Text,Label
"Three correctional facility guards were escorting a restrained federal prison inmate when he became disruptive, requiring the use of force. 
Two guards and the inmate fell onto the Lieutenant's right leg, fracturing his fibula. He was transported to the hospital and released the following day.",1
Employee in the Machine Shop received second degree burns to the back of his legs after the torch he was using exploded.,1
A truck driver fell approximately 4 feet while descending a tanker trailer ladder.  The employee was kept overnight awaiting test results.,1
An employee's leg was pinned between a truck and the powered pallet jack being operated.  The employee was hospitalized for treatment/surgery at Navicent Health.,1
"An employee working on the Line 6 Auto-Beller reached into the machine to unjam two pipes and got his hand crushed, fracturing three left-hand fingers.",1
"An employee was hospitalized after slipping and falling while working as a member of the night freight crew, resulting in an injury to his right elbow.",1
Employee working the flipping machine at the casting line had fingertip amputated after it was crushed by a jammed block.,0
Employee sustained burns during line tie-in operations at an oil and gas site.,1
One employee was hospitalized after being struck by a tire when he was airing the tire up during his pre-drive inspection. ,1
An associate was using a knife to open a bag of chili and cut off her fingertip.,0
"An employee was struck by an excavator on 01/02/2015 and hospitalized for injuries to his leg, several broken bones in his foot, and a fracture in his left arm.",1
"On or about 1/2/15 at 9:10 p.m., an employee was preparing to troubleshoot the hamburger bun bagger machine that was not working. He received an electrical shock when he came in contact with a proximity switch. Employee was working alone at the time of the incident.  He was admitted to the hospital for one day.",1
An employee stumbled and fell to the ground on the left side of her body and was admitted to Irving Baylor Medical Center with a possible hip fracture.,1
"Two employees in a scissor lift were wrecking forms, taking forms down, and removing the forms. They lost their grip on the form, which fell and hit an employee walking below on the shoulder, knocking him to the ground. He hit his head on the concrete, causing a wound to the head, a broken collarbone, and a broken rib.",1
Employee amputated tip of finger when his finger got caught in the chain of a stationary exercise bicycle that he was servicing. There was no bone loss and the employee was not hospitalized.,0
An employee suffered a right index finger amputation. The employee's finger was injured by a thigh deboning machine. The finger was still attached at the time of the incident and was later amputated at the hospital.,0
An employee was injured by a customer's automobile when the car jumped the curb and pinned the employee against the Red Box movie kiosk on the convenience store's sidewalk.,1
"Employee suffered the amputation of three fingers while working on the south in-bed fuel airlock in the energy building. He was using a hammer to hit the outside of the chute to loosen built up saw dust.  The chute leads to an airlock, which feeds the blow line to the boiler. He removed the panel cover over the airlock to see if the saw dust was falling in.  He slipped and his left hand entered the airlock. Contact with the rotating parts in the airlock resulted in the multiple-finger amputation.",0
An employee who was using a cordless circular saw to install wood panels around an elevator lobby received a partial amputation of his left index finger when the tip of his finger became caught in the saw.,0
"On Friday, January 2, 2015, at 10:30 p.m., a crew of employees were changing out wooden decking boards on a platform off shore. One of the employees was walking the platform, slipped, and stepped on a protruding nail that entered the employee's right foot. First aid was applied to the employee, and the employee was later sent to a clinic for treatment. The employee was admitted to a hospital at 3:00 a.m. on January 5, 2015, from swelling on his foot due to the incident.",1
"The employee was coming down a ladder after placing media in a nitrogen generator. Employee missed a rung, fell about 10 feet to the floor, and sustained a compound fracture to the right arm.",1
"Employee tripped on a paver and fractured her wrist, requiring hospitalization.",1
"Employees use a draw machine to extrude wire.  The employee bypassed the guard or disabled it to remove soap build-up on the wire coming from the die. The employee amputated the middle, ring, and pinky fingers on the right hand and the first digit of the index finger. Employee was hospitalized and released. The injury occurred on 1/3/15 at approximately 6:00 p.m.",1
"While in the process of unloading pre-tied mats of rebar, one of the bundles fell off of the tying jig and pinned three workers underneath. Two of the workers were unharmed. A third employee suffered a fractured rib and a fractured vertebra.",1
"Employee lost his nail, skin, and flesh from the tip of his right ring finger while closing the cardboard bailer door.",1
"An employee suffered a trans-phalangeal amputation of the middle finger on the right hand. The employee was attempting to connect two baggage-transferring carts manually by pulling them into each other. The employee placed his hand on one baggage cart and pulled it to the second cart with his other hand in an effort to connect the two. The employee's hand was caught between the two carts, causing a middle finger amputation on his right hand at the first knuckle.",0
"Employee was installing a new cable on a home while working from a Lunar, 28 foot fiberglass extension ladder. A gust of wind made his ladder move and he felt like it was going to fall so he jumped off the ladder toward the grass to avoid the concrete patio and landed on his back.",1
Worker caught a hand in a running conveyor while cleaning and rinsing it. Worker suffered broken radial and ulnar bones in the right arm. The victim was hospitalized.,1
"An employee was hospitalized after being hit by a forklift that was unloading boxes of pulp from a flatbed stationed in the roadway. The forklift backed up and ran over the employee's leg as he was leaving work, resulting in a fractured ankle and leg.",1
An employee was assaulted by a patient (choking) resulting in a multi-day hospitalization.,1
Employee was performing inspection and preventive maintenance on a conveyor line.  His fingertip was amputated in a chain and sprocket when the line started up.,0
An employee was exposed to an amputation hazard while coupling rail cars. He used his foot to align the couplers. His foot slipped and got caught between the two couplers. His toe was smashed when the cars connected.,1
"On or about 1/4/15 at 1:50 PM, employee was slicing ham when a piece of meat slipped, allowing the employee's hand to come into contact with the deli slicer.  Employee lost tip of thumb; there was no bone loss.",0
"On January 4, 2015, at approximately 5:10 p.m., an employee slipped on a wet floor while transporting a patient from one level to another.  The employee experienced a hamstring tear.",1
Employee was descending a work over rig derrick via a ladder when he fell a distance. Employee suffered a lacerated spleen and fractured hip and shoulder.,1
An employee slipped on the ice in the parking lot and hit his head.  He was transported and admitted to Morton Hospital.,1
Employee was burned from his knees up to his lower abdomen after removing the strainer for maintenance on the Scott Unit.,1
"An employee in the #2 steel-producing BOF shop was making ladle additions to the first heat steel of the day on furnace #94 when the materials reacted, causing flames and high heat to come up through the chute. The employee received first and second degree burns to the face, right wrist and forearm, and a little bit on his right abdomen.",1
An employee was hospitalized following injuries sustained while traveling by foot to the locker room. The employee was between the belt shop and the locker room crossing railroad tracks that had recently been covered with snow. The employee either slipped or tripped and experienced three breaks to the ankle and tibia.,1
"Employee was loading a trailer with a forklift when the left leg of the trailer collapsed, causing the trailer to tilt to the left. This caused the forklift and employee to slide to the left, striking the trailer wall and causing an acute spinal injury to the employee.",1
Employee climbed up on a handrail and slipped while cleaning snow off of the framework and guard of a chip belt conveyor. Employee suffered amputation of the right index finger.  Employee was seen at Kootenai Health and was released as an out-patient.,0
"An employee was working on a vehicle being lifted off the ground.  He stepped off the back and fell approximately 4 feet to the ground below.  When the employee hit the ground, he fractured his wrist and was taken to Grady Memorial Hospital where he received surgery.",1
"On or about 1/4/15 at 6:05 pm, an employee was preparing to clean a room and put a door stopper at the room door. The stopper slipped catching her hand between the door and its frame resulting in the amputation of her left index finger.  Employee was taken to the hospital to reattach the finger.",0
"On or about January 4, 2015, an employee was injured while running a gas sample. The employee was dipping out a sample with a sample cup using tongs. When he put the cup in, the hot metal splashed on him, causing burns to the ring finger and little finger on his right hand.  The employee was admitted to the KU Medical Center in Kansas City, Kansas.",1
"A worker slipped on an alcohol foam rug and fractured his hip on January 4, 2015.  He was hospitalized for 3 days and had therapy.",1
Employee was loading plastic pipes onto a utility trailer.  He jumped off the trailer and broke his ankle.,1
A machine operator experienced a fingertip amputation while troubleshooting a jam in the Samuel Strapper machine.,0
Worker tripped over a box at his work station.  He was hospitalized with a fractured bone by his knee.,1
"In a unit office/housing unit where inmates are housed, an employee was seated at a desk when an inmate walked into the office. The inmate punched him first in the face and then repeatedly punched his head. His nose was injured and he lost consciousness. He was hospitalized with a concussion.",1
An employee was operating an electric ride on powered industrial truck (PIT). Employee became pinned between the PIT and a steel racking system while attempting to avoid hitting another employee.,1
"A fire suppression system inadvertently went off, causing a white cloud.  Employees working on a scaffold, 24 feet above the ground, scrambled to avoid the cloud. While descending a ladder, an employee slipped and fell 10 to 12 feet.",1
Employee was working on a fluid end expendable pump using a torque wrench when his left ring finger got caught in between and was amputated - halfway through the nailbed.,0
"Employee was using her gloved hands to clean the glue-spreader machine while it was operational. The doctor rollers were not open, and the employee's glove got caught between the rollers, pulling her hand inside. Her right-hand ring and middle fingers were crushed.",1
A worker splashed caustic water on his left thigh and hand while cleaning the equipment on Line 3.  He was admitted to the hospital the next day. ,1
An employee was climbing stairs to a shore tank to conduct temperature measurements.   The employee fell from the stairs approximately 20 feet to the bottom of the tank.,1
"Employee arrived at client's home, slipped on ice, and bumped her head.",1
"While stairs were being installed using a sky trak at the Plano Assisted Living facility, an employee on the ground who was directing the stair placement got his left index finger caught between a metal stud and the stair.  The employee was transported to Methodist Richardson and had surgery the next day to amputate his finger at the knuckle.",0
"An employee walking from the parking lot en route to his assigned work area slipped, tearing his quadriceps tendon. The employee was discharged from the ER, but later returned to Lake West hospital that evening and was admitted. The employee has since been scheduled for surgery.",1
A tube hill attendant at a winter resort snow tubing hill rode a tube down the hill.  On the way down the tube crossed lanes causing it to flip.  The employee was ejected and suffered a lacerated spleen resulting in hospitalization.,1
Employee's face was burned by hot plastic exploding from an injection molding machine.,1
"On or about January 5th, 2015,at approximately 1:30 pm, an employee was greasing a bearing on the Buffalo roller mill in preparation to roll corn for cattle feed.  The roller mill was being driven by a PTO.  The employees left hand was pulled by a chain into a sprocket, amputating the left index finger.  The employee was transported to Great Plains Regional Hospital with the amputated finger for treatment.",0
"Employee was using a handheld grinder when the blade broke, cutting his left arm above the wrist.",1
"A valve on a metal detector closed on an employee's finger, causing an amputation.",0
The employee's arm was caught at the head roller of raw material hopper Line #1.  The arm was surgically amputated to free him from the bagging machine.,1
An employee received freezing tissue-related injuries when she was sprayed with liquid oxygen while filling portable tanks.,1
"On or about 1/5/15 at 6:30 a.m., an employee was riding a horse back to the barn after completing morning exercises. The horse reared up, could not withstand its weight, and fell over.  This resulted in injury to the employee, breaking his femur bone.",1
Employee slipped and fell fracturing a hip.,1
Snow sport ski instructor was skiing with a guest on the Roundhouse Slope when the employee fell breaking a hip.,1
An employee was exposed to a pinch point hazard when his left thumb was caught between the ST-80 and another metal object.,0
Employee's right foot was crushed and all of the toes had to be amputated at the hospital. He will require a few days of hospitalization and rehab afterwards. The job required pulling back and laying down pipe.,1
"An employee who had just parked was walking through the parking lot toward the building when she slipped and fell on ice, fracturing two ankle bones. She was transported to the hospital and had surgery the same day.",1
"A worker was installing a retaining wall next to Highway 285 when a gust of wind displaced a tree next to the highway. The tree struck the worker, resulting in back, pelvis, and ankle injuries.",1
Employee received electrical burns to the left hand while working on an electrical box.,1
"An employee climbing the loader stairs in the grinder room caught his foot on the metal step tread, fell backward, and cracked ribs.",1
"An employee, who had gloves on, was using a powered drill tool to drill into an unsupported block of wood.  The employee was holding the block of wood in his hands. When the employee actuated the drill, the glove got caught, resulting in a partial amputation of the thumb.",0
"A roofer slipped on the ridge of a roof while securing roofing felt paper.  When he slipped, his nail gun came into contact with his work boot and activated, firing a nail through the boot and into his big toe.  The worker was admitted to Carney Hospital for several days during which several surgeries were performed.",1
"On or about 1/5/15 at 5:30 PM, an employee was admitted to the hospital to be treated for swelling and an abscess.",1
"On or about 1/5/15, at 7:45 AM, an employee supervising the first shift noticed material buildup in the conveyor and decided to clean it.  She got caught in one of the belt conveyors, breaking both her bones from her forearm.",1
"Employee 1 and employee 2 were operating a welding robot in the fabrication department.  Employee 1 was loading a fin bank into the welding cell and was walking backwards into the welding cell while operating an overhead crane. Employee 1 stepped backwards into an open pit and fell approximately 8 feet. Employee 1 sustained the following injuries: fractured pelvis at both hip sockets, fractured ribs, fractured right elbow, fractured right shoulder.  Employee 1 is hospitalized at University Hospital in Columbia, Missouri.",1
"An employee was wrapping meat using an automatic wrapper and putting the meat into a tall/mini shelving rack in the refrigerated market/area. The employee then transported the meat to the sale floor area.  On her way back to the market area, the employee slipped and fell to the floor.  The floor was wet from condensation.",1
Employee using a table saw amputated his right index finger and his right middle finger. ,1
"Employee was walking, rolled on his ankle, and broke his ankle.",1
Employee injured her hip and was hospitalized after she slipped and fell on the wet floor.,1
"On Monday, January 5, 2014, an employee slipped on ice while walking to his work truck at a job site.  The employee sustained an injury to his neck and was admitted to the hospital that day.",1
Employee was walking from her car and slipped and fell in the parking lot. Employee was transported to the hospital by ambulance and was admitted.,1
"On or about January 5, 2015, an employee suffered a partial amputation of the fingertip while using the patty-making machine.",0
"On or about January 6, 2015, an employee was injured while attempting to remove a part that was stuck in the door of the Wheelabrator machine. Once the part was released from the door, the door shut on the employee's finger and amputated the tip of his left index finger.",0
Employee was using a portable hand grinder to cut a steel pipe. The grinder kicked back and lacerated the employees knee cutting an artery.,1
"An employee entered a storage container that contained painting materials at the work site.  Upon entering the container, the employee lit a cigarette in the container, and an explosion occurred shortly afterwards.  The employee was burned on the face and hands.  The employee was admitted to the hospital for treatment of his burns.",1
A maintenance employee received a fingertip amputation while troubleshooting a stuck clamp on a cutting machine on the mechanical spinning line LH2.,0
Employee suffered an amputation of the tip of his left-hand index finger in a pinch point while conducting material handling operations that involved rolled steel on a support stand.,0
A stack of 12 x 4 foot panels of sheet rock in the hallway of an under construction building fell on the employee and broke his leg.,1
"Employee's left-hand distal middle finger was crushed by a pallet jack. When injured, the employee was operating the pallet jack alone while moving an 1800-pound tote container.",0
"Employees were moving equipment into the trailer and removed the stairs to the trailer.  Upon exiting the trailer, an employee forgot the stairs were removed and fell about 3 feet to the ground.  Employee has 2 broken ribs, broken scapula, and a dislocated shoulder.",1
"On Tuesday, January 6, 2015, an employee was struck in the stomach by bushing that was sticking out of a rotary table while operating levers.",1
An employee fell from a stationary piece of equipment while changing a conveyor's pulley belt.  The fall was about 8 feet. The employee was hospitalized with a broken leg.,1
"A worker was hospitalized on 01/06/2015 at 3:30 p.m. After doing some clean-up work on a roof, he fell approximately 8.5 to 9 feet while descending a ladder. The worker fractured his leg  and was hospitalized overnight at Athens Regional Medical Center. He underwent surgery, at which time a pin was inserted in the tibia of the fractured leg.",1
"On January 6, 2015, an employee was working from a ladder, cutting a metal tank into scrap metal.  The employee stepped off the ladder and onto a tank where he slipped and fell. The employee fractured his right ankle and was admitted to the hospital for surgical repair of the fracture.",1
Employee sustained an amputation of two fingers when his hand was caught in the belt and pulley of the hammer mill.,0
"An employee slipped and fell on ice and bumped her head. She was sent to the emergency room, and admitted to the hospital as a precaution.",1
Employee was cutting a 10-foot length of 6-inch PVC pipe into 10-inch sections. He was using a chop saw that was on a pivot because the tool he had been using would not cut the pipe. The employee was using his hand to hold the pipe.  His hand got pulled into the blade.,1
Employee fell from a ladder after removing one foot from the ladder and placing it on a merchandise hook approximately 9 feet above the floor. He landed on his feet and injured his left knee.,1
"Employee received burns to his left index finger and portion of his left hand, while performing routine service on a plastic mold injection machine. Employees needed hospitalization at University of Rochester Strong Hospital.",1
"Employee was walking in the warehouse and was struck by a forklift that was carrying insulation. The employee's head hit the ground, and the employee was hospitalized.",1
"An employee fell on ice, causing an abrasion on his left elbow. The abrasion was followed by cellulitis and a bursal abscess.",1
An employee sustained battery acid burns to the face while attempting to start an air compressor on the back of a service vehicle by boosting the battery with jumper cables.,1
An employee was injured when the brakes on a seven-car string of loaded boxcars let loose. The cars rolled into a four-car string of empty boxcars.  The impact knocked an employee off the four-car string and he fell on the ground. The employee was hospitalized for lacerations.,1
The worker stepped on a floor joist and fell 10 feet. The worker sustained a broken leg and was hospitalized.,1
"An employee was offloading a tractor trailer when the forklift being operated by a Pika Energy employee picked up a piece of cargo and pinned the employee between the cargo and the trailer wall, resulting in numerous serious injuries.",1
"On January 6, 2015, a worker sustained a fracture to the right ankle after slipping on ice at a construction site located at 17400 N. 84th Street, Lincoln, NE  68517.",1
Employee was injured while repairing a forklift in the receiving department. The employee was caught between the forklift's mast and cage while reconnecting a hose. The employee was hospitalized overnight with a crushed or bruised vertebrae.,1
"The employee was working from a stage table, approximately 2 to 3 feet above the ground.  The employee fell, breaking his hip.",1
"Employee was collecting shoes for her customer in the shoe stockroom when she tripped over a fitting stool sitting on the floor. She fell to the floor, fracturing her right ankle.  She was carrying four boot boxes and could not see directly in front of her.",1
"Two employees of 4 Swift Service passed out in a tank that was being cleaned.  Employees proceeded into a tank which had been closed, but was opened by an employee.  Employees went inside to clean, but were supposed to clean the outside of the tank only. Both employees were transported to the hospital, but only one employee was admitted.",1
Employee's garbage truck struck electrical lines hanging low in the street.  Employee climbed up approximately 10 feet to untangle the wires when he fell to the ground.  He broke his left leg and has small fractures in his neck. He was admitted to the hospital.,1
"On January 6, 2015, at approximately 11:30 p.m., an employee was performing a change over in the secondary turn cell when the clamp/unclamp feature was activated. The employee's fingertips on both hands were caught behind the chuck of the lathe. On the left hand, the third and fourth fingers were amputated.",1
Employee's left thumb and finger were injured while using a router.,1
Employee was cleaning paper underneath the Core Machine while it was running. The belt drive snagged her arm and broke it.,1
"An employee was visiting a patient's home. Upon entering the fence of the patient's yard, one of the patient's dogs attacked the employee. The employee received several dog bites.",1
The employee was installing block on a V8 line. The employee had been using a lifting chain and shipping nipple to place a V13 block on a shipping skid. The employee's hand got caught between the lifting chain and shipping nipple when the weight shifted and the chain slipped. The tip of the employee's left ring finger was amputated between the end and the first knuckle and the left middle finger was fractured.,0
Employee operating a forklift was injured when he stuck his arm out of the forklift cage and it was struck by a company vehicle.,1
"Employee was pulled into a machine, causing a broken arm. Hospitalized for surgery.",1
"Employee received a broken right tibia when he entered a belly dump trailer to remove coal ash that was stuck to the inside walls. The dump gates lost power, causing them to close on the employee's leg.",1
"An employee was using a circular saw to cut a piece of aluminum to make repairs on a dump truck when the saw kicked back, striking the employee on the right side of the neck.  Sutures were required, and the employee was admitted to the hospital.",1
"Employee was using a 5-6 ft extension ladder to access an exterior light fixture. Upon removing the light fixture, the fixture broke free of the wall and fell towards the employee's face. Employee attempted to dodge the falling fixture, causing him to lose his footing on the ladder. He fell from the ladder and was hospitalized with fractures to both bones in his right ankle.",1
Worker was burned by hot ash that blew on his face when he opened the ash hopper panel.,1
While testing a main rotor head an employee reached in to remove a piece of tape and the hinge started to move into the fold position.  The employee's fingertip was in a pinch point at the time and the tip of the finger was amputated at the first knuckle.,0
"Employee was constructing a wooden pallet skid lift when the nail gun he was operating fired twice and injured his finger. The injury was underneath the employee's thumb. The employee was transported to the hospital, stayed overnight, and had surgery on his finger.",1
Employee fell on ice and struck his head while delivering a parcel.,1
"On or about 1/7/2015 at 12:00 PM, employee working on a construction site was using a metal rebar to repair a broken hinge on another company's truck that was on site delivering soil material.  Employee was standing at ground level while attempting to bend the rebar. The metal rebar broke, resulting in the employee falling to the ground. Employee sustained fractures to his right hip; he was hospitalized and had emergency surgery.",1
"An employee tripped on a floor mat, fell, and fractured the hip resulting in hospitalization to surgically repair the hip fracture.",1
An employee's finger was amputated in the Meat Processing department while using a band saw to cut meat.,0
An employee fell in the ladies restroom fracturing the femur in seven places. She was hospitalized as a result.,1
"Employee was operating a horizontal drilling machine when the drive shaft came loose and hit the guard. This broke the guard, which then hit the employee's seat.  The employee was knocked off the machine.",1
"Employee slipped on black ice and fell in the parking lot on Jan 7, 2015 @ 8:00 am.  He broke his ankle and had to have surgery.",1
"On Wednesday, 01/07/2015 at 3:45 a.m., an employee working on the 180 L Differential Assembly machine and the conveyor belt system dropped a wrench. In an attempt to retrieve the wrench from between the conveyor system and the 180 L Assembly machine, her right arm was caught by the 180 L machine, resulting in a laceration and an overnight hospital stay.",1
"Employee was crushed by falling sheetrock while it was being moved at a renovation site located at 205 Boulevard, Roland, Oklahoma. The sheetrock was leaned in an upright position, totaling 17 sheets or 1,360 pounds. The material fell on the employee's legs and crushed them.",1
"Employee fell 8 feet from a ship's ladder, injuring his head and back. He required in-patient hospitalization.",1
"The worker was cutting the tip of a tube of material with a utility knife. The knife slipped and the tip of the worker's left index finger was cut off. 
Urgent care stitched on the tip of finger and there was no lost time. The worker was wearing gloves.",0
"Employee #1 was removing coffee beans from the hopper while the screw conveyor was off. When Employee #2 went to a separate room to turn on the roaster, the screw conveyor was also turned on. Employee #1 was still removing coffee, and the screw conveyor cut off his right hand at the wrist.",1
"An employee was attempting to close a door to a loading booth he was working from. The door closed on his hand, resulting in an amputation of his right-hand little fingertip.",0
An employee sustained a broken left tibia from a slip and fall while walking back to the UPS truck after picking up a package.,1
Employee sustained crushing foot and knee injuries when a 4' x 6' steel semi-truck loading dock plate fell on top of the employee. The event required hospitalization of employee who is currently undergoing knee surgery and estimates are he will be in the hospital for two to four days.,1
"Employee was descending a 10-foot ladder and was about halfway down when he missed a rung and fell off the ladder. Employee landed on his left side and hit his head on the paved surface below.  At the time of the incident, the employee was on the ladder outside removing sealant from the wall of the Metropolitan Medical Facility.  The employee was transported and admitted to Samcee Hospital. The employee received stitches in his head and sustained a lower back fracture.",1
"An employee had his ring finger amputated when a heavy part being lifted and strapped on a forklift fell off. This caused the part to fly up on the other end where his hand was placed, striking his hand against a guillotine blade.",0
"On January 7, 2015, employee sustained a hand injury while working on or near a conveyor belt while performing maintenance activities.  The employee was admitted to the Medical Center of the Rockies in Fort Collins on the same day.",1
"An employee suffered an amputated thumb and potentially finger(s) from an injury that occurred on January 7, 2015.",1
Laundry employee was sorting laundry and tripped over laundry on the floor.  Employee fell onto the floor and fractured the right hip.,1
Employee cut his right hand between the thumb and index finger while using an alligator shear machine. Employee was taken to the hospital with possible nerve damage. Surgery was required.,1
"On 01/07/15 at 6:45 pm, an employee's  middle index finger was amputated while unclogging a pipe of the dust collector system.",0
Employee was hospitalized due to a slip and fall in parking lot resulting in a fractured leg.,1
Employee suffered a partial amputation of the thumb while working with a band saw.,0
"On January 7, 2015, at approximately 12:00 p.m., an employee was using a ladder to install an electrical conduit to be used for the new emergency exit signs, which were to be installed in the warehouse as well. The employee fell off the ladder and was taken to Del Sol Medical Center where he was admitted.",1
Employee's finger was amputated when he placed his hand in a pinch point during a test.,1
Employee inserting food product (chicken) into an oven suffered burns when the employee came in contact with the oven door.,1
Employee fell approximately 10 feet from a ladder while working on a tanker truck hatch. Employee injured the wrist and face.,1
"An employee was grinding a long seam of a steel shell using a handheld grinder.  Completing work for the day, the employee pulled back on the grinder and dropped it, causing it to kick back and hit his right index finger.  The wound was immediately wrapped and the employee was brought to the hospital.  The employee had surgery to amputate a portion of his finger.",0
Employee fell from a ladder and was hospitalized.,1
"Employee was injured in the fish preparation area when he placed his hands on the chain puller to unload racks from the precookers. The second and third fingers on his left hand were caught in the chain, and his fingers were crushed.",1
An employee was hospitalized for 3 days after his arm was caught in a conveyor belt machine on 1/7/15. ,1
Employee was power washing a building and the hose had disconnected causing severe facial lacerations. Employee was admitted to the hospital.,1
"At the No. 2 White Liquor Clarifier Tank, two employees were working on a mixer on top of a large tank to replace the gear box that rotates the mixer.  The employees removed five of the eight bolts from the flange when the flange fractured through the bolt holes of the three remaining bolts causing the unit to rotate about 10 degrees (6""). The gear housing struck one of the employees on the right leg and fractured his femur.",1
An employee working in the parts department was dragging boxes from the outside to the inside of a warehouse when the boxes got caught on a stack of tires.  The employee lost his balance and fell to the ground.  The employee was transported by ambulance to Baylor Hospital Dallas where he was hospitalized with a hip fracture.,1
Employee was working on the PACO Re-Cutter Single Spin when the right index finger was amputated.  EMS took the employee to York Hospital.,1
An employee was hospitalized on 01/07/2015 after he fell from a ladder and broke a rib.,1
"Company employee was behind the store preparing to receive goods from a delivery truck.  While attempting to guide the truck back into the company's offloading dock, he was pinned between the truck and a railing.",1
"Employee was utilizing a portable band saw ""laydown saw""  to cut aluminum to be used on belt trailers when he cut the tip of his middle finger on the right hand.",0
"Employee spilled water on the floor while making coffee. Employee then slipped and fell, breaking her left upper arm requiring surgery.",1
"Employee was on the side of the derrick untying tubular when his fast line became caught up in his SRL. The employee was pulled away from the ladder.  The SRL stopped and so did the anchor.  Therefore, no fall resulted. The employee received contusions to the head, ribs, and chest area. He also suffered bruising to the brain and lungs and received six stitches to the forehead.  He did not lose consciousness.",1
Employee received a crushing injury to the end of the thumb that required reconstructive surgery.,0
"On or about 1/8/15 at 12:10 a.m., an employee was working between two boxcars located on a private railroad when the cars began to move.  The employee tried to get out from between the cars when one of the cars pinched his left foot, resulting in fractures.",1
An employee was cutting a piece of wood when he slipped and made contact with the rotating blade on a DeWalt miter saw.  The employee cut off the tip of his right index finger.  The employee was taken to UPMC East for treatment.,0
"On January 8, 2015, an Abilene Reporter-News employee was working with the large printing press in the company's press room. He stuck his hand into the roller system and had the skin on his right hand removed (""gloved"") by the machine. The employee was taken to Hendricks Medical Center in Abilene, Texas, where he was awaiting surgical intervention.",0
Employee was adding a steel bar to the induction furnace when it flared up and splashed hot metal on the employee.  Employee was taken to Lehigh Valley Hospital. ,1
"Employee was troubleshooting a monorail lift station.  A pneumatic hoist rail on a cylinder was lowered to troubleshoot the equipment. It caught the tip of the employee's boot, fracturing two toes on the right foot.",1
"On 01/08/15, employee suffered an amputation of the left index finger while operating a mulch machine at a well site.",0
An employee slipped and fell on  ice while walking in the yard to retrieve parts for a machine.,1
"Employee reached under the guard on wrapping equipment to remove a bag that was snagged. He caught his finger in the chain and sprocket, cutting the tip of the finger.",1
"Employee was removing concrete debris when he removed a piece of plywood that had been secured to cover a floor hole. Upon removal, the employee stepped and walked through the hole, falling 17 feet to the lower level.",1
Employee used a derrick with a tong to unload a utility pole out of a storage area on the ground. The pole rolled onto the employee's leg as he tried to reorient the tong. The left fibula was broken.,1
"Around 10 am yesterday morning, an employee fell from an aerial lift while working on a pellet unit.",1
Employee received an embedded tack in her thigh when walking by a pintacker. Employee had the micro pin tack surgically removed from her thigh and was admitted to the hospital overnight.,1
"Employee working on a ladder was knocked off and landed in a pile of construction debris. Employee sustaineda broken collarbone, eye socket, and skull.",1
An employee fell from an elevated structure.,1
"At the facility shop area, an employee tripped over his feet and fell on an industrial sized valve stem used in hydrofracking (a piece of sharp equipment) and lacerated his abdomen.  This injury required hospitalization for two days.",1
An employee was working on the second floor of the inside section loading material. He fell out of a window opening onto the pavement and fractured his wrist.,1
"Employee was working from the derrick monkey board latching and unlatching tubing. As he was unlatching the elevator that has horns and a locking mechanism, the employee's harness got caught on the horns. The horns pulled the harness and pulled him down causing small fractures in his knees that required surgery.",1
The employee amputated her right pinky finger when a trash room door shut on her finger.,1
"Employee was exposed to fall hazards when he fell 6 feet from a ladder to the ground level. Employee was not wearing proper 
PPE when working at the frac tank located to the rear of the winch truck at the yard.",1
Employee working from a ladder on live electrical circuitry received an electrical shock during testing and service installation. The employee fell from the ladder.,1
"Employee slipped and fell, fracturing her left hip. The facility had contractors replace the ceramic floor tile, and the employee slipped and fell on a walking and working surface.",1
"On or about January 8, 2015, an employee fell and broke her leg in two places when she slipped on ice in the parking lot.  This resulted in an overnight stay in the hospital.",1
"An employee was driving a Toro cart, lost control, and hit a tree.  The employee was unconscious and was air-transported to Atlanta Medical Center where he was admitted in critical condition.",1
"On January 8, 2015, an employee's hand was injured when a gate came down on his hand while pushing birds out of their nests to gather eggs. The employee was admitted to the hospital on January 9, 2015.",1
Employee installing form work on a concrete wall was struck by a forklift.,1
The injured employee was hit by a forklift below the knees. He sustained a broken left leg.,1
"On or about January 8, 2014, at 10:40 p.m., an employee was hospitalized for burns after cleaning the juice processing tank. He was burned on his forehead, abdomen, hands, thighs, and ankles when hot steam blew out of the tank, struck him, and forced him off the 8-foot ladder that he was using to perform his daily task.",1
An employee was injured on a reach truck.,1
"On January 8, 2015, at around 11:45 am, an employee working at 22nd Terrace and 3rd Avenue SW, Miami, Florida, was performing tree-cutting operations on a bucket. While cutting tree limbs, he cut his hand with a  chainsaw. The employee was admitted to the hospital to determine if ligament damage had occurred.",1
Employee fell approximately 10 feet while climbing down an extension ladder located inside a 6000-gallon tank.,1
"On January 8, 2015, at approximately 8:40 PM, an employee's leg was caught between a tugger and rolling stock another employee was moving.  The employee was taken to the hospital where he was admitted due to a possible fracture and swelling.",1
Maintenance employee was adjusting the level of shipping roll-up door #34 when his right middle finger became caught in the chain and sprocket.,1
Employee's finger got caught in the jaws of the bagging machine located in Line 3 of the plant. This resulted in the partial amputation of the tip of the left index finger.,0
"Employee was moving a big blower blade by pulling on the fan belt. The machine was off and had proper lockout/tag out. He was there to diagnose a vibration problem on the HVAC. When pulling, his hand got trapped between the pulley and the belt. He dropped his hand and severed the ring, middle, and pinky fingers on his right hand. Each finger was amputated above the joint and was approximately less than 1 inch.",0
"On January 8, 2015 at 10:15pm, an employee was cleaning/unclogging an automatic in-line cement powder sampler.  He used his finger to verify there was no longer a clog and the sampler actuated amputating the tip of the third finger on the employee's left hand.",0
Employee severed finger when an industrial metal door closed on his pinky finger.,0
"An employee was setting a string of four railcars in the yard with his groundsman. The groundsman secured the ground hand brake on the first railcar and unhooked the string from the railcar.  The employee noticed a railcar starting to move as the manual ground brake on the first railcar failed.  He attempted to set the brake on the second car when the railcar wheel smashed his steel toe boot to the ground, fracturing his right foot and removing a toenail.",1
"An employee fell from an 8 foot high staging (pedestrian screen). 

Employee injured his tail bone and was hospitalized.",1
Employee cut hand on vacuum and was hospitalized.,1
An employee amputated a finger tip while using a band saw.,0
A JP Hogan employee had three fingers amputated on 1/9/2015 while working with a Husqvarna walk-behind concrete saw.,1
"Employee experienced a crushing injury to her left hand, leading to an in-patient hospitalization at Froedtert Hospital at the Medical College of Wisconsin. She reached around an interlock guard on the pin roller machine.",1
An employee fell on uneven concrete walking from the ER and broke her left wrist.,1
"Worker was installing ductwork from a 6-foot ladder, lost his balance, and fell 15-feet through the elevator shaft. He broke both arms and his nose.",1
"A propane-powered space heater was used inside the cab of an elevated crane during workplace operations. The space heater leaked, resulting in an explosion and fire. The employee who was trapped inside the cab sustained burns to the face and hands.",1
"On or about January 9, 2015, an employee incurred a puncture wound to his left hand when he was enlarging a hole in a can with a ""tapper"" hand tool.  The tapper, which he held in his right hand, went through the can into his left hand. The injury resulted in an infection, requiring hospitalization.",1
"On January 9, 2015, an employee in the bulk pasta area had the tip of his finger amputated while helping another employee replace the 200- to 250-pound mixer screw. His finger got caught between the mixer and mixer screw.",1
"On or about January 9, 2015 an employee went to warm up their vehicle and while returning into the facility, slipped on ice.",1
"On 1/9/15 at 5:45 a.m., a temporary employee of Labor Finders was operating the out feed of the gang saw and reached over to grab a board with the left arm. The employee's clothing became entangled in the rotating shaft. The employee lost the left arm and was hospitalized at Macon Medical.",1
Employee pinched the skin on her finger with a door knob.,1
"On or about January 9, 2015, an employee slipped on ice on the rig floor. He put his right hand out to break his fall. His right index finger was caught between the stump and the Kelly ripping skin off the fingertip. 
The employee was treated an his hand was wrapped in gauze and he returned to work. On or about January 19, 2015, he had surgery and the finger was amputated at the first joint.",0
"An employee's left hand was crushed on January 8, 2015, while using a punch press to assemble parts. The left pinky was amputated the following day on January 9, 2015.",0
A worker fell while exiting a van used to transport him to his designated work site.  He suffered a fractured right femur and will undergo surgery in the hospital overnight.,1
Employee incurred a partial amputation of index finger on left hand while operating a splitting saw.,0
Employee in the back of a trailer amputated his thumb while catching a falling pallet truck by the wheel well opening.,1
"An employee was exposed to falls in excess of four feet while working from a ladder to install a communications cable. The ladder slipped, resulting in the employee suffering a fractured tibia.",1
"On or about January 9, 2014 at about 0535 hrs an employee of Propetrol Services Inc. was repairing a pump at the Mabee 139-202 HA well site 10 miles north of Midland Texas. When he reached into the pump to repair a faulty plunger, the unit ""kicked"" and amputated the tip of his right middle finger. He was driven to Medical Center Hospital in Odessa Texas where the prognosis was that the flesh portion not the bone will be amputated.",0
An employee sustained severe injuries and was hospitalized after he fell approximately 15 feet from the top of the AOD vessel.,1
"On or about October 8, 2015, at 1135 hours, a worker for Hilmar Cheese Company was unhooking a hose from a truck that he thought had finished unloading heavy cream. The truck was still loading and the hose was under pressure. When the worker unhooked the hose, the valve slammed shut on his finger. The worker was taken to Dalhart Memorial Hospital and later to BSA Hospital in Amarillo, where the distal phalanges of his right index finger were removed due to the extent of his injury.",0
"Employee was moving pieces of wood into the hospital and incurred a splinter to his hand.  He removed the splinter and a cellulitis infection occurred, requiring hospitalization for treatment.",1
"On January 9, 2015, an employee was walking down the steps at the customer's private residence when he slipped and fell, landing on the sidewalk.  The employee suffered a broken back and five broken ribs. He was hospitalized as result of the accident of January 9, 2015.",1
Employee was hospitalized due to injuries sustained from rolling over a landfill dozer.,1
"A worker was providing instructions to two skid steer operators regarding the removal of frozen cattle feces from two cattle lanes. The skid steer operators where side by side, preparing to start the removal process when skid steer operator A honked his horn to get the attention of operator B.  At this time, the worker was walking away from the operators and returning to his truck.  The worker thought the horn was to gain his attention so he turned and walked up to skid steer operator A.  Skid steer operator A did not realize the worker had approached his skid steer and the skid steer began moving in the forward direction.  The worker's left leg was struck and run over by the rear wheel of skid steer A resulting in a fracture to the tibia and fibula.  The injury required surgery and in-patient hospitalization.",1
"Employees were installing wood trusses on the interior 4th floor level of a newly constructed multi-family dwelling when one employee fell approximately 9 feet to lower level. The injured employee's head struck a nail gun that he was operating when he hit the floor. The injury occurred on January 9, 2015, at approximately 1 p.m.",1
An employee suffered an amputation while working in the facility.,1
"On 1/9/15 at 3:45 p.m., an employee was laying cable on a flat roof and stepped through a skylight. The employee fell 20 feet, fracturing the right ankle. Employee was hospitalized overnight after surgery.",1
"Employee was exposed to hot sparks from furnace number 1 in the melt shop, which resulted in his clothing catching on fire. The resulting fire caused second degree burns to the exposed employee and he was hospitalized due to burns.",1
An employee crushed his finger between a 55 gallon drum and a flat bed trailer. The tip of his left index finger was later amputated at the hospital.,0
"On 1/10/15, at approximately 5:15 a.m., an employee was cleaning in the Planer Mill.  He was struck by the hood while cleaning with compressed air. The employee suffered two fractured ribs and a fractured vertebrae.",1
"An employee slipped on ice formed on steps of a residential home when delivering mail, which resulted in a broken arm that required hospitalization.",1
An employee was cutting pipe with a torch. The employee was struck on the foot by falling pipe when the pipe was cut through and the brace supporting it fell.,1
"On Saturday, 01/10/2015, at approximately 2:15 p.m., an employee was changing out a large piston when a failure occurred, crushing/smashing three of the employee's fingers on his left hand. The employee was hospitalized and underwent surgery on 01/11/2015.",1
Employee was pulling shavings on a winder at the trim chute and contacted the trim slitter suffering an angled cut to the nail bed and tip of the right index finger.,0
Employee slipped on ice.,1
The employee was exiting a patient's private residence and slipped and fell on the wet wheelchair ramp.  The employee broke her left leg.  The incident occurred on 1/10/15.,1
"On January 9, 2015, an employee operating the dough rolling machine got his index and second finger caught between two rollers (dough breakers), which smashed his fingers. The employee was hospitalized overnight and required surgery.",1
Employee fell through a gate approximately 10 feet to the ground below. Employee suffered a head injury and 17 fractures.,1
"An employee, who was assisted by two other employees, hurt her back while giving an aggressive resident a bath.",1
"Employee in packout area was working with a crane. During a lift, the employee got caught in a chain. The crane's chain hook grabbed a loaded box, which fell on the employee, crushing and breaking the employee's left leg.",1
"Employee delivering mail slipped on ice, falling on his right leg. He was taken to the hospital by ambulance and admitted for surgery, which required overnight admission.",1
Employee fell and broke her left hip while trying to reach for a broom to kill a spider.,1
A CNA developed an abscess.  The abscess was surgically removed and tested. The results of the test showed that it is MRSA.,1
A reporter slipped and broke two bones in her left ankle while reporting on hiking at the Palisades Interstate Park in Alpine NJ. She was hospitalized overnight.,1
Employee injured left leg while working with a chain saw. He was cutting a branch at the end of the day when  the saw sprung back.,1
A psychiatric patient hit an employee with a closed fist on the left-side forehead above the eye.,1
"While loading a telephone cable, an employee's fingers were caught between reels. Employee was admitted to the hospital and surgery is scheduled to be conducted on 1/12/2015.",1
"Employee slipped on ice and broke femur while working on well site in the vicinity of the Anderson 1-4-H location near Williston, North Dakota.",1
Employee was injured when he fell 20-40 feet from an elevated man-lift.,1
Employee was pulling a cart when the handle broke. Employee fell on her back and injured herself.,1
"Using a metal lathe, a maintenance worker was polishing a shaft. The shaft kicked back and the maintenance worker was struck in the arm and hand by the shaft. The employee was admitted to the hospital for surgery to repair the fractured arm.",1
A temporary employee fell from the second story of a building under construction and was transported to the hospital with a back injury.,1
"An employee was walking a cart in the parking lot toward the soccer field when the cart started to roll away from him.  The employee tripped and fell, hitting his head/neck on the curb in the parking lot.",1
"Employee tripped, fell over a pallet, and broke femur. Employee was hospitalized for surgery.",1
An employee was hospitalized after breaking his ankle. ,1
"On January 12, 2015, at 0745, a maintenance employee pulled a carriage saw out too far and the 350-pound saw fell to the floor, crushing his left fifth finger.  He was treated and released at Pomerene Hospital with an orthopedic surgical consult. Surgery was performed on January 14, 2015, however, the last joint of the left fifth finger could not be salvaged and was amputated.",0
Employee's right index finger was partially amputated when it was caught between a ball and seat on a small lathe at the facility.,0
"An employee was injured after tripping over a stationary pallet, requiring medical assistance at the scene and transport to Hackensack Medical Center for further treatment.",1
"Employee's finger got caught in a machine's drive belt resulting in an inpatient hospitalization and surgery. 

Temployee may lose the finger.",1
An employee suffered a fractured hip when he slipped and fell on a patch of black ice in the parking lot. He was taken to the hospital and underwent surgery for the hip fracture.,1
Worker operating a Formax machine sustained a finger amputation while attempting to clean out an overflow pan under the machine.,0
A worker fell approximately 9 feet from a scaffold platform to the ground below sustaining a compound fracture to the jaw and a punctured liver. The scaffold plank bridged over the apartment breezeway and was supported by two walls that were approximately 6 feet apart. The platform was used in setting the rafter trusses.,1
Employee fell off of a ladder that was placed on an uneven surface. The employee sustained a broken knee cap.,1
"An employee was operating a lull (large fork lift) to move steel when he went off the road and drove over soft coal. The right side wheels left the ground and the truck tipped over, resulting in broken ribs and hospitalization.",1
Employee was walking through the department and fell.  Employee suffered fractures to the arm and knee and was admitted to the hospital.,1
Employee slipped and fell on ice breaking a leg.,1
"An employee working at the crate loader was struck by a forklift that was backing up. The employee sustained serious injuries and was hospitalized at the Washington Regional Medical Center in Fayetteville, Arkansas, for treatment of a fractured pelvis.",1
Employee was changing drill bits on a pocket boring machine. He set his hand down on the machine to look under it and his hand engaged with the drill bit.,1
Employee was unloading a trailer and slipped on ice in the parking lot and hit his head.,1
Employee fell from a step ladder while assembling furniture.,1
Employee received burns on hands.,1
"An employee was walking out of the store when she missed a step, tripped, and hit the Z rack that is placed against the wall.",1
An employee slipped on ice in the shopping center's shared parking lot while walking to lunch.  The employee was hospitalized due to a broken kneecap that resulted in surgery.,1
An employee slipped and fell on the ice resulting in a broken ankle.,1
"Employee was testing a meter with an 8-ft shotgun stick in an energized zone and encountered an arc flash. This incident occurred at approximately 8:00 AM on January 12, 2015. The employee was hospitalized with 2nd and 3rd degree burns. The employee was authorized to be in the energized zone and was wearing flame retardant clothing, a hard hat, safety glasses and a high-visibility vest.",1
"Employee was sent to Industrial Piping  Steel Co. in Corpus Christi, Texas, as a temporary worker. He was operating a machine to cut metal and had a finger amputated. He was then taken to the hospital.",1
"On or about January 12, 2015, an employee was injured while loosening the bolts of a rod and collar assembly on a manual assist arm. A component fell and struck his hand, amputating the tip of his left little finger.",0
"An employee delivering sodium hypochlorite attached the hose to a tank containing sulfuric acid, causing a reaction.  The employee was admitted to the hospital with respiratory distress.",1
"The employee was tightening a belt on the wood chipper. After the repair, the employee turned the machine off. While the machine was coasting to a stop the employee got his left hand caught between the belt and pulley of the wood chipper, resulting in the amputation of two fingers.",0
Employee suffered an amputation injury while working on a garbage truck.,0
"The employee was attempting to rig a steel beam with a chain sling and overhead crane. While attempting to rig this elevated beam, it fell towards the employee. The employee tried to brace/stop the beam with his hand and the fore of the beam pushed him back, striking his face and chest as well, knocking him into another steel beam.  The employee was admitted to the hospital with a broken wrist. Surgery was performed to correct the injury to the employee's wrist. 

The injury occurred in the Welding/Fabrication shop.",1
"Worker was caught between the dock bumper and a truck, resulting in crushing injuries to the worker.  The worker was hospitalized.",1
Employee was breaking a bolt with a crescent wrench and it slipped.  The employee fell back and rolled onto the leg fracturing the ankle.,1
"On January 12, 2015, an employee caught his right thumb between a powered roller and conveyor belt, which resulted in an amputation of the nail portion of the thumb.",0
Employee partially amputated index finger with sledge hammer. ,0
Employee was walking and slipped and the employee's arm caught fire. Employee was hospitalized for burn injuries.,1
Employee fell from scaffolding at a height of approximately 15 to 20 feet.,1
Employee lacerated his left hand with a high-pressure water gun after losing his balance while cleaning the rubber membrane off of the inside of a tank.,1
Employee retrieving parts from a shelf was struck in the head by a part weighing approximately 40 to 50 pounds when the bottom of the box it was stored in gave way. Employee sustained a compression fracture of the vertebrae.,1
"Employee sustained a puncture wound to his hand from an air nail gun while setting trusses in the vicinity of 8000 East Highway 42 in Sioux Falls, South Dakota.",1
An employee was hit by a forklift at the loading dock.,1
Employee was removing a flow line from preventer to mud tank.  The flow line pinched the employee's finger between the flange and the BOP causing the amputation.,0
An employee slipped on a step and fell forward injuring both knees.,1
"An employee slipped on ice and fractured his ankle.  He had corrective surgery, requiring hospitalization.",1
"The injured employee was installing a back flow preventer in the vertical. The employee was using a chain fall and attempting to place a gasket between the piping. The chain fall ""jumped"" and the pipe landed on his left thumb, which was resting on the pipe's flange. The tip of this left thumb was amputated at the nail bed and could not be reattached. 

The incident occurred in the Ag Building fire pump room.",0
The employee was sitting on the forklift and trying to close the container door from the forklift.  The wind was blowing and blew the container door closed.  The tip of the employee's finger was caught between the container doors.,0
"Employee was moving pallets by hand, wearing heavy cloth gloves. A piece of wood penetrated his glove and cut his left thumb.  The incident was not reported at the time of the incident.  On January 20, 2015, the employee called his supervisor and reported that his thumb was infected and he had been admitted to the hospital.",1
The employee fell as she was coming out of the restroom of the building's lobby.  The employee fell to the ground and broke her hip.,1
"On or about January 13, 2015, at about 8:05 p.m., a temporary worker was hospitalized for a compound fracture. His arm got caught in and crushed by the rubber bucket mill rollers after his sleeve became caught in the machinery. He has had surgery for the injuries sustained.  He was employed by Aerotek, Inc. and placed at the Trelleborg Wheel Systems dba Maine Industrial Tire LLC Red Lion worksite.",1
Employee was struck by an avalanche of waxed corrugated paper resulting in an in-patient hospitalization and compound fracture to employee's left arm.,1
"On January 13, 2015, an employee was working at a residential site and fell 5 feet from a ladder onto the ground.  The employee was hospitalized overnight and had surgery on the arm on January 14, 2015.",1
"On January 13, 2015, the employees were in the process of changing a heater treater tube. The leaking fluid ignited causing severe burn injuries. One employee was sent to the Minnesota burn unit. ",1
An employee slipped and fell on the ice. The employee is hospitalized and awaiting surgery for a broken ankle.,1
An employee was burned while cleaning a cooking griddle.,1
An employee oiling a chain on a manure spreader had his glove caught in a pinch point. The employee suffered an amputation to the right index and middle fingers at the middle knuckle. ,0
A truck loader was being used to load a dump truck with concrete. A piece of rebar was sticking out of the side of the truck. The driver and injured employee tried to manually put the rebar up on the truck. The employee saw some rebar on the ground and went to kick it out of the way of the driver so he wouldn't run over it. The rebar sticking out of the truck became dislodged and hit the employee in the left eye.,1
"Employee was performing maintenance on the Draw Tape Conversion #14 machine and removed the side panel to grease the sprocket and chain without locking out the machine, which was still running.  As he attempted to wipe down the sprocket with a rag, it got caught in the sprocket and pulled his left hand in, causing three fingers to be amputated: two fingers down to the nail, and one below the first knuckle.",0
An employee fell to the floor while moving a pallet jack during material handling activities. Employee suffered a broken pelvis.,1
An employee lifted the guard on a table saw. His right hand came into contact with the moving saw blade amputating four fingers.,1
"An employee was injured and admitted to the hospital due to being struck by equipment during the movement of pipe while working on a work-over rig in Northeast Colorado. The accident occurred on November 13, 2015 at approximately 1:20 pm.",1
An employee fell 12 feet from an aerial lift while laying ornamental sheet metal. The employee sustained a broken vertebrae.,1
"On January 13, 2015, at approximately 3:00 PM, Employee #1 was using a vacuum hose inside a tank when the vacuum caught his hand and pulled his arm in.  The vacuum was caught on Employee #1's arm for approximately 15 seconds before he alerted Employee #2, the attendant operating the equipment, who turned the vacuum off.  Approximately one hour later, Employee #1's arm began to swell.  He was taken to the hospital, and the swelling continued.  Incisions were made into the arm to relieve pressure, and the employee was admitted overnight.",1
"On or about 13 Jan 2015 at approximately 14:30hrs an employee fell approximately ten feet from a platform above a ceiling to the ground below suffering a fracture to his L1, cracked ribs, and broken teeth.",1
Employee was sprayed with hot water from the condensate return line while steaming a railcar.  Employee incurred 2nd degree burns to the right thigh and knee.,1
"Employee was loading cargo in a chassis. While he was exiting the container, the chassis rolled away from the warehouse dock.  The forklift forks fell to the ground between the dock and the chassis and pinned him underneath.  The employee was pinned between the forks and the ground.  He was freed by the paramedics and transferred to Methodist Hospital downtown upon his request.",1
"An employee was working at Extruder #2 (piece of equipment used to melt plastic).  As equipment was started up, a piece of equipment blew off the machine and hit the employee in the leg.  The leg was severely gashed. EMS was called and the employee was transported to UMass Medical Center in Worcester, MA.",1
"On or about January 13, 2015, a maintenance employee of Cintas received a chemical spray of sodium hydroxide to the eyes and face requiring hospitalization.  The incident occurred during offloading of the sodium hydroxide from a contracted delivery service's truck (Hydrite).",1
Employee suffered an amputation on his left index finger while cutting conduit on a portable band saw.,0
An employee was making a connection with a drill fork when the speeding wrench struck the left hand smashing the middle finger on that hand.,0
An employee amputated the tip of his right index finger while operating a Kaster Vertical Saw in the saw department in the morning on 1/13/15.,0
An employee was struck in the shin by the fitting of a water hose when it whipped around after being blown with air from a compressor.,1
"On 1/14/2015 at approximately 11:23a.m. an employee was using a blow down system on a National 340 pump to blow out water in the hard line. Once the 4 inch suction hose was drained, the suction hose was disconnected and a cam lock was placed on the suction hose coming from the pump. The four inch butterfly valve for the suction was left open allowing air to pressure up against the cam lock cap. The employee used this system to build air and blow down the fluid in the tubing line to the tank. The employee was standing in front of the manifold and slightly to the right approximately one foot away. When the employee opened up the manifold, the cam lock cap popped free hitting him in the shin.",1
Employee amputated finger on a buffing wheel.,0
An employee's foot was struck by an excavating machine.  The employee was admitted to the hospital and stayed overnight for surgery.,1
An employee cleaning up roofing material fell 7 feet off the edge of a roof.,1
An employee was operating a reach forklift when he struck a pallet that forced him against a compartment of the forklift when it came to an abrupt stop.  The employee sustained injuries to the hip area that required an admission to the hospital.  ,1
"An employee was unjamming a stuck granulated salt spreader used on the back of a truck to salt roads.  The employee reached into the impeller and chain components while the machine was running and something grabbed his right hand and amputated his right index finger past the nail bed, but before the first joint.",1
"The employee went to step up on a platform that leads away from and around the work area.  The employee tripped on the platform step (9 inches off of the floor) and landed on his right knee, breaking his femur.",1
An employee tripped on a shelving unit and broke her pelvis.,1
"An employee was pinched between an aerial lift and walkway. While attempting to come down, the lift acted abnormally. It instead went up and pinched the employee between the lift and walkway.",1
"An employee in PIV training was operating a stand-up forklift. He backed into a metal rack, causing himself to be pinned between the PIV and the metal rack.",1
An employee amputated a fingertip while working on equipment in the workplace.,0
"An employee lost control of an electric pallet jack when unloading products from a trailer.  The pallet jack hit the dock plate and the handle struck the employee in the stomach, pinning him against the wall of the trailer.",1
"On 1/14/15, an employee on his mail route accidentally swallowed a pen cap. The pen cap traveled to the employee's lung. The employee was hospitalized.",1
An employee sustained injuries to his ring and index finger while cutting a piece of wood on a table saw.  At the time of the injury on 1/14/15 it was believed that the employee had sustained lacerations to the fingers.  It was later found out on 2/4/15 that the injury to the index finger  resulted in an amputation while the employee was under medical treatment.,0
An employee was trying to pull down a guard on a miter saw when he had his left thumb amputated.,1
"Worker operating a small press brake was struck in the neck by the piece that was being bent. The worker passed out, fell over a stool/chair, and struck his head on the concrete floor. He was transported to the local hospital in Parsons where he was treated, and then transported to Via Christi in Wichita where he remains hospitalized.",1
Employee suffered a critical head injury when he fell off an extension ladder while welding at a steel building construction site.,1
Employee was connecting the jiff to a trailer. Employee smashed his thumb between the jiff and the trailer connector.,1
"At approximately 4:30 PM on January 14, 2015, an employee was lighting a gas grill to prepare lunch for employees during a work gathering.  The grill flashed, resulting in minor burns to the employee's arm and face.  The employee went to an urgent care facility, and then a hospital, where he was admitted at approximately 9:30 PM, and kept overnight.",1
A piece of wood was jammed in the splitter. The employee tried to unjam it by crawling up onto the machine before the saw had stopped. Somehow his thigh came into contact with the saw. The saw was idling down after being turned off.,1
An employee fell 16 feet from a conical cover on a tank.,1
"An employee, in the process of dismantling a scaffold, climbed the scaffold ladder to approximately 25 feet and stepped off onto a pipe header.  Once on the pipe header, the employee slipped off and fell 25 feet to the ground below where he suffered a right arm compound fracture, a right elbow dislocation, and a fractured pelvis.  A yo-yo tie off was available that the employee was not using. The incident occurred at the 100 rack at the enterprise construction site.",1
"On January 14, 2015, an employee was pinned between a 4,000 lb motor and the wall of an elevator, when the motor and cart slid from the forks of the truck. The employee suffered a fracture to the right femur.",1
Employee slipped while sweeping and injured back and right leg.,1
An employee was injured when he fell on ice and broke his leg.,1
Employee backed up against a Salamander (heating unit) to get warm and caught the back of his right pant leg on fire. Employee suffered burns to the back of his upper right leg.,1
The employee was walking on the property when he tripped over a concrete parking stop and injured his right knee.,1
An employee was engaging in pipe fitting using a portable grinder and received an amputation to his finger padding.,0
Employee was working on the high-speed packing line when a belt came off of the pulley. He suffered an amputation of the tip of his left index finger while trying to re-mount the conveyor belt while it was in motion.,0
An employee was hospitalized after sustaining an injury to his right ring finger in the coil bay.  The employee caught his right ring finger between a C-hook and a coil while operating an overhead crane remotely.,1
"An employee was delivering a package to a residence.  When the employee walked up the driveway, she encountered a slick spot due to ice.  The employee fell and broke her left leg in two places.",1
"The employee was checking the ink level on a print department machine without shutting it down.  As the employee reached in to check the ink tray, the employee's shirt was pulled into a roller or shaft.  The employee's left arm and shoulder were subsequently pulled into the machine.  The employee was able to pull the arm free, but suffered lacerations to the left arm and injured the shoulder.  The employee was transported to Freemont Medical Center and then transferred to a hospital in Omaha.",1
Employee was burned while unloading asphalt from a transportation vessel. The employee was in the process of cleaning the transfer lines from the vessel when he was burned on his face and arms. ,1
"On or about January 20, 2015, an employee was injured when a large metal plate fell on the right foot.  Toes on the foot were subsequently amputated as a result of the injuries.",0
"Frac technicians conducting monitoring operations on water levels of gauging tanks during oil and gas drilling operations are potentially overexposed to air contaminants and respiratory irritants such as chlorine, hydrogen sulfide, and benzene.  Recently, an employee was admitted to the hospital for observation and treatment after suffering from an extreme coughing episode after working a monitoring shift at the worksite.  A second employee was treated and released.",1
Employee suffered an amputation of his right index finger while putting a bird's leg back into a shackle in the picking room. Employee's finger got caught in the moving shackle.,0
Employee removed machine guards to check the bearings. The machine engaged and his finger was pinched between the ball gear and bearings. The finger was amputated below the finger nail first knuckle.,0
"While walking into the dining manager's office from the stove area, an employee slipped on the threshold of the office door and landed on his left elbow and onto his back. Preliminary diagnosis was concussion without loss of consciousness, acute headache, cervical sprain, thoracic spine sprain, and lumbar spine sprain.",1
An employee fell from the platform of a 3-step ladder when taking products down from the shelf.,1
"Employee was rebilling pipe. While placing a spacer board between the pipe and pipe pusher, his finger got caught between the two, skinning the tip of his finger.",0
"On January 15, 2015, at approximately 2:45 a.m., Employee #1 experienced a laceration to the right little finger while operating equipment used to remove the breast and tenders from the bird. The employee was taken to the hospital, where it was determined that a surgical amputation was necessary.",0
"Following flashlight failure during a pre-op inspection, employee was pointing to sanitation and contacted the belt with the right index finger, avulsing the fingertip and fracturing the bone. Employee was transported to the hospital where the fingertip and bone were amputated.",1
"An employee's finger tip on the right hand was deeply cut when his finger slipped under the conveyer belt while adjusting the tension chain.  

At the McAllen Medical Hospital the doctor amputated the fingertip.",1
"An employee was presetting a roller channel machine.  While presetting the chuck, a jam occurred.  The employee tried to clear the jam.  The pusher activated and pinched the tip of the employee's right index finger.  The employee went to the emergency room, which documented the injury as an amputation.",0
An employee stuck his leg out of a golf cart while operating it and when he lost control of the buggy due to contact with water or slush on the shop floor his leg struck a pole causing a fracture that required hospitalization and surgery.,1
An employee was walking on a catwalk when he tripped on an object that protruded from the floor of the walkway and broke his left femur.,1
Employee fell from the roof while descending a ladder and was hospitalized.,1
"On January 15, 2015, the employee was caught between equipment and suffered serious injuries while operating a saw machine located at 2130 Third Avenue NW in West Fargo, North Dakota.",1
Maintenance employee suffered a hip injury from a fall to a lower level when he fell off a ladder.,1
Employee fell off of a flatbed tractor trailer bed while strapping down a palletized load.  Employee suffered a leg injury and was taken to a local hospital and admitted.,1
"Employee was making a delivery and parked the tractor trailer behind Walgreens at 9th & Shipley.  The tractor trailer caught a low hanging wire from overhead poles on the front driver's side corner of the trailer.  The driver attempted to remove the wire from the trailer catwalk and then attempted to remove the corner cap from the trailer.  The cap came loose suddenly, hit the associate in the face, and he fell flat on the roof of the trailer.  He sustained facial and eye injuries, along with spinal injuries, and was admitted to the hospital for treatment.",1
"While cutting a board at a 45-degree angle, the cut piece jammed and flew back at the employee, hitting the employee's fingers.",1
"Employee was bleeding the pressure off a weighted ball used to check stormwater pipes for leaks. The weight of the water inside the PVC pipe caused the ball to slide down the pipe. Employee grabbed the rope strap with his right hand and the strap's force and sharp edge severed his right-thumb tip. 

The finger tip was recovered and delivered to Parkland Hospital, but didn't have enough bone to be reattached.",1
An employee using a 10-foot A-frame ladder was knocked over when another employee opened a manual overhead door they were working on. The employee fell off the ladder and sustained multiple bone fractures on both forearms and wrists.,1
Employee burned by flash fire at pumping station while adjusting compressor.,1
"On 1/15/2015, employee injured two fingers on his right hand after catching it under a bundle of rebar while operating a side-loader in the yard. Part of the bone of his right ring finger was surgically removed on 1/20/15.",0
"Employee was walking from the parking lot to the front entrance of the facility via the sidewalk near the building. About 15 yards from the door, there was a patch of ice on the sidewalk due to drainage (melting/refreezing) from the building. The employee slipped on this ice and fell.  The employee suffered a left hip injury.",1
Employee received 2nd and 3rd degree burns from hot liquid plastic while removing a plug.,1
"On or about January 15, 2015 an employee was injured while working on a CNC lathe which resulted in the employee being hospitalized for over five days from the injuries sustained from the accident.",1
"Employee was assisting a person who was under the influence into the hospital when the person/patient fell onto the employee, knocking him down and causing him to sustain a fracture to the right ankle.  Employee was hospitalized.",1
"The employee was operating a Whirlwind pop up saw, cutting 2X2 lumber into 36-inch lengths.  The employee accidentally activated the foot pedal that controls the saw.  When the pedal was depressed, the ""guard"" and 8-inch saw blade came up, amputating the employee's right index, middle, and ring fingers. The employee was brought to the hospital where two of the three fingers were re-attached.  

The incident occurred in the pop-up saw area.",0
"On 1-15-15 at 11:30AM an employee walking down stairway 2 from the third to the second floor fell. The worker has a fractured thoracic spine, a fractured middle finger, a bump on the head, and is having tests on her hip and thigh.",1
"An employee was installing a light fixture. He was shocked and fell from the 8-foot, A-frame ladder he was using, with his feet about 4 feet off the ground. When he was shocked, the ladder and he fell in opposite directions. He has some tingling in his right arm and restrictions for both arms until further evaluation.",1
"Employee was part of a two-man team moving furniture from a customer's location. Employees were moving a large sleep sofa to the ground level when the sofa came into contact with a metal stair rail. The injured employee's finger was between the two objects at one point, and when they came together, they severed the employee's finger below the first joint.",0
"On or about January 16, 2015, at approximately 2:30 p.m., an employee had an allergic reaction to latex resulting in hospitalization.",1
An employee working in Department 429 suffered a skull fracture while loading an 88-pound disc on the west side of a 55-ton mechanical press.,1
An employee suffered serious injuries after being caught in a machine that was in motion. Surgery was required.,1
Employee received an electric shock when he placed his wrench near an energized bolt on a conductor he was removing.,1
"Employee was lowering a boom lift while installing fire protection piping. The hydraulics failed, causing the employee to break the lower left leg.",1
Employee sustained a fall from a material platform (catwalk) after fixing a jam on the material line.,1
An employee was run over by a forklift and suffered an amputation of his lower left leg.,1
"Employee was tightening a strap used to tie down equipment on his truck when the pry bar came out of the hole and hit him in the mouth, fracturing the maxilla bone.",1
"An employee was hospitalized after a pump seal failed during the repair of a pump. Pennzoil 50H and X850 oil blew into the employee's eyes, throat, and nose, resulting in inflammation and irritation.",1
"A Disney worker was going down the stairs at the end of her shift.  She fell down 6 or 7 steps and fractured her left arm, which required surgery.",1
An employee was using a handheld torch to cut a hole into steel pipe when the torch hose blew. The employee suffered burns on his hand and was admitted to Lady of Lords Burn Center overnight for treatment.,1
Forklift Incident.,1
Employee was struck by a PVC pipe while installing an underground television cable.,1
"An employee was working from a 12-foot step ladder that was folded and placed on top of an air handler. The top of the ladder was leaning against a wall. As the employee stood on the ladder finishing a wall inside a mechanical room, the ladder slid away from the wall and the employee fell to the ground. The employee suffered a left broken leg above the ankle and a broken right little finger.  The employee was admitted to University Medical Center in Jackson, Mississippi.",1
"Worker was in a trench and was injured when an operator moved the trench box. The spreader bar on the trench box struck the worker in the back, cracking his vertebra. The worker was hospitalized one night.",1
"Employee was on top of a hot oil tanker trailer attempting to remove the lid to fill the tanker. The lid was stuck due to sitting for a couple of weeks because of inclement weather.  The fall protection cage provided at the fill location did not fit the tanker trailer properly, leaving a gap large enough for the employee to fall beneath the cage. When the lid came loose, the employee fell from the top of the tanker trailer, under the fall protection cage, to the ground. The employee dislocated a shoulder, broke two to three ribs, and received contusions.",1
An employee damaged tendons in two fingers and was admitted to the hospital.,1
Employee fell from ladder when coming down the roof and broke his hands and neck. ,1
Two employees were installing a murphy bed when the lifting mechanism snapped.  One employee suffered a severe laceration to a thumb and was hospitalized for two days to reattach the finger.,1
Employee was performing a garage audit. The garage door wasn't closing properly due to a chain malfunction. Employee's finger was caught in the door bin.,0
Employee amputated the fourth finger on his left hand when it was caught between a rotating belt and pulley. He was attempting to tighten a bolt on the motor of a cooling unit. The rotating belt and pulley was located in the center of the roof of the cooling unit.,0
"Employee was using a Stihl chainsaw to flush cut a tree stump when it kicked back and cut his leg, requiring hospitalization and surgery.",1
"The worker was taking photos of the project from the roof, when he stepped back and fell through a sky light. He fell 22 feet to the concrete floor below.",1
An employee fell approximately 26 feet while working on a scissor lift.,1
An employee was assisting the truck driver to clear small amounts of cement left in the vehicle when the rear  chute came down on the employee's left middle finger amputating the tip.  The employee was taken to hospital and the fingertip was reattached.,1
"Employee was moving a wall while using a crane. One end of the wall fell and broke the employee's arm.  Surgery was performed, and the employee was hospitalized post-surgery.",1
The rope broke while a new cross arm was being installed on an electrical power pole. An employee walking under the rope was struck by the falling arm.,1
"At approximately 9:00 p.m. on 1/16/15, an employee leaving work outside the building stepped down from the curb and broke her leg in two places. The employee was taken to the hospital where she had emergency surgery. The employee was released two days later on 1/18/15.",1
Employee dislocated a knee during a weapons training exercise.,1
An employee was admitted to the hospital after being injured as the result of a fall.,1
"On or about January 17, 2015 an employee suffered an amputation injury while unjamming a part stuck in a CNC machine.",0
"On or about 1/17/2015, an employee was struck by a forklift, resulting in fractures to both legs. The employee was subsequently hospitalized for these injuries.",1
Employee was struck by a moving vehicle while assisting a customer in the Publix Supermarket.,1
"On January 17, 2015, an employee was exposed to a sharp hazard when a meat thermometer was caught in mid-air and went into the employee's hand.  Employee had to have inpatient ligament  surgery on January 19, 2015, due to the injury.",1
An employee fell off the tailgate of a box truck while closing the back door. The employee injured his back and ribs and was hospitalized.,1
"At approximately 8:05 p.m., an employee suffered a possible amputation. The employee was sweeping mail at bin #1 and her finger was caught in the belt. The finger was then dragged between the belt and roller, resulting in a 2-cm avulsion to her middle finger on her right hand.",0
Employee fell from a ladder while descending. The employee broke arm/wrist.,1
An employee was involved in a forklift accident that resulted in hospitalization.,1
"A mechanic suffered a thumb amputation while performing maintenance on the packing station conveyor line #7.  The employee removed the guard to see what was making a noise, lost his balance, and fell into a chain and sprocket.",1
"Employee fell in parking lot on the way to her car after working her shift.  She fell on ice and hit her head, resulting in transport and admission to the hospital.",1
Employee was taking out a 10-inch hose to get water ready for the frac operation when he was struck by the hose on his ankle.  The employee flipped and fell on his head.  He bled from the left ear and suffered a closed fracture behind his left ear and internal bleeding on the brain.,1
"The employee had finished making a drop off at the Waste Management Landfill, when he observed his back gate was open. He got out of the truck, and went to the back of the vehicle to close the gate mechanism. The truck began to roll backwards, and the employee ran to get back into the vehicle. The employee fell, landing in the path of the vehicle. The vehicle ran over the employee, causing multiple fractures on his right side and a cut to his calf.",1
Employee was attacked and beaten by three to four assailants and was hospitalized. ,1
"Employee was walking in the parking lot, tripped over a parking block and fell.  The fall resulted in a laceration to the employees face which required hospitalization.",1
An employee was exposed to a fuel spill at gas pumps #1 and #2. Employee got sick and has been throwing up blood. The employee is hospitalized at Southwest General Hospital for treatment.,1
"Employee was injured while performing a ""cold cut"" on a 6"" metal pipe of a gathering system. Employee was burned on the face, both arms, and knees. Employee was using a striker from the welding equipment and possibly ignited natural gas.",1
"At the Hat Creek Production Pad, an employee slipped when climbing down a fixed ladder of a heater treater. The employee fell from an approximate height of 6' onto the ground. The employee was hospitalized for a period of 2 days at Southwest General Hospital.",1
"Employee was working on a load former unit.  Employee hit the cycle button to retract the stripper plate while placing his hand on the cover plate.  The stripper plate returned to the extended position and employees middle finger was caught by the machine, removing the tip of the finger and part of the finger nail.",0
Employee working at a cash register tripped over the scanner cord.,1
"While moving dye, employee pinched the right ring finger between the clevis and hook. The employee was taken to the hospital where the tip of the finger was amputated.",0
"An employee working in the dish room slipped and fell, breaking a wrist. The employee was hospitalized and surgery was performed.",1
"Employee was offloading customer hoses at facility and attempted to remove the cap off of a hose. The hose still maintained some pressure, and when the employee removed the cap, Styrene splashed onto the employee's face and midsection. The employee was sent to the hospital and was admitted overnight.",1
"Employee slipped on ice resulting in a broken nose and a back injury. Employee has been hospitalized since January 18, 2015.",1
Employee was walking through the parking lot on a designated walk area while leaving work. The injured employee slipped on black ice and injured her right leg.,1
"Employee was working from a ladder with a tool, repairing a conveyor belt system. Weight shifted and the employee tried to regain balance by stepping to the second step. Employee lost footing and fell to the ground, fracturing his femur.",1
An employee was exposed to hot condensate while transiting through the basement of the bleach plant. The condensate burned his lower legs.,1
"While manufacturing a shaft pin on a metal lathe, an employee in the Bldg. #304 Machine Shop was sanding the rotating pin with an emery cloth.  The cloth bound and pulled the employee into the rotating lathe machine, resulting in a left broken hand and lacerations on the right hand that required surgery and in-patient hospitalization.",1
An employee was shot in store during working hours.,1
The employee reached around with her right hand to clean the front of the meat slicer and did not realize the slicer was on.  The tip of the employee's right index finger just below the fingernail was amputated. There was no bone loss.,0
Employee was walking on the sidewalk when she fell and hit her head resulting in a concussion. ,1
Employee was operating an injection molding machine. The employee was hospitalized due to burns on hand from injection mold.,1
"On or about January 18, 2015 at noon, an employee was working on a baler rotary valve.  The employee slipped and fell approximately 48"" hitting the mid-section.",1
The HVAC team was removing an air-conditioning system from a roof when an employee stumbled over and fell onto angle irons that were supporting the system. The employee was hospitalized and had two surgeries on his right thigh.,1
Catwalk collapsed while employee was on it.  Employee landed on feet and fractured both ankles. Employee was hospitalized.,1
"On or about January 19, 2015, an employee received a partial finger amputation while using the shrink wrap machine.",1
"An employee was polishing a main drive shaft on the South Bend lathe.  He was wearing gloves and an apron, and his glove got caught in the lathe. It started to wrap him up and pull him in, breaking his left arm.  He pulled himself free from the machine.",1
"A sales consultant was at the home of a client. While putting her case into her car, she fell backwards over samples that she had placed on the ground.  She was hospitalized with a broken hip and elbow.",1
A home health aid slipped on ice on a driveway at a client's home which resulted in a ligament sprain in both knees and a patellar tracking disorder of the right knee requiring hospitalization.,1
An employee was sandblasting miscellaneous steel when he lost his balance and shot blasted his bicep and chest area.  He was transported to the hospital. The extent of his injuries are not known at this time.,1
Employee working in the stock room at floor level lost balance while trying to catch a tub that was falling from a table. Employee fell to the ground and fractured a hip.,1
An employee fell from a scissor lift loading platform.,1
The employee suffered a fracture to her foot when the edge of a steel plate dropped and landed on her foot. ,1
"On January 19, 2015, at approximately 9:50 PM, an employee slipped while stepping from the parking lot to the sidewalk.  The employee struck her knee, resulting in the need for surgery and hospitalization.",1
Employee's right pinky finger distal tip was amputated when pinched in an automobile door. The employee was helping to push start a customer's car related to a battery change when the customer closed the car door on the employee's hand.,0
Employee making a delivery struck a tree limb with his truck when entering the facility.  The tree limb fell and remained on top of the trailer.  The employee pulled the downed limb off the top of the truck and the limb landed on him breaking his leg.,1
Employee was using a shear when his right middle finger went beyond the point of operation.  Injury is an amputation to the right middle finger above the first digit.,0
"On January 19, 2015, an employee received a partial amputation of his left index finger when it got caught between two tubes while he was manually assembling a grip.",0
"Employees were using a backhoe to remove a section of railroad rail when the rail broke loose and swung, striking an employee in the leg.  The employee received fractures to the femur and ankle.  It was estimated that the rail was 18 feet long and the employee was 15 to 16 feet from the backhoe.",1
An employee was injured by falling more than 7 feet from the first level of a creel while moving a yarn dolly. The injury resulted in an overnight hospital stay.,1
"On or about January 19, 2015, an employee was operating a walk-behind lift truck and pinched his finger between the barrel lifting attachment and a stationary part.",1
"An employee was helping another employee line up two heating plates that weighed approximately 2,000 pounds. The second employee signaled the forklift operator to set the plate down. When the forklift operator lowered the plate too quickly, the injured employee could not get his left thumb out of the way, causing the tip of his thumb to be amputated between the plates.",0
An employee suffered a back injury when a hopper that was being lifted by a forklift fell on the employee.,1
"An employee delivering fuel unhooked the metal cable across the driveway to enter the facility.  When he was going back to the truck, he got caught up in the cable, tripped, and fell.  He was hospitalized with a fractured hip.",1
"An employee was on a ladder installing a new line.  When he cut the old line, which was tight, the line whipped back and knocked the employee off the ladder.",1
"On 1/19/15, an employee was placing items in the freezer when the employee began to see spots in the left eye and then lost vision in that eye.  Employee was hospitalized overnight.",1
"On 1/19/15, employee was burned on the upper right and left legs and buttocks as a result of employee horse play. The employee was hospitalized in Mercy Burn Unit for a week.",1
"An employee was feeding the sander on the Hessman Sanding Machine. A panel of plywood (18""x96""x3/4"") fell from the buggy and struck him on the head, neck, and shoulders.",1
"Employee was descending a ladder when he slipped striking his jaw and face resulting in a broken jaw, nose, and facial bones and a broken right thumb.",1
"An employee was checking the lights on the trailer or truck, which had just been repaired.  He climbed up onto the trailer to check the lights and slipped due to the morning dew on the trailer.  He landed the wrong way and broke his left tibia.",1
Employee amputated tip of finger when he caught it in a clamp while running rods.,1
"An employee sustained an amputation injury to the tip of the middle finger on his left hand while clearing a jam on a Global Partition Slotter, which makes slots in corrugated cardboard. The employee reached into an area 3x4"" wide, 2' long while the equipment was running. The equipment was not guarded at the time, nor was it shut down or locked out.",0
An employee was injured when an excavator rolled over while moving material.,1
An employee suffered a severe burn injury while working on a power pole when he made contact with a live wire. The employee was sent to Utah Burn Center.,1
"On January 20, 2015, the tip of an employee's left thumb was amputated while performing work on the Raimann #2 machine, which uses dies to remove knots from 4x4 sheets of plywood.",0
"Employee was installing steam trace lines from an aerial lift. The individual then bent over while working; the aerial lift moved, catching the employee's head between the cage of the aerial lift and an iron beam of the support structure for the unit.",1
"On or about January 20, 2015, at approximately 3:10 PM, an employee suffered an amputation of the left-hand ring finger, just above the first knuckle. The employee was attempting to stop heavy gauge from falling off the top of a cart.",0
"Employee strained his back while working at the restaurant and was unable to stand up straight, requiring the employee to go to the hospital.",1
"An employee was walking in a hallway in the Skills & Development Center, Building 1260, when she fell and fractured her hip.",1
An employee fell and struck her knee on the parking lot pavement.  The trauma required transport and inpatient hospitalization.,1
An employee dismounted a forklift into a puddle of water and slipped. The employee suffered a groin tear/sprain.,1
An employee was getting out of a Ford F-150 when the truck started rolling back and the front tire rolled over the employee's left leg.,1
"Around 11 p.m. on January 20, 2015, an employee was attempting to load a trailer of frozen products. He went to roll up the dock door and the spring came loose, causing the door to come down on his left leg. He suffered a fracture to his left fibula and tibia and was sent to Memorial Hospital of York. At 8:30 a.m. he was evaluated for inpatient rehabilitation.",1
A worker was fabricating a spool from steel. A portion of the steel fell onto the worker's hand and sliced through the tip of his pinky.,0
Employee was working on the HVAC unit and amputated his left index finger when it was caught on the HVAC's unit belt.,0
Employee cut his finger while he was cleaning the meat slicer in the deli.,0
"On 01/20/2015 at approximately 8:00 am, an accident occurred while the employee was operating a table saw ripping 1/8"" hardboard. The employee was ripping 28"" wide sheets of 1/8"" hardboard 9' long by 23"" wide using a table saw. His hand inadvertently slid under the front of the guard and caught the blade resulting in the loss of the right index finger between the first and second knuckle and broken bones and extensive lacerations on his middle finger, thumb and palm. He was taken to Milford Memorial Hospital then later transferred to Christiana Hospital for an overnight stay.",1
Sheet rock was being transported with a dolly. The dolly tipped over and injured an employee's femur.,1
"Employees were moving a 53-foot trailer with a forklift.  The trailer shifted and began to fall towards a parked truck. One of the two employees ran between the trailer and truck to stop it from hitting the truck. Employee sustained a broken left arm, requiring surgery and hospitalization.",1
"An employee servicing an AC was working from a 10-foot A-frame ladder. While descending, the ladder gave way and the employee fell to the ground.",1
"On 1/20/2015, at about 6:30 p.m., an employee helped a second employee at the Townsend Skinner machine, which separates pig fat from pig skin. The employee reached into the conveyor belt, which has serrated teeth, and his right little finger was caught. He was transported to BSA Hospital in Amarillo, Texas, and his right little finger was amputated.",0
"Employee fell from a utility lift in Bay 3, Hanger 710, and struck his head on the concrete floor, causing a skull fracture and serious brain injury.",1
"An employee was helping the truck driver load equipment onto a flatbed truck. They were covering the equipment with a tarp. The tarp began to slip, causing the employee to lose balance and fall onto the concrete platform 4 feet below the flatbed surface. The employee was taken to Willis Knighton North Medical Center and admitted. The employee suffered a compression fracture to the L-1 Vertebrae.",1
An employee fell while walking in a hallway and suffered broken leg bones. Employee has been hospitalized.,1
An employee was operating a table saw when he amputated his right thumb.,0
"An employee was using a hoist to lift a 300-pound part from a roller conveyor.  The part swung as it was being lifted, striking the employee in the right leg, just above the knee.  The employee suffered a fractured leg, requiring surgery and an overnight hospitalization.",1
"An employee operating a water blaster tripped and fell. When the employee picked the water blaster back up, his hands were cut by the water pressure. The employee was taken to the hospital and was hospitalized. The cut had to be kept open because of possible debris intrusion in the open wound.",1
Employee was standing on an externally mounted receptacle located on the wall. The receptacle broke away causing the employee to fall to the ground fracturing his leg. He required a surgical procedure and in patient hospitalization to repair the fracture.,1
"On January 21, 2015, a tag line became entangled around an A-frame metal beam weighing approximately 1400 lb., causing the beam to fall against the leg(s) of a worker. The worker suffered fractures of the right lower leg and was hospitalized.",1
An employee was hospitalized with broken ribs while pulling de-energized conductor wiring.,1
"Employee was using a Bobcat with a jack hammer attachment to flip a metal caster lid (that weighs approximately 300 pounds). When the employee flipped the lid, the edge of the metal casting lid hit his leg, injuring him while he was in the Bobcat.",1
An employee amputated part of the right pinky finger while operating the laminating machine in the appetizers department of the production facility.,0
"Employee was repairing an overhead door when a spring broke releasing the door and striking the employee injuring the shoulder, clavical,  and ribs.  Employee was hospitalized.",1
An employee was feeding film into the casting machine when his arm was caught between the rollers and broken.,1
The worker was using a chop box and amputated his left thumb.,1
"An employee suffered a leg injury after being struck by a piece of wood. 

An excavator dropped a utility pole which subsequently caused a piece of wood to hit an adjacent worker.",1
"Employee was working on the carburetor of his company vehicle with gasoline on his hands when it ignited, causing 2nd and 3rd degree burns on his right hand and 2nd degree burns on his stomach and left hand. Employee was treated and hospitalized at Doctor's Hospital in Augusta, Georgia.",1
"Employee was walking beside his truck trailer on two inches of snow that was on top of ice. The employee slipped and fell onto his right side. He suffered a broken right fibula. He was taken to the hospital, admitted, and had surgery.",1
"Employee was loading a commercial chain link fence approximately 45' X 6', 400 to 500 pounds, onto a flatbed of a Dodge 350 truck. The employee fell from the edge of the flatbed to the ground on his lower back and hit his head. The employee hurt his back and fractured his skull but remained conscious.",1
"On or about 1/21/2015 at 9:00am, a worker on a stick machine located on the gin at Johnson's Gin Co. in Silverstone, Texas, fell from a 5ft ladder and landed on top of the stick machine catching his hand on the equipment and breaking both bones in his forearm resulting in hospitalization.",1
An employee walking out the door of a customer location tripped and fell breaking and dislocating the hip. ,1
Employee fell from an A-frame ladder and fractured his left wrist and elbow.,1
An employee fell on a concrete floor and sustained a concussion and cuts and contusions to his head.,1
"Employee was injured while demolishing a walkway on a barge.  Employee was working on the second level of the barge when the board on which he was standing broke. He fell through the board, hitting his abdomen on a metal I-Beam as he was falling.",1
At 9:00AM an employee was working on an oil field energy services tanker removing a camlock cap.  Pressure was on the cap when it was removed. It blew off and struck the employee in the face injuring his jaw and damaging his teeth.  The employee was transferred to different hospitals before receiving treatment. The employee was hospitalized one night in Bismarck.,1
"An employee was operating a manual entry rack that feeds a lathe.  The employee pinched the pointer finger on the left hand between the axle and end stop on the entry rack.  The employee suffered amputation of the left-hand, pointer fingertip.",0
Employee experienced breathing problems while working around a cleaning product. ,1
An employee was involved in an accident that resulted in the partial amputation of the left pinky finger.,0
"On January 21, 2015, at approximately 9:34 AM, an employee in the meat department suffered a partial amputation of a finger with a small amount of bone loss.",0
"An employee experienced a sharp pain under the left-side rib cage while lifting a box. The employee reported the incident on 1/21/2015, but on 1/23/2015, he was hospitalized.",1
"Employee leaned against break room space heater. His clothing caught fire and while attempting to disrobe, he burned his hands and back. Employee was hospitalized overnight.",1
"Employee slipped on ice and fell in the parking lot, resulting in a fractured hip that required surgery.",1
Employee coming in to work stepped out of her vehicle and slipped on ice. She broke her left ankle.,1
"On 1/21/15 at about 16:20 pm a worker was hit by the tongs on his right arm, chest, and leg.  He was transported to OU Medical Center where his right hand was amputated.  Immediately before the accident the drilling line was stuck.  The snub line connected to the tongs snapped causing the tongs to swing around and hit the worker.",1
An employee was clearing a plugged ammonia transmitter when the vat line on the transmitter blew. The employee was sprayed with ammonia and suffered 2nd degree burns on approximately 5% of the body. The employee was admitted to Baton Rouge General Burn Unit for treatment.,1
"Employee was unloading boxes from a delivery truck when some boxes fell. She stepped out of the way, tripped, and hit her head on the conveyor belt used to unload the truck. She sustained a concussion and was hospitalized.",1
"On 1/21/15, at approximately 5:00 a.m., an employee was performing a torching operation when a piece of hot material entered his left safety shoe, causing a burn on the top of the left foot. Employee informed supervisor and supervisor performed first aid by applying burn ointment on burn and wrapping foot. The employee completed his shift. The employee returned to worked and completed his shifts on 1/22 and 1/23 and was not at work on 1/25. The employee came to the supervisor's office on 1/26/15 with a severely infected foot and was told to go to the occupational clinic. The employee went to the occupational clinic on 1/27. The clinic sent the employee to the emergency room and the emergency room doctor admitted the employee.",1
"While rethreading a wire former, employee suffered a severe left hand injury to all four fingers, resulting in employee hospitalization.",1
Employee performing maintenance on a conveyor fell down an open chute about 10 feet and was hospitalized.,1
Employee experienced an amputation of three fingertips while attempting to unjam a board from a notch saw.,0
"An employee was injured in a fall on January 22, 2015, at approximately 10:30 PM.  The employee is currently at Miami Valley Hospital in Dayton, OH.",1
"On 1/22/15, at about 9:20 a.m., an employee was standing by a flat bed trailer while a Roll Off Of America forklift driver backed up. The forklift driver ran over the employee's left lower leg.  The employee was transported by ambulance to Texoma Medical Center in Texas and admitted as an in-patient.",1
"On or about January 22, 2015, an employee received a hand injury that required hospitalization. The incident occurred as the employee was testing a new Phlauer Mixer on site; the employee's hand got caught in the mixer.",1
Employee was installing a slide on a lathe when the slide sliced the tip of his left middle finger off.,0
"On January 22, 2015, at about 8:30 pm, a casing trough was being loaded by a forklift to a truck.  The trough slid off the forks and struck the employee at the midsection of his stomach.  He was pinned between the trough and a pipe rack.  The employee was admitted to OU Medical Center in Oklahoma City around midnight on 1/22/15.",1
"While in the process of moving a floor grating, an employee suffered an amputation of the tip of the left middle finger.",1
An employee suffered a severe struck-by injury from a bull plug and gauge while repairing the bull plug.,1
Employee received multiple burns to the body due to a clamp on a hot water line failing.,1
"After exiting her car, an employee slipped on the ice in the employer's parking lot while walking to the hospital and broke her arm.  She was hospitalized.",1
Employee was loading a vehicle when the employee possibly fell or slipped causing head and back injuries.,1
"Employee was at a company site attempting to gain access to the roof ladder via a fixed ladder .  The height of the platform from the ground was 10 ft, 7 in. The employee slipped and fell to the interior concrete floor. The employee broke his wrist, and bone was exposed.",1
"On January 22, 2015, an employee operating a rough terrain forklift on frozen ground felt a ""pop"" in his back. The employee reported the incident to management the following day, went to an emergency room on two occasions, visited a doctor, and had an MRI before being diagnosed with a spinal epidural hematoma and admitted into Geisinger Medical Center in Danville, Pennsylvania, on January 28, 2015.",1
"Worker was hit in the head with rebar that fell from an upper elevation on a construction site. The worker was taken to the hospital, where a CT scan indicated a skull fracture.",1
"Employee was working on assembling a trailer when the pneumatic fastening gun she was using got caught on the frame.  The frame fell on the employee, which resulted in a broken leg.",1
An employee was hospitalized after stepping into molten aluminum. Employee was burned several inches up his boot by the molten aluminum.,1
"Employee backed up his fleet vehicle to park it, then stopped the vehicle and stepped out to load his gear into his personal vehicle.  As he walked away from the flatbed, he slipped on black ice and fell, fracturing his right tibia.   He was admitted to Southern New Hampshire Hospital and had surgery at 11:00 am on 1/23/14 to repair the fractured bone.",1
"On 1/22/15, a bike messenger hit a truck at approximately 9:30 a.m. on the corner of Peoria and Madison in Chicago, Illinois. The employee was taken to the hospital. The employee suffered injuries to the face, spleen, and pelvis. The employee had surgery and was released from the hospital on 1/25/15.",1
An employee was performing maintenance on the line when he placed his left hand into the moving and high-temperature components of the dehydrator drum. He broke several bones in his hand and the skin was de-gloved. He suffered burns.,1
Employee was using a 10 lb. sledge hammer to tighten a hammer union.  The employee missed and caught his right index finger between the handle of the hammer and a valve handle.,0
"While clearing the line #2 plastic dicer machine, an employee suffered an amputation of the middle and ring fingertips of the right hand.",0
Employee hospitalized due to second degree burns from contact with hot product/stock.,1
"The employee was in a snubbing basket. Upon exiting, the employee slid down the emergency fire pole, lost his grip, and fell.",1
An employee was walking to his work location when he slipped on ice and fell injuring his back.,1
"The employee was making adjustments to a fence staple manufacturing machine. The employee was working on the machine when the flywheel came down, catching his hand between the flywheel cutter and stationary cutter. The employee's left thumb was amputated and the employee was hospitalized.",1
"On January 22, 2015, an employee was hospitalized after falling 12 feet to the ground through a 2' x 3' opening in a centrifuge stand.",1
"Employee helping machine operator attempted to adjust a hydraulic press. The press cycled and pinched the employee's finger between the die and the machine, later resulting in the amputation of the right index finger up to the first knuckle at the hospital.",1
Worker hospitalized when an infection developed from a razor tool cut.,1
"An employee slipped on ice on the sidewalk of a client's property, fell, and sustained a broken ankle.",1
"Two employees were running the laminator machine. The injured employee was working on the front while another employee was working on the back of the machine. The laminator glues aluminum foil to the paper to create sandwich wraps and bags. The paper developed some wrinkles and the injured employee reached over the guard to try to fix the paper. When the employee reached over the guard, he caught his finger in a nip point where two rollers come together. He jerked his hand back and amputated his finger.",1
Site Safety Manager reported that this VPP Facility had an incident in which an employee was cut while adjusting a belt with an Allen wrench. This resulted in surgery and amputation of the employee's right index finger up to the first knuckle.,0
Employee suffered a skin amputation to the left ring finger while using a meat slicer.,0
"A temporary employee got caught in a rotating shaft, resulting in broken bones.",1
An employee was injured in a construction accident when a bundle of steel concrete supports struck him. Employee sustained a broken leg and was hospitalized.,1
"On 1/22/15 at approximately 8:00 a.m., a worker was working on an overhead shop heater that was mounted on the wall at approximate shoulder height.  He was standing on the floor during the maintenance activity and had pliers in his hand.  He lost his footing and fell on the same level. He fractured his right hip and was hospitalized as a result.",1
An employee was operating an overhead hoist and got his finger caught in the hook. The tip of his finger was amputated.,1
Worker slipped on ice and fractured leg. The worker was hospitalized to set the broken bone.,1
Employee was unjamming a part from a company-made machine when the employee amputated a finger.,0
"Employee was spotting a forklift and was caught between the forklift and trailer, resulting in hospitalization.",1
"Employee was cleaning a room. When she bent down to clean an area inside the door frame, the door swung shut, and severed the employee's right pinky finger at the second joint.",0
Left index finger amputation.,0
"An employee was on the stabbing board to hang the tong line. He unhooked the derrick climber from his harness and when he let go of it he was hit in the mouth, lost his footing, and fell even though his lanyard was attached. His face hit the standpipe of the derrick and the 3 foot fall injured his back.",1
"On January 23, 2015, an employee slipped and fell in the parking lot due to inclement weather.",1
An employee was moving a client back in a chair with the aid of a colleague when an umbilical hernia occurred.,1
Employee suffered serious facial injuries when the valve stem of a pressurized air hydrant hit him resulting in his hospitalization.,1
"Employee was in airplane performing an audit and went to enter the flight deck/cockpit 
and was turning to the left. She fell due to an approximately 6"" step down into 
the flight deck/cockpit. Since she was turning to the left before she fell, her 
body twisted and her back struck the center console.",1
"A crew of employees was performing workover services. The crew was attempting to break out a crossover sub, on top of the casing scraper, using tongs. The employee was using a 36-inch wrench on top of the tongs. The tong operator engaged the tong before the employee removed his hand. The tong pinched the employee's finger between the tong and the wrench. The employee lost the fingertip of his right middle finger.",1
An employee fell down stairs in section 322 of the TD Bank North Garden suffering a broken tailbone.,1
An employee was burned by fly ash in the Power Department at International Paper and was hospitalized.,1
An employee was removing a roll from a machine during normal routine operation when he dropped a heavy core and pinched his finger between two objects. His right ring finger was amputated from the tip to roughly one half of the nailbed. The first knuckle is intact.,1
An employee received a transphalangeal amputation of his left pinky finger while offloading a compactor at the customer's location.,0
"Employee was walking through the facility, tripped over her foot and fell. Employee sustained a hip injury and was admitted to Warren Hospital.

",1
"On January 23, 2015, an employee received a severe injury to his left index finger (partially amputated) when a beam fell from a rack that was not secured, making contact with the employee's back and pinching his left hand between the upright and the support bar.",0
"During startup on a glue roller machine, an employee's glove and hand got caught on a chain/sprocket system. The employee's hand was drawn into the chain/sprocket system, resulting in an amputation of his middle finger on his right hand.",0
"While the employees were picking up tubing, a worker grabbed the bell and pulled it back.  The elevator slipped and caught his finger between the horn's elevator and the bottom of the bell.  His middle finger was amputated from the finger nail to the first knuckle of the finger.  He was taken to the hospital, treated and released.",0
Employee fell through crank scaffold.,1
Employee was working on a can wrench without the lock out/tag out system in place. The jaws of the machine opened and retracted smashing and amputating the tip of the middle finger on his left hand.,0
Employee walking on the top of a form tripped and fell resulting in a broken left forearm.,1
An employee fell approximately 16 feet from the stairway of a drilling rig onto the ground below. The employee suffered multiple fractures and a collapsed lung. ,1
Finger amputation (1/23/2015),0
"On or about January 23, 2015, an employee was hospitalized when he sustained a water blast injury.",1
Employee was moving a stock cart when he smashed his left pinky finger between the handle and something else.,0
"Employer reported that at about 10:15 a.m. on Friday, January 23rd, an employee was leaving a patient's room and tripped and fell, breaking the bones at the shoulder joint.",1
"On January 23, 2015, at approximately 6:30 p.m., a worker from the inside machine shop was training another employee on how to sand the face of a flange using a sanding disk mounted onto the tool rest of a lathe. The flange (part of a very long shaft) was on a lathe rotating at approximately 20 rpms. When the worker went to adjust the sanding disk, his left pinky at the first knuckle joint was amputated by one of the holes in the flange.",0
"Employee was hospitalized after falling from a 27-inch stepladder he was using to work on a piece of equipment. The employee fell and struck a piece of metal on another machine, causing him to break one rib and puncture his lung. The employee was admitted to Springhill Medical Center on Friday January 23, 2015.",1
"On January 23, 2015, an employee climbed onto his truck trailer and fell to the ground.",1
An employee suffered an amputation to the tip of his left pinky finger while attempting to stop a V Belt on an HVAC system with his hand.,0
An employee amputated the tip of his finger when it was caught between a conveyer and door. The employee was pressing doors in a pneumatic press when the injury occurred.,1
"Employee was transferring a mini dumpster into a larger dumpster when the jib attachment slipped off, hit the ground, bounced, and hit the employee.",1
An employee was cutting wood using a table saw when a part of his thumb was amputated.,0
Employee cut finger on a part on 1/19/15 and did not report it to the employer right away. The finger became swollen and painful. The employee therefore reported the incident to the employer on 1/23/15 and was sent to the hospital. The employee was admitted to see a hand surgeon.  Surgery was performed to remove the infection on 1/24/15.,1
Employee suffered an amputation of the tip of his thumb while using a table saw to cut wood.,0
Employee was touching a boom truck used to deliver building materials while his co-worker was trying to lower the boom back into the truck. The boom struck a power line and the employee on the ground received an electric shock and was hospitalized.,1
"On or about January 23, 2015, an employee sustained a finger amputation while placing steel in a press.",0
"On 1/23/15 at approximately 4pm, a packing employee was cleaning a conveyor when the employee's arm got caught in a roller.  The employee sustained a compound fracture to the right forearm.  Employee underwent surgery at Strong Memorial hospital, was hospitalized for three nights and released on 1/26/15.  ",1
Employee was injured while cleaning a pin setter machine.,1
"Maintenance employee was responding to a jammed machine on line #9.  The employee reached into the machine to remove the jam. The machine cycled, feeding another tray that pinched his right ring fingertip between the tray and the frame of the machine, resulting in the tip being amputated.",0
An employee was unloading a service truck when he accidently came in contact with a sharp metal edge of a piece of equipment. The tip of his left index finger received a severe laceration. The employee had the tip of his finger amputated (elective medical amputation).,0
"Worker fell off the back of a golf cart like vehicle used to transport materials. Two inmates were riding in the back. The vehicle made a right turn, hit a bump and the inmate fell off the back. No seatbelts used or restraints, inmates were riding in cargo area.",1
Employee fell off an 8 ft. step ladder while changing a ballast in a Publix Supermarket. Employee fractured his left arm and dislocated his elbow and was hospitalized overnight. Employee underwent surgery.,1
An employee operating a Skytrak aerial lift was seriously injured when the Skytrak fell on its side.,1
"On January 23, 2015, an employee was injured under a tipped over forklift.",1
"An employee received an amputation injury to the right-hand index finger as a result of a U bolt, which fell during the removal of concrete form work at the new Atlanta Falcons stadium.",0
An employee became infected with MRSA.,1
"On January 24, 2015, an employee was injured at a plastic extrusion line. ",1
"Employee was tending to psychiatric patient in emergency room. Patient became combative and pushed employee to the floor. The employee stuck out arm while falling to the floor and broke wrist. The employee was admitted to the hospital on January 24th, 2015. The employee had surgery on January 25th, 2015. The employee was released from the hospital on January 26th, 2015. ",1
"Employee was hospitalized after falling 21 inches through a drain while cleaning. Employee suffered a fractured right knee, fractured rib, and punctured right lung.",1
Employee chocked the wheels of an inbound airplane.  Then the employee placed the safety delineator.  Employee began visual inspection when she slipped and fell on a patch of ice.  This resulted in a broken wrist and hospitalization.,1
"Employee #1 was removing roofing material from the roof when he fell through the roof.  The employee sustained two broken arms as a result from his fall.  The roof had recently sustained damage from fire and had to be removed and replaced.  The roof is comprised of lightweight concrete, tar, and corrugated metal.",1
Worker engaged in warehouse activities experienced respiratory distress. Worker was hospitalized due to an allergic reaction to buckwheat flour.,1
"On January 26, 2015, an employee on a truck trailer caught his foot on a stationary air hose, causing the employee to fall to the ground.",1
Worker amputated the tip of his right thumb while using a knife to cut meat.,0
A worker was chipping concrete off of a rebar when a big piece of concrete landed on his right ring finger. The worker was hospitalized with lacerations needing 10 stitches.,1
Employee working around particle board broke his right ankle and left foot when product fell back and struck him. Employee required overnight hospitalization.,1
A letter carrier fell on an icy driveway at a customer's residence resulting in a broken left ankle that required an in-patient hospitalization and surgical procedure.,1
"On January 24, 2015, an employee slipped on ice in the parking lot and fell.  The employee suffered fractures to the pelvic area and was hospitalized.",1
An employee fell while unloading equipment from her vehicle.  The employee went to put the cart in the upward position after coming in from outside.  Her feet were wet and she fell back and broke her hip.,1
An employee was bitten on the left hand while handling a dog and was hospitalized for about 3 days after the bite became infected.,1
Employee amputated a fingertip. Employee was cleaning the tower roller located in the tower room when the accident occurred. The employee's bone was shaved approximately 3mm at the hospital. The accident occurred on 1/24/1 at 1:30 a.m.,0
An employee sustained severe hand injuries while cleaning a saw.,1
Employee injuries resulted in an overnight hospitalization. The employee was cleaning out the trimming machine.  The hood of the trimming machine fell and impacted the employee's hand.  The force of the impact resulted in severe fractures to the hand that required surgery.,1
"An employee slipped and fell on ice, fracturing her leg.",1
"On 1/24/2015, an employee was lifting a tray of mail to load a truck and felt pain in the stomach.  Employee went home ill at about 9:30 a.m.  Later that day, the employee went to Kaiser Hospital in Roseville, California, and was admitted.  The employee had surgery for a double hernia on 1/25/2015.",1
Employee twisted and injured his right knee while exiting a trailer using the stairs.  The employee was hospitalized for surgery on 1/25/15.,1
"An employee was bringing a newspaper rack out of a storage shed when she slipped on ice/snow that was on the shed's ramp, resulting in her falling to the ground and striking a nearby safety bollard with her leg.  She sustained a fractured tibia and fibula and underwent surgery later that afternoon and was admitted to the hospital.",1
"On or about 1/25/15, an exercise rider, was attempting get on a horse when the horse spooked and turned suddenly.  The employee fell injuring his knee. The employee was hospitalized overnight.",1
An employee suffered a hernia/hematoma while adding Fluorspar onto the ladle of the electric arc furnace.,1
"While lifting a pallet of cases, three cases fell off the pallet. The forklift operator picked up two cases and stacked them on the dash of the standing forklift. When he went to pick up the third case, the other two cases fell over engaging both the dead man's switch and the joystick, causing the forklift to rotate pinning him against an adjacent forklift.",1
Employee operating the mold machine reached around a guard to the area where plastic bottles were molded. His hand was caught and fingers were injured. He was taken to the hospital and had surgery on his fingers.,1
"Employee was working in the warehouse using a forklift.  He exited the lift to handle a task and returned to the second forklift that was next to the first one he used.  As he was backing up, he collided with the first forklift injuring his right ankle. He was taken by EMS to Ben Taub Hospital and admitted.",1
Employee slipped and fell on the ice as she was walking into the store to start her shift.,1
"On January 25, 2015, an employee's thumb was amputated after being smashed by the wringer roll when it came off the adjusting stud. The employee's thumb was caught between the old contact roll base and the bearing box housing of the 10"" wringer roll.",0
Employee slipped on ice in parking lot and was hospitalized for a head injury.,1
"On January 26, 2015, an employee was hospitalized after receiving a deep laceration and possible fracture to the right ankle. Employee slipped while pushing a metal safety cabinet down a roller conveyor line. The employee's foot was lodged between the conveyor and a turn table stretch wrapper.",1
"On 01/26/15, a worker was walking to her vehicle in the parking lot and slipped on the snow and struck her head.  She was transported to the hospital and was admitted overnight because of the impending snowstorm.",1
Employee sustained a foot injury on 1/14/15 when he stepped on a staple. Employee continued to report pain in the foot.  Employee visited the emergency room on 1/24/15. Employee reported to work on 1/26/15 with continued pain in the foot and was sent to the doctor. The employee was subsequently hospitalized for treatment of cellulitis.,1
"On January 26, 2015, at approximately 6:15 AM, an employee sustained a severe left-hand injury while operating a metal roll forming machine. The employee was hospitalized and required surgical amputation of three fingers.",1
"On January 26, 2015, an employee fell approximately 17 feet from a steel grating platform to the ground.",1
An employee suffered an amputation of the tip of his thumb while assisting in rolling metal into a power roller machine.  The employee reached back to get a better hold on the material when his thumb got too close to the rolls. His thumb was caught between a roll and the metal.  The second employee backed the rolls up to release the thumb.,0
Employee was burned while working on a motor.,1
"The employee, walking across a muddy location, slipped and twisted his left ankle and broke his fibula near the ankle.",1
"Two employees were pressure washing mud tanks.  The injured employee slipped and grabbed the end of the wand barrel.  He then came into contact with the pressurized water, resulting in a laceration on his leg.  The water was considered dirty which led to a hospitalization as a precautionary measure.",1
"An accident occurred on or around January 26, 2015, when an employee was working on a MAC valve and was exposed to fly ash.",1
"Employee was setting up an iron worker, aligning lower and upper dies, when it fully cycled.  A piece of the upper die came off when it hit the lower die, striking the employee in the right eye.",1
A positive displacement pump that marinates chicken was clogged. An employee removed the hose that was secured with a clamp and stuck his finger into the pump. The impellers on the pump amputated the tip of the employee's finger.,0
Employee was helping to move equipment using a front end loader. His finger was amputated by the open pin of the front end loader.,1
"A temporary worker for AUC Group (worker #1) was walking to his truck to leave for the day.  Another worker for AUC Group (worker #2) was backing out a truck owned by AUC Group. Worker #2 struck worker #1 with the vehicle. Worker #1 sustained back injuries caused by the accident, which required a surgical procedure to repair the damage. Worker #1 spent one night in the hospital.",1
"On January 26, 2015, at approximately 10 AM, an employee slipped and fell on snow-covered ice on the sidewalk.  The employee was taken to the hospital for treatment with multiple breaks in her right ankle.",1
"While restraining a cat to draw blood, an employee was bitten on the hand/wrist.",1
"Employee sustained 2nd and 3rd degree burns on 8 to 11% of the employee's back. The wind blew a torch flame around the back side of steel that was being cut and under protective gear, catching the employee's street clothes on fire underneath.",1
"An employee traveled to Target in Decatur, Illinois, in a company vehicle to purchase items for a client. The employee slipped on the ice in the parking lot and fell. The employee struck her head on the pavement and was taken to Decatur Memorial by ambulance for treatment.",1
An employee working on an accumulation table grabbed a chain and sprocket when he was trying to get up from the ground.  His hand got caught severely lacerating two fingers and crushing one finger.,1
An employee slipped in the parking lot and suffered a concussion and fractured skull and was admitted overnight to hospital.,1
Employee received a crushing injury to the right-hand thumb when the collapsible railing on a crusher plant's catwalk vibrated loose and pinned his thumb between the railing and catwalk. The thumb was partially severed and the bone broke. His thumb was later amputated at Rochester Mayo Clinic because blood flow to the thumb could not be re-established.,0
While making deliveries the vehicle's brakes failed causing the vehicle to roll. The driver tried to stop the vehicle by chocking the wheel. While attempting to chock the passenger side rear wheel the employee's left index finger was trapped between the metal chock and the tire resulting in an amputation.,0
An employee was walking between buildings at a childhood center when she tripped on a parking lot barrier and fell. She was taken to the hospital and admitted due to a broken hip.,1
"Employee was out on the ramp while driving a tug. He hit a curb and was ejected from the tug. The tug ran over both of his knees, injuring him. He was going to get some baggage from the carousel to load into the airplane. During this process, he hit the curb and got injured.",1
Employee amputated the tip of his middle finger.,1
Employee was delivering a curbside delivery. There was a garbage can lid. She dismounted the truck and stepped on the garbage can lid. Her foot rolled and she heard a pop. She dislocated her ankle and broke three bones.,1
Employee was welding when his shirt caught on fire. He sustained 2nd and 3rd degree burns to his torso.,1
"On January 26, 2015, employee was walking on the roof to tend to a fire in an exhaust stack. The employee slipped on a patch of black ice on the roof and broke an ankle while on the way to the stack.  Employee fell, but did not fall off the roof.",1
"Employee at a customer's residence fell while traversing a stairway on 26 January 2015. She hit her right-side (ribs) against the railing as she tried to catch herself, however, she continued to fall, landing on her upper back. Employee was hospitalized.",1
"An employee was walking down the hall, twisted her ankle, and fell.",1
An employee fell off the back of a truck and was hospitalized.,1
"While working on a cross cutter machine, the employee sustained a partial amputation on the middle and ring fingers of his right hand.",1
The employee's right-hand ring finger was amputated while clearing raw metal stock that was jammed in a lathe.,0
Employee slipped on ice and shattered his left ankle.  Employee admitted to hospital for surgery.,1
"Employee was climbing on some shelving, lost his balance, and fell on top of equipment.",1
"Employee doing routine maintenance of production equipment had a partial amputation of his left ring finger. Employee was installing a heavy-duty magnet in a hopper when he came too close to the side wall. His finger was caught between the magnet and wall, which resulted in an avulsion.  Employee was treated at the scene and then transported to the hospital. To stitch his finger, the doctor had to shave his bone, which resulted in a partial amputation.",0
"At approximately 9:45 AM on January 26, 2015, an employee fell on the sidewalk in front of the entrance to the door.  The employee was using a walker and fell backwards, striking her head on the sidewalk.  The employee was taken to the hospital for treatment and observation.",1
"An employee was in a skid steer with a bucket attachment, and was shoveling up cardboard.  The operator picked up a load and began backing up; he noticed that a piece of plastic was attached to the bucket. The employee decided to detach the plastic from the bucket. In the process of doing this, the employee stood up without disengaging the controls, placed his right hand on the right front post of the skid steer, then reached with his left hand for the plastic. When he reached with his left hand, his chest came in contact with the controls, lowering the bucket. As the bucket lowered, the right arm of the skid steer came in contact with the employee's right index finger and crushed it.",0
A nurse was backing away from a bed ridden patient and tripped on a portable computer resulting in a fractured vertebrae.,1
"On 1/27/15, an employee was operating a horizontal press brake. The employee's finger got caught between the part being bent and a cover plate on the machine, resulting in an amputation.",0
"The rig crew was rigging down the work floor on the rig to change out a valve on the well head. The injured employee was standing on the rig platform reaching for the pin and lost his balance. He fell and hit the cellar ring of the well head. He injured his right ribs, right shoulder blade and punctured a lung.",1
"Employee opened up a strainer within a processing line that was not de-energized, causing approximately 2000 gallons of TDI to spill out. The employee and two others were sent to the hospital. Two were treated and released, while the employee directly exposed was hospitalized.",1
Worker fell about 42 inches from a scaffold when a scaffold plank broke. ,1
"On January 27, 2015 at approximately 3:07 pm, employees had placed a casket in a five foot grave.  When they lifted the liner to cover the casket, the ground gave out and one employee fell into the grave breaking both his leg (both the tibia and fibula). He was taken to Beaumont Army Medical Center for in-patient hospitalization and surgery to repair his leg.",1
Employee lost a fingertip during preventative maintenance operations of a conveyor belt.,1
"An orange harvester was on a 13 foot ladder when he became off balance, fell, and landed on the rim of the metal tub.  He suffered a laceration to his liver.",1
"On January 27, 2015, an employee's hand was injured when he reached into a piece of equipment to remove a jam, resulting in hospitalization.",1
"On or about January 27, 2015, an employee sustained an amputation of the left middle finger, distal to the first joint, while removing a jammed product on the Go-Cup Line.",0
Temporary employee sustained amputation of ring finger while working on wire reel in plant #2 of host company Encore Wire Corp.,1
"On or about January 27, 2015, an employee sustained serious amputation injuries after being struck by a pin setter.",1
Employee lost a fingertip in the closing lid of an internal valve when removing the trailer's internal valve.,0
"Worker was inspecting a flat roof. The surface of the roof was icy. The worker slipped and fell on the same level, fracturing his tibia and fibula bones directly above the right ankle. He was hospitalized and required surgery.",1
An employee had the left pinky fingertip amputated while setting up material on a lathe.,0
"Employee was in yard #1 cutting metal with a 6 ft. cutting torch when sparks from the torch ignited his shirt. He sustained second degree burns to the upper right side of his torso, arm, chest, and a portion of his abdomen.",1
"An employee suffered a broken clavicle and a concussion when he collided with another employee while setting up a portion of the downhill ski slope at the Red Tail Finish Line in Beaver Creek, Colorado.  Specifically, the employee was working at the bottom of a jump, while another employee pulling a toboggan failed to see him in time and collided with him.",1
"An employee welding a cable guide pipe to a tank containing road tar suffered burns to his right side legs, arm, neck, and face when the contents of the tank caught on fire.",1
"Employee was operating a drill tap machine.  As he was making an adjustment for a new job on the tooling, his hand contacted the rotating spindle shaft. His glove got caught on the shaft, and his hand was entangled.  This resulted in amputation to the first knuckle of his left-hand middle finger.",0
"On or about January 27, 2015, at 3:45 p.m., an employee was hospitalized for surgeries related to the amputation of the two end phalanges of his index finger and the tip of his thumb on his right hand.  He was injured while using a table saw to cut wood. The piece he was cutting kicked back, and the employee's hand fell into the saw blade. Using a table saw was a biweekly task of about an hour at a time.",0
Employee slipped on ice and broke the left leg.,1
"Worker had just picked up a load of chemicals for the supplier and he was removing the wheel chocks from the trucks wheels. He had removed the first set of wheel chocks and moved to the second set. As he pulled them free from the wheels, he tripped over the first set he had pulled. He fell to the ground and landed on the second set of chocks. He broke his hip and possibly injured his back.",1
"On 1/27/15, an employee was admitted to the hospital with a fractured skull after falling on ice in the company parking lot.",1
"An employee was moving a mold with a crane in the research development pilot cell.  While the mold was being transported, the end effectors holding the mold became disengaged, allowing the mold to fall approximately 3 to 4 feet to the floor. The mold struck and crushed both of an employee's ankles.",1
Employee amputated the tip of his left ring finger while cleaning grease from a small print press roller with the equipment running.,1
Employee was about to get on a forklift when he fell and fractured leg.,1
"The rail that kept beef intact was broken, causing a side of beef to fall on the floor. A worker went to help move the side of beef, which struck his ankle and injured him.",1
"An employee was picking up trash in the turf at a golf course and was bitten by an insect, believed to have been a spider.  He was subsequently hospitalized when his finger became inflamed.  ",1
"On January 26, 2015, at approximately 8:06 a.m., at the Tel Hai Retirement Community, the worker sustained a partial amputation. At the time of the incident, workers were using a forklift truck to lift a job box (metal box) onto the upper level. While taking the job box off of the forklift truck, the worker's hand was pinched between the forklift truck and the job box. He was taken to Brandywine Hospital Emergency Outpatient. He sustained a bone fracture and partial amputation of his right fourth finger, distal phalanx, distal tuft, with a loss of overlaying soft tissue. He was treated and discharged.",0
Employee caught his hand in a router.,1
"An employee was unwrapping a pallet of cardboard boxes when he stepped back and his left foot was run over by a forklift, requiring surgery.",1
An employee had his left hand crushed while using a crow bar to help set a concrete sewage distribution box.,1
"Employee was working on a ladder. He slipped and instinctively grabbed onto a piece of equipment to try and steady himself, causing an avulsion to the left-hand middle and ring fingers. This resulted in hospitalization, and those fingers were amputated.",1
Employee was cutting a piece of PVC pipe on a table saw when his left middle finger suffered a cut by the blade.,1
"An employee fell after slipping on ice. She hit her head, resulting in a subdural hematoma.",1
Employee had his left fifth (pinky) fingertip amputated when his hand was pinched between a high-torque wrench and a bolt head.,0
An employee was in the transport office at approximately 3:30 a.m. using a paper cutter and amputated the tip of his left thumb.,0
"An employee was changing a forklift battery that was suspended from a hoist.  While the employee was moving the hoist, the battery slipped off the hoist hook and fell on the employee's right foot.  Three toes on the employee's right foot were amputated.",1
"On or about January 28, 2015, an employee sustained crush/amputation injuries to the right hand while removing a jammed part on the OBI Press.",1
"Employee was driving an electric pallet jack straight down on a ramp when she lost control and pinned her left leg between the mid-rail and the pallet jack, resulting in a fracture.",1
Employee slipped on ice going to lunch at Building C.,1
Employee fell off an eight and a half foot ladder and broke a shoulder.,1
An employee in Warehouse #1 received a partial amputation of the middle finger of the left hand while working on an extruder machine.,0
"An employee lost his balance after stepping onto the top step of a step ladder and fell onto the concrete below. The employee was admitted to the hospital on the evening of January 28, 2015, with unspecified injuries.",1
"Employee was cutting a plexi-glass panel using an air pressurized hand-held saw.  The head of the saw detached from the body, sending the tool into the back of the employee's left hand. The employee experienced a deep laceration to the back of the left hand, which required surgery and in-patient hospitalization.",1
"Worker was hospitalized due to a fractured thumb from using a 6"" grinder.",1
"Worker injured his left pinky and ring finger when his left hand, which was on the line, was pulled into the main hook lock during the untangling of a crane's lines.",1
Employee fell during the performance of pick-off work at the facility. ,1
"The employee was at the laydown yard picking up wood poles to load onto a trailer for some work later. While operating the grapple truck, he picked up two wood poles and as he adjusted the poles to fit onto the trailer, the poles fell. One pole fell to the ground. The other pole struck the employee while he was seated on the machine. The pole glanced off his hard hat and hit his left shoulder and cut the left side of his neck.",1
"On January 28, 2015, an employee was using an 8-foot A-frame ladder to change out pipe fitting at the Hydro Cracker Unit.  The employee fell from the ladder while descending, breaking his lower right leg in the ankle area.  Employee was transported by ambulance to Pauls Valley, then transferred to the Norman Regional Hospital where he had surgery to set the bone.",1
Worker was hit on the left forearm by a backhoe's bucket while he was standing in a 3 feet deep trench parallel to another trench approximately 4 feet away. The backhoe was approximately 8 feet away from the injured worker. The dirt in the trench where the backhoe was located gave out and caused the backhoe to swing and hit the employee.,1
Worker fell when exiting a shuttle bus. Worker hit the shuttle stairs and injured lower back and leg.  Worker was hospitalized.,1
An employee in the lawn/golf course maintenance department was spreading fertilizer and reached into the hopper to push lime further down the hopper. His gloved hand was caught by the agitator causing a deep cut to his left middle fingertip. The employee was hospitalized and the next day part of his finger was amputated.,1
"On or about January 28, 2015, an employee was sent to the hospital when the school bus that he was working under fell off its jack stands and onto the employee crushing his pelvis.",1
"An employee was operating a rotary die press in the die cutting department on January 28, 2015.  The employee sustained an amputation on the left hand below the first joint of the thumb while cleaning it.",0
"At approximately 4:30 PM on January 28, 2015, an employee removing cones in the ""closed lane"" was struck by a motor vehicle driven by a member of the general public. The employee's left leg sustained a fractured femur and fibula. The employee was transported and admitted to Geisinger Medical Center in Danville, PA.",1
"Maintenance employee for Southwestern Plating was working inside a circuit breaker box that was not locked out. A flash fire occurred, burning the employee's arms (upper and lower), face, neck, and torso.  The employee was rushed to Memorial Hermann Hospital (Burn Unit) where he is currently hospitalized.",1
Employee was walking into work when she fell breaking her leg in two places.  Employee was hospitalized.,1
Employee operating an ELVO omnicutter reached into the machine to clear some debris. Employee severed the tip of the right middle finger halfway through the nail. Bone loss occurred.,0
"On January 28, 2015, an employee that was walking through the parking lot slipped on ice and fell due to inclement weather .",1
"Employee was moving a 55-gallon barrel of frozen fruit juice off of a pallet and it landed on the instep of his left foot, fracturing his foot and requiring surgery to repair.",1
An employee was walking into the establishment when he slipped on ice on the walkway and dislocated two fingers on his hand.,1
"On 1/27/15, the employee was getting a cat out of a carrier with the assistance of another person.  The other person was holding the box and she was getting the cat out.  The cat bit her hand.  After it continued to swell, the employee was admitted on 1/28/15 overnight for IV antibiotics.",1
"The injured employee was using an 8-foot step ladder to apply a vinyl window cling decal to the front store window.  A second employee was holding the base of the step ladder due to windy conditions.  The second employee was unable to prevent the ladder from toppling over as the decal may have acted as a sail.  The injured employee fell to the ground and was hospitalized as a result of the following injuries:  head trauma when he was knocked unconscious, possible concussion, laceration to left side of his head, fractured right arm, and stiches in the right elbow.  He was initially taken to Parkland Health Center in Farmington, Missouri, and then later transported to Barnes Jewish Hospital in St. Louis, Missouri.",1
Employee was operating a wire press machine.  Employee stepped away and lost his balance. He braced himself on the machine and his right hand came in contact with the wheel.  The employee sustained an amputation of the fingertip flesh and fingernail on his right-hand middle finger. No bone was amputated.,0
A wall form fell on a worker while constructing an elevator shaft.,1
Employee was wiping off the plate while the machine was running. The rag got caught in the machine pulling the employee's hand into the machine and catching it between the print cylinder and the anologix cylinder. The right 4th and 5th fingertips were amputated.,0
Employee was exposed to chlorine gas while performing a line break. He was hospitalized overnight.,1
"Employee was stacking milk crates in a cooler when the crates became unstable. He tripped, hit his head on shelving, and injured his back from the fall to the floor.",1
"Employee was walking out front entrance of retail store when he slipped on a patch of ice and injured his ankle.  Afterwards, he was hospitalized.  ",1
A truck driver fell off the truck bed and sustained severe head injuries.,1
"An employee fell through an opening 15 feet to the ground. The employee broke the left hip, ribs, a tibia, and sustained damage to the spleen. The employee was admitted to the hospital and underwent surgery.",1
"Employee was painting the interior space on a 6000-gallon water tank. He was wearing a fresh air respirator; the compressor was outside with a line that ran into the confined space through an access point on top. The tank attendant didn't get a response so 911 was called and entry was restricted until the air was confirmed clear.  By the time the all clear was issued, firefighters arrived and performed rescue operations. The employee was taken to Kootenai Medical Center. He had a pulse and was breathing on his own, but was still unresponsive. His PPE included a  Survivair Respirator with compressor, full enviro air suit, Tychem SL chemical suit, another paint suit underneath, and a Bullard hose system.",1
Worker was working off a 6 ft scaffold that had been erected the day before. He adjusted the scaffold so he could pour concrete and fell. He was admitted to the hospital.,1
"An employee tripped over the doorway coaming and fell to the same-level surface.  Employee suffered serious injures, including broken bones.",1
"A scaffold board was removed to load mortar onto the scaffold. As the scaffold board was placed back into position, an adjacent scaffold board fell from the third tier, striking an employee in the head. The injured employee was on the ground loading custom bricks into a bucket.  He was taken to the hospital and admitted.",1
"Employee was working on the bed of a bucket truck approximately 5-ft high. He was tightening a bolt on the truck with a wrench; the wrench slipped, causing him to lose his balance. He fell off the truck and hit his head.  He was taken to St. Francis Hospital.  He was in the emergency room and then transferred to the intensive care unit.",1
"On or about February 29, 2015, an employee sustained three broken fingers while lowering a bag filled with ore (manganese) material over a hand rail using a manifold and a rope. Employee's pinky finger was later amputated.",0
"Four employees were cutting an opening in a concrete wall for a door. The wall fell outward onto another employee, striking his back and pelvis area. His injuries required hospitalization.",1
"Employee had just finished unloading a truck into the paving machine. He had his hand on the gate of the truck. The truck operator latched the gate from the cab, crushing the pinky finger on the employee's right hand.",0
Employee was cutting an avocado when the knife slipped and cutoff the tip of the left ring finger.,0
An employee on an electric rider pallet jack struck a concrete column and crushed his foot between the pallet jack and the column.  At least one toe was amputated and he was hospitalized overnight.,1
An employee fell from the second story of a residential home and was injured as a result of the incident.,1
Worker was burned on her rear shoulder and back when a pressurized hot water hose broke off of a laundry machine.,1
Employee was cutting a hose with a X-Acto knife when he cut his left hand requiring five to seven stitches.,1
An employee fell through a skylight while checking for ice on the roof of the building.,1
An employee was sweeping the facility when a stack of pallets fell and broke the employee's ankle.,1
"On or about January 29, 2015, an employee had his hand pulled into a saw.",1
"On January 29, 2015, an employee driving a pallet jack over a dock plate fell to the ground.",1
"Employee used his hands to straighten and pull boards toward himself in the trough of the trim saw. His finger was caught between two boards coming down the chains, amputating the top of the ring finger of his left hand. He lost flesh and the bone will be cut off.",0
Worker was injured when he fell out of the back of a pick-up truck. The truck was parked and not moving; the employee tripped over the wheel well. He broke his collar bone and some ribs.,1
Employee was cleaning out a pre-breaker feed and reached into a rotating auger to remove debris. The auger caught his right index finger. This caused a laceration and an amputation to the tip of his right index finger's first knuckle.,0
Employee was standing underneath a bridge under construction when a 2x4 piece of lumber fell off the bridge and struck him in the shoulder. He was hospitalized as a result.,1
Employee cut the tip of his left thumb off with regular scissors while dressing a window at the NorthStar Mall location.,0
"An employee was injured on his right shoulder, arm, and hand by hot water while cleaning a hopper.  Based on his condition, he was sent to the clinic then further referred to the hospital.",1
"On or about 1/29/2015, two employees were riding in the back of a forklift.  One of the employees jumped and was caught by the back of the forklift on his right ankle. The employee was hospitalized and had surgery.",1
"On or about January 29, 2015, an employee was hospitalized for a finger amputation after an injury was sustained while working on/near racking used to stage lumber.",1
"On January 29, 2015, an employee slipped and fell on a concrete sidewalk due to inclement weather and icy conditions.",1
"An employee was checking on some kids who were on the property up on the hill. When he was coming down the hill, he slipped and twisted his ankle.  He was hospitalized for surgery.   ",1
"On January 29, 2015, an employee slipped and fell on ice in a parking lot due to inclement weather. ",1
"A worker was cleaning a mold. After finishing one side he started to go to the other side when the metal grating moved/shifted. His foot became unbalanced, causing him to slip and fall. His left hand got caught in the clamp or a piece of the machinery, which cut him.",1
An employee using a miter saw at a customer's house cut off the tip of his finger.,1
An employee was at a Travel Centers of America truck stop.  The employee was walking in the parking lot and slipped on the ice.  The employee fell and hit their head causing a skull fracture.  The employee was admitted to and hospitalized at OSU Medical Center.,1
Employee experienced an amputation to the right thumb when exposed to an unguarded pulley.,0
"Employee was opening a curtain on a curtainside trailer. He was pulling two curtains at a time when one of the buckles tore away from the curtain, causing the employee to lose his balance. The employee fell and struck his head on the concrete ground.",1
"On January 29, 2015, an employee slipped and fell on an icy driveway.",1
An employee was struck by a motor vehicle while crossing the street to return to his vehicle. ,1
"On 1/29/15, an employee amputated the tip of the right middle finger. The load on
a forklift struck the load on a cart the employee was holding, which pinched the employee's finger between the cart and the load.",0
"Employee's 3rd finger on his right hand was amputated on January 29, 2015, due to a work related injury which occurred on January 9, 2015. The injury occurred during the repair of an 8 foot mower deck.",0
An injured employee was hospitalized for surgery following a workplace accident.  The employee was found adjacent to his PIV with crushing injuries to his left foot/ankle.,1
"On or about 01/30/2015, an employee amputated his finger while cutting lumber with a power tool. The lumber was covered with ice; when the blade struck the lumber and ice, it kicked backed and cut the tip of the employee's left thumb.",1
"Worker was using a portable handsaw to cut lumber when the saw jumped to the one side where the worker's left, gloved hand was holding the lumber.  The blade caught the worker's glove pulling it toward the blade and the worker lost the tip of his left thumb.",1
"An employee was operating a lathe in the packing maintenance shop. The employee was using emery cloth to buff a shaft when the employee's gloved right hand was pulled into the lathe. The employee fractured the right wrist and three fingers, requiring an overnight inpatient hospitalization and surgery at UNMC hospital in Omaha, Nebraska.",1
"An employee, who was walking down the jet bridge, fell and injured her right shoulder, requiring surgery.  The jet bridge was slippery from inclement weather.",1
"An employee got his finger caught between a pallet and a platform, while a forklift operator was lowering the pallet down onto the platform.  Employee suffered an amputation.",0
Employee fell approximately 16 feet through the rafters of an apartment complex.  He had been loading roof with roofing material and was coming down at the time.  He injured his ankle and tibia. Employee was hospitalized for surgery to repair the break.,1
Employee fell on hard-packed snow and fractured her wrist. The employee was kept overnight in the hospital for surgery.,1
"Pipeline was being cleaned using a pig. The pig shot out of the pipeline and struck the employee, causing injuries to the lower part of his body. ",1
Two employees were trying to reset a chain on a sprocket that raises and lowers oven doors. The injured employee's finger was caught between the chain and the sprocket. He amputated the distal portion of his ring finger on his right hand.,0
"Lopatcong Police reported a man fell off a ladder, was treated at scene, and transported to St. Lukes Warren Campus.",1
Employee attempting to correct a fault on the canning machine labeler fell when the guard bracket she was standing on came loose. She was about 3.5 feet from the floor and broke her elbow.,1
"An employee was walking toward a conex storage system and slipped, popping his kneecap out.",1
The injured employee was working on the spreader applying dry fertilizer to the field.  He was performing maintenance.  He went up the ladder/staircase to the operator's cab to get the owner's manual.  He lost his balance and fell to the ground.  He was then hospitalized.  ,1
"While using a sanitary grease pump, employee's left-hand middle finger got caught in the pump. The first index of the employee's finger was amputated.",1
"An employee was polishing a spindle on a lathe using an emery cloth.  A keyway slot on the shaft caught his right index finger, resulting in an amputation of the finger. There was no bone loss.",0
"On January 30, 2015, at approximately 8:30pm, three 70 inch diameter rolls, weighing 350-380 lbs. each, fell towards an employee and pinned him against a wall resulting in a fractured hip and foot.",1
"On or about January 30, 2015, an employee suffered an amputation of three fingertips while operating a rolling mill machine. ",1
The employee was performing repair and maintenance on the damper unit. The unit door was held by another employee. When the door was released due to the strong negative air pressure the door slammed onto the second employee's hand causing the amputation of his right ring and middle fingertips.,0
An employee came out of the maintenance shop into a parking area and slipped on some ice.  He fell backwards and hit his head. ,1
"Employee was cleaning conveyor belt, when her finger got caught between the belt mesh and drive sprocket. She received a crush injury to her index finger, between the first and middle knuckles.",0
An postal service employee slipped on ice while delivering mail. The employee suffered a broken leg and was admitted to the hospital overnight.,1
"On 1/30/2015, an employee fell on ice and received an elbow injury. At the time of the incident, the employee was checking ""exit door"" access and egress. The employee fell and shattered his right elbow. The employee was taken to the hospital. The employee received surgery on 01/31/2015.",1
Employee fell and received lacerations to the ear and cheek while attempting to place a temporary cap over a well-water casing. The well casing is at ground level.,1
An employee was hospitalized after he got his hand caught between the conveyor belt and the T-Plate.,1
An employee using an air-powered winch to pull a trailer from the wash bay severed/amputated the middle and index finger of her right hand.,1
Employee was assisting a customer and was asked to cut a piece of wood.  The employee used a miter box saw and lacerated his pinky and ring finger. Employee was hospitalized on 1/30/2015.,1
Worker was pulling a strap-on tarp on a flatbed truck when the bungee cord snapped. The momentum caused the worker to fall from the truck. The worker was injured and hospitalized.,1
An employee slipped and fell through a ladder hole to the next lower level while performing lashing on the upper deck.,1
Employee hospitalized with broken ankle after a large part fell on his leg. ,1
Worker amputated his thumb from the knuckle to the tip with a large knife while filleting a fish.,1
"Worker was hospitalized when the PIV he was operating slipped on wet service. The worker stuck a leg out, crushing the foot between a building beam (or structural member) and the PIV.",1
Employee struck by Air Train.,1
"The employee placed hand into an extruder machine while trying to feed film into the machine and came into contact with the metal auger in the machine severing
three fingers on the right hand.",1
"Worker was attending a training. When it ended, she was assigned to remove the decorations. She stood on a chair, fell, and fractured her tibia. She was taken to the emergency room where she was admitted for surgery.",1
An employee was hospitalized after suffering a broken ankle from slipping on ice in the parking lot.,1
An employee picking mushrooms on the second level of the mushroom house fell through an opening on the walking surface and landed on the lower level breaking her leg.,1
"Employee was working on a platform ladder, sorting labels on milk jugs and putting them away for inventory. The employee turned to descend the ladder and missed a step. The employee fell approximately 6 feet.",1
"An employee had just finished delivering a package and was walking down a set of carpeted stairs when the employee tripped. The employee fell down about 4 to 5 stairs and landed on the ankle, fracturing a bone in the lower leg; employee required surgery and a hospital admittance.",1
"On 1/31/15, an employee amputated the tip of the left middle finger in a Garrido paper sheeting machine while removing a paper jam. The employee's finger was caught between a metal pusher attached to a belt and the machine itself, removing about 1/2"" of the employees left middle finger.",0
An employee operating a pendant-controlled overhead crane was injured when they were moving banded strips of steel to place them into storage. Some of the steel was dropped and the employee received a leg injury.,1
A young employee returning from a break was struck by a pick-up style truck in the parking lot of the store.  Employee suffered compound fracture of his left tibia. Employee was rushed to Aria Hospital/Torresdale Campus and later to Children's Hospital of Pennsylvania for an emergency surgery.,1
"Employee fell approximately 10 feet from a scissor lift. Employee slipped out between the rails, resulting in two broken ankles.",1
An employee was thrown from a fork truck when it tipped over as it was going up a ramp.,1
An employee was hospitalized overnight after being struck in the mouth by a hand-held power angle drill. The accident occurred at the job site at approximately 8:00 a.m. on 01/31/15. The employee sustained massive lacerations to his cheek and jaw and broke two teeth.,1
"On January 31, an employee fell off an A-frame ladder while carrying a box weighing about 30 pounds. The employee fell about 3 feet to the ground below and had a loss of consciousness.",1
Worker tripped over a box while walking backwards.,1
Employee broke his leg falling through a platform.,1
An employee fell at a loading dock and suffered a broken leg.,1
"On February 1, 2015, worker cut tip of finger, resulting in an amputation.",0
"An employee slipped on ice when walking to the employee parking lot, injuring an ankle and resulting in hospitalization.",1
Employee was hospitalized after a cleaning hose came loose from the clean-in-place system.  The employee was sprayed in the face with cleaning solution. He was treated in a local ER and then transferred and admitted to Wellstar Cobb.,1
Employee engaged in housekeeping operations slipped on a wet floor.  Employee fell on his back and struck a curb.  The employee was admitted to the hospital.,1
The employee was setting precast tilt wall panels. The bottom of a panel slid out of place when the angle bar used to hold the panels in place broke. The employee's finger was pinched between the panel and the pin used to set the distance between the panels.,1
"Employee lifted the seat of a golf cart to see why it did not start. He jiggled some wires and when he pressed on a belt, the belt started to turn. The tip of his middle finger got caught between the turning belt and pulley, which amputated the tip of his finger down to the first knuckle.",0
"An employee fell from the salt spreader of his plow truck and broke four ribs, one of which punctured a lung.",1
The employee was injured while setting a piece of cast stone. His hand got pinched between two pieces of stone.,0
"The employee was performing maintenance on a piece of machinery next to a bag machine where film was being pulled. The bag machine started malfunctioning. The employee began to re-route the film on the bag machine while the equipment was energized. The employee got his left hand caught in the rollers of the bag machine, which pulled his hand into the gears and belt.",0
Employee was hospitalized after he fell 10 to 11 feet from the top of an 11-foot ladder.,1
"Employee had left foot caught between the steps in the escalator, resulting in a laceration to the foot.",1
"An employee was moving a load with a crane onto the forks of a Big Joe-powered industrial vehicle.  After the load was on the forks and the sling around the load was removed, the hoist hook was not raised before the load was moved.  When the Big Joe was moved forward, the hoist hook came over the mast of the load and swung and struck the employee in the face.  The employee then fell backwards to the ground. The employee was hospitalized as a result of the injuries sustained.",1
"The injured employee had his left hand on a forklift, signaling to the operator to lower the forks due to an unbalanced situation with a parts catcher screen assembly.  In the process of lowering the forks the screen assembly shifted smashing the tip of the employees index finger on his left hand between the bonnet of the manual valve of the screen assembly and the forks.",1
"Employee climbing down a ladder missed the last step and fell, breaking two ribs. Employee was taken to the emergency room and was hospitalized.",1
"At approximately 4:30 a.m., an employee was changing a carbon monoxide cylinder. The employee fainted, fell, and fractured his nose. He was transported to Saint Elizabeth Hospital in Beaumont, TX; due to the elevated amount of carbon monoxide in his blood, he was then transferred to the Memorial Herman Hospital and admitted at 11:30.",1
"An employee was cleaning out the chute at a work station called the hub cutter. While cleaning out the chute, a wheel rolled down from another work station and pressed against the back of the employee's leg, causing second and third degree burns to the calf.",1
"An employee walking in the parking lot, slipped on snow/ice and fell injuring his hip.",1
" On 2/2/15, an employee was struck by a plow truck while filling a tanker truck with propane.",1
Employee was delivering mail on foot when he was hit by a vehicle while crossing the street.,1
"A worker was exposed to a struck-by hazard during the unloading of PVC pipes. A forklift unloading pipes on one side of the truck accidentally caught pipes on the other side, causing them to tip and fall on a worker standing on the opposite side of the truck. The worker received severe bruising to his hands/forearms and was hit in the head.",1
"An employee slipped on the floor and struck an electrical box while cleaning at the end of his shift. The employee sustained three broken ribs and a collapsed, bleeding lung.",1
"On 2-2-2015 at about 8:30 a.m., the injured employee was driving a baggage tractor, towing four empty dollies. A forklift was being driven forward with cargo; the operator could not see the travel path and collided with the tractor.  The injured employee experienced internal injuries to the stomach from impact with the tractor wheel. The employee was taken to the hospital and is in stable condition.",1
Employee fell from a deck at a height of approximately 8 feet and broke an ankle.,1
"Employee, who was wearing gloves, was pulling rope. The rope wrapped around the employee's finger, resulting in an amputation of the left index fingertip.",1
"An employee fell from a three-step, step-ladder while installing a panel. The employee fell to the ground and broke the right arm. Surgery was completed on February 3, 2015.",1
Employee walking outside in the facility's parking lot slipped on ice and suffered a head injury.,1
An employee was repairing a forklift step using a vise. The employee tried to bend the step back into shape by pushing up on the step and injured his lower back.,1
Employee hospitalized for ankle injury after slipping and falling off of a ladder.,1
Employee was struck by an excavator while compacting soil with a Wacker Packer vibratory plate.  The employee's ankle was dislocated. He was admitted to the hospital and underwent surgery.,1
An employee fell approximately 22 feet from a scaffold while fixing a broken piece of glass on a third-story apartment.,1
"Employee was operating a custom bending press break machine. He was bending a small metal part, which kept slipping out of place. The employee tried to hold it in place with his finger while operating the press with his foot to bend the metal. The metal slipped, and the press came down on his left index finger instead of the metal part, smashing and amputating it just proximal to the fingernail bed.",0
"On February 2, 2015, an employee was hospitalized due to a slip/fall accident, which occurred in the parking lot of the worksite.",1
Finger cut accident.,1
"Employee was checking parking lots and putting down salt to prevent slips and falls. He pulled up to the front door to go inside for something. He stepped out of the truck, took a step or two, and slipped on ice, falling and landing on his hip and lower back.",1
A worker amputated two fingertips while operating a hydraulic press. ,1
"Employee was standing on an elevated rail with his back to laundry bags traveling on a conveyor system.  A laundry bag struck the employee, knocking him into a commercial iron, which burned his left arm from his elbow to his hand.",1
Employee was lifting a box about 10 lbs. and her arm went numb. ,1
"On 2/2/15, an employee suffered a broken finger and crushed hand requiring hospitalization while cutting a steel support for a silencer.  ",1
An employee fell from a 32 inch table while engaged in welding operations and was hospitalized.,1
An employee was using a glue gun and felt an electric shock. The employee fell on the floor hitting his head. He was hospitalized due to possible head concussion.,1
"On or about February 3, 2015 at approximately 4:15 p.m., an employee was performing set-up on a cold heading machine and while jogging the machine over, he reached into the machine while simultaneously stepping on the brake, causing his fingers to be caught in-between the punch and the die on the machine. The employee suffered two fractured fingers and a finger tip amputation.",0
Worker lost the tip of her pinky finger in a feeder machine while pushing prepackaged food (macaroni and cheese) forward.,0
An employee was cutting Plexiglass with a circular saw when the saw slipped out of his control and amputated the first digit of two fingers.,0
Carteret Police called and notified office that a truck tipped over and hit a cell tower.,1
Employee was bitten by bed bugs while providing care at a patient's home.  The employee had an allergic reaction to the bites and was hospitalized for treatment.,1
"On February 3, 2015, an employee's index finger (right) was crushed while clearing a jam within a bottle washing machine.",1
"An employee was walking behind a ditch witch, digging a ditch for underground fiber optic lines.  The equipment hit a rut in the ground and fell to the side, trapping the employee's right hand between the controls and a tree.  The right thumb was severely cut and was barely hanging on by two pieces of flesh.  The employee was transported and admitted to Grady hospital.",1
An employee slipped on ice and fell in the parking lot. She was hospitalized for a broken hip.,1
"Employee was struck in the face by a handheld, gas-powered saw he was using.",1
"During an operation in Odessa, Texas an agent received a gun shot wound to his right foot.",1
A worker was cleaning the lint cleaner before the machine came to a complete stop. The worker's glove was caught on the saw pulling her right hand into the machine.,1
"While removing a bar that was stuck under the pusher system, an employee's finger was caught under a conveyer belt and pulled under the bar guide, resulting in an amputation to the left pinky finger.",0
An employee with a heart condition was hospitalized after shoveling snow.,1
"Worker climbed a mobile ladder-platform; he then climbed over the ladder-platform guardrails onto a chain-driven paddle conveyor. He was trying to reach a gasket on a pipe feeding the conveyor. He was wearing a hard hat, but was not wearing personal fall-arrest equipment. As he tried to reach for the pipe gasket, he lost his balance and fell more than 11 feet to the concrete floor below, landing on his back along with the pipe. He was taken by ambulance to Northwest MS Medical Center-Greenville where he underwent surgery to remove his ruptured spleen.  He was then transferred to the University of Mississippi Medical Center in Jackson with the following additional injuries: fractured pelvis, fractured ribs, fractured shoulder blades, etc.",1
An employee slipped on ice in the parking lot while walking from his car to report for work in the morning.  He sustained a fractured left ankle and was admitted to the hospital.,1
"An employee in Store 035 at 510 Fairview Road, Woodlyn, PA 19094, was injured when his left arm was caught in a trash compactor.",1
The employee started operating a forklift when the throttle became stuck.  The employee then jumped from the forklift and got his foot pinned between the forklift and another piece of equipment.,1
Employee was going down stairs that had snow on them to check movement underneath the grain silos.  He slipped down the stairs or fell forward and hit his head on the concrete floor.,1
"At approximately 8 PM, 2/3/2015, a worker was struck by a hand-hole cover, sustaining unspecified injuries to the head/face.  He was part of an Underground Trouble team assigned to investigate a manhole explosion/no power condition. The initial report is that he was in the process of tapping the cover with a hammer to loosen it when the cover was blown up into his head/face.",1
A worker was lifting a 42-pound part onto a shelf at chest height. The part fell onto his right-hand fifth digit and partially severed it at approximately the location of the cuticle.,1
"Employee was walking in the very center of 10-feet tall racking on plywood and then stepped down to the next level on a piece of plywood that had no center support. It collapsed and he fell 6 feet to the next level.  

He was disassembling the racking system just before he fell",1
An oxy-fuel cutter caught his lower right pant leg on fire on 1/31/15 resulting in third degree burns on his right leg from the ankle to the knee. The worker was hospitalized on 2/3/15 for treatment of the burn injuries.,1
Employee received a splinter from the ladder while climbing out of the elevator pit.,1
Employee was manually loading a piece of pipe onto a trailer. The pipe shifted and cut off the tip of the employee's right middle finger.,0
"Employee using a sledge hammer to straighten a piece of metal had his grip on the hammer slip. The handle of the hammer then came back and struck his jaw, breaking his jaw and knocking out several teeth.",1
Employee slipped on ice in the parking lot next to her personal car. She suffered a fractured hip and discomfort in her left side.,1
An employee's finger was caught between the top and bottom of the top drive track causing an acute traumatic amputation of the left distal index finger.,0
Employee was caught between a backing 18 wheeler and the truck dock.,1
"While using a powered roller to form a piece of metal, the employee's glove caught on a piece of metal, pulling his hand into the roller. Employee suffered an amputation of the left-hand pointer finger up to the second knuckle and damage to the left-hand thumb, which was stitched back together.",0
"Employee was replacing the panel on a Case 650K dozer.  The panel slipped and the employee's hand made contact with the fan, resulting in a major laceration and bone crushing.  Employee was admitted to the hospital and underwent hand surgery with a hand specialist.",1
An employee was walking in a parking lot and turned quickly to see a salt/sanding truck coming through the lot and slipped on ice. The incident occurred at approximately 10:55 PM as the employee was walking to her car.,1
"Employee was driving a standard roll-off truck for picking up containers of spent material from various metalworking companies in the area.  He was on-site to pick up a metal box type container from a customer.  The employee hooked the truck's wire rope cable and winch up to the box and engaged the winch briefly.  The box was moved close to the bed of the truck and raised a few inches off the ground.  The winch was disengaged.  He then placed a tarp over the box.  As the employee was placing the tarp, he stepped onto the chassis rail on the back of the truck.  At this time, the hydraulic winch pulled the wire rope slightly.  The employee's left foot was caught between the box and the back of the truck.  Medical services were called.  He was taken to a hospital.  Several bones were broken in the left foot. The employee underwent surgery, and the employee was hospitalized.",1
Employee was lifted up on the forks of a forklift and fell 14 feet to the ground below striking his head. Employee was hospitalized.,1
"An employee leaving the work place, slipped and fell on the pavement breaking a hip.",1
Employee was hospitalized as a result of a fall from approximately 19 feet when a scaffold brace failed and the scaffold collapsed.,1
"A maintenance employee who was clearing snow fell while walking across the driveway.  The employee struck his/her head, requiring an in-patient hospitalization.",1
Employee partially amputated the left tip of his pinky and 1/3 of his ring finger on the left hand while setting up a Flexographic Printer.,1
An employee was hospitalized from injuries he received when he fell off of a ladder.  The employee put an aluminum ladder in the bed of his truck and leaned it against a power line to cut a telephone line.  The employee fell on the concrete area below.,1
"An employee had just finished unloading a shipment of cardboard boxes.  The cardboard boxes were on pallets; the individual pallets and stacks of cardboard boxes were secured with banding straps.  The employee grabbed and pulled on a banding strap on one of the pallets to try and straighten the pallet by a few inches to align with the other pallets.  When the employee pulled on the banding strap, the strap broke and the employee fell to the floor.  The employee broke his left hip.  The employee was hospitalized for hip surgery.",1
"A metal plate fell off of a forklift and hit an employee standing in the area, injuring the employee's foot.",1
"Employees were installing a pump at the facility. During the process, the pump shifted and caught one of the employees fingers, smashing it against the pedestal wall of the pump. Employee was transported to the Memorial Herman Hospital where they determined that the finger had a fracture.",1
"Employee was exiting work vehicle and caught finger in driver-side door, resulting in the amputation of the employee's right middle fingertip.",0
A maintenance employee slipped on ice while applying salt to ice on the ground in the fenced-in yard of the facility.  He slipped and broke his left fibula and dislocated his left ankle.,1
"The employee was working in the bakery pulling a stock cart when the cart caught her in the heel and knocked her shoe off.  The employee tripped over the shoe, causing her to fall on her left hip.",1
"Employee was loading boxes onto a conveyor belt when his glove got caught in the belt. As a result, the employee lost the tip of his left index finger. The worker was taken to a nearby clinic and was then transported to a Reconstructive Orthopedic Center located at 1200 Binz St. Houston, TX 77004.",1
"Employee was loading the cargo hold and started to close the cargo door.  The door snapped back and caught his finger, amputating his right index finger at the first digit.",0
"An employee fell 12 feet to the ground from the top of the top wagon, resulting in a broken left elbow. He was admitted to the hospital for surgery.",1
Employees were making a connection when tubing fell striking the employee in the lower face.,1
Employee inhaled paint fumes and was taken to the hospital.,1
Employee was leaving a private residence where she had provided home health care and slipped on a snow-covered handicap ramp.  Employee was transported to the Hospital of Central Connecticut New Britain Campus where she was admitted and treated for a fractured left ankle.,1
"An employee working off site at a health fair slipped and fell on the ice in the parking lot.  The employee broke the right fibula, leading to an in-patient hospitalization and surgical treatment.",1
An employee's left thumb was cut deeply while operating a meat band saw.,1
"At approximately 3:45 PM on 3/4/15, an employee was operating a pneumatic assembly fixture with two handed controls. The fixture's drive cylinder pinched off the tip of his left ring finger. The cylinder pulled off half the employee's fingernail and tissue, leaving the bone.",0
"On 2/4/15, an employee was standing on a pallet moving stock and tripped, resulting in a broken hip.  ",1
"An employee was inspecting an out-of-service water pipe.  The pipe had accumulated high alkaline water.  The employee received chemical burns to the feet, ankles, and calves.",1
"On February 4, 2015, at approximately 11:15 a.m., an employee working on an upper level of a new medical center construction at 505 Baxter Parkway in Social Circle, Georgia, descended a caged ladder to get something to eat.  The employee fell an estimated 10 or 12 feet to a lower level, suffering a fractured L-1 vertebrae, and was airlifted to the Gwinnett Medical Center in Lawrenceville, Georgia, where he was admitted and scheduled for surgery.",1
"Employee was carrying tar paper on the roof when he slipped on the roof's wet surface and fell from a two-story house, fracturing his lower back.",1
An employee was cutting a branch from a tree using a chain saw. The branch fell striking the employee in the chest and knocking him to the ground injuring his back and chest.,1
"Worker was walking out from the building and was struck on the head by a falling piece of metal that was removed from an upper level window. Worker was taken to Methodist Hospital at 6565 Fanning St. in Houston, Texas, where personnel stitched his head.",1
"Employee was sitting at the kitchen table of a customer's house filling out paperwork when the chair broke underneath him.  The employee fell and hit his neck, suffering a herniated disk in his neck that will require surgery.",1
"An employee missed the step while exiting the ambulance and fell from the ambulance rear door, striking his head.",1
Employee was injured in a motor vehicle accident while traveling from his office to another location for a meeting.  Employee suffered head injuries in the accident and was transported to the emergency room and admitted for continued treatment.,1
"Employee was cutting chicken at his work station on the deboning line. The chicken slipped to the floor, and the employee reached to pick it up with knife still in hand. The employee punctured his eye with the knife while picking the chicken up toward himself and required hospitalization.",1
"On 2/4/15, worker was operating a Trumf press brake when the punch came down on his fingers while he was setting the press up to operate.  Specifically, the worker was placing a polyurethane cover over the die so that the part to be processed would not be damaged. The worker stepped forward on the foot pedal, which activated the press and injured multiple fingers.  The worker was hospitalized following surgery to place pins in the injured fingers.",1
"The employee was unloading a flatbed semi trailer. The forklift operator was removing material from the trailer. The material began shifting on the forks, and the employee moved to avoid being struck. The employee lost his footing and fell off of the trailer, fracturing his pelvis.",1
"Employee was offloading a structural beam in a laydown yard.  When the beam was lowered, it rotated, and the employee's hand was caught between the cribbing and bracing.  As a result, the employee broke his third, fourth, and fifth fingers (metacarpals). The employee was hospitalized later that day.",1
"An employee fell approximately 12 feet from the top of a DOT water tank at the Naval Shipyard on February 2, 2015. The employee had been filling the tank with waste water from a naval vessel. They had just completed the job when it started to rain. The supervisor or team leader asked the victim to climb up and close the top hatch.  The victim fell off, landed head first on the asphalt, and required hospitalization.",1
Employee lost a fingertip when an internal pipe valve was activated. The employee bumped the emergency shut off with his body and the valve shut on his finger.,0
The employee was using a miter saw to cut pieces of aluminum that were to be assembled into prototypes for the organization. His thumb was jerked into the saw and was cut.,0
"An employee unstrapping unit #6 on top of his truck slipped on ice and fell approximately 8 feet, fracturing his elbow.",1
Employee cut off tip of left thumb while preparing arts and crafts materials using a paper cutter.,0
"An employee was taking the bolts out of an 8-inch flange when the 40 lb. flange fell 1 inch onto his left pointer finger, resulting in a laceration. The finger had to be amputated at the knuckle at York Hospital.",0
"Employee was operating a roll mill swedger. He was pushing on a slide bar when he placed his right hand on the moving equipment, severely crushing his middle finger.  He was taken to the hospital where the tip of his right middle finger was amputated at the first joint.",0
"An employee was injured by a utility knife. He was cutting banding on a wood bundle when the knife slipped, and he cut his left forearm.",1
An employee was kept overnight at the hospital for treatment of exposure to 10% nitric oxide that began to leak from a #49 cylinder at the roller table.,1
An employee was installing an underground piping fitting connection with mechanical equipment and received a severe injury when caught between the mechanical fitting equipment and the trench shoring.,1
"On February 5, 2015 an employee working at the Genesis Community Center tripped over a curb in the parking lot suffering a dislocated shoulder.  The employee was hospitalized due to the severity of the injury.",1
An employee severed a finger while working at the lathe machine.,1
"An employee was tightening a bolt on a 16"" pipe flange located 6"" off the floor with a 3/4"" ratchet wrench.  The wrench broke, causing the employee to fall backwards and hit the ground.  Upon falling to the ground, the employee's leg was fractured.",1
 Employee's finger was amputated when caught in spot welder.,0
"An employee #1 operating a picker was struck by the load of a second picker, resulting in multiple leg fractures to employee #1.",1
Employee fell from ladder while painting.,1
Employer reports hospitalization due to an employee tripping on an area rug that was not secured to the floor at Disney Hollywood Studios-Tower of Terror.,1
A federal prison inmate was cleaning the floor with compressed air when the inmate tripped on a metal frame and fell resulting in a broken right forearm. The inmate was admitted to the hospital.,1
An employee at a remote Marathon Oil jobsite was pressure testing pipe when he was struck-by 9500psi of water when bolts broke on the flange connecting two pipes causing the high pressure water to strike the employee and one other sub-contractor's employee who were standing approximately 15 feet away.,1
"An employee fell from a beam he was standing on, down to a catwalk below, when he was removing rust from another beam. The employee sustained neck and back injuries.",1
"Employee was taking papers out to a truck driver. She left the office through the south office door. Walking to the truck, she slipped on ice in the parking lot and fell. She landed on her left hip, striking the ground. She injured her left hip and possibly her back. She was transported to Mercy Hospital in Springfield, Missouri, where she was admitted.",1
An employee suffered an amputation of the tip of his right ring finger while adjusting the platen on the 7202 printing press.,0
An employee passed out and was found unconscious. The employee regained consciousness and was found to have a gash near the right temple. Blood was observed on a parts cart and the floor where the employee was first found. EMS responded and took the employee to Doctor's West Hospital. A cat scan was performed and the employee was found to have minor internal brain bleeding. The employee was taken to Grant Hospital for further tests.,1
"Incident occurred right outside the test bay in the Conroe Facility.  Employees were working on a pump unit skid simultaneously. The lead man and assembly technician were working on the control panel. The injured employee was laying on the left side between the radiator housing assembly and the fan belt assembly. Injured employee reached up to grab and hold the wrench (to ""hold backstop"") at the same time that the assembly technician hooked up the airline from the start exhaust to the throttle exhaust. As soon as the engine started (by plugging in the airline), the injured employee jerked his left arm back. The motion caused the injured employee's right arm to move up. The sleeve of his shirt was caught by the fan belt. When he went to pull away from the fan belt, his hand got caught in the fan belt. The fan belt ran his hand through the pulley, causing partial amputation of his right ring finger, an abrasion to his middle finger, and bruising/abrasion to his right arm.",0
An employee fractured his hip when he was walking across a pad to the chicken coops and slipped on ice beneath snow and fell.  He was admitted to the hospital and may need surgery.,1
An employee was troubleshooting the installation of a tool (XT1000 - used in wafer semi conductor manufacture) when a door would not open. The employee tried to manipulate the door resulting in a right thumb tip amputation.,0
"Employee stepped on something (possibly a plastic cap used for shipping) and fell on her hip. She was admitted to Capital Region in Jefferson City, Missouri with a broken hip.",1
On 2/5/15 an employee acting as part of a rapid response healthcare team was transferring a patient from the inpatient bed to a cart when the employee incurred a back strain. The employee was admitted and hospitalized for 3 days.,1
"An employee was climbing off a trailer using the trailer ladder when he lost his grip and fell 8 to 10 feet.  He broke his left leg, left ankle, and right knee in the fall.",1
"A worker had both hands amputated by a rotating auger while cleaning Mixer 1, in Tunnel 1, on the raw production side of the plant.",1
Employee was attempting to pull a ladder out of a manhole at a sewer lift station. The manhole hatch cover fell on the employee and knocked him down the hole. Employee fell approximately 20 feet to the ground below.,1
An employee was working on the center mac of the radial truck curing machine when he sustained 3rd degree burns to approximately 11 to 14% of the left side of his body.,1
"Employee noticed that the cargo door of his assigned Long Life Vehicle snapped while unloading mail. He placed flat tubs (plastic containers that are used to carry mail) under the broken cargo door to hold the door up as he was unloading mail when he either hit the tub or the tub flipped out, causing the door to fall on his right hand. He severed his middle fingertip.",0
"On or about February 5, 2015, an employee fell approximately 12 feet from an elevator pit ladder. The employee fractured his left leg and injured his back and right ankle. ",1
"Employee was lowering trash from the edge of the flat roof he was working on. He fell 11 feet 8 inches when the soffit he was standing on collapsed. He broke ribs, shattered an elbow, and cracked his pelvis.",1
"A helper began raising the powered dock plate. While the dock plate was in motion, the injured employee walked onto it and shut the trailer door. He slipped, and got his legs stuck between the dock plate and the back of trailer. While he pulled up on the plate to get if off his legs, he told the helper to pull the truck out to free him.  When the truck was pulled forward, the plate snapped downward and severed the ends of the helper's left index and middle fingers.",1
Electrician working at a client site tripped on an electrical cord and hit his head. Employee was admitted to the hospital due to brain hemorrhaging.,1
An employee received an amputation to the left middle finger while using the patty machine within the meat department.,0
Employee slipped on ice in the parking garage and fell injuring a leg.,1
"Employee discharged a nail gun. A nail became lodged in the left lower leg, requiring surgery to remove.",1
Employee crushed finger while making gowns on machine #25. Glue had gotten on the material and the employee was sprinkling powder onto the glue.  One finger was crushed and others were cut.,1
A home healthcare/personal care attendant was taking out the trash and tripped and fell due to an uneven driveway resulting in fractures that required hospitalization.,1
Employee was walking to work when he slipped on ice bruising his right hip.,1
"An employee was working on an offshore barge and fell while trying to connect a hook to a lowered boom of a crane. The employee braced his fall with his hands, fracturing his right wrist. The employee was taken to the hospital by helicopter to receive treatment. A cast was placed on the employee's right wrist and he was kept overnight for observation.",1
"On or about February 6, 2015 at 12:00pm, an employee's finger was caught in between two collars on a pipe while assisting in the lay down of 3 1/2"" tubing coming out of the oil head.",0
"At the end of her shift, the worker slipped on a patch of ice in the driveway. She fell, broke her ankle, and was hospitalized.",1
"An employee was moving the forks of a forklift closer together, slightly raising the fork. He slipped as he began to push the fork, pinching the tip of his right middle finger between the fork and the forklift mast.",0
"An employee slipped on ice, resulting in a broken hip.",1
Employee slipped on an icy surface and fell. ,1
Employee dislocated his right ankle while stepping off of a rail car. Employee was sent to the hospital where they admitted him because his ankle kept popping out of place after they set it. They had to perform surgery on the ankle. ,1
A maintenance employee suffered an injury to the right hand during maintenance operations of a wire cabling machine.  The employee lost the ring and pinky finger on his right hand.,0
Employee was using a crane to pick up windows weighing 250 pounds. Employee's fingertip got caught between a window and a shipping container. Employee suffered an amputation from the first knuckle (tip) of the pointer finger.,1
"The worker was attempting to straighten a load of pallets that the forklift operator was placing on the delivery truck. The worker fell off the top of the pallets, hurting his back and breaking several bones.",1
"An employee of Hebron Inc. delivered scrap cars to a salvage yard.  While unstrapping the restraints, at least two car logs dislodged from the scrap pile and rolled/slid, pinning the employee between the trailer and the car logs. The employee was hospitalized for injuries that included internal bleeding.",1
An employee fell while walking in the employee entrance and hit face on the wall.  The employee was hospitalized.,1
"Employee was climbing down from the fixed ladder of a grain truck after adjusting a spout. The ladder broke, and he fell 5 feet and broke his pelvis.",1
"An employee was delivering a cylinder of gas to a customer.  The cylinder was being moved with a cylinder cart.  As the employee was walking the cart and cylinder to the customer's door, he slipped in the snow.  His hand got caught between the cylinder and the concrete parking lot.  The employee crushed the tips of his index and middle finger on his right hand.  In-patient hospitalization was required for surgery on the fingers.",1
An employee received a partial right thumb amputation while strapping lumber on the dry chain.,0
The employee was cleaning the windshield of a semi-truck with the hood of the truck open.  He finished cleaning the windshield and went to step down when his wedding ring caught on the hood.  The weight of the employee's body and the ring being caught on the hood caused the hood to cut the employee's finger.  The finger was later amputated at the hospital.,1
"An employee was polishing a shaft on a lathe  with an emry cloth when his hand became caught, pulling him into the lathe and injuring his right hand. He fractured the ring and pinky fingers on his right hand and sustained damage to the flesh as well.  His right pinky finger was amputated due to the damage.",0
"On or about 2/6/2015, a temporary employee was moving a roll of paper to place it on a corner board machine.  The roll of paper fell, striking him in the left leg.  As a result of the employee's injury, he was hospitalized for more than 24 hours.",1
"Worker was repairing an overhead door roller located in the shop. He set up an extension ladder against the wall of the building and climbed up. After he made the repair using his hands, he fell while descending the ladder. He landed on a water pump that was below and sustained multiple injuries to the right side of his body, including his right arm, knee cap, ribs, and cheek.  He also sustained a cranial injury due to the fall and suffered a concussion.",1
"On or about 2/05/2015 at approximately 10:15 a.m., an employee was delivering merchandise to a customer. When the employee was placing a case of bottled soda on the hand truck, a couple of glass bottles fell to the ground and the employee was struck with glass fragments in his left eye. The employee was hospitalized overnight for glass extraction.",1
"Employee was walking in an open area when a forklift weighing 26,000 pounds struck his right lower leg and rolled over the leg.",1
"Employee was preparing his truck to do electrical work on a pole. When he turned around, he missed the stairs and fell to the ground. ",1
An employee suffered a severe injury to his right-hand ring finger while installing a belt on the number 7 dust collector.,0
"Employee was clearing a jam on a hydraulic press. During the process, the hydraulic system activated, and the ram caught the employee's right wrist and pinched it against the inner frame. The employee fractured his right wrist.",1
"Employee stepped on a metal pin, puncturing the right foot.",1
An employee injured his back when he slipped on wet/icy ground and fell  getting into his work truck.,1
"Employee was sprayed with hot water while cleaning an inductor (a piece of filling equipment used to fill the containers of personal care products). The nozzle of the hose came loose and splashed the employee with the hot water, causing burns to the skin.",1
An employee was running the pneumatic press when the part that he was working shifted.  The space bar that he was using struck him in the head.,1
"An employee was in a tree approximately 32 feet in the air, when he slipped and the chainsaw he was using cut his left forearm.",1
An employee was injured while working alongside the FLA Turnpike. The employee was working behind road barriers and was struck by a piece of flying metal debris that came off a motor vehicle that was passing by the worksite.,1
"Employee was feeding a 6 by 8 ten gauge metal into a roller machine. The roller caught his gloved left hand and pulled it in, cutting off his left index finger and peeling the skin off the middle finger.",0
"On or about 2/6/15 at approximately 3:25 p.m., a worker was operating metal roller equipment. The worker turned on the switch and began feeding the sheet metal into the roller. Once a piece of sheet metal is placed into the rollers the machine begins the process of rolling the sheet metal into a cylinder form. The worker then began feeding another piece of metal through the rollers. At the same time, he reached over and removed the previously formed cylinder. The worker's glove was caught by the roller, which pulled his hand into the machine. The machine crushed his right hand.",1
An employee fell and struck a mail sorting basket. The employee was hospitalized and treated for a collapsed lung.,1
An employee received second and third degree burns to his left foot when he stepped into a pan full of hot oil.,1
"An employee was working on a twister machine, removing a package of yarn.  The yarn fell into the shaft and pulled her finger into the shaft, amputating the fingertip.",0
Employee was performing maintenance on the Sweed machine.  He opened the machine before turning it off and his hand became caught in the gears.,1
Employee dragged her foot on the carpet and it caused her to fall.,1
An employee was hospitalized with a broken foot due to a forklift tipping over.,1
"The employee was in a personnel lift and the crane it was attached to was lifting it to another area of the ship. As it was moving, the employee put his hand out to move the basket from the ship and his finger was caught.",0
Employee slipped on ice and broke her leg above the ankle.,1
Employee was mixing baking dough when the batch of dough came out of the mixer striking the employee in the abdomen. Employee finished shift after being struck and went home for the night. Employee was experiencing abdominal pain and went to the hospital the following morning at approximately 2am. Employee was admitted for internal abdominal bleeding.,1
An employee had his left thumb crushed by the wheels of a semi trailer as he tried to avoid being run over. The employee was knocked to the ground and pulled into the wheel well of the trailer crushing his left hand and amputating his thumb. The employee also sustained injuries to the lower left side of his body.,1
"Employee was mopping up spills and went to get a wet floor warning sign. He slipped on 2/7/15 at 1:13 AM, injuring his left hip.",1
"Employee walking to front entrance slipped and fell, bruising vertebrae, resulting in hospital admission.",1
An employee was using a propane floor stripper. The employee started feeling ill and went to the hospital. Blood tests showed elevated carbon monoxide levels.,1
"Worker left the bone saw running while getting more boxes of meat to cut. The blade caught his coat, pulled him in, and severed his right forearm. He was taken to UF Health Hospital in Gainesville, Florida to re-attach his forearm.",1
"Employee was helping to troubleshoot an air valve.  While trying to isolate the valve, the valve closed, resulting in partial amputation of his left middle finger.",0
A material handler employee's foot was run over by a large aluminum air craft container.,1
"Employee tripped on luggage in the doorway of a guest room, impacting with the floor, and hurting the left shoulder.",1
"An employee was carrying a bucket of cleaning liquid through the facility when he tripped and fell. The impact allowed a splash of cleaner to make contact with his eyes, exposing them to corrosive chemicals.",1
"A Walmart employee was using a tire balancing machine in the Tire Lube Express Area.  The machine was spinning a tire to balance. The employee reached in to flip the tire over to balance it and the tire slipped.  The employee tried to grab the tire, but it slipped and his hand was pulled into the machine.  The machine was still spinning at a high rate of speed. His hand got caught on the tire mount and rim.  His forefinger (ring finger) was amputated at the tip of finger and his middle finger was severely damaged.  He was taken to the hospital and admitted.",0
Employee sustained a broken rib while lifting a box at the facility. Employee was hospitalized.,1
Employee slipped on the ice leaving a client's home and broke her left ankle.,1
"Employee was cutting bands from a group of slit coils.  The coils were on the turnstile arm.  They were not in a static position. When the last piece was cut, it fell off the turnstile and hit the employee.  The piece was approximately 60 inches long and weighed 2000 pounds.",1
Employee stepped off of excavation equipment and broke his knee.,1
"Employee was pushing a tall, tin cart filled with dishes off the truck lift gate to the dock. An employee was on the loading dock helping maneuver the carts.  As the cart was pushed from the lift gate to the dock, it tipped forward and fell on the employee crushing his shins/feet.  He is currently in the hospital.",1
An employee was injured while operating a pallet jack in the store sort area of the warehouse. The employee's leg became caught between the pallet jack she was operating and other equipment. The employee was hospitalized.,1
"On February 9, 2015, an employee slipped and fell while delivering mail at a residential home.",1
"On 2/9/2015 at approximately 7:15 pm, an employee amputated the left middle finger (1st joint) with a belt and pulley on a wire bagging machine.",0
"An employee suffered an amputation to the first knuckle of the left pinky finger, while attempting to clear a jam in a molding machine.",0
An employee was injured by forklift extensions when lifting a load of sheet metal.,1
"Employee was operating a chop saw. Employee was clearing the trimmings from the point of operation. While he had his hand in the point of operation, the saw activated and the blade came up, amputating his right hand. The employee was taken to the hospital for re-attachment surgery.",1
Employee cut the tip of his finger with a knife when he was opening the plastic of a pallet.  He sustained a laceration to the middle finger on his right hand.,0
An employee slipped on a wet floor in the breakroom and fell sustaining a head injury and was hospitalized on 2/10/2015.,1
"An employee was injured and hospitalized after stepping into a containment dike sump area.  The containment area is approximately 18 inches deep and is siphoned out of the sump with a steam siphon.  At the time of the incident, the siphon was plugged in, which resulted in steam being diverted back into the sump and the water being heated.  The employee was burned from about his left knee to his left foot.",1
"Employee slipped on ice on the open grate steps by the wastewater facility. The employee's leg broke, and the employee required in-patient hospitalization and surgery.",1
"An employee was working with the injection mold machine when a plastic part got stuck and his arm got caught in the machine.  The mold closed on his hand/arm, resulting in crushing injuries to his hand and lower arm.",1
"Employee fell from a tractor trailer while offloading vehicles. Employee injured right shoulder, right side of head, and right ribs.",1
"On 2/9/15, an employee who works for National L.S. Inc. was at a HEB Distribution Center in Houston, Texas.  The employee was about to begin his shift (6:30 am) to unload a truck for the distribution center.  At the time of the accident, the employee  was standing at the side of a Barrett double pallet jack trying to move the machine.  The machine was on and struck the employee, pinning him between the Barrett double pallet jack and another pallet jack next to the area.  The employee sustained a fractured pelvis.  The employee was hospitalized.",1
"Employee was struck by a 12-inch pipe while it was being lowered into a three-foot deep trench, breaking his leg in two places above the ankle.",1
"Worker was conducting re-roofing work on a two-story, split-level home without his personal fall protective equipment. He slipped, fell 10 feet to the ground, and hurt his tail bone.",1
Two employees were struck by a copper pipe when they went into a storage room to retrieve pipe. Employee #1 was treated for bruising and released; employee #2 was admitted for monitoring.,1
Employee was walking to car when leaving work and slipped and fell on ice in company parking lot. Employee suffered a broken leg.,1
"On or about Monday, February 9, 2015, at 2:45 pm an employee was changing a transformer in a Merit Energy oil rig when he touched a hot wire injuring his head and left hand.",1
Employee was struck and run over by a tractor trailer truck.,1
Employee was reconnecting the battery on the forklift when he pinched his left pinky finger.,1
"An employee was unloading decorative tile from a truck.  The employee slipped and fell backwards, striking his head on concrete.  The employee was transported to the hospital and admitted due to losing consciousness.",1
An employee received third degree burns on his back while using a plasma cutter to repair a trailer.,1
One employee was injured when he was caught between the mast and body of a forklift.,1
The employee was installing a gear box at the Diedeshiem machine tool station (used in cutting metals for making toilet valves). The employee was using a hydraulic jack to align the gear box on the motor of the machine. His hand got stuck between the gear box disc and the motor case. His left hand pinky finger was amputated and his ring finger was also injured.,0
Employee slipped on the water on the floor and fell resulting in pain in the right leg and left wrist. She was admitted to the hospital for surgery.,1
Employee fell while rolling a saw blade from the mill to the sharpening shed.,1
Employee was hospitalized after sustaining a laceration to the left wrist while using a saw.,1
An employee was removing a hand temper (compaction for dirt) out of a dump truck by lifting it with a backhoe bucket. His left ring finger was pinched between the tailgate of the dump truck and the hand temper when he grabbed the hand temper as it slipped and fell off the bucket. The employee suffered some bone loss (no amputation) and incurred 100 stiches.,1
Employee fell on ice in the parking lot and was hospitalized with a fractured ankle.,1
Employee was operating a wrap machine that wraps noodles in the production line.  Employee was running the film through and re-threading the film through the machine.  Employee had machine on manual cycle ( 1 bag every 5 seconds). His hand came in contact with the end sealer ripping his fingernail off.,0
Employee suffered amputation of the left index finger while operating a core machine.,1
An employee was injured while mounting a small tire.  The rim split and the tire struck the employee. The employee received lacerations to his face and fractures to his right wrist.  He was transported to Morristown Hospital and admitted for treatment. ,1
Employee slipped and fell on the icy yard.,1
"Employee was flushing radiator on a truck and when he started to loosen the radiator hose it blew off spraying the employee with hot water.  The employee suffered second degree burns on his right arm and right side.  Accident happened on 2/10/15, but the employee was not admitted to the hospital until 2/11/15.",1
An employee sustained a partial finger amputation after sticking a hand in a snow blower.,1
"Employee was installing a TIW valve assembly for Blow Out Preventive (BOP) testing to get a pressure reading from the pipe. During the BOP process, the TIW assembly was sitting on top of the pipe when the pipe fell and struck the employee in the left foot causing lacerations.  Employee was Medevac'd to hospital to receive sutures in left foot and was kept overnight for observation.",1
An employee was hospitalized for a wrist injury after slipping on a floor that she was mopping.  Employee had surgery on her wrist.,1
Employee received an electrical shock to the right arm and right side of his body while leaning on a pole by the time clock inside the facility's sewing department.,1
"Employee was working in the Wets Tool Area which has hydrofluoric acid (HF) in the wafer and tool area.  The employee was exposed to HF and was sent to the Burn Unit in Lehigh Valley Hospital in Allentown, PA.  The employee is scheduled for skin graft surgery.",1
"At a delivery site branch, employee was unloading an 18-wheeler truck of milk into a delivery truck. The two trucks were parked next to each other and a ramp was landed between the two trucks' side doors. The employee was using the ramp to cross from one truck to another. While the employee was still standing on the ramp, the ramp fell from its holding place. The fall was approximately 4 feet. The employee was still standing when the ramp fell with him on it; however, after landing on the ground, the employee collapsed. Both of the employee's ankles were broken.  The employee was taken to the hospital and admitted.",1
An employee was cleaning a lap machine when the rag that he was using got caught in the rotation wheel.  The rag pulled his right hand and he lost the top of his right middle finger.,0
An employee's right forefinger was amputated at the tip when he got his hand pinched between two pieces of metal.,0
"An employee was operating a hand-held grinder when it kicked back and caused a severe laceration on the side of his face and a possible eye injury. The employee was admitted to Allegheny General Hospital in Pittsburgh, Pennsylvania, due to his injuries.",1
Employee suffered injury to his middle right finger when his hand got caught under a metal slide. He was admitted to the hospital overnight.,1
"On or about 2/10/15, a worker fell from a stainless steel tank to the ground, approximately 9 feet below, and sustained multiple rib fractures.  He was hospitalized overnight.",1
Employee was hospitalized after the circular saw he was using slipped and cut his left thigh.,1
"On February 10, 2015, an employee working in a classroom area stepped on toys. The employee fell and broke an arm resulting in hospitalization and surgery.",1
"An employee was walking from his truck to the terminal during inclement weather and fell on ice, hitting his head. The employee was taken to the hospital and admitted.",1
"Employee was maneuvering a piece of raw steel to drain residual coolant from the tube. The employee lost control of the material, causing his finger to get pinched between the material and rollers.",0
"On February 10, 2015 at 9:30pm a truck driver fell off the back of a truck's lift gate and was hospitalized overnight.",1
An employee's left pinky was amputated after his hand was caught between a roller and a tank.,0
An employee received burns to her leg after coming into contact with hot ash.,1
Worker on the unwind end of the extruder was attempting to remove some material that was wrapped around a roller.  He reached over and under the guard without disengaging the rollers.  His left thumb was caught between the two rollers and he was degloved from the first knuckle.,1
"While deconstructing a locomotive engine, an employee was struck by a piece of engine, which broke the employee's leg.",1
Employee slipped and fell during a photo shoot and fractured the right elbow.,1
An employee was hospitalized when she complained of throat irritation and shortness of breath after entering a janitorial closet.,1
"An employee suffered a ruptured ear drum and a fractured cheekbone after being struck in the head by a below-the-hook lifting device while changing a forklift battery on February 10, 2015.",1
Employee was working on the No. 2 sew line machine when a paper jam occurred. The employee went around the machine guard and caught his right hand in a pinch point amputating his pinky finger. He was taken to Jefferson Regional Medical Center.,1
"Employee in the HVAC maintenance department was lifting filter boxes.  At some point, the employee's back became tight and the employee laid down to stretch it out.  Employee was unable to get back up.  An ambulance was called and the employee was transported to the hospital and held overnight.",1
"The injured worker was leaving the engine room and going up the ship's ladder carrying a small Shop-Vac.  He was six to eight rungs above the deck when he fell (approximately 6 feet).  While falling, he caught his finger between the vacuum and some metal part of the ship. He sustained a right middle finger avulsion (amputation) injury from the first knuckle through the nail, as well as a right index finger 90% avulsion (amputation) injury (estimated first knuckle).",0
"An employee in the yard at the Bartonville, Illinois, location was exposed to a fall from a stationary vehicle when cleaning a mirror on a semi-trailer truck.",1
An employee received second degree burns on the left hand while attempting to free an obstruction in an injection molding machine.,1
"Employee lost his footing and fell into a 3-feet, 10-inches excavation, causing injuries that resulted in hospitalization.",1
"Worker was using a wire forming machine to manufacture zippers when he tripped over a safety chain and fell, injuring his right shoulder and resulting in an in-patient hospitalization.",1
An employee was sitting on a conveyor when the manufactured piece struck and pinched him.  The employee was hospitalized with five fractured ribs.,1
The injured employee was in the process of spraying a tacky solution onto the conveyor belt of a dump truck when his arm got caught and he received skin burns/abrasions on his left forearm and left hand. He was admitted to the hospital and had an incision to relieve the swelling.,1
Employee entered the stock room and tripped over a folded chair.  She suffered a fractured left elbow.,1
An employee slipped on the ice in the parking lot and is hospitalized for a possible broken tailbone.,1
"Employee was exiting his tractor trailer cab and fell to the ground, breaking 5 ribs and bruising the spleen.",1
"On 2/11/15, a Pioneer Oil Field Services Rig Hand working at Petco/Louden Field amputated the first digit (approximately the length of his fingernail) of his right ring finger.  The amputation occurred when a landing joint connector being pulled by a chain became tight and wrapped around said employee's finger who was holding/guiding the chain at the time of incident.",0
An independent contractor was using a table saw in the scene shop to cut wood for set construction. His left hand slipped into the saw blade and amputated the tip of his left index finger.,0
An employee operating a 4-wheeler broke his leg after it turned over on him.  The employee broke two bones and had pins placed.,1
"An employee of SM Fencing & Energy Services, Inc. lost his eye sight after receiving a head injury. The employee slipped on the ice at the project site while carrying a railroad tie. After the employee fell to the ground, the railroad tie fell on his head.",1
A worker in a training program was shot while at a job site shoveling snow.,1
"On 11 February 2015, at approximately 8:40, an employee working at the Norfolk International Terminal was changing tires to a straddle carrier when one of the tires fell from the standing position and fractured the employee's left leg.",1
Employee fell 15 feet from a concrete form and broke his pelvis.,1
"Employee was delivering mail. When walking from one delivery point to the next, the employee tripped and fell to the ground. The employee was hospitalized due to a lacerated spleen.",1
An employee was hospitalized with cellulitis after repeatedly handling 30-pound furnace rollers.,1
An employee was injured when he entered into the stacker conveyor belt area.  The employee's legs were crushed by moving equipment.,1
"An employee jumped from the catwalk (approximately 30 feet from the floor) and suffered injuries to his spleen, kidney, and vertebrae.",1
An employee was taken to a local hospital after suffering a broken leg during snow removal operations.,1
Employee climbing a pole fell approximately 15 feet suffering a broken right leg and was hospitalized.,1
" A worker was washing a feed truck at the end of work shift. As he stood on the truck, his foot slipped and went into the running chain that helps move the feed.",1
"An employee lost balance while walking through the warehouse, hit a rolling cart and fell to the ground.",1
"An employee was lifting a metal bar out of the bar sander using an overhead gantry crane. While operating the crane, the employee got pinned around the abdomen between the metal bar and a handrail system and was injured.",1
"Employee was preparing a trailer for welding. The trailer slipped from the jig, falling on the employee's leg. Employee suffered a broken leg and was taken to the hospital.",1
"Employee was using a pressure washer when the nozzle became clogged.  Employee turned off the machine to change the nozzle, but did not release the stored pressure from the wand.  The nozzle blew off, injecting water into his left middle finger.",1
Employee lacerated two fingers from his right hand with the tension wheel of an automatic bending machine while replacing a bending reel.,1
An employee pinched a finger when standing up a steel drum. Soft tissue was torn from the finger tip with no bone loss.,1
"An employee was descending a dump truck ladder, when he jumped to the floor and his ring was caught. He lost part of his left-hand ring finger, from the mid-knuckle up.",0
Employee was returning from break to the Quality Control Room and was walking around the corner. She caught her toe on a protruding corner of a baseplate of the guardrail and fell. The employee fractured her hip.,1
Employee was injured while operating an electrical jack. He pinned his leg against the wall.,1
Employee fell from second rung of ladder while drilling in screw.,1
"On or about 2/1/2015, an employee was operating a stand-up lift truck.  His foot slipped off the back of the lift truck and was caught between the back of the lift truck and a wooden crate.  The employee was trying to lift his foot off the brake pedal to stop the lift truck but did not completely do so.  The employee suffered a broken left foot.",1
A worker slipped on ice and fractured his ankle. The injury required surgery and admission to the hospital.,1
An employee slipped and fell on ice after washing off oil and grease from a pump the employee had recently pulled out of a process pit. The employee sustained a fractured ankle that required surgery.,1
An employee's pinky finger was crushed beneath an air pallet being used to move a semi trailer.,1
"On or about February 11, 2015 at 3:20pm an employee suffered a broken left shoulder and hurt his left leg while working in the Press Area. He was caught in between the bag and a cotton bale while trying to put on a bag. The machine turned on automatically and pushed the cotton into the bag.",1
"On or about 2/11/2015 at approximately 2:30 p.m., an employee fell approximately 7 feet from a landing gear dock (working stand) to the ground while performing maintenance work on an aircraft.   The employee injured his right shoulder, broke his right middle finger, and was hospitalized.",1
Employee was relocating cars and while walking from one side of the car to the other fell to his side and broke his hip.,1
Employee cleaning rail cars attempted to close the rail car door. He amputated right-hand digits (ring and pinky fingers) in the process.,1
"Employee #1 was working on the belt of the cryovac machine. Employee #2 was working on something different on the same machine. Employee #2 jogged the machine, which caught employee #1's ankle and caused a fracture. He was admitted to the hospital.",1
A worker was struck and injured when a discharge hose disconnected from the pump.,1
The employee was standing on the ledge of a barge and fell into an opening.,1
An employee was climbing down a portable ladder after working on the HVAC system and the ladder was struck by an aerial lift that was passing by the work area. The employee fell and broke his right ankle. ,1
"Employee was hospitalized when he jumped off of a ladder, injuring his ankle and tibia.",1
"An employee tripped and fell to the ground.  The employee landed on his knees in a pile of hot petroleum coke.  The employee sustained burns on both legs from the coke, and possibly the hot steam.  The employee was taken by ambulance to Christiana Hospital, and later transferred to Crozer-Chester Medical Center in Chester, Pennsylvania.  The employee sustained 2nd degree burns on his legs, and 3rd degree burns on his ankles.",1
"At or about 3:00 pm on February 11, 2015, an employee was using a chainsaw to cut a tree down, when the tree twisted and fell, pinning him to the ground.",1
"An employee slipped on a wet floor while walking between the kitchen and service area.  The employee broke the right ankle, was hospitalized, and is undergoing surgery.",1
"A machine operator was using a grease gun to apply lubricant to the shovel area of the excavator. The Shovel was situated on the ground, and very close to the edge of an 8 foot drop on a pile of material. The employee lost his footing, fell down the 8 foot drop, and struck his head on a concrete object resulting in multiple broken ribs and a head injury.",1
Employee suffered a puncture to his right ring finger from a thorn on a tree he was cutting down.  The injury later resulted in the employee's hospitalization.,1
"On or about 2/12/2015, an employee working for Ingram Barge Company at 78 Riverside Drive in Columbus, Kentucky, was hospitalized for burns to his left side, from his armpit to his waist.  The burns resulted when a spark from welding underneath a barge on the dry dock went under his leather welding jacket and caught his shirt on fire.",1
"On or about February 12, 2015, an employee was walking to his/her vehicle and fell, resulting in a fractured ankle.",1
Employee had thumb pinched between a torque wrench and bolt. The employee was hospitalized due to a fractured thumb.,1
Employee was standing on two milk crates to secure the sides of a temporary sales tent in a parking lot and slipped and fell causing upper back and neck injuries.,1
An employee was hospitalized due to a fall off a ladder resulting in injuries to the head and eyes.,1
Employee was changing out a hydraulic ram on a rig when a swivel on the come-along broke and pinched the employee's thumb. First aid was performed at the local hospital and then the employee was transported to Denver. An artery in the thumb was damaged and the right hand thumb was later amputated at the first joint.,0
Employee slipped and fell 3 feet off the back of a delivery truck.,1
"Employee was changing a wheel on an ice cream dipping cabinet, which was turned on its side. The cabinet was on a dolly while the employee was working on it. The cabinet slipped or shifted and crushed/smashed the employee's finger, causing a laceration. Employee was taken to the hospital for treatment and was kept overnight for further observation.",1
"Employee suffered serious laceration to the finger from ""biscuit"" cutting machine.",1
"The employee was working from an extension ladder. The ladder kicked from under his legs, causing him to fall onto a concrete slab.",1
Employee caught hand in system.,1
"Employee had leg pinned between AGV-ATL #35 and #37  (Automated Guide Vehicle - Automated Truck Loader), resulting in a left leg compound fracture.",1
"Employee  was at a different employer's facility walking down from an office in the upper floor when she fell from a staircase. She received a laceration to her head, bruised right shoulder and loss of consciousness. The employee was transported and admitted to the hospital.",1
"An employee was walking around a corner and stepped in front of a forklift. When the forklift operator attempted to stop, the 800 lb. coil carried by the forklift struck the employee in the leg. The employee sustained a broken leg and tendon damage as a result of the incident.",1
Employee was using a ladder to get parts from a shelf when he slipped and fell a few feet to the floor. He broke his left leg and was hospitalized.,1
"In the Forum Circle Drive, an employee fell onto the concrete street and sustained injury to their head and a fractured right arm.",1
"On or about February 12, 2015, a worker was trying to light the heater treater In The Barriers Well, but the gas valve was not fully shut causing the gas to flash in his face. The Well was shut in and the worker was trying to get it back online. The worker sustained injuries to his face and right hand.",1
"Employee was pumping emulsified turkey meat up a tube to a dryer unit. The system became clogged. When he disconnected the tube from the pump, he found the tube clear and stuck his finger in the opening to the pump, which was still running, resulting in an amputation.",0
"On or about February 12, 2015, an employee slipped on ice/gravel while walking in the company's job yard resulting in a broken leg.",1
Employee was hospitalized after his right leg was run over by a company truck as he was troubleshooting the braking system.,1
"A small crew of workers was working under reactor prefitting beams. They had the beams rigged with a come-along. After getting it into place, they lost control of the rigging and one of the beams fell on the ground and landed on the worker's foot.",1
An employee fell from the top of a semi trailer while loading product into the hatch.,1
Employee's foot was run over by another employee who was backing up a forklift.,1
Employee was caught by a machine when reaching for wire inside. Employee was hospitalized and required surgery.,1
"Four employees were attempting to unload a pool heater from a truck. In the process of moving or repositioning the heater, which was on top of a pallet, to the truck's lift gate, one employee got his left pinky finger pinched between the pallet and the heater. The employees were repositioning the pallet so that they could use the pallet jack to move the pallet to the lift gate.",1
Employee broke a leg at a construction yard.,1
"On or about February 13, 2015, an employee amputated the tips of 2 fingers on the right hand while attempting to remove a jam in the packaging machine.",0
An employee put a valve into the hole of an oil well as part of the process to plug the well. Pressure built up behind the valve causing it to explode out of the hole. One of the employee's legs was severely injured and is being medically amputated. ,1
"Employee slipped on a wet floor and grabbed onto a fryer to stop himself from falling.  When doing so, his arm went into the fryer and he sustained severe burns to his right arm.",1
Employee was hospitalized overnight for slip/trip/fall at a construction site.,1
An employee amputated the right hand middle finger while operating the blister card machine.,0
"Employee was elevated approximately 12 ft. on a Crown High Level Order Picker removing items from a shelf when she stepped backwards and fell to the concrete surface below.  Employee was donned in a harness, but did not have it attached and secured.  Employee sustained a compound fracture to her right ankle and a cracked heel.",1
"An employee was hospitalized on 02/13/2015, after a slip and fall on ice that fractured his left hip.",1
Employer reported the partial amputation of an employee's third and fourth digit on the right foot following an accident involving a forklift.,1
"Employees were using an overhead crane to lift a rail car. While rigging the chains to the rail car, the hook caught a grab iron, amputating three fingers on the employee's left hand.",0
"Employee crushed finger in door and suffered a partial amputation, from the open tip to the nail bed.",0
Employee was buffing floor using a propane buffer when the employee experienced upper respiratory discomfort because of fumes caused by the buffer.,1
"A key came out of a shaft on the conveyor. The injured employee shut down the number 2 line, removed the guard to access the key, replaced the key, reinstalled the guard, and started the machine. He noticed the conveyor making a noise. He then removed the guard with the system running and determined a need to put grease on the chain. With a gloved right hand, he applied grease to the chain with his right index finger. His finger got pinched between the sprocket and the chain.",1
"On February 16, 2015, an employee was unloading a truck. He fell off the back of the truck when the material he was unloading shifted and pushed him off. The employee broke his right ankle in the fall.",1
An employee was operating an automatic cutoff saw and suffered an amputation of the tip of the right middle finger above the nail bed.,0
Employee was moving a cart of pizza dough. The cart tipped over and pinned the employee's thumb between the handle and floor. The employee required surgery.,1
An employee was installing blinds when he fell off of a ladder and injured his back and shoulder.,1
"After delivering a package to a private residence, an employee suffered a compound fracture to the lower left leg after tripping on a landscaping rock and falling to the concrete driveway.",1
Employee tripped and fell in a walkway while retrieving an order of corrugated shipping cartons that were lying on a pallet.,1
"During a work break at 9:20 AM on February 13, 2015, an employee was walking behind the building to his car in the parking lot and slipped on an ice patch. The employee sustained compressed fractures of the T2 and T5 cervical discs.",1
A worker fell in the bathroom and was hospitalized overnight due to injuries sustained.,1
The tip of the employee's right index finger was amputated when it was caught between the fabric and the rollers of the doffing machine.,0
"Employee slipped on ice outside while preforming work duties, causing injury to the right knee and hip.",1
"Employee was hospitalized on 2/14/2015, when he tripped on a metal cart and fell in the dish pit.  He fell face forward, hitting his face, lip, head and both shoulders which were dislocated.",1
Employee struck his head on a door jamb and sustained a concussion.,1
"An employee was cutting a metal plate with a cutting torch.  The plate fell, crushing the employee's arm.  The employee was hospitalized.",1
Employee was hospitalized after a slip and fall that resulted in a broken hip.,1
"On February 16, 2015, employee walking on flat level ground collapsed and broke his hip.",1
Employee was hospitalized due to exposure to chemical vapors/gases when working in the kitchen.,1
"An employee was operating a rail saw and drill table when a hydraulic cylinder became detached from a push bar and the machine jammed. While attempting to unjam the machine, he placed his right foot between the end of the cylinder and the jammed push bar. The hydraulic ram then actuated and punctured his right foot.",1
An employee was hospitalized after stepping on a L-shaped nail while working on a construction jobsite.  ,1
An employee was injured during a fire at a gas well.,1
"A technician was called out for a gas leak.  The Tech was ""smelling"" out the gas with a meter.  He had been around the residence and crawled under the porch.  He moved some pesticide bottles the owner had under the porch.  When he moved them they released a gas that struck him in the face.",1
Employee was cleaning the wash tank when the hose disconnected from the pump and sprayed Minncare (a disinfectant) on his lower back. This caused a chemical burn to his lower back.,1
Employee was at the registration desk. She was moving out of the way of a crowd of people coming in when she stepped on a dolly with her right foot. She lost her balance and fell. Employee suffered a fracture to the left hip.,1
"On or about February 15, 2015, an employee's leg was pinned between a sit-down forklift and a guardrail. Employee sustained broken bones to the left ankle.",1
"On Sunday, 2/15/15, an employee was walking outside to the bag house area when he slipped on ice and rolled his ankle.  The employee required ankle surgery.",1
A Stericycle employee was labeling 55 gallon drums and a yard employee on a forklift was carrying palettes of fruit. The yard employee struck the Stericycle employee and pinned him between the palettes of fruit and the 55 gallon drums.  The accident resulted in a fracture just above the employee's right ankle.,1
"Employee was assaulted near the main entrance door by a customer. Employee was hospitalized with a laceration to the face, requiring stiches.",1
"On or about February 16, 2015, at the repair shop, an employee was pulling a wrench from a boat and slipped and fell backwards onto the floor, fracturing his hip. The injured employee was taken to the hospital and admitted overnight for treatment.",1
An employee slipped on black ice in the parking lot as he was walking into work. The employee fractured his T3 vertebrae.,1
Employee was on a ladder putting up decorations for an upcoming event. Employee was coming down the ladder and missed a rung resulting in a fall to the ground five feet below. Employee fractured the left wrist.,1
A maintenance employee was trying to unplug the transfer line between the mixer and the packer.  The machine was not locked-out. The employee reached a hand in and it amputated the index and middle finge tips on the right hand.,0
Employee cut his hand while picking up a piece of metal and stepping on the pedal of the power press brake machine.,1
Employee was working from a scissor lift approximately 12 feet high when it collapsed and ejected the employee onto a concrete slab.  The employee was admitted to the hospital with a broken arm and a broken back.,1
The employee was cutting blinds on the blinds cutter machine and then proceeded to remove product while the blade continued to turn. The employee's left hand index fingertip came in contact with the rotating blade and was amputated. The equipment was guarded. The employee had surgery and the fingertip was successfully reattached.,0
"Ski instructor fell while avoiding a minor student, resulting in a broken hip.",1
"An employee was walking in the hallway when she tripped on a mat.  She fell to the floor, hitting her arm on the wall on the way down. She fractured her right arm.",1
Employee was rotating a plastic 4 x 4 ft. square container counterclockwise when the container slipped and his left pinky finger became trapped between the container and a stationary pole.  Employee's fingernail was taken off and the tip of his finger was amputated.  Employee had in-house surgery on 2-18-2015 to repair his finger.,0
Employee picking up items to take back to the hospital for sterilization slipped and fell breaking a rib and vertebrae.,1
"Employee was operating a powered pallet jack in a congested area with racks.  When the employee pushed down the handle on the pallet jack, to engage the device, the tip of his left index finger was caught between the rack edge and the handle resulting in an amputation injury.  ",0
An employee received an electrical shock from a crust warmer.,1
Employee's fingertip was amputated while cleaning a printing press roller.,1
An employee was arc welding on a boiler feed pump shaft that was made of 410 stainless steel.  The employee was wearing a respirator designed for Hexavalent Chromium.  The employee went to the hospital and was admitted for respiratory issues after finishing his shift.,1
Employee suffered an amputation injury to his right hand pinky finger while performing maintenance work on the Ferris Wheel located at the theme park.,0
"Employee was pulling a banner when she tripped and fell, hitting her head. She received a concussion and was hospitalized.",1
An employee was assisting in the positioning of a table that is used to guide steel forms. A crane and signalman were used to pick up and position the table. The employee went under the table to ensure that it was going to set level and the table was set down on the employee's left middle finger. Later that day the tip of the finger was removed by a doctor.,1
An employee operating a forklift had his foot caught between the forklift and a pallet.,1
"On or about February 16, 2015, an employee was injured when a coil of metal weighing approximately 2,000 lbs. fell on his right leg.",1
"Employee was observing a rigging operation. The rigging hook caught on something and when it dislodged, it hit the employee in the face causing a skull fracture in the sinus region.",1
An employee amputated the middle and ring fingers on the right hand while operating a hot stamp printing machine in the Ace Plastics division of the company.,0
"On 1/16/15 at approximately 10:00 p.m., employee was loading a welding robot.  The employee accidentally activated the lever with his left hand; the clamp cycled and caught the employee's right thumb, resulting in an amputation.",0
Employee had a finger surgically amputated after sustaining an injury while filling a tanker truck with water. The employee's pinky ring caught on a grease fitting while he was climbing off the truck stripping the skin from the center knuckle to the tip of his finger.,0
An employee was helping to unload a box truck.  The employee slipped on a dock plate and fell to the ground.  The employee broke his ankle in three areas and sustained a dislocated shin.,1
Employee cut the second finger on his right hand while operating a panel saw and pushing through some balsam wood components.,0
The worker fell backwards towards the slump rack stairs while washing his concrete truck and sustained a laceration to the back of his head.,1
Employee was attempting to close a manually propelled gate associated with a fence system.  The conditions were cold and icy.  The weather conditions were making it difficult for him to close the gate.  The employee had to get extra leverage on the gate to get it closed.  He reached up around/near the gate's rollers as he applied extra leverage to the gate with his body.  The gate suddenly gave way and the employee's finger became trapped in a pinch point created by the gate's roller and the horizontal bar the roller slides across.  His fingertip was amputated by the pinch point between the roller and the bar.,0
One employee suffered burns to his face and both hands while dousing a fire that started in the paper making machine. The employee remains hospitalized. A second employee sustained smoke inhalation symptoms and was treated and released on the same day. Both employees were using a fire hose to douse the fire with water.,1
Employee was struck on the side of the head by metal that fell off a flat bed trailer he was loading.,1
"A worker on a dock was loading onto a vessel, when the loading chute fell on his left foot, injuring his pinky toe and the toe next to it.",1
Employee fell from an 18-inch high platform measuring approximately 18 X 20 inches while performing a corrective action on a packaging machine. Employee fractured ribs and scapula.,1
"An employee was installing a cable on a telephone pole, working from a 28-foot ladder. The employee fell approximately 18 feet while descending the ladder.",1
"Employee was opening a bag of guacamole using a knife without cutting gloves.  The knife went sideways, cutting her left index fingertip.",1
"On or about February 17, 2015, an employee slipped and fell in the employee parking lot injuring her hip.",1
Employee was walking from the building to a government vehicle and slipped and fell on icy ground.  Employee sustained a head concussion.,1
A Clark Trucking employee who was supplying a sub-contractor with stone on a construction site was hospitalized after suffering from a severe arm injury when his arm was crushed between a trailer and trailer box.,1
Employee slipped on ice in the rear parking lot of the nursing home and was hospitalized with an ankle injury.,1
"At 10:45 AM on February 17, 2015, an employee's left leg was struck-by a pipe while unloading a truck causing a deep thigh bruise. The employee was hospitalized overnight.",1
The injured employee was descending from the roof using a ladder. A second employee started to descend the same ladder. The second employee hit the injured employee on the head and knocked him off the ladder. The injured employee fell about 6 feet to the ground.,1
"While repairing an elevator's counterweight, the mechanic isolated the counterweight by wedging a tool under it. The wedging tool dislodged, the counterweight moved, and the mechanic got his hand caught by the moving cable into the guard of the sheave. The incident de-gloved his hand and caused the skin to be ripped from the bone.",0
An employee who was working as a picker/packer in the Bulk Packaging Area was moving cartons when the individual suddenly felt extreme pain and was taken to the hospital.  The individual was diagnosed with a hernia and had to undergo surgery. The cartons weighed approximately 35 pounds each.,1
"An employee, unloading lauryl dimethyl amine from a truck, was sprayed with the chemicals. The employee received burns to the face, neck, and abdomen.",1
An employee was retrieving stock using a 6-foot aluminum step ladder and fell injuring the elbow and hip requiring surgery.,1
"On or about Feb 17, 2015, the injured employee was found by another employee at the bottom of the stairway at a client's facility located at Kasco, LLC (1569 Tower Grove Ave., St Louis, MO). It appears from where the employee was found, that he had attempted to carry five cases of soda up a stairway with a two-wheeled dolly and lost the load. The stairway that was involved in the accident has approximately 16 steps and does not have a landing.",1
Employee was struck by a forklift as the employee was walking behind it.,1
Employee was using a skill saw to cut 4X4s. The saw kicked back cutting the employee's finger.,1
An employee injured his foot while opening a hangar door.,1
"While cutting mangroves, a stem struck the employee's left foot, causing a laceration.",1
"An employee was trimming hedges and lacerated the ring, middle and pinky fingers of the right hand.",1
"An employee was disposing hot oxide out back and the steam radiating from the hot, granular material (1000 F) burned the back of his legs.",1
"On February 17, 2015, at approximately 5:30pm, an arc flash occurred while an employee rolled in a 4kv breaker to the Coal Yard Area. The employee received small first and second degree burns to his right and left hands.",1
"An employee was using a spin blaster on the inside of a pipe when his hand got caught in the sprocket and chain, amputating his left-hand ring finger.",0
Employee fell and hit his head in the parking lot as he was coming to work. The employee had a bleeding wound to the head and was admitted to Reading Hospital.,1
"A truck backed into the dock crooked, preventing PIT entry into the trailer.  The dock latch was engaged, and the truck needed to pull out and back in again. The injured employee attempted to release the hook. The hook re-engaged, pinching the employee's fingers between the hook and trailer. The employee received an amputation to the right ring finger and scratched the right pinky finger.",0
While folding a cardboard box an employee tripped and fell onto her hip on the concrete floor.,1
"The employee was delivering mail to a residential home. While walking on blacktop, the employee slipped on the ice and fell, breaking the left ankle.",1
"Employee was hospitalized after falling off a ladder on February 17, 2015.",1
An employee was using a pneumatic disc grinder when the disc caught on the material being ground and broke into pieces. The disc pieces struck the employee in the side of the face causing a severe laceration from the ear to the jaw bone requiring hospitalization.,1
The employee was cleaning a bathroom and mixed two chemicals resulting in struggled breathing and possible loss of consciousness for a short time. The employee admitted to a hospital.,1
Employee sustained a head injury when a bread bin hit her head.,1
An employee was operating the tie machine when it moved unexpectedly and caught the employee's left foot in between the brakes.,1
Employee had the tips of his left hand index and ring finger amputated. The employee was performing maintenance on an auger machine. He climbed onto the machine to reach a motor belt and pulley that was seven feet from the ground. He was turning the belt and pulley on the motor to see if it was working properly when another employee energized the auger causing his fingers to get caught by the nip point between the belt and pulley.,0
"While delivering mail on a rural route, employee slipped and fell due to snow and ice. This resulted in a right lower leg fracture of both bones. Employee was hospitalized and needed emergency surgery to repair the leg.",1
"On 2/17/15, an employee operating a manual drill press got a glove caught in the drill bit and suffered an amputation to a portion of the pinky finger.",0
Employee walking back from pump house slipped and fell on ice and fractured ankle.,1
The employee's right hand was caught in the feed of the extruder. The tip of the right-hand index finger was amputated.,1
"On 2/17/2015 at approximately 9:00 a.m., an employee was removing a stator (pipe) from a pre-treat oven.  The tooling at the base of the stator caught on a cavity inside the oven.  The crane continued to pull the part up and as the employee was trying to move the part, the hook of the holding device sheared and smashed his left index finger.  The amputation occurred when the employee tried to pull his hand out of the way.",0
An employee received severe lacerations and was hospitalized when his hand entered an injection mold machine.,1
"On or about February 18, 2015, an employee suffered an amputation of part of his left pinky finger when an entry door slammed on it due to a strong gust of wind.",0
An employee was standing on a pipe rack using his feet to roll pipe to the edge when his foot was caught by a pipe causing him to fall off the rack. The employee's foot was broken by the pipe that also fell off the rack.,1
"An employee was injured and required hospitalization for a crushed pelvis and ruptured urethra when a waste compactor was activated and the anchor bolts holding it down broke, trapping the employee between the compactor and a wall.",1
An employee experienced a partial fingertip amputation (only skin; no bone) when his finger was pinched by a mini-excavator bucket.,0
"Employee delivering slabs of solid surface material was standing on a truck flat bed while employees of the receiving company unloaded a slab.  The Abaco clamp holding the material gave way, releasing the load and knocked the injured employee from the truck bed.  The slab broke into pieces and a section fell, striking the injured employee below the knees on both legs breaking them. The injuries required hospitalization and surgery.",1
An employee was injured when he fell from a ladder.,1
"Employee's fingertip was amputated while cleaning the high-speed mixer. At the hospital, they sewed it back on.",0
"The employee was performing a visual inspection of a motor, lost his balance, and placed his hand on a running motor. His right hand slipped below the guard and his fingers slipped into the running belt and spindle, severing the tips of his index and middle fingers.",1
"A maintenance employee was connecting a meter to a disgester. The employee was checking the digester probe when he was splashed by hot condensate from the digester. The employee suffered burns on the right torso, right arm, and right thigh. He was transported to the hospital where he received emergency treatment and was kept overnight for observation.",1
Employee amputated the tip of her thumb and nail (no bone) using a deli meat slicer.,0
"An employee was using a wax/grease stick to grease the blade of a horizontal band saw. The blade yanked the stick, pulling the employee's hand into the blade amputating the left middle finger.",0
"Am employee  working in the receiving area, sustained amputations of his right middle and ring fingertips on 2/18/15 at 7:30 PM. The employee's fingers were caught and amputated by receiving line gears while attempting to dislodge a cage. He was treated at Beebe Medical Center and hospitalized for 23 hours.",1
A maintenance technician was struck in the head by a carriage lapper belt.,1
"On Wednesday, February 18, 2015, at approximately 1:15PM, an employee amputated the tips of the right hand ring and middle fingers while operating a table saw.",0
A worker was carrying hot water in a kettle and was burned when it spilled on both legs.,1
"An employee was shaping a piece of wood with a router. When the employee lifted the guard on the router to shape the wood, the tip of his right ring finger was amputated.",0
An employee tripped over a rug and fell breaking his hip.,1
A employee fell off the roof and was hospitalized on 02/18/2015.,1
Employee was installing outside showers and hose bibs when he was struck on the head and shoulder by a falling piece of material from approximately 50 feet above him. Employee was in-patient hospitalized.,1
"In the warehouse, employee was standing on a 6-foot ladder adjusting some boxes with appliances inside when the ladder shifted a little bit.  He was working from the top step and fell to the concrete floor on his right side.  He sustained five fractured ribs, a laceration to his liver, and a lacerated or punctured spleen.",1
"On or about February 18, 2015, an employee operating a sit down forklift was injured when the employee's hand was caught between the roll cage and the rack.",1
"Employee on mail route slipped on ice, fell and broke the right ankle and leg below the knee.",1
An employee suffered a left-thumb amputation when it got caught in metal cording used for safety harnessing.,0
"Employee was setting a column form with an overhead hoist, when his finger became caught between a metal bracket and a two by four. The bracket lacerated the tip of the employee's finger and shaved a small portion of the bone. Employee was taken to OccuCare Medical clinic, where he was then referred to a specialist at Memorial Herman Hospital.",1
An employee suffered hand and wrists injuries at work on 2/18/15 and was hospitalized.,1
"An employee was wearing gloves while operating a jointer. The glove on his right hand got caught between the fence on the machine and a piece of wood. The employee pulled his hand back before the guard could close, resulting in the amputation of approximately two-thirds of the little finger on his right hand.",0
Employee was shot in the leg while participating in firearms training.,1
A worker fractured the wrist and left knee after falling while carrying a tray of dental tools. The employee was hospitalized.,1
"Two employees were attempting to take the forks off of a forklift. One employee was using a pry bar to lift the forks and the other employee was using his hands to push the forks. The pry bar slipped from under the fork, causing it to pinch the fingers of the employee who had been pushing the forks. One of the employee's fingers was amputated to the first joint, while another finger had the very tip pinched off.",1
"On or about February 19, 2015, an employee tripped on a call light cord in a patient's room and fell breaking a hip.",1
Employee fell approximately 7 feet off a highway retaining wall while lowering a jackhammer.,1
"On or before February 19, 2015, an employee slipped and fell on ice while carrying a 2-inch x 30-foot-long piece of pipe, resulting in a tibia/fibula fracture to the right leg.",1
"Employee missed a stair rise while descending a flight of stairs, but did not fall.  After a few hours, the employee complained of pain and was brought to the emergency room.  The doctor's diagnosis was a fractured hip. Employee was admitted to hospital for pending surgery.",1
"An employee was loading a truck. The dock plate that joins the ramp to the truck was frozen, so the employee jumped on it and exacerbated a prior back injury.",1
"Employee was working on the back of the trailer when the lift gate inside the lift was activated. As the lift gate folded, it pinched the employee's left hand between the folds, resulting in an amputation of the left thumb, pointer, and middle fingers.",1
Employee's little finger was crushed and amputated by an industrial washing machine door.,1
Employee was euthanizing a sick dog. The dog lunged unexpectedly and bit the employee on the hand/lower arm.,1
"On 2/19/15 at approximately 5:30 PM, an employee slipped on black ice in the parking lot, injuring her tail bone and requiring overnight hospitalization.",1
"On February 19th, an employee fell off a ladder and was hospitalized.",1
An employee was admitted to the hospital after getting his left forearm caught in the Huw Saw.,1
Employee was wrapping a tarp onto an articulating boom bucket mounted and stored on a service truck. Employee fell approximately 6 feet to the ground and suffered fractured ribs.,1
Employee fell and broke her right leg. This resulted in an overnight stay in the hospital.,1
"Employee was cutting a tree. As the tree fell, it struck another tree and bounced back on the employee. The employee suffered a broken ankle.",1
"Employee was confining a heifer in an attempt to tag her ear. The heifer threw its head, pinning the employee's arm between its head and the pen breaking his arm.",1
"Employee was preparing to euthanize a non-performing hog. He went to the shop and retrieved a Captive Bolt Gun and returned to the pen where the hog was located. He loaded the gun and put the safety on. As he was climbing into the pen, the gun fell. When it hit the floor, the gun discharged, and the 3"" projectile attached to the gun struck the caregiver in the right thumb, puncturing his thumb and breaking the bone.",1
"Employee was standing on a pile of metal pipes. He was directing a forklift operator to remove one of the bars. As the forklift operator moved the bar, the employee's legs got caught under the load, injuring both.",1
Employee was walking to his truck when he slipped on some ice in the parking lot.  Employee fractured his left ankle and underwent surgery.  Employee has been in the hospital for one night.,1
An employee was walking through the yard to get his equipment and slipped and fell on the ice. The employee twisted his ankle and chipped a bone in his foot which required surgery.,1
An employee amputated the left index finger while operating the wire mesh looming equipment.,0
"Employee was installing an incline conveyor.  He was using two chain falls and four come-a-longs. One of the come-a-longs was removed, causing the others to become overloaded, and the conveyor fell. The employee suffered broken bones in his legs, feet, spine, and pelvis area.",1
An employee received a crushing injury while servicing a chain and sprocket drive system.,1
"A vessel was being unloaded with steel pipe. A forklift was coming in to pick up material to be put into a truck. An employee was inspecting the load that was to go into the truck. As he was looking at his check sheet, the forklift operator made a 90-degree turn and backed into him, injuring his right leg and foot.",1
Employee's leg was caught between a cable and a stable bar when moving an anchor buoy in the Shinecock Inlet.,1
An employee suffered an amputation while pushing fugitive product back into an auger.,0
Employee was walking in the back area of the laundry facility when he tripped over his own foot and fell onto a laundry cart and suffered an injury.,1
An employee fell while pulling a garbage cart.  The employee was admitted to the hospital with an injured hip.,1
An employee was cleaning up underneath a conveyor and got sawdust in his eyes. He also struck his head when reacting to the sawdust. He required overnight hospitalization.,1
An employee was hauling freight using an industrial truck. The freight became unstable and fell on top of her while she was transporting it.,1
An employee was walking and fell fracturing his right hip.,1
"Employee working with crew to remove snow from the roof of a large industrial building fell through a skylight, approximately 40 feet to the floor below. Outcome at time of call was unknown.",1
"An employee performing maintenance to a cell rectifier was standing on the platform where the equipment was located.  The platform stood approximately 1 foot above the ground.  The employee stepped down, slid on black ice, and fell on his back.",1
"Employee slipped on icy stairs and fell. Employee was knocked unconscious, broke ribs, and punctured a lung.",1
"On February 20, 2015, at approximately 6:30 a.m., a maintenance employee was using a 12-inch pedestal grinder to grind spurs off a small piece of metal he was holding in his hand at a 45-degree angle. The end of the piece of metal got caught between the grinding wheel and the work rest, causing the piece part to become lodged in a fixed vertical position against the grinding wheel and catching the employee's left thumb between the piece part and the grinding wheel.  The employee was treated in the emergency room immediately following the accident with a fractured and lacerated thumb. Upon subsequent referral to a hand surgeon, the diagnosis was expanded to include partial amputation of the thumb.",0
An employee handling/picking materials from a shelf was hospitalized after falling 6 feet from a step ladder.,1
A postal worker delivering the mail slipped on ice at the end of the driveway and fell and breaking his leg.,1
"An employee was inspecting a ship intake duct that had been fabricated. The employee heard someone grinding above him and when he looked up, a piece of welding slag fell into his mouth. The employee removed the slag from his mouth and continued working. Later that evening at his residence, the employee experienced breathing problems. The employee went to a hospital emergency room for treatment where it was discovered that the employee had welding slag in his throat. The employee was admitted to the hospital and surgery was performed to remove the welding slag.",1
An employee assembling wooden boxes was hospitalized overnight after a nail was driven into his right kneecap.,1
"Employee was lifting a five gallon bucket up through a manhole, then stepped back, and tripped backwards off of a 12 inch to 18 inch concrete slab he was standing on. Employee broke his foot and was hospitalized.",1
"On or about February 20, 2015, an employee's middle two left-hand fingers were amputated just above the first knuckle when a stainless steel guard came down while working on the auger.",0
An employee was struck by a portable aluminum extension ladder that fell from the side of the east wall.,1
Employee installing drywall suffered a broken leg when a slab of drywall fell. Employee was admitted to the hospital.,1
"On 02/20/2015, at approximately 9:00 am, employee was walking to building 103 when he slipped on ice and dislocated his left ankle. He was transported by Huntington Ingalls' emergency medical unit to Riverside Regional Medical Center and admitted.",1
"Employee was climbing onto the back of a disposal truck to clean the blade when he lost his footing and fell, landing on one leg and fracturing the tibia of the right leg.",1
"On February 20, 2015, an employee conducting preventative maintenance work on a heater was injured when the scissor lift he was standing on was struck by the structural steel beam for a gantry crane. He suffered multiple fractures on both sides of his body, as well as a dislocated left hip, when he fell approximately 15 feet to the ground.",1
A warehouse employee suffered a broken left ankle while unloading material from a wagon and was hospitalized.,1
"On February 20, 2015, at approximately 8:10pm, an employee fractured and lacerated his right hand when it was caught between the cylinder being worked in the lathe and the boring bar. The injury resulted in surgery and hospitalization.",1
A City Carrier in Nashville was delivering mail when she slipped on ice and fell breaking her ankle. She was hospitalized and underwent surgery to repair her ankle.,1
"On February 20, 2015, an employee was injured when a Genie man lift rolled over. The employee was hospitalized.",1
An employee was working at a decorative line when the tip of the right pinky finger was amputated by the Rademaker machine.,0
A propane heater burned the back of an employee's legs.,1
An employee was working at approximately six feet in height when he fell from an A-frame ladder.  The employee suffered a head injury requiring in-patient hospitalization.,1
On 2/20/2015 a worker was using an overhead crane to move a 200lb lift gate.  The crane fell from its support and landed on the employee's back. The employee broke several ribs and was admitted to the hospital.,1
A chop saw foot pedal was accidentally activated and cut an employee's right index finger. The finger was amputated.,0
"On 20 February 2015, at approximately 1100hrs, employee was holding a pin that was being hammered by a third-party employee. His right, middle distal phalanx was struck by the hammer and crushed. The employee was taken to Midland Memorial Hospital. The distal phalanx was surgically removed on 23 February 2015 during an outpatient procedure.",0
Employee was operating a stomp shear with a co-worker. The employee was inserting some metal into the shear to be cut when his fingers slipped into the machine as the co-worker activated the stomp shear.,0
An employee working on an oil-and-gas service rig suffered partial amputations of the right middle and right ring fingers after his hand was caught between the tong plate and the pin that secures the tongs.,1
"An employee was hospitalized due to an injury sustained when the spray from a power washer contacted his boot, causing a severe laceration. The employee was wearing leather work boots.",1
Employee's foot became caught under a tire; employee fell and fractured bone.,1
Employee fell off of rail on truck during bulk feed delivery.  The employee was hospitalized overnight with a dislocated shoulder and fractured ribs.  ,1
An employee suffered an amputation injury while operating a press brake.  ,0
"Employee was setting a place pump for concrete when the pump caught, crushed, and amputated his right ring finger.",0
"Employee's monster truck rolled over, resulting in a cut to the lower left leg and a sprained ankle.  The employee was hospitalized overnight.",1
The employer reported an amputation that occurred on 1-21-2015 at approximately 3:00pm.  The employee was working on a coil end welding machine when his left index finger was caught in a hydraulic clamp.,1
"Employee was working on a sorting platform approximately 8 feet off of the concrete/ground. As employee descended a fixed ladder, he lost his grip and fell to the ground in a standing position, fracturing his right leg.",1
An employee was injured when she lost control of a forklift and attempted to dismount it.  The employee was pinned between the forklift and a wall.  The employee was taken to the hospital and received surgery.,1
An employee's finger was crushed by the t-pusher of the monorail system during maintenance.,1
"Employee reached below a luggage belt to clear a jam in the domestic counter area. He severed three fingers on his right hand (thumb, pinky, ring).",1
"On 2/21/15, an employee's fingertip was amputated. The finger was caught between two bricks on a convert belt and was torn off. The employee was taken to Louisiana Medical Center and Heart Hospital.",1
An employee was performing maintenance work on a crawler crane's ignition system while standing on the track which provided only 5.5 inches of surface to stand on. The mechanic slipped and fell approximately 59 inches and broke his right leg. He was admitted to the hospital.,1
 An employee sustained an injury to his left pinky finger as he was polishing a coil with a CNC lathe. The door safety interlocks were disengaged allowing the employee to polish parts of the coil as the machine was running.,1
Employee was climbing a locked fence when his ring finger got caught on the fence and was amputated.,1
Employee experienced leg injuries when snow fell on the employee's leg(s) while trying to manually dislodge snow/ice from the elevated bed of a dump truck.,1
"On February 22, 2015, a patient microwaved a cup of coffee. The patient then threw this hot cup of coffee into the face of the injured employee. The employee sustained burns to his face and was hospitalized.",1
On 2/22/2015 at approximately 8:45 PM an employee was carrying several cutting boards from the cook line to the dish area at clean up time. The employee tripped or slipped and fell on his left side. The employee was hospitalized for a fractured leg and hip that required surgery to repair.,1
"Employee amputated the tip of the left-hand pinky finger while pulling 20' long pipe from a pipe rack.  While pulling one section of pipe from the rack, another pipe shifted; the employee's finger became caught between the pipe and pipe rack, which caused the amputation.",0
Employee was hospitalized due to being struck in the head by a backhoe bucket.,1
"Employee was injured in an 18-foot fall from an access platform between two boilers when the catwalk grating gave way. Employee suffered a broken pelvis, fractured ribs, and a dislocated shoulder.",1
An employee amputated his fingertip while tearing down a setting tool on the McMaster Pad site.,1
"An employee returning from lunch walked into the store with wet feet and slipped and fell backwards. She fell onto her right leg, but did not hit her head.",1
Employee had two fingers injured/amputated while unjamming a snow blower.,1
"On February 22, 2015, an employee working for a home healthcare service was going up an icy set of stairs, slipped, and fell.  The employee injured her neck, shoulders, and both thighs.  Employee was hospitalized.",1
A maintenance worker suffered a crushed arm when he was struck by the moving parts of a tray stacking machine.,1
An employee suffered electrical arc burns on right hand while performing maintenance on an electrical plug/twist lock on a 2-ton hoist.,1
Employee was admitted to the hospital for back strains and muscle spasms after subduing a patient.,1
"The employee was working at a production line where breast meat is inspected prior to packaging. The employee reached down and underneath a conveyor belt where her glove was caught in a pinch point, amputating her right index fingertip. The doctor described it as a de-gloving of the fingertip with removal of the bone tip.",1
An employee sustained a cut to his left index finger when his hand made contact with the blade as he was cutting lamb chops on the band saw.,1
"On February 23, 2015 at approximately 2:50 pm, an employee slipped on a wet floor and fell and broke her hip. ",1
The tip of the employee's thumb was amputated by a knife while chopping cilantro.,1
An employee slipped on ice and fell in the parking lot.  The employee suffered a broken hip and was hospitalized as a result.,1
"On 2/23/2015, an employee was injured on the job during a conveyor belt operation that is used to move old paper through employees for recycling separation. The belt is moved or powered by a chain and sprocket system.  The employee attempted to remove some debris from the chain. He had on safety gloves, which were caught in the chain and/or sprocket. The employee was injured when his finger was caught and lacerated, but not severed at a joint.",1
"On or about February 23, 2015, employee amputated three fingers while operating the bandsaw.",1
Employee was walking through hallway and injured right knee requiring hospitalization.,1
An employee suffered a partial amputation of the right index finger while performing work on the ACW Machine after another employee reconnected a pneumatic line to the machine. The pneumatic ram shot forward and caught the employee's finger in a pinch point.,1
Employee was walking from the showroom to the parking lot to deliver a car when he slipped on ice and fractured his right leg.,1
"Employee was setting up a 15 foot extension ladder to get onto the roof. After he climbed the ladder, he went to connect the ladder to the building with a bungee cord.  When he was connecting the cord and pulling it tight, he ended up pulling himself off the ladder.",1
"Employee's first three fingers were cut by the stacker while clearing a wood jam. He was hospitalized at Bryan Whitfield Memorial Hospital in Demopolis, Alabama. Amputation is still to be determined.",1
"A forklift operator pushed a pallet into another stack of pallets, which struck the injured employee on the left leg. She sustained a broken leg with multiple fractures. Incident occurred in the distribution-receiving department located in the south side of the building.",1
"Employee operating a forklift was injured, resulting in a compound fracture. Employee underwent surgery and is hospitalized.",1
Employee fell from a scaffold platform; employee was injured and hospitalized.,1
"An employee suffered a laceration and burn injury to his left cheek while maneuvering a 20-foot-long, 3/4-inch-diameter pipe from the sizing mill area to the hot rack with a mechanical lifting/maneuvering device. The employee was hospitalized for treatment.",1
"Employee got off the bus to go on a break. While walking in front of Ted's Restaurant, he lost his balance and fell on the sidewalk. He hit his head and lost consciousness.",1
An employee lost his balance while unloading lumber from a rail car and slipped and fell. The individual was found unconscious and taken to the hospital.,1
An employee's left arm was amputated while working with a noodle-making machine.,0
"Employee's right ring finger was amputated after it came in contact with the blade on a bread divider. During a jam, a photo electric eye is supposed to shut the machine down. The photo electric eye malfunctioned as the employee reached into the machine resulting in the ring finger amputation.",0
"In an attempt to enter a locked room, an employee used a ladder to climb over the door through the false ceiling. He slipped and fell through the false ceiling resulting in a concussion and broken ribs.",1
Employee's fingertip was amputated. He was operating a pallet jack when his finger was pinched between the jack and a metal bin. The fingertip was reattached.,0
Employee suffered an amputation past the first joint of his left ring finger and tip of his left pinky finger while operating a machine in the PMP Dept.,0
"Employee was walking to vehicle in parking lot, slipped on ice, and broke hip.  Employee was admitted to the hospital for surgery.",1
"On 23 February 2015, at approximately 1030 hrs at the Flogistix manufacturing site in Pampa, Texas, employee was cutting a metal stud on a chop saw when the material kicked back and crushed the distal phalanx of the index finger (right hand). The employee was taken to Pampa Memorial Hospital where physicians opted to amputate due to the extent of the injury.",0
"On or about 23 February 2015, an employee of Coastal Plains Trucking was injured and hospitalized when the vehicle he was driving hit icy roads and overturned.",1
Employee slipped on ice and fell fracturing the right leg.,1
"Employee's feet became entangled in computer wires underneath her workstation. She tripped and fell as she attempted to get up from her chair, resulting in a fractured left arm.",1
An employee was bending down on one knee to look at a pro/tracking number on a package when he was struck by a forklift driver who was backing out of a trailer.,1
Employee suffered a partial amputation of the right index finger while operating a meat slicer to slice onions.,0
An employee suffered a broken ankle and was hospitalized when a large metal baffle fell from the table and stuck his leg.,1
Employee's hand got caught in a dump truck gate. Employee suffered a crushing injury to the hand; emergency surgery was conducted.,1
"Employee fractured his ankle when he slipped on ice while walking to the cargo van, resulting in hospitalization and surgery.",1
"On or about February 23, 2015, at 3:10 p.m., an employee slipped on the sidewalk outside the Gram Building and fractured her right elbow. She was hospitalized and required surgery.",1
"The employee was checking the water in the front-end loader. When he stepped down, he fell and fractured his right leg.",1
An employee cut off the tip of her left-hand pointer finger while cutting bell peppers.,0
"On February 24, 2015, at approximately 7:00 AM, an employee tripped on a call cord and fell.  This fall resulted in a fractured hip, requiring hospitalization.",1
An employee moving pallets with a pallet jack was hospitalized after he felt pain in the groin area while taking a turn.,1
"On 2/24/15, an employee was injured/hospitalized after falling from a ladder while tying in ductwork.",1
An employee cut his wrist while operating a polishing wheel and was hospitalized overnight.,1
An employee suffered a partial pinky finger amputation from being cut on a die.,1
"An employee walked to the rear of a small crane to retrieve his tool bag. The crane operator extended an outrigger that came down on the employee's right foot, causing multiple fractures. The employee was admitted to the hospital for surgery.",1
Employee's finger was caught between a baler and power jack; employee was hospitalized.,1
"An employee was hospitalized after sustaining injuries during a snowmobile incident where they struck a tree. The employee broke an ankle, requiring in-patient hospitalization and surgery.",1
"On 2/25/2015, an employee's left index finger was caught in a conveyor belt that was being used to move shingles to a rooftop and crushed but not severed.",1
"On 02/24/2015, employee was working in the deli department when she tripped over cords on the floor and fell. She broke her hip and was hospitalized.",1
An employee was operating a t6 roll-threading machine. He placed a bar into the machine; the machine cycled and caught his hand between the bar and the machine.  His right middle finger was partially amputated.,1
Employee burned left hand with pot handle and was hospitalized due to infection. ,1
"An employee delivering mail slipped on ice in a driveway, causing injury to the left tibia.",1
"Employee was operating a product filling machine and the machine was leaking onto on the containers.  The employee opened up the safety guard and tried to wipe down the heat jaws with a cloth when the jaws closed on his hand, amputating three fingers.",0
"An employee was hospitalized following a collision with another skier on the lower Columbine Trail, which resulted in a broken leg and wrist.",1
An employee's hand was fractured when a 1700 pound John Deere fuel tank fell from a transporter cart the employee was pushing.  The tank fell because the cart frame broke. The support bar for the tank struck the employee's right hand as it fell. The employee sustained fractures and a severed tendon.,1
An employee slipped on ice and fell in the truck yard.  The employee was hospitalized with a broken ankle.,1
An employee slipped and fell down a flight of stairs while exiting a building. Weather conditions were a contributing factor.,1
Employee fell approximately 15 feet. No fall protection was being used at the time.,1
"An employee was hit by a metal door that was blown open by the wind, knocking the employee to the floor.",1
"On 2/24/2015, at approximately 2:00 PM, an employee was injured while changing a tire on a large forklift in the forklift maintenance shop.  A smaller forklift was being used to lift the tire into position. The employee was holding the tire in place when the smaller forklift ran over his leg.  Incident resulted in broken bones in the lower right leg.  Injured employee was taken to the hospital and received surgery at approximately 7:00 PM.",1
Employee was delivering lumber when the ladder he was using to access the truck slipped on ice and the employee fell. The resulting injuries required hospitalization.,1
"A powered industrial vehicle ran over an employee's foot, requiring in-patient hospitalization and surgery.",1
"On 2/24/2015, at approximately 2:00 PM, an employee was injured while restocking in the linen department at a department store.  The employee was moving comforters and quilts from the floor to the shelves. The employee's foot got caught on one of the quilts that was on the floor, which caused her to fall onto her right hip.  She could not get back up to her feet from that point.  The injured employee was taken to Kingwood Hospital for treatment and is awaiting possible hip surgery.",1
"While operating a door lifter, an employee became caught on the knob. The employee was lifted up in the air and fell 4 feet when released, sustaining a cut on the leg. The employee received stitches and was kept overnight.",1
"Employee was driving a scissor lift through a large doorway. When the employee released the controls, the scissor lift jerked backward and caused him to hit his head on the top of the doorway. The employee exited the scissor lift, started walking, fell, and struck his head on the concrete floor. Employee was admitted to York Hospital.",1
"At approximately 0800, an employee fell approximately 14 feet to the ground below. The employee was hospitalized and required surgery.",1
Employee was injured by a powered industrial truck that rolled back over the employee's foot. The employee suffered broken bones in the foot.,1
An employee was coming out of the utility room and caught a finger in the door. The index finger suffered a soft tissue amputation at the end and skin was removed to the first knuckle.,1
"An employee's gloved  hand got caught while operating a lathe, resulting in a broken wrist and laceration of the left pinky finger.",1
"While climbing down a military vehicle (MMPV) access ladder, the employee's wedding ring on his left hand got caught on one of the anti-slip barbs on the step.  When he dismounted the last step, the flesh was pulled from his ring finger, resulting in its ultimate amputation.",1
"On 2/27/15, an employee suffered an in-patient hospitalization. Three employees assembled a stage scene on 2/25/15. The injured employee utilized a self-supported ladder to access the work area, a stage scene of a home with a roof. A portion of the stage scene became unsecure, causing the employee to fall approximately 8 feet from the ladder. The employee struck his shoulder and head and was immediately unconscious. The employee was taken to the hospital.",1
Employee was cutting a 2-inch by 6-inch piece of metal when his right index finger got caught in the shear. Employee's right index finger was surgically amputated from the first knuckle.,0
"Employee was taking a load of manure to the manure pad to dump it.  In the process of raising the trailer, the manure load froze while both of the safety latches at the bottom of the tailgate were still engaged.  The employee exited the trailer and began to walk around the trailer to see why the load hadn't released.  As he got near the tailgate, the manure load let loose and broke the two safety latches (1-1/4"" steel rod), blowing the tailgate open. The bottom of the tailgate hit him in the leg.  The employee suffered a fracture to the left thigh due to impact.  Employee was transported to Backus Hospital and admitted.",1
"An employee's fingertip was amputated while operating a baler in the back room of the store. The employee was lowering the baler gate when it slammed on the employee's fingertip. The employee was seen in the emergency room, where it was discovered that the fingertip could not be reattached.",0
"On 2/25/2015 at approximately 3:00 PM, an employee was injured while performing her duties at a manufacturing shop.  The employee was inserting pieces of metal into a punch/pressure machine when a portion of her right index finger was amputated by the machine.",0
"On 2/25/15, an employee's finger came in contact with the blade of a table saw as it was powering down. The employee was hospitalized.",1
"On 2/25/15 at approx. 5:15 p.m., an employee was sanitizing the muffin batter depositor pump.  She removed the cover off the side of the equipment, sprayed inside, and then reached into the pump with her right hand to check for remaining batter mix. As a result, three fingertips on her right hand were amputated. The machine was not locked out at the time.",0
Employee leaving the store slipped on the sidewalk while getting into car and fractured hip. Employee was admitted to the hospital.,1
"Employee was attempting to cut banding with a pocket knife.  The knife slipped and struck the employee in the calf, hitting an artery. Employee was hospitalized.",1
"An employee was hospitalized on February 25th, 2015, after falling on black ice and sustaining multiple fractures.",1
An employee was driving a utility vehicle out of the north side of the large transfer building when he turned and struck a parked roll-off truck. The employee struck the roll-off truck with his chest and was hospitalized.,1
"Employee was working from a ladder at a private residence. The ladder was leaned against a pole. The ladder fell away from the pole, and the technician fell with the ladder, injuring the right fingers, hand, and wrist. The employee was hospitalized.",1
"On February 25, 2015, at approximately 10:00 AM, the injured employee was working near racking aisle 600.  A stacker truck bumped into the employee's right foot, which caused the employee to fall on his left side and fracture his left pelvis.",1
"Employee working in the Birchwood North Production area attempted to unjam the freezer tunnel with a tool.  The employee reached in with the tool (a few inches) when the tool became caught and dragged her hand into the equipment. Her right index finger came into contact with a pinch point (a roller and the guard), amputating her fingertip.",1
Employee was changing out a piece of pipe while installing underground conduits on a directional drilling rig. He was struck by a wrench. The employee was taken to the hospital with injuries to his forearm.,1
"Employee exited his vehicle and was walking to the back of the trailer to open the door to deliver items. He slipped on the icy, snow-covered parking lot and broke his right ankle.  The employee was hospitalized for treatment.",1
"An employee used the running line that was attached to the hook of a crane to pull himself up. The left tip of his middle finger and half of his ring finger got caught between pinch points (the rope and pulley), resulting in an amputation.",1
"Employee was carrying a building truss with a forklift and placed a truss into a stored area. The employee reversed the forklift and walked up to the stored truss. The truss fell on the employee, causing facial injuries and fractured ribs.",1
"An employee skiing on the Larry Fale Trail was struck by another skier. As a result, the employee suffered suspected rib fractures and other potential injuries to the shoulder and torso areas.",1
"An employee was operating the 1708 machine, finishing a tube.  The machine cycled then stopped. The employee noticed the machine had stopped and removed the guarding to investigate the problem.  The employee saw that the material had pushed the home sensor and then pushed the material back manually, causing it to move forward again.  The material got stuck and at the same time pushed the employee's left hand into the clamp, causing an amputation of the left pinky finger, which left bone exposed.  The employee was transported to Unity Medical Center and admitted.",0
"While riding a scissorlift, employee's face struck a doorway. Employee broke the jaw and was admitted for in-patient hospitalization at the University of Virginia Hospital.",1
An employee going to his car slipped on ice and broke his right leg. The employee went to the hospital and is awaiting surgery.,1
"Employee hospitalized due to being struck by a bale of hay while loading it onto a flatbed trailer. Employee broke ribs, pelvis, and vertebrae.",1
"An employee backed a tractor trailer into the delivery area of a customer store to unload soft drinks. The unloading area has a hydraulic lift platform with a lift gate on two sides because the receiving floor is at ground level, which is  4 feet lower than the trailer bed.  The controls for the platform ride up and down with the platform and are operated by delivery truck drivers.  The employee had finished unloading the product and was preparing to leave. He needed to slightly lower the platform to close the door on the back of his truck. He stood on an 18-inch-wide ledge and fell off. His jacket got caught on the control, which triggered the lift, and he was caught in a pinch point between the lift gate on the platform and the control panel. He suffered a puncture wound in the left groin, a broken pelvis, and a tear in his aorta.",1
Employee suffered a broken finger and a partial amputation on two separate fingers of the left hand while working at the tilt hoist in the planing mill.,1
An employee aboard the Gudrun Maersk fell approximately 18 feet off of a shipping container onto the deck of the ship. He was locking a cone on containers that were on the ship.,1
"On February 25, 2015, an employee suffered an amputation of his left thumb to the first knuckle while operating the RAZ machine.",0
"An employee working in the extrusion department was moving racking material with a crane when he pinched his left-hand, third fingertip between the hook and rack. The employee sustained a fingertip amputation and underwent out-patient surgery.",0
"Employee was attempting to dislodge a dumpster that was frozen to the ground.  When the dumpster broke free, it rolled and pinched the employee's left pinky between the dumpster and a parked truck.",0
"An employee was walking beside a crane, lost his balance, and slipped in the mud.  He couldn't get out of the way and was run over by the crane's wheels, damaging both legs. The employee was hospitalized; the extent of damage was unknown at the time of reporting.",1
Employees were opening a hatch at one of the salt water disposal tanks when a spark created a flash fire. The employee was burned in the flash fire and hospitalized. The other employees received minor skin burns and were examined and released the same day.,1
"Employee received burns to the chest, face, and eyes when an Oxidizer machine containing propyl acetate and alcohol exploded.",1
Employee clearing trees for a gas/oil pipeline installation was pinned between two trees and broke a leg.,1
"Employee slipped on ice in the hospital parking lot and fell, breaking her leg and ankle.",1
An employee suffered head injuries and lacerations after falling off of a truck while strapping down materials.,1
"At the  Typhoon Lagoon Water, an employee was checking the slide for cracks or deformities when the employee slipped or tripped and fell. The employee fell forward and struck the right side of his face on the slide.",1
"Employee fell down stairs while delivering mail to a customer, breaking his right upper leg.  Employee was admitted, kept overnight, and had surgery.",1
"An employee was performing a utility locate near the intersection of Summit and Ridge Road in Eagleville, Pennsylvania.  While performing this work, the employee was struck by a car. The employee was taken to Paoli Hospital to be treated for fractures/contusions.",1
"Employee was selecting orders while walking next to an electric pallet jack. The pallet jack drove onto the employee's left foot, pinning it between the pallet jack and the skid of produce in aisle 34. The employee was hospitalized due to multiple fractures to the left foot.",1
"An employee was standing in a room next to the shaft alley of a boat on a dry dock where two employees were heating a steel coupling (shaft that holds the prop on the boat) using two rose buds with forced air and exhaust ventilation established. They were heating the coupling so it would expand and pop loose. After his shift ended, the employee called and reported difficulty breathing. He was admitted to the hospital where he was diagnosed with possible chemical pneumonia.",1
Employee fell 8 feet when he was transitioning from the ladder to the roof.,1
"On February 26, 2015, an employee amputated a portion of his right middle finger to the first knuckle while arranging 600- to 800-pound I-beams by hand so the load could be picked up with the forklift.",0
An employee was injured when he slipped on ice and fell trying to push a company van.,1
Employee tripped over phone cords and was unable to ambulate afterwards.,1
An employee was hospitalized after falling approximately 18 inches from the first step of a step stool. The employee injured his hip and needed to be hospitalized.,1
"Employee was standing on a pallet talking to another employee. When the employee tried to turn around, she lost her balance and fell to the warehouse floor. The employee injured her right hip and was hospitalized on 02/26/2015.",1
Employee using a Milwaukee Magna drill had his right index finger amputated at the second joint.,0
An employee was pulling a trailer in the Peterbilt Facility yard. The trailer turned sharply and the truck turned over.,1
"While fighting a fire at the shop, employee received a burn to the left leg.",1
Employee slipped off a saw horse and fell resulting in a laceration to his arm that required stitches and an overnight stay at the hospital.,1
Employee slipped on the ice in the parking lot and fell backwards hitting his head. ,1
"Employee was cleaning insulator bushings on top of a de-energized transformer/regulator in preparation for tap switch testing. Upon energizing of control voltage for testing, employee received an electric shock.",1
"Employee reached into the press #78 and his left index finger was severed at the second joint. The press has a pop up release which is activated after the cycle, the employee placed his hand while the pop up release was in operation catching the employee's hand between the part and the top of the press.",0
"On 26 February 2015, an employee was installing drywall from a scissor lift approximately six feet from the ground. While working, the employee fell  off the edge of the scissor lift to the ground.",1
"An employee was starting up a pump and a hose was not secured. As the employee tried to control the hose, he lost his balance and fell at the same level, hitting his head on the concrete.",1
"Employee was operating a yard tractor, backing up a container; it jack-knifed and threw the operator off of the vehicle.",1
"Employee was servicing an HVAC unit at a customer's facility. While disassembling the chiller, the employee stepped off the chiller barrel onto a pipe. The employee's foot slipped off the pipe causing him to fall approximately four feet resulting in a broken rib.",1
"An employee was hospitalized for a possible concussion, after falling down some stairs.  ",1
"At Sam's Club # 4998 in Lady Lake, Florida, an employee was injured when a forklift ran over his right foot, breaking three toes. The employee was helping to load carts when his foot was crushed by the forklift wheel.",1
"A mobile conveyor was moved out of place for cleaning. An employee tripped over the angle iron bracing that remained on the floor. She fell forward, injuring her right arm and shoulder. She was transported to Lehigh Valley Hospital in Hazleton, then admitted to Lehigh Valley Hospital in Allentown when she experienced loss of feeling in her right hand.",1
"Employee was putting a lock on the trailer door in the parking lot and slipped on ice, fell and broke the right ankle.",1
"The employee was using a long board to push debris out of the conveyor, which was stopped up. The employee reached for a hand-hold and instead grabbed the conveyor. One of the 2' blocks of lumber and hit his thumb, resulting in an amputation.",1
"On 2/26/2015, an employee was using a ladder to change a light bulb.  The employee fell from the ladder and was knocked unconscious.  The employee was hospitalized because of the injuries sustained in the fall.",1
Employee was burned by sulfuric acid and admitted to the hospital.,1
An employee had his fingertip amputated while using a rag to de-bur a piece of material coming out of a machine on the slitting line. The machine caught the rag and pulled it with the employee's finger.,1
"On February 26, 2015, an employee suffered severe injuries while operating the A-line machine.  The employee's hand and arm were pulled into the pinch rollers during operation.",1
"Employee was admitted to the hospital after dropping an iron casting on his foot. Employee sustained no broken bones, but foot is swollen and purple.",1
An employee working in the melting department was burned on the left leg when the exhaust line in the furnace loading pit exploded. The employee was admitted overnight to the hospital.,1
"Employee was reporting for work, got out of the car, slipped on ice, fell and struck the back of the head. He was admitted to the hospital for a brain injury.",1
"Employee was offloading steel from a truck when the load shifted, pinning his right arm between the steel. The employee did not break any bones and was admitted to the hospital.",1
An employee suffered a fractured left leg and was hospitalized due to being struck by an automated guided vehicle.,1
An employee fell in the parking lot due to ice on the walking surface.,1
Employee fell approximately 16 feet through a skylight to the ground inside the building.,1
"While cleaning snow off of a roof, the employee fell through a skylight.",1
An employee amputated the very tip of his right-hand index finger while skinning a deer.,0
An employee performing maintenance on a palletizer slipped and fell backwards hitting his head on the concrete floor.,1
"The employee was cleaning a part with a scotch brite pad when he attempted to clean the burrs out of a part while reversing the machine. The pad was caught and drawn into the machine, pulling in the employee's finger and amputating the nail end.",0
"An employee was loading a ladder on the ladder rack of a truck. When the employee went to step down, his ring got caught on the rack and his finger was sliced open.",1
"An employee stacking 115-pound metal skid pallets attempted to straighten a crooked one. Several pallets fell and struck the employee, resulting in a left leg fracture and ligament (MCL) damage.",1
The injured employee was helping chock pipe when the pipe started rolling. The employee ducked down; three pipes hit him in the back of the head and knocked him unconscious. He was transported and admitted to the hospital.,1
"The injured employee was welding with his back to an overhead crane (fitter). The crane operator was using the crane to lift a 4'x3'x12""-wide beam assembly, but the crane was not centered over the load, causing the load to swing when lifted. The swinging beam assembly struck the bulkhead assembly behind the injured employee, causing the bulkhead assembly to fall over and hit the injured employee's body and legs.  The injured employee was hospitalized with a simple fracture in one ankle and a compound fracture in the other leg.",1
"An employee was standing near a pot belly natural gas heater, and his clothing caught on fire.  The employee was admitted to the hospital.",1
An employee walking at the job site slipped on ice and suffered a spiral fracture of the right femur.,1
"On February 27, 2015, an employee severely injured his finger while moving a 50-pound vise in the Rack Maintenance Area. The employee crushed the upper portion of the right pinky finger. Medical providers removed the untreatable portion of the finger between the first and second knuckle.",0
"The employee was attempting to rework the alignment on a seam in a rolled metal cylinder when the spot welds broke. The metal struck the employee, resulting in a fractured left leg and numerous fractures to both feet.",1
An employee fell approximately 8 feet from a ladder while climbing to install satellite equipment. The employee broke both ankles and an index finger.,1
An employee was standing on top of a pallet while stocking shelves. The employee fell from the pallet to the ground and broke her hip. The employee was admitted to the hospital.,1
"An employee was walking through the shop, tripped over a curb, and fell backwards.  He hit his head on the floor, sustaining a concussion and three fractured ribs.",1
"Employee was polishing stem using two feet of polishing cloth when the cloth and the employee's glove got caught in the rotating stem. The employee's left hand was pulled into the stem, resulting in a left thumb amputation.",1
"The employee was operating a 6-inch vacuum hose in a sump. The hose kicked back, knocking the employee to the floor. He broke three bones in his right ankle. The employee was hospitalized overnight and required surgery.",1
An employee was helping to remove reflective pavement markers when debris caused by the sledgehammer hitting the marker struck the employee's eye.  The injured employee was wearing safety glasses.,1
"While disconnecting the chain from the connecting point of the hangar door, the employee's left pinky got caught between the chain and the door. The tip of the pinky and the top part of the nail came off.",0
"An employee was delivering mail to a residence. The mailbox was mounted to the outside of a fence near a gate. A pit-bull/boxer mix that was inside of the fence jumped on the gate, causing it to open. When the dog attacked the employee, she put up her right hand and the dog bit it, resulting in broken bones. She was hospitalized.",1
"The employee was driving the powered industrial truck, stacking product on the top of the third pallet. The employee stacked the pallet and put the forklift in reverse. The employee then placed the forklift in forward, assuming that the forks were still elevated. The forklift fell on its side, causing the employee to break an ankle.",1
An employee's fingertip was amputated in the workplace.,0
An employee working on a scoring machine amputated his right pointer finger up to the first knuckle.,1
"An employee had the left index fingertip amputated while trying to clear a jam from the tissue paper convertor machine on February 27, 2015, at 2:00 pm.",0
An employee was struck by a piece of facade and hospitalized.,1
"An employee was cutting siding into 2-inch strips using a circular saw on a saw horse. The strip started to buckle; the employee reached to grab it, cutting the palm at the finger joint.",1
An employee amputated his fingers while using a saw.,1
"Employee was attempting to remove meat/fat particle from an auger with a stream of water. The employee then attempted to remove the particle with his hand. While attempting to remove the particle, the employee lost the middle finger on the left hand.",1
Mail carrier slipped on ice and fell breaking her left ankle. She was wearing spiked shoes at the time of the incident,1
"The employee was helping a truck driver adjust the rear tandems on his tractor trailer.  The employee was under the trailer attempting to adjust the tandems when they slipped forward, pinning is left arm at the elbow area between the trailer and the tandem.  The employee was taken to Creighton University Hospital where doctors amputated the arm midway down his left bicep.",1
Employee inhaled muriatic acid.,1
Employee slipped on ice and fell while crossing the street. Employee broke two ribs and punctured a lung.,1
Employee fell at the jobsite trailer and sustained a leg fracture. The employee was admitted to the hospital.,1
A worker slipped on ice and fell walking from his mobile crane to the office.  He sustained a broken right ankle and was hospitalized for two nights.,1
"An employee was attaching a compressor to a skid with a pneumatic impact driver. The employee's finger got caught in the driver, which tore off his fingertip; the injury did not involve the bone.",0
"An employee pulled a car around for customers. The customers got in the car. The employee was preparing to close the door when a blue VW ran into him and the car, dragging him 90 feet and then running him over.",1
"The employee helped finish installing deep foundation and began disassembling equipment at the site. While dismantling the crane, the employee used a hammer to knock a pin from a boom to disassemble it. The boom fell on the employee, resulting in an in-patient hospitalization and injuries to the wrist, both ankles, and the leg, as well as a possible back injury.",1
"An employee was injured while unhooking a truck from the wrecker, requiring hospitalization.",1
"An employee dismounted a powered industrial truck before it came to a complete stop. The employee's foot became wedged between the skate rail and was rolled onto by the vehicle, resulting in a crushed ankle.",1
Employee was walking outside near the engine room office at National Beef when he fell on the ice/snow and broke his tibia and fibula bones.,1
"An employee was conducting a snowboarding class lesson on the ski slope when a customer on a snowboard collided with him, causing serious injuries.",1
An employee fell off of a ladder and struck their head on a concrete floor. The employee was hospitalized.,1
An employee fell while skiing and broke their tibia bone.,1
An employee was grooming a cat with a nail trimmer when the cat bit the employee. The employee was admitted to the hospital for an infection between the hand and index finger.,1
Employee was using a band saw in the commissary's butcher shop area to process meat for resale when he amputated the tip of his left thumb.,0
An employee performing roofing work fell approximately 12 feet.  He was laying down substrate at the time of the accident in preparation for the placement of roof shingles.,1
An employee was cleaning out a scrap box. The employee waved to the PIT operator to reverse. The operator started to reverse when his foot slipped. The PIT moved forward and pinned the employee between the scrap box and a guardrail.,1
An employee on a ladder was moving a box of meat from a storage rack when he twisted and reinjured his back. He fell approximately 2 feet and was admitted to the hospital for back treatment/possible surgery.,1
An employee was setting up a demo cart and preparing for a food demonstration. She turned and tripped on the rubber mat causing a fall that broke her hip.,1
"On 3-1-15 at 12:30 pm, an employee operating a manual vegetable dicer amputated the left index fingertip. The fingertip was pinned and reattached.",0
"An employee was inserting new pumps on the landing gear of an airplane. When the employee dismounted, he felt pain in his back.",1
"On or about March 1, 2015, an employee sustained an amputation injury to the left middle finger while unjamming a snow blower.",0
"On 3/1/15, an employee was struck by a passenger vehicle in a roadside work zone, resulting in an amputation.",1
"An employee was draining condensate out of the treater line when a flash fire occurred, causing second degree burns.",1
An employee amputated approximately a quarter of an inch of a fingertip and also lost part of another fingertip on the same hand.,0
An employee amputated his fingertip while sharpening a chisel.,0
An employee's left ring finger broke due to being smashed between two parts of a dumper food processing machine. The employee was hospitalized and had surgery.,1
Employee slipped on ice and fell striking the head. ,1
An employee working in the store was injured when a vehicle struck the building.,1
"An employee got struck by an ""I"" beam and fell approximately 4 feet.",1
An employee was lifting a pipe into place with a hoist. The pipe came loose and caught his right hand between the pipe and a fusion machine. The pipe was rigged with a choker but not shackled.  The employee's right little finger was crushed and he was hospitalized.,1
An employee was working on a pipe with a breakout wrench when it slipped and severed his left ring fingertip.,0
"An employee tripped and fell, striking his head against the corner of the house. He was admitted to hospital for head lacerations and overnight observation.",1
An employee engaged in roofing activities fell through the roof. He was transported and admitted to Kendall Regional Medical Center in Miami.,1
"An employee was completely engulfed by silage at the entrance of an outdoor silage bunker. The employee sustained a spinal vertebra fracture, right hip fracture, and head laceration.",1
An employee walking to the break area slipped on mud and fell onto the concrete floor breaking his right femur.,1
"An employee was emptying the contents of an aerosol can. The aerosol can ignited and burned the employee's hands, forearm, neck, and lower part of face.",1
An employee was cleaning the units on the second floor when he stepped on a loose platform close to the forklift and fell 10 feet to the ground. The employee was hospitalized with a broken right elbow and had surgery.,1
Employee was cleaning the press filter when he got pinned against a rack by a forklift.,1
"An employee arrived at the facility early in the morning and was shoveling snow off of the front walk when he stepped on some ice. He tried to catch his fall, but the weight of his body broke the lower portion of his left leg. He was hospitalized.",1
"The employee was leaving work. While boarding the shuttle, the employee missed a step and fell, fracturing her right clavicle.",1
"An employee had delivered new appliances and was loading the old appliances onto the truck.  The employee's left middle finger caught in the tailgate, cutting through tendons and part of the bone.",1
"An employee's right index fingertip was amputated on March 3, 2014. The employee was taking down operating room lights at OSU East Hospital. When the employee went to set the light down on the ground, a spring snapped on the light and caught the employee's finger.",0
An employee was assembling a metal part to a frame when the sheet metal dislodged and cut a tendon above the cut-resistance glove on his arm.,1
"An employee was removing a pump from a roller machine. He took his gloves off to remove bolts. The 86-lb. pump slipped; he went to grab it, and his finger was sheered off between the pump and the frame of the machine.",0
"An employee was on a 6-foot fiberglass stepladder, pulling wire through a conduit for a 24-volt DC fire alarm system. The employee fell off of the stepladder and suffered a head injury and broken rib.",1
Employee was hospitalized after cutting his finger while operating a water-jet cutting machine.,1
The driver of a front-end loader waste dump truck fell from the top of the truck to the pavement and was hospitalized with a broken neck.,1
Employee was pulling copper out of the copper shear when he felt pressure on his left thumb finger. His fingertip was cut when he tried to pull his thumb out.,1
"Around 7:30 PM, an employee tripped over a rope and fell on his right arm. The employee complained about pain on his right elbow and was hospitalized.",1
"A telescopic Kelly bar dropped on an employee's hand while he was digging a hole with an auger, crushing his left index finger.",1
"An employee notified the press operator that he was ready for the press table to be lowered. As the table was lowering, the employee leaned over on the table; his first, right-hand finger got caught between the die strap and the table.",0
An employee was working from a step ladder to install cable at a bank when the ladder slipped out from underneath him due to snow and ice on the walkway. He broke his leg and was admitted to the hospital.,1
"An employee slammed his left ring finger while attempting to close his truck's double doors.  An approximately 1/4"" piece of his left fingertip was amputated (flesh only, not bone), and he sustained a minor fracture in the same fingertip.",0
"An employee was placing plugs into tank bushings. The tester operator actuated the test sequence, causing the safety door to close while the employee's hand was in the door. The employee's left ring finger was amputated halfway down to the fingernail.",0
An employee shoveling snow outside of the facility slipped and hit his head.,1
An employee operating a tail stretcher machine sustained a partial finger amputation. The employee's fingers were not guarded and the left index fingertip was smashed.,0
"On 3/02/2015, an employee was working in the freight sorting building on an outbound slide. At approximately 8:30 PM, the employee was sorting freight when she tripped on the edge of a floor mat that was slightly elevated, falling on her right hip. The employee was hospitalized and had surgery.",1
An employee's finger was amputated when a piece of unsecured plywood slid off of a forklift and smashed the left-hand pinky finger between two plywood stacks.,0
An employee driving a forklift collided with a second employee who was driving a forklift with a pallet attached to it. The employee injured the left foot.,1
An employee slipped on a wet floor and fell.,1
An employee was fitting plating when the plating shifted and crushed the third and fourth digits on the right hand. The employee was taken to the emergency room where pins were put in.,1
"On or about March 02, 2015, an employee suffered multiple fractures to her right arm requiring hospitalization after being caught in a rolling conveyor.",1
"An employee received burns to his face, head, and chest while refueling a motorhome with propane.",1
Employee's hand got caught between a belt and sprocket during startup operations. The employee was hospitalized.,1
"The injured employee was standing halfway up a fold-down attic ladder, receiving instructions on what materials/equipment would be needed to fully repair the attic heater. While descending the ladder, the employee missed a step, fell, and fractured a vertebra in the thoracic area of the back.",1
"On March 2, 2015, an employee entering his office from outdoors fell and fractured his hip.  The employee was hospitalized.",1
Employee's right ring finger was amputated by the blade on the meat-cutting machine.,0
Employee was walking into work in the parking lot and slipped on ice and fell striking the head.,1
An employee was attempting to get a ride on a sit-down forklift from another operator when he fell off the side of the forklift. The rear wheel ran over the injured employee's leg.,1
"An employee was working on the third deck. As he was using a ladder to come down, he fell and sustained an injury.",1
Employee on the roof was checking a stand pipe and slipped and fell breaking a hip.,1
"An employee was returning to the work area when a truck driver lost control, drove through the parking lot, and struck the building where the employee works. The employee was pinned under the truck and building debris.",1
An employee working on the production line between the window washer and the oven received a severe injury when the employee's arm was pulled into the conveyor system by the employee's smock waist strap.,1
"Employee fell on ice while delivering mail, resulting in a broken leg and displaced ankle joint.",1
An employee was loading trash into the back of the garbage truck when he was struck by a drunk driver.,1
An employee was taking a Rhesus monkey out of the rig. She was unfastening the last head post when the monkey bit her right small finger.,1
Two large metal doors that swing inward/outward were being closed to perform high-pressure tests on the SB-BOP. The injured employee's left index finger's distal phalanx got pinched/stuck between the doors while closing them. The employee jerked the hand away and sustained an amputation (no bone removal) to the finger.,0
"An employee was working in the edible cutting section using a conveyor fed belt saw. His thumb made contact with the saw blade, removing the tip of his left thumb halfway down the thumbnail.",0
Employee was in a car accident while delivering food.,1
Employee got his finger caught in a machine.,0
An employee climbing a ladder fell 12 feet and injured his right wrist and both ankles.,1
"An employee was inspecting a tooling knife on a slitting machine. The employee fell into the machine when it was jogged forward. His left foot was degloved up to the ankle, and he broke numerous bones. He was hospitalized and required surgery.",1
An employee was injured on the harvest floor while opening shanks. The employee suffered a laceration to the right forearm and was hospitalized.,1
"An employee was using a ladder, missed a step, fell, and fractured his leg.",1
The employee was salting the sidewalks and slipped on ice and fell resulting in a fracture.,1
An employee had just retrieved a full 30 lb. propane tank from storage and was walking and carrying the tank to place it on a forklift truck. The employee slipped on ice and fell breaking his fibula and tibia bones.,1
"An employee was unloading a trailer using a forklift. While reversing the forklift, the employee struck the dock door, fracturing the left thumb.",1
Employee's left hand got caught in a conveyor belt and pulley while increasing the tension. The employee's left index finger was amputated.,1
An employee was shocked when he pushed the start button on a vibrator to shake material out of a bin. He fell back onto a 32-inch highway concrete barrier and hit his right shoulder and left cheek.,1
"On 3/3/15, an employee slipped on ice in the parking lot and fell.  The employee was immediately taken for medical treatment where X-rays showed a broken right arm or humerus.  The employee was scheduled to see an Orthopedist on 3/4/15.  Following the appointment with the Orthopedist, the employee was admitted to the hospital for surgery on her broken humerus.",1
Employee slipped on ice in a customer's parking lot and fell resulting in two broken ribs and a punctured lung.,1
One employee fell and struck his head against a tree stump.,1
An employee slipped or tripped when bending over to pick up metal studs from the storage area.  The employee fell onto the pile of metal studs and received a laceration that resulted in a hospitalization and surgery to repair the tendon.,1
An employee was struck by falling blocks from a crane.,1
"Employee fell approximately 4 four feet from the top of a precast concrete wall, injuring his head and fracturing his ribs.  Sleet was a contributing factor.",1
"An employee was moving equipment when she tripped over equipment cord, hitting her face on a shelf.",1
"While in the parking lot, the employee slipped on black ice and fell on her back resulting in skull fracture.",1
The injured employee's hair got caught in the unguarded belts of a die-cutting machine as he was making an adjustment to the machine. His hair and scalp were removed.,1
"Molten metal spilled from a ladle onto an employee's left foot, causing burns and hospital admission.",1
An employee was cleaning a pump near the marination mix tank. She removed the piping but did not remove the cover and reached into the opening. She felt the sharpness of the impeller and quickly withdrew her hand. The distal portion of the third finger on the left hand was amputated.,0
A robotic arm pinned an employee's head to a CNC machine while he was performing maintenance work.,1
A worker was cutting steel tubing using a band saw. His right index finger was amputated by the blade.,0
An employee fell off of a ladder at a jobsite and was admitted to the hospital after sustaining broken ribs.,1
An employee was hanging a lashing bar on the aft end of the ship. The bar popped out of the corner and pinched the employee's right thumb between the railing and the lashing bar. The thumb tip was severed.,1
"An employee slipped on ice, sustaining a concussion, broken right femur, and crushed knee.",0
An employee amputated the left index finger at the first knuckle while operating a Skilsaw to cut the end of a board.,1
"A maintenance employee was using a drill press when their left pinky finger was caught in a slot on the work bench, resulting in a fingertip amputation.",0
"Employee was walking between the garage and his truck, carrying an approximately 25 lb. cable reel. He slipped on the snow and fell.  He drove himself to the hospital, suffered a hernia and had surgery.",1
"An employee was operating a shaper to mold pieces of wood when a piece of wood got thrown out of the shaper and caused the employee's fingers to make contact with the shaper knife. He lost the first digit of his ring finger, more than half of his middle finger, and his index fingertip to the bone on the right hand, requiring hospitalization.",0
"A safe door closed on the employee's right middle finger. Her finger was bleeding, so she sat down on the chair by the safe. When she stood up, she fainted and fell forward, hitting her face on the computer console on the edge of the desk. She was discovered by a coworker on the floor. The employee broke her tooth. She was admitted to the hospital.",1
"An employee was exposed to steam that contained sodium sulfate, tetrasodium pyrophosphate, and potassium hydroxide while working on an HVAC system in the basement/mechanical room of the hospital.",1
"An employee was delivering a package when ice and snow fell from the roof and struck her. She sustained a fractured ankle, as well as rib and lung injuries, and was admitted to the hospital.",1
"An employee, who was unloading a truck, slipped on ice, fell, struck his head, and was admitted to hospital.",1
The employee was traveling through the shop area in the dark to turn on the lights when she tripped over a lawnmower and fractured her left ankle.,1
An employee slipped on ice and fell suffering a broken wrist which required surgery.,1
Employee was walking between two buildings and slipped on a side walk and fell landing on her knee.  ,1
"On March 4, 2015, an employee spreading ice melt slipped on ice and fractured his right ankle.",1
"An employee was using a come-along while performing maintenance on the leaf springs of a bus. The come-along slipped out of position and struck the employee in the right temporal lobe area, resulting in a deep laceration and fractured skull.",1
"On Monday, March 2, 2015, at approximately 7:00 pm, an employee was operating a blow molding machine. The employee reached past the guard, and the machine cycled and smashed four fingers on the employee's right hand. The employee sustained an amputation of the fourth digit, partial amputation of the fifth digit, and a full thickness burn to the right middle finger. The employee was admitted to the hospital.",1
An employee injured his wrist and head when he slipped on a three-rung ladder. He was admitted to the hospital and treated.,1
An employee sustained head injuries when he fell 54 inches off the back end of a conveyor load truck and landed on the concrete.,1
An employee fell from the third floor to the second floor when his foot got stuck on a pallet. He fell with the pallet to the second floor. He broke his femur and was admitted to the hospital and treated.,1
An employee amputated a fingertip while attaching a tandem trailer dolly to the first trailer's pintle hook.,0
An employee fell through the roof while inspecting the wood to see if it was rotten. He injured his lower lumbar.,1
"An employee was prepping a recreational race course surface by side-slipping his skis.  The employee caught his downhill ski edge and fell, fracturing several ribs and rupturing his spleen.",1
"An employee pushing the breakfast cart across the street from the church kitchen to the school slipped on ice and broke his left ankle, resulting in hospitalization and surgery.",1
An employee's finger was caught between two flange faces while manually positioning a portable pipe skid.,1
An employee suffered an amputation of his index fingertip when he tried to unjam the bagging machine.,0
"An employee was using 2-inch, clear packaging tape to secure boxes on a pallet. He inhaled a small piece of the tape while cutting it by mouth, and the tape adhered to a portion of his mid-to-upper throat. He was admitted to the hospital and underwent treatment.",1
"An employee was hand washing an aluminum casting at the ""hand wash cabinet"" (machine) using 3,700 psi water pressure to remove ceramic materials from the casting. The employee was wearing hand protection (double glove with inner neoprene and outer cut-resistant Kevlar with neoprene coating). The employee suffered a water injection injury to the right middle finger, requiring overnight hospitalization and surgery at Barnes St. Peters.",1
A maintenance employee slipped from a railing 18 inches from the floor and fractured his elbow.,1
Employee was standing on the second floor dismantling a metal mod structure when he fell through the sheet metal and cut his left arm to the bone near his elbow. He was wearing fall protection and did not impact the floor but suffered the cut on the way down.,1
"An employee was struck and run over by the front left tire of a rough terrain forklift. The rough terrain forklift was carrying a load of logs, and the forklift operator was driving towards the scale.  The injured employee was hospitalized.",1
Employee sustained an amputation of the right pinky fingertip while loading a wooden reel onto a pack line. His right little finger was crushed between the flange and the reel.,0
"The employee reached into a poultry skinning machine to push meat through. The metal mesh glove she was wearing became caught and pulled her hand into the machine, amputating her middle fingertip and nail.",0
Employee fell suffering 3 fractured ribs and a collapsed lung.,1
"On March 4, 2015, an employee was hospitalized due to an electrical shock.",1
An HVAC maintenance employee was descending five flights of stairs when he slipped and/or lost his footing and fell. The employee sustained fractured ribs and was hospitalized. The employer stated that snow and ice were contributing factors.,1
The employee was carrying a piece of plywood on the second floor of the residential structure. The employee fell over the edge approximately 8 feet. ,1
An employee fell 6.5 feet from a piece of equipment while installing an exhaust hood.,1
"On March 04, 2015, at approximately 4:30 p.m., two employees were preparing to depart the construction area due to rain. The injured employee went to retrieve his wallet from his lunch pail in the back of the truck they were going to drive. While he was in the back of the truck, a Porta John truck was reversing and sideswiped him between the two trucks. The employee was admitted to Odessa Medical Center Hospital.",1
Employee cut his hand while moving a glass tabletop from a storage container to a garbage dumpster.,1
"An employee walking down the stairs missed the last step and fell on the floor, fracturing her hip.",1
"On 3/5/15 around noon, an employee fell approximately 8' from a ladder when the ductwork he was releasing swung down, hit the ladder, and rocked it. The employee sustained two left arm fractures (wrist and elbow) and a possible pelvis fracture. The employee was transported to ECMC where he was treated and released.",1
An employee suffered a leg fracture after slipping and falling approximately four feet off a damp platform.,1
Employee slipped on ice in the parking lot and fell.,1
An employee was raking dirt behind a skid loader; the operator did not see him and ran him over. He was transported to the hospital.,1
An employee slipped on ice and fell injuring his left ankle.,1
"On March 5, 2015, an employee was hospitalized after suffering a foot injury on the job. The employee was standing next to a trench at ground level while lowering a concrete pipe into the ground when the pipe struck the employee in the leg.",1
Employee was struck in his back with a chain while walking behind a vehicle-mounted drilling rig.,1
"Employee slipped on snow and fell, breaking his ankle in three places.",1
"Employee was cutting the butt end of a utility pole with a chainsaw . The chainsaw made contact with the employee's foot, which was near the point of operation, resulting in severe laceration and broken bones.",1
"An employee was using a forklift to unload sprinkler pipes that were 2 to 4 inches in diameter, roughly 19 feet long, and came in bundles weighing 1,800 to 2,000 pounds. The pipes were delivered on a straight truck. The employee was only able to unload the bundles from one side. The last bundle was 6 inches away, so a lever was used to try and move the bundle towards the forklift. One of the support lumbers shifted, causing the employee to jolt his back.",1
Employee slipped on ice and fell in a customer parking lot.  The employee will require surgery to repair a broken leg.,1
"An employee was conducting repairs on the horizontal expander. The equipment was not locked out. The gear energized and crushed his left index finger, resulting in a fingertip amputation.",1
"An employee fell from the second floor, at a height of approximately 10 feet, while installing sheetrock. The employee did not have a personal fall arrest system at the time of the accident.",1
An employee was cleaning a grinder when the grinder blade dropped on his left hand. The employee pulled his hand out of his glove and amputated his left middle fingertip.,0
"An employee cut his ring fingertip while operating a bottling machine, resulting in a finger amputation.",0
Employee sustained partial amputations of his right-hand index and middle fingers when his hand got caught in a nip point while operating a ball former.,0
"An employee was being trained to operate a forklift when he lost control, bumped a guardrail, and broke his lower right leg.",1
An employee partially amputated his left-hand middle finger when his hand got caught between the forklift he was operating and a vat dumper safety bar.,0
"The injured employee was auditing inventory/scanning freight using a ladder. The employee was holding on to the ladder with the right hand and held a telxon in the left hand. While descending the ladder, the employee missed the third step and fell approximately 4 feet to the ground. The employee landed on the left leg, breaking it in several places.",1
An employee was injured on 3-5-15 at 5:00PM when the employee slipped on ice and fell in the parking area. The employee was hospitalized and surgically treated for a foot/ankle injury.,1
"An employee was installing decking on top of bar joists and welding it in place. A piece of decking was not adequately supported by the bar joists. The employee stepped on that piece, which caved in under his weight, and fell about 12' onto the concrete ground, resulting in a hospitalization.",1
An employee fell from a bicycle while patrolling the park and was hospitalized.,1
"On or about March 5, 2015, an employee suffered fractures to both feet after falling approximately 6 feet during a training exercise (mock drill - high angle rescue).",1
An employee was performing carpentry work using a nail gun to nail bracing for a new residential dwelling's soffits. He was descending the ladder when the nail gun bumped the ladder and discharged a nail into his kneecap.,1
The employee was walking on the south side of the facility and slipped on slush and water and fell suffering a fractured hip. ,1
Employee fell on ice when walking across the parking lot.,1
"At approximately 3:30 AM on March 5, 2015, an employee cleaning a pit was pushing mud toward a vacuum hose when he felt a pull in his groin area. A supervisor and employees aided the employee who exited the pit and, upon further examination, determined that a hernia had occurred. The employee was admitted to the hospital and required surgery.",1
The end of an employee's left-hand middle finger was amputated by an unguarded hole punch machine.,0
An employee was moving a piece of steel into place for rigging. The piece crushed his fingertip and required closure by a physician. The crushing injury was classified as an amputation.,0
An employee walking down the ramp at a patient's home slipped and sustained two fractures in the left leg.,1
A truck driver slipped and broke his right wrist while dismounting from inside the garbage truck.,1
" An employee slipped on ice, fell and hit his head on the ground of a barn while feeding the horses.",1
"An employee was unloading freight from the back of the trailer with a two wheeled dolly when he slipped on the lip of the trailer, fell to the ground, and fractured his left elbow.",1
 An employee was hospitalized after being intoxicated by carbon monoxide at his jobsite.,1
"An employee working on the picker conveyor was hospitalized after cutting his arm between the wrist and elbow on March 6, 2015.",1
"On 3/6/15 at 4:30 p.m., an employee was trying to move a co-extruder towards the extrusion line to get it back on the extrusion line track. The employee used a pry bar to move the machine forward, while a second employee tried to loosen the wheel. The second employee's right index finger got caught between the pry bar and the machine track.",0
"An employee was struck by drywall sheets, which broke his leg at the knee.",1
"An employee was using a saw that kept clogging with sawdust. The employee placed the vac hose at the bottom of the saw, and the hose was sucked into the bottom. He sustained an amputation to his right-hand index finger.",0
Employee was lifting pipes when the pipes slipped and fell onto the employee's fingers resulting in medical amputation.  ,0
"An employee was welding black iron pipe for stem lines at the new Limited Brands facility under construction in Johnstown, Ohio. The employee left work early due to an extreme headache. He was taken to the hospital where he was diagnosed with carbon monoxide intoxication.",1
An employee was working behind the cash register when she became lightheaded and fainted. She fell and hit her head against the cash register. The employee was hospitalized overnight.,1
A contractor hired to replace an old pipeline damaged it with a backhoe and created a leak. There was a trench about 3 feet deep and 18 inches wide. The injured employee was on scene to evaluate the leak. He moved from one side of the trench to the other. The soil on the opposite side gave way and exposed a tree root; he hit his chin on that root. The employee broke two bones in his left leg about 2 inches from his ankle.,1
An employee operating a chop saw sustained a partial amputation of his finger when the blade caught his glove. The machine guard had not stopped at the time.,0
An employee suffered a partial amputation of the thumb tip while using a table saw.,1
"An employee was caulking a commerical building and fell off a ladder approximately 15 feet. The employee sustained injuries such as a fractured left ankle, wrist, and right tibia.",1
Employee slipped on ice and fell in the parking lot.,1
Employee slipped on ice and fell in the parking lot while walking from the building to the truck. ,1
"An employee tripped over a concrete parking barrier while walking back to the delivery truck, breaking his femur.",1
Employee slipped on ice and fell when stepping out of his truck. He was admitted to the hospital with rib injuries. ,1
"An employee was using a screw gun and handling a metal stud. When he went to put the screw into the metal stud, the tip of the screw gun hit the middle of his hand. The worker was hospitalized and received three stitches.",1
"An employee was injured when the stand-up forklift he was driving hit a parked forklift. One of the parked forklift's forks entered the cab, struck his foot, and cut his foot and leg. He was hospitalized.",1
An employee slipped on ice walking to the car in the parking lot.  The employee was taken to the hospital and had surgery on the left ankle.,1
"An employee slipped on ice in the facility's parking lot, injuring the back of his head.",1
"An employee's hand/fingers were crushed while positioning a wall form, which was being lifted into place by a crane.",1
An employee partially amputated his right middle finger while cleaning a metal bar that separates two pieces of a conveyor belt in the bakery department.,0
An employee broke her ankle when she slipped on ice in the parking lot. The employee was admitted to the hospital for surgery.,1
An employee was unloading a truck with trusses. He was unbanning the metal band on the side of the truck when the band broke and caused a bundle of trusses to fall on the employee.,1
An employee was hit by a Bobcat vehicle and was hospitalized.,1
An employee was walking to the store loading dock when he slipped and fell on ice. He injured his hip and buttocks area.,1
Employee slipped on black ice on the sidewalk and fell while walking from her car to the building to start her work day.  She hit her head and was knocked unconscious.  ,1
"On 3/06/2015 at approximately 9:44 AM, an employee was injured when he lost his footing on top of a 9 foot wall while installing ceiling joists and fell backwards onto the concrete floor below. The employee was admitted to the hospital with a brain injury.",1
"An employee walking across the parking into the hospital slipped and fell on ice, injuring her back.",1
"At approximately 11:00 a.m., employees were working at Manchester Terminal onboard a vessel. Approximately 12 employees were loading  5' x 10' steel plates onto the vessel (BBC Plata). The ship's crane was loading the plates inside the vessel with assistance from the employees. During the operation, two of the injured employee's fingers got pinched between two plates. He pulled away, and his left-hand, middle ring fingertip was partially severed (degloving).",1
"On March 7, 2015, at 3 AM, an employee was cleaning a roller with a rag. The roller was in operation at the time. The rag became entangled and was pulled into the roller, pulling the employee's hand in with it and resulting in an amputation to his right ring fingertip.",0
"An employee tripped over a hose connected to a rail car, fell, and landed on his right hip.",1
An employee was removing a die when another employee started the machine.,1
"An employee was riding on the back of a company pickup truck. As the driver took a right-hand turn, the employee fell off and suffered head trauma.",1
"An employee was working in the small bar finishing area, when he attempted to reach a spray can of lubricant located on the small bar table inside the guarded area. He was using a rod to manipulate the can closer to the guard rail by reaching over the guard rail, when the carry-over arm struck him, pulled him over the guard rail, and dragged him to the floor. The carry-over arm continued its operation as the employee fell below its operation range. The employee received injuries to his shoulder and ribs.",1
"An employee fell from a three-step ladder and struck her head on the floor, resulting in a fractured skull.",1
An employee was loading a trailer with a covered wagon (all-purpose container) when she looked down and saw that she was bleeding. She was wearing gloves. Her fingertip was amputated.,0
An employee was making rounds in the Inmate Housing Unit C when he slipped on wet stairs inside of the housing unit and fell injuring his neck and back. ,1
"An employee had just adjusted a nut on the motorcycle tire-building machine he was servicing. He instructed the operator to put the machine into auto mode. When the employee's hand entered the machine, the beadset (a movable part on the machine) moved forward, and his wrist got caught in a crush point between the beadset and the drum.",1
An employee amputated the tip of the left-hand middle finger while operating a drill.,1
An employee's leg was amputated after being caught in an auger.,0
"An employee was sitting on top of a toolbox while riding in the back of a pickup truck. When the truck made a right turn, the employee slid and fell off the left side of the truck onto the side of the road.",1
The employee slipped on ice and fell while working in the loading and receiving area of the store.,1
An employee was replacing an overhead door recoil cable when the cable tightened and pressed his thumb against the overhead door track.  His left thumb was amputated at the tip of the bone.,1
An employee was struck and injured by another employee's personal vehicle on 03/08/15.,1
"An employee was being trained to operate a stand-up type powered industrial truck, which resulted in the employee's left foot being crushed and lacerated.",1
An employee amputated her left middle fingertip.,1
Employee slipped and fell in the parking lot suffering a broken leg. ,1
An employee fell approximately 6 feet off of a rig structure while nippling up the BOP and broke a tibia.,1
"On March 8, 2015, at approximately 8:08 p.m., an employee disconnected a hose from a cylinder of allyl alcohol. He carried the hose to an area and began cleaning the hose with toluene when he experienced shortness of breath. An air evacuation was requested and the employee was air lifted to the hospital and hospitalized for chest pains.",1
Employee slipped on black ice in the establishment's parking lot and broke his ankle.,1
An employee was using an air nozzle attached to a hose when she tripped and fell over the hose and a T-handle. The employee broke her left ulna and radial bones in her forearm. She was hospitalized and required surgery to repair the broken bones.,1
"On March 8, 2015, at approximately 10:00 a.m., an employee exited the cab of his hydraulic link belt crane and fell 6 feet to the ground. The employee was hospitalized for a possible rib fracture.",1
An employee was hospitalized after his arm got caught between two rollers in the slitter machine.,1
"An employee received multiple burns to his upper body when the T-shirt underneath his welding shirt caught on fire while welding. He received second and third degree burns on his head, neck, back, and right arm. The T-shirt was flammable.",1
An employee was disassembling an HVAC unit on the roof when he fell through a skylight.,1
An employee fractured his hip because he tripped and fell at a construction site.,1
"After resetting an HMI, an employee crawled over a conveyor and reached up to grab the guarding. His wedding ring got caught on the guarding, resulting in the amputation of his left ring finger.",0
An employee was burned while operating a grinder.,1
An employee was on a 12-foot step ladder changing a light bulb in the facility. Another employee drove his vehicle into the building and bumped the ladder; the injured employee fell off and broke both ankles.,1
Employee slipped and fell in the company parking lot on her way to work and broke her leg.,1
Mail carrier slipped on ice and fell suffering a chest injury. ,1
"The injured employee was stepping off of the bus. When he stepped down, he slipped and fell off of the bus step.",1
An employee was hospitalized with head trauma after falling from an 8-foot ladder while attempting to open an overhead valve.,1
"An employee was retrieving equipment out of the janitor's closet, and her foot was propping the door open. Her foot slipped and her finger got smashed in the door.",0
An employee was trying to clean residue off of the trim take-away conveyor motor with a screw driver. The employee's right index fingertip was amputated.,0
"An employee fell 10 feet to the ground from a scissor lift while working on a construction project. Upon impact, the employee broke his nose and other facial bones.",1
The employee was lining up a hole on a planter axle. The planter axle part shifted (overcentered) and severed the bottom portion of the employee's left index finger (pad).,0
"An employee was pulling a unit load device (container) when his foot slipped, got caught on the MB can, and was amputated.",1
"An employee was stepping up into the back of a trailer in the yard to remove trash when she slipped and fell backwards, hitting her tailbone on the concrete ground.",1
"On 03/09/15, at approximately 10:30 a.m., an employee was working from an aluminum ladder that was leaning against a tank. The employee fell approximately 4 feet off of the ladder and landed on a cement barrier. The employee suffered three broken ribs and a bruised kidney and was admitted to UPMC-Presbyterian.",1
An employee amputated his left-hand ring finger while operating a molding press. The safety guard was bypassed at the time of the accident.,1
"An employee was washing dishes when she slipped, fell, and broke her hip.  She was hospitalized.",1
Employee slipped and fell on an icy sidewalk resulting in a compound fracture of the leg. ,1
An employee was running along the road as part of his physical training requirements and was struck by a vehicle.,1
An employee's foot got caught in the unload auger when he entered a grain bin to move a flexible cord.,1
A worker slipped and fell breaking her hip. ,1
Employee fell into an 8' manhole.,1
"An employee severely injured his right-hand pinky finger while changing brakes on a truck tractor.  The tool used to hold tension on the brake components slipped, and the components crushed the finger.",0
"On March 9, 2015, an employee sustained distal amputations of the third and fourth right-hand digits while operating a conical paper cup-forming machine. The employee was feeding paper in order to start production on the machine.",0
"An employee slipped on ice and caught himself while getting out of his truck at the company-owned quarry. He injured his right, lower leg.",1
"Employee slipped and fell from his truck, breaking his hip.",1
An employee was helping to run wire cable onto the boom of a crawler crane when the loose part of his safety harness lanyard got caught in the rotating drum. The drum then pulled him into a pinch point. He was hospitalized.,1
"On Tuesday, March 10, 2015, an employee walking through the blocking department/packing area tripped as she was walking around some boxes. She fell to the floor, sustaining fractures to both of her upper arms. She was admitted to the hospital for her injuries.",1
"On or about 3/10/2015, at approximately 7:00 a.m., an employee was injured on a stationary miter saw, which resulted in an amputation to the left ring finger.",0
"On Tuesday, March 10, 2015, at approximately 6:05 AM, an employee slipped on an icy sidewalk at FCI Allenwood and sustained a severe leg and arm injury. She was hospitalized.",1
"On March 10, 2015, two employees were stocking new cabinets on the shelf using a forklift. One of the employees stepped back and tripped over one of the forks. He fell back and hit his head on a steel beam. He was admitted to the hospital with head trauma.",1
"An employee was cleaning the dryer inlet duct from a ladder and fell, which resulted in a fractured right foot.",1
"An employee was shelving items in the meat cooler when he collapsed and fell from a 5-foot, metal A-frame ladder. He was found on the ground with his feet resting on the second rung of the ladder.",1
"On March 10, 2015, at approximately 1:40 p.m., an employee was using a tag line to guide pipe being moved by a trackhoe operator. As the pipe was turned near the well pad, the employee tripped and fell on the blind side of the trackhoe. The trackhoe ran over the employee's left leg, resulting in hospitalization and amputation.",0
"On or about 1555 hours on March 10, 2015, the right intermediate and distal phalanges of an employee's middle finger were amputated after his finger got caught in the pulley of a winch he was operating. The employee was holding the winch cable with his right hand due to a kink in the line and operating the winch with his left hand when his hand was pulled into the pulley. He was hospitalized and the phalanges were surgically removed.",0
An employee was exiting a 15-passenger van when the van moved forward while he was in the doorway. He fell out to the ground and injured his back and left leg.,1
"An employee was conducting pressure testing on a vertical pipe when the pressure blew the cap off, causing it to hit his nose. He was transported to the hospital to receive medical attention.",1
An employee fell and fractured her ankle while walking in the parking lot. She was hospitalized and had surgery.,1
An employee was disconnecting chlorine gas system tubing to attach a chlorine cylinder to the water treatment system when a small amount of chlorine gas escaped. The employee was taken to the hospital and admitted.,1
"An employee was offloading a unit train when a rail genie ran over his left elbow, causing a laceration and muscle tear to his left bicep.",1
An employee was working on a pallet dismantler machine when he reached his right hand into the machine to remove a piece of wood that was causing a jam. The tip of the employee's right thumb was amputated.,0
"On March 10, 2015, at approximately 10 a.m., an employee fell down a flight of stairs during work and injured his back. He fell approximately 10 feet from the second floor to the first and was taken to UAB Hospital.",1
"An employee was walking in an office when he tripped over another employee, causing him to strike the corner of a desk and break his hip.",1
"An employee installing gutters fell off an 8 foot step ladder onto the ground (concrete pavers) below.  The employee suffered a fractured hip, which resulted in an overnight stay in the hospital.",1
An employee attempting to remove a quick-release mechanism suffered a fingertip amputation from a spring-loaded pin in the opening where his finger was inserted.,0
"An employee was on a pallet set on top of the Daewoo forklift's forks in order to store furniture on the mezzanine. He fell 14 feet to the ground, fracturing his collar bone and lower back and sustaining trauma to his head.",1
"On or about 3/10/2015, at approximately 9:30 a.m., an employee was seriously injured when a diesel engine fell and struck the employee in the head. The employee was transported to the hospital with a skull fracture.",1
Employees were overexposed to carbon monoxide during agency operations on 3/10/15.,1
An employee's left third and fourth digits were amputated while removing a jam from an extrusion line shear.,0
"An employee was moving a chute on the bone and cone line when his right thumb got caught between the wrench and the chute, amputating the thumb tip. The machine was operating at the time.",0
An employee was hospitalized overnight for observation after she slipped on ice while entering the building and broke her ankle/leg.,1
Worker was sitting on top of a railroad tank car changing a threaded valve. He slipped and fell approximately 11 feet to the ground below  striking his shoulder and lacerating his forhead requiring three stitches and five staples to close.,1
Employee slipped and fell approximately 20-30 feet while descending a fixed vertical ship's ladder fracturing the left ankle. ,1
An employee installing electrical conduit in a room with sodium hypochlorite piping fell from the ladder that he was working on and onto the piping. The hazardous chemical splashed on his left leg and arm. The employee was admitted to the hospital.,1
"An employee was tracking and training a belt. After replacing a roller on the conveyor, the employee contacted the rotating part and became entangled in the equipment. The employee suffered injuries and was admitted to Mercy Hospital in Clinton, Iowa.",1
"While lowering sheets of plywood, an employee's finger got caught between a piece of the plywood and the scissor lift.",0
An employee partially amputated the pinky finger.,1
An employee delivering packages injured a knee while walking in a snow-covered area.,1
"An employee who was unloading pallets tripped on plastic packing at the same level, fell, and broke his right hip.",1
"An employee was working on a salt auger when his arm got caught in it, causing an injury.",1
"An employee was injured while cutting rebar with a Quickie Saw. The saw kicked backed, striking him on the right side of the face. He was hospitalized and required surgery.",1
An employee was coming down from the roof in a caged ladder when he lost his footing and fell to the ground below.,1
"An employee was using a 7 1/4 inch circular saw to cut the ocean's flooring when the blade lacerated his right thigh, requiring stitches.",1
An employee was injured by a falling box.,1
An employee was hospitalized after she injured her right hand and forearm while working on the Neidburg belt sander.,1
An employee fell 14 feet through a hole in the floor. The hole was unguarded at the time of the incident.,1
"An employee was unloading a bin of auto parts. The rack fell on the employee, trapping his leg and chest underneath.",1
An employee was moving heavy weight out of a truck to conduct ladder testing when the weight started to fall. His fingers were amputated as he tried to control the weight's fall.,1
"An employee was retrieving a pallet jack. As she stepped over it, she tripped and fell to the floor, fracturing her right femur. She was admitted to the hospital.",1
"A 3-foot x 15-foot steel concrete form was being stripped. During the stripping, the form fell onto the employee's leg and broke it. The employee was hospitalized and required surgery.",1
"An employee was putting raw material into a rubber mixer. The shaft on the ram broke, causing the ram to drop down and crush two fingers on the right hand.",0
"An employee went to measure a concrete beam that had been removed from the ground with an excavator.  The beam, which had been supported on the excavator bucket, fell onto the employee's right foot and crushed it.",1
A maintenance employee completed a roof inspection and was descending a ladder. He fell from the fourth or fifth rung and fractured his pelvis and elbow.,1
An employee disconnected a crane that was holding a 3000-pound die. The die tilted over and fell on top of the employee. The die was not bolted in place at the time of the incident.,1
"An employee was changing a Dayton-style wheel. While removing the lugs, the employee hit the tire with a hammer and loosened the wheel. As the employee removed the last nut, the tire blew out, becoming a projectile that hit the employee in the face.",1
"An employee was unloading a boxed delivery truck using an electric pallet jack. As he was exiting with a load, the truck's roll-up door lowered and struck his left hand. He was hospitalized with a left-hand laceration.",1
An employee's lower left arm was amputated.,1
"On 3/11/2015, at approximately 8:30 AM, an employee was injured when the tank load he was unloading  shifted on his forklift. His finger got caught between the forks and the load when he reached in to secure it. He was taken to the hospital and received surgery.",1
"An employee was removing items from a cupboard. When she turned around, she tripped and fell over a child who was crawling on the floor, resulting in a broken hip.",1
"An employee was using a shovel to clear the conveyor. The shovel got caught in the scraper, which pulled both the shovel and employee's hand into it.",1
An employee sustained a partial amputation of a left-hand finger while operating a table saw.,1
"At approximately 8:30 a.m., on March 11, 2015, an employee was struck on the face by a battery spreading beam. The employee was hospitalized at Strong Memorial Hospital with a broken nose and fractured cheekbone.",1
An employee was stabbed and seriously injured by an assailant in a hotel guest room on 3/11/15.,1
An employee installing insulation from a catwalk fell through a gap in the catwalk and suffered a thigh contusion.,1
An employee suffered a finger amputation when his finger made contact with a moving fan belt on the aerosol air system control fan.,0
"At approximately 3:00 AM on 3/11/2015, an employee was injured while trying to avoid an animal in the road. His truck swerved, and the tires got caught on the soft shoulder, causing the semi-trailer to roll over. He suffered three broken ribs and a punctured lung.",1
An employee injured a leg while climbing a vault's fixed ladder.,1
An employee amputated two fingers on a glue spreader.,0
An employee was hospitalized and had his right thumb amputated after his hand was injured in the cooling fan of a chiller unit he was troubleshooting.,1
"A maintenance employee slipped while clearing a jam and reached for something that crushed his hand. His left pinky finger was amputated, and he broke and lacerated his third and fourth fingers. He was wearing gloves at the time of the incident.",0
An employee was injured when an I-beam rolled onto his leg.,1
"An employee driving a tractor with an attached dirt pan struck another employee who was driving a tractor with an attached dirt pan. The employee was thrown out of the back window of the tractor and landed on the ground unconscious, resulting in hospitalization.",1
An employee amputated his pinky and thumb while cutting wood on a table saw.,0
"An employee fell as he was exiting his truck. To avoid falling backwards, he reached to brace himself with his hands, but ultimately fell to the ground below. He fractured both wrists.",1
An employee was hospitalized with left-foot injuries that occurred while manually repositioning a dock-leveling plate.,1
"The company had identified that an underground short was occurring on a 7,200-volt line. The company was attempting to locate the short using a DC charge unit known as a ""Thumper."" The Thumper would shoot a charge through the line, and the employees would use equipment to triangulate the approximate location of the short. During one of these tests, a charge was sent through the line, and an employee received a shock severe enough to require hospitalization.",1
An employee loosening a bolt with an open wrench fell and was injured when the wrench slipped.,1
"After installing a new utility pole, an employee fell approximately 30 feet to the ground while climbing to the top. The employee was hospitalized with a fractured vertebra.",1
The injured employee fell from a highway bridge that was under construction on the state road. He was working in an area where two beams met when he fell approximately 20 feet and landed on a toolbox that was on the back of a welding truck. His safety line was unhooked at the time of the incident.,1
"An employee slipped and fell to the same level, breaking a tibia, fibula, and ankle.",1
"The injured employee was preparing to disassemble a meat grinder to clean it. The injured employee unplugged the meat grinder when he unscrewed the collar. The die was tightly fit and he was unable to remove the die and blade. The injured employee plugged the grinder back in to bump the power and then reached down to remove the die. His shoulder hit the power-on switch, amputating his right middle fingertip, which came in contact with the blade.",0
"On or about 3/12/15, at 11:00 a.m., an employee working at a facility shop was using a shaper machine to perform job tasks when his hand made contact with the blade inside the machine. He was admitted to the hospital and had surgery due to lacerations on four left-hand fingers.",1
An employee was grabbing a tube from a bender when the employee's right pinky finger was smashed between the clamp-block and the radius-block and tube. The right pinky fingertip was amputated.,0
"An employee carrying a pipe from the building slipped on black ice. The employee suffered multiple facial fractures, internal cranial bleeding, and loss of consciousness.",1
"An employee was walking along the path when she slipped on ice and broke her arm. The injury resulted in a compound fracture, hospitalization, and surgery.",1
An employee was unloading fuel into a tank at a customer location. He was walking while offloading and talking with another employee when he lost consciousness.  A local bystander attempted CPR. Employee was taken to the hospital.,1
"An employee fell off of a one-story metal roof, breaking multiple bones and requiring hospitalization.",1
"An employee was using his finger to align the barrel of a gun while another employee applied pressure. The barrel slid into place, and the finger used to align the barrels was amputated.",1
An employee performing baton training received a rotator cuff tear and was admitted to the hospital.,1
An employee amputated his left thumb at the distal joint while using an overhead gantry crane. His thumb got caught in a pinch point between a metal plate weighing approximately 300 pounds and the lifting frame when a magnet holding the plate failed.,1
"An employee operating a forklift was unable to stop the forklift from moving. His hand reached out of the cage to try to stop the lift. When that didn't work, he pulled his hand back in and realized it was injured.",1
"An employee was using a rail mover to move three railcars. An employee on the ground was assisting him, and the two were communicating via radio. The employee on the ground became trapped between two of the railcars. He was taken to the hospital (Erie County Medical Center) with a non-displaced sacral fracture and torn cartilage in his pelvic area.",1
Employee fell down a single step coming out of a meeting and broke a hip.,1
"An employee lost consciousness and fell on the same level onto a concrete floor, injuring his head. The employee was hospitalized.",1
"A carpet roll fell from a forklift onto an employee in the warehouse. The employee injured his ribs, legs, and back and was hospitalized.",1
An employee was walking down the stairwell of the hospital parking ramp when she slipped on black ice and fell.,1
"An employee was using a table saw to cut wood when his left thumb made contact with the saw blade, causing a partial amputation.",0
An employee's leg got caught between the pallet jack the employee was operating and the wall near the batter area.,1
"Employees were building transmission power lines at the site location. They were changing out the cross arm of the power line structure and had the cross arms supported with two slings and a crane.  The injured employee removed the bolt that  held the cross arm onto the pole.  He rested his hand on the edge of the bucket he was working from; the cross arm slipped, landed on his hand in the sling, and pinched his finger between the cross arm and the bucket. His fingertip flesh was removed.",1
An employee's right ring finger was smashed between hydraulic tongs and a truck bed while running rods. The employee lost the finger from the nail to the end. The employee was transported to the hospital and treated.,0
"An employee driving a cart (similar to a golf cart) struck an oncoming forklift, causing severe internal injuries.",1
An employee severely cut his finger while cutting meat with a band saw.,1
"An employee was working on the back of a garbage truck and saw a piece of metal. When he reached in to retrieve it, his hand got caught in the compactor.",0
"An employee passed a barricade in order to help seal an oil leak on the top cover plate of the transformer. While retrieving material that was dropped from the top of the transformer, the employee stepped into a hole in the grating and fell approximately 3 feet, landing on an I-beam.  The employee was admitted to a hospital and treated for broken ribs.",1
"An employee was walking from a concrete sidewalk to a gravel area with a client. She tripped on gravel and rolled her left ankle, breaking it in three places. She was hospitalized and had surgery.",1
"An employee was helping to install the top of a fiberglass well when the side wall of the well cracked and allowed the lifting strap to come loose. The tank then dropped, striking the employee and injuring his hip.",1
An employee fell approximately 3.5 to 4 feet from the bed of a shingle delivery truck to the ground and was hospitalized overnight.,1
An employee Injured her back while lifting a case of soda and was hospitalized overnight.,1
An employee was injured when he fell from a ladder. He was hospitalized with a ruptured spleen.,1
"On March 12, 2015, an employee slipped on ice and fractured his arm while getting back into his truck at the company's distribution/storage facility.",1
"When an employee disconnected a rinse hose connection from his truck, residual ammonium hydroxide (liquid ammonia) sprayed him in the face and got in his mouth. He was wearing chemical resistant gloves, goggles, and coveralls. His injuries include a minor burn to his lower lip and a 1/2-inch white patch on the tip of his tongue.",1
An employee fell approximately 15 feet from a deck being constructed and broke multiple bones.,1
"An employee stood up from a chair, lost balance and/or stumbled on the carpet, and then fell.",1
Employee slipped on a patch of ice on the sidewalk while walking from his car to the building after arriving in the morning.,1
"An employee was inspecting a C-130 aircraft using a 6-foot ladder. While descending the ladder, the employee missed the bottom rung and fell to the floor. The employee sustained a fracture to the right hip and received surgery later that evening.",1
"An employee was setting a structure and was directing an excavator operator on where to dig a hole. He was standing between the bucket and a PCP (concrete) pipe. The operator could not see him behind the bucket. When the operator moved the bucket, the employee was pinned between the bucket and the pipe.",1
"An employee was removing a washer/dryer combo from an apartment and bringing it down the stairs. The unit slipped and landed on the employee's right ankle, requiring surgery.",1
An employee suffered a broken pelvis when he fell from a machine.,1
An employee's finger was amputated while operating a service rig.,0
An employee carrying a ladder slipped and fell. The employee sustained injuries to his head.,1
"An employee was spotting a tractor that was picking up equipment. The employee slipped, and the employee's hand was caught between the tractor and equipment. The hand was crushed and required surgery.",1
An employee was working in the tire shop when other employees heard an explosion. The employee was burned from the waist down and hospitalized.,1
"An employee was operating a forklift to move materials on a 16-foot high storage rack system. The materials, which weighed approximately 300 pounds, fell on the employee.",1
"An employee was struck in the back by a wall panel, resulting in fractures to the lower vertebrae.",1
An employee was shocked while working on the roof.,1
"An employee fell while climbing onto a piece of equipment, fracturing his left elbow.",1
"An employee was troubleshooting the preheat oven when his finger got caught between a cylinder and machine frame, amputating his left index fingertip.",0
"An employee was pressure-testing a sand separator in a test booth. The employee entered the test booth to remove a plug on the sand separator. Before entering, he turned off the water hose and turned on the high-pressure pump. As he removed the plug, a failure occurred. The employee sustained a broken arm, and the plug was embedded in his arm.",1
An employee suffered an amputation of his right hand (to mid-forearm area) when he crawled under the soil sort conveyor to retrieve a cell phone.,1
An employee fell and injured the right hip after being cut off by another skier while skiing with a patient.,1
"An employee was throwing a garbage bag into the dumpster. She slipped and fell, hitting her left hip. She was admitted into the hospital and had surgery.",1
"An employee was piling lumber on a cart when it dropped on his finger, resulting in a partial amputation of the left middle finger.",0
"A employee was adding water to a forklift. When he stepped down, he missed the last step, fell, and broke his left femur, resulting in surgery.",1
An employee's hand got pinched between a cylinder and an air cylinder casing; the right index finger and middle finger were amputated.,1
An employee was stepping down from a box-truck lift gate to the ground and rolled an ankle. The employee dislocated his ankle and broke his lower leg bone.,1
An employee was hospitalized after receiving burns from falling into a tank containing a 130-degree Fahrenheit chemical solution.,1
"While cleaning a food slicer, an employee amputated the ring finger on her right hand.",0
"While manually moving a cabinet, an employee sustained a hernia.",1
"An employee was cleaning a toilet in the women's bathroom in the NFS Building. He blacked out, hit his head on the floor, and received a laceration. He was admitted to the hospital.",1
A heavy piece of equipment tipped over onto an employee's leg while the employee was trying to unjam a strap that got caught between the equipment and the pallet it was on.,1
An employee fell while delivering product to a retail store and hit her head.  She was hospitalized with a brain injury.,1
An employee was connecting steel trusses when the chain that was holding one of the trusses slipped. The employee's right index finger was smashed between the trusses.,0
An employee on an oil rig had his left hand amputated by a rock crusher while dislodging rocks from the machine. Lockout procedures were not followed at the time.,1
An employee experienced a testicular torsion while climbing onto a forklift.,1
An employee was admitted to the hospital after striking her face on the steering wheel of her tractor while trying to free it from under a tub chassis.,1
"An employee slipped on ice on the main walkway while walking into work, resulting in a fractured left leg.",1
"An employee slipped on black ice, fell, and struck head when walking into the clinic on 3/10/2015.",1
An employee was injured in the left leg (thigh area) while driving a man lift from the east hangar to the north hangar. The employee hit a bump and drove into another vehicle.,1
An employee working from an 8-foot ladder received an electrical shock from an electrical pull box. He fell and broke his pelvis.,1
An employee at the facility was hospitalized after being found unresponsive in the subfloor area.,1
An employee was skiing out of bounds and hit a tree. The employee fractured the C1/C2 vertebrae and collarbone and injured the spleen.,1
"An employee working on the cheesecake slicer was performing disassembly and cleaning when the unit activated, resulting in the amputation of the right ring fingertip.",0
An employee carrying a pan of hot water in the kitchen spilled hot water on her right foot; she suffered first and second degree burns.,1
"On March 14, 2015, a meat clerk's right index fingertip was amputated while reaching into a patty-maker to clear meat.",1
An employee was pinned by a forklift and transferred to a local hospital.,1
An employee was hospitalized after being shocked while servicing electrical equipment.,1
An employee was struck by a car while crossing the street. The employee suffered head and upper extremity injuries and was hospitalized.,1
An employee suffered a fracture on his left leg when he was trapped between two vehicles on a shipping line.,1
An employee collecting trash containers at the facility suffered a finger amputation when his hand got caught between a hitch and a toe bar behind a tractor. The tractor moved forward and amputated a finger. The tractor was parked in neutral gear at the time of the incident.,0
"An employee operating a standup PIT was coming around a corner when he realized he was going to hit a guardrail. About 1 to 3 feet from the rail, the employee jumped clear of the machine, crushing his lower leg between the PIT and the rail.",1
An employee was conducting maintenance repair on a conveyor system that transports product throughout the distribution facility. The employee's right ring fingertip was amputated when he attempted to remove a chain from a motor sprocket that drove the conveyor system.,0
"An employee was attempting to place the pipe spinner leaver in neutral position when he tripped. His right hand engaged the spinner, and his left hand got caught in the spinner chain, cutting his left pinky and ring fingers.",1
An employee was injured when he fell from a fence and broke his heels.,1
An employee was hospitalized after falling at her register.,1
An employee tripped over wiring while assisting a patient and suffered a hip injury.,1
An employee was descending a fixed ladder after he sanitized the second level. He fell off of the ladder and hurt his left pelvic area.,1
An employee sustained a broken-bone injury while providing assistance to another person at a group home.,1
An employee suffered a broken arm while removing a stack from a combustor. The crew was loosening bolts from the ground level to remove a stack when it pivoted and struck the employee's arm. ,1
An employee fell from a second-floor platform.,1
"An employee was ascending a ladder to go onto a roof for a roof estimate when the ladder shifted.  The employee fell from the ladder to the ground, resulting in multiple rib fractures.",1
An employee was injured by a nail gun while installing a side light to a trim.,1
"An employee attempted to remove dunnage from under a beam by kicking it. The beam was not steady, causing it to fall and hit the employee on the ankle, which resulted in a fracture.",1
An employee was transferring product from a tote to a truck when static caused vapors to ignite. The employee was burned on the abdomen and face and has a possible broken ankle.,1
"An employee was retrieving mud flaps to reinstall on a truck. A cotter pin on the winch line, which was secured to the rear of the truck, came loose. The wire on the driver's side became unsecure and struck the employee on the left side, below the shoulder and back.",1
"During the pre-operational PIT inspection process, one of the employees who was moving a stand-up fork truck pinned another employee's foot between his moving truck and a nearby stationary truck, resulting in a foot injury and the employee's hospitalization.",1
"On March 16, 2015, at 4:15 P.M., an employee was working at the charge chute for polyester reactors. The employee had used a hoist to lift and dump an approximately 2,000-pound bag of PET pellets into a hopper that was connected to the reactor. He started to walk over the pallet on the floor toward the empty bag. When he stepped off of the pallet, he lost his balance and landed awkwardly on his left foot.",1
"An employee reached into a recycling shredder conveyor to clear tire shred when his arm was pulled into the machine, which was running at the time.",1
A driver from a different business was loading a car hauler. The injured employee approached the hauler and got crushed between the vehicle and the hauler when the driver moved. The employee sustained arm and head injuries.,1
An employee was pulling a hose to pour concrete on the third floor of an apartment building. The employee leaned against a temporary railing that was not secure and fell three stories to the ground.,1
An employee was relocating a pallet using a pallet jack. She stuck her foot out and pinned it between the palette jack and a yellow post resulting in a broken bone in her left foot.,1
"An employee amputated his left pinky (small) finger while moving a drill pipe and putting it on a rack. As he lowered the drill pipe, he slipped and his pinky got caught beneath the pipe.",0
An employee was driving and lost control of the company truck. The truck flipped and the employee fractured his neck.,1
"On March 16, 2015, an employee, reached into the discharge while inspecting the line to verify that it was running. This resulted in the amputation of two right-hand fingertips.",1
An employee walking in the south parking lot tripped on a concrete parking block and sustained a right shoulder injury.,1
An employee's left middle finger was amputated while repairing a wing machine with two other employees.,0
"An employee fell into an active excavation. The crew was setting trench boxes while the employee stood beside one of them.  As the operator attempted to position the box, it dropped approximately 3 feet, causing the employee to lose his balance and fall into the excavation. The employee sustained serious injuries: a dislocated shoulder, a small chip in a bone, and a slight crack in his pelvis.",1
An employee fell from a step ladder while drilling holes to blow insulation into a house. He hit an air conditioning unit on the way down and ended by hitting his head on a stone retaining wall. He was hospitalized on 3/16/15.,1
An employee's right index finger was amputated while greasing the conveyor that feeds the boiler. He had bent down to pick up his radio when his right hand got caught in the chain.,1
An employee had three fingers crushed and one amputated on a stamping machine. The machine's point of operation was not safeguarded at the time.,0
An employee was injured by a gasoline-powered concrete saw with a diamond blade.  The employee was cutting a core floor when the saw kicked back and cut his thigh.,1
An employee was opening a gate when the last finger of the employee's left hand was pinched in a roller; the fingertip was amputated.,0
An employee was preparing to clean a machine and was installing a plastic cover over a motor when the employee's finger got caught by a chain. The motor was not powered down at the time.,0
An employee was hospitalized after being injured by a powered industrial truck that was operated by another employee.,1
An employee was mounting a bracket in an attic area when the employee fell approximately 32 feet to the ground below.,1
"Four employees were moving a large galvanized steel gate from inside the shop to the outside. One employee went and moved a cart with an auger out of the way.  The cart had been sitting on a 1-foot-wide by 6-feet-long piece of chain link mesh, which became elevated off the ground after the cart was moved. The employee tripped over the piece of chain link mesh, falling and breaking the fibula and tibia bones in his leg.",1
Employee injured his leg while operating an electric pallet.,1
"An employee's left index finger became caught between the shoe and index on a punch press, crushing his finger. The finger was amputated to close the wound.",0
"An employee was injured by the blender lid-locking mechanism located in the bonding area. The employee fractured three right-hand fingers, requiring overnight hospitalization.",1
An employee suffered a skin burn when hydraulic fluid caught on fire and landed on his forearm during a welding process.,1
An employee was struck in the head by a metal frame when a crane hook failed.,1
An employee was water-blasting a railcar and later complained of cramping. He was taken to the hospital for dehydration.,1
An employee got the right middle finger crushed in the gears of a manually operated training aid (model of a turbo charger/blower). The employee's fingertip was later amputated.,0
"The employee was stocking boxes of meat into the cooler. He lifted a box and felt a pop in his back, as well as intense pain.",1
An employee was folding up the troughs at the back of his truck when a front-end loader that was moving material pinned him between the truck and the loader.,1
"An employee was removing a 16""-pipe from a pipe rack by cold cutting. The employee was removed from the pipe rack because he was not feeling well. He was transported to the hospital.",1
An employee carrying a steel plate lost his grip; the plate fell onto his toes.,1
"An employee was installing a sign while working from an extension ladder. He reached behind the ladder to stick vinyl onto the wall. He slipped and fell approximately 8 feet from the ladder onto the ground, sustaining a concussion, fractured left leg, and cut on his right knee.",1
"An employee reached between the motor driving bar and the frame of a poly tray machine to remove a jam. The bar closed and trapped the employee's arm, resulting in a double fracture to the forearm. The machine was not stopped at the time.",1
"On March 17, 2015, an employee fell off of the fixed ladder on the back of a truck while trying to pull up a 5-gallon bucket of concrete additive. The employee fell backwards, struck another employee standing at the bottom of the ladder, and landed on his right shoulder. He suffered a dislocated shoulder and was admitted to the hospital for a possible broken rib and lung perforation.",1
"An employee exiting a scissor lift missed the last step and fell approximately 4 feet, fracturing the hip.",1
"Employee's right pinky finger was amputated while working in Stratton, OH.",1
"After detaching a portable ladder from a rooftop, an employee fell from a ladder approximately 12 to 18 feet to the ground below. The employee suffered a broken right leg and fractured right elbow.",1
"An employee was placing wire on a sheave with his gloved left hand. His glove was pulled between the tension belt and the sheave, causing his left thumb to be cut to the bone. The employee was hospitalized.",1
"An employee had just changed the upper inner tool on a powdered metal press. The upper inner tool was not properly aligned with the lower die. When the employee cycled the press, the upper outer tool shattered and created shrapnel, which struck the employee in the neck. The employee was hospitalized for surgery to remove the shrapnel from his neck.",1
An employee was setting up dies in a press and was installing the top die. The bottom die fell out and struck the employee's left foot.,1
An employee slipped on ice in the parking lot and broke her wrist.,1
"An employee was hooking a crane hook onto bundles of rebar in a ship's cargo hold. Two bundles of rebar got stuck together, so the employee lowered the bundles and cut them from each other using bolt cutters. There was still some tension on one of the pieces of rebar; when the employee cut the bundle strap it swung, hitting and breaking his lower leg.",1
"An employee was stepping across a pile of dirt in the way of his work when he misstepped and fell, shattering his left ankle.",1
Am employee operating the bead seater tool had his finger impacted by a heavy retaining ring while adjusting the tool for a tire in another size.,1
An employee sustained a fingertip amputation while cutting beef chuck roast into steaks with a band saw using a boneless blade (no teeth).,0
"A maintenance employee working from a 10-foot extension ladder was putting clips on the shade cloth. The ladder shifted, and the employee and ladder fell. The employee hit the transport rail (rollers), broke five ribs, and lacerated his lung.",1
"An employee was straightening ""subs"" (pipe-shaped oilfield tools) on a pallet when he caught his finger between two subs. He pulled his hand away, tearing the skin and nail from his fingertip.",0
An employee was slicing a bone-in NY strip steak when the bone caught his thumb and pulled it into the saw blade.,0
An employee operating a Microtome machine sustained an amputation injury to her left index finger.,0
An employee sustained a broken arm after reaching into a conveyor.,1
An employee fell while descending a ladder after making a splice on a telephone pole.,1
"An employee was carrying a 1-gallon bucket of hot liquid grease when he slipped. The liquid splattered on his right arm, causing third-degree burns to his hand and elbow.",1
An employee using a saw amputated his index fingertip.,0
"A maintenance employee used their finger to unjam an ice cream carton filling machine. The equipment cycled and caught the employee's finger, causing a partial amputation of the left middle finger.",0
An employee was injured and hospitalized after attempting to gather stored racking that was to be installed in the store.,1
"An employee entered a restricted area to check on a press hopper. He suffered a broken rib after being struck by a tram car bucket, which pinned him between the bucket and a hopper. The tram car operator was unaware of his presence at the time of the incident.",1
An employee was cutting lumber stakes on a sawhorse. He was using a handheld circular saw when the stock kicked back and amputated half of his thumb.,0
"An employee was injured on March 18, 2015, at 0730.  The employee was attempting to load and tie down a forklift with a tie down chain when he fell approximately 2 feet off of a trailer ramp area and hit his head. He lost consciousness and suffered swelling to the head.",1
The last digit on an employee's pinky finger was amputated when caught between a metal plate attached to a pump and a trailer bed while unloading scrap metal into the Peddlers Yard. Suitable safeguarding was not in place at the time of the incident.,0
"An employee was injured when a hoist that he was using malfunctioned, causing the basket on the hoist to fall into a tank of hot water caustic solution. This caused waves of the solution to develop and spill over onto the employee, resulting in severe burns to the employee's legs and feet.",1
An employee suffered an ankle injury and required hospitalization.,1
"On 3/18/15, a maintenance employee was repairing a web press when he bumped his right-hand index finger knuckle on a part, sustaining a scratch.",1
"An employee was installing anchors when the installer misfired, broke the employee's leg, and caused a severe laceration.",1
An employee sustained burns to his legs after stepping into an unprotected floor opening with water at about 140 degrees in the production area. The employee was hospitalized.,1
"An employee attempted to straighten logs that were out in the yard when a log fell and hit his left foot, resulting in an open fracture to the foot and hospitalization.",1
An employee was working in a scissor lift when an overhead gantry crane knocked the lift over. The employee fell and sustained life-threatening injuries.,1
"An employee providing play therapy at the park tripped over a playground-equipment post and broke a tibia and fibula, approximately 4"" above the ankle.",1
"An employee sustained a partial amputation to the left thumb while offloading steel from a truck. The hoisted material shifted, pinching the thumb between the load and the hook.",0
"A maintenance employee was inspecting an oil leak on a yard truck used to pull trailers. The employee placed their body under the truck by lying on the ground. The employee asked another employee to start the truck; when the truck started, it rolled and pinned the employee between the ground and one of the truck tires. The employee was hospitalized.",1
"An employee was working near the loading dock area. As a forklift passed the employee, some material fell from the forks of the lift and struck the employee in the leg. He fractured his right leg and was admitted to the hospital.",1
"An employee was about to transfer from the scaffold ladder to the deck when his left foot slipped off. He fell 13 feet and sustained fractures in his left shoulder, fourth rib, and cervical vertebra (C4).",1
"An employee cutting cow tongue attempted to hang the tongue on a hook. The tongue started to fall from the employee's left hand. The employee attempted to grab it with the right hand, which held a knife, causing a left-arm laceration.",1
"An employee was putting a hitch on a trailer. As she moved the hitch forward, she lost control of it and it fell on her leg. She broke her leg and was hospitalized.",1
"On March 18, 2015, at approximately 12:05 p.m., an employee fell from the tracks of the track truck while unloading straw bales from the truck bed. He fell 2 to 3 feet and struck his head on the ground, resulting in hospitalization for chest-wall bruising and head injury.",1
An employee was closing a semi-truck trailer door when the cable to the door broke; the trailer door slammed onto his foot.,1
"An employee fell on the ground outside of a patient's house, fracturing both lower bones in his right leg.",1
An employee was leaning on an engine to reinstall a radiator when the employee sustained a hernia.,1
An employee fell on snow in the parking lot and sustained a right hip fracture.,1
"An employee using a pallet jack, which was trailing behind him, attempted to walk through flap doors while a forklift operator was driving through the doors from the opposite direction.  The forklift had a pallet on the forks. The operator drove forward, blew the horn, and continued to drive through the doors, hitting the employee on the left leg with the pallet.",1
An employee was cleaning moving rollers when her left hand got caught between them.,1
"An employee was descending a 28-foot ladder when a gust of wind knocked the ladder off of the cable. The ladder has a hook at the end, and the employee had the ladder hook on the cable. The hook knocked his ladder off of the cable strand. He broke his leg.",1
An employee was delivering freight to a company when he fell down on the dock. The employee was found unconscious and transported to the hospital.,1
An employee amputated the second digit on the right hand while using handheld power tools.,0
"An employee was stepping down from the bus when she slipped and landed on her bottom backside. The employee attempted to get up and slipped again, hitting her left side. She was hospitalized with a fractured rib that punctured her lung.",1
"An employee was leaning from a boat to remove a log from Lake Desoto when a wave swell caused an unexpected shift. The shift caused her finger to get caught between the boat and the log, amputating the first segment of her right index finger.",0
"On March 19, 2015, an employee's right thumb was caught in a chain and sprocket on a sealer conveyor, resulting in an amputated fingertip.",0
"An employee was installing two cast iron pipes when the pipes slipped through the bracing and fell onto his right hand, cutting the pinky fingertip.",0
An employee was burned on the face and hands while refueling a gas-powered air compressor used to spray insulation foam.,1
"On March 19, 2015, at approximately 7:00 a.m., an employee was hospitalized overnight with a fractured bone after being struck by a falling cart on his left ankle.",1
An employee sustained burns to his left leg after slipping into a hot rinse bath.,1
A piece of metal was stuck on the conveyor near the shear. An employee climbed onto the moving conveyor to remove the metal and got his leg caught in the conveyor crushing it.,1
"An employee was working on a mechanical arm that accepts or rejects product. He was changing the hose when he lost his balance and fell onto a jagged piece of metal welded to the mechanical equipment. His forearm was cut, causing deep lacerations and severing a tendon.",1
An employee's arm got caught in the rotating parts of a machine during machine operations.,1
An employee slipped and fell on wet pavement in the parking lot. The employee had surgery to treat a right hip fracture.,1
"While working on the rotary valve of the tumbler machine, an employee attempted to clear out a clog with his hand; his first four fingers were amputated. The machine was still running at the time of the incident.",1
An employee was removing a die from a machine when it fell and fractured his right thumb.,1
"While returning to work from a break, an employee (welder) experienced shortness of breath, subsequently requiring medical transport and inpatient hospitalization.",1
"On or about 3/19/15, at about 9:40 PM, an employee was preparing to go to the range and shoot firearms for inspection. The employee loaded the gun outside the range and was disassembling the loaded gun when it fired. The employee was injured with a shot wound to the left hand. The employee was hospitalized, and reconstructive surgery was performed on his hand.",1
An employee was hospitalized overnight after slipping and hurting their back.,1
An employee got his foot caught on the hose of a drill that was on a ladder. The drill fell on and lacerated the injured employee's foot.,1
An employee was moving racking material with a crane when he pinched his left third fingertip pad between the hook and rack. He sustained a fingertip amputation.,0
An employee fell from a 2-foot ladder and sustained serious injuries.,1
An employee missed the last rung on a fixed ladder on a delivery truck; he fell and injured his leg.,1
"An employee was operating the fiberglass pipe end abrasive wheel grinder. The grinder has a copper pipe that sprays water onto the abrasive wheel when it sands the fiberglass pipe. The employee struck the pipe with a piece of wood to remove a clog. His hand slipped, and his right index finger was grinded on the face of the abrasive wheel.",1
An employee was hospitalized after his leg was caught in an unprotected rotated auger.,1
An employee was injured when his arm was caught in a roll packing machine while oiling it. He sustained severe lacerations and was hospitalized.,1
"An employee was moving the head of a welding machine from one stiffener fitter machine to another. He put his right hand on top of the head to slide it down to the next stiffener. His hand slipped off and landed on the plate that the head rolls on. His right middle finger landed above the hole that is inside the plate, and the head rolled over his fingertip.",0
An employee sustained fractures in the right foot when a rack fell on it.,1
An employee fell off of a 10-foot wall ladder while closing a vent. He broke his arm and cut his face.,1
"An employee was smoothing burs off of a piece of metal using a disc sander. The metal got caught and pulled the employee's right thumb into the sander, peeling the skin back. The tip of the bone was removed during subsequent surgery.",0
"On or about March 5, 2015, an employee was hospitalized after incurring a burn to the leg/ankle.",1
An employee suffered a fractured wrist injury and was admitted to the hospital.,1
An employee was admitted to the hospital after straining his groin area while lifting heavy boards.,1
An employee fell from a one-level scaffold and received a head injury.,1
An employee was installing an electrical panel for the new car wash when he was shocked.,1
Employee fell off of a stepladder.,1
"At approximately 1:00 p.m. on 3/19/15, an employee was unsteady and fell while approaching the water cooler. The employee did not have any serious complaints that afternoon and left at her usual time. She was hospitalized for a broken hip.",1
An employee lacerated the left-hand middle fingertip while cleaning a meat slicer.,0
An employee tripped on an uneven floor surface and suffered a broken hip.,1
An employee was cleaning an old fixture room. One of the fixtures was on the ground. The employee tripped over the fixture and sustained a fracture.,1
"An employee fractured his right femur when a stack of steel roofing sheets slid off of the staging area and struck him on his right thigh. The stack of sheets was hit by a tractor with steel forks, which caused the stack to slide off and strike the employee.",1
"An employee was operating a pneumatic seal press with a two-hand control. After activation, the employee reached in, and the ram came back down and caught one finger underneath the ram. The employee's right-hand middle finger was amputated.",0
"An employee was walking by a log pile when one of the logs slipped and rolled down the pile, hitting the employee in the back of the leg and breaking it.",1
A forklift battery fell on and broke an employee's left foot as he was changing the battery.,1
An employee was climbing down an extension ladder and fell after taking approximately three to four steps. Another employee was holding the ladder; he was unable to control the ladder when it shifted.,1
An employee was unloading his truck when he was struck by an out-of-control car. He was hospitalized for surgery on a broken ankle.,1
"An employee fell while descending a ladder. The ladder slipped, causing the employee to fall to the hard ground surface below. The ladder also landed on top of the employee after the initial fall. The employee sustained fractures to the femur, as well as a knee injury, and required surgery.",1
A maintenance employee was troubleshooting the Osgood Equipment when he had his right middle and index fingertips amputated while checking the tension on a chain and sprocket.,0
An employee was hospitalized and sustained an amputation after having his left index finger pinched between a pallet jack and load.,0
An employee was struck from behind by a guest skier and sustained broken ribs.,1
"An employee was performing water lancing operations on the U.S.S. Baton at BAE Shipyard in Norfolk, Virginia. The employee was struck by water pressure at the discharge end of the water lancing equipment, resulting in injuries to the right middle finger. The employee was hospitalized.",1
An employee was burned by steam as the employee opened the housing of a condensate steam sump.,1
"A king pin press malfunctioned, snapped back, and caught an employee's finger. He was hospitalized, and his left ring finger was amputated.",0
"An employee was instructing another employee on how to conduct a moisture test by placing baked cookies coming out of the oven (on a conveyor belt) on top of the fan's guard enclosure. A series of three to four fans are attached to the belt to blow down on the cookies (cooling) as they come out of the oven. These fans could be located 6 to 12 inches above the conveyor belt. The oven operators can't see the fans but are able to reach and make physical contact with them. The injured employee took a moisture reading by removing the cookie from the conveyor belt and placing it on top of the fan's guard for cooling. The employee's right-hand middle finger came in contact with rotating fan blades, amputating her fingertip to the knuckle. A spatula that was available for removing cookies from the pan was not used, and the fan guard was broken at the time of the incident.",0
An employee was positioning an ingredient barrel on a pallet when he lost hold of the drum. His finger was pinched between the drum and a diagonal I-beam. His index fingertip was amputated.,0
An employee injured a back muscle while pulling a cart of money.,1
An employee in the receiving area was moving a ladder when it struck a fixture that was stored on top of a metal case. The fixture fell approximately 15 feet and struck the employee's face.,1
"An employee was opening an electric gate. He rested his hand on the top of the gate while taking the slack out of a chain on the gate with his foot. His hand was on a roller on the gate, and his finger got caught between the roller and the top rail on the gate. His left pinky finger was partially amputated.",0
An employee stepped off of the boat in mud and water up to his knees. He was hospitalized with cellulitis.,1
An employee was spotting a car (placing the car where he needed it) and was caught between the car and the dock.,1
An employee reported difficulty breathing due to dust inhalation. He went to the hospital.,1
An employee was walking on top of a 9-inch-high berm when he lost his balance and landed on the left side of his body. He broke his right leg.,1
An employee was hospitalized overnight due to a spider bite she sustained while putting trash in the dumpster.,1
"An employee was struck by a 2,000-pound pipe while working on a service rig. He sustained damage to his left ankle.",1
"An employee was descending a ladder after installing communication cables at a communication pole when the ladder moved. He dismounted the ladder approximately 10 feet from the ground and landed on his feet, shattering his right heel and breaking his left ankle.",1
Employees were dismantling/removing heavy equipment at the Amazon facility. One of the employees got on a stand-up forklift to move some things while cleaning the area and got his leg caught between a concrete wall and the forklift. The employee was not trained to operate the forklift.,1
"On or about March 20, 2015, at 3:30 p.m., an employee was placing/helping to place a structural tube on a concrete pier foundation at the jobsite. While the tube was being set, the bottom of the column slipped off of the pier and hit the employee on the ankle.  The structural tube pier weighed approximately 250 pounds and was approximately 14 to 16 feet long. This structural tube would be used as a vertical support tube.",1
"On March 20, 2015, at approximately 11:00 p.m., an employee was using a core drill to remove anchors from the face of the Bluestone Dam in Hinton, West Virginia. A 1/4"" to 3/8"" rope became entangled in the 3"" core bit. The employee's left arm was pulled into the rotating bit, which resulted in fractures of the radius and ulna.",1
An employee lost his balance and fell from a ladder.,1
"On March 21, 2015, an employee was struck by a forklift and was pinned between the forklift and racking.",1
"An employee was painting a building exterior on the job site. He was working around a granite panel when a safety pin came loose, causing the panel to fall on him.",1
An employee's hand got caught between the fixed guard and a pallet while trying to clear a jam. She broke part of her right thumb and the crushed thumb tip was amputated.,1
"An employee was struck by a form panel at 252 East 57 Street, New York, NY, 10022.",1
"On March 21, 2015, an employee suffered an amputation from a milling machine.",0
"While removing scrap metal from a lathe, an employee's right thumb was crushed between the lathe and saddle.",1
An employee was fixing a sin fin motor when his arm got pulled by a belt. He lost his ring fingertip on the right hand.,0
An employee operating a forklift backed off of a loading dock and fell. The employee was hospitalized with a concussion.,1
"An employee was cutting meat, felt light-headed/dizzy, and passed out on the floor. Another employee found him unconscious and reported it to management. The employee was hospitalized.",1
An employee tripped and was admitted to the hospital.,1
An employee was injured when her hand got caught in the cardboard recycle machine.,1
An employee injured her left middle finger after tripping over temporary water removal equipment in the parking lot.,1
"An employee slipped and fell, breaking his left leg and bruising his hip.",1
"An employee's right ankle and foot were crushed when the ""mule"" (4 wheeled vehicle with a small bed in the back) he was operating rolled after striking a log. The employee was hospitalized.",1
"An employee fractured his right middle finger while loading a 250-pound test plug onto the back of his truck. The forklift used to raise the load released it, and the employee's finger got caught between the test plug and a supporting bracket. The employee was hospitalized overnight.",1
An employee was struck on the top of the head by a piece of debris.,1
An employee fell backwards and hit his/her head on the ground while approaching a semi-truck to open the door. The employee was hospitalized.,1
"An employee working in the mixing department sustained a serious injury to his left arm/shoulder. The employee noticed rubber between the takeaway belt and the end roll, which made the belt pull to one side. The employee began jogging the belt to remove the rubber. His hand got caught between the roll and belt, which pulled him in up to his shoulder.",1
"An employee slipped and fell while a dump box was simultaneously being lowered. The employee's right thumb was caught between a pinch point, which resulted in an amputation of the right thumb at the first knuckle.",1
An employee working onboard the U.S.S. Eisenhower at Portsmouth Naval Shipyard contacted a piece of energized wire that was encased in a steel pipe conduit.,1
"An employee was washing a 1000-gallon tank on a catwalk. The water in an adjacent tank boiled over, splashing the employee's back with boiling water. The employee sustained first and second degree burns (blistering).",1
An employee's left index finger was crushed/amputated by a grinder piston while working on the finish grinder. There was no guarding on the piston at the time of the incident.,0
An employee's finger was injured while using a cloth rag to clean up excess oil near an exposed chain. The employee's finger was caught in the chain.,1
"An employee fell from a platform that was 2 to 2.5 feet high, sustaining a punctured lung, fractured ribs, and fractured vertebrae. The employee was hospitalized.",1
Employee's hand was caught in a noodle compressor machine.,0
"A machine operator asked the injured employee to change out an air tester. The employee asked another coworker to retrieve airlock seals to change the air tester. The coworker and machine operator went to the tool crib to retrieve seals. During this time, the injured employee reached into the area of operation. A sensor sent the jaw block (hydraulic-operated) down and amputated the employee's left-hand ring finger (half of finger) and pinky (1st joint of finger).",0
Injured employee was pinned between a concrete wall and the bucket of the backhoe. Another employee was driving the backhoe that struck the injured employee. ,1
"Employee broke leg while installing a cap on an irrigation line in a 4-foot trench. The sides of the trench caved in on the employee, fracturing his right leg between the knee and ankle.",1
An employee was helping to move two carts that contained parts and got a finger caught between the carts. The carts crushed the employee's fingertip.,0
"An employee was placing abrasive material in an injection molding machine to purge the machine.  The employee lost his balance and fell off of the machine, injuring his shoulder and forearm.",1
"On March 23, 2015, an employee pinched their finger between a side section and a support, suffering an avulsion. The employee went to the hospital and received stitches to their left ring finger.",1
An employee slipped and fell in the parking lot.,1
The injured employee was removing a section of a protective walkway. He was using a stepladder to climb beside the walkway to remove a sheet of plywood. He stepped from the stepladder to the top of the protective walkway. The walkway collapsed to the ground with the employee on top. He broke his left femur and dislocated his knee.,1
"An employee turned on a chop saw, but it did not start running. The injured employee came over to inspect the saw. He opened the panel and reached in to grab the belt when the belt moved, pulling his right thumb into the flywheel. Approximately a half inch of the right thumb tip was amputated.",0
An employee was removing boxes from a conveyor belt when the belt grabbed his gloved hand. The employee pulled his hand back and amputated his fingertip.,0
Employees were relieving pressure from a pressure relief valve assembly. The valve bar or assembly struck the injured employee in the neck and chest.,1
An employee was placing packs of tortillas into a machine that cuts the tortillas into triangles. The employee's fingers came in contact with the machine where it lowers to cut the strips.,1
"Employees were lifting a BOP using a forklift to work on the bottom of the BOP. While the BOP was suspended by the forklift, the injured employee placed his hand on the forks. The BOP rolled backwards, catching and amputating his left pinky fingertip between the heavy equipment and the fork.",0
"A driver was reversing a truck near a bridge. The injured employee signaled the driver to stop, but the driver accidently stepped on the gas and struck the employee. The employee sustained a fractured pelvis and spine.",1
"An employee was removing a tarp on top of a rice pod when he slid down the pod and landed in a ditch filled with mud, fracturing his tailbone.",1
"On or about March 23, 2015, an employee received a thumb tip amputation while trying to remove a chain and sprocket from a calcium silo system. The system was not locked out at the time of the incident.",0
An employee suffered possible broken bones and a partial amputation of the left long finger while attempting to move a steel grate.,0
"An employee was repairing and dismantling a forklift. The forklift mast came loose and hit the employee, injuring his left leg. He was hospitalized.",1
"Two employees working from separate stepladders were replacing a leaky pressure-reducing valve in an overhead low pressure (12 psi upstream from the pressure-reducing valve), 2-inch diameter, steel steam line. There was a shutoff ball valve approximately 8 inches upstream from the pressure-reducing valve. In the process of replacing the pressure-reducing valve that was threaded into the line, the nearby shutoff ball valve (which was also threaded into the line) became disassembled, releasing steam that caused burns to one of the employees. The shutoff valve was closed before beginning the replacement, but it was not locked/tagged out. The main steam valve for the line, which was approximately 15 feet away, was also not closed or locked/tagged out at the time.",1
"An employee fell while greasing an idler wheel, injuring his lower back.",1
An employee was working at a filler station. A bottle jammed in the machine. The employee reached into the machine to remove the jam and suffered a partial amputation of the right index finger.,0
"An employee who was hitting the side of a feed bin in order to loosen feed fell approximately 15 feet from a catwalk.  The employee was hospitalized with broken ribs, a pelvic injury, and a broken arm.",1
An employee tried to climb down adjacent shelving after his warehouse picker locked up. The employee fell approximately 14 feet to the concrete floor.,1
"An employee was running the turn table and used a chipper to remove flash from a mold. A flash dropped down into the core pool area; the employee put the table in manual mode so he could manually remove it. The other employee at the table misunderstood what the employee was doing and actuated the part of the turn table, which caused the core to move and amputate the injured employee's right middle finger at the first knuckle.",0
An employee was herding cattle from a pre-stall barn to the milk barn when one of the cows slipped and fell on the employee's leg. The employee sustained a broken leg.,1
An employee was involved in a three-car auto accident while transporting a car for Enterprise to a body shop. The employee was hospitalized.,1
"An employee suffered an amputated right pinky fingertip when a 30-inch diameter metal cut-out section struck it. The employee had cut the section from a 13-foot diameter heat exchanger being fabricated and started to grind the cut-out area inside the cylinder. The vibrations from the grinder caused the metal cut-out section to slide approximately 12 inches, striking his finger. The employee was hospitalized.",1
"An employee sustained a broken arm while cleaning a food production roller, which was energized and pulled him into the machine. The rollers were unguarded and not locked out at the time of the incident.",1
An employee sustained an amputation to the right index finger after pushing a rod through a roll of plastic sheeting.,0
An employee was hand delivering the mail when the dog of the house jumped the fence and attacked her. She was hospitalized.,1
An employee amputated part of his finger while operating an envelope-printing machine.,1
An employee was cleaning after the Blue Man Show when she slipped and fell on her wrist.  She was transported to the hospital and admitted for surgery.,1
An employee got a finger caught in the drive chain of a stretch wrap machine.,0
"An employee was observing palletized material moving down a conveyor. She noticed the sprocket and chain power transmission mechanism rubbing against the conveyor frame. While showing the maintenance lead the problem, she pointed her finger in the direction of the sprocket and chain and set off the photo eye, which activated the chain. Her right middle fingertip got caught and amputated.",0
"On 03/24/15 at 3:05 a.m., an employee was driving a yard truck with a container attached. While maneuvering, the container flipped over and disconnected from the yard truck. The truck bounced, and the employee suffered head trauma, tooth loss, and an ankle fracture.",1
An employee amputated his right ring finger while operating a molding machine.,0
"Employees were clearing mangroves along the shore on Pearl Harbor. When the cut mangroves were being pulled to shore, the rope broke, and the pulley struck an employee in the head.",1
"When an employee stepped off of a forklift to disconnect it, the unit moved, catching his foot between the forklift and the battery charging station. The employee broke bones in his toes.",1
An employee had two fingertips amputated on their left hand after reaching into the chute of the fat sucker equipment. ,0
"An employee was blowing insulation in an attic while tied off with a harness and lanyard (personal fall arrest system). He went to move to a different spot. While changing anchor points, he stepped into a scuttle hole and injured his back/neck.",1
An employee was operating the elevators and tongs to run pipe out of the hole when the drilling line broke. The block fell and struck his foot.,1
An employee's finger was pinched between a motor cover and forklift forks while trying to reposition the load on the forks.,0
An employee was working on a horizontal milling machine when the employee's finger got caught between the rotating chuck and the metal stationary platform. The machine was unguarded at the time.,0
An employee operating a sit-down forklift got his left leg pinched between the forklift and the metal racking. He sustained a fracture to the lower leg.,1
"A client pushed his chair back away from the table as an employee walked past. The employee tripped over the chair leg and fell, fracturing the right patella and requiring surgery.",1
"While walking, an employee tripped on a stump and was impaled between the bridge of his nose and eye socket.",1
An employee fractured the right wrist while operating a mixer used for mixing adhesive(s). The employee's glove got caught on the mixer blade/propeller.,1
An employee was ripping a board on a table saw when it kicked back. The saw blade amputated two fingers on his left hand.,0
"An employee was assembling piping (10 feet long, weighing approximately 100 pounds) on a pump skid. When the pipe was set down, the employee's finger was caught between the pipe and the flange, amputating the tip of the left ring finger. The employee required surgery.",0
An employee fell off of a roof and was hospitalized.,1
An employee amputated his right index finger (at the middle knuckle) when it came in contact with the band saw while cutting meat at about 8:45 a.m. on 03-24-2015. The guards were in place at the time of the incident.,1
An employee was burned on his lower back and posterior by a heater used to warm equipment and the general environment. He was wearing personal protective equipment.,1
An employee's fingers got caught between a bladder bag and a tire mold. The employee was hospitalized and received an amputation of the third digit to the second knuckle and the fourth digit to the first knuckle.,0
An employee was walking into work and slipped on ice. She broke a bone in her leg and required surgery.,1
"An employee was turning a 300- to 400-pound flange to clean it when the chains holding the flange came loose/unhooked. The flange fell on the employee's right foot, breaking five bones.",1
An employee sustained injuries to his left index finger while rigging down.,0
"An employee working on a 480V electrical panel dropped a metal cage, which created an arc flash and burned the employee's hand.",1
"An employee attempted to clear a jam near the glue pick-up roller on a winder machine. The employee's right index finger made contact with a moving roller, amputating the fingertip.",0
An employee was admitted to the hospital after being pinned between a remote control dirt compactor and pylon.,1
An employee injured his right hand when he reached over a rotating mill to adjust the blade.  The rotating mill caught the cuff of the employee's right glove and fractured three bones.,1
An employee fell from a Segway and injured her right leg while preparing to leave the office to start her work day.,1
An employee climbing a ladder on the back of a tanker truck fell approximately 14 feet when the truck moved while the employee was climbing. The employee was wearing a full body harness and was attempting to connect to an overhead anchor point just prior to the accident.,1
The driver drove a chassis with a container up to a crane to have the crane lift the container from the chassis. The pins were not disengaged from the chassis and the crane picked up the chassis and the yard jockey (half-cab). An employee was lifted and dropped and sustained two broken vertebrae.,1
An employee was burned by a flash fire while connecting equipment to a gas line.,1
"An employee was operating a stand-up, powered pallet jack in an ice cream freezer. While turning the pallet jack, the employee's foot got pinched between the pallet jack and storage racking, amputating part of the left big toe. The employee's left foot was hanging outside of the rider platform at the time of the incident.",0
An employee entered the blower area to inspect the damper and conduct preventive maintenance.  The employee fell 5 feet off of a ledge onto duct work and sustained body injuries. There was low lighting in the area at the time of the incident.,1
"An employee was on a scissor lift cutting a metal water pipe (15-feet long) with a torch. When the pipe was completely cut, it hit the scissor lift and caused the lift to fall 15 feet to the ground. The employee broke his arm and pelvis and was hospitalized.",1
"An employee arrived in the parking lot at the work site to attend a meeting. She exited her vehicle and fell when she stepped off of the 5- to 6-inch curbing. She landed on the concrete pavement and injured her leg, breaking her tibia in two places.",1
"On March 25, 2015, an employee transporting a racking system contacted a 480-volt busbar. The employee received burns to the torso, head, and shoulder and was hospitalized.",1
Employee shot a nail from a nail gun into his left thumb. ,1
An employee was stepping from a walkway with guard rails onto the roof when he stumbled and fell off of the roof edge. The roof was approximately 32-feet high.,1
An employee placed her hand in a screw conveyor to remove a jam. The conveyor was still operational and amputated her fingertip below the fingernail. Two parts of the machine were shut off and a guard or two were removed at the time of the incident.,0
An employee fell from a ladder and was hospitalized with a broken arm.,1
Drano splashed into an employee's eye while unclogging a drain.,1
An employee suffered an amputation of their left middle finger while working on the draw bench. The employee's finger was caught between the faceplate and the knockoff ring.,0
"An employee was installing a doubler plate on a ballast tank on a boat that was in dry dock. He was stooped down with his back against pipes, welding a vertical patch on the tank about 4 to 5 inches from his right leg, when his pants caught fire. The employee was welding in very tight quarters.",1
An employee was injured when his left leg got caught between the truss press and the table.  The employee sustained a left leg amputation from the knee down.,1
"While working on his route, an employee felt intense pain in his back, going down to the back of his legs. He was hospitalized with a pinched nerve in his back.",1
"An employee was using a capstan and rope. The rope got caught, and the employee attempted to untangle it. The employee's hand was caught between the rope and the capstan spool while wearing a glove. His fingertip was degloved.",0
"The employer was conducting a crane switching operation at the intersection of track three and east track. A component part of the crane fell and released hydraulic fluids, which contacted the injured employee's left forearm. The employee was hospitalized, and the left arm below the elbow was amputated.",1
"An employee was electrically shocked when his right hand made contact with a power line that was inductively charged. There were three power lines, two outer lines with 138kv and a center line that was disconnected but not grounded. The employee grabbed the center power line when he stumbled while trying to exit the tower. He suffered exit wounds to the right shin and a right toe.",1
"An employee was guiding a forklift to set a roll of conveyor belting onto a stand on a table.  The stand collapsed when the roll was set, and the employee was catapulted up and off of the table, landing 12 feet away on a concrete floor in a sitting position. He injured his right hip and buttocks and was hospitalized, and later had surgery to correct hip fractures.",1
"An employee stepping out of the room reached out to stop the door from hitting her when her left-hand pinky finger got caught in the door. The finger was broken, cut, and bleeding, and she was hospitalized.",1
"An employee was testing a pressurized air tank with the pressure at 6 psi. During the testing procedure, he took a metal grinder to grind down a weld. This caused the head of the tank to pressure. The corner of the tank head broke free, struck him in the side of the head/face, and then threw him back 5 to 6 feet onto the ground. The employee sustained cuts and scrapes, as well as injuries to his head, shoulders, and ribs.",1
An employee was stabbed in the back with a 4-inch knife and was hospitalized.,1
"An employee was picking up a 24-inch valve with an overhead crane. The valve fell, striking the employee on the foot.",1
"An employee was setting a rebar wall panel. After cutting the panel loose, the crane started to ascend. The employee held the crane choker to keep it from getting hung up on anything as it ascended. During this time, he got his finger pinched between the choker and the rebar. He was hospitalized with a potential broken finger on his left hand.",1
An employee cutting the end of a metal pipe amputated the left middle fingertip when a clamp loosened and struck the employee's fingers.,0
"An employee operating a metal press moved her left hand into the area of operation. The press cycled, injuring her third finger and partially amputating her fourth finger. The employee required surgery.",1
An employee was operating a truck-mounted crane when the jib fell off and struck the employee's leg. The employee suffered a compound fracture of the left leg.,1
An employee amputated three left-hand fingertips while clearing a jam on a plate machine.,1
"An employee stopped a conveyor belt and then climbed on top of it to clear a jam. Another employee, who did not know he was on top, turned the conveyor back on. The employee's hand got crushed between the two conveyor rollers.",1
"On 3/25/15, an employee received an amputation to the left index finger when the employee's glove came into contact with the moving router bit.",0
An employee suffered an amputation to his left index finger when it was crushed by a chain sprocket on a conveyor belt grain thrower. The chain sprocket was unguarded at the time.,0
"At approximately 8:10 p.m., on 3/25/15, an employee fell 20 to 30 feet from an articulating boom bucket to the ground. The employee was tightening bolts for mast arms on traffic signal lights when the clip tie-off point broke and the employee fell. The employee sustained cracked lumbar vertebrae and head lacerations.",1
"A Sanford Medical Center employee was injured when she tripped over an electrical cord. As she fell, she grabbed a med cart, which landed on top of her body and broke her leg.",1
An employee's right thumb was amputated while using a table saw to cut aluminum for stadium seating.,1
An employee operating a Wrangler (front-end loader) to unload the pebble line backed into an open area. The rollover cage struck a doorway where a door swings up into the dry fertilizer area. The door came off of the latches that were holding it up and struck him in the back.,1
"An employee was descending a ladder when his foot slipped through, causing him to fall. He put his hand out to break his fall, suffering a broken wrist. He was hospitalized.",1
"An employee in the wood department was cutting a small rip on a table saw when the employee's right pinky finger was severed and three other fingers were lacerated; the right pinky finger was surgically amputated. At the time of the incident, no push stick was used and the guard was not in place.",1
"An employee was injured while cleaning windows when the ladder he was climbing slipped out at the feet on a wet deck. The employee fell on his back onto the deck, suffering a fractured T-12 in his back and a mild head concussion. He was hospitalized overnight.",1
"An employee sustained a severe hand injury after a finger got caught on a piece of metal while descending a mobile stair tower. The employee tore a significant amount of flesh from the hand/finger, requiring hospitalization.",1
An employee amputated the right index fingertip.,1
An employee hit his head while traveling through a door on a scissor lift. He was hospitalized.,1
An employee's right hand and wrist got caught while helping a mechanic declog a piston.,1
"An employee was felling a tree. After the tree was cut, the top of it landed in a hickory tree, causing the felled tree to spring back and break the hinge. The base of the felled tree kicked back and hit the employee, injuring the ribs and the left ring and pinky fingers. The employee was hospitalized.",1
"Employees were hanging a horse head on a well. The injured employee was on a pumping unit, waiting for the horse head to be lifted with rig blocks, with a safety retractable line attached. The line got caught in the blocks and pulled the employee off of the pumping unit, causing the employee to fall 10 to 15 feet before the safety line engaged. At the point of engagement, the safety line snapped, and the employee fell to the ground.",1
An employee's fingers got caught in a grease pump gearbox. The employee's right index fingertip was later amputated.,0
"An employee was injured on 3/26/15 while working on an inactive, disengaged brake. The employee tripped and was struck by a counterbalance in the chest and abdomen.",1
An employee's right index finger was crushed between printing press rollers.,1
"An employee was stabbing up in the derrick while a pipe was being brought up on an elevator. As the employee reached to unlatch the elevator, the tongs engaged, striking the employee's left hand resulting in a broken wrist.",1
"An employee was sweeping around the MTB Machine. He bent over at the base of the conveyor and backed into a rotating shaft sticking out of the machine. The shaft caught his jacket/vest and pulled his left arm into it, resulting in multiple fractures. The machine was not shut down at the time.",1
"An employee on an elevated aerial lift was attempting to hang a dead-end structure on a pole. The wire he was holding contacted energized wires (7200 V), shocking the employee. He was hospitalized with burns to his right shoulder and the skin on his stomach.",1
An employee's left ring fingertip was amputated between two metal storage bins when an empty bin fell while being stacked.,0
An employee cut two right-hand middle fingers while using a 280-inch band saw. Guards were in place at the time of the incident.,1
"An employee was inspecting ropes from a ropes course. He fainted and fell while descending a ladder, injuring his left knee.",1
"An employee riding on a bus with a client attempted to adjust the liftgate. The bus operator engaged the gate, partially amputating the employee's left middle finger.",0
"Two employees were removing sludge with a vacuum hose and pressure washer inside a frac tank. One of the employees was hit in the foot with the pressurized water (approximately 3500 psi) from the pressure washer, blowing out the employee's boot. The employee sustained a pin-hole injury to the foot and was admitted to the hospital.",1
An employee was changing dies on a 400-ton Accupress brake press when one of the lifting bars slipped off the die and crushed the employee's hand between the base of the press and the die.,1
"An employee was working on a press machine when he got caught in two nip points, degloving his right hand. The guard on the folder section was bypassed at the time of the incident.",1
An employee was loading a steer into a truck. The steer got loose and attacked the employee.,1
"An employee was hospitalized with first and second degree burns to 20 percent of his body, on his left arm, shoulder, and back. The employee was preparing to load sand into the tickler attached to a paper machine. He opened the valve and was burned by hot water and flash steam at a temperature of approximately 108 degrees Fahrenheit.",1
An employee's left index fingertip was amputated by a blade bending machine in the fabrication department. The employee's finger got caught in a pinch point between the machine and a ram while bending the metal 30 degrees.,0
An employee injured his back while helping a client with a bath at his workplace.,1
An employee fell 30 feet from the roof area while installing a tin roof on a new building addition. The employee dislocated the left wrist and fractured the right elbow.,1
"An employee was driving a stand-up dock stacker forklift to pick up a pallet. He attempted to avoid hitting a stack of tires by turning the wheel sharply and lost his balance. His left foot became dislodged from the forklift, while his right foot remained on the lift; the lift was therefore still in motion. His foot became pinned under the tires and the forklift.",1
"On or about March 26, 2015, an employee was hospitalized after crushing two fingers while operating the rebar shear line.",1
An employee's nose was injured by a falling carpet while opening a trailer door.,1
"A PSI blower chip loading system plugged up and tripped the breaker. A maintenance employee locked out the machine, cleared the plug, and restarted the machine. The employee was checking for air flow through the pipes with his right index finger hanging at the stop plate when the mechanical sleeve lacerated the finger pad. The machine amputated a chunk of the right index finger pad. The fingernail and part of the bone were removed to close the skin around the end of the finger.",0
An employee was found near a night watch station located close to knife room #1. He was walking disoriented and was unable to speak or hear.  The accident occurred around 1:50 p.m.  He was hospitalized with swelling on the right side of his head.,1
"On March 26, 2015, an employee working on a power press reached his hand into the machine and hit a switch causing the press to engage causing a partial amputation of his right pinky finger.",0
"An employee was carrying a tray from the kitchen to the cafeteria. Another employee opened the door, which pushed the tray into the employee's chest. The employee complained of chest pain and was hospitalized.",1
"On 02/26/2015, at approximately 10:30 AM, an employee picked up an electric handsaw that was energized. The employee activated the handsaw with his right hand and amputated the middle finger from his left hand.",0
An employee fell and fractured a femur while walking up the exterior stairs at a client's house.,1
An employee was hospitalized due to injuries sustained when she fell to the floor at her desk.,1
"An employee at Quantum Metals in Lebanon, Ohio, was using an industrial belt sander when his finger got caught in the machine. His right ring finger was amputated from the first segment down to the first joint, and his right middle finger was amputated just below the nail.",0
An employee was struck by a wood wall while dismantling a movie set.,1
An employee was bending rebar when his finger got caught between a rebar and a pinch point. His right index finger was amputated.,0
A maintenance employee reached into the back of an evisceration machine and was injured when his fingers contacted the blade. His right ring finger was partially amputated. The machine was still on at the time.,0
"An employee lost their balance while descending the stairs of a John Deere QC-54. When the employee reached out to grab something, the wedding ring on the left hand got caught, avulsing the left ring finger from the second knuckle to the fingertip and removing the fingertip at the first knuckle. The rest of the finger to the second knuckle was removed during surgery.",1
"An employee was helping the overhead crane operator pour a ladle of molten metal when the ladle got wedged under the top railing. The stopper rod opened, and the ladle contents fell out, hit the floor, and splashed the employee. He sustained burns from his hip down to his shin area, with third degree burns on his legs. He also sustained burns to his face near the mustache area, as well as to one arm and both hands.",1
"An employee was unjamming a mixer when a door dropped down, fracturing his arm.  The employee was hospitalized.",1
An employee lost their footing while stepping onto some plastic debris and fell down a grade. The employee was hospitalized with a broken right femur.,1
"An employee was unloading a wire basket from a flatbed truck. As a crane began to lift the basket, he got caught by it and was lifted approximately 6 to 8 feet off the ground. He fell to the ground, breaking his leg and nose.",1
An employee was burned while lighting a propane-fueled smoker that flashed back on him. He sustained burns to the right side of his face and right arm.,1
"On or about 3/27/2015, at 10:00 AM, an employee was transporting a patient that was lying on a bed.  While pushing/pulling the bed, the employee felt discomfort in the back area. The next day, the employee felt pain in his lower back that extended to his leg. The employee was hospitalized.",1
An employee was exiting the site trailer and fell 3 feet.  The trailer stairs were removed at the time. The employee was hospitalized with lacerations on the back of the head and a fractured hip.,1
An employee was installing a sink faucet when he cut his finger on the edge of the stainless steel sink.,1
An employee amputated three left-hand middle fingers and part of the thumb in the station gears of a press machine.,0
An employee's left index finger was amputated at the first knuckle after she reached into a chain-and-sprocket drive mechanism. The mechanism was moving at the time of the incident.,1
"An employee was feeding metal stock into a straightening roll machine when his right index fingertip and glove got caught in the rollers, amputating the right index fingertip (without bone loss).",1
"An employee's finger got caught in a delimber while making repairs, resulting in an amputation of the end of the middle finger from the last knuckle.",0
"An employee was checking an skid loader's alternator when the motor fan caught his left hand, amputating the middle finger and severely cutting the pinky.",0
"On or about March 27, 2015, an employee operating a pasta machine had his arm amputated up to his elbow.",1
"On or about 03/27/2015, an employee was hospitalized with injuries sustained from getting caught between a brake and reel while pushing an empty paper spool.",1
An employee was operating a stand-up forklift when his left foot became trapped between the lift and an endcap for a rack. He was hospitalized with compound fractures and had his foot amputated.,1
"An employee in the carpenter shop was ripping 2x4's into to smaller slats when they made contact with the blade, resulting in the amputation of finger(s).",1
An employee was injured and hospitalized after being hit by a falling tree limb while felling trees.,1
"An employee experienced a shock and arc flash when cleaning the inside of electrical gear that was believed to be shut off. The employee received second and third degree burns on the face, hands, and arms.",1
"An employee descending a ladder lost his balance. He reached for something to stabilize himself and put his left hand through the guard on a machine's exhaust fan, breaking his left thumb and middle and ring fingers.",1
"An employee washing her hands in the bakery department tripped and fell, sustaining a broken hip. She was hospitalized and required surgery.",1
"An employee preparing to move a damaged light pole to make room for a new one caught his hand between portions of the pole after trying to section it out by cutting it with a reciprocating saw. The light pole bent, and his hand was caught between sections.",1
"Two employees were working in a JLG Lift to install instrument piping. An elevator door above them came loose from its slip and fell. The elevator door hit another object, which caused it to bounce outward and strike the lift basket and the injured employee.",1
An employee removing rocks from an auger suffered a finger amputation.,0
"While loading plants into a truck, an employee opened the back and was scraped by the door, causing a cut to the stomach area.",1
"An employee was cleaning/washing the counter in the ER department. She slipped and injured her head, neck, and lower back. The floor was wet at the time.",1
"An employee reached in to remove packaging materials from the six-line filler (yogurt machine). The machine was indexing and was not turned off at the time. She injured her left forearm, requiring hospitalization and subsequent surgery.",1
"On March 28, 2015, at approximately 1:00 p.m., an employee was stepping over the tongue on a cart and fell. The employee sustained injuries to the right arm and head, resulting in hospitalization.",1
"On or about March 28, 2015, an employee sustained a foot injury while operating a forklift, which resulted in the partial loss of the left foot.",1
Employees were connecting a drill pipe. The injured employee suffered a partial amputation to his pinky finger when it got caught between the pipe and tong.,0
"The incident occurred at a press, which rewinds rotating shafts and cycles out. The employee's arms got caught in the rewinder.",1
"An employee dropped a piece of PVC conduit on his thumb, breaking it and damaging tendons.",1
"The injured employee's coworker was moving a rear suspension with a Sky-Trac forklift in the salvage yard located off of Interstate 55, Exit 71, near Blytheville. A piece of the suspension broke off and hit the injured employee in the face, fracturing his jaw, eye socket, and forehead. He was hospitalized for facial reconstruction.",1
An employee sustained an electrical shock and burns to the hand during construction of electrical power transmission and distribution lines.,1
An employee was mounting a spare tire onto a wheel that was brought in by a customer. The employee began airing up the tire when the bottom of the wheel blew out and launched the wheel into the air. The wheel hit the employee in the arm and hand. The employee was hospitalized with a broken arm and thumb.,1
An employee sustained an injury when his foot got caught between a reach truck and a metal beam.,1
"An employee was using a step ladder to get an item for a customer. As she descended the ladder, she missed a step and fell. She was hospitalized with a head injury.",1
An employee fell on plastic pellets from a hopper and broke his left hip. He was hospitalized.,1
"An employee was conducting maintenance on a jet bridge when a telescoping air duct pipe disconnected and fell. It struck the employee on the right shoulder, knocking him to the ground.",1
"A maintenance employee injured his hand while checking for leaks on the high pressure hydraulic injection on a press. Hydraulic fluid was injected into his left hand, requiring surgery.",1
An employee went to unplug a piece of equipment and was shocked by a 480-volt dehumidification unit.,1
"An employee was helping to close a bay door that was jammed about 2.5 feet high. The door came loose and slammed down on the employee, trapping him underneath. He sustained a broken leg and was hospitalized for surgery.",1
An employee was found lying on the floor with cuts and abrasions to his head and face. The employee did not respond to his name. He was hospitalized.,1
Employee was struck by a forklift and broke his right ankle. ,1
"On March 29, 2015, at approximately 3:00 p.m., an employee sustained an injury to the middle finger and index finger on his right hand, resulting in amputation. The site port cover was removed from the door-facing press to blow out the fiber incline conveyor. The conveyor was not shut down at the time. An air wand got caught between the conveyor and tail roller, and the employee's hand was pulled into the framework between the air wand and the conveyor housing.",0
"An employee was using a hydraulic vise to secure an ""I"" beam to the band saw table. The power switch on the vise was triggered, causing the loss of his left-hand middle finger. The employee was hospitalized.",0
"On or about 3/29/15, at 2:00 PM, an employee working in the meat department was helping a customer that requested chicken. The employee proceeded to cut the chicken with a band saw when it slipped and amputated the tip of her right thumb. She was hospitalized to reattach the thumb tip.",0
"On March 29, 2015, an employee sustained an amputation injury to the pinky finger at the base of the fingernail. The employee was trying to keep two patients apart when one of them bit the employee's fingertip off.",0
"An employee was standing on a chair to adjust curtains. The chair slipped, causing the employee to fall and break the tibia just below the knee.",1
"On March 30, 2015, at approximately 3:05 PM, an employee that was directing plant operations climbed on a moving railcar. The employee got crushed between the ladder of the railcar and the bollard and was hospitalized with severe hip injuries.",1
"An employee was injured when she reached into a Bartelt Machine that was being repaired by a maintenance technician. The employee did not notice the maintenance technician and went behind the machine to remove a pouch from it. The machine caught the tip of her glove and pulled her hand back, amputating a portion of her pinky. The  maintenance technician was unaware of her presence.",0
"On March 30, 2015, at approximately 7:30 a.m., employees were using an overhead crane to move a sub-product (billet) from a lower level to a higher level. When the billet was situated on the higher level, the chain loosened; it toppled over and fell the down the stairs, striking the employee who was coming up to unhook it. The employee was hospitalized with a scalp laceration and spine fractures.",1
An employee was about to load his truck when a coworker deployed an outrigger that hit the employee's foot.,0
An employee was loosening some bolts and had his wrench (left hand) against an angle iron (brace). The wrench spun and caught a finger between the angle iron and wrench.,0
An employee's hands were caught in a Stephan mixing machine used for mixing dough and amputated his right-hand index and middle fingers.,1
An employee was struck and trapped by a tire he was removing. He was hospitalized.,1
"An employee was working inside a trailer with an approximately 7-foot-long tube. The tube is used to straighten the walls of the trailers and has a detachable base. The tube slid down the trailer wall, and the employee's left pinky finger got caught between the tube and the detachable base. He sustained an amputation injury from his first knuckle and was hospitalized.",0
"On Monday, March 30, 2015, at 12:38 p.m., an employee was standing on a 6-foot fiberglass ladder inside the entrance to the first floor when he touched an energized wire and received an electric shock. He fell from the ladder to the floor and fractured his left elbow.",1
"An employee was on a service call, replacing a sensor on a fleet truck. He stood on a battery box, and put his right leg on a cylinder to help hold his balance. His hands were occupied with hand tools in a position above his head. His left foot slipped, putting all of his body weight on his right foot and resulting in a fracture below the knee.",1
"An employee suffered second degree burns while removing a sidewall header from a boiler.  Debris blocked some water and was released onto the employee's arms, hands, and torso.",1
An employee lost consciousness and fell off of an A-frame ladder while working on a filling line. The employee sustained injuries and was hospitalized.,1
An employee was moving a 60-inch-diamater pipe on a manual roller table. His right pinky fingertip was amputated in a pinch point created between the metal pipe and the roller.,0
"An employee crawled into a packaging machine to clear a jam. The employee's right thumb got caught under the pressure plate, resulting in surgical amputation of the thumb tip.",0
"An employee was descending on a manlift at the first level. As he stepped onto the floor, he fell into the pit of the manlift.",1
"An employee's hand got caught between elevators and a derrick. The employee sustained a laceration between the ring and small fingers on the right hand, as well as a fractured small finger.",1
"On 3/30/2015, at approximately 1300 hrs., an employee was collecting recyclables for Lebanon Farms Disposal. After collecting recyclable materials, the employee mounted the recycling truck's side step. While the truck was traveling to its next stop, the driver noticed the employee laying in the street. The employee was hospitalized with a head injury.",1
An employee was injured when bridge piling fell on his leg during highway construction work.,1
"An employee slipped and caught his finger between two pieces of equipment. As the crossover sub fell, he was unable to remove his finger in time. He also broke his wrist.",0
An employee was walking up the stairs of a work-over rig when he lost his footing and slipped. He landed on the ground at the bottom of the stairs and fractured his hip.,1
"An employee working in the office fell over a laptop bag strap that was on the floor while walking. She injured her right hip, lower back, and right knee.",1
"The injured employee was holding a 1/4"" steel plate with another employee while a supervisor operated a crane to move the steel plate. The wind caused the plate to twist, and the injured employee's left hand got crushed between the steel plate and a truck. The injury resulted in an amputation at the hospital.",1
An employee was on a drilling rig floor during normal drilling operations when pressure built up and blew through a hole. The employee was blown backwards and hit his head and arm. His head and arm sustained lacerations. He was admitted to the hospital for surgery on a fractured skull.,1
An employee severed his left thumb while using a Skil saw to cut a 2 x 6 board.  He was hospitalized for reattachment surgery.,0
An employee was hospitalized after coming in contact with a racking system while operating a powered industrial vehicle.,1
An employee got his arm stuck in a printing press.,1
"While working on the roof of a new commercial building, an employee tripped and fell, landing on a steel purlin. The employee lacerated the left arm and required surgery and hospitalization.",1
An employee sustained injuries when he fell approximately 27 feet.,1
"An employee was operating a winch to remove a pump for servicing. The cables broke, pinning the employee between the winch and some equipment. The employee sustained an injury to the chest area.",1
An employee was feeding metal into a rolling machine to bend a part while looking at a computer screen. His hand got pulled into the roller.,1
"An employee was installing duct in a trench box. Because the trench was in an incline, the road plate shifted towards the box and pinched the worker's right forearm, causing it to break.",1
"Employee was sitting in a small, heavy, plastic lawn chair. The back of the chair broke away from the arms of the chair, and the employee fell to the floor.",1
"An employee was sliding wood under an extruder while being lifted by a forklift. The extruder shifted, and the employee's finger was crushed between the extruder and a pallet.",0
An employee sustained a thumb amputation when he attempted to unclog a rotary valve. The machine was not locked out at the time.,0
"On March 30, 2015, an employee was using a hand-held grinder when it slipped from his hand and struck his left knee. The impact from the grinder left an abrasion that later became infected and required hospitalization.",1
An employee was servicing a labeling machine. He waved his hand past the light sensor to activate the labeler and got his ring finger caught between the chain and sprocket.,0
"An employee was using a retractable-type box cutter to cut plastic wrap material for a display case/stand.  While cutting the plastic wrap, the employee lacerated his left leg and thigh with the box cutter. He was hospitalized.",1
"A 250-pound tank was being slid from the forks of a forklift into a frame when the injured employee's hand got caught between the frame and the tank. The employee's right-hand, middle finger nailbed was amputated.",0
"An employee working from a ladder was installing a pipe when a fitting came loose. The pipe fell, struck the employee's left leg, and caused him to lose his balance. He fell down the ladder and broke his right heel.",1
"An employee was installing a 3""-diameter syphon pipe with a small valve on a tank car. The employee inserted the pipe into the tank car. The gasket moved, so he lifted it up by hand. While it was in the air under his power, he lost his grip and smashed his palm between the valve and a stud, breaking bones.",1
"On or about 3/31/2015, at approximately 9:00 p.m., an employee's left arm got caught in a bowling pin resetting machine. The employee reached into the side of the machine to adjust a pin and the machine cycled. The machine was not de-energized at the time of the incident. The employee sustained soft tissue injuries and was hospitalized.",1
An employee was working on a ladder removing screws from a wall when the ladder slipped and the employee fell to the ground.,1
"An employee suffered an amputation of his left, little fingertip when the folding chair on which he was sitting collapsed.",0
"An employee's shirt got caught on the coil winder, pulling her into the machine. She was not wearing her apron at the time.",1
"On March 31, 2015, an employee was working at Gardner Denver Nash in Charleroi, Pennsylvania, when he was injured while operating a radial arm saw. The employee suffered fractures and lacerations to the second, third, and fourth digits on his left hand. He required surgery and was hospitalized.",1
"On March 31, 2015, at approximately 7:15 p.m., an employee was closing the gate when it fell off its wheels and onto the employee.",1
"An employee was operating an injection molding press machine. The injured employee pulled a part out of the press through the door. The door jammed when the injured employee tried to close it, so the employee reached inside the machine to clear the jam. The employee's hand got caught by a machine part; the employee's thumb tip, including part of the thumbnail, was amputated.",0
"An employee was adjusting the rigging holding up a 3'9"" tall manway door when the door came loose and fell on the employee's foot.",1
"An employee was removing forms from a column using a positioning hook. When the form came free, the employee fell with the form approximately 5 feet to the ground.",1
An employee's finger was crushed under a wheel chock while moving a trimmer vehicle. The employee sustained a partial amputation of the left pointer finger.,0
"An employee was collecting plastic scrap in a tote near a press when she tripped and fell backwards, hitting her head on the concrete floor.",1
"An employee tripped on an electrical cord and fell to the floor, sustaining a broken hip.",1
An employee fell approximately 9 feet from a ladder while ascending to the main deck. The employee was hospitalized with fractures to the number 10 and 11 ribs and a cracked L1.,1
An employee was riding a three-wheel trike through the plant when he struck a forklift. He sustained a fracture to the face at the cheekbone and temple. He also sustained small cuts on his shoulder and hand and was hospitalized overnight.,1
A mason employee fell more than 40 feet from the roof of a building after hitting a hydro-mobile while coming off the roof. The employee was wearing a harness and had retractable fall protection available at the time of the incident.,1
"An employee was trying to set up a trim die on a thermal molding machine when his left forearm, thumb, and index finger got crushed. The machine was not locked out at the time. He was hospitalized and required surgery.",1
An employee was helping a coworker remove a forklift that was lodged in the mud. The employee bent over to place boards for traction under the front wheels of the forklift. The coworker used another forklift to lift the lodged forklift out of the mud when the fork slipped off of the wheel frame and struck the employee above the left eye.,1
An employee injured his fingertip while rebuilding a down-hole tube.  He was taken to the hospital where part of his finger was amputated.,1
"An employee was manipulating a piece of wood on a conveyor when his finger became caught between the conveyor and the piece of wood, causing a partial finger amputation.",0
An employee was struck by boards being transported by an ATV in the cemetery.,1
"An employee got tangled in a computer cord at her desk and then fell to the ground, fracturing her left arm and requiring major surgery; she also bruised her left ankle and foot.",1
"On or about 3/31/2015, at 9:40 a.m., an employee was picking up garbage. The employee was walking toward a garbage can when he slipped and fell on his back.  Coworkers helped him up and kept working until the employee fell again and could not get back up on his feet. He was hospitalized.",1
"On March 31, 2015, an employee amputated his right middle fingertip when it contacted a part he was deburring on a rotating lathe.",0
An employee was shocked and received third degree burns while working inside of a 480-volt panel. The panel was not off at the time.,1
An employee fell on a bed alarm cord after adjusting a bed on 3/31/15. The employee was later hospitalized with a fractured hip and required surgery.,1
"An employee was climbing a tree; he tied into the tree, but the tie-in point broke. The employee fell to the ground, sustaining a broken leg and wrist.",1
"On or about 3/31/2015, at approximately 9:50 p.m., an employee was hospitalized with a chin laceration. The employee was operating a mechanically powered hot trim press. After the press cycle, the work piece became stuck in the upper die of the press. The work piece then fell from the die and struck the hand tongs the employee was holding, which caused the tong's handle to strike the employee in the chin.",1
"An employee was moving a sheet of steel (300 lbs.) with an overhead hoist. The employee was using a magnet to move the metal from the grinding area to the finished stack. When the sheet was over the finished pile of sheets, the magnet released; the sheet fell on his hand, crushing the left middle and ring fingers. He was hospitalized.",0
"An employee was grinding at a pedestal grinder on a small piece of work. The work had been set in place using vice grips. The work slipped from its placement, moving and lodging into the space between the work rest and the disc. The employee's left hand was also moved by the force into this area, lacerating/crushing his index, middle, and ring fingers.",1
"An employee fell 16 feet from a bunk silo, breaking his leg and requiring hospitalization.",1
"While removing a submersible motor from a hydro testing tank, an employee came into contact with the 3200-volt cord running from the motor to the Hipot/Megohmmeter, resulting in an electrical shock.",1
"An employee tried to remove a piece of tape on the housing of a Quackenbush drill he was operating. While reaching around to do so, he became caught in the moving shaft and lost approximately 1/2 inch of his left ring finger.",0
"An employee suffered severe burns to his nose, eyes, forehead, right forearm, and the frontal region of his neck when pressurized, hot product exploded and sprayed on him as he was looking in the cooker machine.",1
"An employee was moving a winch on a cart when a drain in the floor caused the cart to tip and the winch to fall. While trying to grab the falling winch, the employee's thumb was smashed against the floor.",1
"On 4/1/2015, at 4:20 PM, an employee was injured when a coworker operating a PIT contacted the employee's left ankle. The employee sustained micro-fractures and swelling of the ankle, requiring overnight hospitalization.",1
"An employee was standing underneath a pole when a mass pipe came loose, fell 185 feet, and hit the employee's leg. The employee sustained a compound fracture to the leg and was hospitalized.",1
An employee was injured from being bitten by a client.,1
An employee was cutting metal stock using a horizontal band saw when the employee's right index finger got smashed between the stock and the fence of the band saw. The injury removed the flesh from the tip of the right index finger.,0
An employee was attempting to move a weld table with an overhead hoist when his finger got caught in the chains. He sustained a distal amputation to his left index finger.,0
"At approximately 3:45 AM on April 1, 2015, at the Interbake Foods LLC bakery in North Sioux City, South Dakota, the injured employee was helping other employees move a rotary molder machine by hand. While moving the machine, his right index fingertip was amputated halfway down his fingernail by the hinge on a 2' x 2' control panel box attached to the rotary machine.",0
"An employee working with a pry bar was checking if a bolt hole was properly aligned on the axle of a garbage truck. The axle slipped while his finger was in the hole, amputating his fingertip.",0
"On or about 4/1/2015, at approximately 9:30 a.m., a maintenance employee received an amputation injury to his right thumb while operating a lathe. The employee was using an Emory-type cloth to smooth a part in the lathe when his glove got caught on the part, cloth, and/or machine, causing his injury. He was hospitalized.",0
"On or about 4/1/2015, at approximately 8:30 a.m., a PIV ran over an employee's foot. The injured employee was talking with the PIV operator about a process. After they finished taking, the PIV driver began to turn and reverse and ran over the employee's right foot. The employee was hospitalized overnight.",1
"On or about 4/1/2015, at approximately 7:00 p.m., an employee bypassed an interlock device by climbing over a guarding fence and reached into the cushion roller portion of a material handling system. The machinery was not de-energized at the time. The rollers caught/struck the employee's right hand and arm. The employee was hospitalized.",1
"On or about 4/1/2015 at 2:00 PM, an employee was trimming a ficus hedge using a pole pruner. The pole pruner got stuck in the branch that the employee was trying to cut, so the employee yanked it. The pruner made contact with a power line, which shocked the employee; the employee was unconscious for approximately 1 minute. The employee also sustained burns to the left-hand index finger, as well as ankle burns. The employee was hospitalized overnight.",1
"An employee climbed a closed stepladder that was leaning against a wall. He was carrying a trash can to put it up onto a storage mezzanine. As he swung the can up and released it, it struck the building, ricocheted back into him, and knocked him off the ladder to the floor.",1
"An employee was pouring hot caramel from a bowl to a pan. The caramel spilled, causing the employee to sustain second and third degree burns to both hands.",1
An employee was clamping a light onto a battery cable when the motor fan turned on and cut the end of his right index finger off.,0
An employee was attempting to slide a patient onto the CT stretcher when his legs gave out and he fell to the ground. He was hospitalized with a back injury.,1
An employee with a sledgehammer struck the injured employee's left middle finger while he was holding a board. The injured employee's fingertip was amputated.,0
"An employee pulled on a rope that opens an overhead hatch. The rope broke, causing the employee to lose his balance and fall 30 inches. He broke his hip and required hospitalization and surgery.",1
"An employee was operating a Raymond stand-up lift in an aisle. As he turned to come back down the aisle, he looked up and saw a concrete pole ahead of him. He extended his left leg to stop the lift. His leg got caught between the post and the lift, fracturing his medial tibia plateau.",1
An employee was walking/working in an aisle when a metal tray weighing approximately 350 pounds was knocked off the third shelf of an adjacent racking system. The tray hit the floor and then hit the employee. He suffered a fractured left femur and a hematoma over one eye.,1
An employee was troubleshooting a pneumatic ram located in the CYA unit. The employee's left index fingertip got caught in the ram.,0
"An employee was operating a core pusher machine when her left index finger got caught between a hydraulic ram head and the machine itself, resulting in a partial finger amputation.",0
"An employee was feeding trim into a roller when the machine became jammed. The employee went to the rear of the machine, opened the door, and began pulling fiber from the duct work. He reached into the back of the duct work towards the machine; his hand was injured by the rollers.",1
"A crew of four employees was waiting for a concrete truck to arrive at the site to fill the excavation. The crew found that a water reclamation pipe had a leak and sprayed water onto the 4-foot-high excavation wall. Some of the dirt fell back into the excavation, so the injured employee entered the excavation to shovel it out. While he was in the excavation, additional dirt and a piece of parking lot asphalt collapsed into the excavation and struck him.",1
"While cutting a 2x6 board with a chop saw, an employee suffered an amputation of his left-hand thumb.",0
"An employee suffered an injury when his feet and body were pulled through the rollers of the unfolder machine. The employee's feet were tangled on plastic that was on the floor. When the employee reversed the machine, his feet were pulled into it.",1
"An employee was walking in the parking lot and slipped on ice between 5:30 AM and 6:00 AM on April 1, 2015. The employee was hospitalized and sustained two broken ribs and a subdural hematoma.",1
"An employee was coupling trailers. One of the trailers rolled forward, pinching the employee's thumb in the pintle hook.",0
"An employee was attempting to uncouple a railcar. The car rolled forward, trapping and crushing the employee's left ring finger. The employee required surgical amputation.",0
An employee was repairing an AC unit while working from an A-frame ladder. He fell off of the ladder and struck his head and shoulder on the ground.,1
"On April 1, 2015, an employee amputated his left index finger while cutting wooden stakes using a circular saw. He was hospitalized.",1
"An employee was painting the top of a doorframe while standing on stilts approximately 3 feet off of the ground. He turned to speak to another employee who had spoken to him; while doing so, he bumped his hard hat, causing him to slip and fall to the ground. He fractured his right arm and left elbow. He was hospitalized.",1
An employee got her foot stuck under a dolly and lost her balance during aircraft-loading operations. She fell and broke her left wrist.,1
"An employee was using a grinding wheel on an engine lathe to grind a roller into specifications. The employee reached around a guard to adjust a belt. The grinding wheel caught the employee's right index finger, amputating the first joint.",0
"An employee climbed onto a scaffold to place his tools on the wall. He reached a section on the scaffolding where he needed to stretch to reach and removed the guarding at the end frame. When he went back to work in the area, he fell through the unguarded section, breaking his knee caps.",1
"On April 1, 2015, the employee was participating in a training session at Las Cruces, New Mexico. At approximately 7:15 p.m., the employee exhibited signs of heat exhaustion and was hospitalized.",1
"An employee was setting up a valve in a lathe. He was tightening the lathe chuck with an Allen wrench; when he tried to remove the wrench from the chuck, his left middle fingertip got caught between the Allen wrench and the machine.",0
An employee fell from a single story when the employee's work belt was caught on the edge of a man basket.  The employee sustained a broken leg and arm.,1
An employee was injured when his finger got caught in a batter applicator pump.,0
"An employee fell from a two-rung step ladder while cleaning the company's private airplane, fracturing his left hip.",1
"An employee was removing the track on a dozer when the track slipped and pinched the employee's pinky finger between the track and a 1"" pneumatic impact wrench. The employee sustained a left pinky finger amputation.",0
"An employee was taking a lawn mower deck out of a crate. The employee was sliding the deck forward to put the wheels back on when the deck started to drop. The employee's finger got caught between the gauge wheel bracket and the crate, amputating the tip of the left-hand ring finger.",0
"An employee was at a meeting. When he stood up from the table, his foot got tangled in a cable, causing him to fall and injure his hip and elbow. He was hospitalized and required surgery.",1
"An employee running a CNC routing machine tried to manually push down a part that he thought was loose while the machine was cutting it. He got stuck between the moving arm where the router cuts and a stationary arch. He was pinched, fracturing two left ribs and his shoulder.",1
"An employee experienced a fractured mandible while attempting to loosen a bit on a stationary/mounted core drill.  The pipe wrench in use slipped, striking the employee in the face and causing her to fall and strike her forehead, hand, and thumb on nearby shelves and the floor.",1
"An employee was disposing of 12-gauge shotgun shells with a single-shot, 12-gauge shotgun and had disposed of several shells. After a period of disposal, the gun barrel split, causing metal pieces of the gun barrel to strike the employee 's right shoulder.  The employee was hospitalized for surgery to remove the pieces of metal.",1
An employee working from a platform began descending a ladder while attached to a climbing assist device. The employee reached up to close a hatch above him to prevent an open space where two other employees were working. The employee bumped the hatch and it came down on his right thumb.,0
"An employee fell while she was walking into work. Her foot slipped on a step, causing her to fall and injure her leg.",1
An employee was walking between empty baggage carts when the baggage tug operator drove over her right foot.,1
"On or about 4/2/15, at 3:15 p.m., an employee was moving a catwalk that provided fall protection at elevated positions during  manufactured home building. The catwalk tilted while being moved. The employee was struck by the falling catwalk and his right foot was crushed.",1
"An employee was using an overhead crane to set a jacket on a rail car. The employee's right hand was caught between the jacket and underframe, crushing his right-hand ring finger. He was hospitalized overnight and required surgical amputation of the finger.",1
"An employee was polishing a piece of a metal rod in a lathe. The employee's right hand got pulled into the lathe, amputating the ends of the two middle fingers.",0
An employee amputated his finger in the back room while stocking product.,0
"On April 3, 2015, an employee was adjusting the height of the finger jointer machine when  the carriage came forward and amputated the tip of his right middle finger.",0
"An employee was attempting to connect a drill stem to a drill rod inside a bore hole. He was straightening the rod in the hole with his right hand and was using his other hand to run the controls. The cable was still connected at this time.  He lowered the drill rod and used his hand to connect the slipper or hoisting cable from the drill rod in the hole. The cable and the drill rod started to spin around, pulling in and causing an amputation to his right hand and arm.",1
"Employees were replacing equipment to install a cannon ball. As they were replacing the equipment, an employee bumped one of the valves. Pressure was released, spraying onto the employee's neck.",1
An employee's legs broke in several places after being struck by an automobile that crashed into the facility.,1
An employee pinched his finger while removing plywood from a work area. His finger got caught between the concrete and plywood; he was hospitalized.,1
"An employee placed his right hand under the guard on a roller machine to push fabric back onto the roller. His right hand got caught between two rollers, resulting in lacerations.",1
"An employee was pressure-washing a metal belt using a diluted solution of Oxofoam (a corrosive material). The spray contacted the employee in the neck/shoulder area, causing chemical burns to the skin.",1
An employee went to a customer's new construction site to look at a paint issue. He went upstairs to the second floor hallway to look at the issue and stepped back into an open area with no railing installed. He fell 10 feet to the ground and was knocked unconscious. The employee fractured his ribs.,1
"An employee was dismantling a scaffold while unaware that he was tied off onto it. He fell from the scaffold, approximately 7 feet to the ground below.",1
An employee was moving radiators when the tip of his pointer finger got caught underneath and was amputated.,0
"An employee had finished unjamming logs in the log deck when he asked a coworker to use a log turner on the logs. The area was not completely cleared when the coworker used the log turner. One of the logs escaped and rolled onto the employee, injuring his left knee, fracturing his left fibula, and lacerating his right elbow.",1
"A maintenance employee was inspecting equipment with an equipment consultant. The employee was pointing at a tray wrapper when the machine started, trapping and amputating the employee's right index finger.",0
"An employee was moving a road sign when the sign got caught in wind. The employee fell over with the sign, requiring overnight hospitalization for a punctured lung and broken rib.",1
"On 4/3/2015 at 9:45 a.m., an employee was placing cardboard in the cardboard bailer. The employee closed the gate on his hand, amputating his left middle finger at the first knuckle.  He was hospitalized.",0
"Employees were installing tables in a metal form to be put into concrete. The table shot out and hit an employee, going through one end of the employee's leg and out the other end.",1
"An employee jumped from the back of an F-450 truck because the pulley hoist tipped over, resulting in injuries.",1
"An employee was hospitalized on April 3, 2015, after suffering an injury on the Blow-Mold Machine.",1
"An employee drove a golf cart into a brick wall, injuring her chest and abdomen.",1
"An employee fell from stilts while installing acoustical ceiling, sustaining a shattered or broken right kneecap and requiring hospitalization.",1
An employee was carrying a box he picked up from a pallet when he caught his shoe on the edge of the pallet and fell.,1
"An employee was unpacking cosmetics when she tripped over boxes, sustaining a left hip fracture. She was hospitalized.",1
"An employee was putting hurricane clips on the first landing of the stairs using a 4-foot ladder. He had one foot on the window sill and one foot on the ladder. There was dew on the window sill.  He slipped and fell to the ground, breaking his right elbow and suffering a concussion and bruises on his forehead.",1
"An employee was decorating the church sanctuary for Easter. He was going up the steps to the platform when he tripped and fell backwards, breaking his hip.",1
"An employee smashed his finger while moving drums from a pallet, resulting in a fingertip amputation.",1
"An employee attempted to stop a stand-up forklift with his foot. His leg got crushed between the forklift and a rack post, requiring hospitalization.",1
"On or about April 3, 2015, an employee fell 18 feet while working on metal decking inside the Nissan Paint and Body Plant.",1
An employee was struck by an asphalt roller. The injured employee dismounted the roller to clean the front drum. Another employee got on the roller and ran over the injured employee's legs. There was no evidence of an equipment malfunction.,1
An employee's upper left arm was surgically amputated at the shoulder after it was pulled into the cubing machine during sanitation.,0
"A maintenance employee was repairing a mixer discharge hopper from a plank that had been laid across the hopper. The employee was sitting on the plank and working from it. The employee fell through the boot of the hopper, approximately 14 feet to the concrete floor below.",1
An employee fell between the dock and a moving truck. His hand was crushed by an aluminum ramp he was carrying.,1
"On April 3, 2015, an employee reached over a guard and suffered injuries to the fingers on his left hand when the machine cycled. The employee was hospitalized.",1
"On or about April 3, 2015, at approximately 10:30 p.m., an employee was operating a pallet rider in the warehouse when his ankle got caught between the pallet rider and a post. He suffered a left ankle fracture and was hospitalized.",1
"An employee injured his leg while delivering some pipe to the Rio Blanco laydown yard off of County Road 5 in Mesa County, Colorado. The employee was helping the driver remove the pipe from a flat bed. When he removed the pipe bindings, one of the pipes fell off and struck his leg.",1
"On April 3, 2015, at approximately 10:30 a.m., an employee was installing a beam on a commercial medical building when the ladder he was on gave out. He fell approximately 10 feet, fracturing his hip bone and injuring his wrist.",1
An employee was using a Hobart slicer in the kitchen to cut onion when she amputated her right ring fingertip and fractured her right middle finger.,0
An employee amputated her right-hand thumb while removing cheese from an automated food slicer. The blade had not stopped turning at the time of the incident.,0
"An employee was working on the pipeline. A pipe came off of the trough and coiled on the floor. The employee tried to straighten out the coiled pipe. His feet became tangled in the pipe, causing him to fall to the floor. He fractured his hip.",1
An employee fell from a ladder and broke his leg.,1
"An employee was pumping diesel fuel from a fuel cell in the back of a pickup truck when the fumes flashed. The employee suffered second degree burns to his left arm and minor burns to his head, face, and chest.",1
An employee fell from a 15-foot-high ladder.,1
A drill alignment template fell on an employee's hand and injured three fingers.,1
"An employee parked on a ramp, then opened the railcar door. The employee's right thumb got caught between the ramp and door, causing a partial amputation.",0
"On Saturday April 4, 2015 an employee's hand got caught in a de-palletizer, requiring hospitalization.",1
"On or about April 3, 2015, an employee was injured and hospitalized while using a winding machine. The bus bar caught the employee's jacket and pulled the employee into the winding coil, breaking the left arm in two places.",1
An employee was injured and hospitalized when she fell from a 10-foot step ladder.,1
An employee fell from a scaffold.,1
Two employees collided while serving food. One employee fell and broke her right hip. She was hospitalized.,1
"The employee was sprayed by caustic when a 1/2"" tubing broke while preparing a 3/4"" line for maintenance.",1
Employee was burned when cleaning fryer.,1
An employee entered the rotational molding unit/oven to retrieve a pin that fell out of a mold.  The employee was struck by rotating fan blades. The employee was hospitalized from the injuries.,1
"An employee was standing up on a moving pushback. He lost his balance, fell, and hit his head and arms.",1
An employee's left middle fingertip was amputated after getting caught in the door.,0
An employee tripped in the testing department while walking from one area to another.  He fell to the concrete floor and landed on his left hip.,1
An employee preparing for food service passed out in the walk-in refrigerator while reaching for supplies.  The employee was hospitalized.,1
"An employee standing on an elevated dock leaned against the guardrail system. The rail system gave way, allowing the employee to fall 8.5 feet.",1
"An employee was putting pies in a pie display case when her finger got caught on the side of the display door. She suffered a deep laceration and fracture to her left pinky finger, requiring surgery.",0
An employee suffered a partial amputation of the left-hand index finger at the first knuckle while working with a hydraulic lift gate system on a truck. The system was in operation at the time of the incident.,0
"An employee was replacing breast cable when a barge stay rope broke free. The rope hit the employee in the back, knocking him to the ground. He landed on his face.",1
Employees were changing out old aluminum electrical cables and replacing them with new cables.  The cables were in conduit.  The cable to be removed was de-energized.  The employee cut an energized cable and received burns on his right cheek from the resulting electrical arc flash.,1
"An employee was trying to dislodge an airline shipping container that got stuck while transferring freight via elevator equipment from the airplane cargo to a truck. He climbed onto the elevator and got his left middle finger caught on the elevator, amputating his left middle finger at the first digit below the nail.",1
"An employee was injured while working at the recycling yard. He was standing on top of metal sheets and was catapulted between the metal sheets and a forklift. The metal sheets fell on top of him, causing major injuries to his head, back, hand, and leg.",1
An employee's left index fingertip was amputated when he was removing a clamp from a part in the mill. The finger was pinched between the clamp and a bolt.,1
An employee reached under the guard of the punch press to clear a bottle jam. The trimmer came down and cut his right thumb.,1
"An employee was exposed to mice feces particulates during shop facility cleanup on 4-6-15, where he contracted the Hantavirus.",1
An employee was participating in a 3-mile march carrying a 45-pound pack as a work capacity test. He experienced labored breathing and lower leg cramps. He was hospitalized.,1
"Employees were dismantling a scaffold by passing the scaffolding materials in a chain.  One employee dropped a 5-foot scaffold pole at a height of approximately 35 to 40 feet.  The pole fell straight down, striking an employee on the ground on the brim of his hardhat.  The employee fell backwards, hitting his head and suffering head contusions.",1
"On Monday April 6, 2015, an employee sustained a right index fingertip amputation after her finger got caught between inspection racks.  The employee was operating a machine that is actuated by a foot pedal.",1
"On April 6, 2015, an employee working on a rig sustained a head injury that required stitches after falling approximately 5.5 feet from the top of the scavenger tank/platform to the matting board.  Guardrails on top of the platform were removed at the time.  The employee was hospitalized overnight.",1
"The microphone/cord of a radio became entangled in a hose feeding Peroxyacetic Acid to a flume operation. When the employee stood up, the mic pulled the hose from the operation; his face and neck were sprayed with acid.",1
An employee's foot got caught between a stationary work table and a rolling piece.,1
An employee had to have the tip of his right middle finger amputated due to an injury.,0
An employee was directing a forklift driver when the forklift backed into him. The employee was hospitalized with injuries to both legs.,1
An employee was unstrapping packs from an A-frame railcar when a pack of five railroad ties fell from the railcar and struck the employee's leg.,1
"An employee received an abrasion on the second right toe, which escalated to and infection and required amputation.",0
"An employee was delivering a parcel at a residence. She went up three steps and handed the package to the resident. When she came down the steps, she tripped and fractured her ankle. The steps were wet at the time.",1
An employee was hospitalized after falling from a height while joining two steel beams together.,1
"An employee was feeding cable into the nut tester machine, which has crimp jaws. He held the cable with his left hand and used his right hand to hit the two-hand control, causing the crimping jaws to amputate his middle fingertip.",0
"An employee was pouring molten lead into molds. When lead solidifies, the lead is removed from the mold using an eye bolt and chain attached to a bolt that is poured into the lead cylinder. The employee attempted to lift the lead cylinder from the mold, but the mold was stuck to the lead. The employee attempted to clean the surface of the floor underneath the mold using his hand while the mold and lead cylinder were suspended in the air. The mold released from the lead cylinder and struck him in the right thumb, amputating the thumb behind the thumb nail.",0
"On or about April 8, 2015, an employee amputated the tip of his right index finger when reaching into a peen machine to clear a jam. His index finger got caught between the plastic and the blade. The machine was still running. Protective gloves were not worn at the time of the incident.",0
An employee received an electrical shock when he placed a tool on to a hanger located at the end of a supply cabinet.,1
"An employee fell through the roof while carrying a metal panel. The wind caught the metal panel, dragging the employee over to an opening in the roof.  The employee fell and cut his forearm.",1
An employee was feeding branches into the chipper when his arm got pulled into it. The employee's forearm was amputated.,0
"An employee was moving a large metal plate with a forklift. The metal plate was slung under the forks of the lift. As the employee guided it, the load fell and amputated the tip of the employee's left index finger.",0
"On Tuesday, April 7, 2015, a maintenance employee was standing on the fourth step of an 8-foot step ladder, reaching with a pole to unjam an overhead mail tray. He fell from the ladder to the ground below, fracturing his hip and requiring hospitalization.",1
"An employee was cutting a wooden 2-by-4 board.  As he cut close to his hand, the saw kicked back and pulled his gloved thumb into the blade, severely cutting his thumb just below the nail.",1
An employee was standing near the loading dock inside the warehouse when he was struck by a forklift. The employee's big toe was amputated.,1
An employee was cutting frozen Cornish hen with a band saw when he amputated the tip of his left ring finger.,0
"An employee's right index finger was amputated at the first knuckle, resulting in overnight hospitalization.",1
"An employee was unhooking the air hoses and components of a tractor trailer so he could separate the trailer from the tractor semi-truck. As he stepped down from unhooking the components, he missed the second step and fell to the ground, breaking his left hip. The employee was hospitalized and underwent hip surgery.",1
An employee was walking beside a truck that was stalled on the highway. The truck trailer then knocked the employee over and ran over both of his thighs. His right thigh and left foot were fractured. The employee was hospitalized.,1
An employee fell from a ladder.,1
"An employee working on the sanitation crew at the Further Processing Plant pushed the stop button on a breading machine after removing parts from the upper portion of the machine. The employee then placed his foot into a horizontal auger while climbing down from the machine, causing all five toes on his right foot to be amputated.",1
"An employee was operating a hydraulic trailer ramp when it fell on the employee's foot, breaking his ankle.",1
"On 04/07/2015, an employee lost her right-hand, middle fingertip when she got her hand caught in a rotary press while processing a small piece of foam through the router table.",0
Employees were using a hydraulic lift to put equipment on a truck. The injured employee suffered an amputation when his finger got caught between a metal bar and a hook on the hydraulic lift.,0
An employee operating a CNC routing machine sustained lacerations and experienced great blood loss after manually holding the part being cut by machine down with his hand.,1
An employee was servicing an in-feed roll when the come-along chain came off and pinched the employee's right-hand thumb. The employee lost the tip of the thumb on his right hand.,0
"An employee was parking an electric cart. When she stepped on the brake, the vehicle accelerated and collided with the side of the building, breaking her leg.",1
"While unloading a trailer, the trailer shifted and hit the employee in the leg.",1
"An employee was using a grinding machine to level concrete floors. The machine blade got caught in the ledge, pulling the machine forward and breaking the security barrier. The machine and the employee fell 10 feet.",1
"On 04/07/2015 at 6:30 p.m., an employee feeding wood into the web saw had his right index fingertip amputated 1.5 inches.",0
"On April 7, 2015, an employee sustained a leg injury that required surgery after being struck by a wheelabrator rack while moving the equipment with an overhead crane.  The load shifted during movement, causing the rack to fall over and crush the employee's leg.",1
"An employee was hooking a trailer up to a truck with a coworker. The hitch got stuck; while attempting to unhook the hitch, the employee placed his hand on the hitch. The coworker lowered the trailer, and the employee's right, third fingertip got amputated after getting caught between the hitch and trailer. He was hospitalized.",0
"An employee was working on a line that manufactured two-ply paper towels in the converting area.  While attempting to rethread a sheet to create the two-ply, he fingers got pinched between two rollers. He sustained a laceration of the third and fourth digits and a partial amputation of the distal tips; no digits were fully amputated.",0
"An employee was troubleshooting an assembly line in the needle assembly area. When he bent over to look at the bottom of the machine, he rested his hand on a guard on the belt assembly. His finger overlapped with the edge of the guard, tripping a motion sensor that activated the machine push bar. His right-hand middle finger got caught between the push bar and the machine.",0
"An employee was operating the nose drill machine when he went around to the machine's back side. The drill caught his work glove and pulled his hand in, amputating his left ring fingertip (no bone included).",0
"An employee became dizzy, fainted, and struck his head on the doorframe when he fell to the ground.",1
An employee amputated his finger while cutting a piece of wood with a table saw.,0
An employee standing on his delivery truck's bed fell off and hit his head on the pavement. He was hospitalized with head injuries.,1
"An employee was tasked with cleaning and sanitizing the chilling machines and the floor. The employee fell into the chiller machine while it was in operation, sustaining a leg amputation and requiring hospitalization.",1
"An employee was working near a stack of square hollow structural steel members. An unloaded gantry crane made contact with the stack and knocked over members. Falling members pinned the employee's leg against an adjacent stack, breaking both ankles and requiring hospitalization.",1
"At approximately 3:45 p.m., on 04/09/2015, a Composite Department employee hit his knee against a cart when he turned a corner. At approximately 10:30 p.m., he lost consciousness. The employee was hospitalized.",1
"An employee's right hand and upper arm got caught while loading clothing into a baling machine used to form 100-pound, shippable units of recycled articles of clothing. The machine got activated during the strapping process to secure the load at various points. His hand/arm were caught inside the machine for at least three hours, causing a laceration and fracture.",1
An employee amputated a toe at the Quad B construction site.,0
"An employee was removing a printing press gear that was located in front of a gear that runs an ink roller. While performing this task, employees do not de-energize the ink roller gear because the ink will dry up. The employee's finger got caught between the gear being removed and the ink roller gear. The employee's left index finger was amputated, and two other fingers were injured.",1
An employee fell from the trailer of his truck and struck his head.,1
"An employee fell approximately 15 feet from a fiberglass extension ladder while cutting a cable line at the mid line. The employee was wearing PFAS, but the positioning belt was not connected to the line. The employee sustained a broken collarbone and shoulder.",1
An employee was jetting tubes for the scrubber cooler tube sheet at ADM. He suffered a laceration when a high-pressure lance grazed his left arm below the elbow.,1
"An employee hit her head on a fitting room shelf while throwing away trash. She felt dizzy and went to the break room to sit down, where she had a seizure. She required overnight hospitalization.",1
An employee was working from a catwalk while loading an open dump trailer. The cone section of the storage hopper he was drawing from fell off and struck him in the head and hand. He was hospitalized and required hand surgery.,1
An employee suffered exposure to an unknown gas on 4/8/2015.,1
"An employee was taking inventory of ""elements"" in the warehouse. The items were stacked on a pallet that rested on a shelf 38 inches from the floor. To obtain an inventory number for one of the elements, he pushed another element out of the way. The pushed element fell towards the employee, striking him in the right femur. He sustained a right femur fracture.",1
An employee suffered severe cramping and heat exhaustion while performing work in 80-degree weather. He was hospitalized overnight.,1
An employee's right middle finger got smashed and trapped between a Roura Hopper material handling device and the forks on a forklift.,0
An employee dismounted the back of a slow-moving garbage truck in a residential area to get up into the cab. The employee slipped and fell under the rear tandems and was caught between the wheels and the asphalt. The employee was dragged for an unknown distance.,1
"An employee operating a reach truck was injured on April 9, 2015, when his foot got caught between the reach truck and another piece of equipment.",1
A worker fell off a lawn mower and broke his ankle.,1
"On April 9, 2015, at approximately 2:45 p.m., an employee suffered an amputation of the left ring finger as he performed maintenance on the new Midwest grinder dust collection system. While installing a belt on the drive pulley, his finger got pinched between the pulley and drive belt, amputating his finger pad.",0
An employee in the Kimberly Clark Plant in New Milford was working near some machinery that creates a lot of heat.  The employee reported feeling ill and fainted.  The employee went to the emergency room and was admitted to the hospital.,1
"An employee was adjusting a belt on a power washer. While checking the tension, the pump turned back on. This kicked the wrench away from the employee's hand and pulled his hand into the machine. His right pinky fingertip was amputated, and his right thumb was cut.",0
"An employee was helping another employee close the vault door. The injured employee's finger got caught in the door, resulting in a right index fingertip amputation.",0
"An employee was lowering a large hook onto a halo shackle used to move large manufactured parts. The employee was guiding the hook down with the left hand. As the hook reached the edge of the halo cable tray, the force of the hook landing on the cable tray caused an amputation of the left ring finger to the distal joint (below the nail bed).",1
An employee was operating a powered industrial vehicle (PIV) and got her leg caught between the PIV and the wall resulting in a broken leg and ankle.  The employee was hospitalized.,1
An employee suffered a broken leg when the strap being used to move a bundle of steel broke and fell on the employee. The employee was hospitalized and underwent surgery to repair the break.,1
An employee's shirt got caught in a floor mixer. The employee's right arm was injured.,1
A worker was stringing up the masonry wire machine. He pressed the single cycle button and when the machine cycled forward it caught his glove and pulled his hand through the pulling knurls amputating one half of his right middle finger.,1
While performing pre-gutting operations an employee cut his left knee requiring surgery and an overnight hospital stay.,1
"On March 25, 2015, an employee received a dog bite to the lower right leg.  On April 9, 2015, the employee was hospitalized by her primary care physician due to an infection that occurred from the dog bite.",1
"On or about April 9, 2015, at approximately 1300 hrs. an employee suffered the amputation of the distal phalanges on the right hand pinkie finger. The employee was attempting to load a bundle of angle iron onto a vehicle when the load shifted in his hands and pinned his right hand to the structure of the vehicle.",0
Employee received an amputation of left middle finger while working on a quick change attachment for a bucket loader.  ,0
An employee was stung by a bee and hospitalized following an allergic reaction.  ,1
"On or about 11am, on 4/9/2015, a pipe fitter was working off an 8 ft. A-frame ladder about 5 feet off the ground, trying to loosen a valve on the nitric acid line. The valve broke loose spraying liquid onto the employee. As the employee attempted to block the spray, he lost his balance and fell off the ladder, cracking an L3 vertebrae. He was hospitalized.",1
An employee was spray painting a ceiling while working from a platform on a mobile scaffold. The employee fell 9 feet from the scaffold  to the floor.,1
"An employee in the field, near Forest Service Road 15-700, was climbing over logs and got his foot caught. He was hospitalized with a broken tibia and fibula.",1
The employee crushed his right hand while attaching the outrigger pad during the assembly of a crane.,1
The employee was disassembling shelving units. The employee climbed-up on a shelf to grab something and slipped and fell.,1
Employee injured the left hip after falling to the concrete floor while moving a pane of glass.,1
"An employee standing at the end side of the MC700 press placed his right hand into the pinch point. The press started moving and gripped his hand, injuring three fingers.",1
"An employee installing siding fell from a ladder breaking his left leg below the knee. The ladder was on the deck and slipped due to misty, wet weather conditions.",1
An employee fell off of a ladder while waterproofing wall between the 25th and 26th floor of the Drexel building. The employee was hospitalized for a fractured small bone in the back.,1
Employee suffered a skull fracture after slipping and falling on a wet floor which had recently been mopped.  ,1
"Two employees were preparing two industrial control panels for shipment. The control panel is 5 feet wide, 7 feet tall, 1 foot deep, and weighs approximately 500lbs. They were setting one on the shipping pallet when the second one fell on top of the worker striking him on the back and injuring his right shoulder, ribs, and lung.",1
"An employee was operating a table saw, cutting cardboard tubes used to reinforce pools, when he suffered a right-hand thumb amputation. His thumb was severed across the nail bed.",1
An employee was opening the back of a trailer during product unloading when boxes from a pallet that shifted during transport fell on him. The employee sustained a fractured femur and a laceration to the head. The employee was subsequently hospitalized.,1
An employee got a hand caught in an auger while filling a bag with ice.,1
A Ski Patrol worker was found in the middle of the Rainbow Run trail with no signs of a collision with any customers or objects aside from the ski run.  The worker suffered a fractured C1 vertebrae and was hospitalized.,1
An employee was attempting to climb out of the bottom of a lift station when he fell more than ten feet from a fixed ladder landing on his arm at the bottom of the station. The employee was hospitalized.,1
"The injured employee had been performing landscaping services at a cemetery the day of the injury (6:00am - 3:3pm).  Throughout the day, he was complaining of leg cramps.  After returning to the yard, the employee was leaving (walking) the yard and collapsed.  A passer by came to his attention and the employee asked for them to call 911.  Emergency medical services responded and brought the employee to the hospital.",1
An employee lacerated the back of his hand while cutting a board with a power saw.,1
An employee was using his hand to push wood material when a saw pressure beam came down and amputated his left hand.,0
"An employee fell off of a ramp during an evacuation drill, sustaining a left hip fracture and shoulder injury.",1
"On April 10, 2015, at approximately 8:30 a.m., an employee tripped over a shop vac extension cord and fell on her right knee, resulting in a fracture and hospitalization.",1
"On or about April 20, 2015, an employee was dismantling an H.B. Robinson vertical motor in the decontamination room while suspended from an overhead crane. The motor slipped, resulting in an amputation.",1
An employee was mowing a green and caught his hand in the spinning blade when he went to empty the basket while the mower was still powered.,1
"On or about April 10, 2015, at approximately 1300 hours, an employee was hospitalized with two fractures to his distal tibia and fibula. He was assigned to a four-man team to repair a compressor located at an Oxy-Permian gas facility when he used a golf cart to retrieve equipment at another compressor. He hit a barrier with the golf cart, pinning his leg between the cart and the barrier. He was injured and subsequently hospitalized.",1
An employee working in the press department suffered a partial amputation when positioning a press machine part on the roller table.,0
An employee was attempting to hang a 365' drop from the house to the connector wire. He placed his ladder on the strand and proceeded to climb it. The ladder began to slide sideways; the employee started climbing down but was thrown off the ladder at an elevation of approximately 10 feet. The employee landed in a ditch and suffered a compound fracture of the leg.  The ladder was at an approximately 40-degree angle when the employee was thrown from it.,1
An employee removed a worn out sprocket from a Brehm Tube loader machine. The sprocket was repaired and placed back into the machine. The machine was energized and failed to automatically  feed. The employee opened the machine while the machine was energized to try to engage the machine by pushing a chain with his left index finger. His finger was caught in the machine resulting in an amputation.,0
"An employee was clearing a jam on the powder auger without any tools. Another employee restarted the machine, and the injured employee suffered an amputation on his right middle fingertip.",0
An employee's foot got crushed between the floor and boom of a drill rig. He broke his big toe.,1
An employee was tending the tug lines when one snapped and struck him in the face.,1
"An employee was injured while pressure testing an aluminum heat exchanger. The heat exchanger failed and struck the employee, resulting in multiple injuries.",1
An employee from Packard Sanitation Services was cleaning a casing machine when her glove got caught between the rolls. She lost the middle fingertip on her left hand.,0
"An employee was standing on a chair to change the sign in the window area. She fell, sustaining a facial laceration and tearing something in her right knee.",1
"On April 10, 2015, an employee was bitten by a spider on the right ankle while standing under a tree and patrolling the parking lot.",1
An employee was sawing wood when his hand was pulled into the guarded saw blade amputating his left pointer finger at the middle knuckle.,0
An employee's finger and thumb were fractured when he put his hand into the paper face bead machine.,1
An employee was attempting to free a dock door when the object that was holding the door came loose; the door hit him and broke his ankle.,1
"An employee was connecting steel beams when one of them came out, causing the employee to fall 15 feet. The employee sustained a fractured hip and was hospitalized.",1
An employee was installing decking on a new construction building. He walked towards the edge of the deck without being tied off and fell approximately 30 feet through an opening.,1
An employee's arm was fractured after getting caught by a Gloucester bag machine's shuttle.,1
"An employee was installing roof shingles with a nail gun when he tripped over a lanyard and fell onto his hand. The nail gun in the opposite hand landed on his hand, and a nail entered his hand and struck his bone.",1
"On 4/10/15, an employee was walking up the steps to a public sidewalk. The employee tripped on a step and injured their knee, subsequently requiring surgery.",1
An employee's left leg was burned while cleaning a machine when 180-degree water discharged from a hose. He was hospitalized with a second degree burn to his lower leg and foot.,1
An employee's finger got stuck between two battery terminals in a forklift machine. The employee clipped a fingertip and was hospitalized.,0
An employee was operating a conveyor that moves wood products. The employee attempted to remove a board from the moving conveyor and struck his right fingers against the angle iron on the frame of the conveyor resulting in a fracture to the right index finger and an ablation to the right ring finger that required the tip to be medically amputated.  ,0
"An employee was waxing a moving, horizontal bandsaw blade. The blade caught his work gloves and pulled his hand onto the blade, causing serious injuries.",1
An employee went upstairs to take measurements of the attic area. He stepped back and fell off of the open floor to the tile beneath. He suffered a fractured vertebra and was bleeding from the head. He was hospitalized.,1
"An employee was attempting to clear a paper jam on a press machine when a coworker depressed the controls for the press rollers to go into reverse. As the rollers reversed, the employee's right thumb was pulled into the rollers, causing an amputation. The employee was hospitalized.",0
An employee's arm was injured when reaching behind a taper box machine while cleaning grease on the floor.,1
"An employee using hoisting equipment to move hydro-blasting equipment was struck in the head when the hoisting equipment broke free, resulting in a concussion and hospitalization.",1
"While working in the sawmill, an employee de-energized and locked out a cutter before attempting to perform maintenance. After performing lockout/tagout, the employee manually rotated the wheel according to normal procedure and caught her left pinky and ring fingers in the knife blade.",1
An employee amputated his thumb while sharpening a meat slicer. Guards were not in place at the time of the incident.,0
An employee was participating in an obstacle course at Fort Bliss when he went over an obstacle and felt an insect bite his right index finger.,1
"On April 11, 2015, at approximately 0930 hours, an employee was unjamming several bottles passing through a coating hood at the hot end of the man conveyor. As the employee pulled the hot bottles towards himself to unstick them, they hit the floor and shattered. The shattered glass made contact with the hem of his pants, causing a flare up that ignited his clothing. He was burned on approximately 80 percent of his body.",1
"A forklift rack fell on an employee operating a standup forklift, pinning the employee between the rack and the opposite side of the cab area. The employee's head, neck, and back were injured.",1
"An employee was performing cementing operations on a drilling rig. While using an air hoist to hoist a cement plug over a pipe, his thumb got caught between the ""wing"" of the plug and the plug itself. He sustained an amputation to the left-hand thumb up to the knuckle.",1
"On or about 11 April 2015, at approximately 0830 hours, a Brazos Rock Energy employee received burns on his wrist and face when flammable gasses that accumulated during a pipeline hot tap ignited. The employee was helping a welder weld the pipe sections together when two pin-sized holes on a section of pipe 10 feet from the operation leaked flammable gasses into the pipe and surrounding area. The gasses accumulated to a level sufficient enough to cause a flash fire, which burned the employee.",1
"An employee removed the cargo straps from a load on the trailer. The load shifted and fell on the employee's leg, breaking his ankle.",1
An employee was removing yarn from a machine roller when his finger got caught and partially amputated by yarn. The machine was turned off with the power button on the control station at the time.,0
An employee was sweeping the floor when his right pant leg got caught in the pulley shaft of the straight line conveyer in the dry fertilizer facility. The employee's right foot was amputated.,0
An employee heard a hissing sound from pressure while breaking pipe joints. He then jumped from the rig floor six feet above ground and broke his leg when he landed.,1
An employee was injured when the ATV he was riding turned over and landed on him.,1
"An employee was using a bevel saw to cut a panel when his right hand hit the saw's blade, resulting in the amputation of his right middle and ring fingers.",0
"On 4/12/2015, at 9:30 a.m., an employee was cleaning the used bin of the icing equipment. The equipment door would not open, so an engineer was called to troubleshoot the issue. The employee was performing a visual check and watching the chains to see which one moved so the engineer could work on the issue. The employee stuck his right hand into the airlock, which resulted in an amputation of three middle fingertips.",1
"On or about 12 April 2015, at approximately 1410 hours, an employee amputated the distal portion of his left-hand, index phalanges (no bone involved). He was installing a hydraulic cylinder on a drilling rig when the cylinder he was holding swung laterally, pinching  his distal phalanges between the cylinder and the drilling rig structure.",0
An employee's right leg was crushed after being struck by an excavator bucket and pinned between the bucket and a concrete retaining wall. The employee's right leg was amputated above the knee.,0
"An employee was driving a Segway on the hotel sidewalk and maneuvered out of guests' way. While attempting to correct course, the employee was thrown from the Segway and fractured his hip. He was hospitalized.",1
"An employee operating a forklift drove up a wet ramp backwards. The forklift started to slide, so the employee put his foot out to lessen the impact. His left foot was crushed between the forklift and a pillar.",1
"On 4/12/2015, at 4:00p.m., an employee was using the Bridgeport Mill to mill off the logo on a Dooley. His hand slipped and got caught on the tool, resulting in a laceration and fracture on his left hand and wrist.",1
An employee fell approximately 12 feet while disassembling bleacher risers.,1
An employee was cleaning and pushing a cart down an aisle when she sprained her knee. She was hospitalized.,1
An employee suffered an asthma attack and was hospitalized after she inhaled a patient's perfume.  ,1
An employee was transferring a patient and felt a pull and pressure.,1
An employee was walking and talking when she tripped over a new floor cleaning machine wheel that was in the office. She fell on her left hip and was hospitalized.,1
"An employee lost her footing and fell on the floor, injuring her hip.",1
Nine employees were exposed to high levels of carbon monoxide from a boiler in the hotel basement. The employees felt ill and experienced headaches. One of the employees was hospitalized.,1
"An employee was closing a door to a Pyxis medication holder when she jammed her finger, requiring hospitalization.",1
"On April 13, 2015, at approximately 1:30 p.m., an employee was shot in the left hand. Prior to the incident, a well tender found an issue at a well site. The well tender contacted a roustabout crew to repair and clean the area. The injured employee responded to the job to oversee the work, take pictures, and complete an incident report. After completing his work, he was driving away from the site and was stopped by a suspect dressed in camouflage, standing in the road. The suspect stood on the passenger side of the truck, played a recording that said ""stop drilling,"" and pointed a gun at the employee's head. The employee grabbed the gun and shoved it away from his head; the gun fired into his left hand.  The employee drove off and was hospitalized.",1
"An employee was helping a press break operator form a piece of sheet metal for a gutter downspout. The operator and the employee placed the sheet metal into the break press and aligned the markings that were on the sheet metal under the press bar for the proper bends.  After the sheet metal was aligned in the press, the operator activated it at the control panel. The employee's right hand was in the press, and his two middle fingers were amputated at the first joint.",0
"On April 13, 2015, at approximately 10:50 p.m., an employee attempted to open a bay door to a truck while operating a forklift. He smashed his left hand, severely lacerating his left ring finger and damaging his left pinky finger, which was barely hanging on. The pinky finger was initially reattached, but was eventually surgically amputated up to the second joint.",0
An employee fell from the roof at a four-story apartment complex while installing roof decking. The employee was wearing a harness at the time.,1
An employee fell approximately 6 feet from a scaffold. He knocked out some teeth and possibly broke his arm.,1
An employee slipped while running through a mopped area and hit their trachea on a vertical pole.  The employee required surgery.,1
"An employee was climbing a scaffold to check if the graphics applied to a box truck were peeling. The scaffold tipped over, and the employee fell about 7 to 8 feet.",1
"On or about April 13, 2015, an employee was detailing an airline belt loader. He activated the unit and stuck his hand on the underside of the belt, which was inclined. He sustained a partial amputation of his finger and thumb.",0
An employee's fingers were crushed while reaching into a hamburger patty machine.,1
An employee walking with a ladder fell to the ground and injured his torso.,1
"An employee was retrieving coins from a safe located behind the customer service counter. The safe door closed by itself, pinching and amputating the tip of the employee's left thumb.",0
An employee's right index fingertip was amputated in a rebar bender.,0
"An employee fell from a ladder while repairing a leaking waterline in the ceiling at a residence. He had just finished soldering pipe and was in the clean-up phase of the job when he fell and sustained injuries to the head, face, right wrist, and left thumb.",1
"Two employees were on top of a water tank doing sand blast work. The wind caught them on the tank and blew away a tarp. The tarp struck the injured employee, who landed 20 feet below.",1
"An employee had just finished nailing a fence panel using a nail gun. As he extended his arm down into a resting/hanging position with his finger still on the trigger, another employee walked behind him and was struck in the lower leg with the nail gun, which actuated and drove a nail into his leg. The injured employee was hospitalized overnight.",1
"The employee was doing a quality line check in the hot fill area. As she turned around, she tripped over the water hose, fell, and sustained a comminuted fracture to her left elbow.",1
"An employee was performing maintenance on a scissor lift at a customer's facility. The lift slid on gravel on an incline, causing the employee to lose control. The lift tipped over, and the employee sustained a broken femur and pelvis.",1
An employee was replacing a belt on a conveyor system with his hand inside the cover to pull the belt. Another employee pushed a button to jog the conveyor. Three of the injured employee's fingers were pulled into the in-running nip point. His little finger was surgically amputated.,0
A maintenance employee fell through a leaking skylight he was repairing. He fell approximately 12 feet to the concrete floor below and broke several ribs.,1
"On or about April 13, 2015, at 1:50 p.m., a maintenance employee entered a robot cell to determine why the robot stopped working. He either fell off of the work platform or was struck by the work platform or robot, sustaining a compound fracture to his right leg and significant soft tissue damage to his right shoulder. He was hospitalized.",1
"An employee was holding a hydraulic hose while pressurizing a high-torque wrench to remove large nuts from a pressure vessel. The hydraulic hose ruptured, puncturing the employee's left index finger.",1
An employee was burned by hot steam/water when he was removing a flange off an unused condensation line.,1
An employee sustained injuries to his legs when the motor block of a tractor blew apart as he started it up.,1
An employee was injured after being struck by a forklift that was backing up.,1
An employee experienced shortness of breath and shoulder pain at work and was hospitalized.,1
"On April 13, 2015, an employee suffered an amputation to his left thumb tip when he placed it in a roll form metal bender machine at 2010 North Western Avenue in Hartford, South Dakota.",0
"Two employees were removing service wire that had been de-energized (energy source to street lights in preparation for demolition work for a new ski lodge). The injured employee climbed a utility pole; when he cut the line, it changed the balance of the pole (strain on pole) and caused it to break off at ground level. The employee fell approximately 22 to 25 feet to the ground. He was hospitalized.",1
An employee exited a stairway and entered an aisle way where she was struck by a forklift.  The employee suffered a broken tibia and was hospitalized.,1
An employee was cutting a tree with a chainsaw when the tree snapped and threw the employee 50 feet down to the ground.,1
"On April 14, 2015, at approximately 3:30 p.m., an employee's left index finger was amputated while operating the frame straightening machine. The employee was lowering the machine with his left hand while holding a safety bar out of the way with his right hand.  The frame of the machine came down on his left hand, which was laying on/near the top of the foot pedal.",0
"An employee was performing preventive maintenance on the conveyor leading to the robot packer.  He removed the chain drive guard to lubricate the chain; the chain was running at the time.  While trying to replace the guard after finishing, he dropped a bolt near the sprocket. When he went to retrieve the bolt, the chain and sprocket caught the end of his right index finger, amputating the fingertip.",0
"An employee was helping to load cargo pallets onto an aircraft. The pallets were placed onto a K-loader, and the employee was preparing the cargo to be pushed onto the plane. He lost his balance and fell 8 feet from the work deck onto the asphalt tarmac. He was unconscious and bleeding from the nose, head, and mouth. He also broke his wrist. The employee was hospitalized.",1
"On April 14, 2015, an employee fell down some stairs in the detail shop and was hospitalized.",1
"On or about 14 April 2015, at approximately 1612 hours, a Troy Vines, Inc. employee was replacing the tire on a Redimix truck on Tradewind and Duval Street. He lowered the vehicle to reposition the jack and was caught between the road surface and the truck's structure. The compression caused a hip dislocation and a fracture in his hip area. He was hospitalized.",1
"An employee was pulling cut pieces from a Tsune saw with gloves on. The employee's glove got caught on the blade, pulling his finger into the vise and cutting the tip of his right middle finger off.",0
"A maintenance employee was on his hands and knees extending the legs of a wing segmenter. Another employee bumped her hand truck into a free standing metal table, which then fell and amputated the tip of the maintenance employee's right-hand pinky finger.",0
An employee was walking in the reception area when a dog jumped on her and pushed her down. She tripped and landed on her side.,1
An employee sustained broken ribs and a punctured lung after falling while loading a tractor trailer. The employee was hospitalized.,1
An employee was carrying a box of paper and suffered a hernia.,1
"An employee was operating a concrete paving saw. He lost control of the saw, and it hit and severely cut the back of his right leg.",1
"While climbing out of his truck and stepping on the ground, an employee lost his footing and rolled his ankle.",1
"An employee suffered systemic poisoning when he ingested anti-freeze while drinking from an improperly labeled, temporary-use container.",1
"An employee was sitting at a computer putting information into the install program. His foot became tangled in the computer cords under the table. When he got up and started to walk, he fell and broke his left ankle.",1
"An employee sustained a 4"" laceration to the palm of his right hand when an aluminum-compressed air pipe was pulled out of his hands after a portion of the air hose became entangled in the blades of a small log machine that was in operation.",1
"An employee working on an aerial, drop-wire telephone cable fell 14 feet from a ladder. The employee injured their right ankle and hips.",1
An employee was moving a PIV when their foot got caught between the PIV and a bollard. The employee injured the foot and ankle.,1
An employee walking with a ladder twisted her ankle to the point that it broke. She was hospitalized and required surgery.,1
"An employee's finger was smashed when CANT, a cut log that can not be further processed in the saw mill operation, fell out of his hand. The employee lifted the log and lost his grip, and the log started to fall. While trying to change his grip to catch the log, his fingers got pinched between the log and the machine guard.",0
"On April 14, 2015, an employee rolled and broke an ankle on uneven grounds.",1
Employee got his left arm caught in moving equipment and went to the hospital. ,1
"An employee was cleaning carpet using a hot water extractor that contained Pro's Choice Power Gel, a concentrated blend of cleaning agents designed to safely remove spots and stains. After cleaning, the employee experienced fevers and an elevated heart rate. The employee was hospitalized.",1
"An employee attempted to unjam a paper shredder in the pharmacy department. Her left middle finger was pulled in, causing a partial amputation. She was hospitalized and required skin graft surgeries.",0
An employee and coworkers were pulling fiber optic cables through a horizontal duct beneath the road. The employee passed out and was hospitalized overnight.,1
An employee standing next to a forklift truck received a glancing blow to the right foot when the  operator started the forklift and turned to the right.,1
An employee was hospitalized after a dock plate fell and cut off three fingers on the employee's left hand.,1
"A lift cable on a truck crane was being replaced with a new cable.  The new cable was attached to the truck crane drum and a truck. The truck was used to stretch and place tension on the cable so it could be rolled onto the truck crane cable drum. An employee was holding a second cable on the crane to keep it from tangling with the new cable.  As the cable was being stretched by the truck, the cable rose upward and contacted an overhead power line. The employee received electrical burns and was hospitalized.",1
"On April 14, 2015, a bundle of steel landed on an employee's foot. Due to the injuries, four toes and a partial big toe were amputated.",0
"An employee was removing a loin wing from the strip using a vertical band saw. A piece dangled from the loin. The employee tried to grab it, and a finger came in contact with the saw blade. The employee sustained an amputation of the fingertip below the fingernail.",0
An employee was lifting a garbage can and dumping it into the garbage compactor when the employee suddenly felt pain in the lower back.,1
"An employee operating a tractor was travelling down a steep slope into a water basin when the tractor sped up and travelled down at a high rate of speed. When he reached the bottom, the tractor bounced and jarred him, causing a back injury that required hospitalization.",1
An employee broke his arm after reaching under a guard on the pail printing machine.,1
"An employee was performing steel erection connector activities when the installed bolts and/or nuts on the end of the steel I-beam failed, causing the employee to fall approximately 30 feet.",1
"A forklift operator moved forward and pinned the injured employee's ankle between the pallet being carried on the forks and a wall. The employee's ankle broke in two places, requiring surgery and hospitalization.",1
An employee descending a ladder fell and broke their pelvis while surveying an area that would need to have an electrical conduit installed.,1
"One mile south of Black Creek Reservoir,  a smoke jumper was participating in his annual certification jump when he had a hard landing, breaking his right arm and dislocating his right shoulder.",1
An employee was filling a power washer with gasoline when combustion occurred. The employee was hospitalized for flash burns to his face.,1
"On 4/15/2015, at 11:15 a.m., an employee working on a pad mount transformer came in contact with the 7200V underground cable live wire. The employee sustained a first degree burn on the left hand.",1
"An employee was walking from the back area when she slipped and fell, fracturing her left hip and wrist.",1
An employee's middle fingertip was amputated while he was lifting and moving two pieces of metal.,0
"On April 15, 2015, a maintenance technician cut all his fingers while using a table saw.  The cuts were stitched at the hospital that day.  On April 23, 2015, two fingers were amputated as a result of infection.",0
"On April 15, 2015, an employee tripped over a trash can and fell to the floor breaking the left shoulder resulting in hospitalization.",1
"An employee was trying to install a new roll of banding metal to the banding roll. A crane operator was lifting the roll on to the machine. When the employee tried to remove the nylon lifting sling, it became stuck. The crane operator tried to remove the stuck sling with the crane. When the operator pulled up on the sling, it pulled the roll of banding off the spool. The banding fell approximately 16 inches onto the employee's foot.",1
"On 4/15/15, at approximately 7:30 a.m., an employee was filling two 1,000-gallon nurse tanks with anhydrous ammonia when he suffered a chemical burn to his inner right arm, requiring hospitalization.",1
"On April 15, 2015, an employee punctured the middle finger of his left hand while repairing a communications cable that had been damaged while cutting tree roots. His finger swelled and the employee was admitted to hospital.",1
An employee was hospitalized with injuries after falling from a scaffold.,1
"An employee was jogging a conveyor belt to adjust the belt's tracking. The wrench he was using slipped and got caught between the roller and the side of the conveyor, pinning his hand and amputating his right-hand pinky finger at the second knuckle.",0
An employee was attempting to help a PIV operator move a crate when his finger got caught between the crate and the PIV forks.,0
"On 4/14/15, an employee suffered pain in his calf after completing the yearly ""pack test"" (walking 1.5 miles with a weighted pack) for physical fitness. He was hospitalized and required surgery for compartment syndrome.",1
An employee injured his right ankle following a four foot fall from a straight ladder.,1
"While disassembling a piece of machinery for repair, a piece of the machinery came loose and severed the tip of the employee's left thumb. The employee was hospitalized.",1
An employee was sanitizing meat processing equipment. The employee turned the machine on and inserted a hose up the discharge chute to inject a chemical cleaning foam. The mixing head on the end of the machine caught and amputated the employee's finger.,0
"A roll was being lowered into the furnace. The bottom edge of the roll caught the inside of the donut ring, causing the roll to turn out of the rigging shoe. An employee reached for the roll to clean off a refractory that had fallen down, unaware that the roll was out of the rigging. The roll fell through the donut and crushed the employee's hand. The employee suffered an amputation to the first knuckle of the right index finger; the right-hand middle finger was also fractured.",1
An employee was injured after abandoning a moving vehicle during transport for repair. The car had failed brakes and no brake fluid at the time. The employee landed on concrete and was hospitalized.,1
An employee was unloading a rail car alone and was found on the ground with a laceration under the left eye. The employee did not remember what happened and there were no witnesses.  A 50-pound tool was found near the injured employee.,1
"On or about April 15, 2015, at 3:30 p.m., an employee climbed up on a 4-foot railing to cut the banding off of a bundle of lumber when he slipped and fell on his back.  He sustained five broken ribs and five cracked vertebrae.",1
An employee was struck in the abdomen by a tree branch while trimming a tree.,1
An all terrain forklift ran over and broke an employee's leg.,1
An employee fell while walking to the office from her car and sustained arm injuries that resulted in hospitalization.,1
"An employee fell 8 to 9 feet from a second floor while sweeping debris. The employee leaned against the guardrail to look down; the guardrails failed, causing him to fall.",1
An employee reached into a mixing bowl attached to a dough mixer and broke two fingers.,1
"On April 15, 2015, an employee was loading a tank with anhydrous ammonia. He stumbled, which caused the valve to open slightly and release vapor that came in contact with the employee's face.  He immediately washed his face and rinsed his mouth and was later hospitalized.",1
An employee was using a Hobart meat slicer to cut cucumbers when her hand slipped and crossed over part of the blade. She suffered a partial finger amputation; no bone was removed.,0
"On or about April 15, 2015, an employee was injured and hospitalized when a mini-bulk container fell off of the forks of a forklift and struck him.",1
"An employee was lifting a power assembly out of a locomotive when the assembly slipped. He reached for it, and his left hand got caught between the assembly and the locomotive engine. The top of his left pinky finger was amputated.",0
An employee's cheek was struck-by a broken grinding wheel while he was using the grinder to clean materials.,1
A worker was cutting flat meats with a band saw and amputated the tips of his left middle and index fingers.,0
An employee was struck in the temple by a hydraulic hose fracturing the eye socket and skull.,1
An employee was cleaning steel beams. The beams rolled and fell on his ankle causing fractures.,1
An employee suffered a compound fracture of the back from a fall while walking to the corporate office on Main Street.,1
An employee amputated four fingers in a meat grinder.  The grinder was guarded at the time of the incident.,0
An employee was injured after stepping out of a jobsite trailer that had no stairs. The employee was admitted to the hospital with a fractured right leg.,1
"An employee was leaving a workstation, slipped on a piece of chicken on the floor and fell fracturing the leg and requiring hospital admission.",1
An employee went under an F-350 truck to repair a locked transmission with the engine turned off. He disconnected the transmission cable and the vehicle moved in reverse naturally due to a slope in the terrain. The left front wheel ran over the employee from the shoulder to the abdomen.,1
"While positioning a Linkbelt 98 track logging yarder, an employee got his left foot caught under the left front track causing crushing injuries to his toes and foot. He was hospitalized.",1
An employee was hospitalized following a head injury sustained from a fall from a two foot high platform to the concrete floor below.,1
"On 4/16/2015 at about 10:30 a.m., an employee was oiling, cleaning, and checking tension on a moving chain when the employee's finger got caught up in the chain amputating a fingertip.",0
An employee was changing a jack-hammer in an air compressor unit and amputated his left ring finger.,1
An employee was adjusting a loose belt on a conveyor when his left hand fingertip was amputated.,0
An employee fell three stories down an elevator shaft at a construction project.,1
An employee was helping to guide a skiff pan onto its side to be painted when the load shifted and the strap came off of the forks of the forklift. The corner of the pan landed on his right foot. The resulting foot fracture required hospitalization and surgery to repair.,1
An employee reached into a trim press to clear a jam and suffered a fracture to left forearm. The employee was hospitalized and underwent surgery to repair the fracture.,1
"An electrical maintenance technician was trouble shooting an electrical fault on a horizontal machine center (HMC).  The maintenance tech turned the HMC off; however, he did not lockout the HMC.  The maintenance tech went to the back of the HMC and removed a panel to work on the machine and clear the electrical fault.  The maintenance tech cleared the fault.  The setup technician noticed that the fault was cleared from the HMC control panel; and the setup tech pushed the home button to bring the carriage to the starting position.  The maintenance tech was still working on the HMC at the back of machine.  When the setup tech pushed the home button the carriage moved back to the starting position and pinned the maintenance tech's right arm between the carriage and the HMC frame.  The maintenance tech's right arm was broken in two different locations below the elbow.",1
An employee performing a cable installation at the pole using a ladder was electrocuted and fell 20 feet to the ground. The employee was working alone at the time and was responsive when emergency response transported him to the hospital.,1
"An employee was assisting in installing access plates into a box cover.  The chain on the access plate slipped from the narrow portion of the keyhole to the wide portion of the keyhole which caused the plate to be released.  The employee had his finger below on the plate frame, and the plate fell onto the employee's thumb amputating it immediately below the nail bed.  The plate weighed approximately 1300 - 1400 lbs.",0
A utility line construction crew was in the process of replacing a wooden utility pole with a new metal utility pole and metal cross arm.  After the new metal pole and cross arm was installed the crew wrapped an insulated blanket around the pole above the cross arm.  Insulators were installed on the cross arm.  A crew member was in a lift bucket and was using metal quick ties to connect the power lines to the cross arm insulators.  The crew member tied one of the quick ties to an insulator and was preparing to tie one of the power lines to the insulator. The free end of the quick tie slipped out of the crew member's hand and curled underneath the insulated blanket contacting the power line.  The power line arced and burned the crew member's face.,1
"As an employee was moving a grill to be cleaned, the employee's finger was caught between the grill and the wall.",1
An employee suffered a crushing injury to his right leg when the excavator that he was walking behind stopped and backed up.,1
An employee was in a classroom working with toddlers when she slipped on a manipulative toy (used as a teaching aid) and hit her left knee on the floor. She was unable to stand-up and was hospitalized overnight.,1
"An employee was grinding meat without a plunger and his hand was pulled into the grinder resulting in the loss of the pointer, middle and ring fingers on the right hand.",1
An employee in the spiral freezer production department was taking the tunnel pan cover off the spiral chain when the cover came down and amputated the employee's left hand middle fingertip.,0
An employee standing adjacent to the process to affix a tag to a wood crate was struck with the stapler nail from another co-worker as they assembled the wood crate using a pneumatic stapler. The nail struck the left side of his chest under his arm.,1
"On April 16, 2015, at about 3 pm, an employee was standing on a step ladder placing boxes on a shelf. He fell to the floor and experienced a cut on the head, a fractured right wrist, back pain, and a concussion. He was admitted to the hospital.",1
"On 4/16/2015 at about 1:45 p.m., an employee was assembling a skid. When he went to step over the skid, he fell backwards and activated the nail gun shooting a nail into his upper leg.",1
"On or about 16 April 2015 at approximately 1530 hrs an employee was leveling a section of the construction site with a 2007 Ingersoll Rand SD77DX Vibratory Smooth Drum Roller, when the vehicle started to slide down the embankment. The employee dismounted the vehicle and injured his neck upon impact with the ground.",1
On or about 16 April 2015 at approximately 0830 hrs an employee suffered an amputation of the distal phalanges located on the thumb of the left hand. The employee was retrieving keys from a safe when the door was accidently closed pinning her thumb between the door and the frame of the safe.,0
An employee's thumb tip was amputated while slicing meat for a customer.,0
An employee was assisting a truck driver putting a tarp on a unit. The employee used a wooden pallet as a ladder to reach the tarp. The pallet slid out from underneath and the employee fell onto the truck fracturing his right lower leg.,1
"A mechanic was at machine 4L-2 in the rough machine center when a machinist asked to borrow the 10-ton overhead gantry crane.  As the machinist moved the crane, the hook struck the mechanic in the head.  Later, the employee had a headache and blurry vision.  He was taken to the hospital and admitted.",1
"An employee was trimming palm trees with a chain saw, fell approximately 20 feet off a ladder, and was struck in the face by the chain saw.",1
An employee was found on the ground outside the turnstile near the parking lot.  The employee needed staples in his head as a result of the fall.,1
An employee feeding a molder reached in to clear a jam and cut the right hand little finger.,0
"On Friday, April 17, 2015, at approximately 3:45 PM, a machinist was operating a lathe and grinding attachment to smooth a rubber roller. The employee was checking the roller thickness when his left thumb was pulled into the grinder. The employee sustained an amputation of the fingertip of his left thumb.",0
An employee was starting up a production line and putting film into two nip rollers. The film caught and pulled a finger into the nip rollers resulting in an amputation injury.,0
"An employee was operating a zero turn lawn mower and became stuck.  When trying to free the mower, the employee lost his footing and fell backwards striking his head on some rocks.  The employee was dazed, but continued to work. The next morning he was found in bed partially paralyzed and could not communicate.",1
An employee walking from the memory support building to the assisted living building for a meeting tripped and fell injuring the right hip.,1
"An employee was climbing down a ladder from a large forklift and slipped and fell, breaking his leg.",1
"A battery repair employee removed battery cells from a tray of an industrial battery using a hoist and a below-the-hook lifting device, which consisted of a lug that fit onto the hook of the hoist and a metal angle that fit through connectors on the tops of the battery cells. With the right hand, the employee held the below-the-hook lifting device to keep this device from slipping out of the connector and operated the hoist pendant with the left hand. While holding the below-the-hook lifting device, the employee also inserted a finger of the right hand through the handle in the side of the tray. When the employee activated the ""up"" control on the hoist, the battery cells, each weighing over 100 pounds, moved upward out of the tray, shearing the top of the employee's right middle finger as the cells passed by the handle of the tray.",0
An employee closed the elevator door on his left index finger which amputated the tip.,1
"An employee stepping out of a scissor lift fell backwards and hit his head. He was hospitalized overnight with injuries to his head and neck, elbow, and ankle.",1
An employee fell approximately 10 feet and broke his right wrist and left forearm. The employee was hospitalized.,1
"An employee was attempting to repair a hole in the roof of his commercial trailer (van). In order to do so, he leaned a ladder against the wall inside his trailer. The ladder slid and he fell off the ladder fracturing his right arm and bruising his left knee.  He also lost one tooth and required stitches on his lips.",1
"Two employees were unloading beer from the back of an 18 wheeler. One employee was pulling down the lift gate and the other employee was assisting with his hands flat on the lift gate. The employee with his hands flat on the gate caught his middle finger, on his left hand, in a pinch point. The employee received a partial amputation of the tip of his middle finger, which was later fully amputated at the hospital that night.",0
An employee was taking a glass door off of a stove when the door shattered.  The employee was wearing safety glasses; however the employee brushed his face with his hand and glass entered his eye.,1
"On April 17, 2015, at approximately 7:00 PM, an employee smashed his hand while changing the knock out machine hammers, which resulted in the amputation of his left middle finger.",0
An employee was injured when struck-by plastic pipes while unloading.  The worker was hospitalized.,1
An employee amputated part of his left thumb while using a masonry table saw to cut 4'x8' brick. The saw was guarded at the time of the incident.,0
A delivery driver from Haviland Drainage was injured by plastic pipes that rolled off of the Haviland delivery truck.  The worker was hospitalized.,1
An employee was participating in an obstacle course as part of a fundraising event and tripped over a 5 foot wall injuring the left knee.,1
"On April 17, 2015, a forklift operator fell off his forklift and the forklift ran over his arm. No bones were broken, but the employee sustained torn ligaments that required surgery.",1
An employee was receiving trimmed PVC membrane pieces from a calendar when his finger came in contact with the blade amputating a fingertip. He was wearing cut-resistant gloves at the time of the incident.,0
"On or about April 17, 2015, an employee sustained a avulsion of the tip of the right first finger that later resulted in an amputation.",0
An employee was removing concrete forms and loading them onto a flatbed tractor trailer when his left index finger got caught in the chain rigging that was in use to move the forms.  The load shifted and amputated his left index finger between the bottom of the finger nail and the top of the knuckle.,1
"A sanitation worker was working at a sink in the production area near the kettles.  A kettle operator was using a forklift to raise drums of hot sauce. A drum was knocked from the pallet, struck a cart, and hit the ground.  A plastic bag within the drum broke open when the drum hit the floor, and the hot sauce contained within the plastic bag hit the back of the sanitation employee.  The employee received first and second degree burns on the head, front, arm and leg. Additionally, an area on the foot received a third degree burn.",1
An employee operating a pallet jack got his left ankle pinned between the pallet jack and a pallet in storage. ,1
An employee going down the stairs tripped and fell forward and hit a knee on the stairs.,1
An employee was pulling a dock plate to unload cargo and the dock plate caused a severe laceration of the right hand middle finger.,1
An employee was injured when a rack of tables being pushed down a lift gate began to travel too quickly. The tables fell off the lift gate and onto the employee.,1
"On April 17, 2015, an employee in the laundry room stepped behind laundry equipment and was injured when caught between the machine and the wall.",1
An employee fell from the 3rd or 4th rung of a 24 ft. extension ladder that was extended 12 ft.  The employee hit his head and broke ten ribs and was admitted to the hospital for treatment.,1
A foreman and the employee were in the electric room pulling a cover to test the breaker.  The employee reached in to take the shield off and was shocked.,1
An employee walking down a plywood ramp that was slick from the rain slipped and fell breaking his leg.,1
An employee caught his hand in a pinch point between the sub frame assembly and jix figure while picking up and moving a tri-axle frame assembly.,0
"An employee was installing batten bars onto the sheeting panel during the installation of an aluminum dump. His safety harness rope got caught in the aluminum panel and while he was trying to free it, he fell roughly 20 feet to the ground.",1
An employee received a head injury when a pressurized line came apart.,1
An employee was using a crane and a C hook to load a roll of coiled steel into a rack. The roll got caught on the rack and fell onto the employee's right leg resulting in hospitalization and amputation of his right leg.,1
An employee was processing parts and amputated the tip of the index and middle fingers on his right hand while trying to loosen a part.,0
An employee amputated the tip of the right index finger when his hand got caught in the roller machine.,0
An employee suffered a partial amputation of the left middle finger when a wedge was being inserted between two flanges using a chain fall to secure an opening on a gas line gasket and the top flange slammed down onto the employee's finger after the chain fall gave way.,0
"An employee and a couple of other guys were removing a 12 inch section of cargo pipe and a 12 inch valve with a crane.  When they lifted the section of pipe, the section swung and the valve hit an employee.  He fell to the deck (on the same level) and was injured.",1
"An employee turned and caught his foot against a bollard post that was there to protect the equipment.  He lost his balance, fell, and broke his hip.  He was hospitalized.",1
"On 4/18/15 an employee was changing doctor blades on tissue machine 2. As the blades were positioned, the employee suffered an amputation injury when his left right finger was caught between a cylinder and the clevis.",0
An employee sitting on a forklift leaned forward to scan the barcode on the load. The employee's arm went through the mast and as he leaned over his leg pushed the lever upward causing the mast to come together and pinching his right forearm. The employee was kept overnight at the hospital.,1
Employees were moving a heat exchanger tube bundle with a hydraulic crane.  The crane had set the tube bundle down on a crawler and the employee had disconnected the synthetic sling from the bundle and used hand signals to the crane operator to rise the main line.  The sling caught the tube bundle and rolled off onto the employee.,1
An employee was using a hot water hose to clean the cook room. He stepped backwards into an open drain trough and the hot water in the drain burned the front of his lower left leg and the top of his left foot. The drain was not covered at the time of the incident.,1
An employee was elevated between 5-7 ft. in a 4' w x 5' l x 3' tall wire basket attached to the forks of a sit-down rider forklift. The forklift operator began lowering the basket. The basket tilted and the employee fell out. The employee sustained a broken elbow and arm and a cracked pelvis.  No fall protection was used.,1
"An employee was servicing a Gamco concrete paving machine due to a small hydraulic leak.  While servicing the head pulley belt, the employee sustained a puncture wound that released hydraulic fluid into his hand. The puncture wound was cleaned at hospital; however, the employee was hospitalized overnight to ensure there was no remaining hydraulic fluid in his hand.",1
An employee working at a pump station was hospitalized after being found unconscious on a metal staircase. He was treated for a concussion and shoulder and hip contusions.,1
"An employee sustained a fingertip amputation to the right index finger which included bone loss while operating a swaging machine on April 18, 2015.",0
The employee was utilizing a knife to cut a plastic roll and amputated the tip of his left thumb.,1
The crew was installing a transformer when an arc flash occurred.,1
"An employee who was standing on a wooden crane mat was in the process of placing another wooden crane mat when the crane broke the minimal approach distance (MAD) to an energized ""live"" line and created an arc flash.",1
"An employee was on a catwalk in the boiler room washing out two 2,000 gallon mixing tanks that previously contained diethanolamine (DEA) with water. The water was draining into a 275 gallon poly tote. The tote exploded creating a fire. The employee received burns to the top of his hand and injured his ankle.",1
"An employee was hospitalized when his truck rolled over while hauling produce water to a disposal site due to soft road conditions on 60th Street NW, Williston, ND.",1
A load of steel pipes was being lowered into a barge.  The employee attempted to direct the load of steel pipes and his right arm and hand were pinned between the barge and the steel pipes.  He sustained multiple fractures.,1
An employee was playing in the outside yard with a group of children.  The employee slipped in the grass and tore a tendon in her right knee.  The employee was hospitalized for surgery on the knee.,1
"An employee was walking from segregation to medical, when she tripped and fell in the back hallway. There was wet wax on the floor at the time of the incident.",1
An employee was leaning against an order picker when it moved and the employee fell and broke his hip.,1
"On April 20, 2015, at about 1400 hrs, an employee walking on a concrete floor while conducting an inspection of work in progress, stepped on a covered hole that gave way, and fell 10 feet to the concrete surface below. The employee sustained two broken hips, a broken knee and two broken ribs.",1
"On April 20, 2015, an employee was loading a powered wheel chair weighing approximately 400 lbs into the cargo bay of a 757 aircraft and got his left pinky finger caught between the wheel and the frame of the wheel chair resulting in the amputation of the pinky fingertip.",0
An employee was working from a scissor lift performing connecting work when the steel beam that was supported by a crane struck the scissor lift knocking it over.  The employee jumped or fell approximately 12 to 14 feet to the ground and then the scissor lift fell on top of him.  The employee suffered two broken ankles and was hospitalized.,1
"On April 20, 2015, an employee was hospitalized as a result of being struck by a forklift.",1
A truck driver was preparing to load material in a truck. A steel bar fell from the bottom storage rack and caught his finger between the steel bar and the ground.  The employees left middle finger was amputated.,0
An employee was cleaning the paddles on a bone canon when his frock was caught in the machine. The employee tried to free himself from the machine and in the process his hand was caught in the machine. His left pinky finger was amputated as a result. ,1
An employee crushed the right index finger and removed the tip while utilizing a pedestal welder to weld bolts onto car parts.,0
"An employee working in a corrugated box manufacturing facility was operating a tube saw that became jammed with material. He lifted the guarding system to unclog the machine. He re-loaded the machine with tubes while the guards were in the lifted position. As he began to feed the newly inserted tubes, his gloved right hand was lacerated. He was taken to the hospital.",1
An employee fell and broke a hip as he was leaving the trailer for the day. Earlier in the day the stairway from the door was moved to another access door.,1
"A project superintendent was walking on a mezzanine made of a series of steel joists with sheets of plywood used for decking.  The employee fell through an unguarded area of the mezzanine, through the mezzanine floor and into an office below, where he hit his head on a desk.  The employee was transported to an area hospital where he was admitted.",1
An employee was bending a piece of rebar and the employee's hand was caught between the bar and the edge of the work table. The employee's pinky fingertip was amputated a week later.,0
An employee fell down the steps and broke his ankle. The employee was admitted into the hospital with a neck contusion and a broken ankle.,1
A field mechanic was working on a vehicle on the side of the road. He pulled a cylinder from the vehicle and it dropped onto his left hand. His left middle finger was amputated.,0
An employee was in the process of rolling a 22 inch diameter pipe with an instrument called a C-Bar (tool used to roll the pipe).  His finger got caught between the C-Bar and the next joint of pipe to be rolled which resulted in an amputation.,1
An employee was bitten by a dog on April 17th at 1100.  He was treated and released.  Follow up shots were prescribed.  On his 4th rabies shot he became ill and was hospitalized overnight.,1
A temporary employee working at the facility was scooping product out of a barrel placed on a plastic pallet and stepped off injuring her left hip. She was subsequently hospitalized for treatment.,1
"During a cast and mold cement job, an employee was trying to remove a tension cable.  The employee's glove got caught and while attempting to remove his hand, the employee's fingertip was injured.  The employee was hospitalized and the fingertip was medically amputated.",1
An employee passed out while performing ship fitting work and was admitted to the hospital.,1
On or about 20 April 2015 at approximately 1644 hrs an employee was hospitalized after a blunt force injury to the cranium. The employee was working on the gut table when he stepped on a bladder bag causing the employee to lose his balance and fall off of the table striking the posterior section of his cranium. The employee received a laceration to the posterior cranium and was admitted to the hospital.,1
"On or about 20 April 2015, an employee suffered the amputation of the distal phalanx of her great toe left foot and the complete removal of all three phalanx of the third toe left foot. On or about 30 March 2015, the employee was moving a metal 55 gallon container of fluid from a dolly to a platform raised 12 inches above the surface, when the drum slid off of the platform and fell onto the employee's foot. The employee was driven to the hospital where she was treated and released. On the 15th of April 2015, the great toe and third toe of the left foot were found to contain necrotic tissues and were slated for removal which was conducted on 20 April 2015.",0
"On or about 20 April 2015 at approximately 1345 hrs, an employee suffered a fractured skull and surgical removal of  bone from the cranial vault. The employee was riding on the open tailgate of a moving utility cargo vehicle when he fell off of the tail gate and impacted the asphalt with his cranium (Left side frontal temporal region).",1
"On or about 20 April 2015 at approximately 1000 hrs an employee of Holman Well Service was hospitalized with an injured hand. The employee was assisting in the replacement of a BOP for Apache Bevins East 99-1H well head. The BOP was placed on the ground next to the well head. As the employees were working around the BOP, it fell over pinning the employee's right hand between the BOP body and the structure of the well head. The employee sustained multiple hand fractures.",1
"A driver was preparing an empty dump trailer to be loaded. He unsecured the rear gate, then unfastened the tarp connections.  As he walked back to the rear of the trailer, the wind caught the gate, swinging it open and striking the driver on his left side, driving him into the side of the trailer on his right side.",1
"An employee leaving work at the end of a shift, was walking down a set of interior stairs, tripped and fell breaking the lower left leg.",1
An employee was exposed to hydraulic fluid while servicing a hydraulic line.,1
An employee installing a satellite dish suffered a broken leg when the portable trailer stairs he was working from tipped over as he disconnected his testing equipment.,1
An employee was coming back from lunch when she was struck by an SUV.  The employee was in the crosswalk of the parking lot near the grocery entrance.  The employee was admitted to the hospital for treatment of a fractured foot/ankle.,1
The employee stepped on a table to reach a tool that was on top of a piece of equipment. The table collapsed and the employee fell approximately three feet onto his left foot breaking a bone in his heel.,1
"An employee working on the Dapec 3 Line received fractures to the right hand, forearm, and elbow after coming in contact with a rotating shaft.",1
"An employee was operating a panel saw when a piece of laminate became jammed. The employee attempted to clear the jam and accidentally depressed the ""on"" switch. The employee's finger was partially amputated and then was removed at the hospital.",0
"An employee was installing electrical cables near the ceiling at a manufacturing facility. The employee was operating a scissor lift at a height of approximately 26 feet. While pulling the cable, a portion of the cable end became entangled on the lift and the lift overturned. The employee suffered left leg injuries that required surgery.",1
An employee reached into a mechanical power press to remove a part that had been pressed when the press cycled amputating the middle fingertip on the employee's left hand.,1
An employee had his left thumb tip amputated while performing final assembly on an awning.  His left thumb was caught in the winding machine which wraps the awning cloth onto the metal bars that hold the awning.,0
An employee sustained a broken right leg when a cattle gate that was stacked upright fell on his leg as he attempted to maneuver it onto a pallet.,1
"A crew was removing a tree and had the tree cut down to 13 feet.  As they were removing the stump, the tree fell striking the employee's ankle.  The employee was transported to the hospital where he was admitted for surgery on his ankle.",1
An employee was carrying 10 pounds of cheese from a cart to the production line when she fell and broke her hip.,1
A worker experienced a partial finger amputation while removing dough from a machine.,1
Employer reported a possible amputation of the right pinky finger. An employee was moving a gate that had a stationary roller on top and a finger on the right hand got caught in the roller.,0
An employee injured a hand working on an electric drill. Surgery was required to repair the hand.,1
"A forklift was operating a tow motor, lifting a machine coolant tote to fill a machine with coolant.   The injured employee was operating the hose that is connected to the tote to fill the machine reservoir. The tote shifted on the forks of the forklift and fell on the hose operator breaking both of his legs.",1
"On 4/20/15 at 3:30pm,a maintenance employee on a 6' ladder fell striking his right side on a parking bollard. The employee sustained injuries including broken ribs and a slight pneumothorax on the right side. The employee was hospitalized.",1
"Worker was in the process of moving a roll off box onto a transport trailer when the lid came down and pinned his hand between the lid and the box.  The worker sustained a crushed hand and fingers, requiring medical attention and an overnight stay at the local hospital.",1
"A worker was descending a 20 foot extension ladder at an apartment complex construction site. At about 6 feet, he slipped and caught his leg in the ladder, breaking it in two places.",1
An employee suffered the amputation of the right hand middle fingertip while trying to clean dough off the laminator equipment (cookie die cutter) on line #10.,0
A worker was hospitalized after a cut on the finger became infected.,1
An employee amputated part of his left little finger when a fusion pipe fell on his hand at the jobsite.,0
"An employee noticed that there was a water leak on the Omasum washer/refiner. As he tightened a thumb screw, the door opened on a timer spraying the employee with 210 degree water on his left arm, chest and abdomen.",1
On 4-21-15 an employee was walking into the rear entrance of Medical Office Building B when the employee's shoe got caught on the pavement and the employee fell striking his/her face on the sidewalk. The employee was admitted to the hospital for a sub-arachnoid hemorrhage.,1
"An employee suffered a heat-related injury during a PT hike. The employee started to feel dizzy. He collapsed, but remained conscious. First aid was rendered at the scene and the employee was admitted to the hospital.",1
An employee was cutting the pancreas from the gut when the knife slipped and cut the left forearm.,1
"An employee was performing maintenance work at a customer's location. While carrying a large fan, the employee fell and the fan blade struck the employee's right hand and severed the pinky finger.",0
An employee was hospitalized for a cut on her left forearm while emptying the Horizontal Mixer.,1
"While moving a dumpster form underneath the garbage chute to empty it, the employee's left arm was caught between the dumpster and the wall, breaking it. The fracture required hospitalization and surgery to repair.",1
"An employee fell out of the back of a pickup while bagging in preparation for painting and fell onto another vehicle, fracturing the back.",1
An employee was hospitalized for a lumbosacral sprain/strain.,1
"A maintenance employee was troubleshooting a cab assembly.  He put his arm between a positive stop and the guide assembly.  The cab assembly was not locked out or blocked, and the assembly dropped, hitting his left forearm.  The arm was broken and the employee was transported to a local hospital and admitted.",1
An employee's left finger was amputated while removing bolts from a scrapper.,0
"An maintenance worker, inserted his left hand into the mower chute to remove grass while the mower blades were engaged and cut two of his fingers.  He was admitted to the hospital for surgery to reattach the fingers.",1
An employee fell three to four feet from the back of a truck after delivering food to an American airlines plane.,1
An employee working on the drilling floor was picking up the jerk chain for the tongs when the driller applied tension to the chain. The employee got the fingers of his left hand pinched between the headache post and the chain.,0
An employee fell off an A-frame ladder and broke his wrist.,1
An employee slipped and fell down the stairs injuring his leg.,1
An employee suffered a thumb amputation while performing demolition work when an excavator pinned the employee's thumb between a wall and a tooth of the excavator bucket.,1
"An employee was performing maintenance (cleaning) on the top and bottom roll coater machine at the end of his shift. During the cleaning process, the employee touched the roller and his left arm was pulled into the machine. The employee was transported to the hospital.",1
"On April 21, 2015, an employee operating a printing press sustained an injury to the right ring finger while attempting to clear a jam resulting in an amputation.",1
An employee slipped on icing and fell to the floor fracturing the left hip.,1
An employee was assisting a forklift driver with a drum and drum grabber. The drum slipped and the employee's finger was caught between the drum and the drum grabber. The employee's ring finger was amputated.,1
Employee ruptured intestinal cysts when he lifted a box of tile while working at the store.,1
An employee's right pinky fingertip was amputated when it was pulled into a machine.,0
An employee suffered a right hand amputation while performing a task on a Formax forming machine.,0
An employee was knocked to the ground when the cab of a mulcher fell on him.,1
An employee received a neck and back injury while lifting a patient.,1
An employee was assisting a mechanic in disassembling a gear box. The employee was holding an intermediate assembly inside the gear box when it shifted and created a pinch point between the assembly and the internal bore. The tip of one of the employee's index fingers was amputated.,0
An employee lost a fingertip on a drill collar.,0
"An employee and coworker attempting to open a rear truck door pushed on it while it was under pressure. As the injured employee looked away, the door swung open. The door handle struck and fractured his left jaw.",1
"An employee fell from a tractor and struck her head on the ground, resulting in a concussion. She was hospitalized overnight.",1
An Employee was working on the flat steak line running meats over the skinner when his left thumb was cut on the blade amputating the outside edge and end of the right thumb. A skinner is like a planner that removes the outer layer of the meat.,0
An employee was walking on a 40 inch high work platform and was stepping down to a lower elevation of the work platform when he slipped off the platform and struck his ribs on the left side. The employee suffered a pneumothorax and several fractured ribs and was hospitalized.,1
An employee received an electric shock while installing a dryer at a customer's home.,1
An Employee fell into a phosphoric acid tank sustaining burns and was hospitalized.,1
An employee was hospitalized after being struck by a vehicle that entered a work zone.,1
An employee's hand was crushed by a cocoa press. The employee was hospitalized.,1
An employee was struck by a forklift while working on the loading dock.  The employee was hospitalized for a right ankle fracture.,1
An employee was injured due to a fall from a 3-foot ladder.,1
"An employee sustained a left eye orbital fracture and stitches when a pipe split, releasing water from the pressurized pipe machine.",1
"An employee walking to clock out for lunch, tripped and fell breaking his/her arm.",1
"An employee opened the shaver machine door and reached in to remove a Ford F-7 part from the clamp device. The part had not finished coasting down at the time.  The employee contacted the rotating part, which pulled flesh off of his right index fingertip.",0
"An employee experienced light headedness, shortness of breath, and tingling in both arms.  The employee was transported to the ER by another employee after calling his doctor. The employee was working in a manhole the previous day.",1
An employee was struck by a vehicle while working in a roadside construction zone.,1
An employee was attempting to retrieve material from the second level by standing on a vertically placed pallet. The pallet shifted causing the employee to fall and break a hip.,1
An employee suffered an amputation when their left hand (fifth digit) got stuck in a belt behind one of the bowling machines.,0
"An employee suffered a serious leg injury from a power pole while moving a stack of power poles using a Gradall forklift at or near 83rd and 64th in Stanley, North Dakota.",1
"An employee drifted to the shoulder of the road. The employee tried to correct and oversteered, causing the loaded ready-mix truck to roll.",1
"On 4/22/15 at 1:00PM, an employee was moving a load of bent plate steel, 10 pieces @ 200 lbs each, on a material cart.  While pushing the cart over a transition in the floor (between two shops), the material shifted and caught his hand between cart and the material, crushing his left hand forefinger. The employee's finger was surgically amputated at the hospital.",1
"An employee was struck by a section of traffic guardrail. A backhoe was being used to remove the section. When it pulled on the guardrail, a portion of the guardrail flung and struck the employee in his legs.",1
An employee smashed the left pinky finger when closing a dumpster door. The employee was hospitalized and required surgery.,1
"An employee was exiting an excavator.  The employee's foot got caught on the exit ladder on the excavator, causing the employee to fall backwards onto the ground resulting in a broken right hip.",1
"On April 22, 2015, an employee was crossing over a grassy area between two facility parking lots on her way to work. As she went to step down to the parking lot, a heavy gust of wind from behind made her lose her balance. She fell down and broke her right leg at the femur.",1
"An employee was unhanging wood scraps from an edger when his left hand got caught in a belt and sprocket, amputating his left ring finger and causing other injuries to his left hand.",0
"An employee was hit by the blast of a sand blaster, which injected media into his leg.",1
An employee was mounting a tire when his finger was caught between the rim and the caliper.  The employee's right index fingertip was amputated.,0
"An employee was working approximately 10 feet inside of a box truck, preparing materials for shipping. He was tightening a ratchet strap to secure gas cylinders. His hand slipped off of the strap and he stumbled approximately 10 feet backwards. He fell out of the back of the truck, approximately 4 feet to the concrete parking lot, and broke his left femur and hip. He was hospitalized and required surgery.",1
The employee was tasked with cleaning insulators inside a transformer rectifier set.  The employee reached inside the cabinet with a rag that had a mixture of vinegar and water on it to clean the insulator.  An electrical arc struck the fingers of his left hand.  The voltage is 307 volts and the amperage is unknown.,1
"An employee was conducting leak testing on the roof and started to climb down the ladder.  When he was halfway down, a gust of wind caused him to fall. He was wearing a fall protection harness at the time.",1
An employee fell through an elevator shaft of a two-story home thinking that the door led to a closet. The employee suffered a slight fracture to his lower back.,1
A temporary worker was attempting to clear a jam on a bark conveyor when his arm was caught by a spool on the machine. The worker suffered a broken arm and was hospitalized. Surgery was performed to treat the injury.  ,1
"A stack of plywood came out of a press machine and did not fully roll out onto the roller bed to be picked up by a forklift. An employee tried to manually complete the cycle on the machine to move the stack of plywood. The load of wood then smashed his hand, breaking his thumb and lacerating his hand.",1
An employee received an amputation injury while operating a Vaneaxial fan (Serial# 135).,1
"While operating a tug, an employee was ejected when another employee cut in front of the tug.",1
An employee was conducting brick work from a scaffold. He fell 6 feet to the ground and broke both arms.,1
"An electrician who was pulling cables and doing rough-in work in an electrical room became ill, possibly due to heat issues.",1
"An employee was disconnecting railroad cars and setting brakes on the railcar. He tripped and fell backwards, trapping and injuring his right arm in the railcar couplings.",1
An employee was operating a radio frequency machine when he received an electrical shock to his left-hand ring finger on 4/22/15. He was hospitalized.,1
A employee jumped and/or fell off a box truck and fractured his ankle.,1
An employee was riding a horse in the feedlot and fell to the ground. He required surgery to repair the damage to his pelvis.,1
"An employee was taking down a scaffold when he fell through a hole in one of the scaffold planks.  He hit the railing on the scaffold when he fell, injuring his ribs. The employee was wearing fall protection at the time. He was hospitalized overnight.",1
An employee operating an asphalt tank truck was attempting to open the hatch on the trailer to unload the asphalt. The hatch blew open and hot asphalt landed on the employee's body. The employee fell off the trailer and was burned by the hot asphalt. The employee suffered second and third degree burns over his entire body.,1
"An employee grabbed the outside, top edge of the skiff's bulwark when stepping off of the pier and onto the skiff. A wave hit the side of the skiff, causing the employee to lose his balance. His finger got caught between the pier and bulwark, amputating his ring fingertip.",0
An employee injured his back while using a stair chair to carry a patient.,1
An employee was lowering material from the first floor to the basement using a hoist.  He put his left hand on the wire rope to position the load as he lowered it. His pinky finger got caught between the wire rope and the hoist.,0
"An employee was checking to see if a tester was clogged on the TRV Machine. The machine was not locked out/tagged out at the time. When he placed his hand to check the tester, the machine came down and cut his right ring fingertip.",1
An employee was walking back from retrieving a piece of equipment (a steel hook) to attach to a vessel when he tripped on the edge of a mat on the floor. The fall caused a laceration to the employee's elbow; he was hospitalized.,1
"An employee's finger was crushed by a piece of falling casing material. As a result, his finger was later amputated at the first knuckle.",1
An employee was hospitalized for an infection resulting from a finger wound (metal sliver in skin).,1
"Employees were doing layout work in the building on the floor. They mark lines to know where to set equipment to make wire. The equipment was blocking the layout line. They lifted the bar to set up the equipment with a 2x4. The equipment became imbalanced and titled over on the injured employee, breaking his leg below the knee.",1
"An employee was accessing a door into the fertilizer house. The step to the door was steep, and the platform/walking surface was a little damp. When the employee reached the step, he fell and broke his right hip. He was hospitalized.",1
"An employee fell while standing on a crescent wrench, cutting his leg on a valve.",1
An employee was sliding mail from a cart to the floor when she felt pain in the middle of her abdomen below the belly button. She was hospitalized for treatment of a hernia and required surgery.,1
"An employee was driving a John Deere tractor from the back of the store to the front. He ran over a speed bump, which caused him to lose control of the tractor. He hit a plant stand and broke his right leg when it got caught between the stand and the mower. He required surgery.",1
"An employee was in a 14-foot excavation installing a concrete box culvert. As he was climbing out of the culvert, he fell approximately 3 feet and broke his right femur. He was hospitalized.",1
An employee was riding an electric pallet jack and slipped.  She came down and pulled on the handle.  The pallet jack ran over her ankle.,1
"An employee tripped on a phone cord while walking into a meeting, hit her head, and was knocked unconscious.",1
"An employee reached into the bagger machine to pull out a bag that was stuck. His finger was pulled into the machine, resulting in a right middle fingertip amputation.",0
"On 04-23-2015, an employee got his thumb amputated and index finger fractured while removing tack welds to open up the shells in the North Bay.",0
An employee suffered second degree burns to his left foot when stepping into a walk-in dishwasher drain where the floor grate had been removed and hot water had accumulated. His vision was blocked by a metal chute he was carrying at the time of the incident.,1
"On April 23, 2015, at 6:45 a.m., an employee became pinned between a truss gantry and a table, causing a compression injury to his lower torso. The employee was hospitalized.",1
An employee was walking on the company walking trail when she fell and broke her hip.,1
"Employees were transferring a barge from dry dock to land. The barge commander gave the ""stand clear"" signal to everyone.  The injured employee's hands were not clear of the lifting cans. The employee's fingers on both hands were crushed between the lifting cans and the bottom of the barge.",1
"An employee was on a 12-foot tall step ladder, closing a junction box that measured 24 x 24 inches. He had placed a strap around the junction box to secure the cover while closing it. He lost his balance because the strap became loose around the junction box and fell approximately 8 feet.",1
"An employee was using a pipe to unjam a board in the sander machine. The pipe kicked back, hit him in the jaw, and broke his chin. The employee was hospitalized and required surgery on his chin and jaw.",1
"An employee was attaching drill pipe to elevators using his hands. His fingers got stuck between the elevator and the drill pipe, which broke two fingers (pointer and middle finger of the right hand).",1
"An employee fell from a ladder on April 23, 2015, causing a broken tibia on the employee's left leg.",1
"An employee received an amputation while working on the Komatsu machine.  The employee placed his hand under a guard and the machine activated, causing the thread roller to come down on the employee's hand.",0
"An employee was trying to replace a blown tire on the right rear side of his truck when the jack slipped, causing the truck to fall on him.",1
"An employee was conducting training on a glass molding machine that is not used for production.  The employee was feeling around the machine for air leaks when it cycled, causing loss of tissue, nail, and nailbed on the left-hand ring finger. The employee received surgery with some bone removal.",0
"A small crew was trimming trees. An employee in the bucket truck was moving a rope when the boom hit the ground and the truck tilted over at a 45-degree angle, causing the employee to sustain a fractured ankle and ribs.",1
"An employee was injured on April 23, 2015, at approximately 11:50 PM, when she was struck by a powered industrial truck driven by another employee. The injured employee sustained fractures of both ankles, requiring surgery and hospitalization.",1
"An employee was moving a heavy steel table that is used to straighten shovel blades when he slipped and fell, hitting his head on the table. He broke his jaw and cheekbone.",1
An employee dislocated the left index finger after crashing an ATV during the pursuit of subjects.,1
An employee was loading the strander machine with a coil of wire. The employee was lowering the coil into the cradle of the machine when the cover of the cradle struck the employee.,1
"An employee was dismounting the back of an open deck truck. The employee's left ring finger got caught between the rolled up hoses, causing a finger amputation.",0
"An employee was working on the packing line. The employee's right hand got caught in the conveyor, and the index and middle fingers were amputated. The guard was not in place at the time.",0
"At 4:50 AM on 4/24, an employee was collecting a sample of black liquor. The sample splashed from the cup onto the employee's face, burning his face. He was hospitalized.",1
An employee was cutting pork loin using a band saw. He amputated two fingertips (middle and ring finger) on his right hand.,0
"An employee was taking apart a metal table to move it to another location. The table slipped and struck the employee on the head, resulting in a laceration.",1
"An employee operating a swager bypassed a guard and smashed the left-hand pointer and middle fingers, resulting in multiple amputations.",0
"An employee was handling lumber and cut his finger. After bandaging the cut, he walked away, passed out, fell to the floor, and struck his head. The employee was unconscious and hospitalized.",1
"An employee was holding a piece of string connected to a drill bit; when the drill cycled, it partially amputated the employee's right index finger.",1
"A pendant line on a crane was secured to the crane's boom. As the boom was being elevated, the pendant line broke loose and went through the crane cab, striking the injured employee in the face/head. The employee was hospitalized.",1
"An employee fell down stairs, critically injuring himself.",1
"On or about April 24, 2015, at approximately 1:18 PM, an employee fell approximately 10 feet while working from an elevated platform attached to a fork truck. The employee sustained serious injuries and was hospitalized.",1
An employee was directing a forklift with a load trying to get it on a trailer. The employee got caught between the forklift and the rail while holding the tote support.,1
"An employee was strapping down building material on a trailer. A second employee who was operating a forklift did not see the first employee and backed up. He ran over the first employee, causing a fracture and open wound to the first employee's left leg just above his ankle. The employee was hospitalized.",1
"An employee was taking cases of water from a pallet and loading them on a cart. The employee tripped over shrink wrap removed from the pallet, fell, and broke the right hip.",1
"An employee was operating a roller machine to bend a part when his gloved hand was pulled into the machine, crushing two fingers on his right hand.",1
"An employee was hanging electrical conduit at a jobsite in West Lebanon, New Hampshire, at 4 pm on April 24, 2015. He fell approximately 10 feet off of a ladder and was hospitalized.",1
"At approximately 11:20 a.m., four employees were relocating a rolling scaffold hooch. While trying to move the hooch into position, one of the caster wheels got stuck. The employee tried to redirect the caster to align it with the others. His right-hand pinky finger got caught between the hooch's scaffold leg and a steel saw horse, resulting in an amputation to the fourth digit on the right hand just above the first joint.",0
An employee's left middle finger got caught between the mandell and end of a cold work gun.,1
"An employee was struck-by a co-worker driving a 3/4 ton pick-up truck while walking to the job-site trailer. The employee suffered crushing injuries to the foot, ankle, and leg.",1
An employee was operating a stand-up forklift in a warehouse when he struck a dock plate and was ejected. He sustained a fractured right lower leg.,1
"An employee was helping a patient stand when the patient lost his/her balance and fell.  The employee was struck in the left leg when the patient fell, sustaining a broken knee.",1
"On April 21, 2015, an employee suffered an abrasion of the right elbow while doing computer animation.",1
"On April 24, 2015, an employee sustained an injury from an electric shock while resetting the power on a water heater, requiring hospitalization.",1
"An employee had the tips of his ring and middle fingers amputated above the fingernail during an outlet valve installation.  The outlet valve moved suddenly during the installation, causing the injury.",0
An employee placed his arm in a conveyor and broke his wrist.,1
An employee was hospitalized after a forklift accident.,1
An employee attempted to open a jammed gun locker that then fell on her finger and amputated the tip. She was hospitalized.,0
"An employee's finger was crushed while performing rigging-down operations at a well site. The employee was hospitalized, and surgery was performed to remove the left index finger to the first knuckle.",1
An employee stood up to go to the restroom and fell down. She broke her leg.,1
An employee suffered burns from a flashover fire.,1
"An employee was running a panel that opens/shuts hydraulic valves, pumping nitrogen.  The employee was told to open the valve slowly; a flashover occurred when this action was taken.  The employee was hospitalized for burns.",1
"An employee was helping a customer unload scrap metal at the scrap metal facility in Lebanon, Pennsylvania, when the employee's finger got caught between the tailgate. The employee sustained a left middle finger amputation just below the nail; there was no nerve damage, and the fingertip could not be reattached. The employee was wearing gloves at the time.",1
An employee went outside to investigate an odor. She approached a dust collector and stuck her right hand into a hopper that contained a rotating discharge valve. She amputated three fingers.,1
"An employee stepped up onto a piece of concrete to turn off a valve approximately 8 feet from the ground below and fell backward, hitting his back on a metal rail behind him.",1
An employee sustained an amputation to the right middle finger while performing work on a press brake.,0
An employee was preparing to administer an IV when she slipped and fell. She twisted her ankle and broke two bones in her leg. This resulted in a hospitalization and subsequent surgery.,1
An employee fell from a 1-tier scaffold and sustained a head injury.,1
"An employee working in the rework line operated the cat puller to remove rubber from a 0.367-inch hose. The employee's right glove was drawn into the rotating belts of the equipment, causing a fracture to the right thumb.",1
"An employee was delivering mail on a mail route. She was moving the postal truck to the next stop when she heard loud engines approaching her vehicle. The racing car was unable to stop before hitting the rear end of the postal vehicle. After impact, the postal vehicle traveled approximately 40 feet. The employee was hospitalized for broken ribs and a broken collar bone.",1
A maintenance employee partially amputated his left ring finger when replacing pins for the roller machine.,1
An employee's fingertip was bitten off by a Pitbull while the employee was delivering mail on a walking mail route.,0
"On or about April 25, 2015, an employee was caught-in an ice machine while cleaning it. The unit was not completely powered down at the time, causing an amputation of the right pointer fingertip.",1
An employee working in the bakery department amputated her right hand index finger while she was operating a large mixer.,0
An employee was pushing a rolling cooler out of an elevator. The cooler started to tip over and fell on her left foot.,1
"On April 26, 2015, a resident treatment worker intervention specialist (RTWIS) and two supervisors, members of the crisis team, were attempting to stop a resident from traveling from his/her assigned unit to a different unit.  The intervention took place on the landing of the stairwell.  The crisis team used a hold technique on the resident which resulted in the RTWIS falling on his left elbow and both knees.  A cut on the left elbow led to cellulitis (infection of the skin).  The RTWIS was hospitalized from for intravenous antibiotics.",1
"On or about April 26, 2015, an employee was cleaning the inside of a vessel with a water pressure gun when he slipped and his left foot entered the path of the pressure gun causing lacerations. The employee was hospitalized and received stitches.",1
"An employee was installing a fan guard on a refrigeration unit and fell from a one man lift.  The employee had a harness with a single lanyard on at the time of the incident.  He reached up to put guards on top of the unit.  As he was trying to reach a bolt at the 12 o'clock position, he stepped on the middle rail of the lift basket, disconnected the lanyard to tie off on a bracket for the refrigeration unit, flipped, and fell 25-28 feet.",1
An employee was hospitalized due to a fall caused by missing a step down while exiting the room.,1
"An employee hooked equipment with a pulley, and the clamp pinched his middle finger on his right hand.",0
"An employee was standing next to a pallet containing a box of yarn. The employee fell after twisting while unloading the box and broke his hip, requiring hospitalization.",1
An employee tripped over a cord and fell on her left side fracturing her pelvis.,1
An employee fell off of an electric pallet jack onto the concrete floor after turning into an aisle.,1
"An employee fell approximately 15-18 feet off of a rail car during the loading process. Fall protection was worn, but was disconnected at the time of the accident.  The employee fractured three vertebrae in his back and suffered a head laceration that required staples.",1
"An employee was working with a turret winder. During the automatic transfer, the machine malfunctioned and a sheet dropped off. The employee reached under the machine to place the sheet back on. While placing the material back onto the core, his left arm got caught in the machine. The machine lifted his body up breaking his left arm and left leg by wrapping him inside the product on the core.",1
An employee was at the construction site and tripped and fell to the ground resulting in a broken nose.,1
"An employee fell while walking towards a gate, resulting in a concussion, brain swelling, and a spinal fracture. The cause of the fall is unknown.",1
An employee's hand was crushed while handling equipment from a forklift to the flat bed trailer.,1
A worker was installing soffits and while removing old boards a board fell striking the worker's left hand and pushing it into the rotating blade of the skill saw.,0
An employee fell and fractured his/her back after a fall from the rear of a truck.,1
Two temporary employees were in a altercation in the workplace and one was hospitalized overnight due to a head injury.,1
An employee was going to retrieve product from the cooler and slipped on a tray liner that had dropped off of a cookie tray and injured her lower left leg and her head.,1
An employee stood up from her desk and tripped on the floor mat or her purse and fell. She broke her knee and shoulder.,1
Employee experienced chest pain while wrenching at work. Employee was hospitalized over night.,1
An employee was installing a new electrical panel when he sustained burns to his hands and face.,1
Two employees were performing maintenance on a boom truck.  As employee one was coming down off the truck he placed his hand into the cradle where the boom rests.  Employee two did not see him and started to lower the boom resulting in the amputation of employee one's right middle  fingertip.,1
"On or about April 27, 2015, an employee was injured when he climbed up racking to pull an order and fell 14 feet.",1
Two employees were separating a motor from a transmission. When the last bolt was taken out the motor dropped approximately 3 inches onto the injured employees right pointer finger pinching it against the cement floor.,0
An employee tripped on a water hose and broke her right ankle that needed surgery to repair.,1
An employee was thrown from a Bobcat that overturned and the roll bar struck his left foot resulting into broken toes and swelling.,1
"An employee was oiling the conveyor chains at the end of the main saw roll-case (conveyor) near the lumber backstop.  When lumber from the main saw reaches the end of the roll-case conveyor near the backstop, the lumber trips a lever arm limit switch, activating a lumber sweep that pushes the lumber onto a perpendicular conveyor.  The employee was standing near the sweep when he tripped the limit switch causing the sweep to activate.  The employee was standing in the path of the sweep.  When the sweep activated, it struck his left foot, crushing the 1st joint of his big toe.   The joint was later amputated by a physician.",1
An employee was operating a bucket truck when the hydraulic line hit a tree and damaged it. When the employee moved the bucket it dropped and struck an employee injuring his arm.,1
An employee was transferring calcium chloride from a railcar to a silo using a bucket elevator. A heavy downpour occurred during this process and water entered the bucket elevator. The elevator became choked and the employee attempted to clear the choke using water. This created an exothermic reaction and the employee suffered burns and also fell down some stairs as he was leaving the area.,1
An employee was bitten by a rattlesnake while working in a pasture.,1
"An employee was working from an 8 foot ladder to hang an air hose reel weighing 44 pounds. As the employee was trying to lift up the hose reel, he lost his balance and fell hitting his midsection on the metal lathe chip guard.",1
An employee fell off a 10 foot ladder while coming down from the roof after performing maintenance.,1
"An employee's left, fourth finger got caught in the roller of the pillowcase folder.",1
"On 04/27/2015, an employee was changing settings on a welding gun and punctured his knee with welding wire.  The employee was admitted to the hospital and treated for cellulitis and an abscess.",1
An employee had his hand on the back door when someone opened the front door and the draft caused the back door to open and jammed his finger.,1
"The employee was moving furniture and cleaning up at the Red Roof Inn. He finished one room, walked upstairs, and collapsed.",1
An employee's left hand and wrist were cut while trying to stop a turbine blade.,1
An employee was stepping out of a forklift when another employee on a pallet jack came around the corner striking the first employee and breaking her leg.,1
An employee removed the guard from the M-28 Whitener to clean it and his hand was caught in the auger causing an amputation injury.,0
"An employee was injured while welding a joint on a field plate.  When the joint was re-lifted, the weld broke, and a field plate landed on his left foot.  The resulting fractures required surgery.",1
An employee was cleaning cans from the filler machine when his/her hand was caught in the machine resulting in the amputation of the right 5th finger.,0
An employee cut a finger with a saw.,0
"At a residential garbage pick up location, an employee was picking up a toilet to place into a Waste Management Bagster Dumpster Bag tote.  The toilet hit the side of the tote and fell from the employees hands.  The employee was cut on the right forearm by pieces of the broken toilet.  The employee was hospitalized overnight for surgery to repair the cut and muscles damaged by the laceration.  ",1
An employee was climbing a scaffold used to access the work area and fell 11 feet to the ground.,1
"On or about April 27, 2015, an employee sustained serious injuries to the left foot and right hand after being struck by a steel coil which resulted in a fall.",1
On 4/27/15 at approximately 10:56pm an employee was walking over to an area where a tree had knocked down power lines and came into contact with the energized line. The employee received 3rd degree burns and was hospitalized.,1
An employee suffered a fingertip amputation while operating a miter saw.,0
"On 4/30/201, an employee doing hot work received serious burns.",1
"A worker was in the process of moving a large round plate off of the top of the fixture when the plate became stuck on one of the mounting bolts. The plate then shifted, swung around the fixture, toppled over, and struck the worker in the left foot.",1
"On or about April 28, 2015 at 12:30 PM two employees were repositioning a water buffalo on the jobsite. The water buffalo had been delivered by a dump truck so the spring lock handle was positioned and supported too high to be placed onto a pick up truck hitch. To lower the spring lock handle, the employee kicked away the dunnage that was supporting the handle.  In the process of removing the supporting dunnage the handle became unstable and fell to the ground, striking the  employee's left foot and breaking it.",1
"A maintenance employee was trying to fix a heat seal machine when the machine activated and closed on the employee's hands, causing burns and potential crushing injuries.",1
A maintenance associate was on top of the scrubber unit on the mezzanine level. The guard rails had been removed to allow access for replacement units. The employee walked backwards off the mezzanine to the floor below.,1
On 4/28/2015 an employee was tightening a bolt with a wrench resulting in a hernia. The employee was admitted to the hospital for surgery.,1
An employee was threading material onto a foaming drum on line four when his glove was caught pulling his right hand between the forming drums and injuring his fingers.,1
An employee partially amputated his right thumb as he attempted to clear a jam on the CSL line machine.,1
"An employee was performing cleaning operations outside near the gas pump, when a vehicle pulled up to the pump and ran over him.",1
An employee fell and hit his head while delivering Meals On Wheels to a customer's home.,1
An employee amputated the left thumb while slicing bread in the deli.,0
An employee was carrying a box up the steps to the walk-in freezer. The employee miss-stepped and fell.,1
"A dump truck driver was dumping on a slight incline when the dump truck tipped over onto its lift side (passenger side). The driver was not wearing a seat belt and fell to the passenger side, fracturing the left femur bone and was hospitalized.",1
An employee was seriously injured when cases of paper products fell and knocked the employee down fracturing the employee's hip.,1
An employee was operating a powered pallet jack to take a pallet to the repair area. The pallet jack suddenly stopped. The employee fell off the equipment and onto the floor suffering some broken bones.,1
An employee was unloading a banded copper wire bale when the banding on the wire broke causing one of the bales to fall and land on the employee's leg fracturing it.,1
"On or about April 28, 2015, an employee sustained a serious injury to the left hand while changing the RLCH chop saw blade located in the finishing department. The saw was not locked out at the time of the incident.",1
An employee sustained a right ring fingertip amputation when placing the right hand on the rail of moving equipment.,0
"An employee suffered the amputation of his right index fingertip on April 28, 2015, when a metal fire door in the breezeway slammed shut.",1
An employee operating a metal shear received a fingertip amputation on the middle finger of his left hand.,0
A third party contractor was nippling up a production tree. The employee was tightening the bull plug and the wrench slipped off causing the employee to lose balance and to fall approximately 5 feet to the ground.,1
An employee performing paving operations was stuck by a vehicle and hospitalized.,1
On 4/28/15 at approximately 6:30am a forklift operator was traveling in reverse down a ramp when he struck and ran over another employee .,1
An employee was struck by a company truck at the company's construction yard and hospitalized for a broken leg.,1
An employee was in the process of putting pipe into a machine when a clamp caught his left index finger and removed his fingertip. The employee was treated at the hospital and released.,0
As an employee was closing two bi-fold doors his right arm got caught between the two doors causing puncture wounds to his lower bicep.,1
A machine operator was unjamming the Swiss-style screw machine while it was energized.  It activated and amputated his left index finger.,1
An employee was operating a motorized pallet jack.  He fractured his right thumb when it became caught between the grocery rack and the handle of the pallet jack. The employee was hospitalized for surgery.,1
An employee was admitted to the hospital with a fractured tibia and fibula after loosing his balance in the kitchen area.,1
An employee sustained a fractured pelvis and right leg after being ejected from a personal basket attached to a telehandler and falling approximately 15 feet.,1
A biology teaching assistant slipped and fell fracturing her femur. There was a water leak from the freezer which caused the slip and fall.,1
"The employee was working as a roll up operator and placed his foot on a roll of carpet which was on the cradle. The carpet rolled onto the employee's right leg, breaking the tibia and fibula.",1
"While climbing a ladder, an employee lost his footing and fell approximately 6 feet and broke his leg.",1
"An employee was overseeing the transport of product from the upper level to the lower level, when he stepped into an opening and caught his upper body in the opening. The employee caught himself with his upper body. He did not fall to the ground.",1
An employee broke his left leg after he fell off of a baker scaffold.,1
"An employee operating a prime mover slipped and received a contusion on the leg.  Three weeks later, the employee was admitted to the hospital due to an infection of that injury.",1
An employee was rocking in his work chair and fell backwards resulting in a fractured rib and a punctured left lung.,1
An employee punctured a lung while moving welding equipment into a work area.,1
"An employee was unloading door material from an elevator when the material fell hitting the employee.  The employee suffered cuts, broken fingers, a broken hip, and an amputated right thumb.",1
A temporary employee received an amputation injury.,1
"An employee walking with a tool in hand ran into a second employee, lacerating the second employee's right elbow.",1
An employee was using a table saw to cut a 10' board. The board kicked back and his fingers went into the blades cutting through 4 fingers.  The employee was hospitalized.,1
An employee got his hand caught in-between a metal auger blade and the metal frame of the auger while in the process of breaking it down for sanitation. The tip of his left hand middle finger was amputated.,0
"An employee struck a tree and broke her right ankle while driving between scheduled delivery points. The employee lost control of her vehicle while attempting to avoid a dog. The brakes locked, causing the vehicle to slide across a grassy area and into a tree. The employee was hospitalized and received surgery.",1
"On or about 04/29/2015, an employee was hospitalized when she fell down the outside steps and landed face down, injuring her head and experiencing tingling and numbness.",1
"An employee was setting up a machine and was de-beaming.  During rethreading, two of his fingers became caught in the hooks and injured the right, middle finger.  He was taken to the hospital and his fingertip was re-attached.",1
An employee was operating a stand on mower and it got stuck. The employee got off the mower to see if he could dislodge it. When he got off the mower it started to roll. He tried to stop the mower with his body and it rolled on him resulting in injury.,1
An employee operating a radial saw in the door shop sawed through his left forearm.,1
"On or about 4/29/15, an employee was shocked and fell off a ladder while putting in electrical wiring.",1
An employee was working in the bakery department freezer and cut the palm of the hand and wrist with a box cutter while opening boxes.,1
An employee fell either from the roof or ladder of a mobile home unit. He does not remember.   The employee was inspecting the roof for hail and wind damage.,1
"An employee's right middle fingertip was amputated on a Shear machine.  The cylinder, which comes down with the guard and holds the material in place, came down onto the employee's finger when he engaged the foot pedal.",0
"An employee was standing on an order picker to check the quantity of product in a slot, lost his balance, and fell 12 feet.",1
"An employee was on a construction site. He was loading a tractor onto the low boy rig in order to move it to another location. He was also loading another piece of equipment; neither piece of equipment fit. He walked between the pieces to adjust them, and the tractor rolled into him. He got caught between the two pieces in his thigh area.",1
An employee was delivering roof trusses to a new residential home site.  The delivery truck bed was on an angle allowing the trusses to slide off the truck bed. A wooden girder came off the top of the stack striking the employee in the back and right foot. The employee had broken ribs and a broken right foot.,1
"On or about 4/29/15, an employee's index finger on right hand was amputated while cutting a 2 x 6 wood slab on a table saw. The employee was hospitalized. The employee's 4th and 5th digits on the right hand were repaired as well.",1
An employee's right hand was caught while removing a mold jam causing his right hand to be severely pinched. The resulting injury required surgery.,1
"An employee was assisting a rigger unload material. While unloading the material, the load leaned and one of the forms (whaler pieces) split out and struck the employee's leg.",1
An employee amputated the left index fingertip while using the 517 winder trim slitter machine.,1
"An employee, carrying a box down a fight of stairs, lost balance and fell down the stairs and was injured. The employee was hospitalized.",1
An employee sustained an amputated right little fingertip (1/2 inch) while opening the door to a 30 yard roll off dumpster.,0
Employee taken to hospital for possible inhalation exposure to product.,1
"On or about April 29, 2015, an employee operating the #3 Bander/Strapper in the Planer Mill was injured when the machine's bump plate came down on the employee's left hand resulting in crushing type injuries.",1
An employee was hospitalized for burns.,1
"An employee sustained a head injury while working around the G&L machine in the Hill building.  He slipped and fell, hitting his head on a nearby object.",1
While bolting two metal plates together one plate slipped and severed a finger.,1
"Employees were manually aligning 6""x6""x9' stainless steel beams weighing approximately 300 lbs on the tank stands. The injured employee and another employee were aligning beams in the same sequence on the same line.  The supervisors were making the final adjustments when the employee attempted to help and his right little finger was pinched between the beam and the beam that was already in place.  The employee was wearing gloves at the time of the incident. This resulted in a partial amputation of the little finger on the employee's right hand.",0
The employee was a passenger in a golf cart and fell out as the cart went around a corner.,1
An employee was dismantling a scaffold when he fell 12 feet.  He broke his left hip and pelvis.,1
"On or about April 30, 2015, an employee was helping a second employee position a fallen log so that the grapple of the front-end loader could pick the log up from the ground. The second employee struck the log with such force that the log moved horizontally in a right-to-left sweeping motion, striking the first employee in the leg area and resulting in two breaks to the left leg and a broken right ankle.",1
A 3-foot perforated pipe was being taken out of a trench for assembly.  The pipe had residual methane gas that was ignited when the McElroy fusion equipment was turned on.  An employee was severely burned and required hospitalization.,1
An employee bypassed the safety trigger on a pressure washer and received lacerations to the hand from water.,1
"On April 30, at 9:15 a.m., an employee fell from a ladder while dismantling a scaffold inside a tank.  The fall was less than 20 feet. The dimensions of the scaffold were 10x10x33. The employee fractured both heels and sustained a small skull fracture that required stitches. The employee was hospitalized.",1
An employee was hospitalized after being struck by soil/dirt while working within a sloped trench that was approximately 9-feet deep. The employee injured the right leg.,1
An employee was guiding a pipe bundle. The pipe shifted during crane transport and pinched off the employee's fingertip.,0
An employee working on a core machine in the core room had the right pinkie finger amputated as a result of injury. The spreader box stopped indexing across the carrier. The employee went around to the back side of the core machine and noticed that the dowel pin had broke and the back spreader box support wheel was dislodged from the rail and appeared stuck.  The employee pushed on the bracket just behind the wheel to try to get the spreader box back on rails and the wheel shattered.  The pressurized cylinder snapped forward and caught his pinkie and ring finger on the right hand.  The right pinkie finger was surgically amputated.,0
An employee was injured by a brush wire and was hospitalized after infection spread to his arm.,1
"On 4/30/15, an employee was found unconscious in the restroom after hitting his head on the floor next to the conveyor in the warehouse.",1
"An employee got his hand caught in an auger while cleaning, resulting in the amputation of his left middle finger at the first joint. The non-interlocked guard was removed at the time.",0
"An employee was elevated in a work platform attached to a forklift when a piece of conduit fell, striking the basket and knocking him from it.  He fell approximately 20 feet and sustained a broken wrist and leg, requiring surgery.",1
An employee was on the back of a concrete delivery trailer holding onto the fixed ladder. When he stepped to the side to allow another employee down from the ladder he slipped and fell off the back of the truck.  His injury was an open fracture of the right tibia.,1
"Employees were removing downed trees blocking a roadway. A pickup truck got stuck in the mud.  An employee used a dozer to remove the truck, which got wedged next to the tree. The employee used a chainsaw to cut the tree, and the tension caused the tree to snap and injure the employee. Three bones between the knee and left ankle broke. The employee was hospitalized.",1
An employee reached into the rotating surface grinder and injured their hand between the thumb and forefinger.,1
"An employee was lifting sheet metal to put in the dumpster when he felt a bubble-like substance, resulting in a hernia.",1
"An employee reached into and under the light curtain of an automatic bagger that was jammed. His finger got caught between two pieces of metal, amputating his right ring finger at the first knuckle.",0
"An employee was working near Grand Isle. He tripped over a rock on the side of the road and fell onto a large piece of glass, cutting his hand. He was hospitalized and underwent hand surgery.",1
"An employee was on a lower level roof (unknown height) and was climbing an attached ladder fixed to the building to go to the upper roof. He was almost to the top of the ladder when he missed a step and fell approximately 15' to 18' onto the lower flat roof. He landed on his feet first, then buttocks, and finally his side and was unable to get up. He was hospitalized and required surgery for a broken right femur.",1
"An employee removed screws from a bus bar in a panel board, resulting in an electrical short that caused an arc flash. The employee was hospitalized with severe burns.",1
"An employee reached into a 12-inch pipe opening and a hydraulic valve closed on his left hand, partially amputating three fingers and causing skin loss to the back of his hand. He was hospitalized.",1
An employee was hospitalized after accidentally ingesting an unknown chemical and vomiting.,1
"An employee was shutting a safe and got her finger caught in the door. Her fingertip was severed, requiring hospitalization and reattachment surgery.",1
"On or about April 30, 2015, an employee was injured while responding to a sales call.",1
"An employee working at the alignment hoist was checking the vehicle suspension.  The hoist dropped down, pinning the employee's left forearm between the car and the hoist.",1
The employer made sheet metal components for building construction materials out of rolled steel.  The employee was working at the standing seam line (metal roll former machine) when the strippable wrapped around a die.  The employee lifted the guard and clicked the override switch to allow the machine to continue to operate with the guard in the up position.  The employee had a pendant control to jog dies and pulled the strippable with the other hand.  He reached in and grabbed the strippable and hit the reverse button on the pendant control resulting in the employee's hand being pulled between two dies.,0
An employee was operating a core machine when he got caught in the machine.  He suffered a finger amputation.,0
A truck driver sustained several broken bones after either being struck by falling trusses during unloading or when diving under the truck to avoid being struck by the falling trusses.,1
An employee was servicing a forklift and the left index finger was caught in a moving pulley resulting in surgical amputation of the fingertip.,0
"A longshoreman was in Hold #2 preparing to discharge cargo.  The pontoon decking did not fully cover leaving an open hole from the lower tween deck of a ship into a lower hold area (approximately 32 feet).  The employee fell through the open area.  He admitted to the hospital with a head injury (swelling and bleeding), broken ribs, a shattered elbow and heel, fractured vertebrae and a fractured leg.",1
An employee tripped walking down stairs when exiting the building and broke the left ankle.,1
"On May 1, 2015 at approximately 11:00 AM two employees were riding in an off-road ATV along the Lechate levee pond when the driver hit a rut and lost control of the vehicle. This caused the vehicle to slide and flip, ejecting the driver into the path of the roll over. The driver sustained injuries to his jaw, collarbone, ribs and internal bruising to his liver. The passenger was not injured.",1
An employee was attempting to offload a car hauler when he lost his balance and jumped off the trailer approximately 5 feet 3 inches landing on his left leg. He sustained multiple fractures to the leg bones and was hospitalized for surgery.,1
An employee tripped over a cone and fell on her right hip.,1
"An employee was injured when a hydraulic hose from a hydraulic pump busted.  The employee was performing a lug-nut connection on a cable-end. The employee received injuries to his upper right thigh. Hydraulic fluid penetrated into the employee's leg 1/2"" wide by 3/4"" deep.  The employee was hospitalized for observation.",1
An employee was preparing to move from a ladder to the catwalk surface of a rail car when the rail car moved. The employee lost his balance and fell approximately 15 feet injuring his pelvis.,1
An employee was moving a pallet when a swing gate opened causing him to lose balance and fall through the opening approximately 8-9 feet to the ground.,1
"An employee was installing a rear, overhead vehicle door with another employee. During the installation process, the overhead door came down on the employee's right hand index finger and severed a tendon.",1
Employee performing flow-back operations at an oil and gas well site received burns from a flash fire.,1
A welder was using a 4 inch handheld carbon tooth cut-off saw to cut an aluminum block off a Bradley vehicle when the saw bounced back and hit him approximately 2 inches above his right knee causing a severe laceration.  The employee was taken to the hospital for surgery to repair the injury.,1
An employee was bitten by a spider on the left hand which resulted in an infection. ,1
"An employee was changing out compressors on the roof of a building. While un-sweating the oil equalizer line, the torch came in contact with the refrigerant oil and caused a flash burn that injured the employee.",1
"The employee was helping to secure a concrete wall panel that a backhoe was putting into place. The panel was secured and then the backhoe released the load, but the bottom of the panel came loose. The panel fell and struck the employee in the chest and left hand. The employee sustained broken ribs and abrasions on his hand.",1
An employee climbed a ladder inside a fenced area to clean an eye sensor and was injured when the shaker struck his finger. He lost his nail and fingertip.,0
"An employee's glove got stuck when loading a part into Shear # 3.  When the employee used his left hand to pull his right hand out, he kicked the foot pedal and cycled the machine, pinching the end of the middle finger on his right hand between the part and the machine.",0
An employee was hospitalized for electrical burns to both hands while running an AC hipot test.,1
An employee was hospitalized for a cut finger.,1
An employee walking in a corridor was struck by a swinging door. The employee fell and suffered a hip fracture.,1
An employee suffered a partial amputation injury when his fingers were caught in a pinch point between the hoist line and sheave.,0
An employee was attempting to put bails of hay into a pulley when his hand slipped between the pulley and belt partially amputating the middle finger on his hand.,0
An employee got his foot caught in a pallet on the truck that he was moving and fell to the ground breaking his right arm and wrist.,1
An employee amputated the tip of his right thumb with pneumatic scissors.,0
An employee was operating a baler when some cardboard got stuck. This affected the operation of the baler. The employee used a hook to dislodge the cardboard. The baler caught the hook and pulled the employee's right hand against the frame of the baler injuring his hand. The employee was sent to the hospital and kept overnight due to his injuries.,1
An employee got his hand caught in the blade of a grinder cutting the fingertip and nail of the 3rd digit of the right hand. The fingertip was surgically amputated.,0
An employee was securing a load inside of an enclosed semi-tractor trailer when a tightener came loose.  The employee fell back out of the trailer and busted his leg below his left femur. He was hospitalized.,1
"An employee was on a tubular pile adjusting straps. The pile rolled, catching his foot and causing him to fall, fracturing his right leg. No cribbing was used at the time of the incident.",1
"An employee was drilling on an electrical panel using a cordless Dewalt 20 volt drill when her glove got caught.  Her hand placement was directly behind the 8"" drill bit.  The grove somehow wrapped into the bit and pulled it through.",0
An employee's lawn mower got stuck. Another employee attempted to use a second mower and a sling to pull it out. The sling came loose and struck the employee in the head.,1
An employee received an amputation injury to fingers on the right hand while changing the cutter on a molder.,1
Fall,1
An employee working on table 1 had the distal tip of the 3rd finger on his right hand amputated while operating the coat hanger machine in the Unicore Factory. The machine was not guarded at the time of the incident.,0
"A truck driver was collecting cardboard on his route. While collecting cardboard at a residence, the employee went up on the truck to remove material that had been stuck. The employee leaned on the truck to push the recyclables and fell to ground.",1
A pinch point between the electric torque and a metal plate caused an employee to amputate the left index fingertip while using an electric torque wrench.,0
"An employee's hand was caught underneath the interlocked door of a DR 2203 machine and the cutter that cuts the snow (e.g. nylon overwrap) amputated his right, middle finger just below the fingernail.",0
A temporary worker fell through an unguarded open way from the second floor while unloading dry wall.,1
"An employee was working as the aft-inshore general longshoreman on a vessel. A container was being discharged from the vessel onto a chassis truck. As the container was lowered into position, the employee was removing a semi-automatic twist lock from one corner of the container when the top half of his right index finger was caught between the container and the chassis. The employee was hospitalized and his top right index finger was removed.",1
An employee operating a forklift had his hand on the roller and was turning and caught his hand between the roller and the compactor breaking his finger and cutting his hand.,1
"An employee was climbing down from an auto transporter trailer, lost his balance, and fell about 8 feet landing feet first. The employee complained of a sore ankle and back and was hospitalized.",1
An employee was injured in Plant B at the 3-2 straightener during a guide change.  The employee was struck by a 1000 pound guide and then fell down the slide/chute into the scale pit.,1
"On Saturday May 2, 2015, at approximately 9:00 a.m. an employee was lowering a 2000 lbs mold onto the assembly table in the assembly area with assitance from another employee. This was a second mold part that the employees were working on that morning. This mold was standing up on the assembly table approximately 3 ft. high. This mold was lowered with an overhead crane and attached straps onto the four 2x4 supports located on the assembly table. The straps were removed and the mold slipped off the supports subsequently falling off the table and striking the employee resulting in a severe left arm laceration (skin graft) and multiple fractures in the right arm, hand, and fingers.",1
"An employee was struck by a car when he was crossing the street to perform grounds duties on the opposite side of the university campus. The employee sustained scrapes to the head, lacerations to the neck and contusions on both legs.",1
An employee was standing on a rail dock plate. A forklift truck ran over the dock plate causing it to shift. The employee fell  4 ft. to the ground sustaining a head injury.,1
"An employee in the hot food processing area had an aerosol can of cooking spray (an industrial size can of ""Pam"") that was placed next to a burner.  Approximately 1 to 1/2 hours later, the aerosol can exploded and ignited into a fire ball. The employee received first and second degree burns on the hands and neck, requiring hospitalization.",1
An employee was working on the buffering lines running a cable. The jacket came off while he was trying to restring the machine. He pulled the yarn and the dance arm became loose pulling the yarn and causing it to tighten. The yarn tightened around his right middle finger causing an above the bone amputation.,0
An employee had his foot pinned between a pallet jack and a rack.,1
An employee suffered a chemical burn on the back of the knee from CP 310 cleaning chemical.  The employee was wearing PPE and knee pads. The employee was hospitalized.,1
"On or about May 3, 2015, an employee's right index fingertip was amputated when he tried to unclog an ice shaver with a plastic spoon and accidentally stepped on the control pedal, which engaged the blade.",0
An employee was cutting boards and making sticks when a board got jammed in the saw. The employee tried to unjam the board and upon removing the jammed board the conveyor to the machine became activated. The employee's right ring finger was amputated.,0
An employee shopping for a client was struck by a car in the store parking lot.,1
"The employee was pouring metal (aluminum) from one ladle into another ladle that had been freshly coated with mold paint.  When the molten metal hit the wet paint it ""popped"" and splashed molten metal onto the employee burning the employee's face, arms and body.",1
"An employee was unjamming an infeed on a planer. When he unjammed the feed, his left hand got caught by the pineapple rolls, breaking three fingers.",1
An employee was stripping concrete form work. The employee was tied off to the concrete form work when it moved and fell to the ground. The employee was pulled by the falling form work and hit the ground. The employee fell 14 feet and was hospitalized with head and back injuries.,1
"An employee sustained a right calf injury, resulting in hospitalization.",1
"On May 4, 2015, an employee was cleaning the strapper on the bailer unit.  The employee suffered a fracture and partial amputation of the right index finger after his finger was pulled into the pinch point between the two pinch wheels of the machine.",0
"While fixing a condenser unit, an employee's glove got caught by the belt pulley, amputating two of his fingers.",0
An employee broke his foot while trying to leave his car with his wheel chair on 05/04/2015 at 4:30 PM.,1
An employee was applying a hydraulic clamp when he placed his hand at the point of operation.,0
"On 05/04/2015, at approximately 12:45 PM, an employee was assembling tools to hammer down some parts in the shop area of the work facility. His hand slipped, and the tool struck his right hand, amputating the right little fingertip. He was hospitalized.",1
"A forklift load fell and struck an employee who was walking in the aisle, breaking his leg and cracking his knee.",1
"An employee was standing on a 6-foot scaffold lifting a board when he lost his footing, fell to the ground, and broke his arm.",1
"An employee was threading up a draw block on machine D21 (drawer) in jog mode. During the task, the employee was putting a chain on the draw block to pull wire through it. The employee had their hand under the chain to check the tension. The chain became tight and flipped up on the draw block, pinching and injuring the employee's finger.",0
"An employee was placing stickers on a transformer lid. His left hand was still on the lip of the lid as he closed it; the steel lid slammed down on his hand, catching his left index finger.",0
An employee was moving a bundle of steel and hurt his back.,1
"An employee was training a junior employee. They were troubleshooting an electrical exhaust fan. The system was locked out at the time. The employee began manually rotating the pulley via the fan belt.  As the employee pulled the belt, he drove his left hand between the belt he was pulling and the pulley. This crushed his left-hand ring fingertip, including the tip of the fourth distal.  He sustained an amputation of the fourth distal, from the nailbed to the fingertip.",0
"A road construction crew was using a track-hoe to cover a hole in the roadway with a steel plate.  The chain rigging used to suspend the plate slipped or otherwise failed, causing the plate to shift.  An employee tried to prevent the plate from falling, which resulted in injuries to the right side of the employee's body, including a broken right pinky finger, lacerations to the right arm, a broken right tibia, and five broken bones in the right foot.  The employee underwent surgery and was hospitalized.",1
An employee was hospitalized due to skin damage.,1
"An employee fell 8 feet through a hole on the flat roof after removing roofing material, fracturing his shoulder blades.",1
"On May 4, 2015, an employee suffered a partial finger amputation when his hand became pinched between two steel coils.",0
"An employee was cutting  a piece of scrap steel wire using a propane/oxygen torch. The wire was placed on top of a  scrapped hydraulic cylinder that contained a residual amount of hydraulic fluid.  While cutting the wire, the employee cut through the cylinder, igniting the hydraulic fluid. The flaming fluid spread to the employee's uniform, which also caught fire. The employee suffered second and third degree burns on his back, stomach, and right calf.",1
"Drilling pipe was being rolled off of a truck onto the rack. The pipe kicked back as it reached the bottom, catching an employee's right thumb between the pipe and the stack of pipes. The employee sustained an amputation to half of his thumb tip.",0
An employee was injured when he fell while climbing down an extension ladder.,1
"While an employee was grinding metal materials with a side grinder, the wheel of the grinder kicked back and lacerated his left arm.    ",1
An employee was transitioning from a suspended scaffold to a stair tower when he fell approximately 30 feet to the ground.,1
"An employee was using a vacuum in the cleaning line when he pressed the wrong button and allowed a pipe to roll past his station. He and a coworker tried to move it back up the line, unaware that another pipe was rolling forward. The employee's right-hand pinky finger got pinched between the two pipes and was later surgically amputated.",1
"A maintenance employee was working on a crystallizer. The guard was removed, but the machine was not locked out. He reached into the discharge valve to grab material; the machine cycled, and a small area of his thumb above and behind the nail was amputated.",0
"While a transporter machine was moving a 20'X20' of steel sheet metal, an employee got caught in a 3'X2' hole on the steel sheet metal, lacerating his right lower leg.",1
An employee injured his ankle when he missed a stair and fell while descending an extension ladder.,1
"An employee suffered hand and torso injuries when a pallet of rebar dowel being lifted by a forklift fell on the employee at 2801 North Joycee Lane in Sioux Falls, South Dakota.",1
"An employee received a crushing injury, resulting in an amputation on the right foot.",0
An employee was cleaning an Etnyre Maintenance Distributor when he was sprayed with hot tack coat. He suffered second degree burns on his torso and first degree burns on his arms.,1
"An employee reached beneath an energized conveyor for a label that was jammed. Her arm became entangled between a conveyor roller and the belt, resulting in a broken arm.",1
"An employee driving a tanker truck veered off the road and hit a fence, two telephone poles, and a tree. His truck was empty and going to another lease to load up when the accident occurred.",1
"An employee was placing 3/4"" conduit into a dumpster. While removing it, the conduit shifted and pinched the employee's right middle finger.",1
An employee in the machine shop was polishing an in-house die on a horizontal lathe when the employee's finger got caught on the chuck/die and was pulled in. The finger was dislocated.,1
An employee was cutting welding rod with a band saw when the rod ejected from the cutting surface and impaled the employee above the knee on the left leg.,1
"While using a material handling device, an employee did not realize that the lifting platform had not fully returned to the warehouse floor. The employee stepped off of the platform and fell approximately 30 inches, fracturing her right leg below the knee. The employee was hospitalized.",1
An employee was hospitalized after a forklift ran over the employee's right foot.,1
An employee developed an infection after having a sliver of metal in his hand.,1
An employee's hand became caught in in equipment injuring his index finger.,1
An employee's right-hand fingertip was severed from the nail down after coming in contact with an unguarded router bit.,1
"An employee was setting up a punch press machine and relocated the feeder from the front to the back. The press was not de-energized at the time. The employee hit the feeder command by accident, and the part charged out of the machine and sliced his left bicep.",1
"On May 5, 2015, at approximately 12:30 p.m., an employee stepped onto the side of the box machine to fill the glue pot with glue sticks. The employee's foot slipped off the surface of the machine, causing her to fall to the floor and fracture her hip.",1
"A motorized conveyor flipped over while unloading a trailer. The conveyor belt was stopped; when an employee tried to flip it back to its normal position, the conveyor started back up, pinching his finger between the belt and a roller and resulting in a partial amputation. Approximately 95 percent of his left ring fingernail was removed.",1
An employee was hospitalized with a hip fracture  after tripping over a material stop and falling to the ground.,1
"An employee was moving an aerial lift. He was attached via a lanyard when the aerial lift basket bounced, catapulting the employee. The employee was still in the basket after the accident occurred. He injured his left knee and fractured his left leg (left open fibula fracture). He was hospitalized.",1
"An employee was changing a tire on a backhoe when he was struck on the head, requiring hospitalization.",1
"An employee was carrying a load of steel coils with a crane. The load he was carrying hit a stack of coils in front of him. The coils fell on the employee, knocking him and the coils behind him to the ground.",1
"An employee slipped and fell out of the back of a Ford F800 truck, amputating the right index and middle finger as the employee attempted to grab onto a ring installed in the back of the truck.",1
An employee was hospitalized after suffering a laceration on the inner thigh when the RotoZip saw kicked back while dismantling a storage rack.,1
"A maintenance employee was disassembling a machine. The machine was locked out and the alignment pins were installed to hold the part in place.  After the last bolt was removed, the weight of the part sheared both pins and the part fell, striking the employee and breaking his ankle.",1
"On May 5, 2015, an employee fell 15 feet while creating a temporary work surface between two bridge beams with 16-inch long, 4x4 lumber.",1
An employee fell from the balcony when the guard rail fell.,1
An employee was using a jack to elevate a truck and change a spring. The jack slipped from under the truck and hit the employee's hand.,1
An employee was changing the top die on the 12-foot press when the die holder became loose. The ram and assembly dropped about 10 inches onto the employee's hands. He was hospitalized with a fractured right hand.,1
"An employee received flash fire burns while working on a non-functioning vaporizer at the 13-mile, full-service terminal vicinity in Williston, North Dakota.",1
"An employee was moving a large piece of glass. The glass shifted and fell back into him, cutting his arm. He was hospitalized.",1
"An employee suffered an amputation injury when a valve slipped and pinched the employee's finger between the valve and the frame of the truck at or near Micahlucas 2-5H in Dunn County, North Dakota.",0
"An employee was operating a pallet stacker when he placed his hand on a chain associated with the machine. His finger got caught in the chain; he pulled his hand away, amputating his right index fingertip.",0
An employee driving a jockey truck around the yard suffered a collapsed lung as a result of manually adjusting a side mirror.,1
"An employee suffered left leg and right ankle injuries when a pallet jack on a forklift fell against the employee at 707 Airport Road in Bismarck, North Dakota.",1
An employee sustained injures when his horse kicked him in the right side while dismounting at the cattle feedlot.,1
"An employee was using a carpet grabber to pull up the carpet. The machine slipped/kicked out, which caused employee to fall and fracture his right hip.",1
"An employee was performing routine activities, wrapping hydraulic hose from a bin onto a drum/spoil using a bin whip. The hose was being raised out of the bin onto the drum/spoil to be coiled evenly along the length when the bin whip broke free of the frame and struck the employee on his face and shoulder. He was hospitalized.",1
"An employee's foot got caught on a rack inside a trailer, dislocating his left big toe and requiring hospitalization.",1
"On 5/5/15, an employee was operating a bending machine when his right pinky finger got caught in the clamping mechanism. He sustained an amputation of the first pinky finger digit.",0
"An employee fueling a boat with gasoline heard a clicking noise near the battery compartment. While investigating, a flash vapor fire occurred, causing second degree burns to the employee's right and left forearms.",1
An employee was struck by a forklift while unloading material.,1
"An employee adjusting a skinner machine locked out the machine with a wrench and loosened a bolt. The wrench slipped off of the blade, causing her right index finger to contact the blade and remove skin.",0
"An employee had just finished giving a resident a shower. When she stepped out, she twisted her left ankle and fell. She was hospitalized and required surgery.",1
"Two employees were attempting to lubricate pinion gears on an overhead crane bridge drive. To prevent overspray, the first employee held a blue shop rag behind the pinion gear being lubricated.  The second employee sprayed the lubricant. The first employee asked the second to move the bridge forward using the crane pendent control, so he could lubricate the entire gear. The second employee inched the crane forward, at which time the blue shop rag and the first employee's finger got pinched between the pinion gear and the drive wheel.",0
"On 05/06/2015, at approximately 4:30 PM, an employee was loading a railcar with finished product using an overhead crane. He was adjusting the lifting attachment for the crane when the load shifted, causing the employee's left thumb to get caught and crushed. He was hospitalized.",1
"An employee was removing a baffle plate to set in the support arm with cable come a-longs. The employee's finger got pinched between the baffle plate and support arm, resulting in an amputation to the right ring fingertip.",0
"On May 6, 2015, an employee directing traffic in the receiving area was struck by a vehicle operated by another employee driving in the wrong direction down a one-way street.",1
"An employee was exposed to hydrocarbons while tank gauging at or near well site Charging Eagle 14-14-10 in Dunn County, North Dakota.",1
An employee climbed a fiberglass ladder to trim a tree. The employee told his coworkers below that he was not feeling well and was getting cramps. He had a rope and a strap along with his climbing belt. He had already put the rope around the limb of the tree. His coworkers told him to stop and come down. He stated that he could not move. One of his coworkers ascended the ladder to secure him from falling. They got him down and gave him some water. He got sick and was hospitalized.,1
An employee tripped over the arm of the dump truck and hit his head.,1
"An employee was inspecting property damage on a roof. He slipped and fell (unknown distance), injuring his right arm and head.",1
An employee cutting a tree branch fell and sustained a head injury.,1
An employee fell and sprained an ankle while stepping out of a Connex-style storage container.  The employee was hospitalized and required surgery.,1
"An employee was completing a lane closure on the off/on ramp. The employee was securing a mobile arrow-board when a third party struck a TMA vehicle that had caution lights flashing. The third-party vehicle lost control, went in front of the arrow-board, and struck it. The board then struck the employee on the leg.",1
"An employee was conducting radial ring maintenance on a tire-building machine. When the employee reached in to remove the ring, the ring moved and amputated the three middle fingers on his right hand.",0
"On 5/6/2015, an employee received chemical burns to his right thigh while he was transferring hydrofluoric acid from a 55-gallon drum to a 5-gallon portable container. He used a siphon pump to transfer the acid. The pump had an undetected cut in the hose, which caused the acid to spray on to the employee's leg. He was hospitalized.",1
"An employee was attempting to square up a 90-degree bend with a horizontal pipe using an overhead crane. The horizontal pipe slid off its supports towards the employee who used his hands to push the pipe away. The employee's left ring fingertip got pinched between the 90 and the horizontal pipe, amputating the fingertip.",0
An employee was making a sales call/visit to his customer when he slipped and fell down the stairs.  He was hospitalized with a dislocated knee and fractured femur.,1
An employee was opening the bay door when the door's roller came loose from one side and caused the bay door to shift. The bay door's glass window then shattered and impaled the employee in the chest.,1
"An employee was using a forklift to place a mold on a pallet. The injured employee was removing a 4""x4"" post from under the mold. The mold tipped, crushing the injured employee's left thumb.",0
An employee slipped and fell on urine when emptying the urinal in the toilet.  The urine splashed out onto the floor.,1
"An employee was injured during response to a boiler pipe breach/explosion, suffering burns to approximately 50 percent of the body.",1
An employee fell off of a 10-foot roof. The employee had used a ladder to access the roof and was applying caulking around the chimney. The employee fractured the left wrist and left ankle and was hospitalized.,1
"An employee in the steakhouse kitchen was using a mandolin slicer to slice a potato.  While using  the slicer, the employee amputated the tip of his right index finger (no bone).",0
An employee fell from an elevated work platform on a drill rig while installing piping for the well.  The employee broke both ankles. ,1
An employee was working from a scissor lift that fell. The employee sustained critical injuries and was hospitalized.,1
An employee working in a manhole was exposed to a cable falling off a rack.,1
An employee  attempted to close a gap on an angle by applying pressure with a chain. The chain he was using to pull the two pieces together slipped and struck him in the face. He was later hospitalized.,1
"An employee was exiting his semi-truck when he noticed a puddle of water outside the driver's side door. To avoid getting his feet wet, he stepped between the cab of the truck and the trailer to get to the passenger side.  He dismounted the truck from the passenger side and landed in an awkward position, breaking his right leg between the hip and the knee.",1
"An employee suffered a knee injury when he tripped through a doorway at or near 3815 116th Avenue SW in Dickinson, North Dakota.",1
"An employee was determing the generator when an arc flash occurred, causing severe burns to his face, neck, arms, and hands. The employee has been hospitalized.",1
An employee broke his right hip when he fell from his chair. He was hospitalized and required surgery.,1
An employee was struck on the head by a piece of a split rim when he was inflating a tire on a motor grader.,1
"On May 7, 2015, an employee was injured when attempting to align a two-part bucket with a hydraulic cylinder and block. The employee's left hand was crushed between the two bucket parts, sustaining fractures and requiring surgery.",1
"An employee was putting Brake-R chemical on a shelf above his head. The chemical fell from the shelf and the lid came off. Some of the product splashed him, causing chemical burns.",1
An employee was talking and then slumped over in his chair. He was hospitalized. The incident occurred on 15th floor at the gas control station.,1
An employee was working in the Oleo Process Unit and collapsed. He fell face forward and hit his face and head on the ground. He was hospitalized.,1
An employee experienced dizziness while mixing bone cement containing methyl methacrylate.  The employee was hospitalized due to a low heart rate.,1
An employee was entering the store while an individual was leaving the store with oil.  The individual did not pay for the oil. The employee tried to retrieve the oil and was dragged by the individual's car.,1
"An employee opened the rear door; a skid fell out and struck him in the legs, fracturing his left leg.",1
"An employee injured a thumb while clearing a clogged drill head, requiring hospitalization.",1
An employee fell 12 to 15 feet off of a fiberglass ladder while climbing to the emergency room roof to install roofing.,1
"An employee was standing in the hallway. A resident walking alone (non-assist resident) in the hallway lost her balance and fell into the employee, knocking her down. She fell and broke her pelvis.",1
An employee's hand was severed just above the knuckle while operating the hub press.,1
An employee was placing cardboard into the cardboard compactor chute while standing on a work platform with railings. The employee stepped through the railings to step on the cardboard and push it down further into the chute. The compactor was engaged at the time. The employee's leg got caught and became entangled in the moving cardboard. The employee suffered a broken leg and required hospitalization for surgery. The leg had to be amputated at the knee.,1
"An employee was fitting a piece of plate steel to the bottom of a barge when he slipped and fell, breaking his right leg.",1
An employee fell from a rack in the warehouse.,1
"On May 7, 2015, at approximately 6:15 a.m., an employee fractured his left hand and was hospitalized. The employee was securing a barge to a stationary cell near the river's edge. To tie the barge off to the cell, the employee pulled the ring away from the cell. His finger/hand got pinched between the barge and the ring, which was level with the barge.",1
An employee sustained an eye injury while operating a powered industrial truck.,1
"An employee was using a pneumatic staple gun to assemble a door unit. The employee hit a knot in the wood frame, causing the staple to fly back into the employee's eye. No eye protection was used at the time.",0
"On May 7, 2015, at approximately 11:00 a.m., an employee received first and second degree burns to his face, hands, left arm, and left leg, resulting in hospitalization.  The employee was troubleshooting an existing switchgear. The employee de-energized the equipment and thought it was safe to perform the work. The buss was still energized with 13,800 volts and an arc flash occurred.",1
An employee was buffing out a valve on a trailer with a buffer when a piece of metal dislodged from the buffing disc and flew under his safety glasses into his eye. He was hospitalized.,1
An employee was hospitalized after tripping over a mobile jack stand not in use in the tool room. The employee sustained a leg injury.,1
"An employee was running a deflashing machine. The main auger of the machine registered a fault. The employee cleared the alarm and vacuumed out the media. He reached into the auger to clear the media by hand. The machine was running at the time. His right hand made contact with the moving auger, resulting in a partial amputation of his middle finger.",0
"The corner tip of an employee's left index finger was cut while cutting pork with a band saw. The guard was down above the pork bone. The blade then struck the pork bone. The pork moved away from the blade, and the employee's fingertip made contact with the blade.",0
An employee suffered a nasal fracture on 5/8/15 after being hit on the nose by a baseball. He was hospitalized.,1
"An employee was operating a fuel-loop maintenance truck. While fueling a bulldozer, he stepped over the fuel hose with his left foot. His right foot twisted and broke at the ankle.",1
"An employee was lifting aluminum stock weighing 15 to 20 pounds. During this activity, the employee aggravated a pre-existing hernia condition in the lower left groin, requiring hospitalization and surgery to repair the hernia.",1
"An employee's back was injured while lifting a waste basket, requiring hospitalization.",1
An employee's abdomen got caught between a cement hopper and a stationary object at the West Lining building. He was hospitalized.,1
An employee was burned when he opened a pressure fryer before all the pressure was relieved. The equipment safety device to prevent the lid from opening before all pressure was released malfunctioned at the time of the incident.,1
"On 05/08/2015, at approximately 7:10 a.m., an employee was stripping an MC Wire when he made contact with the live wire and received burns to both hands. He was hospitalized overnight.",1
"An employee in the restroom lost her balance and tripped over her pant leg, falling and hitting her head on the wall. She dented her head and required hospitalization.",1
"An employee was removing a lift (Genie AWP-36S) from inside the church (main aisle, towards back of the church). The employee was lowering the lift when another employee heard a ""snap"" noise. The lift started to fall. The employee moved away to avoid being hit; in the process, he fell backwards, hit his head, and lost consciousness.",1
"An employee was getting out of a front-end loader when he missed the step and fell to the ground, fracturing his pelvis. He was hospitalized and required surgery.",1
"An employee was using a forklift to load a pipe rack onto a third party's truck. After the pipe rack was placed, he got out of the forklift to help strap down the pipe rack. The pipe rack fell off of the truck onto his lower legs.",1
"An employee was trying to separate a piece of angle iron on the pipe rack with his hands. He separated one side of the angle iron from the other two pieces. He was walking next to the pipe rack to get to the other side when the pipe rack collapsed and landed on him, breaking his leg.",1
"An employee was measuring a form at the manufacturing plant, FMB building. He was standing on the form, approximately 3 feet off the ground. As he stepped back, he lost his balance and fell backwards, landing on his back on the concrete floor.",1
An employee fell while moving a chair.,1
"Two employees were filling a mixer with ingredients. They were each pouring over magnets from two locations on the same mixer. The first employee picked up his magnet and walked past the second magnet as they prepared to close the mixer. As the second employee closed the mixer doors, the two magnets were attracted together. The first employee's fingers got pinched between them. The injury resulted in amputation of two of his fingertips on 5/11/15.",0
An employee was digging with a shovel when the shovel hit his ankle. He received a hairline fracture on his ankle.,1
"The first employee was using a backhoe to dig a 12"" to 18"" trench for the drill slurry, so the slurry water could be pumped away while concrete was being poured. The second employee instructed the first to pull forward so he could dig the pit for the pump head. The first employee put the backhoe in drive, but it lurched forward because it was still throttled up. The first employee tried to pull the shifter down into neutral, but it went all the way down into reverse. It backed up quickly, striking the second employee in the knee.",1
"An employee was cleaning a concrete mixer when the mixer's blade pinched the employee's finger. The employee sustained a partial finger amputation and compound finger fracture on the right-hand, third finger. The mixer was not locked out at the time.",0
"An employee working on a flat roof fell approximately 12 feet, injuring his back and requiring hospitalization.",1
"An employee was resting his left hand on the edge of a roll-over fixture as he used a 2.5-pound ""dead-blow hammer"" with his right hand to level a cylinder head on the fixture in the salvage drill bed. When he raised the hammer, it struck something above and deflected down onto his left middle finger.  He sustained a partial fingertip amputation, losing his fingernail and fleshy fingertip; there was no bone damage.",0
An employee was preparing to climb down a ladder and fell.,1
An employee was changing the door liners of the Bucher holding mixer when a press started closing the gate on his left forearm. He sustained bruising and swelling on his forearm. The gate valve was locked out at the time of the incident.,1
"On May 8, 2015, an employee was putting an additional bend into a double torsion spring at a large servio table (wire bender) machine. He put his left hand on top of the part, and his left finger got caught between the bending mechanism (steel block) and the stationary block. He suffered a left ring finger amputation.",0
"On May 8, 2015, an employee sustained multiple broken bones when cleaning cell 18 in the molding department.  The employee was pinned by the robot against a fixed component; the cell's robot was not locked out during cleaning operations.",1
"An employee's hand got caught in a door, resulting in a right index fingertip amputation.",0
An employee was injured from tripping while walking up a flight of stairs.,1
"An employee processing manure attempted to adjust a conveyor belt. The belt was in motion at the time. As he lifted the latch to lock it into place, the bracket bar spun 180 degrees and struck the employee in the lower leg.",1
"An employee loading trucks walked from one trailer to a second trailer on the loading dock and did not notice that the second trailer had been moved from that location. He fell off of the loading dock and landed on the ground below, receiving injuries to his right collar bone and pelvis and requiring hospitalization.",1
"An employee was delivering cargo at a local Dollar Tree store, assisted by store employees, when he collapsed. His body temperature was 108 F, possible heat stroke.",1
An employee was seriously injured after hitting the third digit on his right hand with a hammer. The employee suffered soft tissue trauma.,0
An employee working in the office area tripped near a desk and landed on their face.  The employee was hospitalized with a cervical injury.,1
An employee was hospitalized due to an injury sustained from falling off a ladder.,1
"An employee was changing the battery on a forklift when the battery slipped and crushed his thumb, fracturing and lacerating it.",1
An employee was headed to a meeting in the conference room. She fell as she opened the break room door to cross over to the conference room.,1
"An employee was walking behind a forklift operator. The forklift operator struck the employee, knocked him down, and ran over his foot.",1
An employee was attempting to fix an air/oiler on an air tank under an asphalt silo. The safety gate released and hit the employee in the head.,1
"An employee was using an oxy-torch to cut a scrap metal drum in half. The scrap metal drum was 13 feet long and 10 feet high and was lying on the ground horizontally during the work process. The employee came across a small piece on the side of the drum; when he went to cut it with the torch, he fell forward, falling 5 to 6 feet onto his face. He received facial contusions and cuts from metal shavings that were on the work floor during the cutting process. The employee received in-patient hospital care for his injuries.",1
"On May 9, 2015, at approximately 10:00 a.m., a maintenance employee was hospitalized after receiving fractures to his left hand. He was injured when he reached into an access panel for the 1951 freight elevator to operate a manual override due to the outer set of doors not opening.  The elevator moved, and his hand got caught between the elevator and shaft.",1
"An employee was performing maintenance on a communications antenna. He was trying to connect a harness to the ladder, but the shackle was hard to open. His arm gave way and he slipped, falling 30 feet.",1
"On May 9, 2015, an employee was operating a Raymond stand-up forklift when the forklift hit a protective rack on the top and caught the arms of the counter leaver.  The aluminum extrusions bundle weighing 1,000 pounds came down and struck the employee. He was hospitalized with injuries to his right arm and ribs.",1
"An employee fell from a two-story roof, sustaining back and neck injuries.",1
An employee was trying to attach a deep fat fryer basket holder/bracket onto a fryer when her left hand slipped into the fryer grease while the fryer was turned on.,1
An employee working on a production line in the Parbake Plant amputated three fingertips on his left hand while trying to unjam equipment.,0
"An employee was rolling a piece of metal that got crooked going into the roll machine. The employee attempted to straighten the piece when the roller caught the employee's glove. The roller has an ""E"" stop and an emergency cable. The employee hit the cable and the rollers stopped.  A coworker hit reverse, and the employee's hand was freed from the machine. The left index finger was crushed, requiring hospitalization; the finger did not break and there were no permanent injuries.",1
"An employee was punching holes and stacking a floor stringer. The packaging process was to flip every other piece onto the previous piece using the overhead crane. The employee tried to increase production by flipping the parts by hand instead of using the crane. One piece fell on his finger, stripping the flesh and nail from his fingertip and leaving the bone.",0
An employee on a ladder was attempting to reset the breaker inside of a disconnect panel when the flashlight the employee was holding hit something and sparked. The employee was thrown to the ground and required hospitalization.,1
"On May 10, 2015, an employee amputated his left index fingertip while at the workstation.",0
"An employee was being harassed by a coworker. The coworker picked up a product and threw it at the employee, striking his right cheek. He required stitches.",1
"An employee was attempting to set an extension ladder on a house when it started to fall. He was unable to catch the ladder, and his right pinky finger got caught in a pinch point.",0
An employee was injured when caught between an order-picker powered industrial truck and a storage rack. She received multiple fractures in her back and was hospitalized.,1
An employee was bitten while restraining a cat and was hospitalized for infection.,1
An employee was emptying a fryer and spilled hot cooking oil on the legs of a second employee. The second employee was hospitalized.,1
An employee was shot in the leg during an armed robbery (not fatal).,1
"An employee dismounted an airboat to retrieve his lunch box. When he attempted to climb back onto the airboat, he was struck by the fan blade. He sustained broken ribs and a collapsed lung.",1
An employee fell while running down steps and broke his leg. He was hospitalized overnight.,1
An employee severed his left little fingertip while clearing a wooden block from a horizontal drilling machine.,0
"An employee delivering and removing skids was injured while unloading 12-inch clamps from the flatbed of the truck. The clamps got caught on the employee's clothing and pulled him off of the truck, injuring his lower back.",1
"An employee was standing on a trailer to load equipment when he fell off of the trailer. A grouting mixing unit then fell on top of him, causing injuries.",1
An employee's foot came off the pallet jack platform and got caught between the platform of the pallet jack and the product.,1
"On 05/04/15, an employee stepped on a screw, which punctured the employee's boot and foot. The employee was later hospitalized for surgery.",1
"An employee was dismounting the cab of a crane when he fell on the deck barge, injuring his right wrist and right hip.",1
"On or about May 11, 2015, at approximately 7:00 a.m., an employee  fell from a flatbed truck while applying a tarp to it. The employee incurred head and facial injuries and was hospitalized.",1
An employee sustained a left ring finger amputation while adjusting a guide roller on the case packer machine.,1
An employee fell from a ladder on 5/11/15 and broke an ankle. The ladder was not set up correctly at the time of the incident.,1
"Two employees were adjusting forks on a forklift before lifting a load of building materials at a distribution warehouse. While attempting to spread the forks apart, one of the forks fell off of the tracks. Because the fork was no longer seated in the tracks, it fell to the ground, striking one of the employees. The employee sustained a broken leg (fibula) approximately 2 to 3 inches above his right ankle and five broken toes on his left foot.",1
An employee working at the register collapsed and was admitted to the hospital and treated for dehydration.,1
"An employee was walking toward the medication room when her foot got stuck on the floor, causing her to lose her balance. She fell forward and injured head and face on the doorway. She also fractured her left arm.",1
"An employee tripped and fell while walking down a hallway, fracturing her elbow.",1
An employee's finger was partially amputated on a bus fan belt. The bus driver started the bus while the employee was checking fluid levels.,1
"While entering the right of way, an employee operating a tractor lost sight of the ground where there was a slope; when he turned the wheels to the right, the tractor tipped over. The employee remained in the cab and received multiple fractures.",1
"An employee turned his back on a live high-voltage line as he was uncovering an electrical power he was about to work on, causing burns to his neck and right thigh. He was hospitalized.",1
"On May 11, 2015, an employee in the carpenter shop was using a jointer to remove a 2x4 wood plank. The employee's left-hand ring fingertip was amputated when the wood kicked back and the employee's hand touched the jointer.",0
"A forklift dropped a load on an employees right hand, smashing it. The employee was hospitalized and had surgery on his right thumb.",1
"An employee attempted to reset forks on a PIT using a second PIT. The fork slipped, catching and lacerating the employee's hands. The employee was hospitalized for hand surgery.",1
"A kiln cart struck an employee, breaking the employee's tibia and fibula bones when the employee's leg got caught between the moving cart and a stationary object. The employee was hospitalized and received emergency surgery.",1
An employee had approximately 8mm of both thumbs amputated while operating a press brake at Jemison Demsey Metals.,1
An employee was installing a control display on a commercial oven in the Kroger deli when he was shocked by an unknown voltage; he was hospitalized.,1
"On 05/11/2015, at approximately 12:55 a.m., an employee was loading a bin in the loadout area. He was monitoring the material being filled into the bag of litter pellets when the loader dropped some product on the floor. He moved out of the way, stepped on some pellets, slipped, and fell down on the concrete floor. He got up and walked around, but later felt some pain and was hospitalized.",1
"At 3:45 a.m., an employee was injured after stepping into an approximately 11-inch conveyor gap and being struck by a stack (300 to 500 pounds) of veneer boards. The employee was hospitalized.",1
An employee was getting into the LLV when he/she closed the door on and amputated the right index fingertip (no bone loss).,0
"An employee was taking flange coil to the beam line on a coil car. When he stepped off the coil car, he did not remove his hand from the control button. The coil car kept moving, ran over his right foot, and severed all five of his appendages.",0
"While exiting the roof, an employee unhooked his fall arrest system. He slipped and fell approximately 12 feet onto the lower roof.",1
An employee slipped on the step of the tractor trailer delivery truck and struck his right knee on the step. He was hospitalized for surgery.,1
An employee working from home fell and broke her leg while getting up out of a chair. She was hospitalized and required surgery.,1
"An employee was filling a sandblast pot with more media. As he stepped away from it, the hose fitting decoupled, leaving his right leg in line with blasting media discharge. The discharge caused an abrasion in the right curved area of his right leg.",1
An employee broke his leg tripping over light-pole foundation footing while trying to run out of the way of a falling security fence.,1
"An employee was looking down and reading while walking. She tripped on materials and fell on the right side of her body, fracturing her hip.",1
"An employee received a minor burn on the arm while performing hot work in a CHT septic tank. Later, the employee developed a severe infection in the arm and received treatments including drainage and antibiotics.",1
"An employee was on a loader step to take out a ticket from the loader operator. He lost his balance when he was stepping down and hit the frame of the loader, injuring his neck.",1
An employee's left-hand little and ring fingertips/pads were amputated when the employee's hand got caught between a 500-pound steel calibration weight and a conveyor frame during a maintenance activity.,0
An employee was setting up a video presentation and tripped and fell. He broke his leg in four places and was hospitalized.,1
"An employee using a 4-foot A-frame ladder fell while reaching to dust. She broke her arm, requiring hospitalization and surgery.",1
An employee was performing a butt weld on two metal rods. He lined up the metal rods in the clamp and did not pull his hand out of the way when the clamp took hold and the butt weld was activated. His left index finger was partially degloved and amputated.,0
"An employee was separating a crane that weighed approximately 1 ton and was about 15 feet long from a carriage. The carriage fell on the employee after it was unbolted, resulting in fractures and other injuries.",1
"While removing a fiberglass-reinforced column mold, an employee's left ring finger got pinched between the mold and the spinner, resulting in a left finger amputation.",1
"On or about May 12, 2015, an employee was operating a standup reach truck under the direct supervision of a Hubbell, Inc., manager. While driving backwards, he lost control of the vehicle; the ""dead man"" pedal/switch was not engaged. The employee tried to jump off the moving vehicle, and his left foot got caught between the side of the vehicle and an I-beam. He sustained severe injuries to his foot and was hospitalized.",1
"An employee missed a step while exiting the building and tripped and fell. The employee sustained an ankle sprain/dislocation, requiring surgery and hospitalization.",1
"On or about May 12, 2015, an employee was operating a skid steer vehicle and had his right foot resting on the edge of the operator cab. His foot slipped off and was caught in the pinch point between the bucket assembly and the cab. He fractured his foot and ankle and was hospitalized.",1
An employee sustained an amputation of his upper fingertip while operating a press.,1
"An employee was working on a brake caliper bolt that was stuck on the brakes of a school bus. The employee applied force to the ratchet, which freed the bolt and caused the employee to fall, roll, and break his right ankle. He was hospitalized and required surgery.",1
"An employee suffered an amputation injury while cutting lumber at or near 3350 West Main Avenue in Fargo, North Dakota.",0
An employee pulling wire felt a strange pain in his belly. He was hospitalized to determine the source of the severe pain.,1
"An employee was standing near a baler machine. A coworker bumped the baler with a forklift, causing the baler door to fall off and hit the employee on the foot.",1
"An employee operating an alfalfa bagging machine fell into the machine's hopper. The hopper's paddle wheels struck the employee, lacerating the employee's stomach and breaking the employee's arm and leg (unknown side).",1
An employee fell to the ground at work and injured her wrist.,1
"An employee was changing the fuel filter on an all-terrain skid loader. The skid loader was turned on while the gear was engaged, causing the unit to roll over and crush the employee's legs.",1
"An employee was cleaning around a drain in the area where milk cartons are placed on a conveyor belt. The employee reached in around the conveyor's chain-and-sprocket drive, which pulled and partially amputated the employee's right thumb between the sprocket and chain.",0
"On May 12, 2015, an employee's lower left leg was burned by a space heater while sitting at their desk.",1
"While being lifted by a derrick air hoist during oil well drilling operations, an employee's steel-toe boot got caught under the steel cross member ""girt"" of the derrick. The toe was amputated inside the boot.",0
An employee reached into a Ward die cutter machine while it was IES to set it up. The employee degloved three fingers on his right hand.,1
An employee fell approximately 13 feet through a roof working surface while preforming a roof replacement project.,1
Employees were exposed to caught-between hazards while cleaning the patty-maker machine in the grinding room of the meat department due to lack of training on lock-out/tag-out procedures.,0
"An employee was helping to unload a hopper from a forklift to a truck. The employee had his hand next to the hopper when it moved backwards and pinched his finger, amputating his left middle finger.",0
"An employee was operating hydraulic equipment, a directional bore machine, when he thought there was a leak. He moved the hose to check if there was a leak. He placed his hand on it and was injected by oil into his left middle finger.",1
An employee was working in a dark storage area of the cast iron building using a utility knife to open a box. The knife skipped out of the cut and sliced the employee's wrist.,1
"On May 12, 2015, an employee's left wrist was punctured by tooling on a molding machine when the machine cycled with his hand in the point of operation. He was hospitalized.",0
An employee fell 8 feet from a 10-foot step ladder while installing an acoustical ceiling grid.,1
"On May 12, 2015, an employee was injured while changing the guillotine blade on the paper machine. The blade fell on his right leg, mid-thigh, resulting in overnight hospitalization.",1
"An employee standing on top of a box beam slipped and fell onto a platform approximately 5 feet below him, breaking his leg.",1
An employee collapsed while filing and struck their head when they fell to the ground.,1
"An employee feeding the F-Line feeder reached into the luthi packer portion of the machine while it was still running to clear meat that was jammed. The employee's hand was cut by a knife inside the machine, partially amputating the right index fingertip.",0
An employee received burns resulting in an overnight hospitalization.,1
"On May 13, 2015, an employee performing glass beading caught the upper portion of his right thumb between a roller and the part, resulting in medical amputation.",0
"An employee was assembling oilfield parts. He had a small piece of pipe (approximately 3-feet high) and was attaching another piece (approximately 500 lbs. with an 18"" diameter) to the upright stationary pipe. As he lowered the piece with an overhead crane, he began to place the piece inside the stationary pipe and bolt them together. The pipe was disconnected from the crane, and the employee noticed that the bolt holes were not lined up. When he began to reposition the pipe, it slipped and amputated his pinky, ring, and middle fingers on his left hand. He was hospitalized.",0
"An employee tripped over the scanner cord she was using and fell to the ground, resulting in pain in her right shoulder and hospitalization.",1
An employee fell and broke her left ankle in two places while descending stairs that traversed a conveyor.,1
"On May 13, 2015, at approximately 12:00 midnight, an employee suffered a concussion and was hospitalized after being struck by a 1.5- to 2-inch flex steel hose. The employee was working in the cellar while a rig hand worked on the rig floor 30 feet above. The rig hand disconnected the hydraulic hose, which fell 30 feet and struck the employee in the head.",1
"An employee was on a 10-foot step-ladder installing some piping in a new structure. The ladder started to ""walk"" and began to kick out. The employee reached up to the pipes to steady himself, but then fell and broke his wrist.",1
An employee was decorating a cake stationed on a stainless steel table. The employee was standing on a rubber mat (fatigue mat) when she tripped on it. She fell and fractured her left hip.,1
An employee delivering mail was bitten by a dog and was injured.,1
An employee was cleaning a meat slicer and did not realize that the machine blade was spinning. She amputated her middle and ring fingertips on her right hand.,0
"A forklift operator backed up and struck a pallet jack and load directly behind with the forks of the truck, pinching the injured employee's left big toe and causing a 1/2-inch toe amputation.",0
An employee was clamping down an insulated metal panel with an air-actuated jig while his hand rested on the plate. The jig severed his right-hand middle fingertip.,0
"An employee was walking into the truck when another team member raised the manual dock plate. The employee walking tripped and fell into it, causing him to fall on his hand. The employee's hand got caught in the dock plate, severing the middle, ring, and pinky fingertips on his left hand.",0
An employee was bitten by an insect and had a swollen leg. He was hospitalized to cut/drain the bite area.,1
"An employee was on an 18-foot extension ladder. While looking to see if the concrete was poured over the rebar, he fell 8 feet to the ground with the ladder, breaking both of his forearms. He was hospitalized.",1
An employee was helping coworkers lift the side of a large HVAC unit. His right middle fingertip got caught under the HVAC unit as it was being lowered to the ground.,0
"A dump truck from another company, broke down in front of the plant, and employees helped to pull it into the yard with a front end loader. The dump truck had a broken V joint. The injured employee kicked the drive shaft back towards the center of the truck while the vehicle was in motion, and the truck's back axle ran over the employee's legs and feet.",1
"An employee talking on a cell phone stepped onto a wooden pallet. Her foot got caught on the pallet, causing her to fall to the ground. She was hospitalized and required surgery for a fractured hip.",1
An employee was getting ready to get into his delivery truck when he bent over to pick up an air bag and sustained a back injury. He was hospitalized.,1
"An employee operating the roll machine inadvertently put his hand in the roller, which rolled him into the machine and broke his left arm, ribs, and hand.",1
"At approximately 8 a.m. on 05/13/15, an employee calibrating the blade pitch in a primary air fan. The fan was tagged out at the time. She rotated the fan blades by hand while wearing gloves. As she pulled down on a blade with her right hand, the blade caught the glove or fingertip of her left hand, which was resting on the flange. Her left pinky got pinched between the fan blade and fan housing, amputating the finger about 1 cm from the tip.",0
"An employee fell while descending steps in front of the post office to collect mail, fracturing her right ankle and requiring hospitalization.",1
Employees were trying to maneuver a metal pipe into place using a hoist when the swivel released and caused the pipe to suddenly lift up about 6 inches and strike the injured employee in the jaw.,1
"On May 13, 2015, at approximately 1:00 a.m., an employee suffered a back injury resulting in hospitalization.  The employee was making an over-the-road delivery driving a tractor trailer.  He stopped at a Pilot Fuel Station and was exiting the cab of his tractor trailer when he stepped to the ground and felt a sharp pain in his back.",1
"An employee changing a ""barrel"" on an extruder machine received a crushing injury to his right index finger. Part of the finger was surgically removed due to the extent of the injury.",0
An employee suffered a hand injury and was hospitalized when a pressure washer inadvertently operated.,1
"An employee was torqueing a crossover and putting on tubing with a 36-inch pipe wrench. The hydraulic lever lost power. When the employee started troubleshooting the equipment, the wrench swung back and hit the employee in the chest.",1
An employee was feeding material into a Dado saw when the left and middle ring fingers were amputated.,0
"An employee was operating a table saw when his left index finger came in contact with the rotating blade, cutting his index finger to the bone.",1
"A maintenance employee was changing an apartment window screen. As he started to climb down the ladder, the ladder slipped. The latch was not attached to the ladder rung at the time of the incident.",1
"At approximately 1:00 p.m., on 05/13/15, an employee was preparing to perform cleanout operations to change chemical products on a production line. The employee, who was by herself at the time, got stuck and pulled into an energized Horix Filling Machine. Coworkers arrived after hearing her scream, pressed the stop button on the Horix Filling Machine to shut it down, and used a tool to manually back up the machine belt. The employee was extracted from the machine by her coworkers. She suffered multiple injuries to her right arm and hand, including a 6"" laceration (to the bone) on her forearm, a severe laceration to her upper arm, a fracture or break of her wrist or forearm, and a possible right thumb amputation. She was hospitalized.",1
"While loading a desk on a box truck, an employee fell off the back and broke his nose, requiring hospitalization.",1
An employee was cutting a 2x4 piece of wood with a table saw when it came down on his finger.  He cut his left index finger on the left side.,1
"An employee was cutting pork on a meat cutting bandsaw in the meat department of the store. While he was cutting the pork, he looked up and cut his right ring fingertip and fractured his middle finger. The bandsaw had a guard in place at the time of the incident.",1
An employee fell from a scaffold rack while unloading scaffolding material from a flatbed truck and sustained a broken wrist and head bump.,1
An employee turned the wrong way while operating a standup forklift.  He stepped off of the forklift and wedged his foot between the forklift and pallet. He was hospitalized overnight.,1
An employee was doing landscaping work when she fell off of a ladder and injured two vertebrae and three ribs.,1
"An employee was side loading an ATV onto a one-ton flatbed truck.  When loading the employee felt the wheels slip, hit the gas and subsequently traveled across the bed of the truck and hit the 4"" bump rail.  The ATV flipped and propelled the employee over the handle bars and to the ground and the ATV fell on the employee.",1
"An employee tripped over a box and hit his head on a crate, causing a cut that required hospitalization and six stitches.",1
"An employee was inspecting pipe threads on a production line. A set of stops were removed for single-pipe roll down. After manually moving a pipe, another pipe came into contact with the employee's hand. His hand got caught and crushed between both pipes, resulting in an amputation from the tip to the first joint of his right-hand pinky finger.",0
"In the bindery division, an employee had a partial amputation of his right pinky finger from the bottom knuckle up. The employee was working on the autostacker, which cuts paper product, when the amputation occurred at 11:00 PM on 5/14/15.",0
"On May 14, 2015, an employee was riding a horse at the farm when the horse got scared and threw the rider. While falling, the employee got hit in the face by the horse's foot, injuring his face. He fractured his eye socket and facial bones and was hospitalized.",1
An employee was in the maintenance shop picking up parts when he lost consciousness; he was found on the floor by a coworker.,1
An employee received amputation-type injuries.,0
"On 5/14/15, at approximately 2:20 p.m., an employee was moving a box of tile off a forklift. The box fell and caught the employee's right ring finger between the box and the pallet, amputating the ring finger of his right hand.",0
"An employee was cleaning the rollers of a Walco glue applicator and applying cellophane when his sleeve got caught. The machine pulled his right arm into the rollers, causing a degloving injury to the skin on his wrist and shoulder.",1
"An employee stood up from a chair to go turn off his machine. He lost his balance and fell, landing on his right side and fracturing his right hip. He was hospitalized.",1
"An employee was inspecting the attic to verify if workers could access the windows for cleaning. While doing so, he fell approximately 13 feet through the sheetrock ceiling, landing on the floor below.",1
An employee broke the left forearm while trying to stop a moving van.,1
An employee was stocking in the freezer when a case of soda fell on her head,1
An employee was placing plastic bags into a bailer when a forklift truck crushed his left leg.,1
An employee jumped approximately 8 feet from an aluminum extension ladder while loosening bolts from a metal plate.,1
"An employee's left distal thumb got pinched between a table and a wheel while moving trees in compartment #3. The employee sustained a near amputation of a left distal thumb fracture, complex 5-centimeter laceration, complex nail bed repair, and exposed bone.",1
"A maintenance employee was working on a lathe in the machine shop. He needed to remove a rust spot on the shaft after beveling it.  Wearing gloves, he began removing the rust by placing a small piece of sand paper over the area as the shaft turned on the lathe (polishing). The glove got caught in the rotating shaft, which pulled the employee into the machine and amputated his left pinky finger, broke his left arm, and stretched his wrist tendons.  He was hospitalized and underwent surgery.",0
"An employee was washing windows while standing on a 4-foot stepladder. When she stepped back off of the ladder, she twisted and broke her left ankle, requiring surgery and hospitalization.",1
"An employee was carrying a 12-lb box up the stairs when the box began to slip out of his hand.  He tried to catch it and missed a step. He lost his balance and fell down eight stairs, landing on his left leg.",1
"An employee was putting lumber into the edger. More lumber was placed on the edger than the edger could handle, causing a piece to kick back and make contact with his thigh, breaking the leg.",1
An employee was run over while strapping down his load.,1
"An employee was injured while stretching aluminum with a coworker. The coworker bumped the metal, pushing the aluminum back and causing it to pinch the employee's left index finger.",1
"On or about May 14, 2015, an employee was walking down a residence hall near the dining area when she slipped and fell due to water left on the floor. She fractured her left knee and required hospitalization.",1
An employee's left ring fingertip was amputated when it made contact with a moving sprocket while changing a belt on an exhaust fan.,0
"An employee was cutting lumber to size using a swing saw in the pallet shed. The saw blade caught his right glove as it passed and pulled his right arm underneath, amputating his right hand at or above the wrist. He required surgery to amputate his right arm 3 inches below the elbow and was hospitalized.",1
"An employee was disassembling a wire-line tool when a section of the tooling fell onto the employee's hand. The employee sustained deep lacerations to four fingers and small fractures to two fingers, requiring hospitalization.",1
An employee fell approximately 10 to 12 feet while pulling parts from a storage rack located outside; the employee was hospitalized and sustained multiple fractures.,1
"A crane hook broke, causing its load to fall from the crane onto an employee. The employee's head was pinned between the load and a dump truck.",1
"On 5-14-2015, at 8:00 AM, an employee picked up a snake inside of a building and was bitten on the right thumb. She was hospitalized.",1
An employee walking out of a paint booth tripped while taking off his paint coat.  He broke his right femur.,1
An employee was using a hand-grinder to remove a burr on a receiver hitch when the grinder wheel broke apart and sent a piece of the wheel into the left side of the employee's knee.,1
Employee slipped and fell on a wet wooden access ramp at a residential home while delivering mail.,1
"An employee was trying to install two fasteners that hold a dashboard instrument panel onto a firewall. The employee was wearing gloves; a finger on the glove got caught between the socket and the fastener, pulling the employee's finger into the socket and amputating it at the base.",1
"At approximately 8:40 a.m. on Friday, 05/15/2015, an employee sustained a broken right arm after falling from a tipping scaffold to the concrete floor.",1
"An employee was tightening a valve flange under a cargo tank but could not get the valve flange to tighten. The cargo tank contained methanol under pressure. He decided to remove the valve to let vapors out. He was using a cordless drill, which ignited the vapors. The vapors caused second degree burns to his right arm and the back of both legs.",1
An employee fell from a hole in steel decking and broke bones. The employee was hospitalized.,1
"Three employees were operating a crane on the jobsite. They were getting ready to take some spouting and needed more length on the sling, so they had to remove the jib. The person on the crane platform was attempting to remove the jib and could not get it. Another employee came to help take the pin out.  Once they removed the pin, the jib fell on the employee who was trying to remove the pin, breaking his right leg.",1
A light-duty pickup truck struck and ran over an employee from behind. The employee was  struck in the hip and fell to the ground; the truck's rear wheel ran over the employee's knee. The employee was hospitalized.,1
"An employee was mowing a bank horizontally using a John Deere zero-turn commercial riding mower. The mower flipped onto the employee, puncturing a lung and breaking three left ribs, five right ribs, and the clavicle.",1
"An employee poured water into the concrete mixer and the water splashed into his eyes. Moments later, the employee extended his hand to pick up the bucket when he instead felt a tick on the tip of his left middle finger. His finger got nipped by the concrete mixer paddles. No amputation occurred.",1
"An employee was pushing a plastic bin containing ice to a banquet area when the bin tipped, causing the employee to lose their balance. As the employee fell, the bin fell on top of the employee's hand, amputating the fingertip between the floor and the bin. The employee was hospitalized.",0
"An employee was performing work in a 24-volt DC electrical cabinet. While working, a loose wire grounded out and arced; the employee received an electrical shock and his left hand sustained a second degree burn.",1
"An employee's hand was caught in a tray pack machine, resulting in a finger amputation.",1
"On May 15, 2015, at approximately 8:30 a.m., an employee was hospitalized after inhaling smoke from an electrical fire at the Switchgear No. 7 Substation. Before the incident, mechanical technicians working at the oil recovery plant heard an explosion and noticed a fire at the substation.",1
"An employee was in the loading bay counting beer that was to be delivered. He turned around and slipped off the open bay door, falling backwards and hitting his head on the concrete below. The fall was approximately 3 feet. The employee lost consciousness and was hospitalized.",1
"On 5/18/2015, an employee was attempting to change fuses on a control panel for the blast (steel shot cleaning machine). An arc flash occurred and injured both of the employee's hands, requiring hospitalization.",1
An employee was pushing a cart containing parts when her heel caught on something. She fell on her left hip and required surgery.,1
"An employee was reversing a forklift in the freezer area. He believed he was going to hit the storage rack, so he jumped off and got caught between a pallet and the forklift.",1
An employee sustained a back injury during a patient lift.,1
"An employee was hashing parcels when he tripped on a tub and fell on the concrete floor, fracturing his right hip. He required hospitalization and surgery.",1
An employee's left arm got pinned in a machine at the beginning of their shift. The employee was hospitalized.,1
"On May 15, 2015, an employee walked through an area being mopped, slipped, and fell. She injured her knee, requiring surgery and overnight hospitalization.",1
"An employee was greasing the wheel lift on a tow truck when his hand slipped, causing the lift to fall and crush his left middle fingertip, which eventually had to be amputated.",0
An employee operating a gang saw attempted to clear a jam.  His right hand got crushed between two pieces of wood.,1
"An employee was loading wheel sets onto his flatbed truck trailer when one of them started to roll. The wheel struck him and caused him to fall off the trailer, resulting in a broken hip that required hospitalization.",1
"On 5/15/15, an employee was hospitalized after suffering a laceration to the left pinky finger. The employee was conducting maintenance activities at the time.",1
"On May 15, 2015, an employee picked up an approximately 20-pound box of oil, sat it back down, and experienced pain in his left arm and back. He later found out he pulled a muscle and had a collapsed lung.",1
"On or about May 15, 2015, an employee was injured when struck by a forklift that was backing up.",1
"An employee's arm got caught in conveyor belt guide rollers while troubleshooting the equipment, resulting in hospitalization.",1
"Two employees were installing plastic on a strainer basket inside of a reactor 30' high when the basket slipped and pulled in one employee's glove and middle finger. Approximately 1/4"" of the employee's left middle fingertip was amputated. The basket is made of steel and is shaped like a small garbage can measuring 2' x 1.5' and weighing 200 pounds.",0
"On or about May 15, 2015, at approximately 8:00 a.m., an employee was trying to troubleshoot a hopper that was not filling properly. She took the cap off of the hopper and pulled back on an air cylinder.  The air cylinder was on a timer; it actuated as she pulled on it and caught her left ring finger in the movement, amputating the fingertip.",0
"An employee stepped over a pallet (used to store warehouse equipment) on the warehouse floor to retrieve some carpet squares. He picked up the carpet squares and stepped backwards to go back over the pallet. After doing so, he lost his balance and caught his toe on the pallet, which caused him to trip and fall. He landed on his knee and face, suffering an unspecified knee injury and a concussion. He was hospitalized.",1
"An employee was exposed to and came into contact with approximately 46,000 volts of electrical current from a downed power line, resulting in third degree electrical burns.",1
An employee was using a compound miter saw when the saw came in contact with his left hand.,1
"An employee was cleaning the construction site when a concrete company's cage broke.  The concrete forms inside the cage then fell on the employee, who was hospitalized.",1
An employee was working in inedible rendering when she went to open a valve for production flow to the birds.  The steam ball valve was either in the open position or steam pressure was still in the line which caused the product flow line to be under pressure. The pressure caused the back feed which overflowed the tallow tank and hot tallow sprayed onto the employees upper left back and right arm and hand resulting in second degree burns.,1
An employee servicing engines on a 777 aircraft was turning around to go down a Lift-A-Loft ladder when he lost his balance and fell approximately 7 feet to the ground.,1
"An employee was removing a hose from an asphalt truck. When the employee unhooked the hose, the oil remaining in the hose splashed back onto the employee's left arm, causing chemical burns. He was hospitalized.",1
"On May 16, 2015, at approximately 9:15 p.m., a maintenance employee suffered an amputation of the left pinky finger just below the nailbed. The employee was using a Porta power pump and ram to remove a bearing from the end of a roll when the employee's finger got smashed between the ram and bearing. The pump was running at the time of the incident.",0
"On or about May 16, 2015, an employee operating a mobile pallet jack crushed his big toe between the curb and the pallet jack. The toe was amputated at the hospital.",0
"An employee was operating a tension leveling machine, which was running a coil of copper through it at a speed of approximately 200 fpm. The employee was at the delivery end of the machine near the payoff reel when he reached into the moving machine. The machine grabbed the glove on his left hand, pulled his left arm into the machine, and rotated him around five times. He was wrapped inside the copper coil from his left hand to his armpit and was severely injured.",1
"An employee was using a ladder to take a nitrogen purge line off of a unit that was being decommissioned. He lost his balance on the ladder and fell backwards onto his backside. This is not the fall that caused the injury, but was a precursory fall. He gathered himself and headed back toward the control unit when he then tripped over his feet and landed on an approximately 12-inch high dike on his right side, causing the injury. He was hospitalized for a fractured pelvis.",1
"An employee was using a sling attached to a crane to remove a wheel housing from a dyno tester.  His thumb got caught between the sling and wheel housing, amputating his thumb at the distal joint.",1
An employee was handling a cable that runs between a drum and the spud. He was trying to put slack in the cable line when the spud shifted and caused the cable to tighten. The cable struck and fractured his left leg just above the ankle.,1
"An employee was sanding a golf cart belt with sand paper while the golf cart was running. The belt caught his fingers and pulled them into the system, amputating his left-hand middle and index fingertips.",0
"Around 1:30 AM on Saturday, May 16, 2015, an employee who had been washing accumulated spilled lime near an area utility drain stepped into dry lime, which came up over and into his ~10-inch tall steel-toed work boots. He received third degree chemical burns to his feet and lower legs and was hospitalized.",1
An employee was injured when struck by and pinned between the counterweight of a forklift and the ship's hatch/deck pontoons that were resting on the dock.,1
"An employee carrying a bucket of water stopped short when cut off by a customer. The water spilled onto the floor, causing the employee to slip, fall, and fracture the left leg.",1
"An employee suffered an amputation injury while rigging up a top drive at or near Parshall, North Dakota.",0
A forklift driver turned off his forklift and dismounted it. The forklift was still coasting and not fully stopped at the time. His left leg got pinned between the forklift and a wine table.,1
"An employee was washing and servicing a bus. When he started to exit the bus, he turned his right ankle and fell to the ground, fracturing his right ankle and left lower leg.  He was hospitalized.",1
"An employee was carrying a bucket of hot asphalt.  He lost his balance and sat the bucket down, which caused the asphalt to splash on him.  The employee was hospitalized with burns.",1
"An employee entered the back of a semi-trainer to prep for loading. There were approximately five 8' x 10' x 1""-thick sheets of plywood used as dunnage on the previous load that were left on the trailer and needed to be removed. They were stacked on end and secured to the wall of the trailer.  The employee untied them in order to move them.  The dunnage fell on and injured the employee.",1
"An employee was working in the tail section of a G4 jet. He was climbing down a ladder when he slipped. To stop his fall, he grabbed something on the ladder, which cut his finger.",0
"A forklift operator was moving a plastic returnable (3ftX3ftX2in) on the forks of a forklift. The employee was attempting to place the returnable in a cart that has the same dimensions as the returnable base. While attempting to set the returnable on the cart he had difficulty aligning the returnable with the cart.  The cart has casters so it moves around. The employee decided he would go around to the side of the returnable in an attempt to align it with the cart. While backing up he placed his right hand on the outside of the roll bar of the forklift. While doing so he twisted his body in order to look over his right shoulder. As he was backing up, he hit a center column to the building to which a steel sign was attached and protruding. That protruding steel sign severed the middle and ring fingers of his right hand. The signs had been placed on the columns throughout the workplace as a warning for employees to stop before crossing the drive aisle.",1
"An employee fell through a hatch on a cargo vessel, breaking the left wrist and left foot and requiring hospitalization.",1
An employee severed the right-hand index fingertip while cleaning a mixer used for batter at a food concession. The mixer was still plugged into an electrical outlet and was turned on at the time of the incident. The fingertip was severed when it got caught in the shaft.,1
An employee was cleaning a mixer in the sink while still plugged into an electrical outlet.  The mixer was turned on and the tip of her right index finger was severed when it was caught in the shaft.,1
"On or about May 18, 2015, an employee became light-headed and ""sick"" after likely suffering from dehydration on the jobsite. The employee was hospitalized.",1
"An employee was operating a (smaller) press brake machine. She placed her finger between the outside of the part and bottom outside face of the die (not in point of operation). While holding the part, she activated the press to finish the bend. The part moved downward and pinched the tip of her finger. This caused a non-bone amputation of the fingertip.",0
An employee was on a head platform attached to the top of a 200 foot tall elevator guiding a new conveyor belt into the elevator from the top. The belt was inserted about 3/4 of the way when the belt broke and fell on two employees on the platform knocking the employee to the floor of the platform and fracturing his right hip. The second employee received stitches and was released.,1
"An employee was operating a stack truck (PIT). He turned the truck in the wrong direction and struck a metal guardrail post. He had stuck his foot out of the truck before striking the post, and his foot was crushed between the truck and the post.",1
An employee was reaching into the back of a truck to move boxes when he felt a pop in his back. The pain got progressively worse throughout the day. He was later admitted to the hospital for numbness in the leg.,1
"An employee was working on pressurized pipe.  When he attempted to loosen a pipe to turn a 90-degree angle, the cap on the pipe dislodged and blew into his abdomen.",1
"An employee was chasing down fuel lines in order to decommission an oil cleaning rig. As he was doing so, he began stepping backwards toward an open side panel which had been used to access the trailer. He stepped out of the trailer and fell backwards approximately 49 inches onto the shop floor. He suffered severe head injuries and was hospitalized.",1
An employee's right thumb was punctured by fencing material when erecting a fence on the ranch property.  The employee began to experience abdominal stomach cramps days later and was admitted to the hospital. Diagnosis may be related to the employee's thumb injury.,1
"An employee was manually transporting a truck body onto a transfer table. As he was setting it down, he pinched his finger between the truck body and the transfer table, sustaining an avulsion to the pinky finger.",0
"An employee was attempting to remove a sewer cover using clamps with his right hand.  He reached under the cap when there was enough room to fit his hand, and the sewer cap fell on his left middle finger.  The finger was amputated between the nail bed and the first knuckle",0
An employee was bitten by a spider. Two to three days later the bite swelled up and the employee was admitted to the hospital for IV antibiotics.,1
"On 5/18/15, an employee was hospitalized after suffering a laceration to the left hand. The employee was conducting maintenance activities on a pallet conveyor.",1
An employee suffered an amputation injury while aligning a telescope cylinder with a boom lift.,0
"An employee suffered a finger injury while drilling a blade at or near 101 Sunrise Ridge Road in Brookings, South Dakota.",1
An employee was using a forklift to transport cardboard from the rear of the building to a storage area. He did not see a structural pole in his path of travel due to a blind spot created by the forklift mast. He struck the pole and was ejected from the forklift. He was not wearing his seatbelt. His head struck the mast of the forklift as he was ejected. He was hospitalized.,1
An employee received a partial (1/4-inch) amputation to her left middle finger. She was adjusting a wait on top of the Prodo Pak filling machine when her finger got caught in a pinch point and her fingertip was severed.,0
An employee severely injured the index and middle fingers on the left hand when caught in a mixer before it had stopped. The middle finger was amputated at the most distant knuckle.,1
An employee was walking up an outside stairwell when he twisted and injured his knee.  He was hospitalized and had surgery.,1
"An employee was using a chop saw to cut a 2"" x 6"" wedge when two left-hand fingers were amputated.",1
"An employee was standing on a fixed metal ladder at the pivot point on an irrigation system while using an electrical tester to determine if power was getting to the junction box. He incurred injuries from an electrical shock, which caused him to fall off the ladder. He also received head injuries from the fall.",1
"An employee was walking in the plant and collided with another employee and fell to the floor. The employee suffered two separated vertebrae, six broken ribs, a collapsed lung, and a broken right arm.",1
"The employee was preparing to dismantle scaffolding the employer had erected in the north stairwell of the building.  The employee stepped onto a scaffold platform and the walkboard gave way.  The employee fell 3-4 feet.  On the way down, the index and middle fingers of the employee's right hand were injured. The tip of the middle finger was amputated and the tip of the index finger was cut such that the tip was barely attached to the finger. The flesh of the index finger could not be saved and had to be amputated (no bone involvement).",0
An employee was injured while cleaning a surgical table when he stood up and struck his head. He was hospitalized.,1
"While working with heifers in front of the feed bunk, an employee did not see the feed truck backing up. The driver also did not see her, and she was knocked down under the truck.",1
"An employee amputated the tip of his left index finger, during the closing of a hydraulic tailgate, while unloading material.",0
"An employee was operating a foil stamp machine when a paper misfeed occurred. The employee reached into the machine to grab it, and his right index finger became caught, resulting in hospitalization. The tip of his finger was severed at the nail.",1
"While clearing a paper jam in the embossing section, an employee caught a hand between two rollers.",1
An employee collapsed while working at a construction site as a flagger. He was hospitalized for a stroke.,1
"An employee was injured when he fell/slipped while performing clean up/janitorial services. He was cleaning equipment with a dough scraper, water bucket, and towel. He was attempting to retrieve a tool when he slipped and fell, pinning his right arm under his body and breaking his right arm.",1
An employee sliced off their fingertip while operating a meat slicer.,0
An employee fell approximately 3 feet from a step-ladder and fractured a rib.,1
"While cleaning parts in a parts washer, an employee's foot slipped in a hot solution of water and detergent (180 Degrees).",1
"An employee was loading oil into the gun barrel while on a ladder. The gun barrel caught fire possibly from the electric heating element and ignited the employee's FR clothes. The employee received second degree burns on his forearm, his hand, and behind his ear.",1
An employee experienced an electrical shock while unplugging a camper.,1
"An employee was trying to help guide a load by grabbing onto a tag line. He tripped over the stands made out of wood that were holding the extension cords off the ground and landed on his left arm, causing a fracture.",1
"An employee was troubleshooting on one of the lines when he decided to place an AVIS strap around an idler roll to reduce its speed. His left index finger became entangled in the AVIS strap, resulting in an amputation to his left index fingertip and bone, which was severed at the middle phalanx.",0
An employee fell out the side of an 18 wheeler box trailer and hit his head on the concrete floor.,1
An employee caught his hand between a road-plate and dunnage.,1
An employee fell about 8 feet from a ladder and fractured his skull. He was hospitalized.,1
"An employee got his finger caught between the pallet racking and the freeze dryer cart as he guided the cart towards the freeze dryer with a motorized pallet jack. The cart became stuck at the dryer, and he tried to push it into the racking system. His right pinky finger got caught and was partially amputated.",0
"An employee was washing the concrete truck after a delivery while standing on the rear fender. He fell 46 inches to the ground below, cracking his ribs and sustaining a possible lung laceration.",1
"A hydraulic cylinder fell, landing on the employee's right thumb, resulting in the amputation of the right thumb fingertip.",0
"On or about May 19, 2015, an employee was cleaning a moving roller on an extrusion machine with a rag when the machine pulled his left hand in. His left-hand index finger was injured.",1
"An employee tripped and fell while stepping off of a palletizer, resulting in a dislocated right shoulder with fracture.",1
An employee fell while dismantling a scaffolding bridge.,1
"An employee fell from a 15 foot roof surface opening while removing material as part of asbestos remediation. The employee was wearing a personal fall arrest system that initially engaged then failed, causing the employee to strike the concrete pad beneath him.",1
An employee was struck on the head by falling tent support.,1
"An employee was walking on uneven terrain, slipped on loose gravel, and fractured his ankle. The employee was hospitalized.",1
"An employee was performing a quality assurance inspection of can-line valves.  While inspecting the double head tail filters, she placed her finger in the fill nozzle. The valve energized, closed on her right middle finger, and pinched off her fingertip.",1
An employee caught her left hand in the fiber picker machine. The machine was not guarded at the time of the incident.,1
An employee was nailing 2x4's together with a nail gun. He had several lined up on a table and was ailing them to make 4x4's when he shot a nail through his right middle finger.,1
"An employee was in the picking area staging totes that were in stacks of 15 to 20, with each tote weighing approximately 1 pound. When she reached for the tote, it fell on top of her; she fell back and hit  the floor. She was hospitalized.",1
"An employee was walking in to work for the night shift at around 1400hrs and fell breaking the tibia and fibula of the right leg. The employee has been hospitalized. The employee doesn't recall exactly what happened, but believes that when stepping up onto a curb, a foot slipped off the curb resulting in the fall.",1
Employees were loading a metal keg onto a truck when the strap slipped and struck the employee on the left big toe. The employee was hospitalized for surgery.,1
An employee was operating turn-table #1 and mold #2 when the mold carriage latch amputated the right index finger and broke the right hand.,0
"An employee ""rolled"" her left ankle while walking down the stairwell. The incident resulted in a fracture of the ankle that required inpatient care.",1
An employee injured his ankle when he lost balance rolling a dolly down a truck ramp.  The incident resulted in a broken ankle requiring hospitalization.,1
"On or about 05/19/2015, a utility crew was pulling two sections of a utility pole together with come-a-longs. Each section of the pole has rigging plates attached. One of the rigging plates broke loose and struck the employee on the back resulting in a ruptured spleen that required inpatient care and surgery.",1
"An employee was working with another crane operator to move a crane. The employee had taken in the outriggers on his side and was moving one of the pads to a designated spot on the crane. He was walking around to the other side of the crane where the other operator was still putting the outriggers up. He slipped in the muddy conditions and put his left hand out to catch himself. His hand landed on the outrigger being brought in, crushing his ring and middle finger resulting in the amputation of both fingers.",0
"Two employees were moving a hijack to the fourth floor when the stairway gave way/broke, causing the employees and the equipment to fall. They were between the third and fourth floors when it snapped. The injured employee landed on the second floor landing or a little bit below. The second employee was not injured.",1
"On May 19, 2015, at approximately 11:00am, an employee was hospitalized after being struck in the head by a 3 inch rubber air hose fitting.  The employee was operating a drill rig at the time of the incident.  A hose under 300 pounds pressure, broke at the fitting (swivel came off the threads) allowing the hose to whip and strike the employee in the back of the head.  The employee fell 5' from a platform resulting in a fractured skull.",1
"An employee fell from a height, fracturing his left and right ankles and left arm. He was hospitalized.",1
"An employee was working on a CNC router with a coworker. The coworker activated the router, and the employee got caught between the table and the machine frame. The employee was standing on a safety mat that failed at the time of the accident.",1
"An employee suffered a hand injury while performing routine maintenance on a pump jack at or near Pierre Creek Nelson 44-23 HR in McKenzie County, North Dakota.",1
"An employee was replacing a belt on a conveyor when a coworker energized the conveyor. The employee's hand got caught between the drive chain and the sprocket, amputating the first and second fingers of the right hand down to the first knuckle.",1
"An employee had a seizure and fell to the floor, hitting and lacerating his head. He was hospitalized on May 19, 2015.",1
"An employee operating an assembly machine got her finger caught between two clamps when the machine cycled on its own, receiving a near amputation injury.",0
An employee slipped and fractured an ankle while mowing grass.,1
"On or about  May 19, 2015, an employee exiting a roof onto a ladder was impaled in the back of the knee by a lightning rod.",1
An employee was hospitalized with an infection due to a foot injury suffered on a jobsite a few weeks prior.,1
An employee had two fingers on the right hand caught between a push arm and a board at the drop sort.,1
"An employee was descending a ladder when his hammer came loose from his tool belt, striking a shot strip that was lying on the floor. One of the unused shots detonated in the shot strip, causing a metal fragment to strike the employee's right arm.",1
"An employee was working on an air handler-AC2DF return fan. He shut it off and was waiting for the air handler to stop. While it was still moving, he sneezed and his hand got caught in the belt. His left-hand fingertip was severed, requiring surgery.",1
"On May 19, 2015,an employee was carrying money from the safe room. She pushed back the steel door of the safe room with her left hand. The third (ring) finger of her left had was pinched between the door frame and the closing door. The finger tip was amputated.",0
"An employee was walking on stilts (raised up about 3 feet), installing batt insulation in the ceiling (about 8-feet high) with a manual staple hammer. The stilts caught a piece of plastic insulation bundle wrapping, causing the employee to lose his balance on the stilts. He tipped forward on the stilts, striking the floor with his knees. His coworkers offered to help him back up, but they couldn't move him. He was hospitalized with a fractured spine.",1
"An employee fell through a hole in the floor to the decking 14 feet below, breaking both wrists.",1
An employee suffered a right ring finger amputation while operating a lathe in the manufacturing department.,1
"An employee was driving an RC lift truck towards the drinking water fountain to get a drink of water. As he approached the water fountain, he did not brake in time, so he used his left foot to stop the RC lift truck. His foot got pinned between the RC lift truck and the bollard that surrounded the water fountain. He was hospitalized for surgery on his lacerated left foot.",1
"An employee was attaching shipping steel to a radiant panel. While lining up the shipping steel, the steel got in a bind and sliced off the employee's left index fingertip, including bone. The employee required surgery.",0
"An employee burned his right foot while transferring hot roof tar from one container to another.  The receptacle into which he was pouring broke, causing some tar to spill onto his foot and burning him.",1
"An employee was drilling holes in a beam when the coolant stopped spraying properly. He climbed onto the CNC drilling machine to adjust the coolant. The knob to control the coolant was located above the vertical drill. As the employee made the adjustment, the CNC drill cycled and pulled the employee's left lower leg between the beam and rollers. He was hospitalized for treatment of a compound fracture.",1
An employee walking backwards in a semi trailer fell out of the trailer and hit the ground. The employee suffered a concussion and was hospitalized.,1
An employee was performing a rip cut on a table saw when he cut his left thumb approximately 1/2 inch above his knuckle but below the nail. The guard was not in place at the time.,0
"An employee was working on a mount machine when the employee's left-hand ring finger was amputated, requiring hospitalization.",1
"An employee was removing a cash drawer from the safe. Her right hand was on top of the safe; when the safe door was shut, it took the top portion of her right middle finger off.",0
An employee was adjusting settings on a surface printer and caught his left index finger in between two gears resulting in the amputation of a fingertip.,0
An employee working in the storage yard was using an extension ladder while stacking the fourth concrete panel. He fell 15 to 20 feet to the ground and fractured his right femur in two places.,1
An employee sustained a partial right thumb amputation while operating a metal filing band in the building's work area.,1
An employee injured his back in a patient's apartment when he picked up a bucket of water used to mop the floor from the sink.,1
An employee had the tip of his finger amputated while operating the slicer machine.,0
An employee dislocated their left-hand pinky finger. The employee was hospitalized and required surgery to repair torn tendons.,1
"While digging pits under the foundation of the building, a piece of concrete fell and struck two employees. One employee was treated and released with a hand injury; the second employee was hospitalized with a chest injury.",1
An employee injured his wrists while uploading a trailer truck and driving a powered industrial truck.,1
An employee fell while coming down the steps of a platform.,1
An employee was operating a U.S. Postal Service vehicle when the employee was involved and injured in a motor vehicle crash.,1
An employee was pushing a cart that contained grinder parts. The cart tipped and the grinder bit fell off the cart and struck the employee's left foot. He was hospitalized as a result.,1
An employee was delivering parts when he complained of chest and arm pain. The employee was hospitalized.,1
An employee fell off of a truck and fractured their arm.,1
"A Noble Energy employee was injured by a compressor fire at a company location in rural Northeast Weld County, Colorado. The employee was hospitalized.",1
An employee at a site location was helping to empty a tip hopper of glass into a truck bed. The employee's right thumb got caught between the hopper and the truck bed. The employee suffered an amputation to the right thumb tip.,0
"An employee was using an A-frame ladder to clean gutters around a building. The employee fell off the ladder, injuring his/her hip.",1
"An employee was preparing paint in the stern thruster room of a vessel tied up to the pier. He had to kneel and crawl on steel surfaces. He wore knee pads, but not all of the time. His left knee became sore, and he was diagnosed with bursitis with a possible infection.",1
"An employee was operating a foot-actuated punch press when a piece of metal got stuck. While attempting to remove the metal, the hole punch actuated and amputated the employee's left index fingertip and thumb tip.",0
"An employee reversing a powered industrial truck (PIT) out-traveled the dock edge, causing the left rear wheel to drop approximately 3 inches to the lower surface. The PIT overturned and landed on its side. He was wearing his seatbelt at the of the time of the incident but removed it during the fall. The employee suffered a right ankle fracture and was hospitalized for surgery.",1
A tractor ran over and broke an employee's foot while he was loading the tractor onto a truck transporter.,1
An employee was using the baler compactor and he manually closed the gate on his right ring finger. The injury resulted in a partial amputation of the right ring finger up to the first knuckle.,0
"An employee was cleaning up hot pulp that had spilled on the floor (approximately 6-inches deep).   The employee's rubber boots became stuck in the pulp. As he tried freeing himself, his left foot came out of his boot. His unprotected foot landed in the pulp, causing second degree burns up to his ankle.",1
"An employee was climbing a 6' stationary ladder in order to unjam a line. He was approximately 6' high when he reached for and missed the handrail. He then lost his balance and fell backwards to the floor, hitting his arm on a conveyer and landing on his backside and knee. He complained of a sore arm and was hospitalized for surgery to the injured arm.",1
An employee fell approximately 8 feet when the duct work he was working from fell to the floor. Fall protection was not worn at the time of the incident.,1
An employee fell and broke an ankle moving a five-gallon bucket.,1
"An employee was attempting to separate two 3/8"" carbon plates using a plate hook. The plate hook became caught and the employee's finger was caught with a block while attempting to move the plate hook. His finger was amputated above the last knuckle.",0
"An employee backed a POV up to the school to unload tools and lumber; the POV was on an incline.   When the employee exited the POV, it began to roll. The engine was running and the brake was not applied at the time. The employee attempted to re-enter and stop the POV, but fell on the ground, breaking the left wrist and sustaining contusions to the left side of the head.",1
"A truck driver was arranging a pallet.  He stood on the pallet jack to reach the top of the pallet and fell, injuring his ribs and head.  He was hospitalized after the incident.",1
An employee refueling equipment on a truck fell from the truck and hit his/her head.,1
"An employee finished installing the ridge cap on a roof and had removed the fall protection anchors. He stepped back onto the ladder to exit the roof and lost his footing, falling approximately 20 feet. He required surgery for a broken hip and ribs.",1
"An employee was changing out a gasket on the discharge side of the power boiler feed water pump.  Hot water (200+ degrees) released from the pipe and burned the employee's shoulder, chest, and stomach, requiring hospitalization.",1
An employee fell from a truck while delivering product to a school.,1
An employee broke his arm when it became caught in a conveyor roller.,1
"An employee was using a pressure washer to clean the floor. He stopped to talk to his supervisor and placed the nozzle on his right foot. He accidentally squeezed the trigger on his foot, releasing 250-degree Fahrenheit water onto his foot.",1
"An employee was building crates with a pneumatic nail gun. The wood he was nailing split and the nail gun slipped, moving the nail gun to his hand. He shot his hand with the nail gun, requiring hospitalization. The safety pad was in place at the time.",1
An employee was inspecting seats inside an aircraft that was parked inside a hanger. He bent or knelt and felt a pop in his lower back followed by pain. He pulled a muscle and was eventually hospitalized to treat the pain.,1
"On May 21, 2015, at approximately 9:30 AM, an employee and coworker were using a forklift and floor jack to remove a hydraulic drive motor from the distribution buggy for repairs. The motor slipped from the floor jack and crushed the employee's thumb, requiring hospitalization and surgery.",1
"On or about May 21, 2015, at approximately 1:15 a.m., an employee was injured when a 4,000-pound cart carrying a helicopter transmission rolled over the employee's foot. The employee sustained a deep laceration, resulting in stitches, and a few fractured toes.",1
An employee suffered a crushing/amputation injury to the right little finger while working on the coil conveyor line in the packaging department.,0
"An employee slipped/tripped and fell in the concrete parking lot while running to his automobile in the rain at an administrative building. The employee severely strained his right hamstring and sustained an abrasion on his right knee, as well as abrasions on the palms of both hands.",1
"A crew worked doing line clearance tree trimming.  An employee not involved in the tree felling operation stood 35 feet from a cherry tree to be felled.  Employees working from bucket trucks limbed the cherry tree to a height of 18 feet.  Then, an employee manually felled the cherry tree.  The cherry tree had a small limb that remained on the back side.  When the employee felling the cherry tree made the back cut and the cherry tree fell, the remaining limb on the cherry tree struck a nearby ash tree.  The ash tree stood 40 feet high.  Because the ash tree was dead, it became uprooted when struck by the falling cherry tree.  When the ash tree fell, it struck the employee standing 35 feet away from the cherry tree.  This employee suffered a dislocated hip, contusions, and a possible concussion.  The employee was hospitalized for his injuries.",1
An employee was hospitalized after the skid steer loader he was working on rolled over his feet.,1
"A bag of ice on a pallet in the walk-in freezer had a tear, and some of its ice cubes fell onto the floor. An employee went into the walk-in freezer to get product and stepped onto one of the ice cubes, causing the employee to slip, fall, and break the right hip.",1
An employee checking bulk tankers on a trailer platform fell approximately 3 feet while stepping down. The employee was hospitalized with a fractured tibia and fibula and a dislocated ankle.,1
"An employee was cleaning out the floor scrubber using a water hose. He went to turn off the fountain and slipped, injuring his left hip.",1
An employee placed her hand between the door and door frame and pinched her left pinky finger. Her fingertip was crushed.,1
"On 5/21/15, an employee was using a panel cutting machine. When he changed the length of the panel, his hand got caught by the blade, amputating three fingers.",0
"An employee was working in the mold department with the mixing machine. While the employee was pushing the mixing machine, his hand slipped into the mixer. His left index, middle, and ring fingers were amputated.",0
An employee was setting up on block one when his left-hand middle and ring fingers got crushed by a cylinder.,1
"An employee removing a brush guard got their finger caught between the vehicle chassis and brush guard, amputating the left index fingertip.",0
"An employee was lowering a fire hose off of the side of a ship using a rope when the rope became tangled around his index finger, amputating it at the first knuckle. The employee was hospitalized.",1
An employee operating a forklift turned to back up and his arm went numb. The employee was hospitalized overnight.,1
An employee was moving backwards with a loaded pallet jack when he tripped and fell back on his hip area. The injury led to a pelvic fracture and hospitalization.,1
"An employee was operating an ammunition loading machine. One cartridge did not have a bullet seated in the opening, so he reached into the opening to remove the faulty cartridge. His finger got caught by the transfer bar (feeding mechanism).",0
An employee was tying off pipes in a partial trench when the trench buried the employee's leg. The employee was hospitalized.,1
"On May 21, 2015, at approximately 3:00 p.m., an employee was running the milling machine when his glove got caught in the milling cutter, amputating his right index finger.",0
An employee slipped and fell on chicken grease while cleaning up a rotisserie chicken that a customer accidently dropped on the floor.,1
"An employee was cleaning an auger on a production line. He suffered a finger amputation when he reached into the 8-inch auger, which came down on his finger.",0
An employee was webbing up and feeding paper into a commercial offset web press. He used his right hand to unjam some paper when his hand and fingers got caught and pinched between the blanket cylinders of the press.,1
"An employee was feeding paper into a conveyer belt to be shredded. He saw some paper under the belt and reached for it. His glove became caught in the conveyer belt, which pulled his left hand and forearm over and under the rollers, resulting in a crushing injury. He was hospitalized.",1
An employee on the north end of the veneer-cutting area was cutting 80-inch by 5.5-inch veneer on a table saw. The employee grabbed the cut from the front of the table saw while it was running. The blade caught the glove on the employee's left index finger and amputated the finger at or near the first knuckle. All guards were in place at the time.,0
An employee was cutting grass on the north side of Interstate 75 where the ground sloped. The riding mower started to slide; the employee removed his seat belt to get off of the mower. He slipped and his right leg got caught under the mower.,1
"On May 21, 2015, an employee slipped and fell and was hospitalized with a fractured hip.",1
An employee being trained on pallet-jack operation crashed against pallets.,1
"An employee was in the restroom on the morning of 05/22/2015. After washing her hands, she reached for the paper towel dispenser, and then slipped on the floor as a result of water droplets.  She fell backwards and landed on her right arm fracturing her humerus.",1
An employee's leg was pinned by elevator doors.,1
"On or about May 22, 2015, an employee was cleaning with a sweeper and tripped over the cord and fell. The employee broke a bone in the left arm between the elbow and the wrist and hurt a hip.",1
"A wooden pallet got stuck on a roller conveyor.  The employee hooked a chain onto the pallet and the other end onto the mast of a forklift.  As the employee hooked the chain onto the mast of the forklift, the forklift operator side shifted the forklift mast, causing the employee's finger to get pinched between the hook on the chain and the forklift mast.  The employee suffered a fingertip amputation of his right index finger.",0
An employee smashed the middle two fingers of the left hand while connecting two beams.,1
An employee had three fingers amputated after reaching into a machine through an unguarded opening.,1
"An employee fell while pulling a tarp over a pit, breaking his hip and requiring hospitalization.",1
An millwright working on a fan in the feed house suffered an amputation of his left pinky finger while rolling a fan belt back onto a pulley.,1
An employee was working outside at the rear of the facility. A forklift operator was emptying a load of boxes into the trash compactor and struck the employee on the side of her head just below the ear. The employee sustained a fracture to the bone below the ear. It is unknown if the forks or the boxes struck the employee.,1
An employee was working on a mobile conveyor system when his thumb got caught and injured.,0
"On May 22, 2015, a contractor had removed the stairs from a job trailer in order to install skirting around the trailer.  An employee, who had not heard the warning of the contractor, exited the trailer and fell 40 inches to the gravel below.  The employee fractured his right leg and was transported to a local hospital.",1
An employee was clearing the bottom of an underpinning excavation when the ceiling collapsed and he became pinned under a large granite rock from the old foundation they were underpinning.  The employee was hospitalized and received surgery to repair broken bones in his back.,1
An employee suffered an amputation of two fingers on the right hand when a concrete truck lurched backwards crushing the employee's fingers between the delivery chute and an adjacent wall.,0
An employee working from a ladder to put up bird netting fell 15 feet to the ground below and broke a wrist and cracked the pelvis.  The employee was hospitalized overnight and had surgery on the wrist the following day.,1
"Employee tripped over a fixed safety cable while working on a roof, resulting in a dislocated ankle which required in-patient hospitalization and surgery.",1
An employee was hospitalized after a sliver from a wire brush punctured his finger and the wound became infected and needed surgery.,1
Employee was stowing a wheelchair in the bus when she got her finger caught in a pinch point amputating the tip of the right index finger.,0
"An employee was setting trusses on the second floor. A truss shifted causing the employee to lose balance and fall approximately 25 feet to the floor. The employee was hospitalized with a broken arm and head, nose and left hand injuries.",1
An employee was injured when working on a conveyor.,0
An employee was on a wooden structural wall pouring concrete when the machine started to malfunction. He jumped from the wall and broke a leg.,1
An employee experienced a fingertip amputation while working on a piece of machinery.,0
An operator was instructing a new employee how to operate the hydro blasting machine when it suddenly actuated. The operator suffered injuries to the hand and was admitted to the local hospital for surgery.,1
An employee fell at the end of her work shift while descending a set of wooden stairs fracturing her right tibia and requiring surgery to repair.,1
"The employee was in the mezzanine pulling tires for a vehicle that was being serviced.  While walking to the mezzanine stairs, he stepped inside of a tire.  As he raised his foot to walk, his heel got caught causing him to lose balance.  He landed on his right knee.  The employee felt he could continue working and did not request medical attention.  He worked the remainder of his shift.  Three weeks later the employee was admitted to the hospital for an infection to the injured knee.",1
An employee was working on an A/C unit when the blade struck his right hand little finger.,1
An employee was rolling a piece of steel in a roller and caught his right pinky finger in the roller. The fingertip was amputated.,0
On 5/22/2015 the injured worker tripped over rebar lying on a pallet and fell breaking his leg above the ankle. The break required surgery to repair.,1
An employee was climbing over a pallet of product when he got his foot caught and fell off the pallet breaking his knee cap.,1
An employee broke an arm while attempting to assist a box of product along the conveyor belt.,1
An employee was coming out of a portable restroom (Port-O-John) when a forklift truck struck and fractured the employee's right leg. The employee was hospitalized.,1
"An employee was cleaning an actuator valve for an R&D project. He activated the valve, which opened it. When he then deactivated the valve, he did not remove his finger, and the valve caught his fingertip. He pulled his finger away, removing the pinky fingertip skin on his left hand.",0
An employee was unloading empty drums from a trailer when he stepped off of a pallet and broke his leg.,1
"On Friday 05/22/15 in the afternoon, an employee was cleaning an empty apartment while wearing rubber gloves. There was a break in the gloves and dirty water from a bucket contacted a pre-existing wound on the right hand causing injury such as, swelling, redness and pain to the hand.  He was transported to the hospital for treatment.",1
An employee received a severe laceration on left thumb while operating a cutting saw. The accident occurred on 5/23/2015 at 11:45am.  The employee was hospitalized.,1
An employee was pushing a cart with steel louvers on the cart. The steel louvers slipped off and crushed the big toe on his left foot.,1
An employee was moving a cement head that weighs approximately 400 lbs when it fell onto the employee's left foot.,1
"On May 24, 2015, an employee was removing a battery from a Crown Lift Truck with the help of a second employee. During the removal, the battery slipped and fell onto the injured employee's right hand crushing multiple fingers and amputating the right index fingertip.",0
"On May 24, 2015, an employee working near a mud pump suffered an injury to his right leg/knee when he was struck by fluid under pressure when a hose ruptured.",1
An employee received a burn to the right forearm due to contact with an electrical power line while operating an articulating boom truck.,1
While exiting a room an employee slipped on a tray that was left by the door causing her to fall and break her right arm.,1
An employee working on a ship was installing a valve into a pipeline.  The employee slipped and a toe was caught between the valve and pipeline.,1
An employee was shot in the abdomen during an attempted robbery.,1
An employee was lifting a bag from the baggage carousel onto the baggage cart when the employee felt a sharp pain in his abdomen.  The employee had emergency surgery.,1
An employee was hospitalized with a fractured femur after slipping on a nacho lid and falling in the store.,1
"An employee was admitted to the hospital for burns on the left arm and abdomen from Ster-Bac, a liquid quaternary ammonia sanitizer.",1
An employee's right thumb was pinched between the pattern hanger bar and the base of the machine swing arm on a vertical molding machine.,0
An employee climbed on top of a chair to make an adjustment to an extruder (E2).  The employee got the middle finger on his right hand caught in rollers causing a partial amputation.  ,0
An employee's foot was caught between the PIT he was operating and another parked PIT. The injury resulted in overnight hospitalization and surgery.,1
"An employee was admitted to the hospital for 1st and 2nd degree burns sustained to 40-50 percent of the body after coming in contact with hot pulp and fluids while emptying ""junk"" traps.",1
"On or about May 25, 2015 at 8 pm, an employee received second degree burns on her hand, leg, and foot from hot oil.  The employee was dumping a bucket of hot oil when her hand slipped off and the hot oil splashed her.",1
"An employee was using a chain saw while ""bucking"" logs at a small (1/10 acre) forest fire.  The employee suffered second and third degree burns on the arms, neck and face when the chain saw failed/exploded/flashed.",1
An employee fell approximately 12 ft. to the ground while installing a valve on a aircraft engine. The employee sustained a fractured wrist and head trauma.,1
An employee was changing out a needle board. The new one he was putting in fell and scratched his hand.  An infection developed and the employee was later admitted to the hospital.,1
"On or about May 25, 2015, at 4:00 pm an employee was supporting a highly mobile resistant resident and fractured her back.  Later, she had trouble moving her feet and was hospitalized for treatment.",1
"The employee was operating a sit-down forklift to load an outbound trailer. Upon forward motion by the trailer, the employee was struck by a metal strap which became dislodged from the interior of the trailer.  The metal lacerated the left leg.",1
"On 5/26/2015, an employee was on a ladder about 4 to 5 feet from the ground and close to the trash chute. When he was reaching over to secure plywood, he lost balance and fell injuring his left leg and wrist.",1
"A four inch diameter drill casing used to load shot when blasting for bridge footings approximately 100 feet deep exploded.  The employee was in a designated area assigned for loading the shot.  The shot was complete and clean-up was being performed.  Once the shot has been ignited in the casing, the casings are retrieved and placed into a scrap trailer.  An employee was attempting to cut the casing with a cutting torch to fit into the scrap trailer when the casing exploded. The employee's face and arms were cut requiring stitches.  He also has ringing in his left ear.",1
"An employee was on a ladder. While coming down the ladder, he missed the bottom step and fell to the ground breaking his hip.",1
Employee was roll forming steel when his left hand and arm were caught in the rollers. Employee underwent emergency surgery and was hospitalized overnight.,1
"Two employees were working in an excavation placing concrete with a bucket attached to an excavator when the bucket fell from the excavator, striking both of them.",1
An employee was thrown from an ATV and sustained two cracked vertebrate and three broken ribs.,1
An employee was deep cleaning a classroom when he slipped on the wet floor and fractured the right hip.,1
An employee was exiting the forklift truck when he slipped and fell to the ground. The operator suffered a broken femur and was admitted to the local hospital.,1
An employee amputated the left ring finger while operating a cleat maker machine.,0
"On May 26, 2015, the employee was delivering mail on his route when he collapsed.",1
An employee was standing at a forklift removing the propane tank when a front-end loader backed into him.  His hip and back were crushed and he was hospitalized.,1
"The injured employee was about to start loading a truck from the mattress staging area which was approximately 7'.  The mattress was standing upright and lined up to form a wall to be loaded onto the truck.  As the injured employee step out of the staging area (blind spot), another associate operating the forklift, could not stop in time and ran over the injured employee's left foot.",1
"An employee walking from the deli department slipped on a piece of lunch meat and fell, fracturing her hip and femur.",1
"On or about May 26, 2015, an employee was hospitalized when struck-by steel angle iron material on a crane.",1
An employee was shot by a customer while working.,1
"An employee was setting up the in-line vacuum forming machine line. The guard was off at the time of the incident and the interlock held down with a clamp. At the trim press stage, the employee came in contact with the steel rule die and amputated the index and middle fingers on the right hand.",1
"The employee, a rural mail carrier, observed a pick-up truck traveling towards her at a high rate of speed and possibly out of control. She was operating a personal vehicle, and pulled over to avoid the pick-up. The pick-up truck struck the employee's vehicle causing the air bags to deploy. The employee suffered broken ribs.",1
"An employee was standing on a stock picker loading freight onto a pallet when he slipped and fell approximately seven feet injuring both wrists, an eye, and his neck and head. The employee was not wearing a harness at the time of the incident.",1
An employee was changing out a coil using an indoor crane and rigging chain. His hand was caught  between the coil and rigging chain amputating his right index finger.,0
An employee was climbing up a ladder and slipped and fell onto his ankle. The employee was hospitalized.,1
An employee was retrieving bolts from a cardboard box onsite when he was bitten on his right hand middle finger by a copper head snake that was in the box. The employee had a reaction to the anti-venom and was hospitalized.,1
"A housekeeping employee received an eye injury while mopping the floors.  The employee had placed the mop in the bucket and turned away.  While the employee was turning back around to get the mop, the handle slipped from its original position and struck the employee in the eye.",1
"On or about May 26, 2015, at 1:30 am, an employee was removing a half barrel keg from a second layer.  The keg, weighing approximately 175 pounds, fell approximately 3 1/2' hitting the employee's foot/toe.  The foot became swollen and the employee had surgery on the foot and was subsequently hospitalized.",1
An employee was adjusting the rail on a bed and caught his left pinky finger in the rail.  The fingertip was amputated.,0
An employee was delivering mail when the employee felt knee pain. The employee was admitted to the hospital due to a knee injury that is resulting in surgery.,1
"An employee was making an adjustment on KVAL door manufacturing equipment during which time his hand slipped off of a wrench and came in contact with the rotating, boring bit, causing the loss of skin and a bone on the back of his hand.",1
An employee operating a runner injured his left foot while making a U turn.,1
An employee was struck by fragmented pieces of a grinding disk and was hospitalized as a result.,1
"An employee fell from an access platform behind the cab of the truck, falling approximately 3ft onto the pavement and breaking his right femur. The employee was admitted to hospital for treatment of his injuries.",1
An employee lacerated his right hand and was hospitalized.,1
"An employee was adjusting a belt on an HVAC compressor. The pulley kicked on and the speed of the belt injured the employee, resulting in fingertip amputations on the index and middle fingers of the left hand.",0
"An employee was working in the back room doing salad prep.  While sweeping up lettuce from the floor, the employee bent down to pick something up and tripped on a drain cover in the floor. This caused the employee to fall and fracture the left femur. The employee was admitted to the hospital for surgery.",1
 An employee was working on a pallet dismantler machine when his right hand was caught in the  machine while removing a piece of wood that was causing a jam.  The tip of the employee's right thumb was amputated as a result.,1
The employee slipped and fell on the way into work. The employee was admitted to the hospital and had surgery for a fractured left femur.,1
An employee experienced an amputation injury around 10:50 A.M. on 5/26/2015.,1
An employee slipped and fell to the ground while accessing a loader. The employee broke his collar bone.,1
An employee was removing material from the attic of the church and fell approximately eight feet through a section of the ceiling landing on the floor.,1
An employee injured the right ankle while exiting a stall in the restroom.  The employee required surgery and hospitalization as a result.,1
"An employee working as a loader at the warehouse and was cleaning the bottle rack located outdoors when a venomous snake, believed to be a Copperhead, bit the employee's right index finger. The employee was admitted to the hospital for treatment.",1
An employee suffered the amputation of the right pinky fingertip while trying to secure an access panel that guards a rotating auger.,0
An employee was lifting a battery and suffered a hernia.  The employee was taken to the hospital and kept for surgery.,1
"An employee was operating a Lectro P.I.V. and struck a PCA air handler while in route to meet a flight.  The employee suffered a lacerated liver, chipped vertebra, and bubbles in the intestine.",1
"An employee was lifting a lid on a tumbler vat that hinged at the bottom and swung downward. The employee was using a chain to lift the lid and the chain slipped catching the employee's left ring finger, removing the fingernail and underlying skin.",0
"A temporary employee was loading an aluminum casting onto a CNC fixture. She placed her hand on the casting to hold it in place until the clamp locked. The clamp grabbed her right glove, smashing her thumb.",1
A residential trash collection employee was hospitalized after succumbing to dehydration and heat cramps.,1
"An employee was sorting parts in the parking lot when a semi-truck owned and operated by the employer backed into him, causing a right leg laceration and fracture. The employee was taken to the hospital and admitted overnight for observation.",1
"The employee was on site in Claremont, FL taking down a scaffold and moving material. He complained to the site supervisor that he was not feeling well. The employee began to cramp after sitting down and drinking some water. The employee was taken to the hospital and admitted overnight for observation and IV fluids.",1
An employee performing diagnostic tests on a crane fell approximately 7.5 feet through an open hatch and was hospitalized.,1
On or about 05/27/2015 an employee came into contact with an energized cable.,1
"On May 27, 2015 at approximately 1:30 p.m., an employee received 2nd and 3rd degree electrical burns to approximately 55% of his body when a crane boom contacted overhead power lines and the employee came in contact with the crane.",1
"An employee was working to remove a tire from a trailer at the trailer shop on the south side of the property. The tire exploded and caused a second tire to hit him. The employee suffered multiple fractures in his leg, neck, and ribs.",1
An employee received an amputation of the right hand while operating a mechanical power press.,1
"On May 27, 2015 at 14:30 the employee amputated four fingers (all except the thumb) on his right hand while operating a press brake machine.",1
"A temporary employee was setting up a precast form onsite. The employee was attempting to insert a safety pin into the precast form bracket. As he was inserting the pin, his left middle finger was caught between the form and the bracket which crushed/pinched the tip of employee's finger. There was no bone loss; only skin and finger nail.",0
An employee was removing a section of pipe when the wrench slipped and the employee fell backwards breaking his right leg just above the ankle.,1
An employee fell from a ladder.,1
Employee was driving a mini bus in San Antonio City and was involved in a head on collision. The employee was admitted to the hospital for surgery to treat a laceration to right eye.,1
An employee slipped off a scaffold that was 45 feet high while hanging curtains from the ceiling of the sanctuary on 5/27/2015 at 8:35pm.,1
"An employee removed a guard on the ST04 to clear a jam in the packaging film.  After clearing the jam, the employee removed meat from the pockets to be rerun.  The employee reached in the seal head area which had a sensor that triggered the lift to raise the form box to the seal head.  The employee's left hand was caught between the seal head and the form box.  The employee sustained third degree burns to the top of their left hand and two broken fingers.  ",1
"An employee was operating a fastener tool. While checking the tightness of bolts, he lost balance and pinched his right hand pinky finger between the fastener tool and the wall. Employee suffered an open fracture of the right hand pinky finger and was hospitalized.",1
An employee cut the tip of the finger off using a paper cutter. ,0
An employee was bitten by an insect while cleaning and the employee was allergic to the insect; the employee was taken to the hospital.  ,1
"The employee was installing plastic electrical conduit onsite. The circuit was energized from a 7200 volt transformer located near the sidewalk. When the employee attempted to connect the conduit to the transformer, his right bicep contacted the transformer. The employee was on his knees when he received the electrical shock and he fell backwards and/or collapsed. He was admitted to the hospital on 5/28/2015 at or around 4:30 p.m. and treated for burns received from the electrical shock.",1
"An employee was putting out a fire that occurred in an auto body paint booth and fell, shattering the right elbow. The employee also suffered burns to the arm and torso.",1
An employee experienced a left thumb amputation when it was caught in a foam machine auger.,0
"On the morning of 5/27/2015, an employee was bitten on the right hand by a stray cat while on break in the dock area of the plant.  Later that night his right hand and arm were swollen and he was in pain.  He was admitted to the hospital overnight for treatment.",1
"Two employees were engaged in a physical altercation and one employee was knocked unconscious, resulting in a hospitalization.",1
An employee brushing walls with a masonry brush near the northwest corner stairway attempted to step from a step ladder onto a scaffold resulting in a fall.  The employee was admitted into the hospital with a collapsed lung. ,1
An employee crushed his left ring and middle fingers while flipping material that was going to be machined into a holding plate fixture.  The 280 pound material was on a sling using a basket configuration in which the sling had two holes attached to the 5-ton crane. His fingers were crushed between the material and the work table resulting in the amputation of the fingertip of the ring finger above the knuckle.,0
An employee was on the ground with a power unit. Another employee was backing up the tug to hook up to the ground power unit.  The employee backing up the tug hit the gas and pinned the injured employee between the tug and the ground power unit.,1
An employee suffered a broken wrist as he attempted to close a container door while sitting on a forklift. The employee's wrist was caught between the door of the container and the cage of the forklift.,1
"Employees were unloading the BOP from the trailer to start nippling up. The injured employee was assisting in the lift and had his hand on one of the cables. His gloved hand was pulled into a pulley when the BOP shifted, resulting in the amputation of the middle fingertip on his right hand.",0
An employee was attempting to realign a part in the rotary stencil machine when he amputated the left index finger.,0
A temporary labor employee was using a grinder outfitted with a cutting wheel to cut metal truss material for the roofers. The employee's glove was caught by the spinning cutting wheel drawing the employee's hand into the cutting blade. The employee suffered lacerations to the wrist and hand area. The employee was sent to the hospital where he was admitted.,1
"An employee was working on a lawn mower on a mower jack with the safety device on. The employee grabbed the safety device and pulled it out causing the lawn mower and jack to lower, catching his left ring finger under the jack. The fingertip was amputated.",0
An employee was removing a brace from a forklift when the brace fell and severed his left middle fingertip.,0
A driver was attempting to deliver packages to a private residence when he was attacked by two pit bulls. The driver sustained injuries to the arm and foot.,1
A propane delivery driver received burns to the face and neck after the relief valve on an underground tank failed spraying propane on the driver.,1
"On or about May 28, 2015, an employee's left index finger was amputated when it was caught in the cutter bar while setting up a pneumatic cutter.",0
"An employee was operating a front end loader to load solid waste/refuse into trucks.  The employee parked the front end loader parallel to a concrete wall.  The employee exited the loader by stepping from the loader onto the concrete wall. The employee slipped off the concrete wall and fell to the ground.  The employee suffered a laceration on the right side of his head, and dislocated his right shoulder.  The employee was hospitalized for surgery to repair his dislocated right shoulder.",1
An employee suffered second degree burns to the right arm and leg while unclogging a hot wax line. The employee was hospitalized.,1
An employee working at the register tripped over a gator cord and fell breaking the left knee.,1
An employee was changing the grinding stone on the grinding  wheel when the grinder came on and the stone broke striking the employee. The employee had surgery for internal injuries.,1
An employee was injured after falling off a step ladder.,1
An employee was using a saw to cut vinyl extrusions and cut his right hand across the knuckles.,1
An employee reached into a crimping machine to unjam product prior to the machine cycling back around to crimp the product and sustained a right index fingertip amputation.,0
"An employee closed a safe door on her thumb, amputating it.",1
An employee walking across the work room floor became tangled in plastic shipping straps used to hold boxes on a pallet and fell on the right knee.  The employee was admitted to the hospital for knee surgery.,1
"An employee was removing a part in a metal stamping die press and once the part was dislodged, it fell onto the employee's left ring finger causing a fingertip amputation.",0
"An employee was inspecting a manhole vault at the intersection of Lyman Street and Centre Street in Newton, Massachusetts. As he transitioned from an extension ladder to the ground level, he fell approximately 11 feet, 7 inches, back into the manhole vault, breaking his right ankle and requiring hospitalization.",1
The driver of an asphalt truck hit the overpass of a bridge.,1
"An employee was unloading a trainer (similar in appearance to a tool box on wheels) from a crate to prepare the crate for repair. As the trainer was being rolled down the built-in ramp using a winch, it started to tip off of the side. The employee attempted to prevent the trainer from falling on its side, resulting in the trainer striking the employee's leg. The employee was hospitalized.",1
Employee strained his back when he was pulling the gas trap lid with his hands.,1
"On or about May 28, 2015, an employee was working on line 1 and suffered a pinky and ring finger amputation injury by coming in contact with a rotating screw auger on the conveyor.",0
"While delivering mail to a private residence, a mail carrier was attacked by a resident's dog.  The carrier received 3 puncture wounds to the arm.  She received treatment the day of the event.  She went to a specialist the next day who admitted her to the hospital.",1
"An employee was struck in the leg by a falling cover to a 55 gallon drum while working in the cover painting area. The employee received a laceration. Later, the employee was hospitalized when the laceration became infected.",1
An agent was climbing a fence to inspect an abandoned house for illegal aliens when he was attacked by a dog.  The agent fell off the fence striking his head and possibly receiving a concussion due to his inability to remember any details of the event.,1
An employee was helping to lower a template that was being suspended by a crane when his right thumb got caught between the template and one of its folding parts. He was taken to the hospital for surgery to repair a broken thumb.,1
An employee had a finger amputation while being trained to run a gas house piston.,0
"The employee, operating a company vehicle, was involved in a two car accident at an intersection.  The employee was hospitalized.",1
"An employee was adjusting belts on the #130 rotary die cutter machine, when a gloved hand was pulled into the rollers breaking two bones in the right forearm.",1
An employee was injured while being transported in a personnel basket by a crane.,1
An employee was replacing a coil. The coil fell and the employee attempted to catch it. The coil lacerated his left hand.,1
"On May 28, 2015, a truck driver entered the scale platform from the opposite direction of its designed use.  The scale platform was designed with a walking surface on the driver's side and a guardrail on the passenger side.  The driver exited his truck and stepped onto the top rail of the guardrail system.  It was raining at the time.  The driver slipped and fell to the ground.  The driver experience a compound fracture to his left arm.  The driver was taken to the hospital, treated, and released the day of the accident.",1
An employee operating a table saw amputated the middle fingertip (down to the nail bed). The table saw was guarded at the time of the incident.,0
"At approximately 7:00 am on May 28th, the employee (a choker setter) was unhooking the choker while another employee was felling a tree below. The tree fell hitting the skyline which ejected trees and the employee into the air. The employee sustained a broken left tibia and fibula when struck by the tree upon hitting the ground.",1
"An employee fell approximately 12 feet, suffering broken ribs and a collapsed lung.",1
"An employee experienced breathing problems and head pain, possibly related to a previous injury. The employee was hospitalized.",1
An employee got caught between a dump truck and bailer belt while trying to clean debris from the bailer. The employee sustained rib and lung injuries.,1
"An employee standing on the second floor of the building fell approximately 10 feet to the floor below, injuring his left arm. He was hospitalized and underwent surgery.",1
"An employee was cleaning the laydown saw table (located at 5225 N. Broadway). The saw blade caught the employee's glove and pulled it into the saw, amputating portions of the right ring and pinky fingers.",0
An employee sustained an abrasion to his head and right hand when he tripped over a pallet while attempting to move a sofa in the warehouse on 5/29/15. He was hospitalized for an infection related to the hand laceration.,1
"An employee's left hand got caught between two sheeter rollers when she lifted the guard to adjust the rolls. She did not break any bones, but was hospitalized for treatment.",1
An employee accidentally hooked up a 55 gallon drum of solvent instead of a 55 gallon drum of waste water to the evaporative machine to perform cleaning operations.  The machine caught on fire on the inside and then created a flash fire on the outside which caused 2nd and 3rd degree burns to both hands and legs of the employee.,1
An employee was struck on the hand by a piece of concrete that fell from the ceiling while sweeping the floor. The employee suffered a partial amputation to the left ring finger.,1
"An employee was attending training and started feeling queasy/lightheaded during the module on blood-borne pathogens. He left the room and sat in the northeast stairway.  A short time later, he fell down the stairs and was found unconscious on the landing below by a coworker. His coworker woke him up and asked if he was okay. The injured employee stated that he was okay, just tired. He was later hospitalized for a skull fracture and concussion.",1
An employee was struck by a steel beam that fell off of a pallet when it was moved.,1
"An employee was placing, compressing, and bolting together large 6x6 or 8x8 cut lumber. The employee's right hand was between two of the boards when the compression began, resulting in a severe crush and subsequent amputation to the second digit of the right pinky.",0
"An employee was working on the bubble-leak tester machine. The employee placed a part inside the machine and engaged it. The machine lowered the part into a water bath and then raised it. As the part lifted, it smashed the employee's middle finger, resulting in an amputation. The machine was not guarded at the time.",0
A maintenance employee cleaning out a machine motor sustained left forearm lacerations when his hand slipped while trying to stand up.,1
"An employee was transporting boxes of chicken tenders with a pallet jack. The load shifted and pinned the employee's finger between a stainless steel table and the pallet jack handle, amputating the top end of the right thumb.",1
An employee fell approximately 4.5 feet from a scaffold while installing ceiling material.,1
An employee pinched two left-hand fingers between the mast and hoist of a moving lift jockey. He was hospitalized and underwent surgery.,1
"An employee used his hand and arm to try to stop a swinging piece of equipment he was moving with an overhead crane. The equipment struck the employee's arm against a guard rail, resulting in a fracture.",1
An employee took a nap in his pickup truck in the shipyard parking lot because he felt sick. Coworkers found him on the ground next to his truck. He was subsequently hospitalized with a fractured C2-vertebra in his neck.,1
An employee was injured in a motor vehicle accident while performing work related duties.,1
An employee was struck in the head while carrying demolition out of a warehouse building.,1
An employee suffered 2nd and 3rd degree burns on the  right hand while working on a yarn roller which required hospitalization.,1
An employee was trimming weeds with a gas powered trimmer near a cement culvert.  The employee noticed a small branch resting in the culvert and tried to reach for it.  The employee slipped and fell approximately ten feet. The employee did not have anything in his hand at the time of the accident.,1
"An employee was working from a scissor lift. A bracket had been removed, and he stepped back and fell from the platform onto his back. He broke three ribs, ruptured his spleen, and fractured three vertebrae. He was hospitalized and had surgery on his ruptured spleen.",1
"An employee was engaged in hands-on training on a side-oriented forklift, observed by a trainer/coach. She pulled down a load from a rack and was preparing to set it on the floor. She moved too close to the rack and her trainer directed her to stop and move to the center of the aisle. She stopped the forklift and had her foot on the pedal with the wheels turned. She intended to move forward, but instead reversed. The forklift swung around 180 degrees, reversed, and went partially under the rack. She hit her back on the rack and stopped the forklift. She was held between the rack and the forklift steering wheel, with her foot on the pedal.  The coach/trainer reached the forklift pedal and joystick from the ground and maneuvered the forklift forward. He helped her down and laid her on the floor. She was hospitalized overnight for lumbar fracture pain management.",1
"On the morning of 5/29/2015, employee arrived at work at 6:00 am.  At about 6:05 he was securing a line to roll a cover on a barge. The hook somehow dislodged and became airborne striking the employee in his left upper arm. The hook was 4"" and weighed approximately 3 pounds. The cover of the barge became wedged and put tension on the line and then the hook became dislodged striking the employee.",1
"An employee was installing/performing work on an HVAC system and had to enter the attic for an undetermined amount of time. The employee came down into the lobby of the facility where work was being performed, collapsed, and lost consciousness.",1
An employee suffered a partial finger amputation while using a cutting machine.,0
"An employee was climbing down the fixed ladder, slipped on the front loader's tire and fell 3.5 feet to the ground. The employee was admitted to the hospital with a broken right hip.",1
An employee was walking when he tripped over the forks of a forklift and fell on his face.,1
"An employee was performing maintenance work on an MRI machine. He had to cross electrical points, and received a discharge burn on his right hand and arm.",1
"While standing and talking, an employee's foot slipped off of the edge of the sidewalk. He fell into the parking lot, breaking his right femur and hip.",1
"An employee suffered a leg injury after being pinned between a concrete form and a concrete truck at or near 25 Airport Road in Minot, North Dakota.",1
"On 06/29/2015, at approximately 3:00 p.m., an employee slipped in the kitchen area, fracturing the lower left leg while placing dishes in the dish rack. The employee was hospitalized.",1
"On May 29, 2015, an employee was working inside a sulpha treat reactor vessel using a high pressure (5000 PSI) water sprayer gun to cut off the congealed catalyst material inside. The employee slipped and fell; the high-pressure water sprayer hit the employee's right foot and punctured a hole through the rubber boot. The employee sustained a puncture open wound on the right foot, second toe. The employee was hospitalized and received treatment.",1
An employee was burned by an arc flash/blast while troubleshooting an electrical problem.,1
An employee tripped over a box that was next to her desk. She was hospitalized and underwent surgery for a fractured elbow.,1
"An employee suffered a fractured leg after getting pinned between a semi truck and a tank at or near 58th Street NW in Williston, North Dakota.",1
An employee suffered an amputation to the right-hand index finger and an injury to the left-hand middle finger when a light curtain failed to protect the point of operation from a press in the manufacturing operation.,0
An employee sustained a partial amputation while bundling steel.,0
Employees were removing a drill pin from the drill rig equipment when an employee stuck his left hand in the metal mold. He sustained an amputation to his left index finger and middle finger behind the fingernail.,1
An employee suffered a crushed-by-type injury while preparing to perform cleaning operations on the fabric calendar line.,1
"An employee slipped and fell while descending the mezzanine work area using a stairway with metal rungs for steps, breaking two ribs.",1
"An employee turned to get a pack of cigarettes and fell, breaking her hip.",1
"An employee was operating a band saw when the saw bound up on him, kicked back, and pulled his hand into the blade, amputating his left-hand, first thumb digit.",0
A employee was injured after falling into an unfilled pool. He experienced back and neck pain.,1
A forklift carrying a tote inside a box truck crushed an employee between the tote and the truck wall.,1
"On or about 5/30/15, an employee was bitten by a mosquito while conducting lab work outdoors on Wallops Island in Virginia. The employee was later hospitalized. The mosquito may have been infected with the West Nile virus.",1
An employee was cleaning the disk of a tractor used for tomato-growing operations with a rag when an insect bit him on his left leg on 5/26/2015. He was later hospitalized when the bite became infected.,1
"An employee tripped and fell, dropped his hose, and sandblasted his own stomach while sandblasting a fuel tank.",1
A mask machine cut an employee's finger. The guard was removed at the time of the incident.,1
An employee was performing maintenance on a crane when it fell on the employee.,1
An employee was loading equipment and tools onto a truck to prepare to leave a well site. The employee was standing on a lubricator rack/catwalk where he was releasing the straps on the crane when the catwalk collapsed. The employee fell approximately 5 feet to the truck below and hit his head. He was hospitalized.,1
An employee held a beam while driving a forklift in the warehouse. He lost control and injured his left hand.,1
"A Santana Textiles employee was working from a ladder when he slipped and fell 4 feet. He tried to grab onto the wall and fell, fracturing his left arm and scraping his forehead. The worksite was very muddy from recent rains at the time of the incident.",1
A spider bit an employee under the right arm while the employee was setting up a display booth. The employee was hospitalized.,1
An employee was taking apart a cylinder from a Clovis Machine.  The cylinder fell and caught the employee's left middle finger between the cylinder and the work table.,0
An employee was working on an elevator when it suddenly started to go up. The employee was lifted 12 feet and fell over the guard rail.,1
A projectile from a CO2 compressor valve struck an employee in the face during maintenance.,1
An employee was hospitalized after being involved in a rollover accident while riding as a passenger in an ATV. He injured his right knee and required surgery.,1
An employee was struck by a semi-truck while walking to his vehicle in the parking lot.,1
"On or about 1300 hrs on 31 May 2015, a One Source Industrial Services employee was hospitalized when the employee's vehicle overturned on CR 5000 in Andrews County, Texas. The incident occurred as the employee attempted to turn onto CR 5000. The employee lost control of the vehicle, causing it to overturn and resulting in a broken arm, bruised ribs, and a possible concussion.",1
"An employee was setting up Planer #2, a wood cutting machine, to cut lumber. He dropped his wrench in the machine, which was running at the time. As he reached in to retrieve his wrench, his hand got caught in the roller and the other moving parts, peeling the skin from his right hand and three middle fingers.",1
An employee reached his hand into the swage/crimp machine and suffered a right index fingertip amputation. The machine was running at the time of the incident.,0
An employee was hospitalized after hitting his head on the edge of an escalator pit and possibly contacting live electrical parts.,1
An employee fell to the ground while climbing down from a scaffold.,1
An employee fractured the right foot while changing the battery in a stand-up electric forklift.,1
"On or about June 1, 2015, an employee was injured and hospitalized while performing pipe cleaning duties and tasks.",1
An employee lacerated his left forearm from the elbow to the wrist on a dovetail anchor as he poured concrete in formwork. The employee was hospitalized for treatment.,1
"An employee was performing maintenance on the C-Spinning machine when his left hand got caught in the clamp, amputating his left thumb tip.",0
An employee received a partial finger amputation after his finger got caught in a chain that was lifting a fuel barrel.,0
"An employee was standing on the fifth rung of an A-step ladder while installing a piece of plywood to the ceiling. The plywood slipped off his hands and pushed him back, causing him to lose his balance and fall on the ground. He broke the lower portion of his right leg.",1
An employee was placing material inside a drill press when the press came down and caught his right glove. The distal half of his right thumb was amputated at the middle joint. He was hospitalized and received treatment.,0
An employee was in the break room when a car from the public roadway crashed into the store. The employee was thrown 10 feet across the building and was struck with materials. She was hospitalized overnight.,1
"An employee was taking HVAC equipment to the dumpster and was helping to slide the ducts off the forklift forks. His hand got caught when the duct work slid backwards on the forks, amputating his right thumb tip.",0
An employee had three fingers crushed/amputated while he was loading a part into a CNC machine with another employee.  ,0
An employee severely lacerated the palm of his hand after coming into contact with a chipper blade. The chipper was not running at the time.,1
An employee was operating a forklift with their foot hanging outside of the equipment. The employee's foot got smashed between two forklifts.,1
"An employee fell to the dock floor and fractured his left elbow during delivery at the VA Hospital in East Orange, New Jersey.",1
"An employee's finger got caught in the manual bender machine while loading a pipe, amputating the right ring fingertip.",0
"An employee was hospitalized after they missed a step while dismounting a bulk semi-trailer. The employee fell 2 to 2.5 feet to the ground, fracturing their right hip.",1
"An employee was removing roof debris from the gutter of a residential house while standing on an extension ladder. As he reached his hand to remove debris, he fell off the ladder and hit the ground.",1
An employee's hand was resting on a dock plate. The dock plate shifted and amputated the employee's fingertip.,0
"On June 1, 2015, at 10:00 a.m., an employee was moving a 160-pound steel die along a roller conveyor when his finger got caught between the die and a conveyor roller, amputating his right index fingertip.",0
An employee's right index fingertip was amputated after it was caught in a pinch point between a rotating auger blade and the blade's enclosure fixture.,0
"A maintenance employee was installing a lacing wire to the support that runs underneath the floor.  He stepped on the floor tile he had removed, then slipped and hit his head against the tile cross support beam. He injured his head, right shoulder, right wrist, right ankle, and back.",1
An employee suffered left arm swelling after a suspected insect bite and was later hospitalized for treatment.,1
"Rotating shaft, caught-in hazard located in the bakery section. The hazard was located at the conveyors.",1
An employee caught the edge of a pallet with his right foot and dislocated his ankle.,1
An employee's right thumb was partially amputated after a collision that occurred while he was operating a motorized pallet jack.,0
An employee slipped and fell on a floor that was wet with wax stripper. The employee lost consciousness and sustained a concussion and head lacerations.,1
"An electrical contractor was installing a 480 volt electrical panel at a customer location. The employee pulled wires to the panel the day before the accident, but did not finish the job. When he returned to the facility the next day, he got on a ladder and touched the panel that he thought was cold. At some point between the time he left the panel and returned to finish the job the wires were energized. The employee was shocked and thrown from the ladder. He received burns on his hands and was admitted to the hospital.",1
"On June 2, 2015 an employee was working on an automotive strut. A spring released and penetrated his left hand. The employee was transported to the hospital where surgery was performed to remove the spring from his hand.",1
An employee sustained middle finger debriding on the left hand when he was engaged in changing the belt between the motor and the gearbox on the log deck and the belt became energized.  Lockout procedures were not initiated prior to maintenance work being conducted.  The employee was taken to the hospital and admitted for surgery to reattach skin.,1
The employee was leaving the church building and walking within the courtyard.  The employee lost balance and fell on the lawn.  The fall resulted in a fracture of the right arm and the employee was hospitalized.  ,1
"On or about June 2, 2015, an employee performing maintenance on the EMBA machine injured the left hand when it was pinched between a belt and a cylinder on the machine.",1
"An employee drove a forklift into a freezer trailer. The forks got caught on a floor plate, jarring the forklift. The employee's neck was injured.",1
"A guide was back-country skiing with a client and fell, sustaining serious injuries.",1
An employee was filling a tire from a piece of farm equipment when the bead broke causing the tire to explode. The employee suffered two broken arms and facial injuries.,1
"While removing and replacing worn wire rope on a hydraulic tugger winch, the injured employee's left foot was caught in the wire rope while the drum was rotating.   The employee was hospitalized and had toes on his left foot amputated.",1
An employee got her right hand caught in a belt conveyor and received lacerations on the index and middle finger. ,1
"A materials delivery truck got stuck in mud. Employees planned on using a loader to pull it out. While in the process of hooking the back of the loader to the delivery truck, the loader rolled backwards and pinched the injured employee between the truck and the loader.",1
"An employee reached into a conveyor to remove a bag that was tipped. His hand got caught in the chain conveyor, resulting in hospitalization.",1
"On or about June 2, 2015, a temporary employee working in the facility was hospitalized after cutting the left hand on a table saw.",1
"On or about June 2, 2015, a forklift's forks dropped unexpectedly, pinning an employee's wrist between the forks of the forklift and the post support. ",1
An employee was descending a ladder when he slipped and fell approximately 8 feet to the ground. ,1
An employee's right index finger was amputated at the second knuckle as the employee adjusted a drive belt that was slipping.,0
"On or about 0530 hrs on the 2nd day of June 2015, an employee was injured when the vehicle he was driving overturned on a lease road approximately five miles east of Mentone Texas. The employee was hospitalized with three broken ribs on the right side of the thorax and a broken rib on the left side of the thorax.",1
An employee's fingertip was amputated while using a table saw to perform carpentry work.,1
"An employee was inspecting airport contractor equipment for unattended mail.  She heard a noise behind her; she then tripped and fell over the connecting tongue of one of the carts. When she fell to the ground, her left knee cap was broken on impact. She was hospitalized.",1
An employee was injured after being struck by a powered industrial truck.,1
An employee sustained a left ring finger amputation while attempting to clear a bind in a reel of electrical cable.,0
"An employee was working on a trailer door and pinched the end of his finger in between two of the panels of the trailer door, amputating the tip of his right ring finger.  The employee took the clamp off the track before attaching a horizontal bracket.  After removing the bracket the employee was unable to hold the door while trying to retrieve a ladder.",0
"An employee was delivering product(chem treat bel1544) to a customer location using a tanker truck. The employee  removed a cap to the discharge line and the chemical sprayed onto his face. As a consequence, the employee had 2nd degree burns in the mouth lips and tip of his tongue. The employee was hospitalized.",1
An employee fell to the ground from approximately 10 to 12 feet while descending a tree.  The employee broke his left tibia and was admitted as an in-patient at a hospital. ,1
An employee fell 15 feet to  the ground from a walking surface on a section of scaffolding.,1
"On June 2, 2015, an employee was struck by an 18-wheeler truck while flagging traffic on the highway. The employee was hospitalized for multiple injuries.",1
"On June 2, 2015, an employee suffered an amputation to the right index finger while attempting to unjam a pallet washer. Lockout/tagout procedures were not performed at the time of the incident.",0
"An employee was loading a duct jack in a pickup truck with other employees when he slipped and got caught on the truck's tailgate, injuring his right shin/leg. He was hospitalized.",1
An employee was swinging a sledgehammer to knock pins out of aluminum sows and smashed his left hand pointer finger in the process. The employee was taken to the hospital where it was determined that the finger needed to be amputated.,1
"An employee was using Gatorade bottles to store floor cleaning products.  The employee mistakenly drank the floor cleaner, became very ill, and was hospitalized.",1
An employee was trying to adjust the belt on a folding machine when his right hand was drawn into the machine. The employees hand was caught (pinched) between two rollers.,1
An employee was polishing a tool on a polishing lathe when a finger slipped inward resulting in a right index finger injury. The finger was amputated below the first knuckle at the hospital.,0
"An employee suffered an amputation injury while putting parts into a jig at or near 210 First Avenue NE, North Dakota.",0
An employee was injured and then hospitalized after receiving a wound from a hole punch from a trim press.,1
"An employee was cleaning three different facilities and using a vehicle to get between buildings. She was exiting the vehicle at one of the buildings and fell, striking the curb and fracturing her hip.",1
"On 06/03/2015, around 2:00 P.M., an employee was wearing rubber gloves while handling adhesives in the facility. The employee finished handling the adhesives and went to cut metal pipe banding. As the metal banding was cut, it retracted to the floor and bounced up, cutting the employee at the knuckle on the right middle finger. Company-provided leather gloves were not worn at the time of the incident. The employee was later hospitalized for a possible infection and received antibiotics.",1
"On or about 3 June 2015, at approximately 1825 hours, an AR Daniel Construction employee was hospitalized due to an injury acquired at the jobsite. The employee was working in a trench under the railroad tracks located at Grand and 3rd street in Amarillo, Texas, when he was struck in the face by a piece of angle iron that was being used to hoist the pipeline that he was working near. The angle iron was inside the pipe, and a line was tied to the angle iron to hoist the pipe up enough for the employee to remove wood planking from underneath it. The angle iron became dislodged and struck him, causing multiple facial fractures and lacerations.",1
An employee was moving sows to an open pen when the right middle finger was caught in the pen gate or locking pin for the gate causing an amputation.,0
An employee tripped over a computer cord and fell resulting in a fractured patella and right ankle.,1
Employee lost balance with a leg by the conveyor and sustained a left ankle laceration.,1
On or about 3 June 2015 at 0715 hrs an employee suffered an amputation of the distal portion of his middle phalanges left hand. The employee was attempting to replace a flange when the flange slipped and pinched his phalanges between it and the structure he was placing the flange on.,0
"An employee operating a PIV(tugger) pinched a finger between the light beacon post on the tugger and a rack, resulting in an amputation of the left middle fingertip.",0
A worker was disposing of waste into a foot-operated receptacle when the employee fell while using her foot to operate the foot pedal and broke her leg.,1
An employee working in the prepared food area was rolling a cart loaded with food from a walk-in cooler when the cart tipped over and landed on her left leg fracturing it in multiple places. She was hospitalized for surgery to repair the injuries to her leg.,1
An employee walking towards the barbecue pit to retrieve a chicken fell and broke his right leg requiring surgery to repair.,1
An employee was searching for the weld in the wire and suffered an amputation to the right index fingertip when the finger was pinched by the wire annealing machine.,0
An employee was performing maintenance on a compressor fan and suffered an amputation to the tip of the fourth digit (ring finger) of the left hand when the finger came into contact with the fan blade.,0
"On June 3, at 7:25 PM, an employee disarmed an alarming crash bar; while returning to her desk, she fell to the ground. She hit her left hip, and her left leg gave out and got twisted. She was hospitalized for a fractured hip.",1
The employee was hooking up the trailer dolly to the trailer. A pin on the dolly had fallen down and the employee reached down to correct the pin. The dolly was still moving and pinned his fingers between the I-ring of the dolly and the trailer hitch. The employee's first digit of his right pinky finger was amputated.,0
A worker was erecting a one section high rolling scaffold.  He was approximately 5-6 feet off the ground on the platform when the end frame detached while he was trying to install a cross brace. The worker fell and the frame struck his leg.,1
"An employee was working as a laborer on a road paving jobsite when his lower left leg was run over by a tire on a Weber machine, which picks up ground-up road surface material and transfers it to a conveyer belt that drops the material into a paver machine.",1
An employee fell on the same surface while moving a box of fruit and broke a leg.,1
An employee tripped over a piece of protruding rebar and fell to the ground.,1
"A border patrol officer was at the gun range working on his annual weapon qualifications.  The officer was drawing and firing his gun from the holster. The weapon discharged as he pulled it out, hitting him in the leg and striking a bone. The officer was admitted to the hospital where they performed surgery.",1
"On or about 6/3/2015, an employee was walking on site carrying equipment for testing. He slipped on gravel and fell while trying to grab the equipment, severing his right thumb.",1
"On the afternoon of 6/03/2015, at approximately 1:20pm, the employee was attempting to load a coil of steel that weighted approximately 378 pounds onto a forklift.  The steel coils are stored in a rack that resembles a bicycle rack.  She went to turn the coil away from the rack so that it could be picked up by the forklift.  She lost control of the steel coil, it tipped over, and struck her right upper leg resulting in a broken bone. She was admitted to the hospital for surgery on 6/04/2015.",1
An employee was treated at the hospital after falling approximately 5 feet to the concrete floor below while descending nine-foot portable stairs. The employee tore his rotator cuff and received stitches to his left elbow. The employee was attempting to dislodge a chain attached to an overhead crane at the time of the incident. The employee was unloading wire mesh from a delivery truck in the Blue Building garage door area.,1
The employee was working on the sausage line and caught his finger in the machine while he was trying to remove a piece of hanging sausage.  The incident resulted in the amputation of the third and fourth digit on the right hand.,0
An employee was moving a pallet of parts down a ramp into the basement using a non-powered pallet jack when the load got away and pinned the employee between the pallet jack and the wall breaking the employee's fibula and tibia.  The employee required surgery to repair the fractures.,1
"An employee arriving for work was walking from her car to the store. While in the crosswalk in front of the main doors, she was struck by a customer's vehicle at around 8:00 p.m. resulting in a loss of consciousness.",1
An employee was employed as a tour guide for this steel mill facility.  He was giving a tour and was walking down a two step set of stairs when he missed the second step and fell to the floor. Later that day he went to the hospital and was admitted for three broken ribs on his left side.,1
"The injured employee and another co-worker were loading a roll of poly with a rod onto the Line 12 packing machine. The rod goes through the center of a poly-roll. The injured employee was setting the rod into the machine and smashed her left index finger between the rod and the packing machine, amputating the left index fingertip.",0
An employee was hospitalized due to a fall to floor resulting in a head injury.,1
"On or about 6/3/15, an employee had multiple fingertip amputations while assembling a vertical cylinder.",0
An employee fell from a table and broke his back.,1
A temporary employee under on-the-job-training in his first day of work had the tip of his left hand middle finger amputated during the operation of a RAS beading machine.,0
"An employee was operating a Yale forklift when he stuck his left hand outside the cab of the forklift. His left hand got caught between the front left vertical member of the forklift's overhead guard system and the metal horizontal rail of an adjacent grading table. He sustained injuries to his left hand, requiring a left thumb amputation at the hospital.",0
"An employee was stocking parts on the second floor of the building. While walking backwards, he lost his footing and began to fall to the ground. As he fell, he extended his left arm to grab hold of something; his arm instead got caught on one of the fenders on the shelf.",1
"On or about June 4, 2015, at 11:15 a.m., an employee was crushed by a core box when the hand truck, which was supported by a bucket, shifted and pushed him over onto his back while he was still holding the box. He fractured his right hip and was hospitalized for treatment.",1
"An employee was moving a countertop from a delivery truck. He stepped off the tailgate and lost his footing. The countertop landed on his right pinky finger, resulting in an amputation at the hospital.",0
"An employee's foot got caught under a forklift, requiring overnight hospitalization.",1
"An employee slipped and fell, resulting in head injuries.",1
"An employee was operating an overhead crane with a plat clamp attachment to reposition a 12-inch diameter by 12-foot long rudder stock to its opposite side. The load was out of position at an approximate 75-degree horizontal angle instead of a vertical 90-degree vertical position beneath the crane. The employee was standing to the right of the rudder stock being moved. As the load began to swing away from him, he attempted to control the swinging motion with his left hand.  His left ring finger got pinched between a nearby metal stand and the rudder stock.",0
An employee's left ring finger was amputated down to the first knuckle from a rotating chain and sprocket.  ,0
An employee was hospitalized for a finger injury when her right ring finger was severed at the knuckle and reattached.  Her ring caught on something while she was reaching for an item on a shelving unit.,1
"An employee was replacing a door lock when a rusty screw went into the employee's finger on Thursday, June 4, 2015.",1
An employee received a head injury after he fell to the floor and struck his head while taping straws to cups.,1
"While cutting a sandblast hose, an employee cut his left forearm with a box cutter.",1
An employee welding on the hospital roof suffered heat-related symptoms.,1
"An employee was invited into the house by a customer to discuss Brighthouse products and services. The employee was stung on the back of the neck, requiring hospitalization.",1
"While cutting potatoes, an employee amputated two fingers, about 1 centimeter.",0
An employee was found on the ground next to a milk tanker trailer after possibly falling from the trailer's ladder. The employee was hospitalized for multiple injuries.,1
"An employee struck a wall while parking a stand-up Toyota lift at the end of the shift. The employee's body hit a metal safety suggestion box, fracturing the employee's pelvis. At the time of the incident, the Toyota lift was missing a safety strap that drags on the floor to dissipate static electricity.",1
"On 6/4/2015, at approximately 12:30 a.m., an employee was operating a sheet metal break press and attempting to bend a sheet metal part. He was performing a two-hand operation, holding one piece of metal with both hands. His right hand was on top of the metal, and his pinky fingertip was crushed by the ram as it lowered. There was no guard in place at the time. The employee was hospitalized.",1
An employee was injured when a coil of steel unrolled off of a pallet and struck the employee's left arm.,1
"An employee was struck by an excavator bucket, sustaining compound fractures and broken bones to the leg. The employee was hospitalized.",1
"An employee was performing a gaging around, checking outside operating conditions, and inspecting the equipment in the pharmaceutical unit. A pressurized hose connected to a process line and containing a contaminated chemical mixture of nitrogen and hydrochloric acid was nearby. The hose was pressurized but not flowing; it was closed by the valve. The employee was 3 to 5 feet from the hose when it became disconnected. He sustained burns to his abdomen, arm, and face.",1
An employee was unloading bushes on a truck flatbed when he/she fell approximately 4 feet to the ground below. The employee was hospitalized and required vertebrae surgery.,1
"An employee was ""webbing"" a printing press when two of the employee's left-hand fingers got pinched by a unit roller.",0
"An employee was attempting to sit on a chair located on a loading dock when he lost his balance and fell backwards off the loading dock, which was 34 inches above the ground below. He broke three ribs, fractured five vertebrae, and ruptured his spleen, requiring hospitalization.",1
An employee was moving rolling scaffold when the scaffold ran over a hose and tipped. A worker was on the scaffold at the time.,1
An employee received an arm injury from a wire stripper machine.,1
"An employee was wearing gloves to handle a hot hose to clean out an auger. The gloves snagged on the auger, amputating the left ring fingertip.",0
"An employee was holding on to the exterior top rail of a moving electric man lift with his left hand. The unit hit a horizontal brace, crushing his left-hand ring and pinky fingers.",1
An employee was replacing a suspension spring on a rig. He had to insert a pin in the spring as he let out the jack. His fingertip got caught.,0
"An employee lost control of a concrete pumping truck, which then rolled down over the hill. He severed his left leg and broke his arm and pelvis.",1
"An employee performing security walks around trucks stepped on uneven ground and fell, fracturing the left femur.",1
"While driving up a ramp, an employee lost control of a stand-up forklift, attempted to step off of the forklift, and was pinned between the lift and the wall.",1
"An employee working in the wheel polishing department suffered an injury, resulting in a left thumb amputation and a left middle finger fracture.",0
"An employee was on a pump jack scaffold installing siding on a residential home using a nail gun. A nail from the gun bounced off the wall and hit the employee in the eye. The nail got stuck in his eye, and he was hospitalized for surgery.",1
"An employee was shoveling potatoes into the waste bin on the flavor line when he slipped backwards and struck his head on the concrete floor, getting knocked unconscious. His left foot struck the waste tote, resulting in a sprained ankle.",1
An employee sustained a fingertip amputation when a manhole caught his finger between the lid and ground.,0
An employee dropped a grinder screw on the third and fourth metatarsals of his right foot.,1
"An employee stood from a kneeling position; his knees locked, causing him to fall to the floor.",1
"An amputation injury occurred on June 4, 2015, to a temporary employee working in the Forming Department.",0
"On or about June 5, 2015, an employee working with waste cement drums felt light-headed and was hospitalized.",1
An employee was inspecting a roof when he stumbled and fell 15 feet through a skylight.,1
An employee exited a vehicle in the Tyco maintenance area and was struck by a Tyco mechanic driving a second vehicle in the area.,1
An employee bending down to count snow blades was struck by a forklift being reversed by a coworker. The employee's leg got caught in the forklift's wheel well.,1
An employee experienced a hand injury on or around 6/5/2015 while operating a CNC machine. The machine conveyors were inadequately guarded at the time.,1
"An employee was working on a baker's scaffold located under some pipes. While accessing the scaffold, he hit his head on a pipe and fell approximately 6 feet.",1
An employee was removing a ladder from the top of a work van when he lost his balance and fell.,1
"An employee was bitten by a cat on her left thumb on Friday, June 5, 2015, at around 10 AM.  The thumb later swelled, requiring hospitalization and antibiotic IV treatment.",1
"An employee slipped and fell on mud while walking on a steel road plate, breaking his hip.",1
"A beam was being loaded onto a flatbed truck. When the beam was being placed onto the flatbed, the wood and entire deck collapsed, causing the beam to shift. The concrete fell on the employee's left small toe; surgery had to be performed.",1
"An employee dropped steel he was carrying. The steel struck the employee's left bicep, cutting an artery. The employee was hospitalized and required surgery to repair the artery.",1
An employee slipped on a wet floor and received knee injuries. ,1
"An employee was pulled off of the drill floor by a tugger line. The employee was standing behind a safety gate holding the hoist line to put tension on it so it would not get tangled in the hoist drum. Something made the line jerk; the employee did not let go and was pulled over the safety gate, sliding down what the employer called a beaver slide. He was hospitalized to repair his badly damaged hand. He also had 23 stitches put in his head and three fractured vertebrae.",1
An employee driving a forklift sustained a crushed finger/partial amputation when the employee's finger got caught between the forklift and a storage rack.,0
An employee was shutting down a piece of equipment when his fingertip got caught in a pulley.  The employee received a partial amputation of the right middle finger.,1
An employee's left pinky finger was amputated while operating the omasum saw in the menudo room.,0
An employee received electrical burns from an arc blast at a well site while working on pump service.,1
"An employee was injured while troubleshooting a stacker machine. He fell and his left hand entered the press cavity on an 800-ton press, injuring the third and fourth fingers on his right hand.",1
"An employee on duty after hours went out to close the gates. He lost his grip and fell back, striking his head on the pavement.",1
An employee amputated their right index finger while using a two-button pedestal welder.,0
"An employee was operating a lathe machine to bore a pipe. The employee went to extract metal shavings inside of the pipe when his right hand got caught in a pinch point. He sustained broken bones in his right hand, severed tendons in the right middle and index fingers, and skin removal on the top of his  right hand, requiring hospitalization.",1
An employee fell and broke an elbow in the office hallway.,1
"An employee at a service call for a commercial building was in the attic when he fell through the ceiling and landed on the floor, suffering a fractured right pelvic bone and left wrist, a contusion on the right jaw, and a concussion.",1
"An employee was driving a John Deere Gator truck on a gravel road at the worksite while holding a spray wand, which was attached to the 25-gallon spray tank. As she curbed to the right, she did not realize that the hose unraveled and caught the tires, causing the wand to move and strike her right eye. This resulted in the loss of an eye.",0
An employee was working on a molding machine that was alarming. The machine was not locked out at the time. The employee's hands were in the machine when the molds closed on his finger. Half of the first joint of his right ring finger (including the nail) was amputated at the hospital.,0
"An employee was putting chutes back into a holder when the edge of the chute got caught on the mixer drum. The drum pushed the chute into a bracket, catching the employee's fingers between the chute and drum. His finger was amputated.",1
"An employee was operating a lift on the back of a truck. When he reached for a chain that had fallen, the ramp came down on his hand and severed his right middle and ring fingers.",0
"An employee was operating a walkie rider (electric pallet jack) after staging two pallets. A forklift clipped the walkie, lacerating his foot and toe.",1
An employee tore the tendon in his left arm while replacing a hydraulic pump on a blow molding machine.,1
"An employee was climbing down a ladder while carrying a compressor. He fell, and his right-hand ring finger got caught and amputated.",0
An employee was injured in a motor vehicle accident when he rear-ended another truck.  The employee was hospitalized with potential fractures.,1
"On June 5, 2015, an employee descending a fixed, vertical ladder fell approximately 20 feet to the work floor below.",1
"On or about June 5, 2015, at 4:45 a.m., an employee was replacing a gasket in the hot water line. As he disconnected the hose, hot water doused his lower left leg, resulting in second degree burns and hospitalization. The line was not drained of water at the time of the incident.",1
"An employee installing solar panels fell from the roof to the garage, fracturing a foot.",1
An employee was responding to an emergency medical call for a near drowning. The employee had to carry equipment about 1/4 mile through tall grass to get to the location. The employee had performed emergency medical treatment and then experienced lightheadedness and shortness of breath. The employee was treated in the emergency room and admitted for observation.,1
"An employee was working on an air conditioner to reset a breaker. The employee reached for a tool box on a pedestal table, which kicked out and away from the employee, causing the employee to fall to the ground and sustain an injury.",1
"On June 5, 2015, an employee using a press reached for a part; the press came down on his left hand, amputating three fingers above the knuckles.",1
"On June 5, 2015, at approximately 11:45 a.m., an employee was working with blenders that are used to grind meat. An opening on the bottom of the grinder allows ground meat to fall into a buggy. The employee reached to remove a small portion of meat and his left hand made contact with an energized, rotating auger.",0
An employee got dizzy and fell and was hospitalized for fractured ribs.,1
An employee was pushing a catwalk out of the paint booth. The catwalk caught on an unknown object. He tried to keep pushing the catwalk forward when he fell over the push bar and hit his forehead on the catwalk. He continued falling over the bar and landed on the floor. He was hospitalized for treatment.,1
An employee fell 3.5 feet while welding a digester lid and broke his leg. He was hospitalized.,1
"An employee was using a large wrench to tighten a bore on a boring pipeline.  When he finished, he gave the all clear to start the boring. The pipe wrench was not removed from the bore; it swung around and struck him on his left-hand pinky finger, amputating the fingertip.",0
"An employee was hospitalized after feeling a tingling sensation in her leg, which was due to a herniated disk in her back.  Earlier in her shift, the employee had slipped on some moisture on the floor, but caught herself before falling.",1
An employee was towing baggage carts back to the bag room from the ramp area next to E-11. He applied the brake as he entered the bag room.  The cart jack-knifed and pinned his left foot between the tug and the cart. He fractured his big toe and a bone in his heel.,1
"An employee was helping a tractor trailer driver restack plywood sheets when the skid they were on shifted or tipped over. In the back of the trailer, the plywood shifted and struck the employee, pinning his arm between the plywood sheets and the forward wall of the trailer. He fractured his left humerus and required surgery.",1
"On June 06, 2015, at approximately 8:45 p.m., an employee was struck on the right leg by a rubber discharge hose that had been disconnected on one end after the pump was engaged by the equipment operator.",1
"An employee fell from a ladder and sustained a fractured leg, requiring hospitalization and surgery.",1
"Employees in the rail welding area were backing up a conveyor to remove an overload caused by too many pieces of curved strands. The injured employee's hand got caught between two sections of rail, amputating some of the flesh on the right ring finger. There was no bone loss.",0
"An employee was moving a rolling milk cart when it tipped over. He tried to stop it from falling and it fell on him, breaking his femur and requiring surgery.",1
"An employee was cleaning a ribbon blender. He had the lid open, thus disengaging the interlock switch and disabling the rotating paddles.  After he finished cleaning it, he closed the lid. The blender has a discharge hole at the bottom; unaware that the paddles in the blender were still rotating at a slow rate, the employee reached up through the discharge hole. The paddle amputated the tip of his index finger.",0
An employee was moving clothes (dresses) from one rack to another rack on the sales floor when she slipped. She required surgery for a broken femur.,1
An employee operating a stand-up forklift was backing up when his right foot got caught between the forklift he was operating and a parked forklift.,1
"On June 6, 2015, an employee accessing paper goods caught her foot on a pallet. She lost her balance and fell, fracturing her hip.",1
An employee's hand was crushed by a skidsteer rock bucket as it was being taken off of a pallet.,1
An employee injured his/her back while stocking kitchen materials on a shelf.,1
An employee's right ring fingertip was amputated while operating a pallet assembly machine.,0
"An employee was removing a twist lock from a 40-foot refrigerated container (40,000 pounds). The employee's right hand got caught between the chassis and container, fracturing the three middle fingers. The employee was hospitalized.",1
An employee was carrying a pan of hot brisket drippings towards the dishwasher of the meat area and fell while holding the pan of drippings.  The hot drippings spilled and splashed onto the employee.  The employee received serious burns and was hospitalized.,1
The end of a maintenance employee's left thumb was crushed in the pinch point of a belt and pulley while he was manually pulling on the belt to rotate the parts of a locked-out production machine.,0
An employee was shocked by 480 volts when his left arm made contact with an energized blower/vacuum unit while removing water from under the blower. He was hospitalized.,1
"On Sunday June 7, 2015, at approximately 4:55 p.m., an employee on the production floor was operating a crimper machine, which is a wire connector crimping machine operated by an unguarded foot pedal. The injured employee was hand-feeding wire pieces into the point of operation when she inadvertently pressed a foot pedal with her right-hand index finger, resulting in an amputation. The point of operation was unguarded at the time.",0
"An employee was going to brush meat off of the boudin grinder when he got his finger caught in the extruder blades, amputating his fingertip.",0
An employee was closing a gate when the gate became unhinged and fell on him. He was hospitalized and underwent surgery for a fractured pelvis and dislocated hip.,1
An employee was removing an electrical cord from a water tower when he came into contact with overhead power lines and received electrical burns to his hands.,1
"An employee fell while sitting on a stool, struck her head on the ground, and was hospitalized.",1
The end of an employee's finger was amputated while operating a Patti-O-Matic burger making machine. The guard was not in place at the time.,0
An employee received second degree burns to his left palm and third degree burns to his left wrist while swabbing machine oil across the mold in a mold machine.  The mold machine was located in the forming department.,1
"On 6/8/15, an employee received an amputation to the left thumb while operating a band saw. ",0
An employee attempted to free a mail jam in a mail sorting device when the machine amputated his finger.,1
"An employee was spot welding bolts to a piece of metal when his right index fingertip was amputated, requiring hospitalization.",1
An employee fell approximately 20 feet to the ground below. The employee was hospitalized with several broken bones and a head injury.,1
An employee fell about 8 feet from an A-frame ladder.,1
"An employee shot himself in the leg with a cattle knock gun, breaking his femur.",1
"At a filler machine, an employee who was putting lids on ice cream buckets was injured and received a right thumb amputation.",0
"On 6/6/15, an employee was bitten on the left hand by a stray dog while delivering mail. The bite later became infected and required hospitalization.",1
"The right index finger of an employee working on a plant potting assembly line got caught between a drive chain for a carousel and a metal guide wheel, resulting in an amputation down to the first knuckle from the fingertip.",0
"An employee was manually moving the belt and gears of a high pressure pump. The pump was locked out and tagged out at the time. The employee's right pinky finger got caught in the belt. When the employee pulled his finger out, he lost his fingertip barely down to the bone.",1
An employee fell while walking in stilts and carrying snips that punctured the employee's abdomen. The employee was hospitalized.,1
"An employee was positioning himself on the aerial bucket before tree trimming when the aerial lift lost hydraulic pressure and caused the upper boom to swing down. This caused the employee to be ejected from the bucket while still attached to the bucket with his harness and lanyard. He fell down 28 feet, landing on a nearby fence and hitting his head on the fence or ground. He was hospitalized, where doctors found bleeding in the brain.",1
An employee was hospitalized when his scissor lift tipped over.,1
"Employees were using a 100-ton hydraulic press to separate a bearing from a drive shaft.  While removing the bearing, the outer bearing race of a ball bearing assembly failed under pressure from the hydraulic press. The part struck the employees.",1
"On June 8, 2015, at approximately 2:30 p.m., an employee was hospitalized for multiple head injuries after suffering a fall. The employee was delivering seven cases of milk from the side door of a freightliner truck with an 18' refrigerated body. The employee was found lying on the surface of the blacktop parking lot.",1
"An employee placed a 4-foot long piece of metal into the passenger seat of a golf cart. The piece of metal hit the gas pedal on the golf cart and the golf cart lurched forward, hitting the employee on the left leg below the knee.",1
"An employee hit a rack with a forklift during training, breaking his leg.",1
"An employee was using a rescue saw to cut a granite curb when it kicked back, hitting him in the face.",1
An employee struck himself in the head with a hammer.,1
"A maintenance employee got snagged by a belt and was pulled into a machine, seriously injuring his arm and requiring hospitalization.",1
"An employee was looking into the pilger machine when the hood fell, striking the employee on the back.",1
"An employee getting change out of a safe closed the safe door on her right thumb. Her right thumb was crushed, and the entire nail bed came off.",0
"An employee was carrying a 4x6-feet wooden beam when he lost his footing and slipped and fell, pinching his right index finger between a beam corner and the 4x6 beam.",0
"An employee was working on a ""Right of Way"" on 6/8/2015. He forgot an instrument and got on an ATV to go back for it. While passing the ""Right of Way"" on a switchback, he hit something (presumably a rock or waterbar) and was thrown from the ATV at approximately 9 a.m. He suffered injuries to the shoulder blades, collarbone, and three ribs (broken) and required hospitalization.",1
An employee was injured during concrete hammer chipping operations when a concrete piece flew off and caused a contusion on the employee's right forearm. The employee was hospitalized.,1
An employee was struck by another employee operating a pallet jack within the aisles of the dock where both employees were working.,1
"An employee was administering medications to the cows when a cow moved into him and hit his lower right leg, causing a fracture. The employee was hospitalized overnight.",1
"An employee slipped and fell at the Atlanta airport, under Concourse E, Apron level, at the international baggage line. The employee slipped on black dust and broke his hip as a result of the fall.",1
"An employee was polishing a rotating part in a CNC lathe. The glove he was wearing got caught, amputating his middle finger, lacerating his ring finger, and breaking his pinky finger. He was hospitalized.",1
"An employee hooked an extension ladder onto a main overhead cable line and climbed up the ladder. His  task was to replace a secondary cable going from the main cable over the sidewalk to a house. When he cut the old cable, which had tension in it, the cable swung, hit the ladder, and knocked the employee off the ladder to the sidewalk 18 feet below.  The employee was wearing a safety belt and lanyard. The lanyard was not attached to the main cable at the time of the incident.",1
"On 6/9/15, an employee received finger amputations to both hands while operating a crimp machine in set up mode.",1
"An employee was working from a telephone pole when his gear lost tension and he fell, striking the top of a chain link fence. He severely injured his back. Adequate fall protection had not been provided at the time of the incident.",1
An employee lifted a cover over a crumble roller and reached between the grates to clean a clump of feed off of the grates. The employee's hand got caught between the rolls under the grates.,1
An employee fell off of a 6-foot ladder and hit his elbow.,1
"An employee folding a piece of paper while walking to the pick area stepped on a plastic clothes clip, slipped, and fell to the concrete floor.",1
"An employee was driving a golf cart on the course on 6/9/2015 at ~8:50 AM, when it is presumed that a wasp or bee flew into his face. The employee received a bite injury on his left cheek that initiated an allergic reaction requiring in-patient hospitalization.",1
An employee was exposed to an inhalation hazard from the oil mist used in drilling operations.,1
An employee fell and broke both wrists while on a skating field trip.,1
An employee was attempting to lift a slurry tank to move with a pallet jack. The tank rolled catching the employee's right middle finger between the slurry tank cribbing and the asphalt ground resulting in an amputation to at least the first knuckle.,0
"On June 9, 2015, an employee wearing flame resistant clothing was retrieving samples of hot, 400 degrees F asphalt from a controlled sample point when he was splashed/sprayed by pressurized hot asphalt. He received second degree burns to his head, neck, chest, and both arms. He also received first and second degree burns on the right side of his face.",1
An employee was performing duties related to lawn care when he was overcome by heat. The employee complained of a stomach ache and started vomiting. EMT services were called and the employee was taken to a local hospital where he was treated and kept overnight for observation.,1
"An employee was loading material onto a rack in the bed of a pickup truck, and was in the process of tightening a ratchet strap to secure the load. As the employee was tightening the ratchet strap, the employee fell and struck his torso on the opposite side of the bed, breaking five ribs. The employee was hospitalized overnight.",1
"An employee stepped off of his Jung Heinrich stock picker in aisle 30 of the general warehouse area at approximately 10 AM.  The lift was not fully lowered to the floor at the time. He fell 2 to 2.5 feet to the floor, breaking his right hip and requiring hospitalization.",1
"On 6/9/15, an employee was hospitalized due to a finger injury caused by the cleaning of a label press.",1
"An employee was checking cooler chillers. When he passed the chiller blower, the chiller blower's fan sucked his left hand in, cutting off the tip of his index finger. The blower was unguarded at the time because the guard had fallen off.",0
"On or about June 9, 2015, an employee went up on an aerial lift to work on a motor. The belt was still rotating at the time, and it amputated his right index fingertip.",0
"On or about June 9, 2015, an employee was injured when a forklift truck backed into and pinned the employee between the wall and a trailer. The employee sustained a right hip injury and broken pelvis.",1
"An employee was using a stand-on, 36-inch Stander Lawn Mower Machine. As he was operating the machine, he dismounted it and the machine ran over one of his feet. Several of his toes were amputated. The employee was wearing steel-toed shoes at the time.",1
"An employee was making sure that no one was in the way of the forklift as the forklift driver was lowering a 20 ft long metal beam onto the ground. The employee then pulled the hand grinder's electrical cord that was on the ground so that it wouldn't get crushed by the metal beam, but instead his right index finger was crushed by the beam resulting in the amputation of his right index finger from the second knuckle.",0
An employee injured his right thumb below the nail area while operating a jet horizontal band saw.,0
"An employee was installing solar panels on a residential roof at 33 Wilson Drive Babylon, New York 94402. The employee fell approximately 7 feet to the ground while descending a ladder and injured the right ankle. The employee was hospitalized for treatment.",1
An employee's hand got caught while trying to clear a jam in a baler.,1
An employee walking through the plant stepped in a shallow trench that was missing a trench cover. The trench contained hot water.,1
"An employee fractured his right femur when he tripped on the platform lip while exiting an electrical pallet jack. At the time, he was trying to move away from a falling pallet overhead. He was hospitalized.",1
"An employee was pressing fenders on a foot-operated punch press. A thin layer of nylon was placed inside the fender before pressing, but it moved out of place. The employee reached to adjust the piece of nylon and stepped on the foot pedal, causing the press to come down on his left arm.",1
"On June 9, 2015, an employee's finger got caught between a dock plate and trailer while attempting to position the dock plate beneath a rear pallet. Her fingertip was severely injured, eventually requiring surgical amputation.",0
"An employee was struck by a reversing forklift, breaking the employee's leg.",1
"On June 9, 2015, an employee's hand was crushed while operating a laminator. The employee was hospitalized. The machine guard was bypassed at the time of the incident.",1
"An employee was using a handheld band saw to cut an old thread pipe. He held the pipe with his left hand while cutting with the right. When he cut through the pipe, he also cut his left index fingertip.",1
"An employee was waiting for an elevator. The elevator stopped higher than floor level. When the employee entered the elevator, she tripped and fractured her leg.",1
"An employee was placing a 450 lb. part on a work table, using a 1-ton hoist and a hook, when the part came loose from the hook and partially fell onto the employee's hand. The employee suffered vascular damage to the left middle and ring fingers, requiring surgery.",1
A warehouse employee climbed on the racks and fell approximately 20 feet to the floor.,1
"On 06-09-2015, an employee was hospitalized after being found unconscious near the work station. Possibly heat related.",1
"An employee was placing a chock onto pipe to stabilize it on the conveyor. The employee tried to go over the machinery instead of around it, and his right thigh got caught by the moving conveyor machinery. He sustained a severe laceration and torn muscle, requiring surgery.",1
"An employee was on a train car in the yard helping the mobile crane crew unload long pieces of steel from the train car. The employee had just hooked the crane hook to a piece of metal and the operator was tightening the hook when another piece of metal began to fall. The employee jumped down and the steel landed on his right hand, amputating his ring finger and pinky tip.",0
"On June 9, 2015, an employee was running on the side of a waste collection truck as the truck backed down a dead-end street. As the truck was moving, the employee attempted to mount the steps located on the rear. He missed the step and fell. The right rear outside tire ran over his lower left leg, breaking it. The employee was hospitalized.",1
An employee was walking down the hallway and around a corner when her knee gave out.  She fell and broke her left femur bone.,1
"An employee was loading a well with hot oil. The employee had turned valves off and started to fill the well. The pressure in the tank filled due to the hot oil. The pressure release valve released flammable vapors and/or gases. The flammable vapors and/or gases ignited, burning the employee's face (cheeks and ears). The employee was wearing flame resistant clothing, a hard hat, and safety glasses at the time.",1
An employee partially amputated his right hand while operating a Steinemann printing press.,1
An employee slipped off a ladder and fractured vertebrae.,1
An employee suffered a partial amputation of the left ring finger while checking a hoist in the maintenance department.,0
An employee was discovered sitting in his car just after break. The employee was unresponsive and diagnosed with severe dehydration possibly due to overheating.,1
An employee was operating a double pallet jack and wanted to move it in reverse. He put the pallet jack in the forward gear instead of reverse and became pinned between the pallet jack and a spur.,1
"The injured employee was building a scaffold. While constructing the scaffold, the leg of the scaffold hit a valve (located above)releasing sulfuric acid. He suffered burns on the left side of his body and was hospitalized.",1
An employee in the meat department cut his finger while slicing meat with a knife.,0
An employee was struck by an electrical pole as it was being transferred to the ground by an excavator with a chain.,1
An employee was working from an extension ladder when he fell breaking his right ankle.,1
"On June 10, 2015, an employee was operating a UTV on the range when the UTV hit a patch of soft sand and flipped. The employee fell out of the UTV, landed on an ammunition can, and injured his back.",1
An employee was loading a transformer into the bucket of a Bobcat from the side. The Bobcat operator did not see him when he moved the bucket and caught the employee's right pinky finger in the joint/hinge where the bucket is attached and amputated the fingertip.,0
An employee removed a rubber boot from a rail car and used his hand to push carbon back into the auger below the rail car.  The tip of the employee's left index finger was caught in the auger.,0
An employee operating a roller jumped off the machine when it began to tilt.  The employee was hospitalized with injuries to his left arm and shoulder.,1
An employee was injured when she tripped over a plastic band and fell to the floor.,1
"An employee was stepped on by a physical therapy patient, resulting in a fractured left foot.",1
A parcel driver was hospitalized due to dehydration.,1
"An employee was delivering two containers of pesticide to a customer's farm. While walking to his pickup, he slipped and fell to the ground. It was a rainy evening and the ground was wet and muddy.",1
"An employee was contracted to perform work at another facility to relocate a molding machine.  Normal procedure is to bring the machine within about one inch of the leveling pad so that a bolt can be hand placed to align with the hole on the machine that is being bolted down (to conclude the relocation of the machine). While using a hydraulic jack to perform this task, the hydraulic jack ""failed"" as the machine came down on the employee's left hand crushing it in 3-4 separate places.",1
"An employee was assisting offloading truck. A supervisor noticed the employee was sweating excessively and looked pale. The supervisor informed the employee to sit inside the air-conditioned truck and cool off. After a period of time the employee came out of the truck and attempted to continue to work. The employee complained that his hands were cramping. The employee was taken to the hospital. At the hospital, it was noted that the employee had high CK levels possibly due to prior heat illness.",1
A retail associate was walking to the front of the store through clothing racks.  She tripped on a comforter that was left on the floor by a customer and fell.  She fractured her right femur and required surgery to repair the fracture.,1
"A maintenance employee was struck by plastic tub lids that fell from a pallet raised on the forks of a stationary forklift, knocking him to the ground, at which time he struck his head, resulting in head and neck injuries requiring hospitalization.",1
An employee suffered a finger amputation during machine maintenance.,0
"An employee was performing normal maintenance on a gluer machine, when the employee slipped and came into contact with the gluer machine resulting in a finger amputation.",0
An employee was hospitalized due to a chemical burn to the tip of the left index finger.,1
"An employee was cutting the banding on a bundle of 5 3/4"" steel on dual hoists and a basket hitch on each end using a manual banding cutter and crushed the tip of his pinky finger between two pieces of steel, resulting in the amputation of his fingertip. He was wearing cut level 4 gloves and sleeves, hardhat, safety glasses + side shield, and steel-toed metatarsal boots.",0
An employee working on a road construction project cleaning up after concrete chipping was struck by the street sweeper and suffered a broken sacrum.,1
An employee was hospitalized after hurting his back while lifting boxes from a dolly.,1
An employee suffered a fractured femur when he fell from a scaffold after the spreader beam that he had tied his fall protection to fell to the ground.,1
An employee experienced back spasms and back strain while loading a hand truck with bottles of water.,1
An employee received an amputation injury to his left middle finger while cleaning a water meter that was on a conveyor when his finger was caught in the power-driven roller on the conveyor.,0
An inmate working in the building trade program sustained an amputation of two fingers while using a table router. The inmate was hand feeding a wooden board through the router and his fingers contacted the rotating router blade.,0
An employee sustained a finger injury when it was caught in a chain hoist.,0
An employee was spotting for a crane when the employee's fingers got caught in the winch line.,0
"An employee broke his leg above the foot when it was pinned between forklift forks and material. He had started the forklift as he was standing beside it and raised the forks a few inches off the ground. He then went in front of the forklift to adjust the distance of the forks. While he was talking with another employee, the forklift started rolling forward. The emergency brakes were not applied at the time.",1
"An employee was instructing other employees regarding the procedure on how to remove a 36-inch diameter pipe from within a larger diameter pipe. The pipe began moving too fast and rolled up onto his right leg, pinning him and causing his leg to break. He underwent surgery to repair damage and reset the bone.",1
An employee drove a forklift off a trailer.,1
An employee suffered an amputation to the 3rd and 4th fingertips on his left hand. He was operating a jib crane to raise the door of a blowout preventer when an approximately 150 piston slid out of it striking his hand.,0
"An employee was moving a steel pipe with a bobcat. The employee shook the bobcat bucket to dislodge the pipe and began to drive away. The pipe was not dislodged and it began swinging and struck another employee in the lower left leg, breaking the leg and resulting in an in-patient hospitalization.",1
An employee walked close to an elevator opening. He rested his hand on the barricade (chain) that didn't hold his weight. He fell twelve feet resulting in a non-displaced fracture of his lower back and a possible fracture of his right foot.,1
An employee was using a vacuum pressure hose to clean out water from a sump hole and the suction of the vacuum hose caught the employee's left arm. The resulting arm injury needed a surgical pressure release.,1
"On or about 6/11/2015, at 8:55 a.m., an employee working with a roof cutter attempted to seal a hole that was located on the inside panel of the machine. The employee reached into the machine and his glove got caught in the blade, amputating his ring fingertip and lacerating his middle finger. The machine was running at the time of the incident.",0
"An employee was walking and was run over by the forklift. The employee suffered broken ribs, a collapsed left lung, broken vertebra, and a toe amputation.",0
"An employee was in the back of a trailer attempting to remove product when he either tripped or his foot caught on the trailer, resulting in him falling to the pavement and hitting his head. The employee suffered a closed head skull fracture.",1
An employee was hospitalized due to experiencing a heat related illness.,1
An employee was manually feeding tubes into the tube straightener in the warehouse area with two other employees. The employee was feeding a square tube when his left thumb tip was caught between the tube and a roller.,1
An employee was closing the injection molding door when his left hand glove along with the tip of his middle finger got caught between the door and the frame of the injection molding machine. The employee jerked his hand out and amputated his left middle fingertip.,1
"Two employees were attempting to place a rotor on a pedestal stand while using a forklift and synthetic web sling. The sling slid off the rotor, causing the rotor to fall to the ground and hit an employee's left foot.  The employee was hospitalized afterwards for foot surgery.",1
An employee was injured while assisting to load a beam onto a flatbed truck. The beam tipped on its side and struck the injured employee.,1
An employee suffered a serious injury resulting in hospitalization when a steel beam being moved on a crane knocked him off the extension ladder he was on. ,1
"An employee operating the resaw was changing the thickness and making adjustments to the line bar. The machine was accidentally started, and his left foot got caught in the chain and sprocket, breaking a bone in the big toe of his left foot.",1
An employee was hospitalized after falling 20-25 feet through a roof skylight.,1
"On or about June 11, 2015, an employee sustained an amputation to the tip of the left index finger when working with a Banbury mixer in the quality control lab.",0
"An employee went to grab a board before it slid down the chute at the output side of the re-rip saw. He contacted the flat chain that was moving, and his right ring fingertip was cut off. There was no bone loss or nail loss.",0
"On or about June 11, 2015, an employee sustained an amputation to the first joint of the left middle finger when cutting parts on a bandsaw. ",0
An employee was injured on the job while operating a press; his thumb was amputated.,1
A call from Monroe Community College early in the morning of 6/11/15 said that there was a power outage. Employees were sent on site to restore power. The injured employee inadvertently moved a ground wire in proximity to an energized part and an arc flash occurred. He received second degree burns to his hand and first degree burns to his arm and face.,1
An employee was struck by material handling equipment (reach truck). He was selecting products from the warehouse racking; the reach truck operator didn't see him and struck him.,1
"On or about 6/11/15, an employee's left middle fingertip was amputated by a moving chain conveyor.",0
"On Thursday, 06/11/2015 at 2:15 PM an employee at the Hampton VA Medical Center was injured on the job in the Main Kitchen (Building 116/Room 103) of the Nutrition & Food Services Department (N&FS). The employee had finished with food production efforts for the day and began daily sanitation/clean-up efforts. The employee was responsible for cleaning and sanitizing a 100-gallon kettle.  At the time of the injury, the equipment was left in the ""on"" position; the paddles were rotating; and the probe had been removed from the bottom of the kettle thereby creating a small circular opening. The employee was cleaning out the circular opening (finger in upright position through the hole) when the paddle struck his finger. The paddle severed 1/2 inch of his middle finger on his left hand.  Bone was visible. The employee was rushed to the Emergency Room for re-attachment efforts.",0
An employee was walking in the turbine floor of the boiler area and struck his head on an overhanging pipe and fell to the floor breaking his right femur.,1
"The injured employee was a spotter for a broom tractor. The broom tractor operator was backing up and lost sight of the employee. The employee was struck by the broom tractor resulting in a concussion, a fractured skull and facial lacerations.",1
"A crew was preparing to pave a road. While warming up, the rear of the paving machine caught on fire and burned the employee sitting in the seat.",1
"The injured employee was chasing down someone who was suspected of trying to abduct and assault a client's employee. He and a coworker accosted the suspect, who drew a knife and struck the injured employee on his left shin. The injured employee was hospitalized.",1
"An employee at South Des Moines Station fell while delivering mail. He was walking down a slight grade when he slipped and fell on his ankle, breaking it in two places. He required surgery.",1
An employee sustained a hernia while loading a piece of lumber onto a molding machine and was hospitalized.,1
An employee was hospitalized after he cut his leg with a powered hand saw.,1
Employees were setting up bleachers for an event. One of the employees fell from the bleachers and was injured.,1
An employee was admitted to the hospital after receiving a laceration from a concrete saw.,1
"On June 11, 2015, an employee was standing on a forklift changing out the seals on the mast. The employee stepped backward, striking the level that lowers the mast with his back. The employee was pinned under the mast and fractured the lumbar region of his back.",1
"An employee sat down on a large rock during a nature hike to take a picture with youth campers. The rock broke away from the ground and the employee slid down the hill with the rock, getting pinned between the rock and hillside. The employee was hospitalized with a fractured pelvis and hip injuries.",1
"An employee was cleaning a running conveyor system with a compressed air wand when the wand became stuck in the conveyor system at a junction between a section of roller conveyors and a belt conveyor.  While trying to free the compressed air wand, the employee's right middle finger either got caught in the conveyor or caught by the compressed air wand, resulting in a partial amputation of the right middle finger. The injury occurred above the right knuckle and involved bone. The employee required surgery to reattach the finger.",0
"In the power press department, an employee crushed four fingers on his right hand while feeding a blade into the press to make two holes in the blade.",1
"An employee was splashed by hot liquid rubber that he was carrying in a bucket, requiring hospitalization for third degree burns.",1
An employee got dehydrated and was injured when he fainted and hit his head. He was hospitalized and received stitches in his head.,1
An employee was hospitalized when she was struck in the arm by a nail from a pneumatic nail gun.,1
An employee was weighing fourteen cattle one at a time. Two cows tried to get on the scale at same time. The employee tried to back one cow off the scale and the other cow ran away. The employee was either knocked unconscious or stepped on by the cattle causing injury. There were no witnesses to the incident.,1
An employee was monitoring a patient when the patient became agitated.  The patient struck the employee in both of her arms.  The employee fell to the ground and injured her left knee and right shoulder.  ,1
"An employee sustained a left-hand, middle fingertip amputation while starting a filler lineup.",1
An employee was walking in front of an electric pallet jack. The pallet jack ran over the back of his foot when the employee stopped suddenly.,1
"An employee who had climbed a ladder to service communication equipment on a pole 18' above the ground was attacked by wasps. During his rapid descent down the ladder, he lost his footing and fell to the ground, resulting in a broken leg and hospitalization.",1
"An employee was injured when a stack of steel beams fell and pinned him, striking him in the legs.",1
An employee's left foot got pinned between the fork truck he was operating and a wire basket. He sustained an amputation of two toes and a broken big toe.,1
"A maintenance employee was storing the extruder track that is used to move the extruder to and from the die. He was wearing a cut resistant glove that caught on a bur. As he was sliding the track into the storage area, his finger got caught between the sliding rack and storage area.",0
"An employee was performing work at a transformer.  The line the employee was going to work on was de-energized and grounded. The employee came into contact with the energized line, which resulted in burns to both hands.",1
An employee fell 10 feet from an aluminum ladder while repairing leaks inside of a ground water storage tank.,1
"An employee was cleaning bands on an auto booth paint machine when his right index finger got caught between the band and the rollers, causing an amputation.",0
"An employee operating a press brake suffered amputations of his right pinky, middle, and ring fingers when his right hand got caught in the machine. He was hospitalized and received surgery.",1
"A ""Yard Horse"" vehicle with a shipping container on board was moving in the yard and accidentally bumped into a rail car.  An employee was standing on that railroad car, locking down containers.  The ""bump"" caused the employee to fall off the railroad car, and he was caught in a pinch point between the railroad car and the shipping container on board the ""Yard Horse."" He suffered a crushing laceration to the back of his right leg.",1
"While walking on a sidewalk near construction, an employee tripped and fell, breaking their elbow.",1
"Approximately 0.25 inches of an employee's left-hand index fingertip was amputated by a manual paper cutter, requiring surgery.",0
An employee was hospitalized after getting his feet caught in a machine.,1
An employee was traveling west bound on Ross Ave and proceeded into an intersection on a green light. A car ran a red light and struck the employee on the left side.,1
An employee was bitten by a snake when he stuck his hand inside a cross connect box. The employee did not see the snake inside the cross connect box when he opened the door. ,1
"On Friday, June 12, 2015, an employee sustained a puncture/laceration while working the grill in the cafeteria at Norwalk Hospital. The employee was using a boning knife to slice a roll/bread that had not been adequately pre-sliced. He held the roll in his right hand and the knife in his left hand. While attempting to cut the roll, he punctured/lacerated his right forearm.",1
An employee in the warehouse fell from a pallet tier that was approximately 7 feet high and fractured their left ankle.,1
"On June 12, 2015, an employee exposed to heat stress hazards was hospitalized after he went home with heat stress symptoms.",1
An employee fell from a 5-foot scaffold.,1
An employee was burned on the leg while cutting rebar.,1
An employee's right foot was run over and de-gloved by a forklift being driven by another operator.,1
An employee checking an electrical panel came into contact with a live wire and was electrocuted.,1
"An employee was throwing away a piece of pipe that was oddly shaped and heavier at the base. He threw it into the scrap metal trash bin and it rebounded against his middle finger, still placed against the edge of the trash bin, amputating his right middle fingertip from the top joint down.",0
"An employee returning to the City Gate facility tripped on an uneven sidewalk, broke her arm, and injured her back, requiring hospitalization.",1
"An employee was hospitalized following a workplace accident that involved contact with chemicals.  While opening a container of pressurized ammonia, the chemical released into the employee's face.  ",1
"An employee was cutting meat using a table saw (meat slicer) when the meat slipped from his grasp, causing his hand to contact the blade. His thumb and index finger were severed, causing amputation, and two other fingers were lacerated.",0
"An employee was removing a rod that holds the contacts inside of a metal box when his finger got caught between the rod and the box, amputating his right thumb.",0
An employee was spotting moving equipment when he noticed a piece of iron that was sticking out from the equipment. He reached up to swivel the iron when his finger got caught between the iron and the parked equipment.,0
"An employee was attempting to remove the chain from the bit of a barge transfer system when the transfer cable snapped up, pinning his right index finger between the bit and the chain. This action removed most of the fleshy tissue of his upper finger. He was hospitalized, and the remaining upper finger was medically amputated.",0
An employee was hospitalized after she slipped and fell on a plastic dough container while pushing a rolling cart. ,1
"On June 13, 2015, an employee was operating a stand-up mower. While going up an incline, he lost his balance and slipped off of the mower. He grabbed onto the handle, which made the mower go backwards, and his ankle went under the deck and was cut. He was hospitalized overnight and received ankle stitches.",1
"An employee fell from a second story balcony while trying to bend a rebar back in place. The rebar snapped, causing the employee to lose his balance and fall off the balcony to the ground.",1
An employee amputated the tip of his middle finger when his glove got caught in a conveyor.,0
"An employee was disconnecting a set of spreader bars from a crane while working on the dock.  During the process, an extension bar gained momentum and struck the employee, knocking the employee to the ground. The employee suffered a head injury and was hospitalized for testing, with results of intracranial bleeding.",1
"An employee had just started to weld on a broken Tigercat's knife when it immediately flashed, causing a fire. The employee received third degree burns from his waist down. Before welding, the employee poured water around his work location to prevent a forest fire.",1
"An employee was washing out the RS2 screw. While the employee's hand was in the RS2 screw, another employee activated/enabled the A station via the computer, causing the RS2 screw to turn. This action lacerated the employee's palm, severing the tendons. The RS2 screw was not locked out at the time of the accident.",1
"An employee's hand was crushed between a clamp and a frame while he was setting up to weld two steel strip ends together, resulting in multiple fractures, lacerations, and hospitalization.",1
"While cleaning a resident, an employee's leg got caught in a call light cord. The employee fell and fractured their shoulder.",1
"An employee was repairing a molding press when his right leg came in contact with a live conductor, causing him to experience loss of consciousness and burns due to electrocution. He was hospitalized for his injuries.",1
"An employee was helping a coworker move material from reprocessing to the film department, which involved attaching a 4-inch hose to a hopper. Once the hose is hooked up, material flows through a filtering system in the hopper. There is a rotary valve at the bottom of the filter.  The valve rotates and dumps waste into a container. The hopper was jammed or clogged up, so the employees tried to get it to work by cycling the power. The injured employee was going to feel around the rotary valve for the jam or clog when the rotary valve ""sucked his hand up"" into it and amputated the distal phalanx of the thumb.",1
An employee was servicing a tire when the equipment hub shattered and the mounted tire struck the employee on the left arm.,1
"On June 15, 2015, at approximately 4:40 PM, an employee cut off his left middle fingertip and cut the tendons in his left hand while using a band saw to cut pork. The employee was hospitalized overnight.",1
"An employee missed a ladder step and fell 6 to 12 feet, breaking a foot and injuring a shoulder.",1
"An employee was in the hallway when a patient ran up and began hitting her in the face. The patient then grabbed the employee's leg and pulled her into a room. The employee fell, injuring her elbow.",1
"At 4:45 p.m., on Monday, June 15, an employee was working on a metal frame near the paint booth. When he moved the frame to prepare for the next stage of work, a second frame fell from a stand onto his arm, lacerating his left bicep. He was hospitalized and underwent surgery.",1
"An employee in the meat market was using a band saw meat cutter. As he ran the meat across the cutter, his fingertip was cut off.",1
"On June 15, 2015, an employee was straightening boxes on a pallet and was struck by the forks of a powered industrial vehicle. The employee was hospitalized due to the injuries received.",1
"An employee, performing duties as a mail career, was hospitalized for dehydration due to heat stress.",1
An employee was assembling two pieces of sheet steel on a harvester when he slipped and one of sheets amputated his fingertip.,0
"An employee was chipping off hardened chemical residue from the interior walls of a tank.  Twenty minutes into the second 30-minute rotation, he got out of the tank complaining about drowsiness and a severe headache. He was hospitalized.",1
"On or about 6/15/15, an employee operating pipe bender machine was caught in the machine and amputated his left middle fingertip.",0
An employee sustained a left-hand middle finger amputation while operating a lift gate.,1
An employee in the production area was operating 60-ton press machine to form and bend metal parts. The movement of the machine amputated his pointer and middle fingertips on his left hand.,1
An employee lost a fingertip in a stationary bone saw blade.,0
"On or about 6/15/15, an employee's hand got pinched between the forklift roll cage and a spider coil, resulting in a pinky fingertip amputation and severe injury to the ring finger of the right hand.",1
"An employee was turning the corner while riding a PIV electric pallet lift.  The brakes failed, so the employee quickly fell from the PIV.  When he fell, his left foot was run over by a different PIV lift going in the opposite direction.  The employee's foot was smashed; he was hospitalized and had surgery.",1
An employee broke an ankle after falling off the step of a truck-mounted ladder.,1
"An employee fell about 8 feet from a one-story residential house when he stepped onto the ladder from the roof and lost his footing.  He fell onto the concrete and injured his heel, requiring hospitalization.",1
"Employees had removed the canopy top off a small 36"" excavator to get it through a doorway.  They were in the process of putting the canopy back on when it slipped and hit the safety lever, which activates the boom.  The boom swung around, and the excavator bucket struck the backside of the injured employee between his ribs and pelvis.  The bucket was constructed of sharp metal, which caused a severe cut that required stitches. The employee was hospitalized overnight for observation.",1
"An employee working in an airplane hanger from a 10' portable ladder fell and hit the ground, injuring his hip, wrist, and spine and requiring hospitalization.",1
"An employee was moving a pipe on a transporter. He was positioned backwards, and his foot went into a 0.5- to 1-inch access opening that connects transporters together.  There were screws missing from the access hatch, which moved the access plate and caused the employee to fall over the side of the transporter from a height of 4 feet, 4.5 inches to the ground. The employee landed on a board, breaking a leg and a rib on his right side.",1
"An employee was changing the tracks on a John Deere bobcat. As he turned the wheel, his finger got caught in the wrong place, snipping off the end of the left index finger.",1
"An employee was washing windows on a logging truck, missed a step, and fell.",1
"An employee was checking a leak on the roof. He fell through the roof (skylight) and ceiling (another 15 feet) to the ground for about 50 feet total. He was hospitalized for a dislocated shoulder, a cut on his left rib, and brain bleeding. He underwent surgery.",1
"While walking to his/her work station, an employee slipped and fell, sustaining a broken wrist.",1
An employee was working at an oil and gas lease site when he made contact with a 480 V transmission line while working between the distribution box and the well he was inspecting. The employee received third degree burns on his hands and back and was admitted to the hospital.,1
A Border Patrol Agent was bitten by a tick and eventually required hospitalization.,1
An employee was hospitalized due to an injury received to the rear of his left leg during the operation of a forklift. ,1
"An employee was unloading a HVAC condenser from a flat bed truck and his index finger was smashed between the condenser and the guardrail of the flat bed truck, causing a partial amputation.",0
An employee working from a ladder fell to the elevation below after the ladder tipped over.,1
"An employee was watching a surge pile in the staging area while supervising the work, when he was struck by a forklift that was loading out trucks in the vicinity. The employee's right leg and elbow were injured, resulting in surgery and hospitalization.",1
"An employee cleaning a radial arm saw received an amputation injury on June 16, 2015.",0
"An employee was removing a man hole cover when the cover slipped and smashed the employee's index finger, amputating the fingertip.",0
"An employee knocked a can of cooking spray into a deep fryer. The can of cooking spray exploded and the employee received 2nd and 3rd degree burns to his arms, chest, and face.",1
An employee was driving a pallet jack when he pressed the wrong direction on the machine and caught his fingers in between the pallet jack and a rack.,1
"An employee was working on the production floor and began experiencing heat illness related symptoms, including abdominal and muscle cramping as well as decreased sweating.  He was admitted and treated for heat exhaustion at the hospital.",1
"The injured employee and another worker were working at an elevation of 10 feet, 7 inches on top of a mezzanine while landing bundles of decking that were being  moved by a crane.  The bundle of decking had to be spun by the crane in order to be landed correctly. The employee lost his footing during this process and fell from the beam he was standing on.",1
An Aerotek temporary employee was attempting to clear a jam on compression molding machine number 4 when the machine cycled and amputated a portion of his right pointer finger.,0
"An employee was standing on a step ladder installing temporary lighting. The employee was handed an electrical whip/flexible conduit. The wires in the conduit were live, 277 volts. The employee received an electric shock from the wiring and fell off the ladder. As the employee fell off the ladder his left foot went between two rungs and he fractured his lower left leg.",1
An employee was leaving Building 318 after dropping off some work files. She missed a drop of approximately four inches causing a fall that broke her ankle in two places.,1
"An employee caught his hand in a conveyor on the labeling line amputating the tip of a finger, breaking another finger and injuring several others.",1
An employee was squatting and bending down to reach scrap metal chips from underneath the CNC machine and pinched nerve. He was treated at the hospital.,1
A winder operator on the end of the production line suffered a fingertip amputation when his hand was caught in the push portion of the winder.,0
An employee was standing on the third step of an eight foot step ladder pulling a cable through a conduit with a fish tape. The fish tape popped off the cable and the employee fell off the ladder and struck the ground. The employee was hospitalized with a fractured pelvis and chipped vertebrae.,1
A maintenance employee was troubleshooting the body line machine when it actuated resulting in a two finger amputation (pointer and middle to first knuckle on the right hand).,0
"An employee was operating a powered industrial truck to pick up a pallet of product.  The employee ran over some spilled product in front of the pallet, causing the truck to slide and strike an upright storage rack.  The employee's right foot got caught between the storage rack and the truck.  The employee suffered a partial fracture of his right heel and skin removal, requiring hospitalization for treatment.",1
"An employee was helping to move aluminum tubing and frame-filled crates. The employee was signaling the operator when his left pinky got caught between the board and the crate. His left pinky fingertip was amputated, removing mostly skin and the fingernail.",0
A driver completed his route for the day when he began to complain of cramps and a headache. The employee was transported to the hospital where he received IV fluids. He was released the following morning.,1
"An employee was operating the shape mill when his left arm got caught between two rolls.  He sustained a broken wrist and forearm, requiring surgery.",1
An employee was climbing down a fixed ladder when his foot slipped and he fell five feet injuring his left shoulder. He was admitted to the hospital and underwent surgery for a fractured shoulder.,1
An employee sustained an amputation of three fingers to his left hand while working on a commercial ironing machine.,0
"On or about June 16, 2015, a seasonal employee had the top portion of his finger severed by an auger as he was attempting to replace the plug in the bottom of an ice auger.",0
The worker may have been clearing a jam or retrieving some mail when he tripped and fell hitting his head on the floor or railing. He was found by another employee and admitted to the hospital.,1
The refrigerator and ice maker in the break room were leaking causing water to drain onto the floor.  An employee placed items in the refrigerator and was going to the assignment board when she slipped and fell fracturing her patella which required surgery.,1
An employee was found unresponsive after being missing for approximately one hour. The employee was potentially exposed to struck by hazards while performing lay down hand duties.,1
"On 6/16/15, an employee was injured when he slipped off the forks of a forklift and fell 5 to 6 feet. The employee was hospitalized with cracked ribs and a groin injury.",1
An employee was operating a forklift and crushed his hand between a racking system and the forklift resulting in hospitalization.,1
An employee was in one area of the shop cutting metal and welding. He heard a noise and went to investigate at the other end of the shop. He decided to oil the rolling machine. As he was checking the rolling machine his gloved hand was caught and pulled into the machine. His hand was crushed and skin was removed from his hand.,1
An employee suffered a fingertip amputation of the ring finger on his left hand while emptying a dumpster into a roll off container.,0
An employee was on a ladder when the ladder fell.,1
On 6-16-2015 at 4:45 PM an employee was injured while dismounting a forklift inside a trailer. The  employee rolled an ankle which caused a dislocation and fracture to his toes requiring hospitalization and surgery to his left foot.,1
An employee broke a leg while operating a tire changer.,1
An employee stepped off of a forklift and entered the freezer where he slipped on condensation that had accumulated on the floor causing him to fall backwards.,1
An employee's hand was pinched between a man basket and the frame of a conveyor.,0
An employee lacerated the ring and middle fingers of the left hand while running the Hesser machine.,1
An employee placed a casting on a table. The casting slid off the table and onto the employee's foot resulting in an injury that required stitches.,1
An employee was admitted to the hospital with several broken bones after being struck by a pole that was not securely rigged.,1
An employee's right thumb was amputated while trouble shooting a problem on line 5.,0
An employee cut his finger on a lawnmower blade while clearing a clog and was hospitalized.,1
An employee was observing a company called Alpha Omega in the process of using a Hydro-Vac Machine when a coupling came apart causing a piece of metal pipe to strike the employee on the right side of his face causing a laceration and then striking his right hand causing it to fracture.,1
"An employee was pushing a powered pallet jack through a set of dock doors with his hands on the outside of the handle. The dock doors closed crushing the middle, ring and pinky fingers on his left hand resulting in an amputation of the pinky fingertip.",0
An employee was working on a metal conveyor frame. He was cutting off the legs and set it down on saw horses. The frame fell off the saw horse and struck his body. He was hospitalized with abdominal injuries.,1
An employee operating a stacker/reach truck lost control and was thrown from the lift striking a structural I-beam and fracturing his pelvis.,1
"An HVAC mechanic was working on the back of one of the units at Building 182.  He attempted to adjust a wire, reached in, and the spinning fan blade contacted his fingers. He suffered multiple lacerations on his fingers and a possible amputation.",1
An employee received an amputation injury while operating molding machine #26. The employee placed a mold into the machine. The mold was crooked so the employee reached in to straighten it. The machine activated and came down on the employee's left hand. He was taken to the hospital where his index and middle finger were amputated above the knuckle. He also received burn injuries to his hand.,0
An employee was completing general ground maintenance work using a weed eater when he began to feel nauseous and dizzy. The employee fainted and was hospitalized for heat exhaustion.,1
An employee driving a truck suffered from dehydration.,1
"An employee was sprayed by ADAME, a corrosive chemical, while opening and closing a piping valve requiring hospitalization.",1
"An employee amputated the middle finger, index finger, and thumb on the left hand while operating a table saw.",1
An employee operating the Unit 26 tooth molding press partially amputated his left hand.,0
"An employee was crushed between two tractors. Employees were using jumper cables to boost a dead battery on a John Deere agriculture tractor when the tractor jumped backwards and the employee became pinned between the weights on the front of the back tractor and the back wheel of the front tractor. The injured employee had internal bleeding, sustained a collapsed lung and a tear in his small intestines.",1
"An employee, operating a pallet jack, was walking with the jack and exiting a room. While exiting, the employee's hand was pinched between the wall and the handle of the pallet jack, amputating the tip of his left pinky finger.",0
"While operating a meat band saw, an employee amputated the tip of his right index finger.  The incident occurred in the cutting room within the meat department.",0
An employee was injured when she tripped over a loose cord laying across her work space and fell breaking right femur.,1
An employee was moving film to storage on a platter (metal plate) when it started to fall. The employee tried to catch the plate and crushed her left index fingertip.  Three days later it had to be partially amputated.,0
An employee was trimming grass when he felt ill due to the heat. His supervisor took him to a shady area and gave him water. The employee went to the hospital the following day where he stayed overnight and was treated for heat-related symptoms.,1
"An employee got out of a garbage truck to loosen a turnbuckle on the back of the truck. Another truck exiting the dump stopped to talk. As the exiting truck began to move again, the turnbuckle popped. The employee stepped backwards (towards exiting truck) to regain balance. The employee's foot was run over by the rear axle of the exiting truck.",1
An HVAC mechanic was clipped by a fan blade while working on an AC unit which resulted in a finger amputation.,1
An employee amputated the left pinky fingertip while closing the role down door of a delivery truck.,1
A forklift accident injured an employee's right foot.,1
An employee was attempting to connect a hose onto a tank and the tank overflowed. Hot water burned the employee's back.,1
"A grounds maintenance employee was using a ladder to cut a large tree branch with a chainsaw.  The tree branch broke loose, striking the ladder and causing the employee to fall.  The employee was hospitalized and treated for a laceration to the right forearm (involving 40 stitches), a punctured lung, and a fractured pelvis.",1
An employee was working on a conveyor belt and other workers began to walk by.  The employee tried to move out of the way and put his hand on the conveyor. His left index finger was cut off above the middle knuckle.,0
The employee was pushing a cart with glass in it. The employee turned the cart and was about to hit a fan that was mounted to a pole. Other employees yelled for him to look out. The yelling startled the employee and he bent forward cutting his right bicep in the process. He was taken to the hospital for treatment.,1
An employee splitting firewood with a hydraulic log-splitter received an amputation to the left index fingertip while attempting to adjust a log in the splitter.,0
"The employee was walking back to the office after collecting mail when a U-Haul employee, who was servicing a truck, backed it up and ran over the injured employee. The back wheels ran over the employee's abdomen severely injuring him.",1
Employees exposed to crush-by hazards while conducting automobile high altitude performance testing.,1
An employees was hospitalized when his foot was run over and crushed by a forklift.,1
" An employee was troubleshooting the operation of a canning labeler.  He removed a guard to clean the belt and pulley power transmission system and the machine unexpectedly started, amputating the employee's index finger in the power transmission system.",0
"On 6/17/15, an employee was hospitalized after falling in the bottle return room and breaking ribs.",1
A framing employee was admitted to the hospital after trusses the employee was standing on broke causing the employee to fall approximately 9 feet.,1
An employee fell from a 3-foot high deck truss and caught an adjacent truss just under his ribcage causing a blood vessel to rupture resulting in significant internal bleeding. He was hospitalized.,1
An employee suffered a broken forearm while changing a coil on a tire machine.,1
The employee was trying to remove the mast from the forklift that was being held by a chain fall.  He bumped the stuck mast to lower it and it fell.  His arms were caught under the cross piece of the mast.,0
"An electrician at the Ford Motor plant was driving a scissor lift. He stopped the lift to begin work on an electrical panel.  When he stopped the lift it rocked, causing his hand to get caught between the lift basket and the electrical panel.  His left pinky finger was crushed resulting in the amputation of the fingertip.",0
An employee sustained an injury to the right hand after being exposed to a caught in hazard.,1
One employee from Chevron and two employees from Exterran were putting  compressors back on line when a rupture on the discharge line occurred.  The Chevron employee was taken to the hospital to removed debris from his left leg and released.  One Exterran employee was not injured and the other employee received a scratch above eye requiring first aid only.,1
An employee's hand got caught in a machine while attempting to make repairs.,0
An employee's left bicep was cut by a chain saw while the employee was cutting a tree.,1
An employee pushing five screen doors felt pain in his back and had difficulty breathing. The employee was hospitalized with a collapsed lung.,1
"On 6/18/2015, an employee was operating a band saw in the frame mill section to cut a piece of wood. A portion of the employee's right thumb (half of nail) was cut off.",0
An employee was struck-by a manually operated pallet jack as he was moving a load of boxes.,1
Hydraulic fluid injected into the finger of an employee working on a forklift.,1
An employee was operating a hydraulic-activated torque wrench to bolt up a flange. The hydraulic hose to the wrench developed a leak. The employee was injured when high pressure hydraulic fluid penetrated his right hand. The hydraulic wrench was a rental unit. The employee was hospitalized.,1
"An employee was operating a forklift to unload equipment when he accidentally disabled the parking brake while getting out of the forklift to readjust the load. The forklift started rolling toward him.  In the process of getting out of the way of the forklift, his thigh got cut on the deck of the forklift.  He was hospitalized and received stitches.",1
An employee on a rear-loader garbage truck fell off the back of the truck.,1
"An employee fell off the roof at a jobsite at New River Marine Corps Station, hitting his head and hurting his back.  He was hospitalized.",1
"An employee was locking the utility chip box with a pin. The pin was not properly inserted and the box started to come down and crushed his right hand, amputating his right index finger.",0
"While cutting a small tree into sections, an employee's left foot was cut by the chain saw he was operating.",1
An employee on a forklift reached out with her right hand to hit a button to activate the dock door.  Her foot slipped off the brake of the forklift. The forklift rolled forward and the employee's arm was caught between the upright on the forklift and a bollard post. She sustained a laceration to her forearm that required stitches and overnight hospitalization.,1
"An employee was using a 10,000 PSI water blaster and contacted his right foot resulting in a severe laceration.",1
An employee was helping to cut a hole into a roof to install a new air conditioning unit when he fell through the hole about 10 to 12 feet.,1
"A door clamp came down while an employee was holding onto the door. The employee pulled his hand away, resulting in an avulsion of the right middle finger, which had to be medically amputated.",0
An employee was repairing an underground propane tank gauge when the propane ignited a fire. The employee sustained second and third degree burns requiring hospitalization.,1
"An employee reached for something hanging on the back of his trailer and fell into a pit that was approximately 10-feet 6-inches deep, fracturing the left femur, shoulder, and right ankle. The employee was hospitalized.",1
"An employee tripped while walking into the break room, shattering her elbow and sustaining bruising.",1
"An employee's left ring fingertip was amputated on June 18, 2015, after reaching his hand in a repelletizer to clear a jam.",0
An employee was exposed to a live electrical wire while on a ladder installing insulation to the ceiling. The employee came in contact with the wiring.,1
"On or about June 19, 2015, at 11:00 p.m., a 3' x 5' roller rolled over an employee's foot while rolling asphalt.  The employee was working on a Route I-91 jobsite in Enfield, Connecticut. The employee was hospitalized.",1
"An employee was on a cat walk operating an ADL boom loader crane. The truck part of the crane started moving forward. The employee got out of the operator's seat and jumped off of the cat walk onto the truck bed, fracturing his right leg.",1
An employee fell and broke his left arm while descending from an 8-foot step ladder.,1
An employee was working in a parked trailer at the distribution center when he tripped and fell.,1
"An employee was injured while operating an overhead crane when the beam being lifted shifted and fell from the hooks, landing on the employee's right ankle.",1
"An employee operating a tractor trailer backed the trailer up to the dock. The employee stopped just before the dock to open the trailer doors; as he opened up the left trailer door, he saw a double stacked pallet start to fall from the trailer. He was not able to get out of the way and was struck by the pallet and knocked to the ground. The employee fractured his right hip and right femur, requiring surgery and hospitalization.",1
An employee was showing another employee how to weld frames and the trainee accidentally contacted the trainer's arm with the hot welding rod. The trainer was wearing an approved welding sleeve. The resulting injury became infected and the employee was hospitalized for treatment.,1
"Two employees were taking measurements under the Route 219 bridge to prepare for their next cut on the bridge. The bridge collapsed. One of the employees was hospitalized for head, neck, and spinal injuries. The other employee was treated for a broken ankle.",1
An employee sustained an amputation of the left ring fingertip while operating a drill press.,0
An employee put his hand in the print roller area of an envelope machine to clean it. The machine was operating at the time. He sustained a right-hand pinky finger amputation.,0
An employee fell down a flight of stairs while showing an apartment. She sustained ankle injuries that required surgery.,1
An employee's pinky fingertip on the right hand was removed while troubleshooting a problem with the aeration system in a grain bin.,0
An employee broke their leg while fixing a ceiling.,1
An employee fell approximately 40 feet through the roof of a building.,1
"On June 19, 2015, an employee missed a step while dismounting from the cab of a front loader truck. He twisted his left knee when he contacted the ground, requiring surgery and hospitalization.",1
"An employee was removing the ejection plate from a mold while a crane was being used to ""take a strain"" on the plate. The employee was under the mold, which was sitting on saw horses, using a wrench to remove bolts. As he was removing the bolts, the mold shifted and broke his ankle.",1
"An employee was using a hold-down clamp to position material to be sheared. While adjusting the hold-down clamp, the machine cycled, crushing and amputating the tip of his right-hand middle finger.",0
"An employee was spotting for a forklift driver who was moving a crate. The forklift hit a stack of crates, which shifted and caused a second crate to fall on the employee, cutting him on the head.",1
"An employee's hand was in the danger zone of a Hydro machine when a coworker powered up the machine. Three of the employee's fingers were crushed, and one was surgically amputated. The machine guard was not in place at the time of the incident.",1
An employee fell 12 feet through a floor opening on the 6th floor to the 5th floor. His harness was not attached at the time.,1
A summer employee was tasked with weed whacking brush on a hill at the amusement area.  He slipped while mowing the hill and severed the tips of three toes.  He was hospitalized where surgery was performed to repair the toes.,1
"An employee's right arm got caught in a conveyor belt system while the employee tried to remove a piece of glass that was stuck on the conveyor belt. The employee's right arm contacted a rotary pulley, causing a laceration to the bicep area. The employee was hospitalized for surgery.",1
"An employee was working at the 5-foot level of a 10-foot step ladder. The employee fell to the concrete ground below, breaking the left ankle and requiring hospitalization.",1
"An employee was changing the oil and air filter on a septic tank truck. The employee turned and slipped, falling approximately 3.5 feet to the ground below. He was hospitalized for injuries to his back.",1
An employee was walking in a designated walking area when she was struck by a forklift from behind.,1
"A maintenance employee was trying to free a log jam on the DDM6 machine. The machine was locked and tagged out at the time. He was using a sledge hammer to break the log loose. The sledge hammer slipped, and the employee's left thumb became stuck between the hammer head and the blade on the machine.",0
An employee's left index fingertip was amputated when it got pinched between a road plate while rigging the plate to a backhoe bucket with a lift chain.,0
An employee was installing shingles on a roof approximately 20 feet above ground level. The employee fell and was hospitalized. Fall protection was in place at the time.,1
"While cleaning the plunge plate of a pole using a foot pedal, an employee's left foot fractured after getting caught  between the pole and the ladder.",1
"An employee was lifting an 8 ft. x 20 ft. 1/4"" flat sheet of steel with a crane to be transported to the burn table to be cut when it slipped out of the lifting plate clamp and fell on his right foot.  He sustained four fractures in his right foot.",1
"A door hit an employee's elbow and forearm, causing a hematoma.",1
"An employee lost their balance and fell while assisting a patient in the bathroom, requiring hospitalization.",1
"An employee appeared to be overheated after installing tires and wheels during the day. The employer asked him to rest. After about 30 minutes, he did not appear to be getting better, so the employer asked him to go home. He was eventually hospitalized.",1
An employee fell approximately 3 feet when descending from a 1-tier baker scaffold being used for insulation operations on a residential construction project.,1
"An employee fell off the back of a golf cart while trying to get raccoons out of a dumpster. The employee was standing on the back of the golf cart while a coworker was in the driver's seat. The coworker moved the golf cart forward, causing the employee to fall to the ground and sustain an iliac crest fracture. The employee was hospitalized.",1
An employee had a finger amputated and other fingers crushed while utilizing a skid steer to move stone from a pile into the back of a truck. His fingers were crushed against the back of the truck when he reached for the dash bar resulting in injury to fingers on both hands.,1
"An employee was pumping concrete onto the fifth floor of an apartment complex. The employee's foot became entangled in the hose, which dragged the employee through the corridor and over the balcony onto the ground below.",1
An employee was hospitalized after being bitten by an insect due to infection.,1
"While working at a residential property, an employee came in contact with an energized electrical wire. As a result, the employee received an electric shock and was hospitalized for treatment.",1
"An employee was using de-burring tools to remove burrs from a 25 inch metal diaphragm weighing 135 pounds. Two 2x2s were lying flat on a metal table and the diaphragm was placed on top. The employee had finished de-burring the top side of the diaphragm and was in the process of manually flipping it over when the 2x2 on the left side kicked out and the employee's left hand got caught between the fins on the diaphragm and the metal table, amputating the middle fingertip.",0
An employee suffered burns on his right leg while using a gas saw to cut steel. The employee was cutting steel when the sparks from the gas saw ignited his jeans. He was hospitalized.,1
"A maintenance employee was completing inspections of the battery charging unit. He was in a caged area that elevated him three levels high, approximately 15 feet from the floor. He was lowering himself and believed he was on the ground level. He raised the guardrail bar and stepped out, falling 4-5 feet to the concrete floor below. The employee suffered a back injury and was admitted to the hospital.",1
Employees were dismantling a scaffolding stairway to make entry into the pro scrubber. The scaffold collapsed when the scaffold cross brace was taken off and the cross brace struck two employees.,1
"In the meat market, an employee sustained a partial finger amputation when using a meat band saw to cut meat.",0
An employee slipped and fell while going down stairs and broke his leg.,1
"An employee was emptying a hopper on a forklift when his hand slipped from the release lever. His finger got caught between the forks and the hopper. His left index fingertip was pinched off, requiring surgical removal to the first knuckle.",0
"An employee working on an incline belt was caught between two rollers, breaking her left arm.",1
"An employee was cutting a stump with a chain saw when the tree fell over and rolled into the employee, fracturing his pelvis.",1
"An employee was changing a chemical in a cleaning tank on a plating line when the tank exploded. The chemical, Sirprep 309EC, is an electrical cleaner; it contacted the employee, and he suffered serious chemical burns on 20 percent of his body.",1
"An employee walking on the ground level tripped over a ladder and fell on the ground, requiring hospitalization for a broken hip.",1
A truck driver fell as he was getting into or out of the driver's side of his truck.  The employee was hospitalized with numerous bodily injuries.,1
An employee was off loading a counter top and the load slipped. He tried to catch it and his right middle finger was caught between the counter and the truck bed.,0
"A contract truck driver from another company delivered material at the well site and left without unhooking a hose. As the driver drove away, the hose broke and struck an employee, breaking the employee's femur. The employee was hospitalized.",1
An employee amputated the tip of the little finger on the right hand while operating a Model 1200 Powermatic drill press.,0
"An employee was cleaning a clogged strainer on a pump. Upon removal of the strainer, stored up steam was released and burned the employee's face, chest and right arm.",1
An employee was operating the Reed Thread Roll Machine with the guard removed. He pressed the button to operate the machine and it did not cycle. He then stuck his left hand into the machine to diagnose the problem and his left index finger was caught in the machine resulting in an amputation above the first knuckle.,0
An employee operating an ATV made a left turn and the ATV slid on some gravel causing it to roll over and throwing the employee from the ATV. The employee landed on his shoulder and broke ribs.,1
Employees were exposed to fall hazards while working on the scaffold.,1
"An employee was walking around the laser control when he tripped on the corner of the pallet and fractured his hip, requiring hospitalization.",1
An employee was transferring wash material from one level to another using a scaffold ladder. He  fell backwards and fractured his back. He as admitted to the hospital.,1
An employee grabbed the boards as they started to jam up on the conveyor belt for the trim saw.  The employee was pushing a group of boards into another board when the board kicked back forcing the employee's hand into the conveyor belt and amputating the tip of the employee's right thumb.,0
An employee was spray painting for the second part of the day. He cleaned up his tools and was walking to his car. His legs became wobbly and the supervisor put him in a golf cart to cool him off. He collapsed and was taken by ambulance to the hospital.,1
 A Readymix driver was deploying a cement chute at a job site when his right fore fingertip was pinched by the chute.,0
An agent fell and hit his/her head.,1
An employee was cleaning the LMC machine's (glue machine) rollers and caught his right index finger in the chain and sprocket apparatus. His finger was amputated at the first digit.,0
An employee reached under equipment to retrieve an item on the floor and caught her hair in a rotating shaft resulting in a scalping injury.,1
An employee was working alone on 6/22/15 setting up TOFC rollers that carry cargo into tractor trailers. The TOFC rollers became loose and struck the employee in the head. The employee suffered head trauma and lacerations to his ear.,1
"A temporary employee suffered a partial amputation of the distal phalanx (fingertip bone) on her right hand. The employee's finger was caught between the metal spindle of a fabric roller and the ""pay-out cradle"" when she was loading an 87 pound canvas roll into the cutting machine. The cause of the amputation was not related to the fabric cutting mechanism. The amputation was a result of her finger being pinched between the end of the fabric spindle that extends through the shaft of the fabric roll and the cradle which holds that spindle in place.",0
"An employee was injured during a horseback ride when the horse was spooked and flipped over, crushing the employee and injuring her pelvis.",1
"While the employee was bending two pieces of rebar, his left hand pinky finger was pinched by the roller. As he pulled his hand off the glove, the tip of his finger was amputated.",0
A temporary employee suffered a broken leg after he fell about 44 inches while on a refractory brick cart.,1
"An employee was helping to place a motor on the bed of a truck using a forklift. He reached under the forks to unhook a chain when the forks came down crushing his hand and forearm.  No bones were broken, but he suffered severe bruising and a compression injury. The employee's arm was lanced from the wrist to the elbow to relieve internal pressure.",1
A temporary employee suffered a severe laceration while operating a wood jointer.,0
An employee stepped off a ladder onto the roof of a home and fell approximately 10 feet.,1
"An employee finished placing roofing materials on the roof for the customer and as he was stepping onto the ladder, he fell 10 feet to the ground resulting in broken vertebrae.",1
An employee splicing communication cables pricked himself with a piece of rusted metal debris that was on the ground. Later in the day the wound became infected and the employee was admitted to the hospital for treatment.,1
An employee amputated the tip of his right hand while clearing a jam on the sealer 2 machine.,0
"On a worksite managed by Whiting-Turner Contracting Company, an employee of Concrete Coring Company of St. Louis, was drilling a hole in bedrock using a core drill. Employees of Gold Mechanical, a plumbing contractor on the worksite, were conducting a live test of piping using pneumatic air. The injured employee was working adjacent to a pipe included in the live test. A cap from the pipe was propelled at a high velocity by the pneumatic air and struck the injured employee in the face and fracturing his jaw. The employee was hospitalized for treatment.",1
An employee was on top of a scaffold performing dry blasting operations. The employee was kneeling to reach the lower area and lost balance. The employee blasted the left hand and was hospitalized as a result of the injury.,1
"A limousine service employee was taking a customer to the airport.  After dropping off luggage with the customer, the employee turned to get back into his vehicle and his knee gave out resulting in a broken ankle. The employee was hospitalized overnight.",1
"An employee was changing a fuse in a 440v electric panel when the fuse engaged, causing an arc flash that shorted out the panel and sent out a ball of fire. The employee received first and second degree burns on his face and hands. The employee was wearing safety glasses at the time of the incident.",1
Two employees were in the process of setting up cones to define a control zone in order to start painting traffic lanes. A passing driver struck the company vehicle and one of the two employees who was hospitalized with non-life threatening injuries.,1
Two employees were pulling wire from one panel to another panel. One panel was energized; the other panel was not. The employee who was working at the energized panel came in contact with the live wires and suffered electrical burns to his hand (277 volt).,1
An employee was pushing a small part on a table saw when his hand slipped and he amputated the tip of his left thumb.,0
An employee was struck by and ran over by a forklift.,1
An employee was injured while setting up a rotating rack used to display canes. The employee suffered a corneal abrasion to the left eye.,1
"On or about 6/22/2015, an employee was attacked by a dog while carrying mail on his route. He sustained severe lacerations to his legs, arms, and face. He was taken to the hospital and received 30 stitches in his nose and 6 stitches in his hand.",1
An employee was repairing an electrical flash butt welding machine while it was energized. The rail clamp engaged and crushed the employee's right middle and index fingers. The fingertips were surgically removed.,1
"The employer found out through the workers comp carriers on 06/22/2015 at 5:47 pm that an employee was hospitalized and filed a workers comp claim. The employee was at work catering planes. After the second flight he stated that he was dehydrated. He was experiencing pain in his back and chest, dizziness, and was blacking out.",1
An employee opened the drum and pail kettle to look inside. The cover fell in. The agitator spun the cover around and knocked the employee off the platform resulting in an approximate six foot fall.,1
An employee severed the left thumb tip off including the entire nail while operating a band saw to process pork roast into chops.,1
"An employee was working near a shelter that was being assembled, walking on a catwalk.  The employee walked onto a section where the catwalk had not yet been fully assembled and fell approximately 5 feet, fracturing the top of his left femur.",1
"An employee was troubleshooting problems with the tooling on a mill roll. As part of the troubleshooting process, he had to feel the polished mill roll for imperfections as the machine was running. As he was feeling the roll with his hand, the roll pulled his hand into razor sharp sheet metal that is formed in the mill machine. Contact with the mill roll partially severed the tip of the employee's left index finger. The employee was hospitalized, and his fingertip was medically removed.",0
An employee was inside a sewer hole and was turning on a jetting tool when the pressure caused the hose to whip around and strike the employee's lip and elbow.,1
An employee working on a scaffold breaking off rebar by hand lost his balance and fell over the wall 13 feet to the ground.,1
"An employee was removing plastic tote containers from a tractor trailer. As the employee pulled on the totes, they caught on a piece of the trailer and tumbled over on top of the employee. The employee was taken to the hospital and given a medication that caused an allergic reaction. He was  held overnight for observation due to the allergic reaction.",1
"An employee was climbing a ladder with a caulking gun, lost his footing, and fell six feet injuring the right ankle and the left elbow. The ankle injury required surgery.",1
An employee was hospitalized when a pneumatic nail gun exploded causing fragments to be embedded in the right thigh and lacerating the right arm.,1
"While cleaning the outside of a bulk meat grinder, an employee's right hand was amputated when he reached through a sample grinder port. This incident took place at approximately 9:00 PM on 6/23/15. The employee was hospitalized.",1
An employee was using a stationary welder with a foot pedal. When she placed the nut within the electrodes she accidentally stepped on the pedal and the welder activated. ,0
Two employees were assaulted by a fellow employee.,1
"An employee operating a powered floor jack inadvertently steered the jack toward himself, pinning his left lower leg between the powered jack and an adjacent storage racking system.",1
"An employee received a partial amputation injury to his left middle finger. The employee was helping to pick up a 55 gallon drum that had fallen/tipped off a forklift when the employee's finger became caught between the drum and the forklift, resulting in injury.",0
An employee was walking past another employee who was operating a chain saw and contacted the chain saw.,1
An employee was exposed to crushing-hazards and sustained serious injuries.,1
"An employee was installing drywall from a 2-foot scaffold. There was a 5-by-5 foot opening adjacent to the scaffold. The scaffold was on an incline and rolled down the slope into the hole.  Once the scaffold hit the hole, the employee flew from the scaffold and made contact with the concrete, breaking three ribs, bruising the right shoulder, and cutting the forehead.",1
A framer fell down a temporary stairway.,1
An employee was changing a tire in one of the presses when he reported that he had a light headache. His condition worsened to include nausea and blurry vision. The employee was taken to company healthcare provider and then to the emergency room. His illness was a result of dehydration.,1
"An employee was working on a flour mill to remove a bolt using a breaker bar with a socket on end. The socket slipped off the nut and struck an unguarded moving belt. The breaker bar came back, hit the employee in his jaw and broke it.",1
"On 6/23/15, an employee was hospitalized when he fell from a ladder. It was reported that the strap, which secured the ladder, broke. The employee fractured, broke, and dislocated bones in his right arm and left hand/wrist when he contacted the ground.",1
"While reaching through a hole in a wall an employee stepped on a ladder that was leaning against the lower part of this opening. He stepped above the fulcrum of the ladder. Therefore, the ladder acted like a teeter-totter and the employee fell about two feet and broke his left ankle.",1
An employee operating a forklift machine went over to pick up a pallet from the floor. The employee was not aware that the machine was jammed.  The next pallet that came out of the machine fell on the employee.,1
"An employee was using a grinder with a cutting blade to cut a stainless steel countertop from below when he sustained a deep cut to his right arm, requiring hospitalization.",1
An employee placed their hands at the end of the MRI table while a coworker was moving the table to position a patient for testing. The employee's finger got wedged and amputated by the movement of the table.,0
"While a boom was being unlatched at a well site, the boom snapped and threw the pipe off, hitting an employee on the ground.",1
An employee suffered a partial finger amputation while handling a metal bin.,1
"A temporary employee and three to four additional temporary and permanent employees were attempting to down-stack leaning pallets of product (canned and bottled beverages) from a stack of three loaded pallets. The stack was approximately 15-20 feet high. The pallets fell, for an unknown reason, and the temporary employee was pinned under product and pallets against the wall. He suffered a broken femur and fibula, broken ribs, a punctured lung, and a possible lacerated spleen. He was hospitalized.",1
An employee was leaning against a pallet while standing and talking to the store manager. The employee fell down to the floor and landed on his back. His head hit the concrete floor.,1
An employee fell off the back of a truck and sustained a head injury.,1
"An employee was in ladder training.  He climbed 18 feet to the top of the pole. While coming down the ladder, the ladder turned and began to slide off the pole. The employee fell about 15 feet.",1
An employee was loading a side dump truck while working on a median at the intersection of Lincoln and Lamay in Ft Collins. The driver was given the signal to pull forward just as the injured employee slipped on the curb. The dump truck ran over the employee's leg.,1
An employee was operating an Accupress press brake and the tooling pinched his middle and ring fingers on his right hand.,1
"An employee was hospitalized due to a flash fire at a compressor station while servicing a stage 2 compressor in Alexander, North Dakota.",1
An employee was using a boom when a piece of granite slab fell on the employee's leg.,1
An employee was lifting a roll of pallet film from the ground when he lost his balance and fell to the ground with the roll in his hand. The roll hit the ground and crushed his right index fingertip.,0
"An employee was putting tools into a job box when another employee closed the lid, pinching his left middle fingertip in the handle, resulting in the tip being amputated up to the finger nail. The employee received stitches in the ER and was released on the same day.",0
An employee was manually turning the gate wheel of a 'Work In Progress' (WIP) storage bin in order to close the gate. He placed his left hand in between a sprocket and the gate wheel and amputated his fourth left finger.,0
An employee got his right foot and ankle caught in a pallet that was then pulled into the roller on the palletizer. When the pallet was rolling forward it cut his right ankle into the bone. The employee was hospitalized.,1
One employee was moving logs and one log rolled and caught his foot between the log and a chain.,1
An employee was hospitalized after being stung by a bee while walking on a powerline right of way.,1
An employee working construction showed signs of heat exhaustion. The employee taken to the hospital and given fluids and admitted for observation.,1
"An employee was installing a pulley on a machine in the pipe yard. The pulley pulled the employee's left index finger into the machine, amputating the fingertip.",0
"An employee was struck by an air hammer chisel, breaking a bone in his right foot.",1
An employee was changing a belt on an abrasive blasting machine. The employee placed the belt on the pulley while the machine was still turning. The pulley pulled his finger into the machine.  His left index fingertip was amputated.,0
"An employee was working outside on a very hot day, helping another employee pull 4-inch coiled plastic pipe off a trailer when he started feeling sick, vomiting, and experiencing muscle cramps. He was hospitalized for dehydration.",1
"An employee was operating a grinder to sharpen a 6-inch blade when his left thumb got caught in the running grinder. The top of the thumb, including bone, was amputated.",0
"An employee was pulling a plate with a come-a-long inside a pipe vessel.  A forklift was used as an anchor and stopping point for the vessel.  The plate became lodged in the vessel and the next time the employee pulled, the vessel moved and struck the employee on the right side of his body.",1
"An employee was checking the quality of a previous job performed at the site location. The employee was descending a ladder when the ladder shifted. The employee's weight shifted, causing the hook to come off the wire.  The employee stepped off the ladder hard and fractured an ankle.",1
"An employee and a coworker were rolling a cylindrical cyclone hopper down a passageway when the hopper became unbalanced and started to fall. As the employee attempted to catch and re-steady the hopper, his left pinky finger got caught between a metal flange on the hopper and a permanently fixed metal pipe of the building. The employee injured the left pinky finger; the fingertip was amputated at the hospital.",0
"On June 8, 2015, an employee suffered a partial amputation of their right-hand middle finger.",0
"An employee working near an auger hole was injured when something in the hole sparked, causing minor burns to the employee's right and left forearms and cheeks. The employee was hospitalized.",1
An employee suffered a heat-related injury while working when he started to cramp. His condition became critical by the end of his shift. He suffered renal failure and was hospitalized on 6/24/15.,1
"An employee performing tree trimming for an easement lost control of a circle saw and was cut on the bicep of the right arm. He was working from an aerial lift along Rakestraw Road in LaGrange, Georgia.",1
An employee who became dizzy was hospitalized and treated for heat-related illness.,1
"An employee was putting a 5-ton tool into the thermoformer with a cart. The tool was misaligned and was hitting the alignment block. When the employee reversed the cart, the tool fell off the thermoformer onto the floor, forcing the cart back. The employee was pinned between the cart and a conveyer, causing injuries to his ribs and lungs. He was hospitalized.",1
"An employee was walking in a designated walkway though the warehouse on her way to the break room. A forklift driver drove a forklift into the walkway and did not see the employee. She was struck by the forklift blade on her ankle, and then fell to the concrete floor. She suffered lacerations and contusions to her ankle and thigh, as well as an unspecified head injury. She was hospitalized for treatment.",1
An employee was handling pipe on the drilling rig. His right ring finger got caught between the thread protector and pipe collar.,1
An employee cut the tip of his left thumb while cutting carpet.,1
"An employee was lifting a spool of wire weighing 82 pounds when he lost his grip. While trying to hold on to the spool, he felt a pop on his back and started feeling pain.",1
"While walking into a refrigerated cooler, an employee slipped on the condensation on the floor, falling and breaking her left hip.",1
"An employee climbed onto a pump-jack 
scaffold to finish some caulking work (26 feet above ground) on an apartment building. After finishing the area where he was caulking, he attempted to climb down from the pump-jack scaffold by placing his feet on the top safety rail of a third floor balcony guardrail. The safety guard rails were two temporary balcony guardrails made up of 2 X 4's placed across the balcony's edge. The top safety rail collapsed, and the employee fell to the ground between the pump-jack scaffold and patio area.",1
An employee reached into a packaging scale to clean out polyethylene packaging pellets and the pneumatic gate closed on his right hand.,1
An employee's fingertip was amputated while trying to unclog a conveyer. His finger was amputated while in the pulley of the drive mechanism.,0
Employee showed signs of heat exhaustion and was admitted to the hospital.,1
"On or about June 24, 2015, at 9:30 a.m., the end third of an employee's second and third right-hand fingers were ground off while feeding meat into the industrial meat grinder.",0
"An employee was cleaning a dough mixer when the mixer was operated, causing the employee to have one finger amputated and two other fingers fractured and severely injured.",1
A pile up of tiles occurred on line 8. An employee attempted to turn the conveyor off at the switch. The employee was looking at the pile while his hand was aimed at the switch. His hand missed the switch and the back of his hand made contact with the pulley and guard causing a laceration.,1
An employee was shot in the back.,1
"On or about June 24, 2015, an employee suffered an amputation of the left-hand thumb after coming in contact with the circular blade on the ""Jump Saw"" located in the wood working area.",1
"An employee was placing brush at the table side of a wood chipper when a piece of wood struck his hand, crushing it at the chipper-side locking mechanism and causing a fingertip amputation.",0
"On June 25, 2015, an employee was repairing a skeet machine in the back shop area, removing a leaky gear box from the side of the machine. When he removed the gear box, the main spring engaged, and the throwing arm released and struck the employee in the face. He received multiple fractures to both sides of the lower jaw, requiring surgery and hospitalization.",1
An employee suffered a heat-related injury requiring hospitalization.,1
"An employee was retrieving a 14-pound pallet. When he turned, he tripped over a rack on the floor and hit the ground with his right hip.",1
"An employee was dismounting the cab of a tractor. His foot became stuck on the step and he fell, dislocating his hip.",1
An employee banged a knee on an outdoor air conditioning unit and sustained a minor cut that was treated as first aid. The employee later noticed swelling and was eventually hospitalized for an aggressive type of infection.,1
An employee was on a ladder changing a light bulb when she fell to the floor below. She was hospitalized with head trauma and a concussion.,1
"An employee fell from a flatbed trailer while attempting to secure the load, injuring his back.",1
"An employee fell 15 feet to the ground from an extension ladder while moving a drop line on a residential structure. He sustained multiple injuries to his right arm, right leg, and pelvis and was hospitalized.",1
"While placing cardboard pieces into a stapler to create a box for shipping, an employee stapled their right-hand index fingertip, requiring surgical amputation.",0
"An employee was dispatched to a parts distributor to pick up parts. The employee was standing by the loading dock. While doing so, a truck backed up to the dock and pinned the employee against the dock.",1
"While removing a rack from the top shelf in a cooler, an employee experienced a groin injury that required surgery.",1
An employee's pinky fingertip was amputated when a door shut on it.,0
"An employee slipped and fell, resulting in several fractures and a torn arm muscle.",1
An employee was assisting in remediation work to include asbestos removal and duct work. The employee was on the roof of a gymnasium when the roof vent on which he was standing/sitting collapsed. The employee fell approximately 15 feet to the lower level. The employee broke his right ankle and right arm as a result of the fall.,1
An employee collapsed at the fuel pumps for unknown reasons.,1
An employee laying out a curb line on a road construction project was hit in the work zone by a privately driven vehicle. The employee suffered broken ribs.,1
"An employee was injured when he reached to retrieve a piece from a 100-inch cutter and slipped on oil. The employee struck his face against the frame of the machine, resulting in hospitalization.",1
"An employee was injured while operating a pallet jack at Doyle's Wholesale. The pallet jack ran over the employee's foot, requiring reconstructive surgery.",1
An employee was bitten by a dog while providing physical therapy services at a client's home.,1
"An employee transporting asphalt on a roof tripped and fell, injuring his/her hands and wrists.",1
An employee was sweating profusely when he came out of the painting booth where he was working. His condition worsened and he was hospitalized overnight.,1
An employee was injured while cleaning a crusher machine. The employee's left index fingertip was amputated.,0
"On 6/25/15, at 10:30 a.m., an employee was riding her personal Segway on a street at the Navy base.  While between buildings, she hit a dip or pothole in the roadway and lost control of her vehicle.  She crashed her vehicle and was hospitalized overnight for a hip area fracture.",1
An employee's left pinky fingertip was lacerated when caught in a slip knot during the start-up of the Line 10 machine. The fingertip was amputated during treatment.,0
"An employee was walking towards the copy machine when he fell down on the ceramic floor, causing pain to the back of the head and lower back, as well as a temporary loss of consciousness. He was hospitalized.",1
"An employee was using a step ladder to perform maintenance in the ceiling when he fell, breaking his left femur and requiring hospitalization.",1
An employee suffered arc flash burns while performing electrical work on an energized bus.,1
"On or about June 25, 2015, an employee working at the Army Corp of Engineers Ensley Engineering Yard located at 2915 Riverport Rd in Memphis, Tennessee, was injured and hospitalized. The employee was operating a forklift to move an air conditioning unit up a ramp when it began to fall backwards.  The employee was injured when he was caught between the forklift and the wall of the dry dock, resulting in a severe laceration to his left wrist.",1
"An employee was helping to attach a trailer to a pick-up truck by guiding the trailer as the driver backed up the truck. As the driver was backing up, his foot slipped off the brake, catching the employee between the truck and trailer.",1
"On June 25, 2015, an employee's left middle fingertip was amputated after getting caught in a machine during process set up.",1
An employee's right middle finger was amputated in the slurry room of the chemical department when he contacted the rotating belts on the slurry pump.,1
An employee was struck and pinned by a car when it moved forward instead of backwards in a garage.,1
An employee was hospitalized for an infection to the forearm as a result of receiving a laceration while handling a davit crank handle.,1
"An employee working from an 8-foot step ladder fell from the sixth rung approximately 69 inches.  At the time of the incident, the employee was working to brace a wood frame panel.",1
An employee slicing lemons with a knife suffered a fingertip amputation.,0
"An employee was attempting to move a stuck 3000-pound pallet onto a pop-up chain when his finger got caught between the pallet and conveyor frame, amputating it at the nail bed.",0
"An employee amputated a fingertip while operating a filling machine. The employee was operating the tube filler machine to fill empty tubes with paint. The machine's trimming blade jammed. The employee tried to clear the jam and while a finger was in the nip point, the machine cycled, amputating the tip of his finger.",1
"On Friday 6/26/2015, at 9:00 a.m., a maintenance employee was driving, putting a brand new pin into the backhoe/excavator bucket with a slug hammer. A piece of metal from the new pin broke off, struck him and was imbedded in his shoulder. The injury required hospitalization.",1
"Six 150-pound boxes fell over on top of an employee, causing injuries to his lower extremities, which included breaking both legs.",1
An employee fell approximately 16 feet through a roof opening and struck his head on a table.,1
"An employee was transferring a hoist in need of repairs from the I beam that it worked on to a rail attached to a crane. While disconnecting the two I beams, the rail jumped up, striking the support for the permanent rail and amputating the employee's third distal joint of the thumb on the left hand.",1
"An employee was injured when picking up some steel plates from a pallet. When one piece of steel started to slip, he tried to catch it with the other hand.  His middle finger became pinched between two pieces of steel. He required surgery.",1
"An employee was using a zero-turn riding mower to mow a lawn. The employee slumped forward; as he did so, his left hand was pulled under the mower deck. His left ring finger was amputated, and the blade of the mower sliced into his hand. He was hospitalized.",1
"An employee was assembling a mast on a forklift. The employee's fingers were caught in a pinch point, which resulted in severe lacerations of the middle, ring, and pinky fingers. The employee was hospitalized for surgery.",1
"An employee was sitting in a parked tow truck at 3400 Hwy 75, Richardson, Texas, when another vehicle hit the tow truck from behind.",1
An employee climbed an 8-foot ladder to get into the crawl space in the ceiling and fell.,1
"On or about June 26, 2015, at approximately 1240 hrs. an employee for J&M Energy Services suffered the amputation of the distal phalanx of his right thumb when it was caught in a pumping unit.",0
An employee tried to start a tractor from the outside. The tractor had not been checked to see if it was in gear at the time and it moved forward. The employee got caught by the shredder and was knocked down. The tractor ran over his legs. He was hospitalized with a pelvis broken in two areas.,1
An employee became sick after being bitten by a spider.,1
"An employee was injured when the steel plate (3000 pounds) he was fitting became unattached, striking him and pinning him between two steel plates. He suffered injuries to his right arm and the right side of his abdomen, requiring hospitalization.",1
"An employee was mowing the lawn when an object became tangled in the mower blade. When the employee attempted to remove the object, his right index finger was amputated. The mower was not turned off at the time of the incident.",0
"A maintenance employee was troubleshooting a dust collector that was getting clogged. The employee disconnected the dust collector but did not disconnect the wheelabrator, which continued to rotate. The employee suffered a partial amputation to his right index finger.",1
An employee suffered injuries to their right foot after being struck by an I-beam.,1
An employee was removing shims from a pump motor when a tool slipped and partially amputated the employee's left index fingertip.,0
"An employee was loading de-headed catfish onto a filet machine. His hand got caught in the saddle, amputating the right pinky fingertip.",1
"On Saturday, 06/27/2015, an employee was on a roof deck cleaning up after installing a roof parapet when he picked up a piece of plywood and fell through the hole that was underneath, falling approximately 16 feet and breaking his pelvis.",1
An employee injured his right leg when he tripped over a cord and fell.,1
"While standing on the pavement, an employee was pulling on a rope connected to a truck tarp.  The rope broke and the employee fell fracturing his ankle.",1
An employee working for Tecnico Corporation at the BAE facility stepped off the ladder and broke his leg.,1
"An employee was loading sawdust onto a live bottom trailer using a small yard dog that he hooked to the trailer. The trailer got stuck in a hole and turned onto the left hand side, and the employee sustained an injury to his back, fractured ribs, an elbow wound that required surgery, and a concussion.",1
"An employee tripped on her chair and fell, fracturing her femur bone.",1
An employee's left pinky finger was amputated while working with the baler machine.,1
An employee was servicing a mold servicing tire press when the press cycled and crushed the pinky and ring fingers and part of the right hand. The employee was hospitalized.,1
"A maintenance employee was troubleshooting an automatic tool changer (ATC) on a lathe. The employee thought the ATC was stopped when he stuck his hand in to check the alignment. At that point, the ATC cycled, nipping the tip of his left 2nd finger.",1
"On June 27, at approximately 2:00 p.m., an employee riding on the back of a golf cart fell off and struck his head on the pavement.",1
"An employee's foot got crushed between two motorized pallet jacks, resulting in in-patient hospitalization.",1
"An employee suffered a laceration to the first digit of the right hand ring finger, requiring amputation above the first digit.",1
An employee lost a finger in a part revolution press while removing a jammed part or scrap.,1
"An employee fell from a ladder, sustaining a concussion and fracture of the wrist.",1
"At the Respiratory Care Services area, an employee experienced respiratory distress from exposure to bleach.",1
"On June 28, 2015, at approximately 0900 hrs., an employee was bitten on the finger by a patient.",1
"At an HEB in McAllen, an employee lifted a case of product, which consisted of six 3-Liter bottles, and strained his back.",1
An employee missed a step and slipped on the stairs coming out of the sound booth.  She sustained a compound fracture of her right fibula and crushed her right ankle.,1
An employee received second and third degree burns when his leg broke through a crust on a pit with molten metal.,1
"Two trucks collided in the distribution yard. One employee was hospitalized to receive treatment for broken ribs, a punctured left lung, and spleen removal.",1
"An employee was operating an overhead crane to move steel coils. While raising the crane to remove the lifting chain, the employee had his right hand on the lifting chain. The end of the chain got stuck and started to pull the coil towards an adjacent coil. The employee's right ring and middle fingers were pinched between the coil and lifting chain. The employee required surgery.",1
"An employee working as maintenance staff was removing tight screws with a wrench when the wrench slipped off and hit him in the neck, causing a hematoma.",1
An employee lost his balance while throwing out garbage from a concrete truck platform.  The employee fell approximately 5.5 feet on to his left elbow and required hospitalization.,1
An employee was hospitalized with a punctured lung after a cart of healthcare linens rolled off a mechanical trailer lift.,1
"An employee placed his right hand on top of a the cylinder of a tamping machine. The tamper came down onto the cylinder, pinching his right little finger and causing an injury that required the amputation of a portion of the right little finger.",0
"An employee's right-hand index finger was amputated while repairing a 48"" metal polisher.",0
"An employee was working at DFW Terminal E, cleaning out the debris of an extension joint, when an electric hammer tipped over and fell on the employee's hand. The employee sustained a fractured left middle finger.",1
"An employee was cleaning off an 8' by 4' concrete form when it tipped over, striking his leg and fracturing his femur.",1
"On June 29, 2015, an employee was speaking with a supervisor in the packaging area. Following the conversation, she started to return to her work area at the ovens. She crossed through the transparent curtain adjacent to the packaging area. She crossed into the walkway where it intersects a forklift route. 

A forklift driver was also approaching the intersection. He reported that he slowed and used his horn as he approached the intersection. He did not see her due to an obstructed view. T
he forklift driver continued driving through the intersection. The employee was struck by the forklift and fell to the floor. She suffered a compound fracture to her left ankle and lacerations to her forehead. Her foot/leg was amputated 5-6"" below the knee.",1
An employee's left middle fingertip was amputated when it was pinched between two rack legs that were being bolted together.,0
"While sending air through a pipe for cleaning purposes, an employee used a hammer to hit the pressurized pipe to unclog it. As the employee struck the pipe, a strainer (which lined the inside of the cap) flew off, striking the employee in the forehead. The employee sustained a fracture to the eye socket and skull, which required surgery.",1
"An employee was clearing a clogged dust collector pipe. The employee was standing on a home-made platform that had been elevated approximately 10 feet in the air by a forklift.  The platform measured approximately 12-feet long by 42-inches wide.  The employee stepped off to the side of the platform where the platform was not supported by the forks, and the platform tipped from the forks.  The employee fell approximately 10 feet to the ground below.  The employee sustained nine broken ribs and a punctured lung.",1
An employee fell while exiting a forklift and hit his head on the concrete floor.,1
"On Monday June 29, 2015, at approximately 10:30 p.m., two maintenance employees were servicing a FLEXO press no. 9 in the FLEXO department. The FLEXO press no. 9 feeds bags for in-printing on the roller. The employee was tightening the driver side chain on the press and then proceeded to check the tension with his right hand to see if it was tight enough. The employee's right hand index finger became caught in the chain and sprocket pinch point resulting in a fracture injury. It is unknown at this time if the sprocket was operating or was manually moved by the injured employee.",1
"An employee suffered renal/kidney failure and severe dehydration while on the job driving a fuel truck, requiring hospitalization.",1
An employee's right heel was caught in an auger while installing a choke ring on a press in the processing room. The auger caused lacerations/a fracture to his right heel.,1
"An employee was bending sheet metal with a sheet metal bender when some of it got into a bind. As he was working to unbind the sheet metal, a piece popped up and cut him on the right bicep.",1
An employee fell from a ladder and was injured.,1
"A crew member was attempting to remove a blockage in a 2"" discharge line on mud pump #2 when it released, striking him in the right calf and knocking him to the ground.  The crew member was taken to the hospital for medical evaluation and treatment and then transferred to another hospital for surgery and further treatment.",1
An employee had a possible electric shock when performing phase-to-ground work.,1
"A pipe moving on and with a conveyor belt struck an employee's leg. The employee's leg got caught  between the wall of the conveyor and the pipe, fracturing the employee's leg.",1
"An employee was lifting a cylinder plate (measurements: 7.5 inches tall x 59 inches in diameter, weight 350lbs.) off of a work table to make an adjustment. The part dropped, striking her left foot and resulting in a fracture of the big and second toe, as well as an open dislocation to the third toe. She required surgery.",1
An employee sustained a facial fracture when attempting to remove a hose from a water pump.,1
An employee received burn and crush injuries while engaging in maintenance/repair work.  ,1
"An employee's knee gave out and the employee fell, incurring a mild concussion.",1
An employee was working at Liberty Tire Recycling when his glove got stuck in the tail end of the pulley area of the conveyor belt and his right middle fingertip was severed.,1
An employee fell backwards and struck his head while positioning a pallet with a rope that let loose. He was hospitalized as a result of his head injury.,1
An employee was using their right leg as a work rest while cutting tubing with a razor blade. The employee sustained a severe right leg laceration and was hospitalized overnight.,1
"An employee was helping coworkers trying to undo tension on a 1.5 ton come-a-long. The injured employee struck the angle brace that the come-a-long was attached to. The hook of the come-a-long broke free, striking the employee in the lower jaw/face.",1
An employee was struck by a rolling power pole and was pinned between the line truck and pole.,1
"An employee was performing a custodial task outside when he felt light-headed. He went back inside and was standing on the dock area with his hands and head resting on the shovel he was holding when he fainted, falling to the ground and striking his head. He was hospitalized for stitches and plastic surgeon care.",1
"At night, an employee was walking to his truck and was hit by a yard tractor.",1
"On 6/29/2015, at 12:30 p.m., an employee was backed into by a company pickup truck, which knocked him down. The tires ran over his legs (knees).",1
"An employee reached between the line and the splash board to retrieve a chicken tender. The employee's hand was pulled forward on the line. She pulled her hand from the machine, which caused an amputation to her left index finger.",1
An employee was putting a trench box together.  The employee's finger got stuck between the wall and the horizontal spacing bar when the box was lifted.,0
"On June 29, 2015, at 7:00 p.m., an employee was operating a hoist to lift beef when his finger got bumped between the hook of the hoist and the rail, fracturing his index finger. The injury required surgery.",1
"An employee was on an extension ladder resting on the truck's flat bed. The ladder slipped under him; he fell, broke his nose, and was hospitalized.",1
"An employee was taking the cavity out of a cracked mold that weighs between 200 and 300 pounds. A chain was attached to the top of the mold to hold it in place. As the slack was being taken out of chain to lift the mold, the employee reached up to adjust the chain.  His left middle finger was caught between the mold and the chain, severing the finger.  His finger was able to be re-attached during surgery.",1
The employee was operating a Bobtail truck delivering fuel.  The employee was exiting the cab of the Bobtail truck and slipped and fell.,1
An employee was walking through the pallet aisles when his left foot was run over by a forklift.,1
"An employee was delivering a truckload to a customer on 6/30/15.  He was shifting freight to the edge of the trailer for customer access by pulling a chain attached to the freight. At approximately 12:05 PM, the chain broke or became detached and the employee fell out of the back of the trailer approximately four feet to the ground. He was admitted to the hospital for in-patient care of three broken ribs and a bruised lung.",1
An employee was unloading a truck using a PIV. He backed the PIV out of the truck and noticed that some stock had fallen. He got off the PIV without setting the parking brake. The PIV rolled forward and pinched the employee's leg between the pallet and the side of the truck.,1
"An employee was working near a conveyor when the conveyor grabbed his shirt and pulled his arm into the machine, injuring his right hand.",1
An employee was troubleshooting a sensor on a pallet table for a laser machine.  The table moved and struck the employee breaking the employee's lower leg.,1
An employee was fixing a jam on an automated saw while the saw was still on and the employee fell. The employee was hospitalized and sustained a broken shoulder blade.,1
An employee was using a 10ft rolling ladder to restock shelves. She lost her balance and fell fracturing the left leg.  The ladder's wheels were not locked out at the time of the incident.,1
"An employee was drilling into a pipe in the hydrogen process unit when the line flashed. He was hospitalized with second degree burns on his hands, neck, and chest and third degree burns on his fingertips.",1
An employee amputated his left index finger while using a band saw to cut beef shank in the fabrication department.,1
"On or about June 30, 2015, an employee for Archer Pressure Pumping was hospitalized when he fell off a truck and onto a metal ramp while attempting to cover an equipment truck with a tarp.  The injured employee was standing on the truck and reaching for the tarp when he lost his balance and fell onto the ramp striking his face on the ramp. As a result of the fall, the employee fractured an eye socket and check bone, the right hip and right forearm. The employee was hospitalized and required surgery to repair his injuries.",1
An employee was loading/unloading a truck. His left index finger got caught between a forklift blade and its extension mechanism. The employee suffered an amputation of the tip of his left index finger.,0
An employee was struck by a section of rebar panel  26' wide by 40' long when the straps used to lift it came loose. The employee suffered a broken leg.,1
"An aircraft mechanic was walking through Hangar 2, when he tripped over an aircraft air conditioning hose.  The employee broke his right leg and was admitted to the hospital.",1
"An employee was in the process of clamping a metal pipe into a pistol clamp machine, when the part slipped off the fixture while his foot was on the foot pedal, pinning his left finger between the fixture and the part.",1
"An employee, carrying an approximately 45 lb. valve in a bag, turned to the right, tripped over his foot, and fell to the concrete surface onto his right hip.",1
An employee suffered a finger amputation when he was adjusting the pneumatic cylinder on a press and his finger was caught in the die.,0
"Following a full day of work, an employee began suffering muscle cramps, nausea and generalized ill feeling. He was taken to the hospital and diagnosed with heat exhaustion. The employee was admitted to the hospital, received IV fluids and was kept overnight for observation.",1
A Room Operations Executive Assistant was walking near the kitchen when she slipped and fell causing her to facture her knee. She was hospitalized as a result.,1
An employee was looking for frosting in the freezer and slipped and fell.,1
An employee amputated the tip of a thumb on a meat slicer when the handle broke.,1
An employee was trying to unjam a shear and caught the pinky finger in a nip point. The sheer was activated when the employee accidentally stepped on the pedal resulting in an amputation injury.,0
An employee was exiting a cone trailer and slipped off the steps hitting his head on the pavement. The employee was hospitalized with a concussion.,1
An employee was checking for proper alignment of the Hewsaw Machine. He placed his left hand by the saw box thereby crushing it and resulting in the amputation of his pointer and pinky fingers. He was taken to the hospital where he remained overnight for surgery to attach the fingers.,1
An employee suffered a de-gloving injury and possible amputation of a thumb.,1
An employee was performing maintenance on a machine and removed a pin.  A part fell and struck the employee on the leg causing a fracture.,1
An employee standing in the break room fell over and broke a hip.,1
An employee disconnected a pipe during a sanitation wash cycle and was burned below the waist by hot water.,1
An employee was working from an 8 foot ladder and lost his balance while trying to hold onto a electrical drill motor. He slipped and fell.,1
"An employee was descending an extension ladder after working on a telecommunications cable when he miss-stepped, caught his legs between the rungs, and fell four feet to the ground.",1
"An employee reached in to pull a brick out and got his right arm caught. The employee's injuries included a torn bicep, small cuts and a blood clot in the arm.",1
"Employees were running rods downhole on a servicing rig when the pump hit a tight spot causing slack on the rods. The slack resulted in the rod elevator breaking and allowing the rods to come loose. The rod struck the employee in the middle, right side of the back and knocked him to the ground.",1
"The employee was delivering freight out of a bobtail.  He was using an electric pallet jack to maneuver a pallet of freight onto the lift gate and lower the pallet to the ground.  During this process, he fell approximately 3.5 feet off the lift gate to the concrete drive.",1
A new employee was observing an experienced employee on how to connect a yard mule to a dump trailer. The fifth wheel on the yard mule and the king pin on the trailer did not engage. The driver did not realize that they did not engage and the injured employee was caught between the cab and the trailer. The injured employee was hospitalized.,1
An employee was working on a 110 ton seat belt stamping press. She was manually lubricating the die when the press hit the bottle and pulled her hand into the press amputating part of her right pinky finger.,0
An employee was attaching a bracket to a metal stud with a battery-operated drill.  The drill slipped off the screw and the Phillips head driver bit went into the employee's left ring finger.,1
"On 7/1/15 an employee was working at the Firestone Plant in the scale house, when it was discovered that a gate on the asphalt silo had a broken bolt and was not functioning properly. At ~ 12:40 AM while attempting to replace the bolt, his crowbar slipped and struck him in the face. He was admitted for in-patient hospitalization for a fractured bone above the eye (no eye loss/damage) and a fractured cheek bone.",1
"An employee slipped as he was climbing down a scaffold ladder. He tried to catch himself by grabbing onto the ladder. His left arm hit the ladder clamp, which cut open his left arm (2 inches below his wrist to about 1 inch above his elbow). The cut was approximately 6 inches.",1
An employee was exposed to struck by hazards while operating the break out device.,1
An employee was stung by a bee and had an allergic reaction.,1
An employee was admitted to the hospital after falling from a ladder and breaking a leg.,1
An employee suffered heat exhaustion while loading trucks.,1
"An employee entered an 18-wheeler truck to place a label on a shipping load.  When the employee exited the truck, he closed the truck trailer doors on his left pinky finger.  The finger was medically amputated from the first knuckle to the fingertip.",0
"An employee lifted the hinged cover of a peanut bin/hopper and put his left hand in the bin. A moving auger inside the bin caught his left-hand ring finger and amputated the fingertip. The bin cover was not interlocked, and the production line was not locked/tagged out at the time of the incident.",0
An employee went to help a coworker who was having problems with his machine. The employee opened the guard for the roll machine to retrieve a part. The roller grabbed his gloves and crushed his hand.,1
Employee was exposed to struck by hazards due to not setting the brake on his truck.,1
"An employee was using an alligator shear and reached down to pick up another piece of material while using his right hand to hold himself upright. The shear came down on his right hand amputating three fingers (middle finger, fourth finger, and pinkie finger). Employee was transported to the hospital in an attempt to re-attach his fingers.",1
"An employee was operating a Yale electric stand-up fork truck to move a pallet of veneer from the dryer to the veneer storage room. The fork truck was stationed near a wall. The employee accelerated the fork truck while it was in reverse gear, and he lost his balance. He braced himself by placing his left hand on the outside of the carriage. His hand got caught between the carriage and a wall.",1
An employee was hospitalized for treatment of a foot infection the developed as a result of a laceration by a piece of concrete.,1
"An employee was hospitalized when he fell from the forks of a forklift, striking the forks and fracturing his ribs.",1
An employee suffered a fracture in his back when the mower he was operating slid down the slope on the east side of Building 157.,1
An employee was struck by a Hostler Truck.,1
"On or about July 1, 2015, an employee slipped in the parking lot and twisted her ankle.",1
"An employee was stacking tire rims when a stack began to fall. The employee tried to catch the falling tire rims, which crushed his pinky finger on his left hand. His pinky finger was surgically amputated to the first knuckle.",0
"An employee was installing a tipper on a garbage truck. The tipper slipped and cut his left thumb, which was later amputated.",0
An employee sustained a partial amputation of the right index finger while moving a concrete form.,1
"An employee was performing maintenance on a cotton packer when his finger got crushed, resulting in the amputation of his right-hand pinky finger.",0
"An employee was delivering cargo to a construction site. As he pulled the cargo to the back of the truck with a pallet jack, he felt a sharp pain on his abdomen.  The employee was hospitalized and diagnosed with a hernia.",1
"An employee was removing an automotive lift, when the lift lowered on and broke the employee's arm.",1
"An employee was working on a cutting machine that did not have the blade engaged.  He hit the lever that controls the up and down motion of the machine. Gravity pulled the machine down, and the blade struck his left hand.",1
"Several employees were getting their tools ready for the day after performing JSA at a jobsite outside of Kennedy, Texas. One employee went to uncradle the lubricator from the wire line rig, and the employees put the line through the sheave, which is connected to the wellhead.  The operator watched the weight indicator and pulled 300 pounds of tension on the line, which released the wire line clamp. With the camp being removed manually, the injured employee noted that the wire was wrapped around the handle for the blow-out preventers.  The employee released the wire from the handle; the tension on the wire sling shot the sheave up. The sheave directly contacted the injured employee's right hand and amputated his right pinky through his cloth glove.",1
"On July 2, 2015, at 1425 hours, an employee was cutting inside a water tank on the U.S.S. Bataan at BAE Shipyard in the TITAN Dry-dock when he received an electrical shock from a welding lead. He was hospitalized.",1
"Employees were making up float shoes on the first joint of a casing job. The pipe came loose, swung, and caught one of the employees between the manual back-up tong and the back-up snub line.  The employee was hospitalized and treated for injuries to the chest and colon area.",1
An employee partially amputated his index finger while operating a pneumatic vice.,1
An employee tripped and fractured/dislocated an ankle.,1
An employee was hospitalized after a cownose stingray embedded a piece of barb in the employee's right hand.,1
"An employee was struck by the bucket of an excavator, sustaining broken ribs.",1
An employee's hand was cut/scratched by a piece of metal while cleaning up trash/debris. The employee was later hospitalized for treatment of a hand infection due to the injury.,1
"An employee fell down the stairs, rupturing a tendon in his right knee and requiring hospitalization.",1
An employee sustained a partial amputation to the tip of one of his fingers while threading fabric through a textile machine.,0
An employee cleaning a meat cutting table received an electrical shock on the right hand from a wire that was hanging from a thermostat under the cutting table.,1
"An employee was descending a ladder to enter the lower level of a pump house when a steel hatch fell and smashed the employee's right thumb tip, requiring stitches.",0
"An employee fell in the hallway after losing her balance, breaking her left arm.",1
"On July 2, 2015, at approximately 3:00 PM, an employee fell 6 to 8 feet while working in an elevated man basket attached to a forklift. The employee fractured and dislocated the right shoulder.",1
"Three employees were injured during two separate incidents. 1) On Monday, two employees were injured by steam while performing maintenance on the boiler water feed system in the Building 265 Power House. 2) On Tuesday, a production employee injured his hand and required treatment for cuts while grinding.

Note to user: This record contains two separate events that were reported simultaneously to OSHA by the employer. These events are captured as one report.",0
"On or about July 2, 2015, an employee was operating a press brake when it had a mechanical failure.  The bolts holding the press up sheared off, and the press came down on the employee's right hand, amputating several fingers.",0
An employee was injured when the PIV he was operating collided with another PIV in a cross section between the aisles. The employee injured his left foot and suffered multiple broken toes.,1
"An employee, who was wearing a life vest, fell from the deck of a barge into the waters of the Mississippi River and lost consciousness.  The employee was hospitalized.",1
"An employee walking in the freezer slipped and fell, fracturing his right hip.",1
An employee fell on the stairwell after her heel got stuck in a crack of the rubber grip strip of a step. The employee went down several steps and hit her head on the wall.  ,1
"On or about July 2, 2015, an employee was removing a floor hole cover and fell through the hole.  ",1
An employee degloved his left ring finger when his ring got caught while performing an adjustment on a straight line inserter machine. The employee was hospitalized and underwent a surgical amputation.,1
"An employee climbed onto shelving and fell, breaking bones in his back.",1
An employee's right middle fingertip was amputated while closing the gate to the baler.,0
"On July 2, 2015, an employee was rebuilding a furnace when he was struck on the left hand by a piece of steel beam. His left index fingertip was amputated.",0
"On July 3, 2015, at approximately 4:50 a.m., an employee was injured while operating a battery-operated fork tugger industrial truck. The employee picked up a load of VVTs and was backing up when the stand, which had parts on top, struck the corner of a set of steps. This shoved the stand forward, causing the employee's finger to become crushed between the handrail and the stand.  The employee's right index fingertip was amputated.",0
An employee became dehydrated during work and was hospitalized overnight.,1
"While lowering a swivel arm/gate, an employee's fingertip got caught between the heavy equipment. The fingertip was later amputated.",0
"An employee sawing a femur bone sawed into his/her right index finger, lacerating tendons and requiring hospitalization. No hand guard was worn at the time of the incident.",1
"An employee was involved in a motor vehicle accident on July 03, 2015 at
9:20 am. The employee was stopped at a light. The light changed and the employee started through the intersection when the vehicle was struck by another car turning left. The employee was hospitalized.",1
"An employee was tying a horse to a rail with a lead rope when the horse suddenly pulled away. The employee's left thumb got caught in the rope knot. As the horse pulled, the employee's finger got squeezed between the pipe fence and the knot, amputating her thumb between the first and second joints.",0
An employee was operating a forklift when the unit lost power. The forklift stalled and then rolled back towards some barriers posted in front of the electrical box. The employee stuck his foot outside of the driver's compartment as the forklift approached the barrier. His foot was crushed between the barrier and the forklift.,1
"An employee tripped over a breaker box, fell and hit her forehead, requiring hospitalization and stitches to her forehead.",1
An employee was inside a manhole when a 2x4 fell into the hole and hit the top of his finger that was grasping the ladder amputating it.,0
An employee sorting clothes tripped on an apparel rack. The employee could not get up from the floor after falling and required hospitalization and surgery.,1
An employee's fingertip was amputated when her fingernail was caught by a moving conveyor belt.,1
"An employee was attaching the hitch of a pick-up truck to the tow bar of the air-conditioning unit when his left little finger got caught between both pieces of equipment, resulting in the finger being amputated 1/2"" at the tip.",1
An employee was taste testing salami to provide advice to customers about various products sold within the deli. She suffered an esophageal tear from choking on a piece of the salami and was hospitalized.,1
An employee amputated a piece of his right pinky finger while cutting a piece of wood.,0
An employee was struck by a falling piece of metal.,1
An employee was troubleshooting an oil rig top drive while the main drive was running. The employee sustained an amputation.,1
"An employee rolled his knee while kneeling in his work truck, resulting in a knee infection that required hospitalization.",1
"An employee was moving chem-grate flooring through a door when the employee's fingers got pinched between the door and the metal plate, causing an amputation.",0
An employee suffered second and third degree burns from hot oil.,1
"An employee was working with a perforating gun on a work bench. He turned the gun and it skipped off the roller wheels and fell on the edge of the table, amputating the index and middle fingertips on his right hand.",0
An employee was hospitalized when the ladder he was working on slid out and he fell approximately 20 feet.,1
"An employee was helping a patient get into position for an MRI. While moving the patient, the employee heard/felt a ""pop"" in the lower right side of her back. She was hospitalized.",1
"An employee was carrying some product from the cooler to the sales floor. The employee slipped on a piece of garbage on the floor, fell to the floor, and suffered a broken kneecap on her left leg.",1
An employee was injured when he fell while connecting steel on the FMC Tower project in Philadelphia.,1
"On 7/4/15, at about 9:40 p.m., an employee was walking beside a push back vehicle while pushing back an aircraft. While the employee disconnected aircraft from the push back vehicle, the tow bar fell and peeled the skin back on the employee's left ring finger. The employee was hospitalized for a fracture and required surgical reconstruction of the fingertip.",1
An employee was hanging from the ceiling with silk drapes and practicing her upcoming performance when she fell and hit the floor below.  She was approximately 20 to 25 feet high.,1
An employee slipped on wet ground while checking a dewatering pump. He hurt his back and was hospitalized.,1
"An employee was assigned to blow dust off the fan blade in a dust collector.  He shut off the fan, opened the inspection door to access the fan, and saw that the fan was still moving slowly.  A V-belt and pulley system was used as the drive system for the fan, but the guard was not in place.  The employee put his hand into the drive system to completely stop the fan. His hand got caught between the V-belt and pulley, amputating half of his ring finger and the little fingertip on his right hand.",0
"Employees were rigging down the workover rig at about 11:30 a.m., on July 5, when an employee's right thumb and first finger were caught between the derrick tip section and stop plate. The employee's thumb had to be surgically amputated.",1
An employee's left finger was amputated while changing optical fiber spool for rewinding.,0
"An employee was using a spanner wench to remove a cylinder when he slipped, falling to the ground. He fractured his left hip and was hospitalized.",1
"On July 5, 2015, an employee got pinned up against a table lift and a Toro workman and was hospitalized.",1
"An employee fell and fractured bones, requiring hospitalization for treatment.",1
An employee was adjusting the blade on a bagel slicer when she cut off the tip of her right middle finger.,0
"An employee was applying ""chalks"" behind a plane engine after the aircraft landed. The employee was blown over by a blast from the plane engine, resulting in a shoulder injury and hospitalization.",1
"An employee was on a 6 foot ladder repairing an HVAC unit.  The employee started to climb down the ladder, lost his balance and fell breaking his left leg.",1
An employee was greasing a front end loader when grease from the grease gun punctured and entered the employee's hand.,1
"At or about 1:40 p.m., on July 6, 2015, an employee received serious back and spinal injuries as a result of a fall from a swing set. The employee was hospitalized and had to undergo spinal surgery.",1
"An employee tripped and fell while carrying mail, breaking her left hip.",1
The shoe in the powdered metal press was hanging up so the employee who is a set-up trainee went to trouble shoot it.  The employee unplugged the plant airline to the moving part (shoe). The employee then plugged in the cleaning airline to the shoe. The cleaning airline has much less pressure than the plant airline. The shoe did not move as it should.  The employee tried to maneuver the shoe with her hand and it would not move. The shoe then moved forward and caught her fingertip between the shoe and the die resulting in the amputation of the left middle fingertip.,0
An employee was on the roof responding to a customer's complaint about the roof. He fell through a skylight to the warehouse area below.,1
An employee was working at the grinding machine and making an adjustment/alignment. The employee's finger got crushed between two moving parts.,1
An employee was hospitalized after the powered industrial truck that was being loaded onto a trailer fell off the back of the trailer.,1
"An employee was transporting a patient to a doctor's appointment. When she missed a turn, the patient became violent and bit off the employee's nose.",1
An employee fell approximately 12 feet from the top of the tanker truck he was washing injuring the left shoulder and upper ribs and suffering a facial fracture.,1
An employee's left ankle was crushed when an aerator that he was walking down from a truck fell on him. He was hospitalized.,1
An employee was hospitalized when a spider bite or puncture wound received while performing landscaping duties became infected.,1
"While attempting to remove a part from the mold of a ceramic press, an employee sustained an amputation of the left middle and ring fingers.",0
"An employee was helping a forklift operator by watching the operator as he pushed a batch of green wood into a dry kiln. The wood was on a metal crate on rail wheels. The employee had the forklift operator stop to check the wood and a 4 x 6 board fell from the top of the stack, which was about 10 to 15 feet in the air, and hit the employee in the head. The employee was wearing a hardhat at the time of the incident.",1
"An employee was unloading trusses and operating a trailer. While dismounting the delivery truck, he hurt his ankle.",1
"An employee working on a swing stage scaffold was lowering the scaffold when his left fingers got pulled into the pulley, partially amputating his middle and index fingertips.",0
The employee was in a bucket truck pulling wire. The employee touched a live energized line and was hospitalized.,1
"An employee was operating a hammer mill that kept getting jammed. The employee shut down the machine and opened the access door, which had two hinges on both sides to allow the right or left side to open. The employee had removed/unlocked both sides, which caused the door to fall forward. The employee attempted to catch the door, and his right hand got caught between the metal mill door and a metal support beam. The employee was hospitalized and required surgery.",1
"An employee was removing a full ""super sack"" from beneath the dust collector. A red light indicated a blockage or full sack. The employee attempted to clear the blockage. She reached up into the rotary valve, which still had power. A paddle in the valve caught her right thumb.",0
An employee running from a dog jumped onto a car and crashed through the windshield.,1
"An employee was on a canning line, blowing down station with an air gun, and the right hand drifted into the conveyor subsequently catching the ring finger on the conveyor resulting in injury. At the hospital, part of the finger needed to be amputated to close the wound.",0
An employee received an electrical shock of an unknown voltage while trimming trees in close proximity to power lines.,1
"An employee was working on a paper plate machine. The machine jammed; it stopped feeding paper, but was still running. The employee opened the safety gate on the cutting die to stop the machine. When the employee opened the safety gate, the safety switch engaged to de-energize the machine. He reached into the cutting die, and his left-hand middle finger was pinched between two parts of the cutting die. He was hospitalized, and his fingertip was later medically amputated.",0
"An employee was operating an electric pallet jack. She got off the pallet jack and had her hand on the controls. She accidentally twisted the handle and caused the pallet jack to reverse towards her. The pallet jack ran over her right foot, and then smashed her left foot between a pallet and the jack.",1
"An employee banged her eye on a metal rack while stowing 
yga mats.",1
"At 2:30pm on 07/06/2015, an employee was working on the Pines Bender making metal parts. He loaded a part into the pressure die and held onto the part with his left hand so it wouldn't ""whip out"" as the pressure die closed. The part was not positioned against the locate, and his pinky finger was pinched between the part and the pressure die as the pressure die closed amputating the fingertip.",0
"An employee was delivering mail in an apartment building when he slipped on the wet floor and fell, obtaining injuries which resulted in his hospitalization.",1
An employee was hospitalized for heat exhaustion/kidney failure.,1
An employee came in contact with hot water (greater than 105 F) when a hose split while the employee was priming a pump in the neutral plant. The employee received 2nd and 3rd degree burns to his back and upper legs covering approximately 13% of the right side of his body.,1
"An AME palletizing machine had been installed to palletize bottles/stack them on plastic trays. An employee noticed that the machine had trays that were sideways. He opened the gate and entered the machine to straighten the trays. The crane inside the machine activated while he was inside, striking him and crushing him against the side of the machine.",1
An employee was operating an alligator shear to cut up catalytic converters for scrap. A piece of sharp metal popped up and severed the employee's left middle fingertip.,0
"An employee was using a ladder to gain access to a roof. As he stepped on to the roof, the ladder slipped out from under him. He fell about 8 feet and was hospitalized with a broken pelvis.",1
"On or about July 7, 2015, an employee received a finger amputation while operating the PTO fertilizer.",0
An employee was operating a CNC Bender (press brake) machine and activated the machine while his thumb was in the point of operation.  The employee's skin and thumb nail were removed.,0
"An employee had been framing the roof deck and was tied off using a personal fall arrest system.  A violent  thunderstorm occurred, and the employee began to exit the roof.  He unhooked his lanyard when he got within 2 feet of the extension ladder used to access and exit the roof. He slipped and fell 12 feet to the concrete floor below and sustained a head injury.",1
Employee performing trailer disassembly suffered from heat exhaustion.,1
An employee was interacting with a table saw when the employee's hand became entangled. Multiple fingers were amputated.,1
"A truck driver was making a delivery at another company with a load of material on a flat bed truck. While waiting on a forklift, the truck driver began unloading the pallet by pulling on a strap. The strap broke or he lost his grip, which caused the employee to fall onto the ground landing on his right hip. The injured employee required surgery to repair the hip.",1
An employee was injured when an excavator operator backed into him. The employee sustained injuries to his left leg and ankle and dislocated his left shoulder. The injured employee was hospitalized.,1
"On July 7, 2015, an employee fell from a 34-inch high platform to the concrete floor below, fracturing his right arm (humerus) and T1 vertebra.",1
An employee of a tree service company fell approximately 30 feet while trimming a tree.,1
An employee amputated a fingertip when a tree fell on a telephone wire he was repairing.,0
An employee was using a Skilsaw to cut wood to form a sidewalk. The wood got caught in the saw and pulled the employee's hand into the saw. The employee's left thumb was cut off at the first knuckle.,0
An employee was bucked off his horse and hit the floor while penning up the cattle. He injured his back and ribs and sustained a possible concussion. He was hospitalized.,1
"On 7/7/15, an employee helped a coworker load a flatbed truck. The load already on the truck shifted, and the stacked material dislodged. The galvanized material fell and struck the employee's hard hat and his ribs. He was hospitalized for observation and testing.",1
An employee was lifting black pipe. A sharp edge of the pipe cut through the employee's gloves causing lacerations.,1
"An employee fell backwards off of ladder, striking his head and fracturing his skull.",1
An employee attending a meeting in a conference room tripped over a data port located on the floor; a cover was missing over the data port at the time. The employee was hospitalized and underwent surgery for a fractured hip.,1
An employee suffered heat exhaustion on or about 07/07/15 while measuring post-tension cables on the 18th floor of a new high-rise building construction.,1
An employee was cutting bands off of tubing to separate the electric cable from the tubing when the band cutter came up and hit him in his left eye. Eye protection was not worn at the time. He was hospitalized.,1
An employee operating a stand-up pallet jack was struck by a sit-down lift truck.  The employee operating the pallet jack was hospitalized with a fractured left ankle.,1
An employee sheered off the upper tip of his left ring finger while relocating an entry stand under an aircraft.  The employee did not notice his finger was positioned at a pinch point between the entry stand and the aircraft shoring foundations.,0
"On or about July 7, 2015, an employee, sweeping out a semi-truck trailer, was injured and hospitalized when he/she was caught between the wall of the trailer and a fork lift truck that was loading a bale of paper into the trailer.",1
"A truck door closed on an employee's finger, lacerating the middle fingertip on her right hand.",1
An employee was found lying on the floor inside the Wal-Mart Distribution Center. He had been unloading boxes and materials from a conveyor and loading them into a truck. He was in and out of consciousness and was initially diagnosed as being dehydrated. The employee was hospitalized for further testing.,1
A employee was hospitalized for heat stress.,1
A temporary employee's nail bag caught on the brick layer scaffold he was working from causing him to lose balance and fall approximately twelve feet to the ground below fracturing his hip. The employee was admitted to the hospital for surgery.,1
"A crane was removing a heater from a platform. The heater was lifted up to tighten the chains before resuming the lift, but the heater stack (7 ft. pipe) broke off of the heater. The broken piece struck an employee, who suffered a severe concussion and broken bones in the neck.",1
An employee slipped and fell entering the restroom and broke her hip.,1
An employee had two fingers partially amputated while working on an unloader boom. The employees fingers were caught between a chain and sprocket.,1
"An employee was taking down a gutter on the edge of a residence's roof and fell approximately 14 feet to the ground, fracturing his right wrist. ",1
"An employee was operating a stand-up powered industrial truck on a loading dock. The employee backed the powered industrial truck into a metal column. The employee's leg was impacted and caught by the column, resulting in multiple fractures.",1
"An employee was establishing temporary power for office trailers by installing a ground lug on a ground bar on a motor control center (MCC). The employee used a wrench to tighten the lug and contacted an energized circuit or an energized buss bar of the 480-volt MCC. 

The employee was hospitalized.",1
An employee was hospitalized for heat stress after working in Hull TC 74 installing a sprinkler system.,1
"An employee was working in a ceiling crawl space installing an air line. While attempting to switch position, he lost his balance and cut his left wrist with a utility knife. Because the knife hit an artery he was kept over-night while surgeons determined whether or not surgery would be needed.",1
An iron worker assisting in the unloading of large sheets of glass from a tractor trailer was struck by a pane of glass pinning him to the ground.  The worker was later hospitalized as a result of his injuries.,1
"An employee slipped and fell while climbing an A-Frame ladder, landing on his right side. He was hospitalized for fractured ribs.",1
"An employee was delivering aluminum to a customer. While he unstrapped the aluminum from the wall of the trailer, the pallet fell on his right foot, causing  a fracture.",1
An employee suffered burns while trying to repair a water heater. ,1
"On 7/7/15, an employee began cramping and felt dehydrated. He went back to an office location and the cramping worsened. The employee was hospitalized.",1
An employee suffered a broken ankle as the result of a forklift accident. ,1
An employee was repairing a compressor on a refrigerated truck.  The compressor pinched his hand between the compressor unit and a truck body.,1
An employee was on a garbage pickup route in Warren County when he started cramping. He was  hospitalized for dehydration.,1
"An employee suffered an amputation of his right middle finger while setting up a printing press on or about July 7, 2015.",0
An employee attempting to remove plastic from under a conveyor injured his right hand and sustained an amputation to his right pinky. The conveyor was in operation at the time.,0
 A Border Patrol Agent was chasing suspected illegal aliens when he passed out due to dehydration and hit his head.,1
An employee was changing out a belt on an air handling unit when the belt and pulley caught and amputated the employee's left pinky finger.,0
"An employee was cutting foam board with a concrete saw when the saw kicked back. The blade impacted his arm, causing a laceration that required hospitalization.",1
"An employee pinched his finger between a cell and the cell rack while performing an inspection and moving a cell into the cell rack with a crane. In this process, the cell turned and the finger got caught between the cell handle and the rack that it sits on.",0
"An employee was cutting a piece of wood with a circular saw when the cuff of his shirt sleeve got caught in the saw blade, causing it to kick back on him and cut his right forearm. The employee had surgery to repair his arm.",1
An employee received a severe laceration to her arm from broken glass when attempting to stop a shoplifter exiting the establishment with stolen merchandise.,1
An employee fell through a roof and injured his back. He was wearing a PFAS at the time.,1
"An employee got caught between a trailer and truck while directing the truck driver to back up.  The employee's leg was crushed, and the employee was hospitalized.",1
"An employee injured his right shin while positioning a concrete form structure to weld in place. As the employee was lowering the structure, it slipped and brushed against his right shin. His injury later became infected, requiring hospitalization for observation and treatment.",1
An employee was operating a power press when he started feeling ill.  He notified his supervisor that he was not feeling well and was taken to a break room to cool off.  His condition did not improve and he was taken to a medical clinic for treatment. At the clinic he received IV treatment and the doctor determined that he was suffering from severe dehydration and kidney failure. The employee was admitted to a hospital.,1
"An employee was using a grinder when a piece of the grinding wheel broke off and struck him in the leg, causing a laceration and fracture. The employee was hospitalized.",1
An employee's left index fingertip was cut while using a chop saw.,0
An employee was injured from a fall from a ladder and was hospitalized overnight. ,1
An employee was handling deck lines when his left ring fingertip got caught in a bit of the rope. There was no bone loss.,1
An employee sustained a broken leg when 17 sheets of drywall fell on him as he was attempting to look behind them.,1
An employee loading high-pressure iron into pipe racking suffered a fingertip amputation after his left pinky finger got caught between the pinch point of the iron and pipe racking.,0
An employee was helping a forklift driver load wood onto a trailer when the lumber struck him and pushed him against other material.,1
An employee put his finger in a small 1-inch hole in the side of an enclosed conveyor. His fingertip was struck by a conveyor flight.  One-eighth of an inch of his right index fingertip was damaged.,1
"An employee was operating an electric pallet jack carrying three pallets of flour when she lost control of the pallet and ran into another forklift operator. She stuck her left foot out and sustained a crushing injury, requiring hospitalization.",1
"An employee was cutting plywood with a skill saw. He was holding the plywood with his left hand. The saw kicked back, and the lower exposed blade amputated part of his left pinky fingertip and lacerated his ring finger.",0
"While cleaning the blade on a slicer, an employee's hand slipped and got caught on a heating element. The employee was unable to free his hand from the heating element before the blade rotated, amputating a finger.",0
An employee operating a press machine for 45 minutes was hospitalized from heat stress.,1
"An employee was making a delivery at Case Western Reserve. After unloading his truck, he began to lower the bay door. As the door lowered, his right middle finger got pinched in the door panel, partially amputating the finger.",0
"An employee delivering pizza slipped on a customer's driveway and injured their back, requiring hospitalization and surgery.",1
A maintenance employee was working to clear a clog in the bottom of a cyclone. He had gone through the lockout/tagout procedure twice and asked the operator to control run the machine to unjam the clog. The employee attempted to clear the jam inside the feeder when his glove got caught and his left middle fingertip was amputated. He was hospitalized for treatment.,1
An employee was adjusting the closer on an egg-packing machine when his finger got caught in the sprocket and chain system. The machine was not locked/tagged out at the time.,0
"The employee was working on Line #2. The employee turned on the Mirapack Machine. During startup, the employee had her left hand in an area that was not guarded. The employee's left tip under portion of the finger was amputated. The employee was treated in the Emergency Room and was not hospitalized.",0
"On July 8, 2015, at approximately 6:00 p.m., an employee was struck in the face by a high-pressure hose. The employee suffered multiple facial fractures and was hospitalized.",1
An operator was carrying steel tubes using a forklift. The load slipped off the forks and landed on another employee's right foot. The employee was taken to the hospital where all of the toes on the right foot were amputated.,1
An employee was moving a steel beam on non-gravity rollers when his left middle finger got caught between the roller and steel beam.,0
"On July 9, 2015, while operating a resaw, an employee's hand got caught in some gears, resulting in the loss of his right ring finger.",0
"An employee was greasing a backhoe with a grease gun. The grease fitting did not fit, and the gun popped and hit his right-hand palm. The employee was later hospitalized for a minor surgical procedure to flush the wound.",1
An employee fell off the back of a truck/loading dock while working.,1
"An employee went  to perform maintenance on a commercial natural gas oven. He opened the outer access door to the oven and went inside. An explosion occurred, and the employee suffered  burns on his arms, legs, and sides of his body.",1
"An employee sustained a puncture wound to the left forearm on July 7, 2015. The employee was later hospitalized for treatment when the hand and forearm became swollen.",1
"On 07/09/2015, an employee delivering a package to a residence was bitten on both hands by the inhabitant's dog. The employee was later hospitalized when both hands became swollen.",1
"An employee was attempting to inventory drums that were behind some lead blocks. He climbed over the plastic-covered lead blocks to get closer to the drums for counting. He fell, hitting and breaking two ribs on the blocks. He was eventually hospitalized.",1
"While delivering a lawnmower to a residence, an employee injured the left ankle, requiring hospitalization and surgery.",1
An employee cut their thumb with a portable magnetic drill while drilling a hole in steel deck. The cut resulted in the amputation of the left thumb.,1
"An employee was using a nail gun during a re-roof job at a condominium. Walking on the roof deck, the employee stepped on the rope and his ankle rolled. He fell on the roof deck and shot himself above the knee.",1
An employee cut three fingers while dadoing.,0
"An employee's foot got run over by a forklift, requiring the amputation of one toe and hospitalization.",1
An employee was experiencing cramps throughout the day. The employee was hospitalized with heat stroke.,1
An employee was operating a table saw when he cut his left thumb and was hospitalized.,1
"An employee was repairing a seal on a valve operator. He placed the drum cover over the actuator piston using an overhead crane and was manipulating the drum while operating the crane controls. While attempting to lower the drum the final 2 inches, he inadvertently pushed the wrong button on the hoist control, causing the drum to move upward. As a result, his left thumb was pinched between the base plate and drum cover. There was no amputation.",1
An employee reported heat related symptoms early evening during the shift. The employee sought medical attention after work and was hospitalized.,1
"An employee was operating a press brake to bend metal trim. His right thumb was in the machine opening at the time. When he cycled the machine, it closed down the safety stop, which lacerated his thumb but did not crush it all the way. Part of his thumb bone had to later be surgically amputated.",0
"An employee in the maintenance shop amputated the top portion of his finger on July 9, 2015, and was hospitalized.",1
An employee operating an assembly press reached into the press to adjust a flange; his finger was pinched in the press.,0
"An employee was on an A-Frame ladder installing a 20-pound piece of aluminum to a light fixture.  The ladder buckled and the employee fell from the second rung of the ladder to the floor, hitting the back of his head on the ground. He was hospitalized.",1
"An operator was unloading pipe from a truck using an excavator. A sling was attached to the pipe. When the operator picked up the pipe, it turned 180 degrees and struck the injured employee, fracturing his pelvis.",1
"An employee was performing a hydrostatic pressure test on a hose when he received a chemical burn from a clear odorless liquid, requiring hospitalization.",1
An employee amputated the left middle fingertip when he tried to clear a clog on machine #4.  He applied pressure to the foot pedal of the machine which actuated a machine part cutting off the tip of his finger.,1
An employee was hospitalized as a result of dehydration.,1
An employee climbed on top of a trenching machine to stabilize it. The employee was thrown off the machine when it became unstable.,1
"An employee working on power lines in an aerial lift in Hinesville, GA became ill. The employee came down, drank water, and went home. He awoke the next day still feeling ill and went to his personal doctor. He was later admitted to the hospital.",1
"On 7/9/15, an employee broke a bone in his face when the string trimmer he was using hit him in the face while he attempted to adjust the string.",1
An employee on the bed of a stationary work truck lost his balance and fell to the ground below.,1
"An employee was drilling holes with a drill press when his glove got caught in a drill bit, amputating two fingers.",1
"An employee tried to get into the cab of a crane by climbing a fixed ladder.  As he tried to grab the rail, it slipped and he fell to the side.",1
"An employee suffered a left pinky finger amputation when he walked over a skid and tripped over a 2x4, rolling and landing on his finger.",0
"At approximately 12:00 PM on July 9, 2015, an employee fell off of a moveable ladder/platform while waxing the top side of a wing on a corporate jet.  The employee's boot tread got stuck in the tread on the stairs, causing him to lose his footing and fall approximately 48 inches to the ground below. He was hospitalized and sustained three fractured ribs, and possible pelvic and clavicle injuries.",1
"On or about July 9, 2015, an employee suffered an amputation to his left thumb while performing an unjamming activity on the graham cracker packaging machine.",0
An employee was hospitalized because of heat stroke.,1
An employee was feeling dehydrated and experiencing cramping after coming down from pressure washing the interior of a water tank. The employee was hospitalized for symptoms related to heat exhaustion.,1
"At 2:30 AM on 7/9/2015, an employee's right arm was crushed by a pizza bread-making conveyor while she was cleaning the conveyor rollers. She required hospitalization and surgery.",1
"An employee was hospitalized after falling from an elevated surface and sustaining injuries to his head, collar bone, and ribs.",1
"An employee slipped on a frayed carpet and fell down the stairs, injuring the left leg.",1
An employee was stung by an unknown insect on his ear. The injured employee had a severe allergic reaction and was found by a passerby on the ground.,1
An employee slipped the thoracic disc in her back while helping a driver lift a package into the truck.,1
"An employee was using an electronic power jack to set up pallets when he 
lost control of the jack because of wet conditions. The jack crashed into nearby pallets, causing them to fall on the employee.",1
"An employee was attempting to clear a clog in the rotary air lock of a central vacuum with his fingers. The first and second fingertips on his right hand were amputated, with no bone loss, in the dryer area.",0
An employee was transferring a patient into the Cat Scan ER room when she closed the cat scan door (double door) on her hand; her left index fingertip was amputated.,0
An employee sustained second degree burns that were caused by a pressurized hydraulic system.,1
"An employee was injured when a powered industrial vehicle overheated, spraying him with hot water/anti-freeze. The employee received burns to his torso, arms and groin requiring hospitalization.",1
An employee was struck by a car exiting the garage and onto a driveway. The injured employee was walking behind the vehicle as it backed up to change direction.,1
An employee sustained a broken wrist when struck by metal cable.,1
"On July 10, 2015, an employee was reaching for a box of bags in the storage room. She tripped on a box and fell to the floor below, sustaining a concussion and injury to the left arm and hand. She was hospitalized.",1
An employee was injured when aluminum siding he was pulling fell and severed a tendon in the right arm.,1
"An employee offloading rebar from a flatbed truck lost his balance and fell off the truck, breaking both bones in his leg and requiring surgery.",1
An employee's left small finger was amputated while operating an overhead hoist. The equipment was not locked or tagged out and was unguarded at the time.,0
An employee fell backwards off of a ladder while removing labels and decals from the back of a truck and suffered a head injury.,1
"An employee was using a step ladder to help erect a pole barn. He fell off when the step ladder tipped, fracturing a heel and some ribs.",1
"An employee fell approximately 9 feet while descending a fixed industrial ladder, fracturing the left knee.",1
An employee's fingers were caught between the trimmer and stacker resulting in injuries that led to hospitalization and surgery to repair his injured right ring and pinky fingers.,1
An employee was at a customer location unloading material. The tote he was using had a wire that punctured his hand. The next day his hand became infected and he was hospitalized overnight.,1
"While tearing off the old (rubber) materials on a flat roof that measured 20 x 100 feet, an employee stepped on a weak area and fell approximately 13 feet to the lower level.",1
An employee was hospitalized due to an allergic reaction to a chemical used to clean a patient's room.,1
A maintenance employee was troubleshooting batteries for a sprinkler diesel pump when the battery exploded acid into the employee's face. The employee sustained burns.,1
An employee standing adjacent to an asphalt dump truck received an electric shock that rendered him unconscious when the bed of the dump truck contacted an overhead electric line. The ground on which the injured employee was standing was wet at the time of the incident. The injured employee suffered burns and blistering on his legs and damage to the big toe on his right foot.,1
An employee was walking out of the kitchen area and lost her footing. She fell and hit her head on the kitchen sink.,1
An employee was injured after tripping over a cable on the floor.,1
An employee cut his upper left leg with a circular saw.,1
"An employee was moving high chairs while walking backwards when she slipped, fell, and broke her pelvis. She was hospitalized.",1
An employee was using a creeper under a truck and hit is head on a steel beam causing a ruptured disk in his neck.,1
"An employee was carrying a piece of hydraulic shoring on his shoulder and it slipped. He grabbed it and pinched his finger, amputating the tip.",0
"Two employees were working together, replacing hinges and remounting a dump trailer door. After welding the door, they checked the alignment and the weld. The dump trailer door fell off and hit one employee, injuring his shoulder, wrist, and pelvis.",1
"An employee working for Waste Management of Youngstown lacerated his left wrist while collecting trash. The employee attempted to collect a TV for bulk pick-up, which broke apart in his hands and caused a laceration.",1
An employee was unhooking the trailer from the tractor of a tractor-trailer and slipped. The truck ran over his right foot. His left wrist was broken when he fell.,1
An employee was working on a roof when debris came in contact with an overhead wire causing an arc flash that struck the worker. He fell from the roof.,1
An employee amputated the left thumb by using an unguarded table saw.,0
An employee was changing a rocker arm on the Line #4 Pre-Shaker. The employee experienced a partial amputation when his right hand middle finger was caught between the shaker table and the rocker arm.,0
An employee working inside a store room located in the basement of the facility tripped over a wheel of a cart and fell. The employee sustained injuries to her left hip and shoulder requiring surgery with hospitalization.,1
An employee was bitten by an insect or spider. The bite area became infected. The employee was admitted to the hospital for surgery to clean out the infected area.,1
"An employee was dispatched to replace a telephone pole after a car accident. While removing the old pole, it snapped approximately 3/4 up causing that section to fall and strike the employee on the left shoulder. The employee was taken to the hospital with non life threatening injuries.",1
"An employee was climbing a fixed ladder approximately 28 feet high and fell from an unknown distance to the floor below.  The employee suffered a head laceration, multiple skull fractures and a blood clot behind an eye. The employee was hospitalized.",1
A maintenance man removed a guard without LOTO and his left pointer finger was amputated above the first digit.,0
An employee was sitting down at the Service Operations Desk when he began to feel dizzy and light headed. When he got up he fell to the floor of the service drive. After being assisted by the other associates he was transported to the hospital and diagnosed with heat exhaustion. The temperature at the time of the incident was 86 degrees with the previous 6 hours being between 89 and 91 degrees.,1
A meat cutter was cutting meat when he sliced off the tip of his left pinky finger.,0
"A motorcycle entered the work zone and struck an employee who was cleaning up a pot hole. 
The work zone had TCD.",1
An employee was pulling a manual cart with merchandise and caught the back of his foot on the cart. He fell backwards causing a broken hip and abrasions to his head and left forearm. The employee was hospitalized.,1
An employee was doing decking work at an apartment complex being constructed. The employee stepped onto an unsecured truss and fell approximately 14 feet. The employee suffered head injuries and was admitted to the hospital for treatment.,1
An employee was hospitalized due to dehydration.,1
An employee was exposed to a struck-by hazard when colliding with the bucket of a Bobcat.,1
A warehouse worker amputated his left index finger while loading merchandise from a forklift to a truck at the loading dock.,1
A maintenance employee was assisting another maintenance employee in repairing/replacing a belt on a dryer fan.  He was checking the tension of the belt while the machine was slowing down after being shut down and caught his left hand in the pulley amputating the left thumb tip approximately half way down into the nail.,0
An employee received 2nd and 3rd degree burns when operating a forklift truck to unload polystyrene rolls from a trailer. It is believed a propane pocket was ignited by static electricity.,1
An employee removing a pallet jack from a pallet slipped and struck his right knee on the pallet jack. The accident occurred on or about 8:35pm on 7/12/15. The employee was admitted to the hospital overnight.,1
A sanitation employee was underneath a scissor lift used for lifting pallets preparing to clean the area when a different employee unknowingly lowered the lift onto the employee under the lift consequently fracturing her right lower leg and dislocating the left clavicle.,1
"An employee fell from a drop off, approximately 10 ft., while taking down a tent.",1
An employee slipped on water and fell in a hallway injuring her knee. The employee was hospitalized and requires surgery.,1
Employee performing warehouse work injured his left leg when struck by another employee operating a forklift.,1
"A card machine operator assisted a technician who was trying to free up a machine that was in the choke position. When the machine was freed, the employee's right index finger was amputated when it was caught between a belt and pulley.",0
"An employee placed a coffee pot on the counter of the Tiki Bar. When she turned around and bent down, she accidentally struck the counter causing the coffee pot to fall and hit another counter, spilling hot coffee onto her legs and back. She was hospitalized with second degree burns to the back of both legs and her back.",1
Employee fell while descending a movable ladder with boxes of coffee makers and fractured her left knee.,1
"On July 9, 2015, an employee was providing paramedic services at the home of a patient. While attempting to lift the patient from the floor of a chicken coop, he slipped and fell on his posterior. He got up and continued working. Later, he reported increasing pain and bruising from his fall to his employer. He went to the emergency room and was admitted to the hospital for vitamin K therapy to control muscular bleeding.",1
An employee was mauled by a Staffordshire Bull Terrier that was kept in the office unsecured resulting in injuries to both arms that required surgery and hospitalization.,1
An employee was repairing equipment in the waste water treatment room. The employee had to go up and down stairs fifteen times to drain water from equipment. The waste water treatment room is very warm.  The employee was sweating a lot and vomiting. ,1
"An employee was water blasting inside the economizer on tubes with a gun at water pressures of 3000-8000 psi when the control to the gun broke. The employee lost control of the gun and the water pressure struck the employee's inner left thigh, causing severe lacerations.",1
An employee sitting on a nursery cart stood up and the cart rolled away. The employee fell to the floor and fractured a hip. ,1
An employee was walking down some outside steps when he missed a step and fell fracturing three ribs and suffering a punctured lung.,1
A letter carrier was hospitalized for dehydration.,1
"An employee climbed a fixed ladder to gain access to a roof. When he approached the top of the ladder, he opened a hinged lid and proceeded to climb up the ladder. The hinge failed and the lid struck the employee in the head causing him to fall approximately six feet to the ground below. The employee received a laceration to the face, contusions and bruising to the right shoulder, elbow and knee, and fractured his right ankle. The employee was transported to a local hospital where he was treated and released.",1
A worker was moving plastic totes around when he lost his balance and his knee gave out. The injured employee was admitted to the hospital for surgery.,1
An employee was feeding two strips of narrow pieces of steel into a reel. There were some cracked edges on the strip of metal. His hand was pulled toward the spacer causing his finger to get caught in/between the spacer (metal disc) and the steel strip that cuts the steel in the over arm (part of the reel/guide to keep cut straight). This occurred at the 72 slitter on the exit reel.,0
"An employee, pulling a tray of dry goods out of the rear of his truck, lost his balance and fell from the truck. The employee sustained a closed head injury.",1
An employee amputated four fingers on the left hand while using a total positioning saw.,1
The injured employee was working the 2nd shift (2:30pm - 11:00pm) packaging bags of lime (material). The employee's arms came in contact with the lime.  He was later hospitalized.,1
An employee opened the back door of a semi trailer and an unsecured bundle of cardboard weighing approximately 500 pounds fell on him.  The employee was admitted to the hospital.,1
An employee fractured a knee cap when assisting nurses to put a patient back to bed.,1
The employee sustained lower back injuries when the yard dog that he was driving turned over. The employee was hospitalized after the incident. ,1
"On or about July 13, 2015, an employee was hospitalized after being involved in a robbery.  The employee suffered chest pains and a panic attack.",1
An employee suffered a fractured left forearm while using a crowbar to clean debris from a conveyor in the shredding area.,1
A letter carrier was bitten by dog. The carrier fell and injured a wrist.,1
A truck driver was closing a trailer roll up door when his hand slipped off the door strap and he fell to the ground injuring his back.  He was hospitalized.,1
"An employee was working with an impact hammer when the bit got stuck. The employee twisted the hammer to loosen it and got his right hand ring finger caught between the hammer and the scaffold rail. The employee freed his hand, but his glove got caught tearing skin from his fingertip.",0
An employee pinched two fingers between the cable and pulley of a portable belt conveyor resulting in an amputation injury.  The motor was not running at the time of the incident.,1
"An employee tripped over his own feet and fell, fracturing his hip and requiring hospitalization.",1
Employee received electrical shock and burns while working on a 7K distribution panel.,1
"An employee was placing an epoxy mixture in a hole.  Because of vibration, the employee was struck by the epoxy grout under his right arm and side.",1
An employee operating a hand controlled forklift to remove pallets from a printing press fractured a leg when his leg was caught between the moving lift and a stationary I-beam guard.,1
An employee received a finger amputation while attempting to trouble shoot a boring machine that would not start. ,0
An employee was working next to a conveyor belt. His hand was caught in the rotating roller which pulled his arm through up to his elbow. He was hospitalized for damage to his tendons as well as abrasions.,1
"Two operators were attempting to clear a ""down bottle error"" on the blow molding machine. They opened an interlock door and were looking into the bed area. One employee leaned on a metal plate that guides the bottles. The pressure from the leaning employee released a metal flap that caught the employee's right middle finger.",0
An employee was checking lights with the use of a scissor lift that was extended approximately 19 feet. The scissor lift was struck by a bridge crane. The employee fell with the lift resulting in a break to the employee's left femur. The employee was hospitalized.,1
On 7/13/15 an employee was hospitalized due to heat exhaustion and dehydration.,1
An employee suffered heat exhaustion and was given IV fluids. The employee was kept in the hospital for observation.,1
An employee suffered a partial amputation while operating a power handsaw (cutting clips out of 2 X 4). He was cut when he attempted to unjam the saw that kicked back and cut his left thumb below his nail 45 degrees.,1
An employee was setting up a core machine and became caught in the machine.,1
An employee fell approximately 15 feet off an unfinished grating on a catwalk and broke a leg. The fracture required surgery and hospitalization.,1
A driver was on his route and called management to report he was not feeling well. Management picked up employee on route and took him to the hospital because the employee was suffering from a heat related injury. The employee was hospitalized.,1
An employee was preparing for work at the line 4B tender clipping station. She was adjusting her work stand to the correct height when the stand slipped out of her hand. Her left middle finger was pinched between the work stand framework and the framework of the cone line. Her left middle finger was amputated between the nail-bed and first knuckle.,0
An employee noticed a hydraulic leak and went to investigate the area where the hydraulic lines attach to the truck. The employee placed his hand in an access point. The boom of the truck came down and crushed the employee's fingers causing an amputation. The employee was taken to the hospital for treatment.,0
An employee operating a 1000 lb. mixer came in contact with the moving parts of the blade and amputated three fingers on the right hand.,1
"An employee was working outdoors at the ""Rover Buying Station."" He and a truck driver loaded purchased seed into a truck. The two employees then went into the air conditioned office to cool off. The employee sat down near the air conditioner and became unresponsive. The truck driver called 911. The employee was transported to the hospital.",1
"An employee working on the pharmacy department pick line tripped on a box and fell, breaking her hip and femur. She was taken to the hospital and admitted for surgery.",1
An employee was found unconscious on the floor of the manufacturing area. It is believed the employee may have fallen against a mold/form used to make burial mounds. The employee was hospitalized for treatment of lacerations to his forehead and possible cracked vertebrae in his neck.,1
"A machine drops dough into a hopper and then onto a conveyor. The machine operator knelt down on the ground and his hand went under the conveyor. His hand activated a sensor that signals the dough cutter to come down and cut/section the dough. The dough cutter, which is not a blade but a chunter, pinched the thumb on his left hand.",1
An employee tripped over a pallet and fell fracturing the left knee.,1
"An employee was delivering auto parts to a customer location on July 9, 2015 where he was attacked by a dog and bitten on the hand. On July 13, 2015, he was hospitalized to receive vaccinations and to treat the infected wound.",1
"An extrusion operator was removing an airshaft from the steel core on an extrusion plastic processing line with help from another employee. The steel core pinched off the tip of the operator's left middle finger. The injured employee was not hospitalized, but was treated in the emergency room.",0
An employee was monitoring a palletizer machine. The employee climbed up onto the machine to clear a jam at which time the machine completed its cycle. The employee suffered an injury to her right ankle and was admitted to the hospital for treatment and surgery.,1
A crane operator was going to set up for a crane pick for another company. He began taking the outrigger pads off the rack and caught his finger on the pads causing a partial amputation to right index fingertip.,0
An employee suffered a fingertip amputation while trimming paper on an unguarded guillotine paper cutter.,0
"An employee was running a rolling press machine and his hand got caught in the in-running nip point.  When he removed his hand, a finger on his hand was torn requiring hospitalization.",1
An employee was digging a ditch to lay conduit when he began to feel ill. He was taken to the emergency room and was diagnosed with heat illness.,1
"An employee, working as a coner, which is the person who sits on the platform crate/grate behind the road line marking paint truck and picks up and places traffic cones, was picking up cones from the right side of the crate/grate when the truck hit a bump causing it to bounce up and down which caused the employee's right leg to get stuck between the ground and the vehicle breaking the tibia/fibula.",1
A worker was welding the underside of a truck when the flame flashed back through a stress fracture in the fitting causing slag to hit the torch. The torch fell into his lap causing 2nd and 3rd degree burns.,1
An employee caught his right hand and arm in a roller on the line 7 slitter.  The employee suffered injuries to the arm and was taken to the hospital for evaluation.,1
An employee was exiting the warehouse and fell onto her right shoulder.,1
An employee was using a skill saw to cut wood pieces for use in building forms for poured concrete.  The saw kicked back causing a deep laceration on all four fingers on the employee's right hand. The employee was taken to the hospital for treatment.,1
An employee was operating a powered pipe threader while wearing gloves.  The left ring finger was caught in the rotating threader and was amputated just above the first joint.,0
An employee was working with a rotomill machine on the ground checking asphalt depth. The employee used his foot instead of the air wand to remove excess. He caught his foot in the rotomill track injuring the right big toe. A physician amputated bone to close the wound.,0
An employee fractured his left ankle while working with a forklift.,1
An employee was admitted to the hospital after suffering from low sodium symptoms.,1
"An employee was testing a valve with a finger when the valve closed, amputating the left index finger to the first knuckle.",0
An employee was cleaning a screw auger when the employee's hand got caught in the machine amputating two fingers on his right hand.,1
"An employee was operating a fixture that punches a hole through a silicon tube.  She attempted to punch the tube again while holding the tube with her right index finger.  The employee then manually cycled the fixture to perform a punch and the right index finger interfered with the punch, amputating her right index fingertip.",0
An employee was operating a table saw when the tip of his right thumb was severed by the blade.,0
An employee was performing landscaping duties when he passed out.  He was taken to the hospital and admitted for heat exhaustion.,1
"A vertical 42' section of 4"" drilling pipe was being supported by a forklift tine and sash rope for an electric cable installation. The sash broke and the pipe fell to the ground striking a drilling rig worker and causing a skull fracture.",1
"On July 14, 2015, at approximately 12:45pm, a tree trimmer suffered fractured ribs and injuries to his hip and pelvis after being run over by a Jaraff rubber tired industrial truck used for trimming trees and brush along a right of way.  A three person crew was returning to work after a lunch break. The Jaraff operator climbed into the cab of the equipment and began trimming branches. He raised the blade and drove over a pile of brush. When he exited the brush pile, the tree trimmer rose from the pile of brush and called out to the operator that he had been ran over.  The employee was hospitalized.",1
An employee was walking and fell to the ground fracturing her knee cap.,1
An employee was cleaning the floor around a machine when an unsecured piece of plexiglass (36 in by 36 in) fell about 36 inches from a ledge and landed on the employee's right thumb. The finger was amputated and required 28 stitches to repair.,0
One employee was admitted to the hospital for possible heat stress.,1
An employee's toes on the right foot were amputated after being crushed by a 36 foot long pillar.,0
An employee who was running cable and preparing lights for a film set was hospitalized due to heat stress and dehydration.,1
"An employee was cutting a 2x4 on a table saw using a push stick. After the 2x4 was cut, the employee attempted to retrieve, by hand, a small piece of scrap wood that cleared the guard.  As the employee attempted to push the piece of wood through with his left thumb, the wood caught the blade and pulled his left ring finger into the blade amputating the tip.",0
An employee was separating steel bundles with an overhead crane when the rigging of one bundle shifted crushing the employee's right index finger. The employee was taken to the hospital and admitted for treatment.,1
On 7-14-15 a worker was injured when he ran over a foot with a reach truck. ,1
An employee was holding a wall on a new house with five other employees. The bottom top plate broke adding weight to the wall. Everyone let go of the wall except the injured employee. The wall fell on him causing a fracture to his sacrum.,1
"An employee was demolishing a basement floor with a sledgehammer when a section of flooring gave way and the employee fell 10 feet to the subfloor below.  The employee was hospitalized with head, neck, abdominal and back injuries.",1
An employee amputated the third digit on the right hand while operating a shear.,1
An employee was adjusting blades on a grinding machine while the machine was still in motion.  The employee got two fingers crushed and one amputated by the grinding wheel.,0
An employee suffered burns from a flash fire that was created by a trash pump unit powered by a gas generator. It is used to pump oil and water from an open top tank at the well site.,1
"An employee was attempting to clear a product jam from a piece of processing equipment. When the product became free, the employee's hand struck a gear in the equipment resulting in a fracture to the index and little finger. The employee was hospitalized due to a surgical procedure that required the partial amputation of the little fingertip.",0
An employee was sent to the hospital after experiencing heat stress symptoms.,1
"An employee was inspecting the roof.  As he was coming down the ladder, he lost his grip or his footing and fell 11 feet to the landing below and then continued to fall down the stairs for another four or five feet. The employee was hospitalized.",1
An employee lacerated his right knee when he came into contact with a sander that was not turned off.,1
An employee was cutting a board with a circular saw and amputated the tip of his left thumb.,0
"The employee was working in the assembly line on the day of the incident. The employee notified his immediate supervisor that his hands were cramping. The employee was drinking water throughout the time that he was working, but the cramps began to get worse and he notified his supervisor. The employee was admitted to the hospital for dehydration and renal failure.",1
"On July 15, 2015, an employee was shocked while working on a press in the forge department and was hospitalized due to the injuries sustained. ",1
An employee suffered a partial amputation at the planer mill.,0
An employee moving tables injured his back and was hospitalized.,1
An employee was trying to access a tool box located on company pick-up truck by climbing the back bumper. His foot slipped and he fell to the ground injuring his hip.,1
A worker cleaning vents above the grill area suffered a grease burn on his left foot.,1
"On or about July 15, 2015, an employee suffered an amputation of the left pinky tip when it was caught in a conveyor belt.",0
An employee working in the yard moving trailers with a spotting truck suffered heat stress and was hospitalized.   ,1
An employee delivering packages began vomiting excessively and contacted his supervisor.  His supervisor arrived and he was sitting on the ground (in the shade) with customers placing ice packs on him and still vomiting excessively.  He was admitted to the hospital with renal failure.,1
"An employee was working on a skid steer. He had the loader raised. No loader locks, steel bars, or chains were being used to secure the loader in the raised position. The loader came down, pinning him between the boom and the skid steer. He fell to the ground. He was hospitalized for treatment of two cracked vertebrae and broken ribs.",1
An employee delivering packages complained of cramping to his supervisor and was taken to the hospital where the employee received fluids and was admitted.,1
An employee was cutting pieces of plate using a band saw. The employee's glove got caught by the saw causing the amputation of a portion of his left thumb. The employee was taken to the hospital for treatment.,0
An employee was in the process of positioning/flattening a blue polymer strip in a Schneider Senator machine which cuts the strip to the required dimensions.  Both of the employee's hands were in the machine at the time. The employee activated the foot pedal which caused the positioning clamp to come down on the employee's left middle finger resulting in a crushing injury and later amputation of the fingertip.,0
Employee received burn injuries while setting up the palletizer in the pallet mill.,1
"The employee was connecting a rod for rock coring/sampling.  The rod is approximately 2"" in diameter by 5' long, weighing about 15 pounds.  The head of the auger rig turns the rod.  The employee was using a 24"" wrench to tighten the rod.  The employee activated the rig to help torque the rod.  The employee was injured when he put his hand between the pipe wrench and the turning auger rig.",1
An employee operating a tube mill machine received an impalement injury to his left foot by the scratch brush rod. The employee was hospitalized for treatment.,1
"On July 15, 2015 an employee of a temporary staffing agency was operating an electric pallet jack. The employee ran over his foot, resulting in a compound fracture.",1
An employee was hospitalized for complications due to a muscle injury after working on the battery.,1
An employee was admitted to the hospital after a punch wound to the left palm became infected.,1
An employee was cleaning the lollipop machine. Her right hand was caught by the drive pulley which subsequently pulled her arm into the machine up to her shoulder. She was admitted to the hospital for surgery to repair her broken right arm.,1
The employee was using a hand drill at the shop drilling holes on a 2 inch piece of pipe. The electric drill bound up or jerked while he was holding it. The employee fractured his right hand.,1
"An employee walking through the front doors tripped and fell, fracturing an arm in multiple locations.",1
An employee working from a pallet mounted on a forklift suffered a fingertip amputation when his finger was caught in the descending forklift mast.,0
An employee suffered right hand finger amputations while performing maintenance on a running forklift truck.,1
An employee slipped off the third step of a rollaway dumpster while trying to remove plywood from it and fell.,1
An employee was placing a piece of pipe on a baler table when the pipe began to roll off the table. The employee tried to catch the rolling pipe and caught his finger between the baler table and the pipe.,1
An employee became dehydrated while working at a construction site. The employee began to cramp and was taken to the hospital where he was administered IV fluids and kept overnight.,1
A nail from a pneumatic nail gun struck an employee's eye.  The employee was hospitalized and had surgery.  The incident occurred on 7/15/2015 at approximately 10:30 am.,1
Two maintenance employees were checking a belt on a CVP (Cold Vacuum Pack) machine and removed a guard to observe the belt slipping. An employee's finger was caught when the machine started automatically resulting in a soft tissue amputation of the third finger on his right hand.,0
An employee amputated the tip of his thumb while slicing cheese on an electric slicer.,0
The employee was sharpening a tool on a large bench grinder and his right thumb got caught in the grinder causing a partial amputation.,1
An employee was operating the extrusion machine. When he slid a piece of equipment inside the machine (Nissan Step Rail) his finger was in a pinch point and he received an acute wound to the left middle fingertip.,1
"While setting a steel plate onto the roadway, the chain came off the hoe and the steel plate fell onto the employee's right arm fracturing it.",1
"Employees were removing the flat plate assembly equipment in preparation for vacuum testing in manholes. During the removal process, one of the employees rolled his ankle and fell into the manhole breaking his ankle.",1
An employee was working with formwork that has pins and telescope. The finger was in one of the scaffold pin holes and when the scaffold collapsed it took off the tip of his right middle finger. No bone was lost.,0
An employee was exposed to work place violence.,1
An employee was bitten by a spider and was hospitalized.,1
An employee was lowering an automobile garage door when the wind caught the door and pulled it loose. The garage door struck the employee on the head and shoulder. The employee was hospitalized for injuries.,1
The employee was mail sorting when she tripped over an ergo mat breaking her left leg.  The employee was hospitalized.  ,1
An employee slipped and fell injuring her hip that required hospitalization.,1
An employee suffered a fingertip amputation when clearing a jam on the cocoa system.,1
An employee cut his right pinky fingertip while using a vegetable slicer.,0
An employee was looking for debris on the rollers of the flexographic printer. She pulled the web back and her left-hand thumb got caught by the impressing roll and print cylinder. Her thumb was degloved and required surgery.,1
An employee was working near the wash line conveyor in the production area. She reached to remove a bucket from the conveyor when her right-hand pinky and ring fingertips were amputated by a chain and sprocket.,0
"An employee stood on the edge of the top of a fryer to clean the hood. The fryer had a lid over the grease. The lid slipped off, and the employee's right foot and ankle went into the grease, receiving second degree burns.",1
An employee fell from a ladder while inspecting the roof.,1
An employee was installing insulation from a step ladder at an approximate height of 5 feet.  The employee twisted to the side and the ladder became unstable. The employee fell to the ground and fractured the upper right arm.,1
"An employee's left ring finger got caught on an air pump as he was hurrying to return to the store.  He fell, dislocating his right thumb and degloving his left ring finger. He was hospitalized and his finger was amputated.",1
"On July 17, 2015, at approximately 1:45pm, an employee was hospitalized after suffering two broken bones to his lower left leg. Before the incident, the employee was standing on the third rung of a 12-foot stepladder, tightening bolts on a flange with a torque wrench.  While applying pressure to the wrench, a reducer on the wrench broke, causing the employee to lose his balance. As he stepped down 34"" to the gravel surface, he landed awkwardly on his left foot, causing fractures.",1
An employee's right index finger was amputated while operating a trim press machine.,0
"An employee fell through the roof, breaking his leg.",1
"On July 16, 2015, an employee was using a crank handle to manually turn the shaft of a cement mixer. When the machine started, the crank handle flew out and hit the left side of the employee's face. He was hospitalized for a complex left ear and left upper neck wound.",1
"An employee was cleaning out a powder hopper while standing on a platform ladder. He slipped, and his right hand went into the hopper to the bottom auger, which was about 12 inches from the top of the hopper. He sustained a right index fingertip amputation.",0
An employee's fingertip was damaged while using a grinder.,0
"An employee was performing demolition work on the old baggage handling system at Terminal B.  The employee was cutting the last 2 U bolts. The pipe-hanger got caught and was hanging on the conveyor when it started to pull forward. It got free and sprung backwards, smashing the employee's hand.",1
"An employee was operating a pole grab machine to load electrical poles onto a trailer.  The pole became dislodged, fell, and hit the employee in the face, resulting in hospitalization.",1
"An employee was standing on a chair to put a box on a shelf when the shelving unit fell toward her. She injured the left side of her back, shoulder, and neck.",1
"An employee was helping a welder install process pipe at the Koch Ag & Energy facility near Enid, Oklahoma. After offloading pipe that had been delivered to the site, he began to experience heat-related symptoms and cramping. He was hospitalized overnight for testing and hydration for heat-related illness.",1
"An employee was replacing a belt on a compressor. The belt caught the employee's finger, causing a deep laceration. The employee was hospitalized for treatment.",1
"An employee was driving a powered pallet jack out of the cold storage room. As he was pulling out, a second motorized pallet jack approached from his left and struck his equipment. He attempted to stop the other equipment using his foot. His left big toe was pinched between the mast areas of the two pallet jacks and had to be amputated at the hospital.",0
An employee's right middle fingertip was amputated while pushing meat into an auger.,0
"An employee was cutting on a five gallon drum with an acetylene torch. The residue in the drum flashed over and the employee suffered burns to his face, chest, and arms and was hospitalized.",1
An employee was pinned between two trucks and sustained life-threatening injuries requiring hospitalization.,1
A neutral line was down because of a storm. An employee was attempting to repair the line when he made contact with the live single line.,1
An employee on travel status fell over a railing to the floor below while waiting for a flight and suffered multiple fractures.,1
An employee was preparing to perform a complete disconnect of services. He was walking toward the utility pole and noticed a dog. He began running from the dog and fell.  He was hospitalized and had surgery on his left leg.,1
"An employee was pushing a piece of 750-pound equipment up a 30- to 40-degree slope. The equipment rolled back onto him, fracturing his ribs, collarbone, and left femur. He was hospitalized.",1
"An employee was using his hands to move rock from the conveyor belt to a shelf. His finger got caught and smashed between two rocks, resulting in a right index fingertip amputation. A small portion of the bone was surgically removed.",0
"An employee hooked a lanyard to what he thought was a D-ring on his climbing belt, leaned back, and fell to the ground below. He actually hooked up to a tool on his tool belt.",1
An employee was moving a manual gate on a piece of equipment when the gate slipped from the employee's hand and pinched the left pinky finger between the gate bottom and equipment surface. This caused an amputation of the fingertip above the finger nail.,0
"An employee inside the penitentiary was greasing the motor on an air handling fan. His fingers got caught between a pulley and belt, resulting in three-quarter fingertip amputation and small lacerations to his other fingers. The employee was hospitalized.",1
"An employee was up on the platform performing a visual inspection of the CP Roll. There are 3 to 4 rollers that go together to print. He slipped, and his hand entered an in-running nip point between two driven rollers. He sustained a soft-tissue amputation of his right thumb tip.",0
The employee's left hand was crushed and severely lacerated when he was struck by a fan attenuator.,1
"An employee exiting her vehicle slipped on the curb, falling on her right hip.",1
"Two employees were moving a refrigerator from the second floor to the first floor. One employee lost his grip on the refrigerator while going down the stairs. The refrigerator struck the injured employee, breaking three ribs and requiring hospitalization.",1
"An employee was instructing another operator on how to run a task with a new machine set up in place on the autogrinder machine. He used his right hand to point out a piece of glass as material was being fed into the machine on a small conveyor belt. His finger contacted an in-going nip point on rotating gears, and he sustained a right index fingertip amputation.",0
"An employee suffered a leg injury while performing maintenance work activities when a 1,000 pound submersible pump fell onto the employee, requiring hospitalization.",1
An employee's left pinky was amputated while closing the safe.,0
An employee's right arm got caught between a lead conveyor belt and a tail roller in the south crumb line. The employee suffered a compound fracture.,1
An employee was struck by a powered industrial vehicle.,1
"While stepping off of a crane platform onto a ladder, an employee lost his balance and fell 66.5 inches, injuring his left leg. He was hospitalized for surgery.",1
"While cleaning the kitchen area, an employee slipped on grease on the floor, fracturing his hip and requiring surgery and hospitalization.",1
"An employee reached under a machine to retrieve envelopes. The employee's hand was pulled into the machine, resulting in a right index fingertip amputation.",0
An employee driving an ATV flipped and broke a leg.,1
"An employee was using a circular saw to cut the walls of a trailer, which were being removed to be disposed of as scrap. The saw kicked back and lacerated his left calf area. He was hospitalized.",1
"On 7/17/15, an employee's thumb was amputated when caught between a large steel ring and a railing during loading of the steel ring onto a trailer.",0
"An employee was helping a coworker upright a 55-gallon drum full of liquid with the forks of a powered industrial truck. The drum fell, and the employee's hand got caught underneath it. He was hospitalized and had his left middle fingertip amputated.",0
"While an employee was moving an empty engine hoist, the lifting arm of the hoist came down and severed the employee's right-hand middle fingertip.",0
"On July 17, 2015, an employee was struck by a piece of a press machine while holding down a flat truss. The piece pinned and broke his leg.",1
An employee was working on a valve that was suspended in the air with a threaded eye bolt. The eye bolt became unthreaded and the valve fell on the employee's right ring finger. The employee was hospitalized overnight.,1
"An employee was unloading water heaters from a forklift. The heater box bottom was faulty and came loose, causing a shift in weight that resulted in the employee falling two stories. The employee's feet and ankles broke.",1
"An employee was picking up some battery cells from the floor of the shop using a forklift. The battery cells were being secured by the employee, but the batteries slid off and his hand got caught between the battery and the floor. He was wearing gloves. The fleshy part of the finger was severed from the hand.",0
An employee cleaning equipment bumped against a heated roll and suffered burns to the forearm and stomach areas.,1
An employee experienced heat stress systems while providing waste service to household customers.,1
"An employee was bitten on the wrist by a cat on Friday, 7-17-15, at 5:15 p.m. The wound later became infected and required hospitalization.",1
An employee sustained a back injury while lifting a 20- to 30-pound box from a cart and was hospitalized.,1
An employee was installing a Bliss Press by securing four tie bolts using a hydraulic torqueing method. One of the bolts blew apart and struck the employee in the left leg. The employee sustained a fracture to his left tibia.,1
"On 7/17/15, an employee slipped on the bottom two steps while descending a ladder (billy jack stand). He used his right hand to catch his fall. He later experienced swelling on his right wrist and required surgery for a fractured wrist.",1
"While wiring a ground bar in a 1940s electrical system (3 phase sub panel 277 volts AC), an employee contacted live parts. He suffered burns to his hands and arms after an arc blast, requiring hospitalization.",1
"An employee went up a ladder to change a lightbulb, descended the ladder, walked a few steps, and then turned or twisted and heard a pop in the left knee.",1
An employee was using a handheld portable power drill to hang a job site sign when the drill bit hit his finger.,1
"An employee experienced heat-related symptoms, including dizziness and low blood pressure.  He was hospitalized for dehydration, acute renal failure, rhabdomyolysis, and hypotension.",1
"An employee lost control of his truck while trying to avoid a deer, ran off the highway, and struck a tree.",1
Employee was hospitalized for chemical burns after cleaning chemicals got on his clothing.,1
"An employee was holding an extension ladder while a coworker was on it. The ladder slipped and the employee's wrist jammed, resulting in a broken wrist. The employee was hospitalized overnight and received surgery.",1
"An employee was repairing an A/C unit. While performing maintenance, the unit started and cut the employee's right hand. He had surgery and was hospitalized overnight.",1
An employee fell off of a truck trailer and broke his leg. He was hospitalized overnight.,1
An employee slipped and fell.,1
"After talking with a customer, an employee turned around and fell down on the floor, breaking her right tibia. She was hospitalized overnight for surgery.",1
"An employee was standing on a step ladder to retrieve baking trays approximately 7 feet from ground level. While stepping down, she slipped off the ladder and broke her leg, requiring hospitalization.",1
An employee suffered heat exhaustion while working at the tire store on 7/18/15 and was hospitalized overnight.,1
An employee was struck by a mule pallet jack while attempting to get past it. His ankle got caught between the mule and a bollard. He fractured his ankle.,1
An employee was hospitalized for hydrogen sulfide exposure while pulling tank bottoms at an oil and gas waste disposal site.,1
An employee's thumb tip was amputated after getting stuck between rollers while threading the line.,0
An employee's foot got caught on a pallet in the lumber department; he fell and injured his left hip.,1
An employee was cleaning out the grinder for a spray dryer when a finger got caught in a pinch point between the fan blade and the opening to the fan blade housing. The employee sustained a left ring finger amputation.,0
"On or about July 18, 2015, at approximately 8:10 a.m., an employee was dismounting an electric pallet jack in the warehouse.  After bringing the pallet jack to a full stop, she swung her leg out and struck an upright for a steel shelving unit, breaking a bone behind her knee. She was hospitalized.",1
"An employee's finger got caught in a drill press, causing a partial amputation.",1
An employee was hospitalized after a 55-gallon drum ignited and fractured his leg while torch cutting.,1
"On Saturday, July 18, 2015, around 9:00 a.m., an employee fell through the handrail system of an 8-feet-high platform to the ground while coming out of a grain bin during construction. He was hospitalized with a lacerated spleen.",1
An employee was struck by a forklift.,1
"Employees were placing a 50-foot wood pole into the ground to support electrical lines. The line truck could not fit between the alleyway where the pole was to be placed. The injured employee was tasked with securing a bonding wire to the pole. He straddled the pole to about 12 feet to begin securing the grounding wire. As he stapled the wire, he lost his balance and fell onto the hard pavement/dirt surface. He was hospitalized and required surgery to repair his lower back.",1
A maintenance employee servicing a wheel abrading machine was hospitalized after breaking two of his right-hand fingers.,1
An employee's left-hand middle fingertip was amputated after getting caught between a large bearing housing and a tool rest.,0
"An employee fell on a walking working surface, suffering fractures to the left wrist and knee.",1
An employee in the thermal forming department was troubleshooting a trim press when the employee sustained a left hand amputation. The equipment was not locked out and the guards were bypassed at the time of the incident.,1
An employee was hospitalized for severe dehydration.,1
"While connecting an electrical volt meter to a 480V panel, an employee suffered first and second degree burns to the left hand. The employee was not wearing gloves at the time. The employee was hospitalized overnight for observation.",1
An employee was performing maintenance on a press. The employee was watching the motor and the belt of the press. He reached his left hand in to touch the belt and the belt engaged. His left middle finger was amputated by the belt and pulley.,1
An employee received third degree burns to the left hand due to steam from a vegetable cooker.,1
"On July 19, at approximately 7:50 p.m., an employee was injured after stepping onto loose grating, which dislodged and allowed his leg to slip into an 18-inch deep trench. The employee received stitches and was later hospitalized for an infection.",1
"An employee was heating up sealer on a seal coating sprayer. The employee lifted up the lid of the sealer container and a flame shot out, burning the employee's left hand and forearm.",1
"On July 19, 2015, an employee was changing a bladder on an E5 tire press. While changing it, the rubber began to tear. He tried to grab the bottom ring on the bladder, and his right middle finger was partially amputated between the ring and the press.",0
"An employee sustained severe injuries while operating a forklift with a clamp attachment. The forklift flipped, and the employee sustained a head concussion and a broken right hand, requiring hospitalization.",1
An employee was walking near a forklift holding a non-secure joint casing. The employee sustained a compound fracture to the leg when the joint casing rolled off the forklift tines and landed on the employee's leg.,1
"While cleaning the rolls of a mill machine with a rag, an employee's hand got pulled into the rolls, amputating a finger.",1
An employee fell and fractured his shoulder. He was hospitalized.,1
"An employee was operating a hydro blaster while cleaning a heat exchanger. As he exited a scaffold that was 15 to 20 feet in height, he slipped and fell through the ladder cage onto the concrete surface, injuring his lower back. He was hospitalized for surgery on his lower back.",1
An employee was cutting a steel pipe with a power grinder. The grinder kicked out and seriously cut the employee's leg.,1
"While operating a table saw, an employee's glove got caught. The employee's hand was pulled into the blade, amputating 2/3 of the third left-hand finger.",0
"An employee slipped on a wet spot in the showroom, fell, and fractured her hip. She was hospitalized and underwent surgery.",1
"On July 20, 2015, an employee was climbing a fiberglass ladder to access a transformer when he was attacked by hornets.  While trying to quickly get off the ladder, he fell and broke his right arm and damaged his spleen.",1
"An employee in the shop's face-frames department was operating a machine press that punches holes into cabinetry. As the clamping mechanism came down, it amputated her left-hand pinky finger. The employee required surgery.",0
An employee was holding a piece of lumber to cut it with a power saw when the saw kicked back and amputated the right pinky fingertip at the first knuckle.,0
"An employee on a one-story roof was descending a ladder and fell 9 feet onto the asphalt ground, requiring hospitalization for severe bodily injuries.",1
An employee experienced an electrical shock and then fell from a platform.,1
"Powdered product was being dispensed into a bag when the powder stopped coming out of the fill spout.  An employee reached up into the fill tube with his left hand/arm until his fingers reached the sliding gate valve, which opens/closes to start and stop the product flow. He pressed a button on a nearby solenoid valve with his right hand, opening the sliding gate valve in the fill tube. He then reached farther up in the fill tube and into the sliding gate valve. He released the button on the solenoid  valve, which caused the sliding gate valve inside the fill tube to close and amputate his left-hand middle fingertip.",0
"On or about July 20, 2015, an employee tried to park his small landscape trailer in the Trew Stone parking lot at 901 River Road, Deerfield, MA. As he tried to unhitch it, the trailer started to move backwards. While he was trying to stop the trailer from hitting a pickup truck parked there, he got between the pickup truck and the trailer and his left thigh got pinched. He was hospitalized and received stitches.",1
"An employee was working on a closed I-64 exit ramp at IL Route 177. A vehicle being driven by a site employee struck a nearby roller, which then struck the employee, breaking both legs.",1
"An employee was performing milling work, taking up asphalt. The employee was struck by a semi-truck making a right turn.",1
"An employee in a truck had his left foot on the ground and his right foot on the clutch. The vehicle was not in neutral at the time. When he let off the clutch, he was run over by the truck, breaking his pelvis.",1
"An employee was walking out of an office into the lobby when she slipped on a wet floor. She fell, breaking her left hip.",1
An employee conducting HVAC maintenance in the base unit of a cell tower was hospitalized with severe dehydration.,1
"A maintenance employee using a metal punch struck his left hand with a hammer, experienced swelling and inflammation, and developed an infection that required hospitalization.",1
An employee was hospitalized due to a fall while climbing up pallets in a truck. He suffered a broken leg when the pallets fell on him.,1
"An employee was helping a coworker replace struts. They were lining up pins when the supportive strap broke. The truck cab fell and crushed the employee's left hand, resulting in hospitalization.",1
"An employee slipped off an 8-foot platform, fracturing his collarbone and bruising his ribs. He was hospitalized.",1
"An employee was performing troubleshooting activities, trying to free a traverse chain. The employee attempted to turn the traverse motor, which drives the chain/conveyor, on and off. The traverse motor jumped 2 feet and impacted the employee's hand.",0
"An employee was walking into work on the main entrance sidewalk on 7/20/15 at approximately 7:50 AM. The employee tripped/fell, fracturing their thoracic spine.",1
"An employee was operating a mini excavator, removing a floor slab in the west annex of the green mile. The floor slab gave way, and the excavator fell one floor. The employee sustained a concussion and a severe laceration to the right forearm.",1
An employee performing wheel dressing operations on the TGI Centerless Grinder was injured when he reached into the grinding wheel to extract the dummy plug. He sustained a right index finger amputation.,0
"On July 20, 2015, an employee was handling a customer service wire drop when he heard a clap of thunder and then felt a jolt in his left arm and hand. He was hospitalized with heart problems.",1
"Employees were transporting a transformer with a forklift. The injured employee was struck on the foot and ankle by the front tire of the forklift. The employee's left leg was crushed below the mid-ankle, resulting in a left foot amputation.",1
An employee was pinned between a roll-off and a large construction dumpster.,1
An employee was offloading product when he fell and hit his head. He was hospitalized for treatment and testing.,1
"On or about July 21, 2015, an employee suffered a left thumb amputation when her hand was pulled into a rotating part while unjamming an Elsner machine.",0
An employee was walking with a knife when he fell and injured his leg with the knife.,1
"On July 20, 2015, an employee suffered a left finger amputation while clearing a wood jam in a saw.",0
"On July 20, 2015, an employee tripped when the right foot got caught on a printer. The employee fell and fractured the right ankle, requiring surgery.",1
"An employee delivering packages became dehydrated, got lightheaded, and began vomiting. The employee was hospitalized overnight for heat exhaustion.",1
An employee was positioning lumber in direct sunlight and temporarily lost consciousness. He was hospitalized for treatment.,1
An employee operating the RPE to pull and prepare product for shipment was hospitalized for dizziness due to possible dehydration.,1
"On July 20, 2015, an employee was loading steel beams onto a truck when the beams fell. The employee tried to prevent the beams from falling with his arm, which got caught between two beans. His arm broke.",1
An employee fell approximately 35 feet in a ship cargo hold tank. The employee was hospitalized.,1
"Two employees were working on a bakers scaffold when it collapsed.  One employee fell down and was struck by the scaffold, which caused a puncture that required hospitalization and surgery.",1
An employee fell and broke her ankle when she was descending a flight of stairs.,1
An employee who suffered heat exhaustion was given IV fluids and hospitalized overnight for observation.,1
An employee amputated two fingertips while clearing out a product jam on a dust collecting system.,1
An employee was tightening a clamp down onto a pipe when his finger got caught between the clamp and the pipe.,0
"An employee was walking down the hall towards the bathroom when she slipped and fell, fracturing her right knee.",1
An employee throwing a desk into the dumpster fell and was injured.,1
An employee passed out while walking from dehydration. The employee was hospitalized for IV fluid treatment.,1
"An employee suffered a car collision injury while delivering mail at or near 40294 299th Street in Wagner, South Dakota.",1
"An employee attempted to remove a jammed bag from a machine. The machine activated, clamping the employee's finger. A knife came down and cut the tip of the finger.",0
An employee slipped and fell while walking into the lobby and was injured.,1
An employee spraying weed killer slipped and fell. The employee experienced back pain and was hospitalized overnight.,1
"On July 21, 2015, at approximately 8:30 p.m., an employee was sweeping up sawdust and carrying a paint can at the ECG Crankshaft mill in Sharon, Pennsylvania. Conductors were sticking out of the metal conduit beneath a saw table at the time. The employee reached down to pick up the paint can, which then contacted the live conduit.  The can exploded, burning the employee's right forearm. The employee was hospitalized overnight.",1
"An employee was tightening the chuck on a lathe using a T-handle when a second employee turned on the lathe, causing the T-handle to spin. The injured employee's right ring finger got caught between the machine and the T-handle, resulting in a soft tissue amputation.",0
An employee fell when he/she drove the forklift off a loading dock ramp. The loading dock had a broken door and broken ramp that were not guarded or blocked at the time of the incident.,1
"An employee was dumping bags of dry phosphoric acid into a mixer from an elevated platform that was 8-feet, 9-inches high off the ground. A forklift had a pallet of the dry phosphoric acid.  The portion calls for 40 bags to be dumped. The pallet was airborne, not sitting on the platform.  The employee finished dumping the bags, turned to look for something, and fell between the pallet and the platform. The opening between the pallet and platform was 35 inches. The employee was unconscious and required hospitalization.",1
"On or about July 21, 2015, an employee's left pinky got caught and amputated in a pinch point between the frame of an ergonomic lifting device and an adjacent limit adjustment bar.",0
"On July 21, 2015, an employee dismantling a scaffold in an elevator shaft fell approximately 2 stories and sustained spinal injuries requiring hospitalization.",1
"An employee fell 12 feet from a platform, requiring hospitalization.",1
An employee using a deli slicer was approached by a customer. Her right index finger was amputated by the deli slicer blade.,1
"An employee was struck by a lower roller from a feeding machine. The employee was feeding cloth and rubber from the back of the machine. Tension built up and caused the roll to swing out from the machine. The employee sustained multiple injuries, which led to hospitalization: internal injuries, possible right arm fracture, three broken right-side ribs, and 6-inch laceration to right abdomen.",1
"A flash fire at the acetylene filling plant burned an employee's arm and shoulder, resulting in hospitalization.",1
An employee experienced head pain. The employee was hospitalized overnight for dehydration and partial kidney function.,1
"An employee sawing a piece of wood hit a knot while making a making a notch cut, causing the saw to grab the piece of lumber, which then pulled his left hand into the saw blade and amputated his fingertip.",0
"On July 10, 2015, an employee scratched his left ring finger while placing the door back on an HVAC unit he was servicing. The finger became infected and required hospitalization.",1
An employee got his left arm caught in the automatic router.,1
An employee got his finger caught between a base plate and the ground while setting the footings of an outrigger.,1
An employee was closing the cover on the equipment he was setting up when his pinky finger got caught between the cover and equipment. His pinky finger was partially amputated between the nail and knuckle.,0
"An employee completed painting activities and started getting cramps. The employee rode the bike to the water station to take a break. The cramping worsened, and the employee was hospitalized.",1
"An employee was attempting to clear a blockage in a corn flaker. The equipment was shut down and locked out at the time. The employee removed a corn cob from the rollers when residual pressure from the rollers smashed the employee's fingertips, resulting in an amputation of the middle left-hand finger.",1
"An employee got up on a conveyor he was placing. The conveyor came over him, breaking both of his arms.",1
An employee stepped through a cardboard box display and tripped and fell to the ground. The employee injured the right hip and was hospitalized with a possible hip fracture.,1
"An employee was getting supplies from the supply closet when she tripped over the cord of a portable fan. She fell and injured her hip, requiring hospitalization.",1
"An employee got out of his truck to unhook the trailer. His shoelace got caught on a piece of metal and he fell on the ground, injuring his forehead and breaking his arm.",1
An employee's finger got caught between a chain and the utility pole.,0
"On or about 21 July 2015, at approximately 1000 hrs, an employee for Convent Health Services was injured while performing maintenance work near the Convent Children's Hospital in Lubbock, Texas. He was on the third rung of a ladder when he fell off, causing a laceration and severe ligament damage to his legs. He was hospitalized for treatment.",1
An employee's leg was run over by a forklift.,1
"An employee was ascending a portable ladder and fell approximately 10 feet, breaking a hip.",1
"An employee was using a crescent wrench and a one-half inch die nut to remove a sharp burr and metal shards from a stud. The employee's hand slipped off the wrench, slid down, and struck the stud, lacerating the left palm. The employee required surgery.",1
A crane was lifting a debris hopper. The wire-rope sling attached to the debris hopper failed during the lift. The debris hopper fell and struck an employee on the ground.,1
A crane was moving a load of steel. An employee's left hand was crushed when the magnet holding the load inadvertently turned off and released the load.,1
An employee was dumping trash in the dumpster when he experienced a headache coupled with nausea and cramping. He was taken to the hospital where he received fluids and was kept overnight for observation.,1
An employee was using an overhead hoist to move a cement bucket.  His finger was between the bucket handle and overhead hoist hook when the hoist was activated. His right index finger was amputated at the first joint.,0
"On or about July 21, 2015, an employee was working out of a bucket truck. At 5:45 p.m., he lost consciousness. He was hospitalized overnight for heat stress.",1
"While loading a 1,000-pound propane tank onto a trailer, the load shifted and crushed an employee's finger. His injury later required amputation.",0
An employee was injured and hospitalized when a forklift hit and ran over him.,1
"An employee was working on a pipe-threading machine, placing caps on the end of a pipe. The employee's finger caught the sharp edge of the pipe and was severely lacerated. The employee was hospitalized.",1
An employee received burns to her hand from a collar and cuff press and was hospitalized.,1
"On or about 19 July 2015, at approximately 1600 hours, an employee of Precision Drilling was lowering a roof over the mud tanks area during rigging down procedures. The roof fell on top of him, fracturing his ribs. He was hospitalized.",1
"An employee's right hand got caught between a conveyor belt and roller, breaking three fingers.",1
"On 07/14/14, around 11:30 p.m., an employee working on an overnight project fell 8 to 10 feet from a fixture while removing overhead racking that was being dismantled.",1
An employee suffered an amputation while connecting an air puller to the D ring of a hydraulic tong on a servicing rig.,0
"An employee was seriously injured after a wood guardrail failed, allowing the employee to fall an estimated 10 to 12 feet.",1
An employee was bitten by a spider while cleaning a piece of equipment.,1
"An employee was working on an air-conditioning rooftop unit. He opened the door to reset the unit when the door slammed shut on his finger, amputating the right index fingertip. The compressor was not turned off at the time of the incident.",0
An employee was in the meat department emptying water into a sink from a tub that is used to soak meat trays when he slipped and fell backwards. The store manager found the employee on the floor and helped him up. He was later hospitalized with a cracked rib and punctured lung.,1
An employee was bitten by an insect during her break and experienced swelling. The bite was lanced at the emergency room. The lanced area later became infected and the employee was hospitalized.,1
"An employee used a forklift to dump the contents from a small dumpster into a larger dumpster when the cardboard got stuck in the small dumpster. When he pulled the cardboard, the lid on the small dumpster closed and pinched his finger, crushing and lacerating his left index fingertip.  The skin flap from the laceration was later removed during surgery to repair his finger.",0
"An employee's finger got pinched while unloading a coupler from the spinning hanger tripod, resulting in hospitalization.",1
"Two employees lifted a 400-pound deck plate. While landing the deck plate onto a pallet, one of the attachments protruding from the deck plate landed on the injured employee's right foot, fracturing the metatarsal.",1
"On July 22, 2015, an employee was working inside a trench box, attempting to place dunnage under one side of the trench box to protect utility lines. The excavator bucket was used to lift one end of the trench box so dunnage could be placed underneath that section. The bucket unexpectedly released from the boom of the excavator as it raised a portion of the trench box. The bucket fell into the trench box, striking and crushing the employee who was hospitalized and had several surgeries.",1
"In the research and development lab, an employee was testing a vacuum motor prototype. After installing the motor, he turned the power on to test it. The unsecured motor jumped out of its housing. When the employee grabbed the motor, his right index finger was amputated by the blades.",0
"An employee was making adjustments to the ""feed dog"" on the multi-spindle screw machine located on the east side of the production building. The machine was energized at the time. The ""feed dog"" engaged, amputating the employee's left thumb.",1
An employee was repairing a tractor tire using a jack. Something happened where the tire came off the rim and the employee was found underneath the tractor.,1
"An employee was cutting castings with a band saw and placing the cut castings in the walking/working area. He fell on the cut castings and dropped a torque tube on his right ankle, fracturing it in three places.",1
"An employee experienced cramps in his lower legs, which would not stop and increased in the level of pain.",1
An employee was hospitalized on 7/27/2015 for a bacterial infection in his calf that developed after contacting contaminated water that was in a pipe he was cutting.,1
"An employee walked approximately 30 feet off a second-floor balcony and landed on his feet on the ground below, injuring his knee.",1
"An employee was preparing to repair a die on an aluminum die-casting machine.  While attempting to remove the die screws, the employee moved an oil line.  The line broke and sprayed hot lubricant oil over the employee's face, chest, and back.",1
An employee's finger was pinched between a part he was fabricating and the press brake.  He lost his right middle fingertip.,0
"Two employees were attempting to change a mold on a roto. The mold was chained up to a crane, and the employees tried to inch a grate underneath the mold to be bolted down. The second employee turned the grate and the first employee's finger got caught in the grate, amputating his index fingertip.",0
An employee was cutting into a sheetrock wall with a circular saw. The saw kicked back and cut the employee's left thumb around the first knuckle.,0
An employee experienced heat-related muscle cramps while loading materials onto a vehicle.,1
An employee suffered a back injury while stocking linens.,1
An employee experienced pain on the job site and was hospitalized.,1
An employee fell off of a step ladder as she was descending it. She fell and broke her right arm. She was hospitalized on 7/22/15 at approximately 9:45 a.m.,1
An employee's right pinky finger got caught between the door and frame of the bathroom stall.,0
"An employee was setting up press rolls. He was between quests and changing the width of the spider arms on the press to install a different roll on the rotating spider arms. He left one roll on top and removed the bolts that keep the spider arms in a fixed position.  The weight of the roll fell down and hit him in the left shoulder as he was jumping out of the way. His foot got caught on the transfer table, and he twisted and fractured his right ankle. He also bumped his chin and received several scrapes on his right leg.",1
An employee sustained a finger amputation when a stringer caught his finger while operating an automatic drill.,0
"On or about July 22, 2015, an employee fell at the entrance of the facility, requiring hospitalization for a fractured hip.",1
An employee was unloading a pallet from a dock when a forklift operator drove over the employee's right foot. He was hospitalized.,1
An employee was hospitalized after accidentally drinking chemical hand sanitizer.,1
"An employee was loading a 35% peracetic acid concentrate canister into a sterilizer. The acid sprayed onto the employee, burning her eyes, neck, upper chest, left arm, left hand, and face.",1
An employee received an electrical shock.,1
"On or about 7/22/2015, at approximately 5:15 p.m., an employee was using a shear saw to cut fiberglass blocks when the employee's finger contacted the saw blade.  The employee had four fingers on one hand amputated and three fingers on the other hand amputated. The employee was hospitalized.",1
An employee was stapling books using the stapling machine and suffered a left ring finger amputation.,1
"An employee attempted to clear stuck parts within a plastic molding machine by retrieving the molded part. The machine cycled and the mold closed, crushing the employee's hand between the two molds. The employee's right index finger was amputated. Lock-out, tag-out procedures were not performed at the time.",1
"At approximately 12:45 p.m., on 23 July 2015, an employee was gathering nitric acid at 67% into an 8oz bottle. The employee filled the bottle and it splashed acid in 
the employee's face, causing chemical burns.",1
An employee was stung by bees and passed out while checking for a bee infestation at a residential apartment.,1
An employee was unloading inventory from the trailer of a commercial truck when he became weak and dizzy. The employee was hospitalized for observation and treated for heat exhaustion.,1
"An employee was being trained. The trainer was closing a heavy duty metal door, which requires a skid loader to close it. The trainer did not see the employee and pinched/pinned the employee's lower legs with the door. The employee was hospitalized.",1
"An employee's finger was pinched between the housing and saw blade while setting up a band saw. The employee's fingertip was cut off, requiring hospitalization.",0
"An employee was resetting milk from a two-step ladder. While stepping off of the ladder, she stepped onto a pallet that was lying flat on the floor behind her, causing her to fall onto her right side. She was hospitalized with a broken hip.",1
An employee's hand became infected after suffering a scratch from metal when moving material.,1
An employee was cutting a piece of steel using an iron-working machine when the employee's hand got caught between the working metal piece and the machine. The employee's right-hand middle and ring fingertips were amputated.,1
An employee was standing on the third rung of a ladder while conducting lifting operations with a crane when a part came loose and hit him on his right shoulder area. He fell about 3 feet to the ground and fractured his pelvis and left wrist.,1
"An employee was running a brake press. The brake broke in half, and the ram fell onto and crushed the employee's right hand. The employee had surgery.",1
"A pipe was on a conveyor roll and stopped (both the pipe and conveyor were stopped). An employee was about to put a plastic bump ring on the stationary pipe when another pipe was fed in and bumped the stationary pipe. The employee's arm got caught between the two pipes, resulting in compound fractures to the left arm and left hand.",1
"An employee was retrieving a tool that fell into a chemical tank using a pole. The tool fell off the pole and back into the tank, splashing the chemical on the employee. The employee sustained first, second, and third degree burns on the hands, right knee, thigh, calf, and right foot, requiring hospitalization.",1
An employee was struck in the head by a piece of plastic piping.,1
"On July 23 2015, around 11:00 a.m., an employee working on a powerlift was adjusting a blade stock from the carriage when the carriage came down and pinched his right leg. He was hospitalized to suture the wound.",1
"An employee attempted to remove a railcar rubber chock that was stuck beneath the wheel.  The employee was going to pull the railcar forward to pull it into the rubber chock. Once it hit the chock, the railcar would roll back, dislodging it.  The metal handle of the chock kicked back and struck him on his chin, fracturing his jaw.",1
An employee's right thumb was crushed.,0
"An employee attempted to clear a jammed pork belly that had become lodged between the skinner and transfer conveyor in the curing department. The employee's left-hand ring, index, and pinky fingers were amputated after getting caught by the skinner's tooth roller and pulled into the machine.",1
"An employee walked into the ground area where the operator was using a two-hand control to run the mixer/blender. The employee's hand reached into the blender, and his thumb tip was severed off.",0
"An employee shut off the rough knot saw. When he began to exit the area, his right arm got caught in the blade, amputating his right arm above the wrist.",0
An employee was operating the pallet mill and crumbling machine when his hand got caught and amputated in the machine.,1
An employee tasked with cleaning out a floor drain on a common floor area was injured when the chemical used to unclog the drain blew back into his face. PPE was not worn at the time.,1
"An employee installing cable at a private residence fell from the top of an extension ladder to the ground, injuring his head, neck, and arm, and fracturing his shoulder.",1
"Employees were trimming a tree. A branch got caught in the crotch of an adjacent tree. They tied one end of the rope to the branch and the other end to a skid steer to pull the branch out.  Due to the orientation of the ground, the rope partially turned around a 6-inch diameter maple tree.  While the skid steer operator advanced the skid steer to tighten the rope, the injured employee stood by the maple tree and applied downward force on the rope to prevent it from ""riding up"" the tree trunk. The employee's right pinky fingertip got caught between the rope and tree as the rope tightened.  About 1/8 to 1/4 inch of the fingertip was amputated.",0
"On July 23, 2015, an employee fell approximately 5 feet from a machine while performing a mold change and was hospitalized.",1
An employee suffered a fractured hip when she fell from a 6-foot stepladder while placing stickers on a sign. ,1
An explosion occurred while an employee was performing work on a well head. He sustained burns to 60% to 80% of his body.,1
An employee stepped off a curb and fell. The employee was hospitalized with potentially cracked ribs.,1
"The employee was setting up stairway forms at the Villages of River Oaks complex when he had some cramping. Later that evening, the employee started to feel additional pain in the stomach and kidney area and went to the hospital emergency room.  The employee had been vomiting and was unable to keep any liquids down. The employee is believed to be suffering acute symptoms of kidney failure due to dehydration. He was hospitalized.",1
An employee was riding on the back of a trailer. He stepped down to get off. The trailer tire was still moving at the time and rolled over his lower leg.,1
"An employee fell 5 feet from a ladder. His leg got caught in the ladder, and he landed on his back and hit his head on scaffolding. He was hospitalized.",1
"An employee's left hand reached into a tape machine to retrieve tape. His right hand was on the machine guard at the time. His right-hand index finger got caught in the rotating chain, and the top portion of the finger was amputated.",0
"On July 23, 2015, an employee suffered a finger amputation while grinding a casting on a stand grinder.",0
An employee fell 4 feet from a scissor lift scaffold and was hospitalized.,1
"An employee tripped over a phone cord in a patient's room. The employee fell and struck her torso, breaking a rib puncturing her spleen.",1
"On or about July 24, 2015, an employee was hospitalized after performing job tasks and duties in the restaurant.",1
"An employee was cleaning the area around the flat iron when his hand entered the iron's gear mechanism to clean it. The mechanism was operating at the time.  He removed the cover and his finger got caught between the gears, amputating his right finger to the first knuckle.",0
An employee sustained a right arm laceration while feeding poultry into slitter equipment.,1
"On 07/24/2015, at 1:15 PM, an employee was struck by the front tire of a forklift truck while stabilizing a compressor that was being transported. The employee stumbled and fell, and the forklift ran up his right leg, crushing it nearly to the knee. The employee's left foot got crushed and he suffered broken bones in his right leg (tibia and fibula).",1
An employee was crawling in a space near the tilt devices to retrieve skimmers that he had placed under the platform in the work area. The tilt device in the molding area came up and crushed the employee between device and the floor.,1
An employee was trimming hedge with a hedge trimmer next to a concrete wall when the trimmer flew back and caught his right hand.,1
"On or about July 24, 2015, an employee sustained serious injuries after being pulled into a conveyor by the hair.",1
"On or about 7/25/15, an employee's left ring fingertip was amputated while trying to clear a jam in a press in the production area.",0
"An employee was testing a newly assembled dough divider. While the employee cleared the machine of dough, the guillotine activated and cut the employee's fingertip partway down the nail.",1
"An employee was walking to retrieve tools and/or material when he tripped over the metal tract on the floor. The metal tract is secured to the floor for drywall installation and its lip protrudes up about 1 inch. His toe/boot got caught on the tract and he fell at ground level on his buttocks, possibly fracturing his left hip. He was hospitalized.",1
"While using a copper fitting device, an employee cut his hand on a piece of copper on 7/24/15.",1
"While unloading auto parts from the back of his tractor trailer at a customer's location, an employee fell approximately 4 feet to the ground.",1
An employee's left-hand middle finger was amputated from the fingernail down.,1
"On 07/24/15, an employee was using a self-retracting safety knife to cut through a zip tie.  The knife got stuck, so the employee attempted to dislodge it. When it came loose, the knife struck the employee's left arm, cutting an artery. The employee was hospitalized and required surgery.",1
"On 7/24/15, at 1:15 p.m., an employee sustained a laceration to his left arm near the elbow while moving a 4x10, 26-gauge sheet of sheet metal (36.4 pounds) from one table to another. He was hospitalized.",1
"An employee was constructing a display for the fair. While using a circular saw, he amputated the tip of his second left-hand finger.",0
An employee was operating a manlift and was struck by a vehicle. He was found on the ground unconscious and was hospitalized.,1
"On July 24, 2015, an employee was adjusting a roll-forming machine when his hand was pulled into the running die. He broke his left thumb and sustained a left index fingertip amputation.",0
"On 7/24/15, an employee activated the trigger of a paint gun that was pointed at his hand.  The pressure of the paint cut his left index finger, which got infected. He was hospitalized.",1
An employee was exposed to moving parts while removing the lockout pin during servicing operations on a wind turbine power generator. The employee suffered a finger amputation.,0
"An employee was on the second level of a scaffold outside of a building, installing an exterior insulation and finishing system, when he fell six stories. The scaffold was unguarded at the time.",1
An employee was moving a stack of small beams from one area to another to clear space using an overhead crane. He set the material down and went to pull the chain from between the beams when the hook caught one of the beams. The stack toppled over and trapped his left leg. He was hospitalized with a fractured left leg.,1
An employee was talking with another employee on the dock. He stepped off the edge of the dock and fell. His hand struck a dumpster and his head struck the ground. He was hospitalized.,1
An employee was lifting tire assemblies onto a wheel balancer. The assemblies weigh approximately 50 to 100 pounds each. The employee felt a pull in his back; the pain worsened over the day and he required hospitalization.,1
"An employee worked with a foreign object inside his boot. After removing the boot at home, the employee found blood and was later sent to the hospital for an infection.",1
An employee suffered 2nd degree burns on his foot when molten material splashed onto his boot. He was hospitalized.,1
"An employee was positioning the lift truck to pick up a tub of parts. He backed into parts tubs behind him and made a rapid forward correction. The quick movement threw him off balance and he fell back. He attempted to steady himself by shifting his left foot, which placed the toe of his foot outside the body of the lift truck. His momentum caused him to pull back on the controls, reversing the lift and causing his left foot to get caught between the lift truck and a tub.  The force crushed the steel toe cap of his safety shoe. He sustained bone and tissue damage to the first four toes of his left foot.",1
"An employee was performing tasks when he reached across a conveyor. The guard got knocked off, and his finger got caught and lacerated in the chain and sprocket.",1
An employee performing service and maintenance on a conveyor system injured his calf muscle on his left leg when it got caught between the conveyor sorter slat and a cross brace. The conveyor was not locked out at the time. The employee's leg required surgery.,1
An employee sustained an amputation while working on a machine.,0
An employee fell and ruptured his spleen while unjamming the cyclone on the roof.,1
An employee was moving a hose when a manual job switch was activated. Her hair got caught and wrapped around the shaft of the post gluer machine when the machine operator went to adjust the machine.,1
"The employee was working on a sewer truck and trying to pull a ladder down. The ladder was stuck and when he forced the ladder to move, his left ring and middle fingers were pinched between the ladder and a utility door. The left ring fingertip was amputated (no bone loss).",0
"An employee was wearing gloves and had a ring on his left ring finger. As he descended the ladder of a JLG scissor lift, his finger got caught in the deck of the lift. His finger was amputated.",1
An employee operating an articulating man lift was overcome by heat.,1
"An employee parked a van. As the employee exited the vehicle, the van rolled forward and the door struck a pole. The employee was pinned between the van door and van and was hospitalized on or about July 25, 2015.",1
"An employee was aligning highway cones in the construction zone when his legs became pinned between a public driver's car and the rear end of the company's pickup truck, resulting in the amputation of his right leg and the possible amputation of his left leg.",0
An employee was installing pins on the electric hospital bed when the headboard fell on and broke his wrist. He was hospitalized overnight.,1
An employee was waiting for welders to complete an isolation on a pipe. The employee started cramping and was hospitalized with a muscle injury.,1
"An employee was walking backwards with a pallet jack that was loaded with two pallets of product on its front forks. He walked into another pallet jack being operated by a coworker. His right ankle/foot struck the operating platform of his pallet jack, breaking bones in his right foot.",1
An employee was hospitalized for dehydration/heat exhaustion.,1
An employee got struck by metal shelves and suffered a soft tissue injury.,1
"An employee's feet got hung up on something, causing the employee to fall onto rocks on the ground. The employee was hospitalized on July 26, 2015.",1
"On Sunday, July 26, 2015, an automobile drove through the front of the store; the impact injured an employee.",1
"An employee was moving a metal drum on a pallet when the employee's finger got pinched under the drum edge, amputating the left pinky fingertip.",0
An employee suffered burns to both hands and the right side of the face while moving a vehicle on the fire line on 7/26/15 at 5 p.m. The employee was hospitalized.,1
An employee was hospitalized with an ankle injury after falling 4 feet from a pipe lifting machine.,1
An employee's thumb tip was amputated while operating a band saw to cut boneless ribeye steaks in the meat department. Hand/finger guards were not in place at the time. The employee was hospitalized and had surgery.,0
"On or about July 27, 2015, an employee sustained a serious leg injury after a steel coil fell on the employee's leg.",1
An employee was sitting at his desk when he felt itching and pain in his left-leg shin area. He had received a poisonous spider bite and was hospitalized with a 105-degree temperature.,1
"On 7-27-15, an employee stooped down, hit a leg, and felt a bump under the knee. The employee experienced pain and swelling in the left knee and was later hospitalized for cellulitis.",1
An employee suffered an amputation while working on a hydraulic cylinder. ,1
An employee working at the foundry building got overheated and was hospitalized.,1
"An employee was tightening a fan motor belt. The belt was energized at the time. His left hand slipped and his fingers came into contact with the spinning fan blades, resulting in multiple lacerations to the left-hand fingers/fingertips. He was hospitalized and received stitches.",1
An employee had a hole in his safety shoes and water from working with the concrete soaked his foot resulting in chemical burns.  He was hospitalized and scheduled for skin grafts.,1
"An employee was injured when his electric pallet jack accidentally made contact with his ankle, resulting in a broken ankle and fibula.",1
An employee working from a telescoping multiladder in a step ladder configuration fell from the ladder. The employee was hospitalized with a fractured right wrist.,1
An employee was working under the hood of a vehicle suspended above him by a hydraulic automobile lift. The vehicle unexpectedly started moving forward while on the lift and struck his shoulder area. He was hospitalized.,1
An employee walking down a hall with new floor tile slipped and fell.,1
"An employee working on an elevated work platform 5 feet above the floor slipped and fell, striking his head. He was knocked unconscious and was hospitalized overnight with concussion symptoms.",1
"An employee was working on a blast furnace, checking rigging that was used to install the large valve linkage. The employee bent down and started having lower back spasms, requiring hospitalization.",1
The employee was sitting in the break room and wasn't feeling well.  The employee was given fluids.  The employee passed out and was taken to the hospital. The employee was working in an un-air conditioned building.,1
"An employee was carrying a piece of 2x2 metal angle on a canopy. When he walked to the ledge of the canopy, the retractable pulled him backwards and caused him to fall with the metal angle. As he was falling, he flipped and landed face down with his arms breaking the fall.",1
"On July 27, 2015, a work crew was rigging up. At approximately 11:45 PM, a guardrail was installed. Before the workers secured it with bolts, the injured employee leaned against it and fell 26 feet to the ground below. He sustained five small fractures to his back and was hospitalized.",1
An employee was ascending a steel fixed ladder.  The employee fell approximately 7 to 9 feet to the ground below. The total elevation change was 9 1/2 feet high.  The employee suffered a head laceration and broken bones and was hospitalized.,1
An employee lost a fingertip while using a running interleave machine.,1
"On or about July 27, 2015, an employee's hand was caught underneath a load of steel being moved from the ground to a truck bed.  The employee's left index finger was amputated.",0
"Employee was performing maintenance by changing out lubricator. While manually putting the sheave back on, the employee caught a finger between the sheave and belt.",0
An employee was unloading a container from the loading dock.  He was pulling the metal plate that fits between the loading dock and the container when his right index finger got stuck between the plate and dock and was partially amputated.,0
"A faulty crate of stone weighing approximately 300 pounds tipped over and hit an employee in the leg, breaking his right shin. The employee required surgery.",1
"An employee climbed a ladder to access equipment on a mezzanine at a customer site. The ladder slipped out from under him, and he fell and fractured his L2 vertebra in two places.",1
An employee's arm got caught in a conveyor while trying to dislodge waste food. The employee sustained a compound fracture of the arm.,1
"An employee was removing a hole cover to align some forms to set up an AC unit. The forms were misaligned and had to be reset.  The employee fell through the hole, approximately 15 to 20 feet. He hit his head experienced swelling. A harness was not worn at the time of the incident.",1
"An employee was running a phase line for an electric customer when the resident's dog chased him. He tried to climb over a 4-foot fence to escape and his left pant leg and foot got caught on a post. He fell over the fence, breaking the tibia and fibula in his left leg.",1
"An employee was loading trash into the back of a truck. He began to feel cramps and was dehydrated. He was placed in an air conditioned van and given fluids, and was hospitalized when his condition worsened.",1
"During a deboning process, an employee's left-hand index fingertip was cut by a knife. The fingertip was medically amputated just below the cuticle line.",0
An employee was hospitalized after he dismounted a moving pallet jack and his foot got caught between the pallet and the jack.,1
"An employee was using a portable chop saw at a customer's house. The guard got hung up as the saw was raised, and the saw blade severely lacerated and broke bones in the employee's left hand.",1
"An employee was rolling a door casing to form the door when his left hand got pinched between metal rollers, injuring his left index finger. He was hospitalized, and his finger was medically amputated.",1
"An employee was using a full revolution mechanical power press to assemble a small component. The employee cycled the press using a foot pedal. The employee's left index finger was in the point of operation at that time, resulting in a fingertip amputation.",0
An employee was shocked and fell backwards while pushing a button on a conveyor system.,1
"While working at a building supply facility, an employee collapsed from heat exhaustion and was hospitalized.",1
"On or about July 27, 2015 at approximately 9:15 p.m., a maintenance employee experienced shooting pain in the left arm, chest, and back, as well as heart palpitations, while installing a pump with two coworkers.  His left hand was seizing up and he couldn't move it. The employee was hospitalized for dehydration and heat stress.",1
"An employee was working at Tyler Mountain Water facility in Poca, West Virginia. The employee's hand was placed inside a blow mold, and his two middle fingers were squeezed together. The machine was in operation at the time of the incident.",1
"An employee engaged in automobile wiring activities under a raised truck body was crushed when the air line supplying air to the air bags, which raise the truck body, released and caused the truck body to come down on the employee.",1
"On or about July 27, 2015, at approximately 5:30 a.m., an employee fell from a mobile ladder stand and suffered head trauma.  The employee was hospitalized with possible arterial bleeding near the brain.",1
"A maintenance employee was inspecting a fan. His finger got caught between a drive belt and pulley.

",0
"On 7/27/15, at 4 PM, an employee was taking out an old power line and adding a new power line on existing poles (working live) using a jumper or mechanical. The employee suffered flash burns on the arm, rib cage, right calf, feet, and body.",1
An employee's legs were burned while putting gasoline on a pile of wood that was on fire. He was hospitalized.,1
An employee was admitted to the hospital for heat-related issues after performing roofing activities.,1
An employee's third and fourth digits were amputated.,1
"An employee had his hand on a spring he was building for a garage door. He pushed the lever to lock the clamp in its place, and his hand got caught under the clamp. He pulled his hand away, amputating his left thumb tip in the process. He was hospitalized and had thumb surgery.",0
 A patient care technician was helping to move an obese patient when the employee hurt his back and groin.,1
An employee unloading furniture from a freight truck suffered heat stress and was hospitalized.,1
"On or about July 28, 2015, an employee was bitten by a cat during a restraint and received an infection. She was hospitalized.",1
An employee tripped in a ditch 4-feet deep by 3-feet wide and banged his face on a rock. He was hospitalized.,1
"On or about July 28, 2015, an employee's right index finger was crushed when it was caught between the body cage of a forklift the employee was operating and a truck trailer. The employee was hospitalized.",1
"On or about July 28, 2015, an employee sustained a partial finger amputation while cleaning out the manifold on a filler machine.",0
"On or about July 28, 2015, employees were moving 20-foot tall racking when a section fell, striking an employee on the head and resulting in serious injuries and hospitalization.",1
Employee admitted to ICU.  Employer indicated he was low in sodium.,1
An employee coating gas pipe with solvent experienced a burn to the left arm.,1
An employee was moving a meat slicer in the trash room. Protective gloves were not worn at the time. The employee sustained a left-hand finger amputation.,1
An employee was hospitalized with a broken right hip after exiting elevator bank 3 on the first floor of the J. Edgar Hoover Building.,1
"An employee slipped and fell on a recycle conveyor belt, resulting in a second degree burn. The employee was hospitalized.",1
An employee was donning a chemical suit when he lost his balance and fell. He was hospitalized with a fractured leg.,1
An employee engaged in tree cutting and trimming with a chainsaw fell approximately 30 feet to the ground below when his support rope was cut. He fractured his pelvis.,1
An employee was sweeping the warehouse floor with his head down. A forklift operator was driving in reverse when he struck the employee and ran over his leg. The employee was admitted to the hospital and underwent surgery for a left leg fracture.,1
"While moving a ladder to a tree, an employee stepped on a wet branch and fell 10 to 12 feet to the ground.",1
An employee working on a furnace experienced heat-related stomach and leg cramps and was hospitalized.,1
Two employees were removing a roll up door from a truck for repair.  One employee had the right pinky finger at the distal joint pinched hard enough to cause an amputation.  The second employee received a laceration needing sutures and an open fracture.,0
"An employee was cleaning the build-up off the tube mill roll with a rag. The rag pulled the employee's thumb into the nip point between the turkhead roll and the tube, amputating the left thumb.",1
An employee received an amputation injury from a latch installation machine after accidentally activating the machine.,1
"On 7/28/15, an employee had been operating lift truck. After getting off the truck, the truck moved and bumped into the employee's leg, breaking it.",1
"An employee's finger was amputated while cutting a 4-inch, 90-degree elbow with a band saw. The blade caught the elbow and pulled the employee's hand into the blade.",1
"On July 28, 2015, employees were attempting to pick up a concrete cure deck bridge. There were three employees (one in the fork lift and one on each side of the bridge holding tag-lines) performing the task. The employees attached rigging on both ends of the bridge to relocate it closer to where the pour will take place. During the pick, the rigging fell out of the hook causing one side of the bridge to fall and hit the employee fracturing the tibia/fibula.",1
A case of plums fell off of the third level racking system onto an employee working on the ground below.,1
An employee fell from a 4-foot ladder. The employee experienced temporary paralysis and was hospitalized.,1
An employee was hospitalized due to heat stress and dehydration.,1
"On or about July 28, 2015, around 10:00 p.m., an employee slipped on coolant in the machining center. The employee's right wrist hit a milled surface and was cut. The employee was hospitalized and required surgery.",1
An employee was connecting a pneumatic-charged hose to a piston assembly when the piston started operating. His left-hand little finger was amputated near the first digit and his ring finger was amputated near the second digit. He was hospitalized.,1
"An employee was hospitalized on 7/28/15 at 11:00 a.m., due to a fall while stocking the walk-in cooler/freezer, which resulted in a broken arm.",1
"An employee tripped over a box of oranges in the walk-in refrigerator. She hit her head against the door, scraped both forearms, and fell to the floor on both knees, fracturing one kneecap. She was hospitalized for surgery.",1
"An employee operating a rolling bar of a cold rolling machine (a machine which treads the metal bar) was injured during operation. 

The employee was running a previously treaded metal bar/bolt through the cold rolling machine; while standing on a one foot metal grading/platform.  The employee's shirt got caught on the spinning bar, and as the employee tried to break free, the employee's pant leg got caught, thereby flipping the employee over the bar onto a concrete floor and breaking his leg.",1
An employee was operating a pasting machine when he began feeling ill. He went to the break room and experience a rapid heart beat. He was hospitalized overnight for heat exhaustion.,1
An employee was moving a metal beam for a car lift and it fell on his left foot fracturing it. The employee was hospitalized for surgery.,1
"An employee was working on a dried vegetables turntable in the stuffing department.  The employee 's finger was along the side of the table when 1/8"" to 1/4"" of the right-hand index fingertip was amputated.",1
"On July 28, 2015 and approximately at 1:30 p.m., a welder was operating a milling machine in the machine shop to fabricate two sheet metal pieces for a printing press (screen printing industry). His left hand middle fingertip became caught in the two sheet metal pieces and a running drill bit of the equipment.",0
An employee become overheated while laying bricks during a construction project at a church.,1
Employee was working in a heated environment (106 degrees) and suffered dehydration.,1
"Employees are exposed to heat-stress related illnesses when working in the hot, humid greenhouse.",1
"An employee attempted to move a pallet jack, lost his balance, and caught his foot between the pallet jack and a stationary pallet jack.",1
An employee fell 4 feet from a ladder while cutting a barge cover with a cutting torch. He fractured ribs and was hospitalized.,1
An employee dropped a bottle of BX-DMANPA.  The bottle broke.  The employee cleaned up and worked the rest of the shift.  The employee went to the hospital and was admitted.  The employee had an irritated throat and an allergic reaction to the BX-DMANPA.,1
An employee fell approximately 8 feet from a loft that was used to store seasonal products. The loft is enclosed and employees gain access by climbing a ladder. The employee backed into a door that is normally locked and fell.  The door was unlocked at the time of the accident. The employee was hospitalized and required surgery for broken bones.,1
An employee passed out due to heat illness.,1
"An employee stuck her right hand into the covered (stout) part of the snow machine to remove stuck crushed ice. As she was removing her hand, the right middle finger was cut by a sharp metal object, resulting in a partial amputation of the fingertip.",1
"The injured employee states that she was up on a ladder, grabbing something from a top shelf (riser). As she was coming down, she slipped, reached out, grabbed a wire that caught a ring on her left ring finger, and de-gloved her finger. The injured employee required surgery to repair the injury.",1
An employee was working on a horizontal band saw while cutting stock material. He was advancing the material when his hand came into contact with the blade. His pinky finger and two fingers next to it were amputated. He was hospitalized.,1
An employee fractured her hip when she tripped over the base of a clothing rack in the ladies dressing department.,1
"An employee was pumping the chemical sump into a tote. He was attempting to connect a 1 in. hose to a portable sump pump via a hose clamp. He plugged the sump pump in before tightening the hose clamp, causing the connection to break and the chemicals to spray into his face. The employee was taken to the hospital and released. The employee is receiving medical treatment.",1
Part of an employee's left thumb was amputated while operating a circular saw.,1
"An employee suffered an avulsion to the left index finger when it was caught underneath a pipe.  The employee was inspecting a pipe when he/she lost his/her  footing and the pipe fell, catching the left index finger.",0
An employee was driving an electric pallet jack through the warehouse when her foot slipped. Her left leg broke when it got caught between a support beam and the pallet jack.,1
An employee was driving a golf cart into the storage area to park it for the day. He attempted to prevent the door from closing using his foot. His foot and leg got pinned between the golf cart and the door.,1
"An employee helping with drywall construction became overheated, felt dizzy, and had a light headache. He was hospitalized overnight and given fluids.",1
An employee was hospitalized as a result of a struck by hazard to the head.  An employee was operating a yard truck and attempted to disconnect from a trailer. The glad hand snapped and struck him in the head.,1
"After the galvanizing cycle, material (product) is no longer in the zinc, but is still inside the kettle, at which point two workers will skim the zinc off the top of the kettle. Two monorail cranes carry this beam in and out of the kettle housing. The cranes have chains connected to a bow that holds the beam. The chain between the lifting block of the crane and bow failed; one end of the beam fell, hit the molten zinc vat, and caused a splash. The injured employee was wearing a Nomex suit, face shield, and eye glasses at the time. The surface of this vat is at about waist level. The densest portion of the splash hit the injured employee in the groin, burned through the Nomex coveralls, and caused third-degree burns.  Another portion of the splash hit the employee on the chest/abdomen area and caused second-degree burns. A small splash of molten zinc also hit the employee's face, and the last portion landed on one of the injured employee's feet, causing a burn.",1
An employee was hospitalized overnight for heat exhaustion/dehydration.,1
The employee was stacking pipe when he was struck by a pipe. His ear was amputated resulting in an overnight hospitalization. ,1
An employee was hospitalized for heat stress after leaving work early.,1
"An employee was holding a ladder for another employee to access the top of a bulk propane tank.  When the employee was in motion to step off of the ladder and onto the tank, the ladder slipped and amputated the employee's right hand thumb.",0
An employee was hospitalized due to extreme heat.,1
"An employee was unloading a freight trailer pallet loaded with groceries. While in the trailer, a pallet shifted and fell on the employee's leg. The employee was hospitalized with a possible broken leg.",1
"An employee fell from the top of drums loaded on the rear of his service truck while trying to reach absorbent materials. He struck the shelves in the truck, straining and tearing a back muscle.",1
"On or about July 29, 2015, an employee sustained facial injuries after losing balance and falling to the ground striking his/her face on the floor.",1
"An employee was cutting a metal panel with a saw when the blade broke, hitting and cutting his face.",1
"An employee was trying to close a window. As he pushed the window, it broke causing a deep laceration to the little finger on the left hand on the bottom side near the joint. Additionally he had a smaller laceration on the left wrist.",1
An employee was pulling clots when he felt a pain. He went to the hospital for a hernia.,1
An employee was cutting open a steel barrel. He set the plasma torch/cutter on a barrel beside him and the barrel exploded. The force of the explosion broke his arm.,1
"An employee operating a high-reach truck ran into the forks of another high-reach truck. The forks of the other high-reach truck were approximately 1 foot above the floor. The employee sustained a fractured tibia and fibula and crushed knee on the left leg, requiring hospitalization.",1
"On or about July 29, a temporary employee assigned to demo a commercial building was standing on a six foot ladder pulling speaker and telephone wire when he fell 4-6 feet to the concrete floor breaking his arm and cutting his shoulder.",1
"On or about July 29, 2015, an employee sustained injuries consistent with electrical shock while filling a pop machine.",1
"On or about July 29, 2015 an employee operating a side boom crane was injured when his right ankle was caught between the wench of a backing bulldozer and the bumper of the boom.  The side boom crane operator was attempting to hook up the wench at the time of the accident.",1
"On 7/29/15, an employee was walking to the assembly area when she fainted. She was hospitalized and treated for severe dehydration.",1
An employee was arc welding brackets on an overhead conveyor with an electric welder when a spark fell on his shirt and caused it to catch on fire. He suffered burn injuries to his back.,1
An employee was working in an apartment complex installing CFLs/aerators/shower heads for energy efficiency. The employee began experiencing signs of dehydration (light-headed and dizzy). The employee drove himself to the hospital and was admitted.,1
An employee was finned by a catfish while picking up and sorting the fish. The employee's fingertip was amputated after becoming infected.,0
"An employee was delivering packages. He experienced a gradual onset of cramping in his arms and legs, followed by nausea. He was hospitalized for treatment of heat stress and dehydration.",1
An employee was walking into the switchboard area and turned to leave the room. The employee tripped on a table leg near the door. The employee fell to the floor fracturing her hip. The employee was hospitalized.,1
An employee was filling propane at a Lowes in Herkimer and received propane burns on both legs.  He was admitted to the hospital for first and second degree burns.,1
Employee caught his left calf in a hydraulic spooling machine during well drilling.,1
An employee was helping the lead repairman remove the fan drive from a truck. Both were using a long handle torque wrench. The employee was assisting for leverage. The lead repairman was pushing down the wrench and the employee's right hand was in the way. The employee had 3/4 inch of the tip of his right hand ring finger amputated.,1
An employee received flash burns as he worked near overhead powerlines.,1
An employee trimming trees fell approximately 40 feet when the main climbing line anchor broke.,1
"An employee was coming out of a hole with tubing when the tubing broke. A pipe fell and hit the employee on the head, causing the employee to lose consciousness. The employee was wearing a hard hat at the time. The employee was hospitalized overnight with a mild concussion.",1
"Two employees were in a UPS delivery truck trying to replicate an issue a driver had reported with the truck. When the driver took a hard left turn, the employee in the passenger seat fell out of the truck and landed on his head, requiring hospitalization. He was not wearing a seatbelt at the time of the incident.",1
An employee had his left ring finger amputated when a 35 pound form fell on his hand.  He was carrying the form. He tripped and dropped the form and it landed on his fingers.,0
"An employee was pouring metal from a ladle. As the employee was moving the ladle down the line, the tip of his right index finger got caught between the ladle and the I beam. The employee had about a pencil eraser width of his fingertip amputated.",0
An employee working South of Delta cooling tower was removing a 380 lb. stuffing box from packaging using a grove crane. The crane was not involved. As the employee was moving the stuffing box on the skid he pinched his left pinky between the box and the shipping crate amputating his left pinky tip.,0
The employee was working on a ladder.  The ladder broke causing the employee to fall 8 feet to the concrete.  The employee broke his left femur.,1
An employee delivering mail felt dizzy and passed out. The employee was hospitalized for heat stress.,1
"An employee was delivering a package to the door of a residence. When he walked up the steps of the residence, he felt something pop in his hip. He sustained a hairline fracture on the neck of his hip and was hospitalized.",1
"On July 29, 2015,an employee standing on a tubular steel beam hanging sheeting, untied his safety harness and was in the process of crossing a vertical beam when he slipped and fell resulting in a compound fracture of his right leg.",1
A concrete saw operator complained about not feeling well and was admitted to the hospital for a possible stroke or heat stroke.,1
An employee was hospitalized and provided IV fluids for dehydration.,1
An employee suffered heat exhaustion and was hospitalized.,1
"Two employees were traveling between buildings in a golf cart. Road conditions were wet and slippery from recent rainfall. The golf cart was traveling downhill, and the driver slammed on the brakes to stop the cart. The golf cart overturned, throwing the injured employee out. The cart landed partially on the employee, fracturing his left arm and injuring his shoulder. He was hospitalized for treatment. The injured employee was not wearing a seatbelt at the time.",1
"An employee was doing landscaping work at a new apartment complex and started feeling lightheaded, dizzy, and sick. The employee was hospitalized for heat exhaustion.",1
An employee was performing MIG welding operations in the hopper department for 4 hours when he became overheated. He passed out and was hospitalized.,1
"While opening a rolling wall in the ballroom of a hotel, an employee's right-hand middle finger got pinched between two portions of the rolling wall. The employee was hospitalized and his middle fingertip was amputated.",0
"An employee was working on a wildlife habitat improvement project. While lifting a rock, he twisted and injured his back, requiring hospitalization.",1
"An employee became sick after mowing and edging the grass at the Omni Hotel and Resort in Fernandina Beach. The employee was hospitalized on July 29, 2015, for dehydration.",1
An employee was working on a refuse truck collecting garbage and putting it into the truck.  He became ill and started vomiting.,1
"An employee experienced severe cramping in both legs, an arm, and a hand while walking back to work after a rain storm. The employee was hospitalized for treatment and observation for heat exhaustion.",1
"During a fall protection training session, an employee was choked unconscious from the fall protection system.",1
A delivery driver experienced dehydration symptoms while on his route.  He contacted his supervisor for assistance.  The supervisor then took the driver to the hospital for treatment.  The driver was admitted and provided fluids. ,1
An employee was operating a debarker at a lumber yard.  A limb got stuck and the employee attempted to remove it by wrapping the chain around the limb and using the hoist. The limb came free and hit the deck where the employee was standing and then hit the employee in the foot.,1
"An employee was delivering mail when they experienced dehydration, kidney failure, and heat illness due to heat exposure. The employee was hospitalized for dehydration.",1
"An employee missed a step while descending a step stool, spraining the left ankle and requiring surgery.",1
"An employee was operating a motorized pallet jack when he bumped into a stack of adjacent pallets. The pallets fell on him, causing contusions to his head, arms, legs, and hands.",1
An employee completed his deliveries for the day and later experienced cramps. He was hospitalized overnight for dehydration.,1
The top part of an employee's thumb was amputated on a table saw.,1
"An employee was struck by a garbage truck while on delivery route, requiring hospitalization for a serious leg injury.",1
An employee became nauseous and began vomiting. He was hospitalized overnight for heat exhaustion.,1
"An employee's left hand was struck by a mixer blade while he cleaned the concrete mixer.  His fingers broke and were badly scraped, requiring surgery.",1
"An employee launching a pig and carrying a pushing rod ran to help a coworker when his legs gave out 
and he collapsed.",1
An employee was wiring an exit sign when he received an electrical shock and suffered a severe burn to his finger.,1
"An employee drove a forklift (standup pick truck) to the end of an aisle way and was unable to stop before running into stopping blocks and a wall. The collision crushed his right foot between the operator platform and the cart that he was carrying, amputating three toes and partially amputating one toe.",1
An employee slipped and broke their patella.,1
An employee's finger was partially amputated in the chipper.,1
An employee was polishing a 3-inch diameter part on a lathe when her hands and arms were drawn in and injured. She was hospitalized.,1
"An employee was found on a pallet by a coworker. The employee had fallen from a man lift and was crushed by it, breaking all of his ribs and requiring hospitalization.",1
An employee received arc flash burns while cleaning off insulators on a transformer.,1
An employee was supervising the loading of material onto a pallet when some of the material fell on his left leg.,1
"An employee slipped while walking in the store, injuring his left elbow and requiring surgery.",1
An employee was delivering a package to a location on 7/30/15 and was approached by five to six men. The men shot the employee in the right hip and in the middle of his abdomen. The employee was hospitalized.,1
"An employee was going to install anchorage and tie off to a 6/12 pitched metal roof for a small repair job. The employee waited for the roof to dry for about an hour. However, the roof was still wet and he slipped and fell off the one-story roof onto the concrete patio of the residence. He landed on his legs, suffered a fractured knee cap, and required surgery.",1
"An employee fell approximately 6 feet to the ground while checking/repairing a cable line at a customer's house, injuring his elbow and requiring surgery.",1
An employee was working on a pump when material that was 45% potassium hydroxide sprayed out and contacted his face.,1
"An employee accessed the roof to attach his fall protection at the peak so he could start loading shingles. He stepped on a toe board, which dislodged and caused him to fall 10 feet to the ground. He was hospitalized with a back injury.",1
An employee cutting meat with a band saw in the meat room received a deep laceration to the right hand between the index and middle finger. The push plate guard was removed while the band saw was in operation. ,1
"On Thursday, July 30, 2015, an employee suffered a left-hand index fingertip amputation while using a 130-ton hydraulic press brake with another operator.",0
An employee injured the back of his head when he passed out and struck it against the pavement. The employee passed out after pouring ice water over his head while taking a break from doing landscaping work.,1
"An employee operating a baler-compactor was injured at 2:52 PM on July 30, 2015. The employee's right hand was caught between the machine and a raised bucket. The employee was hospitalized overnight and required surgery to amputate two right-hand fingers.",1
An employee was hospitalized overnight to receive fluids for swelling and a painful wrist injury from moving a parking berm.,1
"An employee saw a customer stealing brake fluid and followed the customer to the parking lot in front of the store. The customer assaulted the employee with a window squeegee and fist and then ran away. The employee was hospitalized for facial fractures, broken teeth, and brain hemorrhaging.",1
An employee was picking orders in a warehouse area while riding a powered pallet jack. His left foot was run over by the pallet jack when he stepped off. He was hospitalized.,1
"While working with a coworker to remove a spare tire from under a vehicle, the spare tire fell and crushed an employee's left thumb. One quarter of the employee's left thumb was amputated.",0
"In the loading bay, an employee was standing next to a parked vehicle. He moved a loading cart out of the way. A coworker was driving an armored truck, and the rear tire well hit and pinned the injured employee between the two trucks. He sustained punctures and contusions to his right-leg calf.",1
"An employee was going to turn a switch that adjusts the wood planner settings on a lumber conveyor. The employee sustained a fractured leg while standing on the conveyor, which was located approximately 2 feet above the ground.",1
"On Thursday, July 30, 2015, at 10:15 AM, an employee was placing rectangular inserts into the press to form a window, which is the internal section of a transformer. The employee's hand was either crushed or mashed, resulting in an amputation of his right thumb tip.",0
An employee made contact with an energized conductor on a transformer while performing a test. The employee received electrical contact burns to the right hand. ,1
An employee felt sick while sitting in his crane and showed signs of heat illness. He was hospitalized for severe dehydration.,1
"An employee had used 2x4 to chock a trencher wheel. While working on the trencher, the wheel slid and caused the trencher to fall on the employee's arm, breaking the right humerus and requiring surgery and overnight hospitalization.",1
An employee was burned by hot water while disconnecting a pump hose that was under pressure. He was hospitalized.,1
An employee was using a punch press and attempted to remove the gasket from the point of operation. The employee's right index and middle fingers were amputated.,0
An employee was using a groover machine when the employee's left index and middle fingers came into contact with the machine's point of operation. A portion of the left index and middle fingers had to be amputated.,0
"An employee was using a pneumatic torque wrench while working on a well head. The employee lost control of the wrench, which struck his right thumb and fractured the bone.",1
"On July 31, 2015, at approximately 11:00 a.m., an employee was hospitalized after experiencing dizziness, cramping, nausea, and severe sweating due to possible dehydration.",1
"An employee was offloading aqua ammonia from a truck at a customer's site. The employee closed the valve on the customer's side. He disconnected the hose on the truck side, but did not close the valve. The employee was exposed to aqua ammonia fumes and hospitalized.  He was wearing a respirator at the time of the incident.",1
"An employee was injured while attempting to remove a cat from a kennel. The employee was bitten on the left thumb, causing two puncture marks on the left thumb.",1
"At 11:45 a.m., a piece of lumber kicked back while an employee was fitting board through a machine. Three pieces of the lumber got stuck in the employee's forearm, requiring overnight hospitalization.",1
"An employee carrying a tote walked up to the large trash compactor to dump the tote contents. A coworker rolled up a pallet jack carrying a large box to the compactor and struck the employee, pushing him into the trash compactor. The employee's right upper leg broke, requiring hospitalization.",1
"An employee was changing out a pole-mounted transformer. A wire that the employee touched was still energized by the overhead powerlines. The employee was shocked by 7200K volts, suffering electrical burns to both hands and memory loss and requiring hospitalization.",1
"An employee had been working outside at a jobsite in downtown Atlanta, Georgia. He was hospitalized for heat exhaustion.",1
"At the company location, an employee was struck in the head by a board that got caught in the powered rolls and shot out of a wood grinder.",1
An employee felt pain in his groin after lifting a heavy package. He was hospitalized.,1
"While descending a ladder, an employee encountered a wasp nest. The employee was attempting to swat at the wasps when he fell 6 to 8 feet onto the concrete, causing the employee to break his left hip and fracture his right knee.",1
"An employee was spraying water onto scrap steel that had spilled out of a furnace and had been cut into pieces using an oxygen lance. A steam explosion occurred, causing a second degree steam burn to his face and hands.  He was hospitalized.",1
An employee received a laceration to the lower right leg while cutting metal. The completed cut of metal fell from the saw table and struck the employee's leg. The employee was hospitalized overnight.,1
"An employee fell 13 feet, 6 inches, to the ground while inspecting a roof. The employee cracked several ribs and was hospitalized.",1
An employee was putting in a residential service when he suffered heat stress.,1
"An employee tried to clear a jammed part in a machine.  When he reached in, the part moved, pinching and amputating his fingertip.",0
"On 7/31/2015, at approximately 7:30 a.m., an employee in the Intensive Care Unit (ICU) was helping a patient turn her body, so that the file film for x-ray preparation could be placed beneath the patient's body. The employee began to walk around the patient's bed when she tripped over IV tubing and fell to the floor. She sustained a right-leg femur bone fracture and bruised her face.",1
"An employee was operating an auto-bend machine. She was inserting a piece of metal bar into the machine when her finger got caught in the machine. Her finger was smashed between the metal bar and the tubing, resulting in a right middle fingertip amputation.",1
An employee was exposed to molten iron when it poured on his foot.,1
An employee was stabbing a mud tool into casing when the employee's left-hand thumb was amputated just behind the thumb nail. The employee was hospitalized.,0
An employee was unloading a tractor from a trailer on a customer's property when the brakes disengaged and rolled on top of the employee. The employee sustained left shoulder and right knee injuries.,1
"An employee re-aggravated a prior back injury while bending over to pick up an item, experiencing pain and falling to the floor. She was hospitalized.",1
"A forklift backed over an employee's right foot, resulting in hospitalization.",1
"At approximately 1:55 p.m., on 07/31/15, an employee was performing heat sealing on cotton bags.  A coworker dropped a cap onto the floor. The injured employee bent down to pick up the cap while placing her hand inside the platen press point of operation. She stepped on the guarded foot pedal, cycling the press onto her hand. She received second degree burns to her left hand, requiring hospitalization.",1
"An employee was changing a shear's die using a hoist. The die became lodged by a piece of dowel. As the employee reached to check where it was stuck, the die dislodged while still under the tension of the hoist, causing the die to move upward and pinch his middle and ring fingers.  Approximately 1/8"" of the employee's left middle finger was scraped.",0
"An employee was overseeing a natural gas line repair contractor at the intersection of West Glen 7 North Monroe, Ridgewood, New Jersey. The employee experienced dizziness and light-headedness and was hospitalized for treatment of dehydration and low sodium.",1
"An employee stepped up 6-1/2 inches to his work station and rolled his ankle, fracturing it and requiring hospitalization.",1
"While grinding a gray iron cast, the casting got caught and pulled an employee's finger into the grinder. He sustained a partial amputation of the left-hand little finger.",0
"An employee was using a handheld circular saw to rip cut a short piece of wood stock. The injured employee was positioned close behind the circular saw, helping to hold the short 2 X 6 wood stock.  The blade became bound, causing the circular saw to kick back. The blade struck and amputated the injured employee's left-hand thumb, requiring surgery.",1
"An employee fell approximately 18 feet from a ladder. He was hospitalized with fractured ribs, a fractured clavicle, a collapsed lung, and numerous contusions and abrasions.",1
"An employee was laying a culling table on its right side to access its underside. He tilted it towards himself by reaching across to the far side with his left hand and grasping the near side with his right hand. As he was laying it over, the top edge was approximately 6 inches from the floor when the table legs slipped. He lost control of the table, which fell and struck the floor. His fingertip got caught between the tabletop edge and floor and was amputated. He was hospitalized.",1
"A Baker Boy Bake Shop, Inc., employee was hospitalized after receiving burns from hot water measuring approximately 180F while cleaning a conveyor oven.",1
"An employee was on the back of a flatbed trailer inspecting a load for accuracy before the truck left the store for a delivery. The employee fell off the flatbed, struck his head upon landing, and was hospitalized.",1
"While an employee operated a motorized pallet jack, his right pinky finger got caught and severed between the handle of the pallet jack and a metal machine.",0
"A maintenance employee was getting a glass to rinse out his mouth after having some coffee. He immediately noticed the water tasted funny and spit out the water. A chemical sanitizer, pH+, used in the facility had back-flowed into the potable water lines and contaminated the drinking water. The employee's lips, inside of the mouth, and tongue were burned.",1
"On 08/01/2015, at 0700 a.m., an employee was removing chilled iron from a cupola moat when he sustained burns to his hands, arms, and face. The employee drove the bucket loader into the moat after water was applied to hot sand, which caused steam to burn the employee.",1
An employee was walking his mail delivery route when he experienced heat stress symptoms. He was hospitalized and treated for heat exhaustion.,1
"An employee operating heavy equipment was backing a unit into the trailer when the employee lost control of the unit. The employee was hospitalized with head, mouth, and nose injuries.",1
"An employee working on the automated parcel bundle sorter machine fell to the floor after tripping on a piece of strapping material. The employee's left arm was injured, requiring hospitalization.",1
An employee was unloading a produce truck using a powered pallet jack. He backed into a parked forklift and his arm got caught between the forklift's arms. He amputated his right middle fingertip.,0
"An employee working in the kitchen was walking past a co-worker who was working near a dish cart. The employee tripped over the co-worker's foot and fell, suffering a broken hip.",1
"Schindler Elevator employees were removing a 17,000-pound escalator on a dolly. One of the employees tripped, causing him to knock the injured employee to the ground. The injured employee's pinky and right ring finger were then run over by the loaded dolly. The employee was hospitalized and had surgery.",1
"An employee was removing a door. The door fell, striking him on the left side of his head.",1
"An employee was landing in a jump spot. Upon landing, the employee ran into a coworker who was already on the ground and pulling his parachute in. The employee was hospitalized with C6 and C7 neck fractures.",1
An employee was lifting a 5-gallon oil container to empty it when he felt a pop. He was hospitalized with a collapsed lung.,1
"While moving a scissor lift, an employee stepped onto the forks of another parked forklift. His foot got stuck on the forks and he fell, injuring his left hip socket.",1
"An employee was called to help with an unruly patient. The patient became violent and hit the employee in the jaw, breaking both jaws and knocking out several teeth.",1
An employee was overcome by heat while welding building structure materials.,1
"An employee tripped on a pallet of merchandise and broke her hip, requiring surgery.",1
"An employee was cleaning a running tortilla conveyor belt when his left-hand, fifth finger got caught and partially amputated.",0
"An employee was installing a kick panel on a forklift when his finger scraped along the top edge of the panel, cutting his fingertip. He was hospitalized for an amputation.",1
An employee's finger got pinched between a stationary forklift and a cart loaded with metal products. The finger was amputated.,1
"On August 03, 2015, at approximately 4:00 p.m., an employee operating a forklift was loading a metal part onto a pallet. A second employee saw the part rolling and attempted to stop it with his foot. The pipe rolled off the pallet and his leg got caught and injured under the part.",1
A maintenance employee was working on a machine with a coworker when his right index finger got amputated in a rotating area.,1
An employee was setting a pumping unit using an impact hammer. The employee was hospitalized for heat stress.,1
An employee suffered a right index fingertip amputation while closing a parking gate.,0
An employee climbed up on to the roof to power wash a mounted air conditioning unit when he fell 7 or 8 feet and was hospitalized. No fall protection was worn at the time.,1
An employee working on the ground was disassembling the boom of a crane to add another section. A section of the boom landed on and fractured the employee's lower left leg.,1
"An employee was troubleshooting a strapping machine and spraying WD-40 into it when his hand felt like it was going to sleep.  He rested his hand on the machine, and his ring and middle fingers were placed in a pinch point. He fractured two bones just below the nailbed, requiring surgery.",1
An employee broke a leg after stumbling over a die.,1
An employee was going up a ladder to the roof to perform tack welding. He had a safety harness on and was trying to tie from the ladder when he fell off.,1
"An employee got caught between two steel forms, resulting in a broken leg and overnight hospitalization.",1
"An employee was tracking a group of illegal aliens down river when he fell into a ground pit that was 15 feet deep, resulting in broken ribs and a punctured lung.",1
An employee was standing on the back of a box truck when he turned and fell off. The fall was approximately 42 inches. He hit his head and was hospitalized.,1
"An employee was performing maintenance on a polishing machine. The employee was opening the plate/platform to get inside the machine to remove a part. After stepping in the open area of the machine, the employee felt a sharp pain/burning sensation in the right abdomen area. The employee suffered a hernia.",1
An employee was walking on a steel beam when his personal fall protection got hung up on a wire rope clip while anchored to a horizontal life line. He fell approximately 10 feet to the steel deck below and broke his leg.,1
An employee was cleaning out a mixer when his right thumb tip was amputated. The mixer was not turned off at the time.,1
"An employee slipped on a scaffold ladder rung, lost his grip, and fell approximately 14 feet to the ground.",1
"On or about August 3, 2015, an employee was painting from a step ladder that was positioned on a scaffold. The employee fell, breaking the orbital bone, nose, jaw, and both wrists. The employee was hospitalized.",1
"On or about August 3, 2015, an employee was struck by a man lift while walking down an aisle.",1
"On August 3, 2015, at approximately 8:48 a.m., an employee was operating a pie and tart press machine. The employee's hand reached into the machine, and his finger got squeezed between both plates during the pressing process. His fingertip was amputated.",1
"An employee was using a handheld drill to drill into a part when the employee's glove caught the drill bit, amputating the left index fingertip.",0
"An employee was filling a bend with hot water when the hot water spilled on him, causing serious burns.",1
An employee fell off an extension ladder.,1
An employee was hospitalized as a result of a left upper arm injury.,1
"An employee was attempting to take a sample from the brownie blender. He lifted the lid of the blender. The lid came down and struck his right ring finger, amputating the fingertip.",1
An employee was walking across Route 367 and was struck by a motorist's SUV.,1
An employee climbed up a ladder to replace a faulty aerial drop at the mid-span connection point. He fell from the ladder and sustained a left forearm compound fracture.,1
An employee was hospitalized after being nauseated and throwing up from working outside in the sun for some time.,1
An employee got caught in the top plate of a shaper in the dovetail department. The employee was hospitalized for surgery on three left-hand fingers.,1
"A Wood Products, Inc., employee was injured when his hand came into contact with a chop saw blade. The employee was hospitalized for nerve repair.",1
An employee was hospitalized due to heat-related symptoms.,1
"An employee was walking up some steps and fell. During the fall, he cut his right bicep on a piece of metal.",1
"On 8/3/15, at 10:00 a.m., an employee amputated the left thumb tip while cutting cabbage. The employee's cutting gloves had holes in them at the time.",0
"On or about August 3, 2015, an employee suffered a fingertip (left ring) amputation after entering the point of operation of the hydraulic brake press during production.",0
An employee was picking up a mail tray on the bottom of a rack when the employee felt back pain.,1
Employee was in a boom lift elevated approximately 7 ft. high and was maneuvering the lift backwards when he became pinned between an aircraft wing and the lift.  The employee was hospitalized with trauma to his abdomen that required surgery.,1
An employee was working in the middle foundry molding area when he stepped in a hole and broke his left ankle.,1
"An employee was unwrapping a pallet on the back of a truck. The employee slipped on the plastic, fell off the truck, and was injured, requiring hospitalization.",1
"An employee was operating a PIT when he put his left hand down into the bracket that holds the battery. The employee's finger got caught and crushed between the battery and the bracket, resulting in a fingertip amputation.",0
"On August 4, 2015, at approximately 7:45 a.m., an employee was starting to descend from a crane. As he bent down to grab the hand rail, he flexed his knee and his knee popped. He then called for help to get down from the crane.",1
An employee opened a rail car that contained sulfur and was possibly exposed to sulfuric acid vapors. The employee either jumped off the rail car or fell off the rail car.  The employee was not wearing fall protection or a respirator. The employee was taken to the hospital.,1
An employee was making adjustments on the paper feed of a printer when four fingers on his left hand were crushed to the second knuckle in the rollers. He was hospitalized.,1
"A metal ladle struck an employee in the back, resulting in burns.  An interlock failed and the employee was not protected at the time.",1
An employee was photographing/documenting shipped items on the loading dock. The employee's foot got run over by a fork truck and the employee's leg also broke.,1
"An employee operating a reach truck was trying to avoid a column. While trying to steer clear, she stuck her foot out and fractured her left leg.",1
"An employee was moving a beam with a crane. He unhooked the beam and was lifting the hook when the hook caught the beam. The beam fell, striking him and breaking his right femur. He sustained a compound fracture to the right femur bone.",1
An employee was picking up a piece of equipment when a mechanism broke off and fell on the employee's lower right leg between the knee and foot.,1
"An employee was trying to move a trailer with a trailer dolly. The trailer slipped off the dolly, causing the dolly to fall on and fracture his ankle.",1
An employee was working at a sub-station when he experienced cramps and fatigue from hot weather conditions. He was hospitalized for treatment.,1
"An employee was using powered industrial equipment (picker) to retrieve products from a rack.  He was struck by another powered picker machine and his foot got caught between that picker and the rack. He sustained a laceration on the bottom of his big toe and second toe, and his big toe broke. He was hospitalized.",1
An employee's finger was partially amputated in the pinch point of a weave machine loom.,0
"On or about August 4, 2015, an employee was staging coils with a crane. The two coils came together, pinching and amputating the employee's left middle finger.",0
An employee was hospitalized as a result of a right hand injury.,1
An employee was hospitalized due to an ankle fracture. ,1
"An employee was running a billet saw and attempted to clear a jam. His glove got caught and his hand was pulled into the saw blade, cutting his right middle finger and right thumb and requiring hospitalization.",1
An employee working in the store's back room twisted her ankle while pulling a cable from a two-way radio. She fractured her right ankle and was hospitalized.,1
An employee's foot was run over by an electric power jack and his toe was amputated.,1
"An employee had a piece of weed eater cord tied around his left thumb while driving a golf cart. The weed eater string became entangled in the wheel of the golf cart, causing a partial amputation of his left thumb below the fingernail.",1
An employee was using a jointer to join two pieces of wood when his left hand slipped into the blade. His left ring finger was amputated.,0
An employee was doing maintenance on a machine. His right index finger got caught and the fingertip was amputated.,0
An employee was standing on the floor of a trailer and pulling a piece of furniture. The employee lost his footing and fell to the floor of the trailer. He was unable to get back up and was hospitalized with a hip fracture.,1
"During a baseball game, an employee was struck by a line drive to the head, suffering a skull fracture and dermal hematoma.",1
"On or about August 4, 2015, an employee was moving a glass panel from one location to another when the panel slipped and landed on his legs.  He was hospitalized.",1
"On or about August 4, 2015, an employee installing safety guard rails on the second floor of a building began to feel ill and experienced cramping. He was hospitalized overnight for heat-related illness.",1
"An employee was walking on freshly lain concrete blocks when one of the blocks 
came loose. The employee fell, landing on his face and hitting a PVC pipe.",1
An employee sustained an amputation while operating a rolling stainless steel plate machine.,1
"An employee was struck by an excavator and got pinned between a building column and the excavator. The employee sustained two broken ribs, a broken shoulder, a punctured lung, and a crushed artery in his right arm.",1
An employee was attempting to replace an air-conditioning louver on an inside duct when an air filtration unit fell and struck the employee's right pinky finger.,1
"An employee was standing on a piece of equipment.  The drum that spools the cable caught his foot near his left little toe, and the toe was amputated.",1
An employee was retrieving a check from a safe in the manager's office when she closed the safe door on her right ring finger.  Her right ring fingertip was amputated.,0
An employee was loading a packaging machine when her pinky finger got pulled into the machine.,1
"An employee was wrapping a load when a log rolled off the load and came down on top of him. The log hit his torso, cracking his ribs, puncturing his lung, and requiring hospitalization.",1
"On 8/4/15, an employee riding the back of a waste collection truck operated the sweep blade control. The truck was in motion at the time. His foot got stuck between the sweep blade and the truck. Three left-foot toes were amputated.",1
"An employee was entering warehouse through a pedestrian door. When the employee reached back to engage the warning buzzer, the door came back on the employee's hand, crushing the left middle finger and resulting in a subsequent amputation.",0
An employee was operating a lathe on 08/04/2015 when he got some of the shavings in his fingers. He attempted to remove the shavings himself. His finger became infected.,1
"An employee was cutting metal rebar with a powered saw on the Staten Island Expressway (Exit 13) when the saw exploded, splashing gasoline onto the employee's legs. The gasoline caught fire, and the employee sustained third degree burns to the legs. The employee was hospitalized.",1
"An employee was using a pedal-activated form roller. The employee was preparing to feed a piece of metal into the form roller, holding the metal above the machine when he inadvertently actuated the foot pedal. His glove got caught in the rollers, and his hand was pulled into the rollers.",1
An employee was lifting a coil with a hoist and chain when the coil fell on him.,1
An employee was mowing a lawn using a riding mower.  The employee was mowing on a hillside with wet grass when the mower began to slide down the hill.  The mower eventually contacted a parking curb and the employee was ejected from the mower. His left foot got caught under the mower deck and he sustained amputation injuries to the two small toes on his left foot.,1
"An employee was inspecting a center pivot corner system to determine why the nozzles on the corner arm and overhang were not functioning properly. While navigating the corner arm platform, the platform tipped and caused the employee to fall to the ground and break his leg.",1
"An employee was cleaning and lifting a screen on a vibrating conveyor when the screen fell, smashing and amputating her pinky finger.",0
An employee was closing off a pressure release valve when hot water sprayed his left arm and stomach.,1
"A maintenance employee was troubleshooting a rotary valve for a pallet on the roof. While cleaning debris around the plug inside the fitting valve, the employee's finger was amputated by rotating blades. The unit was running at the time of the incident.",0
"An employee fabricating highway signs was welding on a metal plate (approximately 530 pounds and 28""x33""x2"") when the tack-welds gave way and the metal plate fell onto and crushed the employee's right leg.",1
An employee was cleaning the gluer rollers with a rag when his right hand got pulled into the rollers. The equipment was running at the time of the incident.,1
A chef was working when he started to feel fatigued. He was admitted to the hospital for dehydration.,1
"An employee lost three right-hand fingertips in a pants press, which operates by foot pedal and closes on the pant leg.",0
An employee was struck by a vehicle in the driveway behind the quick lube service area.,1
"On August 5, 2015, at approximately 4:00 p.m., an employee sustained a left index fingertip amputation when it was pinched between two crane pads that were being loaded by a crane.",0
An employee was holding a cat for a veterinary exam when the cat turned its head and bit into the employee's left-hand tendon between the index finger and thumb.  The employee required surgery.,1
"While getting out of a tugger, a maintenance employee tripped over something, fell, and could not stand up. He broke his right femur just below the hip on his right side and was hospitalized.",1
An employee was overcome by heat stress while conducting oil-well servicing operations.,1
"An employee was delivering parts when a shoe string got caught on a door stop at a customer's worksite. The employee tripped and fell, injuring the left knee.",1
"On August 5, 2015, at approximately 12:00 p.m., an employee exited the cab of his crane and fell to the ground, fracturing his right hip. He was hospitalized.",1
"An employee was descending a ladder after loading a high ceiling when he fell from the third rung to the floor, fracturing his vertebrae.",1
"An employee got up to quickly address a patient's alarm. She tripped and fell, lacerating her head and fracturing her arm.",1
"On or about July 7, a window clerk was handling an express mail package when she felt a pop in her neck. The employee went to hospital the next day for a neck injury.",1
"An employee operating a lawnmower in the median was struck by a car that swerved into the median. He sustained injuries to his right leg and chest and experienced bleeding from his ears, requiring hospitalization.",1
"An employee fell from a ladder, striking his head.",1
"On August 5, 2015, at approximately 2:30 p.m., an employee was using plasma cutter to cut a length of 2-inch pipe. The pipe was on an automated table that uses rollers to move the pipe down the line and out of the building for offloading. Towards the end of the process, the employee pushed the pipe to speed up its exit from the building. His glove got caught by the roller, which pulled his arm in and trapped him between the roller and a metal bar. He fractured bones in his arm and hand that required surgery.",1
"An employee fell off of an 8-foot ladder while installing metal canopy.  A beam fell, knocking the ladder out from under the employee who broke a rib and punctured a lung.",1
An employee working on electrical service started having cramps and was eventually hospitalized.,1
"An employee was performing normal work duties doing a ""meter run"" when he started to feel badly and went to the Arnett office.  Employees/management at that location thought the employee was suffering from heat related issues and called an ambulance.  The employee was treated at the hospital for heat stress.",1
An employee was mopping a staircase with multiple sections and landings when he misstepped and fell onto the corner edge of the lower level step.,1
An employee was cutting a wood plank with a powered circular saw when the saw kicked back and amputated the right-hand middle fingertip.,1
"An employee was pinning tubing together to skid the rig. The employee's hands were placed between the two pieces, and the left pinky and ring fingers got pinched. Both fingers were surgically amputated.",0
An employee was trying to remove a piece of geo-fabric while installing a 24-foot stormwater pipe when his hand got caught between two sections of the pipe. He partially amputated his left ring finger and lacerated his left middle finger.,0
An employee at a customer site injured her leg when she tripped and fell on customer-owned exercise equipment.,1
An employee carrying mail was hospitalized with heat-related illness.,1
An employee was leading a guided tour when a child started to fall. The employee stretched out to grab the falling child and broke his right ankle.,1
"On August 5, 2015, at approximately 3:15 p.m., an employee was cutting meat on the power meat saw. He tried to cut some very thin steaks and lost his grip; his right thumb came into contact with the meat saw blade, and his right thumb tip was amputated.",1
An employee became ill from the heat on his delivery route. He was hospitalized for treatment.,1
An employee was cutting pork chops with a meat saw when the employee's right thumb sustained a partial amputation/severe tissue damage.,0
The last digit of an employee's right-hand index finger was amputated.,0
"On August 5, an employee was cleaning floors and equipment when he hit his head walking underneath a conveyor. He experienced headaches and was eventually hospitalized with a brain blood clot.",1
An employee was moving cattle to a pen and went to split the cattle herd. The horse the employee was riding tripped and fell with the employee.,1
An employee amputated two fingers.,1
An employee was descending from a pole and got into a neutral position. He unclipped his belt and fell approximately 20 feet.,1
On 08/05/15 at 6:45 pm an employee was moving a steel I-beam with an overhead crane. The rigging caught the beam and the beam fell on the employee.  The employee was hospitalized with a broken right femur.,1
An employee's right hand got crushed when caught in the nip point between two rollers on a paper winder. The employee's middle and ring fingers were involved.,1
An employee's fingertip was amputated while cleaning a filler machine.,0
An employee was working as a laborer cleaning a new road that was done by the company. The employee walked over to a tree and passed out.  The employee was taken to the hospital and admitted for heat stroke.,1
"On 8/5/15, at 7:30 a.m., a new employee received an employer-required vaccination for measles/mumps/rubella. Approximately 30 to 45 minutes after the injection, she experienced an allergic reaction; her neck swelled.  She was hospitalized and treated.",1
"On August 6, 2015, an employee working on a gas leak inside of an excavation was bitten by an unknown insect on the right elbow. As the day continued the bite are became swollen and painful. The employee was admitted into the hospital. On August 10, 2015 a portion of the bite area was removed by doctors.",1
A worker was servicing a dock door that was out of track when he got his hand caught in the door cable.,1
An employee's foot was run over by a forklift after he stepped off of the lift resulting in a fractured fourth toe and broken pinky toe. The parking brake was not set on the lift. ,1
"One employee was hospitalized after a sample port on a sodium hydroxide line failed, showering the employee with sodium hydroxide at 190 degrees Fahrenheit. ",1
An employee installing conduit for primary underground wire was hospitalized for heat stress.,1
A crane maintenance employee doing a cable inspection slipped and fell approximately 40 feet. The employee was not wearing PFAS. ,1
The employee caught his arm between two trailer rear end frames while attempting to stop one from moving. He suffered a laceration and was admitted to the hospital. The laceration required surgery and there is nerve damage.,1
"On August 06, 2015, at approximately 9:15 p.m. the team member was setting-up draw machine #5 (Morgan) for a double draw job (7/32 rod to W2.1). The process is to place the first draw under the bull block and the second draw on the upper section of the bull block. The machine was in jog mode while performing the task. An employee had the wire set on the bottom (first draw) and he was in the process of stringing the second draw. The employee noticed that the first bottom wrap was not in place. The employee stopped jogging and shook the wire with his right hand to locate the first wrap in place. While on this task, the employee stepped on the jog pedal as the wire snapped pulling his fingers against the block. The tip of his right middle and ring fingers were amputated. Employee was taken to the hospital where he was treated and released.",1
Employees were taking down sections of a grain elevator when an employee fell breaking a wrist and foot.,1
"An employee was walking into a room. The materials he was carrying shifted and he tried to catch them.  The door slammed on his right index finger, amputating it from the nailbed.",0
"An employee was trying to combine a low/empty jug of chemicals into a fuller jug of Sani King chemicals, unaware that he was mixing acid and chlorine.  The resulting odor caused him to suffer respiratory issues and he was admitted to a hospital.",1
An employee was struck by a PIV and admitted to the hospital.,1
An employee was setting a fan unit into position on a foundation plate when his fingertip became pinched between the two surfaces resulting in a fingertip amputation without bone loss.,0
An employee was working in the HT Unit changing a filter. The employee was sprayed in the face with hot water that could have been 100 degrees Celsius. The employee was taken to the hospital and treated for first degree burns to his face and neck.,1
"A maintenance employee was chemically removing some walking lines from the floor of the overhaul area.  There was some paint thinner poured over the walking lines that were being removed.  The area was not quarantined off and the employee was walking across the area and slipped, fell, and broke his right ankle.",1
"An employee was replacing corrugated roofing material. While descending from the roof, the employee lost his balance/footing and fell onto a concrete surface. The employee suffered a fractured skull and swelling to the brain.",1
An employee operating a table saw came into contact with the saw blade causing a finger amputation.,0
"An employee was sanitizing a hospital room after a patient was discharged.  The employee slipped on cleaning solvent and landed on her left knee, breaking the knee cap.",1
"An employee was performing a voltage check on a 277 volt meter base on a transformer. The employee made contact with an energized conductor and the grounded enclosure, causing an arc flash. The employee received 2nd degree burns to the torso and abdomen. The employee was wearing arc rated clothing.",1
Two employees were injured when a trailer dolly fell from the overhead rail.  ,1
A metal pipe line was plugged and the injured employee was attempting to remove the plug when the rotary valve positioned nearby was actuating and caught the air line the employee was holding pulling the gloves the employee was wearing into the actuating valve. The employee suffered a partial amputation (bone loss) of the right hand pointer finger up to the first joint.,0
Employer reported that an employee showed symptoms of heat illness (or kidney function illness) and was evaluated and hospitalized with IV fluids.,1
"On 8/6/15, an employee fell in the kitchen.  Employee stated that he/she did not slip on anything and the floor was not wet.  The employee lost balance and fell.  The employee suffered a broken hip and a torn MCL in the right knee.",1
An employee rolled her ankle getting out of her car in the parking lot upon arriving to work fracturing it.,1
Employee was in the process of repositioning a vertical lift basket when his right pinky finger was contacted by a cable pulley. The employee went to the hospital were he was treated and released.,0
"An employee, working as a winder, was threading a spool of high grade fishing line and got the right index finger caught up in the line amputating the tip.",0
"On or about August 6, 2015 at approximately 8:16 am, a worker was cutting a piece of brick or cement when his saw got stuck.  Employee tried to remove the saw by pulling, when he was struck by it on the face.  Employee sustained cuts on the left side of his face near the mouth and jaw.",1
"On August 6, 2015, an employee was trimming scrap boards with a chop saw at the end of his shift. He activated the foot pedal while his hand was removing boards.  The saw amputated the tips of his middle and ring fingers.  He was transported to the hospital where the doctor removed a portion of the bone in order to close the wound.",0
An employee fainted due to the heat and fell sustaining head and rib injuries.,1
"An employee was inside the Line 25 cooler doing a clean-out to prepare for the next batch.  The machine was locked out, but the key was left in the lock and wasn't turned to the off position. Once the materials are loaded into this machine, it starts up again automatically if it has not been turned to the off position. He was caught in the machine and sustained extensive injuries to the right foot, burns to an arm and back and a possible broken neck.",1
"An employee was in the break room having water, stepped on ice, slipped, and fell.  She was hospitalized with a broken left leg.",1
An employee amputated the pointer and index fingertips while operating the Macbee 30 draw machine.,0
"Employee was hospitalized on August 7, 2015.  The employee complained of back injuries received from performing his work duties on August 6, 2015.",1
An employee fell approximately 15 off a ramp.,1
An employee was on a roof loading a blue tarp onto a forklift when he fell approximately 15 feet to the ground. ,1
An employee was admitted to the hospital and treated for carbon monoxide poisoning while working on a school renovation worksite.,1
"An employee pushed a cart through a doorway out of a walk-in oven.  The employee had his hands on the outside of the cart.  As the employee came around a corner, the cart cut the corner and pinched the employee's finger between the cart and the door jam.  The employee sustained an amputation to the tip of the left pinky finger.",0
"An employee sustained a serious leg injury while he was attempting to dismount a CAT paving machine. The employee was in the process of dismounting the  equipment, slipped and suffered a puncture to the knee from a bolt protruding on the machine. The employee was hospitalized and required surgery.",1
"An employee was assisting a visitor while standing on a curb. When he stepped off the curb, he rolled his ankle and fell onto the asphalt driveway, breaking his left femur.",1
"An employee lost his balance and fell while working on a 10 foot ladder, breaking his left elbow, right wrist, and lacerating his forehead.",1
An employee was operating a rip saw that jammed up. The employee ran another board through the rip saw that kicked back and struck the employee in his right hip resulting in a fracture.,1
An employee was hospitalized after inhaling smoke from an A/C unit that began smoking. The strong burning odor caused respiratory issues for the employee.,1
The employee was conducting welding operations and after 2 hours of welding the employee started showing signs of heat stress.,1
"The employee was cutting a sample valve using an unguarded grinder. There was a 6"" blade installed on a 4"" grinder. The employee cut his left index finger and shattered the bone.",1
An employee was operating a mower when he lost control. His right foot went under the deck and was struck by the blade resulting in lacerations and fractures.,1
"An employee was exiting the restroom with her right hand placed on the door jamb.  As she closed the door behind her, her right middle finger was amputated at the base of the fingernail bed or distal joint.",0
The employee was shutting a trailer door and fell approximately two feet between the dock and the truck breaking her leg.,1
An employee's fingers were crushed in a brake press while operating the large drain pan brake press in the drain pan area resulting in a left hand finger amputation.,1
An employee was operating a pallet jack and ran into a conveyer that fell on the injured employee's left leg.,1
An employee was pulling a magnet off a door when she fell backwards and broke her hip.,1
"On or about August 7, 2015, an employee fell more than 30 feet while removing trash from the roof edge.",1
An employee was working a piece of pre breaker when the pipe jammed.  The employee was cutting the pipe to release the jam when the safety gate struck the tip of the employee's third digit amputating the fingertip.,0
"An employee slipped, breaking his left shin, while working on a concrete floor that was covered with a plastic cover.",1
"While exiting an elevator, an employee tripped on weather stripping and fell to the ground resulting in injury to the head and spine requiring inpatient hospitalization.",1
An employee performing work in a confined space sustained an amputation of his left foot.,1
An employee was operating a Preform press (#1) when the pneumatic plate activated and severed the tip of the employee's finger.,1
An employee cleaned out a saw while the blade was still turning and the saw blade struck his fingers.,0
An employee working on a pedal operated resistance welder with no point-of-operation guarding received an amputation to the right hand index finger. The employee had a finger crushed between the electrodes.,0
"On Friday, August 7, 2015, an employee suffered the loss of the fingertip and nail with exposed bone while repairing a band saw. The screw shaft fell out of the head rig (the guide system on the band saw).",0
An employee received burns to the hands and right foot while working near overhead power lines approximately 17 ft.  from side structures. The employee was carrying a 24 ft. aluminum bull float that contacted the overhead power lines.,1
An employee was hospitalized due to a left index finger amputation.,1
An employee fractured the little finger when a piece broke off from a 1-inch steel plate.,1
"While unjamming boards on the planer mill, the employee had his third and fourth digit tips amputated on his right hand.",0
Employee was struck by a high pressure rigid line on a oil and gas production site and sustained non-life-threatening injuries.,1
"On Friday August 7, 2015, an employee was assaulted by a patient in a locked unit and admitted to the hospital.",1
The employee returned to the cement plant and was washing the back of the mixer truck with the cement hose.  The fold down ladder part fell down as the employee was rolling up the water hose striking the employee on the left hand and fracturing the left index finger.  The employee was taken to the hospital and admitted.,1
An employee amputated his left index fingertip including bone while repairing a metal punching machine. LOTO was not in place when the employee attempted to make the repair.,1
An employee was injured by a 40 foot tie rod that fell from a trackhoe excavator onto the employee's head and shoulders injuring two vertebrae in the neck and bruising the right shoulder.,1
A field inspector was struck by a DOT road sign when the strap holding the sign broke. The employee suffered a fractured right arm and a deep laceration to his right forearm including tendon damage.,1
"In the meat department, an employee was injured while using the band saw to cut beef.  The injury resulted in partial amputation of the left index finger. ",0
An employee fell off a ladder hitting his head on a concrete floor. The employee was hospitalized for a fractured skull and foot.,1
An employee was doing inventory in the Lawn and Garden area. A box fell and pushed her off a ladder. She fell three to four feet and fractured her knee.,1
An employee collapsed while pushing a shopping cart inside of the store.  The employee's head struck the ground causing bleeding and damage to the back of his skull.  Surgery was performed to relieve swelling.,1
An employee was struck by truck at the loading dock resulting in a broken pelvis.,1
A worker was travelling down a belted manlift in a grain silo.  The platform the worker was standing on shifted and the worker fell 15 feet to the concrete floor below.,1
An employee fell 15 feet off a walkway platform breaking his wrist and jaw resulting in hospitalization.,1
"An employee was using a food processor in the Trim Room of the Salad Bar Department to slice/cut raw broccoli for a pasta salad. A piece of broccoli become lodged in the processor. The employee used the right hand to clear the jam resulting in the amputation of the right index, middle, and pinky fingers.",0
"An employee was operating a diesel powered forklift to move cages off a truck. He exited the forklift and walked away to inspect the cages. Another employee entered the forklift to operate it, moved it forward, and struck and pinned the employee. The employee was struck on the right leg and hand. The employee suffered a right tib/fib fracture and right thumb and index finger fractures.",1
An employee suffered a soft tissue amputation to the left middle and ring fingers (distal) while operating a product wrapping machine.,0
An employee suffered a fingertip avulsion while working with a wrench.,0
An employee amputated the first joint of his left middle finger while performing maintenance on a lapper machine.,0
An employee was using needle nose pliers to close up the safety cable's compartment located underneath the right side of the aircraft by the aileron when he hurt the left side of his face and eye. The injured employee did not know what hit him. He was admitted to the hospital overnight for surgery.,1
A nurse was hospitalized with asthma symptoms after entering a room that had just been cleaned.,1
"On August 9, 2015, at 11:30 pm, an employee was climbing a 5 foot fixed ladder attached to the reprocessing line when the employee slipped and fell to the concrete floor.  The employee suffered two broken bones in the lower right leg and was hospitalized for surgery.",1
An employee was opening a by-pass valve while working from an A-frame ladder. When the ladder slipped the employee fell approximately four to five feet fracturing the right femur.,1
Employee slipped and fell in the bathroom and suffered a head injury and a broken jaw.,1
"An employee was taking off the access panel of the E Line Coagulation Tank to clean the excess solids out of it. As the employee was doing that the residuals (adjusted pH hot water 150-160 degrees Fahrenheit, liquid latex, and 93% sulfuric acid) splashed onto the employee.  The pH of the residuals was approximately 3.2. The employee received second degree burns down the right side of his body.  The employee was hospitalized.",1
"The employee was supervising the outbound dock. A PIT operator passed by her towing two over the road (OTR) containers. As the PIT passed, the door of one of the OTRs came open and hit another OTR that was staged near where the employee was standing. That OTR struck the employee causing her to fall to the floor and fracture her hip.",1
An employee was climbing a fixed ladder with a cage inside of a containment unit when she lost her footing and subsequently lost her hand grip and fell approximately eight feet breaking her right ankle. She had surgery to repair the damage to her ankle.,1
"An employee was performing maintenance on composer #1. After completing the maintenance task, the employee released the hood from the locked out position and engaged the pneumatics to lower the hood back into place via a lever system. Once this was done, the employee noticed a pair of pliers inside the machine. She placed her left hand on the edge of the machine and reached inside with her right hand to grab the pliers. At that time, the hood came down onto her hand, amputating her left pinky between the first and second knuckle.",0
An employee was working as a laborer guiding the forklift operator that was carrying a large piece of duct work when the material fell and struck the employee's right big toe.,0
"On August 06, 2015, an employee was bitten on the left middle finger by an unknown source, assumed to be a spider. On August 08, 2015, the employee showed the employer his swollen finger and was sent to a doctor for treatment. On August 09, 2015, the employee's left arm had begun to swell. The employee went to the emergency room and was admitted to the hospital on August 09, 2015.",1
An employee's finger was amputated while changing a coupling on a drive shaft. The finger was pinched between an indexer sprocket and the cell chain.,0
"A maintenance employee was working on a overhead crane from a ladder, installing a part.  The crane moved unexpectedly and the employee fell from the ladder fracturing his left leg.",1
"An employee climbed a ladder to put a chain on the trim press. On the way up the ladder, the employee opened the electrical box of the trim press to make sure nothing was wrong with the electrical box. He did not close the door of the electrical box after checking it, but continued up the ladder to replace the chain. On the way down the ladder, after he changed the chain, the employee grazed the electrical box with his shoulder, shocking him and causing him to fall approximately six feet.",1
An employee was walking across the trailer yard (between the dispatch office and the fleet garage) and was struck by the yard horse (a 5th wheel tractor used to move trailers). ,1
An employee was cleaning a deli meat slicer while the blade was still rotating and cut his finger on 8/8/15. The employee had surgery on 8/9/15.,1
Employees were moving pieces of rail into position with a backhoe to repair a section of damaged railroad. The injured employee was standing too close to another piece of railing when the backhoe operator set down another piece. His leg was pinched between the two pieces breaking it.,1
"On August 10, 2015, an employee suffered an injury to his right great (big) toe when a coil that was sitting upright on the floor fell on its side and onto the employee's foot while the employee attempted to spin the coil. The coil was being moved from storage to production. At this time the employee has been hospitalized and it is unknown if a partial amputation will occur.",1
An employee fell while stepping off a curb in the mall parking lot.,1
An employee operating a planer in the planer mill received lacerations to two fingers on the left hand and a laceration to the left forearm resulting in hospitalization. A board became jammed and the employee tried to push the board through the planner when he was grabbed by the rollers resulting in injury.,1
"An employee tripped while going down the stairs and fell down approximately 16 steps resulting in a separated shoulder, broken ribs, elbow and ankle.",1
"An employee was unloading an auto clave, stepped off of a concrete auto plate located outside of the work platform, and fell approximately 18 inches into a condensate drain. The drain contained hot water at a temperature of 170 degrees. The employee sustained second degree burns.",1
An employee was severely burned (first and second degree burns) on his thigh and genital area by a lancing rod while attempting to remove slag on the cupola system. The lancing rod dropped and ignited a flame burning the employee.,1
"An employee suffered a partial finger amputation while cleaning a machine drive belt. While jogging the machine, the cloth that the employee held pulled his hand into a pulley.",0
"An employee lost his balance while working from an eight foot ladder. The employee was about to fall and jumped off the ladder instead, breaking both legs.",1
"An employee was performing a fluid end replacement on a pump using an impact gun to remove pump suction manifold bolts. While loosening the bolts, the suction manifold fell ~6 inches catching employee's arms between the suction manifold and trail fender resulting in a contusion injury. The header weighs approximately 250-300 pounds.",1
An employee was changing a tractor tire in the field on 8/10/2015 when the tractor wheel and tire tipped over onto the employee breaking the radius and ulna in his left forearm.,1
An employee was using an emery cloth to hand polishing a part being rotated by a manual horizontal lathe. The cloth was caught by the rotating part which pulled the employee's arm into the machine.,1
An employee was chopping lettuce in the kitchen with a kitchen knife and amputated the tip of his left thumb.,0
A bladder assembly fell approximately 1 foot off the tip of a forklift and pinned an employee's left hand between the assembly and the press frame. The employee was hospitalized overnight for broken bones in the left hand.,1
"An employee was using a Skilsaw to cut a post. The saw, which was guarded, kicked back and amputated the pinky, ring, and middle fingers of the employee's right hand.",0
On 8/10/15 a temporary employee operating a stand up fork truck was involved in an accident that resulted in a injury to the left hand requiring hospitalization.,1
An employee was working in a winding station and applying tape to a cardboard core (on a rotating spindle). The employee's gloved hand made contact with the double sided tape pulling her arm into the spindle. The employee sustained multiple fractures to the arm and ribs resulting in hospitalization.,1
"An employee was working at the yard and was overcome by the heat. The employee suffered a heat illness, broken nose, and a laceration to his head.",1
An employee suffered a broken arm while jumping a fence on a residential property.,1
An employee was performing maintenance on a crane. He removed a pin that retained the dead end of the wire rope.  His finger entered the hole where the pin was and the rope shifted causing an amputation of his right index fingertip.,0
Employee contacted energized electrical wire. The breaker was not shut off at the time. The employee sustained an electrical shock resulting in hospitalization.,1
"The employee showed up to work at 6:00 am.  At 6:15 am, the employee began sweating profusely.  The employee was placed on light duty and worked until approximately 2:30 pm. The employee was admitted to the hospital for dehydration at 7:00 pm.",1
The employee was operating a front end loader moving dirt.  The employee hit a pile of dirt and came to an immediate stop causing the door to slam on his left index fingertip.,0
An employee grabbed a metal frame from the floor and cut his right thumb. The employee was hospitalized for surgery on the thumb's tendon.,1
"During pipeline construction and while stringing pipe, a track hoe operator was unloading pipe from a delivery truck when an employee walked behind the track hoe on the operator's blind side. The track hoe backed up onto the employee's left foot amputating it.",0
An employee stood up at her desk and tripped hitting her head on the right side of the desk and fracturing her femur as a result of the fall.  The employee was hospitalized.,1
A worker fell off an A-frame ladder into an adjacent elevator pit.,1
An employee was seriously injured after his arm was caught in a bulk palletizer machine in the finishing department.  The employee was hospitalized with multiple broken bones in the left arm and blood loss.,1
An employee was on a ladder hanging aerial service wire and was admitted to the hospital for heat related injuries.,1
An employee suffered a finger laceration on 7/29/2015 while cutting cheese with a cheese grater. The laceration became infected and on 8/11/15 the left index finger was partially amputated at the knuckle.,0
"On or about August 11, 2015, an employee operating a meat band saw amputated the right index finger.",1
The employee was operating a forklift and hit a steel beam.  The employee's head struck the steel beam resulting in a fractured skull.,1
A forklift operator experienced severe dehydration and was hospitalized.,1
"An employee was repairing the head stretcher on P2. The employee had electrical LOTO and one air hose removed. While connecting the second air hose, the shaft moved and amputated his left pinky finger down to the knuckle closest to the hand.",0
An employee was moving brush using a winch and caught a finger in the winch.,1
"The employee was delivering packages and began to feel nauseous. He went to the cool zone, but was not able to cool down. He was hospitalized for heat exhaustion.",1
An employee's hand was injured while using a porta power hand held hydraulic press to change bushings on a truck. The employee's hand was pinched between the porta power and the truck frame.,1
An industrial power washer exploded sending an employee to the hospital for a fractured skull.,1
An employee was cleaning crumbs/crust from a catwalk and got her right hand caught in an unguarded chain and sprocket conveyor.  Her right hand was amputated during surgery.,0
"An employee was standing in front of a forklift . A tote that was sitting on the forks came off and hit the employee, breaking his lower right leg.",1
An employee was struck in the shoulder by a falling piece of rebar breaking the collarbone. The rebar was ~42 feet long and weighed ~108 pounds. The rebar was being manually placed in a storage rack when it slipped and struck the employee.,1
An orange peel was left in a trash can.  An employee who was allergic to citrus came into contact with the orange peel and subsequently went into anaphylactic shock.,1
An employee was adjusting a belt on an energized conveyor with a wrench. The employee's hand slipped making contact and becoming entangled with the conveyor fracturing bones in his hand that required surgery.,1
An employee was injured in an silo explosion.,1
An employee was repairing a riding lawn mower positioned on a jack. The jack failed while the employee was under it cutting and crushing the employee's head.  The employee was transported to hospital and admitted for treatment.,1
"A cold saw operator received an amputation to his right pinky fingertip (distal phalanx fracture). He placed a brass bar on top of the machine.  The bar was grabbed by the saw blade and pulled into the machine. The employee grabbed the end of the bar to pull it out while the machine was running, pinching his finger between the bar and a vise.",0
"On 8/11/15, an employee was welding in a training booth when he began sweating heavily.  He was later hospitalized for heat exhaustion.",1
"An employee was finishing up repairs to the 4DC Up Elevator. The employee proceeded to pull slack out of the drive chain.  After cleaning the teeth of the sprocket, the weight of the chain pinched the employee's finger between the chain and a sprocket resulting in the amputation of 3/8 inch of the tip of the left right finger. LOTO was used.",0
On 8/11/15 a rural mail carrier vehicle was struck by a township road work truck while delivering mail near an active construction zone. The employee sustained cervical and lumbar strain injuries requiring hospitalization.,1
"On 8/10/15, an employee was sprayed with sulfuric acid while transferring acid from a railcar. ",1
"While adjusting the die on press brake #2524, an employee placed his fingers over the die. The back-gauge/positioner moved and caught the employee's finger between the die and the back-gauge/positioner.  ",0
The employee was on the third floor looking for access to the attic. The employee was looking up and stepped into the elevator shaft falling about 28 feet.,1
An employee was walking alongside a motorized aerial lift machine on unstable ground. The lift's tires sank into the ground causing it to tip over and strike the employee's left hand fracturing the wrist.,1
An employee fractured a femur while parachuting into a wild fire.,1
An employee suffered a hernia while moving appliances. ,1
An employee was hospitalized for a foot injury after a wheel loader ran over his foot.,1
An employee had his fingertip amputated when his glove was caught in a chain.,0
An employee's fingertip was amputated after it got caught by the hold-downs on a shear.,0
"During a training session, an employee hit a container and jumped off a standing toe buggy. The employee's ankle was caught between a cart and the toe buggy fracturing it.",1
An employee was folding a box and the lid flipped up causing her to fall backwards. She used her hand to catch her fall and fractured the left wrist.,1
An employee was on a ladder conducting telephone cable maintenance with the ladder resting against the telephone pole. The telephone cable broke and the employee fell 23 feet onto the concrete below resulting in broken ribs.,1
An employee had the tips of two fingers amputated when a sheet of steel fell on his left hand as he was feeding a roll former.,0
"An employee fell approximately 4 feet while descending a 6 foot portable ladder stand. The employee got a leg caught during the fall and fractured it, requiring hospitalization and surgery.",1
An employee was stepping onto a forklift with his left foot when his foot slipped off the forklift. The employee twisted his ankle breaking it and his foot as he fell to the floor.,1
"An employee received an electric shock while working on an air scrubber also known as a ""smog hog."" The employee was hospitalized for a night and received medical treatment.",1
An employee was working from a ladder putting up the angle iron at the garage door of a new home when the angle iron fell and struck the hose used for the spray painting operation performed by a different contractor on site. The employee came down off the ladder and attempted to stop the leaking paint which resulted in a laceration and latex paint being injected into his hand.,1
An employee was operating an engine lathe and was pulled into the lathe.,1
"An employee was putting the rear gate on the state body truck when he turned and fell approximately 3-4 feet off the bed of the truck breaking his left hip and sustaining lacerations to his side, arm and leg.",1
"On August 12, 2015, an employee suffered an amputation while performing a die change on a power press. ",0
"An employee was operating a press brake and caught his right hand in the die. His index fingertip (from nail base) was amputated, his two middle fingers were amputated from the main knuckle and re-attached, and his small finger was crushed and may be amputated.",1
An employee suffered an open fracture to the left foot when a coworker moved a pick car onto the employee's foot.,1
The employee stood on a pallet to look over a privacy fence. The pallet shifted and he fell off landing on his back and suffering a fracture in the lumbar region.,1
Two forklifts were backing up and collided.  One employee was taken to the ER with a back injury and was admitted.,1
"An employee was climbing the newly installed wooden power line pole to help another employee who was working out of the aerial lift bucket move the 4800 V power line from the old wooden power line pole to the new one.  In the process, the injured employee contacted the live 4800v power line on the top of his right shoulder.  

The poles are approximately 45 feet long but once installed they are 35 feet high because 10 feet are in the ground.",1
"As an employee was moving a B-pillar to the rack by hand, a second employee was moving a B-pillar off the line by hand and struck the first employee in the arm causing a laceration to the left bicep.",1
"An employee was stacking boxes on a pallet. The employee struck his leg on a box containing product. After a half hour, the employee's leg began to swell and he was taken to the hospital. The employee was diagnosed as having a blood clot and was hospitalized overnight. The employee had surgery the next day.",1
Two employees were preparing to load luggage onto a plane with a belt loader. When one of the employees turned the loader on it malfunctioned. The loader jumped forward smashing the other employee between the loader and the plane resulting in fractured ribs and a jaw fracture in two places.,1
An employee was moving a piece of switch gear in the electrical building when it tipped and pinched his finger between the switch gear and the floor.,0
An employee received 2nd degree burns on 27% of his body from contact with hot water when his safety vest caught a valve handle that opened while inspecting a heat exchanger.,1
"An employee fell off the back of a local delivery truck and broke his ankle, requiring surgery. ",1
An employee had a finger crushed and later amputated.,0
An employee fell and was hospitalized.,1
On 8/12/2015 an employee who was delivering pavement stones suffered a fractured jaw. The industrial truck that he was operating tipped over while handling a load. The employee was wearing a seat belt and upon the forklift making side impact with the ground the employee suffered a fractured jaw. He was admitted to the hospital for surgery.,1
An employee was filling up the tire of a combine with an air compressor. The tire exploded and threw the employee approximately 16 feet onto the concrete floor.  The employee sustained three broken ribs.,1
"An employee finished installing switches. While cleaning up and removing the rubber cover up used to protect from inadvertent contact, he touched the wire with more than 50 volts, resulting in 1st, 2nd, and 3rd degree burns to both arms.",1
An employee was cleaning the blades of a lawn mower. The mower jumped and severed four fingers on his left hand.,0
"On or about August 12, 2015, an employee fell/collapsed within the break room area and received a hip injury that resulted in hospitalization and surgery.",1
An employee was attempting to repair a chain conveyor that pulls fence posts from one area of the facility to another. The employee used the emergency stop to shut the conveyor down. The machine wasn't locked out and tagged. At some point another employee turned the conveyor back on while the maintenance employee still had his hand on the conveyor chain. The employee lost his whole middle finger and the tip of his left pointer finger.,0
An employee working in the elevator shaft suffered a laceration to his elbow when the elevator suddenly moved and the employee's elbow came into contact with a metal bracket in the shaft.,1
An employee was replacing a flat tire on a flat-bed trailer when the jack supporting the trailer slipped. The trailer's fender came down on his left thumb-tip.,1
"On 8/12/15, a temporary worker sustained an amputation of the tip of his right middle finger while operating a table saw.",0
An employee was picking up trash in the parking lot when her knee gave out and she fell fracturing the left leg in two places and dislocating the ankle.,1
An employee stood in a 32 inch deep trench with 24 inch concrete pipe while directing the heavy equipment operator. The employee was caught between the equipment bucket that was cleaning out dirt and the pipe.,1
The employee was walking down the corridor near the break room when her shoe caught on the floor causing her to fall and break her left hip.  There was no carpet on the floor or anything else to contribute to the fall.,1
An employee was wiring field mass meters by the flare when he started feeling the effects of heat related illness. The employee was working with another employee at the time of the incident.  The paramedics were called and the employee was transported to the hospital.,1
An employee lost control of the brake handle during rig down operations and it struck him in the jaw.,1
A crew was trimming tree limbs away from power lines. An employee got too close to the power lines and the current arced from the wire onto the employee whose shirt caught fire and burned his back.,1
An employee was standing on a ladder 16' from the ground.  He reached to the left to drill into the side of the house and the ladder fell to the right.,1
A forklift driver was driving a forklift and dropped his clipboard onto the floor.  He attempted to pick up the clipboard and as he leaned over the side of the lift he struck his head on a pole.,1
An employee suffered a fingertip amputation to the left middle finger while performing maintenance on a Bobcat.,0
A tow truck hook broke off the tow truck and struck a passing employee on the side breaking ribs and bruising the shoulder.,1
A greeter tripped on a rug and fell resulting in a left hip fracture.,1
"The employee was in a front end loader attempting to lift a railroad tie.  She lost her grip on the railroad tie and it fell striking her right hand, middle finger on the bucket blade. Her right middle fingertip was amputated.",0
The employee was struck by a pulley system buckle that snapped and struck his leg. The injury required inpatient hospitalization and surgery.,1
"An employee was getting into the side of a company van to sit on the floor to go to lunch. The employee touched a conduit that was stacked in the van, causing it to shift onto his hand and amputate his right index fingertip.",0
"An employee was climbing the stairs leading into a customer's mobile home to deliver a mattress set. The employee tripped and fell, breaking the right hip.",1
"Two employees were moving a pallet with a manual pallet jack when a piece of the wooden pallet broke. While one of the employee's reached down to grab the piece of wood, the other employee lowered the pallet catching the injured employee's left middle finger. The left middle fingertip was amputated and surgically reattached.",0
"An employee was stacking pieces of granite about 4-feet high when the stack became top heavy and fell, crushing his left foot.",1
"On 8/13/15, an employee was operating a spooling machine when their left-hand glove got caught on a cable and was drawn into an in-running roller nip point. The employee's left ring fingertip was amputated.",0
"While conducting a routine valve cleaning operation, the employee inserted his finger into the valve body then activated the valve causing the ball valve to sever the tip of his finger.",1
"An employee was scalded on the face, chest, and legs by steam and juice.",1
"On or about August 13, 2015, an employee was struck by a forklift in the warehouse. The forklift crushed the employee's foot and ankle.",1
"An employee was walking around equipment to lock it out when he tripped on the bottom of a guardrail and fell into the guardrail post, fracturing his ribs and puncturing a lung.",1
"On August 13, 2015, at 2:30 p.m., an employee was cutting tree branches from a ladder while using a chain saw. The employee fell from the ladder and suffered multiple injuries to the hands, as well as broken ribs.  The employee was hospitalized for treatment.",1
An employee reached into an open trench to straighten some conduit and was bitten on the left-hand finger by a venomous snake.,1
"An employee was working the night shift on the PA Turnpike, moving traffic signs for the blacktopping crew. The employee climbed over the jersey barrier where a bridge was demolished so he could retrieve personal items. The employee fell approximately 15 feet off the bridge onto Meetinghouse Road, fracturing the foot and ankle.",1
An employee's right-hand pinky fingertip was amputated while working on a screw conveyor.,1
"On or about August 13, 2015, an employee was painting an elevator door. She got the door key to open the door. As she pushed the heavy door, it opened, and she fell 20 to 25 feet to the bottom of the elevator shaft, suffering sprains and strains. No fall protection or lockout protection was used at the time.",1
"An employee was cleaning the ravioli former when the machine started unexpectedly. His right hand got caught in the paddles, and half of his ring finger was crushed.",1
"On 8/13/2015, at approximately 10:00 a.m., an employee was installing electrical insulation on powerlines when a pin broke as he was coming down inside the bucket of a boom truck. He fell and hit the ground while still inside the bucket, breaking his ribs and injuring his right ankle.",1
"On August 13, 2015, an employee was operating an overhead crane to move a steel beam that was approximately 4' by 15' and weighed 4,000 pounds. The beam was sitting in the I position and the employee was using beam clamps to move the beam to horses. The employee's right middle finger got caught between the beam clamp and the beam flange. The top portion of the employee's finger was sheared and had to be surgically amputated.",1
An employee suffered heat exhaustion while prepping a boat for painting. He was hospitalized overnight.,1
"Employee was cutting grass on right side of road edge with a weed whacker. A vehicle that was merging onto the parkway struck the employee on the right side. The employee suffered injuries to his right elbow, right shoulder and head. ",1
"An employee was bringing a steel plate down onto a pillow block. While he was adjusting a piece of sheet metal, the block turned and pinched his finger between the block and plate, amputating his left index fingertip (part of nail).",0
An employee was hospitalized after an electrical flash occurred during an operation to change a wooden beam to a concrete beam.,1
"A maintenance mechanic was drilling into a conveyor roller and a chromate chemical sealer sprayed out, ignited, and burned his face and arms. He was wearing safety glasses and was admitted to the hospital for 2nd and 3rd degree burns.",1
"An employee was run over and suffered a fractured pelvis, collapsed lung, and collapsed bladder.",1
"An employee climbed a tree and tied off during tree trimming activities. The employee cut a limb, which fell and broke the limb he was tied off onto. He fell approximately 40 feet to the ground, suffering a fractured skull, a blood spot on the brain, and fractured bones around his right ear. He was hospitalized.",1
An employee's left ring finger was amputated while running wood through a table saw.,0
An employee was cleaning up debris on a riverbank when a splinter entered his left hand. The hand became infected and required hospitalization.,1
An employee was operating a bulldozer to unload it off a trailer onto a dirt shoulder. The bulldozer rolled onto its side and struck the employee. The employee suffered a skull fracture.,1
Employees working on a roof took an extension ladder apart. The piece with the feet was being used on the roof to access another portion of the building while the other piece of the ladder was being used on the ground. The piece of the ladder being used on the ground was not tied off and fell when an employee used it. The employee broke his leg and was hospitalized.,1
An employee was hospitalized with broken ribs after falling approximately 18 feet off an unguarded area of the cat walk. The employee was on the walkway to unjam equipment.,1
"An employee was brushing plastic shavings to one end inside the CNC machine so that the shavings could be removed. The auger inside the machine started, and the employee's hand came into contact with the auger, breaking bones.",1
"An employee was operating a drill press with a gloved hand, which got entangled in the drill bit. His left little finger was amputated.",1
"An employee was lifting metal pallets when a metal pallet slipped out of his hand and crushed his right hand middle finger, breaking it.",0
An employee fell 35 feet while installing metal decking.,1
An employee performing inspections suffered heat stress and was hospitalized for dehydration.,1
"An employee was acting as a spotter for a trenching site. The trenching machine grabbed a piece of form board, which hit and crushed the employee's ankle.",1
"An employee's leg fell asleep while riding in a passenger van.  When he stood up, he fell down and broke his right fibula.",1
An employee was hospitalized with a heat-related illness.,1
An employee was walking near the CNC router when his leg got caught between a moving table and the base of the router. He was hospitalized.,1
An employee was cleaning an electrical component in a de-energized substation. Another crew was providing power to an electrical pump motor. The alternate power was from another substation and energy source. A closed switched allowed the electricity to flow back to where the injured employee was working.,1
"An employee was outside behind the store removing toy freight from a storage container. The storage container door was open at the time. A gust of wind blew the door shut on the employee's ankle, giving him a large gash. His Achilles tendon was severed, requiring surgery.",1
An employee's hand got caught and severed in a shear machine while cutting fence posts.,1
"After completing a round of deliveries, an employee experienced heat exhaustion and was hospitalized.",1
"An employee working in the Unicor Prison Industry furniture factory walked backwards and tripped over a pallet, breaking his leg. He was hospitalized.",1
"An employee was transferring packages from a pallet to a trailer using a pallet jack. While loading the packages, he stated he ""felt something wrong.""  He required surgery for a hernia.",1
"Rice was not coming down to the bran remover from the auger/conveyor above. An employee removed the round plate from the square round pipe and stuck his arm inside, feeling for the cause of the choke. His hand contacted the rotating screw auger/conveyor above. He suffered an amputation of his right hand up to and including the mid-point of his ulna and the radius of his right forearm. He was hospitalized for surgery.",1
An employee driving a forklift was thrown from it. The employee's foot was crushed by the forklift.,1
"An employee was adding oil to the extruder. The auger, which was still turning, caught and amputated the employee's thumb tip. The extruder was not locked out at the time of the incident.",1
"An employee was putting foam beneath a die cutter machine when the machine came down, crushing and amputating his left index finger.",0
"The injured employee was working as part of a three-person crew. The crew was removing and disassembling a bin-whip used to unclog a bin. As the bin-whip is raised, a 4-foot section is removed and the remaining part is reattached to the hydraulics used to raise it. 

Another crew member struggled to insert a pin to attach the hydraulics to the bin-whip. The injured employee reached over to help insert the pin and bumped the hydraulic controls with his knee. This caused the pin to rotate and pinch the injured employee's right index finger between the pin and the bin-whip housing. His finger was amputated.",0
"An employee was training a coworker in the processing division when he noticed something caught in an overhead conveyor. When he went to remove it, his glove got caught in the conveyor, twisting his right wrist and injuring his extensor tendon.",1
"On August 13, 2015, at about 5:30 p.m., an employee was operating a center rider (forklift) to pick up a pallet with his left hand outside of the forklift. He smashed his left-hand little finger against a bollard pole at the warehouse. His fingertip was surgically amputated.",0
An employee's finger was lacerated while working with a saw. He was hospitalized.,1
"An employee had connected a flux car for unloading. The previous car that unloaded into this line had oil with some residual water. When the flux (a tar-like substance) made contact with the water, it expanded and contacted the employee as he exited the railcar, causing first and second degree thermal burns.",1
"While working on Rollstock equipment, three of an employee's right-hand fingers were amputated in the machine.",0
An employee was cutting a piece of flat bar stock using an ironworker machine. The machine's hold down jaws caught and amputated the employee's left middle fingertip.,0
"An employee was disconnecting an attachment from the boom of an excavator for a transmission crew. When the connecting pin was removed, the 100-pound auger motor he was working on fell and crushed the end of his left pinky finger. He suffered an amputation of the distal end/joint of that finger.",0
"On 08/14/15, at 06:15 a.m., an employee tried to unjam a press. The machine was still running at the time and it cycled, partially amputating the employee's left middle finger.",1
"An employee was using an impact tool to tighten lug nuts on a truck wheel when the truck fell, pinning his hand between the truck frame and the impact tool. His left middle finger was amputated.",0
"An employee was loading empty water bottles onto a truck using a dolly. A bus hit the dolly, which then struck the employee and fractured his collarbone.",1
An employee's finger was partially amputated after getting caught between a wood part and work table while feeding parts into a gusset machine.  ,0
"An employee was fishing coax wiring through a drop ceiling from a 4-foot, A-frame step ladder. The employee fell from the ladder and struck his head, causing a laceration to the back of his head, bleeding on the brain, and a concussion. He required staples to close the laceration.",1
An employee was creating a new chemical inside a fume hood when the beaker exploded. The employee received multiple lacerations to the face from the beaker glass.,1
"An employee driving a walkie ran into a stock picker in an aisle. The employee's left leg and ankle were injured, requiring surgery.",1
"An employee was connecting a concrete form that was 29 inches high x 30 feet long. The form was being stored on the ground horizontally. Before the employee could get the form connected to the overhead gantry crane, the form fell 
over and injured the employee's right leg, causing a distal fracture to the right femur.",1
"An employee inserted an Allen key into the soft step adjuster of a lip groover to adjust the machine's tension. His left pinky finger was positioned near the machine shaft and shaft housing. The work cell was not de-energized at the time. As he was making the adjustment, the machine cycled, pulling the shaft into the housing and amputating approximately half of his left pinky finger.",0
"On August 14, 2015, an employee's left index finger got caught in the point of operation of a mechanical power press. The distal tip of his finger was surgically amputated (above the first joint).",0
"An employee was doing a roll-up on the belt slitter machine when the belt buckled after he cut it. He turned away from the machine to get a stick to flatten the belt and slipped off the wooden box that he was standing on. While trying to catch his balance, he put his right hand down on the belt going under the roller. He turned the machine off, which caused the roller to drop and crush his right forearm.",1
"On Friday, August 14, 2015, an employee was bracing a dump truck tailgate. When he removed the pins, he lost his balance and the tailgate fell over and crushed his big toe on the right foot. The toe was surgically amputated.",1
"An employee fell backwards (5 to 6 feet) off a ladder on 8/14/15, breaking the tibia to the right knee.",1
"An employee was tearing down an office wall while standing on a rafter using a pry bar and hammer. The employee lost his footing and fell approximately 9 feet to the lower ground level, breaking his right arm and wrist and injuring his right elbow. He was hospitalized.",1
"An employee was running a compound liner machine when she saw a cover that she thought she had to align. She placed her hand on the machine, which was running, and her right hand/glove was pinched between the stacker plate. She pulled her hand out of the glove and her middle fingertip was amputated.",1
"An employee was driving a forklift up a ramp to the truck scale when he drove off the ramp, fell off the forklift, and broke his leg.",1
"An employee working at the service desk tripped over an object and fell to the ground, hitting their upper left arm and sustaining a possible fracture.",1
"On Saturday, August 15, 2015, at approximately 2:00 p.m., an employee was operating a forklift at a roofing project jobsite. He was reversing the forklift when he made a sharp 90-degree turn with the boom extended, causing the forklift to overturn. He sustained injuries to his toes on the right foot and was hospitalized.",1
"An employee was attempting to loosen the pin so that he could adjust the tandem wheels under the back of his 53-foot semi-trailer for loading/unloading. An air line failed or an air spring (ballast) burst, suddenly dropping the trailer down and pinning the employee's arm between the top of the tire and bottom of the trailer frame. His arm was crushed and lacerated.",1
"Two employees were working on the well head to bleed pressure off a tank so that ethylene glycol could be added. The sight glass on the tank exploded and struck one of the employees in the face, causing a severe facial laceration and requiring surgery.",1
An employee's finger was amputated while removing the sample port from a blender during cleaning activities. The blender was running at the time.,0
"An employee was struck by an object that swung while it was rigged to a forklift, suffering a possible spinal fracture.",1
An employee was trying to unjam a staple gun when the staple gun activated and shot a staple into his hand. He was hospitalized.,1
"An employee was changing the teeth on a saw when the chain used in the lockout/tagout procedure broke, allowing the saw blade to fall and strike the employee's head and knocking him out.  He fell about 2 feet and broke his right leg. He was hospitalized and had surgery.",1
"An employee was raising the flag outside of the post office. Two dogs attacked him, causing lacerations on both forearms, knees, and calves. He was hospitalized.",1
"On 8-15-15, at 1330, an employee working in the seafood department received a puncture wound in her right index finger from a yellow tail snapper fin bone while scaling the fish. She was hospitalized.",1
An employee fell 18 feet through an open hole on a 1/4 x 12 pitch roof while monitoring employees installing a standing seam metal roof. The employee sustained head lacerations and fractures to the skull and face.,1
"Two employees were delivering furniture to a private residence. One of the employees was inside the residence while the other stayed in the truck. The employee inside the truck slipped on a piece of plastic while moving a dresser, and the dresser fell on and fractured his right ankle.",1
An employee suffered a hernia when lifting a bag of linen from a bin.,1
An employee was pinned against the fuselage of an MD-80 when the jack that he was using to change a tire failed.,1
"An employee was operating a plate forming press when his right hand got caught between the plate press. Three right-hand fingers (index, middle, and ring fingers) were lacerated, and the employee was hospitalized.",1
"On 08/16/2015, an employee was installing highway drainage pipes inside an excavation. A slab of asphalt that was next to the pipe trench broke loose and slid into the excavation, catching his fingers between the slab and the trench bottom. His left index finger at the knuckle and left thumb at the first joint were fully amputated at the hospital.",1
"On 8-16-2015, at about 1750 p.m., an employee was working at the special services return desk when a can of red mahogany Minwax spilled. The vapors caused the employee to have difficulty breathing and triggered an asthma attack. She was hospitalized.",1
"Molten lead from recycled batteries erupted from a kettle, causing second degree burns to an employee's right arm. An aluminized suit was not worn at the time of the incident.",1
"An employee tripped and fell while getting coffee from the cafeteria, resulting in a fractured shoulder and pelvis.",1
"When an employee made a turn while operating a forklift, the forklift got too close to the wall and caught the employee's finger between the forklift and a hydraulic pipe along the wall. The employee's finger was amputated.",0
An employee was installing a pump during the fracking process when he felt lightheaded and began vomiting. He started having heat cramps and was hospitalized after suffering severe dehydration while operating equipment outside with temperatures of 105F.,1
An employee had been working outside moving baggage and was found passed out in the break room. The employee was hospitalized for extreme dehydration that caused kidney failure.,1
An employee tripped and fell down the stairs in the dock area. The employee was found unconscious at the bottom of the stairs.,1
An employee was hospitalized with a lower back strain/groin strain after welding small parts.,1
An employee's left thumb got pinched in the stamping die of a punch press. The employee was hospitalized for surgery.,1
"An employee was installing the wood truss of a roof when the truss moved, causing the employee to lose balance and fall approximately 10 feet to the floor. The employee broke both wrists and ribs on the left side. A fall protection system was not used at the time.",1
An employee demolishing a kiosk sustained a cut on the right forearm while removing a plank that had a veneer/laminated cover.,1
"An employee was packing bags of baked snacks into shipping boxes. While moving from the packing area to another section of the plant, the employee went under a portable conveyor and pulled it down while trying to support their weight. The conveyor belt fell onto the employee, lacerating the head and arm and requiring arterial cauterization.",1
"On August 17, 2015, at approximately 11:30 a.m., an employee was injured while assisting a customer with a riding lawnmower positioned on a display. The employee was lowering the display to retrieve the lawnmower.  The display did not operate properly, so the employee lifted up on it to break it loose. The display and lawnmower fell and pinned the employee's left hand between the equipment and the ground, amputating one fingertip and fracturing three fingers.",0
"An employee was walking on the property. When the employer opened the metal gate, it came off its roller and struck the employee, breaking several vertebrae in his back.",1
"An employee was injured while working from a scissor lift installing a metal corrugated steel panel on a wall. The employee was removing an angle iron on an overhead door that was connected to the overhead door spring. As the final bolt was removed, the spring's tension was released, causing the angle iron to repeatedly strike the employee's left hand. The employee sustained fractured bones and severed tendons in the left hand.",1
An employee was cleaning gutters at a client's home when he fell approximately 10 feet off a ladder to the ground. He was hospitalized with a broken right wrist.,1
An employee was painting a traffic light pole at an intersection when a semi truck struck the bucket truck he was working in. He was ejected from the bucket onto the pavement and was hospitalized with multiple skull fractures.,1
An employee was preparing to operate a motorized roof tear off machine. The machine got stuck in reverse. The employee held on to the machine as it continued reversing. Both the employee and the machine fell off of the roof. The employee sustained bruised ribs and shoulders.,1
"An employee on a ladder was drilling holes in the wall to run fiber optic wire for a breakroom television monitor. As he tried to pull the wire through the hole, the ladder slipped out from under him and slid down the wall it was leaning on. He landed on the ladder and the floor, fracturing his right femur.",1
An employee drove a golf cart into the pond and dislocated their shoulder.,1
"An employee was delivering milk.  While he was unloading the milk case with a coworker, the case slipped out of his hand and landed on his leg, crushing his tibia. He was hospitalized and required surgery.",1
"An employee had finished repairing the scraper and was pulling in the outriggers on his work truck. As he pulled up the outriggers, the truck rolled backwards and pinned him between the scraper and truck, breaking his back.",1
"An employee was helping to prepare an electrical transformer for shipment to a customer's location. The transformer was moved to a pallet. When a forklift approached the pallet to pick it up, the transformer began to lean and then fall toward the ground. The employee, in an attempt to stop the 1,200-pound transformer from falling, reached out his left arm, which was then crushed between the transformer and the work table. He fractured his left forearm (ulnar and radius) and all five digits on his left hand.",1
"An employee was releasing cargo chains tied around an excavator in a cargo hold on level 1 of the vessel. During that time, some of the latch hooks on the chains became wedged and would not budge. A coworker used a pry bar to help release the chains. The coworker pulled on the pry bar, which slipped from the coworker's grasp and flew towards the injured employee. The pry bar struck the injured employee in the head, requiring hospitalization.",1
"An employee was on the ground, lining up a load for a flatbed truck. The employee had placed dunnage on the tire and moved it right as the load was put in place. This caused the trailer to level out and catch his finger between the dunnage and the trailer frame. He sustained a partial fingertip amputation, no bone, to the fourth left-hand digit.",0
An employee was putting auto parts in the grinding machine when his index fingertip was amputated.,0
"On 08/17/15, an employee experienced cramping while tagging equipment. He later experienced dizziness and vomiting. He was hospitalized for dehydration leading to heat stress.",1
"An employee was making adjustments to a vise on a cold saw machine when the vise clamped down on the employee's left hand, fracturing two fingers and partially amputating the index finger.",1
"An employee was building a pallet and was bent over putting in the last nail. As he stood up, the nail gun trigger was still depressed and shot a nail into his ankle.",1
An employee was walking from the bathroom in an area where a bucket loader was operating. The loader struck and broke the employee's right leg while it was backing up.,1
"An employee stepped from a semi-truck onto a curb that was 7"" high. His ankle gave out and he fell to the ground on his right hip. He sustained a compression fracture of the L2 vertebra.",1
"An employee was sanding a pipe on a training lathe while wearing gloves. The employee's right glove got caught on the pipe and was drawn into the turning pipe, amputating part of his right thumb tip. He was hospitalized.",0
An employee was using a forklift to receive trim from an upper shelf. The unbalanced load caused the forklift to tip over. The employee's right leg was fractured by the lift's mast when the employee tried to exit the forklift as it was tipping.,1
An employee was lowering a crane wheel using a crane when his finger got caught between the crane wheel and the steel rope. His right ring fingertip was amputated.,0
"An employee was moving the couplings from a pressurized line. The line flew back, hitting and injuring the employee's eye. The employee was wearing safety glasses at the time.",1
"An employee was carrying heavy metal pans when he dropped them on his foot, damaging his pinky toe. The toe was surgically amputated at the hospital.",1
An employee masking an aircraft using a boom lift fell approximately 10 feet to the ground when he exited the lift. He was hospitalized for a broken back and bleeding in the brain. Fall protection was not worn at the time of the incident.,1
A maintenance employee fell through the roof of a paint booth he was disassembling when the roof bowed.,1
"While performing maintenance on a punch press machine, an employee's right-hand middle finger got caught in a rotating wheel and was amputated.",0
"An employee was spreading decking when he fell approximately 16 feet to the ground below. He was hospitalized overnight with a possible broken arm and fractured jaw, requiring surgery.",1
"On 8-18-2015, at about 8:40 a.m., three employees were de-energizing and locking out a 480 VAC circuit breaker. The breaker did not open properly. When the cubicle door was opened, an arc flash occurred, injuring the first employee with 2nd and 3rd degree burns to his face, arm, and chest. Another employee had no injuries, and the last suffered minor burns to the face and arms. The first employee was hospitalized.",1
"An employee was assembling overhead jacks for an upper forming system when he fell approximately 20 feet off of the pier of the bridge. He broke his leg and ankle, requiring surgery.",1
"On 8/18/2015, a garbage truck's front tire ran over and broke an employee's foot and leg. The employee had exited the front cab of the truck while it was still moving to pick up trash. The employee required surgery.",1
An employee was using a pressure washer when he lacerated his left middle finger. He was hospitalized overnight.,1
"On 8/18/2015, in the Disney Magic Kingdom's cast member parking lot, an employee was struck by a pick-up truck driven by another Disney employee. The injured employee suffered a broken ankle and required surgery.",1
"On 8-18-2015, at about 10:00 a.m., an employee was operating a Bobcat machine to remove soil. With soil in the bucket, the employee travelled forward down an incline. The elevated bucket tilted forward and the bucket got stuck. The employee could not get the machine to tilt back and the rear wheels were 1 foot off the ground. The employee's right foot got caught between the back of the bucket and the machine. The top of the employee's right foot bones were crushed, requiring surgery.",1
"An employee was loading cream on a milk truck using a flexible hose when the employee's finger got caught between the handle and body of a plunger valve, resulting in an amputation.",0
"An employee was installing insulation plates on a flat roof. While walking backwards, he tripped and fell 20 feet through a skylight, injuring his right wrist and left heel.",1
"An employee was drilling holes in steel pipes when his glove got caught in the drill, pulling his right hand into the rotating part. His right middle finger was surgically amputated.",1
An employee was closing the office safe (4 feet by 3 feet) when her left thumb got caught between the safe door (3 inches thick) and the safe door jam. Her left thumb tip and nail were severed.  She was hospitalized and required surgery.,1
"An employee was attempting to relocate a pallet of car batteries while operating a forklift with the forks elevated. As he attempted to turn, the forklift flipped over and pinned him beneath the roll-over protector and the ground. He suffered blunt force trauma to the upper torso and ruptured his spleen, requiring hospitalization.",1
"An employee was traveling by ATV on a forest road. While turning a corner, he was thrown from the ATV and hit the ground. He broke his rib and collarbone and bruised his lungs.",1
An employee slipped and lacerated nerves in the right-hand middle finger.,1
"The employee was conducting a residential building inspection and was chased by a dog in the back yard of the residence. While running away from the dog on an uneven surface, the employee fractured the left foot requiring surgery to repair the injury.",1
An employee was standing beside a truck watching the septic tank get pumped out. The employee bent to pick up the hose and was bitten by a coral snake on the right index finger.,1
An employee was dumping a plastic trash cart into a compactor. Her right ring fingertip got stuck between the plastic receptacle and the metal frame around it. She sustained a fingertip amputation.,0
"Am employee was adjusting the grinding plate of a machine when the plate fell on the employee's hand, amputating a finger.",1
"An employee was carrying a carton of eggs downstairs at the cafeteria. She missed the bottom stair and fell to the ground, fracturing her left ankle/foot and spraining her right ankle. She was hospitalized.",1
"An employee was performing service work on paving equipment outdoors. The employee experienced stomach pain, possibly due to heat stress, and was hospitalized.",1
An employee tripped and fell when walking toward room 3536 while doing rounds in the facility hallway. The employee's left thigh bone was fractured.,1
"An employee was standing near a hose/pipe connection. The pressurized water hose came loose and struck an employee while moving at a great speed and force, breaking his leg.",1
"An employee was exiting the chip box of a bucket truck. When he moved his left foot off of the tailgate, his right foot slipped due to the weight shifting and he lost control of his footing. He fell and suffered internal bleeding near the kidney.",1
"An employee was doing a service check on a tilt bed trailer. The employee went to the front of the trailer to lock it in place so it wouldn't tilt. There was a small gap in the neck of trailer. A coworker stepped onto the back of the trailer and the trailer went upward, crushing and amputating the employee's finger.",0
"An employee was moving pallets in the warehouse with a forklift. As the employee exited the forklift, it rolled and pinned the employee between the wall and forklift. The forks broke the employee's leg.",1
An employee was helping a forklift operator load two pallets of solar panels into a flatbed truck. The employee was holding a piece of dunnage and his finger got pinched when the forklift operator pushed the second pallet farther into the box truck. The employee's right ring fingertip and nail were amputated.,0
An employee was kicked in the chest by a horse while attempting to saddle it. The employee broke multiple bones and suffered a laceration.,1
"An employee was distributing mail from a pallet to mail routes.  He tripped over plastic wrapping and struck his head on a desk, suffering a laceration and head trauma and requiring hospitalization.",1
An employee was being lifted by an aerial lift to repair a wellhead. The employee's left thumb got crushed and fractured between the aerial lift and the wellhead.,1
"On August 18, 2015, at approximately 7:00 p.m., two employees were performing die setting operations. The first employee used a forklift to place a die in a press. The second employee approached the backside of the press and began to install bolts in the die. The first employee had not finished aligning the die. When the first employee repositioned the die for bolting, it caused the washer and bolt that the second employee was holding to move and pinch the second employee's finger against the die. The second employee's left middle fingertip was amputated.",0
"On August 18, 2015, an employee was hospitalized after tripping and falling onto a box of granulator blades that were awaiting sharpening. The employee sustained lacerations to the hands and arm and was hospitalized.",1
An employee was cleaning the shower line (high pressure water line) in the liner head box on the wet end of a paper machine. He stood up to get out of the box as someone from maintenance began to move the crane and got caught between the crane bridge and the liner head box lid. He broke his ribs and left forearm and dislocated his sternum.,1
"An employee was removing parts from a rack while standing on a portable platform. He lost his balance and fell approximately 50 inches to the walkway below, breaking two fingers and fracturing his pelvis.",1
"An employee was operating a forklift.  When the employee made a hard right turn, the forklift turned over on its side and trapped the employee's left foot underneath the roll cage.  The employee was hospitalized and his foot was amputated.",1
An employee was climbing a 20-foot extension ladder to adjust boxes he had flung to the top of the wall when the ladder slipped. Both the ladder and employee fell down. The employee was hospitalized for a fractured pelvis.,1
"An employee was performing maintenance on a Cellunator when their left glove got entangled in one of the disks, amputating the left ring fingertip to the first knuckle.",0
"An employee was rigging the painter's boom when the rigging rope got cut on a sharp edge and broke. The rigging came down and hit the employee in the left knee, causing a laceration.",1
"An employee was hospitalized after suffering breathing difficulties related to a compressed air spray operation to spray paint fire extinguishers conducted on August 19, 2015. A respirator wasn't worn and no monitoring was conducted to determine employee exposure during spray operations.",1
"An employee was grinding a chisel. When he placed the chisel on the work blade, the grinding wheel caught the chisel through the work rest and pulled his left thumb into the grinding wheel. His left thumb was partially amputated.",1
"An employee was parking a stand-up forklift in the equipment room for powered industrial trucks. He struck another parked lift while his foot was hanging outside the platform. His foot was crushed, requiring hospitalization.",1
"An employee was moving a load using a power jack when, due to wet floors, he lost control and crashed the power jack into a stack of pallets. The pallets fell on him, injuring his right ankle.",1
"An employee was standing between an RCD pipe and a loader with forks on it when the pipe rolled and pinned the employee to the loader, crushing and fracturing his leg.",1
"An employee pouring concrete was struck by a car that drove into the employee's work zone. The employee sustained a broken leg, as well as cuts and bruises to the hip.",1
"During welding operations, an employee's right pant leg caught on fire, resulting in 1st and 2nd degree burns. FR-rated pants were not worn at the time of the incident.",1
"An employee was using a winch to rehang beef that had fallen off the hook when his finger got caught between the trolley and the rail, amputating the fingertip.",0
"An employee was climbing a ladder after a rain storm to set a 2 X 6 on the roof.  The employee slipped and fell about 15 feet to the ground, fracturing his vertebrae and injuring his head.",1
"On 8/19/2015, an employee was working out in the morning as part of the unit's training exercise. The employee experienced nausea and vomiting, almost fainted, and was hospitalized with a muscle injury.",1
An employee fell from a ladder and injured his right leg.,1
An employee lost control of a stand-up forklift and their foot got crushed between a racking system and a forklift.,1
A maintenance employee fell approximately 4 feet and fractured his arm when the airline (pipe) he stepped on broke.,1
"An employee was walking down the hallway. While turning to the elevator, she slipped and fell, fracturing her right hip on the wet floor. She was hospitalized.",1
"A maintenance employee was performing daily inspections on the Dominator Ride. He attached a fall protection device to the carriage of the ride and rode the carriage to the top, then stepped off of the carriage and onto an inspection catwalk. He contacted personnel on the ground to lower the carriage so he could inspect the ride cables. He did not disconnect his harness and lanyard and was pulled off the catwalk by the harness and lanyard as the carriage was lowered. He was left suspended in the air from the lanyard and harness, suffering seven broken ribs, as well as neck and shoulder edema and contusions.",1
An employee was delivering mail on their route when they began to feel unwell and vomited. The employee was diagnosed with dehydration.,1
"An employee was installing light posts when the derrick truck swung the light post and contacted the power line behind them. The trailer holding the post became energized, and the employee received severe electrical burns.",1
"An employee was trying to unhook lumber at the sawmill gang when the hook flopped. He lost his balance and fell, and his left hand went between a roller and a plate, crushing his left thumb.",1
"While closing a gate to an animal pen, an employee's right ring finger got caught in the gate and was amputated.",0
"After performing mail carrier tasks, an employee suffered from heat stress/exhaustion.",1
"On 8/19/2015, an employee stepped and fell between the trailer and the dock. His injuries included a lacerated knee. He was hospitalized for stitches and/or staples to close the laceration.",1
"An employee at the warehouse placed a 35-pound box of degreaser on the forks of a motorized stand-on powered industrial vehicle and hit the wrong button, causing the PIV to move backwards and pin the employee against the rack system. The employee suffered a crushing fracture to the left leg.",1
"An employee fell from the roof while looking for anchor points, breaking a leg.",1
"An employee was cutting and grinding metal on a building column to prepare it for painting. A backhoe nearby lurched and pinned the employee between the backhoe bucket and the building column, injuring (hematoma) the employee's left thigh requiring surgery.",1
"On August 19, 2015, an employee severed his right hand middle finger while operating a unguarded auger.",0
An employee was walking down the hall toward the nurse's station when she fell and broke her right hip.,1
An employee was piloting a boat to bring crew members back to shore. The boat navigation systems indicated that they were farther out in the channel than they actually were. The boat hit a tree and threw two employees onto dry land. One of the two employees was hospitalized.,1
"On 8-19-15, an employee had a reaction while cleaning. The employee experienced difficulty breathing and anaphylactic shock and was hospitalized.",1
"On August 19, an employee was feeding sod into a jammed plug machine. While trying to clear the jam, her finger got cut on the blades, which were still spinning. She later had the tip amputated.",0
An employee was hospitalized when she stepped into a floor opening and fell. She was cleaning the deli area with coworkers. The floor drain was removed for cleaning purposes. She required surgery for her injured right ankle.,1
"An employee bent over to unplug an electronic pencil sharpener and was unable to straighten their back, suffering a lumbar injury.",1
An employee was directing traffic at the main parking lot along Lancaster Avenue. The employee experienced heat exhaustion and was hospitalized.,1
"While slicing meat on a meat band saw, an employee's hand slipped and her right middle and index fingertips were amputated.",0
"An employee was standing on the ground and tripped on a fallen tree. The employee was trying to cut a vine when the chain tip hit the wooden fence, causing the chainsaw to kick back. The chain hit and lacerated the employee on the top of the left shoulder.",1
"An employee was trying to sort out a stray cow that had come into the pen. The employee's horse stumbled. He tried to dismount the horse, but his foot got caught in the stirrups. He fractured his lower right leg.",1
An employee's right ring finger was partially amputated when it got pinched between a reel of veneer and the reel track.,0
"An employee was unloading pipes by cutting the metal band that held them all together. One of the metal pipes came loose and rolled over, falling on the employee's foot. The employee's right big toe was amputated.",0
"An employee was attempting to change out an adhesive pot on a machine. During the draining process, some of the adhesive spilled out. The employee slipped and fell on the liquid adhesive, breaking his tibia and fibula in the right leg.",1
An employee fell and broke her leg while walking in the lobby area.,1
"An employee was closing the lid that covers the tire shoot when the lid fell on his left hand, partially amputating at least one finger.",0
"On 8-20-2015, at about 10:00 a.m., an employee descending a ladder lost his balance and fell to the concrete ground, sustaining injuries.",1
"An employee stepped from a ladder to the roof, slipped, and fell to the ground. The employee was hospitalized with fractured vertebrae.",1
An employee was operating a pallet jack. A coworker operating a forklift with the forks up ran into the pallet jack. One of the forks struck and cut the employee's upper right thigh.,1
"An employee was guiding a forklift driver to a specific area. The forklift hit a chuck hole in the ground, causing the load to shift and fall onto the employee's leg. The employee sustained a broken fibula and tibia, several broken metatarsals, and a fractured foot.",1
"On August 20, 2015, an employee was rethreading the extruded tube product into the belted puller. The rollers caught his glove and pulled his left thumb into the nip point, crushing it. He was hospitalized for a left thumb contusion.",1
"An employee was using a forklift to line up the shaft and bearing on a yarder. His finger was inside a bolt hole on a cable drum when the weight was shifted to line up the equipment. His finger got caught between the drum and the forklift fork, necessitating the amputation of his right index fingertip.",1
An employee was running an obstacle course when he ran into a support beam and injured his knee.,1
"An employee was driving a forklift at the Walmart Distribution Center in Smyrna, Delaware.  He dismounted the moving forklift, which drove toward a vertical I-beam. His left foot got caught between the I-beam and the forklift and his toes were crushed. All of his left-foot toes were surgically amputated.",1
An employee tripped on the smock of another employee and fell to the ground. The employee was hospitalized with a fractured right femur.,1
"An employee was training a coworker on how to operate a CNC machine when she tried to adjust the clamp that holds the part being processed. The clamp is operated by a foot pedal on the floor. While adjusting the clamp, she inadvertently stepped on the foot pedal, activating the clamp and severing her right index and middle fingertips.  She required surgery.",0
"An employee was running parts through a punch press. The part jammed, so he attempted to retrieve the part from the machine. His foot hit the foot pedal and activated the punch, which amputated his left thumb down to the first bone and required surgery. The guard was not in place at the time of the incident.",0
"An employee was on the fourth rung of a ladder that was leaned up against a modular home.  A tractor moved the modular home while the ladder was still leaned against it. The employee fell from the ladder, breaking a foot and hurting his/her back. The employee was hospitalized.",1
"An employee was in the mold maintenance area unloading an approximately 4 ft. by 4 ft. steel mold from the transport trailer with a crane. He stepped up on the trailer (approximately 29 inches high) and as he was stepping down from the trailer, he slipped and fell to the floor fracturing his left elbow in multiple places. The employee was admitted to the hospital for surgery to repair the fractures.",1
"An employee was standing on a 5' X 10' board, which was laying on jersey barriers so that the employee could screw other pieces of wood  to the board at a downward angle. The employee stepped off the edge and fell 4 feet, injuring the left knee and requiring hospitalization.",1
"On or about August 20, 2015 at approximately 4:40 p.m., an employee received a hand injury while working on the pepper production line. The employee was feeling dizzy and went to sit on a small roller conveyor. As he sat down, he put his hand on a moving chain conveyor, which pulled his finger into the sprocket and partially amputated it.",0
"An excavator was dislodged from a flatbed trailer after hitting an overpass on Northbound I-15. An employee attempted to reload the excavator onto the trailer.  The excavator encountered fluid on the flatbed and slipped off the trailer. The employee was injured, sustaining a hairline fracture to the neck vertebrae.",1
"An employee was operating a slitter machine and grabbed the latch. The latch is stopped at 90 degrees by a safety pin, however the safety pin was worn out and it did not stop the latch. The latch continued past the 90 degree angle with the employee still holding it with his left hand and made contact with the metal box that houses the slitter's major bearings. Once the latch made contact with the metal box it crushed employee's left little, ring, and middle fingers. The little finger was amputated at the hospital.",0
An employee was measuring a pallet of paper on an automated conveyor line. The conveyor cycled and the employee's finger got caught between the paper and an I-beam. The employee's left-hand middle fingertip was amputated.,0
"An employee was visually inspecting a steel pipe while standing between the pipe he was inspecting and another pipe. One of the pipes started to roll towards him, and he got caught between the two steel pipes, sustaining soft-tissue damage to both legs.",1
An employee entered the blast booth service room to investigate why media was not flowing. His leg was amputated when he stepped into a floor auger. The cover guarding the auger was removed at the time of the incident.,0
An employee was installing MIBS (solar panel supports) outdoors when the employee started to feel lightheaded. Coworkers took the employee into the general contractor's trailer where the employee began to vomit due to heat stress.,1
"An employee was exposed to bacteria, became ill, and was hospitalized.",1
"An employee was assembling rings into plastic tubes. The employee ran out of large plastic tubes and went to the crib area storage to retrieve more. The employee climbed onto a rolling ladder and fell off, sustaining fractures.",1
An employee was forming parts on a hydraulic press brake. The material being formed rotated and crushed the employee's thumb between the material and the press brake frame. The employee's right thumb tip was amputated.,0
"An employee was helping a flow hand from another company change rubber between two pieces of high-pressure pipe. As the employee was checking to make sure the rubber was seated properly, the clamp slipped, amputating his right-hand middle fingertip.",0
"An employee was adjusting the track control on a conveyor when his hand got caught by the chain, partially amputating his left middle and ring fingers.",0
An employee was repairing an axle hub when a bolt from the hub came out of the air gun and struck the employee's left index finger. The finger was fractured.,0
"On August 21, 2015, at 8:30 p.m., an employee was starting a pump when an expansion joint failed, releasing sulfuric acid into the atmosphere. The employee inhaled sulfuric acid fumes as he was evacuating the area. He was hospitalized.",1
"On August 21, 2015, an employee was scanning products on the dock when she was struck by an unstable load (boxed flat screen TVs) being transported by a forklift truck. Approximately 500 pounds fell on the employee, who sustained crushing injuries to her left ankle, ligament damage to her right ankle, and contusions to her lower body and both legs. She was hospitalized.",1
An employee was troubleshooting the vacuum channel of a machine when his hot gloves got pulled into the blocks. Half of his right ring finger was amputated. The guard was not in place at the time.,0
An employee was loading cars and moving a lever to adjust platform heights. The wrong lever was moved while the employee's hand was resting on a long pole. His left index finger got caught on the hydraulic platform and was partially amputated.,0
"An employee was walking in the green lumber storage area and slipped on a wet surface and fell, suffering a broken hip.",1
"An employee pulled Printing Section # 1 out of the Martin Machine and opened the interlocked cover on the ink rollers. He then took a pair of vise-grips, depressed the jog button, and clamped the button to the housing in the depressed position causing the rollers to rotate slowly. The employee then used a hose to spray water on the partially submerged  ink rollers to clean them. The inside of the container in which the rollers were partially submerged was painted black. The color of the ink was also black. The employee reached his  right hand into the liquid to see if it was clear, and his hand was pulled into the nip points of the rollers resulting in the amputation of the middle and ring fingers and one half of the index finger on his right hand.",0
An employee suffered burns to his face and head while repairing an air conditioner compressor with a torch at a customer's job site.,1
An employee's finger was bitten by a venomous snake while attempting to search for a welding pipe. The employee was hospitalized.,1
An employee was attempting to remove a paper jam in a folding machine when the machine indexed and amputated the employee's right index fingertip.,0
"An employee was working from a roof approximately three stories high when he fell about 15 feet. He was wearing his harness at the time. During the fall, his right arm was struck and lacerated by a radial arm saw that fell with him. He sustained deep cuts in his tendons and loss of feeling in his fingers.",1
An employee was in a ditch (approximately 7 feet deep) unhooking a pipe from a backhoe when the ditch caved in from behind. The employee hit his head against the pipe and lost an eye. He was hospitalized.,1
An employee was hooking up a backyard machine to a digger derrick when the employee's finger got caught between the hook and the backyard machine. The employee's pinky finger broke.,1
"An employee was helping a coworker assemble a vehicle seat.  The seat was moving down the assembly line on a jig, which allows the seat to tilt forward and backward.  The employee tilted the jig with one hand while his other hand was in a pinch point. The employee's right-hand pinky fingertip got degloved between the first knuckle and the start of the fingernail. The employee was hospitalized.",0
A worker suffered heat stroke while forming and grouting a pressure relief valve.,1
"On 8/21/2015, two employees were traveling toward each other in the same aisle on separate stand-up forklifts. They collided, and one employee suffered a right foot injury, including a laceration and possible broken bones. The employee was hospitalized.",1
"An employee was stringing new power line using pools of wire that are carried on a reel mounted on a trailer.  His finger got pinched in the reel, and his left ring finder was crushed and amputated.",1
"An employee was operating a punch press and was using pull-backs to protect his hands.  His left hand got caught in the press, and three fingers were amputated.",1
An employee was inspecting freight he had just placed in the aisle using a forklift when a forklift driver backed up and pinned the employee between the two forklifts. The employee sustained a broken hip.,1
"On August 21, 2015, an employee's left-hand middle and index fingertips were amputated by a saw when the employee attempted to adjust the blade. The saw was running at the time of the incident.",0
"An employee was unloading product from a box trailer. The driver pulled away from the dock and the employee fell out of the back of the truck to the ground, suffering a concussion and fractured skull.",1
"An employee tried to prevent a turkey neck from going through the peeler. The employee's glove got caught in the peeler rollers, which crushed the left middle fingertip. The fingertip was amputated below the fingernail.",0
Two forklifts collided in the processing area causing one of them to tip over.  The employee in the forklift that tipped over sustained a broken arm and a broken ankle requiring surgery and hospitalization.,1
"An employee pulled the start cord on a generator, and the generator fell on the employee. The employee suffered a strained knee.",1
An employee was cutting cabbage using a produce knife when she cut her right index fingertip.,0
"Employee tripped on a metal skid 8' X 20' X 5"" and fractured an ankle.",1
A demolition saw kicked back on an employee who was cutting railroad tie. The saw hit his opposite shoulder and caused soft tissue damage (blood and nerve damage).,1
"An employee was dispensing propane from a main propane tank into a smaller tank. As he unscrewed the nozzle from the smaller tank, a burst of propane came out from the main tank and burned his hands and forearms.",1
"On August 22, 2015, at approximately 0100, an employee turned a stand-up forklift and hit a crate. The employee's left foot, which was outside of the cockpit, broke.",1
"An employee was cleaning out a mud pond when his right leg, up to his shin, became stuck in the mud. He was unable to free himself. A coworker used a high-pressure washing wand to try to loosen the area around the employee's leg.  The pressure wand got too close and cut through the employee's boot, lacerating the side of his right foot from the small toe to the middle.  He was hospitalized and received stitches.",1
An employee experienced an amputation to the right middle finger while clearing a jam from an energized and functional fruit feeder.,0
An employee amputated the fourth and fifth fingertips of the right hand while working on a milling machine.,1
An employee riding a railcar in order to move it around a switch yard lost his balance and lacerated his foot.,1
The employee was walking and tripped on a curb dislocating both elbows.,1
An employee was found unconscious lying next to the stock picker he had been operating. It is suspected that he fell from the machine. The machine's work platform was approximately 15 feet above the warehouse floor when the employee was discovered.,1
"Four employees were burned by hot plastic while working in the vicinity of a plastic extruding machine. One employee required hospitalization. The employees were purging an extruder machine and cleaning the die when they were sprayed with hot, melted PVC material. The hospitalized employee suffered first and second degree burns to the face and neck.",1
Employee climbed nine feet to the top of a machine to troubleshoot a jam.  The employee lost footing and fell nine feet to the ground below resulting in a right hip fracture and a facial fracture.,1
An employee fell as he was stepping up onto the sidewalk and fractured his right hip.,1
"An employee amputated the fingertips of the right thumb, index and middle fingers while cleaning the rollers on a printing press. The machine was running at the time of the incident.",0
An employee received an electrical shock while repairing 7200 KV power lines resulting in hospitalization and the amputation of three fingers on his left hand.,1
An employee fell off the back of a pickup truck and broke his left arm.,1
An employee suffered a partial amputation of the left index finger while performing patty-machine maintenance.,1
An employee suffered a severe dislocation injury to his left foot while operating a sit down forklift when he was struck by a second forklift operated by another employee.,1
An employee was hospitalized due to a crushing injury to a finger on the left hand while operating a fork truck.,1
"A maintenance technician was working on the #2 GB Dust Collector/Grinder to change the belt on the motor. The employee's right pinky finger got caught between the belt and the fly wheel, amputating part of his finger.",0
An employee walking under a scaffold was struck in the head by a wooden pallet that was thrown down from above resulting in hospitalization.,1
"An employee was descending a portable ladder while carrying a box of materials, missed the bottom step, and fell approximately three feet to the concrete floor. The employee was admitted to the hospital with a fractured hip.",1
An employee suffered third and fourth degree burns to the arm while installing a rubber gasket in the wrap weal #8 machine when the machine closed on the employee's arm that then contacted the 250 degree heated surface.,1
An employee providing home health care at a residential setting ran after a disabled child that had run into the street and was struck by a motor vehicle.  The employee sustained a broken leg.,1
"An employee was standing on a secured mat. When she turned to walk away, she tripped and fell breaking her pelvis.",1
"An employee was entering Unit 2 (north stairwell) through a door.  The employee reached back to stop the door from slamming and his right index finger got caught between the door and its frame crushing the tip of his finger.  The right index fingertip was amputated at, or just above, the distal (1st) knuckle.",1
An employee was working on the soy bean preparation line when he caught his hand near a clam-shell-like device that stops the flow of soy beans to the scale resulting in the amputation of his left middle fingertip.,0
An employee was cleaning a pressure cooker with a water hose. His left hand got caught in the rotating blade inside the machine and was amputated above the wrist.,1
 A letter carrier became sick to his stomach. He was given water and told to sit down. The employee was transported and admitted to the hospital for dehydration.,1
An employee was pulling a tarp off wood and a staple struck him in the eye. He was admitted to the hospital for eye surgery.,1
Employee was fabricating sound proof enclosures and began not feeling well. He was given water and told to sit down and rest. The employee became sick to his stomach and complained of chest pain. The employee was hospitalized for dehydration.,1
"An employee was stripping wires using a knife and cut his finger. When they tried to wrap his finger, he passed out and hit his head on the floor causing head injury.",1
"An employee was standing on a step stool while applying a surgical dressing in the operating room. While stepping down, she stepped into a table-side bucket and fell, fracturing her left ankle. She was admitted and had surgery to repair her ankle.",1
An employee's leg got entangled in the tag line of the bucket used to haul debris. The bucket went up along with the employee and then the rope broke and the employee fell approximately 10 feet breaking a leg.,1
An employee slipped and fell while unloaded a food truck suffering a head injury.,1
"While loading a truck, an employee experienced heat illness. The employee was admitted to the hospital and given treatment.",1
An employee received a finger injury while working with a sawing machine.,1
An employee was unloading a truck at a customer location when the ramp on the back of the truck fell. The employee fell approximately three feet to the ground resulting in three broken ribs and a punctured lung.,1
An employee was in a trench box inside of a 30 foot deep trench signaling a backhoe operator who was lowering a pipe into the trench. The employee's left arm was caught between the bucket (6 feet wide and 9 feet deep) and the trench box. The employee suffered contusions and swelling of the employee's left arm was evident. The employee was hospitalized.,1
An employee was installing a disc section on a tractor implement when his hand was caught between the pry bar and the implement frame. The employee received deep lacerations to his fourth and fifth fingers. The employee had surgery and was admitted overnight for observation.,1
An employee fell backwards off of an eight foot step ladder striking his head on the ground.,1
An employee fell approximately 25 feet from a ballast tank.,1
An employee was walking up the attic stairs in a house to install an AC unit. One of the steps gave way and he slipped and fell resulting in a concussion and 2 cracked ribs.,1
"An maintenance employee opened a closed panel of an energized motor which activated unexpectedly catching the employee's index, ring and middle fingers in the pulley system and causing an amputation injury.",1
An employee was walking around a vehicle and banged an elbow on it. The employee was hospitalized for a contusion and infection to his left elbow.,1
An employee was injured when his arm was caught in a smooth idler pulley on the stuffer output belt conveyor resulting in multiple fractures.,1
An employee performing quality checks on filters leaving the assembly line amputated the left pinky finger from the first knuckle when it was caught between the vertical guide rail and the horizontal dead plate. The force of the backed up filters contributed to the injury.,0
An employee was installing a new fertilizer pump and hoisting it up with a chain when a link on the chain broke. The pump fell and struck the employee in the left leg causing a severe laceration and breaking the lower leg.,1
A parking attendant used a fire extinguisher to fight a car fire. The employee felt shortness of breath after the incident. The employee was hospitalized for smoke inhalation.,1
An employee operating a reach truck was struck on the head and shoulders by two boxed toilets that fell 35-40 feet from the storage rack.  The employee was subsequently hospitalized.,1
An employee was walking by an unguarded conveyor belt and amputated the right thumb tip.,0
An employee was operating a horizontal band saw and amputated three fingers on the left hand.,1
An employee caught a finger in a jammed bagging machine resulting in the amputation of the left index fingertip.,0
An employee amputated the tip of the left pinky finger in a roller conveyor.,0
"An employee was welding inside of a wing tank for about 30 - 40 minutes.  He came out of the void at about 1500 hours feeling lethargic and weak and was assisted to the cool down area.  The employee left the cool down area and went to the office where the decision was made to take him to the hospital.  He was diagnosed with heat illness and treated with fluids.  He was officially admitted to the hospital at about 2000 hours.  The injured employee was wearing leathers, a welding shield, and gloves during welding.",1
"An employee was on a short step ladder removing a synthetic strap used in binding steel tubing/pipes when he fell off the step ladder fracturing the top left tibia plateau, close to the knee.",1
An employee fell off an 8 foot step ladder and fractured an elbow.,1
"On August 24, 2015, an employee of Russell Standard was struck-by a tri-axle asphalt truck.  The employee suffered multiple injuries including lacerations to his liver and lungs, crushed ribcage, and vertebrae.",1
An employee was caught in between a moving machine and a sprocket guard while building trusses resulting in a hip injury.,1
"An employee opened a trailer door to install a sticker. He grabbed the strap at the bottom of the roll down door with his right hand, stepped down onto the ICC bar and slipped or lost balance. With his right hand still on or in the strap, the employee's body spun around and the door slammed down on his left hand breaking bones.",1
"At approximately noon on Tuesday, August 25, 2015, an employee tripped down a flight of stairs and sustained a head injury requiring five to seven stitches.",1
A worker was standing beside a milling machine. His right foot got too close to the milling head and the machine ran over it causing severe lacerations.,1
An employee was struck in the head by a slab of concrete debris that fell from the backhoe. The employee suffered fractured vertebrae in the neck and back.,1
An employee was erecting a fence when he tripped over some rebar on the ground and fell. He fell on top of his tool belt and punctured the stomach on his tools (pliers) in his tool belt.,1
An employee was hospitalized when he fell from a front end loader sustaining a head laceration and a broken sternum.,1
An employee exited the hospital to retrieve something from her vehicle. The heel of her shoe got caught in the doorway and she fell fracturing her ankle.,1
"An employee was backing a forklift off a scale. He backed over a wooden pedestrian walkway that gave way under the weight of the machine, tipping the forklift onto a column. The employee's left hand was trapped between the column and the forklift crushing three fingers. The employee was hospitalized.",1
An employee fell while standing on the raised forks of a fork truck injuring his hand and leg.,0
"On 8/25/2015, an employee was washing a gut buggy and a tray fell onto employee's finger fracturing it.",1
"A crane operator in the stacking bay was attempting to lift a trailer using a 7.5 ton crane.  The employee had his hand on the chain to keep the trailer hooked up in the correct location.  When the slack on the chain came up, the employee pinched his left fingers between the chain and the trailer breaking the left index and middle fingers.",1
"An employee climbed on top of a 55 gallon barrel to retrieve some equipment from a rack, lost his balance, and fell four feet into an empty stainless steel vat below causing him to fracture five ribs.",1
"An employee was walking across the turbine deck (on the third floor) and tripped on a piece of uneven concrete.  As he was falling forward, he put both of his arms out to catch himself and broke both of his arms.",1
An employee fell down the stairs injuring a leg and cutting an ear.,1
Employee was operating a semi-trailer lift gate to lift a load onto the truck.  While the gate was lifting he tried to open the latch and his fingertip got caught between the lift gate and the latch.,1
"An employee was walking out of a salt shed, slipped on gravel and fell striking his knee on rebar. The severe laceration required surgery to repair.",1
"An employee was performing maintenance on a metal stamping furnace and was struck by the metal furnace door, breaking ribs on both sides of the torso.",1
"An employee was setting up signage at a traffic control zone.  A private vehicle swerved onto the closed lane, missed the attenuator truck barrier, and struck the employee. The employee sustained broken ribs and a head laceration.",1
"An employee was unloading wood from a truck onto a conveyor belt system when his left hand got caught between the rollers and the wood, crushing his index and middle fingers.",1
A mail carrier was hospitalized due to a heat related illness.,1
"On or about August 25, 2015, an employee suffered the amputation of two fingers, when his right hand got caught between the wire and spool while running wire.",1
An employee sustained an injury to his left ring finger which resulted in an amputation of a digit on his left ring finger at the hospital. The employee's gloved hand was caught by the wire rope on the crane while he was conducting crane inspection activities.,0
"An employee was installing a chicken wire catch all to a sidewalk shed. The employee was standing on the sidewalk shed wall and fell approximately 16 feet onto an iron fence and the concrete ground below.  He sustained broken ribs, a broken jaw and lacerated the liver.",1
A worker was wearing leather work gloves and cutting aluminum bar stock on a horizontal band saw.  His hand contacted the moving saw blade and was pulled in causing an amputation of the left index fingertip.,0
A electrical lead on the drive motor on a powered industrial truck began to melt and fume.  A worker nearby inhaled the fume/smoke and was taken to the hospital.  ,1
An employee was stuck by plastic containers that fell off a forklift that was operated by another employee when the forklift struck a washing machine. The employee suffered a leg injury.,1
An employee was cleaning the rubber plates on the printing press and crushed three fingers between the printing cylinders. The machine was running at the time and was not locked out.,1
An employee was operating a button making machine when she reached around the guard to pull out the stems before it jammed up. Her foot was still on the foot peddle and it was pressed when her finger was in the point of operation. The machine smashed her right index finger resulting in the amputation of the finger.,0
A truck driver fell ill while standing in the parking lot talking with other employees.  Management took the employee to an urgent care clinic where he was diagnosed with dehydration. He was then  admitted to the hospital and given fluid treatment.,1
Two employees were overcome by fumes that were emitted into their work area from epoxy being applied to the floor in the garage.,1
An employee severed his right middle fingertip when it got caught in a slot conveyor.,0
An employee broke his leg when a piece of equipment shifted on a jack and kicked the jack out causing the piece of equipment to fall on him.,1
An employee was loading a paver onto a truck. A foot was run over by the paver and may be amputated.,1
One employee received a partial thumb amputation when it was caught in a pinch point while raising a dock plate.,0
"On August 25, 2015 at approximately 11:25am, an employee was attaching slings to a spreader. When the vessel moved, the sling hit his right middle finger and tore the nail bed off. The employee was treated and released from the hospital on the same day.",1
An employee was standing in the lay down yard when a 12 inch pipe shifted and pinned his left leg between two pipes. The employee was admitted to the hospital with a broken tibia.,1
"On 08/25/15 at 10:15pm, an employee's hand was caught in the point of operation of a hydraulic press and he lost three fingers.",1
"On August 25, 2015 an employee was admitted to the hospital due to heat stroke.",1
"A temporary employee was helping to load a 3' X 3 ' bag of cement onto a forklift while standing on two stacked bags of cement, 6 feet tall. The employee lost his balance and fell to the cement floor causing a skull fracture requiring admittance to a hospital.",1
An employee amputated a fingertip working with a tubing machine.,1
A temporary  worker suffered a partial amputation of the left index finger when it was caught by a blade inside a pump.,0
An employee was struck by falling concrete cinder blocks while walking underneath a bridge and sustained a skull fracture.,1
"On 8/26/15, an employee received laceration injuries to the fingers on the left hand while cutting wood on a table saw.",1
An employee suffered heat stress while doing landscaping work.,1
An employee sustained a serious injury when wiping wood dust residue from the notching machine.  The machine caught his glove and pulled the employee's hand into the point of operation. The right hand was amputated.,0
An employee was operating a roller compacting the dirt around a bridge when the roller tipped over on its side and pinned the employee from the waist down under the roller. The employee was transported to a hospital and treated for a broken pelvis.,1
An employee was using a machine to clean meat and lacerated a finger on the right hand.,1
An employee tripped and fell while descending stairs breaking the femur.,1
"An employee was hospitalized after getting his right arm caught between the arm of a skid steer and the frame, fracturing his wrist.",1
An employee cut his right index finger on a piece of aluminum he had just cut on a table saw.,1
"An employee was working on a power line from a bucket truck moving wire lines from an old pole to set a new pole when the old cross arm braces broke and live electric wires fell on his right shoulder/arm. As a result of the two phased electrical contact flash, the employee suffered a second degree burn on the right shoulder and right side of his body and was hospitalized.",1
An employee was cleaning out excess meat from a meat grinder and amputated two fingers on the right hand.,1
"An employee was lifting a battery when he heard a ""pop.""  The employee had cellulitis of the arm and the wound began oozing.  The employee was sent to the hospital for treatment.",1
Two employees were loading rice sacks onto a pallet for shipment.  The employees were horse-playing while doing this.  One employee pushed another employee causing him to step in between the slats of the pallet and fracturing the ankle.,1
"On August 26, 2015 at approximately 10:00am an employee was climbing a pallet racking system and fell approximately 10 to 15 feet breaking the L8 and L9 vertebrae.",1
An employee was hospitalized when he fell approximately four feet off the wing of a Challenger 300 aircraft while cleaning it. The employee broke the left leg and sprained the right ankle.,1
An employee fell approximately 8 feet from the roof while delivering roofing shingles and broke a leg.,1
An employee was adjusting a ratchet strap on a flat bed truck when his hand slipped off of the adjusting bar severely cutting his finger that required surgery and hospitalization.,1
"On August 26, 2015, an employee working on a metal tank was struck by a falling pipe assembly weighting approximately 700 lbs. after removing bolts from the top flanges. The employee suffered broken ribs and a possible fractured vertebrae.",1
"On or about August 26, 2015, an employee was exposed to an ammonia leak and sustained burns to the forehead, face and wrist. ",1
An employee was moving a cart with steel on it when the wheel of the cart got caught in a crack in the floor and the cart toppled over onto the employee's right ankle fracturing it.,1
"An employee came in from the stairwell, tripped over the door seal, fell and broke her elbow.  The employee had surgery and was admitted to the hospital.",1
"An employee was slicing thin like steak, and towards the end, he turned off the slicer, lifted the carriage and reached to retrieve the remaining product. As he reached, the blade had not come to a complete stop and the tip of the blade hit his right middle finger amputating the fingertip (soft tissue).",1
An employee was walking down a hallway while making rounds and miss-stepped and fell to the floor.,1
A paramedic participating in a training drill that required crawling through a fogged area looking for potential victims while wearing a SCBA experienced breathing difficulties and was taken to the hospital.,1
"An employee was walking from the south end of the mill to the north end of the mill when he tripped and fell, causing a fracture to his elbow. The employee was hospitalized for his injuries.",1
A scientist was bitten by a rat. The employee experienced an allergic reaction and was transported to a hospital.,1
An employee was removing the exit guard on the bar peeler machine.  The top hinge of the guard fell and caught the tip of the employee's finger between the guard and the machine.  The tip of the employee's right index finger was amputated.  The employee was not hospitalized.,0
"An employee was replacing a missing shingle on the cedar shake roof of a 2-story residence. He  stepped on a loose shingle, slipped, and fell 20 feet to a cobblestoned area of ground below. He sustained three cracked vertebrae and a bruised lung.",1
An employee suffered the amputation of his right foot when it was caught under a rail car.,1
An employee was moving a tie rod part from a cart to assemble into a larger part.  The part slipped from his hands and when he tried to catch the 18 pound part his middle finger was crushed between the part and the table resulting in the amputation of the fingertip.,1
An employee was using a nail gun to nail 2x4s for the purpose of making pallets.  The nail gun double shot during use causing the second nail to become lodged in the employee's stomach area.  The employee was hospitalized for treatment.,1
Two employees had just completed transferring a patient to a bed using a Hoyer Lift.  The employees were then going to wash the patient.  One of the employees stepped away from the bed and tripped on the Hoyer Lift.  The employee fell and struck her head on the wall.  The employee was hospitalized.,1
"An employee was building a bunker wall using an air nail gun.  As the worker was nailing, he fired the gun twice and a nail went into the employee's left thumb.",1
An employee bumped into equipment forks and sustained a bruise to the lower leg on 8/21/15.  The incident was reported to the employer on 8/25/15 when the employee sought treatment.  The employee was hospitalized on or about 8/26/15 for the treatment of a hematoma.,1
An employee working the cash register tripped over the fatigue mat and fell fracturing the femur.,1
An employee fell and hit the left arm on the counter fracturing it.,1
An employee was holding a pin while another employee was driving the pin in with a hammer.  The employee's finger was struck by the hammer resulting in the amputation of the fingertip.,0
An employee was positioning dunnage under a load when the load fell on the left hand resulting in the amputation of the left hand.,1
"An employee, a char-house operator, was washing sugar off the floor around filter-top #15.  He tripped over a hose and fell to the floor.  Hot water (180 degrees F) from the hose got into his elbow-length gloves.  His back was burned when he fell backwards.",1
"On or about August 26, 2015, an employee was struck-by an aerial lift while guiding it from the ground. The employee sustained a laceration and avulsion injury to the left leg.",1
An employee was operating a forklift and crushed his right pinky finger between the forklift and a warehouse rack. The fingertip including the nail was amputated.,0
"On August 27, 2015, an employee's pinky finger was severed while closing a gate inside a cattle trailer at a feed lot in La Salle, CO.  The employee was admitted to a hospital and underwent surgery to re-attached the finger.",1
An employee was pushing a dolly and slipped. The employee's thumb was caught between the handle and a piece of equipment. The employee was sent to the hospital and some tissue was removed by the doctor.,1
"An employee tripped and fell, while walking to her car on a public street. Employee was on work time at the time of the accident. The employee was hospitalized with a broken shoulder.",1
"An employee was hospitalized after being struck by a piece of debris (8 inch pipe) during a building demolition. The employee suffered nine broken ribs, a punctured lung, a broken finger and bruises on the face.",1
"On or about August 27, 2015, an employee suffered an amputation to the right index fingertip while cutting fabric with a straight knife cutter.",0
"An employee fell approximately three feet from a ladder and fractured a wrist, finger and ankle.",1
An employee was hospitalized for dehydration and heat stress.,1
An employee fell in the parking lot as she was attempting to go up a step and both legs went out. The employee injured both legs and sustained a right elbow abrasion. The employee was admitted to the hospital.,1
"An employee was walking up a hillside to plan line clearing work.  He stepped on a branch, which rolled under his foot, and fell breaking his ankle.  He was admitted to the hospital for treatment.",1
An employee was putting a bolt into a five foot steel I-beam and suffered the loss of the right thumb tip when it was caught between the end of the beam and the wrench.,0
An employee suffered a fingertip amputation while lifting a vehicle hood from one pallet to another pallet. The employee's finger was caught under the hood when the hood was set down on the pallet.,0
An employee was cleaning a trim blender while it was running and amputated the left index fingertip.,0
An employee fell in the copy room and broke her ankle.,1
"Two maintenance mechanics were adjusting a sensor on a shrink wrapper. The sensor was located under the wrapper table. After adjusting the sensor, the mechanics were moving the table back into position when the table shifted, catching the finger of one of the maintenance mechanics. The employee suffered the partial amputation of the right middle fingertip.",0
An employee was entering or exiting the cab or a front end loader and amputated the tip of his left thumb (without bone loss) while closing the cab door.,0
"An employee was dumping a 90 gallon cart at a customer's building.  The cart got wedged in the truck.  The employee climbed onto the truck to dislodge the cart, lost his balance, and fell from the vehicle striking his head resulting in a laceration and a concussion.",1
An employee was tack welding the steel walls on a manufactured storm shelter.  The tacks failed and one of the steel walls fell on him fracturing his L2 vertebrae.,1
"An employee was trimming carcasses on the final rail trimming line with a straight knife. The carcass shifted, changing the position of the employee's knife, which resulted in a laceration to his left bicep.",1
"On or about August 27, 2015, an employee suffered the amputation all four fingertips of the on the left hand.  The employee was using a concrete molding machine and in the process of inflating the interior core pinched his/her fingers between the core and the mold.",0
"On or about August 27, 2015, an employee suffered an amputation of the right index fingertip while helping to load a crane onto a flatbed for transport.",0
"On or about August 27, 2015, an employee suffered an amputation to the right middle finger and ring finger while working at a sheer press.",0
"While jacking up a pallet of fixtures and using 2x4s for bracing, an employee had his right index finger and thumb amputated when the pallet came down and smashed the employee's right hand between the pallet and the 2x4s.",1
An employee was struck by a forklift resulting in a broken hip requiring hospitalization.,1
An employee operating a walk behind floor scrubber suffered a right middle fingertip amputation when he reached under the floor scrubber to unclog it and his finger was caught in the rotating fan. The floor scrubber was running at the time.,0
An employee was working on a machine when the coupler fell off the jack stand striking the employee in the left leg causing a severe laceration.,1
"An employee left the casino floor and was walking down the ""employee only"" hallway towards The Dish (casino restaurant) when she fell and injured her knee.  She was admitted to the hospital where she underwent knee surgery.",1
An employee fell approximately 10 feet while setting straps on a storage tank and landed on his feet. He suffered injuries to both feet and a broken right ankle.,1
An employee was repairing the chipper with the guard off and the machine locked out and tagged out. The guard was replaced and the machine was started.  He heard a noise and again powered down the machine and took the guard off. He was leaning up and into the chipper to feel for vibration and his fingers got caught in the blades before the wheel had come to a complete stop amputating the fat pad and the fourth left fingertip.,0
"An employee was attempting to start the commercial riding lawn mower in the manual mode.  While starting the mower, the employee's got caught in the pulleys. Half the index finger was amputated and the middle and ring fingers were amputated to the first joint.",1
"An employee was performing maintenance work on a slide gate and chute in the head house of the elevator when he was exposed to some out of condition grain.  The employee began experiencing breathing problems, which resulted in hospitalization.",1
An employee was repairing an industrial fan and contacted the moving fan blades and suffered the amputation of the right index finger and a broken right thumb.,1
An employee was operating a brake press to bend a piece of metal. His finger was pinched on the deck of the press resulting in the amputation of the left ring finger just above the finger nail. It was reattached by a surgeon.,0
An employee was moving dirt with a skid-steer when it contacted a hard object. The employee's left leg got caught in the bucket resulting in a facture requiring inpatient hospitalization.,1
"An employee amputated the right hand index, middle and ring fingers while running a compound mitre saw.",0
"An employee lost his balance and fell in the parking lot, breaking his hip.",1
"On or about August 28, 2015, an employee was injured while loading dollies onto a truck.  The dollies became lodged on the lift gate and the employee lost part of his left middle finger trying to move the dollies.",0
An employee was struck by a motor vehicle while working in a highway construction zone.  Surgery was performed to relieve pressure/fluid on the brain.,1
An employee was operating a roll-off truck trying to load a container onto the truck when it dropped on and crushed his foot.,1
An employee injured his scrotum when he fell approximately six feet off a ladder and landed on rebar.,1
An employee was pushing three pieces of lumber directly into the in feed conveyor of a gang saw and cut his left index and middle fingers. The left index figure was amputated just below the nail while the left middle finger was amputated at the first joint.,0
"An employee stepped on a loose stone at the jobsite, rolled an ankle, and fell bruising a hip.",1
"An employee was gluing a piece under a bathroom sink when the sink fell. The employee stood up and attempted to step over the broken pieces, which cut through his sneakers and cut the bottom of his foot.",1
An employee was using a meat grinder. He turned the machine off and reached up under the guard and into die because he thought meat was stuck in the die.  The blade hadn't completely stopped and his finger was amputated just above the cuticle.,0
"An employee was on a ladder cutting an overhead beam. The ceiling beam collapsed and struck the employee, causing him to fall off and sustain a rib injury.",1
An employee was driving a flat bed truck and pulled over to adjust and secure the load (bales of film). The bales of film rolled on top of the employee breaking his femur and dislocated his hip.,1
"An employee was unloading panels of windows from one cart to another. The glass sheets got stuck together and fell on the employee, severely cutting the employee's right forearm.",1
"An employee changing filters on a filter system connected to a grinding unit dropped one of the filters into the filter unit. The impact inside the unit created a spark that ignited the aluminum dust, causing an aluminum dust deflagration. A fire ball discharged from the filter unit, contacting and causing second degree burns to the employee's hands.",1
An employee was sandblasting structural steel. He was using supply air from an air compressor when he felt lightheaded. He was hospitalized for carbon monoxide exposure.,1
An employee amputated a finger while rigging material. The rigging material slipped and the employee's finger got caught between the material and the steel beam.,0
"An employee was climbing off of a carpenter's bracket scaffold into a second-story window. He missed the window sill, hung from the scaffold decking, and fell to the ground. He suffered internal bleeding and was hospitalized. A personal fall arrest system was not worn at the time.",1
"On August 28, 2015, at approximately 6:45pm, while performing maintenance on a machine, another employee activated the machine after receiving verbal confirmation from the mechanic to go ahead. The maintenance mechanic suffered the amputation of his left thumb after it was pinched between a table and material near the entry end of the cap line.",0
An employee was trimming palm branches from an aerial lift/truck when the bucket contacted a 7200V power line. The employee sustained electrical burns on his back and was hospitalized.,1
"An employee's foot got caught in the bottom of a rolling 32-gallon trash can. She fell face first onto the floor, breaking her nose and dentures. She was hospitalized for stitches and a nose cast.",1
"An employee fell from the lookout tower outer balcony to the ground, fracturing their back, ribs, and skull.",1
"On August 29, 2015, at approximately 5:00 p.m., an employee was unloading material using a built-in hydraulic lift gate attached to the rear of the delivery truck. The material fell on and broke the employee's pelvis.",1
"An employee was carrying hot water into the freezer to remove ice. The employee slipped on ice, and the hot water spilled on the employee, causing burns to the face, neck, arms, and legs.",1
An employee was removing finished material from the machine when he tripped on the hoist hook on the floor. He broke his right hip.,1
"An employee was closing the store. The store was robbed, and the employee was shot in both legs.",1
An employee was working on an oil rig attempting to place a pulser into the drilling hole. A metal cable on the hula band being used to guide the pulser into the hole caught his thumb and amputated it at the first joint.,1
An employee fell approximately 20 feet to the concrete ground below while installing angle iron at a steel erection site. The employee suffered cracked vertebrae and a cracked pelvis.,1
"During a power outage, an employee was helping to clear a line of tree branches at an electrical substation using a pole pruner. A branch fell after it was cut, striking a live line and the employee.  The employee got shocked and was burned on his hands and torso.",1
"While transitioning from a boat to the dock, an employee's foot slipped between the boat and the dock. He broke three toes on his right foot and was hospitalized for surgery on his big toe.",1
An employee attempted to retrieve a piece of ceramic material that broke off into the tape laminator machine he was using. His right index and middle fingertips were amputated by the machinery.,0
"An employee was performing maintenance on a compressor unit. The compressor unit inside the building was shut off. The employee went to restart the compressor and a flash fire occurred. The employee suffered first and second degree burns to the hands, face, and arms, requiring hospitalization.",1
An employee was returning to base from a delivery when he was involved in a car accident. He was hospitalized.,1
"An employee was working on an oil drilling rig. While attaching a check valve to a vertical pup joint, the employee's right index finger was pinched between the two parts, amputating the fingertip.",0
An employee had completed a run of five fasteners on an upsetter machine when their left hand got caught in the dies of the machine. The employee's left-hand pinky and ring fingers were amputated.,1
An employee had just spilled gasoline on himself while fueling a chainsaw. A coworker was smoking nearby and caused the injured employee's pants to catch on fire. The employee was burned and required hospitalization.,1
The injured employee contacted an energized electric line while directing roofing activities from a forklift-raised basket. He sustained electrical burns on his hand and was hospitalized.,1
"While an employee was working underneath a truck to take out the drive shaft, a piece of metal fell into his eye. He was hospitalized for surgery.",1
"An employee was cutting plastic laminate when the laminate moved and pulled his hand toward the saw. His index, middle, and ring fingers were partially amputated.",1
"An employee was picking up trash on the roadway. She finished picking up the trash and got into the truck. A blanket in the truck blew out onto the road. She stopped the truck, pulled into the emergency lane, and got out to retrieve the blanket when she was struck by a passing pickup truck. She sustained extensive head trauma.",1
"On August 31, 2015, at approximately 11:30 a.m., an employee was helping a concrete pumper during backup to position the concrete chute for pouring. As the truck was reversing with chute extended, it appeared as if the chute was going to strike against a switch gear unit. The employee attempted to push the chute to give it more clearance, but the chute was locked in position and wouldn't move. His finger got pinched between the chute and the switch gear unit, and his left pinky fingertip was amputated. He was hospitalized for surgery.",1
"An employee suffered two broken ankles while hoisting a scale using an overhead crane. The scale had just been painted and was being lifted from a floor platform to be moved to an adjacent area for drying. The employee was raising the scale off the floor platform, taking up the slack of the rigging, when the scale slid off the platform and struck the employee's feet. Both ankles were broken from the impact.",1
"While exiting a tugger, an employee did not clear the loader track and tripped over it, breaking the right ankle.",1
"An employee was cutting a limb on the ground using a chainsaw. The tip of the saw popped out of the limb and struck the employee's left foot behind the big toe, causing a laceration.",1
"An employee was changing hot oil from a deep fryer. The oil was placed in a pot on the floor, and the employee tripped on the pot handle while walking over the pot. The employee contacted the hot oil and sustained second degree burns.",1
"While setting up the railings on a frac tank, an employee fell from the steps leading to the top of the tank to the ground, breaking his arm.",1
"An employee was hospitalized with a broken hip after falling to the floor at work on August 31, 2015. The injured employee required surgery.",1
"On August 31, 2015, an employee was cutting or clearing a tree for the company owner when he was struck by a falling limb, which gashed his head and injured his ribs. He was hospitalized.",1
An employee was walking on the roof and fell 8 feet to the ground. His head struck the ground and he sustained injuries requiring hospitalization.,1
"While coming down a step ladder, an employee lost her footing on the bottom step and hit a door frame. Due to the impact, she injured the right side of her back.",1
"An employee was attempting to pull a piece of plastic from a grinder plate. The employee's finger hit the rotating plate, resulting in a fingertip amputation.",0
"An excavator backed over an employee's left foot, resulting in surgical amputation.",1
"An employee needed to access a trailer to untangle a strap. While climbing a 4-foot ladder he lost his balance and fell to the floor, breaking a vertebra in his back.",1
"An employee performing preventative maintenance was checking a roof vent. She removed the vent top and shut off the vent. Before the vent belt had stopped moving, her finger got pulled in between the pulley and belt. Her left pointer finger was amputated below the nail.",0
An employee was being trained on the fryer grill when a can of cooking spray that was left on top of a char-broiler exploded. The employee was burned and hospitalized overnight.,1
Two employees in a lift were installing a window when they fell approximately 11 feet to the ground. They were not tied off at the time.,1
An employee was wearing work gloves while operating a vertical milling machine to fabricate a tube. The employee attempted to adjust the tube in the machine with his left hand when his work glove got caught on a set screw. His left little fingertip was amputated; there was no bone loss.,0
"On the ground level of the methyl acrylic acid (MAS) unit, an expansion joint became over-pressurized and exploded.  An employee in the area came in contact with MAS. One employee received chemical burns on his face, left arm, left mid-back, and left shoulder and was hospitalized.",1
An employee fell approximately 13 feet after stepping out onto a 2x4 while pulling wire. He sustained fractures to his left ankle and right leg.,1
"An employee was adjusting the forks of a forklift when the fork settled into position, crushing his finger. It was later amputated.",1
"At approximately 2:00 PM on 8/31/15, an employee was trying to retrieve the tip of a plunger that fell into a molten metal receiver. As he reached to retrieve the plunger, molten metal contacted and burned his left hand, requiring hospitalization.",1
"An employee was transferring two metal bins half full of product to the mill area for production using a forklift truck. As he exited the truck to open the bin door, the bin fell on top of him, crushing the lower half of his body and breaking one leg.",1
"While an employee was moving a small pile of hot material with a bobcat, a flash of steam entered the cab of the bobcat. The employee exited the cab and tripped into a pool of hot water, receiving first and second degree burns and requiring hospitalization.",1
"An employee was filling concrete mix bags on the spout 
at the Old Castle/Anchor Concrete facility. The employee's finger got caught between the metal arms on the spout and the rubber bumpers, amputating the left index fingertip and nail.",0
An employee was observing empty shackles on the line to see if any required replacement. A high-pressure water hose was accidentally discharged into the throat of the injured employee by a coworker who was removing the hose from the wall hook. The injured employee suffered a laryngeal laceration and air in the neck.,1
"While on his way back to the work office in the passenger seat of a vehicle, an employee suffered dehydration.",1
"An employee was standing between pallets next to a wall. A pallet-jack operator, who was trying to drive around another worker, struck the pallets, which in turn struck the employee and fractured the right ankle.",1
An employee was bitten by a rattlesnake.,1
"An employee was preparing to drill a hole in wax paper using a foot-operated paper drill machine. She placed a stack of paper in the machine using a block to hold the wax paper in place. When she pressed the foot pedal, the machine drilled the tip of her right index finger, causing an amputation-type injury.",0
An employee was riding on the back of a yard truck and got pinned between a trailer and the truck.,1
"An employee was performing maintenance on a broach machine. The machine cycled while his hand was inside, amputating his three right-hand middle fingers. The machine guard was not in place at the time of the incident.",0
"An employee operating a dump truck was emptying a load of dirt. The dump truck tipped over, and the employee suffered broken ribs, blood clotting, and lung issues.",1
"An employee was installing water lines for PA American Water when he experienced dehydration from the heat, requiring hospitalization.",1
"An employee was removing 1"" piping from a reactor vessel for cleaning purposes. While removing the piping with a wrench tool, nitric acid leaked from the system and caused chemical burns to the employee's face and both arms.",1
"An employee was doing iron fabrication work. While working on a circular saw, the blade ""kicked"" back the piece of flat strap iron, injuring the employee's left-hand middle finger. The injury resulted in an amputation (bone loss) along the fingertip.",0
"On September 1, 2015, an employee parked his semi truck in the shop on the cement floor for servicing. He was going to lift the truck onto jack stands by first lifting it with the jack lift. While lifting the truck, the employee got down to the floor level to look beneath it. The handle of the jack lift fell, striking his left-hand little finger against the floor and resulting in a fingertip amputation.",0
An employee was struck by a car in a crosswalk while walking between buildings at the hospital. The employee sustained back and spine fractures.,1
"An employee was tightening a clamp on the top of a mixing drum. The drum moved, and the employee fell more than 6 feet to the ground below, breaking both ankles and requiring hospitalization.",1
An employee was performing pipe maintenance work while exposed to high temperatures. He suffered heat exhaustion and was hospitalized.,1
"An employee was responding to a call of the A/C unit inside the attic not operating. She fell approximately 8 feet to the floor below through an open hatch in the attic, breaking her ankle and sustaining a head injury.",1
An employee was climbing into a bulldozer when wind caused the door to shut on and amputate his thumb.,0
"An employee was assembling a side belt driven conveyor. While checking the motor during the assembly, he noticed a clicking noise. He inspected what was causing the noise while the machine was running. His hand slipped while using a hand tool to adjust the chain that runs the motor, and his thumb went in between the chain and gear. He sustained a partial right thumb amputation.",0
"Employee was walking near the loading dock at a Giant Eagle Store. He tripped over the dock lowering lever, fell, and broke his leg, requiring surgery.",1
An employee was operating a chop saw to cut pieces of aluminum. He was holding a piece of aluminum in place while making a cut when his right-hand thumb contacted the saw blade. He suffered a partial amputation of the thumb.,0
"An employee was readjusting a sensor that controls tool pick up and tool changes. While he tried to check the position of the sensor, a coworker operated the Onsrud machine. The hood and airlines were not reattached. The back bush would not operate without the airline, so the injured employee attempted to hold up the back brush with his hand. The machine's platen dropped to pick up a tool; when it ascended, it caught the employee's thumb between the two platens, severely lacerating and fracturing it.",0
An employee was tearing off roof when his finger got pinched between a piece of plywood and a piece of machinery that was not in use. His left index finger was amputated.,1
An employee was repairing the coke oven door and pinched a fingertip behind the door latch resulting in the amputation of the fifth digit fingertip.,0
"While attempting to clear a jam in a machine, an employee was struck by the compression cam, injuring her forearm. The machine was not shut down at the time.",1
"A maintenance employee was in the laundry room lighting a water heater pilot. He had been using canned air to clear lint/dust from the area, then attempted to light the pilot, which caused a flash fire in his face. He suffered burns on his face and injuries to his eyes, requiring hospitalization.",1
An employee was hospitalized and treated for a infection from a blister that was caused by wearing safety boots.,1
"An employee working on the forming line stepped back into the path of a forward-moving forklift and was struck. The employee's right foot was injured, requiring hospitalization.",1
"While using a small lathe to polish a shaft, an employee's glove got caught. His arm was pulled under the part, breaking his forearm.",1
"An employee fell while walking between his truck's catwalk and the trailer to get bungee cords to secure the trailer load. He broke three ribs, punctured a lung, and broke his collarbone.",1
"An employee was loading plywood into a truck when his fingertip got smashed between the sheets of plywood. While pulling his finger out, the tip of the skin on his left ring finger tore off.",0
"An employee dropped his cell phone after parking a golf cart. When he went to pick it up, a snake bit his right index finger.",1
"On 09-01-15, at 01:45 AM, an employee went to retrieve a resident's call light. She tripped and fell over the resident's floor mat and was hospitalized.",1
An employee was walking when she fell and broke her hip.,1
"An employee was attempting to clean a machine. While trying to clear chips away, his glove got caught and his left hand was pulled into the cutter, fracturing and lacerating his left hand and wrist.",1
"An employee was climbing a ladder to reach the area where he was going to start anchoring the truss. He grabbed a nail gun that was hanging from the truss. It slipped from his hand and discharged a nail into his right leg, causing a puncture wound.",1
An employee was assembling testing equipment. The employee's left index finger got caught between a nut and an impact wrench and was amputated to the knuckle.,0
"An employee was backing out of a flatbed truck. He lost his balance or slipped and hit his head on the ground, suffering a concussion.",1
An employee fell off an 8-foot step ladder while installing ductwork and sustained a compound fracture to his right ankle.,1
An employee strapping down cargo on a flatbed trailer slipped from the ratchet socket and twisted his ankle.,1
"An employee was framing using a nail gun. A nail from the nail gun punctured his left leg above the knee, requiring hospitalization.",1
"An employee operating a pallet jack went to drop off some pallets. He looked backwards and ran into a guard rail, fracturing his left leg.",1
"An employee placed scaffold planks on scaffold tiebacks to create an elevated walkway above two sidewalk sheds. While traversing the walkway, the employee lost his balance and fell between the planks, bruising the inside of his left arm. He was hospitalized.",1
"An employee attempted to replace the belt on an HVAC unit. The belt, which was still rotating, caught and amputated the employee's left index finger between the belt and pulley. The cover guard was not in place at the time of the incident.",1
"An employee was stepping out of a material hoist when the hoist was struck by another piece of equipment. This caused the overhead protection on the hoist to collapse and strike the employee, who suffered a broken arm.",1
An employee was prepping his merchandise before loading it on a truck for delivery. He pulled his lower back muscle while shrink-wrapping a loveseat and was hospitalized.,1
An employee was standing at the entrance door of the valet parking office with his left hand resting on the hydraulic door cylinder while he was talking to co-workers. His left ring fingertip was pinched and amputated by the hydraulic cylinder arms when another employee opened the door to enter the office.,0
An employee passed out while repairing a tree trimmer. He was hospitalized for heat-related dehydration.,1
"On 09/01/2015, at approximately 08:55 a.m., an employee was preparing to open the window section. She retrieved her money from the safe and placed it at the counter and then returned to the safe to secure her compartment and close the safe door. Her right thumb was smashed by the safe door as it closed. The bone was severed and the thumb was attached only by the skin. Her thumb was reattached at the hospital.",0
"An employee was hanging string-line while constructing a wall. The employee's foot went between the forms and was lacerated by the wall ties, requiring surgery to repair the cut tendon.",1
An employee was manually moving a shelving unit in the pharmacy when she experienced numbness in her left arm.,1
"An employee was operating a carton filler machine when the machine began to jam. While attempting to clear the jam, the employee's hand contacted the moving chain conveyor system. The employee's left-hand thumb fat pad, first index finger knuckle, and middle finger middle knuckle were amputated.injuring his head",0
"While walking to the restroom, an employee slipped and fell to the ground, fracturing her hip.",1
"While moving a pole with a bar, an employee experienced back pain.",1
"An employee was washing out a tank with hot water that was about 130 to 140 degrees. The hot water scalded his back, resulting in third degree burns.",1
"An employee was performing preliminary work before siding work when a guardrail gave way, causing the employee to fall from a third-story platform to the ground. The employee broke both legs.",1
"An employee was repairing a commercial roof when he stepped off a small drop and lost his balance. He grabbed onto the hot mop cart to keep from falling and he was splashed with hot asphalt, sustaining burns to his head and back and requiring hospitalization.",1
An employee suffered a severe laceration to three fingers while cutting OSB boards on a table saw in the research and development shop. The table saw blade was not guarded at the time of the incident. The employee was hospitalized overnight.,1
"An employee was handling a belt and pulley system machine, attempting to get the pulley to move, when his right-hand pinky finger got caught in the belt. His finger was dangling, and most likely suffered an amputation. The guard was not in place at the time of the incident.",1
An employee's right femur broke when a vehicle he was lowering off of a tow truck rolled into him and pinned him against a wall.,1
"An employee was using a self-propelled lawn mower when he slipped and fell. His left hand went under the mower, resulting in middle and ring fingertip amputations.",0
"An employee was standing on the back of a truck waiting to collect trash when he fell off, hitting his head on the pavement.",1
"On September 2, 2015, an employee was refilling a hole in the ground using his foot when he stepped on a screw. The injury became infected.",1
An employee suffered an open fracture and amputation of the tissue of the right index finger when it got caught between the form station and vacuum seal while troubleshooting a form/fill/seal machine.,1
"On September 2, 2015, an employee was mopping/cleaning a church floor when she slipped and fell on the wet surface, striking the back of her head on the floor. She sustained serious head injuries and required hospitalization.",1
"An employee was examining electrical boxes to investigate a partial power loss within the facility. An arc flash occurred, and the employee suffered burns to the face, throat, and hands.",1
"On September 2, 2015, at 10:30 a.m., an employee was in an elevated man basket approximately 20 feet above ground, stapling the copper ground wire to a utility pole, when he received an electrical shock through his right shoulder and left hand. He was hospitalized. PPE equipment was not used at the time of the incident.",1
"On September 2, 2015, an employee was setting up garage door headers using a hand trowel when he began to experience cramping. He was hospitalized overnight due to heat exhaustion and dehydration.",1
"An employee exited his dump truck and approached a trackhoe operator. The trackhoe had a piece of concrete barrier in its grasp about 6 inches off the ground. The concrete barrier rolled onto the employee's right foot and leg, resulting in broken leg/foot.",1
An employee was installing cornices on the side of the house using an approximately 8-foot multipurpose portable ladder when he fell on his back with his gear. The impact of the fall caused the employee to go into a coma.,1
"On September 2, 2015, an employee was removing clay tile and installing a membrane on the roof of a building on the Capitol grounds. The employee began to experience cramping and was eventually hospitalized for possible dehydration.",1
"An employee was working from a 6-foot step ladder when the ground gave way. The employee fell off of the ladder and hit a concrete window well, breaking four ribs on his right side.",1
"On September 2, 2015, at 4:00 p.m., an employee had finished trimming some branches while suspended in a tree in a climbing saddle. He was descending when the knot that secured his lifeline to his safety harness clip came loose. He fell approximately 14 feet to the ground and suffered a compression fracture to his L-4 vertebrae in his spine, requiring hospitalization.",1
An employee was struck by a tractor trailer while it was backing up to another trailer to transfer product resulting in severe trauma to the abdomen requiring multiple surgeries.,1
An employee walked into a unit while walking and talking with a coworker; his right leg collapsed/fractured.,1
"An employee standing on an extension ladder was replacing a flag on a property when the pole broke, causing him to fall on his back. He was hospitalized overnight.",1
An employee was working along the roof trusses doing fire proofing work approximately 9' high when he fell through the trusses. He was hospitalized overnight with minor bruises and scratches.,1
"An employee was operating a steer loader, gathering parts to put together a feed bin. He pulled the steer loader up to the parts trailer.  There was a vehicle parked close to the trailer.  The employee got out of the steer loader, which was still running. His leg got jammed between the loader and the vehicle, resulting in a broken leg.",1
"A maintenance employee was changing a belt on a fan in a paint booth when the other fans in the booth turned on. This caused the employee's fan to spin, and his finger got caught between the belt and pulley. His left ring finger got crushed and was later amputated. His right index finger was injured and required stitches.",0
"A forklift operator was transporting a roll of material to the coating machine; their view was obstructed by the roll. As the forklift  approached the coating machine, the injured employee, who was standing at the machine controls, was struck in the lower right leg by the forklift and/or the material pallet. The employee sustained injuries to the lower right ankle and tibia bones.",1
"On September 2, 2015, at approximately 3:15 p.m., a maintenance employee was attempting to adjust a moving conveyor that was off track (not centered) when he tripped on dry clay that had fallen from the conveyor onto the floor and fell into a slow moving conveyor, fracturing his right arm and requiring hospitalization.",1
"An employee was descending a fixed ladder when he slipped and fell approximately 4 feet to the ground, injuring his back and left foot.",1
An employee was removing the belt from the pulley of an air handler when his fingers got caught between the pulley and belt. His right pinky fingertip was amputated. LO/TO was in place when this incident happened.,0
An employee lost two joints on their right middle finger while attempting to remove scraps from in and around a moving saw blade.,1
"An employee was cutting lumber with a Skill saw when he hit a knot in the wood, which caused him to lose control of the saw. As a result, the tip of his left thumb was amputated.",1
"After operating a hydraulic excavator, an employee began to experience heart-attack-like symptoms. The employee was hospitalized overnight for dehydration possibly due to heat.",1
An employee was using a chainsaw to clear vegetation from a customer's powerlines. He was hospitalized for severe dehydration and high levels of enzymes in the kidneys due to heat exposure.,1
An employee was driving a four-wheeled all terrain vehicle on a paved road. The employee was involved in an accident and received a brain injury.,1
"An employee was installing water irrigation piping and pivots. A pipe broke and hit the employee on the arm, breaking it and resulting in hospitalization and surgery.",1
An employee was mowing grass on a hillside when the lawn mower tipped over and rolled over him. He sustained a back laceration and internal bleeding.,1
An employee was looking at excess equipment in an area with limited visibility. He fell approximately 4 feet from the floor area to the asphalt rail-bed area and broke his a rib.,1
"An employee was preparing to run a new cable line from a utility pole to a house. The employee leaned a 28-foot ladder against the cable strand and was climbing or working when the staple fastener that was holding a strand support came out of the pole. The strand then fell 4 feet and the employee fell from the ladder, sustaining a serious head injury and other broken bones.",1
An employee was operating a forklift to gather merchandise. His right index finger got caught and amputated between the side of the forklift and the horizontal bracket.,0
"While prepping a pipeline prior to painting, an employee was bitten on the left middle finger by a rattlesnake. He was hospitalized for treatment.",1
"An employee was handling hides to get them in the deflesher when the ""gripper"" jaws opened and shut on the employee's left pinky. The employee sustained a soft tissue amputation of the left pinky finger.",0
"An employee was practicing riding on a pallet jack during training when he pressed the rabbit button instead of the horn, causing the pallet jack to move faster. The employee quickly dismounted the pallet jack and landed on the concrete floor, breaking his left ankle.",1
"An employee was delivering mail in a residential area when a dog chased after him as he crossed the street. He fell down a 5.5-foot retention wall embankment, breaking his pelvis and vertebrae.",1
"An employee was operating a forklift to move equipment, which became unstable and started tipping. The employee dismounted the forklift to steady the equipment, which struck the employee, resulting in a broken tibia and contusions to other parts of the body.",1
An employee became ill while operating the treatment plant at the Susquehanna River intake and was hospitalized.,1
"An employee was using a band saw to cut boneless pit hams in half to run them through a slicer. The band saw motor ran in reverse, and the employee's middle and ring fingertips were amputated.",0
"An employee was helping to install a wiring system into a residential property. The employee leaned a ladder against the side of the property's gutter system. A 3""x6' gutter cover dislodged and struck the employee in the arm, resulting in a 3-inch laceration to the bone. The employee was hospitalized with muscle and tendon damage.",1
"On or about September 2, 2015, at 5:45 a.m., a General Bakery employee's left thumb was amputated after it was caught between a rake tool and the side of the mixing tank.",1
An employee was working on the drive sprocket of a fryer when the drive chain grabbed his glove and pulled his finger into the sprocket. His finger was partially amputated.,0
"An employee was operating a brake press. She reached for a piece of metal and stepped on the press pedal. The press cycled and partially amputated her right middle and ring fingers, requiring surgery.",1
"Two employees engaged in a fight. One employee bit the injured employee's ear off, resulting in an amputation.",0
"On 9-2-15, an employee was making a bed. When she leaned over the bed, she felt a pain in her back. She was hospitalized with a back injury.",1
An employee fell approximately 10-12 feet while descending the ladder from the top of the railcar.,1
"An employee was loading bags of cement/asphalt onto a cart at Lowe's when a wheel on the cart broke. The cart collapsed onto the employee's foot, amputating a toe.",0
"A forklift operator was driving the lift back to the dock area when he struck the injured employee. The front side of the forklift hit the employee, then the right front tire ran over his foot.  He was hospitalized, where his foot up to his calf (left leg) was amputated.",0
An employee was hospitalized with left ankle and knee injuries when he fell through the skylight on the roof while trimming trees from around the building.,1
"An employee was loading parts into a machine when one twisted out of place. The employee tried to adjust the part with their right index finger, which got caught in the machine and was amputated just above the fingernail.",0
An employee delivering packages felt dizzy and later experienced cramping in the legs. She was hospitalized for dehydration.,1
An employee was nailing a form together to pour concrete in when he slipped and injured his back.,1
"An employee was training on the Columbia River, 0.5 miles west of Astoria, deploying oil boom on the aft deck when the boom line got stuck. The employee tried to free the line, but it was under tension.  The line came free, snapped straight, and struck his leg, fracturing his ankle and knee.",1
An employee was working to set a tool up to start torqueing when his pinky finger got caught between the hydraulic torque wrench and a part. He dislocated his pinky finger.,1
"An employee was dismantling a canopy with a wrench while standing on the cross braces. The employee lost their footing and fell approximately 14 feet to the concrete pavement, sustaining a head injury and requiring hospitalization.",1
"An employee was walking in a carpeted area.  She tripped where the carpet meets that tile at the rubber threshold, hitting her head and injuring her left elbow and both knees.",1
"An employee was bleeding pressure from a 4"" line.  In the process, a 2"" riser pipe ruptured, and the employee was struck in the right leg by flying debris. The employee's foot was amputated.",0
"An employee was conducting work on the 60-feet-high platform of an oil derrick, operating rigging to move piping into position. The employee became sick, vomited, experienced cramps, and was eventually hospitalized for heat-related health issues.",1
"An employee had just finished repairing the chip mill saw. While walking on the metal decking, he tripped on saw dust, hit the decking, and fractured his left femur bone.",1
"An employee was putting duct tape on a press machine. The operator jogged the machine, and the employee's finger got caught in the perforation wheel. The employee's left middle fingertip was amputated.",0
"On or about September 3, 2015, an employee amputated or partially amputated three right-hand fingers when they got caught in a sprocket while replacing a chain on the sprocket drive.",0
An employee's H2S monitor went off while he was delivering salt water on location. He eventually became ill and was hospitalized with respiratory problems.,1
"On September 3, 2015, an employee sustained a head injury. While he was looking at a piece of wood, he tripped and hit his head, requiring overnight hospitalization.",1
"An employee was outside the west dock changing spotlights, using a 6-foot step ladder. The ladder shifted and fell over with the employee on it. The employee sustained a separated right shoulder, broken toe, broken right femur, and facial lacerations.",1
"An employee was conducting an intervention with a client (patient). The client pushed her, causing her to fall and dislocate/fracture her right wrist.",1
An employee was filling propane cylinders for forklifts when a flash fire occurred. The employee sustained first and second degree burns on both sides of their torso and arms.,1
"An employee was standing in a sewer ditch while guiding a 10-foot steel pipe into position when the device holding the pipe slipped due to the plastic cover. The pipe struck the employee on his right tibia, causing a fracture.",1
An employee's arm was injured when it was caught between a chair and desk while he was working at his desk.,1
"An employee activated a pneumatic holding mechanism by foot pedal while placing a plastic door on a machine. The clamp pinched the employee's right middle finger between the clamp and the plastic door. When the employee pulled their finger out, the right middle finger nail and skin were removed.",0
"An employee was working on a front-end loader, taking the lift cylinder from the hood. The employee had the hood at a 90-degree angle. The hood moved and struck the employee on the leg, fracturing both bones in the lower left leg.",1
"While attempting to free a jammed leather piece from a mechanical press, an employee's left arm was crushed when the press activated. His arm was surgically amputated at the hospital.",1
"On September 3, 2015, at approximately 9:30-10 a.m., an employee was mowing with a zero turn mower. The employee dismounted the mower as it approached a chain link fence. The mower rolled and struck the employee, breaking his hip and requiring hospitalization.",1
"An employee was operating a stand-up forklift and preparing to put a pallet away.  He backed up the lift and the heel of his left foot made contact with the pallet rack behind him, causing crushing injuries to his toes.",1
"An employee worked on his knees on the subfloor of the IT room for two days. He developed knee pain, knee swelling, and fever.",1
"An employee was performing grounds keeping work when his eyeglasses fell to the ground. As he searched for them, a coral snake bit his left-hand middle finger.",1
"An employee loaded some roof trusses onto a flatbed truck. He started to band the load when one of the roof jacks fell and hit his head, resulting in internal bleeding and hospitalization.",1
"An employee was threading a machine with film onto a take-up roll. After changing over from job mode to run mode, the injured employee noted a problem with the film take-up roll and entered the area to address the issue. While doing so, his upper arm got caught in the ingoing spool. His upper arm broke and required surgery.",1
An employee using a power shear amputated a digit on his left index finger when his finger got caught between the shear blades.,0
"An employee was unloading a mold from Press 12 to a cart for transport. The cart got stuck on a fatigue mat and tipped over. The handle of the cart struck the interior of the employee's left foot, fracturing it.",1
"An employee was forming a footing for a water treatment plant. He was working inside a 4-feet-tall trench form and fell while crossing back over to the outside of the trench, breaking his right tibia and fibula.",1
"An employee was preparing rice for the Brandeis University catering service. When the rice was finished cooking, the employee pulled the hotel pan out of the cooker. The residual water left over from the cooking process splashed out of the pan and onto the employee's lower right arm, causing second degree burns.",1
"An employee was using a cutoff saw to cut a 10-inch concrete pipe when the saw kicked back, cutting the employee's collarbone.",1
"An employee was on an 8-foot A-ladder, looking over the company van, when he fell 3.5 feet to the ground. He dislocated his right knee and broke his left elbow, requiring surgery.",1
"On September 3, 2015, at 3:30 p.m., an employee's left pinky finger got caught in the lift chain of a forklift. The bottom third of his pinky finger was amputated, requiring overnight hospitalization.",1
An employee working in the pool area was hospitalized for infection.,1
"An employee was cutting a fallen tree limb when it became unstable, rolled, and knocked him off of a deck to the ground roughly 11 feet below. The employee sustained broken ribs.",1
"An employee was walking on a working surface when plywood fell over and struck his leg, breaking it.",1
"An employee fell while hanging baskets and struck their head, sustaining a concussion.",1
"An employee was heating a bag of soup. As she pulled the bag of soup from the kettle containing hot water, the bag of soup broke, causing first and second degree burns on her torso and left arm.  She was hospitalized.",1
"On or about 9/3/15, a temp worker injured her finger while operating a printing machine in the Cardboard Box Department.  Part of her finger had to be amputated.",0
"An employee was using a table saw to cut wood and attempted to clear a jam. When the employee cleared the jam, the saw activated and amputated his middle finger, severed his pointer finger, and mutilated his thumb.",0
"An employee was moving a resident's care bed. Her left pinky finger got caught in a pinch point between a closet door and the bed, crushing her fingertip. The fingertip was surgically amputated.",0
"An employee was driving a concrete buggy to move concrete when the buggy tipped, causing him to dismount the buggy. He landed on his feet on the concrete surface and fractured his hip.",1
"An employee was slicing cucumbers on the deli slicer. While attempting to retrieve a piece of cucumber, the employee's right hand made contact with the blade, resulting in a right fingertip and fingernail amputation.",0
"An employee was removing railing to convert the Pepsi Center floor from a basketball arena to a concert arena. The employee fell over the railing onto the concrete floor, dislocating his hip and suffering a concussion.",1
"On 9/4/15, an employee was injured when she tripped over another employee's foot and fell. She broke her hip and required surgery.",1
"An employee was installing a light fixture from a scissor lift when the railing broke. The employee fell about 10 feet, injuring their hip and breaking three foot bones. The employee required hip surgery.",1
"An employee was working on a third floor balcony, applying flashing to metal. The employee stepped through the floor joists, landed on the second floor balcony, and then fell to the first floor. The employee sustained broken ribs, a broken ankle, and a punctured lung and was hospitalized.",1
Employees were setting a canopy in place using a lull.  The injured employee used a fiberglass extension ladder to climb to the top of the 9'-high canopy to remove a sling. He fell from the ladder and fractured both wrists and two ribs.,1
An employee was cleaning the shredder with an air wand when the air wand swung back and struck the employee. The employee sustained a laceration from the throat to the ear and was hospitalized.,1
"An employee was moving furniture using a box truck with a hydraulic lift gate on the back. As he and a coworker raised the lift gate, he got off the lift and grabbed the side of the rail. The coworker began to operate the lift again, which caught and amputated the employee's thumb.",0
An employee sustained a broken ankle while stepping off of a four-rung ladder.,1
An employee was pouring concrete with a hose. Air got into the line and the hose struck him in the head and neck.,1
"An employee was transferring fuel to the gas station when a fire occurred. The employee sustained burns to 46 percent of his body, 3 percent of which were third degree burns to both arms and his back.",1
"An employee was coming down from an attic after delivering blown insulation materials using a 12-foot extension ladder. The employee fell approximately 9'10"" from the ladder to the concrete floor and fractured his back. The ladder did not have anti-slip feet.",1
"An employee was holding a slab of quartz. He tried to separate two slabs when the momentum and weight fell back on him. He then tried to push them back and step out of the way of the falling quartz, but he fell and hit his head. He broke his leg and required head stitches.",1
"An employee was going to hand a piece of material to a coworker. At that time, a coil pusher was activated. The employee's left foot was then crushed between the pusher arm and coil stock.",1
"An employee fell 10 feet from a mezzanine during welding operations, injuring their left shoulder tendon, cracking the L4 vertebra, and lacerating the left arm. A guardrail was not in place at the time of the incident.",1
"An employee was unloading railcars. While climbing down a railcar ladder, the employee missed a step and fell, fracturing both heels.",1
"An employee was disassembling a one-tier tubular scaffold. The employee removed the cross bracing first. When a coworker removed the planks, the scaffold members came down and struck the employee, causing back and pelvis bruises.",1
"On or about September 4, 2015, at 12:09 p.m., an employee was riding on the right rear step of a garbage truck during a right-hand turn. He was knocked off of the step when his shoulder contacted an illegally parked semi-tractor trailer, and he fell onto the street, hitting his head and knocking him unconscious.  He was hospitalized for a concussion and subdural hematoma.",1
"On or about September 4, 2015, an employee working in the small sort area injured the skin on her right middle finger when her hand contacted the conveyor belt.",1
"While working on a metal part on a brake press, the employee amputated the tip of his left index finger.",0
An employee injured her back while lifting packaging film.,1
"An employee was moving an oil field casing/pipe-related materials in and out of a pipe rack with a forklift. The pipes rolled down the rack and pinched/lacerated the employee's fingertip, which had to be amputated.",0
"On September 5, 2015, an employee was operating a wind-up machine when the light curtain failed. The overhead press roll activated and came down on the employee's head. The employee sustained a severe head contusion and laceration.",1
An employee broke a knee while climbing down a ladder. The employee was hospitalized and required surgery.,1
"On or about September 5, 2015, an employee in the garden department was assisting a customer when he began to feel unwell and passed out.  The employee fell to the floor, striking his head.  He was hospitalized overnight for heat exhaustion and dehydration.",1
"An employee was cleaning the deck and noticed a 10' piece of angle iron in the way.  The employee attempted to move the angle iron when the left side of it became wedged between concrete and a metal support.  The employee was standing next to an I-beam support structure.  As the employee tried to move the angle iron back and forth, he slammed his right hand between the angle iron and the I-beam, pinching his right pinky finger and amputating the fingertip.",1
"While cleaning the blade area on a hock cutter the ""double trigger"" was inadvertently activated resulting in the amputation of the left index finger to the first knuckle and a partial amputation of the tip of the middle finger.",1
An employee was threading yarn through the winder with his right hand on the aspirator. The traverse (yarn holder) grabbed his left pinky finger and lacerated it. His left ring finger was also lacerated. The pinky finger had to be surgically amputated to the first knuckle.,1
An employee was helping coworkers move a steel beam when the beam fell on the employee's left foot. The employee's left-foot phalanges were crushed and required surgery.,1
"An employee went into a facility and got out of his truck to check into the guard shack. When he went back to get into his truck, he missed a step and fell to the ground, breaking his left arm.",1
"An employee cooking in the kitchen opened a pot that was on the stove. The liquid spilled on the employee, burning their wrist and feet.",1
"Employee was performing underwater manufacturing of lead styphnate when initiation occurred, causing second degree burns and contusions to the employee's face.",1
An employee slipped and fell while walking into a patient's room and was hospitalized with a broken hip.,1
"An employee was driving through a construction zone after unloading production water at a disposal well when his vehicle veered off the road and crashed south of Killdeer, North Dakota, on Highway 22. He suffered back injuries.",1
"An employee was cleaning the entrance of the car wash station. While walking in the back where the drainage goes, he stepped in an opening and injured his knee.",1
"A firefighter was cutting line with the crew around spot fires in very steep terrain. A burning log rolled on top of the firefighter pinning him to the burning ground. The firefighter could not remove the log and neither could a crew member who tried to assist.  The firefighter suffered second degree burns to 23 percent of his back and third degree burns to seven percent of his right shoulder, chest, stomach and back of legs.",1
An employee injured his knee when he tripped on a rubber safety mat.,1
"On September 7, 2015, at about 04:00 PM, an employee fell from a 4- to 5-foot scaffold while cutting an aluminum structure beam with a chain saw. The saw kicked back, causing the employee to lose his balance and fall to the concrete floor. He sustained a head laceration and was hospitalized.",1
"An employee was cleaning an inclined conveyor that was approximately 9 to 10 feet off the ground.   The employee used a 10-foot A-frame fiberglass step ladder to access the working area. The employee's left hand got caught in the conveyor, resulting in a left wrist fracture. LO/TO was not performed at the time of the incident.",1
An employee was hospitalized with lower back pain after lifting patients at the hospital.,1
"On 9/7/15, an employee was cleaning out top flash and trimmings that had fallen on the floor beneath an auto-trimmer. His finger entered the stroke path of the lift cylinder, and his right middle fingertip was amputated.",0
"An employee was performing maintenance underneath a truck when the jack holding the truck into position slid/slipped, causing the vehicle to make contact with the employees right leg. The employee was hospitalized with a broken right leg.",1
An employee's right hand was injured while attempting to break a jam (conveyor bottle neck) on a conveyor.,1
An employee stumbled and broke his leg while pulling a load of water from a production tank.,1
"An employee was blowing off a roof during a roof inspection. The employee fell 25 feet through a skylight to the floor below, sustaining a hip dislocation and possible broken bones.",1
An employee standing on the back of a trailer during an offload lost their footing. The employee fell to the ground and rolled their right ankle. The employee was hospitalized with a broken ankle.,1
"An employee was unloading product from a stand-up forklift when the forklift began to slip on a wet floor. He attempted to press an emergency stop bar near the foot pedals, but his foot slipped and got caught between the forklift and a pole. His foot was lacerated and required surgery.",1
"An employee was removing a sleeve that goes around a bar weighing approximately 50 to 100 pounds. The sleeve was secured with four bolts; three were partially removed and one was removed completely. As he turned the sleeve, his left ring finger got caught between the sleeve and bar, causing a partial amputation.",0
"While making a delivery at a residential site, an employee lost consciousness and collapsed due to dehydration, requiring hospitalization.",1
"While moving a large, heavy-duty stand-up fan, an employee's right thumb was severely lacerated to and/or through the bone by the fan blade. The employee was hospitalized. The fan was running at the time of the incident.",1
An employee was punching holes in a quarter-inch angle iron when the die broke and shattered. A chip of the die impaled the employee's chest.,1
"An employee fell through a skylight while walking/working on the roof, sustaining multiple arm and leg injuries.",1
"After installing a new roof at the Kendall Square community complex, an employee on his way back to the shop started experiencing cramps in the legs and stomach due to dehydration.",1
"An employee was loading bar stock into the lathe when the bar stock became jammed. While he attempted to clear the jam, the energized clamp came down and pinched his finger, resulting in a right ring fingertip amputation (no bone).",0
An employee was removing sprinkler heads while working on top of a walk-in cooler. The employee fell and sustained a head injury that required staples and a possible broken shoulder.,1
"An employee fell through a skylight approximately 15 feet to the ground, sustaining two fractured vertebrae in his lower back, lacerations, and bruises.",1
"An employee was helping to install an elevator. He was lifting a counter weight frame while using a hoist. The rope being used got tangled in the cylinder. While attempting to straighten it, his hand got caught. He tried to withdraw his hand, and three fingertips were amputated.",0
An employee climbed a 6-foot ladder to trim a tree branch. The branch fell and knocked him to the ground. He broke his leg and fractured his skull.,1
"An employee was pushing a deep fryer back into place after cleaning behind it. One of the fryer wheels became caught when a loose drain cover on the floor shifted. The fryer and employee fell, and the hot cooking oil in the fryer spilled onto the floor and onto the employee. He received 3rd degree burns on his right hand and on both legs from the knees down.",1
"An employee was greasing a 2-inch valve with a high-pressure grease gun when the hose erupted in the employee's right palm, lacerating the palm of the right hand.",1
"An employee amputated his thumb, index, and middle fingers while operating a foot-controlled chop saw to cut stock.",0
"An employee was climbing a ladder to attach a metal jacket around a railroad car when the securement chain on the ladder came loose. The ladder became unstable and slid, causing the employee to fall and dislocate the left ankle. The employee required surgery.",1
"An employee fell from a ladder, injuring a hip and fracturing an elbow bone and ribs.",1
"On September 8, 2015, at 8:56 AM, an employee suffered a partial amputation of the right middle fingertip while wiping dust near the rotating shaft of a laminator machine.",0
"An employee was walking while carrying a tub of mail. The employee's foot got caught on all-purpose container webbing, and the employee fell to the concrete floor. The employee was hospitalized for a broken rib on the left side and a collapsed left lung.",1
An employee was using a sledge hammer to drive stakes or conduct demolition activities when he overheated and fainted.,1
An employee sustained second and third degree burns while attempting to clean a flat-top grill with combustible liquid.,1
An employee was installing gutters from a ladder when he lost his balance and fell approximately 7 feet to the ground below. He broke his wrist and lower back.,1
"An employee had just finished a delivery at a residential house and was descending the stairs from the property. While stepping downward off the stairs, the employee dislocated and broke their right ankle.",1
"An employee fell to the floor while walking down a hallway, fracturing their right knee, wrist, and shoulder.",1
"A maintenance employee was working on a snorkel lift that was up in the air. He reached down to retrieve something and steadied himself by placing his other hand on the sprocket. The sprocket moved and amputated his right thumb tip, including the nail. The lift guard was not in place at the time of the incident.",0
"On September 8, 2015, at 10 a.m., an employee was walking down the roof to get a piece of plywood to lay down. His fall protection yo-yo locked and caused him to lose his balance. He fell off the edge to the ground below in the building, injuring his head and requiring hospitalization.",1
"An employee hooked up a hose to unload sulfuric acid. After he hooked up the appropriate hose, he walked around the truck to make sure everything was in its proper place. He then came back and touched the hose to ensure that sulfuric acid was being transferred. When he touched the hose, it came off, and the sulfuric acid splashed all over him and contacted his neck. He sustained third degree burns to his neck and shoulder and second degree burns to his arm. He was wearing PPE at the time.",1
An employee was performing maintenance duties when a range bull got out of its pasture. The bull head butted her and broke her pelvis.,1
"An employee was loading a trailer using a powered industrial truck. When the employee exited the truck, it rolled forward and pinned the employee between the truck and the trailer. The employees ribs and vertebrae were fractured.",1
"An employee slipped and fell while walking to the water fountain, hitting her head on the floor. She injured the left side of her head and her upper neck.",1
"An employee felling a tree looked up at the tree being cut. A branch from the falling tree caught his wire safety glasses, knocking them off and allowing a branch to cut his eye. His iris/cornea was detached.",1
"On September 7, 2015, an employee's left ankle was swollen after working in the acetic acid unit to clear/de-inventory the purification section. He was eventually hospitalized for ankle blisters and chemical burns.",1
"An employee was changing a swab on a mud pump using a wrench to stroke the pump. The pipe wrench slipped and he fell backwards off the skid to the ground. His back and head struck the ground and he injured his chest. He sustained a head laceration, upper right bicep cut, chest contusion, and concussion.",1
"During moving activities, three employees unsecured and then lost control of the end piece of a gantry crane. The piece rolled out from under them and struck the injured employee's foot, amputating his right big toe and requiring hospitalization.",1
"An employee was driving a forklift when the load contacted the overhead lighting, dislodging it from the overhead trusses. The employee then attempted to secure the lighting fixture to prevent it from falling. He used a scissor lift to access the light and was in the process of securing it when he touched the fixture, receiving an electric shock and burns to the left ring finger, as well as left arm numbness.",1
An employee was cutting a watermelon with a knife when the watermelon rolled and caused the knife to slip. The employee's right middle finger was amputated.,0
"An employee removing metal flashing from a parapet wall was shocked when the metal flashing contacted a 7200-volt overhead power line, burning the employee's left wrist and right arm/hand.",1
An employee was operating a stand-up forklift near rack storage units. His hand got caught between the rear of the forklift and the stored material as he was reversing the forklift. He sustained a crushing injury and lacerations to his left hand.,1
"While setting a gearbox in the motor for a tank mixer, an employee's hand got caught between the gearbox and mounting plate. The employee's left hand was crushed.",1
"An employee was working on the bar straightening machine when the straightener jammed and was shut down. The bar went back and forth, then came back and crushed the employee's finger, resulting in amputation.",0
"An employee fell off of a large moving truck while moving furniture, sustaining a head laceration and dislocated shoulder.",1
An employee was checking on a heater-type coil in a refrigerator/freezer unit in the basement of the facility. The employee was working on the unit with two alligator clips in each hand while possibly standing in water; the plug was 110 voltage. The employee sustained a possible electrical shock.,1
An employee was on a ladder when it folded and fell to the ground. The employee suffered lacerations and a concussion.,1
An employee was using a 4-inch grinder to cut a piece of rebar when it kicked back and he cut his left hand on the inner part of the left thumb and his wrist on the grinder. He received a cut approximately 1/4-inch long and was hospitalized for surgery. Gloves were worn at the time of the incident.,1
"An employee attempted to correct a misaligned end shield on a press he was using for trimming. The press cycled, cutting his left hand and fracturing three fingers.",1
An employee was using a torch to heat up a stuck stud on the tank. The torch ignited methanol gas that was put in the tank the day before.  The employee was thrown back 6 to 7 feet and received second and third degree burns to the abdomen.,1
"An employee was replacing a hydraulic lift cylinder on a forklift. As he unbolted the oil line, the second stage of the forklift began to drop, lacerating and crushing his finger between the frame and the second stage. He was hospitalized for surgery.",1
An employee suffered from heat exhaustion and passed out while operating the concrete truck controls.,1
"An employee was working with a tire/wheel change-out machine for a large tractor tire. The tire flipped out of the machine on top of the employee, amputating his left-hand pinky finger and injuring his hand.",1
"While feeding wood into the notching machine, an employee's left pinky fingertip was amputated on the machine's infeed.",0
An employee preparing to move backhoe forks fractured his right femur when part of the forks fell on his leg. He also lacerated his right ring finger.,1
"An employee was fighting a fire in a remote area. The employee had an extra drip torch, which had leaked fuel. The residual fuel caught on fire, and the employee sustained second degree burns on the back of the arm, above the left elbow in the triceps area, as well as burns around both legs/sock areas.",1
"An employee was crating a window with a nail gun. As he switched the nail gun from one hand to the other, the gun shot a nail into his right leg.",1
"An employee was working outdoors installing a CO2 line at a restaurant. The employee exhibited heat stress-related symptoms, including shortness of breath and cramping, and was hospitalized overnight.",1
"An employee preparing meals at a residential home slipped and fell on the floor, fracturing a hip.",1
"An employee attempted to adjust the air pressure on the UBE machine while working on the packaging line. The employee's finger got caught in a chain and sprocket that was attached to the machine, amputating the right index fingertip.",1
"An employee fell into an 8-foot deep trench while trying to cross it, injuring his lower back and spine.",1
"An employee was patrolling the building/perimeter when the employee tripped and fell to the ground, breaking the right hip.",1
An employee was cutting board for an exhibit on a table saw when the board kicked back and struck the employee's abdomen.,1
"On or about September 9, 2015, an employee's finger was amputated while slicing meat with a meat band saw.",0
"An employee was sweeping next to the wash pad rail system around 7:40 a.m. An aerial lift (enclosed with tarp) used for abrasive blasting stopped to drive a short distance to a new area. The employee grabbed the tarp to move it out of the way, and the employee's foot got caught and was struck, requiring hospitalization.",1
"An employee was operating a metal pipe bender in the bender work area. The employee was attempting to adjust the bender when a coworker cycled the machine. The employee's left-hand pinky and ring fingers were crushed, and the distal phalanx of the left-hand middle and ring fingers were surgically removed.",0
"While replacing a gasket in a vibration fixture, a maintenance employee's finger got caught in a pinch point when the fixture dropped 1.5 inches. His index finger was amputated.",0
An employee fractured his hand while connecting a trailer when his hand got caught in the trailer's hydraulic cylinder.,1
An employee was cleaning the rubbers on the entry end of the slitter head when his arm was pulled into the machine. He broke his left-hand pinky and ring fingers and required a skin graft between his elbow and wrist.,1
An employee was using an alligator shear to cut a nickel alloy plate when his hand and thumb contacted the shear's nip point. The bone behind his knuckle was crushed/fractured.,1
"An employee was moving a new transformer into location. The employee leaned against the old transformer, which was still energized, causing metal to push into the energized bus bar. An arc flash occurred, and the employee sustained burns.",1
"An employee was machining a packing tube when a bushing on the bar came loose. The employee attempted to push the bushing back in place and his left hand got caught in the rotating bar, amputating his left index finger and fracturing the adjacent fingers. The employee was wearing gloves at the time of the incident.",0
"An employee was working on a crane motor. As the motor started, it backfired through the exhaust where the employee was standing. He jumped from the crane chassis to the floor (approximately 4 feet) and fractured his left knee. He was hospitalized.",1
An employee fell and broke her hip while descending from a ladder.,1
"On September 9, 2015, at 8:50 a.m., an employee's bare hand made contact with an energized heating coil in a rooftop unit, resulting in second and third degree hand burns.",1
"An employee was adding sealant to an air handler unit when the sealant container ruptured, injuring the employee's hands. He was hospitalized.",1
An employee was working from a sidewalk shed when he fell and broke his wrist.,1
"On 9/9/2015, an employee suffered a right ring fingertip amputation and fractured rib when a storage rack containing tires fell on top of him after being struck by his forklift.",0
"An employee was on the third step of a ladder tightening a plug on a boiler unit. He slipped and fell approximately 3 feet to the floor, lacerating his head, breaking a bone in his back, dislocating his right big toe, and bruising his elbow. He was hospitalized.",1
"An employee was cutting flooring material using a table saw. His hand slipped, and his right index finger and thumb were cut. The index finger and thumb tip were amputated at the hospital.",0
"At 10:30 a.m. on the production floor, an employee attempted to unjam one of the pads on the PAD machine. The blade on the machine amputated her left-hand index finger from the bed of the fingernail to the tip. She was hospitalized. The machine was still running at the time of the incident.",1
An employee was walking back to the production area after leaving the break area when his foot or the edge of his pants got caught onto a pallet causing the employee to trip and fall to the concrete floor.  The employee broke a hip as a result of the fall.,1
An employee was operating a yard tractor when he tripped and was run over by the tractor. He sustained a chest and abdominal injury.,1
An employee suffered from heat exhaustion while cutting 2x4's on a bridge.,1
An employee using the restroom slipped and tore her ACL.,1
"On September 10, 2015, an employee was attempting to close a door to a patient's room while the patient was trying to pull it open. The door slammed shut and the employee's right index finger was caught between the door and the door jam, crushing his fingertip. The fingertip was later surgically amputated.",0
An employee was carrying plywood and suffered from heat exhaustion.,1
An employee was removing the cutter head of an auger when his left arm got caught between the auger and the casing. His left arm was amputated.,1
An employee was moving a post-con cart when her foot got caught in the cart webbing. She fell onto the ground and hurt/broke her left hip.,1
An employee fell approximately 8 feet and hit his head on the ground while descending an extension ladder. He fractured the orbital bone in his head.,1
"While adjusting the jack foot pad for an equipment trailer, an employee's left index fingertip was amputated as he was aligning cotter pin holes.",1
An employee was performing maintenance on the motor to a raw incline auger when their fingers were caught between the belt and pulley on the motor. LO/TO was not performed. The employee suffered an open left pinky finger fracture.,1
"An employee was adjusting an elbow machine when their left-hand fingers got caught in the machine's clamp, dislocating and fracturing the second and third fingers.",1
An employee and a coworker were at servicing a truck. The employee was under the truck close to the fuel tanks when the coworker started the truck. The truck moved forward and the rear tandem caught the employee and drug him an unknown distance.,1
"An employee was using a grinder to remove tack welds from a 12"" by 4.5"" steel plate. While grinding, the steel plate broke free and struck the employee's left eye. The employee sustained a left cheek and left eyebrow laceration, as well as a fractured left orbital eye socket.",1
"An employee was checking the gauging on an upper die shoe. The upper die shoe slipped/fell off the pins, and the employee turned and hit the cutting edge of the die. The employee sustained a left pointer finger soft tissue amputation.",0
An employee was helping to set dies when his left hand got struck by the die as it was being lowered into the parallel. His left-hand middle finger was injured and had to be amputated to the second knuckle.,0
"An employee cutting manufactured parts with a vertical band saw lacerated their left index finger, requiring surgery.",1
An employee was attempting to clear a jam on a machine when the blade came down and cut her left middle finger.,0
"An employee was attempting to repair a cable from a ladder. As he descended, the ladder moved and he fell. He got caught between the steps and broke his right leg.",1
An employee was cutting a doorway frame using a saw when the frame fell onto the employee and struck the back of his hand. The nails or other protrusions punctured the skin on his right hand. He was hospitalized.,1
An employee was placing sheeting over the stairway to a basement when he lost consciousness and fell 8 feet over the exposed edge to the lower level. He injured his head and was hospitalized.,1
"An employee was ensuring that material was not in a bind while being processed on a conveyor. The employee's arm got pinched between the conveyor roller and the underside of the conveyor belt, sustaining skin abrasions.",1
"An employee was attempting to remove the lid from a ladle that contained molten metal. The molten metal splashed onto the employee, burning his right arm, right hand, and back.",1
An employee was attaching clamps to a hide at the side puller station on the kill side of the plant when his left thumb got caught in the clamp. He sustained a left thumb avulsion.,1
"An employee tripped over a linen cord, breaking both wrists and fracturing her knee. She was hospitalized for surgery.",1
An employee tripped over a floor mat and fell to the ground in the administrative hallway. The employee was hospitalized for a tear in the right knee ligament.,1
Half of an employee's right pinky finger was amputated by a lumber planner he was operating.,0
An employee fell off the steps while he was working with a shear press machine on the platform. He fractured his right hip.,1
"An employee was in the cleanup/pump room delivering tools and helping to change belts on a pump. While helping to remove an old guard from a machine to put on a new one, he amputated his right-hand middle and ring fingertips.",0
"On Sunday, September 6, 2015, a forestry technician (hot shot) had physical training.  After the training, the hot shot felt more tired than usual for a few days.  On September 9, 2015, the hot shot had his left knee examined for a previous injury.  During the exam, the physician noticed swelling in the arms and recommended blood work. The blood work indicated a muscle injury due to physical training in hot conditions and the hot shot was admitted to the hospital for treatment in the morning on September 10, 2015.",1
"An employee was breaking down mail when her foot got tangled in plastic straps, causing her to fall and fracture her right shoulder and right knee.",1
"On September 10, 2015, at 1:40 PM, an employee's right ring finger was partially amputated by a wire straightening machine. He was checking the gears when one of the tracks fell and cut off his fingertip.",0
An employee was overcome by carbon monoxide from contractors operating a propane-powered burnishing machine within the store.,0
An employee was working on the front corner of the house tearing off drip edge. He had a seizure and fell seven feet off the roof resulting in possible broken ribs. Fall protection was not worn.,1
"While climbing a fixed steel ladder from a 16-feet-deep dump pit, an employee fell 6 feet from the ladder to the steel floor of the dump pit, breaking two vertebrae and both ankles and requiring hospitalization.",1
"An employee was cleaning windows inside a Dollar General Store when an unknown assailant entered the store, pulled out a knife, and cut the employee.",1
"An employee was standing on top of an excavation area flagging a trench box in when the ground gave way. The employee fell inside the trench, hitting the left side of his head and back, breaking four ribs, and bruising his head.",1
"An employee changing out a drill bit on a machine when he realized that drill bits were left inside the machine. The machine was energized at the time. While attempting to retrieve the drill bits, his left hand was struck by a moving drill.",1
"On 9-10-15, an employee's finger was cut while inspecting a part. He was eventually hospitalized when the cut became infected.",1
"On 9/10/15 an employee was using a table saw.  While cutting shelving, he amputated the ring finger on his left hand.",0
"An employee was using a lashing rod to bend a piece of metal when it sprung backward, struck him in the jaw and fractured it. He fell to the ground where he also sustained lacerations to the head, eye, and neck after contacting the metal deck.",1
An employee was hospitalized after suffering a crushing injury when a rolling rail car ran over his toes.,1
"An employee was sanitizing a chocolate enrober. As he attempted to unjam the chocolate pump, the pump started and amputated his left index fingertip.",0
The employer is contracted for all the ground and foundation work for a new grain facility.  On the day of the incident the employer was having gravel delivered to construct a road.  One of the side-dumper trucks got stuck in the ditch across from the site.  In an effort to pull the truck free the employer used one of their Caterpillar D6 dozers and two 16 foot long 5/16 inch chains.  After the first unsuccessful attempt to pull the tractor trailer free the dozer operator attempted another pull. The chain snapped flying backwards towards the dozer where the hook end crashed through the rear window and struck the employee. The employee was taken to the hospital for facial reconstruction surgery.,1
"An employee was taking a forklift to a charging station. When he stepped off the forklift, which was still moving, his foot got caught between the forklift and a rail. His left foot was fractured.",1
An employee tripped and fell fracturing her left hip.,1
An employee was driving a forklift and struck a steel beam in the warehouse resulting in multiple injuries to his right foot.,1
"An employee was installing a metal roof and fell 35 feet resulting in a broken arm, pelvis, and femur. The employee was hospitalized.",1
An employee was rolling a metal piece on an Arcotech rolling machine and got his right ring finger caught between the piece of metal and the roller. The employee's right ring finger was crushed resulting in an amputation.,0
An employee was operating a mule (ATV) around the fish farm. The employee attempted to stop the ATV with a foot and broke the foot.,1
"An employee was pulling on a wild grape vine that was up in a tree. The grape vine broke and he fell to the ground, breaking his tibia and fibula.",1
"An employee was pressure washing a house and was stung by bees. Due to a bee allergy, the employee was hospitalized.",1
"While cleaning silage off a truck's windshield during harvesting silage operations, an employee injured his ankle when his foot got caught between the bumper and the hood of the truck, resulting in surgery and hospitalization.",1
"On 9/11/15, employees were washing the print roller at the end of a shift. An employee bumped the right elbow on the diamond plate platform of the printing press; skin was not broken. The employee went golfing the next day and the elbow was swollen. The employee was hospitalized with an infection in the right elbow.",1
An employee was walking on the roof behind a buggy and was putting down stone when he hit his head on the buggy handle and fell on the roof. He injured his vertebrae.,1
"An employee was cutting wood trim on a table saw. When the employee reached for cut scraps, their left ring finger contacted the rotating saw blade.  The employee's left index fingernail was amputated.",0
Employee suffered a right pinky finger amputation while using a metal stud cutting tool for carpentry work.,0
An employee was walking a dog. The dog lunged forward to chase a lizard and the employee lost balance and fell breaking her left femur.,1
A security officer was on patrol at the country club when he lost his footing and fell into a ditch breaking his leg.,1
"An employee was cleaning with a water jet. He lost his balance and was sprayed with high pressure water. 
He suffered a cut on his mouth and skin abrasions on his neck.",1
"An employee was removing shoring when a piece of plywood fell on him, breaking his finger and collarbone and requiring hospitalization.",1
"An employee was struck by a forklift and received an injury to the right leg at approximately 6:00PM on September 11, 2015. The employee was transported by ambulance to the hospital, received emergency care and was discharged.",0
An employee suffered first and second degree on the face as result of an arc flash while relocating overhead power lines.,1
On or about 9/11/2015 a Department of Veterans Affairs employee was folding letters and putting them into envelopes and sustained a paper cut on his left thumb.  The cut became infected and the employee was admitted to the hospital for treatment.,1
An employee reached into a bowl chopper while the machine was running and amputated three fingers on his right hand.,1
"The employee was cutting a 1/4 inch piece of plastic liner with a hand held grinder. The grinder jumped, lacerating the employee's left middle and index fingers.  The employee was hospitalized.",1
"An employee was driving an ATV when he lost control of his vehicle and ran six feet off the road and hit a tree. The employee suffered several injuries including a broken right femur, a possible broken hip or pelvis and a cracked rib.",1
An employee was replacing a telecom connection. The employee fell from an extension ladder and fractured vertebrae.,1
"An employee performing custodial work (sweeping in stairwell) misjudged his step and fell striking his head on September 12, 2015 at 2:30 am. The employee was admitted to the hospital. The employee sustained contusions and lacerations to the head.",1
"With the assistance of other employees, the injured employee was relocating a tufting machine. The employees were in the process of leveling the machine by inserting metal leveling plates under the machine. The machine was being lifted by a 10-ton capacity pneumatic floor jack. The jack slipped and the tufting machine dropped trapping the employee's hand underneath. The employee suffered two fractured fingers.",1
An employee was stacking batteries on a pallet in the fleet garage. He lost his balance and fell to the concrete floor resulting in 2 hip fractures.,1
A material handler on the motorized sheet lifter picked up a pack of material with the lifter and was moving the pack around when the pack struck a fixed object. The stack then shifted and caught the worker's fingers between the object and the stack injuring three fingers. The pinky finger was partially amputated from the tip to between the first and second joint.,0
"An employee was preparing to fabricate a clamp for a pipe. As he was rotating the pipe, it pinched his left finger to the knuckle resulting in amputation.",0
An employee tripped and fell while pushing a bin with merchandise.  The employee was hospitalized.,1
An employee was coupling two 28 feet long trailers when his middle finger was pinched between the pintle hook.,1
An employee was injured while transporting equipment with a wagon. The wagon tilted over and the seat tracks fell onto the employee's leg resulting in bruising and crushing injuries.,1
At approximately 1030 hrs. on 12 September 2015 an employee suffered a broken hip when a bovine he was processing pushed the employee into a cattle gate. The employee was admitted to the hospital for his injuries.,1
An employee suffered the amputation of the right index fingertip when his finger was caught between the bumper of a truck and a jack.,0
"An employee was descending a caged ladder. Due to earlier rain, the ladder rungs were slippery. The employee's foot slipped off a ladder rung and the employee fell an estimated 20 feet breaking the right ankle.",1
"While attempting to rope a calf, an employee got his finger caught in the rope and amputated.",1
An employee was scraping loose paint on a railcar door. The employee's hand was caught in the door when it closed unexpectedly. The employee sustained a fractured right wrist.,1
An employee was assisting the doctor with a blood draw on a cat and was bitten on the thumb.,1
A steel beam tipped over and fell onto an employee's right ring and middle finger causing an amputation above the knuckle.,0
An employee was working in the meat department and broke bones in the right foot.,1
"An employee was being lifted on a pallet with a forklift when the pallet broke and the employee fell approximately 8-10 feet to the concrete below. The employee suffered a brain bleed, fractured eye socket, broken wrist and broken ribs.",1
An employee was walking around a machine and tripped over an electrical cord of a glue pot splashing hot glue onto the employee's leg and foot.,1
An employee was descending a fixed ladder and lost his grip. He fell 10 feet to the ground below and fractured the left heel and L5 and L7 vertebrae.,1
An employee tripped over the curb while carrying items and injured the face and neck requiring hospitalization.,1
An employee was climbing a ladder to access the roof. The employee fell approximately 16 feet suffering a concussion.,1
"The employee was lowering some rebar into a 24"" hole/cage. His left ring finger got caught between the cage and rebar amputating the fingertip.",1
An employee was climbing off a baker's scaffold when his foot slipped and he fell breaking his femur.,1
"An employee was crossing the street and was struck by a taxi. The employee sustained a broken nose, a dislocated left shoulder, a broken femur, a sprained right ankle and needed 18 stitches on his head.",1
An employee was knocked off of a ladder when a Genie aerial lift lifted a waste bin. The employee suffered a head contusion and chest injury.,1
An employee was trying to clear a jam in the shaker screen machine. His shirt sleeve got caught in the equipment resulting in a fracture of his arm in three places.  The employee will need surgery to repair the fractures.,1
"An employee was going up a ladder to do a pre job assessment of the air conditioning system.  When he was about 4 feet from the ground, the employee's foot slipped and he lost his balance.  He fell, hitting a movable conveyor on the way to the ground. He hurt his back, head and spine.",1
"An employee was assisting a co-worker to lift a handicap passenger into their seat on board a 737 aircraft.  After bending over and lifting the passenger's feet, the employee indicated her back was hurting.",1
An employee was operating a pallet lift device in reverse. The employee jammed the left foot between the fork truck housing and the loaded pallet behind.,1
"On or about September 14, 2015 between 3:30 pm-4:00 pm, an employee operating a chop saw in the Cut Shop had their right hand amputated (four fingers and half of palm).",0
An employee was pulling electrical wire onboard a marine vessel. A large hole was cut into the main deck to place the engine into the vessel. The employee fell into the hole breaking ribs and the right wrist.,1
An employee slipped on oil and fell. The employee received minor burns on hands and was hospitalized.,1
"The employee was collecting recyclable materials from the curbside. When the employee exited the vehicle, his foot was run over by the front passenger tire of the truck breaking it.",1
An employee was burned when a kettle of boiling water tipped over and spilled onto his feet.,1
An employee was standing on a three-step step ladder attempting to remove a radiator from the shelf and lost his balance falling to the floor fracturing a lower lumbar disc.,1
An employee was test driving a scooter and had an accident resulting in two fractured ribs and hospitalization.,1
An employee received a severe compression fracture to his back (L1) while buffing a floor. The employee had been polishing the floors near the end of the shift and felt the sudden onset of severe back pain causing him to fall backwards.,1
An employee was operating a punch press when the die pulled the part in causing her left index finger to be amputated.,0
An employee was putting trays of chicks into the tray washer. The employee reached into the tray washer machine to remove a chick when his glove got caught on the chain and sprocket. He suffered lacerations to his right hand between the index and middle finger.,1
An employee was impaled by copper tubing while walking between two machines on the copper tubing line.,1
A worker was attempting to install a safety pin in the self climbing form work system. The platform came down on his hand before any safety pins were put in. The worker's hand was crushed resulting in finger amputations.,1
"On September 14, 2015, an employee was working from a ground level scaffold. The employee stepped on a section of plywood that was covering a steam pipe. Upon contact, the pipe sprayed hot water (198 degrees) onto the employee's left foot. The employee was treated for second and third degree burns to his foot and released. The employee returned to work with restrictions. On September 22, 2015, at a follow-up appointment, the physician noted the foot was not healing.  At approximately 8:00am, the employee was admitted to the hospital to have a skin graft done to his left foot.",1
"An employee was at the shop warehouse using a come-a-long to pull a tube bundle inside a condenser shell. The come-a-long hook was attached to a metal lifting lug welded onto a shell. As the employee was pulling the tube bundle back into the condenser shell, the weld holding the lug onto the shell broke. The lug struck the employee in the throat.",1
"While cutting aluminum material with a band saw, the blade of the saw jammed and slipped causing the employee's right thumb to be cut by the blade resulting in a fingertip amputation.",0
On 9/14/15 an employee was operating a ham skinner machine when his right hand came in contact with the blade. The employee suffered a complex laceration of three fingers.,1
A carpenter employee received multiple fractures to his leg when he was struck by and pinned by a section of concrete form.  The employee was climbing down from the top of a stack of concrete forms when he stepped on an L bracket on one of the forms causing the form to move and strike the employee.,1
An employee was exiting a freight elevator when an upright vacuum cleaner operated by another employee struck him in the right shin. The resulting contusion became infected.,1
Employees were erecting a sidewalk shed  and lost control of an upright as it was lifted.  The upright fell onto the hand of an employee who was standing nearby.  One finger was amputated and another was crushed.,1
An employee was working with a pin press machine and placed his hand inside the machine to remove the pin. The pin press cycled and his right index finger was amputated at the first joint.,0
An employee was being lifted on a pallet by a forklift to fix a boom. The forklift got too close to the boom and the employee was crushed between the forklift and boom resulting in contusions to the abdomen and legs.,1
An employee working on the roof fell and was hospitalized for vertebrae fractures.,1
"An employee was injured driving when he swerved to miss a deer and impacted a telephone pole. The employee's injuries consisted of a torn pancreas, fractured ribs, chest pains and a head laceration.",1
An employee slipped on a puddle of water and fell when moving trash containers to mop the floor of the utility room.  The employee's right knee cap was fractured.,1
The employee was performing framing operations when a piece of steel angle struck the employee's head/neck.,1
"An employee was walking, tripped on an electrical cord and fell injuring the left hip and leg.",1
"On September 14, 2015, at approximately 10:30am, a worker suffered an amputation of the left pinky finger just above the palm while unloading pipe from a pipe trailer.  The employee was standing towards the tractor side of the trailer and a side boom with sling was unloading the pipe.  The load was lowered near the tractor in an effort to raise the pipe above the back stanchion on the trailer.  As the pipe slowly moved, the load struck a stanchion or DOT fender and the employee's hand was crushed in the load of pipe. No tag line was used.",0
"An employee was walking through the hallway of the hotel, tripped and fell suffering a collapsed lung.",1
An operator leaned into the loom to adjust a pin.  The beater bar came back on the operator and broke his ribs. The machine was not locked out at the time of the incident.,1
"An employee was walking between a barrier (parapet) wall and a rubber track excavator when the excavator struck his right lower leg and ankle, nearly severing his right foot. His right foot was surgically amputated, and his left foot was fractured.",1
An employee was going down the stairs when he fell on his right knee. The employee was admitted to the hospital for surgery on his right quadriceps.,1
An employee got his fingers pinched between cable and a drum on an excavator resulting in the amputation of the right pinky and index fingers to the first knuckle.,0
An employee was driving south on a stand-up crown reach truck towards a four-way intersection in the warehouse when he collided with another employee operating a stand-up crown reach truck that was stopped at the intersection heading west. The employee's left leg and ankle were crushed. The injury required surgery.,1
"Employees were working at a remote well site in Kingfisher, Oklahoma making a connection with two pipes when the pumping host attachment at one end came loose and struck the employee's left arm, breaking both bones of the forearm.",1
An employee was installing a fence. He had the leveler on top of the fence. He moved a board and the leveler fell hitting the nail gun and at the same time the employee had a finger on the trigger. The gun fired a nail into his thigh.,1
An employee was standing on a nine foot step ladder stocking merchandise. She lost her balance and fell backwards hitting her head on the concrete floor.,1
An employee suffered cramps and was taken to hospital for heat stress symptoms.,1
An employee was crushed-by a concrete structure when it was being placed along the southeast section of the lake's shores/bank. The employee's pelvis was broken.,1
"Employees were descending a water tower in suspended scaffolding. About 30 to 40 feet above the ground, one of the motors locked up and the scaffold stopped. One of the employees detached his rope lanyard from his harness and attempted to slide down another rope lanyard. The employee fell off the rope hitting the ground and fracturing both legs and suffering severe rope burns on this hands.",1
"An employee was descending a ladder, lost balance and fell injuring his left leg and knee.",1
"On or about 9/15/15 at approximately 2:30 pm, an employee was removing a rear tire of a dual wide trailer when one of the tires blew and the employee's left hand was knocked into the wheel well causing a fracture. The employees was hospitalized for surgery.",1
"An employee was checking lumber sizes in a ""safe zone"" about 18-20 ft from the board edger when a board broke while being processed. The wooden pieces were ejected, striking and injuring the employee 20 ft away. The employee sustained a broken nose, injuries to the face and loss of consciousness.",1
An employee was working on a metal detector that was not locked out or tagged out. The machine started unexpectedly and caught his left hand middle finger resulting in amputation.,0
"At approximately 11:30 on 15 September 2015, an employee was hospitalized when he was struck in the chest by a cap on a pressure vessel that he and another employee were removing. Remaining pressure in the pipe leading to the pressure vessel caused the cap to violently dislodge during the procedure and strike the employee in the chest, breaking one rib and causing the employee to suffer a broken left elbow, a laceration that required sutures on his right elbow and a hemorrhage on the artery leading to his adrenal gland.",1
"An employee was operating a tractor mowing a field, fell off and was run over by the tractor fracturing the pelvis, right arm and causing internal bleeding.",1
"On September 14, 2015, an employee was pulling a large roll of carpet when the roller grabbed the employee's hand and amputated his left ring finger to the end of his nail.",0
"An employee fell 20 feet from a bucket truck and fractured his ribs, collarbone and neck.",1
An employee fell 20 feet from a ladder and fractured his upper right arm in two places.,1
An employee fell from a ladder while restocking shelves injuring the elbow.,1
"An employee was hit from behind by a lifting attachment as he was in the process of rigging a rebar cage. The lifting attachment was not secured properly to the forklift. As it was being raised, the forks were tilted forward and the lifting attachment slid forward falling onto the backside of the employee who suffered ligament damage in the right knee and was hospitalized.",1
A temporary employee received a right foreman fracture as a result of entanglement injuries from contact with a moving conveyor line and tail pulley.,1
An employee operating a jointer amputated the right hand middle and ring fingers.,0
An employee was repairing the weather stripping around a door and amputated the top of the left middle finger.,0
An employee was using a chainsaw to cut brush along a utility right of way when the chainsaw kicked back and injured the palm of his left hand.,1
A refrigeration technician slipped and fell from the third rung of an interior roof access ladder resulting in a broken leg and possible head and hand injuries.  ,1
An employee was loading advertisements into the tie machine and got his left hand caught in the machine resulting in amputation of the pinky and right fingertips.,0
An employee fell when her heel was caught on the carpet.  The fall resulted in an ankle fracture that required surgery and hospitalization.,1
An employee was helping a pallet jack operator to free the forks on the pallet jack from a pallet when the employee's leg was caught between a wall and the pallet jack causing a lower leg fracture.,1
The heat treat/batch furnace operator had latched the batch furnace carriage with a bar and was moving the carriage to the furnace. The carriage jumped on the track and the latch came loose pushing the bar towards the operator pinning the left hand pinky finger between the bar and the nearby handrail.,0
"The employee was working with another coworker in the process of charging a furnace (place scrap metal into the furnace). The injured worker's coworker was on a PIV that had a hopper on the lifts. In the hopper were briquetted radiators (compressed radiators in bales). As the hopper was being moved on the PIV, the hopper latching mechanism malfunctioned causing the hopper to tip and the  briquetted radiators to fall out and roll into the injured employee's leg.",1
An employee was attempting to pull a vehicle onto a flatbed tow truck when it broke free from the tow chain and rolled over the employee's right leg.,1
The boom of the Jerraff Side Trimmer fell on top of an employee fracturing his ribs and lower back.,1
AN employee was loading potatoes into the trailer hopper and fell approximately 4 to 10 feet from a platform fracturing the pelvis.,1
An employee was walking in the attic to install HVAC equipment and fell between the studs to the concrete floor below resulting in a skull fracture.,1
An employee was observing other employees install a forming machine and began to complain of leg cramps.,1
"Employee was moving a pallet of materials off a shelf with a forklift. He hit the support for the shelf above while moving the pallet. The pallet of compact disks on that shelf fell, striking the employee. The employee suffered fractured vertebrae and ankle injuries.",1
An employee was using a gas powered saw to cut a 30 inch pipe. The saw guard kicked back and struck him in the face causing a laceration.,1
An employee was cleaning an asphalt paving machine when the roller struck him in the leg.,1
An employee fractured a knee after slipping and sliding down the lint slide on a cotton gin.,1
"On or about 9/16/15 at 11:20 am, a temporary employee at Osceola Farms was performing water blasting operations inside a tank when was shocked.  The employee was hospitalized after complaining of chest pain.",1
"An employee was standing on the bed of a flatbed truck untying the rigging used to secure a utility pole.  When he finished, the employee jumped off the bed of the truck and fractured his tibia.",1
An employee pinched his left index finger while operating the strap machine.,1
An employee was hospitalized due to dehydration.,1
An employee was walking across the job site gathering tools when a six inch metal flange fell from above onto the employee and striking his hard hat. The employee sustained a broken collarbone and broken vertebrae.,1
An employee went into the palletizer machine to troubleshoot a jam and tripped on the rake. He fell and was pinned on the rail. He broke 2 ribs and lacerated a lung.,1
"An employee's right foot received a compound fracture after it was squeezed by the tire of a garbage collection truck while he was collecting trash.  The employee underwent surgery and was hospitalized.
",1
The employee was installing a shaker box on a plow when he inadvertently bumped the shaker box causing it to move on the jacks and pinch his right ring finger between the shaker box and the mounting arm of the plow. The employee sustained a fingertip amputation with loss of a finger nail.,0
"The employee was running a card machine.  When the employee tried to remove build up, string wrapped around his left hand middle finger resulting in a fingertip amputation.",0
An employee was setting a die in the brake press. The employee was attempting to line up the upper holes when he depressed the foot pedal and the brake press lowered onto the employee's left hand thumb causing a fingertip amputation.,0
"While hanging a sign at a customer's work site, the employee lost his balance and fell approximately 8 feet from a ladder fracturing an ankle.",1
An employee was cutting wood on a table saw and lacerated his left thumb.,1
An employee was standing in a lift bucket changing out a still energized transformer on a power pole. He received electrical burns to the left forearm and right arm. Rubber gloves were not worn at the time of the incident.,1
"An employee was on a stepladder installing a sprinkler pipe in a stairwell. He was on the fourth rung of an 8 foot step ladder tightening a fitting when the wrench slipped causing him to fall over the railing to the lower level, then roll down the stairs, ending up two levels below his starting point. He was hospitalized with a concussion, five broken ribs and a punctured lung.",1
An employee was riding a golf cart at the dealership and fell out striking his head on the ground. The employee suffered a brain hemorrhage requiring surgery.,1
An employee was lifting a grader with an air tugger and got her left hand index finger caught in the metal wiring resulting in amputation.,0
An employee fell down stairs in an office building resulting in a shoulder injury.,1
"An employee was operating a Barrett double jack and making a ""U"" turn when he lost balance and inadvertently pressed on the brake causing him to fall off the equipment. The front plate under the carriage struck his foot as he fell. The employee sustained lacerations to his toes and two hairline fractures.",1
An employee was cleaning the AMC (automated cutting machine) and reached into the machine resulting in the avulsion of the right distal interphalangeal. The machine was not locked and tagged out at the time of the injury.,0
An employee was working from a ladder to seal a grain bin door.  The employee fell from the ladder and fractured his right foot.,1
"On September 16, 2015, an employee was troubleshooting a nail gun when the gun went off and the employee was struck by a nail in the left hand. The employee was hospitalized for hand surgery.",1
An employee reached across a conveyor to straighten a 14 lb. bag of dog food that was coming down the conveyor when he slipped and his hand went through the rollers on the transition conveyor. The rollers continued turning and rubbing against the employee's arm causing severe skin burns to his left forearm.  Employee was hospitalized overnight for skin graft purposes.,1
An employee was crushed between a rolling transfer car and a parked forklift resulting in a fractured pelvic bone.,1
The employee was operating a shear to fabricate a part for a crane.  The employee placed an aluminum sheet into the machine opening and accidently hit the foot control which activated the press.  The employee's left middle finger was amputated above the first knuckle.  The employee was treated at a local hospital and released the same day.,0
"An employee walking though a grassy area between parking lots, stepped in a rut, and fractured an ankle.",1
"On 9/16/2015 at 8:45 am, an employee was walking between a dump truck and a pick-up truck and broke his left femur. The employee was hospitalized overnight.",1
An employee was removing a metal product from a storage rack and lost his grip on the product causing the product to fall and lacerate his right arm.,1
An employee was trying to retrieve a twist lock with a pole. The twist lock fell. As he tried to get away he tripped and fell. He was taken to the hospital with pain in the chest and abdomen.,1
A worker had shut down a machine and removed the guard to make an adjustment.  The worker restarted the machine and reached into the machine to remove a paper chip. His right hand index finger got caught in a roller and amputated down to the second knuckle.,0
An employee was delivering mail and fell hitting their head on the concrete sidewalk.,1
An employee using a table saw amputated the tip of the right index finger from the first and second knuckle.,0
An employee operating a forklift caught their right ring finger between lift truck cage support and a stack of pallets causing an amputation.,0
An employee received rib and shoulder injuries after falling off of a picking cart.  The cart tipped over while the employee was standing on it while picking orders and/or putting merchandise in a bin.,1
An employee strained her arm while moving a patient.,1
"An employee was standing on the DOT bumper observing a concrete chute. He slipped and in his attempt to restrain his fall, inserted two fingers into the roller on the concrete ready mix truck. Two fingers were crushed requiring amputation.",0
An employee was operating a front end loader on a pile of raw material (wood chips and saw dust). The front end loader rolled down the pile. The employee sustained broken ribs and a punctured lung.,1
An employee was injured and hospitalized while assisting a resident from a wheelchair to the bed. The employee fell and fractured the left shoulder.,1
An employee working in an aerial lift maneuvered the bucket and the tip of his pinky finger was severed in the bi-fold door.,0
An employee was struck by motor vehicle while doing road clean-up work on the shoulder of the road.,1
"An employee was setting up scrapers to clean the floor. The scrapers were in a cart and when one of them was falling off the cart, the employee tried to catch it and lacerated his right thumb.",1
"Two employees were replacing a high voltage single power line between two poles. One employee, was electrocuted at approximately at 08:15 AM and received third degree electrical burns on the right arm and back side.",1
The inured employee was holding and lowering a shaft from machine number GK24 onto a jack stand. The shaft slipped and fell on the worker's finger causing an amputation of the right middle fingertip.,0
"While at the Pultrusion Machine, an employee was stepping down from a resin cart, twisted his back, and could not get back up.",1
"An employee was grinding meat. As the meat was grinding in the mixer, the employee opened the lid and stuck his hand into the mixer before the blades came to a complete stop. His right hand/arm got stuck between the mixer and the housing resulting in a right arm fracture and removal of skin.",1
An employee was using a chop saw to cut pipe when the saw kicked back and severely lacerated the employee's neck.,1
"An employee opened the gate to inspect a part of the Tangent deep draw hydraulic press. Lock out/tag out wasn't used. A co-worker provided additional light and crossed the light curtain in front of the press activating it. The injured employee suffered cuts to both arms, burns to the left hand and a compression injury to both arms.",1
An employee was picking up surgical instruments and twisted her chest and side.,1
An employee was splitting wood with a hydraulic splitter and got his right pinky finger caught between two pieces of wood amputating the fingertip.,0
An employee closed the door on her left pinky finger resulting in a partial amputation of the fingertip.,0
An employee was assisting with moving equipment. The employee jumped from the moving equipment onto the ground to place chock-blocks and broke his leg. He was hospitalized.,1
"An employee was working on the #2 water softener. The sight glass blew, spraying the employee with hot water and causing an eye injury.",1
An employee was standing on a movable machine bed. The employee reached up to grab a rail and caught her hand in a shear point between a bearing block and the machine frame. Her right hand pinky and ring fingers were amputated to approximately the second joint.,0
An employee was hospitalized after scrapping his arm on a metal stud wall at a job site.  The cut/scrape became infected.,1
An employee was bitten by a rattle snake on the right index finger.,1
"The forklift operator got his hand caught between the top roll bar of the forklift and a piece of framing that was protecting a hydraulic fluid line resulting in a laceration to the top of the left hand, a broken ring finger, a crushed little finger and hospitalization.",1
An employee feel off an eight foot step ladder and landed on the concrete floor. The employee was hospitalized with a head injury.,1
An employee working in the maintenance shop dressing a 6-8 foot roller at ~ 64 RPMs. He was injured after being pulled into the roll resulting in the avulsion of the underarm of the right forearm.,1
An employee was struck by a car in a work zone and suffered multiple severe injuries.,1
An employee was threading a new roll of bags into the midstream bagger machine. The jaws of the machine include a heat seal and cutters. The machine activated and the jaws caught his finger resulting in the amputation of the left index fingertip.,1
An employee tripped and fell over a walker.  She was transported to the hospital where she was admitted overnight and had surgery for a left wrist fracture the following morning.,1
An employee was making a delivery when another delivery truck's hose exploded spilling cement dust. The employee suffered respiratory illness due to the inhaled cement dust.,0
An employee was working a 100 ft. below the North gridiron floor when a piece of steel fell through the gridiron floor and struck the employee's ring finger on the right hand lacerating it.,1
An employee was shocked while changing wire on a welder.,1
An employee was walking behind other workers carrying a leaking bag of trash. The employee slipped and fell forward landing on the edge of a platform lift and fracturing four ribs.,1
The employee was operating a saw and reached in to remove a jammed aluminum part and amputated the tip of his right ring finger.,1
"The employee was cutting a piece of ductile 8"" iron pipe with a hot saw or quickie saw. The weight caused the pipe to pinch the blade and the pipe kicked up and struck the employee in the face.",1
An employee sustained a broken leg and knee after falling approximately 10 feet from a plank.,1
"On September 17, 2015, at approximately 6:30pm, a worker was injured when the tip of his right index finger was pinched while changing the blade on a horizontal band saw.  Lockout was used to de-energize the machine.  As the employee manually turned the wheel to engage the blade, his finger was pinched between the wheel and the blade, resulting in amputation.",0
An employee caught a hand in a pulley system while trying to untangle the cable resulting in a finger amputation.,1
"An employee was injured on September 17, 2015, while retrieving a mold for setup of a plastic injection molding machine. The employee was retrieving a mold from a rack system approximately 8 feet tall.  He climbed to the second shelf of the rack system (approximately 4-5 feet) off the floor.  When attempting to descend the rack system he slipped and fell to the floor below.  He landed on his buttocks and back.",1
An employee amputated the tips of the long finger and ring finger while operating a shaper saw.,0
An employee was preparing to change the line over to a different product on the breader elevator and amputated the right index fingertip.,0
An employee fell off a step stool and injured her hip and pelvic bone.  The employee was hospitalized.,1
An employee was performing preventive maintenance on the conveyor motor and amputated the tips of the right thumb and index fingers.,1
An employee fractured his left foot when it was caught between a concrete curb and the forklift he was operating.,1
An employee was walking down the ramp of a delivery trunk using a hand dolly to carry five cases. He slipped and the metal part of the dolly landed on his two right middle fingers lacerating them both down to the bone.,1
An employee was injured while guiding a street lamp post into position. The cast iron base of the post slipped and crushed his finger.,1
"The employee was circulating mud and water and sucking fluid from a steel container with a running vacuum truck. H2S vapor accumulated under the truck. When it reached his hot pump, it caused a flash fire.  The employee suffered burns to his face and hands.",0
An employee was removing shank bone from a ham with a five inch de-boning knife. The knife slipped and struck his left forearm resulting in a 2 to 3cm laceration just below the elbow.,1
An employee was assisting a resident back from the bathroom. The resident was pushing a walker and began to fall. The employee went to keep the resident from falling and felt pain in her stomach. The result was a hernia that required surgery.,1
"On 9/18/2015 two employees were performing preventative maintenance on the friction washer.  They were attempting to remove a 2-part screen that needed to be replaced due to wear.  The screen has two parts.  An employee removed the first part of the screen and placed it away from the machine.  While this was going on, the second piece of the screen slipped and fell on the back of his right wrist.  When the employee jerked his arm back, he cut a tendon on the back of his right wrist.  He was taken to the hospital where the tendon was re-attached.",1
"An employee was outside on a break and was walking back to her work station when her ankle gave out, causing her to fall to the concrete floor. She broke her elbow in the fall.",1
An employee received a partial amputation to the right middle finger while clearing a jam on the Skive Machine (leather trimmer).,0
"Two tower climbers were running a heavy duty coax cable up to an antenna tower.  One employee was on the ground running the cable up to another employee who was approximately 100 feet from the ground.  The cable was on a reel and the front end of the cable was cut and live.  One of the employees touched it and was shocked. The injured employee received second degree burns on his right arm, third degree burns on his right thumb and minor burns to his knees.",1
An employee was cleaning a trailer with a steam cleaner. The vent was not working correctly and the steam turned to water splashing onto the employee. The employee received first and second degree burns on the arms and chest.,1
An employee was installing metal framing in a scissor lift approximately 25 feet above the ground. A piece of metal that was being installed started to fall out of the lift and the employee went to grab it and severely cut his forearm.,1
"An employee stepped onto an electric pallet jack and lost footing.  He reached for a handhold and accidently grabbed the throttle. The jack lurched forward, crushing his foot between the jack and a pallet.",1
An employee was cooking food and suffered burns to the face due to a grease fire.,1
"An employee was working on an enclosed balcony putting up flashing between the balcony and the porch. The employee went on the outside of the balcony. He was holding on to the railing when it became loose and he fell approximately nine feet to the ground below injuring the hip, shoulder, ribs and lung.",1
An employee felt dull pain as he was going down the stairs at a customer's home. A week later he was hospitalized with a possible herniated disc.,1
"An employee was loading gas cylinders from a loading dock onto a pallet on a forklift truck positioned next to the loading dock. The employee stepped back and fell approximately four feet breaking two ribs, the pelvis and a wrist.",1
An employee was cutting a branch and the branch struck the employee fracturing the C3 and C7 vertebrae.,1
"An employee was on top of the clean room ceiling changing air filters. He lost his balance and fell to the floor, fracturing his left arm.",1
"An employee was leaving the prep area, tripped over a mat, and fell on her side fracturing the hip joint of the left leg.",1
An employee was servicing a box sealer that was not de-energized and suffered a broken arm.,0
An employee suffered the amputation of their right index and middle fingers at the first joint when the employee opened the door of a machine to clean the interior with a cloth and the cloth and the employee's hand were pulled into the machine.,1
An employee was struck by a car within the garage. The vehicle operator moved the car off of the hoist platform and hit the employee injuring his abdominal area.,1
"An employee was laying decking, tripped over the decking, and fell 14 feet to the ground injuring his head and back. Fall protection was not worn correctly at the time of the incident.",1
An employee amputated his right second and third fingertips with a rope.,0
An employee was taking measurements for a project estimate and fell off a second story roof breaking ribs and vertebrae and puncturing a lung. The employee was not wearing fall protection.,1
"On or about September 18, 2015, an employee fell while working on an eight foot step ladder. The employee was hospitalized with a broken arm and a head injury.",1
"An employee was walking a jobsite, twisted an ankle and fell. The employee received 16 stiches on his chin.",1
An employee sustained severe lacerations to the pinky and ring fingers of his left hand while cutting bone in pork on a band saw.,1
"An employee was hospitalized with a head injury, broken ribs, a cracked sternum and a chipped tooth after falling 20 feet from a forklift basket.",1
An employee was cleaning the fryer machine located in a Tyson Food poultry plant and partially amputated his left ring finger. The machine was not locked or tagged out when the employee removed the guard and was cleaning the machine.,0
An employee was hospitalized with a concussion after falling while dodging a guest that had run out in front of the employee.,1
"On September 19, 2015, at approximately 11:00am, a millwright was injured while spot welding a hard hydraulic line on a forklift.  The line was under pressure and hydraulic fluid was not removed from the line. The line ruptured and the millwright received 2nd degree burns to the top of his head and was hospitalized.",1
"On September 19, 2015, at approximately 3:45pm, an equipment operator was hospitalized after suffering fractured vertebrae in his neck and back, a broken left arm, and broken ribs.  The employee was operating a Morooca tracked dump truck on an access road hauling water when the track slipped off the road and the vehicle rolled over an embankment.",1
An employee was using a chop saw to cut boards to size and amputated the tips of three fingers on the right hand.,0
An employee was operating the blow molding machine and bypassed the guard to clear a jam and amputated a finger.,0
An employee amputated the left index finger on a bag machine producing plastic film.,0
"On Saturday, 9/19/15, at approximately 1:00 PM, a journeyman ironworker fell from the second deck of a structure to the first floor deck sustaining a broken wrist, several cracked ribs, and a head laceration. At the location where the incident occurred, two vertical stud members set on 16"" centers had been removed to allow room for an access ladder. As the ironworker placed his weight upon the top plate (in the area where the studs had been removed) to secure the decking, the top plate bent causing the ironworker to fall onto the first floor deck.",1
"On September 19, 2015 at approximately 2:30 p.m., two employees were working together to empty a trash container into a dumpster. One of the employee's fingers was smashed between the trash container and the dumpster resulting in a fingertip amputation.",0
An employee was injured and hospitalized with a bruised or fractured tail bone after falling off a step ladder.,1
"On September 19, 2015, an employee was riding a clothing cart down a hill. The cart tipped over and ejected the employee. The employee was hospitalized with a head injury.",1
An employee suffered a partial finger amputation on a band saw.,0
An employee was checking an electric fan motor and amputated the left ring finger in the belt and pulley.,1
An employee was hospitalized for heat exhaustion after working 8-9 hours in the heat treatment area.,1
An employee was operating a bag machine and amputated four fingers.,0
A temporary employee sustained an amputation injury to the tip of the left middle finger while unjamming Machine #22 Mail Inserter.,0
"On Sunday, September 20, 2015 at approximately 11:15 AM, an employee was walking down the cooking galley carrying a 10 pound bag of bacon.  He slipped and fell, landing on his buttocks. During his fall he reached out and grabbed a hot fryer full of hot grease to try and break/prevent his fall.  The hot grease caused second degree burns to his left hand and arm.",1
A cashier was walking through the kitchen area with papers from the front.  The cooks were cleaning the fryer.  They drained the oil from the fryer into a stock pot and set it on the floor in the aisle.  The cashier tripped over the pot and the oil splashed onto her feet.  She was taken to the hospital.,1
An employee was working in the MXBU Trucks department. The employee suffered a partial finger amputation when it was caught between a cylinder and the jig.,0
An employee was providing home care and was bitten on the right inner thigh by the client's dog.,1
An employee was installing six inch sprinkler pipes while on a scissor lift. A hanger came lose and the pipe swung down pinning the employee's left arm between the pipe and scissor lift and fracturing it.,1
"On September 20, 2015 an employee was working in spice room #1 adjusting the flow of seasoning and amputated his left middle finger when it came in contact with a rotating auger at the end of the feeder tube.",1
An employee was cleaning a polisher when the machine pulled in her cleaning cloth and caught and amputated her left index fingertip. The machine was running at the time.,0
"An employee was standing next to an excavator.  The excavator turned and the employee was struck by the excavator's counterweight.  The employee fell over into a sump hole and struck his body against a steel plate.  The employee suffered a broken jaw, broken ribs, punctured lung, and broken left elbow.  The employee was hospitalized.",1
"While he was searching for a missing knife on a gut slide in the casing department, an employee's finger got caught in the moving gut conveyor belt. His right middle finger was amputated.",0
An employee fell 30-40 ft from a tree while cutting limbs resulting in a head injury.,1
"The employee was in the process of erecting a barrier wall on the side of the road (highway construction).  The employee got his right index finger caught between the panel of the wall and the bolt, pinching/crushing his finger and amputating the fingertip.",0
"An employee was driving a narrow aisle lift in the receiving department to get a pallet to bring to the floor. He ran into an upright and, out of reflex, put his hand up. He broke arm bones when his arm got caught between the upright and the lift.",1
"An employee took off a magnet tray and his arm reached inside the pipe. His arm came into contact with a rotatory feeder blade that was aligned with the magnet tray, amputating his right index fingertip.",0
"The lift gate chain broke on an employee's delivery truck while he was unloading a cage full of garments. He struck his head on one of the brackets that holds the lift gate when it is in the up position, lacerating his ear.",1
"An employee was conducting a quality audit of livestock gates when the gates came down on him. He was pinned and sustained a pelvis injury, requiring hospitalization.",1
"On or about September 21, 2015, an employee was hospitalized after suffering a second degree chemical burn from a concentrated degreaser that had spilled onto the employee's left foot and ankle.",1
A temporary employee was operating a stand-up forklift with a foot hanging off the edge. He backed into a rack and broke bones.,1
An employee was feeling sick and dizzy and was hospitalized after contracting a bacterial infection.,1
An employee was lifting a 5-gallon water bottle to change out an empty bottle when he sustained a lower back injury and lost feeling in his legs.,1
"An employee was moving a mold cart into a thermoformer for a different product. The employee was pushing the cart from the side when the cart rolled and caught the employee's fingertip between the thermoformer framing and the cart, amputating the right index fingertip (full nail removed).",1
An employee utilizing the pace roll groover received a crushing injury to the right index finger that resulted in a partial amputation.,0
"An employee was measuring metal and lost his grip on the measuring tool. When he reached for it, his gloves were caught in the guide rollers resulting in the amputation of two fingers at the first joint.",0
"An employee fell from a catwalk, suffering a bone fracture and head injury.",1
An employee was exposed to a tripping hazard.,1
An employee was spraying a colony of bees using an aerosol spray when he was stung by two bees on the face and arm. He suffered a heart attack after being stung. Proper PPE was not worn at the time of the incident.,1
"On September 21, 2015, an employee fell from a screed machine while attempting to refuel it. He had ascended the machine with the fuel hose when he felt dizzy, passed out, and fell to the ground below. He fractured his skull and cracked his lip, requiring hospitalization.",1
"An employee was testing A/C equipment, reading the voltage of the compositor by placing the alligator clamps on the A/C. The employee was shocked by the A/C unit, which was not locked out at the time, and he passed out on top of the bus bar. He received a third degree burn on his left cheek and left hands.",1
"An employee was transporting a full box of product from the packaging line when she tripped over a piece of equipment, landing on both knees and fracturing her femur. She was hospitalized for surgery.",1
"After giving a presentation, an employee tripped over the steps and fell from the 18-inch stage. The employee fractured the left humerus and sustained a head injury.",1
An employee's wrist was cut by a metal stamped automobile part during a physical altercation with another employee.,1
An employee fell from a one-story scaffold/balcony when the railing broke as the employee leaned against it. The employee broke both wrists and injured their back. The employee was hospitalized.,1
An employee fell from a ladder onto the pavement below and injured the left elbow requiring hospitalization.,1
"An employee bled a water heater gas line after replacing it and then attempted to start the gas water heater. This provided an ignition source, resulting in a flash fire with flame front. The employee received first and second degree burns on exposed facial and hand skin.",1
An employee amputated the right middle finger while operating the brake press.,0
An employee was conducting maintenance on a cylinder when the weld broke on an attachment plate used to lift a steel beam. The beam came down on and broke the employee's left forearm.,1
"An employee was stocking a five foot box containing spiral duct. While placing the box on the shelf, the employee sustained a right elbow laceration requiring surgery.",1
"An employee was holding onto the dryer's control panel that was on the fork of a pallet jack operated by his co-worker. As the pallet jack was coming down the aisle, the control panel (weighing about 400 pounds) hit a box and the control panel fell onto the employee's leg fracturing the tibia.",1
"An employee was adjusting a steel pipe from a 6-foot ladder. The anchor came off, causing him to fall 6 feet down to the floor and to land on the right side of his face. The area near his right eye was bruised, requiring hospitalization.",1
"An employee stepped off a front-rider type forklift and the equipment continued to move, pinning his left foot between the forklift and guard rail (angle iron). He broke his left heel bone.",1
An employee was adjusting the wire in a bobbin winder with the guard open. The tip of his left index finger was amputated when the wire tightened.,0
"While pushing boards through the sanding shaper machine, an employee's hand got caught between a board and the machine. The tip of her right ring finger was amputated.",0
An employee was removing a hydraulic tool and crushed a thumb between steel plates.,1
An employee was cutting wings with a wing saw and partially amputated the right thumb.,0
An employee fell from a 3.5 ft. high scaffold and broke his right wrist and left elbow.,1
"A flooring employee was cleaning an area on the fourth floor of a new construction project. The  employee lifted a piece of plywood that was covering a floor opening and then fell through the hole to the third floor. The employee fell approximately 16 feet, fracturing his lower back and tail bone areas.",1
"On September 22, 2015, an employee made a delivery to a customer location. A forklift driver for the customer struck part of the delivery trailer causing damage. When the trailer was unloaded the semi truck operator climbed up onto the trailer to inspect for damage. As the operator was inspecting the trailer he slipped and fell five feet to the ground below.  The employee was hospitalized with broken ribs and a collapsed lung.",1
An employee was standing on a pallet holding an accumulator (equipment) in place while waiting for another employee to pick it up with a forklift. The employee standing on the pallet stepped in between the gaps of the pallet and fell down causing the equipment to fall on his right leg and fracture the femur.,1
An employee was unloading merchandise and cutting open a pallet of boxes stacked 7 boxes high. Some of the boxes fell on top of the employee and knocked him 20 feet to the concrete floor. The employee had surgery to repair a broken ankle and lower knee fracture.,1
An employee was setting up the plastic injection molding machine and lacerated the left pinky finger.,1
An employee was operating a manlift and struck their abdomen against the roof joist causing a contusion.,1
An employee was pulling out a food tray from a rack and lacerated his finger.  The employee also suffered damage to a tendon.  The employee was hospitalized.,1
An employee was using a stand up pallet jack and injured his left ankle when it was caught between a wall and the pallet jack.,1
An employee fell ten feet off a ladder and onto a trailer hitch while attempting to secure the ladder with a rope. The employee suffered two broken bones in his wrist and three broken ribs.,1
Employee was trimming a piece of pipe with a skill saw and amputated the index fingertip.,0
An employee was using a hand operated push hammer to unclog the fly ash silo. A dislodged piece of fly ash pinned the employee's finger and when the employee jerked their hand out the finger was lacerated.,1
An employee removed the guard on a conveyor to perform maintenance. His hand was caught in the chain and sprocket and the left ring fingertip was amputated.,0
An employee was rigging a piece of steel. The metal was already on the ground. The employee was removing the tag line when the metal shifted and struck the employee breaking his leg.,1
An employee fell in the workplace and suffered a laceration injury to the elbow.  The elbow became infected and the employee was hospitalized.,1
An employee received a severe foot injury when two fork lifts collided. The employee taken to the hospital for treatment.,1
"The cook was unwrapping meat when a hornet attacked him.  He turned to run and fell, breaking his hip.",1
An employee was pumping hot (310 degrees F) liquid asphalt into a tar kettle and was burned on his face.,1
A truck driver was standing on the side of the truck while it was being unloaded by a forklift driver. A 12 inch piece of PVC pipe (8 ft. 7 in.) became stuck in the window lip of the truck. It broke free and sprung off the forklift striking the truck driver and causing head and neck injuries.,1
"On September 22, 2015 at approximately 5:12pm, an employee was exiting through the front entrance of the building and slipped off the top step. The left ankle was fractured due to the fall.",1
A Journeyman electrician was making an electrical connection on top of an above ground storage tank and fell twelve feet to the ground below injuring his back.,1
An employee was working in the giblet department loading paper into the wrapping machine and suffered a partial amputation of the right hand middle fingertip.,0
An employee's finger was caught between the roll housing and the sled while in the process of changing the felt. He subsequently lost the tip of his right index finger. ,0
An employee was torching a piece of steel that was to be cut down to size. The piece of steel rolled over onto the employee's lower left leg and broke bones.,1
An employee was unloading a truck of windows and window materials when various window panels fell over onto the employee. The employee sustained a broken shoulder and an elbow laceration.,1
An employee was chasing a robber and suffered a head injury.,1
An employee amputated the tip of his left ring finger between the feed roller of Shaper #3 and a piece of wood board.,0
An employee amputated the tip of his right ring finger while operating a machine to close boxes.,0
A worker was hospitalized for a fire ant bite.,1
"An employee was moving a pasta cooker when a wheel on the pasta cooker hit a floor drain grate resulting in hot water spilling onto the employee.  The employee suffered second degree burns to the head, neck, back and face and was hospitalized.",1
An employee was walking and tripped and fell breaking the femur bone.,1
An employee was climbing over a railing and fell breaking his femur.,1
An employee was working on a conveyor and suffered a partial finger amputation and fracture when the finger was caught in a the chain and sprocket.,0
An employee was walking on a platform and jumped two feet to the ground.  He lost his balance and fell fracturing the left hip and shoulder.,1
"On September 22, 2015, a delivery driver amputated a portion of his right hand ring finger while stowing the Tommy Gate on his vehicle after usage.",0
"An employee was picking up cut brush and placing it into the chipper during power line right of way clearance. The branch brushed his abdomen and lodged a thorn into his abdomen. The event occurred on Sept. 22, 2015. Several days and two doctor visits later, the employee was admitted to the hospital on Sept. 29, 2015 with a severe infection. The thorn was found during exploratory surgery.",1
An employee walking in the laundry area passed out from heat stress and hit his head on the concrete floor.,1
"An employee was performing maintenance when he found a broken solenoid valve on the dust collector machine. He reassembled  the valve of the unit, which performed an automatic blow-down of the dust collector unit. A static charge occurred, causing an explosion that severely burned the employee's body.",1
"The employee was loading parts onto a rotating conveyor system when the machine malfunctioned and the parts got wedged in the machine. When the employee reached into the running machine to remove the parts, his finger was pinched resulting in the amputation of the left index finger to the first knuckle.",0
An employee was moving a steel die with an overhead crane. The employee was caught between the upper and lower dies and received a crushing injury to his chest and back and punctured a lung.,1
"An employee was approximately 16 feet aboveground sitting on a steel horizontal beam. He was installing bolts to replace the studs that he connected to the holders. As another beam was being drifted in by the crane, the beam that he was sitting on became dislodged and fell to the ground along with the employee.",1
"An employee was helping to line up two walls that would be nailed together. A nail from the nail gun hit a knot in the wood. The nail ricocheted, hitting and puncturing the employee's chest.",1
"An employee was trying to reach a box of product from a shelf in the produce cooler. When he felt the full weight of the box, he lost his balance and fell.  His left ankle shattered during the fall.",1
An employee was pulling a come-along when the pad eye broke free and struck his right leg breaking it.,1
"While walking, an employee tripped and fell over the forks on a parked pallet jack, injuring the right leg/knee.",1
The injured employee was assisting another employee by holding metal wire. The second employee caught the injured employee's left thumb in the clamp gun resulting in amputation of the left thumb.,0
"An employee was flagging traffic with a stop sign. A motor vehicle failed to stop, left the roadway, and struck the employee. The employee sustained a broken tibia and fibula, as well as facial lacerations.",1
Two employees were moving a concrete pipe. They were on either side of the pipe. The first employee was moving the jeeper. The injured employee saw the first employee move the jeeper and went to roll the pipe onto the jeeper as well. He then ended up on the ground and received an electrical shock to his entire body.,1
An automatic stacker machine became jammed with wood boards. An employee hit the boards with a hammer from underneath to loosen them up and unjam the machine. The boards became unjammed and spilled out of the machine onto the employee's leg.  The employee suffered a broken left leg that required hospitalization for surgery.,1
An employee was cleaning a stencil machine when his finger got caught in the flow valve. The valve closed on his finger and amputated his left fingertip.,0
"An employee tripped and fell while walking down steps, breaking his femur.",1
An employee slipped from a 10-foot roof while installing flashing. The employee suffered lower back pain and a potential fracture due to the harness and lanyard restraint impact.,1
"Three employees were replacing a gasket on a liquid fertilizer tank.  While attempting to install the gasket, the injured employee's finger got caught in a pipe, amputating his right index fingertip.",0
"On September 23, 2015, an employee was shocked while connecting cable to a pole, requiring hospitalization.",1
"An employee was pushing a crate of sweet potatoes down a ramp to a roller table. His hand got caught and made contact with the drive chain sprocket, severing his right index finger and fracturing his ring and little finger.",0
"An employee was installing laminate on the roof when he stepped into a hole and fell approximately 20 feet. He fractured his left arm, dislocated his pelvis, and required left arm surgery.",0
"On September 23, 2015,an employee suffered a left hand finger amputation when a right angle air drill with a double sided hole saw slipped and caught his Kevlar glove.",0
An employee broke the upper right arm while raking leaves.,1
An employee slipped on a substance on the floor and fell breaking a leg.,1
The employee was welding the support hood of a railcar. The employee got his left ring finger pinched between the porta power and the break rod support resulting in a fingertip amputation.,0
An employee was loading cattle from a pen into a truck for transport. Two cows tackled the gate. The gate deformed and its spring-lock mechanism released. The gate struck and knocked down the employee. She struck her head on the concrete ground and was hospitalized for a small brain bleed.,1
"An employee was holding onto a braided chocker line (wire) that was wrapped around pipes being installed in a manhole by a backhoe. The backhoe came in contact with a live electrical line, and the employee received burns to his right hand and shoulder.",1
An employee sustained a right index fingertip laceration while clearing a misfeed part in a strapper machine.,0
"While an employee was exiting the excavator, he missed a step and fell about 35 to 40 inches, fracturing his left femur.",1
"On Tuesday, 9/22/15 at approximately 6:30 PM, an employee suffered a laceration to his right thigh when he backed into a motor's fan that was being repaired. The fan's protective shroud had been removed for the repairs. The employee was hospitalized for treatment.",1
"An employee was guiding a 1500-pound weight that was being carried by a forklift to the wheel on a tractor. The weight slipped off and fell on the employee's left lower leg, requiring hospitalization.",1
An employee performing maintenance on the board edger was struck and injured by a tool left on the equipment after the equipment was re-energized. The employee was hospitalized for a fractured wrist.,1
An employee caught the middle finger of her left hand in the door of the mail truck severing it at the fingertip.,1
"An employee was monitoring the process of balancing two cooling fans. The fan guard had been removed for this process. The employee grabbed the belt of the fan, which was not turned on at the time, and the force coming from the adjacent fan caused it to rotate. The employee's hand got caught between the belt and pulley, amputating his right pinky, ring, and middle fingers.",0
A temporary worker was sweeping the warehouse floor and was bitten by a rattle snake on the right index finger.,1
"The employee was loading film/packaging materials at the start of his shift when the material jammed in the machine.  When he manually removed the jam, the machine restarted and the blade amputated his left index fingertip.",1
Two employees were moving a shelving unit. The unit slipped and fell onto the employee's right big toe fracturing it.,1
"While tying an extension ladder to a building's permanent ladder, an employee lost his balance and fell 4 feet, breaking his tibia and injuring his ankle.",1
An employee was cutting and deboning shoulders when the knife lacerated his abdomen. He was hospitalized.,1
An employee was clearing loose concrete to install a pipe when another employee struck his hand with a sledge hammer resulting in the amputation of the right index fingertip.,0
"While closing the side door of an ambulance, an employee's fingers got shut in the door. The right index fingertip was amputated.",0
An employee's heel got caught in the carpet while she was moving dresses. She fell to the floor and broke her hip.,1
"While using a table saw, an employee's right index finger and right middle finger contacted the blade. The employee's right index finger was amputated.",0
"An employee scratched her right leg at work on September 23, 2015.  The scratch became infected and the leg was later amputated.",0
"An employee was replacing a motor on a chiller. While he was loosening a lug, his wrench made contact with the starter cabinet, which shorted to the ground and caused an arc flash. He sustained second degree burns to his face and left arm. LOTO was not used and proper PPE was not worn at the time of the incident.",1
"An employee was using a scraping pole to scrape spray foam from studs while standing on the floor. He moved to work on a lift and when he finished the work from the lift, he came down and made contact with the pole scraper blade, lacerating his right arm.",1
"An employee was sliding a 55-gallon drum onto another rack when the rack on the forklift slid, striking and lacerating the employee's forehead. The employee was hospitalized.",1
An employee was changing the drive belts on a fan unit. His left ring finger got caught between one of the drive belts and the motor pulley/sheath as the belt turned on the pulley. His left ring finger was amputated below the first joint and he required surgery.,1
An employee fell approximately 20 feet when a series of unbraced roof trusses he was working on collapsed. The employee's legs were pinned in the debris pile of the collapsed trusses.,1
"On or about September 24, 2015, at 11:40 a.m., an employee was filling the gift card rack in the electronics department when she tripped over one of the rack's protruding legs and fell onto her left side.  She broke her left hip and was hospitalized.",1
"An employee was unloading trees from a truck while riding on the forks of a forklift. The forklift driver moved the forks, and the employee's left hand got caught in the chains of the fork, requiring hospitalization.",1
"An employee tripped and fell while unloading goods with a hand cart. The hand cart came down on the employee's hand, pinching it between the cart and ground.",1
"An employee entered the room that reduces noise from the line saw to look at a vent. Her hand contacted the saw blade, cutting her right index, middle, and ring fingers. She was hospitalized and had surgery resulting in a partial amputation to the first knuckle of the right index finger.",1
An employee was cleaning out the air actuator. The employee called out to a second employee who did not hear him correctly and the second employee closed a valve amputating the employee's right middle finger above the finger nail.,0
"An employee was sorting scrap metal by hand. The employee's finger got caught between a piece of metal and the handrail that it was being tossed over into a bin. The piece landed on the fingertip and pinched it between the rail, resulting in an amputation.",0
"An employee was cutting material with a double miter saw. While attempting to clear a piece of material from under the machine's housing, her left hand contacted the saw blade, amputating her finger at the second knuckle.",0
"On September 24, 2015, at approximately 11:15 a.m., an employee's middle fingertip became caught inside the pin hole of a crane that was being used to set up temporary lighting. The employee was coming off the ladder and used the pin hole for leverage. The crane operator thought he was clear to actuate the boom, and while doing so the employee's fingertip was amputated.",0
"An employee was checking a compartment beneath the undercarriage of an aircraft. While the employee was closing the access panel door, the door closed on and amputated the employee's fingertip.",1
"An employee was pressure-washing a propane truck in a garage when a fire explosion occurred, burning the employee's hand and arms.",1
An employee was operating the leveler machine when his glove got caught by a part going into the machine. He suffered an avulsion.,1
"An employee had just finished setting up a printer press and was wiping excess ink off of the cylinder when the rag got caught in the roller. While the employee attempted to remove the rag, the machine amputated his right middle finger and injured his index and ring fingers.",0
"An employee's powered buggy spun out of control after being accelerated, and the employee fell and injured his left hip. He required hospitalization and surgery.",1
An employee was investigating a slitter malfunction when the employee's arm was caught in the scrap removal conveyor below the slitter. The left arm was amputated above the elbow.,1
"An employee slipped and fell to the floor while walking down the aisle, breaking an ankle.",1
"An employee at an oil field site was snubbing pipe while standing on a catwalk. As a second pipe was being loaded into the V-door, it caught the end of the first pipe, sending the second pipe into the air. The employee saw the pipe and jumped from the catwalk to avoid being struck. The pipe fell on and broke his left leg.",1
An employee was moving a pole containing a security camera downward to adjust the camera. The top portion of his right middle finger got caught and was amputated between the top and lower portion of the pole's hinge.,0
"An employee was trimming trees from a scissor lift at a height of approximately 10 to 12 feet. The employee fell from the scissor lift, sustaining a head injury, punctured lung, torn liver, and broken bones.",0
An employee was working on a heater when the fuel gas system detonated and caused a flash fire. The employee was burned on the right side of the face and ear.,1
"On 9/24/15, at approximately 5:15 p.m., an employee was positioning a jack to a block bailer. He put his left hand on the side of the jack and his left middle finger got caught between the cradle and jack set. His left finger was crushed and had to be surgically amputated to the first knuckle.",0
An employee's right calf was bitten by a dog while delivering mail to a residence.,1
"On or about September 24, 2015, an employee was unloading a piece of glass from the conveyor to place it on a cart. The employee's right-hand middle finger struck the edge of the glass and was lacerated. The wound became infected and required overnight hospitalization.",1
An employee's index finger was cut by a conveyor belt. The belt was unguarded at the time.,0
"An employee tripped and fell, hitting his head on the cabinet of the air conditioning unit he was working on.",1
"On 9/24/15, an employee was doing electrical service work to the motor of a vertical cardboard baler. The power to the motor was not turned off at the time. He received an electric shock when he grabbed the live 208 power cord and sustained burns to his hands, requiring hospitalization.",1
"On 9/24/15, at 8:10 a.m., an employee's left middle and ring fingertips (including a portion of the nailbed) were amputated while the employee was setting up a bagger machine.",0
"An employee tried to move a bench in the production shop. The bench fell on her right foot, causing fractures.",1
"An employee slipped and fell from a delivery truck while cleaning the window glass, hitting his head on the ground below and suffering a concussion.",1
"On 9/24/15, at 7:15 a.m., an employee was operating a brake press. The light curtain on the press break was inoperative at the time. The employee sustained an amputation of the right index finger's first knuckle.",0
An employee was unloading a Telehandler off a truck trailer. The equipment became unstable and tipped over striking the employee.  The employee suffered a skull fracture.,1
"An employee was monitoring the flow of flour bags along a conveyor on a packaging machine.  He noticed a bag that had gotten caught at the top and attempted to reach in to pull it through. His gloved hand got pinched in the machine, lacerating the right middle fingertip.",0
An employee dropped a large metal rim on his finger tearing flesh from the fingertip. The hospital amputated the finger to the first knuckle due to nerve damage.,0
"An employee was repairing a cooling fan and replacing the fan belt. The employee was using a screw driver to put the belt on when it slipped, catching the employee's finger between the pulley and fan belt. The employee's left fingertip was amputated.",0
"On or about September 25, 2015, while using a partner saw to cut a 4x4 piece of wood, an employee cut their left leg across the thigh and was hospitalized.",1
"An employee was on a 10-foot A-Frame ladder grinding a 3-inch carbon steel pipe with a 4.5-inch grinder. The employee fell off the ladder, breaking the left arm in three places (surgery required) and suffering a mild concussion.",1
An employee was adjusting machinery to resize envelopes when his thumb got caught and amputated between the collator and the collator wheel. The machine was unguarded at the time.,0
An employee was carrying a catalytic convertor cutter with his hand in the shearer. The employee accidently stepped on the activation switch closing the shearer and amputating two fingers on the left hand.,0
An employee amputated the tip of his right thumb just below the fingernail while cutting meat with a meat saw.,0
"An employee was dismantling transformers when one of the transformers fell on him and injured both legs. His left leg and foot had to be surgically amputated below the knee, and his lower left arm was fractured.",1
An employee placing material on a cut-off (plate) saw was injured when the material caught his left pinky finger and pinched it between the housing of the saw and the material. The finger was surgically amputated.,0
An employee was cutting scrap material with a table saw and severely lacerated the left hand index and middle fingers.,1
An employee was cleaning the okra cutter and amputated the tip of the left thumb.,0
An employee exposed to fall hazards sustained head injuries.,1
An employee was applying wax to a double-sided planer when his glove got caught by the blades. His right index finger and thumb were amputated.,0
"An employee was unloading a mail shipment off a delivery truck at the processing center loading dock. A general purpose mail container fell off a scissor lift and struck her, fracturing her left forearm.",1
"An employee was troubleshooting the fourth filling spout on an assembly line machine. While attempting to fix it, the employee made contact with the machine and his finger got pinched. He sustained a left-hand fingertip amputation.",0
"An employee was working at the former machine. As the employee attempted to pull out a full stack of trays from inside the machine, the stack pusher engaged upwards to push the trays. The stack pusher caught and partially amputated the employee's right-hand middle finger.",0
"On 09/25/2015, at approximately 4:28 p.m., a maintenance employee was injured while working on a drive chain and sprocket. The employee's right hand became caught in the equipment, fracturing the right index, middle, and ring fingers.",1
An employee was moving a patient on a rolling bed and injured her back.,1
"An employee was operating the deburring machine. While removing a part, the plunger cycled forward and smashed his index finger, which was caught in the part window. The employee's left index finger was amputated, requiring hospitalization.",1
An employee fractured and amputated the his left thumb tip when it was caught between the blade of an excavator and a steel chain while attempting to secure the excavator to a trailer.,1
An employee was hospitalized with a broken right arm after his hose became entangled with a conveyor belt and pulled him into the device.,1
"An employee was taping drywall while standing on a baker scaffold approximately 5 feet above ground level when he fell to the floor below. He fell on his head, suffering a fractured skull and several broken ribs. He was hospitalized.",1
"An employee was setting up the roll thread machine when the brake out snagged, catching and amputating his right-hand pinky finger.",0
An employee fell approximately 80 feet to the ground and was injured.,1
"An employee fell from a 4-foot stepladder while performing preventive maintenance, breaking their right hip and foot.",1
"An employee was moving a 15-gallon stock pot full of boiling water when he stumbled. The water splashed him on his arm, chest, and back, causing second degree burns that required overnight hospitalization.",1
An employee was using the paper cutting board when he amputated the end of his left-hand middle finger.,0
An employee was operating a stack loader forklift to move product when his left foot got pinned between a light pole and the lift truck. He experienced left foot swelling.,1
"An employee's left foot was crushed while driving a forklift, requiring overnight hospitalization.",1
"On September 25, 2015, at approximately 11:00 to 11:30 a.m., an employee was working from a ladder and reached for a nail gun. The ladder slid down the wall approximately 15 feet to the ground. The employee broke his left arm and left leg.",1
"An employee was inside the block plant maintenance shop waiting for a coworker to finish cutting pieces of angle iron with an electric-powered reciprocating saw. While the saw was operating, the employee's finger contacted the belt running between the saw's electric motor and the flywheel.  The employee's left index fingertip was caught between the belt and pulley, resulting in a partial fingertip amputation.",0
An employee slipped on liquid spilled on the floor and subsequently fell down a flight of stairs (10 to 12 risers). She suffered contusions and potential fractures to her back and torso.,1
"An employee in the molding department was attempting to remove material that clogged the auger of an injection molding machine. His hand got caught in the auger, which was not shut down at the time of the incident. He sustained left-hand and wrist lacerations, as well as torn tendons, requiring hospitalization and surgery.",1
"An employee was changing a cracked clamp used to join two panels together during bracing when the MSE wall panel fell over on and hit him. He sustained hand, arm, and torso injuries.",1
An employee was helping to roll out roofing material. The employee fell approximately 16 feet through pallets and plywood that were covering a skylight to the concrete floor below. The employee was knocked unconscious.,1
"An employee injured their stomach and suffered a hernia while lifting a patient, requiring hospitalization.",1
"An employee fell down while walking, fracturing his left tibia and fibula.",1
"While attempting to retrieve a piece of plastic from a conveyor, a machine that was dumping  a mushroom bin onto the conveyor hit the employee. The employee got caught between the guardrails and the dumper, puncturing the employee's lungs and breaking an arm and two ribs.",1
"An employee tried to correct a stacked pallet that was leaning over. The pallet fell on the employee, breaking the employee's hip.",1
"An employee was loading asbestos bags onto the scaffold and walking. The scaffold collapsed, struck him in the head, and knocked him down. He sustained a back injury.",1
"An employee was cleaning wood fiber debris from an airlock when his finger got caught between the metal tip of the vane and the airlock, amputating his left middle finger above the bone. The airlock was not turned off at the time of the incident.",0
An employee was helping to lower a pipe for a trench. The employee's finger got caught and lacerated between a pipe.,1
"An employee lifted, carried, and placed 6-inch frames, which weighed approximately 28 pounds, 3 feet to a nearby table. While separating the material, he felt a pop in his stomach and instantly experienced pain. He was hospitalized for rupturing a pre-existing hernia, requiring surgery.",1
"An employee was descending a fixed ladder attached to a vessel. She slipped around the fifth rung from the bottom, breaking her ankle and requiring surgery.",1
"An employee was fumigating a ship's hold when he placed his hand near the edge of a hatch opening. A coworker closed the hatch cover, which amputated the employee's right thumb. He was hospitalized for hand surgery.",1
"An employee slipped on grating, which resulted in leg fracture.",1
An employee was hospitalized due to leg injuries from being caught in a conveyor belt.,1
"At approximately 3:45 a.m., on 9/27/2015, an employee working on a bottling line was preparing to do some cleaning. The employee filled a hand sprayer with cleaning product and pumped the sprayer up. The sprayer exploded, causing a severe injury to his hand, as well as minor lacerations to his face and legs. The hand injury required surgery and hospitalization.",1
An employee was lifting a case of beer when he suffered a hernia.,1
"An employee was sorting papers on the floor of her cubicle.  She went to the copier and when she returned, she stepped on a pile of the papers and slipped and fell, fracturing her left ankle.",1
"An employee was riding a horse from the stalls to the pen when the horse bucked, causing the employee to fall to the ground. The employee sustained a broken lower leg and knee dislocation.",1
An employee was installing asphalt shingles when he accidently shot himself in the foot with his nail gun.,1
"On September 28, 2015, an employee pulled his truck and trailer off the road and exited to the side of the road. He picked up a large cone and placed it in the trailer while standing on the driver's side. He saw headlights coming towards him and immediately tried to avoid being struck by the third-party vehicle. The vehicle struck the parked trailer at full speed. Something, likely the trailer, struck his head and knocked him to the ground unconscious. He sustained injuries to the back of his body and elbow, as well as a head laceration and concussion.",1
"An employee was servicing a client's forklift when the forklift sped up unexpectedly and went off the side of the loading dock ramp. The employee was pinned by the forklift and, as a result, half of his foot was amputated.",1
"A worker poured isopropyl alcohol into an acid waste container, causing a reaction that produced acid gas. An employee working in an adjacent room was overcome by the vapors and suffered restricted breathing, requiring hospitalization.",1
"An employee was preparing to travel to onsite work locations. He disengaged the foot-operated emergency brake with his hand while the truck was in the drive gear. The truck rolled into a structure, at which time the employee attempted to place the truck in the park gear. He inadvertently placed the truck in reverse, causing it to reverse and strike him in the chest and knee.",1
"While telescoping plastic through the winder on an extrusion machine, an employee's left arm was caught in the equipment. The employee was hospitalized overnight with a broken ulna and radius, which required surgery.",1
An employee was helping to unload cable reels when his finger got pinched between a forklift fork and a trailer. His right ring finger was amputated at the first knuckle.,0
"On September 28, 2015, at approximately 9:10 a.m., a crane was being used to move a rebar mat into position when one of the lifting straps failed, causing the mat to fall.  An employee was beneath the mat as it fell; he became pinned, sustaining broken legs, a punctured lung, and facial lacerations.",1
An employee was flash burned on one side of his face and chest when the three-phase meter shorted out. He was hospitalized.,1
"An employee was using a saw table to trim and cut lumber boards. While attempting to grab the cut lumber under the table, the employee hit the foot pedal. The saw blade activated and amputated his fingertip.",1
"On September 28, 2015, an employee was hospitalized after receiving a 2%, second degree burn on his right forearm while cleaning nozzles with a bucket of hypochlorite and foaming alkaline.",1
An employee received an electrical shock when their drill bit contacted an energized wire while drilling a hole into a wall.,1
"An employee was manually pushing a center steel partition to align it in a railcar when his foot slipped. He reached up to the edge of the railcar to catch himself while the ram of the hydraulic radar pusher was coming down. The employee's middle and ring fingers on his right hand were caught in a pinch point, resulting in the amputation of his fingertips.",0
"An employee was working on a pitched roof, clearing off materials, when he fell approximately 20 feet to the ground below. He was wearing fall protection at the time, but the shock pack did not deploy, and all of the fall protection fell with him. He fractured his lower back.",1
An employee was training a coworker on how to operate an electric pallet jack. The employee was struck by the pallet jack and sustained injuries to the left leg.,1
"An employee was resetting a machine center to the home position when his left-hand ring finger got pinched between the spindle and the ball part of the press. This 
de-gloved the finger, which had to be surgically amputated.",0
"On September 28, 2015, at 7:00 p.m., an employee was adjusting the stroke length on a pneumatically powered cylinder. The cylinder actuated when the employee reattached the air source (100 psi) to the pneumatic cylinder, amputating the employee's right-hand pinky fingertip in the pinch point between the end of the cylinder body and the cylinder rod cap.",0
"On or about September 28, 2015, an employee felt a pop in their back while driving a forklift. The employee was hospitalized for a back injury.",1
"On September 28, 2015, at approximately 10:15 a.m., an employee fell from a ladder while climbing on the roof of a house to inspect it for damage as part of a claim. After striking the ground, the employee received a head injury involving the face, teeth, and facial bones.",1
An employee was servicing and troubleshooting an oven loader when the employee's right index finger got caught and amputated in the chain and sprocket. The chain and sprocket was not covered at the time.,0
"An employee fell while using crutches for a previous non-work related incident, fracturing the left side of his hip.",1
An employee was cleaning a print roller when the rag that he was using got caught and pulled his hand into the rollers. His fingers were crushed.,1
On 09/24/2015 the injured employee lifted a 50 pound of dog food in the Claims Department (returns area) and felt pain in the right shoulder. The employee was hospitalized on 09/28/2015 with strain in the right shoulder resulting in blood clot(s) in the right shoulder.,1
"An employee was delivering metal product to a customer's facility by semi-truck. He hooked a load of material to the customer's overhead crane. In the process of moving the material from the truck, his finger got caught between the metal load, amputating his left fingertip up to the first knuckle.",0
"An employee was performing maintenance on a compressor, tightening the belt, when the motor froze. While attempting to turn on the compressor, his hand made contact with the belt and his right index finger was amputated to the first knuckle.",1
An employee was walking in the parking lot during a rain storm and slipped and fell injuring the back and shoulder.,1
"On September 28, 2015, at approximately 2:45 p.m., an employee was climbing a 28-foot extension ladder that had been leaned against a mid-span, which is the line between two poles. The ladder began twisting and moving, and the employee fell 15 feet to the rocky ground below. He fractured his left wrist and required surgery.",1
"An employee was operating a chop saw to cut lumber. He went to stop the saw by hitting the stop switch and then went to the exhaust pipe to clean out sawdust. The saw blade was still spinning at the time, and the employee's hand came in contact with the spinning blade. He sustained a laceration to the back of his left hand.",1
"An employee was inside a vinegar vat for maintenance purposes. He was standing on a ladder, entering the space, and wearing a respirator when he was overcome and fell from the ladder into the vat. He was hospitalized for chemical burns to his lungs.",1
"An employee was in an aerial lift approximately 8 feet high in an energized zone. The employee made contact with a station transformer, causing an arc flash, and was hospitalized.",1
An employee was mounting a specialty tire using a tire machine when the machine's roller amputated his right-hand pinky fingertip.,0
"While making copies, an employee turned, caught the left foot on the copy machine, and fell fracturing the left femur.",1
"An employee was riding on the back of a trash truck vehicle when the truck struck a vehicle while reversing. The truck jerked as it shifted gears to move forward, causing the employee to fall from the back of the truck to the pavement. The employee sustained a broken shoulder.",1
An employee was helping to lower pipe into a shored trench when the employee's finger got caught between the pipe and one of the trench's shoring jacks.,0
An employee was welding angle edge onto steel beams. The employee placed a scaffold plank across two beams to provide a surface on which to sit while welding. He slipped and fell fracturing a hip.,1
"On 09/28/2015, about 4:30pm, a temporary worker fell from a trash pile/landfill and broke her ankle.",1
An employee sustained a broken foot after it was ran over by a forklift resulting in hospitalization.,1
"An employee was filling wall forms with concrete from a pump truck. He fell off of the 4-foot concrete form he was working on and his leg struck the concrete footer at the bottom of the concrete wall, fracturing his femur.",1
An installer was working at a residence laying hardwood flooring and kneeled on a tack. The wound became infected and the employee was hospitalized.,1
"An employee was leaving the elevator, tripped and fell breaking the left femur.",1
An employee fell backwards off the first or second step of a ladder while stocking grass seed on the shelf. The employee was hospitalized with a broken hip.,1
"An employee dropped the plate that he was carrying with a crane. He was pushing the plate with his right foot when he dropped it. He reacted by turning his body quickly, twisting his ankle and fracturing his left foot. The plate did not strike the employee.",1
An employee in the packing department was adjusting the box taper when his left index finger was pinched in the unguarded chain and drive sprocket resulting in a partial amputation.,1
An employee was pushing a loaded cart when the cart hit a doorway and the load began to shift. The employee then attempted to catch the load and amputated portions of the index and middle fingers on the left hand.,0
"An employee was walking around the site, observing the installation of a new sewer line, when he slipped in the mud and fell to the ground. He sustained a left ankle injury.",1
An employee was slicing potatoes and cut off the tip of his pinky finger.,0
"While an employee was holding an air conditioner blower shaft to change the belt, his left hand slipped. His left index finger got caught by the air conditioner blade, amputating his fingertip.",0
An employee was struck by a forklift truck while walking in the warehouse and sustained a leg injury.,1
An employee was admitted to the hospital due to dehydration.,1
"An employee was delivering groceries. He fell and broke his left ankle while pushing a dolly down a ramp, requiring surgery.",1
"An employee tripped when her foot got entangled in a computer cable, fracturing her right elbow.",1
"An employee was adjusting guides on a machine when another operator jogged the machine.  The employee's finger got crushed between the rollers, amputating his left ring fingertip.",0
"An employee was holding a metal diaphragm ring with a nylon stick (tool). The roller used to make the lip on a metal ring (diaphragm) came off of the die inside of the machine, causing the piece to be pulled into the rollers as the machine cycled. The employee's right-hand ring finger was amputated by the rollers.",0
An employee received electrical burns to the right thumb and middle fingers when his wrench contacted the control module of an AC unit on a boat.,1
An employee was climbing an A-frame ladder while carrying boxes and fell striking his head on the concrete floor.,1
The employee had a medical reaction to a chicken pox vaccine on 9-24-15. The vaccine was a job requirement.,1
A nurse was checking a patient's room and fell breaking her hip.,1
The employee was cleaning pieces of metal off a magnet. The magnets drew together and pinched the employee's right ring finger resulting in amputation.,0
"On or around 9/29/15, while taking measurements for installation of a lightening protection system, a worker on the second floor of Building 148 fell approximately 10 feet through a ladder access hole and fractured their skull.  At the time of the incident, a guardrail was in place on 3 sides of the access hole.",1
An employee was retrieving supplies and/or documents from a storage room and tripped over a step stool. She fractured her right femur.,1
"An employee cut their left thumb on September 29, 2015.  On October 1, 2015 the employee was hospitalized for a severe infection in the thumb.",1
An employee's hands came in contact with a chainsaw operated by another employee while swamping brush for a sawyer. The employee damaged two fingertips on left hand and was hospitalized.,1
An employee was lowering a load of glass panels onto a manual pallet jack and amputated the tip of his right index finger when his finger was pinched between the load and the handle of the pallet jack.,1
"While operating a food slicer to cut cucumbers in the grocery store, an employee amputated the tip of his right middle finger.",0
An employee was operating a manual tabletop paper cutter and amputated a fingertip. The paper cutter was unguarded at the time of the incident.,1
"On 09/29/2015, about 10:30 am, an employee rolled a heavy piece of equipment onto his right foot. On 10/09/2015, the employee was hospitalized and had surgery to amputate two toes on the right foot.",1
"While a travel crane operator was in the process of climbing up to the cab of the crane, he slipped off a rung that was approximately 28 inches from the ground and hit his head on the ground. He suffered a laceration to the skull along with swelling at the base of his spine near the neck.",1
"A temporary employee was cleaning out hoses using a gas powered pressure washer with a wand attachment inserted into the hose.  As the employee pulled the trigger to begin washing, the force of the water caused the hose to pull back from the wand which allowed the pressurized water to strike his left thumb and index finger causing laceration/injection wounds.",1
An employee suffered the amputation of four fingers on his right hand while operating a miter saw.,1
An employee's right middle fingertip was amputated when it came into contact with a band saw that was being used to cut up meat.,0
An employee of Simplot Foods was severely burned on his neck and back when an industrial fryer he was cleaning overflowed with boiling water.,1
"An employee operating a lathe attempted to remove a shim located between the jaws of a chuck and pipe. While the employee was removing the shim, the kicker actuated, causing the pipe to move. The employee's finger became stuck between the pipe and the chuck jaws, amputating the right index fingertip.",0
"While an employee was clearing the area, a copperhead snake jumped out of the brush and bit his left pinky finger.",1
"On or about September 30, 2015, an employee was removing excess aluminum trim from a press. A coworker activated the press, which crushed the employee's left forearm.",1
"An employee was loading pipe into a fusion machine when the pipe became crooked. The employee tried to remove the pipe by lifting it with a coworker. His right pinky and ring fingers got caught between the pipe, amputating his fingertips.",0
"An employee was operating an overhead crane to move a 1100-pound steel structure from saw horses onto the floor. While moving the structure, the load shifted and hit the employee on the head. He fell backward and hit his head on the concrete floor. He was hospitalized with a skull fracture.",1
"An employee was operating a lapper machine when its vacuum hose clogged. He turned the machine off, opened the doors, and attempted to unclog it. His hand got caught in the machine and was crushed, resulting in a hand amputation.",0
"An additional 480V service for a step-up transformer was being installed. When the circuit was tested, an arc flash occurred, resulting in lacerations to the employee's hand.",1
"At approximately 10:30pm on Wednesday, September 30, 2015, a janitorial employee was walking to a dumpster when he slipped and fell on asphalt next to the dumpster, hurting his leg.  The employee was transported to the hospital where he was admitted.",1
An employee was loading and unloading a truck when he began to feel ill. He was hospitalized for dehydration.,1
"An employee wearing a harness and lanyard was accessing the third-story roof. He stepped from the ladder to go to his tie-off anchor point, but slipped in the process. He fell approximately 30 feet to the second story and then to the ground and was hospitalized with a compressed disc.",1
An employee felt sick and passed out after spray painting residential doors by hand at a paint booth. The employee possibly overheated.,1
"On 9/30/15, at 9:19 PM, an employee was changing a propane tank when the tank ignited, burning his hands. Safety gloves were not worn at the time of the incident.",1
An employee was hospitalized with a leg fracture after falling on a staircase.,1
An employee was injured from a four foot fall off of an unguarded loading dock at a satellite location and was hospitalized with fractured ribs.,1
An employee who suffered a burn on the leg from hot water during a sanitation process was hospitalized due to an infection of the injury.,1
An employee was hooking his lanyard to his harness while standing on a ladder.  His foot slipped and he fell 20 feet. His left ankle was shattered.,1
"An employee was on a ladder removing electrical wire from a warehouse. He touched a live wire, was shocked and fell off the ladder. He suffered internal burns and a fractured skull.",1
"While breaking down a hydraulic crane, an employee was in the process of removing the outrigger pad while the outrigger was retracting and got his left hand caught in a pinch point fracturing the middle and ring finger in two places.",1
An employee was climbing into his dump truck and fell. The employee was hospitalized with a broken pelvis.,1
"While an employee was moving lumber in row one using a diesel-powered forklift, the top two packs of lumber in row two fell onto the forklift, causing the forklift cage to fail. The cage then struck the employee, fracturing his scapula and dislocating his collarbone. He was hospitalized.",1
"An employee was using elevators to latch pipe. While pulling the elevators back to latch another joint of pipe from the trailer, his fingertip got caught between the horn and bale. He sustained a right index fingertip avulsion.",0
"An employee fell while walking in the parking lot, breaking her left femur.",1
"An employee was cleaning machinery and fell from an elevated work area to the floor, fracturing the right hip.",1
"An employee's backup hammer slipped over the end stud nut, smashing the employee's left index finger between the stud and wrench. The employee's fingertip was amputated.",0
"An employee was trying to remove a piece of rubber from the cutter of a machine. His finger contacted the blade, amputating his fingertip.",0
"The injured employee, a semi truck driver, left the company in Woodward to deliver a load at various locations in Oklahoma.  He left Woodward around 3:00 AM to go to the site in Laverne, OK.  When he got to the site, he opened the door and got a forklift truck out to unload the truck by himself. Someone came to the site later and found him on the ground.  He may have fallen from the back of the truck.  He had 3 broken ribs, a fractured skull and bleeding in the brain.",1
"An employee operating a forklift struck the back of another forklift, breaking his left leg and injuring both feet.",1
"An employee was straightening wood near a saw when he was struck by a wood board, fracturing his left femur and requiring hospitalization.",1
An employee amputated his left middle finger at the first knuckle after it was pinched between a C clamp and an access panel while working on an elevator belt.,0
An employee was loading insulation into an insulation blower machine. The employee's left arm was injured when it got caught in the equipment's metal bars.,1
"On September 30, 2015, a temporary worker was applying tar to the roof and fell through the roof. The employee sustained head injuries.",1
"While trying to clear a jam in a screw conveyor, an employee's gloved right hand was pulled into the conveyor. The employee was hospitalized with a lacerated right hand.",1
An employee was adjusting a core chuck on a paper machine winder when the core inserter raised and caught the employee's right little finger between the core insert and the core chuck. The employee's finger broke and was lacerated.,1
"An employee was walking across the parking lot, fell, and broke their hip.",1
"At the time of the incident, an employee was operating a core stripper and got his hand caught in a running nip point.",1
An employee was fixing a leaf spring beneath a truck when the car jack slipped off the truck's axel. The leaf spring struck the employee and fractured the employee's head behind the ear and orbital region.,1
An employee was cutting a hickory board with a table saw. A piece of the board broke off and impaled the employee on the right wrist/forearm. The employee was hospitalized for surgery to remove the wood.,1
An employee was plugging in a forklift battery (36 volts) into a charger and was shocked. He was  admitted to the hospital.,1
An employee was nailing trusses to the side wall and stepped off of the all on to the adjacent patio ceiling. He then fell through the braces to the ground eight feet below resulting in crushing injuries to the lumbar region of the back.,1
"An employee was using a staple gun for siding or roofing activities. The staple gun engaged while the employee was changing positions, lodging a 3-inch staple into the bone of the employee's right leg.",1
An employee was moving a paper roll with an overhead crane. Her right pinky finger got caught and was amputated between the paper roll shaft and the bracket.,0
"On or about 9/30/2015, an employee slipped and fell after stepping into spilled/leaking water on a sloped walkway next to a fountain/garden. The employee fractured a kneecap.",1
"Two employees were loading a trailer with packages. The trailer was coupled with the yard dog. They were told to get out of the trailer so that the driver could move it. The injured employee took a package off the extendo, stepped backwards, and fell off the dock fracturing her femur.  She had her back to the dock.",1
An employee broke his left foot while operating a forklift.,1
An employee was walking in the warehouse and was hit by a pallet jack breaking their femur bone.,1
"An employee was performing maintenance on a press when the press door closed on his finger, amputating the fingertip between the nailbed and first knuckle.",1
"An employee fell four feet from his delivery truck, suffering head/back pain.",1
"An employee was replacing an underground drain line with a coworker. The employee was bent over when a light pole that was sitting on the ground with the arm section leaned against the wall fell over and hit the employee on the back, breaking two lower back bones.",1
"An employee and a coworker were installing a drive pin on a filler machine. The employee was holding the equipment while the coworker manually turned the filler. The employee's finger got pinched between the motor casing and the filler drum, amputating the left middle fingertip.",0
"On Thursday October 1, 2015, at the Suncast Distribution Center in Montgomery, Illinois, an employee was bent over working. Coworkers nearby were manually breaking down double-stacked pallets with boxed products. The last box (weighing 208 pounds) on the top of a double-stacked pallet shifted and fell onto the employee from overhead. The employee suffered a closed fracture to the pelvis, femoral vein damage, a pelvic hematoma, and a lower body injury.",1
"An employee was attempting to clear a pizza pan jam on the conveyor. The line was not shut down at the time. As the pans continued down the line, they jammed and pinned her left hand against the metal bar that guides the pans. She could not remove her hand and sustained a laceration, fracture, and burns to the palm.",1
"An employee was cutting sheet metal when the sheet metal curled up and bounced back, striking and lacerating his left eye.",1
"On or around October 1, 2015, an employee was attempting to pry up a refractory plate into a bobcat bucket when his right pinky finger became pinned between the pry bar and the furnace wall. His pinky finger was amputated.",0
An employee was unloading freight from a truck when the load fell on and broke his ankle.,1
"An employee was unloading materials in a UPS trailer while standing on a step stool. The employee fell off the third rung of the step stool to the ground below, fracturing the left leg.",1
An employee was reaching into the cab of the truck to obtain a flashlight. The truck began to move and hit a parked trailer causing the truck door to close on the employee's legs fracturing the left leg.,1
"An employee's golf cart drove 5 feet off the golf course's retaining wall into a pond. The golf cart landed on top of the employee, who suffered ankle, wrist, eye socket, and rib fractures.",1
"An employee fell approximately 25 feet from the second-story roof of a residence where he was installing solar panels. He fractured his feet, ankles, legs, and wrist and suffered a spinal injury when he hit the ground. He required surgery.",1
"An employee was performing maintenance, removing manifold gauges from a residential air conditioning unit. The employee unscrewed the gauges and the liquid refrigerant sprayed onto the employee's hands. The employee suffered chemical burns to the left palm, four left fingers, and the right index finger, requiring hospitalization.",1
An employee was hit in the head by pipe while pulling it up. The employee's skull was fractured.,1
An employee slipped and fell while delivering mail. The employee's right ankle broke and required surgery.,1
"An employee was removing a horse from the exercise walker and hooking the lead to the horse. The horse reared and kicked the employee, causing loss of consciousness and a head injury.",1
"An employee was washing down sodium hydroxide that was leaking off a pump. During the washing process, caustic material soaked into the employee's steel toe boots through the laces, causing second and third degree burns to the tops of the employee's feet.",1
"An employee was working on the timing belt under a vehicle when a coworker came and turned on the vehicle. Once the vehicle was turned on, the belt system trapped the employee's left index finger and amputated the distal knuckle.",1
An employee's right pinky finger was amputated up to the first knuckle while operating a hydraulic press.,0
"While an employee was pressure testing a pipe, the test ball shot out of the pipe and severely lacerated the employee's left thumb. The employee was hospitalized.",1
An employee was operating a boom lift during painting operations when it tipped over and fell to the ground while the employee was still inside. He was hospitalized with fractured ribs.,1
The employees use the Caterpillar tractor bucket to transfer tools and equipment from the storage conex to the work site.  The operator lowered the bucket from the caterpillar onto the left foot of the injured employee injuring the big toe.,1
"An employee was machining a bolt when his jacket got caught in the chuck of a horizontal lathe, which in turn pulled him into the rotating parts of the lathe. He injured his left hand and lacerated his head, requiring hospitalization.",1
"An employee was operating a semi-automatic vertical winder to make a gasket. When he activated the foot pedal to the machine, the machine pinched and amputated his fingertip.",1
An employee was picking up auto parts and was struck by a tugger resulting in contusions to the legs and knees.,1
"An employee was standing above a concrete pump when he fell inside the hopper.  His left leg got caught inside the pump auger, and the lower part of the leg was fractured and lacerated. The pump was running at the time of the incident.",1
"An employee was selecting cases in the warehouse using a triple jack PIV. He was coasting the triple jack PIV toward the racks to select product when the PIV pinned him against the rack, fracturing two ribs.",1
An employee was assembling an aluminum tailgate when the torque gun he was using to tighten bolts slipped and caught his finger. His left middle finger was amputated.,0
"An employee was winding the end of a roll. He was jogging the end of the material onto the roll when his right hand went between the hold-down device and the take-up reel. When he pulled his hand out, his fingertip was amputated.",0
A maintenance employee was trying to reset the limit switch on an overhead crane after the operator tripped it. The employee was working near moving gears that caught his pant leg and pulled his leg in. His leg was partially amputated.,1
An employee was using a 6 ft. A-frame ladder to fix the air conditioning drain pipe on top of the awning outside the building. He fell on the pavement and injured his head.,1
An employee was cutting wood material with a table saw and contacted the saw blade amputating the middle and ring fingers of the right hand.,1
"An employee working on a vertical polisher machine was installing a saw blade. He was hoisting a blade onto an arbor with a spacer.  While aligning the blade to the bushing and arbor, he pushed the blade and bushing with one hand and operated the hoist with the other.  The blade slipped off the hoist and fell on his left thumb, amputating the tip.",0
An employee was on the back of an end-load sanitation truck while it was backing up.  The truck backed into a utility pole and the employee's hand was caught between the truck and the utility pole. Five fingers and half of his right hand were amputated.,1
"An employee was using a load device to move a metal ring for a manhole cover when he turned and fell backwards. The metal ring fell onto his ankle, fracturing it and requiring hospitalization.",1
An employee carrying a bucket of paint up a portable ladder fell approximately 10 to 12 feet when the ladder became displaced. He was hospitalized with head/neck lacerations and possible fractures.,1
"An employee lost approximately 1/3 of the finger while performing routine daily maintenance on a piece of equipment known as a topsoil screen. Two employees were cleaning debris from the radiator. In order to gain access to the radiator, the motor was moved. While placing the motor back into its proper alignment by placing a pin into a mount, the mount moved catching the employees finger and causing injury.",0
"An SSA Gulf employee was unloading cargo when his finger became caught between the cargo, amputating a portion of his left index finger.",0
An employee was installing tape to hold the paper protector on a metal roller. The employee's right finger got caught and crushed in the drive gear located next to the roller.,0
"An employee tripped over her feet and fell to the ground, fracturing her right shoulder in two places.",1
"An employee climbed a ladder and attempted to adjust the blow pin assembly of a blow mold machine. The machine was operating at the time. While the employee tried to move a bracket and tighten screws, the machine cycled and the assembly moved up, amputating the employee's right index finger below the first knuckle.",0
An employee was in the SkyTrak personnel basket cutting tree limbs. The operator was repositioning the machine when it hit a mound of dirt and caused the SkyTrak to tip over. The employee jumped out of the basket and suffered a concussion and a broken right ankle.,1
"While using a high-pressure power washer, an employee's right foot was impaled by the power washer.",1
"While getting off of a forklift, an employee slipped and fell to the concrete floor, fracturing both wrists.",1
An employee was struck in the head by materials being lifted by an overhead hoist.,1
"An employee went to pull out the dock plate but fell while doing so. As he fell, his right pinky finger got caught under the dock plate, amputating the fingertip.",1
"While an employee was attempting to unhook an air line, a water line broke and sprayed hot water/steam on his torso and arms, burning them.",1
"An employee was performing maintenance work on a malfunctioning impregnation tank lid. When the employee attached an air hose to the lid, it opened automatically and pinned his head, causing head and neck damage.",1
"An employee was rolling a movable, wheeled pedestal grinder. The grinder fell on his foot, crushing three toes.",1
"While attempting to clear a jam on the pre-curl machine, an employee's right finger was amputated to the knuckle by the machine's teeth.",1
"An employee was putting a combo inside the trash compactor. Once the combo was inside, he turned on the trash compactor, but the equipment failed to operate normally. He attempted to adjust the combo, and as soon as the combo was adjusted, the compactor reacted quickly and crushed/amputated his right middle fingertip.",0
"An employee was unhooking power cables from a barge when the metal handle of a cable came in contact with the plug, causing an arc flash. The employee was burned on the arm and torso.",1
"An employee had just applied tape to a roller, sticky side up. The next step in this operation was to apply tape, sticky side down, on top of the tape that he just applied to the roller.  His right arm got caught between two rollers that were separated by approximately 2 to 3 inches. He suffered a severe abrasion to his right arm.",1
An employee was bitten by a spider on the left leg and hospitalized.,1
"An employee was operating a robot-roller compacter when a coworker ran over the employee's leg with a Bobcat. The employee was hospitalized with a broken right leg, pelvis, and hip.",1
An employee was clamping rope clamps when her hand got caught in the machine. She suffered a partial amputation to her left index finger.,1
An employee was performing electrical work on an automatic transfer switch when an arc flash occurred. He was burned on his left ear and face.,1
"An employee working on a scaffold took a phone call, stepped back, and fell 7 to 8 feet to the cement floor. He fractured his skull, neck, and ribs.",1
"An employee had just finished picking up a donation and at 1260 Waterville Monclova Road in Waterville, Ohio. As the employee was closing the back sliding door of the box truck they were driving, the door came down on the top of the employee's right foot/toe. The employee lost balance, fell off the back of the box truck (approximately 3 to 4 feet), and struck their head against the concrete ground. The employee suffered a laceration to the right big toe and a possible skull fracture.",1
"An employee was shoveling out a garbage truck at a landfill. The wind blew the side-hinged access door shut on the employee's right thumb, amputating it between the thumbnail and the first knuckle.",0
"A maintenance employee was unclogging a sewer line when the auger cable twisted and wrapped around his left ring finger, amputating the fingertip.",0
An employee was cleaning the chuck machine with a green pad when his right index fingertip slipped into the chuck and was amputated. The machine was not locked out at the time of the incident.,0
An employee was cutting a 2x8 board with a power saw when his left ring fingertip was amputated by the saw blade.,0
"An employee was backing a stand-up forklift off a vender-owned trailer. His left foot got caught between the forklift and the dock plate, breaking the foot.",1
"An employee was driving a truck, jockeying trailers around in the yard of a beverage manufacturer. The employee later experienced shortness of breath and chest pain, requiring hospitalization for a collapsed lung.",1
An employee's hand got caught in an auger while cleaning a machine. The employee suffered broken wrist bones. The machine was still running at the time of the incident.,1
"An employee drove a forklift to the maintenance area and parked in front of the maintenance door. As he was descending out of the cab, he slipped and fell fracturing the left femur.",1
"While walking, an employee slipped on a mat, falling on and fracturing his right hip.",1
An employee was performing maintenance on a dehydration unit when the employee received a fluid burn to the left hand.,1
"An employee was operating a jointer to make parts for two window sills just prior to glue up. The employee's glove came into contact with the jointer spindle, pulling his left hand in. Three left-hand fingers were amputated.",1
"An employee was attempting to remove debris from the scanner on the veneer grading table. The rag he was using got pulled into an idler pulley, causing his hand to also be pulled in. He suffered a right thumb laceration and fracture.",1
"On 10/03/2015, an employee was mopping the floor behind the counters with a mop and bucket when the mop handle struck the menu board sign, causing a piece to fall off and strike the employee's head. The employee later experienced a seizure and was hospitalized.",1
"An employee was on a pipe rack that was approximately 7-feet high. As he attempted to roll a single piece of 20""-pipe, he lost his footing and fell backward off the top of the stacked pipe, landing on his left side. He fractured his left wrist, busted his lip, and suffered a left hip contusion.",1
"On 10/03/2015, an employee was sorting packages when a jam occurred. While attempting to clear the jam, the employee's right hand got caught by a moving conveyor belt, which drug the hand into a transition plate. The employee's right ring fingertip was amputated.",0
"An employee had greased a chain drive on a label machine. He was cleaning excess lubricant with a paper towel when the towel got caught in the sprocket and pulled his finger in, amputating his fingertip.",1
"An employee was lifting the roll-up door of a trailer when it buckled back, pinching/catching the employee's finger in the gap of the roll-up panels. The employee's right index fingertip was amputated at the first joint.",0
"An employee tripped and fell over a rubber mat on the floor while walking, breaking their left hip.",1
"While unwrapping a shrink-wrapped produce pallet, an employee became tangled in plastic wrap. He lost his footing, fell, and broke his left hip.",1
"An employee's gloved hand made contact with and was pulled in between two rollers of a mill machine while he was loading small, hardened chips of pre-mix onto the rollers for further processing. He sustained four right-hand finger amputations and third degree burns to his right forearm.",1
"Two shop employees were in the process of tearing down a 1250 Ton Slip Type Elevator (STE) and were pulling the carriers and slips out of the STE.  While removing one of the carriers from the slip, utilizing the overhead crane, the entire slip assembly (carrier, slip, and slip hanger) began to rise out of the tool.  As the slip hanger rose the IP reached in to remove it when the slip suddenly released from the carrier pushing the slip hanger back into position.  The IP's finger was caught between the slip hanger and the timing ring of the STE amputating the tip of his left index finger midway up the fingernail.",0
"An employee was about to replace a primary conductor in a power pole. He made contact with the live power source in the power pole, resulting in third degree burns on both hands. PPE was not worn at the time.",1
"While preparing to inspect parts, an employee was walking and tripped on a part that was on the floor. He twisted/rolled his ankle and fell on his hip, breaking it.",1
An employee was welding when his welding wire failed to fire and shot through his glove and into the joint between his hand and index finger. He sustained a cut on his left hand.,1
An employee was operating a soup packaging machine when the die roller amputated his right index finger.,0
"Two employees were moving an electrical panel board, sliding it across the floor. The first employee was holding the panel from the front and the second employee was holding the panel from the back. The floor was slick, and the panel slipped out from under them. The panel struck the first employee on the top of his left foot, right behind the steel toe of his boot. The big toe and second toe on his left foot were amputated.",1
An employee was pushing a food tray cart when it fell on top of her. She was hospitalized overnight with an injured pelvis.,1
"An employee was working from a 6-foot, A-frame ladder with two associates to remove approximately 16 sheets of melamine (thin particle board) from where they were secured to a permanent fixture in the back room. The employee cut the strap, releasing the boards. The associates were unable to prevent the boards from hitting the ladder, causing it to buck and the employee to fall. The employee suffered a double fracture to the left leg bones just above the ankle, requiring surgery.",1
"An employee operating a gator vehicle drove it into a block out. The approximate 8-inch sudden drop resulted in nose, knee, and wrist injuries, requiring hospitalization.",1
"An employee slipped and fell to the ground while washing dishes and injured her back, neck, and head, requiring hospitalization.",1
"An employee was trying to remove metal from the slides of a die cast machine. The machine was powered on at the time. The employee's right hand got caught in the machine, amputating the right middle fingertip.",0
An employee was hospitalized after falling from the roof of a one-story building while inspecting for hail damage. He hit his head on the pavement below and suffered bleeding on the brain.,1
"An employee was weighing off ingredients that went into the plastic homogenization for electrical wire jacket/insulation manufacturing. While he was attempting to remove excess material, a roll mill caught and partially amputated his right index finger.",0
"An employee was working at the loading dock checking a pallet when she tripped over a load bar and fell, breaking her right hip (femur). She was hospitalized for surgery.",1
"An employee was flagging traffic to stop. When the first car stopped, a second car came around the first car, hit the employee, and kept going. Both of the employee's legs broke.",1
An employee was discovered at the docking bay with a laceration to his head.,1
"Two employees were preparing to perform glazing work on the 16th and lower levels of a new construction project. The adjustable suspended scaffold failed for unknown reasons. Employee 2 was able to jump out of the basket, grab one of the supporting ropes and climb to the roof. Employee 1 fell approximately 100 ft. to the ground with the scaffold. Employee 1 sustained severe head and body trauma along with a fractured right leg.",1
An employee was chaining a seal on a piece of equipment. He was using a pry bar to lift the shaft so he could use his right index finger to put the seal in. The bar slipped and pinched/amputated his right index finger.,0
An employee was using a hoist to transfer a heat treat basket which was approximately 3 ft. by 4 ft. long from a staging rack to a conveyor. The basket was loaded with castings that go into the heat treat operation.  The employee detached the hoist and noticed the basket wasn't sitting flat on the cart.  As she manipulated the basket her right middle finger was pinched between the basket and the conveyor resulting in a partial amputation of the fingertip with loss of fingernail and subsequent revision of the tip of the finger. Stitches were used to close the wound. No surgery was required.,0
An employee slipped and fell after losing his footing when climbing out of a crane cab. He fell into the handrail and broke his hip.,1
"An employee was working from a scissor lift, installing wood boards at the eave of the building. The employee fell 15 feet while attempting to exit the scissor lift onto the roof surface, breaking ribs and suffering a collapsed lung.",1
An employee was loading patio doors into a tractor trailer when three patio doors shifted and struck/crushed the employee. The employee was hospitalized and exhibited paralysis below the chest line.,1
An employee was nailing siding to the wall when he fell 12 feet between the pump jack scaffold and the wall. He broke his femur and was hospitalized.,1
An employee was moving a dolly of studs when he stepped between an exterior wall and the concrete floor. His leg dropped down to his knee and was bruised.,1
"While removing gutters, and employee fell 4 to 5 feet from a ladder and hit his head on the concrete.",1
"An employee was walking around to stretch his legs between shuttle runs. His left leg gave out and he fell to the ground, fracturing his left hip.",1
"An employee was doing maintenance on a dough sheeter in the bakery department. The machine's housing was off at the time of the incident. His finger got caught between the chains and the housing, amputating the fingertip below the fingernail.",1
"An employee was feeding bags into a pulley. When he hit the feed button, his finger was pulled up into the pulley, amputating his right index fingertip.",0
"During general clean-up activities, the edger machine malfunctioned and cut boards began ejecting from it. An employee was struck in the back by one of the boards and sustained five broken ribs.",1
An employee was pulling merchandise and placing it on a cart. She stepped on a pallet to stack more merchandise on the cart and twisted her right ankle as she turned around and was coming off the pallet.,1
"An employee was using a log splitter to split fire wood.  He placed a log in the holder and activated the hydraulic lever that operates the blade. His left hand was still holding the log at the time, and his left pinky fingertip was smashed.",1
"On 10/06/2015, at approximately 5:40 p.m., an employee was looking for a box in the UPS truck. While exiting the vehicle, he fell inside, landed on his side, hit his head, and could not stand. He required surgery for a broken leg.",1
"On October 6, 2015, at approximately 3:30 PM, an employee was helping a coworker roll a full linen rack into his truck. The employee was pushing the rack while the coworker was pulling, and the linen rack began to sway to the right. The employee reached over the right side of the rack and attempted to control it with his left hand. He was not able to stop the rack from swaying to the right. His left hand was on the outside right of the rack, and his right hand was placed on the middle bars of the rack. His left-hand finger got caught between the linen rack and a stationary rack that was to his right, amputating the left middle fingertip.",0
"An employee was caring for a patient when the patient became irate. The patient scratched and bit the employee, resulting in an infection.",1
An employee was working at a facility that made precast concrete on machinery that pulled wire and his finger was pulled into the machine after it was started up amputating the tip of his finger.,1
An employee was walking downstairs at the workplace when he fell and hit his head on the concrete.,1
An employee fell approximately 20 feet through the roof to the ground while performing roofing work.,1
An employee was burned on the face and arm from a flash fire that occurred while changing the oil in a vehicle.,1
An employee was cleaning equipment using the central vacuum hose. The hose was not working properly.  The employee tried to troubleshoot the issue and reached underneath the rotary feeder catching his finger on the blade and amputating the tip of his right index finger.,0
"An employee attempted to push back the column in a brick cutter. The cutter swung around and cut his right hand, sustaining a possible amputation.",1
"An employee was cutting a steel plate when a scrap piece fell and was lodged on the cutting table.  The employee attempted to remove the scrap plate with an overhead crane when the two hooks came loose and struck him in the chest and face. He sustained three fractured ribs, a collapsed right lung, and a nose laceration.",1
An employee fractured his hip when he fell down on the asphalt in the parking lot.,1
"An employee climbing a fixed industrial roof ladder lost his balance on the upper landing and fell to the level below, injuring his ankle.",1
An employee was driving an electric cart with one leg outside of the cart and struck a pole breaking his left hip.,1
An employee fell off of a ladder and injured her back while attempting to fix a banner in the store window.,1
"An employee was troubleshooting a lube pump on a press. He used his hand to determine the issue inside the lube tank, and the pump shaft come down on his finger.  His hand was trapped between the lower shaft that was broken, amputating his right middle fingertip.",1
An employee's right hand was amputated while rigging new hoisting cables on a crane.,0
An employee was picking up scraps between two CNC saw tables. One table was in operation and the two tables moved together pinching the employee's left thumb resulting in a fingertip amputation.,0
"An employee tripped when the ice cream machine he was moving became tangled in his shoe lace. The machine fell over and landed on his left hand, fracturing four fingers.",1
An employee fell from a makeshift scaffolding breaking the left ankle.,1
"An employee was working on the rooftop, using a material hoist, when he was struck by the hoist. He fell onto and injured his back.",1
"An employee was cutting 2x4's when his left hand came in contact with the blade of the chop saw, amputating two left fingers.",1
An employee was removing products from a conveyor belt when her hand got pulled into the conveyor. Her right middle fingertip was amputated above the first joint. The machine was not guarded at the time.,1
An employee caught his left arm in the puller as he was feeding parts into the machine. The employee's fingers were dislocated.,1
"An employee was loading a pallet onto a jack when the jack moved backwards, pinning the employee's right leg against a rack. The employee sustained a leg laceration.",1
An employee was using an hydraulic pipe bender and was setting the pipe in place to bend when a coworker started the machine. The employee's finger got caught between the metal conduit and the yoke of the machine. His right-hand middle finger was amputated above the first knuckle.,0
An employee received a fingertip amputation when his right hand thumb got caught between the closing rod and latch of a dumpster.,1
An employee was pressure washing the roof of a three story building and fell off the roof breaking an arm and pelvis.,1
An employee fell approximately 13 feet from a roof.,1
Five employees were leaving the jobsite on an ATV designed for four passengers.  The ATV was traveling down a steep hill on a gravel road when it fishtailed and began to roll due to the steepness of the grade. Two employees who were not wearing seatbelts were ejected. One employee suffered two broken ribs and was hospitalized. The other employees were treated and released.,1
An employee was loading a forklift onto a skid when it rolled forward pinning him between the forklift and van causing severe bruising.,1
"An employee was using a wrench to tighten a bolt on a baler. When the bolt broke loose, his right forearm struck the edge of his tool cart and fractured.",1
An employee tripped over a rubber mat in the produce section and fell fracturing the right hip and pelvis.,1
An employee fell 7-10 feet from a flatbed trailer while removing a tarp from a load of lumber and was hospitalized with a small fracture to the pelvis.,1
"An employee was struck by the lever of a waste container while unloading it. The lever sprung out and struck the employee's face, fracturing the cheek bones and jaw bone.",1
An employee was unloading frozen fish from a vessel and got his hand caught in the cable of the vessel's winch and pulley. Two fingers were amputated as a result.,0
An employee suffered a broken right arm while trying to move a metal cabinet.,1
An employee in the fabrication shop was operating a tube saw and amputated her right thumb from the base of the nail bed to the tip when the guard crushed her thumb before she could get her hand out of the way.,0
"On 10/07/2015 at approximately 3:30 PM, an employee was helping a Bobcat operator load a two piece steel barrier wall form onto the bed area of the knuckle boom truck. As the forms were being lowered into place, the tip of his right middle finger was smashed between the two forms pieces.",0
"An employee was stepping over a barricade, tripped on his lanyard and fell approximately 2-3 feet to the floor. He suffered a broken right tibia that required surgery to repair.",1
An employee was working in the production area cutting pineapples with a knife and amputated the left index fingertip.,0
An employee was hospitalized with a fractured right wrist and skull fracture after falling off a 10-foot ladder.,1
"An employee was pulling a pan out of the steamer and was burned on her head, face, chest, stomach, and upper arms by hot water.",1
An employee was mixing grout in a cement mixer. The machine was turned off. The employee reached into the mixer tub with his left hand to clean the grout off the mixer paddles and his right shoulder accidently struck the mixer's start lever. His left arm was caught in the machine and broken.,1
"An employee had his left ring and small finger amputated when he placed his hand in the Horizontal Compression Machine (HCM) to clean the sensor that was located approximately 18"" inside the machine. ",1
"Maintenance employees were using a forklift to lift a pallet jack to check the wheels. While the pallet jack was being lifted, the battery fell out and struck one of the employee's in the right leg fracturing it.",1
An employee was acting as a spotter while moving a freight of glass to keep the freight balanced.  The freight fell striking the employee on his right leg and breaking it in two places below the knee.,1
An employee tripped going up the steps and struck his head and knees on the concrete steps.,1
"On 10/07/15 at approximately 10:10 pm, a Goodman employee was returning from break when he slipped on some oil on the floor in the coil department and fell. The employee has been admitted to the hospital for evaluation.",1
An employee was operating a portable grinder with a cup tool attachment to bevel the edge of a piece of pipe. The cup tool disintegrated and debris from the cup tool struck the left side of the employee's face. The employee was transported to hospital.,1
An employee became ill while at work and required hospitalization.,1
"An employee was using air to blow out the line of a pump in the rending room when the air caused a pump plate to come loose and strike the employee's left leg, fracturing it.",1
"An employee was setting up the site to begin work on a scaffold. When the employee got on the scaffold, the scaffold began to roll. It hit a hole in the floor and fell over. The employee also fell and the scaffold landed on top of him breaking the left leg.",1
An employee was in a bucket truck installing a lightning arrestor and was shocked.,1
An employee was applying an adhesive with a high pressure system when the hose ruptured spraying adhesive onto the employee's face and causing a facial laceration. Adhesive was injected into the left eye. The employee was wearing clear safety glasses and other required personal safety equipment.,1
An employee performing cutting operations with a torch suffered second degree burns to 6-7 percent of his leg after the slag and torch flame came into contact with his leg.,1
An employee suffered second degree burns to the left hand and side when hot chicken broth he was carrying spilled on him.,1
"A bag machine operator was retrieving a bag that jammed the machine and severed the left index fingertip.  The bypass switch on the machine was activated. Once the switch is activated, the machine cycles one more time before it hits the home position and stops. The door was opened before the cycle completed and the star wheel pinched the tip of her left index finger, severing it just above the first knuckle. The incident occurred October 7, 2015 at approximately 9:35hrs.",0
"On 10/7/15 at about 1:30a.m., an employee fell from a ladder attached to a tanker truck and broke his left hip and pelvis. The employee was transferring residue from Tanker 11 to Tanker 15 in the tanker pit. The employee was using the ladder attached to Tanker 11 to climb onto the tanker when he fell to the concrete floor.",1
"On or about October 5, 2015, an employee was trying to free the door of a grain dump truck when the locking mechanism got stuck. Once the door was freed, it slammed on the employee's right middle finger. The right middle fingertip was amputated.",0
A rural letter carrier injured his knee while descending the steps at a residence. He was admitted to the hospital for surgery.,1
"On or about October 7, 2015, an employee of Alpha Controls & Services, LLC was performing a service call at a client location and stepped on an unsecured sewage injection pit access panel that gave way. His right leg fell through the 16"" x 18"" x 24"" floor opening, resulting in a groin injury requiring hospitalization and surgery.",1
An employee was repositioning a gift shop display from inside the door to outside the door when the employee fell and broke the left hip.,1
"An employee was picking frozen product from a freezer and placing it on a pallet. The employee was stuck by a coworker operating a lift truck, and his leg got pinned between the lift truck and the pallet. He suffered a lower left leg fracture, requiring surgery.",1
An employee was cutting a piece of OSB with a circular saw and amputated his index finger.,0
An employee received burns to his hands from electrical shock while stripping off a neutral wire on a 277 volt system.  The employee was hospitalized as a result of his injuries.,1
An employee received crushing injuries to his left ankle when a 600 pound coil of steel fell while positioning the coil onto a forklift.,1
"On October 7, 2015, an employee operating a floor buffer machine suffered a fingertip amputation when the pinky finger became caught between the machine handle and a door handle.",0
An employee was repairing a boiler unit and received electrical burns to the face and arms from an arc flash.,1
Employee 1 was working the night shift building trusses. Employee 2 was operating the roof press.  One end of the press table has gaps so that the truss can be pulled out.  Employee 1 went into the gap at the end of the table to pull a truss out and the employee's right thigh was caught between the gap in the table and the edge of the press when the press was activated.,1
"An employee tripped and fell getting out of a transportation van, breaking both ankles.",1
An employee injured his leg when setting a floor tile.,1
An employee experienced a partial amputation of the left ring finger while working with another employee to knock out a pin with a sledgehammer.,0
An employee was using an overhead crane to move a piece of equipment into place when the piece fell and struck the employee's lower leg. The injury required surgery to repair.,1
"A temporary worker employed as a material handler was standing in an aisle way at the distribution warehouse when a PIV came around the corner and ran into this employee, pinning him against the rack system.  The employee sustained severe compound fractures to the right foot.",1
A deli associate was doing evening clean up and moved a deli cart from its place next to the fryer to the triple sink with a hose.  The employee tripped over hose and fell breaking the left hip.,1
The employee was making a batch of metal powder in the reactor. He added acid and it foamed over burning his feet and shins.,1
An employee was cleaning out a knife gate. The equipment was turned off. While using an airline and nozzle to blow out material the airline hit the on/off switch and the gate was activated. The employee's thumb was crushed under the gate and amputated by the machine.,0
"An employee was trying to change the spacer on a bar cut off saw. He reached back to the controls meaning to hit the ""spacer toggle button"" to adjust the spacer, but hit the ""vice close button"" instead which made the vice close onto the employee's left hand resulting in a partial amputation of the index and middle fingers.",0
An employee was removing plywood forms for concrete from beneath a highway overpass.  The lift bucket was side swiped by the trailer of a semi truck.  The employee suffered broken bones.,1
An employee was throwing trash into a dumpster when a guardrail gave way and he fell onto the trailer injuring his back.,1
"An employee sliced the top of the pointer finger while using a power saw to cut wood. The employee was treated in the emergency room, but was not admitted.",0
An employee was hospitalized after his right index finger was cut to the bone while operating a table saw to cut a particle board.,1
An employee amputated his right pinky finger while troubleshooting the air handling units in the mechanical room.,0
An employee was organizing the stock room and bumped his elbow on a stack of wooden pallets. The elbow later became infected and the employee was hospitalized.,1
"On October 8, 2015, at approximately 12:00 noon, a Georgia Pacific Wood Products employee was performing maintenance on the Number 1 Lathe. The employee was welding with a Lincoln welding machine when his shirt caught on fire. The employee was wearing FR clothing.  The fire watch immediately started spraying water on the employee as the employee laid down in an attempt to smother the flames. The employee suffered second degree burns under his left arm and his left torso area.",1
An employee was manually setting a post driver on the ground and caught their right index finger between the post driver and the hammer resulting in amputation.,0
An employee was working from a scaffold next to and surrounding a semi trailer. The employee fell about 13-15 feet to the floor between the scaffold and the trailer sustaining head and back injuries.,1
An employee was spotting for another employee who was loading a tile installation plow onto a trailer. The spotter was struck by the back filler brace when it broke off and fell from the plow. The spotter suffered a skull fracture and upper back injury.,1
"An employee was painting on the roof of a building and fell approximately 20 feet through a skylight.  The employee was hospitalized.  The incident happened at approximately 1:45pm on October 8, 2015.",1
An employee received a partial amputation to the left pinky finger just below the nail bed after the finger was crushed by a closing door.,0
An employee was clearing a jam on the bucket condenser when the wheel crushed his fingers in between two metal pieces resulting in the amputation of the index and middle fingers on the right hand.,0
"Employee 1 was helping Employee 2 weld a flange to a pipe. Employee 1 was holding a 20"" diameter, 2"" thick flange in place for Employee 2. The flange was held up by a pipe jack.  The flange slipped and Employee 1's fingers were caught between the flange and the pipe jack.  His right middle finger was amputated between the first and second joint and his ring finger was amputated at the first joint.",0
"An employee was walking across the kitchen floor, slipped, and stepped into a hot oil filter sustaining second and third degree burns to the foot.",1
"A city postal carrier was chased by a dog while delivering mail. The employee ran into the street and fell, striking his head on the ground. The employee was admitted to the hospital.",1
"On October 8, 2015, at approximately 12:45pm, an employee was operating an ATV when it began to slide on gravel. The ATV went over an embankment and rolled approximately 100 feet. The employee fell out of the ATV and suffered a fracture to his right ankle.",1
"An employee was operating a ""roto claw"" meat processing machine when a meat hook fell into the machine. The employee reached into the machine to retrieve the hook which resulted in the amputation of the employee's right hand pinky finger and injuries to the employee's right hand ring finger.",0
"While straightening a piece of metal using the piranha press, an employee amputated part of a finger.",0
An employee was erecting a scaffold and fell 10 feet lacerating their spleen.,1
An employee was descending a 16 foot extension ladder and fell six feet to the ground resulting in a lower back injury.,1
"An employee was assisting his co-worker to brace the products (35 inches high by 29 inches wide by 120 inches long) on the forklift. The forklift driver set the double pallet of reinforcement material on to the floor and the forklift backed out. Part of the bottom pallet on the left side broke and the materials started to wobble. The injured employee tried to stabilize it, but part of the top pallet fell on his chest causing him to fall down. As he was bracing his fall, he fractured his left wrist.",1
"The employee was putting sticks onto a conveyor belt when his right hand and arm got caught in the conveyor resulting in three broken fingers, a fractured wrist and abrasions on the arm.",1
An employee was operating a tie down machine in shock packaging. The employee was adjusting a tie strap while the tie down machine was cycling. The employee's finger was caught between the pusher head of the pneumatic tie down machine and the splatter washer resulting in amputation of the left index fingertip.,0
An employee fell 6-11 feet.,1
An employee was attacked by a dog while delivering a package and fell off the steps. The employee fractured the left arm and was hospitalized.,1
An employee had been working for the company for a couple of weeks on a commercial construction site as an apprentice carpenter. The employee was experiencing elbow soreness and went to the local hospital. The employee was admitted to the hospital due to a staph infection in the left elbow.,1
"On October 9, 2015, an employee amputated his left index finger to the first knuckle when he was working with an auto-threader machine in the shop.",0
"An employee was working on a tin roof. The employee stepped off the roof onto an overhang. The overhand collapsed and the employee fell breaking the right hip, arm, tail bone and ribs.",1
An employee stepped on a sample hole causing him to fall and injure the left ankle. The injury required surgery.,1
"The company was having a United Way rally which was done once per year. They were performing a treasure hunt and the employee was going from one station to another. As the employee crossed the gravel parking lot, the employee slipped and fell breaking the right wrist.",1
An employee was struck by a portable electromagnetic drill press and suffered a severe laceration.  This injury later required a partial amputation of the finger.,0
An employee amputated a fingertip while shutting the safety gate to the cardboard compactor.,1
An employee was making deliveries and was found in the back of the delivery truck with a head wound. The employee was admitted to the hospital and received stitches.,1
An employee walking through the salad production area tripped over product on the floor and fell fracturing the right leg.,1
An employee was servicing a mold when a piece of mold fell onto the employee's arm. The employee received an abrasion to the right forearm.,1
Two employees were lowering a gun safe weighing 805 lbs. onto a cart on the customer's trailer. An employee caught their left index finger between the cart and the safe resulting in amputation.,1
An employee was closing a 480 volt disconnect switch when it arc flashed and caused third degree burns to the right hand and first degree burns to the face.,1
An employee was struck by a light pole during an excavation operation resulting in a back injury.,1
An employee fell approximately 8-10 feet from a ladder.,1
An employee was counting bags on a conveyor and caught the left ring finger in the conveyor system resulting in the removal of the fingertip including the nail with no bone damage.,0
An employee sustained a left middle fingertip amputation when the finger was caught inside a material bin/hopper.,1
Employee suffered a fractured neck after falling from the back of truck and landing on the head.,1
"On October 9, 2015, a shuttle driver fell out of a moving vehicle while attempting to rid the vehicle of a bug.  No seat belt was worn at the time.  The employee suffered a contusion to the right leg that required a medical procedure. The employee was hospitalized.",1
An employee was cutting fillers with a radial arm saw and amputated the tip of the right index finger.,1
An employee slipped on the plastic backing/laminate of a peel and stick underlayment near the roof edge and fell 23 feet off the roof resulting in broken ribs. The employees were evacuating the roof due to a storm.,1
"On Saturday 10/10/15 at approximately 5:00 AM, an employee's hand slid underneath a fixed guard at the Department 5540 Pleater. The employee's left index finger made contact with a belt and was pulled into a roller resulting in injury.  Medical provider's diagnosis is that of a partial amputation of the left index finger.",0
"An employee was working by a sheeter roll and was using a wedge so it wouldn't move.  When he placed the wedge, the roll moved and it pinched his fingers.  The roll weighs 2,000 lbs.  The hand specialist had to amputate the right middle fingertip.",0
An employee was cutting a piece of wood with a battery operated circular saw. The blade got stuck in the wood and kicked back lacerating three fingers on the employee's left hand. The employee was hospitalized.,1
"An employee was preparing a Toyota trailer for transportation by placing placards on the trailer.  A coworker was in the tractor cab waiting for the employee to finish preparing the trailer for transport.  The parking brake on the tractor truck was not set.  The tractor truck rolled back and pinned the employee between the trailer and tractor truck.  The injured employee was facing away from the tractor truck at the time of the incident.  The injured employee suffered crushing injuries to the midsection, ribs, and kidneys.",1
"Employee was driving a combat ASV vehicle form a dock area to a staging area.  The vehicle has a hatch.  When the employee was exiting the vehicle, he hit the button to close the hatch.  He pinched his finger in the locking mechanism resulting in the loss of the right ring fingertip.",1
"An employee got his left ring finger caught between a belt and pulley while conducting maintenance on the vacuum fan.  When he jerk his hand out, the skin and nail pulled off the finger to the bone.",0
"An employee was working on an electric motor to get it going. When the motor started, his left thumb tip was amputated by the belt of the motor.",1
An employee fell through a hole in the 3rd floor to the 2nd floor and landed onto a set of chicken cages.  The employee broke two ribs and sustained a fracture in the upper neck.,1
One employee was hospitalized after falling 25 feet inside a boiler at a power plant.  The incident occurred on October 10th at approximately 7:45 am.,1
An employee was rigging a load to be elevated by a crane. He tripped and fell when his feet were pulled out from under him by the tag line. He suffered a fractured left hip.,1
An employee was rushing through the automatic doors while they were closing causing her to trip and fall. The fall resulted in a fracture of the right humerus. The employee was hospitalized and underwent surgery.,1
An employee got both hands caught into a series of rotating chains and sprockets resulting into the amputation of four fingers on his left hand and the tips of three fingers on his right hand.,1
A sanitation employee was working on a steel ladder cleaning the outside of a conveyor frame. The employee slipped while working on the steel ladder and his right hand got caught in the running chain and sprocket. His right hand index and middle fingers were severed. The injured employee was transported to the hospital for treatment.,1
An employee suffered a head and back injury when kicked by a patient.,1
An employee was operating a tug and taking baggage to an aircraft. The employee swerved to avoid another employee in the area and crushed their left foot between a post and the tug.,1
An employee fell off the peanut trailer ladder while a taking moisture reading and broke his left foot/ankle.,1
An employee was lining up two dies and caught their right index finger in the upper die resulting in a partial amputation of the finger.,0
An employee suffered a hernia while lifting potatoes and pumpkins during the day.,1
An employee was trying to line up a symmetrical pump in a pit. The pump dropped on both hands causing severe lacerations to both hands and a partial left finger amputation.,1
An employee was running wood through the gang saw and amputated the pinky and ring fingers on the right hand to the knuckle.,0
An employee slipped and fell on a wet floor suffering a head injury.,1
Employees were passing sheet rock from the first floor to the second floor. The injured employee stepped off of the stack of sheet rock and fell breaking the right leg.,1
An employee was operating a mag drill when his sleeve got caught in the drill causing injury to his left forearm.  He was working in the maintenance department.,1
An employee was walking in the warehouse and fell breaking the lower left leg.,1
"An employee was changing the filter on a hot water system. The employee loosened the water filter cover and was burned on the chest, back and arms by hot water.",1
"On 10/12/2015 at approximately 2:30pm, an employee was working on a table saw with an attachment called the magic molder. The piece of wood kicked back and his left hand got caught by the table saw blade cutting his ring and middle fingers (no amputation). The employee was hospitalized for surgery.",1
An Ironworker was tying rebar 8 feet above ground. He hooked the rebar onto a wall with a hook and then leaned back and the wall hook slid off the rebar and the ironworker fell backwards approximately 8 feet to the crushed gravel ground injuring the right leg.,1
An employee was working in the OCA department attempting to light the OCA furnace with a butane lighter. There was a suspected gas leak that ignited and burned the employee's right arm.,1
An employee tripped on a hand tool electrical cord and fell to the ground causing  a right hip fracture.,1
An employee amputated the right ring finger when clearing a jam on the bottling machine.,0
An employee slipped on a wet floor and fell while providing rehab therapy to a patient. The employee fractured their right wrist.,1
An employee was moving a toolbox on wheels to set up for his shift. It struck a stationary toolbox and the two handles were close enough in height that the employee's left middle finger was pinched off between the two handles. As part of the surgical repair the distal phalange was removed in order to accommodate the formation of a dermal flap.,0
An employee fell while walking on racking on 10/12/2015 at approximately 9:00 am.,1
An employee was hospitalized for a fractured C2 vertebrae when he fell from the bottom step of a front-end loader.,1
An employee received electrical burns to his forehead when he leaned into a live electrical box and contacted the 480V electrical panel.,1
"An employee was operating a crimper machine. While the employee was putting a metal holder piece in place, the machine somehow activated, causing the ram to engage.  The employee's right hand was caught between the ram and the machine deck. The employee was hospitalized for treatment of broken bones in the right hand.",1
An employee was performing roof repair work and fell off the roof. The employee was hospitalized with broken bones due to the fall.,1
A maintenance employee was performing work on the Slingshot ride when the carriage unexpectedly ascended and carried the employee into the air approximately 15 feet.  The employee fell to the ground and suffered two broken ankles requiring hospitalization.,1
An employee was scooping ice pellets from the APC machine while it was running and the press came down and caught his right ring finger amputating it above the 1st joint near the base of the fingernail bed.,1
An employee fell 36 inches off a pallet of shingles resulting in a fractured ankle that required hospitalization.,1
"An employee of the McKinney Drilling Company, LLC, got his right foot caught under the bucket of the Bobcat loading machine. The employee was hospitalized with laceration to the soft tissues and damage to his ligaments.",1
An employee was moving a motorized pallet to a charging station and slipped crushing his foot between two pallets.,1
An employee was opening the wing gate on an asphalt laydown machine and his right leg was caught in the elevator amputating it above the knee.,0
"On October 12, 2015, at approximately 1:30am, an employee suffered the amputation of his left arm (up to the shoulder) after it became caught in the bridle roller, a power unit that moves the strip of metal at 300 feet per minute, while the employee was troubleshooting it.  A guard was removed and the line lock procedure was not used.",0
An employee got his right hand caught in the brush that was feeding into the chipper. His right hand went into the feed wheel and was amputated above the wrist.,1
An employee fell 16-18 feet from an extension ladder and broke both wrists. The employee suffered head lacerations and two torn ligaments in the neck as well.,1
An employee was using a circular saw to cut a piece of plywood and amputated the right index fingertip.,0
"An employee was hospitalized after falling backwards off a 3-foot platform fracturing the L2, L3, and L4 vertebrae.",1
"An employee fell from an drilling derrick while in the process of disassembling the unit.  The employee suffered injuries to the head, face and right leg as a result of the fall.",1
An employee had the flesh removed from the bottom of his right middle finger while using an unguarded table router.,0
An employee was cleaning metal tooling. The tooling slipped and fell onto the employee's fingers amputating the middle and ring fingertips.,1
An employee was removing a sticky matt in front of an elevator when he was stung by a wasp inside the building.,1
An employee's hand was caught under the grinding wheel of a surface grinder resulting in a left middle finger avulsion. The fingertip was later amputated.,0
A maintenance employee fell from the top of a school bus while attempting to remove a strobe light fixture from the top of the bus. The employee fractured the right hip.,1
An employee was operating a chain saw cutting an 8x8 timber when the saw kicked back and hit him in the left side of his chest. The employee was hospitalized.,1
"An employee was operating a gas power chop saw cutting concrete. When the gas cap came off, the chop saw caught on fire. Gas splashed onto the employee and the employee suffered second and third degree burns to his legs, back, stomach, and arms.",1
An employee fell approximately 6 feet as he stepped from a ladder to a platform breaking his ankle that required surgery and hospitalization to repair.,1
"An employee tripped on a fatigue mat, fell, and struck her forehead causing a concussion and hospitalization.",1
An employee was hospitalized with a severe hand injury involving nerve damage after slipping and falling from a branch while attempting to cut down a tree.,1
"An employee was cleaning the powder filler machine. In the process, a conveyor belt pulled in the cloth she was using to wipe down the machine and the tip of her middle right hand finger was amputated. The machine was not locked out at the time of the incident.",0
"An employee was troubleshooting a form fill and seal machine. When the machine inadvertently cycled, the employee's right index finger was amputated above the first joint.",0
An employee was stocking merchandise and fell from a six foot step ladder sustaining head injuries and was hospitalized.,1
"An employee was wire brushing the interior of the #1 recovery boiler's forced draft fan duct. He lost his footing, the fan blades moved, and he fell into the duct. He fell approximately 25 feet to the 10th level of the boiler. He suffered a compound fracture of the right leg and dislocated the right shoulder and elbow.",1
An employee was pulling telecommunication wiring and suffered a hernia.,1
An employee working on the taxi way lights in the air field at O'Hare Airport was hospitalized overnight when incurring electric shock through his hands while working on cables.,1
An employee was loading mattresses on the roller pack machine and got caught in the machine resulting in head and back injuries.,1
"The crew was erecting a scaffold. On his way up the scaffolding, an employee slipped and fell landing on the concrete floor below and inuring a leg.",1
"An employee was working on a 32"" hydroform. The piston had been removed from the equipment. The collar on the center piston slide down and caught the employee's right hand injuring the index finger. It was later amputated at the hospital.",1
An employee fell or jumped off a truck at the loading dock and broke the left leg.,1
"An employee was adjusting a wood molder machine. The employee opened the hood and climbed onto the molding machine partially supporting his body on his right knee and arm. His hand slipped and contacted the machine's ""knife"" amputating the right hand's middle finger distal phalange.",0
An employee sustained a laceration to the hand while cleaning the drywall finisher sprayer.,1
An employee was performing maintenance on a horizontal press. The employee tripped and struck his head on a metal die causing a fracture to the 5th vertebrae.,1
"On 10/13/15 at approximately 10:00 AM a technician was performing maintenance on a customer's oil burner which is powered by 10,000 volts. The furnace was powered up again by mistake and resulted in the technician receiving an electric shock. The technician was admitted to the hospital with burn injuries.",1
An employee was on the bow of a tug boat on the Mississippi River cleaning the cutter head. A large boat passed by causing a wave. The employee put his hand on the bit to catch his balance. The boat rocked up and his right pinky finger was smashed between the bit and the cutter head resulting in amputation.,1
An employee was walking across the drive and was struck by a truck resulting in neck and back trauma.,1
An employee was using a hoist to move a 200 lb. bar. The bar dropped from the hoist and landed on the employee's left large toe resulting in the removal of a small portion of the toe.,1
An employee was hospitalized for inhalation hazards.,1
The employee was driving a company vehicle and making a left-hand turn when he was rear-ended by another vehicle. The employee was transported to the hospital with neck and back injuries.,1
"An employee noticed that a plastic bottle of shampoo had fallen over on the conveyor belt because it was missing the cap. The employee thought he had hit the stop button to shutdown the conveyor belt in order to grab the fallen shampoo bottle, but he didn't thereby his right index finger got caught between the chain and the sprocket. This resulted in the amputation of the fleshy tip of his right index finger.",0
"A conex was being loaded onto a rollback truck. At that time, the rollback bed struck the employee and fractured his femur requiring surgery.",1
An employee amputated three fingers on the right hand while operating the mixer.,1
An employee fractured her finger while unjamming the quarter machine.,1
An employee pinched his right ring finger between a chunk of refractory and a conveyor resulting in the amputation of the right ring fingertip.,0
An employee was walking in the basement when he tripped over a sewer grate and fell resulting in five fractured ribs and shoulder tissue damage.,1
An employee was working on an inspection table when he got his left hand caught in the moving parts of a chain and sprocket assembly. The employee's left middle finger was broken and required stitches. He was admitted for treatment at a local hospital.,1
An employee was checking for gasket pieces in the production line with a metal detector. The machine did not have LOTO and the safety guard had been removed at the time of the incident. The employee's fingers got caught in the machine. The third finger on the right hand was amputated at the middle of the distal phalanx and the fourth finger was avulsed at the distal tip.,1
An employee suffered the amputation of the large and second toe on the left foot when the trailer separated from the tracker and fell onto the employee's left foot.,0
An employee suffered an inguinal hernia requiring surgical repair after tightening a bolt with a small wrench.,1
An employee was operating a plasma cutting CNC machine in auto cut mode. The employee attempted to remove cut pieces of metal from the cutting table. The table struck the employee causing their foot to get caught on a floor grate resulting in a fractured right ankle.,1
The employee was pulling a safety pin out of an outrigger on the telebelt and had his finger pinched in the outrigger. The employee sustained a flesh amputation to the fingertip of the right hand middle finger.,0
"On October 14, 2015, an employee was shoveling asphalt from a dump truck when the employee slipped and their left hand contacted the hot asphalt resulting in burns to the middle and pinky fingers.",1
An employee was on his horse moving 12 head of cattle. A cow charged him and struck the employee's leg. The employee fell off his horse and fractured the right hip and femur.,1
An employee was delivering mail and caught their right pinky finger in the vehicle door resulting in a fingertip amputation.,0
"An employee was kneeling down and felt pain in his knee. His knee was infected, possibly due to a previous kneeling incident where a foreign body was injected into his left knee.",1
"On 10/14/2015, about 8:30pm, an employee was injured on his abdomen by pressurized fluids from an oil well when the coil tubing burst. The injured employee was hospitalized.",1
An employee was descending a 3 foot ladder in a retail store when she missed a step and fell to the ground. She was hospitalized overnight with a possible knee fracture.,1
An employee was removing the side quarter glass on a customer's SUV. The glass fell onto the employee's leg and the hard plastic molding on the glass lacerated the employee's leg.,1
"An employee was selecting cases in the freezer area while driving a long jack. As he stepped off the long jack, he was still holding the accelerator and pinned himself between a rack and the long jack resulting in fractured ribs and a laceration to the lungs.",1
An employee was under a house checking the propane line for leaks. While he was under the house he was bitten by a snake.,1
"An employee was operating a reach truck. When he stepped off the truck to pick up a fallen box, an order selector (cherry picker) ran over his right foot.",1
"A crane operator caught his right middle finger between two ""I"" beams while repositioning the beans using a gantry crane. The fingertip was amputated.",1
An employee was on a ladder to paint the side of a townhouse. The ladder slipped out and the employee fell to the pavement below fracturing both wrists.,1
"An employee was removing a 14 foot jack in a parking garage by releasing clamps on the top and the bottom.  While the employee was releasing the bottom clamp, the top clamp that was previously loosened fell and caught his finger between the top clamp and the back. The left middle finger was amputated.",0
"An employee was returning from break and fell, fracturing the right knee.",1
An employee was admitted into the hospital for severe dehydration.,1
An employee suffered leg injuries when a backhoe ran over his leg.,1
An employee fell five feet from the edge of the scalder.  Fall protection was not used at the time of the incident.,1
An employee was setting up a lathe. A part fell and his hand was caught between the part and the chuck lathe severely lacerating the middle and ring fingers on the right hand.,1
An employee was in training to use a metal stamp machine when his left hand got caught in the machine crushing the left ring finger.,1
An employee was working with a pipe rolling machine and got their left hand caught in a roller resulting in the amputation of the ring finger.,1
An employee was cleaning sludge from the storm water/spill collection sump at the tanker unload area. He was attempting to return a section of heavy metal grate back into the operational position when he amputated his fingertip.,0
"An employee was standing on the bottom rung of a four foot ladder using a pneumatic sander on the bottom of a fiberglass swimming pool and fell, striking his left hip on a five gallon bucket.",1
"On or about October 14, 2015, at 5:15 am the employee opened the back of the truck and mis-stepped into the six-inch gap between the loading dock and the back of the truck. His left leg plunged into the gap up to his thigh. He was hospitalized for observation and care of a deep left thigh contusion.",1
"An employee was operating a saw to cut pieces of wood. The employee reached in to get a piece of wood out and stepped on the peddle, activating the saw and amputating the tip of the second finger on the left hand.",0
An employee was pushing a heavy flatbed cart and pinched their fingers between the cart and the door bracket severing the tip of a finger at the first knuckle.,1
"While descending the scaffold ladder, an employee lost his footing and fell 12 to 15 feet to the ground breaking his left leg, right heel and left wrist.",1
"An employee was working on the caser line in the packaging area adjusting the caser machine. In the process of moving away from the caser machine, the employee was knocked down by an oncoming forklift delivering a load of materials in the packaging area. The employee hit his head on the concrete floor and was hospitalized for a fractured skull and bleeding in the brain.",1
A roofing employee slipped and fell from a 12 foot ladder resulting in internal injuries and possible fractures.,1
An employee fell approximately 10 feet sustaining unknown injuries and was hospitalized.,1
"An employee was trimming tree branches from a ladder, lost his balance, and fell approximately 8 feet to the ground, fracturing his right-side ribs. He was hospitalized.",1
"An employee was working at a desk picking recycled contaminants off a block of bale, when she bent down and was struck by a block of bale. She sustained a fractured left leg and pelvis.",1
"An employee was using a manual crimping tool to bend scrap coils. While using an upward pulling motion to crimp the clip, he felt pain in his abdomen and suffered a right-side abdominal hernia.",1
An employee's arm got tangled in tarp as he tried to keep it tightly rolled in the tarp equipment's roller. Both bones in his left forearm were fractured.,1
An employee was clearing a jam on the tack machine and fractured the right thumb.,1
"On 10/15/2015 at approximately 12:00 p.m., an employee was performing maintenance work on a milk-filling machine when his right index finger got caught on the machine belt. The employee was hospitalized for surgery to re-attach his right index fingertip.",1
An employee slipped and fell while getting out of the powered industrial truck.,1
A maintenance employee amputated his right fingertip while operating a bagging machine.,0
"While an employee was getting out of a car, the car door slammed on and partially amputated the employee's pinky.",0
"A trackhoe operator was cleaning out the bed of a Kenworth Tri-axle dump truck.  The dump bed was raised and the trackhoe was scraping material out of the bed.  The injured employee approached the dump truck while this was occurring and proceeded to stick his head in between the dump bed and the swing gate to see inside. The excavator made contact with the bed and caused the swing gate to move, catching the injured employee's head between the truck bed and the swing gate.  He was admitted to the hospital with a fractured skull.",1
"An employee was situating a ladder to dust the window ledge and wash the windows. While attempting to center his feet on the ladder rung, he lost his balance and fell approximately 8 feet, fracturing his right pelvis.",1
"An employee was accessing a safe in the cash office to get deposits. While closing the door to the safe, his finger got caught, amputating his left index fingertip near the first knuckle.",0
"An employee was descending a staircase. When he reached the landing, he blacked out and fell 10 feet to the concrete floor below, breaking his hip and fracturing his pelvis.",1
"An employee was inside a box truck unloading plants. He missed his step and fell 4 feet off of the truck to the dirt ground. He broke his cheek bone, clavicle bone, and several ribs, requiring hospitalization.",1
"An employee was lowering the gate on a baler when the fifth digit on her left hand got crushed, requiring hospitalization and surgery.",1
"An employee was sprayed by baby food product and metal while checking for clogs in the system line, sustaining burns on the right hand, right forearm, chest, and upper lip. The baby food product was approximately 200 degrees.",1
"An employee was cleaning a transfer belt when his hand got caught between the belt and the drive roller. He was hospitalized with severe injuries to the second, third, and fourth digits on his right hand.",1
"An employee was welding with a cutting torch when a piece of hot slag landed on his shirt, which caught on fire. He suffered third degree burns to his left arm, hand, shoulder, and torso.",1
"An employee was putting air into a tire and having trouble getting the tire bead to seal. The employee put a rag in between the rim and tire to assist the seal. When the employee went to remove the rag, the tire sealed and caught his right index finger, amputating the fingertip.",0
"An employee was covering a manhole with a manhole cover. The manhole cover flipped up on top of the employee's right foot, breaking four bones.",1
An employee was working on the dry grocery side of the warehouse. The employee came around the corner while riding a stand up forklift and ran into the forks of another forklift. A fork from the forklift punctured his foot.,1
"An employee was performing maintenance on a mobile belt system when his fingers were pulled into the conveyor belt, cutting and tearing the tendon on his middle right middle finger.",1
"An employee was performing maintenance on a slit line using an Allen wrench. The slit line suddenly energized and a clamp came down, pinching and bruising both of the employee's forearms. LOTO was not performed at the time of the incident.",1
"An employee walking on a vinyl floor in the office tripped and fell, breaking the right tibia and fibula bones. The employee required surgery and overnight hospitalization.",1
"On 10/15/2015, at about 10:00 p.m., an employee was taking a sample from a petroleum unit of the refinery. During the sampling process, the glass bottle ruptured and broke. The glass debris injured the employee's face and left eye.",1
"On 10/15/2015, at about 12:00 p.m., an employee was climbing a 12-foot fiberglass ladder. When he reached approximately 10 feet, he fell to the ground. He injured his knee and the right side of his head, requiring hospitalization.",1
An employee was cutting meat when his right-hand thumb tip contacted the blade of the band saw and was amputated.,0
An employee was welding a beam during steel erection activities for a commercial building. The employee's knee got caught between the boom net and a beam.,1
An employee was struck by an automobile while gathering carts in the parking lot. The employee suffered severe leg injuries and bleeding on the brain.,1
An employee was performing a walk around visual inspection of the crusher recycler when he tripped on a piece of rebar and fell hard on his left hip and forearm. His hip broke and required surgery.,1
An employee was cleaning equipment with a water hose and got a hand caught in the potato line auger. The right hand was amputated.,0
An employee raised a platform scale out of the framework.  The scale fell on the employee's hand and amputated the left thumb.,0
A machine stopped feeding. The employee reached into the machine and amputated three fingers. The machine was guarded at the time.,1
The elevator lifting a 30 foot long pipe at an oil well shifted causing the bottom of the pipe to strike an employee in the back. This employee then fell against a second employee pushing the tongs into his face and causing employee 2 to fall and strike his head against the guardrail. Employee 2 was knocked unconscious for several seconds and was hospitalized with a fracture of the bottom orbital bone below the left eye.,1
The employee was trying to clear a paper jam in the machine and caught his finger in the chain and sprocket resulting in a fingertip amputation.,1
An employee was hospitalized with an broken wrist after slipping on some water on the floor and falling in the produce department.,1
"An employee was operating a loaded pallet jack and caught their leg between the pallet jack and the railing at the loading dock, fracturing it.",1
An employee was reassembling and calibrating  the Cherry Burrell Machine and leaned under the machine while it was running.  The employee's hand slipped into the point of operation amputating the right hand index fingertip.,1
An employee was hospitalized for injuries sustained while fighting a vehicle fire in a commercial parking garage. The employee suffered smoke inhalation.,1
"An employee was clearing a pipe line using nitrogen to pressure the line. The employee disconnected the nitrogen line, which was not clear or de-pressured at the time. Product sprayed out on the employee, causing first and second degree burns to the left side of the employee's head, the left arm, and both legs from the knees down.",1
"While changing a machine die, an employee's left index finger got caught between the hydraulic clamp and cylinder, resulting in a finger amputation.",1
An employee's right index and second finger were caught under the ram of a mechanical power press.,1
The employee slipped on the job while wearing shoe coverings and fell breaking her wrist.,1
"An employee was welding on a heater. While exiting the heater, he stepped on a beam and his foot got stuck in his safety harness. He fell on his right knee and fractured his tibia.",1
An employee was inspecting an ammonia leak in the refrigeration system and went into shock due to ammonia exposure.,0
"Two employees were engaged in horseplay and one employee was knocked to the ground, suffering a left femur fracture.",1
An employee securing a piece of trim from a ladder in an automated car wash missed a rung and fell off the ladder resulting in admission to a hospital for a broken hip and surgery.,1
An employee fell 6' from a concrete pumping boom to the ground fracturing his left wrist and suffering a head laceration and bruising.,1
"An employee fell approximately 6 feet to the ground while climbing a stepladder, breaking his clavicle and sustaining bruises and lacerations.",1
On 10/16/15 an employee removed the guarding from the chain on a fan fold machine while the machine was running. The employee was attempting to replace the chain after the chain had come off the machine. The employee got his fingers caught in the machine. On 10/19/15 the employee had surgery for a partial traumatic transphalangeal amputation of the left index and middle fingers.,0
"An employee using a pressure washer was injured when the wheel that the employee was spraying shattered. The wheel fragments struck the employee's face, causing his prescription eye glasses to break. Pieces of the eye glass frame became lodged in his eye. He was hospitalized.",0
An employee was hospitalized for chemical burn to the eyes.,1
An employee injured the T10 and T11 discs after tripping on a trash bucket and fatigue mat and falling against a table.,1
"On October 16, 2015, around 11:00 AM, an employee was trying to untie a knot in a mule line when he was electric shocked and suffered electrical burns to the left ring and pinky fingers and the left knee. He was hospitalized.",1
"On Friday, October 16, an employee was preparing to lower the drill bar from the rest of the drilling machine. The bar separated from the tool that was holding it and fell on the employee. He sustained four fractured ribs and a blow to the right side of his face and left shoulder.",1
The company was logging a forest track (land) of nearly 100 acres when an employee was run over by an empty tractor trailer. The employee suffered eleven broken ribs and a fractured hip and pelvis.,1
"An employee was lifting equipment (flat top for grill) during cleaning activities. The equipment was placed down on his finger, cutting his fingertip.",1
"On or about October 16, 2016, while operating the feather press machine, the employee's foot was smashed.",1
A temporary employee was hospitalized after shooting himself in the left foot/ankle with a nail gun.,1
"A mold operator was hospitalized when he fractured his pelvis during a fall. The injured employee along with another employee was emptying a bin (30 gallon waste container) into a Gaylord box (1 yard cardboard box), which rests on top of a 6 inch riser. It is believed that the employee's toe became trapped underneath the riser and when the employee turned around after placing the bin on the riser he fell and landed on his hip causing the left side pelvic fracture.",1
A temporary employee was working on a scaffold approximately three feet above the ground when he fell off the side and broke his the radius and ulna on the right arm and the radius on the left arm.,1
"On or about October 17, 2015, an employee walking the plant was struck on the hard hat by a hose that was dropped by another subcontractor. The injured employee was admitted to the hospital for back pain.",1
"An employee was installing a 24V DC transformer inside a control panel with 480V wires.  During this process,  an arc flash occurred that caused second degree burns to the employee's hands and face.  The employee was hospitalized.",1
"On October 17, 2015, an employee was operating a table saw to cut decorative strips of metal and cut his right thumb. He was admitted to the hospital and had surgery the next day.",1
An employee was inside an M-1 Tank. He pulled himself up through the turret and pinched his fingertip in a metal joint on the headrest.,0
An employee was removing a sheet of veneer from the top deck of the dry out-feed conveyor when a second sheet of veneer fell and lodged in the employee's right forearm.,1
An employee was pushing down on a table and injured their back.  While attempting to stretch it out the employee felt a pop.,1
An employee fell from a ladder and broke a hip.,1
A machine operator tripped over the floor-mounted automated palletizer sensor and fell striking his head on the palletizer machine.,1
An employee was using a saw to cut lumber and amputated a finger.,0
An employee was working to undo forms around a casting area using a gantry crane. The employee was holding on to the cables at the main block as the crane was raised and caught his fingers between the cables and the pulley causing an amputation of his pinky fingertip and a partial amputation of the right ring finger.,1
"An employee was walking, caught her shoe in the carpet and fell suffering a back injury. She was admitted to the hospital.",1
"A temporary employee had his left hand middle finger amputated while using a cut-off saw to cut up scrap OSB on or about October 17, 2015.",0
An employee was walking to the cash register and fell breaking the right leg and hip.,1
"On October 18, 2015, an employee was mopping the stairs of a double landing staircase to the second floor. The employee was found laying on the first landing. The employee is hospitalized with a severe head injury and possible broken neck.",1
An employee twisted and broke his ankle while investigating the odor of smoke coming from the facility's basement.,1
An employee was moving a pallet with a forklift. The pallet was attached to the forklift with a chain. The employee tried to manually move the chain when the forklift rolled and pinched his fingers between the chain the vertical upright. His pinky finger was amputated.,1
"On or about 10/18/2015 an employee was attempting to clear a jam in a parcel bundling machine and climbed on top of a rolling wire cage container approximately 41"" high x 48"" long x 40"" wide.  The employee slipped from the cage and fell to the floor fracturing their ribs and collarbone.",1
"On or about 10/18/2015, an employee was running an electrical conduit in the attic. When the employee went to get a level, the employee fell through the attic access to the ground and injured their lower back.",1
An employee was operating a commercial dishwasher.  While inserting a dish rack her gloved finger was caught or pinched and the tip of the left pinky finger was amputated.,0
"An employee amputated two fingertips, pinched a third finger, and fractured a finger on the right hand while cleaning ink off print rollers on a machine that had not been shut off and isolated.",0
"On October 19, 2015, at about 11:00 a.m., an employee was on a step ladder installing drywall with a drill driver. He fell off the ladder to the concrete floor and broke his right arm. He was hospitalized and required surgery.",1
"An employee was operating a dump truck in the orange grove. The truck was loaded with shell rock to be dumped to grade a road. Upon lifting the bed, contact was made with an overhead power line. Upon exiting the truck the employee was shocked and received electrical burns to the left arm and foot.  The employee was hospitalized.",1
"An employee was aligning and storing rack vertical components by hand. His left middle fingertip got caught between two rack foot plates; it was crushed and amputated (distal phalanx, part of nail).",0
"An employee was looking into a hopper containing molten plastic to determine why the hopper was not running smoothly. Molten plastic backed up onto the employee's hands, burning them and requiring surgery.",1
An employee was involved in a motor vehicle accident while on the job and driving a company vehicle.,1
"An employee observed two individuals behind a building that appeared to be fighting. The employee approached the individuals and questioned what was going on; he then told them that he was going to call SAPD.  One of the individuals knocked the phone out of his hand, and then both individuals attacked him. He was hospitalized.",1
"An employee was passing instruments to the surgeon during a surgical procedure. The employee was turning around to the operating table to retrieve an instrument for the doctor when she tripped on the doctor's foot.  She fell to the floor on her left side, fracturing her left shoulder and left hip.",1
An employee fell from a ladder and broke a leg.,1
An employee was attempting to align the hydraulic mast tilt cylinder on a forklift so he could insert the locking pin. His finger was in the pin hole while he instructed the forklift operator to lower the hydraulic mast so the pin hole would line up and the pin could be inserted. He suffered a partial amputation of his left index finger.,1
An employee was clearing a jam in a plastic grinder while the machine was running and three fingers were amputated.  The machine was not locked out.,0
"An employee was cleaning ride-on trowel equipment. As he was taking the clip-on pan out of the ride-on trowel, the round pan (48 inches in diameter; 25 pounds) fell on his right leg and broke his right ankle. He was hospitalized.",1
An employee's hand got caught in a bottle molding machine during cleaning activities.,1
An employee was cutting meat in the meat department when his right hand ring fingertip contacted the band-saw blade and was amputated.,0
"An employee was cleaning a 2-gallon tea urn. He picked it up and attempted to pour it out. Some hot liquid made contact with his left forearm, resulting in second degree burns. 

He was hospitalized.",1
"An employee was climbing a 22-foot wall using a 30-foot ladder. The ladder hooks were not latched at the time, causing the ladder to slide. The employee fell approximately 16 feet and landed on a sand pile.  The employee's lower right leg broke, requiring surgery.",1
"An employee was felling a tree when the cut tree fell, rebounded, and struck the employee in the left leg, causing a leg contusion.",1
An employee was pushing a dumpster into an enclosure. A gust of wind caught the enclosure door and slammed the door into the dumpster catching the employee's left hand middle finger resulting in amputation.,0
On 10/19/2015 at or around 11:15 a.m. a temporary employee was struck by a garbage truck and pinned between a utility pole and the rear bumper of the truck. The employee then fell off the rear of the truck. The employee was hospitalized with a fractured pelvis.,1
An employee working from a swing stage scaffold was struck in the head by the counterweights of a winch that was being used to hoist mud/stucco inside 5 gallon buckets.,1
An employee working on the shipping line conveyor got his right hand caught in the conveyor belt pulley amputating the tip of his fifth digit.,0
"The freight elevator door was left open, which causes a buzzing sound (alarm). The employee walked over and attempted to close the door to stop the alarm. As she pulled the metal door down, the door caught and amputated her left index fingertip.",0
"An employee operating a standup powered industrial vehicle (PIV) was backing out of an aisle into the main aisle. He struck a pole at the end of the storage rack, and his left leg got crushed between the lift truck and the pole.",1
An employee's leg was caught in a conveyor.,1
"On or about October 19, 2015, an employee's left-hand index finger was amputated by the chain of a red iron chain conveyor. The employee was hospitalized.",0
"In the planner area, an employee was piling lumber that was being transported by a lumber chain.  One of the chains became jammed.  The employee reached between the chain way because the chains were doubled over. Energy was stored in the gear box due to the jam. The employee manually tugged the belt associated with the belt/pulley mechanism for the 2 hp motor and gear box.  The motor/gear box drives the chains.  When the employee tugged on the belt, it released the stored energy from the jammed gear box.  The employee's fingers went into the nip point created by the belt/pulley and three fingers on the right hand were severely fractured. The ring finger also had skin removed.",1
An employee fell from the roof of a building while removing cable.,1
An employee was weed-eating when a rock was thrown into the employee's face.  Safety glasses were worn. The employee was unstable and disoriented and may have suffered a head injury.,1
"An employee was operating a machine that packages frozen pizzas into cartons when her hand was pulled into an in-running nip point, amputating her left-hand middle fingertip.",0
An employee was acting as a signal person for a driver backing the truck. The employee's left hand was caught between the corner of a building and the truck. The employee underwent surgery to repair a fractured thumb and the surrounding soft tissue.,1
"While conducting wind turbine maintenance operations, an employee slipped, striking and bruising his upper right leg on a turbine support structure.",1
An employee was using nitrogen air to purge particles from a vessel. The chemical spray used to purge the vessel got on the employee's wrist and face. The employee sustained a chemical burn to the left wrist.,1
An employee was pulling a portion of a tunnel section out of a shaft when he fell from an elevation onto a piece of broken slab and broke his jaw.,1
An employee was rigging pilings for hoisting and pinched a finger between the sling and piling. The tip of the index finger was amputated and reattached.,0
An employee was mowing the grass when the lawn mower rolled over and crushed his pelvis.,1
An employee's hand got caught between the conveyor belt and roller on a sanding machine.,1
"On or about October 20, 2015, an employee's hand got caught in an auger while servicing it.",1
An employee involved in an automobile accident suffered a broken wrist and leg.,1
An employee was prepping for concrete pouring work when his finger got caught in a concrete drill.  He was hospitalized for a potential finger amputation.,1
An employee was struck in the face by a nail from a second employee's nail gun and admitted to the emergency room. The second employee shot himself in the stomach with the nail gun and was hospitalized.,1
"An employee was in bike training. While trying to navigate some stairs, he lost his balance and fell. He injured his arm and was hospitalized for surgery.",1
"On October 20, 2015, an employee's left index finger got caught in a flywheel while setting up a mechanical power press. Her finger was amputated to the first knuckle. The flywheel was unguarded at the time of the incident.",1
"An employee was walking on the sidewalk inside the construction perimeter. He tripped over a discharge hose and fell onto his side, breaking two ribs and puncturing a lung.",1
An employee was attempting to make a delivery and was operating the dock gate that goes in the trailer. The employee was pulling up the dock plate and moving it forward when the employee's left middle finger got caught between the dock plate and trailer. The employee's left middle fingertip was amputated.,0
"While reducing the height of a load on an I-Beam/Rail Trailer and re-positioning it on the blocks, the employee checked under it before it was lowered via hydraulics. The rock truck shifted and rolled forward trapping him between the neck of the trailer and the front bumper of the truck. Another driver jumped into the rock truck and backed it off the employee. The employee was hospitalized with a crushed pelvis and other internal injuries.",1
"Employees were using a Hydrovac to find an underground line.  The Hydrovac has a nozzle to shoot high pressure water and suck up water and mud.  One employee works the vacuum hose and another works the water nozzle. The employee working the vacuum hose saw a rock that he didn't think would go up the vacuum hose. When he reached down to pick it up, he stepped in front of the water nozzle.  The pressurized water punctured his knee on the inside of his right leg.",1
"An employee was starting up an extrusion machine when the machine ""kicked out"" or faulted. The employee's gloved hand was caught in the auger. The employee sustained a partial amputation of the right index finger between the first and second digit.",0
"An employee was delivering a pallet to a local business using a manual pallet jack. During the delivery, the employee moved and pulled or strained a muscle in his side and lower back.",1
"While moving a stack of doors, an employee's finger was caught between doors resulting in a fingertip amputation.",0
"An employee was helping to put valves in place on a flatbed truck. A valve shifted and his hand got pinched between two valves, amputating (de-gloving) his right index finger.",0
"On 10/20/2015 at about 11:45 AM, the injured employee was in the process of repositioning forks on a rough terrain forklift with his bare hands (no gloves). His right hand was near the tip end and his left hand at the heel end. He lifted with his right hand so that he could slide the fork along the fork bar. His right hand slipped and his left little finger got caught between the heel and the carriage. The distal end was crushed and severely lacerated (partial amputation).",0
"On 10/19/15, at approximately 5:20 AM, an employee was driving a truck when she hit a washout and lost control of the vehicle. Her right wrist got caught between the steering wheel and something else (unknown) and broke. She was hospitalized.",1
"An employee was walking through the parking lot and passed a large/long concrete barrier. She tripped over the foot of the barrier and fell to the ground, breaking her right wrist.",1
"On or about October 20, 2015, an employee was cutting a piece of wood with a circular saw when the saw kicked back and cut his upper right leg. He was hospitalized.",1
An employee was transferring fertilizer from a tinder truck to a field applicator when he fell off of the field applicator. He was hospitalized with a broken collarbone and broken vertebrae in his neck.,1
"The employee was preparing to operate the water stripper gun to perform a quick test prior to beginning work. During the test, a particle lodged in one of the newly installed jewel tip nozzles of the whip hose causing a sudden surge in pressure. This resulted in a failure of the whip hose (the pressure surged to 18,000 PSI and was rated for 22,000 PSI). High pressure water exited the hose from the break and struck the employee's wrist.",1
"On 10/20/15, an employee fell backwards into an open pit 8-10 feet deep and fractured ribs.",1
"An employee was clipping paper on a white board. When she turned away from the board, she tripped on the leg of the white board and fell striking her left knee on the floor and her right knee popped.  She felt pain in the right knee and had difficulty lifting herself from the floor.  She was hospitalized overnight with a sprain, strain injury.",1
A reversing forklift struck an employee and ran over his right foot.,1
"On October 20, 2015, an employee was attempting to remove an air tank valve with a wrench when he lost his footing, fell, and broke his right femur. He was hospitalized.",1
"An employee was operating an ATV on a gravel road that was recently graded, when the vehicle tipped over and pinned the employee's arm to the ground.  The employee sustained a fracture to his upper left arm and wrist and a dislocated shoulder.",1
"While operating a stretch wrapping machine, an employee's finger got caught between two rollers. Approximately two-thirds of the employee's right little finger were amputated.",0
"While an employee was repairing/moving an electric powered pallet jack, the jack backed over his foot, lacerating and breaking bones in his right foot.",1
"Three employees were performing leak testing on a 54-inch sanitary pipe when the testing device (80 lbs. air pressure) exploded and struck an employee, causing life-threatening head injuries and requiring hospitalization.",1
"An employee was removing mold using a rollover machine when a box pattern fell on his left hand, amputating two fingers.",1
An employee was using a power tool to install a support bracket. The screw went through the bracket and cut his finger. The cut became infected and the employee was hospitalized.,1
"On 10/21/2015, a roofing employee was performing a roofing tear off of dead wood. During the replacement of dead wood the worker ran out of replacement wood. The worker covered an opening in the roof with felt paper. The employee lost his balance and jumped from the roof of a single story mobile home instead of falling through the felt covering. Both heels were injured.",1
An employee was pulling and laying down pipe and amputated the third digit on the right hand from the tip to the knuckle.,0
"On 10/21/15 at approximately 3:30 PM, an employee was cutting banding material off a stack of steel beams. The steel beams were 3 feet high and 20 feet long and came in stacks of two. They had wood blocking that held the two beams and steel banding material together. The employee was on the ground between two stacks of beams and was using a circular grinder to grind off the banding material. When he cut the last beam, the beams fell on him resulting in his hospitalization for a broken pelvis, right femur, and right tibia.",1
An employee was inserting a piece of metal inside a piece of vinyl window profile when she got a splinter. She and a co-worker removed the splinter.  Later she went to the doctor to receive further treatment and was hospitalized for an infection.,1
"On 10/21/2015, an employee was removing shrink wrap from a pallet and got her feet tangled in the shrink wrap resulting in a fall.  She fractured her left leg and was hospitalized.",1
An employee was mowing a lawn using a riding mover. He struck a wire and fell off the mower. The mower ran over his right hand severing it.,1
An employee suffered an amputation injury with a pipe threader.,1
An employee was assisting with surgery and struck his head on overhead light in the operating room when he stood up. He had a headache and tingling in both hands afterwards.,1
"An employee was purging the ambient air on the compressor displacing it with natural gas. The night before, an electrical storm had shorted the motor. While purging the line, a spark ignited the natural gas causing a flash fire. The employee received burns on his face and hands and was hospitalized.",1
"An employee was cutting straps from boxes at the loading dock with a knife. The employee's hand slipped and he cut himself in the lower, right abdomen.  The employee was hospitalized for treatment of small perforations in the small intestine.",1
"The employee was welding from a spider lift. While moving the spider lift from one location to another, the employee got his hand caught between the handrail and a steel plate resulting in the loss of the left ring fingertip (bone exposed).",1
"An employee was nailing shingles at the edge of the roof of a new one story house when he lost his footing, fell 8 feet to the ground, and landed on a pile of wood. The employee was not wearing fall protective equipment. He was hospitalized with six broken ribs.",1
"An employee was injured when the ladder he was using slipped, came loose from a rope connection, and fell. The employee fell approximately 9 feet to the next level. He was hospitalized with three broken ribs and a dislocated shoulder.",1
An employee was delivering vehicles to a car dealer. The employee climbed up the transport and was opening the back door of a vehicle when he lost his balance and fell 12 feet to the ground breaking both legs.,1
An employee had his back towards the machine when his gloves were caught in the metal slitter machine. This caused his arm to twist and pull resulting in a fracture to his upper right arm above the elbow. The employee was admitted to the hospital for surgery.,1
"An employee was bitten on the right index finger by a copperhead snake, resulting in hospitalization and treatment.",1
"The employee was watching a vacuum truck.  For shade the employee sat underneath a gangway.  A tanker vessel traveled by where the barge was stationed.  The waves rocked the barge allowing the gangway to fall on the employee.  The employee's entire right side, upper torso, back and pelvis sustained injuries.",1
"On 10/21/2015, an employee was sanding a piece of stock on a lathe when he was pulled into the rolling stock fracturing his left hand. The employee was hospitalized.",1
"The employee was walking, tripped over a wooden pallet, and fell breaking his hip.",1
An employee was clearing a jam on the Standun Bodymaker #34.  The machine was running at the time. The safety interlock malfunctioned and the horizontal press made a full revolution crushing the employees left pinky finger that was later removed at the hospital.,1
The injured employee was cleaning at the end of the shift. She proceeded to put paper in a recycling bin and turned around to return to the Mega-cutter.  As she passed by the weight scale she stepped diagonally across the ramp and caught the back portion of her foot on the ramp causing her to trip.  The employee fell forward onto the floor landing on her right hip and fracturing it.,1
An employee was moving a 220 pound cutting edge (blade) onto a pallet using a forklift. The blade was unstable and the employee exited the forklift to steady the blade. The blade shifted and fell onto her left ring finger resulting in the amputation of the finger up to the first digit.,0
An employee tripped over a pipe and fell to the floor resulting in a knee contusion that became infected requiring hospitalization.,1
"On 10/21/2015, an employee was operating a folding machine when her left pinky fingertip was caught in the folding bar. An emergency stop was employed by a coworker. As the employee removed her finger from the machine, her fingertip was severed.",1
An employee carrying a nail gun tripped with his finger on the trigger and the nail gun shot a nail into his knee.,1
"An employee preparing to perform concrete work on a building climbed up an extension ladder, lost his footing, and fell from the fourth rung fracturing his left knee cap.",1
An employee attempted to hurdle a cart return stall in the parking lot and fell fracturing the lower left arm and sustaining facial lacerations. The employee was admitted to the hospital to set the fracture and is scheduled to have rods placed in the arm.,1
An employee was walking down the hallway when he tripped and fell fracturing the hip and thigh.  The employee was hospitalized.,1
An employee was pushing a pocket stream feeder cart sideways across the floor. The cart tipped over and fell onto the employee's foot crushing two toes that were later amputated.,0
An employee was playing tag with children and turned his ankle.,1
An employee was starting a 300 gallon fertilizer pump and amputated the right ring finger when his finger was caught in the flywheel.,1
An employee was lifting a 70 lb. section of metal duct that needed to be welded to a ship bulkhead that was under construction. The metal duct slipped from the employee's hands and his left index finger was pinched between the metal duct and an I-beam flange. The employee's left index finger was amputated by the emergency room doctor.,0
An employee was on the ground performing a safety check on his fork truck when another fork truck driver backed into the aisle and pinned the injured employee between the two fork trucks. Both lower legs were crushed.,1
"The employee is a truck driver. The employee drove to another employer's location to deliver a tractor. While unloading the equipment off the trailer, the employee fell from the trailer and fractured a hip.",1
A forklift operator was in the process of moving a load when the load fell off of the forks and struck a nearby worker on the foot resulting in broken and lacerated toes. The injured worker was hospitalized and requires surgery.,1
An employee was making an adjustment to a pneumatic strapper head that was energized. Pneumatic pressure kicked back pinching the employee's right ring finger between the adjustment tool and the metal plating causing a loss of soft tissue (no bone) requiring surgical repair.,1
"A company truck was overheating and an employee removed the radiator cap in an attempt to fix the problem.  As he removed the cap, hot fluids exited the radiator and splashed into the employee's face, burning him.  The employee was hospitalized.",1
"A worker was at a customer's facility repairing a commercial washing machine that was not properly de-energized. The worker came into contact with a live transformer and burned his right arm, resulting in hospitalization.",1
An employee stepped off a platform approximately 12 inches off the ground and broke his right ankle.,1
An employee amputated the left middle fingertip while using hedge trimmers.,0
"On October 22, 2015, at approximately 2:00 pm, an employee was sweeping the floor of a loading dock located on a building under construction, opened an overhead door, and fell approximately 4 feet to the ground below. The employee was admitted to the hospital for a broken hip.",1
"An employee was handling a squeezer and had his left hand on the roller. When he pressed the controlling panel with his right hand, his left middle finger got caught by the roller on the squeezer resulting in a broken and lacerated finger.",1
An employee was assisting the machine operator in setting up the stamping machine. The machine cycled fracturing and lacerating the employee's left index finger. The employee was hospitalized overnight.,1
An employee amputated two digits on the left ring finger while operating a milling machine.,0
"An employee was in training on a new line when a piece of wood flooring came loose under the vacuum lift.  The machine was turned off, but remained energized.  The employee climbed over the fence around the vacuum lift, tripping a sensor, and the vacuum lift came down on him with wood flooring attached.  The employee suffered fractured back bones and broken ribs.",1
An employee fell approximately 18 feet from a ladder resulting in a left elbow fracture.,1
"  On 10/22/2015 at approximately 10:30 pm, an employee was loading a stack of papers (car maps) into the folding machine when he felt a pop in his back. He finished his shift and went home.  He was later hospitalized for a back injury that required surgery.",1
"An employee was working with seven other employees to manually lift, move and place a section of fencing. While setting the fencing down, the injured employee's finger was pinched resulting in the degloving of the left hand middle fingertip.",0
An employee was standing on the ground while new cable was being pulled onto a power pole.  A wire grip device failed and loose cable on the ground came under tension knocking the employee to the ground causing neck and wrist fractures.,1
An employee was lifting a steel beam with a forklift. The beam fell on the employee crushing an ankle.,1
An employee was operating a cat head on the drilling rig and amputated fingertips.,1
A truck driver completing his delivery at a store was closing the roll down door of the truck with his right hand and closed the door on his left hand. The employee fractured the middle finger on his left hand that required surgery to repair.,1
An employee was attempting to put a chain back on the sprocket drive of the wood hog machine. Another employee started up the machine and the injured employee's fingers were caught in the machine resulting in the amputation of the pinky fingertip and a broken ring finger.,0
An employee was dumping powdered graphite/carbon debris from a drum suspended from a crane by a nylon sling into a hopper on the ground. The employee's left hand was on the hopper as the caked carbon material fell out of the drum and into the hopper causing the hopper to shift.  His hand was caught between the edge of the hopper and the drum resulting in the amputation of the left pinky finger between the first and second knuckle.,0
"On or about October 22, 2015, at 3:45 pm, a temporary employee was injured when he fell approximately 12 feet from an upper level. The employee attempted to stand on a pallet that was on the forks of an elevated forklift when the pallet broke. He was hospitalized with injuries including broken wrists, ribs, a broken shoulder and a broken cheekbone.",1
An employee fell and suffered a hip injury requiring inpatient hospitalization.,1
"An employee was repairing a blower machine from a step ladder.  While on the ladder and using a crowbar, the employee lost his balance and fell to the floor striking his head and back resulting in a concussion and back injury.",1
A security guard at the guard shack was struck by a car and suffered a broken leg and a knee injury.,1
"A driver was checking the oil in a dump truck while standing on the bumper, approximately two feet high. The employee's feet slipped off the truck's bumper and the employee fell backwards hitting his head against the ground. The employee suffered a concussion and neck pain.",1
"On 10/22/2015 at approximately 12:30 pm, a carpenter was using a Skil saw to cut some lumber and lacerated his left thumb. He was admitted to the hospital.",1
An employee cut his hand with a high pressure water jet.,1
An employee was bending over to inspect a modular home and suffered a lower back sprain.,1
"On 10/22/2015 at approximately 10:10 pm, a forklift operator stopped his forklift and placed it in park. The employee took a drink of water that caused him to cough and presumably choke. The coughing, caused the employee to lose consciousness and fall from the forklift suffering eight broken ribs and a lacerated spleen.",1
"An employee was clearing a jam and jogging the equipment due to a ""barrel trip gate fault.""  The operator noticed a large jam and entered a gloved finger into the point of operation to clear the jam while jogging the machine.  The left index finger was caught in the dial (part of the machine that brings the plunger up into the barrel for assembly of the syringe) and the fingertip was amputated.  There are interlock doors on the machine normally guarding this point of operation, but the interlocks did not prevent the machine from functioning in the jog mode with the doors open.  The jog function is controlled by a two-button control that is operated from the handheld pendent hardwired to the machine.  Both job buttons can be operated with the same hand.",0
"On October 22, 2015, an employees was using a blow torch on a car and cut through the air conditioning line, causing an explosion and burns to the face.",1
An employee was trouble shooting a clam shell machine and got their right hand caught in the chain and sprocket drive resulting in the amputation of the right pinky fingertip.,0
An employee was reaching over a conveyor to retrieve a towel and her left hand became caught in the conveyor resulting in multiple broken bones in the hand.,1
"An employee was operating a planer when a piece of wood got stuck in the output roller. The employee attempted to remove the stuck piece of wood and caught her arm in the roller. She suffered a broken and displaced thumb, a crushed forearm and lacerations to the arm.",1
An employee was using a circular saw to cut wood stakes. The saw kicked back and amputated a left hand fingertip.,0
"On 10/22/2015, at approximately 3:45 pm, while on BORTAC Training, an agent fell approximately twenty-five feet from a helicopter. He was taken to the hospital and admitted. The extent of his injuries is unknown at this time.",1
A stack of sheetrock fell onto a worker's leg breaking it.,1
"On October 22, 2015, an employee tripped and fell over the plug and cord to a Xenex robot after plugging it in. The employee fractured a hip and elbow.",1
An employee was descending an extension ladder and fell five feet with the ladder. The employee went to the hospital for a possible concussion and leg injury.,1
An employee was clearing a spray gun when the 1100 psi pressure injected a component of urethane foam into his finger causing a buildup of material under the skin in the palm of his left hand.,1
An employee's right index finger was partially amputated above the first joint when it was caught in the case machine while unjamming it.,0
"An employee was operating a dye punch machine and amputated the second, third and fourth fingers on the left hand.",0
An employee was cutting pallets with a chop saw. The employee was clearing a piece of wood and amputated two fingers when his gloved hand was pulled into the running blade.,0
An employee was moving an ice cream freezer. The freezer slipped and fell onto the employee's hands amputating a middle fingertip.,0
An employee was using a hoist to lift a steel lid for a concrete septic tank. The hook slipped out of the chain hoist and struck the employee in the eye resulting in the loss of the eye and a fractured eye socket.,1
"On October 23, 2015, at approximately 1:00pm, a an employee was hospitalized after suffering a compression fracture to his back and laceration to his head.  The employee was driving an extendible boom manlift across a designated railroad crossing.  The machine malfunctioned and stopped with the bucket portion of the lift above the railroad tracks.  As a train arrived, the employee untied his harness and jumped from the bucket approximately 10' out and 6' down landing on a gravel surface.",1
"An employee was inspecting a crawler crane on site, lost his balance and grabbed the moving cable to steady himself causing his left hand to come in contact with the pulley shiv and amputating two fingers.",1
"A marine machinist was assisting qualified riggers in installing an approximately 400 to 500 pound pump when his left middle finger got caught between the pump and pump plate, subsequently amputating the tip of the middle finger without bone loss.",0
An employee amputated the end of his left index finger while dumping materials from the grey dumpster.,1
"An employee was untangling the cable from the block of the crawler crane.  Afterwards, the crane operator raised the block of the crane while the employee's hand was still on the cable.  The employee's left ring and middle fingers were amputated.",1
"An employee was lowering a mail truck door when their gloved finger was caught in the fold of the door, resulting in a partial amputation of their right middle ring finger just below the finger nail.",0
"A maintenance technician was repairing a Freon leak in the flora cooler.  The technician placed a fan at the cooler to disperse the Freon, but he was exposed to phosgene gas.  The technician became disoriented and almost passed out.",1
The employee was resting his hand on a piece of equipment while preparing to calibrate it. He turned to his right and his left pinky and glove were caught in the belt mount of the equipment. He was transported to the hospital and suffered a partial fingertip amputation with no bone loss. The bone was fractured at the tip.,0
Two forklifts collided and one employee suffered a hip injury.,1
Employee was hospitalized with a broken vertebrae and a damaged colon after being pinned between a loader bucket and a forklift.,1
An employee was bending over to open a box with a knife and his back popped resulting in a herniated disc.,1
An employee got a finger caught in the shredder machine while unjamming it.,1
An employee was untangling a cable from a pulley and caught his fingers between the cable and pulley resulting in the amputation of two fingertips.,0
An employee was calibrating the corrugator machine when the air cylinder struck his left hand ring finger. The employee was hospitalized for a lacerated and broken finger including the loss of a fingernail.,1
An employee was walking under a production line when her finger touched the sprocket and chain amputating the left middle fingertip.,1
"An employee was walking to his car, tripped on a retaining wall, and fell breaking his left arm. It was dark at the time of the incident.",1
"While adjusting the shear on the Schlatter machine, an employee's first two fingers on his left hand were amputated.",0
An employee was operating and monitoring an industrial spice packaging machine. The machine jammed and the employee suffered the amputation of the left ring and middle fingers while attempting to unjam the machine.,1
An employee was operating a lift truck with a foot hanging off the lift truck. He was struck by another lift truck and suffered a serious foot injury resulting in hospitalization.,1
An employee was cutting wood with a circular saw and amputated two fingers on the left hand.,0
On 10/23/205 a temporary employee was trimming aluminum material using an electric router. The router kicked back and amputated 1/4 inch of  the employee's left index finger.,1
An employee was loading molding into a machine. The employee's gloved hand was caught in the machine as the blade was coming to a stop. The right middle fingertip was amputated with bone loss.,0
An employee was standing behind a pallet. A fork truck came to move the pallet and caught the employee's foot fracturing it.,1
"While working at a private residence, a nurse fell backwards off a porch onto the concrete below.  The employee broke her left tibia and dislocated her knee.",1
An employee was administering medication to a cat when the cat bit the employee's fingers on her right hand. The pointer finger was fractured. The employee was later admitted to the hospital.,1
The employee was breaking down a pallet of goods for distribution onto the sales floor. The employee tripped and fell onto the corner of a plastic tote she was holding. The employee broke ribs and possibly punctured a lung.,1
An employee was inspecting a disassembled actuated ball valve on a workbench. The employee placed a finger on the valve when it cycled and amputated the left middle fingertip.,0
"On October 24, 2015, an employee fell from a pitch roof of a residential house resulting in a head injury.",1
An employee was delivering supplies and got their right hand caught in a door jam. The right middle finger was pinched and some skin was removed.,0
"An employee was melting butter in 4 to 5 quart pot on a gas stove when the pot caught on fire. A co-worker used a fire extinguisher to put out the fire. The injured employee took the pot with hot butter and while walking towards the door leading to a hallway and outside the building, she fell on the kitchen floor. The hot butter burned her right arm and thigh. She was admitted to the hospital.",1
An employee was exiting a transportation van and missed the bottom step causing the employee to fall about three feet to the concrete side walk.  The employee's hip was shattered.,1
An employee was disposing of lab quantities of chemicals and came in contact with 50% phosphoric acid. The employee suffered chemical burns to the right hand.,1
An employee lost part of the right index finger while operating a brake press.,0
"A millwright tripped over the edge of 1/16"" sheet metal and fell breaking a hip.  The employee was admitted to the hospital for surgery.",1
"Due to heavy rains, the wood chips lying on the #1 Reclaim Circulating Chip Conveyor became saturated and heavy to the extent that the weight yanked the gear box from the structural base.  In order to make repairs, a maintenance employee was manually moving the gearbox chain tooth by tooth.  When he released the chain on the third tooth/notch, he had his ring finger between the chain and the sprocket when the chain jumped causing his finger to be pinched.  As the pinch was occurring, the employee pulled his finger back, which caused the skin to be removed at the tip of his finger.  The incident resulted in the amputation of the fingertip.",0
An employee was installing a metal flange on a 20-inch pipe and pinched a finger between the pipe and the metal flange while retrieving a nut that dropped between the pipe and flange. The right index fingertip was amputated.,0
An employee was working on a module feeder and his hand contacted the belt resulting in the amputation of three fingers.,0
An employee was cleaning chromate applicator rollers with a no touch hand tool.  The tool was caught in the rollers and the employee's right thumb and forefinger were pulled into the rollers.  The employee was hospitalized and scheduled for surgery.,1
An employee was hospitalized due to an upper leg fracture.,1
"On or about 9:45 a.m. on October 25, 2015, an employee delivering food from the company's commissary to a restaurant was accessing the back of the delivery truck when he lost his footing and grip on the back of the truck. The employee fell backwards and hit his head.  He was admitted to the hospital.",1
An employee fractured an arm in two places while working on a product line and was hospitalized.,1
"An employee fell five feet from either a ladder or the HVAC unit to the concrete floor below while performing plenum work. The employee suffered a fractured  collarbone, two fractures to the lower spine, and head lacerations.",1
An employee on a fishing boat got his foot entangled in the rope as the boat was pulling away from the dock. The employee's foot was amputated.,1
"On or about 7:30 a.m. on October 26, 2015, an employee was preparing to change a powered industrial truck battery.  Due to the end stops on the multi-level battery rack being bent out of place, the battery was positioned too far into the rack for the large suction cup on the automatic battery machine to reach it and pull the battery out.  The employee used a strap to try to pull the battery forward and in doing so, his left pinky finger was pinched between the strap and a guardrail in the area, causing a fingertip amputation.",0
An employee tried to remove stones and dirt from the crusher machine. The rotor had not stopped turning. His glove got caught in the machine resulting in the amputation of the index finger.,0
An employee fell from the trailer of a transport truck while unloading material striking his head and shoulder resulting in a broken clavicle and concussion.,1
An employee was attempting to repair a golf cart engine when the engine restarted suddenly resulting in a right hand fingertip amputation.,1
"An employee was part of the utility crew removing a utility pole. He was struck by the pole and sustained injuries to his back, left shoulder and spleen.",1
An employee was operating a Solbern conveyor. The products being transported on the conveyor became jammed at the end of the conveyor.  The operator attempted to clear the jam by reaching underneath the conveyor and removing the product that was stuck between the conveyor and a tray. The operator's right ring finger was caught in a belt underneath the conveyor and the skin was peeled from the tip of the finger. The finger was amputated just below the finger nail at the hospital.,0
"An employee was seriously injured and hospitalized when a large die fell from a crane and struck the employee after the lift cable broke. The employee was hospitalized with a C5 fracture, compression trauma to T4, and a bulging L5 disc. The left great toe was also fractured.",1
"An employee working in the maintenance garage was conducting an oil change on a vehicle and was looking for a drum to collect the oil.  The employee and another employee found a partially full drum that was labeled as methanol.  The employees thought the drum potentially contained water.  They took the drum outside and poured some of the contents on the ground.  The employee that was conducting the oil change applied a lighter to the material on the ground.  The material caught on fire.  As the other employee was attempting to move the drum out of the area, some of the liquid exited the drum, and was ignited by the fire on the ground.  The employee that was conducting the oil change suffered second degree burns to his right leg from the knee to the ankle.",1
An employee was hospitalized with a broken jaw after getting into a physical fight with a coworker.,1
"A lineman was in the process of repairing and reattaching a downed power line to a wooden utility pole. As the lineman was climbing the pole, the pole fell striking the lineman and breaking a leg in multiple places.",1
"An employee was servicing the #128 Rotary Die Cutter.  The machine was de-energized and locked out.  The employee was using a timing wrench to adjust a bar and belt in the machine.  As the employee was twisting the wrench, his finger got pinched between the bar and another part of the machine.  The twisting action combined with the pinch point caused the employee to suffer an avulsion to the thumb on his left hand.",0
The winch rope on a brush chipper got caught on the employee's foot resulting in the amputation of the right foot.,0
"On or about October 26, 2015, an employee sustained serious injuries to the left hand while working on a piece of industrial machinery resulting in multi-digit amputations.",0
"While cutting meat with a meat band saw, an employee's right thumb came in contact with the saw blade.  The thumb tip was amputated. ",0
"An employee was putting tires on a motor grader.  After airing the tire up, the employee noticed that the O-ring was protruding from the seal, indicating a bad seal.  The seal ruptured and the employee was struck by rubber and flange from tire.",1
An employee was shocked when the trackhoe he was loading onto a trailer made contact with power lines.,1
An employee was working the front counter when a counter top refrigerator slipped off the counter and struck her left leg. She was hospitalized with a deep laceration and contusion to her left leg.,1
An employee was cleaning an extruder and amputated the left middle fingertip.,1
An employee tripped and fell down a stairway and tore a tendon.,1
An employee was working from the top of a tanker trailer when he fell eight-nine feet and broke his heel.,1
An employee received an electrical shock while working with equipment within the grinding room.,0
An employee was shredding paper at an onsite shredding truck. He climbed up the bin tunnel of the shredding truck and his foot was struck by the shredder ram resulting in crushing injuries.,1
An employee was bending tubing on a Pines bender and amputated the tip of the index finger.,0
An employee was struck by a cable that broke from a choke while moving a utility pole resulting in the amputation of the right pinky finger.,1
"An employee was operating a stand up forklift travelling east bound, forks trailing, behind another stand up forklift. Forklift 2 began to turn left into a staging lane to deliver parts. The employee attempted to pass Forklift 2 on the right side. As he was passing, he saw an oncoming forklift (3) travelling west. He made a quick right-hand turn to avoid the westbound forklift (3) into aisle 45 and struck a protective barricade that attached to the concrete that protected the barrier. The employee's left foot was pinched between the barricade and the back of his stand up forklift resulting in severe soft tissue damage and multiple leg fractures. The left leg was amputated below the knee.",0
An employee was out delivering mail and became faint.  The employee fell and broke the right hip.,1
"On or about October 27, 2015, an employee was standing at his work station resting a foot on the bottom shelf of a rolling cart. The cart moved and the employee fell breaking the right hip.",1
The employee was operating a forklift and dumping sand.  He got off the forklift to activate the dump hopper lever.  The employee's hand got caught between the fork and the hopper fork pocket amputating the left hand index fingertip.,0
An employee received second degree burns to the lower body when he slipped and fell while carrying molten metal in a ladle.,1
"An employee was performing knockout operations and got a gloved hand caught in a retractable drill. As a result, multiple fingers on the right hand were amputated.",1
The injured employee was changing a steam line diaphragm. A second employee turned on the steam and the injured employee experienced first and second degree burns to his back.,1
An empty steel box fell off the forks of a lift truck and struck an employee.,1
An employee fell nine feet from a wall of reinforcing steel rods as he was descending it breaking the right ankle. The employee was hospitalized for surgery to repair the fracture.,1
"An employee stripping forms off a 2,000 gallon septic tank crushed three fingers on his right hand between the stripping bar and the concrete tank.",1
An employee's leg got caught in excess rope while lowering equipment resulting in a leg injury. The employee was hospitalized.,1
An employee was putting glue into a AAA glue machine. The machine was running at the time. The cap fell off and fell into the machine. The employee reached into the machine to retrieve the cap and amputated his right hand middle finger.,0
An employee was walking into the warehouse and their watch got caught on a nail by the bay door. The employee's hand was lacerated.,1
"On or about 8:15 a.m. on October 27, 2015, an employee was operating a com cutter machine when he incurred an amputation to the tip of his left ring finger.  The machine rotates, smooths and cuts commutators that are a component of DC motors.",0
An employee slipped and fell on the wet and oily parking lot of a customer location fracturing a hip. The employee was hospitalized for surgery.,1
An employee loosened a four inch compressor line that was still charged. The line blew out and knocked employee backwards. The employee was hospitalized with a head laceration requiring stitches and a possible concussion.,1
An employee fell eight feet from or through a floor that was being structurally removed resulting in back and rib injuries.,1
Four employees were preparing to change a head saw blade.  One employee shut the head saw down and while the blade was still rotating another employee opened a door on the backside of the head saw.  That employee reached inside the door with his right hand and his arm was struck by the saw blade amputating the lower arm.,0
An employee was working from a ladder tying off a ship in port. The employee fell off the ladder and broke the right ankle and left heel.,1
An employee was attempting to break loose a pipe connection with a pipe wrench when his thumb was caught between the pipe and the wrench when the pipe string was lifted. He suffered a soft tissue amputation to the tip of the thumb.,0
An employee was removing building jacks from a bolted water tank. He was lowering sections of jacks and as he pulled the pin on the jack his left hand became pinned between two jacks resulting in the amputation of the left hand index and middle fingers.,0
The injured employee was working inside a sleeper detached from the truck. He was repairing the interior of the sleeper when a forklift driver lifted the sleeper approximately three feet off the ground. The injured employee stepped out of the sleeper and fell on his arm and shoulder breaking  his upper left arm.,1
An employee was on an extension ladder approximately 20 feet high changing a light bulb. The employee fell from the ladder onto the cement floor and suffered a broken shoulder and possible brain injuries.,1
"An employee was descending a 10 foot tall module under construction and fell resulting in a fractured pelvis, ribs and lumbar vertebrae.",1
An employee was manually feeding wire through a guillotine/cutter machine and amputated the tip of the left index finger.,0
An employee was hospitalized due to a severe cut while working on a TigerCat 234 Loader. The compensator was forcibly ejected from the valve body by hydraulic fluid pressure cutting the webbing between his left hand index and middle finger and forcing hydraulic fluid into the cut.,1
Employees were moving a lubricator onto a flatbed truck. An employee's finger was caught between the collar on the lubricator and the bed of the truck resulting in a right middle fingertip amputation.,0
An employee was feeding wire into a stripping machine that removes plastic from the wire when his fingers were pulled into the machine.  His fingers were crushed and severely cut. His left index finger was amputated between the first knuckle and the fingertip.,0
A maintenance employee was troubleshooting an air handler when his left hand got caught in the belt and pulley. He was wearing a glove but received a partial amputation to his middle finger and lacerations to his thumb. The equipment was de-energized at the time of the accident.,0
"An employee was moving a piece of sheet steel (estimated weight of 40-50 lbs.) into place to be  secured to a metal frame, when it started to slide. The employee's hand was struck by the sheet steel resulting in the amputation of the right pinky fingertip.",1
"Employees were installing two dust collectors. The employees were working on dust collector 1. An employee checked on the other dust collector that was not locked out to look at the dust that was coming out and got his hand caught in a rotary valve resulting in the amputation of the left index, middle and ring fingers.",0
An employee was breaking off castings on a pneumatic press and crushed his right hand.,1
"An employee fell approximately 40 feet while working from a suspended scaffold installing tubes inside the Comanche Power Plant Unit #3, suffering broken ribs and a broken left leg.",1
An employee was walking through the yard to the employee parking lot and was struck by a yard horse resulting in a fractured wrist and ribs.,1
"An employee had his right hand index, middle, and ring fingers amputated when his glove got caught in the horizontal lathe he was using to polish a 7/8 inch pin with an emery cloth.",0
An employee was installing railroad track when a rail rolled off the jack and pinched a finger resulting in a fingertip amputation.,0
"An employee was changing the bearings in a ventilation system motor. After the motor was put back together, the employee reached behind the motor with his left hand to check the belt tension. While the employee was checking the belt tension, the wind blew through the air duct and caused the ventilation fan pulley to turn. The employee's left pinky and index fingers were pinched between the pulley and belt and amputated.",0
"An employee was loading carts into a distribution truck. While organizing the carts inside the truck, two carts smashed together pinching the employee's right hand resulting in a middle fingertip amputation.",0
An employee was adjusting the chain drive on a energized conveyor. The employee's right hand was caught in the chain resulting in the amputation of the middle finger to the first joint.,1
The injured employee was coming back from checking the mail when she slipped and fell breaking a hip.,1
An employee was running within the establishment when she tripped and fell to the ground fracturing a hip.,1
An employee amputated the tip of the left middle finger when he tried to catch the pipe he was carrying and pinching his finger between the pipe and the floor.,0
An employee was positioning steel hull components for welding using a come-a-long. The hook slipped off the beam it was attached to and struck the employee in the face resulting in facial fractures.,1
An employee was setting a die on press #745 and his right pinky finger got caught between the filler ring and the filler die vent groove. The pinched finger was surgically amputated.,1
An employee suffered the amputation of the left thumb when his glove got caught in the drill press he was operating.,1
"An employee fell 34"" from a storage rack and fractured the right hip.",1
"The employee was installing a pipe on a new vessel and caught the left hand between the pipe and vessel, crushing the pinky finger. The fingertip was medically amputated.",0
"An employee 

amputated the right index finger to the first knuckle when his right hand was caught in steel double doors in an attempt to keep them from closing.",0
The employee was inspecting the grain sampler on the #3 leg that was not working properly.  The employee disconnected the air supply on the sampler. He then turned the sampler to dislodge the material. The sampler moved and amputated his right middle finger.,1
An employee was cleaning a power tool with break-cleaner spray and then activated the tool. Cleaner on the employee's hand and forearm was ignited causing possible second and third degree burns.,1
An employee was unjamming a bagging machine and amputated the left index finger to the first digit.,1
The injured employee was moving 40 foot steel pipe for inventory. The pipes rolled and caught his right hand index finger between two pipes amputating the right index fingertip.,1
"On 10/28/15 at 1:40PM, an employee was walking down a hallway and slipped and fell fracturing her right kneecap. The employee was hospitalized for surgery.",1
An employee was attempting to rivet two pieces of metal by hand with a rivet squeezer. The employee was holding the metal with his right hand and was operating the rivet squeezer with lift hand. The employee's right middle finger was caught between the rivet squeezer and the metal resulting in a fingertip amputation.,0
"A housekeeping employee was cleaning up a Formalin spill. The Formalin was covered with a spill-X absorbent to soak up the chemical.  As the employee was scooping up the absorbent her head started hurting, she felt dizzy, and she passed out.",1
"An employee was making welding repairs to one of the pad eyes on a 30 inch Blow Out Preventer (BOP). The task required the employee to place the BOP on a table positioner.  While welding the 14,000 lbs. piece, it fell from the table crushing the employee's left foot.",1
"An employee was at a soy processing facility and fell from the ladder on the back of his truck or truck platform resulting in a broken left arm, a concussion, and neck/back injuries.",1
An employee fell approximately 20 feet from a communications tower while replacing a metal cross-member of the tower and suffered a concussion.,1
An employee was working on extracting an angle cylinder pin from an 850K bulldozer when a piece of metal separated from the pin and cut the employee's wrist.,1
An employee fell while carrying a box through the store breaking her shoulder.,1
A forklift driver was lifting  4' x 4' totes weighing approximately 120 lbs. when full. Two totes fell and struck the injured employee; one struck the employee's back and the other struck the employee's leg. The injured employee suffered a pneumothorax puncture to the left lung and the right heel bone was fractured.,1
An employee was in the warehouse area attaching extension bars to the forklift. The extension bars are for longer skids. The extension bar slid off his hand and his right hand got caught between the extension bar and the fork causing the partial amputation of his ring finger.,0
"On October 28, 2015, an employee picking eggplants in the field was injured when he slipped on an eggplant and a tractor wheel ran over his right leg causing soft tissue damage to the right leg.",1
"An employee was preparing electrical conduit and fittings for installation. The employee went to the lower level of the pumping station with the conduit and while handing the conduit to a coworker who was working from a ladder inside the lower pit, he fell into the floor opening, struck a light on the wall and pipes on the floor. The employee sustained seven broken ribs and injured the left knee.",1
"An employee was knocked backwards from a sudden burst of pressure from the sandblaster he was using, tripped over the air supply line, and fell to the concrete floor fracturing the right femur.",1
An employee was operating a hydraulic press and amputated the left index finger to the first knuckle.,0
An employee was troubleshooting electrical equipment and suffered an electrical shock resulting in hospitalization.,1
An employee was changing a breaker in live panel. The panel shorted out and an arc flash burned the employee's hands.,1
"While attempting to cut through a 2x8 piece of lumber with a Skil saw, an employee cut his left thigh.",1
"While digging a hole for a fence post installation, the employee struck a live 277V electrical line and was shocked.",1
An employee was fitting the engine cylinder into its fixture and got his right hand pinched between the 150 lb. cylinder and the fixture resulting in the amputation of the right thumb and ring fingertips.,0
Employees were setting stakes in the ground in order to make new rows for parking vehicles. An employee was struck in the head by a stake that was being hammered into the ground by another employee and was hospitalized with a head injury.,1
"While standing and waiting to offload a trailer, an employee was struck by boxes that fell from a forklift platform.  The employee's right leg and left shoulder were broken. The employee also sustained a head injury.",1
An employee was using an Oxy/Acetylene torch to cut steel to fix a machine in the fabrication shop. The acetylene line burst and caught the employee's jacket on fire. The employee was hospitalized with second degree burns to his right forearm.,1
An employee lost his footing while climbing down a ladder and fell approximately eight feet to the concrete ground fracturing the left leg.,1
An employee was struck by a personnel transport vehicle in the cast member corridor and suffered a fractured ankle and leg.,1
"On or about 1:00 a.m. on October 28, 2015, an temporary employee suffered burns due to a fire on one of the machines and was subsequently hospitalized.",1
"Three employees were on top of the asphalt grinder trying to troubleshoot why it wouldn't run.  A fourth employee, a lowboy driver, walked over to the grinder unseen by the employees on top of the grinder. The employees started up the grinder. The lowboy driver's hand was caught in the moving belts on the back of the grinder.  The employee suffered the amputation of the tip of his left middle and ring fingers, and had a pin surgically inserted in his left little finger.  The employee was hospitalized.",1
"On October 29, 2015, an temporary employee's left foot small toe was amputated when a cart tipped over and fell on his left foot.",0
The employee was changing the track pads on a Caterpillar D6 and caught the left pinky finger between the track pad and the roller resulting in amputation of the left pinky finger at the first digit.,1
"An employee was inspecting a weld on the outside of a 32"" diameter, 80 ft. long pipe. The employee's foot and lower leg were caught between the pipe and a rotator roller.  The employee lost tissue on the right heel, calf and leg.",1
An employee's right hand was caught in the rotating blades of a lawn mower resulting in the amputation of two fingertips just below the finger nails.,0
An employee received a gun shot wound during a joint operation between the state of Texas and the FBI.,1
An employee was descending a fixed ladder on a de-ice truck and missed the last rung. The employee fell less than 2 feet and struck his head on the concrete ground. The employee has brain swelling and possible bleeding.,1
An employee was making repairs to the linear acceleration machine when he received an electrical discharge to his head.,1
"An employee was unloading 5 pound bags of flour from a rail car when the load shifted and fell onto the employee breaking the employee's nose, spine, ribs and ankle.",1
An employee was one of four employees working on the drag conveyor in the bin area and struck the back of his head resulting in a concussion.,1
"An employee was raking a bunker (sand trap) with a mechanical rake (unit is ridden by the operator). There are three individual bunkers at the #11 Green, which are above a retaining wall approximately 90 feet high. The employee was riding the rake on the slope towards the retaining wall and felt the machine slipping. He disembarked from the rake on to the cart path below the wall and fell fracturing ribs on his left side.",1
An employee was checking stock and taking inventory when she tripped over a poly strap and fell breaking a hip and injuring her femur. She was hospitalized for hip surgery.,1
"An employee was preparing chicken for frying when a flash fire occurred. The employee sustained second degree burns to the hands, right arm, and face.",1
An employee was attempting to drive a hover board (electric scooter) that a student brought into the office.  The employee stepped onto the board and it slipped out from under her causing her to fall backwards hitting her head on the floor and fracturing the back of the skull.,1
"On 10/28/15 at 11:45pm, employee 1 was assisting employee 2 move an extruder. The employees moved past the floor drain when the extruder shifted and employee 1's left hand got caught in between the extruder and an electrical panel box, crushing the hand. Employee 1 suffered fractures and compression injuries to the left hand.",1
A worker on the graphite processing cylinder was burned on his face and right arm when a spark ignited the hydrogen gas.  The worker was hospitalized.,1
Two employees were changing the belt on a 201 feed drag conveyor when the machine started to back up.  One employee incurred an amputation of four fingertips on the right hand when his hand went over the top of the pulley.  Then second employee incurred abrasions to the hand and a strain injury when his hand went underneath the pulley.,1
An employee lost control while operating a stand up fork truck in reverse and struck a material rack crushing the employee's left hand resulting in the left thumb amputation.,1
An employee was mixing chemicals. The chemicals reacted and splashed onto his back.,1
"An employee was fueling a crane. While climbing off the crane, he lost his footing and fell about a foot and a half striking the crane's tracks with his right leg below the knee. He suffered a laceration injury to the right leg and was hospitalized.",1
"An employee was removing excess grease lube from a boom drum on the derrick with a putty knife and got his right hand fingers caught in the rotating metal gears. His right index finger was amputated and the right middle, ring and pinky fingers were crushed.",1
An employee was connecting a digger/derrick hoisting hook to a material trailer. The digger/derrick started picking up the trailer and the hook slipped off. The hook struck the employee in the face causing blunt force trauma to the face including facial fractures and coma.,1
An employee slipped and fell inside a walk-in freezer. The employee was hospitalized for surgery to repair a fractured ankle.,1
A worker was operating a chop saw and amputated the tip of his right middle finger when his finger was pulled into the saw along with the wood to be cut.,0
An employee was removing formwork when a piece of lumber fell from above striking the right foot and fracturing toes.,1
"An employee, performing inventory, was descending a platform ladder and slipped and fell.  The employee was admitted to the hospital for a compression fracture of the L1 vertebra.  The incident occurred on 10/29/15 at approximately 7:55 pm.",1
"An employee was relocating a tool cart.  While backing it down a ramp, he caught his finger between the cart and a steel column causing an open fracture to his right middle finger.",1
Two employees were changing lighting on a flat roof. The first employee was descending the 30 foot extension ladder when he fell off the ladder to the ground and was hospitalized with a head injury.,1
An employee was cleaning the scraper belt and lacerated his left thumb when his glove was caught between the scraper belt and the freezer line.,1
An employee was removing a gate from a fence at a substation in preparation for large equipment transfer. The employee sustained an avulsion injury to the right middle finger when it was pinched by the latch on the gate.,0
Two employees were operating a press.  One of the employee's hands got caught in the machine resulting in the amputation of the left hand middle finger.,1
"The injured employee was working atop a hopper car, replacing running board bolts. He was wearing a harness and lanyard, but was not secured to the car. At the same time, a second Team Member (TM) was preparing to utilize the overhead crane. Before operating the crane, this second TM reviewed the permit that was attached to the crane control showing the injured employee to be working atop said hopper car. He went to the car the employee was reported to be working on, and did not see him. He then looked at other cars the crane would be passing over, and did not identify anyone working atop those cars either. At this point, the second TM began to move the crane west (away from the employee) and secured the welding machine to be moved. Once the machine was attached and lifted off the ground, the load was moved east (toward the employee). As the crane passed over the car on which the injured employee was working, he fell approximately 16 feet to the ground fracturing both ankles and a leg.",1
Employees were dismantling scaffolding at a jobsite.  One employee turned and slipped off the scaffold approximately 10 feet to the ground.  The employee suffered a broken pelvis and hip and a laceration to the arm.,1
An employee tripped and fell breaking a hip.,1
An employee took a left turn to retrieve a product and briefly lost control of his forklift and collided with a supporting column in the warehouse. His left wrist got caught between the column and the forklift resulting in a fracture to his left wrist.,1
"An employee was taking the temperature of a mold inside a foaming machine and dropped the temperature probe. As the employee tried to retrieve the probe, the left index finger was amputated.",0
An employee was loading freight when his finger was caught in between the freight and the carrier amputating his index finger.,0
"An employee was loading vehicles onto a car hauler and fell approximately 9-10 ft. sustaining broken ribs, a punctured lung and other serious injuries.",1
An employee fell approximately 9 feet from a roof injuring his lower back.,1
An employee was backing a forklift on the back dock with a transformer. The forklift overturned and the employee was hospitalized with an open fracture to the left leg.,1
"On October 30, 2015, an employee slipped and fell while using a degreaser to clean the floors at Philips Arena.  The employee was later admitted for chemical burns.",1
"An employee was feeding a double end trim saw. He dropped a board and bent over to retrieve the board. He reached up to pull himself up and grabbed the sprocket guard on the end. As he grabbed the bottom of the guard, a lug caught him and pulled his hand into the guard. He sustained a cut between the ring and middle finger on the left hand.",1
"On 10/30/2015, an employee fell approximately 17 feet during the installation of ridge cap on a pole barn that was being constructed. The employee suffered head injuries, a punctured lung and facial fractures. Fall protection was not worn at the time of the incident.",1
An employee was administered a flu shot as a condition of employment and sustained an allergic reaction resulting in anaphylactic shock.,1
An employee was using a cutting torch to cut hooks from the bucket of a front end loader. Slag inadvertently fell onto his left pants leg catching his pants leg on fire. The employee was burned on his shin and hospitalized.,1
"On October 30, 2015, an employee fell down the outside steps as she left work. She suffered a head laceration and was hospitalized for treatment.",1
"On October 30, 2015, at approximately 8:30am, an employee was hospitalized after being struck by a 14 inch diameter polyethylene pipe.  The employee was raising a hydraulic jack on the McElroy 618 machine when the pipe under pressure released from the cradle and struck the employee in the face and chest.  The employee's injuries were bruising of the chest, 12 to 13 facial fractures, loosened teeth, and a broken nose.  The employee was hospitalized.",1
"On October 30, 2015 at approximately 7:45 PM, an employee was feeding material into the conveyor belt assembly that carries the material to the shredder. The shredder jammed. The employee's leg got caught in the shredder as he pushed material into the shredder. The shredder tore part of his  left lower calf and bone.",1
"On 10/30/15 at approximately 1420, an employee was removing an equipment guard that was 6 inches off the ground.  He removed the top bolt while supporting the bottom of the guard with his right hand. When the top bolt came loose and dropped on his right hand it pinched the top of his ring finger resulting in a partial amputation.",0
" An employee fell at the job site on October 30, 201, and injured his left elbow requiring hospitalization.",1
An employee was operating a lathe and fractured his right index finger.,1
"On Friday, October 30, at approximately 11:20 pm, an employee was working on a lathe.  The employee had baskets of unfinished product to her right and baskets of finished product to her left.  A group of baskets containing finished product, weighing approximately 25 pounds each, fell on to the employee's right knee.  The employee was hospitalized.",1
"On October 29, 2015, at approximately 4:00pm, a maintenance technician suffered an amputation while troubleshooting an air cylinder on an evaporator foam fixture in the Tooling Department.  The maintenance tech placed his left hand on top of the cylinder hole while looking at the right side of the cylinder.  His arm inadvertently activated the lever in the down position and the tip of his left ring finger was pinched between the cylinder and the hole resulting in amputation.",0
"An employee was working on a truck that was on a jack stand. The truck came off the jack stand and struck the employee's torso, causing internal injuries and bleeding.",1
An employee sustained a right middle fingertip amputation when a plastic reusable pallet tote fell onto her finger when she was trying to move it. She was hospitalized for surgery to repair the injury.,1
An employee received a fingertip amputation to the 2nd digit of the left hand.,0
An employee's left hand was caught between a copper coil and the hook while loading copper tubing. The left middle finger was partially amputated.,1
"On or about October 31, 2015, an employee was delivering a parcel and was bitten by the homeowner's dog that resulted in hospitalization and 26 stitches to the jaw.",1
"The injured employee was helping a nearby forklift operator move a pallet of copper wire to a staging area. The employee was standing directly next to the load as it was being lifted. Once the operator attempted to move the forklift, the top unit of copper wire slid off the bottom unit, striking the employee in his left leg. The employee sustained two broken bones in the left leg requiring surgery.",1
"An employee was using an oxygen acetylene torch to cut a metal side plate/panel, that had been removed from a machine.  As the employee was cutting the metal, a part of the plate broke free from the cutting operation and fell onto the employee's left lower leg fracturing it. The employee was hospitalized for surgery on the lower left leg as a result of the incident.",1
An employee was walking into a resident's room when she tripped over a dog cage and fell fracturing a hip. The employee was hospitalized.,1
An employee was pumping chlorinated foaming cleaner out of a barrel and ingested the chemical.,1
An employee was clearing a jam on a machine and amputated the left index fingertip.,0
"An employee fell backwards off the third rung of a ladder and received a hairline fracture of the pelvic bone on October 31, 2015.",1
An employee was walking and tripped on an expansion joint in an occupied tunnel underneath the hospital and fractured the pelvis.,1
An employee was standing on top of the mast of a forklift when a hydraulic pump shot up and struck his ankle. He fell and broke his left ankle.,1
An employee was exiting a room and tripped over a broom handle. The employee screamed causing another employee to throw her keys. The keys struck the injured employee in the eye.,1
The employee was manually handling plastic pallets when the employee's left thumb tip was caught in between two pallets resulting in the amputation of the thumb tip.,0
An employee amputated the right middle fingertip while priming an icing pump on the blue colored icing line.,0
An employee was cleaning the glue roller and his glove got caught in the roller crushing  and removing tissue from his right pinky fingertip.,1
"An employee was walking away and was called by another employee. As she turned, she twisted her right leg causing her to fall and sprain or strain the right ankle.",1
An employee tripped over a concrete bumper and fell in the parking lot while walking to her vehicle at the end of day. Her left kneecap was fractured.,1
An employee was injured when she slipped and fell striking her back and the back of her head on the floor.  She was hospitalized.,1
"1. On 11/1/15, an employee was changing the reel of paper and caught the left middle finger in a nip point. The finger was amputated to the first knuckle.


2. On 11/11/15, an employee received chemical and thermal burns to the right hand and knee from caustic hydrogen peroxide due to an unclosed valve on the pulp mill equipment. 

Note to user: This record contains two separate events that were reported simultaneously to OSHA by the employer.  These events are captured as one report.",1
An employee working as a bagger tried to obtain a cotton sample from the side of the cotton bale and was caught by the belt pushing him into the bagger. The employee suffered a broken rib and a punctured lung.,1
An employee was threading a conveyor belt on an air lay machine and got the right hand caught in the pin cylinder. The hand was amputated.,0
A temporary employee suffered a torn tendon in his left knee when he slipped and fell striking a metal wall under the production line.,1
"An employee was on top of a weaving machine to view a counter. The employee slipped and fell. As the employee fell, the employee's right hand contacted an unguarded chain and sprocket.  The employee's right pinky finger was severely lacerated and amputated at the hospital.",0
An employee fell approximately 10 feet while descending a ladder resulting in a broken ankle.,1
An employee was cleaning around a lint cleaner saw. The employee's sleeve got caught in the saw resulting in the amputation of the left middle finger.,0
An employee was cutting wood with a table saw and amputated the right index finger at the middle knuckle.,0
"An employee was attempting to weld a piece of sheet metal to another assembly. The tack weld broke and the sheet metal fell onto the employee possibly fracturing the right knee, left ankle and heel.",1
An employee's hand was caught in the plant removal roller and wrenched.,1
"The injured employee was having a difficult time closing the latch of a shipping container door. This employee was standing beside the shipping container door by the handle while another employee, who was operating a forklift, pushed the latch of the container's door per the injured employee's command. The fork struck the injured employee's right hand middle finger resulting in a fingertip amputation.",0
The employee was moving his office chair and woke up on the floor. The employee was taken to the hospital and diagnosed with a concussion.,1
An employee amputated half of his nail and finger when an automatic valve closed on his right middle finger.,0
An employee was moving tires and felt pain. He was hospitalized for hernia surgery.,1
An employee was lifting a stretcher with a person on it and injured her back.,1
An employee was shaking out steel member when the steel member struck the employee's lower leg causing a fracture.,1
An employee was handling boxes of potatoes when he experienced pain. He was transferred to the hospital where he was scheduled for a possible hernia operation.,1
An employee was burned on the hands and feet while breaking slag loose from the side of Furnace-A with a slag rod.,1
An employee was operating a horizontal slider machine and was hospitalized when he backed up into the machine blade (3/4 inch wide) and lacerated both arms and his back.,1
An employee was running the overhead crane to unload coil from a flatbed truck when his finger was caught between the board and the coil as he lifted the crane.  He lost 50 percent of the distal tip of his right index finger.,1
An employee injured his right hip that required surgery when the golf cart he was driving flipped.,1
The employee was approaching  the doors that go into the lunchroom/cafeteria area. Somebody had just come through the doors. As the doors were closing he grabbed the edge of the door trying to catch it before it closed. The doors caught the end of his pinky finger and amputated it.,0
"An employee was working on a bakers scaffold about 4' high, patching the fireproofing on structural steel. The employee stepped off the scaffold and fell backwards. The employee possibly experienced head and back injury and was taken to the hospital.  At the hospital, the employee was treated and admitted for a finger infection. The employee used his hand to brace the fall and aggravated a previous injury.",1
A delivery driver was in the process of delivering beverages when he fell off of the lift gate.  He was found on the ground unconscious and bleeding from the head.,1
An employee sustained blunt force trauma injuries while testing an aerial fire apparatus for certification The employee was adding weight to the end of the ladder when an out rigger on the driver's side failed causing the ladder to fall and pin the employee.,1
"On or about November 2, 2015, a mechanic was removing a turbo from an engine while standing on a ladder. When dismounting the ladder he fell and his left pinky finger was caught between the turbo and a tank beside the truck and amputated.",0
"On or about November 2, 2015, while installing insulation at a customer's home, the employee's hand/finger got caught in the blower belt amputating the finger down to the first joint.",1
"A delivery driver fell off the back of the truck, landing on the pavement below, and broke the left hip.",1
An employee fell while entering the facility and fractured the right hip.,1
An employee was walking in the hospital hallway and looking elsewhere when she ran into a set of automatic doors. The employee felt backwards resulting in two arm fractures and hospitalization.,1
A motor vehicle mechanic was tightening the nut on a break drum. As the employee was pulling the wrench towards himself he lost balance and fell backwards breaking the right hip.,1
An employee was burned while working in a manhole on de-energized cables when a live cable that was not being worked on randomly failed and caused an arc blast.,1
An employee was delivering a parcel to a residence and slipped on a mat that extended over the top step and fell down the stairs. The employee fractured lumbar vertebrae without spinal cord injury.,1
An employee placing road cones into a pick up truck bed was thrown into the cab when another vehicle collided with the arrow panel that the pick up was towing. The employee fractured the left arm and a hip.,1
An employee suffered a fingertip amputation due to contact with an unguarded chain and sprocket located on the packaging conveyor.,0
"An employee was installing metal roofing for a new pole building. As he was coming down the roof for a break, he fell through a seam in the roof approximately 12 ft. to the ground below. The employee suffered a head injury, a broken left wrist, stitches above the left eye and right elbow and a bruised tailbone.",1
"An employee was walking in the cafeteria and tripped and fell injuring their head, neck and hip.",1
An employee fell on slick floors that were being mopped.,1
"An employee was working on a crawler crane.  The crane was boomed down and the employee was performing a repair on a sheave. While he was working on the sheave, the wire rope pulled his left index finger and crushed it resulting in a fingertip amputation.",1
"Two employees were bolting round flanges into a pipeline formation.  One employee was torqueing with a ratchet while the other was holding a multiplier that was attached to the ratchet with the use of an extender.  There was another 2"" flange (which extended further out than the flange that was being bolted) that was in the middle of the flange that they were bolting.  They were torqueing the bolts on the flange in sequence/series.  When they started the last round of torqueing, the employee holding the multiplier got his pinky caught between the multiplier and the center flange.  This resulted in a partial amputation of the left pinky finger.  The employee had removed skin form the very tip of the finger and the nail bed.",0
The employee was washing a stripper filler machine with a 4 to 5 inch diameter flexible hose that hung down from the ceiling. The employee noted a sharp pain in the back during the cleaning operation and heard a pop when the employee bent over to pick up the tool.,1
An employee was operating a mechanical punch press and amputated the left index finger.,0
"Employees were stripping concrete forms from a bridge when a 4 x 8 piece of plywood fell hitting another employee on the ground causing broken ribs, a back injury, and a punctured lung.",1
An employee was rigging up a swab lubricator when he tripped on an uneven surface and broke his tibia and dislocated the fibula.,1
An employee was driving a stand-up forklift and hit the wall. His left foot was caught between the wall and the forklift. He was admitted to the hospital.,1
"A flagger at the project was struck by car on November 3, 2015. The employee sustained two broken arms, a broken wrist and a broken leg.",1
An employee came in contact with energized wiring that was carrying 480 volts.  The employee was hospitalized.,1
An employee fell off of a garbage dumpster while trying to fix material that was sticking out of the top.,1
An employee fell while cleaning a fan in the workplace suffering an L2 fracture to the back.,1
"Employees were preparing to set steel trusses approximately 66 feet long.  The trusses were being moved via forklift from a staging area in the south parking lot approximately 270 feet to the north.  The injured employee was trying to stabilize a steel truss attached to a forklift.  When the employee removed the strap, the truss, weighing approximately 4000 lbs., tilted and fell onto his leg.  The lower leg was amputated.",1
"The employee was conducting a pressure test of a Blow Out Preventer (BOP) when a high pressure water spray contacted the employee's right armpit causing a 1/4 to 1/2"" laceration.",1
"An employee removed a blow out preventer (BOP) from a well head. The BOP was suspended by the rig.  While suspended, the BOP started rotating catching the employee's left ring fingertip between the BOP and the stationary well head resulting in amputation.",0
"On or about November 3, 2015, at 9:00 am an employee miss-stepped and fell 10 feet to the warehouse floor.  He was hospitalized for 4-5 broken ribs and a deep gluteal hematoma.",1
An employee was performing maintenance on a product elevator and amputated the index fingertip in the conveyor belt.,0
An employee working in the layer/chicken house got his right hand caught in a pinch point while trying to clear manure from the belt resulting in a pinky and ring finger avulsion fracture.,1
"A painter was walking up the indoor stairs.  He fell from the second floor landing down to the first floor breaking his collar bone, five ribs and punctured a lung.  It is new construction so there is no railing on the stairs.",1
The worker's left ring finger was amputated when it was caught in the conveyor belt while unloading packages in the loading dock area.,0
An employee fell and fractured her hip while getting out of her chair.,1
On 11/03/2015 at 4:45 pm an employee was exiting the facility and fell in the parking lot breaking her right arm.,1
An employee was operating an overhead crane with the right hand and supporting the part being lifted with the left hand. The employee's left ring fingertip was pinched between the part and the crane while hoisting resulting in the amputation of the fingertip.,0
"An employee was attempting to clear a jam in the chopper and amputated the tips of the left index, middle, and ring fingers.",0
An employee working as a metal sorter on the discharge side of the Vezzani Sheer grabbed a hold of a steel cable and pulled it causing material to fall and strike his left hand. The employee sustained a laceration and broken left index finger.,1
"On or about 11/3/15, an employee suffered a knife wound to their left forearm resulting in surgery.",1
An employee fell approximately 14 ft. from a metal roof breaking his leg on impact.,1
An employee was in the process of cutting plastic roofing material with a hook knife.  The knife got caught up in the plastic roofing material.  The employee pulled on the knife and when it dislodged he cut his thigh.  The employee was admitted into the hospital.,1
An employee was operating a press machine and amputated the right middle finger.,0
"The employee was pulling a portable laptop bag with wheels through the front door of the facility. Either the bag or the employee's shoe caught on a rubber mat, causing the employee to trip and fall. The fall caused the employee to fracture her back.",1
An employee was operating an overhead crane remotely while riding in a pallet caddy on the crane. The worker fell 15 feet injuring his hip and leg.,1
A sanitation engineer was hooking the cable hooks to the residential dumpster when his right index finger was pinched in the safety hook latch.  This resulted in a crushing injury and the loss of the right index fingertip.,0
Employees were loading pipe into an inclined pipe rack that is used to move pipe into a machine. The pipe is set on the rack and rolls down to a pipe stop at the end of the rack that is supposed to slow the pipe down before it rolls into the machine. The pipe stop was in the down position when employees loaded the rack so the pipes rolled down too quickly. One employee tried to stop the pipe with his hand. His right pinky finger was caught between two pipes causing a partial amputation that required surgery and admittance to the hospital.,1
An employee was collecting field data walking up and down a stream bank. The employee fell and fractured their skull.,1
An employee was closing the door of a 767 Aircraft and caught the tip of the left index finger in the track.,1
A press operator was removing a print unit from a press and placing the unit onto a cart when their hand was caught between the cart frame and the print unit.  The left middle finger was amputated.,0
The employee was working in the receiving area moving a rolling rack of baked goods. The corner of the rack caught his right ankle and the employee's Achilles tendon was severed.,1
"An employee slipped and fell after stepping off of the drying rug of the ""Sani-Stride"" sanitizing system onto the concrete floor.  The employee twisted and fractured the left knee.",1
"The employee was sitting at the edge of a large commercial dumpster with his feet inside of the receptacle.  The employee was attempting to reach for a piece of plywood, lost his balance, and fell backward, approximately 8 feet to the dirt ground below. The employee was hospitalized with fractures to the neck.",1
An employee had his foot crushed while unloading a cargo plane and was hospitalized due to the injuries he sustained.,1
An employee drove a forklift through the loading dock door causing severe injury to the lower leg.,1
An employee was operating a mechanical power press and amputated four fingers on the right hand.,0
"On or about November 4, 2015, at 9:00 am an employee was fusing 24-inch diameter plastic pipe in a field when the excavator operator tried to adjust the alignment of the pipe and caused the torqued pipe to swing into the employee, knocking him to the ground.  The pipe then crushed and broke his lower right leg before it was lifted away.  The employee was hospitalized for pin placement and overnight observation.",1
"On November 4, 2015, at approximately 8:45 an employee smashed three fingers on his right hand which resulted in hospitalization to surgically repair a broken right pinkie finger. The employee smashed the fingers when his right hand became caught between the rod elevator and tubing in the wellbore.",1
An employee's leg was injured after side swiping a barrier guard while riding in a golf cart.,1
A worker was hospitalized for smoke inhalation while winding copper coils.,1
An employee stepped off the back of a truck and was struck by an oncoming vehicle. The employee suffered fractured ribs and bruised lungs and a fractured leg.,1
"On 11/04/2015 at 9:00 pm, an employee was putting up a Star Wars display with a scissor lift when he touched a metal beam that sparked and burned both of his hands. The employee was hospitalized.",1
The employee was weighing patients on a hydraulic light scale when he tore his right rotator cuff.  He was hospitalized on 11/04/2015.,1
An employee received arc flash burns on the right arm and hand while working in an existing electrical substation.,1
An employee was using a hoist to move a steel beam. The employee pushed the wrong bottom and the beam fell over onto the employee. The employee suffered a displaced fracture on his right toe and had to have surgery to insert a pin and plate.,1
An employee engaged in constructing a cashier booth suffered an amputation injury when the raised booth fell on his fingers. One employee raised the booth with a pry bar. The injured employee had his hands under the booth while attempting to install a sill plate. The pry bar broke and the booth fell on the injured employee's fingers.,1
An employee was exposed to floor cleaner and developed shortness of breath.,1
An employee was using a laminator and got a hand caught in the machine suffering third degree burns to both hands.,1
An employee working with a grout pump got his hand caught in the pump resulting in the amputation of his right hand.,1
"Employees were demolishing concrete when a piece of concrete fell out of the skid steer and landed in such a way that it cantilevered a 2x6 up and struck an employee, breaking the jaw.",1
"An employee was hospitalized after they slipped and fell approximately 15-20 feet through a scrap cavity located beneath the AP-8 mechanical power press while pushing scrap into the cavity. The employee suffered a fractured ankle, broken nose, lacerations to the face, and is scheduled to have surgery on a fractured elbow.",1
"A temporary employee was running normal production operations on a stamping press. The employee hand-fed extruded aluminum pieces into the point-of-operation with actuation controlled by two-hand controls located at shoulder height. The employee cycled the press, and once the cycle completed he removed the punched part. Subsequently, he put new blank into the point-of-operation and at that time, without manual actuation, the ram drifted from its top-stop and came down while both of his hands were in the point-of-operation. Both hands were crushed by the ram.",0
An employee broke two bones in his left leg when he slipped in the pea gravel and his leg slid under a cradle that was being used to support and hold in place a steel pipe.,1
"On or about 1:15 p.m. on November 4, 2015, an employee cutting meat on a vertical band saw sustained a partial finger amputation to his left index finger.  The employee wore layered cotton, metal mesh and rubber gloves on his right hand, which he used to turn the meat during cutting/trimming.  He wore layered cotton and rubber gloves on his left hand which he used to take the trimmed pieces of meat and set aside for freezing or packaging.  His left hand inadvertently contacted the moving blade while placing a trimmed piece of meat to the side.",0
"An employee was pulling the jet rooter line from a storm sewage line when the jet rooter line became stuck on a piece of tile. As the employee continued to pull, the line came loose and the brass tip on the jet rooter snapped back striking the employee in the face. The employee suffered fractures to the orbital and maxillary bones.",1
"A die setter was using an overhead crane to lift a die (approx. 2000-4000 lb.) so that he could put wood blocks underneath it .  When the employee lifted the die, the load block was not centered under the die and caused the die to swing hitting the employee in the chest.  The employee suffered a fractured sternum, 2 broken ribs, and a punctured lung.",1
An employee was injured while unloading a grain truck delivering corn to the facility. The employee slipped on loose grain and fell backwards. His left foot made contact with an unguarded belt conveyor resulting in a broken ankle that required surgery to repair.,1
"An employee was walking in the aisle and was struck by a forklift transporting a tool die injuring the right forearm, hand and leg.",1
An employee was turning a shaft on a lathe and polishing it with an emery cloth. The employee's glove got caught in the lathe pulling the employee's left hand into the machine and amputating the left middle fingertip and crushing the index and ring fingertips.,0
An employee was injured after jumping off a motorboat and falling into a sluice. The employee had fractures to his ribs and vertebrae.,1
An employee was putting a new blade in a vent gun.  Her hand slipped and the blade cut the tip of her finger.,0
An employee fell off the tailgate of a customer's pick up truck and injured his head.,1
"An employee was cleaning out a jam on the lint cleaner machine. The machine was turned off, but the blades were still turning when the employee's hand got caught in the machine amputating the tip of the ring finger.",1
"The employee jump started a tandem axle truck. After getting it started, he went back to put the battery covers on the batteries and the truck rolled forward. The first set of tandem rear wheels ran over the employee fracturing ribs and the right foot. The employee was hospitalized for surgery to repair the injuries.",1
"An employee walking through yard stepped in wet concrete, thinking it was dry, which caused him to slip and fall, injuring his back.",1
An employee was lowering a battery from the shelf to a pallet approximately 2 1/2 to 3 ft. down.  The employee was holding the battery by the handle. The handle broke and the battery fell on the employee's foot crushing his toe. Part of the toe was amputated.,1
An employee was framing wooden walls.  A gust of wind blew a wall over and knocked the employee to the ground. The employee sustained a shoulder injury and a cut above his eye.,1
"An employee was preparing to clean the cheese cutter. As he was moving the machine, his right index finger got caught between the push plate and the post amputating the tip of the right index finger.",1
"An employee working on a construction site received second degree burns on his face and neck. The employer is investigating, but the employee was performing electric work at the time of the accident.",1
"On November 5, 2015, an employee operating a drill press crushed the tip of his right index finger when his glove was caught in the drill. The finger was eventually amputated.",0
"An employee was delivering food product to a restaurant location.  The employee was going down the truck ramp, misstepped near the bottom and fell dislocating his right ankle and breaking his lower right leg. The employee was admitted to the hospital for surgery.",1
"An employee was operating the forklift and suddenly lost control. During impact, the operator was struck in the ankle by a piece of wooden pallet. The employee was bleeding profusely.",1
An employee was retrieving merchandise from a layaway storage area and felt groin pain. He was hospitalized for hernia surgery.,1
An employee amputated the tip of the right index finger while cleaning a pump and the pump activated.,0
An employee was pushing a four wheeled dolly and pinched his finger between the dolly and a door frame resulting in a left hand ring finger amputation.,1
"On November 5, 2015, an employee was attempting to remove the lift hydraulic cylinder from the mast of a forklift. The employee had blocked the mast to prepare to remove the cylinder. The employee used a pry bar because the cylinder was stuck in its mounting points. While using the pry bar, both the blocking for the mast and the cylinder came out, causing the mast to crash down and smash the employee's left index finger between the mast and the frame. The finger was amputated, requiring hospitalization and stitches.",0
An employee had his right thumb amputated above the first knuckle while using an alligator shear to cut aluminum pieces.,1
An employee was using an assembling machine and crushed his left thumb resulting in an amputation.,0
"The employee was cutting the top of the roof of a floating roof tank with a reciprocal saw when he lost his balance and fell backwards. The saw landed on his left thigh, while it was still running.  The incident resulted in a broken left femur.",1
An employee delivering furniture suffered nerve damage to the right hand when it was caught between a sofa and the tailgate of the delivery truck.,1
"An employee was getting ready to leave for the day after fixing the rear axle of a vehicle outside when his legs started to spasm. He began sweating profusely and got dizzy. Paramedics gave him IV fluids and the employee felt better, however, he was hospitalized overnight for observation of dehydration.",1
An employee injured his finger with a battery power drill while dismantling scaffolding.  The employee's glove got caught in the drill and twisted. The injury required a partial amputation of the tip of his right ring finger.,0
"An employee was cutting a piece of polycarbonate board with a miter saw. While operating the saw, the employee cut his left index finger. The fingertip was amputated at the hospital.",0
An employee was transferring an erect package on an erect package cart.  The employee's thumb was underneath the package and when he pulled it out from under the package he sustained an amputation injury.,0
"Employees were emptying a trash buggy into a dumpster. While picking up the buggy, an employee's right ring finger got caught between the edge of the dumpster and the buggy resulting in the loss of soft tissue requiring surgery and graft.",1
An employee was injured when he fell approximately 15 feet from a electrical pole where he was repairing a street light.  The employee fractured a hip.,1
"An employee was shot by a customer at an employee-sponsored pheasant hunt, suffering gunshot wounds to the stomach, heart, face, and arms.",1
An employee was loading material onto a truck when he tripped over a shrink-wrapped pallet. He injured his back.,1
An employee was spraying water with a hose onto the floor and auger. The employee removed the drain cap from the auger and attempted to remove a piece of meat. The employee's left middle finger got caught and amputated in the auger.,0
"An employee placed a ladder on communication strands and began to climb it.  The strand broke, causing him to fall and break three vertebrae in his back. He was hospitalized.",1
An employee was working on a crane that was out of service. He went and got a ladder and put the ladder on the spreader bar of the crane. He climbed about 8 to 10 feet up the ladder when it slipped out from under him. He fell and broke his right shoulder.,1
"On 11/06/2015 around 1 a.m., an employee flagging vehicles at a construction site was hit by a car.",1
"While using a metal rolling machine to straighten a piece of sheet metal, and employee's glove got caught in one of the rollers, which pulled his hand in. He lost three fingers on his left hand down to the first knuckle, requiring hospitalization and surgery.",1
"An employee was unloading the truck (grains) when he fell into a pit. His foot got caught on an auger screw conveyor, resulting in two cuts and two fractured toes on his left foot.",1
"An employee was cutting meat using a band saw. He lost his balance and his thumb went into the saw blade, amputating it.",0
An employee attempted to contain an active fire using a fire extinguisher when she suffered smoke inhalation. She was hospitalized.,1
"On 11/6/2015, an employee lifting coils on dies with a crane overexerted their back. The employee was hospitalized.",1
An employee was injured when he lost his balance and fell from a supporting scaffold onto a milk crate. He was hospitalized with lower back injuries.,1
"On or about November 6, 2015, an employee's left ring finger was amputated while pushing a turkey into a hock cutter.",0
"An employee was installing fiberglass insulation in a cellar when the metal hanger that holds the insulation under the floor hit and lacerated the employee's eye, requiring an operation.",1
"An employee attempted to clear two pieces of lumber that became jammed on a conveyor using a tool called a pick. The conveyor was not shut down at the time. He slipped, and his right foot became wedged between the conveyor's chain. He suffered lacerations and trauma to his right foot, requiring surgery.",1
An employee in the processing department was reaching for a piece of meat with their left hand while holding a knife in their right hand. The knife stabbed and severely lacerated the employee's left forearm.,1
An employee was mowing a townhouse property when the mower became clogged. He attempted to remove leaves from the shoot with his hands. The mower was still running at the time. He sustained a partial middle finger amputation.,1
An employee was hospitalized after being struck in the head by an unsecured wall partition. The employee sustained a contusion.,1
"An employee was clearing a jam in a machine used to extrude rubber when the employee's right middle finger came in contact with the ""wipe"" and was partially amputated.",1
An employee was slicing cucumbers when he dropped a cucumber into the slicer. He attempted to grab the cucumber with his left hand when the slicer blade lacerated his left index finger.,1
An employee's left forearm got caught in a chain drive near the laminator.,1
"An employee was cleaning the floor, picking up pieces of tomato, when he slipped and fell on a tomato slice. He broke his left femur.",1
"An employee operating a stand-up forklift removed a pallet from a storage rack. His left foot was hanging over the rear of the forklift as he backed away from the rack. While reversing, he struck the storage rack behind him, injuring the toes on his left foot. He was wearing steel-toed shoes at the time. His second toe was amputated.",1
"An employee was installing a chain on an accumulator when his left-hand little finger got caught between the chain and the sprocket, amputating the fingertip.",0
"An employee was working on a metal object. The metal object shifted and fell, lacerating the employee's left finger and breaking his leg. He was hospitalized.",1
"An employee went to make an adjustment on an elevator machine inside the motor room. The machine turned on and caught his right hand, severely lacerating his index finger and crushing his hand and wrist.",1
"An employee became pinned between the handle of a double pallet jack and warehouse racking, sustaining internal injuries.",1
"An employee was vibrating air out of freshly poured concrete when the concrete boom collapsed and struck the employee, fracturing his left femur and tibia.",1
An employee was walking around the property when he slipped on lime rock and broke his left ankle in three places. He was hospitalized.,1
"While an employee was on a ladder and preparing to weld, the ladder began to shift. He held onto a beef rail, dropped down to the floor level, landed on his heels, and fractured them.",1
An employee was walking through the kitchen when he stepped into a pan of hot water that had not been poured into the drain. He received 3rd degree burns to his right leg down to his foot.,1
An employee was pulling products to fill an order when a passing forklift ran over and broke his foot.,1
"Two employees were moving a metal computer-server stand down a steep flight of stairs. The upper employee lost his grip and the item fell and hit the lower employee's foot, breaking bones.",1
"An employee was moving a 55-gallon drum of hydrofluoric acid onto a pallet on a forklift. The employee pushed the drum with his hands and knee. Approximately 1 hour later, he noticed his pant leg was wet and recognized the acid odor. He suffered 2nd degree burns to his knee cap and was hospitalized.",1
An employee was attempting to repair a machine and got his hand(s) caught in the machine. The right pinky finger was surgically amputated.,0
"On November 7, 2015, at approximately 11:00 a.m., an employee was injured after being thrown from his horse. He was attempting to capture a horse that got loose during training and was trying to prevent the loose horse from going through a gate. The loose horse ran into the employee's horse. He was thrown to the ground and possibly into a metal gate. He was hospitalized for fractured left ankle and fractured vertebrae.",1
"An employee slipped and fell while mopping the floor, sustaining a broken hip from the impact.",1
Employees were installing H beams when one employee felt a static shock through his leather gloves. He was hospitalized with atrial fibrillation.,1
"While getting up from a desk, an employee's foot got caught in extension cords. The employee fell and suffered a fractured knee.",1
An employee was restraining a resident when the resident bit the employee's right hand.,1
An employee was closing an office window shade when the employee slipped and fell from the 12-inch high window ledge. The employee's patellar tendon ruptured.,1
An employee injured her back while wheeling a stretcher. ,1
"On 11/09/2015, an employee suffered broken bones in his left wrist when it was caught in a press brake.",1
"A pipe rack slid off a forklift, catching and amputating an employee's right pinky fingertip.",0
"An employee was standing on a chair to unplug something and fell injuring their ankle, requiring surgery.",1
"An employee operating a forklift tried to steady something on the opposite side of the forklift with his arm. While doing so, he made contact with the controls, actuating the forklift mast in the downward direction. He broke multiple bones in his forearm and was hospitalized.",1
"An employee went to empty the trash at a gas pump. When the employee lifted the trash lid, a stray cat jumped out of the trash can and scratched and bit the employee, requiring hospitalization.",1
"An employee had changed a propane tank on a forklift. After several attempts to start the forklift, a fire was sparked, causing second degree burns to the employee's arms and hands.",1
"An employee was walking into the bathroom when she slipped and hit her head against the toilet or tub, requiring hospitalization. She may have lost consciousness after hitting the back of her head.",1
"An employee was moving product with a forklift. When he exited the vehicle, the forklift began to roll. He attempted to re-enter the lift and was struck by the front tire, suffering an open fracture to his left knee. The parking brake was not set at the time of the incident.",1
"On  11/9/15, an employee was pushing a cart while cleaning her work area in the store when she tripped, fell, and broke her right elbow.",1
"An employee was unloading trash into a dumpster from the back of a pickup truck. As he stepped down from the truck, his foot slipped on the bumper. He fell backwards, breaking three ribs and lacerating his head.",1
An employee was cutting the plastic bands off of a bundle of cardboard boxes when the knife cut her arm.,1
An employee was in the rear of a delivery truck and fell off. He suffered a 40% partially collapsed lung.,1
An employee was setting up for the next job on the recoiler when his right index finger got crushed in a pinch point on the machine. He suffered a fingertip amputation.,1
An employee was adjusting the projection welder machine. The employee's right hand was on the working surface of the machine when the steel shaft came down and amputated the employee's right middle finger.,0
"On or about 11/9/2015, at 3:30 p.m., an employee was lowering the scissor lift he was in when it got stuck. When the scissor lift became unstuck, it free-fell. On impact, the employee suffered heel and right ankle fractures.",1
"An employee was handling a windmill edge protector as it was being lifted by a crane. The edge protector fell on top of him as he stood underneath it, fracturing his neck and compressing his spine vertebrae.",1
"On or about 11/09/2015, at 9:49 a.m., an employee was spotting for a coworker driving a reach truck.  The driver backed up and rolled over the employee's right foot, fracturing it and requiring hospitalization.",1
"On 11/08/15, an employee attempted to clear wood debris from a knot saw when the blade amputated the first digit of his right-hand middle finger.",0
An employee was adjusting a band saw to cut metal pipe. The pipe lacerated and fractured the employee's right thumb.,1
"On 11/9/15, an employee was sliding a dolly across a dock when he fell approximately 3 feet off the dock and hit his head. He lost consciousness and was hospitalized.",1
"An employee was standing near a coworker who was picking up a metal rod that was about 10 feet long. The employee was struck on the forehead by the end of the metal rod. He sustained a large bump on his forehead and later experienced vomiting, requiring hospitalization.",1
An employee's right thumb was amputated while operating a chop saw.,0
An employee got off the forklift to open the warehouse door. The forklift rolled and the employee was pinned between the forklift and a transformer box injuring his left hip and knee.,1
"An employee was setting up steel plates (each approximately 300 pounds) on a mold cart.  Two plates were set up vertically on the cart. One tipped, knocking the other over while the employee was holding the plate.  His right middle fingertip was crushed between the 300-pound steel plate and mold cart.",0
An employee fell and injured their right hip while retrieving a box of gloves out of the storage room.,1
"An employee was inspecting an extruder machine before starting production. He slipped and attempted to steady himself with his hand. His left-hand middle finger slipped into a 2-inch opening of the pneumatic ""vent stuffer,"" amputating the fingertip.",0
"On November 9, 2015, at 1540 hours, an Urban Concrete employee was participating in a drilling operation when the dislodged auger being used on a construction vehicle struck him on the back, breaking seven ribs. He was hospitalized.",1
"An employee was attempting to assist a coworker when a concrete form became dislodged and struck him, causing abrasions and contusions to his right hand and leg. He was hospitalized.",1
"An employee pulled the chain to lower the lift gate on a truck about to be unloaded. The gate caught his finger, partially amputating the side of his left third digit.",0
"An employee was performing sanitation activities when his sleeve got caught on a roller. The machine rollers then pulled his hand into the machine, amputating it.",0
"An employee was on a ladder winding the tension spring for an overhead door when the tension spring blew apart, causing the employee to fall off the ladder. The employee suffered shattered heels and a back injury.",1
"An employee was removing a piece of unistrut, lost balance, and fell catching a fingertip on the unistrut and amputating it.",0
"An employee was removing material from a warehouse using a carry deck (crane). As he backed out of the space, his elbow got caught between a pole and the carry deck, causing a laceration and nerve damage to the elbow.  He was hospitalized for surgery.",1
An employee was performing an equipment check when he noticed boxes of product had fallen off the conveyor. He was putting boxes back on the conveyor when his hand got pulled in. He suffered an arm laceration and was hospitalized.,1
"On November 09, 2015, at approximately 5:03 p.m., an employee working on a trench fell 10 feet into the trench. He was hospitalized with a broken tibia, requiring surgery.",1
"An employee was cutting a 4' x 8' x 1/2"" piece of gatorboard into 5"" strips using a table saw when three of his left-hand fingertips were amputated, requiring surgery.",0
An employee was lifting a manhole cover using a handheld hook. The cover slipped off the hook. The employee tried to catch it and amputated his left middle finger.,1
"An employee walking in the hallway slipped on a plastic bag and fell, fracturing the spine.",1
"On or about November 9, 2015, an employee hurt his lower back while moving a 55-pound box of fittings (plumbing supplies) from a push cart to the pallet jack. He was hospitalized with an ergonomic injury that affected the lumbar region of his spine.",1
An employee was standing in the lowered bucket of a skid steer and facing the operator when a rough terrain forklift that was just re-fueled backed up into the skid steer and severed the employee's leg. His leg was amputated at the hospital.,1
"On 11-9-2015, at 11:00 a.m., an employee was using an electric plumbing coil snake to clear out a drain when the coils wrapped around his left hand and fingers.  His left index finger had to be surgically amputated.",0
"An employee was attempting to remove scrap material from the stamping press. The injured employee's hand got caught in the material, and the right-hand middle finger was partially amputated.",0
"On November 9, 2015, an employee was hospitalized after a medical appointment for persistent cough and allergies that may be work related due to poor indoor air quality.",1
"An employee was helping a coworker re-energize a fire pump. There was a very loud bang, and the employee was struck in the middle of his back by an electric charge from the casualty power biscuit for the fire pump, which was behind him. A hole was burned through his shirt and there was a 2.5- to 3-inch circular black mark on his bare skin.",1
"An employee lifting a piece of granite slipped on the floor and fell, breaking his ankle and requiring hospitalization.",1
"An employee was unrolling a roll of 2-gauge metal by hand.  While pulling against a pipe wrench to roll the metal, he tried to keep the metal from bunching up by placing his hand between the spool and the rollers it sat on.  He pulled on the wrench, and his left-hand ring finger got caught between the rollers. His middle fingertip was partially amputated.",0
"An employee was changing out a tire on a shuttle wagon when the machine slipped off of the jacks and fell on the employee, breaking his pelvis.",1
An employee was drilling into studs when the drill kicked back and caught his right-hand index finger.  His fingertip was amputated just behind the fingernail.,0
"An employee was climbing a fixed ladder on a tanker trailer when the ladder rungs broke, causing the employee to fall backwards. The employee sustained broken ribs and a fractured scapula.",1
"An employee fell from the fifth floor to the first floor, injuring his head and requiring hospitalization.",1
An employee was transporting a pot of hot water from the stove to a sink when she slipped and fell. She suffered burns to both feet and legs.,1
"An employee was reading the gas meters from house to house when she slipped and fell down, breaking her ankle.",1
"An employee was struck by a come-along, breaking his leg.",1
An employee fell and broke his knee after slipping on spilled liquid in the hallway.,1
"On November 10, 2015, an employee was cleaning scrap from one end of a press conveyor. A coworker turned on the conveyor, and the employee's wrist got caught in a pinch point. The employee sustained a degloving injury to the left wrist.",1
An employee was standing on the third rung of an A-frame ladder to replace a vent cover when he fell to the ground below and fractured his left ankle. He required surgery.,1
"On 11/10/15, an employee tripped over a pallet strap and fell, breaking her left arm between her wrist and elbow. She was hospitalized.",1
"An employee was adjusting the rollers on the skinner. The machine was locked out at the time. After the adjustments were finished, the employee removed tools from the machine, removed the lock, and re-energized the skinner. The employee pressed the foot pedal and the machine started. The employee's left hand was on the surface of the skinner, which grabbed the employee's left arm sleeve and pulled it into the skinner, severely lacerating the employee's left hand and partially amputating the left-hand thumb.",0
Three of an employee's left-hand fingertips were amputated while he was adjusting a press brake to bend 90-degree angles on bench seating.,1
"An employee was attempting to move a 1-ton piece of steel from a forklift to a processing machine using an overhead crane. He was struck by the stock, which dropped on his left leg, causing blunt trauma.",1
"While attempting the get a delivery truck out of the mud, two employees placed wood sections of plywood behind the rear tires of the vehicle. The driver got behind the steering wheel of the vehicle, while the injured employee stood at the back of the vehicle. The driver starting backing the vehicle up and struck the employee's right leg, breaking it.",1
"Three employees attempted to repair a fill slide on the lower part of a die, which would not actuate during production. The lower die was mostly disassembled; it is air-powered when installed. They used air pressure to manually troubleshoot the issue. They further disassembled the die. The injured employee placed his hand on the die shoe, which activated the die, crushing his left-hand pinky and ring finger.",1
"As the employee was walking on the second level of a frame and brace scaffold towards the fixed ladder, he slipped on the wet planks and fell 12 feet to the ground resulting in a broken left femur. The planks were wet due to rain.",1
"An employee was troubleshooting a packaging machine. The machine engaged, and his hand was pushed by the belt. When he pulled his hand back, his fingertip was amputated.",0
An employee's left index finger was cut by a kitchen knife while the employee was preparing salmon in the kitchen.,1
"Two employees were working on a labeler.  The first employee was cleaning the fingers of the labeler, while the second was working on a sensor. When the second employee finished his work on the sensor, he closed a door on the machine, causing a rack to move forward and catch the first employee's left-hand middle finger. The first employee suffered an avulsion that required surgical amputation of the fingertip.",0
"An employee was unloading equipment from a tilt trailer. A D-ring from one of the hold-down straps was caught between the trailer and the tilt bed. The employee tried to knock out the D-ring with a sledge hammer. When the D-ring was knocked out, the trailer bed came down and amputated the employee's right index fingertip.",0
An employee had a heart attack while moving a vending machine.,1
An employee fell from the pallet jack he was operating when the pallet jack struck a guardrail. The back of his head struck the ground and was lacerated.,1
"An employee was helping a truck driver unload a truck at the post office dock. As the dock lever pulley was engaged, the front lip of the dock leveler did not extend properly. The employee attempted to lift the front lip and her right index finger entered the hinge where the lip and plate meet. Her finger got caught and her right index fingertip was amputated.",0
An employee had been burning sugar cane. An ember blew into the bed of the employee's pick-up truck and ignited a safety gas can. The employee's left leg was burned.,1
Workers were breaking up concrete to install gas lines and were placing the concrete chunks on a flatbed truck. The injured employee was operating a backhoe. The flatbed operator tilted the bed of the flatbed truck slightly to make it easy to move concrete into the bucket of the backhoe. The injured employee then climbed up onto the tilted flatbed and began moving the smaller pieces of concrete into the bucket of the backhoe by hand when a large piece of concrete slid and pinned his ankle between the bucket of the backhoe and that large piece of concrete. His ankle was crushed.,1
An employee was unloading a trailer using a motorized pallet jack when the jack pinned the employee between the jack and the wall of the trailer. The employee was hospitalized with a fractured left shin.,1
"An employee entered a sewer/manhole during low flow to install a 36"" pillow plug and block flow. During installation, the plug failed and ruptured. The employee was knocked down, fracturing his right arm and wrist. He required surgery.",1
"On or about November 10, 2015, an employee was greasing the drive shaft on the end of a conveyor. The employee's sleeve got caught in the conveyor, and the employee's hand was pulled into the drive shaft. The employee's fourth and fifth left-hand digits were lacerated and fractured.",1
"An employee received electrical burns to his arm, chest, head, and elbow while testing a 4160-volt breaker panel.",1
"An employee was changing a valve on a trailer when the valve popped, causing the hose to disconnect and swing. The employee was exposed to propylene, requiring hospitalization for chemical burns.",1
"An employee reversing a forklift from a trailer struck another employee that was walking by on the dock. The rear tire struck the injured employee's right foot, causing a severe laceration and near amputation of toes.",1
An employee's right big toe was crushed and fractured by a 237-pound breader hopper that tipped over after being struck by a trash bin pushed by another employee.,1
An employee was cleaning a set of pinch rollers.  The employee's right hand and arm were pulled through the rollers and crushed. The machine was not shut down and locked out at the time of the incident.,1
"An employee working in the storage area tripped over a box on the floor, fracturing their left femur.",1
"An employee was adjusting a 100-ton jack so that it could push pins that held a gantry tube in position. When the jack was in position and pressure was starting to be applied to the pins, something slipped and caused the employee's fingers to get pinched off. About 1.5 inches of his left ring and middle fingers were amputated.",0
"An employee fell from a 6-foot wooden ladder while changing a lightbulb, sustaining a severe head injury and requiring hospitalization.",1
"An employee was washing the floor. She noticed the gizzard table machine was clogged. As she tried to clear the clog, her gloved hand was caught in the auger amputating the right index, middle, and ring fingers.",1
An employee suffered second and third degree burns on the thighs and forearms after brake cleaning fluid that was on his clothes ignited.,1
"On or about 11/11/2015, an employee was walking in the site parking lot when she tripped and fell, fracturing her right wrist. She required surgery.",1
"An employee was repairing the starter generator of a golf cart when he dropped the bolt. To reach the bolt, he jacked the golf cart up. The cart shifted, and the rear differential amputated his left index fingertip.",1
"An employee was working on the monkey board on an oil rig. There was a high-pressure gas kick (air pocket of gas) during drilling, and the force of the sudden explosion sent the employee flying upward. The employee's back struck the guard rail on the derrick board and was fractured, requiring surgery.",1
"An employee slipped and fell 8 feet to the ground while installing a roof on a mini storage shed, sustaining a broken femur.",1
"An employee was attempting to free the arm piece of a pneumatically operated shear line machine. The machine's arm became free and caught the employee's right index finger between the arm and the frame of the machine, amputating it.",0
An employee's right index fingertip was amputated while he was attempting to remove a jammed piece of wood from a pallet machine.,0
"An employee was hydro-blasting the inside of a tank when the hose ruptured, sending high-velocity water over his foot. The water lacerated his ankle, requiring surgery.",1
"An employee was making a delivery at a residence when she tripped over a paver and fell, landing on and fracturing her right arm.",1
An employee tripped on a pallet while coming downstairs. He landed on his feet but was hospitalized for back spasms.,1
"An employee tripped and fell while walking up a ramp, breaking his right arm.",1
An employee was operating a paver on the parkway when the employee's right index fingertip got caught and amputated (no bone loss) between the screed extension of the paver and the wall of a bridge.,1
"An employee in the assembly area was moving the turret of an endliner machine. The machine was not powered at the time. His right middle finger got pinched between the starwheel and the dog leg, amputating his fingertip (no bone was amputated).",0
Half an inch of an employee's left little finger was crushed and amputated between pipes.,0
"An employee was cutting a 2x4 with a chop saw. While holding the board in place, he lost his grip, and his left ring fingertip hit and was amputated by the blade.",0
An employee tripped while getting a piece of equipment for a critically injured patient. She struck her head on a wall and suffered a concussion.,1
An employee was clearing a jammed cotton saw and was turning it by hand. The saw caught his finger and amputated the tip. The saw was not energized at the time of the incident.,0
"Employees were participating in team building exercises at the sports complex. An employee was climbing a wall when she lost her grip and fell 20 feet. She broke both heels and her thumb, requiring surgery.",1
"Two employees were loading a catwalk and two pipe racks onto a trailer. When the second pipe rack was loaded, the forklift operator did not realize the forks were under the other pipe rack.  The movement caused the pipe rack to roll onto the right pinky finger of the injured employee, amputating the fingertip.",0
"A truck and trailer were backing toward a loading dock. An employee was signaling for the truck to reverse and got caught between the truck trailer and the dock, suffering a broken pelvis. The injured employee was hospitalized.",1
"On 11/11/2015, at 3 p.m., an employee was repairing a truck. He was caging the brake chamber when the air fitting slipped and crushed two left-hand fingers, causing bone loss in one finger.",0
An employee's left pinky fingertip got caught in the door of the company vehicle while he was closing it. He suffered a severe laceration.,1
"An employee's left foot got crushed between power equipment and a support pole while he was driving a forklift, amputating several toes.",1
"An employee was pulling a dolly from under a manufactured house when three fingers got pinched between the dolly and the frame of the structure. Her left-hand middle, index, and ring fingers were partially amputated (soft tissue only, no bone).",0
An employee fell to the floor and broke his hip while performing his job duties.,1
"An employee was walking beside a forklift that was carrying a load of material. The forklift tire rolled onto the employee's right foot, causing him to fall and break his right leg.",1
An employee's left arm and elbow were lacerated by a knife while working on the gutter table.,1
"An employee was cleaning the feed section of a lint cleaner. The machine was running at the time.  While he was removing lint, his left hand got caught by the machine and was pulled in up to his forearm.  A coworker working about 10 feet away ran over and turned off the machine.  The employee's middle and index fingertips were smashed between two rollers.",1
"An employee tripped over a pallet jack while carrying boxes and contacted the floor. She dislocated and broke her right arm, requiring overnight hospitalization.",1
"An employee using a 4 ft. high A-frame ladder missed a step coming down and reached out to grab a metal stud, cutting the palm of his left hand.",1
"An employee was working on a crew, installing and pressure-testing PVC lines for a sewage line.  The PVC pipe struck the employee's face, causing severe damage.",1
"While performing trash pickup, an employee slipped/fell from the rear of the truck. The employee suffered a road rash to the arm and leg, as well as a swollen ankle.",1
An employee's right-hand middle finger was partially amputated when it got caught in an elevator door he was latching.,0
"An employee was performing masonry work from a scaffold. He was changing his work elevation on the scaffold, which required him to remove planking on the current elevation and put it on the next elevation.  During the process, he fell approximately 12 feet, fracturing his ribs and requiring hospitalization.",1
"An employee conducting work on a flat roof fell approximately 17 feet through a skylight, suffering a fractured jaw, fractured hand, concussion, and bruised lungs. The employee required facial and hand stitches.",1
"Two forklifts collided at a corner. The fork from one forklift went into the cage of the other forklift, fracturing an employee's left foot.",1
"An employee was leaning over the CNC machine to see how the part was cutting. The door to the machine was open and the spin spindles were spraying oil onto the floor. The employee slipped on the oil and his knee hit the rail of the door. When he put his hands in front of his face, the pick-off tool on the CNC machine lacerated the right middle finger.",1
An employee on the ground level was struck by a temporary wooden barrier that fell from four stories above. The employee suffered fractures and internal bleeding.,1
"An employee was running a brake press and had a piece of rectangular metal. The employee set the dies and pressed (bent) the short end. The employee then turned the piece to bend the long side, adjusted the dies, and leaned forward. The employee's left-hand fingers got caught in the equipment. The employee's left index fingertip and middle finger to the knuckle were surgically amputated; there was also some damage to the ring finger.",0
"On November 11, 2015 at approximately 12:15 pm smoke from an electrical fire in the building activated the fire alarm.  An announcement was made over the PA system that it was a false alarm, so employee(s) remained at their work stations. Moments later the employee(s) were told to exit the building.  The fire department was called and arrived on scene (for approximately 30 minutes).  The employee coughed for the remainder of the day and the rest of the night.  Due to difficulty breathing and excessive coughing the employee sought care at the emergency room.  She was admitted.",1
"An employee was exposed to an amputation of a fingertip while placing a rear bar onto a cart on November 19, 2015.  The bar fell and pinched the finger, severing the tip.",0
An employee torching a steal beam from a ladder got caught between the beam and a wall when the beam moved unexpectedly. He fractured his pelvis.,1
"An employee tripped and fell on a rug, breaking her hip",1
"An employee was on the ground floor securing the containment with flexible tarp when the wind started to move it around.  A gust of wind blew against the flexible tarp, knocking him backwards and causing him to land on the ground on his right wrist. His wrist fractured and required hospitalization.",1
"On or about November 12, 2015, an employee's arm was pulled into the spindle on a printing press when her glove got caught. She broke two bones in her right arm.",1
"An employee was picking up a lasher turnbuckle while a container was being loaded onto the ship by an overhead crane. When the crane operator was lowering the container onto the ship, the crane operator placed the container in the wrong position and struck one of the twist locks. That twist lock came off and struck the employee in the lower back, causing spasms and finger numbness",1
"An employee was climbing a ladder and fell, hitting his head and fracturing his foot. He was hospitalized.",1
An employee was loading tools into a truck when a golf car struck and pressed him between the two vehicles. He suffered body fractures.,1
"The employee was pressure washing a ditch with a 10,000 psi pressure washer. The worker lost balance and the pressurized water blast lacerated the area between his big toe and the first toe on his right foot.",1
An employee's left ring fingertip was amputated while he was cutting flooring material using a retractable knife.,0
An employee was using a hoist to move a cast iron curb box from a pallet to a conveyor. The employee's left middle fingertip was amputated between the casting and the side panel of the conveyor.,0
"On 11/12/15, and employee was repairing a mold while working under a suspended load. The employee removed bolts to replace O rings. The runner plate separated from the cavity plate, and the 1500-pound mold fell on the employee's legs. The employee's left leg fractured.",1
"At approximately 6:20 AM on November 12, 2015, an employee was opening the third ball valve in a system of six to operate the plasma cutting machine.  There was a failure at the pipe or the valve, and a spark ignited the gas. The employee was positioned at the compressed gas cage when this occurred, sustaining second-degree burns to his upper right chest, right arm, and left wrist.",1
"An employee was operating a cope and drag machine when the employee's hand slipped, causing the employee's thumb to get crushed beneath a plate.",0
"An employee was moving between two pallets when she tripped and fell to the ground, breaking her femur.",1
"While turning a powered pallet jack, an employee ran into a forklift that was occupied and parked. His left leg got pinched between both vehicles, fracturing his lower leg area.",1
"An employee was climbing up the ladder in an attempt to secure it when the ladder retracted and slipped off the wall.  Both the ladder and employee fell to the ground. The employee fell approximately 8 feet, breaking ribs and suffering a swollen spleen.",1
An employee fell and broke the left ankle.,1
"While a rig was being dismantled, the flow line was being moved with the boom line. The flow line pipe got caught on the stairs and pulled them loose from the rig. The stairs fell and struck an employee, who suffered a broken leg, knee fracture, and spine fracture.",1
An employee hit a power line while operating an aerial lift and received an electrical shock.,1
"An employee was operating a milling machine when the feed bar slipped through the rotation and hit his hand, de-gloving his right thumb and fracturing his index finger.",1
"An employee was helping to lift concrete panels when the metal brace slipped out of his hand and cut his right pinky finger. He was wearing gloves at the time. He was hospitalized for surgery, and his right pinky had to eventually be surgically amputated.",0
"An employee removed a flexible hose with a coworker. The bleeder valve was inadvertently opened, and hot non-toxic process fluid came out and sprayed the employee's shoulder. He suffered a second degree burn.",1
"An employee was working in the rod basket of a well-servicing rig when the operator raised the block into the rig derrick. The block bumped the basket, and the employee grabbed the side. His left middle finger got caught between the basket and the derrick, pinching off the end of his finger. The end of his left middle finger was surgically amputated (including bone).",1
An employee was performing preventive maintenance on an extendable conveyor line when his left index finger got caught and amputated between the line and the dock door.,0
"An employee was showing a supervisor something on a punch press die when his foot hit the foot pedal. The press cycled and caught the employees' left index finger, which was amputated.",0
"A crew was removing worn slats from a burn table, which was hoisted approximately 3 feet. When an employee cut one of the slats, the table came down to its home position and cut the employee's right thigh, requiring hospitalization and stitches.",1
"An employee was hooking a trailer when he felt something pop in his back. He experienced numbness and paralysis from the chest down, requiring hospitalization and surgery.",1
An employee got his hand caught in a scalper device and suffered contusions and a laceration. The employee was admitted for observation and wound care.,1
A wire became jammed in the wire brush manufacturing machine. The employee unjammed the wire and used his left middle finger to check if the feed tube was free of debris. The machine toggled and amputated his left middle fingertip.  The machine was not locked out at the time.,0
"An employee was tightening a bolt with a wrench, slipped, and fell to the floor landing on the left side and arm. The employee sustained bruised lungs and a blood clot.",1
"An employee was performing prep work on metal for a highway construction project. An equipment operator was extracting a metal sheet from the ground nearby when the shackle for the sling broke and sent metal shards flying. The shards struck and lacerated the employee, requiring stitches.",1
An employee was operating a machine when his finger was amputated.,0
An employee was between a bolster and a press frame when the bolster rolled on and crushed his right foot and ankle.,1
"An employee was filling a container with a chemical when his coworker accidentally splashed him with sulfuric acid. The splash caused chemical burns to the employee's face, arms, thigh, and shin.",1
"An employee was walking by an applicator when the coupling blew off, spraying anhydrous ammonia that burned the employee's chest and eyes.",1
An employee was ripping wood on a table saw when the blade amputated two of the employee's fingertips. The saw was unguarded at the time.,0
"An employee was preparing to cut some metal material with a chop saw (miter saw) with his right hand holding the material.  The saw blade got caught on the material, causing it to raise and catch two of his fingers. His right index and middle fingertips were amputated.",0
"An employee was pushing a dolly into the store when she slipped and fell on ice. She fell on her right side, fracturing her hip and requiring surgery.",1
"An employee was moving a load of wood logs with a crane. After disconnecting the metal sling clip attached to the load, the logs shifted, causing the employee's finger to get caught between them. The employee's right middle fingertip was amputated.",0
"An employee was operating a forklift and moving pallets. The employee's foot got pinched between the forklift and warehouse racking, breaking bones that required surgery.",1
"On 11/12/15 at 1:30 p.m., an employee missed the final step of the exterior stairs. The employee fell onto both knees and fractured the right knee.",1
On 11/12/15 an employee tripped over a pallet and fell striking the right side of the forehead. The employee was later hospitalized.,1
An employee was loading a mold onto a forklift when the forklift moved forward and caught his finger between the mold and forks sustaining a 1st digit amputation to the right middle finger.,0
An employee fell while walking in the corridor and suffered multiple fractures.,1
"On November 13, 2015, at approximately 2:30 PM, an employee was working from an aerial lift and signaling a crane lifting a pipe. The crane was overloaded, tipped, and struck the aerial basket the employee was riding in.  The employee was bounced out of the aerial lift. When the crane sat back down, the employee was bounced back in the aerial lift and back out again. The employee suffered a spinal fracture, broken ribs, and multiple facial fractures, requiring hospitalization.",1
An employee was hospitalized with injuries sustained during a helicopter crash.,1
"On 11/10/2015, an employee was hospitalized with a rash that developed on her bilateral forearms after transferring a patient.",1
An employee was unloading pipe racks when a rack fell on and broke the employee's leg.,1
An employee was performing maintenance on an engine when some of the fluid got on his hands and burned them.,1
"An employee was moving metal tubes onto a forklift when a tube began to slip out of his hand.  He attempted to pull his hand out of the way, and his finger got caught between two tubes. His left index fingertip was amputated.",0
"On November 13, 2015, an employee was feeding a large-format print into the laminator.  The employee's fingers got caught between the two large rubber rollers.  The employee's left-hand ring fingertip was amputated, while the middle finger was lacerated and required stitches.",0
"An employee fell from a scaffold located in a stairway, fracturing their vertebrae.",1
"An employee got on his truck to check the slump at the ready-mix plant. He slipped and fell approximately 4 feet, breaking some ribs and suffering a hairline fracture to his pelvis.",1
"While driving a powered industrial truck, an employee's foot slipped off the side and his calf was pinned between the truck and the wall. He suffered tissue damage in his calf.",1
An employee bent over to pick up his tool bag and felt his back pop. He was hospitalized with a back injury.,1
"On 11-13-2015, at 6:30 p.m., an employee was riding the forks of a forklift when the forklift ran into a cement post, breaking his left femur.",1
"On Friday, November 13, 2015, an employee was moving a wooden pallet when he got a splinter in the palm of his right hand. He was later hospitalized when the splinter became infected.",1
An employee's left hand received an electrical shock when it grabbed an electrical conduit wiring as he climbed down a ladder.,1
Two of an employee's fingers were amputated.,1
A Bobcat employee was loading steel into a punch press when multiple fingers got crushed and amputated in a pinch point.,0
An employee was standing on a ladder placing boxes on a storage shelf. The employee fell off the ladder and broke the left wrist.,1
"On Friday, November 13, 2015, at approximately 6:04 PM, an employee tripped on the curb when exiting the office. She was hospitalized with fractures to her left wrist, left eye socket, and left femur.",1
An employee was changing a roller on a coding machine. His left hand made contact with the roller and the left index fingertip was amputated.,0
"An employee fell from a 10-foot fiberglass A-frame ladder while setting up to drill a hole in the wall. The employee suffered a concussion, thoracic sprain, lumbar sprain, laceration to the face and forehead, nasal bone fracture, and two broken wrists.",1
An employee was cleaning a bridge along the embankment of canal.  An operator was using a crane and clam bucket. The employee was guiding the bucket when it came down on and fractured the employee's right foot.,1
"On 11/13/15, at 10:45 p.m., an employee was struck by a semi-truck in the parking lot. The employee suffered a broken pelvis.",1
"An employee was pulling tarp over the bed of a flatbed truck. As the employee dismounted the truck, the employee's wedding ring got caught on a truck bolt. The ring finger had to be surgically amputated at the first knuckle.",0
An employee was moving a board inside a trash truck hopper. The blade was moving at the time. The employee's left ring fingertip was amputated between the compactor blade and the side wall of the hopper.,0
An employee was adjusting a conveyor belt when his fingers got caught between the conveyor belt and a metal roller. The third and fourth fingertips on his left hand were amputated (no bone loss).,0
"An employee servicing a security camera slipped down an extension ladder, breaking an arm, nose, and ribs.",1
"An employee was spotting the loading of a skip hoist onto a semi trailer. The employee attempted to adjust one of four legs that support the motor pack for the skip hoist, which is a separate piece from the skip hoist. The motor pack weighed 1,850 pounds. The employee was loosening a clamp on one of the motor pack legs when the leg collapsed, causing the motor pack to fall on the employee, who suffered broken vertebrae.",1
"While pushing wood through a table-mounted, hand-held router, an employee's left-hand middle finger was cut by the router blade; the ring finger was also  amputated at the first knuckle.",0
"On February 13, 2015, a temporary employee was doing pipe fitting work at the job site and lifted a compressor.  The compressor fell down and injured his left index finger. The finger was later amputated.",0
"An employee was restocking hops in the cooler when he fell approximately 8 feet. He landed on a box and fractured his right ankle, requiring hospitalization.",1
"An employee was pulling a hose apart when lime got on and burned the employee's chest, face, and neck.",1
"An employee fell to the ground below while traversing between roofs, injuring his back.",1
An employee was rolling aluminum. The employee's gloved hand was drawn into the in-turning rollers of the rolling machine. The employee required pinky and ring finger surgery. The machine was not guarded at the time of the incident.,1
An employee fell approximately 20 feet from the top of a barge to the dry dock while using a come along to pull a plate into position. The employee shattered the left ankle and damaged two to three vertebrae.,1
"An employee was delivering mail to a private residence and stepped up one step to put mail in a mailbox. As he was turning around to step down, he lost his balance and fell, breaking his right hip.",1
"An employee was counting deer while conducting a wildlife survey from a helicopter. The helicopter crashed into the side of a mountain. The employee broke their right femur and ankle, and possibly fractured three vertebrae.",1
"An employee lost his balance while using a table router on wood trim. His hand came in contact with the cutter head, partially amputating his right middle finger.",0
An employee was assessing ground water when her right hand and knuckle got scraped. Her knuckle became infected and required hospitalization.,1
"On 11/14/15,at 1:30 p.m., an employee was driving a forklift while wearing a body harness and lanyard. The lanyard was run over, strangling the employee and breaking his right shoulder blade.  He was hospitalized overnight.",1
"On 11/14/2015, at 7:40 AM, an employee fell from the dock and was pinned between the dock and a truck that was backing up at the same time. He was hospitalized with a broken back and knee.",1
"An employee lifted a rare earth magnet from a materials hopper. He handed the magnet to a second employee.  The second employee took the magnet and began to set the magnet down on an adjacent piece of equipment.  As the second employee set the magnet down, the magnet pulled itself to the piece of equipment that he was going to place it on. His left-hand ring finger was crushed between the magnet and the equipment and had to be surgically amputated at the first knuckle.",0
An employee was attempting to clear a jam in a blow molding machine that makes plastic bottles. The employee's right ring finger got caught in the machine and required medical amputation.,0
"On November 14, 2015, an employee was loading tools and was folding a triangle tool that has steel cables attached to it. The cables had slack in them and when the employee folded them, the cable tightened up and amputated the employee's right pinky fingertip.",0
An employee was operating a folder tender when he attempted to adjust a box of napkins on the conveyor. His hand got pinched between a roller and the conveyor belt.,1
"Employees were dismantling a scaffold and were handing down a piece of plywood, which was 4-feet by 6-feet, when it slipped from a coworker's hands and fell 50 feet. The plywood struck the injured employee in the left foot behind the steel-toe shoe. His left toes were amputated.",0
"An employee was getting out of his semi-truck after parking in the terminal yard. The ground location where the employee parked was an uneven surface. As he stepped out of the truck, he heard a snap in his leg. He was hospitalized for knee surgery.",1
"An employee climbed onto his dump truck to retrieve some information. While descending the ladder, he lost his footing and fell to the ground level below, striking his head. He was hospitalized with a skull fracture.",1
An employee was making a turn while driving a motorized pallet jack in the Textiles area of the store and their left foot was pinned between the pallet jack and a steel column causing an ankle laceration.,1
"An employee suffered several broken vertebrae after being struck by a ""cuber"" machine while repositioning brick pavers on a board.",1
An employee was pulling wire on the slip line of a truck when the wire loop caught and amputated his thumb tip.,1
"On November 15, 2015, at approximately 7:30 a.m., an employee was helping a coworker remove a 6.5-feet tall, 2.5-feet wide, 1.5-feet deep electrical panel. The panel was strapped to a two-wheel hand truck/dolly. The 450-pound cabinet became unstable and fell on top of him, pinning him beneath it. The dolly stayed strapped to the cabinet, and the cross bar on the dolly made contact with the employee's lower leg, fracturing it.",1
A worker was struck by a mini excavator moving in reverse. It rolled over his right foot and fractured the tibia and fibula.,1
"An employee was picking merchandise from a storage rack using a stock picker. She was 2 to 3 feet above the floor at the second shelf of the racking system. She opened the gate and walked out, falling to the floor and breaking her tibia in two places.",1
An employee was outside grinding metal for duct work when a spark or piece of metal blew inside his jacket and ignited it. He suffered 3rd degree burns on his torso and arms and was hospitalized for treatment.,1
"An employee was using a pry bar to pry a chain. The chain freed up, and the pry bar hit the employee on the side of the face. The employee sustained a cheek laceration, broken nose, and fractured sinus bone.",1
An employee was moving a 4-inch-diameter hose to an industrial vacuum cleaner when his clothing and hand were sucked into the hose. The high pressure suction caused the capillaries in his hand to swell. He was hospitalized and required surgery to reduce the swelling.,1
"An employee was installing sheet metal and was preparing to weld. He leaned against the sheet metal, which kicked out and fell. He attempted to catch the sheet metal and it struck him, breaking his right femur.",1
"On 11/15/2015, at approximately 1:30 p.m., an employee was working inside a ground stewards tank, which holds the potable water for the city.  As he went up  some rigging on the inside of the tank, the rigging came loose and he fell down with it. He hit the floor of the tank, breaking his leg and fracturing his face. He was hospitalized.",1
An employee fell off a roof deck and broke bones.,1
"An employee was using an excavator to load concrete slabs into a dump truck. The employee's right leg got caught between the concrete slab and truck tailgate, causing soft tissue damage.",1
The employee was positioning the shoot on the hopper rail car when the shoot broke and the employee fell onto the hopper rail car fracturing three ribs on the left side.,1
"An employee was in the freezer getting a 50 lb. case of turkey. While standing on a pallet, he lost his balance and let go of the case. The case fell on his right leg, fracturing his tibia. He was hospitalized.",1
"While being lifted on a crate of material, an employee fell approximately 20 feet, suffering a fractured pelvis and right heel.",1
An employee working from a scaffold fell 10 feet to the ground while painting the exterior of a street bridge. He suffered three broken ribs and a fractured disc.,1
"An employee was cleaning a machine using a rag. The rag got caught in a nip point, and the employee's right hand was pulled into the machine. He was hospitalized with injuries to his palm and three middle fingers. The machine was running and unguarded at the time of the incident.",1
An employee's foot was fractured after being struck by a forklift on 11/16/15.,1
An employee was struck by a rolling forklift in the warehouse. The employee suffered fractured ribs.,1
An employee was using a tractor with a front-end load bucket to remove bark from under a log deck. The tractor unexpectedly started to move forward and the employee's head got caught between the log deck and a bar on the tractor. The employee was hospitalized.,1
"An employee was changing the force draft fan belt. He turned off the fan. Due to the inertia, the belt did not come to a complete stop and began to rotate. The employee's right index finger got caught between the belt and the pulley, and was amputated between the last joint and base of the nail. The machine was not guarded at the time of the incident.",0
"He was making an adjustment to an extrusion machine puller, which allows the belt to go up and down, when his right middle finger got caught in the belt. His right middle fingertip had to be surgically amputated.",0
"An employee was troubleshooting a malfunctioning machine that is used to wash metal parts. The metal door of the machine fell down on the employee's right forearm, causing a deep laceration that required surgery.",1
"An employee was cleaning out her desk in preparation for her department's relocation.  She kneeled on the corner of her desk to reach the bookshelf located above.  The corner where she was kneeling broke, and she hit her head on the corner of the desk. She was hospitalized with a head laceration and back injury.",1
"While attempting to clean a conveyor belt, an employee's finger was smashed in a gear box. The employee's fingertip was amputated. The conveyor was running at the time of the incident.",0
"On 11/16/15, at about 6:00 p.m., an employee was using a transferrable cart to load a piece of steel into the grit blaster machine. The transferrable cart rolled over the employee's right foot, fracturing it.",1
"An employee was torching (cutting) railroad rails with an oxygen/propane torch when a spark struck his lower left pant leg, causing burn injuries to his shin area. He was hospitalized.",1
"An employee was repairing the overhead bracket, which holds the overhead guard, on a customer-owned forklift.  The overhead guard fell and caught the employee's finger between it and the frame of the forklift. The employee's middle left-hand finger was amputated approximately 1/4"" to 1/2"" from the tip (middle of the fingernail).",0
An employee fell approximately 5 feet from a ladder while installing a ceiling tile grid. He broke his knee and was hospitalized.,1
"An employee was walking toward his truck. When he stepped down to the ground from the sidewalk with his right leg, he felt a pop. He fell to his knees and could not stand up, experiencing tingling and loss of feeling in both legs. He suffered a serious muscle strain to both quadriceps.",1
An employee had swelling of the knee after kneeling down to perform work on the fluting machine.  An infection ensued causing the employee to be hospitalized for treatment.,1
"An employee was moving heavy doors on a drywall cart when a door shifted, fell off the cart, and crushed the employee's left big toe. The employee was hospitalized.",1
"An employee had just finished working on top of a trailer. As he began stepping on the 20-foot aluminum ladder to get down, his foot slipped and kicked the ladder from underneath him. He fell 10.5 feet to the ground below, injuring his head and vertebrae. The employee's body harness was disconnected at the time of the incident.",1
"An employee was working in front of the side boom when the employee tripped and fell. The side boom moved forward several feet, and the boom track ran over the employee, fracturing their right leg and foot.",1
"An employee was walking through a work aisle when she tripped on a co-worker's foot, causing her to fall to the ground and break her left hip. She was hospitalized.",1
"An employee was felling a cedar tree with a chain saw.  A branch of the cedar tree hit an 8-inch maple tree.  When the tension was released,  the maple tree whipped back, knocking the employee to the ground.  The employee was hospitalized with a broken ankle, ribs, and shoulder, as well as a back injury. The employee was wearing PPE at the time of the incident.",1
An employee's left index finger was crushed between two 21-feet-long steel pipes.,1
"An employee was struck by a forklift that was backing up, suffering compound fractures to his left leg.",1
"An employee was cleaning bread crumbs from the end of the conveyor and the flight (guide that keeps the bread separated). The employee's left ring finger got caught in the conveyor, resulting in an amputation to the first knuckle. The machine was unguarded and running at the time of the incident.",1
An employee was cutting wood tack strips with a band saw and suffered a partial amputation of the left index finger.,0
An employee slipped on water on the tile floor and fell fracturing the right leg.,1
An employee was changing out a die in a brake press and pinched a finger between the die and the bed of the machine amputating the fifth fingertip on the right hand.,0
An employee was walking out the door when a gust of wind caught the door. She tried to grab the door and fell striking her head. The employee was hospitalized with a head injury.,1
An employee ran into a guardrail and fractured vertebrae while trying to avoid being struck by a pipe that had fallen from the elevator.,1
An employee's hand was caught between two belt rollers on a conveyor system while trying to pick up heavy luggage. The employee's hand and fingers were lacerated.,1
An employee was using a food processor to slice cucumbers. The employee's nail was removed when it was caught on the blade while unjamming it.,1
"On November 17, 2015, at approximately 10:40 am, an employee operating a stand up forklift to transport tires from the back of the building to the Tire/Battery Center hit a bump and fell off the forklift. The forklift rolled over his foot. He was hospitalized with two broken toes and some damage to the skin.",1
"An employee tripped over wires and fell, fracturing the left leg.",1
"The employee was trying to dislodge a stone that was stuck on the dump truck.  His right middle finger was stuck between the pin and the locking mechanism on the gate, amputating the tip of his finger.",0
An employee was pulling a cart full of patio door frames and the cart turned over striking the employee.  The employee was hospitalized for a fractured left hip.,1
An employee was using a knife to cut a band from a stack of trusses and cut his left wrist.,1
An employee sustained a fractured ankle when she was struck by an oncoming vehicle that entered the work zone.,1
"On November 17, 2015, an employee mistakenly drank cleaning fluid that had been placed in an unlabeled water bottle.",1
An employee was operating a pallet jack and slipped off the pallet jack severely lacerating the right ankle and shin area.,1
"As the employee was cleaning the cheese conveyor, his glove got caught on the conveyor pulling his hand and arm into a rotating circular shaft.  The employee suffered a compound fracture of the right forearm requiring surgery.",1
An employee suffered a partial amputation to his left index finger while attempting to navigate the auto lift tailgate on the company vehicle.,1
An employee was emptying the hopper into a dumpster. The hopper shifted and the employee's left index finger was caught in the hopper's dump door amputating the fingertip.,0
"On November 17, 2015, an employee was hospitalized after falling off a standard curb and breaking both ankles during a routine pre-trip inspection of their truck.",1
A plate machine operator had his foot on/under the plate machine and the moving gantry on the machine caught his foot and drug it causing a chip fracture and lacerations.,1
"On November 17, 2015, an employee suffered a de-gloving of their right hand while using the base fiber feeder on the 9214 mat line.",1
An employee was participating in a team building event and fell breaking his hip.,1
An employee was exiting the rear door of the hospital. A gust of wind caused the door to smash his hand between two arms of the closer creating a pinch point. The employee lost the tip of his right middle finger.,0
An employee was putting her coat away in a closet that was a fire door. The employee started closing the door and caught her hand in the door. Her right pinky finger was amputated to the first joint.,0
The employee was walking into the building from the parking lot and fell onto the landscaping rock injuring both ankles.  The right ankle was fractured and dislocated.  The left ankle was sprained.,1
An employee was painting a balcony when the rail/fence on the balcony broke causing the employee to fall approximately 30 feet and break the right wrist/hand. The employee also had internal injuries.,1
A driver was positioning himself to lift a fiberglass door and dislocated his knee. He was hospitalized.,1
An employee was injured at a delivery stop when his hand and wrist were caught between the lift gate and the truck as the lift gate was being lowered. The employee sustained broken bones and tendon damage to his left wrist.,1
An employee operating a hydraulic power press had his right middle and index fingers caught in the point of operation. The employee had the tip of his right index finger amputated as a result.,1
An employee was loading and guiding tubing into the #1 forming head on the corrugator. As the tubing was loading his right hand got caught in the machine and crushed the middle finger.,0
"An employee had the tip of the left index finger amputated by a 3"" peek tube mold.",0
The wind caught a containment pan the employee was handling and the employee suffered a hernia when he tried to hold onto it.,1
An employee was stacking pallets and used his left hand to prevent the stack of pallets from falling over.  The employee suffered a thumb tip amputation and compound fracture of the left hand.,1
"An employee was entering the training room when she tripped on a raised landing, fell and broke her wrist.",1
"An employee was checking the printer on Machine # 0735-16 while the line was down and not running. He stepped over the wire (approximately 7 inches from the ground) with his left foot and as he attempted to bring his right foot over, his toe caught the wire and he fell forward fracturing the right ankle.",1
An employee was repairing a tire and lacerated his thumb on a protruding nail in the tire.,1
An employee was measuring the inside of a trench box and was struck by a piece of concrete fracturing a finger.,1
An employee stepped into an uncovered hole and sprained their back.,1
"An employee stepped on a piece of fruit, slipped and fell fracturing a hip.",1
An employee fell approximately seven feet off a ladder and broke both wrists.,1
The employee was weed trimming and another employee was mowing on a tractor. The tractor ran over a metal pipe. The metal pipe struck the employee who was trimming on the right leg.,1
An employee suffered an avulsion of his left thumb that was later amputated in the hospital.,0
An employee was walking across the first floor of the building under construction and fell through a hole in the floor breaking the left wrist.,1
A temporary worker doing carpentry work for a client company suffered a back injury resulting in hospitalization.,1
A mail carrier fell and struck his head on the ground while delivering mail on his route. He was later diagnosed with bleeding in the brain.,1
"On 11/18/2015, an employee was doing paperwork at his desk when he felt a sting on his left arm.  When he looked at his arm, he noticed a bite mark from an insect. He ignored the bite initially, but the pain became worse and he decided to go to the hospital on 11/22/2015 at which time he was admitted for treatment.  Medical staff determined that he had been bitten by a brown recluse spider.",1
"An employee was working on the packaging line. While he was manipulating pallets, his foot was caught between two conveyer belts injuring the lower leg.",1
"An employee was cleaning a portable packing machine when it was inadvertently powered-on, resulting in the amputation of four fingertips on the left hand.",1
A piece of wood got stuck in the feed conveyor.  The employee tried to free the board and when he did it went into the rip saw and a piece was ejected striking the employee and rupturing the intestine.,1
"An employee was responding to an emergency alarm, got up from the desk and tripped over computer cords falling to the floor and breaking her left hip.",1
An employee slipped and fell down stairs injuring both knees.,1
An employee was operating a stamping machine and got his right hand caught in the stamper. The employee was hospitalized on 11/18/2015 and underwent surgery to repair fractures on two fingers.,1
An employee climbed on top of a front load garbage truck to remove debris from the canopy area.  The employee then fell approximately 10 feet off the truck fracturing the left hip and arm.,1
An employee made contact with an energized line and received flash burns to his left hand. ,1
An employee was walking down a ramp towards the customer's car in the parking area when he slipped and fell on his right arm and broke his wrist.  The ramp was wet from rain.,1
"On November 18, 2015, an employee suffered a fingertip amputation while working on a part revolution punch press.",0
The employee was operating a coiler when he noticed a pin/shaft was coming out of the machine. The employee stopped the machine and knocked the pin/shaft back into place with a hammer.  The metal pin/shaft shattered and a piece of metal lodged in the employee's stomach.,1
An employee working the paunch table amputated part of his right thumb.,0
"An employee was loading a washer onto a company truck outside of a residential customer's address. The employee slipped on the lift gate and fell. When he fell, the washer fell on top of him causing an unspecified back injury and hospitalization.",1
An employee was lifting a forklift attachment and smashed this thumb between the swivel hook and the forklift attachment resulting in the amputation of his right thumb tip.,0
An employee was repairing a barrel threading machine and amputated the left index fingertip when it became caught between the gun barrel and a clamp.,0
"On November 19, 2015, an employee was mixing a batch of chemicals and spilled resin near his face, and on his hands and arms. At the time of the spill, he took a shower and returned to work. Days later he began to feel very ill and was hospitalized.",1
An employee was working at the facility when the employee felt ill. The employee was hospitalized due to an allergic reaction to indirect contact with latex gloves at the facility.,1
"While removing a discharge hose from a water pump, an employee was exposed to hot water and suffered burns to the arms, neck and abdomen.",1
"An employee was caught in the feeder portion of a structural steel vertical band saw (17 inches),  resulting in a fractured pelvis.",1
An employee ingested Tilex cleaning solution.,1
The tip of a bicycle mechanic's thumb was amputated while servicing the drive chain of a stationary cycle.,0
"An employee finished connecting the drop fitting to start the fuel delivery. When he turned around, he tripped over one of the safety cones and fell onto the pavement breaking his hip. He was hospitalized.",1
"An employee tripped and fell, breaking an ankle.",1
"An employee was installing fire taping on a drywall from a 16 ft. extension ladder. He fell 9 feet to the ground resulting in contusions to his left ankle, lower back, upper back, shoulder and neck.",1
An employee received chemical burns to the right forearm while transferring 98% pure sulfuric acid from a tank truck.,1
"On November 19, 2015, an employee was using a hand held air blower to clean wood chips off a shaper table while the cutter head was running. The employee's hand made contact with the cutting head, amputating the right index finger and severely lacerating the right thumb.",0
"An employee was using a stamping machine and suffered the amputation of the left frontal oblique, fourth digit.",0
A temporary employee was pulling plastic from behind a stack of boards. The boards fell and broke his leg.,1
"An employee was securing a steel plate under a barge on a dry dock. The 24"" X 14' steel plate weighing approximately 285 lbs. came undone from the lifting mechanism and struck the employee in the back.",1
An employee was splashed in the face with a cleaning chemical (extreme degreaser) while cleaning a kitchen at a client site. The employee was hospitalized for chemical burns.,1
An employee was cleaning wet materials from a dust auger and his left hand got caught inside the auger while in operation resulting in the amputation of the thumb tip.,0
" A worker was cutting 8"" steel pipe with a pipe cutting machine and got caught in the point of operation amputating the right index and middle fingertips.",0
"An employee was walking her mail delivery route in a residential neighborhood. While stepping down from a step or curb, she lost her footing and fell. She suffered a broken bone in her lower left leg and was hospitalized for treatment.",1
An employee got her finger pinched in the conveyor on the packaging line resulting in the amputation of the left ring fingertip.,0
An employee suffered a finger amputation after their gloved hand was entangled in a rotating drill bit.,1
An employee was moving buckets of liquid potassium hydroxide and some of the liquid spilled onto his foot causing severe chemical burns. The employee was hospitalized.,1
An employee injured their knee and ribs as a result of a fall from a ladder while removing a fuel filter on a crane.,1
An employee slipped and fell on the wet marble floor near the entrance to the facility resulting in a hamstring tear and lower back pain due to bruising and contusions.,1
An employee was operating an angle line fabricator. The angle iron rolls in and it's measured and cut to length by the machine. The employee was adjusting the punch that cuts the angle iron with a wrench between cycles. The punch came down. The angle iron got stuck on the punch and retracted with the punch crushing the tip of the employee's left middle finger between the angle iron and the machine.,0
An employee suffered a puncture wound on his left hand when attempting to retrieve uprights from an elevator shaft that had taken on water. The wound became infected and the employee was admitted to the hospital for treatment.,1
An employee was injured while repairing a powered industrial vehicle at the customer location.,1
An employee amputated the left pinky finger when the die blocks on the micro weld machine came down it.,1
An employee was polishing a four inch bar in a lathe. The soft emery paper got caught around the rotating bar and crushed the employee's fingers.,1
"An employee was operating a dump truck and another employee was outside the truck attempting to shut the tailgate. The tailgate was stuck open and the employee was pulling on the tailgate trying to get it unstuck. As the employee pulled on the tailgate, the truck moved forward and the tailgate shut on the employee's hand resulting in amputation of the left middle fingertip.",0
"An employee fell while descending the stairs at the health clinic, suffering multiple contusions and fractures to the left numerus and right elbow requiring hospitalization.",1
An employee was winding up a 42 inch wide belt and got his foot caught between the belt guide on the conveyor and the belt. The employee's right leg was broken just above the ankle.,1
"An employee was operating a rail king (equipment that moves rail cars) to couple two rail cars.  The rail cars would not couple, so the employee bumped the rail cars and the front rail car started moving.  The employee got off the rail king and attempted to get onto the moving rail car to set the brake.  The employee slipped as he was getting onto the rail car and a wheel ran over his left foot amputating at least two toes. The employee was transported to the hospital where he underwent surgery and the left foot was amputated.",1
An employee slipped and fell and hit his head.,1
An employee lost balance and fell off a ladder breaking a leg.,1
"A roll-off truck driver was trying to untangle the automatic load tarp and fell approximately 8-10 feet to the ground. The driver suffered trauma to the head, back and shoulder.",1
"Two maintenance employees were troubleshooting a switch gear at an unmanned pipeline compressor station when an arc flash occurred.  One employee was hospitalized after receiving burns on his hands and face.  Another employee was treated, but was not hospitalized.",1
A drain pipe that was being lowered into place crushed a worker's left index finger resulting in amputation.,1
The employee was working with a bench mounted drill press and amputated the right middle finger at the second knuckle.,1
An employee who had been performing decking operations suffered spinal injuries after he fell 12 feet through a guardrail to the plywood below.,1
"An employee, who was providing patient care, was exposed to peanut products, which aggravated the employee's allergies resulting in hospitalization.",1
An employee was inspecting a flat glass panel when the panel shifted and pinched the employee's left wrist and pinky finger between the glass panel and the machine's railing. The employee fell and amputated the left pinky finger and broke the left wrist and ankle.,0
"An employee used the ladder to go down into the 8 feet deep trench. He stepped onto the floor of the trench and started to sink. His co-worker dropped down an emergency retrieval sling and as he was pulling himself up with it, he hurt both legs resulting in torn ligaments.",1
"While standing in an aisle, an employee picking cases and loading them onto an electric pallet jack was struck by another electric pallet jack operated by another employee resulting in a broken leg.",1
"Two employees were preparing to weld a 6 inch pipe. The anchor bolts that were holding the pipe came out of the concrete. The pipe fell and struck the ladder on which the employee was working. The employee was thrown 4 feet off the ladder to the concrete below striking his head. The employee suffered fractured ribs, a fractured eye socket, and minor bleeding to the brain.",1
An employee was assisting with the unloading of granite curbing from a flatbed trailer. The bucket of the excavator being used to unload the curbing struck a length of curbing causing it to fall onto the employee's leg and causing injury.,1
An employee amputated a thumb.,1
"On or about November 20, 2015, a clipper machine operator amputated the right middle fingertip while cutting bundles of veneer.",0
"On Friday, November 20, 2015, two concrete truck drivers were washing their respective concrete trucks at the same time in the wash down area at the concrete mixing plant. Driver #1 finished washing his truck and started driving out of the wash down area. After pulling out some distance from the wash down area, Driver #1 looked in both mirrors and noticed Driver #2 laying on the ground. Driver #1 stopped to assist Driver #2 who stated that he was run over when Driver #1 pulled away. Driver #2 sustained foot, leg and shoulder injuries requiring surgery.",1
An employee tripped over the drainage system and fell breaking the left leg.,1
An employee carrying large boxes tripped over a pallet and suffered a dislocated ankle and broken right foot.,1
An employee tripped and fell in the art department resulting in a hip and shoulder injury.,1
An employee was removing bolts from concrete forms while the forms were laying on the ground. The form shifted and broke the employee's tibia and fibula.,1
An employee was sitting at an egress booth and fell off a chair striking his head. The employee lacerated his head requiring four staples and suffered a mild concussion and minor bleeding on the brain.,1
"An employee was attempting to place a tarp over the load of gypsum he was going to transport. The employee fell from the top of the load and sustained three broken ribs, a mild concussion and a fractured right orbital. A personal fall arrest system was not used at the time.",1
An employee fell 15 feet from a 20 foot straight portable ladder breaking his left leg.,1
An employee was at the airport resetting a modem for the Doppler radars when he was assaulted and stabbed by a robber. He was hospitalized with severe injuries.,1
An employee was helping to move a portable hydraulic lifting device onto the bed of a pickup truck. One of the folding legs of the portable hydraulic lifting device opened up.  The injured employee reached for the leg of the unit and caught his finger in a pinch point caused by the movement of the leg. His right little fingertip was amputated.,1
An employee was working from a ladder stocking retail products on shelves on 11/21/15 @ 3:15pm.  The employee fell from the ladder and fractured the right ankle.,1
An employee was involved in a putting product into carts and taking product out of carts and suffered a hernia.,1
An employee performing plumbing work was hospitalized after the hole hawg drill he was using caught his glove and amputated his right pinky finger.,1
An employee was removing snow and ice from the employee's vehicle in the company parking lot after completion of the work shift. The employee slipped and fell due to icy and snowy conditions.,1
An employee fell into the trench while trying to cross over it and suffered a moderate to severe spinal injury.,1
A rural carrier delivering a parcel slipped and fell on the ice injuring his hip.,1
An employee was operating equipment identified as a paster and amputated the right thumb tip when it was caught in the machine while trying to remove a scrap of paper.,0
"While working in Bay 3 of the facility, an employee was moving metal plates that weighed approximately 4000 pounds with a pendant control crane.  The plate swung and struck the employee pinning him against another plate and injuring his stomach.",1
An employee suffered a left hand fingertip amputation when cleaning the hopper of a straw machine.,0
"A maintenance mechanic was using a powered hand drill with a 4 foot long ready rod (attachment) to clean out a pipe that was clogged with powder. When he inserted the rod into the pipe, the rod caught his gloved left hand lacerating his fingers. Because of personal medical reasons, the employee opted to have the tip of his index finger surgically amputated.",0
An employee fell to the ground while putting a cover over a greenhouse roof striking their head and breaking their wrist.,1
"An employee slipped, fell, and broke his wrist in an attempt to adjust boxes on a pallet that was on the palletizer.",1
A temp employee was hospitalized with a skull fracture after being struck in the head by the bucket of a mini-excavator.,1
"An employee was manually splitting two trolleys apart, lost his footing and fell. One of the trolley's fell on his leg, breaking it.",1
An employee suffered a broken wrist after tripping over a water transfer hose and falling to the ground.,1
An employee operating a pallet jack got his left foot caught between the pallet jack and a rack.,1
An employee injured his foot operating a powered industrial pallet jack.,1
"An employee was hospitalized after slipping and falling on ice on November 22, 2015. The employee suffered a skull fracture and internal bleeding.",1
"On or about November 22, 2015, an employee was seriously injured and hospitalized with a crushed pelvis and a lower left arm amputation, after being ejected from a front end loader that went over an embankment at the facility.",1
"A janitorial employee was walking out a women's bathroom and collided with a customer. As a result, the employee fell to the ground and fractured the right femur.",1
An employee was cleaning the fryer and set a hot pan of oil behind him.  Then he stepped back into the hot oil and burned his back.,1
Two employees were repairing a hub bearing.  The machine was locked/tagged out and secured.  The first employee attempted to line up the internal keyway slot by reaching in to feel the alignment. The second employee was manually tightening bolts to the hub adapter and when the external housing turned it amputated the tip of the first employee's right index finger.,0
An employee was climbing down the rail car ladder and fell sustaining head and back trauma.,1
An employee was pulled into a running winder crushing the employee's left hand and lower left arm.,1
An employee was cleaning a conveyor while standing on an I-beam approximately 8 feet high. The employee's foot was caught in the conveyor and his big toe was later medically amputated.,0
An employee was repairing the roof's exhaust and got an index finger caught in the motor's belt resulting in amputation.,0
"An employee was driving an excavator up a mountain road. The excavator hit a patch of ice, slid off the side of the road and rolled over. A tree stump came through the cab and pinned the operator's leg between the stump and the controls.",1
An employee was responding to a sensor alert in Grid 4A and injured the left ankle. The employee was later hospitalized for a fractured ankle and infection.,1
On 11/22/2015 at 11:50 a.m. an employee was isolating the gas line to identify the point of a suspected ice plug. He walked over to the meter when the hammer union on a two inch gas line disconnected and the pipe struck his leg injuring the tibia and fibula.,1
"An employee was unhooking the initial hook on a cattle's hind leg. While re-hooking it to another shackle, the cattle's leg dropped down. The slack was not removed from the shackle due to mud and manure. The hook went up, and the employee's right thumb got caught in the shackle, causing an initial avulsion that later required surgical amputation above the first knuckle.",0
"An employee was cleaning loose cotton from around a banding machine when he was knocked into the machine. He sprained his ankle and suffered leg abrasions, requiring hospitalization.",1
"An employee was tripping production pipe in a well using a rig and traveling block. A pipe slipped in the well, causing a pressure change and blowout. The employee went down an escape line and fell at about 10 feet above the ground, fracturing and lacerating his face.",1
"An employee was performing mechanical work on a scissor lift. The employee inadvertently touched the controls, causing the scissor portion of the machine to cycle down on the employee's left index finger, fracturing and lacerating it.",1
An employee was helping a customer load merchandise into their vehicle. A forklift was backing up and crushed the employee's right foot. The employee suffered two fractured toes and required surgery.,1
An employee was erecting steel. He was straddling a steel beam suspended by a crane when the end of the beam seesawed up under him and pinned him against a column. He was hospitalized with a leg laceration.,1
"An employee was walking downhill to the parking lot when he fell and rolled into the back of a parked car. He broke the bone under his right eye, cracked a rib, and broke a bone in his neck (C2). He was hospitalized.",1
An employee was using a band saw when something became caught in the blade. He attempted to push the item through when his left little finger got caught and was lacerated/amputated by the blade. He was hospitalized and had surgery.,0
An employee was painting a door and pinched a finger in the door hinge amputating the fingertip.,0
"An employee was finishing a concrete double v-beam with a trowel when a coworker entered the building with a forklift. As the coworker passed the injured employee, his tire caught the employee and pinned him against the form and forklift. The injured employee suffered scrapes to his back, right arm, and right torso.",1
An employee was measuring plywood with a coworker when the coworker stepped on the plywood. The injured employee's finger got caught between two sheets of plywood and the left ring fingertip was snipped off. The employee required surgical amputation down to the first joint.,1
"An employee walking in the cafeteria slipped on a puddle of milk, fell, and broke his right femur bone. He was hospitalized.",1
"An employee was carrying a tray of dishes from the dining room to the kitchen when the employee stepped in water on the floor near the facility's ice machine. The employee slipped and fell to the ground, breaking the hip bone on the left side and requiring hospitalization.",1
"An employee was squatting down between the axel and the bumper of a truck. The truck started to lean and then fell from the jack stand, striking the employee in his lower back area. He was hospitalized with a lower back injury.",1
"An employee was installing casing joints in a well using tongs when the bite of the tongs malfunctioned and the tongs bucked unexpectedly. The employee's hand got crushed between the tongs and the derrick, causing hand fractures.",1
An employee was cleaning/unclogging the cyclone when his middle finger got caught in the machine. His fingertip had to be surgically amputated.,0
"An employee was helping a coworker demolish a fin fan part that was recently replaced on a cooling unit at the chemical plant. The employee's coworker was tasked with torch cutting a 15 feet x 25 feet, 3/16-inch steel fin fan part into smaller pieces for demolition and removal from the site. The employee was standing 6 to 8 feet away from the torch cutting operation. While the coworker was torch cutting the tail-end area on the fin fan, a side panel that measured 19 feet x 4.5 feet and weighed approximately 650 lbs. came off and fell, striking the employee in the right leg. The employee's right tibia and fibula were fractured.",1
"A maintenance employee was investigating a suspected defective roller on a conveyor belt. The machine must be running to hear defective rollers. His hand was pulled into the machine, and the rollers rolled up onto his forearm. He suffered compound fractures to his radius and ulna and required surgery.",1
"An employee entered the shipping area to turn off an air compressor.  When she turned to leave the area, she tripped over a platform scale on the floor and fell, breaking her arm. She was hospitalized overnight.",1
"On November 23, 2015, at approximately 8:45 a.m., an employee was troubleshooting a 110-volt ultraviolet lamp on a press.  The employee turned the light off, removed a cover, manually adjusted the bulb, and then received an electrical shock. The employee suffered tightness of the chest and elevated blood enzymes and was hospitalized for treatment.",1
"An employee and coworkers were removing a roller from a veneer dryer by hand. The roller slipped out of a coworker's hands, and the employee's finger was  trapped between the roller and the dryer. His left index finger was partially amputated.",0
An employee was positioning a 3-yard container to attach to a truck when his hand got pinched between the container and truck. He lacerated/fractured two fingers on his right hand and required hospitalization.,1
"An employee lost their footing and fell in the jet way while boarding the aircraft. The employee scraped both elbows and knees and broke their right kneecap, requiring surgery.",1
"An employee was replacing purlins on the roof when he fell approximately 30 feet to the ground through a hole, breaking his right arm and leg. He was wearing an unsecured harness at the time of the incident.",1
An employee was cleaning a propane dryer and blowing dust with compressed air when an explosion occurred. The employee suffered a shoulder injury and hand burns.,1
An employee had finished installing drywall and began to disassemble the scaffold with coworkers. Part of the scaffold pinched and cut his right thumb. He was hospitalized for treatment.,1
An employee suffered a fracture to his left hand while moving a hydraulic catwalk.,1
"An employee was taking out the trash when the wind blew the fence into her head, fracturing her skull.",1
"An employee tripped and fell down some stairs, striking her head on the handrail. She cut her forehead and required stitches.",1
"An employee was welding two sections of pipe on top of a skid platform. The skid platform (2 feet high) collapsed, and the pipe rolled onto the employee's lower leg, fracturing the right ankle. The employee was hospitalized overnight.",1
"An employee walked into the Surgical Intensive Care Unit (SICU) room and began wheezing, causing an emergency response to be initiated. Bleach is suspected to have caused the wheezing.",1
"An employee was repairing a slicer and was pushing on the pulley when the motor started. His finger got caught between the belt and pulley, amputating his right middle fingertip and requiring surgery.",0
An employee was thrown from his horse while rounding up cattle.  He hit his head and blacked out. He also fractured ribs and injured his right knee and shoulder.,1
"An employee was conducting site preparation using a mini excavator when the vehicle flipped over, causing him to break his hip.",1
"On November 23, 2015, an employee was reversing a powered industrial vehicle. The employee got on the walk behind the lift, began to back up, and became pinned between a railing and the lift, suffering a crushing injury to the right lower extremities.",1
"An employee was spotting a front end loader. A traffic vehicle did not yield on the worksite and struck the front end loader, which in turn struck the employee. He broke bones in his right leg.",1
"On or about 11/23/15, at approximately 10 p.m., an employee walking on the jobsite was struck in the chest by the arm and bucket of an excavator. The employee was hospitalized with a bruised heart.",1
An employee was using a robotic welder to lift a heavy pan of metal parts when he experienced a hernia that required surgery and overnight hospitalization.,1
"An employee operating a truck was making a delivery on November 23, 2015. While exiting the vehicle, the employee stepped into a pothole, lost their balance, and struck their head against the pavement. The employee was hospitalized with a severe concussion and nausea.",1
An employee's fingertip was amputated while reaching into a machine that was actuated by another operator. The employee required reattachment surgery.,0
"An employee was fitting a 40-foot steel plate onto the bow rake of a barge. The plate came loose and fell on the employee's leg, breaking the employee's femur.",1
"An employee in a roadway work zone was struck by a vehicle that left the roadway.  The employee had dismounted the equipment in a coned area when he was struck.  His leg broke, and he was hospitalized for treatment.",1
An employee was attempting to dump scrap metal from a dumpster into his truck using a robotic arm. He was found disoriented in the cab of his delivery truck with a broken collar bone and concussion.,1
"After performing electrical work, an employee was stepping down from an aerial lift when he slipped and injured his back, requiring hospitalization.",1
An employee was performing maintenance on a piece of equipment when his left index finger was caught and amputated between a chain and sprocket. He was hospitalized.,1
"On 11/23/15, at about 2:30 a.m., an employee was operating a forklift to empty a hopper of garbage into a dumpster. He placed his hand on top of the fork while pushing up on the hopper tilt release lever. When the hopper tilted forward, the employee's finger was pinched between the top of the fork and the bottom of the dumpster. His left index fingertip was surgically amputated.",0
An employee slipped on ice and fell. The employee was hospitalized for head trauma.,1
An employee was descending a fixed ladder into an elevator pit to repair a sump pump. The employee fell 4 to 5 feet into the pit and suffered head trauma.,1
An employee was cutting billets using a band saw and amputated his right thumb up to 1/3 of the finger nail.,0
"On Nov. 23, 2014, at approximately 9:00 PM, an employee sustained an animal bite (cat) to her right finger.  She was treated and released at the ER. Later, due to swelling, she was admitted to the hospital and underwent surgery on the tendon in her right finger.",1
"An employee was watching an excavator operator dig a hole and he decided to get some measurements in the hole. As he was walking, a large rock rolled down and struck him in the pelvis, breaking his pelvic bones.",1
An employee's fingertip was amputated while the employee attempted to straighten a box in a vertical box conveyer system.,0
"An employee was starting a new run of fiber. As she went to pull the fiber from the oven, her right hand and arm got caught in an adjustable conveyor. Her hand and arm were severely burned.",1
An employee was working on a roof and fell through a skylight. He hit his head and body and was hospitalized with head and back injuries. He was wearing fall protection at the time.,1
"An employee was counting inventory while riding a lift when the vehicle struck the forks of an upright forklift working in the same area. He fell approximately 19 feet with the lift basket and struck the concrete below, breaking his upper right arm, pelvis, and left leg. He was wearing fall protection at the time.",1
An unknown vehicle struck and dragged an employee 60 feet in the work-site parking lot. He was hospitalized with injuries to his entire body.,1
An employee fell through the guard rails of a 10-foot platform and broke his tail bone and vertebrae.,1
"An employee slipped on ice and fell in the parking lot, fracturing her left distal radius.",1
An employee tripped and fell over a floor mat that was rolled up on the floor near the locker room entrance. The employee struck the wall and fractured their right-eye orbital bone.,1
"An employee was driving a golf cart. When he attempted to turn right, the golf cart left the paved path and his right knee hit a trash can. He attempted to hit the brake, but instead stepped on the accelerator. The golf cart flipped on top of him and injured his back, requiring surgery.",1
An employee was hit by a car in the parking lot while walking into work.,1
"An employee was responsible for loading rail cars with peanuts. The employee climbed to the top of the rail car to position the shoot for the loading process. The employee was wearing a retractable harness at the time of the incident. The train began moving forward at a slow rate of speed, causing the retractable lanyard to become fully extended. The employee was pulled from the top of the rail car and impacted the ground resulting in serious injury (bleeding on the brain and a shoulder injury) requiring hospitalization.",1
"While stepping off an electric pallet jack, an employee's foot got caught between a loading dock platform and a metal barricade. The bone(s) above his big toe shattered. He was hospitalized and underwent surgery. The jack was in motion at the time of the incident.",1
"On 11/24/15, at 1900 hours, an employee was operating a rough terrain forklift on a steep grade. The forklift toppled over and pinned his left arm underneath. He was hospitalized with a broken arm and had surgery.",1
"An employee was pulling on a light chain to get an alignment for a pavement edge. The chain broke, causing the employee to stumble, misstep, and fall. He broke his left tibia above the ankle.",1
"While attempting to clean a jet foam airlock, an employee's fingertips were struck and amputated by the spinning part (""squirrel cage"") of the airlock.",0
An employee was operating a gunning machine to shotcrete a cupola. He contacted the flywheel and amputated his right-hand middle fingertip.,0
An employee was operating an electric pallet jack to store products. He fell off the pallet jack and injured his hip.,1
"An employee was threading paper into the padded bag line machine. When the paper passed through the notcher section, the employee attempted to support the paper with his hand. The notcher fired and amputated his right ring fingertip. The notcher was not turned off at the time of the incident.",0
An employee was carving a carcass with a knife when he suffered a laceration to his right knee.,1
An employee's toes were fractured while the employee was driving a pallet jack. The employee's foot was outside the jack at the time of the incident.,1
"An employee was transferring wire cable from a spool to a cradle. His right-hand middle finger got caught between a washer and a bolt, amputating the distal third of his fingertip. He required reattachment surgery.",0
An employee fractured his left tibia when he was pinned by a an electric walking jack while putting a hopper under a shoot.,1
An employee was working the winder machine when the slitter blade failed to complete a cut on the paper. He attempted to complete the cut using a box knife when his right index finger got caught under the turning core. His fingertip was ultimately amputated.,0
"On November 24, 2015, an employee was picking orders and climbed a racking system to reach for a part. While coming down from the racking system, he missed a step and fell backwards to the ground, hitting his head. His coworkers found him unconscious, and he was hospitalized for observation with head trauma.",1
"An employee missed a step while exiting his truck, injuring his leg and pelvis.",1
An employee was climbing up the ladder when he fell resulting in a back injury.,1
An employee was changing a tool inside of a forging press and pinched a finger between the tool and the mold flange. The right index fingertip was amputated without bone loss.,0
An employee was driving a Vermeer flex track loader onto a flat bed trailer when the load shifted forward. This caused the Vermeer flex track loader to fall off of the trailer and strike the employee's foot resulting in crushing injuries that required surgery.,1
An employee was walking from the parking lot to the building caring a casserole dish. The employee tripped on the curb and fell onto the dish. The employee was later hospitalized for broken ribs.,1
"An employee was assisting in moving a monorail frame steel structure by rigging the frame to a winch and roust about. The steel cable carrying a 1,800 pound steel beam snapped and the steel beam fell to the floor, bounced, and struck the employee on the upper left leg and breaking the femur bone.",1
"An employee slipped on the ice while walking from their vehicle to the production buildings, fracturing the right ankle.",1
"Two employees were walking on facility grounds, in the street, by the 1590 Building. They were walking with traffic and one employee was struck by an automobile and was hospitalized with a skull fracture, torn ear that had to be reattached, fractured ribs and lacerations and contusions.",1
"An employee was delivering a carpet with a cart. The carpet fell off the cart, and the employee injured his shoulder when he tried to grab it.",1
An employee fell four to six feet from the top of the tanker truck breaking ribs and the left elbow.,1
"An employee was using a ""PV stick"" to separate wood on a conveyer belt, when it became stuck on a piece of wood and kicked back hitting the employee in the head.",1
The employee was driving a forklift and pinched their right hand on the warehouse rack resulting in an amputation injury to the right middle finger.,0
"An employee was unloading equipment at a storage facility. A 2"" x 6"" x 20' steel bar rolled onto the employee's left-hand pinky finger, crushing it between the bar and trailer. The first digit of the finger was surgically amputated.",0
An employee suffered a partial amputation while performing maintenance operations on an HVAC system. The system for the pressure door was not shut off at the time of the incident.,1
"The employee was walking from her desk to the copy room, tripped over another employee's foot, and fell fracturing her hip.",1
"An employee slipped while climbing down a ladder, hit his face, and was hospitalized.",1
An employee was moving a strapper machine after making boxes. The machine amputated his left pinky fingertip when he moved it back into position.,0
An employee was unloading a truck at the dock area at the end of the day. He fell in between the truck and the dock breaking his right leg. He was admitted to the hospital for surgery.,1
"While on duty, an employee approached a shoplifter to request he return stolen items and was stabbed in the chest and left arm with a knife by the shoplifter.",1
"An employee was walking to the restroom when a forklift operator ran over the employee's right foot, resulting in an inpatient hospitalization.",1
An employee received a distal amputation of his left middle finger while transporting a cart loaded with scaffolding. The rolling cart shifted and the employee's hand was pinched between the cart handle and an I-beam.,0
"On November 25, 2015, at approximately 11:45am, a BORSTAR Agent fell while climbing on top of a mountain.  The agent fell approximately 15-20 feet, bounced on his back, and fell another 5 to 10 feet before landing. He suffered a concussion, a laceration to the back of his head requiring staples, several possible broken ribs, and multiple cuts and bruises.",1
"On November 25, 2015, an employee was removing floor tiles with a razor scraper hand tool. While he attempted to replace a blade on the razor scraper, the blade contacted and deeply lacerated his wrist, possibly damaging tendons.",1
The employee was sliding 1/4 inch by 14 feet long angle iron from the forks of a forklift onto the storage racks.  The employee pinched his right ring finger between the angle iron and the fork of the forklift.  The incident resulted in the amputation of the employee's right ring fingertip.,0
An employee was offloading a metal container (auto part dolly) onto a mobile cart when her left-hand ring finger got pinched between the two metal pieces. Her fingertip was amputated below the nail.,0
"An employee was handling line on a barge when he stepped into an open hatch and fell onto the steel deck, cracking his rib and bruising his liver. The hatch was unguarded at the time.",1
"An employee was removing boxes from an automatic conveyor because they were not sealed properly. Her movement in her working space adjacent to the conveyor line became hindered by the multiple boxes she removed from the conveyor, so she went to push the conveyor stop. As she was doing this, she tripped and fell, breaking her knee cap (patella).",1
An employee's left ring finger was partially amputated while she was removing a valve from a manual valve tester.,0
An employee amputated her left pinky fingertip while cutting tomatoes during lunch preparation.,0
An employee suffered a partial amputation of the right middle finger.,0
The employee was using a step jack to position a patch under a rail car when the jack slipped and amputated the tip of his left middle finger.,1
"On November 25, 2015, an employee was delivering freight to a customer site. While unloading products from his truck, he walked down an icy metal ramp behind the store. He slipped and fell on the icy surface, suffering an L2 compression fracture in his back that required hospitalization. He was wearing his safety boots at the time of the incident.",1
"On November 25, 2015, an employee was loading a 1300 lb. roll of plastic onto a roll stand using an overhead hoist. The roll struck the frame of the press, bounced out of the sling, and struck the employee breaking three ankle bones.",1
"While conducting an inventory check in preparation for an inspection, an employee was climbing a fixed ladder and fell approximately 12 feet. He was hospitalized.",1
The employee was working in maintenance utility area when he stepped through a door and fell a little over three feet to the bottom of an air channel. He fractured his right fibula and tibia.,1
An employee stepped backward into a stairwell on the second floor mezzanine that had no stairs and fell 24 feet to the ground.,1
"An employee attempted to fault a pin motor machine near the point of operation. His finger made contact with a machine part, and his left index fingertip was amputated.",1
"An employee was assaulted by a patient on 11/25/15 at 10:20am. During the assault, the patient knelt on the employee's chest. The employee was later hospitalized for a heart attack.",1
An employee was threading paper into a slitter machine and contacted the slitter blade amputating the left index fingertip.,0
"An employee was pulling shopping carts from a cart corral, tripped, and fell in the parking lot. The employee fractured the right hip.",1
An employee climbing a fixed ladder at a cotton gin slipped and fell approximately 8-10 ft. breaking a hip.,1
An employee was installing holiday decorations from the bucket of a bucket truck when the piston broke on the lower arm of the bucket truck causing the bucket to fall with the employee harnessed inside. The employee suffered broken ribs and a lacerated spleen.,1
"An employee working on a oil and gas drilling rig fell from a height of 85 feet due to icy conditions on the derrick board.  The ladder safety device did not engage properly resulting in the employee's fall. The employee was hospitalized with multiple broken bones, internal injuries, and lacerations.",1
An employee was cutting beef and lacerating his left arm requiring stiches and surgery.,1
An employee slipped on the wet pavement and fell resulting in a broken hip.,1
An employee tripped after catching their foot in a skid and fell.  The employee was hospitalized.,1
An employee bent down to check an in-ground water meter when something punctured his knee. He kept working and washed it off later. Over the ensuing weekend it became swollen with a red line down his leg. He was later admitted for an infection.,1
"An employee sustained second degree burns on the left side of their face, neck, arm, hand and both legs from hot oil. The employee was cleaning a slurry screen for a pump and opened the flange to check for product flow. A coke plug was present and let loose during the pulling of the screen which allowed hot oil to release and spray the employee.",1
An employee was picking up a bag of laundry weighting 10-15 lbs. and strained her back. She was hospitalized.,1
An employee was operating a saw and contacted the saw blade resulting in a fingertip amputation.,0
An operator was in the process of unclogging a machine when his left ring finger was caught and amputated by the equipment.,0
An employee was walking to his vehicle in the company's parking lot and slipped on ice or snow fracturing the left leg and ankle.,1
"While attempting to clean out over flow candy from an unsecured tall display shelving unit, an employee stood on a 4 inch ledge to reach the area and the display tipped over and fell on top of her. Her right ankle was fractured.",1
"On 11/28/2015 at 5:00 pm, an employee was walking up to the door to deliver the pizza when he slipped and fell on the ice near the garage. During the fall, he hit his head and fractured his ankle.",1
An employee crushed their left middle and index fingertips in a patty machine.,0
"An operator was injured while preparing equipment for maintenance by flushing the equipment with condensate (warm water) and flushing it into an oily water sewer system.  While performing the flush, it went to the hydrocarbon sewer where it flashed and ignited. The employee suffered second degree burns to the lower face and neck region and lesser burns to his right hand.",1
An employee was in the process of isolating voltage to the live front transformer in an ice storm.  He was attempting to install a load break device to dump the load and the insulated stick he was using arced from the switch attachment to the fiberglass stick.  The employee was shocked and admitted to the hospital.,1
"A mail carrier slipped and fell on ice, fracturing his leg. This resulted in an inpatient hospitalization for surgery.",1
An employee was unloading boxes inside a trailer. A 35 lb. box of batteries fell and struck the employee in the head. The employee suffered a muscle strain in the neck and possible cracked or broken vertebrae.,1
An employee was greasing a bearing on the air handler. The employee wiped off excess grease from the moving belt and the employee's finger was caught in the belt resulting in the amputation of the right index fingertip.,0
"An employee suffered a broken leg and ankle after slipping and falling on a wet, slick floor.",1
"On November 29, 2015, an employee was hospitalized when exposed to high levels of carbon monoxide.",1
An employee was servicing an HVAC unit when his hand came in contact with live electrical voltage.,1
An employee was attempting to lift a part when the chain/hoist slipped off the part and the chain struck the employee in the face fracturing facial bones on the left side just below the eye.,1
"An delivery driver slipped on snow or ice when getting out of his delivery vehicle and fell on his hip, aggravating an existing condition. The employee was hospitalized for further treatment/surgery.",1
"The employer was delivering trusses to a deck with an all terrain forklift. As the forklift pulled out, the trusses fell onto the deck, the deck gave way, and the employee fell. The employee suffered a broken pelvis.",1
An employee was working on roof installing an exhaust fan. The employee stepped back and fell through a skylight to the floor 12 to 15 feet below. The employee was admitted to the hospital for a head injury and surgery.,1
"On November 30, 2015, an employee was adjusting the throttle cable on his work golf cart. The employee was pulling on the throttle cable and the cart started and moved backwards. He fell to the ground and abraded his left knee. He was seen by the company physician who dressed the wound and the employee returned to work. He was later admitted to the local hospital for treatment of an infection.",1
An employee was backing up the milling machine and struck another employee that was sweeping the road. The employee suffered a fractured tail bone.,1
"On November 30, 2015, a machine operator had his right index finger amputated when he attempted to clean a dough ball making machine.",1
An employee was using a roller cart to move stock paper rolls. The employee caught his left leg between the roller cart and a fixed ladder breaking it.,1
"An employee stepped out onto the damp porch, slipped, and fell injuring her left knee.",1
An employee was using a Sumner roust-a-bout to lift an I Beam.  The roust-a-bout lost balance and tipped over.  The employee tried to stop the I-Beam from falling.  The I-beam fell and landed on the employee's left pinky finger crushing it. The finger was amputated.,0
"A welder was operating a horizontal band saw.  There was a hydraulic clamp for the material being cut.  The employee pushed the button for the clamp and his left thumb was caught in the clamp, cutting it open. The employee was admitted to the hospital for hand surgery.",1
An employee was cleaning a guest room and got a splinter in her left thumb. She was later hospitalized for an infection.,1
"An employee was performing maintenance on the Niagara Punch Press machine. He was looking at the die setting. When the machine cycled, the employee's hand was caught between the pin and bussing resulting in the right forearm amputation.",1
An employee's finger was caught in a rotating part. A finger on the right hand was amputated at the second digit by a physician.,0
A temporary employee was clearing a jam on a cotton swab machine and sustained a fingertip amputation to the left hand.,0
An employee amputated the tips of the right middle and ring fingers when a metal plate fell onto his fingers.,0
The employee was removing a strap from a crate on a rack. The pallet and crate fell off the rack hitting the employee in the chest area.,1
An employee was soldering a water pipe while standing on a 6 foot self supporting ladder. The employee fell from the ladder and was hospitalized for bleeding in the brain.,1
"An employee had his right foot on rollers to walk around a pallet that was in the walkway. When the employee placed his right foot in the rollers, the rollers turned.  This caused the employee to fall backwards. His left foot struck the pallet resulting in a dislocated ankle and a broken tibia.",1
An employee was servicing an internal hangar door when it traveled beyond its limit point. His hand got trapped between the hangar door and a hose reel assembly on the adjacent wall and was crushed. His left ring finger was amputated.,1
An employee was setting beams using a crane and lifting hoist when a beam tipped over and broke his leg.,1
An employee fell on the wet sidewalk and fractured her hip.,1
"After loading a truck, an employee tried to close the door on the trailer. The trailer was moving away, and his finger got caught between the door and the condenser stand that straddles the dock, amputating his right index fingertip.",0
"An employee slipped and fell on ice in the parking lot, breaking her right wrist.",1
"An employee lost her footing and fell in the parking lot, breaking her hip.",1
An employee fell over and bumped his head as he was trying to remove weed stickers from his pant leg and shoes. He suffered abrasions to the head and arm.,1
An employee suffered a partial amputation of the left index finger while servicing/cleaning the sensing device on a paper sheeter machine.,0
"A bathroom stall door swung back and struck an employee in the face, fracturing her nose.",1
An employee fell from an A-frame ladder onto his back and experienced extreme pain.,1
"An employee was using an extension ladder to check the liquid level in a tank when the ladder lost its footing, causing him to fall about 10 feet to the ground below. He fractured his right wrist and was hospitalized.",1
"An employee slipped and fell while exiting her vehicle, injuring her right shoulder.",1
"An employee was moving building material on a construction site using a ""piggy-back"" type forklift. The load shifted and tipped the forklift. The employee hit his head and was hospitalized with a concussion.",1
"An employee was painting while standing on a 4.5-foot baker scaffold. He fell off the scaffold, injuring his head, ribs, and back on the concrete floor below.",1
"An employee was struck in the face while blowing down a reinjection line at an oilfield production location, resulting in facial bone fractures, a hole in the roof of his mouth, tooth loss, and a big gash on his right cheek near/under the lower edge of his safety glasses. He required surgery.",1
"An employee was cleaning a restaurant cooking flue when he fell from the roof to the ground, requiring hospitalization.",1
"While an employee was moving a loader, the loader door came back and closed on his thumb.",1
"An employee was calibrating a machine. As he turned around, he lost his balance and fell. He tried to catch himself by grabbing the machine, which had an exposed mixture arm on it.  The mixture arm was turning and caught the fingers on his right hand, amputating his index and ring fingertips.",0
"An employee was welding on some carbon steel with a MIG welder when his right hand caught on fire. As he tried to put out the fire, his other hand caught on fire. He suffered second and third degree burns.",1
An employee slipped and fell while climbing a fixed ladder to the lashing platform on a ship. He fell 8 feet to the ship deck and fractured his right ankle.,1
"An employee was picking up trash and polishing bollards at the loading dock.  A coworker was also using the same dock to load groceries into a freight trailer. The coworker was using a standup forklift and did not see the employee. When the employee stepped out of the bollard area, the coworker's forklift ran over and crushed his left foot.",1
"An employee was setting up a machine for boxes. While he was cleaning the feed wheels, his left hand was pulled into the feed rolls. He received cuts on his palm and a bone fracture, requiring surgery.",1
"While delivering mail/packages to a residence that had no sidewalk, an employee slipped in the mud, fell, and broke her right ankle.",1
"An employee was cleaning a wheel feed guide. As he exited the area, his hand got caught in the feed channel wheels, crushing and amputating his left thumb.",1
An employee's right index finger was amputated while operating a press machine.,0
"While climbing a fixed metal ladder (ship's ladder) to the high roof of a high school building, an employee slipped and fell approximately 12 feet to the ground, landing on his back and fracturing two vertebrae.",1
"An employee fell 6 feet from a ladder to the cement floor while installing a piece of pipe duct work for an HVAC system. The pipe got hung up on a wire and hit the ladder, knocking him down. He fractured his right forearm.",1
"An employee attached a chain sling to an engine and was removing engine parts with a pneumatic tool. The vibration from the pneumatic tools caused the chain sling to slip, and the engine fell about 6 inches onto the drain table. The employee's left hand was crushed between the engine and drain table, requiring surgery.",1
"An employee was standing on the dock plate, helping to unload a truck, when the truck pulled away. He fell from the load dock to the concrete ground, injuring his head and shoulder.",1
"An employee was on an outdoor sign, installing a vinyl.  He was wearing a safety harness, and the lanyard was attached to a wooden part of the sign, which gave way.  He fell 15 to 18 feet to the ground below, injuring his head and torso.",1
"An employee was kneeling down to hand grate or hand shovel when a bobcat operator struck the employee, injuring his right tibia.",1
An employee was installing a part in a press machine when her leg hit the switch. Her left pinky fingertip got caught in the machine and was partially amputated.,0
"On or about December 1, 2015, an employee's right middle finger was crushed and fractured while setting up the ""straight draw"" press.",1
"While an employee was operating an automatic welding machine, the foot pedal of the machine was activated. His left thumb got crushed between the pedal of the welding machine, requiring amputation. He was wearing welding gloves at the time of the incident.",0
"An employee stepped into a storage tote to retrieve fishing line. The tote tipped over, causing the employee to fall into the hold of the ship. The employee suffered a broken right wrist and right leg, requiring hospitalization.",1
"An employee attempted to remove a jammed piece of wood from a running saw. When the jam was relieved, the 12"" diameter saw started rotating and deeply lacerated the palm of his right hand.",1
"On December 1, 2015, an employee and a coworker had cut down three trees.  While they were cutting up the trees that lay on the ground, the employee's chain saw blade got pinched in a tree.  The coworker, who was located upslope from the tree, made a cut in it to relieve the pinch pressure on the saw blade. When the cut was completed, the tree rolled down the slope and over the employee. He suffered bruises and abrasions to his face and head, as well as broken ribs.",1
"On or about December 03, 2015, an employee was lining up paper on the die cutter machine. The machine cycled, and the employee's finger got caught and was amputated between the machine rollers.",0
"On 12/2/2015, at approximately 12 p.m., an employee was climbing a ladder to the roof to install fall protection anchor points. The decking under the ladder was frosted over.  As the employee climbed the ladder, the ladder slipped, causing the employee to fall approximately 10 feet to the decking.  The employee was hospitalized with contusions to the left shoulder, left leg, and ribs.",1
An employee attempted to remove a metal object from the dough on a dough conveyor. The employee's right hand got caught and smashed between the conveyor and roller.,1
An employee was holding a shaft that was being knocked out when his finger got pinched between the shaft and the repair box. His right middle fingertip was amputated.,0
An employee was holding down product in a weld fixture with their right hand. The employee's right pinky fingertip was pinched in one of two pivot points and the tip was amputated.,0
An employee was operating a bulldozer to conduct site preparation work. Coworkers found him unconscious on the ground near the bulldozer with neck and arm injuries. He was hospitalized.,1
"On December 2, 2015, at approximately 8:45 AM, an employee was changing out propane tanks on a forklift when another forklift operator backed into him, pinning him between the two lifts and fracturing his pelvis.",1
"An employee was evaluating a jam around the back of the cutter machine. His glove came into contact with a guarded belt and pulley, which caught his glove and pulled his right hand in. A section of his right index finger was amputated.",0
"On 12/2/2015, at 12:00 to 12:30 pm, an employee was hand washing the inside of a drinking glass using a rag. The glass broke and cut her hand.",1
An employee saw a build up of rice on the rice polisher feed hopper. He shut off the equipment to clean it. His right fingertip got caught in the feed hopper and was amputated.,1
"While dismounting a material handler, an employee lost his balance and fell approximately 3 feet.  He struck his rib cage on the machine stabilizer, suffering a contusion/bruise.",1
"While delivering a package to a residential home, an employee slipped and fell on wet blacktop pavement. She twisted her ankle and suffered a compound fracture to her tibia.",1
An employee was demonstrating the function of a sliding axle trailer to a coworker when the trailer drifted unexpectedly and caught the employee's finger in one of the adjustment holes. The employee's right index finger was amputated.,0
"On December 2, 2015, an employee was giving a bath to a patient. The tub door closed on the employee's hand, which became infected and required hospitalization.",1
"An employee was securing his cargo on a flatbed trailer. After securing his load, he tripped on the cargo securing strap and fell to the ground, fracturing his left knee and left wrist.",1
"While attempting to clear a jam in a heat seal bag machine, an employee's pinky finger was amputated.",1
"On 12/2/15, at about 3:30 p.m., two employees got into an altercation. One employee was pushed to the ground and was hospitalized with a shoulder and back sprain/strain.",1
"An employee was reaching for boxes while on top of a pallet. When she turned to step off of the pallet, her foot got caught in shrink wrap, causing her to trip and fall. She landed on her left wrist and broke it, requiring hospitalization.",1
An employee was hospitalized for work-related leg pain.,1
"An employee was dumping cardboard boxes into a recycling container using a forklift. When he tilted the forks to allow the boxes to slide off into the container, the pallet also slid into the container.  While attempting to remove the pallet, the employee slipped and fell, hitting his face on the ledge of the container.  He continued to fall to the floor, hitting his face again on the pavement. He broke two eye sockets, his nose, and a bone behind his upper lip.",1
An employee was repairing a hot water boiler when a bolt snapped and the employee was sprayed with hot water. The employee was hospitalized with burns.,1
An employee slipped on an infant toy on the floor and broke her hip.,1
"An employee attempted to move a lawnmower that became stationary. His right foot slipped and fell into the blades, amputating his toes.",1
"An employee was using a jib crane to pick up a return pig. When using the pendant to lift the pig, his finger got stuck between two chain links, amputating his fourth left-hand finger's first pad.",0
"An employee exited a room on the third floor of the building being cleaned. The exit door was unmarked, unlocked, and led to the flat roof, which had a parapet wall. The employee fell three stories and broke a leg.",1
An employee was wearing gloves and sorting I beams with his hands.  One beam slid and rolled and caught his finger. The employee had half of his middle finger surgically removed.,0
"An employee was manually feeding a plastic sheet through a hydraulic/pneumatic press set on manual mode. The press then cycled and caught his left thumb in the point of operation area, amputating his thumb tip.",0
"While cutting vegetables with a knife, an employee sustained a left middle fingertip amputation.",0
An employee was assembling a mobile set of stairs while standing on a ladder. The employee was trying to get a strap off a platform and fell from the ladder to the lower level. The employee suffered a broken jaw and right shoulder fracture.,1
"An employee was walking on top of the load on the flat bed trailer, unfolding a tarp.  He lost his footing and fell to the ground fracturing his skull in the left temple area and his right wrist.",1
"An employee was attempting to connect two dollies. The rear dolly gained momentum, causing the employee to lose control. The dolly tongue crushed and amputated the employee's right-hand ring fingertip.",1
"An employee was walking across the parking lot when he slipped and fell, breaking his right shoulder.",1
"An employee was helping to remove a belt from a pulley attached to a fan used in the ginning process. While moving the belt manually, his finger got pinched between the belt and pulley, partially amputating his right pinky fingertip.",0
"An employee was operating a can densifying machine that crushes aluminum cans. The employee's right foot got caught in the hydraulically controlled door to the machine, crushing and possibly amputating the toes.",1
"An employee traveling on a forklift stopped quickly when a scrubber cut in front of his machine. The machine's load shifted, so the employee exited the vehicle. He slipped and broke his right leg.",1
An employee's left thumb tip was amputated while she was cutting pork loin with a band saw.,0
"An employee entered an oven from a side access door located 12 feet aboveground to clean and clear the rollers of the coating machine. When the employee was in the oven, she stepped onto a pressure release trap door, causing the door to open. She fell 12 feet to the ground below, sustaining multiple fractures to her right ankle and possibly lower back fractures.",1
An employee's left hand was crushed while operating the sheet metal roller machine.,1
"An employee was dumping garbage into the waste dump when an automobile slammed into the back of the truck, pinning the employee between the car and truck. Both of the employee's legs were amputated.",1
An employee suffered burns to 45% of his lower body when a plastic bottle of diesel fuel blew up near him while he was trimming logs.,1
"On December 03, 2015, at approximately 3:00 p.m., an employee was using the brisket saw when the circular blade of the brisket saw lacerated his abdomen. The laceration required stitches and overnight hospitalization.",1
"An employee was operating a spindle machine. The process required 14 bolts, but the employee noticed that there was only 13 bolts. When she tried to put in the 14th bolt, moving parts came down and caught her left-hand pinky finger, amputating the fingertip.",0
"Workers were using bottle jacks to move a heat treatment oven laterally. One of the bottle jacks moved out of position, causing the footing of the oven to come down and crush the injured employee's left hand.",1
"While walking from one patient's duplex to another, an employee slipped and fell on a grassy area that was covered in ice. The employee fractured their tibia.",1
An employee was walking down the stairs and fell forward approximately 3 feet. She dislodged several teeth and fractured her gum line and upper jaw.,1
"An employee was working on a sample table, loading weights into the benefits inserts of a punch machine. She missed a weight in one of the inserts and shut the machine off to add the weight. The machine restarted and caught the employee's finger between the punch and the insert. Her left index finger was amputated.",0
"An employee had just serviced a portable toilet and stepped on the passenger side of the truck. While the truck was moving, he fell off and injured his head.",1
"An employee attempted to retrieve a small strip of scrap metal behind the shears. The employee's foot actuated the machine via the treadle while the employee's fingers were in the point of operation, amputating the right middle fingertip.",1
An employee was working on a motor house belt system when her arm got caught between the belt and the metal beam of the conveyor system.,1
"An employee was carrying an 8-feet-long, 7-feet-wide, reinforced wire mesh on the flat roof of a new building. As he was approaching the area where the wire mesh was to be installed, the wire mesh snagged with the handle of the power pack, causing him to trip. He fell on a 2"" by 6"" foam board, fracturing his lower left leg and requiring hospitalization.",1
"An employee placed material on stacks with a standup forklift. He reversed into a second forklift and was thrown to the ground, injuring his lower back and requiring hospitalization.",1
An employee was getting ready to load two intermediate bulk containers. The two containers slammed against each other and caught the employee's finger between them. The left pinky fingernail tip was amputated.,0
"An employee was assaulted by a shoplifter and was knocked unconscious, suffering a head injury.",1
"An employee slipped on the wet floor in the break room and sustained right wrist, knee, and neck injuries.",1
An employee slipped on a wet floor while cleaning the bathroom and fractured a hip.,1
"An employee was on a ladder repairing a minor water leak on a pipe above the ceiling.  The pipe/coupling failed, and the employee was sprayed with hot water and knocked off the ladder. The employee suffered a back injury and arm burn.",1
An employee was unstrapping office tables from the inside of a truck when the tables fell on top of him. He sustained 10 broken ribs and a gash to the head.,1
"An employee was assisting a pit fitter. When a track hoe operator adjusted a pipe approximately 300 feet away, it caused the pipe to fall off the pipe stand and strike the employee just above the left ankle. The employee's ankle fractured.",1
An employee was moving a metal coil from one part of a metal slitting machine to another. The metal coil sliced through the sling being used and lacerated the employee's right shin and foot.,1
An employee's right middle fingertip was amputated while he was cutting meat on a chuck saw.,0
"Employees were performing new building construction. An angle iron slipped and became caught between other objects at a height of approximately 10 to 15 feet aboveground. An employee accessed a ladder to inspect what the angle iron was caught on and determine how it would be removed when the angle iron fell to the ground and struck the ladder, knocking the employee off. The employee fell approximately 8 feet to the ground and struck their head. The employee suffered wrist and skull fractures and required stitches.",1
An employee was operating a hydraulic impulse system when materials hit him in the face. He was hospitalized overnight with broken facial bones.,1
"An employee was loading railcars with petroleum coke. As he was coupling up the railcars, his left foot got caught under the railcar. He called out to the locomotive operator to back the railcar in the other direction to relieve the pressure off his foot, which was crushed in the process and required hospitalization.",1
An employee's right-hand little fingertip was amputated when a 2x4 piece of lumber dropped suddenly and smashed the employee's finger.,0
An employee was applying a dry-film lubricant with a spray can and nozzle extender onto a conveyor to eliminate/reduce package slippage. The employee's coat got caught in the rollers and pulled his right hand/forearm in. He sustained ligament and tendon damage.,1
"An employee's right foot was run over by a construction vehicle, fracturing the right ankle.",1
An employee was performing maintenance on a molding machine when his right arm got caught and injured. He was hospitalized.,1
An employee was struck by the door handle of a roll-off garbage container when it snapped open while he was manually opening it.  He was hospitalized with bruises and lacerations to the right cheek and a possible nose fracture.,1
"An employee was using a wrench to remove pipe while standing on a stairway platform. The wrench slipped, and the employee fell off the stairway, suffering a lower back injury.",1
"An employee was struck by a car while crossing the street. The employee's right arm broke, and their bowel was punctured.",1
An employee suffered a fingertip amputation while servicing an air unit on the roof of a fast food restaurant.,0
"On December 3, 2015, at approximately 1:45 pm, an employee fell from an 8-foot fiberglass stepladder. The employee was installing an exterior light on the side of a building using a hammer drill while standing on the stepladder. The employee fell from the ladder and struck the concrete driveway, fracturing both wrists.  The employee was hospitalized for surgery.",1
Employee experienced a heart attack while shoveling snow.,1
"Two employees were driving a company golf cart across an intersection when an automobile ran the stop sign and struck the cart. One of the employees sustained five broken ribs and a broken collarbone, while the second employee suffered knee bruises and a strained neck.",1
"An employee slipped and fell while coming out of the laundry room in an inventory home, breaking the right hip.",1
An employee was trying to pop a load bearing out. He put both fingers into the area of the locking pin and then it came down and amputated the distal aspect of the right index and little fingers.,0
"On Friday, December 4, 2015, around 8:30 a.m., an employee got out of his vehicle and slipped and fell on ice while walking in the parking lot. He had surgery for a dislocated/fractured left ankle.",1
"An employee was checking a collection box and lost his balance as he stood up. As he attempted to jump the front of the collection box ditch, the impact of the landing fractured his lower left leg.",1
"An employee was tightening the nipple onto a choke manifold with a 36 inch pipe wrench. As the employee was tightening the nipple, the wrench slipped causing the employee to shift his weight to his right leg and fracture it above the ankle.",1
"An employee was disconnecting a piece of flow iron from a pump. He was supporting the piece of pipe with his left hand and hitting it with his right hand when it suddenly disconnected. Due to the weight of the pipe, it dropped about 1 foot, catching his left ring finger between the iron and rear bumper of the pump and amputating the fingertip. He required surgery.",0
"An employee went into her office, retrieved something, and was leaving to go to a meeting. She tripped on the carpet, fell over her carrying case, and hurt her right side, back and leg. She was admitted to the hospital for surgery on her leg.",1
An employee was cleaning the pipes on the ice cream machine when his right index finger was amputated by the pipe's metal paddle. The machine was not locked out at the time.,0
"While retrieving an item from a trailer, an employee fell through a gap between the dock plate and trailer. One leg fell through first, and she broke her pelvis.",1
"An employee was using the ""button machine"" to crimp pieces of fabric around buttons. One of the pieces of fabric was off center and the employee reached under the guard to slide the fabric back into place.  The employee pressed the foot pedal that operates the machine while her hand was still in the machine and amputated the right index fingertip and fractured the right middle finger.",1
"While walking into the bathroom, an employee tripped on rubber matting and fell on her hip, breaking it in two places. She was hospitalized.",1
"On Friday 12/4/2015, at 6 pm, an employee was scooping flux from a galvanized zinc kettle. As he was putting the excess flux into a 55-gallon drum, the hot flux boiled up and popped. The splash from the flux went down into his leather glove, resulting in second degree burns on the left hand and wrist.",1
"An employee was loading a scrap wheel into a scrap bin while wearing double cotton gloves. The glove got caught on the edge of the wheel as he set it on the edge of the bin to be thrown in. As he let the wheel go into the bin, his right pinky got caught between the edge of the wheel and the edge of the bin, amputating his right pinky fingertip (without bone loss).",0
An employee was bending a piece of metal on a brake press when the metal came up and pinched his finger against the die. His left index fingertip was amputated right below the fingernail.,1
An employee fell 6 feet from a ladder that was leading up to a trailer. The employee was hospitalized overnight with a back injury.,1
An employee was preparing to apply ice melt to the sidewalks around the post office when she slipped on ice and broke several bones. She was hospitalized.,1
"An employee was conducting a rated test on a coil assembly. After completing the test, she received an electrical shock while removing the test leads. She fell to the floor and was hospitalized.",1
A stucco crew set up two A-frame scaffold frames inside a 10x10 enclosed porch area and placed some planks between the frames. The ground that the scaffold was on was not level or solid.  A worker climbed on the planks between the frames and began applying stucco to the walls.  One of the frames slipped and fell over causing the worker to fall to the ground breaking his right arm in a manner that requires surgery. He also suffered scrapes and bruises.,1
"An employee was gluing magnet assemblies at a table with caster wheels. She unlocked the caster wheels and started rolling the table to another location. The table splintered and fell, along with all its contents, onto the employee's right ankle. She was hospitalized and required surgery for a compound fracture to her ankle.",1
An employee was working on an agitator when one of the pieces of equipment shifted and crushed the employee's pinky finger. The finger had to be partially medically amputated.,0
An employee's left thumb tip was amputated while cutting lamb chops with a band saw.,1
An employee was power washing a van when the employee was overcome by carbon monoxide poisoning from the power washer.,1
"An employee reached into a horizontal band saw as it was running to either insert or remove a block. The pipe clamp on the saw closed and pinched her finger between the clamp and the block, partially amputating her left index fingertip.",0
"An employee slipped and fell off the curb, breaking her ankle.",1
"On or about December 04, 2015, a worker was working on a tie machine when a jam occurred. The worker called the injured employee for assistance. The injured employee disconnected the energy source, a pneumatic airline, and proceeded to clear the jam manually. As the employee tried to clear the jam, the machine's cutting knife was actuated, amputating the employee's right fingertip.",0
"An employee was cleaning a transfer roller on a lamination machine with a rag. While using a ""job"" pedal with his foot in slow speed, he began cleaning the roller. The rag got caught and his hands were pulled into a nip point. He was hospitalized and received stitches.",1
"On Saturday, December 5, 2015, at about 9:25 AM, an employee processing fruit on a conveyor belt attempted to remove a grapefruit. His finger got stuck in the roller spreader and the end joint of his right-hand middle finger was amputated.",1
"Employees were attempting to insert a section of U-adjuster shackle into a chain link using a sledge hammer. The injured employee was holding the shackle. As a coworker swung on the hammer, the injured employee's hand slipped and got struck by the hammer. His left index finger was partially amputated.",0
"On 12/5/15, an employee was switching out 55-gallon drums of wall waterproofing material in a waterproofing truck when an explosion occurred. The employee suffered second and third degree burns to the abdomen, back, and face and was hospitalized.",1
An employee suffered a serious injury to his right hand while positioning a 1700 pound could blade onto a table.  The injured employee suffered a broken index finger and cuts to three other fingers on his right hand when the part shifted as it was being moved with an overhead crane.  The injury occurred in the weld shop.,1
"An employee was operating a rigid cable machine when his left hand got caught between a wire and a capstan sheave. While attempting to free his hand, he amputated his left middle and ring fingertips.",0
"An employee was picking up debris in the main work area. He walked up to an excavator as the bucket was turning. The bucket struck his shoulder, causing him to fall down and hit his head.",1
"An employee was cleaning a running conveyor machine. The employee lost balance and put a hand up to catch themselves. The employee's hand and arm were pulled into the machine by a pulley, resulting in multiple hand fractures that required surgery. The pulley was unguarded at the time of the incident.",1
"An employee was attempting to secure an anti-tip chain with one hand while a crane pendant was in the other hand. He lost his balance and fell approximately 18 inches off the platform he was on, lacerating his left kidney.",1
"On December 5, 2015, an employee operating a forklift collided, head-on, with a second forklift operator. The employee was thrown from the vehicle and was struck by his own forklift. He suffered a concussion and a de-gloving injury on his left foot and ankle.  He also fractured his left-foot big toe and was hospitalized.",1
"An employee was inspecting a roof for pesticide application on the building. The employee slipped and slid off the roof to the ground floor, breaking two legs and shattering the right ankle.",1
An employee fell backwards while adjusting wood with a pick-pole and suffered a broken back.,1
"An employee was pulling a wire using needle nose pliers. The pliers slipped, and the wire struck and severely injured the employee's right eye.",1
"An employee was taking merchandise from the backroom to the sales floor. As he was lifting a car jack off a pallet, he heard a pop. He was hospitalized with a back injury.",1
"An employee was about to start moving a train and decided to close the door. When he shut the door, his left thumb was crushed. He was hospitalized with a fractured left thumb.",1
An employee was cleaning tables when she touched fish juice on a dish. She could not breathe and was hospitalized for a food allergy.,1
An employee was installing a curtain wall when his finger was pinched.,0
"On or about 12/06/2015, an employee was standing on a ladder adjacent to a rotating apple grinder shaft when his sleeve got entangled in the shaft. He suffered two fractures to his right arm.",1
"An employee was untangling a wire tangle at the capstan.  The employee tried to cut the tangle when his left hand got caught in the ball of wire, amputating two fingers. The machine was still in operation at the time.",1
"While troubleshooting a jam on a crystallizer machine, an employee's left-hand middle and ring fingertips were amputated by the rotary airlock. The machine was not locked out at the time of the incident.",1
An employee's hand got caught between an unguarded conveyor chain and sprocket. The employee's thumb was amputated.,0
"An employee was hospitalized on December 6, 2015, to have work-related hernia surgery.",1
An employee was troubleshooting a 200KVA welder. The equipment inadvertently cycled and amputated two fingers to the first joint on the employee's right hand.,0
An employee tripped and fell while walking injuring the left femur.,1
An employee was helping another employee clear out a 2 x 4 piece of board on a conveyor belt.  The employee's left hand struck the metal frame of the conveyor belt resulting in the amputation of his left index fingertip.,0
An employee was operating a power press when his left pinky got pinched and amputated by a steel coil.,0
An employee's left index finger was partially amputated while operating a punch press.,1
An employee doing fiber optic installation was climbing a communication pole and fell from an unknown height.  The employee suffered a couple of cracked ribs and a punctured lung.,1
An employee was moving 55 gallon drums and smashed a finger between a drum and the barrel picker. The fingertip was amputated below the thumb nail.,0
"While drilling aluminum, an employee's right middle finger was amputated when it got caught in a stationary drill.",1
An employee at the receiving department was hit in the head when palletized TV's felt over. The palletized TV's were being pulled down using a walkie stacker.,1
An employee was climbing a ladder when he fell for an unknown reason.  The employee was found on the floor unconscious and was hospitalized.,1
An employee's right ring fingertip was amputated while using a band saw to repair a tractor.,0
"An employee was walking along the top of a trench that was 4 feet deep, and was carrying a 13 foot long, 8 inch diameter PVC pipe.  The victim slipped, fell into the trench, and sustained a broken neck.",1
"An employee was drilling a metal bracket onto a machine and was struck by the bracket, suffering an eye injury.",0
An employee was hospitalized when a forklift ran over his foot.,1
An employee fell approximately five feet from a shelf while retrieving a motor.  The employee fractured his right wrist and his right hip and was hospitalized.,1
An employee was adjusting a printing plate and got his hand caught in a pinch point between two rollers when another employee jogged the machine using the registration button. The employee suffered three broken fingers and a degloving injury to the right palm.,1
An employee was removing a coupling from a rotating pipe when his glove was caught in the rotating pipe. The employee's wrist was wrenched and later surgically repaired.,1
A worker fell approximately seven feet from a mobile scaffold resulting in hospitalization for severe head trauma.,1
An employee working on a milling machine cut his hand between the thumb and first finger.  The cut went to the wrist.,1
"An employee tripped and fell over a bucket containing a sodium hydroxide (10-15%) solution. The employee suffered chemical burns to the arms, back and legs.",1
"An employee was walking toward a stainless steel table in the room when she tripped and fell over a hose containing product, breaking her hip.",1
"An employee was moving a pallet with a manual pallet jack when a forklift operator struck the employee while making a U-turn. The employee fell to the ground and suffered a possible hip fracture, requiring surgery.",1
"An employee was working on a pressurized tank trailer when a bolt broke on a lid. The lid flew off and struck the employee in the head, fracturing their skull.",1
An employee amputated four fingers on the right hand while servicing a rotary air valve.,1
An employee was writing a valet parking ticket for a customer when the employee was struck by a vehicle operated by a public driver. The employee suffered a lower torso injury.,1
"A contract employee at a host employer worksite was changing a light bulb while positioned on a stepladder when his clothing got caught on a piece of metal on a rotating shaft, pulling the worker into the machine and fracturing both forearms.",1
"On December 7, 2015 an employee was opening a construction gate for a dump truck to enter when a passenger vehicle tried to pass the dump truck and struck the dump truck.  When the passenger vehicle struck the dump truck it hit the employee resulting in fractured ribs and a fractured pelvis and a head laceration.",1
"An employee's ring fingertip was amputated when the hinge on a used electrical panel failed, allowing the lid to slam down on his finger.",0
"To clear a jam, a temporary employee climbed on top of the in-feed conveyor for residential recyclable materials and struck the operating steel paddle wheel with his foot and broke his big toe.  He was admitted to the hospital as an in-patient for his injury.",1
An employee was operating a PLC saw and amputated part of four fingers when his left hand came in contact with the saw blade.,1
"On or about December 8, 2015, an employee stepped off a step stool and fell to the floor, breaking her femur.",1
"An employee locked out the rip saw to remove a jam when his glove got caught on the blade. The blade, which was still moving under its own momentum, pulled the employee's right hand into a pinch point and crushed three fingers, which were then amputated.",1
"An employee was standing on the ground, pulling overhead cable using fish tape. The fish tape broke or detached from the cable, causing the employee to fall to his knees. He tore quadriceps tendons in both knees.",1
An employee was operating a Milwaukee drill press when his glove was caught in the drill bit resulting in the amputation of the right index finger. The drill bit was not guarded at the time of the incident.,0
An employee was building a part when his finger got caught and crushed between an angle iron and sheet steel. The end of the finger had to be medically amputated.,0
An employee was repairing a trailing arm bushing and pinched his finger between the trailing arm and a tool. The medical report later classified it as an oblique amputation.,0
On 12/09/2015 an employee was spraying insulation and stepped on a drywall screw. The employee was hospitalized when the laceration became infected.,1
An employee fell and rolled her hip on a curb outside the building. Her hip broke and required hospitalization.,1
"An employee was coordinating and participating in a film shoot. The employee performed a jump on a ski hill and landed wrong, breaking the right femur and requiring hospitalization.",1
"An employee was delivering materials with an electric pallet jack and ran over his foot, breaking it.",1
"An employee was attempting to dislodge a small piece of stock that remained in an automated horizontal band saw's cutting area after the initial cut was made. He contacted the cutting portion of the blade during the upward stroke, lacerating his left hand.",1
"An employee was performing maintenance on a chain drive, lubricating it with a rag. The rag became entangled in the chain, drawing the employee's hand into the sprocket. The employee injured four right-hand fingers and was hospitalized.",1
An employee was lifting a bale of trash to place it in the dumpster when he dislocated his left shoulder.,1
"While crimping decking sheets, an employee stepped backwards and fell 14 feet from the first level deck to the concrete below.  The employee fractured the right fibula/tibia.",1
An employee was struck by a passing vehicle while he was unloading merchandise. Both of the employee's lower legs were fractured.,1
An employee operating a steel bending machine received a laceration that resulted in the partial amputation of his right pinky finger,0
An employee's left middle fingertip was amputated while clearing a jam on the clip rail machine.,0
"An employee was using a grinder with a wire brush to remove rust from an ""s"" cam. A wire came loose and flew into his right eye's pupil. He was not wearing eye protection at the time.",1
"An employee tripped, fell, and fractured her hip, requiring surgery.",1
An employee was assembling calendar pages using a commercial paper cutter when the machine cut the employee's left-hand middle and ring fingers. The fingers were amputated.,0
A line cook amputated the tip of his left thumb while chopping broccolini.,0
 A forklift operator clipped a refrigerator while backing up. The refrigerator fell onto an employee who was driving a golf cart in the warehouse resulting in head injuries.,1
"An employee lost his footing and fell off the back of a semi trailer onto a paved road. The employee suffered four broken ribs, a broken scapula and internal bleeding in the lungs.",1
A warehouse employee fell while climbing over a forklift guardrail and broke her knee.,1
A local driver was hospitalized with crushing injuries.,1
"While descending from the back of a flatbed truck, an employee fell to the ground and hit his head.",1
An employee was struck by a bar on the Elliot Packaging Machine while cleaning it. The employee suffered a broken arm.,1
An employee was operating a corrugator when a piece of metal lacerated the employee's arm as it moved forward during the manufacturing process. The employee required surgery.,1
An employee was moving walkboards. The employee slammed a walkboard to clean off excess mortar which caused an outlooker to break. This caused the scaffold to tilt and the employee fell sustaining a neck injury.,1
An employee was moving a tray to a container when the interlocked gate came down unexpectedly and partially amputated the employee's right middle finger.,1
"On or about December 8, 2015, an employee was hospitalized after suffering a back injury while test driving a vehicle on a rough road track.",1
"An employee tripped on a plastic pallet and fell to the floor, fracturing her hip. She required surgery.",1
"An employee was assisting another employee in moving a large plastic spool. As the employee was pushing the spool, a trackhoe that was compacting the dirt backed over the employee's left foot resulting in injury to the left knee.",1
"An employee was inspecting a forklift. During the inspection the hydraulic line ruptured. The employee placed his left hand on the end of the hydraulic line. As the forklift operator engaged the hydraulic line, fluid shot into the employee's middle finger creating an embolism. The employee was transported to the hospital for surgery to remove the hydraulic fluid from his finger.",1
An employee lost balance while walking up the stairs and fell backwards down the stairs. The employee sustained bruises and lacerations and slight bleeding on the brain.,1
"An employee was operating a table saw and severed his left thumb, index and middle fingers.",1
An employee was cleaning the end of an auger when his left middle fingertip was amputated. The auger was not shut off at the time of the incident.,0
"After glazing wood doors, an employee became lightheaded and was hospitalized.",1
"An employee slipped and fell approximately 12 feet down a metal ladder on the side of the building. The employee received severe injuries, including broken ribs, and was hospitalized.",1
An employee was cleaning out bottles that were jammed in the filling machine. Another employee cycled the machine amputating the employee's middle fingertip.,0
An employee was bringing shopping carts to the store when he tripped on the curb and fell resulting in a head injury. He was hospitalized.,1
"An employee was delivering a shipment of freight when a gust of wind blew papers out of his hand. As he went to reach for them, he walked into the edge of the lift gate, injuring his head and right shoulder. He was hospitalized.",1
"An employee was tarring a roof when he slipped and fell approximately 7 feet, suffering a cervical injury.",1
"When an employee opened a trailer door, the freight (a metal excavating bucket) fell out of the trailer onto his right foot, breaking several bones.",1
"An employee was operating a reach truck while moving a pallet with product form one location to another. He lost control of the forklift and struck a stack of pallets with product, causing him to lose his balance and fall. His foot got caught, severely lacerating and crushing his left big toe and second toe. He was hospitalized, and the second toe was amputated.",0
An employee was shampooing the carpet when he stepped on a security tag sensor which penetrated his shoe and punctured his right foot.,1
"On December 7, 2015, an employee received an electrical shock when the steel cables attached to the spider basket in which the employee was working contacted an overhead power line. The employee suffered electrical burns to the right hand and stomach and the amputation of his right arm just below the elbow.",1
"On December 8, 2015, at the back of the store, an employee got stuck between the handle of an electric powered pallet jack and a metal storage rack. He bruised his back, lower chest area, and spleen and was hospitalized.",1
While descending a 10 ft. A-frame ladder an employee's foot got caught between the rungs and the employee fell approximately 8 feet hitting some shelves before hitting the ground and fracturing the left arm.,1
An employee was making adjustments to a belt conveyor and had removed the guard from the chain and sprockets. The conveyor was turned off and the adjustment was made. The employee turned the conveyor on to ensure the adjustment was effective. The employee was demonstrating to another employee what adjustments had been made by pointing to the parts with his left hand when the employee's hand became caught in the chain and sprocket resulting in multiple fractures requiring hospitalization for medical treatment.,1
An employee was cutting pieces of cardboard with a band saw and amputated the right middle finger above the first knuckle.,0
A maintenance worker was using a pneumatic die grinder with a carbide cutting wheel to cut a piece of metal. The cutting wheel got in a bind and broke sending pieces of metal into the right side of the employee's neck and causing a laceration.,1
"On December 8, 2015, an employee working in the First building on line 6 at the fixed extrusion machine smashed his finger between a flange and a pneumatic plunger resulting in the partial amputation of the employee's left index finger.",1
"An employee fell from a 4-foot aluminum step ladder while washing an outside window, fracturing the right ankle.",1
"An employee attempted to clean rice bran from the trunk of a whitening machine. His right hand contacted a rotating blade, amputating 1 inch of his middle finger. The machine was not locked out at the time of the incident.",0
An employee tripped over a customer U-Boat and sustained blunt trauma to the back of his head and pain to his right shoulder.,1
"An employee was installing a ballistic windshield on an armed security vehicle. The employee was working from a ladder, which fell out from under him. The windshield, weighing approximately 60 pounds, fell on top of him and injured his spine.",1
An employee was inserting oranges into a squeezer machine when his right hand got caught inside and was crushed.,1
"On December 9, 2015, at about 8:00 a.m., an employee was struck by a door assembly fixture while installing a wind tower door. He was hospitalized with fractures to the sternum and lumbar area and a shoulder laceration.",1
"An employee was helping a patient in the hyperbaric chamber. The patient started seizing and the employee had to rapidly decompress the chamber, which resulted in the employee suffering an air embolism and decompression illness. The employee was hospitalized.",1
"An employee was attempting to open the top hatch on a sand blasting pot that was pressurized. The pressure from the tank shot the hatch into his face, fracturing it and knocking his teeth out.",1
"A maintenance employee put his gloved hand on a conveyor belt to see if the belt was hot. His hand and arm were pulled into a belt roller, fracturing his forearm. He was hospitalized overnight.",1
An employee stepping from an extension ladder onto a wet metal roof slipped and fell to the concrete below. He suffered a compound fracture to his right wrist.,1
"Two employees operating stand-up reach trucks were rounding a corner at the same time and collided. One employee was traveling with the forks behind him and the other employee was traveling with the forks in front him. The truck traveling with the forks in front struck the other employee in the lower leg, causing a compound fracture to the tibia and crushing the left ankle.",1
"On December 9, 2015, at about 10:28 a.m., an employee was cutting pig's feet on a meat saw when the blade amputated his left index finger above the first knuckle. He had surgery.",1
"An employee was disconnecting the rear trailer of a double-trailer tractor trailer when the trailer moved, pinning  the employee between the trailer and another tractor trailer parked behind it. The employee suffered multiple leg fractures, a knee fracture, multiple rib fractures, and numerous contusions and bruises.",1
"An employee was fielding (visual inspection of telecommunications components) a pole in the rear casement of a home when she tripped over and fell on a vine.  She felt pain in her right arm, right shoulder, and chest.  She was hospitalized overnight with broken ribs.",1
An employee suffered amputation and crushing injuries to his thumbs while operating a metal bending unit. ,1
"An employee was working from a 10-foot step ladder when a bar that holds clothes came loose. She lost her footing and fell 10 feet from the ladder to the concrete floor, breaking vertebrae in her neck and back.",1
"On December 9, 2015, at approximately 0720 hrs., an employee was building a hose using a binding clamp tool when the tool broke and a piece struck his left eye.",0
"An employee was removing a plant from a box truck when he lost his balance and fell, striking his head on the floor of the truck.",1
"While operating a miter saw, an employee's left palm and thumb was cut, resulting in hospitalization.",1
"On December 9, 2015, an employee was using a table saw to cut lumber. As he was making the cut, the board started to rise and kick back. He attempted to control the kickback by pushing down and forward into the saw. His hand was on the trailing end of the board as he pushed, and his right ring finger's first digit was amputated by the saw blade.",0
An employee was operating a hopper when his right index fingertip was pinched  between the hopper and the frame and amputated.,0
An employee installing Christmas lights fell while climbing off the lower level of the roof onto a portable ladder. He was hospitalized with a fractured back vertebra and a dislocated right thumb.,1
A rattlesnake bit an employee's left index finger while the employee was loading pallets.,1
"While pulling equipment, an employee fell to the ground from a gearbox that was approximately 7-feet high, injuring the pelvic area. The employee was not wearing fall protection at the time.",1
An employee's hand was smashed between a dressing wheel and the edge of a table during grinding work. His left ring fingertip was amputated.,0
"An employee was reloading pallets onto a truck and was returning the powered pallet jack to the truck. The employee walked the jack back onto the trailer in the space available on the lift gate. The jack moved to the right, running over the employee's foot and pinning his leg. He lost his balance and fell approximately 3 to 4 feet off the lift gate platform, twisting his right ankle and breaking his right leg below the knee.",1
"An employee slipped and fell while walking down stairs, breaking their hip.",1
An employee was holding forklift forks in the upright position when a fork fell and crushed the employee's finger. One-third of the employee's finger was amputated at the hospital.,0
"On 12/9/2015, at 12:15 a.m., an employee was cleaning a conveyor belt when his left hand got caught under the belt. His left ring finger was amputated just above the lowest/first knuckle.",0
"An employee was using a wood joiner to finish the edge on a piece of wood. When the employee attempted to brush away dust with his gloved hand, the blade amputated his right index fingertip.",0
"An employee was pulling wiring using a 10-foot step ladder. He lost his footing and fell to the ground, losing consciousness for 15 minutes. He was hospitalized with a concussion and minor spinal fractures.",1
An employee was watching maintenance being performed on injection molding machine number seven. The employee fell backwards three feet off the steps on the side of injection molding machine number six and broke ribs and vertebrae.,1
"An employee was helping a second employee remove bolts from a steel plate attached to an axel fixture. One employee was using an air wrench to loosen bolts while the second employee was using a wrench to hold onto the bolt. The first employee loosened the bolt, and the plate slid down and struck the second employee's right index finger, amputating the tip.",0
"While attempting to install a hand line, an employee made contact with an energized power line, receiving second and third degree burns to the left hand. The employee was hospitalized.",1
Three employees were working in a scissor lift. An overhead door opened and knocked the scissor lift over.  One employee was hospitalized with a back injury.,1
"An employee pulled into the yard to pick up some rebar. He thought he placed the pickup truck in park and exited the vehicle, however the truck was in reverse. The door knocked him over and the left front tire ran over his right ankle. He was admitted to the hospital for a broken tibia and fibula.",1
"An employee was picking up debris from the roof of a building. She lifted one of the skylight covers, which was not labeled ""hole,"" and fell through 10 feet. She fractured her right arm and was hospitalized.",1
An employee's right hand was punctured when it was struck by the hydraulic stop while pulling block from a machine.,0
An employee amputated the their left index fingertip while loading a weld fixture into a weld robot cell.,0
"An employee operating a boom lift truck was getting ready to change a light bulb on a pole. The truck tipped over, causing the employee to fall 20 feet to the ground. He suffered broken bones and internal injuries.",1
An employee was cutting brick using an automated saw when his finger went under the saw blade. His right index finger was amputated below the fingernail.,0
An employee was troubleshooting an encapsulation machine and bypassed the safety interlock. The employee's hand was caught in moving parts while troubleshooting resulting in the partial amputation of the left middle finger from the tip to the second joint.,0
"An employee was installing a new security gate with rollers with two other co-workers. As they were moving the gate, the gate fell on the employee resulting in back injuries. He was taken to the hospital where he had surgery.",1
"On December 10, 2015, an employee fell to the floor in the hallway leading to the activity room, sustaining a broken right wrist and broken left hip.",1
An employee fell from a low boy trailer while loading a bulldozer onto the trailer. The employee suffered a head laceration and fractured vertebrae in the neck and upper back.,1
An employee was replacing rusted screws on crypt plates using a hand held screwdriver. The employee was struck in the head by a crypt plate that came loose and fell. The employee suffered head and pinky finger lacerations requiring stitches.,1
An employee was hanging drywall from a scaffold and fell resulting in a head injury.,1
"A forklift driver hit an employee, crushing him between the forklift and a baggage cart.",1
"On December 10, 2015, an employee amputated the right index finger between the second and third knuckle while clearing a jam at the bacon bellies paper cutter.",0
"On December 10, 2015, at approximately 12:05 PM, an employee attempted to clear scrap material from the operating envelope of a die cutting machine.  The machine, which was still energized at the time, cycled and crushed his hand. He required surgery for multiple hand fractures.",1
An employee was getting out of the refuse truck and was struck by a car that ran over his foot.,1
An employee amputated three left-hand fingers while operating a chop saw.,1
An employee injured her wrist when she encountered a group of children participating in physical altercations.,1
"An employee was standing on the back of a highway van trailer, pulling on a pallet with a hook. The hook disconnected from the pallet, causing the employee to fall off the trailer and hit the ground.  He was hospitalized with broken ribs, a punctured lung, and a displaced ribcage.",1
"An employee's hand got caught in a machine press, amputating the right index finger.",0
"On December 10, 2015, at approximately 3:00 PM, an employee was processing/cutting meat in the production room with a meat saw. The employee's hand slipped off and his right index fingertip was amputated.",0
"An employee was applying membrane material to the foundation of a house. Her coworkers were transporting hot waterproofing material product in buckets to the foundation and were throwing the hot product on walls and spreading it with brooms. The product splashed and burned the employee's hands, fingers, face, and neck. She was hospitalized.",1
"On December 10, 2015, at approximately 1:50 AM, a Southern Foods Group, LLC, employee was hospitalized with 2nd degree burns to his left arm, upper chest, and right shoulder after being splashed by hot water from a disconnected hot water line that he thought was empty while he was checking lines and switching circuits.",1
"An employee was moving a fluid pump into the maintenance bay when a work platform fell and struck the employee's right arm, fracturing it.",1
"An employee slipped and fell, striking her right knee on the parking lot surface and requiring hospitalization.",1
An employee fell to the ground and dislocated a hip after accidental contact with another coworker.,1
An employee was hanging dry wall from a 5-ft high scaffold and was found unconscious on the floor with multiple skull fractures by his co-worker who heard the noise from the other side of the wall and came to his aid. The employer assumes the employee was climbing down when the scaffold tipped over and he fell head first onto the concrete floor.,1
An employee fell from a ladder and injured their back. The employee was hospitalized overnight.,1
"On December 10, 2015, at approximately 10:00 p.m., a pizza delivery driver had given pizza to the customer and was standing at the doorway asking for payment. The customer refused payment. An unknown person(s) approached the deliverer from behind and struck his head with a baseball bat. The delivery driver was able to get away and call for assistance. The driver was hospitalized with a skull fracture.",1
An employee suffered a finger amputation (first digit on her left hand index finger) while operating a drill press/reamer. The employee was wearing cotton gloves at the time of the incident.,0
An employee using a small three-step ladder fell and fractured her right ankle. She was hospitalized.,1
A cow carcass fell from the shackle striking the employee on the right leg and fracturing it.,1
An employee climbed a fixed ladder on a conex to install weather instrumentation. The support rung at the top gave way and the employee fell approximately eight feet resulting in a broken left ankle that required surgery and hospitalization.,1
"On December 10, 2015, around 3:15 pm, an employee walked from his work station to a work area where a co-worker was using hot water to wash a tooth roller while it was running. To warm up his hands, the injured employee put his hands under the hot water poured by his co-worker and the moving roller caught his glove, pinching a finger. He was admitted to the hospital for an avulsion injury on the right index finger.",1
An employee was moving a suspended heat exchanger unit during the manufacturing process. The part that was to be placed under the heat exchanger unit (roll of steel mesh) fell on top of the employee's hands resulting in a partial amputation of the right index fingertip above the knuckle.,0
"An employee was moving a two-door storage cabinet. As the cabinet was being lowered on its side, the door closest to the employee swung open and caught his index fingertip in the hinge, partially amputating his fingertip.",0
"An employee in the Planing Area was working at the middle wood profiler. When she reached over to the pallet next to her to pick up an air hose with her left hand, her right sleeve became caught in the wood profiler's cutter head. The employee received lacerations to her right forearm and was hospitalized.",1
An employee experienced an electrical shock while walking in the reformer section of the paper mill.,1
"An employee was standing on an eight foot ladder and fell resulting in a skull fracture above the left eye, a broken left wrist, and a broken nose.",1
"Two employees got into a verbal altercation.  One employee packed up his gear and was leaving the vessel. The employee punched a steel I-beam on his way out, fracturing his right hand.",1
An employee was rigging down a conductor pipe. A pipe swung and struck the employee in the back as it was being hoisted. The employee was hospitalized with a back injury.,1
An employee was walking on strap-on stilts spreading joint compound on newly installed bathroom drywall when he tripped on an exposed pipe on the floor and fell. He was hospitalized with a broken right femur.,1
An employee operating a powered pallet jack injured his left foot/ankle when he struck a parked powered pallet jack.,1
A laborer was cutting down a piece of metal ductwork and cut his forearm. He was admitted to the hospital for stitches and treatment of a 6 inch laceration.,1
"On December 10, 2015, around 7:15 pm, an employee slipped and fell on the floor while performing her duties cleaning the kitchen and washing dishes. The employee broke an ankle and was admitted to the hospital.",1
A temporary employee was operating an electric pallet jack and struck a rack system support. The employee was hospitalized.,1
An employee was working on a machine and smashed three fingers inside the machine resulting in the amputation of the left ring fingertip.,0
An employee was at the edge of the vault observing work inside the vault when he passed out and fell 8 feet down into the vault. He landed on a water pipe resulting in a broken mid-back.,1
A maintenance technician was preparing to work on a maturation tank valve. When he opened the valve a caustic chemical splashed him in the face.  The employee suffered burns to his eyes and the left side of his face and neck.,1
An employee was welding a trailer fender.  The tire burst and debris struck the welding mask causing a facial laceration and temporary vision impairment. The injured employee was hospitalized.,1
"On December 11, 2015, at approximately 6:20pm, an employee amputated the left middle fingertip while operating the trimmer.",0
The employee was removing panels from a roof during building demolition. He stepped on a weak section of the fiberglass roof and fell through breaking his femur.,1
An employee was dismantling a vehicle on a lift. The vehicle fell and crushed the employee. The employee was hospitalized for a broken ankle and hip contusion.,1
The injured employee was walking toward the restroom and hit his shoulder on the door frame causing him to lose balance and fall to the floor.  He was hospitalized for a left hip fracture.,1
An employee suffered a fingertip amputation while operating a pallet jack.,1
An employee fell from an A frame ladder and injured the left leg and hip.,1
An employee fell approximately 20 feet from a scaffold while climbing down resulting in a lower extremities fracture and hospitalization for medical treatment.,1
A driver was walking around his truck to look at the scales and get the weight when he slipped and fell.  A slimy product with moisture was on the floor.  The employee broke his lower right tibia.,1
"On December 11, 2015 at approximately 11:00 AM, a staffing worker was asked by the host company to get on the roof to help take off fiberglass panels. The employee stepped on a weak spot and fell through twelve feet breaking his right femur and sustaining other injuries to his spine and ribs.",1
An employee was making a bed in the guest room. The sheet ripped and the employee fell breaking the right hip.,1
An employee was guiding an eight foot piece of aluminum railing through the 3-axis angle machine when his glove got caught on the rollers that pulls in the aluminum piece crushing his hand. His left ring finger was amputated at the first joint.,0
An employee operating the KM16 5 head saw suffered a partial amputation of his right foot.,0
"While moving a cart off the line, the rack swung back and pinched the tip of the employee's right hand middle finger between the rack and the rolling cart resulting in amputation.",0
"On December 12, 2015, at approximately 12:45 am, an employee was washing a paving machine with a water hose. The employee moved in close to wash behind the auger that was slowly spinning. The auger caught the employee's vest pulling him into the machine and turning him onto his back. At that time, another employee was able to shut off the machine. The employee suffered a dislocated left hip, a left knee strain and a left arm abrasion.",1
"An employee walking to their car was startled by another employee, lost their balance and fell fracturing their hip.",1
"A ski patrol employee was checking a run prior to opening. He hit a rock, and tumbled into other rocks, breaking his tibia and fibula.",1
An employee was on ski patrol on a run and struck a rock under the snow fracturing the right leg.,1
An employee was drawing blood from a patient when she felt a pop in her back as she stood up.,1
An employee was uncoiling chain and got their fingers caught between the sprocket and chain resulting in the amputation of the right index and middle fingers.,0
An employee was bitten on the right hand by a dog while delivering mail.,1
An employee tripped and fell to the floor fracturing the left hip.,1
An employee suffered the amputation of the left index fingertip while troubleshooting a packaging machine.,0
"An employee was working in the graphite mixing department. The mixing process creates one pound graphite mix balls. Once the mixing process was completed, the employee dumped the contents of the mixer into a stainless steel box. One of the mix balls landed on the edge of the stainless steel box. The employee reached for the mix ball to throw it into the box. As the employee reached for the mix ball, he lost his balance and pinched his finger between the mix ball and the edge of the stainless steel box.  The employee suffered the amputation of the left middle fingertip as a result of the incident.",0
An employee amputated her right middle fingertip while operating the card spinning machine.,0
An employee was cutting a block of cheese and the knife slipped and punctured the employee's abdomen.,1
An employee stocking product fell to the floor while coming down an A-frame ladder and broke the right leg requiring surgery.,1
"An employee was seriously burned while working at a fracking fluid recycling facility, requiring hospitalization.",1
An employee amputated the left ring fingertip when it was caught in a roller inside the unguarded housing of a pump.,0
"While moving packages on a load chute, an employee's finger got caught between the metal release mechanism, amputating the right middle fingertip.",0
An employee was clearing a wrap-up when her hand got caught between two rollers as she was re-threading the web. She partially amputated three left-hand fingers.,1
"On December 13, 2015, a portable rack fell on an employee's left-hand little finger as the employee attempted to move it, amputating the fingertip.",0
An employee amputated three fingers on his left hand while working with a plate roller machine in the Sheet Metal Department.,0
"An employee was working independently underneath a trailer in the yard to repair a lift axle that was jammed. While the axle was rising slowly, he held onto the safety chain. When the arm had enough pressure to release itself from under the axle where it was jammed, the axle shot up, tightening the chain to the axle and amputating three of his right-hand fingers.",0
"While walking in the crosswalk from the parking lot to the building, an employee was struck by a feeder shifter (powered industrial vehicle), fracturing his leg.",1
An employee was operating a grommet machine when her right index finger went into the path of the punch press and was smashed.,1
"On December 14, 2015, an employee was delivering mail. While moving the mail around in her vehicle, a package fell out and she tripped over it. She fell to the ground and broke her left wrist.",1
An employee was slicing a tomato near a 90-degree belt on a conveyor line when her hand got caught underneath the belt. Her left pinky finger was amputated below the nailbed.,0
"After cleaning a process kettle with methanol and water, an employee emptied the tank and filled it with phenol.  The employee then began to remove the plug and was splashed with phenol, suffering chemical burns to the right thigh, stomach, and face.",1
An employee was unloading a palette or shipping crate with a coworker. The coworker dropped the crate and it struck the injured employee's finger. His middle finger was medically amputated.,0
"While attempting to straighten the paper he was feeding into the stacker hopper of a machine, an employee's right hand got caught in the rollers, crushing his fingers.",0
An employee's finger was amputated while operating a cookie wrapping machine.,0
An employee was operating a vertical milling machine when his glove got caught between a part and a drill bit. His left thumb tip was amputated.,1
An employee was moving a breader into position for a production run when the breader fell off the tracks and the hopper created a pinch point that amputated the employee's left pinky fingertip.,0
"An employee was making sand cores on a core machine when the gas plate cracked. While he was adjusting the ram to align the gas plate, the ram moved downward and contacted his foot, amputating his fourth toe.",0
"While an employee was climbing into a fork truck, he reached for the grab handle and it broke off.  He fell 4 feet, landed on his tailbone, and suffered a vertebral compression fracture.",1
"While stepping off a 6-inch step in the shop, an employee slipped and broke his left hip, requiring surgery.",1
An employee was loading a plane on the ramp with carry-on luggage from the jet bridge when he felt a pop and pain in his stomach area. He was hospitalized for a possible hernia.,1
"An employee was using an overhead crane to lift a 6-inch OD piece of round stock weighing approximately 617 pounds. He reached underneath the load to place a 1-foot block of wood when the load shifted and released from the rigging, landing on his hand. His left index finger was partially amputated to the knuckle.",1
An employee amputated his right hand while feeding lumber into a notcher machine. The machine was unguarded at the time.,0
"While driving a yard truck, an employee became ill from the vehicle's carbon monoxide exhaust and was hospitalized.",1
"An employee was in the dock area speaking with a Towmotor operator when he got pinched between two Towmotors, injuring his right lower leg. He was hospitalized.",1
"An employee was stabilizing a mortar tub that weighed approximately 75 to 100 pounds on a forklift. The load began to swing in a circular motion and pushed the employee toward the front right-side wheel. The forklift then rolled onto the employee's right leg, breaking the right femur.",1
An employee was operating a table saw when his right middle finger was amputated. The saw was unguarded at the time.,1
"While operating a fork truck, an employee was struck by a forklift, suffering a pelvic injury and requiring hospitalization.",1
An employee's hand got caught between a rotating table and a stationary table. Her right index fingertip was amputated.,0
"An employee was moving product using a two-wheeled hand truck when the hand truck and the boxes of material fell back and struck the employee. The cart handle fell on the employee's right thigh, causing a contusion.",1
"An employee was moving product from the back of one trailer to another trailer when the vehicle began to move. The employee attempted to move from the stationary trailer to the moving trailer but fell off, fracturing his right tibia/fibula.",1
"An employee was training on a new piece of equipment (stretcher). When she lifted one end of it, she hurt her back falling to the ground and passing out. She was hospitalized with a back injury.",1
An employee fell through a skylight while roofing.,1
"An employee was doing maintenance on an electrical transformer when he contacted energized equipment, suffering third degree burns on his left hand.",1
"An employee was helping a sign hanger unbuckle a sign from a crane truck when the sign fell off and hit the employee on the head, causing head trauma.",1
"An employee was sanding the rollers on a 3-axis rail bender. The rollers caught the employee's left hand and pulled it into the machine while a piece of aluminum was going through it, crushing his fingertips.",1
An employee's finger was crushed by machinery when it was inserted into an unguarded hole. The employee was admitted with a broken finger.,1
"An employee and a coworker were guiding an electrical cabinet carried by a forklift into a storage unit. They noticed the electrical cabinet was too tall for the storage unit, so they repositioned the electrical cabinet to its side. While moving the repositioned electrical cabinet, a backboard on the pallet broke, allowing the cabinet to fall. The injured employee tried to catch the electrical cabinet, fracturing his right leg.",1
"An employee was using a pry bar to unjam a cage when a nearby forklift operator dumped a full chicken cage. The full cage slid and struck the employee, causing a pelvic injury.",1
An employee's finger was scraped on a cart that was being moved and became infected.,1
An employee cut their right little finger with a circular saw.,1
"An employee was loosening a bolt from a cylinder in the plastic injection molding machine. When he attempted to grab a hand jack, the plate came down because the bolt was loosened, and the employee's right hand was pinched between two metal plates. When he pulled his hand out, his pinky finger got lacerated and required surgery.",1
"An employee was changing a link in a chain on a set of rollers when a pallet of finished product was pushed onto the roller set being worked on. This caused the sprocket to move on the chain, pulling the employee's left index finger in and amputating it to the middle knuckle.",1
"An employee was delivering food on his bicycle when he was assaulted at approximately 11 a.m. He sustained multiple injuries, including a collapsed lung and concussion.",1
An employee was operating a Towmotor and backed into a wall. His foot got stuck between the Towmotor and the wall and required surgery.,1
An employee got out of his truck to chain up when he slipped and fell on the icy road surface. He struck his head and back on the road surface and was hospitalized.,1
"An employee was loading cars and looking for packages left behind. As he reached into the running equipment his right arm was caught in the pulley and belt, fracturing it. The equipment was not guarded at the time.",1
An employee amputated the left ring finger while setting up a machine.,0
An employee was operating a break machine and got his left index finger caught in the machine resulting in laceration and fracture.,1
"An employee was climbing the fixed ladder on the back of a ready mix truck when they slipped and fell off, landing on their chest.",1
An employee received a compound fracture injury to the middle three fingers of his left hand when the forklift he was changing a tire on slipped from the jack. The employee's hand was caught between the bumper and the tire.,1
An employee suffered a head injury when he slipped on a customer's porch and fell.,1
"An employee was performing preventative maintenance on piece of conveyor. He reached across and lifted up on the belt.  His back elbow crossed the photo eye, activating the belt.  His finger was caught between the end of the conveyor and the end guard.  When he pulled his hand back, he degloved the right ring finger resulting in medical amputation.",0
An employee was operating an electric pallet jack to pull orders. The employee backed into a parked forklift that was behind a divider curtain and broke their right leg.,1
An employee was working on the flap gates of a crate. A flap came down and amputated the right ring fingertip.,0
An employee's right index fingertip was amputated when a load of 2x4s was placed onto a trailer with a forklift and the load crushed the employee's finger.,1
An employee was injured while conducting snow surveys. He was ejected from a snowmobile and sustained a back and neck injury.,1
An employee slipped and fell on snow and ice resulting in a broken left ankle and hospitalization.,1
A forklift operator ran into a parked forklift. The employee's left hand was caught between the two forklifts resulting in a broken hand. He was admitted to the hospital for surgery.,1
An employee fell down the stairs from a walkway to the parking lot en route to their personal vehicle at the end of the work shift.,1
An employee slipped on a piece of tape and fell approximately 11 feet from the roof resulting in two broken ribs and a fractured scapula.,1
"An employee was descending from a ladder when he slipped and fell to the ground injuring his forehead, elbow, right hand and knee.",1
"On December 14, 2015, at approximately 4:00 PM EST, an employee was in the meat cooler retrieving chicken product to put out in the display case when he slipped, falling to the floor and hitting his head. He was admitted to the hospital for swelling and bleeding in the brain.",1
"An employee fell approximately 20 feet from the roof of a two story building. The employee's fall arrest system was not hooked to the safety line at the time. As a result of the fall, the employee suffered three broken ribs and a broken right hand.",1
"An employee was sandblasting pipe at the Rice Energy Compressor Station. The sandblaster slipped out of employee's hands, hit the pipe and struck the employee's upper right arm.",1
An employee crushed a finger between two scrap iron parts on a tray resulting in amputation at the hospital.,0
"On 12/15/15 at approximately 1:00 PM, an employee operating Rounder Machine #150 was in the process of feeding a 2"" x 1/2"" piece of copper stock material and inadvertently actuated the mechanism resulting in a partial amputation to the right index finger.",1
"On or about December 15, 2015 at 3:10p.m., a mail handler got her right foot caught in some unsecured netting on a parcel container and twisted her foot resulting in a fracture.",1
An employee was hospitalized with a concussion after falling down a flight of stairs.,1
An employee was cleaning debris and moving ladders when the employee tripped and fell breaking a wrist and a hip or pelvis.,1
Two workers were lifting an 80 lbs. shear ram block onto the shear.  The block shifted and pinched a worker's right thumb fracturing it.,1
"On or about December 15, 2015 an employee was injured when his hand became caught in the binding machine while unjamming it.",1
"An employee was plowing snow. As he exited the pickup truck, he slipped and fell hitting his head on the ground resulting in a concussion.",1
An employee fell and broke her hip resulting in a hospitalization. ,1
An employee was walking in a patient's house and struck her right toe on an uneven threshold resulting in a laceration.,1
"While removing rotten decking from a roof, an employee fell about 30 feet through the decking. The injured employee was hospitalized with broken ribs and a collapsed lung.",1
A bus person was carrying a big box of cereal after restocking the counter and started to walk away. She hit the corner to the salad bar and fell to the floor. She was hospitalized for an injury to her left hip.,1
An employee's hand was caught in a metal pipe bending machine resulting in a broken and dislocated left little finger.  The left ring finger was crushed.,1
An employee lifted a hatch door by hand and was attempting place the door over the hatch opening when it slipped from his hands and his right ring finger was pinched between the hatch door and the hatch opening.  The right ring finger was amputated.,0
An employee lost control of a forklift and hit a rack resulting in a punctured kidney and head trauma.,1
"An employee was stacking parts on the turn table. While the table was rotating, the parts fell off the table and struck the employee's left leg fracturing it.",1
"On December 16, 2015, at approximately 2:52p.m., an employee was hospitalized after receiving burns to his neck, ears, head, and hands.  The employee was preparing to unload a coal tar pitch railcar.  The line on the railcar was opened without relieving pressure and material sprayed onto the worker.",1
An employee was unloading a cart from a plane and fell less than six feet striking his head on the ground. The cart also fell onto the employee injuring his ankle.,1
"An employee was cleaning the battery condenser between catwalks while standing on one of the machine's discharge side, between a catwalk and a 45 degree slide. The employee slid down the battery condenser slide (45 degree angle) and fell into the cotton press. The press was not running at the time of the incident. The employee sustained lacerations to the back of the head, fracture lumbar vertebrae and a collapsed lung.",1
An employee's right index finger and knuckle were fractured after his glove got caught in a conveyor.,1
An employee fell out of a rolling office chair onto a cement floor breaking his hip and lacerating his head.,1
An employee was attempting to clear a jam at the lumber mill and caught his finger between a board and a roller resulting in the amputation of the left index fingertip.,0
Two employees working from a man-lift received an electrical shock.,1
An employee was hospitalized after getting his hand caught in a printer.,1
A letter carrier was delivering mail to a residence when she fell down the front steps and fractured the left ankle.,1
An employee was cutting a carrot with a knife and amputated the tip of his left thumb.,0
An employee bent down to pick an item up and felt a pop in her lower back. She was not able to stand back up.,1
An employee amputated his left finger while using a table saw. The saw blade guard was removed at the time.,1
An employee's ring finger was amputated on or about 12/16/15 at approximately 3:45pm.,0
"An employee was setting up the table saw to perform dado cuts on a door. The material kicked back and the employee's right hand was pulled into the blade. The employee was hospitalized for surgery on his index finger, middle finger, and thumb.",1
An employee fell from a deck through a gap in the railing.,1
An employee was troubleshooting an upper and lower flask of a mold trying to get the upper flask to seat on the lower flask properly. The flasks came together and crushed the employee's hands.,1
An employee was making patties using a Patty-O-Matic patty forming machine and amputated the tips of the left ring and middle fingers.,0
An employee was operating a cut-off saw and the wheel of the cut-off saw exploded and kicked back injuring the worker.  The worker was hospitalized with a deep laceration to the chest and a chipped collarbone.,1
An employee cleaning the x-ray conveyor in the Bakery Department got her arm caught between the roller and the belt breaking her arm in two places.,1
"On or about 12/16/15, an employee was opening the gate for a semi truck to leave the area.  The semi trailer's rear bumper with the hazmat sign got hooked on the gate.  The gate broke loose from the hinges and went flying 10 feet in the air landing on the employee. The employee was hospitalized with fractured ribs, a potential hole in the lung, and a facial laceration.",1
An employee was cleaning glue rails on a packaging machine. Another worker was troubleshooting the packaging machine where suction cups grab the paperboard boxes. This worker jogged the machine to see if the suction cups were grabbing the paperboard sheets and the employee who was cleaning glue off of the rails suffered an arm injury requiring surgery.,1
"On 12/16/15, an employee's hand was caught-in the roller of a dough rolling machine while the employee was attempting to clean the machine with a rag. The rag was caught-in the moving roller and pulled the employee's hand into the machine.  The employee was  admitted to the hospital with a severe hand injury and is awaiting surgery.",1
An employee was jogging the bolt header machine and amputated the right index finger to the second joint.,1
An employee slipped on ice while walking to work from the parking lot and broke her left ankle. The employee was admitted to the hospital.,1
An employee was operating a manual hydraulic pallet jack to elevate and relocate a storage cabinet. A plastic storage bin fell from the cabinet and struck the employee breaking the left leg.,1
An employee was walking in between aisles and caught her foot on the corner of a table. She fell on her right arm and the right side of her face. She experienced bruising and abrasions to the right side of her face. She was hospitalized for a fractured right arm above the elbow that required surgery.,1
An employee suffered a head injury after tripping and falling and hitting their head on a work surface.,1
"A stack of 6""x 6"" x 20' timbers were banded together and sitting on the ground. The stack was about three to four feet high. An employee cut the bands off of the stack and four of the timbers fell striking the employee in the left leg and fracturing it just above the ankle.",1
"An employee was operating a stacker. While trying to clear a jam, their right thumb was crushed in the stacker.",0
An employee was operating the bone cannon machine and amputated part of the right index finger.,0
"On December 17, 2015, an employee was operating the table saw and amputated the top segment of the left thumb.",0
An employee was cleaning hot rollers on a running machine. The rollers caught and pulled his hand into the machine.  The employee was hospitalized with burns to the top part of his left hand.,1
An employee was painting poinsettias and slipped on plastic sheets on the floor. He fell and hit his head on a metal table. He was unconscious for an hour and hospitalized.,1
An employee was installing low voltage wires and received a shock. He fell from a six foot step ladder resulting in broken ribs and a collapsed lung.,1
An employee slipped on a sloped hill at the worksite and fell onto a protruding sapling suffering a puncture wound to his right backside. The employee was hospitalized.,1
An employee was cleaning the rollers of the tri-laminator machine from the intake side.  Both of the employee's forearms were pulled into the machine. The employee was hospitalized for injuries to both arms.,1
"On or about December 17, 2015, an employee amputated the left middle finger at the first joint when the finger was caught between the 14"" X 36"" log and the conveyor belt.",0
A lineman in a bucket truck was removing a dead insulator. Something hanging down from the basket contacted a live line below. The employee suffered electrical burns to the hands and thighs.,1
An employee was hospitalized after suffering injuries to both arms while operating a milling machine.,1
An employee got his left hand caught in the winder and suffered a compound fracture to the left hand.,1
"While stepping onto a trailer, an employee lost his balance, fell, and hit his head on the ground resulting in hospitalization for head and rib injuries.",1
A Line Mechanic was adjusting the film on a machine that makes plastic bags. The fingers of his left hand were pulled into the rollers resulting in the amputation of the left middle finger.,0
"On December 17, 2015, at approximately 9:00 AM, an employee was empting a bag of recyclable material into a grinding machine when the bag became lodged into the equipment. The employee tried to free the bag from the equipment and he was pulled into the equipment. The employee suffered broken bones and damage to his skin on the right wrist and left arm.",1
An employee climbed up onto a storage rack to retrieve an item and fell approximately eight feet to the ground below. The employee was hospitalized with a concussion.,1
An employee was hospitalized for a serious hand injury requiring surgery while operating a five axis CNC machine.,1
An employee broke a leg during athletic training when they impacted another person.,1
An employee suffered a broken leg that will require surgery after being struck by another skier on the Springmeier ski run.,1
An employee was moving a desk with a co-worker and aggravated a preexisting hernia. The employee was admitted to the hospital on 12/18/15.,1
An employee was cutting meat and sliced their left thumb on the saw blade. A partial amputation was required to treat the wound.,0
An employee was using a hand-held blower to clean when his thumb was partially amputated by the impeller on the bottom of the equipment. The impeller was unguarded at the time.,0
A rural carrier operating a POV to delivery mail suffered a partial amputation to the right hand middle finger after slamming the car door on the right hand.,1
"An employee was cleaning a plastic mold with alcohol. He pulled a lighter from his pocket to melt some of the plastic from the mold.  When he struck the lighter, his hand caught on fire.  The employee tried to put out the flames on his pants and caught them on fire. The employee was hospitalized with first and second degree burns to his stomach, leg, left hand and nose.",1
An employee was loading a flatbed trailer with a forklift. The employee climbed on top of the trailer and fell approximately six feet and fractured his hip.,1
"The employee was working with another employee to set up a new operator valve system. While observing the operation of the valve system, one of the employees placed his hand into the opening of the plates and the plates closed onto his fingers.  The employee's index and middle fingers were amputated. There was no guard on the machine at the time.",0
An employee's right ring finger was amputated while working on a machine.,0
The employee was unloading a pallet to make a box using the mechanical rollback storage rack. The pallet got stuck and the employee attempted to dislodge the pallet with a rod/pole.  The employee lost his footing and fell. The employee's left pinky finger was smashed by the falling pallet.,0
An employee accidentally shot himself in the right thigh with a pneumatic nail gun and was hospitalized.,1
A ski instructor fell while skiing and broke her tibia.,1
An employee was cleaning the injector lid. The lid came down on top of the employee's hand amputating the left index finger.,0
An employee was opening the garage door to the warehouse to pick up materials.  The employee tripped over the rope to the garage door and fell.  He was hospitalized with a concussion.,1
"On 12/18/15 at approximately 9:30am, two employees were offloading pre-cast concrete stairs off of a truck with a link belt crane at a new commercial construction project. As they unloaded the third piece, one of the employees was using both hands to guide the piece to the ground. The suspended stair came into contact with a stair on the ground. As the pieces came together, the employee's left middle finger was pinched between the concrete stairs. A partial fingertip amputation may have occurred.",0
"An employee was operating a MAC-MR6 truck with a 1997 Putzmeister BSF32.16H 32 Meter Concrete Pump. The pump clogged. The employee was fixing the clog, when suddenly the pump shot concrete out striking the employee in the face and chest.  The employee was thrown a distance of approximately 16 meters. The employee was hospitalized for treatment of his injuries.",1
An employee was attempting to place a large dog into a kennel when she lost her balance and fell to the floor. The employee fractured her right ankle in two locations resulting in admission to the hospital for surgery.,1
An employee was checking the wire on strander machine #265. The wire was stranding onto a bobbin and somehow his finger got under the wire. The tip of his left middle finger was amputated to the first joint.,0
An employee had an asthmatic reaction caused by another person's strong cologne.,1
An employee was changing an air filter in the cabin of an aircraft.  The employee cleaned dust off the fan blades and amputated the left hand ring and middle fingertips on the fan blades.,0
An employee was cutting a vehicle's windshield at the customer's home when the cold knife slipped and punctured his right forearm. The employee was admitted to the hospital for treatment.,1
An employee was washing a process line that had a phosphate blockage. The chemical splattered and burned the employee's legs.,1
"An employee suffered second and third degree burns to the chest, right arm, torso, and right foot when struck by hot water from the Jensen Vat Dryer machine.  A short in the conduit caused the dryer door to open and spray the hot water.",1
"Employees were dismantling a system scaffold 20 feet in the air. When one of the employees removed a gravity pin that was holding a coupling pin for a scaffold leg, the leg released and fell 20 feet below striking another employee on the right arm above the elbow and on his right middle finger. The employee was hospitalized with a puncture wound above the elbow and a broken right finger.",1
An employee was inspecting welds on a scaffold and fell 6.5 feet resulting in a broken leg. Fall protection was worn at the time of the incident.,1
"An employee was mopping a stairwell when she missed a step and fell down the stairs resulting in a fractured left arm, bruised eye, bruised face, and a concussion.",1
An employee was hospitalized for a broken hip when he was struck by a passing forklift that was carrying pallets.,1
An employee sustained a back injury while lifting materials. He was hospitalized.,1
An employee was getting out of his delivery truck and slipped resulting in injuries to both knees that required surgery.,1
An employee operating a 20 inch masonry saw to cut cinder block amputated his left thumb when the saw kicked back.,0
"An employee was helping another employee adjust the perforator machine. As the employee ran product through the machine, their left pinky finger was amputated. The guard was not in place at the time.",0
An employee was getting up from a chair. Her legs got tangled up with a sweater and she fell on the floor fracturing the right hip.,1
An employee was driving a fork truck and struck a section of the concrete floor that was raised about 1/4 inch. The sudden stop caused a neck injury.,1
An employee was pushing a food cart and caught her right pinky finger between the corner of the car and the wall resulting in a fingertip amputation.,0
Workers were moving Jersey barriers. An employee suffered a broken lower left leg and a broken right foot when the backhoe ran over his leg.,1
"An employee delivering mail tripped and fell, breaking his hip.",1
An employee was packing donuts when a break in the line occurred. The employee tried to correct the problem and amputated the right middle fingertip.,0
An employee lacerated the right hand while cleaning a manual cutter.,1
Employees were prepping a vessel for painting. The employees were using a pressure washer and working from a scissor lift.  Another employee who was moving in a scissor lift became entangled in the pressure washer line. The line was tied off to the lift with the employees who were pressure washing. That lift tipped over and fell onto a third scissor lift.  The employee suffered a dislocated tibia.,1
An employee was working from a scaffold. The employee fell seven feet. The employee's harness was unhooked at the time of the incident.,1
An employee was walking on the tarmac to pick up an orange cone when he slipped on ice and fell injuring his head.,1
An employee was attempting to connect alligator clips to a battery inside of a welding machine. The machine was running and the fan severely lacerated his right index and middle fingers. The index finger was also dislocated.,1
A worker was cleaning the chain of a tenter frame machine. A second worker was jogging the machine for the first worker. The first worker's right hand was caught in the machine resulting in the amputation of the index fingertip.,0
"The employee was walking in front of the CIP discharge when it discharged hot, caustic water. The flow knocked her to the ground. She sustained burns to the left side of her thigh, foot, and lower leg.",1
An employee was walking from the sales department to the bakery department when she tripped and fell resulting in a right hip fracture.,1
An employee climbed a ladder to perform cleaning duties and fell. The employee was admitted to the hospital.,1
"On December 20, 2015 at approximately 12:54, while an employee oiled the chain that drives the power turn conveyor to the SSM, part of her right hand index and middle fingers were severed when they were caught between the chain and sprocket.",1
A temporary employee was working at a knock-out station lifting castings.  He complained of chest pains and was hospitalized.  He was diagnosed with muscle strain.,1
"A employee was stabbed in the back, neck, head and leg by another employee.",1
"An employee was carrying rivet bars, dropped one, tripped over it, and then fell face-first into wooden shelves.  The employee sustained a fractured nose, teeth, and possible fractured neck.",1
There was a fire inside a patient's room.  An employee suffered smoke inhalation while removing another employee from the room.,1
"The employee reached over a safeguard to push a coil towards the wrapping machine.  While pushing, he triggered the proximity switch for the seal bar to come down.  The seal bar came down on top of his hand, which was between the seal bar and the coil.  The safety device, which makes the seal bar retract when it makes contact with an object, failed.  The seal bar remained in the lowered position.  The employee tried to pull his left hand out of the equipment resulting in the amputation of the middle fingertip.",0
"On December 20, 2015, at approximately 3:30 pm, an employee was performing operation duties inside the CFB unit when Boiler #2 failed, releasing hot steam and burning the employee.",1
An employee was carrying a small folding table and tripped and fell on her hip.,1
An employee was installing u-verse equipment in a customer's home. When he stood up he felt a pop in his back. He was hospitalized for a pinched nerve.,1
An employee was operating an unguarded table saw and amputated three fingertips on the left hand.,1
"An employee fell approximately 30 feet through an elevator shaft after unhooking his self-retracting lifeline to readjust a laser resulting in fractured ribs, pelvis and a punctured lung.",1
An employee was troubleshooting a machine and amputated three fingers.,1
"On or about December 22, 2015, an employee amputated a fingertip while fixing a conveyor.",0
An employee caught a finger on a sling and fractured it resulting in hospitalization.,1
"An employee was attempting to free up some stuck boxes along the conveyor line.  The employee was pulling on some stuck boxes when his hands slipped off the box he was lifting. He fell to the side and stopped his fall with his right hand. During that process, his right hand was caught between two rollers. In freeing his hand, he pulled the skin off the top of his hand.  He was hospitalized.",1
An employee was walking on a loading dock and fell off the dock to the concrete floor below resulting in a broken right femur and a laceration to the left side of his of head.  The employee was admitted to the hospital.,1
"An employee was unloading freight (gun safe) at the dock. It became unstable on the pallet and tipped over, falling on the employee's left foot and fracturing it.  The employee was hospitalized for  surgery on the left foot.",1
"The employee working as a machinist in Building 211 received a metal sliver in his right index finger on December 21, 2015, that he removed. The employee was later admitted into the hospital.",1
"On Monday, December 21, 2015, at approximately 2:30 p.m., an employee slipped and fell down the stairs after delivering mail.  The employee was hospitalized with four broken ribs.",1
A chipper operator was using an air hose to clean the shaker screen. The employee's left thumb got caught in the belt and pulley drive amputating it to the first knuckle.,0
An employee fell through a floor opening on the second floor that had been covered with fiberboard. The employee was hospitalized with broken ribs and lacerations.,1
"An employee was the last person on the roof after installing solar panels and wiring and had removed his fall protection equipment handing it to a coworker.  The coworker went down the ladder to the ground and held the ladder.  When the injured employee went to descend the ladder, he slid and a strap securing the ladder to the roof broke. He fell over 20 feet from the roof to a concrete surface below resulting in compound fractures to his left arm.",1
An employee was setting up and cycling a GIMA 26 machine in the casting department and amputated the right index finger.,1
The employee was carrying a box when he lost his grip and his right middle finger was pinched requiring partial amputation of the finger at the hospital.,1
"On December 21, 2015 at 1:30am an employee was operating the nut welder and amputated her right index finger.",0
An employee was gassing up his company vehicle at the private fueling station on company property when the company owner drove by and struck the employee causing a broken leg.,1
"An employee was setting the axle into the axle bracket. The employee used his hands to unjam the axle from the axle bracket. When the axle came free, the employee's middle fingertip was amputated between the axle and the axle bracket.",0
A worker suffered a thumb tip amputation while cleaning a batch mixer.,0
"An employee was working in Department 24 at the ""B"" line boxing station.  Welding rods were moving on the indexing cooling conveyor that carries them from the furnace.  The employee was assisting the movement of the rods along the conveyor with his left hand when his right thumb was caught in a pinch point in the conveyor resulting in a fingertip amputation.",0
An employee was exposed to a struck-by hazard from an tugger that was not properly secured resulting in a hospitalization.,1
One employee fell three feet from a ladder while installing sheetrock and suffered a compound fracture to his right ankle.,1
The employee was opening the gate to load cows into the holding areas of the facility. The employee was closing the gate when a cow kicked the gate closed  catching the employee's finger in a pinch point. The employee's left index finger was amputated.,0
An employee was doing maintenance work on a cylinder from a platform approximately six feet in height using a ladder. The employee fell and broke his left leg.,1
"An employee was in the process of tightening belts on an electric motor on a pump jack and was caught between the arm and the base of the motor experiencing a fractured pelvis, abrasions to left side of the abdomen, and abrasions to the buttocks.",1
An employee amputated a ring finger and crushed two other fingers while operating a brake press.,1
An employee was hospitalized after being struck by a rigid steel tremie pipe that fell from the boom of a concrete pump truck. The employee suffered a broken foot and a broken finger.,1
An employee using a sledgehammer to break up concrete struck his knee. The employee was later hospitalized for an infection.,1
"An employee was dry fitting a door (making sure all of the pieces fit together before gluing and nailing) and clamped her index, middle, and ring fingers in the horizontal clamp.",1
An employee lost more than half of his right index finger and severed another finger while cleaning the breader machine while it was cycling.,0
"On or about 12/22/2015, an employee's fingertip was amputated when the lift cart he was operating caught his finger between a shelf and the cart.",0
An employee fell off the back of a delivery truck and broke his hip.,1
An employee was walking in the company parking lot and was struck by another employee driving their car out of the parking lot. The injured employee suffered a fractured hip and broken leg bones.,1
An employee tripped and fell. His leg was then run over by a forklift breaking it.,1
"An employee was mopping floors in a kitchen, slipped, fell, and broke his arm.",1
An employee's leg was injured from slipping in the mud. The employee was hospitalized.,1
An employee was moving a pedestal fan and during movement the cage flexed and the employee's finger contacted the blade amputating a portion of the finger. Amputation occurred on the fleshy part of the finger opposite the nail bed with no bone loss.,0
"An employee went to step on an ergonomic stand-alone platform and slipped.  The platform is approximately 6"" from the ground.  The employee was hospitalized for injuries to his hip.",1
An employee was operating a pallet jack and caught his right foot between the pallet jack and a storage rack.,1
"On or about December 22, 2015, an employee received a right hand and finger injury while trying to unjam a Doughboy tray maker machine.",1
"An employee was working at a coil winder, winding reactor coil and got their left hand caught in the machine between the plate and feed wire.",1
An employee was looking for parts while walking and talking on the radio.  The employee tripped on a safety barrier and broke the left leg above the ankle.,1
At an oil and gas well drilling site the injured employee was standing on the well bore cover while a forklift was attempting to pick up the well bore cover.  The employee fell and fractured the right fibula and lacerated the right side of the head.,1
An employee tripped and fell and was hospitalized for a shoulder injury.,1
An employee was smoothing round stock using emery paper on a lathe. The employee's gloves were caught in the machine resulting in the amputation of the left index finger.,1
An employee was waterproofing and fell approximately 15 feet through a hole resulting in a broken back.,1
An employee was sanding a metal part on a lathe. The employee's arm got caught in the lathe and fractured.,1
An employee was moving steel product on a metal table when the table tipped over and the product fell off and struck the employee's right foot.,1
An employee was shot during an attempted robbery inside Roosevelt Field Mall.,1
An employee working with a circular saw cutting lumber cut his wrist.,1
An employee fell from a ladder resulting in injury to the right side of his head.,1
An employee fell six feet from a ladder being used to perform electrical installation work and fractured vertebrae.,1
"The ""perforator operator"" employee was working behind the ""P1"" machine that applies plastic film wrap onto food product containers. The employee lifted the shield to make an adjustment while the machine was running and caught her left hand between two rollers. A portion of the ring finger on her left hand was amputated.  No interlocks are used on this portion of the machine.",1
"An employee was struck by a moving passenger vehicle while crossing the street. The employee was in transport from the new car sales showroom to the used car sales showroom located directly across the street. The employee sustained two broken legs, a broken pelvis, fractured vertebrae, eight broken ribs and a concussion as a result of the incident.",1
A temporary employee fell from a two-step ladder and broke his lower leg.,1
"An employee was operating the auto-bagger machine when her left middle finger entered the point of operation, amputating her fingertip.",0
An employee was cleaning rollers on a geoliner machine that rolls plastic sheets together. He bypassed a light curtain guard and was cleaning the rollers with the machine turned on.  His hand was caught between the roller and the right index and middle fingers were crushed. The employee was hospitalized for surgery.,1
An employee was operating a CNC machine. An aluminum piece from the CNC machine became a projectile and struck the employee's chest resulting in a laceration.,1
An employee was seriously injured when a vehicle slipped off of an automotive lift while the employee was working underneath it.,0
Employee was stepping onto the roof from the ladder and slipped off the roof onto the ground fracturing his right heel.,1
An employee operating an electric hand cart struck a concrete wall catching his right ring finger between the cart handle and the wall resulting in a fingertip amputation.,0
An employee was flipping on the circuit breaker to the AC unit and received a flash burn to the left hand.,1
An employee working on a blow mold machine suffered a fingertip amputation.,0
A USPS employee was struck by a car while crossing a street on foot. The employee suffered a fractured wrist and knee.,1
An employee was using the manually operated (non-powered) plate bender to bend a plate when a part of the plate bender that he was holding (~20 inches long) slipped out of his hand and fell onto his left index finger causing a fingertip amputation.,0
An employee was attempting to replace a belt on a conveyor system and suffered a partial amputation to the left thumb.,0
An iron worker was installing a skillet valve. The employee's right hand became lodged between two pipes near the valve and he suffered a partial amputation of his right thumb.,0
An employee was loading boxes onto a pallet and was struck on the ankles by another pallet jack.,1
An employee operating the mandrel extruder lost her arm.  She was admitted to the hospital for surgery.,1
An employee was performing maintenance on the HVAC system. He lifted a piece of ventilation duct and hurt his back.,1
"An employee working in a restaurant was traveling from the kitchen to the dinning room, slipped on a wet floor, and fell injuring her pelvis.",1
"An employee climbed onto a trash trailer and was moving materials around when he fell sideways, catching himself with his hand and cutting his thumb on metal. The employee was hospitalized for surgery to repair the cut tendon.",1
An employee was loading pallets onto a truck. The pallet hooks shifted and pinched the employee's finger between the pallet and the hook resulting in a partial amputation of the right middle fingertip.,0
An employee was vacuuming a car.  A second car behind the car the employee was vacuuming rolled over the employee's leg and fractured it.,1
An employee was removing a 1/2 keg of beer from the truck when it fell on his foot and fractured two toes.,1
A temporary employee was loading a truck full of pipes. The load became unstable and a pipe rolled off of the truck and onto the temporary worker's legs.  The worker was hospitalized and his left foot was amputated.,0
An employee was injured when he slipped on ice in the parking lot.  He was taken to the hospital where he remained overnight for observation. He was treated with four staples.,1
The employee was driving down the street and was cut off by another vehicle.  The employee placed his left hand in the door jam.  The driver side door slammed shut and broke the employee's left ring and pinky fingers.  The employee was hospitalized for surgery.,1
"On December 24, 2015, an employee was delivering a package at a residence. When the homeowner opened the door, a dog bolted out and bit the employee's left hand.  The employee was later admitted for treatment of an infection.",1
A letter carrier slipped and fell on ice fracturing the left hip.,1
An employee in the Grooming Department received a hair splinter in the hand that became infected and required surgery and hospitalization.,1
"An employee was walking between a trailer and a tractor. The tractor driver was unaware of the employee and backed up to connect to the trailer. The employee was pinned between the tractor and trailer resulting in fractured ribs, a fractured jaw, and a fractured shoulder.",1
An employee was making a delivery at a restaurant location. Product in back of the semi-trailer shifted and fell against the load-lock. The employee released the load-lock to adjust the product. The product fell onto the employee knocking him to the ground. Product and the load-lock fell onto the employee.  The fall was approximately 30 feet from the back of the semi-trailer.  The employee sustained a fractured right eardrum and bleeding in the brain.,1
"An employee tripped and fell, hitting her head.  The employee was hospitalized.",1
"A band saw was locked out and the blade was replaced. Then the employee unlocked it, turned it on, and reached for the hose (to wash it down) with his left hand and his right index finger came in contact with the blade and was amputated.",0
An employee was turning a piece of bar stock on the CNC lathe when it malfunctioned and the bar stock struck the employee's right arm and shoulder causing severe lacerations.,1
"An employee was bringing in clothing from the trailer outside into the backroom. She was about to climb an A-frame ladder when her feet slipped and she fell sideways, landing on her arm.",1
An employee was cutting plywood with a table saw and cut his left ring finger.  The employee was hospitalized for surgery.,1
"An employee was speaking to a supervisor outside of the supervisor's car. Another employee went to move a gas powered tug.  The tug went in reverse instead of forward, pinning the employee's leg between the tug and the supervisor's car resulting in injury.",1
An employee was moving an LP gas tank to be used on a forklift when he lost his balance and fell from a 3-1/2 foot platform to the ground fracturing his right knee.,1
"An employee was loading hay on a hay trailer. Ten bales are set on each side of the trailer. When a jack is cranked, pins come up to hold the hay in place.  When you crank the jack again, it unloads the hay. The employee went to air up a flat tire. When the tractor was moved, the hay on the left side fell on and crushed the employee.",1
A ski instructor was conducting a private ski lesson and struck an unidentified object under the snow. She fell sustaining a broken sternum and whiplash. She was admitted to the hospital.,1
An employee was carrying curtains into the house to be installed and had an allergic reaction (hives and respiratory issues) to a fire proofing chemical used on the curtains.,1
An employee was loading empty pallets into a trailer using an electric pallet jack. The pallets were stacked too high to fit into the trailer door and they struck the top of the trailer. The pallets fell onto the employee's hand resulting in broken bones and a laceration to the left arm.  The employee was hospitalized for surgery.,1
"On December 26, 2015, an employee was in the box section of the Post Office, tripped over some boxes on the floor, and fell fracturing a hip.",1
An employee was operating the hamburger pattie making machine and amputated the tips of the left hand middle and ring fingers with no bone loss. The machine was unguarded at the time.,0
"On or about December 26, 2015, at 12:40 pm and employee was pushing a two-yard trailer can dumpster up to the back of the garbage truck when the front caster wheel of the dumpster seized up and twisted sideways pitching the dumpster forward and pinching the tip of the his right ring finger between the dumpster's trunnion bar and the truck.  He was transported to the hospital where the tip of his right ring finger was amputated and repaired.",0
An employee adding wood to a boiler was severely burned on the arm and hospitalized.,1
An employee fell approximately three feet from a step ladder that was in the closed position and leaning against the water tank and struck a containment basin. The employee sustained broken ribs and was hospitalized.,1
The employee was lowering a dumpster to the ground when the metal dumpster lid closed on his finger resulting in the amputation of the middle fingertip.,0
An employee had the tip of his right middle finger pinched between the tongue of the lavatory cart and the tow hitch on the rear of the tow tug. The employee was hospitalized for surgery.,1
"After delivering mail to various businesses, a city carrier assistant (CCA) was walking through a shared parking lot to the delivery truck when the CCA slipped on snow covered ice and fell.  The CCA suffered a fractured right pelvis resulting in hospitalization.",1
An employee was working from a 20 foot extension ladder to apply bird repellant underneath of a store awning when he fell backwards approximately 15 feet and landed on his back. The fall caused a fracture to his spine in the mid to lower lumbar region.,1
"A Ski Instructor was instructing a group of students down the trail.  He caught an edge of his ski, and went into the woods, where he fell and fractured his ribs, two vertebrae, his elbow (which will require surgery), and possibly his hip.  He also had puncture wounds on his thigh from the sticks/branches.",1
An employee was mopping in a patient's room when the door started to close. The employee attempted to prevent the door from closing and slipped in the process. The employee sustained a hairline fracture to the head of the femur.,1
An employee was working on a small platform with grating approximately one foot above a subfloor when a 2 inch by 2 inch section of grating came loose and fell. This caused the employee to trip and his leg contacted the now exposed grating which sliced his right calf.,1
An employee was unscrewing a 90 foot vertical pipe weighing 1000 lbs. from the rigging. The pipe came loose and fell onto the employee's right foot. The employee was hospitalized for treatment and the right little toe was amputated.,1
An employee was cutting turkey meat and got juice on the sole of his right foot.  The employee was later hospitalized for surgery on the infected foot.,1
"An employee climbed over a counter top and fell, fracturing the right knee.",1
A fingertip on the employee's left hand was amputated while operating an embroidery machine.  The employee's finger was caught between a bar on the machine and the clamp.,0
An employee was walking down the steps and missed half the step causing her to slip and fall breaking her right ankle. She was hospitalized for surgery.,1
"An employee was sorting mail at an indoor facility. She stepped into an open sided cardboard box to retrieve a parcel, tripped when she stepped out of the box, and fell breaking the right hip.  She was hospitalized for surgery.",1
An employee exiting a bucket truck lost his footing on the last step and fell to the ground fracturing his left leg.,1
"An employee was standing in between two rolls. When a machine started up, the employee was crushed between the rotating rolls resulting in a damaged spleen.",1
An employee was moving and pulling packages from the conveyor when his right hand was caught in the conveyor. His right ring fingertip was degloved.,0
An employee fell injuring his ribs. He was hospitalized.,1
"An employee was walking down a wet grassy incline towards the parking lot, slipped, and fell fracturing the left ankle.",1
"An employee was standing on an A-frame ladder preparing to install a heating unit within a garage and fell, fracturing an ankle that required hospitalization.",1
"An employee was setting a truck to begin work trimming trees.  As the employee walked around the truck to place a wheel chock, a dog came out from under the carport of a home and bit the employee's right forearm. The employee was treated and released. He was later admitted to the hospital for an infection.",1
An employee was injured when he was pulled into a coal conveyor belt system. He was taken to the hospital and treated for a broken hip.,1
An employee's leg was amputated by a tractor-mower when it rolled over.,1
An employee was standing on the Tier 2 catwalk on the port/in shore side and slipped and fell through an open manhole.,1
An employee was working from a semi-trailer repositioning a load of steel using an overhead crane. The employee lost his balance and accidently pushed the crane's handheld controls which in turn shifted the load of steel and pinched the injured employee's leg between the steel load and the trailer wall. His right leg was broken.,1
An employee slipped on ice and snow while walking to his personal car in the company parking lot resulting in a broken right femur.,1
An employee slipped on ice in the parking lot and fractured his hip.,1
An employee was coming out the restroom when he was struck by a moving forklift. His foot was injured during the incident which required immediate hospitalization for treatment. His left big toe was surgically amputated.,1
"An employee reported feeling light headed and proceeded to lower the bucket.  He then detached his harness and stepped out of the bucket, which was still elevated. The fall resulted in a broken pelvis.",1
An employee was changing a tire on a forklift. The tire exploded injuring the employee's right hand and resulting in the medical amputation of the right index finger.,0
An employee was installing electrical conduit using an extension ladder.  He fell about 14 feet and broke his left ankle.,1
"On or about 12/28/15, a maintenance employee slipped and fell on the ice while making rounds on the property.  The employee suffered a broken right hip and was admitted to the hospital.",1
An employee had multiple strokes which doctors determined were from shoveling snow from a sidewalk a few days prior.,1
"An employee was walking across the truck parking lot and was struck by a moving truck resulting in broken ribs, internal injuries, cuts and abrasions.",1
"While moving a strainer onto a rack for cleaning, the rack slipped and pinched the employee's finger between the rack and the strainer weighing approximately 40 lbs. The fingertip was amputated.",0
"On 12/28/15, an employee was putting oil into a motor on top of a railcar about 20 feet in the air.  The employee's right arm was caught in a pulley attached to the motor breaking three fingers. He was hospitalized for surgery.",1
"On December 28, 2015 at 21:45 an employee shut down a production machine to clear a jam. The employee's left thumb was in a pinch point when a spring released pinching the employee's thumb and causing an avulsion and broken bone. The tip of the thumb was later partially amputated.",1
An employee was in the boom lift cleaning when he got caught between a bar joist and the lift causing damage to his liver.,1
"An employee was walking from the building to the employee parking lot, slipped on ice, and fell breaking an ankle.",1
An employee climbed atop the asphalt drum in an attempt to clear recycled asphalt from the chute and fell 12-15 ft. to the ground. The employee was knocked unconscious and possibly broke a leg.,1
"An employee was unloading snow blowers off a trailer when he tripped and fell backwards onto the concrete sidewalk hitting his head, left shoulder and back.",1
An employee had three fingers on the right hand crushed when the glove that the employee was wearing got caught in a gear.  Part of one finger had to be surgically amputated.,0
An employee slipped on ice and snow in the company parking lot and fell breaking their femur. The employee was hospitalized for surgery.,1
"An employee was loading materials onto a flatbed trailer. He slipped and fell off the trailer, fracturing his lower back.",1
An employee was getting ready to serve food to children. The cook opened the oven and was hit by a fireball from a damaged gas line.,1
An employee was struck by a vehicle in the parking lot while walking into work resulting in a lower left leg fracture.,1
"An operator was packing out powders from the bottom spout on a ribbon blender.  The gate valve on the spout became clogged.  The employee reached into the spout while the blender was running resulting in the amputation of their left middle, ring and index fingers.",0
An employee was troubleshooting the box taping machine. The employee's hand was caught in the chain drive resulting in the amputation of the left thumb's distal joint. The machine was not locked out at the time.,0
An employee was carrying a hose as part of nightly cleaning. The employee was walking backwards and tripped over a power cord.  Her finger went into a pipe that leads to a breading pump.  The pump was running and severed her right index finger just below the nail.,1
"An employee was relocating the skidder digger.  While turning around, the vehicle was half on, half off the blacktop.  The right side of the skidder sunk into the soft dirt and it started to tip over.  The employee was pinned under the skidder cage. The employee sustained lacerations to the left ear and eye and a left shoulder injury. The employee was not wearing a seat belt at the time.",1
An employee was changing a bag on a spice grinder machine. The bag fell into the machine. The employee attempted to grab it and amputated a fingertip on the right hand when it came in contact with the grinder.,1
An employee was changing a trailer tire. A tire came off the rim and the employee broke their left leg.,1
"Maintenance employees were working on the leg quarter conveyor belt.  They made and placed a steel bracket/guide above a chain like belt where it made a 20-30 degree bend around a corner to prevent the belt from popping off.  While the belt was running, the injured employee saw there was a rough edge on top of the bracket/guide, so the employee reached to feel the top of the bracket/guide and his hand was pinched between the belt and the guide.  His left thumb was amputated above the knuckle.",0
An employee was walking to the mail box and tripped over a curb falling and breaking a wrist that required surgery.,1
An employee slipped on the ice and fell fracturing the left hip.,1
An employee fell off an extension ladder while cleaning fascia. He fell an unknown height and sustained fractured ribs and lacerations.,1
An employee was pushing a tote while restocking the aisle. She tripped over the tote and fell. She was admitted to the hospital for a fractured right hip.,1
An employee was cutting cores with a radial chop saw and amputated the tips of the left index and middle fingers.,0
"An employee was placing a part into a sizing press. While the employee's hand was in the point of operation, the tooling engaged and pinched the employee's right index finger between the tool and die. The employee suffered an amputation of the right index finger as a result of the incident. The light curtains installed on the press were bypassed at the time of the incident.",0
"An employee was delivering newspapers to residents, slipped in the wet grass, and fell breaking her ankle.  The employee was hospitalized.",1
An employee was working on a derrick about 10 feet off the ground and was being lifted to disconnect the elevator. A wire rope under tension snapped back striking the employee and throwing him in the air and then back down. The employee was wearing a safety harness and he only fell the length of his lanyard or about 4 feet. The employee injured his back and was hospitalized.,1
An employee was hospitalized after slipping on ice and falling at the front entrance. The employee fractured a hip.,1
"An employee tripped over a wheelchair, fell, and fractured her hip.",1
A mechanic was repairing a heater in a Bobcat skid steer loader. The employee was in the cab and the door closed on the employee's finger removing a piece of tissue from the left ring finger.,0
An employee was walking in the parking lot to their vehicle when the employee slipped on snow and ice and fell breaking the left ankle.,1
An employee slipped on ice in the parking lot and fell. The employee was subsequently hospitalized.,1
An employee walking downstairs slipped and fell fracturing the right arm.,1
An employee fell approximately 10 feet down an elevator shaft after using a tool to pry the elevator doors open.  The employee's left ankle was shattered.,1
An employee was walking through the parking garage when she slipped on a patch of ice and fell breaking her left hip.,1
An employee was delivering mail when he slipped on ice and fell striking his head and shoulder on the pavement.  The employee was disoriented and could not answer basic questions. The employee was hospitalized.,1
An employee amputated the right index fingertip while operating a hydraulic press brake.,0
"An employee was pulling ash off of an ash truck with a clam rake and fell, suffering  a leg injury. The employee was hospitalized for surgery on a torn muscle in the right knee.",1
"An electrician leaned an unopened, 8-foot A-frame ladder against a wall.  He climbed the unopened ladder, over reached, lost his balance, and fell. 
He was treated for four hairline fractures to his vertebrae.",1
"While the company was installing Google Fiber Optic cable on the public road, a vehicle ran through the traffic cones and struck an employee. The employee was hospitalized with a broken leg.",1
Employee A was filling a cardboard baler when Employee B turned on the baler.  The hydraulic drive door caught employee A's left arm and amputated it below the elbow.,0
An employee was unjamming a rolling piece of equipment. When it became free it smashed his finger between the rolling equipment and another piece of equipment. The employee went to the hospital and 3/4 of the right hand ring fingertip was amputated.,0
A worker slipped on the icy exterior stairs and fell breaking a leg.,1
An employee was operating a gravel crushing conveyor belt. The employee attempted to dislodge stuck material from the return roller under the conveyor belt and the employee's arm was caught in the conveyor belt resulting in friction burns.,1
"On or about December 30, 2015, the employee was working on the plastic extruder on the production floor. The employee's right index finger was amputated after being caught in the machine while flushing the extruder. The guard was not in place at the time.",0
An employee used a MIG welder on a caddy. The flammable vapor inside ignited and burned the employee's right arm and hand.,1
An employee slipped on ice in the parking lot and hit his head. He was hospitalized.,1
An employee placed a sheet metal pipe for an HVAC duct into a roll former.  His left index finger was caught between the sheet metal pipe and the die when the roller's foot pedal was actuated. The employee's left index fingertip was partially amputated.,0
Employees were installing a smoke filtration system. The pieces were stored outside and became covered with snow. Employees used a forklift to bring the pieces inside the building. They tipped the forks on the truck downward to clear the snow off of the pieces to bring in. The pipe extension came loose and fell onto an employee's head causing a subdural bleed in the brain.,1
An employee was cutting hoses with a utility knife. The knife slipped and cut his finger resulting in hospitalization.,1
An employee was pulling a V-belt. The motor engaged and his right ring and pinky fingers were amputated.,0
"On or about December 30, 2015, an employee's finger was caught between the die and the die bed as the employee was rotating the die in a brake press.  The right middle finger was pinched, removing the flesh part of the finger.",0
Four employees were riding on an ATV when the ATV rolled over. One of the employee's right leg was pinned under the ATV and severely lacerated. The employee was hospitalized.,1
An employee was injected with a poultry vaccine that caused a blockage of blood flow to his finger.,1
"Four Treco, Inc. employees were cleaning tank bottoms at a facility. During the course of bolting a man way cover onto the tank opening with hand tools, an unknown ignition source caused two of the tanks to ignite. One employee suffered second and third degree burns to his face.",1
"An employee was exiting an airplane, slipped on ice, and fell resulting in a broken ankle that required hospitalization.",1
An employee was working the foot popper machine on the kill floor and amputated a fingertip on the left hand.,0
An employee was operating a fork truck and emptying a trash container. His hand was smashed and part of a finger was amputated.,0
An employee was spackling drywall on a rolling scaffold. The scaffold rolled into a hole that was covered by carpet and the employee fell approximately six feet breaking his arm and wrist.,1
An employee fell from a ladder and injured their back.,1
"On December 31, 2015, an employee working as a produce clerk slipped on a piece of fruit and fell to the ground, resulting in a hospitalization for a compound fracture to the right knee.",1
An employee fell while walking on the ice and broke their pelvis and femur.,1
An employee was severely injured and hospitalized after she fell from the top of a load of industrial fans inside the back of a semi-trailer.  The fan fell onto the employee. The employee suffered a T12-L2 back injury requiring a two-level fusion.,1
"An employee slipped on ice and snow in the parking lot and fell, fracturing the left hip.",1
An employee had just finished installing the last of the drip edge flashing on the roof of a two-story 6:12 pitched new house. He unhooked his lanyard from the anchor point in order to go down the ladder. He slipped and fell 20 feet onto the sand resulting in a lower back injury and broken ribs.,1
An employee lacerated the tip of the left middle finger while using a fillet cutter.,1
An employee was removing snow from the roof of one story house and fell to the ground. The employee sustained a skull fracture and injured his spleen and shoulder.,1
An employee using a grease gun was injured when the hose of the gun ruptured and shot grease into his skin.,1
"On December 31, 2015, an employee slipped and fell on ice after making a delivery at a business and shattered his right ankle in three places.",1
An employee smashed his finger at a job site while helping to hook up a job trailer to a pickup.,0
An employee fell 12 feet while climbing a ladder to gain access to a scaffold work platform.  The employee was hospitalized due to multiple fractures.,1
"An employee was unloading food items from a truck using a hand truck.  When the ramp broke, the employee slipped and fell to the ground injuring their chin and breaking the right ankle.",1
"An employee was working from a scissor lift while removing a section of form work from the ceiling. Meanwhile, another section of form work came down and fractured his left leg.",1
An employee was cleaning on top of the picker when he closed the door on his finger.  The middle ring fingertip was removed.,0
"An employee was putting dishes away in the kitchen of the Spruce Saddle Lodge. He opened a drawer at ground level and later tripped over it, fracturing his left upper leg and requiring hospitalization.",1
An employee cut his fingertip while cutting meat with a knife.,0
"An employee was welding a piece of metal (mid-rail) on a platform near a moving conveyor. While he was attempting to get his tools, the tip of his left-hand thumb got caught between the sprocket and chain on the conveyor. When he removed his glove, the tip of his left-hand thumb was amputated. He was hospitalized overnight.",1
"An employee was setting pipes on the ground and working on pipe support. The ground fell out, causing the pipes to slip and crush the employee's right leg.",1
An employee was driving a reach forklift in the cooler when hit a yellow pole and fell onto concrete pavement. He lost three teeth and suffered a large knot on his head.,1
"On January 1, 2016, an employee was vaccinating baby chicks with a vaccine that contains mineral oil when the vaccine was unintentionally injected into her left wrist. She suffered an allergic reaction and was hospitalized for an infection.",1
An employee working on a 12 foot ladder harvesting grapefruit was struck by a forklift and knocked to the ground.  The employee was hospitalized.,1
"On or about January 1, 2016, an employee's left index finger was partially amputated when the employee attempted to clear some stray tablets from the packaging line.",0
"While trying to get a piece of lint out of a lint cleaner, an employee amputated the last digits on the right pinky, ring, and middle fingers.",0
"An employee was pumping water into a trailer piping system when his finger contacted the plunger, amputating his fingertip.",0
An employee fell from a step stool. The employee sustained multiple fractured ribs and a punctured lung. The employee was admitted to the hospital for treatment.,1
"An employee tripped on a cable ramp and fell to the floor, fracturing her right elbow and wrist.",1
"When an employee arrived at the feed yard, the cattle rushed on the gate and ran over the employee, fracturing the employee's right elbow and left thumb.",1
An employee doing maintenance on a machine suffered a contusion on the top of his left foot when an outrigger was set on it.,1
"An employee was compacting rock on a roller when the roller suddenly caught fire. The employee's shirt got stuck with the shifter and she suffered burns to her right arm, cheek, forehead, and the tip of her nose. She was hospitalized.",1
"While installing cable at a residence, an employee slipped on ice while walking on the concrete sidewalk to his work truck. He broke his right ankle and had surgery.",1
An assailant robbed and struck an employee in the head with a wooden stick while the employee was taking trash to the dumpster outside of the church being cleaned.,1
"An employee was kneeling on a stool and fell forward, resulting in a broken femur and hospitalization.",1
"As an employee was dismounting a forklift, a coworker approached with a motorized pallet jack. The coworker did not stop in time and struck the employee on the right leg. The employee was hospitalized for a broken bone above the right ankle.",1
An employee suffered a chemical exposure to his face and was hospitalized.,1
"On January 3, 2016, an employee was using a manual pallet jack. The forks were not completely under the pallet being towed. When the employee tugged on the pallet jack, the brakes went on and the employee fell to the ground. She suffered a contusion to her right hip and was hospitalized.",1
"While trying to prevent a patient from falling off the operating table, an employee strained/sprained their lower back.",1
"An employee backed into a customer in the check-out line, causing her to trip and fall to the floor. She broke her hip and required surgery.",1
"An employee was standing on a forklift-mounted platform to move sheets of drywall into a second-story window. The forklift tipped forward, causing the employee to fall approximately 16 feet and suffer a broken coccyx.",1
A large portion of an employee's hand was amputated in a grain auger when a coworker bumped or jogged the auger while the employee was cleaning it out.,0
"A maintenance employee was performing maintenance on a cutter machine, replacing the drive gear and motor belt. As the employee was adjusting the belt, the machine cycled and rotated the flywheel.  Two bolts on the side of the flywheel caught the employee's right hand, crushing and lacerating the index fingertip and damaging the middle fingernail. The right index fingertip was surgically amputated just below the fingernail.",1
An employee working on the roof of a three-story building fell and fractured his humerus and hips.,1
"An employee was repairing the hydraulic line on a bucket truck when the line ruptured. His face was splashed with hydraulic fluid, resulting in facial burns and hospitalization.",1
"An employee was repositioning a saw used for cutting strips when he suffered a flap laceration to his left little finger, requiring hospitalization. The saw was still running at the time.",1
"An employee tripped over her shoe lace and fell while walking away from her desk, breaking her leg.",1
"An employee was working on a mechanical power press when the machine cycled and closed on his left hand, crushing his third, fourth, and fifth fingers.",1
"An employee was working on the rooftop exhaust unit. When the employee removed the top case of the unit, the belt began spinning and partially amputated the employee's right index finger.",1
"An employee was servicing a cross-cut box when he began to feel pain in his head and shoulders.  He fell to the ground and became disoriented, requiring hospitalization.",1
"A maintenance employee was working on a transfer auger when the auger crushed his right leg, resulting in hospitalization.",1
An employee slipped on a wet floor and fractured his ankle.,1
"An employee was operating a stand-up forklift when he ran into a guard railing. He struck and injured his knee, requiring hospitalization.",1
"An employee was operating a hot stamp brander when a coworker accidentally moved toward the activation paddles, bringing the clamp down. The employee's second, right-hand fingertip was amputated.",1
"An employee tripped and fell while carrying a cake, fracturing her left femur.",1
"An employee delivered plywood to a project site and was walking away on the opposite side of panels boards being installed when he fell to the ground unresponsive. He was hospitalized with external and internal head trauma from a bullet-nail, which pierced his skull and was embedded in his head. A ricochet may have occurred through the panel boards being installed, causing the nail to strike the employee.",1
"Employees were loading chickens onto a trailer when the wooden platform they were working from collapsed, causing them to approximately 10 feet to the floor below. One employee was hospitalized with six fractured ribs and a head laceration, which required sutures.",1
"On or about January 4, 2016, an employee was working from a cherry picker when he lost his balance and fell 17 feet. He fractured his wrist and face and lacerated his left eyebrow.",1
"On January 4, 2016, an employee slipped on a piece of ice in the parking lot and broke the right tibia. The employee had surgery.",1
"An employee was flicking chicken material off of his hands when his right index finger got caught between a gap in a cone and a chain link on a track. When he pulled his hand back, his right index fingertip was partially amputated.",0
"An employee was rolling a pipe when his glove got caught underneath it, smashing his right index finger. The finger was eventually amputated down to the first knuckle.",1
"An employee was attempting to retrieve a piece of wood that got stuck in the conveyor when her right hand got caught in the belt, amputating her right index finger.",1
An employee was snowboarding down the mountain when the edge of his snowboard caught the snow and he fell on his right side. He fractured his collarbone and wrist on the right side and was hospitalized overnight.,1
An employee was climbing a ladder on the front side of a house when the ladder fell over. The employee suffered spine and neck injuries.,1
"While using a screw gun, an employee tweaked his back and had to be hospitalized.",1
"An employee was repositioning a stop on the leg of an egg washer and was lifting the washer with straps around it. The straps dropped a little, and his finger went through the gusset and leg.  His finger was forced through this small opening, crushing it and requiring overnight hospitalization.",1
"An employee ran into a counter and fell to the floor on her right side, fracturing her hip.",1
An employee was hospitalized with leg injuries after slipping on liquid on the floor of the children's restroom.,1
An employee was moving a bar (a hitch) attached to a cart when the employee's right index fingertip was crushed between the bar and cart.,1
An employee was moving a large air compressor that was in front of the metal recycle bin behind the store. The air compressor moved faster than anticipated and smashed the employee's left ring finger between the compressor and recycle bin. The finger was surgically amputated.,0
"An employee was loading chickens from a chicken farm onto transportation trucks. The employee was pulling a full cart of chickens down the aisle inside the chicken house. As the cart rolled over a section of the steel grating floor, the section became dislodged and fell. The employee and cart fell approximately 10 feet through the hole to the ground.  The employee suffered a broken left hand and required surgery.",1
"An employee was descending a ladder after inspecting roof damage at a residence when he fell approximately 8 feet to the ground, breaking his elbow and foot.",1
An employee was operating a stand-up forklift when the forklift stopped suddenly and flung the employee off backwards. The employee was hospitalized with a fractured left hip.,1
"An employee was carrying product down a flight of stairs when he tripped and fell, hurting his knees and elbows.",1
"An employee was walking in the parking lot when she slipped on ice and fell, striking her head on the pavement. She suffered a skull contusion.",1
An employee's left-hand index fingertip was amputated while running machines.,1
"An employee was cutting the blower section of an air unit out. As he was cutting the blower, a section that he was cutting fell off of the frame, which caused the blower wheel to fall to the floor. It landed on his right boot and cut through the steel reinforcement, damaging two of his middle toe tips.",1
An employee walking down a waxed hallway floor had a severe asthma attack triggered by the wax odor and was hospitalized.,1
An employee was operating a press welder when two of his fingers got caught in the press. His right-hand index and middle fingers were amputated at the first joint.,0
An employee slipped and fell while cleaning the batter conveyor with a green scrubbing pad. His right index finger got caught in and was partially amputated by a sprocket on the conveyor belt drive train.,0
"On 1/5/2016, at approximately 7:30 p.m., an employee was rinsing out a pump as part of the changeover process. The pump is left on while this is being done. The pump got jammed with sprinkles, so the employee attempted to clear it. His right index fingertip was amputated down to the first knuckle.",0
An employee was struck in the forehead by a ratchet chain binder handle.,1
"An employee was working in a house and fell off a ladder, suffering shoulder and ankle pain.",1
An employee was climbing a ladder to access and repair a piece of air compressor equipment when the ladder kicked off and came in contact with the structural surface. The employee suffered three non-displaced rib fractures and contusions.,1
"Four employees were setting up a suspended scaffold. Three employees were on a level above. The injured employee was standing on a lower level, receiving materials from the employees working above. The employee stepped backwards and fell approximately 8 to 10 feet, breaking multiple back bones.",1
"An employee was working on a building rooftop when he fell, breaking his neck and partially paralyzing his legs and left arm.",1
An employee was unloading a slab of granite from a truck bed when wind caught the slab and pushed it into the employee. He fell off the truck bed and injured his left heel.,1
"An employee was walking in a tank farm area when he slipped into an open hole in soft ground, which contained water that was heated by an exposed steam pipe. He was exposed to the heated water on both of his legs, burning one leg up to the knee and the other leg up to the mid-thigh.",1
An employee was observing the testing of a locomotive intercooler when he was struck by a 10-inch steel plate in the abdominal area. The steel cap broke loose from the coupling at 35 psi and shot out 9 feet striking employee in the abdominal area.,1
An employee was installing a floor joist on the deck when he fell 10 feet through the joist to the ground below. He hit and injured his backside and was hospitalized.,1
"An employee was guiding clients on an ice climb when he was hit by falling ice, which caused him to fall. His fall was arrested by his climbing equipment, but he struck against the ice and sustained broken ribs, which punctured a lung.",1
"An employee was walking into the building when he slipped and fell on ice, fracturing his right upper leg and hip.",1
"An employee was stepping away from his tool box, tripped on a wire cable, and fell to the floor breaking his right hip.",1
An employee was walking from the kitchen to the dining area when he missed a 6-inch high unmarked step. He sustained torn knee ligaments and a head injury.,1
"An employee connecting structural steel fell approximately 17 feet, suffering a broken pelvis.",1
"An employee was coming down an 8-foot extension ladder when he misplaced his descending foot and it entered the space between the rungs.  As his leg went through the empty space, it came into contact with the ground, twisting him around and down the ladder. He dislocated his knee joint and broke his tibia.",1
"An employee was operating the wire-forming machine when the wire got hung up on the end of the machine. The employee pushed the wire to the machine's form, which amputated his right index fingertip.",0
"An employee was de-rimming a tire using a tire-mounting machine. While he was pushing the bead breaker bar, his hand slipped and got caught between the rim and the breaker bar, amputating his right ring fingertip.",0
"An employee was preparing to conduct preventative maintenance activities on an HVAC unit on the roof of the building. He took the front panel off the unit. He slipped/lost his footing, causing his hand to enter the unit and get caught in the desiccant belt wheel.  His left index fingertip was amputated.",0
"An employee was hospitalized with burns to his legs, arms, face, and body after the propane line he was connecting in a residential home exploded.",1
"An employee was bitten by a recluse spider on January 6, 2016, while at a conference. She was hospitalized.",1
An employee was cleaning a dough sheeter when the employee's hand got caught between the in-running nip point of two rolling drums on the machine. The employee's hand was crushed and a fingertip was amputated.,0
"On January 6, 2016, an employee was operating a cold header machine when a mobile welding cart became entangled with the coil wire being fed into the machine. The employee accidentally grabbed the wire, which began to advance in speed, and the employee's hand was pulled into the draw box. The employee's right ring finger was amputated.",0
"An employee was attempting to lift a metal grate off of a burn table for cleaning purposes. Using a two-hook chain sling, the employee used one of the hooks with the other being left to dangle. The other hook got caught under the frame of the burn table. When the employee went to lift the grate, the hook that was unknowingly caught came free, flying across and striking the employee in the face. The employee suffered contusions to the face, nose, left cheek, and right forehead.",1
An employee was observing a supervisor during training on the production floor when the employee's left arm got entangled in the conveyer drive shaft.,1
"An employee was trying to open a glass crate. The weight of the glass gave in and fell on top of him, fracturing his right leg.",1
"An employee was grabbing 2-inch by 20-foot lengths of copper pipe from the back of a tractor trailer. The employee put the pipe on their shoulder while standing on the lift gate at ground level, then tripped on the lift gate handle and fell to the ground. The employee sustained a head laceration and broken leg.",1
"An employee was driving a forklift to take excess liquid concrete to an area where it is poured into 2x2x6 forms for retaining wall blocks. The liquid concrete was being poured into a bucket, which the forklift was lifting above the forms, when the employee exited the forklift to either move or manipulate the bucket. The bucket slipped off the forklift onto his person, pinning him to the ground and causing body trauma.",1
"An employee was closing the tops on grain transport railcars. As he was closing the cover, a broken part of the walkway began to ""flex,"" causing the employee to lose his balance and fall approximately 12 feet to the ground. He was hospitalized with a concussion.",1
"An employee was operating the can draw press when he noticed that the transfer had malfunctioned. While he was adjusting the trigger eye, his hand was on the equipment. The machine cycled after he made the adjustment, pinching his hand between the machine and the moving press transfer. His right middle fingertip was amputated.",0
"An employee was struck by HDPE piping, breaking his back and 10 ribs. He was hospitalized and required surgery.",1
An employee suffered damage to the right index finger and shoulder after being shot during a bank robbery.,1
"An employee was hydrostatic pressure-testing a section of pipeline when a pipe coupling separated and struck him in the face, lacerating his upper lip and causing dental trauma.",1
"An employee was moving soil and debris over a pile with a dozer. The equipment went nose down over an earthen embankment and slung the employee out. He struck the ground, and the equipment landed near/on top of him, lacerating his head and damaging his neck vertebrae. He was hospitalized. No seat belt was worn at the time of the incident.",1
An employee was riding a four-wheeler through very dense fog to get to another area of the feedlot when he struck a closed steel gate. He suffered a fracture and a contusion to the face. He was wearing a helmet at the time of the incident.,1
"On 01/06/2015, an employee was manually feeding a work piece into a tabletop-mounted router to remove material/shape the edges of the triangular shaped work piece, which was 5-inches long by 2-inches tall. The work piece momentarily became stuck on debris that surrounded the router bit and then unexpectedly moved toward the bit, which caused the employee's right thumb/hand to go beneath the machine guard. The router bit partially amputated the employee's right thumb, removing the skin on the thumb tip.",0
"A maintenance employee was troubleshooting a production line when the employee got caught between a welding parts machine and a robot while adjusting a sensor. The employee was hospitalized with a broken nose, fractured neck, fractured back, and two fractured ribs.",1
An employee was driving a pickup truck down a driveway to the employer's site across the street. The employee moved to the side to avoid an oncoming vehicle and collided with a trailer that was parked there. The employee suffered two broken neck bones.,1
"On or about January 6, 2016, an employee was removing roller tables. The employee stacked one table on top of another other table. When the employee turned to retrieve straps to secure the tables for transportation, the top table slid and struck the employee's left leg, breaking the tibia and fibula and requiring surgery.",1
"An employee was riding in a truck transporting a container that was to be crane-lifted onto a ship. As the container was being lifted from the truck, it stuck to the body of the vehicle, thus lifting both the container and the truck. The employee fell from the inside of the truck down to the ground, breaking his left leg.",1
An employee was walking in the parking lot and slipped on ice falling and fracturing an ankle.,1
"An employee was working on the bed of a truck and was attempting to position a V-Board. The employee stepped over shingle skids to strap the load down and fell sideways off the truck, fracturing ribs.",1
"An employee was reversing a powered industrial vehicle. While he was going to turn, his foot went outside of the truck and struck a rack. He suffered a lower left leg fracture.",1
"An employee entered the slitter machine area to cut off a piece of material. The machine was running at the time.  The employee's left hand and forearm were crushed between two rollers on the machine, requiring hospitalization.",1
An employee was operating an arc welder on a pipe conveyor line when he attempted to perform maintenance/make adjustments to the unit. A pipe on the conveyor struck and broke his right leg.,1
"A maintenance employee was using a pipe wrench to unstick a machine shaft when his hand or the wrench slipped off the shaft as he put his weight down. He then fell onto the wrench, which contacted his right orbital. He was hospitalized.",1
Employees were rolling flotation tires into the bed of a pickup to take them to a field where the contracted company could install them on trucks to remove modules from the wet fields. An employee was hospitalized and had surgery.,1
"An employee working on a demolition project fell from an elevated level to the concrete floor, cutting the back of his head.",1
An employee was retrieving lunch meat from a refrigerated cooler when their right foot became entangled in an electrical cord at the base of the cooler. The employee fell on the left knee and broke the left hip.,1
"An employee was cleaning wheat out of a grain elevator leg, which had filled with wheat and prevented the belt/elevator from moving. The belt was not locked out at the time. A coworker on the floor above was instructed to start the belt to see if it would move while the employee was still clearing wheat. The belt started, and his hand got caught between a bucket and the metal housing of the leg, amputating his hand a few inches above the wrist.",0
"After hanging pipe, an employee fell approximately 10 feet to the ground while descending a ladder.  The employee lost consciousness and suffered head and face contusions.",1
"An employee fell in the parking lot while getting out of a car. The employee's head hit the pavement, requiring hospitalization.",1
"While participating in a workplace violence hands-on training class, an employee fell to the floor on landed on her bottom and hip. She broke her hip and was hospitalized.",1
An employee's pinky finger was amputated below the fingernail while the employee attempted to remove a defective spool on the creel wire machine. The machine was running at the time of the incident.,1
An employee was lifting a tub containing mail and phone books to place it into a hamper when she felt a sharp pain in her upper left torso. She suffered a muscle strain.,1
An employee was cutting concrete when a piece of concrete chipped off and struck the employee's left eye. The employee required surgery.,1
"An employee stepped on a loose bolt sitting on the floor, slipped, and fell, breaking his hip.  He was hospitalized and had surgery.",1
An employee was injured in a fight and suffered bleeding in the brain.,1
"Employee was walking towards the corner of the line kill to add oil to the equipment. He started walking through what appeared to be sawdust on the ground, but slipped and fell in what turned out to be an 11"" to 12"" deep mix of sawdust and lime mud. He suffered from chemical irritation and small chemical burns to his right leg.",1
"An employee was cleaning the concrete mixer with a stick when he lost his balance.  He dropped the stick and tried to grab hold of something. His hand went into the open lid of the mixer, lacerating the first three fingers on his right hand.",1
While exiting the breakroom an employee collided with a co-worker and suffered a skull fracture.,1
"An employee was preparing to offload materials at a laydown yard. He was reaching for a cable attached to a load when his leg gave out, causing him to fall from the truck and fracture his left leg.",1
An employee was washing her hands before preparing her dinner when she was burned by the instant hot water spigot.,1
"An employee went to tighten a load on the back of a step deck trailer by pulling on a load strap and ratchet. While pulling on the load strap, he lost his balance and fell backwards, striking his head on the road's surface and requiring hospitalization.",1
"An employee's left thumb was smashed between a hospital bed frame and a radiant heater, resulting in the bone being exposed. She was hospitalized and had surgery.",1
"An employee was walking down dock steps when he slipped and fell, striking his head. He was knocked unconscious and was hospitalized with neck, back, and head aches. He also had bleeding in the brain and was kept overnight.",1
"An employee was working behind pipe coating line equipment. He dismounted approximately 4.5 feet from his work platform and lost his footing. He lacerated and injured his shoulder, head, and arm.",1
An employee was struck by a motor vehicle and was hospitalized.,1
"An employee mopped the floor of the dish room and then slipped and fell on the wet floor. The employee sustained a fractured right hip, requiring hospitalization and surgery.",1
An employee was loading the kiln. A hook fell off of the rail car that enters the kiln. The employee attempted to reconnect the hook and caught his ankle in the rail car path resulting in a broken leg.,1
"An employee fell from a 2-foot ladder while screwing a metal piece on an air-conditioning unit, sustaining five broken ribs and a fractured lower back.",1
"An employee's glove got caught in a metal lathe, amputating the index, middle, ring, and pinky fingers of the right hand.",0
"While working on a sorting line, an employee was sprayed by a flammable chemical when the bottle that it was in got stuck on the conveyor. The ignition source was a portable heater that was being used to keep the employee warm. The employee received 1st and 2nd degree burns to the right hand and right leg.",1
"While attempting to clean a caser machine at Nissin Foods, an employee's thumb got caught in the conveyor drive chain and sprocket. The employee's left thumb was partially amputated. The machine was not locked/tagged out at the time of the incident.",0
"An employee was loading a pneumatic roller onto a flat bed trailer.  Once the roller was centered, the employee attempted to place the roller in park, but hit the wrong lever.  The roller started to move in reverse, so the employee tried to put it back into forward.  The rear wheels started to spin and the roller fell off the flat bed trailer.  The employee held on as the roller was turning over and hit a mailbox.  The impact with the mailbox broke the employee's left femur.",1
"An employee was one member of a crew applying road asphalt. The 10-wheel truck dumping the asphalt backed over the employee's feet, breaking two bones in his right foot and requiring stitches.",1
"An employee was helping a forklift lift a metal brace that was frozen to the ground when the brace became free and popped up, hitting and breaking the employee's ankle.",1
"An employee exited a vehicle to instruct the vehicles behind hers to back out because her vehicle was stuck. When she exited the vehicle, she slipped and fell on the wet ramp floor, hitting her head on the ground and fracturing her right ankle.",1
An employee operating a pallet jack collided with an employee operating a high-lift fork truck. One employee suffered a broken pelvis.,1
"An employee fell/tripped on the bottom step as he exited a bus, falling to the asphalt pavement and landing on his knees. He tore his left and right quadriceps and required surgery.",1
"An employee's left-hand pinky, ring, and middle fingers were amputated while he was cutting product on a band saw. He was hospitalized and had surgery.",0
A technician was discussing the job with a customer and was bitten by the customer's dog causing lacerations to the right forearm and muscle damage.,1
An employee's left pinky finger was amputated.,0
"An employee had to walk around the end of a conveyor at the front of the line to retrieve a hose for cleaning. While walking by the conveyor, his hand was pulled under the fabricated guide. He suffered a fracture.",1
"An employee was lifting a section of metal roller conveyor when it fell on his left pinky finger, amputating the fingertip.",0
Finger amputation.,0
An employee was troubleshooting a grease line when he contacted an energized electrical line that ran parallel to the grease line. He was shocked and suffered electrical burns to his hand.,1
"An employee 
was doing maintenance on a piece of equipment that was shut down. He grabbed the motor's damper/pulley belt and pulled the belt toward himself. This caused the damper/pulley to rotate, pinning his right-hand thumb between the damper/pulley and the belt. As a result, the top part of his right-hand thumb (approximately 1/8"" to 3/16"") was amputated.",0
"An employee was using a 4x4 to move a steel beam onto a truck when the board snapped, causing him to lose his balance and fall from the truck. He fractured his ankle.",1
An employee was struck in the head by a mooring line that broke while the employee was getting off the vessel. The employee suffered broken face and back bones that required surgery.,1
"While attempting to unclog a dust collection bin's rotary valve, an employee's fingers got caught in the flap wheel of the valve. His three left-hand middle fingers were severed above the second knuckle.",0
An employee was bench-testing a rebuild on a CO2 pump when it unexpectedly cycled and amputated his fingertip.,1
"An employee was maneuvering a fifth wheel plate onto the bucket of a front-end loader.  The employee and a coworker lost control of the plate, which fell flat.  As it fell, the employee's right middle finger got pinned between the top of the front-end loader bucket and the fifth wheel plate, amputating the tip.",0
An employee was cutting neck bones in the pack room with a band saw when the saw amputated his left index finger.,1
"As an employee was carrying boxes from one line to another line, she tripped and fell over a pallet, breaking her left tibia and fibula.",1
"An employee was crushed between a forklift and a battery changing machine, injuring his torso area, chest, and back.",1
"An employee was moving a conveyor with a crane and sling when the sling snapped, striking the employee in the face and knocking him backward. He was then struck in the face by the conveyor. He suffered facial cuts/lacerations and was hospitalized with a possible concussion.",1
"An employee was checking the shaker on the slurry unit when the unit caught on fire, causing 12% burns to his head, face, and neck.",1
An employee was crushed by boxes that fell off a forklift when the shrink wrap tore.,1
"An employee was riding an elevator from the 2nd to the 3rd floor when the elevator fell back to the 2nd floor. The employee fell, breaking his pinky finger and fracturing his back.",1
"On January 8, 2016, an employee amputated two fingers while operating a table saw to rip lumber.",0
"An employee was conducting food prep work in the deli when a loop from her right shoelace got caught on the wheel of the deli slicer table. She tripped and fell on her right wrist and right knee, resulting in a right wrist strain, fractured knee, and possible head injury. She was hospitalized.",1
"An employee was coring through a sewer while working in a 15-foot deep excavation. The employee's leg got trapped by debris outside of a trench shield, resulting in a lower limb injury.",1
"On or about January 9, 2016, an employee was descending a cross-over ladder with a bucket in hand. The employee slipped off the ladder and fell to the ground, fracturing both his left and right wrist.",1
An employee's left foot was fractured when he was run over by a tow motor pulling cart.,1
"An employee pushed another employee down the stairs during a verbal altercation. The pushed employee suffered a broken ankle due to the fall, requiring surgery.",1
An employee was moving a valve body with a hoist from a CNC Machine to the side of the machine.  The valve body slipped from the clamps that were holding it and hit the employee in the right leg between the knee and ankle. His leg broke.,1
"An employee fractured his ribs, sternum, back, and shoulder when a tree fell on him while he was clearing it off a power line.",1
"While cutting metal baseplates on a band saw, an employee attempted to sweep shavings from the cut. His left index finger came into contact with the band saw blade, amputating the fingertip.",1
"An employee was pulling trays (unknown how heavy) over rollers in the fodder barn. The employee lost their footing and fell, suffering a broken sacrum/pelvis, requiring hospitalization.",1
"An employee was climbing a ladder when he suffered a hernia, resulting in hospitalization and surgery.",1
"On or about January 10, 2016, an employee's left hand was lacerated by a belt while troubleshooting a towel folder machine.  The employee was hospitalized.",1
"An employee was injured while operating a plastic bottle palletizer. The employee was caught in the moving components of the machine and suffered skull, neck, and jaw fractures.",1
"While unloading items from a pallet, an employee tripped over the pallet and fell to the floor, breaking the right hip. The employee was hospitalized and had surgery.",1
"An employee was de-catering an aircraft at when he fell approximately 10 feet from the platform of his high-lift catering truck. He suffered a contusion to his cervical cord, sternum, and right leg.",1
"An employee was organizing his work truck when a large tank of R-22 refrigerant fell out of the truck, causing the valve to open and spray the employee. He received chemical burns to his face, neck, shoulders, and chest area.",1
"On January 10, 2016, at approximately 4:35pm, an employee was hospitalized after falling on wet, icy grass, while walking to her car after work.  The employee suffered a fracture and dislocation of her upper left arm resulting in surgery.",1
An employee's fingertips got caught while he was trying to put a chain on a sprocket on a belt conveyor. His right ring and pinky fingertips were amputated.,0
"An employee was walking up the staircase at the worksite, ran into a coworker and fell. The employee reached out to brace for impact and suffered a triceps tendon avulsion in the left arm that required surgery.",1
"A maintenance employee was pulling antenna cables while standing on a 6-foot A-frame ladder when he slipped and fell to the ground below, sustaining a head injury.",1
"On January 11, 2016, at about 2:00 p.m., an employee was struck by support pieces from a racking system that was being disassembled. The employee suffered cracked vertebrae.",1
"An employee dismounting a powered industrial truck stumbled and struck a safety rail, resulting in lower leg fractures and hospitalization.",1
"On or about January 11, 2016, at 10:30 a.m., an employee was operating a CNC saw and made a trim cut. When he tried to remove the scrap piece, the front-side pressure device activated and trapped his left pinky finger, avulsing part of the skin. He was hospitalized with a partial finger amputation.",1
An employee was trying to remove a metal piece from the punch/iron-work machine when the machine cycled and amputated his left index fingertip.,0
"An employee was walking around his truck in the parking lot of a customer's facility during a freight pickup when he slipped on ice and struck his head on the concrete, suffering bleeding in the brain.",1
"On 1-11-16, at around 11:47 a.m. CST, an employee was investigating a robotic system that had shut down in a safety cell due to an error.  An explosive device fell from the machine to the floor and detonated while he was exiting the cell. He was thrown against a door frame, breaking his arm and suffering whole-body blunt force trauma.",1
An employee received first degree burns to the forearms and face from steam that was created when water being used to wash the catalyst media touched a hot spot in the media.,1
"An employee was riding on the mast of a forklift while a coworker operated the forklift. They were in the process of fixing a leaning pallet when the employee's foot got caught between the mast, amputating his left toe.",1
An employee was feeding potatoes into the robot coupe and contacted the blades resulting in the amputation of the left index fingertip.,1
"While bagging product on the packing line, an employee attempted to remove debris from the bagger. The employee's thumb got caught in a roller, amputating the tip.",0
"An employee slipped and fell on ice while delivering mail, breaking two ankle bones.",1
"An employee was preparing to change out the equalizer block on a crane when the block fell over and struck the employee, who suffered broken bones in both legs.",1
"On January 11, 2016, an employee was hospitalized after slipping on ice and falling, breaking a leg, while inspecting a truck trailer.",1
"An employee was preparing to change the tire on an electric pallet jack. A hydraulic jack was used to lift the pallet jack while a jack stand was placed into position. The jack slipped, causing it to fall and injure the employee's left pinky finger. His finger had be surgically treated and partially amputated due to tissue damage.",0
"An employee and two coworkers were removing counterweights from a tractor. The employee used a pipe to balance the counterweight, but the counterweight shifted, causing the pipe to strike the employee. He fell on the cement floor and suffered chest, wrist, and head injuries.",1
"An employee was trying to determine why an automatic gate was stopping and functioning incorrectly. While attempting to open the gate, the employee's left ring finger got caught inside the gate opening and was partially amputated.",0
"An employee conducting an electrical test on a cable product contacted a live electrical current, suffering burns from an electrical shock. The employee was hospitalized.",1
"An employee was carrying items from his car to truck when he slipped on ice, breaking his hip and pelvis.",1
"On January 11, 2016, an employee loading a tractor trailer slipped on panels covered with a protective paper and fell off the trailer, fracturing the fibula and heel.",1
"An employee climbed a portable ladder and was fixing the motor on an overhead door. One of the portable ladder's feet was inadvertently placed on the lip of the overhead door. The employee activated the switch to open the door. As the door opened, the ladder tipped backward and he fell. The ladder fell on top of his left leg, breaking it in several places.",1
"An employee's left arm was lacerated by a saw, requiring hospitalization.",1
"An employee was placing a ladder against the main building to tie it off. As he climbed the ladder, he reached out with his right hand and grabbed the energized metal gutter on a drive-under canopy next to the main building and was shocked. This caused him to fall off the ladder, dislocating/breaking his right shoulder, and cracking his right shoulder blade and vertebrae. He was hospitalized.",1
"An employee was hospitalized for burns to his hand and leg after attempting to start a ""warming fire"" at a work site using diesel fuel.",1
An employee was attempting to warm spray paint cans in front of a heater when the cans caught fire and burned the employee's hands and forehead.,1
"An employee was walking across a concrete area covered by black ice and snow. The employee slipped and fell, sustaining two fractures to the left ankle and requiring hospitalization.",1
"An employee was using a pneumatic strapping tensioner to form a steel coil band around sheets of steel.  When he was repositioning his hand, he grabbed the side of the handle and hit the crimp mechanism. The crimp mechanism clamped down on his left-hand index finger, amputating the finger from the nail to the first joint.",0
"An employee was performing gouging operations on the internal surfaces of a vessel when a flash fire occurred. The employee received burns to the upper chest, arms, and legs (approximately 44% of body) and was hospitalized for treatment of burns and smoke inhalation.",1
"An employee walking down steps in a cell block lost their footing and fell, suffering a broken right leg.",1
"An employee was disconnecting a hose at the unloading bay to move a vehicle to another location. The valve was not shut off at the time and hot asphalt was released, burning the top of both of the employee's hands and wrists. The employee was hospitalized.",1
"While delivering mail, an employee slipped on ice and struck her head on the ground. She was hospitalized with bleeding on her brain.",1
An employee burned the tops of both hands and wrists while disconnecting a hose on the asphalt machine.,1
"An employee delivering mail was injured while on a route. Upon exiting the vehicle, the employee fell and broke their left hip, requiring hospitalization and surgery.",1
An employee slipped and fell about 10 feet from the tile roof as he was preparing to do cleaning. He broke his heel and tibia.,1
"An employee was applying sealant on the edge of a roof when he lost his balance and fell 28 feet to the ground below, dislocating his right hip.",1
"At approximately 8:30 a.m., on January 12, 2016, an employee slipped on ice and fell while taking garbage out to the bin. She broke her hip and was hospitalized for surgery.",1
"An employee was moving lumber with a hoe when the lumber shifted and fell off, striking and fracturing the employee's right leg.",1
"While delivering mail in the city, an employee tripped on a snow-covered curb. The employee suffered a compound fracture of the right fibula and tibia near the ankle.",1
"An employee was cleaning the grate on an attrition mixer. A coworker moved a lift truck and accidentally pinned the employee's foot between the forks and the mixer, lacerating his right foot arch.",1
"An employee returned from a home-based care site and parked in the parking lot. While unloading the car and standing between two parked cars, the employee slipped on ice and/or snow and fell to the ground, resulting in a fractured hip and hospitalization.",1
"An employee was attempting to remove aluminum product that had jammed a conveyor when the conveyor activated, catching his thumb in the chain that makes it move. He was hospitalized with a broken right arm, wrist, and middle finger, and his right thumb was partially amputated.",0
"An employee was standing on a ladder, performing welding work on a trailer. The trailer A-frame broke and collapsed, causing the employee to fall and fracture his left leg.",1
"An employee was shooting different elevations when he fell onto a piece of rebar, which punctured his left leg.",1
"An employee was descending a fixed ladder after adjusting the control wheel. The wheel is accessed from a platform at the top of the ladder. The employee slipped on either the third or fourth tread and fell to the concrete floor below, sustaining a possible small fracture to the left foot and a possible lumbar spine compression fracture.",1
"An employee was operating a shear line to fabricate steel rebar when the rollers on the dump table stopped working. While attempting to diagnose the problem, his left glove was caught in the in-running nip point of the rollers' belt and pulley, amputating his left pinky fingertip.",0
"An employee was walking outside between two exterior buildings to get a bucket to mop the floor when he slipped on snow and fell to the ground, fracturing his ribs.",1
"An employee was troubleshooting the clutch on a press when the press began running, amputating his right-hand ring fingertip.",0
"An employee experienced neck pain while pulling a barrel on some rollers. The employee was hospitalized, where doctors noticed bleeding on the brain.",1
"An employee slipped on ice and fell while walking on the loading dock, breaking the left hip.",1
"An employee was working with a crate filled with five glass panels.  The crate was sitting on the floor. As the employee was maneuvering a glass panel in the crate, the crate shifted, causing five glass panels to fall out and onto the employee's lower left leg. The employee was hospitalized with a lacerated and broken lower left leg.",1
"An employee slipped and fell while delivering mail to a residence, suffering a head injury, as well as eye and chin lacerations.",1
An employee was using a scouring pad to clean the rubber pressure and printing rollers on a printing press. The machine was running at the time. The employee got caught in the nip point between the rubber pressure roller and the printing roller and was hospitalized with two broken fingers. Surgery had to be performed.,1
"As an employee was pushing refrigeration equipment up a truck ramp, he felt a tug/tear in his left calf muscle, which then caused a blood clot. He was hospitalized.",1
An employee was running a machine that shakes raw material and fluffs up fiberglass so that it can be processed. The employee heard a sound and attempted to inspect the inside of the machine. The machine's rotating drum partially amputated his right index finger.,0
An employee slipped and fell on spilt soybean oil while walking across the production floor.  The employee was hospitalized with a right hip fracture.,1
"An employee was preparing to move a cart loaded with springs when the cart tipped over and springs fell onto his right leg, fracturing it and requiring hospitalization.",1
"An employee was warming up the van to prepare for patient pickup. While walking next to the van, the employee slipped on an ice-covered curb, injuring their left leg and requiring surgery to the left tibia.",1
"An employee was cleaning and performing light maintenance on a bindery when his right index finger got caught in a chain and sprocket, amputating the fingertip.",0
An employee's right ring finger got caught between furniture and a template press during T-molding operations. The employee's fingernail was amputated.,0
"An employee was struck in the head by a scaffold plank, which fell approximately 10 feet while it was being dismantled. The employee was hospitalized.",1
"An employee building high-voltage overhead powerlines came in contact with 7,200 volts from a live jumper line. The employee was hospitalized for an electrical shock and burns.",1
"An employee was cleaning a fryer with a brush. The brush fell into the fryer, splashing hot oil on and burning the employee's hand.",1
"While an employee was grinding a weld, sparks caused his shirt to catch on fire. He received second and third degree burns from the mid torso to the upper chest area.",1
"An employee climbed a ladder to reach the unscramble machine, which was jammed. When she attempted to unjam it, the machine broke her right hand and thumb.",1
"An employee was riding on the side of a forklift being driven by a coworker. The employee riding on the side of the forklift fell off, and the forklift rolled over the employee's leg.",1
"A maintenance employee was working from a ladder when he fell down, striking his head on the ground and sustaining head trauma.",1
"An employee was kneeling down to take measurements for a curtain wall when a forklift operator drove through a door and ran over the employee's left foot, fracturing it.",1
"An employee was installing staircase treads on an industrial-type staircase when he lost his balance and fell from a 10-foot scaffold, severely gashing his right elbow and requiring hospitalization. He was wearing fall protection at the time.",1
An employee was being treated for a work-related cut when he passed out and struck his head on the ground.,1
"A steel coil was being flipped while an employee was standing behind the machine. The steel coil came off the machine, hitting and amputating the employee's finger.",0
An employee's fingertip got smashed between a trailer and truck while the employee attempted to hook the trailer up to the truck.,1
An employee's right hand middle finger (glove) got caught and was partially amputated by a conveyor when the employee reached to remove a piece of rotten fruit.,1
"An employee was coming down a ladder and slipped on the bottom rung. The employee fell to the concrete, fracturing a hip.",1
"An employee was emptying material from a medium-sized kettle in a popcorn machine. Hot oil and popcorn from the kettle fell on his right forearm and hand, causing second degree burns.",1
"An employee cleaning a work area slipped and hit the guardrail system, falling 6 feet to the floor below. The employee suffered a broken rib and deflated lung.",1
"An employee slipped and fell while walking in the back of a van, breaking his hip.",1
"An employee performing masonry work on a scaffold stepped back and fell 6 feet to the concrete floor, suffering a compound fracture to the lower right leg that required surgery.",1
"An employee was setting a wall on a house. The house's elevation was raised because the grade dropped in the rear of the house. The back walls were set and the end wall was down, being prepped to be set, when the employee slipped on ice and fell about 9 feet. The employee hit their head and suffered a spinal injury.",1
"An employee climbed to the top of an ergonomic stand and started talking to a coworker while his right forearm rested on a support bar. When the machine (line) started to come back up, his arm was pinned and fractured.",1
"An employee was removing a stop from the rollers on a conveyor system, which had been put in place to keep the 55-gallon drums of grease from rolling. A coworker started moving the drum while the employee's finger was still near where the stop was removed. His finger was smashed and amputated between the drum and the metal rollers.",0
"An employee was inspecting work near a 5000 gallon hot water tank. Water sprayed out of the tank and knocked the employee down. The employee sustained burns to his hands, feet and chest from the 200 degree water.",1
An employee was moving equipment out of a shop being remodeled. He was laying a drill press down flat onto a dolly. The press slipped and his left hand got crushed between the drill press and the dolly. His left hand broke and was lacerated.,1
"An employee was climbing a ladder that was set up on slushy asphalt.  The ladder slid on the slick asphalt, and the employee suffered a skull fracture.",1
"While attempting to load the panel used to cover the skylight on the roof, an employee fell approximately 9 feet through the skylight and hit his head on the ground below.",1
"On or about January 13, 2016, a molding can rolled off of the transfer car (stationary steel rollers) and pinned the injured employee against the dust collector. The employee's pelvis was crushed by the molding can, which weight approximately 600 pounds.",1
"Employees were lifting an I-beam (approximately 1800 pounds) with a material handler to place it on a tractor trailer. The strap used in the lift broke, and the I-beam struck an employee, breaking two legs.",1
"On January 13, 2016, at 4:40 a.m., an employee was working on a press. At the time, one sensor was not in all the way. She had her hand on one of the hand controls while she made the adjustment with the other hand. Her finger was crushed in the process.",0
"Workers were drilling with a drill rig when a deflection pipe broke off and a stream of water hit an employee standing nearby. The employee fell backward and hit his head on a piece of equipment, fracturing his skull.",1
"An employee was walking into the building and had snow on the bottom of his shoes. He slipped and fell, breaking his ankle.",1
"An employee was stepping out of the back of a delivery truck when he fell approximately 3 feet to the ground, fracturing his right hip.",1
"An employee slipped and fell on ice in the asphalt parking lot, fracturing an ankle.",1
"An employee was waiting on a truck to unload pallets.  A strap got stuck on the pallets, so he climbed up to dislodge it. He fell 15 to 20 feet backwards off the truck and hit his back and head, suffering a concussion. He was hospitalized.",1
"An employee's gloved hand got caught and pulled into a wood-working machine, amputating several fingers.",0
An employee fell in the parking lot and broke her humerus.,1
An employee fell out of her chair and injured her left arm.,1
"On 1/13/16, an employee fell to the concrete floor while working from an 8-foot step ladder.  The employee suffered a head injury and was hospitalized.",1
An employee fell 6 feet from a baker scaffold during demolition operations.,1
"An employee was adjusting a slip-sheet in a carton tub in the packing hall. When the loading mechanism cycled, the employee was pushed against the frame of the equipment, suffering broken ribs.",1
An employee was installing a left port wing panel on an aircraft when his left index fingertip was amputated between the panel and the body of the aircraft wing.,0
"On January 13, 2016, at approximately 10:00 a.m., an employee was using a compound miter saw to cut a board when the plastic guard on the saw shattered, and the guide slammed down and amputated the employee's left-hand ring finger and middle fingertip.",0
"An employee was unbolting screws that secured a steel flange to a collar support at the end of a hydraulic cylinder. After a coworker separated the collar from the flange using a pry bar, the 200- to 300-pound flange fell and crushed the employee's little finger.",0
"An employee was checking the priming mix in the priming machine. When he opened the blast door to the machine, the cable supporting the counter balance for the door broke, causing the door to slam onto and amputate his left middle fingertip.",0
"An employee was performing a function test on the hydraulic landing gear when the landing gear door opened/closed on the employee's arm, breaking their right wrist.",1
"An employee threading a calendar stack in a paper machine attempted to clear wrap that had wrapped around the stack. The employee's left hand got caught in a nip point, amputating the pinky finger and partially amputating the ring finger.",1
"An employee was feeding paper through a web press roller when his left ring finger got caught between the rollers, amputating his fingertip.",0
An employee suffered a partial left fingertip amputation while trying to clear a jam in a grinder.,0
"An employee stepped backwards off a landing deck and fell approximately 21 feet to the ground below, suffering a head injury. His retractable lanyard caught, but the lanyard broke as it rubbed against the beam.",1
"An employee was offloading iron from a trailer when the employee's right index finger got caught between a 4-inch iron, which fell from above, and the edge of the trailer.",1
"An employee was walking near a forklift that was moving a 500-pound rack used for plating automotive parts. The load shifted and struck the employee, breaking the employee's right femur and causing lower back and hip injuries.",1
An employee was installing the right-side jaw on a machine when his hand got stuck between the machine's plate and the jaw. His left index fingertip was amputated.,1
"A maintenance employee was unplugging a process condensate drain line. When the plug came loose, 200-degree water shot out and caused 2nd degree burns on the employee's chest, neck, and arm. He was hospitalized.",1
"An employee broke his ankle in three places while climbing stairs on January 13, 2016, at approximately 10:20 AM. 
He was hospitalized for surgery.",1
"On 1/13/16, at 8:30 a.m., an employee was running a manual assembly press with two hand controls installed. While the employee's hand was in the point of operation, the press activated and pinched the employee's left index finger, amputating the tip.",0
An employee amputated the middle and ring fingers of his right hand while operating a mixing machine.,0
"While driving a buggy, an employee's ankle was crushed between the buggy and a barilla (storage of project material) full of screw jacks. His ankle broke.",1
"On January 13, 2016, an employee was cutting cast iron stack with a reciprocating saw when the saw blade snapped. He suffered neck vertebrae injuries and required surgery.",1
"While descending an A-frame ladder, an employee lost his balance and fell. He landed sideways and broke his right ankle, requiring hospitalization.",1
"An employee was exposed to excessive sheetrock and floor tile dust that entered the workplace from renovation being conducted in the work area. The employee suffered an asthma attack, which resulted in respiratory failure.",1
"An employee was cutting square metal tubing on a chop saw when a piece of metal tubing got jammed in the saw. When the employee tried to unjam it, the saw lacerated his middle finger.",1
"An employee was removing palletized seasonal items from a shipping container located behind the store using a pallet jack. A pallet was wedged by another pallet approximately 12 feet inside of the container.  The employee on the pallet jack asked another employee to unjam the pallet.  That employee's leg slipped on the wet floor of the container and struck the jack, injuring his foot.",1
"As an employee was exiting a forklift, her left foot was pinned between the forklift and a pole.",1
"An employee was driving a standup forklift in the finished good aisle when he was pinned between the lift and racking, breaking his left forearm and fracturing his left ribs.",1
"An operator turned off the extruder when a maintenance worker told him to turn it back on. As he was turning it back on, he purged the machine. Air was caught behind some plastic, causing the 325-degree plastic to shoot out and hit the employee's right arm. The employee suffered third degree burns.",1
"On January 14, 2016, at approximately 11:25 a.m., an employee was removing tile. While pushing some loose tile out of the way, a piece of tile popped up and lacerated his right wrist. He was hospitalized.",1
"An employee slipped on black ice in the parking lot, breaking a tibia and fibula.  The employee was hospitalized.",1
"An employee was unloading an air container when the contents of the container shifted, pinning the employee's finger between the container and the container net. The finger was surgically amputated.",1
A dough chunking machine blade partially amputated an employee's right middle finger and completely amputated the employee's right index finger.,1
An employee was picking orders using material handling equipment when her foot was caught between a storage rack and the equipment. She broke her ankle and amputated two toes.,1
An employee's fingers were caught in a safe door when a coworker closed it on the employee's hand.,0
An employee was exposed to an arc flash while conducting an electrical switching procedure on an electrical panel in the tank farm. His left shoulder and hand were injured.,1
"An employee was removing steel pipe. As he was cutting the clamps off the pipe, he cut into the second clamp, which was on a charged 6-inch air line. He was injured and required surgery.",1
"An employee was torch-cutting steel inside of a 75'-long by 18'-deep by 25'-wide barge, using oxygen/acetylene from a centrally located 75'-long gas-supplying line, when the employee suffered third degree burns from the waist to the neck.",1
"An employee sustained an avulsion fracture to the right small toe when he used a pry bar (7'7"" long by 1"" square tubing) to apply friction on a belt against a head drum located 8' above the floor. As the pry bar was being removed from the drum, the extended end of the pry bar landed on the employee's right toe.",1
"An employee was attempting to align belts on the sort gate assembly machine so that the machine could run smoother. The machine's air pressure was not disengaged at the time. The pressurized machine knocked out the pin that holds the belts in line and hit the employee's hand, breaking the left index finger. The employee was hospitalized for surgery.",1
An employee was hospitalized after his right foot was pinned between a power jack and steel rack.,1
"An employee was using a pneumatic jack to raise up a tractor truck. Once it was raised, and while he was attempting to place the jack stand under the leaf spring, the truck slipped off the jack.  The truck trapped the employee's right hand between the leaf spring and the jack stand, crushing and amputating his right index finger.",0
An employee slipped on ice in the parking lot and injured his right elbow.,1
"An employee was attempting to remove mud from an idler roller on a conveyor when his right arm was caught in the drive pulley, amputating it. The conveyor was running at the time of the incident.",1
"An employee was moving a cart of mud rotors when a rotor shifted, pinching the employee's finger against the cart. The flesh was removed from his left ring finger.",1
"An employee was loading a truck cab on a trailer while the tongue of the trailer was being held up by a jack. While moving the trailer, the jack slipped off the trailer tongue, partially amputating the employee's right pinky finger.",1
"An employee was removing the inside corner form for a concrete foundation when his left hand was crushed between the form and a waler, amputating his left middle finger and fracturing his thumb.",1
"On January 14, 2016, an employee was cutting a recycled paper insulation board using a table saw. His right hand came into contact with the blade, amputating his pinky finger.",0
"A maintenance employee slipped and fell from the side step while trying to wipe dew from a window on a telehandler, fracturing both wrists.",1
"An employee was loading a truck on 01/14/2016, at 01:00 a.m., with a forklift when the truck moved without his knowledge. When he dismounted the forklift, he fell off the dock, breaking his foot and requiring surgery.",1
An employee was standing on a box truck lift gate and riding it up to the closed position (from the ground). His right toe was crushed when it was pinched between the lift gate and the truck bed.,1
"While cleaning a conveyor, an employee's right arm was caught between the conveyor frame and the end pulley. He broke his right forearm and suffered minor lacerations. The conveyor was still running at the time of the incident.",1
An employee was cutting a piece of wood with a table saw when two of his left-hand fingers were amputated.,0
"An employee was greasing/cleaning a machine barring when his shirt was caught in a roller, pulling his arm into the machine. He suffered an open left distal radius fracture with soft tissue damage.",1
An employee was manually pulling down the gate on a cardboard baler when the gate crushed the employee's left index fingertip.,0
An employee broke his left ankle when his ladder collapsed as he was painting the side of a house.,1
"On January 14, 2016, an employee was working on a plastic extrusion line. Due to an issue regarding the temperature inside of the extruder, the employee began to remove a hot water line to the extruder. While removing the water line, hot water sprayed the employee, causing second degree burns to the back and arms.",1
An employee was operating the mold machine and amputated his right thumb.,0
An employee slipped off a wet railroad tie and broke an ankle.,1
An employee suffered head injuries when he fell off the forks of a forklift truck while inspecting smoke coming out of the dust collector bin.,1
"On or about January 15, 2016, an employee was inspecting castings on the quality belt.  While attempting to pull a basket of castings back onto the quality belt, the employee tripped over an electronic eye and fell backwards over the mid-rail and onto the ground, suffering a concussion. The top section of the guardrail was removed at the time of the incident.",1
"While purging a tank with nitrogen, an employee opened the tank valve before the hose valve. Pressure built up, and the hose came loose at the connection point of the tank. The end of the hose struck the employee's left eye.",1
An employee injured their right hip while changing a gas pricing sign. The employee was hospitalized.,1
"On January 15, 2016, an employee slipped and fell on the ice between the office and load rack breaking an ankle.",1
An employee was cleaning the windshield of his semi truck when he fell from the rig and fractured his hip. He was hospitalized for treatment.,1
"On Friday, January 15, 2016, an employee was operating a carding machine when his fingers were drawn into the equipment. Four fingers on his right hand were amputated.",0
An employee was hospitalized for burns to the face and hands when a flash fire occurred while he was draining a gas supply vessel.,1
An employee amputated a left hand fingertip while removing a rock from the corn flaking machine.,0
"An employee was loading the smoke house when a tree fell, injuring his right lower leg, foot, and ankle. The switch was not set at the time.",1
"An employee was injured while hanging a dropped hog onto a rail with a chain hoist.  The hog and hanger assembly fell, landed on a floor conveyor, and bounced off striking the employee on the outside of his knee. The hangar portion of the assembly caused a puncture wound to the knee and lacerated a tendon.",1
An employee amputated two fingers when his hand contacted a running vertical band saw while he attempted to remove the ribs from the spine of a cattle rib set.,0
An employee was placing the steel roof and ridge cap in place on a barn when he slipped and fell. He reached out and grabbed onto a piece of steel that lacerated four fingers and amputated his pinky fingertip.,0
"While an employee was removing the gear box from the chip silo and sliding it onto a four-wheeled cart, the cart moved and pinched his left ankle between the cart and the outside wall of the chip silo, fracturing it. He was hospitalized.",1
"An employee was re-threading a paper machine. When he attempted to grab paper, his right hand was pulled in and amputated.",0
"An employee was removing the cover from a 480-circuit when an arc flash/blast occurred, causing first and second degree burns to the employee's body.",1
"An employee was climbing an 18-foot extension ladder to perform welding tasks on top of a railcar.  The employee needed to descend the ladder to make an adjustment to the boom arm and as he was descending the ladder, the ladder slid down and he struck the floor.  He was admitted to the hospital with bilateral heel fractures and a compression fracture of the L-1 vertebra.",1
An employee was unloading cattle when a bull gored him in the left leg.,1
"An employee was working from a 6-foot stepladder, removing flex tubing from the ceiling level. He was pulling on the tubing when it gave way, causing him to lose his balance and fall to the concrete surface below. He broke his hip and elbow.",1
An employee amputated the left ring fingertip while operating a deboning machine.,0
An employee was hospitalized due to carbon monoxide poisoning.,1
"An employee was standing on a 6-foot step ladder, three rungs up, using two spud wrenches to re-align a screw cover. The employee lost his balance and fell injuring his right ankle and shoulder. The employee was hospitalized.",1
"An employee was walking in the parking lot, slipped on ice, and fell breaking a leg.",1
An employee was picking orders at the lumber yard and was exposed to carbon monoxide. The employee passed out for several minutes with memory loss and breathing problems resulting in hospitalization.,1
"On January 15, 2016, at approximately 11:00 am, an employee was installing siding and slipped and fell. He was wearing his harness and lanyard which arrested his fall, but he struck a small brick wall and broke his left leg. The employee was hospitalized.",1
An employee amputated the tip of his left index finger while working with the winder machine.,0
The employee was attempting to line up the holes of the heat exchanger with the holes in the heat exchanger support structure to reinstall the bolts that hold it together. The heat exchanger moved and caught his left thumb in a pinch point resulting in a partial amputation.,0
"An employee tripped and fell over a box while walking from one teller station to another, breaking their pelvis.",1
An employee was shoveling wet concrete in front of a paving machine when the employee's right leg/ankle got caught in the paving machine.  The employee was hospitalized for surgery on a broken right ankle.,1
"On January 15, 2016, an employee was hospitalized with a fractured hip after falling off a knee scooter inside the hospital's hallway.",1
An employee slipped and fell on the ice while walking into work and was hospitalized with a broken lower left leg.,1
An employee was welding near waste motor oil.  The waste motor oil caught fire and the employee sustained first to third degree burns to the legs while putting the fire out.,1
An employee operating a hand brake on a railcar fell due to an off-balance load. The employee was hospitalized with crushed ribs and chest and spine fractures.,1
A truck driver slipped on the concrete floor and fractured an elbow.,1
"An employee was repairing the condenser unit on the roof when he slipped and fell 10 feet on top of the freezer resulting in a broken collar bone, broken ribs and a sprained wrist. He was hospitalized.",1
An employee was operating the rope tow for the tubing park and amputated a finger.,1
An employee was hospitalized after falling and breaking a hip.,1
An employee slipped and fell in a company parking lot resulting in a head injury.  The employee was hospitalized as a result of the injury.,1
An employee was placing a car on the lift. It fell off the lift and amputated the right index finger.,1
An employee was moving his chair and tripped over the rug and fell.  He was hospitalized for a head injury and a laceration to the right ear.,1
A powered industrial truck operator was hospitalized with broken toes after getting his foot caught between the truck and a wall.,1
"An employee was leaving work and fell straight forward onto their forehead and nose.  The employee suffered a broken nose, lacerations to the forehead and a concussion.",1
An employee was operating a tenderizer machine and amputated the left index fingertip while removing a jam.,0
An employee suffered first and second degree burns to 20-30% of the body. The employee was using a floor waxing/buffing machine with a flammable solvent.,1
An employee was applying thin plastic film to the roofing material and the right arm was caught in a pinch point and injured.,1
"The employee was winding a winch cable. He was guiding the cable with his left hand when, by mistake, he pressed the activation pedal and his left middle finger got caught in the winch cable resulting in amputation above the first joint.",0
An employee fell down a flight of stairs and broke an arm. The break required surgery and in patient hospitalization to repair.,1
An employee fell while exiting the cab of a truck. The employee was hospitalized with broken ribs and a punctured lung.,1
An employee was operating a welder to assemble underbody automobile parts and amputated the tip of the left thumb.,0
An employee was testing tractor brake air springs by holding the air springs under water and looking for leaks. An air spring exploded and the employee sustained facial fractures.,1
An employee was using a broom to push cardboard down the trash chute. He tripped and fell into the compactor injuring his knee.,1
An employee suffered a broken finger on her left hand when the hand was pinned between the storage rack and the power industrial truck handle.,1
An employee was hospitalized due to an air bubble in his blood that occurred while delivering propane. The employee cut his hand and forced air entered the cut.,1
"An employee was unjamming a conveyor and the middle, ring, and pinky fingers on the left hand were cut by the conveyor pulley.",1
"On or about January 16, 2016, an employee slipped and fell on ice resulting in a broken ankle.  ",1
"An employee was assisting another employee in hooking up a hose to a vacuum truck.   The manifold over pressured and exploded, and the valve connected to the tank truck sheared, releasing solvent. The explosion knocked the employee to the ground breaking his arm, injuring his left eye and rupturing his eardrum.",1
The operator was in the process of cutting down wooden runners for partial bundles.  At the work station there is a pallet of wooden runners located on the floor by the cutting station.  Plastic banding used to hold the wooden runners together during transportation was not cut or removed when the pallet of wooden runners was placed in its designated area. This caused the loop of plastic banding to protrude out from the wooden runners area. When the operator was leaving the work station his foot got hung up in the loop of strapping causing him to trip and fall to the floor fracturing the left femur.,1
An employee was bitten by a cat on her left hand while cleaning out the warehouse on 1/15/2016. The wound became infected and the employee was later admitted to the hospital.,1
An employee was bitten on the right index finger and left thumb by a client. The employee was hospitalized after an infection developed.,1
An employee was working as a spotter in the yard where the trailers are stationed for loading/unloading. He was operating a spotting jeep (not a full tractor) and backed into a trailer resulting in a back injury.,1
An employee was operating a meat saw and amputated the right index fingertip.,0
An employee amputated the tip of his right hand ring finger while clearing a jam in the black cocoa line.,0
An employee amputated the right middle fingertip while using the die machine.,0
An employee was hoisting steel beams with a crane. The steel beam swung and struck him in the jaw resulting in a fracture requiring surgery.,1
"An employee was found confused and vomiting in the employee locker room. He stated that he fell and hit his head, but could not recall where. He was taken to the hospital and admitted for treatment of his injuries.",1
"An employee was teaching a snowboarding class and missed the airbag off the jump landing on the ground. The employee suffered a broken pelvis, cracked rib and a collapsed lung.",1
An employee stepped across a plasma cutter and landed on an anchor bolt that fractured his left foot.,1
"An employee was injured on January 13, 2016, while adjusting a three-phase unit that was loaded onto a conveyor. A piece of the welding wire grazed her right thigh. An infection developed in the thigh that later required inpatient hospitalization.",1
"A fork truck operator lost his balance while dismounting from the vehicle, fell and broke his hip.",1
"The employee was working with a crew repositioning a large rotor at a power plant. The employees were rotating the rotor 90 degrees. After rotating, the rotor stopped, then rolled back onto his hand resulting in a pinkie finger amputation.",0
A security guard tripped in the parking lot and fell dislocating a shoulder.,1
"On or about January 18, 2016, an employee was walking from a control room on a concrete walkway and slipped on ice falling down four steps and breaking an ankle. The employee was hospitalized.",1
An employee was working on a CNC machine. The employee stepped back and tripped on the CNC subframe resulting in injury to the lower left leg and hospitalization.,1
An employee was standing on a ladder to retrieve parts from a overhead shelf. He lost his balance and fell approximately 5 feet to the floor injuring his lower back.,1
An employee slipped on ice while moving a skid on his delivery truck and fell from the truck resulting in fractured ribs on the left side.,1
An employee was moving pallets with a pallet jack and backed into a slit machine (a forklift with wider forks). The blades of the slit machine struck his foot resulting in the fracture of the right pinky toe. He was taken to the hospital for surgery on his broken right pinky toe.,1
"The employee was helping another subcontractor unjam the lock on the dump truck's gate. The employee put his hand on the latch and when it became operational, the lock struck his fingers and amputated the right pinky and ring fingertips.",0
"An employee was struck in the lower torso by the rear tires of a hostler/empty chassis. The employee suffered multiple rib fractures, a fracture pelvis, internal bleeding and a lower back injury.  The employee was hospitalized.",1
"An employee was delivering a postal package at a residence and slipped on snow/ice, breaking an ankle.",1
"An employee was installing a utility pole using an auger. The auger jammed and when the employee released the jam, the auger struck the employee in the right leg breaking the tibia and fibula and dislocating the right ankle.",1
"On January 18, 2016, an employee's finger got caught in the cross auger (screw type auger) while clearing a product jam. The employee initially received an avulsion injury to the right ring finger. The finger was later surgically amputated.",0
An employee was cutting meat on a band saw and amputated a middle fingertip.,0
An employee was forming a piece of round metal on a forming press and lacerated the right thumb and index fingers.,1
An employee sustained a partial amputation of his left thumb while sanding a part using a hand held disc sander.  The part grabbed and pulled his thumb into the disc causing the amputation.,0
"An employee was walking in the hallway, slipped, and fell to the floor injuring the left ankle.",1
An employee fell six feet from a scissor lift while removing a piece of wall angle.,1
An employee fractured his back when he fell trying to access a raised Jeep.,1
An employee was moving supplies on a metal pallet rack. The rack collapsed and struck the employee on the head.  The employee was hospitalized with lacerations to the head.,1
An employee was changing the breaker on a live panel (1200 Amps/480 Volts) when two phases crossed and an arc flashed occurred. The employee suffered head and face injuries.,1
An employee was pulling a king pin to release a trailer and slipped and fell fracturing his right ankle.  Employee was hospitalized.,1
An employee was getting off of a forklift when her clothing caught on the gear shift and put the forklift in reverse. The forklift struck her leg resulting in a bruise.,1
An employee was moving a cart full of materials. The cart fell over onto the employee and fractured the left pelvis.,1
An employee was washing a ready mix truck when the left middle finger was caught in the flip chute lock resulting in a fractured finger.,1
"An employee was hanging window blinds from a ladder and fell, resulting in a head injury.",1
"On or about January 18, 2016, an employee was assisting a truck driver with a trailer tarp when the employee lost his balance while standing on the side of the trailer and fell 2.5 feet to the ground fracturing the right leg.",1
"An employee was operating a pacer (forklift type equipment). When he made a turn, he lost control of the pacer and stuck his foot out to brace for impact. Upon impact, his foot was caught between the guardrail and the pacer resulting in several fracture toes in his left foot. He was admitted to the hospital for surgery.",1
An employee was working on a lathe when his sleeve got caught in the rotating shaft. His left arm was pulled in and broken.,1
An employee was moving a rail car out of the paint booth. The bolts sheered off the winch base and it came loose striking the employee in the lower extremities resulting in a fractured right leg and left foot.,1
An employee was working from a ladder scrubbing the frame wall of a blender machine when he lost his balance and fell into the blender. He amputated the first two toes on his right foot.,1
An employee was struck by metal frames (load) that fell out of a semi trailer resulting in broken bones in the back and torso.,1
An employee was cleaning an auger and replacing a plug when the flight of the auger amputated 1/4 of the left middle finger.,0
An employee fell from an eight-foot ladder resulting in a broken right ankle.,1
An employee was screwing a partition truck onto wood above his head. The screw gave way and bounced behind his safety glasses striking the left eye.,1
An employee was loading boats onto trailers. The employee was moving a large boat and his left hand was caught between two boats resulting in the amputation of the index and middle fingertips.,0
An employee delivered fuel to a travel stop and sustained a spider bite on the right forearm.,1
"A route driver stepped off the back of the delivery truck,  missed the grab handle and fell to the concrete.  The employee's left arm sustained a compound fracture requiring surgery and hospitalization.",1
"An employee was hospitalized from an injury sustained after stepping backwards and becoming caught between the working platform and the fixed access ladder, falling and breaking a leg.",1
An employee was using a scissor lift to gain access to suspended piping. The scissor lift controls failed allowing the lift to continue to elevate. The employee's head struck the suspended piping resulting in a fractured jaw.,1
Employees were staging materials.  An employee was struck in the back by a column that fell off of the forks of a skid steer resulting in a fractured hip.,1
The employee was dumping material from a dump truck and was struck by the material (approximately one ton of soil) resulting in a compound fracture to the leg and a broken nose.,1
An employee was relocating a conveyor belt when it shifted in the wrong direction and caught his pinky finger resulting in amputation at the first knuckle.,0
An employee was hospitalized due to a laceration to the right foot which resulted from an accident involving a double pallet jack and a racking system.,1
"While pulling on some belts to unchoke the lint cleaner, an employee got his ring finger caught in the belts resulting in a fingertip amputation.",0
"The employee was operating a stand-up forklift and wanted to stop it. Before it came to a complete stop he dismounted the forklift, then realized it was not stopping and attempted to jump back onto the forklift.  His foot and ankle got jammed between the forklift and a metal pole resulting in foot and ankle fractures.",1
"An employee lost control of a forklift while turning, and the employee's left hand got pinned between the racking and the forklift fracturing it.",1
An employee was attempting to retrieve a tool that had rolled beneath a material feed system and her hand contacted the bevel gear resulting in an open fracture to the right middle finger.,1
An employee walked in front of a forklift and was knocked down by the forklift hitting his head on the ground.,1
An employee was climbing a scaffold when the scaffold came apart.  The employee fell 12-15 feet to the ground resulting in a upper left thigh laceration and a compression fracture to the T10 vertebra.,1
A piece of dough got stuck in the bagel maker machine. The employee tried to remove the stuck piece of dough and got his finger caught in the machine resulting in a partial amputation.,0
An employee was attempting to attach his fall rope to the anchor on the roof.  He slipped and fell resulting in cracked vertebrae.,1
An employee was restocking a unit when the employee stepped onto the conveyer. A roller was missing and the employee's left foot went through the conveyor resulting in a broken ankle.,1
An employee was clearing a jam from a bottle forming machine. The mold closed on the employee's right hand resulting in crushing injuries to the hand and wrist.,1
An employee was transporting a battery with a hoist. The employee's left ring finger was caught between the battery and the battery cage resulting in the amputation of the left ring fingertip.,0
"An employee was removing a radiator bracket and cut his knuckle on the sharp metal.  Several days later, the wound became infected and the employee was hospitalized.",1
"An employee was sitting in their chair, reached for something on the floor, and fell to the ground injuring their spleen.",1
"An employee was attempting to repair a carrier truck. When checking the slippage on the alternator belt, the system started and pulled the employee's right thumb through the pulley resulting in amputation of the right thumb tip at the hospital.",0
"An employee was operating a bandsaw. He slipped on a floor mat, fell forward and his right thumb made contact with the saw blade resulting in a fingertip amputation.",0
An employee was spot welding on 01/19/16 when a spark burned his right hand. The employee was later admitted to the hospital when the burn became infected.,1
An employee was climbing down off the mixer truck and lost their footing. The employee fell off the truck and struck their head on the slump rack. The employee was hospitalized for a possible concussion.,1
"An employee was trying to start a chipper when the chipper exploded, causing second degree burns to the employee's face, neck, and arms.",1
"An employee was hanging a horsehead on a pump jack. As the employee swung the horsehead into place and reached up to grab the weight, the weight was released. The employee's finger got caught between metal, and the fingertip was surgically amputated.",0
"An employee fell on the ice on January 19, 2016, and suffered a concussion, loss of consciousness and a cervical strain.",1
An employee was operating a concrete coring machine. The machine got hung-up in the concrete causing the machine to jerk and the employee to fall fracturing a hip.,1
An employee was removing boxes from a pallet in the receiving area.  The employee removed the shrink wrap and placed it on the floor. While removing the boxes his feet got caught on the shrink wrap causing him to fall on his side and fracture a hip.,1
An employee was power washing the inside of the car wash with a gas powered power washer and was hospitalized for carbon monoxide poisoning.,1
"An employee was working on a folder line. The folder line has two rotating cylinders that apply a stamp. The employee's right hand was caught between two running cylinders resulting in the amputation of the middle, ring and pinky fingertips.",0
"On 1/20/2016 at approximately noon, an employee slipped on ice in the parking lot and fell, striking her head. The employee was admitted to the hospital.",1
An employee was cleaning the seasoning box. The left index finger was caught in the swirl and amputated.,0
An employee fell and broke her right wrist and sprained her left wrist.,1
An employee lacerated a finger when it was caught in a press brake.,0
An employee got his left thumb caught in a pneumatic clamp which resulted in a partial amputation.,0
"On Jan 20, 2016, an employee stopped for a comfort break along the roadway. As she started to get out of her vehicle she slipped on the icy road surface, fell, and broke her left ankle. She was hospitalized for surgery on the ankle.",1
"On January 20, 2016, two employees inadvertently walked into each other.  One employee fell to the ground and was later hospitalized for a broken hip requiring surgery.",1
An employee's jacket sleeve got caught in a lathe pulling and twisting the employee's left arm and breaking it. The break required surgery to repair.,1
An employee was moving rollers into a truck trailer. A finger was caught in a roller and amputated.,0
"An employee tripped and fell down an escalator.  He hit a wall at the landing of the escalator, which resulted in a bilateral shoulder dislocation.",1
"An employee was positioned at the rear of a 60 ton truck crane. The crane's outrigger jacks were raised in preparation for re-positioning the crane.  As the jacks were raised the crane traveled backward approximately 5 feet. As a result, the employee's right leg was caught between the rear of the 60 ton crane and the outrigger mats being utilized by an adjacent 240 ton crane. The employee suffered a puncture wound and fracture to the right knee requiring corrective surgery.",1
An employee was operating a paddle valve in an elevated lock position on the global SCM running tool. The valve self-assisted to the open position crushing his left pinkie finger between the paddle valve and the SCM running tool frame. The employee had an open laceration as well as an open fracture that was repaired at the hospital.,1
An employee was working with the reclaimer. The valve released pressure crushing the employee's hand and amputating three fingers.,1
"On January 20, 2016, at approximately 3:15pm, a city carrier was hospitalized after falling while delivering mail to a residential home. The employee slipped and fell on ice resulting in a skull fracture and bleeding in the brain.",1
An employee was cutting pork chops using a meat saw when the bone rolled resulting in the amputation (with no bone loss) of his right thumb tip.,0
"A two-man team was adjusting an exposed metal stud wall at a new construction site. Another employee in an aerial lift located on one side of the exposed metal stud wall was on his way back down to ground level and hit a piece of electrical conduit. Upon hitting the piece of conduit, the conduit nudged the exposed metal stud wall and moved the wall. When the wall moved it amputated the left ring finger of an employee who was at ground level and on the other side of the exposed metal wall.",0
An employee was installing the frame of an atrium and fell from a plank between two extension ladders fracturing an elbow.,1
An employee was cutting wood on a table saw and amputated his thumb.,1
An employee tripped over the edge of a skid and fractured his knee cap.,1
An employee slipped on water on the floor of a patient's bathroom and fell.,1
An employee received second degree burns when pouring water into a dryer that contained hot oil.,1
An employee was using a jig saw to cut fabric and cut his left index finger.,0
An employee slipped on ice and fell while lowering the flags outside the building injuring ribs and the side of the body.,1
An employee was installing an overhead crane and fell approximately 20 feet injuring their shoulder and back.,1
A postal carrier was delivering mail on his normal walking route when a customer yelled at him and he turned to look at the customer. The customer was yelling at the carrier in a threatening way. The carrier ignored him and turned to walk away. The customer then threw a brick at the carrier striking the carrier on the head. He was admitted to the hospital for a laceration on his head.,1
"An employee was running in the production area, slipped, and struck their right upper arm against a thin 3 inch piece of metal on the side of the conveyor resulting in a laceration.",0
An employee was hospitalized after sustaining multiple fractures to the lower right leg while engaged in the un-cabling of a rail car. The employee slipped and fell while attempting to reduce the tension on the center beam ratchet.,1
An employee was hospitalized for an injury requiring surgery that occurred in the shipping department.  An employee attempted to fix a pop-out roller on the conveyor while it was still running and his finger was caught in the conveyor. The conveyor was not locked out or tagged out at the time.,1
An employee was cleaning under the pasta pre-dryer and an unguarded fan amputated one finger and injured two other fingers.,0
An employee was removing pins from the fender of an M88 A-2.  His finger was caught in the pin hole and the fingertip was amputated when the door closed.,0
"On or about January 21, 2016, an employee was installing a fixture onto a machine. As the employee attempted to adjust a locking pin that was not in place, a transfer arm moved and amputated the employee's left small finger.",0
"An employee was surveying land on an ATV. As he was in transit to a second survey point, he hit a dip in the land. He attempted to accelerate, but the ATV spun out and turned on its side.  He was hospitalized with fractured ribs.",1
"An employee was pumping wet scrape through a tank when the line became obstructed. When the employee attempted to clear the obstruction using steam pressure, the line became over-pressurized and burst, striking the employee and causing left arm and facial abrasions.",1
"An employee was trying to show a coworker the controls on a skid steer to deactivate the interlock on the fork attachment. While the employee was pointing out the disengagement button, the coworker immediately pressed it, causing the forks to lift and pin the injured employee between the fork mast and the cab. The employee suffered a fractured hip.",1
"On January 20, 2016, an employee was working in a tank with a coworker when he felt flu-like symptoms. He was hospitalized with respiratory failure after inhaling toxic chemicals, smoke, or fumes at the worksite.",1
An employee was found at the bottom of a wooden ladder with a fractured skull and left wrist.,1
An employee was moving a bundle of I-beams on a conveyor when the employee's finger was pinched and amputated under a bundle.,0
"An employee was on a rooftop installing metal. While adjusting his harness, he slipped and fell off the roof, fracturing his back.",1
An employee slipped on ice during a home delivery and broke his hip. He was hospitalized.,1
"While an employee was working on a band saw, the saw grabbed the employee's glove and pulled the left hand into a pinch point, amputating the index and middle fingertips.",0
An employee was walking through the entrance of the main office when he slipped and fell on a placement mat that had sand built up underneath it and was loosely gripped to the floor. He was hospitalized with a broken upper right arm.,1
"An employee was removing a pressurized cap from the coolant tank on an excavator when it blew off resulting in first and second degree burns to his right arm from the hot coolant. In addition, the employee jumped from the excavator in reaction to the burns and broke his leg. He was hospitalized.",1
An employee was processing vegetables on a processing line when his hand was caught between the sprocket and the conveyer belt. He suffered multiple fractures and crushed bones in his hand and thumb and was hospitalized.,1
"On 1/21/16, an employee was in a bucket truck working on a splicing box. He fell approximately 18 feet out of the bucket, breaking his shoulder and several vertebrae.",1
An employee welding a bar joist fell 13.5 feet and suffered broken ribs and a punctured lung.,1
"On January 21, 2016, an employee smelled something and became lightheaded while sorting mail into post office boxes. She was hospitalized for carbon monoxide poisoning due to a faulty heat exchanger on the building furnace.",1
"An employee slipped on ice while walking to a truck, falling to the ground and fracturing lower leg bones.",1
"On January 21, 2016, a maintenance employee was troubleshooting the heat seal machine when it activated while the employee's hand was in a pinch point. The employee's right little finger was partially amputated.",0
An employee was cutting wood on a table saw when the saw blade amputated his middle fingertip.,0
"An employee was carrying a sheet of cardboard while walking towards his work station when he tripped and fell over a raised floor (10-inch difference), injuring his head and shoulder. He was hospitalized.",1
"On January 21, 2016, an employee was operating veneer press roller while working with material that was not feeding through properly. As he attempted to push the misaligned material through the machine, is left little fingertip was pinched. When he attempted to pull his hand back, the flesh and nail of fingertip were degloved.",1
"An employee was working with a concrete core drill, coring anchor bolts from concrete, when a piece of concrete got caught in the bit. When the employee backed the drill out of the hole, his jacket became caught in the bit. The bit was turning and wrapped the jacket around itself, breaking the employee's left arm.",1
"A maintenance employee was rebuilding a valve, using air pressure to compress and seat a spring into place. The air pressure came off and the valve spring released. The employee's left-hand fingers were pinched between the spring and valve housing port, partially amputating a fingertip.",0
"An employee tripped over the leg of a coworker who was kneeling down and fell to the ground, breaking her pelvis.",1
"An employee was climbing a metal antenna tower when the tower broke. The employee fell and hit the ground, breaking back bones.",1
"An employee was troubleshooting a motor for air leaks when his fingers contacted the fan, amputating the tips of the left middle and ring fingers.",0
"On January 21, 2016, an employee was helping a coworker clear a packaging machine that became jammed with plastic bags. When he reached for a bag, his right thumb was crushed at the point of operation where the bags were cut into individual product packages. His right thumb broke and sustained tendon damage, requiring hospitalization. The machine was not locked out or guarded at the time of the incident.",1
"An employee operating a fork truck backed into a second fork truck, which had just transferred molten metal from a larger furnace to a ladle. The 1300-degree residual molten metal splashed out and contacted the employee's left foot, causing third degree burns. The employee was hospitalized.",1
An employee broke his leg after tripping over a cord. He was hospitalized and treated for the injury.,1
An employee was delivering parts to a customer's residence and was bitten on the right hand by a dog.,1
An employee was standing on a six foot folding step ladder assembling wooden forms.  The plywood that the ladder was on shifted and the employee fell 18 feet off the side of the building resulting in a back injury.,1
"An employee fell from a 3-step step ladder while hanging signs, sustaining a concussion, acute kidney injury, and lumbar injury.",1
An employee was assembling medical ophthalmoscopes using a hand-held torque driver when the torque driver slipped off of the work piece and punctured the employee's left hand. The employee was hospitalized when the wound became infected.,1
An employee was hospitalized with a head injury after falling down stairs.,1
An employee slipped on ice and fractured their hip while transferring equipment from storage.,1
"An employee was climbing down an extension ladder from the second-story roof after servicing a solar panel system. He fell off the ladder and landed on the concrete driveway, breaking his leg and wrist and requiring hospitalization.",1
"An employee was signaling a crane that was loading a forklift with steel beams. After the beams were placed on the lift, one fell and hit him on the head, breaking his neck. He was hospitalized overnight.",1
"An employee's left hand was caught and crushed in a conveyor belt, amputating his ring finger.",1
"An employee was cutting wood on a saw when his foot activated the foot pedal and engaged the saw blade, partially amputating two right-hand fingers.",0
An employee was putting files away and lost his balance falling approximately six feet off a ladder resulting in a back fracture.,1
An employee was hospitalized after being shot in the forearm with abrasive material from a pneumatic sand blaster.,1
"An employee was climbing a ladder to install a venting pipe when his hand slipped off the ladder rung, causing him to fall backwards onto the second floor deck. He fell approximately 6 to 8 feet, fracturing his left arm and breaking three ribs.",1
"An employee fell from a second floor breezeway to the ground floor of a new apartment complex while pulling a concrete hose, requiring hospitalization. Guardrails were not in place at the time of the incident.",1
"An employee was waiting for a sliced roll of paper to emerge from a paper machine winder. When the sliced roll emerged, the employee removed the side roll from the back roll and used tape to secure the side roll to the back roll. The employee then turned to get a core to place in the winder, at which time the side roll fell over, striking and fracturing the employee's lower left leg and foot.",1
"An employee was stepping down from a ramp on a food truck. When she pulled the rolling door closed with her left hand, the door slammed down and smashed her right-hand pinky finger. The finger was later amputated.",0
An employee's ring finger became caught and was smashed in a pinch point while adjusting forklift tines.,1
"An employee was repairing a ground power unit when his hand slipped, causing a severe laceration and partially amputating his fingertip.",0
"An employee was taking a conveyor off a pallet jack when the conveyor fell over and struck his leg. He was hospitalized with a broken lower leg, requiring surgery.",1
An employee was replacing the rubber skirt between the mixer and the cooler when the cooler grabbed the skirt and pulled the employee into it. His left hand was amputated.,0
"An employee was installing two jumpers on a double dead end when an arc flash occurred, burning the employee's arms and upper chest.",1
"While accessing a shelf in the storage room, an employee fell to the concrete ground and injured his right knee. He was hospitalized for surgery.",1
"An employee was placing a fiberglass beam down to be bolted to the concrete when his left ring finger was caught between the beam and concrete, amputating the fingertip.",0
"While sweeping the floor near a wire un-coiler, an employee became caught in the rotating wire, breaking a leg and requiring hospitalization.",1
An employee was struck on the back by a block machine. The employee suffered a bruised spleen and was hospitalized.,1
"An employee was machining a shaft and using sandpaper at a lathe when his right glove got caught in the machine, amputating his right middle and ring fingers at the knuckle.",0
"An I-beam rolled onto an employee's fingers, pinching and amputating the left middle and ring fingertips.",0
An employee was walking around a service counter to help a customer when her left hip hit the counter. She fell to the ground and fractured her left hip.,1
An employee tripped on a portable monitor cord and broke the right patella.,1
"An employee was shutting the door to a forklift. His fingers were caught in the door, amputating his left middle fingertip.",0
"An employee was unloading cages of poultry when the chain that carries the cages came off of the track. When the employee attempted to put the chain back on, the chain caught and partially amputated his left middle and ring fingers. The machine was still running at the time of the incident.",1
"An employee was feeding parts through a machine when his hand contacted the blade, lacerating three left-hand fingers. His middle finger was surgically amputated. The machine was unguarded at the time of the incident.",0
"An employee was operating an injection molding machine when a hand was caught in the mold, amputating two fingers. The remaining three fingers were surgically amputated.",1
"After an employee cleared jammed material from inside a slicing machine, the machine cycled and amputated the employee's right thumb and index finger.",0
"An employee was attempting to remove a build-up of saw dust in the auger when his jacket got caught in the auger and his left arm was pulled in, breaking it.",1
"While completing maintenance activities on an HVAC unit, an employee fell approximately 10 feet from the roof and fractured the left hip, requiring hospitalization.",1
An employee was retrieving snacks being delivered for a store display. The employee's right index finger was caught and partially amputated while trying to unjam a lift gate that became stuck.,0
"An employee slipped and fell on ice on the sidewalk, displacing and fracturing their knee cap and requiring hospitalization.",1
An employee was hospitalized after falling.,1
An employee sustained a hernia injury while pushing a 55-gallon drum onto a wooden skid.,1
An employee performing sanding operations on a lathe suffered a right arm amputation and left arm amputation below the elbow. The employee had reattachment surgery.,1
"An employee was emptying the dust collector on a fines hopper. After she centered the drum under the discharge, she raised her left hand to shake fines off of her hand. Her hand entered the vertical discharge chute, and her fingers contacted the rotating vanes of the rotary valve, amputating her left middle and ring fingertips.",1
"On 1/22/2016 at 12:00 PM, an employee fell through the roof of a building after stepping onto one of the skylights.",1
An employee was reconnecting a 20-pound cooling fan located 8 inches above the floor when the fan slipped and pinched the employee's right index finger between the blade and the floor. The finger was amputated.,1
"An employee was placing material into a band saw to be cut. When he activated the vise control to hold the material, his finger was caught between the material and vise, amputating his left middle fingertip.",0
An employee was uncoupling rail cars when the wheel of a railcar ran over their left foot.,1
"While operating a bandsaw, an employee caught his metal glove on the blade resulting in the amputation of one inch of his left thumb.",0
"An employee was working on the jammed chain drive of a rollup garage door mechanism when a coworker pulled on the chain. The employee's hand was pulled into the chain drive gear, breaking and cutting his right little finger.",1
"An employee was cutting the ties on stacked hay/straw bales when the upper bale came down on his head, injuring his neck, back, and leg and requiring hospitalization.",1
An employee's right ring finger was pulled into and amputated by the chain and sprocket of a running machine. The machine was unguarded at the time.,0
An employee fell and was hospitalized with a broken leg.,1
The employee was sleeping in the designated bunk area and had an allergic reaction to the linen.,1
"Three employees were installing a steel reinforcement sheet on the top of a paint line washer dry-off oven. One of the employees lost his footing and fell approximately 16 feet backward. 

He sustained multiple facial fractures, a broken arm, and a broken leg.",1
"An employee was cleaning an air handling unit when his hand was caught between a pulley and a belt, partially amputating his left middle fingertip.",0
"While an employee was cleaning a bagging machine on 1/23/2016, the employee's fingertip was caught and amputated in the machine.",0
"An employee was working at a drilling machine when the glove on her left hand was caught by the drill bit, partially amputating her left thumb.",0
"An employee was on a ladder working on a roll-off container when he fell backward approximately 6 to 8 feet, injuring his ribs and the back of his head.",1
"On 1/23/16 at 12:30, an employee was transferring a resident from one table to another in the dining hall via a wheelchair. The employee got caught on the resident's oxygen tubing and fell to the ground,  fracturing her left elbow and requiring surgery.",1
An employee's right middle fingertip was amputated to the first knuckle while the employee was cleaning the rotating blade of a bagel slicer. The slicer was unguarded at the time.,1
"An employee was installing drywall to the exterior of a building while working from a boom lift that was approximately 40 feet from the ground. A coworker got on the service elevator and went up.  The elevator made contact with the bottom of the boom cage, causing the employee's face to hit the rails of the cage. The employee was hospitalized with a fractured jaw.",1
An employee was using an electric impact wrench to tighten bolts used to secure the lifts frame. He was found unresponsive with his head caught between the frame of the lift and the frame of the building. He underwent surgery for head trauma.,1
"A maintenance employee repairing a metal entrance gate was moving a vertical fence post.  He attached one end of a rope to the post and the other end to the bucket of a skid steer vehicle.  He was standing between the post and the skid steer vehicle when the vehicle's operator lost control of the vehicle.  The vehicle lurched forward and trapped the employee's head between the post and the bucket of the skid steer vehicle, breaking his eye socket and cheek bone.",1
An employee was putting air in a tire when the tire exploded resulting in a left wrist fracture.,1
"On or about 1/23/2016, an employee was taking out the trash and dropped a metal lid on her left big toe fracturing it. She was hospitalized.",1
"An employee fell approximately 25 feet off a roof, breaking his shoulder and ribs.",1
"An employee got up on a stepladder to remove debris from inside an ~8-inch by 8-inch window opening on the chill roll machine. The employee's fingers contacted the rotating parts of the machine, amputating some fingertips (no bone loss) and requiring hospitalization. The machine was not shut off at the time of the incident.",1
"A 
Delaware City Refining Company employee was walking to his work location on 1/23/16, at approximately 1:00 AM during an intense snow event. As he was walking, he stopped on the side of the road to allow a snow-plowing pickup truck to pass and then crossed the street. The pickup truck reversed and its back bumper contacted the employee from behind, fracturing his femur. He was hospitalized.",1
An employee's left arm was injured when he attempted to stop a rolling 15-gallon beer keg.,1
An employee's left ring fingertip was amputated by a dock locking device while the employee was loading a truck.,0
An employee's right-hand index and ring fingertips were lacerated by a machine blade while the employee was threading film.,1
"An employee slipped and fell from the second-floor exit stairway, landing on the surface about 4 to 5 feet away from the ground. She hurt her head and was hospitalized.",1
"An employee was installing a part in a milling machine using an air hoist. While lowering the part the last inch, the hoist came down and the part dropped, fracturing and partially amputating the employee's right middle finger.",0
"An employee slipped and fell on ice in the parking lot, breaking her tibia and requiring surgery.",1
"While an employee was lowering a dock plate, the front flap pinched the employee's right middle finger, amputating the nail and the pad under the nail.",0
"An employee salting the parking lot slipped and fell, breaking his left arm and requiring hospitalization.",1
"An employee was installing tile flooring on the second floor of a new construction residential townhouse. The employee brought a generator inside the townhouse and left it on the first floor with the front door open, but the door was later closed by the wind. The employee started to feel nauseous and dizzy and eventually lost consciousness. He was hospitalized with carbon monoxide poisoning.",1
An employee was torch cutting a railcar at a scrap yard when the railcar's cushion unit was punctured. Hydraulic fluid spewed out and caused second degree burns to part of his back and the back of his legs.,1
"An employee fell approximately 47 inches while changing an upper ram on a BOP, fracturing ribs.",1
An employee was removing a positive displacement diaphragm pump in the wastewater treating unit when potassium hydroxide splashed the employee's eyes and face.,1
An employee suffered a broken arm after tripping over a patient's walker while distributing medication.,1
An employee was cutting shrink wrap on a pallet when he tripped over an outrigger and fractured his hip. He was hospitalized.,1
"An employee fell to the ground from the top of trailer while closing hatches, fracturing the left arm and leg.",1
"On or about 1/24/16, an employee's arm was pulled into the auger of a salt spreader while cleaning it. The employee's lower left arm broke.",1
"An employee slipped on ice in front of the building, injuring the back of his head and right shoulder and requiring hospitalization.",1
"An employee mistakenly grabbed a bottle of methanol, believing it to be a water bottle, and took a drink. The employee suffered from methanol poisoning.",1
An employee was accessing supplies in the tool crib using a three-step rolling ladder when she fell and struck her head on the floor. She was hospitalized on 1/25/2016.,1
"An employee slipped on the sidewalk and struck her head on the concrete surface, resulting in a concussion and hospitalization.",1
An employee climbed over a screen gable over a pool in order to pull a tarp down. He slipped because the aluminum was icy and fell on top of a deck chair resulting in a lower back injury.,1
"On 1/25/2016, an employee fell while using an 8-foot step ladder to install a light outside of a commercial building. He was hospitalized with a head injury.",1
"On 1/25/2016, an employee was struck by a door under negative pressure while attempting to enter it. The door slammed on and fractured her hip, requiring hospitalization.",1
"While walking a route, an employee slipped on snow-covered ice and fractured the right ankle.",1
"On January 25, at approximately 9:00 AM, an employee was descending the steps at a residence after delivering mail. The employee slipped on ice on the middle step and suffered a possible fractured ankle, requiring surgery.",1
"An employee had removed a cover for the drive belt and the exit roller so the timing could be adjusted for the inserter. His left index finger was caught between the drive belt and the rotating exit roller, and his index fingertip and approximately two-thirds of the bone were amputated. The machine was not locked out at the time.",0
"An employee was feeding a compound into an injection mold press when his hand got caught in the feeder, partially amputating his left-hand middle finger.",0
"An employee was using an overhead crane to position pipe into a steel holding area. The employee's left hand was caught between the pipe and steel structure, amputating the left thumb tip.",0
An employee was shoveling snow on the loading dock when he slipped and fell on slippery concrete. He fractured his right femur in three places.,1
"On January 25, 2016, at approximately 12:00 p.m., an employee was performing physical training when he became lightheaded and dizzy. He was hospitalized.",1
The employee went to the restroom to wash her hands and caught a finger in the door resulting in a fracture and laceration.,1
An employee was spotting for a waste management truck while it was backing up when the truck ran over and broke the employee's left foot.,1
"An employee was tightening bolts while standing on a 10-foot step ladder when the ladder tipped over. The employee fell approximately 10 feet to the concrete floor below, suffering skull, rib, and vertebra fractures.",1
"An employee had just performed a pre-trip inspection on his truck. While climbing down from the tractor, he fell approximately 4 feet and hit his head on the ground.",1
"An employee fell while stepping off of a de-limber machine after servicing the oil level.  He landed on the side of his foot, breaking his ankle and requiring surgery.",1
"An employee was reviewing blueprints at a work table in the assembly hall when a coworker bumped a piece of angle iron weighing approximately 24 pounds off the table. The angle iron fell on the employee's steel-toe boot, fracturing his left pinky toe. The injury became infected and the toe had to be surgically amputated.",0
"An employee was preparing the floor slab of a parking garage for abrasive, sand-injected water blasting. During this process, an electrical conduit was uncovered. Not wanting the water associated with the blasting process to accidentally enter the PVC conduit, the employee attempted to seal the conduit with tape. The employee then contacted a live, energized electrical conduit and was electric shocked, suffering nerve damage and leg pain.",1
An employee's right-hand ring fingertip/first knuckle was amputated by an excavator bucket while the employee was taking measurements under a tank.,0
"While an employee was climbing a scaffold, his foot slipped and he fell to the ground, breaking his foot and lacerating his head.",1
"An employee was attempting to retrieve part numbers from a compressor's fan belts to do maintenance on the machine. When the employee manually advanced the belts to better see the numbers, the compressor started up unexpectedly and caught his fingers in the pulley and belt. His left index, middle, and ring fingers were partially amputated. The compressor was not locked out at the time of the incident.",0
"On January 25, 2016, at approximately 4:30 p.m., an employee was completing rig service on the top drive. The service door was open and lowered with a winch.  The employee was positioned on the service door, approximately 8 to 10 feet above the ground, and wore fall protection. The remote for the winch developed an electrical short, causing the winch to re-spoil. This caused the door to raise back up. The employee was pinned between the service door and the top drive, resulting in two hairline hip fractures.",1
"At approximately 2:30 p.m., on 1/25/16, an employee operating a metal polishing machine lifted a curtain to wipe down the feed rollers on the machine. The employee's left-hand little finger was caught between the feed roller and the metal plate and had to be surgically amputated at the second knuckle.",1
"An employee was using a gas-powered cutoff saw to cut a 2-foot section out of a 42-inch diameter storm drain pipe when the saw kicked back. The saw blade struck and lacerated the employee's right facial cheek, requiring hospitalization.",1
"While taking measurements in the heat treatment furnace, an employee stepped onto a non-load bearing support and fell into a vat of 220-degree quench oil.  The employee suffered second and third degree burns.",1
"An employee tripped over a wire while getting up from a desk and suffered a hip injury, requiring hospitalization.",1
"An employee's fingers were crushed while fabricating metal (e.g., bending metal flashing) on a brake press machine. The employee was hospitalized overnight for surgery.",1
"While cutting lettuce in the cafeteria kitchen with a knife, an employee's left ring fingertip was amputated.",0
"An employee was using a cutting torch on a diesel trailer when the oil holding tank exploded. The employee was hospitalized with severe burns to his face, right hand, and back.",1
An employee was grinding a point on a steel wedge when the grinder pulled the employee's left thumb in and amputated the tip.,0
"An employee slipped and fell in the parking lot while going to work, fracturing the neck of the right femur.",1
An employee was moving a container in a truck when his pinky finger was caught and partially amputated between the container and truck.,1
"An employee was descending from a stationary ladder when he missed a rung and fell about 6 feet, fracturing his left tibia. He required surgery.",1
An employee was attempting to put a part on a shelf when the part hit an end cap and bounced back. He put up his arms to protect his face and the part lacerated his left arm.,1
An employee was installing solar panels using a ladder. The ladder slid on the icy floor and the employee fell 10 feet and suffered multiple fractures.,1
"At approximately 8:50 a.m. on Monday, January 25, 2016, an employee slipped on ice on the parking lot and fell. He struck his head on the pavement and was hospitalized with a concussion.",1
"An employee was removing a red oak tree (60-feet tall, 18"" in diameter) from an aerial lift unit. When the employee cut a piece of wood 8-feet long and 16"" in diameter, the piece of wood broke free, fell back, and struck the employee. The employee suffered a fractured scapula and elbow.",1
An employee was operating a milling machine while wearing gloves when the machine bit lacerated the employee's fingertip. The tip was surgically amputated.,0
"On January 26, 2016, at approximately 10:09 a.m., an employee was performing physical training when his hand began to shake. He was hospitalized for dehydration.",1
"An employee was walking on the production floor when he was struck by a forklift, injuring his left ankle and foot.",1
An employee was inspecting a trail when his snowboard became stuck in the snow. He fell forward and injured his spleen.,1
An employee was using a hook in his left hand to rotate a hog while holding a trim knife in his right hand. The knife punctured his left forearm between his wrist and elbow.,1
"On 01/26/16, an employee's right middle fingertip was amputated when the employee attempted to clear a jam in the cold bead machine.",0
"An employee was performing carpentry work from a 10-foot A-frame ladder. As he reached for something above him, the ladder wobbled and he fell off. He was hospitalized with a broken shoulder bone.",1
An employee was setting up a conference room (tables and chairs). He tripped over the tablecloth on a table and fell hitting his head against the table and the floor.,1
"An employee was using a wrench to loosen bolts when his right index finger was pinched between the wrench and a fixed pipe support, amputating soft tissue.",0
"An employee was operating the slitting machine while wearing gloves. While actuating the rollers on the slitter, the employee attempted to remove a piece of scrap. The roller pulled his glove into the point of operation, causing an open avulsion to his left thumb and an open wound to his left pointer finger.",1
"An employee was preparing a vehicle and opened the generator door. She tripped and slammed her left index finger in the door, requiring surgery.",1
"While an employee was operating a machine to cut a circular test sample, a pin in the machine broke and made contact with the employee's right index finger, amputating the fingertip.",0
"An employee walking in a locker area tripped on an elevated locker platform. The employee was hospitalized with head, neck, back, knee, and elbow injuries.",1
"An employee was nailing decking on a first floor deck. The plywood was icy, and the employee slipped and fell with his nail gun in hand.  As he fell, the nail gun discharged a long nail that punctured his right knee.",1
An employee was performing set up on a wire drawing machine when his hand was pinched between the wire and the block on the machine. His left-hand ring finger was partially amputated and his middle finger was fractured.,0
"A crane was lifting a 40-foot load with a magnet when the load struck an object. When an employee tried to stabilize the load, it fell from the magnet and struck the employee's right leg, fracturing it.",1
"An employee was walking to her desk when she stumbled on a rug, lost her balance, and fell face forward to the floor. She injured her head, left shoulder, right wrist, and right knee, requiring hospitalization.",1
"An employee was trimming brisket on the boneless meat saw when his hand slipped into the blade, partially amputating his right index finger and lacerating his right middle finger.",0
"An employee was pulling a cart (with caster wheels) that was carrying a 500-pound magnet.  The caster wheel became caught on the concrete expansion gap, causing the cart and magnet to tip and fall on the employee. His trachea was torn in half, the internal walls of his chest were injured, and his scalp was lacerated. He was hospitalized.",1
"While a backhoe was pulling dirt into a hole, it caught the wire on a nearby barbed wired fence. The backhoe pulled the wire out, causing it to strike and break the leg of a nearby employee.",1
"A employee slipped and fell on ice, fracturing his right femur and requiring surgery.",1
"While demolishing a precipitator, an employee fell approximately 33 feet to the ground below, suffering wrist and leg fractures and tissue injuries.",1
An employee's finger was pinched between a cart and table in the kitchen. The right pinky fingertip was partially amputated and reattached.,0
"An employee tripped and fell in the dining room, fracturing his leg and requiring surgery.",1
An employee placed a carbon steel tube into a hydraulic tube bender and was activating the bar clamps to hold the tube in place when the second clamp crushed and amputated three left-hand fingers.,1
"On or about January 26, 2016, at 2:45 a.m., an employee was practicing cutting a 3/4-inch steel plate on a cutting table with an oxygen propane torch when his 100-percent cotton work shirt caught on fire, causing second degree burns over 12 percent of his chest and stomach.  He was hospitalized.",1
"An employee was performing maintenance on a jar assembly machine when the machine lacerated the employee's left index finger, requiring hospitalization.",1
"An employee was driving a tug to the carousel for charging. The employee's foot became stuck, and the tug increased speed and ran into a concrete barrier. The employee's kneecap was injured by the impact, requiring hospitalization.",1
"An employee tripped over metal banding on the floor and fell, breaking his hip.",1
"On 1/26/2016, an employee became dehydrated while shoveling snow for work. He was hospitalized overnight for treatment.",1
"An employee was operating a pipe coating machine, ensuring that the product (steel pipe) was being carried through the machine as close together as possible. When he attempted to adjust a pipe, his shirt sleeve was caught between the pipe and a passive tire, pulling his right arm into the machine. His right forearm was fractured and had internal bleeding, requiring surgery. The machine was not guarded or locked out at the time of the incident.",1
"An employee slipped on snow and ice and fell on concrete, breaking the left ankle.",1
"An employee and a coworker were working on a machine's tool changer because it would not drop a tool. The coworker pushed the machine buttons while the employee's hand was in the tool changer, partially amputating his left thumb and pinky.",0
"An employee was preparing to clear snow by an entry doorway when the employee slipped on ice, spraining the back, neck, and knee.",1
An employee pulled a pallet from a stack and got a severe splinter in his right hand. The wound eventually became infected and required hospitalization.,1
"An employee was removing traffic cones from the parking lot when they slipped on ice and fell hitting their head and neck. The employee was hospitalized with head, neck and back pain.",1
"While operating a pallet jack, an employee lost control and struck a parked vehicle.  The employee's left leg was caught between the pallet jack and the vehicle.",1
"An employee saw a pallet fall off a forklift into a bin where it did not belong. He left his forklift and went over to the other forklift.  He rode the forks of the forklift to a 6- to 8-foot high elevation and retrieved the pallet. As he was riding the forks down, his right-hand ring fingertip became trapped and was amputated between the mast and the rack of the forklift.",0
"A masonry contractor was helping to move a mattress in a home owner's 2nd floor condo.  The masonry contractor did not observe that a glassed area had the glass wall removed and he fell through the open area.  The employee was taken to hospital for a broken collarbone, three broken ribs and a head injury.",1
An employee's finger was pinned between a machine part and the frame of the machine. The employee was hospitalized and received treatment for crushing injuries.,1
"While an employee was operating a drill collar clamp on a workover rig, his right pinky finger was caught between the clamp and the tubing tongs, amputating the fingertip.",0
"An employee slipped on ice in the parking lot, fell, and broke the left ankle.",1
A temporary worker operating the bacon slicer caught his right pinky in the bacon slicer. This resulted in a medical amputation of the employee's right pinky fingertip.,1
"An employee was shoveling snow from a low-slope roof when he fell through a skylight approximately 15 feet to the floor below. He was hospitalized with a severe concussion, head laceration, fractured skull, broken ribs, broken pelvic bone, broken left femur, and broken left eye socket.",1
An employee was loading pallets into a trailer using a pallet jack . Some of the pallets started to fall. His hand got caught in the pallet jack's handle when he tried to catch the falling pallets and his left index finger was amputated.,1
"An employee was being observed while performing their practical exam operating an electrically powered, stand up, 3000 lb. capacity fork lift. The employee went down an aisle as instructed and was turning the fork lift around. During the turn, the employee lost control of the fork lift and attempted to exit the fork lift.  The employee stepped onto the dock with his left foot and the forward momentum of the fork lift caused the equipment to strike his left foot resulting in crushing injuries requiring hospitalization.",1
"An employee was performing maintenance, replacing lights in ceiling fixtures that are 27 feet off of the floor. He was using a scissor lift as a working platform. A coworker operating a gantry crane struck the scissor lift, causing it to topple over and land on conveyor systems that were being built. The employee suffered right heel injuries, a head laceration (requiring stitches), a concussion, and minor contusions and bruising.",1
An employee was cleaning dishes and slipped on water on the floor and fell.,1
An employee tripped and fell in the school parking lot while walking backwards resulting in a broken hip.,1
An employee lost his balance while putting a roll on the mandrel and his fingers were pinched between a roller and threading belt. His left middle fingertip was amputated.,0
"An employee was cutting a 2x4 to size for framing. The employee was standing in approximately 1"" of water on a concrete slab. The employee was shocked.",1
An employee was installing an electrical fixture when he fell from a 16-foot fiberglass A-frame ladder to the concrete floor below. He hit his head on the floor and was hospitalized.,1
"An employee arrived at the bus yard and parked his vehicle. He started walking through an automatic gate and tripped over the track that the gate wheel rolls on. He fell and fractured his nose, broke some teeth, and displaced two vertebrae.",1
An employee was holding a chicken that was to be vaccinated when he was stuck in the right hand  by the needle gun that administers the vaccination. He was hospitalized with an infection.,1
"At approximately 08:30, an employee slipped on ice, fell, and broke his ankle while walking from a building to a truck to gather tools needed for the job. He was hospitalized.",1
"An employee reached for a box that was jammed in the ground beef burger tray former machine. When he removed the box, the machine started and pulled his hand into a chain resulting in a partial amputation of the right ring finger.",0
"On or about January 27, 2016, at 3:25 p.m., an employee was pushing a chair cart when his hand was crushed between the wall and the cart due to the cart's momentum.  His right-hand middle finger was amputated.",0
"An employee was working to replace a lightning arrester( electrical distribution work). When the tool he was using came in proximity to an energized jumper coming from the top of the lightning arrester, an arc flash occurred.",1
An employee was adjusting the chute on the T-Belt going to the FB4K hopper resulting in a fingertip amputation.,0
"An employee was installing snap ties on the outside of a three-story house's masonry wall when his coworker on an aerial lift was coming down and knocked the employee off the scaffold platform. The employee fell 6 feet to the ground, dislocating his shoulder and fracturing his proximal humerus. He was hospitalized.",1
"An employee was climbing a pole.  The employee was 10 feet up from ground level when the wooden pole broke.  The pole fell on the employee's leg, fracturing it between the ankle and knee.",1
An employee amputated a finger while cleaning ginning equipment.,0
"An employee was attempting to close the spray booth door when the suction of the spray booth ventilation caused the door to close suddenly and pinch the employee's left middle finger, amputating the fingertip.",0
"While exiting his delivery truck, an employee slipped on ice on a private driveway and broke his right fibula and tibia.",1
An employee was assisting a patient from his bed to a wheelchair. The employee bent over to adjust the bed when the patient accidentally hit and injured her face with his boot.,1
"An employee was skiing downhill when he fell and hit the hard-packed snow, suffering spinal injuries.",1
An employee was installing a metal roof on a carport when the metal trim came into contact with a power line.  The owner was electric shocked and fell off the roof breaking the right leg.,1
An employee was mopping the floor using a wooden-handle mop when a splinter entered his left finger. He was hospitalized and the finger was amputated.,1
"On January 27, 2016, an employee was injured when a small shiv of wood kicked back through a straight-line saw and punctured his upper thigh. He was hospitalized.",1
An employee suffered a hip injury while breaking up an altercation between two inmates.,1
An employee cut his right middle finger with a knife while slicing a turkey roast.,1
An employee was working on a shore power plug on the dock next to a ship to shore power crane. An arc flash occurred. The employee was burned in the face.,1
"An employee was hospitalized after his shirt caught fire while welding. The employee suffered burns to the torso, left axilla, right forearm and right hand.",1
An employee was moving construction material on the third story balcony of building 9 when the guardrail came loose and the employee fell 3 stories to the ground below. The employee was hospitalized.,1
"Employee was moving cars in a back parking lot when he slipped on ice and fell, fracturing a hip.",1
An employee was dropping muffins onto a muffin depositor tray and used her finger to wipe excess batter by hand.  The employee's middle fingertip got caught in the tray and was amputated.,1
An employee fell from an extension ladder and fractured their knee cap and dislocated their shoulder.  The employee was hospitalized.,1
"The employee was transferring hot water into bath tank #11 using a hose. The employee lost control of the hot hose and hot water splashed on to the employee causing first and second degree burns to the face, arms and thigh.",1
"The employee was helping to load a truck.  He was walking and looking at a scanner at the same time a forklift truck was backing up. The back-up alarm and light were working.  Because he was looking at the scanner, he did not see the forklift truck backing up. The right rear tire of the forklift truck ran over his left foot.  The employee was wearing steel toe shoes.",1
An employee slipped on a metal grating and broke her wrist.,1
An employee was standing outside on a wooden walkway next to an entrance door. It had been raining and the wooden walkway was wet.  The employee opened the door for a student. The student walked into the building. The door was about to slam shut so the employee twisted to grab the door and slipped on the wet walkway falling to the ground and breaking his tibia.,1
"On or about January 28, 2016 at 8:15 am, an employee performing stripping operations fell approximately 10 feet.  The employee sustained a fracture to a thoracic vertebra.",1
"An employee was knocking the steel wedge out of the rigging. As he struck the steel wedge (10lb. 6 in. long), it shot out, struck the employee in the face, and  fractured it.",1
An employee was loading a pavement roller onto a lowboy trailer. The roller got too close to the edge of the trailer and rolled over. The employee suffered head trauma.,1
An employee was installing cable from the utility pole to a house and fell off of an extension ladder fracturing vertebrae as a result of the fall.,1
An employee slipped on ice and broke his right tibia and fibula.,1
"An employee cut the truck seal with a bolt cutter and opened the trailer door. When the door was opened, three hot water heaters fell out and one of the heaters struck the employee on the head causing a neck fracture.",1
"An employee tripped over plastic banding and shrink wrap, falling to the floor and breaking the hip/pelvis.",1
"An employee was operating a spin welding machine. She placed material into the welder, pushed both start buttons, and the machine cycled. The employee reached into the machine to remove the material and the machine cycled again, smashing the employee's fingers on her right hand (middle, ring and pinky fingers).",1
An employee amputated the left index fingertip while working with a battery powered circular saw.,0
"An employee was wiping grease off a roll on the temper mill with a polish pad when the roll housing unexpectedly closed, pinning the employee's right hand between the roll and roll housing. The employee sustained a crushing injury and was hospitalized.",1
"An employee was coming into work, walking from the parking lot with a co-worker, and tripped on a 4 inch curb.  She tried to catch herself, and suffered a laceration on her forehead and a spiral break in her left arm.",1
An employee was attempting to center a winch drum spacer on a lathe. The winch drum spacer flipped off the lathe and fell onto his right foot resulting in injury. The employee sustained a contusion on upper part of right leg and had four toes amputated.,0
An employee's left thumb tip was amputated while he was guiding pallets through the process at the bucket tipper machine.,0
"An employee was operating a frozen meat grinder when a piece of meat got stuck in the shoot. When he attempted to dislodge the meat, his right index finger was amputated.",0
An employee was operating a pasta press and amputated three fingers.,0
"A mail carrier was walking on grass that was spongy and wet when both of his feet sank in. He fell forward and then fell back with both his feet still stuck in the mud. The employee was unable to bend both knees and was taken to the hospital and admitted for evaluation and treatment. Ligaments and tendons in both knees were detached. At the time the incident was reported, it was not clear whether this caused the fall or this was caused by the fall.",1
An employee was prepping a rail car for a load of peanuts when he fell approximately 10 ft. and landed outside of the rail car breaking both of his legs.,1
One employee was hospitalized after falling off a ramp at the loading dock.,1
An employee was removing an old pole to replace it with a new one. The chain that was holding the old pole was out of center. The employee grabbed the pole and he was lifted. Then he fell from the pole and landed on the outrigger of the truck. The employee was hospitalized for chipped vertebrae in his back.,1
An employee had an asthma attack as a result of paint fumes.,1
An employee clocked out and was leaving the plant for the day.  The employee got into a physical altercation with another employee who struck him in the face resulting in a broken jaw requiring hospitalization.,1
"An employee slipped on ice and fell, hitting his head.",1
"An employee was showing the cleaning contractor where they would be cleaning at the facility.  He opened the hatch to a chute. He pulled on the hatch with his left hand and placed his right hand on the lip of the chute to get more leverage.  His left hand slipped from the handle and he tried to pull  his right hand out of the way, but the fleshy part of his thumb was caught between the hatch lid and the chute lip resulting in a fingertip amputation.",0
An employee was placing auto bumpers into a bin when a forklift with a cage struck the employee's right leg.,1
An employee was using sulfuric acid drain cleaner to unclog a bath tub drain.  He felt burning in his eyes and throat.  He left the apartment and was transported to the hospital with breathing problems.,1
Employees were removing equipment and debris from a roof. The Skytrak was raised for equipment and debris to be placed on the forks. The injured employee grabbed the forks. The forks came down while the employee was holding on to them and smashed his left hand fingers between the forks and the catwalk.,1
An employee was injured on 1/29/16 when the crane gave away underneath soft ground and pinned the employee's right leg underneath the outrigger. The wooden mat was broken.,1
"An employee was lubricating equipment.  He was using a rag to clean lubricant from the PT4 conveyor.  The rag was caught in the chain and sprocket, which pulled in the employee's left hand crushing the middle finger in the chain and sprocket. The finger was amputated at the first knuckle at the hospital.",0
An employee was using a drill when his glove contacted the drill and/or drill bit and amputated his right second digit.,0
"An employee was working from a rolling step ladder when he lost his balance and fell, striking his head on the concrete floor.",1
"On January 29, 2016, an employee was closing the door to a 30-yard industrial roll-off container when the employee's right middle finger was caught between the door and the latching mechanism. The finger was partially amputated.",0
"An employee attempted to correct log material (cants). As he lifted a 6"" cant, it slipped and smashed his fingertip between the cant and the chain. His fingertip was amputated.",1
"An employee was preforming drywall taping and working from a baker scaffold when he fell off, breaking three ribs and potentially puncturing a lung.",1
"On January 29, 2016, an employee was attempting to unjam the nailing machine when a coworker started the machine. The employee's hand was dragged through a chain and sprocket, amputating the right  middle, ring, and little fingers.",0
An employee went into a 15-feet-deep trench to test if the cables were energized when the trench collapsed. The employee was crushed by the dirt and was hospitalized.,1
" An employee slipped and fell on ice in the company parking lot, fracturing his right tibia and fibula.",1
"An employee was troubleshooting a piece of machinery that was not working properly. When the employee tried to check the tension in the chain with his left index finger, the chain pulled his finger into the chain and sprocket, amputating his left index fingertip. The machine was unguarded and running at the time of the incident.",0
"An employee fell in a ditch while walking his rounds, suffering a rib fracture and contusion.",1
"Employee was walking down the stairway after cleaning her work area when she lost her footing and fell down the stairs, severely injuring her backside. She was hospitalized.",1
"An employee was participating in annual emergency egress aircraft training. The toe of the employee's left boot caught the top portion of the inflated slide, causing the employee's leg to bend slightly at the knee. As the employee landed on the emergency egress slide, the left leg became wedged under the body and twisted. The employee's left leg and foot were fractured, requiring hospitalization.",1
"An employee was getting up from a chair when the chair broke, causing the employee to fall and injure his right ankle.",1
"On 1/29/2016, an employee was attempting to dislodge a rolling bay door when he fell approximately 12 feet, fracturing his left leg.",1
Employee was hospitalized after burning his legs while welding structural steel. Hot slag caught the acetylene tank on fire.,1
"An employee was troubleshooting an overhead crane from an approximately 30-feet-high scissor lift. The crane hit the scissor lift and knocked it over, causing the employee to fall and fracture his shoulder and hip.",1
"At approximately 9:50 a.m., an employee slipped on icy steps and fractured the right ankle while delivering mail.",1
An employee went into the cotton compress pit and climbed a ladder up to two press boxes.  The press boxes are 24 in. wide x 48 in. long and held together by a bar between them.  The press box rotates before it compresses the cotton.  There is an 8 inch opening and the employee's arm got caught in that opening.  As the press box began to rotate it tore part of his arm. The employee was able to pull his arm out and was transported and admitted to the hospital. His arm was amputated at hospital.,1
The employee had completed the work operation and was shutting down the crane.  The employee was asked to check the control switch located on the crane's turn table. The employee's finger got caught in a slot where the switch was located and the crane engaged and started to turn. The employee's left middle finger was crushed. It was later amputated at the first knuckle at the hospital.,0
"The Zamboni driver was shoveling shaved ice off of the ice rink.  While shoveling the shaved ice, the driver slipped, fell, and fractured his hip.  The driver was hospitalized and will undergo surgery.",1
"Three workers were setting a cast iron tree grate in place. Two lifted the grate while a third placed wooden block underneath to prop it up. When the grate lowered, a worker's finger was caught between the grate and the block, resulting in the amputation of the right little finger from the fingertip to the second knuckle.",0
"An employee was descending an air enclosure roof when his foot slipped and he fell off the roof. He hit structural steel as he fell, fracturing his upper left arm and left shoulder and suffering brain bleeding.",1
"An employee was attempting to pump water into a natural gas line. After he was given the ""all clear"" sign by the pipeline supervisor, he opened a water valve and was instantly struck and injured by pressurized water. The gas line was not de-energized at the time.",1
An employee was pushing a pallet off of a truck when his right foot was caught between the truck and dock. His foot broke and required surgery.,1
"An employee was working on the electrical circuit on pole lights when the equipment arced, burning his hands and requiring hospitalization.",1
"An employee was removing chuck from a lathe machine. When he operated the machine hydraulics by stepping on the foot pedal, the chuck did not dislodge completely. As he was troubleshooting the problem on the chuck, the machine was activated by the foot pedal. This caused the chuck to move back inside the machine, amputating is right-hand middle and ring fingertips.",1
An employee was struck by a vehicle that was being driven off the car wash production line. She was hospitalized overnight with injuries to her legs.,1
"An employee was using a pry bar to guide the base of a jib crane over the bolts in the floor. The base was suspended by straps attached to a forklift. The base slipped in the straps and pinned the employee's right hand between the pry bar and the floor, breaking his right index finger and requiring hospitalization.",1
"An employee was on the second or third rung of a ladder, attempting to fix and roll up an overhead door.  He lost his balance and fell to the concrete floor, suffering broken ribs, a broken wrist, and head and eye injuries.",1
"An employee was working from a ladder to put a box on top of a fixture. He fell off of the ladder to the ground, where a customer found him laying unconscious. He injured his head.",1
An employee's left pinky finger was amputated at the last joint while he was using a horizontal press/trimming machine.,0
"After checking a package, an employee turned around and started walking. A forklift stopped short near her, and she tripped over the forks or lost her balance and fell, injuring her knee.",1
"On January 31, 2016, at approximately 1:00 p.m., an employee was using a fryer to fry chips when the glass from the thermometer exploded and went into the employee's right eye. The employee was hospitalized and had surgery.",1
"An employee was setting the gap on the granulator blade. When the employee rotated the rotor, the employee's left-hand middle finger was partially amputated (approximately 1/8 inch) by the rotor blade.",0
"While raising up in a lift to repair loose pipe insulation, a maintenance employee was struck in the head by a ceiling fan blade, suffering a skull fracture.",1
An employee's right middle and ring fingers were amputated when his hand became trapped between cooling rolls while checking for defects in the web.,1
"On January 31, 2016, an employee was hospitalized due to static shock that occurred while loading clean plastic flake into a silo from the overflow bag.",1
"On January 31, 2016, an employee was hospitalized with a fractured tibia after falling into a pit in the foundry.",1
"While lifting a patient, an employee sustained a back injury.",1
"An employee was getting ready to reposition portable source lights using a material lift cart.  He picked up the front of the lift. As he twisted around, he turned/rolled his ankle and it gave out. He suffered torn ankle ligaments.",1
An employee was holding a concrete form stake when a coworker struck and crushed the employee's right thumb with a sledgehammer.,1
"On February 1, 2016, an employee was performing maintenance on a crushing machine when the rotary blow bars spun and pinched the employee's foot. The employee was hospitalized with broken foot bones.",1
"An employee was walking on a catwalk to inspect the current job progress. While inspecting bolts, the employee fell 20 to 25 feet through the grating into a 2-feet-deep pool of water. The employee sustained rib and vertebrae fractures, a heel fracture, and a punctured buttock.",1
An employee injured the left hand with a spray gun.,1
"An employee was delivering a pizza to a private home.  After he delivered the pizza and collected the cash, he walked back to his vehicle.  Prior to entering his vehicle, the employee was shot in the bladder and was hospitalized.",1
"An employee was adjusting the weaving machine, which was de-energized, when his right pinky finger was caught in the sector gear. His fingertip was amputated (no bone loss).",0
"An employee was walking to an enclosure to collect the trash that was in it. While walking, he slipped and fell on the ice and snow. When he landed on the paved parking lot surface, he fractured his patella and severed some tendons, requiring surgery.",1
"An employee was attempting to connect the cables for an LED light fixture when he received an electrical shock, suffering burns to his hands. He was hospitalized for treatment.",1
An employee's gloved left hand became entangled in a rotating metal drill bit/chuck while he was trying to sweep off metal shavings from around the drill bit. His left ring finger was surgically amputated.,1
"An employee was working at the front desk when she tripped and fell, breaking her arm under the shoulder socket. She was hospitalized.",1
"An employee was working from the fifth floor, installing a 28'/2300-pound window with a hoist. The employee's finger got caught underneath the window and was partially amputated, requiring surgery.",1
"An employee was on a lift installing sheet metal at a job site when he fell off the lift and landed between two pieces of equipment, breaking his ribs.",1
An employee fell approximately 6 feet while dismantling scaffolding at a jobsite and was hospitalized with a fractured right foot and lower back injury that required surgery.,1
"An employee was helping to install ground pipe in a deep trench. He was outside of the trench box on top of the 60-inch, pre-cast pipe form and bracing pipe. A back hoe operator was attempting to move the trench box when a portion of it made contact with the employee's left foot, crushing and breaking it.",1
"On February 1, 2016, an employee was unloading parts from a conveyor when the conveyor stopped because a part was stuck upstream. The employee attempted to retrieve the part when a piece of steel began to index, got caught, and pinched her finger. Her right thumb was amputated.",0
"An employee was climbing a ladder to mount ductwork into the ceiling tile. When he shifted his body on the ladder, he twisted his knee. He experienced knee and lower leg swelling, and was hospitalized with an infection.",1
"An employee slipped on ice in the parking lot, breaking an ankle.",1
"An employee attempted to walk around a downspout in the parking lot. When she stepped down from the sidewalk, she slipped on ice and fell, fracturing her right ankle.",1
"An employee was descending a 12-foot attic ladder hen he slipped and fell approximately 4 feet, breaking his left leg below the knee.",1
"An employee was stepping from a ladder to the metal roof when he slipped and fell 11 feet, fracturing his left femur. He was not connected to a fall protection system at the time.",1
An employee's right index finger was partially amputated after becoming caught on a trailer door handle.,0
"An employee was placing plastic on an inclined feed conveyor when the metal detector identified metal contaminants and automatically stopped the conveyor. The employee walked up the conveyor belt to extract the metal material from the plastic and then began to descend. While walking down the conveyor, the employee slipped and fell, striking his rib cage against the metal conveyor wall. He was hospitalized with fractured ribs.",1
"A worker cut a 4-foot x 6-foot x 5-inch piece of concrete slab from the operating floor, which fell toward the barricaded area in the basement. As the concrete slab fell, it struck a piece of equipment and was deflected to an area outside of the barricade. The slab then struck an employee standing nearby, lacerating the employee's leg.",1
"An employee slipped on black ice while walking in the company parking lot, suffering a broken lower left leg.",1
"An employee was attempting to unload goods from his delivery truck when he fell approximately 3 feet off the back platform onto the concrete parking lot (ground). He was hospitalized with multiple fractures to the skull, ribs, shoulder, and hand.",1
"On 2/1/2016, at 8 a.m., an employee was holding the end of a beam being lowered by a crane. The beam bumped into a column and pinned the employee's hand, amputating the pinky finger.",1
"An employee was changing an air filter from an A-frame ladder.  The employee was on her way down from the ladder when she missed the last step and fell to the ground, fracturing her right hip.",1
An employee was trying to unjam the dumpster on a forklift when the forklift struck the employee's hip. The employee required hip surgery.,1
"An employee was loading materials while standing on a flatbed trailer. The employee stepped backwards off the flatbed trailer and fell 4 feet to the ground, sustaining bruising and possible spine damage.",1
"An employee was moving a roll of paper with a pallet jack when his left foot was pinned between a piece of angle iron and the pallet jack, fracturing four bones.",1
"In February 2016, an employee was injured while repairing a loader.  The loader was turned on and the employee tripped and fell into the moving parts. The employee sustained two broken bones and skin lacerations on the left arm.",1
An employee fell 10 feet off an unprotected edge and fractured his left ankle.,1
A maintenance employee was cutting 36-inch pipe with a cutting torch when his right hand was crushed between the pipe flange and the cutting table. The employee was hospitalized and had surgery.,1
"On or about February 2, 2016, at 3:00 p.m., an employee was attempting to initiate an in-person survey at a private home when the employee slipped on ice located on the home's porch, fell on a knee, and fractured the left fibula.",1
"An employee was loading a tractor trailer when the tractor trailer unexpectedly pulled off while he was still inside. He fell approximately 5 feet from the rear of the trailer to the asphalt ground below and landed on his face. His face and chin were lacerated and/or abraded, requiring stitches.",1
"On or about 2/2/16, an employee was cleaning a laminator machine with a brillo pad in his gloved hand when the laminating roll, which is hot and sticky, caught his glove and pulled his hand into the rollers. He was hospitalized with burns and a fracture.",1
"While using an oxy-acetylene torch, an employee tripped over the hose and fell, breaking the thigh bone.",1
"An employee slipped and fell on ice while walking to her car in the parking lot, fracturing her right tibia.",1
An employee sustained burns to the side of the face and neck after coming in contact with heavy oil while unplugging a bleeder valve.,1
An employee tripped on a curb while walking in the parking lot. The employee's left hand was lacerated.,1
"On February 2, 2016, a maintenance employee was checking the photo eye on the panel saw. As he checked the eye, the program fence released and crushed his right ankle between the fence and a pressure beam. He was hospitalized.",1
"While walking to the building, an employee slipped on a patch of ice in the parking lot and broke her left leg. She was hospitalized.",1
"An employee was helping with ground work when a strap holding an auger to a truck broke and the auger swung free, hitting the employee in the head. He was knocked unconscious and was hospitalized with a head laceration. The employee was wearing a hardhat at the time of the incident.",1
"An employee was helping an aerial access driver load multiple mobile light plants that were off-rent onto an aerial access trailer. The employee was bent down in a squat position, attempting to adjust the tongue of a mobile light tower, when the aerial access driver put his back against the rear light plant and shoved it forward. The employee's index finger was caught between the transport trailer deck and tongue of the mobile light tower, amputating the left index fingertip.",0
"A fire extinguisher fell while it was being serviced, striking an employee in the face. The employee was hospitalized.",1
"An employee was retrieving a part from an order when her foot got caught in a plastic strap, causing her to trip and fall. She fractured her femur (right leg) and was hospitalized.",1
An employee's left ring finger was partially amputated after being struck by a sledge hammer while the employee was repairing a 34-inch pipeline.,0
"An employee was moving a finished part (a pipe) that was coming down the conveyor of the roll former machine. The pipe became jammed, flew up, and hit the employee in the neck. The employee was hospitalized with a neck laceration.",1
An employee was laying a metal deck with another employee when he lost his footing and fell approximately 20 feet over the leading edge. He suffered several fractures to the back and neck bones and a gash on the side of his head.,1
An employee was climbing up or down a scaffold ladder when he fell approximately 14 feet and broke his leg.,1
An employee was working on an adhesive machine when the adhesive paper stuck to the employee and pulled him into the machine roller. He suffered a potential collarbone fracture and other injuries.,1
An employee was cleaning a plastic recycling line when the fan blades inside the machine hit and partially amputated the employee's right index and middle fingers. The machine was not locked out at the time of the incident.,0
An employee and client were horse playing by doing flips when the employee fell to the ground and broke her left arm.,1
"An employee was gathering parts from a conveyor, placing them in a hamper on an adjustable work table. The employee moved the knee-high work table and then tripped over the cord, which was stretched and above the floor. She fell to the floor, fracturing her left femur below the hip joint.  She was hospitalized for surgery.",1
"An employee used lacquer thinner to clean the lid of a glue pot over a barrel.  He then used a heated putty knife to clean the remaining glue from the lid. When the knife touched the lid, the fumes and thinner caused the lid and barrel to flash and catch on fire. The employee suffered first degree burns on his face and left hand.",1
An employee was operating a shear to cut metal when the shear's control activated while the employee's hand was in the point of contact. The employee's right middle finger was amputated (half an inch) by the blade.,0
"An employee was vacuum filtering a 49-percent hydrofluoric acid solution in a lab hood when the hydrofluoric acid was pulled through a vacuum pump during filtration. The employee inhaled the fumes, and her right ear and head were contacted by the solution.",1
"On 2/2/16, at 9:45 a.m., an employee was pouring hot water from a bucket into the sink when hot water contacted the employee's right leg. The employee suffered 3rd degree burns from the knee to the ankle and was hospitalized.",1
An employee was removing bolts from the bottom of a cylinder bottom core when the core fell and struck the employee. The employee sustained a compound fracture to the upper right arm and a fractured right thumb.,1
"While walking from a vehicle to the office, an employee slipped on wet snow and fell to the ground on the driveway incline. The employee suffered a compound fracture to the right ankle, requiring surgery.",1
Two employees were removing sheets of plywood from old shelving when a piece about 3' by 6' slipped. The injured employee's right pinky fingertip was caught against the plywood and the skin tore off (no bone damage) within the employee's glove. The employee was hospitalized.,0
"An employee was talking with a powered industrial truck (PIV) operator who was unloading a vehicle. As he walked back to his office, the PIV operator reversed the PIV and hit him, knocking him to the ground and running over and fracturing his left foot/ankle. He was hospitalized.",1
An employee was operating an electric pallet jack when he lost control and was pinned between the jack and a metal storage rack. He suffered lacerations and a muscle injury to his lower left leg.,1
An employee was handling glass panes when the glass shifted and fell on the employee resulting in injury that required hospitalization.,1
"An employee was standing on a 10-foot A-frame ladder, changing a motor inside a dropped ceiling's air handler. He fell off the ladder, fracturing his right upper arm and his right wrist.",1
"A 2,200-pound, 6-inch-wide steel coil fell over onto an employee's leg.",1
"While working on a painting assembly line, an employee was injured when an automated door closed as the employee was trying to pull out a part. The employee suffered broken ribs.",1
"An employee was doing a machine die rotation on a brake press when the die slipped out of place and fell onto the employee's left middle finger, amputating the fingertip.",0
"An employee was helping to install a marine loading arm.  As he stood near the base of the loading arm, the weight shifted and struck him, causing his right-hand index finger to be caught and amputated between the base of the loading arm and a piece of pipe.",1
"An employee was leaving work, slipped on ice and fell in the parking lot breaking the right hip.",1
"On Wednesday, February 3, 2016, an employee was getting into the passenger's side of an aerial lift truck when he slipped on ice. He attempted to grab the side of the truck, and a ring on his left ring finger got caught on a bolt on the side of the aerial lift. His left ring finger was amputated.",0
"An employee was just finishing up loading a barge. The employee was on the barge to unhook the back cable attached to the tug at the back of the barge. The employee was walking toward the front of the barge and the cable line sprang up to chest height. He continued to walk to the front of the barge to get out of the cable's way. When he was toward the front corner, he swung his leg around and over the timberhead.  Just as his leg was going over the cable, the cable pinned his leg between the cable and the timberhead breaking the lower leg.",1
An employee choked on a piece of chicken while testing food for a new menu.,1
An employee was walking down a flight of stairs to the basement while carrying equipment in his hands. He tripped and fell fracturing five ribs and chipping vertebrae.,1
An employee was troubleshooting equipment and suffered an amputation.,0
"On February 3, 2016, at approximately 4:30pm, an employee was injured while attempting to restrain a patient who became irate and physically aggressive.  The security officer was hospitalized for a concussion.",1
"On February 3, 2016, an employee was hospitalized with a fractured right leg after being pinned between a walkie lift and a stack of pallets.",1
"An employee was performing maintenance functions on board an aircraft.  The employee manually reclined a passenger seat back and raised the foot rest to inspect under the seat.  Using his right hand, the employee pulled on the manual release mechanism to lower the foot rest, not realizing that his left thumb was between the foot rest support structure.  As the foot rest was released, it automatically dropped to the folded position, severing off the employee's left thumb at the first knuckle (approximately 1"").",0
"On February 3rd, 2016, an employee was adding chlorine to the water and received chemical burns to the gastrointestinal tract from breathing in the chlorine gas.",1
"An employee was transporting a swivel from one side of the shop to the other. As he was getting ready to lower the swivel to connect it to another machine, the bottom part dropped onto his right pinky finger. The employee was transported to the hospital where his finger was amputated.",0
"An employee was operating the T-80 Kauffman Tapper machine. When he reached into the machine to clear a shaving, he bumped his hand on the spinning tap and suffered a partial amputation on the right index finger involving skin and flesh with no bone loss.",0
"An employee was fabricating a bracket and sharping a piece of metal on a belt sander. The metal bracket slipped out of his hand, rotated and sliced the top of his left thumb.",0
Employee was descending a six foot self supporting ladder and slipped and fell to the ground resulting in a strained knee and wrist.,1
"Employee was walking on a sidewalk outside the office when he slipped on black ice and fell to the ground, breaking his right femur and suffering head trauma.",1
A worker was pressure washing concrete slab. The hose became kinked. During the process of un-kinking the hose the spray wand slipped and made contact with the worker's hand just enough to actuate the water spray. The nozzle which was very close to the worker's right leg sprayed high-pressure water into the worker's calf. The action caused a pin-prick sized hole that was quickly filled with water and air. The laborer was admitted to the local hospital.,1
An employee was spraying water on the floor to clean up in the prepared food department when she tripped over the hose and fell to the ground.  The employee sustained a right hip fracture.,1
"Employees were removing the panel cover on a vacuum pump when there was an arc flash. An employee was hospitalized for burns to the face, head, arms, eyes, and hands.",1
"An employee was performing maintenance on the trough machine.  The guard was removed to ensure the machine was operating properly. One of the troughs fell out of the machine and activated the micro-switch, which activated the machine cycle.  The employee's left forearm was caught and injured in the machine.",1
An employee slipped and fell while entering the cafeteria suffering a broken knee cap requiring hospitalization.,1
An employee suffered electrical burns to the right hand while making adjustments inside a generator when it was turned on by another employee.,1
The employee was working on an elevated platform (scaffolding) removing form boards from a new concrete structure.  The employee was tied off to a form board that had been taken apart by mistake.  The form board fell 15'-20' to the ground pulling the employee to the ground with it. The employee suffered a fractured leg.,1
An employee was operating the Pierce and Prime Line. A primer got jammed in the line and the employee used a tool to try and unjam the line. The tool set off the primer and the adjacent primers causing a minor explosion. The employee was hospitalized with abrasions and lacerations to their face and body.,1
"An employee was hospitalized after being pushed to the ground by a customer resulting in a broken hip, clavicle and ribs.",1
"An employee was struck in the head while removing a concrete form used to manufacture burial vaults. The form was being removed when a bar swung and hit the employee in the head, knocking him to the ground. The employee was standing on the floor at the time and was wearing a protective helmet. He was hospitalized after being knocked unconscious with a cut to the head.",1
"An employee was opening the top hatches on railcars when he slipped and fell to the ground, striking his head.",1
An employee fell off a ladder and hit his head.,1
"An employee was using compressed air to remove sawdust from resaw and amputated the right thumb, index and middle fingers.",0
The employee was cutting shank meat using a band saw and amputated the fleshy tip of the right ring finger. The fingertip was reattached by outpatient surgical procedure.,0
An employee was loading a semi trailer with product using a pallet rider. She got pinned between the pallet rider and the wall of the semi resulting in a fractured pelvis.,1
A temporary employee was operating an automatic welder and attempted to clean the weld heads while the machine was still in operation.  The left ring finger was amputated to the first knuckle and the left pinky fingertip was also amputated.,1
An employee engaged in painting operations for large tractors became entangled in the equipment and suffered a distal forearm amputation. ,1
A temporary employee was removing reject logs from the line 5 conveyor belt when he got his finger caught-in the drive chain sprocket and suffered an amputation of the right middle fingertip.,0
An employee suffered a left ring finger amputation when loading a damaged vehicle onto a tow truck.,0
An employee unloading shingles from a truck suffered a fall that lacerated the spleen and required hospitalization.,1
An employee was finishing up concrete when concrete got into the top of the employee's boots and burned both feet.,1
"An employee was walking across the street to terminal B at KCI and fell, striking his face. The employee was hospitalized with contusions to the face and arms.",1
An employee was cutting metal on the shear machine and amputated the left ring fingertip.,0
"An employee was delivering sheet rock to a new residential home. While unstrapping a metal cart from the truck, it rolled off and struck the employee on the head and shoulder. The employee was hospitalized.",1
An employee was working on the 5 inch pizza dough press. She reached her hand into the machine to clear some debris on the belt and the die cycled amputating the tip of her right ring finger.,0
An employee was operating the winding machine and knelt down to get a better view. His knee gave out and he fell forward extending his hand to brace himself. His hand contacted the machine blade and amputated the right middle finger.,0
An employee suffered a broken right leg resulting in in-patient hospitalization after falling from a 12 inch platform.,1
An employee was working with the basket mill in the production area and severely lacerated his left thumb. The employee was hospitalized and received surgery on his finger.,1
An employee was picking up steel and dropped a 70lb. piece onto his left foot. The employee was hospitalized with a contusion on the left foot requiring surgery.,1
An forklift operator struck another employee in the aisle way and injured the employee's right leg. The injury resulted in a mid-calf amputation of the right foot.,1
An employee was attempting to remove a pressure washer tip on the pressure washer while it was running. High pressure water was injected into the employee's palm and left middle finger. The employee was hospitalized.,1
"On or about February 4, 2016, an employee was operating a crane and lifting a bundle of wire mesh.  The employee was underneath the raised load when the load fell, fracturing the employee's femur, pelvis and face.",1
An employee was operating a burden carrier in reverse and caught their left foot between the carrier and a steel beam resulting in a fractured lower left leg.,1
"An employee was pinned between a semi-trailer and a dock door resulting in a crushed pelvis, fractured vertebrae and internal bleeding that required hospitalization.",1
An employee was rolling an oil drum off of the back of the truck when he slipped and fell to the pavement below.  The driver was found unconscious. The employee was hospitalized with traumatic injuries to the C-5 and C-6 vertebrae that will require surgery in the future.,1
"On February 4, 2016, an employee was hospitalized due to an injury to the left hand requiring surgery. The employee was changing the tip of a spray gun and paint was injected into his palm.",1
"An employee was loading laundry and a large load of laundry fell onto his leg, fracturing it.",1
"On 2/4/2016 at approximately 3:15 AM, an employee fell approximately four feet while climbing down a ladder and fractured a hip.",1
An employee was washing trucks inside a wash bay and began to feel light headed. The employee was hospitalized due to CO exposure. It was determined that the cause of the CO was an improperly installed vent pipe on the newly installed pressure washer system.,1
"On February 4th at approximately 2:00 PM, a maintenance mechanic was repairing a broken chain on a debarking/log cutter machine.  A compression roller (log holder) came down and pinned the employee.  The employee was hospitalized with two broken vertebrae requiring surgery. The machine was not locked out at the time of the incident.",1
An employee was trying to put a bit in a lifting rig for transport via a trolley crane. As he was extending his right arm it made contact with a sharp edge of the bit causing a laceration to the right forearm. The bit weighs approximately 50 pounds is 12 inches in length and 18-24 inches in width.,1
A temporary employee suffered a broken lower leg when a large steel coil tipped over and fell onto his right leg.,1
An employee was cutting turkey with a knife and severed the tip of her left thumb.,0
A crane operator was stacking concrete slabs. A slab on the stack slid and struck another employee on the ground in the left thigh area. The employee was hospitalized due to deep laceration to the thigh requiring surgery.,1
An employee was working on a rail car opener when the employee's safety vest became entangled on the rotating shaft pulling the employee in and breaking bones. The employee also lost consciousness.,1
An employee was positioning a loading dock leveler. The dock leveler's hinge sprung open and severed the employee's left middle and ring fingertips.,0
An employee suffered an amputation injury when a skid kicked back on a band saw causing two boards to fold together pinching his finger.,0
An employee suffered a fracture to their left arm when it was struck by a falling draft gear weighing approximately 250-300 lbs.  The employee was using wooden blocks to stabilized the piece in preparation for welding operations when the piece fell off the wooden blocks and struck the employee.,1
"While performing pump repairs, an employee got his right middle finger pinched between the coupling extender on the pump and the discharge piping flange resulting in amputation of the right middle fingertip.",1
An employee had just completed ripping a piece of wood stock when he changed the process and began to shave it.  While in the process of shaving the wood block it kicked forward causing the employee's hand to move forward into the rotating blade. The employee sustained an amputation injury to the tip of his right thumb.,0
"A pizza delivery driver was robbed, shot and beaten at approximately 7:50 pm February 4, 2016.  He was hospitalized.",1
An employee was working in the saddle pack department taking product off the test line when the actuator activated and amputated the tip of his left thumb.,0
"An employee was working on a Ferris wheel because a sweep was not lining up properly.  As the crew was working to line it up, it let go, crushing the employee's fingers on the right hand.",1
"On February 4, 2016, at approximately 4:00pm, an employee was operating a Ryder pallet jack in a 9'10"" wide aisle way.  He passed a second employee operating another pallet jack in the opposite direction.  The load of pallets on the second employee's pallet jack struck a guardrail causing a pallet to fall onto the employee and lacerate his right calf.",1
"In the afternoon of February 4, 2016, two employees were 
lifting a concrete pole onto a truck using a crane when another concrete pole on the ground rolled away from the stack and struck one of the employee's lower left leg and foot. The employee was hospitalized for medical treatment.",1
An employee delivering mail was bitten by a dog on the right thumb and forearm. The injuries required hospitalization.,1
An employee working from a ladder at an elevation of approximately 8' fell from the ladder onto a carpeted floor and struck his head and back.  He was admitted to the hospital with a skull fracture and cranial bleeding.,1
An employee had completed performing maintenance work on a piece of equipment and was in the process of lowering the JLG with a crane. The thumb of his right hand was caught in the line that was being used to lower the JLG removing muscle and tissue. The employee was transported to the hospital where his thumb was removed above the knuckle.,1
"The employee was getting out of his truck, slipped on snow-covered ice on the ground and fell breaking his pelvis.",1
"A maintenance employee removed the fuel tank from truck, set it on the ground and then began pressurizing the tank to located an air leak.  A portion of the tank exploded from being over-pressurized. The employee sustained facial injuries and damage to the left arm.",1
"The employee was working from the 6th rung of an 8' ladder.  He removed a strap from a pipe containing conduit which had tension on it.  When he removed the strap, the force slung him off of the ladder and onto the concrete below. The employee sustained a fractured hip.",1
"An employee was working on a board stacker. One of the boards went in crooked and when the employee tried to straighten it, his right forearm was caught in the machine.",1
"An employee was cleaning the blender auger and slipped and fell, hitting the framework of the equipment and fracturing ribs. The employee was hospitalized.",1
"The injured employee was part of a crew that was off loading a barge of 10' scrap pipe encased in concrete.  One of the joints was not lying straight, so the injured employee stood on top of the pile of pipe kicking it in order to roll it into place.  It rolled into place, and when it moved, he fell and another piece of pipe rolled up onto the back of his leg fracturing it.",1
An employee was admitted to the hospital with a fractured femur after being struck by a piece of metal.,1
An employee was hospitalized after their right arm was injured while reaching into an agitating hoper.,1
An employee was lifting a bundle of bars with an overhead crane.  The employee was steadying the load with his ungloved left hand.  The load of bars shifted and pinched his finger.  The employee suffered a partial amputation of his left ring finger.,0
An employee suffered an amputation when he reached into the running dry tip machine.,1
"On February 5, 2016, an employee was using a table saw with a circular saw blade for cutting wood. The employee sustained a severe cut to his left hand thumb that was surgically amputated at the hospital.",0
The employee was working off an 8 foot step ladder to replace a light bulb in an outside fixture. The employee fell off of the ladder and was hospitalized with a concussion and head/face trauma.,1
"An employee walking down the stairs lost her balance and fell down the stairs, breaking her leg. The employee was hospitalized.",1
An employee was trouble shooting the bar sealer. The employee's hand triggered the optics resulting in a partial amputation of the right middle finger.,1
"On 02/05/2015 at approximately 1:00 p.m., an employee was operating a plate punch ironworker machine.  A piece of steel jammed, and he tried to dislodge or unjam it from the machine.  The tip of his left index finger was pinched by the machine resulting in the loss of the fingertip and some of the finger nail.",1
"On February 5, 2016, at approximately 12:30pm, an employee was injured while operating a full revolution mechanical power press.  The employee was transferring can parts into a redraw die. Two fingers on his right hand became trapped between the can part and the working die as he removed the can part from the machine, resulting in a partial amputation of the middle and ring fingers.",0
An employee working with a table saw attempted to move material away from the blade and contacted the saw blade resulting in the amputation of one finger and laceration of three fingers.,0
An employee was operating an order picker and was struck by furniture when it fell from the order picker and pushed the employee into a mesh guard. The employee was hospitalized with a traumatic brain injury with loss of consciousness and a laceration above the right eye.,1
An employee was working at a computer desk at the nurses station.  The employee stood up and walk two or three steps and fell fracturing the left femur.,1
The injured employee was working with other employees to rig and lift a bridge beam for transport. The bridge beam was frozen in the ice/ground.  When the beam was dislodged it struck the employee resulting in a crushing injury to his shoulder.,1
An employee received an injury to the right middle finger that required surgery and hospitalization. The employee's finger was caught between a pump plunger and the catwalk when the pump plunger fell to the catwalk.,1
An employee lost the tip of his right ring finger when it was caught in the trailer door.,0
"On February 05, 2016, at approximately 10:10 p.m., an employee removed a fixed safety guard to clear jammed material from the cutting machine. The cutting blade activated and amputated a finger and a thumb tip.",1
The employee was delivering food to a customer in the parking lot. The employee slipped on ice and fell breaking a hip.,1
An employee was cutting metal with a saw and a piece of metal lodged in the employee's eye.,1
"A route driver was unloading a truck, lost his footing, and fell out of the rear of the truck resulting in an elbow fracture/dislocation. The employee was hospitalized.",1
An employee was walking outside the warehouse when the employee slipped on a thin layer of black ice and fell to the ground breaking an ankle.,1
An employee was exiting a tractor when his prosthetic leg caught the side of the door and the employee fell to the ground. The employee suffered a bone chip to the upper right portion of his leg.,1
"An employee crushed his right pinky finger when it was smashed between the door and the door jam, resulting in an amputation from the nail bed up. ",0
"Three employees were moving the frame of a trailer to be placed on the bed of the trailer. The employees were guiding the frame, which was suspended from a crane. The injured employee had his finger caught between the frame and the bed of the trailer when the trailer frame was lowered into position, causing an amputation.",0
An employee was operating a powered industrial vehicle and collided with another employee operating a powered industrial vehicle resulting in two fractures to the tibia and multiple soft tissue injuries to the foot.,1
An employee was attempting to dismount a tall storage rack and fell breaking the right leg.,1
A pipe crushed an employee's finger between a pipe and the bucket of a frontend loader resulting in amputation of the left pinky finger at the hospital.,0
An employee suffered the amputation of the left hand middle finger to the first knuckle while testing the U1 cell heat sealer.,1
"An employee was walking to their vehicle in the parking lot at the end of a shift, slipped on ice, and fell resulting in a broken hip.",1
An employee was putting a ramp back into a trailer and the ramp slipped and smashed his finger.,0
A worker fell off a manlift and was hospitalized for broken ribs and a punctured lung. The employee was not wearing fall protection at the time.,1
"On 2/5/16 at approximately 9:00 a.m., an employee was loading four-inch black pipe onto a truck rack. The employee was securing the pipe into straps and a pipe rolled back onto his hands. The employee was wearing leather work gloves. The pipe crushed his right middle finger on his right hand resulting in a hairline fracture and laceration requiring sutures. The employee was later hospitalized for treatment of an infection.",1
An employee fell in an aisle way and suffered a broken left hip.,1
"On February 6, 2016, at approximately 12:30 PM, an employee sustained an amputation of the left middle finger to the first joint. The employee was preparing to dump a dumpster elevated by a forklift when the dumpster rolled back onto the employee's hand.",0
"An employee was helping the driver of a winch truck back up and hook up to a tank.  When the driver was close enough to the tank to hook up, the employee told him to stop and set the brakes.  The driver did stop and set the brakes, but the truck was still in gear and jerked backwards when his foot came off of the clutch. The employee had moved between the truck and the tank to connect the winch line and was struck causing a fracture of the right femur.",1
An employee responded to a road service call where he was going to replace two tires on an 18 wheeler. The employee was inflating the tire and when the bead set on the tire. The rim flew off and struck the employee resulting in a broken leg.,1
"While rolling the belt onto or off a pulley, the employee's glove was caught in between the pulley cutting the right pinky.",0
An employee was working on a skinner machine and amputated the whole middle finger on the left hand.,0
An employee was hammering a lifting rod and hit a finger while swinging the hammer causing a laceration and fracture of the left index finger.,1
"An employee was attempting to put a cat into a temporary holding cage, so that she could clean the cat's main holding cage. As she reached her left hand in to handle the cat, it bit her. The employee received 27 puncture wounds as a result. The employee was hospitalized for further treatment.",1
An employee was walking from the plant to his car and slipped on ice falling to the ground and breaking his shoulder.,1
"On or about February 6, 2016, an employee amputated the right ring fingertip while operating a grinder. The employee was hospitalized.",0
"An employee was removing a pump from a piece of equipment.  The air supply to the pump was knocked loose, closing a valve and amputating the employee's left middle fingertip.",0
"An employee working in the melt department was injured while moving materials by hoist. The employee pinched his 4th and 5th distal ends between the wire rope and the sheave of the load block, resulting in an amputation of the 5th distal digit.",0
"An employee slipped on ice and grabbed the door to prevent a fall injuring the employee's hip. The employee did not fall to the ground, but was admitted to the hospital.",1
An employee was operating surveying equipment. A dirt clod rolled down a hill and struck the employee in the back knocking him to the ground. The employee was hospitalized with a back laceration.,1
"On 2/6/16, an employee was hospitalized with a fractured right elbow after losing control of an ATV and rolling it over.",1
An employee was retracting the legs of the drilling platform when the jack pinned his right thumb.  The employee was taken to the hospital where the doctor was able to reattached his thumb.,1
"Whiles walking across a wet floor behind the horizontal mixers, an employee slipped and fell hitting his head and right hip on the floor.",1
An employee sustained a hernia while lifting a vanity for installation.,1
A glass shelf was leaning against the employee's leg. The employee lost balance and fell to the floor and some of the glass shelves fell on top of her. The employee was hospitalized with a fractured pelvis and a bruised right leg.,1
"After caring for a patient, an employee tripped on a chair and broke her hip.",1
An employee suffered a head injury as a result of a fall from a 10-12 foot ladder.,1
"An employee was operating a forklift. While turning into an aisle, the employee lost control of the forklift and put his left hand out catching his left thumb between the forklift and the racking.",0
An employee was walking out of the guard shack and slipped on some rock salt on the ground. The employee was hospitalized with a torn femoral tendon in the right leg.,1
An employee was repairing a leaking site glass containing caustic acid when the glass ruptured. The employee suffered thermal burns from the wrist to the shoulder.,1
"An employee was loading his trailer when he heard a hissing sound. He climbed the ladder to check the dome of the trailer, tightened the bolts and began to climb down the ladder. As he attempted to put his foot down on the second rung, he lost his footing and fell to the concrete below, fracturing his skull and suffering a concussion.",1
"On February 7, 2016, an employee cleaning the beef patty machine unit amputated the tip of the left ring finger.",0
"While lifting a case of drinks, an employee felt pain in the lower back. The employee was hospitalized with a lower back strain.",1
An employee slipped on ice on the ramp outside of the jetway breaking an ankle that required surgical repair.,1
"An employee was operating a stand-up forklift. As the employee was exiting the freezer section of the warehouse, she noticed that her forklift began to slide. As she attempted to stop the sliding with her left leg, her foot came in contact with a concrete bollard, which was located outside of the freezer section and on the side of the forklift. She lacerated her foot and possibly fractured her ankle.",1
"While an employee was driving a baggage tug across a wet ramp, she collided with a second tug being driven by a coworker. She was ejected from the vehicle, breaking her pelvic bone.  A seat belt was not worn at the time of the incident.",1
An employee was descending a ladder from a roof when the ladder collapsed. The employee fell to the ground and broke his left arm.,1
"An employee was operating a drill press while using gloves. The gloves were caught in the drill, lacerating part of the employee's thumb.",1
"On or about February 8, 2016, at 7:00 a.m., an employee was stepping out of her car when she slipped and fell on ice on the top level of the parking garage. She fractured her left ankle, requiring surgery.",1
An employee's right-hand index fingertip was amputated by a mixer-grinder machine head. The grinder was still spinning at the time of the incident.,0
"An employee slipped and fell 3 to 4 feet off the back of a straight truck while filling up the water tank, suffering broken ribs and a collapsed lung.",1
"An employee was operating a cut-off saw when his glove was stuck in a chain, pulling his hand into the saw blades. He amputated his pinky finger and part of his right-hand ring finger.",0
"An employee was working on a drilling operation. An excavator was lowering a pipe casing onto a stack of casings when the casing shifted, contacting and bruising the employee's right leg.",1
"An employee was unloading a tractor trailer using a reach powered industrial truck (PIT). The tractor trailer pulled away from the dock while the employee was exiting the trailer on the PIT, causing the PIT to fall between the trailer and the loading dock. The employee suffered a broken left clavicle and facial fractures.",1
"An employee attempted to stop a moving belt and sheave when his fingers were caught in the rotating parts, amputating the second, third, and fourth digit fingertips on his left hand.",1
An employee was spotting for a driver backing up a truck when the employee's arm was pinched between the truck and a dumpster at the site. He suffered a broken arm.,1
"While counting product on a storage shelf, an employee lost their balance and fell. The employee's foot was caught under a wood pallet, and the employee's right ankle fractured, requiring surgery.",1
"An employee was operating a stand-up forklift when the forklift struck a shelf support, chipping the employee's vertebrae and other bones.",1
An employee was picking up plywood that was covering a floor opening when the employee fell 10 to 15 feet through the opening.,1
"An employee slipped on snow in the driveway of a client's home, fracturing his right ankle. He was hospitalized for surgery.",1
"On or about February 8, 2016, an employee suffered a pelvic injury after being caught in/crushed between form work and a precast panel.",1
"An employee's left thumb was slammed in the door of a work vehicle, causing an open fracture to the thumb and an amputation of the distal tip. The employee required reattachment surgery.",1
"On or about February 8, 2016, an employee was hand-feeding a gluer machine when the employee's right hand was caught in the machine. The employee was hospitalized with a right hand injury.",1
"While attempting to remove trash wood that fell behind a machine, an employee's glove was caught in the machine's rotating bit, puncturing the right hand and wrist.",1
An employee received a laceration on his left hand and a skin avulsion on his right arm after being pulled into a conveyor in the coating department while performing maintenance.,1
"An employee was running production on a spot welder when the employee's hand was caught in the machine's point of operation, amputating the thumb.",0
An employee was servicing a forklift at a customer's site when the employee's hand was struck by the forklift motor cooling fan blade. The employee suffered hand and wrist lacerations and a broken middle finger. The forklift was not locked out at the time of the incident.,1
An employee slipped and fell while delivering mail.,1
"On February 8, 2016, at approximately 1:00 PM, an employee working on an HVAC unit fell approximately 8 feet into the return case of an air handler unit on the roof of the structure. The employee suffered vertebrae, rib, and scapula fractures, as well as a collapsed lung.",1
"While operating a bagging machine, an employee's hand was crushed, amputating his left index finger.",1
"On Monday, February 8, 2016, at approximately 12:15 PM, an employee was operating a double rider (powered industrial truck). She pressed the wrong button and moved the truck forward instead of backwards, and she was pinned between the truck and a rack upright. She fractured her pelvis and was hospitalized.",1
An employee had just poured concrete on the bridge deck and was using a paving machine to move the concrete when the employee slipped back and fell approximately 10 to 11 feet to the lower roadway from the upper bridge level. The employee hit a metal corrugated pipe and fractured the left knee.,1
"On or about February 8, 2016, a marble slab fell on an employee while the employee was unstrapping it. The employee suffered a severe pelvic injury and broken thigh.",1
"While an employee was attempting to slice a meat product using a knife, the blade lacerated the employee's abdomen just above the belly guard.",1
"While removing furniture, an employee was struck by the furniture and fell backward into a metal rack, causing a neck fracture, cerebral concussion, and scalp laceration.",1
"A trash can fell and hit an employee's leg, breaking it.",1
"On or about February 8, 2016, an employee was delivering a water heater to a homeowner when he slipped on snow-covered ice and broke his leg, requiring surgery.",1
"An employee was mopping a floor on February 8, 2016, when she slipped and fell injuring her right side and ribs.",1
An employee was injured and required hospitalization after she fell in the dining area of the facility.  Mats had been stacked in an area and the employee tripped over the mats while carrying a tray of food.,1
"While troubleshooting a dock board, a maintenance employee became pinned under the unit.",1
"Workers were performing tree trimming activities at a residential jobsite. While moving traffic cones that were stored on a wood chipper, an employee's right hand contacted the chipper's fan assembly, amputating his fingertips.",0
"On February 9, 2016, an employee's left thumb was amputated to the first joint while the employee was operating a brake press to bend steel.",0
"On February 9, 2016, at approximately 10:30 PM, an employee was pressure-washing the inside of a scrubber unit and felt a pain in his back. He was hospitalized overnight with a strained back.",1
"An employee was unloading a new chiller from a truck using the lift gate. While trying to get a dolly off of the truck, the chiller fell on and pinned the employee, fracturing his pelvis.",1
"An employee had just worked on an aircraft while standing on a movable platform. As he was going down the platform's fixed ladder, he slipped between the second- and third-from-the-top rungs (a total of three rungs) and fell 2 feet to the ground. He was hospitalized with a head injury.",1
"While trying to stop three patients from escaping an area of the facility, an employee was kicked in the leg by one of the patients. The employee suffered a broken tibia.",1
"An employee was snowmobiling while participating in a winter training exercise. The employee was dislodged from the snowmobile and struck a rocky surface, fracturing the left ankle and dislocating a shoulder.",1
"On February 9, 2016, an employee was attempting to trip the proximity sensor on the finishing line when the clamp activated, amputating the employee's left thumb distal to the first joint.",0
"While transporting bags to a terminal, an employee walked between the bag carts and a motorized tug. While turning left, the employee suffered a broken left leg, requiring hospitalization.",1
"While delivering mail at a private residence, an employee slipped on black ice and fell on the stairs.  The employee injured the left ankle and was hospitalized overnight, requiring surgery.",1
"While moving a wooden pallet, an employee received a wooden splinter to the left palm.",1
"An employee was working on top of a steel girder when he stepped down to a concrete bend that was approximately 30 inches beneath the girder and diagram. While climbing down, the employee's retractable locked up, causing the employee to lose his balance, slip, and fall against the girder and diagram, fracturing his left leg.",1
"While attempting to unjam a reefed system, an employee's right hand was caught between the rotary valve and a rotating part in the system's discharge shoot. His hand was amputated.",1
An employee was hit by a vehicle in the parking lot as she was on her way to work. She suffered broken bones in her ankle and was hospitalized.,1
"An employee was working on a truck trailer when the truck shifted, causing the employee to fall to the ground and fracture his shoulder. He was hospitalized overnight for surgery.",1
An employee getting out of a truck fell to the ground and fractured his right hip.,1
"On Tuesday, 02/09/16, an employee was operating a skid steer to push a hot slab when he got stuck. When a coworker tried to push him out, the employee's right arm was burned by the hot slab, eventually requiring hospitalization.",1
"An employee was using a miter saw to cut aluminum while building a sign. The saw blade grabbed the aluminum material, and the material lacerated the employee's hand. The employee was hospitalized and required surgery.",1
An employee was hospitalized for knee pain after performing shoring activities.,1
"An employee was climbing a 6-foot ladder while carrying a piece of lumber when he fell, injuring his ribs and lung.",1
"On February 9, 2016, an employee was performing maintenance on a front-wheel drive prismatic machine. While the employee was working on the coolant tank, the high-level arm was activated, causing the tank pump to start. The employee's right pinky finger was amputated by the pump impeller.",0
"An employee was on a scissor lift when it tipped over onto him and pinned him, breaking bones in his back.",1
An employee was working with a client as part of the day program when the client experienced a behavioral outburst and pushed the employee to the floor. The employee suffered a broken hip and had to be hospitalized.,1
An employee was working on the reactor when a chemical reaction in a tank caused a metal pump housing to burst. The employee's right leg was fractured below the knee.,1
"On or about February 9, 2016, an employee received an amputation while operating a lathe.",0
"While riding on a waste collection truck, an employee fell backward and struck his head on the ground. He later fell again, this time on his face, injuring his right arm and sustaining a possible concussion. He was hospitalized.",1
"While an employee was laying pipe, a piece of 36"" concrete pipe became disconnected from an excavator. The pipe rolled down the slope of the excavation and up against the employee, striking and breaking his lower left leg bones.",1
"An employee was preparing to clean a machine and asked a coworker for assistance. The two were then involved in a physical altercation, and the employee sustained neck and throat injuries.",1
"An employee was pulling a piece of material from a table top when the employee slipped and fell to the floor, fracturing the hip.",1
An employee was grading veneer wood when his hand was caught in a drive chain sprocket. His right index and long fingers were amputated.,1
"While attempting a motorcycle jump during rehearsal, an employee hit the front of the landing ramp on stage at the waist and fell down to the stage via air bag. He suffered a laceration at the waist and a fractured pelvic bone, requiring surgery.",1
"An employee was acting as a spotter for a trencher who was removing frozen soil to expose an empty conduit near a chain link fence. The stinger hit something hard underground and bounced up in the air, catching the chain link fence. This caused the teeth of the stinger to ride up the chain link fence, catching the employee's hand, which was resting on the fence. He suffered a large laceration to the palm of his right hand below the middle and ring finger, as well as a broken finger.",1
An employee was operating a boring mill machine while his right hand rested on top of a metal beam on the shuttle. The beam moved during the operation of the machine and pinched his right middle fingertip between it and another metal beam. His fingertip was amputated.,0
"An employee stepped on a spray nozzle and fell onto a concrete floor, fracturing and dislocating her ankle and requiring hospitalization.",1
"An employee was performing repair activities on a dock leveler when support blocks failed, allowing the dock plate to come down on top of the employee. The employee was hospitalized with a fractured vertebrae and ruptured discs.",1
"An employee was loading trailers on a semi-trailer for shipment. While climbing off the trailer, the employee's wedding ring got caught, de-gloving the finger.",0
"An employee was cleaning a conveyor when her left-hand glove was caught in a roller. Her left middle finger was partially amputated, and her left index finger was fractured.",0
"An employee was cleaning a paper machine when the employee's hand contacted the machine, resulting in a left-hand palm laceration that required hospitalization and stitches.",1
"While pop riveting awning trim from a single buck scaffold platform, an employee fell approximately 6 feet from the platform onto the concrete below, suffering a head injury. The platform was unguarded at the time.",1
"An employee was operating a rotary card sealer when a package became mis-positioned. While he attempted to reposition the package, the machine cycled and caught his left hand, burning and crushing three fingers.",1
"On or about February 10, 2016, an employee was hospitalized with a left rib/lung area injury after falling from the tailgate of a delivery truck to the ground.",1
"An employee slipped and fell on the cement while taking trash to the compactor, sustaining a fractured right wrist that required surgery.",1
An employee amputated her left pinky finger after contacting a moving part (chain and gear) on a machine.,0
"After installing a light fixture, an employee fell off the ladder, suffering a compression fracture to the lower back and dislocating an elbow.",1
"An employee was using a jib crane to flip a cantilever. He guided the hook with his right hand and used the crane controller with his left hand. The employee hit the ""up"" button on the controller and his finger was caught between the hook and the cantilever, amputating his right index fingertip.",0
An employee's right middle fingertip was amputated while the employee attempted to unjam a blanker die and block machine.,0
"An employee was taking straps off a loaded flatbed. A load of metal cattle panels shifted when the tie-down straps were removed, causing metal panels to fall on the employee. The employee suffered scratches and bruises.",1
An employee was unloading the last window from a container when the previously unloaded windows that were stacked against the container fell against his lower leg. He was hospitalized with a broken tibia and required surgery.,1
"On or about 2/10/2016, an employee was at the back of his mail delivery truck gathering the mail to be delivered when he was shot twice. He suffered gunshot wounds to the right side of his face and body.",1
"On 2/10/16, an employee's hand was caught in the exit roller of an assembly table. The employee was hospitalized and his left index finger was surgically amputated.",1
"An employee was trying to hook a set of trailers together when he slipped and fell, breaking his right leg.",1
An employee was cutting plywood on a table saw when the sawblade amputated his left thumb at the knuckle.,1
"An employee was in the bucket of an aerial lift while it was being repaired. A stabilizing cable broke, the bucket tipped, and the employee fell to the ground. The bucket had been lowered down onto the truck during the repairs. The employee sustained a punctured lung, cracked ribs, and a broken collarbone.",1
An employee was using a grinder on a vehicle when the sparks created by the grinder ignited brake cleaner on the vehicle. The resulting flames burned the employee's face.,1
"An employee was doing maintenance work on a conveyor, checking to see if material or debris had fallen down under the conveyor. The conveyor was stopped and the employee went to grab something he saw underneath it.  When the person who controlled the movement of the conveyor saw the employee reach under the conveyor, he put the handheld control down to walk towards the employee. When he went to place it down, he accidentally dropped the control and it energized the conveyor. The employee was caught between the conveyor and a cross bar under the conveyor, crushing his abdomen. He was hospitalized for surgery.",1
"An employee was working on a residential cable connection outside while standing on an extension ladder. While the employee was descending, the base of the ladder slipped on ice, causing the ladder and employee to fall. The employee suffered lumbar and hip injuries.",1
"An employee was reaching down to pick up a box to clear a jam when his jacket was caught in a roller. As he tried to pull it out, his hand got pulled in as well. His hand and lower arm were crushed. The roller is part of a recirculation belt-driven conveyor.",1
"An employee was walking from one deck to the deck feeder. As he crossed the gap between the two, his foot became caught in the chainway, breaking his right ankle.",1
"An employee was working with a chop saw when his hand was exposed to the blade, partially amputating his right index finger.",0
An employee slipped and fell on ice while walking from a vehicle in the parking lot to the building entrance. The employee tore ligaments in the left knee and sprained both ankles.,1
"An employee was cutting a narrow strip of flexi glass using a table saw. He was pushing the flexi glass with a 'push stick' using his right hand and was holding the material with his left hand. As the material was going through the blade, his left index finger was caught by the table saw blade, amputating his fingertip.",0
"An employee was hooking a winch cable from a truck to a crane while standing between them. The truck was positioned up hill from the crane. As the employee was connecting the winch line, the truck slid down the icy hill and pinned the employee against the crane. The employee suffered soft tissue damage in the left shoulder.",1
"An employee was holding a chain attached to a gopher machine being lifted by a forklift. The employee's hand was caught in the chain as it was being lifted, fracturing the right ring fingertip.",1
An employee's left finger fractured after getting caught in a door that was being closed.,1
An employee was changing the jaws on a CNC lathe when the jaw hydraulic clamps were actuated by the foot control. His right index fingertip was amputated above the first joint between the jaws and the new part.,0
"An employee's hand was caught in the chain at the end of a stinger trailer, amputating two fingertips.",0
"While walking by truck pallets, an employee tripped over plastic wrap and fell to the floor. The employee suffered a broken hip from impact with the floor.",1
"An employee mistakenly grabbed a bottle of methanol, believing it to be a water bottle, and took a drink. The employee suffered from methanol poisoning.",1
An employee was unloading coils from a truck using an overhead crane and was injured when his finger was crushed between the rigging coil tongs and the coils that were being picked up by the rigging.,1
An employee was walking a small dog and slipped on the ice. The employee suffered a broken ankle and was hospitalized.,1
An employee slipped on ice and suffered a broken leg.,1
"A forklift backed into and struck an employee who was walking on a ramp, crushing both of the employee's legs.",1
"An employee was unhooking chain slings on a crane moving via remote control. Hooks from the overhead crane, which was being operated remotely by a coworker, caught a 6-foot-tall bundle of steel stacked behind the employee and pulled it over onto the employee's leg. The employee's leg broke.",1
"An employee was attempting to move a trailer with a yard jockey style truck. The employee backed the yard jockey up to the trailer and missed the kingpin. He then attempted to exit the yard jockey and attach the trailer lines. After exiting the yard jockey, he walked to the rear of the truck and placed his body between the yard jockey and the trailer. At the time, the yard jockey was left in reverse and the parking brake was not engaged. The yard jockey moved, and the employee was then caught between the yard jockey and the trailer. He was hospitalized with upper and lower body injuries, including strains, sprains, and severe bruising to the leg and torso.",1
An employee was using an end milling machine while wearing gloves. The machine caught the employee's glove and amputated the left-hand index finger.,0
"An employee was walking into work from the parking lot when she slipped and fell on icy pavement and fractured her left ankle, requiring hospitalization.",1
"A worker was backing a log out of the mill when the log became jammed. When a maintenance employee attempted to push the log out with a block of wood, a chain amputated the maintenance employee's right index finger.",0
"An employee had just completed performing preventative maintenance on a blower unit. When the employee restarted the equipment to determine if it was functioning, his right middle finger was caught in the belt and pulley, amputating the finger at the first joint. The belt guard was not in place at the time of the incident.",0
"A maintenance crew was fabricating and terminating an ""EYE"" splice on a tether. The injured employee was pulling a serving line trough a termination when the serving line wrapped around his right-hand middle fingertip. When he attempted to free his finger from the serving line, his right middle fingertip was severed at the first knuckle.",1
"An employee was trying to remove cylinders that open/shut the grappler on a boom loader. The employee removed bolts and pins holding the cylinder in place, but the cylinder was stuck.  As the employee tried to manually remove it, the swivel moved and caused the employee's fingers to get caught between the swivel and a valve. The employee's left-hand middle and ring fingers were crushed. The middle finger was surgically amputated and the ring finger also required surgery.",1
"An employee was cutting castings off of trees with a saw when the sawblade caught or broke and pulled his hand into the blade.  His right-hand ring finger was amputated, and the back of his hand was lacerated.",0
"While stepping down to a work space to take pipe measurements, an employee's right knee gave out, causing him to fall onto piping below. He suffered a spiral fracture of his upper right tibia.",1
"An employee was backing out of a parking spot when the employee's vehicle was struck by another vehicle. The employee suffered head, neck, and back injuries.",1
"An employee was coming down a ladder. The wind pushed him to the ground, where he tripped on a wire, breaking his left leg.",1
"An employee was running a conduit when a byproduct of the plant fell off a conveyor belt into a hot water tank. The water splattered onto the employee, causing skin burns.",1
"An employee went on the roof to clean plastic debris. He noticed a piece of plastic by the leading edge of the roof. When he attempted to remove it, he slipped and fell about 13 feet from the leading edge of the roof to hard-packed dirt below, breaking both legs. Fall protection was not worn at the time of the incident.",1
"An employee was mig welding on a vertical seam on a 137-ft-diameter, 40 ft.-high open-top above-ground steel storage tank when a piece of hot slag dropped down onto his right boot. His leg began swelling and he was later hospitalized with right ankle burns.",1
"On February 11, 2016, an employee was performing a flare test on a 5"" metal tube. The employee was holding the tube on the test cone and cycled the hydraulic press. The tube slipped off of the test cone, pinching the employee's finger between the tube and the bottom of the press. The employee's left pointer fingertip was amputated.",0
An employee's right thumb was amputated when it got caught between the door of the linen room.,0
"An employee was cleaning a fryer and placed a pot of oil on the ground behind him. The employee took a step back and stepped into the pot of oil, burning his foot and ankle.",1
An employee was opening a door. The door handle broke and the employee fell to the ground fracturing the right arm.,1
"On February 12, 2016, at approximately 8:30 a.m., an employee and coworker were making a delivery with a freightliner step van. The employee got out of the van and walked to the back of the vehicle to open the van doors.  The driver began backing towards the dock and the employee was pinned between the van and the dock, resulting in fractured ribs and a bruised torso.",1
"An employee was stepping off of the tailgate of a truck when he slipped and fell, breaking his lower tibia.",1
"An employee responded to a call about issues in the silo. The blower motor amputated the employee's right index and middle fingers, and fractured the employee's ring finger. The employee underwent surgery.",0
"While removing plastic from an injection blow molding machine, an employee's right index fingertip was amputated.",0
An employee was using a handheld angle grinder on a light pole base when the grinder rebounded and contacted his unprotected face. The employee suffered a severe laceration to the left side of the face. The grinder was unguarded at the time of the incident.,1
"An employee was working at the loading dock, lowering an automatic dock leveler to unload a trailer. The lift gate on the trailer was raised 4 to 6 inches above floor level when the dock leveler caught against the lift gate. When the employee reached down at the floor level to operate the switch that controls the lift gate, the leveler struck the employee's left hand, breaking two fingers and causing severe lacerations.",1
"While bending parts on a brake press, and employee's right index fingertip was amputated between the part and the press.",0
"An employee was operating an auger to drill holes for electrical poles when an auger fell on the employee's right foot, amputating a toe.",1
"While operating an electric powered pallet jack, an employee suffered crushing injuries when pinned between the handle of the pallet jack and a wall inside the building.",1
"On February 12, 2016, an employee cutting wood was brushing sawdust away from the chop saw's cutting surface when the chop saw blade caught the employee's glove and pulled the employee's hand toward it. The employee's right thumb was amputated.",1
"An employee was walking/working along the casting line as steel was being cast. He was wearing a PAPR unit around his waist line when his PAPR cartridge overheated and started to burn, filling his PAPR mask with smoke. The employee suffered from flu-like symptoms caused by smoke inhalation.",1
"An employee had replaced an antenna on a cell phone tower. As he was making his way down the inside section of the tower, he tried to make his way around an obstacle. He went to the outside of the tower to finish the climb down. The employee lost his footing and fell approximately 40 to 50 feet to the ground, suffering a shattered ankle, knee damage, a swollen right arm, and lacerations/contusions to the face. He was equipped and wearing fall protection at the time.",1
An employee was working with a CNC lathe machine when the machine amputated his right index fingertip. The machine was running at the time of the incident.,0
"An employee was performing service at a resident's house. As the employee was leaving the apartment, he pushed the resident's cat inside as it was going out the door. The cat scratched his left hand. He was later hospitalized for an infection.",1
An employee was struck by a forklift.,1
An employee was using a hydraulic pop rivet gun to repair a railcar. The employee's finger was amputated when they pulled the trigger.,0
"An employee was operating a table saw to shave 1/2"" off a 72"" x 30"" 3/4"" plywood board when the middle finger on his right hand came into contact with the 10"" cutting blade. His finger was amputated at the fist knuckle and required surgery.",0
"On February 12, 2016, an employee was preparing food on the fry line when she slipped on a plastic wrapped plastic spoon and injured her hip. She underwent hip replacement surgery.",1
An employee was pulling on cable in the attic when his hernia became twisted and strangulated.,1
"While washing a patient with an aide, an employee, who was holding the patient on the left side, felt a sharp burning pain across the lower back. The employee's legs became numb, and the employee fell to the floor. The employee was hospitalized with a lower back musculoskeletal injury.",1
"On or about February 12, 2016, an employee was making a cut to a roof membrane. The HVAC unit hole was uncovered to fit the material around the hole, and the employee fell into the hole through the roof. The employee was hospitalized with right elbow and hip injuries.",1
"An employee operating a vertical milling machine was brushing metal chips away while wearing gloves. The tip of the glove and the employee's left index finger became caught in the machine's drill bit, amputating the finger.",0
"An employee was working next to a pile of steel beams when the beams rolled on top of him, breaking his right leg.",1
An employee was hospitalized due to an explosion at the tank battery.,1
An employee was pulling steel pipe off of a cantilever rack when a large bundle of angle iron fell off the lower rack and crushed his foot.,1
"An employee slipped and fell hitting his head, resulting in hospitalization.",1
An employee fell off an 8-foot ladder and fractured his hip on the concrete floor.,1
"An employee was testing the jumps and features of the terrain park, lost control of the snowboard, and fell sustaining severe head trauma.",1
"An employee was walking in the parking lot, slipped on ice, and fell fracturing the left ankle.",1
An employee was operating a snowmobile to conduct fishing license checks and fell off the snowmobile after catching a patch of ice.  The employee was hospitalized with seven broken ribs and a dislocated shoulder.,1
An employee was trying to clear a jam in the body shop when his foot slipped and the employee landed awkwardly. The employee suffered a fracture to his left ankle resulting in a hospitalization.,1
On 2/13/2016 at about 1:30 p.m. an employee who was cleaning around a floor grain auger with an open gate fell into a hole around the auger.  The employee's leg was caught in the moving auger and the leg was amputated around the knee.  The employee was hospitalized.,1
"A valve cap, under pressure, struck an employee in the upper left arm resulting in a fractured arm and flesh loss.",1
"While clearing a jam on a material grinder, an employee's fingers came into contact with the material grinder blades. The middle and ring fingers were amputated to the proximal joint. The machine was not locked out at the time of the incident.",0
An employee was heating and circulating a chemical batch in a process tank. The employee opened the automatic valve in the control room to begin the transfer of hot molten chemical material. Two bottom drain valves were left open on the transfer line spilling the hot molten chemical material onto the floor. The employee was hospitalized for second and third degree burns to the lower extremities and both hands and arms.,1
An employee was fixing a boomerang machine caster. A support fell and pinched the employee's right index finger between the floor and the machine resulting in an amputation injury.,0
An employee slipped on pieces of laminated paper and fell breaking an ankle.,1
"An employee was walking from the store to his truck, slipped on ice in the parking lot, and fell resulting in a broken right ankle.",1
"An employee was reaching overhead to remove a metal spacer when an aluminum log fell on the employee's leg, breaking it.",1
"On February 14, 2016, an employee was scrapping down the sides of a 56 gallon mixing tank with a wooden paint stick. His shirt got tangled with the rotating mixer shaft and the employee was pulled against the tank. The employee suffered a punctured lung, cracked ribs and lacerations to his right side, forearm and forehead.",1
"On or about February 14, 2016, an employee was scrubbing equipment by hand and was hospitalized for a chemical irritation to the back of the hands from the diluted acid cleaner.",1
An employee amputated three fingers while working on an auger.,0
"An employee was inspecting the location of a future concrete pour. A gust of wind lifted him and the material he was standing on into the air. When he landed on the ground, bones in the neck, arm, and back were broken.",1
"An employee was cleaning equipment, slipped in the mud, and fractured the right fibula.",1
A worker lacerated his right finger while using a table saw. He was hospitalized as a result of the injury.,1
"An employee fell about 20 feet from a ladder resulting in broken ribs, a broken wrist, bruises and a split liver.",1
An employee was using a sledge hammer to knock a piece of wood from in between pipes. The pipe struck the employee's right hand and lacerated it.,1
An employee was removing meat from a bone and punctured their wrist with the knife.,1
An employee amputated fingertips while operating a shearing machine.,0
"An employee hurt his back while placing a roll of plastic onto an uncoiler.  The roll of plastic weighs approximately 40 pounds.  While placing the roll onto the uncoiler, the roll slipped and fell.  The employee attempted to catch the falling roll of plastic resulting in a lower back injury.",1
An employee cut her middle finger on a cake-sponge cutting machine resulting in a partial amputation of the right middle finger.,1
An employee slipped on the icy covered sidewalk leading to her car and broke her hip.,1
A employee was cleaning the sensing eye on the baler when the baler cycled and caught the employee's right middle fingertip resulting a partial fingertip amputation.,0
An employee was operating a pepperoni slicer and amputated his finger and severely lacerated several other fingers while attempting to remove food from the machine.,0
An employee was working after the store closed. He was using a reach truck to remove a vanity from a pallet that was stored in an overhead rack. He stepped backwards off the operator platform and fell approximately three feet to the ground level fracturing his collarbone. The safety belt and lanyard were not worn at the time.,1
An employee fell off a ladder.,1
An employee was lifting a 50 lb. pipe fitting elbow with another employee and suffered an abdominal hernia rupture on his right side.,1
An employee was trimming a palm with a polecat bucket lift. The polecat flipped over with the employee inside and the employee fell about 15 feet.,1
An employee was clearing debris from a sloped roof. The employee slipped on a piece of plywood and fell 18 feet to the ground resulting in a broken back.,1
"On February 15, 2016, an employee was pushing a cart and tripped over pallet wrapping resulting in a fall to the floor and a fractured pelvis.",1
An employee was struck by a forklift when he was trying to warn the driver that a box was about to fall off the forklift. The forklift ran over the employee's right ankle resulting in the amputation of the foot.,0
An employee stepped off the bottom step of a fixed ladder at the crossover to a four-foot high conveyor and onto a piece of wood scrap. The employee suffered a twisted right ankle.,1
"On February 5, 2016, at approximately 11:30am, an employee was delimbing a felled tree on sloped ground using a chainsaw. As the last limb was being cut, the tree began sliding on the snow and the employee's right leg was pinned by the limb resulting in fractures to the tibia and fibula and hospitalization.",1
"On or about February 15, 2016, an employee suffered the amputation of their right index fingertip when it was caught between a conveyor that was being moved on a forklift and a press.",0
"While operating the mill line in the main shop, the employee's right ring finger was caught in the hydraulic press when he tried to free a stuck part. The employee's finger was fractured and lacerated.",1
An employee was operating a table saw cutting lumber. A piece of the wood that he was cutting kicked back causing the employee to lose his balance.  His right middle finger struck the saw blade resulting in the loss of bone to the right middle finger.,0
"An employee entered the cat walk approximately 13' above the grade. As he was walking to borrow a tool from another employee, he fell through an opening that was not secured from pedestrian foot traffic. The employee suffered a compound fracture of the right leg.",1
An employee was climbing on the back of an 18-wheeler tractor trailer stacking tires and fell breaking the left wrist and hip.,1
An employee was drying  the star valve with a paper towel when the machine turned on.  The valve rotated and sucked the towel and the employee's finger into the rotating equipment resulting in the amputation of the middle finger to the first knuckle.,0
"An employee was cutting an angle on a small (5"") piece of aluminum using a chop-saw. The material kicked upward and the employee's left thumb contacted the saw blade resulting in amputation of the thumb.",1
A third party truck driver was loading natural gas condensate into his tank truck when an explosion occurred and injured the driver. He was hospitalized for burns to both hands and his back.,1
An employee was tying off a vessel in dry-dock. The employee fell 20-25 feet through a make shift cover onto the safety deck below resulting in broken ribs and vertebrae.,1
Two ladders were leaning against the wall.  An employee was going up one of the ladders when the wind blew the other ladder into him knocking him down approximately 3 feet.  The employee was hospitalized.,1
The employee was installing a fence when he slipped and fell. He grabbed the fence and cut his right middle finger on the fence.,1
"An employee was walking from their car to the plant, slipped on the ice, and fell resulting in a broken knee cap.",1
"An employee got off a ladder to move the ladder and while pulling the ladder towards himself, the ladder struck his right shin resulting in a contusion.",1
An employee was lining up a piece of steel under a punch press. The employee pulled the lever to activate the press and smashed the tip of the left index finger resulting in a partial amputation.,1
An employee was walking up a conveyor belt and fell resulting in a head injury.,1
An employee was engaged in sanitation of the meat blender in the blend room and amputated the right thumb.,0
An employee was cutting wood using a table saw and amputated the tip of his left thumb.,0
"An employee was stepping down from the crane operator's cab and fell to the ground, fracturing the right hip.",1
An employee stepped on a tack while walking in the work area. The employee was later hospitalized for an infection in his foot.,1
"An employee slipped and fell on the floor, suffering a fractured clavicle.",1
The employee was operating a chemical transfer bleeding process. The chemical transfer line ruptured during the transfer and the employee was exposed to sulfuric acid. As a result the employee suffered burns on various part of his body.,1
An employee was jacking up a floating roof in an above ground storage tank. The extension on the bottle jack slipped and struck the employee resulting in stitches to the ear and a concussion. The employee was hospitalized.,1
An employee amputated 3/4 of the right index finger while operating a plastic film winder.,0
"Employee was relighting an industrial furnace that went out.  Gas had built-up in the furnace and when the employee attempted the relight, an explosion/flash fire knocking the employee backwards and causing burns to the face.",1
"An employee was kicked in the back by a mare, resulting in four broken ribs and a lacerated liver, spleen and kidney.",1
"An employee slipped on an icy surface, fell to the ground, and struck his head.",1
"An employee was unloading windows at a delivery site and tripped over a strap  in the trailer, falling and breaking an ankle.",1
An employee tripped over a rolled up rug and fell suffering a dislocated shoulder and a broken humerus.,1
"An employee was struck several times by a patient with a knife. The employee suffered puncture/laceration wounds to the neck, face and abdomen.",1
An employee slipped on ice and fell while walking to their work truck in the company lot. They sustained injuries to their left knee that required surgery.,1
An employee walking down the hall tripped and fell resulting in shoulder and knee injuries.,1
An employee fell while installing roof sheathing. The employee suffered a concussion and broken ribs.,1
An employee climbed up a 35' X 5' X 5' rebar column to attach the forms.  He cut loose two supports.  The column began to slowly roll and fell catching the employee's foot. The employee was admitted to the hospital for a contusion on the right foot.,1
An employee suffered the amputation of the right middle fingertip when it was caught in the door as two employees attempted to close misaligned flammable locker doors.,1
An employee was rolling sheet metal into a HYD double pinch plate roller machine when his hand got caught between the rollers resulting in the amputation of his left index finger.,0
An employee suffered a finger amputation after his finger was injured from a drill bit attached to a roto hammer.  The drill had accidently been actuated as employees were attempting to move it.,0
"An employee was moving a display rack. When he stepped back, he tripped and fell fracturing his left hand.",1
An employee was calibrating a temperature instrument and was sprayed with hot water resulting in burns.,1
An employee was putting rebar in a down cell in a block wall. The employee was electric shocked when the rebar he was working with arced with a power line.,1
"The employee was unloading appliances from a truck. As he was walking backwards, he slipped and the oven that he was carrying fell on his left leg fracturing it.",1
An employee reached under a conveyor belt and injured the pinky finger.,1
"On Tuesday, February 16, 2016, at approximately 4:00PM, an employee was walking across a wet 6""x6"" piece of lumber, while carrying a 4""x4"" piece of lumber, when he slipped and fell. The employee sustained a fracture to his left ankle and was hospitalized.",1
An employee was engaged in rigging down activities. The top drive cradle fell from the rig and struck an employee on the leg resulting in amputation of the leg.,0
"On February 16, 2016, an employee suffered a fractured left forearm when their arm was pulled into a hose puller at the reeler end of line 8 in the extrusion department.",1
An employee was driving a forklift and struck a rack.  She pinned her hand between the rack and the forklift resulting in the amputation of two fingers on her right hand.,0
An employee was operating an Ace strap cutting machine and the blade of the machine severed her left hand pointer finger at the knuckle.,0
"An employee was adjusting the valve of a condensate line and attempting to ""sewer"" the hot water through a hose. The hose failed and hot water (200 degrees) caused second and third degree burns to the employee's arms, abdomen and legs (35% of the body).",1
An employee was getting out of a vehicle and slipped on ice injuring his left hip.,1
"An employee was operating a stand up counterbalance in the case pick area when she collided with pallets in the racking. The corner of the upper Chep pallet penetrated the operator compartment, striking the employee in the upper hip area and fracturing the pelvis.",1
"An employee was operating a trimmer.  As the employee cleared a jam on the in-feed conveyor, his right middle finger was caught in the chain and sprocket resulting in a fingertip amputation.",0
An employee was removing a mold from the injection molding machine and pinched a finger resulting in amputation.,1
"While ripping a piece of 2x4 on a table saw, an employee amputated the tip of the right thumb.",0
An employee was filling out paperwork while standing next to a standup pallet truck. Another standup pallet truck struck the employee resulting in a right ankle injury.,1
An employee was working on a roof.  The employee was in the process of moving roof trusses when he fell 9 feet to a lower level and broke his left leg.,1
"As an employee walked to his truck in the parking lot of building 5, the employee slipped on snow and ice.  The employee suffered a fractured left ankle requiring surgery.",1
"On Tuesday, February 16, 2017, at approximately 12:30PM, an employee was in the process of washing out the salt spreader on the rear of a truck. The employee sustained fractures to his right arm and was hospitalized when his hand was caught in the moving spreader mechanism.",1
An employee was trying to prevent multiple rollers from coming out of the conveyor. Another employee went to point at the area of concern when a roller came out and pinched a finger resulting in the amputation of the right hand index fingertip.,0
An employee was lowering a scissor lift with the remote control. His left thumb got pinched in the lift resulting in a fingertip amputation.,0
An employee was working on a live electrical panel. An explosion occurred. The employee was hospitalized for burns.,1
An employee fell off a podium platform and was admitted to the hospital for a broken arm.,1
An employee was pushing a 4-wheel cart to the exit door. Her foot got caught under the wheel resulting in a cut on the lower right leg.,1
"An employee was cleaning a bathroom shower, slipped on water on the floor, and fell resulting in injury to the left wrist.",1
An employee was working on a ladder and felt it wobble. He jumped off the ladder resulting in a broken leg.,1
"An employee was cutting material on a radial arm saw. As the employee attempted to grab material with the right hand, the saw was activated with the pneumatic foot pedal. The saw contacted the employee's wrist and amputated the right hand.",1
"An employee was pouring floor stripper in a bucket to dilute with water. While pouring, the chemical splashed into his left eye.",1
"While checking to see if a room was ready to be rented, an employee tripped on the leg of a chair, fell to the floor, and fractured her hip. She was hospitalized for treatment.",1
"A cart had been loaded with 2""x4""s.  The cart has two wheels in the middle, front, and back on both sides.  The day shift had used half of the lumber, pulling the lumber from one side.  Approximately 40 2""x4""s remained stacked on the other side of the cart.  The second shift employee started to move the cart to his saw, where he cuts the lumber to specified lengths.  As the employee was moving the cart, the cart fell over onto the employee's legs breaking both legs below the knee.",1
Two employees were removing a reach rod.  One of the employee was on the top deck lifting the reach rod while the other employee was trying to remove a pin. The reach rod slipped smashing the employee's finger. The employee's left ring fingertip was amputated.,0
"While using a core drilling machine, an employee's hand was caught in the core drilling cylinder, amputating the right index finger.",1
An employee was shot two times by a robber while closing the store.,1
"On February 17, 2016, an employee was installing a fascia and fog lamp on a car. As he was pulling on the wire to connect the fog lamp, he struck the car and punctured his right hand between the index finger and thumb. The injury became infected and required hospitalization.",1
An employee was using a lathe while wearing cut resistant gloves.  A glove became entangled in the lathe and the employee's hand was degloved when he tried to remove it.,1
"An employee's arm was severely cut while he was removing a piece of sheet metal from the upper shelf, resulting in hospitalization.",1
An employee was checking the fluid levels on a tug and amputated the left index fingertip when the hood of the tug slammed down on his left hand.,0
"An employee was exiting a parked vehicle on the jobsite, slipped on ice, and fell onto concrete. The employee suffered a concussion and a compression fracture to the back.",1
"An employee was on break and eating lunch in the store deli. She was seated in a chair that had a loose seat bottom.  While scooting her chair closer to the table, she got her right ring finger caught between the loose seat bottom and the chair's frame. When she sat back down she tore the flesh off the distal joint of her right ring finger. She was transported to the local hospital where doctors had to amputate the distal joint.",1
An employee was cutting plastic tubing using an arbor press and suffered a fingertip amputation.,1
An employee's middle finger was caught in-between the hydraulic cylinder and the platen while trying to move the die that was hooked up to the overhead gantry crane hoist. The employee's middle left finger was partially amputated.,1
"On February 17, 2016, an employee was exiting a scissor lift when his finger became caught in a cable attached to a locking pin.  The locking pin is used to hold a top rail into place at the end of the scissor lift.  The employee's right ring finger was amputated down to the second knuckle.",0
"An employee was traveling from the second floor to the first floor and was about halfway down the first run of stairs toward the platform when he fell and landed with his face hitting the platform wall.  The employee suffered two fractured ribs, a punctured lung, a shoulder injury and a dislodged lower tooth.",1
"An employee was struck by a straight body international truck in the rear parking lot resulting in a collapsed lung, fractured lower back, left collarbone and fractured ribs.  He also sustained damage to the spleen.",1
"An employee was putting cardboard into the baler.  His hand was caught in the baler door while closing it. The employee's left hand was dislocated, fractured, and lacerated.",1
"An employee was pushing a stack of cardboard across the ground in front of her.  The cardboard struck a fixed object on the ground and ""jarred"" the employee.  The employee fell on her knee and cracked her patella.  The employee was hospitalized.",1
"On February 17, 2017, an employee slipped on the bathroom floor that was just mopped and suffered a knee injury.  The employee was hospitalized.",1
"An employee slipped and fell on black ice while walking in the parking lot on the way into work around 7:45 AM on February 17, 2016.  The employee was hospitalized for a concussion and stiches to the back of the head.",1
An employee was placing printing cylinders into storage and got caught between the hand cart and guard railing resulting in broken ribs.,1
"An employee was training soldiers on the new paladin military vehicle. The hatch for the driver's seat closed on his right hand, damaging his middle and index fingers requiring surgery.",1
An employee suffered a head contusion and a crushed right arm after a hand lift tipped over off of a lift gate.  The employee was knocked over and was struck by the hand lift.,1
"An employee was replacing the automatic arm for a tarp on a disposal truck. As he reached for a pin, the automatic arm moved and pinched his finger between the top and bottom arms, amputating his left index fingertip.",0
"On February 17, 2016, an employee was struck by the rear wheel of a powered industrial vehicle (Bobcat) resulting in a severe laceration requiring surgery.",1
A worker was off loading a truck and fell through the empty bay door resulting in a left hip fracture.,1
"A door closed on an employee's right pinky tip, severing it.",0
An employee was moving a 2' base plate with a fork truck and 1/2 inch chain. He caught his finger between the fork and the chain amputating the right index fingertip.,0
A worker slipped on oatmeal in the staff lounge and fell breaking an arm.,1
An employee's left-hand middle finger was amputated when a safe door shut on it. He required surgery.,1
An employee was repairing a piece of equipment when his thumb was crushed between the equipment.,1
An employee was manually adjusting a stack of empty boxes at the unloading dock.  Ice was present on the floor due to a leaking water sprinkler line.  The unloading dock is not heated.  The employee slipped on the ice on the floor and the empty stacked cardboard boxes fell onto him as he fell onto the floor. The employee suffered a broken right hip as a result of the slip and fall.  The employee was hospitalized for surgery.,1
"An employee was cleaning out trash from the bed of a truck at the PSO yard.  He stepped back and turned to throw out some trash and stepped on a plastic bottle. As he slipped and fell, his foot was caught between a fiberglass pole and the bed of the truck, breaking his leg.",1
An employee was injured during a snowmobile accident.,1
An employee was working from a 10 foot ladder and fell to the ground cracking two vertebrae in the neck.,1
An employee was cutting laminate flooring on a table saw when his left-hand fingers were cut by the saw.,1
"An employee was pulling a welder up to the catwalk with a rope when the left side of the catwalk railing broke, causing him to fall 25 feet to the ground below. His head hit a toolbox, and his back hit the platform railing. He was hospitalized with an L1 lumbar fracture and required staples for his head injury.",1
"An employee was attempting to free a frozen burial vault from the frozen ground. A coworker was using a backhoe to free the vault. The burial vault dislodged from the ground rapidly and struck the employee, crushing him between the vault and a wall. He fractured his pelvis and hip.",1
An employee was unloading pallets from his forklift when a coworker ran over his left foot and ankle with another forklift.,1
"While walking on stairs, an employee was electric shocked on his left side by the handrail. The stairs were located near where the ingots come off the line.",1
An employee was replacing the backing core of a tufting machine with a new primary backing when her right finger was caught between the backing jack and the backing core of the machine. Her right-hand middle fingertip was amputated.,0
"On or about February 18, 2016, an employee was settling trusses while standing on the top plate of the building being constructed. Due to high winds, a 100-foot section of approximately 50 trusses fell and knocked the employee off the top plate.  The employee fell 16 feet to the frozen dirt ground, suffering a broken wrist, shattered elbow, and head injury requiring stitches. The employee was hospitalized for surgery.",1
"While an employee was cutting a tomato with a knife, the employee's fourth left-hand fingertip was amputated.",0
"An employee was installing gas pipes when his arm was caught between two pipes, resulting in vascular injuries.",1
"An employee was heating a 40-foot steel beam to adjust its camber when the beam fell over and struck the employee's right leg, breaking the tibia and fibula.",1
"An employee was removing a door from an upper shelf and carrying it down using a step ladder when he missed the last two steps and fell on his left leg/knee, possibly fracturing his kneecap and tearing ligaments. He was hospitalized.",1
"On February 18, 2016, an employee attempted to clean the air filters on a plugged up industrial vacuum loader. He raised the motor section from the collection bin with the four built-in air bladders. The air bladders lost their pressure and the motor section dropped onto the employee's arm, pinching it between the motor section and the bin. His lower right arm broke.",1
An employee was operating an electric pallet jack when he lost control and his left ankle was pinned between the jack and a filing cabinet. His ankle broke and required surgery.,1
"A maintenance mechanic was adjusting the safety switch on a bread cooler when a shaft became loose and struck an employee in the abdomen/chest area, breaking three ribs. The shaft came out approximately 12 inches.",1
"On February 18, 2016, an employee was checking freight material that had been loaded into trailers when a coworker hit him with a powered industrial vehicle. He sustained broken bones in his foot, as well as bruises and lacerations to both legs.",1
"After stopping a press line, an employee walked between the press brake light curtain. The press then cycled and the dye post came down, hitting the employee's right arm. His right forearm and hand were amputated, and he was hospitalized.",0
"An employee went into the silo to make adjustments on the grain sweep. A coworker did not know that the employee was in the silo and turned on the grain sweep, which lacerated the employee's leg.",1
"An employee had just loaded a new car onto a railcar. As he exited the car and started to descend the railcar's fixed ladder, he lost his grip and fell approximately 15 feet to the ground. He fractured his back and left wrist and was hospitalized.",1
"An employee was adjusting the lacquer recycling machine. When the employee opened the machine to fix the bag, hot liquid sprayed out, causing second degree burns to the right side of the employee's trunk and head.",1
"An employee was working on a 12-foot A-frame ladder, attempting to thread a piece of pipe. While pushing the pipe to align it, he was thrown off balance and fell forward approximately 4 feet (from the 4th or 5th rung) to the concrete floor, suffering a head laceration, two broken wrists, dental trauma, and a bruised knee.",1
"An employee was unloading a flatbed truck that was carrying a PMC, which is a cookie-sheet type of pallet that carries cargo for airlines. He was pulling the PMC manually because the bed of the truck has a roller bed that allows the PMC to move the length of the bed without using a powered industrial vehicle once it is unhooked and all the hooks are removed. The employee's left foot became lodged between the vehicle and the bypass system. The PMC hit the employee's leg while it was stuck and broke it in two places. He was hospitalized for surgery.",1
"An employee was handling material (metal skin) on top of a table when the table tilted. The material fell on his left leg, causing multiple fractures.",1
"On or about February 18, 2016, an employee was processing a part down the chemical film line when the employee was exposed to hydrofluoric and nitric-mixed acid solutions, which chemically burned the employee's right thumb.",1
"A maintenance employee was making repairs on the production line, using a handheld grinder to grind metal, when sparks flew back and hit him. His shirt was oily and caught on fire, causing burns to his torso.",1
"An employee was working on an electrical box while standing on a ladder. He heard an explosion from a transformer and was startled. While attempting to dismount the ladder, he fell 12 feet to the level below, breaking his left leg.",1
"On February 18, 2016, at approximately 9:30 a.m., an employee was exiting a van at a conference meeting when she missed a step, fell, and struck her back on the step. She fractured her L1 vertebra and was hospitalized.",1
"While making a delivery, an employee slipped on ice at the customer location. The employee fell to the ground and broke a leg in two places, requiring hospitalization.",1
An employee was getting down from a truck and fell backwards off the truck.,1
An employee was closing the main cabin door and caught his left hand index finger between the door and aircraft resulting in a fingertip amputation.,1
The end of an employee's finger was pinched off while working. The employee was hospitalized and the fingertip was surgically amputated.,0
"A crane was lowering an arbor into the bell of a flute machine while an employee guided the arbor into position. The employee's right middle finger was caught between the arbor and the bell  housing, and his fingertip was amputated.",0
"An employee was operating a drill press to drill holes in aluminum stock. When he adjusted the material, his finger contacted the rotating drill bit. His right index finger was amputated above the distal joint.",0
"An employee was unloading a transformer from a flatbed truck and was hooking up straps so the transformer could be moved by an overhead crane. The truck driver moved the truck, causing the employee to fall from the flatbed to the ground. The employee may have fractured both elbows.",1
"While an employee was trying to clear a jam on the brake press, the press activated, injuring both of the employee's hands and amputating a right-hand finger.",1
"On February 19, 2016, at approximately 8:15 a.m., an employee was cutting 6-foot lengths of fiberboard down to 43 inches using a miter saw. While holding the material with her left hand, she used her right hand to lower the blade of the saw. The blade made contact with and amputated her left thumb tip.",0
"An employee slipped and fell on a pile of rebar laying on the ground, injuring the hip.",1
"An employee was performing maintenance on a grinder machine, which was lifted up with a pin placed underneath. The machine fell and pinched the employee's fingers, amputating the right-hand middle and ring fingers at the distal joint.",0
"While slicing ham with a bone saw, an employee's left ring fingertip was amputated.",0
"An employee was installing a metal HVAC duct. As the duct was being lifted, the rigging failed, causing the duct to drop. The employee attempted to catch the duct as it fell, and his right hand was lacerated. He was hospitalized.",1
"While attempting to unjam a milk carton from the blow mold machine, an employee's right index finger was amputated.",0
"An employee's left pinky fingertip was amputated by a digger truck's rope drum, which was being used to pull a truck that was stuck.",0
"An employee was exiting a crane when he slipped, fell, and broke his right arm and right leg.",1
"While an employee was stacking lumber, the lumber fell on and amputated his right-hand middle fingertip.",0
"A maintenance employee was repairing a tapping machine. He was working underneath the machine. To access the conveyor belt, he was moving a product tray out of the way by pushing it. The tray came off the guides and tilted, and his finger was caught between the tray and the machine, amputating his left middle fingertip.",0
"While performing wood framing, an employee fell from a 10-foot ladder to the concrete floor, breaking ribs.",1
"While moving a table, an employee slipped and fell to the floor, fracturing his right hip.",1
"While accessing an area near a sprinkler system, an employee stepped on an exposed, protruding 1/4"" x 2"" concrete anchor, which punctured the employee's left foot and required surgery.",1
"An employee was standing on top of a masonry wall, removing the wall forms, when a wall form fell. The employee's personal protective equipment was attached to the form. As the form fell, it also brought the employee down 10 feet to the ground below, crushing the employee's left hand, fracturing the spine, and causing lacerations.",1
"An employee was pressing bacon when the press malfunctioned. While the employee was attempting to diagnose the problem, the machine cycled and crushed the employee's left hand in the point of operation, fracturing the pinky, ring, and thumb fingers and causing severe lacerations. The press was not locked out at the time of the incident.",1
"On February 19, 2016, an employee was cutting a steel beam with a grinder when the grinder jumped out of the cut and contacted the employee above the knee. He was hospitalized overnight with a right leg laceration.",1
"An employee was attempting to stop his assigned vehicle from rolling when he was hit by the door, knocked to the ground, and dragged. He suffered right hip and ankle injuries, as well as left knee abrasions.",1
"While exiting a van, an employee stepped and slipped on a patch of ice in the parking lot. The employee was hospitalized with a fractured ankle.",1
"On 2/19/2016t, at 1:55 AM, an employee was working on a production line when she tripped on an airline, fell, and rolled her right foot/ankle. She was hospitalized and required surgery for a fractured right tibia and fibula.",1
"An employee was cutting pieces of wood using a table saw. A piece of wood slipped and his right hand contacted the blade, cutting three fingers.",1
"An employee was bitten by a dog while delivering mail, requiring overnight hospitalization.",1
"An employee slipped on ice while walking outside, fracturing a leg and requiring overnight hospitalization.",1
A temporary worker crushed a finger resulting in the amputation of the digit up to the first knuckle.,0
An employee was stabbed by a patron after the bar had closed. There had been an earlier altercation in the bar between the employee and the attacker.,1
"An employee stocking fiberglass was trying to extend a table leaf. The employee's left fifth finger was caught between the table frame and the table top, resulting in a distal amputation.",0
"An employee was cutting a piece of wood with a table saw when the blade lacerated his right index finger, requiring stitches.",1
An employee fell while getting out of the dump bed of a truck he was washing. He struck his head on the concrete ground and fractured his skull.,1
"An employee was using a wrench to remove snow that was blocking the magic carpet conveyor belt machine. As soon as the snow was released, the conveyor started going again and grabbed the wrench. When the employee tried to grab the tool, she was trapped under the conveyor belt bar, breaking her right humerus.",1
"An employee was taking out the trash on February 20, 2016. When she opened the gate to the dumpster area, the wind blew the gate back at her and knocked her down, breaking her left hip and requiring surgery.",1
An employee was painting from the second step of a 4-foot step ladder when he fell backwards and hit the concrete floor. He suffered a bruise and was hospitalized.,1
"On 2/20/2016, at around 4:00 p.m., an employee was using a machine called a planner to prep the poly pipe for welding repairs when a short burst of flame occurred. The employee received second degree burns to the side of the face and neck and was hospitalized overnight.",1
"An employee was taking pictures at the finish line of a track event. One of the participants finished the race and turned toward the employee. The runner struck the employee, knocking her to the ground and fracturing her right ankle.",1
An employee's left middle fingertip was amputated while reaching for a part on a press.,0
An employee was driving a golf cart to a service call when a valet ran a stop sign and struck the cart. The employee suffered three broken ribs.,1
"A steel coil tipped over on an employee, who was hospitalized with contusions.",1
An employee sustained an amputation of the right middle fingertip while using a meat saw.,0
"A maintenance employee was repairing and troubleshooting a high-speed overhead door. The employee's left middle and ring fingers were pinched in the overhead roller, amputating the fingertips.",1
"An employee was sitting on a skid of 2x4's being transported on a forklift driven by a coworker. The employee fell off of the skid and was run over by the forklift, fracturing/crushing his arm.",1
"An employee made contact with a conveyor roller, which pulled him into the conveyor. He sustained a possible left shoulder fracture.",1
An employee contacted a wall with his hand while engaged in horseplay and caught his finger on a screw. His finger split open to the bone and required surgery.,1
An employee was pushing a BiPAP machine into the store room of the respiratory department and cut their thumb on the edge of the machine. The employee was later hospitalized for an infection.,1
An employee was walking into her work space to begin her shift when her shoe got caught on the carpet and she fell breaking her left shoulder and left knee.,1
"An employee was removing some debris from a conveyor belt when another worker cycled the machine, causing the employee's right index finger to be crushed and partially amputated between two pallets.",0
"An employee was moving a sterile processing tray, which contained surgery instruments and weighed approximately 28 pounds, when the tray started to tip. While trying to prevent the tray from tipping, the employee suffered a back strain and required hospitalization.",1
"An employee entered a freshwater, 3000-gallon tank to replace spray nozzles and was exposed to steam mist and residual chemicals that were left in the tank from the clean-out process. He experienced nausea from inhalation exposure and was hospitalized.",1
"On or about February 21, 2016, an employee fell approximately 2 feet from a feed trough and sustained head and back injuries.",1
"While descending a ladder, an employee missed the second to the bottom step and fell to the concrete floor. The employee fractured the left side of the hip.",1
"An employee was starting work on a precipitator and was using a sleever bar to remove the door, which was 18"" x 18"". He removed the bolts and some of the silicone from the door, but the door would not open.  He went to the front of the equipment, removed the inspection window, and used the sleever bar to reach inside, at which point he was electric shocked. The electrical current went in his left ring finger and out through his right foot.",1
"An employee was standing on top of water pumps to reach a power disconnect. The frame bolts on one of the water pumps were corroded, and the employee's weight caused the pump to break loose and release hot water. The hot water contacted the employee, causing second degree burns to the legs and the lower back.",1
"An employee was grinding the joint of a pipe when another joint of pipe rolled and struck the employee on the right side of the head, fracturing the skull.",1
An employee attempted to walk an angry customer out of the store and was assaulted and stabbed by the customer. The employee was hospitalized with a stab wound to the chest and a lacerated heart.,1
"On or about February 21, 2016, at approximately 9:40 a.m., an employee operating a wool separator machine was attempting to clear a jam when his hand was caught in the machine. He suffered an avulsion that required hospitalization for stitches.",1
An employee was fastening a tug boat to a barge when his fingers were crushed between the boat knee and the barge. His left index and middle fingertips were amputated.,0
"An employee was handling a conveyor belt that was soaking in a tank of chlorine and water. The chlorine liquid splashed on the employee's legs, soaking his pants. He suffered chemical burns on both legs and was hospitalized.",1
"While walking 63 feet away in the equipment yard, an employee was struck on the left thigh by a piece of metal debris that broke off from the jack hammer bit on an excavator.",1
"While exiting a bathroom, an employee turned a corner and tripped over a student's rolling back pack. The employee fell to the ground and fractured her left shoulder, requiring hospitalization and surgery.",1
"Employees were standing in front of an extrusion machine studying a test run of material while other employees were grinding on the mold. A sudden release of pressure forced material and components out of the mold. As a result, an employee suffered multiple face fractures, a laceration above the right eye, broken fingers, and broken ribs.",1
"An employee was using a shovel to perform foundation work when a skid steer backed up and ran over the employee's leg, breaking it.",1
"An employee was involved in a physical altercation with a co-worker, suffering broken teeth, facial fractures, a swollen eye, and back injuries.",1
"While an employee was adjusting a press die, the embossment press cycled and crushed his forearm in the point of operation.",1
"An employee standing on an 8-foot ladder was using a hammer to remove wooden blocks wedged between the door and the wall. When the last block was knocked out, the door shifted and caused the ladder to fall. The injured employee was approximately 5 feet high when his foot slipped off the rung and went through the ladder. He fell to the ground and fractured his lower leg.",1
"While slicing deli meat, an employee slipped on a piece of meat on the floor and fell, breaking her right hip and right wrist.",1
"A two-man crew was retrieving trash/debris from a dumpster in the alley behind a bakery. The process involves a truck, which is specially outfitted with a hoisting mechanism and an automatic tipping device. The device lifts the dumpster off the ground and dumps the debris into a hopper attached to the rear of the truck. While the device was lifting the dumpster, the injured employee's left-hand fingers were caught between the lifting mechanism and the trunnion bar. His middle fingertip was amputated.",0
"An employee attached a tagline on some pipe casing. When the pipe was picked up, his foot was tangled in the tagline, ultimately breaking his ankle.",1
An employee's right thumb became caught in a mixer he was operating and was amputated at the first knuckle.,0
"An employee was training a coworker on an automated press. The press wasn't cycling properly, so the employee attempted to adjust a part. At this time, the coworker inadvertently cycled the press using the two-hand controls. The press ripped the skin off of the back of the employee's hand (partial de-gloving).",1
"The employee was troubleshooting a case alignment problem on the can line palletizer and noticed that the can case was misaligned. While he was examining the layer formation section of the palletizer, the machine cycled. The layer formation bar hit and fractured his right forearm.",1
"On February 22, 2016, two employees turned off a jammed candle-making machine to service it. As the first employee was attempting to pull something out of the machine, the second employee turned it on, crushing the first employee's right-hand middle finger. His finger was surgically amputated.",0
"An employee was doing a pre-trip inspection on a tractor trailer unit before driving it back to the facility for preventative maintenance. While doing this, the employee slipped on the rainy and muddy surface, fracturing the radius and ulna.",1
An employee installing gutters on a house fell off an extension ladder that was sitting on a porch roof. He then rolled off the porch roof to the ground and was hospitalized with a compression fracture of the lower back.,1
An employee was trying to clear a jam on a machine when part of the machine struck and fractured his right femur.,1
"An employee was blowing chips off parts and fixtures with compressed air in preparation for the next machine set up when he tripped and fell over a tooling post, injuring his hip and requiring surgery.",1
"An employee was struck by a coworker operating a double rider vehicle, suffering lower leg lacerations.",1
"An employee stumbled and fell while standing up from a chair. The employee fell to the concrete ground and fractured the left hip, requiring surgery.",1
"On February 22, 2016, at approximately 6:05 p.m., an employee was covering overhead lines with blankets and hoses to replace damaged lightning arrestors when an electrical arc occurred. The arc caused first degree burns to the employee's face and neck, requiring hospitalization.",1
"While working on nearby equipment, an employee drew an arc of approximately 12 inches from an unpowered electrical line. The power in the line was induced into the circuit from a nearby power source. The employee suffered an electrical shock/burns to the pointer finger and thumb.",1
"An employee fell approximately 8 feet from a ladder while installing a sign, suffering a fractured hip that required surgery.",1
An employee was preparing stock for the morning shift when his left foot was caught between two forklifts he was operating. The employee was using a stand-up and sit down forklift at the same time.  His foot was mangled between the forklift forks.,1
"An employee was unloading steel poles from a trailer. The employee was on the trailer during the rigging, trying to locate the center gravity of the poles. Once he located the center gravity, he went to the other side of the trailer to get off. He lost his balance, slipped, and grabbed one of the rebar supports on the trailer. At that time, the operator began lifting the pole upward. As the pole was lifted, it swung toward the injured employee and caught his right hand between the rebar support and the steel pole. His right middle fingertip was amputated and his right index finger was lacerated.",0
"An employee fell 20 feet from a roof while delivering shingles to a customer site, suffering blunt trauma.",1
"An employee was standing at the rear of their vehicle, sorting mail to be delivered. An approaching truck struck a nearby car, causing the car to veer and strike the employee's vehicle and right leg. The force of the impact caused the vehicle to be pushed up on the sidewalk. When it rolled back towards the street, it ended up on top of the employee. The employee was hospitalized with a right leg injury and possible left leg injury.",1
"A maintenance employee was stepping down from a scissor lift when his wedding ring was caught on the safety chain from the lift gate. His left ring finger was amputated above the second knuckle, requiring hospitalization and surgery.",1
An employee was loading a refrigerator into the back of a truck when the blade that pushes debris into the truck caught his gloved left hand and partially amputated his middle and ring fingers.,0
An employee was restocking janitorial supplies in the ladies restroom when a wooden cabinet fell off the wall and struck the employee. The employee was hospitalized with a broken right femur.,1
"An employee was lifting an object with a crane when the object fell onto the employee's left foot, amputating all of his left toes.",1
"On February 22, 2016, at about 10:39 a.m., an employee was delivering a propane gas tank when he fell from the gangway to a barge and into the water, injuring his eye. He was hospitalized and had surgery for a possible eye socket fracture.",1
An employee was loading a filter into a casing while a coworker pushed the other end. The employee's fingers were pinched and his right-hand index and middle fingertips were amputated.,0
"On or about February 22, 2016, while using the table saw to cut card board, the cardboard slipped and the employee's finger contacted the rotating saw blade resulting in an amputation injury.",1
An employee was pulling hose to connect to a pump when his hand slipped and his left middle finger struck the moving impeller of the pump. His finger went down the intake pipe and his left middle fingertip was amputated.,0
"An employee was sandblasting metal parts when he lost control of the sandblasting gun. The gun dropped and spun around, blasting him in the stomach. His stomach was lacerated and required surgery.",1
"An employee was loading work equipment into her car when she slipped on ice in the parking lot and fell, breaking her arm, shoulder, and humerus.",1
"An employee's hand became caught in a moving conveyor chain as a conveyor was being tested on February 23, 2016. His second and third fingers were amputated.",0
"While cleaning, an employee fell approximately 8 feet through an open hole in the floor, suffering a broken hip.",1
"An employee was returning to her work area carrying a case of water bottles on her right shoulder.  She was walking down a catwalk and came to a 4-step elevation change. As she walked down the steps, her left foot became entangled in some air hose, causing her to lose her balance.  As she stepped down with her right foot to regain her balance, she stepped on more air hose, which caused her ankle to roll. When she brought her left foot back up, all of her weight went onto her right ankle. She dislocated her ankle and fractured her tibia and fibula.",1
An employee was performing maintenance on a customer propane dispenser when he suffered liquid propane burns to his hands.,1
"An employee was examining the underside of a bus when he tripped over the vehicle jack and fell, suffering internal bleeding.",1
An employee using a pneumatic nail gun was shot in the right forearm when the nail came out the back of the gun.,1
"An employee was parking a truck on the dock. As he lifted the electronic dock with his right hand, the lift gate came down and fractured his right ring finger, causing a partial amputation.",0
"On February 23, 2016, at 3:00 p.m., an employee was using a floor waxing machine when he tripped over the cord and fell to the ground, striking his head.  He was hospitalized.",1
An employee was walking in the parking lot to the facility when he was struck by a yard truck that was moving trailers to different docks. The employee fell to the ground and suffered blunt force trauma to his head. He was hospitalized for surgery.,1
An employee twisted and fractured his ankle while stepping off of a step on his mail delivery route.,1
"On February 23, 2016, at approximately 10:40 am, an employee and his crew were clearing a powerline right-of-way. A 1/2-inch rope was placed in the tree and held by the foreman. The employee notched and back cut the 26-inch diameter poplar tree, 107 feet in height. Using the 1/2-inch rope, 120 to 150 feet in length, the foreman began tugging on the rope to assist the tree to the ground. Once the tree was safely on the ground, the foreman yelled ""clear"" and no one answered. The foreman found the employee on the retreat path, face down on the ground, in the opposite direction of the felled tree. The employee was rolled over and his face was covered with blood. He suffered face and head injuries and was hospitalized.",1
An employee was in the bathroom when she slipped and fell. She was hospitalized with bone damage.,1
"An employee was loading a stack of steel beams when they fell on top of him, fracturing his pelvis and collapsing his lung.",1
"While mopping the floor of the kitchen, an employee slipped and fell, striking the back, shoulder, and head on the tile floor. The employee was hospitalized overnight with bumps and bruises.",1
"An employee stepped backward onto the wheel of an office chair and fell, fracturing the left wrist.",1
"An employee had just delivered a load of steel to the galvanizing plant to be coated, and a load of galvanized steel had been loaded onto his trailer for the return trip. He climbed onto the flatbed trailer, positioned the tie down straps used to secure the load, and was climbing down the rear step/bumper to get off the trailer when he slipped and fell, breaking his right leg.",1
"While operating a stacker machine, an employee attempted to remove a fallen product container that was blocking a sensor that controlled the conveyor. When the fallen container was removed, the conveyor began to move. The employee was wearing cut resistant gloves, and the glove on her right hand was caught by the chain and sprocket of the chain conveyor. She right-hand middle finger was partially amputated and required surgery.",0
"On February 23, 2016, an employee was trying to access the roof when he fell approximately 11 feet from an extension ladder to the lower roof level. He dislocated his kneecap and required surgery.",1
"An employee climbed an 8- to 10-foot ladder to open the door to a confined space. The door was under pressure, and as the employee opened the final latch, it came open and knocked the employee from the ladder. He fell approximately 8 feet, fracturing his skull, breaking several ribs, and puncturing a lung.",1
"An employee fell from a screen plant and suffered neck and back fractures, requiring overnight hospitalization.",1
An employee bent down to pick up a post while installing a silt fence when a snake bit his finger.,1
"An employee was reaching for a 2x4 board while working with the planer in-feed table. The employee's right thumb went through a 1.5-inch gap in the guarding and was caught between the tipple chain and sprocket, amputating the first digit of the right thumb.",0
"An employee was working on overhead powerlines when an arc flash occurred, causing second degree burns to his face, neck, and arm.",1
"An employee slipped and fell on a wide marble stairway at a client's facility, suffering head, back, and leg injuries that required overnight hospitalization.",1
An employee was using a pneumatic cut-off saw to cut a nail when the blade broke and amputated his left ring finger at the second knuckle. The saw was unguarded at the time.,0
"An employee was ripping panels when a build-up of sawdust and wood waste on the table saw caused the guard to be pushed up. When the employee attempted to clear the buildup, the blade amputated 1 inch of his right ring finger.",1
An employee was working on building trusses when he fell 12 to 14 feet from the truss. He suffered a brain injury and broke his neck and ribs.,1
An employee installing a metal roof on a pole barn fell through a plastic skylight approximately 15 feet to the ground and was hospitalized.,1
"On 2/23/16, an employee sustained an amputation of the ring and middle fingers on his right hand while operating a cutting shear.  The employee was holding a piece of metal in place while another employee operated the pedal for the shear.",0
An employee's fingertip was amputated while clearing a jammed production part from an assembly machine.,0
"An employee was replacing a pyrite gate on a pulverizer when the gate slipped and struck the end of the employee's left index finger, resulting in a partial amputation.",0
"An employee was struck by a suspended load (2x4) that was being hoisted by a crane. The material fell approximately six stories onto the employee's back, breaking ribs and a shoulder blade and puncturing the employee's lung.",1
"While an employee was inflating the air pressure on the tire of a truck, a fault rim ejected from the tire and hit his chest. He then fell backward onto the ground and suffered a mild head injury.",1
"On February 24, 2016, at approximately 4:00 p.m., an employee placed a 64-inch post in the saw. The blade hit a knot in the post and pulled the employee's hand into the blade, amputating the left thumb tip.",0
"An employee was attempting to move a log. He was riding on a box (5' long x 3' high x 4' wide) and the box changed directions, causing him to fall. His right foot slipped and was caught between the railing and the guide roller. His foot was crushed and lacerated between the fourth toe and pinky toes, and his big toe was dislocated.",1
"An employee was pushing tubing into a draw bench when a trolley caught the employee's fingertip, causing an avulsion.",0
"An employee was pumping fuel from his truck to an aboveground tank when the system malfunctioned and the fuel leaked, causing the truck to catch on fire. To avoid the fire, the employee quickly exited the truck and hit the ground, breaking his leg.",1
An employee was burned by an arc flash that occurred while the employee was performing routine maintenance readings on a distribution pump.,1
"On or about February 24, 2016, at 7:30 a.m., an employee was unjamming a plastics grinder when his right middle fingertip was amputated by the grinder's spinning blades.",0
"An employee was dusting off his work station when his thumb was caught in a chain and sprocket, amputating his right thumb tip.",0
"While walking between conveyor belts, an employee's right forearm was caught and mangled by a conveyor belt.",1
An employee was cutting plywood on a band saw when the blade partially amputated his left index finger at the first knuckle.,0
"An employee went into a food preparation room when she tripped on a rug, causing her to fall and fracture her right femur.",1
"An employee was diagnosing an issue with the pallet stacker when the load backrest fell and struck the employee, breaking the right big toe and injuring the second toe.",1
"While exiting the break room, an employee tripped over a person in a wheelchair. He fell and broke his hip bone.",1
An employee was unloading a metal table from a trailer with coworkers when the table flipped and landed on top of the employee. The employee was crushed and required hospitalization.,1
"An employee's left thumb was fractured after it was caught in a closing door, requiring hospitalization.",1
An employee was delivering parts to an assembly plant when he became caught in a conveyor. His left leg fractured and he suffered muscle damage.,1
"An employee was taking the tarps off his trailer when he fell approximately 5 feet, fracturing his skull and rib and suffering a collapsed lung.",1
"An employee's sweater was caught in a large ironing machine, which pulled her arm into it.  She suffered a possible broken arm and shoulder injuries.",1
An employee was operating a power stock lift when he fell off and was run over. His left leg was injured and required surgery.,1
"An employee was standing on the edge of a metal tub approximately 1 foot from floor level when his foot slipped off the tub, causing an abrasion to his lower left leg. His injury became infected and required hospitalization.",1
An employee was putting down plywood to cover a hole when he fell through the hole and fractured his skull. He was hospitalized.,1
"An employee was descending an extension ladder at a construction site when he fell approximately 15 feet to the ground below, suffering fractures and lacerations.",1
An employee using a warehouse lift to stock televisions fell approximately 15 feet from the lift to the floor. The employee suffered a head injury.,1
An employee was working on a ladder installing lights and fell resulting in a broken wrist and sternum and a collapsed lung.,1
"On or about February 24, 2016, at 11:20 am an employee stumbled and fell to the floor. She hit her forehead and incurred a deep muscular bruise to the right hip. She was kept by the hospital overnight for observation and physical therapy treatment.",1
"An employee was attempting to move the test set power cable from a disconnect/receptacle to the service on the wall. After turning off the power supply, the employee unplugged the cable to plug it into the wall outlet. The employee inadvertently touched the cable capacitor, which still contained some residual voltage after it was unplugged from the test set, and was shocked on his left hand.",1
An employee lacerated and broke bones in the left forearm while changing tools on a machine.,1
"An employee was troubleshooting an electrical ground fault. As he went to tighten the lug, an arc flash occurred and burned both hands and both arms.",1
An employee's right forefinger was smashed between a sheet of glass and the lifting arm.,1
"An employee was performing maintenance on a log-bucking saw and locked it out to replace a hydraulic valve. He then had to re-energize the valve to bleed out air from the hydraulic cylinder. When moving the cylinder in and out, his finger was pinched between the saw guard and saw structure. His left-hand middle finger was amputated at the first joint.",1
"On 2/25/16, a powered industrial truck was moving a punch press (steel stamping machine) when the press fell on top of an employee working in the area. The employee was hospitalized with a broken arm.",1
"On February 25, 2016, an employee was inspecting parts on the transfer table when the rotating shaft grabbed the employee's glove and amputated his left thumb.",1
An employee's right index finger was amputated while attempting to remove a plastic bottle from a drive chain.,0
"An employee was trying to unclog an asphalt distribution (spreading) machine. When he opened up a porthole, the pressurized pump caused hot liquid asphalt to shoot out and burn the palm of his right hand.",1
"An employee was unloading equipment from a cart. The base of the cart dropped while he was still holding the handle, and his right fifth finger was amputated in a pinch point.",0
"An employee was lifting an overhead truck door when his left foot slipped off, causing him to fall 12 inches and strike his knee on the truck bumper.",1
"A maintenance employee was changing out a control transfer in a motor control cabinet when an electric arc occurred, causing burns to his face and arms.",1
"While standing next to a chute, an employee was hit on the head by a piece of metal coming down the chute. The employee suffered a laceration that required stitches.",1
"An employee was tightening a safety stand to a pole when the pole shifted, causing the safety stand to move and catch the employee's fingertip between the stand and pole. The fingertip was amputated.",0
An employee was removing the existing membrane from the roof deck when he fell approximately 25 feet through metal decking to the ground below. He suffered a broken arm and broken facial bones.,1
An employee was adjusting a beam inside the nacelle when his finger was pinched between the beam and the beam bracket. His left ring fingertip was amputated.,0
"As he was tightening a bolt on a piece of equipment, an employee's left hand was caught and fractured between a piece of metal slat and a sprocket.",1
An employee fell 20 feet from a scaffold and broke the right foot.,1
An employee was reversing an electric stand-up forklift when their foot was pinched between the forklift and a concrete wall.,1
An employee was taking trash out through the loading dock to the dumpster. The employee fell over a dock chain to the ground and suffered facial fractures.,1
"On 02/25/2016, an employee inhaled a vapor cloud containing sulfuric and hydrofluoric acid due to a process leak at the facility. The employee was hospitalized with a sore throat and difficulty swallowing.",1
An employee was trying to latch the hinged walkway on the in-board side of a turn press. His supervisor pushed the platform to latch it while the employee's hand was in a pinch point. His right ring finger was partially amputated between the latch and platform.,0
An employee was assaulted by a coworker and suffered a brain injury.,1
"An employee was moving a crane at a customer's site to inspect it. Steel coil weighing approximately 40,000 pounds was still in the lifting device attached to the overhead crane. The employee attempted to remove the coil and it moved towards him, pinning him at the right shoulder. He broke his collarbone, arm, and right ribs, and also potentially suffered internal bleeding.",1
An employee received an electrical shock while performing maintenance on a room HVAC unit.,1
An employee amputated the left middle fingertip while operating a hand held router.,0
"An employee was delivering packages, slipped on ice and fell scraping and cutting his elbow. The employee was later hospitalized for an infection.",1
"An employee was lifting up a tea kettle and spilled hot water. The employee's chest, arms and stomach were burned.",1
An employee was attempting to prevent a patient from falling.  Both the patient and the employee fell to the ground. The employee's left knee cap was fractured as a result.,1
An employee was leaving a patient's home and tripped and fell injuring her left knee.,1
An employee was cutting hose from a spool and stepped on a piece of wire from the hose. The employee suffered a puncture wound to the left foot and twisted his left ankle.,1
"An employee was cleaning mud from a roadway while a trackhoe was being operated nearby. A car came over the hill in the same lane as the employee. When the employee stepped out of the way, he moved in the direction of the turning trackhoe. His overalls were caught by the track, which pulled his left leg underneath. His left leg below the knee had to be surgically amputated.",0
"On or about February 26, 2016, an employee was feeding material into a shear when the employee's fingers entered the shear point. The employee's finger was amputated.",1
An employee was attempting to lift a large heavy die using a crow bar when the die fell on the employee's fingers. The employee's right index finger was partially amputated and the thumb was seriously injured.,0
"An employee was transferring formic acid from a leaking tote to a new tote. The new tote's valve was open, which allowed the formic acid to run out onto the ground. The employee walked toward the tote, slipped, and fell onto the formic acid, suffering third degree burns (right leg, backside, right ear, and hands) that required hospitalization.",1
"An employee was inspecting windows at a customer's home while standing on the third step of the interior stairway. As he was turning to come down the stairs, he fell and landed on the hallway floor, fracturing his ankle.",1
"While an employee was checking for an air leak on the die-cutting machine, the machine was activated by the foot pedal. The employee's left index finger was amputated. The machine was unguarded at the time.",0
An employee was trying to put plastic up on a building to protect it against the elements. The wind caught the plastic and knocked the employee off the 12-foot ladder. The employee suffered a hairline fracture of the lower back.,1
An employee was showing a coworker a problem with a handgun that would not eject its cartridge. The employee was able to pull the slide back when the cartridge went off. A portion of the bullet went through the employee's hand. A bullet fragment also struck a second employee in the left ankle and heel.,1
"An employee was repairing loose, serrated, expanded metal grating. When he lifted a piece of grating, his middle fingertip was caught between the top piece of grating he was moving and another portion of grating. His fingertip was amputated (no bone loss).",0
An employee was in a bucket running wire from a transformer when they received burns across the upper torso and hands due to an arcing power line.,1
"While walking in the parking lot, an employee was struck by a customer's vehicle that was backing out of a parking space.",1
"An employee was beveling a pipe with a grinder. The employee put down the grinder after beveling the pipe, placed his hand on the elevated skid, and looked into the pipe. The pipe started to roll and crushed his right index finger, which was partially amputated.",0
An employee fell 18 feet from a ladder to the ground while working on a roof.,1
"An employee was cleaning out the bed of his dump truck while holding the tailgate with his right hand when the tailgate came down on his right middle finger, amputating the fingertip (no bone loss).",0
"On February 26, 2016, an employee had unloaded a load of salt water from the trailer before bringing it to the shop to help a mechanic remove bolts from the lid on the first hatch to replace the scrubber ball. They tried using vice grips and wrenches, but were unsuccessful. The employee proceeded to use a metal die grinder to attempt to remove the bolts while the mechanic walked to the tool room. Both the employee and the mechanic reported that they heard a whistling sound. At some point the vapors left behind after unloading the salt water ignited causing a flash fire. The employee's left forearm was burned.",1
An employee suffered an amputation injury while cutting particle board on a table saw.,0
An employee was walking next to a forklift. A railroad rail fell from the forklift and struck the employee's right leg resulting in a lower leg fracture.,1
An employee was removing wiring and sensors from the top of a Tainter gate retaining wall. The employee fell 10-16 feet from the retaining wall and fractured vertebrae in the back.,1
An employee experienced an amputation of the left pinky finger while guiding a rod out of a well. The rod was sticky and grabbed the employee's gloved left hand and spun it counterclockwise resulting in the amputation of the pinky finger and dislocation of the ring and middle fingers.,0
An employee experienced lower back pain from lifting a heavy pail.,1
An employee was riding a tug. The extinguisher in the tug went off causing a respiratory irritation that led the employee to have an asthma attack.,1
"An employee was working at the pipe threading machine. As the employee walked away from the machine, he tripped over a tripod leg of the machine and fell breaking the left hip.",1
"The injured employee was on the deck of a ship, lashing containers and locking them down to the ship. The injured employee's right hand was resting on a container on the deck. A crane operator was bringing another container onto the deck. The employee's right thumb tip was smashed between the container that was already on deck and the container that was being set in place by the crane.",0
"An employee was operating a CNC machine that had a chip conveyor extending from it. The employee turned the CNC machine off to retrieve a chip ball piece of scrap from the conveyor. As he was retrieving the scrap, the machine was unintentionally activated. The employee's glove became caught in the moving parts and his fingers were caught where the conveyor meets the CNC machine. His left-hand index and middle fingers were partially amputated.",0
"An employee was operating a plasma cutter to cut parts from a sheet of steel. When he attempted to adjust a part, his right index fingertip was amputated between the machine and the steel plate.",0
"An employee was struck on the back by a large metal pole, cracking two ribs.",1
"An employee was putting metal bands into a trash can when his left index finger was caught between the steel cans, partially amputating the finger at the nail.",0
"An employee stepping down from his truck cab missed the steps and fell approximately 2 feet to the ground, fracturing his ankle.",1
"While placing a hide in clamps, an employee's thumb was caught and crushed in the clamp.",1
"On February 27, 2016, at approximately 6:20 a.m., an employee fell off a load of drywall on the back of a truck while preparing to unload it. The employee fell approximately 15 feet to the ground, fracturing vertebrae and suffering a concussion. The employee required head staples.",1
"An employee was struck by a field truck while preparing to harvest tomatoes, injuring his left leg and lower back.",1
An employee broke his middle finger while attempting to recoil a garage door cable.,1
"An employee fell approximately 15 feet through the floor of an enclosed scaffold structure while working on a bridge. The employee suffered a broken leg, wrist, and arm and was hospitalized.",1
An employee fell off a ladder and broke two ribs.,1
"While attempting to remove buildup from a concrete ledge, an employee fell from a 10-foot portable A-frame ladder to the ground. The employee's left elbow broke and required surgery.",1
An employee's left thumb was amputated to the first knuckle while the employee was inspecting the drain plug on the bottom of a chemical mixer.,1
An employee was struck by a large 4  ft. X 2 ft. piston while cleaning a dough machine resulting in trauma to the forearm.,1
An employee loading freight from a truck to a railcar got his hand crushed when the rail car sliding door closed and pinched his hand between the door and the door jamb. The employee sustained crushing injuries and lacerations to the right hand.,1
"An employee was using a drilling machine when a 6-inch collar fell and struck the machine, causing it to rotate and strike the employee's left leg. The employee's left femur fractured.",1
"An employee slipped and fell against the wall and floor while trying to assist a falling patient, breaking her left arm.",1
An employee's left hand was cut on a chiller guard on 2/26/16 at approximately 10:00 p.m. He was hospitalized when the wound became infected.,1
"An employee was assaulted by a patient during discharge, suffering back and right hip injuries and requiring hospitalization.",1
An employee suffered an amputation injury while closing a door.,0
An employee's fingertip was amputated after contacting the belt of a running air compressor while  attempting to repair the machine.,0
An employee's right hand was amputated while cleaning out material from a knife gate.,1
An employee was loading material into the slitter machine when his hand and arm were pulled into the machine.,1
An employee completed his shift on 02/27/2016 when he began coughing uncontrollably. The employee was later admitted to the hospital and diagnosed with chemical induced pneumonia.,1
"An employee was holding a 2 x 4 stake while a coworker hit it with a sledgehammer. The coworker struck the employee's right index finger with the sledgehammer, breaking bones in the employee's right hand.",1
"An employee was on the first floor when he was called down to the basement level to assist with a repair. Coworkers had drained water from a boiler into a sump pit, which was approximately 3 feet deep and 2 feet in diameter. There was no cover on the pit, and the sump pump had trouble keeping up with the volume of water being added and quickly filled up. When the employee came down from the first floor to help, he fell into the sump pit and suffered second and third degree burns on his lower torso, legs, and hands. He was hospitalized.",1
"An employee was lowering a trailer door when his foot slipped off the trailer bumper, causing him to fall forward. The trailer door came down on his left arm and broke it.",1
An employee missed a rung while climbing a fixed ladder and fell 15 feet. He suffered multiple right leg fractures and shattered his right ankle.,1
An employee was loading materials into a storage room. His finger was caught on the hinge side of a door resulting in a fingertip amputation.,0
An employee's hand was caught between the air conditioner belt and pulley on a tree cutter machine.  The employee's left hand was crushed and the employee was hospitalized due to the injury.,1
On 02/29/2016 an employee was grinding a steel plate when the work stock got wedged. The work stock flipped up pinching his thumb tip between the work stock and the grinding disc. The employee was taken to the hospital for medical treatment. The employee's right thumb tip was later amputated.,0
"An employee was setting up a production machine. While adjusting parts, a hand was caught in the running machine resulting in injuries to the right hand.",1
An employee slipped and fell striking the back of his head.,1
"An employee was working on a pole using climbers. After the employee completed his work on the pole, he began to descend the pole. As he was descending, he ""cut out"" and slid down three to four feet while hugging the pole. He then let go and fell approximately 12 feet causing injury to his back.",1
"On February 29, 2016, at approximately 3:05pm, an employee suffered injuries after falling to the floor.  The employee was walking out of the Director's office, caught a shoe on a chair, and fell to the tile floor resulting in a loss of consciousness, nasal fracture, laceration to the lip, and bruising.",1
An employee performing a road call was struck in the face by a bottle jack that kicked out while he was servicing a truck alongside a public road. The employee was hospitalized for treatment of an orbital fracture and observation.,1
An employee was getting into the truck and scraped his leg on the step rail. The leg swelled and the employee was admitted to the hospital.,1
An employee was removing dust around the area of the blade on a band saw. The employee lost his balance and stumbled into the band saw breaking his left arm and lacerating his left hand and ring fingers.,1
"While descending a ladder with a nail gun, an employee tripped over the nail gun hose and started to fall. As he tried to prevent the fall, his finger activated the trigger and he was shot in the right leg.",1
"The employee was standing on a desk to measure the plastic cover on an overhead fluorescent light fixture. He stepped on the corner of the desk and the leg of the desk penetrated the 5/8"" plywood flooring. The employee fell three feet and fractured the right leg.",1
"On or about February 29, 2016, one employee was injured when he disconnected his PFAS to untangle the line and fell from the roof area breaking a leg.
",1
"An employee was troubleshooting a furnace when hot condensate that had built up in the vertical muffler of a steam vent line splashed onto the employee and caused first and second degree burns to the employee's back, shoulders, arms, posterior and legs.",1
An employee broke a leg while driving a forklift between piles of pallets.,1
"An employee was loading a pallet into a pick up truck using a forklift. The employee placed the pallet onto the tailgate of the pick up truck, then got off the forklift and proceeded to push the pallet into the pick up. The forklift moved forward slowly and a fork struck the employee in the arm and pinned his arm. The employee suffered two cracked ribs and a fractured forearm.",1
"On or about February 29, 2016, an employee's arm was crushed between the mold and plate while attempting to move the mold off the rollers.",1
"On or about February 29, 2016, an employee received a partial index finger amputation while working on the Magic Box A conveyor belt on the 500 Line in the Bindery Department.",0
An employee was performing maintenance on a truck. The truck brakes were on fire and employees used a fire extinguisher to suppress the flames. The employee then began adjusting the brakes and sustained a hand injury.,1
"An employee was putting wire on a U-shaped, steel channel frame, balanced on forklift tines, in order to attach the frame to an overhead crane.  The steel frame began to fall backwards, and the employee tried to maintain its balance causing the employee's right pinky finger to get caught between the forklift frame and the fork tines.  The employee's right pinky finger was removed from above the second knuckle.",0
"The employee was conducting preventive maintenance on a sit down lift truck. As he was removing a side panel, the battery rolled out and struck his left knee cap fracturing it.",1
An employee amputated the right ring fingertip in a pulley assembly.,0
"An employee was putting away a cart of headlight extensions in the store.  The employee turned to exit the store and walked out into a moving forklift.  The employee's right foot was injured.  The second, fourth and fifth digits (toes) were fractured and the big toe was dislocated.  The employee was hospitalized.",1
"On February 29, 2016, 2nd shift (2:30 p.m. - 11:00 p.m.) the injured employee was performing his regular job duties to assemble wooden crates with a pneumatic staple gun, nail gun, and other hand tools. At approximately at 6:40 p.m., the injured employee was adjusting his position to assemble the bottom of the crate that was enclosing a part placed on the pallet on the floor. The injured employee moved around the crate to position his body and inadvertently pressed or had something else press the staple gun's trigger to initiate the stapling cycle. Subsequently it came sideways in contact with his right leg area above the kneecap and resulted in a puncture wound.",1
"An employee was lifting 40' of material from a trailer using slings and a crane. While backing up to the edge of the trailer, the employee lost their footing, slipped and fell to the bottom of cement stairs landing on a tape measure causing a hip and knee injury.",1
"An employee was riding a Polaris Ranger vehicle gathering cattle on a ranch when it hit a bump. The rifle that he was carrying felt off the vehicle, hit the ground, and accidently discharged striking the employee in the leg.",1
An employee was rolling up lines and a piece of material fell and struck the employee on the shoulder. The employee sustained bruising/hematoma to the left upper back area and compression fractures of three thoracic vertebrae.,1
An employee was inflating a tire on an RV when a piece of molding flew off and struck another employee in the head causing a laceration.,1
The employee jump started a farm tractor with a screw driver.  The tractor was in gear and the throttle advanced.  The tractor started and ran over the employee resulting in multiple fractures.,1
"An employee was pouring used cooking oil into a disposal receptacle.  The oil was not sufficiently cool and as it was being transferred, it splashed on the employee's face and shoulder resulting in burns that required overnight hospitalization.",1
"An employee was setting up the CNC machine when the cycle button was hit, causing the spindle to turn and throw parts out. The parts hit, shattered, and broke bones in the employee's upper arm.",1
"An employee was walking across the roof of a barn carrying a piece of guttering when he stepped backwards onto a skylight. He fell through the skylight into the barn from a height of about 15 feet and landed on metal cattle pens and the concrete floor. The employee suffered broken ribs, a liver laceration, a fractured eye-socket bone, and an arm laceration.",1
"An employee was operating a locomotive crane when the crane tipped, bruising the employee's ribs.",1
"On 3/1/2016, an employee was performing maintenance on a pin-setting machine when his hand slipped and was caught in the pin-setting equipment while it was in operation. The machine caught the ring on the employee's left finger and amputated it.",0
"On 3/1/2016, an employee was guiding a large piece of steel as it was being moved by an overhead crane. The sling that was holding the piece broke during the move, and the piece of steel fell on the left side of the employee's body, amputating his left arm and crushing his left leg.",1
"On March 1, 2016, an employee was using an air hose to clean off a piece of machinery when he was caught in the spindle cutter. The spindle caught his gloved hand and pulled his left hand and arm into the moving parts of the cutter. His arm was amputated from the elbow down.",1
"While cutting material using a table saw, an employee's fingers contacted the blade, resulting in a finger amputation on 3/1/16.",1
"An employee was pushing a die cart when a wheel got stuck in a hole. As he went to push it out, he felt a pop in his left calf muscle. He was later hospitalized when his left calf became infected.",1
"An employee working on a residential roof slipped and fell to the ground, injuring his knee and back.",1
An employee was overcome by smoke when he responded to a smoke alert.  He went into an apartment and helped evacuate the tenants.  He was hospitalized for smoke inhalation.,1
"An employee struck the back of the right foot while dismounting a double pallet jack, suffering a laceration and slight Achilles tendon tear, which required overnight hospitalization and surgery.",1
An employee fell in the packaging department and fractured the left femur.,1
An employee suffered a fingertip amputation while cutting onions with a knife.,0
"An employee was pushing a food cart when wind caught the door of the cart, causing it to swing back and hit the employee's fingers. The employee's left-hand third digit was amputated.",0
"An employee was sitting on the back of a pick-up truck throwing salt. When he dismounted the truck to retrieve something that had fallen, he lost his footing and fell, hitting the back of his head and requiring hospitalization.",1
"On or about March 1, 2016, an employee was re-installing a pump that was approximately 5 feet long and weighed approximately 300 pounds. The employee's left ring fingertip was amputated when it was caught between the pinch point of the housing and the casting.",0
"An employee was operating a laundry press when the press fell on her hand from the up position. She suffered fourth degree burns on the left hand and a possible broken bone, requiring hospitalization.",1
"On or about March 1, 2016, an employee was cleaning the metal detector air valve when it actuated. The employee's hand was in the pinch point, and the middle fingertip was amputated.",1
"On 3/1/16, an employee was lifting a patient using a mechanical lift when the lift malfunctioned and struck the employee's back.",1
"An employee was pulling a cart filled with beverages onto the lift gate of a truck when his foot got tangled in the lift gate safety chains. He fell off the lift gate onto the concrete ground, suffering head trauma.",1
"An employee fell from a grocery stock cart to the floor while stocking a grocery aisle, injuring his head.",1
"An employee was surveying an area for future work while standing on an 8-foot A-frame ladder. He fell from the ladder, breaking his ribs and puncturing his lung.",1
An employee was walking towards the truck yard when he tripped on an uneven surface (1/4-inch rise). He broke several ribs and hit his chin.,1
An employee had an allergic reaction to air freshener in a patient's room.,1
"An employee was slicing meat in the deli for a customer when the employee's hand slipped off the guard and struck the rotating blade, amputating the right thumb tip.",0
A maintenance employee received multiple fractures and lacerations when a high-tension cable associated with a roll-up door wrapped around his right hand during attempts to troubleshoot a malfunction. He required surgery.,1
"An employee was working on a crane, fixing a hydraulic line. The employee fell from the crane to the concrete ground, suffering head injuries and a fractured clavicle.",1
"An employee was running the profile in a door panel shaper machine. When he attempted to clean out the sawdust, his left-hand pinky finger contacted and was amputated by the cutter on the machine.",1
"On Tuesday, March 1, 2016, at approximately 6:15 AM, employees were attempting to unjam the end-matcher machine. The load chain was placed in reverse, and a lug on the chain pulled an employee's right thumb into a guarded area, amputating the tip.",0
An employee was using his pass key to open the door when he hit his head on the mailbox and passed out.,1
"An employee was working in the stock area and was coming down the top-stock cart ladder when she missed the bottom step, falling backwards onto the floor and injuring her left wrist and lower back area. She was hospitalized overnight.",1
"An employee was reaching for a part to be welded with his right hand while his left hand was on an oil table that contained a conveyor. The conveyor cycled by itself, amputating his left middle and index fingertips.",0
"On 3/1/16, an employee was hospitalized after two fingers were crushed in the rollers of a machine.",1
An employee was hospitalized with a concussion after a lamp pole fixture hit him in the head during snow removal operations.,1
"An employee stepped onto an approximately 18-inch-tall retaining wall. The top cap block of the wall slid, causing the employee to fall and fracture his hip. He required surgery.",1
"An employee was working with a sewer jetter to clean a sewer line and the jetter became stuck. The employee attempted to remove it from the sewer line when the high-pressure dirty water shot into his right index finger, causing an infection.",1
"While an employee was performing electrical work underneath a refrigerated case, he noticed severe swelling in his left hand. He was hospitalized with an infection.",1
"An employee was repairing a leaking water pump. The employee went to change into rubber boots when he stepped on a wheel wire brush. The wires from the brush punctured and broke off in his right heel, requiring surgical removal.",1
"An employee was working early in the morning at a residential construction site, using a ladder to reach a gable to install corners finishing work. He stepped onto the icy roof, slipped, and fell approximately 10 to 12 feet to the ground, crushing/fracturing his vertebrae.",1
"An employee fell approximately 7 feet from an elevated picker while picking an order from the second level up. He landed between the mast and forks of a forklift, suffering bruising on his left side, a collapsed lung, brain bleeding, and facial injuries.",1
"An employee slipped on ice while walking to his truck, injuring his head.",1
"An employee was picking orders from ground level when a pallet fell from a shelf above and struck his leg, breaking his right fibula.",1
"An employee was stenciling a piece of 4"" 30' drill pipe inside a racking system. A second pipe was kicked over onto the racking system and rolled down the table, striking the employee from behind. This caused the employee's face to impact the stationary pipe in front of him that he was stenciling. He sustained a fractured jaw.",1
An employee was cleaning a machine when the machine cycled while his arm was inside. He suffered two fractures to his right arm.,1
"An employee fell to the ground while exiting a rental truck after missing the second step. During the fall, he struck his head on the truck and/or parking lot, suffering lacerations.",1
"While an employee was conducting a tree felling operation, the holding wood snapped and the tree came off the stump in the direction of the employee. The employee was following a designated escape route when the bole of the tree impacted his left side, breaking his rib, scapula, and clavicle; cutting his lip; and causing a chest contusion.",1
"An employee was working on a feed system and attempting to reline the feed line to the machine when her right middle finger was pinched by the homing plate, amputating her fingertip.",0
"An employee was assembling 5-pack boxes, cutting the plastic strapping from a bundle of cartons using a retractable snap blade utility knife, when his left wrist was lacerated.",1
"An employee was wearing a full harness, shock absorbing lanyard, rope, and anchor while working on the second floor roof. The employee slipped on a peel-and-stick felt pad and fell. He landed on his feet and fractured his right hip. He had 38 feet of rope laid out and the roof height was 23 feet.",1
"On Wednesday, March 2, 2016, at approximately 3:30 PM, an employee was operating a CNC machine. The employee opened the protective door of the machine to clean the chips from the fixture with an air hose. When his hand was close to the spindle area, the cutting tool struck his finger, amputating his fingertip.",0
An employee sustained electrical burns while performing wiring work.,1
An employee was attempting to remove a frozen chicken breast from a belt. The employee's fingertip was amputated when it was caught in the belt.,0
"An employee fell while walking down stairs. His finger was caught in a grate, ripping skin from his finger. His fingertip was surgically amputated.",0
"An employee was pushing a cart of plywood when a strong wind blew the plywood over, causing the cart to strike and fracture the employee's left ankle.",1
"An employee was working on an underground residential distribution junction box, attempting to ground a live elbow in a box, when an arc flash occurred. He received electrical flash burns to both legs.",1
"An employee was part of a crew performing work during the temporary shutdown of a boiler. He was raising a wash beam from inside the boiler by using an electric powered winch.  He was operating the pendant controls of the winch and raising the beam.  While raising the beam, his right hand was on the cable of the winch. The spool of the winch caught his glove, causing his hand to became caught in the winch.  He pulled his hand back, amputating his right ring fingertip just below the nailbed.",0
"An employee installing an ice and water shield slipped and fell 30 feet, breaking two ribs.",1
"An employee delivering mail to a residence misstepped from a step to the curb and fell, suffering head and back trauma.",1
"An employee fell through an opening on a permanent structure, a compressor, suffering a pelvic fracture.",1
An employee was struck on the head by a piece of concrete that fell from the ceiling. He suffered a concussion.,1
An employee was using a portable grinder on site when the grinder wheel shattered. The employee's right hand was lacerated by the wheel particles.,1
"On or about 3/2/16, an employee slipped and fell on concrete while exiting a car in the parking lot. The employee was hospitalized with a back injury.",1
"On or about 3/2/16, an employee was kneeling, writing an address on a shipping container, when a forklift ran over the employee's foot with the right front tire. The employee was hospitalized and the foot was amputated.",1
"An employee slipped inside the walk-in freezer, breaking the right hip.",1
An employee was on a step ladder removing decorations when she landed and felt pain in her right leg and knee.,1
"An employee was exiting a patient's room when her shoe was caught in the carpeting. She fell, striking her head twice on the floor. She suffered a concussion and was hospitalized.",1
An employee was injured after tripping over a fence.,1
An employee fell to the ground and injured his left wrist after being startled by a snake.,1
An employee was cleaning his boot with a high-power pressure washer when the washer lacerated the area above the right ankle.,1
"An employee was adjusting a surveillance camera. Afterwards, the employee began stepping down from the ladder he was using. He missed the last step of the ladder and fell to the floor, fracturing his left hip.",1
An employee removed a tire from a company trailer and was airing the tire when the tire exploded. The employee sustained multiple fractures to the left forearm and required surgery.,1
"An employee was loading I-beams when one of the I-beams fell off the rack and hit the employee in the back of the leg, breaking an ankle.",1
An employee's fingertip was amputated while stretching a cable.,0
An employee was walking and talking to another employee when she slipped and fell on the concrete ramp leading to her office building. She was hospitalized with a head injury and compound fracture to her right wrist area.,1
An employee was cleaning a coater (coats sheets of metal) with a rag when his right hand was caught and crushed between the rollers. The machine was running at the time of the incident.,1
"An employee was checking on a mini-excavator being worked on by a subcontractor. As he walked around the mini excavator, a hydraulic failure caused the extended boom to drop and strike the employee in the upper back area, cracking vertebrae.",1
"An employee was on security patrol and helped a driver enter the establishment. He then observed a trash can with a portion of a pallet sticking out of it. The employee attempted to push it farther down into the can. The piece was too long to move, and the employee had several wood splinters enter his hand. He was hospitalized when his injury became infected.",1
"An employee was preparing to help clean deli equipment using a chemical degreaser. The container  of concentrated degreasing chemical fell, causing the chemical to spill out and contact the employee's leg.  The employee suffered severe skin irritation.",1
An employee fell 12.5 feet from a stair landing to the ground and was hospitalized with multiple fractures.,1
An employee was trying to line up two pin holes when the pipes came together and amputated the first two left-hand fingertips.,0
An employee was walking down a flight of stairs when he tripped and fell down three stairs. He struck the handrail and suffered a contusion to the lower chest/upper abdomen on his right side.,1
"An employee was helping unravel hose when his hand was placed in the buffer zone between the trailer and hose. His right middle finger was caught between the hose and the trailer, resulting in the traumatic amputation of his fingertip.",0
"An employee's right hand was caught in the rollers while feeding dough into the dough machine, amputating the ring and middle fingertips.",0
"Employees were preparing to remove a gear box from a wind turbine when an employee's lower left leg was struck and lacerated by high-pressure hydraulic fluid, requiring hospitalization.",1
An employee slipped and fell in the parking lot and was hospitalized with a fractured femur.,1
An employee was cutting plastic pedestals using an electric miter saw when his left-hand thumb was amputated.,1
An employee hyperextended their back while picking up a 38-pound box and was hospitalized.,1
An employee was trying to replace a fiberglass grate when the grate slipped from his hands and fell on his right leg.,1
"While mixing concrete with a mixer drill, and employee's left index finger was caught in the blades, partially amputating the fingertip.",0
"An employee was clearing a jam on a powder-actuated tool when the tool discharged. The actuating piston struck the employee's right palm, requiring surgery.",1
"While two employees were walking and carrying a recliner, the employee who was walking backward tripped over a hand truck, became unstable, and fell, striking his head on the truck's lift gate. He suffered a head laceration that required surgery, as well as brain bleeding.",1
"An employee went to check wires on a pull box using a ladder. The employee contacted live wires, was shocked, and fell approximately 4 feet off the ladder. He landed on his back and hit his head on the ground, suffering bleeding on his brain.",1
An employee was waiting for maintenance to clear a jam on a tissue interfolder machine. The employee attempted to grab a scrap of paper as maintenance was jogging and stopping the machine. Her right pinky and ring fingers were pulled into a pinch point and had to be surgically amputated.,0
"An employee was operating a tree-trimming machine to cut tree limbs along a powerline when the machine rolled off a hill and struck a group of trees. He suffered a concussion, fractured arm, and broken ribs.",1
"At 5:45 AM on 3/3/16, an employee was walking into work from her car when she slipped on ice in the driveway and fell, fracturing her right ankle and knee.",1
"On March 3, 2016, at approximately 3:15 p.m., an employee fell 32 feet from a roof while installing metal panels. The employee suffered broken ribs and a broken pelvis, as well as a hand laceration.",1
"An employee placed a 500-1,000 lb. mold onto the sandblasting sled table using a crane. The employee then began moving the table to the sandblast cabinet when the tabletop fell from the base and landed on employee's left leg causing severe damage to his leg.",1
An employee was operating an auger and amputated the three middle fingers on the left hand.,0
"An employee was hospitalized after tripping and falling, resulting in a broken hip.",1
"A front end loader was pulling a truck out of the sand. The loader operator asked an employee to hold the chain used to pull the truck. The chain became tight and caught the employee's middle ring finger, fracturing it. The employee required surgery.",1
An employee was admitted to the hospital following a fire during the transfer of diesel fuel at a facility.,1
"An employee was hit/crushed by a motor grader's rear differential while the operator was backing up. The employee suffered a fractured back, three broken ribs, and a broken shoulder/collarbone.",1
"An employee was entering the building and was reaching for the closing door when his finger was caught between the door and door jam, causing a soft tissue amputation of his left-hand ring finger.",0
An employee was running pipe in a hole when his right pinky finger was caught and fractured between the wrench line and the rod.,1
"An employee was moving storage racks with a forklift when the forklift became stuck in the mud. The employee was putting boards under the tires with help from a coworker. The storage rack fell from the forklift and struck the employee. He sustained a crushed pelvis, broken ankle, broken ribs, and a head injury.",1
"During the cleaning and sanitation of a dough divider, an employee was checking to see if any food particles were left on the machine. He spotted a small piece of bread dough and tried to flick it off with his finger. The tip of his glove was pinched in the machine, which amputated his right middle fingertip.",0
An employee was feeding stock into an alligator shear when the shear amputated the employee's middle finger.,1
"An employee was checking one of the label-making machines in the cooler. When she bent down, she lost her balance and grabbed a step ladder. The ladder folded and crushed her left pinky finger.",0
"An employee cleaning a conveyor line came into contact with a chain and sprocket, amputating a fingertip.",0
An employee's knee was pinned and injured between two carts.,1
"An employee was trying to clear a blocked floor drain using an air hose. He attempted to pressurize the drain and hot water splashed onto his face, arms, and chest, causing second degree burns to 10 percent of his body.",1
An employee's left little fingertip was pinched by a carry aid that opened as it was being unloaded from a truck. The fingertip was surgically amputated.,1
"An employee was shuttling vehicles at the distribution center.  The employee fell and struck their head while entering or exiting a vehicle, suffering a traumatic brain injury.",1
"An employee was moving furniture when a leg broke on a china cabinet. The cabinet hit her in the head, back, and leg, causing contusions.",1
"Three workers were raising the structural wall frame of a single family house when the wall fell onto an employee, fracturing his upper leg.",1
Two employees were operating forklifts when they collided with each other. One of the employees suffered a fractured left tibia.,1
"An employee was trying to unjam a jammed pipe connection when the cast-iron T section of the boiler pipe shattered, causing steam and hot water to release and burn the employee's thighs. The employee suffered second degree burns.",1
"An employee was using a dismantler to pull the boards of a pallet apart. His hand became caught in the pallet, and he was unable to remove his hand before the pallet went through the blade of the dismantler. His pinky fingertip was amputated.",0
"An employee was attempting to dismount a railcar by the side ladder when the railcar began to move along the tracks. The railcar collided with a pipe layer on an A-frame, crushing the employee's right hand between the pipe layer and the ladder of the railcar. The employee was hospitalized and required hand surgery.",1
"An employee was climbing up a fixed ladder to clear a material jam on a conveyor when his hand slipped, causing him to lose balance and fall from the third rung up from the floor. He fell standing up, but fractured his lower left leg.",1
"When an employee stepped onto bleachers, the bleachers broke, and the employee fell through and hit the ground. The employee suffered 13 fractured ribs, a punctured/collapsed lung, a dislocated shoulder, and multiple contusions and abrasions.",1
An employee was replacing a bearing in a space heater when his leather glove was caught at the edge of the separator bar (the rotating mechanism inside of the heater) as it turned. His right thumb was caught between the separator bar and the outer shroud (the heater's fan with a filtration system) and was amputated from the first joint.,0
An employee was inspecting metal stripes in the attic of a dormitory construction. The employee stepped on a soffit and fell through a hole approximately 9 ft. off the ground breaking the tibia and vertebrae.,1
An employee was punched in the face by a shoplifter and suffered facial fractures that required surgery.,1
"An employee was adjusting the location of a barrier on a work site when the barrier fell on his foot, fracturing some bones.",1
An employee was tapping a part on a milling machine when his glove became caught on the rotating tap. His left thumb was partially amputated under his fingernail.,0
An employee fell from a ladder and fractured three vertebrae while installing home TV cable.,1
An employee was taping metal coil when coil came off a C-hook and hit the employee's right side. The employee suffered a hairline fracture to the pelvis and vertebrae.,1
"An employee was hanging 8x8 tubes from the ground level. The first tube was set in place and the second tube was being placed. The column leaned out and separated from the wall, causing the tube to slip off the column. The steel tube hit the employee's forehead and knocked the employee against a wall.",1
An employee was finishing drywall seams on the fourth floor corridor ceiling when he fell to the concrete below. He suffered a right-side facial laceration and broken right arm.,1
"An employee was feeding a piece of 1/4""-thick by 2""-wide by 2'-long steel flat bar into an electric plate rolling machine. The employee noticed that the material was feeding crooked. When he tried to straighten it, his right hand was pulled into the rolling mechanism, crushing the index and middle fingers between the rollers. He used his left hand to push the roll-release lever, which freed his right hand from the machine.",1
An employee was walking to her automobile to travel to her next assignment when she fell off a curb at the site and fractured her arm in four locations. She was hospitalized.,1
An employee's finger became caught between two metal doors while he was trying to close them. His left index finger was amputated at the second digit.,0
An employee was cutting in wall blocking and amputated a finger with the saw.,0
"While coaching and training a cart associate, an employee tripped over a speed bump outside the store and fell on her left arm, fracturing it and requiring hospitalization.",1
"An employee was bending flat steel into machine parts on a brake press. On the third bend, the steel curled around, catching and crushing the employee's right thumb between the steel and the brake press.",1
"On March 5, 2016, at approximately 1600, an employee was placing rope between stacked pipe to protect the finish on the product when the line ejected another pipe. The ejected pipe came over the stop and struck the employee, pinning him between the pipes and causing crushing injuries to his legs. He was hospitalized.",1
"An employee's left hand was caught between a pontoon and a rigging chain, amputating the left-hand index finger at the first digit.",0
"An employee was working off an extension ladder when the bottom of the ladder slipped and the employee fell off, landing on his feet and injuring his back.",1
"While an employee was unloading a trailer of media cabinets, product fell on him and broke his lower right leg.",1
"An employee and coworkers were setting up the small mortar mixer on a concrete masonry unit to allow the mortar to be poured into a wheelbarrow. As he was lifting the mixer, it moved forward, causing him to lose his grip. It slipped out of his hand and pinched his fingers between the top of the concrete masonry unit and the bottom of the back of the mixer, amputating his right index fingertip.",0
"While skiing down hill, an employee was hit on the head and knocked unconscious by a bar/cross bar of the ski lift, sustaining a head injury.",1
Two forklifts collided in a warehousing operation. One employee was injured by the fork of the other forklift truck.,1
"An employee's left middle finger was pinched between decking support, requiring hospitalization for surgery.",1
An employee was loading metal stock into a CNC machine when his right thumb struck against the machine and was lacerated. He was hospitalized when the laceration became infected.,1
An employee's fingertip was amputated while working on the printing press. The machine was running at the time of the incident.,0
An employee suffered a broken right hip and was hospitalized.,1
"An employee was attempting to reach and adjust a chain that was holding up one of the very large bags in the baghouse. The employee crawled on top of the bags, which are held in place by angle irons 11 inches apart. While crawling toward the bag, the employee lost his grip and fell through the 11-inch gap. He fell 37 feet to the ground, breaking a foot and fracturing a vertebra.",1
"An employee was taking a box from a shelf in the bakery cooler when she lost her balance, fell, and hit her head on the floor. She was hospitalized.",1
"A crane operator was moving a load, which was secured by choker slings. An employee on the ground was struck in the head by the pole/rod while the lift was taking place, fracturing his skull.",1
"An employee was operating a boring mill and measuring a hole that was to be drilled in a cross beam when their sleeve was caught in the drill bit. The force from the boring machine caused the employee to flip over and land on the ground, suffering cracked right ribs, a collapsed right lung, right kidney bleeding, and a rash burn to the arms and neck.",1
"A forklift driver was re-positioning a pallet when the pallet fell off the forks, striking and breaking a nearby employee's right leg.",1
"An employee was changing grease fittings and lines on a stand in the plant. The employee was picking up the hoses as he was walking away (there is a channel that the profile gauge moves back and forth over). The profile gauge had been moved away at the time, uncovering the channel. The employee stepped in the open channel, which is 26"" deep, and broke his left leg.",1
An employee was taking out the garbage when wind caught the door and closed it on the employee's finger. The employee's left index fingertip was amputated.,0
"On March 6, at approximately 2:30 p.m., an employee climbed up a ladder to inspect a roof. The ladder slid sideways, and the employee fell 10 feet to the driveway. The employee sustained a fractured left elbow and was hospitalized.",1
"An employee was moving a steel plate with a gantry crane when his thumb became pinned between the plate and the frame of the crane, amputating his thumb tip.",0
"An employee was helping to stack barge covers when the top cover's clamp became caught in the D-ring on the cover below it, preventing proper stacking. The employee went to assist another employee in removing the catch and asked the crane operator to lift the top cover again. During this action, his left index finger was caught in the clamp, lacerating it. He required surgery.",1
"An employee fell from a stepladder to the ground while trying to grab an item off a shelf, injuring his elbow, back, and head.",1
An employee was playing basketball with clients as part of a health and wellness activity when he ruptured his left knee.,1
"An employee was framing a residence when he fell off a scaffold to the ground, breaking his ribs and requiring hospitalization.",1
An employee backed into a shelf while driving a stand-up forklift and suffered a back injury.,1
An employee sustained a partial amputation of the small finger while operating a drill press.,1
"An employee was diagnosing an issue with malfunctioning ejector plates and was attempting to remove a plastic particle from behind a back plate when a second employee cycled the machine. The plates closed and pinched the first employee's hand, amputating the right middle fingertip.",0
"On 3/7/16, an employee using the mobile vet clinic was hospitalized with an infection after being bitten by a cat.",1
"An employee was using a 6-foot step platform ladder to change a filter for a pump when the platform ladder became unstable and tipped over to the ground. The employee fell and suffered fractures to the right wrist, right ankle, and right hip.",1
"At approximately 10:20 p.m., an employee was operating one of the moving lifts. When he exited the lift, the vehicle did not stop, and his foot was smashed between the machine and the protective railing, severing his toe.",0
An employee was exposed to carbon monoxide from two forklifts while working at the grading table.,1
"An employee tripped and fell while carrying material. The employee fractured the right wrist and injured the right knee, requiring wrist surgery.",1
"An employee was moving a part with a forklift when he struck a storage rack. A brake drum fell from the storage rack and struck his right ankle, breaking it. He was hospitalized.",1
"An employee was operating a mixer when the bowl fell from the guard. The employee's finger was caught in the mixer, amputating his left middle fingertip.",0
"An employee was making an inside delivery and was cutting a strap with a box cutter. The strap was resistant to the box cutter, so he pulled with more force. The blade came past the box and cut his inside wrist and forearm area, severing a blood vessel. He was hospitalized.",1
An employee was using a router to cut a groove in a panel when his index finger went into the opening on the router. The bit pulled his glove in and his right index finger was amputated.,0
An employee was installing an LV box overhead while standing 4 feet up on a 6-foot ladder when she fell off the ladder and fractured her ribs.,1
An employee was operating a pallet jack to move material when the employee's foot was caught between two pallet jacks. The employee sustained crushing injuries and broken bones to the foot and ankle.,1
An employee fell approximately 4 feet from a trailer to the ground while pulling a skid with a drum on it when the skid broke. The employee suffered a broken right wrist.,1
An employee was installing lift straps when he slipped and his hand entered the bearing point of a mill and bearing roll. His left thumb broke.,1
"An employee was repairing a roof when he fell approximately 30 feet to the ground, puncturing his lung.",1
An employee was installing a light fixture from a ladder when he made contact with a live electrical wire. He fell from the ladder and fractured his clavicle.,1
An employee was performing maintenance on a blowout preventer when his finger was crushed by a hydraulic valve. He was hospitalized and had surgery for fractured bones in the left ring phalanges.,1
"An employee was helping to move a pane of glass when it fell on him and shattered, causing lacerations and fracturing bones.",1
"An employee was walking out of the guard shack when he slipped and fell to the ground, breaking his left leg in two places.",1
"An employee was changing out a hydraulic line from a piston-holding, hoist-on roll-off when it fell, injuring the employee who required hospitalization.",1
"An employee was pushing a cart of chrome bundles, which were 2"" x 12' long. The bundles shifted and pinched two fingers on his right hand. When he pulled his hand out, his fingertips were amputated.",0
"An employee descending a 28-foot extension ladder misstepped and fell approximately 9 feet to the ground, breaking an ankle.",1
"An employee was working from a 4-foot A-frame ladder when the soffit on which he was working de-stabilized and fell, knocking the ladder and employee to the ground. He broke four ribs and suffered a partially collapsed left lung.",1
An employee amputated his left-hand ring and middle fingertips when his hand contacted a running fan belt.,0
"Two employees were operating a manual, foot-operated shear to cut aluminum sheet metal. The injured employee was helping to hold down the sheet metal when the second employee operated the shear, amputating the injured employee's right index and middle fingertips.",0
"While cutting wood with a table saw, an employee contacted the moving saw blade, amputating half of the left middle finger.",0
An employee was changing a light bulb when the bulb burst in his hand. The broken glass lacerated this palm.,1
"While replacing roof sheet metal, an employee fell approximately 26 feet from the roof, to the top of a forklift, and then to the concrete ground, suffering a broken leg.",1
An employee's right-hand pinky fingertip was amputated when an equipment facer fell.,0
"An employee was attempting to move a box of labels, which weighed approximately 42 pounds.  The box was located on a pallet on a lower shelf of a warehouse rack system. The employee lifted one box and placed it on an adjacent pallet. When he stood up and turned to get another box, he lost strength in his legs and fell to his knees. He was hospitalized with a back injury.",1
An employee was operating a cold press and amputated the right index finger from the second knuckle.,0
"An employee was cleaning up the area when he noticed a piece of meat on the frame of an overhead saw (tail cutter). The employee reached up to get the meat but contacted the blade instead, amputating his left index fingertip.",0
The injured employee and a coworker were picking up supplies from a local supplier in a truck. The dock plate at the local supplier did not engage properly. Both workers got out and were trying to fix the dock plate when it came down on and amputated the injured employee's right index fingertip.,0
"On March 7, 2016, an employee was moving a motor weighing approximately 350 pounds when the motor broke the floor, creating a hole. The employee fell approximately 25 feet through the hole, dislocating the left shoulder, fracturing an elbow, breaking a hip, and possibly rupturing the kidney and spleen.",1
An employee was cutting pieces of copper using a shear when one of the pieces dropped. He reached down to get the piece with his right hand and at the same time his left foot pressed the down pedal of the shear (which has an up pedal and a down pedal). His left-hand index and middle fingertips were amputated above the top knuckles.,0
"An employee was injured after they climbed on top of a forklift and inadvertently kicked it into gear. The employee became pinned between the roll bar and the mast, suffering a cracked sternum.",1
"On 3/8/2016, an employee was folding a box when she sustained a paper cut on her left wrist. The cut later became infected and required hospitalization.",1
"An employee was attempting to split a chicken with a saw. As the employee was pushing the chicken onto the saw blade, the employee's left index finger touched the saw blade, amputating the tip.",0
An employee's left thumb was amputated while the employee was fixing the railing of a flatbed truck.,1
"An employee was pulling a nail with a pair of 6"" channel lock pliers when the nail broke and released from the pliers. A nail fragment went under the employee's safety glasses and punctured the globe of the employee's left eye.",1
An employee was unloading tote pallets from his delivery truck with a ride on electric pallet jack. The pallet jack struck a fixed light pole and the employee fell off the pallet jack onto the floor resulting in a right hip fracture.,1
"An employee's hand was caught in a chain drive while the employee attempted to clear a jam, amputating the pinky finger.",0
"On 3/8/2016, at approximately 2:00 PM, an employee was cutting up boxes. As the employee was attempting to step over the boxes, she tripped, fell, and hit her head. She lost consciousness and suffered a concussion, requiring hospitalization.",1
An employee was holding a railroad crossing gate for a vehicle to get on the railroad. The vehicle struck the gate and the gate fell on his finger. His left ring finger was lacerated and the fingertip was eventually amputated.,0
"Two employees got on a jet ski to rescue a guest that had capsized. During the rescue operation, a wave capsized the jet ski and caused it to break down. One of the employees suffered hypothermia after being immersed in the 55-degree water for several hours.",1
An employee was clearing a jam from the snap ring press when he received a cut on his right forearm.,1
"An employee was carrying multiple containers of baby formula with both hands. She was going behind the service desk when she tripped over a box that was on the floor behind the desk. She fell and fractured her left knee, requiring hospitalization.",1
"At approximately 09:00 a.m., an employee entered the attic area of the building to look for extra ceiling panels. He was making his way through the attic when he came across a surface that appeared to be concrete (this was actually the backside of the sheetrock that served as a ceiling to the area below). When he placed his foot on the surface, the sheetrock collapsed, and he fell from the 18-foot ceiling to the concrete below. He struck an automotive training aid tire with his left wrist as he fell on his back. He fractured his back, requiring surgery, and bruised his wrist.",1
"An employee was cleaning wet sand from the sand bin gate when the gate closed on his left hand, causing multiple fractures and lacerations. He required sutures.",1
"An employee was operating a winch on a barge when the rigging came free and hit the protective cage, breaking the cage loose. The cage hit the employee, lacerating his forehead and causing multiple facial fractures. The was hospitalized.",1
"An employee's hand came into contact with an engine fan blade, amputating his right index finger and lacerating other fingers.",1
"An employee was removing a contaminated piece of meat from a hanging bovine carcass using a trimming knife. The employee was stabbed with their own trimming knife when a piece of fat fell on their cutting arm, pushing the arm into the stomach/abdomen.",1
"An employee was dismounting a 6-foot step ladder when he slipped and fell. As he fell, his right arm struck a nearby machine and fractured.",1
The employee was picking up hand tools and materials from around a drilling rig when he was struck in the head by a falling drilling rod and knocked unconscious. He suffered a head and neck vertebra injury.,1
"On Tuesday, March 8, 2016, at approximately 7:15 AM, an employee was wrapping the walls of a modular home for shipping. The wall fell and injured the employee when he tried to grab it to stop it from falling. He was hospitalized overnight for treatment of back injuries.",1
"An employee was using an aerial lift to trim trees. The foundation under the outriggers was soft/wet and could not support the weight of the lift in the extended position, causing the lift to tip over. The employee fell 30 to 45 feet from the lift and fractured the hip.",1
"An employee was working on a pole while standing on a ladder when he fell to the ground, injuring his ankle. He was hospitalized.",1
An employee's finger was smashed in a car door in the parking lot. His fingertip was amputated.,0
"An employee was in a free-swivel utility bucket installing the primary and neutral lines on a pole. The bucket moved, and the employee's left-hand middle finger was crushed and punctured by the parking bracket.",1
"Workers were removing a load of rebar from the jobsite with a rough terrain forklift when the load of rebar shifted. An employee on the ground was struck by the falling load and ended up falling onto cribbing, fracturing the right ring finger, left pelvis, and tailbone. The employee was hospitalized.",1
"On March 8, 2016, at 10:00 AM, two employees were working on the first level of the chemical vaporation area when a crane operator on the second level lowered the ring to lift a load. A 50-pound safety ring  dislodged from the lifting ring from about 7 feet, striking one employee in the hard hat and another one in the back. The employee who was hit in the back was hospitalized with three broken ribs and a hematoma.",1
"An employee was doing a wheel alignment. He stepped out of the vehicle, fell to the ground, and lost consciousness.",1
"A vehicle battery on a drill press became unsecured while an employee was drilling into it. A battery cable wrapped around the employee's left ring finger, amputating it at the first knuckle.",1
"An employee was using a pressure washer to clean a forklift. The pressure washer lost pressure, so the employee walked around the pressure washer to try and see what was wrong. At that time, the ""caps"" blew off of the heater element on the pressure washer, striking the employee in the jaw and fracturing it.",1
An employee was moving a spreader bar into position when it slipped and caught his thumb between the bar and the wall. He was hospitalized to have his thumb reattached.,1
"An employee was moving carts out of the way to connect a bag cart to a tug. One of the carts hit a seam in the concrete, and the cart's tong arm swung around and hit the employee's arm, fracturing it.",1
"An employee was raising a roll of paper up with a hoist so that they could turn the roll of paper to the right position on the ramp. While working on the raised roll of paper, two or three other rolls of paper were prevented from coming down the ramp by an air activated cushion and a rubber chock.  Somehow, the rolls of paper became free and started rolling down the ramp. One of the rolls of paper struck the employee and pushed him against the roll of paper he was working on fracturing his pelvis.",1
"On or about March 9, 2016, an employee was working with an internal combustion machine in the basement of a new construction residential house when he collapsed. The employee was overexposed to carbon monoxide and hospitalized.",1
"An employee was descending the fold down access ladder on the concrete mixer truck after spraying down the hopper. The employee's wedding ring, worn on left ring finger, was caught on a bolt associated with the ladder safety latch, located on the left side of ladder. The injured finger required medical amputation.",0
"An employee was loading paper into a printing press when the press did not move the paper along as designed. The employee jogged the machine and turned it off and then on, attempting to get the paper to move along. The employee's left index finger was caught in the machine, amputating the first digit of the finger.",1
"An employee was installing roofing materials when he lost his footing, tripped, and fell onto an asphalt buggy. He was hospitalized with burns to his arm.",1
"An employee was removing a tree limb with a chainsaw when the chainsaw kicked up and cut his left arm, requiring surgery",1
"An employee's left foot was caught between the forklift he was operating and a pole, requiring surgery.",1
"On March 9, 2016, around 2:00 p.m., an employee slipped and fell on grease in the kitchen, breaking her left wrist. She was hospitalized.",1
"An employee was using a riveting machine to rivet a part. As she was removing the part, it became caught on the riveting detail for the pneumatic device. Her finger was then caught in the point of operation when the machine was activated by the foot pedal, partially amputating her right thumb.",0
"On 3/9/16, at approximately 5:15 PM, an employee in the back of the shop was injured after falling from an unknown height. He was hospitalized overnight for treatment of his injuries.",1
"While grinding on a disc sander, an employee's finger became lodged between the platform and the sander, amputating the distal tip of his right thumb.",0
"An employee engaged in wood-framing activities fell 13 feet to the ground, suffering multiple fractures. The employee was wearing fall protection at the time.",1
"While driving to a patient's house during a storm, an employee exited their car and was swept away by rushing creek water. The employee suffered hypothermia from the cold water.",1
"An employee was operating a riding pallet jack when she fell and hit her head on the concrete warehouse floor, suffering a concussion.",1
"Employees were unplugging a slurry strainer that was plugged with corn mash. They shut the slurry strainer down and took it offline to be cleaned and unplugged. When the machine was cleaned and put back online, a drain valve was not closed. Pressure forced the hose/pipes into the air, spraying hot liquid onto the employees. One of the employees suffered second degree burns on his neck, ears, and back, requiring hospitalization. The second employee suffered first degree burns on his cheek and ears, but was not hospitalized.",1
"Employees were putting a new tire on a loader/forklift. Two employees were using pry bars to manipulate the split rim in order to get the tire to seal correctly around the rim. The injured employee was manipulating the spare tire. One of the pry bars slipped while the injured employee was positioning the tire, amputating his right ring fingertip.",0
"An employee was on the production floor moving a hot glue cart when the cart began to fall. The employee tried to stop the cart and glue pot from falling, but he fell with it and his hand contacted the melted glue. He suffered third degree burns to his hand.",1
"An employee was removing a spacer from the curing press when a bolt that was holding up the support leg for another piece of equipment (platen) broke. The support leg fell on the employee's right middle finger, smashing it.",1
"While restarting a compressor, an employee noticed the alternator belt was loose. The employee was tightening a bolt when an arc occurred, igniting natural gas vapors in the area and burning the employee's hands and face.",1
"An employee was guiding a metal grating, which was being lifted by an excavator bucket to its final location, when the rigging slipped from the excavator hook. The metal grating then fell, striking the employee in the left leg just below the knee. The impact fractured the employee's tibia and fibula, requiring surgery.",1
"An employee was pulling a pallet of water when she stopped on a ramp with the pallet. The pallet continued to move and rolled onto her leg, fracturing her left foot.",1
An employee was shot in the ankle while bagging groceries.,1
"On 3/9/16 at 9:30am an employee had serviced the planer, removed his lock, and started the machine.  He observed a piece of wood near the point of operation and reached towards the planer blades to remove the wood and his fingers contacted the rotating planer blades resulting in amputation of part of the right-hand index and middle fingers.",0
An employee's thumb was partially amputated while performing maintenance on  a primary machine. Four of the employee's fingers were caught in a belt and pulley.,1
An employee was headed to the lab extruder to run a sample. She was found laying on her back and bleeding. She was hospitalized with a head injury.,1
An employee went into the shed to get a pitching machine when he severely cut his left calf on the sharp edge of a motorized cart. He was hospitalized.,1
An employee fell to the ground from an extension ladder that was 5-feet high when the ladder kicked out from under him. He broke his right foot.,1
"An employee was installing an LED light fixture in the light circuit when he was shocked. He suffered burns to his left and right hands, broken ribs, a head laceration, and a possible fractured rib. The light circuit was not locked out and personal protection equipment was not worn at the time of the incident.",1
"An employee was working from a mid-stand ladder that was hooked to a cable when the cable broke. The employee fell to the ground and suffered lower vertebrae fractures, requiring hospitalization.",1
An employee fueling a truck tripped and fell while walking over the elevated fuel hose. The employee was hospitalized with a broken left foot.,1
"An employee was removing rigging grabbers/biters for a wall panel when his finger was grabbed by the equipment, causing a finger injury.",1
"While delivering mail, an employee was chased by two dogs. The employee fell on concrete and received a severe arm fracture.",1
An employee was placing a piece of waste wood in the compactor and caught a wrist between the wood and the side of the compactor breaking it.,1
"On 3/9/16, at 8:06 p.m., an employee injured his right hand while breaking up a fight between inmates. The employee's hand became caught in an inmate's mouth during the altercation.",1
"An employee was reassembling a bagger head when a metal piece came too close to a metal detector and caused the machine to deactivate. The deactivation caused a valve to close on the employee's left thumb, partially amputating it.",0
"An employee was driving a golf cart that was struck by another vehicle. The employee was thrown from the golf cart over the other vehicle, suffering a head contusion.",1
"Two employees were removing a 4' x 3' part from the welding jig with an overhead hoist.  The part got stuck, then broke loose, and dropped on the employee's right pinky finger. The finger was amputated at first knuckle.",0
"On March 10, 2016, an employee was walking behind a lift truck when the vehicle rolled backward and struck the employee. The employee suffered a fractured hip.",1
"An employee and coworkers were removing rigging from a steel I-beam. As they were freeing the straps from under the load, one of the straps became caught under the beam. The upward force of the strap caused the beam to tip over, pinning the injured employee's foot underneath it. He was hospitalized with a broken right ankle.",1
"An employee was helping his foreman crank an electrical generator. The generator's pull starter started whipping around and broke off from the motor's plastic cover. As he tried to turn off the kill switch, the pull starter wrapped around his left thumb and amputated it. He was wearing leather gloves at the time of the incident.",0
"On March 10, 2016, at approximately 12:00 p.m., an employee was injured after dropping a wooden board, weighing up to 50 pounds, on his left foot. He was hospitalized when his injury became infected.",1
"An employee was unloading a truck/trailer when the employee fell to the pavement, fracturing the lower left leg and requiring hospitalization.",1
An employee was climbing down a ladder inside a home when his right ear hit a shelf on the wall and started bleeding. He was hospitalized.,1
"An employee was herding cattle from the pens to the kill floor. On the way to the kill floor, the employee tripped and struck his head on the concrete of the pens. As the cattle passed him, one of their hoofs struck him in the ribs. He was hospitalized with broken ribs, a concussion, a broken nose, and a head laceration.",1
"An employee was gathering tree limbs from the ground and feeding them into a chipper. While he was feeding the chipper, a piece of rope was caught in the feeder wheels and wrapped around his right hand, amputating his fingers.",1
"The employee was attempting to push a lawn mower housing into the press area, while pushing a newly pressed lawn mower housing out onto a conveyor. A lift rack that is on a timer rises up to catch the lawn mower housing that has just been pressed.  The employee's left thumb was caught in the rack as it retracted resulting in a crushing injury/amputation to the thumb tip.",0
An employee climbed a ladder leaning against an energized distribution breaker when a phase-to-phase or phase-to-ground flash occurred while the employee was holding two testing clamps. The employee experienced an electrical burn and was hospitalized.,1
"An employee was working with hot aluminum sulfate. During the reaction portion of the aluminum sulfate process, the agitator was turned on, causing the aluminum to boil too fast and crack the lid over the sulfate. The hot aluminum sulfate spilled onto the employee, causing second degree burns to the foot and the back of the right arm.",1
"An employee dropped an Allen wrench into a molder machine. When he attempted to retrieve the tool, his hand was caught on one of the gears. His right hand was pulled between the gear and the machine, damaging his right thumb and his middle and index fingers. The machine was still running at the time of the incident.",1
An employee's right hand fingers were caught in the chain and sprocket. The ring finger was lacerated and the middle finger was broken.,0
"An employee was training a horse with a long line. The horse became spooked, and one of the lines pulled forward and caught the employee's foot, throwing her up in the air and breaking her right hip.",1
"On 3/10/16, at 6:15 a.m., an employee went up a ladder to unlock a hatch and access the roof for work. He unlocked and opened the hatch, saw that the ladder was not extended 3 feet above, and went back down to readjust it. He lost his footing and fell 8 to 10 feet, breaking his left leg and right heel. He was hospitalized.",1
"An employee was helping a coworker move a catwalk away from a piece of equipment for cleaning purposes. The employee's hands were beneath the catwalk to guide the forks of the forklift under the catwalk when the fork caught his right index finger, partially amputating the tip. He was hospitalized for surgery.",0
An employee was pinched between a trailer truck and a 40-yard dumpster after the trailer rolled from where it was parked.  He suffered a right thigh laceration and a right shoulder strain.,1
An employee was walking down stairs and fell down several risers after reaching the second step. The employee suffered a sprained ankle.,1
"The employee was transferring a cardiac patient from his bed onto his wheelchair. As she was transferring him, he made sudden moves, which caused her to do the same. She suffered a hernia in her abdomen and required surgery.",1
An employee's thumb was pinched when a crimp tool actuated. The accident resulted in the amputation of the employee's thumb tip.,1
"An employee was operating a powered industrial truck (PIT) to move product through the shipping area. The employee's PIT collided with another PIT, and the employee suffered a lacerated and fractured left foot, requiring hospitalization.",0
"A work van and trailer pulled off of the road shoulder to begin working. As workers were removing safety gear and equipment, a northbound vehicle came off the road, beyond the shoulder, and struck the trailer, pushing it into the rear of the van. An employee retrieving equipment at the back of the van was pinned between the trailer and van, suffering a broken right leg and left hand.",1
"An employee was using a straight ladder to clean a horizontal coater. The employee slipped while descending the ladder, falling 6 to 8 feet to the cement floor and fracturing a leg. The employee was hospitalized.",1
"An employee was operating a straddle carrier when a crane's spreader bar struck the carrier during ship loading operations. The employee was ejected and fell approximately 25 feet, landing on top of a container. The employee suffered a broken right femur that had to be surgically amputated.",1
An employee was removing sweet potatoes from the oven and received a burn on the right upper arm from spattering grease. The burn became infected and the employee was admitted to the hospital.,1
"An employee was placing mechanical insulation on a storm drain pipe when the employee fell from a 10-foot fiberglass step ladder to the concrete floor. The employee suffered a fractured left hip socket, concussion, and head laceration.",1
An employee was hospitalized after sustaining back injuries while lifting a 10-foot ladder.,1
"On March 11, 2016, an employee was changing a lighting ballast on an overhead light when the employee made contact with a fuse holder joining the open electrical circuit. The employee was shocked and fell from the ladder, injuring the right side of the body, the thumb, and a finger. The employee was hospitalized.",1
An employee fell 12 to 15 feet after his scissor lift was knocked over by falling duct work. He suffered a back injury from hitting the ground.,1
"On or about March 11, 2016, an employee was working on a robot gripper when the gripper activated, pinching and partially amputating his left index finger.",0
"On March 11, 2016, an employee was hospitalized after being attacked and bitten on the face by a dog while delivering and/or picking up packages at a residential home.",1
"An employee was operating a reach forklift truck when he struck a steel column while turning. His left foot was pinned between the reach truck and the steel column, and he fractured his lower left leg.",1
"On Friday, March 12, 2016, at midnight, an employee slipped and fell on the wet processing floor by the washing area, suffering a fractured hip.",1
"While performing a troubleshooting task on a folding ladder, an employee braced one foot on the kettle lid. The lid slipped off and fell inside the kettle, which was full of 250-degree melted flakes, causing the employee's leg to fall inside the hot solution. The employee suffered second degree burns to the left foot and lower leg.",1
"On 3/11/2016, at 09:30, an employee was performing a property claim adjustment on a one-story residential home roof. As the employee was exiting the roof, she fell from a ladder to the deck below. She was hospitalized with three broken ribs on the right side.",1
"An employee was standing on the lift gate of a truck, unloading a junk pool heater into a dumpster, when he lost his balance and fell to the concrete below. He suffered head trauma due to head contact with the asphalt.",1
"An employee was working with a brake press, pushing a 1-foot by 5-foot piece of metal up under the hold-down dogs, when the machine cycled. The employee's left index finger was crushed and amputated by the hold-down dogs.",0
"An employee was on top of a running machine, cleaning it with a hose, when his left arm became caught between the wall of the machine and the machine's auger. He suffered bruising to his left arm.",1
"An employee was jogging a packaging machine and feeding film through it when his hand contacted the cutter, amputating his fingertip.",0
"An employee was mounting a tire onto a rim. While setting the tire bead, the bead broke, and the tire and rim were ejected from the machine. The employee was struck by the tire and rim, suffering blunt force trauma to the head.",1
"An employee was carrying a tray of dirty dishes when she slipped and fell backward, fracturing her left hip.",1
An employee was repairing an overhead light in the emergency room when the cover collapsed on his right thumb. The cover cut through the employee's glove and amputated his right thumb tip.,0
"On March 12, 2016, an employee fell from the third step of a 6-foot fiberglass step ladder when his boot became hung up. He broke his left hip and required surgery.",1
"An employee was attempting to align the conveyor belt when his right thumb was caught between the rollers, amputating the thumb below the fingernail. The belt was in motion at the time of the incident.",0
An employee was running a crimper on the 40 mm line when her right thumb and index finger were crushed by the machine. Her thumb and index finger were surgically amputated.,0
"An employee was slicing meat using a band saw when the movable platform on which the meat was placed stalled.  With his right hand on top of the meat, the employee used his right side hip to apply more force on the moving platform to push the meat toward the operating band saw. He was wearing cotton gloves at the time of the incident. The right-hand cotton glove became caught between the meat and the band saw, which consequently dragged his right ring finger toward the point of operation. His finger was amputated.",0
"An employee was moving a pallet with a pallet jack when he fell from the platform of the semi-trailer he was unloading. He fell head-first to the ground, suffering a head injury.",1
"On or about March 12, 2016, at approximately 2:00 AM, an employee was working on the assembly line, attempting to stow a steering hose, when her hand was caught between machine components. Her ring finger was amputated at the distal tip, requiring hospitalization.",1
"An employee was installing cable when a piece of the metal strains went into his finger. His finger became swollen, and he was hospitalized with an infection.",1
An employee was closing the tailgate to a pickup truck when his left pinky finger was caught and crushed between the tailgate and the bed of the truck.,1
"While performing a maintenance task on a mold tilting device, an employee's hand was caught in the device, causing muscle damage that required surgery.",1
"An employee was changing a battery and removed the battery plate. As the employee was replacing the plate, it became stuck. The employee tried to unjam the plate; in the process, the plate fell on the left middle finger, amputating the tip.",0
An employee fractured her hip after tripping over a pedestal fan cord.,1
An employee fell and broke her hip while walking to her car in the parking lot.,1
"An employee was loading baggage into a tractor's passenger side when the tractor operator began to drive and ran over the employee's foot, injuring her right ankle.",1
"On March 13, 2016, an employee was putting a belt (48"" wide by 17' long) on the screener.  The employee was on a ladder three rungs up. When he attempted to pull on the belt, the ladder went out from underneath him and he fell to the floor. He suffered a compression fracture to his lumbar vertebra.",1
"An employee was attempting to fix a registration issue on a machine's fill and seal line. As he went to remove a cover off the stretch cylinder, the machine cycled. His left middle finger was crushed between the machine's collar and the stretching cylinder, amputating his left middle fingertip.",0
An employee was operating a reach truck to move freight through the aisles when his foot became pinned between a rack and the truck. He was hospitalized with a foot injury.,1
An employee was cutting meat with a vertical band saw when he cut his middle finger.,0
"On or about March 13, 2016, an employee's leg was crushed between a tugger unit and a stationary transformer unit, resulting in hospitalization.",1
"An employee was preparing a dog for a bath and nail trimming. As the dog was attached to the groomer's helper, it became violent. The dog did a barrel roll and proceeded to bite the employee's hand as it tried to escape from the groomer's helper.",1
"An employee was operating a CNC machine when his sleeve was caught in either the tool or the part, pulling him into the rotating spindle of the machine. He suffered left arm damage that required surgery.",1
An employee was removing boxes from the stack-off conveyer when his glove became caught in a knuckle chain. His right finger was partially amputated.,0
"An employee was using an oxygen and acetylene torch set to heat up the rollers on the excavator in order to change the tracks out on the equipment. While heating the rollers with the torch, the oil inside the rollers was heated. The pressure from the rollers and heat caused the heated oil to splash on the employee's face, causing second degree burns.",1
"On or about March 14, 2016, two employees got into an altercation while rinsing at the wash sink.  The first employee took a knife and meat hook and struck the second employee, lacerating his clavicle area and neck. The first employee suffered a laceration to the side of his face.",1
"On or about March 14, 2016, an employee was closing the office safe door when the door closed on her hand, amputating her right thumb.",0
"An employee was operating a sand blaster when the sand blaster whip hose fell. The blast media penetrated the employee's sand blast suit and lacerated the employee's forearm, requiring hospitalization.",1
"An employee was at her work station packing chicken wings when she dropped a bag of wings. As she bent over to lift them, she fell backward and landed on her hip. She was hospitalized with a broken hip that required surgery.",1
An employee amputated the fleshy part of a finger when an automatic feeder malfunctioned.,0
"An employee was cleaning gutters on a residential roof. The employee fell 20 feet off the roof while pulling on a hose that was stuck, dislocating a shoulder and requiring stitches.",1
An employee was working in an excavation when he was hit by a front loader on both ankles. Both ankles fractured and required hospitalization.,1
"An employee was running to help a coworker when he tripped and fell to the cement on his knees, fracturing both kneecaps.",1
An employee was moving a 20lb. bucket of scaffolding parts off of a dolly and strained his back.,1
"While driving a forklift in the parking lot, an employee hit a pothole and suffered a concussion that required hospitalization.",1
"While aligning a bag on the sample machine, an employee suffered three right-hand fingertip amputations.",1
"During a drill assembly task, an employee was hooking up wires inside the arm of a drill. The employee stepped over the arm, fell approximately 2 feet, and struck his head on the pavement.",1
"An employee was between two docking blocks when a forklift driver who was getting into position to lift the blocks removed his foot from the brake pedal. The forklift moved slightly, causing the blocks to tumble onto the employee.",1
An employee was helping to place a mandrel into a wire reel. The mandrel shot through the hole and pinched the employee's middle finger between the wall and mandrel. The employee's finger was amputated above the first knuckle.,0
"Employees were dropping off and loading product into a bay delivery trailer. One employee was operating a forklift and the second was operating a walkie-rider pallet jack.  As they were transitioning from one side to the other, they rounded the corner, sounding their horns, and collided at the rear of the trailer. The second employee was caught between the mast of the forklift and load guard of the walkie-rider, resulting in fractured ribs.",1
"An employee was working from a ladder, installing cable lines to the eave of a roof over a driveway, when he fell off the ladder. He injured his head, pelvis, rib, and arm on his left side and was hospitalized.",1
"An employee was hanging an oil drip pan on one of the gear boxes next to the conveyor when his glove became caught on the conveyor roller. His right hand was pulled under the belt toward the drive motor, resulting in a deep laceration.",1
"An employee was elevating a manlift on the construction site to paint the side of the building. The employee was wearing a safety harness and was tied off in the basket at the time of the incident. The wheels of the lift began to sink in the ground, causing the manlift to tilt over. The lift fell to the ground on its side with the employee tied off in the basket. The employee's right hand broke while trying to brace for the fall.",1
"Workers were testing the rotation on a motor when a shaft cover on the machine became dislodged and hit a nearby employee in the left lower leg. The resulting impact fractured the employee's tibia and fibula, requiring surgery and hospitalization.",1
An employee was trimming a tree on the property of the company when a tree limb fell on him. He then fell 10 feet and fractured his right shoulder and foot.,1
"An employee was walking across a freshly mopped floor when she slipped and fell, fracturing her ankle.",1
"While an employee was completing the batch drop process, a fire flash occurred, burning his right hand and face.",1
"An employee slipped and fell on a curb, fracturing his kneecap.",1
An employee was up on the deck of the plasma cutter to operate the panel control box when he tripped falling forward onto the surface of the plasma table. He tried to break his fall with his right hand and broke his right wrist.,1
"An employee was washing the inside hood of a transformer. As he was closing the hood, his hand slipped off and the hood came down and smashed his left middle finger. His fingertip was amputated.",0
"On March 14, 2016, an employee fell approximately 5 to 6 feet from a baker's scaffold while working on crown molding, breaking his right wrist, fracturing his hip, and fracturing his vertebrae.",1
"An employee was operating a golf cart. The cart flipped on its side when the rear wheel made contact with a parking lot's raised curb. The employee's right ankle was pinned between the cart and the pavement, causing the ankle to break.",1
An employee tripped over a small lip in the floor and fractured his humerus after striking the ground.,1
"An employee was removing the nails securing two scaffolding planks together. A coworker had removed the support beam beneath the scaffold platform. When the employee removed the nail holding the two overlapping scaffold planks together, the planks collapsed, and the employee fell 8 feet to the concrete floor, face first. The employee suffered a broken right upper arm, broken cheek bones, and a broken nose.",1
An employee stepped on a sensor pin which resulted in the amputation of her 5 right toes.,1
An employee was attempting to push down on the anvil in a T-nut machine when his right index finger became trapped in the machine. His finger was partially amputated.,0
An employee was hospitalized with an infection after a piece of metal became stuck in his right hand while he was moving a metal table.,1
An employee was cleaning around a machine when his cleaning rag and finger were pulled into the machine. His finger was amputated. The machine was running at the time of the incident.,0
"While climbing down a ladder, an employee was struck by a fan blade, suffering facial and forehead lacerations.",1
An employee tripped and fell while walking down an internal staircase resulting in a broken leg and in-patient hospitalization.,1
An employee was connecting steam lines to an icing bowl when her right forearm was caught and crushed between the lifting arm and the icing bowl. She sustained forearm tissue damage that required surgery and overnight hospitalization. The steam lines were not fully connected at the time of the incident.,1
"After delivering material to a site, an employee stood on top of the DOT bar to close his tractor-trailer's rear door. He slipped, and the door hit his left arm, causing a fracture and 1-inch laceration.",1
"An employee was removing debris from an air compressor when his hand contacted the compressor's rotating fan, fracturing and lacerating three fingers and amputating one finger.",0
"On 3/15/16, at 8:18 AM, an employee was operating a dock stacker when his thumb became pinched between the stacker and a bollard while leaving the staging area for automation. The employee was hospitalized and required surgery for crushing injuries to his thumb.",1
An employee was placing a core into the core chuck machine when the cylinder actuated while his finger was in the hazard area. His right ring finger was pinched and partially amputated.,0
"While performing maintenance on a saw, an employee's left hand contacted the moving saw blade, resulting in a left-hand avulsion. The saw guard was not affixed properly at the time of the incident.",1
"An employee was moving a mobile piece of equipment when the caster wheel rolled over his left foot, crushing/amputating half of his little toe.",0
"An employee dislocated her pelvis while opening a wooden office door on March 15, 2016, at 9:00 AM.",1
"On or about March 15, 2016, an employee was climbing a ladder attached to a trailer to disconnect a hose when he fell to the ground, suffering cuts, bruises, and injuries to his head, as well as a concussion. He was hospitalized.",1
"An employee was using a hand tool (4- to 5-feet-long stainless steel rod with a two-pronged end) to pull meat out of a dump hoist vat and into a hopper. The hand tool (two-pronged end) became caught on the running/rotating hopper paddles, pulling the tool and the employee into the interlocked barrier guard. His finger was caught between the guard and the tool handle, partially amputating the right fourth digit's distal phalanx and lacerating the right fifth digit.",0
An employee was bitten by a snake while working on an open box to operate the valve.,1
"An employee was operating a 75-ton die cutter and was having problems with the sensor position device. While he was attempting to adjust the sensor, his left index finger was crushed by the machine. The die cutter was running at the time of the incident.",1
"An employee was loading hogs onto a trailer when two hogs darted out and pushed a gate into the employee. He fell and struck his head, suffering a 2- to 3-inch head laceration and requiring hospitalization.",1
An employee was struck by a steel beam and pinned between the beam and a wall. The employee was hospitalized with a bruised abdomen.,1
An employee was removing a snake from the spa pool area while standing on a 6-foot A-frame ladder. The snake lunged at the employee and startled him. He attempted to step down on the ladder and missed a rung. He fell to the ground and suffered a compound fracture to the left ankle.,1
"An employee was cutting egg crates using a band saw. While attempting to remove a small scrap from the cutting area, she swept her hand backward into the saw blade, partially amputating her left middle finger at the second knuckle.",0
An employee was laying down insulation over a roof's hatch opening when he stepped on the insulation that marked the opening and fell to the concrete lower level. He was hospitalized with a fractured tailbone.,1
"An employee was cutting a roof vent on a steep roof using a hook blade utility knife when he lost his footing. The blade contacted his left arm, severely cutting it to the bone.",1
An employee was setting floor trusses using a ladder when he fell from the ladder and broke his ribs.,1
"During a sales blitz activity, an employee participated in one of the 'minute to win it' games. The game involves a small Kleenex box with balls in it and a ribbon that goes around the waist, and the player has to twist their waist to get the balls to come out. As the employee twisted her waist, she injured her knee.",1
"On or about March 15, 2016, an employee was attempting to remove a bearing from a conveyor when his finger was pinched between a metal gate and the conveyor, partially amputating his left ring fingertip.",0
An employee's finger was amputated while using a table saw.,1
"While moving product outside, an employee stepped on a nail, impaling the foot.",1
"An employee was at table saw cutting wood when the saw began kicking back. The employee attempted to stop the kickback and made contact with the blade, cutting her palm up to her middle finger.",1
"An employee suffered from 2nd and 3rd degree burns to his chest, waist, and left hand when the shirt he was wearing caught fire while he was operating a gas-powered cutting torch to cut 8 bolts.",1
An employee suffered a finger amputation.,1
"An employee was using a band saw to cut down sirloin steaks when his hands came in contact with the saw blade, amputating his left thumb tip.",0
"On or about March 16, 2016, at approximately 4:00 p.m., an employee was trying to clear a jam on a conveyor that was transporting cones on molds when an automated oven door came down on his hand and pinched his right middle finger, amputating the nail and fingertip. The equipment was not locked out at the time of the incident.",0
"An employee was walking through the store to hand out food samples and had turned around to talk to a coworker. When she turned back around to continue on her way, she ran into a pole. She fell down and struck the back of her head, requiring hospitalization for concussion symptoms.",1
"While looking for a tool, an employee tripped and fell to the concrete floor, fracturing his hip.",1
An employee was removing a lineup clamp from a piece of pipe when his finger was caught between the turtle clamp and a metal ring. The tip of his right middle finger was amputated.,0
"An employee was securing the lift gate on the rear of a delivery truck when his glove became stuck in the lift gate, trapping his finger between the truck and lift gate. His fingertip was amputated from the top knuckle to the tip. He was hospitalized for treatment.",1
An employee was operating a remote-controlled tree trimming robot when the equipment ran over and fractured his right ankle.,1
"An employee was exiting the trailer of his 18-wheeler when he tripped and fell approximately 4 feet to the paved ground below, breaking his left hip and requiring hospitalization.",1
"An employee was on his last delivery. As he entered his trailer, the cables on the door broke and struck him on the head. He fell out of the trailer, and the door caught his ankle. He suffered a blood clot and required foot/ankle surgery.",1
"An employee was helping to adjust equipment. She tripped as she was walking around the equipment. When she reached out to catch her fall, her right hand entered the point of operation. The equipment activated, pinching and amputating her right pinky finger between the stockholder tab and discharge table.",0
"An employee was standing next to the bandsaw operator when he contacted the moving bandsaw blade, amputating four right-hand fingers down to the knuckle.",1
An employee fell off a roof that was 10 feet high and fractured both wrists.,1
"An employee was struck by a passenger automobile while performing road construction activities. The employee suffered leg and face injuries, including lacerations, crushing injuries, and bruised bones.",1
"An employee was climbing back into his truck when he lost his footing and fell backward, rupturing his eardrum and severely injuring his left ribs, shoulder blade, clavicle, and hand. The area was experiencing a snowstorm at the time.",1
"An employee was working in the proofer room, scoring and aligning dough on the conveyor line, when the conveyor moved and caught the employee between the conveyor table and a structure in the room. The employee suffered a collapsed lung, lacerated liver, and broken spine.",1
"An employee was replacing plastic flapper in the de-icer machine when the start lever activated the de-icer. The employee's left arm was crushed inside the machine, which was not locked out at the time of the incident.",1
An employee was troubleshooting an eye machine when all four fingers on his right hand were crushed and broken between the rear bearing plate and the main slide floating assembly.,1
An employee's finger was amputated while cutting wood flooring on a table saw.,1
"An employee was threading pipe on a threading machine when his glove was caught in the machine, amputating his right pinky finger.",1
"A maintenance employee had opened a bag of materials with a pocket knife. While attempting to close the knife, the blade shut on his left little fingertip, amputating it.",0
"An employee was laying brick from a scaffold. The employee stepped off the end of the scaffold and fell to the ground, breaking a wrist and requiring  surgery.",1
"On 3/16/16, an employee inverted her ankle and fell on her hip while standing.",1
"An employee was changing hose reels at the Cover Extruder machine when his right thumb was caught in the Kevlar string used to splice two sections of rubber hose, amputating it above the first knuckle. He required surgery.",1
An employee was opening and closing the doors of vehicles when her right index finger was smashed by a door. Her fingertip was surgically amputated.,0
An employee lost grip of the grab bar while entering the cab of a truck and fell to the asphalt pavement. The employee suffered a hairline fracture in the right hip and multiple left wrist fractures.,1
"An employee slipped and fell while getting out of a vehicle, suffering a bruised spleen.",1
An employee was sprayed by chemicals while checking a valve on a storage tank containing mixed acid. The employee suffered chemical burns and was hospitalized.,1
"While plugging an extension cord into a vacuum, an employee was shocked by the cord, which was missing a ground prong. The employee experienced an irregular heartbeat.",1
"An employee was unloading pipe from a drop-side trailer. He lowered the gate, but the pipe would not roll out. The employee went to the opposite side to push the pipe with his right arm. The pipe fell on and fractured his upper right arm, requiring hospitalization.",1
"A dozer backed over an employee while he was setting up survey points, breaking his left leg.",1
An employee sitting at a desk was hospitalized after being bitten by a spider.,1
"An employee was inspecting demolition work that was completed at the end of the day when he was struck by a piece of structural steel, lacerating and crushing a toe on his right foot. He was hospitalized.",1
"An employee was going to the break room, caught her foot on the door jamb, and fell breaking a hip.",1
"Employees were in a fist fight when one employee fell and hit his head on the ground, suffering a minor concussion.",1
"An employee was turning steel members to attach a bar code on the material. While flipping one piece of material, the piece next to it rolled back and caught/amputated his left index fingertip in a pinch point.",0
An employee was hospitalized with a head laceration after falling to the floor in the workplace.,1
"At 12:20PM on 3/17/2016, an employee was delivering mail on a foot route when the sliding door of a van slammed on his right index finger, amputating his fingertip.",0
"An employee accessed a work platform through a 2-feet by 2-feet opening. He stepped into the opening and banged his shin against the metal frame, fracturing his right tibia just below the kneecap and requiring hospitalization for surgery.",1
An employee fell from a ladder while working on some pipes in the ceiling and bumped his head. He was hospitalized overnight with lacerations and a contusion.,1
"On March 17, 2016, an employee suffered a compound fracture of the right arm while cleaning a conveyor belt.",1
"An employee was cutting 2x6 lumber used to frame the exterior of a building. He had the lumber stacked on saw horses and was using a cordless saw to 
trim it. After he completed the cut, a small piece 
of the wood became lodged inside the saw guard, causing the guard to become stuck 
in an open position. Not knowing that the guide was stuck, he set the saw down by 
grabbing it with his left hand. With the combination of the guide being stuck and the 
blade still in motion, the moving saw blade made contact with and amputated his left middle finger.",0
An employee was participating in equine training when he fell off the horse. He was hospitalized with fatigue.,1
"On 3/18/2016, an employee was connecting two sheet metal sheets to finish an enclosure. While he was sliding the sheet into the interlocking system, a chain came loose and caught his left ring finger with the sheet metal. He was hospitalized for surgery.",1
"An employee was riding on the side of a forklift when he was struck by a second forklift, crushing his left foot.",1
An employee was emptying trash into the dumpster when their finger got caught between the dumpster and the hand rail resulting in amputation of the left ring finger.,0
"An employee was driving a forklift, traveling to his next pick-up, when the road embankment gave way beneath his tires and caused the forklift to turn over. He broke nine ribs, punctured a lung, and lacerated his forehead and right elbow.",1
An employee became ill after soldering inside a walk-in refrigeration box. The employee was hospitalized due to heavy metal exposure.,1
An employee was connecting the air hose to the saw. The saw was on and amputated fingers on the employee's left hand.,1
"An employee was working on a machine with a pry bar when the bar slipped, causing him to lose his balance and step backward into a sub-pump hole filled with hot water. The employee sustained 2nd degree burns to his left leg and was hospitalized on March 18, 2016.",1
An employee was cutting 4x4 trimming pieces with a radial arm saw when the saw blade amputated three left-hand fingers starting at the pinky.,0
"An employee skiing downhill fell and broke a forearm, requiring hospitalization.",1
An employee had replaced a clutch in a drive belt when he tripped on the concrete base and struck his left hand on the unit frame. His fingertip and a small amount of bone were amputated.,0
An employee was working on a roof and fell on the same level striking his back on the standing seam roof deck resulting in a back fracture.,1
"At 7:50 a.m., on 3/18/16, an employee was skiing to his lift assignment for the day. As he was approaching the bottom of the chairlift, he hit a rock underneath the snow, which caused him to fall. He was hospitalized with a fractured left femur.",1
"An employee was walking around a coworker in the kitchen area when she tripped and fell, injuring her right groin area.",1
"On March 18, 2016, at approximately 6:15 a.m., an employee was operating a stand-up forklift and traveling toward the battery changing area when his left hand made contact with the overhead racking system, amputating his left pinky finger near the knuckle.",0
"An employee was operating a powered industrial truck when the right front tire hit a pot hole, causing the truck to tilt over. The protective cage fell on and injured the employee, who required hospitalization.",1
"An employee was working at a conveyor belt when his left hand became stuck between the conveyor belt and the guard, lacerating four fingers and amputating the ring fingertip.",1
"An employee was draining a chiller while standing on a platform to push back poultry. The paddle of the chiller struck the employee's elbow and pushed it into a guard, lacerating it and requiring hospitalization.",1
"An employee walked outside to get the client's newspaper and slipped in the client's garage. She fell and hit her face on the tracks of the garage door, suffering a nasal septal fracture and upper lip lacerations.",1
"While loading an electric pallet jack onto the back of a trailer, an employee slipped and fell approximately 4 feet off the lift gate and onto the parking lot asphalt, fracturing a bone in the elbow area.",1
"As an employee filtered oil in a fryer, the hose used to circulate the oil though the filter came loose, and the oil flowed out onto employee. The employee suffered facial and right arm burns.",1
An employee was retrieving merchandise from an elevation using an order picker when a second order picker struck his and caused him to fall to the ground below. He suffered a broken pelvis/hip.,1
"An employee was performing sanitation work when he entered the picking room.  There was fog in the room. The employee stumbled and entered a flow of steam from water that was draining out of the scalder tank. He suffered severe burns on his left leg, ankle, and foot, requiring overnight hospitalization.",1
"An employee walking beside an excavator slipped or stumbled on the dirt track from the excavator, lacerating the left leg.",1
"On 3/18/2016, two employees were changing a 1-3/4 inch screw for a mill support. While the first employee manually adjusted the nut on the screw, the second employee proceeded to adjust the screw with a pneumatic drill, injuring the first employee by crushing his right hand thumb between the nut and the mill support surface.",1
"An employee was bringing product to the back of a truck trailer when a book case began falling. He fell as he tried to catch the falling case. His foot was caught in the truck ramp and he twisted his ankle, breaking it.",1
An employee was moving boxes when he started having chest pain. He was hospitalized with a musculoskeletal chest injury sustained while moving the boxes.,1
An employee's hand was resting on a part that then moved into machine rollers. His right index finger was amputated.,1
An employee was testing the galvanized metal shear when a right-hand finger was caught and amputated by the shear.,1
A worker troubleshooting a hydraulic press cycled the machine while another employee's finger was inside the lower cylinder. The injured employee's fingertip was partially amputated.,0
"An employee descending a staircase tripped and fell approximately 5 steps, landing on her left side and suffering a head injury and fractures.",1
"An employee was power washing exterior windows when the end of the washer tip went across his left hand, lacerating it and requiring surgery to repair a damaged tendon.",1
"An employee was operating an up-cut saw. As he was putting a piece of wood in the saw, his left foot stepped on the foot pedal and cycled the machine. The saw blade amputated his right ring fingertip.",0
"An employee and his coworker were holding a 3-feet-long pipe that was 4 inches in diameter and approximately 30 pounds to move it inside a ship. As they set the pipe inside the boat, the employee felt a pull in his groin. He was hospitalized and required surgery.",1
"An employee was feeding material into the moulder during the setup process. The employee fed a thin piece of material into the moulder and then thought it was jammed in the machine. When she went to the operator to point out where it was jammed, her glove was pulled into the cutter head and her index and middle fingertips were amputated.",0
An employee fell off the ladder while cleaning the ceiling vent.,1
An employee was operating the carbon fiber spinning machine and cleaning out the valve. A finger got pinched when the valve closed resulting in the amputation of the right index finger.,0
"An employee was lifting the end section of pipe to help clear an I-beam of a pipe rack. As the crew moved the pipe forward, the employee's left thumb was caught and amputated between the pipe and an I-beam support member.",1
"An employee was closing a door to the tool room with a hook chain. The wind  blew and slammed the door shut on the employee's lift index finger, amputating the employee's fingertip.",0
An employee was attempting to clear a jam at the rotary airlock discharge when the airlock rotated and amputated his fingertip.,0
"An employee on a ladder was unwiring a spindle motor from a grinding machine. The employee fell from the ladder to the concrete floor, fracturing the left wrist and left hip and requiring hospitalization.",1
An employee conducting maintenance work was caught in the sprocket of a moving conveyor and fractured bones in his left wrist.,1
An employee injured his left-hand finger while changing the tire on a rim.,1
An employee fell off a 12-foot ladder and was hospitalized with multiple fractured ribs.,1
An employee was cutting an overhead steel member with a cutting torch when molten slag fell onto his clothing and ignited it. He suffered 1st and 2nd degree burns to his back and additional burns on his hand.,1
"An employee was checking an air blower to determine if it was operational when the force of the intake pulled his hand into the fan blade, amputating approximately half of his left pinky finger.",1
An employee was installing metal decking when he fell while trying to grab a piece of sheet metal that was elevated by a forklift. He fell approximately 15 feet to a dirt surface and was hospitalized with head and neck trauma.,1
"An employee was trimming tree limbs when he was struck by a truck driven by a patron. He suffered right leg and head/brain trauma, requiring surgery.",1
"An employee was unloading students from a chair lift when one of the students skied over the employee's skis, causing him to fall and fracture his hip.",1
"An employee was inspecting a customer's vehicle in the parking lot when he slipped on ice and fell, breaking his leg.",1
"While standing in a squatting position, an employee stepped backwards, tripped over a pallet, and landed on his left backside, fracturing his left hip and requiring surgery.",1
An employee walking between buildings slipped on the damp floors and fell. She broke a bone in her elbow and was hospitalized.,1
"An employee was lifting up a metal floor plate to access the switch to reset the escalator. The metal plate fell on his hand, amputating the top third of his finger.",0
"While cutting chicken wings into segments using a back saw, an employee amputated the distal segment of the left-hand thumb.",0
"An employee and a coworker were trying to introduce air into a condensate line to empty it. When the employee went to remove a plug from a valve on the condensate line, hot water splashed onto his left shoulder, arm, and back, causing second degree burns.",1
An employee was operating a pallet jack when her finger became pinned between the handle of the pallet jack and a pallet that was behind her. Her right little finger was amputated at the top joint.,0
"On or about March 20, 2016, an employee was operating a track excavator when his leg contacted equipment that contained hydrated lime. He suffered a chemical burn.",1
"An employee was loading the zinc tank from the vacuum truck. The truck hose recoiled, struck the employee's respirator, and splashed chemical onto the employee's face.",1
"An employee was attempting to pull a mattress off a third-tier rack shelf when he fell to the concrete floor, suffering head trauma and loss of feeling. Fall protection was not worn at the time of the incident.",1
"An employee was loading three 10-foot pipe pieces weighing 600 pounds onto a conveyor roller while operating a forklift. One of the pipes was not aligned properly with the roller conveyors. The employee got off the forklift and attempted to properly align the pipe. The pipe fell off the roller conveyor and onto the employee, who suffered a compound fracture to the lower left leg and required surgery.",1
"An employee was cutting welds inside a coal pulverizer when coal dust fell from above and caused a flash fire. The employee suffered 2nd and 3rd degree burns to the face, hand, and arm.",1
An employee slipped on ice in the parking lot and fractured her hip.,1
"An employee was engaged in helicopter flight training for the US Army. The helicopter lost engine power and crashed. The employee suffered three fractured vertebrae, a fractured sternum, broken teeth and abrasions to the elbow and knee.",1
An employee was directing traffic when a golf cart came from behind and struck the employee. The employee suffered facial fractures.,1
An employee injured his right eye when he made contact with a metal peg while bending down to adjust merchandise hanging on a peg-board style display rack. He required surgery and hospitalization.,1
An employee missed the last rung while descending a ladder. He fell backward and struck his head. He was hospitalized with a head laceration and broken back.,1
"An employee was moving a pipe to another pipe to be welded. As the employee was maneuvering out of the way of the moving pipe, he tripped on another pipe that was laying on the ground. He fell onto that pipe and broke his left wrist, requiring hospitalization.",1
"While inspecting a roof, an employee fell approximately 40 feet through an HVAC hole to the ground below, breaking multiple bones and suffering internal injuries.",1
"While backing a forklift out of a trailer, an employee's hand hit a bollard. The employee suffered a blood clot and fractured finger.",1
"An employee was ascending a tree. At 20 feet, he wrapped his climbing lanyard around a limb. When he put his weight on it, the limb broke, and he fell 20 feet, hitting a branch on the way down. He suffered forward shift vertebrae injuries.",1
An employee was cutting a bag with a knife when the knife slipped and lacerated the employee's hand and abdomen.,1
"On March 21, 2016, at approximately 2:00 p.m., an employee was feeding materials into a punch press when the back adhesive on the materials became tacky and caused them to jam.  When she attempted to remove the jammed materials, the machine was activated via the foot pedal, crushing her right-hand middle and ring fingers. Her middle and ring fingertips had to be surgically amputated.",1
"An employee was pushing a cart of clothes when her foot hit the carpet, causing her to fall forward to the floor. She broke both arms and her nose.",1
"An employee was attempting to enter the back of his delivery truck when he stepped on the dock plate, slipped, and fell, breaking his left hip. The dock plate was wet from the snow. He was hospitalized overnight.",1
"An employee was picking up freight and on the dock. As he bent over to unlock his truck door, a cable broke on the raised roller door over head, causing the door to drop suddenly and strike the employee in the back. The employee was wedged between the roller door and the truck door, suffering a broken vertebra, a few broken ribs, and a bruised right ankle.",1
"An employee was working with a screw jack when it became stuck. When he tried to move the screw jack, it fell and amputated his left middle fingertip.",0
"While reversing a high-reach forklift, an employee was struck by another forklift, suffering a right lower leg fracture.",1
An employee was cutting material using a guillotine cutter when the blade came down and crushed/amputated the employee's left index and middle fingers.,0
"On 03-21-2016, an employee was cleaning the rotary valve section of a cheese de-weigher when the valve's rotating paddles amputated the employee's left-hand ring and middle fingers.",0
"An employee was grinding on tack welds when the grinder lost power. As the employee was checking the cord, the grinder restarted and lacerated the employee's left thigh above the knee.",1
"An employee was attempting to rig a concrete weight to move it away from the gangway. The vessel shifted in the water and moved, pinning the employee between the gangway and the concrete block. The employee suffered a broken hip.",1
"After he had changed a block and adjusted the wire rope in the sheave, an employee's right hand was pulled between the wire rope and the block. His hand was amputated and required hospitalization.",1
"Employee 1 was in front of an electric pallet jack picking groceries from shelving.  Employee 2 was in front of Employee 1 with a pallet jack doing the same.  Employee 1 thought Employee 2 was going to move forward, but Employee 2 didn't. Employee 1 kept moving forward with his pallet jack and got wedged between the two pallet jacks breaking his ankle.",1
Two employees were picking up two angle iron supports and putting them into the metal scrap trash can. The angle iron supports hooked one of the employee's fingers and amputated the fingertip.,0
"An employee was helping a coworker remove fabric from a fabric cutter when the blade came down and partially amputated the employee's second, third, and fourth digits of her left hand.",0
"An employee slipped on a lid that had fallen off an ice-tea urn and fell on her right side, hitting her shoulder/head on the floor and fracturing her right clavicle. She also had a seizure and was unconscious.",1
An employee was walking in the office when her foot was caught on the edge of a floor mat. She tripped and broke her right femur.,1
"An employee was conducting a roof inspection when she fell off a ladder to the ground, fracturing her skull and pelvis and losing consciousness.",1
"While climbing a cellular communication tower that was approximately 382 feet aboveground, an employee suffered an upper hernia tear in his abdomen.",1
An employee was about to step onto a homeowner's roof when he fell backwards 10 feet resulting in a spinal cord fracture and hospitalization.,1
An employee was using a crowbar to straighten a part when the crowbar slipped and the employee lost her balance. She fell backwards and hit her head on the base of a heat treat rack that was positioned behind her. The employee fractured her skull and injured her neck.,1
An employee cutting trees was struck by a nearby tree. The employee sustained a broken left arm between the wrist and the elbow and was hospitalized for surgery.,1
An employee who had been repairing equipment was found convulsing on the floor while holding an electrical cord. The employee suffered electrical burns.,1
An employee injured his foot and leg while inspecting a semi-truck in an icy parking lot.,1
"An employee was using a slitter to cut corrugated cardboard. When he tried to make an adjustment, the input wheel grabbed his glove and pulled his finger in, causing the slitter to crush his finger. His right ring finger was amputated.",0
"An employee snowboarding down an intermediate run caught an edge and struck a tree, suffering a lung contusion.",1
An employee was installing an eave on a manufactured home using a pneumatic staple gun when the gun discharged a staple into his left kneecap.,1
"An employee in a bucket truck was dismantling powerlines when he was electric shocked, suffering burns to both hands. He was hospitalized overnight.",1
An employee was hospitalized for breathing problems potentially associated with dust from construction activities.,1
"An employee was sitting in a chair near the baggage conveyor belt. At the same time, a tug that was towing three baggage carts was making a turn around the baggage belt. During this turn, the last cart struck a concrete bollard and overturned. The overturned cart struck the employee, who suffered a broken ankle.",1
"An employee was standing to the side of a load of wood being put in the kiln. The load shifted and fell on his right leg and foot, fracturing them.",1
An employee was operating a lathe when his arm became stuck in the machine. He was hospitalized with a possible amputation.,1
"An employee was lifting an 8"" pipe to place it on a pickup truck when the pipe slipped out of his hand and fell on his right index finger. The pipe severed his index fingertip, which had to be surgically amputated.",1
"On 3/22/16, at 5:15 PM, an employee was walking down the indoor employee entrance stairs when she fell and broke her left arm and leg.",1
"A load of steel in a 3x16 foot crate shifted while it was being strapped/secured to a truck, landing on and breaking an employee's ankle.",1
"An employee was neutralizing an empty railcar that had carried sodium hydroxide. While the employee was cleaning the tank, sodium hydroxide splashed on his face and arm, causing 2nd degree chemical burns.",1
"An employee was pouring cement from a truck when he noticed a hard piece of cement on the conveyor belt. When he attempted to remove the cement, the belt lacerated and broke several of his right-hand fingers.",1
An employee fell to the floor while passing out medications and suffered a right arm fracture.,1
"While walking down a driveway, an employee slipped on loose gravel, fell to the ground, and fractured a hip. The employee was hospitalized.",1
"An employee tripped on a step and fell forward. When he fell, his left hand entered tar and received burns.",1
"An employee was ascending a 32-foot ladder to deliver roofing supplies at a two-story home. Once he stepped off of the ladder onto the leading edge of the roof, his foot gave out, and he fell to the ground. He was hospitalized with a left tibia fracture.",1
"An employee was troubleshooting the CNC line glue spreader and was attempting to push and pull a board through the spreader. When the employee pulled the wood through, the wood came down and crushed his finger, which was on a guide, between the guide and wood. His right middle fingertip was amputated.",0
"An employee had just checked an air compressor that was mounted to the back of a pick-up truck. He slipped while exiting the back of the truck bed and fell approximately 3 feet, injuring his right hip.",1
"An employee had been working on a 12- to 14-feet-high roof and was descending an extension ladder. The ladder was tied off and extended 3 feet above the roof at the time. The ladder slipped out from underneath the employee when he was at the top, and he fell 12 to 14 feet, suffering a hairline fracture of the pelvis and a broken pinky finger.",1
"An employee was struck by a privately operated vehicle while standing to the side of a waste management truck. The employee was collecting trash from curbsides at the time. He suffered a broken leg, kidney bruising, and internal bleeding/bruising.",1
"An employee was showing a second employee how to install a drive shaft onto a rotor plate. The drive shaft had to be aligned and seated onto the rotor plate by using a leather mallet and striking the drive shaft repeatedly. While attempting to stabilize the drive shaft, the second employee placed his index finger on the end of the shaft. The first employee struck the second employee's finger against the drive shaft with the leather mallet, crushing his left index finger, which had to be surgically amputated.",0
"An employee was performing maintenance on a horizontal grinder and had the guard in an upright position to access the work area. A strong gust of wind displaced the guard and it fell on the employee's head, resulting in torn neck ligaments. The employee was wearing a hard hat at the time of the incident.",1
An employee sustained left chest trauma when a sand blaster he was operating shot steel pellets under his left armpit.,1
"An employee was injured while walking through a non-tempered, automatic glass entrance door. The employee suffered cuts to the left leg, face, and right hand and required surgery to repair a leg muscle.",1
An employee was keeping boxes from falling in front of the Bobcat truck. The Bobcat truck ran over the employee's left foot crushing it.,1
An employee's right ring fingertip was amputated when a delivery truck's sliding door closed on it.,0
"An employee exited the building to go to the back patio and the door locked behind him. To re-enter the building, he attempted to climb a security fence. The employee became caught up in the fence's barbed wire and fell to the ground, landing on his back and right side. He was hospitalized with three broken ribs, a bruised lung, and lacerations and scratches.",1
"An employee was operating a pallet jack when another forklift operator hit the forks of a third lift, which was holding a stack of empty pallets. A plastic pallet came loose, fell, and struck the employee in the face, fracturing his nose and causing a possible concussion.",1
"An employee suffered a left leg injury while exiting a stand-up reach truck, requiring hospitalization.",1
The employee was getting product from the machine and contacted the machine blade resulting in lacerations.,1
"An employee was conducting an occupational therapy activity with a patient when the patient's dog bit the employee, lacerating her lip and cheek.",1
"An employee was attempting to remove a cardboard corner post on a pallet. He was using his right leg as leverage on the pallet. As he was bending the corner post, it released, and the pallet slipped out from under his foot. He fell back onto the concrete floor, breaking his left hip bone.",1
"An employee was working on the roof. He lifted up a wooden hole cover and stepped forward into a roof hole, falling 15 feet to the concrete floor below. He fractured his elbow, vertebra, and pelvis.",1
"On or about 3/23/2016, at approximately 9:30, an employee was working from a 15-foot fiberglass extension ladder to install satellite TV cable at a residential home. The employee was drilling holes to install clips that hold the cable to the side of the building. While working from the ladder, the employee fell approximately 15 feet to the concrete below, suffering injuries to both legs/feet that required hospitalization.",1
"On March 23, 2016, around 6:30 a.m., an employee slipped and fell while entering a building, breaking her ankle.",1
"While installing vinyl siding on a roof, an employee fell approximately 8 feet to the lower ground level, sustaining compound fractures to the right leg, tibia, and fibula. Fall protection was not worn at the time of the incident.",1
An employee amputated two fingers while a cleaning a mixer.,1
"An employee was using a motorized pallet jack to move cardboard recycling bins. While the employee was steering, the jack became stuck and pinned the employee's ankle to the storage racks. The employee suffered a broken tibia/fibula.",1
"An employee was feeding lumber into a planer when a piece jammed. When he attempted to clear the jam, his right little finger was lacerated. The finger had to be medically amputated.",0
An employee was attacked while on duty. The employee was hospitalized with a broken hip.,1
"On or about 3/23/2016, an employee was unloading a truck when a coworker operating a PIV backed into him, pinning him between the PIV and another PIV. He suffered a crushing injury to the left knee and leg.",1
"While operating a brake press, an employee amputated four right-hand fingers when the foot pedal activated during a change over.",1
"An employee was opening/unfolding a wheelchair by pressing down on the sides of the seat when her finger went between the base and bracket of the wheelchair. When she pulled her finger out, her fingertip was amputated.",0
"An employee was putting snow chains on his tires. While he was tightening the chain cam, his right middle finger became stuck under the tire chain and his fingertip was amputated.",0
"An employee was conducting a fire wall inspection while working from a ladder. While descending the ladder, the employee lost their footing and fell against an adjacent countertop and then to the floor, breaking ribs.",1
"On March 23, 2016, at approximately 1:30 a.m., an employee was cleaning out a vertical blender. When she opened a 10-inch x 10-inch door on the side of the blender, her right hand was caught between the side of the blender and the moving auger, amputating four fingers. The machine was energized at the time of the incident.",0
"An employee was hooking chains between a yard dog and a transport truck that was stuck in the parking lot. The yard dog driver exited the vehicle without parking it to help the injured employee unhook the vehicle. The yard dog rolled back and pinned the injured employee between the truck and yard dog, fracturing the employee's ankle and heel bone.",1
"While loading friction paper into a laminator, an employee's left hand became caught between platens, lacerating the third and fourth fingers. The fourth finger had to be surgically amputated.",0
"An employee was taking batteries from a conveyor belt and placing them on the lift table for shipping. The employee stepped backward, tripped on the anti-fatigue mat, and fell to the floor, suffering a right hip injury.",1
"On or about 03/23/2016, at 9:00 AM, an employee fell from the cargo area of a pickup truck when the truck starting moving forward. The employee had been setting up signs to prepare a road lane closure. During the fall, he hit his head and lacerated his left arm.",1
"On or about 3/24/2016, an employee's finger was amputated while feeding a thermal former machine.",0
"An employee was unloading a pallet of pavers from a semi-truck with a tractor. The pallet of pavers shifted forward and fell off the tractor, causing it to jerk backward. The jerking of the tractor caused the neck of the employee to whip back, fracturing his C5 vertebrae. He experienced numbness in both arms and was hospitalized.",1
An employee on a ladder was caulking underneath eaves when the ladder slipped and the employee fell. The employee was approximately 12 to 14 feet from the lower level at the time.  The employee was hospitalized with a partially collapsed lung and fractured wrist.,1
"On or about 3/24/16, an employee slipped/tripped while stepping over a 2-foot-high masonry wall.  He was hospitalized with three fractured ribs and a punctured lung.",1
"An employee was changing the air line on a three-station pneumatic press. Her finger was in a porthole on the equipment when she connected the air line to the machine. The air caused a piston in the machine to be actuated while her finger was in the hole, amputating her right pinky finger between the first and second knuckle.",0
An employee was wrapping some windows on a stretch wrapper machine when the windows fell over onto his right arm/shoulder. He was hospitalized.,1
"A front-end loader bucket on an articulated wheel loader was transferring tools to another part of the work site. The operator of the wheel loader inadvertently released the end loader, which fell on top of and broke an employee's left foot. He was hospitalized for surgery.",1
"An employee operating a reach truck collided with a stand-up fork truck, suffering a left foot injury.",1
"An employee was pressure washing the pool when he ran out of gasoline. While he was adding gasoline to the pressure washer, it ignited, causing first and second degree burns to 50 percent of the employee's body. He was hospitalized.",1
"An employee was driving a tractor that was connected to a feed wagon. He went over a bump that caused the drawbar mechanism to break. In turn, the cables connected to the hydraulics became dislodged, and the lever hit him on the top of the nose/center forehead. He suffered a small laceration that required stitches.",1
"On 3/24/16, at around 2:00 PM, an employee amputated an index fingertip while operating a punch press with pull-back devices.",0
An employee was working inside a meat freezer when he struck his head. He was hospitalized with internal bleeding.,1
"An employee was working on a brake assembly by installing a pin into the manual brake lever, from the bottom side underneath the railcar, when a fellow employee performed a brake test. The employee's finger was caught in the manual brake assembly resulting in injury and possible amputation.",0
"While retrieving something from a toolbox in the bed of a pickup, an employee slipped and broke a leg.",1
"On March 24, 2016, an employee was helping a warehouse worker pull an order when a stack of insulation products fell and struck the employee, fracturing the left fibula.",1
An employee slipped in the icy parking lot while walking into work. She was hospitalized with an ankle tendon tear.,1
"An employee's foot hit the down button on a scissor lift table, causing the lift to break the employee's left femur.",1
"An employee was repairing a leak on a roof when he fell 45 feet to the ground, injuring his torso and pelvis and requiring hospitalization.",1
"An employee was pulling a crate of produce out of a truck using a manual pallet jack when he lost his grip and fell backward, striking the floor of the truck and injuring the back of his head. He was hospitalized.",1
"An employee was cleaning up an area by sweeping and removing sand from the summit when the machine cycled, pinning his left hand between the summit and the transfer car he was using to put the sand in. He suffered multiple fractures and lacerations to his left-hand thumb, ring, and pinky fingers. The machine was not locked out/tagged out at the time of the incident.",1
"An employee was walking to the grossing station in the laboratory when she slipped and fell, fracturing her left leg. She required surgery.",1
"An employee was changing the light bulb beneath the diving board in a drained swimming pool. The employee then slipped along the sloping wall and fell onto a cinder block located on the bottom of the pool, suffering a possible broken hip.",1
"While cutting aluminum on a saw, an employee sustained a right middle finger amputation.",0
"An employee was trying to cage a brake chamber with a caging bolt. The caging bolt was too short, so the employee applied shop air to the chamber to connect the bolt. As the employee was installing a fitting on the chamber to connect it to the air hose coupling, the employee's left middle finger was caught and crushed between the chamber and bolt washer.",1
The employee was over head structure welding from a scissor lift at the height of approximately 18 feet. His head became caught between the scissor lift railing and the structure.,1
An employee was flung from a man lift and suffered a concussion. He was hospitalized.,1
"Two employees were moving a welding positioner into place using an overhead crane. One was handling the base of the positioner as the other was operating the crane. The employee with his hands near the base moved his hand under the positioner as it was lowered, and his left index finger was smashed and partially amputated between the base and the ground.",0
"An employee was putting parts on the trolley conveyor in the sequencing area when his fingers were caught in a chain and sprocket, amputating his right ring and pinky fingers at the second knuckle.",1
"An employee was stepping off an A-frame type ladder. As he placed his weight on his back foot, he slipped and lost his balance. He fell backward and landed on top of an elevated welded pipe gas line, breaking three ribs and suffering a slightly collapsed lung on his right side.",1
"An employee was working on a skid steer with the unsecured cab tilted back. While he was working, the cab fell onto the employee resulting in broken ribs and vertebrae.",1
The injured employee was lifting an oversized package that weighed approximately 98 lbs. with another employee. When the employee lowered the package his finger was severed by a piece of metal on the package.,0
"An employee was webbing the paper through the printing press perf and anvil cylinder.  The employee indexed the cylinders while holding the lead edge of the paper in the gap which drew the finger in, pinching it between two cylinders.  The employee's right index finger was amputated.",0
"An employee was manually feeding 2x4 wood members into a saw when wood cutoffs began interfering with the machine's operation. While attempting to rearrange the wood cutoff debris, his left hand contacted the rotating 10-inch sawblade, amputating one finger and injuring two others.",0
"An employee was helping to move a generator with fold-out handles off the back of a truck. His index finger was caught in the pinch point between the handle and frame of the generator, amputating the distal end of his finger. He was wearing gloves at the time.",0
"An employee was clearing the inside of a vacuum hose of accumulated debris that was interfering with the suction force. Once the employee cleared the vacuum hose, the suction force grasped the employee's right arm. The employee's right arm and hand were injured.",1
An employee was opening small packages with scissors when her left index fingertip was amputated (no bone loss).,0
An employee fell and was injured while performing work.,1
"An employee was performing maintenance on a CNC waterjet cutting machine by replacing the high pressure line. When he was testing the pressurized line, the fitting failed or broke causing the water to be released at a very high rate. It struck the employee in the chest and exited his back. The employee was standing approximately 15 ft. away from the machine.",1
"An employee was riding a pallet jack from a chill area to a dry area and was waiting for others to pass through the doorway area. 
The automatic door cycled and came down on the employee, breaking his arm.",1
An employee was attempting to remove material out of a saw when the sawblade cut the employee's pinky and ring fingers.,1
A piece of metal framing fell off a cart and struck an employee in the face.,1
"An employee got out of an elevated bucket to perform work (he was wearing a fall protection arrest system). When the employee got back into the bucket, he put his hand on the top railing of the bucket. When all of his weight transferred into the bucket, the bucket bounced a bit and his left ring finger was pinched between the railing and the wire tray of the bucket, amputating his fingertip.",0
"An employee was hooking up a trailer to a customer vehicle. The employee tried to step over the tongue of the trailer and tripped, landing on his left side and fracturing his left hip.",1
"An employee had just finished loading his trailer. While closing the rear trailer door, his finger was caught between the door panels, amputating his right index fingertip.",0
"While core drilling on a second floor balcony, an employee was struck by the drill and fell 12 feet to the concrete floor below, suffering broken arms.",1
An employee stepped out the passenger side of a garbage truck and slipped and fell on the wet brick road. He fractured his right foot and was hospitalized.,1
"An employee was removing a fiberglass ring on a 70'' (5ft 8.33in) platform ladder with a coworker on a fixed ladder. The platform ladder tipped over, and the employee fell and broke his right femur.",1
An employee was operating an asphalt machine when the machine caught fire. He attempted to turn it off and received burns on his face and arms.,1
"On March 25, 2016, an employee was moving a casting with a magnet when the magnet was turned off and the casting fell onto the employee's right foot resulting in amputation of the toes on the right foot.",0
"An employee was making her rounds and slipped and fell on the floor. The employee was admitted to the hospital for treatment. The employee sustained multiple injuries including a bruised left knee, a hairline fracture to the right knee, a displaced fracture to the left rib, a fracture to the left wrist and an impact fracture to the neck and left shoulder.",1
"On 03/26/2016, at 6:00 p.m., an employee exited a semi-truck and trailer and was providing backing directions to a driver who was reversing a second semi-truck and trailer. The driver did not see the stop signal and continued backing the truck into the injured employee's truck and trailer. The employee's right arm was caught between the two trailers. The employee was hospitalized with a broken right arm.",1
"An employee was installing siding on a house and stepped from one side of a scaffold to the edge of a 2 x 12 platform on another scaffold. He lost his balance and fell on his back, and the platform then landed on his face. He suffered a laceration above his left eyebrow and a back injury.",1
An employee was changing sandpaper on a buffer machine when his hand slipped and was cut by the machine. He was hospitalized and received stitches.,1
"An employee was stepping over APC units when she tripped and fell to the floor, fracturing her right hip.",1
"While climbing down a ladder, an employee fell, hit his head against the bottom of a shelf, and had a seizure. He suffered a laceration to the back of his head.",1
"An employee was opening a valve to obtain a sample of hot rosin for testing when the rosin splashed toward the right side of his face and ear, causing second degree burns. He was hospitalized.",1
"An employee slipped and fell on wet grass while delivering a package, breaking her ankle in two places and requiring surgery.",1
"An employee was attempting to replace the permeate port on the end-cap of a reverse osmosis vessel. The equipment retained pressure, which caused the end-cap to be forcibly removed. The pressurized end cap struck the employee's right hand against a support member, amputating two fingers.",0
"An aircraft mechanic was working with other mechanics on an MD88 aircraft bin.  The injured employee attempted to use the golf cart to step up into the bin, when his foot slipped and hit the pedal of the electric golf cart causing the golf cart to move forward pinning the employee between the golf cart and the aircraft. The employee suffered two fractured ribs, a fractured T9 vertebrae and had blood in the lungs.",1
"An employee was unloading a trailer. When he reached the dock plate, the wheels of his pallet jack hit the dock plate and became stuck, causing him to fall off the jack to the concrete floor. He suffered a brain injury.",1
An employee was walking through the parking lot and tripped over a curb at the crosswalk. The employee broke their left arm.,1
An employee's left index finger was cut when handling a bungee cord. The finger became infected and required hospitalization.,1
An employee fell out of a tree onto a lower level.,1
"While diagnosing a vacuum system, an employee removed an exhaust filter to access a vacuum port with his right thumb. The ball valve actuated while his thumb was in the port, amputating his thumb tip.",0
"An employee was troubleshooting a broken valve when the valve opened, causing a wrist fracture. The employee was hospitalized for surgery.",1
"An employee stepped into an improperly covered hole and fell (approximately 3 feet), breaking his right arm.",1
"An employee was performing preventive maintenance on a pocket feeder and was manually lifting a section of the machine when it shifted, pinching and partially amputating his right pinky finger between two sections.",0
An employee was repairing a debarker machine. The arm of the machine was loosened and fell on the employee's hand fracturing a finger and injuring a tendon that required surgery to repair.,1
An employee partially amputated her middle and ring fingers while operating the CVP bagging machine.,1
"While closing a lift gate on a trailer, an employee's gloved finger was caught between the gate and the trailer doorframe, partially amputating the left middle finger.",0
"An employee's hand was on the edge of a gang box when a coworker closed the box on the employee's finger, partially amputating it.",1
"As an employee climbed a client's rodeo gate inside an arena, the gate collapsed. The employee fell  to the ground, and the gate fell on top of him, breaking his back.",1
"An employee was assembling a fire-rated door. When the employee removed the shipping clamp on the unit, the door opened and hit him in the chin. He fell backward and when he got up, a large amount of blood was oozing out of his mouth. He was hospitalized with a laceration to the chin/mouth.",1
"An employee was changing out the cutter head when the cutter head activated, partially amputating the employee's index finger.",0
"An employee was working in a scissor lift with a grinder. While grinding on the conveyor, the employee lost control of the grinder, which lacerated the employee's right forearm.",1
An employee's right middle finger was caught by a door that was being repaired. The employee lost part of his fingertip.,1
An employee was connecting a fifth wheel trailer hitch when the trailer came down and crushed his right thumb. His thumb was partially amputated and required surgery.,1
"On March 28, 2016, an employee felt faint and dizzy and blacked out. When the employee came to, the right ring finger was caught between the conveyor and the guide bar. The employee's right ring fingertip was amputated.",0
"On March 28, 2016, at approximately 11:20 p.m., an employee exited his excavator and peered into the bin where he was placing additives. Wearing metatarsal gloves, the employee placed his left hand on the side of the bin. A piece of metal, used as a trough, was not secure and slid against his hand, amputating his left pinky finger down to the knuckle.",0
"An employee fell 20 feet to the floor while installing audiovisual equipment to structural steel, breaking an arm and elbow.",1
"An employee fell from the roof to the ground while installing rubber membrane roofing, breaking the right hand and fracturing the right hip.",1
"An employee was struck by a passing lift truck while sweeping and cleaning the material handling area, sustaining a fractured right leg.",1
An employee was hospitalized after falling into a stairwell while installing insulation in a new residential building.,1
An employee was securing a lift hook to a table on a jib crane when the employee's right thumb tip was crushed/amputated between the hook and lift table.,0
"An employee was dumping product onto the auger that takes meat to the slicing machine. When he reached down, his right index fingertip was amputated by the auger.",0
"An employee was climbing a ladder to gain access to the top of a railcar for inspection. The employee lost their grip and fell to the ground, injuring their back and right hand and requiring hospitalization.",1
"An employee was standing on a drill rig and stepped on the flight of an auger to pull the swing radius barricade tape into position. The auger tilted over and hit the employee's hand, which was positioned on the counterweight of the drill rig. The employee's left index finger was lacerated and fractured.",1
"An employee was clearing out residual materials on a screw auger when his finger contacted the screw component that was turning inside the auger, amputating one-third to one-half of his right middle finger and severely cutting his right index fingertip.",1
"An employee was operating a power platform stake bed truck to unload production equipment. The employee's left index finger became caught on the equipment, amputating the fingertip at the first knuckle.",0
"An employee was delivering a caustic truckload at a client's site. The hose was disconnected under residual pressure, and it hit the employee's helmet, displacing the face shield and spilling caustic solution on the face, mouth, and neck areas. The employee suffered chemical burns.",1
"An employee was loading a truck at the dock when an empty metal plant cart fell onto the employee's right leg, breaking the right ankle.",1
An employee left work and was admitted to the hospital for asthma issues.,1
An employee was loading the wooden scaffold system into the truck and got a splinter. The employee removed the splinter. The wound became infected and the employee was hospitalized for treatment.,1
An employee was attempting to remove the lock actuating pin and the lock bar shifted severing his left index fingertip.,0
An employee working on a concrete form slipped and fell on top of a bolt. The employee reinjured a stomach hernia and was hospitalized.,1
Employees were taking down a scaffold and the scaffold collapsed. An employee suffered a broken left ankle and wrist and a fractured right knee.,1
"Employees were about to take samples of hot sugar cane juice as the machine was processing the sugar cane. An air bubble inside the line caused the line to burp, and 200-degree hot sugar cane juice inside the line splattered onto the employees. 
Two employees sustained first and second degree burns.",1
An employee fell and hit the left side of his head and face on the concrete floor.,1
"An employee was transporting a sample container containing phenol from a microwave to a lab fume hood. The septum on the cap of the container unexpectedly burst, spraying a mist of the content into the employee's face and causing first degree facial burns. The employee's eyes were protected at the time of the incident.",1
" On or about March 29, 2016, an employee was cutting paper tags with a manual paper/cardboard cutter when the blade came down and amputated the employee's right index fingertip.",0
An employee was performing maintenance on a machine when a finger contacted the belt and pulley resulting in a fingertip amputation with bone loss.,1
"While cleaning a buildup of dough from the conveyor roller, an employee's left hand was caught between the roller and the conveyor belt. The employee sustained left-hand injuries and a left forearm laceration that required surgery.",1
"An employee lost balance and fell sideways to the concrete floor, breaking the left leg.",1
"While scraping out the hopper inside a mixer/dough divider, an employee's left-hand fingertip was caught and amputated by a shear point. The divider was operating at the time of the incident.",0
An employee slipped and fell while taking inventory.,1
An employee was diving for 63 minutes at a depth of 37 feet when he felt ill. He surfaced and showed signs of carbon monoxide poisoning from a breathing air compressor.,1
"An employee was pushing one cart and pulling another. The first cart stopped, but the second continued rolling, pinning and breaking the employee's arm.",1
"An employee was walking down a hallway when 1,200 pounds of stacked drywall fell on him and broke his ankle.",1
"An employee was torch cutting anchor bolts from the anchor plate of a stand-alone jib crane. As the employee cut the last of the anchor bolts, the approximately 10-foot-high round column with a 10-foot-long jib fell over onto a second employee standing nearby. The second employee was hospitalized with a fractured lower leg and lacerations to the back, neck, forehead, and leg.",1
"While walking through the parking lot, an employee was struck by a coworker's vehicle, fracturing the employee's right leg.",1
"An employee was building a window, finished her portion of the assembly, and pushed the window down the production line to the next employee. When the next employee pulled the window toward them, it caused the window to close, catching and cutting the first employee's right ring finger in the window.",0
"An employee was packing equipment to move to another jobsite when a pendant, weighing approximately 40 pounds, fell on his hand and crushed his right index fingertip. The finger was medically amputated just below the fingernail.",0
An employee was helping to work on an electrical panel when the panel arc flashed. The employee suffered burns over 65% of his body and was hospitalized.,1
"An employee was using a knife to make a cut on a chicken when the knife slipped out of his hand. He was stabbed in the stomach while trying to grab the knife, requiring surgery.",1
"An employee was lifting a part with her left hand when the part slipped and struck her right hand, amputating the first right-hand fingertip.",0
"An employee cleaning out roof gutters in an aerial lift contacted the overhead powerlines, receiving second and third degree burns to his hands.",1
"An employee fell 5 to 6 feet from a stepladder while working on a light fixture, suffering a fractured pelvis and head bleeding.",1
Employees were measuring the receiving dock bay door area for a replacement dock plate. The dock plate springs opened quickly and the dock plate caught the injured employee's fingers in a pinch point between the dock plate and the dock bay door surface resulting in the amputation of the right middle and index fingertips.,0
"An employee was operating the end boring machine, drilling holes for dials. The employee's finger got caught under the clamp when the clamps came down resulting in the amputation of the left middle fingertip.",0
An employee assigned to load trucks and operate stand forklifts suffered a shattered and broken left tibia when he struck a structural beam.,1
An employee's right hand was amputated while cleaning a meat grinder. The machine was in operation at the time of the incident.,1
"At approximately 2:00 p.m., on 3/30/16, an employee was climbing down from a one-story roof using a metal extension ladder. The ladder collapsed, and the employee fell approximately 10 feet to the ground. He was hospitalized with two cracked right-side ribs and four cracked vertebrae.",1
An employee was checking the quality of a roll of product with his hand when his hand became caught and his arm was dragged into the roll. His left arm broke and required hospitalization.,1
"An employee heard the cap fall off of a chemical system flow line to a holding tank containing ammonia. The employee went to the area to close the valve and was overcome by ammonia fumes, suffering a respiratory injury.",1
An employee was looking under a cooling silo when his backside hit a switch that activated the knife gate. The knife gate amputated his left fore fingertip and middle fingertip. The knife gate was not locked out/tagged out at the time.,1
"An employee was attempting to set down an excavator attachment that was being lifted with an overhead crane when the attachment came loose and rolled onto the employee's foot, crushing it. The foot had to be amputated.",1
An employee was walking across a resident's driveway while delivering mail when the resident backed up a vehicle and struck the employee. The employee was knocked unconscious and hospitalized with a head injury.,1
An employee was using a screwdriver to clean the dirt from the nose of the fuse. This caused the fuse to detonate and the back end of the fuse punctured his hand.,1
An employee slipped and fell from a ladder while handling cattle feed. He broke his arm while attempting to break his fall.,1
"An employee was changing out a mold on a machine when the safety device processor card failed, dropping the mold on the employee's finger. The employee was hospitalized with a broken index finger and hairline fracture to the middle finger, requiring surgery.",1
An employee was picking up blocks on the ground behind a forklift. The forklift operator struck the employee while backing up. The employee sustained an ankle bone fracture and was hospitalized.,1
An employee was setting up a lift with a beam clamp on a beam with a chain attached. The clamp had a hammerlock that connected the chain and beam lock. The employee's left index finger was between the chain and hammerlock when he hoisted the load. His left index finger was pinched and amputated between the hammerlock and chain when the chain tightened.,0
"An employee was using a homogenizer to make emulsified sulfur when the employee's finger was caught between the plunger and cooling line, lacerating the fingertip and requiring sutures.",1
"An employee was setting up a deep hole drilling machine (honing machine) when the oil pressure head disengaged. The head struck the employee's right hand, amputating his right thumb and right index finger. He was hospitalized.",0
"An employee was lifting a steel diamond plate cover off a lagoon pit when the cover slipped out of his hand and fell on his foot. He slipped and fell, breaking his right hip. He was hospitalized.",1
"On March 30, 2016, at approximately 11:00 a.m., an employee was working from a 12-foot fiberglass step ladder, preparing to relocate a 2-inch vent line from a receiver tank. Steam and hot water came out of the vent, causing the employee to lean back, lose balance, and fall to the concrete floor below. The employee suffered a right hip fracture, multiple right rib fractures, and a right forearm laceration, requiring hospitalization. An energy control procedure was not used at the time of the incident.",1
An employee fractured two fingers on the right hand when his hand was caught between two molds while operating a mold press.,1
"On 3/30/16, at approximately 10:00pm, an employee crushed his left hand index and middle fingers between the dies of a hydraulic brake press while forming a metal part.  The tip of his index finger was medically amputated.",0
"An employee was in the process of loading a gang bar onto a paint rack in the shop using an overhead crane rigged with a magnet. The gang bar was placed on the rack out of position. The employee released the lifting device and attempted to reposition the gang bar without the lifting device. In the process of repositioning the gang bar, one end came out of the rack and fell pinching the employee's fingertip between the gang bar and the rack resulting in a right middle fingertip amputation.",0
Two employees were performing maintenance on the Schlatter machine (high speed machine that produces wire shelving). One of the employees suffered the amputation of the left index fingertip.,0
An employee felt severe pain in his left knee while detailing a car.,1
An employee was releasing a pallet that had become jammed on the infeed.  He lost his balance and fell approximately four feet between the infeed and the outfeed onto a metal support injuring his back.,1
An employee was repairing equipment. The equipment was not locked out. The reciprocator arm contacted the employee's right arm resulting in a laceration that severed an artery requiring surgery.,1
An employee tripped over a board left on the floor to cover newly installed tile flooring.  The employee fell and injured their back resulting in hospitalization.,1
"On 03/30/2016, at approximately 9:30am, an employee was standing in a hallway. Another employee was driving a forklift that was carrying a large metal coil weighing 3,265 lbs. The coil slipped off the forklift and fell onto the employee's right foot, crushing it.",1
An employee was using a drill when the glove was caught in the machine resulting in a pinky finger amputation.,0
"On 3/31/16, an employee walking in the hall stepped in a water puddle and slipped and fell to the floor, fracturing her left arm.",1
An employee was hospitalized after sustaining a shoulder injury.,1
"An employee tripped on a carpet in the hallway and fell, breaking her leg.",1
"An employee was on an 8-foot step ladder installing fire caulking. The employee tried to re-position, lost his balance, and fell. He was hospitalized overnight with a possible broken pelvis.",1
"Two employees had an altercation and one employee struck the other employee with his respirator knocking him out.  The injured employee fell to the ground and was hospitalized with fractures to the forehead, nose, and left wrist.",1
"On March 31, 2016, at 12:00PM, an employee tripped on an electrical extension cord and fell.",1
"On March 31, 2016, an employee experienced the amputation of the left middle fingertip when it was caught between a conveyor belt and a pallet. The employee was hospitalized for surgery.",1
"On or about March 31, 2016, at 9:00 a.m., an employee in the meat department suffered a fingertip amputation while cutting meat on a band saw.",0
An employee was mowing grass. He was startled by lightening and when he dismounted the riding mowing his leg was struck by the mower attachment.,1
"An employee drove a forklift with a bundle of wire (4500 lbs.) on the forks to the door of an intermodal container and parked it. The employee got off the forklift and went inside the intermodal container to adjust dunnage. As the employee was adjusting dunnage the bundle of wire stationed on the forks of the forklift fell and pinned the employee between a wire bundle inside the container and the wire bundle that fell from the forklift. The employee sustained a fractured sternum, a fractured rib, and a fractured right forearm.",1
"Two employees were using a pressure washer (8500 PSI) to remove paint lines from concrete.  One of the employees accidently swept the discharging water across the other employee's foot. The injured employee suffered lacerations, tendon damage, and a chipped bone on the foot.",1
The employee was placing a concrete blanket over the newly poured concrete. The wind picked up the blanket causing the employee to fall and break his left leg.,1
An employee was walking and struck a stationary piece of equipment causing her to stumble and twist resulting in a spiral fracture to the left hip.,1
An employee fell 12 feet off a ladder resulting in a head injury.,1
An employee fell approximately 10 feet from an A frame aluminum ladder while removing gas line pipe or tubing in the middle warehouse. The employee suffered broken ribs and a punctured lung.,1
An employee was standing between the inner core and outer jacket of a precast concrete form. The employee was struck by the outer jacket resulting in a broken leg.,1
An employee was cleaning oil off the pneumatic stapler gun and a staple penetrated the employee's right hand.,1
An employee fell from a rack and fractured his hip and ankle. He also received a concussion and a shoulder strain resulting in a hospitalization.,1
"An employee was removing a pump from a truck using a forklift. Another employee was removing the last bolt from the pump on the back of the truck, when the forks of the forklift struck that employee in the back of the right leg resulting in a laceration.",1
An employee was hand grinding a flat piece of metal that was held in place by a vice. The piece of metal slipped out of the vice striking the employee and cutting the right side of his neck.,1
An employee was lifting steel bar stocks 12 feet long and weighing approximately 20lbs to place into a CNC mill machine when he felt a pull across his stomach. The employee was later admitted to the hospital for pain in the stomach.,1
"On 3/31/16, at 1:45pm an employee was making large cans on a roll bender machine when the rollers pulled his left hand into the machine causing a crushing injury to the employee's hand that required hospitalization.",1
The employee was riding on a paint striping machine. The machine was struck by a vehicle causing the hot thermo plastic paint to splash onto the employee burning both arms and the employee's face.,1
Two employees were managing two 500 lb. steel plates with an overhead crane. One of the steel plates fell crushing an employee's right hand between the two pieces of steel.  The injured employee was hospitalized and three fingers were amputated.,1
"On 03/31/2016, at approximately 4:00 pm, an employee tripped on a tarp and fell while loading/unloading material. The employee suffered a fracture of the right femur.",1
"An employee was traveling eastbound on Dock #1 when the reach truck he was operating lost power, causing the reach truck to strike a parked pallet jack fracturing the employee's left foot.",1
An employee was changing out a tire on a tractor trailer when the tire blew up and knocked the employee to the ground causing a head injury and thigh contusions.,1
An employee was climbing an extension ladder when he lost his balance and fell to the ground hitting his head. The employee required in patient hospitalization for treatment.,1
"On March 31, 2016, an employee injured both hands while hand-feeding a printer/slotter for corrugated cardboard.  The employee was hospitalized with fractures and lacerations on both hands.",1
An employee was disassembling a crane boom and slipped off the boom falling three feet ten inches and fracturing the lower left leg.,1
"The employee was walking down the incline of a bayou on uneven terrain at the jobsite. The employee slipped, tripped, and fell to the ground fracturing his right leg.",1
"An employee was working with a crew to remove a tree branch from a cable wire on a pole that fell down during a storm. A crew member was cutting a branch to free it from the communications line when it hit an adjacent branch, which then fell onto the employee's back and pinned him to the ground. He fractured his rib and punctured his lung.",1
"An employee was removing whalers of gang form. While positioned on the form, he removed one nut, and the form slid backwards. He was still connected to the form when the form detached from the concrete wall and fell. He fell 8 feet 6 inches with the form to the ground, dislocating his hip and breaking his pelvis. He was hospitalized.",1
An employee was lifting and emptying trash cans when he experienced stomach pains. He was hospitalized with a hernia and required surgery.,1
"While clearing a chemical hose line, an employee was sprayed/splashed with concentrated sulfuric acid. He suffered chemical burns on his left thigh.",1
"On or about April 1, 2016, at approximately 10:10 p.m., an employee was walking from the receiving desk at the shipping dock when a forklift driver struck him. His left leg was amputated below the knee.",0
"An employee was unloading logs from a log trailer. The employee stepped on a ladder to climb down when the ladder disconnected, causing the employee to fall and suffer contusions to the back and right shoulder.",1
"An employee was hand stacking product on a skid. The employee walked around the skid and tripped on the shrink wrap, falling to the floor and fracturing the right hip.",1
"An employee was operating a machine when a coworker tipped over a cart. A mold fell from the cart and struck the employee, breaking the employee's lower leg and foot.",1
"An employee welding material on a welding table hung his lead line in a hole in the table. When he turned to walk away, he tripped over the lead line and fell to the floor, breaking his hip. He was hospitalized.",1
"While climbing a 17-foot fixed ladder, an employee lost grip of the ladder and fell approximately 10 feet to the surface below. The employee suffered a fractured left ankle and elbow, requiring surgery and hospitalization.",1
An employee was guiding a car into the tire and lube bay while a coworker drove it. The coworker's foot slipped off of the brake and engaged the accelerator. The vehicle struck the injured employee and pushed him into a tire machine and the wall. He sustained a puncture wound above his knee and fractured his leg.,1
An employee was working under the hood of a truck when the hood fell and dislocated a shelf on the wall. The shelf struck and punctured the employee's lower back.,1
"An employee was placing a piece of lumber under a bundle of steel that was being moved by an overhead crane. The bundle slipped off the chain and fell on his right hand, amputating his middle finger.",1
"An employee was checking the operation of the concrete mixer after the belts were replaced and the pulleys were realigned. The employee's right middle finger was caught between the mixer's belt and pulley, partially amputating the right middle fingertip.",0
An employee's finger was amputated.,1
"An employee was attempting to refuel a tack buggy when a flame from a nearby rosebud torch ignited the fuel or vapors. The employee was exposed to the flame, burning him on his left arm, hand, and abdomen.",1
"An employee was inside an intermodal container positioned to the right of granite slabs that were stacked in an A-frame manner. As a forklift was unloading the slabs from the left side of the A-frame, the slabs on the right side fell and struck the employee. The employee was pinned between 7 to 8 slabs and the side of the container. The slabs weigh approximately 700 pounds each. The employee sustained bruised ribs and lungs.",1
"An employee was cleaning wet lap from a machine when his right hand came in contact with the machine's blade, amputating four of his fingers. His index finger was reattached. The machine was not locked out at the time of the incident.",1
An employee was adjusting plug tints/caps on an automatic installer machine when the machine's installing head cycled and amputated the employee's left middle fingertip.,0
"On 04/01/2016, an employee was hospitalized due to lacerating his left forearm. The employee was using a pocket knife to cut a hard plastic banding off of stacks of boxes when the banding sprung and caused the knife to lacerate his left radial artery. The employee required surgery.",1
"While operating the strander machine in normal operating mode, an employee's clothes became entangled in the rotating parts of the machine. The employee was dragged into the machine, suffering head lacerations and breaking the right and left femur, right tibia and fibula, and four ribs.",1
"While using a water hose to wash down a piece of equipment, an employee contacted the equipment and amputated the left thumb.",0
"An employee was working from a 6-foot step ladder while using a screw gun to install a panel cover. He lost his footing, knocked the ladder from beneath himself, and fell to the ground, landing on top of the ladder. He suffered a head laceration and wrist injury, requiring hospitalization.",1
"An employee was laying on her back while installing a chain on the sprocket of an egg packer. While she was jogging the machine, her towel became caught. When she attempted to grab the towel, her right middle fingertip was amputated.",0
"An employee attempted to move an electric pallet jack from the battery room. As he turned the pallet jack, his left thumb was caught between the pallet jack handle and a metal concrete pillar. He suffered a compound fracture his left hand, requiring surgery.",1
An employee was stacking weights when a weight fell on and partially amputated his finger.,0
"An employee was working on a modular unit approximately 4 feet from the ground. While walking to retrieve a tool, the employee stepped into an unguarded opening and fell 3 feet, suffering a fractured rib and pelvis.",1
"A truck jockey operator was pulling in near the office ramp where another employee was sitting to deliver papers to the office. The operator hit the brakes on the truck, but the truck did not stop. The truck pinned the employee between the truck and the wall, causing right arm, upper and lower back, and stomach injuries.",1
An employee was blowing down a bagger product feed conveyor with an air hose when his right hand became entangled in the chain drive. His right index finger was amputated with fractures to the remaining three fingers.,1
"As an employee was exiting his vehicle, he stepped on a bottle that was hidden inside a bag. He tripped and fell to the ground, fracturing his right wrist and suffering back pain.",1
An employee was coming down from a shoring scaffold that he was erecting when he lost his footing and fell 10.5 feet to the ground. He was hospitalized with a fractured back.,1
"An employee was driving an electric pallet jack down an incline when his left leg was pinned into a guardrail, fracturing his left femur.",1
"An employee was cutting out bricks as part of demolition activities when several courses of brick slid down a steel beam and struck his hand, lacerating and fracturing it.",1
An employee was packing product into boxes. She grabbed a piece of packing tape hanging from the conveyor for the box line printer. Her arm was fractured when it was pulled between the roller and the belt.,1
An employee was backing a stand-behind forklift into the charging station when his left foot was caught between a guide post and the forklift. He was hospitalized with a crushed foot.,1
"On or about 4/2/16, an employee was unloading a utility pole from a truck when the pole rolled and struck his right leg below the knee, causing a compound fracture. He was hospitalized for surgery.",1
"An employee had an allergic reaction to a patient's anti-fungal foot cream. The employee developed a rash and experienced breathing problems, requiring hospitalization.",1
An employee walked out to the parking lot to retrieve an unstable patient. The patient decided to leave the hospital and walked out to get in their car. The employee followed the patient. The patient started the car with the door open. The employee attempted to talk the patient into coming back into the hospital for care. The patient became agitated and reversed the car. The employee was caught by the open door and slammed into the ground. The patient then put the car in drive and ran over the employee. The employee was hospitalized with a broken nose and chest injuries and required stitches to the face.,1
An employee slipped and fell while walking to a restroom at the exterior of the store. The employee suffered a broken leg and was hospitalized for treatment.,1
"An employee fell approximately 18 feet to a concrete driveway from a ladder while installing cable television line from a pole to a home, suffering fractures and soft tissue damage to the feet and ankles.",1
"An employee entered a bag holder to access a bag placer carriage and monorail where a bag had fallen. While the employee was kneeling below the monorail to pick up the bag, the bag placer carriage engaged, pinching the employee's head between the carriage and monorail. The employee suffered head lacerations that required sutures, as well as contusions on both sides of the head and nose.",1
An employee was climbing down an A frame ladder when the ladder collapsed. The employee suffered two broken ribs.,1
"An employee delivering food fell from the lift gate of the delivery truck to the ground, breaking a leg.",1
"While operating a divider, an employee's hand entered the guillotine, amputating the right-hand fingertip.",1
"An employee was cleaning a food cart in the back storage part of the store. A forklift operator on the other side of the storage rack was pushing a skid with a cooler but pushed it too far, causing a pallet (weighing approximately 100 pounds) on the other side of the rack to fall on the employee cleaning her cart. She was hospitalized with injuries to her mouth, chest, legs, and feet.",1
"An employee was using a snowmobile to take an empty patient sled up the mountain when the employee crashed into a permanent snow fence, breaking bones and puncturing the aorta.",1
"An employee was detailing a boat. While trying to remove plastic, she fell approximately 6 feet from the boat to the ground, breaking her collarbone, cracking her rib, and injuring her head.",1
"An employee was working near mail transporting equipment when the web on the machine became caught on the employee's right leg, causing a bone fracture.",1
An employee was using a pneumatic torque wrench when the locking mechanism pinched his right ring finger. Part of his finger had to be surgically amputated.,0
An employee was clearing a line vessel when a hose came loose and struck the employee's left arm. The employee was hospitalized with a left bicep tear requiring surgery.,1
"On or about April 3, 2016, an employee was operating a water lance to clean a fixed pipe when he made contact with pressurized water, lacerating his left thumb.",1
"While an employee was operating the clothes sorting machine, a garment was inserted incorrectly. When the employee tried to pull the garment back out of the machine, the employee received a static electricity shock and experienced chest and right arm pain.",1
"An employee fell while delivering clean linen at a customer's location, suffering a concussion and back, shoulder, and hand pain.",1
"An employee had been working on stripping and waxing the floor when the floor buffer machine made a loud noise. The employee bent over to make an adjustment to the machine and fell on the floor, fracturing the left leg.",1
"While servicing a hydraulic press, an employee entered the space between the light curtain and the machine. The machine cycled, trapping the employee between the mandrill and casting. He suffered a broken femur, broken hip, and punctured bladder.",1
An employee was helping to lower an aircraft hose hoist when he tripped on a cart tongue that connects two engine cowling carts. He fractured his right elbow in two places.,1
An employee fell 5 feet off scaffolding and fractured the left wrist. The employee was hospitalized for surgery.,1
An employee sustained a broken arm after slipping and falling on a wet surface on the floor.,1
An employee was unjamming candy on the forming line when his glove was caught by the rollers and his right hand was pulled into the machine. He was hospitalized after receiving a deep laceration on the webbing of his right hand between his index and middle fingers.,1
"An employee climbed a ladder to install a buss over an energized circuit. The buss slipped from the employee's hand and made contact with an energized circuit. An arc flash occurred and the employee's hands, face and chest were burned.",1
An employee was working in the GI Lab cleaning equipment with Cidex-OPA Solution.  The employee had an asthma attack triggered by the cleansing solution and was admitted to the hospital.,1
"An employee fell while walking along a corridor, suffering a broken kneecap.",1
"On Monday, April 4, 2016, an employee was hospitalized with a crushing injury to his right leg.",1
"An employee was walking out of the office when a coworker punched him repeatedly, knocking him down. He suffered a fractured jaw requiring surgery.",1
"An employee slipped and fell from a flatbed trailer, suffering a broken hip.",1
"An employee was installing bridging from a scissor lift. He stepped out of the scissor lift and onto the bar joist and fell approximately 16 feet to the concrete below, suffering head trauma.",1
"An employee was testing a machine spindle when the spindle dropped, striking and fracturing the employee's leg. The spindle was not secure at the time of the incident.",1
"An employee was repairing a conveyor that was jammed with product. The employee's fingers were caught in the conveyor pulley when it started back up, amputating the pinky finger and fracturing the right ring finger.",0
"An employee was working on a car's coil spring when the spring came loose and a tool struck him in the face. The employee suffered a cut hand, a broken nose, and eye damage.",1
"An employee was using a vertical disc grinder to grind a small piece of metal while wearing gloves. His glove was caught on the disc, resulting in the amputation of his left index fingertip just above the tip of his nail.",0
An employee was walking at floor level next to a machine. The employee tripped over a 3-inch piece of round stock sticking out of the machine and fell to the floor. She fell on her right arm and broke several bones.,1
"An employee was cutting a piece of PVC piping with a chop saw. The blade kicked back and struck him in the chest, lacerating it.",1
"An employee was walking down the hallway when she slipped and fell, suffering a compound fracture to her arm.",1
"While working the boom lift, an employee was struck by a vehicle, suffering a broken knee and nose, bruised head, and injured foot. The employee was wearing a harness, but was not tied off at the time of the incident.",1
"A rig crew was attempting to pull a drill rig through the mud using a company-owned winch truck.  While doing so, the winch line separated, striking the injured employee. The employee was hospitalized with a lacerated arm and injured spleen.",1
"An employee was walking along the roof, conducting an inspection for roof replacement. The employee fell through the roof to the concrete floor, breaking ribs and a wrist.",1
"While spray painting a building, an employee went over a gate and walked off the ledge. The wind had blown a tarp over the area and covered the edge, which could not be seen. The employee fell approximately 50 feet, suffering broken ribs on the right side and a collapsed lung.",1
"An employee stepped off a forklift and was struck by the driver, causing a severe leg injury.",1
"An employee was performing maintenance on a D/C line when the line ruptured, creating a flash fire. The employee suffered first degree burns to the hands and face.",1
An employee suffered a partial amputation of the left middle finger while connecting a tow bar to a forklift's attachment. The employee's finger got pinched between the tow bar and the pintle hook on the attachment.,0
"An employee was attempting to drive a forklift off of a trailer bed when the forklift went off the side of the trailer bed and crushed the employee. The employee suffered six fractured ribs, a partially collapsed lung and a lacerated spleen.",1
Two employees were overcome by carbon monoxide fumes while troubleshooting a hot water heater. One of the employees was hospitalized overnight.,1
"An employee was using a shearer to cut a metal plate during prep work. A piece of the metal shear blade broke and hit him in the neck, causing a neck laceration.",1
"Employees were moving a stack of wear bands with an overhead crane. The wear bands fell over and struck an employee. He suffered a left shin laceration and left ankle fracture, as well as right leg laceration and right ankle injury.",1
"An employee was climbing up the ladder on the catwalk when he slipped and lost his grip, falling 5 feet to the concrete floor below. He broke his right lower leg and suffered an ankle injury.",1
"An employee was cleaning the oven. She sprayed degreaser and then put the oven in the self-cleaning cycle. When she opened the oven, she was exposed to the fumes inside and experienced lung irritation, requiring hospitalization.",1
"On or about April 5, 2016, an employee was guiding a die in a press when he attempted to remove a scrap. His right middle finger was caught between the die and die stop, amputating the fingertip.",0
"An employee was attempting to remove viscera (guts) with a tool from the machine. The tool he was using was caught in the evisceration machine, and his right ring finger was smashed between the tool and the machine, amputating his fingertip.",0
"An employee was working near a boring tunneling pit when he experienced dizziness and fell through railing, breaking his pelvis and two ribs.",1
"On or about April 5, 2016, at 4:00 p.m., an employee was  attempting to insert a plate into a shell core machine when his hand became caught in the machine, severely burning his left thumb and first and second fingers. He was hospitalized for treatment.",1
"While attempting to retrieve scrap steel from a horizontal band saw, an employee's third, fourth, and fifth left-hand digits were amputated.",1
"On or about April 5, 2016, at 1:00 p.m., an employee slipped and fell 6 to 8 feet from the fixed industrial ladder to the boiler's eighth elevation platform, suffering compound fractures to the tibia and fibula, as well as metatarsal fractures in both feet. He was hospitalized overnight for surgery.",1
"An employee's right ring finger was smashed while he was attempting to unjam a 6x6x18 timber from a machine roller bed, resulting in a finger amputation.",1
"An employee was performing flagging duties for traffic control while a company truck performed pole work. The employee was on the step of the truck when the truck moved. The employee fell onto the road, suffering a skull fracture and road rash.",1
"An employee was mopping the break room when he stepped into the water on the break room floor, slipped, and struck his head on the floor.",1
"An employee was using a band saw to cut scrap steel when the sawblade became stuck. As the employee attempted to release pressure in the blade area, the blade pulled his left-hand glove and index finger into the saw. His left index finger was amputated.",1
"An employee standing on a skid lifted on the forks of a forklift, fell 10-12 feet to the ground. The employee fractured the right shoulder and wrist and sustained a head laceration requiring stitches.",1
An employee was pushing a wheelchair to place it in the front lobby when he tripped and the wheel chair was pushed away from him. He fell on his left side and fractured his left shoulder and left hip.,1
"An employee was working in an elevated platform (cherry picker) that stopped working. A coworker came to rescue him, and as he stepped off one platform onto the other, he slipped and struck his head. He was working 10 feet above the lower level and was wearing a body harness and retractable lanyard at the time.",1
An employee suffered a shin burn when a fire occurred while he was re-fueling equipment in the horse barn.,1
"An employee's index finger was jammed between a door frame and the door as he was closing it, amputating his distal phalange.",0
An employee opened the trap door of a rotating floor on a restaurant to reach a guest's credit card when his leg was caught in the rotating floor mechanism. He suffered a leg fracture.,1
"An employee slipped on ice and fell on the sidewalk while walking into work, fracturing his leg.",1
"An employee exited the cab of a garbage truck. The truck was not in park at the time. When the employee attempted to re-enter the truck cab, the truck crashed into two cars and a building. The employee suffered bruises/contusions to the arms and legs, as well as a pelvic injury.",1
"While performing construction work on an apartment building, an employee's lanyard became tangled. While the employee was attempting to untangle the lanyard, a cantilevered portion of one truss contacted and pushed down another roof truss, causing the employee to lose his footing and fall to the ground. He suffered a broken pelvis, lacerated kidney, lacerated spleen, punctured lung, and broken rib.",1
"An employee tripped and fell in the deli and landed on a knee, requiring surgery.",1
An employee was using a drill press to drill a hole in a piece of metal when a metal bur contacted his glove and pulled his finger into the drill press. His finger was amputated.,0
"An employee was lowering a dock plate when it became stuck. As he used a pole to lift the dock plate, the plate became dislodged and fell on his foot, severely cutting one toe.",1
An employee was unloading dirt from a dump truck onto a dirt service road when the load shifted and the dump truck rolled onto its side. The employee sustained nerve damage to his left shoulder and left arm.,1
An employee was pushing a rolling cart of dishes into a wall-mounted dishwasher when his foot entered a pool of water heated to 180 degrees Fahrenheit. He suffered a second degree burn to his ankle.,1
An employee stood up in a forklift to reach through the mast and retrieve paperwork on the freight load. The employee had his arm extended through the mast of the forklift when the lever was hit and lowered the fork onto his arm. He suffered a severe right arm contusion with a large hematoma.,1
"An employee was trying to remove pepperoni that was jammed in the guard of a slicer. As he pulled out the pepperoni, his hand was caught in the slicer blade. His right hand index, middle, and ring fingers were amputated.",1
An employee was installing a small motor when the motor slipped out of his hands. The motor fell onto his hands and onto the ground. His left index finger was caught and amputated between the motor and the ground.,0
"An employee was setting up and performing maintenance on a drilling machine with a panel removed. When the machine cycled, its table moved a plastic bin, which smashed the employee's finger between the bin and the ledge of the machine. The employee's left middle fingertip was partially amputated.",0
"While cleaning the area, an employee's left thumb was caught and amputated between a leveling plate and a tank.",1
An employee was using a pneumatic nail gun to assemble walls when the gun came in contact with his knee and discharged the nail into it. He required surgery and hospitalization.,1
"An employee entered a robotic palletizing area to adjust tape that was sticking to boxes. The employee was struck by a robotic arm, suffering pain and contusions on the right side of the ribs and neck area. The system was not de-energized at the time of the incident.",1
"While cleaning the bagel machine, an employee suffered an amputation after being caught in the point of operation. The machine was not turned off at the time of the incident.",1
"An employee attempted to tap into an airline to operate a nail gun. When he operated the nail gun, it exploded. The employee lost an eye and suffered multiple lacerations to the hands and face.",1
An employee was pushing push rods through the ceiling to pull wire when he fell off of a 6-foot stepladder and broke his right leg.,1
An employee was reaching for a liver on a conveyor-type table when his right wrist was lacerated by the knife he was holding. The laceration became infected and required hospitalization.,1
A maintenance employee was shot in the abdomen while trying to break up an argument between a tenant and the apartment manager. He was hospitalized.,1
"An employee was on the ground, holding onto an aerial lift. The coworker in the aerial lift did not realize the other employee was holding onto the basket, and he lifted the lift. The employee let go and fell to the ground, fracturing the left ankle and requiring hospitalization.",1
"On or about April 6, 2016, an employee fell one story down detached stairs to a lower level. The stairs then fell on top of him, breaking his vertebrae.",1
An employee was climbing down a fixed metal ladder when he lost his footing and/or grip and fell from a height of approximately 5 feet. He fractured his left leg bone beneath the knee.,1
An employee was helping the operator mount the concrete mold to the side of a slip form paver. He took the transport strands off the mold before the operator had secured the mold to keep it from overturning. The concrete form fell onto the employee fracturing his right ring finger and right leg.,1
"An employee was walking by a 260 J raw cooker containing oil, grease, and solid food for chicken feed when the cooker built up pressure, causing the door to pop open. Hot food splashed out and contacted the employee's chest, resulting in chest burns. The employee was hospitalized.",1
"An employee was operating a soil stabilizer when the equipment struck a high-pressure natural gas pipeline. The pipeline burst into flames and exploded, causing burns to the employee.",1
"On 4/6/16, an employee suffered an asthmatic reaction to a degreasing chemical that was sprayed on the floor and required hospitalization.",1
"While descending a rolling ladder and carrying a product, an employee tripped on the last few steps and fell onto the ladder, suffering multiple fractures and requiring hospitalization.",1
An employee was loading a shipping container onto a flatbed truck when his right hand became pinched between the container and the truck. His right pinky fingertip was amputated without bone loss.,0
"While investigating a noise, an employee opened a lid for a pool jet pump and was splashed with hot water and steam. The employee suffered burns to the face, eyes, neck, and arms.",1
"An employee was participating in powered industrial vehicle training. As the employee was attempting to pick up a table, the wheels on the lift turned sharply. The lift accelerated quickly, causing it to veer to the right. His right pinky finger was pinned and amputated under an adjacent table next to a wall.",0
An employee was winding in steel cable using a reel. The steel cable came off the drum and the employee placed it back with his right hand. The steel cable pinched and amputated his right index fingertip between the steel cable and the reel drum.,1
"An employee was attempting to unjam a 50-pound steel bar from a machine platform. As the bar became unjammed, it slid down through the opening, hit the platform, and struck the employee in the back, breaking three ribs and causing a puncture injury.",1
"An employee was standing on a three-step stool to stock cigarettes in overhead bins. While coming down the steps , the employee missed the last step, lost balance, fell, and struck the countertop, breaking four ribs.",1
"On or about April 6, 2016, an employee was installing an anchor point on the roof when he fell to the ground and broke his right wrist.",1
"An employee was running the casting machine when he noticed that the charge bucketful of ingots had come off of the elevator. When he attempted to pick up the ingots that had fallen onto the floor, the carrier arms (part of the chain lift elevator device) that held the charge bucket in place came down and struck his right hand, breaking it. He was hospitalized.",1
"While an employee was removing two rolls of paper from a winder, the stops came up and twisted one of the rolls. The employee's left forearm was caught and fractured between the rolls.",1
"An employee was on a ladder trimming branches when he was hit by a falling branch. He then fell approximately 5 feet to the ground, suffering broken ribs and a damaged spleen.",1
"An employee was elevating an order picker when three of his fingers were caught between the top of the cage and a steel beam in the ceiling, fracturing and crushing the fingers.",1
"On April 6, 2016, an employee was hospitalized with a broken leg after slipping and falling from a step on a box truck.",1
An employee was attempting to push a 400- to 500-pound upright plastic floater when his left ring fingertip was caught between the plastic tank and a forklift tine. He suffered a possible fingertip amputation.,0
"An employee was breaking a horse when the horse ran into the metal railing of the pen, fracturing the employee's knee.",1
"While riding an ATV, an employee hit a rut and was thrown from the vehicle. He struck the dirt road and sustained broken ribs, a collapsed lung, and broken neck vertebrae.",1
An employee was placing a tiger in a cage when his right hand struck the cage housing. He experienced bruising and discomfort and was hospitalized.,1
"While stepping off a ladder, an employee missed the last step and fell to the ground, injuring his left knee and requiring surgery.",1
"On or about April 6, 2016, an employee was cleaning a food slicer when her right ring fingertip contacted the spinning blade and was amputated. The slicer was unguarded and running at the time of the incident.",0
"While delivering mail to a residence, an employee was startled by a dog and fell backwards, injuring her hip.",1
An employee was cleaning the kitchen. A cutting board fell onto the employee's hand breaking a finger.,1
An employee's middle fingertip was amputated when a pool table fell on top of the employee's finger.,0
"An employee was replacing a blow valve on a digester. The line was broken and was open for 15 minutes. When the employee returned to remove the two remaining bolts on the right side of the valve, the employee was exposed to black liquor from the paper processing line. The liquor came down and burned the employee's abdomen, left thigh, and both arms.",1
"An employee was moving bricks on the roof of a one-story house when he lost his balance and fell approximately 10 feet to the ground, suffering left leg trauma.",1
"An employee was on a 4-foot stepladder, cleaning caulking off of a window frame to install a new window. He fell from the second step to the concrete below and broke his left ankle.",1
An employee was fine grading a stone with a shovel when an excavator backed up and pinned the employee's legs. One of his legs was amputated and the other suffered broken bones.,1
"On April 7, 2016, an employee was pulling a large bag full of plastic while walking backwards when he tripped on a bag of flour and fell, striking his head on the floor.",1
"While sweeping the front store area next to the tower baskets, an employee began to experience respiratory/breathing problems. The employee was hospitalized.",1
An employee was loading metal plates into the bucket of a Bobcat when the equipment tipped over and struck the employee's foot. The employee suffered a contusion that became infected and required hospitalization.,1
"On 04-07-16, an employee was adjusting/operating a coil machine when two looping blocks came together and pinched the employee's finger, amputating the left index fingertip.",0
"While descending a step ladder, an employee fell from the lower rungs, injuring his head and torso and breaking two ribs.",1
An employee was operating a right angle grinder cutting a door jamb when the frame pinched the grinding wheel causing it to kick back and strike the employee in the left bicep.  The employee required surgery to repair the injury and was hospitalized.,1
An employee was installing a new auger bag for the CNC machine when his right index finger was partially amputated by the auger blade. The safety tube covering the blades was not in place properly at the time of the incident.,0
"On April 7, 2016, an employee was using a walk-behind skid steer machine to pick up steel debris in the basement of the mill.  While picking up a piece of steel with the bucket, the bucket became stuck due to the weight of the steel. The back end of the skid steer raised up and moved the employee's hand to a flange, where the employee's left ring fingertip was amputated.",0
An employee working on the Phosphate Line was transferring parts from one bin to another bin when his left thumb was caught on the side of the bin and amputated.,0
"An employee was inspecting a rotary valve airlock system. He opened a hatch to see if it was plugged and attempted to move some plugged material. He contacted the internal rotating parts, partially amputating three left-hand fingers.",0
"While exiting the back of a delivery truck, an employee's ring became caught on part of the door. His left-hand ring finger was severely injured.",1
"An employee slipped and fell while walking through the bottom of a cyclone (large tube) interior, breaking her ankle.",1
"An employee was operating a press machine when a part fell into the scrap conveyor. He went to retrieve the part and his glove was caught in the moving conveyor, amputating the end of his left middle finger.",0
"On 4/7/16, an employee was ripping a 2'x10' board on the floor with a circular saw when the blade amputated a quarter-inch of his left finger.",0
An employee was repositioning a platform on a construction site when it collapsed to the level below. The employee fell 18 feet and was hospitalized with a broken hip.,1
An employee's left middle fingertip was amputated in the chute of an electric grinder while he was grinding beef.,0
"An employee was cleaning a chiller when a coworker turned on the equipment. The paddle in the chiller struck the employee's right hand, breaking and lacerating the middle and ring fingers. The equipment was not locked/tagged out at the time of the incident.",1
"An employee was walking up the stairway while carrying a sheet of sheet rock. A gust of wind came and caught the sheet rock like a kite, knocking the injured employee backwards. He lost his balance and fell 5 to 6 feet to the ground, suffering a concussion.",1
"An employee walked behind a counter and slipped and fell, breaking the left kneecap.",1
An employee was attempting to lift/tilt a scissor lift with coworkers when he pulled his right arm bicep.,1
An employee was struck by a front-end loader while he was removing a chain from a dumpster. He was crushed from the waist down.,1
"A maintenance employee attempting to repair a machine's gate asked a coworker to trip the mechanism to start the machine. The coworker accidentally started the machine a second time, amputating the employee's right-hand middle and ring fingers between the platen and gate.",0
"An employee was clearing brush near a chain link fence at a right-of-way when the employee's saw became caught in with the fencing, causing it to kick back. The employee sustained a horizontal 6-inch to 8-inch laceration across his upper chest, below the neck. He was hospitalized and received stitches.",1
"An employee was tracing a wire under the hood of a powered industrial vehicle when his right hand contacted the cooling fan, lacerating the thumb, index, and middle fingers.",1
An employee had exited a forklift when a coworker traveling in the same direction in a motorized pallet jack forklift struck his left ankle.,1
An employee twisted and fractured his ankle while carrying a 4x4 piece of wood on his shoulder.,1
An employee was cleaning fiber off a moving part/sprocket and suffered a partial amputation of the right ring finger.,0
"An employee fell approximately 47 feet off the grating in the air recovery area, breaking her right arm and injuring her hip.",1
An employee was working on a transformer when another worker hooked up a generator to the power shop and a back feed caused the employee to receive an electrical shock to his hands and side.,1
"A maintenance employee completed a repair on dough sheeting equipment. After the repair, he attempted to wipe a metal shaving off the running machine. His rag was caught by the equipment and his left index finger was crushed, requiring hospitalization.",1
"An employee climbed up a ladder to enter a trailer and fix flaps on the trailer belt that were laying the wrong direction. When he climbed over the side of the trailer and turned his body, he aggravated a previous hernia and required hospitalization.",1
"An employee was cleaning while a coworker was pushing a cart of hot coffee nearby. A carafe of hot coffee fell off the cart and spilled onto the employee's ankles, causing severe burns that required hospitalization and surgery.",1
"An employee was raising the slide gate on his truck with one hand on the controls and the other hand free. He slipped and his left hand was caught between the truck and rising gate, amputating his left middle fingertip.",0
"A maintenance employee was greasing a bearing and could not get the grease to flow. When he put his finger on the fitting to get the grease to flow, other workers moved the motor, which amputated his right middle fingertip.",0
"An employee turned a piece of metal machinery over using a crane. A part of it came loose and landed on his hand, amputating his fingertip.",1
"An employee was driving a dump truck on an oil lease when the truck rolled over. The employee suffered head lacerations, a brain hemorrhage, and a bruised shoulder and thigh.",1
"A maintenance employee was using a sledge hammer to remove an end cap on an axle to a ride. The sledge hammer struck the employee's right pinky finger, crushing it.",1
"An employee was cutting a board with a metric (powered hand saw) saw that is secured to a table when his hand contacted the saw blade, amputating his left index finger.",0
"An employee was installing shingles on a two-story house when the employee lost their footing and fell, suffering a broken back and two broken hands.",1
"While cutting lumber using a miter saw, an employee's left index finger was amputated.",0
An employee's finger was amputated in the point of operation of a brake press.,0
A piece of mulch perforated the sole of an employee's boot and punctured his foot while he was edging along some bricks. The wound became infected and the employee had to be hospitalized.,1
"On April 8, 2016, at approximately 12:30 p.m., a maintenance employee was standing on a stepladder, working above the ceiling. The employee was using PVC cutters to cut into a clogged pipe. When the pipe was cut, a corrosive liquid showered onto the employee's head, face, and arms. The employee received chemical burns and was hospitalized",1
"An employee tripped while exiting a towing car, suffering a broken hip.",1
"On or about April 8, 2016, an employee suffered a fingertip amputation when the left middle finger was caught between steel coils on a conveyor.",0
An employee was operating a walker stacker when the stacker reversed over the employee's foot. The employee was hospitalized with a foot injury.,1
"An employee was conducting inventory on stove sets. As he climbed onto returnable crates that were more than 12 feet high, he grabbed onto one of the crate's fold-out doors. The door came unlatched, causing the employee to fall onto the concrete floor. He suffered lacerations, fractured ribs, and a partially collapsed lung.",1
"An employee's right thumb was caught in a safe door she was closing, crushing/amputating her thumb tip above the nail.",0
"An employee was delivering goods to a client, unloading a truck through the side door. The employee slipped and fell from the truck, striking their ankle on the ground and head against another parked vehicle.",1
An employee was cleaning a mixer using acetone when a flash fire occurred. The employee received burns to both hands.,1
"An employee was inspecting a load of incoming scrap material. While trying to close the grain chute door of truck, the employee's fingertip was caught by the door. The employee suffered a right index finger amputation.",1
"While lifting a pallet, an employee bent down, felt a crack, and slipped and fell. The employee was hospitalized with a lumbar injury.",1
"An employee was lifting a dryer off of another appliance with a coworker when she tore her bicep, requiring hospitalization.",1
An employee was adding hydrogen peroxide to a chemical pot that exploded. The employee suffered two fractured left-hand fingers and chemical burns.,1
"An employee was cleaning inside a grain bin when the sweep auger hit him on the leg, injuring his right leg calf muscle.",1
"An employee was picking up a garbage dumpster when his left middle finger was caught between the cable and dumpster, crushing his fingertip.",1
An employee was walking through an orange grove with a ladder when the ladder made contact with overhead power lines. An electrical current entered the employee's body through his hands and exited through his feet. He was hospitalized.,1
"When an employee stepped off a platform to descend a zip line, the non-weight bearing loop failed and the employee fell. The employee suffered back injuries and broken ribs.",1
"On or about April 9, 2016, an employee's hand was caught in an air handler between the belt and pulley. The employee's fourth left-hand finger was amputated.",0
"An employee was attempting to move a pumping system out of a paint booth. A coworker assisted by lifting the pumping system with a forklift while the injured employee was observing/spotting. The pumping system slid off the forklift forks and pinned the employee between it and the wall of the paint booth. The employee was hospitalized with a broken right leg, broken right forearm, and a cracked sternum.",1
An employee was cleaning a framework near a conveyor when he fell and broke his upper right arm between the conveyor and the framework.,1
"An employee was putting a filter system back into service after changing product filters when he was sprayed with sulfolane product, suffering second and third degree burns.",1
"While dismounting a forklift, an employee misstepped and fell on his left hip, breaking it.",1
"A maintenance employee was troubleshooting a water heater in the ceiling when he lost his balance. He grabbed onto a wire that supports the ceiling, and the sharp wire cut his left-hand middle finger and tore a tendon.",1
"While driving a transfer car, an employee's foot contacted an in-feed conveyor, partially amputating his big toe and index toe. His foot was hanging outside of the car at the time of the incident.",1
"An employee was operating a crane to load grain onto an ocean-going ship when a hydraulic hose failed and caused a fire after contacting a muffler. The employee exited the cab of the crane and landed on a catwalk, breaking the right leg.",1
"On April 9, 2016, an employee was sanding a metal part using a stand-alone upright disc sander when the rotating sander part grabbed the metal part and the employee's gloved left thumb. The employee's thumb tip was amputated.",0
An employee was admitting a patient to the hospital when the employee had a severe reaction to cat dander on the patient's clothing.,1
"On or about Saturday, April 9, 2016, at 8:00 a.m., an employee fell from a yard spotter to the concrete, suffering head trauma.",1
"While operating a conveyor, an employee's glove became entangled between the conveyor belt and the belt tensioning roll, causing a finger amputation. The equipment was unguarded at the time of the incident.",0
"While walking into work, an employee turned to wave at someone and tripped. She fell onto her right side, breaking her hip.",1
"An employee slipped and fell on the floor while passing through the kitchen wash area, breaking his left ribs and injuring his lungs. He was hospitalized.",1
"An employee was attaching hydraulic clamps to cattle hide when the employee's left hand was caught in the clamps, fracturing all of the fingers.",1
"An employee was standing on a step stool, organizing products in the cooler, when she fell off the stool and fractured her left leg.",1
"An employee was struck by a door as he entered the facility, injuring his eye socket and cheek.",1
"A maintenance employee was unjamming a part in a new piece of equipment. The part unjammed and the slide went forward, amputating his right index fingertip.",0
"An employee was showing a maintenance man an issue with a machine. As the employee was pointing to the problem, his finger was pulled into the rotating belt and pulley, amputating his right index fingertip.",0
"An employee was attempting to close a valve while standing on a platform. One of his feet slipped off the platform, causing him to fall. He was burned on his left lower leg when it came into contact with the condensate that had been heated with steam.",1
"While attempting to thread tape on a machine, an employee's hand was caught in a roller, breaking the employee's left wrist.",1
"An employee was removing a piece of plastic product from a mold when the employee's fingers were smashed between the mold and the machine, partially amputating the right-hand ring and middle fingers.",0
"An employee was lowering an irrigation pipe into a trench when the pipe slipped from its rigging. The employee's knee was caught between the falling pipe and a coupler screw, requiring surgery to remove shattered bones from the knee.",1
"An employee was on an A-frame ladder troubleshooting the sawmill conveyor system. He fell from the ladder and his left pinky finger was crushed by an unguarded chain and sprocket gear, requiring hospitalization.",1
An employee was carrying items from her car in the parking lot towards the office when she lost her footing and fell fracturing the left hip.,1
An employee fell from a roof to the ground and was hospitalized with a broken right shoulder.,1
"On or about April 11, 2016, an employee was operating a spiral winder when the bobbin ran out of wire. While he worked on the bobbin, the machine activated and pinched the employee's right index finger, partially amputating the fingertip.",0
"An employee pushing a cart felt a snap and pain in the hip. The employee's prosthetic hip broke, and the employee required hospitalization.",1
An employee suffered a left wrist cut while cutting trim with a miter saw when the employee's coat sleeve was caught in the guard.,1
"While using a magnetic drill, an employee's gloved hand was drawn into the drill, amputating the right thumb above the first knuckle.",0
An employee was attempting to remove a clog beneath a trim press when the die amputated the employee's left-hand middle fingertip.,0
"While cutting boards of wood on an up-cut saw, an employee's right thumb and part of his index finger were amputated by the saw blade.",1
An employee fell approximately 2 to 3 feet down a set of stairs at the loading dock and suffered a broken hip.,1
"An employee was cutting a hole in a wall while standing on a 7-foot ladder. He lost his balance and fell off the ladder, breaking his right foot, suffering an internal injury, cutting his forehead, and injuring both hands.",1
"An employee drove a van off of an automotive lift, striking a wall and suffering a back injury.",1
"On or about April 11, 2016, an employee amputated her right fifth finger after it contacted the blade of a spindle saw.",0
An employee was working from a portable ladder when the employee slipped and fell. The employee's hand became caught on the metal garage door and was lacerated.,1
"An employee was directing a forklift that was moving a transformer and its stand. After the forklift lifted the transformer and stand, the transformer began to shift and fall, causing the stand to fall on its side. The stand bounced and one of its metal legs hit the employee, cracking two of the employee's ribs.",1
"On an access road, a front-end loader operator lost control of his vehicle and slid into the path of the injured employee, who was driving a garbage truck. The front-end loader crushed the garbage truck cab, trapping the injured employee and crushing the employee's left leg.",1
"On 4/11/16, an employee was replacing an air valve beneath an RV motor coach when the coach pinned him beneath it for several minutes until he was freed by other employees using jacks and a forklift. He was hospitalized with cracked rib(s) and a superficial laceration of the liver.",1
"On or about 4/11/2016, an employee was helping to guide and signal a backing truck when he was struck by the truck, eventually requiring hospitalization for a back injury.",1
"On or about April 11, 2016. an employee was working in an electrical cabinet when an arc flash occurred. The employee was hospitalized with burns on the face and forearms.",1
"The injured employee was operating a Crown 4500 Pallet Jack (stand up type) and was in the process of navigating it into the designated parking area, when his left foot became caught between the parking space concrete curb and the left side of the pallet jack. The employee sustained a fractured left foot.",1
"While operating an electrical powered industrial truck, an employee backed into a metal table edge that lacerated his left leg.",1
"An employee was riding an ATV to set fire markers. While making a left turn, the employee lost control of the ATV and fell on the road, suffering an injury.",1
An employee that was operating a stand up power industrial truck at the warehouse of the distribution facility collided with a material rack system and suffered fractured ribs. He was hospitalized.,1
"An employee had just finished giving a class to new drivers and was strapping his equipment into the rear of a semi trailer. The end of the strap came loose on one end, and the momentum of the tightening strap pulled the employee out the rear of the truck to the ground. The employee suffered an elbow contusion and broken pelvis.",1
An employee was cutting croutons with a serrated bread knife and amputated a portion of his thumb.,0
"An employee was ascending the container attached to a dump truck when he fell and broke his left forearm, requiring hospitalization and surgery.",1
An employee was walking out of the parking lot through a man door when he was struck by a yard truck. He was hospitalized.,1
An employee's right middle finger was amputated while installing a safety guard.,0
"While adjusting the fill levels on a machine with a wrench, an employee amputated the right-hand middle fingertip.",0
"On 4/12/16, an employee's hair was pulled into the roll straightener machine's rollers. The employee sustained a scalping injury.",1
"An employee was pushing a cart with a spindle on top of it when the cart wheel hit a bump and the cart tipped over. The spindle fell on the employee's foot, flattening the employee's steel toe and breaking a foot bone. The employee required surgery and overnight hospitalization.",1
"While operating a table saw to cut lumber, an employee amputated two fingers and lacerated another.",1
"An employee was parked in a residential incline driveway. The customer asked if the employee could move his truck. While backing up the vehicle, the right side of the vehicle was off the driveway in the grass. The employee exited the vehicle to look. The vehicle was still in reverse at the time. As the employee exited, the vehicle continued to reverse, and the driver's door struck and knocked him to the ground. The left front tire then ran over the employee, injuring his ribs and chest and possibly collapsing his lung.",1
An employee was riding in an elevator that ascended at a rapid pace when her head hit the ceiling. She was hospitalized with head injuries.,1
An employee opened a manhole for fiber optic installation and immediately began hyperventilating.,1
"A machine loader collided with a company truck, causing the truck to move and hit an employee's head. The employee was knocked unconscious and required hospitalization.",1
An employee and two coworkers were working from a one-frame-high scaffold to remove masonry when the scaffold tipped over to the ground. The employee was hospitalized with a fractured tailbone.,1
"While driving a stand-up counterbalance forklift, an employee struck a rack. The employee fell off the forklift and was pinned between the forklift and the rack, fracturing the pelvis.",1
An employee had provided care to residents when she experienced flu-like symptoms. She was hospitalized with the flu and pneumonia.,1
"On or about 4/12/2016, at 8:45 a.m., an employee was picking up a 40-pound box of apples while stepping on the pallet that held the box. The board of the pallet broke and the employee lost his footing, falling to the floor and hitting his back and head.",1
An employee was using a horizontal milling machine to cut a cap for an engine when the employee's right hand was amputated.,0
Employee may have been exposed to methanol and experienced symptoms consistent with methanol poisoning.,1
"An employee was using a sander to clean steel when the sanding disc caught and flipped onto his arm, cutting his wrist requiring overnight hospitalization.",1
An employee was performing physical training when he became ill and required hospitalization.,1
An employee was helping to stabilize an optical comparator on the forks of a forklift when the machine shifted slightly. One corner of the machine slipped off the edge of the fork and hit the employee's leg above the ankle. The employee was hospitalized with a broken leg.,1
"An employee was unloading a steel plate from a trailer at the dock when the steel plate fell from the forklift forks onto his right foot, breaking three bones.",1
"An employee fell while stepping up onto a sidewalk and then fell a second time while stepping down stairs. The employee suffered right knee, hip, and bilateral hand contusions, as well as an abrasion and strain.",1
An employee walking through the company parking garage stumbled while passing between two parked cars. She suffered multiple fractures in her right ankle.,1
"An employee was operating a hand saw while cutting concrete blocks when the blade pinched up and kicked back. The employee lost control of his upper hand, and the machine spun around and came down on his left bicep, lacerating the muscle. He was hospitalized for surgery.",1
"An employee was loading a pile of limbs from the curb side into the back of a garbage truck. The employee's glove was caught in the hydraulic packing blade of the truck, injuring three fingers and requiring surgery.",1
"An employee and a backhoe operator were leveling the waler on a slide rail system. The backhoe operator flipped the bucket, pushed up the waler, and lost sight contact with the employee. The operator then lost his grip on the bucket, causing the waler to fall.  The waler hit a 8' 2""x4"" piece of wood, which jumped up and hit the employee in the face. The injured employee lost consciousness and was hospitalized with a fractured jaw.",1
"On April 12, 2016, at about 7:05 p.m., an employee was trying to clean out pieces of fish from the 4-pound feed conveyor when the employee's fingers were caught by the machine's knife, amputating the right third and fourth fingertips.",1
"An employee was walking through the employee dining room, tripped and fell fracturing his right hip.",1
"An employee was nailing with a nail gun. When a nail hit another nail, it bounced off and struck the employee in the left eye. The employee required surgery for the eye injury.",1
An employee in a scissor lift was helping to repair a heater approximately 17 feet above ground level when the lift platform collapsed. The employee sustained injuries upon impact with the platform.,1
"An employee was cutting 2"" by 4"" pieces of lumber with a saw when the saw kicked back and partially amputated his left index finger at the second joint.",0
"An employee fell from a pole while connecting wires, suffering a broken right arm.",1
"An employee was setting up a tillage tool. While he was placing the tillage frame on jack stands with an overhead crane, the lifting straps fell off the crane hook, causing the frame to drop on the employee's foot, lacerating it.",1
An employee was unclogging a hose used to spray roofing products when the chemicals in the hose sprayed into the employee's face and eye.,1
An employee's left index finger was partially amputated to the first knuckle while he was using a panel saw to cut the edge off of a board.,0
"An employee was performing a clean-in-place process using pressurized 2% caustic solution when the hose connection broke, spraying the employee and causing a 2nd degree burn to the employee's left forearm. The employee was hospitalized.",1
"On 4/13/16, an employee slipped on metal decking and fell approximately 10 feet, suffering fractured ribs and a fractured skull.",1
"An employee was inspecting a roof when it collapsed. He fell 16 feet through the roof to the stairwell below, breaking his leg and dislocating a shoulder.",1
An employee was removing gauges from a compressor when refrigerant came out and caused first and second degree burns to his right hand. He was hospitalized.,1
The employee was riding a pallet jack while loading trailers. The handle of the pallet jack jerked and the pallet jack moved quickly pinning the employee against the trailer wall.,1
"While climbing a ladder into a barge to offload the remaining grain, an employee fell 15 to 20 feet from the ladder, suffering a broken elbow.",1
"An employee was egressing from a 12 foot A-frame ladder and slipped and fell. The employee suffered a concussion, a thoracic sprain and minor lacerations.",1
"While an employee was transferring his issued duty weapon from one holster to another, the weapon engaged some keys on his duty belt. The keys entered the trigger guard, and as he pushed the weapon into the holster, it discharged. The bullet struck and wounded his left-hand middle finger.",1
"An employee was working on a lift truck. While putting the chain back on the lift truck's forks, the employee accidentally knocked it in gear and the boom fell. The forklift chains on the boom amputated the two middle fingers on his right hand. One finger was cut below the nailbed and the other was cut in the middle of the nailbed.",0
"An employee fell as he was walking down the aisle to his work station, injuring his ankle and requiring hospitalization.",1
"On 4/13/15, at approximately 5:00 p.m., an employee was setting up a metal grinding machine. During the setup process, he attempted to remove the part that was to be worked on. The manual control was in the reverse position at the time. As he pushed the job button with his right hand, his left ring finger was caught between the part and a machine guide, amputating his fingertip.",0
"An employee was clearing a small pine tree from the road using an axe. The axe went all the way through the tree and struck his right shin, causing lacerations and a small fracture. He was hospitalized.",1
"An employee was helping to take a cable winch system down. The system had been used to pull a heat exchange bundle. The employee's hand was on a poly snatch block when the operator moved the cable. The employee's fingertip was caught between the cable and poly snatch block, resulting in a distal finger amputation.",0
"An employee was unstrapping steel cross beams so material handlers could deliver the material into the facility. While unstrapping the cross beams, the load shifted and dropped onto the employee. The employee suffered facial, skull, and lumbar fractures, requiring hospitalization.",1
"On or about April 13, 2016, an employee was cleaning off a machine with a compressed air hose when she lost control of the hose's coupler end. The air hose end whipped up and struck her in the eye, requiring hospitalization.",1
"While connecting beams and attempting to torque the bolts, an employee was pinned between the beam and the lift controls. He fractured his back and two ribs and suffered a collapsed lung, requiring hospitalization.",1
"An employee was working on the ground, backfilling a sidewalk with hand tools. When a nearby excavator operator reached to close a window, the operator's knee struck the bucket control lever. This caused the bucket that was resting on the ground to extend and strike the left foot of the employee who was working on the ground.",1
An employee was installing a scissor assembly on a high reach forklift. A finger was pinched while aligning two holes when the assembly moved resulting in the amputation of the left index fingertip.,0
"On 4/13/16, an employee was working on a road/street/underpass project, installing ""mini piles"" that consisted of digging holes and inserting rebar, casing, and grout/lye. Grout/lye entered the employee's rubber boot, burning his right foot and requiring hospitalization.",1
An employee was standing on a ladder and fell off approximately 20 feet when the feet of the ladder slipped. The employee suffered a fractured right elbow.,1
"An employee was removing spouts on a decommissioned grain elevator. While the employee was removing the last spout, the grain elevator collapsed and the employee fell approximately 50 feet, suffering a fractured femur, shattered left heel, and facial lacerations.",1
"An employee was tightening a bolt on the mixer so it would not move. She started to fall and tried to catch herself with her hands, fracturing her right wrist on the concrete floor. She was hospitalized.",1
"An employee was using an electric pulley to raise materials up a scaffold when the employee's finger became stuck in the pulley casing, resulting in a partial finger amputation.",0
"An employee was replacing an aerial drop wire from a ladder. The employee missed a rung while descending the ladder, falling approximately 15 feet to the ground. The employee suffered a bruised left lung, shoulder, and knee, as well as a bruised and abraded back.",1
"An employee was using a flight simulator and was attempting to slide the right seat (passenger).  The vertical seat adjustment lever was activated instead of the horizontal adjustment, and the seat went down while his right hand was searching underneath for the horizontal seat adjustment mechanism, amputating a fingertip.",0
"An employee was operating a forklift when the forklift lost traction and hit a racking system. When the employee attempted to brace himself, his right hand was caught between the mast and the rack, pinning his right wrist.",1
"An employee moving a part with a crane was struck by the part, suffering a head injury.",1
"An employee was inspecting bridge-cleaning activities and was walking on the 5' 6""-high wood bridge with 14"" rails. The employee took a step back, tripped on the rail, and lost balance. The employee fell back off the bridge and suffered neck fractures.",1
"An employee was cutting a branch with a hand saw. The hand saw cut through the branch faster than expected and struck his left hand, lacerating the tendon between his ring and pinky fingers. He was hospitalized for surgery.",1
An employee tried to open a gate while on a forklift truck when his finger was pinched between the gate and a concrete wall. The distal phalange on his right ring finger was amputated.,1
An employee was removing panels from the building while working on top of a connex trailer. The employee fell from the trailer and suffered fractured vertebrae.,1
An employee was repairing a flow pipe when he tripped and fell backward with the flow pipe on his body. He fractured his left ankle.,1
"On or about April 14, 2016, at approximately 7 AM, a crane operator and an employee were setting up to carry a load to the mill. The crane operator was setting riggers for the crane while the employee was in the area when the crane's outrigger crushed the employee's left foot, fracturing it and possibly amputating toes.",1
An employee was operating a crane when a piece of steel tubing fell on and crushed his left foot. He was hospitalized.,1
"While cleaning up liquid that leaked from frozen meat onto the floor, an employee slipped and fell, suffering a tendon injury to the shoulder and a muscle injury to the buttocks.",1
"An employee was working with a piece of metal on a shear machine while wearing gloves when his hand became caught on the machine guard. The guard pulled the glove and his left middle finger into the machine, amputating the fingertip almost to the first knuckle.",0
An employee was leading horses to the stable at night when a horse was spooked. The horse turned and kicked the employee in the head. The employee was hospitalized.,1
"An employee was entering the hospital facility when she tripped on the floor mat and fell, breaking her wrists and requiring hospitalization.",1
"An employee was helping coworkers move a canoe rack when it dropped on his right ring finger, partially amputating his fingertip.",0
An employee was using a ladder to enter the office through the window above the office door. The employee fell to the floor and suffered a fractured right elbow.,1
"An employee selecting product from the racks fell to the floor after a pallet jack went by, breaking his left wrist.",1
"An employee was tossed from an aerial lift/bucket when the silo/pole being lifted broke away and struck the arm of the aerial lift. The employee sustained a broken left ankle and pelvis, a punctured lung, and a concussion.",1
"An employee was installing internet on a mid span cable using a 28-foot extension ladder. While the employee was descending, the ladder shifted and the employee fell to the ground, suffering contusions.",1
"While crossing a passageway, an employee was struck by a forklift being operated by another worker, suffering a broken tibia and fibula. At the time of the incident, the forklift driver's view was blocked by the lift's jib.",1
"An employee operating a stand-up forklift had just put a pile of empty pallets under a rack at floor level. While backing away, he hit the rack behind him, injuring his left hip.",1
"An employee was loading a dolly when the dolly slipped, amputating the employee's left index finger before the first knuckle.",0
"An employee was using a saw to cut the window meeting rail when the saw guard activated and came down on the employee's right thumb, trapping it between the guard and the work table. A coworker came over and tried to help him unpin his thumb. When his coworker grabbed the saw, the sawblade activated and amputated the tip of the employee's trapped right thumb.",0
"On 4-14-2016, at 12:15 p.m., two employees were dispatched to trench, lay cable, and connect service to an underground pedestal. During the installation, the first employee fell on the second employee, who was preparing the wire to be installed in the pedestal's energized bar. The first employee's left arm made contact with the energized 120-volt bar and was electrocuted. He was hospitalized.",1
An employee was installing a wood beam as part of the framing for the garage of a new home construction. He was carrying the beam up an A-frame ladder when he lost his balance and fell. The beam fell on top of him. He sustained an eye injury and head laceration.,1
An employee was transferring wax from a storage tank into a tanker truck. The employee opened a valve that was under pressure and a fire occurred. The employee sustained second and third degree burns to the face and neck.,1
"An employee was replacing heat tape on the head of a plastic film bagger when the machine head cycled and pinched his left hand, partially amputating his third and fourth fingertips.",0
A maintenance employee was troubleshooting an ink press when his jacket was caught in the antilock and cylinder gear of the flexographic press. His right arm was pulled into the machine and was amputated from the elbow down. The machine was not locked out/tagged out at the time.,1
"An employee and coworker were installing a cable lifeline while standing on a scaffold platform. The wall plate of the middle scaffold support broke at the connection point, causing the employee and coworker to fall approximately 12 feet. The employee was hospitalized with a ruptured spleen, requiring surgery.",1
"An employee was operating a powered industrial vehicle when she lost balance and grabbed onto the throttle. When she grabbed the throttle, she drove into a wall, smashing her leg between a rack and the vehicle. She suffered a large laceration that required surgery.",1
An employee was canting a pole (moving a power pole from the ground to a standing position) when the rope and cant hook slipped because they were wet. The employee fell backwards and put his hands behind him to catch himself. He landed on his right hand and broke it near the wrist.,1
"An employee was using a cutting torch to disassemble a steel processing tank. The employee was working on the top of the tank, approximately 7 feet above a lower level. The employee walked over a section of the tank that had previously been cut but was still attached to the structure. The section gave way and the employee fell approximately 7 feet to the ground, fracturing the pelvis and left elbow. Fall protection was not worn at the time of the incident.",1
"An employee was installing a machine gear on an elevator using rigging and chain falls when the employee's left pinky was pinched in the rigging, removing the fingernail and some flesh.",1
"An employee was moving flippers for the lumber to go up to the rack. The employee's gloved hand was caught in a 12-foot long shaft, resulting in a left thumb amputation.",1
An employee was bending rebar when part of his little finger was amputated.,0
An employee had just completed nailing a pallet with a nail gun. The employee's finger was on the trigger as the nail gun was set down. The nail gun brushed the employee's upper leg and went off. The nail punctured the employee's right kneecap.,1
"An employee was filling a natural gas powered vehicle. A noise startled the employee, who then fell backward and made contact with the lip of the fueling island, breaking his right leg in the process. He was hospitalized for surgery.",1
"An employee putting thread protectors on drill pipe was resting his hand on a TM-80 iron rough neck. The rough neck operator did not see his hand and started retracting the equipment, which caught the employee's right hand in a pinch point and broke a bone.",1
"While operating an erosion blanket machine, the employee attempted to clean hay out of the machine. His left hand was caught on the belt and his arm was pulled in, causing a broken left ring finger, laceration, and crushing injuries to the left arm.",1
"The employee was going to address a mechanical or electrical problem that occurred and caused some shingles to fall onto the floor.  The employee went to pick up the shingles on the floor and when he stood up, he struck his head on the conveyor resulting in neck and back injuries.",1
An employee was changing the cassette in a large commercial kitchen dishwasher when the solution inside the dishwasher spilled out onto the employee's feet. The employee suffered a chemical burn and was hospitalized with an infection.,1
An employee was using a table saw to cut flooring when the saw partially amputated his right-hand ring and middle fingers.,1
An employee was inspecting a newly delivered military tank. The wind caught the hatch as it was being opened and caused the employee to fall approximately 11 feet from the top of the tank to the ground below. The employee suffered a broken rib and head lacerations.,1
"An employee was performing product quality checks on an AccuShear press machine. As she was lining up the product, the press cycled and the cylinder came down, crushing and amputating her third left-hand fingertip.",0
"An employee was unhooking a crane hook from a conveyor that was loaded on the flatbed of a truck. The hook or chain from the crane caught on the conveyor, causing it to tip and knock the employee off the trailer. The employee suffered severe right leg injuries.",1
"An employee was cleaning a piece of equipment while standing on a 6-foot fold-out ladder. The employee placed his second foot back on the ladder and felt as if the ladder was going to tip over.  To avoid falling on his back, he dismounted the ladder, landing on the ground and fracturing his right knee.",1
"On or about April 15, 2016, an employee was setting trusses on a post frame agriculture building. While coming down from the trusses, the employee fell approximately 11 feet to the ground, sustaining upper and lower back contusions and requiring hospitalization.",1
The injured employee had just completed her break and was in the process of returning to work. The employee was walking towards the door when another employee walked through the door startling the injured employee.  The injured employee fell backwards and fractured her pelvis.,1
"An employee stepped onto a pallet on the floor to reach a box overhead. He fell backward to the concrete floor and broke his hip, requiring overnight hospitalization.",1
"Employees were offloading pipe onto a pipe stand. An employee's hand was resting on the pipe stand and when the pipe came down, his hand was pinched between the pipe and the pipe stand, breaking his left index finger.",1
"An employee and coworker were working 10 feet off the ground in an aerial lift. They climbed onto a 4-foot by 5-foot wall landing and were trying to bend a piece of rebar when the injured employee lost his balance and tripped into his coworker. Both employees fell from the wall landing. The injured employee landed on his back, breaking it.",1
An employee's finger was partially amputated when it was caught in a strap being used to rig pipe.,0
"On or about April 15, 2016, at 2 a.m., an employee was exposed to chemicals used to strip/wax floors and suffered an asthma attack. The employee was hospitalized.",1
An employee was trying to clear a jam from a degater machine when his right middle fingertip and nail were amputated. He lost approximately one-eighth of an inch of his fingertip.,1
"An employee was adjusting the chains on a piece of equipment, preparing it to be lifted by an overhead crane. The coworker operating the crane let go of the control button for lowering the chains. The injured employee thought the crane had already come to a complete stop, so he attempted to adjust the chains. His left hand was on one of the chains and while adjusting the other chain with his right hand, the chain tightened and slapped against his left hand, amputating his left middle fingertip.",0
An employee was splicing two wires using the terminal press when her left index finger entered the point of operation and was amputated.,0
"On 4/15/16, an employee was operating a cutter machine when his right index finger was amputated to about the second knuckle.",0
"An employee in an aerial lift was pulling on a come-along to align a piece of steel. The chain broke and struck the employee's leg, knocking him to the floor of the lift. He suffered a broken tibia and fibula.",1
"On April 15, 2016, a cable dropped and hit a concrete surface. A piece of metal from the cable struck an employee and injured the employee's liver.",1
An employee was adjusting a resin band with a bamboo knife when his hand was pulled into the fabric area. The lamination equipment pulled off part of his fingers (no bone loss).,1
"An employee was operating a heat sealer machine. The employee was holding a die in place that was used to seal yellow vinyl fabric. When the under plate came down, the employee's finger was crushed, amputating one-third of the right index finger (including the first knuckle).",0
An employee was using a tire jack to change a tire on a postal vehicle when the jack handle struck him in the head.,1
An employee fell and fractured her left femur while walking toward the elevator bank. She was hospitalized.,1
"An employee fell 17 feet, 6 inches, and was hospitalized with injuries.",1
"An employee tripped and fell while using a two-wheel dolly, breaking ribs.",1
"At approximately 11:00 AM on April 15, 2016, an employee was cutting cow bones using a band saw.  The employee's right hand came into contact with the band saw, amputating the right pinky finger just below the first joint (distal phalanx).",0
"While moving equipment in a surgical suite, an employee's left elbow was cut by a suction machine. The employee was hospitalized when the cut became infected.",1
An employee was attempting to reinstall a concrete pouring conveyor cable on a pulley. The employee operated the conveyor controls to cycle the pulley and re-engage the cable. The employee's thumb tip was pinched and partially amputated between the pulley and cable.,0
"While vacuuming paint chips from a curb, an employee was struck by a bus and pinned against the curb, suffering a left calf injury.",1
"While walking and conducting a border perimeter check, an employee slipped and fell 15 feet, breaking an arm.",1
"While walking in the front lobby, an employee tripped over a piece of the floor that was damaged and had a mat over it while awaiting repair. The employee fell to the ground, sustaining facial and shoulder fractures.",1
"While an employee was wiping debris from a plastic compression mold press, the vertical injector plate came down and partially amputated the employee's left middle and index fingertips.",0
"While attempting to clean out clogged material from the fat sucker machine, an employee suffered a partial amputation of the right hand distal middle finger. The machine was running at the time.",0
An employee amputated two right-hand fingers while cutting meat with a band saw.,0
"While carrying a box of parts, an employee tripped over a pallet and fell, injuring the left knee and fracturing a femur.",1
"An employee shut off the screw conveyor to readjust the machine's lid and prevent ground meat from leaking onto the floor. As the employee was closing the cover of the screw conveyor, the passing fulcrum lever amputated his left ring fingertip.",1
" An employee was handing out food samples when she tripped over a customer's foot, fracturing her left femur and hip.",1
"An employee was attempting to disconnect a hose from a 4-inch centrifugal pump on a rig that was under pressure. When the employee released the fittings, the hoses blew apart, spraying hot mud that burned the right side of the employee's face, neck, shoulder, and head, as well as his right arm and back.",1
"On 4/16/16, an employee was struck by a reversing forklift. He suffered serious leg/ankle injuries and was hospitalized.",1
"On April 16, 2016, at approximately 3:00 p.m., an employee was playing a softball game as part of a leadership retreat. While attempting to catch a fly ball, the employee ran into a foul pole and struck it head on. The employee was hospitalized with a facial injury.",1
"While an employee was cutting product in the deli, the employee's knife came into contact with a hole in the employee's glove, amputating the left middle fingertip and fingernail.",0
An employee and his coworker were loading a kayak onto the forks of a forklift. The forks were on the ground when the employee walked backward and tripped over the forks. He fractured his left wrist and required surgery.,1
An employee's left index finger was amputated while attempting to clear a piece of meat from a meat mixing machine.,0
"A maintenance employee was replacing a double backer belt on a corrugator when he fell approximately 41.5 inches off of the machine, fracturing his hip.",1
"An employee's work vehicle became stuck in the snow at a customer location. The customer offered to tow the truck with his vehicle, and when the employee was attaching the tow rope, the customer's vehicle slid down the hill and pinned the employee between the two vehicles. The employee suffered 10 broken ribs, two collapsed lungs, and a broken clavicle.",1
An employee's right middle finger was amputated at the first knuckle when the employee attempted to grab a part in the conveyor belt.,0
"An employee was performing maintenance, replacing a ribbon in an ironer. He tried to pull the ribbon by placing the slack end around his finger. The ironer then turned on and lacerated his right middle finger, which was still wrapped around the ribbon.",1
An employee's left-hand middle and ring fingers were partially amputated.,0
"A pot of hot water fell on an employee, causing second degree burns to her chest, underarms, and face.",1
An employee was assisting workers on a machine when his thumb was caught and cut between the machine and a crowbar. The employee was hospitalized and required stitches.,1
"On or about April 17, 2016, an employee stumbled while descending the steps from a turn table, landed on a track rail, and turned the left foot. The employee suffered a broken bone above the ankle.",1
"An employee was heating a mold with a natural gas burner when the hose came loose and caught on fire, burning the employee's face and neck.",1
An employee fell on stairs and fractured her knee while delivering mail to a private residence after being startled by a dog in the yard.,1
"On 4/17/16, an employee was delivering tiles to a customer's residence in a truck. After unloading the tiles, the employee fractured his right tibia and fibula while exiting the truck. He was hospitalized.",1
"An employee was cutting bone-in meat with a band saw when the saw blade severely cut two of the employee's fingers, requiring surgery.",1
"On 4/17/16, an employee was cutting down trees to clear an oil field well pad site. A previously cut tree became caught up in the tree he was currently cutting. The tree then fell down and struck his right leg, breaking it.",1
"While cleaning a sifter and rotary valve, an employee's left-hand index, middle, and ring fingers were amputated.",1
"An employee and crew were attempting to install an I-beam support upright between two horizontal running I-beam supports in an existing structure. The crew carried the support and fit it in place. The injured employee tapped the bottom of the support with a hammer to make it fit. The bottom of the beam fell off and landed on the employee's right foot, breaking the fifth toe.",1
An employee suffered four left-hand finger amputations while performing maintenance on the rotating drum of the Opener #1 machine.,0
"An employee was operating a chop saw to cut wood studs when the chop saw activated via the foot pedal, amputating the employee's left mid-forearm.",1
"While pulling a tool cart, an employee fell to the concrete floor while trying to grab a part. She fractured her L2 vertebra.",1
"An employee was conducting pre-operational adjustments on a DSI machine. While closing a panel, his left pinky finger was caught and amputated between the panel and the machine.",0
"An employee was using the freight elevator when his hand was caught between the gate door and the landing door. One finger was crushed, and another was nearly amputated.",1
"An employee was dismounting a ladder when he missed the last rung and fell on his side, fracturing his upper leg area.",1
An employee crushed his thumb between a door jamb and the railing on a scissor lift while lowering the lift from inside the basket.,0
"At approximately 8:00 a.m., on 04/18/16, an employee was reaching for an anchor point to secure his lanyard when he slipped and fell off of the roof . He was hospitalized with broken bones.",1
An employee was attempting to unjam a label in the Automatan machine when his left hand became caught between two rollers and was de-gloved. The equipment was running at the time of the incident.,1
"An employee was working from an order picker and fell approximately 12 feet. The employee suffered a broken hip, pelvis, and leg. Fall protection was not worn at the time of the incident.",1
"On April 18, 2016, an employee separating trash cans on the receiving docks began to experience shoulder pain. The employee was hospitalized with a collapsed lung.",1
"An employee was removing debris from a piece of equipment. He hit the stop button. While reaching for the debris, he activated a proximity sensor. 
The sensor in turn activated a solenoid, which activated the cylinder. This caused the die set to come down and crush/amputate his right index finger.",0
"While walking to the HR desk, an employee tripped over the lower part of a vertical stanchion at the same level and fell to the ground. The employee suffered head and back injuries, as well as a fractured femur that required surgery and hospitalization.",1
"Two employees were manually lifting a power cooling fan (approximately 60 pounds) off a stack of units on a pallet. While lowering a unit on a cart, the injured employee lost grip, or the unit shifted, and the employee suffered a left wrist laceration requiring surgery.",1
"Employees were adjusting an 8-feet-wide rollup door. The clamp holding the door up slipped, causing the door to come forward and strike/lacerate an employee's left ear.",1
"On or about April 18, 2016, an employee was helping a coworker lift the top combo from a stack of four combos. The combo slid off and cut employee's middle finger. The finger was surgically amputated above the first joint.",0
An employee slipped and fell on ice in the parking lot and broke several ribs. The employee was hospitalized overnight.,1
"An employee was observing a pipe liner as it was being extended to the stationary steel pipe in the ground. The pipe liner was slightly offline, and the employee tried to manually guide it in place right as it was making contact with the pipe. The liner jerked up as he was leaning over it and it hit him in the chin with force. He suffered a chin laceration requiring 5 stitches and was knocked unconscious. Employee was hospitalized overnight.",1
An employee was fabricating metal. He drew it over and was grinding off the weld when a tacked piece of metal used to clamp the weld shield came free and hit the grinder. The grinder fell over and cut his right forearm.,1
An employee was measuring the inside of a metal cone area while on a ladder 30 inches above the floor. The employee was on the top step of the ladder when he and the ladder fell to the side. He fractured his wrist and two ribs.,1
An employee was hospitalized after falling off a truck and hitting their head.,1
"While exiting a vehicle, an employee slipped off the vehicle step, hit her forehead on the step, and fell to the ground, hitting her head.",1
An employee's right thumb was crushed while he was trying to prevent an excavator from falling.,1
An employee was trying to adjust his truck's trailer brakes when the truck and loaded trailer rolled backward onto his right arm.,1
"An employee was on a 5-foot fixed ladder, descending a work platform, when he missed a ladder rung and slid down the ladder to the floor. He fractured his right foot and required surgery.",1
"An employee was installing metal roofing on a porch roof when the supporting pole collapsed.  The employee fell approximately 10 feet to the ground, fracturing his elbow, pelvis, and two ribs.",1
"An employee was taking plastic bottles from a conveyor and placing them on a pallet. While walking between the stretch wrapping machine and the conveyor, the employee tripped over the stretch wrapping machine and fell to the ground, fracturing the lower back.",1
"An employee was operating a maintenance cart, clearing off areas of the golf course, when the cart rolled. The employee suffered a broken pelvis and internal injuries.",1
"An employee was stacking a unit of corrugated sheets when his foot entered the path of an automated material transfer cart. His left leg was pinned between the cart and a conveyor when a coworker stopped the machine. He fractured his left ankle and lacerated both legs, requiring hospitalization.",1
"An employee was working at her computer when she experienced respiratory distress due to a coworker's perfume, requiring hospitalization.",1
An employee was moving hot oil in the kitchen when some of it spilled on her and burned both of her hands. She was hospitalized.,1
"On April 19, 2016, an employee fell off a mobile scaffold and was hospitalized for a broken leg.",1
"An employee was cleaning a window frame with alcohol when sparks from a nearby grinder ignited the alcohol, burning the employee.",1
An employee was working from a pallet raised on the forks of a powered industrial truck when he fell approximately 6.5 feet while emptying a tray of spoiled tomatoes into a dumpster. He fractured his head and pelvis.,1
An employee was scanning for overhead hazards after falling a tree. Everything looked okay.  He walked towards the tree and was struck by a falling limb that was in a different tree. The employee sustained a neck injury.,1
"After responding to an out-of-gas call, an employee was attempting to light a gas-fired log set (fireplace) for the customer when a propane flash fire occurred. He suffered burns to his hands and face, with possible respiratory burns.",1
"An employee was standing on the second step of a step ladder stocking cigarettes when she fell off the ladder, injuring her ribs.",1
"An employee was cutting metal bands containing paper bales when a 500-pound bale fell from the stack and onto the employee. She sustained crushing and struck-by injuries, requiring hospitalization.",1
"An employee had completed his lockout/tag-out procedure after cleaning the central cement batch mixer. He closed the central cement batch mixer, removed all locks and tags, and re-energized the central power source of the central cement batch mixer. He heard a strange noise coming from inside the mixer, so he shut down the mixer's power source, followed lockout/tag-out procedures, opened one of the hatches at the top of the batch mixer, and noticed a hammer inside of the central cement batch mixer. When he reached into the mixer to retrieve the hammer, the paddle struck the right side of his head, fracturing his face and partially amputating his right ear lobe. He was hospitalized.",1
"An employee was helping to work on a paper machine when his left hand was pulled into the machine, removing flesh on two fingers.",0
"An employee tripped and fell while walking down a hall, fracturing her hip and requiring surgery.",1
"An employee was pushing a rack when the rack fell over on his left ring finger, amputating the fingertip.",0
"An employee was lowering a porcelain post from an electrical transmission line in the ""right of way"" when the post fell onto the employee. The employee suffered shoulder and spleen injuries.",1
An employee was operating a shear machine when the machine actuated. The hydraulic drop came down and amputated the employee's right index finger.,0
"On April 19, 2016, an employee was rounding up cattle when a bull spooked the employee's horse. The horse threw the employee to the ground, breaking four of the employee's ribs.",1
"An employee's hand was caught in a pinch point while raising one of the legs of a cable form, partially amputating the left-hand index finger.",0
"An employee was guiding an 8"" PVC water pipe that was attached by a synthetic sling to the bucket of an excavator. The pipe was being set in place when the sling slipped from the pipe. The pipe rolled on the ground and struck the employee in the leg, fracturing the employee's upper thigh bone.",1
"Employees were removing a loading arm from the loading platform and were using a rope to hold the loading arm in place. The rope snapped, which caused the arm to swing down and hit an employee in the chest. The blow knocked him off of the platform and onto the concrete below, a distance of approximately 11.5'. He fractured his neck vertebra and skull.",1
"An employee was struck by a closing overhead door. He bounced off the door and fell backwards, hitting and fracturing the back of his head on the ground.",1
"While selecting an order, an employee was struck by falling material from a broken pallet that was being moved by a forklift approximately 30' above. The employee suffered a broken leg and head injuries.",1
An employee on a PT run with the Hotshot Firefighters (elite crew) collapsed on 4/19/2016 at 5:00PM and was hospitalized for heat stroke.,1
"An employee was helping to set up a trellis from a man basket being lifted by forklift. The basket sat directly on top of the forks, approximately 14-to 16-feet-high. When the employee moved to the end of the basket, the basket tipped and he fell out. The basket then landed on top of him. He broke teeth, fractured multiple ribs, broke his back, and suffered internal stomach bleeding. The basket was not secured at the time of the incident.",1
An employee was placing a part into a brake press machine to form it when the machine activated before he removed his finger. The top die pinched off the end of his left index finger.,0
"On 04/19/2016, at about 5:00 p.m., an employee was installing new lights on wires when a coworker turned on the breaker. The employee received an electric shock and fell 4 feet off the ladder. He was hospitalized overnight with second-degree electrical burns to one of his hands.",1
"An employee was walking on unpaved terrain. While attempting to get back on the paved path, she tripped on the 4-inch step up to the path and fell forward, breaking her hip.",1
"An employee lost his grip on a dolly and file cabinet he was moving up a flight of stairs. The cabinet fell down the stairs, hitting the employee below and breaking his leg. The injured employee was hospitalized.",1
"While operating a forklift in a sequence cell, an employee struck a column and lacerated the left foot.",1
"An employee was using a ratchet wrench to tighten a bolt when the wrench slipped, catching his finger between it and a piece of steel. His left-hand third fingertip was amputated.",0
"An employee was standing in the gymnasium bouncing a basketball. When the employee turned to walk away, he dislocated his hip and fell to the floor fracturing his hip.",1
An employee was working in Aisle 13 on a walkie rider. While backing out of the aisle he ran into another employee's cherry picker in Aisle 14. The employee broke his ankle.,1
The employee was unloading empty racks from a trailer. One rack tipped over and struck the employee's right leg. The employee sustained a laceration.,1
The employee cut his hand. He was later hospitalized when the cut became infected.,1
"On 4-19-16, an employee suffered the amputation of the distal tip of the left index finger. The tip was reattached and there was no bone separation. The injured worker placed his hand inside of a valve port to move metal shavings out of the way so that he would not damage the finish cut of a compressor. The injured worker is not sure if the shavings cut his finger or if it was the rotation of the bore mill machine that cut his finger.",1
An employee fell off a rear ladder while trying to climb into a box truck. He broke his right leg and shoulder and required hospitalization.,1
An employee was walking when he was struck by rubber gaskets that fell from a height of approximately 10 feet. He was hospitalized with a fractured right ankle.,1
"An employee was cutting wood using a table saw. The employee's right hand contacted the saw blade resulting in multiple lacerations to the right hand index, ring and pinky fingers. Two digits were amputated.",0
"An employee tripped over the cord of the ham slicer, fell to the ground, and fractured his right shoulder.",1
An employee was cleaning the metal detector with a hose when a ball valve actuator amputated the employee's left middle fingertip.,0
An employee was preparing to pour bridge deck when his pants and subsequently right leg were caught and pulled into the deck finishing machine. He was hospitalized with a fractured right leg.,1
An employee was replacing a belt on a bagging machine when it activated. The machine jaws amputated a portion of the employee's left middle finger. Lockout/tag-out procedures were not followed at the time of the incident.,0
An employee was at the bottom of a ramp painting a container when a forklift driver backing down the ramp ran over the employee's right leg.,1
"An employee was replacing the spring and U-bolt behind a tire. He was replacing the tire when the jack collapsed, catching and amputating the distal phalanges on his right-hand middle and ring fingers.",0
"An employee was working on a workover rig. While the crew was running pipe in the bore hole, the employee's hand was caught between two strands of pipe. The distal phalanges of the employee's right-hand middle finger was crushed and partially amputated.",0
An employee entering an interview room in the hospital slipped on the floor and struck their head on the door frame. The employee suffered a neck strain/sprain and was hospitalized overnight.,1
An employee fell and sustained a hip injury.,1
"On April 20, 2016, at approximately 6:15 p.m., an employee was helping to move a precast concrete panel on a dry wall cart. The 12' x 60"" concrete panel, weighing 1200 pounds, was loaded by forklift onto the cart, which had a load capacity of 3200 pounds. The cart was being navigated through a doorway by two employees. While making a turn, the wheels swiveled. The injured employee reached behind the panel and grabbed the cart to pull it forward.  The panel lost its center of balance and fell forward and onto the employee, fracturing his shoulder, ribs, pelvis, and three vertebrae. He was hospitalized.",1
"An employee was installing coping while working from an extension ladder when the ladder kicked out at the bottom, causing him to fall approximately 10 feet. He hit the ground and broke his left arm and left leg.",1
An employee had just finished loading a truck and was stepping out of the vehicle when he fell and struck his head on concrete. He was hospitalized with a head injury.,1
"On 04/20/16, at approximately 12:24 a.m., an employee was cleaning a table with a rag when he tripped on the table leg and fell backwards. He was hospitalized with a fractured hip.",1
"An employee was repairing a storage rack in the warehouse using a drill machine. The employee turned off the drill, and the still-rotating drill bit grabbed his right-hand glove and index finger.  The drill was then activated, amputating his right-hand index finger at the midpoint.",1
"An employee brought a straddle truck into the shop to change the right rear shoe assembly lifting cylinder. He used a floor jack to support the weight of the lifting shoe so the locking clamp that holds the lifting shoe onto the hydraulic lifting cylinder shaft could be removed. The employee had a crescent wrench in his right hand at the time and taped on the clamp but found that the clamp was already free of the shaft. He attempted to push the back half of the clamp out to remove it from around the cylinder shaft and put the clamp on the floor. As he was doing this with his left hand, he put his right hand down on the floor to support himself while kneeling. The jack came out from under the shoe, and the shoe dropped a few inches to the floor. The wrench the employee had in his right hand was partially under the shoe when it dropped. The shoe fell onto the end of the wrench, and the employee's fingers were caught between the wrench handle and the floor, amputating the right-hand index and middle fingers at the first joint.",0
"An employee was exiting the building when a gust of air grabbed the door. He lost control of the door and it slammed on his left middle finger, amputating the tip on the palm side.",0
An employee was removing a piece of jammed wood from the chop saw when his right-hand pinky finger was amputated by the blade.,1
"An employee was on a telescoping ladder pulling cable. The ladder did not lock properly and collapsed, causing the employee to fall 5 to 6 feet.  The employee was hospitalized with a broken wrist requiring surgery.",1
"An employee fell down the concrete stairs, fracturing her ribs and puncturing her lung.",1
"After unloading a rail car of feed pellets, an employee was helping to move the rail car. He went to slow the rail car with the turn brake and his left foot was run over by the rail car. His fractured foot required surgery.",1
An employee was climbing up an extension ladder to caulk a wood soffit which was 10 feet above the ground when he slipped and fell about five feet onto the concrete sidewalk resulting in a left wrist fracture and possible bruising to the left leg.,1
"An employee was cutting a 3/4-inch plywood using a table saw when the riving knife broke, struck the saw blade, and was thrown forward, striking and lacerating the employee's right bicep. The employee was hospitalized and required wrist surgery.",1
"An employee was strapping supply wood. The employee saw that the panel saw was not working properly and tried to fix the problem. The accumulator arm came in to catch the plywood panels while the X-lift was discharging the full load of plywood. The panels on the other side of the machine did not catch the accumulator arm, and the panels fell through and hit the X-lift. As the X-lift was coming back up, the employee saw the panels sticking up. He tried to push the panels on top of the X-lift. By that time, the X-lift had gone up, and his right hand was caught between the X-lift and the accumulator arm, resulting in a compound fracture to his right arm. He was hospitalized for surgery.",1
"An employee was transferring a piece of plate metal from one pallet to another. A forklift stood the metal plate up on the edge of the pallet. The plate metal fell over and struck the employee's leg, fracturing the femur.",1
"An employee was attempting to load a piece of medical equipment on the bed of a truck when the equipment shifted, crushing and amputating the employee's finger between the truck's lift gate and the equipment.",0
"An employee was walking toward the front door of the bank when she stepped on a rock and slipped, falling on and breaking her right hip.",1
"An employee was delivering mail to home addresses when a dog startled her. As she ran away from the dog, she fell and fractured her left forearm.",1
"While operating a chop saw to cut a piece of PVC plastic on 4/20/16, an employee amputated the left thumb.",1
An employee fell approximately 5 feet off a crane while checking fluid levels and fractured his leg.,1
"An employee dropped a piece of ice on the ground while removing a cap from a combo.  He tried to move the piece of ice out of the walkway with his foot, lost his balance and fell to the ground. He fractured the tibia and dislocated the ankle.",1
"An employee was installing a 10"" piece of duct over a doorway when his belt was caught on the ladder, causing him to fall and break his wrist and elbow. He was hospitalized.",1
"On 4/20/2016, a piece of plywood sheeting, used in poured concrete construction, fell from a floor above and struck the head of an employee standing on the ground, cracking his hardhat. He was hospitalized with a concussion and lacerations.",1
"An employee was replacing a residential septic system using an excavator.  He placed his left hand on the bucket of the excavator to gain leverage as he moved an object with his foot.  His force against the bucket caused the bucket to move.  The movement of the bucket created a pinch point between the bucket and ""thumb"" of the bucket. His left ring finger was caught and crushed in the pinch point.",1
"An employee was preparing to change a table saw's blade. Before doing so, he cut another piece of wood. As he finished cutting the board, the lumber shifted and his left hand was caught in the blade, amputating the last three fingertips on his left hand. The saw's automatic feed guard was removed at the time of the incident.",0
"An employee's left index finger was caught in the concrete delivery chute during installation. The wound would not heal therefore, the finger was medically amputated.",0
An employee fell and broke his upper right leg when stepping down from a 24-inch-high A-frame cart used to transport glass.,1
"An employee and his coworker were about to change a V-belt on an exhaust fan. They disconnected the power of the fan, but the momentum of the air handler caused the fan to spin in reverse. When the employee attempted to stop the fan blades from moving, his pinky fingertip was amputated.  His middle and ring fingers were also injured.",0
"An employee was loading rebar onto the forks of a forklift when the rebar rolled off the forks and struck the employee, breaking the right leg.",1
An employee's right hand was caught between a beam and a pressure roller and amputated.,0
"An employee took the cover off a chain and tried to grease a bearing. The PTO was engaged and the chain was moving at the time. When the employee put one pump in, the chain caught his glove, sending his fingers in through the sprocket and chain. His left thumb was partially amputated, and his index, middle, and ring fingers were lacerated and crushed.",0
An employee was performing maintenance on a piece of machinery when the machine became energized and amputated his right index finger.,1
An employee was in the back of a pickup truck with a lift. The employee was standing on the lift as it was being raised. His foot was hanging over the edge and his right big toe was caught. The injury requires surgery and the toe may be amputated.,1
An employee was threading some 3-inch conduit when he identified burrs that needed removal.  He was using his channel locks to get rid of the burrs when the channel locks grabbed and pulled his left hand into the machine. The fingertip of his left pinky finger was surgically amputated above the fingernail.,0
"An employee was troubleshooting a cable drum when the drum was activated. The employee's harness was caught by the cable, which flipped him over the drum. He landed on his head, suffering a 3-inch head laceration.",1
"On 4/21/16, at approximately 9:20 AM, an employee accidentally drank cleaning solution while mixing an iced tea.",1
"An employee was clearing a jam on a machine using a hammer.  As he used the hammer to hit the material, his hand struck a metal bar, amputating his right ring finger at the third knuckle.",0
"An employee had finished walking a dog and was about to re-enter the building when the dog tried to run and pulled the employee. She hit the building and fell to the ground, fracturing her right humerus.",1
"An employee was getting ready to run a board through the punch press. The punch press cycled while her left hand was inside it, amputating four fingers.",1
"An employee opened an electrical cabinet door while conducting an infrared survey. An arc flash occurred, burning the employee.",1
"An employee was operating the laminator machine and was trying to move material through the winding bar, but the material would not roll through. When he attempted to pull the material through, his arm was caught in the winding bar. He required surgery on his right forearm.",1
"On 04/21/16, at approximately 3:00 p.m., an employee was cutting a concrete pipe with a cut-off saw. The blade became stuck, and the guard that covers the blade struck the left side of the employee's face, fracturing the orbital bone and causing lacerations.",1
"Employees were removing the last tracks from a rider plate. When they hit the last track, the metal plate popped up and struck the injured employee, fracturing the employee's right tibial plateau.",1
"An employee was working with a screwdriver to remove a screw from a 480-volt circuit breaker when he hit an energized switchboard. An arc flash occurred, burning the employee's face and arm and requiring hospitalization.",1
"While cutting down wooden beams, an employee suffered a small knee puncture. The employee was hospitalized when the wound became infected.",1
"While adjusting a patient in bed, an employee experienced abdominal pain due to a hernia, requiring surgery and hospitalization.",1
"As an employee was collecting garbage and throwing two bags in the back of the garbage truck, the driver pulled forward and then backed up and hit the employee. He was hospitalized with two fractured legs.",1
"An employee fell from a platform roof, injuring his pelvis and breaking a wrist and arm.",1
"An employee was sitting at her desk. When she tried standing up, her shoe became tangled in the chair roller and she fell down. She was hospitalized with a vertebra fracture.",1
An employee was hospitalized due to dehydration after picking pickles in the field.,1
"An employee tripped on the wheel of a medication cart and fell to the floor, suffering a hip injury.",1
"An employee stepped off a forklift and rolled his left ankle, breaking it.",1
"An employee tripped and fell while moving a sign in the reception area, dislocating the left shoulder.",1
An employee was putting parts into the back of his pick-up truck using material handling equipment.  Once the part was in place it shifted/rolled over and smashed his pinky finger.  The bone was fractured in three different places.,1
"While replacing a light fixture, an employee suffered a shock injury and fell from a ladder to the ground. The employee suffered contusions and minor burns.",1
"An employee was operating the pallet machine, which prepares pallets of rice for transport. A bag of rice fell off the pallet while being transported via rollers to where the pallets are wrapped in plastic. The employee went to grab the bag and his right glove was caught between the rollers, amputating his right index finger pad.",0
"An employee fell from a ladder on the roof while troubleshooting a solar system installation project, breaking right-side ribs and fracturing an ankle.",1
"An employee fell from the mezzanine while installing a permanent guardrail, suffering a pelvis fracture and elbow injury.",1
"An employee was hydro blasting on top of a vertical exchanger with a 20,000-psi cleaning lance when he lost his balance and control of the lance. The water stream from the lance cut through his metatarsal boot, lacerating the top of his right foot.",1
"An employee was repairing a forklift used in the facility. While the employee's hands were inside the forklift making repairs, the forklift shifted, amputating the employee's left index finger and lacerating his other fingers.",0
An employee was holding a part in a machine when the machine cycled and amputated the employee's finger.,0
"On April 22, 2016, an employee was backing up in the trench while directing an excavator operator to come back with the bucket when he was crushed between the excavator bucket and a water main behind him. He suffered cracked ribs and contusions to the left side of his chest.",1
An employee was cleaning when a valve failure caused hot water and steam to release in the area where he was working. He suffered second degree burns on both hands and was hospitalized.,1
"On April 22, 2016, at approximately 7:15 a.m., an employee was operating a notch saw. While the employee was placing a 4-foot piece of vinyl in the saw, the saw was activated by the foot pedal. The saw amputated the employee's left index finger below the nail bed.",0
"An employee fell approximately 10 feet out the back of a truck while loading food carts on a plane, impacting the ground and suffering an injury.",1
An employee received an electrical shock while pushing a cart.,1
"While exiting a vehicle, an employee slipped off a step, landed on the ground, and broke his femur.",1
An employee was performing carpentry work with a table saw when his left index finger was lacerated by the saw. His finger had to be surgically amputated.,1
An employee was feeding metal parts into a rolling machine when her glove became caught in the rollers and her hand was pulled into the machine. She suffered a pinky fracture and index fingertip amputation. Her ring finger required stitches.,0
"An employee was standing on a ladder and using a manual pole saw to cut a tree limb. The manual pole saw extended about 8 to 10 feet. The saw became caught in the limb, and the employee was trying to free the saw from the limb. When the saw was freed from the limb, it fell, and the blade struck the employee's left arm above the elbow. He suffered a severe arm laceration.",1
"On 4/20/16, an employee was grabbing screws out of a container to hang a frame when a metal shard went into the palm of his left hand. He required surgery and hospitalization.",1
"An employee laid the dock plate down on a trailer bed to unload a trailer. A piece of wood was sticking out from the trailer wall, preventing the dock plate from laying all the way down.  The employee used his foot to kick the wood out of the way, which caused his foot to become stuck under the dock plate. His ankle broke and started bleeding.",1
"An employee was standing on the floor plate of a drilling rig when the method of attaching the floor plate to the structure failed. The employee fell 17 feet to the ground, suffering a head laceration that required surgery.",1
"An employee tripped and fell, injuring his leg/knee.",1
An intruder assaulted an employee and struck her head. The employee sustained head trauma.,1
"An employee retrieving refrigerated meat from the cooler tripped on a box/pallet corner and fell to the concrete floor, suffering a concussion and back pain and requiring hospitalization.",1
"While an employee was unloading drums onto the cut porch, he bumped a drum behind him, which had his cell phone on top of it, causing the cell phone to fall into the cutter.  When he attempted to retrieve the cell phone from the cutter area, his right thumb and index finger were amputated right before the knuckle at palm level.",0
"After making a batch of meat the employee opened up a hatch, which automatically shut off the machine. The employee's other hand entered into where the meat comes out of the grinder. The machine did not completely shut off, causing a fingertip amputation.",0
"On April 22, 2016, an employee was cutting sheets of acrylic plastic with an unguarded table saw when his right pinky and ring fingertips were amputated.",0
"On April 22, 2016, an employee was removing a grill from a trailer that was on a powered industrial vehicle (PIV). The employee's head/neck became caught between the PIV and the trailer, causing head/neck injuries that required hospitalization.",1
"Three employees were investigating an H2S odor at a cooling tower. One of the employees removed the lid from the cooling tower and stuck a measuring rod in to measure the level. The employee put the lid back on and started walking away. The employee became lightheaded and fell onto the concrete walkway, requiring hospitalization for a concussion and skull fracture.",1
An employee was bending parts on a brake press when their finger entered the point of operation while the machine cycled.  The employee sustained a right index finger amputation.,0
"An employee was setting up a powdered metal press for production. While he was attempting to check if the inner punch was firing, his left-hand middle finger was struck by the tooling, amputating the fingertip.",0
"An employee was performing maintenance on an automatic door switch when the door closed on the employee's leg, breaking it.",1
An employee was placing a bottom bar between forms on a module when his right index finger was caught and amputated in a pinch point between the leg of a material cart and the bottom bar.,0
An employee was cleaning out the straight-line rip saw when four left-hand digits were amputated.,1
"Two employees were transporting hot oil when one of the employee's legs hit the pot of oil, causing it to spill on the employee's hand. The employee released the pot and the hot oil spilled onto and burned the employee's feet. The employee was hospitalized and underwent surgery.",1
"An employee was climbing a caged, fixed ladder that was approximately 23 to 25 feet high. While he was standing on the top rung and attaching his fall protection lanyard, he slipped and fell approximately 8 to 10 feet inside the cage, breaking his ankle.",1
"An employee suffered frostbite to the hands and fingers while cleaning racks in the freezer, requiring a finger amputation.",1
"On April 22, 2016, at approximately 7:05am, an employee was hospitalized after being injured while moving a plastic water line on I-beams.  The employee and a coworker were rolling a 14 inch diameter PVC pipe weighing approximately 300 lbs. and 15 feet in length across I-beam stands.  During the roll, the pipe slipped off the I-beam and the employee's thumb was pinched between the I-beam and the pipe resulting in cuts and crushing injuries to the left thumb.",1
The employee was cleaning a bag sealing machine cutting blade and the machine cycled resulting in amputation of the right ring fingertip.,0
"While moving baseboards to the scrap pile, an employee was bitten on the hand by a rattlesnake.",1
"On April 23, 2016, at approximately 4:30am, an employee was troubleshooting a press guard that was shaking when the employee's fingertip was amputated by the machine's moving conveyor.",0
"An employee was acting as a spotter for a crane being moved. While standing between the crane and another stationary crane, the employee attempted to warn the crane operator that he was about to hit the other crane when he was crushed between the crane that was moving and the stationary crane. He suffered lung, hip, and head injuries and required surgery.",1
"On April 23, 2016, at 1:00 a.m., an employee was setting a dock board to the back of a trailer. The trailer was not aligned properly with the loading dock bay. As the employee set the dock board, it began to slip. The employee descended from the sliding dock board to the pavement below the loading dock, suffering a compound fracture to his right leg that required hospitalization.",1
"An employee was vertically lowering tubes (16-inch-diameter x 12-feet-long, with a flange on top; approximate weight= 1500 pounds) into an exchanger with an overhead crane. Due to slack in the lifting attachment, the employee grabbed the flange to try to turn the tube and align it with the lower tube sheet. His fingers were pinched between that tube and the adjacent tube, amputating the top joint of his right middle finger.",0
"On 4-23-16, at 11:45 a.m., an employee was attempting to move materials out of the way on the bag line machine when his right index finger was caught between the chain and pulley, amputating the fingertip.",0
"On April 23, 2016, at approximately 9:30 a.m., a maintenance employee was on a scissor lift with a coworker, preparing for an entombment. Working from the lift, the two employees removed the granite face from the mausoleum. As the granite was being lowered to the lift, the maintenance employee fell 12 feet from the lift and landed on the concrete surface below. The employee was hospitalized for fractures to the face, both wrists, and jaw.",1
"An employee was shot in the left forearm while serving a warrant, requiring hospitalization.",1
"An employee was walking form the fuel kiosk to the store when she tripped and fell over a curb, dislocating her right elbow and breaking her left kneecap.",1
"An employee was cleaning the equipment and floors in an area when an ammonia release occurred. The employee was exposed to the ammonia and suffered second degree burns to her right leg, requiring hospitalization.",1
Hot water splashed and burned an employee who was engaged in manufacturing operations.,1
An employee's right middle finger was cut while she was using an automatic slicer to slice cucumbers.,1
An employee was shot and wounded in the arm while serving an arrest warrant as part of an arrest team.,1
"An employee was troubleshooting a metal door when a gust of wind hit the door, causing it to strike the employee's head. The employee suffered head trauma.",1
"On April 23, 2016, at approximately 4:00 PM an employee experienced a crushing injury and fractures when he got his left forearm and wrist caught between rollers while troubleshooting calendar rolls on the extrusion line.  The injury required surgery.",1
An employee in the laboratory was stuck by a needle contaminated with a virus.,1
"An employee was performing maintenance on a skinner machine when his right hand came in contact with the skinner blade, amputating the third fingertip above the joint and below the nail cuticle.",0
A client at a group home became violent and charged an employee. The employee was knocked to the ground and suffered a fractured knee.,1
"While exiting a crane on a vessel, an employee slipped on the ladder and hit his head on the railing, requiring hospitalization.",1
"An employee was operating a sheet metal bender when a part became lodged in the machine. When the employee attempted to remove the part, the trolley that moved it through the machine hit the employee in the leg, breaking the left tibia.",1
"An employee was changing a projector bulb when the bulb shattered, the glass caused a facial injury that required hospitalization.",1
"An employee was unloading a metal rafter with an overhead traveling joist crane when the crane's clamp caught the edge of the rafter, causing the crane to tip over onto the employee. The employee suffered a broken right leg.",1
"An employee was climbing a ladder to access a storage area above an office unit. The ladder slipped from under the employee, and the employee fell approximately 6 feet to the ground below, suffering a fractured rib and clavicle.",1
An employee suffered a broken right ankle and twisted right hip after tripping and falling over a power cord.,1
"On 4-25-16, an employee fell through a floor opening between two joists on the second floor while attempting to glue the subfloor down.",1
"While pushing a piece of track on a ride, an employee's left pinky finger was caught between two pieces of the track, amputating the fingertip.",1
An employee's hand was caught in a machine.,0
"On April 25, 2016, an employee was attempting to straighten a crooked board on the trimmer machine when his right ring fingertip was pinched and amputated between two boards.",0
An employee was cutting a hole for an exhaust fan when the saw kicked back and lacerated his left big toe.,1
"An employee was pulling a piece of duct work when the piece of duct fell onto his arm, severely cutting his wrist and requiring overnight hospitalization.",1
An employee was taking a bumper off of a spotter tractor and the employee's finger got caught between the bumper and the vehicle body causing a fingertip amputation.,1
"An employee fell through the roof to the concrete floor, requiring wrist surgery.",1
"Employees were setting up pipe slips and the well-head ring needed to be centered. The injured employee was attempting to center the ring on the bottom of the flange. When the well flange came down, it caught his right pinky finger and smashed it at the joint. The finger was surgically amputated.",0
"An employee fell about 10 feet while descending a ladder, suffering fractures.",1
An employee was pinned against a steel pen by a driver backing up her vehicle. The employee suffered crushing injuries that required hospitalization.,1
"An employee was attempting to clean the glue eye on a paper-covered wire machine when his left ring finger was pulled into the machine, amputating it. The machine was unguarded at the time of the incident.",0
"While an employee was cleaning a facility, a high-pressure water lance was accidentally activated. The lance shot forward and pierced through the flesh of his right forearm.",1
"An employee was cutting down trees for the sawmill.  When he cut down a larger tree, it fell onto a smaller tree that then bowed over. The employee went to cut the smaller tree and it sprung back, hitting his left leg and breaking it below the knee. He was hospitalized and had surgery.",1
An employee was using the pop-up saw to cut scrap lumber into smaller pieces when the saw blade amputated her right thumb at the first knuckle.,0
"An employee was operating a saw when a reel of product fell off the stand and crushed the employee's finger, breaking a bone and cutting it.",1
"While lifting a patient in the bathroom, an employee fractured her back.",1
"At about 5:00 a.m., on April 25, 2016, an employee fell approximately 15 feet into the pipe shop basement while removing spill iron from the back of a casting machine. The employee was hospitalized with a broken right hip and right wrist.",1
"While he was operating a forklift, an employee's left leg was caught between a guardrail and the forklift, fracturing his left foot.",1
"While operating a carding machine, an employee attempted to clean the card. The machine caught his finger, amputating it just below the fingernail.",1
"An employee was setting up seine equipment to harvest fish from a pond when his hand was pulled into the chain and sprockets, injuring two fingers on his left hand.",1
"The employee was operating the plastic compounding extruder and completing a screen change. When the plastic built up pressure, it came out of the screen change burning the employee's left forearm.",1
"An employee was walking down the hall to lunch, tripped and fell fracturing the right hip.",1
"On April 25, 2016, an employee's right hand was seriously injured when pulled into the smooth mill machine rollers, requiring hospitalization.",1
"When an employee turned around while inspecting parts at the foam conveyor line, she suffered sharp pain in her lower back.",1
"An employee was walking down a flight of stairs when she tripped and fell into a band saw blade, cutting her hand and breaking her thumb. She was hospitalized.",1
"As an employee was removing a tube from a box while standing on a stair ladder, the box came off the shelf, causing the stair ladder and employee to fall 9.5 feet to the lower level. The employee landed on a box and broke his left hip, left wrist, and several left-side ribs; cut his spleen; and fractured his back vertebrae.",1
"An employee was trying to pull down a section of drilling pipe from the back of a truck when one of the pipes fell down and pinched his right ring finger, amputating it between the first and second knuckles.",1
"On April 25, 2016, at about 6:15 am, an employee fell against a parking lot curb while coming down some stairs. The employee suffered a broken arm and possibly a broken leg. The employee was admitted to the hospital for surgery.",1
An employee was a cutting a form board with a circular saw. The saw jammed and kicked back cutting the employee across the chest.,1
"An employee attached a counter-weight to a chain that was being adjusted. The employee's glove was then caught on the chain and pulled into the sprocket, amputating the employee's right index fingertip.",0
"An employee tripped and fell over an extension cord in the office, suffering a fractured hip.",1
"While an employee was trying to lift a dock plate, the dock leveler fell on his right foot, injuring two toes.",1
"An employee was using a power wash to clean a rebuilt gas compression unit when a flash fire occurred. The employee sustained 2nd degree burns on the hands, face, neck, and ears.",1
"On 4/26/16, at approximately 5:15 AM, an employee was using a pneumatic chipping gun to break up hardened mortar inside the mortar mixer. When he connected his chipping gun's quick-connect hose to the airline, he accidentally hooked it to an oxygen line, which was not properly labeled.  While he was operating the chipping gun with oxygen instead of compressed air, a fire broke out inside the tool and enveloped his right arm, face, and neck. He suffered second and third degree burns to his arm, and first and second degree burns to his face and neck, requiring hospitalization.",1
"An employee had just completed residential roof tile work. While throwing debris to the ground close to the edge, the employee fell 20 feet to ground level. The employee suffered left shin, left ankle, and right ankle injuries, requiring surgery.",1
"An employee was helping to lower metal sheets into place for ground stability when the wind caught one of the sheets, causing it to strike the employee's leg. The employee suffered a broken tibia and fibula.",1
An employee suffered finger amputations while operating a bender machine.,0
"An employee stumbled and fell while descending a flight of stairs, fracturing the lower leg.",1
An employee fell approximately 13 to 15 feet while descending a ladder from the roof where workers were painting. The employee suffered multiple fractures in the left wrist.,1
"An employee was cutting metal when the outer steel fell, amputating the third finger on his right hand.",1
"An employee was making deliveries from a flatbed trailer. As he was climbing down the attached ladder, a weld broke and he fell backward onto the hard surface of the lot, lacerating his head and left ear and fracturing his spine. He was hospitalized overnight.",1
An employee was lifting a tire onto another tire when he felt pain in his neck. He was hospitalized with a neck injury.,1
"While checking a car, an employee was struck by another vehicle being driven by a coworker. The employee was pinned between the car and the building, suffering a fractured pelvis.",1
"An employee was working near the slit coil packaging line when his left index finger was caught between the powered conveyor belt and a 4,000- to 6,000-pound roll of steel, amputating the fingertip.",0
"An employee was coming down a fixed ladder when the right and left grab rails broke. He lost his balance and fell 11 or 12 feet to the lower roof level, breaking his left arm above the elbow and requiring hospitalization.",1
"While disconnecting a steam fitting from a railcar, an employee suffered thermal burns to the hands/arms from hot water that released from the fitting.",1
"After greasing equipment, an employee fell while descending metal stairs, breaking a shoulder and wrist.",1
"On April 26, 2016, at approximately 9:30 PM, an employee was spinning a non-energized rotary press by hand to clean excess oil with a rag. The rag was caught in the spinning press, pulling the employee's hand toward the punches. His right middle fingertip was amputated by the downward punch.",0
"An employee was installing cable and telephone wire from a ladder. While descending the ladder, the employee stepped on a drill bit attached to an electric power drill. The drill bit impaled the employee's calf muscle.",1
"An employee was ascending a ladder, supporting himself with a grounding L-bracket, when he fell. He struck the concrete floor and suffered cuts and abrasions, requiring hospitalization.",1
"On April 26, 2016, at approximately 4:00 p.m., an employee was adjusting the brush table, which is part of the equipment that loads buns into bags. To adjust the brush table, the employee loosens a lock bolt, slides the brush table forward or backward, and retightens the lock bolt. While adjusting the brush table with his right hand, the employee's right index finger was pinched between the pusher on the bagger and the brush table, amputating the fingertip.",0
An employee was struck by a vehicle while setting up a work zone on a state highway. The employee suffered rib fractures and a punctured lung.,1
A maintenance employee was changing out a roll of plastic film on the overwrap machine when his right forearm was caught and crushed between the rollers.,1
"An employee slipped and fell to the ground of the shop, cutting his head and left ear.",1
"On Tuesday 4/26/16, at about 1 PM, an employee was installing a control panel on a cooling tower. The employee dropped his screw driver and it rolled under the cooling tower. When the employee knelt down to retrieve the screw driver, his knee landed on some wire debris. He required surgery to remove the wire debris.",1
"An employee was collecting debris at a construction site when a large piece of clay came off the debris and hit the employee's left shoulder, lacerating it.",1
"On April 26, 2016, an employee was standing on a rolling ladder/stairway to retrieve merchandise from overhead storage. The employee fell approximately 8 feet off the ladder to the floor, suffering a broken shoulder, elbow, and hip.",1
An employee was using a hammer to clean accumulated material from rollers on a conveyor. The hammer slipped and his arm was caught between the rollers. His arm broke and required surgery.,1
An employee was hit by a falling skid.,1
An employee was mowing the grass using a hover mover. The employee slipped and struck his foot with the mower resulting in a severe laceration to his foot.,1
An employee was operating a machine. The employee contacted the machine blade and lacerated the right hand/wrist.,1
An employee fell five feet from the loading dock to the ground and fractured two ribs.,1
"An employee working in the maintenance shop was adjusting the bolster of a hydraulic press. While the employee was attempting to align the bolster pinhole with a pinhole in the press frame, the bolster came down and amputated the employee's right index fingertip.",0
"An employee was walking between the parking garage and the entrance when the employee tripped and fell, suffering a broken kneecap and elbow injuries.",1
"On April 26, 2016, at approximately 6:00 p.m., an employee was changing a filter basket that removes fines from the alkaline cleaner. The employee unscrewed the lid and was struck by hot water and detergent (sodium hydroxide mix) under 26 psi, causing second and third degree burns to his upper torso, arms, and back. He was wearing a hard hat, eye protection, hearing protection, boots, and nitro gloves at the time. Chemical resistant clothing was not worn, and lockout/tag-out was not performed, while the filter was being changed.",1
"On or about 4/27/16, an employee was being trained to operate a powered pallet jack. The employee lost control of the pallet jack and exited the platform. His leg was pinned under the platform of the pallet jack between a racking system, and he was hospitalized with a broken foot.",1
An employee's right-hand middle finger was caught in a shackle in the live hang area and had to be surgically amputated.,1
"While braking parts on a press brake, an employee's right index finger was caught between a part and the upper die. The fingertip was amputated at the nail.",0
"An employee was attempting to enter the attic area of a home to conduct an inspection. The employee's ladder slipped from position, causing him to fall 10 to 12 feet to the ground, injuring his vertebra and left heel.",1
"An employee removed state bolts from one of two supporting flanges while working on railing. Both flanges, as well as the equipment they supported, then collapsed on the employee. The employee suffered four broken ribs and a broken tailbone and pelvis.",1
"An employee was run over by a tractor while filling a nurse tank, suffering a pelvic injury.",1
"An employee was attempting to turn off the conveyor using the control sequence lights when his left glove was caught and pulled into the chain and sprocket, resulting in a left index fingertip amputation.",0
An employee's ankle was crushed by a forklift.,1
"An employee's mail satchel became caught on a railing, causing him to miss the bottom step of a staircase and herniate a disc in his back.",1
"An employee was walking in the facility lot when a driver backed up and pinned the employee between a tractor and trailer. The employee suffered a pelvic fracture, requiring surgery.",1
An employee was helping a coworker lift a 200-pound oven onto a table when his right index finger was pinched and amputated to the first knuckle between the table and the oven.,1
"An employee ran to retrieve an at-risk patient as he was leaving the premises. She fell down on the floor, bled from her mouth, and broke her right hip. She was hospitalized.",1
"An employee was installing a sign while on a 6-foot fiberglass ladder. He stepped off the ladder and onto a stack of water cases. The stack caved in, and the employee fell down, head first, to the concrete ground, suffering a head injury.",1
"An employee was walking in a hallway, slipped, and fell, breaking the left hip at approximately 5:00 PM on April 27, 2016. The employee was admitted to the hospital for surgery.",1
An employee was walking down the hall when her foot caught the floor causing the employee to fall on her left knee and right arm. She broke her knee and was admitted to the hospital.,1
An employee closing a sliding door on a sausage production process pinched their finger between the door and another component causing an amputation of the left ring finger at the first joint.,0
An employee was driving a stand-up forklift. Their left foot was crushed after becoming caught between the forklift and a column.,1
"On April 28, 2016, at 1:20 PM, an employee was using a router table to notch several small pieces of wood. The employee was moving the pieces of wood from left to right. The wood kicked back, allowing the employee's fingers to enter the bit.",0
An employee's fingertip was amputated while he was using a press brake.,1
"An employee was wiping a roller with a rag when the roller pulled the rag and the employee's right hand in, breaking skin and causing lacerations.",1
"An employee was removing a jam under the pusher bar when the bar came down on the employee's arm, pinching and severely bruising it. The employee required surgery. The machine was not locked out at the time of the incident.",1
"An employee had just parked and exited his forklift to look for parts. When he stepped out from behind his forklift, an oncoming forklift ran over and crushed his right foot.",1
An employee was inspecting products being removed from a truck. The truck started to roll away while he was standing with one foot on the truck and the other on the loading dock. He fell and fractured both legs.,1
"A crew was setting a steel plate on the ground using a backhoe. The plate became loose and fell on an employee's lower left leg, causing three fractures.",1
"On April 28, 2016, at approximately 8:22 a.m., an employee was using a butchering knife to remove the inner and outer shank from a ham. While she was manually turning the meat, the knife came in contact with her left arm above her personal protective equipment, causing a deep laceration and puncture injury.",1
"An employee was positioning steel casing with a synthetic web sling. As he removed the sling from the casing, the casing shifted and pinched his left middle finger between the casing and the clamp set to receive the next piece, partially amputating his left middle fingertip.",0
"An employee was installing a torque arm onto a wind turbine gearbox on the ground. While he was attempting to insert the pin into the bushing, the pin dislodged and allowed the 50-pound torque arm to drop. The employee attempted to catch the torque arm, and his right thumb tip was caught in the pinhole as the arm fell to the ground, amputating thumb flesh (no bone).",0
"While moving a food tram from one location to another, an employee's right gloved hand became caught in the door, amputating the middle fingertip.",0
An employee was struck by a forklift transporting materials while controlling traffic at a construction site. The employee suffered fractures to lower extremities.,1
"While unloading light pole foundations from a truck, an employee fell off the truck and broke his wrist.",1
An employee lost control of a powered industrial vehicle and attempted to dismount the vehicle as it made contact with a stationary object. The employee's leg broke when it was caught between the vehicle and the object.,1
"While an employee was operating a rider pallet jack, centrifugal force caused the machine to rotate, catching his left leg between the machine and a rack storage unit. He injured his left foot/ankle and required surgery.",1
"An employee was installing 14-inch pipe into a new pipe rack.  The employee's right pinky finger was caught between the pipe and the structural I-beam, amputating the fingertip.",0
"An employee was servicing and troubleshooting a generator when a moving part became energized. The employee's hand was caught by the moving part, causing injuries that required surgery and hospitalization.",1
"On April 28, 2016, at 12:00 p.m., an employee slipped on a wet tile floor and broke a femur bone, requiring hospitalization.",1
"On April 28, 2016, at approximately 1:10 p.m., a maintenance employee was repairing a thin film evaporator machine. While he was removing the rotor assembly, his left middle finger was pinched between a nut and metal belt sheave, amputating his fingertip.",0
"An employee tripped over a curb while delivering mail, injuring both legs and requiring surgery.",1
"On or about 4/28/16, an employee's left middle finger was amputated while he was transporting a die from a press to storage.",0
"An employee was operating a heat treat furnace. The employee's arm was caught in the furnace door as it closed, amputating it above the elbow.",1
"An employee was walking outside when a coworker backed a trailer into him, knocking him to the ground and running over his right leg.",1
An employee was repairing a winch with a ratchet wrench. Tension on the winch caused it and the wrench to spin. The spinning wrench struck the employee's right lower arm and fractured it.,1
An employee had his left forearm leaning against a pipe for support while making a weld. Slag became wedged between the pipe and his protective leathers allowing heat to radiate through the leathers. The employee suffered second degree burns to his left forearm.,1
An employee was injured when a load of pallets fell onto the employee's foot resulting in amputation of the foot.,1
"On April 28, 2016,  at 8:20 am, an employee was raising a cope pattern with a hoist to place under a drag plate. His hand was under the plate when the pattern fell on his left pinky fingertip.",0
"While pulling glass off a conveyor, an employee mis-stepped, slipped, and ran into a wind box, lacerating his lower leg and requiring hospitalization.",1
"An employee was sitting on a stool at the computer and bent over to plug in a charging cord. As she did, the stool rolled out from underneath her and she hit the ground. When she hit the ground, she heard a loud pop coming from her hip. She was hospitalized with a broken femur bone.",1
"An employee was monitoring the plastic 2-liter bottles on the conveyor when his gloved hand was caught in the feed drive sprocket. His right-hand fingers were pulled into the sprocket, amputating his pinky and fourth fingertips.",0
"An employee was using a lift to reach items above the floor in a warehouse. As the lift was being lowered, a ring on the employee's right pinky finger was caught on an object outside the lift. The finger was amputated.",0
An employee was attempting to remove hamburger meat around the impact area of a hamburger patty press when his right middle fingertip was amputated by the press point.,0
"An employee was attempting to drill a hole in a metal plate with a drill press. As he held a piece of metal in his left hand, the drill press caused the metal plate to rotate with the drill bit and his hand to move with it. He amputated his left index finger and lacerated his left thumb.",0
An employee suffered a left index finger amputation and multiple left thumb lacerations when his glove was caught in the point of operation of a rotating drill press.,0
"An employee was cutting sheet rock in an auditorium when an existing wall gave way and fell on the employee, breaking his right arm and a rib.",1
The employee was on a ladder securing facia board to the roof. The employee fell to the ground and suffered multiple left rib fractures.,1
The processing machinery was turned off while the line employees were on break.   Employee #1 returned from break early and removed a guard from the auger at the barrel breader. Employee #2 returned from break and started up the machinery.  Employee #1 sustained amputations of the middle and ring fingertips on his right hand.,0
"On or about April 29, 2016, an employee was pressure washing the Fitz Mill machine. The employee used a chain hoist to lift the spout lid, and because the equipment was still running, the lid came back and struck employee. The employee suffered face fractures, a broken sternum, and cuts on the left wrist.",1
An employee was hospitalized from injuries received after slipping and falling down a flight of stairs on 4/29/2016.,1
The employee was conducting welding operations on the sub frame of a truck trailer. Hot sparks from weld spatter fell onto his shirt and the shirt caught on fire. The employee suffered first and second degree burns to his chest.,1
An employee's hand was broken while attempting to remove coal debris from between the journal and the table of the 2E coal mill base.,1
An employee was moving a forklift and stepped off. The forklift rolled backwards and pinned the employee between a pipe rail and the forklift. The employee suffered a pelvic injury.,1
"An employee was admitted and treated at the hospital after receiving a laceration to the right middle finger that required surgery while using a 3,500 psi pressure washer to clean the inside of a condensate tank.",1
An employee was operating a winch. The winch cable broke and the winch hook struck the employee. The employee sustained back injuries.,1
"An employee was walking on a clean, dry floor wearing a cast/boot on her left foot from a previous injury and fell fracturing two bones in her right foot. 
She was transported to the hospital and admitted for treatment.",1
"An employee was operating a pallet jack, lost control and pinned his right foot between the jack and a rack resulting in an open compound fracture of the right ankle.",1
"On April 29, 2016, at 5:45 PM, an employee, who was  wearing a harness while performing sheeting work, fell from a second story and fractured an eye socket and both hands and wrists. The employee was hospitalized.",1
An employee amputated the left index finger while helping a supervisor cut wood on a table saw.,1
"An employee was burned by hot condensate water while repairing a pump. The employee suffered burns to the arms, chest, and legs.",1
An employee sustained a thumb amputation while cleaning a bagel slicer.,0
An employee fractured and lacerated his right thumb while trying to straighten a billet with a crow bar. He was admitted to the hospital for surgery.,1
An employee was at ground level trying to remove a padlock from a trailer. Another employee backed the semi into the dock pinning the first employee between the dock and the trailer.,1
An employee was operating a forklift. The employee's arm was outside of the forklift and was pinned between a pole and the forklift.,1
An employee was decorating a cake. She turned and thought she was falling. She braced herself on a table with wheels. This caused her to twist and something popped in her left hip. She was hospitalized with a fractured left femur.,1
"An employee was cutting ""signature"" material on the trimmer. The blade of the trimmer came down on the employee's finger resulting in a right index fingertip amputation.",0
"An employee was working on a 10 foot step ladder, clipping clamps onto steel pipe stacked 4-high (14 ft. to top of pipes). The ladder tipped over and the employee fell 6' to 8' to the ground breaking the left tibia requiring surgery to repair.",1
"An employee was checking in vehicles at an RV park. As she exited the guard shack, she missed a step and fell approximately 2 feet to the ground and fractured her pelvis.",1
An employee was performing maintenance to a street light in a parking lot. The employee was cranking down on a come-along with a steel cable. The connector between the cable and the lamp broke causing the lamp to swing and strike the employee in the head. The employee was hospitalized.,1
An employee was electrically shocked when installing a 3 way switch.,1
"An employee had just finished mopping the floor. As they placed the ""Wet Floor"" sign they slipped and fell.  The result was a broken hip.",1
An employee was injured after his hands got caught in a conveyor belt on a platform located next to the dryer control room.,1
"An employee stepped on and slipped on a serving tray in the freezer, falling and breaking his ankle.",1
"As an employee pulled a patient bed through a doorway the employee lost their footing and fell, fracturing a wrist.",1
"An employee had unloaded cardboard from a pallet onto the carton erector machine. The employee was walking away from the task when a forklift operator traveling with a double stack of material bumped the employee, knocking the employee to the ground. The employee broke his left hip and was hospitalized.",1
An employee was walking out a door and was pinned between the door and a forklift.,1
An employee was walking in an aisle and was struck by a passing forklift resulting in injury to the right foot.,1
An employee was clearing debris from the line. The blower did not come to a complete stop and the employee's left hand was lacerated.,1
An employee's leg was pinned between two 1200lb rolls of newspaper.,1
An employee was grabbing a box from the overhead rack and stumbled down the ladder. His pinky finger was caught in the racking system and amputated.,0
An employee slipped on a wet floor and broke her arm.,1
"An employee was struck by his blast hose and sustained a laceration to the right forearm that required in-patient hospitalization on May 1, 2016.",1
"On 5/2/16, an employee suffered the amputation of the end of his right middle finger while working on a molding machine.",1
An employee was putting a trailer onto a hitch and caught a finger between the hitch and trailer resulting in the amputation of the fingertip.,0
"An employee was sweeping the floor, turned, lost balance, and fell resulting in a broken hip.",1
An employee was holding on to square tubing. A forklift approached and pinched the employee's finger between the square tubing and the forklift mast.,1
"An employee was disconnecting hoses after completing a radiator flush. Pressure had built up in the hose and hot radiator fluid was released onto the employee's arms, torso, legs and face.",1
An employee was feeding lumber on a conveyor belt of a horizontal band saw and amputated the third finger on the right hand.,0
An employee was picking up materials from the work floor with a forklift and lost control. The forklift went beneath a gravity conveyor machine catching his lower left leg between the forklift and the gravity conveyor machine causing bruises. The employee was hospitalized.,1
An employee injured their back when lifting a patient.,1
An employee's left forearm contacted an energized conductor inside an electrical enclosure resulting in electric shock and burns to the forearm and his palm.,1
"An employee was hospitalized, possibly for dehydration, on 5/2/2016, after participating in routine physical exercise.",1
An employee was refueling a crane at a customer site. The crane contacted high tension wires and the employee received an electrical shock.,1
An employee walked out of the kitchen and into the dinning room and slipped on the wet floor. The employee was hospitalized for a fractured patella.,1
An employee was ripping boards on a table saw when his right hand came into contact with the saw blade and was lacerated.,1
An employee suffered an amputation while operating a sheer press.,0
"An employee was clearing a jam while the planer feed rolls and pineapple rolls were still running. While he was holding the first board, a second board caught his finger in the split end of the board resulting in the loss of the right index finger above the first knuckle.",0
An employee was hospitalized after dust blew into her eye resulting in an infection.,1
An employee was standing on a mobile painter's scaffolding system and installing drywall. The scaffolding system tipped and the employee fell to the ground. The employee landed on his feet and fractured both heels.,1
An employee fell about 15 feet off an extension ladder resulting in a fractured back.,1
An employee was stung by an unknown insect on her face in one of the shipyard's storage buildings and experienced an allergic reaction. The employee was hospitalized for medical care and prescription medication.,1
An employee was building a trailer frame when an 18 inch tall by 30 feet long steel beam fell onto the employee's left leg and fractured it.,1
An employee received a partial amputation of the left middle finger when it was pinched between two wood blocks used as braces while attempting to use a pallet jack to lift a paper roll out of the corrugator.,0
The injured employee was operating an electric pallet jack in an aisle of the warehouse. Another employee who was operating a forklift struck the side of the pallet jack resulting in fractures to the injured employee's lower legs.,1
An employee was hospitalized for dehydration and other injuries due to physical training in preparation for fire season. Heat may have contributed to the injury.,1
"On or about May 2, 2016, employees were on a bucket lift servicing electrical transmissions.  An employee was changing dies in the press head.  When the motor started, the press head began to close, resulting in the amputation of a right hand fingertip.",0
An employee slipped/tripped and pulled the handle of a pallet jack to regain his balance. The wheel of the pallet jack ran over his left foot breaking it.,1
" The lime kiln flashed and an employee received second degree burns to the face, arms, and legs.",1
"On May 2, 2016, an employee was working in the area of the A-Line tumbler and sustained a laceration to the right arm above the elbow. The employee was hospitalized.",1
One employee was hospitalized when he fell from a roof during a home inspection and fractured his skull.,1
An employee was lifting a push lawn mower out of a truck and injured his back.,1
"An employee was cutting plate and pushing a 3/8 inch thick carbon steel plate under a shear when his index finger got caught in between the hydraulic stopper and the shear, smashing his index finger. The employee was sent to the hospital where his finger was amputated.",0
An employee suffered a hand laceration and broken finger when bolting in a blind with a combo and impact wrench.,1
An employee was disassembling steel racks when a piece of the rack fell and landed on the employee's right foot.,1
The employee was walking down concrete stairs and missed the last step and fell breaking a hip.,1
"An employee caught his left little finger on the edges of the bathroom door, amputating the fingertip.",0
"An employee was working the cash register when a privately-owned vehicle struck the building, entered the store and struck the employee.",1
An employee received a deep cut/laceration to the hand while operating a band saw.,1
An employee suffered an amputation to their right index finger down to the first knuckle when it was caught in an agitator shaft.,0
An employee was operating a crane to load material onto the hydraulic press brake. The plate clamp on the crane hook became disconnected. The employee's thumb on his right hand became caught between the metal plate on the crane and the press brake. The employee suffered an amputation of the thumb on his right hand as a result of the incident.,0
"An employee was welding on the access door to a 21,000 gallon tank containing an asphalt product identified as AC. 
A flame was observed, by the spotter, moments before a blast. The welder was blown into the air and landed on the platform. The welder sustained burns and was hospitalized.",1
"On May 03, 2016, an employee's fingertip was amputated after being pinched between an alignment stacking pin and the alignment hole of interlocking plastic pallets during material handling operations.",0
An employee was using a radial arm saw to cut a piece of wood. The saw cut the employee's left hand at an angle amputating his thumb and his first three fingers along with the end of his pinky finger.,0
"On or about May 3, 2016 an employee was using floor stripper when the employee slipped and fell into the floor stripper causing chemical burns to the employee's back, legs, and arms.",1
An employee was walking his preventative maintenance route on the wood chip conveyor belt. He reached a point where he heard a bearing making noise. The employee attempted to kick the roller with his right foot. When he kicked the roller he missed and his right foot and leg were pulled into the nip point between the roller and the conveyor belt.,1
"An employee suffered head injuries when the closed gate of a dump truck swung open, striking him in the head.",1
An employee fell from the left rear fender of the truck and landed on the ground breaking the right hip and injuring the right arm and forehead.,1
An employee operating a trim press received an amputation injury that resulted in the loss of all four fingers on each hand.,0
An employee experienced an asthma attack that may have been triggered by remodeling work performed at the work site.,1
An employee sustained lacerations to his foot while operating a lawn mower.,1
"An employee sustained lacerations to the ear, wrist and knee while moving glass.",1
An employee was lifting a battery out of a forklift with a hydraulic chain lift system and crushed his finger between a chain and the battery. The injury required surgical amputation of the finger.,0
"An employee opened a smoke house to supervise the water temperature and in doing so, boiling water was released onto the employee's feet.",1
"An employee was installing the ground rod. While using the ground rod pounder to pound the rod on the downward position, the rod went through his right middle finger resulting in amputation.",0
"The employee was relocating a workbench with another employee to a temporary location so the floor could be painted. While grasping the table from the sides, his left pinky was pinched between the table and a stationary guard rail which resulted in a partial fingertip amputation. ",0
A welder was working above the injured employee and dropped a welding rod which struck the injured employee's arm.,1
An employee was unloading string from a truck next to a hop farm.  The employee fell from the truck and broke their femur.,1
"While operating a hoist, the grab device slipped allowing the metal sheets to slip and pinch the employee's left middle fingertip. The employee was taken to the hospital and the crushed tip of the finger had to be surgically removed.",1
An employee suffered an avulsion on his right index finger while performing maintenance on a grass mower.,1
An employee tripped and fell on the carpet at the main entrance of the hospital.,1
The employee was using lifting chains while putting a submersible pump in place. The lifting chain caught a hold of his right leather glove and pulled a finger into the lifting chains. The right middle finger was pinched between chain and the fingertip was amputated.,0
An employee was using a pressure washer at an oil and gas site. The water pressure was approximately 1400 psi. He lost control of the hose and the wand struck the employee's left hand causing a laceration between the thumb and wrist. The employee was hospitalized overnight.,1
"An employee was being lifted in a forklift. During the lift, the basket tipped forward, pinching the employee's right fingers between the top rail of the basket and the forklift mast.",1
"On or about May 4, 2016, an employee cleaning the roll feed on a power press had the tip of his right pinky finger pinched between rolls resulting in amputation of the fingertip.",0
An employee was injured while selecting orders on an elevated platform.,1
"On May 4, 2016, at approximately 9:00am, an employee was hospitalized after falling down a set of stairs. The employee, and three other workers, were carrying a metal cabinet down the stairs. The employee slipped on the first step and fell, resulting in 3-4 fractured ribs.",1
An employee was operating a trim saw and broke his arm when it was caught in the roller.,1
"On May 4, 2016, at approximately 1:30 p.m., an employee sustained an amputation injury to the left hand index finger when the employee reached into the candy wrapping machine to clear out a loose piece of plastic wrap.",0
An employee was on a ladder to hang a banner on the exterior of the building. He fell from the ladder and suffered a broken forearm. He was hospitalized for treatment.,1
"An employee was injured while unloading a bumper car. The employee was struck-by and crushed-by the material being unloaded. 

The employee suffered a broken leg and a concussion. 

The employee was hospitalized and required surgery.",1
"An employee was attaching a banner to a building, lost his balance, and fell off the ladder. The employee suffered a broken wrist, loss of a tooth, and lacerations to his lip and head.",1
"The employee was climbing up a railcar ladder when he lost his balance and slipped 4 to 5 feet off of the railcar breaking a wrist, injuring his pelvis, and lacerating his forehead.",1
"An employee was washing up equipment located on a flatbed trailer in the wash bay. As the employee was moving around the equipment, the employee started to lose his footing and reached out and put his hand on the equipment. The equipment shifted pinching the employee's left ring finger between the two pieces of equipment. The finger was later amputated below the nail.",0
An employee was struck in the hand by a fitting which separated from a finished unit during a pressure test. The employee was hospitalized with a broken hand/fingers.,1
An employee was climbing down a fixed ladder and fell approximately 18 feet to the ground below and suffered a broken leg.,1
An employee was setting up a die in a press machine. The die slipped and pinched the left middle finger between the die and the press.  The left middle fingertip was amputated.,1
Employees were in the man basket of an articulating boom truck when a sudden movement caused the man basket to come in contact with the bridge. An employee sustained a broken nose and eye socket and was admitted to hospital.,1
An employee was retrieving shopping carts in the parking lot and was struck by a van resulting in a broken right leg.,1
An employee installing drywall fell from a mobile scaffold approximately 54 inches to the floor below and broke a hip.,1
An employee was on the forks of a forklift installing anti-pigeon spikes on the ceiling when his finger was crushed between the forklift and a beam.,1
An employee fell from a ladder and broke his ankle and heel.,1
An employee was choked by a patient while leaving a patient's room resulting in fractures to the throat.,1
A worker was engaged in concrete finishing activities on a new highway and fell 2.5 feet from a finishing platform landing on the concrete. The employee's left leg was fractured below the knee.,1
An employee slipped and fell while carrying product down the ramp of a delivery truck. The injuries sustained by the employee were a dislocated left ankle and a compound fracture in left leg.,1
An employee suffered a left index fingertip amputation while clearing a clogged grout pump.,0
Employees laid a pump down and prepared to put a blowout preventer on the well head when one of the rods fell from the derrick and struck the ground. The top of it struck the employee on the right shoulder and neck area.,1
"An employee thought that something was loose on the flat bed trailer, so he pulled off to the shoulder of the road. When he was getting off the trailer, he slipped and fell and broke his wrists. The employee was hospitalized.",1
An employee was standing next to the tubing waiting for the hydrotester to go down the hole and plug in the water hose when the hydrotester broke sticking the employee on the right forearm.,1
An employee suffered respiratory distress that appeared to be caused by paint vapors and was hospitalized overnight.,1
"An employee was unclogging a pump. While tightening the lid, the lid popped off and water at approximately 180 degrees splashed onto the employee's body burning his upper extremities. The employee received second and third degree burns.",1
"On May 4, 2016, at approximately 2:30 pm, an employee noticed that the (powders) raw materials were not going down easily through the mixing chamber (approximately 165 cubic inches) of an extrusion machine fitted with a rotating shaft ""rotor"" with a maximum speed of 100/500 rpm's. He attempted to clear out the material from the mixing chamber with a putty knife at different speeds (controlled/adjusted by the employee himself) beginning at 460 rpm, then down to 120 rpm, and then up to 130 rpm when his gloved hand (cloth) holding the putty knife was pulled in the mixing chamber. The knife was thrown out and when he pulled his hand out his right thumb and three other fingers on his right hand were amputated.",1
An employee used a wooden ladder and leaned it up against a handrail while attempting to work on an overhead light. The ladder slipped down and the employee fell onto the handrail resulting in an injury to his chest and abdomen area.,1
"On or about May 4, 2016, at 1:20 p.m., an employee was reaching to clean debris off of the laminator machine's chrome roll when the chrome roll turned and caught his hand between the chrome roll and the guide roll. His arm was wrapped around the chrome roll causing several fractures to the radius and ulna of his right arm. He was hospitalized for surgical intervention.",1
"An employee was using a table saw to cut a piece of build-up (countertop). While cutting the material, the employee's fingers came in contact with the saw blade.  The employee sustained serious injury including laceration and fracturing of the right forefinger and right middle finger.",1
"On May 4, 2016, an employee had his hand crushed in a hydraulic vise resulting in broken bones and lacerations. He was admitted to the hospital.",1
"An employee was stacking pallets when his finger was caught in between two pallets, amputating the fingertip.",0
"While holding a pipe by hand, an employee actuated a machine used to connect the pipe to a coupler. The employee's finger got caught between the pipe and coupler, amputating the right hand index finger down to the first knuckle.",0
An employee was struck by a roof jack on the left side of the face while working in a tank with a floating roof.,1
An employee was moving racks out of the smoke house when one fell onto his leg causing a laceration to the thigh. The employee was hospitalized.,1
An employee was using a manual power mower when he slipped going down into a ditch. The employee suffered a right second toe amputation when his foot went under the mower deck and made contact with the cutting blade.,0
"On Thursday, May 5, 2016, at approximately 12:15AM, an employee was severely burned when performing maintenance work on an aluminum furnace door. The employee suffered second and third degree burns to 20% of his body.",1
An employee was trimming a tree with a chainsaw. The chainsaw kicked back and cut the employee's left calf. The employee was hospitalized.,1
An employee operating an order picker unit was t-boned by another employee operating a second order picker unit. The injured employee was hospitalized and treated for a fractured hip.,1
"An employee climbed up a vertical fixed ladder to verify lengths of material in the loft and as the employee was coming down the ladder, he missed a step and fell approximately seven feet to the ground, injuring his hip. The employee was hospitalized.",1
An employee suffered a broken knee when helping another employee lift a pallet. Pallets underneath the pallet that was being lifted shifted and fell onto the employee pinning the employee to the ground.,1
An employee was shocked while changing light bulbs in the parking lot. The employee was hospitalized.,1
"On 5/5/2016, at approximately 6:00 AM while working on the 66-ton punch press, an employee sustained a partial amputation of his middle finger on the left hand.",0
An employee was doing roof repair and slipped and fell to the ground.,1
The employee was carrying a brake rotor. The brake rotor fell on his toe resulting in a laceration and fracture.,1
An employee was working an event making a miniature golf hole using a table saw. He cut his left index finger on the table saw. ,1
An employee suffered a fingertip amputation on the left hand index finger when the finger was caught between the saw blade and the housing.,0
An employee was cutting a piece of wood on the table saw and caught the side of his thumb on the saw blade amputating the left thumb nail. The employee was hospitalized.,0
The employee was positioning a pipe on a pipe straightener. His finger was caught between the pipe and the pipe roller resulting in the amputation of the right ring fingertip involving some bone loss.,0
"An employee climbed a tree and then fell 40 feet to the ground. The employee sustained a fractured pelvis, broken heel, broken ankles, a concussion and fractured vertebrae.",1
"An employee was walking along the pathway and got entangled in a safety strap, fell to the ground, and broke her leg.",1
An employee operating a sheet extruder received a laceration requiring 17 stitches to his left hand from the knife that cuts the edges.,1
An employee was wrapping meat using a deli meat wrapping machine. The machine fell onto her right leg causing a laceration.,1
"An employee was using the elevator when it failed, falling from the 3rd floor to the 1st floor. The employee was hospitalized with a concussion.",1
"On May 5, 2016, at approximately 6:30pm, an employee was injured after being cut by a mold carrier tray. With a guard removed, the employee reached into the machine and the machine pulled him in, resulting in lacerations to the arm and hospitalization.",1
An employee was operating an aluminum cutting machine. His pant leg was caught in the drive shaft resulting in amputation of his leg.,1
An employee fell on a sidewalk at a client site and broke her arm.,1
"Two employees were working on a scaffolding system that toppled over injuring both employees on May 5, 2016, at approximately 0930 hours. One employee fell directly onto a small structure near the scaffold and suffered a broken pelvis, shoulder, ribs, and wrist on his right side. The employee was hospitalized for treatment of his injuries. The second employee fell directly on the bare ground and suffered a small laceration on his leg. The second employee was treated and released.",1
An employee fell off a three foot ladder and broke his left arm. He was hospitalized for surgery to repair the fractured arm.,1
An employee's left ring and middle fingers were amputated when caught in the chain of a horizontal glass washer machine.,0
"An employee, who was driving a golf-cart, lost control and the golf cart over-turned, resulting in multiple injuries to his body.",1
An employee received a partial amputation after the finger was caught between the side of a chipper and a log that became dislodged.,0
"On 5/6/2016, an employee was sandblasting in the body shop. The sandblasting wand slipped and contacted the employee's left forearm causing a laceration. The employee was hospitalized.",1
"On 5/6/2016, an employee broke his left femur while installing a tire on an 18-wheeler. He used a torque wrench to tighten the lug nuts. The torque wrench slipped and the employee lost his balance, fell forward, and broke his left femur. The employee was hospitalized as a result of the injury.",1
An employee was cutting carcass with a brisket saw and lacerated his left hand and thumb.,1
An employee was working in the distillation building of a biofuel plant installing new piping. He was unbolting steel pipe to install a butterfly valve. A fire occurred and two employees were burned. One employee was treated and released. The other employee was hospitalized.,1
An employee was attaching a hydraulic coupler and sustained a puncture wound to the left index finger.,1
An employee was attempting to unjam material on an auger of the cuber when the machine activated and amputated two fingertips between the belt and the pulley.,0
An employee tried to stop a load from sliding off the forks of a forklift and was pinned between the building and the load. The employee suffered crushing injuries.,1
An employee was removing cookie packages from the conveyor belt when his finger was caught in the bridge of the conveyor belt and pulled under the belt of the machine. The distal phalanges (pinkie) were amputated. The incident happened on 5/6/16 at 8:45 AM.,0
"An employee was welding on a yoke and while un-chocking the yoke it rolled and fell off the table. The yoke hit the floor and rolled over again hitting the employee's left leg and pinning him up against the welding screen. A yoke is part of the closure on a large vessel. They are about 60 inches in diameter. They are in two pieces so the part that fell was only half of the yoke. The part of the yoke that fell weighs 1,320 pounds. Both bones in his left leg were broken at the ankle and a bone in his right foot that runs from the third toe to the ankle was also broken.",1
An employee entered the paint line washer and fell through a grate into the washer solution. The employee suffered severe chemical burns to both legs.,1
The employee was moving a piece of equipment from a wooden pallet to a storage rack. The sphere tool (250-300 lb. steel pipe) slipped. The employee tried to catch it and got his finger caught between the sphere tool and the rack. The right ring finger was amputated.,0
An employee was cutting a piece of galvanized pipe with a chop saw and amputated the tip of his left index finger above the knuckle.,1
"The employee was changing the forklift battery using a portable battery lift. The employee swung around and came in contact with another battery that fell onto his left foot, crushing it.",1
The employee was walking on the platform towards the exit side were the ladder was located. The employee tripped on the corner high beam and he reached out to support himself with the crane cable that was moving. His four left hand fingers were amputated by the crane cable and pulley.,0
An employee's fingers were amputated after they were caught in a mill mixing machine.,0
"An employee walking between buildings tripped and fell, breaking her right ankle.",1
"An employee was performing maintenance on an HVAC unit. While manually turning the pulley to install a belt on the unit, the employee pinched the left index finger.",1
"An employee was walking around the corner of the furniture department, tripped and fell breaking his humerus and radius.",1
An employee was repairing a plastic bag winder and amputated the right pinky finger.,0
The employee was climbing down off of a step ladder and lost his footing. He fell 16 feet off of the awning resulting in head and elbow injuries.,1
"An employee was working with a sealer for packaging shipments when it jammed.  The employee tried to clear the jam, triggering it to close, and burned the four fingers on his left hand, resulting in hospitalization.",1
An employee strained his back while trying to pick up a box of water.,1
An employee was walking near an operating bobcat skidder while supporting the load. The bobcat's track ran over the employee's left foot resulting in broken bones and soft tissue damage.,1
An employee's arm was caught in the motor of a cement mixing machine resulting in injury.,1
An employee was loading concrete onto the truck. The concrete shifted and struck the employee's leg resulting in ankle fractures.,1
An employee was operating an electronic pallet jack and crushed a foot against the wall resulting in fractures and damage to the ligaments and tendons in the foot.,1
"An employee was standing in a basket attached to a forklift. The lift lowered the basket to the ground and the operator disconnected the basket straps. The employee in the basket was attached to the forklift not the basket. As the lift drove away, the employee was pulled and fell out of the basket hitting his head and shoulder.",1
"An employee was installing an ice machine at a customer's location. While doing so, he bumped his left elbow on the machine and received a small scratch. The next day it started to swell and turn red. He was hospitalized for an infection in the wound.",1
An employee was hospitalized after falling from the bed of the truck while performing roofing work.,1
An employee was making a delivery to a customer. He went to pull the back roller door on the box truck and his left middle finger was caught in the groove of the roller door and smashed between the door latch and the truck bed. The finger was amputated.,0
The employee was troubleshooting a piece of equipment. The cylinder closed and amputated his fingertip.,0
An employee received a finger amputation 5/6/2016.,0
An employee was severely burned by steam/hot water during a maintenance check on a malfunctioning water pump.,1
"In the printing department, an employee's right hand, third and fourth fingers were amputated while operating a flexographic press.",0
An employee was cleaning a condenser coil. Kleen Coil (yellow) spilled into his boots burning his foot.,1
An employee sustained an amputation of the tip of his right middle finger while in the process of inspecting a pond filter basin. The steel door of the basin fell onto the employee's finger causing the amputation.,0
An employee's thumb was caught by the safe door when closing it. The pad of the employee's left thumb was cut off and could not be reattached.,0
An employee ingested degreaser that was placed in a cup and handed to him for cleaning the grill. The employee's esophagus was burned and the employee underwent surgery.,1
"An employee was walking on a rail car and fell off, breaking a knee cap and an elbow.",1
"Employees were tightening a ring on a steel drum when the ring slipped and a bolt came flying out, striking one employee on the side of his head, just below his hardhat.",1
A employee was hit by a car injuring both legs.,1
"An employee was exiting the break room and caught his right hand pinky finger in the closing door, crushing his finger.",0
The employee was holding a microphone when a football player collided with her. The employee suffered a broken leg.,1
An employee followed a suspected shoplifter out of the store and into a parking lot. The employee started taking pictures of the suspect's car as the suspect was pulling away. The suspect hit the employee with the car breaking the employee's left leg.,1
An employee was using a horizontal lathe and amputated the right thumb below the knuckle.,0
An employee was moving spare parts and caught a finger in the hinge/assembly part resulting in the amputation of the left ring fingertip.,0
"At the facility when an employee was loading a trailer with cream, the valve closed and amputated the left index fingertip.",1
An employee was working on a printing press and pinched a finger resulting in a fingertip amputation.,0
An employee was working his regular overnight security job when a person attempted to break in to a vehicle. The employee stepped out of his vehicle and approached the suspect at which time the suspect shot the employee in the left arm. The employee was hospitalized and needed surgery.,1
An employee was injured when his hand was caught between a belt and pulley on a CNC machine.,0
"An employee was cleaning a mixing bowl when the bowl motor was actuated. The employee suffered skull fractures, lacerations and soft tissue damage and was hospitalized.",1
"An employee was working inside an engine index cell and was standing in a pit approximately 2.5-3 feet below ground level. The employee went to move from the inbound part of the cell pit to an area between inbound and outbound. He stepped up and out of the pit, over guiderails, and onto a roller ball surface. His foot caught on the guiderail and he tripped and fell forward, fracturing his femur.",1
"An employee was delivering mail at a resident's address when the resident's dog exited the house. While trying to get away from the dog, the employee fell in a pond on the resident's porch, suffering a broken leg and compound fracture.",1
"An employee steering a stand-up forklift lost control of the lift and struck a racking system. The employee's lower left leg was caught between the forklift and racking system, contusing the left calf.",1
An employee's hand was struck by a clamp used to level roller coaster ledgers resulting in a partial amputation to the right pinky finger.,0
An employee slipped on a wet floor and fell breaking an arm.,1
"On May 9, 2016, at approximately 2:30 PM, an employee was carrying a loaded, 25- to 30-pound tool bag while descending permanent, inclined stairs. When he reached the sixth stair tread from the bottom, he lost his balance and fell, striking his right foot against the bulkhead beneath the stairs.  He fractured his right ankle and required surgery.",1
"On Monday, 5/9/2016, at 9:40 AM, an employee was using a pallet jack to unload materials from a vehicle with a lift gate when the load and pallet jack fell on his feet. He sustained a broken left ankle and a contusion to his right ankle, requiring hospitalization and surgery.",1
"While moving buggies on rollers, an employee's hand was caught between a buggy and the rollers, injuring the ring and pinky fingertips. The ring fingertip was amputated halfway down the fingernail.",0
An employee was performing maintenance work on a boiler and received second and third degree burns to the left arm and chest.,1
"An employee was injured and hospitalized after they fell 7.5 feet from a platform. The employee suffered a head injury, broken wrist, broken clavicle, bruised ribs and stitches to the ear.",1
An employee was operating the edge bander and amputated the right index finger.,0
"An employee was exiting a trailer on a pallet jack. A pallet got caught on the dock plate, flipping the employee from the pallet jack and onto the concrete warehouse ground, hitting his head. The employee was hospitalized.",1
An employee was securing the load with chains and cables onto the back of a wrecker when his foot got caught between the straps and chains causing him to fall off the wrecker. He was admitted to the hospital for treatment of a fractured hip and wrist.,1
"The employee was using a table saw to rip off a small section of a 12 foot long 2x2 when the employee caught his left hand in the blade, amputating the tips of three fingers.",0
An employee suffered lacerations to his head when it was caught in an elevator gate.,1
An employee was walking down the hall and attempted to change directions. The employee fell and fractured the femur and bruised the right shoulder.,1
"The employee was walking into the store and out of the rain to service the HVAC system, slipped and fell on the floor breaking a wrist.",1
An employee's right index finger was amputated after slipping and falling near equipment. The cause is unknown.,0
An employee was hooking lift cables to a precast concrete slab when he fell from the bed of the flatbed trailer onto the pavement and suffered a concussion.,1
An employee received lacerations to his head and numbness in his fingertips when he was hit in the head with a piece of scaffold component that fell approximately 15 feet. The employee was wearing his hard hat.,1
"An employee was climbing a job made ladder, lost his grip and fell approximately 15 feet to the concrete floor below sustaining injuries requiring hospitalization.",1
An employee was lifting a platform for cleaning. The chain that connects the platform to the conveyor belt that feeds tomatoes into the wash sink broke causing the platform to fall and sever his right thumb in multiple locations.,0
An employee was struck in the head by the overhead door and hospitalized as a result.,1
"On May 9th, 2016, at or around 3:45 PM an employee was exiting a MOD via a 10-foot ladder. The employee missed a step and fell. The employee was admitted to the hospital for treatment of compression fractures.",1
"An employee was trimming a limb of the tree in order to be flush to the trunk while he was ten feet high on the tree. While the employee was maneuvering to get the tasks done, the chain saw contacted his lower left leg resulting in a laceration that required staples.",1
"While running a sprint, an employee broke a leg, requiring hospitalization.",1
An employee suffered a fractured skull and collar bone when he fell from the navigator ladder to the sales floor. He was in the process of making room for more merchandise.,1
"On May 09, 2016, an employee was helping to secure a truck onto a trailer to be towed away when he fell approximately four feet from the trailer to the ground below resulting in three broken ribs and a punctured lung.",1
An employee slipped and fell while pushing a trash can in the kitchen area. The employee suffered a fractured right hip and back and was admitted to the hospital.,1
"On Monday, May 9, 2016, at approximately 3:00 PM, an employee was exiting the facility when he tripped and fell down the front steps. He sustained head and elbow injuries and was hospitalized.",1
"On 5/9/16, an employee was clearing a paper jam from the feed wheel of a Peerless paper machine. When he raised the scrap shoot/shear, it fell down and amputated his right middle fingertip.",0
"On 05/09/16 at about 12:00 p.m., an employee was hit by an aluminum beam that fell, striking the employee's face and head. The employee was hospitalized.",1
"An employee was standing on a garage truss when a load was placed next to him, causing the truss to collapse. He fell and required hospitalization.",1
"An employee tripped on a floor mat, fell, and struck the door as she was entering the gift shop. The employee suffered a broken right arm and was hospitalized to undergo surgery.",1
"An employee was greasing the motor and drive bearings inside the main air handler. He lost his balance and caught his finger in the slow turning pulley and belt, resulting in amputation of the fingertip.",1
"An employee was walking down the stairs when she missed the last step and fell to the floor, fracturing her left ankle and requiring surgery.",1
"An employee was struck while walking behind a forklift, suffering multiple fractures to the left leg below the knee.",1
"An employee fell off a portable three-step ladder that became unstable, breaking his right hip and requiring surgery.",1
"An employee was painting on the roof when he slipped and fell to the ground breaking his pelvis, injuring his back, and bruising a lung.",1
"At approximately 5:40 PM, on May 10, 2016, an employee was preparing to change a mold out from a machine. The employee was removing bolts from the new mold, which was held by a forklift, when the mold slipped. The employee's left index and middle fingers were crushed between the roughly 300-pound mold and the arm of the machine, requiring hospitalization and surgery.",1
"An employee was operating a lawnmower when he tripped over an object. As he fell backwards, the still-running machine ran over his right foot. The blade amputated the tips of three toes.",0
An employee's right knee and left foot were struck by a forklift while she was crossing an aisle way. She suffered a fractured patella.,1
"On May 10, 2016, at 8:00 p.m., an employee was collecting wood that was cut by a saw and coming off a conveyor when the conveyor jammed. When the employee attempted to clear the jam, the conveyor amputated the employee's left ring fingertip.",0
An employee was changing a pulley on the feed roller conveyor. The employee's right index fingertip was caught in the pulley and amputated.,0
"An employee was investigating an air leak in a drill machine when the machine cycled and injured the employee's hand, breaking a finger and causing ligament damage.",1
"An employee was attempting to remove the teeth from the bucket of an excavator when a piece of metal flew off, striking the employee in the neck. The employee suffered internal bleeding and required surgery.",1
"An employee was cleaning the beam saw/panel saw area when he was caught in the machine, sustaining serious lacerations to his neck and arm.",1
An employee was operating a grinding machine when the machine amputated his left-hand index finger to the first knuckle.,0
"An employee returning to the store from her vehicle tripped over a curb and contacted the ground, breaking her left wrist. She required surgery and hospitalization.",1
"An employee heard buzzing from unspecified electrical panels in the back of the store. While inspecting the buzzing noise, she received an electric shock from a remote timer light switch that had unguarded, live electrical parts. She was hospitalized.",1
"An employee was attempting to close a step ladder when his right ring finger was caught in a pinch point, amputating the fingertip.",0
"An employee was using an order picker to select cartons from an elevation when he fell and struck his cranium on the walking surface, requiring hospitalization.",1
"An employee's hand was on top of a gear box when the spreader of a crane smashed his left fingers, amputating his left index finger and fracturing his left middle finger. He was hospitalized.",1
"On 5/10/16, at approximately 0900 hours, an employee was climbing a ladder that was set up on a meter pole when the pole began to crack. The employee began descending the ladder and the pole broke. The employee fell approximately 15 feet from the ladder to a stone/grassy surface, shattering the L2 vertebra and requiring hospitalization.",1
"An employee was standing between a re-coiler machine and another machine when the employee's glove was caught by the re-coiler. The employee's arm was pulled into the machine and was pinned, requiring hospitalization.",1
"Two employees were setting a steel beam that was attached to the choker of a crane. The crane operator picked up the beam and started cabling up. As the beam started rising, it became caught on part of the structure. The crane continued to pull up. The beam broke loose from the structure that it was caught on and swung free, striking the two employees. One of the employees was hospitalized with fractured ribs, pulmonary contusions, and a collapsed lung.",1
"An employee repairing teleworking communication lines fell approximately 12 to 13 feet from a ladder to the concrete below, suffering a major head injury that required hospitalization.",1
"An employee was cleaning roll former dies when his rag became caught in the moving dies. His left hand was then pulled into the dies, amputating his middle finger to the second knuckle.",0
"On or about May 10, 2016, an employee was paving a roadway. While stepping off a paver, he fell on the hot asphalt, breaking his leg and burning his arm.",1
"An employee was preparing to replace a gear box while his fingers were wrapped with a paper towel. A chain near the gear box caught the paper towel and pulled his fingers into an in-running nip point, amputating his right index and middle fingertips.",0
"On May 10, 2016, at approximately 3:30 p.m., an employee was observing the trim saw during a mill shutdown. He was standing on a 4-foot-wide catwalk, located on the green chain side of the trim saw, when he lifted a top-hinged steel door to gain access to the saws. Before he could clamp the door open, the door slipped and came down, striking his head. He was knocked over the 36- to 42-inch railing and fell 12 feet to the concrete floor below. The employee was hospitalized for fractures to the wrist, eye socket, and kneecap.",1
"An employee was disassembling a roughly 55-pound gusset plate because it was assembled incorrectly. As he removed the last pin, the plate started to fall off of the table. He tried to catch the plate, and his left-hand ring finger was caught between the plate and a section of another metal piece. His left ring fingertip was amputated without bone loss.",0
"At 9:00 AM, on 5/10/16, an employee and a coworker were preparing to replace a malfunctioning gauge board on an asphalt tank. They transferred contents from the malfunctioning tank to another tank and shut down the malfunctioning tank. Every energy source was off/locked out. Using an impact wrench, the employee began loosening/removing the bolts holding the manway cover on the tank. After he loosened several bolts, some hot liquid asphalt splashed out from behind the cover onto the concrete pad and onto his hands, arms, and legs. He suffered second and third degree burns to both arms, hands, and legs, requiring hospitalization and surgery.",1
"An employee was driving a forklift to unload vegetables from a trailer. The trailer pulled away from the loading dock while the employee was exiting, causing the employee to fall and suffer a rib injury.",1
An employee's right index fingertip was amputated when it was caught in a projector transport unit's drive belt pulley during a PM inspection.,0
"An employee was on a 9-foot wall, supervising work activities, when he tripped and fell to the ground. He fractured his shoulder and hip, requiring hospitalization.",1
"While swabbing operating equipment, an employee's sleeve was caught in the conveyor, pulling the employee's left arm into the machine. The employee's arm suffered a compound fracture and skin removal.",1
An employee's left index finger was crushed and partially amputated while the employee was operating a metal shear.,0
"On or about May 10, 2016, at approximately 2:15 p.m., an employee was walking by the fax machine when she stumbled and fell, fracturing her left hip. She was hospitalized.",1
The employee was prepping in the bakery department. She opened the freezer door and sprained her lower back when she turned.,1
An employee was setting up a punch press when his right index fingertip was caught and partially amputated between two pieces of steel.,0
"While operating a piece of equipment to cut metal stock, an employee's right index finger was crushed, requiring surgical amputation.",0
"After dismounting a pallet jack, an employee was injured when the piece of equipment continued to move, trapping his foot.",1
An inmate was slicing onions with a vegetable slicing machine when he amputated his left middle fingertip and lacerated the side of his left index finger.,0
"An employee was mowing the lawn of a commercial property when he saw an obstruction on his path. He picked up a piece of rebar steel from the ground, placed the rebar on the mower's floor deck, and continued mowing the lawn. Due to the mower's movement and vibration, the piece of rebar fell and struck the tire of the mower, then deflected back and hit the employee's shin, causing a minor laceration and contusion on his leg. He was hospitalized and required surgery.",1
"Two employees were working together to align a PVC vent pipe. When one of the employees used a 2-pound hammer to strike a PVC wedge, the PVC wedge fractured, and a piece of the wedge entered the right side of the employee's eye, past the safety glasses.",1
"On or about 5/11/2016, an employee was delivering mail when he noticed smoke coming from a resident's garage. He stopped and noticed a gas can on fire and two kids in the garage. He told the kids to get out of the garage and to kick the gas can out. One of the kids kicked the gas can out of the garage. The can hit the employee and splattered gas on him. The gas caught on fire and caused third degree burns to both of his legs.",1
"An employee slipped and fell off the second story of a roof during tear-off activities. The employee hit the first story, then rolled and fell on the ground, sustaining a broken hip/pelvis.",1
"An employee was feeding a patient when she turned and lost her balance. She fell to the floor and landed on her left knee, fracturing her kneecap.",1
"An employee was delivering product from a truck trailer to a local restaurant using a dolly and ramp. He fell to the concrete ground and shattered his ankle, requiring hospitalization and surgery.",1
"While cutting pork roast on a meat table saw, an employee's left index finger was amputated from the second knuckle to the fingertip.",0
"An employee was grinding on a structural handrail for a work platform with a grating floor. The employee lost control of the grinder, which lacerated and fractured his left index finger. His left index fingertip was surgically amputated.",0
An employee suffered an amputation.,1
"An employee loaded a patient in a wheelchair into a passenger van. The van then drifted down the driveway and struck or ran over the employee, causing liver and lung damage.",1
An employee was walking back to a truck that was backing up. The driver never saw him and ran over his right foot.,1
"An employee was transporting a container filled with metal chips using a forklift. When he attempted to pull the handle on the hopper, his left finger was crushed between the handle and the forklift mast, resulting in a partial amputation halfway through the fingernail.",0
"An employee was preparing a trailer to load a roller that was on a slope. A coworker was in control of the roller and left it unattended. The coworker set the emergency brake, but the emergency brake was not working properly. The roller then began to roll slowly and struck the employee, who suffered a leg/hip dislocation.",1
"An employee was unloading a steel plate from a truck when the plate struck a steel half cylinder, causing the cylinder to fall and strike the employee's lower left leg. The employee suffered a broken left tibia and fibula.",1
"An employee was unloading propane tanks from a delivery truck. As the employee dismounted the truck's lift gate, his ring finger was caught and de-gloved in the channel of the lift gate.",1
"An employee was driving a forklift over rough terrain when the forklift tipped forward, causing the forklift frame to strike the employee's head. A hard hat and seatbelt were not worn at the time of the incident.",1
An employee was unclamping a steel beam when the beam fell over and struck the employee. The employee was hospitalized with injuries to the right hand and both lower legs.,1
"An employee was tailing in a piece of pipe while the drill rig was picking up the other end. The pipe swung into the derrick of the rig and caused the other end of the pipe to flip up, striking the employee in the mouth.",1
An employee fell and broke his pelvis while performing roofing work.,1
The employee was kneeling down in front of a control cabinet for approximately 20 minutes installing and rewiring a relay device. The employee could not get up. The employee was hospitalized for a fractured femur at the hip joint.,1
"An employee and a coworker removed the die from a punch press to clear a jam. After the die was put back in the machine, the employee attempted to clear out some debris. The die then dropped on his left thumb, amputating it.",1
"While an employee was attempting to unstop a jammed hopper, the still-rotating blades at the bottom of the hopper amputated the first two fingers on his left hand.",0
"An employee was using a spud wrench to loosen bolts on a steel form panel. The nut was on very tightly, so he placed his foot on the wrench to loosen it. He lost his balance and the point of the wrench went up through the sole of his work boot, puncturing and fracturing his right foot.",1
"An employee was operating a pallet jack to deliver a stack of empty pallets. While making a right turn, he lost control of the pallet jack. As he quickly exited the vehicle, his lower left leg/ankle was caught between the pallet jack and a support post. He was hospitalized with a broken left ankle.",1
"Two employees were fixing a sewer system at the intersection. The first employee went down into the sewer to relieve a blockage. He finished and proceeded to climb the 9-foot ladder up the sewer hole. Just before he was able to reach the top of the hole, he collapsed and fell down the ladder. The second employee went down the ladder to rescue the first employee and put a hoist rope around him. While the first employee was being hoisted up the hole, the second employee succumbed to the gases that were in the sewer and collapsed. One of the employees was hospitalized.",1
An employee was changing the knives on a veneer lathe when two of his left-hand fingers were severely lacerated.,1
An employee was using a strapping machine to band wood together when two of his fingers were partially amputated.,0
An employee was preparing to move steel tubing when a stack of steel rods shifted and pinned his lower leg. He was hospitalized and required surgery.,1
An employee climbed a dumpster ladder to check how full it was when he fell backwards. He tried to catch his fall and injured his left wrist.,1
"An employee was burned by 190-degree water while setting up a clean-in-place system. All valves were not closed during setup, and water sprayed out of a partially closed secondary valve. The employee suffered second degree burns on the arm and shoulder.",1
"An employee was moving boxes on the conveyor when his right-hand middle finger came into contact with the belt, amputating his fingertip.",1
"An employee was trying to clear a piece of jammed wood from a machine. The machine was running at the time. The employee's hand was exposed to the point of operation, lacerating the middle finger, which had to be amputated at the middle joint.",1
"The employee was walking back from a patient's room by the nursing station, tripped and struck her left arm on the nursing desk fracturing it.",1
An employee was cleaning a paper machine former with a wash-down hose when his ring and middle fingers were amputated.,1
An employee was pushing a piece of wood through a saw blade when the blade partially amputated his right index finger.,0
"An employee was using a water hose to clean the floors when he slipped backwards and fell onto the leg of a labeler machine, suffering a contusion to the buttock.",1
An employee was opening a valve on a tanker trailer. Chloroacetic acid came out of the valve and burned the top side of the employee's right arm.,1
"On May 12, 2016, an employee was operating a drill press to perform a polishing operation when his hand became caught between drill press and the part he was polishing, amputating his middle and ring fingers. He was wearing cut-resistant gloves at the time of the incident.",0
An employee was working a shaft in a CNC machine when the shaft flew out of the machine and struck the employee in the face. He suffered a right cheek laceration and right eye injury.,0
"An employee was working off a ladder to rig a cope mold onto the hoist of an overhead crane when the crane knocked the mold over. The employee dismounted the ladder to avoid being crushed, and his right foot was caught underneath the cope mold.",1
An employee suffered chemical burns while unloading a chemical railcar.,1
An employee was attempting to join two pieces of metal when a piece of metal fell and crushed the employee's left middle finger. The employee's fingertip had to be amputated.,0
"During torque wrench preparations, an employee's right ring fingertip was amputated.",0
"An employee was moving heavy equipment on the rig floor when his left hand was caught between two pieces of the equipment, amputating his ring fingertip and the first knuckle of his middle finger.",0
An employee was driving home after working on underground plumbing when he started to feel cramping in his legs and fingers. He was hospitalized overnight for dehydration.,1
An employee was performing work on a workover rig when a lifting cap came loose from a valve and hit the employee's hardhat. The employee suffered cuts on the head from the hardhat.,1
"On 5/12/2016, at 0930, an employee was rigging up the top section of a bucket elevator that he was installing. The load shifted and rolled onto him, fracturing his pelvis and possibly some ribs.",1
"Four employees were working on the melt floor when Employee 4 noted a change in sound within a furnace.  The sound indicated that water was leaking into the furnace, and water was also visibly coming out of an observation port at the bottom of the furnace. Employee 1 went to investigate and determined that the roof (lid) of the furnace could be opened to view the extent of the leak.  Employee 1 gave Employee 4 the okay to open the roof of the furnace via the radio.  When the roof was opened, a large piece of slag dropped from the bottom of the roof down into the shell of the furnace. This slag dropped into the molten metal and water below, causing a rapid expansion event that spewed slag and molten metal out of the furnace into the surrounding area.  The slag and molten metal struck Employee 1 and Employee 2.  Employee 1 was struck on the left side of the face and neck, causing him to be thrown to the ground. He suffered burns and abrasions to the left side of his face and neck.  Employee 2 was struck on the back of the helmet, knocking him to the ground, bruising the back of his head, and causing a concussion. Employee 2 also received several contusions and a large hematoma to his elbow due to being thrown back from the blast.",1
An employee was lowering steel from a truck when the steel shifted and hit the employee's right ankle. The employee was hospitalized with serious bruising.,1
"An employee was cleaning rollers on an automaton machine when her fingers were caught between the rotating rollers, amputating her fingertip.",0
An employee was training when he suddenly felt ill. He was hospitalized and treated for dehydration.,1
"An employee was showing a coworker how to operate a forging press and was pointing toward the machine's operations. To get a better view, the coworker leaned forward and accidentally made contact with the foot pedal, actuating the press. The employee's right index finger was amputated by the machine.",1
"An employee fell from a boom lift basket while driving through a mall parking lot, contacting the ground and suffering a head injury.",1
An employee suffered an amputation while cleaning out a peanut inducer machine.,0
"An employee was drilling holes in square tubing using a drill. He had finished drilling 77 holes and went to move the drill. He put his left hand on the chuck just above the cutter (drill bit), while his right hand was near the back of the drill. When he tried to moved the drill, it was still magnetized. He was going to use his right hand to demagnetize the drill, but the start button was accidentally activated. The material of his glove between his left pointer finger and thumb became caught in the shaft of the drill, twisting his left thumb and causing a compound fracture.",1
"An employee was pre-fabricating duct work when he hit his right pinky finger with the hammer on the sharp edge of the duct, amputating the fingertip.",0
"While descending a step ladder, an employee missed a bottom step and fell to the floor, possibly fracturing the right hip.",1
"An employee was moving a counter when he fell into a window that had broken glass. He suffered severe lacerations, requiring hospitalization.",1
"An employee was holding the end of a cross tie to load it into a backhoe bucket when his right index finger was smashed between the cross tie and bucket, amputating his fingertip.",0
"An employee was pulling tenders off of chickens as they passed her work station.  As she stepped off her platform (9.5 inches), she slipped or tripped and fell to the ground in a seated position, injuring her back.",1
"A maintenance employee was working from a step ladder, trying to clear a clogged water pipe. As he was trying to unplug the pipe, it cracked and water shot out. The water hit the employee, causing him to fall from the ladder to the concrete ground. He landed on his feet and broke both heels.",1
"An employee was stopping traffic as a flagger. A truck failed to slow down or stop, crashing and skidding off a stopped car. The employee saw the collision coming, attempted to run to safety, and was struck by the truck, suffering a broken hip and shoulder.",1
An employee slipped on floor stripping chemical and fell to their knees. The chemical seeped into their pants resulting in third degree burns to the knee caps.,1
"An employee used a pocket knife to open a box. When he closed his pocket knife, he amputated his right-hand middle fingertip.",1
"On the morning of May 12, 2016, an employee was relocating product when he fell from an ""electronic platform"" that was approximately 6 feet high to the concrete floor below. Upon impact with the floor, he fractured his wrist and injured his head. He was hospitalized and required surgery.",1
"On or about 5/12/2016, an employee received a partial fingertip amputation injury while operating a paint brush hand trimmer machine, known as a hand sharp edge. While manually holding a paint brush in the machine, her finger slipped and contacted the rotating blade of the machine. The contact resulted in a partial fingertip amputation.",0
"An employee was walking into the break room when he slipped and fell on the damp floor, suffering a hairline fracture to his head.",1
"An employee was working on commodity parts inside a seeder tank on sloped side walls when he dislocated his hip, requiring hospitalization.",1
"An employee was loading his pickup truck. While waiting for an inspector, he decided to clean some trash out of the bed of his truck. A gust of wind then came along and blew the employee off the tailgate of the truck. He lost his balance and fell to the ground, fracturing his left leg and requiring hospitalization.",1
"An employee was pulling nails from roof panels. He started to carry a panel across the roof and stepped on an area that was insulation only. He fell approximately 15 feet to the lower level, breaking his left femur and one rib.",1
"While an employee and her partner were using a stair chair to move a patient down some stairs, the employee felt a pop in her back and was unable to move further. She was hospitalized with lower back pain.",1
"An employee had connected sodium hypochlorite to the hydrochloric acid tank thinking it was acid. When the two mixed, gases formed and the employee was overcome by gas inhalation.",1
An employee was adjusting a lawn mower when the belt/pulley amputated the employee's left pinky fingertip. The mower was running at the time of the incident.,0
"An employee was installing wooden forms on shoring when the brace slipped. His hand was caught between the forms, crushing his left middle finger.",1
"An employee was using a chain saw to cut a tree. The saw became lodged within the tree and bucked, causing the employee to lose control of the equipment. The employee suffered a 7-inch laceration on the thigh, requiring hospitalization.",1
"An employee was flagging traffic in a work zone behind a line of cones when a driver drove straight into the employee, bruising the employee's right leg and causing a concussion.",1
An employee was using a portable hand grinder and cut their bicep.,1
"An employee was loading baggage when a spider bit his left leg, causing swelling.",1
"An employee fell approximately 5 feet through an open ground-floor elevator shaft, suffering a fractured eye socket and requiring hospitalization.",1
"An employee was using a chain saw to cut sections of a felled tree. When the saw cut completely through a section, the tree, which was under tension, swung 7 feet and hit him in the hip area, knocking him to the ground. He broke his femur, sacrum, pelvis, and ribs and suffered internal injuries, requiring hospitalization.",1
"An employee was performing routine maintenance on a wind tower when the wind picked up and caused the motor to start turning. The employee's glove was caught in the motor, and his middle finger was pulled in and lacerated. The finger had to be surgically amputated.",0
An employee was disconnecting a vapor line and a cargo hose that contained trichlor ethylene when his knees buckled and he stumbled. He was hospitalized with heat exhaustion.,1
"An employee opened the dishwasher door to load dishes into the washer when the switch malfunctioned, causing hot water to splash out and burn his face, arm, and chest. He was hospitalized.",1
An employee was grinding a hole in an empty 300 gallon gasoline tank. Sparks from the grinder ignited gasoline vapors resulting in a fire/explosion. The employee received flash burns to the face and first degree burns to the forearms and fingers.,1
"An employee was running the vinyl machine, which rewinds and cuts big rolls of vinyl into smaller rolls, when his right hand was caught between two rolls. The skin was peeled off his right hand, requiring hospitalization.",1
A maintenance employee was troubleshooting a machine when his right middle and ring fingertips were amputated by the machine's unguarded chains and sprockets.,1
"An employee had cleaned a room and was exiting when the room door slammed on her right middle finger, amputating the fingertip.",1
An employee was checking the electric output on a fan when the alternator fan blade caused an amputation injury to his right hand.,0
"An employee was flagging traffic at a road construction when an excavator backed over and crushed his lower left leg. He suffered severe lower leg fractures, requiring hospitalization and surgery.",1
"An employee's finger was caught in a truck's lift gate, amputating the fingertip.",1
"An employee was cutting a tree with a chainsaw when the tree split and struck his left arm. The impact severely lacerated his left arm, which had to be amputated above the elbow. The employee was wearing required PPE at the time of the incident.",1
"The injured employee was training another employee on how to operate the side puller machine. The injured employee noticed that a hide was not clamped properly and went to adjust it on the clamp. At the same time, other employees pressed the buttons to start the machine. The clamp caught the injured employee's right middle finger, which had to be surgically amputated from the tip to the first knuckle.",0
An employee was delivering pressure cylinders when a cylinder slipped and fractured his right lower arm.,1
"An employee was cutting plywood using a circular saw when the saw got away from him, cutting his left index finger. The finger was amputated at the hospital.",1
"An employee was strapping down a load of lumber onto a flatbed truck. While attempting to get down from the back of the flatbed, he fell 3.5 to 4 feet and hit the ground. He was hospitalized with a collapsed lung.",1
"On May 13, 2016, an employee suffered a partial amputation of the right index finger, to the first knuckle, while greasing a belt and pulley on the dust collector.",0
An employee's left pinky finger contacted an unguarded fan in equipment resulting in a partial amputation.,0
"An employee was delivering mail into a door slot when a dog bit his right hand, amputating the right index finger at the first knuckle.",0
"An employee was moving a glass rack with a pallet jack. While lowering the rack of glass, the employee had the handle of the pallet jack in a vertical position. When the rack was lowered, the employee's thumb was caught and partially amputated between the rack and the handle of the pallet jack.",1
"An employee was using a diluted corrosive chemical solution with a 24"" long brush to clean drains. The employee sustained a second degree chemical burn to the forearm and wrist when the chemical solution splashed under the employee's protective gloves and sleeves.",1
"An employee was pulling containers of mail from a tractor-trailer onto an elevated scissor lift. The employee fell through the opening, and a container also fell through the opening on top of him. He suffered a laceration to the back of his head and a neck fracture, requiring hospitalization.",1
"While attempting to repair a lawnmower, and employee turned off the mower and tried to flip it over before the blades stopped spinning. His right middle fingertip was amputated by the blades.",1
"An employee operating a boom lift struck a door and broke a leg, requiring hospitalization.",1
"As an employee stepped onto a scaffold to install an electrical box, the scaffold moved, causing the employee to fall 20 feet to the lower level. The employee was hospitalized.",1
"On May 14, 2016, at approximately 2:45 p.m., an employee fell while getting up from a clerical chair. Her foot became trapped under the chair, causing her to fall to the floor on her right side. She fractured her hip and was hospitalized for surgery.",1
"An employee was putting parts away while standing on a ladder when the ladder slipped. The employee dismounted the ladder and landed on their feet, breaking both heels.",1
"While stepping onto an assembly, an employee tripped on the edge and fell forward. The employee's jaw struck an angle iron and broke in three places.",1
An employee was walking down the aisle when she slipped on the wet floor and twisted her ankle. Her ankle began to swell immediately and was broken in two places. She also fell and hit her head on the floor.,1
"On 5/14/2016, at 11:30 a.m., an employee was stripping concrete forms. A wooden block was removed from between the two forms, which then came together and crushed the employee's right thumb. He was hospitalized and required surgery.",1
"An employee lost footing and fell down stairs to the ground level, breaking ribs and puncturing a lung. The employee required hospitalization.",1
The employee was dicing red peppers when he cut his left thumb resulting in the amputation without bone loss of the tip of his left thumb.,0
"Two maintenance employees were working to replace carriage arms on a stacker machine. After they dislodged the pins that held the two carriage arms in place, the arms did not swing free. An employee standing on a support beam struck the right-side carriage arm with a hammer to free it. The arms struck an employee, fracturing the employee's left-foot metatarsal bone.",1
"An employee was cleaning out a drop-out chamber with a Grant machine. Material fell onto the wet ground creating steam that caused second degree burns to the employee's face, ears, neck and knees.",1
An ironworker was handling an S-4 beam when he lost balance and fell to the floor. The employee was caught between the beam and the floor and a section of the employee's pinky was amputated.,1
"An employee was stomping/crushing boxes on top of a dumpster when he slipped and fell off the dumpster, breaking his right tibia.",1
"An employee was retrieving supplies from the storeroom when she tripped and fell over a plastic rack, breaking her left femur.",1
An employee in a crane suffered electrical burns when the boom came into contact with a powerline.,1
An employee was connecting the hitch of a wood chipper to a customer's truck when the hitch ball fell on top of his left foot. He had surgery and was hospitalized.,1
"On or about May 16, 2016, an employee was riding a mountain bike on a bike trail when he hit a jump and fell onto his bike. He was hospitalized and required surgery for possible internal injuries.",1
"On 05/15/2016, at 5:00 p.m., an employee was administering medication to a patient when he slipped and fell, fracturing his kneecap and requiring hospitalization.",1
An employee was feeding boards into a door jamb machine when his left hand was caught and crushed in the machine's chain and sprocket. He was hospitalized.,1
"While washing a skid steer with a pressure washer, an employee's left wrist was cut by the water pressure. The employee began to feel sick later that day and was hospitalized.",1
"An employee was strapping down cargo on a ship and helping to guide a forklift driver when the forklift bumped the employee and knocked him down. The load then fell onto the employee's ankle, breaking it.",1
"An employee was removing a fence from a ditch near an excavator when the excavator backed over the employee's leg, breaking it.",1
"An employee was working on an adjacent thermoforming line when he saw a pile of regrind collecting on the top of the regrind system hopper. He climbed up to the platform to access the area where the regrind was collecting. As he brushed away the pile of regrind to try to determine how it was leaking out of the system, his right middle finger entered an access hole in the side of the airlock. The blade inside the airlock amputated his fingertip.",1
"An employee was attempting to clear a jam on a molding machine when he was caught between the machine and the railing. He suffered a back laceration with possible lung damage, requiring surgery.",1
"While an employee was working on a punch press a piece of metal became stuck. The employee removed the guard to remove the metal piece. While his fingers were in the die area, the employee hit the foot pedal and stroked the machine. The employee sustained the amputation of the left index finger and fractures to the left middle finger.",0
"An employee was replacing a concrete grinder wheel when the grinding wheel exploded, lacerating his left index finger and fracturing his left shin bone. He was hospitalized.",1
"On May 16, 2016, at 11:05 a.m., an employee was replacing a light fixture while standing on a ladder that was approximately 4 feet off the ground. He came in contact with a live electrical wire and was shocked. He then fell from the ladder to the ground below.",1
"During the cleaning process, an employee's hand came in contact with a moving piston located near the bottom of the bakery depositor machine, amputating her left middle fingertip.",0
"An employee making a delivery fell off the lift gate on the back of his truck, struck the ground below, and broke his lower right arm.",1
"An employee entered through a cooler door and slipped on ice that had accumulated on the freezer floor, breaking the right femur.",1
"An employee was handling a freight container on a chassis. When he hit a pin with a hammer, the container dropped and crushed his hand, pulling off his glove and skin. He was hospitalized for surgery.",1
"An employee was attempting to tighten bolts on a sprinkler system used for fire suppression when a gasket ruptured, causing water under pressure to flow out and strike him. He then fell 16.5 feet from his ladder to the concrete floor below. He suffered facial scrapes, an orbital bone fracture above the left eye, a left shoulder fracture, a left rib fracture, a sacrum bone fracture on the left side, a collapsed lung on the left side, and a loss of consciousness.",1
"While placing beef into a meat tenderizer, an employee's right hand was caught in the machine, amputating the pinky finger and ring fingertip.",1
"An employee fell through a rotted section of a commercial flat roof while stripping material from the center of the structure. The employee fell approximately 16 feet to the floor, breaking bones in the right arm and elbow, cracking the tailbone, and fracturing the pelvis.",1
An employee attempted to drive in a sheet-metal screw with a Phillips-head bit attachment on a power hand drill. The drill slipped and punctured the middle finger on his right hand. His hand then became infected and required hospitalization.,1
"While walking, an employee stepped up and over a curb instead of using a ramp.  The employee's knees gave way, resulting in injuries to both knees and quadriceps. The employee required surgery.",1
"An employee was caulking the exterior of a boat while standing on a ladder or scaffold. The employee fell 6 feet from the scaffold or ladder, breaking a vertebra.",1
"An employee was on an 8-foot tripod ladder, painting a wall with a hand brush. The employee slipped and fell, fracturing the left-side scapula and one rib.",1
"On Monday, May 16, 2016, at 2:35 p.m., an employee was helping two coworkers and a forklift driver stack wood beams.  The driver was holding the forks (which carried 20-foot planks) level. The planks were banded together, and the employee and his coworkers were removing the bands. As they were helping to move the last banded bundle, the load shifted and the final band broke. The planks fell on top of the employee's right leg/foot area, breaking his ankle in two places.",1
"An employee was preparing to install a TV monitor. He was working from an 8-foot ladder and using a voltage tester to evaluate wiring to power the monitor when he made contact with a live electrical wire and fell off the ladder. He hit his head, cracked his vertebra and rib, and suffered a laceration that required stitches.",1
"An employee was removing a C-hook from the inside diameter of a steel coil. The employee's left index finger was caught between the C-hook and the steel coil, partially amputating the fingertip.",1
"On May 17, 2016, an employee was burned by hydrofluoric acid.",1
"An employee was dismantling an overhead conveyor when the connection point for the rigging gave way and the conveyor fell, amputating the employee's left pinky finger at the first joint (just below the nailbed).",0
"An employee dropped a bottle and attempted to catch the bottle. The bottle struck another bottle, breaking and cutting both of the employee's pinky fingers.",1
An employee was taking a pipe off of a rack when the pipe fell and pushed his right thumb up against a saw blade that was not in operation. His right thumb was partially amputated.,0
"While dismounting a roller, an employee's left foot became caught in the bottom step. The employee could not hold on and fell backwards onto stone and dirt, fracturing the left ankle and elbow.",1
"An employee tripped and fell off the back of a flatbed truck trailer, fracturing the L1 vertebra.",1
"An employee was adjusting the forks on a forklift when a fork popped off the frame and pinched the employee's left middle and ring fingers. The employee's middle finger was partially amputated, and the ring finger required sutures.",0
"An employee was observing maintenance being performed on the head of a planer when his left hand contacted the planer head, amputating his left ring finger at the first joint.",0
"An employee slipped and fell on the workplace parking lot, suffering a right knee injury that required surgery.",1
"An employee was moving a 750-pound slab of concrete when the slab tilted off the base. The employee tried to catch it and suffered a broken and lacerated left-hand finger, as well as bruising to the left thigh, knee, and foot.",1
"An employee's left hand was caught in a table router/notcher while the employee was pushing lumber into the machine, requiring surgery.",1
"An employee was moving remnant pieces of stone countertops. As he pulled them toward him, the pieces tipped and fell on his right leg, breaking it.",1
"An employee was standing on a step stool to refresh a kitchen display. After stepping off the step stool, he began walking, felt a pop in his right leg, and experienced leg pain. He was hospitalized.",1
"An employee was cutting flash off of one of the pallets with a knife when he missed the pallet and cut his left arm, damaging his arteries.",1
"An employee was staging material on a roof that was wet from rain when he slipped and fell to the ground, fracturing his pelvis.",1
An employee was shocked while MIG welding and was hospitalized.,1
"On May 17, 2016, an employee operating a forklift drove off the dock between the dock and a truck trailer, suffering a broken ankle. At the time of the incident, chocks were not placed behind the trailer wheels and the truck was in neutral.",1
"An employee was helping to load 40-foot steel angles onto a truck. The crane moved, and the chain dropped due to the load. The load then struck the employee in the back of the head. The employee was hospitalized with a head injury and three fractured vertebrae.",1
An employee was moving a round table that was leaning against the wall when the table tipped over and hit the employee in the leg.  The employee was hospitalized.,1
"As an employee closed the bathroom door, his left hand was on the door's hinge. His middle fingertip was caught and amputated (no bone loss) between the hinge and the jam.",0
"Employees are exposed to a caught by hazard from an unguarded ammunition loading machine, resulting in an amputation.",0
"An employee was cleaning adhesive buildup from the surface of a driven rubber nip roll on an adhesive applicator unit. The employee's hand and forearm were pulled forward and upward by the machine, subsequently pressing and holding the back of the employee's left hand against the heated surface of the adhesive die tip. The employee suffered a burn across the back of the hand between the wrist and the knuckles.",1
"An employee was using an overhead hoist with a small J-hook to lift a raw part up from a work table in order to change the orientation from face-down to face-up. He had lifted the part approximately 3 inches from the table surface when the part became unsecured from the hook and dropped on his left hand. The fifth digit was smashed and required stitches, and the fourth digit was partially amputated at the first distal.",0
"An employee fell from a wet ladder while installing awning, requiring stitches.",1
"An employee was cleaning out the dishwasher when he suddenly fell to the ground and hit his head, becoming unconscious due to dehydration.",1
"An employee was cutting a shim on the quarter-inch flat stock of the table saw when the saw became jammed. While he was attempting to unjam the saw, his right index finger was amputated at the first knuckle, his middle finger was amputated at the second knuckle, and his ring finger was lacerated.",0
"Employees were going to lift a 40' x 30"" x 16.5"" launch with a crane. Prior to hooking, the stack tipped over and caught an employee's lower leg, injuring the employee's left ankle and foot.",1
"An employee slipped and fell off a free-standing ladder approximately 2 to 3 feet high, landing on his hands, and suffering a compound fracture of his right arm.",1
"While setting metal forms, an employee's right index and middle fingers were caught and amputated between the forms.",0
"An employee tripped and fell while walking down a flight of stairs, injuring the right knee.",1
"An employee was trying to unattach the hook from a lifting ""eye"" on the top of a compressor after it was moved when his pinky fingertip was caught and amputated between the hook and the ""eye.""",1
"An employee slipped on a powder and fell on the tile floor while walking in a corridor and fractured their hip, shoulder and pelvis.",1
"An employee was cutting a piece of wood. While he was guiding it with his left hand and using a push stick in his right hand, the piece of wood kicked back causing his left hand to come in contact with the saw blade resulting in a severe laceration to the left thumb. Part of the employee's left thumb was later amputated.",1
"An employee was flagging and tripped, flipped, and fell hitting the curve. The employee suffered intracranial bleeding.",1
"An employee fell while walking down the hallway, fracturing the left elbow.",1
A floor stripping cleaning chemical was spilled onto an employee and the employee received a chemical burn on the left hand and leg and the right foot.,1
"While cleaning up in the saw area, an employee attempted to remove scrap from a scrap conveyor. His hand was caught by the belt and pulley, and his radius and ulna were fractured.",1
An employee fell from a loading dock and fractured a foot and dislocated a shoulder.,1
A worker fell six feet off the back of a bucket truck while securing the boom to its cradle. The employee fractured a rib and an elbow and sustained a cut over the right eye.,1
"An employee was using a saw to cut an 8-inch PVC fire-waster line pipe when the pipe moved, causing the saw to kick back and lacerate the left side of the employee's chest.",1
An employee suffered the amputation of two fingers and two fingertips on the right hand after attempting to clear a clogged grinder that is used to grind waste Dacron.,1
An employee was using a saw to install water lines when the saw kicked back and lacerated his chest.,1
An employee amputated three fingers with a table saw.,1
An employee was operating a forklift and struck a pole. The employee was hospitalized because of the injuries sustained.,1
An employee reached to adjust a part on the press die and suffered a partial amputation of a fingertip on the right hand.,0
An employee stepped on a nail while pulling aluminum and was later hospitalized when the foot became infected.,1
"At 7:30 a.m., an employee was possibly stocking inventory on the second floor when he fell 12 feet to the ground below, severely fracturing his ankle.",1
"While climbing a fixed ladder, an employee fell backward and fractured his wrist.",1
"An employee was preparing to change piping on a propane tank when liquid propane leaked out and burned the employee, requiring hospitalization.",1
An employee was operating a forklift in the produce warehouse. The employee started feeling dizzy and having blurred vision. The employee then sat down to rest and noticed loss of feeling in the hands and face. The employee was hospitalized with high levels of carbon monoxide in their system.,1
An employee was injecting a vaccine into chickens on a poultry farm along a conveying system and stuck the back of his left index finger with the injection apparatus.,1
The employee was operating a Hydro T machine that produces copper plumbing fittings. The employee was clearing a jam and amputated the left middle finger and lacerated the left ring finger.,0
"An employee was adjusting the forks of a fork truck while they were lifted approximately 2 feet in the air when the forks failed and fell, partially amputating his left big toe. He had surgery.",0
"Two employees were closing the garden gates. When the gate closed, one of the employee's left index finger was pinched and lacerated. The employee then had surgery for a partial amputation of the top joint of the left index finger.",1
An employee was training on an ATV and was thrown from the ATV. The ATV fell onto the employee who suffered broken ribs and a possible shoulder injury.,1
An employee was trimming a tree limb with a chainsaw while working off of an extension ladder. The ladder fell and the employee fell approximately 10-12 feet with the ladder landing on the ground in a standing position. He broke his right leg in three places and suffered an open fracture to his lower right leg requiring hospitalization and surgery.,1
An employee was cutting a load of bundled timber pieces. One of the timber pieces fell from the load and struck the employee's right index finger and foot resulting in amputation of the fingertip and a fractured foot.,0
An employee's finger was caught in the premelter conveyor while clearing pizzas off the conveyor. The fingertip was amputated.,0
"An employee was climbing the storage racks to retrieve product and fell, landing on his feet and breaking both heels.",1
"An employee was greasing the dock door when the door dropped, causing the chain to catch the employee's glove. The employee's right-hand index and middle fingers were amputated just below the nail line.",1
An employee was helping to drag brush from a work site when a tree branch fell and struck him on the hardhat. He suffered a head contusion and was hospitalized.,1
"At 1705, on 05/18/2016, an employee and a coworker were cutting over on a roll of material when the cut edge flap fell over. When the employee grabbed the material, the nip roll caught his hand and arm. He suffered a double fracture to the left ulna and radius, requiring hospitalization.",1
An employee fell down basement stairs and was hospitalized for a broken shoulder and/or scapula.,1
"An employee was disconnecting a trailer and a jack when the trailer moved, pinching and amputating his left-hand index and middle fingers between the trailer and jack.",0
"An employee was unbolting pipe and installing a plug on valves. A crane was lifting a B-Tex condensing unit. The unit tipped over, striking the employee in the back. The employee suffered a broken right shoulder blade, three broken ribs, and a collapsed lung, requiring hospitalization.",1
An employee was sanding on a disc sander when his right ring finger was caught in the sander and sanded down to the bone.,0
An employee injured an arm while cleaning a machine.,1
"While driving a stand-up forklift in the warehouse, an employee was crushed between the forklift and a pole, fracturing the left leg.",1
An employee was caught between the drilling rig and the mud pit and was injured.,1
"An employee walking towards an aerial lift, fell, and struck his head. The employee was hospitalized for a brain injury and lacerations.",1
An employee had four fingers on the left hand amputated when his left hand was caught in the rollers of the paper converting machine.,1
"On May 19, 2016, an articulating off road truck turned over and an employee sustained a broken ankle.",1
"While turning a powered industrial vehicle (PIV) around, an employee lost control of the PIV, which then flipped on its side. He dismounted the vehicle and hit his head, suffering a laceration above the left eye and a nose fracture.",1
An employee was attempting to retrieve a cat from a cage to give it a shot when the cat turned and bit her.,1
"On 5/19/16, at 7:56 PM, an employee amputated his fingernail and thumb tip (no bone loss) with a meat slicer. The employee was wearing one set of cut-resistant gloves at the time of the incident.",0
An employee was removing plastic from the sprocket of a machine when his right thumb was pulled in and amputated above the knuckle. The machine was running at the time of the incident.,0
"An employee was operating a table saw with a dado blade. While he was leaning down in a crouching position, he pulled back and his finger contacted the blade, amputating his fourth fingertip with bone loss and a fracture.",0
"On May 19, 2016, at approximately 3:30 pm, an employee was working as a flagger assigned to handling traffic control in a street renovation/construction work zone and was struck by a vehicle. The employee suffered a fractured ankle and was hospitalized.",1
An employee fell 8-10 feet from an extension ladder breaking ribs on the left side and sustaining a small puncture to the lung.,1
An employee was installing a frame angle using a powder-actuated tool when a pin ricocheted off a steel beam and punctured his chest. He was hospitalized.,1
An employee was injured while cleaning a blending machine.,1
"An employee was helping a coworker unload a portable generator from a box trailer. The generator was equipped with a fold-away handle. The generator had to be lowered approximately 18 inches to the ground outside of the trailer. The employee's right hand was placed between the generator frame and the handle. When his coworker pulled the generator out of the trailer, the generator fell 18 inches to the ground. The handle struck the floor of the trailer, pinching the employee's finger between the frame and the handle with approximately 200 pounds of force. The employee's middle finger was fractured, and the distal tip was amputated. His ring finger was also partially amputated.",0
"An employee was descending a ladder and lost his footing falling 12-15 feet.  The employee sustained a broken left wrist, dislocated the right shoulder and fractured the right side of his face and jaw.",1
An employee was packaging and weighing bundles of stainless steel shapes. The employee was adjusting the lifting strap to balance a load. The employee's finger was caught under the load (steel beam) when it was lowered onto the saw horses resulting in a partial amputation of the left index finger.,0
"An employee was installing solar screens on windows and fell from a ladder, striking his head, breaking an arm, and cracking ribs as a result of the fall.",1
An employee was performing an inspection on a bearing housing that was attached to a forklift by a strap.  The housing came loose and fell onto the employee shattering his left knee and breaking his ankle.,1
An employee fell 15 feet out of a tree while clearing branches. He was hospitalized with a fractured spine.,1
An employee was moving a vehicle into a bay when the employee's hand was caught between the tire and the wheel well crushing one finger and breaking another finger.,1
An employee was replacing the motor and bearing on a cooler unit/fan when his left thumb was caught between a belt and pulley on the unit. He suffered a left thumb distal tip amputation.,0
"While sorting food product, an employee stepped off a stand, lost balance, and fell to the floor, breaking a wrist.",1
"An employee was climbing a telecommunications tower without incident.  A co-worker looked over and the employee appeared to be in pain while holding on to the tower at a height of approximately 250 feet.  No fall or other event occurred.  The employee just climbed the tower and started feeling pain in his lower back.  Tower rescue was initiated and the employee was lowered to the ground.  The employee was using a personal fall arrest system and was fully tied-off when he experienced the pain.  Upon reaching the ground, an emergency response crew began administering pain medication.  The employee experienced an adverse reaction to the medication and was rushed to the hospital where he was admitted primarily due to his reaction to the medication administered by the first responders, but the employee may have some lower back disorder(s) as well.",1
An employee suffered severe cuts to the left arm while cleaning a saw. The saw was not locked out at the time of the incident.,1
"While bending to lift a product out of a box, an employee suffered a back injury.",1
"An employee was attempting to enter the garage. As he went over a chain that was across the bay door, his foot became tangled in the chain. He fractured both elbows.",1
An employee's right index finger was amputated while operating a press machine.,1
"While performing a final inspection of a bus, an employee fell on the bus steps, fracturing ribs.",1
An employee was eating lunch and fell from a stool resulting in a broken femur.,1
"An employee was helping an operator clean glue off a machine roller. As he was wiping down the roller with a damp cloth, his hand was pulled into a pinch point, amputating his right middle fingertip.  The machine was unguarded and running at the time of the incident.",0
"An employee was de-winterizing a boat to prepare it for launching when his foot was lacerated by the engine propeller, requiring hospitalization.",1
"An employee was standing up a bundle of compressed cardboard to twist the metal wiring closed when his nose was struck and lacerated by the metal tie. He then lost his balance, fell backward, and struck his head on the concrete floor. He required hospitalization.",1
"An employee attempted to catch a bundle of shingles that was about to fall off the truck's conveyor. When he did this, he lost his balance placing his hand in a pinch point and amputating a portion of his right thumb.",0
An employee was walking into the packing cooler when a pallet jack ran over the employee's toe.,1
"An employee was using a sledge hammer to install a master pin into the track of a track hoe. When the employee struck the pin with the sledge hammer, a small piece of metal splintered off the pin and struck the employee in the right leg below the knee, puncturing the leg and lacerating an artery.",1
"While attempting to investigate the cause of a hot wood pulp stock overflow, an employee stepped into pulp stock that was higher than his rubber boots. The stock was approximately 135 degrees and caused second degree burns to the employee's right leg and foot, requiring hospitalization.",1
"An employee was using a tractor to mow grass when a high-tensile wire became caught in the machinery. When the employee stepped off the tractor, the wire swung around and hit the employee's left foot, breaking two bones and lacerating the heel.",1
"An employee was inspecting a conveyer before starting production. The conveyer was in the off position at the time. The employee slipped while kneeling down to inspect the clean-out and then grabbed the side of the conveyor, which caused the clean-out cover to shut on the employee's finger, amputating the fingertip.",0
"On or about Friday, May 20, 2016, an employee was climbing into his cab when he fell back out onto the pavement, breaking his hip and requiring hospitalization and surgery.",1
"On or about May 20, 2016, at 8:10 a.m., an employee was operating a walkie rider pallet jack in walkie mode when the pallet jack backed over him. His left leg was pinned between the jack and a large metal tank, requiring hospitalization and surgery.",1
"An employee was cleaning racks inside a warehouse at ground level when a pallet on the third level of a nearby rack failed, allowing a large load of wrapped cookies to fall on him and fracture his left femur.",1
"On Friday, May 20, 2016, an employee was testing personal protective equipment when he strained/sprained his back. He was hospitalized.",1
"While running tubing into a well, an employee was struck on the head and face by the tubing, requiring hospitalization.",1
"On May 20, 2016, at about 4:00 p.m., an employee was popping out reflective items in a construction zone when a driver entered the zone and ran over the employee's foot. The employee was hospitalized with broken bones.",1
An employee's right index and middle fingers were amputated while working with a sprue grinder vacuum system.,0
"An employee was helping to hook up propane and preparing kitchen equipment by lighting the pilot lights when a propane flash occurred, causing second degree burns to the employee's left hand.",1
"An employee was cutting cores with a saw. While she was attempting to retrieve a marking crayon, the saw cut her right hand and broke her right index finger. She was hospitalized.",1
An employee was moving an energized pump when the equipment suddenly actuated and caught the employee's finger in a vent port. The employee's finger broke and sustained lacerations that required surgery.,1
"An employee was getting ready to perform maintenance on a furnace transformer when he contacted a 12.5-kilovolt line, suffering second and third degree burns.",1
"An employee was driving a boat in the open ocean when he was hit by a plasma fireball, suffering an electrical shock.",1
An employee was working on a ship and dropped a lashing jack (lasher/header) on his foot and suffered an amputation to his first toe (big toe).,0
An employee was using a platform ladder to put parts in storage. She lost her balance and fell to the ground injuring her ribs and left leg.,1
"While operating a paper cushioning machine, an employee's right hand contacted the cutting blade, amputating three fingertips.",1
"An employee was breaking up wooden furniture on a raised loading dock and then throwing pieces into a 30-yard dumpster positioned along the dock. While attempting to throw a wooden drawer into the dumpster, the employee's right foot entered the gap between the loading dock and dumpster. He then tripped over the dumpster lip, fell forward into the dumpster, and struck his chest on the debris inside. He broke two ribs and suffered internal bleeding, requiring hospitalization.",1
An employee fell and sustained a laceration while loading freight.,1
"On May 21, 2016, at approximately 5:30 a.m., an employee was scanning bins on the shelves from a ladder. As she was descending the 6-foot ladder, she fell from the third step to the floor, breaking her left leg just below the knee.",1
"While operating a standup forklift, an employee struck a concrete wall, crushing her left foot.",1
"An employee raised the hoist arm on a conveyor to pull a pallet that had stopped. The hoist arm then fell down and struck the employee, causing contusions and abrasions.",1
"On 5/21/2016, an employee tripped and impacted the ground while exiting the back door of the building, breaking an arm in three places.",1
"After clearing debris from the chain of a machine, an employee noticed the bolts that held in the sealing die were loose. As he was attempting to tighten the bolts, the die came up and crushed two of his fingertips.",1
An employee was hospitalized after sustaining burn injuries during a house fire.,1
"An employee was riding a horse when the horse stopped abruptly. The employee was thrown over the front of the horse, sustaining a broken back.",1
A piece of metal from a crusher machine splintered off during routine maintenance and hit an employee's right eye.,1
"While working at the cash register, an employee tripped on a guest, fell to the floor, and suffered a laceration above his left eyebrow.",1
An employee suffered a reaction from a brown recluse spider bite.,1
"An employee was performing preventative maintenance on a sterilization machine. As the employee was removing the housing/base of the machine's filter assembly, white mist came out of the inside of the filter. The employee inhaled hydrogen peroxide vapors, requiring hospitalization.",1
An employee was airing up a steer tire for a tractor trailer truck. He put it in a cage and was walking back to check for leaks when a zipper rupture occurred. The force pushed him back and he fell onto the ground. He was hospitalized.,1
"On or about May 22, 2016, an employee's right pinky fingertip was amputated when a supply closet door shut on it.",0
An employee's right hand was suctioned while unloading a tanker resulting in a partial amputation of the right index finger.,1
An employee attached a strap from the excavator bucket to the jack hammer and then signaled for the operator to move the bucket back. The employee saw the strap start to get tighter when the jack hammer popped up and crushed his right hand between the hammer and the pipe. His right pinky finger was amputated.,1
"While attempting to clear plastic from the die of a plastic molding machine, an employee's hand was caught in the die. The employee suffered a severe laceration to the hand and thumb.",1
An employee was operating a power shear when his right-hand middle fingertip was caught in the shear's part holder. His fingertip was partially amputated and required stitches.,0
An employee was feeding wood-fiber insulation boards into a rip saw when the saw blade amputated the employee's right index fingertip.,0
"While operating a forklift, an employee struck a rack, causing her left foot to fall off of the forklift platform. The forklift continued to travel forward, running over and fracturing her left leg.",1
"On or about 5/23/16, an employee sustained serious injuries while cleaning inside a tank. He was hospitalized with a laceration on/near his abdomen, a left-side puncture, and bruising.",1
"An employee was mowing a side hill when the mower tipped and rolled over, striking and fracturing the employee's right ankle.",1
"An employee was taking two drums of trash to the dumpster with a forklift (55 gallon and 20 gallon).  The employee lifted the drums and tried to tilt the drums so they would fall into the dumpster. His left middle finger was caught between the dumpster and the 20-gallon drum, amputating the first digit.",0
"The passenger door of an automobile shut on an employee's left hand, amputating his ring finger at the nailbed.",0
"An employee was packing and moving plasma cases when a stack of cases began to fall. To avoid being struck, the employee turned suddenly and pulled a back muscle.",1
"An employee was pouring hot tar from a tote bucket to a mop cart when the person mopping went to dip the mop. The hot tar then splashed up and inside of the employee's glove, burning his right forefinger, thumb, and hand.",1
"An employee was helping to inspect an electrical line and repairing a jumper that came off the transformer switch. The employee pulled two of the three switches to de-energize the pole line and then repositioned his bucket truck to get to the next switch. When he grabbed the wire to reinstall it onto the third switch, the switch was energized and caused third degree burns to his index, middle, and ring fingers on both hands.",1
"An employee was setting up a vessel to be cleaned. When the employee opened up a sample port on the vessel, he was sprayed with yeast extract, suffering first and second degree burns to his torso and upper legs.",1
"After exiting the parking shuttle and walking into the building, an employee's foot stuck to the floor, causing the employee to fall face-forward onto the floor. The employee suffered a fractured right humerus, requiring hospitalization and surgery.",1
An employee was operating the Greer #3 machine and caught his right hand between the rake arm and the machine frame. The employee's right hand was crushed resulting in the amputation of the index finger.,1
"An employee was attempting to repair a gantry crane when stored energy caused the crane's hydraulic motor wheel to release and strike the employee, breaking the left arm and middle finger.",1
"An employee was washing down the drum of a mixer truck and was attempting to remove concrete that was stuck on a sprayer. His left arm was caught and crushed in a pinch point, requiring hospitalization.",1
"On May 23, 2016, an employee was operating a pallet jack when the employee's right foot was caught between a wall and the pallet jack platform. The employee suffered a right foot fracture.",1
An employee was holding on to the basket of the aerial lift. The employee's left middle finger was crushed between the lift rail and a piece of steel resulting in the amputation of the fingertip below the first knuckle.,0
"An employee was wrapping a finished pallet on a stretch wrap machine. While attempting to cut the excess stretch film from the pallet, the employee's left index fingertip was amputated between the pallet and the guarding around the turntable. The machine was still running at the time of the incident.",0
"An employee was cleaning the rollers on the printer machine while a coworker was moving the rollers forward inch by inch by tapping the jotting button. The employee's right pointer and middle fingers were pinched between the rollers, amputating the fingertips without bone loss.",0
"On or about May 23, 2016, an employee was handling a piece of steel with a magnet lifting-device.  The steel shifted and fell on the employee's left hand, amputating the first joint of the ring finger.",0
"On or about May 23, 2016, an employee was moving a mail rack when her hand was smashed between the rack and a concrete column. Her right pinky fingertip had to be surgically amputated.",0
"An employee was carrying a set of chains while walking on the outside of the Jersey wall. He slipped under the top rail and fell about 12 feet to the ground below, breaking his right ankle and requiring hospitalization.",1
An employee strained their lower back while pulling a power cable up a cell tower.,1
"A safe door closed on an employee's right thumb, severing the tip.",0
An employee was hospitalized for possible carbon monoxide poisoning while batching garbanzo beans.,1
"An employee was stacking cases on a pallet when he was struck by a pallet jack being operated by a coworker. The employee's ankle was pinned between the pallet and the pallet jack, fracturing his right ankle and requiring hospitalization.",1
An employee fell in the parking lot while walking to work and fractured the right tibia and fibula.,1
"While waiting for reject materials to be generated, an employee's right-hand middle, ring, and pinky fingers became wedged in a pinch point of the conveyor. The fingers broke and suffered skin removal.",1
"An employee was conducting a compression test on a part when the rig holding the part failed, allowing it to strike the employee's chest.",1
"After climbing over a 3-foot joist, an employee stepped on a loose angle iron and fell on his right side, suffering internal injuries.",1
An employee was delivering mail to residence and was bitten by a dog resulting in the amputation of the right index fingertip.,1
"An employee climbed a ladder to remove a ceiling tile and gain access to a locked office. The employee went over the wall, stepped on a ceiling tile, and fell through the ceiling to the floor, breaking both heels and requiring surgery.",1
"An employee was clearing a jam from a piece of equipment while working from a ladder. As he descended the ladder, his pant leg was caught on the machine and he fell to the floor, breaking his leg.",1
"An employee fell to the ground while walking on a loading dock, suffering a contusion.",1
"A steel gate came off its tracks and fell on an employee. The employee suffered a broken left hip, a cut to the back of the head, and a broken jaw.",1
"While stabilizing and leveling a rig, an employee's hand was caught between the stabilizing jack and the jack stand, amputating his right ring fingertip.",0
"An employee was helping a forklift operator unload blanks onto a metal pallet when his hand entered a pinch point, amputating his middle fingertip.",1
"An employee was bending rebar and turned the switch to the program position so he could check the angle of the bar. The bending pin went to the left side of the bar. As he turned the equipment back on in the manual mode, the bending pin returned to the home position. The employee had already loaded a second bar.  When the bending pin was returning to the home position, it picked up the second bar. As the employee reached for the bar, his left index finger was caught between the pin and rebar, amputating the first digit.",0
An employee was operating a fiber optic rewinder when his right index finger was caught and pulled by the machine. His finger was amputated above the knuckle.,1
"On May 24, 2016, at 6:30 a.m., an employee was helping to guide a platform into position while a coworker used a crane to lift it. While guiding the platform, the employee's fingers entered the open walking surface grating. He suffered hand and finger injuries, including possible broken bones and/or finger amputations.",1
"An employee bumped a running pedestal fan while reversing a forklift, and the fan fell toward him. When he reached out to stop the fan, his right fingers went through the guard, amputating his right middle fingertip and lacerating/contusing his pointer and ring fingers.",0
"An employee was changing over the assembly station. After she changed out the pop-up plate, she restarted the machine. The machine failed to cycle properly and a piece became stuck. The employee's hand then became caught in the cycling device. She sustained several right-hand fractures and a severe laceration by her right thumb.",1
"An employee was helping to troubleshoot hydro-blast equipment. The hydro-blast operator lost control of the equipment and hit the employee with high-pressure water. He sustained lacerations to his hand and abdomen, as well as an abdomen injury that required surgery.",1
"An employee was checking the fluids on a forklift when he lost his footing. His right arm was impaled by the forklift's muffler guard, tearing an artery, tendons, and muscles. He was hospitalized.",1
"An employee was using a ladder to clean the fascia at a residential home when he fell to the surface below, suffering a broken right arm and a head injury. He was hospitalized.",1
"While walking, an employee tripped over a rolled up mat. She was hospitalized.",1
"An employee was pulling cable from a 4160-volt switch gear when the cable made contact with an energized spark arrestor, causing an arc flash. The employee suffered burns to the face and both hands.",1
"An employee was removing the last bolt from the joint bar that holds the rail line in place when the rail abruptly shifted, hitting the employee and fracturing his left foot. He was hospitalized overnight.",1
"An employee was driving a forklift to move materials when a piece of material rolled off the stack, causing the forklift to pitch forward and then return to the ground. The employee struck the windshield, rupturing his discs.",1
"An employee fell through a roof skylight to the floor, breaking his arm.",1
An employee was working on a ladder when another employee pushed the trash cart filled with drywall into the ladder thereby causing the employee on the ladder to fall and shatter his knee.,1
"An employee was working at a tank in the fryer room when cooking oil and water mixed, causing a reaction that created pressure and made the lid come off the tank. The employee's right-side body was burned by the oil and water overflow.",1
"An employee was watching the contractor crane up materials that had been taken from a truck when he noticed a tag line near the materials. He grabbed the tag line to move it to the side. As he grabbed it, the crane began the lift and the line became tangled in his hand, amputating his right index finger between the first and second digits.",1
An employee was adjusting the rollers of the rip saw to unjam a piece of wood. The piece of wood kicked back and hit him on the stomach causing a laceration.,1
"An employee fell approximately 8 feet off of a ladder while hanging a banner, injuring the left ankle.",1
"While sweeping his work area, an employee struck his head on the lid of a metal storage container. He suffered a concussion and was hospitalized.",1
"An employee was using a table saw to cut some weed wacker cord when the cord became tangled and pulled the employee's left-hand fingers into the blade. Two of the employee's fingers were completely amputated, and one was partially amputated.",0
"While moving a lower power train brake assembly with an overhead crane/lifting device, an employee's left thumb was pinched and amputated in a pinch point.",1
"An employee was backfilling sugar from a sugar silo into a tanker truck when a lock on one of the trailer hatches gave way and released significant air pressure, throwing the employee to the ground. The employee broke the lower left arm and right wrist, requiring surgery.",1
"On May 24, 2016, an employee was helping to place sections of concrete barrier with a track hoe. One piece shifted and fell on the employee's leg, fracturing it and requiring surgery.",1
"An employee was inside an open-top trailer using a pendant-operated crane to load packages of extrusions. A load weighing approximately 700 pounds, and measuring approximately 24-feet-long by 2.5-feet-wide, was being moved with straps and loaded onto an existing stack of materials. The employee was positioned between the load and another stack of materials. The employee was unhooking the load when the extrusions inside the package shifted and caused the newly set load to slide and trap the employee between the bundles. The employee suffered spinal fractures, two broken ribs, and a left pneumothorax injury.",1
"An employee on a man lift was repairing the rudder of an aircraft when someone else powered the aircraft. His right hand became caught in the rudder, which then broke his arm.",1
"On May 24, at approximately 2:40 p.m., an employee was loading a delivery truck with panels. The employee went to load a top-level panel on the stack when the panel slid down, catching and amputating the employee's right pointer fingertip.",0
"An employee climbed a ladder to the top of a railcar. As he was transitioning to a handhold, he lost his balance and fell approximately 10 feet to the ground, separating his hip.",1
Three employees were using a pry bar to free a bridge that occurred on a furnace when the furnace exploded. One of the employees was hospitalized with severe burns.,1
"An employee was working from an aerial lift to install purlins on a steel shed when the shed shifted and collapsed. The collapsing building struck the aerial lift, causing it to turn over. The employee hit the ground, breaking his hip.",1
An employee was cutting wood with a hand-held electric saw when the saw slipped and severely lacerated the employee's upper left leg. The saw was unguarded at the time of the incident.,1
"An employee tripped over a box and fell while sweeping the floor, fracturing her left femur.",1
"While pulling a drilling pipe, the pipe broke and the jack fell onto the employee's foot crushing the steel toe portion into his foot.",1
"An employee was operating a stand-up forklift, backing away from a dock door, and pulled into the path of another stand-up forklift resulting in three fractured toes on the left foot.",1
The employee was on the second step from the floor of an A-frame ladder when she lost her balance while hanging decorations in the racetrack area. She was admitted to the hospital for surgery on her broken right ankle.,1
"An employee was delivering parts when the employee's vehicle became stuck. As the employee attempted to dislodge the vehicle, the grass caught on fire and the employee fell approximately 6 to 8 feet into a ravine. The employee suffered a second degree burn to the left forearm, a broken rib, a punctured lung, and a broken collarbone.",1
"While exiting a bin truck, an employee fell backwards to the pavement, suffering back and head injuries, as well as a small laceration to the back of the head.",1
An employee fell from an A-frame ladder to the concrete floor while pulling/installing 277-volt wires for new indoor lighting. The employee sustained a skull fracture and brain hemorrhage.,1
"An employee was plumbing in a separator on a natural gas line that had pressure in it. The line blew up and knocked the employee to the ground, spraying him with dirt and rocks. He fractured his skull and suffered cuts to his arms.",1
An employee was standing on an extension ladder when the ladder began to slip. The employee jumped approximately 5 to 6 feet off the ladder and fractured the left ankle.,1
An employee was removing tong dies from hydraulic tongs when the tongs engaged and broke the employee's left forearm.,1
"An employee was operating a fork truck to transport a box to a stage in front of a box dumper. When he dismounted the fork truck and walked in front of the load, the truck moved forward and pinned him between the box dumper and fork truck forks, fracturing his lower left leg.",1
"An employee was operating a pallet dismantler when he dropped a pull bar onto the dismantler table. As he attempted to retrieve the bar, his left hand contacted the blade, amputating his middle finger. The machine was running at the time of the incident.",0
An employee's left thumb tip was amputated while he was cutting a bearing with a chop saw.,0
An employee was feeding rolls of plastic material into a shear when his left index fingertip was amputated.,1
"While sweeping a work area, an employee vomited and became disoriented from heat exhaustion, requiring hospitalization.",1
"An employee was cutting some steaks on a band saw for a customer. He had finished cutting the steaks when the customer called out and startled him. The employee jumped and his finger went into the blade, suffering a partial amputation.",0
"On 5/25/2016, at 1:15 p.m., an employee was cutting a stair rail with a saw when the safety guard malfunctioned. The saw then jumped and cut the employee's left forearm.",1
An employee was trimming trees when his left index finger was pinched and amputated between a fallen branch and the bucket of the bucket truck.,0
An employee was placing a wooden block under a steel coil that was being held by a forklift. The coil then slipped off the forklift and smashed the employee's left index finger against the wooden block.,1
"An employee was helping to set two risers for a new underground utility vault when the operator lowered the riser onto his hand, fracturing his left index finger. He was hospitalized with hand swelling.",1
"An employee slipped while walking up the stairs on a train car. He fell approximately 24 inches and landed on his right elbow, requiring elbow surgery.",1
"An employee was using a pry bar to align a flange when the bar slipped, causing him to fall backward and fracture his left ankle. He was hospitalized for surgery.",1
An employee was struck by an automobile while working on a roadway in a work zone.,1
"While delivering packages, an employee began to feel ill and experienced cramping throughout his body. He was hospitalized for dehydration.",1
An employee was walking between a cooker and a pot when a water hose began to whip around and sprayed him with hot water and steam. He suffered a second degree burn to his upper back.,1
An employee was loading a barge when he became ill due to dehydration.,1
"An employee was working off a 24' ladder on a bundled secondary and fell approximately 9' off the ladder resulting in a broken shoulder, wrist and ribs.",1
An employee was clearing a jam when his finger was smashed by two rollers. His ring fingertip was surgically amputated.,0
"An employee fell from a 6-foot ladder, fracturing her arm and requiring hospitalization.",1
"While an employee was operating an order picker to move a stack of empty pallets, some of the pallets got caught on the rack and pushed into the employee's ribs. The employee was hospitalized for treatment of three fractured ribs and a bruised spleen.",1
An employee was cleaning the engine of an excavator with starting fluid when an arc sparked and triggered a fire on his sleeve. He was hospitalized with burn injuries.,1
"An employee was helping to perform maintenance on an elevator and was handing a mechanic a wire cable when the cable became caught on the elevator, amputating the employee's right arm and lacerating the leg.",1
"An employee was returning to her vehicle after delivering a parcel to the front porch of a house when she rolled her left ankle on the sidewalk. She then lost her balance and fell to the sidewalk, fracturing her right patella.",1
"A work crew was wrapping the steep tank with poly to protect it against the weather. To do so, the crew was moving the grating away from the tank so that they could slide the poly down and tie it to the tank. While setting down the end of the grating, the injured employee's left fifth finger became caught between the grating and the I-beam.  When he went to pull his finger out, he partially severed the fingertip, which had to be surgically amputated.",0
"An employee was using a portable grinder to cut a metal stand when the grinder wheel shattered and caught his glove, pulling his hand into the grinder blade. He required surgery and hospitalization for a hand laceration.",1
"After loading hides onto a pallet, an employee stepped backwards and tripped on a lower guardrail. He fell backwards and struck his head on concrete, suffering a concussion.",1
"An employee had just climbed down a lighting tower. While moving from the tower to the stage, the employee fell 6 feet off the stage to the ground level below, suffering a cranial injury, nose fracture, and facial fractures.",1
An employee was cutting a wood board when his left-hand middle finger was cut by the circular saw.,1
An employee was cutting a 45-degree angle on a piece of 2x4 wood when the circular saw kicked back. The saw blade severed multiple tendons in the employee's forearm and penetrated the bone just above the wrist.,1
"An employee climbed a ladder to assess the next level of a metal roof. He stepped on a shingle and fell 8 feet through the roof to the ground, breaking his right index finger, left middle finger, right hip, and back.",1
"An employee was cutting a pipe when a water solution with ammonia came through the pipe and contacted the employee. The employee suffered a first degree burn to the right forearm, as well as trachea and esophageal irritation.",1
An employee was pulling a walkie pallet jack from under a pallet when his right-hand thumb was caught and crushed between the handle and the unit.,1
"An employee was operating a stand-up high reach truck.  As the employee was traveling, the lift struck a pallet that was on the floor.  When the lift struck the pallet, the employee was ejected from the lift and struck a nearby rack where he injured his lower back and fractured his pelvis.",1
"While assisting in material handling operations, an employee's finger was crushed between a skid steer fork and a concrete slab. The employee suffered a fingertip laceration resulting in amputation and fingernail loss.",0
"An employee was attempting to make an adjustment on the press. As the employee was releasing the tension on the ""signature,"" the employee's right pinky finger was caught between the level and another part of the press, amputating soft tissue and the nail.",0
"An employee was pushing a cart into an elevator when she fell to the elevator floor, breaking her left kneecap (patella) and requiring surgery.",1
An employee was climbing a ladder at a construction site when he suffered cramps and started feeling dizzy and lightheaded. He was hospitalized for heat stroke.,1
"An employee was cleaning the inside of a finished mobile home. She was using a two-step stool to get off the home when the stool moved, resulting in a broken left ankle. She was hospitalized.",1
"An employee was standing near the area where an auger crew was preparing to drill a hole to install a light pole. A pin holding the auger broke, causing it to fall. When the auger fell, it hit a security fencing and then landed on the employee's right foot, smashing the fourth and fifth toes.",1
"An employee was drilling a hole in the foundation when a cinder block fell from the third floor and struck him, causing contusions to his lower back and kidney. He was hospitalized.",1
"An employee was draining fluid from a cut pipe.  He took the magnet, which was raised by a crane, and raised one end of the two pieces of pipe. One of the pieces rolled loose of the magnet and the material fell onto the employee's left index finger, amputating the tip.",1
"An employee was attempting to lift a concrete slab/rock into the bucket of a front-end loader. The slab slipped, and the employee's right index fingertip was crushed and amputated between the slab and another slab.",0
"An employee was struck by an empty cargo cart, which fractured his left leg.",1
An employee slipped off a ladder while descending and broke the tibia and fibula at the knee. The employee was wearing a fall protection harness while working on the ladder.,1
"While doing plumbing work at a resident's home, the worker was bitten by the home owner's cat. The worker was admitted into the hospital for treatment when the wound became infected.",1
"The injured employee along with his co-worker were lining a farm implement onto the farm tractor's hitch. As the farm implement was being aligned with the ball of the hitch, the employee's right pointer finger got caught between the implement and the ball of the hitch resulting in the amputation of his finger from the nail up. The employee was admitted to the hospital.",1
An employee was exposed to electrical current while setting up a supplemental lighting/camera resulting in blisters and electrical burns on a hand.,1
"An employee was cleaning stairs using a handheld electric grinder with a fine wire brush. The wire brush became caught up in the employee's pant leg, causing the grinder to make contact with his right ankle. His ankle was lacerated to the bone, requiring hospitalization.",1
An employee was checking a component under a conveyor when a section of the conveyor system came down and struck him.,0
"An employee tripped on the wheel of a resident's wheelchair and fell to the ground, breaking the hip.",1
An employee was pinned under the bumper of an 18-wheeler when the truck came off the jack while the employee was changing the front tire. The employee suffered broken ribs and internal injuries.,1
"An employee was feeding lumber into a roller system. While he was trying to free a piece, his hand was pulled into the roller, pinching his finger between the board and the roller. His left ring finger broke and was amputated.",1
An employee was injured when condensate spontaneously released while the employee was starting up a coker.,1
"On May 27, 2016, at approximately 5:00 p.m., an employee was escorting a discharged patient to their vehicle in the driveway when another vehicle struck the employee. The employee suffered a fractured skull and possible fractured pelvis.",1
"An employee was placing a plastic sleeve on a filler tube when the ladder he was using moved, causing him to fall to the facility floor and fracture his skull and wrist.",1
An employee drove up in his truck to access a standpipe by the road. He got out of the truck and began lowering an electronic probe down on a reel and cable to measure the depth to water. The truck then moved and pinned/crushed his leg between the bumper and the standpipe. He was hospitalized.,1
"An employee was cutting/turning stainless steel on a summit lathe. As the shavings came off the stainless steel, they lacerated the base of his left thumb, requiring stitches and hospitalization.",1
"An employee fell off the back lift of a delivery truck onto the road, breaking a leg.",1
"An employee was cleaning around the dough machine when the employee's gloved hand became caught in the auger, amputating the left and ring fingertips.",0
"An employee was a passenger in a golf cart used to transport people around the site. The driver was traveling to a building directly in front of them to get needed parts, but realized he might find the parts in another building to the left. As the driver turned to the left, the employee fell off the cart and struck her head on the pavement, fracturing her skull.",1
"An employee was pushing a lift onto an elevator when the employee's hand was caught between the lift and the elevator, amputating a finger.",0
"An employee was riding on the passenger side of a baggage tug being driven by a coworker. The driver made a sharp left turn, and the employee fell off. The baggage cart, which was being pulled by the tug, ran over the employee and fractured his left ankle.",1
"As she was entering the building, an employee's left hand was caught in the door.",1
An employee slipped on wet pavement and broke the right fibula and ankle requiring surgery.,1
An employee was working on the case packer line and amputated a fingertip.,0
An employee walking down the hallway with non-skid shoes. The shoes stuck to the tile floor and  the employee fell fracturing the left hip.,1
"An employee was injured on or about May 27, 2016, when an employee was getting ready to remove a base ring from a tank. The employee was standing on a ladder on the truck. A second employee was operating a crane to the west end. When the operator moved the west crane, he bumped into the east crane holding the base ring. The tank on the truck was moved 3 feet knocking the employee on the ladder in the truck off the ladder. The injured employee suffered fractured ribs and damage to the left kidney.",1
"An employee was using a hand held circular saw to cut a strip (1/2"" - 1"") off a large, fat piece of plastic (4' X 8'). At the end of the cut the piece (strip of plastic) flipped up and removed the very tip of his right index finger.",0
An employee was hospitalized with a severe laceration to his arm when a saw blade kicked back while cutting pipe.,1
"An employee was installing broadband services at a private residence. While descending the wooden stairs of a walking path at the residence, the employee slipped on the wet surface and heavy vegetative growth, fracturing a vertebra.",1
"An employee was closing a gate. A forklift driver came to help the employee. The unattended forklift then went backwards and pinned the employee against a wire fence, fracturing the employee's pelvis.",1
"An employee was attempting to adjust the arm on an active machine, which was between a set of rollers set 12 to 15 inches apart. The employee's hand was caught between the arm and a roller, burning his skin and requiring hospitalization.",1
"An employee was adjusting a machine when his right-hand middle finger came in contact with the chain drive, amputating the fingertip. The machine was in operation at the time of the incident.",1
"While driving a straddle carrier, an employee collided with a second straddle carrier being driven by a coworker. The employee's carrier tipped over, amputating the employee's left leg above the knee.",1
"While operating a mail-processing machine, an employee's head became trapped between the equipment and a guard, fracturing the skull, breaking ribs, severing ears, and damaging vertebrae.",1
An employee was cleaning gummed up bread crumbs out from under the conveyor with a compressed air wand resulting in the amputation of the right arm just below the elbow.,1
An employee hoisted the lubricator up off a well head using a winch and was inspecting the tool stream. The winch malfunctioned and continued to raise the lubricator up which was 8 feet long. It was raised approximately 15 feet off the ground. The cable snapped and the lubricator fell striking the employee and causing a laceration to his chest approximately 6-8 inches long and 1 1/2 inches deep.,1
"An employee was emptying a pot of boiling water in to a colander and the water spilled, burning the employee on the chest.",1
"An employee's arm was pulled into nip rollers while working at a drying rack, requiring hospitalization for tissue damage.",1
"On May 30, 2016, at approximately 6:50 p.m., an employee was walking on the workroom floor in the automation area when her shoelace became caught on a float tire. She fell to the floor, hitting her right elbow and the joint between her right hip and thigh. She required hospitalization and surgery for a broken hip.",1
"An employee was placing items on a shelf from a ladder. On the way down, the employee fell off the ladder and hit their head on the ground, requiring hospitalization.",1
An employee was hospitalized when his right hand was caught in a dryer belt.,1
"On 5/31/2016, an employee was servicing an MRI machine when the machine magnetically energized and the employee's metal knife was drawn into his eye socket resulting in retinal detachment causing blindness.",1
"An employee stepped off a curb and fell, breaking his left hip.",1
"An employee was removing a forklift's brakes as part of periodic maintenance when the brake's drum (weighing 150 pounds) fell down, amputating the employee's right index finger without bone loss.",0
"An employee was blowing shot dust from a shot blast machine. When the employee tilted the machine, it became unhooked and hit the employee in the back and shoulder. He fractured his back and was hospitalized.",1
"An employee tripped over a power cord in a patient's room and fell, fracturing her right humerus.",1
"A stack of pipes were placed on a rack on top of rollers on the floor. The employee needed to blow the pipes out, so he went to get the air line. He was walking backwards toward the rack, pulling the hose, when his leg made contact with the rack.  His pant leg was caught in the rollers, and his calf was pinched between the rollers and the rack. He tore his Achilles tendon and punctured his leg, requiring hospitalization and surgery.",1
An employee suffered heat exhaustion while picking up trash.,1
A worker was operating wood machinery and suffered an amputation of the left pinky fingertip.,0
An employee was injured while operating a handheld drill. The drill bit slipped and struck the employee's left hand while she was holding a piece of plastic and drilling.,1
An employee was standing in front of racking that held bundles of steel. The racking tipped forward and the top bundle of steel slid forward off the rack striking the employee and crushing their legs.,1
An employee was struck by 12 sheetrock panels that tipped over and fell onto and broke his left leg.,1
An employee was struck by the outriggers of a backhoe resulting in a severe leg laceration and a broken pelvis.,1
An employee operating the pneumatic E-Unit press suffered an amputation to his left thumb from the nail bed up.,0
An employee was running the steam flaking machine and amputated four fingers on the right hand.,1
"On or about May 31, 2016, an employee was hospitalized due to a heat-related illness while engaging in physical fitness training.",1
An employee was struck by a steel reel that fell off the lift table resulting in a fracture of the left leg that required surgery.,1
An employee was loading produced water and conducting a vehicle inspection when the truck caught on fire. The employee suffered burns to his face and both hands.,1
"On May 31, 2016, at approximately 7:00am an employee received a laceration with cuts to the lower artery and three tendons of his left forearm when the 140 lb. bulkhead he was carrying fell from his hands. The employee was hospitalized for surgery.",1
An employee was hospitalized due to a fall from his trailer resulting in four broken ribs and a punctured lung.,1
"An employee was placing trash into the compactor. The employee lost their balance and stepped back, missing the step and falling to the floor. The employee suffered contusions to the left leg and foot.",1
An employee's finger was caught in a chain sprocket when he was replacing a belt resulting in amputation of the right pinky finger to the first knuckle.,0
An employee was setting wood blocks under the stabilizer of a backhoe when his finger was pinched. The right index finger was partially amputated.,0
An employee injured the tip of the left ring finger when it came in contact with the rotating chuck on a hand-held power drill.,0
An employee was resizing a spider OD on a lathe and polishing it when his left index finger was caught in the machine.,1
An employee was chased by a dog and while running away the employee fell on cement and broke a rib.,1
An employee was restarting a machine while standing in front of the vent of the RTO and was burned on his upper extremities.,1
"An employee was walking back to her department, tripped on a display located on the sales floor, and fell breaking the left arm.",1
"On 5/31/16, a worker sustained the amputation of several fingers from his left hand while attempting to clean fluff material from the side of a doffer roll on a carding line while the machine was running.",0
An employee was moving a glass mirror when it fell and he was cut by the glass. The cut severed an artery and two tendons in the wrist requiring surgery to repair.,1
"An employee was delivering mail when she slipped on a gravel driveway and broke her leg, requiring surgery.",1
"An employee was installing bat insulation at a residential construction project. A nearby stack of 13 foot long sheet rock was knocked over and struck the employee on the upper left leg, resulting in a fractured bone.",1
"An employee was attempting to get his pallet jack out of the battery charging area when he was pinned between the jack and a racking system, breaking his tibia.",1
"An employee was discussing delivery orders with a forklift operator when the forklift operator ran over the employee's foot and ankle. The employee's right ankle and foot broke, and the pinky and fourth toes were crushed.",1
"While picking up trash in a residential neighborhood, an employee suffered from heat exhaustion.",1
An employee was climbing a ladder when a bracket came loose and the ladder fell to the side. The employee suffered a compound fracture of the lower leg.,1
An employee was helping another employee move a skid of metal. The skid rolled over onto the right pinky finger of the injured employee resulting in amputation of the finger at the first joint.,0
"On or about June 1, 2016, an employee was on the edge of a dumpster when he fell approximately 6 feet to the concrete below, injuring his head, shoulder, and spine and requiring hospitalization.",1
An employee was walking around the press and tripped on a floor mat falling forward and landing on his right hip. The employee was hospitalized with a right hip fracture.,1
"On June 1, 2016, an employee was hospitalized and treated for heat exhaustion while collecting solid waste.",1
"An employee was wrapping a box of tomatoes when he was struck by a forklift, fracturing his right ankle.",1
An employee was working at a tablet machine when the discharge chute amputated the employee's fingertip.,0
"An employee was assembling a ladder. While holding a component of the ladder, the employee's right pinky finger was crushed when another employee pushed part of the hand rail. The fingertip was amputated.",0
"An employee was storing purlin coil using a crane when the crane and coil fell on the employee, injuring both legs.",1
An employee fell from the second floor to the first floor of an apartment complex under construction. The employee sustained multiple broken bones and was hospitalized.,1
"An employee was investigating the cause of a mechanical malfunction on a centrifuge used to process waste water. While the employee was pulling on a belt and pulley mechanism, the weight of the belt crushed the employee's left index finger, requiring surgery and overnight hospitalization.",1
"An employee was cutting lettuce when he slipped and fell on the wet floor. He landed on his right wrist, fracturing his distal right radius and requiring surgery.",1
An employee was changing a pin on a pneumatic cylinder when the cylinder's pressure released and amputated the employee's fingertip.,0
An employee was checking brakes on a customer's vehicle in the parking lot. The car rolled and the employee's finger was caught in the wheel resulting in amputation of the right index fingertip.,0
"An employee was dismantling a conveyor system when a piece of the conveyor fell and hit him on the back, breaking his rib and deflating a lung.",1
"An employee injured their back, head and hip after falling from a ladder.",1
"On or about June 1, 2016, at approximately 6:00 a.m., an employee was standing by the food-made machine when a saw blade came off the machine and lacerated both of her legs. She was hospitalized.",1
"An employee stepped into the block machine to clear a jam. When it was cleared, the machine activated and the employee's ankle was pinned under the machine and fractured. The employee's toe was also fractured. The machine was not guarded at the time of the incident.",1
"While soda blasting a wall covered in tobacco fines, an employee experienced nausea and trouble breathing. He was hospitalized with tobacco/nicotine poisoning.",1
An employee was operating a stand-up powered industrial truck and making a left 180-degree turn to pick up a pallet. The employee's right elbow then became pinned against the outside frame of the truck and a cross member of the racking system. The employee fractured and punctured the right arm.,1
"An employee was using an overhead crane to load over 8,000 pounds of material onto a flatbed truck. As he sat the material down on the truck, one of the bundles of material shifted and caused the employee's hand to become caught in the crane's chain, partially amputating his right middle finger.",1
An employee suffered a finger amputation while operating a drill.,0
An employee was loading a part on a rack and caught a hand between the part and rack resulting in amputation of the left middle finger above the knuckle.,0
An employee was on the roof of a commercial building inspecting for a water leak. The employee fell through a skylight approximately 16 feet to the concrete floor resulting in broken bones on the face and a fractured elbow.,1
"An employee was about to clear a blockage on a 4-foot conveyor when he slipped and fell to the ground, landing on and bruising his hip.",1
"An employee was cutting metal with a miter saw when the saw jammed and shot the metal backwards into the employee's hand, cutting a right thumb tendon.",1
An employee was stepping down from the cab of the loader when the bottom step broke and the employee landed on both feet at the same time causing tendon damage to both knees.,1
"On June 2, 2016, at 1:45 p.m., an employee fell 4.7 feet from an outside stairway while attempting to remove a black snake from the outside lip/ledge of the stairway. He broke five ribs and injured his spleen, requiring hospitalization.",1
"An employee was laying sheets of plywood and was clearing debris when his right hand was caught between two plywood sheets. A coworker then tapped the boards together while the employee's finger was still between them, amputating his index fingertip.",0
"While collecting samples, an employee detected an odor, lost consciousness, and fell down a set of stairs. The employee was hospitalized and suffered an infection.",1
An employee was steaming a pipe when steam burned the employee on both legs below the knees.,1
An employee performing marketing was hospitalized due to dehydration.,1
"An employee was cutting 4-inch rigid conduit pipe with an electrical band saw while on a step-ladder. After the section of pipe was cut free, the employee carried the pipe down the step-ladder, stepping on the extension cord that was energizing the band saw. His ankle rolled, causing him to lose his balance and lose his hold on the pipe. He fell and reached out with the hand holding the pipe to try and gain some balance. The pipe fell from his shoulder and struck him on the hand, crushing two fingers and amputating another on his right hand.",1
"An employee's hand was on a cart-tipping mechanism when the mechanism engaged and pinched his right-hand ring and pinky fingers, requiring surgery.",1
An employee was crating merchandise and using a pneumatic nail gun to attach the boards. A nail was fired into his right wrist.,1
An employee finished adjusting the blades on a four-headed planer machine. He then shut off the motor and was wiping oil off the machine when a blade grabbed his rag and pulled his hand into the cutting head. The blade amputated his right thumb and index finger and damaged his right middle finger. The blade was still moving at the time of the incident.,1
"An employee was climbing a ladder and attempting to step onto a roof when his foot slipped. The ladder gave way and he fell 13.5 feet to the ground, fracturing his wrist and requiring surgery.",1
"An employee was trying to clean the conveyor belt when his right hand was caught by the conveyor, amputating his ring fingertip.",0
"An employee was operating a baler. When he hit the hydraulic switch for compaction, the baler door was pushed open and hit his right ribcage, fracturing four ribs requiring hospitalization.",1
"An employee was grinding tubing and then turned the grinder off. He opened the grinder and attempted to remove the ground-up tubing. The blades were still moving at the time, and they amputated three fingers on his left hand and two fingers on his right hand.",0
"An employee was loading equipment into a truck when his finger became lodged between a road case and a piece of wood, amputating his left second fingertip.",0
An employee was unloading supplies from a truck when a metal pole struck and broke the employee's leg.,1
An employee was replacing a bearing on a shaft and was using a sledge hammer to seat the bearing when he suffered pain in his lower back. He was hospitalized with a broken blood vessel in the lumbar back area.,1
"An employee was lowering tilt wall panels from an aerial lift with a rope. As the employee attempted to catch a panel, the rope removed the skin from the right pinky finger. The finger had to be amputated, and the employee was hospitalized.",1
"An employee was walking down a stairwell when he missed the last step, lost his balance, and bumped his head on the wall, suffering broken vertebrae.",1
"An employee had been cutting trees in an area. While walking back up the road, the employee was struck by a falling tree, suffering broken ribs and a collapsed lung.",1
"An employee was taking scaffolding down when the chain hit the safety on the hook. The safety would not hold, and the chain could not handle the load. The employee pulled his hand away and the chain nipped his fingers, amputating his left pinky fingertip and fracturing his left ring finger.",0
"At 11:20 a.m., on June 2, 2016, an employee was attempting to adjust the air flow of the stamping press when his right little finger was caught in the press bumper that is used to stop the die from bottoming out. His finger was surgically amputated at the first joint.",0
"An employee was putting a tote of fermentation additive on a process sump when a chemical reaction occurred and a cloud of chlorine dioxide came out of the sump. When the employee went to shut off the valve, he inhaled the chlorine dioxide and suffered respiratory damage, requiring overnight hospitalization.",1
An employee was changing the shock tip on the plunger of a die-cast machine when the machine retracted and amputated the employee's right thumb between the thumbnail and first knuckle.,1
"An employee was tarping a bridge beam and was holding the cable of the shuttle lift's lifting mechanism. When the lift operator lifted the beam, the employee's hand was pinched where the cable entered the pulley, amputating three right-hand fingertips.",1
"An employee fell approximately 15 feet while climbing down an extension ladder, breaking a right lower leg bone.",1
"An employee and a coworker were lifting up a manhole to see the direction of a pipe. The lid was lifted and held vertically. Some dirt started to fall into the manhole, and the employee used his hand to brush it away so it did not fall into the manhole. The lid slipped off the tool and smashed the employee's left thumb between it and the casting, amputating the end of his left thumb.",0
"An employee fell while walking in the medical clinic area, breaking the left elbow and requiring hospitalization.",1
"An employee was re-assembling a cooler rotary valve after shut down. Before installing the cover, he felt inside the piping to check for moisture when the blade made contact with his left-hand middle finger, partially amputating the fingertip under the nail.",0
"An employee was pushing a cart through the back room when she slipped on a strawberry and fell, fracturing her right kneecap. She was hospitalized.",1
An employee was offloading a bundle of steel pipe from a flatbed truck when his fingers were pinched between the pipes. His right-hand middle and ring fingers were amputated.,0
An employee was attempting to unjam a bag filling machine when the machine's blade amputated his right middle fingertip.,1
"An employee was walking up a steep roof while carrying a staple gun when he slipped and discharged a staple into his knee, requiring surgery.",1
"An employee was driving a forklift to move a pallet when he dropped a water bottle. As he went to catch it, the forklift turned into a bin. His left hand was caught between the bin and the forklift, amputating half of his left index finger.",0
"An employee was walking to assist a coworker on another machine when he tripped over a pallet strap that was on the floor and fell to the ground, breaking his femur and requiring hospitalization.",1
"An employee was operating a stand-up lift truck when the truck struck a concrete support beam. The employee's left foot contacted the beam, breaking several bones.",1
"An employee was cutting wood for pallets with a chop saw when the wood kicked back, causing the employee's left hand to contact the moving blade. The employee's left thumb, index finger, and middle finger were severely cut.",1
"An employee was changing a flat tire on a pickup truck. While the employee was jacking up the truck, the jack slipped off, causing the truck to fall. The employee's left forearm was caught and crushed between the fender and the tire, requiring surgery.",1
An employee fell 4.6 feet from the top of the recycle pulper canopy and broke his left tibia.,1
"An employee was operating a manual assembly cell and placed a connector into the machine. The placement of the part was incorrect, so she attempted to reposition the connector. At the same time, a ferrule nut fell onto the finger activation switch, causing the machine to operate and partially amputate the employee's right index finger.",0
"An employee's left arm was caught in the rollers of a print-line press, breaking left-hand bones.",1
An employee was attempting to mount a heavy-weight headboard onto the wall when he felt pain in his back. He was hospitalized with a back injury.,1
"An employee fell approximately 30 feet to the ground while installing a truss, suffering facial fractures, as well as injuries to the spleen, liver, and kidney. The employee was hospitalized.",1
"On Friday, 6/3/16, an employee was loading empty baskets onto a conveyor when his right gloved hand was caught by a rotating sprocket on the conveyor belt, partially amputating his right thumb.",0
"A maintenance employee was unloading metal bed frames from a truck at an off-site scrap yard. His finger became caught in the bed frame and/or caught between the bed frame and the side of the truck, partially amputating his left first fingertip. He was hospitalized.",1
"An employee tripped over a resident's wheelchair and fell, fracturing the right hip and right wrist.",1
"An employee on a ladder was working on a circuit that he thought was de-energized. He grabbed the circuit with lineman pliers. He was knocked off the ladder by a coworker, sustaining a shoulder fracture and shock injuries.",1
"An employee was removing a tree from a powerline to restore electrical power to a neighborhood. The employee was on a de-energized pole when an electrical flash occurred, burning the employee's chest and torso.",1
"On June 3, 2016, an employee was attempting to clear a jam from a slicer machine when her right ring and middle fingers were amputated. The machine was running at the time of the incident.",0
"An employee working on a paving crew started to feel dizzy, so he went to rest under an umbrella. He then passed out and fell, hitting his face, forearm, and hand on the just-poured hot pavement. The employee suffered burns to his left-side face, forearms, and hands. He was hospitalized.",1
"An employee was driving a stand-up forklift while retrieving parts when he struck a parts rack with his lower leg, fracturing it.",1
"While working with the farm owner, the employee moved behind the backhoe into a blind spot and was knocked down. His legs were run over by the backhoe.",1
An employee was on the scene of an ambulance call when a bee stung her arm and leg. She suffered an allergic reaction and was hospitalized.,1
An employee was trying to remove something that was caught in a film cutter machine when the knives severed the employee's right index finger at the first digit. The machine was running at the time of the incident.,1
"An employee was moving a rack of material to the pickling tank. When he sat the rack down, his left middle finger was crushed between two pieces of material.",1
An employee was opening a vehicle door with his left hand when the passenger side of a shuttle bus caught and amputated his left pinky finger.,0
"An employee was running down the driveway after a fleeing patient when he tripped and fell, injuring his left shoulder and fracturing his elbow. He required hospitalization and surgery.",1
"While transporting a horse by rope, an employee lost control of the horse. The horse trampled and stepped on the employee several times, causing a back injury and abrasions.",1
"An employee tripped while walking downstairs, fracturing her right ankle and requiring hospitalization.",1
An employee was clearing an obstruction on a silo gate when the gate closed on and fractured his finger.,1
An employee was adjusting the slitter blade position of a paper machine when his right thumb was caught between the blade and the slitter band resulting in the amputation of the tip of the right thumb without bone loss.,0
An employee was cutting steel with a cutting torch while in a scissor lift. The steel beam twisted and turned the scissor lift over with the employee inside. The employee suffered a broken left femur.,1
An employee was working at a folding machine when his fingers were caught in the machine's metal fingers. He was hospitalized.,1
"An employee was adjusting a ""spud"" when his right hand was caught and crushed between the ""spud"" and a locking pin. His middle finger was medically amputated.",1
"An employee tripped and fell at a door threshold, fracturing her left elbow.",1
"On or about 6/5/2016, at approximately 14:15, an employee was cutting chicken breast with a handheld knife when the knife slipped and his thumb contacted the blade. His right thumb was amputated.",0
An employee was sedating a cat for a procedure when the cat broke out of its carrier and bit the employee on a finger. The bite became infected.,1
An employee tripped over wires next to a patient's bed and broke her hip.,1
"An employee's left middle finger was pinched between a metal bin and a hopper, amputating the fingertip.",0
"An employee's right hand was on a safety rail when a tire rack struck and crushed his middle, ring, and pinky fingers. He was hospitalized.",1
"While replacing a damaged metal carport awning, an employee fell approximately 6 feet from the awning to the ground below. The employee suffered head, face, neck, and mouth injuries, requiring overnight hospitalization.",1
"An employee was operating a standup reach truck, performing a pull-down function. She was scanning the barcode when her right hand was pinned between the reach truck and the racking system, causing soft-tissue damage and multiple fractures.",1
"An employee working in the basement of the paper machine was exposed to a hot, humid environment and was hospitalized for heat stroke.",1
"On June 5, 2016, an employee was unloading a semi trailer using a forklift. She picked up a load, drove approximately 8 feet, and exited her lift. The forklift then rolled forward and pinned her between the load on the lift and another skid, breaking two legs and requiring hospitalization.",1
"An employee was repairing dough dividers and was releasing tension on the sprocket and chain using a screwdriver. The screwdriver slipped, and the employee's thumb tip was caught and amputated in the chain and sprocket assembly.",0
"On 6/5/16, at approximately 12:15 p.m., an employee was climbing onto a mobile scaffold to install drywall mud. The employee was ascending an add-on scaffold ladder designed for safe scaffold access when his foot was caught on the second rung. He then fell less than 4 feet, fracturing three vertebrae in his neck.",1
"On June 6, 2016, at 1 p.m., an employee was lining up pasta to thread it through the holes of the pasta press machine when his hand contacted the rotating knives in the machine, amputating his left index fingertip.",0
An employee suffered an adverse allergic reaction to the MMR vaccine and was hospitalized.,1
An employee was exiting a restroom when the self-closing door closed on and amputated her right pinky fingertip.,0
"An employee was changing an RTO source fan belt when his tool slipped and his finger contacted the moving belt and/or pulley, partially amputating his finger.",0
An employee was repairing a die when the die slipped and amputated his left index finger.,0
"An employee was loading effects into an arm cuff when an effect misfired due to a broken wire, causing second degree burns to the employee's right forearm.",1
"An employee was moving a shrink wrap unit when the unit's leg collapsed. The unit crushed the employee's left index finger, requiring hospitalization.",1
"An employee fell from a ladder while performing bee treatment, suffering a compound fracture to the right arm, a broken right wrist, and a broken tailbone.",1
"An employee was offloading steel when the steel rolled off the forklift and struck the employee's leg, breaking the ankle.",1
"An employee was taking a cart out of a storage closet when the door closed and caught the employee's right-hand finger, amputating the fingertip.",0
An employee was exposed to latex balloons and suffered an allergic reaction.,1
"While hanging chickens on shackles, an employee's right ring finger was caught on a shackle, resulting in a finger amputation.",0
An employee was using a utility knife to wrap parts in cardboard when the knife slipped and amputated the middle fingertip.,0
"An employee was observing a back-hoe operation when the back-hoe operator turned the vehicle and struck the employee, who then fell to the ground. His hard hat was knocked off, and his head was lacerated by rocks on the ground.",1
An employee slipped on a wet floor and fractured her lower leg.,1
"An employee operating a forklift struck a pallet and was caught between the forklift and the pallets, avulsing his buttocks.",1
An employee suffered an asthma attack after being exposed to chemical fumes from a nearby floor stripping and waxing operation.,1
"While cleaning a roller, an employee was cut on the forearm by a metal strip.",1
"An employee was closing up the equipment yard and was using his left hand to pull up on the gate. As he was pulling and lifting at the same time, his left middle finger was caught and amputated by the gate roller.",0
An employee was showing a patio door to a customer. The door was on display in a metal frame when it fell off the hinge and onto the employee. The employee suffered a broken pelvis.,1
"An employee was walking in the parking lot when he was hit by a company vehicle, suffering a head injury.",1
"While walking downstairs, an employee fell and fractured the right ankle.",1
An employee's wrist was severely lacerated by a running miter saw.,1
"An employee was driving a forklift behind a coworker's forklift when the coworker suddenly turned. The two forklifts collided, and the employee's left hand was crushed between them, causing fractures and ligament damage. He was hospitalized.",1
An employee was using an excavator to place a concrete barrier rail and crash cushions when the excavator boom moved and pinched the employee beneath a section of crash cushion. The employee suffered a broken left femur.,1
"An employee was moving materials when his finger was caught between a forklift and a glass recycle container, amputating his fingertip.",0
"On or about June 6, 2016, an employee was walking along a corridor when she slipped and fell onto the rug and tile area. She fractured her left leg and dislocated her left ankle.",1
"An employee was smashing down the trash on top of a metal dumpster when he fell 4 to 6 feet, injuring his head, left calf, torso, and scapula.",1
"An employee was driving a flat bed from the south and collided with a forklift truck travelling east in a 3-way stop intersection. The employee in the flat bed was going to make a left hand turn and did not see the forklift truck. Due to the sudden stop, the employee's leg contacted the steel in the cab resulting in a fractured leg.",1
An employee was picking up sample bags of corn from shelves adjacent to a semi-truck. The semi-truck moved forward and struck the employee's ankle resulting in an injury that required surgery.,1
"On June 6, 2016, an employee suffered an arm amputation above the elbow while working with a jack.",1
"On or about 6/6/2016, at approximately 0900, an employee was walking in an aisle way when he was struck from behind by a forklift carrying a steel coil. The forklift operator stopped the forklift, causing the steel coil to fall and contact the employee's foot, amputating his left toes.",0
"On June 6, 2016, an employee performing maintenance work on a furnace platform fell approximately 10 feet, suffering injuries to the abdomen and lower extremities.",1
"On June 6, 2016, an employee was adjusting a powered industrial vehicle battery that became stuck in the automated battery changing station when the battery struck and broke his right leg.",1
"An employee was loading a stone countertop onto a flatbed truck, and his finger was crushed. He was hospitalized for treatment.",1
"An employee was using a chop saw to cut an 8-inch, old clay pipe to replace it with a PVC sewer pipe. The saw kicked back and the blade went through the employee's face shield, lacerating his skin from his right chin to his right ear. He was hospitalized.",1
"On or about 6/6/16, at approximately 10:30 AM, an employee was using the stairway between the first and second floors when she tripped and struck her head on the hand rail and then on the top step. She suffered a concussion and was hospitalized.",1
An employee was replacing the capacitor on a supplemental HVAC system when he received an electrical shock and was knocked from his ladder to the carpeted concrete floor. He landed on and injured his right shoulder.,1
"While moving a trailer outside the building with a trailer caddy, an employee became caught between a second trailer and the trailer caddy handle, suffering an internal, abdominal injury.",1
"An employee was working on a broken power pole. While the employee was cutting wire to clear the pole, it rolled and fell onto the employee's left foot, breaking two bones.",1
"Employees were taking a delivery of long pipe from the loading dock to the hoist and then to the eighth floor using a dolly. As they were coming down the ramp off the hoist, the dolly began to tip over and one of the pipes struck an employee's foot. The employee was hospitalized with a broken foot.",1
"An employee was setting up an extension ladder when the flank section of the ladder slid down and lacerated his left thumb, requiring hospitalization and surgery.",1
An employee was working on the tap hole of a furnace when hot air/steam released and burned the employee's face.,1
An employee was operating a powered industrial truck when his ankle was caught between the truck and racking in the warehouse. He fractured his fibula and ankle.,1
"An employee was on top of a structural beam, waiting for the crane to hoist the next beam into place, when the rigging failed. The beam then fell and struck the employee's left leg, partially amputating it below the knee.",1
"While carrying a tote of empty clothes hangers from the cash register area to the back stock room, an employee suffered two fractures to the pelvis, requiring hospitalization.",1
"An employee was disassembling a deck on the press when an unexpected signal was sent to the motor. The motor then started up while the employee's hand was in the point of operation. The employee suffered severe lacerations and broken bones in the right hand, requiring hospitalization.",1
An employee tripped on a pallet of supplies and broke her hip.,1
"An employee tripped and fell to the ground, fracturing the hip.",1
An employee was cleaning out a machine during the brick-making process when the machine's blade amputated his right thumb.,1
Employee's left pinky finger was amputated by the tailgate of a truck.,0
"An employee was clearing cartons off the ground when a stack of cases riding on a chain tipped over and struck his back, causing contusions.",1
"An employee tripped over a partially open cart washer and fell to the floor, fracturing the right hip.",1
"An employee was operating a forklift when his hand was pinned between the forklift's safety cage and a storage rack, amputating his left index and middle fingers.",0
A crew was installing a new powerline when an employee in a bucket truck came close to an energized line and suffered flash burns to the back.,1
"An employee's right arm was caught in a conveyor, tearing his bicep and requiring hospitalization.",1
"On or about 6/7/2016, at approximately 1425, an employee was working from a ladder to access a cable TV lock box when the ladder kicked out, causing the employee to fall. As he fell, he struck a stairway railing and injured his left wrist/hand and ribs.",1
"Employee was visually checking the compartments on top of a drop fuel trailer when he fell and struck the ground, breaking his left lower leg.",1
An employee was using internal line clamps to drive the internals of piping joints when his fingers were caught between two pipes. His right-hand ring and middle fingertips were amputated.,0
"An employee fell out of a golf cart and struck her head against the ground, suffering head trauma and loss of consciousness.",1
An employee was helping to fill an asphalt tar kettle when the line failed and the employee's face and arms were severely burned. The employee was hospitalized.,1
An employee was hospitalized and required surgery after slipping on a wet floor and breaking his hip.,1
An employee suffered a heat-related illness while moving dirt piles.,1
"While changing a roller on the power conveyor system, an employee's fingers were caught in the machine. The employee suffered two finger amputations. The system was still operating at the time of the incident.",1
An employee was handing materials to scaffold erectors when a metal grate was displaced. The employee fell approximately 10 feet and suffered a broken ankle.,1
"An employee was counting products when a forklift ran over his left foot, breaking toes.",1
"An employee slipped and fell on the wet floor while getting some cheese from a cooler, fracturing the left leg and scraping the right arm.",1
"An employee was unloading a container from a truck when the container struck and crushed his left toe, requiring surgery and hospitalization.",1
"An employee was cutting parts on the shear. After making several cuts, the employee pushed the last piece in position for the last cut. The back edge of the part came up off the table 
approximately 1/4"". As he was positioning the part, his left index fingertip went between the plate and the table. His coworker activated the foot pedal and the plungers came down to hold the part in place. When the part flattened out, his left index fingertip was pinched and smashed between the part and the table.",0
"An employee was conducting preventive maintenance on a conveyor motor when his left hand was caught between the gear box and gear box housing, amputating his left pinky fingertip and lacerating his left index finger. He was hospitalized. The motor was still running at the time of the incident.",1
"An employee was attempting to unjam auger blades on the top of a machine. When he dismounted the machine, he slipped and put his right hand out to catch his fall. He fell forward on his right hand and broke his wrist.",1
"An employee was on a ladder, trimming trees and bushes at a customer's residence, when the ladder slipped and fell over. The employee fell to the ground, suffering a back injury.",1
"An employee's hand was caught in calender rollers, requiring hospitalization.",1
An employee was using a high-pressure washer when the water stream cut his left foot. He was hospitalized with an injection wound.,1
"An employee and coworkers were working in the field. The employee was moving a hand line when the hose became twisted. As the employee kneeled to remove pressure in the valve, the pressure released and a piece of the valve struck him in the right eye.",1
"An employee was moving parts by hand when he tripped over a sliver of scrap metal, fell to the ground, and smashed his left middle finger. He was hospitalized.",1
"An employee was walking on a conveyor belt to fix a clog when his foot was caught in the chain. The chain pulled his left foot under a piece of metal, amputating it.",0
"An employee was moving a wall panel when his right pinky finger became stuck between the panel and the skip pan, amputating his fingertip.",1
"An employee was cleaning a wood floor and picking up wood by hand. He picked up a piece of plywood that was covering a shaft and then fell approximately 20 to 30 feet through the shaft, breaking his hip and eye socket.",1
"An employee was attempting to stop a whistling noise on a machine when his finger was caught in the point of operation, amputating his fingertip.",1
"An employee was helping to build a scaffold when he experienced light-headedness, cramping, pain, and nausea. He was hospitalized for a heat-related illness.",1
"An employee was cutting metal pipe on a band saw when the pipe or the band saw lacerated his hand, requiring hospitalization.",1
"On or about 6/8/2016, at approximately 1:15, an employee was placing a stencil inside a mold when a piece (known as a cradle) fell down from inside the top of the mold and struck/partially amputated the employee's left middle and ring fingers.",0
"An employee was on top of the rooftop to gather tools and move to a new work location. As he was walking near an open vent hole, he tripped and fell approximately 26.5 feet through the hole to the ground below. He suffered broken bones and neck/head injuries. Fall protection was not worn at the time of the incident.",1
"On June 8, 2016, at approximately 2:30 p.m., an employee was opening the door on the back of a delivery truck when another truck rolled backwards and pinned him between the two vehicles. He suffered broken vertebrae.",1
"On 6/8/16, an employee's right foot was caught on a turning strap on a patient's bed. She lost her balance and fell to the floor, fracturing her left hip.",1
"An employee was moving a door panel when the door panel fell off the horse, causing the employee to fall to the floor. The employee was hospitalized with a fractured right patella.",1
An employee was cutting vegetables with a knife when his left index fingertip was amputated at the fingernail.,0
"An employee was changing weld tips on a machine when the used weld tip fell. As the employee was trying to retrieve the used weld tip, the machine cycled and placed a door frame on the tip stand. The door cut the employee's left hand between the thumb and index finger.",1
"An employee was attempting to straighten a bent blade on a splitting saw when the saw was actuated, amputating the employee's right pinky and index fingertips.",0
"An employee was loading crates with household goods onto a truck when he felt light headed, numbness in his arm, sweating, panting, chest pain and then passed out. He was admitted to the hospital where he was diagnosed with heat stress.",1
"On or about June 8, 2016, an employee was chipping concrete inside a mixing drum using a pneumatic air chisel. The chisel malfunctioned, and the locking collar exploded, sending a piece of shrapnel into the employee's left bicep. The employee was hospitalized with a penetrative wound.",1
An employee was installing concrete blocks onto a modular home's concrete piers to level a double-wide trailer. A block fell onto his left middle finger and fractured it.,1
An employee's right-hand finger was crushed while he was loading cargo onto a loader.,1
An employee fell from a ladder and was hospitalized.,1
An employee was struck by a forklift and sustained a fractured ankle.,1
An employee was moving a platform when his thumb was pinched between the rolling platform and a stationary machine. His left thumb tip was amputated.,1
"An employee performing an accountability check was attacked and assaulted by a patient, suffering eye injuries and requiring surgery.",1
An employee was pushing a board through a shaper when the employee's hand slipped and went into the blade. The employee suffered an amputation of the right-hand middle finger to the first knuckle.,0
An employee injured his left thumb while he was sliding a reshore jack post into the closed position.,0
"On or about June 8, 2016, an employee was pulling a transmission part with a hoist when the employee's left index and middle fingers were crushed between the plate and the transmission.",1
"An employee felt light-headed, fainted, and fell to the ground while walking to the office, suffering a broken ankle.",1
"An employee was dismantling a mobile tugger. As he was pulling back on the motor, the pulley was caught on the bottom track of the wall and came out of the extension arms, causing the weight to shift toward the motor side. The motor began to counterbalance toward the employee. He then tried to prevent the equipment from flipping up by catching the weight of the motor. At that time, he injured his back and fell to the floor. He was hospitalized.",1
"On or about June 08, 2016, an employee was backing up a standup forklift when he collided with a parked standup forklift. He lacerated his foot/ankle and fractured an ankle bone.",1
"On June 8, 2016, at approximately 11:00 a.m., an employee sustained an electric shock while he was repairing an overhead garage door operator.  He then fell from the third rung of an 8-foot ladder, fracturing his vertebra and requiring overnight hospitalization.",1
"An employee was standing on an A-frame ladder while attempting to open a cover plate from a tea line. The tea product poured onto the employee, causing him to slip and fall off the ladder. He struck his head on the concrete floor, suffering contusions and an edema.",1
An employee was power-washing the airfield surface when the water spray or the sharp edge of the spray nozzle lacerated his upper left arm. He was hospitalized.,1
An employee was dumping a container when his hand/finger was struck by a cable from a truck winch.,1
"An employee turned on a core drilling machine. The machine was stuck, resulting in him being knocked to the ground. The drill base kept spinning and went over his hand, amputating his left ring fingertip.",1
"An employee was sweeping up leftover chips when a nearby distributor truck began to back up and hit the employee. The employee was dragged under the truck, cracking three vertebrae and two ribs.",1
An employee burned the left hand on a pressing machine.,1
"A firework unexpectedly went off in an employee's hand, amputating the first two fingers to the first digit and lacerating the thumb and ring fingers.",1
An employee was handing a coworker pieces of wood after cutting them with a chop saw when the saw activated and partially amputated his right thumb.,0
"An employee was struck by an order picker and was caught between rack shelving and the picker, breaking ribs and suffering internal injuries. He was hospitalized.",1
"An employee was attempting to unravel a bound chain. When the slack released, his left middle finger was caught between two pieces of steel, amputating his fingertip.",0
"An employee was adjusting a chute on the back of a cement truck when the employee's right-hand finger was pinched by the chute, scraping off finger skin.",1
"An employee was using a chop saw to cut aluminum. He stopped cutting the metal and turned the chop saw off. The chop saw had some revolutions left. The employee tripped and fell, and the back of his left knee struck the blade, lacerating it. He was hospitalized and required surgery.",1
An employee was attempting to boost a patient up in bed when she suffered severe back pain.,1
"An employee was preparing material to add to a batch on a mixer. A plastic bag became tangled in a mixer shaft, and the employee's arm also became wrapped around the shaft. The employee suffered a compound fracture to the left arm.",1
An employee was positioning a pallet load on the forks of a reach truck when a coworker backed his reach truck into the employee's reach truck. The reach truck's outrigger ran over his left foot.,1
"An employee was using pipe wrench to install a pump in a liquid storage tank when the wrench broke free and caught the employee's right pinky finger, partially amputating it.",0
"While stepping off a ladder, an employee missed the last rung and lost his balance. He fell to the ground and landed on the left side of his body. He was hospitalized with a fractured hip.",1
"On 6/9/16, a maintenance employee was troubleshooting an overhead door when his right index finger was caught in a sprocket, partially amputating the right index finger tip.",0
"An employee was installing a light fixture from a ladder when he received an electrical shock and fell to the ground, suffering broken teeth and a fractured right patella.",1
"An employee was performing walking cuts on the kill floor. As he attempted to make a cut, he missed and contacted the knife of a coworker, lacerating his right forearm.",1
"An employee was using hand tools to unload a spring that was incorporated into the structure of the building. Upon compressing the spring, it released and the bracket that housed it struck the employee, fracturing his right wrist.",1
"An employee was moving a beam with an overhead crane when the beam fell on his right leg, breaking it. He was hospitalized.",1
"An employee was struck by a forklift truck that was traveling in reverse, fracturing his left foot.",1
"An employee was replacing some bolts in the ""truck dump"" machine when his right hand was caught between a chain and sprocket, amputating his index and middle fingers and fracturing his thumb.",0
An employee was inside of his car in the parking lot when he started cramping all over his body. He was hospitalized for dehydration.,1
"An employee was repositioning a piece of cardboard over the vacuum holes of a printing press when the piece was drawn into the machine. His left hand was also pulled in, de-gloving the top of the hand and amputating the index finger.",1
An employee was mowing a retention area when the mower rolled over on the employee. The employee was hospitalized with a head injury.,1
"An employee was shoveling gravel into a 1-foot trench by a partition wall. The site supervisor was operating a mini excavator near the partition wall while the employee was working on the opposite side. The mini excavator bumped into the wall, causing it to fall to pieces. Some of the pieces fell on and broke the employee's hip.",1
"On June 9, 2016, an employee was directed to connect a hose to a fire hydrant. The hydrant was charged. When the employee opened it, the employee was struck by high-pressure water and/or tools. The employee suffered a fractured pelvis and broken rib(s).",1
"While an employee was attempting to stick or unstick something in the dough press machine, the press operator started the machine, amputating the end of the employee's right thumb.",0
"An employee was operating a powered pallet jack when he tripped over a pallet and fell. The pallet jack traveled up his left leg, lacerating and possibly fracturing it near the ankle.",1
An employee was loading a truck's flatbed trailer when he stepped on a piece of flat bar that flexed and fell 6 feet to the ground below. He fractured his left elbow.,1
"While operating a sorter, an employee attempted to clear a board that was hung up on the back side of the sorter. The board slipped and pinched the employee's right index finger, amputating the fingertip.",0
"An employee was delivering a 265-liter (70-gallon) compressed air tank when the delivery cart caster wheels struck the skid plate, turned sideways, and caused the tank to topple over and strike the employee. The employee suffered a fractured back and was hospitalized.",1
"An employee was ascending a ladder with a work light to access the roof when he fell off and struck the ground, suffering head, nose, and ear injuries, as well as loss of consciousness.",1
"A stack of insulation rolls fell on top of an employee while he was walking in the warehouse, fracturing his right leg and requiring surgery.",1
"On or about June 09, 2016, an employee was jacking a truck up when the jack slipped and hit the employee in the torso. The employee was hospitalized with a ribcage injury.",1
An employee was opening a box of office supplies when she tripped and fractured her lower back.,1
"An employee was entering a laboratory at a customer's location to deliver drinking water when a gust of wind and the pressurization of the laboratory caused the door to close on the employee's right pinky finger, amputating the fingertip.",0
"An employee was in a boom lift, replacing an emergency light at a warehouse. As he was lowering himself, the bucket swung into an industrial ceiling fan, which lacerated his left forearm. He was hospitalized.",1
"An employee was struck by a vehicle while picking up a traffic control flag from the middle of the street, suffering multiple bodily injuries.",1
"An employee was loading a trailer when he fell off the back and hit the concrete below, suffering a concussion and broken ribs.",1
An employee was delivering mail on his walking route when he became lightheaded and dizzy. The temperature at the time was 91 degrees with a humidity of 41%. He was hospitalized with heat stress.,1
"While replacing switch components on a high-voltage contactor, an employee was shocked and required hospitalization.",1
An employee was removing tin from a beam that was located on the roof when he fell and injured his back.,1
An employee was sprayed in the face with general purpose cleaner as he was mixing the chemicals. He suffered an allergic reaction to the medication he was given.,1
"An employee was setting up the dies on a punch press when it released energy unexpectedly. The press caught and severely lacerated his left hand, with a possible amputation. The press was not powered off at the time of the incident.",1
"An employee was observing a third party who had a device with a spool line. The employee's left hand was caught by the line, amputating the ring finger.",0
"While moving a gondola, an employee's fingertip was pinched and amputated in the gondola grate.",0
"While loading luggage into a can and dolly, an employee's hand became caught in a pinch point, partially amputating the middle finger.",0
An employee was cutting decking with a handheld saw when the saw cut his leg.,1
"An employee was picking up a stack of boards behind the chamfer machine when the machine malfunctioned, causing the sawblades to throw the boards. The boards slammed onto the employee's left middle finger, amputating the fingertip.",0
"An employee was reinstalling a cutting shoe on a direct push tube soil sampling rod. The dual tube rod slid out of the tensioner that was being used to hold it up and fell back down the bore hole, amputating the employee's right index finger below the first knuckle.",0
"On or about June 10, 2016, an employee sustained finger injuries when the employee's hand was caught in the shear hold-down.",1
"An employee was attempting to do maintenance on a wood chipper when his hand was trapped in the conveyor. All five fingers on his right hand were lacerated, and he was hospitalized.",1
"An employee slipped and fell to the concrete floor while discarding trash in an outside dumpster, suffering a broken femur.",1
An employee was hot wrapping a pipe using flammable glue and a flame torch. The mixture ignited and the employee suffered second degree burns.,1
An employee was climbing into the cab of a tractor-trailer when the muscle in his calf detached from the bone.,1
"An employee took packages off a conveyor, stepped back, and fell, severely fracturing the ankle.",1
"An employee was opening a refrigerator when it fell on her, injuring her ankle and requiring surgery.",1
"An employee was working on the side of a wall, positioning ties. As he was climbing the wall form, he fell from a height of approximately 4 to 5 feet, breaking his left ankle.",1
"An employee's right hand was on the mezzanine near the catwalk when a coworker adjusted the catwalk, causing it to move and set down on the employee's right middle fingertip. When the employee attempted to remove his hand, his middle fingertip was partially amputated.",0
An employee was bending metal when their right hand pinky finger was caught between metal rollers and amputated.,1
An employee was working on a presorting machine. She was pushing a stack of mail trays across the floor when the trays fell over. She fell over with the trays and fractured her leg.,1
"The injured worker was driving a golf cart toward the body shop. Another employee was driving a customer's vehicle and they collided. The injured employee suffered a broken right arm, a fractured shoulder and a fractured to the mid foot.",1
"An employee was replacing an old lightning arrester with a new one. The new arrestor began to move, so the employee reached over to stop it. The employee's left elbow then came into contact with an energized line, causing an electrical shock.",1
"On 6/10/16, an employee fell onto a wooden stake in the ground and punctured his lungs. He was hospitalized.",1
An employee was hospitalized for heat exhaustion.,1
"An employee was operating a walk-behind lift jack in a back stockroom. The employee's gloves became caught in the controls, causing the lift jack to become stuck in the on position. The employee was pinned between two lift jacks and suffered a leg injury.",1
"The employee was pushing boxes down the conveyor line when a box got stuck on the line. As the employee tried to release it from where it was caught, her finger became caught in the chain on the conveyor line resulting in a partial amputation of the fourth finger on her left hand.",1
"On June 11, 2016, an employee was assisting the crew as it rigged out a crane. The crane operator was retracting the outrigger when the injured employee used his left hand to brace himself as he bent down to pick up the outrigger pad. He placed his left hand on the outrigger, and his finger entered the eyelets on the outrigger. As the outer section of the outrigger retracted into the inner section, the eyelet on the outer section amputated the employee's left middle fingertip.",0
"An employee was involved in a physical altercation with a coworker, suffering a fractured vertebra.",1
"An employee's foot became stuck on a floor tile, and she fell and broke her hip.",1
"While climbing up a ladder to hook into a beam strap and yo-yo, an employee fell approximately 4 feet from the ladder and broke 8 or 9 ribs.",1
An employee was tightening a loose tarp over the load of a dump truck when he fell and suffered head trauma.,1
"An employee was taking electric breakers and wires out of a live electrical panel. One of the stingers from a bus bar dropped down after breaking a set screw, causing a cross phase and starting an arc flash. The employee fell to the ground and suffered burns to the eyes, face, and left forearm.",1
"An employee had been installing electrical wiring and was descending a ladder when the ladder collapsed. The employee fell and contacted the floor, suffering a contusion and bruised tailbone.",1
An employee was helping a patient walk from the bed to the bathroom when the patient's leg gave way and both fell to the floor. The employee suffered a fracture.,1
"An employee was unloading a trailer when freight fell on the employee, who suffered a broken hip.",1
"An employee was performing maintenance on an electric breaker panel when an arc flash occurred, burning his face, arms, and hands.",1
"Two employees fell from scaffolding after it collapsed inside a water tower, striking the concrete floor. One was hospitalized with a broken arm.",1
"An employee was dismantling a crate that was housing a small boiler unit. While his right hand was between the boiler and a board of the crate, the board kicked another part of the crate. The force of the kick caused the board to move and amputate his left ring finger between the board and the boiler.",0
"An employee diagnosed that a serpentine belt was defective on a car. After replacing the belt, the employee attempted to locate the source of a noise. His glove was caught between the shroud and the crank, and his left-hand fingers were crushed.",1
An employee was working at the drive through window collapsed due to heat stroke.,1
"An employee was exiting the patient compartment of an ambulance when her ring caught on a thumbscrew on the railing. Skin was torn from her ring finger, requiring surgery.",1
An employee was stocking shelves in the back room when she tripped over a box and injured her right knee. She was hospitalized.,1
"An employee was walking in a hallway when she tripped, injuring her right knee. She was hospitalized.",1
An employee was performing preventative maintenance on a drive motor that operates a conveyor belt when his right hand was caught by the belt. He broke his hand and lost several fingertips. The belt was unguarded at the time of the incident.,1
An employee was moving a free rolling blanket cart when he stopped and grabbed his chest. He sat down on the blanket cart and complained about chest pain. Temperature in the area ranged from 90 to 100 degrees. The employee was admitted to the hospital.,1
"An employee and a coworker were carrying part of a rack. While the two were putting down the  part, it fell on the employee's right big toe, lacerating and fracturing it.",1
"An employee was removing burrs on a set of custom-made aluminum jaws with a 10-inch hand file, when the file struck the jaws while they were still spinning in the chuck of the lathe. The file then pushed back into the employee's left-hand palm, causing a deep puncture wound.",1
The employee removed the safety gate of the inserter machine and got in front of the machine to clean the paper out. The machine started to move and the employee was pinned between the pockets of the machine and the crossbar resulting in multiple fractures.,1
"On 6/13/2016, at 1:30 a.m., an employee was cleaning a ventilation hood when his foot was caught in the lower rung of a ladder he was descending. He fell approximately 6 to 8 feet, fracturing the 2nd and 3rd metatarsals in his foot and requiring surgery.",1
An employee was outside collecting trash on his route and suffered heat exhaustion.,1
"An employee was un-belting and descending a 15-foot ladder. The ladder slipped and started falling, so the employee jumped from the ladder and landed on his feet. He fractured both heels and broke his left ankle, requiring hospitalization.",1
An employee working in the laundry department inhaled laundry cleaner vapors while transferring residual chemicals from one container to another. The employee was hospitalized overnight.,1
"An employee was working under an overhead crane that had just placed two-500 lb. steel poles on a table. The employee moved in to begin cleaning the poles when the rigging fell from the crane hook and struck his left hand, amputating all four fingers.",1
An employee was performing maintenance repair on a machine when the operator started it. The employee's left arm sustained a compound fracture and elbow dislocation. The machine was not locked out at the time of the incident.,1
"While throwing brush off a truck and down an embankment, an employee lost his balance and fell 75 feet down the embankment. He broke ribs, lacerated his spleen, and fractured his spine.",1
"An employee was descending a ladder when he fell from the second rung closest to the ground, suffering a head injury.",1
"At approximately 2:30 p.m., an employee was lashing and unlashing cargo when he became overheated and disoriented. He was hospitalized with heat exhaustion.",1
"An employee was attempting to straighten a piece of metal in a press brake when his right hand was caught in the machine, amputating his index and middle fingertips.",1
"An employee was installing a large lift cylinder on a bulldozer. While he was trying to align the cylinder, it slipped, crushing his left ring finger under the pry bar he was using to position the cylinder. He was hospitalized overnight and required surgery.",1
"On 6/13/16, an employee was packing ceramic parts onto a pallet when he tripped over another pallet on the floor. He sustained lacerations on the back of both arms and was hospitalized.",1
"An employee was using a band saw to cut angle iron. One of the five pieces of angle iron that was being cut was shorter than the others and was not secured by the clamp. When the band saw was lowered to make the cut, the unsecured angle iron was pulled into the backstop, or guide, and the employee's left thumb was caught between the angle iron and the backstop resulting in amputation.",1
"An employee was working from a 19-foot electronic scissor lift (set at 11-feet high) to cut a large structural brace using a torch. As the brace was cut loose, it struck the top of the scissor lift and fell onto plastic storage containers. The back of the employee's head hit the scissor lift guardrails and was lacerated, requiring hospitalization.",1
"On June 13, 2016, an employee was working on a barge (on land), performing paint spraying operations. The employee attempted to clean out a paint gun when a small foreign object embedded into the fourth digit of his right hand. He was hospitalized and required surgery.",1
"An employee was unloading a delivery truck when the load shifted. Some of the product fell down, landed on him, and broke his left leg.",1
"An employee was adjusting the position of a paper-roll stand when a nearby hoist came close to the roll stand and caught the employee's right hand, fracturing/lacerating a finger.",1
An employee was operating a punch press when the die came down on his left thumb and amputated the tip.,0
An employee began vomiting after performing die-casting on a machine. He was hospitalized with severe dehydration.,1
An employee was hospitalized due to heat stroke that occurred while he was working in the field harvesting watermelons.,1
"An employee was loading a truck of cement when the loading process clogged. When the employee attempted to clear the clog, a large amount of cement dumped onto him, causing respiratory distress. He was hospitalized.",1
"On June 13, 2016, an employee was attempting to remove meat from the discharge door of a blender when the blender paddles caught and amputated the employee's left middle finger.",0
"An employee was clearing out a dryer due to a buildup of pasta between the press and dryer when a coworker turned on the machine to blow the line free of pasta. The employee suffered amputations of the second, third, and fourth fingers below the knuckle, as well as a pinky finger amputation above the knuckle.",1
"An employee was threading up a paper machine when his hand was caught and pinched by a hydraulic cylinder, lacerating his third, fourth, and fifth fingers and fracturing his fourth and fifth fingers.",1
"An employee was helping a driver deliver produce. As he placed the dock leveler while standing on the back of the door, he injured his left foot with the leveler.  The employee then attempted to remove the dock leveler with his right hand when it fell on his right index finger and amputated the fingertip.",1
An employee was checking the drive bracket on a conveyor when the conveyor activated. His left thumb tip was caught and amputated in the conveyor chain. The conveyor was unguarded and not locked out at the time of the incident.,0
"A crew was pulling tubing out of a hole. As elevators were coming down, an employee grabbed the tubing elevators by the handles and was unable to push them back far enough to latch them onto tubing. The elevators hit the top of the tubing collar, causing it to shift and pinch his right index finger between the elevators and tubing bail. His finger was lacerated and fractured.",1
"An employee was dismounting off the back of a truck when his wedding ring was caught, causing the ring to embed into his finger.",1
"An employee went outside to fill a bailer with trash and became locked out of the building. As he was climbing over a gate to access another door, he fell to the ground and broke his right kneecap.",1
"An employee was helping to load a food truck on the dock when the driver drove off while the employee was still in the truck, causing the employee to fall and break a leg bone.  The employee was hospitalized overnight and required surgery.",1
An employee experienced heat stress while picking up the trash.,1
"An employee was stepping off a pallet jack to pick a product from the shelf when his right foot was caught between the pallet jack and the upright rack, breaking his right ankle. He was hospitalized and had surgery.",1
"An employee was descending some stairs from a platform when he lost his footing, put his arms out to break his fall, and caught his pinky fingers on both hands in the ""V"" formed by the railing. Both pinky fingers were amputated.",0
An employee was assembling an amusement park ride when the component that was being installed fell and crushed his arm. He was hospitalized overnight with a fractured left forearm.,1
"An employee was moving drywall from the forks of a fork truck when the drywall slid off the forks and pinned him between the drywall and a wall, causing back and neck injuries that required hospitalization.",1
"An employee was delivering auto parts. When he exited his vehicle, it rolled and ran him over. He was caught under the vehicle's wheel well and broke his collarbone.",1
"An employee tripped and fell over a basket on the floor, fracturing her hip.",1
An employee's right index finger was amputated in the pinch point on a drive tire while the employee was performing maintenance on a lift truck.,0
An employee was using a circular saw to cut wood when the saw jumped and amputated two of the employee's fingers.,0
"An employee was stung by a wasp while inspecting scaffolding and had an allergic reaction, requiring hospitalization.",1
"An employee was powering up a compressor and noticed a leaky hose. When he turned around, the hose popped off and sprayed him in the back, causing second and third degree burns.",1
"While getting out of his truck, an employee misstepped and re-injured a previous hernia in his left lower abdomen.",1
An employee was delivering packages on his route when he began to feel nauseous and experienced cramping due to heat stress.,1
"An employee was clearing an area when a large metal rack used to store aluminum dropped on his foot, fracturing it.",1
"While installing underground utilities, an employee began to feel sick. The employee was hospitalized for heat-related illness.",1
An employee had finished repairing a strobe light on the back of a forklift and began to climb down when he fell to the concrete. He fractured his right hip socket and required surgery.,1
"An employee was operating a powered industrial truck (double pallet front rider) when the truck struck a section of storage racking, fracturing the right lower tibia and mid shin.",1
"An employee and a coworker were applying stucco from a scaffold to the exterior of a building. When the employee and his coworker stepped off the scaffold onto a canopy awning, the canopy came off, causing them to fall. The employee suffered a broken left ankle and tailbone, requiring hospitalization.",1
An employee's right thumb was bitten by a snake while the employee was removing shrink wrap from a skid inside the building.,1
"An employee was walking on the sidewalk when she tripped on the raised lip of the concrete. She fell on her gun belt and felt back pain, suffering a back contusion.",1
An employee was waiting in the parking lot to swap packages with another driver when he became ill. He was hospitalized with a heat-related illness.,1
An employee was holding a piece of foam in place to cut using a band saw when the saw blade amputated the employee's right ring finger.,0
"An employee was using a ladder on a tile floor with plastic sheeting when the ladder slipped out, causing the employee to fall and break their pelvis.",1
An employee was hitting a refractory block that had wedged between a wall and a floor with a sledge hammer when another refractory block fell and struck him. Each block weighs over 200 pounds. The employee's right shoulder was injured. The employee also suffered second degree burns and was hospitalized.,1
An employee was hospitalized after completing a delivery route due to dehydration.,1
An employee was operating an automatic panel saw when his right thumb pad was avulsed between the gate/guard and the equipment. He required surgery and hospitalization.,1
An employee was injured when boxes fell on him.,1
An employee was using a circular saw to cut plywood when the blade lacerated the employee's left-hand fingers.,1
"An employee was installing a new blade on a lathe when he stumbled and his right wrist made contact with the blade edge, resulting in a severe laceration.",1
"An employee was operating a CNC mill that was equipped with a 1"" drill bit and checking the large bore depth of the hole when the left index finger was crushed by the drill bit that came down automatically.",1
"An employee was helping a crew to remove some malfunctioning valves from a ballast tank on a ship for repairs. While rigging gear was lifting the valve to the next level in the ladder way, the employee was helping to guide the valve up the ladder and was keeping the valve from striking the steps. When the valve reached the top step, the employee helped lift it over the lip of the ladder way. He then lost his balance and fell forward a little, inadvertently shifting his hold on the valve, which placed his fingers along the surface of the valve opening. At this same moment ,the valve came in contact with the deck, causing the spring to dislodge from the stuck position and to close on two of his left-hand fingers. He was wearing leather work gloves that lodged in the pinch point along with his two fingers. As his coworkers tried to open the valve, he pulled his hand out of the glove, which was still lodged in the pinch point. He amputated his left middle and ring fingertips at the knuckle closest to the fingernail.",0
"While transporting mail, an employee was struck by a hamper and fell over, breaking her arm and dislocating her elbow.",1
An employee's leg was punctured by the nail from a nail gun the employee was using to hang fascia.,1
"On June 14, 2016, an employee was felling trees and brush around an overhead power transmission line with a chainsaw. The oak tree being felled slit up the middle and toppled to the ground, striking the employee's shoulder and knocking the employee to the ground. The employee was hospitalized with fractured collarbones and ribs.",1
"An employee was servicing a customer's compactor that was inside a large cinder block enclosure with two access gates. As he was closing the left gate, a gust of wind quickly blew the gate closed, pinching his thumb where the gates meet in the middle. He suffered a partial finger amputation.",1
"An employee was repairing a hot condensate steam-line joint when the steam pipe broke and hot condensate steam splashed onto and burned his left thigh, right thigh, and right forearm.",1
An employee was emptying a box of scrap plastic onto a sorting table and suffered a broken little finger when trying to prevent plastic from sliding off the table.,1
An employee was hospitalized after falling down the stairs.,1
"On June 14, 2016, an employee was bitten by a tick while performing remediation work in the field. The employee became ill and required hospitalization.",1
An employee got a splinter in his finger that later became infected. The finger was amputated as a result.,0
An employee was carrying either a box of chicken wings or a keg that dropped onto their foot. Part of the foot/toes were amputated.,0
An employee was pouring molten iron back into the furnace when the molten iron splashed onto the employee's foot resulting in burns to the foot.,1
An employee fell from a three-step ladder while performing a maintenance function at an aircraft. The employee suffered a head injury and was hospitalized.,1
"An employee was closing the overhead door on a trailer while standing on a dock. The door started going back up and the employee reached out with his right hand to stop and pull it back down. His right index finger was caught between two panels, amputating his fingertip.",1
"On June 15, 2016, an employee was troubleshooting the chain on a forklift mast. With one hand on the lever and the other hand near the chain, the employee operated the lever. His left hand was caught in the chain, amputating his second and third digits.",0
"An employee was unhooking a cart from a tug that contained three carts. The tug operator put the tug in reverse, pinning the employee between two carts. The employee suffered a collapsed lung, broken clavicle, and broken rib.",1
"An employee had been doing landscaping outside and was walking when his right foot slipped forward, causing his left leg to buckle under him. He fell to the ground and landed on his left leg, breaking the fibula and tibia and requiring surgery.",1
" An employee tripped over an electrical cord and fell, requiring hospitalization.",1
An employee had lifted a vehicle 4 inches off the ground to make sure it was sitting on the pinch rail. The vehicle slipped off the cleat and pinched his right middle finger between the vehicle and the lift. He suffered a phalangeal amputation of his right middle finger.,0
"An employee was notch-cutting a tree when a tree limb fell on him. The tree limb struck his hardhat, lacerated his forehead, and knocked out his teeth. He was hospitalized.",1
An employee experienced heat cramps and dehydration while stacking materials.,1
"An employee was running a string of pipe from a derrick basket when his shirt was caught by the rotating torque rod. It pulled his shirt tight, compressing his chest against the derrick basket. He suffered chest bruising and lost consciousness, requiring hospitalization.",1
"An employee was walking from the bakery to the sales floor. There was a transition in the floor that went from slip-resistant flooring to concrete. When the employee stepped from the slip-resistant floor to the concrete, she slipped and fell, breaking her arm and hip.",1
An employee who had been using a weed wacker suffered heat exhaustion and was hospitalized.,1
An employee was observing the pallet machine and attempted to access the platform to adjust the limit switch sensor. The employee then fell and suffered an avulsion fracture to the left leg.,1
"An employee was removing tables from a truck when the pile of tables collapsed on the employee, breaking the left femur and requiring hospitalization.",1
"On 6/15/16, an employee was removing chicken feet from a shackle machine when his left thumb tip was amputated.",1
"On June 15, 2016, an employee was inspecting a refrigeration compressor outside and began to feel unwell. He was hospitalized with heat stress.",1
"An employee tripped over a hose and fell on top of a cart full of industrial supplies, puncturing his left lung and requiring hospitalization.",1
An employee fell while climbing down from a truck.,1
"While descending a ladder on a loader, an employee fell and struck the ground, suffering a head laceration.",1
"On June 15, 2016 at 6 p.m., an employee was swapping out a piece of a machine when the hoist jerked while the employee was holding onto the piece, ramming him into the machine. He suffered a lung injury and was hospitalized.",1
An employee suffered heat exhaustion while conducting plumbing activities.,1
"An employee was using a tool to clean equipment when the tool snapped back and caught his left ring finger, amputating the fingertip.",1
"After performing HVAC repairs and installation, an employee suffered cramps and vomiting. He was hospitalized for severe dehydration.",1
"On or about June 15, 2016, an employee was moving a nylon board to the assembly table and in the processed pinched her left index finger resulting in a partial amputation.",0
An employee was unloading/hoisting structural steel members/composite joists from a flatbed trailer truck when the load shifted. The employee dismounted from the truck and landed on a bucket of bolts on the ground. He rolled and broke his ankle.,1
"An employee working in the deli slipped in mop water and fell, suffering a broken pelvis and elbow, as well as internal injuries.",1
"An employee was discovered non-responsive in a supply room adjacent to the wash bay.  The employee may have tripped over a hose and fell to the ground, hitting his head. He was hospitalized.",1
"An employee's fingertip was caught between a metal chain and a peg from a lugger box, resulting in an amputation.",0
"While walking up a flight of stairs, an employee lost balance or tripped on the third step and fell backwards, landing at the bottom and breaking the left leg and hip.",1
An employee was operating a pneumatic hand drill when the drill bit caught the employee's left gloved hand and amputated the left index fingertip.,0
"An employee fell approximately 7 feet from a platform to the concrete floor, suffering head, neck, and torso injuries. The platform was unguarded at the time of the incident.",1
An employee became ill after working inside a new construction building for part of the day and also outside part of the day. He was hospitalized that evening for heat stroke.,1
An employee was stepping up to access his work station at the trim saw when his left foot slipped/skidded and he fell into the running trim saw blade. His lower left arm was amputated and required reattachment surgery.,1
An employee tripped and fell while walking back from a meeting. She was hospitalized with a broken left hip.,1
"On June 15, 2016, at 0945, an employee contacted high voltage while replacing a switchgear, suffering second and third degree burns to the hand.",1
"An employee fell to the ground while descending a ladder, breaking a leg and injuring an arm.",1
An employee was cutting down a tree and was shocked by a power line.,1
"On 06/15/2016, an employee was helping to relocate the forks on a powered industrial truck. The employee's left-hand ring finger was caught between the forks, resulting in an open fracture and partial amputation of the fingertip below the fingernail.",0
An employee was moving a switch gear into place when it fell on him. He was hospitalized with a head gash and broken ribs.,1
An employee was helping to lift a refuse bag into a truck when the bag's contents ripped through the bag and lacerated/amputated the employee's right index finger. The employee was wearing cotton gloves at the time.,0
An employee was rigging equipment on a flatbed when he tripped over a timber and fell 4 to 4.5 feet to the ground and fractured his right hip. He was hospitalized.,1
"An employee was removing excess yarn from a yarn package (a roll of yarn) inside a cabling machine. He held the excess yarn in his right hand, and as he put it back into the machine, the yarn became caught on the pre-seed roller. The roller then pulled the yarn around and partially amputated his fifth digit (pinky finger).",0
"An employee was feeding/reloading the shrink wrap machine when he noticed that there was a paper jam. When he attempted to unjam the machine, the heating element and cutter caused third-degree burns to the back side of his right hand and fingers.",1
"While cutting plywood with a table saw, an employee suffered a partial amputation to the fifth (pinky finger) and fourth (ring finger) digits and a severe laceration to the third digit (middle finger) on his right hand.",0
An employee was overcome by heat-related illness while performing maintenance on the pump houses for the swimming pools.,1
"An employee was in a drainage ditch, digging and preparing the area for concrete work, when a driver lost control of his car on the highway, drove across two lanes, across the frontage road, and into the drainage ditch. The car hit the employee, who was hospitalized with a fractured pelvis, fractured ribs, and knee injury.",1
"On June 16, 2016, an employee was hospitalized after a case of 12 soda cans fell and struck the back of the employee's neck.",1
"An employee was checking piece numbers on structural steel beams that were stacked one on top of another when a piece of cribbing broke and collapsed the stack of beams. The employee could not get out of the way fast enough and the collapsing steel fell on his leg, pinning it under the beams. He was hospitalized with a broken/fractured right leg.",1
"An employee was driving an off-road vehicle at a jobsite when the vehicle rolled, breaking the employee's leg. He was hospitalized.",1
"On 6/16/16, an employee lost his footing inside of a cardboard trailer and fell to the concrete ground. He broke his left tibia and was hospitalized.",1
An employee was installing a satellite dish on the roof of a customer's house when he began to experience cramping. He was hospitalized with heat exhaustion.,1
"On June 16, 2016, an employee was attempting to enter a tractor-trailer rig when he fell backwards to the ground, fracturing ribs and vertebrae. He was hospitalized.",1
An employee was taking mail from a tray and putting it onto a conveyor belt. The temperature was approximately 79 degrees. She began hyperventilating and required overnight hospitalization for possible heat exhaustion.,1
An employee was riding to a mail delivery point when the employee began to suffer from heat illness.,1
"While attempting to clear up material that was bunching up in a rewinder machine, an employee's finger was amputated in an ingoing nip point.",0
An employee was walking when she tripped and fell to the concrete floor. She landed on her right side and broke her right hip.,1
An employee was hospitalized after suffering from heat exhaustion.,1
"While testing a circuit card in a thermal test chamber, an employee attempted to adjust the fiber optic cable connection and received an electric shock.",1
An employee suffered heat exhaustion while delivering mail.,1
An employee's right middle finger was caught and partially amputated in a pinch point while positioning an h-pile.,0
"An employee was disconnecting the existing power source to the cardboard balers when the employee received an electric shock, requiring hospitalization.",1
An employee was hospitalized for heat exhaustion and dehydration.,1
"An employee was repairing a large tractor-trailer. The hood latch of the vehicle failed, causing the hood to fall onto the employee and push him to the ground. He broke his right hip and was hospitalized.",1
"An employee was gathering tools to clean the screw barrel part of the molding machine when something fell on top of the employee's left-foot, big toe. The employee was hospitalized and had surgery.",1
"While operating a printing machine, an employee attempted to clear a paper jam. This employee's pinky finger was crushed by the machine's elevator, requiring surgery.",1
"On or about June 16, 2016, at 7:20 a.m., an employee was moving sheets of paper when the paper shifted, aggravating the employee's pre-existing back trouble. The employee was hospitalized with back strain and lower back muscle spasms.",1
"An employee was fabricating a metal guard when the guard shifted. His left-hand middle finger was caught between the metal guard and a stationary object, amputating the fingertip.",0
An employee suffered from dehydration and was hospitalized.,1
"An employee and a coworker were pulling packing from a pump using a plunger. The coworker used the plunger while the employee had his hand in to pull the packing. The employee's hand was caught between the tool and the packing, amputating the right middle finger.",0
"An employee was preparing to transfer material with a forklift when he lost control of the forklift and crashed into a wall, crushing his foot between the wall and the forklift. He suffered multiple left-foot fractures.",1
"An employee was unlocking equipment for maintenance when he experienced dizziness, nausea, and vomiting. He was hospitalized due to heat-related illness.",1
"An employee was helping to rig a spanner beam to a form so the gantry crane could lift it. One side of the beam was unshackled. The crane operator reeled in the crane, and the un-shackled side of the spanner beam became dislodged from the form's lifting lug. The beam then flipped off the form and fell on the nearby employee's foot and ankle, breaking them.",1
An employee was seriously injured when he was struck by a pressure cap while performing an air pressure test on a 20-inch pipe.,1
An employee was closing a gate when her left thumb was caught and amputated between the gate and the frame.,1
An employee was getting a crash attenuator truck set up at a road construction job site when the employee's fingers were caught between a support cable and a support structure. The employee suffered a finger amputation and broken finger.,0
"A door hinge closed on an employee's left ring finger, amputating the fingertip to the first knuckle.",0
"An employee was conducting land surveying on a private exotic wild game farm when an elk attacked the employee, causing serious injuries.",1
An employee was delivering a package to a residence. She held the package over a wrought iron gate with her right hand then stuck her left arm through the bars of the gate to lower the package to the ground. The gate opened electronically and the employee's upper left arm was caught and fractured in the gate.,1
"An employee was boring using an industrial auger when the auger locked up, pinning him against the bank. He suffered a fractured right leg and internal injuries.",1
"An employee was operating a stand-up forklift (order picker) to take a 40-pound roll to the wrapping machine. She loaded the roll on top of the front edge of the order picker, above the operator department and behind the mast of the order picker. As she was going forward, she came to a stop and the roll fell, striking her hand and the control panel. This caused the order picker to go in the reverse mode. The employee quickly exited the order picker, and the back wheels ran over her foot, resulting in an amputation.",1
"An employee was working on the heart filler machine. The liner was out of adjustment, so the employee attempted to readjust it. The gate then closed on her finger, amputating her right index fingertip.",0
"An employee was pressure-washing a flat roof with an existing membrane for repairs. The roof had a parapet wall of 25 to 28 inches all around the perimeter. The employee hit the wall and fell over onto the grass below, suffering a broken ankle and requiring surgery. The building was a 2-story condominium.",1
"An employee was carrying a mirror to the dumpster when it broke and cut his left wrist, requiring hospitalization.",1
"An employee was descending a ladder when he missed the last step. He grabbed onto the ladder of the injured employee, who was working next to him, knocking him off. The injured employee suffered a collapsed lung and cracked ribs.",1
"An employee was walking down a flight of stairs and stepped wrong, resulting in a broken ankle.",1
"A maintenance employee had just replaced the ""tilt arm"" on a bird filter machine, following lockout/tag-out procedures. The employee then removed the locks and inspected the filter's trailing rollers while the filter was on the ""wash"" setting. During the inspection, the employee made contact with the trailing roller. The employee's right bicep was caught between the trailing roller and carriage frame, detaching skin.",1
An employee was putting straps on a load of materials on a truck when the employee stepped on a rock and twisted an ankle. The employee fell on the right knee and required surgery.,1
"An employee slipped and fell while walking down the stairs, injuring her leg.",1
"An employee was checking a 1.5-horsepower sump pump in a washout pit for trucks. As he walked around a truck, he fell to the concrete walking surface, suffering a brain injury.",1
An employee was folding a banquet table when her left middle finger was caught and fractured in the table hinge.,1
An employee was helping a customer troubleshoot the customer's automobile. The employee was leaning over and looking into the car's engine compartment when the hood of the vehicle fell and struck the employee in the head.,1
"On June 17, 2016, an employee was troubleshooting an aerosol line can labeler to try and release a jam. The machine was shut off and did not restart. While investigating the drive belt, his middle and ring fingers were mashed between the belt drive and belt pulley. His fingertips had to be surgically amputated.",0
An employee was delivering mail when he experienced cramping due to heat exhaustion. He was hospitalized.,1
"An employee was placing interior doors on a paint booth conveyor when the employee's shirt became caught in the conveyor. When the employee tried to remove the shirt, the conveyor caught, fractured, and partially amputated the employee's finger.",0
"An employee suffered a laceration after brushing against steel coils, requiring surgery and hospitalization.",1
"An employee was dismantling scaffolding when a board became jammed. When the employee attempted to unjam the board, he lost his footing and fell through the space between the edge of the scaffold board and the wall of the building and struck the ground below. He broke two wrists and his hip.",1
An employee suffered a left index finger amputation below the joint while cutting with a band saw.,1
"On June 16, 2016, an employee fell off a bicycle and sustained a broken fibula and tibia on the right leg.",1
"An employee was looking into a bark conveyor inspection hatch when a gust of wind blew the inspection lid shut on the employee's left index finger, lacerating and fracturing it.",1
"An employee was in a vertical lift welding on a hydraulic line that had a pin-hole. While he was welding, a flame ignited and fluid came down on the front of his torso, burning his chest and arm.",1
"An employee was attempting to install a load beam inside a trailer to support the freight when the freight fell off and struck him, amputating his left ear and lacerating his back. He was hospitalized and required surgery.",1
"An employee was railing a pipe when his left-hand thumb was caught between the pipe flanges, causing an amputation.",1
"An employee slipped and fell while pushing a dolly down a ramp on a trailer, suffering a leg injury.",1
"An employee was mowing along a steep, sloped edge when the mower started to slide. He dismounted from the mower and it followed him downhill, pinning his left foot underneath. He sustained multiple fractures to the left foot.",1
"An employee was operating a forklift and was backing out of an aisle. A second forklift operator who was moving into the aisle did not see the employee who was backing out. The employee was struck by the second forklift's blades, lacerating his thigh. He was hospitalized and required surgery.",1
"An employee fell from a golf cart, struck the asphalt, and suffered a fractured skull.",1
"An employee was observing as his supervisor transferred solid waste to a liquid form and then into a tote. Steam pressure then released from a loose fitting, and the contents sprayed the employee. He suffered severe burns on his upper torso and both forearms.",1
"An employee was moving a door on a cart from the exterior to the interior of the store when a gust of wind caused the door to strike her in the leg, breaking her knee and requiring hospitalization.",1
An employee was loading steel coil into a cradle when the coil severely lacerated his left middle finger. His left middle fingertip was surgically amputated.,0
"An employee was working on a trailer gate air ram. A pin was too small for the arm of the ram, so the employee attempted to remove the pin. When the pin was removed, the ram moved and amputated his right-hand middle finger.",1
An employee was pushing meat through a band saw when the blade contacted and cut his left index fingertip.,0
"An employee began stacking rice on pallets at 6:00 a.m. At 8:30 a.m., he experienced stomach and leg cramps. He was hospitalized overnight for dehydration.",1
An employee was repairing a forklift when a mast cylinder assembly fell rapidly and caught the employee's hand between it and the forklift.,1
"An employee was performing maintenance activities while standing on top of a bracket used for a tie-off point. The tie-off point failed, causing the employee to fall 10 feet to a lower level. He was hospitalized with a fractured right wrist, head laceration, and leg injuries.",1
An employee suffered a middle fingertip laceration while operating a press machine.,1
"An employee was walking down a sloped paved path in the downhill direction when she tripped and fell, fracturing her left hip. The path was littered with many small pine cones.",1
An employee was riding on a powered industrial pallet jack when the pallet jack suddenly stopped and he fell forward. He struck his head on the concrete when he fell off the pallet jack and lacerated his head.,1
An employee was doing quality assurance at his desk computer when he passed out and hit his head on the floor due to dehydration.,1
An employee was moving a 70- to 100-pound steel plate with a coworker when the steel plate fell on and crushed his right middle and ring fingers. A portion of his ring finger had to be surgically amputated.,0
"On June 17, 2016, an employee was cleaning a part with compressed air when the compressed air injured the employee's hand.",1
"An employee was driving a forklift and placing a pallet of aluminum on a racking system when the pallet fell off the racks and landed on the employee's ankle, breaking it and requiring surgery.",1
"An employee was changing the belts on a pumping unit. The employee left one bolt in place and held the 40-pound guard up with his shoulder. The guard slipped from his shoulder and lacerated his bicep, requiring hospitalization.",1
"An employee was setting up his truck to be loaded. As he was stepping up to set up the first position on the tractor, his hand wrapped around a tied-down chain. When he stepped down from the truck, his right ring finger was caught between the chain and a prefabricated hole on the overhead truck ramp, amputating his fingertip.",1
An employee was hospitalized after slipping and falling on a wet floor and fracturing her right hip.,1
"An employee fell from the back of a truck while loading materials, suffering a fractured leg.",1
"An employee was performing his regular duties in the boiler room when a three-way valve malfunctioned and steam was released, causing second degree burns to the employee's right arm and side. He was hospitalized.",1
An employee was helping to place molds into a machine when some pressure built up in the head of the mold. The employee received burns to the left bicep and wrist.,1
An employee was operating a service rig with a snubbing crew when a flash fire or explosion occurred and severely burned the employee.,1
An employee was lowering a lid to a machine when he tried to quickly remove a tool that had been left inside the machine. The lid then smashed two of his fingers on his left hand. His middle and ring fingertips were surgically amputated.,0
"On or about June 18, 2016, an employee was attempting to fluff green beans through a green bean cutter when the employee's hand went into the cutter, amputating the left middle finger to the first joint.",0
"An employee was walking next to a rough terrain forklift when the forklift operator ran over the employee's left foot, fracturing it.",1
An employee was working in the attic when he began to feel nauseated and sick and started vomiting. He was hospitalized with heat stress.,1
An employee fell approximately 8 feet while installing a ladder inside an ocean-going barge.,1
"An employee was attempting to retrieve something from on top of a racking system when the employee fell through the racking and suffered a head injury, requiring hospitalization.",1
"An employee was standing beside a forklift truck, talking to the driver. A second forklift truck backing up in the main aisle ran into a skip pan. The skip pan moved several feet, striking and pinning the employee against the side of the forklift truck. The employee's legs were bruised and swollen.",1
"An employee was attempting to clear a jam/bridge in the extruder by pushing trimmings from plastic bottles into the feed throat of the extruder. His left hand contacted the screw of the extruder, amputating his index and middle fingers below the first knuckle.",1
"Two employees were in rehearsal using motorcycles. The motorcycle tires touched, causing a crash. One of the employees was hospitalized with a broken jaw.",1
"An employee's thumb contacted a tomato-slicer blade, amputating a quarter-inch of the thumb tip.",1
An employee tried to catch a paper roll that was tipping over and his right pinky finger was caught between the roll and a stack of pallets. His finger was fractured and required surgery.,1
An employee was operating a dough mixer and pushing dough around the trawl when his right thumb tip was caught and amputated in a nip point.,1
"While carrying a pot of boiling water, an employee collided with a second employee, spilling the water on the second employee's legs. The second employee was hospitalized when the injury became infected.",1
An employee was driving a forklift in the warehouse parking lot when he became disoriented from the heat.,1
An employee was putting together steel with another connector when his right thumb was caught between the vertical column and the horizontal beam. He broke his right thumb and was hospitalized.,1
"An employee was working from a 10-foot platform, tripping tubing, when the elevators made contact with a stub on the next joint of tubing. The employee dismounted the platform and landed on the ground 10 feet below, breaking both legs.",1
"An employee was rolling out the slip sheet (filter fabric) for the protected membrane roof when he fell 14.5 feet through a roof-access opening, breaking a wrist and two back bones. He was hospitalized.",1
"An employee was installing a lighting fixture from a stepladder when the employee contacted energized electrical parts and was shocked. The employee then fell from the ladder. The employee suffered an electrical burn to the hand, as well as a bruised back.",1
"When an employee tried to pull a piece of paper off a glue applicator, the employee's left thumb was pinched between the glue applicator and the glue roller. The employee suffered an open wound, possible fracture, and possible amputation to the left thumb. The machine was running at the time of the incident.",0
"An employee was using a chainsaw to cut a felled tree into sections once it was on the ground. The tree broke/snapped, and a section of the tree struck and pinned the employee's lower leg, causing multiple tibia and fibula fractures.",1
An employee was operating a machine to core holes in a product when the machine amputated the employee's right-hand little finger below the nail.,1
"An employee was marking plates for framing on the 2nd floor while standing on a 6-foot ladder. He slipped and fell on his way down the ladder and struck his head, cracking the back of his skull.",1
"An employee was attempting to adjust the billet loading sensors when the billet loader actuated forward approximately 5 feet, catching the employee between the billet loader and the extrusion press. The loader struck the employee in his lower left leg, resulting in an amputation to his left leg below the knee area.",0
"An employee had changed the blade on a band saw and was manually spinning the wheel when his finger was caught between the blade and the wheel. His left middle finger broke, and his left cheek and right palm were lacerated.",1
An employee was feeding a towel into the towel folding machine when the employee's left hand was caught and lacerated in the machine.,1
"An employee working in a boom lift came in contact with a 277-volt electrical line, suffering a third-degree burn to the left hand and a right-hand laceration.",1
An employee was sorting cattle and was moving cows from one pen to another when a cow kicked his lower leg. He suffered a broken tibia and fibula in his left leg.,1
An employee was troubleshooting a lighting circuit from a ladder when the employee fell 4 feet off the ladder and hit the concrete floor below. The employee sustained a head laceration and a broken tailbone.,1
"An employee was cleaning a slicer when her fingers contacted the blade, lacerating her ring and pinky fingers. She was hospitalized.",1
"On or about June 20, 2016, an employee was loading a steel coil on a machine when the steel coil fell onto his leg and hit his arm. He suffered a left leg fracture and a right arm injury.",1
"After working in the hot kitchen area, an employee became sick with nausea and stomach pains. She was hospitalized for dehydration and heat stress.",1
"An employee was sweeping out a trailer and stepped on a nail, injuring the left foot.",1
"While responding to a wild land fire, an employee experienced dehydration and/or heat exhaustion and was hospitalized.",1
An employee partially amputated two fingertips while cleaning a deli slicer. PPE was not worn at the time of the incident.,0
An employee fell out of a half-cage that was attached to the forks of a forklift. He suffered a broken elbow that required surgery and was hospitalized.,1
"On or about 6/17/16, an employee was performing mechanical check of a belt loader at a terminal. The belt loader was turned on and put on neutral at the time. The belt loader moved and pinned the employee between two pieces of equipment. He sustained a cut on his leg and required knee surgery.",1
"An employee was walking down a dry dock, performing inspections of the work being completed, when a strong wind blew a ladder off a customer's boat. The ladder struck the employee, who suffered a broken nose, as well as a contusion/laceration to the nose.",1
"On June 20, 2016, at about 9:30 a.m., an employee contacted live electrical parts during a service call and received a shock and burns to 50% of his body. He was hospitalized.",1
An employee suffered a finger amputation while performing maintenance on an edge bander.,0
An employee received second and third degree burns to the left hand and wrist while cooking a piece of fish.,1
"An employee fell approximately 30 feet through an uncovered hole in the floor, sustaining multiple broken bones and a broken nose, and knocking out teeth.",1
"An employee was picking up a 55-gallon gun press lid from a cart to be placed onto a forklift. The lid weighed approximately 100 pounds. After completing the task, he experienced abdomen pain due to a hernia and required surgery.",1
An employee was cutting wood with a table saw when the blade amputated two fingers.,1
"An employee tripped over a throw rug and fell while entering the building, fracturing the right femur.",1
"On 6/20/16, at approximately 10:30 AM, an employee was cleaning an injection molding machine when a coworker turned on the machine, causing a rod to puncture the employee's chest and lung.",1
An employee picked up two pallets using an electric jack with long forks. He was turning around to enter a trailer when he struck a steel column. His right foot went off the operating station of the jack and became caught between the jack and the steel column.,1
"An employee was working at a meshing machine when his right finger was caught in the chain, causing a de-gloving amputation.",0
An employee was admitted to the hospital with signs of heat stroke.,1
"An employee's right index finger was caught in the sealer jaws of a giblet packaging machine, amputating the fingertip.",0
"An employee was sitting on a chair when she slipped out of the chair, fell forward onto her knees, and then landed on her left arm. She broke her left humerus, requiring hospitalization and surgery.",1
"An employee was working near an energized hot water system when hot water released and burned the employee's stomach, groin, and arm.",1
"An employee was monitoring tubing production at the end discharge point when his finger was caught by the discharge gate/table flap, amputating his fingertip.",0
"An employee was struck by a steel beam that fell approximately 40 feet, suffering a head injury, leg fractures, hip injuries, neck injuries, and lower back damage.",1
"On June 21, 2016, a maintenance employee was working from a 6-foot ladder to change a light bulb when he received an electric shock. He fell to floor and broke his right hip, requiring hospitalization.",1
"On or about 6/21/2016, at 1:30 a.m., an employee was inspecting a facility when he stepped into a fountain and twisted his right ankle, fracturing it.",1
"An employee was lowering a concrete lid onto a vault. As he was adjusting its position, his gloved pinky finger was caught between the vault and the lid, amputating his fingertip.",0
"An employee was clearing a jam in the planer when his hand was pulled into the machine, breaking his thumb and ripping skin. He required stitches and was hospitalized overnight.",1
"An employee was helping a forklift operator organize the yard, placing cribbing to be used under a steel angle iron, when he was struck by the forklift while it was backing up. He suffered a broken pelvis and internal injuries.",1
"On June 21, 2016, an employee sustained a right index finger amputation while clearing a film jam from a machine.",0
"An employee working outside, assisting with debris removal from the pool vault, had left the area to get something from the work truck.  Another employee at the worksite found the employee unconscious in a full seizure, possibly due to extreme heat conditions.",1
"An employee was packaging PVC pipe on an extruder when the PVC pipe became misaligned on the transfer arms prior to the chamfering process. When the employee attempted to realign the pipe, the chamfer unit activated, causing the employee's thumb to become trapped between the pipe and the chamfer device. The employee's left thumb was partially amputated.",0
An employee suffered a finger amputation while working on a brake press.,0
An employee was working with the conveyor chain and bag closer when his right-hand fourth fingertip was amputated.,1
"An employee was drilling fence post holes with an auger bit attached to a skid steer. The auger bit was coming loose so the crew pulled it out to tighten it up. The auger bit fell over after it cleared the hole and pinched the employee's left calf against the skid steer, causing a severe laceration that required hospitalization.",1
"An employee was working on an HVAC system when the fan blades cut his right middle finger, resulting in a fingertip amputation.",0
An employee was observing a coworker while on a platform used to load fat or mill to tanker trucks when he fell from an elevation of 10 to 12 feet to the concrete surface below. He suffered a head injury.,1
An employee was hospitalized for heat-related illness after delivering mail.,1
"An employee was in a stock picker, stocking a pallet, when carton(s) fell off the pallet and hit the employee, causing crushing injuries. The employee's arms were pinned to the arms of the seat and a carton/tiles hit the employee's leg.",1
"An employee was trying to unjam a drive shaft on a vacuum pump with a pipe wrench. The drive shaft unjammed, causing the pipe wrench that was still on the drive shaft to spin and strike the employee in the head and eye socket area. The employee suffered a head laceration and a skull and eye socket fracture.",1
An employee fell from a ladder and suffered a broken leg.,1
"An employee was moving a die with a coworker when the die fell on and crushed the employee's right hand, requiring surgery and hospitalization.",1
"An employee was performing a lockout/tag-out procedure on a tank line and attached an air hose to clean the line. The pressure caused the flank to break, spraying and burning the employee with nitric acid.",1
"An employee was performing maintenance and preparing a miter gate for removal. The ""strut arms"" were disconnected from the lift gate. The employee was using a hydraulic ram jack and placing it under the partially lifted strut arm when it became dislodged and fell due to gravity, crushing and breaking bones in the employee's left hand.",1
The employee was performing maintenance on the PMB SUK Cigar Over Roll Machine when he accidentally hit the jog switch which turns on the machine. His right hand was then caught between the wrapping device and the wrapper die roller assembly. He was admitted to the hospital for surgery to repair the laceration and fracture to his right hand.,1
An employee was cleaning a scraper on a moving belt conveyor when the tail pulley severely lacerated the employee's left calf muscle. The employee was hospitalized overnight.,1
An employee working on a roof experienced nausea and was hospitalized for heat-related illness.,1
An employee suffered a leg amputation after being pinned by a metal extrusion machine.,1
"An employee was trying to move a scaffold when it collapsed. The cross member detached from the scaffold and the employee's right hand was caught between the crossbars, amputating the pinky and ring fingertips.",1
"On June 21, 2016, an employee was attempting to get metal back on track in a roll forming machine when the roll former amputated the employee's right index fingertip.",0
An employee was working from an aerial scissor lift when a coworker activated a crane to test the limit switches. The crane hook snagged the aerial lift on the way up and threw the employee to the ground. The employee suffered a broken wrist and bruised ribs.,1
"An employee was tack-welding a small part onto a larger assembly when a weld wire bounced and punctured his left index finger, requiring hospitalization.",1
"An employee was removing product from inside a ball valve. The spring mechanism delayed the closing of the ball valve; when it did close, it pinched and lacerated the employee's left pointer finger just below the nailbed.",1
"On or about June 21, 2016, an employee was at a customer's residence to provide an estimate for a chimney repair. As the employee was climbing the ladder, he lost his balance and fell, injuring his back and ribs.",1
An employee was repairing a pipeline at a residential home. The employee took the pipe apart and was handling the pipe and fittings when contaminated debris from within the pipeline contacted the back of his hand. He suffered skin irritation to his left hand that became infected and swollen.,1
An employee suffered three fingertip amputations while unclogging a sandblaster.,0
"On or about 6/21/2016, employees were moving a scaffold. While going over a piece of equipment, they lifted the scaffold and a piece of material fell from the top. The piece landed on an employee's femur, fracturing it. The employee was hospitalized.",1
"An employee was aligning sheet metal in a shearing machine when the employee's hand slipped and the piece that holds the part came down on the employee's right ring finger, amputating the fingertip. The shear has a foot control that was activated when the employee's hand slipped.",0
"An employee was working on an embosser on the extrusion line when his left index fingertip was crushed, resulting in an amputation.",0
"When an employee opened the rear door of a trailer, a bed rail slipped out of a cardboard shipping container and struck her in the head. She was hospitalized for a possible concussion.",1
An employee was preparing material to be roped up to a scaffold crew when a pipe struck him on his hard hat. He suffered a bump on his head.,1
"An employee was overcome by heat while performing roofing activities, requiring hospitalization for heat stress.",1
"An employee was trying to dislodge a rusted brake pad on a logging truck by striking the brake with a hammer. The truck then rolled and struck the employee, causing bruising, strain, and sprain injuries to his legs, hips, and pelvis.",1
An employee was attempting to clean a molding machine when the rotating dowel knife blade amputated his thumb and forefinger. The machine was unguarded at the time of the incident.,1
An employee was lifting power tongs from a tong cradle when his finger was caught between the tongs and tong cradle. His right middle fingertip was amputated.,0
"An employee was placing a shim under a mold and using a crowbar to raise the mold when the crowbar slipped, allowing the mold to drop onto and amputate the employee's left index fingertip.",0
"A company was installing an irrigation pivot when the pump malfunctioned, allowing the water to seep back down the hole. When an employee attempted to slow the spinning shaft, it amputated his right-hand pinky and ring fingers.",1
"On or about 6/22/16 at 2:15 pm, an employee suffered from heat stroke.",1
"While walking across a concrete barrier, an employee lost his footing and struck his forehead on the concrete barrier, suffering a forehead laceration.",1
An employee fell off a ladder after getting shocked.,1
"An employee went to move stacked interlocking metal baskets. The baskets were not fully interlocked and the interlock came down and pinched the employee's left index finger, amputating the fingertip.",1
"While driving down a park road in a utility vehicle, an employee lost control of the vehicle and hit a ditch. The vehicle fell on its side and pinned the employee's leg underneath.",1
An employee was placing an empty bucket through an opening when the employee's hand was pinned between a concrete ledge and the bucket. The employee suffered a hand fracture and required surgery.,1
An employee was working in a launder trough inside a clarifier structure when he fell out of the trough to the concrete floor 16 feet below. He was hospitalized with a head injury.,1
An employee felt ill at work while delivering mail on a walking/driving route. He was hospitalized for heat exhaustion.,1
An employee began to cramp while working on a forklift. The employee was hospitalized for a heat-related illness.,1
"An employee suffered from heat exhaustion while taking metal products off the belt or table, requiring hospitalization.",1
An employee was flipping over a precast form pan to remove the precast concrete product when the form pan fell and fractured his leg just above his steel-toe boot. He required hospitalization and surgery.,1
An employee entered a 5-foot trench to fix a broken water line when the trench wall caved in and trapped the employee from the thigh down.,1
An employee was selecting packages from the back of a delivery truck when he started feeling sick.  He was hospitalized for dehydration.,1
"An employee was cutting wood on a table saw when the employee's left hand came in contact with the saw blade, amputating the two middle fingers.",0
"On June 22, 2016, an employee had been performing maintenance on service equipment when he was found not fully responsive and slightly incoherent in his truck. He was hospitalized with heat exhaustion.",1
"An employee was removing insulation from the sheetrock ceiling of a roof when he stepped on the sheetrock ceiling and fell 20 feet to the floor below. He suffered a fractured skull, broken ribs, lacerated spleen, broken left wrist, and bruised kidney.",1
An employee was cutting rubber parts on a bench cutter when the blade came down and cut her right middle finger (possible amputation).,0
An employee was attempting to remove a piece of material from a press when the press activated and partially amputated his right index and middle fingers.,0
"An employee operating a high-reach lift truck became pinned between the lift and a racking system, suffering a fractured rib.",1
A maintenance employee was cleaning straightening machine rollers with a rag when the rollers caught the rag and pulled the employee's left hand into the machine. The employee's hand was severely bruised.,1
An employee amputated the ends of three fingers when a shaper/cutter grabbed a work piece and kicked it back.,1
"An employee was carrying new filter cartridges upstairs when he lost his balance and fell down the stairs, striking the right side of his face and left arm. His left arm broke in three places, his right eye socket broke, and his chin was lacerated.",1
An employee fell from the second floor while installing a gutter system and was hospitalized.,1
"An employee was trying to clear a jam in a cutting machine. When the jam cleared, the machine automatically started back up, amputating the employee's right ring finger.",0
"On June 22, 2016, an employee sustained an amputation injury as performing maintenance on a push nut machine when the machine cycled and amputated the employee's left index fingertip. The machine was unguarded at the time of the incident.",0
"An employee was shutting down a riser pipe to a fire sprinkler system in a section of a building. After performing the shutdown, he went through a set of double doors and onto a small walkway that led to the mechanical room of the elevator. The elevator's floor had been removed as a result of a construction project, and the employee fell approximately 80 feet down the shaft. He suffered spinal fractures, leg fractures, and a broken arm.",1
"An employee was walking through a pen when a steer bumped him. He hit a fence, breaking a bone in his leg.",1
"An employee was cutting a piece of poly-core sheeting with a chop saw when the employee's fingers contacted the blade. The employee suffered lacerations to the left thumb, index finger, and middle finger.",1
An employee tripped over a pallet and fell breaking the left elbow.,1
"An employee was using a tugger to pull electrical wiring when his right pinky finger was caught between the wheel on the tugger and the rope being used to pull the wiring, amputating his pinky fingertip and requiring hospitalization.",1
"On June 22, 2016, around 10:00 PM, an employee was riding in a utility vehicle when his two-way radio came loose from his belt. As he attempted to catch it, he fell from the vehicle and broke his left leg, requiring hospitalization and surgery.",1
"An employee had been welding in a clean fuel tank while standing on a scaffold when he became dizzy. He fell off the scaffold and suffered fractured vertebrae, a fractured left scapula, and a fractured rib.",1
"An employee climbed into the cab of a crane and, while adjusting his seat, placed his hand between the opening of the cab door and the side of the cab. A coworker in the area came along and closed the door during the process, amputating the employee's right ring finger.",0
"An employee was retrieving a mold from a racking system when the employee tripped over the support to an upright on the vacuum tube. The employee fell while holding the mold. Upon hitting the ground, the mold smashed the employee's right-hand index finger, resulting in a fingertip amputation.",0
"An employee fell approximately 5 feet from a ladder to the concrete floor below, suffering a back injury.",1
An employee was stepping over an 18-inch silt fence when he tripped and broke his right ankle.,1
An employee was getting materials to set up the work site when a heavy sheet of plywood injured the employee. The employee sustained broken ribs and a deflated lung.,1
"An employee was felling a tree when an adjacent tree fell on him, cracking several vertebrae and his right ankle.",1
"An employee dumped a load of dirt off at a job site and, before departing, exited the truck to clean dirt out from the back of the dump truck. He was parked behind a track-hoe that was being operated at the time. The track-hoe struck him, breaking two bones in his right lower leg.",1
"An employee missed the last step of an escalator and fell coming down it. She fractured her right ring and pinky fingers, requiring surgery.",1
"On June 22, an employee suffered the amputation of three fingers due to a chipper accident.",0
"An employee was performing maintenance on a tractor-trailer dolly leg when the trailer fell over and crushed the employee's left ring finger, which had to be amputated.",0
"On June 22, 2016, an employee sustained partial left index and middle finger amputations while operating a form machine.",0
"An employee was cutting pork loin meat with a band saw when the blade cut her right index finger, damaging tendons and requiring hospitalization.",1
"While walking to deliver mail at a residential home, an employee tripped and fell on the side of a walkway, suffering a right wrist fracture.",1
An employee was operating a saw and experienced heat related complications.,1
"While chasing a resident, an employee fell and broke a leg.",1
An employee was power washing the building from a boom lift. The lift tipped over and the employee fell. The employee's head struck the boom causing a traumatic brain injury.,1
An employee's middle finger was amputated when it was pinched between a rubber feed tire and a steel tube.,0
An employee was moving a proofer to the walk-in freezer when his right ankle hit the proofer. His ankle later became swollen and required hospitalization.,1
An employee was placing stones on each side of a waterfall when his hand became pinched between an excavator bucket and the 'thumb' of the excavator as he was undoing a strap for setting the stone.  His hand was lacerated and bruised.,1
An employee was delivering packages and was found by another employee in poor condition. The employee was hospitalized for heat exhaustion.,1
"An employee was cleaning up chub bags in a freezer due to a malfunction in the packaging machine when he slipped on the slick floor and fell on his back, breaking ribs and suffering bruising.",1
An employee was lifting a metal water gate and placing it into the front bucket of a loader.  The water gate shifted and the employee lost control of it.  His right pointer fingertip was caught between the water gate and the bucket of the excavator. His finger broke and was lacerated across the nailbed.,1
"An employee fell from a 6-foot step ladder while working with another technician to install an air duct.  The employee cracked their left shoulder blade, fractured two ribs and suffered a concussion and a bruised lung.",1
"On June 23, 2016, at approximately 1:30 p.m., an employee had lowered the handicap lift of a resident transport bus in a parking lot to load a resident from an appointment. The employee tripped over the lift, fracturing the left femur above the knee, and was hospitalized.",1
"An employee was walking into the dock leveler pit when his foot became tangled in the chain used to raise and lower the dock overhead door. He tripped, falling to the ground and fracturing his right ankle.",1
"An employee was installing metal flooring and had rested the pieces to be installed. When the employee moved one of the metal grates, the other fell over and landed on the employee's hand, amputating the left ring fingertip.",0
An employee climbed over a fence and when he jumped down he landed on the ground and broke his left leg.,1
"On or about June 23, 2016, at approximately 2:30 p.m., an employee was walking near the Emergency Room registration area when her foot was caught on a rug and she fell. She fractured her right hip and required surgery.",1
An employee's pinky finger was crushed between a table and a machine.,1
"On or about June 23, 2016, an employee was pulling trim from a conveyor belt when the trim broke, causing the employee to fall backwards. During the fall, the employee's left arm was caught under a roller, breaking it.",1
"An employee was using a wire-pulling jack when the employee's left hand was caught in the piston jack and wire, breaking the pointer and middle fingers.",1
"An employee, visiting a patient at home, fell on the front porch and broke an arm.",1
"An employee was cleaning a mobile field storage tank with a pressure washer hose when it shot him in the left hand with 5,000-psi water pressure, lacerating his middle finger and causing tendon damage.",1
"An employee removed a forged bolt and tossed it in a nearby keg. The bolt hit the rim of the keg, bounced back, and slid down between the employee's jeans and aluminized PPE pants. She suffered a third-degree burn on top of her left ankle.",1
"On June 24, 2016, an employee suffered a finger amputation while using a miniature roll winder machine.",0
"An employee was taking down the garbage when she slipped and fell down the lobby stairs, injuring her right foot.",1
"Two employees were driving stackers, traveling in the same direction one behind the other and with the squeeze mechanisms trailing. The first employee stopped, and the squeeze mechanism of the first stacker went through the back opening of the driver's compartment and struck the second employee in the pelvis.",1
"An employee was performing a die and pin change on an extruder line. The employee moved the automatic cutting machine away from the extruder. When the employee hand-fed material through the cutting machine, it cycled and amputated the right index and middle fingers.",0
"An employee went to straighten coil steel on the coil forming machine when a coworker activated the machine. The employee's left hand was then caught between the coil and snubbing wheel, lacerating his hand and dislocating his thumb.",1
"An employee was cutting blocks with a microtome machine when the employee's left index finger was caught in the machine, amputating the fingertip.",0
An employee amputated two fingertips while retrieving a rag from a conveyor system.,1
An employee suffered a fingertip amputation while cutting wood with equipment.,0
"On June 23, 2016, an employee was found unconscious on the ground and was hospitalized with a knee injury.",1
"An employee was servicing a sprocket and chain on a conveyor belt when the employee's right thumb was caught between the sprocket and chain, amputating the thumb tip.",0
An employee was moving a kettle of molten metal when the molten metal spilled and burned the employee.,1
"An employee was attempting to re-secure his load when the load shifted and fell on top of him fracturing his pelvis, femur and vertebrae.",1
An employee was cleaning an empty space at the job site when a recluse spider bit his lower left leg.,1
An employee was injured while operating a saw to cut a plastic sheet. The employee's hand slipped resulting in the employee's right thumb being amputated near the first joint.,1
"An employee was in an elevator toward the rear of the car when a mason began to enter the elevator with an electric pallet jack that was loaded with a pallet of bricks. The mason lost control of the loaded pallet jack and struck the employee in the stomach, pinning him between the bricks and the rear elevator gate. He was hospitalized.",1
"An employee was on a workover rig, transferring rods from the transfer and screwing them in, when his glove/sleeve became snagged on the equipment and was twisted around, amputating his left thumb.",0
An employee was in the bathroom cleaning when she slipped and fell on the bathroom floor fracturing her left patella.,1
"While setting up a machine, an employee's left index fingertip was amputated.",0
"An employee was holding material for a coworker who was using a manual shear to cut a piece of sheet metal. When the coworker engaged the shear, it amputated the employee's left index fingertip.",0
"An employee was using a gas-powered chop saw to cut through a water line. When he made the second cut, the pipe slipped down and bound the saw blade. The saw wrenched from his hands, rotated, and came back with the blade cutting the employee from the shoulder across the chest.",1
"On 6-23-16, an employee was cutting plywood with a saw when the blade cut his palm and amputated his pinky finger, requiring surgery.",1
"On or about June 23, 2016, an employee was injured when he fell into a hatch opening, fracturing his left humerus.",1
"An employee was servicing a dumpster and placing it into its metal compactor housing. The dumpster did not make contact with the interlock switch. When the employee attempted to reposition the dumpster, the dumpster shifted and pinched his left thumb. He attempted to remove his left hand, and his thumb tip was amputated.",0
"An employee had just emptied a dumpster with a front-load dump truck and was trying to make sure the dumpster went all the way back into its metal housing enclosure. While his left hand was on the top edge of the dumpster, his left thumb became pinched between the metal housing and the dumpster underneath it. About a quarter-inch of his thumb tip and part of his fingernail was amputated.",0
"An employee was on top of crates, helping to rig them to a boom lift, when he stepped into a hollow area in a crate that was covered by plastic wrapping and fell approximately 10 feet to the ground. He suffered multiple right-heel fractures.",1
An employee was pushing a buggy with windows near the shipping department when he struck a pole and crushed his left pinky finger between the buggy and the pole resulting in a fingertip amputation.,1
An employee was using a nail gun to attach molding inside a home when a nail came back and hit him in the eye.,1
An employee's finger was amputated when it got caught in a chain vice used to clamp stock for a band saw.,1
"An employee fell 5 to 6 feet while moving material into a dumpster, fracturing ribs and bruising the lower back and left hip.",1
"An employee was cutting a piece of finger-jointed wood using a table saw. The wood caught the blade, which caused it to strike the employee in the middle of the abdomen, causing serious internal injuries that required hospitalization.",1
"An employee was working from a baker scaffold when the steel frame pole pulled away from the scaffold and the employee fell onto the pole, puncturing his armpit.",1
"On June 25, 2016, at approximately 12:10 p.m., two employees were digging with hand tools around a main telephone pole when the push pole fell and struck one of the employees. The employee was hospitalized with a fractured pelvis that required surgery.",1
"An employee was loading a hose for testing in a tensioner when the clamping mechanism activated while his index finger was between the clamp and hose. When he pulled away, his fingertip was amputated.",0
An employee got his hand caught in the rotating drum of the sausage reworker machine resulting in the amputation of three fingers.,1
"On 6/23/16, at 11:50 a.m., an employee was working from a 6-foot step ladder using a cordless screw gun when he lost his balance and fell to the ground, breaking four ribs and requiring hospitalization.",1
"On the morning of June 24, 2016, at approximately 1:00 a.m., an employee attempted to lift a fan assembly off of a shipping pallet when the chain from the hoist became entangled or loose, causing the housing to tip off center. The employee tried to keep the housing from falling, and his left-hand fingers became caught between the housing and shop floor. His left ring fingertip was amputated.",1
"An employee was attempting to unjam a hand tool that was lodged in the baler crush plate and baler wall. When the jammed hand tool came loose, it struck the employee's left index finger, amputating the fingertip.",0
"An employee was opening the door for coworker when a gust of wind caught the door. The employee's hand was then pinched between the door and the outside wall, amputating the right ring fingertip.",0
"An employee who was tending to masons began to feel light-headed, weak, and dizzy, requiring hospitalization for possible heat exposure.",1
"On or about June 24, 2016, an employee was helping to remove a cardboard bale from a baler when the bale became displaced and struck the employee, pushing him to the ground. He suffered a fractured pelvis.",1
An employee was standing on a step ladder and reprogramming an overhead garage door in the company shop when the garage door opened and knocked him off of the ladder to the concrete floor. He suffered a facial fracture and right arm laceration.,1
"An employee was unloading a vehicle when the vehicle rolled, pinning her between the loading dock and vehicle. She suffered a broken leg.",1
An employee sustained a right index finger amputation while cleaning a machine. The machine was not locked/tagged out at the time.,0
"An employee was troubleshooting a rod welder when a coworker pushed a valve that closed on the employee's right index finger, amputating it at the first knuckle.",0
"An employee was pulling the die from a rack when the push/pull mechanism of the die cart failed. When the employee realized this, he removed the chains from around the die and proceeded to set the brake, then pushed the die onto the die cart from behind the rack. The die cart then moved backwards, causing the die to start to tip and fall. When the employee tried to grab and stabilize it, the center of gravity for the die was over the edge of the die rack shelf, and the die fell and trapped the employee's arms between the top of the die and the underside of the die rack shelf. He broke both wrists and was hospitalized.",1
"An employee was moving an overhead crane and had the crane remote in his hand. He was lifting a bundle of rebar with the crane. There was another free-swinging chain hanging from the crane. The hook at the end of the free-swinging chain hit the employee in the face, crushing the right side.",1
"An employee was loading a steel standard on a flatbed truck when his right index finger was caught and crushed between the standard and the steel, requiring hospitalization. Gloves were worn at the time of the incident.",1
An employee was dismantling shoring equipment when his right ring finger was partially amputated.,0
An employee was placing trays from ovens on cooling racks when the employee suffered from possible heat exposure and was hospitalized overnight.,1
"Two employees were taking an old boiler unit that had been inactive for several years and replacing it with a new unit. One of the employees had been cutting some of the old piping and the other employee started to take off the controls from the boiler. At some point, the employee taking off the controls hit a control that opened a valve on one of the pipes that had already been cut. That particular pipe was attached to another active boiler. When the valve opened it sprayed the other employee that was cutting out the old piping with hot water and steam causing first and second degree burns to his chest, arm, shoulder, and knee. He was hospitalized.",1
"An employee was watching the railing to determine the height that the railing needed to be raised when he slipped and fell back. His left foot was then caught between the staging and the transferring railing, causing a foot injury.",1
"An employee was tightening a turnbuckle when the weld broke and it struck the employee's left knee, causing a contusion.",1
"An employee was helping a mechanic demobilize a grout silo when his finger was caught between the support leg and the floor, lacerating his right middle finger and amputating part of the fingertip.",1
An employee that was prepping alongside the curb began to feel ill and was hospitalized for possible heat exhaustion.,1
An employee was holding and using a pressurized pneumatic grease gun when a leak in the line caused pressurized grease to inject into his left middle finger between the first and second knuckle.,1
"An employee was cleaning product off the floor when a pallet fell from storage and struck the employee, fracturing the employee's leg and causing back pain.",1
An employee was helping to load a trailer in the loading bay and was standing at the rear end of the trailer on the driver's side. He was using a piece of wood on the edge of the trailer bed to help locate the center and took a step forward. He then fell into the four-step stairway and fractured four ribs.,1
An employee became overheated while working in a parking garage as a venue usher. The employee was admitted for heat exhaustion or heat stroke.,1
An employee fell off the roof while installing solar panels and suffered a broken leg.,1
"An employee was operating a mini excavator on a slope when the excavator tipped over and rolled over the employee's ankle, breaking it and requiring hospitalization.",1
"An employee was manually feeding fabric into a winder machine when her left index finger was caught between a conveyor belt roller, amputating the fingertip.",0
An employee injured his fingers while using a meat grinder.,1
"An employee was setting up a hob machine and adjusting the point where the lubricating oil enters the cutting area when the rotating parts caught the employee's glove, pulling his hand into a pinch point area. His left ring finger was amputated, and his left finger was severely lacerated.",1
"An employee was hospitalized when a conveyor that he was moving into a trailer fell on him, fracturing his left fibula and causing a contusion on his right hand.",1
An employee was unplugging the steam table when she received an electrical shock to the hand.,1
"A maintenance employee was responding to an extruder machine that had a malfunctioning water cooling unit. When the employee went to see what was wrong, the machine released hot water and steam, which struck the employee in the arm, torso, and feet.  The employee suffered burns to the skin and was hospitalized.",1
"An employee was working on a scaffolding system when he slipped and fell 5 to 6 feet, breaking his ankle. He was wearing fall protection at the time.",1
"An employee's shoe became caught on something sticky, causing the employee to lose balance and fall, striking their head and fracturing the right hip.",1
"On 06/24/16, at 5:00 p.m., an employee had been working on paper machines when he began feeling sick. He sat in the break room to cool down and drink water. He later felt nauseous and began vomiting, requiring hospitalization for dehydration.",1
An employee was cutting beef bones with a meat slicer and amputated the side of the right-hand middle finger.,1
"An employee had finished prepping bread for baking and turned the oven on, but the burner did not ignite. When he hit the button again to ignite the burner, the gas that was in the oven combusted causing a flame to reach the door of the oven. The flame burned the employee's right elbow, requiring hospitalization.",1
"While attempting to feel the line in an extrusion line winder reel, an employee's hand was pulled into the machine, causing hand bruising and swelling.",1
"On 6-25-2016, at 8:00 a.m., an employee was fueling his truck in the rain. When he went to step on the fuel island, he slipped and fell on his right hip, fracturing it.",1
"An employee's hand was caught and injured in a laminating machine, requiring hospitalization.",1
"An employee was lifting a man-hole cover with his hand when it fell and struck his right index finger, amputating the fingertip.",0
"An employee was operating a powered pallet jack and loading a pallet onto a trailer when the pallet became stuck. As the employee attempted to move the pallet jack back and forth, the employee fell and was struck by the jack. The employee suffered a broken foot.",1
"An employee was back-stocking in the stock room while standing on a four-step ladder. When she was on her way down the step ladder, she missed the last step and fell to the ground. She was hospitalized and required surgery.",1
"While loading horses into the stock trailer, an employee was kicked by a horse. She suffered a broken left arm between the elbow and the wrist, as well as a broken rib on the left side.",1
"An employee was standing in the parking lot directing work starting at 6:00am. Around lunch, the employee began to experience muscle cramps. He was hospitalized for severe dehydration.",1
"An employee was flushing the intake water of the fossil plant when a pipe broke loose on the unit and struck the employee on the elbow, breaking the employee's arm.",1
"While checking the air conditioning unit at a nursing home, an employee fell from a ladder, suffering head trauma, as well as a fractured rib, pelvis, and wrist.",1
"While putting a bread rack away, an employee's right pinky finger struck a table, severing the fingertip.",0
"An employee was helping to move a dryer up the ramp into the moving truck when he lost his footing, bumped his head on the ramp, and fell to the ground. He suffered a head injury.",1
"An employee was inching paper through a printing feed to clear a tear when the blade advanced on his finger. The skin was removed from his right middle finger, requiring surgery.",1
An employee was working on a wok. A vegetable oil aerosol can located on the counter next to the wok overheated and expelled oil from the bottom vents of the can. The can fell over and rolled at which point it caught fire from the wok. The employee received second degree burns.,1
"An employee was unloading a trailer on the dock when he was struck by a forklift truck and pinned between the forklift and the overhead door, breaking his knee and suffering cuts and an abrasion.",1
"While moving a 55-gallon drum, an employee's hand slipped and their finger was caught between two drums, amputating the right middle fingertip.",0
An employee was sealing bags of ice.  He tried to prevent a bag of ice from falling and his right index finger was amputated by the machine.,0
"An employee was unlocking a device while standing on a cart 4.5 feet above the ground. The employee lost his balance and dismounted from the cart, landing on his feet and fracturing his heels. He was hospitalized.",1
"While working on a light fixture, an employee fell off a ladder to the floor.",1
"An employee was pulling a carcass cart into the hallway when the cart tipped as it turned and landed on the employee's leg, dislocating her knee.",1
"On June 27, 2016, an employee was hospitalized for heat exhaustion.",1
"On or about June 27, 2016, at 1:30 p.m., an employee was proofing an underground 1.25"" polyduct when a blowing gun blew out of the line due to built-up back pressure. The employee had been standing to the side of the polyduct to be out of the line of fire.  When the blow gun came out of the duct, the employee stepped over to pick up the gun to turn the air off and the blow dart then came out of the duct, striking him on the right shin. He was hospitalized and required surgery for a broken right tibia.",1
"An employee was dismantling a trash chute when he was struck by a 5-pound brick that was stuck in the chute, severely lacerating his forehead and requiring hospitalization.",1
"An employee was operating a reach truck when his foot was caught between the reach truck and a beam, injuring his left heel.",1
"An employee was taking apart a round spool of wire, which weighed 1,100 pounds. The spool was standing up on the round edges and was then knocked flat on the ground. The employee's foot was caught by one of the round ends of the spool, causing a compound fracture to the left ankle that required hospitalization.",1
An employee fell into an excavation and broke his femur.,1
"An employee was working in an excavated trench, putting together PVC pipe. A board from the fifth floor fell off and struck the employee's right arm, breaking the humerus.",1
"An employee was operating a backhoe when he struck a security gate. When he attempted to lift the security gate, the gate fell on him and fractured his neck.",1
"An employee arrived at a worksite, opened the lease gate, drove the vehicle through the gate, and exited the vehicle to close the gate when the wind caught it. The employee tried to block the gate from hitting the company vehicle. The gate caught his thumb between it and the vehicle door, amputating flesh on his left thumb tip.",0
"While performing measurements for a lime operation, an employee was caught between a pickup truck and a dozer blade, breaking the right leg.",1
"An employee was helping a backhoe operator rig crane mats when he possibly became caught between the backhoe and the crane mats that he was spotting. He was found unresponsive with head and back injuries, requiring hospitalization.",1
"An employee was installing a joist when he fell down, breaking his shoulder and injuring his head. He was hospitalized.",1
An employee was coming into work and opened the door. Stripper that was being placed had puddled under the door. The employee slipped on the floor and broke the left wrist.,1
"On or about June 27, 2016, an employee was cutting metal banding from a steel coil. As the employee pulled the last of the four cut bands from the coil, the cut end of the bands punctured the employee's arm, causing a deep laceration.",1
"An employee was checking the straps on the load on his trailer and moving empty carts in the loading area when he was struck by a forklift, breaking his right leg.",1
An employee was attempting to align a part on the block machine when his right middle fingertip was amputated.,0
An employee was clearing a jam in the shear when the machine activated via the foot pedal and amputated three right-hand fingers above the second joint. The machine was unguarded at the time of the incident.,0
"An employee was measuring a parapet wall on the front portico of a hotel building when he lost his balance and fell approximately 18 feet, breaking both legs, his knee, and his ankle. He was hospitalized.",1
An employee was operating a front loader. His right hand was caught in the door when it closed and 1/3 of his right index finger was amputated.,0
An employee was moving a bundle of steel straps 2 inches wide by 21 feet long off of a delivery truck. The employee was holding onto them when the bundle shifted and the employee's right index fingertip was amputated.,0
"On June 27, 2016, at approximately 8:00 a.m., an employee was unpinning traveling blocks from a top drive when the blocks shifted and his right hand was caught in a pinch point, amputating his ring fingertip.",0
An employee was inspecting the water pipe from a fire hydrant for leaks. The pipe burst and hot water burned the employee's stomach and legs.,1
"An employee was approximately 8 feet high, standing on an extension ladder that was leaning on the exterior wall of a house. He reached out to the right and above his head to place a nail in the fascia board when the ladder slid to the right and down the wall surface. He fell down to surface level and landed on the ladder, breaking his left fibula, tearing ligament near his left ankle, and rupturing his right Achilles tendon. .",1
An employee suffered an asthma attack while casing mail.,1
"While taking measurements, an employee was struck on the head by an elevator bracket, suffering a concussion.",1
An employee's left index finger was amputated while operating a wood chop saw to cut pant bars for hangers.,0
An employee was placing a part on an assembly machine and amputated her right middle fingertip.,0
"An employee suffered a left knee laceration while cutting cable with a knife, requiring hospitalization.",1
An employee was inserting a piece of aluminum into the rotating piece of a horizontal lathe when his right-hand pinky finger was amputated at the knuckle.,1
"An employee climbed a tree to cut a branch. As he descended, the length of the rope lessened, and he fell 30 feet.",1
"On June 27, 2016, at approximately 10:30 AM, an employee was helping to install a boom extension when it suddenly fell and hit the employee, fracturing his pelvis bone.",1
An employee was picking up a box that had a knife sticking out of the side. The knife lacerated his right calf.,1
"An employee slipped on a piece of wire covering. He twisted his knee, fracturing his patella and tearing a tendon. He was hospitalized for surgery.",1
"On 6/27/16, at approximately 11 a.m., an employee was walking upstairs on the way to clean the bathroom when he passed out and hit his head on the concrete floor possibly due to overheating. He was hospitalized with a concussion.",1
An employee was unloading construction materials (steel) to be inventoried when his fingertip was pinched and amputated between two pieces of steel.,0
"An employee was straightening boards on the landing table when his right hand was caught in a roller. His left middle and ring fingers were injured, and his ring finger was amputated at the hospital.",1
An employee amputated a finger while clearing a jam on a sheeter machine.,0
"On or about June 27, 2016, an employee was unloading food products from the rear of a trailer using a hand truck when he fell with the material to the pavement below, suffering multiple leg fractures.",1
An employee was operating the sandwich wrapping machine and amputated the left ring fingertip.,1
An employee had delivered a parcel to a house and stepped off the step onto a walkway when she twisted her left ankle. She then tried to catch herself with her right leg and heard a pop. She fractured her right leg in three places and was hospitalized overnight.,1
An employee was troweling concrete and fell 8 feet off the edge of the foundation wall resulting in back and head injuries.,1
"An employee was standing to the side of a recycling bin. When a forklift moved the bin, a large roll of steel (approximately 800 pounds) that was beside the recycling bin rolled across the aisle from the coil rack and struck the employee. The employee suffered broken toes and leg injuries.",1
"An employee was moving 2x4's into a single-family home under construction when he fell into a floor hole in the middle of the floor, breaking ribs, puncturing a lung, and fracturing neck vertebrae. The floor hole was unguarded at the time of the incident.",1
"On or about June 27, 2016, an employee incurred a fingertip amputation of the little finger and laceration of the ring finger on her right hand. The employee was operating a laminating machine when the machine stopped.  The employee tried to get the machine started by adjusting the belt.  When she touched the belt, the machine started up, catching her fingers.",1
"An employee was installing filters on a paint booth and fell seven feet off the ladder, breaking ribs and a collar bone.",1
An employee bent over to pull up a fence post when he suffered a slipped disc in his lower back.,1
"An employee was using a step stool to scan products with a hand-held scanner unit. The employee then fell from the stool, injuring a leg and fracturing the left hip.",1
"On June 28, 2016, at approximately 1:00 AM, an employee went to sit on a high rolling chair when the chair moved and she fell to the floor, landing on her left hip. She suffered a compression fracture to the back and was hospitalized.",1
An employee fell 10 feet when the scaffold he was on collapsed. He was hospitalized with five cracked ribs.,1
"An employee was on a man-lift when it was struck by an 18-wheeler. He fell approximately 15 to 19 feet to the ground below, injuring both legs and lacerating his head. His lower leg was surgically amputated.",1
"An employee was detailing an RV while standing on a ladder. As the employee was climbing down the ladder, he slipped off and fell, fracturing his right leg.",1
"On or about June 28, 2016, an employee was operating a dolly to move a hydraulic brake weighing several hundred pounds. The hydraulic brake fell over and injured the employee's knee.",1
"An employee was riding on the side of a chassis racker (a specialized industrial truck) while being trained. The trainer was in the driver's seat operating the industrial truck. The trainer drove the truck too close to a nearby chassis, and the injured employee's leg was caught between the moving truck and the nearby chassis. He sustained a severe laceration/cut to his left calf/leg that required stitches and overnight hospitalization.",1
An employee was organizing empty boxes after merchandising a store when she fell to the floor and fractured her left fibula.,1
"An employee was using vise grips to repair an overhead door when his left ring finger was caught in the hinge of the tool, amputating the fingertip.",0
"An employee had parked a vehicle. As he was getting out, he felt lightheaded, fainted, and fell to the floor. He did not have a chance to station the vehicle and his body was dragged on the road, injuring his right shoulder and left leg.",1
"An employee was removing dirty iron from a bull ladle when he was spattered by the hot iron and suffered second and third degree burns on his face, neck, shoulders, and arms.",1
"An employee tripped on cardboard and fell while walking, injuring the left leg.",1
"An employee was rotating (spinning) a luggage dolly when his left index finger was caught in the dolly, amputating his fingertip.",0
"An employee was using a lead shot plastic face hammer when the hammer struck his left index finger, breaking it.",1
An employee was bitten on the leg by a rattlesnake and hospitalized.,1
"An employee fell while walking up the stairs, injuring her face and right eye.",1
"An employee was engaged in bird control operations while standing on a ladder. The employee fell from the ladder while descending and suffered back pain, requiring hospitalization.",1
"An employee was loading signs onto a flatbed truck parked on the shoulder of the road when an automobile veered onto the shoulder and struck the employee. The employee suffered broken bones, an internal injury, and a leg amputation.",1
"An employee was unloading a box truck while it was raining. He slipped on the wet floor of the truck bed and fell, breaking his right femur.",1
"On or about June 28, 2016, an employee was using a trim saw to cut down bronze castings when the employee's left hand contacted the cutting blade, amputating the third, fourth, and fifth digits.",0
An employee was trying to remove material that was stuck in the trimming machine when the blade came down and partially amputated his left index finger without bone loss.,0
An employee was distributing milk bottles to calves when his right foot was caught between a walking deck and the suspension wheel of a trailer.,1
"An employee was cutting foam with a disc saw when he contacted the blade, injuring his left middle fingertip. His fingertip had to be surgically amputated. The saw was unguarded at the time of the incident.",0
An employee was starting up a compressor with a fitting on the hard pipe airline. The airline was loose and allowed air pressure to release and hit the employee in the face. His face became swollen and his lungs got air in them.,1
"An employee was helping to remove sand from holding tanks during hydraulic fracturing treatment rigging  breakdown. A pipe containing an auger was being used to remove sand from a tank.  There was an opening at the end to allow the sand to drop from the pipe, and the employee thought the pipe was stopped up. While inspecting the opening, the employee's left-hand index finger was amputated to the distal joint and the middle finger was severely lacerated by the rotating auger inside the pipe.",0
"An employee was moving a 1,300-pound steel skeleton off the plasma table with an overhead crane. The employee set the work piece down on the ground and was trying to manually push it toward the scrap pile. The material shifted and tipped over, striking and pinning the employee between the work piece and a stationary toolbox. The employee suffered fractured ribs and a fractured sternum, requiring hospitalization.",1
"On June 28, 2016, at approximately 8:45 PM, an employee was operating a machine when his arm contacted the shackle wheel guide bar on the equipment, puncturing his right forearm.",1
"An employee was working on the roof taking photographs and measurements when he stepped through a skylight and fell approximately 20 feet, striking metal shelving before landing on the concrete flooring. He suffered fractured ribs (all), a fractured sternum, a fractured back in three locations, and a fractured skull.",1
An employee was walking through an atrium to go from one building to another when she lost her balance and fell into the approximately 1-inch-deep water. She suffered a shoulder injury and required surgery.,1
"An employee was operating a pallet jack and was driving through the curtains to the freezer. As he used his right hand to open the curtain, his left hand was caught between the pallet jack handle and a post, smashing his left thumb. He was hospitalized and required thumb surgery.",1
An employee started removing fiber and cleaning a carding machine while it was being repaired and his right-hand ring and pinky fingers were amputated.,0
An employee was overcome with heat stress symptoms while unloading a trailer.,1
"While adjusting material on the fence of a band saw, an employee's hand contacted the saw blade, amputating the right thumb tip.",0
"An employee was performing preventive maintenance on a pump to a commercial washing machine. After using water to prime the pump, the employee ran the cleaning fluid to the pump. Residual water with cleaning product was caught in a hand-held container. The employee inhaled the cleaning product odor and experienced respiratory tract irritation and distress.",1
"An employee was attempting to straighten a pin with a sledge hammer when the sledge hammer struck his right hand, fracturing his middle and ring fingers.",1
An employee suffered a seizure and fell off the scaffold striking his head and causing a laceration. The employee was also diagnosed with fractured vertebrae.,1
"An employee was working with yarn when her finger was caught in the yarn cutter guide during a string-up operation, causing an amputation.",1
"An employee was pulling a rope connected to tubing when the tubing bent and the attached clamp struck him in the face and collarbone. He suffered a facial laceration and fractured collarbone, requiring hospitalization.",1
"At 11:34 a.m., an employee was working with an electric pallet jack while another receiving associate had a forklift. When the employee went to move the electric pallet jack, the handle was turned in such a way that when it moved, it moved backwards and smashed her left-hand pinky into the forklift battery. Her pinky fingertip had to be surgically amputated.",0
"On or about June 28, 2016, an employee was performing environmental cleaning work when a nearby coworker's brush saw kicked back and deeply cut the employee's left thigh.",1
"An employee was operating an aircraft pushback vehicle. The vehicle began to ""buck"" and the employee struck her head on the windshield, suffering facial cuts and bruises and a spinal compression fracture. She was hospitalized.",1
An employee was operating a forklift to transport wooden skids/pallets when the forklift struck a concrete post in the warehouse. The employee was hospitalized with possible back and leg injuries.,1
"An employee was standing on a 5-gallon bucket to unjam a board on the chain deck when he fell off the bucket onto his right side, fracturing a rib, puncturing a lung, and suffering a laceration behind his right ear.",1
"An employee was moving 50 gallon oil drums at the site shop when he pinched his finger between two barrels, causing a partial amputation of his fingertip.",0
"An employee was fire-taping above the ceiling when his arm brushed against a pipe, scratching his right elbow. His elbow experienced pain and swelling, requiring hospitalization.",1
"An employee was unloading a truck. When he pulled on a tote, he fell onto a metal step and broke his hip.",1
An employee was installing pipes. The rigging slipped and a pipe struck his leg fracturing it.,1
The employee was working on the HVAC system at the restaurant and was bitten by an insect. The employee had a reaction to the insect bite.,1
An employee wasn't feeling well while delivering packages and was admitted to the hospital.,1
"An employee was changing a belt on an air conditioner motor when his right hand was caught between the belt and pulley, amputating his ring finger and fracturing his middle finger.",1
An employee was re-assembling a valve and caught his finger between the valve shaft and a cover plate resulting in a severe laceration of the left middle finger through the bone.,0
"On June 29, 2016, an employee was hospitalized due to a fall on the same level. The employee stepped on a pallet and the pallet moved, causing the employee to fall to the concrete floor resulting in a fracture of the L1 vertebrae.",1
"The employee was directing a mini-excavator onto a trailer when the excavator shifted and struck his hand, amputating a fingertip.",0
An employee's right index fingertip was amputated when the finger was caught between a piece of over-pour and the door to the shaker-shack.,0
"An employee was redrawing a steel wire to reduce the diameter using a redrawing machine. When he attempted to untangle the wire, it amputated his left pinky, ring, and middle fingers.",0
An employee was hospitalized after falling off the platform of a boom truck.,1
An employee was climbing stairs and slipped backwards and struck his head on the steps.,1
An employee's leg was impaled by protruding rebar.,1
An employee was under a running truck tightening a packing gland and was injured by the PTO shaft.,1
An employee leaving the facility around 6:30p.m. was shot in the upper chest and face by an assailant.,1
"Two employees were manually handling two pieces of 3"" x 3"" x 3/8"" angle iron that were 20-feet long, attempting to get the pieces on a band saw. As the employees moved the angle iron onto the saw, the injured employee's right pinky finger was caught between the angle iron and the saw table, amputating the fingertip.",0
"An employee fell approximately 10 feet from a double gang job ladder to the lower level and suffered injuries including two fractured ribs, a punctured lung and a laceration to the back of the head.",1
"Employees were loading regulators onto a truck for delivery when the lifting cable on their digger truck broke causing the regulator to fall. When the regulator fell, it hit a crate and rolled striking an employee's head. The employee suffered three lacerations to the head that required 35 staples and seven stiches. The employee was hospitalized.",1
An employee fell 10 feet to the ground from a ceiling beam during a remediation project.,1
An employee operating a saw on a wing line suffered a left index fingertip amputation.,0
An employee fell while in the back of the truck and injured his right hip.,1
"An employee was hospitalized when she became ill, lost her balance, and contacted the floor resulting in a small linear fracture to the head.",1
An employee was performing bagging operations. The employee reached into the machine to retrieve a melting bag and was caught by the heating bar resulting in the amputation of the right index finger.,0
"An employee was on a scaffold using a chain fall to remove the manway cover to a vessel. As the employee removed the manway cover, the chain fall had too much slack and slipped, catching and amputating the employee's left middle fingertip.",0
An employee was rinsing empty trailers and was bumped on the left hip and pushed into the trailer tire stomach first by a forklift.,1
An employee was feeding a notcher machine and amputated his left ring and little finger.,1
An employee plugged the blood pressure machine into the wall outlet and received an electrical shock.,1
"An employee was injured on June 29, 2016, while driving the camp golf cart.  The cart tipped over and fell onto the employee breaking the left arm.",1
An employee was attempting to unjam the Manchester machine (shapes copper tubing) and amputated the third finger on the right hand at the first joint.,1
"The employee attempted to throw a urinal up and into the dumpster. The urinal struck the top, broke, and fell back striking and lacerating the employee's right forearm.",1
An employee had the right middle fingertip amputated while making adjustments on a moulder that was in operation.,0
An employee collapsed after telling his co-workers he was not feeling well.,1
An employee was directing the use of a tow strap to move a vehicle when the employee's left pinky finger was crushed by a quick coupler that was on a rubber tire loader. The employee's finger was amputated up to the knuckle.,1
"An employee was working from an extension ladder to paint the side of a single-story residential home when he lost his footing, fell to the ground, struck his head on the concrete surface below, and sustained a head injury to the point of unconsciousness. He was hospitalized.",1
"An employee was unloading a box container when the boxes began to fall. The employee tripped and fell while trying to avoid the falling boxes, striking the bottom of the container and fracturing the right clavicle. The employee was hospitalized.",1
An employee was opening a lower clam door on a jet when he felt a burning sensation in his groin. He was hospitalized for a hematoma and infection.,1
"An employee was setting up a part on a lathe. As the machine was spinning, the employee's gloved hand became caught between the spinning part and the tailstock, amputating the employee's left index fingertip.",0
An employee was preparing to hook up a tank trailer to his truck and suffered heat exhaustion.,1
A temporary employee was hospitalized for dehydration while he was working as a CNC machine operator.,1
An employee was rolling up a door on a truck and amputated his right index finger when it was caught in the folding door.,1
An employee was hospitalized for possible infection of lacerations on the left arm that the employee received while attempting to remove debris from an insulation blower.,1
"On June 30, 2016, an employee was working between the cab and trailer of a truck, standing on a six foot ladder. The employee fell backwards and broke his wrist and heel.",1
An employee suffered a finger amputation.,0
"An employee released the park brake on a forklift and went to get something from a van. The forklift rolled forward, striking the employee and breaking the employee's leg.",1
An employee was hospitalized with heat exhaustion and dehydration.,1
The employee was working on the conveyor system from the catwalk and fell 12-15 feet resulting in fractured vertebrae and ribs.,1
"An employee was using a powered walk-behind forklift to move raw material when he was pinned between the forklift and a roll of metal, injuring his hip and liver.",1
An employee mowing lawns was hospitalized for heat stress.,1
"An employee was performing a hot splice, hooking up temporary power to residential construction from a main distribution using a crimping tool when an arc flash occurred. He sustained second degree burns on his left arm and first and second degree burns on his face.",1
An employee was on a back country patrol when his horse bolted. The employee's hand/finger was caught in the bridal reins.,0
"An employee was performing maintenance on skid steer equipment. The employee was changing the bucket and putting pins on. The lock pins were stuck so the employee used a pry bar to pop it loose, but it did not come apart. The employee asked another worker to tilt the skid while the pry bar was in the front of the equipment. The employee's left ring finger got caught between the pry bar and the skid steer carriage resulting in amputation of the finger.",0
"An employee fell approximately 6 to 8 feet from a 12-foot ladder while hanging up a flag outside the maintenance shop, suffering a broken femur.",1
"An employee drove a float in the parade. She parked the float and as she was climbing out of the driver's compartment, the hatch came down onto her left hand which was resting on the edge of the opening. A finger was fractured and dislocated.",1
"While descending from the roof on an extended ladder, an employee slipped and fell approximately 4 feet from the ladder, spraining the left wrist.",1
"An employee was unloading a truck at the loading dock when a nearby dock plate leaning on the wall fell onto his leg, fracturing it.",1
"An employee was closing a side door of a trailer when another employee was starting up another truck. The truck rolled back and struck the employee in the mid-section pinning him between the truck and the trailer, causing internal injuries.",1
"While treating water in an aboveground tank, an employee became ill from heat exhaustion and was hospitalized.",1
An employee was ratcheting a load on top of a pallet and slipped and fell backwards off the pallet fracturing lumbar vertebrae.,1
An employee was cutting beets with a knife and amputated the tip of the left pinky finger.,0
"At 7:15 pm, on June 30, 2016, an employee was operating a sit-down forklift truck to put product into a dumpster when his left index finger was caught between the fork and the dumpster. His fingertip was amputated above the knuckle, requiring surgery.",1
"An employee was anodizing parts on a polishing machine when the part jerked, breaking the employee's left thumb and pinky finger.",1
"An employee fell while walking up an incline to the building in the parking lot, fracturing ribs and puncturing a lung.",1
An employee was cutting an onion with a knife when the blade amputated his left thumb. Cutting gloves were not worn at the time of the incident.,1
"An employee was operating a commercial grass mower on an incline when the mower began to roll over. To prevent a rollover, he placed his hand onto the mower deck. During the machine's movement, his hand entered the rotating mower blades under the deck, severely lacerating and injuring his right hand. He was hospitalized.",1
"On or about June 30, 2016, an employee fell down the steps in the maintenance building, suffering a back injury.",1
An employee was working in the electric panel of a rotor machine when an arc flash occurred. The employee received burns on both arms and the face. The electric power was not locked out at the time of the incident.,1
An employee was doing concrete formwork when he turned into a coworker who was using a sledgehammer on a stake. The employee's left middle finger was caught and fractured between the sledgehammer and stake.,1
"An employee had to manually place a trash container onto a hydraulic lift to empty the container. After the container was emptied, the employee was placing the lift back into position. As the arm of the lift was being raised, his left hand entered the path of the lift's arm, crushing his left pinky finger. His finger was partially amputated via surgery.",0
"On June 30, 2016, a work crew was preparing to offload an electric utility pole from a trailer to install it into the ground. As they attempted to roll the pole off the trailer, a hook-shaped copper ground on the pole caught and wrapped up the safety vest of the injured employee, causing him to be pulled toward the rolling pole. He tried to free himself, but the pole landed on his lower right leg, breaking his fibula and dislocating his ankle.",1
"An employee was installing a fiberglass grating when he fell off a platform, injuring his head. His harness was not tied off at the time of the incident.",1
"An employee was changing out the retainer on a shear machine when he was struck in the chest by the retainer ring, breaking his sternum.",1
An employee was delivering products from a trailer when he became pinned between a pallet jack and product rack while moving the rack inside the trailer. He suffered a concussion and injured his lower hip and leg.,1
"An employee was setting a piece of casing in a trench when the line-up tab broke, swung off the pipe, struck the employee in the head and chest, and pinned him between the pipe and wall.",1
"An employee was in the dressing room area pulling carts together to take to the front of the store. As she was backing up with the carts, one of the carts got caught on a stool in the shoe department. She got caught in the shopping cart and fell. She was hospitalized for a fractured right hip that required surgery.",1
"An employee was operating an ATV near railroad tracks, looking for signs of foot traffic, when the ATV hit a rock and threw the employee. He was hospitalized with a suspected fractured clavicle.",1
"An employee operating a powered industrial truck drove over an oil spill and lost control. The employee slid and rested against an iron column. The employee's left leg was pinned and fractured between the powered industrial truck and the iron column, requiring hospitalization.",1
"On 7/1/16, at approximately 2:30 PM, an employee experienced shortness of breath while delivering mail, requiring hospitalization for dehydration.",1
"An employee was transferring diesel fuel from the middle tank of a fuel truck to the forward tank using a barrel pump when a fire/explosion occurred. The fire/explosion threw the employee off the tanker to the ground and ignited his clothing, causing second and third degree burns to his body and arms.",1
"An employee was sharpening mower blades when his shirt was caught by the blade-sharpening grinder. His right forearm was cut to the bone, requiring hospitalization.",1
"As an employee was trying to close a gate on a cattle pen, a cow charged the gate, crushing the employee's left middle finger between the cow's head and the gate.  The employee's left middle fingertip was amputated as a result of the injury.",0
"On or about July 01, 2016, an employee tripped over a railing while walking from the warehouse to his work station, breaking seven ribs.",1
An employee was unloading pallets and tripped on a pallet resulting in a broken foot/ankle.,1
"An employee was troubleshooting a pelletizer machine that cuts crystal polystyrene using a knife blade. He made contact with the pelletizer machine blade, amputating his right-hand index fingertip. The machine was unguarded at the time of the incident.",0
"An employee collapsed while making deliveries at a residence due to environmental heat temperatures and hit her head on the ground, requiring hospitalization.",1
"An employee was hooking wire rope slings to a cargo container when one of the slings came loose and struck the employee on the chest. The employee suffered broken ribs, a cracked sternum, and a fractured left ring finger.",1
"An employee was unloading a truck when the dock plate did not extend completely. As the employee pulled it out to extend it, his finger was caught between the plate and the trailer, amputating his fingertip. He was hospitalized overnight.",1
An employee's right hand was crushed and his fingertip was amputated by a rotating fan blade. The fan was unguarded at the time of the incident.,0
"An employee had cleaned up the wood room with a walk-behind track loader and was returning the loader to storage. As he was glancing over his shoulder to make sure the way was clear, his right foot was caught in the left track of the loader, causing him to fall and break his right leg.",1
"On 7/1/16, at approximately 6:30 PM, an employee was helping to pull tubing from a derrick rig. The employee climbed the derrick structure to attach the necessary rigging. As he descended to the working level, his climb assist became caught/wrapped in the gooseneck assembly. He was then pulled into the derrick board, breaking his tibia and dislocating his ankle.",1
"An employee was inspecting a conveyor when his hand was caught in a roller and his arm was pulled into the conveyor, breaking it.",1
An employee suffered an allergic reaction to a wasp sting and was hospitalized.,1
A packaging machine vacuum stopped working. The employee thought the vacuum line was clogged and reached inside the machine with his right hand to unclog it. The fan blade was still rotating and struck his right middle finger resulting in a fingertip amputation.,0
"An employee fell approximately 12 feet from a welded, tubular steel frame scaffold into the bottom of an empty pool, suffering a leg/foot injury.",1
"An employee was cleaning a pasta processing machine when her hand contacted the lower blade, amputating her left ring and middle fingers just above the middle knuckle.",0
An employee was adjusting racking. The grate slipped and smashed a finger resulting in the amputation of a fingertip on the left hand.,0
"On Friday, July 1, 2016, an employee was performing maintenance work when the equipment he was working on suddenly energized and caught his hand inside the machine. His fingertips were medically amputated.",0
"An employee was descending a portable extension ladder when he slipped and fell to the ground below, breaking bones. He was hospitalized and required surgery.",1
"On or about 7/1/16, at approximately 11:30 a.m., an employee was climbing into an articulating boom lift from the horizontal section of a structural steel tube that was 12 feet above the ground when he began to slip. A coworker who was in the lift went to grab the employee and was pulled out of the lift, causing both employees to fall 12 feet to the ground below. The employee was hospitalized overnight for a fractured vertebra. The coworker was not hospitalized.",1
"An employee was helping a customer when she tripped on a floor mat behind the cosmetic counter, striking her head on the counter and lacerating her arm on the cabinet before falling to the floor. She suffered a concussion.",1
An employee was operating a forklift and struck a fixed object resulting in the amputation of part of his foot.,1
"An employee was inside a security guard shack when a generator from a construction company that was performing work at the facility emitted exhaust fumes into the shack. The employee became dizzy and lightheaded, requiring hospitalization for carbon monoxide exposure.",1
"An employee was adjusting a conveyor belt when it caught his hand, amputating the right ring and middle fingertips. The conveyor was in operation at the time of the incident.",1
"An employee was walking up a 4' platform, missed the second from the last step and fell, fracturing his hip.",1
"While carrying a load of pallets on a forklift, an employee struck a column pole, suffering severe head injuries.",1
"An employee had stopped at a rest area and was walking around the front of his vehicle when he was struck by the front/passenger area of his vehicle as it rolled forward and turned to the right. He was pinned between his truck and an adjacent trailer, breaking his pelvis, rupturing his spleen, and injuring his knee.",1
An employee was repairing a garage-type door that was stuck in the open position. The door malfunctioned and a cable had made a loop. His hand was on a railing when the door fell and caught his hand in the loop of the cable. Three of his right-hand fingers were damaged.,0
"On Saturday, July 2, 2016, at approximately 10:35 a.m., an employee was working alone on the inside of an aircraft engine to repair its blades. The employee was attempting to leave the engine compartment when the work mat beneath him slipped, causing him to slide out of the engine compartment. As he slid out of the engine compartment, his foot became tangled in the nearby portable A-frame step-ladder that he used to access that compartment. He then fell about 3 to 4 feet to the adjacent ground level and broke his right hip, requiring hospitalization.",1
"On July 1, 2016, an employee was cleaning up a work area outside in reported temperatures of 97 degrees with a heat index of 105. He began to feel unwell and was hospitalized for dehydration.",1
"An employee was remotely controlling a crane to move concrete barricades in the coil yard. The rebar handle on a concrete barricade failed, causing the crane's chain rigging to whip up, hitting the employee in the hand. The employee suffered a partial amputation of the left ring finger.",0
An employee was pulling mail out of the dock when the gate from an APC cart fell and struck her on the head. She was hospitalized with a head contusion.,1
An employee was operating a tractor to push a pile when the tractor flipped over. The employee was hospitalized and had stitches.,1
An employee walked out carrying a till when she tripped on a cardboard box on the floor.  She fell and broke her left hip.,1
An employee was cleaning equipment when two of the employee's fingers were amputated.,0
"An employee was measuring wind turbine blades on a scaffold when the scaffold hoist malfunctioned, causing the employee to fall approximately 140 feet to the ground and suffer severe body injuries.",1
"An employee was riding a horse on patrol when the horse became spooked and threw the employee, who fell 35 feet down the hillside. The employee suffered head lacerations and broke eight ribs and the sternum.",1
"An employee stopped his truck on the highway to go to the restroom. The employee stepped over the guard rail of the highway and the ground gave way under his feet. He tumbled about 60 yards down the side of the mountain, cracking seven ribs and puncturing a lung.",1
"An employee was attempting to adjust a row of televisions on a metal rack while on a power lift. When he stepped off the lift onto the steel rack, he fell 20 feet to the concrete below, fracturing both arms, contusing his right eye, and lacerating/fracturing his skull/forehead.",1
"An employee slipped in the freezer and fell, breaking her hip.",1
"An employee was cleaning floors with a hot-water hose when the hose burst and sprayed the employee, causing third-degree burns to the employee's left foot and ankle.",1
"An employee was operating a chop saw on an extrusion line when the saw became jammed. As he attempted to clear the jam, the saw amputated his left-hand ring finger. The machine was unguarded at the time.",0
"On July 4, 2016, at 08:35 AM, an employee was struck by a vehicle operating in reverse. The employee suffered two fractured legs.",1
"An employee was struck by a forklift, requiring hospitalization for a left knee laceration.",1
"On July 4, 2016, at 12:00 PM, an employee fell from a 5-foot ladder while she was stocking shelves and hit her head on the floor.",1
"An employee was making metal parts on a spin unit when the employee's right hand was caught between a part and the machine, fracturing it.",1
"An employee was replacing a 40-foot pole and was installing a lightning arrester when the arrester failed, resulting in second degree flash burns to the left side of his face. He was hospitalized.",1
"Two employees were lowering a part from a mast of a ship. As the employees were lowering the part with a pulley and a tagline, the part got caught in something. The injured employee pulled hard on the tagline, cutting the line and the part fell on his right index finger resulting in amputation of the fingertip.",0
"An employee was performing duct work demolition from an extension ladder approximately 15 feet off the ground. The ladder feet slipped and the employee fell from the ladder, which then fell onto the employee. The employee suffered a dislocated shoulder and head/arm lacerations, requiring hospitalization.",1
"An employee and his co-worker were removing a sheet metal air duct fitting from a scissor lift. After removing two of the four bolts, they brought the lift down to the floor to get additional tools. While the co-worker left to get the tools, the employee raised the lift back up to remove the remaining two bolts. The employee then lowered the lift back to the floor to wait on the co-worker. While standing in the lift at the floor level, the employee was struck by the fitting when it came loose and fell, injuring the employee's back and nose and fracturing a vertebra.",1
"An employee fell down a utility pole to the ground, breaking his heel and lacerating his hand. He was hospitalized.",1
"An employee was using an 8-foot ladder to remove a recessed ""can"" for lighting when he lost his balance and fell to the concrete floor, suffering a head injury.",1
"An employee was working on a survey crew and reached to the ground for his bag when a rattlesnake bit him on his left middle finger, requiring hospitalization.",1
"An employee was attempting to lower a concrete piece of manhole onto another section when it fell and landed on the employee. He suffered a broken left clavicle, broken left ribs, and a broken hip.",1
An employee was pushing a cart to collect mail from the collection box when he fainted and hit the left side of his face and his left leg. He suffered a leg cut and eye bleeding.,1
"An employee was walking alongside a forklift when the forklift turned and pinned the employee between it and the wall. He suffered abdominal pain and difficulty breathing, requiring hospitalization.",1
"An employee climbed onto a truck catwalk, tripped over air lines, and fell to the ground. The employee stood up and fell again, and a trailer then ran over the employee, fracturing both of his legs.",1
An employee passed out while preparing trays in the kitchen due to the heat.,1
An employee was setting up for a new print run and was feeling the roller to see if it had enough ink when his right hand was pulled in between the rollers. His right hand and fingers were crushed and fractured.,1
An employee was trying to rig up a well. The employee enabled the clutch and accidently struck the emergency stop button resulting in a kick back and a broken left arm.,1
An employee was installing a tray on a press when his left finger was caught and amputated in the machine's roller.,1
"An employee was running a band saw in automatic mode when the clamp closed on his thumb tip as he attempted to grab a part. When he pulled his thumb tip out, the skin and nail were amputated.",0
"An employee was working in the cockpit of a plane when his hand was crushed by a falling battery, breaking several fingers and requiring surgery.",1
"On 7/5/16, at approximately 8:30 AM, an employee was splashed with muriatic acid as he opened a valve that was positioned above his head. He suffered chemical burns to his face, chest, and arms and was hospitalized.",1
"An employee was using a bucket to fill a rubber mixing machine when the bucket became caught in the machine. The employee tried to pull the bucket out, but the machine pulled the employee's left hand in and crushed it. The machine was not guarded at the time of the incident.",1
"Employees were removing  an old utility pole with a digger derrick. One employee was at the base of the pole, guiding it, when he was shocked by the 19.9k-volts line. He suffered burns throughout his body.",1
"An employee was installing a communication cable when he experienced heat-related illnesses and leg cramps, requiring hospitalization.",1
"An employee was operating a forklift when he hit a pole. His right foot was smashed between the forklift and the pole, fracturing it.",1
"On 07/05/16, at 9:00 p.m., an employee was riding on the forks of a sit-down forklift when he fell from the forks and was run over by the forklift resulting in two fractures to the right foot.",1
An employee was standing on a step stool and missed one of the two steps while dismounting and fell onto their right hip causing a fracture of the right femur requiring surgery.,1
"An employee touched a live wire while installing a 277-volt light fixture, burning his right hand index finger and receiving an electrical shock.",1
"An employee was helping to load a metal part when his right hand was caught between a chain sling and the load, amputating his middle fingertip.",0
An employee was helping a millwright remove a backstop from the grain leg of a silo when the employee's left thumb was partially amputated by a de-energized belt and pulley that moved due to the weight of the product in the cups on top of it.,0
"An employee on a ladder was cutting a 3-inch copper pipe that was filled with 150 psi of nitrogen gas. As he was cutting the pipe's end cap, the pressure of the nitrogen pushed him off the ladder. He fell approximately 6 feet and landed on a nearby table, injuring the back of his body and cutting his left ear.",1
An employee’s finger was partially amputated while he was cutting Formica on a table saw.,0
"While operating a grinding machine, an employee's first finger was pulled into the grinding wheel and amputated.",1
One employee spent the entire morning of 7/5/16 stripping forms off of concrete slabs. He fell over during his lunch break inside of the job trailer. The doctor diagnosed heat stroke and the employee was admitted to the hospital.,1
"An employee was moving a shaker panel with an overhead crane. A separate shaker panel had been leaned vertically on a wooden crate along the walkway. As the employee was operating the overhead crane, the vibration caused the vertical shaker panel to fall over and strike the employee, fracturing the employee's left tibia.",1
"An employee was attempting to cover a stack of lumber with a tarp because it was going to rain when he slipped and fell from the stack, fracturing his pelvis.",1
An employee was collecting trash in a residential neighborhood when he was struck by a car and thrown into the rear hopper of the garbage truck. He suffered lower leg fractures and was hospitalized.,1
"An employee was struck by a self-closing door and fell, suffering a fractured hip.",1
An employee was attempting to remove a roof panel at a construction site when he lost his footing and fell 15 feet through an opening in the roof. He broke both wrists and was hospitalized. Fall protection was worn at the time of the incident.,1
"An employee was lowering the scale box from a Lull when the scale box slid off the Lull and fell on the employee's lower right leg, breaking the employee's femur.",1
"An employee was pulling the sampler attached to a 140-pound hammer out of the ground using the ""cat head"" (a revolving spool that helps raise the hammer) when he was pulled up off the ground and into the cat head by the force of the rope being pulled. He broke his left forearm.",1
An employee was using a jackhammer to break up concrete in the parking lot. The jackhammer bounced up and landed on the employee's left foot causing an open fracture to the second metatarsal and a laceration.,1
"An employee slipped and fell on a wet floor, requiring hospitalization for a shattered knee.",1
"An employee fell approximately 10 feet from the second level while stocking materials, suffering head and back trauma.",1
"An employee felt ill while driving a truck and delivering packages, requiring hospitalization for dehydration.",1
"An employee was power washing an idling pea picker (combine) when a leading length of power wash hose was caught and began wrapping around the picking head of the combine.  A length of the power wash hose dragged on the ground as the leading length uncontrollably wrapped, roping around the employee's right leg from behind and pulling the employee foot-first into the picking head.  The employee's right leg was forcefully pulled into the combine up to the knee, causing multiple fractures and lacerations.",1
"An employee was climbing into the cab of a truck and grabbed the steering wheel. He lost his grip on the wheel, causing him to fall out of the cab and onto the ground. He fractured his left elbow, arm, and hip, requiring surgery.",1
"An employee was working from a bucket truck to install a fuse contact and a lightning arrestor on a wood pole when he made contact with 14.4 kV line, suffering electrical burns to the left and right arms.",1
"An employee was preparing to make a batch when the pressure inside a plugged pipe caused the area around the pipe flange to fail. The chemical (acrylic acid) inside the pipe then splashed the employee's face, burning it.",1
"An employee on a ladder was removing wiring from a junction box in the ceiling while doing demolition. He removed the wires and placed wire nuts on them. The white neutral wire was hanging down. When the employee started to climb down the ladder, he touched the wire with his hand and it shocked him. When he pulled away from the shock, the fast motion broke his scapula.",1
An employee was constructing an electrical test stand when he came into contact with two electrical 800VAC wires. He was shocked and suffered burns on both hands.,1
"An employee had been picking up chip boards weighing 30 pounds for 3 minutes to help with job setup when he began to feel a tingling on the right side of his body, requiring hospitalization.",1
"An employee was walking on a support beam four feet high, lost their footing and fell breaking the pelvis.",1
"An employee was working on a press brake when his right hand became caught between the dies in the machine, injuring his index, middle, and ring fingers on his right hand.",1
"The employee was tracing the power source of the AC unit on the roof and went to the third floor to disconnect the power. He stepped on a plywood piece that came loose, and he and the plywood fell down to the lower level. The impact caused him to tumble from that level to the ground. He was hospitalized with a gash to his head, three fractured neck vertebrae, and left wrist and back trauma.",1
"An employee tripped while operating a glue machine, and the employee's right thumb was caught in the machine rollers. The thumb tip had to be surgically amputated.",1
An employee was about to clean the dishwasher when he slipped on the floor and his foot went into the water tank. He suffered hot water burns to his foot.,1
"An employee was installing exterior walls to a back patio storage unit. He was nailing the top sill plate with a nail gun when the gun bounced and swung down, hitting his left leg. His finger was still on the trigger, and the gun fired a nail into his leg.",1
"On or about July 6, 2016, an employee fell backwards while either getting on or getting off a chair/stool at the counter. She hit her head on an unknown object and was hospitalized.",1
An employee became dizzy and suffered heat exhaustion while installing a sign.,1
"On or about 7/6/16, at 17:45 hours, an employee had been working outside at several oilfield locations in high heat conditions when he began feeling ill and collapsed. He was hospitalized for heat exhaustion.",1
"At approximately 5:07 p.m., on 7/6/16, an employee tripped on the floor threshold near the window area vault and fell, dislocating the left elbow and fracturing the left forearm. The employee was hospitalized.",1
"While working outside and pouring concrete into forms, an employee felt sick and experienced nausea due to heat stress/exhaustion.",1
An employee was delivering packages when he started cramping and feeling ill due to heat exhaustion.,1
"An employee was working on a tool pack that was de-energized when the top of the tool pack (weighing approximately 40 pounds) shifted and came down on his left middle finger, crushing and amputating it.",0
"At 7:00 PM on July 6, 2016, at the truck docks, an employee was lifting a plastic 55-gallon drum onto a skid when the drum fell onto his right thumb. His right thumb was crushed, requiring surgery and overnight hospitalization.",1
An employee was attempting to unjam a machine when the machine crushed the fingers on his left hand.,1
An employee was attempting to help the mill operator start a strip of sticky rubber on the take-off belt when his left index finger came into contact with the mill knives and was amputated behind the nail bed in front of the first knuckle.,0
An employee's right pinky finger was caught and amputated in the closing mechanism of a door as he pulled it shut.,0
An employee was using a sandblaster when the top third of the employee's right ring finger was amputated by the sand blaster's belt and pulley.,0
"An employee suffered a severe allergic reaction while cleaning up a fire extinguisher discharge, requiring hospitalization.",1
An employee sustained a partial amputation of the left thumb while operating a hydraulic crimper.,0
An employee was on the pool deck demonstrating a move for students during a water aerobics class when she slipped on the tile floor and fell fracturing her right hip.,1
"An employee was flagging traffic on the west side of a jobsite on the east-bound lane. He was standing behind the cones in the lane ahead of the trucks that had flashers on. The other flagger had just changed from the ""slow"" to the ""stop"" position for traffic to let cars pass from west toward the east.  As the employee released from ""stop"" to ""slow"" for traffic going east, a car struck him. He suffered two fractures to his lower legs, a broken clavicle, broken ribs on his right side. and an abrasion to the back of his head.",1
"An employee activated a gate with his left hand while his right hand was still on product. His right thumb then became caught between the gate and the product. When he pulled his hand back, his right thumb tip was amputated.",0
"An employee was standing and building HV fans by hand. He was bolting parts onto the fan with a wrench. Around 9 a.m., he started throwing up and felt ill. He was hospitalized due to possible heat stress.",1
"An employee was removing a pipe fitting when a valve opened and released pressurized anhydrous ammonia, causing chemical burns to the employee's face, chest, and arms.",1
An employee was helping to erect a tower when a 4-pound bolt fell down the center of the tower and struck the employee's head.,1
An employee suffered from heat exhaustion while dismantling trucks.,1
An employee was preparing to pick up a load when the employee lost consciousness from exposure to excessive heat.,1
An employee was carrying a piece of sheet metal with a coworker when the metal slipped and severely lacerated the employee's right arm.,1
An employee was walking on the cord of the roof trusses taking measurements inside the roof trusses when he stepped on a weakened area and fell approximately 10 feet to the concrete floor below breaking the L1 vertebrae and other bones.,1
"An employee fell approximately 24 feet from a guard tower when a rope snapped during an obstacle exercise, breaking his femur and fracturing his pelvis.",1
An employee was climbing down a ladder when he fell from the last rung. He landed on a tape measure and cracked his right femur bone.,1
An employee was hospitalized for heat exhaustion.,1
"An employee was performing an air check on a robot in the clear coat booth in the paint shop. He received an electrical shock to his left hand while removing a metal cover, resulting in hospitalization due to internal injures.",1
"While delivering mail on a walking route, an employee felt ill, vomited, and collapsed due to possible heat-related illness.",1
"An employee was cleaning out chunks of wet PVC resin from the side of a mixing machine. While he was attempting to remove the bolted-on steel plate, the plate (which was under pressure) blew out and struck the employee on the right hand and dorsal forearm. He sustained three broken fingers on his right hand, a torn-off fingernail, and lacerations to his right thumb and left dorsal forearm.",1
"An employee was working from a ladder installed on the top of a scaffolding system when the ladder and scaffolding pushed away from the wall, causing the employee to fall approximately 20 feet. The employee suffered a broken neck and a concussion.",1
"An employee was attempting to move a pump from an empty drum to a full drum. Once the metal cap was loosened, the pressure blew the cap into his face, breaking his nose and orbital socket and lacerating his eyelids.",1
An employee tripped on a computer cord and fell fracturing the right hip.,1
"An employee was operating a manual lathe in the tool room when a metal stringer caught the employee's right hand and pulled it toward the metal on the lathe. The employee suffered deep lacerations to two fingers, requiring hospitalization and surgery.",1
"While changing a street light, an employee contacted the electrical filament and suffered an electrical shock. He was knocked unconscious and required hospitalization.",1
"An employee was directing and parking an incoming aircraft. While on headsets communicating with the cockpit, the employee walked backwards into a moving jet bridge. The jet bridge struck the employee's right ankle, breaking it and requiring surgery.",1
An employee was hospitalized and treated for heat exhaustion.,1
"On or about July 7, 2016, at 2:30 a.m., an employee amputated the middle and ring fingers on his left hand while installing a cassette unit into a press.",0
"On July 7, 2016, at 2:30 p.m., an employee fell 35 to 40 feet when a limb broke while he was descending a rope supported by the limb. He was hospitalized.",1
An employee was hospitalized following second degree burns to right hand and fingers resulting from an arc flash that occurred while replacing the cover on an electrical control panel.,1
"An employee experienced leg pain and dizziness after a long-distance haul and light to moderate work at an outdoor single-family home construction site. He then sat in an air-conditioned truck. When he attempted to exit the truck, he fell onto the hard ground and suffered a skull fracture.",1
"On 7/7/16, around 1:00 p.m., an employee started grabbing his hamstring and experienced cramping. He later felt unwell. He was eventually hospitalized for dehydration.",1
"A maintenance employee was replacing a guard when the guard slipped. The corner of the guard caught the belt and pulled in his hand, amputating his right index fingertip. The machine was not shut down at the time of the incident.",0
"An employee was standing on a fuel island and climbing into a truck when he missed the grab handle and fell, breaking his tibia.",1
"On or about July 7, 2016, at 5:00 p.m., an employee fell down the marble staircase as she was leaving for the day. She was hospitalized with a lacerated bottom lip, loose teeth, dislocated right elbow, fractured right ulna and radius, concussion, and multiple bruises.",1
"While walking around the cash register, an employee tripped over a hand basket on the floor and suffered a left hip fracture.",1
"An employee was driving to the dock to park a walkie rider at the charger when he blacked out. He fell from the walkie rider, hit his head on the concrete floor and suffered a head fracture, requiring hospitalization.",1
"An employee was operating a high-reach stand-up forklift. When he lost control of the lift and stuck his foot out to control the impact, his left foot was pinched between the lift truck and a pallet, breaking bones.",1
"An employee was in the bucket getting ready to go up to do work on the powerline when he contacted the energized line, suffering third degree burns to both arms and second degree burns to his hands.",1
A door-to-door package delivery driver was hospitalized for heat-related issues.,1
An employee slipped on the weather deck of a docked vessel and suffered a left shoulder/arm injury.,1
An employee was getting a cup of coffee when she tripped over a mat in the lunchroom and broke her left femur. She was hospitalized.,1
"An employee was preparing to begin work and was riding in an aerial lift at low elevation when he was catapulted from the aerial lift and hit the pavement, fracturing his right ankle.",1
"An employee was straightening bricks on a jig for the shipping monorail. As the strapping machine on the monorail rotated, the employee's head was caught between the jig and the machine, fracturing her jaw.",1
"An employee was installing windows from a scaffold three stories high when he fell and suffered head trauma, requiring hospitalization.",1
"An employee was lashing up on the pedestal of a ship when he felt faint. As he was descending the ladder, he fell from the second rung and hit his head. He was hospitalized.",1
"An employee fell while ascending an extension ladder, sustaining a head fracture that required hospitalization.",1
"On July 7, 2016, at 0930, an employee was reaching into the strap station and jig of the brick strapping machine to straighten up the stack of bricks before they were banded. At the same time, the operator activated the machine, causing the carousel of jigs to move forward. She was pulled into the machinery, crushing her upper torso and head between the jig and the strap station.",1
An employee was loading brackets into the feeder of a bracket welder machine when the machine amputated the employee's right middle fingertip. The machine was in operation at the time of the incident.,0
"An employee was walking when he fell and struck his knee. He then continued to fall, striking and fracturing his right cheek on a concrete support base.",1
"An employee was loading and adjusting a spindle that contained a wooden spool when the spindle became unbalanced and the industrial wooden spool fell on the employee's right ring finger, partially amputating it before the first knuckle.",0
An employee was jogging a bag machine when he injured his fingertip on the blade.,1
Two employees were loading a port-a-potty onto the pickup truck. One employee pushed a port-a-potty causing the second employee to fall and strike their head on the ground. The injured employee was hospitalized for a head injury requiring four stitches and a possible concussion.,1
"On July 8, 2016, at approximately 1:15 PM, an employee was bending pieces of metal in a pneumatic parts bender. When he attempted to remove a part from the machine, the pneumatic bending piston crushed and amputated his right index fingertip just below the nail.",0
"While cutting wood on a table saw, an employee sustained a laceration from the left index fingertip down to the palm of the hand, requiring hospitalization.",1
An employee working on the heating/air-conditioning unit on a roof fell approximately 10 feet to the ground below. He injured his back and was hospitalized.,1
"On July 8, 2016, at 1:30 p.m., an employee was operating a table saw to rip pieces of wood when the employee's left thumb contacted the blade and was amputated.",0
"An employee was installing an air conditioner when he fell approximately 30 feet, suffering a fracture.",1
"An employee was shocked while modifying a lighting circuit, burning his hands and causing a right index finger amputation.",1
An employee was brushing metal chips off a horizontal band saw when the saw blade amputated his index finger. The band saw was partially guarded and running at the time of the incident.,1
"An employee was evaluating a machine operation as it pertained to the air pressure pushing plastic molded parts out of the tool and dropping them into the container below. He was standing on top of the machine looking down into the tool area as it opened and closed when he saw that the plastic molded part was hung up in the tool. When he attempted to remove the stuck part, the machine cycled and caught his hand between two tool sections, crushing his right hand and fingers.",1
"An employee was installing light fixtures when he came in contact with live electrical wires and sustained a shock. He then fell approximately 14 feet from a 16-foot ladder, breaking his ankle and requiring surgery.",1
An employee amputated their right index finger on the staple machine.,0
"An employee working in the pipe yard felt discomfort and started cramping. He decided to take a break, but his legs buckled and he collapsed to the ground. He was hospitalized with a heat-related illness.",1
An employee was exiting a trailer when he tripped and fell on the ramp. His right ring finger was caught and amputated in the metal grate opening.,0
"While setting up a 50-inch press, an employee's hand was caught in the rollers.",1
"An employee slipped and fell approximately 3 feet off a piece of equipment, breaking a leg and requiring surgery.",1
An employee was cleaning up at the end of his shift when he became dehydrated.,1
"An employee was performing vertical casting activities when he felt overheated and experienced cramping, dizziness, and nausea. He was hospitalized with heat exhaustion.",1
An employee was preparing to perform a walk-around survey of the site for future removal of the walkway structure along the water's edge. He crossed a set of concrete barriers placed on location when his right foot broke through the upper capping metal surface of the walkway area. He injured his right ankle and required surgery.,1
"An employee was attempting to remove a hose reel basket from a mat that was sitting on a trailer. When the employee went around to put a pin on the trailer to prevent the mat from falling off, the operator pushed on the load, catching the employee's fingers between the mat and pin. The employee's middle finger was amputated to the middle knuckle, and his ring finger was totally amputated.",1
"An employee was on a standup forklift when his left foot became pinned between the equipment and a guardrail, fracturing it.",1
"An employee unplugged a pallet jack at the charging station. The employee was riding the pallet jack when it jerked, causing her to fall off. Her right foot then became caught and was crushed beneath the pallet jack, requiring hospitalization.",1
An employee was operating a standup tram that tows mail carts when the employee's right pinky finger was caught between a tow bar and the connection area. The fingertip had to be surgically amputated at the first joint.,0
"An employee fell in the kitchen and broke her femur, requiring hospitalization.",1
An employee was hospitalized for dehydration.,1
"While standing on a loading dock to the side of a forklift, an employee was bumped by another forklift, fell down, and sustained a deep laceration to his left leg below the knee, requiring stitches.",1
An employee was driving a truck and delivering packages door to door when he experienced a heat-related illness and required hospitalization.,1
"An employee was on a beam helping coworkers remove wire from a cable tray when he fell to the floor, cutting his forehead and breaking his right hand, left-hand finger, and nose. He was wearing a safety harness but was not tied off at the time of the incident.",1
"An employee was directing a front-end loader hauling material on a construction site when the front-end loader ran over the employee's toe, crushing it and requiring surgery.",1
"An employee was crushed between hay bales being loaded into a semi-truck trailer, rupturing his small intestine and crushing his pelvis and shoulder.",1
An employee's right index finger was amputated when a roll of wrapping plastic fell on his hand while he attempted to load the roll onto the wrapping machine.,0
"An employee was closing an iron entrance/exit gate to the property. While the employee was sliding the iron gate to a close, the safety mechanism that prevents the iron gate from derailing broke from the support column.  At this time, the iron gate derailed and fell on the employee, fracturing her left collarbone and left wrist. She required hospitalization and surgery.",1
"An employee ran a line from a pole to a resident's house and began to mount a wall box. When he lifted the drill above shoulder level, he experienced a cramp and became weak and nauseated. He was hospitalized.",1
"An employee stepped off the back of a truck bed and slipped, breaking his left foot.",1
"An employee was walking outside when his leg gave way and he fell, breaking his left leg and requiring hospitalization/surgery.",1
"An employee was setting a bushing when the assembly began to fall. He attempted to catch the assembly to prevent it from falling and in the process caught his right middle finger between the assembly and the rig floor, amputating the finger.",0
"An employee and a coworker were manually re-installing a conveyor belt chain. The coworker was using a come-along to pull the chain when the chain jumped and pinched the employee's left pinky finger, partially amputating the fingertip.",0
An employee was helping to set elevators and was also taking trash outside when he became dizzy and nauseated. He was hospitalized for dehydration from heat stress.,1
"An employee working on an HVAC unit fell 10 feet when the platform the unit was on collapsed. The employee suffered a fractured shoulder, three broken ribs, a fractured pelvis, and a collapsed lung.",1
"An employee was unloading instruments on the top shelf of the dock storage rack. As he was climbing down the rack, he fell to the ground level below, fracturing his skull, clavicle, and vertebrae.",1
An employee suffered a head injury and was hospitalized.,1
"An employee lost control of a forklift, ran into the dock door rail protector, and smashed his left foot.",1
"An employee experienced heat stress symptoms after performing jobsite cleanup, requiring hospitalization for acute kidney injuries and dehydration.",1
"An employee was backing up a dump truck trailer to discharge the load of clay gravel fill when the truck tipped over on its side. He was slammed against the shift stick and steering wheel, breaking rib and back bones and hematomas on his legs. He required surgery.",1
"While reloading the stock on the plastic film winding machine, an employee's hands were caught in the in-going nip point, requiring hospitalization.",1
"An employee experienced heat stress while working on a tempering line for glass production, requiring hospitalization.",1
"An employee was standing outside of the restroom when his hand was placed in or near the door jam as a coworker opened the door from the inside. The employee's hand was pinned between the side of the door and the door jam, partially amputating the left ring finger from the mid-nail.",0
"An employee was rouging corn in a field when he lost consciousness due to heat stress. He suffered burns to his legs and hands from direct sun exposure, requiring hospitalization.",1
An employee was working in the fabrication shop when a transformer across the street from the shop exploded. The employee was struck by fragments from the transformer and received lacerations to his face and left arm.,1
"An employee was walking up stairs and fell, injuring her face, head, right forearm and right knee.",1
"On 7/8/2016, an employee was trying to repair a conveyor when the right hand was caught in the conveyor belt resulting in amputation of the pointer fingertip.",0
An employee was collecting trash when the compactor pinched and amputated his left little finger.,0
A forklift operator suffered heat stroke while working at the MDF plant.,1
An employee was delivering mail when a dog came from behind and bit him in the left ankle and left palm.,1
"An employee was grinding on a shaft while turning on a lathe when the shaft started wobbling, came out of the lathe, and struck the employee's forehead, cracking the skull.",1
An employee was hospitalized after being bitten by a cat while cleaning cat cates.,1
"An employee tripped over roofing materials while walking and fell to the ground, injuring a wrist.",1
"An employee removed a fuel gauge sending unit to access the fuel tank and remove old fuel. After removing the old fuel and adding new fuel to the tank, the employee replaced the fuel gauge sending unit. In this process, he found one of the electrical connectors was damaged and needed to be replaced. He replaced the connector and used a butane torch to shrink the heat-shrink tubing used to protect the connector. The flame from the butane torch ignited the vapors from the fuel and a flash fire occurred, burning the employee's face, arms, chest, leg, and stomach.",1
"On or about July 9, 2016, at approximately 8:50 a.m., a patient attacked an employee. The employee was hospitalized with an orbital fracture, lacerations to the face, and a fractured nose.",1
An employee moving store merchandise suffered a foot injury and was hospitalized.,1
An employee was constructing a flatbed trailer for a heavy haul when he felt lightheaded and started cramping due to heat exhaustion.,1
"On or about July 9, 2016, at 10:30 a.m., an employee was either descending a ladder or getting trash off a scaffold when he lost his balance and fell approximately 12 feet into a pit. He was hospitalized with three broken ribs, a fractured skull, and a laceration to his lungs.",1
"An employee was moving a setting tool from the tool stand to a vise located on the back bumper of the logging unit to make some adjustments on the tool. As he was attempting to place the setting tool onto the vise, the setting tool struck the vise, causing the tool to slide down from the employee's hand. His finger slipped into a hole on the tool and a sleeve on the tool came down, pinching his left middle finger.",1
"On July 9, 2016, at approximately 12:00PM, an employee had a seizure while standing on the upright rider collection truck. He fell off the moving vehicle and sustained a skull fracture. The employee was hospitalized.",1
An employee and three associates were putting together a sheeter machine that makes tortillas chips when the machine rollers broke the three middle fingers on the employee's right hand. He was hospitalized. The machine was not locked out/tagged out at the time of the incident.,1
"An employee was installing a tongue and groove wooden ceiling from a scaffold when he fell off, fracturing his arm and wrist and requiring surgery.",1
An employee was not feeling well and she was hospitalized.,1
An employee was disassembling the stator on an extruder machine when several of the employee's fingers on both hands were pinched and burned between two hot steel plates.,1
"An employee was troubleshooting the power source for equipment when an arc flash occurred, burning the employee's upper extremities and causing facial abrasions.",1
"An employee was carrying a water form roller down three steps on the back side of a press when he slipped and started to fall. He tried to catch the roller, and his right-hand pinky finger was caught between the roller and stair, amputating the fingertip.",0
"An employee was lighting a vessel's pilot when the vessel exploded and struck the employee, causing multiple lacerations to the employee's head and face and multiple fractures to the wrist, shoulder, ribs, and clavicle.",1
"An employee was checking power lines using an extend stick when he stepped into a hole and suffered tendon damage in his left knee, requiring hospitalization.",1
"An employee fell from the top of a tanker truck to the ground, breaking an ankle.",1
An employee folded up a table in the conference room and tried to move it when she felt a pop in her lower back.,1
"On or about July 11, 2016, an employee was braking a part at a 45-degree angle when the part came up and partially amputated the employee's thumb. The employee's other thumb was lacerated.",0
An employee suffered a left middle fingertip amputation while operating the loader machine.,0
"An employee was adjusting a plastic pallet and a wood pallet when his left index finger was caught between the two, partially amputating his fingertip.",1
An employee was laying down rods that were being removed from an oil well when he began to feel fatigued and lightheaded before collapsing to his knees.,1
"While removing asphalt shingles near the chimney area on a pitched, single-story residential roof approximately 8 feet high, an employee became unstable and slipped, falling to the grass-covered ground area. He broke his leg and hip.",1
An employee standing at floor level fell backwards and hit his head. He was hospitalized.,1
An employee was slicing meat with a hand-held knife when the blade amputated his left middle fingertip.,0
An employee was working outside on a 300 HP pump beneath a canopy when he began to feel unwell. He was hospitalized with dehydration.,1
An employee was working at the diaphragm crimper when his finger was caught in the point of operation. His right middle fingertip was pinched and had to be amputated.,0
"An employee was installing a new belt and pulley when the belt and pulley rotated, amputating the employee's left little fingertip.",0
"An employee was placing blocking between the rafters when he stepped wrong and fell from an approximate height of 16 feet to the dirt below, breaking his femur, tibia, and two vertebrae.",1
"An employee was operating a pallet jack when his foot became lodged between a door jam and the pallet jack, severing his right pinky toe.",1
An employee was hospitalized due to dehydration.,1
An employee was using a band saw to cut curry chicken (small chicken with bone) when his right index finger contacted the blade and was lacerated. He was hospitalized for surgery.,1
An employee attempted to remove a box that was stuck in a machine when it dislodged and fell on the employee's right forearm.,1
An employee suffered heat-related illness while doing landscaping work and was hospitalized.,1
"An employee was working on an industrial fan when the fan electrically shocked him. He then fell to the floor and the fan fell on top of him, causing fractures.",1
"An employee was working on an excavator while on a catwalk. He then attempted to get off the excavator by holding onto the rail, which was unbolted from previous maintenance work. The rail came loose, and he fell from excavator, fracturing his lower left leg.",1
"While he was attempting to clear a jam, an employee's hand slipped into the pneumatic valve, resulting in a fractured thumb.",1
"An employee was performing work on the conveyer system of the ""butterfly"" machine. The employee's left-hand ring finger was caught in the chain drive, amputating the fingertip.",0
"An employee was performing maintenance on the conveyor of the ""butterfly"" machine when the chain drive activated and caught his left ring finger, amputating the fingertip to the first knuckle. The machine was not locked out at the time of the incident.",0
"An employee fell about 20 feet from a ladder to the ground while drilling into a wood stud, suffering a broken nose and ankle.",1
"On July 11, 2016, an employee was sorting merchandise and lost consciousness. He fell and struck his head on a table, fracturing his eye socket. He was hospitalized.",1
"An employee fell from a ladder to the concrete floor below, fracturing his left leg and requiring surgery.",1
An employee was seriously burned while using a torch to cut scrap.,1
"An employee was cutting grass with a 52"" stand-on mower. While cutting on a side hill and moving around a pole, the mower started to go downhill. The employee dismounted the mower, and the blade caught and severely lacerated his right foot.",1
"An employee was taking down a crane when he slipped and fell 14 feet off the crane to the ground, suffering facial scratches and fracturing both hands and his left elbow.",1
"An employee was standing on a slump stand about to add water to a tank when the slump stand collapsed and the employee fell approximately 8 feet to the ground, suffering a dislocated shoulder and laceration.",1
"An employee was removing a paper jam from an F-27 File Folder Single Lane Machine while operating it in jog mode. His left ring and middle fingers were caught in a roller, resulting in the loss of the fingertip pad on the ring finger.",0
An employee was climbing down the scaffold ladder and fell. The employee was hospitalized with fractured ribs and a spinal cord injury.,1
"An employee fell backwards from a truck and struck his head on the concrete, suffering a possible concussion.",1
"On or about 7/11/16, an employee was moving four pieces of metal weighing about 84 pounds. He hand-carried the metal to a truck bed and set it down on his pinky finger. When he attempted to pull his finger out, he suffered a deep avulsion. His fingertip had to be surgically amputated.",0
"While working on a truck, an employee was struck in the face by a pry bar, suffering a laceration to the left cheek and eye.",1
An employee was helping to adjust a row boat line when the employee's left ring finger was caught/amputated at the second digit between the rope and a cleat of the float dock.,0
"An employee was helping to position a 'cage' form into a caisson for concrete. A 2x4 that was part of the rigging came loose and hit the employee in the face, causing multiple facial fractures that required hospitalization.",1
"An employee was walking around a customer's establishment looking for a floor mat that was to be cleaned when the employee tripped over a duffel bag and fell to the floor, suffering a fractured hip.",1
"An employee was carrying a box when she tripped on her own feet and fell to the floor, breaking her left wrist.",1
"An employee was approaching an injection molding machine when she tripped and fell from the floor level onto a conveyor, suffering a large hematoma to her upper left leg.",1
An employee was loading metal into a pot and sustained a hernia requiring surgery and hospitalization.,1
"On July 12, 2016, at approximately 1:45 p.m., an employee was attempting to remove a stairway from a 100-barrel tank that was also being prepped for removal. The stairway was held to a platform by two bolts. Standing on the ground, the employee removed one bolt, which allowed the stairway to swing towards the tank. The employee was pinned between the tank and the stairway, suffering a collapsed left lung, contusion to the back and right shoulder, and friction burn to the trunk and right ear. The employee was hospitalized.",1
An employee was conducting maintenance on a belt conveyor. The employee's right-hand middle finger was amputated while the employee disassembled the baggage tug.,1
"An employee was spotting for a forklift driver who was attempting to lift a steel I-beam. The employee was standing on the opposite side of the I-beam pile from the forklift. When the driver began to lift the I-beam, the pile shifted. 
One of the-I beams rolled down and landed on the employee's ankle, breaking it in several places.",1
"The injured employee and a second employee were laying a walkway on its side when the employee's foot slipped on some rock and the walkway fell onto the employee's leg, breaking his tibia.",1
"An employee received an electric shock when she went to turn off the air conditioner in the day room, suffering a burning feeling in her chest and pain in her right arm and leg.",1
An employee fell through a safety rail at a height of 18-20 feet injuring their back and feet.,1
An employee went to the hospital with a potential heat related illness.,1
An employee was hospitalized with two broken legs after the ram of a press brake he was cleaning fell on top of him.,1
"While lifting milk products in the back of a vehicle, an employee felt a pop and was hospitalized with a sprain.",1
"An employee removed a tap from a brine tank containing cold water (8-10 degrees). The brine liquid burned the employee's right hand, palm, and forearm. The employee was admitted to the hospital burn unit.",1
"An employee was helping a forging hammer operator and was attempting to release a part lodged inside the hammer. The employee's hand tool became caught inside the point of operation and broke when the machine cycled. A piece of the hand tool ejected and struck the employee, breaking bones and lacerating the employee's leg. The employee was hospitalized for surgery.",1
"After working on the ground and gathering materials for the lineman, an employee became ill and started vomiting due to dehydration and heat cramps. The employee was hospitalized with heat-related illness.",1
"An employee operating a forklift retrieved a pallet from the metal rack in the meat department. There were two pallets on the rack; one pallet was leaning on the other. When the employee placed one pallet on the floor, he exited his forklift to check the load. Fifteen to 20 small boxes from the pallet on the rack then fell and struck the employee, fracturing his left leg below the knee and three toes on his left foot.",1
"An employee was throwing glass into the rework hopper when the glass slipped out of his hand and contacted his neck, lacerating it and requiring hospitalization.",1
"An employee was admitted for in-patient hospitalization on July 12, 2016, due to heat exhaustion.",1
"An employee went to adjust the load on a forklift when the load fell on the employee's foot, causing a contusion.",1
An employee was performing framework in high temperatures and was hospitalized for dehydration.,1
"An employee was removing a tire from a forklift. While removing the tire from the split rim, the employee removed all of the split rim bolts. When the tire was inflated, the split rim separated and struck the employee in the left side of his head, face, and jaw. He suffered lacerations that required surgery.",1
"An employee was hauling metal roof panels on a flat roof when he fell 20 feet through the roof to the building's floor, shattering his pelvis and fracturing his jaw, right elbow, right wrist, and left femur. He was hospitalized.",1
Employees were loading a skid steer when the operator of the machine lost control and jumped clear from the operator's station. The injured employee attempted to get to the controls to stop the machine when he suffered lacerations and a fracture to his right foot.,1
"An employee was heating up a track frame pin with a torch. While the employee was removing the track frame pin, a hot bolt or part of the frame pin punctured an adjacent aerosol can of brake cleaner and the contents ignited into a ball of fame, causing thermal burns to the employee's lower left and right arms and face.",1
"An employee connected a compressed air connection to fill the compressed air tank when the tank burst. The employee was struck by flying debris, suffering facial injuries and abdominal pain.",1
"Employees were working on a wheel loader when the bucket fell off and struck an employee's left ankle, breaking it and requiring surgery.",1
"On July 12, 2016, an employee was offloading a 2-yard dumpster when the employee's finger became caught between the truck and the container lock. The employee suffered a fingertip amputation.",0
An employee was injured when he lost control of the ATV he was driving and crashed into a tree while transporting trash to its disposal. The employee sustained a fractured left rib and punctured left lung.,1
A dump truck driver was preparing to dump a load of dirt. The bed of the truck struck an overhead power line. The driver received an electrical shock when he exited the truck.,1
"On or about July 12, 2016, an employee was hospitalized after receiving a severe laceration to the left armpit from a dragon saw. As the employee went to set the dragon saw onto the ground with one hand, the saw was activated and jumped striking the employee under  the arm.",1
"An employee was moving a transformer that was on a hand dolly. The employee  tilted the dolly back so that he could move it and it fell over and struck the employee in the right ankle, breaking it.",1
An employee picked up carpet from a carpet cutting machine. The machine was still running and his ring finger got caught on the tip of the blade. The employee was wearing gloves when his finger was struck by the blade resulting in a partial amputation of the right ring finger.,0
An employee fainted at work and hit his head on the floor.,1
"While traveling on a forklift in the warehouse, an employee scraped against a concrete and metal pillar. The employee's foot was pinched between the forklift and metal pillar.",1
An employee was hospitalized after being struck by a transfer beam that kicked out and struck him in the abdomen resulting in a broken rib and punctured lung on the right side.,1
"On or about July 12, 2016, an employee was using a nail gun to install wood blocking. The nail gun discharged and the nail struck the employee in the stomach area.",1
"An employee was working from a 10 foot step ladder on an overhead register vent. As the employee went to pull down the register, he fell backwards about 5 feet to the floor below and fractured his right ankle. The employee required surgery to his ankle and was admitted to the hospital.",1
An employee was operating a road shouldering grader while doing road work and experienced dizziness and numbness in his arms. He was later hospitalized.,1
An employee's fingertip was amputated when a drill rig bucket fell on his finger.,0
"On or about July 12, 2016, an employee was attaching two trailers together and crushed their left pinky finger between a dolly and a truck trailer resulting in amputation of the left pinky finger.",0
"An employee was using a chop saw to cut a granite curb. When he set the saw down, the blade was still rotating and made contact with the curb. The saw then kicked back and struck the employee in the right shoulder and forearm, slicing his skin.",1
An employee fell from a 6-foot ladder and suffered a fractured leg.,1
An employee fell out of their chair and damaged their artificial hip.,1
"While in the yard, an employee climbed on top of a truck to level off a load of coal, lost his balance and fell off. The employee was hospitalized for a contusion and hematoma on the right hip.",1
An employee was fixing a link on a track. The track pads shifted and pinched the employee's left pinky finger. The finger was later amputated.,0
An employee was riding a walking stacker. His right foot slipped off the walking stacker and was caught between it and a pallet resulting in a broken right tibia and fibula.,1
"An employee fell down a flight of stairs, breaking her ankle.",1
An employee was inside a grain bin sweeping down rice when his leg was caught in the operating sweep auger. He sustained severe leg wound injuries that required surgery.,1
An employee was departing through the front entryway when the automatic door struck the employee. The employee fell and injured their left hip requiring surgery.,1
"The employee was attempting to remove a pin from a tube that is part of a dump truck's lifting mechanism with an air chisel. The pin shot out at him, striking him in the stomach area. The pin is approximately 2 inches in diameter. It did not pierce the skin, but caused bruising/internal injury.",1
An employee was installing sod and began to feel unwell. He was admitted to the hospital and treated for dehydration.,1
An employee was installing wood bracing on the trusses. A gust of wind knocked over the trusses which caused the employee to fall approximately 16' to the ground resulting in a sprained left ankle and a fractured L6 vertebrae.,1
An employee on his mail delivery route was showing signs of dehydration and was taken to the hospital. The employee was admitted for further evaluation.,1
"An employee was digging up the irrigation piping system because it was not working and was planning on troubleshooting the system. While he was digging, he felt dizzy, got cold chills, and then sat down and drank water to cool down. When he stood up, he began to vomit and required hospitalization for dehydration. The temperature and percent relative humidity at the time of the incident was 89 degrees and 59%, respectively.",1
An employee was hospitalized after exhibiting symptoms of heat stress during a pipeline certification course.,1
The employee was inspecting a parked mobile excavator. Dirt in the bucket of the boom arm fell out and struck the employee's left leg dislocating the knee.,1
An employee was participating in a team building event and fractured their right leg.,1
An employee was working a trouble call for a low wire. He was working off a 25 foot pole when it broke and fell over. The employee fell to the ground while tied off to the pole and suffered a fracture in the upper left arm above the elbow and a hip fracture.,1
"On or about July 13, 2016, an employee was hospitalized with a heat illness. ",1
An employee was hospitalized for a possible concussion after falling from a two story roof while stocking shingles.,1
An employee was walking to a meeting when she slipped on a dry erase marker that was on the floor and broke her leg.,1
An employee was struck by a forklift truck that was moving a tote of fertilizer on a wooden pallet resulting in a left leg fracture.,1
"An employee was bitten while grooming a dog, resulting in a puncture wound on the hand.",1
An employee was adjusting the belt and pulley on a lawn mower when his middle fingertip was amputated.,1
An employee slipped on a puddle of water in the main lobby and suffered a knee injury.,1
An employee amputated the tip of their right index finger and their middle finger when they were caught between a casting and a machine apron while trying to remove the casting from the machine.,0
"An employee was walking, tripped on a shoe lace, and fell fracturing the right hip.",1
An employee was hospitalized after a horse kicked him in the chest.,1
An employee was working on the 102-2 envelope machine while it was running. The employee was loosening a bolt with a wrench when the wrench slipped and the employee's right hand entered the machine's scoring section that includes a shaft and two blades. The blades amputated the employee's right index finger to the middle phalanx.,0
An employee amputated a hand while operating a cement delivery vehicle.,1
An employee was operating a trackhoe where acid waste was undergoing treatment in a stabilization tank. The operator became unconscious after being exposed to hydrogen sulfide generated from the stabilization tank.,1
An employee was changing the end tape in a bundler machine and the employee's hand was in the path of the product. The product pushed his hand into the wall resulting in a partial amputation of his right middle finger.,0
An employee felt light headed and fainted.,1
"An employee was assembling/testing an automated two-inch ball valve actuator. He put his finger in for alignment and released the air and his left middle finger was partially amputated (partial bone, on the tip of the finger).",0
The employee was cutting a tree limb with a chain saw when the tree limb contacted the saw and the saw contacted the employee's arm causing injury to the left arm.,1
"An employee fell backwards while mopping the floor, hitting her head and blacking out. She was hospitalized with a head injury.",1
"An employee was squatting down adjusting inventories on lower shelves while a coworker was stocking yeti ice chests approximately 16 feet above the injured employee. The yeti ice chests were in cardboard boxes and  weighed about 45lbs. The coworker lost their grip on one of the yeti boxes and it fell onto the injured employee knocking her into the shelving and then onto the floor. The injured employee passed out, and sustained a laceration on her left temple. She also suffered a broken right ankle and sustained injuries to her back. The injured employee was hospitalized.",1
"An employee fell a distance of approximately twenty feet while performing concrete work on a pour form wall. One of the engineered ties used to hold the form in place snapped allowing for concrete to pour out of the form, striking the scissor lift from which the employee was working, and causing the scissor lift to topple over. The employee fell to the ground where he sustained serious injury to his arm and pelvic region.",1
"An employee was on a 6/12 pitch roof tearing off shingles from a single story residence. The employee was wearing a harness and attached to a lanyard that was anchored on the roof. At the time of the incident, the employee was preparing to get off the roof and disconnected his lanyard from the harness. He was transitioning to the ladder and lost his footing falling 6 to 8 feet to the ground below. The employee fractured a bone in his back and was admitted to the hospital.",1
"An employee was operating an angle cutting machine. When the employee tried to remove a piece of metal, the machine began another cycle and the metal plate on the machine struck the employee's wrist causing a severe laceration, severed tendons, and broken bones.",1
"The employee was placing material from the back of the truck onto a door that was lying across the forks of a forklift. When he stepped backwards, he stepped onto the edge of the door, lost his balance and fell to the concrete 4 to 5 feet below. The employee sustained a compound fracture to the leg and injured his foot and ankle.",1
"On July 12, 2016, an employee was admitted to the hospital as a result of crushing injuries that resulted in a laceration across the palm of the hand. The employee was cleaning the rollers on a roll coater machine with a cotton shop rag when a hand was pulled into an in-running nip-point between rollers.",1
"An employee slipped off the bottom rung of a truck mounted ladder and fell to the ground, resulting in a fractured right hip.",1
An employee was slicing meat using a meat slicer when his left pinky fingertip contacted the cutting blade and was lacerated.,1
An employee was attempting to stabilize the concrete barrier that was being lifted by a rubber tire loader. The operator of the rubber tire loader lowered the barrier and caught the tip of the employee's right foot resulting in amputation of the tip of the right foot to the first joint.,1
"An employee was working under a conveyor belt. When he reached for a non-moving part, his shirt sleeve was caught in the conveyor belt. His hand was then pulled into the belt, causing a strain and sprain to the wrist, minor burns from the belt's friction, and ligament tears on the first and second fingers.",1
An employee was turning around and caught a foot on a scale in the hallway causing her to fall on her side. The employee sustained a break to the tip of the femur.,1
"Cutting a piece of plexiglass with a table saw when the employee's right hand was pulled into the blade, amputating the ring and middle fingers at the first knuckle.",0
"The employee was selecting product on the third floor of a warehouse when he felt ""weird.""  He went to an air conditioned room and sat down. He started to feel dizzy, sweat profusely, have tunnel vision, muscle spasms, and numbness in his legs.  The employee was hospitalized for heat related stress and dehydration.",1
"An employee was attempting to adjust the bars on a drill rig but the drill rig rotated and hit the employee. The employee was caught between the drill rig and the casing, suffering abdominal trauma.",1
"An employee was picking up a bag in an aisle when a passing forklift ran over his foot, crushing his toe.",1
"On July 14, 2016, at approximately 1:40 a.m., an employee was located at the end of the line where aluminum was being rolled onto a coil. Wearing cotton gloves, the employee was checking for edge cracks and used sand paper when he observed a spot. The roll was moving at approximately 900 feet/minute when the operator of the machine saw the coil buckle and hit the E-stop to prevent damage. While using the sand paper, the employee's left hand/fingers were severely crushed between the moving coil and the roller, requiring hospitalization.",1
An employee was working on an air cylinder when it activated and crushed his left index finger resulting in amputation.,0
An employee was climbing up a scaffold when the scaffold fell over. The employee sustained a broken leg.,1
An employee was hospitalized for a bruised arm and hand after he fell from a ladder.,1
An employee was operating a cutoff wheel on a grinder when the wheel separated and struck the employee on the left arm and severed a vein.,1
"While checking lines, an employee inhaled a chemical and experienced respiratory distress and tightening of the chest. The employee was hospitalized overnight for possible exposure to a gaseous substance.",1
"An employee was pouring concrete when he became disoriented due to heat stress, requiring hospitalization.",1
"On or about July 14, 2016, an employee was restraining a cat while waiting for euthanasia. The cat began thrashing out of control and bit the employee. The employee was hospitalized.",1
"An employee was installing a security camera when the ladder he was standing on slipped out from underneath him and he fell approximately 7 to 8 feet. He fractured his fibula, scapula, and L1 vertebra.",1
"Two company employees were in charge of traffic control/flagging operations on both ends of a street paving operation. One of the employees stopped vehicle #1 in the oncoming lane. Vehicle #2 then rear-ended vehicle #1, which in turn struck the employee. The employee was thrown approximately 30 feet and was hospitalized to receive head and elbow stitches.",1
"An employee was in the process of setting up an RMC machine that takes mozzarella cheese and forms it into a block. The employee was installing a plastic wedge (approx. 2 ft. x 2 ft. x 1 in. thick, weighing approx. 25 lbs.) into the machine and amputated the right index fingertip.",0
An employee dismounted from a crane boom he was reconfiguring and fractured his ankle.,1
"An employee was attempting to unjam a paper wrap-up in a machine when a coworker jogged the machine. The employee's right hand was drawn into the rollers, de-gloving the index and middle fingers.",1
"An employee filled a mop bucket with hot water. When the employee moved the bucket, hot water splashed onto and burned his right shin, ankle, and foot.",1
An employee was placing a sticker on a pallet when he was hit by the arm of the pallet wrapping machine. His arm was broken.,1
"Two employees were performing compression checks on cylinders. One employee opened the gas valve and another employee was bending over to light the starter. The gas flashed, engulfing an employee and causing second degree burns to his face, neck, wrist, and back.",1
"An employee went to retrieve a tool from another section of the cooling tower. En route, his pinky finger (left) was caught in the belt/pulley system of a maintenance fan as he passed by, amputating the fingertip.",1
"An employee was greasing a conveyor when his foot slipped from the framework he was standing on and ended up on the chain drive and sprocket. The drive and sprocket crushed the toe box of his boot, partially amputating his right big toe.",0
An employee was cutting meat with a band saw when the saw amputated his left thumb at the knuckle.,1
"On July 14, 2016, an employee sustained a broken foot when the outrigger on the truck landed on his right foot.",1
An employee amputated the tip of his thumb while attempting to help dock a motor boat.,0
An employee climbed a pole to raise conductors off of the ground. The pole broke at the ground level while the employee was on it. The employee hit the ground and suffered a fractured right hip.,1
"On or about July 14, 2016, an employee was performing a vertical cut in a concrete wall using a gas-powered masonry cut-off saw when the saw kicked back, lacerating the employee's chest.",1
"An employee was struck by the fork of an oncoming forklift, lacerating his left foot and breaking three toes.",1
"An employee was coming down a ladder to leave the roof when he slipped off and fell approximately 6 feet, suffering ankle and back sprains.",1
An employee was testing a 240v line that had a fault and received an arc flash burn to their left arm.,1
"On 07/14/2016, at approximately 11:15 a.m., an employee was using a saw to cut 4'x8' panels. As the employee was retracting the table back to its starting position, the blade cut the employee's right-hand middle, ring, and pinky fingers, amputating the pinky and ring fingertips.",0
An employee was trouble shooting line equipment. The stack un-loader rotated and struck the employee fracturing the left jaw.,1
"On 07/18/2016, at approximately 11:30 a.m., an employee was operating a flour mill, a machine that consists of a hopper that goes into an airlock. The airlock moves air with a squirrel cage type system. The hopper became clogged, so the employee unbolted and removed a plate to try and clear the clog. The employee's right hand then hit the squirrel cage's assembly, amputating the middle finger at the first knuckle.",0
An employee was bitten on the hand by a cat and required hospitalization.,1
"An employee was filling a lawn mower tire with air when the tire popped and struck the employee's hand, fracturing it.",1
An employee was cutting grass and started complaining of chest pain and shortness of breath. The employee was admitted to the hospital.,1
An employee was putting parts into a CNC machine and amputated the right middle finger at the middle joint when the hydraulic clamp closed on the finger.,1
"An employee was trying to de-escalate a situation with a patient when the patient attacked the employee, fracturing the employee's jaw.",1
"An employee fell off a ladder, fracturing a wrist and the pelvic bone.",1
An employee was coming down the truck's fixed ladder when his right foot slipped inside of the ladder resulting in a broken right tibia. The employee was admitted to the hospital.,1
"An employee tripped and fell, hitting the concrete floor and breaking his hip.",1
An employee was inspecting a conveyor and amputated the right ring fingertip while replacing the guard.,0
"On Friday, July 15, 2016, an employee was operating a packing machine and suffered the amputation of two fingers and one partial finger after their left hand was caught in the drawer of the packing machine while attempting to clear a jam.",1
"An employee was injured while performing a routine wheel inspection diagnostics checklist. During this inspection and as the wheel assembly was spinning, the employee's right hand entered into the wheel assembly and his index finger extended beyond the spoke of the wheel as it passed the brake caliper assembly. A pinch point occurred between the caliper and the spoke and amputated the fingertip.",0
"An employee was driving south on the highway when a tree branch fell on top of the car breaking the windshield. The employee suffered head, neck and shoulder trauma and facial lacerations.",1
"An employee was cutting a beam with a torch. When the beam was cut, it rolled and fell on and crushed both of the employee's feet.",1
An employee was hospitalized due to heat exposure.,1
"An employee was troubleshooting a filler machine. While replacing the guard on the track chain, the employee's left thumb was amputated at the knuckle.",0
An employee was stamping metal using a press and amputated the pad of the right thumb.,0
An employee was flagging traffic for a construction site and was struck from behind by a truck exiting the road. The employee suffered two fractured ribs and two fractured vertebrae.,1
An employee fell from the second floor landing to first floor landing while delivering sheetrock and suffered lacerations on the chin.,1
"While conducting well servicing operations, a rig crew was changing out swab cups and preparing to go back into the hole (oil well), when an employee had his hand pinched between a bar and the tubing resulting in the amputation of the employee's pinky finger.",1
An employee was operating a straight cut machine and amputated the right index fingertip.,1
"An employee was lifting panels from one place to another place, finished the job and then went home. While at home the employee felt pain in his chest. The employee went to the hospital and was admitted with a collapsed lung.",1
"An employee was working from a scissor lift at a jobsite and fell out of the scissor lift onto the concrete below fracturing ribs, a leg and vertebrae.",1
"On July, 15, 2016, an employee suffered an amputation of three fingers on their left hand when their hand was crushed between the die and steel rail while operating the rail pierce machine to punch holes in a steel rail.",0
An employee was repairing a diesel fuel tank. He was burning off extra metal after the repair and the vapors ignited. The employee received second degree burns to the face.,1
An employee fell off an elevated bed onto a railroad track and was hospitalized with a fractured elbow. ,1
The employee was working at the stacker end of the cut to length line. The table in the stacker was being raised to be at the same elevation as the conveyor on the cut to length line so product could begin to be stacked. The employee went to remove a board from the table and his right middle finger was caught between the board on the table and the stacker resulting in a fingertip amputation.,0
"An employee was driving a tri-axle dump truck, delivering a load of stone to a customer at a camp ground. The employee raised the bed of the dump truck 2-3 feet and then went to observe the load. He noticed the load was unbalanced and was causing the truck to lean to the driver's side. The employee got back in the truck and started to lower the bed. At that point, the telescoping rod that raises and lowers the truck bed broke. This caused the truck to tip over onto the driver's side. The employee climbed out of the passenger side and down a ladder. The employee was  hospitalized for a fractured T-12 vertebrae.",1
An employee was mowing the lawn on the side of a hill. He lost his footing and his foot went under the mower amputating two toes.,0
An employee was operating an electric walking jack. While making a turn his right foot was pinned against a shelving unit resulting in multiple fractures.,1
"On July 15, 2016, an employee was skimming slag off the top of a pot of molten bronze when some of the slag and molten bronze dropped onto his coveralls. The molten bronze and slag, with a temperature over 2000 degrees Fahrenheit burned through his coveralls, seriously burning his shin, ankle, and foot before his boot could be removed.",1
An employee was swabbing the inside of the pipes for testing before sauces ran through. A pipe slipped off the employee's shoulder. His right index finger was caught between the end of the pipe and the pump's housing amputating the fingertip.,0
"Four employees were dumping fixtures from the platform on a forklift into the dumpster. An employee climbed up the side steps of the dumpster to pull fixtures from the platform and fell to the ground fracturing both shoulders, a knee and the nose.",1
An employee was erecting a wall and became disorientated. The employee was hospitalized.,1
"An employee was hospitalized on Friday, July 15, 2016, after having an allergic reaction to epoxy flooring adhesives. The employee presented with swelling and a rash.",1
"An employee was installing a replacement garage door at a commercial business.  During the installation, the crew released the tension off the last of three overhead springs. The spring caught the employee in the shoulder and upper right arm causing a severe laceration and pulling the employee into the side of the structure.",1
"Two employees were working in the roll finishing area of the paper machine building. A 2,000-5,000 lb. roll of paper smashed an employee's feet and toes causing fractures and contusions requiring hospitalization.",1
"An employee was using a ladder to retrieve a package in the storage area. She miss-stepped coming down the ladder, fell, and tried to catching herself using her leg. Her leg broke beneath the knee.",1
An employee lost control of a forklift and tried to manually stop it with their left foot. The foot was caught between the forklift and the base of a warehouse rack and fractured. The employee was hospitalized.,1
An employee was covering up equipment to keep it from getting wet in the rain. As the employee tried to tie up the cover his right hand was caught between a moving sprocket and chain resulting in a right pinky finger fracture and a laceration to the right ring finger.,1
"With the assistance of a sling swing the employee was loading a big gas valve into a truck with his bare hands. During the loading, the sling rotated thus rotating the valve, which caused the employee to pinch his finger between the sling and the valve resulting in the amputation of his thumb just below the fingernail.",0
An employee fell from the back of a flat bed truck as he was unloading beams and ruptured his spleen.,1
An employee was guiding the forklift operator while unloading steel bars from the delivery truck. The strap holding the steel bars together snapped and the steel bars fell on his foot.,1
An employee was operating a rubber tire roller. The roller went off the road and as the employee returned the roller to the road the roller tipped over resulting in injury to the employee's face.,1
An employee tripped and fell while trying to stop a rolling dolly resulting in a fractured left arm.,1
An employee was organizing pallets in a warehouse. A wooden pallet fell onto the employee and fractured an ankle.,1
"An employee was preparing to dismantle formwork. With the wedge pins of the formwork removed, the employee attempted to step out onto an outrigger. The employee fell and his harness, tied off to the formwork, brought the form work down on his ankle, breaking the ankle.",1
"An employee was cleaning up for the day and was setting a metal shelving unit onto the bucket of a backhoe machine. The employee lost control of the shelf and it dropped, pinching his index finger between the bucket and shelf. The finger was amputated at the first joint.",0
An employee was hospitalized with left shoulder and wrist fractures due to tripping over a cord and falling in the deli department.,1
"On 7/16/16, an employee had just finished filling one of the rollers with water and was walking around the roller. A second roller came by and the operator put his roller in neutral. The injured employee walked between the two rollers and was caught between the rollers resulting in a broken shoulder and arm.",1
An employee was returning a patient that was trying to flee the hospital back to the ER. The patient kicked and the employee was knocked off balance and fell. The employee was hospitalized with a broken collar bone.,1
An employee was sitting in a chair under the grandstand. The chair was on an incline and she fell. When she went to brace herself she injured her left arm. The left humerus was fractured in three places and required surgery.,1
An employee was using a drill press and amputated a portion of the left middle finger.,0
"An employee was trying to release a work float that had become wedged under a waterside rescue ladder. The employee was standing on a walkway and used his left hand to try and release the work float. As the float released, the walkway came down and caught the employee's left hand between an angle and the walkway, which partially amputated the pinky finger. The employee was admitted to the hospital for surgery.",1
"An employee was dismantling scaffold when a large exhaust fan turned on. The fan blades amputated the employee's right middle fingertip below the nail bed, fractured the right ring finger and lacerated to the right index finger.",0
An employee was walking on the north side of the H-602 hot oil heater unit when he tripped over a scaffold pole and landed on both elbows. The employee was admitted to the hospital with two fractured elbows. The right elbow fracture required surgery.,1
An employee was cutting material for RV trailer manufacturing using a foot controlled chop saw. When he hit the control with his foot the upcut saw amputated three fingers on the right hand.,1
An employee was working on a 6' ladder installing a light fixture. The employee received an electrical shock and fell from the ladder fracturing his foot.,1
An employee was cutting grass along a hill with a self-propelled push mower. He slipped and the mower ran over his feet. The blades struck his right big toe. Half of the toe was surgically amputated.,1
An employee was stocking beer bottles. He dropped a bottle which shattered and a piece of glass went into his left eye. The employee was hospitalized.,1
An employee was moving a beam with a crane and sustained a foot injury.,1
An employee tripped on an all purpose container (APC) netting and fell to the ground fracturing his elbow.,1
An employee was struck by a forklift resulting in a fractured femur and wrist.,1
An employee was delivering a linen cart and got the first two toes on his right foot caught in the dock leveler and crushed when the linen cart was placed on it.,1
An employee was finishing the drywall on a mobile rolling scaffold when he stumbled off of the scaffold while attempting to climb on top of the scaffold's platform. He fell against the wall and pinched a nerve in his back. The employee was admitted to the hospital.,1
An employee suffered back and pelvic fractures when a piece of machinery fell on him.,1
An employee pinched a nerve in his back while pulling pallets and moving boxes. He was hospitalized.,1
"An employee was working on a billboard while standing on a step ladder. The ladder kicked out and the employee fell about five feet, then rolled down an embankment about ten feet. He suffered a broken wrist.",1
An employee tripped over plastic produce crates and fell fracturing their right hip.,1
An employee was making routine rounds at the plant when a power outage occurred causing a fan to fail. The employee was overcome by sulfur dioxide. The employee did not have a respirator at the time of the incident.,1
"At approximately 10:45PM on 7/17/16, an employee was cleaning glue from the rollers on the off-line laminator when his left hand was caught in between the rollers. The employee suffered crushing injuries and was hospitalized for surgery.",1
An employee was re-setting the car wash and slipped and fell fracturing a knee.,1
An employee was troubleshooting a malfunction on the walking floor near the baler and amputated the left thumb when the door closed on his hand.,0
An employee was struck by a trackhoe while working in an excavation resulting in a chest contusion and chin laceration.,1
"An employee was performing maintenance on the B Extruder when he sustained a left pinky finger first digit amputation and fracture. The employee was removing an upper roll for the flat belt. While supporting the roll with one hand and removing bolts with the other hand, the employee lost control of the roll pinching/smashing the left pinky finger between two rollers.",0
An employee was sweeping the floor of the tunnel and struck his head on a structural member of the building causing a concussion.,1
An employee was conducting stucco work while on the third buck of a scaffold when he fell 18 feet to the ground resulting in facial and skull fractures. He was admitted to the hospital.,1
An employee was working in the ingot cooling and stacking area when he became overheated. The employee was hospitalized for heat exhaustion.,1
An employee was operating a laminator machine. While feeding product into the laminator his glove was caught in the rollers pinning his left hand in the machine.,1
An employee was packing plastic bags when a bag became stuck in the winder. The employee attempted to remove the bag from the winder and his right arm was caught in the winder and fractured.,1
"An employee on a construction site was standing while talking and suddenly passed out possibly due to heat, hitting their head on the wall and falling to the floor. The employee was hospitalized.",1
An employee left work not feeling well and was later admitted into the hospital for a heat related illness.,1
An employee was delivering mail and began cramping. The employee was hospitalized for heat stress.,1
An employee was hospitalized for heat stress.,1
An employee suffered an allergic reaction to latex balloons that had been placed on the work floor as decoration for an event. The employee was later hospitalized.,1
An employee was operating a forklift when their foot became caught between the forklift and an I-beam. The operator's foot was broken.,1
An employee was preparing to cleanout a planer. He removed the exhaust chute and reached into the machine while the planer blades were still coasting resulting in the amputation of the left ring fingertip.,0
An employee fell from a vehicle trailer.,1
"On July 14, 2016, at approximately 9:45 a.m., a cutter operator placed paper in a skid to be cut. When the skid moved, the employee's left pinky finger became caught between the cutter and the lift. The employee's left pinky finger was surgically amputated the following day.",0
An employee reported feeling dehydrated and vomiting due to heat. He was hospitalized.,1
Two employees were working in a lift bucket truck cleaning a cross arm when the boom failed and the bucket hit the truck. One employee remained in the bucket and the other was thrown out of the bucket. Both employees were attached to the bucket with harnesses and lanyards. One employee received a broken rib and bruising.,1
Employees were stripping a tile floor in preparation to wax it. One of the employees slipped and fell on the wet floor striking his head and sustaining a small laceration. The employee was hospitalized due to a possible head injury.,1
An employee was on a platform. When he stepped over a ladder he lost his balance and fell to the ground fracturing the right foot.,1
"An employee was hospitalized after he fell from a ladder while painting a building. The employee fell backwards off the ladder, which was up against a parking bumper for stability, and onto the bumper. The employee received bruises to his head and back, a broken pelvis, and two broken heels.",1
"At the end of shift, an employee turned off the grinder and used his right hand to clean meat off the grinder plate. The employee's right index finger went into a hole in the grinder plate and the fingertip was amputated.",0
"An employee was partially pinned underneath the front three sheets of bundled steel plates that slid off of the front of a flatbed trailer while the crane was attempting to set them down on the trailer. The employee suffered a fractured cheek bone and ocular socket, a large laceration on his back, and a dislocated shoulder.",1
An employee fell while walking into the cooler and fractured their right hip.,1
An employee had been outside in hot temperatures for approximately three hours standing on the ground watching bags of feed being loaded into a hopper bottom truck. The employee began feeling ill so he went and sat down for a while. When he stood up he seemed to be confused. He was admitted overnight for heat exhaustion.,1
An employee was operating a drill press when the employee's glove was caught in the drill bit. The employee's fingers were injured requiring surgery.,1
Employees were picking up a mud pump using a winch and two trucks. The winch line slipped and broke causing the truck holding the pump to be raised approximately five feet off the ground and then slammed back down. The employee in the truck suffered a compression fracture in their back.,1
An employee was struck by a vehicle operated by another employee in the parking lot. The employee suffered broken ribs.,1
An employee slipped and fell on a sidewalk breaking a hip.,1
A powered industrial truck operator was transported to the hospital after becoming lethargic and unresponsive during a work break. The employee was admitted to the hospital due to dehydration.,1
"On or about July 18, 2016, an employee was trying to prime a chemical metering pump. Chemical splashed out of the drum and onto his lips and mouth. The employee was hospitalized for chemical burns.",1
An employee was hauling a concrete post with a forklift. The employee got off the forklift and became pinned between the forklift and a dumpster. The employee suffered a fractured right fibula and big toe.,1
"An employee was untying a 32-foot extension ladder from the building. As the employee descended the ladder it began to slide sideways. The employee kicked free from the ladder and fell approximately 15 feet, resulting in fractured ribs and a collapsed lung.",1
"On Monday, July 18, 2016, an employee was not feeling well while on his lunch break. Approximately an hour later he returned to his duties and completed his shift. He was off the following day, July 19th, and was still not feeling well. He went to his doctor and was diagnosed with dehydration and heat exhaustion. He was then admitted to the hospital.",1
An employee was assisting an air conditioning contractor position an air conditioner for the crane lift. The employee's right hand was caught between the air conditioner unit and the curb/asphalt causing the amputation of the right middle fingertip and a fractured finger.,0
"An employee tripped and fell while walking in the carpeted aisle inside the building, sustaining a right shoulder injury.",1
"One of the wheels of a semi-truck was trapped in a hole. The truck's driver asked an on-site employee to hook the truck to a yard dog so they could pull the truck's wheel out of the hole. The on-site employee hooked the truck to the yard dog and then boarded and operated the yard dog. As the yard dog began pulling, the brakes on the yard dog malfunctioned, causing it to move backwards. The driver of the semi-truck was standing between the semi-truck and the yard dog, and was crushed between the vehicles, sustaining two broken hips and a crushed pelvis.",1
An employee fractured her left ankle when she slipped coming out of a dunk tank during an employee appreciation event.,1
An employee was working on a flat roof and using a pump sprayer to spray material onto the roof. He tripped over the power cord and fell and breaking his right wrist.,1
"An employee was attempting to remove a stainless steel window sill segment from the drive-thru window system using a cordless drill. The screw he was removing reversed quickly, causing his left thumb tip to become pinched between the stainless steel section and the drill he was operating, resulting in a partial amputation.",0
An employee was on the roof to repair a leak when he stepped on and fell 24 feet through the sky light to the ground resulting in a broken hip. He was admitted to the hospital.,1
"A driver became light headed and nauseated at approximately 3:19p.m. on 7/19/16, at one of his truck stops. He was hospitalized for dehydration and heat stress.",1
An employee was clearing brush and experienced heat stress.,1
An employee was re-stacking corrugated sheets on a conveyor storage line when their left foot was caught between two sections of the conveyor resulting in a laceration/de-gloving injury.,1
"At 4:15 p.m. on 7/18, an employee was cleaning a hot polymer glue press-pot using a scraper. The scraper broke, which caused both hands and her left forearm to come into contact with the hot glue. She sustained second degree burns to the palms and fingers of both hands and to the left forearm.",1
"An employee was assisting during the installation of a new washer/dryer in a private residence. After plugging in the appliance to an outlet, he touched the dryer and received an electric shock. He was hospitalized.",1
An employee became ill while riding on the back of a trash truck. He was hospitalized for dehydration.,1
An employee was unboxing furniture and stepped on a nail on the furniture frame.,1
An employee was rigging steel and started to experience symptoms of heat exhaustion. The employee was hospitalized.,1
An employees' finger was amputated when it was caught in a roller of a print roll machine.,1
"An employee was walking down a flight of stairs from the fourth floor to the third floor. She twisted an ankle and fell, resulting in an ankle fracture.",1
An employee was hospitalized for heat exhaustion and dehydration.,1
"On July 19, 2016, at approximately 7:10 p.m., an employee was loading a tube in the tube bender when a clamp closed on the employee's right fourth and fifth fingers. A portion of the fourth finger was surgically removed the following day.",0
An employee was on an oil rig handling the tubing and suffered a heat-related illness resulting in hospitalization.,1
An employee was leaving the evisceration break room when the door started to close and her right middle finger was pinched in the door jam resulting in a partial amputation.,0
"An employee was standing on the flatbed trailer while securing the freight when he lost his footing and fell off of the trailer. His legs were tangled in the airline causing him to turn on the descent and strike his head on the ground. He was hospitalized for treatment of contusions to his head, right arm and wrist.",1
"An employee was climbing a ladder, slipped due to a faulty grab bar, and fell approximately 12 feet. He was admitted to the hospital for a broken wrist and a bruise to the head.",1
"While delivering product to a customer location, the employee's foot slipped off of a second level of concrete on which the ramp was set up. He attempted to regain his balance by using the hand truck (dolly) to stabilize himself, but the hand truck fell and his thumb was pinched between the ground and the hand truck. This caused a portion of his left thumb to be amputated just above the knuckle (just behind fingernail).",0
"An employee was standing between a pickup truck and a wagon attempting to connect the two together, when the truck rolled back pinning the employee between the truck and wagon. The employee suffered a broken shoulder, left arm, left clavicle and four ribs on the left side.",1
"An employee was servicing a chilled water line by cleaning the line with hydrogen peroxide. There was a combustible reaction and the pressure blew the lid off the stream filter housing unit. The lid struck the employee on the right hand that was being used to protect his face, causing multiple hand fractures requiring surgery. Minor burns were also incurred on the right hand/arm.",1
An employee was climbing a fixed ladder to the roof and fell. The employee sustained a fractured left ankle and leg requiring hospitalization and surgery.,1
An employee fell off a porch roof approximately 10' above the ground and was hospitalized for a broken ankle and shoulder.,1
"An employee and his supervisor were carrying a boiler part (weighing approximately 110 to 120 pounds) in tandem and placing it atop a pile. The employee was wearing Kevlar Gloves covered with rubber gloves (i.e.; two layers of gloves). The employee was helping to stabilize the boiler part on top of another part already stacked in the pile. The part the employee was adjusting shifted and the employee's left index finger was pinched between two parts. The employee tried to pull his finger out of the pinch point, and suffered a fingertip amputation with the loss of some bone.",0
An employee was hospitalized with a fractured elbow after he fell 12 feet through a floor hole.,1
An employee was painting from a boom lift and fell 8 feet out of the lift and landed on an iron fence. She suffered an impalement injury to the right leg and a broken rib.,1
An employee experienced severe leg cramps and abdominal pains while working in the heat.,1
"On July 19, 2016, an employee suffered a partial little finger amputation while guiding the well casing into a bore hole.",0
An employee was working in the receiving area of the store. A pallet with metal shelving on it fell approximately 12' striking the employee on the head and causing a head laceration.,1
An employee working on a barge tripped and fell 4.5' to a lower deck.,1
"On 7/19/2016, an employee was operating a walk-behind commercial lawnmower on a terraced hillside. He went to mow a strip located between two 8 foot retaining walls. He fell over one of the 8 foot retaining walls and suffered a broken left femur and skull fractures.",1
An employee was struck by a material moving machine and suffered a fractured right ankle.,1
The injured worker was on a scaffold measuring chilling water piping. The electrician turned on the water circulating pump that was hooked onto the chilling water piping. The junction box that the wiring was inside of shorted and the injured worker received an electrical shock.,1
An employee was using a cutting torch to cut a strip of steel from a master coil cylinder. The strip of steel that was under tension struck the employee in the stomach.,1
"On 7/19/2016, an employee was performing maintenance on a palletizer lift elevator. The lift platform was elevated about 3 inches with a chain fall in order to adjust the lower jack bolts. The elevator dropped, crushing the employee's left index finger between the jack bolt and palletizer elevator resulting in an amputation close to the second knuckle on the left index finger.",0
"A 4'x11' concrete form wall was being lifted with a crane. During the lift, an employee walked near the lift area to retrieve some tools. As the employee walked into the lift area, the form wall got caught on another piece of the construction project. The form wall came out of it's rigging and fell to the ground, tipped over, and struck the employee on the head and back. The employee was hospitalized and suffered 2 fractured vertebrae.",1
An employee overfilled a tank and corrosive liquid splashed onto the employee causing chemical burns.,1
"An employee stepped on a metal grate that had a weak corner from where a pipe was penetrating through the grate, lost his balance, and fell 10-16 feet into a sloped pit. The employee sustained a soft tissue injury to his left leg and ankle and a mild concussion.",1
An employee began to suffer from heat exhaustion while working outside to complete an installation for satellite television.,1
"While operating a divider machine, an employee attempted to clear a dough jam and suffered a left index finger amputation above the first knuckle.",1
An employee was filling candle forms with hot wax. Hot wax leaked onto the floor. The employee slipped on the hot wax and fell on the wax suffering third degree burns to the right calf and first degree burns to other parts of the body.,1
An employee was admitted to the hospital for heat exhaustion.,1
"While starting a pumping unit at a well site, an employee felt ill and asked for assistance. The employee was hospitalized for heat stroke.",1
"On July 20, 2016, at 2:15 p.m., an employee was attempting to climb out of a 55-gallon drum when he slipped and fell on the top ridge of the drum resulting in a kidney injury.",1
"While sorting packages inside of his truck, an employee got dehydrated and passed out. He was hospitalized.",1
The employee was supervising the expansion of a high school and suffered heat exhaustion/dehydration.,1
"An employee was welding a trailer sub-frame that weighed approximately 850 - 900 lbs. The sub-frame tipped over and struck the employee before hitting the floor. The employee suffered four fractured vertebrae, a right foot fracture and a fractured left shoulder.",1
"An employee placed their left hand on the line conveyor, which moves doors down the line. When the conveyor started up, the employee's left middle finger was caught between the steel frame of the conveyor and a gap in the steel conveyor belt, resulting in a partial amputation and an open fracture to the left middle finger.",1
An employee slipped and fell on stairs injuring their back.,1
An employee was setting up to repair a heat transfer leak on a mill and was exposed to organic vapors through a chemical reaction. The employee was using brake clean and a water miscible degreaser detergent when a chemical reaction occurred.,1
An employee suffered a back injury while moving a patient in bed.,1
An employee was cleaning up and hot water (estimated at 150-200 degrees F) got inside the top of his boot burning the employee's right foot.,1
"On July 20, 2016, an employee experienced a fingertip amputation when the ram of a hydraulic press crushed the employee's finger on a trunnion part.",0
An employee was hospitalized for a heat related injury.,1
An employee was operating a circular saw when their vest got caught up in the saw. The employee's right quadricep was lacerated.,1
"On July 20, 2016, at around 6:40 PM, an employee was walking at the jobsite beside the dirt mound and was struck by the skid steer that was backing up at the moment. The employee suffered a broken ankle and lower body injuries and was admitted to the hospital.",1
An employee's foot was pinned under the motor of a gantry crane he was operating. He was pulled along for 38 inches and was hospitalized with two broken toes and a broken metatarsal.,1
An employee amputated his right index finger when he was fixing the polarizer machine.,0
"An employee was installing an air bag. While inflating the air bag after installation, the air bag base gave way and was ejected striking the employee in the face (cheek and nose area). The employee suffered lacerations to the face/head and facial fractures.",1
An employee tripped over a lobby cart and fell breaking her right arm. She was hospitalized.,1
"An employee was attempting to remove jammed material from a corrugated roll former machine. His glove was drawn into the rollers, causing a degloving injury to his right thumb between the fingernail and the first knuckle.",1
An employee was operating a table saw and amputated the left index finger while moving material away from the blade.,1
"An employee was painting a room with a paint sprayer (approximately 2000 psi). The equipment malfunctioned and the employee's left thumb was lacerated. In addition, paint was injected into the laceration.",1
An employee fell backwards off the outside cab step of a truck to the ground and fractured ribs.,1
An employee was transported to the hospital after suffering stomach cramping and was hospitalized for dehydration.,1
"Rigging employees were setting a pipe that was 20 feet long, 24 inches in diameter, and weighed 5 tons. As the load was being transferred from the crane to the rack, the riggers were adjusting the chain fall hoists. Slack was taken up in one of the hoists, which caused the pipe to lift. When the pipe lifted the injured employee was straddling the beam, and the shoe plate of the pipe contacted the injured employee's left lower leg, causing a compound fracture. The employee was admitted to the hospital for surgery.",1
The employee observed a broken rubber conveyor band and attempted to remove it. He reached into the conveyor power roller and amputated the right index finger and lacerated the middle finger.,0
An employee was hauling wood chips in an open trailer with a tractor when the tractor flipped going down a hill.,1
"An employee operating an electric pallet jack was rounding an aisle and became pinned between the pallet jack handle and a fixed storage rack, sustaining five broken ribs. The injured employee was hospitalized.",1
"While conducting maintenance on the battery charger of an order picker, an employee's right index fingertip was caught between the chain and cog of the order picker and amputated when the order picker was activated.",0
"An employee was clearing a jam in the forming die and amputated the left index and ring fingertips, and the middle finger to the first knuckle.",1
"Employees were unloading a flatbed truck in the laydown area of the job site. An operator picked up a piece of pipe with a telehandler to unload it. Another employee signaled the operator to lower the pipe down onto the truck to readjust the straps. When the tie down strap released, the pipe rolled and struck an employee's lower right leg fracturing it. The load also struck another employee in the lower back. Both employees were knocked off the truck by the rolling pipe.",1
"An employee was unloading a shipping container that contained bundled lumber products. The bundles of lumber were stacked both horizontally and vertically. As the employee worked inside of the shipping container, a vertically stacked lumber bundle fell and struck the employee on the right leg, fracturing the employee's right femur.",1
"An employee had been tying rebar under a covered shed and reported having cramps at 10 AM. He was taken to the air-conditioned office and given fluids, but the cramps continued. He was then hospitalized.",1
"An employee was repairing cable lines at the top of a telephone pole. As he was climbing down the pole using the preinstalled pegs on the pole, he missed a step and fell 10-12 feet breaking both legs and an ankle.",1
An employee suffered burns to their forearms and dizziness from exposure to a chemotherapy drug (Sevoflurane/Ultane) that had spilled. The employee was hospitalized.,1
"An employee suffered heat related injuries and was hospitalized on July 20, 2016.",1
An employee was setting metal posts when he slipped off the curb and broke his right ankle.,1
"On 07/20/16, an employee fractured his right ankle after falling off the back of a trailer.",1
An employee fell onto a safety rail and suffered broken ribs. He was wearing fall protection.,1
An employee was mowing grass using a riding lawn mower near a drop-off on the grounds. The mower got stuck. The employee dismounted the mower to push it and the mower flipped onto the employee fracturing ribs.,1
An employee was running rods into the well when the elevator/block began to lower. Something caught the elevator/block and pulled the elevator/block into the rod basket striking the employee.,1
An employee was delivering merchandise to a customer and while on the lift gate he slipped and fell to the ground injuring his spleen.,1
An employee was not feeling well and was sweating heavily. The employee was admitted to the hospital for treatment of heat related illness.,1
"An employee was kneeling down on the ground shooting grade at an active construction jobsite when he was struck by a backing bulldozer, fracturing his ankle.",1
An employee sustained severe burns on his whole body when heated wax spilled out of a wax tank.,1
An employee was trying to flip a metal stair stringer over when it fell onto his hand and crushed his index finger between the stair stringer and the concrete resulting in the amputation of the index fingertip.,0
"On July 20, 2016, at approximately 12:30 pm, an employee was in the process of moving a loaded barge with a cable that travels through a sheave. The employee's hand became caught in the sheave amputating the employee's right index, middle, and ring fingers at the first knuckle.",0
Employee fell approximately six feet from scaffolding while dismantling it and was hospitalized for cuts and a fractured arm.,1
An employee was burned on both hands and arms when hot plastic shot out of the throat of the plastic injection molding machine.,1
"On July 20, 2016 an employee was admitted to the hospital for kidney failure from heat stress.",1
An employee felt ill at work after using MEK solvent (Butanone) and was hospitalized.,1
An employee was bitten by a rattlesnake on a finger on his right hand while moving boards on location.,1
An employee was cleaning the vertical mixing shaft on Mixer #3 and got his hair caught in the mixer shaft. The employee was scalped.,1
An employee was cleaning the material feeder into a mechanical punch press. The employee's glove got caught in a gear of the feeding machine. The finger was pulled into the gear crushing it. This resulted in the amputation of the right  index finger at the first joint,0
An employee felt dizzy and ill and began vomiting while working in the truck paint area. The employee was admitted to the hospital with heat related illnesses/dehydration.,1
An employee was walking on the docks and tripped over freight resulting in a broken arm.,1
"An employee was transferring a rubber pad from the railroad flatcar deck to a table to be cut when he lost his balance and fell from the rail car. The employee received facial lacerations requiring stiches, a fractured nose and a fractured vertebrae.",1
An employee was struck by a vehicle while working on the side of the road.,1
An employee was welding and was hospitalized for dehydration/heat stress.,1
"An employee was driving a stand-up forklift when it turned sharply into a concrete door frame, pinning the employee against the wall. The employee suffered a pelvic injury.",1
An employee was installing expansion joints on a bridge attachment while working from a man lift. The employee grabbed hold of a pipe on the bridge and sustained electrical burns to his arms and legs.,1
"On July 21, 2016, around 2:30 p.m., an employee was driving from one corn field to another when she felt ill due to heat stress and pulled over to call for assistance. She was hospitalized.",1
An employee degloved his thumb and amputated a finger on the left hand while operating a clamper machine.,1
An employee was using a drill press when their glove was caught in the drill bit drawing the left index finger into the bit and tearing tendons in the finger.,1
An employee was outside mowing when he became overheated and passed out.  He was taken to the hospital where he was treated for dehydration and was admitted overnight.,1
"An employee helping with solar panel equipment experienced legs cramps, requiring hospitalization for heat exhaustion.",1
An employee became disoriented while out on his route. The employee was hospitalized for dehydration.,1
The employee was positioning metal into a hydraulic press brake and amputated the tip of the second digit on his left hand.,0
"On July 21, 2016, around 4:45 p.m., an employee was processing hardened steel parts in metal baskets from the heat treat furnace when one of the baskets hit and lacerated his right middle finger. The employee was hospitalized.",1
An employee was lifting a box to put on a hand truck and suffered an abdominal hernia.,1
An employee was unjamming the vertical bandsaw and got wedged in a section of the machine resulting in a pelvic fracture.,1
An employee passed out and was hospitalized for dehydration.,1
"An employee exited the rear of a flatbed semi-trailer onto an unpaved county road, and fractured his left tibia and was hospitalized.",1
An employee was hospitalized with a severe injury after falling approximately seven feet from a catwalk to the ground below. The employee was walking from a stationary catwalk to a mobile catwalk at the time of the incident.,1
"An employee working in the deli department was slicing meat when his finger slipped and struck the blade of the deli slicer, resulting in a fingertip amputation to the left pinky finger.",0
An employee stepped out of a trailer truck and fell to the ground resulting in a head contusion.,1
"An employee was chasing a suspect, jumped a fence, and landed on both heels fracturing them.",1
An employee was drilling holes in a part using a Bridgeport mill.  The part moved in the vice and the employee reached in to re-secure the part while the machine was running.  A burr or the drill bit snagged his glove pulling his thumb into the drill bit and causing a partial amputation of the left thumb.,1
An employee was counting inventory and lacerated his forehead on an aluminum wheel.,1
An employee was struck by a vehicle in the parking lot resulting in a broken elbow and ankle.,1
After completing his wing-walking task an employee was walking back to the airport terminal and started to feel fatigued. The employee was admitted to the hospital for dehydration.,1
An employee was operating a chop saw and amputated the right thumb and index fingers.,1
An employee fell from a ladder and fractured their femur.,1
An employee was pushing a plastic pallet with his foot and fell backwards hitting his head on the floor.,1
An employee was pressure washing a roof. The pressure hose ruptured and the employee's upper left arm was lacerated.,1
An employee fell from a height of 46' and was hospitalized with a hip injury.,1
An employee fell approximately 10 feet and suffered broken vertebrae.,1
Two employees were working on a motor to prepare it to ship to a customer. One employee was lubricating and greasing the bearings while the other employee was manually turning the shaft. The employee turning the shaft got his finger pinched between the v-belt and pulley amputating his right index finger just below the cuticle.,0
An employee was cleaning and adjusting the chain on the stationary fixed gear bike (35 pound flywheel) when the towel in his right hand got caught in the chain pulling his right hand in between the cog and chain and amputating the right index fingertip.,0
"An employee was inspecting an air conditioning unit and its surrounding area for mosquito infestation. An air conditioner drain pipe about 2 inches in diameter and about 2 inches off the ground was on the walkway. As the employee went to step over the pipe, the toe of his right foot caught on the pipe. He fell over and hit the ground, fracturing his left shoulder and suffering a minor forehead contusion.",1
"An employee was using a digging bar to loosen sand located over a cable buried in a shunt box when he impacted the primary cable. An electric flash occurred, causing first degree burns on his left forearm and a piece of sand to become lodged under his eyelid.",1
"As the employee was standing with both hands on the JLG lift rail, a lighting strike hit the JLG. The employee was stunned, fell to the ground, and was hospitalized.",1
An employee was struck in the head by a plastic hose that became wrapped around a rotating CNC machine spindle. The hose struck the employee in the head causing a severe laceration. The employee's right pinky finger was also broken and lacerated. The employee was hospitalized for treatment of the head injury.,1
An employee was kicked by horse resulting in fractures to the jaw requiring surgery.,1
"While using a band saw to cut pork chops, an employee amputated the right thumb tip, including portions of the finger nail.",0
An employee was walking in the parking lot and slipped on a puddle of water rolling his ankle resulting in a right ankle injury.,1
An employee was unjamming the cement cylinder gate and amputated his right index fingertip.,0
"An employee tripped on a pipe while walking and fell, hitting their head on the concrete. The employee was hospitalized for a head injury.",1
"While trying to access a room where inmates were located, an employee attempted to open a facility door that had been jammed by the inmates to prevent his entry. When he tried to force the jammed door open, his left pinky finger became stuck between the door and a bar, amputating 1 inch of his finger.",1
"An employee slipped and fell while walking down stairs, fracturing their wrist.",1
"An employee was walking by as a coworker was replacing a pallet jack wheel and hitting a safety pin with a hammer. A metal piece of the pin then hit the employee's eye, resulting in an eye loss.",0
An employee received injuries to his head and eyes when a board struck him due to a kickback from a woodworking machine. The employee was hospitalized.,1
"An employee collapsed due to heat exposure while delivering mail, requiring overnight hospitalization.",1
"After delivering mail on a walking route in extreme heat, an employee became ill and began throwing up. He was hospitalized for heat stress.",1
"An employee was rinsing down the floors and started to transfer milk into the tanks. The conduit for the milk transfer pump was pulled away from the transfer pump j-box and the employee was shocked, causing him to fall to the ground and hit his head. He suffered a head and backside contusion.",1
"On July 22, 2016, at approximately 4:57 a.m., an employee was attempting to clean a jammed chute when a gate closed and pinched his finger(s) resulting in an amputation to his right index finger just past the first knuckle.",0
"An employee was driving a work vehicle when it caught on fire, burning the employee.",1
"While attempting to retrieve garbage from a machine, an employee's forearm was caught and crushed between a pallet lift and the machine frame. The machine was still operating at the time of the incident.",1
An employee lost consciousness while operating light construction equipment due to heat illness and was hospitalized.,1
"An employee had finished rolling and wrapping a deck sheet and was using a hoist with hooks to lift it when he noticed a problem and grabbed the hook. At the same time, the deck sheet came out of the hook on his side. His finger became wedged between the air bar with the rolled deck sheet and the bracket that holds the air bar on the power roller, partially amputating his left ring fingertip.",0
An employee suffered a seizure and fell over a parapet wall that had a 15 foot drop. The employee fractured both heels.,1
An employee was attempting to unplug a sausage grinding machine when the grinder amputated four of his left-hand fingers.,0
An employee was driving a delivery truck and started to feel ill. The employee was hospitalized for heat stress.,1
"An employee was opening a box with a box cutter when she poked her eye with the cutter, requiring hospitalization and surgery.",1
An employee was fixing a water line at the sawmill near the kettle burners and was digging around the line with a shovel when he experienced leg and hand cramps. He was hospitalized for dehydration and heat trauma.,1
While cleaning the interior of a regrind tank an employee sustained a right ring finger amputation and a partial middle finger amputation. The rotating valves were not guarded at the time.,0
An employee was preparing to unjam a machine when the machine cycled and amputated the employee's right index fingertip.,0
An employee was struck by a steel column and suffered a broken scapula. The employee was hospitalized.,1
"On 7/22/16, at 10:30 a.m., an employee was setting up a shear to shear parts and was adjusting the stops. During the setup, the shear cycled and his left middle finger was caught in the pinch point between the bench and the part hold-down, amputating his fingertip.",0
"An employee was climbing down a fixed, industrial ladder and fell approximately 6 feet to the concrete floor. The employee was hospitalized for a fractured right ankle and arterial damage.",1
"An employee was moving a plywood board on the second floor of the building, which is around 12'11"" above the first floor. Immediately after the plywood board was lifted up, the employee stepped into the hole under the plywood board. He fell 12'11"" to the first floor.",1
"An employee was outside on the ground level cleaning up when a coworker on the fifth floor threw trash out the window, which struck the employee in the head.",1
"An employee was operating a forklift when he hit a column and then backed up into another column, breaking his back. He was hospitalized.",1
"A stone fell from a scaffold and hit an employee who was walking under it, causing head injuries.",1
"An employee's right hand got caught in a rolling machine. The ring, index, and middle fingers were amputated to the 2nd knuckle and the thumb tip was amputated.",0
"An employee was walking and caught her foot on a mannequin, causing her to fall to the ground, breaking a hip.",1
An employee was admitted to the hospital after suffering heat stress.,1
An employee was resting and stood up when he heard the truck coming. The employee turned and his left hand was caught in the unguarded sprocket and chain of the concrete truck resulting in the amputation of three fingertips.,1
An employee was injured from electrical shock while trimming a tree. The limb he was trimming fell on a utility wire and he was shocked and suffered a dislocated shoulder.,1
"An employee was operating new vehicles to drive them to designated locations in the shipping area when the employee became light-headed, disoriented, and suffered a migraine due to heat stress. The employee was hospitalized.",1
"An employee was struck by a wine bottle during an attempted robbery of the establishment, suffering multiple lacerations to the head and face. The employee was hospitalized.",1
"An employee was tending to a patient lying in a bed when the employee's body twisted. The employee then tripped and fell to the floor, breaking the left hip.",1
"An employee's hand was caught between a 4 x 4 and the reaction arm on a pneumatic torque wrench, suffering a contusion.",1
"An employee was trying to install a plug on a blender conveyor to stop meat trimmings from going into the blender. Her fingers then came in contact with the conveyor paddle of the conveyor, amputating a portion of the third finger (from the fingernail to the tip) and causing an avulsion to the second finger.",0
An employee was installing form work when he fell and his leg was impaled by a piece of rebar.,1
An employee was hospitalized due to cleaner splashing into the face and eyes.,1
"While running to stop a truck that was moving without a driver, an employee fell and broke his hip.",1
"An employee was operating a crane via wireless remote to move a wrapped coil. The employee noticed the hooks began to slip, so the employee sat down the coil bundle and attempted to remove the paper wrapped around the coil. In doing so, one of the hooks jolted and caught the employee's right index fingertip, amputating it.",0
An employee was attaching the bush hog arm to the tractor hitch. The arm slipped over the hitch and pinched the tip of the employee's right middle finger resulting in the avulsion of the fingertip and nail.,0
An employee reported feeling faint and was hospitalized due to heat stress.,1
"An employee was moving a wire coil next to another wire coil that was being tested. The employee made contact with the coil that was being tested with his elbow and received an electrical shock. He then experienced chest pain and fell to his knees, requiring hospitalization.",1
An employee experienced heat exhaustion/heat stress while performing welding activities in an enclosed area in a 97-degree environment. The employee was hospitalized.,1
"An employee was wakeboarding when he tried to pull himself closer to the boat with the rope. He let go of the rope and it became wrapped around his left ring finger, amputating his fingertip from the first knuckle up.",0
An employee was working in an oilfield cleaning a sand hopper. He got caught in a hydraulic gate fracturing both femurs.,1
"While operating a forklift to load waste modules onto a trailer, an employee fell to the lower level from the docks and suffered a crushed leg, calf, and ankle.",1
An employee was shutting down a breaker when he contacted a 227-volt live wire and was electrocuted.,1
An employee was driving their personal vehicle to a client residence and struck a tree on the side of the roadway injuring their back and both legs.,1
"An employee was on his ladder, replacing a mid-span drop. His ladder was resting on the strand (cable line from pole to pole). When he cut the line off at the mid span (toward the middle of the strand), quick release in tension caused him to fall from his ladder to the ground. He fractured his pelvis and chipped a bone in his ankle.",1
"An employee was using a brake press to form parts. The employee changed the die to flatten forms that were done incorrectly. When the brake press was actuated, the employee's right index finger was amputated to the first digit. The employee also experienced the avulsion of the right middle fingertip.",0
An employee was climbing a cell tower. The employee slipped and the safety climb did not grab. The employee's right ankle fractured.,1
"An employee was working on stilts, hanging sheet rock, when he slipped and fell. He fractured his elbow and injured his hip, requiring hospitalization.",1
An employee was off his lift checking on a pallet of product. A forklift driver was coming toward the employee and did not see him until he was too close. The back of the forklift struck and fractured the employee's right foot.,1
"On 7/25/16, at around 2:30 p.m., an employee slipped and his foot was crushed by construction equipment. He broke his tibia and was hospitalized.",1
An employee was loading and unloading a semi truck with a forklift. The employee got off the forklift when it began to roll and pinned him between the semi truck and the forklift. He was hospitalized with fractured ribs and a punctured lung.,1
An employee stepped on a 7-inch rusty screw while performing roof tear-off activities.,1
"An employee was stocking shelves and opening a box with a box cutter. He leaned down on top of the box cutter, puncturing a vein in his elbow that required surgery.",1
An employee was cutting a 30-inch pipe when it rolled over his ankle and fractured it. He was hospitalized.,1
"On July 25, 2016, an employee was sitting down at a computer station documenting information. When she got up from the station, her right foot became tangled on a cord beneath the desk. She tripped and fell on her left knee, fracturing her femur and requiring surgery.",1
An employee was doing outdoor construction work and cleaning up when he collapsed from the excessive heat and lost consciousness.,1
"An employee was closing and sealing top covers on railcars filled with grain. As the employee descended the railcar ladder, he lost his grip and fell 11 feet to the ground below, fracturing his right tibia and compressing two discs.",1
An employee collapsed due to potential heat illness.,1
An employee had been working outside on the bridge of a highway when he began to feel unwell. He was hospitalized for dehydration.,1
"While laying decking in a steel erection project, an employee fell approximately 17 feet to the surface below, landing on his feet and requiring overnight hospitalization for a crushing injury.",1
"An explosion occurred at the plant and an employee was burned, requiring hospitalization.",1
"An employee was adjusting a halon fire bottle cable when the bottle discharged. His left wrist was exposed to the halon chemical, damaging his arteries and tendons and requiring hospitalization.",1
An employee was closing a chain-link gate when his middle fingertip became caught in the gate roller and was amputated.,0
An employee was preparing to load a truck with water when a valve cap blew off the pressurized system and struck him in the abdomen. He was hospitalized with a laceration.,1
"An employee thought the motor for an interlock had kicked out. When he went to reset the contactor from within a control panel, it arc flashed and caused electrical burns to the employee.",1
"An employee's right index finger was caught and injured while installing a battery into a fork truck. The employee was utilizing a ""hoist"" to lower the battery and bumped the control lowering the battery too fast and pinching his finger.",1
An employee was prepping a load for rigging when a power arc occurred as the employee contacted a power line. The employee suffered an electrical shock.,1
"An employee was standing on an orchard ladder while trimming a bush. He lost his balance and fell 6 to 8 feet onto the asphalt road, breaking his hip.",1
"An employee set up a press brake. The die was in the wrong place, and when the press activated, the die busted and hit the employee in the jaw. The employee suffered a broken jaw and head lacerations.",1
"An employee was taking a billboard sign down when the wind blew the sign, which then made contact with a powerline. The employee was shocked and fell 20 feet to the ground, injuring his nose, hip, neck, and pelvis. He was not tied off at the time of the incident.",1
"An employee's hand was caught in the rebar bending machine, amputating his finger.",1
"An employee lost control of a riding lawnmower he was operating on the side of a hill. 
The lawnmower was slipping downhill toward parked cars. 
The employee dismounted the lawnmower and attempted to stop it when the mower ran over his leg, breaking it.",1
An employee fell 15 feet from a forklift mast while trying to put an overhead door back on its tracks. The employee sustained three broken ribs and an injury to the T9/T10 vertebrae.,1
"An employee fell off and hit the dock while putting freight in a trailer, resulting in shoulder and knee injuries.",1
"An employee was using needle-nose pliers to change a fuse in a switchgear panel when an arc blast/flash occurred, causing flash burns to his right arm.",1
"An employee was carrying a large, rolled rug. A forklift hit the rug that the employee was carrying knocking the employee to the ground. The employee sustained a concussion.",1
"An employee was scraping loose asphalt off the apron of a dump truck containing hot asphalt. The excavator shovel was laying in the bed of the dump truck when the dump truck started to move forward. The dump truck pulled the excavator forward, causing a blade on the excavator to strike the employee, who then fell onto the hot asphalt. The employee suffered severe burns on both forearms, a chipped left ankle bone, and broken bones in the right ankle/foot.",1
"An employee was walking down the stairs and missed the fourth step from the bottom resulting in a fall and pain to the back, hip and left leg.",1
"An employee was transferring a block of frozen dog food weighing 50 pounds when the block dropped on his hand, amputating his left index fingertip.",0
"On July 25, 2016, at 11:30 a.m., an employee was hospitalized with a compound leg fracture after a steel drainage grate that he was carrying fell on his leg as he tripped.",1
"An employee was working on a 15-foot scaffold with zip ties and was bent over conducting work. When the employee raised up from working with the zip ties, the employee suddenly passed out and hit the floor of the scaffold. The employee then rolled off and fell 15 feet to the ground, fracturing ribs.",1
"An employee was pushing a plate compactor into an excavator bucket when his left pinky finger entered the thumb of the excavator, fracturing it.",1
An employee was installing a pin while changing out a bell bucket on a drill rig when the employee's right pinky finger was crushed and amputated.,1
"An employee was validating the work progress at the jobsite when he picked up an available aluminum ladder and climbed to the roof of the business. As he started descending the roof using the ladder, he lost his footing and fell 15 feet to the asphalt pavement below, injuring his right side and head.",1
"An employee was operating the ""Pack Mule"" to pick orders in the warehouse. The employee was hit from behind by another ""Pack Mule"" and was pinned between the ladder and control panel of his ""Pack Mule."" The employee was hospitalized for a broken rib and a punctured colon.",1
An employee lifted a dog onto a table and suffered a possible hernia.,0
An employee was paving a road and fell into hot asphalt suffering burns to his hands and elbows.,1
An employee was moving furniture and started having chest pains and pain in his left arm. He was hospitalized.,1
"An employee was cutting parts on a band saw and cleaning shavings from the machine when his left hand was caught in the blade, amputating the pinky finger and partially amputating the ring finger. The machine was unguarded and the blade was turning at the time of the incident.",1
"On July 26, 2016, an employee was rotating a part on a manual lathe when the rotating piece amputated the employee's right index fingertip and lacerated the thumb.",0
An employee was delivering a pallet of roof shingles to a low-sloped roof using a boom truck with a fork attachment. The pallet of roof shingles slipped off of the forks and crashed through the roof to the interior of the home. The employee was knocked/dragged into the hole along with the pallet. He fell approximately 20 feet to the lower surface and was hospitalized with two broken ribs.,1
"While walking up a slight incline on a concrete surface, an employee lost balance and fell to the concrete, suffering head trauma and requiring hospitalization.",1
"While collecting soil samples, an employee using an ATV struck a cable stretched across a gate opening, suffering chest and neck trauma.",1
A truck ran over an employee who was working in a post hole.,1
"While turning a corner on a motorized power jack, an employee crushed/fractured a foot between the jack and the wall.",1
"An employee was lowering a dock leveler to unload a truck when the dock leveler closed unexpectedly, breaking the employee's finger.",1
An employee was working on the line when he began cramping. He fainted and was hospitalized due to heat-related illness and dehydration.,1
"An employee was knocked off a loading dock by a general purpose container, suffered head injuries from the fall.",1
"An employee was setting a tong on a pipe to break the pipe off from the cutter. A backhoe operator thought he was getting a signal from the flagger to lower the bucket. As the backhoe operator lowered the bucket, it struck the right hand of the employee that was positioned on top of the tong. The employee was hospitalized with a fractured and lacerated right hand.",1
An employee was cleaning a roller and jogging the machine when the machine caught the rag and pulled it and his hand into the machine. His left ring fingertip was amputated and the skin was peeled back.,0
The employee was emptying chocolate from a melting tank and got his right hand caught between the agitator and the wall of the tank amputating his right ring fingertip.,0
An employee was delivering mail when he began to feel dizzy. He was hospitalized due to heat stress and kidney failure.,1
"An employee was cutting loose a temporary support with an angle grinder, equipped with a 4-inch cutting blade to cut a tack weld. The grinder grabbed and jumped towards his left forearm, severely lacerating it.",1
"While performing well servicing operations, an employee became lightheaded and began vomiting. He was hospitalized for dehydration.",1
"While setting up a curing work area, an employee was exposed to extreme heat from the curing operation and steam, requiring hospitalization for heat exhaustion.",1
"An employee was using a crane to empty the scrap bin. As he was lowering the scrap bin's handle, his left thumb was caught between the handle and the steel bin, amputating it at the first joint and requiring reattachment surgery.",0
"An employee was attempting to remove a core from a shaft. The shaft was being held on its end, and the employee had placed his hand on the floor under the shaft when a coworker hit it to remove the core. The employee's fingertip was underneath at the time and was amputated.",1
"An employee was attacked by a dog while delivering mail to a private residence. Her right forearm suffered puncture wounds, fractures, and tendon damage, requiring hospitalization and surgery.",1
"An employee was cleaning a conveyor. The floor of the immediate area was wet due to cleaning. The employee slipped and attempted to catch himself by grabbing the conveyer. His thumb and forefinger became caught in the conveyor, which was operating in cleanup mode. His left index fingertip and thumb tip were amputated.",0
"An injured employee was assisting another employee on the skinning machine. When the second employee turned to move a table, the lid came crashing down onto the injured employee's left hand, crushing the two middle fingers.",1
An employee was struck by a bucket while engaged in cement pouring operations. The employee was hospitalized with pelvic area injuries.,1
An employee was spraying flammable liquid while refinishing cabinets close to a stove when the flame shot back and burned him.,1
An employee's left leg was struck by a car while working at a gas station.,1
"While rolling cans, an employee's right-hand fingers were caught in the roller, crushing/avulsing the fingers and resulting in a possible amputation.",1
"An employee was on a gangway of a transloader. While preparing to load acid into a company chemical hauler cargo tanker, the employee fell from the gangway, approximately 11 feet to 13 feet. The employee was hospitalized with injuries that required surgery.",1
"An employee was conducting maintenance on the HVAC when the wind caused the HVAC blades to unexpectedly move, amputating the intermediate phalange of the employee's right middle finger and the distal phalange of the right ring finger.",0
An employee had been moving tires outside in the grade dock area when he became ill and started vomiting. He was hospitalized for dehydration.,1
An employee was admitted to the hospital after experiencing what appeared to be heat related illness.,1
"An employee was walking on the roof to access the new addition area of an existing commercial building. While walking on the roof, the injured employee fell through a fiberglass panel into the interior of the building. The employee struck a conveyor belt on his way down before hitting the ground 18 feet below. The employee suffered five fractured ribs and a fractured collarbone.",1
"An employee was servicing an oven. As he was leaving after the service was completed, he felt pain and pressure due to a hernia.",1
"An employee was cutting an 8-inch pipe used to carry natural gas when a flash fire occurred, burning the employee's face and hands.",1
"An employee was loading stock material in a CNC machine when the machine became jammed. As the employee attempted to remove the jam, the machine cycled and amputated 1/4 to 1/2 of an inch of the employee's right middle finger.",0
"An employee was putting a stone slab on the transport cart when the crane clamp became caught on the top of the cart and kicked out the slab, which hit and fractured the employee's leg.",1
"While an employee was walking back to his work station, he slipped on a piece of potato that was on the walkway, fracturing his left leg and requiring hospitalization.",1
"An employee was descending a ladder when he fell approximately 5 feet to the ground, landing on his feet and then rolling back and striking his head. He was hospitalized.",1
"An employee was climbing up a ladder to access the roof and inspect the chimney when he fell off the ladder to the ground, fracturing his rib, pelvis, and ankle. He was hospitalized.",1
"An employee was working on a pallet truck when the pallet truck tipped over. The employee was caught between the pallet truck and a stationary object, suffering a back injury.",1
The forklift operator was lifting the bin of tootsie pops. The bin slipped and the injured employee was trying to remove the bin that had fallen when his left index finger was caught between the bin and the steel rail. The left index finger was amputated between the first and second joint.,0
"An employee was fixing a light ballast when he fell approximately 6 feet from his ladder to the ground below, suffering a skull fracture, brain bleeding, two broken ribs, a spinal fracture, and amnesia.",1
"An employee was helping a coworker cut a sick cow out of the pen when the cow attacked the employee. The employee suffered fractured ribs and a punctured lung, requiring hospitalization.",1
"An employee was working from a ladder on an HVAC unit in the ceiling when chemicals spilled on him and burned his skin. He then fell from the ladder and broke his leg and ankle, requiring overnight hospitalization and surgery.",1
An employee was cleaning the batch mixer when the mixer pinched and amputated the fifth digit fingertip on the employee's left hand.,0
"On or about July 26, 2016, an employee was operating a crane magnet while moving four steel billets. The employee lifted two billets from the south end to connect the C-channel to the billets when the force of the magnet caught his hand between the C-channel and the 50-pound billets, fracturing his left thumb.",1
"An employee was walking in the hallway, tripped over a scale, and fell fracturing the upper left arm.",1
An employee was loading stone slab on a transport cart. The crane clamp got caught on the cart and kicked out the stone slab which struck the employee.,1
"On or about July 27, 2016, an employee was opening a bundle of bars on a side loader forklift. The bars rolled off the front of the forks and landed on top of his right foot behind the steel toe. Part of the foot and toes were amputated due to infection.",1
"An employee was trying to open a kennel to put a catch pole around a dog when she tripped and fell. The dog ran through the open gate of the kennel and attacked her, biting her right forearm and elbow.",1
"An employee was pulling bricks off of carts that were being moved forward by a forklift. The forklift operator moved the cart forward while the employee's hands were still on the brick, causing his right hand to smash against the metal surface and amputating his right thumb.",1
"On 07/27/2016, at 01:00 PM, an employee was descending from a pole step after connecting a drop wire when he fell 4 to 6 feet to the grass surface below, suffering an injury between the elbow and shoulder.",1
An employee fell 8 feet though a floor opening into the basement while setting a floor joist. The employee was hospitalized with a broken arm and lower back fracture.,1
An employee slipped off a ladder attached to a farm combine and struck his head on the concrete floor below.,1
"An employee carrying armload of clothing tripped and fell on a new ergonomic mat that was not laying flat on the floor, striking an elbow on the floor. The employee suffered a fractured elbow, which required surgery.",1
"An employee was attempting to help repair a bag machine that was down. When he used a jog button to energize the machine, the cutting blade partially amputated his right middle finger at the first joint. The machine was not locked/tagged out at the time of the incident.",0
"An employee was walking back to the concrete paver when a ready-mix truck backed into him. He was first struck by the chute, and then his lower right leg was run over. His leg broke at the ankle and below the knee, and he suffered a muscle injury.",1
"An employee was working on an outside sand belt when the belt slipped and pulled his hand back, resulting in a left ring finger amputation.",0
"An employee was jacking up a wall and using a ratchet strap during construction activities when the strap came loose and struck the employee's right leg, seriously lacerating it.",1
"On 7/27/16, at 10 p.m., an employee began to feel unwell and experienced cramping in his hands. He was hospitalized due to possible dehydration.",1
A steel sheet struck an employee's left heel while he was unloading material from a truck. He suffered a soft tissue laceration.,1
An employee fainted during farming operations possibly due to heat stress and was hospitalized.,1
An employee became disoriented while delivering mail and suffered leg cramping. The employee was hospitalized with heat exhaustion.,1
"After delivering mail, an employee experienced a headache, cramps, and dizziness due to heat exposure, requiring hospitalization.",1
"An employee was moving cattle when an animal turned and charged him. The animal stepped on him, fracturing his femur bone.",1
An employee was driving a golf cart and hit a tree. He was having chest pain and went to the hospital.,1
"An employee was walking down the hall when he turned a corner and fell, breaking his leg.",1
"An employee was fabricating parts in a press brake. The employee bent a part and the part fell back. When the employee reached for the part, the press was activated via the foot pedal and pinched the employee's middle finger, amputating the fingertip.",0
"On July 27, 2016, an employee was cutting a sewer's lateral pipe in a trench when a backhoe bucket pushed two pipes onto the employee's foot. His left foot was crushed between the pipes, requiring surgery for broken toe bones.",1
"An employee was changing a customer's tire when the tire was punctured, inducing rapid expansion and causing the tire to blow up and strike/break the employee's right arm.",1
"On July 27, 2016, at 5:30AM, an employee was preparing bread to be put in the proofer machine when she experienced dizziness/lightheadedness. She was hospitalized for severe dehydration.",1
An employee was injured when a stack of scaffold fell on him.,1
"At 7:00 a.m., on 7/27/2016, an employee was tripping decking forms when he fell off the 5-foot step ladder, breaking ribs and his wrist. He was hospitalized.",1
An employee sustained an amputation to the right hand while cleaning the rollers of the slitter machine.,1
An employee started having cramps due to dehydration and heat exhaustion while hanging parts ranging from 2 to 30 pounds onto hooks on a paint line.,1
"An employee was helping to unload crane when equipment came down on his right foot, breaking it.",1
"An employee was directing traffic near an area where a structure was being stripped. The employee entered a control zone and was struck by an aluminum beam that fell from that structure, suffering head, face, and chest injuries that required hospitalization.",1
"An employee and his maintenance team were preparing an apartment for a new tenant, which required removing a toilet. As the employee and a coworker lifted the ceramic toilet onto a dumpster, it hit the edge of the dumpster and broke, lacerating his right forearm. He was hospitalized for surgery.",1
A drill stem fell onto an employee's leg as it was being lifted by a crane. The employee sustained a broken leg.,1
"An employee was operating a pipe threading machine, cutting small pieces from large pieces, when his right thumb was pinched between an elbow and the threader, partially amputating his thumb tip.",0
"An employee's fingers contacted the blade of a band saw, sustaining a laceration and requiring a possible surgical amputation. The saw was unguarded at the time.",1
"An employee fell 20 to 22 feet from a ladder while cutting a tie-wire, fracturing a rib and his L1 vertebra.",1
"On July 27, 2016, an employee was using an aluminum saw to cut a piece of aluminum angle. The aluminum became caught in the blade of the saw, and the blade struck and lacerated the employee's left index finger. The employee was hospitalized.",1
An employee was cutting stakes using a skill saw and amputated his left index finger.,0
An employee was working on a vertical mill. The mill was running and the employee's glove was caught by the cutting tool pulling his hand into the machine and injuring the right thumb.,1
"While preparing set props, an employee backed into an unguarded area and fell approximately 10 feet, suffering facial bruises, a right arm radius injury, and a right orbital injury.",1
An employee was running a rib/navel saw in the fabrication department and amputated the tip of the left middle finger.,0
"An employee returned to work on July 27, 2016, after being off since May. He was experiencing cramps although he was keeping hydrated. The employee began to feel worse and experience cramps. He was late admitted to a hospital for potential heat stroke.",1
An employee was tack welding pipe fittings. A 95 pound fitting fell onto the employee's foot breaking the bone of the big toe.  The employee was hospitalized overnight for surgery.,1
"An employee was cutting on a damaged tank when the tank buckled and caused the employee to fall 16 inches face-first onto the concrete surface. The employee suffered a fractured orbital socket, broken jaw, and lacerations.",1
"At 12:30 a.m., on 7/27/2016, an employee was supervising workers loading and unloading products when he experienced dehydration and heat stress.",1
An employee was in the computer room pulling wires while bent over. The employee stood up and struck the back of his head on a shelf causing a concussion.,1
"On July 21, 2016, an employee was hospitalized for dehydration.",1
An employee was setting a rabbit cage on the dock when his finger got caught between the wheel on the cage and the loading dock.,0
The employee was walking from the parking lot to work. She stepped up onto the curb and fell injuring her knee cap and nose.,1
"An employee suffered a hernia while climbing up into a boat to service it, requiring hospitalization and surgery.",1
An employee suffered a right ring finger amputation when the finger was caught between a large metal door on the back of a truck and a metal trash container.,0
"An employee was using a trimmer to cut sections of wood when his hand entered the blade area. At the same time, the blade activated and amputated three fingers on the employee's right hand.",0
"An employee was preparing to install ceiling tiles while working from a 10-foot step ladder. As he attempted to screw into the ceiling tiles, the nail twisted, and he lost his balance while standing on the third rung from the top of the ladder. He fell and broke both wrists.",1
"An employee was working on a parcel sorting machine when the employee's hand was caught between the open track and dragged under the carriage, requiring hospitalization and surgery.",1
"While adjusting two rolls of steel to be welded together, an employee's arm was caught between the two pieces of steel. The employee suffered a broken right arm with tendon damage.",1
An employee suffered a hand fracture and tendon laceration while adjusting a machine and screwing in new screws. The machine was in operation at the time of the incident.,1
"An employee passed out and fell to the ground while climbing a ladder, breaking a femur and requiring hospitalization.",1
"An employee was using a miter saw. As he pulled the miter saw blade down to make a cut, his thumb was in the path of the blade and was amputated below the first joint.",0
"An employee was climbing a ladder to secure a load on a trailer when he fell about 6 feet to the ground, breaking his right ankle.",1
"While using a chainsaw to cut up old poles and trees, an employee was bitten by an unknown insect and had a reaction to the bite. The bite became infected, requiring overnight hospitalization.",1
"An employee was standing by a stationary forklift when a second forklift passed by. The employee was caught between the two lifts, breaking a leg and requiring surgery.",1
An employee laying blocks outside was not feeling well and kept asking for rest and drinks. The employee later experienced cramping and was hospitalized for heat exhaustion.,1
An employee was hospitalized after a forklift accident.,1
"After picking up trash in residential neighborhoods, an employee began experiencing cramps throughout their body and then laid on the ground. The employee was hospitalized overnight for dehydration.",1
"An employee was cleaning the mixer deck. While the employee was tilting the concrete mixer, a steel bar became wedged between the floor and mixer, creating tension on the bar. This caused the bar to pop loose and strike the employee in the face, lacerating the forehead.",1
"An employee tried to free up a cam follower by turning the belt system. The cam follower loosened and turned very quickly, catching and lacerating the employee's right little finger, with a possible fingertip amputation.",0
"An employee was injured when a framing beam came loose from the forks of a forklift and landed on his foot, crushing it.",1
An employee was overcome by carbon monoxide when operating a forklift inside of a cooler.,1
An employee operating a 250-ton model press experienced a left pinky fingertip amputation above the knuckle.,0
"An employee was working on top of a conveyor cover, 3 feet above the ground, when his right foot was caught in a gap between a piece of fire suppression pipe and the conveyor top. He lost his balance and fell while his right foot was still hung in the gap. He suffered a compound fracture of the right lower leg and was hospitalized.",1
An employee was operating a pallet jack when he ran into a pallet. His foot was crushed between the pallet and the pallet jack.,1
"On or about July 28, 2016, at 7:00 a.m., an employee was on the second landing of a scaffold on the side of a building, preparing a chalk line to put a V-groove in a column. When he stood up, he became dizzy and fainted. He fell forward toward the building and onto a brick ledge, fracturing several vertebrae, his left scapula, and several left- and right-side ribs. He was hospitalized.",1
"While driving, a truck driver became ill from exposure to diesel exhaust fumes.",1
"An employee was unjamming a part in a nearby machine when she stepped back into an unguarded robotic material handler. The handler caught her left leg, breaking her fibula and severely lacerating her leg from the kneecap to the ankle. She required surgery.",1
An employee was electrocuted while attempting to change a fuse in the electrical panel.,1
"An employee lost her footing while working in her cubicle and fell to the floor, fracturing her left arm.",1
"An employee was cleaning a blender with the air-actuated discharge valve open for cleaning inside the blender. The employee's right hand was inside the opening with a rag. The switch that opened and closed the valve was bumped, and the valve gate closed on her right hand. The injury was just above the knuckles. She was hospitalized for surgery.",1
"While conducting well-servicing operations, an employee was setting up the work floor of a workover rig. The employee slipped on loose dirt, causing him to lose his grip on the wing portion of the rig floor. The wing portion fell, landing on his left ring finger and amputating the fingertip.",0
An employee was working on the rollers after the tipper belt on a machine and was replacing a band on the drive shaft. He was trying to get the new band on the drive shaft when his right thumb tip was amputated. The machine was running at the time of the incident.,0
"An employee fell and broke an ankle while going down the 12th floor staircase, requiring hospitalization.",1
"An employee was working on a machine with a coworker. The coworker jogged the machine without realizing that the employee's hand was inside. His left pinky was caught by the gears, and his fingertip had to be surgically amputated.",0
"On July 28, 2016, at approximately 10:00 p.m., an employee was on a locomotive that struck a metal plate next to a rail, causing the plate to flip up and strike the employee on the leg. He suffered a fracture to the left ankle area.",1
"An employee's middle finger was partially amputated while using a table saw, requiring reattachment surgery.",0
"An employee was walking and working in the repack area of the facility when he slipped and fell, hitting his head. He suffered a head laceration and skull fracture, requiring surgery.",1
"At 12:00 p.m., on 7/28/2016, an employee was loading trash into the back of a truck when a piece of glass from the trash can cut his left arm, causing blood loss. He was hospitalized and required surgery.",1
"On 7/28/16, an employee was climbing a ladder when he lost his balance and fell to the ground, breaking his wrist and hip. He was hospitalized.",1
"An employee was using a pipe threader to thread a pipe. When the employee released the chuck on the pipe threader, the pipe dropped. The cut end then came up and amputated the employee's left ring finger to the first knuckle.",0
An employee was getting into a car when the driver pulled away before the employee was inside. The employee's ankle was run over and fractured in three places.,1
An employee amputated the right index fingertip when his finger was caught in a moveable platform hinge.,1
An employee was bitten on the hand by a patient. The right index fingertip (soft tissue only) was amputated.,0
"On July 28, 2016, an employee experienced a finger amputation when using a wrench and hammer to clear a jammed rock from a running conveyor.",0
An employee was struck on the right ankle and toes by a passing forklift and hospitalized.,1
"At about 8:45am on July 28, 2016, an employee fell backwards and struck his head against a stationary sheet metal storage rack. The employee was hospitalized with a traumatic head injury.",1
An employee was dumping renderings from a vat when his arm was caught in the machinery.,1
"While installing a refrigerator and pushing it into place, an employee's finger became stuck between the wall and the refrigerator. The employee's right index fingertip was amputated.",0
An employee was helping to place chocks under a rail loaded on a truck. The rail fell off the truck and fractured his left leg.,1
An employee was installing an attachment on a forklift when the attachment fell striking the employee on the head and causing a head injury. The employee was hospitalized.,1
The employee was making delivery rounds and started to feel nauseous and began vomiting. The employee was admitted to the hospital for dehydration.,1
"An employee was climbing a 24-foot ladder to install an area line. The employee was attacked by bees and fell to the ground, which resulted in a broken left ankle and a compound fracture.",1
An employee was overcome by heat and suffered dehydration.,1
"An employee was using a jack hammer that collapsed and fell on his left hand, breaking his middle finger and causing an open wound.",1
"An employee lost his balance while tying his shoe and fell, fracturing a hip.",1
An employee was moving two refrigerators with a pallet jack when the top refrigerator tipped over and landed on the employee. The employee suffered bruises and broken vertebrae.,1
"An employee was standing on the fourth rung of an extension ladder painting an interior wall when he slipped and fell off the ladder to the concrete floor, breaking a vertebra in his back.",1
"An employee was climbing up on the roof with a 10-foot extension ladder while carrying a box of air conditioner filters when the ladder shifted, causing him to fall about 6 feet to the ground. He suffered a muscle strain and bruising in his right shoulder and was hospitalized.",1
Three employees suffered burn injuries in a flash fire on a boat. One employee was hospitalized.,1
An employee was adjusting a lifting hook in order to pick up some rebars and was struck in the head by the hook resulting in hospitalization for a concussion.,1
An employee was struck by lightening while taking shelter inside a canopy building and was hospitalized for burns.,1
"An employee was preparing a bundle of rebar for transport when a banding wire broke and pinned the employee's arm between the bundle and a stack of rebar, causing a right arm fracture that required surgery.",1
An employee was carrying boxes and when he set them down he felt pain. He was hospitalized for a collapsed lung.,1
An employee was standing on the top of a ladder hanging a banner on the side of the truck. He fell several feet from the ladder and broke a hip.,1
"An employee was working in the bucket of an aerial lift to change out a two phase 13.2 KV straight line pole with a two phase pull off. The employee boomed down to get bottled water. The employee was booming back up to finish working on a pole when he made contact with the power line (tap primary) resulting in electrical burns to his left hand, right shoulder, and the right side of his face. The employee was admitted to the hospital and due to the severity of the burns on his left hand it was amputated.",1
An employee was responding to an emergency call regarding an accident on the bike trail. The employee lost control of his bike and struck a tree. The employee was hospitalized for six broken ribs and fluid in his lungs.,1
"An employee was moving a 1,180 lb. steel plate into position to grind the welds using an overhead crane. The crane released the load catching the employee's left foot and crushing it under the load.",1
An employee was walking across the floor when she tripped on her shoe and fell. She suffered a contusion and fracture to her forearm.,1
An employee was pushing a drywall cart. The cart tipped over onto the employee fracturing the right femur.,1
An employee was struck and knocked to the ground by a forklift. The employee's right side was injured.,1
An employee attempted to remove a jam from the exit area of a dye-cutter machine. The machine turned on and the press crushed his right hand resulting in three broken fingers.,1
An employee was working on the rig floor and tripped over an object that he just placed on the rig floor falling to the ground. The employee landed on his shoulder fracturing an arm and dislocating his elbow.,1
The employee was on a forklift and had lowered the pallet of parts to the ground and shut off the forklift. When the employee got off of the forklift and walked around to the front of the forklift she tripped over the fork and fell to the ground resulting in fractures to both her elbows. She was admitted to the hospital for surgery.,1
An employee was pulling a pallet truck and felt discomfort. The employee was later hospitalized with a collapsed lung.,1
"An employee was walking around a corner, tripped over a box and fell breaking a hip.",1
An employee was hospitalized for heat related illness.,1
An employee amputated the left middle fingertip while cleaning a mixer.,0
The employee was stocking merchandise and fell off the ladder breaking the left shoulder and knee.,1
The employee was topping a log on the ground. The log moved and struck his leg above the ankle fracturing the lower leg.,1
The employee was lifting a long box that weighed more than 50 lbs. onto a storage shelf. The employee felt a pop in his right abdomen. The employee was hospitalized for a possible hernia.,1
"An employee and his co-worker had completed maintenance work on the green chip bin machine when they noticed that a guard was not properly installed. When the employee tried to properly re-adjust it, the guard made contact with a moving part thereby shifting the guard. The employee's right thumb was caught between the guard and a handrail. He was admitted to the hospital where he was treated for his broken right thumb.",1
"An employee was assigned to install a small hydraulic cylinder at 6 Clean #1 Payoff hold down roll. The employee had the cylinder in place on the blank end clevis with the pin inserted. While the employee was lining up the rod end clevis, their right hand pinky finger was partially inserted in the pin hole. When the cylinder dropped, it struck the tip of the employee's gloved finger resulting in amputation of an eighth of an inch of the finger. The amputation did not include bone.",0
An employee was admitted to a hospital with a broken clavicle after falling from a ladder while exiting the top of an aircraft.,1
"An employee was loading a bulk flour trailer. A loading cap came off the trailer under pressure and struck the employee in the face resulting in facial lacerations, a nose fracture, and broken teeth.",1
An employee was gauging tack welds when the strong back plate fell on the employee's left leg. The strong back plate holds 2 base plates together while they weld.,1
"On July 30, 2016, an employee suffered an arm amputation while working on the 550 ton press.",0
An employee was pinned between a railcar and the handrail of a transfer cable while switching railcars resulting in internal injuries.,1
An employee was setting up the machine in the converting department when his hand got caught in the nip roller crushing his hand. The employee was admitted to the hospital for surgery to repair the injured hand.,1
An employee was bitten by dog.,1
"The worker was performing a demonstration event. She walked over to the produce section to get grapes for her demonstration. She was in front of the grapes, reached for an item, turned to go back to her demo cart and fell onto her right side, fracturing her right hip.",1
An employee was using a utility knife to cut cardboard strips out of a full sheet of cardboard and amputated the left ring fingertip.,0
An employee was hospitalized with multiple arm fractures when his hand was caught between two rollers.,1
An employee was troubleshooting a CD 4.2 muffler pack machine when it was cycled resulting in the amputation of the left middle fingertip between the frame and machine arm.,0
"An employee slipped on ice in the freezer and fell, sustaining an injury to his ankle.",1
"An employee's foot was caught in a hydraulic steering component on board a docked vessel, crushing it.",1
An employee's hand was crushed while engaging the locking clamp device on the baler door.,1
"An employee was putting on a metal elbow and fell, fracturing the right leg.",1
An employee was feeding tube into a straightener machine and their hand was caught in the machine. The right ring and pinky fingers were amputated above the knuckle.,1
An 8-inch pipe weighing approximately 500 lbs. rolled and landed on an employee's right leg resulting in a broken tibia and fibula.,1
An employee was backing up the stacker truck with his left hand on the control lever when he pinched his left pinky finger between a rack and the stacker truck control lever resulting in the amputation of two-thirds of the pinky finger.,0
"While resetting the pressure switch on an HVAC unit, an employee lacerated their finger.",1
An employee was inspecting a conveyor belt. The conveyor restarted and amputated three fingers.,1
An employee was bitten by a copperhead snake while moving a dolly to a storage room. The employee was treated with antivenom and admitted to the hospital.,1
An employee was on a pitched roof. The employee slipped and fell sliding several feet off the roof resulting in back injuries and lacerations.,1
An employee was inspecting a crane from a scissor lift when the crane moved and the load block struck the lift. The lift tipped over and the employee fell to the ground sustaining a head injury.,1
An employee was hospitalized with chemical burns during a concrete cutting operation.,1
"An employee was replacing wall panels in the maintenance shop. While the employee was removing one of the wall panels, a panel fell on the employee's left hand.",1
An employee became ill and was hospitalized due to dehydration from possible heat exposure after working with patients to get them connected to their dialysis units.,1
"An employee was walking toward the back of the store when the employee tripped over an empty rack and fell, fracturing the left shoulder.",1
An employee fell to the floor and suffered a hip fracture.,1
"An employee was using a sliding table saw to cut wood when the wood kicked back, causing the saw blade to amputate the employee's left index finger.",0
"An employee was laying down sheathing and securing it to the trusses when he fell through an opening, landing on the pavement below. He fell approximately 14 feet, suffering head and back trauma and requiring hospitalization.",1
"An employee was walking to the shop when his right knee gave out and he fell to the concrete floor, fracturing his right hip. He required surgery.",1
"An employee was screwing fasteners into duct work while standing on a ladder. He lost his balance and fell approximately 11 feet, cracking a rib and breaking his right heel.",1
An employee was getting a sample brick from the brick stack when bees came out of the stack. The employee then dismounted the stack and broke his ankle and lower leg.,1
An employee tripped on a concrete block display and broke her right femur.,1
"An employee was removing freight in the back of a trailer when the freight slipped from the back of the trailer. The employee fell out of the trailer and landed on the ground, and the freight landed on top of him. He suffered back and rib injuries.",1
"While decking on the roof, an employee became overheated and required hospitalization for heat exhaustion.",1
An employee suffered a possible heat related injury.,1
"An employee was walking in the employee parking lot when she tripped over a clothes hanger on the ground and fell to the concrete, breaking her left arm.",1
"An employee was preparing to sterilize several hock cutter parts. While the employee was placing the parts into the sterilization container, the employee's left index fingertip was amputated.",0
"An employee was checking the hoses in the steam rack area. When he began to climb the ladder, he fell approximately 1 foot to the concrete floor, fracturing his skull and back.",1
An employee was tack welding with an automatic MIG welder. The employee was holding the steel part with one hand and engaged the pneumatic clamp with the other hand. The clamp smashed and amputated his left middle finger.,1
"An employee was attempting to make a delivery to a store when he was struck by a third-party truck. He suffered multiple fractured ribs, a torn diaphragm, bleeding, and abdomen injuries.",1
An employee was cleaning underneath a band saw when his left-hand pointer and middle fingers were partially amputated by the saw blade. The saw was running at the time of the incident.,0
"An employee and a coworker were trying to hitch a cube wagon to feed cattle. The hitch would not latch onto the ball of the vehicle, so the employee used his finger to check what was causing the problem. The hitch latched onto the ball while his finger was caught in between, amputating his left index fingertip.",0
An employee collapsed at the end of a shift and was admitted to the hospital and treated for heat stroke.,1
An employee was using a 12-foot step ladder when the pin on the ladders bracing broke causing him to fall to the ground. The employee suffered cracked ribs and a fractured coccyx.,1
"On 08/01/2016, an employee was working on a 12-foot ladder gluing PVC pipe onto the ceiling when a brace on the ladder broke, causing the employee to fall 12 feet to the floor. The employee suffered broken ribs and a fractured pelvis.",1
"A winding shaft on the slitter machine was cutting larger rolls into smaller rolls when an employee noticed there was a wrinkle in the material. When he tried to correct the wrinkle, his left arm was caught between the winder and the material, breaking it. The machine was running at the time of the incident.",1
"An employee was turning on the switch to a scrubber fan pump when the fan pump's pipe burst, causing the chemical inside the pipe to splash on and burn the employee's right arm.",1
"While clearing a buildup of rolls on a conveyor, an employee's right-hand ring finger was caught between the conveyor and a stationary object, amputating the first distal phalange.",1
"On or about August 1, 2016, an employee was helping to remove a piece of equipment from the wellhead using a crane. The piece of equipment fell and struck the employee's left leg, fracturing it.",1
"An employee lost control of her power equipment/double jack, and her right leg/thigh was pinned between a rack and the double jack. The impact and pressure severely cut her right leg just above the knee to her inner thigh.",1
"An employee was bending rebar when the rebar-bending table he was working at activated while his finger was in the danger area. His left pinky finger was pinched between the machine and the metal rebar, amputating it at the first knuckle.",0
"On August 1, 2016, at approximately 8:40 p.m., an employee was cutting material with a utility knife.  His hand slipped while holding the knife and he cut his wrist, lacerating an artery.",1
"On or about August 1, 2016, an employee's left hand was smashed while setting a die into a tilt pour machine, crushing four fingers.",1
"An employee was installing a ductwork hanger while working about 14 feet from the ground level on the metal trusses. He fell 14 feet from the trusses, injuring his head and breaking his ribs, shoulders, and back.",1
"An employee was operating a forklift. When he went to pull the cord to activate the door opener, his right hand became caught in the cord. As he moved forward, his ring fingertip was caught and amputated between the cord and the roll cage on the forklift.",0
"An employee was retrieving items from a car when the door closed on his left index finger, amputating it below the nail.",0
"An employee was operating a press to remove a cylinder rod from a piston when a spring released its tension, causing the employee's finger to be caught between the piston and the press. The employee's right index finger was amputated up to the first knuckle.",1
"On August 1, 2016, at approximately 10:00 a.m., an employee was driving a stand-up rider forklift at a cold storage facility. As he was turning to exit the freezer, his glove became caught in the steering wheel and he lost control of the forklift. He was thrown from the operators' platform and became pinned between the forklift and a bollard post located at the freezer door opening, fracturing his pelvis.",1
An employee fell approximately 8 feet down an extension ladder. He landed on a rock and broke bones in his foot.,1
"An employee collected a sample cylinder of gas and was placing the cylinder into a weather guard job box that is used to organize the sample cylinders. The job box drawer closed on his left hand, amputating his left ring finger at the first joint, right below the nail.",0
"An employee tripped and fell. As she was getting up from the fall by grabbing onto a tire rack, another tire rack shifted and crushed her left hand. Her middle, ring, and pointer fingertips had to be medically amputated.",1
An employee's thumb tip was amputated while feeding wire into a crimping machine.,0
"An employee was bending pipe when his thumb became pinched between the pipe and the bender shoe, amputating his thumb tip.",0
An employee in an aerial lift was installing sandwiches between precast panels when the panels collapsed and fell on top of the lift. He suffered a broken leg and wrist.,1
"An employee was securing a stand of drilling pipe with a chain wrench when the wrench broke and hit his hand, breaking his wrist and finger.",1
"An employee was standing on a portable stand rehanging beef in the cooler when the stand was bumped, causing the employee to fall to the floor below and suffer a fractured L2 vertebra.",1
An employee suffered a partial amputation of the right pinky finger and injury to the right ring finger while attempting to clear a paper jam in a machine.,1
An employee was walking back to his truck in the yard while carrying some material when he was struck by a coworker operating a powered industrial truck. He suffered pelvic and ankle injuries.,1
An employee slipped on wet wood and fell about 4 feet to the ground while inspecting a wooden bridge. The employee suffered a broken little toe on the left foot and broken left pinky finger.,1
"On August 1, 2016, an employee was cleaning the outside of a tanker truck when he became overheated. He was hospitalized with heat exhaustion.",1
An employee was stung in the lip twice by a bee while removing brush at a site.  He was hospitalized after suffering an allergic reaction.,1
An employee was working along the exterior east side of the building when an unknown assailant stabbed the employee with a knife. The employee was hospitalized for surgery.,1
"Stacked bales of cardboard fell on an employee, injuring him. He was hospitalized overnight.",1
"An employee was helping a coworker change out a plug catcher. After re-inserting the screen, the employees attempted to attach the connection. As the connection cap was pushed forward to prepare it for threading, the loose bolts on the cap allowed for significant play and crushed the employee's left thumb between the cap and flange bolts. The employee's left thumb was partially amputated below the fingernail.",0
An employee was pinning fence material together when he began experiencing cramps. He was hospitalized with a heat injury.,1
An employee was hospitalized due to heat stroke and dehydration.,1
"An employee was carrying a concrete cap when the cap slipped and struck the employee's left forearm, resulting in an open fracture.",1
"An employee was investigating a blockage in the hopper system. While closing the hopper's dryer door, the employee suffered amputations to the left-hand ring, middle, and index fingertips.",1
"An employee fell 35 feet while snapping bolts, suffering broken ribs and bruised lungs.",1
"An employee was dumping a load of waste when he fell into the solidification pit, suffering burns.",1
"On or about August 2, 2016, at approximately 3:30 p.m., an employee was helping to install roofing underlayment when he stepped on wet membrane material and slid off the roof, falling more than 12 feet to the ground below and lacerating his head and tongue.",1
"An employee was descending a ladder when his right foot slipped. He fell approximately 2 to 3 feet from the third step from the bottom to the concrete floor, breaking his right hip.",1
"An employee was standing by a concrete pump when a hose connected to the pump broke loose and struck the employee in the face, causing a laceration and nose fracture.",1
"An employee had delivered mail to a mailbox at the front door of a home. As she turned away, two dogs appeared and attacked her, biting her head, right and left arms, and right and left legs.",1
An employee was cutting a tree into smaller pieces when he began to feel ill. He was hospitalized for heat exhaustion.,1
"On 08/02/2016, at about 5 p.m., an employee began to feel ill and was hospitalized with a heat-related illness.",1
"On August 2, 2016, at approximately 5:15 p.m., an employee who had been welding pile splices and performing pile-driving work began to feel ill and lost consciousness. The employee was hospitalized for heat-related illness.",1
An employee was conducting maintenance on a baler when the baler's plunger struck his back. He was hospitalized.,1
"While delivering mail to a residence, an employee was startled by a dog and tripped while retreating. The employee fell to the ground and suffered back trauma.",1
An employee was removing a twisted belt from a motor. A finger got caught between the belt and pulley amputating the employee's middle fingertip.,0
An employee was doing maintenance work when a corrosive dip tank solution soaked into the employee's glove and caused burns to the hand.,1
"On August 2, 2016, an employee was manually molding with a 20-pound ladle of aluminum when he began to experience muscle spasms. He was hospitalized with heat exhaustion.",1
An employee was removing 3 feet of cut-up log from the sawmill floor when two fingers on his left hand were pinched and broken by the logs.,1
"An employee was adjusting a washer machine when the heavy metal door fell off and hit his leg, causing a leg injury.",1
"An employee tripped over a newspaper rack and suffered a broken hip, requiring hospitalization.",1
"An employee was performing maintenance on a plastic grinding machine. As he was attempting to dislodge a plastic piece in the machine, his left ring finger was caught between a belt and pulley, amputating the fingertip.",0
"An employee working at a powerhouse was splashed with a caustic solution made up of water and drain cleaner, suffering chemical burns.",1
"An employee was operating a foam-cutting machine. After completing the cuts on the foam material, the employee was moving away from the machine and was electrically shocked by it, suffering right hand and arm injuries that required hospitalization.",1
"An employee was scanning boxes when an unload device roller rolled over her hand, amputating her left index fingertip.",0
"An employee fell approximately 10 inches from a pallet jack, suffering a sacral spine injury.",1
An employee drove off the road while delivering shingles with a forklift. The forklift overturned and crushed the employee.,1
"An employee was grinding on a machine. When he attempted to grab the metal part being worked on, his left ring finger was amputated at the first knuckle.",0
"An employee was supervising the loading of a coil onto a truck from the designated safe zone when the 500-foot, 4-inch coil weighing approximately 1,250 pounds began to slip off the spool that was being lifted by a forklift. The employee tried to push the coil back onto the spool when the coil struck him, knocking him to the ground and cracking his vertebrae.",1
"An employee was at a client's jobsite sweeping up debris in a new room addition to a home. He stepped onto an area that was covered with sheetrock and fell 14 feet to the lower level onto a staircase below, hitting his head and breaking his ankle.",1
An employee was teaching tennis class when his knees gave out and he fell. He ruptured both patella tendons in both knees.,1
"On 8/2/2016, an employee and a coworker were moving a piece of equipment onto a wooden block. The employee's left index finger was pinched between the equipment and the wooden block, partially amputating his fingertip.",0
"An employee was standing to the back, left side of a forklift that was moving totes. The forklift operator backed up and ran over the employee's right foot, breaking his fibula.",1
"An employee was performing a task involving electrical connections when an electrical arc flash occurred, causing second and third degree burns to his upper body. He was hospitalized.",1
"While opening a dock door, an employee slipped on a wet dock plate and suffered a severe laceration from the heel to the calf, requiring hospitalization.",1
An employee was using a belt sander to remove burrs on a piece of sheet metal when his thumb became caught and partially amputated between the sander and sheet metal.,1
"On or about August 2, 2016, an employee was sawing pieces of plastic with a band saw when the blade lacerated his left-hand index finger, requiring hospitalization.",1
"An employee who had been installing pipe was descending a ladder when he blacked out due to heat exhaustion and dehydration. He fell to the ground (approximately 8 feet), breaking his shoulder and requiring hospitalization.",1
"An employee was ejecting a bale from a baler. He was standing in front of the bale while pushing the button to eject it. The bale began to come out and his right ankle was caught underneath it, breaking his right lower leg.",1
An employee was completing a rig down and had finished cementing. He was attempting to remove the cement plug of the plug container by lowering the plug to the ground using a wench. The plug shifted and the employee's left wrist was caught between the drill pipe and the manifold on the plug container. The employee was hospitalized with a dislocated left wrist.,1
"While cleaning out a grain silo, an employee contacted a running auger in the floor, tearing four leg ligaments.",1
"After initially cutting their left index finger with a knife in the deli department, the employee's finger was amputated due to infection.",1
"On 8/3/2016, at 1:00 p.m., an employee was holding a boat board with her left hand and using a utility knife to cut it. She slipped and partially amputated her left thumb, requiring stitches.",0
"On August 3, 2016, at 1:15 AM, an employee was operating a part revolution stamping press when her right middle and ring fingertips were amputated at the nailbed.",1
"An employee was using a pneumatic grease gun to grease a trailer chassis when the gun began to malfunction. As he lifted the unit attached to the grease drum to troubleshoot the problem, his left hand slid. The moving piston then amputated his pinky fingertip between the first and second knuckle.",0
An employee was positioning an air tank for installation using an overhead crane when his thumb was pinned between the frame and the tank's mounting leg. The distal tip of his left thumb was amputated.,0
An employee was using a meat saw to cut meat when his hand slipped and his right index fingertip was amputated by the saw.,0
An employee was working on a barge when he became ill. He was hospitalized for dehydration.,1
"An employee on a ladder was shocked while installing circuits in an electrical junction box. The employee fell off the ladder and suffered a head injury, requiring hospitalization.",1
"An employee was walking to the building when he tripped on the uneven surface and fell to the ground, injuring his back.",1
"An employee was ground handling a helicopter on the aircraft flight line. He was walking beside the helicopter when the helicopter wheel rolled over his left foot, ankle, and lower leg, causing compound fractures to his tibia and breaking bones in his foot. He was hospitalized and required surgery.",1
"An employee fell 22 feet to the ground while placing decking, suffering a broken pelvis, elbow, wrist, and nose.",1
"An employee was carrying a door frame and door when it slipped and fell, bending the employee's right index finger backward and dislocating it. The employee required surgery.",1
"An employee suffered from heat exhaustion while performing metal framing on a new construction prior to installing drywall, requiring hospitalization.",1
"An employee on a ladder was applying flashing to a roof that was 17 feet high when the flashing ignited. The employee dismounted from the ladder and fell to the ground, fracturing the tailbone.",1
"A car drove into a store and struck an employee, who suffered a broken leg.",1
"After stocking a shelf, an employee fell while descending a 4-foot step ladder, fracturing the left leg/knee.",1
An employee was clearing out refractory outside of a hopper when ash from above poured out and caused first and second degree burns to the employee's neck and legs.,1
"An employee smelled chlorine when he entered the chemical room. He flushed the floor drain to eliminate the smell. He notified his supervisor about the smell, and the two of them flushed the drain with multiple barrels of water. After they had flushed the drain, the employee started to experience wheezing and had a slight headache. He was hospitalized due to lung/respiratory irritation.",1
"On August 3, 2016, at approximately 5:30 p.m., while moving from one site on the vessel to another, an employee crawled to the edge of a hatch opening, crawled over the pipe railing, and fell 8 feet into the cargo hold. The employee injured four ribs and suffered a shoulder contusion and a possible bruised lung.",1
"After spending all day installing a fence, an employee became ill and was hospitalized due to dehydration/heat exhaustion.",1
"On 8/3/16, an employee was leaning glass sheets on a truck rack toward himself to identify/inventory loaded sheets when he lost control of the stack, which fell over and pinned him between the glass load and a hard object. The glass broke and lacerated his head and knee.",1
"An employee was caught between the load bar of a trailer truck and a stack of plastic dairy cases, losing consciousness and requiring hospitalization.",1
An employee was operating a table saw using an 8-inch blade to cut a piece of wood. The wood piece became caught in the blade and was pulled in along with the employee's left index and middle fingers. His left middle fingertip was amputated.,0
An employee became stuck in the hot tar and was struck by paving machinery while working on the highway.,1
"An employee was helping to discharge fuel from a barge by positioning a C-hook on a coil. After he slid the C-hook into the coil, his hand rested on the bottom of the C-hook. When a crane began to lift the hook, the coil and his fingers became caught, crushing his left-hand pinky, ring, and middle fingers.",1
An employee was installing wind-ties between trusses on a new construction building when he started noticing cramping in his right arm. He was moved to a shady area to rest when he started vomiting. He was hospitalized due to dehydration.,1
"An employee finished up on a rig cap on a new roof he helped install. He unhooked from the crane lift and reached over to hook his D-ring to the beam when he slipped and fell approximately 12 feet to the ground below. He dislocated his shoulder, fractured a rib, and suffered facial abrasions.",1
"While on patrol, an employee noticed two males fighting and observed that one of the males needed medical attention. The employee approached the male, who became agitated and entangled with the employee. The male fell on the employee's ankle and broke it.",1
"An employee was operating a machine to load wood slabs for processing into doors. As the employee was attempting to remove cardboard from the bottom of the slab being handled, the machine clamped onto the slab. The employee's left middle and ring fingertips were crushed and amputated between the slab and the clamp. The employee was hospitalized.",0
"An employee fell to the ground as he was transitioning from a ladder to the roof, breaking ribs, fracturing vertebrae, and lacerating his head.",1
"While taking the trash out, an employee slipped and fell on the concrete and received abrasions on her arm. She later started coughing up blood and was hospitalized.",1
"On or about August 3, 2016, the wire rope on a rigging system broke, allowing a hinge pin to fall about 20 to 30 feet and strike an employee's left arm.",1
"While roping cattle at a team roping event, an employee's right thumb became caught in the rope and was amputated.",1
"An employee was closing a bin door when a chain attached to the bin became caught on a 4-feet x 8-feet x 3/4-inch sheet of steel plate that was leaning against the wall behind him. When he pushed to close the bin door, the chain pulled the steel plate onto his left lower leg, causing a compound fracture.",1
"An employee fell backwards while using a dolly to go through a doorway with a stack of boxes, suffering a fractured hip and requiring hospitalization.",1
"An employee was troubleshooting a light fixture when he came into contact with an energized circuit. He was working from a scissor lift at a height of approximately 19 feet. After the shock, he fell out of the scissor lift and landed on the concrete surface below, suffering multiple fractures and requiring hospitalization.",1
"While working on a piece of equipment, an employee fell through a second-story hole in the floor to the concrete below, suffering a skull/facial fracture.",1
An employee was flushing a process line with pressurized steam when the sight glass shattered. The glass cut his abdomen and was embedded in his right forearm.,1
"An employee was up in a tree trying to install a meat-hanging pole. The employee fell to the ground, suffering a fractured arm and spine.",1
"An employee was cleaning the air tank of a semi truck with steam when hot water released and sprayed him, burning his left arm, chest, and back. He was hospitalized.",1
"An employee was working on a machine and jogging it to perform maintenance. The jog button was activated and the machine engaged, pinching and amputating the employee's left ring fingertip in the point of operation.",0
"An employee had a steel beam suspended from an overhead crane and was attempting to lower it onto the ground. He had one hand on the end of the beam while his other hand held the remote control for the crane. While moving it to the saw area, he stepped on a stack of beams. The top beam tipped over and landed on his right foot, fracturing three bones.",1
An employee was installing an A/C duct panel when the component fell and lacerated his left forearm.,1
"An employee was using a high-pressure water line (6,000 psi) lance to clean out a tar line when the lance kicked back and lacerated his neck and upper chest. He was hospitalized and required surgery.",1
"An employee was leaving a mobile tool trailer when the door broke and caught his right index and middle fingers, amputating his fingertips.",0
"An employee was performing maintenance on a trimmer saw. When the employee removed the chock block, the saw blade rotated, amputating a centimeter of his index finger (no nail or bone loss) and avulsing his middle finger.",0
An employee fell on equipment while doing mill work and punctured a lung.,1
"After securing a load to truck, an employee became disoriented and experienced full-body cramps. He was hospitalized for heat exhaustion.",1
"An employee was bending and cutting rebar on a rebar bending machine when the machine cycled twice, causing the rebar to bend twice. The rebar punctured the employee's right foot, fracturing the fourth metatarsal.",1
An employee was climbing up the third or fourth rung of a ladder when he fell to the ground and hit his head. He was hospitalized with a fractured vertebra.,1
An employee's finger was caught and amputated in a hydraulic gate lift.,0
"An employee operating a forklift stopped because he thought the forklift was overheating. When he removed the radiator cap to check the water level, the hot water caused first and second degree burns to his chest and right arm.",1
"While cleaning asphalt stuck to the bottom of a truck bed with a shovel, an employee suffered heat stress and was hospitalized.",1
An employee was looking for a vacuum when he slipped and fell on some water on the floor from a leaking ice cooler. He was hospitalized with a left leg injury.,1
An employee slipped from and fell 11 feet from the top of a railroad tank car to the ground. The employee fractured both heels and the left wrist.,1
"While using an electric pallet jack to move a pallet between racks in the back warehouse, an employee's right thumb was smashed and partially amputated between the pallet jack handle and a warehouse rack.",1
An employee was handling baggage containers when his right-hand middle finger was crushed by two aluminum baggage containers.,1
"An employee tripped and stepped into an open manhole. He fell across the manhole, fracturing two ribs and puncturing a lung.",1
An employee was emptying the trash and cleaning off the compactor when the compactor activated and caused two fractures to the employee's left hand/finger.,1
"While attempting to put the chain back on a cartoner machine, an employee's fingertip became caught in the chain and sprocket and was amputated.",0
An employee was hospitalized for heat stress symptoms while conducting rig down operations.,1
An employee was placing a tube in a clamp for a drill press when the clamp closed on and crushed her lefty pinky finger.,1
"An employee tripped on an electrical cord and fell, fracturing her left hip and requiring hospitalization.",1
An employee and coworkers placed a metal bed frame on a wall. The metal bed frame slid and landed on the employee's head and upper back. She was hospitalized with a contusion on the back of her head and upper back.,1
An employee was trapped under a coil of steel that fell on the employee's foot resulting in the amputation of his foot.,0
"After working in the heat, an employee was riding with his coworkers back to the company yard when he began to feel sick. He was hospitalized with stomach pains and possible heat-related injuries.",1
"An employee was cutting tree limbs from a 6 foot A-frame ladder when a limb hit the ladder. He dismounted the ladder 2 feet off the ground, breaking his right leg and requiring hospitalization.",1
"After performing environmental duties outside, an employee was hospitalized due to dehydration and heat exhaustion.",1
"On 8/4/2016, an employee was using a sand blaster when a chain broke and fell on his toe, amputating it.",0
An employee fell off a roof and was hospitalized.,1
"An employee's left hand slipped while grinding a water meter casting, and the grinder cut the employee's little finger.",1
"An employee fell 4 to 5 feet off a scaffold to the ground while preforming masonry work, suffering a hip/rib injury.",1
"An employee was walking from one location to another and needed to step over a small foundation wall. His foot became caught on a wire and he tripped and fell 1.5 feet, fracturing his tibia.",1
"An employee was driving a tractor pulling a stainless steel trailer containing a chemical solution when he felt an explosion from the trailer. He exited the tractor and was engulfed in fumes, causing loss of eyesight, difficulty speaking, and chest and throat irritation. He was hospitalized.",1
"An employee was cutting a drum with a torch. After he made the cut, the drum panel fell on and injured him. He was hospitalized.",1
"On or about August 4, 2016, an employee was transferring a tray of mail to the mail truck when the carrier stepped off a curb, felt a snap in the left ankle, dropped the tray of mail, and fell to the ground. The employee's ankle fractured in three places.",1
"While removing a flex hose from a machine, an employee's hand slipped and contacted a moving part. The employee's left-hand index and middle fingertips were amputated.",0
An employee was cleaning a piece of metal on a belt sander when the metal piece slipped out of the employee's control and came back to amputate his fingertip.,0
"An employee was repairing a backhoe using a pry bar to adjust the cylinder. The pry bar slipped and the cylinder landed on his left pinky finger, smashing and amputating the fingertip.",1
An employee was applying pesticide outside a warehouse. A PIV exited the warehouse and ran over the employee's foot.,1
"An employee was on a ladder inside of a trailer, attempting to correct the tension on the door. When he released the tension, the door knocked him off the ladder. He suffered fractured ribs and air outside of his lung.",1
"An employee slipped on a spill on the floor while walking behind the donut counter. The employee hit their head and suffered a brain contusion, requiring hospitalization.",1
"An employee was preparing to load a truck of emulsion. While he was lowering the stairs, the truck's loading arm drifted, catching his hand between the loading arm and spring mechanism. His ring finger was partially amputated.",0
"An employee was helping a coworker unload drums using a drum dolly. The coworker had secured the 800 lb. drum to the 1000 lb. capacity drum dolly. As the coworker attempted to tilt the drum dolly back, the employee placed his hand on the back side of the drum. The drum then slipped off the dolly, which in turn fell back into place and caught the employee's hand between the drum being lifted and another drum that was still on the truck. The employee suffered a partial amputation of the right middle and ring fingers.",0
"An employee was standing/kneeling on top of a flatbed trailer when a forklift operator sat a 500-pound A-frame onto the trailer. The A-frame fell onto the employee, pinning him underneath and breaking five vertebrae.",1
"On Thursday, August 4, 2016, at 11:30 a.m., an employee was working outside, marking a new engineered path with flags for an underground service drop from the electrical pole to a relocated electric meter at a new residential construction site. As the employee was walking toward the electrical pole, the adjacent ground grading changed; it was partially graded and partially undisturbed natural landscape, creating an uneven walking surface. Subsequently, the employee's right ankle rolled and she fell to the ground, fracturing her ankle. She was hospitalized overnight for surgery.",1
"A stack of acrylic plastic sheets fell on an employee, fracturing both of the employee's ankles.",1
"An employee was trying to remove a mold by hitting it with a mold leg. His hand slipped and his left ring finger was caught between the mold and the mold leg, fracturing it.",1
"An employee was cleaning a short weight tumbler machine when her hand was caught between the machine, amputating part of her thumb and breaking several bones in her hand.",1
"An employee was making copies when he tripped and fell against another copier, breaking his hip.",1
"An employee was injured by a moving forklift while picking up goods at a site, suffering broken ankle bones.",1
"An employee was moving a ladder out of the path of a lift truck operator when the lift truck ran over the employee's left foot, breaking it. The employee was hospitalized for surgery.",1
An employee was flagging for traffic control when a tandem dump truck struck her and ran over both of her feet. Her left foot was fractured and bruised.,1
"An employee was changing the rolls on the slitter and had the slitter roll hoisted with a crane. The roll was crooked/off balance on one side, which caused the sling strap to loosen. As the employee straightened the sling strap, the roll dropped down and struck his fingers between the sling strap and the roll. His left-hand ring and middle fingertips were surgically amputated.",1
An employee was descending a steel ladder when he slipped and hit his knee on the hand rail of the ladder.,1
"On August 4, 2016, an employee tripped over a projector's flexible cord, fell into a door, and struck their head, requiring hospitalization for head trauma.",1
An employee was talking with a coworker when he suddenly fainted and experienced seizures. He was hospitalized with heat-related illness.,1
"An employee had just cleared a jam in a conveyor when he turned left to walk away from the conveyor while his right hand was still resting on the guard. His right hand slipped and made contact with the conveyor, and his right pinky and ring fingers became caught between the roller and the fixed roll. His right ring fingertip was amputated, and his right pinky finger was fractured.",0
An employee was leaving the cooler in the meat department and slipped on the wet floor breaking an ankle. The employee was admitted to a hospital for his broken ankle.,1
"On August 5, 2016, at 1:15 PM, an employee's finger was caught in the pinch point of a press brake, amputating his left ring fingertip.",0
"An employee was pressure washing the floor in the cleaning room area when the pressure washer wand moved toward his left foot, resulting in a small cut. The cut became infected and required hospitalization.",1
A maintenance employee was hospitalized due to exposure to outdoor heat.,1
"While delivering parcels to an office building, and employee fell down stairs and suffered a broken neck and sprained legs and arms.",1
An employee was operating a forklift when the forklift tipped over. The employee's leg was crushed under the rollover protection cage. The employee was hospitalized with a broken leg and other bodily injuries.,1
An employee was hospitalized due to heat stress.,1
An employee hurt his finger while using a screwdriver to perform electrical work.,1
"While loading heavy brake parts into a machine, an employee suffered a herniated back disc and was hospitalized.",1
"An employee slipped on the gravel in the parking lot and fell, suffering an elbow injury.",1
An employee was stacking plastic tubs and had a seizure. The employee fell to the floor striking his head and elbow causing contusions to both. The employee was hospitalized.,1
"A temporary employee was operating a reach truck when the truck started heading straight toward a pedestrian guardrail. When the employee attempted to dismount the truck, the employee's foot became pinned between the reach truck and the guardrail, resulting in a left foot amputation.",0
An employee was greasing a gear inside a machine when his left little finger was caught and amputated in the machine.,1
"An employee was offloading boxes from a wooden pallet that was sitting on the floor while working at the receiving section of the warehouse. She tripped on the edge of the pallet and fell, fracturing her left tibia.",1
"An employee was folding back a lift gate attached to a moving truck when his hand was caught in the gate, crushing all four fingers and requiring surgery.",1
"An employee was feeding edge trim onto a conveyor when his hand became caught between the roller and the conveyor belt. He was pulled into the conveyor up to his elbow, suffering a right arm laceration and abrasion.",1
"An employee was pulling a wheeled metal cart when a wheel became stuck. As she was trying to dislodge it, the cart fell on top of her. She was hospitalized.",1
"An employee slipped and fell after he stepped on acrylic material, suffering a fractured left arm, torn ligament in his left knee, and a broken left ankle.",1
"An employee was walking down a flight of stairs when he fell, rupturing the patellar tendons in both knees.",1
"An employee was in the process of removing an overhead roll-up door. While the employee was removing bolts from the door, the ""D-Ring"" swung out of place and struck the employee's ladder, causing the employee to fall and break an arm.",1
"An employee was in the process of attaching handles to a 30-quart cooler when her hand was caught on a piston, amputating her right middle fingertip.",0
"An employee stepped into a pit containing hot water while performing cleanup duties, suffering burns to the lower legs and arms.",1
"An employee was walking through a metal door when it closed on the employee's right pinky fingertip, amputating it.",0
"An employee was tipping over (breaking open) a mold that contained liquid molten iron. The molten iron came in contact with the cuff of his leather glove and traveled down the inside of his glove to the palm and fingers, burning his hand.",1
An employee was holding a piece of metal in his hand and sanding the metal on a belt sander. The belt sander grabbed the piece of metal and pulled the employee's right hand in. His right thumb contacted the belt sander and was amputated.,1
A customer was trying out a golf club and an employee was hit in the head by the golf ball.,1
"An employee was attempting to manually unjam the pleating machine. The stripper bar broke free of the pusher bar and cycled down to the table before returning to and resting in the up position. The employee's left hand was caught between the stripper bar and table during the down cycling of the bar. His left hand was sliced between the index and middle fingers to the wrist, and half of his hand was amputated.",1
"An employee operating a table saw amputated his right index, thumb, and pinky fingertips while cutting material.",1
"An employee fell down a stairwell, suffering facial fractures, broken and loosened teeth, shoulder pain, back pain, and buttock pain. She was hospitalized.",1
"An employee was gathering roofing debris in a wheel barrow when he tripped and fell on roofing material, breaking his right ankle and requiring hospitalization.",1
An employee's left index finger was amputated while attempting to release product on a mixer.,1
"An employee was working on the lower leg of a standing tower, installing steel members and bolts, when he fell approximately 30 feet from the tower to the concrete ground. He fractured his sternum, pelvis, leg, and arm.",1
"An employee was operating a door press when the press closed on the employee's left little finger, crushing and amputating it.",1
"A decoiler slipped off of forklift straps and crushed an employee's right-hand pinky and middle fingers, amputating them.",0
"An employee was performing tank gauging on a produced water tank. After opening the tank's thief hatch, the employee was exposed to hydrogen sulfide, suffering headaches and nausea.",1
"An employee was mounting plates on a printing press when his left ring fingertip was caught between the plates, partially amputating the soft tissue.",1
An employee was holding meat in front of a vertical saw blade to cut it when the employee's foot slipped on the floor. The employee's right index finger then impacted the saw blade and was partially amputated with bone loss.,0
An employee was raising the safety rail on the conveyor and holding onto the vertical support rail. His left middle finger was caught in the hinge amputating the fingertip.,0
"An employee was attempting to secure a nasogastric tube to the bridge of a patient's nose when the patient bit the employee, amputating the employee's right pinky fingertip.",0
"An employee was taking orders at the drive-thru window when she tripped and fell to the tile floor, fracturing her right ankle.",1
"An employee struck a double stack pallet of product while operating a pallet jack, breaking the left femur.",1
An employee was attempting to fix air conditioning vents on a trolley when the fan blades inside the air conditioning unit amputated his fingertip.,0
"While cleaning a machine, an employee's finger became caught in the sprocket and chain of the moving equipment. The employee's middle and ring fingers were partially amputated.",1
"On or about August 6, 2016, an employee was using a vehicle-mounted winch when the holding mechanism malfunctioned and the wire cable kept unwinding. The employee could not pull their right hand back in time and it was pulled into the first ""sheave"" that was about 6 feet away from the winch, amputating three fingers.",0
An employee fell through a skylight while installing a new roof. He injured his wrist and spleen and broke his eye socket.,1
"An employee was holding the top of a small manway cover and abrasive blasting the handle. The force of the blast media hitting the cover caused the cover to twist in the employee's hand, which caused his left hand to move into the blasting media stream. The blast media penetrated the back of his glove and abraded the back of his hand.",1
An employee pinched and crushed her left hand while cleaning a disassembled airlock machine with a water hose.,1
An employee rolled and fractured her ankle while picking up bread trays.,1
"An employee was carrying a ladder on his hip when he tripped and fell, landing on top of the ladder. He later experienced irregular breathing and was hospitalized with nine fractured ribs, a collapsed lung, a broken collar bone, and shoulder and hip sprains.",1
"An employee was helping a coworker move a guide cart. The employee was pulling the cart while the coworker was pushing it. After the cart came over a hump, it had to be pulled and pushed through four metal beams. The cart struck one of the beams, causing it to come to an abrupt stop. The guide shifted, pinching and fracturing the employee's right ring fingertip.",1
"An employee was rolling product on a dolly when his foot caught on something. He twisted his left leg, fracturing both lower left leg bones.",1
An employee received burns from hot cream.,1
"After using the meat cutting band saw, an employee turned off the machine and was pushing down the blade guard. The blade, which was still slowing down, amputated the employee's right middle fingertip.",0
"An employee was stepping down out of a commercial truck cab when he missed the bottom step with his foot. He lost his grip on the handholds and fell backward to the ground, hitting his head on the gravel surface and suffering a head abrasion.",1
"On 8/7/16, at about 3:30 p.m., an employee injured his back  while re-arranging office furniture, requiring hospitalization.",1
"An employee was loading an LD8 (large cage for baggage) onto a cargo bed dolly. The LD8 shifted and his hand was pinned between the LD8 and the flat bed dolly, possibly amputating his left middle finger.",0
An employee was working on the cam lock for a heat treating table when he suffered an electrical shock.,1
An employee opened one of the two doors on the rail cars. The door swung around and made contact with the plate and the employee's finger resulting in a distal amputation.,0
"An employee was using a hand chisel and hammer to remove the blade from the lower pocket of the shear head. While he was driving the chisel with the hammer, a small piece of metal came off and punctured his arm 3 inches above the elbow.",1
"An employee slipped and fell 6 to 8 feet while cleaning a conveyor, fracturing the left clavicle and humerus.",1
An employee was cleaning the inside front glass of a chameleon cage when the glass fell and cut muscle and tendons in his left leg. He required hospitalization and surgery.,1
"An employee was unloading baggage tubs from a cart when he lost his balance and fell over, striking his leg on the baggage conveyor and fracturing his right femur.",1
An employee was climbing a ladder when he fell off and broke his right arm.,1
"On August 07, 2016, at approximately 10:00 PM, an employee was hospitalized due to dehydration and heat exhaustion.",1
"While delivering mail, an employee was bitten by a dog on the upper and lower left arm. The employee was hospitalized and required stitches.",1
An employee was working in an aeration basin and attempted to retrieve a grappling hook when he slipped and fell breaking his lower left leg.,1
"While operating a wire press, an employee's left thumb was amputated by the press clamp.",1
An employee was bitten on the hand by a rattlesnake while turning a valve to change the flow direction. The snake was coiled underneath the tank hatch. The employee was hospitalized.,1
"While delivering mail on her route, an employee began feeling faint and experienced pains in her chest. She was hospitalized due to possible heat stress.",1
"An employee was working on a faulty water cannon and was standing in front of it. The cannon motor did not stop running and hot water (being hot from the sun) escaped, burning the employee. The employee was hospitalized.",1
An employee fell 8 feet off a ladder onto a generator that was located approximately 5 feet away from the ladder.,1
An employee felt dizzy and lightheaded while delivering mail. The employee was hospitalized due to heat stress and kidney failure.,1
"On 8/8/16, an employee was cutting metal on a shear. The employee's gloved hands became caught in the metal hold-down pads that push the metal into the shear. The employee suffered a right-hand middle fingertip amputation, as well as left-hand middle and index fingertip amputations.",0
An employee was testing electrical voltage when an electrical arc flash occurred. The employee suffered electrical burns to the arms and was hospitalized.,1
An employee was unloading packages from a trailer. A package fell and struck the employee pushing her into a trailer flap. The employee was hospitalized with two rib fractures and a laceration to the left kidney.,1
"An employee was walking out of the cold storage area when a forklift backed up over his left foot, bruising it.",1
"An employee opened a door for another person. The door then shut on his right-hand middle finger, partially amputating it.",0
An employee was tubing when she hit her head and suffered a concussion.,1
"An employee was crimping tube on a block machine when his left-hand ring finger was caught, crushed, and amputated in the clamps.",0
An employee fell 3' 11'' and dislocated the right shoulder.,1
"An employee suffered a fractured ankle during a scaffolding collapse and simultaneous fall, requiring hospitalization.",1
"A temporary employee became involved in a physical altercation with another temporary employee, suffering a fractured right fibula/dislocated right ankle.",1
"On or about August 8, 2016, an employee was exposed to excessive heat while tearing off a flat roof and was hospitalized for heat exhaustion.",1
"An employee was retrieving material from a drying rack and descending a 4-foot ladder when he fell and suffered a broken hip, requiring hospitalization.",1
"An employee was in the process of maintaining the swimming pool. A PVC pipe burst and the employee received chemical burns to the left side of the face, chest and arm. The employee was hospitalized.",1
An employee was trimming shrubs with gas-powered shears when the shears amputated his right-hand index fingertip.,0
"An employee was operating a large farm tractor outdoors when he experienced blurred vision, slurred speech, a queasy stomach, and unsteadiness. He was hospitalized with heat-related illness.",1
"An employee was walking around an order picker when he tripped over the wheel, fell to the ground, and broke his femur and hip. He was hospitalized.",1
"An employee was standing on the bolster of a chassis, hooking up a chain to the chassis to lift up a pedestal. The yard jockey driver backed up to the chassis, left the yard jockey in neutral, and got out without setting the brake. The yard jockey then rolled back and pinned the injured employee's left leg between the yard jockey and the chassis, causing a severe contusion and swelling that required hospitalization.",1
An employee was in the hatch of a maritime vessel attempting to hook up to a bundle of pipe to lift it out of the hatch. The employee began to experience severe body cramps and was hospitalized with severe dehydration.,1
"After working in the heat, an employee passed out due to heat stress and was hospitalized.",1
"An employee become dehydrated, nauseated, ill, and experienced muscle spasms due to the heat. He was hospitalized.",1
An employee was walking from one area to another when she slipped and fell onto her left hip. She was hospitalized with a wrist injury and a fractured left hip.,1
"At approximately 8:00 AM, on 8/8/2016, an employee was attempting to adjust the forks on a forklift when his fingertip was crushed between the fork and the frame of the forklift. He required surgery.",1
An employee was trying to readjust a trailer hitch when the employee's finger was caught and partially amputated between the trailer hitch and the ball of the truck.,0
An employee was operating a reamer drill when the main frame of the reamer drill struck the employee in the abdomen/stomach area. The employee was hospitalized with internal bleeding.,1
An employee suffered a finger amputation while working on a CNC machine.,1
An employee partially amputated the left middle fingertip while loading a machine with bar stock.,1
"An employee fell to the floor while climbing a ladder to inspect a spray booth, breaking the L1 vertebra.",1
An employee was using a skill saw to cut plywood for concrete forms and cut his left index finger to the middle of the nailbed (no bone loss).,0
"An employee was using a drift pin to align form holes for assembly. When the employee struck the pin, a shard flew up into his interior nostril, lacerating it.",1
"An employee seated at an inspection station attempted to move a power strip with their right foot. As the employee extended the right leg, the chair tipped and ejected the employee to the concrete floor. The employee suffered a broken right ankle and was hospitalized.",1
"Workers were offloading jersey barriers from a trailer when they lost control of one of the jersey barriers, causing it to strike an employee in the back. The employee rolled off the trailer and laid down on the ground. The employee was hospitalized with L2 and L3 vertebrae fractures.",1
"An employee was stripping/unloading a trailer. There was a deck bar in the trailer towards the top of the vertical tracks. The employee was trying to remove the bar, but it was not coming loose. He then walked under the deck bar towards the front of the trailer and it released striking him on the top of his head, causing a laceration to the top left side of his head.",1
"An employee offloaded tertiary butyl catechol (corrosive) from a cargo tank to a facility tank. Upon completion of the transfer, the employee began disconnecting hoses. He had difficulty with one of the connections and when the hose disconnected, hot product contacted the employee's left arm and leg, causing a third degree burn.",1
"An employee was removing a strap from a column that was being adjusted using a forklift. The strap released from the load and struck the employee in the face, causing head trauma.",1
An employee suffered an asthma attack while using a powered floor sweeper to clean the floor.,1
An employee's left-hand middle fingertip was crushed and amputated while the employee was attempting to repair forming equipment.,0
An employee was opening the door of his truck when a roll of material weighing more than 400 pounds knocked him down. He fractured his lower back.,1
An employee was changing the shock absorber on a military truck when the replacement shock absorber shifted during installation and amputated 1/2 an inch of the employee's left index finger.,0
"An employee was working behind a piece of equipment when he tripped and fell into a belt and pulley, amputating his left index and middle fingers up to the first joint.",0
An employee's foot/ankle was crushed after getting caught between a wall and a pallet jack.,0
"On or about August 8, 2016, an employee attempted to wipe away dust near the pinch point on a press machine. The press came down and amputated the employee's right thumb tip.",0
"An employee was standing on a column guiding a forklift operator when the forklift struck the column, causing the employee to fall. The employee suffered bruises and possible internal damage.",1
"While painting an awning, an employee fell about 15 to 16 feet and fractured his femur.",1
An employee was carrying boxes to the freezer when he tripped and fell over trash bags on the floor. The employee suffered lower back and left leg injuries.,1
"An employee entered a trench that was properly shored with a steel trench box and access ladder. The employee was using a cut off saw to cut through an abandoned water main. The section of main was isolated/shut off and restrained from the live portion of the main the prior day. The employee successfully cut through the main and turned around to place the cut off saw on 
the ground. As he did, the water main valve from the live portion of the 
main failed and separated from the pipe striking his knee. Water from the main began to fill the trench. As the employee began to exit the trench box his hard hat fell off. The employee fell and his head hit the spreader bar. The employee suffered a left knee fracture and a head contusion.",1
"An employee fell 4 feet off a ladder, fracturing the lower left leg.",1
An employee was shoveling asphalt when he began to feel unwell. He was hospitalized for heat exhaustion/dehydration.,1
"On August 9, 2016, an employee fell from a straight truck's lift gate while making a delivery, suffering a fractured hip/right upper leg and requiring hospitalization.",1
An employee was moving heavy products upstairs and felt pain in the back. The employee was hospitalized for a bulged disc.,1
"An employee was holding onto a scaffold when a metal flashing on top of the scaffold fell and struck the employee's left forearm, lacerating it.",1
"An employee stepped on a piece of bridge decking and fell through to the ground, suffering a cut on the head and one broken rib.",1
"An employee was moving pallets with an electric pallet jack. While backing up the pallet jack, his leg got caught in the wheel well of a forklift. The forklift operator began to move the forklift forward, causing the employee's leg to be pulled farther into the wheel well. He suffered broken bones in his right foot and a fractured right elbow, requiring hospitalization.",1
An employee had some cramping in his right shoulder and passed out for approximately 2 to 3 minutes possibly due to heat stress.,1
An employee was laying down a power swivel when the swivel fell and fractured the employee's tibia and fibula.,1
An employee was cutting wood on a table saw when a piece of wood shot back and struck him in the eye.,1
"On Tuesday, August 9, 2016, at approximately 3:00 PM, an employee was walking near the receiving entrance to the facility. He turned around and tripped over bags of grout that were on the floor and fell. He was hospitalized for a fractured hip.",1
"On or about 8/09/2016, an employee was guiding an operator who was lowering a concrete mat. The spreader bar came loose and hit the employee in the lower back, fracturing his right femur.",1
"An employee was installing a security camera at a commercial building while on top of a 6-foot ladder when he lost his balance and fell to the ground, breaking bones.",1
"An employee was climbing an extension ladder to place a clamp when he fell 8 feet to the ground, bruising his forehead and lacerating his nose, lip, and back.",1
"An employee working from a ladder suffered an electrical shock. The employee fell from the ladder and suffered fractures to the face and back/neck, requiring hospitalization.",1
An employee's right index fingertip was amputated.,0
"An employee was installing a mirror when a piece of it broke off and impaled the employee in the chest, causing a laceration to the chest/abdomen.",1
An employee experienced heat stress and was hospitalized.,1
"An employee was responding to a trouble call work order at the home of a customer. He was standing on and working from an extension ladder at an estimated working surface height of 15 ft. in order to remove and replace the drop (aerial cable) that was serving the customer's home. He cut the drop at the point where it was attached to the mid-span. The release of tension on the drop caused the mid-span to recoil, thereby throwing the employee from the ladder to the ground onto his right hip. He sustained a fracture to the lower portion of his back (spine) and was hospitalized.",1
"An employee was offloading a termite mini excavator from a trailer when the excavator missed the ramp and began to tip over. The employee dismounted the excavator and broke the left femur, requiring hospitalization and surgery.",1
"While spreading pine straw, an employee was bitten by a spider and had an allergic reaction (swelling and inflammation), requiring hospitalization.",1
An employee was bitten by a copperhead snake while picking up loose material.,1
"An employee on a scaffold had been welding on a pipe structure for 8 to 8.5 hours. When he came down off of the scaffold, he exhibited signs and symptoms of dehydration, hyperglycemia, and heat exhaustion, requiring hospitalization.",1
An employee and a coworker were working on the glass front entryway door. The employee was adjusting the door-closing mechanism with the door closed. The coworker opened the door while the employee had his finger in the closing mechanism. It closed like a scissor and amputated the employee's right index fingertip.,0
An employee was finishing up concrete padding operations in 90- to 91-degree temperatures with a 105 to 106 heat index when he felt dizzy and experienced cramping. He was hospitalized overnight.,1
"An employee was in a resident's room to draw blood for a blood sugar test. When she turned to leave the room, she tripped over an electrical cord for the bed's alarm mat. She fell on her right side and fractured her right femur.",1
An employee experienced heat-related illness and dehydration while delivering his route.,1
"An employee descending a step-stool missed the last step, losing balance and falling to the floor. The employee suffered a possible broken hip.",1
"On or about August 9, 2016, an employee driving an electric pallet jack was struck by a coworker driving an electric sit-down forklift, suffering a broken ankle.",1
An employee injured his hand when it was caught in a ribbon blender.,1
"An employee was trying to identify where a noise was coming from on a conveyor belt when his watch and then left hand were caught in the conveyor, de-gloving some skin. He was hospitalized.",1
"An employee was assembling scaffolding, took a step back, and fell down the stairwell dislocating the right wrist.",1
An employee was manually turning a drive belt when their thumb was caught between the roller and the belt resulting in a partial amputation of the right thumb.,0
"An employee was staging a part on a coordinate measuring machine. The employee put the part onto the fixture. A hole in the casting into which the fixture pin is placed was not big enough. The employee placed the part on its side to deburr the hole out. The employee was repositioning the part onto the fixture when it slipped and crushed his finger between the part and the fixture, amputating his fingertip. The part weighed about 56 pounds.",0
"An employee was adjusting air conditioner vents when the malfunctioning unit caught on fire, causing second degree burns.",1
"After repairing sprinklers outdoors at a customer's site in the sun, an employee experienced kidney problems likely due to severe dehydration. The employee was hospitalized.",1
"An employee was attempting to clear a jam on the bottling machine when the bottle filler tube punctured his left hand between the first and second digits, requiring sutures and possible hand surgery.",1
"An employee was working on a 22.5 MVA transformer when an electrical explosion occurred. The employee received first, second, and third degree burns on the left arm, neck, shoulder, and back.",1
"An employee was changing a viber plate on a mini-excavator and aligning the shim when the driver in the cab accidentally bumped the lever, causing the arm of the machine to pinch the employee's thumb. The employee's thumb tip was amputated and thumb bone was smashed, requiring hospitalization.",1
An employee was pulling a mold cart. The cart tipped and the employee fell onto the concrete floor injuring his back.,1
"An employee was pouring a dry powder chemical compound (DMPA) into an empty 25-lb plastic bag for shipment when he began to experience a running nose, shortness of breath, and a sore throat. He was hospitalized and treated for a possible allergic reaction.",1
"An employee was servicing an aircraft engine when he fell off a ladder and injured his wrists, requiring hospitalization.",1
"An employee was loading an ATV onto a trailer when one of the ATV's wheels came off the trailer and the ATV tipped over, fracturing the employee's vertebra.",1
An employee was on a ladder and fell 4 to 5 feet fracturing a disc in the lower back.,1
"An employee was standing/stepping on the tracks of a bulldozer when the tracks moved, crushing the employee's heel bone and tearing the surrounding tissue.",1
An employee was getting ready to step from the roof onto a ladder when it started to rain. He fell to the ground and suffered back and sprain injuries.,1
"An employee was cutting a flat piece of cork stock (1/8"" thick from a 12""X12"" section) to be used as trimming on furniture. He was having difficulty cutting the cork material because it would not slide on the table saw surface due to the cork material adhering to the table. He proceeded to apply more force, and as he attempted to push the stock into the blade, the material inadvertently folded, causing his left hand to move into the rotating blade. His left-hand pinky finger was amputated, and his ring finger was lacerated.",1
"While repositioning a 148-pound part on a pallet, an employee suffered a back strain and was hospitalized.",1
An employee was helping a customer to move feed sacks on the back of the customer's flat bed truck. The employee stumbled and fell approximately four feet to the ground fracturing the left hip.,1
"A temporary employee was washing/detailing a car when he slipped on some water and fell, fracturing his left femur.",1
"An employee was unloading 10- to 15-pound packages from a trailer and stacking them. The employee finished unloading the packages and stepped onto the roller system (8 to 9 inches long in the middle of the trailer deck). The employee then lost their footing and hit the floor, striking the left hip and breaking the left femur.",1
"While operating a pallet truck, an employee's foot became wedged between the pallet and product, fracturing the employee's ankle.",1
An employee was climbing a ladder to cut tree limbs that were blocking the customer's view of the satellite dish. The employee fell off the ladder and struck a galvanized pole. The employee was hospitalized with kidney and abdominal trauma.,1
An employee had attached braces to a tank using a ladder. He started to climb down and fell approximately 7 to 8 feet to the ground striking his head. The employee was hospitalized for a fractured skull and ribs.,1
An employee walked across the parking lot and felt ill. He was hospitalized with heat-related illness.,1
"An employee in a rigger box that was on a forklift was connecting cables to a flat rack storage container that was high up in the air. The employee fell 15 feet out of the rigger box to the ground, fracturing bones and requiring hospitalization.",1
"While an employee was moving a fan and floor mat, the fan was knocked over and the screen and blade came off and struck her left hand, cutting her fingers and breaking her ring finger.",1
An employee fell approximately 6 feet from the roof during painting activities.,1
"An employee was feeding rebar into the rebar bending machine when his hand was pulled into the point of operation, crushing his right pinky finger. The finger had to be medically amputated.",1
The injured worker was installing a pet drinking fountain when he became dizzy and disoriented which resulted in hospitalization for heat stroke.,1
An employee was removing a clump of fertilizer from a screw conveyor when two fingers on his left hand became caught and partially amputated in the conveyor.,0
"An employee was unjamming a log stuck in the slab deck. His hand was caught under the log when his coworker restarted the machine. This caused the log to smash his right ring and pinky fingers, leading to a medical amputation of his fingertips.",1
"While helping to install a metal hand railing, an employee suffered cramping due to working in the heat. The employee was hospitalized overnight for heat exhaustion.",1
An employee was preparing for a system demonstration of the NitroJet when the employee's left hand came close to the system's nozzle and was cut.,1
An employee suffered injuries to the left leg and shoulder after falling to the ground while picking up a piece of wood.,1
"An employee's left-hand pinky finger was crushed between press dies, requiring a partial amputation.",0
An employee was attempting to pull a long piece of material through a rotary cutter when two of his fingers were caught in the machine. His right index and ring fingertips were amputated.,0
"An employee was using a choker chain and hoist to lift material and relocate it. The hook slipped and pinched his left ring fingertip, amputating the fingertip.",0
"An employee was taking laser measurements at a client facility in the freezer area. There was a roof leak and patches of black ice on the floor. The employee slipped on the ice and fell to the floor, sustaining a hairline fracture to his right hip and injuring his right arm. He was hospitalized.",1
"An employee's hand was caught in rollers while flaking corn, amputating fingers.",1
An employee was struck in the legs by a motorized wheelchair and subsequently hospitalized.,1
"When the employee placed a piece of metal into the shear, the weight difference between the heavy end and lighter end caused the piece of metal to be raised above the shear table. The shear cycle then activated via the foot pedal, and the hold-downs and guard lowered and forced the piece of metal down toward the shear table. The employee's right index fingertip was pinched and amputated between the metal and the shear table.",0
"An employee was retrieving work equipment from the roof when he fell through a hole cut by another employee. He suffered broken ribs, cracked vertebrae, and a dislocated shoulder, requiring hospitalization.",1
"An employee was cleaning a laminate glue machine when his right thumb became stuck in the machine rollers, amputating his thumb tip.",0
An employee was carrying breadsticks out of the walk-in freezer when a piece of metal on the freezer door sliced his foot open.,1
"An employee was cleaning a roller with a rag when the rag became caught in the roller. The employee's right index finger was pulled into the roller, causing an abrasion and requiring hospitalization.",1
"A belt on an auger became jammed with wheat. An employee turned off the power to the auger and attempted to loosen the belt. The belt temporarily released and pulled the employee's finger between the belt and a pulley, amputating the employee's left index fingertip.",0
"An employee was removing a tire from a split rim wheel on a heavy truck when the lock ring was blown off of the assembly. The force amputated the employee's 3rd, 4th, and 5th digits on the left hand.",0
"An employee was putting in a steel post approximately 6 feet tall and 6 inches in diameter when he was struck by the bucket of a mini excavator. His hand was caught between the top of the post and the bucket of the excavator, amputating his left-hand pinky and ring fingertips.",1
An employee had just finished using a shear press when he began to feel ill. He was hospitalized for heat exhaustion.,1
"A maintenance employee was changing the ballast above the tile in the ceiling space. He stripped a wire and cut it. While still holding the wire, his body came into contact with the metal grate that holds the ceiling tiles, and he suffered an electrical shock.",1
"An employee was walking in the yard when a loader truck struck him, breaking his right leg.",1
"An employee was using a side boom along a pipeline when the wooden mat broke apart and the lift began to rock. The employee exited the side boom and landed on some rocks, injuring his left elbow, ribs, abdominal area, lungs, and the right side of his face. He was hospitalized.",1
"On August 10, 2016, at approximately 11:45 PM, an employee was operating an ATV when he ran into a dry canal. He hurt his wrist, ankle, ribs, and hips.",1
An temporary employee was moving a bag of chemicals when the bag opened.  The employee was covered in the chemical and later suffered burns to a large portion of his body.,1
"On 8/10/16, at 12:15 p.m., an employee was riding a lawn mower on an incline when it rolled and fell 10 feet from a wall to the grass below. He fractured his left tibia and lacerated his head, requiring hospitalization.",1
"An employee stepped into an open pit and fell 4.5 feet to the concrete floor, breaking the right femur and requiring surgery.",1
An employee had trouble breathing and was hospitalized for possible heat stress.,1
"An employee was operating a table saw to cut a piece of wood when the wood became bound in the saw blade and kicked back, causing the employee's left thumb to contact the blade. The thumb tip was amputated with some bone loss.",0
"While driving a work bicycle, an employee was struck by a moving vehicle, suffering bruises and scrapes on the legs, shoulders, and arms.",1
An employee was performing furnace maintenance when he began feeling overheated. He was hospitalized for a heat-related illness.,1
"An employee was trimming an ornamental pear tree with a pole saw when the pole saw came in contact with an electrical line. The employee suffered an electrical shock and received a burn on his right hand and on each foot, requiring hospitalization.",1
An employee was hospitalized for a heat-related injury.,1
"An employee was descending a staircase when his knee buckled, causing him to fall down the stairs. He fractured his left femur.",1
"While cutting metal studs with a chop saw in hot weather, an employee did not feel well and was hospitalized due to dehydration.",1
"An employee's right hand was bitten by a dog while delivering mail to a resident's door, requiring hospitalization.",1
"On 8/11/2016, at approximately 3:05 PM, an employee was cutting a stair stringer with a circular saw when the board moved. As he attempted to grab the board, the saw kicked back and amputated his left middle fingertip.",0
"An employee was installing insulation on a roof cavity between two purlins when he fell 30 feet through an opening to the ground, crushing his head.",1
An employee was hospitalized for a heat related illness.,1
An employee was cleaning a roll of steel when the roll cycled and amputated his right index finger.,0
"An employee was connecting pipes on the drilling rig from the derrick position. The employee fell from the derrick to the rig floor, suffering torso injuries.",1
"An employee was using a 2-inch screw pipe to remove a coupler. He used a pipe threading machine and pipe wrench to force the coupler to screw off. His right ring finger was pinched between the pipe wrench and the pipe threading machine, amputating his distal fingertip.",0
"After delivering packages for 7.5 hours, an employee suffered a heat-stress-related event and was hospitalized for dehydration.",1
"An employee was walking down a marked walkway when he slipped on a tiny piece of plastic, causing him to fall and break his right ankle.",1
An employee  was installing cable system at an apartment complex and was overcome by heat.,1
"On or about August 11, 2016, an employee was hit by a forklift, suffering a severe laceration to the left big toe. The employee was hospitalized and required stitches.",1
An employee pulled up to a tractor trailer with a fork truck. He got off the fork truck and went to open the tractor trailer door. The fork truck rolled into him and pinned him between the pallet and the tractor trailer causing internal injuries.,1
"An employee was disassembling equipment when his hand contacted a running belt and was drawn into a pinch point, amputating his fingertip.",0
"An employee was moving a vat on a vat lift. When he attempted to correct the alignment of the vat, his finger was pinched between the vat and the vat lift, amputating his fingertip.",0
An employee was working on the roof of a commercial building when the deck gave way and he fell approximately 15 feet to the ground below. He was hospitalized.,1
"An employee slipped and fell into a 145-degree hot water pit, suffering second and third degree burns to the lower body.",1
"An employee was waiting on the side of the road for assistance with his disabled vehicle when an oncoming vehicle lost control and struck him, fracturing his leg, pelvis, and/or hip.",1
"An employee was working from a ladder when it slid from under the employee. The employee fell, fracturing the left ankle and a bone under the right knee.",1
"An employee was operating a zero-turn lawn mower when he approached a steel cable approximately 3 feet off the ground. He became caught in the cable, and both of his legs were lacerated and crushed between the cable and the mower's mowing deck.",1
"An employee was filling a lead mold when the mold dropped on his right hand, fracturing his right forefinger and bruising his right thumb.",1
An employee was attempting to rig a solid web rafter beam when the beam leaned toward the employee and fractured the employee's right foot.,1
"After loading yard waste onto a waste disposal collection truck for 2  hours, an employee became dizzy and lightheaded. The employee was hospitalized with severe dehydration and acute kidney failure due to the heat.",1
"An employee was cleaning the debris off of a pitched roof when he fell from the eave onto the lower flat roof (fell about 5 feet), breaking his pelvis and requiring hospitalization.",1
"On August 11, 2016, at approximately 8:30 AM, a forklift ran over an employee's right foot, breaking it. The employee was hospitalized.",1
An employee was on a baker scaffold. A plank shifted and the employee fell 4.5 feet. The employee suffered a fracture to the sternum.,1
"While working from the roof of a house, an employee fell approximately 20 feet from the roof eave to the ground. The employee suffered a fractured right heel and was hospitalized.",1
"An employee fell approximately 13 feet from the roof while attempting to install an anchor, suffering a fractured pelvis.",1
An employee was carrying a pipe to a dumpster when the pipe dropped and landed on his leg. He was hospitalized with a broken leg.,1
"An employee passed out while filling napkins into a dispenser, fracturing her left leg.",1
"On or about August 11, 2016, an employee was cutting steel bar stock on a band saw when the employee's left index finger was caught between the band saw stop and the bar stock as a vertical vice closed to secure the bar stock. The distal phalange on the finger had to be surgically amputated.",0
While delivering mail an employee felt ill possibly due to heat and was hospitalized.,1
"While repairing a grill exhaust fan, an employee suffered an amputation of the right index finger at the first joint and a fractured right middle finger at the first joint.",0
An employee became weak and dizzy while making a delivery. He was hospitalized due to dehydration.,1
"On or about August 11, 2016, an employee was adding ink to the decorator can printing machine when the ink fell. When the employee attempted to grab it, the employee's hand became caught between the plate cylinder and the blanket segment, amputating the left ring finger.",0
"As an employee was walking on site, he felt lightheaded and headed over to the gang box, where he blacked out. He was hospitalized for possible heat-related illness.",1
"While changing/replacing lighting from an extension ladder, an employee received an electrical shock and fell 20 feet, breaking a tibia.",1
"An employee was operating a bread molder/slicer machine. His right index finger was caught in the machine, amputating his right fingertip above the fingernail.",0
"An employee was attempting to transfer product from a partially filled drum to an empty drum. He placed a valve in the bung of the partially filled drum to complete the task. When he opened the valve to initiate the pour, the valve came off, and hexamethylenediamine splashed on him, causing first and second degree chemical burns to his face/upper body.",1
An employee amputated a fingertip (no bone) while slicing onions with a knife.,0
An employee fell while walking down the stairs and was hospitalized with an ankle fracture.,1
"An employee suffered from heat exhaustion and dehydration while stacking 50 lb. bags of carbon black, requiring hospitalization.",1
"An employee was conducting maintenance on the nacelle of the wind turbine when he slipped and fell onto a stair, landing on his right-side ribcage and suffering a collapsed lung.",1
"An employee was working in the rolling mill when he began to feel nauseous, light-headed and started cramping. The employee was hospitalized for heat exhaustion.",1
An employee was performing maintenance work on the cotton gin when a piece of the equipment shifted and amputated the left index fingertip.,0
An employee fell off the shipping dock and broke several ribs.,1
"An employee was signaling a backhoe while doing excavation. His hand was holding onto a chain that was attached to a trench box and the backhoe. He signaled the backhoe, which moved the trench box. When the weight shifted, the employee's hand was pinched by the chain, avulsing and fracturing his left ring finger.",1
"An employee was moving a 55-gallon drum off a tommy-lift to a pickup truck. The employee tilted the drum back to roll it off the lift and released the drum. The drum pinched the employee's left pinky finger between the other drum, amputating the fingertip.",0
An employee was holding a piece of plywood in his right hand by the steel structure of a conveyor. A forklift was returning a dumpster to that area and the forklift struck the plywood pressing the employee's finger between the plywood and the steel structure of a conveyor. The tip of the employee's right ring finger was amputated.,0
An employee working in the drumming area started walking slowly and breathing hard. The employee was hospitalized for dehydration.,1
An employee was using a water hose to spray a conveyor. He observed a piece of meat in the conveyor and was attempting to remove it when his left arm was caught in the sprocket. He was hospitalized with a fractured left arm.,1
An employee suffered chest pain with tachycardia and was hospitalized after exposure to dry vinyl sealer and stain used on doors.,1
"On August 12, 2016, at approximately 3:00 p.m., an employee fell to the cement floor while trying to stabilize a stack of air conditioners. Some of the A/C units then fell on top of him, causing brain bleeding and a black eye, fracturing a rib, and puncturing his lung.",1
"An employee was working on the extrusion line. During the process of removing the shaft from the roll, the employee used his right index finger to release the air from the shaft. He pushed the button to move the shaft carriage system upward with the left hand. The shaft carriage system crushed his right finger between the shaft carriage system and the shaft, amputating his index fingertip.",0
"An employee was cleaning and sharpening the food slicer's blade when her left hand contacted the blade, amputating her pointer and middle fingertips.",0
"On August 12, 2016, an employee attaching toters to a truck began to feel lightheaded and dizzy due to a heat-related illness in the late afternoon.",1
"An employee was walking in an aisle while a forklift operator was approaching with a cart on the front of a forklift. He saw the employee at the last moment and pressed the brakes all the way to the floor. The load shifted, rolled forward, and hit the employee, injuring her right hip and left hand. She was hospitalized.",1
An employee's foot was injured when it was run over by a forklift.,1
"An employee was helping other workers dispose of a small engine that was attached to a pulley and a shaft. The workers were turning the small engine to load it on a pallet jack, and the employee reached between them to help load the engine onto the jack. The pulley then slid down the shaft and smashed his pinky finger, amputating the fingertip.",0
"An employee was working on a sheet metal cutting machine when two fingers on his right hand were caught in a chain and sprocket, amputating his pointer and middle fingertips.",0
"An employee was working on the picking station when a piece of metal flew through a metal cage and hit him, breaking his arm.",1
"An employee was driving a forklift into the freezer to retrieve product. As the employee traveled over an uneven portion of the floor, it caused the forklift to swerve. The employee's left elbow was caught between the forklift and a post, breaking bones and dislocating the left elbow.",1
An employee was pressure flushing a clogged drain pipe that contained a caustic chemical with a pressure washer. The caustic substance in the drain pipe was pushed back out by the water pressure and splashed into the employee's face. His safety glasses were knocked off by the pressure and the caustic chemical got into his eyes. He was hospitalized.,1
"An employee was installing electrical conduit when he fell 3 feet, 7 inches through an expansion joint opening in the floor, landing on top of an I-beam and injuring his vertebrae.",1
An employee was cleaning the top of a manhole with a brush when a truck drove over him. He suffered broken bones and was hospitalized.,1
"An employee was using a wood processor to process logs. The logs, which were being held down by a clamp, tipped, so the employee opened the processor screen. The clamp then came down and smashed his left-hand little finger. His fingertip had to be surgically amputated.",0
"An employee was running products and laying parts down for sensors to operate. The employee stood a part up, which bypassed the sensors. Four parts were in the catcher and one was being crushed in the machine. The employee attempted to pull the part out and his ring finger was amputated by the stamping machine's lock seamer.",0
"An employee was reorganizing a janitorial closet. The employee moved a 5-gallon container of floor stripper from a shelf. The cap was loose and the floor stripper spilled on the employee's chest, left arm, and left foot, causing chemical burns. The employee was hospitalized.",1
"An employee was removing cheese product from a mixer exit when the rotating auger caught the employee's right arm, fracturing the right wrist and forearm and causing a laceration.",1
"At approximately 2:30 PM on August 6, 2016, an employee fell off the roof of a commercial building into a keg of hot tar and suffered burns to approximately 70 percent of his body. He was hospitalized.",1
"As an employee was verifying that the air pressure on a die-cast machine was at the correct level, the valve actuated and amputated the employee's third right-hand distal phalange.",0
"Around 10:00 AM on 8/12/2016, an employee was sweeping when he began having cramps. He was hospitalized for heat-related symptoms and dehydration.",1
"An employee was helping attach a jib to a mobile crane by pushing on the jib. The jib was laying on the tip of the fork. The jib fell and hit the employee on the head and shoulder, and then landed on his foot, breaking three toes and two metatarsals in his left foot.",1
"An employee was rolling fiberglass and was not feeling well. When other workers helped her sit down, she suffered an altered level of consciousness. She became severely lethargic and was cold and clammy to the touch. She was hospitalized overnight for heat exhaustion.",1
"An employee suffered a smashed right index finger while operating a tube-bending machine, requiring hospitalization.",1
"An employee was connecting a pipe to a wellhead. The pipe separated under pressure and struck the employee, fracturing the employee's ribs and leg.",1
"An employee was emptying trash from a 55-gallon drum into a larger trash bin when his left middle finger was caught between the trash drum and the large trash bin, clipping his finger.",1
An employee slipped off a conveyor railing while leveling cheese and his hand entered the tumbler resulting in a partial amputation without bone loss to the right pinky fingertip.,0
"While troubleshooting a machine, an employee leaned against an adjacent hopper machine and propped himself up with his left hand. The hopper housing moved under his weight and pinched this thumb, fracturing bone and amputating his thumb tip.",0
An employee fell approximately 12-13 feet off of a roof and suffered a broken hip that required surgery and four broken ribs.  Fall protection was not used at the time of the incident.,1
An employee fell off of a roof while cleaning a window and landed on a concrete wall. The employee was hospitalized with broken ribs.,1
An employee was lowering a 300-pound refrigeration compressor from the tailgate of a pickup truck to a steel dolly with a helper when the employee's finger was caught between the compressor and the dolly. The employee suffered a bone fracture of the right pinky finger and an open wound on the top and bottom of the pinky.,1
"An employee was working at the baler/hogger shredding up corrugated boxes when a jam occurred. The employee used a metal pipe to try and clear/unjam the hogger when his right hand was pinned between the pipe and hogger's door frame, fracturing his third, fourth, and fifth fingers.",1
"On Saturday, August 13, 2016, around 4:15 p.m., an employee was attempting to clean the push arm of a conveyor when a positioning device activated and caught the employee's right middle finger, amputating approximately 1 centimeter.",0
An employee had just finished making a delivery and was sitting in his truck getting ready to drive to another store when an assailant shot the employee in the left cheek and shoulder. He was hospitalized.,1
"On August 13, 2016, at 4:30 p.m., an employee became ill while delivering mail in a company vehicle. The employee was hospitalized for heat exhaustion.",1
"An employee fell while ascending a ladder to replace a service drop, breaking the right arm and left hand.",1
An employee received electrical burns to both hands and the left forearm while pulling wires from an energized breaker panel.,1
A maintenance employee was hospitalized after cutting into a live 480 VAC circuit and suffering an electrical shock.,1
An employee fell and hit her head while assisting a resident who had fallen.,1
"An employee tripped over a parked lift truck fork and fell to the floor, suffering a fractured hip that required hospitalization.",1
"An employee was testing the spark plug on a mower during repairs when the mower leaked gas and ignited, causing first through third degree burns below the knees on both legs.",1
An employee was performing well test operations and experienced heat exhaustion. The employee was hospitalized.,1
"An employee operating a forklift was lifting a small dumpster on a 1- to 2-degree slope when the forklift tipped over. The employee jumped out of the forklift during the descent and was struck on the right calf by the overhead bars, suffering tissue and ligament damage.",1
An employee moving a patient felt throbbing pains in her lower back and was hospitalized with a back sprain.,1
"An employee slipped in a pool of water approximately 3 inches in diameter and fell to the floor, breaking her right femur and requiring surgery.",1
"An employee became ill due to heat-related illness while delivering mail, requiring hospitalization.",1
"An employee was repairing a motorized tarp on a side-dumper semi-trailer when his fingers became caught in the drive chain and sprocket, amputating his left ring finger to the first knuckle.",0
"An employee climbed up onto the workover rig to secure the mast and lost his balance. He slipped and fell to the ground, fracturing his left orbital bone.",1
"An employee struck a yellow post while attempting to make a U-turn in the parking lot, dislocating and fracturing the right wrist.",1
"An employee walking on a sidewalk lost his balance and fell to the ground, breaking his lower left leg and dislocating an ankle.",1
"On August 13, 2016, an employee fell while descending an A-frame ladder leaning against the wall of an overhead platform, requiring hospitalization.",1
An employee was closing the bank vault door and got their finger caught in the door resulting in amputation of the left ring fingertip.,0
"An employee was checking the oil on the reefer unit of a trailer. A third-party tractor did not see the employee and pinned the employee between the tractor and the trailer. The employee suffered broken ribs, a broken sternum, and a collapsed lung, requiring hospitalization.",1
"An employee working behind the fragrance counter turned around and tripped over a box, falling to the floor and fracturing an arm.",1
"An employee experienced heat stress symptoms after engaging in production work, requiring hospitalization.",1
"While standing on a step stool to stock shampoo on a shelf, an employee fell and struck the right arm on the concrete floor, fracturing the upper arm.",1
An employee's left pinky finger was partially amputated.,1
"On 8/14/16, at 0800 hours, an employee was climbing stairs when he felt a sharp pain in his lower back shooting down his leg. The pain worsened and he was hospitalized.",1
"While stacking a produce cart in the produce cooler, an employee slipped on a strawberry on the floor and was injured requiring hospitalization.",1
An employee was retrieving a piece of meat from under a deli slicer when her right ring fingertip made contact with the blade and was amputated.,0
"An employee was using a hardwood pole to clean a furnace's tap channel when molten metal slag suddenly released from the furnace, burning the employee's hands, head, face, left ear, lips, and mouth.",1
"While hooking up cargo (wood pulp) in a vessel, an employee walked into one of the landing gear legs of the spreader bar, knocking his hard hat off and causing his head to go backwards. His neck and right arm became numb and he could not move his right-hand fingers.",1
"An employee was grinding salmon in a meat grinder when a piece of salmon became stuck to the side. When she attempted to dislodge it, her right middle finger was caught in the grinder blades, amputating her fingertip and requiring reattachment surgery.",1
"After working all morning, an employee began to have cramping and feel ill. The employee later collapsed and was hospitalized for heat-related illness.",1
An employee broke the bone and lacerated his right thumb in the locking mechanism on a trailer tongue.,1
"An employee fell off a ladder while installing lightning protection on the roof, fracturing a left rib, the left tibia, and an ankle.",1
An employee was repairing a metal roof. The employee stepped on a glass skylight. The glass broke and the employee fell 12 feet to the floor below fracturing his left hand.,1
"An employee was putting up wall boards while working from a ladder when he fell and landed on a screw gun, injuring his right arm and triceps.",1
An employee fell onto gravel and lacerated his head. The employee was hospitalized.,1
"An employee was pulling out a vacuum when she fell over a box of paper, hitting her head on the concrete flooring.",1
"Am employee was walking by a steam cooking kettle and slipped on the water that was on the floor, breaking the hip and bruising the wrist.",1
An employee's right index fingertip was smashed and amputated before the first joint while cleaning chicken parts out of a machine conveyor area.,1
"An employee was trimming excess yarn off of the package. The excess yarn became entangled in his hand and fell back through the guide slot in the guard as the employee was cutting it. After falling through the guide slot, the yarn began to wrap around the over feed, pulling his hand against the guard causing the amputation of the left thumb, a laceration on the left pinky finger, and crushing the left ring finger.",1
"An employee was using an 8-foot ladder when he slipped. As he reached to catch himself, his little finger was caught on a shackle, amputating it.",0
"While trying to manually rotate a forms shaft, an employee slipped and fell, breaking a finger and requiring stitches.",1
"An employee began experiencing heat-related illness and cramping due to high temperatures, humidity, and dehydration, requiring hospitalization.",1
"An employee was sitting in a vacuum truck that was next to a tanker trailer containing hot water. The trailer's legs sank into the ground and the tank rolled, allowing water to splash through the driver side of the employee's truck. He suffered second degree burns to his left arm and left leg.",1
"An employee slipped and fell from an extension ladder while installing gutters, breaking the pelvis/hip.",1
"While moving an aerial lift, an employee came in close proximity to a powerline. The power line arc-flashed and the employee sustained an electrical shock, requiring hospitalization.",1
"While delivering letters and packages, an employee went up a set of stairs to a customer's house and rang the bell. Suddenly, the employee passed out due to dehydration and fell down the stairs, puncturing his left lung and fracturing a rib. He was hospitalized.",1
An employee was kneeling and nailing shingles on a roof when a nail struck his right knee. He was hospitalized for surgery.,1
"An employee experienced heat stress while performing bridge work in 86-degree weather, requiring hospitalization.",1
"An employee was riding a horse on the trail when the horse disturbed a bee's nest. The bees stung the horse, causing the horse to buck and throw off the employee. The employee landed on a jagged stump and sustained lacerations to the left forearm, and possibly sustained rib and spleen damage.",1
"An employee was troubleshooting the baler machine. When he opened the electrical controller for the baler, he received an electrical shock to his right hand.",1
"On August 15, 2016, an employee was trying to unjam the reel stop on a paper machine when the machine suddenly activated. The employee was caught between the piece of equipment, injuring his shoulder and neck. He was hospitalized.",1
"An employee was observing equipment being offloaded when a piece of wood bounced out and hit his thumb, amputating the tip.",0
"An employee was attempting to cut a zip tie from a fence post with a knife. The knife slipped and struck the employee's left forearm, lacerating it and requiring hospitalization.",1
"An employee was operating an overhead hoist using ""J"" hooks when his left middle fingertip was pinched between a shaft and a ""J"" hook. He suffered a partial amputation of his left middle fingertip and a possible fracture of his left ring finger.",1
"An employee was oiling the production line conveyor during routine preventative maintenance when a rag he was using was pulled into the conveyor along with his left middle finger, partially amputating his fingertip.",0
"An employee was putting product away in the warehouse using a pallet jack when he lost control of the pallet jack and dismounted. His right leg collided with the pallet jack, fracturing his fibula.",1
"An employee was coming out of a mushroom barn when a small fan's (used for circulation) cover fell off and landed on his head, cutting it open. He was hospitalized and required staples.",1
"An employee was loading an asphalt kettle when the asphalt splashed on and burned his hands, face, and chest.",1
"An employee was talking to a coworker on the west side of the drive aisle. After finishing the conversation, the employee crossed back over to the east side of the drive aisle and was struck by a fork truck driving forward with a single material container. The employee was knocked to the ground and was struck a second time when the material container slid off the forks. The employee suffered a right thumb fracture, right tibia fracture, and lower leg scratch.",1
"An employee was changing a tire when his finger was caught between the tire and the wheel brake, breaking it.",1
"An employee was using an electric pallet jack and was backing up when his foot contacted a rail. His foot was crushed between the pallet jack and the rail, breaking a bone in his foot and requiring overnight hospitalization.",1
An employee fell 5 feet from a ladder while removing plastic from a locomotive engine.,1
An employee was setting up a plastic pipe on the fusing machine when the ring finger on his left hand was caught and amputated between the mechanism of the fusing machine and the plastic gas pipe.,1
An employee felt ill while delivering mail and was hospitalized for heat illness.,1
"On August 15, 2016, at approximately 11:00 a.m., an employee was constructing a storage tank. The employee was standing on grating that surrounded the tank and at a height of approximately 47 to 48 feet. Because there were no railings, the employee wore a full body harness and was tied off to the structure. While he was tightening a bolt, the ratchet slipped off and he fell from the grating. During the fall, his right arm struck the structure, amputating his right ring finger and lacerating his arm. He was hospitalized.",1
An employee fell while exiting a truck. The employee suffered a head injury and was hospitalized for treatment.,1
An employee was driving a forklift and suffered a medical emergency. The employee fell off the forklift striking their head and face on the floor fracturing facial bones.,1
"An employee was cutting tubing on a cutter when the tubing slipped out of place. She used her left hand to hold it in place. When the blade was activated, it amputated her left index fingertip.",0
"An employee was working on a project on site. He was cutting trim with a circular saw when the trim piece slipped and he tried to keep it from falling. In the process of grabbing the piece of falling trim, his left index fingertip was amputated.",0
"An employee was driving a forklift when the wheel hit a wet spot. The forklift then slid toward another forklift, and his foot was pinned between the two forklifts.",1
"An employee was installing a car tire on a steel rim when the tire iron dislodged and struck the employee in the left eye, requiring hospitalization.",1
"An employee was using an electric pallet jack to put a load on top of a conveyor when the forks of the pallet jack became stuck on the conveyor and lifted the back of the pallet jack. The back of the pallet jack then landed on the employee's right foot, causing fractures.",1
An employee tripped over another employee's foot and fell fracturing a hip.,1
Employees were removing old fire hydrants from a large metal box. One employee climbed inside. A grapple crane picked up the employee. The employee suffered a broken pelvis and a puncture wound to the leg. The employee was hospitalized.,1
An employee was operating a forklift and suffered a seizure. The employee fell out of the forklift and struck his head on the concrete floor causing lacerations  to the head and tongue.,1
An employee slipped on a clear plastic footwear hanger and fractured her left knee.,1
"An employee was operating a barge with two steel beams stacked on the deck. As he approached another barge, he slightly tapped it. When he tapped the barge, the top steel beam slid and pinned him against a wall, injuring his torso and requiring hospitalization.",1
"An employee was operating a panel line machine. When he attempted to clean dirt off a panel of sheet metal, his fingers were caught in the rollers of the machine, crushing bones in his left middle and ring fingers. His middle and ring fingertips had to be surgically amputated.",0
"An employee was removing a solidified plastic plug from the plastic injection port of a molding machine when pieces of hot plastic contacted the employee's skin, causing thermal burns to the right forearm.",1
An employee had removed money from a safe in the office area and was closing the safe door when her hand was crushed between the safe door and the door jam. Her right thumb was partially amputated.,0
"After handling materials in the environmental heat, an employee started experiencing heat-related illness symptoms, including cramping and nausea. The employee was hospitalized.",1
An employee was installing a cable outside a customer's home using a 6-foot ladder when he fell from the ladder and broke his left tibia.,1
An employee was feeding rebar coil into a coil bender machine. He was trying to free a jammed coil from the measuring wheel with a screwdriver when the tool became jammed in the measuring wheel. This caused the coil to snag his glove and drag his thumb and index finger back into the transport wheels. His right index finger was partially amputated.,0
An employee fell and twisted an ankle while setting up an extension ladder.,1
"An employee was pulling a piece of wood (with her right hand) that was wedged under the board stop when a board slammed down on her hand, severely lacerating her right index finger and amputating the fingertip.",1
"An employee was re-entering the building when he fell on a wet, slippery surface. He fractured his hip and was hospitalized.",1
"An excavator struck an employee, pulling the employee's left ankle under the right track of the machine. The employee was hospitalized and required surgery for a left ankle fracture.",1
An employee was adjusting a pedestal fan when his fingers went through a gap on the underside of the fan and contacted the running blades. His left middle finger was amputated and his index finger was cut.,0
"An employee fell from a scaffold after a cable line broke, breaking his leg and requiring hospitalization.",1
"An employee was bitten by a venomous rattlesnake while pulling out weeds, suffering a hand laceration.",1
"An employee stood up from the sitting position and fell to the floor, breaking both femurs.",1
"An employee was cleaning fiber from vacuum tubing that had a cut-off valve (piston). The piston closed on his hand, amputating his left-hand index fingertip.",0
An employee fell approximately 12 feet from a pruning ladder while pruning a shrub. He was hospitalized for a fractured collarbone and three fractured ribs on his left side.,1
"An employee was climbing a tree to remove some limbs when the limb his climbing ropes were attached to broke. He fell at least 20 feet to the ground, suffering significant injuries and requiring hospitalization.",1
"An employee slipped and fell while descending from a damp porch at a residence, rupturing a quadricep tendon in the left leg.",1
An employee suffered a pinky finger amputation while repairing a case sealer.,1
"On August 16, 2016, at approximately 10:59 p.m., an employee was attempting to fix a sensor inside the enclosure of a laser weld cell. While the employee was inside the enclosure, a carrier that moved parts into the welding machine moved and struck the employee in the left leg, puncturing the left thigh.",1
Two employees were trying to do preventive maintenance on a line. The line broke and they were exposed to hexane spray on their faces and in their eyes. One employee was hospitalized.,1
An employee was inspecting welds on parts when the parts that he was standing on began to tip over. He jumped to the floor and fractured his ankle.,1
"An employee was positioned at the base of the pole, aligning it into the correct position. As the employee was stepping forward, a chain hoist fell from an overhead bucket truck/personnel lift, striking the employee on the hard hat. He suffered a fractured C1 vertebra and was hospitalized.",1
An employee was shimming a hand (manual) header when his left hand was caught and crushed between the ram and the blocks.,1
An employee was restraining a resident and suffered a heart arrhythmia.,1
"An employee was in the shop using a permanently mounted punch machine, which makes 1-2"" diameter holes in steel, and amputated his left index fingertip.",0
An employee suffered from heat exhaustion and dehydration while driving.,1
An employee was reaching into a flour hopper when his left hand became pinched in a pneumatic gate and was amputated.,1
An employee received a deep laceration on his thumb while using a circular saw to cut wood.,1
An employee was using a wrench to disconnect a nut on a cable on the back side of the switch gear when an arc flash occurred. The employee received second and third degree burns to his hands and both knees.,1
An employee was delivering mail and began to fell unwell. She was admitted to the hospital for heat stress.,1
"An employee was rigging to lift a spring can that weighed approximately 250 pounds using a hoist hook. His left hand entered the hoist hook's point of operation, crushing and breaking his left thumb.",1
"An employee fell to the ground while climbing out of his truck, fracturing his lower back.",1
An employee had just dropped off a co-worker at the main gate and was returning back to the office when he suffered a seizure and lost control of the company pickup and struck a tree.,1
"An employee was operating a 10-inch table saw to cut a piece of 1/4-inch plywood when the plywood kicked back and caught his finger. Due to the extent of the injury, his left index finger had to be surgically amputated.",0
"An employee was moving a 1,000-pound coil of metal using a floor crane when the coil fell off the crane and landed on the employee's lower legs, contusing/crushing them from the knees to the ankles.",1
An employee became dehydrated while landscaping.,1
"An employee fell from a crate while drywalling, lacerating his eyebrow.",1
"An employee was moving a part while a die-cutting machine was idle when his hand slipped underneath the machine and struck the chain and sprocket, partially amputating his left-hand pinky fingertip and nail.",0
An employee fell 8 feet from the top of a water clarifier that was being constructed for a water treatment facility.,1
"An employee was operating a mixer when he noticed the overhead bin was blocked. He climbed a ladder to attempt to loosen up the blockage but fell backwards off the second rung, severely injuring his ankle and requiring surgery.",1
"On 8/17/16, an employee was helping to remove swabbing tools from an oil well when the swab lubricator pipe fell onto his hands, amputating his right thumb and injuring his left thumb and pinky finger.",0
"An employee was checking a sensor on the powder-compacting press. He placed a step ladder on top of the machine, which was approximately 6 feet above the ground. He then fell into the press pit, injuring his spine. The total fall distance, including height of the machine, step ladder, and the depth of the press pit, was approximately 24 feet to the bottom of the pit.",1
"An employee was hanging parts on the conveyor line all day. The employee later began vomiting and experienced nausea, requiring hospitalization for heat stress.",1
An employee was holding a stake in place while a coworker used a sledgehammer to strike it in place for forming. The employee lost his balance and held onto the stake at the same time that it was being struck by the sledgehammer. The sledgehammer struck and broke his left index finger.,1
"An employee was standing on a 16-foot A-frame ladder replacing an insulated glass unit (IGU) at a private home. He was standing about 10 feet up on the portable ladder when he was exposed to a gust of high wind. He lost his balance and fell to the ground, breaking two bones in his left leg. He was hospitalized for surgery.",1
"An employee was preforming maintenance on a dryer and was greasing the gears when his right middle finger was caught between the gears, amputating his right middle fingertip.",0
"An employee was operating a pallet jack when the equipment backed over her left leg, breaking the tibia and ankle.",1
"An employee was cooking scallops in the kitchen when hot grease contacted her arm and hand, causing second degree burns and requiring hospitalization.",1
"An employee was helping a coworker move a ladder when it fell and struck his face, fracturing his cheekbone.",1
An employee was attempting to remove a bucket attachment from an excavator when his right middle finger was caught between the attachment and the attachment point. His fingertip was smashed and subsequently amputated.,0
An employee was installing guttering at a commercial construction site when he fell approximately 28 feet to the ground. He was hospitalized with a fractured vertebra and required surgery.,1
"An employee was taking the chain off a cage that stored concrete foundation forms. When the chain was removed, the forms fell on the employee, breaking his left hip and ankle.",1
"An employee was cleaning up trash and had his hand on the outside of the table when someone moved the table and it pinched his fingers, amputating his right middle finger to the first knuckle.",1
"An employee was loading paper onto a railcar. He had a clamp truck loaded with two rolls of paper suspended approximately 24 inches on a dock plate from the railcar floor. The top roll of paper slipped off the clamp truck and hit the employee on his lower left leg, breaking it. He was hospitalized.",1
An employee was driving an unloaded forklift when the forklift came into contact with a railcar staged at the dock. The employee's arm was caught between the railcar and the lift's roll cage.,1
"On or about August 17, 2016, an employee was using a router when the piece slipped and amputated the employee's left middle finger.",1
"An employee was installing solar panels from a ladder. When he stepped down from the ladder, he was hit by a trailer that was passing by, breaking his right leg.",1
"An employee on a ladder was running cable through the drop ceiling when she began to spin around the ladder, became unstable, and fell. She fell to the ground and suffered multiple contusions, two broken ribs, and a chipped bone in the back.",1
An employee was climbing a tree over a fence when he fell off the tree and struck the fence. He sustained broken ribs and possibly a ruptured spleen.,1
"An employee was operating a stand-up powered industrial truck when the throttle became stuck. The employee jumped from the powered industrial truck, falling and fracturing the hip.",1
"An employee's thumb was pinched and lacerated between the rollers of a folding machine, requiring hospitalization.",1
"An employee was operating an off-road UTV on a dirt/gravel road when he lost control and the vehicle rolled onto its side, fracturing his left leg. He was wearing a seatbelt. He was hospitalized for surgery.",1
"On August 17, 2016, around 11:15 a.m., an employee was leaving a client's house when her leg gave out and she fell on the concrete sidewalk. She fractured her right wrist and right elbow, requiring surgery.",1
"An employee was preparing a no-bake sand mold. When the molten metal was poured into the mold, the aluminum ran through the lifting hole and entered the employee's right shoe, burning his foot and requiring surgery. He also suffered burns on both hands while attempting to remove his shoe.",1
"An employee was using an extension brush to paint over a group of racking uprights. The uprights started rocking back and forth and one of the uprights fell towards him, causing four more to fall. The employee's leg was pinned under the four uprights. His leg was broken and required surgery.",1
"An employee was finishing concrete in a man lift under a bridge. When the man lift was raised, his arm struck the bridge beam and broke.",1
"On August 17, 2016, at approximately 12:15 a.m., an employee was moving bundles of paper into a strapping machine by hand using a motor-driven roller line. While attempting to remove a paper from the line, the employee's right hand and arm were pulled into the live rollers. He was hospitalized with a fractured right arm.",1
An employee sustained a right index finger amputation while cutting all-thread pipe using a portable band saw.,0
"An employee was removing lagging from the inside of a building. While up in the air, he brushed up against the overhead crane bus bar and received an electrical shock. He was hospitalized.",1
An employee was cut on the left hand while making a plunge cut.,1
"While installing a stone veneer on a chimney, an employee fell approximately 8 feet from the roof, suffering a broken left ankle and wrist and a fractured pelvis. The employee was hospitalized.",1
"An employee was tarping a load when the tarp rope broke, causing the employee to fall and break both wrists.",1
An employee flagging traffic was overcome by dehydration and lost consciousness. The employee was hospitalized.,1
"On August 18, 2016, an employee was hospitalized for dehydration after working outdoors all day in 90-degree weather.",1
While working in the freezer an employee had a seizure and fell hitting his head.,1
"An employee was standing on a 6-foot ladder while fueling a small commuter plane when he fell off the ladder and contacted the concrete deck, suffering severe facial swelling.",1
"An employee was cleaning the rollers of a vane machine when his right index finger became caught in the rollers, amputating it to the first knuckle.",0
"An employee was installing a fan belt while another mechanic was rotating the sheave by hand to walk the belt on. The injured employee's glove became caught between the belt and the motor sheave, and the employee's fingertip was pulled between the belt and sheave, amputating it to the first joint.",0
"At approximately 7:30 a.m., an employee was working around a flower bed, pulling weeds at a recreation center, when he was bitten by a snake (copperhead) on his right hand/ring finger. He was hospitalized overnight due to severe swelling.",1
"On or about August 18, 2016, an employee was closing the gate of the bullpen when fork extenders that were leaning on the gate fell, landing on and breaking his ankle. He was hospitalized.",1
"An employee was pulling a cart with parts on it when she tripped and fell, fracturing her hip.",1
An employee was moving a filing cabinet when it fell on his finger.,1
An employee was using a safety tool designed to unstop a paint sprayer (spray gun) when the gun blew paint out the front or side and injected it into the employee's fingertip. He underwent surgery to remove the paint/debris.,1
"While descending a ladder, an employee missed the bottom step and fell backwards, suffering a fractured hip.",1
"An employee was helping a co-worker to move a pallet that was in the way of the forklift. A cooler weighing approximately 3,000 lbs. that was on the forks of the forklift fell onto the employee's right hip and leg fracturing the hip. The employee was hospitalized.",1
"An employee fell off a portable ladder while fixing a machine, breaking three ribs and puncturing a lung. He was hospitalized.",1
An employee suffered a back injury while securing a strap on a trailer with a ratcheting strap and bar.,1
An employee was standing on a pallet as it was being lifted 6-feet high when he fell off and broke his wrist.,1
"An employee was operating a paving machine and was backing up in a closed lane when a truck swerved into the closed lane. The truck's side mirror struck the employee knocking him to the ground. He struck his head on the pavement, and the truck ran over his right wrist fracturing it.",1
An employee's glove was caught in the tubing while making connections with tubing tongs. The employee's arms were twisted around the tubing resulting in injuries to his arms and hand.,1
An employee slipped and fell on a wet floor while going to get water and injured her left knee.,1
An employee lost consciousness after dispensing herbicide from bulk tanks to totes. The employee was hospitalized for dehydration.,1
"On August 18, 2016, an employee was ripping plywood when the material kicked back and pushed his hand forward into the rotating blade of the saw, amputating fingers.",1
An employee was driving a stand-up type forklift down an exterior ramp between two warehouse buildings carrying carts. The employee lost control of the forklift and his left foot/ankle was caught between a column and the forklift fracturing the foot/ankle.,1
"On or about August 18, 2016, an employee was standing on a desktop while screwing an LED bulb into a new light fixture when he fell 39 inches to the floor below. He was hospitalized for a back injury.",1
An employee tripped and broke her leg while walking.,1
"An employee was inside a customer location checking a phone line when he fell off a 6-foot ladder and hit his head, suffering a concussion.",1
An employee was in an aerial lift bucket pushing a pine tree when he fell from the bucket and was suspended by his harness/lanyard 6 feet from the bucket. He sustained two crushed discs and was hospitalized for surgery.,1
An employee was removing an old roof when he experienced heat stress. He was hospitalized for severe dehydration and required overnight hospitalization.,1
"An employee was working in a trench when it collapsed on the employee, breaking the employee's femur.",1
"While walking to the mattress department for a customer service call, an employee tripped over ripples in the carpet and suffered a broken left femur, requiring surgery.",1
An employee was loading baggage onto an aircraft when he cut his right ring fingertip (with possible partial amputation) on a sharp edge of the aircraft.,1
An employee was driving a small tug machine called a mule when he ran into a pole and suffered a broken shin bone.,1
"An employee was delivering residential appliances. Upon completion of one job, the employee threw the empty dolly into the back of the delivery truck. A burr on the dolly handle caught on the employee's glove, fracturing and lacerating the left ring finger.",1
An employee was delivering furniture when he started having severe cramps. He was hospitalized for dehydration.,1
"An employee was pushing a chair with wheels into a conference room. The employee's knee ""popped"" and she fell. The employee suffered a knee injury that required surgery.",1
An employee was lifting product while stocking and injured his lower back.,1
An employee received an electrical shock and was hospitalized.,1
"On August 19, 2016, an employee fell from an extension ladder and hit his head on the floor. He also broke a tooth and injured his ribs and wrist. He was hospitalized.",1
An employee was cutting PVC pipe with a miter saw when the blade cut his left hand from his index finger to the wrist.,1
"After doing touch-up painting work on the outside of a condominium, an employee became ill and was hospitalized for possible heat-related injuries.",1
An employee was trying to unbind a conveyor chain by turning the drive pulley backwards. The chain jumped causing his left thumb to become caught and amputated in the chain and pulley.,0
An artillery simulator blew up in an employee's face while the employee was conducting a platoon movement exercise. The employee was hospitalized with scars and blurred vision.,1
"An employee exited the cab of a truck when the truck began moving. He attempted to stop the truck and became pinned between the truck door and roll-up door, suffering a broken pelvis.",1
An employee was working with a client in his home when the client stabbed the employee in the back. The employee was hospitalized.,1
An employee fell off a 4-foot ladder and hit his head.,1
"An employee was taking an electric walking jack out of a trailer when the electric jack, the employee, and the dock plate fell to the ground. The employee suffered a broken leg, requiring surgery.",1
"An employee was checking an air vent that was close to rollers to see if heat was coming out of it when he stumbled/lost his balance and fell forward. His hand went into the rollers, amputating four fingers.",1
An employee who was cleaning the parking lot area was struck by a customer's vehicle.,1
An employee was hospitalized with a bruised right hip after tripping on some steps while retrieving an instrument panel.,1
An employee's hand was caught in a machine's pinch point.,1
"On or about August 19, 2016, at approximately 9:00 a.m., an employee fell from a height while performing tear-off of a roof on a 2-story residence, suffering a serious back injury.",1
"On August 19, 2016, an employee was repairing a chain when the actuator pin on the chain caught his finger and pulled his hand into the sprocket. His right-hand middle and ring fingers were amputated at the first knuckle.",1
An employee was pushing a garbage dumpster and began to feel lightheaded. The employee blacked out and fell to ground. The employee complained of pain in his left arm and was admitted to the hospital.,1
"An employee was setting up a vertical lathe machine. The employee was adjusting the tool holder when it dropped, striking the employee's left pinky finger and amputating the fingertip.",0
"An employee was injured while hooking up two pieces of steel when the pig tail hook became caught on a beam on the ground, which rolled the beam onto the employee's leg.",1
An employee was using a pressure washer and lacerated a finger.,1
"An employee was part of a crew moving a helicopter from the ground to a flatbed truck using a crane. The employee intended to step from the helicopter to the truck bed. He lost his footing and fell to the ground, suffering a severe head injury that required hospitalization.",1
"An employee suffered a lower back injury while leaning over and attempting to lift a patient's legs, which were hanging over the bed.",1
An employee who was troubleshooting a level transmitter was found unconscious within the vicinity of a suspected hydrocarbon (H2S) release.,1
"An employee was loading an excavator onto a trailer when the excavator slipped, trapping the employee between the rail of the trailer and the excavator track. The employee suffered a broken pelvis and an abdominal wall hernia.",1
Employee was in the lunch room when she fell to the ground while walking.,1
"An employee was repairing a seam weld on a combine head wheel when the wheel moved into position on the hub and landed behind the steel toe protection on the employee's footwear, crushing the employee's toes/foot.",1
"An employee was driving a golf cart on the pier when she was hit by another vehicle, causing her to fall out and fracture her neck. She was hospitalized.",1
"While cutting pork with a vertical band saw, an employee suffered a left index finger amputation.",0
"On 08/19/2016, at 11:30 p.m., an employee was helping a patient during flood conditions within the home. The employee was electrocuted when an energized item fell off a dresser into the waist-high water, requiring hospitalization.",1
An employee was beaten by a patient with a chair.,1
"An employee was pulling a glass from the glass rack. The glass hit the counter and broke, severely lacerating the employee's right wrist.",1
"An employee was assisting a transportation driver who was catering a flight. He directed his coworker to secure the catering carts in her truck while he closed the aircraft door. When he proceeded to lower the handle of the aircraft door, his right pinky finger was caught between the handle and the hinge of the handle, amputating his fingertip.",1
An employee was feeding material into an extruder when his right finger(s) were caught and amputated in the machine.,0
"On or about August 20, 2016, at 5:30 p.m., an employee was helping another employee to move a mold to be repaired on the 18-station blow molder when his right pinky finger was caught in the machine. His pinky fingertip had to be surgically amputated just past the nailbed.",0
"Employees were cleaning a secondary breaker, 440 volt. A 13.8kv inlet seed is a higher volt that transforms it down to a 440 volt.  An employee was walking in the area and got close to the 13.8kv inlet seed and received third degree burns on his hands and lower arms.",1
"An employee was working the serving line in the kitchen. The AC went out and the temperature rose to 87 °F. The employee felt hot and went into the freezer to rest and cool down. She was found unconscious at 6:20 p.m., on 8/20/2016, due to dehydration.",1
"A horse was in a horse ring and was hooked to a carriage. The horse became spooked and started running, broke free of the reins, and attempted to exit the horse ring. An employee entered the horse ring to try and calm the horse. The horse struck the employee, who suffered a serious neck injury that required surgery, abrasions, contusions, and lacerations to the thighs/arms.",1
"An employee was positioning a heavy steel ""dog bone"" on a flat surface when the steel crushed and amputated his right little fingertip.",0
"An employee was dumping trash and getting supplies while holding a door open. The door released and smashed his right pinky finger, fracturing it and requiring surgery.",1
"An employee was helping a forklift operator straighten the cardboard dust cover on a pallet. The top three pallets in the stack collapsed, causing several hundred cans of green beans to fall on the employee, breaking both of his lower legs.",1
"An employee was using a knife to cut chicken when the knife cut his finger, resulting in the amputation of his left index fingertip (no bone loss).",0
"On August 20, 2016, an employee working on a capper slipped on water on the floor. While trying to catch himself, he hit his hand on a roller on the machine, fracturing and lacerating his hand. He required surgery and was hospitalized.",1
An employee was attempting to descend from a scaffold that tipped. He fell 5.5 feet from the scaffold onto a 3-foot ladder and suffered a laceration.,1
An employee was hospitalized due to possible heat stroke while picking lemons.,1
An employee fell 5 feet from a ladder and injured his wrist.,1
"On August 21, 2016, an employee was removing a locking pin in the bead room when the employee's left index finger was pinched and partially amputated between the drive shaft and locking pin.",0
The employee was delivering medication to a patient when the patient backed her into a wall and repeatedly started punching her. The employee suffered a fractured nose and seizure due to the incident.,1
"While removing rubbish from an operating potato conveyor, an employee's hand was caught between the belt and roller. The employee suffered a broken wrist.",1
"An employee was frying food when he tripped and his hand submerged into a deep fryer, burning his left arm.",1
"On August 21, 2016, an employee was sorting boxes on a mezzanine. The employee leaned against the gate in the loading area and fell approximately 8.5 feet to the warehouse floor. The employee was admitted to the hospital as a result of the fall for a concussion and seizures.",1
"An employee tripped over a pallet jack at the mail distribution facility, suffering several fractures/lacerations.",1
An employee was on an extended scissor lift tightening a bolt when the bolt broke and threw him between the top rail and the chain of the scissor lift. He fell 20 feet to the concrete below resulting in a head injury.,1
"An employee was removing a guarding panel on a conveyor belt. When the last bolt was removed, the panel swung down and amputated the employee's left ring fingertip.",0
"While preforming preventative maintenance on a machine, an employee's rag was caught. When the employee attempted to grab the rag, the employee's fingertip was caught and amputated in the chain and sprocket.",0
An employee was using an oxygen/acetylene torch to un-solder a copper line on an HVAC system when refrigerant oil or oil vapors in the system ignited and caused a flash fire. The employee sustained first degree burns to his left arm and minor burns to his face.,1
"An employee was repairing/installing insulation on top of a panel when he fell approximately 25 feet through the roof to the ground below, breaking his leg.",1
"While using a table saw to cut down plastic parts, the tip of an employee's glove was caught by the saw pulling the employee's thumb into the saw and removing the flesh from the very tip of the right thumb. No bone was removed.",0
An employee suffered an amputation while checking a new die.,0
An employee was trying to release materials caught in the knife area at the end of the flexible bagging machine when the guillotine knife blade amputated the first joint of the left index finger.,0
"An employee was removing plastic inserts from the back side of a precast panel. He was standing on a trailer, which had the precast wall on the bed. When he stepped out, he lost his footing and fell 4 feet to the ground on his right side, head and shoulder first. He fractured some right-side ribs and his collarbone, and his right lung collapsed.",1
"An employee was removing a flattening plate from a coordinate measuring machine (CMM). He positioned himself on the CMM table about 38 inches off the floor and was attaching a hoist chain for a forklift boom attachment when the 2-inch probe shaft impaled his body, requiring surgical removal.",1
"An employee missed a last step and tore tendons in the knee, requiring hospitalization.",1
"An employee was changing a roll on a packaging machine when a roll of paper became hung up on a frame. The employee attempted to free it by pushing on the roll. When it came free, the employee's right index finger was caught between the frame and the roll of paper, amputating it at the first digit just behind the nail.",0
An employee was welding pipe as part of a compressor change-out when pressurized oil in the pipe released and ignited. The employee suffered burns to his wrists and face and was hospitalized for treatment.,1
"An employee was working on the line, got bumped by another employee, stepped back and lost her balance falling and breaking her left wrist.",1
"While pouring concrete, an employee felt dizzy and lost his balance, possibly due to heat exposure, and fell backwards striking his head on an unknown object. He was hospitalized and required stitches.",1
"An employee was standing on the ground tightening a bolt with a wrench. The wrench slipped and the employee fell, fracturing his right hip.",1
"An employee was working in the freezer. As he pulled a pallet out of the freezer, he slipped and fell, fracturing his neck and injuring his shoulder.",1
"An employee was hospitalized due to chemical burns on his leg, abdomen, and mid-section.",1
An employee was hospitalized after a tire fell on his right leg.,1
"An employee was operating a brake press to bend a 10-inch piece of metal with the long end in the machine. His hand entered the point of operation, crushing and avulsing his left ring and middle fingertips, which had to be amputated.",0
"An employee was moving a mobile conveyor belt when his hand was caught between a roof support column and the conveyor, amputating his left pinky finger just below the nailbed.",0
"An employee was shearing a U-shaped piece of metal when the metal folded over and pinched his right index fingertip, amputating it.",0
"An employee was getting cleaning supplies from a storage area and was using a short step stool to reach products on elevated shelving. He fell while getting down from the step stool, injuring his hip and requiring surgery.",1
"An employee was moving materials from one shelf to another when materials fell from the shelf striking the employee and causing her to fall, fracturing her right patella.",1
An employee was cutting one single roofing paver that was not fitting properly at a doorway. He was using a handheld electric saw and the saw slipped and caught the employee's work glove cutting his thumb.,1
"An employee was standing on a ladder plugging in the garage door opener motor. He began to fall and grabbed the metal frame that holds the motor to the ceiling. When his hand contacted the metal, he sustained a laceration to the first knuckle of his left ring finger and his pinky finger was amputated.",0
An employee was walking around the facility taking readings when he stepped and fell into a U-drain. Hot condensation in the drain caused thermal burns on both legs below the knee.,1
"On August 22, 2016, an employee suffered a partial finger amputation while trying to unjam the hammer in the zinc mold department.",0
An employee was stung by a bee and experienced an allergic reaction.,1
"An employee slipped and fell on a wet floor, suffering a fractured left hip and requiring hospitalization.",1
"An employee was preparing to add a stiffener to a cross-brace and was loosening a nut on a bolt of the cross-brace. After the nut was removed from the bolt, the cross-brace moved and the employee's fall protection slid off the cross-brace. He fell approximately 45.6 feet to the ground, breaking his ribs, collarbone, and pelvis.",1
"An employee was operating a machine that had molds used to form concrete products. When he attempted to remove built-up product from the mold, he was struck by the moving mold. He suffered a broken nose and head laceration, requiring hospitalization.",1
"An employee was using a 5-inch pry bar with an angled end to clean glue off from a roller wheel when his left third finger was struck by the angled end of the tool, causing a laceration that required sutures and a partial amputation.",0
"An employee was on an 8-foot ladder hanging wire supports when he lost his balance, fell off the ladder, and struck the concrete floor, fracturing his elbow, hip, and vertebrae.",1
"An employee was caught between a forklift and a racking system, fracturing his pelvis and requiring hospitalization.",1
"An employee was torching a trash dumpster to dispose of the scrap metal when one of the sides being cut fell over and struck him, fracturing his pelvis.",1
An employee complained of feeling faint while working at the customer service window of the post office. The air conditioning was not working all day. The employee was hospitalized due to heat illness.,1
"An employee was setting a new die press for trail hits when the machine activated and the die came down on his left hand, amputating multiple fingers.",1
"An employee was trying to prevent a machine guard from falling onto the product on the machine when his hand was caught in the machine's pulley system, amputating his right middle finger down to the first knuckle.",0
"On 8/22/16, an employee suffered amputations to the thumb, index, and middle fingers on the right hand (just below the nails).",0
"An employee was working on the deck of the barge assisting with securing the dredge swing anchor. The employee placed his left hand between the anchor and the side of the barge. While lifting the anchor, the employee's left thumb was crushed and suffered a partial amputation (above the knuckle).",0
An employee tripped and his hand fell into the webbing of the razor slitter machine while it was running. Both bones in the right forearm were fractured.,1
"An employee had been working in a bucket truck doing overhead electrical line work all day. Later that evening, the employee started feeling ill and was admitted to the hospital for heat exhaustion.",1
An employee was walking down a hallway and was struck by a forklift that was moving bales of peat moss. The employee was caught between the peat moss bales and the wall resulting in a fractured rib and a lung hernia.,1
"While installing steel beams inside of an elevator shaft, an employee's left thumb was caught between two steel beam columns, amputating the tip.",0
"An employee was operating a press brake machine, stamping and bending parts, when his right thumb was caught and amputated in the machine.",0
"On August 23, 2016, an employee was welding a custom pipe when a gear or piece of the turn table failed and a pipe fell, crushing the employee's leg and lacerating a muscle.",1
"An employee was operating a front end loader inside of a cargo hold on a ship docked midstream. As he exited the cab of the loader, he lost his footing on the step and fell to the floor of the cargo hold, fracturing his right leg.",1
"An employee was stepping down from a 24-inch-high ledge with a safety cone when he lost his balance and fell to the ground, fracturing his right pelvis and requiring hospitalization.",1
"An employee fainted while on top of a ladder and fell approximately 10 ft. to the ground. The employee was hospitalized for fractured vertebrae, a fractured sternum, a fractured thumb, bruised lungs and bleeding in the brain.",1
"As an employee was driving his delivery truck, his hands began cramping possibly due to dehydration due to heat. He was hospitalized.",1
"An employee was taking paper weight sheet samples to the control room. While picking up fallen paper, the employee felt a sharp pain and heard a loud snap. The employee suffered spiral fractures of the right ankle and leg bones.",1
"An employee was servicing a propane dispenser using a drill when a flash fire occurred, burning his legs, face, arms, and abdomen area.",1
"On August 23, 2016, at approximately 4:15 PM, an employee passed out and struck his head on the floor due to heat stress.",1
An employee was walking and got their left foot caught on a portable set of steps that are along the bottom of the table on the north side. The employee attempted to break the fall and their right hand was caught in a machine amputating the right finger up to the first knuckle.,0
"An employee was punched in the jaw during a fight. He then fell and hit his head, requiring hospitalization.",1
"An employee was picking up trash at the site. At the end of the day, he started having cramps and not feeling well. He was hospitalized overnight for dehydration.",1
"An employee was cleaning a meat grinder's auger when the auger fell onto his hand, partially amputating his left pinky finger.",1
"On or about August 23, 2016, at 6:00 p.m., an employee was observing an apprentice associate on the reach truck during training. As the apprentice associate completed a transaction and was moving the reach truck to another aisle, the apprentice struck the employee, fracturing his pelvis and kneecap. He was hospitalized.",1
An employee was riding the alpine slide when he lost control and fell out of the sled. The employee suffered a concussion and a spider fracture in the neck resulting in hospitalization.,1
"An employee was using a hoist to move a ladle into place to be filled. Iron spilled off the ladle lid and fell onto the employees' right leg and foot, causing burns.",1
"An employee had just finished changing the oil in a compressor. He descended a small step ladder to the ground. When he reached the ground, he turned and tripped over the step ladder. He lost his footing and fell, striking his abdomen on a stock support roller and suffering a spleen injury.",1
"An employee was removing bearings from a cappers shaft when the bearing puller broke and a piece of the puller struck his left hand, breaking it.",1
An employee was servicing a deck engine to look for a coolant leak when a fan blade in the back of the radiator lacerated his left hand.,1
"An employee was changing spools on a wire drawing machine when his right thumb was caught between the lift structure and a spacer block, amputating the thumb tip (no bone loss).",0
An employee was lifting a bale on the deck of a ship and got a finger caught between the deck lifting eye and the bale resulting in partial amputation of the finger.,0
"As an employee was transitioning from a platform to a ladder, he lost his grip and fell backwards 6.5 feet. He fractured his left hip and left elbow.",1
Two employees were working on a press brake. One employee was caught in the press when it was activated. The employee's inside right forearm bone was injured and required surgery.,1
"An employee was moving stock using a pallet jack when the jack backed onto his foot, fracturing it.",1
"While packaging tacos on the taco line, an employee's right ring finger was partially amputated.",0
"An employee was on a ladder helping a third-party contractor test and repair an electrical fuse bucket when an arc flash occurred, burning the employee's right hand and left eyebrow.",1
"An employee was cutting a vertical pipe to remove a housing to a filter. After cutting the housing loose from the pipe, the employee removed the chain fall that had been used to raise the pipe. He attempted to shift the pipe slightly to replace the housing. The pipe fell straight down, striking and fracturing his left middle and ring fingers. He required surgery.",1
"An employee positioned a ladder on a cable strand. The strand was not able to support the weight of the employee and he fell 10 feet, breaking his right leg in two places.",1
"An employee was stacking boxes of documents on a pallet when he fell 16 feet through an opening in an adjacent guardrail to the concrete floor below. He fractured his right patella, left elbow, left wrist and humerus, facial bones, and left femur. He also suffered head lacerations.",1
"An employee attempted to hook up an anhydrous ammonia nurse tank to a farmer's truck hitch. The farmer reversed the truck and pinned the employee's right leg between the vehicle and the nurse tank, breaking his right tibia and fibula and injuring his right ankle. He was hospitalized for surgery.",1
"An employee was installing new utility lines. While cutting through an abandoned electrical line, he struck a live line and was shocked and burned, requiring hospitalization.",1
An employee was descending a step ladder and fell 5 feet onto the right hip resulting in hospitalization.,1
"An employee was securing loads of angle iron when his right ring finger was caught between the two stacks, amputating it below the knuckle.",0
"On August 23, 2016, at approximately 11:30 a.m., an employee was removing the sheath from a telecommunications cable 
using needle nose pliers. The pliers slipped and struck the employee's left hand between the index finger and thumb, causing a laceration/cut.",1
"On 08/23/2016, at 11:40 a.m., an employee was organizing accessories in a merchandise trailer when she fell off a step ladder and fractured her ankle.",1
"While walking over a skid, an employee's heel was caught in the skid. He twisted his ankle and fell, fracturing his left ankle and spraining his right ankle.",1
An employee began to feel tired and dehydrated. He later experienced severe cramps and was hospitalized with heat stress.,1
An employee was walking to his work station when he lost consciousness possibly due to heat stress and fell face first onto the concrete warehouse floor.  He suffered pain to his nose and lost two front teeth.,1
An employee was loading plywood onto a pallet to be lifted out of a tank. Three sheets of plywood fell on the employee causing the employee to fall and fracture the left tibia and fibula.,1
An employee was slicing meat on a meat slicer and amputated the tip of the ring finger.,0
"On August 24, 2016, an employee suffered a broken left thumb when it was caught in a pinch point between a chain on the dump box and the dump box when the dump box was actuated.",1
An employee was mowing around a bunker on the golf course. An irrigation flag or a stone shot up from the mower and struck the employee in the head.,1
"An employee was walking to his chair in a conference room, tripped, and fell breaking his right leg.",1
An employee fell three feet off a ladder and fractured the right ankle.,1
An employee was walking in the building and was struck by a fork truck resulting in an ankle injury requiring surgery.,1
An employee reached onto the top of a piece of equipment to get a tape measure and his thumb was caught in a pinch point resulting in amputation of the thumb between the knuckle and finger nail.,1
An employee was running underground conduit and began cramping. The employee was hospitalized for possible heat-related illness.,1
An employee was hospitalized for dehydration after working at a jobsite setting pipe and operating equipment.,1
An employee was replacing the push/pull solenoid on the sugar receiver and amputated the right index finger while attempting to remove debris from the solenoid.,0
An employee was cutting the zip tie off a bar using a utility knife and severely lacerated the left forearm.,1
An employee's arm was caught under the conveyor belt and broken.,1
"At approximately 1900 hours on 24 August 2016, an employee was involved in a ""High Altitude Low Oxygen"" (HALO) ""free fall"" parachute jump as part of his training curriculum. When the wind shifted at the drop zone, he was dragged into a chain link fence and fractured his right leg/ankle. The employee was admitted to the hospital and will require surgery to repair the fracture to his leg/ankle.",1
An employee was positioning a 4x4 beam on a semi-trailer and pinched his right index finger between the beam and a concrete panel resulting in amputation of the fingertip.,1
"On August 24, 2016, an employee stepped onto a pallet to retrieve a box, lost their balance, and fell to the ground breaking the left hip.",1
An employee was climbing down a Jacob ladder onto a barge and became physically unable to continue.  He fell to the deck and was hospitalized.,1
An employee was changing a silicone drum attached to a pump. A raised piston on the pump fell 6 inches and pinched the employee's thumb between the base of the piston and the plate resulting in the amputation of the side of the employee's thumb.,1
"An employee was guiding the hose and pouring concrete on the jobsite. When there was a build up of air pressure in the machine, the hose started to shake and the metal portion of the hose struck the employee in the head. The employee fell backwards onto a piece of horizontal rebar and fractured five ribs on the right side. The employee also suffered a contusion on the right arm and a minor chemical burn in the eyes from the concrete.",1
"Employee was cutting a base plate with a band saw. As the employee was cleaning off the metal shavings, the band saw caught his glove and amputated the left index finger above the knuckle.",1
An employee received burns to four fingers on the right hand from an arc flash.,1
"An employee was operating a tractor and mowing around the lake. When the tractor came close to sliding into the lake, the employee jumped off of the tractor and struck the front of the tractor with his left foot resulting in lacerations.",1
"An employee was stepping off a ladder, tripped over a copper AC line, and dislocated an ankle.",1
An employee slipped and fell and hit their head resulting in hospitalization for a concussion and head trauma.,1
An employee was troubleshooting a conveyor belt and got a hand caught in the sprocket resulting in the amputation of the left pinky finger.,0
An employee was delivering mail and was bitten by a dog causing the employee to fall and fracture the femur bone.,1
"An employee was standing on a small trailer loading irrigation pipe, slipped and fell to the ground breaking bones in the back.",1
An excavator was lifting a compactor out of an excavation. The cable that was used to lift the compactor slipped and an employee was repositioning the cable when his finger was caught between the cable and the compactor resulting in a fingertip amputation.,0
An employee was cutting a turkey leg using a slicer and amputated the 3rd and 4th fingertips on his right hand.,0
An employee was operating the bagging machine and got the right pinky finger caught when the machine cycled resulting in a partial amputation.,1
An employee was hospitalized with a laceration to the leg after his forklift rolled forward and struck his leg.,1
An employee was attempting to start a loader. The loader rolled and struck the employee. The employee was hospitalized with seven rib fractures and a punctured lung.,1
"An employee was unjamming the Gayler, slipped, and caught his left hand in the blades resulting in amputation of four fingers below the knuckle and the thumb tip.",0
"An employee was entering the building when he lost his balance and fell, breaking his left hip.",1
"On August 24, 2016, a driver who was switching trucks to prepare to haul another load began to feel dizzy. He was admitted to the hospital and treated for severe dehydration.",1
"An employee was mowing a residential property and stopped to adjust the blade on the mower. When he reached under the mowing deck, his left middle finger was lacerated and later amputated.",0
An employee was standing on a folded up step ladder on a scaffold platform. The ladder was leaning against the wall and caused the scaffold to tip over. The employee sustained a head injury that required hospitalization.,1
"While returning to the construction site from lunch, an employee slipped/tripped and fell onto the excavator blade lacerating the employee's right shin. The employee was hospitalized.",1
An employee was attempting to pick up a loose transporter. The employee exited the tug and was in between the tug and the transporter. The tug reversed on its own pinning him between the tug and the transporter and causing a fracture to his left leg.,1
"On or about August 25, 2016, an employee fell approximately 20 feet off of a ladder resulting in broken bones.",1
"An employee was changing out a band saw blade. The employee loosened the wheel for the saw and went to get a forklift to lift and remove the wheel from machine. When he went to put chains on the wheel, the wheel fell and hit the door of the band saw machine causing it to swing open and strike him in the head resulting in a contusion to the forehead.",1
"An employee was changing a wheel on a hand held grinder when it actuated resulting in tissue, muscle, and tendon damage to both of his hands.",1
"On August 25, 2016, an employee suffered a partial amputation of the right pinky finger while using a metal casting machine to form dimples in the castings.",0
An employee was clamping lumber pieces together and pinched his left pinky finger amputating the fingertip.,0
An employee's foot was caught in a pinch point between the shell of the melting furnace and the casting floor mezzanine while attempting to unlatch a hook related to the safety bin chute. Three toes on the employee's left foot were amputated.,0
"An employee was stepping onto the roof, slipped on an air hose, and fell eight feet to the ground fracturing his wrist.",1
An employee was shot in the shoulder by a customer.,1
"An employee was removing a tray that was stuck to the mold in the GN pressure former when the die on the GN pressure former came down on the employee's right thumb, amputating half of the thumb.",1
An employee was seriously injured after being pinned between a shuttle and conveyor belt while attempting to adjust the glass breakout arm. The employee suffered fractured ribs with a possible spine injury.,1
An employee was troubleshooting an injection molding machine and amputated three fingertips on the right hand.,1
"On 8/25/16 at approximately 4:45 PM, an employee reporting to work fell while walking down a ramp in the loading dock area and fractured the left arm.",1
An employee was operating a standing dock forklift and got his foot caught between a pole and the forklift. The employee's left foot was crushed and partially amputated at the hospital.,0
An employee was spreading concrete on the second floor of a construction project from a truck-mounted concrete pump with a 4-section placing boom. The boom fell onto the employee's leg resulting in a broken right ankle and a broken left leg.,1
"On August 25, 2016, an employee unstrapped a concrete form to remove it and as they were lifting it with the crane one of the filler forms fell and struck the employee. The employee was hospitalized with a broken right collar bone, facial abrasions, a head laceration and a contusion on the right shoulder.",1
"An employee was walking into work, tripped on a piece of angle iron, and fell injuring his cheekbone and head.",1
"An employee jumped from a shelf and fell to the floor, injuring his left side.",1
"An employee was reversing the right-angle pneumatic driver equipped with a tapping bit when the driver caught his glove and twisted it around the tapping bit, damaging his left pinky finger. The pinky finger was amputated at the first joint in the emergency room.",0
An employee was attempting to free a jam in an auger and amputated his middle and ring fingers.,1
"An employee was clearing a jam on the vertical bagging machine. When the employee hit the reset button, the bottom metal bar that seals the bag closed amputated the employee's left middle fingertip.",1
An employee was on the street delivering mail when she reported numbness in her hands due to heat-related illness.,1
An employee fell in the parking lot and broke his right hip.,1
An employee was assisting another worker to move a patient from their bed onto a wheel chair and strained her back and twisted her stomach.,1
"An employee was operating a machine that uses air pressure to push small plastic cleaning wads through half-inch diameter pipes to remove debris and oil. A metal rod from the machine broke off and remained in the pipe. When the cleaning plug and air pressure were applied to the pipe during the cleaning process, the pressure built up and eventually shot the metal rod out of the pipe. The metal rod entered the employee's left hand causing internal muscle and tissue damage requiring hospitalization.",1
An employee was lifting a package and suffered a herniated disc in the lower back.,1
An employee was troubleshooting the elevator. The employee was maneuvering the light curtain back into place when their hand was crushed in the elevator resulting in broken fingers and degloving on the right hand.,1
An employee was working near the steel loader rake unit. The unit slipped and rolled over the employee breaking his right foot and three ribs.,1
An employee was delivering mail to a residential home and cut their finger on a mailbox resulting in amputation of the finger.,0
"An employee was in training requalifying for ladders. The employee was climbing an extension ladder, got dizzy due to heat stress, and fell about 15 feet.",1
An employee was outside training on a Meggar and started sweating profusely.  The employee was hospitalized for dehydration.,1
An employee was removing a stuck pouch from a machine and their left hand was caught in the chain and sprocket assembly resulting in amputation of four fingers.,1
An employee operating a milling machine was hospitalized with a broken leg after being struck by the door of the machine.,1
"An employee was replacing glass in a window when he fell from his ladder to the ground, fracturing his ankle.",1
An employee was operating an undercut saw and amputated the right middle fingertip (no bone loss).,0
"An employee was transporting a podium to the field and sustained a head injury. The employee was in the back of a mule-type ATV holding the podium, while another employee, drove the vehicle down to the field. While driving the vehicle down the ramp to the field, the injured employee hit his head on the bridge beam and fell out of the back of the vehicle. The employee was hospitalized for a concussion, cranial bleeding and a spinal fracture.",1
An employee was hospitalized for dehydration after a service call.,1
An employee was bitten by a snake.,1
On 8/26/2016 at 1:45 p.m. an employee was descending an 8 foot ladder when she lost her balance on the 3rd rung from the top and fell to the floor. She suffered compression fractures of the T12 and L3 vertebrae.,1
An employee was cutting steaks while wearing metal cut gloves when the knife went through a hole in her gloves resulting in a left index fingertip amputation without bone loss.,0
An employee was adjusting the feed roller to the spec saw. The employee's watchband was caught in the keyway and the employee's hand was caught between a driveshaft and the feed roller resulting in tendon damage to the left hand and a laceration that required hospitalization.,1
An employee was using a high pressure washer and lacerated his hand between his thumb and index fingers.,1
An employee was troubleshooting the dough pump and amputated the fleshy tip of the right middle finger.,0
An employee was removing trash/debris from a rooftop and fell approximately 25 feet through a hole to the ground below resulting in broken bones.,1
"On or about August 26, 2016, an employee was walking on rebar when the tie wire broke causing the rebar to come up and cause a puncture wound.",1
"An employee, with the assistance of other employees, was unloading a trailer of freight. A 1,300 pound pallet of materials fell on the employee causing a fractured left femur, cracked ribs and a possible right finger amputation.",1
An employee was working with a horizontal lathe machine boring a sprocket when the sprocket flew out and struck the employee on the head.,1
An employee was walking the floor when a fork truck backed up and struck the employee resulting in foot fractures and a sprained knee.,1
An employee tried to close a stuck thermoforming oven door. The tool he used slipped and his hand went into the oven. The door closed and his right hand was severely burned.,1
"On August 26, 2016, an employee sustained a fingertip amputation after contacting a rotating blade on a moulder machine.",0
"A bin wall was set in place by a crane. As the employee was disconnecting the bridles and the crane swung away, the bin wall shifted and pinned the employee crushing his pelvis and fracturing the L2 vertebra.",1
"A crew member became nauseous, was throwing up and had cramping in the hand and wrist. This incident occurred while working on a barge. The barge was not docked at the port.",1
"An employee was coming down from their workstation, missed the last step and fractured their leg.",1
An employee was admitted for dehydration after completing a shift on 8/25/2016.,1
"An employee was hospitalized for heat exhaustion. For approximately one hour, the employee was securing a load of pipe on a flatbed trailer. Standing on the ground, the employee was throwing straps over the load and ratcheting tight.",1
On 8/26/16 an employee was operating a brake press and lost part of his left middle finger.,0
"An employee slipped on a ear of corn, and fell. The employee suffered a punctured lung.",1
An employee was repairing a meter run and began to experience cramping. The employee was hospitalized for heat exhaustion.,1
An employee was operating a motorized pallet jack and fell off fracturing her pelvis.,1
An employee amputated the tip of his finger in a packaging machine.,1
An employee was cleaning the dough dividing machine when it started and amputated two fingertips on the right hand.,0
An employee slipped and fell within her workstation and fractured her knee requiring surgery.,1
"An employee was installing insulation from a scaffold in a kneeling position. An insulation clip fell onto the scaffold planking. Debris became airborne and got into the employee's right eye, lacerating the cornea.",1
"An employee was getting equipment out of the shed located behind the main building. He slipped and fell, fracturing his ankle.",1
An employee was hooking a dolly onto a crane. The dolly rolled and pinned the employee between the dolly and crane fracturing the employee's pelvis.,1
An employee was working on a conveyor and got their right hand caught in the chain and sprocket resulting in amputation of the little finger at the first joint.,0
A crane operator and another employee were lifting two steel beams. The crane operator did not notice that the other employee had his hand between the beams. When he began lifting the beams the other employee's hand became caught between the beams resulting in amputation of the right middle fingertip.,0
"An employee was hospitalized for heat related illness during the shift on Friday, August 26, 2016.",1
"On August 26, 2016, at approximately 10:30 AM an employee was cutting a barrel. The barrel exploded and the employee suffered several burns and broke his left leg.",1
"An employee fell through a roof and was hospitalized with a concussion, a broken right elbow and cuts and scrapes.",1
An employee's small finger was amputated when pinched between a part and the punch press machine frame while the employee was catching parts coming off the machine.,0
An employee was starting up a bagging machine and suffered a fingertip amputation.,0
"An employee was exiting the belt loader. His foot slipped and he fell, suffering broken ribs and a possible lacerated lung.",1
An employee fell and broke an ankle.,1
An employee amputated the left middle fingertip on a conveyor machine.,1
"On August 26, 2016, an employee sustained a fingertip amputation while cutting paper off of a bag folding machine.",0
An employee was checking bolts on a truck mounted rolling concrete mixer. The employee reached for a wrench that was stuck on the mixer and pinched the right index finger between the wrench and truck mounted pedestal. The initial injury was a severe laceration that later became a surgical amputation.,0
An employee was on a walkie rider and approaching another walkie rider. The employee stepped off before the unit came to a complete stop and a foot was caught between the two units resulting in a broken ankle.,1
The employee was bending over to remove a bad printed copy. Their left hand was on the stacker/bundler when the plunger engaged and amputated the left index finger.,0
An employee was walking and tripped and fell forward breaking his pelvis.,1
"The injured employee was checking rack numbers inside a semi trailer. A forklift operator was unaware of the employee inside the trailer and entered the trailer with an additional load of racks striking the employee with the load, fracturing the employee's ribs.",1
An employee received an electrical shock and third degree burns while removing and replacing a pad transformer.,1
An employee was unhooking an RV. The RV rolled back and ran over the employee.,1
An employee was photographing a dock leveler that was in the up and open position. The dock leveler closed with significant force and struck the employee's left foot breaking all five toes.,1
An employee was working at a well site and at the end of the day felt ill. The employee was admitted for heat exhaustion.,1
"An employee was testing a slide ride at startup. The water was turned onto the slide, but had not yet filled the bottom pool when the employee tested it. The employee slid down the slide and, once at the bottom, slid across the shallow pool (1/4"" of water) and into the end of the slide wall.  The employee fractured her right tibia and suffered ligament damage to both ankles.  The employee was hospitalized.",1
The injured employee was installing line skirting. He placed his left hand in the hinge side of a watertight door when another employee inside the tug shut the door amputating approximately one inch of the employee's left middle finger.,1
A temporary employee was cutting molding on a miter saw. The saw blade hit a knot and caused the wood molding to kick back. The employee's hand was pulled into the saw blade and her right index finger was amputated.,0
"A employee's left ring finger was amputated when the employee and another employee were moving a wheeled cart with two I beams on it. The cart ran over a bump, the I beams shifted, and the employee's left ring finger was crushed between the two beams.",0
An employee was hosing down dust at a demolition site and was struck by a piece of concrete resulting in a broken bone in the face and arm.,1
An employee was threading plastic through a winder machine and amputated the middle and ring fingers on the left hand.,1
"An employee was lifting a box, slipped and fell breaking her leg.",1
An employee tripped over her own feet and fell while exiting the building injuring a hip.,1
"On August 28, 2016, an employee was clearing a ""hot drop"" at a press and was sprayed with hot plastic. The employee was hospitalized with second degree burn injuries to the face and right ear.",1
An employee was hospitalized for heat exhaustion after cleaning his tote area on the belt system.,1
"An employee was operating the circulating pump. Hydrocarbons from the open tank on location ignited and the employee received burns to the face, ears and hands.",1
An employee was gauging a crude oil tank through a thief hatch and may have been exposed to vapors from the tank or oxygen depletion. The employee became ill and fell down the stairs breaking the right wrist.,1
"An employee was collecting shopping carts in the company's parking lot. While crossing the street to retrieve a cart, the employee was struck by a vehicle and suffered a right leg fracture, torn ACL, broken teeth and three fractured vertebrae.",1
An employee was cleaning a dough press machine while it was running. The machine caught the rag in the employee's hand and pulled her index finger into the blades. The index finger was amputated from the first knuckle.,0
"On August 29, 2016, an employee suffered a partial amputation of the left middle finger while trying to open a gate.",1
An employee was retrieving stock from the top shelf using a ladder. The employee fell and sustained neck and back injuries.,1
An employee was working in a crawl space above the ceiling cleaning out debris during roof repairs. The employee fell 18 feet through a hatch door to the concrete ground below breaking both ankles and sustaining a head laceration.,1
"On August 29, 2016, at 1:30 p.m. an employee was working with two other employees testing a salter machine that is a component of a newly manufactured popcorn machine. Salt was added to the salter machine and the machine was running to produce salted popcorn. At some point, salt accumulated in the machine. The injured employee visually detected the salt accumulation and attempted to clear the salt by hand. Subsequently, his right hand was caught between the rotating horizontal screw auger and adjacent panel of the machine resulting in bruising and tendon injuries requiring overnight hospitalization.",1
"On 8/29/16 at 1:35 p.m. an employee was using a folding table to bend steel. When he pressed the foot operator his hands were crushed inside the machine. After evaluation and surgery to repair the injury, the employee lost three fingers.",1
An employee exiting a crane was walking on the tracks and slipped and fell two feet off the tracks breaking the right leg.,1
"An employee was moving a piece of sheet metal when the tip of the left pinky finger got caught between the sharp edge of the sheet metal and a flat piece of metal amputating approximately 1/4"" of flesh from the fingertip.",1
An employee was removing a bolt from the die and caught their left index finger in between the die and the bolt resulting in amputation of the finger.,0
An employee was lowering an aircraft door and caught a finger in the track amputating one half of his left index finger.,0
"The employee was reaching into a tool box and slipped and fell to the ground. During the fall, the employee grabbed the tool chain which caused the tool box lid to slam against his fingers resulting in a partial amputation of a finger.",0
An employee operating a stand-up forklift was struck by (broad side) another stand-up forklift at an aisle intersection. The collision pushed the forklift into a concrete barrier. The employee operating this forklift had his foot and ankle crushed between the forklift frame and the concrete barrier. The employee was transported to the hospital and hospitalized for surgery to the ankle and foot. The second forklift operator was not hurt.,1
An employee suffered a heat related illness while working at or near a furnace.,1
An employee was replacing a press pump motor. The employee stepped over the motor and his boot got caught on a hydraulic hose. He tripped and fell and his left hand struck the expanded metal guard for the press next to where he was working severing his left pinky finger.,1
An employee fell off her bicycle while commuting to work on shipyard property. The employee fractured the left wrist and was hospitalized for surgery.,1
"The metal shelf inside a wheeled container of mail was loose and fell on an employee's finger while the container was being pulled, causing a serious laceration. The finger may have to be surgically amputated.",0
A steel frame fell over onto an employee's right foot crushing toes. The toes were later amputated.,1
An employee had three fingertips amputated in the connecting eyes of the bucket and the tractor.,1
An employee was troubleshooting the packaging line on Boxer #1.  The machine cycled and the employee was struck in the head by the packaging line.  The employee was admitted to the hospital for a head injury and cuts.,1
An employee was on a step ladder trimming an apple tree and fell breaking a hip and their nose.,1
An employee was lifting four fiberglass gates and felt back and chest pain. The employee was hospitalized for a muscular strain.,1
An employee slipped and fell from a ladder striking his head on the floor. The employee was hospitalized.,1
"An employee was walking up a concrete ramp towards a dumpster, when she slipped and fell. The ramp had a cleaning agent on it that caused a chemical burn to her lower extremities.",1
An employee slipped and fell 2.5 feet off the semi-truck. The employee was hospitalized for broken ribs and a punctured lung.,1
"While unlashing a container aboard the deck of a coastal vessel, the employee passed out due to possible heat stress and fell backwards striking the deck with his face and causing a laceration to his right cheek.",1
"An employee was tightening packing on a load pump with the truck pump drive shaft engaged. The employee's clothing became entangled in the drive shaft and pulled the employee's arms in resulting in multiple fractures to the left arm, skin abrasions on the left hand, and bruising to the right arm.",1
An employee was exiting his truck and lost his balance falling to the ground. The employee broke their right leg.,1
An employee was ripping a board using a circular saw and amputated part of his left thumb.,0
An employee was installing attic insulation and fell from a ceiling joist that was not properly nailed in place. The employee fractured their wrist.,1
"The employee had climbed a fixed ladder to a platform in order to clear a jam on a conveyor. While climbing down from the platform, the employee lost their grip and fell off the ladder to the concrete floor.",1
An employee had his hand on a screen printer while another employee was performing a calibration. The machine went to park and caught the employee's left thumb. The left thumb was amputated from the nail forward.,0
An employee sustained a foot injury while operating a stand-up reach tractor.,1
An employee suffered a fractured ankle when a roll of plastic rolled off a pallet and struck the employee's right ankle.,1
An employee was organizing round metal stock on a table in the saw area. The stock rolled and the employee's right ring finger was caught between the stock and the metal table. The fingertip was crushed and later amputated.,0
An employee was pushing a pallet into a pallet dismantling machine. The blade caught the pallet and pushed it back into the employee's left side causing internal injuries.,1
An employee was driving an ATV down a dirt road and it rolled. The employee sustained a broken hip.,1
An employee raised the bed of a truck and contacted a power line. The employee received second and third degree burns on his hands and back.,1
An employee was using an industrial blender to screen beads. The employee reached into the bottom of the blender and contacted the rotating blades resulting in a laceration to the middle finger and an amputation of the index finger at the middle joint.,0
"An employee suffered first and second degree burns to his face, chest, right shoulder, arm and hand when he was sprayed with hot power steering fluid from the concrete truck.",1
An employee was removing light fixtures and fell off a ladder injuring vertebrae and fracturing fingers.,1
"While climbing out of the tanker truck, an employee missed a step and fell to the ground fracturing their femur.",1
An employee was using a skid steer with an auger attachment to drill holes in the ground. The auger came off the skid steer and the employee jumped out of the way into a 4-foot deep trench. The auger fell on top of the employee causing bruises.,1
An employee was cleaning the bagging machine with a brush. The guard was removed and the employee's right arm was caught in the chain and sprocket resulting in a laceration to the right forearm.,1
"On 8/30/16, an employee was delivering product to the store and suffered serious injury to his left thumb when backing up a powered pallet jack into the freezer and striking his thumb on the locking mechanism on the door.",1
An employee was inserting a card into the blister pack machine when their hand was caught inside of the machine resulting in burns from the heating element (more than 400 degrees).,1
An employee was feeding banding material into the baler and pinched a finger between the baler and the chain amputating the fingertip.,1
"The employee was cleaning the floor in the production area. A powered ""flying"" bucket on a rail system was transporting concrete product and struck the employee as it passed by causing bruising to the lower leg. The employee was hospitalized.",1
An employee was cutting pipe duct material with a knife and suffered cuts to the arm.,1
An employee was removing a chemical mixture from a cooler. A chemical reaction occurred and the employee was sprayed in the face with nitric acid.,1
An employee was tipping over a fiberglass tank with a co-worker and suffered a hernia. The employee was hospitalized.,1
An employee was walking down the stairs and tripped and fell breaking a leg. The employee was hospitalized.,1
"An employee was pulling the release rope on a self dumping hopper. As the hopper was dumping, the hopper slid forward and the safety chain separated causing the hopper to fall off the forks of the lift truck. The employee still grasped the release rope and as the hopper fell his left ring finger was amputated between the fingernail and the first knuckle.",0
"On or about August 31, 2016, an employee was disconnecting drill pipe joints in the rig and slipped and fell. The drill pipe joint came down and struck his right hand middle and index fingers.",1
An employee was feeding lumber into the saw and amputated the left ring fingertip.,0
An employee was tied off on a beam while working inside a hoist way. The employee lost their balance and fell into an exposed drywall stud causing a laceration on the elbow/forearm requiring surgery.,1
An employee slipped on a piece of glass and fell while using stilts fracturing the right patella.,1
An employee was washing out a concrete bucket beside the guardrail of a bridge when a concrete delivery truck struck and pinned him between the left front side of the concrete delivery truck and the bridge guardrail. The employee sustained an injury to his right leg and was hospitalized.,1
Two employees were moving a piece of angle iron approximately 19 feet long. The injured employee picked up one end of the angle iron and the other employee pushed the opposite end causing the injured employee to drop the angle iron. His left middle finger was pinched between the angle iron and a joiner bulkhead coaming on the deck resulting in a fingertip amputation.,0
An employee was walking up the concrete ramp towards a dumpster and slipped and fell into a cleaning agent that was on the ground. The employee suffered chemical burns to her lower extremities.,1
An employee fell approximately 25 feet through a hatch to the bottom deck and landed on some filing cabinets. The employee suffered a fractured jaw and lacerations to the left side of the face.,1
"An employee was driving a skid steer loader with chunks of blacktop in the bucket. The bucket was raised and the employee dumped the load into the dump truck. A large piece of blacktop was hanging over the edge of the dump truck and a piece broke off and fell, striking the employee's right knee and fracturing the knee cap.",1
An employee was hospitalized due to carbon monoxide exposure.,1
An employee was sanding the top of the wing of a C-130. Another employee noticed his eyes rolled back as he appeared to lose consciousness. The employee fell approximately 2 feet from the top of the wing to the wing stand resulting in injuries to the employee's face and throat that required surgery.,1
"An employee was delivering mail in a residential area, slipped in a mud puddle, and fell breaking her left leg.",1
An employee was operating a hoist and while trying to unhook the basket the employee's right middle finger was caught by the hook and the fingertip was amputated.,0
An employee was straightening lumber on the landing table to the trimmer when a board or a cant caught his left middle finger between another board amputating it at the middle knuckle.,0
"On August 30, 2016, around 11:30 a.m., an employee went up in an articulating lift to conduct painting activities on a building. He contacted power lines and fell into the basket. The employee was hospitalized for burns on his right arm between his elbow and shoulder.",1
An employee was helping to remove a door when the door fell onto the employee injuring their neck.,1
"The employee was operating a grommet machine placing the bottom and top grommet on the canvas materials when she noticed the top grommet was not straight. She tried to straighten it and the hammer came down on her right middle finger, crushing the fingertip.",1
An employee performing maintenance on a press received an electrical shock that resulted in hospitalization.,1
An employee was discussing a stressful situation with a supervisor and began to feel ill. The employee was hospitalized.,1
An employee was climbing a ladder to the roof to remove materials and fell 12 feet resulting in a broken right ankle and leg.,1
An employee fell down the steps.,1
An employee slipped while retrieving a part that had fallen off a suspended conveyor in the parts washing area. The employee's right foot was submerged into a phosphoric acid cleaning solution resulting in burns to his right ankle and 1/2 way up his calf.,1
"An employee was leveling the railcar prior to setting, positioning, and tack welding the roof onto the railcar when he injured his left thumb that required surgical repair. The injury resulted in a partial fingertip amputation with exposed tip of the distal phalanx.",1
"On or about August 30, 2016, an employee was troubleshooting an issue on a washer when their left hand was caught by the belt and flywheel resulting in an amputation injury.",0
An employee was performing roofing work when his aluminum ladder came in contact with overhead power lines. The employee was shocked.,1
An employee cut their hand with a knife.,1
An employee was pushing a laundry cart up the ramp. The cart slipped down the ramp and struck the employee's leg resulting in a leg fracture.,1
An employee was changing the battery on a forklift. The battery shifted and smashed the employee's left middle finger resulting in amputation of the fingertip.,0
"An employee was hooking up a trailer with a port-a-potty on it to a truck hitch. As the employee manually lifted the trailer bed to hook it to the truck hitch, the employee dropped the bed and pinched his middle finger on the block resulting in a fingertip amputation.",1
An employee was operating a chop saw and amputated one or more fingers on the left hand.,0
An employee was unjamming a board on the planer mill. A 14' poplar board came off the planer mill belt and pinned the employee's left hand between the board and the barrier guard causing an amputation of the left index and middle fingertips.,0
The employee was working at an elevation on racks and slipped through the fall protection he was wearing after losing his balance. The employee fell 10 feet and suffered a broken left arm and fractured hip.,1
An employee was hospitalized after a fall from a ladder.,1
An employee was struck by a passing forklift and suffered a left leg injury.,1
"As the employee was straightening a rebar to lay a block, the rebar snapped. The employee fell 14 feet over a parapet breaking the right knee and pelvis.",1
An employee was hospitalized after his finger became entangled in a lathe machine.,1
An employee was disassembling a metal workstation and caught a finger between metal bars resulting in a fractured and lacerated left index finger.,1
An employee was carrying a box of materials to their car and fell down the steps in parking area of the facility. The employee suffered a broken rib and punctured lung requiring hospitalization.,1
An employee was handling mice and suffered an allergic reaction upon indirect contact with the mice.,1
"An employee was working on a flat roof rolling out the rubber roofing and fell off the edge of the roof to the ground approximately 24-26 feet below. The employee suffered a fractured skull, shoulder and wrist.",1
An employee cut their left palm with a kitchen knife.,1
An employee fell from a sawhorse while working at a height of two feet. The employee suffered a broken tailbone and fractured vertebrae.,1
An employee's finger was between two steel containers. When a forklift struck the steel container the employee's finger was crushed between the two containers and amputated at the hospital.,0
"On or about August 31, 2016, an employee working in KC-3 maneuvered a floor tile. The floor tile slipped and contacted the employees fingertip between the edge of the tile and the floor opening. The employee suffered a partial amputation of the right middle finger.",0
"An employee was driving a forklift out of the back of a truck when the truck started to roll. The employee jumped from the truck and fractured his foot and degloved the left big toe. Later, two toes were amputated.",0
An employee was opening boxes with a box cutter and lacerated their left thumb.,0
An employee was kneeling over and cleaning floor mats when another employee backed a vehicle from a service bay and struck the employee's leg fracturing it.,1
An employee was cleaning the proximity switch on the palletizer machine and amputated two fingers at the second knuckle.,1
Two employees were trying to subdue a patient who became unruly and was attempting to fight with another patient. The patient fought back and knocked the employee into a wall causing a pectoral muscle injury. The employee was hospitalized.,1
An employee was backing up and got caught between the stock picker and a rack suffering broken ribs and a collapsed lung.,1
An employee's left arm was caught in the shaft of a conveyor belt and fractured while cleaning floors.,1
An employee was folding a wheelchair pedal upward and when the employee stood up the employee experienced acute pain in their lower back and down the right leg.,1
An employee suffered an electrical shock from a transformer test unit.,1
"An employee was preparing to connect the vehicles together and attempted to lift the converter dolly. Once it began to roll, the converter dolly rolled over the employee's foot causing multiple broken bones in the foot area.  The employee was admitted to the hospital for surgery.",1
An employee was using a wrench to install a belt on the vent fan unit and amputated the ring finger in the belt and pulley.,0
"On August 31, 2016, an employee was reaching for parts that had accumulated on a chain conveyor when their glove was pulled into a chain and sprocket resulting in a partial amputation of the right pinky finger.",0
An employee fell from a ladder and hurt his back.,1
An employee was operating the production line (slitter) and attempted to remove a piece of scrap while the line was operating. A production line pivot arm came down and struck the employee's right arm fracturing it.,1
An employee was performing maintenance on pot one of a pump. The plunger from the pot moved and injured the employee's fingers on his left hand.,1
"On August 31, 2016, at approximately 9:55am, an employee was injured after falling from a 6 foot fiberglass step ladder.  Using a sawzall, the employee was cutting a 2 inch pipe, approximately 4-5 feet long, from a wall.  While standing on the second rung from the bottom of the ladder, the pipe broke off and struck the employee across the back knocking him to the concrete floor below.  The employee was hospitalized for a head injury, a fractured right eye socket, and two broken ribs.",1
"While an employee was knocking cows, a captive bolt stunner that the employee was using struck the metal lift equipment. The captive bolt stunner recoiled striking the employee on the side of his face resulting in a zygomaticomaxillary complex fracture and facial trauma.",1
An employee fell off the back of a stake body truck striking the ground and suffering a broken collarbone and ribs.,1
"On or about 8/31/16, a temporary employee suffered shortness of breath and headaches and was admitted to a hospital due to an over exposure to isopropyl alcohol during final product cleaning operations.",1
An employee was operating the chop saw. Another employee was operating a PIV and struck a metal cart that was holding wood and the cart then struck the employee operating the chop saw in the lower leg causing lacerations.,1
"An employee was assisting two other employee to remove a cylinder from a log loader. The employee was using a pry bar to assist the other employees that were trying to remove a pin. Once the pin was removed, the cylinder slipped forward in the mud causing the pry bar to jerk backwards and strike the employee in the head just below his hard hat knocking him unconscious. The employee suffered from a concussion and a small brain bleed. He was hospitalized.",1
An employee suffered a fingertip amputation.,0
An employee was operating the manual press. She was changing parts in the machine and activated the foot pedal crushing her right hand in the machine.,1
An employee was moving an overhead crane while walking with its pendent control.  The crane's slings with the plate-dog attached were behind the employee as he walked.  The plate-dog got caught on a empty steel work skid used to support the materials being fabricated and pulled it over landing on the employee's left ankle. The employee suffered a compound dislocation of the left ankle requiring surgery.,1
An employee was walking backwards while operating an overhead crane and struck his left leg on a steel truss. The employee suffered a left knee injury requiring surgery.,1
"On 08/31/16, an employee picked up a case of beef weighing between 50-70 pounds and suffered a hernia that required surgery.",1
An employee was climbing an egress ladder and fell.,1
An employee tripped up the stairs from the basement and fractured his right elbow.,1
An employee had his feet up on a brace.  The brace failed and the employee fell to the ground fracturing an arm and vertebrae.,1
An employee's right thumb was amputated in a punch press when the machine was inadvertently activated.,1
The employee was on the top rung of an 8-foot step ladder counting end of the month inventory and fell. The employee struck his right arm and hand during the fall and suffered an orbital fracture and concussion upon impact with the concrete floor.,1
"An employee had just completed airing up a tire and walked over to the tool table to retrieve the valve stem cap. When the employee returned to the tire and was screwing the valve stem cap on, the tire suddenly depressurized causing the tire and rim to strike the employee. The employee suffered multiple fractures to the face, chest and ribs, a head laceration and a broken elbow.",1
An employee was performing home inspections and was hospitalized for heat exhaustion.,1
An employee was manually pushing into place a rigged bundle of round bar stock onto a storage shelf. The steel rolls shifted and a round bar weighing approximately 120 pounds rolled onto his left middle finger resulting in an amputation at the first knuckle.,0
An employee was hospitalized for heat-related illness.,1
An employee was working and began cramping and not feeling well. The employee was hospitalized for dehydration.,1
An employee was preparing the workplace for underground electrical work and suffered a heat-related illness.,1
An employee fell down stairs and suffered a broken clavicle and a concussion.,1
An employee was stung by a bee while delivering packages and had a severe allergic reaction resulting in overnight hospitalization.,1
"An employee was connecting natural gas service to a ground-mounted HVAC unit and stepped backwards into a wash-out ditch, breaking a leg.",1
An employee amputated the left middle and ring fingers while running metal through the flat press.,0
An employee passed out due to dehydration while shuttling newly manufactured automobiles to the PIO area for finishing in high temperatures.,1
An employee was hospitalized after suffering a bee/wasp sting while conducting a maintenance walk around. The sting on the left arm developed into acute compartment syndrome.,1
An employee and a crane operator were preparing to lift a cutter head (tool) into a transport rack. The crane operator picked up the tool and the employee's finger was caught in a pinch point between the tool and the transport rack resulting in the amputation of the right index fingertip.,0
"An employee was walking to her car in the parking lot, tripped on a drainage bib in the parking lot, and fell fracturing the right shoulder. She was hospitalized.",1
An employee was unloading a load on the bed of a trailer. The employee loosened the steel load binder which sprung loose and struck the employee. The employee's tibia and fibula were fractured.,1
An employee fell off the back of a delivery truck and broke his hip.,1
An employee was hanging drywall when planking from the scaffold attached to the wall gave way. The employee fell approximately 10 feet and broke both legs.,1
An employee was working as a panel saw helper and lacerated the left middle fingertip. The distal phalanx was later amputated.,0
Two employees were inside a vehicle removing the dash console. The car shifted into drive and struck another employee that was sweeping inside the shop and pinned him to the wall. The employee suffered a fractured pelvis.,1
An employee was cleaning PVC purge from the barrel of an extruder and amputated a half inch of his left index finger.,0
An employee was using a hammer and struck his left thumb on 09/01/2016.,1
An employee was exiting the bus when he fell backwards striking his hand on and breaking the fan guard. The fan blade cut his finger resulting in a partial amputation of the right pinky finger distal phalanx.,0
"An employee was struck by a pressurized 4-inch hose when it was disconnected from his truck. The employee suffered broken ribs, a collapsed lung and a right arm laceration.",1
An employee was on a ladder getting a counter stool down from the storage room. While stepping down from the ladder she missed the last step and struck her foot hard on the floor resulting in a broken right foot.,1
An employee was walking and fell breaking a rib and puncturing a lung.,1
An employee's leg was caught in a sweep auger while cleaning out a grain bin.,1
An employee was using a drill press to drill holes into a part. The employee was wearing gloves and the left glove got caught on the drill bit. The rotating drill bit pulled the employee's fingers into the drill causing an amputation of the left ring fingertip.,0
"An employee was riding a bicycle at the jobsite, swerved to avoid striking another employee and hit a containment wall. The employee fell from the bicycle and fractured the left hip.",1
An employee suffered the amputation of the right ring and pinky fingertips while moving furniture when the couch fell onto his hand on 09/01/2016 at 11:00 a.m.,0
An employee was walking across the barge deck when a rigging spreader bar fell over onto the employee's foot and broke bones in the foot.,1
An employee was inserting wires through electrical conduit and fell from an A-frame ladder. The employee fractured his skull and two ribs and suffered four compressed discs.,1
"An employee was restocking shelves. As the employee turned, a knee gave out, and the employee fell fracturing the left hip and shoulder.",1
An employee was sizing a T in a die using a hydraulic press. His hand slipped and the die closed on his left pinky finger.,1
An employee suffered dehydration while working on a roof installing insulation.,1
"Employees were starting and moving a vehicle. When the car started in reverse, an employee's foot was run over resulting in a broken ankle.",1
An employee was driving cattle in a ring and was trampled by a cow. The employee suffered broken ribs and a broken hip and pelvis on the right side of his body.,1
An employee was walking next to the location where a carbon anode got stuck on the end of a conveyor. The anode dislodged and fell onto the passing employee's right foot fracturing it.,1
An employee was walking in the yard when another employee driving a tractor trailer backed up over his foot fracturing it.,1
An employee was performing maintenance on the volley elevator when a blade from the elevator caught his left arm and lacerated the forearm.,1
"An employee was changing out a part on a forklift mast. When a coworker pushed the shift lever, the mast shifted over two fingers on his left hand, jamming them against the mast resulting in amputation.",1
An employee tripped over a wooden pallet and fractured the right leg and/or knee.,1
"An temporary employee was working on a roofing job, slipped on the wet metal roof, and fell 26 feet to the ground.  The employee suffered a broken hip and fractured vertebrae (L1 and L2) and was hospitalized.",1
An employee was attempting to pull fuses from an energized electrical panel when an arc flash occurred and burned the employee's left arm and hand.,1
"An employee was performing maintenance on an air handler unit.  The equipment was shut down, but the belt was still moving.  The employee shined a flashlight on the belt to inspect it and the flashlight contacted the belt, causing her glove to be pulled into the moving belt.  She sustained a partial amputation to her right ring finger.",0
An employee was operating a die forming machine and injured his hand when the machine malfunctioned.,1
An employee was moving a molding machine with a forklift. The machine slipped off the forks and landed on the employee crushing the lower extremities.,1
"An employee hooking up the fermenter was sprayed with hot sodium hydroxide when the hose was disconnected. The employee suffered second degree burns to the top of the feet and first degree burns to the right shin, arm and thumb.",1
Employees were working on a 3 phase power line and the employee made contact with an energized powerline resulting in third degree burns to the right shoulder.,1
An employee was unloading product from the truck and slipped off the ramp. The employee was hospitalized for a fractured right arm and a head laceration. The employee was also knocked unconscious for a brief period of time.,1
An employee was off loading liquid carbon dioxide from a truck to the tank when the pressurized hose disconnected and struck the employee in the face fracturing the jaw.,1
"An employee pulled the west end of the rails apart to apply the hoist straps. As the employee proceeded to the east end of the side rails to pull the unit apart, a coworker pulled the east end. The west end side rails then fell onto the employee's right foot.",1
The employee was tramming a sonic grip (drilling). He was operating the drill from an enclosed cab.  A radiator from an engine next to the cab failed and blew out hot radiator fluid.  The fluid came through the open cab open window causing second degree burns to the employee's face and head.,1
"An employee was pushing a rolling gate closed while his right hand was on top of the gate. His right index finger was caught under the roller, breaking the finger and cutting it down to the bone.",1
An employee felt dizzy and fell approximately 10 feet from a ladder fracturing a leg.,1
An employee was helping a delivery driver move the dock plate by hand. The driver let go of the dock plate and it fell onto the employee's hand and amputated a finger.,0
An employee was installing a frame on a chiller. The employee was positioning two pieces of angle iron to line up the bolt holes when a piece slipped and caught his finger. The left index fingertip was amputated.,0
A temporary employee was operating a powered pallet jack and caught his left foot between the powered pallet jack and a pole resulting in a compound fracture.,1
An employee was transferring beads from a larger hopper that was being held in place by a forklift to a smaller one. The employee fell off the hopper and fractured his leg in multiple places resulting in hospitalization.,1
The employee had gone into the cement booth to clean the roller. He closed the safety gate and attempted to jog the roller. The employee had his hand on the roller and his left arm was caught in the roller and crushed.,1
An employee fell from a rolling scaffold.,1
"An employee tripped over the hitch of a stationary robot while walking across the floor to set up the equipment, requiring hospitalization for a fractured left kneecap.",1
"An employee was on a ladder rewiring an electrical ballast in the ceiling when he received an electrical shock and fell 15 feet, hitting his head on the surface below.",1
"An employee was walking up the stairs when his left leg fell between the steps, fracturing his left ankle.",1
An employee was repairing the tufting machine and straightening up the yarn on a puller roller when his right ring finger was caught and amputated in the machine.,1
An employee became overheated and suffered heat stress/dehydration while using power shears.,1
"An employee fell from the back of a cargo truck and struck her head on the ground below, suffering a head contusion.",1
"An employee was driving an ambulance when a radiator hose broke, spraying antifreeze into the cab and causing the employee to suffer an asthma attack.",1
"An employee climbed through a window to access a locked room. He fell onto a wire cart, fracturing two right-side ribs and suffering internal bleeding.",1
"While cleaning, an employee fell approximately 9 feet through a skylight and broke bones in his back.",1
"An employee was working on a mast climber work platform cord when the machine turned on and the railing pulled in his hand, crushing his right forearm.",1
Two employees were troubleshooting a pump and attempting to start it when an arc flash occurred. One of the employees was hospitalized for a second-degree flash burn to the left hand.,1
An employee suffered the amputation of his right thumb fingertip while verifying the gap of a compressed air valve (80 psi).,0
"An employee was putting in a safety fence using a forklift truck. He was holding the fence in place when it fell and hit his arm, fracturing his right forearm and tearing a muscle.",1
"An employee was trying to open a door to the work area while a coworker was on the other side of the door washing their hands in the sink. The door was blocked causing it to slam on the injured employee's finger, amputating it halfway up the right middle fingernail.",0
An employee was helping to clean up a spill when he slipped and fell at the produce department and fractured his right hip.,1
An employee was attempting to release tension from a 2-inch ratchet strap by lifting the lever that activates the lock/unlock mechanism. The pressurized strap released and the locking mechanism amputated his right thumb tip.,1
An employee was positioning the bucket on an aerial lift when his fingertip was caught between the bucket and a ceramic insulator that was hanging from the pole. He suffered a partial fingertip amputation of the left middle finger (distal phalanx).,0
"While operating a pallet jack to collect freight, an employee lost control and was thrown from the equipment. The employee was caught between the pallet jack and a rack's cross beam, breaking ribs on the left side.",1
"An employee was cleaning a bread dough machine when the blades amputated the employee's index, middle, and ring fingertips.",0
An employee was delivering a package to a customer when the package leaked liquid bath/body product on the employee. The employee suffered an allergic reaction and breathing difficulty.,1
"On September 5, 2016, an employee was cleaning a conveyor belt when the employee's cleaning rag fell in the machine. While attempting to retrieve the rag, the employee's fingertip was caught and amputated in the conveyor belt rollers.",0
"An employee was lifting a patient from the surgical table to a nearby gurney when he felt a pop and pain in his elbow, requiring hospitalization.",1
"While working outside on a truck's waste collection route, an employee experienced difficulty breathing due to heat stress, requiring hospitalization.",1
An employee was installing a metal roof and handing sheet metal to his coworkers above when the sheet metal slid off the roof and cut him from his elbow to his shoulder.,1
An employee was cutting metal material with a cutting wheel when the material jumped and the employee's left thumb was partially amputated. The cutting wheel was unguarded at the time.,1
An employee was opening doors to a recycling shed so that a garbage truck could be loaded. The garbage truck rolled back and pinned the employee between the back of the truck and the recycling bin/shed. The employee suffered a stomach/abdominal aortic tear.,1
"An employee was operating a machine when his glove was caught between a roller and a belt, dislocating his right arm.",1
"An employee was stocking store shelves when the product dropped on her foot, breaking four of her toes.",1
"An employee was performing servicing operations at a well site when he experienced lower back pain due to water intoxication and dehydration, requiring hospitalization.",1
"An employee was pushing a pallet jack onto a trailer when the wooden floor plank of the trailer broke. The employee then lost his balance and fell backwards, hitting his head on the floor and suffering a concussion.",1
"An employee was using a torque head to set the pressure in a hydraulic hose to 1,725 psi when the hose formed a pinhole and injected hydraulic oil into the employee's right index finger.",1
"An employee used a step cart to get a box of gallon jugs from the top shelf for a customer. She lost her balance and came down awkwardly, fracturing her right leg and requiring surgery.",1
"An employee was manually assembling a steel-framed structure that would eventually be used as a mock-up for training riggers when his left middle finger was caught between a steel I-beam and a metal plate, severing the top half-inch of the finger.",0
An employee injured the middle finger on the left hand while pulling out tent stakes.,1
"An employee used a cleaning rod to clear ground beef out of a running grinder. The grinder grabbed the cleaning rod and pinned the employee's thumb to the machinery, amputating the tip.",1
An employee was using an overhead crane and hydraulic jacks to separate tooling  when the hydraulic jack spacers dislocated and lacerated his left-hand middle finger. He was hospitalized.,1
"An employee leaned against the left upright batwing of a Rhino mower that came unhooked and fell onto the employee. The employee suffered four broken ribs and three fractured vertebrae (L2, L3, L4).",1
"While working from an extension ladder at a height between 12 and 14 feet, an employee fell and sustained multiple injuries. The employee was hospitalized.",1
"An employee was pulling a four-wheel dolly when she slipped, fell, and broke her hip.",1
While transferring methanol from a storage tank into a tote an employee inhaled vapors from the product.,1
"On September 6, 2016, an employee moving an irrigation pivot with a boom truck was struck in the head by the overhaul ball when the cable moving the load snapped. The employee was hospitalized.",1
"On September 6, 2016, at approximately 3:45 PM, an employee was delivering a package to the front door of a residence when she fell due to a separation in the homeowner's sidewalk. She suffered a simple fracture of her right hip and was hospitalized overnight.",1
An employee experienced difficulty breathing while working outside as a helper on a disposal truck. The employee was hospitalized for heat stress.,1
"A 14-foot deep trench caved in while an employee was operating a track hoe nearby causing the track hoe to tilt. When he attempted to exit the machine, his foot was caught between the door and the ground, fracturing his left ankle.",1
"An employee was picking up a box that was on a shelf when he tripped on a plastic strap from a box on the bottom shelf and he fell, breaking his left ankle.",1
"On 09/06/2016, an employee fell in the lobby and then later fell again in the parking lot. Her left leg was injured and required hospitalization.",1
"At about 4:30 PM on 09/06/2016, an employee operating an overhead gantry crane was using a handheld remote and a C-hook to remove a specific coil of slit steel from among other coils in storage. He became caught between the loaded C-hook and another fixed coil in storage, fracturing his left clavicle (collarbone) and two ribs.",1
An employee was ascending a fixed ladder to maintain equipment when he fell and suffered leg and ankle injuries. He was hospitalized.,1
An employee was bitten on the left forearm by a giant mother panda while swapping twin baby pandas. The employee had surgery for nerve and artery damage.,1
"On September 06, 2016, at approximately 5:10 AM, an employee was welding a window on a pipe of a boiler header when hot water and steam suddenly came out from an open pipe that was next to the other pipe, burning the employee's legs, torso, and arms. He was hospitalized.",1
An employee's hand was in the cutting area of a cutter machine when a coworker activated the equipment. The cutter cycled and partially amputated the employee's left index fingertip.,0
"On 09/06/2016, at approximately 5:20 PM, an employee was injured when an upholstery staple from a pneumatic staple gun entered under his right eyelid, requiring hospitalization and stitches.",1
"On or about September 6, 2016, at 5:20 p.m., a temporary employee was attempting to remove a piece of plastic from a running machine when the machine caught and partially amputated the employee's right index finger.",0
"On September 6, 2016, at approximately 6:15 p.m., an employee was entering the chicken house to catch chickens. While walking into the chicken house, an overhead bi-fold door, approximately 10' wide by 10' tall, fell and struck the employee on the head, knocking him to the floor. Threads of a nylon strap that held the door in the upright position broke and allowed the 150-pound door to fall. The door continued falling onto his left foot, fracturing his left ankle. He was hospitalized for surgery to repair the fractured ankle.",1
An employee was attempting to replace the plastic cover on top of a greenhouse when he slipped and fell 10 feet onto a concrete floor. He was hospitalized with a head injury.,1
"An employee fell from a truck while removing a ladder, suffering head and back injuries.",1
"An employee was attempting to dump a tilt hopper. He held onto the area where the hopper slides onto the forks and attempted to push the tilt hopper to empty it.  When it dumped, the hopper base pinched his finger between the fork and base, amputating the first digit of his left-hand pointer finger.",0
"An employee arrived to work and parked her car in the garage. She was using the enclosed stairwell when her knee gave out and she fell, breaking her right knee. She was hospitalized and had surgery.",1
"An employee opened the door to the compressor room. As he exited the room, a passing forklift ran over his right foot and lower right leg, pulling him to the floor. He suffered a broken right leg, rib, and jaw.",1
"An employee burned 90-foot long scrap rails to cut them in half and make them easier to move. One of the steel rails rolled over, hitting another rail and causing it to also roll over and crush the employee's left ankle. He required surgery.",1
"An employee was packing bottles in the ""blow mold"" area of a trimmer base when her right arm/wrist was hit and fractured by the moving equipment. The equipment's guard was in place.",1
An employee turned off a circular saw to remove cotton batting from the blade. Their finger contacted the moving saw blade and the finger was amputated above the nailbed.,1
"An employee tripped while pumping waste water. His left hand landed on the belt of the leachate pump, which pulled his glove and amputated his middle finger.",0
"An employee was using a sit-down powered industrial lift to retrieve a pallet that contained four 55-gallon drums. When the employee lifted the top pallet, the corner of the pallet broke, causing a 55-gallon drum to fall to the ground and strike another employee on the ground. That employee suffered a fractured right arm and hip, as well as back and neck injuries.",1
"An employee fell from a tree while trimming a branch, ripping his earlobe.",1
An employee had been helping a coworker move boxes. The employee was later walking toward a table and went to bend over when the employee's back seized up. The employee was hospitalized with a back injury.,1
"An employee was operating a forklift truck when he hit a column and was ejected from the vehicle, striking his head on the floor and requiring hospitalization.",1
"An employee was moving steel tubes using a dolly. While taking a tube from the dolly, the employee's middle and little fingers were caught and amputated.",1
An employee accessed the facility roof to conduct preventive maintenance inspections on exhaust fans. He went to ascend a fixed ladder to access a lower portion of the roof. He was standing on the second or third rung when the ladder extension on the top of the ladder failed and he fell approximately 12 feet to the roof level below. He was hospitalized for back and leg pain.,1
"While working, an employee tripped over a PVC pipe, striking her head and face on the concrete floor and breaking her left arm.",1
"An employee's arms were pulled into a conveyor guard while the employee was attempting to retrieve a package. The employee suffered fractures to both arms, requiring hospitalization.",1
"An employee was waiting to remove the outer wrap and core plug from rolls of paper being lifted by a forklift. The third roll was not secure in the clamp and fell onto the employee's feet, causing a contusion to the top of the left foot.",1
"An employee was repairing the rod on a bore machine when a clamp closed on his left hand, amputating his middle fingertip.",0
"An employee was operating a 4x6 roll-up machine. While she was straightening a rug that became off-center, her right hand/arm was pulled into the machine's rollers, fracturing her forearm.",1
An employee was palletizing televisions when she experienced abdominal pain around her naval area. She was hospitalized with a possible hernia.,1
"An employee was picking up trash on the side of the road and throwing it on a trailer when a vehicle struck the trailer from behind, causing the trailer to shift and break the employee's leg.",1
An employee was cutting bacon with a knife when the blade amputated his right index fingertip.,0
"An employee was helping to move a 5-foot-long pipe when the pipe smashed the employee's left pinky finger, requiring hospitalization for surgery.",1
"An employee attending valeted vehicles was struck by a customer's car, which was parked without the brakes engaged. The employee suffered a back injury.",1
"On 9/7/16, an employee was moving wooden pallets by hand. He picked up one pallet and held it against his abdomen while bending down to pick up a second pallet. In doing so, two pieces of wood punctured his abdomen. One piece immediately fell out; the other had to be removed at the hospital.",1
"An employee was standing to the left side of a truck adjacent to the lift gate with his right hand stabilizing a window and left hand on the edge of the truck bed when a coworker raised the lift gate. His left thumb was caught between the lift gate and the truck's tailgate, causing a deep cut that required hospitalization.",1
"An employee was checking a vacuum box container to see which box to load onto the truck. The employee then slipped and fell, striking the vacuum box platform.",1
An employee was working outside performing pre start-up duties for the plant and lost consciousness. He was transported to the hospital where he was treated for dehydration.,1
"On September 07, 2016, at approximately 2:00 AM, an employee was unloading a fluid trailer during fluid service operations. While he was disconnecting a hose, pressure released and he fell to the ground, sustaining a head injury.",1
An employee fell down the stairs.,1
"While removing a chain from a sprocket, an employee's hand was drawn into the sprocket, amputating the index finger and injuring the middle, ring, and little fingers.",0
"An employee stood up, lost his balance, and attempted to catch himself when his hand entered an industrial fan, amputating his pinky and ring fingers.",1
"An employee was working in an oil pit when he became dehydrated, requiring hospitalization.",1
"An employee was cutting a concrete form on a window sill using an angle grinder with a cut-off blade. The grinder went through the plywood and struck the concrete, resulting in a kickback that caused the grinder to strike and deeply lacerate the employee's chest. He was hospitalized.",1
An employee sustained broken ribs and a punctured lung when he fell off a ladder at a height of 6 to 10 feet.,1
"Two employees were removing form panels from an upper elevation while working from the basket of a lift. One of the employees had his right hand on the basket's handrail, which came in contact with the building's steel beam. The employee suffered a partial amputation of the right ring fingertip.",0
"On or about 9/7/16, at 3:45 a.m., an employee was operating an electric pallet jack with a 6' load when the employee collided with another pallet jack operator. The collision resulted in the employee's left foot being struck by/caught between the pallet jacks, partially amputating three toes.",0
An employee was cleaning a jammed outlet pipe on the spin dryer and amputated a fingertip.,1
"An employee was pushing a cart down the hallway, tripped, and fell fracturing her right leg.",1
"On September 7, 2016, an employee was hospitalized overnight for dehydration after building a brick wall with the mason group.",1
An employee was driving on his route and felt ill. He hospitalized and treated for heat illness.,1
An employee suffered burns to the chest and forearms after a small explosion of 10% nitric acid occurred.,1
An employee was in the process of pulling a tarp over a load of lumber on a flat bed truck. The employee was standing on top of the load approximately 10 feet in height when he slipped and fell hitting his head on the concrete floor and causing a head injury.,1
"A temporary employee became upset and threw a broom and a shovel through an open dispatch window, then charged into the office and struck an employee in the back of her head with the broom handle. The temporary employee then struck her in the face with his fists, breaking the employee's jaw and causing cuts to her hands and face.",1
An employee was delivering packages weighing between less than a pound to 50 pounds at offices in a strip mall when he felt ill. He was hospitalized and treated for heat exhaustion.,1
An employee was hospitalized after experiencing heat stress symptoms while adding mulch to an area.,1
"While stepping off a platform, an employee lost her balance and fell onto the cement floor, fracturing her right hip.",1
"An employee was dismantling a scaffold when the pin from the toe board came out, lifting the guardrail up. The employee went to grab the guardrail as it was falling and fell with it. The employee fell approximately 20 feet to the ground below, fracturing an arm and cheekbones and suffering numerous contusions.",1
The employee was attempting to connect a hydraulic hose and had hydraulic fluid injected under the skin on his left thumb when the line became charged.,1
"An employee was flagging traffic when he was struck by a vehicle. He suffered cuts to his head, fractured vertebra in his neck, a broken collarbone, and a broken left leg.",1
"An employee was on a scissor lift,  breaking loose a 4-inch blow pipe at the flanges. A forklift was holding up the line and as the employee removed the bolts to the spool piece, the line dropped and smashed his finger between the flanges he had unbolted and the flanges of the pipe below. The forklift raised the pipe and when the employee moved his hand back and he suffered an amputation.",1
"An employee was reviewing drawings in a work cart, misjudged some material over the floor, and tripped over a spool of wire or piece of metal. The employee fell to the ground breaking his right wrist.",1
"An employee was walking beside a moving large rubber-tired loader, providing hand signals and verbal guidance to the loader operator who was transporting a piece of equipment, when the loader tire ran over the employee's left foot. He suffered a broken left foot that required hospitalization and surgery.",1
"On September 7, 2016, at approximately 8:38 PM, an employee was driving across the yard in a golf cart when his left hand was smashed between the cart and an adjacent garbage dumpster. He suffered two broken bones and an open wound, requiring hospitalization.",1
"An employee was using a circular saw to cut 2x4 pieces of wood when the saw kicked back and struck the employee's left hand, amputating the ring finger at the middle joint and the middle finger just below the fingernail. The employee was hospitalized.",1
An employee was setting up a scaffold to work on painting a ceiling and fell off the scaffold breaking their heel.,1
While disconnecting a pressurized flexible hose an employee was struck in the abdomen/chest area by the hose. The employee suffered internal bruising and fluid build up.,1
An employee was servicing an elevator when he was caught between the elevator and was hospitalized with injuries to his abdominal area.,1
"An employee was bringing down a pallet of merchandise with a reach truck. While lowering the merchandise, her right harm caught a piece of metal, lacerating her right elbow.",1
"An employee was decorating from a 3-foot stepladder. While turning to descend the ladder, the employee slipped and fell to the floor, lacerating the head and fracturing the right knee/leg.",1
An employee was attacked by a patient and was hospitalized for multiple facial contusions.,1
An employee was cleaning a packer machine when his hand contacted the area where a compressing piston was moving and his right index finger was squashed. His right index finger had to be surgically amputated.,1
An employee fell 15 feet from a metal deck to the concrete floor below and broke a leg.,1
"An employee was putting a collar on the shaft of a fixture on a machine when it energized. The employee's right thumb tip was caught between the collar and the shaft on the machine, requiring surgical amputation.",0
"On or about September 7, 2016, at approximately 12:05 a.m., an employee was caught between steel tubes rolling on the power conveyor, suffering leg and abdominal injuries that required hospitalization.",1
An employee was threading and preparing to install a fire water pipe when several employees began to experience respiratory irritation. A visible plume of hydrofluoric acid gas was in the vicinity. The crew began evacuating the unit and an employee was hospitalized for treatment.,1
"On September 7, 2016, at approximately 12:05 p.m., an employee was lifting a manhole lid when it slipped and pinched his finger between the cover and manhole opening, amputating his right middle fingertip.",0
An employee sustained a broken tibia when he was kicked by a cow while working in the cattle pen.,1
An employee fell 37 inches off a fixed ladder when the last rung shifted and landed on the grating below. The employee suffered fractured ribs and a collapsed lung.,1
"On September 7, 2016, an employee working on insulating pipes was hospitalized for possible heat illness.",1
"An employee was scanning chicken, went to turn around, rolled her ankle, and fell to the floor, hitting her head. The employee was hospitalized for a broken hip and head lacerations requiring staples.",1
"An employee was unloading a tractor trailer using a PIV when the trailer moved approximately 2 feet. The employee in the PIV dropped about 8 to 10 inches due to the movement of the tractor trailer, causing a back injury.",1
"An employee climbed into the cab of a new truck to see if it was automatic or manual transmission. As he was getting out of the truck, he fell and struck his head on the ground, fracturing his skull.",1
"While disconnecting the hook from a lifting eye, an employee's right middle finger was caught and crushed between the street plate and the hook.",1
"An employee was climbing an A-frame ladder to fix the PA system when the ladder slipped from under him. He fell to the ground, breaking his left foot and requiring surgery.",1
An employee was cutting a stake with a skill saw when the saw amputated about one inch of his right index finger.,0
"An employee was getting ready to weld a fabricated steel panel when he stepped into a precut lightening hole and fell, breaking his patella and requiring surgery.",1
"An employee was working from an aerial lift and moving a sign when he fell from the lift and cut his shoulder, requiring hospitalization.",1
"On 9/9/2016, at approximately 1:30 PM, an employee and coworker were trying to uncrate electrical switchgear. They were using tools to pry the switchgear's cabinet off the wooden pallet when the switchgear shifted over onto the employee's right foot and knocked him backwards, leaving him hanging over the mezzanine by his caught foot.  When his coworker righted the cabinet, it freed his foot, causing him to fall head-first to the concrete floor below. He suffered skull fractures, right leg/ankle fractures, and shoulder and arm injuries, requiring hospitalization.",1
An employee was cutting tails off hides with a knife when the blade entered his boot and cut his left ankle.,1
An employee was setting up a wire reel when the reel axle came down and crushed the employee's left index fingertip between the axle and the jack.,1
An employee was washing down his truck with the tag trailer down when the truck moved forward and pinned him underneath the wheels of the tag trailer. His lower body and pelvis were crushed.,1
"While working from floor level and moving scrap into a loader bucket, an employee slipped and fell to the ground, fracturing the left hip bone and requiring hospitalization.",1
"An employee was performing service/maintenance on a roof top refrigeration unit. While testing the temperature of the refrigeration line, the employee's right hand was struck by a fan blade, lacerating and fracturing the right middle finger. The employee was hospitalized.",1
"On or about 9/8/16, an employee was loading concrete blocks onto a tractor trailer at a worksite. The employee fell from the tractor trailer and hit his head. He was hospitalized with bleeding on the brain.",1
"On or about September 8, 2016, at approximately 3:35 a.m., an employee was turning a belt within a bailer when his fingers were pinched between the belt and sprocket. His left index and middle fingertips were amputated.",0
"An employee was standing between a parked forklift and the discharge side of an automatic-ejecting baler. The baler pushed out a bale and pinned the employee's calf between the bale and the fork of the forklift, lacerating the employee's lower leg.",1
"An employee was cleaning asphalt material from the back of a truck with a scraper when the truck's tailgate moved and trapped his right pinky finger in a pinch point, amputating it to the second joint.",0
"An employee fell while walking on a wet floor in the kitchen area of the facility, suffering mid-back pain.",1
An employee was using a portable bandsaw to cut a metal I-beam when the saw blade amputated the employee's left index finger.,0
An employee was working the drive-thru window when a coworker poured water into the chili-warmer and created steam. The employee experienced breathing difficulties from steam exposure and was hospitalized.,1
An employee was delivering packages when he experienced cramping. He was hospitalized for dehydration.,1
An employee was climbing onto a flatbed truck and slipped and fell approximately 4 feet to the ground injuring his back.,1
An employee was struck by a dump truck resulting in an in-patient hospitalization.,1
"An employee stepped onto wet grass, slid, and fell to the ground, breaking his right lower leg and requiring hospitalization.",1
"While climbing into construction equipment, an employee slipped and fell onto an operating handle, suffering a broken left rib and punctured lung.",1
"An employee struck his leg on a car tire and opened up a previous wound, which would not stop bleeding and required hospitalization.",1
An employee was moving/repositioning a ventilation fan when a foreign particle blew into the employee's left eye. The employee was hospitalized and had eye surgery.,1
"An employee was running cable from a residence to a terminal when his cable line was snagged by a box truck. He was pulled off of his ladder and fell approximately 28 feet, injuring his back.",1
An employee was adjusting a valve on a tanker truck when the valve closed and removed the right index fingertip.,1
"On or about 9/8/16, an employee was adjusting the forks on a forklift when the left pinky finger was caught and amputated between the forks and a slide bar.",0
"An employee was shoveling an excavation wall next to a roller when the roller slid down and pinned his leg, causing injuries.",1
An employee suffered hand/finger injuries as he was helping to unload corrugated metal sheets/sea walls from a truck. The metal sheets were being removed with a back-hoe and chain.,1
"An employee was filling up a propane tank when a splitter valve became unscrewed and liquid propane leaked out, burning the employee's right hand.",1
An employee was working on the truck collecting trash and began cramping. The employee was hospitalized for possible heat stress.,1
An employee severed his left index finger and lacerated his left middle finger.,0
An employee was walking between a cart and a skid that had boxes of trim on it when the boxes of trim rolled off onto his ankle and pinned him on the ground. He was hospitalized and had surgery for a broken left ankle.,1
"On September 8, 2016,  an employee fell to the ground while pulling shingles off a roof, breaking bones.",1
A temporary employee's hand was caught and mangled in a conveyor roller.,1
"An employee was going to weld on the casing of a drilling rig. The employee was sitting on/near the control panel with the right hand on the traveling chain and left hand near the controls. The employee's left hand bumped the controls, causing the traveling chain to move. The chain caught the employee's right hand, amputating three fingertips to the first knuckle.",0
An employee partially amputated the right ring finger while slicing vegetables with a mandoline slicer.,1
An employee suffered serious injuries when his hand was caught in a lint cleaner. The lint cleaner was unguarded at the time.,1
"An employee was using a double spreader chain with hooks to hoist a steel plate weighing approximately 1,200 pounds. The hook came loose from the plate and struck the employee's right leg, breaking it. The employee was hospitalized.",1
"An employee was moving a portable bagging conveyor when the legs folded, causing the employee to fall onto the conveyor. The employee's left- and right-hand fingers were then caught between the legs of the conveyor and the conveyor itself. The left ring and middle fingers were amputated to the first knuckle, and the right index finger required stitches.",0
"An employee was struck by a 70-pound flange that fell off a passing forklift, sustaining a broken right fibula.",1
"An employee was up approximately 8 to 10 feet on a roof when he fell through an uncovered skylight opening to the ground and sustained serious head injuries, spleen injuries, and nine broken ribs.",1
An employee was feeling to see if there was a leak at the location when his right middle finger slipped into a hole. A butterfly valve below the hole actuated and caused a partial amputation of the right middle finger.,0
"An employee was performing various tasks in a barn, such as cleaning stalls, walking horses, and filling water, when he passed out due to dehydration and heat exhaustion. He was hospitalized.",1
"On September 9, 2016, an employee attempted to remove a part from a welding machine while a setup person was making adjustments on the machine. The welding tip came down and amputated the employee's right thumb.",1
An employee was found passed out after cleaning with 409. The employee was hospitalized for an allergic reaction/respiratory irritation and breathing problems due to the chemical cleaner.,1
An employee was unjamming the slitter machine and experienced a crushing injury to a fingertip.,0
"An employee was walking on an aerial work platform, 12 inches high, when he tripped, fell, and broke his left leg.",1
An employee was carrying and tying a rebar throughout the work day in a warehouse when he began to feel unwell. He was hospitalized due to heat stress.,1
"An employee slipped and fell on a wet painted ramp while helping people onto a bus, breaking the left leg.",1
An employee was carrying packages down the stairs when the back of the employee's shoe caught on the previous stair. The employee fell down 2 stairs and broke the left ankle.,1
An employee was working on the tear tape machine and was loosening bolts to the supporting bar when the bar fell and forced his right hand down and into the hot plate area. He suffered third-degree burns on the back of his right hand.,1
"An employee was removing broken pieces of concrete from a recently demolished road deck. He was flipping the lagging boards when he slipped and fell through the boards 28 feet to the ground below. He suffered a broken pelvis, ruptured spleen, and broken ribs and was hospitalized.",1
An employee was climbing on a vertical concrete column. The employee fell and landed on a concrete column below and a coworker. The employee was hospitalized.,1
"An employee was working from the ground prepping for setup at a home site when the homeowner attempted to pull a tarp, which was held down by bricks, off the roof. The bricks fell from the roof and struck the employee in the head, causing a concussion that required hospitalization.",1
"An employee was positioning a scissor lift to paint some structural steel on the concourse. As he walked backward out of the lift cage to climb down the ladder, he fell 9 feet to the concrete ground below and struck his head. He suffered a wrist injury, broken collarbone, and head injury.",1
An employee fell off of forklift blades and suffered suspected broken ribs.,1
"An employee was taking trash to the ground floor when he tripped over an object and fell to the ground, fracturing his arm and hip and requiring surgery.",1
"An employee was delivering feed to a client when the line became clogged. When he attempted to unclog the nozzle, his right ring finger and right middle fingertip were partially amputated. The auger was running at the time of the incident.",0
"While loading milk into a tanker truck, an employee's right middle fingertip was pinched and partially amputated between a valve and the tanker truck wall.",0
"On or about September 09, 2016, an employee was cutting a small section of 3"" PVC piping with a battery-powered bandsaw. The employee's left middle finger came in contact with the blade, amputating the fingertip.",0
"Employees were uprighting a steel beam while constructing a gas station frame. A beam was being hoisted when one edge became stuck on the dunnage. When the beam swung loose, it struck an employee, causing the employee to be caught between the hoisted beam and a beam on the ground. The employee suffered a compound fracture to the left leg.",1
"An installation team unpacked a crate of actuator arms and placed them on blocks. One of the blocks shifted, causing an actuator to fall. When an employee attempted to catch the actuator, it crushed three fingers on his left hand.",1
An employee was operating a press and was setting steel into the machine using a foot control when his left index and middle fingers were caught in the press.,1
"An employee tripped on a process pipe in the aging cellar and fell to the floor, sustaining a broken hip.",1
"While installing insulation on the back side of a kitchen exhaust hood duct, an employee's hand came into contact with a live exposed 277 VAC wire. The employee received an electrical shock and was hospitalized.",1
"An employee was performing maintenance on a dock plate when an unknown object struck the employee's left hand, lacerating it and breaking bones.",1
An employee was using a pneumatic nail gun to secure roof decking when a nail shot through the employee's shoe into the top of the foot and was embedded in the bone. The employee required overnight hospitalization and surgery.,1
"An employee's arm was between two flanges, one stationary and the other being pulled by a come-along. The non-stationary flange came free and caught the employee's arm between the flanges, fracturing his right ulna. He was hospitalized.",1
An employee was injured when a cardboard bail weighing approximately 700 to 900 pounds fell on top of him. He was hospitalized.,1
"While setting up a handheld grinder, an employee's hand was caught between the grinding wheel and the lift table, avulsing/amputating the employee's left thumb tip.",0
"An employee was performing street trash collection when he experienced weakness and high blood pressure due to heat-related illness, requiring hospitalization.",1
An employee suffered a partial amputation to the left ring fingertip while cutting insulation boards with a table saw.,0
"An employee was setting equipment when he became dizzy due to heat stress and fell out of his truck, striking his head on the ground. He was hospitalized with a head contusion and a drop in blood pressure.",1
"On 09/09/2016, an employee's right index finger was amputated to the knuckle.",1
"On or about September 9, 2016, an employee was unrolling scrap film from one roll and placing it onto another roll when the edge of the roll slipped off the roller bearings. The employee and a coworker attempted to lift the roll approximately 1/16"" back onto the roller bearings, but the roll shifted, pinching and amputating the meaty portion of the left middle finger between the roll and the cradle.",0
"An employee was using a band saw to cut pork loins when his right middle finger entered the blade, amputating the fingertip.",1
"On or about 09/10/16, an employee was operating a pallet jack. The employee's foot was trapped and crushed underneath the pallet jack's platform while making a turn, requiring hospitalization.",1
An employee was riding around the sales lot in a golf cart and fell out of the golf cart suffering head trauma.,1
"An employee was loading a tire rim into a truck when the tire rim slipped and pinched his left pinky finger between the rim and a grease gun, fracturing his fingertip and requiring surgery.",1
"An employee was using a vertical meat cutting bandsaw to cut short ribs. The employee's glove became caught in the working section of the sawblade, resulting in the amputation of the left ring and little fingertips.",0
An employee suffered a partial amputation of the right thumb when his finger was caught between a metal table frame and a metal box that was raised by a forklift to be moved.,0
"An employee was grading lumber in the planer mill (dry end) when a lumber plank ""crossed-up"" and slowed/stopped production. When the employee tried to clear the ""crossed-up"" lumber plank, his left hand was crushed by the plank and a u-shaped piece of steel lacerated his left hand between the wrist, thumb, and first finger. He suffered a partial de-gloving and a broken bone in the thumb.",1
An employee was attempting to unjam a compound machine when the plate came down and amputated the employee's right middle fingertip.,0
"An employee was stacking a plastic pallet on top of another pallet when he slipped and fell downstairs, breaking his leg. He was hospitalized and had surgery.",1
An employee was lifting a dock plate when the plate fell and crushed three left-hand fingers. The fingertips had to be partially amputated.,0
"An employee was troubleshooting a press due to its unloader fingers not extending. He was standing on the press exit conveyor and platen edge. When he moved the wires on the unloader, the unloader moved in and down. The movement caused him to trip and fall down onto the platen, where he was pinned by the unloader and suffered burns.",1
"An employee was standing on a scaffold to set a stone in place. The stone panel slipped out of the synthetic webbing sling and struck the scaffold platform, causing the planks to separate. The employee fell through the scaffold about 35 feet, breaking his right leg and right ankle.",1
"An employee was cutting a palm tree with a chain saw while standing on an extension ladder. The chainsaw kicked back and lacerated his left bicep, requiring hospitalization.",1
"An employee was driving his forklift to put product away when he lost control of the lift. When he put his left foot out to stop the lift, it was caught between the lift and storage racks, amputating the two smallest toes.",1
"An employee fell about 40 feet while installing a new valve, suffering head and body trauma.",1
"Employees were working inside a chemical processing reactor, lowering a tray panel to a lower level. The tray panel fell 18 to 24 inches and struck the left foot of an employee who was removing the rigging. The employee sustained a big toe fracture.",1
"An employee and his crew were loading steel coils onto a barge for shipment. As a coil was being lowered onto the saddle-shaped dunnage, the employee used his right foot to adjust the position of the dunnage board. He missed the board and the coil came down on top of the steel-toed cap of his boot, which collapsed onto his right toes. His big-toe nailbed was crushed and his second toe was fractured. His third and fourth toes were surgically amputated just below the nailbed.",1
"On 9/11/2016, an employee was cleaning the sprocket and chain on an oven. When the oven started, four fingers on the employee's left hand were amputated.",1
"On or about September 11, 2016, an employee was helping to replace a hydraulic cylinder when the employee's finger was caught between the end of the cylinder and the mounting collar, amputating the left index fingertip.",0
"An employee was working/walking near the exterior of the mobile kitchen trailer when a vertical swinging door on the mobile kitchen trailer suddenly fell, striking the employee. The employee suffered fractures to the nose, hip, pelvis, and cheek.",1
An employee was inspecting existing cable wiring on a third-floor balcony. The balcony railing broke and allowed him to fall approximately 30 feet to the ground below. He broke his lower left leg and suffered a mild concussion and contusions.,1
An employee was prepping food with a chef's knife when his left thumb tip was severed by the blade.,1
"An employee was working on a rig floor. A casing basket fell into the tongs of a nearby rig, and the tongs would not release. Both retaining chains to the tongs released and the tong movement lever activated. The tongs swung and hit an employee, pinning him between the tongs and a derrick mast. He suffered one broken rib and one bruised lung.",1
"An employee was troubleshooting a blockage in a dry mix unloading machine. As he was removing a flexible coupling, his finger was lacerated by a rotary air lock fin. He suffered a partial amputation of the right-hand middle finger above the first joint.",0
"An employee was pulling a basket out of the extractor when his right pinky finger was caught between the wall and the basket, amputating 1/2-inch of the fingertip.",0
An employee fell from a roof to the concrete ground below and was hospitalized with broken bones.,1
An employee was pulling a metal object out of a tire during repairs when the object flew out of the tire and hit the employee in the left eye. The employee was hospitalized.,1
"While climbing off a work platform, an employee lost his grip on the side rail and his leg was caught between the rail and platform. His leg was severed and required hospitalization.",1
An employee was changing a water nipple/bracket when a pig pushed him up against the wall causing the amputation of the second finger on his left hand at about the first knuckle.,0
"An employee was fixing a hunting tree stand on the business owner's property. He was standing on a ladder tightening a strap with a ratcheting tool. The strap broke as he was tightening it, causing him to lose his balance and fall approximately 6 feet to the ground. He was hospitalized with fractured vertebrae.",1
An employee amputated two fingers while repairing a chain on a bicycle.,1
"While working on a grain barge, an employee was struck by a loose mooring cable, suffering bruises and a possible concussion.",1
An employee became overheated and suffered from heat exhaustion while flagging traffic.,1
An employee fractured his vertebrae while attempting to lift a military trailer tire for repairs. He was hospitalized.,1
"An employee was abrasive blasting inside a ship tank when electrical power to the dry dock was lost momentarily on two occasions, causing the pressure hose to stop. When the electrical power was regained, the employee lost control of the nozzle and the abrasive grit struck/lacerated the employee's left wrist, left thigh, and left bicep. The employee was hospitalized and had surgery.",1
"An employee was supervising as a forklift operator was unloading switchgear. While retracting the forks, the forklift operator backed into a lip on the ground, which caused the forks to lift up and the switchgear to tip over. The switchgear fell onto the employee's right leg, breaking two bones.",1
"An employee was working at the post peeler when the chain that rolls the post peeler became jammed and would not turn over. He shut everything off, but the belt energized and caught his hand in the gear box belt and pulley, amputating his left ring finger.",0
"An employee was tightening a rivet buster with a pipe wrench as it was secured in a vice. The jaws of the pipe wrench then slipped, causing the employee to fall to the ground. He injured the right side of his hip and was hospitalized for surgery.",1
"On 9/12/2016, at 4:30 PM, an employee was driving a powered industrial truck down an aisle. As he turned left, he crashed into a rack and suffered a left thumb amputation.",0
"On or about September 12, 2016, an employee was repairing a vehicle when the unchocked vehicle rolled from its ramp and struck the employee in the head, causing lacerations that required hospitalization.",1
"While attempting to set grating to weld it into place, an employee fell approximately 30 feet from a mid-point rest platform and suffered a broken collarbone and nose. The employee was hospitalized overnight.",1
An employee suffered a hernia and was hospitalized.,1
An employee was moving products around for scanning when he slipped and fell off the back of the trailer fracturing the right shoulder.,1
"An employee was adjusting the legs of a floor scale while a coworker lifted the corner of the scale with a pry bar. The pry bar slipped and the floor scale fell and pinched the employee's left index finger, amputating his fingertip.",0
"An employee's left Index finger was caught in a man door, amputating his fingertip.",0
"An employee was removing a beam cross framing when the existing welds connecting the end dam steel to the bridge beams broke free and struck the employee, fracturing his leg, knee, and foot. He was hospitalized.",1
"An employee visually determined that a metal flange on a transfer had become disconnected from a metal plate, allowing a transfer roller to fall. When he touched the flange, the metal plate became loose and smashed his right ring finger between the metal plate and flange. The transfer was locked out at the time.",1
"An employee was cutting insulation with a knife when his hand slipped, cutting and puncturing his upper right forearm. He required surgery.",1
"An employee was operating machinery that re-rolls tire liners. She was observing a liner being wound at the machine and was adjusting the liner when her gloved hand was caught in the winding liner, fracturing her right forearm.",1
"An employee slipped off the second step of a ladder while descending and fell to the ground, fracturing his left hip and requiring surgery.",1
"An employee was holding the corner of a piece of 3/8"" steel plate as it was being cut by a shear. The blade failed to cut but caused the plate to tip, applying pressure to the plate corner, which amputated the employee's right middle fingertip.",0
An employee was stripping a concrete form in a building basement when he lost his balance and fell approximately 4 feet onto a concrete slab. He was hospitalized with a concussion.,1
"An employee was walking to the rear of a truck when a piece of equipment slid and struck the employee, breaking the right leg.",1
An employee was servicing and performing maintenance on a package boiler when energized thermal energy (high temperature water) breached the employee's boots and caused second-degree burns to the right and left feet.,1
An employee was helping a coworker place a forklift battery into a forklift when the battery fell over on its side and smashed two of the employee's left-hand fingers (3rd and 4th finger) between the battery and the concrete floor.,0
"An employee was standing on a step ladder torqueing a bolt. When the bolt broke loose, he lost his balance and fell to the deck, bruising his side and possibly breaking ribs.",1
"An employee was helping to move a stretch roller with the motor jack. The stretch roller fell over and landed on his right foot/lower leg, breaking three bones.",1
An employee fell approximately 10 feet while attempting to descend from the top of an office (mezzanine) that is located inside an aircraft hangar. He was hospitalized with two broken wrists.,1
"An employee was using a band saw to cut material when the material kicked back and struck the employee in the chin-jaw area, causing a laceration.",1
"An employee was stepping down from a 12-inch-tall foot stool when he fell and struck the ground, landing on and fracturing his left hip.",1
"On or about September 12, 2016, an employee was loading a trailer. When she stepped down onto the belly on the trailer, she twisted her knee and was hospitalized with extreme pain.",1
"An employee was adjusting a bag of salt while it was held up by a forklift when his left ring finger was pinched between the load and the forks, amputating his fingertip.",0
"An employee was working with a take-up spool on a winch when the employee's fingers were caught in the spool, amputating the middle and ring fingertips.",0
"An employee was conducting a basic horsemanship training course when he fell off his horse during a warmup drill, injuring his head and chest.",1
An employee was unclogging the mixer machine and amputated the right middle and ring fingers.,0
An employee was on a work platform clearing a product line when he slipped and got his hand caught in a metering valve resulting in the amputation of a finger and thumb.,0
An employee was repairing a vehicle body by hammering out dents when he smashed his index finger with a manual hammer. The finger was lacerated and infected.,1
An employee was in training learning to drive a standing reach truck. The employee's left hand was caught against a wall and fractured.,1
An employee was checking the belt tension and adjusting the motor bracket on a conveyor when his glove was caught in the belt. The pulley then pinched and amputated his left-hand index finger. The belt guard was removed at the time.,0
"An employee was connecting the top half of a meter to a pole when a tool he was using contacted the neutral wire, causing an arc flash that burned his face. He was hospitalized.",1
An employee was setting up a machine when it was activated via the foot pedal and amputated his right middle fingertip.,1
"An employee was using a date stamper on boxes when her left index finger was caught in the date stamper mechanism, amputating her fingertip.",0
"An employee was clearing the large coffee bean hopper at a height of approximately 35 feet. He lost his balance and fell through the opening for the permanent ladder access. He fell 12 feet to a lower level and broke his right leg, requiring hospitalization. A full guardrail system was in place at the time.",1
An employee was operating a hydraulic side-mounted lift on a trash truck when his right middle fingertip was amputated.,0
"An employee was dumping sacks of rice back into the cutback system when stepped into a floor-mounted hopper and made contact with the auger system, amputating his left lower leg.",1
"An employee was descending a stairway while carrying two cardboard boxes in her left hand. She missed the last step above a middle landing and fell onto the landing. Both of her feet were bent backwards, fracturing both ankles and requiring surgery.",1
An employee was cutting a piece of wood with a skill saw when the saw kicked back and amputated two fingers.,0
"An employee was cleaning the filling machine and emptying it of liquid. She then attempted to see if there was any remaining liquid. Her left index finger was inside a quarter-sized hole where a piston was when the machine activated, causing the piston to move and amputate approximately 1/8"" of her left index fingertip. The machine's air source was connected at the time of the incident.",0
"An employee was installing a steel plate on an inner-bottom using an overhead crane. As the employee lifted the steel plate with the crane, it became wedged between two steel frames. He continued applying lifting force with the crane and the plate sprang loose, striking him the face. He suffered multiple facial injuries, including trauma, a broken nose, an eye socket fracture, and a skull fracture.",1
"On September 13, 2016, an employee was placing concrete when he became ill due to dehydration and lost consciousness. He was hospitalized.",1
"An employee was trying to de-escalate a resident having a mental breakdown. The resident sprayed the entire contents of a fire extinguisher in the basement of the building. The employee inhaled the fire extinguisher contents and experienced breathing distress, requiring hospitalization.",1
An employee suffered a fingertip amputation.,0
"An employee was walking to the package car to determine how many packages were in the car when she slipped on a walking surface and fell. She tried to catch her fall and her hand went between the tire and the bottom of the car frame, breaking her right arm.",1
"An employee was in an aerial bucket, trimming trees to get to a communication cable. As he moved the bucket, it touched the powerline, resulting in an electrical shock. He suffered severe burns to both arms and was hospitalized.",1
"On or about September 13, 2016, an employee was driving a side-by-side vehicle when the back swerved out and overturned landing on the employee's legs. He suffered a compound fracture and required surgery.",1
"An employee was standing on a 3-foot scaffold platform, screwing sheetrock into the metal studs when he lost his footing and fell off the scaffold. He fell through the open door onto sheetrock that was on the other side. He caught the sheetrock corner on his right side, breaking two ribs.",1
"An employee hopped approximately 4 feet from a loading dock down to the lower level. He stumbled and fell, lacerating his right wrist with a sharp metal object (no-hub coupling) he was holding. He was hospitalized and required surgery.",1
"While troubleshooting electrical problems in the main control panels, an employee made contact with a phase from the bus and was shocked, suffering arm burns.",1
"An employee was pushing a heavy trash bin with a pallet jack when it struck a concrete column, causing the load to shift and crush the employee's finger between 3/4"" plywood and the edge of the metal trash bin. His right middle fingertip was amputated without bone loss.",0
An employee fell while moving boxes and injured his left hip.,1
"An employee was performing maintenance on a conveyor when his hand was caught between the conveyor and the sprocket, amputating his left thumb.",0
"An employee was walking in the warehouse when he stepped on an extension cord and lost his balance, falling to the ground and fracturing his right hip.",1
"An employee was standing on a step stool reaching up for equipment when she fell, sustaining head injuries including brain bleeding and requiring hospitalization.",1
"An employee was leaning over to place his cell phone in his pocket. As he tried to steady himself with his right elbow against the hallway wall, he missed the wall and fell backwards onto the floor, breaking his upper thigh/hip area.",1
"An employee cut a hole in the roof to install a vent curb and then fell 15 feet through the hole to the concrete floor below, sustaining leg and pelvic fractures. The hole was uncovered at the time of the incident.",1
"An employee was operating an overhead crane. He was moving the overhead trolley into position over the load by trolleying toward his position. The hook of a rigging chain caught on the flange of an I-beam girder to be moved, knocking the 4,600 lb. girder over onto him. The flange of the girder struck his lower left leg, causing a compound fracture just above the ankle.",1
"An employee was pulling MC cable on a catwalk and had to step over some ductwork when his heel caught some of the ductwork, causing him to trip off the catwalk and fall 15 feet through a ceiling. He broke the femur, scapula, and patella on the left side of his body. There was no railing on the catwalk at the time of the incident.",1
"An employee was being lifted by his co-workers in order to pass tools to the other side of a 10-foot fence. He fell from their hands onto the concrete below, suffering an elbow injury that required hospitalization and surgery.",1
"On or about September 13, 2016, an employee's right hand became caught in a tag line that was attached to the butt of a 40-foot pole. The employee suffered a broken right arm and femur.",1
An employee unplugged the carding machine and then opened the door to clean out debris. The machine then amputated his right index fingertip. The machine was still in motion at the time.,0
"An employee was walking up the stairs in the stockroom when she lost her balance and fell, suffering a pinched nerve in her foot.",1
While unloading a trailer by hand an employee suffered a possible heart attack. The employee was admitted to the hospital.,1
An employee suffered a partial left finger amputation while changing the de-hacking brick machine settings for the next product size that was to be packaged.,0
"On or about September 13, 2016, an employee was operating the small milling machine when his glove snagged on the millings and his hand was caught in the rotating tool at the point of operation. He suffered right-hand fractures and lacerations that required hospitalization.",1
"On 09/13/2016, at 10:30 a.m., an employee was laying brick while standing on a 5-foot scaffold when he stepped back and fell off the scaffold, fracturing his left knee.",1
"An employee was operating the panel roll forming machine and was measuring a piece of panel that had to be cut. As he was running the piece through the machine, his left ring and middle fingers were amputated.",1
An employee was installing a roller jig section with a chain jack. The employee's hand was on the jig while his other hand reached for the chain jack. The jig shifted and caught his fingers between two pieces of steel.,0
"An employee was cleaning the chain on a motorcycle with a rag when the rag was caught in the chain. The employee's fingers were then pulled into the chain, amputating the right middle and pointer fingertips. The motorcycle wheel was spinning at the time.",0
An employee was adjusting the extruder machine when the roller caught his glove and hand. The machine was in operation at the time.,1
An employee slipped from the 3rd rung of a fixed ladder and broke his ankle.,1
"An employee was picking up a pallet behind a swing reach truck when the truck operator backed up and ran over the employee's left foot, fracturing the second, fourth, and fifth metatarsals.",1
"An employee was sliding an industrial ladder off a truck when his left pinky finger was caught between the end of the ladder and his steel-tip boot, amputating his fingertip.",1
"On or about 9/13/2016 at 12:00 pm, an employee was reaching for a sheet pan with cooked bacon when the pan tipped over and grease fell on her, causing first-degree burns to her face and neck.",1
"While retagging furniture in an elevated lift, an employee fell from the lift and hit the ground, requiring hospitalization.",1
"An employee was directing traffic standing next to a slacked cable when a vehicle passing by caught the cable, which hit and threw the employee to the ground. The employee suffered right knee and left hip injuries.",1
"An employee was helping to install a guide wire for a high voltage 7620 volt line. He was holding onto the guide wire at ground level while a coworker in an elevated aerial lift was tightening the guide wire bolt. The coworker came into contact with a live wire bolt, which energized the guide wire that the employee had in his hand. Both of his toes suffered electrical burns, requiring hospitalization. PPE was not worn at the time of the incident.",1
"An employee was walking down a hallway when her sandal caught, causing her to fall. She broke her left kneecap and required surgery.",1
"An employee was finishing her morning medication administration cycle when she was called into an apartment by another worker to help move a resident from her bed to a wheelchair. The resident began to lose her balance, so the employee tried to help her to the ground, suffering acute severe lower back pain with disc protrusion in the process.",1
An employee was operating a discharge spout with a rotary valve and amputated three fingertips.,1
"On 9/14/16, an employee was transferring cleaning chemical from a 55-gallon drum into a larger tote when the chemical transfer pump blew a hose off the hose bar and sprayed chemicals on the employee's face, arms, and torso. The employee was hospitalized with chemical burns.",1
"While stepping down from a 4-foot ladder, an employee missed the last rung and fell, impacting the elbow and requiring surgery.",1
"An employee was removing built-up rubber from the inside of a baling machine. As he was standing on a ladder to reach the top side of the machine, his hand was caught in the cover ram, amputating parts of his left index, middle, and ring fingers.",1
"An employee was removing a steam connection. The employee removed the fitting and was exposed to steam, suffering burns to the torso, right forearm, and right side of the face. The pressure in the line was not relieved at the time of the incident.",1
An employee's left ring fingertip was amputated while operating a panel saw.,0
"While carrying a machine with a cutting edge guard, an employee tripped and the guard of the machine crushed the employee's four fingers.",1
"An employee was changing a hydraulic hose on a front end loader when the pressure on the cylinder released, causing it to come down and strike him, pinning and breaking his arm between the frame and the bucket.",1
"An employee was feeding a chipper machine while tied around a rope for fall protection. The rope was pulled by a piece of machinery and gave way, allowing the employee to fall to the ground. The employee fractured both legs and dislocated a thumb.",1
"An employee was cleaning a clogged airlock system that had rotating blades in the airlock. The employee's left index finger made contact with the rotating blade, amputating his fingertip between the top of the finger and the first knuckle/joint.",1
"On or about September 15, 2016, an employee performing flagging duties in a construction zone was struck by a privately owned vehicle, suffering leg fractures.",1
"On or about September 14, 2016, an employee was a passenger in the company shuttle bus, commuting from the employee parking lot to the building. The company shuttle bus quickly braked to avoid another vehicle and the employee slid forward, striking her left abdomen on the seat in front of her.",1
"While descending a top stock cart/ladder, an employee missed the second step from the bottom and fell, suffering a hip fracture that required hospitalization.",1
"An employee was standing on the mezzanine level while cleaning the dryer hopper. He was using a hose and spraying water into a cleaning port at the top of the hopper. There are moving parts inside the hopper, and it has to be cleaned while the parts are moving. The employee climbed down to ground level at the base of the hopper. There was another port at the base of the hopper, which contained a vane valve on a rotating shaft. The employee's left index finger entered this port, amputating his fingertip.",0
"An employee was standing under an overhead crane performing rigging activities when a guard came loose from the overhead crane and struck the employee in the face and head. The employee was hospitalized with face and skull fractures, as well as a concussion.",1
"An employee was unloading a truck when she slipped and fell into the truck, fracturing her left ankle. She was hospitalized.",1
"An employee was operating a router. When he bent over to look at the router, his hair was caught in the router. The router pulled him in, and his face slammed into an angle iron frame. He suffered head trauma and face lacerations, requiring hospitalization.",1
An employee working in the kitchen suffered an amputation.,1
"An employee was feeling for a hole that needed to be patched on the outside of a corn leg's steel housing, which was leaking grain. The employee's left index finger entered the leg and was amputated above the first knuckle. The corn leg was not locked/tagged out at the time of the incident.",1
"An employee was loading a cow into a chute when the cow raised her head and smashed the employee's right hand next to the chute, amputating her pinky finger to the first joint.",0
"While using a pallet jack to move stock, an employee blacked out and hit their head on concrete, suffering a concussion.",1
"An employee was using the band saw when his left hand slipped into the blade, cutting a finger. His finger had to be partially amputated.",0
"An employee was going to install concrete forms on the range in the air force base. While he was putting a piece of plastic into the concrete form, his right-hand middle finger was bitten by a snake. He was hospitalized overnight.",1
"On 09/14/2016, an employee was lifting one side of a sheet pile when he lost his footing and the sheet pile fell on his right leg above the ankle, breaking his lower leg. He was hospitalized.",1
An employee suffered a compound fracture to the lower right leg while training on a powered pallet jack.,1
"An employee was working from an 8-foot ladder when he lost his balance and fell onto an arcade machine, breaking multiple ribs.",1
"On or about September 14, 2016, an employee was bitten on the left bicep by a K-9 while conducting training.",1
"An employee was cutting a piece of metal on an ironworker machine when his right index finger contacted the underside of the metal piece, amputating the skin from the bottom of his finger.",0
"While walking to a home to provide services to a patient, an employee tripped on an uneven surface and fell to the ground, breaking the left patella.",1
"An employee tripped and fell down four steps to the ground, lacerating her head.",1
"An employee was picking product from the dock and moving it to the storage area using a forklift. The employee's lower left leg was then caught between a support column and the forklift, crushing and fracturing it and causing blood loss.",1
"An employee tripped on a rug and fell, suffering a possible knee fracture.",1
"An employee was sizing a 15"" piece of reinforced concrete pipe with a cut off saw when the saw kicked back, striking and lacerating the employee's upper left arm. The employee was hospitalized.",1
"On or about September 14, 2016, an employee shut down his drop ball crane and exited the cab when he heard a noise from the engine compartment. As he inspected the engine, the coolant line broke/displaced, spraying hot fluid on him. He suffered burns, requiring hospitalization.",1
"After returning to the warehouse, an employee felt overheated and began cramping due to dehydration. He was hospitalized for heat exhaustion.",1
"An employee was descending an escape trunk when he stepped onto a wood platform. The platform shifted, causing it and the employee to fall 36 feet. He suffered an arm laceration, fractured hip, and fractured foot.",1
"On or about September 14, 2016, an employee was working at the base of a shaft. At the same time, an overhead crane had hoisted a filled concrete bucket over the shaft. As the bucket crossed over the shaft, the bucket opened and spilled concrete onto the employee below. The employee suffered multiple fractures.",1
"An employee was struck by a forklift while returning to his forklift, breaking his right lower leg and ankle. He required surgery.",1
An employee was accidently shot by a resident cleaning their gun.,1
"On 9/15/16, an employee was injured and hospitalized when the employee fell off a joist and a steel beam fell on him as he landed one floor below. The employee sustained a torn kidney and liver and fractured ribs and a knee.",1
"The employee was operating a hydraulic torqueing machine, completing a torque sequence on a 16"" discharge valve. He was using both hands to pick up and position the hydraulic torqueing machine wrench head onto the bolt. The employee had been working with a coworker who was operating the remote controller of the hydraulic torque wrench head. The coworker then activated the wrench head, which was set at 2800 psi and amputated the right index fingertip of the injured employee.",0
An employee was walking alongside a skid steer that was in operation when he tripped and his left leg was caught in the skid steer track. He sustained a fractured left femur.,1
An employee was operating a string trimmer during landscaping duties when he became dizzy. He was hospitalized for dehydration.,1
"An employee was unjamming a machine when the scrap knives struck the employee's right middle finger, amputating the fingertip.",0
A worker opened a valve that allowed monoisopropylamine to enter an empty tank. Vapors from the monoisopropylamine entered the shop environment and migrated to a neighboring area where an employee had a serious reaction and experienced respiratory distress. She was hospitalized.,1
"An employee was webbing up a press when his finger was caught in the press, amputating his fingertip.",0
"An employee was attempting to disconnect electrical service at a residence when a dog attacked the employee. The employee suffered puncture wounds on the left forearm, a crushed right index fingertip (bone), and tissue and nail bed damage (pulled off bone but not completely torn).",1
"An employee was hooking a dumpster up to a truck when his thumb was caught in a pinch point, breaking his distal phalange joint.",1
An employee was removing a ball from the throat on a machine when his right index fingertip was amputated in a pinch point.,0
"An employee was re-threading a portion of the re-winder machine when his left middle finger became caught in the machine, amputating his fingertip.",0
"An employee was operating a walkie rider machine. When he hit the throttle (accelerator), the machine jumped back and pinched him against a concrete wall, fracturing and lacerating his right foot, right ankle, and chin. He was hospitalized.",1
An employee was calibrating equipment when his fingers were caught in the rollers. He sustained broken left-hand fingers and was hospitalized.,1
"An employee was beginning to install a thermocouple. He pulled out a plug and discovered it was not connected to a thermowell, but was plugged directly into the asphalt storage tank. When the plug was removed, 295 °F asphalt splashed out of the tank and onto his hands, upper chest, and neck. He received second degree, partial thickness burns.",1
"An employee was charging a rack through a produce case on the sales floor. He had the Schrader core removed from the access fitting where his hose was hooked up. Upon completion, the case went into a time-off defrost, which fills the evaporator with liquid Freon. 

When he disconnected his hose liquid Freon started to spray out of the fitting. As he tried to reconnect his hose, the Freon burned his right hand and forearm and his left hand and part of his left forearm.",1
"An employee's finger was caught in a pinch point, amputating his right middle fingertip.",1
"An employee was putting rivets on the nose of a trailer while working from a platform. The work platform is approximately 36 inches wide, 6 feet long, 36 inches off the ground, with two steps to access. He was stepping down from the platform when he lost his balance and fell backwards, breaking his legs between the ankle and knee.",1
"An employee was injured when a fork truck backed into him, pinning him against a stand-up desk and crushing his abdomen. He was hospitalized.",1
"An employee and coworkers were using machetes to cut overgrown brush and grass to create a clear path to use surveying equipment. A coworker's machete struck the left hand of the employee, amputating the employee's left index finger.",0
An employee's right index fingertip was pinched by a hydraulic cylinder and amputated while performing maintenance work on a press.,0
"Employees were erecting an I-beam 10 to 12 feet overhead when the I-beam  fell on the back of an employee below, injuring his shoulder and knee. He required surgery.",1
An employee sustained an amputation to his index finger while using a metal lathe.,1
"An employee was trying to remove a cord from a hatch when it closed on his right pinky finger, amputating the fingertip.",1
"An employee was working from a cable tray 15 feet above the ground. The employee was utilizing a fall protection harness in conjunction with a PFAS. As he tried to move from one location to another, he fell to the floor, shattering his right heel and fracturing his left ankle. His lanyard was not tied off at the time of the incident.",1
An employee was setting aluminum shoring for excavation using a hydraulic shoring machine when his finger was pinched inside the shoring. His right-hand middle fingertip was amputated.,1
"An employee was attempting to remove a molded 27.5-inch rubber part from the mold using an overhead crane and a push-out barrel. When he raised the part and the core mold with the crane, he reached up under the part to apply more 4x4 wooden blocks. The part then slipped off the core, pinning his right arm between the part and the push-out barrel. He suffered a broken arm and hand, as well as a forearm burn, and required surgery.",1
"An employee was setting up the electronic fuse on a non-lethal sting ball grenade. An electronic fuse is placed in the grenade and electrical wires are set up on the electronic fuse. The grenade went off as it was being set up for the test. The employee suffered multiple broken bones in his left hand, a laceration to the left hand, and multiple contusions to his stomach and chest.",1
"While walking through a wooded area to retrieve Frisbees for disc golf, an employee stepped on some uneven ground and rolled an ankle.  The employee sustained a broken and dislocated left ankle, requiring surgery.",1
"An employee was moving an aerial articulating boom lift when his head brushed against high-power electrical lines. He was shocked several times before falling unconscious to the basket of the lift, suffering second and third degree burns and internal injuries. He was hospitalized.",1
"An employee was using an air hose to blow off debris around the forklift radiator. He removed a forklift radiator cap and hot anti-freeze spewed out of the radiator, burning his arms and face.",1
An employee was removing left bottom roll belts from a pin at the DR machine. The end of the employee's finger was then caught between the pin and a horizontal brace on a hoist.,0
"An employee was staging pallets on an electric power jack when he lost control and ran into a rack, fracturing his foot.",1
"While loading shingles on a mobile conveyor, an employee became overheated and experienced heat stress.",1
"An employee was using an air nozzle inside a machine to blow dust off internal parts when his right hand was caught in the rotating spindle inside the machine, smashing the index, middle, and ring fingers on his right hand. The machine's guard door was removed at the time of the incident.",1
"An employee was setting up tire force testing machines and changing out rims to fit the size of the tire being tested. He was mounting the bottom portion of a rim. During the mounting, the cylinder is lifted up to ensure the machine lines up properly. The rim he was mounting was off center. When he lowered the cylinder, the rim fell on his index and middle fingers. His index finger was fractured and his middle finger sustained a deep laceration between the hand and first knuckle. His finger had to be surgically amputated.",0
"On or about September 15, 2016, an employee was driving a stand-up forklift in reverse from the back of a semi-trailer after setting down a load. A second stand-up forklift was also backing up and the two forklifts collided. The elevated forks of the second forklift struck the left foot of the employee controlling the first forklift. The employee suffered three broken toes, requiring surgical removal of the fourth toe, as well as a cut (left foot).",1
An employee fell off a ladder and fractured the T-12 vertebrae.,1
A temporary employee was cleaning out a running saw and amputated the right pinky finger.,0
An employee was using a table saw and cut the tip of his finger.,1
"An employee was walking back to his truck when he tripped and fell to the ground, suffering chest contusions and an internal injury.",1
"An employee was attempting to install a belt on a pulley system on a PVC mixer machine when his finger was caught between the pulley and the belt, amputating his pinky finger above the fingernail.",0
"On or about September 16, 2016, at 1:45 AM, an employee walked outside to speak with a driver at the gate. The employee tripped over a cinder block and fell to the ground, suffering a shattered bone between the left shoulder and elbow.",1
An employee was attaching base timber to a green house structure. The employee was drilling holes in the lumber with a power drill when the drill bit caught the aligning string. The string subsequently wrapped around the end of the employee's left middle finger and amputated the fingertip.,0
"A temporary employee was working from a 10-foot ladder and cutting ductwork from the ceiling when the ductwork fell and undercut the ladder. The employee fell and struck their head on the concrete floor, suffering severe cranial/brain injuries.",1
An employee suffered an avulsion trauma injury to the left ring finger while testing/repairing an avionics cooling fan. The fan guard was removed at the time of the incident.,1
"On September 16, 2016, an employee was attempting to remove a rock from a running conveyor belt. When the employee attempted to retrieve the rock, the conveyor grabbed his glove and pulled his arm into the drive pulley assembly. His right arm was crushed and had to be surgically amputated.",1
"On or about September 16, 2016, an employee was hospitalized after tripping over a pallet and suffering a broken hip.",1
"An employee was installing fiber cable optic in an apartment complex building. The employee stepped out to the hallway on the second floor and leaned against an unsecured railing, falling approximately 9 feet to the ground below and fracturing the pelvic bone.",1
"An employee was loading concrete forms when they collapsed and partially crushed the employee, who suffered a broken hip and leg.",1
"An employee was setting up the bagged milk production line when a clamp activated and caught his fingertip, amputating the finger tissue.",0
An employee was on a ladder cleaning out a compactor chute when he fell from the ladder and broke his leg. ,1
"An employee was caught between a utility pole and a truck, fracturing a leg.",1
"On or about 9/16/2016, an employee was performing demolition work by cutting away metal ducts when suddenly the duct fell to where the employee was on a 12-foot ladder, knocking the employee to the ground. The employee was hospitalized with fractured ribs and a tailbone.",1
"On September 16, 2016, around 6:00 p.m., an employee was moving away from an area where she had been adjusting a rail to align boxes to the box stop air cylinder when the actuating cylinder of the conveyor belt pinched her left middle finger. Her fingertip was amputated.",0
An employee was bitten by a dog while delivering a pizza. The employee was hospitalized for an infection.,1
"An employee was sorting cauliflower on a machine when it became jammed. While trying to remove the jam, the employee's glove became caught in the feed belt and the employee's left index finger came in contact with the blades, partially amputating it.",0
An employee suffered a left middle finger amputation while clearing a jam at the seed wheel of the packet filling station. The machine was not shut off and locked out at the time.,0
An employee was attempting to set up a dryer system to dry peanuts before shipment to a processing facility. The employee's right hand went through the grating of the face of the dryer and the fan blades amputated three fingers. The dryer was in operation at the time of the incident.,0
"An employee was walking on a wet cement sidewalk from the hall gate to the clinic about 50 yards away when he lost footing, fell in front of the maintenance building, and fractured his right femur.",1
An employee was ordering food at a drive-through when a client that accompanied the employee in the car became violent and attacked the employee. The incident resulted in an automobile accident in which the employee sustained an injury.,1
"An employee was replacing a motor when an asphalt plant component fell and hit the lift platform, knocking the employee to the ground. He suffered a back vertebrae injury.",1
"An employee was tightening the bolts on a billboard when the weld of the catwalk arm broke, swung down with him on it, and hit his ankle on the billboard column, fracturing his right ankle. He fell 20 feet from the catwalk and was hanging by his fall protection lanyard about 9 feet above the ground when he was rescued by his foreman. He was hospitalized.",1
"An employee was getting equipment ready to head out to the field while a second employee brought a gun to the office to have a third employee look at it.  While the two employees were looking at the gun to correct a malfunction, it went off and shot the employee preparing equipment. The employee was struck in the lower back, hitting the pelvic bone, stomach and large intestine.",1
"An employee was unloading poles and was pinned to the ground when a pole rolled off of the fork truck, suffering a right leg injury.",1
An employee was clearing a jam on an energized packaging machine and amputated the end of the right thumb.,0
"An employee was operating a stand-up forklift. While backing up, his left foot was caught between a wall and the lift, breaking his left leg.",1
"An employee was exiting a truck when he missed a step and fell to the ground. His elbow hit the ground and broke, requiring hospitalization.",1
"On September 17, 2016, while operating a chamfering machine, an employee's third left finger was amputated in the machine's point of operation. The machine's safety buttons were bypassed at the time.",0
"An employee was walking toward the prep sink in the deli area when she turned around and slipped and fell. She landed on her right leg and fractured her upper femur, requiring surgery.",1
"An employee was using a bender machine to bend 4x45x36 conduit elbows. As he went to remove an elbow from the bender, the bender's rear clamp closed, pinching and amputated fingers on his right hand.",0
"An employee was cleaning a conveyor motor chain with a rag and oil when the towel he was using to wipe off excess oil was caught in the chain, along with his hand. Two of his fingers were smashed, and his right thumb tip was partially amputated. The chain was moving and the guard was removed at the time of the incident.",0
"An employee was using a vertical belt sander to deburr a piece of metal. The metal became caught between the sanding belt and a tool rest, which pulled his thumb into the belt behind the tool rest and amputated his left thumb tip. The sander was guarded at the time.",0
An employee was walking a dog from the back kennel area to the bathing area when the dog suddenly started to run causing the employee to trip on a mat and fall. The employee was hospitalized with a broken right hip and injuries to the knee and neck.,1
"An employee was bitten by a dog while delivering mail, suffering a puncture wound to the left calf that required surgery.",1
"An employee was walking through the warehouse when he tripped on the tine of a cart dumper, falling to the ground. He was hospitalized with a fractured right hip.",1
"An employee exited the poultry building to take a water break. The employee mistakenly ingested diluted Virocid thinking it was water, suffering stomach pain and vomiting that required hospitalization.",1
"While replacing some broken parts on top of an auger, an employee slipped and fell approximately 59 inches to the concrete below, breaking four vertebrae and two ribs.",1
"An employee was removing the cutting wheel from the impact buffer when the impact buffer engaged, cutting his left index finger's tendon below the knuckle. He was hospitalized for surgery.",1
"An employee was moving a forklift mounting plate from a shelf onto a pallet. The pallet was lifted on a forklift and the mounting plates were slid from a 3.5-feet-tall shelf to the pallet. The plates have a notch in them, and while the employee was guiding the second plate onto the pallet, his right index finger was amputated at the first knuckle.",0
An employee had an allergic/asthmatic reaction to cologne/body spray and a flower on a desk. The employee was admitted to the hospital.,1
"An employee was guiding a vehicle into the bay. The coworker driving the vehicle was unfamiliar with it and accidentally hit the gas instead of the brake, pinning the employee between vehicles. The employee suffered a right leg injury.",1
An employee was flipping the mold tool on a press to strip parts when the press ram came down and crushed his left thumb.,1
"On or about September 17, 2016, an employee was stepping on the tongue of a trailer to gain access to a parade float on the trailer when the tow vehicle accelerated and the employee fell to the pavement, striking their head, left hip, and right side of the back. After the employee fell to the ground, the tow vehicle continued to move forward and the trailer's tires grazed the employee's left leg.",1
An employee was digging an excavation when the excavation collapsed on the employee. The employee suffered a broken pelvis.,1
An employee was moving items from one vehicle to another and stepped into a hole and fractured their lower leg.,1
"An employee fell to the floor while helping an inpatient get into a bed, injuring a knee and requiring hospitalization.",1
"An employee was removing a pipe, which was about 1 foot above the ground, when the pipe fell on the employee's right foot and broke toes.",1
"An employee slipped and fell on a wet floor, suffering a back injury.",1
"While installing a press mold, an employee's wrench slipped, causing the employee to fall backward to the concrete floor. The employee suffered a broken left hip.",1
"An employee was working around a chain lift hoist that held a propeller when a link in the chain failed. The employee was then pinned between the propeller and nozzle, suffering internal injuries and requiring hospitalization.",1
"An employee was attempting to reach a product further back on a shelf when she slipped and fell, fracturing her hip.",1
"An employee had a small grease fire on his equipment. As he grabbed the fire extinguisher and handed it down to a coworker, he lost his footing and fell down, fracturing his right leg beneath the knee.",1
"An employee was using a forklift to lift and empty a dumpster when he attempted to push the dumpster at the same time that the forklift tines were activated/lifted. His left pinky finger was pinched between the forklift tine and dumpster, amputating his fingertip and requiring hospitalization.",1
"While operating a hydraulic torque wrench, an employee dropped the remote, which activated the torque wrench. The wrench then struck the employee's right hand, fracturing the index finger.",1
"An employee was hanging a new drop to the mock house. She had already cut the old drop and was addressing the tap to connect the new drop to it. She shifted her weight and leaned to the left. When her weight shifted, the safety hook on the right side of her safety strap shifted and came off the D-ring. She fell approximately 18 feet from the ladder and landed on her right side, fracturing both arms.",1
"An employee was removing clevises from under a blowout preventer (BOP). The employee retrieved the first clevis, but the second clevis was trapped underneath one of the BOPs. He lifted the BOP up and stuck the first clevis underneath to support the BOP's weight (this allowed him to retrieve the second clevis). When he attempted to lift the BOP back up to remove the first clevis, the BOP slipped and fell. His right index fingertip was caught/pinched between the two BOPs, resulting in a finger amputation.",0
" An employee was struck by a vehicle while sliding trailer tandems on the side of the road, requiring hospitalization.",1
"Workers were installing a heat exchanger when it fell, striking and fracturing an employee's ankle.",1
An employee was injured while trying to clear a jam on an injection molding machine.,0
An employee was using a utility knife to cut a zip tie that was securing a reel of flexible hose when the knife lacerated his left leg.,1
"An employee was changing a light bulb on a rig unit when he fell approximately 10 feet to the ground below, breaking four ribs on his right side and suffering a lung contusion.",1
"An employee slipped while throwing debris into a dumpster, causing the employee to collide with the dumpster and suffer broken ribs upon impact.",1
An employee finished work at the end of the day  and as he was walking to his truck he began vomiting and feeling light headed possibly due to heat stress.,1
An employee was on the back of the paver operating the screed when he started to feel unwell and experienced muscle cramps. He was hospitalized for dehydration.,1
"An employee fell from a stepladder after losing his balance while performing needle gun operations, suffering a contusion and a possible fracture to the right hip.",1
"An employee was changing bags in a bag house with three coworkers when his left hand entered a rotary air mover, partially amputating three fingers.",1
"On September 19, 2016, an employee was sliding a ductwork transition across the ground and tripped over a 4-inch step. The employee fell to the ground and the flange on the ductwork amputated the employee's fingertip.",0
"A crane operator was lowering material and an employee went to remove the hook from the material when the crane moved, causing the chain to tighten and pinch the employee's right index finger between the hook and material. The employee's fingertip was amputated.",0
An employee was feeding the prefeeder when he stepped in a hole that was created by a missing roller. He suffered a swollen knee and was hospitalized.,1
"A temporary employee was running a punch press when the punch press tripped, amputating his left-hand at the wrist.",0
"An employee was driving back to the rig from the water well and ran over a rattlesnake. He got out of his vehicle and walked to the rattlesnake, which bit his right middle finger. He was hospitalized.",1
"An employee was assisting a forklift operator with loading beams when the operator drove over the employee's left foot, fracturing it.",1
An employee was inspecting a high-pressure hydraulic hose that had a pinhole leak when it injected hydraulic fluid into the employee's left middle finger.,1
"An employee was loading wood onto a stack when lumber fell off the stack and struck his right leg, fracturing his femur.",1
"On Monday, September 19, 2016, at approximately 7:25 AM, an employee was setting up a core box at the beginning of work when he passed out and fell backwards striking his head on some metal saw horses. He sustained a head injury and was hospitalized.",1
"An employee was stacking wrapped chicken tender packages when he noticed chicken tenders that had become lodged in the edge sealer of the packaging machine and attempted to remove them. At that point, the machine activated and the blade of the edge sealer impacted and amputated his right index fingertip.",0
"An employee was attempting to adjust the spacers in a machine when a coworker started it. The machine cycled, causing the employee's arm to become caught in the die boxes. The employee sustained a left arm fracture.",1
"An employee was getting ready to start the kettle motor on the tar kettle. The pipe was not hooked up yet, causing hot tar to burn his face, neck, and arms.",1
An employee experienced an acute kidney injury due to severe dehydration while servicing and testing steam valves.,1
"An employee experienced heat stress while sorting packages, requiring hospitalization.",1
"An employee was engaged in a physical emergency safety intervention with a student while leaning against a free-standing table in the classroom. The student was struggling, causing the table to slide. The employee fell backwards on the floor, suffering a cervical spine sprain.",1
"An employee was operating a drill machine and cleaning the debris around it. As the drill bit was automatically pulling out of the drilled hole, the bit caught the employee's sleeve and pulled in the employee's right forearm, lacerating it.",1
"After repairing a diesel truck, an employee climbed off the truck and stepped on the battery box. The lid on the battery box was unsecured, causing the employee to fall 2 to 3 feet onto the concrete floor below. He also struck the battery box during the fall. He fractured several vertebrae and a left rib.",1
"An employee was standing on a transloader conveyor belt. He was in a crouched position attempting to remove a vibrator from the rail car. A coworker was with him, and as he was pushing the lever to turn off the vibrator, his hand hit the lever to engage the conveyor belt. The employee was spun around and caught under the guard and belt, breaking his left leg.",1
"An employee was conducting repairs on the bender machine when his right hand was caught in the machine, amputating his index, middle, and ring fingertips.",0
"An employee was leaving a work station in a processing area and was backing up when her heel was caught on the edge of a wood pallet. She lost her balance, tripped, and fell.  While trying to catch herself with her left hand, she broke her left forearm in five places, requiring overnight hospitalization.",1
"An employee lost his footing while descending a fixed cage ladder and fell 10 feet, fracturing both ankles.",1
"An employee was on a jammed conveyor line, attempting to clear a carton jam. His foot slipped on the rollers and he rolled his right ankle, fracturing it. He was hospitalized.",1
An employee was cutting wood with a table saw when the saw amputated two fingers and damaged two others on his left hand.,1
"An employee was outside of a grain elevator watching the auger operation. When he entered the grain elevator, his left leg was caught and amputated in a running auger.",0
"An employee was repairing wooden pallets and placing the chain back on the sprocket when his left hand became stuck between the moving chain and sprocket, crushing and severely lacerating multiple fingers on his left hand.",1
"On or about September 19, 2016, an employee was installing rack systems. As he was loosening a rack from a bundle, it fell on him, dislocating his ankle and breaking his tibia.",1
"An employee was bending a piece of rebar when the employee's glove was caught between the rebar and the table, causing an amputation without bone loss.",0
"While walking down a steep slope in the woods and crossing a gully on a log, an employee fell and landed on their back, suffering a ruptured spinal column and requiring hospitalization.",1
"An employee slipped and fell from a step stool while stocking merchandise, fracturing the right knee.",1
The employee was replacing a bag on the airlock system when the motor started running. The machine's moving parts amputated the employee's right middle finger.,0
An employee felt overheated while cutting rebar with a saw from approximately 1235 to 1250 hours. He was hospitalized for heat stress.,1
An employee slipped off a ladder while removing fryer hood vents from housing and the employee's foot/ankle went into the fryer. The employee was hospitalized for burn injuries.,1
"An employee was performing maintenance and changing the belt on a chip transport pump when his left index finger was caught between the belt and pulley, amputating his fingertip below the fingernail.",0
"On September 20, 2016, at approximately 2:30 PM, an employee was coring concrete using a drill. His hair somehow became caught in the drill and he suffered damage to his scalp and broke his neck. He was hospitalized and required surgery.",1
"An employee lost his balance and fell from the loading dock, landing on and injuring a second employee standing below. The second employee suffered a broken left tibia, lower back contusions, and a concussion.",1
An employee experienced heat stress while edging a concrete sidewalk. The employee was hospitalized.,1
"An employee at a utility power pole was moving an insulator cover that was draped over a power wire. He was working from a bucket truck about 30 feet up. When the employee removed the insulator, the insulator cover failed and an arc flash occurred, causing flash burns to the employee's hands. He was hospitalized.",1
An employee was riding on the forks of a forklift. The forklift tipped over and the employee fell. The employee was then pinned under the forklift and suffered two broken legs. The employee was hospitalized.,1
"Two employees installed a new mud press belt. The employees were in the process of installing the mud wash box. In the process of removing the bolts from the bearing pillow block on the redirect roller, the remaining tension on the new belt and residual in air bag belt tensioning system pulled and twisted the redirect roller forward into the water flush line union. The force and motion of the redirect roller bearing pillow block pushed the employee's hand between the adjustable wrench (crescent wrench) and the water flush line union. The employee immediately removed his hand from the leather glove and noticed the pinky finger was smashed and suffered a partial skin amputation.",1
"While attempting to pull a tray out of an egg wash machine, an employee's fingertip was amputated by the machine's conveyor belt.",0
"An employee was at the labeler station located in the conveyor system. His hand was caught between the moving pallet and the reflector of the photo eye sensor, amputating his right index fingertip.",0
"An employee suffered heat stress while welding on a roof, requiring hospitalization.",1
"An employee fell from a baker's scaffold to the floor while blowing in insulation, suffering a broken clavicle and contusions.",1
"An employee was scanning a bundle of steel for inventory on a flatbed railcar. He was turning to step down from the railcar when he lost his footing and fell approximately 3.5 feet to the ground, injuring his shoulder.",1
An employee was squeegeeing mud when he fainted after experiencing dizziness and leg cramps due to possible dehydration.,1
"An employee was climbing a ladder for pest control inspection when the ladder kicked out at the bottom and the employee fell to the driveway, landing on the wrists and face and suffering multiple fractures.",1
"An employee was trying to troubleshoot a case sealer when his left finger was caught in the belt and pulley drive, amputating his left ring finger.",0
Two employees who were operating pallet jacks collided with each other. One employee was hospitalized overnight with back pain.,1
"While tripping pipe on a derrick, an employee's left index finger was pinched between a metal beam and a driller collar, amputating the fingertip.",0
"On or about September 20, 2016, an employee was walking behind a forklift when it backed over the employee's right foot, breaking bones and causing lacerations.",1
An employee banged her knee on a table in a classroom. The employee received a steroid shot due to an inflamed bursa. The employee had a reaction to the steroid shot. The employee was hospitalized to treat her reaction to the steroid shot.,1
"A lead person was adjusting the edge grinder. An employee walked to the back of the machine and placed his hand on the end of an adjustment rod sticking out of a pneumatic cylinder. The lead did not realize the employee's hand was on the rod, so he actuated the machine to test his adjustments. The employee's left index finger was then  pinched and amputated between the cylinder housing and the rod end stop.",1
An employee fell down 10 stairs sustaining a head injury requiring hospitalization.,1
An employee fell six feet from a ladder on a wooden deck and broke his left ankle.,1
An employee was walking off a ship when he slipped on the accommodation ladder and twisted his left leg. He was hospitalized for surgery.,1
"An employee was stung by bees while servicing a controller panel, requiring hospitalization.",1
"An employee was under the kitchen sink connecting a water line to install a dishwasher when his arm contacted a live 220-volt line, causing an electrical shock and burns to his arms.",1
"An employee went to disconnect a hose for a Q10 pump when a coworker opened a discharge valve, causing the pressurized hose to strike and fracture the employee's ankle.",1
An employee's finger was smashed between a winch line and the tailboard of the winch truck.,1
An employee was working in a field environment and stepped near a hole where a rattlesnake contacted the employee on the lower leg.,1
An employee was attempting to cut a piece of trim (wood) with a battery-powered circular saw when his index fingertip was amputated.,0
An employee broke a hand while working with a ladder.,1
An employee was trimming a bush with a hedge trimmer when the trimmer became caught up on a bush and kicked back onto the employee. He covered his face with his right hand and his index finger was fractured.,1
"An employee on a second-level platform was opening a slide gate at a height of approximately 14 feet to place a pallet on the deck. The slide gate was 4 ft H x 12 ft W on the exterior wall, attached by a sliding mechanism. The employee fell to the ground along with the gate, suffering multiple fractures to the femur, pelvis, ribs, right leg, and arm.",1
An employee was climbing onto a roof from the ladder. His foot slipped on the granules from the roof shingles and he fell 10 feet. The employee was hospitalized for a fractured L4 vertebrae and a torn ACL.,1
"An employee was working on the floor of a rig when a hinge pin became unlatched on the tubing that held the rig elevator. The tubing struck the employee, breaking the collarbone on the right side.",1
"An employee was walking away from the tank that feeds the cleaning lines with a water and caustic solution. The vent from the tank blew off and splashed the employee with the solution. The employee suffered burns on the face, back, legs, arms, and stomach.",1
"An employee was drawing and smelting a pot for casting lead when he became dehydrated and experienced nausea, weakness, and lightheadedness. He was hospitalized for heat stress/exhaustion and dehydration.",1
"While walking to the trash hopper, an employee stepped over a permanent pipe running along the ground. The employee's foot became caught on the pipe, and the employee stumbled and contacted the trash hopper support frame, breaking the left arm and requiring surgery.",1
An employee was working inside the upper level of the storage warehouse and began experiencing muscle cramps due to heat stress while changing rollers on a conveyor belt.,1
An employee was kicked in the face by a cow while milking.,1
"On September 21, 2016, around 3:30 a.m., an employee was changing out a 1,400-pound seal-in roller with a hoist when the roller rolled on to his left thumb tip. The thumb tip had to be surgically amputated.",0
"After filling up the milk tanker truck, the employee was closing the plunger valve by hand. The employee's finger was over the edge of the flange, and when the valve was sucked in it amputated the right middle fingertip.",0
"An employee began experiencing dizziness, nausea, and cramping after returning to the office from a roofing jobsite. The employee was hospitalized for heat stress.",1
"An employee lost his grip and fell 6 feet off a fixed ladder, breaking his right ankle.",1
"On September 21, 2016, an employee was hospitalized after receiving burn injuries while operating a tempering/polishing machine.",1
"An employee was carrying a bucket of hot asphalt when he tripped. The hot asphalt splashed on and burned his face, requiring hospitalization.",1
"On September 21, 2016, at approximately 7:30 a.m., an employee and two coworkers were conducting routine checks on the plating line when a piece of debris was noted riding on top of the running strip line/plating solution. The employee attempted to remove the debris from the running strip line with a 12-inch spud wrench when his right hand was pulled into the rotating plating rolls, amputating his index finger, breaking his ring finger, and causing an abrasion to his hand.",0
"An employee was bending over to pick up a 10-foot stick of 3/4"" electrical metallic tube (EMT) when he felt and heard a pop in his back and experienced a sharp lower back pain. He was hospitalized with a compressed back disc.",1
"A driver was attempting to access the dock door on a loading dock, fell off the dock, and fractured their right leg.",1
"On or about September 21, 2016, at 8:30 a.m., an employee fell while manually mopping a bathroom floor, fracturing the right leg or ankle.",1
"On September 21, 2016, an employee was on a vertical ladder checking the level of waste in a dumpster when a delivery truck struck and pinned the employee between the truck and the dumpster. The employee was hospitalized with a broken right leg, a collapsed lung and liver damage.",1
An employee was operating a pallet jack and walked to the front of the equipment to select product for an order when he stumbled and pressed the controls. The jack moved forward and caught his right ankle between the pallet jack and another one directly in front of him. He suffered multiple fractures to his ankle that required hospitalization and surgery.,1
An employee was drilling a hole through an overhead bar joist. The bit broke suddenly and the employee lost control of the hand-held drill. The unused portion of the drill bit went around his safety glasses and penetrated the eye.,1
"An employee's right thumb was caught in a chain and sprocket while removing fiber from an idler, amputating the thumb tip at the nail. The idler was not locked/tagged out at the time.",1
"An employee was standing on a ladder when he lost his balance and fell, fracturing his leg.",1
"An employee was helping to install an 8-inch water line, working approximately 4-feet, 8-inches deep, when the dirt underneath the concrete of the street gave way and hit the employee on the right-side hip/pelvis.",1
An employee fell from a roof at a jobsite and was hospitalized.,1
An employee was securing a large box to his assigned fork truck when a delivery truck driver backed his truck into the employee.,1
"While installing and uninstalling metal racks, an employee was injured by a metal band that snapped and struck him in the eye, puncturing his right pupil. Eye protection was not worn at the time.",1
"An employee slipped while inspecting the pre-chiller rocker drive. When he tried to catch himself, his right index finger was caught and amputated in a moving belt.",0
"An employee was walking between jobs when his right leg was caught between a conveyor and a paint skid, lacerating it.",1
"An employee was pushing a piece of wood through a saw blade when the wood kicked back and the employee's hand slipped forward into the blade, lacerating the right pinky finger.",1
"On September 21, 2016, around 12:45 p.m., an employee was helping to adjust the tracking of a conveyor belt when a moving part caught his glove and pulled his right hand and forearm into the belt/roller, resulting in a right arm fracture. He was hospitalized.",1
An employee was removing old power lines with another employee. The power line tilted and struck the employee's left leg.,1
An employee was changing a belt on equipment using a bar and got a finger caught between the belt and pulley amputating the fingertip.,1
An employee was operating a truck wash rack and was pinned between a parked truck and the machine resulting in broken bones.,1
"Employees were loading I-beams onto a flatbed truck with an excavator. The last beam of the load was just set and secured in place when the crew removed the rigging from the I-beam. The excavator then turned away from the truck. A piece of the rigging was unintentionally caught on a piece of the I-beam, causing the beam to slide off the truck. The I-beam hit an employee's arm and leg.",1
"An employee was operating a backhoe, shoveling milling material off the road, when the shovel became caught on a manhole road protrusion. This contact jarred the backhoe and the employee with great force, causing a liver injury where the seat belt connection contacted the employee near the right abdominal area.",1
"An employee was attempting to hook a trailer to the hitch of a customer's vehicle. The customer was backing up and hit the gas pedal while in reverse, pinning the employee between the vehicle and the trailer. The employee suffered severe leg contusions and was hospitalized overnight.",1
"An employee was performing aircraft support operations and was walking toward an air pad when he tripped on a mooring chain and fell on the concrete air pad, fracturing his left hip.",1
"An employee was standing on the floor next to a pallet jack. When the employee engaged the pallet jack throttle, the jack moved and the employee was caught between the pallet jack and the rack, suffering a broken left leg.",1
An employee was performing pre-fabrication operations for a jointing wood process when his right middle finger was crushed and partially amputated between two beams he was aligning.,1
"An employee was helping to load a barrier rail clamp onto a lowboy trailer. When the clamp was over the correct stop on the trailer, he directed the operator to lower the clamp. His left hand was resting on the clamp. As the clamp settled on the trailer, it closed enough to catch and amputate his left ring fingertip.",0
"On or about September 22, 2016, an employee was performing maintenance on a converting machine that makes corrugated boxes when the hinged door swung shut, partially amputating his right ring finger to the distal knuckle.",0
"An employee was helping a coworker empty trash carts into a dumpster. They were lifting the trash cart manually from a loading dock. The trash cart slipped and caught the employee's left middle finger between the trash cart metal frame and the trash cart, amputating the fingertip.",0
"An employee was pressure washing pipes with a steam cleaner when the steam hose became disconnected from the cleaner and whipped around, striking the employee in the leg and fracturing the tibia and fibula. The employee was hospitalized for surgery.",1
"On or about on September 22, 2016, an employee was installing compensation rope to elevator counter weights when a cinderblock brick fell down the 180' elevator hoist way and hit the employee in the head. The employee suffered a broken neck, concussion, and lacerations.",1
"An employee was standing by his service vehicle in the parking lot area when a tow truck backed up and struck him. He was pinned between his service vehicle and the vehicle being towed, breaking his pelvis and requiring surgery.",1
"An employee was operating a pultrusion flat sheet press. When the employee tried to retrieve an item in the press, his left arm was caught by the traveling puller as it attempted to return to the home position causing a crushing injury to the arm.",1
"Am employee was climbing a ladder on a tanker truck when he fell to the ground and injured his back, neck, shoulder, and head.",1
"An employee was assisting a rigger and a crane operator with guiding a furnace tube through the opening of a furnace when the employee's finger was caught between the 90-degree point of the furnace opening and a furnace tube. The right-hand index finger was partially amputated, requiring surgery.",1
"An employee was helping unload a semi truck from behind the semi. As he opened the doors of the semi, the semi backed up which startled the employee. He started feeling chest pains and went to his manager's office to explain he wasn't feeling well. The employee was hospitalized where it was determined that the employee had a minor stroke.",1
An employee was using a rubber tub to pour water out of a double hung window when the top section of the window slipped and amputated the employee's left index fingertip.,0
A temporary employee was lining up a concrete form during a changeover. His left middle finger was in a bolt hole when the concrete form slid into position and amputated his fingertip.,0
"While working on the enrobe line, an employee's left pointer finger was amputated up to the first knuckle by an agitator arm.",1
"On 9/22/2016, an employee was pulling a skid (hand jack) with product on it from a side aisle to the main aisle when he was struck by a passing forklift, injuring his right leg and requiring hospitalization.",1
"An employee stepped off a forklift onto a 4x4 wood block used for spacing trusses, which rolled his ankle and cracked the base of the tibia on his right foot. He was hospitalized for surgery.",1
"While at the truck washing station, an employee was pinned between a mobile truck and a parked vehicle, breaking pelvic bones.",1
"An employee collapsed, hit their head on the ground, and lost consciousness. The employee was hospitalized with a head injury.",1
"The employee was in the process of changing a tire on a trailer on a highway. One of the jacks slipped off from under the trailer, causing the tire assembly to drop and strike the employee's right leg.",1
"An employee in an aerial lift was installing overhead solar panels on a new steel structure when he was crushed between the rail of the aerial lift basket and the steel I-beam he was working on. He suffered a crushed sternum and broken ribs, requiring hospitalization.",1
"An employee was installing a vapor barrier to the outside of a new home while working from an extension ladder when he lost his balance and fell 6 to 8 feet to the ground, breaking his pelvis.",1
"An employee was performing a vacuum procedure on a bulk 30,000-gallon propane tank. He was using an air compressor to blow air into the base of the container to create a tornado effect that subsequently vacuums the propane from the tank. 
A tool ignition source ignited the flammable gas, burning legs and face of the employee, who was 18 to 36 feet away from the opening.",1
"An employee walked to the rear of a trailer that was loaded with steel purlins. He began removing straps from the stored purlins and turned around, making contact with the edge of a purlin, which lacerated his right eye.",1
"An employee entered a basket/cage that was on a forklift to secure a load to a trailer. The forklift operator lifted the employee in the basket to the top of the load. The basket became hung up on the load, so the forklift operator backed up the forklift, which caused the employee and the basket to drop to the ground. The employee suffered a fractured face, requiring stitches, and a fractured right wrist.",1
An employee was disconnecting a dolly from a trailer when the dolly kicked up and smashed the employee's right thumb.,0
"An employee was unloading utility poles from a trailer using a self-unloading boom. As the employee swung the pole to the left, the pole slipped out of the grapple and struck the employee's right hip area, fracturing it.",1
"An employee slipped and fell while walking in the call center. The employee landed on her right knee, fracturing it.",1
"An employee on stilts slipped on plastic while installing insulation in a building and fell, tearing a knee tendon and requiring hospitalization.",1
"Employees were cleaning a tank of Green Liquor with a fire hose. They started from outside the tank and were washing the chemicals toward the drain with a high volume of water. The Green Liquor was around the drain when two of the employees entered the tank. They were wearing chemical protective suits with knee high boots that were taped around the top. As the employees moved toward the drain, the Green Liquor flowed around behind them and rose above their boots. The Green Liquor seeped through the tape and burned the employees' legs. One employee did not require medical treatment. The second employee was hospitalized.",1
"An employee tripped and fell to the ground while walking to the building, breaking her right arm.",1
"An employee was hauling sand in a dump truck. He dumped the truck load of sand and was attempting to close the tailgate on the back of the truck. The tailgate failed to close completely. The employee attempted to pull the tailgate away from the vehicle to create momentum from the swing to close it. His hand was positioned on the bottom of the tailgate and as it swung toward the truck, it created a pinch point. His left hand was pinched between the tailgate and the vehicle frame, causing fractures, cuts, and bruising to the fingers.",1
"An employee was pumping oil into a production line via a hot oil truck. Oil began to spray out of the pipe and ignited the burner. The ensuing fire engulfed the employee's upper body and he received third degree burns, requiring hospitalization and surgery. PPE was not worn at the time of the incident.",1
"An employee was helping a coworker transport a box sofa to a customer's car with a four-wheel dolly when he tripped on the dolly wheel and fell to the parking lot surface. He injured the left side of his body and suffered a bulging lumbar disc, requiring hospitalization.",1
"An employee was picking plastic parts off a machine. When he attempted to dislodge a part that was caught in the machine, the machine blade amputated his left middle finger and lacerated his left index and ring fingers. The guard was in place at the time.",0
"On September 22, 2016, an employee was standing on the stairs next to a forklift that was prying solidified metal off a metal casting. The forklift freed the metal and it struck the employee in the chest and face, causing the employee to fall 4 or 5 feet backwards over a guardrail. The employee was hospitalized.",1
"An employee was diagnosing equipment that was malfunctioning. He opened an access panel as part of the diagnostic procedure. When he opened the compartment, chemical was released and sprayed into his face, upper body, chest, shoulder area, and back, causing second and third degree chemical burns.",1
"On September 22, 2016, around 12:45 p.m., an employee had an angle grinder under his arm. The grinder was already switched to the ""on"" setting when he plugged it in, and it severely lacerated his arm. He was hospitalized and required surgery.",1
An employee was climbing down a ladder from a stage and fell fracturing the tibia.,1
"On September 23, 2016, while walking to the restroom, an employee tripped on a guardrail bolt and fell to the ground, fracturing the hip.",1
"On September 23, 2016, an employee slipped and landed on the ground while climbing out of the bed of a service pickup truck, suffering a hip fracture.",1
"An employee was struck in the head and feet by a wooden box that fell from a stack that was being lifted by a powered industrial truck. The employee suffered fractures to the left heel and right ankle, as well as being partially scalped.",1
An employee was using a coin press when it crushed and amputated her middle fingertip. The press guard was in place at the time.,0
An employee was maintaining an irrigation system and fainted due to heat-related illness.,1
"An employee at a poppet machine had just finished putting a box together, but the box was not spinning correctly. When she opened the interlocked door to balance the box, the chuck pulled in her right glove and then twisted her right index finger, partially amputating it.",1
An employee was attempting to reach a box of bagels standing on the top of a 2-foot step ladder. The employee fell and fractured the left tibia.,1
"On September 23, 2016, an employee was installing a fire sprinkling system in the attic of an office building when a 110-volt wire hanging down touched his shoulder and shocked him. He was hospitalized.",1
"While an employee was exiting a trailer, the dock plate unexpectedly dropped, hitting and breaking the employee's right leg.",1
"An employee fell 20 to 25 feet while installing decking on the third level of a building, requiring hospitalization.",1
"An employee was cleaning off a container when he tripped over an air hose in the dust containment room. He fell and hit his head on a rail, requiring hospitalization for two broken ribs, a back injury, and a cut above his left eye.",1
"An employee bent over to lift up a handle to raise a dolly. When he came back up, he felt a pop in his back. He was hospitalized for a herniated disc in his back.",1
"While moving material out of the way of a boom lift, an employee's left foot was caught between the boom lift tire and the floor, breaking four bones.",1
"On September 23, 2016, an employee was shocked when the boom of a concrete pump truck he was operating came in contact with energized electrical lines. He suffered first and second degree burns to his arms.",1
An employee was greasing the rollers of the concrete mixing truck when his glove was caught in the pinch point of the moving drum and his fingers were crushed. His right fifth digit was amputated at the first knuckle.,0
An employee was attempting to clear a jam on a food packaging machine when his left ring fingertip was amputated.,0
An employee was loading tools into the trailer when he was bitten by an insect. He was later hospitalized when he had an adverse reaction to the bite.,1
"As an employee exited the heat treat building, his right foot slipped on the edge of the curb/step and he fell. He fractured his tibia and was hospitalized.",1
"An employee was removing material in the bed of a dump truck. While using the access ladder to descend from the dump truck, the employee fell approximately 5 feet, fracturing both wrists and one vertebra. The employee required surgery.",1
"An employee fell from a ladder and struck the ground while painting/staining a log cabin, requiring hospitalization.",1
"An employee's coworker was sawing 1-inch hind shanks, while the employee pulled the product and bagged it after it was cut. A piece of fat was pulled into the saw. When the employee attempted to remove it, her left index finger was amputated just above the second knuckle.",1
An employee was pushing a wood block along a wood shaper when the blade cut his left forefinger.,0
"An employee grinded a steel pipe that was approximately 24"" in diameter x 40' long. An excavator machine with a nylon strap then raised the pipe. One end of the strap was connected to the excavator machine and the other end of the strap was around the pipe. During the pipe raising, one end of the pipe came free and struck the employee's left leg, breaking it below the knee.",1
"An employee was core drilling holes into a set of concrete exterior steps to make sleeves for the handrail. The drill bit became hung up, making the core drill twist and throwing the employee off balance. He fell off the side of the steps and landed on a concrete sidewalk, breaking his left wrist and landing on the side of his head.",1
"On or about September 23, 2016, an employee received an electrical shock from a light circuit while working on an elevator car top box.",1
An employee was trying to unjam the slide gate on a conveyor when the slide gate contacted and amputated his left middle fingertip. The device was not locked out at the time.,0
"An employee slipped on water that was spilled on the floor and fell, shattering her kneecap.",1
"An employee was operating the T-nut machine. She put a piece of stock in the machine and was going to install a T-nut into the end of the stock. She activated the machine for the T-nut installation, but the T-nut did not go into the stock properly. As she attempted to remove the T-nut from between the stock and the ram, her hand hit the limit switch. The ram then plunged forward, pinching her right middle finger between the ram and stock. Her fingertip was amputated. The guard was in place at the time.",0
"An employee was working with a coworker to clear some scrap paper that was blocking a sensor on the baler and preventing the baler door from closing. The door could only be raised or lowered using the manual controls. While the employee was clearing the scrap paper from the sensor, his coworker activated the controls to lower the door. The door closed on his left hand, causing multiple metacarpal fractures and lacerations.",1
An employee was stepping off of a shuttle bus and onto the curb. The employee tripped and fell breaking his arm.,1
"An employee was unloading a manual lift from a truck when the lift tilted and fell on top of the employee, breaking the left leg.",1
"While performing regular maintenance, an employee was bitten by a brown recluse spider.",1
"An employee was cutting a whole piece of loin into steaks when the bone of the loin caught the saw blade and drew the employee's left index finger into the blade, amputating it.",0
"An employee was operating the lights for the work area when a drunk driver drove into the work zone, causing an object to strike the employee and ricochet him into a nearby box truck. He was hospitalized with two broken legs, a broken hip, broken ribs, and a concussion.",1
An employee was entering a restroom when someone came out and hit her with the door. She fell and fractured her shoulder and cheekbone.,1
"An employee slipped and fell down the stairs, fracturing the right arm.",1
"An employee's arm was caught in a construction hoist's counterweight, requiring hospitalization.",1
An employee was washing windows on a hospital overpass when he was struck by a pick-up truck travelling approximately 55 mph.,1
"An employee tripped over a speed bump in the parking lot and hit her face on the pavement, seriously injuring her face, nose, and arms.",1
"An employee was decontaminating or sanitizing the chiller area with a hose when a sprocket hit his hand, requiring hospitalization.",1
"An employee was attempting to straighten up a board on the conveyor. As he was attempting to pull the board, his left-hand index finger was caught in the chain and sprocket. He was hospitalized overnight, and his fingertip was amputated.",1
"An employee was driving a golf cart through a gate and used her left arm to push the gate open. Her arm became caught between the golf cart bar and the gate, breaking it.",1
"An employee was underneath the trailer tongue frame of a portable abrasive blasting unit, attempting to straighten a bent pin in the jack stand with a crowbar. As he pried on the pin with the crow bar, the jack fell, pinning him beneath the trailer tongue frame. He punctured his lung and broke five ribs, his sternum, and his left shoulder blade, requiring hospitalization.",1
"On Saturday, September 24, 2016, an employee was using a demo saw (wood saw) to cut wood when the saw kick backed and cut his left arm. He was hospitalized overnight.",1
"An employee was operating a loader to backfill a trench with sand when the loader turned over and slid into the open trench. The employee's leg contacted the control console of the loader, breaking the fibula and requiring hospitalization.",1
An employee was loading refrigerated trailers and pulled down on a refrigerator door. The employee felt chest pains and initially believed he was having a heart attack. The employee was admitted to the hospital where it was later diagnosed to be a strain on his sternum.,1
An employee was walking with a paint booth blasting gun in his hand and tripped over the hose. The blasting gun caused a deep laceration to the employee's left thigh.,1
"While descending a step ladder, an employee missed a step and fell, suffering a left ankle injury.",1
"An employee was operating a powered industrial truck when he lost control of the vehicle and jumped from it. The truck severed his lower left leg, which had to be surgically amputated.",1
"On or about September 24, 2016, an employee slipped on a grease spill between the grill line and drink station and suffered a possible broken hip, requiring hospitalization.",1
"An employee was troubleshooting an operational problem with a bander when she tripped on a box on the floor and fell. Her hand then entered a moving timing chain and sprocket assembly, partially amputating her right middle fingertip. The machine was energized and the guard was removed at the time.",1
"On or about 9/25/2016, an employee was cutting a squash with a manual vegetable slicer when the slicer amputated part of his nail and his right middle fingertip.",0
"An employee was assisting a coworker with carts. While stepping away, the employee tripped over the coworker's foot and fell on the left side, breaking the left arm and hip.",1
"On September 25, 2016, at 5:00 p.m., an employee was unpacking printer equipment when the corner of the box scraped his right leg just below the knee. He was hospitalized for a possible infection.",1
An employee bent over to pick up a tourniquet and felt a pop in her back and sharp pain down her left leg.,1
An employee was going down the stairs when he fell and was found at the bottom floor. He was hospitalized with a hip injury.,1
"While trying to release a jammed piece of tin from a conveyor belt, the employee's foot slipped off the paddle of the conveyor belt and his foot became stuck. When the employee attempted to jerk his foot out, the result was a de-gloving injury to the right foot.",1
"An employee fell off a ladder while running network cable for computers, breaking a tibia and requiring surgery.",1
"An employee was installing a cover for a wastewater treatment pond. When the employee initiated the welder, a fire occurred, burning the employee's arms and face.",1
"An employee was mudding sheetrock from a scaffold when it collapsed, causing the employee to fall 10 to 12 feet. He injured his foot and broke his ankle, requiring hospitalization.",1
"An employee was installing a metal cage in parts storage. The cage had a sliding door, which closed on and amputated the employee's left index fingertip.",0
"While taking a sample, an employee suffered a heat burn to the back and shoulder.",1
"An employee was cleaning a moving printer roller with a paint scraper while holding a rag in his left hand. The rag became caught inside the printer roller and anilox roller gears, pulling his left hand in and causing an amputation.",1
"An employee was struck by the fork of a forklift, fracturing and lacerating his right leg (calf).",1
"The employee was assigned to perform housekeeping of the shielding/work platform and clean the deck panels and grinders. At the start of the shift, the employee was walking and stepped on a conduit pipe causing him to roll his ankle.",1
"On September 26, 2016, at approximately 5:30 AM, an employee fell while walking onto the patio, suffering a fractured hip and wrist.",1
"An employee was standing in front of a pallet of product to place it in the bin when a coworker on a turret truck ran into the pallet, jolting the employee's foot between the pallet slats. He suffered a broken right ankle.",1
"An employee was operating a riding mower on the golf course to mow the lawn. He was on a hillside when he lost traction on wet grass, causing the mower to slide down the hill towards a tree. He put his right hand up to protect his head and kept his left hand on the steering wheel. At impact, the steering wheel turned quickly, injuring his left hand. He suffered a thumb amputation and four broken fingers.",1
"An employee was loosening bolts on an axle when it swung down and pinched the employee's finger between the axle and fixture, amputating the right pinky fingertip to the first knuckle.",0
An employee was cutting wood with a notching machine when the machine's saw blade amputated the employee's left middle finger.,0
An employee was attempting to stuff cardboard back into the chamber of a horizontal baler when it crushed her right hand.,1
An employee was removing grass from jammed mower blades when the blades partially amputated the left pointer finger.,1
"While cutting a truss, an employee fell from a second-story roof and sustained a hip fracture.",1
"While installing metal ducting, an employee's finger made contact with fan blades, amputating the fingertip.",0
"While attempting to change the railroad track direction, an employee's left thumb was caught and amputated between tracks.",0
An employee was cleaning the starch feeder hopper when his right index fingertip was amputated by the 2-inch auger at the bottom.,0
"An employee was operating a pendant crane to move a bundle of 20 sinker bars onto a stack that was eight levels high. As he was unstrapping the hook from the bundle, a banding from another bundle beneath had become undone, causing the bundle of rods to collapse. He was caught in the fallen bundle of rods, causing multiple fractures to both legs. He was hospitalized and had surgery.",1
"An employee fell approximately 6 feet from a steel rack to the ground below, fracturing a wrist and arm.",1
"An employee was removing items such as boxes from a shelving rack. While attempting to retrieve an item, he fell 7 feet to the floor, breaking both wrists and fracturing his skull.",1
"An employee tripped over an extension cord and struck her head on a stretcher, suffering a concussion.",1
"An employee was stepping off a side loader when the machine struck him, fracturing his sternum and ribs. He was hospitalized.",1
An employee was performing telecommunications work from a ladder and fell breaking ribs and suffering a collapsed lung.,1
"An employee was using a donation cart to transport donated goods. When he made a turn with the cart, his left foot was caught between the cart and a parking lot block. He fell on his left side, breaking his hip and requiring surgery.",1
"An employee was performing a manual adjustment to the shaft of the tufting machine when the belt pulled his right hand into the machine, amputating three fingers.",1
An employee was walking with a tagline for a forklift carrying an 8' by 13' steel sheet when he tripped and the forklift operator rolled over his right foot. He was hospitalized with tissue damage.,1
"An employee was cutting a masonry block when the saw bounced off the block, kicked back, and cut his collarbone.",1
"An employee was installing a dryer felt when the pipe slid off the end of the forks and struck the employee, knocking her to the floor. She suffered injuries to her right fingers and the left side of her body.",1
An employee was putting a metal piece into the die area of the stamping machine when the machine cycled and crushed her left hand. The press guard was in place at the time.,1
"On September 27, 2016, an employee was unhooking the safety chain from the hauling trailer when the truck driver started to pull ahead. The employee's right-hand middle finger was pinched and amputated between the safety chain and the trailer's hitch.",1
"An employee was helping to unload a 200-pound flare stack from a gooseneck trailer when the stack shifted and fell, striking the employee in the right shoulder and lower back area.",1
"An employee was using a miter saw to cut picture frames. While the employee was making a cut, the saw came down and lacerated the employee's right-hand index and middle fingers.",1
An employee was dressing a wash pipe when the chain came loose and broke the employee's leg.,1
An employee was cleaning a pipe and removing debris that blocked the air hole. The release of pressure lacerated and broke the employee's right index finger.,1
"On September 27, 2016, an employee was using a forklift to load products on a truck. He either fell off the forklift or the truck and suffered a head injury, requiring hospitalization.",1
"On 9/27/2016, at approximately 3:44 p.m., an employee was performing foundation concrete forming work when he was struck by lightning and suffered burns, requiring hospitalization.",1
"An employee was unloading drywall from a forklift. The weight of the drywall caused the forklift to tilt as the drywall was being moved off the forks. As soon as the drywall was fully removed from the forks, the truck tilted back in place and injured the employee, who suffered major swelling of the neck/spine and required hospitalization.",1
An employee was in the cooler taking boxes of chicken off a conveyor when his glove and right ring fingertip were caught in a knuckle chain on the conveyor. The first distal segment of the employee's ring finger was damaged and had to be amputated.,0
"While performing dozer operations in a skid loader/grader, the employee was placing top soil dirt into a beach bulkhead. The skid loader/grader backed off the bulkhead and fell 3 feet to the ground. Broken glass from the rear window lacerated the back of his head and the safety (lap) bar caused bruising to his chest.",1
An employee slipped and fell approximately 10 feet while climbing down a ladder installed on a fixed light pole.,1
"An employee was climbing a ladder on a roll-off box that was loaded on the back of a truck. The employee missed a step and fell approximately 5 feet to the ground, fracturing the left elbow.",1
"An employee entered a robot cell through an opening used to remove sand. As the employee attempted to adjust the casting, the saw caught and cut the employee's finger. An interlocked gate was in place at the time.",1
"An employee was using a lathe and sandpaper to sand a piece of metal pipe. As he was sanding the pipe, the sandpaper wrapped around the lathe and then wrapped itself around the second and third fingers of his right hand, partially amputating them.",1
"An employee was stripping concrete forms when a form fell towards him. As he attempted to move out of the way, his back impacted a metal toolbox, fracturing his lower ribs.",1
"An employee was hoisting an elevator rail using an electric winch when it gave way, dropping the 230-pound rail onto the employee's left foot and big toe.",1
An employee was clamping pipes on the 15th floor. A pipe that was being loaded on the 23rd floor fell from a basket and struck the employee.,1
"An employee was pulling metal pipes from a bundle of six. He was breaking the metal bands that were holding the bundle together to retrieve two of the six. As he was cutting the final band, two of the metal pipes fell from the bundle and struck his right leg, breaking it.",1
"An employee had just finished cleaning up a resident's room and was exiting when she tripped and struck her head, suffering head injuries and a concussion.",1
"An employee was cleaning a mixing machine when the mixer cycled, breaking the employee's hand. The mixer was not locked out at the time.",1
"Employees building a lake deck were using a mechanical pile driver to drive piling into a lake bed. The rope broke as the hammer was being raised, and the hammer fell and struck one of the employees. The employee suffered facial trauma, a broken left shoulder, and a left arm laceration.",1
An employee installing water piping was injured after attempting to close/clamp a cracked pipeline. The employee suffered a broken femur and was hospitalized.,1
An employee was holding a 2x3-inch piece of wood and cutting it with a circular saw when the blade amputated his right index finger just below the fingernail. The saw was guarded at the time of the incident.,0
An employee was bitten by a dog on the left elbow as he was delivering mail.,1
"An employee's right foot was struck by an outrigger, injuring the big toe and second toe and requiring hospitalization.",1
An employee was moving a tree log with a remote mechanical grapple when the log came loose and rolled onto his left lower leg. He was hospitalized for a leg fracture.,1
An employee was cutting a piece of plywood on a table saw when the saw cut his right thumb above the knuckle.,1
"After climbing a ladder and stepping onto the roof, an employee fell approximately 10 feet from the roof to a concrete slab.",1
"An employee's glove was caught in a conveyor belt pulley, injuring the employee's right forearm.",1
"An employee was using a lathe to machine a part, which was approximately 6"" wide, 5"" long, and 16 pounds, when the part came out of the lathe and impacted his abdomen.",1
"On September 27, 2016, at approximately 4:45 a.m., an employee was helping to clear a dryer jam. While stepping over a steel latch support, he fell (on same level) against another steel latch support and fractured his right femur. He was hospitalized.",1
An employee was using a utility knife to scrape sealing seams on a tractor when the part he was holding slipped and the knife cut his right thumb tip. Proper PPE was not worn at the time of the incident.,0
"An employee fell from a truck bed to the pavement where the truck was parked, fracturing a femur.",1
"On the R2 Hoods machine in the warehouse, an employee caught her right index finger in the machine when trying to place a piece of cloth between the pieces of metal. The injury resulted in surgical amputation of the right index fingertip.",0
An employee was walking through the lobby of the building when she fell on the left side of her hip and broke it. She was hospitalized and had surgery.,1
"An employee slipped on water droplets on the floor and fell, breaking her left hip and right ankle.",1
"While performing routine food preparation inside a kiosk, an employee fainted due to heat stress, then suffered right forearm pain after falling.",1
"An employee was performing maintenance on the underside of an airplane wing and was standing on a pump stand. When finished, he turned and fell from the stand onto the chain guards. The chain guard broke at the attachment to the stand and the employee fell approximately 7 feet to a concrete floor. He sustained an open gash head injury, fractured ribs, and fractured vertebrae.",1
"An employee was walking to the front of the chicken house when he was hit from behind by a forklift. He suffered four fractured ribs, a fractured pelvis, a punctured lung, and a lacerated liver.",1
"An employee was riding on a trailer when it hit a bump and he fell off, breaking his ribs, sternum, and leg. He was hospitalized.",1
An employee suffered a traumatic amputation of the right distal thumb.,0
"An employee was walking around the trailer to slide trailer tandems when he tripped and fell on his right hip, fracturing the femur.",1
"An employee was struck by a powered industrial truck while walking to the shipping office, suffering a broken ankle that required surgery and hospitalization.",1
"An employee was descending a customer's folding attic entrance ladder located in the garage. When he stepped down onto the bottom section, it broke, causing him to fall to the ground. He fractured his left arm and left foot.",1
"While clearing leaves in the back parking lot, an employee tripped on a telephone line that was close to the ground, breaking her right ankle. She was hospitalized for surgery.",1
"An employee was operating a punch press, punching holes in nail plates. As she was doing this, the machine malfunctioned and a double stroke resulted. The employee attempted to free the nail plate from the machine and the ram plate came down and crushed her left hand. The employee was admitted to the hospital for surgery.",1
"An employee was preparing a tanker truck to be loaded with caustic. While the tanker was being filled, it was discovered that a valve near the end of the tanker was not closed and was leaking caustic. The employee was attempting to close the valve on the tanker when the soles of his shoes began disintegrating from contact with caustic. He suffered chemical burns to his feet and was hospitalized.",1
An employee was hit from behind by a vehicle while using a stand-on street blower to blow a curb area. The employee's right leg was amputated up to the knee.,1
An employee was using a crane to lift and move steel tubing onto a roller bed. The chain sling slipped from the crane hook as the tubing was being lowered and the employee's left thumb was pinched between the tubing and a steel beam that was in the roller bed. The employee's thumb was amputated just below the fingernail.,0
"An employee slipped on a liquid that was present on the floor and injured his back and leg, requiring hospitalization.",1
"While working in a ditch, an employee cut a test header off a piece of steel pipe.  The test header was being lifted out of the ditch when it tipped to the side and some methanol, which had been used to clean the pipe, leaked out and onto the employee's legs. The methanol ignited and caught the employee's legs on fire. The employee was hospitalized with leg burns.",1
"An employee was operating the swing stage lift to raise it to the top of the suspension cable. As soon as the motor hit the swage, the swage split into two pieces. One end of the swing stage then dropped approximately 5 feet and the air motor struck and cut the employee's lower left leg.",1
"An employee was operating an aerial lift to torque the bolts on a connection point of the steel girder to a bridge. His head was pinched between the aerial lift control panel cover and the bottom of the steel girder above him. He suffered a laceration to his right ear and a skull fracture, requiring hospitalization.",1
"An employee fell 30 feet from the edge of an apartment complex roof while engaged in roofing work. The employee was hospitalized with a broken femur, wrist, and ribs.",1
"An employee was monitoring the production conveyor to remove defective products from production. While he was pulling a large piece of plastic off the conveyor, the piece of plastic fell into the equipment. The plastic started making a loud noise, so the employee attempted to remove it. His hand was then pulled into the equipment's wheel area. His right thumb and index finger had to be partially amputated. The guard was in place at the time.",1
"An employee was tipping a pouring cup into a mold (to mark it as bad) while his right hand was on the conveyor belt. The conveyor belt automatically moves when it's ready for the next mold. When it moved forward, his hand became caught between the mold and conveyor belt, amputating his right pinky fingertip.",0
An employee was experiencing chest pains while running electrical conduit and was taken to the hospital 09/28/2016.,1
"On September 28, 2016, an employee was hooking up large pipes in the hull of a ship when he fell in an 18-inch void between the pipes on the deck. He suffered broken ribs, a punctured lung, and a concussion.",1
"While building a tent, an employee's right index finger was caught and lacerated between a crown and a brace.",1
"An employee fainted and fell to the ground while walking down stairs from the second to the first floor, suffering an ankle sprain and multiple contusions requiring hospitalization.",1
"An employee was caulking holes on a wall while standing on a 6-foot ladder when the employee fell to the ground, breaking ribs and puncturing a lung.",1
"An employee was in the attic of a residential home setting up equipment to blow insulation into the attic. He was walking on the ceiling joist while pulling an insulation hose when he lost his balance and his foot slipped off the joist. One of his feet went through the ceiling and caused his upper torso to fall onto the joist, fracturing four ribs and bruising his chest.",1
"An employee was shoveling dirt onto a paved surface when a nearby skid steer made an abrupt backward turn and struck the employee's left leg, breaking it. The employee was hospitalized for surgery.",1
"On September 28, 2016, at 12:30 a.m., an employee had gone to his car during his break when two men approached him, pointed their guns at the employee and shot him in the face and chest. He was hospitalized.",1
"While doing preventative maintenance on a stamping press, an employee's right index finger was caught and partially amputated in the door's chain and sprocket.",0
An employee was cleaning a pump when the pump actuated and amputated the employee's left ring fingertip.,0
"While performing powerline maintenance, an employee received first, second, and third degree burns to his back and arms due to an electric arc flash.",1
An employee was taping a pipe and using a utility knife when the knife lacerated his left ring finger.,1
"An employee's foot became caught on the stairwell and she fell, suffering a bone fracture.",1
"An employee opened a hand hole on a boiler in preparation for an annual inspection. After the employee opened the hole, hot water came out and burned the employees' hands, arms, and legs.",1
An employee was digging out a trench when the trench collapsed and broke the employee's femur.,1
An employee broke one of his legs while moving furniture from a house into the moving truck.,1
"An employee was installing an auger on a digger derrick. As he slid the kelly bar down into the sleeve, the bar/sleeve amputated his fingertip.",0
"An employee was operating a band saw when her glove became trapped in the conveyor belt, which pulled her right hand under the saw blade. Her right index finger was amputated between the first and second knuckle.",1
"An employee was working on a table saw when a piece of 3x3x24"" wood kicked back, hitting his left cheekbone and cutting him above his right eye.",1
"An employee was helping a coworker change the forks on a forklift when the fork dropped on his finger. The fork crushed his right-hand middle finger, amputating the tip just above the first knuckle.",1
An employee was cleaning up after painting with a paint gun when the paint gun went off and punctured his hand with high-pressure liquid.,1
"An employee was about to make coffee on an automatic coffee machine. The water reservoir that contained hot water was not closed properly. When she tried to open it, she was splashed with hot water and suffered second degree burns.",1
An employee was maneuvering a lid for a hole in a platform in a building. The employee lost control of the lid and both the lid and the employee fell into the basement area. The employee suffered three broken ribs.,1
"An employee was struck in the face by a tool and a spreader bar while trying to open ""ears"" on a machined part.",1
"On or about September 29, 2016, an employee suffered an injury when he fell outside the office building while walking toward his truck.",1
"An employee was moving a board that was double-stacked on a chain conveyor. When he moved the top board, his right index finger was pinched by the boards or chain conveyor and his fingertip had to be surgically amputated.",0
"An employee was venting a container with water and condensation at an oil site when a vacuum truck at the site caught fire in the engine compartment or cab. While retrieving a fire extinguisher from the truck, the employee received first and second degree burns and required overnight hospitalization.",1
"An employee was on a ladder about 8-10 feet up cutting tree branches when a tree branch fell and hit the ladder, causing it to tip. The employee fell to the ground and landed on his back fracturing five ribs, the pelvis and bruising a lung.",1
"An employee was leveling a washer machine that washes bottling equipment. He placed his hands underneath the machine to remove a shim inside of it when a 6-inch by 6-inch block support cracked, causing the machine to crush and amputate the upper part of his left index finger.",0
"On or about September 29, 2016, an employee was operating a brush chipper. The employee began to dismount the chipper by grabbing the winch rope. At the same time, the winch rope control switch was activated, causing the rope to tighten around the employee's left index finger, crushing and partially amputating it.",1
"An employee was moving a conveyor into place when the wheel became caught on a gutter cover, which caused the cover to lift up. His right foot was then caught in the gutter, fracturing and dislocating it.",1
"An employee was attempting to close the door of a shipping trailer when the spring from the trailer came loose and was hanging free. As the employee attempted to replace the spring, it recoiled and caught his right thumb, amputating the tip to the first knuckle.",0
An employee severed a finger while using a stationary horizontal bandsaw to cut material. The finger had to be amputated.,1
"During rig down procedures, an employee was moving a mud tank with a tandem truck when an overhead walkway slid, hit the ground, and then struck the employee on the left knee.",1
"An employee was walking inside a trailer containing appliances for new homes when he tripped and fell onto an oven canopy hood that was stored on the floor, cutting his right wrist and severing an artery on the metal edge of the oven hood. He was hospitalized overnight and required surgery.",1
"On September 29, 2016, an employee was helping to install a torque (transmission) on a large bulldozer using chain hoists when one of the hoists gave way, allowing the transmission to come down and strike the employee's head and face. The employee suffered forehead lacerations, facial trauma, and a skull fracture.",1
"An employee was working near the edge of a loading dock when he fell to the next lower level, hitting his head and ribs upon contact with the ground. He was hospitalized for fractured ribs and a concussion.",1
"While removing a clog in a coffee bean vacuum, an employee's right index finger came into contact with rotating parts, partially amputating it.",0
"An employee was delivering mail to an industrial company site when he was struck by the swinging forks of a mini loader, breaking his left leg in two places and requiring hospitalization.",1
An employee was driving a forklift and lost control while making a turn. The forklift tipped over and the employee suffered a fractured pelvis.,1
"An employee was teaching a class when she turned to walk away from the podium and tripped. When she started to fall, she placed her right arm out to brace herself. Her arm hit the wall, fracturing her humerus and requiring surgery.",1
"On September 29, 2016, an employee was playing baseball with clients when he suffered a torn patellar tendon avulsion in his right knee, requiring hospitalization and surgery.",1
"An employee's boot became stuck between the carpet and a plastic mat under his chair, causing him to fall and fracture his hip.",1
A worker was riding a bicycle traveling between locations on a paved roadway and fell off the bicycle landing on his arms and upper body. The employee incurred a fracture with laceration to his left forearm.,1
"On September 29, 2016, at approximately 10:15 AM, an employee walking through the facility was struck by a powered industrial vehicle. The employee then fell and suffered a broken left elbow, requiring surgery and hospitalization.",1
"Workers were drilling a water well. They were removing the drill pipes from the well with a block when the block went past the block stop at the top of the rig and broke free. The block fell to the drill deck and the bails on the block struck an employee, causing him to fall 8 feet to the ground. He was also struck by slips that were dislodged by the impact of the block. He suffered four fractured vertebrae and lacerations to the head and ear.",1
"An employee was setting up a grinding machine when he heard an unusual noise coming from the machine. He turned the machine off and looked inside. Something then flew out of the belt drive area and struck him in the face. He fell backwards and struck his head on the concrete floor, lacerating his lip and head and sustaining a concussion.",1
"An employee was cleaning a hydraulic tank with a brake parts cleaning solution. The employee sprayed the cleaner on the parts to be cleaned and then dropped a mechanic's droplight to the ground. The bulb then sparked and caused the cleaning solution vapors to ignite, resulting in burns to the employee's face and neck.",1
"An employee was cleaning bag machine plates with a rag when the rag and his left hand were pulled into the machine, amputating his fingertip between a plate cylinder and impression roller. The machine was running at the time.",0
"An employee was removing debris from the rotating tables of a grinder when his right hand came in contact with the abrasive wheel, amputating three fingers.",1
"An employee and two coworkers were reverse-rolling a 110-foot roll of carpet for a scheduled carpet installation. After reverse-rolling the carpet, the team proceeded to operate the carpet machine in order to shrink-wrap it. During this process, the carpet fell off the machine and struck the injured employee in the left leg, breaking the kneecap and requiring surgery.",1
"An employee was struck by a passing forklift, fracturing the skull, ribs, and ear. The employee was hospitalized.",1
"An employee was feeding sheet metal into a hydraulic shear when four fingers were partially amputated, requiring hospitalization.",1
"An employee was unloading scissor lifts from a truck trailer ramp. As the employee was bringing a lift down the ramp, the wheel started turning sideways, which caused the lift to tip over with the employee on it. The employee suffered a back injury and was hospitalized.",1
"An employee was in a pallet trailer behind the store when he fell about 4 feet from the pallet trailer to the ground. He sustained severe head injuries, fractured ribs, a fractured eye socket, and a fractured sternum, requiring hospitalization.",1
"An employee was pulling on a strap that was around a box when the strap broke, causing him to fall to the ground and fracture his right ankle.",1
"An employee was pressure testing oil and gas equipment. As the employee was removing the tube/pipe, high-pressure air and water released and amputated the employee's left-hand digits.",1
"An employee placed a bundle of steel bar stock into a horizontal band saw when he suffered a severe laceration to the right index finger, requiring surgical amputation.",1
An employee was loading/unloading a punch press machine when she suffered a left thumb amputation. The safety guard was in place at the time.,0
"On 09/30/2016, at 7:00 PM, a shipping/receiving employee was preparing to shrink wrap a switchboard when she stepped over the shrink wrap placed between the film roll and the switchboard structure to start the turntable wrapper. While stepping over it, her right foot was caught on the film and she fell to the ground on her left side, fracturing her left hip.",1
An employee felt light-headed and suffered asthma exacerbation while walking down a recently waxed hallway. The employee was hospitalized.,1
"An employee was cutting loins with a saw when he made contact with the blade, suffering a laceration and fracture to his left thumb. He was hospitalized and required surgery.",1
"An employee tripped and fell to the floor while walking in the hallway, suffering bruising and abrasions to the face and body.",1
"While clearing out a cutting machine's path, an employee's fingertip was cut by the machine. The machine was in operation at the time.",0
"An employee was emptying trash from a trash hopper into a dumpster. As he was trying to clear cement debris inside the trash hopper (which was lifted up by a forklift), he lost his footing and fell about 6 feet from the dumpster to the concrete floor, injuring his head, clavicle, and ribs. He was hospitalized.",1
"An employee was drilling holes in a half-inch steel plate using an electromagnetic drill. As he was removing the drill bit from the last hole, a stinger caught his glove and pulled his hand toward the drill bit, amputating his left index fingertip.",1
"On September 30, 2016, at approximately 11:00 a.m., an employee was attempting to help fellow crew members fuel up machinery when he lost his balance and fell. He received minor scrapes to his face and injured his right eye. He was hospitalized for surgery.",1
"On 09/30/16, at 11:30 a.m., an employee was grinding stock on a pedestal belt sander when the stock became caught, pulling the employee's hand against the sander. The employee's left thumb was partially amputated.",0
"An employee was teaching other employees how to inventory equipment. As the employee was taking an inventory of tires, he stepped off a catwalk and fell approximately 7 feet to a concrete surface. He was hospitalized with a head contusion and laceration.",1
"An employee was replacing a light bulb, lost their balance and fell from the ladder sustaining a head injury.",1
An employee was moving a cabinet when he lost his balance and pinched his left pinky between the cabinet and the door frame. The finger had to be amputated at the first joint.,0
"On 10/01/2016, at approximately 2:30 a.m., an employee's hand was caught between a slide conveyor and the frame. He fractured his left ring finger and received lacerations to several fingers.",1
"On October 1, 2016, at approximately 2:30 p.m., an employee was going up the front porch steps of a private residence to make a sales call when he fell on the concrete porch and landed on his right elbow, fracturing his right ulna. He required surgery and was hospitalized.",1
An employee was cleaning a pie crust mixer with water when a rotating mixer blade caught his finger against the mixer housing. His left pinky and ring fingers were lacerated.,1
"An employee was installing insulation when he grabbed a truss that had a nail, puncturing his hand through his gloves. He required surgery when the wound became infected.",1
"While exiting the television trailer to take paperwork to another location, an employee slipped on wet stairs and fell to the ground, suffering pain in the left shoulder, left hip, and lower back.",1
An employee was helping a coworker position a patient when the patient lost consciousness and fell on the employee. She sustained a back injury and was hospitalized.,1
"An employee was using a chef's knife to cut steak when the knife cut her thumb, amputating the tip.",0
"An employee was fixing a freezer door from a ladder when the door opened and struck the ladder, causing the employee to fall 12 feet onto the concrete floor. The employee suffered a concussion and fractured legs, ribs, shoulders, and nose.",1
An employee was cutting a 24-inch cast iron pipe with a saw when the saw kicked back and severely lacerated the left side of his neck.,1
"An employee tried to prevent a client from leaving a residential unit. The client went through a door leading into a stairwell.  Staff continued to try to de-escalate and stop the client from leaving the unit. The client pushed the employee, who fell down the stairs and suffered a concussion. The employee was hospitalized.",1
"An employee was working from a ladder, installing a communications drop. The ladder slipped laterally, and the employee fell and impacted the ground, suffering a fractured right wrist that required hospitalization.",1
The employee was a passenger in a golf cart performing ranger duties when he fell off the cart and hit his head on the parking lot.,1
"An employee was making an adjustment to the stretch-wrap machine when his finger was caught between the drive wheel and the machine frame, severely lacerating his left first fingertip.",1
"An employee was delivering mail to a resident's home when a dog attacked him, causing an amputation injury to his left index finger.",0
An employee was on an 8-foot step ladder performing maintenance tasks when he fell off the ladder to the platform below and rolled down 21 feet into an unguarded pit. He broke his left arm and leg.,1
"An employee was positioned over the cab of a catering truck, trying to loosen a service platform that was stuck over the cab. When he pried the platform loose, it fell on his head and fractured his face, requiring hospitalization.",1
An employee was struck in the face and suffered a broken jaw during an altercation with a coworker.,1
The employee was opening a valve. The free end of a connected hose struck the employee when he opened the valve injuring his lower left leg.,1
An employee was working on a unit with piping when he became overheated. He was later hospitalized for dehydration.,1
An employee ruptured his right patellar tendon while he was playing basketball for a scene.,1
An employee was taking inventory inside a 48-foot tractor trailer. She had one foot inside the trailer and one foot on the power dock plate when a truck jockey hooked up to the trailer in error and pulled away.  This action caused the employee to fall 4 feet off the back of the trailer. She landed on her feet and sustained bi-lateral heel fractures.,1
"An employee was on an 8-foot ladder installing electrical materials overhead. The employee missed a step while descending the ladder and fell approximately 4 feet to the ground below, resulting in hospitalization for a right ankle fracture.",1
"Employees were using an overhead crane to lift steel plates from the bed of a truck.  An employee attempted to attach chains to offload the steel plates from the truck. As he was lowering the steel plate onto the floor, the plate began to move. His right hand was on the plate and his middle finger was caught between the lip of the plate and the hook, amputating his fingertip.",0
"An employee was trying to free a planet car from a temporary guardrail. When the car became free, the employee's right thumb was amputated below the nailbed.",0
"An employee was removing a scaffold runner when it came loose and struck him. He fell backwards and struck his head, suffering a contusion/laceration.",1
"An employee was moving a table with a glass top. When she picked up the table, she leaned it toward her and the glass fell off the top of the table and onto her big toe, amputating the tip.",1
"An employee was struck by a truck while flagging in a work zone, breaking an arm and leg.",1
"An employee stood up and fell to the floor, suffering a severed femoral artery.",1
"An employee was standing on a step stool (22 inches) and arranging boxes in a supply closet. As she finished up, she lost her balance and fell to the ground. She landed hard on the ground on her right side with her right arm extended, breaking it in three places.",1
"An employee fell to the ground while coming down a ladder, fracturing his right wrist.",1
"An employee was working on a highway, pouring concrete on a part of the road, when a car sped into the construction zone. The car hit a wood plank, which ejected toward the employee, striking him in the face and causing major swelling and bruising. He was hospitalized.",1
"A worker was moving a piece of material with an excavator when it struck an employee's calf, causing a lateral laceration that required hospitalization and surgery.",1
"An employee was cutting pork on a band saw when the pork bone caught the blade and began to spin, causing the employee's left ring finger to strike the saw. He suffered a tendon laceration and was hospitalized for surgery.",1
"An employee fell approximately 9 feet through a working surface to the concrete below, sustaining fractures to the skull, ribs, and wrist and requiring hospitalization.",1
"An employee was recording the serial numbers located on the side of wooden crates containing parts. One or more of the wooden crates fell on the employee, breaking the employee's ankle and hip.",1
"An employee was relocating a light switch on a wall when he was shocked by a hot wire on the light switch, suffering burns on his right hand.",1
"While unpacking boxes of newly received fabric, an employee tripped and fell on a packaging strap, fracturing the left hip and requiring surgery.",1
"An employee was lifting a 12' x 8"" diameter steel vent pipe with three coworkers. They were using a come-along/chain fall to lift the pipe in place while the other employees were guiding. The pipe was shifted to maneuver around a guard rail, causing the rigging beam to slide off the I-beams it was placed on. The entire rigging assembly and load fell. As the rigging fell, the chain whipped around and struck the employee in the right arm, fracturing the ulna and radius.",1
An employee was near the roll-bending machine while the machine operator was feeding metal into the roller. The employee's index and middle fingers were then caught and amputated in the roller.,0
"An employee was operating a power saw from his knees and was cutting a pallet to discard. The power saw kicked back and part of the blade cut the employee's right leg above the knee, causing a deep laceration. He was hospitalized for surgery.",1
"An employee was loading a dye header (a piece of carpet) into a sample beck. When she tried to pull the head end of the dye header from underneath the reel, the carpet pulled her arm between the reel and the carpet, breaking two bones in her left forearm.",1
"While loading items into the cab of a delivery truck, an employee came in contact with liquid disinfectant cleaner, suffering chemical burns to both hands and the nose, as well as whitening of the fingertips.",1
"On October 1, 2016, a forklift operator ran over and crushed an employee's right foot.",1
An employee suffered a finger amputation while operating a milling machine.,1
An employee jumped off the 2nd floor balcony to avoid being bitten by a dog and was injured. The employee jammed the left thumb and sprained their lower back upon impact with the ground.,1
"An employee was bringing a boat to the dock when the boat tower used for water skiing came down and pinched the employee's finger, partially amputating it.",1
"An employee noticed that there was lint built up on a mounted fan. He then got a paper towel and began to wipe the lint off. His finger went between the guard, and the fan blades amputated his left index fingertip. The fan was on at the time.",0
"An employee's fingers became stuck in a construction equipment mast during inspections, requiring hospitalization.",1
"An employee was sitting in her chair at her work desk and rolled backwards to talk to a fellow co-worker when her chair tipped over, causing her to fall to the ground and strike her head. She hospitalized with a concussion.",1
"An employee was attempting to fix the gusset of a bag on a bagging machine when the machine closed on his fingers, amputating his right middle fingertip and lacerating his right index fingertip. The guard was in place at the time.",0
"An employee fell down the stairs while pulling a pallet jack, suffering fractured ribs and a lacerated spleen.",1
"An employee was pushing a materials cart with scaffolding material on it when the cart became stuck. The material dislodged and fell on the employee, striking him in the head and causing a potential concussion.",1
"An employee was trying to unjam two steel bars on a conveyor when the photo sensor sensed movement and began to cycle, causing the employee's right hand to be dragged into the conveyor. The employee suffered a fractured right hand and was hospitalized overnight. The machine was not locked out at the time.",1
An employee fell into a hole that was 18 feet deep and was hospitalized with a broken nose and cheek and jaw injuries.,1
"An employee was operating a loader to load dry fertilizer into a truck when a wall of dry (hard) fertilizer broke loose, broke the windshield of the loader, and engulfed the loader and the employee up to the middle of his chest. He suffered breathing difficulties and leg contusions, requiring hospitalization.",1
An employee was operating an ATV when it rolled and injured his left wrist.,1
"Two employees were offloading asphalt flux when one of the employee's unhooked the hose from the trailer, which caused a release of product. The asphalt flux contacted the injured employee's arms, chest, and chin.  He was hospitalized with second and third degree burns.",1
"An employee fell to a lower level while securing cargo containers on a 14-wheel flatbed truck, dislocating a shoulder.",1
An employee was stung by a wasp on his right torso and had an allergic reaction while cleaning tree limbs.,1
An employee was trying to correct loose taping on boxes that were on a moving machine when his right middle finger became caught in the machine's moving chain and was amputated.,0
An employee was driving a Segway when it hit a curb. The employee fell to the ground and broke the right ankle.,1
"An employee was inspecting a core machine because it was not operating. He attempted to clear some sand inside the point of operation. As his hand passed through a light curtain's sensing field, a core table lowered and crushed his right hand, causing lacerations and fractures.",1
"An employee was hit by a mini-excavator bucket while walking, suffering a right shoulder injury.",1
"While walking, an employee tripped on a plastic strap, fell to the ground, and fractured her right shoulder.",1
"An employee tripped over a box of coins while closing a safe door. As she fell, her right index finger was caught in the closing door, amputating her fingertip.",0
An employee was working on a dog-eared board machine when his leg was severely lacerated by a moving part at the edge of the machine near the bottom that catches the boards. He was hospitalized with a cut ligament in his right leg just below the knee and required surgery.,1
An employee was working on a shredder. He was pulling a pin with a pin puller when his finger was smashed between two pieces of metal. His finger had to be amputated.,1
"On October 4, 2016, at approximately 10:00 AM, an employee was operating a small full-revolution clutch mechanical power bench press, forming and punching recliner hardware.  The press was equipped with two palm buttons, light curtains, and two mechanical side guards. Unexpectedly, the top ram came down and pinned the employee's left hand against the bottom half of the die.  She suffered broken fingers and was hospitalized for surgery.",1
"A maintenance employee was cleaning out a pump and attempted to flick out a piece of meat. His hand became stuck, and he sustained a partial amputation of his right index finger when he pulled out his hand. The pump was not locked out at the time.",0
A maintenance employee was manually rotating a pulley to oil the bearings on an air handler when the pulley caught and amputated his left small fingertip. The power was locked out at the time.,0
"After loading a gun assembly onto the tines of a forklift, an employee tried to roll the gun assembly into a cart. The gun assembly fell off the cart and onto the employee's right foot, causing multiple fractures.",1
An employee was cutting pork loins with a meat-cutting bandsaw when his left middle fingertip contacted the rotating blade and was amputated.,0
"An employee was attempting to park a pallet jack. The pallet jack struck him as he was stepping off of it, lacerating his lower left leg.",1
An employee was cutting rolls of metal on a machine. The employee was on the stairs checking on the rollers when his right leg became caught in the roller and amputated at the ankle.,1
"On October 4, 2016, an employee was positioning a mold that was to be lifted by a gantry. The employee's hand was on one of the chains attached to the mold. When the chain was tightened, the employee's left thumb was caught and partially amputated by the chain (tissue and nail loss; no bone loss).",0
"The employee was aligning the traffic control barrels when a vehicle struck the employee. The employee sustained a broken leg, arm and a dislocated ankle.",1
"On October 4, 2016, an employee fell as he got up from his chair and fractured his hip. He was hospitalized.",1
"An employee was bitten by a spider in his truck, requiring hospitalization.",1
"On October 4, 2016, while performing maintenance on a fan, an employee's gloved hand was pulled into a belt and pulley, amputating a fingertip.",0
"While attaching a drop wire to the side of a residential building, an employee fell approximately 14 feet from an extension ladder.",1
An employee was reclaiming a liquid lye mixture from the containment area using a shop vac. The employee removed the lid to the shop vac and was attempting to pour the reclaimed potassium hydroxide mix from the shop vac into the reclamation area when he lost his grip on the shop vac and spilled the mix onto his legs.  He was not wearing PPE. He suffered a chemical burn to the lower half of his left inner thigh and left inner ankle area.,1
"An employee was welding structural steel. While descending a ladder, the employee fell to the ground and dislocated an ankle, requiring hospitalization.",1
"An employee was adjusting material on a flatbed when the material knocked the employee off the flat bed to the concrete ground. The employee suffered broken ribs, a punctured lung, and lacerations to the head and arm.",1
"An employee exited a forklift on the loading dock. The forklift was then knocked into reverse and the started going backward toward the end of the dock. The employee tried to stop the forklift from falling off the dock, but instead fell 4 feet off the dock with the forklift, suffering internal bruising on the left side of the back. The forklift was not turned off at the time of the incident.",1
"An employee was removing a hose connector from a conveyor when the hose became snagged on the conveyor. The connector came flying back, hitting and breaking the employee's hand and wrist.",1
"The employee fell approximately eight feet from a pallet/crate elevated with a forklift, while installing plywood on the windows of the warehouse in preparation for hurricane Matthew.  The employee's ankle was fractured.",1
An employee was packaging meat products and attempted to dislodge a package caught in the conveyor. The chain-driven conveyor belt then amputated the employee's fingertip.,1
"On October 5, 2016, an employee was using a 7-inch electric grinder when it kicked back and severely lacerated the back of his left hand.",1
An employee was operating a forklift. The forklift wheels struck a plate between the loading dock and the back of the trailer causing the plate to move and the employee to fall off the forklift. The employee suffered a concussion.,1
"On 10/05/2016, an employee's right calf was struck by construction equipment that backed up unexpectedly. He suffered a compression injury to his calf, requiring surgery.",1
"An employee was making cheesecake at a cheesecake press machine when the machine severely cut her thumb, requiring overnight hospitalization and surgery. The machine was guarded at the time.",1
"On Thursday, October 5, 2016, at approximately 3:15 p.m., an employee was descending from the fourth deck of a scaffold (5x16x40) after installing blinds. At the 8-feet mark, he lost three-point contact and fell to ground level, dislocating and fracturing his left elbow. His PPE was not connected at the time.",1
"On October 5, 2016, an employee suffered a left thumb tip amputation while removing a part from a bale cutter.",0
"An employee was walking up a hill while a pickup truck was backing up the hill from the other side. The driver did not see the employee. The employee attempted to get out of the way but fell and was run over by the truck. The employee suffered broken ribs, a collapsed lung, and a fractured ankle.",1
"While unloading laundry bins from the back of a delivery truck, an employee's foot was caught under the hydraulic lift at the back of the truck, amputating his toes.",1
"An employee was attempting to place a pin in the hydraulic cylinder of a backhoe when the front of the backhoe struck the employee. The employee sustained lacerations to the right forearm, three broken ribs, and a fractured pelvis.",1
"An employee was reassembling a trampoline when a bungee cord struck the employee in the eye, causing eye and vision damage that required overnight hospitalization.",1
"Two employees were on a job site inspecting the area above the roof to see where the next storefront frame was going to be installed. They set up a ladder and the first employee began climbing while the second employee held the ladder for him. 

The ladder was sitting on a deck made of composite material that was damp from rain. The first employee was over 4 feet off the ground when the bottom of the ladder began to slip away from the building. He jumped as the ladder began to fall; when he landed, he suffered a compound fracture in his right lower leg and dislocated his right shoulder. He was hospitalized.",1
"An employee was helping to move a stick pipe. He was standing on the ground by the pipe wrangler and had his left hand on the pipe. The pipe skate was too close to the pipe so he motioned to the pipe wrangler operator to move the skate back. However, the skate moverd forward, pinching the employee's left index finger between the skate and the pipe. His left index finger was partially amputated.",0
"While operating a pallet jack and driving down an aisle in the warehouse, an employee lost control of the lift and struck the left leg on adjacent metal racking, fracturing it.",1
"An employee was attempting to lift a 300-pound stone to place a lifting strap underneath it when his left index finger was caught beneath the stone, amputating his fingertip.",0
"An employee was positioning metal next to hydraulic clamps to prepare the metal for tack welding. The clamp actuated while the employee's finger was between the metal and the clamp, crushing the employee's fingertip. The fingertip had to be surgically amputated.",0
An employee was taking down cement forms when their pinky finger was smashed by rebar material.,1
"While stocking pharmaceutical items, an employee came into contact with cinnamon residue on a pallet and suffered an allergic reaction.",1
"An employee was changing a knockout on a press die when a chain came loose. The employee's left ring finger was then pinched between the die stem and the die knockout, amputating the fingertip.",0
"A maintenance employee was using a sledgehammer to drive a launder pin out when the sledgehammer struck his left pinky finger, amputating the fingertip.",0
An employee was walking by an air handler when he heard a strange mechanical noise. He walked behind the air handler to investigate and attempted to stop the machine's moving rubber belt. His right middle finger contacted the belt and was amputated above the knuckle.,0
An employee as attempting to stop the fan belt on a fan motor pulley when the pulley lacerated his right middle finger.,0
"An employee misstepped while sweeping a stairwell and fell down the stairs, fracturing the left tibia and fibula.",1
"An employee was dumping trash from a gondola style trash bin into a dumpster. The trash bin began to tip over into the dumpster and the employee grabbed it. The employee's finger was smashed between the bin and dumpster, amputating a fingertip.",0
"Two employees were collecting trash. When the first employee backed the truck up to a trash container, the second employee's right pinky finger was pinched between the truck and the container.",1
"An employee was sweeping a roof after conducting roof repair activities when he fell 20 feet through the roof to the ground, suffering shoulder and spinal injuries, pelvic fractures, and a pelvic hemorrhage.",1
"An employee was using a sanding cloth to smooth a long shaft in an engine lathe. As he got to the end of the shaft farthest away from the chuck end, his glove became caught between the sanding cloth and the shaft, wrapping his fingers on both hands within the shredding cut-resistant fibers of the gloves. He suffered one finger amputation, a broken left wrist, and right hand lacerations.",0
"An employee was walking through the property doing an inspection when she stepped in a puddle of water in the parking lot and fell, fracturing her left ankle.",1
"At about 11:00 p.m., an employee was rotating a pole to line up the strong back with the crane to hook. Two out of the six tacks were holding the strong back. The strong back came loose and dropped vertically to the floor; before it stopped moving, it struck the employee on the left side of his left leg. The strong back weighs approximately 600 lbs. The employee's leg, from the knee down to his ankle, received a glancing blow. He was taken hospitalized with several broken bones.",1
"An employee was attempting to push a pipe down the trough of a grinding machine with his foot. His foot became caught between the wall and the pipe, smashing his leg. He suffered severe contusions to the lower leg that required surgery.",1
"While installing underlayment on the roof, an employee fell to the ground and suffered a fractured pelvis.",1
An employee was coming down a ladder when he slipped and fell approximately 9 ft. injuring his left leg and arm and requiring hospitalization.,1
"An employee was pulling a ground power unit to attach it to a truck when a coworker pushed the unit, which caught and amputated the employee's left ring finger.",0
"An employee was moving a mobile food tray rack from one area of the scullery to another. The employee lost balance and fell, suffering a broken hip.",1
"On October 6, 2016, an employee was changing out cutter blades when he saw a piece of plastic. As he removed the plastic, his left hand contacted the blades, injuring his index, middle, and ring fingers and amputating his middle finger.",0
"An employee was working on a 480-volt electrical panel when an arc flash occurred, burning the employee's stomach, chest, hand, and arm.",1
"On 10/06/2016, at approximately 1:15 p.m., an employee was cleaning walls in the warehouse from a scissor lift when a material handling equipment (MHE) operator struck the scissor lift. The lift tipped over and landed on a second MHE. The employee fell to the ground and was hospitalized with acute pain due to trauma.",1
"An employee was working from a ladder to remove an aerial drop from a line as part of a U-Verse installation job. The employee slipped and fell approximately 18 feet from the ladder, suffering rib and pelvic fractures and bruised lungs. The employee was hospitalized.",1
"On 10/6/16, at approximately 2:00 p.m., an employee was operating a compound miter box saw to cut cardboard tubes. The saw kicked upward, pulling her right arm into the blade and lacerating the right bicep. The saw was guarded at the time.",1
An employee was adjusting the blade on a horizontal coating machine when the spring popped off. The employee and a coworker tried to fix the machine by holding up the blade and reattaching the spring. The spring then partially amputated the employee's finger in a pinch point.,0
"An employee's foot became caught on a barrier guard. The employee fell, dislocating a shoulder and suffering a head injury. The employee was hospitalized.",1
"An employee was struck by a cart while loading packages from another loading cart, suffering fractured ribs.",1
The employee was stacking pallets of empty barrels with a forklift. One of the barrels was not seated properly. The employee moved the barrel by hand when the forks dropped and his finger was caught between the barrel and the pallet.,1
An employee was climbing a ladder when it slid down. He fell down and broke his left leg and heel bone.,1
"An employee was moving a pallet of bags using a hand pallet jack when someone called her name. As she turned around, the hand pallet jack ran over and fractured her left foot. She was hospitalized.",1
"An employee observed a shoplifter with stolen merchandise and confronted the shoplifter as he entered his car. The shoplifter put the car in reverse with the door open and quickly backed out of the parking lot. The door struck the employee, injuring the employee's head and back.",1
"An employee was pulling a mobile cart backwards from a packing station. The cart was located between a guard rail and the wall, which had a dry erase board mounted on it with an aluminum marker storage tray located along the bottom edge. While passing the tray, the back of the employee's hand came across the edge of the tray, pulling his glove down and lacerating the back of his left hand.",1
"An employee was changing dies when a metal guard flipped down, causing the insulator on the energized 240V (die heating element) heater wires to break. The employee suffered an electrical shock to his shoulder, lost consciousness, and then collapsed forward, hitting his head on a metal track.",1
"An employee was loading a lawnmower reel into a machine when the machine centered itself, causing the positioning device to strike his left hand.",1
An employee was trying to unjam a turret machine when his right ring finger was caught and partially amputated between the turret wheel and the side of the bowl.,0
"An employee was greasing the rollers of a mixer using a rag. As he was greasing near the rollers, his right hand contacted the roller, crushing and amputating his right index finger.",0
"An employee was replacing a gear on a strapping machine conveyor. Bundles (of aluminum) continued to be put on the strapping conveyor while the employee was installing the gear. When a bundle hit the photo eye, the conveyor belt engaged and amputated the employee's right index finger below the second knuckle. The machine was not locked/tagged out at the time.",0
An employee was removing a fallen white pine tree limb with an 8-foot extendable chain saw when a limb fell onto a communication line and struck the employee. The employee suffered fractures to the scapula and ribs.,1
An employee was fabricating a piece of sheet metal on a press when the press brake came down on the employee's right hand.,1
"An employee was looking into a truck trailer while standing on the ground with his hands on the dock. A forklift then ran over his right hand and crushed the three middle fingers, requiring hospitalization.",1
"An employee collapsed and hit her head on the floor, suffering a laceration and a hemorrhage.",1
An employee sustained a right ring finger amputation.,1
An employee was attempting to cut a piece of plastic with a small utility knife when the knife slipped and lacerated the employee's left index fingertip.,1
"On 10/6/16, an employee was helping to replace a high-pressure pump that failed. He was attempting to guide the belts back on the pulley when his right index finger wrapped around the belt and slipped onto the pulley. His fingertip was caught and amputated between the belt and pulley.",0
An employee was replacing a gear box and was bitten on his wrist and forearm by a black widow spider.,1
"An employee was moving a piece of pipe on a cart when it shifted and crushed his right-hand middle and index fingers, fracturing both. The index finger above the first knuckle had to be surgically amputated.",1
An employee suffered an arm injury while operating a forklift.,1
"While pushing a basket with steel frames, an employee came in close proximity to a pole with a cage around it.  The employee's finger was caught and amputated between the pole and the basket.",1
An employee was cutting wood wedges with a skill saw on a boom lift when the saw jumped and cut the three middle fingers on his left hand. His middle finger was amputated from the bottom of the fingernail up.,0
"An employee slipped and fell down the stairs, hitting his head. He suffered a concussion, fractured left thumb, multiple facial fractures, skin tears, and a laceration to his right eye.",1
An employee fell approximately 20 feet through an unsecured hole on a parking garage roof and was hospitalized with multiple fractures to the wrists and pelvis.,1
A maintenance employee was driving a cart when it ran off the loading dock. The employee was hospitalized with head injuries.,1
"An employee was dragging tree limbs to a chipper via a winch system when his legs were struck by either the tree limbs or the winch system, resulting in one broken leg and a possible break to his other leg.",1
"On 10/6/16, an employee was performing roofing work on a bay window roof at an elevation of 18 feet when he fell to the ground, fracturing his feet and/or legs.",1
"An employee was operating the bread line, where bread comes off the cooler line onto five different baggers. The bread goes onto a slide that pushes one loaf at a time into the guarded slicers.  After it is sliced, a metal guide pushes the bread forward to the next line for the bread to be bagged. Two loaves of bread, one behind the other, went into the slicer the wrong way. When the employee attempted to grab the bread, the metal guide pinched her right pinky finger, resulting in a distal amputation of her fingertip.",1
"An employee was operating a front deck mower. As he was reversing, the mower slid. The employee grabbed the roll bar, and the right index finger was caught between the roll bar and a support beam. The employee sustained a partial amputation of the right index fingertip.",0
"An employee was putting material into a metal leveler machine when his hand was crushed by the metal rollers, breaking bones and amputating three fingers.",1
"An employee was applying a belt dressing to an aggregate conveyor when his arm was caught by the conveyor. He suffered arm and pinky finger fractures, requiring hospitalization.",1
"On October 7, 2016, an employee was operating a press brake to bend metal material when the left index fingertip became caught between the material and the front of the machine. A small portion of the finger had to be surgically amputated.",0
"An employee was walking by a pouch converting machine when she noticed a fold in the plastic and attempted to correct it. At the same time, the operator jogged the machine, which pulled her hand between two rollers and amputated her index finger and half of her pinky finger. The guard was not in place at the time.",1
"As an employee was pulling material and backing up, the employee's left lower leg struck a support bracket and was lacerated.",1
"An employee was on an upper platform of power-producing machinery checking the phase rotations on the fan motors. While descending a fixed ladder to come down from the upper platform, the employee fell off a lower rung approximately 4 feet to the floor below. The employee suffered a bruised left leg and back pain.",1
"An employee was working at a drum dump station, dumping material into a tumbler.  He was putting a 55-pound steel drum onto the dump station when the drum fell. When he tried catching the drum, his right index finger was caught between the falling drum and the next drum in line to be dumped, amputating his fingertip.",0
An employee's pinky finger pad was amputated while bending pipe.,0
"An employee's hands were pinched between two pieces of machinery while assembling equipment, resulting in a finger amputation.",0
"An employee was checking for any obstructions in the dryer when the employee's right hand became caught in the anti-clumping tumbler wheel, amputating a fingertip.",1
"On Friday, October 7, 2016, two employees were helping to decontaminate the blow down settling drum in the coker unit.  In order to remove the check valve, one employee had to hold the back up while the other loosened the check valve. As the employee began to loosen the check valve, it suddenly came off and product sprayed out of the line onto the two employees. As a result, one employee received burns to his face and hands, requiring hospitalization.",1
"An employee was attempting to help a coworker free a jammed/stuck part on a mold press machine when his finger was caught in a defective clamp, which pinched/amputated his left ring fingertip.",0
"An employee was attempting to change the bearings on a fertilizer tender truck's auger and was using a garden hose to loosen the product. The hose became tangled in the auger, which drug his hand into the auger. As a result, his right pinky and part of his ring finger were amputated. He was hospitalized.",1
"An employee was changing a die set on a metal roller form machine using a breaker bar. The breaker bar slipped off the bolt head and struck his right ring finger, resulting in an amputation.",0
An employee fell from a flat roof.,1
"While loading mail into a vehicle, an employee fell from the same level onto a concrete slab. The employee's foot twisted on the slab, which caused the employee to lose balance and fall. The employee suffered a broken left wrist and fractured left hip.",1
"An employee was checking a gap in a pipe machine when his finger was pinched between two rollers, amputating his left middle fingertip.",0
"An employee was standing on top of a stack of feed bunks, untying a bundle, when the bunks shifted and he fell off. The bunks then fell onto his leg, breaking his right femur.",1
"While walking to the break area, an employee tripped on a mat, fell to the ground, and fractured the left knee.",1
A boom section fell and struck an employee who was disassembling an 80-ton crawler. The employee suffered a fractured right leg and was hospitalized.,1
"An employee was helping to move equipment on the ground while a nearby payloader with forks was moving equipment and wooden dunnage. The forks made contact with the wood dunnage, which then struck and broke the employee's jaw.",1
"While performing sawmill operations for the pallet mill, an employee went to unjam a wood board from a saw. His left thumb was then amputated in a chain and sprocket pinch point.",0
An employee was loading counter weights into a counter weight frame during an elevator installation when the counter weights crushed his middle and ring fingers.,1
"An employee was watching bottles go down the trimmer line to make sure the blow molds were working correctly. When the employee attempted to remove a bottle, the trimmer engaged and hit the employee's hand, lacerating and crushing it. The guard was in place at the time.",1
An employee's hand was caught in a machine while working on it.,1
An employee contacted live wires and suffered burns to the hands and forearms when an electric arc flash occurred. The employee was hospitalized.,1
"An employee was trying to square a bundle of steel sheets using a 4X4 piece of wood up against an I-beam. The sheets caught the employee's left little finger, removing flesh from the knuckle to the fingertip. The fingertip had to be surgically amputated.",0
"An employee was starting a pressure washer when a plug from the block valve blew out and struck the employee in the face, fracturing the left cheek and jaw.",1
An employee suffered an amputation.,1
"An employee was lowering a folding trailer tongue with a coworker when they lost control of the towing arm. The arm caught the employee's hand, severing the right thumb and partially severing the right pinky finger.",0
"While greasing the ring on a truck drum, an employee's index and middle fingertips were caught and amputated between the rollers and the ring.",0
An employee was pushing vats of chicken in the deboning area. The employee's left thumb was caught and partially amputated between two vats.,0
An employee was using a loader to unload an airplane when the loader caught fire and burned the employee.,1
An employee was repositioning an I-beam when his right middle and ring fingers were caught and partially amputated between the moving I-beam and an adjacent stationary I-beam.,1
"An employee was emptying the grease reservoir of a deep fryer when the hot grease spilled over the edge and splashed onto her feet, causing second degree burns. She also slipped and fell, fracturing her ankle.",1
"An employee on a ladder was operating a battery-powered screw gun while sliding jam pieces of a door when a gust of wind blew the door open, thus knocking down the ladder and employee to the ground. He was hospitalized with broken ribs and multiple contusions to his left side.",1
An employee was removing a wall behind a phosphate tank while working on a plank that bridged the 8-foot-tall tank. The employee fell into the phosphate tank and suffered second and third degree burns.,1
"On October 9, 2016, an employee was loading scrap into a trailer that had an insulator sticking out of it. The trailer operator moved and the insulator struck the employee in the back near the kidney. The employee was hospitalized.",1
"On October 9, 2016, an employee was mounting a tractor when it lurched and threw him to the ground in front of a rear wheel. The tractor then struck him, and he suffered bruises and a pelvic injury that required surgery.",1
"At approximately 2:30 a.m., an employee was power washing the inside of a tanker. The employee got out of the tanker and said it smelled foul. Monitoring was done and no hazardous atmospheres were detected. The employee re-entered the tanker and approximately 10 minutes upon return he passed out. The employee was hospitalized and treated.",1
"An employee was operating a forklift when he was caught between the forklift and a machine, suffering left foot fractures that required overnight hospitalization.",1
"An employee was putting dough into the extruder machine when their right little finger was pinched, causing an avulsion.",1
"On Sunday, October 9, 2016, at approximately 6:15 AM, an employee was exiting her vehicle in the parking lot when she lost her balance and fell to the ground. She was hospitalized for a fractured hip.",1
"While getting off a salmon cage to board a barge, an employee grabbed the rope attached to a winch system.  The winch was in operation (lowering and raising a hose) and the employee's right hand was pulled into the winch, amputating the ring and middle fingers to the lower knuckles.",0
"An employee went to open the door to the gin but it was stuck. When he pulled the door forcefully, it opened and pinned his right hand between the door and the metal wall. His hand suffered an abrasion.",1
An employee's foot was run over and broken by a forklift while traversing the job site.,1
"An employee was performing maintenance work on top of a tumble blast machine. As he was either climbing or descending a fixed ladder on the machine, he fell backward and landed on the floor below. He hit his head on steel framing on his way down. He suffered a head laceration, a fractured jaw, abrasions, and a contusion.",1
"An employee was installing a panel on the loading dock when he lost his balance and fell, hitting his head on the concrete. He was hospitalized overnight.",1
"An employee was pulling electric wire when an anchor bar broke and struck the employee's left leg, breaking it.",1
"An employee was unloading a drill. The auger was still spinning. His clothing became caught on a bolt and he was caught up in the auger, suffering three fractured left ribs and bruises.",1
An employee was checking the water level in a fire system battery when an explosion occurred. The battery acid entered his eyes and pieces of the battery case lacerated his face. He was hospitalized.,1
"An employee was cutting a 2x4 with a mini circular saw when it became bound, jumped back, and ran over his left hand, amputating his thumb and severely lacerating his ring and pinky fingers.",1
An employee was unloading a truck using a pallet jack. The employee's foot was caught between the pallet he was moving and a stationary pallet resulting in a broken left ankle.,1
An employee was operating a time saver machine (which is similar to a wood planer but for metal) when he lost his balance and received a laceration from the thumb to the forearm.,1
An employee suffered a back injury after attempting to prevent a patient from falling.,1
"An employee was helping to unload pipe from a trailer. When he attempted to roll the pipe, his left knee was pinned between a pipe stake and a trailer. He pushed the pipe back and dislodged himself. He suffered a deep knee laceration, tendon damage, and a kneecap fracture.",1
An employee was unhooking a flatbed trailer from a truck. The trailer dropped abruptly and pinned the employee's hand between the truck bed and the trailer.,1
"On October 10, 2016, an employee installed an oil plug on a crowd gate lubricator. He was using a ladder to descend the crowd gate when the ladder moved. He lost his balance, started falling backward, and grabbed the machine's chain, which pulled his finger through the sprocket. The top portion of his left-hand index finger was amputated.",0
"On 10/10/16, an employee was unjamming a hydraulic shear when his left thumb was amputated.",0
An employee fell off a scooter when he attempted to pick up a piece of paper that he dropped. He fractured his right hip and/or right leg and was hospitalized.,1
"On 10/10/16, employees started a prescribed fire in a national forest to help the vegetation in the area. One employee was refueling a chainsaw to cut trees. When he uncapped the fuel tank, the hot oil boiled out of the tank and onto his right wrist, right arm, and belly, causing second and third degree burns.",1
"On October 10, 2016, an employee was securing a load of trusses on top of a trailer with binder chains when the metal banding holding the trusses together broke, causing the load to shift and knock him off the trailer. He landed flat-footed on the ground with both feet but was knocked over and pinned beneath the trusses at ground level when they landed on his right foot and ankle. He was hospitalized with lower back and foot pain.",1
The crew was checking valves in the side curb pump. The injured employee was attempting to work on the suction valve while the engine was being energized. The drive line rolled the pump and the #4 plunger stroked forward and crushed his hand.,1
"An employee's foot was caught in a transfer auger for a corn bin, requiring hospitalization.",1
An employee was stepping into a lime loader truck when his knee popped and he fell to the ground. He tore a ligament in his left knee.,1
"An employee was loading equipment onto storage racks using a hoist. The hoist's up button was activated, causing the hoist hook to jump. The employee's left pinky finger was caught in the pinch point between the hook and the equipment, amputating her finger to the first knuckle.",0
"An employee servicing a package boiler was on the forks of a forklift, attempting to move pipe. He fell approximately 8 feet off the forks and onto the concrete, suffering a head laceration (that required surgery), a broken left ring finger, three chipped vertebrae, and a potential concussion.",1
An employee slid off a roof and fell to the ground. A harness rope was not connected at the time.,1
"An employee was using a 1-ton, 460V electric chain hoist to separate the inner lid of a die from the base (part of a mold die). After removing the material, the die would only partially separate or open about 6 inches. The employee lowered the hoist by a few inches and looked into the die to identify any causes as to why it was not separating. To support himself, he placed his hand on the hoist hook. When he was ready to lift the die again, he grasped the chain and his finger went between the electric hoist hook throat opening. The epoxy seal then gave way and caused an immediate tensioning of the chain, pinching his finger between the chain and throat opening. When he pulled back, his right index fingertip was amputated.",0
"On October 10, 2016, at approximately 4:30 p.m., an employee was helping to remove a light plant generator from an excavation. A 9-foot chain was attached to telehandler forks and the light plant was lifted from the excavation and transported to a flatbed pickup truck located below a power line. While standing on the ground, the employee used his hand to guide the light plant onto the 4' high flatbed. The telehandler forks made contact with the overhead 7,200-volt line. The employee received second degree burns to his left hand, abdomen, and leg.",1
"An employee was pushing a board though a saw blade when a splinter entered his hand. His left hand then jerked and hit the turning saw blade, amputating his left thumb above the knuckle.",0
"An employee was lifting a 1,000-pound piece with a magnetic lifting device. The piece fell and struck the employee's right arm, lacerating it and requiring hospitalization.",1
"An employee was hospitalized after he was shot in the leg.  The employee was in the parking lot after getting off shift.  The gun was in his backpack that dropped on the floor, setting the gun off.",1
"An employee was removing a net from underneath an airline metal pallet (PMC) when the cargo pallet broke and fell from a forklift onto the employee's thumb, amputating it.",0
"An employee was transferring small boxes that were inside a large wooden crate that was stationed on a shelving unit about 18 feet up. The employee was using a mobile platform ladder to reach the boxes. A coworker was operating a forklift and had raised a pallet to where the employee was working. As the employee was transferring the small boxes onto the pallet, the wooden crate became dislodged from its current position on the shelving unit. When the employee attempted to straighten the wood crate, he lost his balance and fell, first hitting the pallet that was raised and then the ground below. He suffered a compression fracture and lacerations to his head, requiring hospitalization.",1
An employee was servicing a gas boiler system and was burned on the head/face due to a faulty gas valve.,1
"An employee was stepping out of the elevator when her foot was caught on the 1/2-inch rise from the elevator floor to the work floor. She tripped and fractured her left wrist, requiring surgery.",1
"On 10/11/2016 at 7:00 p.m., an employee was standing on the top level of an auto hauler trailer when he lost his balance and fell off.  There were no railings on that part of the trailer and he fell 10-11 ft. to the ground.  The employee was hospitalized with a fractured skull, fractured collar bone, 2 fractured ribs, and bleeding in the brain.",1
"An employee was standing on the floor while plumbing a line on a wall when a passing scissor lift struck the employee, breaking the employee's left fibula and left shoulder blade.",1
"An employee was changing over the nozzles on an injection molding machine. When he went to unbolt the manifold, molten plastic sprayed in his face. He sustained second degree burns to the front and right side of his face.",1
"An employee was struck by a piece of wood while operating the diagonal tooth machine, requiring arm surgery.",1
An employee fell from a 6-foot step ladder while replacing ceiling tiles and suffered a fractured wrist.,1
"While unloading trash into a dumpster during roofing activities, an employee fell approximately 15 feet onto an I-beam, breaking ribs.",1
"Employee #1 was operating a stand-up forklift with forks trailing, headed south on a dock area.
 Employee #2 was also operating a stand-up forklift with forks trailing in the direction of employee #1. Employee #1 stopped his forklift to activate a door's pull cord to enter a freezer when his forklift was struck by the forklift of employee #2. 
The back-to-back impact caused Employee #2's left foot to become caught between both forklifts, fracturing the big toe and partially amputating the fourth toe.",1
"An employee was operating a pulling unit on a rig when he tripped on a pipe, fell,  and broke his leg.",1
"An employee was hooking up airlines to his truck from the trailer. He was 3 feet off the ground when he fell from the truck to the concrete parking lot. He suffered rib injuries and a concussion, requiring hospitalization.",1
"An employee was clearing a jam on the pan washing station conveyor when the employee's left ring finger was caught between two pans, amputating the fingertip.",0
"An employee parked outside on the side of the street. When he opened his van's back door, a box fell out of the van and went into the ditch. As he attempted to get the box, he fell several feet into the ditch and broke his left tibia in his lower left leg.",1
"A slide gate closed on and severely cut an employee's left wrist, resulting in a left hand amputation.",0
"On October 10, 2016, an employee was installing and positioning a regulator on a platform. His left hand was holding the base of the regulator about 1.5 inches above the tie down when his second fingertip was pinched between the regulator and the platform. His fingertip had to be surgically amputated.",0
"While installing cable at a residential home, an employee fell approximately 16 feet off a step ladder and broke a leg.",1
"An employee was using a hydro-blaster with water when the wand ran over his foot, causing an open wound that required surgery.",1
"An employee was working on a vehicle at the hospital when his thumb was caught between the frame and the switch, amputating his thumb at the joint.",0
"An employee was conducting maintenance when a restraint failed on an air driven system, allowing a door to close on and crush the employee's hand.",1
"An employee was troubleshooting a machine. The hydraulic clamps were not functioning properly. When the employee placed his hand on the side of the heater, the clamp closed, pinching and amputating his left middle finger.",0
An employee was delivering mail when she tripped over a water hose. She fell and fractured her left and right wrist.,1
An employee suffered two fingertip amputations when they were caught in a machine's belt and pulley during an inspection. The machine was LOTO at the time.,0
"An employee and a coworker strapped an industrial site plan printer onto a forklift's long skid to take it to the second floor. The employee was on the forklift's skids when he fell 10 feet to the first floor of the warehouse, suffering lower back injuries that required hospitalization.",1
"An employee was loading a truck when a dock plate became stuck. As a coworker lifted the dock plate with a forklift, the employee pulled a pin on the plate and it fell on him, breaking his pelvis.",1
"While rigging wire, an employee slipped and fell off a truck, breaking a wrist and ribs.",1
"An employee was pumping a pipe pump and unhooked the air hose when she noticed something was still in the pump. As she attempted to wipe it out, the pump amputated the distal part of her right middle finger.",1
"An employee was installing components on an aircraft when he fell approximately 24 inches from his work platform to the ground, fracturing his right tibia.",1
"An employee suffered an allergic reaction in the store. At the hospital, she was given medication. The employee reacted badly to the medication and was hospitalized.",1
Three agents were unloading a transporter when one agent's foot was caught between the transporter and container loader when the driver pulled ahead causing several fractures in his right foot.,1
"While descending the stairs of fertilizer-applying equipment, an employee fell approximately 3 feet to the concrete surface below and struck the right side of the forehead, suffering a hematoma and brain bleed.",1
"An employee was retrieving cleaning materials from a rolling cart to detail a car when a car drove into the area, crashed into another vehicle and that vehicle struck the rolling cart. The cart then struck the employee and pushed her into a wall. She was hospitalized with broken ribs and a broken pelvis.",1
An employee was injured in a natural gas explosion.,1
"An employee was operating a tube winder when three of his right-hand fingers were caught in the main winding belt. His pointer finger was surgically amputated to the first knuckle, and his ring finger broke and required surgery.",1
An employee was changing a tire using a tire machine when it pinched/amputated his right middle fingertip without bone loss.,0
"An employee was responding to an emergency gas leak when an explosion occurred nearby. The employee suffered multiple injuries, including bone fractures.",1
"An employee was trying to remove a trash can from a certain spot. When he attempted to move a pallet jack out the way, it ran over his right foot.",1
An employee was closing a clamp that was under pressure when it slipped out of his hand and struck him below the eye on the cheek bone.,1
"An employee was emptying trash into a compactor using a 1/2-ton tilt truck. He attempted to lift and dump the tilt truck up and over the compactor's gate bar when it fell. As he grabbed the bottom stabilizer bar, it caught and partially amputated his right middle finger.",1
"While servicing a valve, an employee sent a solenoid to the valve to open it and see if the rubber seat was damaged. The solenoid coil disconnected, which interrupted the solenoid signal and caused the valve to close on the employee's thumb. The thumb had to be surgically amputated.",0
"An employee was operating a stand-up forklift when his foot was caught between the lift and a column, fracturing his left ankle and heel.",1
An employee was using a pressure washer to clean sludge in the bottom of a pit when the pressure washer's water stream penetrated the employee's boot and was injected into the top of the left foot.,1
"An employee was straightening a hose when he tripped on the screening blower line and fell down, fracturing his right hip.",1
"On October 11, at 11:00 a.m., an employee tripped while walking across the floor and suffered broken facial bones, a severe laceration to the hand, and a severe knee contusion. He was hospitalized.",1
"An employee was working from a bucket truck and cutting a branch. The bucket had a winch attached to a branch that was cut. The branch slipped and flung the employee from a height of 50 feet. The employee suffered broken bones, contusions, cuts, and scrapes.",1
"An employee was removing cabinets from a second-story apartment, which was under construction. The employee was walking onto the plywood and 2X4 box, which was being lifted by a forklift, when the box, cabinet, and employee fell approximately 10 feet to the ground. The employee suffered two broken wrists, facial fractures, and a dislocated/broken right elbow.",1
An employee was stung by a bee and had an allergic reaction.,1
"An employee was moving a mobile marination powder mixing tank. As he tumbled the tumbler, his finger was smashed between the mixing tank and the door hinge on the tumbler. He sustained a right pinky tissue amputation.",1
An employee climbed a ladder after retrieving ice/water shield and was hooking up to fall protection when ice/water shield fell. The employee and the ice/water shield went over the edge (4/5 pitch). The employee fell about 30 feet and suffered a broken arm and leg.,1
"An employee was finalizing a load for transport on a flatbed trailer. When finished, the employee used a chain to descend to the ground. The opposite end of the chain was not connected to anything and the employee fell approximately 10 feet to the ground, suffering a fractured pelvis.",1
A front end loader drove over a heavy steel plate (the panel/side of a trench box) that was lying on the ground. The contact caused the panel to strike and break an adjacent employee's leg.,1
"On 10/12/2016, an employee was squaring up steel with a sledgehammer to cut it with a saw. While he was swinging the sledgehammer, the head of the hammer missed the steel and instead smashed his right index finger between the hammer handle and the steel, lacerating and fracturing his fingertip. His fingertip had to be amputated.",1
"An employee was preparing to pour concrete for a bridge tower/column. He was descending the tower when he fell approximately 16 feet to the ground, breaking his right-side hip and ribs.",1
An employee's left hand was caught in the outfeed roller while straightening lumber on the lumber deck with a metal pole.,1
An employee closed her finger in the door when leaving the office. As a result her left index finger was broken.,1
An employee missed a step and fell from a stationary semi-truck injuring their back.,1
An employee suffered a lower back strain while lifting and placing boxes of material onto a dry wall cart.,1
"An employee was driving a yard spotting truck when the trailer containing empty bottles became unstable, leaned to the right and fell on the right side causing the truck to go up in the air. The employee fell about 8 feet from the truck's cabin to the ground resulting in a head fracture. The employee was admitted to the hospital.",1
"An employee was in a bucket truck with a jib (rope and pulley system). The employee was using the pulley system to pull up an insulator. While trying to pull up the insulator, the employee's hand was caught between the rope and the pulley resulting in a left index fingertip amputation.",0
Employees were installing an 8 inch pipeline and one employee was hospitalized as the result of a pipe failure. The employee's injuries included facial lacerations and fractures to the nose and forehead.,1
An employee was working on a loose bagasse feeder belt when his right finger come into contact with the belt resulting in amputation.,0
An employee was painting a pad transformer (6ft. x 5ft. x 6 ft.) inside the paint booth. The employee was standing on top of a roll around platform ladder when he fell approximately 6 feet to the ground below. The employee suffered a broken arm and a hairline fracture to the pelvis.,1
"On October 12, 2016, an employee was attempting to close the sidewall curtains on the north calf hutch and was hit in the neck with the crank.",1
"The employee was traveling on his PIT to put it away and plug it into to a stationary charger stored on the second tier of racking. As he approached the area to park the PIT, he noticed the charging cord hanging down from the racking. He stopped and reached to move the cord and the truck moved forward catching his fingers between the truck and the racks.",1
An employee was cleaning magnets while standing on a step ladder. The employee slipped while stepping off the ladder and fractured the left ankle.,1
"While separating bundles of steel joist, the joist became stuck and an employee used a pry bar to dislodge the joist. The employee attempted to separate the joist with his hands. The joist shifted and pinched the employee's right index finger resulting in partial amputation.",1
An employee was installing wood backers for a roof and he tripped over the backer. His left arm hit a sharp valley in the metal causing a laceration when he fell. The employee was hospitalized.,1
An employee cut a finger and was hospitalized while moving a piece of metal in a storage closet.,1
A temporary employee was operating a packaging machine and amputated the right index finger. The guard was removed at the time of the incident.,0
An employee received an electric shock with the wrench cable the employee was holding made contact with the power line.,1
An employee was working a roller line and was struck by a pipe when the roller line was started resulting in a lower leg amputation.,1
"At 6:30AM on 10/12/16, a crane truck was being setup to load a sign and the truck's outriggers were being setup to stabilize the truck. The injured employee was on the passenger back-side of the truck holding the man basket in place so that the swivel of the basket would not come in contact with tubing on the crane. As he was holding the crane basket, the back outrigger came down and crushed his right foot. Four toes were amputated at the hospital.",1
An employee was working at the selection area and his hand contacted a moving conveyor belt resulting in a laceration to the left index finger.,1
"An employee's left ring finger was amputated at the first knuckle on October 12, 2016. While the employee was loading a part on a CNC machine, his hand was caught between the casting and the clamp. The employee was not wearing gloves at the time.",0
An employee servicing a wood chipper suffered a partial am[utation of the right ring finger after going under the machine to engage the belt. The chipper was not locked out/tagged out at the time.,0
An employee suffered an amputation when a die press fell on his hand.,1
An employee was cleaning up granules that spilled onto the floor from a vent hole at the resin transfer system and amputated the left index fingertip.,0
"While rotating a motor housing on an auxiliary oil pump, an employee's left ring finger was pinched in the bolt hole resulting in the loss of left ring fingertip.",0
An employee was descending from a tree when the rope came untied from the saddle and the employee fell approximately 25-30 feet fracturing the left hip and several ribs.,1
"On October 12, 2016, an employee was hospitalized after a leg became pinned between a piece of powered equipment and a support beam.",1
An employee was attempting to remove a 1/2 inch drill bit from a battery operated drill equipped with a keyless chuck. The employee was wearing cotton rubber palm gloves and squeezing the keyless chuck to remove the bit. As he pushed the trigger increasing the torque to the keyless chuck his grip slipped and the bit caught the fingertip of his glove twisting it and his fingertip into the bit causing lacerations and a fracture to the employee's left index fingertip.,0
An employee conducted a pull test on deck tie downs. He then went to move the test unit to dislodge the hook and the swivel nut and all thread shaft shifted catching the employee's right middle fingertip between the test unit foundation and swivel nut. The fingertip was amputated.,0
An employee was attempting to secure a material basket and was struck by the basket fracturing the left thumb.,1
"A temporary employee was riding on the passenger side of a yard waste truck. When the employee got out of the truck as it approached waste cans, the right front truck tire drove over his left foot. He was hospitalized.",1
"An employee was cleaning up under the chipper. The machine was live and the belt caught his glove, pulling his arm into the belt and fracturing it.",1
"An employee was in the process of installing steel shelving for a meat locker. The employee climbed up 8-10 feet on the side of the shelving unit, lost balance and fell to the ground. The employee was hospitalized for face and mouth contusions.",1
An employee was pressing a small steel bracket against a rotating sanding wheel with his hands and fingers to smooth the edge. The bracket flew out of his hand and amputated the right index fingertip.,0
An employee was operating a backhoe to lift a pipe. He got off the backhoe to remove a plug from the pipe and the backhoe rolled and pinned the employee between the pipe and the backhoe causing a right femur fracture.,1
An employee was bitten by a pet rat that was being triaged for veterinary treatment. She was admitted to the hospital for surgery when the bite became infected.,1
An employee was moving metal material when their finger was caught between the metal and wooden cribbing. The left ring finger was amputated above the upper knuckle.,1
An employee was clearing a blockage in a pipeline and proceeded to blow the line with compressed air. There was a filter screen in the line. The lid on top of the filter screen blew off the filter striking the employee in the face. The employee was hospitalized for a fractured nose and other facial bones.,1
"On October 13, 2016, an employee was troubleshooting a squealing roller on a conveyor. The guard was removed and the employee tapped on the roller with a hammer. The roller caught the hammer and pulled his finger into it. He was transferred to the hospital where the left index finger was amputated at the first joint.",0
"Prior to a welding job, an employee was unscrewing the cap on the acetylene tank and turning on the valve to check if any fuel was left when it ignited resulting in burns to his right hand and forearm. He was admitted to the hospital.",1
Employees were cutting metal. A piece of cut metal fell and struck an employee on the back causing a laceration.,1
An employee was working behind the counter and was shot in the back.,1
An employee who had just climbed onto a roof approximately 9 feet 2 inches in height after his lunch break was in the process of securing his fall protection when he slipped and fell off the roof fracturing the left ankle.,1
An employee was resizing parts in a press machine and amputated the finger print portion of his left middle finger. Lockout/tagout controls were not in place at the time of the incident.,0
An employee was on an extension ladder working on a cable TV system. The cable broke while he was climbing and the ladder shifted. The employee fell 12 feet landing on his right leg sustaining a compression fracture just above the ankle.,1
"An employee was rigging supersized bags of etibor material. After rigging the bag, one of the top bags rolled off the stack and struck the employee who sustained a broken shoulder blade, broken right pelvic bone, and detached right ankle.",1
An employee was cleaning a moving conveyor with a spray hose. The employee stopped the conveyor to access a particular area that needed cleaning. The conveyor started back up and the employee's arm was caught in the conveyor causing a fracture and laceration.,1
Employees were picking up a piece of pipe that was about 5 inches wide and 42 inches in diameter to load it on a trailer when the pipe shifted and struck an employee on the left thigh pinning his leg between the pipe and the trailer. The employee was admitted to the hospital for surgery on his broken left tibia.,1
An employee was cleaning a jam in the cryo-vac machine and caught the left index fingertip on the propeller resulting in a fingertip amputation.,0
An employee was adjusting a fixture in a hydraulic press and amputated the right index finger behind the nail bed.,0
An employee was leaning against the truck frame in the back of the truck with his hand resting on the edge of the frame close to the truck's mud flap spring release. A student unknowingly pushed down on the spring amputating the employee's left pinky fingertip.,0
"On 10/13/2016 at approximately 5:30 am, an employee was cleaning a film tear out of a film line MDO roll section when his right hand got caught in the film line MDO roll section and was crushed.  The employee was hospitalized and the right hand was amputated the next day.",1
"An employee standing at the end of a production line reached inside a bin that contained 30-75 lbs. of rubber. A bin shifted, pinching the employee's finger between a bin and the roller. A piece of the skin on the employee's middle finger was pulled off.",1
An employee suffered the amputation of four right hand fingers after their hand was caught in the smooth mill.,0
An employee was removing debris from the panel saw and amputated the right index fingertip.,1
"On October 13, 2016, an employee received a hip and leg injury when the employee entered a 10' trenching (cave protected) to repair a main water line and a cap located on a 12' water line blew.",1
"An employee was attempting to clear a clogged fryer line. Chemical had been left in the drain line and when the hot oil hit the chemical and water, the employee was burned on the upper body.",1
"An employee was unloading dirt for a bridge construction site. The raised dump bed made contact with an overhead power line. The employee exited the dump truck, placing his feet on the ground, and was shocked resulting in electrical burns to his left hand, left hamstring, all toes and feet.",1
"An employee was picking up a part from the floor, lost balance and fell cracking his hip.",1
An employee was unjamming the tapper machine and amputated the right index fingertip.,0
An employee suffered electrical burns to both hands and fingers while removing the alpha-phase tap from the bushing of a recloser.,1
An employee was using an air powered nail gun and shot a nail into their left hand. The employee was hospitalized.,1
An employee was recalibrating the fryer and adjusting the vent above the fryer from a table. The employee fell and injured the right wrist.,1
An employee was hospitalized after being struck by a load that slid off while attempting to secure it onto a trailer and crushed his legs.,1
"An employee was working on the roof structure of a stadium to install structural steel. The employee was using a wire rope to pull a 600 pound steel beam when the beam fell from the roof structure. The employee's hand was caught in the wire rope causing the tip and left side of the employee's left pinky finger to be separated from the bone, but still attached.",1
An operator slipped and fell off his excavator landing on a drainage pipe. The employee was hospitalized for a lower back fracture.,1
"An employee was attaching a connection to the wellhead for treatment when a stream of high pressured natural gas caused the following injuries to the employee: facial Injuries, right punctured lung, and a torn esophagus. The employee was hospitalized.",1
"On October 13, 2016, an employee was hospitalized after an arm was pulled into a machine during a cleaning activity.",1
An employee was checking the alignment on a blasting machine while it was locked out. The injured employee reached into the machine to check clearance when another employee rotated the wheel by hand. The injured employee suffered the amputation of 3/16 of the index finger.,0
An employee pinched a nerve in his back while lifting luggage.,1
"An employee was using a PIT to carry a plastic 55 gallon drum. The drum became wedged between the forks. When the employee tried to maneuver the drum, his pinky finger was caught resulting in a partial amputation.",0
"An employee was performing electrical work on a 15-20 foot fiberglass extension ladder. Upon completion of work, the employee was descending the ladder when the ladder's legs kicked out causing the employee to fall. The employee sustained a broken jaw and injured an arm.",1
An employee was servicing an HVAC unit when their left forefinger was caught between a pulley and belt when the return air fan was activated. The finger was amputated at the first knuckle.,1
An employee was repairing a car using a ball joint press and a hammer. The hammer broke and a part of it lodged in his stomach. The employee suffered a puncture wound resulting in a blood clot.,1
"The employee was working as a shackle chuck. He places a shackle on the beef quarter so that it can be moved to a different department. He noticed some gloves on top of a rotating sprocket above his work area. He reached his right arm to grab the gloves and his sleeve was caught in the chain, drawing his right arm into the sprocket and fracturing the radius and ulna.",1
An employee was cleaning a running pump and amputated the left middle fingertip.,0
"An employee was working on the press and switching a roll of paper on the machine. The roll shaft was stuck in a roll of paper and as he was pushing it out his left hand was caught, crushing four fingers between the roll and the shaft.",1
An employee became ill and was subsequently hospitalized that same afternoon due to a noxious odor in the building.,1
"An employee was climbing up the crane's fixed ladder to access the deck of the crane in order to work on the jib bracket. As he climbed onto the deck, he lost balance and fell about 4 feet to the ground resulting in a broken left fibula. He was admitted to the hospital.",1
An employee was unjamming a piece of equipment and two fingers were caught resulting in a deep laceration to one finger and a fingertip amputation on the other.,0
An employee was cleaning out a gin stand and slipped. Two fingertips on the right hand were amputated when they contacted a sharp edge inside the cotton gin.,0
"A temporary employee operating a ""Set Out Press"" amputated half an inch of a finger while retrieving a metal part from the press.",0
"An employee was adjusting a 30"" diameter PVC vertical stand pipe. There were some bricks holding up the casting, acting as adjustment shims. The employee stepped on one of the bricks as he was going to take the casting off of the vertical stand pipe. The brick, which was now underneath his foot, was on a gravel base and rolled out from under his foot as he lifted the casting off of the pipe causing the employee to lose his balance. As he was falling, his right arm and shoulder area landed in the center of the vertical stand pipe and his right upper chest area landed on the sidewall of the pipe. He was hospitalized with broken ribs and a collapsed lung.",1
An employee was operating the rubber mill. His left hand was on the controls when his right hand reached under the rubber mill and was caught between the two rollers resulting in multiple finger amputations.,1
"The worker was rotating the ""setting tool"" and placed their left middle finger inside the tool. The finger was amputated and the employee was hospitalized.",1
"An employee just completed repairing the sewer line and was backfilling the trench. As the employee was removing the wheeler, it impacted the employee's left foot and fractured it.",1
"An employee was waiting for a guardrail to be set in place by a fork lift so it could be anchored. After the guardrail was in place, the employee attempted to line up the guardrail with the anchor spots with her foot. The guardrail fell away from her into a post and came back toward her striking her left leg and fracturing the tibia.",1
"On October 14, 2016, an employee had her finger in a pivot point on a backhoe assembly to determine if the two holes were aligned. The employee operated a hydraulic control that moved the pivot point and amputated her right index finger. The pivot point on the backhoe assembly was not guarded at the time of the incident.",0
An employee loading materials onto the roof fell through a skylight approximately 25 feet resulting in broken ribs and back.,1
An employee was operating the hydraulic press brake. The pull back safety device malfunctioned and the employee's right thumb was caught in the machinery resulting in a thumb tip amputation.,1
The employee had just completed a drywall delivery and was walking down the entrance ramp to clean the area when his feet got caught in the green strapping material. The employee fell onto a piece of metal pipe and broke his lower right leg.,1
"An employee was preparing to pick up a dumpster and empty it. As the employee was unhooking the winch line from the rear of the truck, the employee's hand was on the hook/line and he inadvertently activated the winch reel in control instead of the reel out.  The line tightened and caught his left middle fingertip between it and the truck body resulting in amputation at the first joint.",0
"A worker was performing maintenance work on an air handling unit when his hand was caught between the belt and sheave, resulting in a fingertip amputation.",0
An employee was positioning a rock and smashed his fingertips resulting in an amputation.,0
An employee suffered an amputation injury to the left thumb while using a chop saw.,1
A piece of rebar was lifted with a front end loader. The rebar slid off and struck an employee causing neck and shoulder injuries.,1
The employee was leading a group of clients on a bike ride when she came to a temporary construction walkway. The employee swerved to avoid a shoe in the middle of the walkway at which point a 2 x 4 wooden plank that was sticking out into the walkway got caught in her front wheel. The employee fell off her bike onto her left side and was hospitalized with broken ribs and a fractured back.,1
An employee was hospitalized on 10/15/16 when diagnosed with advanced cellulitis on his right leg resulting from puncture wounds from thorny vegetation indigenous to the patrol area.,1
An employee was conducting regular maintenance of a motor on the pumping equipment. The motor was running and the employee's hand was crushed.,1
An employee fell and hit his head while trying to run away from a dog. The employee was hospitalized.,1
An employee was adjusting rollers that were not lined up to move boxes of plastic pellets when his finger was caught between the rollers resulting in an amputation.,0
An employee felt stressed and light headed and had a cardiac event. She was hospitalized.,1
"The employee was cleaning the plate heat exchangers when a mechanical system failure resulted in the release of pressurized steam (30-35 psi). The employee was hospitalized for burns to the stomach, groin, and both arms.",1
An employee was drying the exterior of a car and amputated the left index finger when she closed the door on her finger. The employee was hospitalized for surgery.,1
An employee was pushing a wheeled cart loaded with rectangular weights. The cart struck a wall causing the weights to shift and strike his fingers. The employee's left ring finger was cut and broken.,1
An employee was using a circular saw to cut a piece of wood. The saw got stuck in a knot in the wood. The employee tried to free the saw from the knot and the blade amputated the left middle and index fingers.,1
An employee was hospitalized with a broken left arm after being struck by a forklift.,1
"An employee was watching for oncoming traffic while a fellow worker was installing wiring on a light pole. The employee was struck by a motor vehicle that was driving illegally in reverse down a one way street in the wrong direction. The employee sustained a sprained right ankle, contusions to the left hip, thigh and forearm and lacerations to the left side of the face.",1
"An employee was exiting the postal vehicle, stepped on a rock and fell to the ground breaking the left hip.",1
"An employee was working on the ground aligning the bottom of a 13 3/8"" casing joint into the drilling rig v-door by hand. A winch on the rig floor was lifting the joint top through the v-door. The winch line was lowered causing the bottom of the pipe to slide into the injured employee's left foot resulting in a compound ankle fracture.",1
"While an employee was pulling out secondary backing to make a waste collection bag at the scales for warp waste, the employee's feet became tangled in waste on the floor. The employee fell to the ground and fractured the right femur and right hip.",1
"An employee was picking product while standing on a hoisted pallet. The employee then fell from the pallet to a concrete slab, requiring hospitalization.",1
An employee was walking through the dining room when she slipped and fell on the recently mopped floor. She landed on her left knee and then rolled on to her right side. She was hospitalized with a fractured left tibia and fractured left patella.,1
"An employee was operating a standup forklift to unload a trailer and set up a line. Her left foot became pinned between the vehicle and a wall. She was hospitalized with a fractured left foot and contusions/bruising, requiring surgery.",1
"An employee was observing a packer/hopper assembly that he had just finished when the hydraulic fitting failed and he was struck by the hydraulic hose and sprayed with hydraulic fluid. He then fell backward and struck the back and top of his head on a solid square object located approximately 5 feet behind his observation point. He suffered a small cut to the skin on the right side of his neck, bruising from the cut down across his right clavicle, bruises to the back of his neck, and a scrape to the top of his head.",1
"An employee was measuring duct for insulation while standing on a sheet of plywood that had been laid across the beams of the ceiling. The end of the platform was extending over a beam, so when the employee stepped on the end of the plywood he fell approximately 8 feet. He fractured seven ribs and was hospitalized overnight.",1
"An employee was using a rag to clean a bagger machine on the gear side when the rag became tangled in a gear and pulled his hand into the machine, amputating his right middle finger and crushing other bones in his hand.",1
An employee was operating a utility task vehicle and going uphill when the vehicle rolled over backwards and rolled down the hill. The employee suffered a lacerated head and four fractures.,1
"An employee's hand slipped while he was sanding the metal part on a 12-inch sanding machine, catching and partially amputating his right thumb between the part and the sanding disk.",0
"An employee was standing under a crane's boom while a coworker released the stow pin to disconnect a jib from the crane's boom. Once the coworker pulled the stow pin, the heavy side of the jib drifted down and made contact with the employee, dislocating his hip.",1
"An employee was leaning against a wooden handrail when it broke, causing him to fall to the ground. He broke his upper right arm and required surgery.",1
"On October 17, 2016, an employee was walking across a furnace top when he slipped and his foot entered a furnace. He suffered a third degree burn to his foot and was hospitalized.",1
"An employee was removing spoils from the tailgate of a dump truck using a scraper (flat shovel). While maneuvering near the tailgate, he tripped over a dirt clod roughly the size of a basketball and fell on the ground. He got up and fell again, breaking his left ankle, tibia, and fibula and requiring surgery.",1
"An employee tripped over a door threshold and fell on his face, breaking his neck and lacerating his face.",1
"While walking between registers, an employee slipped and fell to the floor, breaking a leg.",1
"An employee walked outside to talk with a supervisor. While walking past a trailer hitch on the back of a pickup truck, she tripped and fell onto the pavement, fracturing her left hip.",1
"An employee was struck by a forklift while walking, suffering a fractured fibula and superficial abrasions.",1
"An employee was rebuilding an intensifier on a high-pressure pump when the machine became energized by a remote operator. The piston on the pump extended on a hydraulic cylinder while the employee's hands were in the machine, pinching and amputating a finger between the cylinder and machine.",0
An employee was fastening cargo nets to a pallet when his right index fingertip was pinched and amputated between the pallet and the pallet net lock.,0
An employee was walking towards the printer in the front office when she hit her right foot on her co-worker's desk. She fell forward onto her right side and dislocated her hip requiring surgery.,1
"On or about October 24, 2016, an employee and his coworker attempted to jumpstart a car. As one car was pulled up to the other, the employee's knee was pinched between the two cars. He was hospitalized and required surgery for a broken knee.",1
"An employee was entering the plant through the door when it hit and pushed him. He lost his balance and fell to the ground, breaking his right hip.",1
"An employee was working at the cash register when she passed out, fell, and hit her head on the floor. She was hospitalized.",1
"An employee was unloading acrylonitrile from a railcar. He pressure checked the setup, found a leak, and attempted to relieve pressure from the system by removing a bull plug from the bleed location in the piping. The bleed valve was not closed at the time. Material then released from the piping system through the open valve and sprayed the employee's upper abdomen. He was hospitalized.",1
"At approximately 8:04 a.m., on October 17, 2016, an employee was counting stacked sheet metal when she was struck by a pallet being carried by an oncoming forklift. She fell and struck her right side on the concrete working surface, fracturing her hip.",1
"On 10/17/16, an employee was hospitalized due to heat-stress-related exhaustion.",1
"On October 17, 2016, an employee was attempting to clean scale out of a pipe when hot water back-flowed from the pipe and injured the employee. The employee was hospitalized.",1
"An employee was working on a trim cell unit where engine blocks are trimmed out. As he was picking up the block, he was wearing a hot mill style glove. His pinky went into the chain belt and was caught between the backside of the chain belt and the guard. His left pinky finger was amputated.",0
"A steel beam fell onto an employee's left foot, crushing four toes.",1
"An employee was walking when she twisted her ankle, lost her balance, and fell, fracturing her right wrist as she braced her fall.",1
"While walking to a truck to get materials, an employee slipped on an empty bag and fell backwards onto a concrete block, injuring the lower back vertebrae.",1
"An employee fell while walking during rounds as a security guard and suffered a broken left shoulder and right arm, as well as a facial injury.",1
"On Monday, October 17, 2016, an employee was at her carrier case on the workroom floor and bent down to pick up a mail tub to load into a hamper. When she lifted the tub, she felt a pop in her back and experienced a lot of pain. She was hospitalized with a back injury.",1
An employee was using scissors to cut a piece of plastic when the scissors cut and amputated her left index fingertip.,0
"An employee was repairing a gas leak when a dead tree fell and struck a nearby excavator. A piece of the tree then struck the employee in the head. The employee suffered fractures to the neck vertebrae, back vertebrae, and ribs.",1
"An employee was standing to the side of the road flagging traffic when a vehicle veered off the road and struck him, fracturing his tibia and ribs.",1
An employee was struck in the ankle when an 11-pound metal part fell off a rack.,1
"Employees were installing grating that consisted of 4 sheets (approximately 4 feet by 5 feet), cumulatively weighing approximately 800 pounds. When the employees disconnected the load from the crane, they realized the corner of the grating rested on the edge of an existing guard rail toe plate. The injured employee attempted to lift the grating upwards while his coworker used a spud wrench to shift the grating off the toe plate. The grating shifted and caught the injured employee's left index finger between the grating and structural steel. He suffered an avulsion to his left index finger flesh beneath his fingertip, which was crushed and cut. He required surgery and was hospitalized overnight.",1
"An employee was refilling a gas powered pressure washer when some gasoline spilled onto the hot muffler and ignited, burning his hands.",1
An employee fell approximately 8 feet while securing a ladder to a building. She landed on her back and was hospitalized.,1
An employee was cleaning in the facility when hot water entered their boot and burned their right calf.,1
"An employee was unjamming a pipe in a grinder machine. As the pipe loosened, the door to the grinder slammed shut on his right ring fingertip, amputating it from the tip to the middle of the fingernail.",0
"An employee had an adverse response to a flu shot, suffering a headache and shortness of breath.",1
"An employee was performing crane/hoist operations and was directed to shutdown operations and move the crane to another location. The employee was preparing to lock the boom for storage when the crane operator energized and activated the carriage boom, causing the boom pinhole to slide and pinch/amputate the employee's right thumb and right index finger.",1
"While delivering mail, an employee was stung by an insect and experienced an adverse reaction.",1
An employee was at a client worksite cleaning some rust off a 3 ft. x 4 ft. metal part with an electric drill and a drill bit brush. The drill bit broke and the drill bit/brush lacerated the back of his left hand.,1
"The employee was sitting on a static (not operational) skid steer bucket when he stood up and began walking to the compressor work truck. As he walked away from the skid steer bucket, he attempted to step over the angled right side of the bucket. At this point the employee tripped on the right side of the bucket and fell, putting his right arm down in an attempt to break his fall. There was a steel pothole cover nearby that was inverted, with a 12-16 in. appendage that extends out. The employee struck this pothole appendage with his right elbow as he fell, resulting in a shattered right elbow. Employee was admitted to the hospital where he received surgery for the injury.",1
"An employee collided with a cart of empty plastic bottles that was being pushed by a coworker, suffering a head injury.",1
"An employee was digging a ditch underneath a digger derrick that was lifting a transformer onto a pole. The rope holding the transformer broke and the transformer fell, hitting and fracturing the employee's arm, leg, and heel.",1
An employee lacerated the index and middle fingers while cutting ham with a band saw.,1
"On October 18, 2016, at 4:15 p.m. a temporary employee was caught between the metal building insulation (MBI) machine and the push off bar on the machine while reaching over the machine to pull insulation. The employee sustained a fractured pelvis and was hospitalized.",1
"An employee was cutting sections of a vertical pipe (shaft for a valve). When he pushed the last cut section out of the way, the pipe fell straight down and pinned his fingers between the pipe welds, breaking his right-hand middle and index fingers.",1
"An employee fell approximately 10 to 12 feet off a mixing tank platform while adding polymer from bags into the tank, fracturing his ribs.",1
An employee was speaking to a coworker in a truck when he was struck by another coworker's reversing pickup truck. He was caught between the two vehicles and suffered soft tissue damage that required overnight hospitalization.,1
The employee was attempting to couple a pipe trailer to a hitch on a backhoe and got a finger caught between the coupler on the trailer and the receiver on the backhoe after lifting it to connect the two. The right index finger was amputated.,0
"An employee was testing a prototype hydro-pad cylinder in a confined area at the maintenance shop. As the employee was putting a spacer (cone) into the cylinder, it twisted very fast via air power. When he went to stop it, his left index finger became wedged between the cone and the pipe. His left index finger was amputated above the knuckle and required surgery.",1
"An employee was performing electrical work from a 6-foot ladder. He was coming down the ladder when it slipped and he fell with it. He suffered a broken right tibia and fractured two other bones in his foot/ankle, requiring hospitalization.",1
"An employee was installing metal roofing panels when he lost his balance, slipped, and fell 14 feet to the concrete floor below. He suffered a head injury, fractured skull, broken ribs, and minor internal injuries.",1
An employee partially amputated the left index finger while using a 9-inch chef's knife to chop food.,0
An employee was operating a 60-ton press to cut steel and amputated the tip of his right middle finger.,0
An employee broke his left leg and was hospitalized.,1
"An employee was delivering mail from her vehicle. She pulled over to reload mail from the back of the vehicle to the front of the vehicle. As she dismounted her vehicle, she fell on uneven gravel and twisted her ankle. Her left ankle broke and required surgery.",1
An employee was pinned between a pickup truck that rolled forward and a skid steer resulting in a broken femur.,1
"An employee was making a delivery when he was pushed to the ground by an unknown assailant, suffering two pelvic fractures.",1
"An employee was using a table saw when his hand slipped and contacted the saw, breaking one finger and cutting off the knuckle on another finger.",1
"While driving a forklift with a bale of scrap on its load, an employee descended to cut metal wires on the bale and was caught between the forklift and a table, bruising his chest.",1
"An employee was making a delivery at a restaurant when he fell out of his truck to the ground, fracturing both wrists and an elbow.",1
An employee was evaluating a defaulted/de-energized trolley kart when the trolley kart self-energized and rapidly moved toward the employee. The employee was struck by the trolley kart and pinned between a conveyor and the bumper of the kart causing a laceration to the left inner thigh. The employee was hospitalized.,1
An employee was attempting to open a gas cover/cap when a flash fire occurred and burned the employee's face.,1
"An employee tripped and fell over a step while going through a doorway, breaking his right arm.",1
"An employee was preparing a pipe flange for paint when the pipe ruptured causing a release of trichlorosilane. The employee sustained chemical burns to the left hand, forearm and hip.",1
An employee was on his security rounds at a customer's site when he stubbed his toe on a metal plate. His toe broke and required overnight hospitalization.,1
"An employee was raking parts off the top of a slow moving conveyor (4.5""/minute) when a loud noise startled him and his finger entered a gap between the conveyor and the exit chute. The chute then shifted and dropped pinching his finger and removing his nail and fingertip.",0
An employee was hospitalized for heat stress related illness following training exercises.,1
An employee amputated their right ring finger while in the process of washing wooden pallets. The machine was not locked out at the time.,0
An employee was hospitalized for respiratory issues after working in the building throughout the day while the elevator was painted from the roof of the building. The paint fumes were pulled into the building via the ventilation system.,1
An employee was stacking rods to space out a pump. His finger was caught between the polishing rod and load cell resulting in the traumatic amputation of the distal and middle phalanx at the proximal interphalangeal joint of the right index finger.,0
An employee was injured in a motor vehicle accident in a construction zone when another driver crossed over the center line and struck their vehicle head on. The employee was transported to a hospital for a broken jaw and other physical injuries.,1
An employee was a passenger in a UTV that a customer was driving. The UTV overturned and the employee's right arm was fractured.,1
"An employee was coming down from a six foot ladder, lost his footing, and fell landing on a concrete walkway and breaking both fibulas.",1
"An employee was driving a golf cart when he lost control and flipped the vehicle. The employee sustained a broken collar bone, five broken ribs, and pulmonary contusions. A safety belt was not worn at the time of the incident.",1
"An employee was working the strip line and reported the smell of fumes suspected to be hydrogen chloride (HCl). The employee was hospitalized for headache, nausea and a sore throat.",1
"An employee made contact with a live electrical utility wire during construction of a 3 phase line. The energy entered the right hand and exited the left big toe, leaving a 1/2 inch exit wound and causing cardiac arrest.",1
"An employee was cleaning a carcass wash cabinet when the cabinet lid came down and lacerated his right pinky finger.  During treatment, the fingertip was amputated.",0
An employee was hospitalized for a cat bit on the finger.,1
 An employee fell approximately 18 feet  through an open roof hole and was hospitalized for a back injury and head laceration.,1
An employee was on a ladder changing a light bulb and fell striking his head. The employee was hospitalized.,1
An employee was removing a combiner box when his wrench crossed the D.C. cable and shorted out. His right hand was burned.,1
An employee was relieving residual nitrogen pressure on returned empty product cylinders and was exposed to methyl bromide vapors. The employee suffered second degree chemical burns.,1
"An employee was injured when the brakes on a flatbed truck did not work. As a result, the flatbed collided with an A/C unit on the ground. The employee hit his right knee on the dash. As the employee walked upstairs to report the incident, the employee fell and injured his other knee.",1
"An employee was working in the electrical box changing out an fuse block and replacing it with a motor circuit breaker. The employee made contact with a live component and an arc flash occurred causing burns to the employee's face, both hands, and forearms.",1
"An employee was freeing a jammed wood product (veneer panel plywood) from a saw line workstation.  While freeing the jammed plywood from the grader bin, the operator pinned/pinched his arm between a piece of metal angle iron (under a load) and the metal cross member causing a puncture wound on his right arm below the bicep.",1
"On October 19, 2016, approximately 7:30 AM, an employee fell approximately 5 feet while dismounting a front-end loader. The employee was hospitalized for a back injury.",1
An employee closed their right thumb in the safe door resulting in amputation of the thumb tip.,0
An employee was feeding wire to a wire stripping machine when he noticed that the wire had a loop in it. He reached to get the loop out and while his left thumb was in the loop the machine tightened the loop resulting in the amputation of the tip of his left thumb.,0
An employee was unchocking a piece of equipment when his right hand was caught by the machine belt amputating the fourth finger at the first knuckle.,0
An employee was moving a 500 pound box. The box slipped and bent her right hand backwards shattering the wrist.,1
"On October 19, 2016 at 9:40 p.m. an employee entered a compactor to get his glove and the compactor broke both legs.  The employee was hospitalized.",1
Employees were installing helical piers at a residential location when an employee was struck by the torque arm of the hydraulic power head. The employee sustained three broken ribs and a punctured lung.,1
An employee was stacking lumber and amputated three fingers on the right hand in a chain and sprocket.,0
An employee's right big toe was amputated when the loading dock platform was lowered onto his toe.,0
An employee was removing dough from the mixer and amputated a finger on his right hand.,0
An employee was walking though the pallets in the packing area and was struck by an electric powered forklift. The employee sustained a foot injury requiring stitches and hospitalization.,1
"While cleaning a sensor, an employee's right thumb was caught in a drive chain and amputated.",0
An employee was making a packaging sample and amputated the right thumb tip.,0
"An employee was using a 24"" chainsaw to trim oversized logs. During use, the chainsaw dropped and cut the employee's foot. The employee was hospitalized for surgery on his foot.",1
"On or about October 19, 2016, an electrician was setting up a 480-VAC line and received an electrical shock. The employee was hospitalized.",1
"During repositioning of a load of angle bars, an employee caught his fingers in the bundle of iron resulting in a fingertip amputation and lacerations/fractures to two other fingers.",0
An employee was vaccinating a chicken with a wing web inoculator. The bird kicked and the employee poked their left middle finger and side of the left hand. The employee was hospitalized.,1
The employee was adjusting limit switches on an energized woodworking machine (tenoner) and amputated the right ring finger.,1
"An employee was operating a paper spool crane. The employee stepped off the operating platform and was pinched between the stair rail and the moving spool resulting in abrasions, contusions, and muscle strains.",1
An employee was hospitalized after sustaining an electrical shock while unscrewing a light bulb on a training rig.,1
"On October 20, 2016, an employee was using a tool to poke holes in a freeze cloth when he slipped and the tool lacerated his left foot, requiring hospitalization.",1
An employee was operating a sugar mill and partially amputated the right index finger.,0
An employee was operating a hand held pallet jack when their foot got caught between the pallet jack and a steel storage rack upright.,1
An employee was on the roof surveying HVAC needs and fell through the metal roof breaking an arm and a leg.,1
An employee was climbing a ladder and fell fracturing a hip.,1
An employee was standing on or about the third rung of a ladder working on a light fixture and experienced electrical shock. The employee fell off the ladder landing on his head and shoulder.,1
"An employee was inspecting the seal of a container on a truck when the truck pulled away/forward. The employee was struck by the truck chassis and run over by the wheels, fracturing his pelvis.",1
A temporary employee was struck by a forklift resulting in a broken left femur.,1
An employee suffered a broken foot after a 200 lbs. piece of machinery fell from a manual pulley system.,1
"An employee was in an aerial lift washing down plant equipment with a fire hose. The fire hose became tangled in the aerial lift causing it to tip over and the employee fell 16 feet to the ground. The employee was hospitalized for a head injury, a collapsed lung and a laceration on the throat.",1
A employee working on and near a 230 Kv transmission line was shocked resulting in third degree burns to both hands.,1
"As an employee lifted a case of flour, he felt a ""pop"" in his back followed by pain in the same area. He was hospitalized with a herniated disc.",1
A serpentine gate was closed.  The employee pulled the pin in order to open the gate when a cow rammed the gate and his left ring finger was pinched between the gate and the cement wall.  The employee's left ring fingertip was amputated and the middle finger was fractured.,1
An employee was climbing a 32' fiberglass ladder to access a two-story new construction roof and fell fracturing the right heel and left foot (forefoot).,1
An employee finished delivering a package to a customer and was walking back to his truck when he started feeling cramps in his arms and legs. The employee was admitted to the hospital for dehydration.,1
An employee was getting a drink at a customer's deli when she fell through an open hatch in the floor and fractured her femur.,1
An employee was repairing a belt on the core/tenoner machine. A glove got caught in the moving chain and a fingertip was amputated.,0
"An employee was working in a tank on a drilling rig when he tripped on a beam and fell, resulting in a broken ankle.",1
An employee was working on the side of a column that was supported by a wood planked scaffold forming concrete foundation on a wall. The employee lost his footing and fell three and a half feet to the ground fracturing his right lower back.,1
"While walking, an employee slipped off a curb and injured his right calf muscle. He was admitted to the hospital for treatment.",1
An employee was landscaping and was run over by the tractor when their pant leg was caught under the wheel.,1
"An employee was on the tubing platform of a production rig placing tubes in the elevators when his safety line became snagged by the tubing being elevated. The employee was lifted off of the platform until his line separated, then he fell onto the platform. The employee sustained back and neck injuries and five broken ribs. The employee was hospitalized.",1
"An aerial artist fell 40 feet while rehearsing an aerial act.  She was hospitalized with head/neck/shoulder injuries.
",1
An employee was connecting a temporary 480 Volt AC electrical pigtail cord into an electrical box. This pigtail would supply the plug connection for the 480 Volt AC cord for the floor shot blasting machine.  An arc flash occurred burning the employees hands and requiring hospitalization.,1
An employee tasted what he thought was a sauce reduction on the stove that turned out to be a pot of chemical from the grease trap and burned his throat.,1
"An employee was attempting to raise a load with an air hoist when the air hoist came loose from its anchor point and swung down, striking the employee's torso and breaking ribs. The employee was hospitalized overnight.",1
"An employee was cleaning rollers with a rag. The rag got lodged in the roller, pulling in and degloving his right thumb.",1
"An employee was starting to wind a plastic liner onto a spool (bobbin) with a foot switch energized on the ""FE Complexor"" machine that combines layers of rubber used to make tires. The liner was slipping. The employee reached in to secure it from slipping and his hand was caught between the liner and the rotating spool (bobbin). This resulted in a fracture of both bones in the lower left arm which required surgery.",1
"As the employee was getting off the conveyor, he braced himself on the forks of the carriage system, the forks came down striking him and fracturing the left ankle.",1
An employee was adjusting a limit switch on a molding machine. The machine cycled and the employee was struck by a cylinder in the machine causing head and foot injuries.,1
An employee's right ring fingertip was amputated while operating a vertical milling machine.,0
"An employee was  getting out of the shuttle van, slipped and fell fracturing the L1 vertebrae.",1
An employee was hospitalized due to a work related back injury turning a card or moving a roll.  ,1
An employee was setting up the dry curd press to package a product when the machine cycled causing an amputation to the employee's right ring fingertip.,0
An employee was working from a scaffold driving metal studs into the wall. A metal stud kick-back struck the employee causing a laceration over the right eye.,1
An employee painting roof tiles fell off a one-story residential roof.,1
"An employee suffered right index, middle, and ring finger amputations while cleaning a dust collector.",0
"While performing form work, an employee fell 14 feet down with the form. The form fell on top of the employee, causing a broken sacrum and pubic bone.",1
An employee suffered left index and middle fingertip amputations.,0
"An employee was helping to set a concrete lid weighing a couple hundred pounds for an electrical box in place. One end of a length of steel chain was attached to a steel loop (hasp) embedded in the concrete lid.  The employee attempted to attach the other end of this chain to a steel loop (hasp) on the back (underside) of an excavator bucket when the excavator boom unexpectedly dropped, pinning the employee's right thumb between the bottom of the excavator bucket and the concrete lid. His right thumb was amputated at a point between the first and second knuckle.",1
"An employee slipped and fell off a roof while attaching an anchor, suffering cracked vertebrae.",1
"An employee and a coworker were carrying a box outside the store when the employee tripped on the handicap ramp, suffering a fractured elbow and pelvis.",1
"An employee was using a safety cutter to cut a 1/4-inch nylon rope when the cutter broke, exposing the razor. The employee's hand slipped, and the blade severely lacerated his left bicep area.",1
"An employee was stacking pallets at the end of a production line when she tripped over stretch wrap and fell, fracturing her left hip.",0
An employee was flipping the top half of a tank when the tank fell out of its frame and partially amputated his left big toe.,0
An employee was placing a hatch cover on a barge when it landed on and amputated the end of the employee's right pinky finger.,0
"An employee was spotting equipment being moved by a rough terrain forklift when the forklift ran over the employee's foot, breaking it.",1
An employee was troubleshooting a seized motor when the motor started and pulled the employee's thumb through the pulley. The employee suffered an amputation of the left thumb above the knuckle and bruising to the left middle and ring fingers.,0
"While modifying scaffolding, an employee fell to the ground, suffering head and facial trauma, an internal injury, a broken wrist, and a leg laceration.",1
"An employee was working on a roof when a piece a material started sliding down the roof.  The employee chased the material but was unable to stop and fell off the roof, suffering a broken wrist, facial laceration, and other injuries.",1
An employee was working on a piece of exercise equipment when a portion of the machine slipped off of the track and amputated his thumb tip.,0
"An employee was opening the cover to an exhaust fan when the motor pulley wheel and sheave caught and severely pinched the employee's left index finger, partially amputating the fingertip.",0
An employee was flagging to help a tractor-trailer driver park when a gust of wind sent a temporary job fence in the air. The fence struck the employee who sustained neck and back compressions and a fractured sternum.,1
An employee was transporting soiled laundry when she tripped and fell over a plastic banding strap that had fallen onto the floor. She broke her left arm in the fall.,1
"An employee slipped on a wet step while exiting a work vehicle, suffering a fractured left-side rib and requiring hospitalization.",1
"On October 21, 2016, an employee was packing finished goods onto trays. The trays were on a flexible conveyor system. One of the trays turned sideways and as the employee attempted to straighten the tray out , her right ring fingertip was caught and amputated between two links of the conveyor.",0
"An employee was standing on the rig floor of a water well drilling rig when a block came down, hitting and breaking the employee's left foot.",1
An employee suffered an electrical shock while cleaning the top of a blast chiller cabinet.,1
"A maintenance employee was entering a forklift when he slipped on a damp metal surface, causing him to fall and fracture his left tibia.",1
An employee suffered a left index finger amputation while feeding pig bellies into the chain and sprocket.,0
"On Friday 10/21/2016, at 0900, an employee was on the second story of a building replacing a seal on a window. The employee went to take another step up when the ladder gave out beneath him and he fell to the ground, fracturing his right and left femurs and injuring his ankle. He was hospitalized.",1
"An employee was helping to move game animals when one of them charged the employee, collided with him, and knocked him to the ground. He sustained a fractured cervical vertebrae, sprained left hand, and a cut to the head that required stitches.",1
"An employee was on the roof of a two-story house checking the felt to make sure it was smooth when he slipped on the wet felt and fell two stories, breaking his elbow and suffering a possible concussion.",1
An employee was unloading a skid of freight from his trailer when he slipped and fell onto the floor. He pulled his left hamstring muscle and was hospitalized.,1
"An employee was attempting to remove a belt from a conveyor. He used a bar for leverage to remove the belt from the pulley. The motor was on at the time. As the motor caught the bar, it jerked him back and his hand made contact with the other belt, potentially amputating his left middle finger.",1
An employee fell off a roof when a gust of wind knocked him off balance. His harness was disconnected at the time.,1
"An employee was pushing lumber through a table saw when his hand slipped and made contact with the blade, amputating his left middle finger.",0
An employee was on the trailer when he was struck by the tarp on the truck and fell to the ground. The employee sustained a right hip ball joint injury.,1
"An employee fell one level through an unmarked hole in a roof while he was removing debris and plywood. He was hospitalized for spinal and rib fractures, abrasions, and a cut to the head.",1
"An employee was replacing the filter of a duct cooling fan when the filter moved, causing the employee's hand to strike the fan. The employee suffered lacerations and fractures to the left ring, pinky, and index fingers.",1
An employee was emptying a trash bin and their finger got caught and amputated on the inside of the bin.,1
"On October 22, 2016, an employee fell to the ground while sliding tandems into place on a trailer, suffering a head contusion/possible concussion that required hospitalization.",1
"On or about October 22, 2016, at 1:10 p.m., while walking to the door of a private residence to deliver a certified mail piece, an employee tripped on the edge of the concrete driveway where it meets the grass forming a 2-inch difference in surface level.  The employee suffered two fractured bones in the right lower arm, requiring hospitalization.",1
"On October 22, 2016, an employee was pushing a stick cart. The employee had his left hand on top of the stick cart when he hit another stick cart. The wooden sticks came towards his hand amputating the distal part of his left middle finger.",0
"An employee had just unjammed a roll former and was running another flat piece through the rollers to try and determine what had caused the jam. The flat metal piece became caught in the rollers. The employee was trying to pull it through with his hands when his gloves were caught and both of his hands were pulled between the rollers. Two of his right-hand fingertips were amputated, and four left fingers were smashed. The machine was unguarded at the time.",0
An employee fell to the ground and suffered a hip fracture.,1
A forklift ran over an employee's foot and broke his ankle.,1
"An employee was climbing a steel fixed ladder that led to a steel-framed basket attached to a crane. As he was trying to grasp the top rung of the ladder, he lost his grip and fell backward approximately 12.5 feet to the ground below, landing on his right side and fracturing his pelvis.",1
"An employee was walking along the edge of the lube ""PIT"" in one of the mechanic bays.  He was cleaning the steel grates for the lube ""PIT"" when he stepped into the ""PIT"" and fell approximately 7 to 8 feet, dislocating and breaking his shoulder.",1
"An employee was monitoring a potato conveyor line when the rollers began sticking due to mud and dirt. He was using a crowbar to remove the mud and dirt when it was drawn into the conveyor.  His gloves were also drawn in, crushing and amputating his left thumb.",0
"On a three head saw machine, an employee was using a hand tool/bar to lift a chain that had a jammed buckle. The employee pressed the foot pedal to move the chain and free the buckle. When the pedal was pressed, the chain moved and caused the hand tool/bar to jerk, which pinched and amputated the employee's right-hand index finger between the chain guard and tool.",0
"While he was descending outdoor concrete stairs at a customer's premises, and the employee's knee gave out. He fell to the ground and tore his left and right quadriceps.",1
An employee was working inside of a boiler on the 13th floor of Unit 3. A piece of slag fell from above and struck the employee on the head. The employee sustained a concussion and minor lacerations.,1
An employee suffered multiple fractures and tissue damage to his arm when he opened the guard of a scrap baler. The baler was not locked/tagged out at the time.,1
"An employee was standing on a conveyor approximately 18 feet high. He was greasing the bearings when he fell to the ground below, breaking multiple bones.",1
"On October 10, 2016, at approximately 11:15 a.m., an employee was attempting to remove a load bar that had fallen off the ranks into the STC tank. While exiting the STC tank, the employee slipped and fell into the STC up to the waist, suffering heat and chemical burns to the lower body.",1
An employee was lifting the back door of a trailer filled with cranberries. He was inserting an S hook so the door would not come down before filling the trailer with water to float the cranberries out when the rear door came down and broke his thumb.,1
An employee was cutting cucumbers on a slicer and amputated the tip of her right thumb.,0
"While performing warehouse stocking operations, an employee stacked merchandise on a heavy load pallet onto a light load pallet with a forklift when the stack tipped over. When he got off the forklift to try and stabilize the heavy pallet, the stacked pallets fell on him and fractured his left ankle.",1
"An employee was blowing down a mist eliminator when the side glass broke and sprayed sulfuric acid onto the employee's face and right ear, causing acid burns that required hospitalization.",1
"On 10/23/2016, an employee slipped and fell while climbing stairs, requiring hospitalization for a lower back injury.",1
"A maintenance employee was attempting to realign an overhead conveyor belt while on a scissor lift. While attempting to reach up and pull a lever, he started to lose his balance. To steady himself, he reached his left hand up into the conveyor belt and his glove was caught in the belt, leading to a deep abrasion on the top of his left hand that required surgery.",1
"While riding and backing up a forklift, an employee's right hand was pinned between the forklift and a loading table, partially amputating a finger.",0
"An employee was pushing a rolling table when his right index finger was caught between the table and a wheel, amputating the fingertip.",0
"Two temporary employees were working to stand up paperboard tubes 18 inches in diameter, 240 inches in length, and 105 pounds in weight.  As one employee turned to walk away, one of the tubes fell and struck the first employee in the head, knocking him to the floor.  This employee sustained a fracture to the second vertebra in his neck, which required surgery and hospitalization.",1
"While demolishing an HVAC unit on a roof, an employee fell through a skylight to the floor below.",1
"An employee was unloading a garage door section from a trailer when the band that he was pulling to move the section broke, causing him to fall to the ground and dislocate his elbow.",1
"An employee was removing a satellite dish when his foot became tangled in his tool belt and he fell 4 to 5 feet to the ground below, suffering a possible concussion.",1
An employee cut the tip of his left index and middle fingers while using the Verticut overseeding machine.,0
"An employee was leak testing a 500-cc accumulator part when built-up air pressure suddenly released, creating a load noise. The noise startled the employee, causing her to lose her balance and fall backward. She hit her back, hip, and head.",1
"While operating a truck, an employee struck a parking lot light post resulting in hospitalization for a cut to the forehead and neck trauma.",1
"An employee was removing totes from the top rack of a warehouse with an industrial lift when he fell from the lift platform to the concrete floor below, fracturing his skull. Fall protection was not worn at the time of the incident.",1
"An employee was using a high pressure hose to wash a vacuum box at the landfill and slipped into the concrete lined pit, breaking his ankles.",1
"An employee was using a driveline tube over a wrench to gain leverage to remove a tie rod end. The driveline tube over the wrench slipped off and hit the employee in the head. The employee sustained a 3"" cut requiring stitches.",1
"An employee was removing trash out of the building. As he was dumping the trash from a rubber container into a steel dumpster, his left ring fingertip was smashed and amputated.",0
An employee was struck in the back by a piece of rebar resulting in hospitalization.,1
An employee injured his ring finger after his ring got caught on the edge of the Kustner machine while descending a step ladder. The finger was later amputated.,1
An employee was presorting mail when his right index fingertip was caught and amputated on the underside of the mail tray conveyor.,0
"An employee was installing two segments of a concrete chute when it closed on his right hand, crushing his fingers and requiring surgery.",1
An employee was shot by an active shooter at a truck stop.,1
"An employee was installing foam pieces into bridge deck panels on a beam when he lost his footing and attempted to jump toward the opposite beam. His body struck the beam, fracturing his nose, face, rib, and sternum.",1
"On October 24, 2016, at approximately 3:00 p.m., an employee was standing behind the demonstration stable serving customers sample candy when the employee fainted, injuring their right elbow and back.",1
"On October 24, 2016, at approximately 3:00 p.m., an employee was attempting to move a shutter head assemble from the shutter head machine on Line 16. The equipment was stuck. The employee went to get help and the two employees jogged the piece and the 40 pound shutter head fell approximately 18 inches. While the equipment was falling, the employee tried to catch it and his left middle fingertip was caught between the equipment and wood board resulting in amputation of the fingertip.",0
"A special needs child got agitated and attacked an employee as they were driving.  An aid was on the bus and attempted to restrain the child, but was unable to prevent the attack. The employee suffered whiplash, a partially collapsed lung, right shoulder sprain, and a concussion. The employee was hospitalized.",1
"Employees were going to remove an aeration pipe (18 inch in diameter and 10 feet long) that had potatoes on it with a 3/8"" chain & a skid steer with forks.  The chain was secured around the pipe and around both forks on the skid steer.  After the pipe was free of the potatoes, the skid steer driver began to back up, while another employee guided the pipe.  While backing up, one of the skid steer forks hit one of the bulkhead tubes (75-80#) that was sitting in its slot. The tube came out of its slot and fell roughly 7'8"" striking the employee on the head.  He fell backwards into the potato pile and suffered a head laceration.",1
An employee slipped and fell on a wet floor near the cafeteria resulting in a fracture to the right intertrochanteric femur.,1
An employee restarted the binder machine and amputated a fingertip. The machine was not guarded at the time of the incident.,0
An employee tripped on a mat outside his guard post and fell breaking a hip.,1
An employee was struck by a powered industrial truck while working in the finished goods warehouse. The employee was hospitalized for treatment of a broken left hip.,1
"An employee was repairing a water main when he slipped on a clump of dirt and broke his tibia, requiring overnight hospitalization.",1
"On or about 10/24/16, at 4:00 p.m., an employee was cutting a tie on a group of wires with a box cutter knife when he suffered a laceration, requiring hospitalization and surgery.",1
An employee was unloading a truck of pipe pile when his finger was pinched causing a right thumb amputation above the first knuckle. The employee was hooking up rigging from a crane at the end of the pipe pile which was beveled and significantly sharp. His right thumb was inside the throat of the hook as the crane operator was signaled to take the slack off of the rigging. When the hook was pulled into the pile edge the employee's thumb tip was pinched.,1
An employee was cutting a tree stump.  A strong gust of wind caused a large branch from a nearby tree to break off and fly toward the injured employee.  The branch struck the employee in the back of the head causing a severe head contusion.,1
"An employee was exiting the property's roadway while driving an Isuzu NPR Spray rig when he hit the two concrete walls and came to rest on an oak tree. This resulted in two broken legs, a broken left arm and wrist, a broken jaw and multiple cuts to the head and face. The employee was hospitalized for treatment.",1
An employee fell 10' through a stairwell opening from the mezzanine to the floor below fracturing a rib and the clavicle.,1
"An employee was reaching into a 6-inch opening under a machine conveyor to retrieve a part when the employee's right hand contacted the rotating sprocket, amputating the ring fingertip and avulsing the middle finger.",0
"An employee was riding an ATV when he came to a terrain that induced a sudden stop. He was thrown over the handle bars and landed on the ground, dislocating his wrists and requiring surgery.",1
An employee slipped/tripped on an uneven surface while descending the front steps of a residence and fell breaking her hip.,1
"An employee was operating a router when his hand slipped and contacted the machine, amputating his middle finger and lacerating his index finger.",0
"An employee was replacing a plow on a tractor when it slipped and fell on him, lacerating and breaking his leg.",1
"An employee was walking with a client along a public sidewalk. While she was trying to support the client, she tripped over an uneven surface and sustained injuries to her abdomen, ankle and lower back. She was hospitalized.",1
An employee was cycling the bending machine after an electrical repair. The injured employee was resting his hand on the machine and his right thumb tip was amputated when the machine cycled.,0
An employee suffered a fractured ankle while loading trash into the back of the rear load garbage truck.,1
"An employee climbed a 12-foot step ladder. He stepped off the ladder with his left foot to position it on a large round valve handle to reach an anchor point he intended to tie off to. As he reached with his left hand, to attach his lanyard to this anchor point, the large round valve turned, and the employee lost his balance and fell approximately 6 feet onto a pipe below the ladder. The employee sustained a fractured left arm, fractured thumb and two fractured ribs, requiring hospitalization.",1
An employee was pinned between two vehicles they were offloading from a low boy trailer and was hospitalized for his injuries.,1
"During excavation work, an employee stepped on loose soil and rolled his right ankle while spotting for the excavator. The employee's right ankle was dislocated.",1
Two workers were carrying a bundle of struts into a truck. The struts shifted and a strut struck a worker's ear causing a laceration that required stitches. The employee was hospitalized.,1
An employee was descending the ladder on the side of a scaffold and fell.  The employee broke his right leg.,1
"On October 25, 2016, an employee sustained an amputation injury after the employee's shirt was caught in a belt and pulley pulling the hand in.",0
An employee was closing the trailer door when he inadvertently pinched his right middle finger in the door latch causing a fingertip amputation.,0
An employee fell while stepping off of an ergonomic mat twisting an ankle and hitting their head. The employee was hospitalized.,1
An employee was assisting in stocking concrete pieces and crushed his right thumb between two pieces of concrete.,1
"While climbing down an attached, caged ladder from a boiler unit, the employee slipped and fell roughly 15-20 feet breaking his right femur and dislocating the left knee.",1
"An employee was working on equipment that was not in operation. A chain on the equipment was bound up and had tension on it. The employee took a bar to pry and loosen the chain because the chain had some energy in it. When the chain became free, the chain moved slightly, energized. His finger was above the chain and it slipped between the sprocket and the chain. His right index fingertip was caught between the chain and the sprocket and amputated.",0
An employee was drilling a hole in a piece of aluminum about 12-inches by 3-inches wide using a pedestal drill press and amputated his left index finger at the first knuckle. The employee was wearing tight fitted grip gloves. The machine was not guarded at the time of the incident.,0
"On October 25, 2016, an employee's distal right index finger was amputated when a metal door closed on the finger.",0
"On October 25, 2016, at 7:10 a.m., an employee was disassembling a load of precast concrete hollow core planks and tried to remove the stacking block before the plank had cleared the stack. The plank broke and amputated the tip and fingernail of his left index finger. He was hospitalized for treatment.",0
"An employee was lowering a trailer on a wooden block. When the block fell over, he reached down to set the block up and smashed his left thumb between the wooden block and the trailer.",1
An employee was operating a machine and amputated the right index fingertip. The machine was not guarded at the time of the incident.,0
An employee rolled her ankle while walking in the parking lot. She was hospitalized for surgery the next day.,1
An employee was cleaning the area around a shaft at the end of a conveyor. An arm was caught by the shaft and fractured. The employee was hospitalized.,1
An employee removed a guard from a conveyor belt motor to check the chain and sprockets for tension. The employee reached toward the running chain and sprocket and his left thumb was caught between the chain and sprocket resulting in an amputation of 1/4 inch to 1/2 inch of the thumb. The machine was energized at the time of the incident.,0
A driver slipped and fell off a flatbed truck. He suffered two small brain bleeds.,1
"A temporary employee was inspecting paper bales as they left the baler. He was hand picking plastic ""fuzz"" from the finished bales. Bales were stacked 2 high in the building. A row near the employee fell. The employee was found under a fallen paper bale and hospitalized.",1
An employee was using a mag drill when the glove on his supporting (right) hand was pulled into the drill.  The employee sustained a mangling injury to the right ring finger that required surgery and hospitalization.,1
An employee was struck by a skid steer while it was backing up causing broken ribs and a broken leg. The equipment has a functioning back up alarm.,1
An employee broke both wrists after falling off a ladder. The employee was working on a billboard when the hook ladder he was using slipped off the billboard. The employee fell approximately 14 feet to the ground below.,1
An employee's finger was amputated by transfer pump impellors.,1
"Employees were re-positioning a boiler's mill liner on a pallet. There were three boiler mill liners laying side by side on the pallet. As the employees were re-positioning the liner to the pallet, the mill liner shifted and the employee' right ring finger got caught between two boiler mill liners, resulting in the amputation of his right ring fingertip and a laceration to his right index finger. The employee was hospitalized.",1
An employee was servicing a restaurant machine and amputated the right index finger.,1
"On 10/25/2016, at approximately 12:00 p.m., an employee was injured as the press crew began webbing the paper through the press rollers at the beginning of a press run. During the ""web up,"" an excessive amount of paper built up in the area. The employee attempted to push the paper through the energized machine with her right hand resulting in the laceration and fracture of the middle finger.",1
An employee was trimming countertops using a miter saw. The employee suffered a laceration on the left small and ring fingers that required surgery when they contacted the saw blade.,1
An employee was driving a forklift and scraped a hand on a cement post while backing up.,1
An employee was using a utility knife to cut plastic wrap from a bundle of boxes and lacerated the tip of his left thumb.,1
An employee was troubleshooting the basket return system on the pasteurizer machine. His left forearm got caught between the shaft and the chain and the employee suffered a possible fracture.,1
An employee was washing windows and fell approximately 8 feet out of a window landing on the concrete sidewalk. The employee was hospitalized for a head injury.,1
"On October 26, 2016, at approximately 2:15 p.m., an employee was injured while felling a tree. The tree had been topped and skinned. Using a chainsaw, the employee felled the tree which caught on something as it fell. The bottom of the tree kicked back and struck the front of the employee on the leg and foot. The employee was admitted to the hospital and treated for multiple fractures to the left leg, below the knee.",1
"An employee was operating a press machine and injured three fingers on the right hand (middle, ring, and little).",1
An employee was cleaning an area of the conveyor belt when a tip of his glove got caught in the belt resulting in the amputation of the right ring finger at the first knuckle.,0
"An employee was working aloft in the bucket truck. While moving the bucket into position, the truck tipped over. The employee sustained broken ribs and internal injuries.",1
An employee pulled the generator string and his left hand got caught in the string as it returned into the generator amputating the middle fingertip and thumb tip.,0
An employee suffered an allergic reaction to a bee sting on the right hip.,1
An employee was pulling wires from a pipe while standing on an 8 ft. A-frame ladder. The employee lost balance and fell from the fourth step of the ladder breaking his left ankle.,1
An employee fell through a hole on the third floor and landed on the second floor resulting in a head injury.,1
An employee was clearing a jam in the palletizer machine and cut a finger when it was caught in a gear.,1
An employee was walking from lunch break and was struck by a tractor trailer that was backing up. The employee received multiple fractures and head trauma.,1
"A truck driver was tarping the load while on the live shed. As he was coming down, he braced himself and his left index and middle fingers were caught in a moving fan resulting in the amputation of the fingers above the knuckle.",0
An employee fell from approximately 12 feet to the lower level while descending on a fixed ladder attached to the ship. The employee suffered a broken right leg and elbow.,1
"An employee was extending a scaffold being used by employees to lay bricks for a school wall. As the employee was bolting down the scaffold towers, his wrench slipped off the bolt. This caused the employee to fall over the front of the scaffold and over the brick wall being built. The employee suffered a possible hip fracture and a dislocated shoulder.",1
An employee was operating a jointer machine and his left hand contacted the blade amputating the left index fingertip.,0
While walking an employee's knee gave out. The employee fell and twisted her leg.,1
An employee was tightening a bracket onto a form with a pneumatic wrench and caught his right middle finger between the bracket and the form resulting in a partial amputation.,1
An employee was going down the simulator slide during an evacuation drill and broke his ankle.,1
An employee was cleaning the food composter discharge chute while it was running and amputated two fingertips and damaged a third.,0
An employee placed a torpedo level on a post to straighten and level the post. Another employee was operating a hydraulic ram. When that employee activated the machine the first employee's left index finger was crushed. The finger was amputated at the hospital.,0
"An employee was operating a pallet jack when he hit a rack, sustaining an injury to his left leg.",1
"On October 26, 2016, an employee was struck in the head when a section of chain link fence blew over due to high wind. The employee suffered a concussion and was admitted to the hospital.",1
"An employee was walking down the aisle in the fab/sewing area, turned a corner, and tripped over the corner of a pallet. She fell and suffered a non-displaced compression fracture at L4 and L3 and microfractures of the pelvic bone.",1
"While cutting a soup bone, an employee's hand slipped into the path of the saw blade resulting in an amputation injury.",0
An employee was on a ladder repairing the door closer device when it snapped and the arm of the door closer device struck the employee on the head causing an eye injury and possible concussion.,1
"On October 26, 2016, an employee was operating a punch press and suffered the  amputation of the left 4th and 5th fingers.",0
An employee was struck by a forklift resulting in a broken hip and lower leg and hospitalization.,1
"On October 26, 2016, at 12:00 p.m., an employee was using a pry-bar to raise the manholes to the level of the new pavement. The manhole cover slipped off of the pry-bar as he was reaching under the manhole cover and crushed the tip of his left middle finger. The tip of his left middle finger with some bone was amputated at the hospital.",0
An employee suffered a potential amputation of the left middle fingertip while aligning a bolt hole on the bucket of the track excavator.,1
A driver backed his waste truck up to a dumpster. Another employee got out of the truck and went to the rear of the loader to hook cables to the dumpster. The driver had the truck in neutral with the parking brake set. He accelerated the motor to pick up the dumpster and when doing so the truck rolled backwards and pinned the employee between a wall and the dumpster. The employee was hospitalized with a hairline fracture in his hip and internal injuries.,1
"While crawling under a home to run coaxial cable, an employee was bitten by an unidentified/unknown insect and was hospitalized.",1
"On October 26, 2016, an employee was hospitalized for smoke inhalation from a fire that ignited in the dust collection system.",1
"On October 26, 2016, an employee was standing at a computer station and as the employee turned to leave their foot got caught in a scanner cable causing the employee to fall fracturing the left hip.",1
An employee was doing work on a drop ceiling while standing on a ten foot ladder. The employee contacted 277 volts resulting in a burn on the back of his hand and causing him to fall off the ladder. Employee fell backwards onto the concrete and was knocked unconscious.,1
An employee was removing a fuel tank with a screwdriver when the hatch fell on his left ring finger amputating the fingertip and nail.,0
Two employees were entering a sewer manhole. One of the employee's hands slipped and the second employee's middle finger was caught and amputated at the first joint as the manhole cover fell back into place.,0
"An employee suffered a fractured lower right leg, when a stair rail rigged to a chain fall became unbalanced and fell, striking the employee in the right leg.",1
The injured employee was standing on a ladder to install a sign structure located at the jobsite. A manlift operator was moving the manlift for painting projects. The injured employee was struck by a board that came out of the manlift bucket and fell to the ground. He was admitted to the hospital for treatment of a laceration to his head and a contusion to his mouth.,1
"The employee attempted to manually align boxes by pulling the bottom box forward, causing the top box to slide back and pinch the employee's right middle finger between the two boxes. A chunk of tissue was removed from the finger.",1
An employee was preparing a mobile crane for transport and amputated a portion of the left index finger when the jib moved into place.,0
An employee was stacking bundles of steel rods when two bundles fell onto the employee's legs fracturing them.,1
An employee fell from an extension ladder while climbing into the attic to change furnace filters. The employee suffered fractured ribs and a fractured right eye socket.,1
An employee operating a Bobcat suffered a broken arm and severe lacerations after a metal chain being used to lift a 450 lb. bollard pipe released unexpectedly and the pipe whipped around striking the operator.,1
"An employee was walking onsite, tripped and fell breaking a leg.",1
An employee was struck by a sit-down forklift resulting in multiple fractures to the left foot.,1
An employee was de-rigging the suspended scaffolding on the bridge. He did not see a cable and ran into the cable clips resulting in an abdominal hematoma.,1
An employee cut his wrist with a box cutter.,1
The employee was unloading CO2 into a tank for a customer. The hoses were not connected when the product (CO2) valve was opened and CO2 struck him in the abdomen knocking the employee down. The employee suffered three broken ribs and a spleen injury.,1
"On October 27, 2016, an employee was descending a ladder from a primary catwalk. She slipped while stepping down onto the last rung. The employee fell backwards resulting in a laceration and a broken elbow.",1
"On October 27, 2016, at 4:40 p.m., an employee was engaged in a flip operation and was using a hammer to tap the fixture holding the part. The hammer glanced the fixture and struck/severed the machinist's left index fingertip.",0
"An employee slipped and fell in the parking lot, suffering a broken right ankle.",1
An employee was walking down the stairs and fell 13 stair treads to the bottom landing. He was hospitalized for a neck injury and a laminectomy.,1
An employee's foot was run over by a pickup truck resulting in a broken foot and hospitalization.,1
"An employee fell 11 feet from an elevated order picker platform. The employee was wearing a body harness, but was not tied off prior to the fall. He was hospitalized and treated for two broken ribs, bruised lungs and facial lacerations.",1
An employee was assisting a patient in the restroom when they both fell on the floor resulting in injury to her back. She was hospitalized.,1
An employee was cleaning food processing equipment and amputated the right hand.,1
An employee started the pressure washer in order to wash a concrete wall when he lost control of the pressure washer wand resulting in a laceration to his neck. He was hospitalized.,1
"An employee was helping unload a wooden crate full of glass (about 1,000 lbs.) from a flat bed truck with a forklift and jib. The crate slipped loose, slid, and struck the employee. The employee was hospitalized with a broken left leg.",1
An employee was picking up a box from the floor of the trailer when he saw another box falling toward him and stepped back to avoid it. The employee felt a pop in the lower back and a sharp pain.,1
An employee was unjamming a piece of fabric from the rotary fabric cutter and amputated the left pinky fingertip. The machine was running at the time.,0
An employee was hospitalized with rib fractures and facial lacerations when a freeze dryer door fell onto the employee.,1
"An employee was spotting the PIT operator, lost his footing due to some loose ground near the unloading area, and fell. While on the ground, his leg was crushed by the bridging material when it was unloaded onto the ground. The employee suffered a broken leg and ankle.",1
An employee was cleaning with a stainless steel cleaner and felt dizzy. The employee was hospitalized.,1
An employee was transferring a package onto the conveyor of the metal detector when her finger was caught in an exposed belt and pulley. A portion of the employee's finger was amputated.,0
The employee was measuring the thickness of the granite and got caught between the granite and the roller on the conveyor. The employee's left index finger was amputated.,0
"An employee was unclogging the pump truck piping during a concrete pour. When he removed the flange, the pressure plate struck his lower left leg breaking it.",1
Employee was operating a brake press when she placed her fingers in the press brake die opening during the downward stroke of the ram and amputated three fingertips on her left hand.,0
An employee slipped on a wet floor and fell dislocating an ankle bone.,1
"An employee was repairing a pallet jack. He lifted the pallet jack by hand. When he went to lower the pallet jack, the wheel mechanism severed his right index finger at the first joint.",0
"An employee was running film on a production line. While trying to remove excess plastic film from a rubber roller, the employee suffered an avulsion injury to the left palm. The machine was running at the time of the incident. The employee was hospitalized for a skin graft.",1
"An employee was mopping a patient room, backed into a wheelchair and fell, resulting in a pelvic fracture.",1
An employee was walking into the building when the employee fell forward striking their right knee on the ground and fracturing the right knee cap.,1
A bundle of stacking sticks in the stick staging area busted open. An employee was rebinding the bundle and sustained a puncture wound between the ring and middle fingers from a splinter that punctured the seam of his right glove.,1
An employee suffered a broken leg and was hospitalized when his foot got caught in a pallet and he fell.,1
"An employee was refueling her vehicle, tripped over the fuel hose and fell breaking her right shoulder.",1
"An employee fell off the fire escape approximately 15 feet to the concrete ground below. The employee was knocked unconscious and sustained seven broken ribs on the right side, a punctured right lung and a fractured scapula.",1
"An employee climbed onto a flatbed truck to unhook equipment. As the employee unhooked the load, the chain binder's lever suddenly released, allowing the chain to fall and hit the employee's right leg, fracturing two bones.",1
An employee's right pinky finger was caught in a closing door and amputated.,1
An employee slipped on a wet floor and fell fracturing the left ankle.,1
An employee was cut by glass due to an over pressurization event.,1
An employee was sweeping floors using a floor scrubber machine. He pushed open a door which then came back and struck his right ring finger. His finger was caught between the door and the floor scrubber machine amputating part of it.,1
An employee was capping an 8 inch PVC water line. Backpressure built up in the line from a leaking valve and blew the cap off resulting in amputation of the employee's left pinky finger and a partial amputation of the left ring finger.,0
Employees were setting up a piece of concrete block manufacturing equipment using a telehandler to raise a section of fabricated steel. A piece of shipping pallet that was still attached to the steel fell from overhead and struck an employee in the head knocking him to the ground. The employee was admitted to the hospital for a concussion.,1
"The employee was raising a steel coil from a pallet with a hoist when the steel coil struck the employee, breaking his shoulder blade.",1
An employee was using a table saw to cut a piece of lumber and lacerated their hand.,1
An employee was performing maintenance/cleaning along the company's property line and fell striking his head on rocks and sustaining a head and spine injury.,1
An employee was operating the flex-nip machine. His shirt got caught in the machine and the employee suffered lacerations to the hip and chest.,1
An employee was driving a reach truck and struck an upright beam on a rack installed in the warehouse injuring their chest.,1
An employee was conducting maintenance on a gas processing unit when a flash fire occurred. The employee was burned and was hospitalized. See also 1151988.,1
"On October 28, 2016, at approximately 6:00 AM, a PVC pipe got clogged causing mud to overflow from the shakers. An employee went down to unclog it and when he did, the PVC pipe struck another employee, who was standing at the end of the pipe, on the neck. He was admitted to the hospital and was diagnosed with a fracture to the C6 vertebrae.",1
"On October 28, 2016, at 6:30 a.m., an employee was removing a piece of stuck steel from the shear. The machine was activated and a 1 inch diameter piece of angle steel was propelled into the employee's left forearm. The employee was hospitalized and had surgery. The machine was not guarded at the time of the incident.",1
The employee was putting paper products on a storage shelf and fell 2-3 feet from the step ladder fracturing a hip.,1
An employee was feeding wood into the chop saw. The employee's left thumb was amputated when the saw was activated. The saw was guarded at the time of the incident.,0
An employee was operating a packaging/sealing machine and amputated the left index fingertip.,0
An employee was spreading hot asphalt and fell sustaining second degree burns on the lower legs.,1
"While assisting with the sewer line inside the trench box, a section of trench wall fell into the box and pinned the employee against the box wall. The employee was hospitalized with a spinal injury.",1
Employees were moving a vehicle on to steel rims in the salvage yard when an employee's hand was caught between the car and the bumper. The employee suffered an amputation to the soft tissue pulp of the left pinky finger.,0
An employee was on the roof unloading the asphalt shingle bundles from the conveyor. He stepped backwards and fell from the second-story section of the roof to the one-story section of the roof fracturing his shoulder and ribs.,1
A temporary worker was operating equipment when his right arm was caught between the rollers. The employee suffered a compound fracture of the right arm and partially amputated the thumb.,0
An employee was cutting meat with a band saw and suffered an amputation to the right thumb.,0
"At approximately 2:40 a.m. on October 27, 2016, the injured employee and other employees were removing an 80 lb. bolt from a stamping press. The bolt had to be moved approximately 2 ft. over the edge of the press. The bolt was attached to a chain fall and sitting on the lip or edge of the press. An employee pulled the bolt with the tag line, but could not move the bolt over the edge. The injured employee then pushed the bolt with his hands. The bolt moved, and his right hand or finger was caught between the bolt and the edge. The employee suffered a crush/dislocation injury and his right pinky fingertip was medically amputated below the fingernail.",0
"After cutting 2 x 4s with the saw, the employee was breaking wood using his foot in a stomping motion to break the remaining halves. The half with nails sticking out swung upwards and struck the employee in the leg, lodging two nails into the employee's knee.",1
An employee was run over by a backing backhoe resulting in fractures and internal injuries.,1
"While cutting wood with a portable saw to make shelving, an employee suffered an amputation of the left index finger below the nail.",0
"As an employee dismounted from a fork truck, he could not stop the fork truck from moving. The wheel ran over his left foot, breaking bones.",1
An employee fell approximately 24 feet off a roof and sustained back injuries.,1
An employee was troubleshooting the extruder machine when hot polymer splashed and burned his face.,1
"An employee was in the infeed area of a sort machine, attempting to straighten a stack of pallets, when the stacker side arms engaged and crushed his right lower leg.",1
"On 10/28/2016, an employee was shot in the parking lot, suffering 11 gunshot wounds.",1
"On 10/28/16, at approximately 11:30 a.m., an employee was walking to the laundry room to drop off her apron when her leg gave out. She fell to the floor and was transported to the hospital for treatment.",1
An employee fell off a flatbed trailer while loading material onto it.  The employee fractured his clavicle and ribs and displaced his scapula.,1
"On 10/29/2016, an employee was performing maintenance on the reefer engine on top of a box truck, lost balance and fell approximately 12-13 feet fracturing 6 ribs and 3 vertebrae.",1
"A temporary employee was operating a planer to cut a bevel on a 40 foot steel plate. The employee stepped off the planer to remove a metal chip on the plate as it was being automatically moved into the planer, which resulted in his left foot getting caught under the plate clamp. The employee was admitted to the hospital for treatment of his broken foot and leg above the ankle.",1
An employee was going into the office and her left pinky finger was caught and amputated in the door when it closed due to high winds.,0
"An employee was hospitalized after they were struck by a 12"" discharge hose while vacuuming sediment from the river floor.",1
"An employee was operating the sealer machine when the seal arm came down and caught his right hand, burning both sides of the hand.",1
"An employee was positioning a stand-up lift truck to pick up parts. When the operator turned the steering wheel, a tire on the lift grabbed the floor. The lift swung around, causing the operator to fall out of the lift. The operator fell up against racking and the lift pinned him between the rack and the lift fracturing ribs.",1
An employee was cleaning the conveyor when his right hand was pulled into the machine fracturing the right forearm.,1
An employee was using a spike maul to set a steel spike in a wooden tie. The spike maul struck the steel joint bar and the impact broke a small piece of steel off the joint bar. The small piece of steel struck the employee in the right eye.,1
"On October 29, 2016, an employee went to the top of the bin and opened the manhole hatch to repair the sweep auger. The employee was later discovered at the bottom of the bin approximately 80 feet below the opening. The employee suffered a broken left leg and fractured vertebrae.",1
An employee fell off a ladder into a manhole and fractured a leg and vertebrae.,1
An employee was building a riser for electrical power lines and received burns to the arm and neck.,1
"An employee was backing up to load some product into condemn barrels, but did not see the open drain and fell into it. The pallet jack ran over his right leg causing a compound fracture that required hospitalization and surgery.",1
An employee was rolling pipes on a metal forming machine and smashed his left index finger in the machine resulting in amputation.,0
An employee was setting a type and inlet cover. One object was put down on top of other material and struck the top of the employee's foot breaking two toes.,1
A hydraulic dock plate was not lowering to floor completely and an employee used his hands to push it down causing the dock plate to release and amputate the tip of his right hand ring finger.,0
"An employee was changing the oil in a car while down in the oil changing pit when a jug of brake cleaner ignited, causing second degree burns to both of the employee's legs and the right forearm. The employee was hospitalized.",1
"An employee was walking from the back prep area to the line when he slipped and fell. He attempted to brace himself on the side of the fryer, but he missed and his arm went into the hot fryer. He suffered partial thickness burns to approximately 3/4 of the arm.",1
An employee was working from the scale platform and fell approximately 6 feet to the concrete below suffering fractured ribs and vertebrae and internal bleeding.,1
An employee was measuring a bundle on a moving conveyor belt. His index left finger got caught between a roller and the bundle and the fingertip was amputated.,0
An employee tripped over a long reach product grabber and fell sustaining multiple fractures to her arm.,1
An employee suffered the partial amputation of the right ring fingertip.,1
"An employee was demolishing a piping assembly. When the weight shifted, the pipe rolled and struck the employee, fracturing and severely lacerating his left index finger.",1
An employee was bitten on the right index finger by a poisonous snake and hospitalized.,1
An employee suffered second degree burns on her left leg and foot when hot water overflowed from a cooker.,1
An employee was insulating ductwork over an air handler when he slipped and fell approximately 6-9 ft. to the ground below. The employee sustained head trauma and fractured facial bones.,1
An employee was driving a stand-up counterbalance forklift and making a U-turn in the warehouse. The lift struck a rack crushing his left foot. He was taken to the hospital and had a partial amputation of one toe.,1
An employee was checking the cotton for moisture and the bagger ram caught his left arm and broke it.,1
An employee fell out of his truck and fractured the left elbow.,1
An employee was installing a conveyor system using a pry bar to separate parts and amputated a fingertip when the tool slipped and pinched his finger between the two parts.,0
"When handling a 4 foot waler and loosening bolts, an employee's finger was caught between metal bolts and the waler, amputating the left middle distal fingertip.",0
"An employee was unloading pressure treated lumber with a forklift. The employee tried to pick up three loads of lumber, but realized that the load was too heavy for the forklift. As he placed the load onto the ground, the forklift extended forward, causing the employee to fall forward out of the forklift. The employee sustained a head laceration.",1
An employee was operating a loader. A bus drove by the loader causing the door to slam closed on the employee's thumb and amputate 1/4 inch of the thumb.,0
An employee was conducting maintenance operations in the area and saw feed coming off the conveyor. His right middle finger was partially amputated when it was caught by the auger.,1
"An employee fell from a ladder, suffering broken ribs, a broken shoulder, and a punctured lung.",1
"An employee was walking across the cafeteria when she tripped on the edge of a fixed metal floor ramp used to move salad carts into the cooler. She fell on the floor, breaking her left hip. She was hospitalized for surgery.",1
"An employee slipped and fell on wet leaves on stairs outside a client's house, suffering a head injury and requiring overnight hospitalization.",1
"While clearing a jam, an employee lost balance and fell off a three-step ladder, fracturing the right wrist.",1
"While stepping off a rack shelf onto a ladder, an employee missed the ladder rung and fell to the floor. The employee suffered a broken left wrist and a back contusion.",1
"On 10/31/2016, an employee was delivering furniture to a client's house. He attempted to cross the road while holding a mattress and a speeding car hit him, injuring his nose and causing contusions to multiple body parts.",1
"On October 31, 2016, an employee's fingertip was amputated when he was attempting to use tongs on the screw casings.",1
"An employee was operating a full revolution power press when the press cycled while the employee's hand was inside the die, crushing/amputating three fingers.",1
"An employee was standing on a small work platform to reach an adjustment on the rear of a milling machine when he slipped off the platform. His left arm came down rapidly, striking the running milling blade. The blade severely cut the third and fourth fingers on the last joint, as well as his index finger.",1
"An employee was attempting to fuel his truck with diesel. He removed the fuel cap from his truck, picked up the fuel nozzle, placed the fuel nozzle in the tank, and squeezed the handle. 

It was at that point that a flash fire and/or small explosion occurred, burning his face, hands, and chest area. He was hospitalized for third degree burns.",1
An employee was attempting to stop a pipe from rolling when his left hand was caught between the pipe and guardrail of a table in the pressure washer area. His left middle fingertip was amputated.,0
"An employee was leading a driver and directing him on how to park the sweeper truck in the bay for service. The driver hit the gas, and the injured employee's legs were wedged between the moving vehicle and a parked vehicle. The employee suffered a fractured pelvis, a partial left pneumothorax, fractured ribs, a left knee injury, and a wrist injury.",1
"An employee was using a ladder to access a single-story residential roof when he fell off, landed on the ground, and broke his femur.",1
"An employee was standing on the floor surface when steel erectors struck an adjacent building, causing a piece of steel to break off and strike/deeply lacerate the back of the employee's head.",1
An employee was walking across a concrete deck and fell through an unguarded floor hole breaking the right tibia.,1
"An employee was moving a pack of sheetrock that was placed against the wall when the pack fell over and struck his knee, requiring surgery.",1
"An employee was walking around a vehicle in the back of the shop when he tripped over a safety rail and fell on the concrete floor, fracturing his hip.",1
"An employee was cutting tree limbs with a 20-inch chain saw when a falling limb possibly struck him. He lost consciousness and fell to the ground, suffering a small bump on his head.",1
"An employee was stepping off the truck, missed the step, and fell breaking the right hip.",1
"An employee was using a meat grinder when some meat became stuck to the side of the hopper. When the employee went to dislodge the meat, the employee's left hand was caught in the auger, amputating the pinky fingertip and ring finger.",1
"An employee was repairing/installing a sliding door in a door track using an allen wrench when the door arm sprung open and flung the allen wrench into the employee's neck, impaling it.",1
"An employee was refueling a job site crew boat on 10/31/16. He removed the boat  battery to plug in the portable fuel pump. During fueling, some fuel ran over and spilled inside the boat. He turned off the fuel pump, cleaned up the area, and reinstalled the boat battery. A fire occurred. He put the fire out with a fire extinguisher and suffered hand and arm pain.",1
"An employee was standing on the fender of a side-dump trailer using a torque wrench to loosen a pipe when the torque wrench broke and he fell approximately 4 feet to the ground. He hit his head, lost consciousness, and suffered facial cuts and broken ribs, requiring hospitalization.",1
An employee amputated his fingertip when it became caught under the clamp on the cutting machine.,0
An employee was on the back side of a box (where cotton is pressed) when the ram that compresses the cotton into bales came down and broke his right arm.,1
An employee slipped on a wet floor and fell resulting in a brain bleed and a fractured right elbow.,1
An employee was removing cable from the cable rack when the cable rack collapsed. The reinforcing steel holding the cables fell and struck the employee in the lower right back.,1
"An employee was using a crowbar to lift a powered industrial truck outrigger to dislodge debris from the metal outrigger wheel. While he was using his left hand to brush the debris away from the wheel, the crowbar slipped and allowed the wheel to fall on his left hand, amputating his middle fingertip and breaking his pointer finger.",1
"An employee was driving a forklift toward a conveyor when he noticed an error light at the tote scanner. He traveled on the lift toward the tote scanning area to manually scan the tote in and clear the error. He attempted but was unable to slow the machine using the plugging method or the dead-man switch. He then attempted to exit the machine. In that process, he struck the racking and his left foot became wedged between the rack and the forklift. He suffered a broken left foot and deep abrasions.",1
An employee's left index finger was amputated between the first and second knuckle by the cutting head on the DCM sleeve cut machine.,0
"An employee was conducting cleaning/unjamming operations on a dust collector machine when his hand entered the point of operation, amputating his index, middle, and ring fingers.",1
"An employee was installing a new shear in the shop. He had removed the fuses from the bottom of the disconnect and began wiring the new shear into the box when an arc flash occurred, causing an electrical burn to his left forearm. The box was not locked out from its energy source at the time of the incident.",1
"An employee was conducting landscaping activities (e.g., mowing grass and cleaning up the grounds). As he closed the gate to his box truck, his left ring finger was caught in its pinch point, causing a compound fracture that resulted in a finger amputation near the knuckle.",1
"An employee was troubleshooting a motor control bucket when an arc flash occurred, causing electrical first and second degree burns to the employee's left hand and arm, right arm, neck, and face.",1
"On November 1, 2016, an employee was reaching for a bolt in a lint cleaner when his right arm became caught and wedged, cutting his arm off.",0
"An employee was moving a box of fabric when she lost her balance and fell, fracturing her left femur.",1
"An employee was bent over checking the layout for a window opening with a tape measurer when the wind caused a nearby metal stud (weighing 60 pounds) to fall over on him. He was struck on the back and suffered a contusion, requiring hospitalization.",1
"An employee drove a truck toward the wharf crane. The crane lifted the truck while the employee was still inside. The truck and trailer became unattached, fell to the ground, and bounced onto the concrete surface, jostling the employee around inside the truck. He suffered two bruised vertebrae and required surgery.",1
"On 11/01/2016, an employee was operating a pallet jack in the warehouse when he hit a forklift and fell off the pallet jack, landing on his back. He was hospitalized with a back injury.",1
"An employee was standing near a base cover while it was being lowered by crane. The employee noticed damage on the cover and started to spin it to access the part that needed repairs. The crane operator was not aware of the employee and continued to lower the cover. The employee's fingers were caught between the cover and the crane, amputating the left fourth finger mid-nailbed and the third fingertip.",0
"An employee was unloading boxes (weighing 5 to 25 pounds) from a truck when the boxes fell on her, causing her to fall off the two-step stool. She broke her right ankle and required surgery.",1
"On November 1, 2016, at 5:50 p.m., an employee fell from a pallet mover to the concrete floor, landing on and fracturing the left hip.",1
"An employee was starting to clean the cabin of an off-road haul truck used for rough terrain when his left middle finger was caught between the truck frame and the truck door, amputating the fingertip.",0
"An employee tripped and fell over a 2-inch form, fracturing his left elbow.",1
"An employee was attempting to clear a jam on the extruder unit when the machine caught and fractured three of the employee's fingers, requiring pins and surgery.",1
An employee's right hand was crushed by a press brake when the material he was holding slipped out of place and caused his hand to enter the machine.,1
An employee was obtaining supplies from a closet and slipped and fell.,1
"While setting reinforcing 10 gauge wire for a concrete form, the wire slipped and poked an employee in the left eye resulting in hospitalization and surgery.",1
An employee slipped and fell down a ramp rupturing a tendon in the left knee. The employee was hospitalized.,1
"The bucket on a backhoe froze up and an employee tried to free it up. When the bucket moved, the employee's right hand  was pinched between the moving pin and the hole that it was inserted into resulting in a right thumb amputation.",0
"An employee was moving a standup forklift and returning it to the parking area when his foot was pinned between the forklift and a rack, breaking it.",1
An employee was climbing over the side of a 10-story residential high rise's parapet wall when he fell. His safety equipment engaged and he hit the side of the building. He was hospitalized with a broken ankle and minor rope burns.,1
"An employee was dislodging a 2-foot-long pole-top cutoff when the pole became lodged on a belt. His right hand was caught between the pole-top cutoff and the belt, which resulted in the degloving of the back of his right hand and the amputation of his right pinky down to the first knuckle. He was hospitalized.",1
An employee was setting up a centerfire machine and smashed a fingertip in the machine. The tip was re-attached. There was no bone loss.,0
"An employee was using a table grinder to grind the end of a pipe. The wheel of the grinder grabbed the pipe, causing it to shift. The employee's hand was caught between the pipe and the disconnect on the grinder, amputating the pinky finger between the first and second knuckles and damaging the ring finger tendon.",1
"An employee was on the ground setting up some steel parts when an 8-inch C-channel post that had been previously set became loose and hit the employee on the back of his head, causing head trauma. He was hospitalized and required stitches.",1
An employee was troubleshooting an air compressor. The plastic line coupling blew off and struck the employee in the face lacerating and breaking the employee's nose and breaking their cheekbone.,1
An employee was performing maintenance on a forklift when the forks came down and struck the employee. The employee suffered a shoulder fracture and was hospitalized.,1
"While walking to his car, the employee fell to the ground and suffered a laceration to the eye.",1
"While installing blocking between trusses, an employee fell through the trusses to the concrete floor, suffering a broken leg and hip.",1
An employee was installing bolts using an extension ladder and fell approximately 13 feet resulting in two broken ribs.,1
"An employee was moving a block of logs from the yokes of a machine. The operator stopped the machine and the employee stepped between the yokes to remove the log. While his foot was between the yokes, the operator restarted the machine, fracturing the employee's right foot. The machine was not locked out at the time.",1
"An employee was going up on a fixed ladder attached to a convenience store exterior wall. When he reached the top, he fell approximately 10 feet. During his fall, he hit the back side of his body on the metal toolbox of the company utility track, fracturing his spine.",1
"An employee was operating a feed mill grinder when a belt started slipping. As he was checking the belt, the machine energized and pulled his right middle finger in, pinching it between the belt and pulley and amputating his fingertip. The machine was not locked out or guarded at the time of the incident.",0
"An employee was unloading the truck, tripped in a rut and fell onto their right side rupturing the L4 vertebrae.",1
"On November 1, 2016, an employee entered a robot workspace to clear a jam in the handles machine. The robot became energized and pinned the employee against the machine, lacerating the employee's liver and causing other internal injuries.",1
"An employee was working at the loading dock to retrieve new merchandise clothing from the truck. While utilizing a Z-cart, the employee's foot was caught under the Z-cart wheel. She tripped and fell to the concrete surface, fracturing her right shoulder.",1
"While dumping refuse, an employee slipped and fell, breaking a femur.",1
"An employee was attempting to replace a chain on an energized machine when his left hand became engaged in a live sprocket wheel, amputating the third, fourth, and fifth digits.",1
"An employee was pulling on a pry bar to loosen a track on a skid steer piece of equipment. The pry bar slipped, causing the employee to fall backwards and strike the loader bucket. The employee suffered three broken ribs on the right side.",1
"On November 1, 2016, an employee suffered a stroke after assessing a patient in a room where air deodorizer had been used.",1
"On November 1, 2016, an employee was operating a machine and amputated his left index and middle fingertips.",1
"An employee fell off his horse while moving cattle. The horse then stepped on his lower left leg, breaking it.",1
An employee was lifting a piece of machinery with a crane when the load slipped and his left index finger was pinched between the beam on the crane and the load. He was hospitalized and his left index fingertip was amputated.,1
An employee was unloading parcels from a truck when was struck in the groin with a box. The employee was hospitalized for swelling and blood in the urine.,1
An employee was troubleshooting a chain and sprocket inside a welder machine conveyor when a coworker started the machine from the other end while the employee's hand was still inside. His left fourth fingertip was amputated.,0
"An employee was securing a flatbed semi-trailer on top of another semi-trailer using cargo chains and load binders when he rolled his ankle, breaking it.",1
"An employee was operating a forklift and unloading materials from a tractor trailer when he noticed dunnage under the pallet and got off the forklift to remove it. The forks then crushed his left middle finger, requiring surgical amputation of the fingertip.",0
"An employee was conducting construction activities when a wooden structural beam fell and struck the employee's head, causing an internal head injury that required hospitalization and surgery.",1
"A worker suffered chest pain and increased blood pressure due to physical exertion from training exercises, resulting in hospitalization.",1
"An employee was disembarking from a tram when she tripped due to the slight decline in elevation, breaking her upper arm, tearing her rotator cuff, and dislocating her right shoulder. She was hospitalized.",1
"While stepping out of a construction vehicle, an employee suffered a foot laceration and two fractured toes.",1
"On November 2, 2016, an employee was pushing a rolling stack of 1"" trusses toward center stage from upstage when one of the stage boards (which was on ice) shifted, creating a spot for a wheel to become stuck. The trusses began to fall over and the employee tried to stop them. When he did, the trusses struck him in the face and broke his jaw.",1
"An employee was using a pipe wrench to unstop the motor of the bagger when the pipe wrench slipped and hit him, breaking his left jaw and lacerating his neck. He was hospitalized for surgery.",1
"While coming out of a tank retaining area, an employee tripped over a retaining wall and fell to the floor, suffering a fractured left hip that required surgery.",1
An employee was picking up a metal extension for a forklift when the equipment fell on his hand and partially amputated his right middle finger.,1
"An employee was disassembling the Y-axis ball on a CNC machine when the ball came loose. He moved the ball screw and it became dislodged and struck his left index finger, amputating it just behind the fingernail.",0
"An employee was walking to his work trailer when he was struck by a work truck, breaking his left tibia and requiring hospitalization.",1
An employee was standing outside a tank that was being cleaned. The cleaning head came out of the tank through the manway and struck the employee causing a laceration to the abdomen and shoulder.,1
An employee was operating a friction welding unit when the clamp for hold-down caught and fractured the employee's left middle finger.,1
"An employee was descending a ladder and stepped down on a hose, breaking the right ankle and requiring surgery.",1
An employee was attempting to place a new shear bolt in the auger when the power take-off was engaged to line up the shaft and insert the bolt. His right arm was then caught and amputated in the auger.,1
"An employee's left foot became caught underneath a shelf in the auto parts store. When the employee attempted to walk, his foot remained caught, causing him to fall and fracture his left foot. He was hospitalized for surgery.",1
An employee was preparing to rig up a laydown truck using a rake. He was standing on top of the rake when it was activated. The rake then came back up and smashed his left foot between it and the laydown truck.,1
"An employee was using a forklift to unload a pallet from the top rack (approximately 15 feet) of an industrial storage rack. The employee stepped off of the forklift to inspect the contents of the pallet he had just moved. At this time, three separate cardboard boxes of rubber hoses fell from the top rack. While backing away, the employee suffered a scalp laceration (from being struck by the boxes or from tripping and falling).",1
An employee was on a step ladder on an elevated deck. He was attempting to secure a piece of metal on a roof overhang when he fell 12-15 feet. The employee was hospitalized for three fractured ribs and three fractured vertebrae. Fall protection was not worn at the time of the incident.,1
An employee was attempting to dislodge a piece of veneer that was caught in a machine when her glove was pulled into the drive gears in the lower in-feed belt. Her right index finger was pinched and smashed by the drive gears. The machine was running and guarded at the time of the incident.,1
"While leaning on a paver pallet, an employee fell approximately 2.5 feet. The employee's right arm was caught between the pallet and a steel plate, breaking it.",1
"While attempting to remove a piece of yarn from a stretcher machine roller, an employee's right arm was caught and severely fractured in the roller. The employee was hospitalized and had surgery. The machine was running at the time of the incident.",1
"On November 2, 2016, at approximately 11:00 a.m., an employee was walking on a flat concrete surface when he tripped over a support beam's protruding base metal flange, which was 1 inch off the ground, fracturing his right elbow.",1
An employee was attempting to make an adjustment on a golf course hole when he was run over by a deep tine machine that was being towed by a tractor. He suffered fractures to both legs below the knees.,1
"An employee slipped and fell to the floor, suffering a fractured left cheekbone, a laceration near his left eye from his eyeglasses, and a left shoulder contusion.",1
An employee was using a chop saw to cut wooden pieces for window frames when the saw amputated two of his fingers.,0
An employee was cutting paper with a large paper cutter when her left thumb entered the cutting area. The paper cutter then amputated the tip of her left thumb.,0
"An employee was working in a box truck and loading equipment. When she pulled a strap on boxes, the strap broke. She then hit her head on the box truck wall and suffered a head injury that required hospitalization.",1
"On 11/2/2016, an employee fell 10 feet to the concrete pad below while performing a tie beam inspection on a second-story deck, breaking both ankles. The deck was unguarded at the time.",1
"An employee was cutting granite to trim the edge and the saw kicked back, lacerating their chin and jaw.",1
Two employees were engaged in horseplay and one employee fell and hit his head on the shop floor. The employee was hospitalized for a concussion.,1
"The cap on a pressurized water tank blew off and the pressure knocked an employee over. The employee suffered a concussion, a broken jaw and a cut on his right arm.",1
"An employee was struck by a 10' x 10' section of wood framing while he was descending from a ladder. He fell 6 feet to the ground. While he was on the ground, the section of framing fell on top of him, breaking his collarbone, two left-side ribs, and two right-side ribs.",1
"On November 3, 2016, at approximately 1:40 p.m., a temporary employee was cleaning production equipment with sodium hydroxide material in a 5-gallon bucket. The employee wore rain suit pants, gloves, goggles, and a long-sleeve shirt. The caustic material made contact with the employee's right forearm, resulting in a burn that required hospitalization and surgery.",1
"An employee was standing in a doorway directing a forklift operator. The front-end assembly on the forklift was being lowered down to retrieve a concrete troweling machine. The boom went sideways and struck the employee, breaking three ribs.",1
"An employee tripped over a halogen light stand and suffered a knee injury, requiring hospitalization.",1
"While cleaning the windshield of a backhoe, an employee slipped and fell to the ground, suffering internal injuries.",1
"An employee was trying to bring cement into a silo. When he stuck his hand into a butterfly valve, the valve closed, smashing multiple fingers on his right hand. His middle fingertip was surgically removed.",0
An employee was standing on a trailer inside of a tank spraying foam insulation when he slipped and fell 2 feet. He landed awkwardly and fractured his right femur.,1
"A temporary employee was shot in the right knee while operating a nail gun to manufacture crates, requiring hospitalization.",1
"An employee was removing lids from a yogurt cup filler while standing on a platform that was approximately 19 inches off the floor. After unloading the lids, she walked down the step leading up to the platform from floor level, lost her footing, and fell into a 24"" high stand, breaking two right-side ribs and puncturing her right lung.",1
"Employee slipped off a side boom and hit the side boom stick, breaking his ribs and lacerating his kidneys. He was hospitalized.",1
"On November 3, 2016, an employee's hand and finger were pinched while lowering a piano plate onto a table, amputating part of the middle finger.",1
"On 11/03/2016, at approximately 5:15 PM, an employee was troubleshooting a gizzard machine that was not running properly. He was attempting to identify the problem and got assistance from a coworker. He closed the cover and shut down the machine. The machine was turned back on while the employee's right hand was in the moving/rotating parts of the chain drive and sprocket, amputating 3/4 of his index finger and 1/2 of his middle finger.",0
Two employees were arguing in the parking lot when one employee struck the other employee in the jaw. He fell to the ground and hit his head on the concrete surface.,1
"An employee was checking a truck when he saw a wire in the engine compartment. When he attempted to grab the wire, his right index finger was amputated by the fan belt.",0
"An employee was walking with a piece of pipe in his hand when he tripped over a cord that was laying on the ground. He fell to the ground and landed on his left hip, requiring hospitalization.",1
"An employee was performing work in a residential house to turn on the gas when the customer's dogs broke though the rear door and bit the employee's left forearm, fracturing it and requiring surgery.",1
"On November 3, 2016, at 8:30 a.m., an employee fell onto the floor and fractured her left hip.",1
An employee was inspecting a facility's piping and fitting systems when a 3/4-inch pipe broke. He fell approximately 4 feet and fractured one of his shoulders. The hot steam from that broken pipe caused first and second degree burns to the front and back side of his legs.,1
An employee was cutting metal with an electric saw. The saw blade jammed with material and cut the employee's right index finger.,0
"At approximately 10:25 AM, an employee was walking up a stairway where the railing had been removed for a tank installation. When the employee walked up the stairway and reached for the missing railing, he lost his balance and fell off the side of the stairs, fracturing his spine and pelvis.",1
"An employee was using an emery cloth on a bar stock that was turning on a lathe when his glove was caught on the cutting mount, pulling his left hand into the machine and cutting it.",1
An employee was  hospitalized after a blade cut four right-hand fingers.,1
"An employee was helping to dismantle a scaffold when he fell into an ankle-deep ""trench,"" causing him to lose his balance and fall. He fractured his ankle.",1
"While stepping out of a trailer, an employee grabbed the hinge of the rear trailer door. The employee's hands were pinched in the hinge, breaking the right middle finger and pinching the left index finger.",1
An employee slipped on wet grass while delivering mail. He fell and broke his ankle.,1
"An employee was attempting to check the valve position on top of a small bulk tank. He placed a ladder against the tank to get a better view of the valve and was climbing up. As he reached the half
way point, the ladder slipped on the smooth concrete surface and he fell 4 to 6 feet and landed on his right 
knee, breaking his kneecap.",1
"An employee was backing into an aisle with a motorized power jack when he lost balance and stepped off the jack. His right foot was then pinched between the power jack and a rack, requiring overnight hospitalization.",1
An employee was driving a stand-up lift when it struck a yellow rail. He suffered a laceration and three left foot fractures.,1
An employee was walking on an aluminum roof to patch it when he tripped and fell 13 feet through a skylight. The area was not marked or protected by guardrail systems or covers. The employee was hospitalized with a broken hip.,1
"An employee was standing on the back of his truck on a toolbox while grinding a pipe down. He missed a step, lost his footing, and fell on the toolbox, breaking two ribs and requiring overnight hospitalization.",1
An employee suffered a right middle finger amputation while using a wood working machine.,0
"An employee's walker caught on a loose rug as she was exiting the restroom. She fell, hitting her head and twisting her left knee.",1
"An employee was using a 6-foot pry bar to move a bent piece of pipe (4.5"" .290 wall) that would not roll down the starwheel discharge ramp. As the employee pulled on the pry bar, which was partially inserted into the pipe, the bar slipped and caught the his right ring fingertip and part of his pinky finger between the pry bar and a post supporting a pass-line chain. He was hospitalized.",1
"On Friday November 4, 2016, at approximately 5:30 a.m., a temporary employee was working with a coworker to hand feed fabric into a fabric cutter machine. At some point during the operation, fabric entangled the employee's hand and pulled it into the point of operation. The employee suffered a partial right ring fingertip amputation and lacerations to the right middle and pinky fingers.",0
An employee was cleaning a truck with a pressure washer when the employee's left hand was lacerated by the pressure washer's stream of high-pressure water.,1
"An employee slipped on leaves in the parking lot and fell, fracturing an ankle.",1
"While shelving pallets on a second layer bay, an employee fell approximately 6 feet from the layer bay to the floor, fracturing both wrists and suffering a head injury.",1
"On Friday November 4, 2016, at approximately 8:00 a.m., an employee was loading corn onto a running conveyor while a trailer was dumping corn nearby. The employee's right arm was caught on and amputated by the rotating power-take-off shaft of the auger, requiring hospitalization.",0
An employee and a coworker were arguing over a personal issue when the coworker bit and stabbed (with a metal thermometer) the injured employee. The employee was hospitalized with a punctured lung.,1
"An employee and a coworker were working to move a stack of pipes. The coworker was operating a forklift and taking layers of bundled pipe from off the stack and moving it to another area. The  employee was placing wood boards between the layers of pipe on the new stack being made. During this operation, the employee on the ground walked behind the taller stack of bundled pipes to recover some more wood for the next layer of pipe; at the same time, the coworker was using the forklift to pick up the next layer to be moved. One of the forks on the forklift knocked one of the bundles of pipe from the next lower layer, causing it to hit the employee in the arm and foot, causing a skin and muscle avulsion on his arm and crushing/amputating his foot.",1
"On November 4, 2016, an employee was moving laminated beams when one fell, hit the ground, bounced back up, and pinched the employee's right middle fingertip, resulting in an amputation.",0
An employee was cutting metal pipe with a cutting torch that used acetylene and oxygen gas during interior metal removal when the torch caused second and third degree burns to the employee's face and hands. Personal protective equipment was not worn at the time.,1
"An employee was attaching hooks to an upright storage tank when the tank moved, causing the employee to fall approximately 7 feet from the ladder to the concrete below. The employee suffered a fractured wrist and damaged heel.",1
"An employee was guiding a hydraulic cylinder ram into its storage rack while it was supported by a small jib crane. As he was guiding the cylinder, the ram slowly retracted. The head of the ram then pinched the employee's finger against the bolt and the frame, crushing and partially amputating his right index finger.",0
"An employee was standing on top of a first floor wall and was setting floor joists for the second floor when he lost his footing and fell 10 to 12 feet to the concrete ground below, suffering a head injury.",1
"An employee was walking back to her van after an outing with a client when she fell off a curb and onto the parking lot pavement. She fractured her left wrist and right shoulder, requiring overnight hospitalization.",1
"An employee was going to install bolts onto plates on furnaces located on the third level when he stepped on a piece of metal stair grating that had not been welded down. The grating flipped and the employee fell through the opening to the stair landing 7 feet below, suffering a fractured L1 vertebra.",1
"An employee was working inside of a tank that was roped off when he fell approximately 10 to 12 feet, lacerating his right ear, fracturing his right facial bone, and puncturing his upper right leg.",1
"An employee was performing a test on a device when the Teflon wires of the unit became charged. The device exploded in the employee's hands, causing small cuts and puncture wounds to both hands from small metal pieces.",1
"An employee pressed a button to raise an overhead door and ducked under the door as it was rising. The door broke loose from the its cable and fell, striking his head.",1
An employee was framing the external shell of the building when a block of wood fell off a wall and struck the employee's head. The employee suffered a concussion and was hospitalized.,1
"An employee's right hand was pulled into machine rollers, amputating the right index fingertip (above the knuckle).",0
"On November 5, 2016, an employee fell approximately 4 feet from a ladder, suffering head and rib injuries that required hospitalization.",1
An employee was reversing a powered industrial truck when it collided with another parked powered industrial truck. The employee suffered a lacerated artery in the right leg and required surgery.,1
"An employee was waiting for pipe to come out to the accumulator station where he would lower it down to build a unit. A pipe came down the line from the preheater and was moving to the next station when it went sideways on the line. When the employee attempted to straighten out the pipe, the machine's sensor activated the pipe pusher, which pinned him between the pipe pusher and the table. He suffered a fractured pelvis.",1
"On November 5, 2016, at approximately 6:15 AM, an employee was unhooking his trailer from the truck when he slipped and fell, striking the truck frame and fuel tank. The employee sustained a fractured rib, bruised ribs, and a collapsed lung.",1
"An employee was loading product onto an elevated pallet that was on a forklift. The lift operator lowered the load while the employee had his hand in the lift mast area, pinching/crushing his hand/fingers.",1
"An employee was using an air hose to blow off the router bit on a router machine. The employee's sleeve was caught in the rotating router bit, pulling his arm into the rotating equipment. He suffered a laceration on his right elbow up to his armpit. The router machine was in operation at the time of the incident.",1
"An employee was installing a circuit breaker on an existing panel. As the breaker made contact with the bus bar, an arc flash occurred, causing first degree burns on the employee's face and second degree burns on both arms.",1
"An employee was moving a cart in a warehouse when a nearby pallet that was being moved pushed the cart and smashed the employee's finger between the cart and a pole, amputating the left ring fingertip.",0
An employee was standing on a dock plate between a semi-trailer and the loading dock when the truck driver moved the trailer away from the dock. The employee fell to the ground and suffered a broken right leg.,1
"An employee was driving downhill to return a UTV (utility terrain vehicle) to a truck when he lost control and capsized, breaking 11 ribs.",1
"An employee was lifting a gear box off of a motor when a plate clamp failed, allowing a metal plate to fall on his left hand and crush four fingers. He was hospitalized.",1
An employee was attempting to feed foam through a jammed slitter when his left thumb was caught on a roller and pulled into the blade compartment. He suffered a left thumb amputation.,0
"While working on a derrick, an employee's right thumb was caught between a rotator and a stuffing box during a drilling process. The first digit of the employee's right thumb was amputated.",0
"An employee was picking up trash and putting it on the back of a truck. The employee rode on the back of the truck holding the trash while a coworker drove the truck to a dumpster a block away. The employee fell from the back of the truck to the road, suffering a head laceration and four broken ribs. The employee was hospitalized.",1
An employee was driving a car to be loaded on a cargo ship when he hit a light pole in the yard. He suffered body pain and a cut to the top of his left eye and possibly required back surgery.,1
An employee was rolling up a tarp when his glove and arm became caught in the automatic roller. He suffered a right arm fracture.,1
"An employee was selecting cases in an aisle when he could not get his jack to respond. He then became pinned between a rack bar and the backrest on his equipment while still inside the cab, suffering a lacerated liver.",1
"An employee was troubleshooting the circuit of a photo eye. When he touched the photo eye, the material next to him moved forward and caught him between two pieces of aluminum material, breaking his ribs. He fell to the ground and suffered a contusion.",1
"An employee was performing a service trouble call at a private residence. He went into the attic and put his hand down on a truss that had a live wire, suffering an electrical shock that required hospitalization.",1
An employee was cleaning the surface of a grinding plate when the plate amputated a right-hand fingertip.,0
An employee was on the shoulder of the road and as he was retrieving parts from his work truck to repair an irrigation line a vehicle ran off the road and struck him. The employee received a contusion to his right leg and was hospitalized.,1
"An employee was troubleshooting a press machine. The machine completed its cycle while the employee's hand was next to an air cylinder, partially amputating the employee's left middle finger and fracturing the left ring finger.",0
An employee fell from a height and broke his left leg.,1
"An employee was stowing a jib crane when his right ring finger was caught and partially amputated between the crane's frame and the bump stop, requiring surgery.",0
"An employee was assessing a customer's roof when the employee's ladder slid away, causing the employee to fall approximately 4 feet. The employee suffered four broken ribs and a scalp laceration.",1
"On November 7, 2016, an employee tripped and fell while picking up scrap buckets and stuck out the left hand to catch him/herself from falling. The employee's left hand entered a cut-out on a turning machine mechanism, amputating the middle fingertip.",0
"On November 07, 2016, an employee who had been servicing a circulating water pump began to feel ill. The employee sought treatment at a local hospital and was diagnosed with legionellosis.",1
"An employee was sand blasting parts when the sand blaster fell. As he tried to catch the sand blaster, it discharged into his left armpit, requiring hospitalization.",1
"Two employees were changing out a belt on a piece of equipment. They locked out the machine and were pulling belts on a pulley. The first employee was aligning the belt around the next groove when the second employee manually gave the shaft another turn, trapping the first employee's finger under the belt and above the pulley. His left index fingertip was amputated.",0
An employee was operating a circular saw when it cut the employee's hand.,1
An employee was driving a powered industrial vehicle (PIV) when it struck a column. The employee's left leg was pinched and crushed between the column and the PIV.,1
"An employee was working on a new recycler, when a piece of the recycler fell on and partially amputated the employee's middle finger.",0
The employee went to a 5-drawer office cabinet and pulled the top drawer open. The two drawers on the bottom came out at the same time the top drawer was open and the entire cabinet fell over and landed on the employee. The employee injured her hip and sustained lacerations to her legs and upper body.,1
"An employee was performing maintenance work on an injection molding machine, attempting to unclog a valve, when pressure that built up behind the valve caused it to release hot nylon. The nylon burned the employee's right hand, requiring overnight hospitalization.",1
"An employee was struck by a truck in the parking lot, suffering possible back and neck injuries.",1
"An employee was loading a dolly of product inside a truck when he tripped or fell and the loaded dolly fell onto his right leg, breaking it.",1
An employee was removing a door wedge to close a door when the employee's left pinky finger was pinched in the closing door. The employee's left pinky was amputated to the first knuckle just above the nail.,0
"An employee was replacing roller bearing adapters on a railcar when the jack moved, causing the side frame to move. When the jack moved, the employee's right hand was partially between the adapter and the side frame, compressing his right middle and ring fingers and amputating the first joint of his index finger.",1
"An employee was operating a centrifugal furnace to manufacture silicon when the furnace blew out, burning the employee's lower body extremities.",1
An employee was preparing to re-thread ropes on a sheave pulley when his right middle fingertip was amputated.,0
A horse kicked an employee in the torso with both back legs.,1
"An employee fell through a tray ceiling while working in the attic of a residential home, suffering a bruised knee and cut hand.",1
An employee was working on a vehicle on the lift with the engine running. The employee attempted to stop the spinning front wheel and caught their left index finger in the wheel spokes resulting in amputation at the first knuckle.,0
"An employee was cleaning the funnel on a die cast machine while standing on an inverted pail. He slipped off the pail and tried to catch himself with his right hand. The die cast's shot rod retracted, catching and crushing his right pinky and thumb, resulting in fractures.",1
"An employee stepped off a curb and fell while walking in the parking lot, suffering a shoulder strain.",1
"An employee was pushing a food cart to an outside garbage container when he fell. He suffered two hematomas and an elbow contusion, requiring hospitalization.",1
An employee had an allergic reaction to cleaning chemicals used in her area of operations. She was admitted to the hospital for breathing difficulties.,1
An employee fell from the loading dock and injured their back and ribs.,1
An employee was cutting a 2x4 and the handheld powered saw jammed and jerked back amputating the end of his left thumb.,1
"While installing a light fixture, an employee was shocked and fell from a ladder, hitting the ground and suffering a lower back injury. The employee was hospitalized.",1
An employee was clearing a jam on the printing press and sustained a partial amputation of the left ring finger and a laceration to the left middle finger.,1
"On November 7, 2016, at approximately 8:15 a.m., an employee on a ladder was installing an overhead gas line approximately 12 feet above the ground. A coworker climbed the backside of the employee's 10-foot fiberglass ladder, causing the support rungs to bend and the ladder to collapse. The employee fell to the concrete below and was hospitalized for a fractured collarbone and punctured lung.",1
"On 11/07/2016, an employee was standing on a tire when he slipped and fell 3 feet to the ground, suffering a hip fracture. He was hospitalized and required surgery.",1
"An employee was removing a loose board from the floor of a trailer when he lost his grip and stepped on a nail sticking out of the floor, puncturing his left foot.",1
A temporary employee was sawing wood with a table saw when the saw amputated his right thumb tip.,1
An employee was installing acoustic panels while standing on a Perry scaffold system. The system became unstable and the employee fell breaking the left leg.,1
"On 11/07/2016, an employee was working in the waste area of two mills where a waste block was hung between a shaker and conveyor belt. The employee was going to pull the waste block out when the sleeve of his jacket was caught and pulled his hand between the waste block and the conveyor belt. The flesh of his hand was pulled back, requiring surgery.",1
"An employee was installing a grain bin while standing on a ladder when a nearby coworker's ladder fell on him, causing him to fall 13 to 15 feet to the ground below. He suffered a broken left arm and facial cuts.",1
"An employee was walking down a staircase when he overstepped from the second-to-last-step to the bottom of the staircase and fell forward onto his knees. The patella tendons were torn in both of his knees, requiring surgery and hospitalization.",1
"An employee was exiting the driver side of a line truck when he slipped off the top step and fell to the pavement, fracturing his vertebrae.",1
"While operating a forklift, an employee struck a truck that was being repaired. The employee then attempted to reverse the forklift while a hand was on the outside of the roll bar, but went forward instead. The employee's right pinky finger was caught and amputated between the forklift's roll bar and the truck.",1
"An employee was cleaning electrical contacts when an arc flash occurred, burning the employee's arm.",1
An employee was cleaning an auger when he dropped a tool in the machine. The moving auger amputated his finger as he attempted to retrieve the tool.,1
An employee was performing maintenance on a conveyor when a roller caught and amputated the employee's left middle and ring fingertips.,0
An employee was polishing a metal shaft on a lathe when their hand was pulled into the lathe tearing skin and muscle.,1
"An employee was replacing a sprinkler pipe while standing on a trestle ladder. As he was tightening the sprinkler pipe with a pipe wrench, he lost his grip and fell from the ladder, injuring his head, back, and left shoulder. He was hospitalized.",1
"An employee was using a metal shear when the shear guard came down and crushed his left ring finger, amputating the fingertip.",1
"An employee was working in the fitting room area when she felt dizzy, experienced a racing heart, and passed out due to dehydration. She was hospitalized.",1
"An employee was struck by a car in a work zone, suffering a head laceration, leg and torso bruising, and internal injuries.",1
"An employee was operating wire pulling equipment when the glove on his left hand was caught in a rope, which pulled his arms and body into the equipment. His left thumb was amputated and he required surgery for right wrist and arm injuries.",1
An employee received an electrical shock of 277 volts while installing commercial light fixtures.,1
An employee slipped off a rung while descending a fixed ladder. The employee used a hand to cover the face to avoid a direct strike and suffered a left wrist injury that required surgery.,1
An employee was struck by a counterweight while adjusting lines during workover rigging activities. The employee suffered facial injuries and a fractured eye socket.,1
"An employee was transferring water from one pot to another when the hot water spilled onto both feet, causing third degree burns that required hospitalization.",1
"An employee struck a pole while driving a forklift and was ejected. The employee lost consciousness, suffered a neck injury, and was hospitalized.",1
An employee was attempting to close the safety clasp on a lifting hook when his right middle finger became stuck in the clasp and was partially amputated.,0
"An employee was being trained on an electric pallet jack when he swerved into a parked semi truck. His left leg was caught between the truck and the pallet jack, breaking it.",1
"An employee had just finished a maintenance function on the de-burring machine and was in the process of starting it back up. The employee was then caught between the hopper and de-burring table, suffering a crushing injury to the upper left chest, including a fractured scapula and extensive bruising. The employee was hospitalized overnight. The machine was running at the time of the incident.",1
"An employee was trying to pry a bar away from a lint cleaner drum when the pry bar slipped, catching the employee's left little finger and amputating it at the first knuckle.",0
An employee's left foot was crushed and lacerated between a forklift and a shelving guardrail as he stepped off the lift. The forklift was moving at the time.,1
"A truck rolled over both of an employee's legs after the employee exited the vehicle, fracturing both of the employee's ankles.",1
"An employee was using a pickaxe to poke and break up clumps of material inside a hopper when the spike end of the pickaxe was caught by a rotating auger in the hopper, causing the other end of the axe to strike and scrape the employee's face. He sustained a severe injury to the right side of his face. His lip was severely traumatized and lacerated, his facial skin was ripped and peeled, and his cheekbone broke.",1
"An employee was cutting a steel I-beam using an oxygen/acetylene torch. When he cut all the way through the beam, it fell on and broke his right leg.",1
"On November 8, 2016, an employee was hospitalized after tripping over a pallet jack and suffering a leg injury.",1
"On November 8, 2016, at approximately 12:45 p.m., an employee was clearing a jam on a conveyor that carries scrap to the chipper when he made contact with the rotating band saw blade. The blade cut through his hard hat and made contact with his skull, resulting in stitches and hospitalization.",1
"On November 8, 2016, an employee was cutting and removing bandings from bundles of tubing when two pieces of tubing fell and fractured the employee's right foot.",1
"An employee was standing on a step platform and tried to pull product from a conveyor belt using a hook. The hook pulled his right hand into the conveyor, partially amputating his middle finger. The conveyor was not locked out at the time.",1
"An employee was cleaning an auger when it was activated. The auger blades partially amputated the employee's left index finger, requiring hospitalization.",1
"An employee was taking materials from a shelf when he fell backwards from a step stool and hit the back of his head, requiring hospitalization.",1
"On November 8, 2016, an employee slipped and fell while walking in the parking lot, suffering a fractured neck.",1
"On November 9, 2016, an employee suffered a pinky finger amputation while using a press brake to bend sheet metal.",1
"An employee was working in the warehouse and loading stacks of panels (3 feet wide, 48 feet long, stacked 7 feet high). One of the stacks fell over and landed on the employee, who suffered internal injuries, broken ribs, and a broken collarbone.",1
"An employee was retrieving a tire from a storage container. As he was moving it out the doorway, his grip on the tire and assembly slipped. When he tried to grab the assembly, his left finger was crushed between the tire/wheel assembly and the door frame, requiring hospitalization for a finger laceration.",1
"An employee was on a ladder approximately 8 feet up. The employee attempted to move the ladder away from a tree branch, lost his balance and/or footing, and fell onto the concrete sidewalk. The employee suffered a broken pelvis and a fractured rib.",1
"An employee was attacked while assisting with a violent patient, requiring hospitalization for a concussion.",1
"An employee was locking truck compartment doors in the parking lot when a coworker lowered an outrigger on his right foot, crushing it.",1
"On November 9, 2016, at 3:45 p.m., an employee was using a cutting torch to cut through an I-beam that rested on a forklift when the I-beam fell and crushed the employee's foot, amputating two toes.",0
"As an employee was reversing the forklift, he placed his right hand on the forklift cage. His thumb struck against a cylinder protruding from one of the plastics machines, amputating three-quarters of the thumb.",0
"An employee was helping to remove and install new steel roofing on a barn when he fell approximately 20 feet through the roof insulation to the concrete floor below, injuring his bottom lip, right eye, and elbow. He required hospitalization and surgery.",1
"An employee was attempting to clear a jam from a tapper machine when his right index finger was pinched between the shuttle piece and the metal frame, partially amputating his fingertip.",0
"An employee was driving a scissor lift down a loading ramp when the lift suddenly jack knifed and started to slide. The lift tipped over and the employee attempted to jump out but was tied off to the lift, causing the employee to break a femur.",1
An employee was operating a power press and attempting to place a part when four left-hand fingers were amputated in the pinch point between the press die and the part.,1
An employee's left ring finger was pinched and partially amputated between two parts while stacking parts on a rack.,0
"An employee was using a jackhammer to cut a hole in a concrete road when the jack hammer bounced onto his right foot, severely cutting his big toe.",1
"An employee was operating a forklift when the lift slid down an embankment. As the forklift was tipping over, the employee was ejected and broke his pelvic bone.",1
"An employee was climbing an extension ladder to access a single-story roof when he slipped at the roof edge and fell 8 to 9 feet, sustaining a broken leg and facial trauma.",1
An employee's lower leg was caught in a grain transfer auger as the employee was running beans from one bin to another. The leg was amputated above the knee.,1
"An employee was packaging lunch meat containers on a conveyor line when one of the container lids became dislodged. When she tried to retrieve the lid, her fingers were caught in the middle of the two adjoining conveyer lines. Her right ring and middle fingers were severely lacerated, and her ring finger had to be medically amputated.",0
"An employee was manually operating a filler machine with a coworker. While he was moving the filler, one of his fingertips was amputated before the first knuckle.",0
"An employee was operating a powered pallet jack when she ran into a metal barrier. Her legs were pinned between the metal barrier and the jack, fracturing both ankles.",1
"An employee was sitting on the floor and organizing items under a desk. When he tried to lift himself up onto a rolling chair, the chair rolled out from under him. He then fell, hit his head on the wall, and rolled onto his right shoulder.",1
An employee sustained a fingertip amputation when it was caught in a door slammed by another person.,0
"An employee was unloading a hopper when the hopper door closed on his left thumb, amputating the tip.",0
"A temporary employee was operating a filler machine when the machine's roller bearings caught his glove and pulled his hand in, amputating his right index finger just before the first knuckle.",1
"An employee was attempting to reinstall a chain on a drive sprocket when his right thumb was pinched as the chain rolled the chain sprocket, amputating his thumb below the knuckle.",0
An employee suffered an amputation while working on a trim press.,0
"After delivering mail to a house, an employee turned and started to descend the steps, which were wet. He slipped on the steps and broke his left ankle, requiring surgery.",1
An employee's fingertip was amputated in a machine.,0
"An employee was reassembling the funnel component on a machine when he slipped and fell approximately 3 feet from the crossbar in front of the machine to the floor, fracturing his left wrist.",1
An employee was cleaning print ink on a roll with a cloth when an uncovered gear at the end of the roll amputated his pinky finger. PPE was not worn at the time of the incident.,1
"An employee tripped and fell, breaking her hip and requiring hospitalization.",1
"An employee was using an overhead crane to load a raft onto a pre-former. As the raft went down into place on the pre-former, the employee's left middle finger was between the raft and the pre-former. This resulted in a pinch point that amputated his left middle fingertip/pad and fingernail.",0
"An employee leaving the kitchen slipped on tartar sauce and fell, fracturing a hip.",1
"An employee's sleeve became caught and tangled in a 3-inch magnet drill's bit, breaking the left arm in two places.",1
An employee was cutting laminate on a table saw when he became dizzy and put his hand down on the table to catch his balance. The sawblade then amputated his left index fingertip.,0
"On November 10, 2016, an employee tripped and fell over a pallet while assisting a vocational rehab member. The employee suffered a broken right elbow.",1
"An employee was struck by a vehicle while crossing the street, suffering a concussion, a cut over the left eyebrow, and a broken left leg.",1
"After checking sulfur levels in a fertilizer building, an employee fell while descending a fixed wooden ladder and sustained a broken pelvis, broken ribs, broken C-3 vertebra, and internal bleeding as a result of the fall.",1
An employee's fingertip was caught and amputated in a paper coating machine. The machine was not locked and/or tagged out at the time.,0
An employee was descending a 12-foot column form and came down on a section of rebar that was in his path. The piece of rebar impaled his left upper leg.,1
"While cleaning the blade on a waste truck, an employee's hand was caught and injured in the blade area, requiring hospitalization. The truck was running at the time of the incident.",1
"An employee was dumping lime from a flatbed dump truck onto a customer's field when the truck tipped over. The employee was inside the cab at the time of the incident and suffered a cervical fracture, a leg hematoma, and several contusions.",1
"An employee was attempting to unhook an aircraft tow bar from an aircraft tug when a coworker put the tug in neutral. The tug lurched slightly and the mechanism that secured the tow bar closed onto the employee's right thumb, requiring hospitalization.",1
"When an employee opened a trailer door, a mini refrigerator fell out and struck the employee on the head, causing a simple spinal fracture.",1
"On November 10, 2016, an employee was cleaning glue machine rollers when his hand was pulled into the chain and sprocket area, partially amputating his ring and pinky fingers.",1
"On November 10, 2016, an employee's right ring finger was caught and avulsed between a guard and a band saw, requiring amputation.",0
"An employee was ""locating"" cotton bales (scanning bar codes) weighing 480 pounds when the bale(s) fell and struck him. He lost consciousness and sustained a broken leg, back injury, and laceration on top of his head from ear to ear. He required surgery.",1
"An employee was moving an A-frame across a loading dock when a drain tipped over and fell. The employee was trapped between the wall and the falling material, breaking his leg.",1
An employee's left middle finger was caught and amputated between a refrigerator door and a room door.,0
"An employee was walking in the parking lot when she fell and hit the ground, breaking her nose. She was hospitalized.",1
"An employee fell through a drop ceiling while servicing the condenser on a cooling unit. The employee struck a 3'x4'x5' cart and then fell to the concrete floor below, fracturing the L1 and L2 vertebrae.",1
An employee's finger was struck by a locking mechanism resulting in amputation.,0
"The employee was climbing the asphalt distributor tank to take measurements when a fire occurred. The employee was burned on the hand, face and upper torso.",1
"An employee finished loading a vehicle, turned to walk away, and stepped/slipped on a rotten banana peel. He fell forward onto his left knee and broke his kneecap.",1
An employee's finger was pinched in a printing machine.,1
"An employee was loading a box when it fell back, causing the employee to lose balance and fall. The employee suffered a broken rib and punctured lung.",1
An employee slipped on a condiment spill and hit her head on the floor. She was hospitalized.,1
"An employee was unloading sulfuric acid 98% from a truck. When he disconnected the truck's black transfer hose from the host's receiving cam lock, he was sprayed with the chemical and suffered severe chemical burns to his neck, abdomen, left thigh, and left calf.",1
"An employee was walking out of the showroom to greet a customer when she stepped off a walkway ramp, twisted her ankle, and fell on her left side. She suffered abrasions to the left knee and forehead and a fractured left elbow.",1
"While attempting to unclog a jammed leaf blower, an employee's left index fingertip was amputated by rotating parts.",0
An employee fainted while walking from one building to another. The fainting was considered to be work-related and stress induced.,1
"An employee was walking with crutches. As she turned around, she tripped and fell, breaking her right hip.",1
An employee was compacting an embankment (fill material) using a single drum vibratory roller when the machine overturned. The employee was hospitalized with a broken pelvis.,1
"An employee was changing steel form panels to create a box culvert. The corner panel (located on a forklift) had a loose screw that broke, causing the load to disengage and drop 6 inches. A panel fell on the employee's foot, causing an injury that required that hospitalization and surgery.",1
An employee's left leg was fractured when he tried to prevent his reach truck from striking a fixed guardrail.,1
An employee was inside a packaging machine. The operator did not see him and activated the machine. He was crushed and suffered spinal injuries. The machine was guarded at the time of the incident.,1
"An employee lost his balance and fell while stepping up on a walkway, breaking his hip. He was hospitalized and had surgery.",1
"An employee had delivered a package to the front door of a resident's home. On the way back to the truck, the employee tripped on an uneven surface and fell forward, hitting her face on the cement driveway. She suffered a scratched nose, left eyelid cut, and swelling around her left eye.",1
"An employee was extinguishing a fire beneath a combine. The combine driver did not know the employee was beneath the combine and ran over the employee, who suffered internal bleeding in the right leg and a spinal injury.",1
An employee was training in the gym. After completing a workout he felt ill and his left bicep later became swollen due to a muscle injury.,1
"An employee was hooking up acid hoses to pump acid in a batch when he slipped and fell in a puddle of acid. He suffered severe chemical burns on his arms and legs, requiring hospitalization.",1
"An employee was shimming a rotor assembly in a lathe to correct a run-out condition before turning the part in a CNC turning lathe. The tail stock foot pedal was actuated, closing the tail stock on and amputating her left index finger to the first knuckle.",1
An employee suffered a left index fingertip amputation when attempting to open a package of salmon using a chef's knife.,0
An employee suffered index and middle finger amputations while cleaning the sealing machine. The machine was running at the time.,0
"On November 11, 2016, an employee was attempting to reset an alarm on a corrugator stacker and was standing on a conveyor approximately 1 foot above the ground. The employee stepped on a piece of corrugated material and slipped between the conveyor and a metal support column, fracturing the right lower leg.",1
"An employee was attempting to walk down a wooden bleacher/seating area that was adjacent to the main stairs. When he was on the fourth seating level, he fell down the remaining levels to the concrete floor below, requiring hospitalization.",1
"An employee bent over to pick up cans that had fallen from an accumulation table. When the employee stood up, the employee was struck by the stacker arm. The employee was hospitalized with a fractured right radius bone that required surgery.",1
"An employee was preparing to install pipe into a bore hole when the pipe began bouncing on cribbing. He put his right hand underneath the pipe, and his right pinky fingertip was pinched and amputated between the pipe and the cribbing.",0
"An employee went to the top of an asphalt silo to check on a drag conveyor. His left hand became caught in a drive pulley, amputating his middle finger, lacerating his index finger, and fracturing his wrist. The drive pulley was unguarded at the time of the incident.",0
An employee was adjusting the position of the cow hide between two metal jaws when his left thumb was caught between the jaws of the skinning machine resulting in a fractured left thumb.,1
An employee was descending a fixed ladder when his foot slipped. He fell from the caged area of the ladder and broke his left leg.,1
An employee leaving the facility at the end of a shift was physically assaulted by a former employee in the parking lot. The employee suffered serious head and neck injuries including brain swelling and skull fractures.,1
An employee was attempting to spray lubricant on a press machine when the machine came down on and burned the employee's right arm. Press blocks were not used at the time of the incident.,1
An employee was loading equipment and tripped on the lip of the loading ramp and fell breaking a hip.,1
"An employee was standing on a piece of wood while cleaning out a furnace when the wood slipped, causing him to fall.",1
"An employee was climbing a 6-foot ladder when he fell off and hit a water pipe, breaking three ribs and puncturing a lung.",1
"An employee was hooking a sack of animal feed up to a forklift when the sack of feed fell on the employee's left leg, breaking it. The employee was hospitalized.",1
"An employee was slicing four sirloin tip roasts on a bandsaw when the roast jerked and pulled his right ring finger into the sawblade, partially amputating his fingertip.",0
"An employee's head struck a piece of angle iron, fracturing vertebrae.",1
"An employee was driving a shuttle bus. At a stop, he stood up, felt severe lower back pain, and passed out. He was hospitalized.",1
"An employee was using a crowbar to apply leverage to a part. His left hand then became caught between the crowbar and a piece of steel, amputating the ring and middle fingers of his left hand.",1
An employee was performing daily functions when his foot or leg became caught in a car wash tunnel conveyor.,1
An employee's fingertip was amputated while aligning an 8-inch PVC drain pipe.,1
"An employee was using a baler to make bales when a piece of wrap was sticking out of the machine. While attempting to push the wrapping, the employee's foot became caught between the baler and the wrapping, causing a left toe injury.",1
"While helping a client stand up, an employee tripped on the client's foot and fell to the floor, suffering a fractured hip.",1
"An employee fell from a tricycle (used to cover large distances and transport tools) to the ground, injuring his hip and requiring surgery.",1
"On 11/11/2016, an employee tripped over a cable tray that was sticking out of a doorway and fell to the floor, suffering broken ribs and a punctured lung.",1
"On November 11, 2016, an employee was installing a crusher on a test stand when he fell approximately 4 feet from the operator platform to the floor below. He struck and lacerated his head on the side of the stand, requiring hospitalization and surgery.",1
"An employee was stepping down from a 6-foot baker scaffold when he fell 3 feet, injuring his shoulder.",1
An employee was using a pie press to press crusts onto pies when her finger was crushed and amputated between two parts of the press.,0
"An employee tripped over some wires under her desk and fell, fracturing her right hip and requiring hospitalization.",1
"An employee was working at a roller coaster ride when he fell 3'6"" from the loading dock to the walkway below the roller coaster track/rail. His head struck the roller coaster rail and he required overnight hospitalization for head trauma.",1
"An employee was putting a metal plate down in the hole inside of a trench box when his hand was caught between a chain and a steel plate, amputating his index finger.",1
"An employee was climbing on the forks of a forklift to enter a freezer trailer when he lost his balance and fell to the ground, breaking his ankle.",1
"An employee was removing a clog from the acrylic acid line. When he cut the line, he reached up for the pipe to pull it down and acrylic acid leaked and burned his leg. He was hospitalized.",1
An employee was using a two-step step stool to reach a high shelf when she fell and struck her knee on the stool. She broke her left knee and was hospitalized for surgery.,1
An employee had locked/tagged out equipment and was pulling the belt manually to clean it when the employee's left pinky was pinched and amputated above the knuckle between the belt and the pulley.,0
"While cutting meat for a customer, an employee's thumb became caught in the guard/bandsaw, amputating it to the knuckle.",0
An employee's finger was pinned between a trailer's interior wall and a drum of material while loading a 450 lb. drum on a pallet skid. The employee's left middle fingertip was amputated.,0
"While installing fascia and soffit, an employee slipped on a roof tile and fell from the roof, fracturing a leg and requiring hospitalization.",1
"On 11/13/2016, an employee was conducting preventative maintenance when his upper back was struck by a falling wooden pallet near the pallet return module.",1
An employee's pinky fingertip was amputated in a door jamb when the door shut.,0
An employee was struck by a rolling mill and suffered a broken leg.,1
An employee was troubleshooting and resetting a vulcanizer machine when the equipment crushed his forearm and lacerated his hand. The equipment was not locked out at the time of the incident.,1
"On November 13, 2016, an employee dropped a cleaning pad while cleaning a hopper. When reaching down to retrieve it, the employee contacted a moving part and suffered a fingertip amputation.",0
"An employee was giving hand signals to a powered industrial truck (PIT) operator who was pushing pipe around the yard. When he motioned the operator to lower a bundle, his hand was caught between the fork of the PIT and the pipe bundle, lacerating and fracturing his right thumb.",1
"An employee instructed a coworker to reverse a forklift so he could use the back portion as a work platform. He then cut a piece of 1/4"" manila rope to use as a tagline around the protruding end of a pipe. He attempted to tighten the rope, but when he cinched down, the 1/4"" manila rope broke, causing him to fall face first into gravel. He suffered two fractured left eye bones and three fractured ribs.",1
"A clamp came off of a piece of sanitary piping that was holding a check valve in place, allowing hot water to release and spray an employee. The employee suffered burns.",1
An employee was cutting wood on a table saw when the blade amputated his right thumb tip. The saw was unguarded at the time of the incident.,0
"An employee was cleaning a slab drag when a coworker stepped on the foot pedal. The remaining air then activated the machine, which lacerated the employee's right arm.",1
"An employee was trying to fix a belt on the corrugated paper cutting machine when the belt engaged and pulled his hand through the belt and pulley, amputating his right middle finger.",0
An employee was disconnecting a chute from the top of a hopper when he scratched the lens of his eye with a fingernail. He was wearing safety glasses at the time.,1
An employee received an electric shock and burns to the right hand and lower part of the arm and face while tightening a screw inside a cubicle.,1
An employee was attempting to sharpen a tool with a grinding wheel when the employee's finger entered the wheel and was amputated.,0
"An employee was holding a metal piece in place in a milling machine when the clamp came down and struck his hand, amputating his right pinky finger.",0
A beam sitting on a skid rolled onto an employee and fractured his leg.,1
An employee's left middle fingertip was amputated.,0
"On a trash route, an employee's right foot slipped out of the truck and was caught by the tire pulling the employee out of the truck. The employee's left side of body was run over resulting in broken bones.",1
"An employee was pulling product from a conveyor line when his finger became caught in a space where there was a missing rollerball, severely lacerating his right index finger.",1
"An employee was stacking covers on the outside deck of a barge when a cover-stacking spreader bar slid down the barge cover and struck him on the right forearm, fracturing it.",1
"An employee fell 3 feet off a stage while setting it up for a show, sustaining a broken right arm and requiring hospitalization.",1
"An employee was using a rag to clean oil from a hot foil stamping machine. The machine's sensor was not working, and it fractured the employee's arm and lacerated a hand. The machine was running at the time.",1
"An employee was attempting to turn down the speed of production on a production line using the speed control, which was located on the bottom of the line. The guard had to be removed to run the shaft. The employee's right hand then came in contact with the bevel gear, completely amputating the right index finger.",0
"An employee fell while entering the building, fracturing both of her legs.",1
"A temporary employee was using a torqueing tool to torque a brake disc when his left index finger was caught between the tool's reaction arm and the bolt pack. His finger broke and was lacerated, requiring hospitalization.",1
An employee was making mechanical repairs on a machine and struck their face with a bar while removing a pin. The jaw was broken.,1
An employee experienced an asthma attack possibly related to an unknown odor in the workplace.,1
An employee was using a wire rope cutter and hammer to cut wire rope when a sliver of metal became lodged in the employee's eye. PPE was not worn at the time.,1
"An employee was using a push broom to sweep corn into a cleanout hole inside a grain dryer when his left leg fell into the cleanout hole, breaking two bones in his left ankle.",1
An employee was sawing laminate on a table saw and amputated three fingers on the left hand.,0
"An employee was struck by a steel angle while performing maintenance on a piece of machinery, suffering a torso injury and neck laceration.",1
"An employee was attempting to install a harness on a roof that was approximately 12 feet high when he fell through a skylight to the ground, injuring his neck and body. He was hospitalized for surgery.",1
"The injured employee and his coworker were lifting a lid off an installation barrel. When the coworker dropped his side, the injured employee tried to grab the falling lid. The falling metal lid lacerated and fractured his right hand exposing tendons and ligaments.",1
"An employee suffered a finger laceration while pulling a tire from a rack, requiring hospitalization.",1
"An employee fell off a chair while changing the time on a wall clock. During the fall, the employee's head struck a door jamb and was lacerated, requiring stitches and overnight hospitalization.",1
"On November 14, 2016, an employee suffered a right index fingertip amputation while operating a pneumatic crimper machine in the assembly area.",0
The injured employee was eating lunch with another employee that was eating seafood for lunch. The injured employee was hospitalized for an allergic reaction to the seafood vapors.,1
"An employee was using an overhead crane to unload wooden floor boards onto the sub-assembly of a tractor-trailer frame when his left middle fingertip was caught between a load spreader bar and a sub-assembly cross member, requiring medical amputation.",0
"An employee stopped at a truck stop and climbed to the top of the trailer that he was hauling. He was transporting a load of approximately 6,500 gallons of fuel oil. The dome lid at the top of the trailer forcibly blew off the tank, causing him to fall to the ground and suffer a neck laceration.",1
"An employee was checking a seam on an RV when he fell off his ladder to the ground, contusing his nose.",1
"While operating a packaging machine, an employee's hand was caught between the ceiling head and the die, amputating the right middle fingertip. The guard was removed at the time.",0
"An employee was loading a flatbed truck and repositioning a package when he fell off the back of the truck to the ground below, fracturing his ankle and requiring overnight hospitalization.",1
An employee suffered a fingertip amputation while clearing a jam in a conveyor.,1
"An employee was assisting with the extraction of a 4-foot by 24-foot steel plate from an excavation. As the steel plate cleared the top opening of the excavation, it rotated and struck the employee in the right side, causing a serious contusion and small tear in the kidney that required hospitalization.",1
"On November 15, 2016, an employee was cleaning excess pasta off a pasta cutter when the blade partially amputated his finger.",1
"An employee was dispatched to an oil and gas weld site to pick up produced water. When he made it to the worksite, he set his truck in position, connected the hose, and engaged the vacuum pump. A fire then occurred, causing second and third degree burns to both of his arms and part of his torso, as well as minor burns to his neck, face, and ear.",1
"An employee was climbing into the cab of a farm tractor. When the employee reached the top step of the tractor, the employee's hand slipped off the handle. The employee fell and hit the bottom step, suffering a head contusion and requiring overnight hospitalization.",1
"An employee was drilling out old electrical boxes in the pharmacy with a core drill. The core drill spun out of control with the employee on it, resulting in two broken ribs and a punctured lung.",1
An employee was attempting to clear a cardboard jam in a powered conveyor when his right thumb was caught in an in-running nip point.,1
"An employee was cleaning up her work station when she tripped over the end of a pallet and fell to the concrete floor, breaking her hip and requiring surgery.",1
"An employee was operating a triple saw to cut a frozen fish block. When the employee attempted to move the fish block, the saw blade amputated two right-hand fingers.",1
An employee was climbing a ladder and fell resulting in a fractured leg.,1
"While preparing an empty apartment for lease, an employee was shot in the face by an unknown male.",1
"An employee was removing a filter stack from a plating line area when he tripped over the plumbing of the filter/plating line. He landed on a protruding bolt, which lacerated his left forearm.",1
"An employee fell approximately 7 feet through an open hole while dismantling old stadium bleachers, suffering a broken arm.",1
An employee was to trying to make sure the bottom outlet port of a mixer was clear when the mixer blades partially amputated the employee's fourth and fifth fingers. The mixer was operating at the time of the incident.,0
An employee was driving an electric pallet jack and struck another pallet jack resulting in a broken leg.,1
An employee was walking behind an operating forklift when the forklift driver backed up and ran over the employee's foot.,1
"An employee was removing lashing turn-buckles on the bottom level of a container when a turn-buckle fell. The turn-buckle swivel crushed the employee's left middle finger between deck plating, and his fingertip had to be medically amputated.",0
"An employee was patrolling the McKelligon Canyon area in EL Paso, TX while riding a bike and fell from it. The employee was transported to a hospital where he was diagnosed as having had a heart attack.",1
"An employee was in a lift and descending when he fell out of the lift, landing on his feet. His right ankle and right heel bone were fractured.",1
"While descending from a roof, an employee slipped and fell over the ladder to the ground below, suffering a broken pelvis, fractured rib, and injured ankle. The employee was hospitalized.",1
"An employee was opening a steam oven and slipped while she was holding the tray, fracturing her right ankle and requiring hospitalization.",1
An employee was using a grinding wheel when it broke and pieces struck his left bicep. He required surgery and overnight hospitalization.,1
An employee's left ring fingertip was amputated while using a fabric saw to cut a stack of fabric.,0
"An employee was unloading precast concrete from a truck trailer when he slipped on a metal frame, lost his footing, and fell from the truck to the ground. He suffered a broken rib and lacerated spleen.",1
An employee was lining up a garment on the track of the garment cutter when the cutting wheel activated and amputated her right thumb tip.,0
"An employee was separating two stacks of bridge railing when one slipped and smashed his right little finger, amputating the fingertip.",0
"An employee was backing a powered industrial truck (PIT) out of a trailer. When he stepped off the PIT, he was struck by another PIT, which lacerated and contused his right lower leg.",1
"An employee was using an automatic tape machine when the machine jammed.  As she attempted to free the machine with her left hand, the ribbon cutting shear amputated her index finger from the tip to the first knuckle.",1
"A worker reached into a running palletizer machine to adjust a sensor.  A compression bar came down, breaking his arm. The machine was guarded at the time.",1
"An employee was attempting to fix a belt drive in a casing machine when a coworker plugged the machine back in, causing the belt drive to engage. The employee's right index finger was then caught in a sprocket and de-gloved, resulting in a medical amputation to the first joint. The equipment was unguarded at the time of the incident.",1
"An employee was in a trench preparing to set up a laser lever when an excavator bucket detached from an excavator and struck the employee, who suffered broken ribs and arm lacerations.",1
"An employee was replacing the bearing of a poultry elevator and separator using a hammer and wrench. When he hit the sprocket to gain access to the bearing, the sprocket came loose and caused the elevator to fall. The employee jumped back and the force from landing broke his right foot and lower right leg.",1
"An employee was installing a pin in a boom point that had been chilled in liquid oxygen. When the employee removed the pin with a slide hammer, an ignition occurred and caused the pin to shoot out of the hole and to strike the employee. The employee suffered burns to both hands and a broken thumb.",1
"An employee was transforming hot resin from a 55-gallon drum that was elevated by a forklift over an open vat. The employee opened a gate valve on the drum and the valve popped off, creating an uncontrolled release of the hot liquid that caused serious burns to his right forearm. He was hospitalized.",1
An employee was cleaning a machine and amputated a fingertip.,1
"An employee was servicing a strapping machine that applies multiple polyester straps to compressed bales of cotton. The employee was checking the point were a friction weld fuses the two ends of the strapping together when the employee's right arm/wrist became strapped and trapped to the expanding bale of cotton. The right arm was caught and compressed under considerable pressure, requiring hospitalization.",1
An employee suffered a back injury and required hospitalization after the employee's chair broke.,1
An employee suffered a left index fingertip amputation when his hand was pinched by the wheel of the Bid-Well workbridge.,0
"An employee was pouring hydraulic oil into a skid steer when a trackhoe reversed into the door where the employee was standing. The door swung shut, crushing and breaking the employee's right arm.",1
"On 11/16/2016, at 3:30 PM, an employee was struck by an aircraft ground support vehicle and suffered severe head injuries.",1
An employee fell off a ladder and fractured a hip.,1
An employee's left little fingertip was amputated between a cart and a machine.,0
"While installing plywood decking to a rooftop, an employee lost his balance and fell 11 feet 8 inches to the lower level, breaking his spinal cord/back. Fall protection was not worn at the time.",1
"An employee was sweeping the floor when a bale of cotton fell on him, injuring his lower back.",1
"On November 16, 2016, an employee was retrieving parts from a new washer when his glove was caught in the chain conveyor and subsequently caught between the chain and a rotating shaft. His right middle fingertip was amputated. The chain and shaft were unguarded at the time of the incident.",0
"On November 16, 2016, at approximately 7:15 PM, an employee's left hand entered a piece of moving equipment as it was coming to a stop and was injured. He was hospitalized.",1
"An employee was attempting to adjust the handle on a case packer when he lost balance and leaned his left index finger into a pinch point, partially amputating his fingertip.",0
An employee was using a bandsaw to cut fittings when a fitting jumped and the bandsaw partially amputated his left thumb tip.,1
"An employee entered a trash cart as part of a process where a forklift operator would raise the cart off the ground so the employee could shovel trash out of the cart and into a compactor. The metal cart slid on the forks toward the forklift while the employee was holding onto the edge, and the employee's left middle finger was amputated when the trash cart made contact with the forklift apron guard.",0
"An employee was grinding on an auxiliary diesel fuel tank to fix a clog when a spark from the grinding wheel ignited diesel fumes inside the tank and it exploded. A piece of the exploding tank hit and broke his right leg below the knee, requiring surgery.",1
"An employee fell approximately 21 feet when a guardrail failed, suffering a broken right arm.",1
"An employee was climbing up the outer portion of a water station when he slipped and fell, breaking his ankle and hurting his back.",1
An employee was connecting a load bar to the roof of a manufactured home. The employee turned to get off of the roof and missed the truss he was attempting to step on. He fell and caught himself by his arms in the trusses. He sustained rib contusions.,1
"On November 16, 2016, at approximately 8:51 p.m., an employee was disposing of pieces of trim in the vacuum system of a single phase machine. The employee's left hand slipped and the ring finger made contact with the score bar. The finger was lacerated and had to be amputated.",0
"While walking down an incline in an auditorium, an employee tripped, fell, and hit their neck on the arm of a chair. The employee suffered an injury from the ear to the larynx area.",1
"An employee was washing a refrigerated container with a hose and signaled the driver to drive away. The water hose became stuck on the container as the driver pulled away. It wrapped around the employee's foot and pulled him off the dock to the ground, fracturing his back vertebra.",1
"On November 16, 2016, an employee was performing a pre-delivery check of a boom lift near electrical lines. A loud noise was heard, and the employee was found lying in the basket with electrical burns to the head, chest, and hands. The employee was hospitalized.",1
"On 11/16/2016, at approximately 11:00 a.m., an employee was checking a printing press when his left hand was caught in the roller of the press damping system. He suffered lacerations and required surgery.",1
"An employee suffered a hand burn while cleaning a deep fryer, requiring hospitalization.",1
"An employee was engaged in HVAC demolition activities on the roof. As he was attempting to push parts of the demolished HVAC unit off of the roof, his glove became stuck to the unit. He was pulled off the roof with the unit to the ground, suffering artery damage that required surgery and a cracked skull.",1
An employee was delivering a pizza in a resident's driveway when an assailant sprayed her in the face with pepper spray. She experienced difficulty breathing and an upper respiratory issue.,1
"An employee was arranging mail in the back of his parked vehicle when he was struck by a passenger vehicle, suffering a crushed left leg and fractured right leg.",1
"On November 16, 2016, employees were changing a press mold, which was being lifted by a boom attached to a forklift. The boom failed and the mold struck the injured employee, who suffered lacerations, a possible fracture, and a head injury.",1
An employee was jointing a piece of wood when his hand slipped. His pinky finger went into the blade and was amputated.,0
"While crawling through and greasing a loader, an employee's head struck the edge of the loader's bucket, fracturing the skull.",1
"An employee was cleaning the chute on a ready-mix truck. As he extended the chute, two of his right-hand fingers were caught/pinched between two chute sections.",0
"An employee was operating a stand-up forklift when his foot contacted a column, amputating four toes.",1
An employee was walking through a truck stop parking lot and was run over by a car. The employee was hospitalized for bleeding on the brain.,1
"An employee was pushing an oxygen bottle on a cart when his leg gave out and he fell to the ground, suffering an acute right hip fracture.",1
"An employee was struck by metal shelving, which knocked him to the floor. He sustained multiple head and shoulder lacerations.",1
"An employee went to his vehicle in the parking lot to retrieve some items. While walking back to the building, he rolled his right ankle and then stepped forward with his left foot to catch himself. He felt a pop in his ankle and fell to the ground. He was hospitalized for a fractured fibula.",1
"On November 17, 2016, an employee fell off a single-story roof damaging their pelvis and breaking the left arm.",1
An employee was using a riding lawn mower to cut grass when the mower turned over on a hill and broke the employee's arm.,1
A diver was removing sediment from the floor of the tank in 47 feet of water. The diver lost his weight belt and made an uncontrolled ascent to the surface resulting in an air embolism and coma.,1
"While installing a gate, an employee's left middle finger was amputated above the knuckle when the gate pinched the finger as it was being hung.",1
An employee was struck by a paving machine and suffered broken bones in his foot and leg.,1
"An employee was standing on the roof top of a truck supplying hot asphalt (400 degrees). The hot pipe became loose and had a slight leak. The employee was trying to tighten it when the pipe burst and splashed him with the hot asphalt, causing first degree burns to the face and arms.",1
"An employee was on top of a rail car loading meat bone meal. When he tried to move the auger chute, he lost his footing and fell to the ground fracturing the right leg.",1
An employee was hospitalized after breaking a hip while walking in a sewer. ,1
"An employee was changing the tire on a loader. He placed blocking under the loader after jacking it up. The jack shifted, causing the loader to fall down onto the blocking. The impact of the loader broke the employee's hip, requiring hospitalization.",1
"On November 17, 2016, an employee was operating a napkin printing press and noticed a defect.  The employee turned the machine off and felt the printing plate to see if it was lifting off the cylinder. The jog button was pressed while his right hand was feeling the plate and his hand was caught between the plate and the impression roll. He suffered an amputation of his right thumb pad and laceration to his right index finger.",0
"On November 17, 2016, an employee was lifting a glass window when it broke and sliced his left hand. He suffered a deep laceration and was hospitalized.",1
"An employee was changing oil on a tractor trailer unit when it rolled off the blocks and struck the employee, breaking 12 ribs and a shoulder and collapsing the left lung.",1
"On November 17, 2016, an employee was working on ladder approximately 10 feet high when the feet of the ladder slipped out. The employee fell to the concrete floor and suffered a broken arm and head injury.",1
A temporary employee using a table saw to cut wood. The saw blade amputated his right pinky fingertip as he was adjusting the saw guide with a hammer. The blade was not guarded at the time.,1
An employee was feeding nonferrous cable material into the cable stripping machine when their right hand was caught inside the machine amputating four fingers.,1
An employee was troubleshooting a conveyor belt on the hamburger patty line in a meat processing plant. His gloved right hand got caught in the gear resulting in amputation of the index finger.,1
"On November 17, 2016, an employee who works in plastic recovery sustained a fingertip amputation.",0
"An employee fell to the ground while repairing shingles on the roof of a private residence, requiring hospitalization for facial injuries and a torn aorta.",1
"An employee was cleaning a 4,000-pound mixer when his glove was caught in the machine, which then pulled in his hand and amputated his right middle and ring fingers.",1
"An employee was cleaning a blender when his glove was caught and pulled into the spinning auger, amputating his right ring and middle fingers. The blender was operating at the time of the incident.",1
"An employee was moving a manufactured steel part that weighed approximately 70 lbs. from a pair of saw horses to the ground. He then tripped over one of the sawhorses, and three of his right-hand fingers were pinched between the steel part and the ground, amputating his middle fingertip and injuring the other two.",0
"An employee was cutting 2x4"" lumber on a radial arm saw when the saw blade lowered on and amputated his right middle finger. The saw was guarded at the time.",0
"An employee was reversing a stand-up forklift when she extended her left arm to keep from hitting another stand-up forklift. Her left hand struck the second lift, breaking her left wrist and requiring hospitalization.",1
An employee was changing cross beams on a racking system when the right index fingertip was amputated.,1
"An employee was on a 5-foot ladder cutting a pipe used to carry nitrogen. As the employee was cutting the pipeline, the pipe (which was filled with carbon dioxide) ruptured. The employee suffered a concussion, fractured orbital bones, a skull fracture, and neck injury.",1
"An employee's hand was pulled into a spindle shaper machine, injuring fingertips and requiring hospitalization.",1
"An employee was replacing a furnace in a customer's home and was installing a PVC exhaust pipe.  The PVC pipe was to run directly over the water heater out the side of the home.  He set his PVC cleaner and glue on top of the water heater (chest height) as he put the exhaust together.  While installing the final piece, he cleaned the connection with the PVC cleaner and put the dabber back into the can. When he reached for the glue, he bumped the can of cleaner and it spilled on his chest.  He caught the can with his hand but the contents spilled on the floor. The water heater ignited vapors from the cleaner and a fire started, causing first and second degree burns to his chest, right lower arm, right neck, earlobe, left armpit, and both lips.",1
An employee was operating a press brake and attempting to remove a piece when the clamp came down and amputated his left middle fingertip and avulsed his left ring finger. The machine was cycling at the time of the incident.,0
"An employee was helping to add alloy to steel when a splash of alloy came through the door and hit his pant leg. He was kneeling at the time, so the splash ran down into his boot, causing burns.",1
"On November 17, 2016, an employee's fingers were caught in the in-running nip point of a printing press while he was attempting to thread new paper through the press. One of his fingertips was amputated and another was badly injured.",0
"An employee was standing on top of a 5-foot, 1-inch tall dock block while installing a grounding strap to a vessel shaft in a dry dock when he slipped and fell to the floor, rupturing his spleen.",1
"An employee was attempting to change the buffing blades on an automatic tire buffing machine. While he was using a wrench to remove the blade head, the machine turned on. The wrench became entangled in his clothing and pulled him into the machine, breaking his right wrist and lacerating his right forearm, bicep, and leg. The machine was not locked out at the time of the incident.",1
"Around 1:00 p.m. on 11/18/16, an employee was leaving the repackaging station when she tripped over a metal piece of the rolling warehouse steel. She fell on her right hip and was unable to get up and walk, requiring hospitalization.",1
"An employee was replacing a splicer case on a telephone strand while working  from a ladder. The employee then fell approximately 15 feet while descending, breaking the left ankle.",1
"An employee was working from a ladder when it slipped and he fell to the ground, breaking his pelvis, elbow, and wrist.",1
"An employee was delivering a scissor lift to a location. As the employee was unloading the scissor lift, the scissor lift's wheel went off the edge of the ramp, causing it to start to fall. The employee jumped from the cab of the scissor lift to avoid the fall and broke his right leg.",1
An employee suffered a right thumb amputation while working on a horizontal lathe.,1
An employee contacted a capped wire while installing radiation panels. The employee was hospitalized.,1
An employee on a center rider was about to start filling an order when a box of mangoes fell off a rack and struck him. He suffered a fractured right shoulder and was hospitalized.,1
An employee fell from a 9 foot ladder to the concrete floor breaking the right hip and shattering the left knee.,1
"On November 18, 2016, an employee was delivering a package to a residential home when she stepped into a hole and fell to the ground, fracturing her hip and requiring surgery.",1
An employee was part of a rigging crew tasked with using an overhead 8-ton crane to move a heat exchanger through two columns. The employee pushed the exchanger through by hand and it swung back and struck the employee's left index finger and thumb. The employee was hospitalized for surgery.,1
An employee was cleaning an exhaust flue and was exposed to sodium hydroxide. He received a chemical burn on his right arm.,1
An employee was injured when he tripped over tin studs.  ,1
An employee sprained her right ankle while chasing after a student.,1
"An employee was adjusting a C5 slide core on his work table and was resting it on a 2x4. The 2x4 rolled up, pinching and crushing his right middle fingertip between the table and core. His fingertip had to be medically amputated.",1
"An employee was standing inside a 2-foot high box. When she stepped back, the back of her feet hit the inside of the box, causing her to fall backwards and hit her head and back. She suffered eight fractured ribs and a vertebra fracture.",1
"An employee on an electric pallet jack collided with a coworker on an order picker, suffering a fractured forearm and requiring hospitalization.",1
An employee was building a scaffold and while bending over he fell from the scaffold.,1
"On November 18, 2016, an employee was hospitalized after falling from a step ladder and breaking their back.",1
"An employee was opening the doors of a semi tractor trailer when a stack of wooden pallets fell and struck her head, left shoulder, and left leg. She suffered a gash on the left side of her head and was hospitalized.",1
"While working in a straight boom lift that was 5 feet off the ground, an employee bounced out of the bucket. The employee's harness stopped the fall, but the employee suffered torso and rib injuries.",1
"An employee was installing a rotor lock pin in a bearing housing when the magnets in the lifting system failed. The rotor lock pin then dropped into the bearing housing, pinching the employee's fingers between the flange of the pin and the housing. Two of his fingers were amputated to the first knuckle.",0
"An employee slipped and fell on water that had dripped onto the floor from a wet shower bed, breaking his left knee and requiring hospitalization.",1
"An employee was helping a three-man crew with a backhoe to lift a walk-behind saw approximately 6 inches and move it forward approximately 3 feet. The employee attached rigging from the walk-behind saw to the backhoe and stood to the side of the forks approximately 4 feet away. As the backhoe operator lifted the saw, the backhoe forks disengaged and struck the employee's hard hat. The employee was hospitalized for a head injury.",1
"An employee was operating a sit-down forklift to stack large bundles of flat corrugated boxes in rows. A row of bundles started to fall in a domino fashion, striking and then tipping the forklift over from the employee's right to left side. His left foot was pinned under the forklift and several bundles of boxes fell on top of him. He was hospitalized with a fractured left foot.",1
"An employee was welding burner tubes when his shirt caught on fire, causing second degree burns to his torso that required hospitalization.",1
"An employee was walking on a catwalk while sanitizing a de-stoner machine when he tripped and fell, landing on the edge of the de-stoner guard on the platform below. He lacerated his left forearm.",1
An employee was cutting cardboard to make a work mat for his desk when his pocket knife slipped and lacerated his right arm.,1
"An employee slipped while descending the steps, reached outward, and caught their left ring finger on one of the traction rings amputating the tip of the fourth left digit.",1
An employee was helping to assemble a standard duty wrecker and was in the process of guiding a part into position when a component inside of the part shifted and pinched/partially amputated the employee's finger between two sections.,0
An employee was offsite and inhaled fire extinguisher powder while extinguishing a fire resulting in inflammation of the lungs.,1
"An employee was trimming a tree limb that was touching a powerline. When he grabbed the tree limb, he made indirect contact with the powerline, suffering third degree burns to both hands and his right leg.",1
"An employee was operating a radial arm saw when a piece of wood became caught in the travel slot behind the saw blade. When the employee attempted to remove it, the blade lacerated his right index finger. His fingertip had to be surgically amputated.",0
"A brace holding up a tilt wall sheered off and swung out of place, striking an employee in the legs.",1
"An employee was climbing a wooden ladder with a string of lights over his shoulder. When he reached the top of the ladder, he attempted to grab the rail but missed and fell approximately 20 feet, lacerating the side of his face and head and breaking his wrist.",1
An employee was pulling debris out of the cutter machine when the blade crushed and broke his right hand. The machine was activated at the time of the incident.,1
"An employee was unbanding a load of steel that had a wooden 4x4 block in between it. The steel band snapped and the steel hit the extra length of wood, causing it to fly up and hit the employee in the face. The employee was hospitalized.",1
"An employee's hand entered the entrance section of a jammed conveyor that was being fixed, partially amputating her left middle finger.",1
An employee was picking kohlrabi and using a knife to cut tips and amputated the tip of their thumb.,1
"An employee was in the process of preparing a coal fired boiler section to be dumped. The employee stopped the coal feed to the section in preparation and as he approached the front of the boiler, the boiler went positive. In this instance, the door to the section that was being prepared to dump, blew open and the employee was blasted with a fire discharge. The employee received multiple first, second, and third degree burns to the arms, legs, torso, and face.",1
An employee was walking between a patient's stretcher and computer when she tripped on a rolling stool. She fell and fractured her right arm.,1
"An employee was operating the board edge unscrambler when he noticed a stick had become jammed beneath the floor chains. When he attempted to remove it, his shirt was caught on a chain lug that then pulled his left arm into the machine, amputating his left ring fingertip, crushing his left hand, and injuring his left arm. The machine was running at the time.",1
An employee was positioning a wind brace and connecting a mast to a work platform. He fell back on his lanyard and his upper arm was caught in a pinch point between the mast and the wind brace.,1
An employee was operating a forklift when the fork extension of a second forklift struck and fractured the employee's ankle.,1
An employee's left index fingertip was amputated by a closing freezing door.,0
An employee suffered a right index finger amputation while operating a table saw.,1
"An employee was visually checking a rope that was pulling a conductor from an underground application through a block. As he turned to walk away, he put his arms down to his side. The rope caught the tip of his left-hand glove and pulled his fingers into the block. His left ring and pinky fingers were amputated.",0
"An employee pulled his semi and trailer off to the side of a service road close to a ditch.  The tractor and trailer began to lean over. When the employee exited the cab, he fell to the ground and injured his head, neck, and shoulder.",1
"An employee was bending over picking up debris in the dock area and was struck by forklift. His head hit a metal guard rail. The employee was hospitalized for head, neck and back injuries.",1
An employee was working from an aerial lift and cutting a tree limb. The tree limb fell towards him and pinched his arm between the end of the limb and the aerial lift bucket. His right upper arm was lacerated and required surgery.,1
An employee tripped and fell over a curb rupturing their spleen.,1
"An employee was attempting to free wire that was hung up in a dolly. When the wire was freed, it pulled his left hand into the dolly, partially amputating his left pinky finger.",0
"On November 20, 2016, at 2:30 p.m., an employee suffered a partial amputation to the left middle finger while attempting to retrieve bread that was stuck in a bagel machine.",0
"While attempting to remove a steel piece from a forklift, a temporary employee's left finger was caught and amputated between the fork and another piece of metal.",0
"An employee was cleaning a bathtub when she slipped and fell, fracturing her hip. She was hospitalized and had surgery.",1
"An employee was using a toxic vapor analyzer to monitor a carbon canister for fugitive emissions. The employee lost consciousness due to potential exposure to dimethyl disulfide, requiring hospitalization. Respiratory protection was not worn at the time of the incident.",1
"An employee was walking to his truck when he slipped on ice in the parking lot and fell to the ground, breaking his right fibula in two places and dislocating his ankle.",1
"An employee was removing tangled film from a roller in a laminator machine when he stepped back into a roller that was still running, fracturing his skull and breaking an arm.",1
"An employee was lubricating a drive chain on a conveyer when his rag and hand were drawn into the chain and sprocket, partially amputating his finger.",0
"An employee was climbing a ladder to a roof when his foot became tangled in the ladder and he fell 8 feet, breaking his ankle.",1
"An employee was using a portable hydraulic tool to separate flanges on a hollow flight auger. During separation, the tool slipped off the shim, causing the shim to hit the employee in the face. The employee suffered fractured facial bones.",1
An employee was performing maintenance on a material handling conveyor system when his right index finger was amputated above the first joint.,0
"An employee was cutting a concrete foundation to install an egress window when a piece of concrete broke off and landed on the employee's leg, breaking it.",1
"An employee tripped on the forks of a forklift while attempting to remove a plastic cover from a pallet of merchandise, suffering a fractured hip.",1
"An employee was attempting to remove the shaft stock in a machine when the stock slipped and crushed his index finger, requiring surgical amputation.",1
"An employee was carrying materials to his car when he missed a step, tripped, and fell, fracturing his wrist.",1
"An employee was removing a scaffold around a chimney when wind caught the scaffold plank, causing the employee to fall 16 to 18 feet to the ground below.",1
An employee was driving when he struck a disabled motor vehicle and sustained several cuts and fractures that required surgery and hospitalization.,1
"An employee slipped and fell, hitting her head on the side of a produce rack and suffering a brain hemorrhage.",1
"An employee was removing excess tuna from the rear of a filler machine when her right hand became caught in the star wheel (carries empty cans to the filler machine). Her middle and index fingers were amputated, and her right hand suffered multiple fractures.",0
"An employee was trying to move a piece of wood that was stuck in the chain when the wood jammed his hand into the steel railing, amputating his right middle finger and breaking a bone.",1
"An employee fell to the ground while walking down the stairs from a loading dock to a snowy/icy parking area, suffering a broken back (in two areas) and a neck injury.",1
"On 11/21/16 at 15:30, an employee was struck by a piece of machinery that transports bars, suffering right hip and right side injuries.",1
"While accessing the roof, an employee slipped and fell approximately 10 feet, bruising his back and knee. He was hospitalized and had surgery.",1
An employee's thumb was caught and partially amputated in a closing bagger machine door.,1
"An employee was operating the forklift in the yard. When he made a turn to return to the building, the forklift tipped over and rolled onto his foot.",1
An employee suffered burns to the face when an arc flash occurred while he was working on electrical lines. He was hospitalized.,1
"An employee fell from an unknown height to the ground, breaking both ankles.",1
An employee was operating a high-reach forklift to move product when the employee's left thumb was caught and partially amputated between a section of racking and the forklift's support beam.,0
"During polishing activities, an employee's left index finger was caught by a shaft and had to be amputated.",1
"An employee was moving a part (about 12""x18""x1"" thick) by hand from a pallet to a work table. His right thumb was inside a hole in the part. As he pulled the part, the hole closed, amputating his right thumb tip.",0
An employee was performing maintenance on the wing of an aircraft and fell to the floor fracturing the right side of their body. The employee was not attached to the SRL at the time.,1
An employee was directing a powered industrial truck (PIT) operator on how to load onto a tractor trailer when the PIT operator reversed and pinned the employee between the PIT and the tractor trailer. The employee suffered a right lower leg injury.,1
An employee tripped over a chair in the automotive store while attempting to put the delivery vehicle keys away. The employee fell to the cement floor and suffered a broken left hip.,1
"While walking through the lumber yard, an employee's foot was run over by a forklift, breaking it.",1
An employee was refueling a passenger bus that was not properly parked. The employee slipped on ice and fell in front of the rolling rear wheels resulting in crushing injuries to the lower abdomen.,1
An employee was rebuilding shafts and bearings on a slicer and amputated his left pinky finger when it was caught in the machine.,0
An employee was using an electric torque gun to tighten bolts when his right thumb was caught and partially amputated between the gun and the steel.,0
"On November 21, 2016, at approximately 9:00 a.m., an employee slipped and fell on ice on the concrete walking surface, suffering a concussion and neck/back pain. The employee was hospitalized.",1
"An employee was attempting to clear a piece of poly from a running machine when his fingers were caught in the machine. His fingers were cut and his left thumb was badly damaged, requiring surgery and hospitalization.",1
An employee was sliding T-beams from a staging area to a forklift when a beam pinched and amputated his left fingertip.,0
An employee suffered a partial amputation to the right index finger while cleaning a drive chain on a band saw while the machine was in operation.,0
An employee and a coworker were handling knives in the kitchen when the coworker accidently lacerated the employee's leg.,1
"An employee was using a sliding hammer to remove injectors from a farm implement when the employee's left thumb was crushed between the handle and the top of the tool, amputating the tip.",0
"An employee fell from a work platform to the ground, fracturing his right tibia.",1
"An employee fell out of a truck trailer, breaking three ribs and puncturing a lung.",1
"An employee was working at a pipe beller machine when the beller ring clip came loose. The employee was attempting to put the ring back on when the machine cycled, catching the employee's palm and thumb between the ring holder and the beller frame, requiring stitches. The employee was  hospitalized and had surgery the following day. The machine was guarded, but not locked out at the time of the incident.",1
"An employee drove a van to transport a group of consumers from the care facility to a store parking lot. The employee was sitting in the van when an agitated consumer bit and hit the employee's head. The employee suffered a concussion, bite, and pain in the right shoulder, requiring hospitalization.",1
"An employee fell approximately 5 feet off the back of a delivery truck to the ground, suffering a broken tailbone and concussion. The employee was hospitalized.",1
"On November 21, 2016, an employee was walking in the cabin of a plane in the aircraft interior repair shop when he stubbed his toe on a first class seat. His toe became infected with a suspected hairline fracture and required hospitalization on November 22, 2016.",1
An employee's right hand was caught in the printer rollers resulting in amputation of the middle finger at the first digit.,1
An employee was cleaning their hands with a shop rag and got a steel splinter in their hand. The splinter required surgery.,1
An employee fell off a ladder and suffered fractures.,1
"On November 21, 2016, an employee was observing a new utility pole that was being moved when the pole suddenly jerked left and struck the employee. The employee suffered a fractured left leg and contused right leg, requiring hospitalization.",1
An employee was attempting to clean molten sulfur from the inside of a rail tank car with a pressure washer when he was exposed to an off-gassing of the molten sulfur. He was hospitalized with burns to his lungs.,1
"An employee's gloved hand was caught in the rotation fan of a welder unit during repairs, amputating the thumb.",0
"An employee was pulling wire when his pinky finger was pinched between equipment and wood, tearing a ligament.",1
An employee suffered a left index fingertip amputation while using a ribbon cutting machine.,0
"On November 21, 2016, at 12:00 p.m., an employee was walking between a vehicle and the building when the employee slipped on an icy parking lot surface and fell onto the vehicle's trailer hitch, suffering three fractured ribs, a bruised abdomen, and pain in the neck and shoulder.",1
"An employee fell on concrete pavement while walking from one building to another, requiring hospitalization for injuries to the hand/arm and leg.",1
An employee was struck by falling countertops that fell from an unevenly stacked pile that became unstable. The employee suffered a broken lower leg.,1
"While walking through the upper level of a facility, an employee fell approximately 10 feet through a vent hole in the floor, suffering a broken left knee and broken left wrist.",1
"On 11/21/2016, an employee and his supervisor were washing a vehicle together on a track. When the supervisor turned on the track to begin moving the vehicle, the employee was still washing the rim. As soon as the rollers popped up, the moving wheel of the car lacerated the employee's right-hand finger and amputated it at the first joint. PPE was not worn at the time of the incident.",0
An employee was working on a boat and fell while descending the ladder breaking the left radius.,1
"An employee was standing on a 6-foot ladder troubleshooting a light fixture when he lost his balance and fell off the ladder, suffering a subdural hematoma.",1
An employee was cutting meat with a band saw and amputated his right thumb at the first knuckle.,0
"An employee was dressing a grinding wheel with a rag when the rag became caught in the wheel. The employee's left hand was then pulled into the grinding wheel, amputating the index finger and lacerating the third, fourth, and fifth fingers.",0
An employee fell while installing solar panels on a residential roof and required hospitalization.,1
An employee was standing on a trailer to pull down the roll-up door. It was raining and the employee slipped and fell which caused the door to come down on his left hand amputating the left middle and ring fingers at the first joint.,0
An employee was blowing off a router bit with an air gun and lacerated the left hand and pinky finger. The brush guard was in place at the time.,1
"An employee was repairing a chain hoist when his right index finger was caught between the chain and sprocket, amputating his fingertip.",1
"An employee stood up quickly, hit his head on a cross beam, lost consciousness, fell to the floor and had a seizure. 

He was hospitalized.",1
An employee was bolting up a 10 inch pipe. He put his hand under the valve and the valve and pipe rolled over his right hand and crushed it.,1
"An employee was administering medication when a patient kicked her. She fell backwards against the wall, breaking her hip.",1
"A pallet was jammed at a pallet magazine discharge area. An employee attempted to unjam the pallet using a hook attached to a rod about 36 inches long. When the hook did not work, the employee grabbed the pallet with her hands. At the same time, the machine cycled the next pallet in place, causing the pallet that she was grabbing to raise. Her left thumb became caught between the pallet and the metal frame of the machine, amputating her thumb tip.",0
An employee was cleaning a rib cage when his arm became stuck in two rollers that are designed to crush chicken bones. His left arm broke in multiple places and had to be surgically amputated above the elbow. The crusher was not locked out at the time of the incident.,0
An employee was feeding wire from one roll to another. While guiding the wire his gloved hand got caught and amputated two digits.,1
An employee slipped on the ice and fell down stairs breaking two ribs and injuring their back.,1
"An employee was riding a tug as a passenger. When the driver turned a corner, the employee fell off the tug to the ground, breaking his forearm.",1
"On November 22, 2016, at approximately 8:00 a.m., an employee was using a floor-operated overhead crane to lift a gear unit. The fine thread eye bolts that secured the load to the chain sling became stripped and allowed the load to fall onto the employee, causing a fracture and nerve/artery damage.",1
"An employee working at a conveyor line was trying to remove a can from underneath a pallet. A forklift driver did not see her and delivered the next pallet, which pushed the pallet that was staged on the conveyor. The employee's ankle was pinned between the pallets and a support beam on the conveyor, and she suffered compound fractures to her tibia and fibula.",1
"An employee was tightening a ratchet strap on a flat bed. The handle got away from him while under pressure and swung up, hitting him in the face. He was hospitalized with a broken jaw, nose, and tooth and a possible concussion.",1
"An employee was carrying pot of hot grease when he slipped and fell. The hot grease spilled on him, causing third degree burns to his arms, chest, neck, leg, and back.",1
"An employee was making sure that packages did not fall off the unload belt when a flat package slipped between the unload belt and a transfer plate. When he attempted to retrieve the package, his glove became caught on one of the belt rollers, pulling his hand between the roller and a piece of angle-iron located near the belt. His right hand was crushed, especially his right ring finger.",1
"An employee was operating a sandblaster when the hose dropped on his legs. The blast media came out of the nozzle and deeply lacerated his left calf, requiring hospitalization.",1
An employee was troubleshooting a conveyor and amputated the right thumb.,1
An employee was loading out components of a stacked drilling rig when a beam flipped over and struck the employee. The employee suffered a broken leg and fractured ribs.,1
"An employee was removing gas lines from chlorine gas tanks when a small quantity of chlorine gas escaped from one of the lines, causing the employee to experience respiratory irritation.",1
An employee was checking emergency lights when he fell from an extension ladder and fractured his ankle.,1
An employee suffered a left thumb amputation while cutting wood on a table saw.,0
"An employee was re-entering the facility from the parking lot when the wind forced the door closed, slamming it on and amputating his right index fingertip.",0
An employee partially amputated the left index and middle fingers while using a 24-inch hook to reach the drum de-boner auger.,1
"An employee was entering the cab of a bulldozer. Upon opening the door, his hand slipped off the handle, causing him to lose his balance and fall off the bulldozer. He suffered minor lacerations to the head, a dislocated right finger, and a fractured or cracked sternum, requiring hospitalization.",1
"An employee was working with replacement belts when the belts tightened around his right-hand middle finger, partially amputating his fingertip. The machine was not locked out at the time of the incident.",0
An employee fell approximately 11 feet off the roof and was hospitalized with broken legs.,1
An employee was investigating an unknown noise in a laboratory jar roller machine when his right index fingertip was caught in the machine's drive chain.,1
"An employee was packaging components as they came off the press when his glove was snagged on the hexagon-shaped component of the conveyor, amputating the tip of his left index finger from the fingernail to the first knuckle.",0
"The employee was feeding trays on a conveyor system when her right hand got caught in the rollers, causing a partial amputation of the right ring finger.",1
"An employee fell from the fourth rung of a step ladder to the floor, fracturing her elbow.",1
"On 11/23/2016, at approximately 1445, an employee was cleaning a straightener machine when his hand became caught in a portion of the machine, partially amputating his left ring fingertip.",0
"On November 23, 2016, at 3:10 AM, an employee was troubleshooting a bagger machine when the employee's arm became caught in the door, breaking a forearm bone.",1
"An employee tripped and fell while climbing over a conveyor, striking the wall and suffering a shoulder injury.",1
"An employee was performing maintenance on an overhead conveyor roller when a shaft dropped out of a roller and pinched his finger between two plates, amputating his left index fingertip.",1
"An employee was on a ladder putting tape on a wall for a painting when he fell, breaking his tibia and fibula.",1
An employee suffered a hand crushing injury requiring surgery and hospitalization while cleaning the filter press.,1
"While standing on a 4-foot ladder to pull a box from a shelf, an employee lost his balance and fell onto a cement door stop pile-on, suffering broken ribs and a collapsed lung.",1
"An employee had finished loading baggage onto an aircraft when he tripped and fell, hitting the pavement.  He suffered broken bones near his eye socket and sinuses, knee abrasions, and swollen hands.",1
"On 11/22/16, an employee was cleaning a glue roller with a scraper when the employee's right-hand middle finger was caught between glue rollers. The fingertip had to be surgically amputated.",0
"While cleaning dust off equipment, an employee fell off a 6 foot ladder and fractured left side ribs.",1
An employee suffered a broken left arm when a large tool being unloaded from a forklift rolled onto his arm.,1
An employee was using a 10-inch chef's knife to slice salmon. The slicing motion pulled the knife through the salmon and amputated the employee's fingertip.,0
"On November 23, 2016, at approximately 7:30 p.m., an employee began feeling sick and experienced breathing difficulty, headaches, and migraines due to carbon monoxide exposure, requiring overnight hospitalization.",1
An employee was inching the ram down on a press when the plastic die spacer shot out and broke the employee's right arm.,1
"An employee fell to the floor as she was walking toward the elevator, fracturing her spine.",1
An employee was helping to move a large rack of blades out of a spray booth when a part fell and struck the employee's hand between the thumb and index finger. The employee was hospitalized with a hand fracture.,1
"An employee was working from a 14-foot boom lift, setting up a wire pool and trying to place it in a sheave, when he lost control and his right arm was caught between the wire and the railing of the lift, breaking it.",1
"An employee was descending a fixed ladder from the sorter to the main floor when her foot slipped and she fell approximately 5 feet to the floor, fracturing her right leg.",1
An employee was attempting to step over a tow bar between mail carts when her foot was caught on the bar. She fell to the floor and fractured her knee.,1
"An employee crossed the street to retrieve shopping carts. While crossing back with the carts, the employee was struck by a moving vehicle, suffering a broken arm and leg.",1
"An employee was retrieving a small LCD TV from the top of a shelving unit. While descending the ladder, he missed the last step and fell to the floor, breaking his left leg.",1
An employee fell 20 feet from a scaffold while helping to build a wall for an elevator shaft. The employee landed on concrete and suffered five broken ribs and a collapsed lung.,1
"An employee had been removing ceiling ductwork from an 8-foot step ladder. When he stepped off the ladder, he rolled his ankle and fell. He tried to brace himself while falling and extended his hands. He suffered a compound fracture of the ankle and a broken wrist.",1
An employee was using an angle iron when it moved downward toward the vise and amputated the employee's left ring fingertip.,0
"An employee and a coworker were closing the perimeter gate at the end of the day when he stopped to remove some cardboard that was blocking the gate. His coworker kept pushing the gate and the employee's second finger became stuck in the gate rollers, amputating his fingertip.",0
An employee was heating an asphalt product with a propane torch to close a lid on a tank when a flash fire occurred. The employee suffered second degree burns to the hand and first degree burns to the face.,1
"On 11/23/16, at about 12:30 p.m., an employee was working on a trash compactor and caught his right leg fracturing the shin. He was taken to hospital where he received surgery.",1
"An employee's right hand was crushed, breaking several bones.",1
"An employee tripped over debris on the floor, fell, and fractured her knee.",1
"A forklift with a nylon sling was loading counterweights when the sling failed, allowing a counterweight to fall and strike an employee's left leg, breaking it.",1
An employee was inserting a blank piece of pipe into the chucks of a CNC machine when the blank fell and his right finger was caught between the blank and the metal bar inside the machine. His right ring fingertip had to be surgically amputated.,0
"A temporary employee attempted to remove dunnage from on top of a bundle of rebar when a bundle shifted and struck his left shoulder/arm area, fracturing his left hand and left leg.",1
An employee was unloading an oil drum and fell off the back of the truck resulting in a serious head injury and hospitalization.,1
"On November 23, 2016, at 12:30 a.m., an employee was repairing a conveyor belt when he needed to use oil on the chain. When he turned on the power, his left ring fingertip was amputated.",1
An employee was sitting on a forklift when another forklift struck his left foot.,1
"An employee was entering the bathroom when a malfunctioning hinge caused the door to slam shut on her left-hand ring finger, amputating the fingertip.",1
"An employee was emptying a hopper at 6:40 AM when the hopper flipped back and hit the employee's wrist and forearm, requiring hospitalization and surgery.",1
"An employee was operating an irrigation machine when he was struck in the head/face by a rotating boom, breaking his jaw and losing consciousness.",1
An employee suffered a hand laceration while using a saw to cut material.,1
"An employee was washing a personal transportation vehicle when she slipped on a soapy patch, struck the ground, and broke her right wrist.",1
"On November 25, 2016, an employee fell in the locker room and broke a femur, requiring hospitalization and surgery.",1
"An employee was struck by a motor vehicle driving approximately 35 miles per hour. He hit the car's windshield and was then thrown approximately 30 feet, suffering a broken leg, three broken ribs, and multiple facial lacerations.",1
An employee was delivering a package to a customer when the customer's dog attacked and partially amputated the employee's left ring finger.,0
"An employee slipped or fell on stairs while going to a tank yard, suffering a twisted knee.",1
"An employee was pulling cardboard on a pallet when the cardboard tore, causing her to fall to the floor. She suffered a wrist and possible hip injury, requiring hospitalization.",1
"An employee was making an adjustment to a blow mold machine when a tool slipped from his hand and caused him to lose his balance. His left hand then came in contact with a mold part, amputating his index and middle fingers at the knuckle and his ring fingertip.",1
"An employee was working in an aisle when a forklift operator driving down the aisle pushed a pallet into her, striking her left ankle.",1
An employee lost control of a pallet jack while backing up and was pinned between the pallet jack and a racking system. The employee suffered a muscle injury and was hospitalized.,1
"An employee was running a piece of wood through a wood edger machine when an excess piece (called a stick) was created. The employee turned off the machine to retrieve the stick. As he reached for it, the machine's saw blade lacerated his left hand and forearm, requiring hospitalization.",1
"An employee was walking back to a vessel to verify the lashing when he slipped and fell, breaking a rib.",1
"While working on a ship's radar, an employee fell after a rusty safety ring gave way. The employee suffered a hematoma to the head.",1
"While installing plywood covers over the stairwell opening of a new two-story residence, an employee fell approximately 9 feet through the opening from the second level of the home to the concrete floor, fracturing the neck, hip, and two ribs.",1
"While working on the 1st floor mezzanine installing structural steel, an employee was struck in the head by a steel beam and required hospitalization.",1
"An employee was leaving a patient's home. As she stepped onto the outside step, it broke and she fell 4 feet onto a cement slab, suffering internal injuries. She was hospitalized and required surgery.",1
"An employee was standing on top of a plywood sheet to reach for something when he slipped and fell. The plywood sheet then fell onto his fingers, fracturing and lacerating them. His fingertip had to be surgically amputated. The plywood was not secure at the time of the incident.",0
"On November 25, 2016, at 2:30 PM, an employee was watching a coworker set up a die in a full revolution mechanical power press when the employee's left hand entered the top ejection post that was attached to the platen. The coworker then jogged the machine and the top rod crushed four fingers on the employee's left hand. The middle and ring fingers had to be medically amputated below the first joint.",0
"An employee was being lifted in a powered industrial truck cage to conduct inventory. The cage fell to the ground when it reached the third tier of the racking system, which was about 25 feet high. The employee hit the ground, sustaining facial fractures and bruised ribs and lungs.",1
"An employee was walking in a hallway when she fell forward and struck her face, nose, lips, and the side of her body on the floor.",1
An employee was repacking a pump when his right-hand pointer and middle fingers were amputated. The pump was not locked/tagged out at the time.,0
"An employee was inflating an inboard tire mounted on the rear of an RV when the tire exploded. The employee lost consciousness and suffered right shoulder pain, hearing loss, and blurred vision.",1
"An employee was cleaning the glass above a steam table while standing on a stainless steel table. The employee then slipped and the left foot fell into a hot water well. The employee suffered first, second, and third degree burns to the left foot up to the ankle.",1
"An employee was working from a ladder on a roof, installing a heating and air conditioning unit, when he fell 20 to 25 feet to the concrete driveway below, cracking his pelvis and ribs and requiring hospitalization.",1
"An employee was cleaning an uncut noodle off the blade of a noodle-cutting machine when the blade cut the back of the employee's left hand, requiring surgery. The machine was running at the time of the incident.",1
An employee was working at a sausage stuffing machine. She had placed an empty sausage casing on the horn of the machine and was feeding it to the chuck when the machine was activated. Her right index fingertip was caught and amputated between the chuck and horn.,0
An employee was dismounting a ladder and missed the last step. The employee fell to the floor breaking their knee cap.,1
"An employee was driving a stand-up forklift down the main travel aisle in the warehouse when he struck some racks. His left foot became caught between the racks and the forklift, sustaining a laceration that required hospitalization.",1
"An employee was adjusting the alignment on a case erector head. He activated the emergency stop and raised the head to the horizontal position, creating a pinch point that amputated his right pinky fingertip.",0
An employee was walking to his car when he fell in the parking lot. He suffered a head laceration and was hospitalized.,1
"An employee was operating a powered industrial vehicle in a freezer area to fill orders. When he dismounted the vehicle, it continued to move (coasted) and ran over his right foot, lacerating the bottom of his foot and tearing tendons and ligaments in his big and middle toes.",1
"An employee was unloading caustic from a truck using a hose. When he disconnected the hose, he was chemically burned by the caustic solution.",1
"An employee fell to the floor while getting into the cab of a truck, suffering a fractured hip and requiring hospitalization.",1
An employee was held at gunpoint while taking the store's trash out at 12:02 a.m. The armed robber forced the employee back into the store and shot the employee in the abdomen.,1
"An employee was using a pole pounder to pound stakes in when the employee's right glove became snagged and the pole pounder fell onto the right index finger, amputating it.",1
"An employee was calibrating the temperature for steam on a kettle. His coworker did not know he was calibrating the kettle and poured the hot water out of the kettle, splashing the employee's leg and causing second degree burns that required hospitalization.",1
"An employee was trying to close the back door, which was not closing properly. When she forced it closed, it slammed on her left little finger and amputated the fingertip.",0
"An employee was unhooking a tractor trailer from a dolly when his finger was caught between the dolly and the tractor trailer, amputating his left pinky fingertip.",0
"On or about November 28, 2016, at approximately 1:40 a.m., an employee was loading a new roll of plastic film on a winder machine when his left hand was pulled into a nip point. His lower left arm was fractured and required hospitalization.",1
An employee was picking recyclable waste from a conveyor belt and placing it in the appropriate bins when the employee's left pinky finger became caught and amputated between the belt and the metal portion of the shoot.,0
"An employee was operating a table saw to cut backing material when the material became snagged and pulled his right hand into the saw blade, lacerating his middle and ring fingers. The saw was unguarded at the time of the incident.",1
"An employee was connecting wires to a switchgear when an arc flash occurred, burning the employee's head and shoulders.",1
"An employee fell off a scissor lift that was approximately 12 feet high, breaking both heels and a vertebra.",1
"On 11/29/2016, at 4:00 p.m., an employee was in the machine room when he saw debris on the sheave where the elevator cables wrap around. He started to clean the sheave using a screw driver. When the elevator started to move, the cable caught his left hand and pulled him, causing him to tip over and fall to the ground. He sustained three finger amputations on his left hand, broken teeth, and lacerations to his face, requiring hospitalization and surgery. The elevator was not locked out at the time of the incident.",1
"While giving vaccinations to a cow, the cow kicked, causing the syringe to enter the employee's right forearm.",1
"An employee was reaching for a box while standing on the second step of a three-step ladder when she lost her balance and fell, fracturing her left hip.",1
"An employee's finger became stuck in a door jamb after the door closed on it. When he pulled away, his right pinky finger was de-gloved and had to be amputated to the first joint.",1
An employee suffered left ring and middle fingertip amputations while cutting sheet metal with a mechanical shear.,0
Two employees were switching circuits in a circuit breaker when an arc flash/blast occurred. They were running from the blast when an oil-filled transformer exploded burning the employees. One of the employees was hospitalized due to the burns.,1
"An employee was driving a powered pallet jack down an aisle and maneuvering between pallets when he ran into a rack, pinning and breaking his leg.",1
An employee was operating an order picker. The order picker tipped over and the employee suffered a head injury.,1
An employee was descending an extension ladder after measuring a sign when it kicked out from under him. He fell and injured his head and knees.,1
"A box slid off a fork truck and knocked another container into an employee, pinning him against a scissor lift. He suffered internal injuries.",1
An employee suffered hand lacerations and fractures while cleaning cheese-making equipment.,1
An employee on a ladder was attempting to adjust a hydraulic press when the press opened and caught/crushed the employee's right thumb in a pinch point.,1
An employee was walking through the yard when concrete slurry leaked into his boot and caused cement burns (corrosive) to his right foot.,1
"An employee placed a pallet of material on a platform with a forklift and then backed the forklift up to the platform gate. When the employee reached out of the lift to shut the gate, the index and middle fingers were crushed between the gate and the forklift cage. The employee's middle finger was partially amputated.",1
An employee was helping a coworker who was using a sledgehammer when the sledgehammer ricocheted and hit the employee's face. The employee was hospitalized with head trauma.,1
An employee was preparing to clean the ink tray of a printing machine when he stumbled and put his left hand out to catch himself. His hand entered the machine's unguarded rollers and was de-gloved.,1
"An employee was drilling a bushing out of a part when his glove was caught on the rotating drill, pulling his hand into the drill and amputating the right index finger and middle fingertip.",0
"An employee was on a ladder removing a bolt with a wrench when it slipped off the bolt, causing the employee to fall and suffer a compound fracture of the ankle.",1
"An employee lost their balance and fell off a ladder while cutting branches, landing on the right side.",1
"An employee was setting up bottling equipment when hot water from a leaking line clamp splashed his stomach, causing second degree burns that required overnight hospitalization.",1
An employee was shot while on the job.,1
"On 11/28/16, an employee on a ladder fell to a cement patio floor while handing a pipe boot to a coworker on the roof. The employee suffered a brain hemorrhage and several broken ribs, requiring hospitalization.",1
"On or about November 28, 2016, at 12:25 AM, an employee was trying to dislodge a metal I-beam from a skid of wall boards. When he pulled to dislodge the I-beam, it separated from the wall boards and came down on his right hand, amputating his middle fingertip.",1
An employee was unloading his trailer when it tipped over and amputated his lower left leg.,1
"On 11/28/2016, an employee was unloading a 53-foot trailer using a forklift. As he was attempting to enter the trailer, the tractor and trailer rolled forward, causing the forklift to fall to the ground.  As the forklift was falling, the employee jumped out of it and hit the ground, breaking his hip and requiring hospitalization.",1
An employee was removing snow from a tarp covering a trailer when the spring loaded tarp arm shut and caught the employee's finger resulting in a fingertip amputation.,0
"An employee was operating the shrink wrap machine. As he was lowering the stretch wrap to the bottom of a pallet, his left ring finger was caught by the spinning plate that the pallet was sitting on. His finger then became caught in the machine and was amputated.",1
An employee was using a backhoe to lay down a steel beam when the beam broke through the backhoe's glass window and struck his left kneecap. He was hospitalized with a broken left kneecap.,1
An employee was removing a goose neck from a die casting machine when the chain sling hook crushed his index fingertip. His fingertip had to be surgically amputated.,0
"An employee fell to the ground while working from a ladder, injuring his back and requiring surgery.",1
"An employee was greasing the chain on an edge banding machine when her rag and gloves were pulled into the machine, which then amputated her left middle and index fingers. The machine was not locked/tagged out at the time of the incident.",1
"An employee was driving a golf cart on muddy pavement. As he was turning left, the golf cart slid and he fell out. The cart's back tire then ran over his right shin and broke it, requiring hospitalization.",1
"An employee was laying on an inclined catwalk 30 feet above the ground to observe repair work on a beltline conveyor system below. As he positioned himself to stand up, he fell through the mid-rail and toe board of the catwalk, hitting the belt and the ground. He suffered three fractures to the right arm, multiple fractures to the right ribs, bruised lungs, and a bruised right kidney.",1
"An employee was attempting to climb from one scaffold ladder to another. As he reached to tie his lanyard off to the ladder, he fell to the ground and fractured his right leg, requiring hospitalization.",1
An employee was in the parking garage walking towards the building when he was hit by a car entering the garage. The employee was hospitalized for a fractured leg.,1
"An employee was breaking down a pallet of freight in the warehouse when a 7.5-pound box fell approximately 2 feet onto the employee's face, rupturing a blood vessel.",1
"While inspecting a residential roof for damage, an employee fell from a ladder and suffered an arm fracture.",1
An employee was de-burring a piece of sheet metal with a belt sander when either the belt sander pulled the sheet metal or the sheet metal slipped and amputated the top of the employee's right thumb from the knuckle to the nail.,1
"While placing springs into a grinding machine, an employee contacted the guide edge of the grinding machine, amputating the right index fingertip. The machine was unguarded at the time of the incident.",1
"An employee was using a planter machine to plant broccoli. As he was pulling a plant from the planter machine's cup, the cup turned and amputated his right index fingertip. The machine was unguarded at the time of the incident.",0
"An employee was running a test procedure on an explosive device when it detonated, sending shrapnel into the employee's right hand and arm.",1
"An employee was using a handheld, air-powered wire bender tool (used to straighten wire coil so it can be welded to the end of another wire coil). He was holding the wire bender handle with his right hand while his left hand was holding the end of the wire bender. The tool was actuated, and his left middle finger was caught between the wire and the tool, partially amputating his left middle finger.",0
"On 11/29/2016 at 12:30 p.m., an employee was attempting to reset the tooling in a turret punch press when the tooling came off and pinched the employee's right middle fingertip, amputating it.",0
The employee was unloading a car from a car hauler. He was standing between the car and a fence strapping down the car. He lost his balance and his arm was caught on a piece of metal protruding form the fence resulting in a four-inch laceration on his right forearm.,1
An employee was working on a die cut machine that manufactures metal caps when the machine amputated his right pointer finger.,0
An employee slipped and fell on a wet floor suffering a strained groin muscle and  lumbar disc herniation.,1
"An employee kneeled down in a narrow, guarded area to clean around a tank that contained zinc. His right leg slipped and became partially submerged in the tank, causing second degree burns to the employee's right leg (from the upper thigh to the ankle), right arm, and right abdomen.",1
"On November 29, 2016, an employee was entering a cooler when she tripped over a coworker's foot. She fell, striking her right elbow and knee on the floor. She was hospitalized with a fractured kneecap.",1
"An employee was moving sows from gestation to the farrowing room. He was trying to move an animal out of a stall when he lost his balance and fell, hitting the metal side of a pen on his way down. He was hospitalized with a dislocated left shoulder and a concussion.",1
"An employee was walking from the parking lot to the building when her foot clipped a concrete parking barrier, causing her to fall and break an arm and leg.",1
"An employee was injured when a wall collapsed on him during work operations, requiring hospitalization.",1
An employee was converting a cupper machine by removing the die set when the die set slid back and amputated his left ring and pinky fingers.,1
"An employee was walking across some wet railroad tracks to deliver auto parts when he slipped on the tracks and fractured his left hip, requiring surgery.",1
"An employee slipped and fell to the ground while getting out of the cab of his truck, breaking his hip.",1
"A maintenance employee was working on a rotoformer machine when a moving cylinder caught his glove. He pulled his arm back and struck a hot piece of the machine, suffering a severe forearm burn that required hospitalization.",1
A crew was using a hand-chain hoist to move a large filter basket back into its housing when the basket moved unexpectedly and smashed the injured employee's right index finger against the housing. The employee was hospitalized with a laceration.,1
An employee was using a band saw to manufacture pallets for an engine when the saw amputated his middle and index fingers and fractured his ring finger.,1
"An employee was working on the engine of a compressor when a flash fire occurred, burning the employee's hands and face. He was hospitalized.",1
An employee was fighting wild fires and was bitten by an insect. The employee suffered a reaction requiring hospitalization and surgery.,1
"An employee was cleaning the marker machine puck and press assembly when his hand was caught between the press and the puck, amputating his left index finger to the first knuckle.",0
An injured employee was removing a wedge from the Newman Shaving Box. The machine operator hit a button and a log advanced striking the injured employee and causing a fracture.,1
An employee tripped over a computer wire and fell to the ground. The employee suffered a possible broken hip and was hospitalized for surgery.,1
"On 11/30/16, an employee was pulling pipe from a well when the pipe was released from the elevator before the arm that held it was in place. The pipe fell and struck the employee's right hand, crushing his ring finger above the knuckle and fracturing his middle finger.  His ring finger had to be amputated.",1
An employee was driving a forklift and collided with a stationary forklift breaking a metatarsal on the left foot.,1
An employee was troubleshooting a sheave (the mechanism that lowers and raises an elevator) when the sheave rotated. His right middle finger was then caught and amputated between the sheave and the elevator cable.,1
"An employee was at a customer's house, walking up to the front door when the wooden stairs broke. The employee's foot went through the broken stairs to the ground and he felt a pinch in his lower back. The employee tried to get up and walk, but he could not and fell to the ground. The employee was hospitalized overnight for a lower back injury.",1
"An employee was plastering a wall approximately 14 feet above the ground while working from a hydro lift when he fell to the ground, breaking his left wrist, fracturing his hip, and rupturing his spleen. He was hospitalized. The lift was not guarded at the time of the incident.",1
An employee was opening a tablet of Metamucil to give to a resident and suffered a severe allergic reaction resulting in anaphylaxis and hospitalization.,1
"A forklift operator was driving in reverse and making a right-hand turn when he collided with a 4,000-pound steel parts basket. The basket was pushed into a nearby employee who was operating a press, pinching him between the basket and the power press. He suffered a right buttock laceration and right leg contusion.",1
"An employee was walking down a hallway when she lost her footing and fell, injuring her hip and pelvis.",1
An employee's hand was crushed while operating a dough machine.,1
"An employee was using a pole to straighten a pallet of papers traveling on a track when he fell between the floor and the track. He fell approximately 20 feet to the floor below, breaking his pelvis.",1
"After turning on an air compressor, an employee was descending a ladder when it slipped out and the employee fell approximately 5 feet, suffering a broken right ankle.",1
An employee was struck in the face by a metal cap while leak testing a water line. The employee's cheekbone was fractured.,1
"An employee was repairing the stacker portion of a door machine that had been elevated and supported with a forklift. When he removed the forklift and then removed a bolt, the stacker fell on him, crushing his pelvis and breaking ribs.",1
An employee was feeding dough onto a conveyor when their smock got caught in the conveyor belt. The employee suffered a hand injury and was admitted to the hospital.,1
An employee was unloading snacks from the rear of a truck when the truck door came down and severed the employee's left middle fingertip.,0
"An employee stood on a plastic table to hang Christmas decorations, lost her balance, fell to the floor, and broke her left arm. She was hospitalized and required surgery.",1
An employee was descending the ladder of a flat bed truck and fell to the ground breaking a hip.,1
"An employee was collecting saliva from a hippo when the hippo's mouth closed and caught the employee's left pinky fingertip, amputating it.",0
An employee was installing insulation and  stepped on a board with a nail in it. The nail punctured his boot and foot. The employee was hospitalized.,1
An employee slipped on the wet floor in the kitchen and injured the right elbow.,1
An employee was climbing an extension ladder that was leaning against a generator. The top of the ladder shifted and the employee fell approximately six feet off the ladder onto a concrete curb breaking the lower right leg.,1
"An employee was unjamming the core baler machine when the right hand was pulled into the core cutting nip. The employee suffered open fractures to the second, third and fourth digits on the right hand. Two days later the employee's middle fingertip was surgically amputated.",0
"An employee was placing a stack of plates on the counter when her foot became tangled in an electrical cord, causing her to fall on her right hip. She suffered a right leg/hip contusion.",1
The employee was walking around the building inspecting for termite damage when he felt light headed and dizzy and passed out. He was taken to the hospital where he was diagnosed with a heart attack.,1
An employee was changing the die on a press. The wrench slipped off a bolt and the employee fell breaking a hip.,1
An employee was cleaning the slicer and amputated the tip of the third finger on the right hand.,0
"An employee was conducting an inspection onboard a moored vessel. While exiting a space, the employee stepped onto an unmarked, unsecured deck plate covering a void. This caused the plate to shift and the employee fell into the space below.",1
An employee was hospitalized on 12/1/16 after she tripped over a student's backpack and fell into a bookcase. She received a laceration to her chin and a concussion.,1
"An employee was guiding a palm tree that a front-end loader was loading onto a work vehicle when the strap holding the tree slipped, causing the tree to shift and strike the employee. The employee suffered a head contusion.",1
"An employee was working on a metal plate when the machine was activated and caught the employee's right hand, requiring hospitalization.",1
An employee threw an engine rigging chain and it struck his head resulting in a contusion and laceration to the left side of his head.,1
"While working inside an articulating boom lift, an employee came in contact with a live, 34,500-volt knife switch. The employee suffered an electrical shock and burns, requiring hospitalization.",1
"On December 1, 2016, at about 2:00 PM, an employee slipped and fell on a damp floor while walking inside the store, fracturing her knee and requiring hospitalization and surgery.",1
"An employee was prepping a storm drain in the middle of the road when a city inspector drove up past the site barricade and struck a ladder, which then struck the employee. The employee lost three front teeth and suffered a fractured nose. The employee was wearing a safety vest and hard hat at the time.",1
An employee suffered a back injury while helping to move a patient from a chair to a bed.,1
"An employee was checking for coolant leaks on a generator when his left hand contacted the fan blades, amputating a few fingers. He was hospitalized and had surgery. The generator was not locked out at the time of the incident.",1
An employee was running the table saw and lacerated fingers on his left hand.,1
"An employee was punching cases on an assembly line when he noticed a pair of pliers near the chain and sprocket. As he attempted to retrieve the pliers, the chain snagged his glove, pulling his middle finger between the chain and sprocket and amputating his fingertip. The machine was active and unguarded at the time of the incident.",0
"An employee was preparing to euthanize a heifer using a captive bolt gun. He armed the captive bolt gun and repositioned himself for better footing. When he fired the stunner, the gun shot into his right hand and wrist, causing tendon and nerve damage that required hospitalization.",1
An employee suffered chemical burns to the throat and pneumonia to the left lung when they entered a restroom that had recently been cleaned with a Clorox mixture.,1
"While moving a 125-pound wooden door to a table, an employee's finger was caught between the table edge and the door frame. The employee's right middle fingertip was amputated and fractured.",0
An employee was confronting a shoplifter when the shoplifter pushed the employee into a concrete pillar. The employee fell to the floor and suffered an internal injury that required hospitalization.,1
"While walking in a corridor of the hospital, an employee slipped and fell, fracturing her femur. She was hospitalized and had surgery.",1
"An employee was walking from the printer to a desk when her right foot became caught on the corner leg of a desk. She lost her balance and fell to the floor, injuring her left hip.",1
"While installing a manure pond garage door, an employee fell off a ladder and broke four ribs, requiring hospitalization.",1
"While replacing a conveyor roller, an employee's right middle fingertip became caught on the chain/sprocket and was partially amputated. The conveyor was not locked/tagged out at the time of the incident.",1
"An employee was existing the tractor trailer, missed a step and fell breaking a hip.",1
"Employees were unloading a pallet from a rack. When they released the pallet, the injured employee's left middle finger was not clear and became caught and amputated between the pallet and the ground.",0
"An employee was working on a plastic film extrusion line when her clothing became caught in the machinery. Her left arm was then pulled in between two rollers in the extrusion line, causing skin and tissue trauma. She was hospitalized overnight.",1
"On December 1, 2016, an employee was using a ladder to turn off a valve when the ladder slipped out. The employee fell and suffered a broken left arm, requiring surgery.",1
"On 12/1/16, at approximately 8 p.m., an employee's finger was caught in a closing door, amputating the fingertip.",1
"An employee was exiting a ladder to a rooftop when he slipped and fell 10 feet to the ground, breaking his ankle.",1
"An employee was using compressed air to blow dust off the photo eye at the stacker machine when his glove was caught in the chain tensioner, severing his left ring fingertip. The machine was unguarded and operating at the time of the incident.",0
"On 12/1/16, an employee was standing next to a 40-liter glass carboy that was being tested for integrity when the carboy shattered. Flying glass hit the employee, who suffered minor cuts on the leg and serious lacerations to the hand, requiring surgery.",1
An employee was greasing the back of a milling machine when the operator reversed the machine and crushed the employee's ankle that may result in a medical amputation.,0
"An employee was working on the roof of a building when he noticed a crack in a concrete deck panel. As he attempted to remove the deck panel to patch it with wood, the panels he was standing on also broke. He fell almost 20 feet to the concrete floor below, cracking his L2 and L3 lumbar vertebrae. He was hospitalized and had surgery.",1
"An employee was removing a temporary barrier wall. A loader with forks was used to lift the wall to relieve pressure so the employee could pull pins from it. The pin shifted as he was pulling it and his right index finger was caught between the bolt and the barrier wall, amputating it at the first knuckle.",0
"On December 1, 2016, at approximately 11:00 AM, an employee slipped on the grass slope outside of the building and fell, dislocating and fracturing her left ankle. She was hospitalized.",1
An employee was operating a molding machine and amputated the left index finger.,0
"An employee was working with a helper to change the belt and sheave on an air intake fan. He was manually moving the fan belt while a coworker was pushing it when his gloved left-hand ring finger became caught between the sheave and belt. When he pulled his hand out, the skin came off the first digit of his left ring finger. The first digit had to be surgically amputated.",1
An employee was abrasive blasting inside a small mockup tank. The employee lost control of the blast hose and suffered lacerations to the left thigh and left leg from blast grit.,1
An employee was working on a sprinkler pipe while standing on a 6-foot ladder when he fell off the ladder and broke his ankle.,1
"An employee attempted to unload an irregular package from a trailer. The other packages in the trailer shifted and caused the employee to fall. The irregular package then fell onto the employee, who suffered a fractured left leg.",1
"An employee was checking the sensor of a valve. As he was closing the lid, he lost control of it. When he attempted to grab the lid so it did not slam, it crushed and partially amputated his right third fingernail.",0
"An employee was drilling bolt holes to fit the scrape blade on a snow plow. As the employee attempted to clear a metal shaving out from behind the bit, the employee's sleeve was caught and was pulled into the drill chuck, suffering a broken forearm. The drill chuck was guarded at the time.",1
"An employee was installing a gas fryer. After restoring propane flow to the fryer, he attempted to light the pilot light. An explosion then occurred, causing second degree burns to his hands, arms, and face.",1
An employee was hospitalized after tripping over a toy and landing on her right wrist.,1
"On 12/2/16, a temporary employee fell from a ladder to the concrete floor, suffering a laceration to the back of the head and a compression fracture to the spine. The employee was hospitalized.",1
An employee was using a 12-inch miter saw to chop scrap wood from 4-foot to 2-foot pieces when the saw amputated his left index finger between the first and second digit.,1
"On December 2, 2016, at 2315, an employee was blanching green beans when they became lodged in a stand-alone chute that is used to transfer product from one location to another. The employee was using a scraper to dislodge the beans when there was an uncontrolled release of water that was approximately 200 degrees Fahrenheit. The employee was hit by the water and suffered second degree burns to the upper back, arms, forehead, and ear.",1
An employee was fixing a fan belt on the roof when his thumb was caught and amputated in the fan belt/wheel.,0
"An employee slipped and fell on steps while walking into the building from the parking lot, suffering a possible broken hip.",1
"An employee was cleaning a machine when his sweatshirt was caught and wrapped around the roller bar, causing him to lose circulation in his right arm and wrist.",1
"An employee was working at a construction site and his foot was run over by a forklift that was transporting metal sheets. The employee suffered a broken ankle, foot and toes.",1
"An employee was applying trowel finish to double tees. As the employee started the trowel, he discovered it was set to full throttle. He struggled to get the trowel machine under control. The trowel blade contacted a portion of the double tee side rail. The blade stopped, but the trowel continued to rotate, throwing the employee off of the form and onto the ground on his right side. The employee was then struck by the trowel machine control bar.",1
"On December 2, 2016, at approximately 7:30 a.m., an employee was walking down a stairwell to the basement when he missed the first step and fell down approximately 12 stairs. He was hospitalized with a head laceration and a fractured left wrist. At the time of the incident, the backup generator was being tested and a delay in the emergency lighting caused the stairwell to be poorly lit.",1
An employee was removing and replacing the hydraulic cylinder from the powered industrial truck. The truck's forklift mechanism became unsecure and struck the employee on the left hand amputating the pinky finger.,1
"An employee had just picked up a sauté pan that contained scalding cooking oil and meat juices when hot grease splashed the back of his hand and wrist, causing severe burns.",1
"An employee was cleaning an automatic roll-up door while working from a ladder. The employee's rag and gloves became caught between the roll-up door, which subsequently broke the employee's left arm.",1
An employee suffered a ruptured neck disc while using a 3-pound metal scraper to clean the coating roller on a printing unit.,1
"An employee was removing service wires from an electrical panel when his pliers slipped and struck the electrical cabinet. An arc flash occurred, causing second degree burns to his right hand and minor burns to his face.",1
"An employee was releasing the hook and chain rigging on an engine when the swinging chain and hook struck the employee's forehead, causing a concussion that required overnight hospitalization.",1
An employee was hanging sheet metal from a ladder when he fell from the ladder and broke some ribs.,1
"On December 2, 2016, an employee was using a hoist to move a 945-pound casting into a paint booth when the casting fell from the hoist and onto the employee's left foot, amputating all toes.",0
An employee was working from a step ladder when one of the ladder legs failed and the employee fell approximately 8 feet to the ground. The employee suffered a bump on his head and was hospitalized.,1
"An employee was disconnecting a bolt from an I-bolt attached to the top frame rail of the side wall of a trailer. The bolt goes through the threaded portion of the I-bolt to hold it in place, and a crane hook goes through the I-bolt.  The crane hook was still attached to the I-bolt.  As the employee was removing the tension bolt, the crane trolley was moved, and the employee's finger was pinched/amputated between the bolt head and the trailer frame rail.",0
An employee was shafting a corrugated roll of paper when the roll crushed his right hand up against the frame of a splicer bar. His right thumb and index fingers required surgery.,1
"An employee was opening a crate of safety glass when the glass fell on top of him, fracturing both legs and requiring hospitalization.",1
"On December 2, 2016, at 11:30 AM, an employee was walking in the back of the parking lot when he was robbed at gunpoint and shot in the head. He was hospitalized.",1
"An employee was stringing up an accumulator machine when his right middle finger was caught between the wire, amputating his fingertip.",1
"An employee was skiing down a road slope and instructing students when he hit an edge. He then fell to the ground on his side, breaking ribs and suffering a collapsed lung.",1
"An employee's right index fingertip was caught in the pinch point of moving equipment, amputating the fingertip.",0
"An employee was picking up the wheel end of a hand dolly. When he sat it down, his left pinky finger was pinched between the wheel and the housing, causing a distal amputation.",0
"An employee went out to the parking lot to retrieve a shopping cart when she was startled by running children and fell to the ground, fracturing her left femur and left hip. She had surgery.",1
"While elevated in a personnel lift and performing maintenance on a refrigeration system, an employee was exposed to refrigerant ammonia, suffering inhalation injuries that required hospitalization.",1
"An employee was working on the rig floor when a traveling block fell and struck him, fracturing his clavicle and ribs.",1
An employee was working in an aisle and picking product when cases of salad fell on the employee. The employee was hospitalized with ankle and wrist pain.,1
An employee was attempting to place roof sheathing material on a new residential structure when the wind picked the employee up and sent him off the edge of the structure to the ground below. He suffered a cracked rib.,1
"While sorting donations in a trailer, an employee tripped and fell on the trailer/truck netting system, suffering a fractured femur that required hospitalization.",1
"An employee was ground spotting while coworkers moved a transformer on a pull and push truck near a railroad crossing when he tripped and fell over a road marker and was pulled under the trailer tires, fracturing his right leg.",1
"An employee was walking from the dock area into a trailer across the dock plate/bumper when he misstepped and lost his footing. His right foot and leg went off the dock plate/bumper, leading his left leg to bend abnormally and his left femur to break above the knee.",1
An employee was cleaning water in the nail salon from a busted pump/pipe when he was bitten by a spider on his left hand. He experienced swelling and pain in his left hand and required hospitalization.,1
"An employee was using a 4'x8' 3/4"" MDO plywood to construct an 8' trash bin. The employee was using the plywood as a saw horse to put another side on the bin. He went to cut the wood using an electric circular saw and the vibration caused the wood to fall which caused the saw to kick back and amputate his left index finger below the second knuckle and cut his left thumb.",0
"On 12/3/16, an employee fell off a residential roof and suffered head trauma, requiring hospitalization.",1
"An employee misstepped while climbing an extension ladder and fell approximately 10 feet, suffering facial fractures to the eye socket area.",1
"A team of four employees were replacing a chemical pump. When the pump was replaced, the team began to dismantle the setup. Team member 1 was taking down a come-along when he slipped and grabbed onto a nearby strap to regain his balance. This caused a bar to fall directly onto the hand of the injured employee who was replacing a pump eyelet below the bar and come-along assembly. The injured employee received a right thumb laceration, fracture and tendon separation. As a result, the right thumb was partially amputated.",1
"An employee was cleaning the hopper on a combine with an air hose when the employee's right leg was caught in the combine auger, amputating it mid-calf.",0
An employee fell down the stairs and suffered a shoulder sprain.,1
"An employee was standing on a conveyor (approximately 2 feet to 3 feet above the ground) to cut and dismantle it when the conveyor collapsed. The employee fell and hit the ground/steel conveyor frame, suffering a fractured hip and wrist.",1
"On December 3, 2016, an employee was removing metal brackets from a semi truck trailer when a bracket struck the employee in the eye, requiring hospitalization.",1
"An employee picked up a case of jelly from one pallet and walked over to another pallet to place the case of product. Once the employee got to the second pallet, he tripped and fell in a lunge position, striking his right knee on the ground and fracturing his right femur.",1
"On December 4, 2016, an employee fell from a portable 4-foot, fiberglass A-frame ladder that had been set up on the finished floor and was covered with paper. The floor vents had not been installed and one of the ladder legs was on the paper that covered a vent floor opening. The injured employee had climbed the ladder to approximately the second or third step when the ladder tipped as the leg dropped into the floor hole. He fell and his lower body struck the floor while his upper torso struck against the wall corner. He suffered two fractured right ribs and a punctured right lung, requiring hospitalization.",1
The employee slipped on the snow on the sidewalk while leaving work. The employee was hospitalized with a back injury.,1
"An employee was unclogging the Stick Machine while it was running. His left hand contacted the saw blades resulting in amputation of the middle, index and ring fingers.",1
"An employee was setting a pipe at a well site and was guiding the pipe with his hands. As he was lowering the pipe into a hole, his right index fingertip was caught and amputated by the pipe.",1
An employee was installing a cross arm in a pole with 7620 KV when he received flash burns on the left side of his body (arm to waist). He was hospitalized.,1
"An employee on a ladder was reaching to remove some clothes from the back of a rack while holding on to a horizontal pipe (used to hang clothes) near the front of the rack. The horizontal pipe disengaged from the rack uprights and fell, causing the employee to lose her balance and fall to the ground. She fractured her left ankle.",1
"As an employee was walking away from the rig floor, he tripped and fell, hitting his shoulder on the drill line that was on the rig floor. His right shoulder blade suffered a hairline fracture.",1
"On December 5, 2016, an employee fell 7 feet 10 inches from a ladder resulting in multiple fractured ribs, a torn rotator cuff and a fractured rotator cuff socket.",1
"On December 5, 2016, an employee fell to a lower level while exiting the roof, suffering cuts, scrapes, and possible fractures to the wrist and ankle.",1
"An employee was cutting a dock plate when it came loose and landed on the employee's left foot, injuring several toes. Two toes had to later be surgically amputated.",0
"On December 5, 2016, an employee fell down a flight of stairs at a patient's home, striking her head and losing consciousness. She suffered a head injury, detached retina, and fractured right arm, requiring hospitalization.",1
"An employee was working on the chain and sprocket to a tape machine. As he used a tool to tighten the chain, his hand slipped and his right index finger contacted the moving chain. His right index finger was partially amputated (approximately 2-2.5 cm). The machine was running and was not locked/tagged out at the time of the incident.",0
"An employee was putting away furniture using a cherry picker and was 30 feet high when he fell to the concrete floor, breaking his left leg and arm. A fall protection line was not connected at the time of the incident.",1
"An employee was investigating the discharge of a rotary airlock.  He removed the inspection door, visually inspected the spout, and thought he saw a suspicious buildup.  When he attempted to remove the buildup inside the spout with his left hand, his glove was caught by the running airlock, which then pulled his hand in and amputated three fingertips.",0
An employee was wrapping a roll on a packaging crater when his right middle finger and ring finger were caught between a chain guard and a wind-up roller switch. His middle fingertip was amputated.,0
"An employee was installing rubber protection (hoses and blankets) on a 13.2-KV powerline when an arc flash occurred, causing second and third degree burns to his upper right back and left upper leg.",1
"An employee was using a scaffold to clean a marquee sign. The locking collar on the scaffold did not hold and the scaffold tilted, causing the employee to fall and suffer a compound fracture to his right lower leg.",1
An employee's fingertip was caught and amputated in a conveyor belt.,0
An employee pulled the cord on a small water pump motor and their hand was pulled into the flywheel amputating a fingertip (without bone loss).,0
"An employee was removing a link arm part from a crane sling to set it down on top of other stacked link arms. One side of the link arm was down on top of the stack and the other side was elevated.  When the employee removed a piece of wood to lower the elevated side of the link arm, it came down and amputated the employee's left middle fingertip.",0
"An employee was pushing boards into a chipper when the ends of two boards closed together and caught the employee's right middle fingertip, amputating approximately one-third of the fingernail.",0
"An employee slipped and fell on the floor, suffering a broken femur.",1
"An employee was assembling a tool when he noticed water coming out of the tool's drain hole. He tipped the tool upwards to drain the water. When he was setting the tool down, it pinched and amputated his right middle fingertip between the seal support frame and the tray lifter.",0
An employee was scraping a hickey off a printing press roller when his hand was pulled into the cylinder-roller gap. He sustained a compression injury and was hospitalized overnight.,1
"An employee was attempting to push product packaging into the cellophane film wrapper when the crimper shaft that cuts, heats, and seals the cellophane film amputated her left middle fingertip. The machine was guarded at the time.",0
"An employee and his supervisor were having a conversation while standing between two pieces of equipment when a coworker operating an upright pallet jack struck the employee's left leg, breaking it. He was hospitalized.",1
An employee was walking into the facility through the employee entrance when her left middle finger became caught in the door. Her fingertip was amputated at the first knuckle.,1
An employee was training a horse when the horse had a heart attack and fell on the employee. The employee suffered a bruised leg.,1
An employee slipped on some ice and fell to the ground fracturing a hip.,1
An employee was picking up and loading material onto a truck with a forklift when his left foot was caught between the forklift and a post that protects the door opening. His foot broke and required surgery.,1
A temporary employee was turning a corner while operating an electric pallet jack when the employee's ankle was caught and fractured between the wall or a racking system.,1
An employee was helping to move a transformer when his left index finger was pinched and fractured between the transformer and metal strapping on the wall.,1
"An employee was building a set using a guarded Skil Saw. When he was cutting the wood, the wood jolted causing his hand to move and resulting in amputation of the left pinkie fingertip.",0
"An employee fell from a ladder or the top of a truck to the ground, suffering broken ribs, a punctured lung, and head lacerations.",1
"On December 5, around 9:00 a.m. to 9:30 a.m., an employee was using an aerial boom lift in a road center median. As he was coming down with the basket, the basket became positioned in live traffic and was hit by a box truck. He was hospitalized with fractured ribs and a punctured lung.",1
An employee was attempting to remove a paper jam in a machine when the machine blade amputated his left index fingertip.,0
"An employee was using a circular saw to cut a corrugated plastic pipe when the saw kicked back, cutting the employee's face and right armpit.",1
"An employee was operating a tugger to pull racks to the warehouse while a coworker on a forklift was stacking finished product in the warehouse. The coworker sounded his horn upon backing up and attempted to take a right turn around a stack of knockdowns. The employee was heading into the warehouse area at the same time and came around the stack of knockdowns. The coworker's forks hit the front left side of the employee's tugger. The left fork hit the front left side, spinning the back of the tugger towards the lift and allowing the right fork to strike the top of the employee's foot. The employee suffered a fractured left foot.",1
"An employee pulled onto a metal-surface truck scale and stepped out of his truck while carrying a pint-size sample bottle of the materials he had just picked up. It was raining and he slipped. The sample bottle fell to the ground and broke. He then fell onto the bottle, which severed the ulnar nerve in his right wrist.",1
"An employee was standing on a ladder and disconnecting a hose from a silo when he fell off the ladder and hit the ground, suffering a radial fracture.",1
An employee was hit in the head by a piece of steel.,1
"An employee's retractable lifeline became caught and the employee fell approximately 28 feet from a metal roof to the concrete below, suffering arm, shoulder, rib, and hip injuries.",1
An employee was assisting an outside driver with an extendable chassis when his right arm was caught or struck by the chassis as the truck driver pulled forward. He was hospitalized with a right forearm injury.,1
"While using a dolly to deliver a package to a home owner, an employee fell out of the back of the delivery truck and onto the roadway, breaking three ribs and an elbow.",1
"On 12/5/2016, an employee suffered an amputation of the right index fingertip while cleaning the caramel depositor machine when his finger got caught in the air actuated slide that opens and closes.",0
"An employee received an electrical shock while unplugging a power strip, suffering sweating, tingling, and nausea.",1
"An employee was attempting to empty a sweeper into an open-top dumpster sitting on the dock apron below him. Suddenly, the dumpster began to move and the employee and the sweeper fell off the dock. He injured his lower back and was hospitalized.",1
"On December 6, 2016, around 1:25 p.m., an employee was cleaning the gutters of the second level of a residence from a ladder placed on the roof of the first level. When he was on his way down the ladder, he slipped and fell on the roof, and then rolled off to the ground. He broke his neck and was hospitalized for surgery.",1
"An employee and a coworker were attempting to lift a 500-pound grinder bag full of polyvinyl chloride powder when the bag slipped and struck the employee, knocking him to the floor. He suffered head and lower back injuries.",1
"On December 6, 2016, at approximately 2:10 a.m., an employee was pressure washing the floors in the shop when the heated, high-pressure water from the wand made contact and penetrated his leather work boot. He was hospitalized for a laceration and second degree burn to the left middle toe.",1
An employee suffered a head injury and was hospitalized.,1
"An employee was operating an electric pallet jack. While making a left turn, he struck a steel beam. His left ankle/foot were caught and fractured between the steel beam and the pallet jack.",1
"An employee was carrying a metal pole to install filler between tables. He was walking by a table truss when he bumped the truss, which was being supported by a cross brace. The truss then fell over and landed on the employee's lower back and leg, pinning him down. He suffered a dislocated left hip and broken left femur.",1
"While walking to a customer's location, an employee slipped on ice under a snow-covered walk and fell, breaking the right ankle. The employee was hospitalized and had surgery.",1
"An employee was watching a contract employee change out a tire on a vehicle. The tire separated and a portion of the wheel and tire assembly struck the employee that was watching. He suffered a fractured femur and injuries to his mid section, leg, and the middle of his body. He was hospitalized.",1
"An employee was carrying a tray when she slipped on sauce and fell on her right knee, breaking her kneecap on the tile floor.",1
"An employee was unscrewing lock pins from a wellhead to remove a tubing hanger when an L-80 joint of tubing and hanger was ejected from the frac valve due to the pressure-to-weight differential. The tubing and hanger struck the employee's back, fracturing the L1 vertebra.",1
An employee suffered a right finger amputation while attempting to remove food products from the jammed motor blades of a vacuum tortilla oven.,1
An employee was unloading packages from a trailer with a coworker when the coworker accidentally dislodged a package that made contact with the employee's head. He suffered a head contusion and required hospitalization.,1
"An employee was emptying the skid bin underneath a rotary lock at the bag house, which allows bags to empty polymer wax, when the unit became plugged. As the employee attempted to clear the plugged chute, his right index, middle, and ring fingers were caught and amputated by the rotary valve (rotating drum with fingers).",1
An employee was connecting a trailer to the ball of a truck. His finger was in the coupling when the trailer came down and amputated his fingertip.,0
"An employee was rigging up forms and installing a lifting hook when the crane operator inadvertently lifted the form. The employee's finger was then caught between the form and the lifting hook, amputating the first left-hand digit.",1
"A temporary employee on a catwalk was cleaning the incandescent lighting covers above fertilizer blenders when he fell 7 to 8 feet off the catwalk and onto the concrete floor, injuring his back. He was hospitalized.",1
"An employee was checking the oil on a utility vehicle when the safety latch on the hoist supporting the bed slipped, causing the hoist to fall on the employee. The employee suffered a leg fracture and was hospitalized.",1
Two employees were replacing the decking on a roof. They were lifting up the concrete panel using a pry bar when the deck to the right of them gave way and they fell through the roof. One of the employees fell to the concrete floor below and was hospitalized with six broken ribs and a broken pelvis. The employee was not tied off at the time of the incident.,1
"An employee was manually pushing a load of lumber when the truck moved and pushed him to the floor, injuring his left ankle.",1
"While servicing an HVAC unit on the roof of a commercial building, an employee's finger was caught and amputated or avulsed in the fan belt of the HVAC unit.",0
An employee was cutting a beef rib on a band saw when the blade amputated his right thumb tip and fractured his right index finger.,1
An employee was trying to lift a granite countertop out of a pick-up truck bed when he twisted and injured his lower back.,1
"An employee was using a bulldozer when it became stuck. He attached the lifting slings to the brackets and was lifting the bulldozer and placing it on top of cargo. After hooking up the shackles/sling to the bulldozer, he held onto the cable with his left hand and flagged the crane operator to lift with his right hand. When the slack was taken up, the employee's left pinky was pinched between the cable and the cab of the bulldozer, partially amputating his pinky fingertip.",0
"An employee was feeding parts into a machine at her workstation when she experienced shortness of breath and collapsed, requiring hospitalization.",1
"An employee was attempting to unclog a transfer auger and had removed three to four bolts from the housing. The employee was scraping the product with the left hand when the left middle finger was caught in a pinch point between the auger and casing, amputating half of the finger. The auger was turning at the time of the incident.",0
"An employee was on top of a mobile tank trailer, removing the loading arm apparatus that was used to load the trailer with molten sulfur. The bucket he used to dispense the sulfur then began to fall into the open hatch of the trailer. When he tried to catch it, his hand became submerged in the top surface of the molten sulfur, suffering second degree burns.",1
An employee was attempting to cut wood flooring to size with a chop saw. He mashed down on the steel plate on top of the saw blade guard with his left hand while his right hand was near the blade. The blade then severely lacerated his right hand and amputated his right pinky fingertip. The saw was guarded at the time of the incident.,1
"An employee was pushing meat totes on a dolly from the meat cooler to the meat room. As he was going through the doorway, the totes fell off. He tripped over them and landed on his head, suffering a concussion.",1
"An employee was doing maintenance on an automated label laminator. After replacing a roll, the employee had to place stripping bands back into the grooves/ridges of the glue applicator roll. He began to guide the stripping band into place on the groove with his left hand to keep the bands from sliding out. At the same time, he was straightening the stripping band with his right hand to keep it from twisting. His left hand then got close to a nip point. As he was attempting to pull his hand out, the rolls smashed his left hand, amputating his middle fingertip (no bone loss) and avulsing the fingernails of his third, fourth, and fifth digits.",1
"An employee was walking in the parking lot when she slipped on a small patch of ice and fell, breaking her elbow. She required surgery and hospitalization.",1
An employee was training a new coworker on cutting PVC pipe when the saw blade amputated the employee's left index finger just below the first knuckle. The saw was guarded at the time.,0
"On December 7, 2016, an employee was cutting metal tubing on a band saw. The employee was attempting to retrieve a part in the saw housing when the blade amputated the employee's right index fingertip.",0
"An employee was attempting to switch power from one circuit to another when an arc flash occurred, burning his face and arms.",1
An employee was cleaning a bolt on a piece of equipment when a coworker who was tightening a bolt on the same piece of equipment dropped a bracket. The bracket struck and amputated the employee's left pinky fingertip.,0
"An employee was cutting half-inch wooden boards on a table saw. When he reached out to move the fallen wood out of the way, the end of his thumb contacted the blade and was partially amputated.",0
"An employee was moving a refrigerator when it fell onto the employee's forearm, breaking it. The employee was hospitalized.",1
An employee was readjusting an edge guard and a strap smashed their left thumb tip.,0
An employee fell off a loading dock and injured his knee.,1
"An employee and a coworker were adjusting the stops on the second plate of an 825-ton press. They needed to bring the second plate up for adjustment. The coworker was operating the controls to adjust the height of the second plate and proceeded to turn off the exhaust. The second plate raised while the employee working inside the press had his arm resting on the trip rod. When the second plate raised, it pinned the employee's right forearm between the trip rod and main ejection nut, causing a compound fracture.",1
"An employee had collected recycling cans from the left side of the street and was crossing back to the front of his truck when a car struck him. He suffered a bilateral broken wrist, laceration near the eye, and a bruised groin area, requiring hospitalization and wrist surgery.",1
"An employee was walking in the parking lot when she stepped onto black ice and fell. Her left leg twisted during the fall, breaking her tibia and fibula.",1
"An employee walked up the plywood decking on a new construction residential home to install an anchor point. The employee then slipped on roof sheathing and fell to the ground, suffering a fractured right leg and requiring hospitalization.",1
An employee was using a table saw when it amputated his left-hand fingers.,0
An employee was installing dunnage on a trailer float when his left thumb tip was crushed just below the nail.,1
"On December 7, 2016, an employee fell to the floor while handling mail and suffered a fractured hip, requiring hospitalization and surgery.",1
"An employee was performing pipe-fitting operations at the top of a 6-foot rolling staircase (rollers locked in place). When she reached out and grabbed a fitted pipe, it came loose and caused her to lose her balance and fall down the stairs. She broke her right wrist, left hand, and sacrum.",1
An employee was operating a press machine when his left index and middle fingers were amputated.,1
"An employee was unhooking a trailer from a tractor when his left hand was caught between the trailer and tractor, amputating his left index fingertip at the first knuckle.",0
"An employee was working on a 6-foot ladder, repairing stucco at a commercial building, when he fell and broke his arm and ribs. He was hospitalized.",1
"An employee was cutting wood using a chop saw when the guard became stuck in the up position. As the saw was powering down, the employee's jacket was caught on the blade, which then pulled the employee's left forearm into the machine, lacerating it.",1
An employee and a client leaned against the iron railing on a balcony at a local restaurant and the railing gave way causing the employee and the client to fall one story to the ground below.,1
An employee broke her ankle after tripping over an airline.,1
An employee fell into a ditch along the side of the road while walking outside a company vehicle. The employee suffered a right shoulder fracture and required hospitalization.,1
An employee was driving a stand-up vehicle when he grazed the side of a stored rod. Stored material then fell on and injured his hand.,1
"An employee in a drilling rig had drilled a shaft for a new sewer tunnel. The employee was changing the bit on the drilling rig when the seat broke on the operator's station, causing the employee to fall off and into the drilled hole (14 feet). The employee suffered a head laceration and concussion.",1
"An employee was attempting to move a jammed machinery part. He moved the controls, but the part did not move. While troubleshooting, he leaned on the part, which then moved and pushed him backwards. He tripped and fell, landing on and fracturing his right hip.",1
"An employee was loading bags of ice when the ice machine became jammed. The employee was using a metal pole to unload the auger when the auger grabbed the pole and pinned the employee's left index finger to the machine, amputating the fingertip.",0
"An employee was feed-loading a board into the loading port or opening of a sap edger when the board kicked back out of the port, causing four of his left-hand fingers to be pinched between the ejected board and another stationary or slowly moving board on the conveyor.",1
"While installing metal decking, an employee slipped and fell 15 feet to ground level, suffering broken ribs.",1
"On 12/08/2016, an employee fell off the back end of his tractor-trailer at a customer's loading dock and suffered a severe concussion, requiring hospitalization.",1
"An employee was struck by a forklift and knocked to the floor. The forklift's right front tire then ran over the employee's right foot. He suffered a head contusion, sore left ribs, a laceration to his left hand between the thumb and index finger, and two broken toes on his right foot.",1
"An employee was putting plates on a tie under a rail when the tamper head fell off the rail, causing the rail to fall on and amputate the employee's fingertip.",0
"An employee was attempting to clear a clump of starch from an overhead duster when the plate that controls the flow of the starch closed and amputated the employee's right-hand index, middle, and ring fingertips. The machine was not locked/tagged out at the time of the incident.",0
An employee was attempting to separate two paper rolls (4-inch roll and 34-inch roll) with a knife when the knife was caught between the rolls and the employee's right index fingertip was pinched off. The paper roll machine was guarded at the time of the incident.,1
"An employee was attempting to free bridged material in a regrind feeder when an auger struck and amputated his right pointer, middle, and ring fingertips.",1
"An employee was ski-cutting to compact snow so that customers would not clip any ice and get hurt when he clipped ice on the ground and fell forward onto the snow, fracturing his leg.",1
An employee was tending to a machine when his right-hand index fingertip was amputated. The machine was running at the time of the incident.,0
"An employee was troubleshooting a treater machine when he received an electric discharge through his arm, with an entry burn at his fingers and exit burn at his elbow.",1
An employee was installing a robotic welder and finishing the cement grouting around the workstation when his right foot entered the service pit of an adjunct active robotic welder. The active robotic welder began its cycle and crushed/pinned the employee's right foot against the barrier guard and the welder. He suffered lacerations and fractures to the big toe and two adjacent toes. The active welder was guarded at the time of the incident.,1
"On 12/08/2016, at 4:08 AM, an employee was washing a processing line. The employee removed the cover plate from an auger, reached in, and suffered a left index fingertip amputation at the top knuckle.",0
An employee was sorting boards on a roll case conveyor when two boards came together and partially amputated his right little finger. He was hospitalized.,1
An employee was manually shaking out a PTO auger. His jacket got caught in the PTO resulting in a torn right bicep.,1
"An employee was operating a forklift when his foot was caught between the two pedals. While trying to get his foot out from between the pedals, he drove into a guardrail and broke his left femur.",1
"On 12/8/16, an employee was operating a packaging line when her arm entered the discharge opening of a case sealer and contacted rotating parts. Her left forearm broke and required hospitalization. The machine was guarded at the time of the incident.",1
"An employee fell while getting out of a dumpster and struck his head, requiring hospitalization.",1
An employee stepped onto a powered pallet jack and the jack moved suddenly striking and pinning another employee. The injured employee sustained a fractured pelvis.,1
"An employee was operating a reach truck when he collided with a support column. He suffered a laceration above the eye and chin, fractured jaw, possible concussion, and dental damage.",1
"An employee was replacing a valve on a vacuum tank and was attempting to remove two bolts using an air grinder. As he started grinding the first bolt, a flash explosion occurred. He suffered a cut on his head; received third degree burns to his hands, forearms, and stomach; and fractured his left leg. He was hospitalized and required surgery.",1
"An employee was walking on stilts to his working area. He was working in a computer room (raised floor) that was covered in tile squares. Someone had removed a carpeted tile and he fell between the false floor and carpeted sections of the floor, dislocating his left elbow and breaking his right wrist.",1
"An employee's leg gave out while conducting pre-track inspection training. The employee fell backwards and struck the ground, suffering a left shoulder injury that required hospitalization.",1
"While reaching for a package, an employee's hand was caught in a conveyor, de-gloving two fingers.",1
"An employee was stepping out of a box truck while carrying a squeegee tool when he slipped, fell to the ground, and was impaled in the abdomen by the tool. He was hospitalized.",1
An employee was using a saw to cut notches on a slab when the saw kicked up and lacerated the front of his throat.,1
"An employee was changing the  wheels on a cart when it fell off the shims, crushing and amputating his right ring finger.",0
"An employee was descending a 6-foot A-frame ladder when he lost his balance on the second rung and fell to the ground, breaking his hip.",1
"An employee was preparing a winder machine to start a new spool of twine. When she started the machine, it caught and damaged her right index fingertip, requiring surgical amputation.",0
An employee was walking on a dock and was struck by a forklift that was backing up. The employee suffered a broken right tibia and fibula.,1
"An employee was turning the landing gear on a tractor trailer when he lost his grip on the gear handle. The handle then spun around and hit his mouth, breaking his jaw and teeth.",1
"An employee was working on a tractor trailer and loading equipment for a customer. As he was trying to shut the back trailer door, the driver of the trailer pulled forward and the door closed on his left middle finger, partially amputating his fingertip.",0
An employee was attempting to thread a machine and position the zipper when the machine's roller amputated her fingertip.,0
"An employee was working on the radiator of a car. As he leaned over the front of the car, he injured his back and required hospitalization.",1
An employee had just checked the status of rolls at a computer station in the roll stock warehouse and started walking away when a clamp truck in the warehouse struck the employee. The employee suffered a right leg amputation (mid-shin) and five broken metatarsals on the left foot.,1
"An employee fell 5 feet to the ground while erecting a scaffold, suffering broken ribs and possible broken vertebrae. The employee was hospitalized.",1
"On December 9, 2016, an employee was processing clean dishes and putting them on a cart when she tripped and fell over a four-wheel dolly that was stored beneath a counter and protruded slightly beyond the edge of the counter. She fractured her right hip and right shoulder.",1
"An employee was caulking while standing on a ladder when he fell, injuring his neck and ribs. He was hospitalized.",1
An employee was walking beside a 26 ft. electric scissor lift when his right foot slipped and was run over by the left wheel of the scissor lift. The employee was hospitalized for fractured bones in his foot.,1
"An employee was removing a 700 lb. flange from the side of a winder coil of wire when the flange released and fell on the employee. The employee suffered a mild concussion, broken arm, and fractured L2 vertebra, requiring hospitalization and surgery.",1
An employee was tripping out rods on a servicing rig when his hand was caught above the rod transfer case near the swivel. His right arm was then caught and fractured on the rod transfer.,1
An employee was operating a power washer when the high-pressure water lacerated the employee's foot.,1
"An employee was using propane to heat up a solenoid on a diesel pump when the underground pump turned on, resulting in diesel making contact with the propane heater. The diesel and propane ignited, burning the employee's arms.",1
"An employee was struck by a water line that was being unloaded from a truck, suffering a fractured skull, broken ribs, and a cracked pelvis.",1
"An employee was closing an overhead door when the rope he was using to pull the door closed broke, causing him to fall to the concrete ground and strike his head. He suffered a head laceration and concussion.",1
"An employee was lowering a cable tray into the basement at the worksite when his left hand was caught in the rope, amputating his long and ring fingertips.",1
"An employee was walking through the parking lot to report to work when he slipped on ice and fell on the sidewalk, breaking his right elbow and requiring hospitalization.",1
"An employee had just come out of the restroom and was waiting by a stack of pallets. A coworker turned on his pallet jack and moved the handle, causing it to move in the wrong direction. The jack then hit the employee's left leg, breaking it above the ankle and requiring surgery.",1
An employee's hands were caught and lacerated in an ice milling machine.,1
"An employee was using a 6-foot step ladder to retrieve a box from an upper shelf when he lost his balance and fell to the floor, breaking his left ankle and requiring surgery.",1
"On 12/9/2016, at 7:50 p.m., an employee was pushing out a bar that fits into a metal core on a line winder. When he pushed the bar, his left index fingernail was caught on the core. As he pulled his finger back, his left index fingertip was amputated.",0
An employee went to sit down on her office chair and only caught the front edge falling and fracturing her left femur.,1
"An employee was pushing a money cart when the employee began feeling unwell. The employee sat down and had chest pains, tingling in his arms, and shortness of breath. The employee was hospitalized.",1
An employee was offloading cargo from a truck when a vehicle struck a hand-truck and the hand-truck then struck the employee. The employee was sent flying into the air and suffered a severed ear.,0
"On 12/9/2016, at approximately 9:10 a.m., an employee was walking to a conference room for a meeting. As she exited the elevator, she slipped and fell on the wet tile floor, which was being mopped at the time. She suffered a fractured tailbone and a hematoma, requiring hospitalization.",1
"While exiting the back of a truck trailer, an employee slipped on ice. The employee's index finger was then caught and fractured under the truck door.",1
"An employee was observing the separation of a gear box when a hydraulic ram struck the left side of the employee's face, injuring it above and below the eye.",1
"An employee was operating a horizontal boring mill when he stepped backwards and tripped over the tracks of the mill. He fell onto the concrete floor and fractured his hip, requiring surgery.",1
An employee was cutting steak meat on a band saw when the saw cut his left thumb and index finger.,1
An employee was clearing compound material (resin) from the hopper above a jammed extruder machine when his fingers became pinched between the hopper and the extruder. His left index and middle fingers were amputated.,0
"While unloading a trailer that contained donated goods, an employee made contact with the blade of a food processor that was inside a black garbage bag, requiring hospitalization for an arm laceration.",1
"An employee was going to turn off an escalator after a cable was cut when the zipper on his pants caught on the lever. The lever swung around and bumped the employee who then fell onto a drainage culvert. He suffered a rib fracture and a bruised lung, requiring hospitalization.",1
An employee was attempting to restart a reject conveyor when his arm was caught in the conveyor and pulled between the conveyor and its frame. He suffered a fractured right arm and shoulder.,1
"An employee was cutting a flat bar with an iron worker when the employee's finger was crushed and cut, suffering artery damage.",1
"An employee was clearing a fault in the pallet picker when the push bar activated due to a solenoid valve failure and crushed his hand, causing a compound fracture to his left thumb that required hospitalization and surgery.",1
"On Friday, December 9, 2016, an employee was helping a lift truck driver unload the truck when the truck driver backed up and drove over the employee's left foot, fracturing his big toe.",1
"An employee on a second-floor balcony was pulling plastic over a scaffold when a guardrail gave way, allowing him to fall from the balcony.",1
"An employee was moving rockers on the sales floor when her foot became stuck underneath a rocker, causing her to fall to the ground and fracture her hip. She required surgery.",1
"An employee was inspecting for leaks on a small 5-foot roof that extended above the main roof. The employee bent over, became dizzy, and slipped off onto the main roof, fracturing a wrist and ribs.",1
An employee was servicing a heating system (boiler) when it pre-ignited during purging. A fire ball came out of the inspection door and burned the employee's right and left arms.,1
"An employee was adjusting the rolls on a pellet mill and had to jog it when he noticed a burning smell in the firebox. He was attempting to remove a buildup in the pellet mill when his hand was crushed, injuring his left middle and ring fingers. His left ring finger was partially amputated up to the second knuckle.",0
"An employee was working on the compressed air line for a vessel and connecting a 2-inch hose to a valve in a bilge in order to flush a new pipe. He then stepped on the valve, which opened and released air that knocked off his safety glasses and blew metal debris into his eye. He was hospitalized.",1
"An employee was helping a customer at the counter when she tripped and fell, breaking her hip.",1
"An employee was walking near two chillers and attempted to step over some standing water on the ground when he lost his balance. He went to reach for a pole or bar, but instead his left hand fell into a chain and sprocket assembly, amputating his left middle and index fingers. He was hospitalized and had surgery. The chillers were guarded at the time of the incident.",1
"An employee slipped and fell on ice in the parking lot, suffering a fractured hip.",1
"While riding in a utility all terrain vehicle (UTV), an employee's right arm was caught and fractured between the UTV and a tree.",1
"An employee fell while carrying boxes down a flight of stairs, suffering contusions.",1
"An employee was cleaning around her work station when she tripped on a cable cover and fell, fracturing her right knee and shin.",1
"An employee was removing rust from a steel beam when the beam fell from a transfer table onto the employee's right foot, fracturing multiple toes. The employee was wearing steel-toed boots at the time.",1
"On December 10, 2016, an employee's hand was pulled into a conveyor belt while attempting to remove stuck rubber, amputating three fingertips.",0
"On December 10, 2016, at 9:30 a.m., an employee was removing shoring equipment when his right thumb tip was pinched and amputated between shoring and an I-beam.",0
"An employee was standing near a frame assembly while a crane was bringing in steel. The crane bumped the frame assembly clamp, which then failed and allowed the frame to fall over and strike the employee. The employee suffered a broken left leg.",1
An employee fell from a ladder while splicing lines between poles and was hospitalized due to a fractured lower right leg.,1
An employee was working on a water trailer pump that was under pressure. A part of the pump released and struck the employee in the lower leg causing a fracture.,1
"An employee was working on a cable line from a ladder when a neighbor's cable line came loose, causing slack in the line that the employee was working on. The employee lost balance and fell from the ladder, suffering a concussion, vertebral fractures, and facial fractures.",1
An employee was troubleshooting a leak in an air blast muffler when the muffler sheared loose from the flange and struck the employee in the back.,1
"An employee was operating a walkie rider outside the warehouse in the canopy area when the walkie slid into a canopy pole. The employee's right leg was caught between the pole and the walkie, causing a laceration and nerve/tissue damage to the employee's lower right calf. The employee was hospitalized.",1
The employee was using a chainsaw. When he set the chainsaw down he cut his knee with the chainsaw.,1
An employee was stocking freight when he felt faint and stopped to rest. He then collapsed and required hospitalization.,1
"An employee was walking through aisles to restock the shelves of a department store when she slipped and fell, injuring her back and hip and requiring hospitalization.",1
An employee was carrying a backpack that had a handgun holstered inside it. The backpack was dropped from where it was perched. The handgun then went off and shot the employee in the stomach. He was hospitalized.,1
"An employee was pushing a wire metal container full of packages from the building out to the postal vehicle to load it for delivery. Her hands were placed on the outside corners of the wire container and as she pushed the equipment toward the parking lot, her left hand was caught between a metal support beam and the equipment. Her left pinky suffered a compound fracture that required surgery.",1
"An employee was walking into work, slipped on ice and fell in the parking lot fracturing the left hip.",1
An employee tried to intervene during a fight in the parking lot and was stabbed in the rib cage.,1
"An employee was emptying trash from a small collection unit (hopper) into a much larger collection unit (roll-off dumpster). This required the employee to stage the hopper up and over the roll-off dumpster with a forklift and then dismount the forklift to manually pull a mechanical lever that releases the hopper vault and dumps the hopper contents into the roll-off. The employee grabbed the releasing handle with his right hand and placed his left-hand fingers on the bottom cross-section of the hopper between the bottom of the forklift fork and the hopper frame. When he released the hopper vault, the hopper frame sprang suddenly and violently upwards until it stopped by the bottom of the fork and created a pinch point. The employee's left-hand ring, middle, and index fingertips were caught and amputated in the pinch point.",0
"While inspecting a construction activity, an employee fell approximately 20 feet to a lower level and suffered a broken leg.",1
"On December 12, 2016, an employee was using an oxygen/acetylene torch while working on a semi tractor when a piece of metal flew off and struck the employee's right upper leg.",1
An employee was trying to clean an overhead vent/filter with a broom when the 4-pound filter fell out and hit her head. She suffered a head contusion and was hospitalized.,1
"An employee was helping to unload a coil rolling machine from a trailer. As the main body of the machine was lifted by crane, it struck the machine consul. The consul then fell off the trailer and struck the employee's back and thighs. The employee suffered a broken pelvis.",1
"An employee was entering a submarine when he slipped on the deck and strained his knee, requiring hospitalization.",1
"On 12/12/16, at 2:30 p.m., an employee was working on an assembly line and filling bags at the airlock bottom of a dust collector when four of her fingers were amputated.",0
"An employee was walking between machines when his left foot was caught on a slip roll pedestal. He fell to the ground and fractured his right tibia, requiring hospitalization and surgery.",1
"While cutting meat on a band saw, an employee's thumb tip was amputated by the blade.",0
"A crew was putting together a slide rail-style protective system. In the process, the injured employee was positioned on the right-hand side of the retaining wall. While the crew was positioning the wall into the positioning slots, the wall jolted to the right-hand side and pinched the employee's hand between the retaining wall and the slide rail. His right pinky and middle fingers were lacerated.",1
"An employee experienced a coughing fit and subsequently fell out of a chair, breaking two ribs and requiring hospitalization.",1
"An employee was operating a stand-up forklift when he struck a handrail, fracturing his left leg.",1
An employee suffered an asthma attack after being exposed to paint fumes.,1
"An employee was closing the bulk-head door of a package car when his finger was caught in the door, amputating his right middle fingertip.",1
"An employee was trying to strip an electrical cord but the strippers would not work on the cord, so he used a lighter to melt the insulation. The lighter ignited a gas leak and triggered an explosion, burning the employee's hands and face.",1
"Two employees were injured when a flash fire occurred on a rig. One employee was hospitalized with second degree burns, while the second employee was hospitalized for observation.",1
An employee was taking garbage out to the trash dumpster when his right pinky finger was pinched in the hinged portion of the trash lid amputating his fingertip.,0
"An employee was euthanizing pigs with a bolt gun when the gun shot the employee's left index finger, requiring surgical amputation at the middle phalanx.",1
"An employee slipped and fell on a wet floor in the kitchen area of a fast food restaurant, hitting his head and dislocating his left knee.",1
"An employee was attempting to restart a cooker's infeed screw. After locking out the equipment, he tried to pull the belts backward to get the screw motor to turn over. He then attempted to start the equipment. When the equipment started, the motor turned over and the belt caught his glove, causing his left index finger to contact the belt/pulley. His fingertip was amputated. The machine was unguarded at the time of the incident.",0
An employee and a coworker were rolling tubes with flanges on the ends when the employee's pinky finger was crushed and amputated under the flange.,0
"While standing on a 6- to 8-foot ladder and pulling electrical wires through a conduit, an employee fell to the ground.",1
An employee was assisting a customer to unload a pickup truck. A pallet got stuck. The employee pulled to break the pallet free and fell backwards onto the ground. The employee suffered an L1 compression fracture.,1
An employee was walking down the stairwell and fell. The employee was hospitalized with a head injury.,1
"An employee replaced a hydraulic cylinder in a packer press. Then the machine was cycled to test it. While observing the cylinder cycle to ensure there were no leaks, the employee's hand entered the machine and his right index fingertip was amputated.",0
"An employee was setting up concrete cylinder targets on a gun range. A forklift was pressing a metal plate against the cylinders to help position them tightly as the employee was using his hands to position them. His thumb was then caught between the metal plate and concrete cylinder, tearing some skin off his thumb tip and requiring surgical amputation.",0
"An employee was setting/welding a door onto a truck. The door was being supported by a crane. After the door was welded and the support was removed, the door slid off from the truck and pinched the employee's right index fingertip, amputating it.",0
"On December 12, 2016, at approximately 11:10 a.m., an employee was using a hand-operated pallet mover to retrieve a pallet from the bulk storage area. As she moved the machine backwards, her hand was caught between a steel upright and the handle of the machine, fracturing her right hand and right ring finger.",1
"An employee was connecting a cable that had been looped around a pipe to hook the pipe onto an excavator bucket and lay it across the highway. As the excavator operator raised the boom, the employee's hand became caught between the cable and the hook, amputating his left index fingertip.",0
An employee was using a hose to wash crankcases with a cleaning solution when the hose nozzle came loose. The solution then pumped out and entered the employee's eyes and mouth. The employee was hospitalized with internal injuries.,1
"An employee was unloading food from a tractor-trailer. He exited the trailer and proceeded down a ramp with a two-wheel dolly that was loaded with food product. He then lost his footing, fell forward on his knees, and rolled approximately 3 feet off the side of the ramp onto the ground. He ruptured the bilateral tendon in both knees.",1
"An employee had been working on a telecommunication cable from a 28-foot extension ladder when a passing motorist found him unconscious on the ground. He was hospitalized for broken ribs, a concussion, and bleeding on the brain.",1
"While cutting a 2 x 4 piece of wood with a miter saw, an employee suffered amputations of the index to ring fingers.",0
An employee was polishing the rotating shaft of a lathe with an emery cloth when his hair was caught in the lathe. He suffered scalping and a possible scapula fracture.,1
An employee was walking on a ramp and slipped and fell. The employee was hospitalized with a head injury.,1
An employee was putting bags on a 16-inch by 20-foot ductile iron pipe that was resting on the forks of a skid steer. The employee was standing in front of the open forks when the pipe rolled off and landed on and broke the employee's left leg and foot.,1
An employee was taking a tire off a tire balancing machine when his finger was pinched between the shaft of the tire balancing machine and the rim of the tire. His left index finger was partially amputated.,0
"An employee was installing wires on an electrical box when a worker at the jobsite energized the box, which then burned the employee's right palm. He was hospitalized overnight.",1
"An employee was removing rope from a pipe on a blast booth machine when the machine indexed to move the pipe. The employee's gloved hand became tangled in the rope, and the index fingertip was amputated between the pipe and the machine's roller.",0
"On December 13, 2016, at approximately 2:30 p.m., an employee was climbing an extension ladder to access the roof of a residence when he fell approximately 12 to 15 feet to the ground, fracturing his back. The top and bottom of the ladder were secure at the time of the incident.",1
"While walking to a house to deliver the mail, an employee slipped on ice and fell, suffering a broken left ankle.",1
"On December 13, 2016, an employee was replacing some underground piping and removed a section of existing pipe. The existing pipe then shifted and pinned the employee's left forearm, injuring it.",1
An employee was trying to move product in a hopper when the blades amputated two fingers.,0
"As an employee was rolling a 200-pound paper roll, another roll behind him became unstable and rolled onto his left leg, breaking it.",1
"An employee was performing a demolition operation from an aerial lift when a suspended load struck the employee. The employee was knocked out of the lift and fell 14 feet, suffering a serious injury.",1
"An employee suffered pneumonia, requiring hospitalization, after sealing tiles with a chemical sealer. PPE was not worn at the time of the incident.",1
"An employee was trying to remove packages from a chute and was unable to remove one due to a closed dock door. The employee then opened a loading bay door believing a trailer was in the bay to be entered. The employee stepped off the dock bay surface and fell 46 inches, suffering a punctured lung and pelvic and rib fractures.",1
An employee was driving her forklift away from the battery charging area. She jogged the direction of the forklift slightly and was attempting to correct the direction when she lost control and her left foot went outside the forklift. Her foot then became pinned between a rack and the forklift.,1
"While operating ground support equipment, an employee attempted to activate the door control button of a hanger door. The equipment then collided with the hanger door, which caused the employee's left forearm to be caught between the two objects. The employee's left forearm was swollen and severely bruised, requiring surgery.",1
An employee was walking around the back of a vehicle to use his ID to raise the employee entry gate when he slipped on ice and fell to the ground. He broke his right tibia and fibula as a result of the fall.,1
"An employee slipped and fell on ice while exiting a car in the parking lot, breaking the left ankle and requiring surgery.",1
"An employee slipped and fell on an icy walking surface in the parking lot, suffering a fractured left leg.",1
"An employee was trying to free a piece of material that was stuck in a conveyor when his right hand was pulled into the conveyor, resulting in a broken radius and ulna. He was hospitalized. The conveyor was moving at the time of the incident.",1
"An employee was helping to operate a scrap saw and was ensuring plastic would feed through it when a coworker activated the saw, severely cutting the employee's right arm. He required surgery. The saw was guarded at the time of the incident.",1
"Employees were moving steers from one pen to new pens. The steers were being moved through a gate opposite of the feed bunker into an alley to another pen. A group of steers was facing the employees and away from the gate. All of a sudden, one of the steers in that group put its head down and rammed an employee who was standing next to the water trough. The employee was driven backwards and into the bar of the feed bunker. The steer pushed the employee against the feed bunker with its head several times and then flipped him over into the feed bunker. The injured employee sustained multiple closed pelvic fractures with disruption of the pelvic ring. His left side/leg was also significantly affected.",1
"An employee was cleaning a three-roll mill when his right hand was caught between the skirt and the rolls, cutting two tendons and requiring surgery.",1
"An employee was stepping off the platform floor of a print shack when she tripped and fell to the ground, fracturing her left femur.",1
"An employee was standing just outside the jobsite fence to direct a truck driver to the truck wash-out area inside the construction site when a driver struck the employee with a public vehicle, fracturing his left tibia.",1
"At approximately 10:01, an employee entered a break room to obtain a locator badge when she slipped and fell near the sink. She injured her left knee and required surgery.",1
"On 12/13/16, an employee was cutting a piece of wood on a table saw when the wood jumped and the employee's thumb was pulled into the blade. His left thumb was severely lacerated.",1
"An employee was attacked by a resident, suffering head injuries that required hospitalization.",1
"An employee was building a bridge girder when his left middle finger was caught between the flange and a splice plate, amputating his left middle fingertip without bone loss.",0
"An employee tripped on shoelaces and fell to the floor, suffering a broken hip.",1
"An employee slid off a damp roof and fell approximately 9 feet to the ground, sustaining a broken ankle that required hospitalization.",1
"An employee climbed up a column and tied his positioning hook onto a rubber cage. The hook did not fully engage on the plywood form and when he leaned back, the hook slid off. He fell backwards approximately 4 feet to the ground below, requiring hospitalization.",1
An employee was adjusting a plate using a shim. The side planer was activated and the employee's right index fingertip was amputated.,0
An employee slipped on a wet floor and fell fracturing their back.,1
An employee was walking to his car in the parking lot when he slipped on ice and tore his patellar tendon.,1
An employee ingested methanol and required hospitalization.,1
"An employee was performing forklift/rigging operations (material handling) with a telescopic handler (telescoping forklift). While adjusting the forks on the handler, the employee's right index finger was caught in a pinch point between the adjustment box and the forks, lacerating and fracturing it. The finger was amputated down to the first knuckle.",0
"An employee was helping to move a large heating/cooling piece of equipment when one of the panel doors fell off and struck his leg, contusing his thigh. His leg became swollen and required hospitalization.",1
"An employee was crushed between an excavator and another piece of equipment, requiring hospitalization.",1
"An employee was vacuuming mud at the bottom of a hill when the mud vacuum trailer rolled down the hill and hit him, pinning him next to a drilling unit. He suffered ankle, arm, and jaw injuries that required surgery.",1
"On December 14, 2016, an employee was operating the vertical mill and removing shavings from the bit when the employee's right index finger was partially amputated.",0
An employee was nailing wooden boards against the rafters in an attic with an air-actuated framing nail gun when the recoil caused the gun to kick back. The gun hit the rafter behind him and then struck and penetrated the top of his left hand. The gun was in contact actuation mode at the time of the incident.,1
"An employee was using a scissor lift to mount a machine that shoots clay pigeons from 20 feet in the air. The scissor lift would not lower all the way to the ground, so the he attempted to troubleshoot the problem. When he tried to grab a wire underneath the fold of the lift that may have been the problem, the lift came down on top of his left arm. He was hospitalized with nerve damage.",1
An employee was unloading small packages from a conveyor belt when his right thumb was caught and amputated between the belt and the roller.,0
"An employee slipped on ice in the parking lot and fractured his left leg, requiring hospitalization.",1
"An employee was operating a cement mixer that was covered with a tarp due to extreme cold temperatures. The tarp covered the mixer's exhaust and trapped carbon monoxide vapors, which the employee inhaled.",1
An employee sustained severe burns from a temporary heater while working inside a mason's enclosure.,1
"An employee was operating a horizontal bender machine to bend rebar. While he was adjusting the rebar for the second bend, his foot contacted the footswitch and activated the machine, which then crushed/amputated his right index finger.",0
An employee was using a hand grinder with a wire wheel to buff the side rail of a panel form when the wheel grabbed a piece of tie wire and whipped it around. The wheel hit and amputated his left middle fingertip.,0
"While adjusting a dock plate, an employee lost balance and fell off the dock, suffering a left elbow fracture.",1
"An employee was drilling and installing a pipe into a large concrete digester when the flare went out, creating additional pressure in the digester. The pressurized digester gas shot through the short section of 6-inch pipe, knocking the employee 5 feet off a scaffold to the concrete floor. The employee was exposed to hydrogen sulfide, stopped breathing, required CPR, and suffered a shoulder injury.",1
An employee was exiting a room and closing the door when the sliding door handle amputated the employee's right little fingertip.,0
"While securing cages to a trailer, an employee was struck by a reversing forklift, suffering fractured ribs.",1
"An employee used a foot step to climb on top of a 6-foot-tall mud tank to de-sand cones, which needed to be repositioned. When he attempted to reposition the cones using his hands, he lost his balance and fell to the ground, breaking his collarbone and six ribs.",1
"An employee was drilling a piece of metal with a magnetic drill when the bit bound, causing the drill base to spin and amputate the employee's left index fingertip.",1
"While operating a stand-up forklift in a warehouse aisle, an employee was struck by a second forklift traveling in the same direction. The employee's left leg above the ankle was caught between the first forklift frame and the clamp of the second forklift.",1
"An employee was operating a powered industrial truck when he collided with a coworker who was also operating a powered industrial truck. His left hand was caught between the two trucks as they collided, requiring hospitalization.",1
"An employee fell from storage racks to the concrete floor, suffering broken ribs and a head injury.",1
"An employee was operating a cartridge seal machine when the machine jogged, pinching her finger between the seal transfer and seal cutting die. Her left index finger was amputated at the first knuckle. The machine was guarded at the time of the incident.",0
An overhead garage door was stuck in the open position. An employee was standing on a bus to reach the overhead door and fell off the top of the bus to the ground. The employee fell approximately 10-12 feet and injured their wrist and hip.,1
"An employee was using a water hose to help cool down a tank of molten zinc solution during the pumping transfer process when the water came into contact with acid/residue and a violent chemical reaction and explosion occurred. The water with molten acid solution blew into the employee's face and back as he turned to run, causing second degree burns that required hospitalization.",1
"An employee was unloading his trailer on a snowy dock surface. When he went to lift the dock plate, he lost his balance and fell onto his right hip, fracturing it and requiring hospitalization.",1
"On 12/14/16, an employee was operating a horizontal band saw when the blade moved unexpectedly, amputating the left ring fingertip and lacerating the left middle finger.",0
A dock plate fell on an employee's hand and amputated a fingertip.,0
"An employee was using a 4-foot step ladder to re-install a small overhead door contact when he fell from the ladder to the concrete floor, suffering a concussion and serious head trauma.",1
"On December 15, 2016, at approximately 1:00 PM, an employee was pulling boxes when she lost her balance and fell. As she was falling, she attempted to break her fall with her hand and suffered a broken wrist. She was hospitalized and had surgery.",1
An employee was setting up a die-cutter when it cycled and severely lacerated his right hand and amputated the index finger.,1
"On December 15, 2016, an employee was operating a book binder cutter when the machine jammed. As he attempted to clear the jam, the blade came down and amputated his left ring finger's first knuckle.",0
"An employee was attempting to hook up a ground heater to a truck, but the trailer wasn't hooking up properly. His finger was between the ball hitch and receiver when the trailer dropped onto the hitch, pinching his left ring finger. His fingertip was amputated.",1
An employee was preparing to offload a compressor from a delivery truck and slipped on snow that had accumulated on the lift gate.  The employee fell into the bed of the truck and the compressor landed on and fractured his ankle.,1
"An employee was moving a conveyor belt when it slipped and fell on his lower leg, breaking his right ankle.",1
"On December 15, 2016, an employee's right thumb was pinched between metal and a jig as the employee was placing a steel part in the jig. The employee suffered a right thumb fracture.",1
An employee's pinky fingertip was amputated by a pulley.,0
"An employee was walking into work in the parking lot between some cars when she slipped on the icy surface and fell, fracturing her leg/ankle.",1
"While unloading supplies from a truck, an employee slipped on ice and broke an ankle.",1
"On December 14, 2016, an employee fell in the snowy parking lot while on the sidewalk and was hospitalized for a broken hip.",1
"An employee and a coworker were placing a cold case (refrigerator) into a counter when the coworker lost his grip, causing the employee to also lose his grip. The employee's right-hand pinky finger was caught between the cold case and the counter, amputating it at the first knuckle.",0
"While walking during rounds, an employee stepped on a section of ground floor trench cover. The trench cover shifted, causing the employee to fall into the 2.5 feet deep trench and suffer a broken right leg.",1
"An employee was terminating underground cables in a three-phase switching cabinet when an arc flash occurred, causing first and second degree burns to the employee's face. The employee was hospitalized.",1
"While driving a scissor lift to install a sprinkler system, an employee drove over a hole that had been covered by plywood. The wheel fell into the hole, causing the scissor lift to fall over. The employee fell with the lift and suffered an injury.",1
"An employee was lifting a board from a pallet when his fingers were smashed between the board and pallet, amputating his right thumb tip and index fingertip.",0
"An employee was delivering parcels when he slipped on black ice, breaking his lower right leg and right ankle in two places.",1
"A temporary employee fell while descending a 6-foot ladder, fracturing the left hip.",1
An employee was dumping trash from a can into a hopper when a piece of debris struck and cut him above the eye. He was hospitalized.,1
"An employee was helping to move jersey barriers from a corner to clean up for a storm water inspection. A coworker was lifting the barrier with a skid steer that had forklift forks installed. One corner of the barrier was elevated on the forks approximately 10 inches high when the employee went over the barrier to move a tool that was in the way of where they were moving the barrier. When he was on the other side of the barrier, the concrete corner that was elevated broke off of the barrier. The barrier then fell sideways onto the employee, pinning him between the fallen barrier and the street curb and breaking his left leg.",1
"An employee's left index finger was caught between a chain and a 1,500-pound part that was being lifted by an overhead crane, partially amputating the fingertip.",0
"An employee was tracing a water pipe through a large warehouse with coworkers and climbed on top of an indoor office area to trace the line. The employee then fell through the roof/ceiling of the office, breaking an arm and suffering possible internal injuries.",1
"An employee was unloading a coil from a forklift when the forklift pinched the employee's hand, crushing the right ring finger. The finger had to be amputated.",0
"An employee stepped off the edge of a roof while dragging a roof sheet, falling to the next lower level and breaking ribs.",1
"An employee was cleaning a cat run and was in the process of placing the cat back in the run when it bit the employee's right hand, requiring hospitalization.",1
"An employee was delivering an auto part when he slipped and fell on ice in the customer's parking lot, shattering a bone in his left lower leg.",1
An employee was operating a punch press when the employee's right hand got through the safety light curtain and activated the press. The press then amputated the employee's right index fingernail and half of the distal phalanx bone.,1
An employee was attempting to unjam a mixer when the machine amputated two of his fingers.,1
"While walking into the post office, an employee slipped and fell on ice, fracturing her tibia.",1
An employee was clearing a jam on an assembly machine when the machine cycled and amputated the employee's right middle fingertip.,0
An employee was trying to catch a feral cat in the store when the cat bit the employee's hand.,1
"An employee was cleaning up debris and creating a drywall barrier. When he shifted the drywall, it fell on him, breaking his right tibia and fibula.",1
"An employee's index finger was caught in the chain of a conveyor belt, amputating it at the first knuckle.",1
An employee was working on a stepladder and fell fracturing the right hip.,1
"An employee was climbing a ladder while holding a garden hose nozzle when he slipped and fell onto nearby truck equipment, breaking two left-side ribs.",1
"An employee slipped and fell on ice in the parking lot, suffering a broken ankle.",1
"While installing purlins on a roof system, an employee fell 14 feet from the roof to the ground, cracking two vertebrae and requiring hospitalization.",1
An employee was using a rag to find the source of a leak on a tractor transmission when the rag became stuck in a flywheel and subsequently pulled the employee's hand into the flywheel. The employee suffered a right-hand laceration that required stitches.,1
An employee was participating in concrete stress testing operations. A stress cable retention chuck slipped causing the cable end to flip and puncture the employee's right hand and abdomen.,1
"An employee was hit by a car while walking, breaking an ankle and requiring hospitalization.",1
"While inserting stacking cones into the bottom of suspended shipping containers, an employee was struck by the rear wheels of a forward-moving empty hustler truck, suffering pelvic injuries.",1
"An employee was discharging water from a truck drum when he slipped while standing at the exterior control. He fell and struck his jaw on a truck fender, breaking it and requiring hospitalization.",1
An employee was sawing wood with a table saw when the blade amputated two fingers. The saw was unguarded at the time.,0
An employee suffered a finger amputation.,0
"An employee was feeding metal through a pneumatic metal saw when his glove was caught in the saw blade. His left hand was then pulled down and his left index finger and hand was severely lacerated by the saw blade, requiring surgery.",1
"An employee fell on icy residential stairs while delivering mail, breaking the left ankle.",1
"An employee was standing on an air line when a coworker yanked on the line, causing the employee to fall and land on a stack of metal bars. The employee fractured some ribs and was hospitalized.",1
"While loading a mail truck, an employee slipped on a slick, icy parking lot, breaking an ankle.",1
"An employee was removing wall flashing when he fell approximately 30 feet from the roof to the ground below, bruising his right-side ribs.",1
"An employee was walking to her vehicle, slipped on ice and fell. She sustained an elbow injury that required surgery.",1
"On December 16, 2016, an employee was inspecting a ball valve for correct assembly and testing it using air. When the air was applied, it caused the valve to close on and amputate his left index fingertip.",0
"On December 16, 2016, an employee was mopping the floor when she twisted her torso and injured her back, requiring hospitalization.",1
An employee was cutting meat with a saw and amputated his right thumb tip.,0
An employee was attempting to remove poly film lid debris from a filling machine when the employee's right thumb was caught and amputated in the machine.,0
"An employee had just installed a windshield in a vehicle and was putting his tool away. He attempted to use the handle of a scraper to push a plastic clip into the cowl when the handle of the scraper, which had a razor blade attached to it, slipped off and cut his left thumb tendon, requiring surgery.",1
"An employee was lying on a floor dolly on his back underneath a newly fabricated bin weighing approximately 1,000 lbs. The bin was supported on all four corners by 6-foot-long metal saw horses. The employee was painting the underside of the bin using a spray gun. When he attempted to scoot the dolly along the floor, his foot pushed against one of the saw horses, causing it to move. The saw horse pivoted out from under the bin, which then tipped and fell on the employee, breaking his arm.",1
"On 12/17/16, an employee was adjusting a frozen mirror when the mirror snapped and lacerated the employee's right hand, requiring surgery.",1
"An employee was getting out of her vehicle to pick up a piece of mail that had fallen when she slipped on ice, breaking her left ankle and left leg. She was hospitalized and had surgery.",1
"On December 17, 2016, an employee was attempting to clear a jam during a plastic grinding process when the airlock's rotating mechanical paddle wheel caught the employee's hand. The employee's left middle and ring fingers were amputated at the second knuckle.",0
"An employee volunteered to help a duty crew repair a downed power pole. The powerline was grounded and open during pole erection and rehanging of the wire. The employee went to energize the transformer and measure the stinger when he contacted the energized wire, sustaining burns to both hands and a dislocated shoulder. He was hospitalized and required surgery. Gloves were not worn at the time of the incident.",1
"An employee was working outside around a stationary pipe when his lower left leg contacted the pipe, breaking his shin bone.",1
An employee was walking on a sidewalk and slipped on ice and fell. The employee was hospitalized with a head contusion.,1
"While exiting a security vehicle, an employee slipped on ice and hit the right knee and arm on the pavement. The employee suffered abdominal pain, vomiting, and a headache.",1
"On December 17, 2016, an employee was walking to deliver a parcel to a residential home when he slipped on an icy driveway and fell to the ground, fracturing his hip.",1
"An employee was cleaning a conveyor well when the cuff of the employee's coat became caught on the conveyor and pulled the employee's right arm into the sprocket, fracturing it. The conveyor was not locked/tagged out at the time of the incident.",1
"An employee was driving a loader during a concrete mixing process. While he was dumping the loader bucket on top of a bin, some frozen pieces would not go through the bin's grate. He climbed a ladder to retrieve the pieces. He then slipped off the bin and fell 10 feet to the ground, injuring his ankle.",1
"An employee was operating a boring bar when the drawstring on his hooded sweatshirt became caught on the spindle. The boring bar then fractured his arm, requiring hospitalization.",1
"An employee was walking from the parking lot to the facility when she slipped and fell on ice, breaking her hip.",1
"On December 17, 2016, at 7:30 a.m., an employee was jogging a machine while attempting to adjust a poly wrapper when a plate came down and amputated his left middle fingertip.",0
"An employee slipped and fell on ice in the parking lot, suffering a concussion and a fractured shoulder. The employee was hospitalized.",1
An employee was attempting to set up a trench box when the box shifted and his knee was caught on a spreader bar. His foot was then compressed to his heel in the storm culvert.,1
"An employee was manually turning the gears to a slitter machine that had just been cleaned when his right middle and ring fingers were caught in the gears, pinching and amputating the fingertips.",0
An employee was changing the motor on a machine when the motor slipped and amputated his left index finger.,0
"An employee was inspecting a hotel room when her right-hand pinky finger was caught in a closing door, lacerating her finger and requiring hospitalization.",1
"An employee slipped and fell on a wet floor while bringing dirty dishes to the dish tank area, injuring the left leg and hip.",1
An employee was working in the laundry area when the industrial ironer caught on fire due to a faulty belt. The employee was hospitalized for smoke inhalation.,1
"An employee was cleaning a card machine's rollers. When the employee removed the roller belt, the rollers moved and pulled the employee's left arm between two rollers. The employee suffered a left forearm avulsion and partial amputation of the left pinky and forefinger.",1
"An employee was working on the press. When he knelt down to check the scrap conveyor belt, his right index finger was caught in the chain and sprocket. The fingertip was later amputated.",1
An employee was placing trash in a trash compactor outside the back of the store when the sharp metal edge of the compactor avulsed his right middle finger. He was hospitalized and required surgery.,1
"While exiting a car, an employee slipped and fell on ice in the parking lot, fracturing the left hip.",1
"On 12/18/16, an employee was walking up the basement steps while carrying a few packages of frozen meat when she missed the top step, lost her balance, and fell. When she attempted to brace herself from the fall, her right hand went though the lower tier window of the back door, severely lacerating her right wrist.",1
"On December 18, 2016, an employee fell off a bolted 30-foot ladder while trying to cover a hole on top of the burr house cyclone. He hit his head on the ladder rail and injured his spine during the fall to the ground, requiring hospitalization.",1
"An employee was monitoring the production line when he saw that a board on the line was not straight. As he attempted to straighten the board, his left ring finger was caught between the board and a flapper, amputating it just below the fingernail.",0
"An employee was preparing to mix batter in a commercial mixer. When the machine started, the bowl started to move out of the frame. The employee attempted to catch the bowl and his hand was caught between the frame and the bowl, pinching and amputating a finger.",0
"An employee was throwing bales of hay over a fence when he slipped and fell on the frozen ground, breaking his hip and requiring hospitalization and surgery.",1
An employee slipped on small pieces of candy and fell to the floor. The employee was hospitalized with head and wrist injuries.,1
"An employee was driving a tractor trailer on the highway when she encountered icy road conditions. The tractor trailer made contact with a pole on the side of the road. The employee pulled off of the highway and into a parking lot. She stepped out of the vehicle to check for damage. While outside of the vehicle, she slipped and fell on the ice, breaking two bones in her back.",1
"An employee had been outside shoveling ice and snow from the walkway. When he entered the restaurant, he slipped and fell on the floor of the lobby, fracturing his right hip and requiring hospitalization.",1
An employee was working with students to complete their models in the fabrication laboratory when the CNC router room caught fire. The employee suffered smoke inhalation injuries and was hospitalized.,1
An employee was moving from a ladder onto a pile of slag when he fell into the slag and broke his left leg.,1
A spark from an unknown source caught an employee's shirt on fire. The employee suffered burns and was hospitalized.,1
An employee was lashing and securing military cargo. A nearby Bradley Fighting Vehicle (BFV) operator was backing up a Bradley when she pulled the throttle instead of the fuel shut-off. The Bradley then hit a second Bradley and pinned the employee between the Bradley and the wall. The employee suffered two broken ribs and a punctured lung.,1
"An employee became dizzy and slipped on ice in the terminal lot, suffering a hip injury and requiring hospitalization.",1
"On December 19, 2016, an employee was delivering a parcel when he slipped on ice and fell, striking his head on the ground. He suffered a brain hemorrhage and was hospitalized.",1
"On December 19, 2016, at approximately 2:30 p.m., an employee was working from an elevated bucket truck to top a tree when the tree top broke away, causing the attached guy-rope to pin the employee against the bucket under the weight of the tree top. He suffered broken ribs and broken vertebrae.",1
An employee was demolishing old railroad tracks and moving rails from the track. He was attempting to hook the rail dog machine up on to the old rails that were lying on top of some old cross ties when the rail slid off the top of the cross ties and fell on and fractured his right foot.,1
"An employee was moving from one steel girder to another when his foot became caught on a beam. He lost his footing and fell 14 feet, 10 inches to the ground below, breaking his right knee and lacerating his chin.",1
"An employee was pushing a dryer rack cart when his left hand was caught between two carts, amputating the tip of the third digit on his left hand.",0
"On December 19, 2016, at approximately 2:55 p.m., an employee opened the 600 amp of an electrical air switch using the handle on the outside of the switch cabinet. He opened the door on the compartment containing the switch, which has a fiberglass barrier hanging vertically in the compartment. He raised the bottom of this barrier to slide it into a slot designated to hold it in place between the two electrical contacts on the air switch. As the barrier was being slid into place, an arc flash occurred, causing second degree burns to his face that required hospitalization.",1
An employee was stepping down a ladder while restocking shelves when he missed a step. He reached out to catch himself by grabbing the shelving and his left ring finger was caught and amputated in the grid of the shelf.,0
"An employee slipped on ice while entering a car, suffering a broken hip.",1
"An employee was stepping out of a vehicle to deliver mail when he slipped on the icy pavement and fell, suffering a C5-C6 disc protrusion in the neck. He was hospitalized and had surgery.",1
"An employee was erecting a portable ready mix concrete plant and was lifting steel plates into position when one of the plates became unattached from the boom and fell on the employee's foot, amputating three toes.",1
An employee was standing next to his vehicle when a runaway truck rolled down a hill and pinned him between the two vehicles. He suffered fractures.,1
"An employee fell 20 feet from a roof resulting in broken ribs, a bruised kidney, and fluid in the lungs.",1
"An employee slipped and fell on an icy sidewalk while delivering mail, suffering a compound ankle fracture.",1
"A temporary employee was operating the protein mixer when the extruder stopped extruding. He began pulling out the protein when he contacted the mixer's metal blade, amputating his middle and ring fingers to the second knuckle and index finger to the first knuckle. The mixer was running at the time of the incident.",0
"A trailer sub-frame assembly was sitting on three jack stands and an employee was using two bottle jacks to raise the axles so he could install the wheels. The trailer became unstable and shifted, causing the assembly to fall on and break the employee's femur.",1
"An employee was walking out to the parking lot when he stepped off a curb onto the asphalt, slipped on black ice, fell backwards, and struck the back of his head on the curb. He suffered a head laceration and brain hemorrhage.",1
"An employee was operating a stand-up forklift when he lost control while going down a sloped area. The forklift tipped over and his left foot was caught between the forklift and the curb, smashing his second toe, which had to be surgically amputated.",1
"An employee exited her vehicle, walked across the parking lot, slipped on ice, and fell onto the ground. She struck her head on the pavement and lost consciousness.",1
"On December 19, 2016, at 7:45 p.m., an employee was operating an electric forklift in the freezer to go pick an order when the employee struck a storage rack upright. The employee's right foot was caught between the forklift and the rack, resulting in lacerations that required stitches and two broken toes. The employee was hospitalized for surgery.",1
"An employee fell 4 feet off the loading dock while bending over to pick up a box, suffering left wrist and right ankle pain.",1
"An employee was troubleshooting a product non-conformance. While doing so, the employee suspected that the machine (tapering mill) had been set up or repaired incorrectly. After turning off the work cell, which this machine is a part of, the employee entered the work cell to verify the machine was set up correctly. The employee was attempting to adjust the machine's tapering rollers when four left-hand fingers were caught and fractured in between the rollers.",1
"An employee was mooring a vessel when the employee's right ring finger was caught between the mooring line and a metal cleat, amputating the fingertip.",0
"An employee was felling a declining ash tree. When the tree came over, it became hung up on a smaller oak tree, lifting the butt of the ash tree in the air. The butt of the tree then came down on the employee who sustained a broken right fibula.",1
An employee was feeding paper through various rollers on a paper converting machine when his left index fingertip was caught and amputated in an ingoing roller nip.,0
An employee was cutting meat with a band saw when the saw amputated his right index fingertip.,1
An employee was loading produce into the trailer. As the employee was closing the trailer door his finger got caught on the latch used to lock the door in place.  The employee's right index fingertip was amputated to the base of the nail. The employee was wearing gloves at the time.,1
"An employee was plugging in a grinder to remove a metal piece from the floor. When he placed the plug into the socket, he was shocked and thrown back about 3 feet.",1
"An employee was rigging a load that was on a forklift when the forks lowered and struck his left foot, fracturing it.",1
"An employee was taking trash out of a construction trailer when he tripped and fell to the ground, spraining his left shoulder.",1
"An employee was attempting to repair a small portable pneumatic barrel pump that appeared to be frozen. The employee had his left ring finger inside the pump plunger when it activated, amputating his left ring finger.",0
An employee was injured after slipping and falling in a room.,1
An employee fell while walking into an office.,1
Employees were cleaning up the warehouse area when a bundle of boards fell onto an employee striking their head. Two hours later the injured employee suffered stroke-like symptoms and was hospitalized.,1
An employee started the truck while standing on the side step. The truck was in gear. The employee fell and the truck ran over his leg fracturing the fibula.,1
An employee was removing dunnage from under a rig when the right index finger was caught between the dunnage and the stem of the jack resulting in a fingertip amputation.,0
An employee fell from a height of 31 inches while attempting to connect an unloading hose to the back of a truck. The employee tripped and attempted to catch himself by taking a step back resulting in the fall. The employee's right tibia and fibula were fractured.,1
"An employee was loading a trailer with freight when an unsecured axle tipped over and landed on the employee's right foot, breaking the big toe and lacerating three other toes.",1
"A forklift was lifting a double stack of trailer fenders when the top pallet of the stack fell onto the forklift. The pallet broke and trailer fenders fell onto the injured employee, who was standing nearby supervising the operation. The employee sustained a broken nose and two broken ribs, requiring hospitalization.",1
"An employee was unbolting a storage tank when he stepped on a 3-foot segment of a grated platform that was not secured. He then fell 15 feet to the concrete floor below, breaking his left hip and requiring overnight hospitalization.",1
An employee was fabricating pipe and components on a jig at a client location when the components rolled off the jig and landed on his waist and right leg. He suffered internal injuries to the abdomen and trauma to the right leg.,1
An employee's forearm was caught in a mixer.,1
"An employee was operating a jelly cup packing machine when it became energized. The employee's left index finger then contacted a moving part, amputating the distal tip.",0
An employee was performing maintenance on a grain bin auger and amputated the right thumb and index finger.,1
An employee was resting their right hand on a test stand when a piece of the test (shielding) equipment fell onto the employee's hand resulting in a partial amputation of the right ring fingertip.,0
An employee was unloading light poles when a pole slipped from his hands. He tried to stop the pole from falling with his leg and suffered a right upper thigh injury that required hospitalization.,1
An employee was cleaning steel by hand file and grinder and began experiencing shortness of breath and tightness in the chest. The employee was hospitalized for a heart attack.,1
"An employee was loading a hydraulic hammer into the back of a truck when he lost his footing and control of the hammer. It then rolled back and caught his hand between the hammer and the bucket of the tractor, amputating his left ring finger.",0
"On December 20, 2016, at approximately 3:30 p.m., an employee was cubing meat in a tenderizer when the meat became stuck. While she attempted to remove the meat from the tenderizer, the rollers caught the glove of her left hand and pulled her index and middle fingers into the tenderizer, fracturing both.",1
"An employee was responding to a patient's call, tripped over the call light cord, and fell fracturing the left hip.",1
"On December 20, 2016, an employee was placing a pallet when his forklift ran out of fuel. He had dismounted the forklift when a coworker on a forklift backed over his left foot, breaking two toes.",1
"An employee was struck by a forklift while unloading freight, injuring the right ankle.",1
"An employee was attempting to hook the tongue of a baggage cart to the hook on a tug vehicle when the tug driver's foot slipped off the brake pedal and onto the gas pedal. The tug was in reverse and moved backwards, hitting the employee and pinning him between the vehicle and the baggage cart. He suffered a severe fracture to his left leg that required hospitalization.",1
"An employee was working in the anodize department when an anodize color power supply unit transformer malfunctioned, causing a small amount of smoke to rise and settle in the rafters. The employee suffered respiratory illness and was hospitalized.",1
"An employee was making adjustments to a chain conveyor with a come-along when the chain slipped and caught the employee's left hand, amputating the middle fingertip at the nailbed.",0
"On 12/20/16, at approximately 8:15 p.m., an employee was processing wood into trusses on a final press machine when the machine smashed his finger. His finger was medically amputated.",1
"On December 20, 2016, at approximately 8:30 PM, an employee was stopped for a routine inspection. As he was trying to get back in the truck, he fell backwards off the step of the truck and broke his ankle. He was hospitalized and had surgery.",1
An employee was working on a boom cylinder to install a locking pin when the pin came out. The employee's left hand was then pinched between the boom and the support stand. The employee suffered a broken left-hand and laceration.,1
An employee was picking up spilled garbage on the ground when the garbage truck backed up and struck him. He fell to the ground and the truck ran over the tip of his left foot. He suffered bruises to the left leg and foot.,1
"An employee was fixing a lock on a pallet in an airport trailer when he lost his balance and fell backward approximately 5 feet onto the concrete floor. He suffered a head injury and broken neck, requiring hospitalization.",1
"An employee was helping to set up a scaffold when a piece of clay tile/ceiling debris fell from the ceiling and struck the employee's lower back, requiring hospitalization.",1
An employee was walking past a pallet when a 50-pound bag fell and struck the employee's shoulder and heel.,1
"An employee was driving a forklift when his foot was pinched between two forklifts, amputating two left toes.",0
"An employee was transferring small packages of material from a conveyor to a cart when his foot was caught on the corner of a nearby pallet. He tripped and fell to the floor, fracturing his right arm and elbow.",1
An employee was changing the dust collection drum on a CNC router when the dust collection system's airlock amputated his right index finger at the middle phalange. The machine was unguarded at the time of the incident.,1
"An employee was using a hand grinder to fabricate a piece of metal when the disk exploded and lacerated his face, requiring surgery.",1
An employee was using a table saw to cut wood for cabinets when the blade partially amputated the employee's right index finger. The saw was unguarded at the time of the incident.,0
An employee was troubleshooting a UV chamber to see if there were bulbs installed when something in the chamber burst and contacted the employee's face. The employee lost the right eye.,1
"An employee was using a crane to load steel for a furnace. When the employee unhooked the lifting device from the steel, the hook on the chain caught on the steel. Before the employee could stop the crane, the hook, under tension, came free and struck the employee's jaw, fracturing it.",1
An employee was rolling a driveway using a compact roller (equipped with a rollover protective system and canopy) when he drove into a tree limb. His right pinky finger was caught and amputated on the tree limb.,0
"An employee was installing windows from a scaffold when the scaffolding collapsed. The employee then fell approximately 12 feet, suffering broken ribs and fingers.",1
"An employee and a coworker were working at a machine press to bend metal parts. The employee was placing metal pieces while the coworker operated the machine. The coworker cycled the machine while the employee's fingers were still under it, smashing and fracturing them. The employee's fingers later had to be amputated.",0
"An employee on a production line was installing a chassis bumper when the chassis from down the line pinned him between the two chassis, crushing his back.",1
"On Wednesday, December 21, 2016, at approximately 2:30 PM, an employee was operating tube-straightening process equipment when a tube stopped in the process. He placed his left hand on the tube. As he did, the tube began rotating again. The motion caught the employee's left forearm, fracturing it and requiring hospitalization.",1
"An employee was tearing down a side boom. While pulling the slack out of the load line, the employee's right hand was pulled into the guidewheels of the equipment, amputating the ring finger and partially amputating the middle and pinky fingers.",1
"An employee was on the flatbed of a tree transport truck moving hoses. He was grabbing a loose tree bar when he fell backwards off the truck. The tree bar also fell on top of him and struck his abdomen, causing serious internal injuries that required surgery and hospitalization.",1
"An employee was using a hand held grinder with a 5-6 inch blade to grind a granite countertop. The grinder kicked back and the back end of the grinder struck the employee in the mouth. While trying to regain control of the grinder, the grinder blade lacerated his left bicep requiring surgery and hospitalization.",1
"An employee was helping to unload a truck and was moving out of the way of a pallet jack when he fell, fracturing his left hip.",1
"An employee was delivering a package to a residence, slipped on ice in the driveway, and fell fracturing the left hip.",1
"An employee was loading and unloading trucks on a loading dock when he was struck by a reversing forklift, suffering contusions and edema.",1
"During rigging down of a drilling rig, two employees attempted to lift/move an I-beam by hand. The I-beam shifted and crushed one of the employee's right middle finger resulting in amputation of the fingertip/print pad.",0
A temporary employee was mixing dough when he noticed dough stuck on a rod at an adjacent machine. He was attempting to clear out the dough when a moving part pinched and amputated his right ring fingertip between the part and the rod.,0
An employee was placing cardboard into the empty corrugate conveyor. The pick knife the employee was using contacted an exposed area between the plug and the outlet. The employee was shocked and suffered an electrical burn on the wrist.,1
An employee was trying to manually fit a side panel for a livestock trailer when his finger was pinched between the side panel sheets causing a 1 cm amputation of the employee's left middle fingertip.,1
"An employee suffered a severe right hand and arm injury while using a woodworking machine, requiring hospitalization.",1
"An employee was removing gutters and fell 12 feet through a skylight. The employee suffered a skull fracture, fractured vertebrae, a fractured wrist and a fractured pelvis and tailbone.",1
"An employee was walking down an aisle in a warehouse. At the same time, a coworker was operating a forklift in the opposite aisle. The forklift pushed some items, causing them to fall from a shelf and strike the employee. He was hospitalized with a compound fracture to his right leg, six cracked right-side ribs, a fractured pelvis, and three broken vertebrae.",1
An employee was moving around the office on a rolling chair when she fell off the chair and fractured her right hip.,1
"An employee was walking to his car to retrieve work equipment when he fell on ice in the parking lot, fracturing three bones in his back.",1
"An employee slipped and fell to the floor, breaking her kneecap.",1
"An employee was heating a paint spray can with a heat gun when the can blew up, burning his hands, wrists, neck, and face.",1
An employee was roofing when he stepped backwards and his heel struck a skylight cover. He then lost his balance and fell 25 to 30 feet through the acrylic cover to the concrete ground below.,1
An employee was burned while working with refrigerant.,1
"On December 21, 2016, an employee was installing cable on a vehicle lift when an arm of the lift fell on his left hand causing crushing injuries and broken fingers. The employee was hospitalized and required surgeries to the hand.",1
An employee was operating a utility task vehicle (UTV) and drove off a bunker. The UTV fell five feet and rolled over. The employee suffered a broken right leg that required surgery.,1
An employee collapsed while loading the meat case and was hospitalized for a possible heart attack.,1
"While rolling a tank, the tank fell from the platform and the employee fell with it resulting in a lower back strain and hand lacerations.",1
"An employee was coming down a ladder, slipped, and fell fracturing an ankle.",1
"An associate was at the register when another associate came to take something out of the drawer. He stepped back and hit the drawer that had been opened, causing a chain reaction. He stumbled and bumped into the associate who had opened the drawer and then she stumbled and fell into the injured employee, causing her to fall onto the floor fracturing the right hip.",1
An employee was hospitalized after falling from a roof on 12/22/2016.,1
An employee was retrieving a box of clothing from the mezzanine above the maintenance area when she stumbled and fell down the last 3-4 stairs of the wooden stairway. The employee's left ankle was broken in two places.,1
"An employee was sweeping the floor with a broom, lost her balance, and fell fracturing the left hip.",1
An employee slipped on ice in the parking lot and fell fracturing a knee cap.,1
An employee fell from a step ladder resulting in fractured ribs and an ear laceration.,1
"On December 22, 2016, at approximately 6:25 a.m., an employee was making adjustments to the GN machine 3030-7 contact heater when his hand slipped down into the cutting knife resulting in the amputation of the right index finger at the first knuckle.",0
"On December 22, 2016, at approximately 7:30 AM, the employee was lubricating a moving conveyor when her finger got caught in the conveyor resulting in a partial amputation.",1
"While loading a ham cart onto a truck, the cart fell off the lift gate and struck the employee resulting in a broken leg.",1
An employee slipped and fell on an icy sidewalk while delivering mail resulting in a knee fracture.,1
A temporary employee was operating a forklift while carrying a nylon sling outside of the cab. The sling got caught under the rear tire of the forklift resulting in a left arm amputation.,0
An employee was cutting a pipe using a clamshell pipe cutter and amputated the left index finger.,1
An employee was unloading paper products from a cargo ship. The employee's finger was crushed between two rolls of paper resulting in an amputation injury.,1
An employee slipped on loose cardboard and plastic and fell in the driveway of a customer's residence during delivery. The employee suffered a hip fracture.,1
An employee was operating a table saw and cut his right index finger resulting in amputation of the finger at the knuckle.,0
An employee was performing maintenance work using a grinder when their left thumb contacted the grinding wheel resulting in an amputation injury.,0
An employee's left arm was caught in the printing press resulting in tearing of the skin that required surgery and hospitalization.,1
"An employee was standing on top of a mechanical power press. When the machine cycled, the employee's foot was caught in the press resulting in an injury that required 17 stitches.",1
An employee was loading/unloading steel I beams when a steel I beam slipped off the crane hook and amputated two of the employee's toes.,1
An employee was retrieving a knife that had fallen into a hopper. The machine was turned on while the employee's hand was in the screw auger area and two fingers were amputated.,1
"An employee was cleaning out a gate valve while on a scissor lift about 15 feet in the air. As the employee opened the inspection door on the valve, hot ash dislodged and landed on the lift's control panel. The hot ash on the control panel made it impossible to lower the lift. The employee manually lowered himself from the lift and fell on his back.",1
An employee was standing on his flatbed trailer unstrapping an outrigger when it shifted and fell on him. The employee was knocked to the ground and the outrigger (600 lbs. of steel) fell on him resulting in a laceration to the right wrist and a puncture wound to the right leg.,1
An employee was onsite water-well drilling and was caught between the drill stem and the truck resulting in a fractured left arm requiring surgery and hospitalization.,1
An employee was working on forms for a concrete pour and fell seven feet to the deck below fracturing their pelvis and shoulder. The employee was not tied off at the time of the incident.,1
"An employee was trimming a tree branch. While the tree branch was being re-positioned, the branch kicked back and struck the employee in the leg resulting in a leg fracture.",1
"On December 22, 2016, at 11:00 a.m. an employee was manually moving a snow plow blade on a parked forklift and caught his finger under the blade and between a fork on the forklift resulting in a left middle fingertip amputation.",0
An employee slipped on ice and fell in the parking lot resulting in three fractures to the lower right leg and ankle.,1
A temporary employee was operating a stone splitter and amputated a finger at the first joint.,1
An employee was removing fasteners from an MDF board on a shelving display while standing on a four foot step ladder. A piece of MDF board struck the employee and the employee fell sustaining a broken pelvis and a right shoulder contusion.,1
"On December 22, 2016, at 11:30 am, an employee was bagging product and suffered a left index finger amputation.",0
"On December 22, 2016, an employee injured his right forearm when a piece of glass he was carrying broke. The employee was hospitalized and needed surgery to repair the laceration.",1
An employee was operating a mechanical hydraulic press and cut the tip of his left hand middle finger at the point of operation. The tip was surgically amputated the following day.,0
An employee was cleaning up a hazmat spill when some of the dust got under his mask burning his mouth and throat.,1
An employee suffered a ruptured/fractured vertebrae while assisting a patient.,1
Two employees were repairing a sofa. The injured employee's finger got caught between the springs and when the second employee pulled the springs the injured employee's left middle fingertip was amputated.,0
An employee was manually bending sheet metal and suffered a heart attack. The employee was hospitalized.,1
An employee was delivering mail and fell fracturing a hip that required surgery and hospitalization.,1
"An employee was descending a stepladder, missed the last step, and fell resulting in a broken wrist.",1
"An employee was walking in the aisle, turned a corner and was struck by an electronic shopping cart driven by a customer. The employee sustained a broken hip.",1
"While working around a cardboard baler, an employee tripped over plastic that was wrapped around a pallet prepared for the baler and fell fracturing the pelvic bone.",1
"An employee was operating a powered pallet jack, turned a corner and lost control of the pallet jack. The employee sustained bruising after being pinned between the pallet jack and the warehouse rack.",1
An employee was on a horse and a cow/steer got under the horse causing the employee to fall onto and then over a fence.  The employee's left humerus was fractured.,1
"On December 23, 2016, an employee slipped and fell in the parking lot fracturing a hip that required surgery and hospitalization.",1
An employee was carrying a case of product from a trailer into the store and stepped into a gap near a scissor lift causing the right foot to roll fracturing the ankle.,1
An employee's right arm was amputated while he was operating an edge grinder machine.,0
An employee slipped on black ice and fell while walking on the sidewalk fracturing her lower leg while performing parking attendant duties.,1
"On December 23, 2016, an employee was walking from the break room to a material handler when he stepped on a nail that punctured his shoe. The employee was admitted to the hospital.",1
An employee climbed boxes to retrieve orders and fell 5 to 6 feet resulting in a broken leg.,1
An employee was injured while advancing a pallet of hollow core doors on a conveyor to the door unit assembly machine. The employee's foot slipped between conveyor rollers causing an ankle injury.,1
An employee was operating a router and crushed three fingers in the machine. The employee was hospitalized for surgery.,1
"On November 30, 2016, an employee was working on the magna vc line and received a crushing injury when a finger was pinched between the slide and the part that was being repaired. On December 23, 2016, the right index finger was amputated.",0
An employee was making adjustments to a machine when the roller mechanism came down and struck his thumb fracturing it.,1
An employee was operating a forklift and collided with another forklift traveling in the same direction resulting in amputation of a toe on the right foot.,0
An employee was using a pallet jack to select product and pinned his hand between the jack handle and the rack. Surgery was performed on the employee's left pinky finger to repair a cut tendon.,1
An employee was drilling a water well when their left arm was caught between the truck and drill stem and fractured.,1
An employee was painting a house. The employee exited the scaffolding onto the roof and then fell approximately 12 feet. The employee sustained a fractured L1 vertebra and left arm.,1
"An employee was setting culverts along a highway. After a culvert was in place, the employee slipped on the embankment. The employee grabbed the rim of the culvert to catch his fall and lacerated three fingers on the left hand.",1
An employee was troubleshooting a hydraulic power press and suffered the amputation of the right and left middle fingers above the first knuckle.,0
A temporary employee was operating a forklift and crushed their foot between a pole and the forklift.,1
The employee was walking into work from the parking lot when a customer was driving their vehicle away from pump #9 and the hood of their vehicle struck the employee. The employee suffered a broken leg and torso injuries.,1
An employee was performing maintenance on a pasteurizer when the CIP mechanism initiated causing first and second degree burns to the employee's arms and side.,1
"An employee was walking to her car in the parking lot, tripped over a concrete parking block and fell breaking the right arm.",1
"Shortly after midnight, two suspects attempted to gain access into the store. The suspects tried the front door and drive through, but those access points were locked. The suspects fired through the glass into the store striking an employee in the back under the arm. The employee was hospitalized.",1
"An employee was checking on an alarm, tripped on steps to the pharmacy door, and fell breaking his leg in two places.",1
An employee was making rounds when the employee walked into a sulfuric acid spray that was coming from a pin hole leak from a V-1038's sludge trap. The employee sustained second and third degree burns to the neck and face.,1
"While performing avalanche hazard reduction, an employee fell and tumbled in steep terrain. The employee sustained a fractured right knee, left shoulder and a rib.",1
"On 12/25/16 at approximately 11:30 AM, an employee sustained first degree burns to the forearms and right hand while troubleshooting an energized pneumatic document tube system's panelboard.",1
An employee was clearing a plug in a rotary feeder at the base of the bag filter and amputated four fingers on the left hand.,0
"While rewiring equipment on top of a larger cooler, an employee walked from one cooler to another and tripped, falling forward, then off the cooler and onto the ground approximately 8 feet below. The employee sustained facial lacerations and three herniated discs in the neck.",1
"On 12/26/16, an employee was bending rebar with a machine. The employee sustained a hand injury requiring hospitalization.",1
An employee was removing a tree from a downed power line. The tree struck the employee in the head causing a skull fracture.,1
An employee was slicing a tomato using the meat/cheese slicer and amputated the right index fingertip.,0
"An employee was moving a piece of iron on the bed of an iron truck, when he lost his balance, slipped, and caught his finger between the piece of iron he was handling and part of the iron flatbed truck. The left middle fingertip was amputated.",1
An employee was working on a baker scaffold 5 to 6 feet high when he fell off of the scaffolding and broke a leg and cheek bone.,1
"On December 26, 2016, an employee was hospitalized for surgery on his dislocated left foot when he was stuck by a customer vehicle in the parking lot.",1
"On December 26, 2016, two employees were moving a 90 inch metal reel using a forklift and a 4 X 4 wooden block. The reel spun and pinned the injured employee between the reel and the support beam resulting in a fractured rib and vertebrae and a collapsed lung.",1
An employee was delivering food to a residence and was robbed at gun point by an unknown person. The employee suffered two gunshot wounds to the face and head.,1
An employee caught a falling diamond shape glass placard with her hand and suffered a deep laceration on her hand caused by the edges of the placard. The employee was hospitalized.,1
An employee was struck by a PIT resulting in broken bones.,1
An employee was cleaning radishes. The employee slipped on the wet platform floor and fell three feet striking a pipe. The employee sustained an injury to the right side of the chest that may require surgery.,1
An employee was sweeping outside in front of the hotel when the rotating door struck the employee's shoulder causing the employee to fall and break the left wrist.,1
An employee was loading an empty coil tubing reel onto a trailer using a crane. The reel fell off the trailer and struck the employee breaking the tibia and fibula.,1
"A patient became aggressive and physically struck an employee multiple times. The employee suffered multiple bruises, a bloody nose, and a bruised kidney.",1
An employee was dumping scrap granite using a forklift. The employee placed his hand on the forks while pulling the lever to dump the bucket. The employee's left pinky finger was caught between the bucket and the fork resulting in amputation.,0
An employee was cleaning inside a manhole when he was hit by a car. He suffered a broken left shoulder.,1
"An employee was feeding rebar into a radius machine when his glove became caught on the guard. His right hand was then pulled into the point of operation, crushing and breaking it.",1
An employee was disassembling a press machine. The gear under the press shifted and the screw driver the employee was using went through his right hand.,1
An employee was preparing to move a 55-gallon oil drum when he suffered an abdominal hernia.,1
"An employee was moving a metal egg buggy when his right foot was caught between the buggy and another buggy. As he tried to remove his foot, the tendon in his right heel was cut and required surgery.",1
An employee was operating a gate cutter when his left middle and ring fingers became crushed/pinched between the gate and the gate cutter.,1
An employee was taking equipment out to a storage corral when she slipped on ice and broke her ankle.,1
"An employee's left thumb was partially amputated when it got caught between a beam and the hook of the overhead crane used to lift the beam.
",0
"An employee was using a table saw to rip small pieces of 2x4 for a form when his left index finger contacted the running blade, amputating the first knuckle. The saw was guarded at the time of the incident.",1
"An employee slipped on ice outside the front of the building while walking into work, fracturing a leg and requiring hospitalization.",1
An employee was operating a tube winder and amputated three fingers on the left hand.,1
An employee was walking from the tractor to his truck to get a wrench when he slipped on ice and fell hitting his head on the ground.,1
An employee was shutting down an air handler and using a screwdriver to slow the belt down when his left fourth fingertip was caught and amputated in the belt.,1
"An employee was walking down a set of stairs and fell, striking his face on a pipe on the landing. The employee was hospitalized with broken bones in the face and head.",1
"An employee was walking alongside a forklift moving decking. He was wearing a harness because he would eventually have to go up to an elevated position. The lanyard from the harness became caught on a pipe, causing the employee to fall, which then caused the load to shift. Decking sheets then pinned the employee's left hand between a column and the sheets, injuring his ring finger.",1
"An employee was removing a thermometer from a thermal well when hot liquid from the thermal well leaked out and sprayed the employee, causing thermal burns.",1
"On December 27, 2016, at approximately 10:50 p.m., an employee was changing the shackles on an evisceration line when his right thumb was amputated by the line. The shackle line was not turned off at the time of the incident.",0
"An employee was setting up tools on a CNC machine. He had commanded a tool change when he noticed the coolant line was in the path of the tool changer. When he attempted to move the coolant line, the tool changer went into motion. His right index fingertip was then amputated between the tool and the changer (no bone loss).",0
An employee was cleaning up water that had leaked from the dishwasher. She slipped and fell breaking her knee cap.,1
A temporary employee was cleaning the mixer with salt and fell into the mixer. The mixer actuated and the employee was injured.,1
"An employee was loading soil into a truck when he noticed debris on top of the truck that was hindering the tarp from covering the load. He climbed a fixed ladder and was clearing the debris when he fell 10 feet to the ground below, fracturing his vertebrae.",1
An employee was hospitalized due to slip and fall conditions. ,1
"An employee was laying metal decking and fell approximately 15 feet. The employee suffered a fractured left hip and fractures to both arms, the jaw and cheekbones.",1
"An employee had just finished lifting a shale bin using two loaders (one with a stinger, chain, and lifting equipment) in order to place matting underneath. Once the matting was in place, the employee directed the loader to lower the bin until there was enough slack in the lifting chain to remove it. As the employee grabbed the eye of the lifting chain to unhook it, the operator of the loader bumped the controls with his knee, causing the chain to tighten and pinch the employee's right middle finger between the bin and the chain. The employee's right middle finger was amputated between the middle and upper joint, and the employee was hospitalized.",1
An employee was working at his station when his right foot was run over by a forklift in reverse. He was hospitalized with a broken right foot.,1
"An employee locked a machine out, opened the panel door, and was reattaching a wire nut onto a conduit when his hand touched a live wire. He was shocked and suffered a burn on his hand, requiring hospitalization. Although the machine was de-energized at the time of the incident, power was still coming into it through a box at the top of the machine.",1
An employee was taking the trash out to the dumpster when he fell approximately 4 feet off the dock and broke both his legs.,1
"An employee sustained an arc flash burn while performing electrical work on equipment, requiring hospitalization.",1
An employee was using a handheld skill saw when the employee's glove was caught in the blade. The employee's left ring finger was then amputated up to the first knuckle.,0
"An employee was feeding film into a wrapping machine when her hand contacted the machine, amputating approximately three-quarters of three left-hand fingers. The machine was guarded at the time of the incident.",1
An employee suffered a right-hand middle finger amputation while cleaning a lint filter.,0
An employee slipped and fell on a patch of ice in the parking lot.,1
An employee was moving a pressure washer from one section of scaffolding to another section when the weight of the pressure washer on the end of the scaffold caused it to tip over. The employee fell to the ground and fractured his vertebrae.,1
An employee on a ladder fell while reaching for his lanyard attachment.,1
"After working with pre-cast concrete parts, an employee felt sick and then fell. The employee struck their head and required hospitalization.",1
An employee was standing up from a bench when something snapped in her right ankle.,1
"An employee slipped while climbing down from equipment. The ring on his ring finger was then caught on the equipment, causing an avulsion.",1
"An employee was testing de-energized conductors at a solar farm construction site when an arc flash/fire occurred, burning the employee's hands, face, and neck. The employee was hospitalized.",1
"An employee had installed a valve stem extension on a tractor trailer rig and was crossing the roadway when he was struck by a truck that was leaving the area, fracturing both legs/ankles and requiring hospitalization.",1
An employee's left ring fingertip was caught between the cylinder and motor as he was performing maintenance on a compressor.,1
An employee was getting ready to hook up to the dome while using the vault cart. The employee's left thumb was caught in the vault cart winch and the end of his thumb was amputated.,0
An employee was unloading a shipping container using a hand truck. The hand truck fell with the load on it and struck/crushed the employee's foot causing a fracture that required surgery and hospitalization.,1
An employee was breaking down boxes and cut her upper leg with the box cutter tool.,1
An employee was wearing an N-95 dust mask and mopping the floor at the end of her work shift when she experienced shortness of breath due to breathing in tezacaftor (chemical compound). The employee was hospitalized.,1
An employee was helping another employee lower a walk-behind pallet jack that had been stood up on it's back end. The employee's right hand had a hold of the forks and his right index finger got stuck in the wheel well as it was lowered to the ground. The finger was smashed and the tip was amputated at the hospital.,1
"An employee was cutting a block on a table saw when the blade cut his finger, requiring hospitalization.",1
An employee was performing duties as a derrick hand at an oil/gas production site when his right index fingertip was pinched and amputated between a pipe and a latch.,0
"An employee was descending a 14-foot fixed ladder when she fell approximately 12 feet to the concrete floor, fracturing her right femur.",1
"An employee was installing decking and transferring from a static fall protection line. The employee disconnected from one anchor and was trying to reattach to another when the employee fell 15 feet to the ground, suffering a broken wrist and requiring hospitalization.",1
"An employee was adjusting a press machine when the ram fell and crushed her right ring finger, amputating it at the knuckle.",1
"An employee was walking alongside a Bobcat when he tried to mount the vehicle for a ride. The vehicle then ran over him, breaking his leg.",1
A rural mail carrier had an accident when she ran into a tree while driving down the driveway of a residence after delivering a package. The employee was reported as having a seizure that caused the accident. The employee was hospitalized with a fractured jaw with loss of teeth and a fractured right collar bone.,1
"An employee was a passenger in an open cab, flatbed utility cart (golf cart type) that was transporting a load. She was ejected when the driver made a sharp turn, striking her head on the pavement. She suffered a fractured skull and was hospitalized.",1
An employee was attempting to give medication to a patient when the patient became agitated and bit the employee's left thumb. The employee was hospitalized.,1
"On December 29, 2016, an employee was a clearing a jam on the in-feed conveyor of a double-end foiler machine when the employee's right ring finger was pinched and lacerated in a pinch point between the feedstock material and the framework of the conveyor's emergency stop paddle. The employee was hospitalized.",1
"An employee was walking from a mushroom house when he slipped on a small patch of black ice and fell on his right leg, fracturing his right tibia/fibula.",1
"An employee was climbing a wet built-in ladder on a vehicle that had been brought in from the rain when he slipped and fell approximately 6 feet to the ground, breaking his right elbow.",1
"An employee was operating a mule-type all terrain vehicle to travel from one area of the plant to another when he was struck by the forks of a forklift being operated by a coworker, fracturing his left tibia and fibula.",1
An employee was backing up from a cardboard baler when she tripped on the forks of a manual pallet jack and suffered multiple fractures.,1
"While walking from the west parking lot into the building, an employee walked in front of a stationary truck that was waiting to proceed to a scale. When the employee was in front of the truck, it began to move and struck the employee with the front bumper. The employee was pulled under the truck and suffered numerous cuts and a laceration to the right thigh.",1
"An employee slipped and fell while mopping, breaking her hip.",1
"An employee was using a meat saw when his hand slipped and his right middle finger engaged with the blade, lacerating his fingernail and fingertip.",0
"An employee was blending solvents (dichloroacetic acid and toluene) in a 100-liter glass vessel when it cracked, splashing solvent on the employee's left shoulder, chest, and back.",1
"On December 29, 2016, at approximately 11:30 a.m., a crew was moving skids out of the bottom of a large excavation. The skids had been placed in an excavator's hoe bucket on the ground. An employee was unloading the skids from the bucket and handing them to the injured employee, who was positioned next to the track hoe bucket and a super sack of sandbags. At this time, another employee walked by the hoe operator and asked him to take over the track hoe. As he twisted around to speak, his safety vest caught the operating lever and caused the bucket of the track hoe to move and pinch the injured employee's left ankle between the hoe bucket and super sand bag. His lower left leg was fractured just above the ankle.",1
"An employee was unloading a truck using an electric pallet jack. As he was exiting the truck, the dock plate malfunctioned and pinned the employee's foot against the electric pallet jack causing lacerations and fractures to several bones in his right foot.",1
"An employee was operating an LPM machine to seal small mustard packages. A mustard package jammed up the LPN machine and when the employee tried to pull the mustard package out, part of her left index finger was removed. The machine was guarded at the time.",0
"An employee was using the scanner, tripped over the scanner cord and fell fracturing a hip.",1
An employee's gloved hand was caught between the moving rollers while removing strings from the powered conveyor resulting in the amputation of his right finger above the first knuckle.,0
"An employee was checking a cyclone machine when he opened the spy door and fire shot out, burning his forehead, cheek, and chin.",1
"An employee was using a hand grinder when he saw something wrong with the guard.  When he attempted to adjust the guard, the grinder caught his gloved hand and amputated his left index finger. The grinder was still in operation at the time of the incident.",0
"An employee was obtaining a storm water sample when the storm water grate fell and pinched the employee's finger, amputating the fingertip.",0
An employee tripped and fell over a large piece of concrete in the parking lot. The employee sustained a broken kneecap and required surgery.,1
"An employee was operating a bus when he crashed into an 8-foot fence, suffering lacerations and a fractured left shoulder.",1
An employee was grinding parts on a pedestal belt grinder and suffered a left thumb amputation.,0
An employee was moving a ladder and caught their right index finger in the hinge resulting in a fingertip amputation.,0
"The employee was making parts at the Accupress machine and stacking them on a skid that was on a cart. The employee went to adjust the materials when the skid and parts fell on him, causing him to fall backwards with the material landing on his stomach and legs and his head striking machinery behind him. The employee was hospitalized for a fractured left kneecap and leg, a fractured right ankle and multiple lacerations to his legs, stomach and head.",1
"An employee was performing sanitation duties on a machine. The employee removed piping to clean a valve inside. The air source to the machine was not locked out. While cleaning the valve, it actuated and caught her finger. She was hospitalized and the finger may be amputated.",1
"On December 30, 2016, at 5:45 am an employee slipped on black ice in the back parking lot and fell while using a flashlight on his way to the jockey truck to move a loaded trailer. The employee fractured the lower left leg that required surgery and hospitalization.",1
"An employee was walking into the plant, slipped on ice in the parking lot and fell suffering an ankle injury that required surgery and hospitalization.",1
"An employee was walking into work from the parking lot, slipped on black ice and fell fracturing the pelvis and a wrist.",1
An employee was adjusting the cable on the electric hoist when his left index finger got caught up in the hoist cable and the fingertip was amputated.,0
"On December 30, 2016, an employee was burned on the face, arm and left hand while cleaning a jiffy mixer in a solvent tank when the solvent vapor ignited.",1
"An employee was sprayed with hot product causing third degree burns to his neck, upper torso and legs. He also sustained a dislocated right shoulder in the incident.  The employee was admitted to the burn unit for treatment.",1
"An employee was unhooking a trailer from the truck and was pulling the 5th wheel pin to drop the trailer. The trailer was on a slight incline and when he pulled the pin, the trailer slid and dropped catching his right hand and causing lacerations.",1
An employee was cutting top sirloin on a meat saw and amputated the right index finger.,0
An employee was lowering the frame of the bread rounder back into place on the conveyor and pinched their right thumb resulting in amputation of the thumb.,0
An employee was helping two other employees push a winder back into starting position. One employee's hand was caught in a nip point and the left index fingertip was amputated.,1
An employee fell down the stairs while carrying a box from the stock room.,1
Employees were using a rough terrain forklift truck to pivot a fork of another rough terrain forklift truck. The fork was tied to its carriage. When the fork was untied it came down and struck an employee standing near the truck and broke his leg near his ankle.,1
"An employee was blasting angles inside the cargo tank on the upper level of a scaffold. A 6-inch pipe approximately 24 inches above the scaffold deck was running horizontally behind him. During the process, he stepped backwards, lost his balance and fell backwards over the pipe as pressure remained on the hose. His legs went in the air during the fall the blaster blasted his right leg below the knee. The employee suffered a deep laceration and injection injury to his lower right leg.",1
"An employee was at the nurse's desk, turned, and fell to the tile floor fracturing the left hip.",1
An employee was dismounting a center riding pallet jack and fell breaking a leg.,1
"An employee was delivering mail in a residential neighborhood. While walking down a driveway, she stepped on an unstable object and twisted her ankle.",1
An employee was using an air impact wrench to tighten lug nuts on the vehicle he was servicing. His glove got caught on the rotating spindle as he was tightening the lug nuts on the vehicle and the employee suffered an open fracture and amputation of his left little fingertip.,0
An employee suffered a back injury (slipped discs) while reaching into the back of the LLV to retrieve a parcel for delivery.,1
An employee's finger was amputated while closing the safe door.,1
An employee was working on a platform 2.5 feet above ground power washing equipment. He fell backwards off the platform breaking his radius and ulna.,1
An employee slipped on ice near the car washing area and fell. The employee suffered a broken hip requiring surgery.,1
An employee was re-attaching the dump arm to the main frame of a cane trailer. The employee's right index finger was crushed in a pinch point causing an open fracture.,1
An employee caught and injured their right middle finger inside a door jam.,1
An employee was using a table saw to cut shims at the jobsite when a board kicked back amputating his right index finger. The saw was unguarded at the time.,1
An employee was cutting the aitch bone out of a hog carcass when the boning knife slipped and lacerated/punctured his top right rib area.,1
An employee struck a concrete bollard while following another employee on a stand up forklift resulting in amputation of the left leg.,1
"An employee was collecting shopping carts in the parking lot when he was struck by a moving automobile, suffering multiple injuries and requiring hospitalization.",1
An employee was standing on the edge of a containment wall while changing a pump when he slipped and fell 1.5 feet from the wall and fractured his left forearm.,1
Employees were pulling poly pipe when a piece of poly pipe struck an employee's lower left leg and fractured it.,1
"An employee was performing set-up for production. When he picked up the pipe to a vacuum-type motor to connect to the fecal flush pump, he received an electrical shock on both hands. The fecal flush pump was not operating at the time of injury.",1
An employee was walking through the store parking lot and was struck by a car. The employee suffered a broken leg.,1
"On January 03, 2017, an employee was closing a trailer door when their fingers were caught in the door and the left middle finger was amputated.",0
The plant was shut down for maintenance including the 440 V lines. The 110 V line was left energized. Three employees were moving the rectifier equipment back into place when one of the employees touched something and felt hot like he was shocked. It ran through both arms. An EKG showed changes in his heart rate and he was hospitalized.,1
An employee was loading skylight panels onto a trailer when the employee's right pinky fingertip was caught and amputated between the panels and the trailer.,0
An employee fell on icy ground outside and broke her left hip.,1
"On January 3, 2017, an employee fell from an A-frame ladder while attempting to change the ballast in an overhead light fixture, suffering heel fractures to both feet.",1
"An employee was walking, tripped over metal parts and fell breaking an ankle.",1
An employee was removing passenger bags from a conveyor belt while a string of four dollies was carrying empty LD3 containers from a flight. The last dolly clipped a curb and an LD3 bounced off the dolly and struck the employee. The employee suffered a fractured left tibia and a head contusion.,1
"Two employees were moving sheets of plywood on the dock. At the same time, a poultry pan was being lowered onto the dock. The injured employee moved under the pan as it was being lowered and was struck by the pan. The employee suffered a broken hip and right metacarpal and a hematoma on the forehead.",1
An employee was hospitalized when he fell from a step ladder fracturing a shoulder and a rib.,1
"An employee was using a powered pallet jack (ride on the back style) to pick up orders. The injured employee was walking in front of the PIT, looking backwards, and ran into a stationary stack of materials. The employee operating the PIT was unable to stop the PIT before it struck the injured employee pinning him between the PIT and the stationary materials and breaking the employee's left leg.",1
"An employee was wearing stilts to place ceiling grid when he tripped on a metal stud and fell, breaking both wrists.",1
"An employee was picking up cones and warning signs in a road construction area when he was struck by a runaway car, requiring hospitalization.",1
An employee was moving a folding table and fell fracturing two vertebrae.,1
"An employee was dismounting a boom truck when his leg was caught in the outrigger, breaking it.",1
"An employee on a loading dock was walking away from a pallet truck he was handling when he fell 4 feet off the dock to the lower level, fracturing his T4 vertebra.",1
An employee was working on a core baker machine when his leg was caught between a moving part and a stationary part. He suffered a broken lower right leg and was hospitalized.,1
"An employee was using a circular saw to rip a plywood counter top brace when the saw bound up and kicked back, partially amputating the employee's thumb.",0
An employee was working on a wooden crate and using a pneumatic nail gun when a nail penetrated his right eye.,1
"Two employees were performing preventive maintenance on an elevator table device used for stacking and palletizing totes. One employee was adjusting a braking mechanism/motor while the other was below the table. The braking mechanism was accidentally released, causing the table to fall on the second employee and pinning him below. He suffered a fractured pelvis.",1
"An employee's left index finger was pinched by a plow on a draw bench, requiring medical amputation.",1
An employee suffered a hernia while pulling a 50 pound piece of beef off of the conveyor table. The employee was hospitalized for surgery.,1
"An employee attached a full drum to a drum hoist for transport. The full metal drum slipped from the drum hoist during transport and struck the employee's left shin, severely cutting it and requiring hospitalization.",1
While moving equipment (a concrete testing machine) from one building to another via forklift the load became unstable and began to tip off of the forks. An employee attempted to grab the equipment to keep it from falling and his hand was caught between the equipment and a doorframe. He suffered lacerations to his hand and a fracture resulting in hospitalization.,1
"An employee was removing the safety barricade in front of a cap on a 24-inch PVC pipe after pressure testing when the cap became over-pressurized and blew off the pipe, striking him and knocking him against the wall and to the ground. He suffered a fracture to the left side of his skull near the ear and a sprained right knee.",1
"An employee was salting an icy area when he slipped and fell forward, hitting his forehead on the asphalt. He fractured his skull and suffered a brain hemorrhage.",1
An employee was using a cheese cutter when the blade amputated his finger.,0
"While operating a tow bar, an employee's right thumb was crushed between two metals.",1
"An employee was arranging jewelry in an opened drawer when she bumped into it. She lost her balance and fell on the ground, breaking bones and injuring her leg. She was hospitalized and had surgery.",1
"An employee was walking down a hallway when the rubber tip of her shoe was caught, causing her to fall forward on her left side. She suffered a compound fracture of the upper humerus and required surgery.",1
"A guard was hit in the head, neck and chest by a combative patient in the emergency room.",1
"An employee was getting out of his truck when he slipped on ice/snow, fell to the ground, and broke his left fibula.",1
"An employee was replenishing the warehouse storage racks when he fell 8 feet off of a platform to the ground below, fracturing his wrists.",1
An employee was moving a catwalk (a long piece of equipment that helps move tube) against a rig to perform an inspection when his right ring finger was caught and fractured between the catwalk skate and a pin. He was hospitalized.,1
"An employee was moving a cart of zinc bars/ingots to a reclaim furnace to be melted down. The cart wheels were caught in pit holes on the floor, causing the cart to tip over and the bars of ingots to fall on his left leg. He suffered a compound fracture and was hospitalized.",1
"On January 4, 2017, an employee was replacing a paper roll on a mill polisher machine when his left thumb was caught in a pinch point on the machine. His left thumb tip was surgically amputated.",1
An employee lost her balance while in the office. She fell onto her left arm and suffered a fracture.,1
An employee was inspecting a roof when he fell to the ground and lost consciousness.,1
An employee was using a pallet machine and was trying to clear a nail that was jammed in a nail bowl when the nailer came down and amputated the employee's left pinky fingertip. The machine was not locked/tagged out at the time.,0
"An employee was using a chainsaw to cut trees for maintenance purposes when the saw kicked back and landed on the employee's left foot, lacerating it and amputating a toe.",1
"An employee was scanning vehicles on a rail car and was descending a ladder when he lost his balance and fell approximately 12 to 14 feet to the concrete surface below. He broke his left hand, left wrist, left hip, and two ribs.",1
"An employee was processing scopes in endoscopy. The cycle on the Steris machine finished and all safety checks and indicators completed and passed. The employee opened the lid to remove the scope and noticed some fumes (peracetic acid) coming from the machine. The employee had a burning sensation in the throat and lungs. Other employees assisted the employee out of the room into fresh air. The employee took a break and returned to work, but was having difficulty breathing. She was admitted to the hospital for treatment.",1
An employee was MIG welding the dog house of a self-contained compactor when a spark ignited and his shirt caught on fire. He sustained first and second degree burns to his upper torso and third degree burns to his back.,1
"An employee was checking a vehicle and had his left hand in the motor belt when a coworker started the vehicle. The motor belt then moved and amputated his left middle, ring, and pinky fingers.",0
"An employee was on a roof and getting a new battery for his drill when he fell through a fiberglass skylight and injured his right elbow, requiring surgery.",1
"An employee was cleaning a piece of equipment when his hand contacted a knife that was behind the equipment, lacerating his right thumb. He had surgery and was hospitalized overnight.",1
An employee was cutting cardboard that was on top of a pallet with a utility knife when the knife slipped and partially amputated his left thumb tip.,0
"An employee was moving a spare engine when the engine was lowered onto the employee's foot, crushing it.",1
"An employee slipped and fell on ice while walking to a truck, fracturing his right leg.",1
"An employee was tracing piping when the employee's pant pocket became caught on a hot water valve clamp. The valve then released hot water onto the employee's right arm and torso, requiring hospitalization.",1
An employee was assisting in a dowel drilling operation and attempting to steady the drill when his glove was caught in the drill bit. His left fourth fingertip was then amputated by the drill bit.,0
An employee was threading bale wire through a paper scrap baler when the baler was activated. The employee's index fingertip was amputated.,0
An employee was stocking shelves and loading a baler with empty cardboard boxes. She was pulling a rope attached to the baler door to close it when her left pinky fingertip was caught and amputated in the door.,0
An employee was using hydraulic controls to lower an iron roughneck when his right pinky finger and knuckle were caught and fractured between the iron roughneck and the hydraulic cat head.,1
"An employee was filing quality documentation records in file boxes stored on metal shelves, which are about 10 feet high. She was later found unconscious on the concrete floor to the side of the metal shelving unit, which had fallen on the floor. She was hospitalized with a head injury and fractured skull.",1
An employee was walking on steel shelving approximately one foot high. The employee slipped and fell resulting in a chest contusion.,1
An employee was changing an electrical pole when he fell approximately 10 feet to the ground and fractured his right wrist.,1
"An employee was working on the rig floor of a workover rig. The crew was picking up pipe from the hole. The operator descended the block to the rig floor to connect to the pipe. The bails and elevators were connected to the blocks. When the elevators came down, the employee's finger was caught between the elevator and bail resulting in a left middle finger amputation at the first digit.",0
An employee was climbing a tree to cut off the limbs and underbrush when the tree roots came up and the tree fell into the lake. The employee also fell about 40 to 50 feet into the lake while still attached to the tree with safety equipment. He broke both legs and his pelvis.,1
"An employee was handing down a sewer connection fitting to an employee below in a trench when a bolt on the fitting snagged on the employee's jacket, causing him to lose his balance and fall. He fell on the fitting, breaking two left ribs and bruising his left lung.",1
"A crane was lowering a steel beam when the beam dropped unexpectedly and struck an employee. The employee suffered broken fingers, a hand laceration, and back pain.",1
An employee was using a pry bar to loosen debris on a machine when the pry bar slipped and broke his arm. The machine was not locked/tagged out at the time.,1
"An employee was moving a signal arm at a toll booth gate when a nylon sling failed, causing the arm to swing down and strike the employee's chest. He fell to the ground and struck his head.",1
"An employee slid and fell on wet concrete while walking into the building from the company parking lot, breaking the left ankle and requiring hospitalization.",1
"An employee was walking down the hall, lost her balance, and fell breaking her humerus.",1
"An employee was herding cattle while on horseback when the horse slipped on ice and fell, landing on and breaking the employee's leg.",1
"An employee was using a punch press to put holes in a 12-inch post. As he placed the post in the press, the press activated, crushing his right hand.",1
"An employee was changing a battery in a company vehicle. When he lifted the battery, he injured his lower back and required hospitalization.",1
"An employee was climbing on a baker's scaffold to reach a working platform when the scaffold turned over on top him. He fell approximately 6 to 8 feet to the ground, puncturing his lung and requiring hospitalization.",1
An employee suffered an allergic reaction to latex gloves.,1
"On January 5, 2016, an employee was exiting his vehicle when he slipped and fell on the snow/ice, injuring his hip/back and requiring hospitalization.",1
An employee was lifting an aluminum panel (a hutch compartment) when he suffered a herniated disc in his lower back. He was hospitalized.,1
"An employee slipped on ice and fell to the ground while walking in the parking lot, breaking a leg.",1
"An employee was assisting a truck driver with a load when he slipped and fell to the ground, breaking his shoulder and requiring hospitalization.",1
"An employee was operating a standup forklift. When he exited the equipment, he was pinned between the dock door and the forklift, fracturing his left ankle.",1
"An employee was burning trash with gasoline when he was severely burned on the hands and face, requiring hospitalization.",1
"An employee was pulling poly film off a roll when the poly film gave way and the employee fell backward to the concrete floor, suffering a fractured hip.",1
"An employee was trying to grab a small piece a wood that was being cut with a circular saw when his left hand contacted the blade, lacerating his index finger.",1
"An employee was being trained on a forklift and traveling around a charging station when he hit a parked lift and became pinned between the two vehicles, breaking his leg and requiring hospitalization.",1
An employee suffered a finger amputation while operating a saw. The saw was guarded at the time of the incident.,0
"An employee was using a bandsaw to cut lumber from wood pallets when a piece of lumber became stuck. As he attempted to remove the piece of wood, the blade amputated his right thumb. The saw was activated at the time of the incident.",1
"An employee was working at the shop running a 10-inch-long, 3-inch-wide piece of metal through a homemade roller machine. The employee was attempting to curve the piece of metal so that it would go on a wheel. While running the piece of metal through the roller, the employee's index finger was caught between the metal and the roller. The employee's right index fingertip was smashed and cut, resulting in a soft tissue amputation.",0
An employee was moving a 9-foot cart full of packages when his right pinky was caught and de-gloved between the cart and a pole. He was hospitalized for surgery.,1
"On January 5, 2017, at approximately 10:20 AM, employees were moving a small safe in order to renovate the floor and wall behind the safe. They attempted to lift the safe one corner at a time to place a shim under each corner. While they were placing a shim under a corner, the safe slipped off the pry bar and caught the injured employee's left-hand index finger, crushing it to the middle knuckle. The finger had to be amputated.",0
An employee was cutting off a tree branch with a chainsaw while standing on a guard rail. The branch pushed back and struck him in the chest. He was pushed against another tree and fell off of the guard rail.,1
"An employee slipped on the wet concrete floor and fell, fracturing two bones in her left foot/ankle.",1
"An employee had trimmed tree branches and was descending from the tree. The employee's descending rope was tied to a branch that broke, causing the employee to fall approximately 25 feet to the ground. The employee suffered a fractured pelvis, a lacerated spleen, fractured ribs, a collapsed lung, fractured vertebrae, and a fractured left elbow.",1
"An employee was using compressed air to blow out an extrusion unit before completing a resin change over when the mechanical hopper gate closed, pinching and amputating the employee's right index, middle, and ring fingertips.",1
"A temporary employee was cleaning the mill grinder floor when he fell approximately 20 to 40 feet through a hole in the floor and struck the floor below, breaking his right arm, pelvis, and right cheekbone.",1
"An employee was using a tugger machine to pull wire through a conduit when the machine mounts broke free, causing the employee to fall backward and strike the metal racking. The employee suffered a hand laceration and cracked ribs, requiring hospitalization.",1
"An employee was loading a diesel generator onto a trailer when the load shifted and pinched the employee's left index fingertip, amputating it.",0
"While approaching a set of stairs, an employee fell and struck the leading edge of the second step injuring his left knee.",1
"An employee was cutting a 4' x 8' sheet of particle board with a table saw when the board kicked up, causing the saw's guard to flip up. He attempted to stop the board, but his right index and middle fingers were caught in the saw, amputating his right index fingertip.",0
An employee was being handed shelving units by a coworker when the coworker lost their grip and the shelving unit made contact with the top of the employee's head. The employee was hospitalized overnight with a head laceration and contusion.,1
"On January 7, 2017, at approximately 2:40 p.m., an employee was attempting to lay out structural steel pieces with the assistance of a forklift truck. A steel truss fell over and struck the employee's legs resulting in fractures and crushing injuries to both lower legs.",1
"An employee was on the dock helping to load/unload freight into/from trailers. At approximately 2:45 a.m., he attempted to move freight (boxes shrink-wrapped on a pallet) manually when a board became loose and broke away from the pallet, propelling him sideways into a nearby forklift. He broke three ribs and was hospitalized.",1
"An employee was lifting 6"" by 6"" lumber when he slipped and fell after stepping on a steel plate, causing the lumber to fall on his right hand and amputate his middle and ring fingertips.",0
"A crew was removing material (hot ash) from the outside of the loop seal on the power boiler. Once they finished removing the loose material, the crew was exiting the platform when the material inside the boiler gave way. The material came out of the boiler's manway door and contacted an employee burning his hands and the back of his legs.",1
An employee slipped on ice in the parking lot and fell fracturing the left femur.,1
"An employee slipped and fell on the sidewalk due to icy conditions, breaking the lower left leg in three places.",1
"While checking the surface quality of steel at the automatic blanking line, an employee fell into the shear bed area of the platform. The shear bed hold-downs then clamped onto the employee's left middle and ring fingers, fracturing them.",1
An employee was performing maintenance on a scrap conveyor when his glove was caught and his finger was partially amputated.,1
An employee was working on a saw when his right index finger came in contact with the saw blade resulting in a fingertip amputation.,0
An employee was working outdoors on some equipment/machines when he suffered frostbite to eight fingers.,1
"An employee was opening a valve he was repairing when he dropped the valve hand wheel. As he tried to catch it, the wheel crushed his middle fingertip, which had to be amputated.",0
"On January 6, 2017, at approximately 6:00 p.m., an employee was injured while working at the cant deck in the resaw area. Standing near four motor driven chains, the employee noted two 6-8 inch cants that were not laying flat. Wearing leather gloves, the employee adjusted the cants when his left thumb became jammed between the chain and one cant, resulting in amputation of the tip of his thumb.",0
An employee was cleaning out a heat exchanger when hot material blew back and burned 50 percent of the employee's body.,1
"An employee was working at the de-palletizer and reached with their right hand to retrieve a slip sheet from the top of the empty cans. The sweeper arm on the de-palletizer, which is located above the cans and pushes the cans off of the pallet and onto a conveyor belt, came down and caught her right hand resulting in a fractured right forearm.",1
An employee was transferring water at high pressure through a hose. The hose failed and a jet of water knocked the employee through the air approximately 150 feet. When the employee landed on the ground he suffered a shoulder injury.,1
"An employee was driving a clamp truck when it caught on fire, causing first and second degree burns to his lower back, wrists, and right leg.",1
"An employee was unstrapping lumber from a delivery truck when a beam fell from the top of the load and struck him, resulting in a T-12 compression fracture.",1
"An employee was feeding materials into a machine when her glove was caught in the rollers, pulling her fingers in and amputating her left hand.",1
An employee was placing a tire on a tire changing machine when the machine was activated via the foot pedal. The machine then caught and amputated the employee's fingertip.,0
"An employee was performing quality assurance/control on a stacker unit when the unit jammed. As the employee attempted to clear the jam, the stacker unit energized and the employee's right leg was caught and fractured between the roller and the kick-out.",1
An employee fell approximately 2.5 feet from a tender frame after finishing repairs on a motor resulting in broken ribs and a punctured lung. The employee was hospitalized.,1
"On Friday, January 6, 2017,at 9:30 a.m., an employee was helping a trailer being loaded with fertilizer. As he stepped forward to notify the driver that the trailer was full, he tripped and fell forward, hitting his nose on the step of the semi-trailer. He was hospitalized overnight with a broken nose.",1
"An employee fell 10 feet through a hole while removing a carbonate roof fracturing a wrist, eye socket and temple.",1
"On January 6, 2017, at around 10:00 AM, an employee was using a baker scaffold to patch concrete on interior walls when he fell about 4 feet to the hard floor below, fracturing his pelvis.",1
An employee was operating the aluminum mandrel lathe when a shaft part that he was cleaning on the machine flew off and struck the employee in the chest resulting in a fractured rib and a lacerated liver.,1
"An employee was cleaning a cotton bale press and was attempting to hit the stop button when his arm hit the ram-down button, causing the ram to come down and crush his right hand. His hand was amputated.",0
"An employee was working on a blowout preventer. When he went to remove the valve removal plug, pressure (approximately 300 PSI) released and struck him, blowing him 20 to 30 feet away. He was hospitalized.",1
"The injured employee was part of a two man team performing bird harassment at a landfill. The process required firing 12 gauge cracker shells to displace the birds. After a failed detonation, the injured employee proceeded to eject the miss-fired round. Immediately upon ejection, the miss-fired round denoted resulting in substantial injury to the employee's face and hand area. The employee was hospitalized and treated for the loss of his right eye plus damage to his sinus cavity and skull.",1
"An employee was retrieving a plastic part from inside a cooling tunnel when her finger became caught in a conveyor nip point, amputating her right middle fingertip.",0
"On January 6, 2017, at approximately 11:45 a.m., an employee was operating a radial arm saw and amputated a ring finger.",0
"An employee was on a ladder, visually checking and listening for possible air leaks on a line, when he slipped and grabbed a support structure next to the 180 gear. The forward motion of his weight caused his right hand to slide into the plastic gear, which amputated his right middle finger.",0
"On January 7, 2017, an employee suffered a thumb tip amputation while using a band saw to cut meat.",0
"An employee was delivering mail and climbing snow-covered stairs when she slipped and fell, fracturing her ankle.",1
"An employee fell while walking to the restroom, suffering lower leg/knee pain and a hip fracture.",1
An employee suffered a right middle fingertip amputation while cleaning a roller.,0
An employee slipped and fell on the floor resulting in a left wrist injury.,1
An employee slipped on ice and fell on the sidewalk outside the building. He suffered possible broken ribs.,1
An employee felt a sharp pain in his back and neck while picking up stock. The employee was admitted to the hospital.,1
"An employee was entering the store with a two-wheel hand truck when he slipped on the floor and fell, fracturing his left leg in two places. He was hospitalized.",1
"An employee was driving a cement truck to the company's yard when he stopped the vehicle to inspect his load. While he was inspecting the load, the lid for the control panel closed unexpectedly and lacerated his left middle finger. He was hospitalized and had surgery.",1
"An employee was attempting to use a pry bar to pry up on the bail of a lead pot when the pry bar slipped, causing the employee to fall 6 to 8 feet to the ground. He landed on his left side, cracking four ribs and fracturing two vertebrae.",1
"On January 7, 2016, at approximately 6:30 a.m., an employee was operating a man lift when a cable failed on the lift's guarded platform, causing the lift basket to fall over 8 feet to the ground below. The employee fell with the basket, breaking his left foot and ankle.",1
"An employee was getting in her car when she slipped and fell on ice, breaking her right femur.",1
"An employee was attempting to remove meat from a meat grinder when it activated and fractured the employee's left arm, requiring surgery and hospitalization.",1
"An employee was helping a forklift operator fill spill kits in the warehouse when the forklift ran over the employee's foot. His right foot was caught between the counterweight and the wheel of the forklift, breaking the second and third toes.",1
"An employee was repairing a valve on a solid waste collection truck hydraulic lift. The hydraulic lift was raised while the employee was working underneath the arm. The lift came down and the arm fell on the employee, crushing the left side of his body and causing a concussion.",1
"On January 7, 2017, an employee was operating an overhead crane to lower a section of tooling into a stationary stamping die. He leaned on the stationary stamping die to ensure that the tooling was lined up. As he lowered the tooling, his left fingertip was caught and partially amputated in the opening/pinch point.",0
"An employee leaned over to pick up a utensil when he lost his balance and fell to the ground, fracturing his hip.",1
"An employee was performing building maintenance. As he was climbing a fixed ladder on the outside of the building, he slipped off the ladder and fell 10 feet to the concrete below, fracturing his T12 vertebra.",1
A temporary employee was operating a drill press when their glove was caught and their left thumb was amputated to the first knuckle.,0
"Employees were using an air hoist to lift/move a crossover sub (pipe) on the platform floor. The lifting cap on the air hoist failed and the load fell on an employee's hand, causing a burst wound in his palm and a fracture in the bottom bone of his hand.",1
"On January 7, 2017, an employee slipped and fell while leaving the breakroom, fracturing her right femur.",1
"An employee and a coworker were simultaneously pouring two 5-gallon buckets of 34% hydrogen peroxide and a catalyst down a floor drain when a violent chemical reaction occurred, exposing them to gases and corrosive liquid chemicals. The employee was hospitalized with first and second degree burns to the face, neck, and arms.",1
"An employee was walking into work when she tripped over a chair and fell, fracturing her right hip.",1
"An employee was ringing out a customer at the cash register when she walked around the shopping cart to scan a product. As she was returning to the register, she struck the corner of the cart and tripped and fell, fracturing her left hip.",1
"An employee was removing a rigid metal flow line from a parts basket when the flow line shifted and fell on the employee's right leg, breaking the tibia and fibula.",1
An employee was stepping off a tanker trailer ladder to the ground when she twisted and fractured her left knee.,1
"An extrusion machine became backed up. Employees dissipated the energy and were going to remove the machine's die plate when a pressure buildup caused the plate to blow off and strike an employee in the right arm. He fell onto his left side, fracturing three ribs and separating his right shoulder.",1
An employee was coming down a mobile staircase when he missed the last two steps and fell. He fractured his lower left leg and left wrist and dislocated his left elbow. He required surgery.,1
An employee was reaching for a box on a shelving unit when he slipped and his ring became caught on the shelf. His left ring finger was then partially amputated.,0
"An employee fell while climbing truck steps to close the trailer door, suffering a broken left elbow. The steps were slick and icy at the time.",1
"An employee was attempting to load a gearbox onto a container vessel. His hand was between the gantry crane spreader bar and the box when the crane lowered, catching and amputating the employee's left middle fingertip.",1
"An employee was flattening out sheets of wire mesh when his right middle finger was caught between two wire bundle sheets, amputating his right middle fingertip without bone loss.",0
An employee was unclogging material from a flour hopper when a pneumatic gate fractured his right thumb. The gate was not locked out at the time of the incident.,1
An employee was mounting the rear riding step of a refuse truck when his hand entered the refuse truck hopper where the sweep blade was running. The sweep blade caught and amputated his right middle fingertip.,0
"An employee was walking towards the kitchen when she slipped on the wet floor and fell shattering her right kneecap, requiring hospitalization.",1
"An employee was putting print plates onto the drums of an open machine on site when the drum moved and the employee's hand was caught in the machine. The employee's hand was crushed, requiring hospitalization and surgery.",1
An employee was unloading a truck when the employee's left middle fingertip was pinched and amputated between two steel beams.,1
"An employee tripped on a rug and fell to the floor, suffering a fractured femur and arm and nose injuries.",1
"An employee was stocking a bakers rack when her foot became stuck. When she reached around the rack, she fell to the concrete floor, fracturing her right femur and possibly her right kneecap.",1
"An employee came in contact with a bus bar, suffering serious electric burns to his hands and face.",1
"An employee was making a delivery at a customer's location when he slipped and fell on ice, injuring his left ankle and requiring hospitalization.",1
An employee was exposed to meth lab chemicals while responding to a meth lab explosion.,1
"An employee fell on an icy street while delivering mail, fracturing the right ankle and lower right leg and requiring surgery.",1
"An employee was on the ground helping a front-end loader recover a disabled vehicle (semi/tractor). The operator of the front-end loader did not see the employee and dropped the bucket, which struck the employee and caused back and lung injuries.",1
An employee was assisting a press operator and attempting to remove a piece of scrap from the press when the machine cycled and amputated his right hand.,0
"An employee was servicing a conveyor belt system to free a jammed shirt. He was using a knife to cut away the shirt and free the jammed system when his shirt was caught by the conveyor belt. The belt then pulled his left hand between the roller, the belt, and the frame, causing burns to the back of his left hand from his knuckles to his wrist and lacerations to the underside of his left thumb.",1
An employee was cleaning a pasta extruder. The employee's right arm was inside the extruder when it was activated and pulled the employee's arm inside. The employee was hospitalized.,1
"An employee was dispensing cleaning chemicals when the chemicals spilled on the floor and mixed together. While attempting to clean up the spill, the employee inhaled the fumes and experienced difficulty breathing.",1
An employee was helping a coworker with an irregular package when he lost his footing on metal grating and fell through the hole of the safeguards onto the concrete. He broke his right upper arm and was hospitalized.,1
An employee fell in the gravel parking lot and broke their right ankle.,1
A maintenance employee was searching for a jam on an auger when the auger lacerated/amputated the employee's right index fingertip.,1
"On January 9, 2017, an employee slipped on the sidewalk/parking lot while picking up a car to go on an assignment. He lost consciousness, fractured his skull, and suffered a hemorrhagic contusion.",1
An employee was driving when his vehicle hit a fire hydrant. He injured his left knee.,1
"An employee was dumping items from a lugger into a metal dumpster. When the employee lifted the lugger and released the handle, the handle hit and amputated his left third fingertip.",0
"An employee fell to the ground while walking on an icy tarmac to refuel his tug, fracturing his hip.",1
An employee fell off a step ladder while changing air lines and suffered a head injury.,1
An employee was checking a tote that had a mix of sulfuric acid and chlorine when it exploded. Shrapnel from the tote amputated his right arm and partially severed his leg.,1
"An employee was working in a high-pressure pump room when he slipped on the floor and his hand was caught on the pump equipment. Both of his hands were lacerated, and his right index and middle fingers were possibly broken.",1
"A consumer used a 3-inch paring knife to stab an employee in the right shoulder, puncturing the employee's lung.",1
"An employee was preparing to shoot a fluid level on a well. He screwed an echo gun onto the well casing and opened the casing valve. When the pressure hit the gun, the outside of the casing valve threads failed and the pressure popped, releasing H2S (hydrogen sulfide) gas into the employee's face.",1
"An employee on a baker's scaffold reached over to tie a wire lath when the scaffold tipped and he fell 5 feet 6 inches to the ground, fracturing his left femur. The scaffold had guardrails and the wheels were locked at the time.",1
"An employee was driving a forklift when the tie strap behind his seat began falling off. As he grabbed the strap, the end of it became caught in the tire, causing the strap to cinch and lacerate his right pinky, ring, and middle fingers.",1
An employee was working on a dock when she stepped out from between two pallets and was struck by a clamp truck. She was knocked to the ground and suffered a compound fracture to her left wrist.,1
An employee was operating a table saw when a piece of wood kicked back. The employee's fingertip was amputated.,1
An employee was treating a patient when the patient assaulted her. She was hospitalized with possible lower back and neck injuries.,1
An employee was operating a hydraulic lift on the back of a pickup truck to lift a washing machine when the employee's left index finger was pinched and partially amputated to the first knuckle. The lift was not guarded at the time of the incident.,0
An employee on a 12-step ladder fell 10 feet to the concrete floor while running new electrical wire overhead.,1
An employee was replacing a natural gas pipeline when he slipped on ice and fractured his left ankle.,1
"An employee suffered a groin hernia while trying to lift a toppled 55-gallon drum, requiring hospitalization.",1
"An employee was on a ladder installing a recessed light when the ladder (which was nailed into the wall) came away from the wall. The employee fell with the ladder, breaking the right femur and left leg below the knee.",1
"An employee fell while walking on an icy roadway to make a delivery, breaking the right ankle and requiring surgery.",1
"An employee was called to repair a leaking lift cylinder on a forklift that was outdoors. The employee set the parking brake, tilted the mast to a vertical position and extended the mast to gain access to the secondary lift cylinder. The employee was standing on the dashboard cowling of the forklift between the mast and the overhead roof structure. Thee employee's foot engaged the tilt lever on the forklift, and the mast tilted backward and pinned the employee between the mast and roof structure. The employee suffered a fractured pelvis and ruptured stomach, requiring surgery.",1
"An employee was making a home delivery of propane when the gas released and ignited, causing a flash fire that burned his right hand, left leg, and face.",1
"An employee was outside a parking booth, using an ice scraper/breaker to break up ice on the ground, when ice/snow slid off the roof/side of the parking garage and struck her in the neck and head. She suffered a neck sprain/strain and required surgery.",1
An employee was changing letters on a reader board while standing on an 18-foot extension ladder when he fell to the grassy ground below and landed on his back. He bruised his spinal cord and required hospitalization.,1
"While operating a stand-up counterbalance lift truck, an employee lost control of the steering and dismounted from the moving lift. He was caught between a rack and the lift, breaking his right femur and lacerating his hip. He was hospitalized.",1
"An employee was setting up to move chemical from a tank to a drum when a hose came loose and chemical splashed on the employee, burning the upper left arm and left side of the body. The employee was hospitalized.",1
"An employee was replacing a belt on an electric motor when his left hand was caught between the belt and pulley, cutting and fracturing his hand and ring finger.",1
"An employee had rigged slings and shackles to a 419-pound fan silencer and communicated to the crane operator via radio to cable up. A coworker was helping stabilize the silencer because it was upside down in the shipping crate. While trying to stabilize it, an employee's fingers were caught between the silencer leg and the ground.  His left index fingertip was crushed and had to be amputated, and his left middle finger was lacerated.",1
An employee was setting up his equipment and caught his finger between the anti-lock roll and doctor roll crushing and severing the right middle finger. The employee was hospitalized for surgery.,0
"An employee was helping a carry deck crane operator deliver items to the field. He followed the crane in a golf cart to the fab tent to retrieve equipment. As he was walking out of the fab tent with a strap in his hand and looking down at the strap to perform a visual inspection, the crane operator was putting his outriggers down. They did not see each other and an outrigger caught the employee's big toe. The outrigger smashed the steel toe of his boot, splitting and breaking his big toe.",1
"An employee tripped over a window opening and fell off a balcony, breaking ribs and an arm and suffering internal injuries.",1
"An employee was carrying a piece of glass from the truck into the building, tripped on a curb or uneven part of the sidewalk, and fell breaking ribs and puncturing a lung.",1
"An employee was performing general clean up duties with a fire hose and shovel when an explosion occurred. The employee suffered severe head trauma, contusions and a broken rib.",1
An employee was inside the sand hopper breaking up the frozen sand in preparation for concrete manufacturing. His legs were caught in the two hopper blades when it closed causing injury that required hospitalization.,1
An employee was operating a grinder and lacerated the left inner thigh requiring hospitalization. The grinder was not guarded at the time of the incident.,1
An employee was working in the restaurant and was shot in the chest during an attempted robbery.,1
An employee was stabbed in the abdomen by another employee with a sharp object.,1
"An employee was walking from one building to another, slipped on ice, and fell in the parking lot. The employee broke a rib and was hospitalized due to a possible punctured lung.",1
"An employee was replacing the thermostat on a pole hauler truck. He was accessing the engine from the passenger side fender using a step ladder. As he was transitioning from the ladder to the fender, the ladder became unstable and the employee fell resulting in a fractured right femur.",1
"An employee was changing a polished rod when the employee's hand was caught between a well head and a block, crushing the ring and pinky fingers.",1
An employee fell and sustained a head injury while closing the pit door.,1
An employee was using a drill press to drill pilot holes in sheet metal and plastic components when the glove on the employee's left index finger was caught by the drill bit. The bit pulled the employee's index fingertip in and amputated it between the fingernail and first knuckle.,1
"An employee was removing an EMS gurney with an injured patient on it and felt a ""twinge"" in his neck.",1
An employee was removing residual meat from the paddles of a grinding machine when the machine cycled and broke his right hand. The machine was on at the time of the incident.,1
An employee fell six feet from a ladder and fractured vertebrae.,1
"Two employees were removing an air bladder shaft from a paper core inside a plastic roll.  The roll was on a pallet on the floor.  An employee was stationed at each side of the roll.  The injured employee (temporary employee) was pushing the air release valve signaling the other employee to remove the shaft.  When the shaft was removed, the injured employee's right index finger was caught between the core and the air release valve causing a fracture/laceration to his right index finger.  The injured employee was wearing cut resistant gloves.",0
"An employee was operating a wrap saw to cut cardboard when the saw jammed. As he attempted to unjam it, the saw blade lacerated his arm. The saw was guarded at the time.",1
An employee was baling material and using a retractable box cutter to cut a box down to bale it when the blade went through the cardboard and lacerated his left wrist requiring hospitalization.,1
"An employee was retrieving a hard hat that had blown off his head and onto the grass when he slipped on the wet grass, twisting his ankle and falling to the ground. The employee suffered a fractured left fibula with bone chips in the vicinity of his ankle and ligament damage. The employee was hospitalized for surgery.",1
"An employee tripped and fell over a cord while walking to the rear of a deli slicer, fracturing the right tibia and fibula and requiring hospitalization.",1
An employee fell off a ladder and broke his ankle.,1
"An employee was climbing to the top level of a steel commercial building under construction to perform decking work. The employee climbed to the first elevated level and his hard hat fell to the ground level below. The employee went to the edge of the level to ask someone to get his hard hat for him. At this time, the employee lost his footing and fell to the ground below causing broken arms and injuries to his face. The employee was hospitalized for treatment.",1
An employee was moving material using a pallet rider and fractured their left foot when it was caught between a yellow steel shelving guard and the pallet rider.,1
"An employee slipped and fell on an ice-covered sidewalk in the parking lot, breaking her hip and requiring hospitalization.",1
"An employee was walking into a residential setting to repair a furnace when he slipped and fell on the icy pavement, hitting his head and fracturing his skull.",1
An employee was walking downstairs at the facility when she missed the last step and fell.  She reached out with her left arm to break the fall and suffered a broken humerus and dislocated shoulder.,1
"On 01/10/17, an employee was taking a part off of a manual lathe, lost his balance, and fell striking his upper back against the machine. The employee was hospitalized.",1
"An employee was attempting to locate an underground conduit by using a fiberglass duct rod with an attached copper wire. The rod came into contact with a ground bar inside a switch gear, causing an electric shock that burned the employee's shoulder and both feet.",1
"An employee was unloading a trailer using a pallet jack. When the employee exited the trailer, the dock plate initiated an automatic reset (a feature of the plate by which it senses a potential trailer pull and will raise itself up to settle back into place in order to maintain a flush surface with the surrounding dock). When the plate began its reset cycle, the employee had already started to back up and while the plate was elevated, the employee's left leg contacted the plate edge fracturing the lower leg.",1
"An employee was operating a crane or hoist that malfunctioned and was knocked 20 feet from a platform to the ground, breaking legs, ankles, hands, and arms. The employee was hospitalized.",1
"An employee slipped and fell on ice in the parking area, suffering a lower leg injury that required surgery.",1
An employee was removing a light enclosure. He was standing on a 8-foot A-frame ladder and was on the fifth step when he lost his balance and fell to the ground. He injured his left knee and was hospitalized for surgery.,1
An employee was placing rebar into the bending machine and amputated the right index fingertip when the machine was activated. The machine was not guarded at the time of the incident.,1
An employee was walking behind a forklift and was struck by the forklift resulting in a broken right ankle and hospitalization.,1
"An employee fell approximately 10 feet while removing formwork, suffering trauma to both arms, the face, and the torso.",1
An employee was assisting a customer to unload a flatbed trailer and fell to the ground suffering a head contusion and a right hip fracture.,1
"An employee was moving a metal locker unit when the wind caught the unit, causing it to lacerate the employee's right forearm.",1
An employee suffered a crushing injury when a part revolution press ghost cycled.,1
An employee was cleaning a cheese making machine and amputated his left thumb and sustained crushing injuries to three other fingers on the left hand.,1
"On January 11, 2017, an employee was removing product that had fallen under the conveyor when their arm was caught in the conveyor guard. The employee was hospitalized with fractures and lacerations to the left arm and hand.",1
An employee was tapping on the valve. A 3-inch valve fell off the load line and struck the employee's right shin resulting in a broken lower leg.,1
"An employee was unloading cattle. While in the pen, a steer came from behind and knocked him over. The steer then stepped on the employee and kicked the employee in the head. The employee was hospitalized for broken ribs and a bruised forehead.",1
An employee was loosening rusty bolts on a traffic light and aggravated an existing hernia. The employee was hospitalized for surgery to repair the hernia.,1
"An employee was operating the waste chopper. The auger of the waste chopper is driven by two belts that are on a single wheel/sprocket; the belts and the motor that drives them are locked in a cabinet. As the employee was accessing the cabinet to retrieve a tool, his right thumb was caught in a pinch point between the belt and pulley, resulting in amputation. The machine was running at the time.",0
An employee was delivering glass to a shop. The glass started to fall off the side of the truck. There was a bystander that could have been injured by the falling glass. The employee pushed the bystander to prevent her from being injured and the glass fell on him cutting his head and foot.,1
"Employees were performing maintenance work on an HVAC unit on the roof of the building. As an employee was descending a ladder, his right leg slipped and he fell 10-12 feet to the concrete floor fracturing both legs and ankles.",1
An employee slipped on an ice covered roadway and fell fracturing the right ankle and tibia.,1
An employee was at the back of the truck loading trash into the truck when the employee inhaled an unknown chemical fume resulting in respiratory problems. The employee was hospitalized.,1
"An employee was walking through the workplace parking lot to go in to work when an individual drove up, got out of their vehicle, and shot the employee in the back.",1
An employee was welding on stainless steel when his welding rod caused a first degree burn to his left hand.,1
"An employee was dismounting a man lift, twisted his ankle and fell onto the man lift platform fracturing the left tibia.",1
An employee slipped on ice in the parking lot and fell resulting in a skull fracture.,1
"An employee tripped on a phone cable while standing up from a break table, fell and hit his back on another table fracturing three ribs.",1
An employee slipped on a wet/icy ramp and fell fracturing their pelvis.,1
An employee was signaling a load into the terminal when his foot got caught in the chain rigging as it moved.  The employee suffered multiple foot fractures.,1
"On 1/11/2017, an employee slipped on ice while walking to her car during working hours. 
The fall resulted in a head injury requiring hospitalization.",1
"On January 11, 2017, an employee slipped and fell while preparing food. The employee was hospitalized for a fractured hip.",1
An employee was using a table saw to cut plywood to size.  The employee's right ring and middle fingertips were amputated at the first joint when the fingers came in contact with the table saw blade. The saw was not guarded at the time of the incident.,0
"An employee was getting out of their vehicle in the employee parking lot, slipped on black ice, and fell fracturing the left ankle.",1
An employee was using a band saw to cut meat and amputated the right index fingertip below the last knuckle.,1
"An employee was walking into work when he slipped on ice, fell, and broke his right leg.",1
An employee amputated a finger while working with a machine.,0
An employee was using a torch to cut a 10 inch diameter pipe for removal on top of a pipe rack approximately 30 feet high. The employee's fall protection equipment was unhooked to move down the pipe. The employee lost his balance and fell 30 feet resulting in two broken wrists.,1
An employee was cleaning the tumbler and amputated the left pinky fingertip.,0
"On January 11, 2017, an employee slipped on ice/snow covered grass and fell sustaining broken ribs and punctured lung.",1
An employee was preparing to cut a skin sliver with a meat saw. The meat slipped and the employee's fingers contacted the saw blade resulting in the amputation of the right middle and index fingertips.,0
An employee was using a step ladder in a garage while framing and fell resulting in a broken ankle.,1
"An employee was operating a Haeger Press and inserting a pem stud into a flat steel part.  While his hands were between the tooling on the machine, the machine activated causing his left thumb to be caught between the top anvil and the steel part and amputating the tip.",0
"An employee fell on ice in the parking lot, breaking the right leg.",1
An employee slipped on ice and fell while breaking down boxes and taking them to the dumpster resulting in a broken leg.,1
An employee was moving warped metal from one conveyor to another when a faulty control switch caused a retractable conveyor to extend and pinch the employee's finger. The fingertip was medically amputated.,0
An employee was attempting to remove a piece of wood that was lodged between the rollers and a piece of metal on the conveyor belt using a wrench. The employee's gloved hand was caught in the machine resulting in the amputation of the right pinky fingertip.,0
An employee was working on a pump trailer and was pulling on a wire in order to clean the door. The wire snapped and the employee fell off the trailer. The employee was hospitalized for a concussion.,1
An employee was walking into work when she slipped on ice and fell in the parking lot fracturing the right ankle.,1
"An employee was leaving work at the end of the shift, slipped on black ice, and fell fracturing the left ankle.",1
An employee suffered a hernia while cleaning the kitchen and lifting a floor grate.,1
"An employee on a pallet jack was exiting a grocery aisle. While attempting to step off and then back onto the pallet jack, the employee became caught between the jack and a rack, causing an open wound to the right big toe. The jack was moving at the time of the incident.",1
An employee was dressing a heat exchanger plate with a hand grinder. The grinder blade caught the edge of the groove being ground and the grinder fell out of the employee's hand striking the top of the employee's left foot and causing a laceration including separation of the big toe tendon.,1
An employee fell off of a lift gate on the side of a delivery truck when some mobile racks fell against the rack he was pulling off of the truck and pushed him backwards. The employee fractured his left ankle.,1
"An employee fell through a hole in the second floor and suffered broken bones, lacerations, and contusions.",1
"An employee was installing an aerator for a residential septic tank system when he became trapped in the aerator precast risers for approximately 26 hours with overnight temperatures below 30 degrees. He suffered kidney failure, hypothermia, frost bite, and edema.",1
"An employee was using a 24-inch pipe wrench to make up a connection on a sinker bar, which was on stands on the ground, when he lost his footing and slipped. His lower right leg became twisted and suffered a spiral fracture.",1
"An employee was prefabricating rebar pile cages on horses when his leg was struck by a rolling pile cage, fracturing his knee and requiring hospitalization.",1
"An employee lost his grip while descending a fixed ladder and fell approximately 8 feet, hitting his head on the floor.",1
"An employee and coworker were unloading an electrical cabinet from a box truck when the lift gate jerked, causing the electrical cabinet to shift. The employee lost control of the cabinet and jumped off the lift gate. When he landed he fractured his left femur.",1
An employee was using the table saw in the maintenance shop when the saw kicked back and cut his fingers. He suffered a right thumb laceration and amputation of skin from his first and second fingers. The saw was not guarded at the time of the incident.,0
"An employee skied into an area with little snow and skied onto rocks that were under the snow. The employee suffered a broken left arm and left patella, requiring hospitalization.",1
An employee was found unresponsive inside of a trailer with a running generator. He was hospitalized for carbon monoxide exposure.,1
"An employee was working on a display when she lost her balance on a 3-step step ladder.  She fell from the ladder and landed on the floor, breaking her hip and requiring surgery.",1
"An employee was installing a sign for a newly constructed gas station and was using a 14-foot extension ladder along with some hand tools. When he began to descend the ladder, it slid to the side. He then fell 12 feet to the ground below and injured his back, requiring hospitalization and surgery.",1
"On January 13, 2017, an employee suffered an electrical shock after stepping in a water puddle that was energized by 480 volts of electricity. The employee was hospitalized.",1
"An employee was stacking small boxes on a roller system when his foot caught on the frame of a roller and he fell to the concrete floor, breaking his left hip.",1
An employee was standing at his work station and rolled his ankle on the edge of the floor mat resulting in a broken ankle.,1
"On January 12, 2017, an employee was moving a personal owned vehicle and a government owned vehicle in a parking lot in order to have the snow removed. The employee slipped on ice and fell resulting in a fractured right hip and pelvis.",1
An employee was delivering mail to a mailbox when she slipped on ice/snow and broke her lower leg.,1
"An employee was walking the plant floor, slipped on a wet spot, and fell resulting in a compound fracture of the left forearm.",1
An employee suffered lower back pain while unloading cargo.,1
An employee was in a bucket truck removing a tree limb from an overhead cable wire when the limb fell on his hand and smashed his right ring finger against the control panel of the bucket truck. His fingertip was medically amputated.,0
"An employee was using a tree mulcher to clear trees and brushes for a fence. The mulcher had not completely shut down when his hand contacted the belts, lacerating two of his fingers.",1
"An employee was attempting to remove a jammed piece of wood from a waste wood vibrator conveyor and his index finger was pinched between the wood and the vibrator conveyor, amputating his fingertip down to the bone.",0
"An employee was driving a reach truck down an aisle and stopped. When he started the truck back up, it struck a rack. The employee's left hand was pinned between the reach truck and the rack resulting in the amputation of his left index finger and middle fingertip.",0
"On January 12, 2017, an employee was loading a box of water into a company vehicle. When he bent over to pick up the water, he injured his lower back.",1
An employee suffered a hernia while lifting a patient.,1
"An employee was at a home turning the propane gas back on when a flash fire occurred, burning his hands, arms, back, and legs.",1
"An employee was operating an automated gang saw/flat bed saw and had loaded a new part. He was attempting to clean cut chip debris from the saw when the clamp came down and caught his left hand, partially amputating his pinky finger.",0
A maintenance employee was working on the filet machine when the operator restarted the machine while the employee's hand was still inside. The employee lost a left knuckle. The machine was not locked out at the time of the incident.,1
"An employee was rigging up a building top-drive track and had the drive track hoisted when he saw something in the pin hole. As he attempted to remove the object, his right index fingertip was caught and amputated in the pin hole.",0
An employee was working near an open metal door at the shaving bin. The door swung closed and struck the employee on the head.,1
A cross arm fell and hit an employee in the head.,1
"An employee was troubleshooting a press. The powdered metal is gravity fed through a tube into the die and the die shoe was not moving properly. The press was put into set up mode and the employee attempted to jog the shoe slightly. While the arm was jogging, a small metal arm of the shoe caught the employee's finger and pinched it between the shaker and the shake stop box. The fingertip was later amputated.",0
"An employee was spraying a fungicide when he experienced a headache. He was inside a greenhouse and went outside to get some fresh air. When he returned to the greenhouse, the headache became severe. He was hospitalized with a brain hemorrhage.",1
An employee was working with a portable x-ray machine. As the employee was bringing the patient forward onto the x-ray she suffered pain in her lower back on the right side. The employee suffered a bulging disc in the lower back.,1
"An employee was about to install a fascia board on a roof. When he climbed out of a lift bucket onto the roof, he lost his footing and fell approximately 13 feet to the ground below. He broke his ankle and required surgery.",1
"On January 12, 2017, an employee's left hand contacted the blade of a miter saw during work activities. His hand was lacerated, requiring hospitalization.",1
An employee was cleaning up the area and drove over a manhole. The lid fell into the manhole and the employee went into the manhole to retrieve it. The employee slipped and fell resulting in a broken right tibia.,1
An employee was building forms for a concrete pull box and stepped on an X brace. His foot slid down the brace and he severely rolled his ankle resulting in a broken tibia.,1
An employee suffered an allergic reaction to powder coated nitrile gloves.,1
"An employee was moving a steel ventilation louver with a chain fall attached to a crane hook. The louver was then transferred to a chain fall attached to the ship. The louver was then lowered into position. The lover was sitting on the lip of the foundation and held back with another chain fall attached to the ship to prevent crushing the ship's signal box. The louver was disconnected from the crane hook to move into position.  While the employee was repositioning the louver to a second chain fall, it slipped off the foundation and fell on the employee's right foot. The employee's toe was amputated while in the hospital.",1
"Employees were repairing a headache rack for a pickup truck. The headache rack was taken off the truck and placed on jack stands; however, the headache rack was not level. The employees attempted to level the headache rack by placing another jack stand under the rack. As the jack stand was being placed under the headache rack, the rack fell off the jack stands. An employee was on top of the headache as it was being leveled. The employee fell off the rack and landed on wooden pallets that were next to the rack. The employee suffered a back injury and was admitted to the hospital.",1
"An employee exited the forklift to move a box. As the employee was pulling/moving the box, it gave way and the employee fell backwards and broke the left wrist.",1
"An employee was cleaning a cooking kettle when boiling water splashed onto him. He received second degree burns to the torso, right arm and leg.",1
An employee was pulling an LP gas hose to fill a residential LP tank and slipped on ice and fell breaking his hip.,1
An employee tripped on the stairs leading from the parking lot to the building.,1
An employee slipped on ice on the roof deck and fell on the roof deck suffering a pinched nerve in his neck.,1
"A BP employee and two contractor employees were conducting a pre-job assessment at the electrical sub-station when an electrical arc flash occurred from an electrical box, injuring all three employees. The BP employee suffered facial burns.",1
"An employee was moving a 6-inch diameter, 13 foot length pipe onto a pipe rack. The injured employee went to help this employee move the pipe and grabbed the end of the pipe with his hand. The pipe became too heavy and the employee dropped it. The pipe came down on the employee's hand, pinching his hand between the pipe and some angle iron resulting in a fingertip amputation.",0
An employee was prepping a tank trailer for cleaning and received second degree burns to the back and neck from steam.,1
"While cutting a piece of wood trim on a table saw, an employee cut the fingers on the left hand. The pinky finger required amputation at the hospital.",1
An employee was working on a ladder and lost his balance falling three to four feet. The employee suffered bruises to his buttocks and a possible back injury.,1
"An employee was assisting another employee to clear a jam in the grinder. The employees were manually rotating the blades to clear the jam and the injured employee's left hand/fingers came in contact with the blade causing the amputation of the middle, ring, and pinky fingertips.",1
An employee slipped on an icy sidewalk at a client site and fell shattering a knee and requiring hospitalization.,1
An employee slipped on ice and fell breaking the tibia and fibula bones.,1
An employee was unjamming a trimmer machine and suffered a severe laceration and fracture to the right arm when one of the interlocks failed. The machine was guarded and interlocked at the time.,1
An employee operating a forklift lowered the forks while another employee was loading it. The employee's finger was caught between the pallet and floor resulting in amputation of the right middle finger to the first knuckle.,1
An employee was adjusting a needle valve on the flow indicating rotameter. The needle valve disengaged from the rotameter and caustic solution was sprayed in the employee's face. The employee was hospitalized for treatment.,1
An employee went to retrieve a package from the car and was cut by a razor inside the box. The employee was hospitalized.,1
"An employee was operating a press and as the employee was removing an 8 inch tall part, the employee's pinky finger was partially amputated.",0
An employee was walking and tripped over forklift forks that were on the ground. She fell and fractured the left hip.,1
An employee was rewinding the label on a label machine using her left hand. She used her right hand to jog the machine forward and was using her left hand to load the paper on the paper winder. The tip of her glove was caught causing her left hand to wrap around the rotating post and the cardboard core resulting in a left wrist fracture and dislocation as well as a fifth index compound fracture and a fourth index fracture.,1
"On January 13, 2017, an employee's left ring fingertip was amputated while clearing a jam from the mesh machine with a hook-like tool. Upon removing the plug, stored air pressure released causing the cylinder to come down on a fixed part and created a pinch point.",0
"On Friday, January 13, 2017, at approximately 8:20 AM, an employee was moving rebar on the third floor when he stepped out onto unsupported plywood and fell approximately 10 feet onto the second floor stairway. The guardrail had been removed the previous evening to allow removal of formwork and was not reinstalled. The employee suffered a compression fracture of the T11 vertebrae.",1
"An employee suffered chemical burns to the arms, back, chest and legs when LBX-106 splashed onto the employee as the employee was preparing to mix products.",1
An employee fell eight feet from a roof.,1
An employee was operating a mixer in the production department and was forming a 15 inch round concrete pipe. The employee's right hand was caught inside the pipe between a concrete rotor and the form resulting in the amputation of three fingers.,0
"An employee was attempting to move a tool, described as a tool to assemble/disassemble generators, from a storage shelf to the floor with the assistance of a second employee. While moving the tool, the employee's right thumb was caught in a movable bracket. The employee was wearing cut resistant gloves; however, when the bracket pinched his thumb he jerked his hand and tore skin from the end of the thumb. The employee's thumb tip and finger nail were amputated.",0
"An employee slipped on ice in the parking lot, fell, and broke his right leg.",1
An employee was attempting to light a pilot light on a gas oven when a flash fire occurred. The employee sustained first degree burns to the hands and face.,1
"An employee was standing on tube steps, leaning over and dumping a bag of cellulose into the hopper. As he was dumping, a piece of the bag went into the hopper. The employee used a stick to drag the paper out. His stomach hit the control lid that moves up and down catching his left arm between the lid and lip of the hopper. He slid his arm out causing an abrasion and swelling requiring hospitalization.",1
"An employee was operating a yard truck to move trailers around the yard. He was moving a trailer into an open area and struck a light post. The employee was ejected from the yard truck and sustained a cut to his head, a sprained neck and a knee injury requiring surgery.",1
An employee working from a 5 foot rolling safety ladder fell and suffered a head injury.,1
An employee tripped over a box and fell fracturing the right arm and dislocating the left arm.,1
"On January 14, 2017, an employee was attacked by a bull while preforming routine work duties. The employee suffered a broken collar bone, a broken scapula, a head wound and a concussion.",1
An employee fell from an A frame ladder and suffered a right leg injury requiring surgery.,1
"On January 14, 2017, an employee was attempting to break up a fight between two clients and was struck in the eye twice by a closed fist. The employee's orbital socket was fractured.",1
"An employee was cooking when a can of aerosol cooking spray that was sitting on the top shelf above the stove exploded, resulting in second degrees burns to his arms and neck. He was admitted to the hospital.",1
An employee was walking up the ramp of an equipment trailer when the grating on the ramp suddenly gave way and his foot fell through the ramp grating fracturing the lower right leg.,1
Maintenance staff had just cleaned the floor using a floor cleaning machine. An employee slipped on the wet floor and fell resulting in a hip injury.,1
An employees was attempting to restart the snowmaking equipment on a steep section of the ski trail when he slipped on an icy part of the walkway and slid approximately 200 feet down the hill landing in a ditch. The employee complained of chest pain and difficulty breathing. He also had a laceration to his face.,1
An employee was pulling product from a shelf and tripped and fell. The employee suffered internal bleeding and spleen and kidney injuries.,1
An employee was attempting to do a monster truck backflip maneuver. The truck did not make a full revolution and landed upside down. The employee suffered a hematoma that required surgery.,1
An employee fell from the back of a walk-behind/stand-on skid steer and struck a rock resulting in a fractured right femur.,1
An employee was climbing a ladder carrying welding leads when the ladder kicked out from under him causing him to fall 16 feet. The employee suffered a fractured pelvis and a broken arm.,1
An employee was cooking at the stove. A small pan of hot oil was on a ledge above the stove. The employee reached up for the pan of hot oil and knocked it over. The hot oil spilled onto her chin and chest resulting in burns.,1
An employee was performing routine trail checks and fell while skiing. The employee sustained a torn pectoral muscle with internal bleeding.,1
An employee was returning from their car after a break when they slipped on ice and fell in the parking lot. The employee suffered a broken right tibia and fibula and was hospitalized for surgery.,1
An employee tripped over a toolbelt that was left on the floor and fell resulting in a hip injury.,1
"An employee was operating a tug. As the tug turned a corner, it tilted onto two wheels and the employee's left foot was caught between the tug and a tire rack resulting in a laceration to the foot.",1
An employee was leaving work and fell down the stairs at the loading dock injuring their neck and right arm.,1
"An employee climbed a ladder to the top of the fitting room to fix a broken light cover. When the employee stepped onto the fitting room ceiling, the ceiling tile collapsed causing the employee to fall to the floor and fracture his T2 vertebrae.",1
An employee was using a step ladder to clean a vent hood over the chicken fryer. He lost his balance and stepped onto the fryer removing the fryer lid. His right foot went into the hot oil resulting in burns to his foot and ankle.,1
"An employee was operating a manual pallet jack and ran into a metal fruit bin, striking his right thumb on the bin. The employee sustained a deep cut to the thumb of his right hand.",1
"An employee was getting up from her desk, tripped over a cord, and fell striking her head and breaking a hip.",1
An employee was hospitalized when his leg was pinned between two pallet cargo transporter units.,1
An employee stepped on a weak spot in the roof while trying to repair a leak and fell through the roof approximately 15 feet to the floor below. The employee suffered a broken leg and a possible concussion.,1
An employee tripped over a tire and fell breaking the right hip.,1
An employee was setting up dies in a machine and amputated a fingertip.,1
"An employee was walking in the parking lot, slipped on ice and fell breaking a leg in two places. The employee was hospitalized.",1
An employee slipped on a patch of ice in front of the entrance to the building and fell breaking a leg.,1
An employee tripped and fell while carrying plates resulting in a fractured left shoulder and arm.,1
"An employee was waiting inside of his vehicle for the pipe to pull through and heard the equipment make an erratic sound. The employee stepped out of his vehicle to check on the pulling equipment. As he approached the cable pulling equipment, the cable released from its guide/pulley and whipped back and forth striking the employee and breaking an arm.",1
An employee was cleaning the air-lock machine attached to a cooker. The equipment was not locked out and it energized while the employee's hand was in the machine resulting in the amputation of the left index finger to the first joint.,0
"An employee was operating the shuttle van. When the employee stepped out of the shuttle van, the employee slipped on snow-covered ice and fell onto their side possibly fracturing the hip/pelvis.",1
"An employee was picking up stacks of scrap nylon sheets and throwing them into the hopper attached to the granulator. The sheets in a pile were bird-caging and the employee's left ring finger got caught in a hole in one of these sheets. As the sheet was pulled downward into the hopper by the action of the grinder, the employee's left ring finger was amputated and the index finger was fractured and lacerated.",1
An employee caught her foot in a pallet and twisted her back resulting in a back hernia that required surgery.,1
A temporary employee was operating an upcut saw and amputated his right thumb.,0
"An employee was working at the oil drill site repairing a compressor unit and was injured. The employee's injuries included broken teeth, a laceration under the chin and possibly a fractured jaw.",1
An employee parking his clamp/docker material handling equipment was exiting his machine when he realized it was still on. The employee's left foot was pinned between it and another parked docker resulting in three fractured toes.,1
"An employee was using a stand-up forklift to move palletized product. While pulling the forks out from beneath a pallet, the employee suffered two broken fingers on the left hand when the hand was caught between a warehouse rack and the forklift's outside roll cage.",1
An employee was cleaning meat from the door of a meat mixer and amputated the right middle finger above the first knuckle.,0
"On January 16, 2017, at approximately 3:30 p.m., an employee slipped on ice and fell. The employee was hospitalized for a concussion and bleeding on the brain.",1
"An employee was installing a light fixture, contacted a live wire, and fell off a ladder. The employee sustained multiple skull fractures, facial contusions, and a burn on his hand and arm.",1
An employee was standing behind a forklift and was pinned between two forklifts resulting in a leg injury.,1
An employee was walking through a customer's yard during installation when he tripped over debris and fell breaking an arm.,1
An employee fell approximately 5 feet from a ladder resulting in a head injury.,1
An employee slipped on ice in the parking lot and fell breaking the right ankle.,1
An employee was moving a pallet of goods from one slot to another using a pallet jack when the employee's finger became caught between the pallet jack handle and fixed racking resulting in amputation.,0
"An employee was changing the blade of the B-line chop saw located in the PMC finishing area. As he tightened a nut with a wrench, the saw activated and the wrench was ejected from the machine striking the employee in the face. The employee sustained a fractured nose and facial lacerations.",1
"An employee was cleaning parts for the Piab system (pneumatic transfer system for raw materials) using sani-wipes as part of the allergen clean process on the bar line. Parts were stored on a cleaning cart along the side of the bar line room away from the production line. The cleaning process includes cleaning two rod magnets. Six magnetic rods of varying lengths are arranged in parallel with 1"" spacing between each rod. The rods are connected by brackets to form a singular circular magnet approximately 13"" in diameter. During an earlier shift, the two rod magnets got stuck together. The employee attempted to separate the two magnets with his hands. During this process, the magnets shifted and pinched the tip of his left middle finger. When the employee jerked his hand away from the magnets, his fingertip was amputated.",1
"An employee was walking to her car at the end of her shift, slipped on ice and fell in the parking lot fracturing her tail bone.",1
An employee was clearing out the auger on the Zamboni and got their hand caught in the auger. The employee suffered torn ligaments and fractured fingers.,1
An employee fell from a lift at approximately 12 feet and incurred a fractured skull and face.,1
An employee was unloading material from the truck at a customer's location when he fell out of the truck approximately 4-5 feet. The employee sustained a broken sternum and ribs and internal bleeding around the lungs.,1
An employee was throwing parcels into carrier separations when he suffered chest pain.,1
An employee slipped on ice in the parking lot and fell breaking the left ankle.,1
"An employee was on portable stairs lubricating a hoist when he inadvertently activated the lift, tipping over the portable stairs. He fell to the floor resulting in a hairline fracture to his hip.",1
An employee was delivering parcels to a residence and was struck in the head with a pipe by a burglar.,1
"An employee was descending a ladder approximately 10-12 ft. high when the employee fell and hit his back on a fence. The employee suffered 4-5 fractured ribs, a broken ankle and a fractured orbital bone.",1
An employee was leveling the base of a unit with the use of a chain fall to lift the corner while adjusting the concrete anchor. The unit dropped and crushed his right index finger.,1
"An employee was entering a dormitory room to repair a leaking sink when he slipped and fell, injuring his head and back.",1
An employee was walking to her station and tripped on the leg of a shot blast screen (welding screen). The employee fell and fractured her right hip. She was admitted to the hospital.,1
An employee was using a razor knife to cut film. The employee was cutting with his right hand and steadying the film with his left hand. The employee cut towards his body and amputated the left index fingertip.,0
An employee was performing maintenance on the stick machine when he caught his hand on the saw blade and lacerated it.,1
"The injured employee was wiping off a roll of steel with a rag and cleaner. The employee directed another employee to rotate the roll. As the roll rotated, it pinched the injured employee's right pinky finger between the rolls of steel. The fingertip had to be amputated. The machine was not locked out/tagged out at the time.",0
"On January 17, 2017, an employee was placing salt on an icy sidewalk, slipped and fell backwards resulting in a fractured skull and brain hemorrhage.",1
"An employee was repairing a condensate line union when hot water burned his chest, abdomen, and left arm.",1
An employee was burned by hot water during plumbing activities.,1
An employee was adjusting a set screw inside a dough divider machine when the machine activated and amputated his fingertip. The machine was unguarded at the time of the incident.,1
"An employee was outside salting and sanding the property, slipped on ice and fell breaking his pelvis.",1
"An employee was cleaning a paint sprayer when the trigger was activated while his hand was in front of the nozzle, injecting his left middle fingertip with paint. He was hospitalized.",1
"An employee was walking into work, slipped on ice and fell resulting in a broken wrist that required surgery and hospitalization.",1
An employee was using a band saw to cut metal pipe. The pipe slipped and the employee's right thumb was amputated.,0
An employee slipped on ice at 7:45 a.m. while walking into work. The employee sustained a leg and knee injury requiring surgery and overnight hospitalization.,1
An employee was cutting frozen meat with a band saw. The meat moved and the employee's fingers contacted the saw blade resulting in a partial amputation of two fingers on the right hand. The saw was not guarded at the time.,1
An employee was working the first base media entrance and stepped between the magnetometer and the bag check table. She tripped over cable and fell breaking a hip.,0
An employee was servicing a heater when his right hand was caught in an inclined conveyor adjacent to the heater. The employee suffered a finger amputation on the right hand.,1
"An employee was trying to remove a tool extender bit from a hand drill wearing slip-resistant gloves. The employee grasped the tool extender bit and when the drill was turned on, the glove became entangled and torqued. His finger was squeezed between the glove and drill bit, amputating the left pinky fingertip.",0
"An employee blacked out and fell down the stairs, breaking the right arm.",1
An employee was operating a standup powered industrial truck (PIT) and struck another PIT. His left foot was caught between the two PITs and fractured requiring surgery.,1
"An employee tripped and fell while delivering mail, fracturing the right ankle.",1
"An employee was on a ladder tying off electrical wire on the ceiling when he suffered an electrical shock. He blacked out and fell off the ladder, hitting his head, twisting his ankle, and fracturing and contusing his back.",1
"On January 17, 2017, an employee was operating a brake press and lacerated three fingers on the right hand.",1
An employee was pulling a truck out of a ditch with the winch from another truck and amputated the left pinky fingertip.,0
An employee fell down the stairs and broke the right ankle.,1
An employee was cutting shingles with a manual shingle cutter and amputated the left index fingertip.,0
An employee was operating an excavator machine approximately four feet from an above ground power line when the power line arced out and electrocuted the employee who suffered second degree burns on the right arm and a broken wrist.,1
An employee suffered a heart attack while engaged in strenuous truck unloading activities.,1
An employee was walking through the yard and stepped on a piece of plywood on which other materials were stacked. The plywood shifted and the stack of rebar fell and struck the employee's leg. The employee suffered a broken leg requiring surgery.,1
An employee was pulling out a core from the laminator machine when his left index finger and thumb were crushed between the core and spindle chuck.,1
An employee was moving a trailer when the tongue dropped and landed on his finger resulting in a partial amputation of the right ring finger.,0
An employee was picking up a socket from the floor when a box from the upper shelf of the overstock wall fell and struck the employee's lower back causing a fracture to the lower back.,1
"An employee was inspecting a well at a customer's site when he slipped and fell on a patch of ice, breaking his rib and requiring hospitalization.",1
An employee was on top of a provisioning truck replacing snacks on an aircraft when his truck was pushed over by another aircraft that was being repositioned. He fell 10 feet and suffered a bruised lung and back injury.,1
"An employee was setting up a 32-foot extension ladder when the top part slid down on the employee's right thumb, fracturing it and tearing a ligament.",1
"An employee was on a ramp near the planes when he climbed on a loader and his foot slipped. He lost his balance and fell approximately 8 feet to ground, breaking his right ankle.",1
"An employee reached for his backpack when the strap contacted his service weapon trigger. When he applied pressure to the strap, the weapon fired and shot his right calf.",1
An employee fell off a ladder and shattered an elbow.,1
An employee was walking across a roof purlin to attempt to connect to a retractable lifeline when the purlin broke and he fell 20 feet to the concrete below. He broke his neck and suffered brain swelling.,1
"An employee was installing a door when his right thumb was caught between the door and the jam, severing it before the first joint.",1
An employee was running a machine when his hair became caught in it. His hair and scalp were then removed.,1
An employee was loading/unloading a truck when the vehicle rolled off the road and down a hill. The employee's legs were pinned underneath the truck. The parking brake and wheel chocks were not used at the time of the incident.,1
"An employee was going to a residence to provide emergency medical treatment to a patient with shortness of breath. The employee began having breathing problems and suffered poisoning once inside the residence, where the patient had set off insect foggers.",1
"An employee was working on an overhead garage door. He was in the bucket of a fork truck when he lost his balance and shifted his weight to the right side. The bucket's screws popped out and the bucket came apart. The employee fell 10 feet to the concrete floor, cracking his ribs and puncturing his lung. He was hospitalized.",1
"An employee fell 18 feet from a flat roof, suffering a lacerated spleen and broken ribs.",1
An employee fell from the top of a railroad car sustaining arm and pelvic fractures.,1
"An employee slipped and fell in the icy parking lot, breaking an ankle.",1
"An employee was pulling freight to the rear of the trailer to offload. When the employee turned the freight around, his left leg was caught between the lift gate and the rear of the trailer resulting in a soft tissue laceration.",1
"An employee's glove became caught in a shear machine, which crushed his index and middle fingers. He was hospitalized.",1
"While getting off a forklift, an employee slipped and fell 2 feet to the asphalt, breaking a hip.",1
"An employee fell from a job-made ladder while accessing the upper deck at a work site, suffering foot injuries.",1
"An employee was caulking the inside of a railcar when the doors closed on his upper legs, compressing them.",1
An employee and a coworker were lifting a trash cart to empty its contents inside a dumpster when the employee's left middle finger was caught between the metal dumpster and the trash cart. The employee's fingertip was amputated up to the nail bed.,0
"An employee slipped on a damp floor and fell backward, striking her head on the wall as she fell. She suffered a head contusion and was hospitalized.",1
An employee was breading a hopper machine when it fractured and de-gloved his right hand and forearm. The machine was unguarded at the time.,1
"An employee struck a metal storage rack while operating a standup lift, fracturing and lacerating the left ankle.",1
"An employee was dislodging a metal basket from a forklift using a chain. His finger was inside the end of the chain's hook when the forklift pulled the chain, catching and amputating his left index fingertip.",1
"A temporary employee tripped over a bundle of metal studs and fell onto the concrete floor, fracturing the femoral head bone.",1
An employee was standing on the forks of the forklift 2 feet in the air. He was lifting a steel grate when it fell back and caught his hand between the steel. He suffered torn hand ligaments and broken middle and ring fingers.,1
An employee's left middle and ring fingers were partially amputated by the knives on a cutter machine.,0
"Two employees were attempting to change the tire on an elevated trailer when a portion of the trailer broke apart and struck them. Both employees suffered head injuries. One was treated and released, while the other was hospitalized for treatment.",1
An employee slipped on ice in the parking lot and broke his hip.,1
An employee was directing a PIV operator moving materials. The material shifted and fell onto the employee breaking both legs. The PIV operator was not moving the materials at the time.,1
"An employee was moving boards when his finger was crushed between a board and a trailer frame, resulting in an amputation.",1
An employee fell down stairs and broke his wrists and fractured his skull.,1
"While on a ladder replacing a fiberglass boom in a mechanical tree trimmer, an employee was knocked off the ladder and fell to the ground. The employee suffered a fractured hip.",1
"An employee was moving pallets with a forklift when it became stuck in the mud. Two coworkers attempted to pull the forklift out of the mud by tying two straps of fastener together with a clevis and attaching it to a truck that was pulling the forklift. The clevis then broke and swung back, striking and lacerating the employee's head.",1
"An employee was exposed to carbon monoxide, suffering sickness and light-headedness.",1
An employee lost his grip on a sandblasting hose. The abrasive then struck and became embedded in his arm. He was hospitalized for surgery.,1
An employee was using a nail gun to package batteries when a nail shot into the employee's left hand.,1
An employee was removing chicken wing totes from beneath a wing separator. The employee reached up under the wing separator to retrieve a hanging chicken piece and contacted the separator. The employee's left middle fingertip was amputated above the nailbed.,1
An employee was delivering a forklift when part of it broke off at the weld and the forklift fell 3 feet. The employee then hit his head on the bar support for the roll-over protection and suffered a laceration that required hospitalization.,1
"On 1/19/2017, at approximately 1830, an employee was attempting to remove a die key from a steam-powered forging hammer when his leg became caught and injured between the key knocker ram and the hammer.",1
"An employee fell 10 feet from a fixed ladder while performing HVAC maintenance, suffering a lumbar fracture and head concussion.",1
"An employee was performing a roof inspection. He was taking photos when he slipped on wet shingles and fell into an empty concrete pool below, breaking his left arm and left ankle.",1
"An employee was bringing aerosol cans to room temperature when one of the cans ruptured and struck the employee's right cheek, causing a laceration.",1
"An employee was preparing to unload a truck mounted shipping container by activating the dock plate which is manually operated with a handle. While lowering the dock plate onto the back of the truck, the dock plate recoiled upon striking the right side of the truck causing the plate not to clear the truck as required to lay flat for unloading operations. The employee's left ring finger was pinched between the steel dock plate and left side steel edge of the dock plate.",0
"An employee was standing in an aisle, preparing to stock shelves, when he fainted, fell back, and hit his head.",1
"An employee was operating a punch press to punch holes in an aluminum door frame when his left middle finger was caught in a ram, amputating his fingertip. The ram was unguarded at the time.",0
An employee was operating a drilling machine when the clamp amputated the employee's right pinky finger. The clamp was guarded at the time.,1
An employee bent down to lift a chest of drawers when he experienced lower back and leg pain.,1
"An employee slipped and fell on a wet floor, fracturing her left femur and requiring hospitalization.",1
"An employee was lifting the dock plate with a hook. When the hook slipped, the employee fell backwards onto the concrete dock floor, fracturing his left hip.",1
"On January 19, 2017, an employee was operating an overhead crane to raise an 1,800-pound load. During the ascent, the load began to swing and pinched the employee's left thumb between a stationary object and the load. The employee's thumb was amputated.",0
"An employee was using a chisel, punch, and hammer to remove rivets from the frame of a train tender when the chisel flew loose and struck the employee's left eye, requiring surgery.",0
An employee was shot in the leg during an attempted robbery.,1
An employee was running a milling machine when a software glitch allowed the machine's clamp to close on and amputate the employee's fingertip.,0
"An employee was walking on a steel beam that was lying on the ground when it flipped over and pinned his leg between it and another beam. His right leg was fractured above the ankle, requiring hospitalization.",1
An employee was guiding a tractor trailer into an unloading area. The employee realized some pipes were hanging over the side of the trailer and moved behind and to the side of the truck to warn the driver to stop. The employee got caught between the trailer and a wall resulting in a broken left arm and two broken ribs.,1
An employee was on the roof removing snow when a fiberglass portion of the roof gave way and the employee fell 10 to 12 feet to the concrete floor below.,1
An employee was setting up a chicken house to receive new chickens. She turned and slipped on a powdered pesticide coating the concrete floor. Her right leg folded under her as she fell resulting in a broken lower leg.,1
An employee's right thumb tip was caught and amputated in a chuck saw.,0
An employee was working on a tractor alternator belt when a coworker started the engine. The employee's right second and third fingertips were then amputated by the moving belt.,0
"An employee was changing a pasteurizer system's probe, which was located on a pipe cap. When the cap was removed, the employee was sprayed with heated water.",1
"An employee was attempting to clean the focus eye lens in a trough that wood passes through on the lay-up assembly line. The machine started while the employee's right ring finger was in the strike area and a piece of wood crushed the finger, breaking it and causing the fingertip to burst.",1
An employee turned off a gang rip saw to clear debris from it with his left hand. The saw blades were still in motion and amputated his left fingers. The saw was unguarded at the time of the incident.,0
"An employee was pushing a container of hot asphalt on the roof when the asphalt splashed him, severely burning his face and neck.",1
An employee was cutting metal with a torch when slag entered the employee's boot and caused a burn. The burn became infected and required hospitalization.,1
"On 01/19/2017, at approximately 12:00 p.m., an employee was walking into the work site when she tripped and fell over the curb and into the doorframe. She caught the edge of the hinged door and then fell to the concrete floor, hitting her forehead and scalp, breaking her nose, and contusing her neck.",1
"An employee was helping to move a slab of granite when a forklift ran over his right foot, breaking three toes.",1
An employee was helping unload a compressor from a pallet when the compressor tilted and pinned the employee between the compressor and the ground. The employee suffered a broken right arm and his right ankle was crushed. The employee was hospitalized.,1
An employee was standing on a flat bed truck while a transformer was being loaded onto it with a sky lift. Outriggers were not used at the time. The sky lift tipped over and struck the employee on the head causing a laceration to the ear and abrasions to an arm and leg. The employee was hospitalized.,1
"While standing on a mezzanine platform, an employee opened a gate and was moving pallets for a powered industrial vehicle to retrieve when he fell out of the open gate to the ground, breaking his femur.",1
"An employee slipped on black ice while opening the lid of a dumpster. The employee's leg was caught beneath the dumpster, breaking the ankle.",1
An employee was walking in the manufacturing yard when he tripped on a rock and twisted/fractured his right ankle. He required hospitalization and surgery.,1
"An employee was using a shop vacuum to remove a liquid nylon blockage from a machine in the production area. Pressure had built up on the opposite side of the blockage, and as it was removed, the pressurized liquid nylon sprayed out striking the employee. He sustained second degree burns to the face and other burns to both hands and arms.",1
"An employee was carrying a bucket up a ladder to an 18-foot roof. The employee then stepped on plywood sheathing and slipped off the roof to the ground, suffering a broken tailbone.",1
An employee was leaning against the counter. When she turned around to walk towards the exit she lost her footing and fell backwards resulting in a contusion to the back of her head.,1
"A temporary employee was standing on the forks of a forklift, helping to move and load tile-making equipment onto a semi-trailer, when he fell off the forks. The forklift then ran over his right leg, requiring surgery.",1
An employee was working with a high-pressure processing machine and was trying to put the push arm back when the machine reset and caught the employee's finger between the sheet metal and the push arm. The employee suffered a contusion and amputation to the left ring fingertip.,0
"An employee fell to the same level while closing a door, breaking his hip and requiring hospitalization.",1
"An employee was driving a manlift onto a flatbed trailer when the manlift and employee fell off the side of the trailer. The employee suffered a broken femur and gash to the head and eye area, requiring hospitalization.",1
"An employee fell while exiting a tote loading cage, injuring the right hip.",1
"An employee was using a jib crane to lower a mold onto a carrier that had a bolt laying on top of it. When the employee attempted to pull the bolt from beneath the mold, it dropped down and smashed his left middle finger between the mold and carrier. His left middle fingertip was partially amputated.",0
"On 1/20/2017, an employee was climbing a ladder to disconnect a service line when the cable he hooked the ladder on snapped, causing him to fall and break six ribs.",1
"An employee fell while running through the parking lot, injuring his right knee and right shoulder.",1
"An employee was pumping a sewer truck into a below-ground holding tank when he fell into the tank, fracturing his hand and suffering a friction burn to his fingers.",1
"An employee was loading a 700- to 800-pound steel billet into a furnace when the billet became misaligned on the loading platform. As he attempted to straighten the billet with a pry bar, it rolled off the loading platform and onto his left foot, breaking bones and crushing toes.",1
"An employee was using a chop saw to cut aluminum metal when the guard became hung up. When he attempted to adjust the guard, his left hand contacted the blade, lacerating his thumb tip and fourth finger. The saw was running at the time of the incident.",1
An employee was operating the press. He sustained a de-gloving injury and a broken finger when his hand was caught between the clutch and the roll.,1
"The wiring for an argon oxygen decarburization (AOD) motor caught fire and the AOD had to be operated manually. An employee attempted to insert a crank handle into the AOD crank. As the employee was manually tilting the AOD, it moved beyond the center of gravity and the crank handle started spinning rapidly. When the employee tried to grab the crank handle, his right middle finger was caught in the chain and sprocket, de-gloving the fingertip. The chain and sprocket was unguarded at the time of the incident.",1
"An employee was removing a window pane on the third floor of a building when the window broke and the glass fell into the fold of the employee's arm, lacerating it and severing two veins.",1
"On 01/20/2017, and employee was descending a 10-foot step ladder when he tripped on the bottom rung and contacted the surface below, fracturing his tibia and fibula.",1
"While delivering mail to a box, an employee fell on an icy street and fractured the left tibia.",1
An employee was loading or unloading a tote on the back of a truck and descending the ladder when he slipped and fell on his back. He suffered broken ribs and cracked vertebrae.,1
The employee was walking on two stacked railroad ties to take a picture of aerial construction. The railroad ties shifted causing the employee to fall. A railroad tie rolled into his right leg and fractured it in three places.,1
"An employee was walking by a coworker when she tripped over his foot, fell on the floor, and landed on her side, fracturing her hip.",1
"An employee was tying rebar. As he disconnected his positioning hook to come off the rebar, he fell to the ground, breaking his arm and ribs and displacing a disc in his back.",1
An employee was placing a safety collar on the cylinder when the machine cycled crushing his right middle finger between the safety collar and the cylinder and causing a partial amputation.,0
An assailant used a screwdriver to stab an employee's eye and back in the parking lot. The employee was hospitalized overnight.,1
"On January 22, 2017, an employee fell and broke his hip. The employee was hospitalized.",1
"An employee was helping to direct a trackhoe in placing 30-foot concrete barriers on a roadway when a barrier fell on his left foot, partially amputating his pinky toe.",1
"An employee was changing the oil on a prentice machine. As the employee was descending the machine's steps, he slipped and hit his forehead and lacerated the back of his ear on the machine. The employee suffered a TIA (mini stroke) and was admitted to the hospital with slurred speech.",1
"On January 21, 2017, an employee was using a rag to clean grease off a printing press when the rag became caught in the machine. A moving part then pulled the employee's left index finger into the machine, amputating the fingertip. The machine was not locked/tagged out at the time.",0
"While stepping onto a joist on the second floor of a commercial construction site, an employee fell 13 feet to the ground below, fracturing the left pelvis and elbow.",1
"An employee was working with a flat automated calling system machine and over-the-road container when the container shifted, catching her left hand between the container and a dumper restrain bar. She suffered a left ring finger amputation and fracture.",0
"An employee was replacing sign panels on metal arches over a terminal access road overpass on a parkway. He was working from a boom lift parked at the median while the inside lanes were open to traffic in both directions and the outside lanes and shoulders were closed. An automobile truck carrier struck his boom lift, ejecting him from the basket. His harness/lanyard pulled him back, and he bounced off the basket and landed on the pavement below. He sustained a fractured femur, nine broken ribs, a broken collar bone, a punctured lung, and lacerations on the forehead and calf.",1
"An employee fell from a ladder while installing new HVAC units. The employee sustained a fractured skull and brain swelling, two fractured vertebrae, a displaced sternum, and fractured ribs.",1
An employee was exiting an office when the right index fingertip was caught and amputated by the closing door.,1
"An employee's right hand became caught in an electrical meat grinder, partially amputating the middle and ring fingers.",0
"An employee tripped over a coworker's foot and fell to the ground, suffering a broken hip.",1
"An employee was riding a three-wheeled bike when an axle broke and the employee fell, hitting a guardrail and fracturing his back. He was hospitalized.",1
"An employee was operating an extruding repalletizer. The line jammed and when he broke the line loose, his fingers were pulled into the machine resulting in the amputation of the left index and middle fingertips. The machine was energized at the time of the incident.",0
"An employee was standing on a high lift while a coworker was driving a forklift. The forklift struck the high lift and crushed the employee's right foot, fracturing it and causing severe trauma.",1
"On January 22, 2017, an employee was driving a skid steer in an outdoor yard area where bulk materials are staged. At approximately 8:40 p.m., he exited the skid steer cab as a coworker was backing up an agricultural tractor/trailer. The employee was then struck by the tractor/trailer unit, fracturing several bones in his right foot.",1
"An employee confronted a shoplifter attempting to steal liquor.  The employee retrieved the liquor and the shoplifter left the store.  Approximately 1.5 hours later, the shoplifter returned to the store, grocery side, and shot the employee three times - on the side of the head, in the left shoulder and on the left hand. The employee was hospitalized.",1
An employee was cutting open a case of ketchup with a box-cutting knife when the knife cut his left wrist.,1
An employee suffered a partial index finger amputation while servicing a wiring harness machine.,1
"An employee was walking up to the door of a patient's residence when she tripped and fell, breaking her tibia/fibula and dislocating her ankle.",1
An employee was operating a meat cutting band saw when the blade cut his left ring finger.,1
"As an employee was attempting to put a screen back on a spin dryer, he stepped into an opening on an auger and his leg was crushed/fractured by the auger.",1
An employee was using a reciprocating saw to cut into a wall made of drywall. The screws came loose on the access panel above the employee's head. The panel swung open and struck the employee on the head resulting in a head contusion and a concussion.,1
"An employee was installing form boards inside a confined space cell. While working inside the cell, a piece of pipe (bell reducer) approximately 7"" long, 8"" diameter, and weighing 55 pounds fell approximately 35 feet and landed on the employee. The employee suffered a neck fracture and a left hand metacarpal fracture with a complex laceration over the web space.",1
An employee was loading material onto the roof of a newly constructed home when he fell to the ground and fractured his elbow and hip. Fall protection was not worn at the time.,1
An employee was under a dock plate to change a spring when the dock plate slipped and pinned the employee beneath it. The employee was hospitalized with a back injury.,1
"While cleaning debris from a roof, an employee fell approximately 12 feet to the ground, breaking a rib.",1
"An employee was leaving work on 1/23/2017, slipped on the wet sidewalk, and fell striking her left knee on the curb. She was hospitalized for a broken knee.",1
An employee slipped on ice in the parking lot and fell striking their head on the pavement.,1
"An employee was entering the building when she slipped on wet tile and fell, fracturing her left hip.",1
"An employee was helping passengers load luggage when he tripped and fell forward, landing on and fracturing his right hip. He was hospitalized for surgery.",1
"An employee was operating a packer machine when he attempted to grab a piece of flex duct that was hanging from the back. His right index finger was caught and amputated by the machine, and his middle finger was cut.",0
"An employee on a scissor lift that had a manually extendible boom was replacing a furnace door. As he was maneuvering the door, he placed his left hand on the lift's top rail assembly, which consisted of a square tubing channel and a U-shaped channel. When he pushed the door against the lift, his left pinky was caught and amputated (above the knuckle) between the two channels.",0
"Employees were using an air hoist to remove the cover from a rotary transmission when the cover became stuck on a 5-gallon bucket. As an employee attempted to push the cover free from the bucket, the cover fell on top of his right arm. His right arm was trapped between the bucket and cover, crushing tissue and muscles. He then fell and fractured a bone in his left hand.",1
"An employee was at a residence to assemble some furniture. When he was walking to the house, he tripped on the concrete curb and hit his head/face. The employee lost some teeth and suffered contusions to face/head.",1
"An employee went to sit down in a wheeled chair when the chair slipped out from under her. She fell and hit her head, requiring hospitalization.",1
A temporary employee was operating an electric pallet jack and suffered a foot injury when stepping off the pallet jack before it had come to a complete stop.,1
"An employee was preparing a finished boat for shipment. He was placing a battery in the motor box when the lid of the box inadvertently closed and crushed his right big toe, amputating part of the bone.",0
"On January 23, 2017, an employee was stuck on the palm of his hand by a dental hook while collecting instruments to be sanitized. The employee was hospitalized.",1
An employee working from an aerial lift removing Christmas decorations received an electric shock from a possible arc flash. The employee received second and third degree burns.,1
"While helping to place mats on a basketball court, an employee tripped on a stack of mats and fell on a flashlight and the ground, breaking the right femur.",1
An employee was entering the plant through another building when a door closed on her right ring finger. The doctor diagnosed the injury as an amputation of the distal portion of her right ring finger.,0
"An employee was using a pipe threading machine to attach a four-way coupling onto a threaded steel pipe. The employee used a pipe wrench to hold the coupling in place. When the pipe wrench was released from the coupling, the foot pedal was engaged and the pipe wrench came down and crushed the employee's fingertip, amputating it.",0
An employee was working on a chain and sprocket conveyor when the machine restarted and amputated the distal tip of his left ring finger up to the first knuckle.,0
An employee was reaching for some keys on the wall in the shop area when his foot got caught in a cord and he fell breaking a hip.,1
"An employee was taking a water sample at the out cell. While holding a glass sample bottle, he slipped on the mud and fell. The bottle shattered and cut his left thumb including severed tendons.",1
An employee was operating a pallet jack and was pinned between the pallet jack and a pole when he stepped off the pallet jack and it continued to move forward. The employee was hospitalized with a fractured pelvis.,1
"At a staging area, an employee shoveling and spreading gravel began experiencing chest pains and shortness of breath.  He was hospitalized.",1
"While cleaning a track for a race, an employee lifted a bucket of snowmelt and suffered an abdominal hernia. He required hospitalization and surgery.",1
"An employee slipped and fell on ice or snow in the parking lot, fracturing his hip and one wrist and requiring hospitalization.",1
"While walking and holding a box, an employee tripped and fell to the floor, fracturing his right hip.",1
"An employee was dismantling an elevated platform after the completion of a production. The bolts were removed from a section. When the employee stepped on that section, the floor tipped and the employee fell 7.7 feet landing on his feet and rolling onto his back. The employee suffered bilateral fractures to the ankles and heels.",1
An employee was inspecting an aircraft engine while kneeling behind it. He put his hand on the rear part of a non-operating engine to pick himself up when the turbine spun and lacerated his gloved left hand between his ring and little finger.,1
An employee was standing and talking to a co-worker. As she turned to walk away her foot got caught on a chair causing her to fall onto her left side and break the left hip.,1
The employee was operating a mill machine to put flats on round bar stock. The employee reached behind the stock to check on a radius and was caught between the bit and the stock amputating the right index fingertip.,0
An employee was walking in the aisle when the drive motor of a press came apart while running at a high speed and a piece flew off and struck the passing employee in the head. The employee was hospitalized.,1
"An employee was climbing a scaffold to access the building's roof. As the employee was crossing the walk boards to get to the roof, the employee fell 12-14 feet to the ground resulting in broken ribs and a neck injury.",1
"On January 24, 2017, at approximately 2:13 p.m., an employee was injured while operating a chicken pressure fryer. The lid to the cooker was closed, but did not latch. Approximately 5 minutes into the cooking cycle, the pressure inside the cooker caused the lid to open and grease, heated to 350 degrees, splattered on two employees. The first employee was hospitalized for second degree burns to her back and neck. The second employee was treated for first degree burns to his back and was released.",1
An employee suffered a partial finger amputation when the wind blew an exterior door closed onto the employee's hand.,1
"The employee was driving a loaded garbage truck to the landfill for dumping. As the employee entered the landfill, he rounded a corner and the garbage truck rolled onto its side. The employee fell from the truck and fractured ribs. The employee was hospitalized.",1
"An employee was standing near a truck while another employee was loading the truck using an electric pallet jack. As the employee was driving the electric pallet jack off of the truck and onto the dock, one of its wheels hit some moisture which caused it to skid and strike the other employee's lower right leg fracturing it in two places.",1
An employee suffered a heart attack after shoveling snow and salting the sidewalk and was hospitalized.,1
An employee was standing on a handrail to tighten a screw on a linen chute. The employee fell and was injured.,1
An employee was unloading material from a flatbed truck and fell from a ladder resulting in three broken ribs and a punctured lung.,1
An employee was unloading a bundle of flat bar iron from a truck using an overhead crane. The bundle became unstable and the material shifted and struck the employee on the head.,1
An employee fell approximately 15-20 feet off a bridge and was hospitalized.,1
"On 1/24/2017, an employee was dismounting an excavator when his safety vest got caught on one of the levers. The lever engaged and caused the bucket to drop on a second employee who was standing close to the excavator and crushed both of his ankles.",1
An employee was trying to hang a part on the paint line while standing on a platform approximately 2 feet high. The employee got dizzy and fell on the concrete floor fracturing his left femur.,1
An employee was operating a slitter machine and caught his right arm in a pinch point causing a severe laceration.,1
An employee slipped on snow/ice and fell in the parking lot resulting in a fractured left ankle requiring in-patient hospitalization.,1
"An employee was walking toward a washer with laundry, slipped on a broken tile, and fell breaking the right wrist.",1
An employee was checking the fried pie line when he felt dizzy and his hand got caught in the pie line rollers. The employee's fingers were degloved.,1
"A driver was trying to tighten a washout cap on a cargo tank trailer when the washout cap blew off and startled him. He fell off the trailer and broke his right femur, separated his left shoulder and sustained a spleen injury.",1
An employee was pouring molten metal. The molten metal splashed onto and burned another employee that was standing nearby.,1
"An employee reached into a 40-ton press to remove a part from the die. The press malfunctioned due to the ""dogs"" breaking and the press tripped and crushed the employee's left hand. Four fingers were amputated.",1
An employee fell 9 feet from a catwalk while helping to move a boat. The employee sustained a fractured leg and a bruised arm and nose.,1
An employee was picking up steel bars in the holding area to move to another area.  The bars were strapped on one end where his hand was and one of the bars moved pinching his right pinky finger resulting in a split of the fingernail to the bone.,1
"An employee was stepping down from a four-step stand, missed the second step and fell to the hangar floor breaking his left femur.",1
An employee was transporting a scaffold section from the hall of a school under construction to a bathroom to begin masonry work. The employee had his hand against the wall as he was waiting to erect the scaffold. Another employee slid a section of the scaffold down to the injured employee. At that point the section slid down and amputated the employee's left pinky fingertip.,0
An employee was plowing and shoveling snow and suffered shortness of breath and chest pain.,1
An employee was assisting another worker with transporting bricks to complete the job. The employee was climbing down from the scaffold when he slipped on one of the railings and fell approximately six feet striking another piece of the scaffold during the fall. The employee was hospitalized with a broken leg.,1
"An employee was walking in the front door, tripped, and fell resulting in injury to her left side and elbow.",1
An employee was lifting boxes and suffered a muscle strain/sprain/tear in his lower abdominal muscles.,1
An employee was struck by bullets from a drive-by shooting while conducting business at a residence.,1
"The injured employee was driving a 4-wheeled ATV transporting materials and while passing another ATV, steered the ATV to the right. The ATV's right-side wheels rolled onto a parked Bobcat. The ATV tipped over and the employee grabbed on to the left rail bar. When the ATV fell, it crushed the employee's left hand.",1
An employee tripped and fell fracturing a hip.,1
Employees were replacing an estimated 250-pound lid on a pump using lifting equipment. The lid came loose and struck an employee on the right calf. The employee was hospitalized for a contusion and abrasion on the right calf.,1
An employee was installing protective corners on the load of a flatbed trailer and fell off the trailer breaking both ankles.,1
An employee was climbing a ladder and fell approximately 4 feet fracturing an ankle that required surgery and hospitalization.,1
"An employee was walking to their car in the parking garage, slipped on the painted lines and fell. The employee was hospitalized for a head injury.",1
"An employee was working at the centerfire priming area removing or cleaning excess primers out of the primer bowl when the primers exploded and the employee suffered multiple injuries including first degree burns and abrasions to the forearms, chest, and face. The employee was hospitalized.",1
Two employees were working behind the counter and bumped into each other. One employee fell and fractured her pelvis.,1
An employee was demonstrating the metal bender to another employee when their glove was caught between two rollers resulting in the partial amputation of the left index finger.,0
"On 1/25/2017 at 12:07 PM, an employee was stocking goods in a movie theater.  While moving cases of water bottles, two at a time, his back gave out and the employee fell to the floor. The employee was admitted to the hospital for a back injury.",1
"An employee was coming down a straight ladder, missed a rung and fell less than two feet fracturing a knee cap.",1
An employee was installing a lining in a pipe that was operating when the inverter blew up and a piece of equipment struck the employee's face.,1
"An employee was assisting in moving a portable truck scale when the load shifted, fell approximately 10 feet, and caught the employee's left-hand fingers between the cribbing and the asphalt resulting in three fingertip amputations and fractures.",0
An employee fell while replacing a service drop and suffered broken bones.,1
An employee was taking measurements of the sub-station when an arc flash occurred and burned the back of the employee's left hand to his wrist.,1
An employee was operating a table saw and amputated the left index and middle fingers.,1
An employee was relocating sprinklers above the ceiling and was shocked by live wires resulting in hospitalization.,1
An employee was climbing a ladder to access the blower motor. The employee was standing on the fourth rung when their right hand came in contact with the running pulley belt resulting in amputation of the right middle fingertip.,0
"On January 25, 2017, an employee fell 16 feet off a metal ladder that was fixed to the side of the de-stat booth on a paint line. The employee broke both wrists and sustained a spinal injury.",1
"An employee was walking through a door with a ladder when the wind caught the door and slammed it closed on the employee's left ring finger, resulting in amputation at the first joint.",0
"Two employees were performing maintenance on an electrical generator. While one employee was making adjustments to the generator's fuel system, the other employee amputated his left index finger at the knuckle.",1
"On January 25, 2017, at approximately 3:00 a.m., a driver was injured after falling three feet from a fixed ladder on a tank wagon fuel truck resulting in a back injury requiring surgery.",1
"An employee was walking from the floral department to the produce department, slipped, and fell breaking the right knee.",1
An employee was conducting product inventory from an eight-foot step ladder and fell resulting in a fracture to the T11 vertebra and a rib. The employee was hospitalized.,1
An employee was walking down a set of stairs when they missed a step and fell fracturing the right ankle.,1
"An employee was walking to their car in the parking lot, slipped on ice and fell fracturing a hip.",1
"On January 25, 2017, at around 9:30 a.m., employee 1 was operating a Skyjack Telehandler forklift with a telescopic boom and outriggers on the front. Employee 2 attached a nylon choker midway down a steel pipe that was 40 feet long and 10.75 inches in diameter. Employee 2 then attached the other end of the checker to a hook located under the boom of the forklift just behind the forks. Employee 1 lifted the steel pipe and carried it to an area where there were existing above ground steel supports. The designated area was muddy and wet. Employee 1 put the outriggers down and extended the boom approximately 40 feet and placed the steel pipe down onto the steel supports.  Employee 2 was removing one end of the checker from the hook on the bottom of the forklift boom that was about 10 inches above the steel pipe, when the telescopic boom came down on top of the employee's right hand that was on top of the steel pipe resulting in fractures and lacerations to his fingers.",1
"An employee was getting up from her chair when her foot got caught in the wires under the desk and she fell, fracturing the left hip.",1
An employee engaged in bead building activities had their right ring fingertip amputated when it was caught in a pinch point on the bead wire spool.,0
"An employee was threading paper into the hot plate section of the running corrugator. The employee's gloved left hand was pulled into the nip point, trapping his hand/arm between the corrugator belt and the hot plates resulting in burns to the employee's arm and hand.",1
"An employee was walking out of the plastic press, tripped and fell on corrugated steel (part of the platform) lacerating the right elbow and forearm.",1
"An employee was walking to their car in the parking lot at the end of shift, slipped on ice, and fell breaking their right leg or ankle.",1
An employee was shot in the right shoulder by two armed robbers.,1
"An employee was stocking the back store room shelves using a mobile stair ladder. As she descended the ladder, the employee lost her footing and fell breaking her right knee.",1
"An employee was walking down a hallway and fell striking her head on the tile floor. The employee suffered a head laceration, a fractured elbow and a fractured finger.",1
An employee was on a ladder to clean the top of a spray booth. The ladder slid out from under the employee and he fell 5-6 feet to the floor resulting in a broken left femur.,1
"An employee was inspecting a water heater in the attic of a residence and fell 8 feet when the ladder gave way, landing on his back.",1
The injured employee was standing at the edge of an excavation when an excavator hit a natural gas line while digging resulting in a fire. The injured employee suffered first degree burns to the lower right arm and thigh.,1
An employee was cutting wood profile samples when his finger was caught under a pneumatic guiding/clamping tool resulting in a partial fingertip amputation.,0
An employee was behind the dump truck trying to pull the dump gate up in order to drop it back against the truck and loosen gravel. The truck driver lowered the truck bed and the dump gate crushed the employee's right ring finger.,1
An employee was  adjusting the tension of a saw belt. The saw was locked out. The employee manually rotated the pulley and caught his right thumb in the belt amputating the tip.,0
"An employee was driving a flatbed delivery truck loaded with construction materials (e.g. lumber) to a residential construction job site.  The employee drove into the respective subdivision and past his destination.  The employee stopped on the roadway, place the vehicle in reverse, and attempted to drive back to the destination. The vehicle stalled and the employee jumped from the cab of the moving vehicle resulting in a broken ankle.",1
The employee was closing the main cabin door of a twin-engine jet airliner and caught their fingers between the door and the handle fracturing the third and fourth digits on the left hand.,1
An employee was operating the pop up saw and amputated the right middle fingertip.,0
An employee was in a man basket spooling wire rope using a chain. The employee's hand was on the rope when the chain moved and caught his right thumb resulting in an amputation of the thumb tip.,1
An employee was sitting a the desk when a co-worker applied lotion. The employee immediately started coughing and suffered a bronchial spasm.  The employee was hospitalized.,1
An employee was loading a part into the press when it fell on the employee's leg and fractured the ankle.,1
"On 1/26/17 at approximately 3:15 PM, an employee was working on a tractor supported by jacks when the tractor slipped off the jacks and pinned his hand between the impact wrench he was using and the floor, amputating four fingers on his right hand.",1
An employee was struck by a pallet on a forklift that was being operated in the area where he was working. The employee sustained a fractured pelvis.,1
An employee was hospitalized for electric shock when the ladder he was carrying touched the power line.,1
"An employee was moving totes of sulfuric acid with a forklift when a tote was accidentally punctured, causing the acid to spray out and burn the employee's neck, face, and chest.",1
An employee was using a high pressure hose to wash a conveyor belt. His smock got caught in a sprocket on the machine resulting in an upper right arm fracture.,1
An employee was walking through the kitchen and fell dislocating his femur at the knee that required surgery.,1
An employee was working on the motor of the scrap out conveyor when his glove was caught in the chain amputating the right index finger.,0
"An employee was dismantling a furnace scraper when a part of the scraper weighing approximately 40,000 lbs. fell on his right foot amputating multiple toes.",1
An employee was moving product with a forklift and collided with a pallet jack bruising an ankle.,1
An employee was riding a horse in the cattle pen. The horse slipped in the mud and fell on the rider. The employee suffered a fractured leg.,1
An employee was manually lifting a roll of fabric material with a metal pole. The employee placed the pole into its holder and pinched their left index finger resulting in a partial amputation.,0
"An employee was attaching a chain to the bucket of the backhoe to remove the shoring box from the bed of the supply truck when he fell backwards over the side of the truck. The employee sustained right shoulder, back, and left leg injuries.",1
An employee was unloading metal beams when their left hand was caught between two beams. The employee suffered a severe laceration that resulted in medical amputation.,0
"An employee was pushing fish tape through a pipe. The fish tape fell from the employee's hands and onto an energized buss/switchgear creating an arc flash. The employee suffered burns to the face, arm and hand.",1
"An employee was operating a press and encountered a problem with the machine. The machine was powered down to adjust the hardness wheel. When the machine was powered back up, the employee's left index and pinky fingers were amputated.",1
An employee was welding on a stainless foundation and received first to second degree burns under the right arm pit and shoulder area when his shirt caught fire.,1
"An employee unlatched a trailer ramp to let water drain from the trailer after washing it. When the employee attempted to put the ramp back into position to latch it back up, the ramp fell on the employee's arm and fractured it.",1
An employee was climbing the ladder on the trailer to install a tarp. The employee fell from the ladder and fractured the right hip.,1
An employee was taking trash to the dumpster and suffered a laceration to the right index finger resulting in hospitalization and surgery.,1
An employee was ascending a scaffold ladder when his foot got caught in a rung and he fell backwards. A co-worker came to his aid and freed him. While descending the remaining scaffold he slipped and fell approximately four feet to the pavement. The employee was hospitalized for a head injury.,1
An employee was riding an ATV and fell off the ATV while going around a curve in the road. The employee sustained a fractured arm.,1
"An employee was on a forklift moving bales of carpet. As the employee was moving the bales, the carpet in the back row shifted, causing the bales in the front to fall. The employee jumped off the forklift and as he was running a bale hit him from behind. The employee sustained a fractured right leg, a fractured left fibula, a fractured L3 vertebra, and foreign bodies in left ankle.",1
An employee amputated the left pinky fingertip with a shaper machine.,0
An employee was climbing a fixed ladder to go from one roof section to an upper roof section and missed the top rung. The employee fell 14 feet to the lower roof and hit his head. The employee suffered cracked ribs and a lung contusion. The fixed ladder had a cage around it.,1
"An employee was sitting in a chair in a patient's room. As she stood up, her foot caught the bed side table. She lost her balance and fell backwards resulting in a fractured right femur.",1
"On January 26, 2017, an employee was operating the roll forming machine. The employee's shirt sleeve was caught in the machine pulling his right hand and wrist into the machine resulting in a crushing, bruising, internal bleeding, and swelling injury.  The machine was guarded at the time of the incident.",1
"On January 26, 2017, at approximately 12:45 PM, an employee was injured while pulling crates of milk from the energized floor track. A stack of product cases became hung up on the floor track. Using a metal hook, the employee attempted to unjam the cases. The track popped up and caught the employee's left ankle between the track and the metal side barrier on the track resulting in a broken ankle. The employee was hospitalized for surgery.",1
An employee was delivering mail and slipped on a residential porch fracturing an ankle.,1
"On January 26, 2017, at 3:00 PM, an employee was performing his rounds such as checking the hide conveyor for fats and paper towel build up to prevent a future problem. The conveyor was running and one of the hooks caught the employee's right arm tearing some of the muscle tissue from the arm. He was hospitalized where he had several surgeries due to E. Coli from the hide conveyor.",1
An employee was walking through the mechanical room and struck his head on a pipe. The employee was hospitalized for a concussion.,1
An employee was observing a switch operation during troubleshooting and got a finger caught in the motor belt resulting in two fingertip amputations.,0
"An employee was walking in the work area, tripped and fell breaking the left hip.",1
An employee walked out the back door to the common area and while going down the three stairs he tripped on the third step and fell breaking his left hip. The employee was hospitalized.,1
An employee was operating a horizontal milling machine when his right arm was caught by the spindle blade and severely lacerated. The employee was hospitalized.,1
"An employee tripped on rope on the floor and fell, breaking his right femur.",1
"An employee was working at a customer location and slipped while going down the rear, concrete steps and injured his right knee.",1
An employee was using ammonium hydroxide with water to test a product for lead when he was exposed to potassium cyanide. The employee was hospitalized for cyanide poisoning.,1
A worker was struck by a moving trailer in the receiving area resulting in a broken leg.,1
An employee was discharging pipe from the vessel located in the hatch of the vessel. He approached a bundle of steel pipe that had just been lifted by a crane. The crane lifts the load high enough for workers to put a strap under the pipe. When the employee approached to throw the strap he stepped on another loose bundle of pipe that rolled onto his left ankle and broke it. He was hospitalized.,1
An employee was lining up pipes to be connected when the clamp that holds the pipes together broke and the employee's left index finger was caught in the lifting chains amputating it at the first knuckle.,0
An employee was installing a curtain wall and fell through a hole in the floor breaking the right femur and the right arm.,1
An employee was operating a punch press and amputated the left middle finger.,1
"On January 27, 2017, at 9:45 a.m. an employee was attempting to reposition the upper of two loaded Ropak pallets in the Pack Area to gain visual access to the shipping label on the pallet for inventory purposes. The employee's left pinky finger became caught between the two pallets resulting in a partial amputation.",0
An employee was working from a ladder and fell approximately four feet injuring his back.,1
An employee was cleaning a H2S (hydrogen sulfide) tower using a H2O2 (hydrogen peroxide) chemical when a chemical explosion occurred. The employee suffered burns to an ear and leg.,1
"An employee was moving a transport dolly loaded with approximately 200 pounds of sheet metal. As he was turning the dolly, his right pinky finger got caught between a stationary table and the dolly handle resulting in the amputation of his right pinky fingertip without bone loss.",0
"An employee fell approximately 15 feet through a skylight and sustained broken legs, feet, and ankle. The employee was not connected to his lifeline at the time.",1
"An employee was replacing a concrete discharge boot from atop a front end loader. While tightening a bolt, the wrench slipped and the employee lost his balance and fell approximately 10 feet.  The employee struck the hood of the loader and fractured ribs.",1
An employee was kicking garbage to clear an area and struck a solid object under the garbage resulting in the dislocation of the right knee requiring hospitalization.,1
An employee working inside a trench was struck by the bucket of an excavator fracturing his hip.,1
An employee sustained an amputation on his left hand while operating a metal servicing machine.,1
An employee was assisting a patient and suffered a strain injury to her leg. The employee was hospitalized with a blood clot.,1
An employee was driving an ATV spraying vegetation control around a pond on a golf course when the ATV flipped on its side and the employee fell off.  The employee sustained a back injury requiring surgery.,1
An employee was cutting a piece of metal on a hydraulic shear and crushed his right index finger in the shear's hold down.,1
"An employee was installing a cooling tower over a pit when he fell approximately 12 feet into the pit, suffering bruising. Fall protection was not worn at the time.",1
An employee was cutting meat with a bone in a saw. The meat rolled and the employee's right middle finger contacted the saw blade and was amputated.,1
"An employee was assisting with the assembly of an 800-ton hydraulic crane and was preparing to secure the cable bridle to the base section of the luffing jib. The employee was holding the cable with his left hand as it was being pulled through the sheave. The employee's glove and left hand got caught and pulled into the sheave.  As it caught his glove, he pulled his fingers out and suffered the amputation of the left index fingertip, a severe laceration and a minor fracture to the left middle fingertip and a contusion and minor fracture to the left ring fingertip.",1
An employee was performing decking work and fell approximately 30 feet while moving from one work area to another. The employee suffered broken facial bones. The employee was wearing fall protection at the time.,1
"An employee was changing out a motor on a drag conveyor. Lock out/tag out was removed and power restored to check rotation. When the motor started, the employee's fingers were pulled into the chain and gear box amputating the left index and middle fingertips. The left ring finger sustained a laceration requiring stitches.",0
"An employee was handing out food samples at the store, fainted and fell to the floor fracturing an ankle.",1
An employee moving meat on a conveyor amputated her left middle finger.,0
An employee was retrieving documents from a safe and closed their left pinky finger in the safe door resulting in a fingertip amputation.,0
An employee was trying to stabilize a leaning stacked pallet. He climbed the nearby roof access stairs and was reaching to straighten the pallet when he fell over the stair railing about 10 feet and landed on his back on the floor below. The employee was hospitalized for surgery to repair fractures to his back.,1
"A temporary employee was riding in a track mobile that moves rail cars. While dismounting the moving track mobile, the employee's leg became pinned between the track mobile and a stationary pole.  The employee was hospitalized for a broken leg that required surgery.",1
"An employee was erecting the second tier of a masonry scaffold when he fell approximately 10 feet to the ground below breaking the L1, L4 and L5 vertebrae. The employee was hospitalized.",1
An employee was working on the second step of a six-foot ladder in the backroom sorting through hardware bins. The employee began to come down the ladder and missed the last rung. The employee fell and broke the left hip.,1
An employee was assisting a forklift driver stacking freight. The lifting straps broke and the freight fell on the employee's foot.,1
An employee was about 13' up a cell tower in a spider basket taking steel off of the tower for new reinforcement. The employee fell and sustained lower back fractures. The employee was not tied off at the time.,1
An employee's hand was caught between a conveyor belt and a roller.,1
An employee was operating an electric pallet jack to transport pallets of food when the employee was caught between the pallet jack and a metal warehouse rack post. The employee sustained lacerations to his left leg near the knee.,1
"An employee slipped on food and fell in a patient's room, fracturing their back.",1
"An employee was walking on the beam portion of the pumping unit attempting to guide the ""horse's head"" into position when the ""horses-head"" moved unexpectedly and struck the employee's right foot resulting in a fracture and laceration to the foot.",1
An employee tapping in a set of electrical cables into the secondary side of a pad mounted transformer received second and third degree burns to the face when an arc flash occurred.,1
"An employee was operating a powered industrial truck (PIT) and removing a stack of pallets from a trailer. While exiting the trailer, the rear of the trailer dipped increasing the distance between the dock plate and the trailer floor.  This caused the PIT to land in the dock pit and the employee was thrown from the PIT. The employee suffered three broken ribs and a bruised liver.",1
An employee was walking down the stairs in a building when the stairs collapsed and he fell from the third to the first floor landing on his left side and injuring his wrist and back.,1
An employee was slipping new drilling line when his right hand got caught in the sheave resulting in the amputation of four fingers. The thumb was not affected.,0
An employee was unloading fiberglass camper shells from a curtain sided semi trailer using a forklift when he fell and struck his head on the pavement.,1
"An employee was waiting at the gate that leads to the press loader. His right foot was underneath the gate and his right toe was hanging over the edge of the pit. When the press loader step indexed down, his right foot got caught between the press loader step and the edge of the pit resulting in a crushing injury to his right toe. The tip of the toe was surgically amputated.",1
An employee was cleaning the inside of tank with a pressure washer and contacted his left foot with the pressurized water blast. It cut through the top of his safety shoe and caused a one inch cut to the left foot behind the big toe area.  The employee was hospitalized.,1
An employee was at a truck wash location and fell and hit his head.,1
An employee was using a wrench to loosen a nut. The wrench slipped resulting in the amputation of the left thumb tip.,0
An employee was approximately four rungs up on an 8-foot A-frame ladder when he slipped while trying to tighten bolts on a steel structure and fell breaking the right ankle.,1
An employee climbed onto the bed of the truck to retrieve a 2x4 off of the rack and fell approximately five feet to the ground.  The employee suffered multiple left wrist fractures and a head laceration.,1
An employee was struck by a fork truck as it backed up resulting in a head and foot injury.,1
An employee was sitting in her office when a recently terminated employee came into the office and attacked her. The employee received injuries to the head and face.,1
"An employee was carrying a pan of hot water and walking through a doorway when another employee entered through the doorway, knocking the pan to the floor and spilling hot water onto the employee's feet.",1
An employee was performing maintenance on equipment when a spring broke and a piece struck the employee's face causing a laceration.,1
"An employee was operating a drill station while wearing gloves. The glove got caught in the drill, drawing the employee's left hand into the equipment and causing an injury to the thumb that may require amputation. The employee was hospitalized.",1
An employee was repairing wires going to the head switch and grabbed hold of a live wire resulting in electrical burns to both hands.,1
An employee was using a coping grinder to grind a piece of flat bar. The flat bar gave way and the employee's hand was caught in the machine amputating the left little finger to the second knuckle.,0
An employee was operating a vertical wrapper and amputated the left middle fingertip.,0
"An employee was operating a truck and fell while descending the ladder backwards (i.e., while facing away from the ladder) sustaining face and back injuries.",1
An employee was operating a lift and was pinned between the rail and the lift injuring his left toe.,1
"While stocking product, an employee tripped over a pallet and fell injuring a hip.",1
An employee was standing beside his truck while a truck next to him was emptying a roll-off container. The door of the roll-off container opened and struck the employee on the lower back. The employee was hospitalized.,1
"An employee was walking out of the building, slipped on ice and fell. The employee sustained a head/neck injury and a concussion.",1
"An employee delivered a load to a customer and was unloading the cargo when he was struck in the head with the forks of a forklift. The employee was wearing a hard hat. The employee sustained multiple skull fractures, five staples in the face, and short-term memory loss.",1
An employee was checking the rice bagging machine when his hand was caught in the jaws of the machine severing the left index finger at the first joint.,0
"An employee was pouring hot fryer oil into the fryer oil bin when he slipped on oil on the floor and spilled hot oil onto himself. He received second degree burns to his arms, legs, stomach and part of his face.",1
An employee was removing product from a shipping stack when her foot got tangled in the string that holds the stack together causing her to fall and fracture the right hip.,1
"An employee was walking in the parking lot, slipped on ice and fell breaking the right tibia and fibula.",1
An employee was walking across the yard when he slipped on ice/snow and fell to the ground. The employee broke his left hip and was hospitalized.,1
An employee was on top of the semi-truck unloading steel joists when the load shifted and struck the employee. The employee fell and hit his head on a concrete block.,1
"An employee was conducting well maintenance when the flow line (two inch steel pipe) snapped and struck the employee in the head, back and pelvic areas. The employee then fell approximately three feet sustaining a head laceration. The employee was hospitalized.",1
"An employee was removing a steel cross brace from a steel I beam. The crane hook was not centered over the brace and when the brace came free, it struck the employee in the leg and head. The employee suffered a leg contusion and was hospitalized for blood clots that developed in his leg.",1
"An employee was a passenger on a baggage tractor traveling from one gate to another. When the tractor made a left turn, the employee fell off. The employee sustained a left knee fracture and a right shoulder dislocation.",1
An employee slipped on ice while walking across the parking lot and fell fracturing their skull and ribs.,1
An employee was burned by hot water.,1
An employee was walking across the parking lot on her way to work when she slipped on snow/ice and fell breaking an ankle.,1
An employee was operating a gas powered saw and lacerated his left leg from the top of the left foot to just below the knee area. The employee was hospitalized for surgery.,1
An employee suffered a double finger amputation injury to his right hand when he contacted the table saw blade in an attempt to dislodge a jammed board.,0
An employee was attempting to clear a jammed component from a machine and amputated the left ring and middle fingertips.,1
An employee was hospitalized after being struck by the stretcher.,1
An employee was operating the shaper that bevels the edges of small pieces angled to fit into a garage door and contacted the shaper blade amputating a fingertip.,0
An employee had been working on a lower-sloped porch roof and was preparing to get off the roof to have lunch when he noticed a four-foot level was getting close to the edge of the roof. The employee reached for the level and slipped on snow or ice or some other moisture and then fell off the roof approximately ten feet to the ground. The employee was hospitalized for a head injury.,1
"An employee fell approximately 15 feet from the roof while working. The employee suffered a broken collar bone, broken ribs, a collapsed lung and a concussion. The employee was not using fall protection at the time.",1
An employee was painting from a ladder when the ladder shifted and the employee fell breaking a femur.,1
An employee fell 10 feet to the ground while working from a ladder. The employee fractured his left wrist.,1
"An employee was assisting in rigging up and rigging down when their left hand was caught between the blow out preventer (BOP) and elevators. The employee sustained lacerations, contusions and fractures to their hand.",1
An employee was standing on a small step while working on a vehicle that was up on a lift. He lost his balance and fell backwards hitting a transmission jack when he fell. The employee suffered broken ribs and a punctured lung.,1
While performing pump maintenance an employee's right hand was caught in the pump area and crushed.,1
"On January 31, 2017, an employee was removing teeth from a core barrel that was used to drill a 30-inch diameter eight-foot deep hole. The employee was facing towards the hole when he was witnessed as experiencing seizure type symptoms. The employee turned around and looked upwards. The employee then backed up and fell into the hole. The employee suffered a broken neck.",1
An employee was working underneath a trailer trying to remove a wheel with an air gun. The air pressure released causing the gun to jolt and catch the employee's hand between the floor and the bottom of the gun. The employee's right pinky finger was broken and the employee was hospitalized.,1
An employee amputated his index fingertip on a band saw.,0
An employee was changing a tire on an industrial floor sweeper when the tire jack he was utilizing collapsed. Three fingers on his left hand were crushed.,1
An employee was inspecting a crane and the load was set down on the employee's hand during the inspection resulting in amputation of three fingers.,1
An employee was cleaning a chain and sprocket assembly on a laundry folding machine when his glove was pulled in between the chain and sprocket resulting in a partial amputation of the right index finger. The machine was not locked out/tagged out at the time.,1
An employee was walking into work when she either tripped on a curb or walked into a hole in the grass and fell. The employee broke her humerus bone and was admitted to the hospital for surgery.,1
An employee was restraining a patient when the patient sat on his left leg and fractured the tibia and fibula.,1
A temporary employee was resting on top of the depucker machine guard housing while bottles passed by on the conveyor belt. She braced her left hand underneath the machine's conveyor belt guard to push herself back up to a standing position when her left hand made contact with the moving conveyor belt resulting in the amputation of the first joint of her left index and ring fingers. She was hospitalized.,1
An employee was walking up a ramp to go inside a building and fell off the ramp shattering his elbow.,1
"The employee was switching trailers. While climbing into the trailer, the employee tripped over something and fell backwards out of the truck injuring his right elbow.",1
An employee was operating a metal sheet roller when a glove got caught in a roller amputating the left index fingertip.,0
On 1/31/2017 an employee was cleaning out an auger. Tension on the auger was released when the debris was cleared and the blade lacerated the employee's hand.,1
An employee was walking on a railroad swing bridge platform carrying a wrench when he lost balance and stepped between bridge ties injuring his knee.,1
"An employee was cutting carbon steel metal on a lathe machine. A metal shaving from the cut coiled up and fell into the tee, a fitting used to connect pipe. The material is on a rotating part. A portion of the metal shaving was pushed out of the tee and struck the employee's upper leg above the knee and lacerated it.",1
An employee slipped on ice in the parking lot and fell fracturing a hip.,1
An employee was installing a life ring at the entrance of the floating dock. The dock had become misaligned and off level on the rocks after a recent Nor'easter. A 2x4x8 foot piece of lumber was used to pry up the anchored side of the dock. The lumber snapped and the employee's right thumb was pinched between the lumber and a rock resulting in a partial amputation of the right thumb tip including the nail.,0
"An employee was climbing the ladder on a ready mix truck, slipped and fell to the ground fracturing the lower right leg.",1
An employee was carrying a pot of boiling water and splashed the boiling water on herself resulting in severe burns to the left forearm.,1
An employee fell into a tank that contained 180 degree Fahrenheit water while removing an aluminum extrusion from the tank.,1
"On 2/1/17, an employee was operating the printing press when his left hand was pulled into a pinch point. The employee was hospitalized due to his injury.",1
An employee was cleaning an airless sprayer and pressed the trigger while his finger was at the nozzle and the sprayer contents were injected into his right index finger.,1
"As an employee was walking from her truck to the building, she slipped on ice and struck her head on the ground resulting in a head injury requiring hospitalization.",1
An employee was walking outside to service a recycling bin when he slipped on ice and broke his left hip.,1
An employee was walking in the basement where hot stock had overflowed and floated a grate up off the drain. The employee stepped into the uncovered drain hole and suffered second degree burns to the left leg and foot.,1
An employee was operating a shear machine and amputated the left middle fingertip.,0
"An employee was testing out a bicycle after repairing/assembling it, hit a patch of ice on the north side of the store, and fell off the bicycle fracturing the left hip.",1
"An employee was stocking the shelves. While descending the cart ladder, the employee missed the bottom rung and fell breaking the left hip and wrist.",1
"An employee was pulling painting materials up onto the roof with a rope. He tripped on a skylight and fell through it to the first floor. The employee suffered lacerations, contusions and possible broken bones.",1
An employee was operating the boring mill and amputated the left ring finger at the first knuckle.,0
An employee was walking between golf carts in the cart barn when he tripped and fell fracturing his left hip.,1
An employee fell approximately 16 feet through an elevator shaft resulting in broken ribs and a punctured or collapsed lung.,1
An employee was inspecting the door to a interior idle tray dryer when the door fell off the hinges and onto his foot.,1
"On February 1, 2017, an employee was using a vacuum cleaner and the plug came out of the outlet. When it was reinserted into the outlet, the employee received an electric shock. The vacuum was not turned off at the time. The employee was hospitalized.",1
"An employee fell approximately 10 feet while descending a ladder from the roof of a residence. The employee sustained four fractured vertebrae, a fractured wrist and a cut on his head.",1
"Two employees were pulling apart two entangled step stools when one employee fell backward, fracturing her L2 vertebra.",1
An employee was operating a punch press and crushed a finger in the point of operation resulting in a partial amputation to the right index fingertip.,0
"An employee was draining hot cooking oil from three deep fryers. When the hot oil was placed into a 6-gallon pot, it reacted and overflowed, contacting and burning the employee's right hand and forearm.",1
"On February 1, 2017, an employee went to adjust a piece of meat on the bacon line and his hand was pulled in resulting in the loss of skin on the hand.",1
An employee was replacing the transmission in a one-ton truck using a jack. The transmission shifted and the employee's third finger on the right hand was crushed between the transmission and the jack resulting in a partial amputation of the finger above the first knuckle.,0
"An employee was fixing a damaged pipeline and was struck by a pickup truck. The employee suffered a broken leg, rib trauma, damaged spleen and a punctured lung.",1
"An employee was walking alongside a Lull (forklift) while balancing a 21 ft. long pipe next to the front tire. As the operator moved forward, the Lull ran over his foot. The employee's foot was amputated.",0
An employee was pushing a cart when the brake part slid back onto his middle finger pinching it between the cart and the brake part.  The finger was fractured and required surgery.,1
An employee was labeling equipment to identify two high voltage batch feeders when he was burned by electrical shock from the feeder.,1
"On February 1, 2017, an employee fell while installing roof sheeting. The employee's fall protection retractable did not hold, and the employee fell from the edge of the roof to the ground, breaking ribs and a hip.",1
An employee was assembling the printer pinion gear at his work bench when his right pinky finger was pinched between the bearing housing and the housing of the gear box resulting in the amputation of his right pinky fingertip without bone loss.,0
An employee's index finger was lacerated and partially amputated while adjusting a timing belt on a bagging machine. The machine was not locked out at the time.,1
"An employee was digging a hole in the ground using a high pressure vacuum truck while standing on the edge of the hole.  As he was digging, his foot slipped under the stream causing an injection wound to his left foot that resulted in the amputation of a toe on the left foot.",1
An employee was operating a strip saw to cut meat and cut their right middle finger. The employee was hospitalized for surgery.,1
An employee entered the festooner machine to fix material that was not laying correctly. The employee was pinned between the slow moving part and the body of the machine resulting in a small laceration to the liver. The machine was not locked out/tagged out at the time.,1
"An employee was framing the corner area of an apartment complex on the fourth floor when he fell approximately 30 feet from the edge to the dirt surface below. He broke his left wrist and a bone in his back, requiring hospitalization. Fall protection was not worn at the time of the incident.",1
"An employee slipped and fell to the ground while coming out of the bathroom, suffering herniated discs in the back that required hospitalization.",1
"An employee was operating a spot welding machine, reached for a bolt, and crushed the right index finger in the welder.",1
An employee was moving a work bench when the bench leg collapsed. The bench then amputated his left third finger.,0
"A temporary employee was working on a machine used to split pillar cores when a piece of log broke off into the machine. As he attempted to retrieve the piece, the machine amputated his thumb tip.",0
An employee was troubleshooting a malfunctioning descalper machine when the employee's right middle finger was pinched and amputated between a belt and pulley. The belt was guarded at the time.,0
An employee was picking up pieces of scrap from the floor when his finger was caught between a belt and pulley on a vibrating conveyor. His right ring fingertip was amputated.,0
"An employee was performing tree trimming operations while tied off to a tree branch. The branch broke and the employee fell 12 feet to the ground, fracturing the L1 vertebra and requiring hospitalization.",1
"An employee fell from a tanker while changing the caps, suffering a head injury.",1
"An employee fell off the side of a trailer, fracturing his skull and rupturing his spleen.",1
"An employee was operating a chime spray machine when his finger was caught between the chime and the lid, amputating his right index fingertip.",0
"An employee was stabbed in the right arm by a coworker, suffering tendon and muscle damage. He was hospitalized.",1
"An employee was driving a stand-up rider powered industrial truck (PIT) beside food storage racks when his left thumb was pinched between an upright post for the PIT's overhead guard and a storage rack, de-gloving/amputating his thumb tip.",0
"An employee was working in an excavation, tightening flange bolts on a pipe, while an excavator operator was changing the excavator bucket nearby. The bucket came loose, hit the ground, and rolled approximately 10 feet into the excavation, striking the employee and pinning him underneath it. He suffered a lower leg injury.",1
"On February 2, 2017, at about 5:00 p.m., an employee was attempting to euthanize a possum when it bit the employee's right hand and scratched the employee's right arm. The employee was hospitalized.",1
An employee was pushing a fryer when his foot hit a table that had a steam well on top of it. The steam well fell on him and caused a second degree burn on his back.,1
"An employee was setting up a drilling rig when he fell approximately 14 feet off the substructure. He suffered damaged vertebrae and a cranium laceration, requiring hospitalization.",1
An employee slipped on ice in the parking lot and fell injuring her head and lower back.,1
"An employee was walking in the parking lot when she slipped on ice and broke her ankle, requiring surgery and hospitalization.",1
"An employee was responding to a call while driving the company patrol car on the private community roads.  The anti-lock braking system on the new patrol car failed and the employee crashed into boulders and trees, requiring hospitalization.",1
"An employee was testing a solenoid on a small-piece folder (for folding patient gowns) machine when the back half of his wrench was pulled into the folder along with his hand.  The machine roller lacerated and crushed his left hand, breaking two fingers.",1
An employee was exiting a forklift when he stepped on a nail. He was hospitalized with an abscess in his left foot.,1
"An employee was exiting a yard tractor when she fell backward, landing on and fracturing her left elbow.",1
"An employee was standing on the bed of a truck that was approximately 3.5 feet high. The employee tripped while attempting to pick up material and fell off the edge, striking the concrete below and fracturing the left leg.",1
"An employee was walking on the roof toward a ladder when he fell 15 feet through a skylight to the ground, breaking his right leg. He was hospitalized.",1
"An employee was gathering pipes and equipment for maintenance work when he picked up a pipe that had residual water containing phenol. The liquid splashed onto his right arm, causing a second degree chemical burn on his upper arm and elbow. He was hospitalized.",1
"An employee was feeding product into a machine that cubes/tenderizes meat when his right hand was pulled into the machine, partially amputating his middle and ring fingers.",1
An employee missed a step and fell while walking in a stairwell.,1
"An employee was inspecting formwork for a residential house when he tripped over wire mesh and fractured his right arm, requiring overnight hospitalization.",1
"An employee was preparing to drill a building foundation with rigging when a cable wrapped around his ankle, breaking his leg.",1
"An employee fell 8 feet through an opening in the floor into a pit that housed an inactive machine's engine components, suffering a head injury.",1
"An employee was unloading trash into a bin from a loading dock area when he slipped on ice and fell onto his left side, breaking three ribs. He was hospitalized.",1
"A temporary employee was turning a reach truck into a rack aisle when he ran into the yellow bumper at the end of the aisle. His left foot was caught between the reach truck and the bumper, shattering foot bones and requiring hospitalization and surgery.",1
"An employee was struck by a forklift, suffering a broken leg and ankle. He was hospitalized and had surgery.",1
"An employee tripped on a pallet strap and fell, breaking her hip and requiring hospitalization.",1
An employee was cleaning the floors in the mixing room. The employee was below the running mixer and attempted to remove product residue with his right hand. His fingers contacted the rotating auger resulting in amputation of the right middle finger at the first joint.,0
The employee was picking up rocks in the field and placing them in a tractor trailer. One of the rocks slipped and smashed his fingertip between it and the tractor bucket resulting in amputation at the first knuckle.,0
"An employee was walking to her car, slipped on ice and fell striking her head on the tire of a parked car. She suffered a brief loss of consciousness and a brain bleed. She was hospitalized.",1
"An employee was walking down the hall, slipped and fell causing a fractured ankle.",1
An employee was lowering the lift gate on a stake truck when his fingers were caught and smashed beneath the closing gate. His left middle finger was partially amputated.,0
"An employee was helping a disabled client up the stairs when the client lost his balance and fell backward, landing on the employee. The employee suffered a fractured pelvis.",1
"An employee was working from a ladder on top of a roof when the base of the ladder slipped, causing the employee to fall and break an ankle. The employee was hospitalized.",1
"An employee was struck by a car while crossing the street, suffering multiple fractures and requiring hospitalization.",1
"While cutting molding with a saw, an employee suffered a cut to the right interior forearm, requiring hospitalization. The saw was unguarded at the time.",1
"An employee was working on a 20 ft., wet roof when he fell. A personal fall arrest system was used, but it was too long.",1
"On February 3, 2017, an employee slipped on ice in a driveway while delivering mail, fracturing an ankle.",1
"An employee was cleaning the rig when he reached for something and fell 8 to 10 feet to the ground, fracturing ribs and puncturing a lung. He was hospitalized. His safety lanyard was unhooked at the time of the incident.",1
"An employee tripped over a water hose and fell, bruising a cheek bone.",1
"An employee started a car that was in storage for a long period of time and was observing it running under the hood when the engine backfired through the carburetor, creating a flame that burned the employee. The employee suffered a first degree burn to the face and second degree burn to the neck.",1
"An employee was using a grinder to cut a clamp on top of a tank that was being de-gassed. The sparks from the grinder contacted the gas fumes from the tank, starting a flash fire. The employee suffered burns all over his body, requiring hospitalization.",1
An employee was hospitalized after receiving chemical burns.,1
"While adjusting the steel arms (a lifting device) over a stacker pad for wooden truss manufacturing, an employee's left middle finger was crushed and partially amputated between the lifting arm and a wooden truss.",0
"An employee was removing patients due to a fire in an elevator shaft. The employee was exposed to the smoke and fumes, suffering a respiratory tract issue that required overnight hospitalization.",1
"An employee was walking dishes back to the dishwasher when she tripped on her foot. She hit her head on the ice machine while she was falling to the floor, suffering spinal vertebrae damage.",1
"An employee was running rubber through a refiner when his left hand was caught between a belt and the end roller, breaking four fingers and his wrist. The belt and roller were unguarded at the time.",1
"An employee was throwing scrap iron into a bin when a piece of scrap iron became caught on his left ring finger, partially amputating the distal tip.",0
"An employee was placing a steel coil that weighed approximately 5000 lbs. back into the coil rack when the banding caught on another coil, causing it to twist and strike the employee in the chest. The employee suffered a bruised liver, bruised kidneys, and internal bleeding.",1
An employee was hand feeding a shingle sheet between two rolls. The sheet pulled the employee's right hand between the rolls resulting in a tendon injury and swollen hand.,1
An employee was lifting a rebar cage with several coworkers when he felt a pop in his back. He was hospitalized with a slipped disc.,1
"An employee was unloading items from a pallet when she tripped on the shrink wrap, fell, and broke her hip, requiring hospitalization.",1
"An employee was overcome by the smell of gasoline, which was on a patient's clothing, and suffered respiratory problems. The employee was hospitalized.",1
"Two employees were attempting to bleed air out of a hydraulic line that was supplying a self-leveling dock plate. The first employee was under the dock plate while the other was above and operating the controls. The hydraulic pressure bled off suddenly, dropping the dock plate on the first employee's leg. He suffered a broken femur and required surgery.",1
"An employee was walking upstairs when she tripped and fell, injuring her shoulder.",1
"While moving supplies upstairs, an employee fell approximately 9 feet.",1
"An employee was riding in a truck on icy/snowy roads when the truck and trailer became stuck in a snow drift. The employee then attempted to push the truck out of the snow drift. When the truck became unstuck, it rolled forward, causing the trailer to strike and pin the employee underneath it. The employee suffered a bruised back and bruised legs.",1
"An employee was standing on an eight-foot ladder repairing an HVAC control panel in a drop ceiling. The ladder shifted and the employee fell approximately six feet. The employee lacerated his  forehead above the right eye, broke several ribs on his right side, and broke his right collar bone.",1
"An employee was loosening bolts to remove an engine from a tractor when a bolt broke, causing him to lose his footing and fall. As he fell, his wedding ring was caught on a tractor part and the flesh was ripped from his left middle finger.",1
An employee was using a hoist attached to a bracket to pull a guy wire right.  The bracket broke causing the guy wire to strike and break the employee's arm.,1
"An employee was repairing a pallet with a nail gun when a nail ricocheted and went under his face shield, piercing his left eye.",1
"An employee was unloading the inside of a truck trailer when a coworker drove a pallet jack into the trailer and struck the employee's leg. The employee suffered a fractured leg, requiring hospitalization and surgery.",1
"An employee was operating a backhoe to place trimmed pecan tree branches onto a trailer. The employee struck a tree that had trimmed branches still suspended from it. One branch came loose and fell, striking the employee's head and causing a traumatic head injury.",1
"Two employees were operating a welder machine. The first employee jogged the welder to thread coiled metal into the machine. As the coiled metal gets threaded into the machine, protective paper comes off the metal. The second employee was picking up the paper when he lost his balance. His hand then contacted the coil and was crushed between it and the hold-down roller. His right index finger had to he surgically amputated. The machine was unguarded at the time of the incident.",1
"An employee was changing a lamp in a light fixture when he lost his balance and fell off an 8-foot ladder. He struck the concrete below and suffered a broken back bone, fractured skull, and brain trauma.",1
An employee was troubleshooting a manufacturing process in the facility when he stepped on an anti-fatigue mat and it slipped out from under him. The employee fell to the tile floor breaking the right femur.,1
An employee was delivering mail when she slipped and fell on ice breaking her right ankle. The employee was hospitalized for surgery.,1
"An employee fell off a ladder while installing a light fixture in a suspended ceiling, fracturing vertebrae and requiring hospitalization.",1
"An employee slipped on ice on the sidewalk while on foot patrol, fell to the ground, and shattered his pelvis.",1
An employee was packing potato chips into boxes and had a seizure. He fell and hit his head on a table and then the floor. The employee was admitted to a hospital.,1
"An employee was lifting a feed cover. The cover would not lift any farther, so the employee decided to place the cover back down. In the descent, the employee's right middle finger became pinched and amputated between the cover and a fixed object.",0
"On 2/4/17, at 2:30 p.m., an employee was checking for an air leak inside the cabinet of a bag machine and amputated his left ring fingertip.",1
An employee was exiting his vehicle when a knife in his car door lacerated his right leg.,1
"While cleaning a lithography press, an employee's rag and left hand were pulled into the roller's point of operation. The machine was running at the time and the employee's hand was partially degloved and his left index, middle and ring fingers were partially amputated. The employee was hospitalized.",1
An employee was cutting plywood with a table saw when the blade partially amputated his right thumb.,1
An employee was snowboarding to perform a routine trail check when a guest snowboarder collided with the employee on the trail. The employee suffered a broken leg and quadricep lacerations.,1
"An employee was changing out tools in a CNC lathe. When he began to move a tool inside the lathe, the machine tooling arm caught and partially amputated his left middle finger between it and the raw material to be machined.",1
"While bending over to pick syrup up off the floor, an employee suffered a lower back injury that required hospitalization.",1
An employee was walking to his truck when he slipped on ice and fell breaking the right wrist.,1
"An employee was using a bandsaw to cut a bone-in ham when the meat rolled and his right thumb contacted the blade, amputating the tip.",0
"An employee was on an 8-foot ladder installing a bus duct switch when an electrical arc flash/blast occurred, burning the employee's face and right hand. The employee was also thrown from the ladder, suffering fractured ribs.",1
An employee was attempting to remove a piece of chicken trim from a machine when his left hand/arm entered the machine's moving parts.,1
An employee was speaking to a line mechanic about a film change on the bagger machine and suffered left-hand fingertip amputations.,1
"On 02/05/17, around 4:30 p.m., an employee was standing in the parking lot when a coworker reversed his vehicle and ran over her left foot. She suffered foot fractures and required surgery.",1
"An employee was responding to an emergency call after a liquid nitrogen leak at a laboratory. When the employee entered the lab to close the valves, the employee inhaled nitrogen, suffering hypoxia and loss of consciousness. The employee was hospitalized.",1
"On 2/5/16, at approximately 6:12 p.m., an employee was checking to see if a plate was loose in a case packer when his hand entered a pinch point on the running machine. He suffered two fingertip amputations.",0
An employee was exiting a forklift when his ankle was crushed between the vehicle and a raised dock plate. He suffered a broken ankle.,1
An employee suffered a left index finger amputation behind the fingernail while moving an auger.,0
"An employee was operating a jack to pick cases and place them on pallets when he moved his jack to avoid a nearby coworker. As he moved to the left, his left ankle became pinned between the riding platform of the jack and some warehouse racking. His left ankle was crushed and required hospitalization.",1
The injured employee was cleaning elevated processing equipment from a ladder stand platform. A second employee cleaning the floor surfaces unlocked the stand's wheels and moved the stand. The injured employee fell to the floor and fractured their C-4 vertebra.,1
"While backing an electric pallet jack out of a trailer, an employee struck another parked electric pallet jack. The employee's foot was outside the operator's platform, and the ankle was crushed between equipment, requiring hospitalization.",1
An employee was feeding material into a set of calendar rolls when the operator started the machine. The employee's gloved hand was then caught in the machine and his finger was amputated. The machine was not locked out at the time of the incident.,0
An employee was operating a standup powered industrial truck. The employee tried to stop the truck with their foot and broke the left leg.,1
"An employee was replacing gears on a machine when the shaft moved during the lift and caught his left thumb, amputating the tip. The machine was locked out at the time.",0
An employee was cutting a 4x4 stud on a table saw when the saw blade amputated his left index finger.,1
"An employee was helping a driver by moving a scissor lift with its remote control when the lift ran over his foot, breaking his left tibia just above the ankle.",1
"An employee was helping to bag groceries when she lost her balance and fell to the floor, fracturing her left hip.",1
An employee was adjusting the dye in a press brake when the press brake came down and crushed his left hand.,1
"An employee fell off a 20-foot ship ladder, suffering a fractured left elbow, dislocated left shoulder, broken left ankle, two broken ribs on his right side, and a broken right leg.",1
"An employee was cleaning the fryer, passed out and struck their head on part of the fry station resulting in a bump on the back of the head.",1
"An employee was climbing an extension ladder to the top of a seed barn when he fell 15 feet to the ground, injuring his right elbow. He was hospitalized.",1
"An employee was on a ladder turning a hot water valve when the valve threads stripped and caused hot water to spray the employee. He fell about 5 feet to the concrete floor below, breaking two ribs.",1
"An employee was watching a crane drive a timber pile into the ground. His hand was between the cable and the timber pile as the crane operator lifted the cable. The cable then pulled tight, pinching and amputating his right thumb tip.",0
"On February 6, 2017, an employee was using an oxygen/acetylene torch to remove existing welds between plate steel when a spark ignited his insulated bibs. He suffered burns on the upper thighs of both legs, requiring hospitalization.",1
"An employee was getting out of a truck when he slipped and fell to the concrete floor, fracturing his left shoulder and the left side of his hip.",1
"An employee was exiting the ""dog house"" when his right pinky finger was caught and amputated between the door and the doorway.",0
"An employee was climbing down equipment to secure it to the rear trailer of an 18-wheeler. His ring was caught as he was climbing down, and he sustained an avulsion injury to his left ring finger.",1
An employee was using a hand drill to drill a hole through a header when the paddle bit went through the wood and drilled into his right index finger.,0
"An employee was operating a band saw when a piece of wood became caught and kicked back, causing the employee's hand to enter the point of operation. The employee suffered a laceration to the right hand between the third and little fingers, requiring surgery.",1
An employee was clearing plastic from a packaging machine when his left index and middle fingers contacted the machine and were injured. He was hospitalized and had surgery.,1
"An employee was loading equipment from a forklift onto the bed of a pick-up truck. When he attempted to step backward, his foot became caught on an object and he began to fall. He tried to catch himself by reaching to the ground and broke his left arm.",1
"On 02/06/2017, an employee was using a framing nail gun to set wood to the wall when a nail ricocheted and struck his left thumb. He was hospitalized and had surgery.",1
An employee was cutting meat with a band saw when the blade amputated his left thumb tip.,0
An employee was guiding a steel load that was being lowered from a tower crane when the load pinned and crushed the employee's right foot.,1
An employee suffered a right index finger amputation while using a shear machine.,0
"An employee was helping a resident when the resident pushed her. She lost her balance and fell to the floor, breaking two bones in her left forearm.",1
An employee was hospitalized from injuries received when his pickup truck flipped while on a lease road. The employee sustained broken ribs and a broken clavicle.,1
"An employee was walking in the sawmill area when a powered industrial truck ran over her left foot, breaking it and requiring hospitalization.",1
An employee was removing metal pieces from a conveyor belt's magnet roller when his glove was caught and his left arm was pulled between the belt and the roller. He suffered a left radial forearm fracture. The conveyor belt was unguarded at the time.,1
An employee fell approximately seven feet and suffered a hairline fracture of the pelvis and various bruises to the arms and legs.,1
An employee was bleeding the pressure off the anhydrous ammonia tank when the anhydrous ammonia spilled and burned the lower half of his body.,1
An employee was using a pneumatic nail gun when the gun nailed the back of the employee's left hand.,1
An employee was attending a meeting in a conference room next to a laboratory. The lab was using xylene in a ventilated hood when the hood fan failed and xylene was released into the conference room. The employee suffered a respiratory allergic reaction and was hospitalized.,1
"While getting up from a work station, an employee tripped over a personal bag that was sitting next to the work station. The employee fell to the floor and fractured the left hip.",1
"An employee was loading wood into a molder when the employee's fingers were caught between two pieces of wood, causing a partial fingertip amputation.",0
An employee's arm was caught and amputated in a horizontal dough mixer.,1
An employee was exiting a vehicle when the employee's left middle fingertip was caught and amputated between the door and a trailer.,0
An employee slipped in the vehicle parking lot while walking to a tow truck and fractured the right femur.,1
"An employee was placing a part in a bending machine when it cycled, amputating the employee's left middle finger.",1
An employee was trying to change over the robot settings on a pneumatic welding machine when a coworker pressed a button and a plate came down and partially amputated the employee's right ring fingertip.,0
An employee was loading a conveyor belt with lumber when his left pinky fingertip was caught and amputated between the sprocket and chain on the conveyor belt.,0
"An employee was returning to demo court to inspect the area when she stepped backward, lost her footing, and fell. She fractured her right wrist.",1
"An employee was unjamming a thermoformer when the employee's glove was caught by the conveyor chain. The employee's left hand was then pulled into the chain and sprocket, crushing it.",1
An employee's finger was crushed in a closing door.,1
"An employee fell while picking fruit from a ladder, fracturing two vertebrae.",1
An employee was gauging a chemical transport tank when a hatch fell on and amputated his finger.,0
"An employee bent down to pick up objects on the floor. As she stood up, she hit the back of her head on a shelf.",1
"While packing product on a conveyor system, an employee observed product accumulating at a part on the conveying line. When he attempted to clear the jam, his right hand was caught in the operating equipment, amputating his middle fingertip.",0
"An employee was cutting paper. When the employee depressed the cutter, the right middle fingertip was caught in the clamp and amputated.",0
"An employee was attempting to free a coil chain from a coil when his left middle finger was caught between the chain and the coil, amputating his fingertip.",0
"An employee was walking into work, slipped on some black ice, and fell resulting in three to four broken ribs and a ruptured spleen.",1
An employee was working in a six foot trench and suffered a fractured ankle when the trench caved in.,1
"An employee was inserting the bracket into a press brake and lining it up when the press was activated via the foot switch. The press die then lowered onto his right middle and ring fingers, amputating his fingertips.",0
"An employee was setting up equipment to move a load of steel coils via an overhead crane when his left index finger was smashed between the lifting hook and lifting device, amputating his fingertip.",0
"An employee and a coworker were standing on a shelving unit when the support beam was knocked out beneath them. The employee lost his balance and fell approximately 15 feet to the concrete below, breaking his left wrist and requiring hospitalization.",1
An employee suffered a right index fingertip amputation while repairing a crimping machine.,1
"An employee was preparing to clean the drum of a mixer truck. To access the drum, the employee raised the hopper located at the rear of the truck and placed a brace underneath it. The hopper slipped from the brace and fell onto the employee's right index finger crushing it. The finger was surgically amputated between the first and second digit.",0
"An employee was working on a locked-out machine, which had a chain with slack. He then unlocked the machine and activated it. He was tapping the machine to see if it would speed up when his left distal finger was caught and partially amputated by the chain and sprocket.",1
An employee was installing a fan belt on an exhaust fan when his glove was caught and his right thumb tip was partially amputated by the belt.,0
"While installing metal sheets on a roof, an employee fell through an old sheet of roofing material to the concrete below, suffering a left arm injury.",1
"While using a punch press machine, an employee's thumb was caught and severely lacerated between a part and the machine, requiring hospitalization and surgery.",1
"An employee was attempting to couple a piece of equipment to a ""dog house."" He stepped onto the ""dog house"" dock plate, which slipped pinning his right leg  between the equipment and the dock plate. His leg injury required hospitalization.",1
"An employee was setting up a salad bar. A pot of chicken noodle soup was just filled and the pot was placed in the back kitchen hot window. When the employee lifted the pot, soup spilled on her neck and chest. She suffered first and second degree burns to the right cheek and neck, as well as chest burns.",1
An employee suffered a left thumb tip amputation while operating a band saw. Cut-resistant gloves were not worn at the time of the incident.,0
"An employee was removing an attachment from a skid steer. He released the locking devices of the bucket and disconnected hydraulic hoses from the machine, but the bucket did not separate completely from the machine. The employee operated the machine and raised the bucket to check if debris was preventing it from disconnecting. When he came over to check the bucket, it dropped on and broke his left foot.",1
"An employee fell and broke her hip, requiring surgery.",1
"An employee tripped while walking to the refrigerator in the dining area, falling to the floor and injuring a ball socket. The employee required surgery.",1
"An employee fell to the ground while exiting a truck cab, hitting and injuring his head.",1
An employee was attempting to clear a backup on a fillet machine line when his right middle finger was severely lacerated.,1
An employee was working and was exposed to exhaust from a cooking unit that had a malfunctioning ventilation system. He suffered respiratory irritation and was hospitalized.,1
"An employee was terminating a ground wire onto a mechanical lug on the lower half of a 480-volt, 200-amp disconnect. When he loosened the mechanical ground lug, the ground wire came into contact with an energized A-phase, which was not fully insulated, at the top of the disconnect. An arc flash then occurred and burned the employee's face and left hand.",1
An employee was feeding a roll into a tube-cutting machine when his hand entered the hopper area of the machine. The internal cutting blade then amputated his right middle finger.,0
"On February 8, 2017, employees were using a rope to pull over an ash tree stump. As the stump was falling, it hit a 40-foot dead scotch pine, causing it to break off and strike an employee's head. He was hospitalized with back and rib injuries.",1
"An employee was installing a handrail system in a newly constructed railcar unloading facility. A railway machine that was slowly moving through the area contacted some construction material, causing it to pivot and pin the employee's leg between the material and the edge of the concrete slab. The employee suffered a leg laceration and fractures, requiring hospitalization.",1
"An employee was standing underneath a 40-foot cell tower section that was propped up on jacks. The section fell on and pinned the employee, fracturing his clavicle, vertebrae, and ribs.",1
An employee was cutting an exterior trim on a table saw when his push stick broke and his left hand went into the saw. His left thumb was amputated above the knuckle.,1
An employee was installing a reamer rod in the ground when the rod cut his right leg.,1
"An employee was opening a window when it fell down and pinched the employee's right index finger between the metal sash and the bottom of the window, amputating the fingertip.",0
An employee was pulling belts on a large blower when his hand became caught on a belt. His right ring fingertip was amputated and a bone broke in his right index finger.,0
"An employee was walking when he slipped and fell, fracturing his left arm and dislocating his left elbow.",1
"An employee was unloading material and set it on the floor to put a pallet on it. When he picked up the pallet, he stepped back and hit the material, causing him to fall and injure his right hip.",1
"On 2/8/17, an employee was walking upstairs with a chainsaw when the employee slipped on oil and fell, tearing the rotator cuff in the right shoulder.",1
"An employee operating a company-owned vehicle struck the square cement base of a parking lot light. The employee suffered a punctured head and pain in the left elbow, right chin, and left knee.",1
"While walking through the packaging area, an employee tripped on a cart and fell onto the concrete floor, breaking her left hip.",1
An employee was preparing a shell core machine to make shells. The employee installed the right half of the pattern and placed the left into position. The employee activated the machine to bring the two pattern frames together. The rotating cylinder became stuck and the employee hit it with a hammer. The frames then closed on his left ring finger amputating it below the first knuckle.,0
An employee was hand feeding a copper tube into a finning machine with her right hand. The employee rested her left hand on top of the slide gate guard with her fingertips behind the guard. The machine was in the automatic mode. The slide gate activated and amputated her left small fingertip.,0
"An employee slipped and fell on ice, requiring hospitalization.",1
"An employee was cleaning a slitter machine's tension roll as part of setup operations when the machine was jogged. The roll pinched the employee's left hand, crushing/breaking fingers and amputating a finger.",1
An employee was climbing onto the catwalk area and fell injuring their abdomen.,1
An employee fell on icy stairs while exiting the building and fractured the left ankle.,1
"An employee rode a shuttle bus from the parking lot to the building. When she stepped off the bus and onto the street, she tripped on a curb, fell forward, and struck a cement column. She suffered contusions to the head, face, and scalp.",1
"An employee was terminating loading procedures on the top of a truck trailer when he fell from the trailer to the ground. He sustained a head laceration and broken sternum, requiring hospitalization.",1
"An employee slipped on ice in the parking lot while helping a customer bring groceries to their car, suffering a left leg injury.",1
"An employee was walking from one building to another when she slipped and fell on ice, fracturing her pelvis.",1
"An employee was on a man lift with a coworker erecting product racks. The employee had his hand on the rail of the basket of the man lift while it was being raised. His left middle finger was then caught between the racking and the rail of the man lift, partially amputating the fingertip.",0
"An employee was stepping backward from a chair in the cafeteria when she bumped into a bench behind her and fell, suffering left hip/lower back pain.",1
"On February 8, 2017, at about 9:30 AM, an employee was inspecting air handling units and amputated his right middle fingertip when it was caught between the moving belt and pulley of a fan blower.",0
"An employee was working on a tractor with a blow gun when the gun's air pressure removed the bolt. The employee's left middle finger was then smashed between the brake chamber and tractor, partially amputating his fingertip.",0
"An employee was walking on the property when she slipped on an acorn and fell, fracturing her left leg.",1
"An employee was in a feedlot pen helping a coworker with a steer that was having problems getting up. The coworker was behind the animal and the employee was at its head, attempting to move it. After he moved the steer's head, the animal tried to get up. As it was trying to stand, the steer swung its head and hit the employee's lower right leg, fracturing his tibia.",1
"An employee was hooking up a strap to connect a small excavator to a concrete saw. While a coworker was picking up the saw with the excavator, he attempted to readjust the straps at the moment the two pieces of equipment came together. His left ring finger was caught and amputated from the nail between the excavator bucket and the concrete saw.",0
An employee was cleaning contaminants from stripper rings on a slitter head when the employee's left arm was pulled into the running slitter and crushed. The employee was hospitalized.,1
An employee was using a wire wheel to remove corrosion when a filament from the wire wheel flew off and embedded itself in his hand. He was hospitalized for surgery.,1
"An employee slipped and fell on an icy brick walkway, tearing her right ACL.",1
An employee was retrieving a semi truck tire rim from an elevated storage rack using a ladder. The ladder moved and the employee fell and sustained a large gash on the head.,1
An employee was attempting to remove jammed wood from a band saw when the blade cut his index finger. The saw was not locked/tagged out at the time.,1
"An employee fell while going from a ladder to the roof, breaking ribs and the collarbone. The employee was hospitalized.",1
An employee was working on a machine when his right hand was trapped and injured between two parts.,1
An employee was filling a mixing hopper when two fingers on his right hand were amputated by the mixing paddles.,1
"An employee was making adjustments to a planer when his left hand contacted the fan motor, partially amputating his ring and middle fingers.",0
"An employee was removing a steel pot that was in the upright position. The steel pot was supported by its own weight on the ground. In trying to do so, the steel pot shifted and leaned to one side. The steel pot landed on a piece of cement wall that was adjacent to the steel pot. The employee's finger was caught between the steel pot and the cement wall. The employee's right middle finger was amputated at the last knuckle.",0
An employee was bending a sheet metal part in a press brake when the employee's left middle fingertip was pinched and amputated between the tool bed of the press brake and the sheet metal part.,0
"An employee was walking and talking to a cashier when she struck a column. She fell to the floor and suffered a fractured right wrist, requiring hospitalization.",1
"An employee was operating a forklift truck when he struck a yellow pole. His left foot was caught between the truck and the pole, crushing his left leg and requiring hospitalization.",1
"An employee was operating a pipe grooving machine when the employee's glove and hand were pulled into the point of operation, partially amputating the right index finger to the second knuckle and the middle fingertip to the first knuckle.",0
An employee was cutting food with a knife when the blade amputated the employee's left thumb. Personal protective equipment was not worn at the time of the incident.,0
An employee was de-burring a machine part when the employee's right fingertip contacted the machine and was amputated.,0
"An employee and a coworker were welding on the inboard and outboard sides of a bulkhead. Welding slag became trapped between the sweatshirts of one employee and ignited. The employee suffered first, second, and potentially third degree burns to the right side of the back and right armpit.",1
"An employee was operating a skid pusher to push freight into a trailer while he pulled the door down. The door came down fast and caught his hand between the door latch and the edge of the skid pusher, amputating a fingertip and causing a fracture.",0
An employee was walking down the sidewalk carrying a briefcase when she fell. She suffered a brush burn to her right hand and a head injury that required hospitalization.,1
"An employee was standing in a box basket being lifted by a forklift, attempting to hang tarp, when the box basket tipped over. The employee fell from the forklift and fractured both knees, requiring hospitalization.",1
"On 2-9-17, at 2:30 p.m., an employee was removing a film wrap from a metal chill roller when he was caught in the equipment, suffering lacerations, contusions, and abrasions.",1
An employee was shifting a material support stand with a coworker when the employee's left thumb was pinched between the tops of the support being moved and an adjacent support. The distal tip of the employee's left thumb was amputated.,0
"An employee slipped and fell on ice, breaking six ribs and requiring hospitalization.",1
"An employee slipped in the icy parking lot and broke her ankle, requiring surgery.",1
"On February 9, 2017, an employee was delivering mail to a customer's home. As she made the turn onto the home's front sidewalk, she slipped on ice and fell to the ground, fracturing her right fibula and dislocating her ankle.",1
"An employee was beginning to do a pre-operational inspection on equipment. She was visually inspecting a running tail cutter when she noticed some debris in the wheel. She put on her glove and attempted to clear the machine of debris. When she did, her glove was caught by the equipment, which then amputated her right index fingertip.",0
"An employee was trying to enter the cab of an 18-wheeler by reaching for the steering wheel to pull himself up when he slipped and fell to the ground, fracturing his left fibula and tibia. He was hospitalized.",1
An employee's hand became caught in a drill press and was seriously injured.,1
"An employee was preparing an order by hand to load into a forklift truck. As the forklift transported the pallet, the pallet struck the employee, fracturing and deeply lacerating his lower leg.",1
"An employee was removing lashing (securing) rods from containers when a rod fell and hit the employee on the hard hat, causing a concussion.",1
"An employee slipped and fell on an icy/snowy ramp while exiting a ship, breaking an ankle and requiring hospitalization.",1
"While walking in the parking garage of a jobsite, an employee fell from a step and suffered a broken hip, requiring hospitalization.",1
"An employee was helping a forklift operator load a non-working truck into a cargo shipping container. The truck was being placed into the shipping container facing outward when the tires slipped off of the lip of the container and the truck bounced. The employee's left ring finger was caught and pinched in the hood, amputating his fingertip.",0
An employee suffered a foot injury requiring surgery when his left foot was pinched between the forklift he was operating and a racking system.,1
"An employee was driving a utility cart to a cafe to pick up garbage when she overcorrected her steering to miss a parking lot island pier and flipped over. She was pinned underneath the utility cart and sustained a head injury, a fractured clavicle and pelvis, broken ribs, and a punctured lung. She was hospitalized.",1
"An employee was cleaning a flow meter after applying anhydrous ammonia as fertilizer for corn. When he finished taking the flow meter out of the system, the meter still had product in the line. The product came out of the line and leaked onto the back of his legs, burning his lower calves and requiring overnight hospitalization.",1
"An employee was loading a semi trailer when his right middle finger was caught on an E-track inside the trailer, amputating his distal phalanx.",0
"An employee was performing maintenance on a belt. He placed a 36-inch pipe wrench on the belt while it was out of service. When he turned the belt back on, the wrench flew off and hit him, causing head trauma and multiple facial and nose fractures.",1
"An employee slipped and fell down a flight of stairs inside his workplace, fracturing his right hip and requiring surgery.",1
"While spraying a runaround conveyor machine with a pressure washer, an employee noticed something on the conveyor belt. The employee was attempting to remove the object when the employee's hand was caught between the belt and a moving sprocket. The employee suffered a right arm fracture and tissue damage.",1
An employee was on top of a shopping cart trying to reach a tote of lettuce on an upper shelf. The employee then fell and injured the left leg.,1
"An employee slipped in the snowy/icy parking lot, fracturing his right ankle and requiring surgery.",1
An employee was dumping a tray of water when her right hand struck the side of a machine. She suffered a contusion that required surgery. The machine was unguarded at the time.,1
Two employees were unloading equipment with a truck-mounted spooling crane cable. They attempted to untangle the cable by spooling it out. The first employee's hand was on the spool when the second employee engaged it. The cable then amputated the first employee's thumb.,0
"While walking into work an employee slipped on ice and fell, breaking a bone in her leg.",1
An employee was removing shoring material when it slipped out of the employee's hand and amputated the right pinky fingertip.,0
"An employee was walking in the lot, slipped on ice and fell fracturing the tibia.",1
"An employee was standing on a 3-foot scaffold using a wrench to turn a tool on a machine when his wrench slipped. He slipped off the scaffold and hit the floor, breaking six ribs and suffering a contusion.",1
An employee slipped and fell on the left side of his back while shoveling snow from the loading dock. He fractured three ribs and suffered bruising.,1
"An employee was climbing down from a pot carrier when he lost his balance and fell to the concrete floor. He landed on his feet, twisted his right foot, and fractured his heel bone.",1
"On February 9, 2017, an employee slipped and fell on ice while walking from the maintenance shop to a delivery truck, fracturing the left hip.",1
"On February 9, 2017, at about 9:45 p.m., an employee was standing on active hot fryers, containing 350 degree hot oil, to retrieve hood filters when he slipped and fell into the oil. He suffered burns to both legs from the knees down.",1
An employee was inside a trench box waiting on pipe to be lowered when a piece of PVC pipe fell from above and struck the employee's leg above the ankle.,1
"An employee was placing a hold tag on a pallet in the shipping dock area when a forklift struck him, fracturing his left leg.",1
"An employee was trying to run a sand line down a hole when the line stopped. The stopping motion threw a loop in the line. When the employee attempted to grab the line, it dropped down the hole and amputated three of his right-hand fingers.",0
"An employee was preparing to sweep the floor with a push broom when he stepped on the broom, slipped, and fell, fracturing his left hip.",1
"An employee was driving a truck to a farm to deliver feed. As he turned onto the farm's driveway, the left rear wheels of the truck trailer ran off the driveway's culvert, causing the truck to turn over on the driver's side. He suffered three broken ribs and a lacerated spleen.",1
An employee was stripping nails from formwork when the formwork shifted and lacerated the employee's left ring finger.,1
"An employee was struck by a forklift, which lacerated his right lower leg and required hospitalization.",1
"An employee was shutting off the valve of a truck tank hose when the pressure caused the lid to blow off. The oil inside the tank then struck the employee, fracturing his pelvis and right wrist and causing a road rash on his chest area. He was hospitalized.",1
An employee was clearing a jam in a cutting machine when the machine started up and amputated the employee's fingers.,0
"An employee was installing an arch pipe in a driveway. After the employee released the mechanism on the hoisting apparatus that held the pipe, the pipe fell on the employee's finger, pinching it between the pipe and the concrete driveway. The employee's right ring finger was amputated at the first joint.",0
"An employee was attempting to close a dock door while sitting on a forklift. He had backed his forklift so that the rear right wheel was on a loading dock leveler that was still attached to a trailer approved for release. When the trailer was moved, the forklift fell over and the employee's hand was pinned between the ground and upper overhead carriage. He suffered broken bones in the thumb and palm area.",1
"An employee was carrying a tub of burritos to be repackaged when he lost his balance and fell, suffering spinal injuries and a herniated disc.",1
"An employee dropped an ink pen on the floor and bent under the desk to retrieve it. The employee's head struck the desk while coming back up, requiring hospitalization.",1
An employee fell from a ladder while cleaning snow from a vent. The employee sustained several injuries and was hospitalized.,1
"An employee was removing a mail container from her vehicle. When she stepped back, her ankle buckled and she fell to the ground, fracturing her left hip.",1
"An employee was getting paperwork out of a filing cabinet when she tripped and fell, breaking her left hip.",1
An employee was emptying the truck of salt. The employee tried to clear a jam in the auger when their glove got caught and their left hand was pulled into the auger resulting in a fractured hand.,1
"An employee was reaching under a machine bed to fix a motor when a pin on the actuator broke and the bed fell on the employee's hand, fracturing it.",1
"An employee was cleaning a channel on an anti-caking machine when his glove was caught in a rotating part, amputating his right index fingertip.",0
"A pipefitting crew was installing wear pads on a 30-inch-diameter pipe. When they lifted the pipe with a chain fall, it fell approximately 1 to 2 feet and pinched an employee's right foot between the pipe and support, injuring his right small toe, fourth toe, and the distal portion of his foot. He was hospitalized.",1
"On February 10, 2017, at approximately 5:10 p.m., an employee was attempting to move a nitrogen tank when his fingers were smashed.",1
"An employee was preparing to lift two bundles of cut steel from a conveyor when the weight shifted, causing the bundles to fall onto the employee's left leg, fracturing it.",1
"An employee was cleaning near a conveyor while the plant was in a state of shutdown because of repair activities. The conveyor then became energized and grabbed him, pulling him 75 feet in the air. He fell from the conveyor, injuring his neck and fracturing his hip.",1
"An employee slipped and fell on ice, fracturing a knee and the right ankle.",1
"An employee tripped and fell in the concrete parking lot, fracturing a hip.",1
"On 2/10/17, an employee slipped on ice in the parking lot and suffered serious head injuries.",1
"An employee was moving an oil pan with an overhead crane. The employee attempted to fit the oil pan between a second oil pan and a storage rack. The crane hook hit a support on the storage rack, causing the pan to break free from the crane hook and fall onto the employee's right foot. The employee's foot broke and required surgery.",1
"A transportation driver was attempting to load mail cages onto a trailer and placed them on a lift platform without securing them. When he raised the lift, a cage rolled off and struck the injured employee, who suffered chipped vertebrae.",1
"On February 10, 2017, an employee was using a compressor to spray concrete forms with Clean Strip J1A when the compressor hose became clogged. He attempted to unclog the hose by applying heat. The hose then ignited, burning the employee from his head to toes and requiring hospitalization.",1
"On February 10, 2017, an employee was performing functional tests on a lawnmower. The engine was running, but the drive belts for the mower were not engaged or moving. At approximately 8:15 a.m., the employee was walking near the mower when he tripped and fell.  As he fell, his right hand contacted a sharp area where the belt met a pulley and his right index finger was de-gloved.",1
"An employee was standing on a saw cab platform when the saw blade broke, flew in the air, and struck/lacerated the employee on the right side of the face, requiring hospitalization.",1
A temporary employee was operating the cardboard baler when it jammed. The employee's arm was caught in the machine while trying to unjam it. The employee was admitted to the hospital for his injuries.,1
"An employee was using chains to tighten a forklift onto a truck when a chain broke and struck the employee's leg. The employee was hospitalized with a tibia fracture, talus fracture, and lateral malleolus fracture.",1
"An employee was setting windows on the first floor when he lost his balance, fell backward, and struck his head on a concrete parking block.",1
"On February 10, 2017, an employee was un-jamming a box stuck between two conveyors when he fell forward and his left hand went between the conveyor belt and a gap roller. His left hand was de-gloved and fractured.",1
"An employee was trying to move granite slabs that were leaning against each other when he lost control of the slabs, which fell on and broke his right leg.",1
"An employee was on his way to service a customer's home, slipped on a patch of ice, and fell breaking several ribs.",1
An employee was balancing a granite countertop that was on the floor when it fell on and broke his left ankle.,1
"An employee was decorating a cake when she thought a cake was falling. When she reached to save the cake, she fell to the floor and could not get up. She fractured her hip and required surgery.",1
"On February 10, 2017, at about 2:00 PM, an employee was making a beverage delivery with a hand cart loaded with cases. While descending the ramp, the cases started to fall and as he attempted to catch them, his right hand contacted the ramp and his right middle fingertip was lacerated, causing the loss of his finger nail. 

He was admitted the hospital for surgery.",1
"An employee was struck by a scaffold board that was being disassembled, breaking his left wrist and requiring hospitalization.",1
An employee was helping to install section pipe when the employee's right middle finger was caught and pinched between the flanges of pipe and the existing line.,1
"An employee was standing on a ladder while trimming tree branches with a chain saw when a tree branch grabbed the saw. The employee removed a hand from the saw to try and catch the branch. The saw blade then lacerated the employee's left forearm, requiring overnight hospitalization and surgery.",1
"An employee was emptying trash into an outside dumpster. He climbed a ladder to stomp down the trash. While he was getting back onto the ladder from the dumpster, he lost his footing and fell to the ground below, injuring his back and head.",1
"On February 10, 2017, an employee was using a torch to cut an automotive die when a line ruptured, spraying the employee's legs with hot hydraulic fluid. The employee sustained serious burn injuries to both legs and was hospitalized.",1
An employee was lifting a manhole cover and dropped it on his foot. He suffered a left toe injury that required surgery.,1
An employee was removing concrete product from the molds and got a finger pinched between the pulling beam and the pulled concrete product. The employee's left little finger was medically amputated.,0
An employee was inspecting a bundle of steel when the overhead crane that carried the steel bundle actuated and pinched the employee between the steel bundle and a steel bundle carrier. He suffered pelvic fractures and crushing injuries to his left hand.,1
"An employee was climbing air-stair door steps when he fell approximately 5 feet to the ground below, striking his head and shoulder.",1
An employee was pulling a cow head off a slide when another head slid down and amputated the employee's left middle finger.,0
An employee was working with a palletizer to restock pallets of milk crates when his foot was caught and crushed between the pallet and a catwalk.,1
An employee was adjusting the position of a mud tank during a rig-up when the tank's hook released and struck him. He suffered a chipped tooth and facial fracture.,1
"On February 11, 2017, at about 6:15 PM, an employee was descending stairs with trash bags in both hands when he slipped and fell. He struck the back of his head and neck and was hospitalized.",1
"An employee was preparing to weld when his left index finger entered the path of the weld, partially amputating his fingertip.",0
An employee suffered a thumb amputation while cutting meat on a band saw.,1
An employee was struck by a hydraulic hammer that fell off a front loader.,1
"On February 11, 2017, at approximately 8:10 a.m., an employee was struck by a forklift truck as it was being backed out of a freezer, injuring his lower right leg and requiring hospitalization.",1
"An employee was using a crane to lower a 3-inch plate onto support boards. He was down on one knee while positioning the plate and operating the crane when he lost his balance and slipped. As he put his hand out to brace the fall, it was caught between the motor plate and a pallet. His left middle and ring fingertips were amputated.",0
An employee was repairing a fixture to hold a shotgun stock when an air clamp actuated and amputated the employee's left ring fingertip.,0
An employee was delivering mail when she was shot in the leg by an unknown assailant.,1
An employee was trying to center a vehicle on a lift ramp by moving a tire rim when his left middle finger was caught and amputated between the tire rim and the caliper.,1
An employee was retrieving mailbox keys from a safe when the safe door closed on and partially amputated his right pinky finger.,0
"An employee was walking along a pedestrian walkway when she tripped on a pallet and fell. She hit her head, lost consciousness, and was hospitalized.",1
An employee was cutting a bone-in pork chop with a band saw when the bone became snagged on the blade and pulled the employee's fingers into the blade. The employee's right middle finger was partially amputated.,0
"On February 12, 2017, at approximately 1:30 p.m., an employee was standing on a metal electrical box, clearing material from a hopper and ductwork. The employee stepped backward and fell approximately 4 feet to the floor, breaking ribs and requiring hospitalization.",1
An employee was supervising the parking garage at 3:00 AM when a customer attempting to exit the parking garage in their vehicle struck the employee. The employee suffered head injuries and a fractured leg.,1
The employee was moving a tall pallet load from a trailer with a powered pallet jack. As the pallet was exiting the trailer the top struck the bottom of the trailer's rollup door.  The door fell and the employee attempted to catch it with his right hand. The door dislocated the employee's right thumb that required two metal pins to be surgically inserted.,1
"An employee tripped on a curb in the parking lot while walking to the store, fracturing an ankle.",1
An employee was attempting to adjust the machine pump in a high-pressure system used to wash cars when the employee's right ring finger was caught and fractured in the pump.,1
An employee slipped on ice in the parking lot and suffered a fractured hip.,1
"An employee was testing a hydraulic catwalk when a 1-inch hydraulic line burst, causing high-pressure hydraulic fluid to release and lacerate the employee's left palm.",1
"An employee was performing service and maintenance on a machine when the pulley unit lacerated and fractured the employee's right hand, requiring surgery and hospitalization. The machine was unguarded and energized at the time of the incident.",1
"An employee slipped and fell on ice while clearing snow, fracturing his ankle and requiring surgery.",1
A volunteer was skiing and fell approximately 20 feet off the edge of the mountain suffering a head injury and several crushed bones.,1
"An employee was coming down a trailer side ramp with a dolly when he fell to the ground, lacerating his legs and breaking ribs. He was hospitalized.",1
"On 2/13/17, an employee was operating a crane and hook to load material onto a truck. When the employee lowered the crane hook to remove a sheet lifter, the employee's right index finger was pinched and amputated within the D-ring.",0
"An employee was opening a security gate and attempting to release a bent locking mechanism when his right ring finger was caught in the mechanism, amputating his fingertip.",0
"An employee was helping a coworker load a piece of equipment called a ""walk-behind"" onto a trailer. He was at the back end when they lost control of the equipment, which started to roll. His left middle fingertip was crushed and amputated by the equipment and the trailer.",1
An employee was changing a die on a press brake when the brake came down and caught his left middle finger. His finger broke and required surgery.,1
"An employee was carrying pies in the kitchen when she lost her footing and fell, striking her head on a counter and the floor.",1
"An employee was performing maintenance on a jammed turntable in an industrial parts washer. When he opened up the parts washer and stepped in, a section of screen collapsed and he fell into water that was approximately 180 degrees. He received second and third degree burns on his foot and shin.",1
An employee on a ladder was installing cable at a residential home when he fell 17 to 20 feet and suffered multiple head injuries.,1
An employee was performing maintenance activities on a rock crushing machine when the machine's bucket struck him. He suffered a chest contusion and was hospitalized.,1
"An employee was working on a cookie divider when her arm was pulled into a roller, fracturing it. She was hospitalized. The cookie divider was unguarded at the time of the incident.",1
"An employee was cleaning trim extruders on the lower side of a locked out auger. During the cleaning process, the equipment was unlocked. At that time, the employee's right finger entered the auger's drain port and was amputated.",0
"On February 13, 2017, at about 4:30PM, an employee was visiting a patient in their home and slipped and fell fracturing an ankle. The employee was hospitalized.",1
"An employee's left thumb was caught in a closing bank vault door, amputating the tip.",1
"An employee was setting up at his workstation while a nearby coworker was moving a pallet of parts. The pallet struck an empty pallet, which in turn struck the employee as he tried to move out of the way. He fell and landed on the empty pallet, injuring his back.",1
"An employee was struck by a vehicle while crossing the road, suffering knee contusions.",1
"An employee bent down to remove extra trim off a paper product. When he stood up, he struck his head on machine railing. He was hospitalized with a brain hemorrhage.",1
An employee was searching for a tool under a maintenance work table. He suffered lower back pain when getting up off the lowered position with bent knees.,1
"An employee was operating a skid steer to remove snow during a snowstorm when he felt something in the blades of the skid steer. He shut down the PTO switch, got out, and attempted to retrieve the object. During this process, his coat pulled the PTO switch back to the on position, and the equipment caught his glove and then hand, amputating his left index fingertip below the first joint.",0
"An employee was standing on a ladder changing out a light fixture. As he reinstalled the light, he was shocked when he touched the wiring. He fell approximately 4 to 6 feet from the ladder and struck his head on the concrete, fracturing his skull. The fixture was energized at the time of the incident.",1
The employee was observing an overhead crane moving a load and was walking. As the employee walked his left foot became caught between two air line pipes. He fell and broke his lower left leg.,1
"An employee was driving a reach truck when it malfunctioned, stopped suddenly, turned right, and collided into another reach truck. The employee's leg was amputated below the knee during the collision.",0
"An employee was helping a coworker hoist a motor to change out an auger when his right pinky became caught between the motor and the railing, amputating his fingertip.",0
"An employee on a scaffold was helping to install metal roofing material when a strong gust of wind blew and knocked the employee over the rail. The employee fell 10 feet to the floor, suffering skull and vertebrae fractures.",1
"An employee was climbing down the end ladder of a railroad hopper car when he lost his footing and fell approximately 7 feet to the ground, sustaining bi-lateral heel fractures.",1
An employee and several coworkers were moving a storage rack that was on pallet jacks when the storage rack struck another unit and the employee's right pinky fingertip was pinched and amputated between the rack and a wood shelf.,0
"An employee was forming metal on a press brake when he experienced a cramp in his leg and began to stretch his leg to get the cramp out. In the process of taking care of the cramp, the foot pedal was engaged which caused the machine to cycle and partially amputate his left ring and middle fingers.",0
"An employee was attempting to remove steel plates from a case packing machine that was held in position by two bolts. After the employee removed the top bolt and loosened the bottom one, the plate swung down and struck the employee's left hand, partially amputating the left thumb.",0
The employee was standing on a catwalk and using a cord tied to his hands to remove an empty film roll from a machine. The cord got caught in a roller beneath the catwalk and amputated the employee's left ring and index fingers.,0
"An employee was operating a snow blower when he slipped and tried to brace the fall with his left arm. He hit the ground and fractured his left arm, requiring surgery.",1
"On February 13, 2017, an employee was trying to adjust a stack of pallets in a trailer when the pallets shifted, causing the employee to fall and fracture the right elbow and right hip.",1
"An employee was performing prime-up operations when a discharge hose with a winged connection came loose from a manifold trailer. Boost pressure was being applied to the hose, causing it to whip around and spray water. As the hose was whipping around, it struck and fractured the employee's lower left leg.",1
"An employee's left hand was caught by the rotating spindle of a lathe, partially de-gloving the hand and amputating the thumb, index, and middle fingers at the first joint. The lathe was unguarded at the time.",1
"An employee suffered asthma exacerbation after using scented hand lotion, requiring hospitalization for respiratory distress.",1
"On 2/13/2017, an employee was working on an airplane in flight from Arkansas to Virginia when the airplane experienced flight turbulence, causing the employee to slip/trip/fall and fracture her right ankle. She was hospitalized.",1
"An employee was manufacturing metal cylinders. A cylinder slipped and fell 12 inches. As the employee tried to catch it, two fingertips on the left hand were amputated.",0
"An employee was walking along the side of a levy when he slipped and fell on damp grass, breaking his ankle in two places.",1
"An employee was using a screw machine to make pipe fittings when some metal chips jammed the machine. As the employee attempted to clear the chips, the machine crushed the employee's hand.",1
"An employee was performing a leak check on an engine cart by introducing air into the cart and spraying to check for leaks. He noticed leaking around the cap. He unlogged the cap, which had a latch on it. When he leaned in to get to the second latch, the pressure pushed the cap off. The cap hit him on the chin, fracturing his jaw and requiring hospitalization.",1
"An employee was making a delivery when he slipped and fell on ice, fracturing his right lower leg.",1
"Two employees were carrying a sheet of metal decking. When they went to put the sheet down, one employee's finger was caught between the cement wall and the sheet of metal decking, amputating the left index fingertip.",0
An employee was cleaning out the drain port underneath a mixer tank. He removed the drain port cap and was attempting to clear out the port when the mixer ribbon (metal agitator) struck his hand and partially amputated three fingers.,0
An employee was emptying trash around the job site into the main trash bin when a reversing skid steer ran over and fractured both of his feet and ankles.,1
"An employee was pulling a cool lift when he lost his balance and fell, striking his head on a guardrail and the ground and fracturing his wrist.",1
"An employee was spotting for a truck driver who was backing up to deliver a chemical barrel. When the vehicle stopped, the chemical barrel came loose and struck the employee, fracturing his scapula, both feet, and his tibia.",1
"An employee was getting back into the passenger side of his truck. When he grabbed the handle of the door, his hand slipped and he fell about 3 feet to the ground, fracturing his right tibia and fibula.",1
"An employee was observing the processing of pipe and noticed something had fallen off or was not correct during the process. He was walking across the hot pipe to retrieve the part when he slipped and fell onto the pipe, suffering third degree burns to his buttocks and the anterior side of his thighs and left hand.",1
An employee was using compressed air to clean out materials in a saw. The employee's left hand was on the frame of the machine when it cycled and a brass rail caught the employee's thumb and pinched it against the frame. The employee's left thumb tip had to be surgically amputated. The machine was unguarded at the time of the incident.,0
"An employee was putting parts into boxes near the rolling mill when the mill needed to be loaded with a new coil. During the loading process, the employee's glove was caught and pulled into the mill, and the employee's left pinky fingertip was amputated.",0
"An employee was changing tooling at the form molding machine when the tooling fell and struck the employee's left thumb, amputating the tip.",0
"An employee stepped out of a manlift 5 feet above the ground and fell, striking his head on the cement floor.",1
"An employee slipped while walking on a muddy ramp, fracturing her right ankle and requiring hospitalization.",1
"An employee was walking across the jobsite when a reversing bulldozer struck him, breaking his right leg and dislocating his left hip.",1
"An employee was threading a paper roll that was not moving. She went to the front of the roll to grab the tail. As she did so, her foot bumped the foot pedal and actuated the paper roll. The rolling mechanism then started up and her hand was caught in the middle and struck by the paper roll. Her left index, middle, and ring fingers were smashed, requiring surgery.",1
An employee was inserting a locking pin into a bushing when the locking pin amputated the employee's right thumb.,0
An employee was using a chop saw to cut wood when his left hand went under the saw blade and was lacerated. He was hospitalized.,1
An employee was loading a part onto a machine when his hand was caught between a boat sleeve and a cone. His hand suffered possible broken bones and a severe burn.,1
An employee was ground spotting during post pulling activities when his fingers were caught between the post pulling plate and a rigging strap. He suffered one broken finger and one lacerated finger.,1
"An employee was transporting racks of water bottles on a cart when the cart became caught on a drain depression and tipped over, causing the bottles to fall on him. He suffered three broken ribs.",1
An employee's left thumb was caught between a hydraulic clamp and the copper tube that was in the clamp. The thumb was surgically amputated at the last knuckle.,0
An employee fell approximately 5 feet while climbing on a vertical metal formwork to install whalers. The employee was hospitalized with back bruising.,1
An employee was packing tubes in a box from a moving plastic cleated conveyor in the Packaging Department. The employee's work glove was caught on the moving conveyor pulling his hand into the static plate on the conveyor and amputating the right index finger.,0
"An employee was laying metal decking when his foot slipped on a bar joist, causing him to lose his balance and fall 17 feet to the ground. He suffered a fractured rib, fractured vertebrae, and a lacerated liver, requiring hospitalization.",1
An employee was setting a trailer onto a hitch when he climbed underneath the tongue to try and position it. The tongue slipped off the ball and struck him in the head. He was hospitalized with forehead lacerations.,1
"An employee was operating a flexography machine when the conveyor belt began to jam with boxes. As the employee attempted to adjust the belt, the rotating belt's stitching removed the skin and fingernail from the employee's left pinky finger.",1
"An employee was helping a coworker lower and position a steel beam onto a rolling cart when his right middle finger was caught between the steel beam and the rolling cart, amputating his fingertip at the nailbed.",0
"An employee was working on the roof of a weather shelter when he fell 6 feet to the ground, crushing three vertebrae.",1
"An employee's right index finger was caught on a shackle on a rehang line, amputating it above the second joint.",0
"On February 14, 2017, at 12:45 p.m., an employee's right foot became caught on his desk, causing him to fall to the floor. He broke his left hip and was hospitalized.",1
"An employee entered a walkway that was near a portable dust collection system. The system created a blind spot, and a forklift struck the employee, who suffered a fractured right elbow and crushed right foot.",1
A temporary employee was using a sander and cut her left ring finger. Her fingertip was surgically amputated.,0
"An employee was unhooking her seatbelt while exiting a mail vehicle on a rural route when the shoulder strap fell and hooked onto her shoelace, causing her to fall to the ground and fracture her left hip.",1
"On February 15, 2017, an employee was performing a leak check on a stainless steel vessel. A nut had become stripped, allowing a bolt to fly off and hit the employee in the nose and forehead. The employee was hospitalized with lacerations, a broken nose, and a broken eye socket.",1
"An employee was rigging up a railroad car for unloading when a coworker unbound the chains, causing the load and the employee to fall. The employee suffered a collapsed lung and was hospitalized.",1
"While closing two oven doors, an employee's fingers went through the door handles and were pinched between the doors, amputating two fingertips.",0
"On February 15, 2017, an employee was working cables for dry dock spray curtains with a capstan. His left index finger was caught in the cable where it meets the drum, amputating his fingertip.",0
"An employee was operating a floor buffer on the second floor when he stepped back and fell from the upper level, which had no guardrails in place. He suffered a head injury and was hospitalized.",1
"An employee was unloading a dumpster when his hand was pinched between the forks of a forklift and a dumpster attachment, partially amputating his left pinky finger.",0
An employee was catching a horse when it kicked her in the chest. She sustained a contusion and bruising to her chest and was hospitalized.,1
"An employee was helping a Lull operator offload crates of switch gear from a truck when one crate became caught on another. The Lull operator then tilted the forks down. The products slid down and pinched the employee's right fingertip, amputating it.",0
"An employee slipped on black ice while checking on trailers in the yard, fracturing an ankle.",1
"An employee was using a handheld portable grinder to grind a vehicle bracket when the grinder came apart and struck him in the face, causing facial lacerations and multiple avulsed teeth.",1
An employee and a coworker were exchanging a mold. The coworker raised the mold with a stand forklift while the employee used a hand to lift a part. The employee's fingertip was then caught and amputated between the upper part of the mold and the forklift structure.,0
"An employee's right arm was caught in a ""notcher"" machine and amputated above the wrist.",1
"An employee was dismantling an excavator when the excavator counterweight (6.2 tons) fell on and crushed the employee's leg. The lower right leg was amputated. The employee also sustained a fractured arm, hips and vertebrae.",1
"An employee was unloading a truck when his hand was caught and smashed between a forklift tire and a piece of wood, requiring hospitalization.",1
An employee fell to the frozen ground while getting on a steel frame to lay out decking.,1
"An employee was watching an operator load materials with a forklift. The operator tilted the forks slightly, which caused the material to break its straps and roll off the forks. The employee jumped to get out of the way and fell on the cement floor, fracturing his hip.",1
An employee was conducting rigging operations in a vessel's cargo bay when he stepped back on ulexite mineral and fractured his right tibia.,1
"An employee was giving a hockey lesson on an ice rink when his hockey 
stick broke under pressure, causing him to lose his balance, twist his body, and fall on the ice. He fractured his right fibula and ankle.",1
"An employee was walking to a sampling location when he tripped on a barge rib and fell, striking the steel beam with his face. He busted his teeth, fractured his nose, and punctured an artery, requiring surgery.",1
"On February 15, 2017, at about 8:42 AM, an employee tripped on a pallet and fell, fracturing his right foot. 
He was hospitalized for surgery.",1
An employee was carrying two castings on top of one another when one of the castings fell and landed on his foot. His toe was medically amputated.,1
"An employee was operating a winding machine when it became jammed, causing the stitching to break. As the employee attempted to remove the string, his left middle finger was caught and lacerated between the machine's sling and pulley. The machine was running at the time of the incident.",1
"On February 15, 2017, at about 9:30 AM, an employee was using an excavator to push a concrete pipe together when his right forefinger was partially amputated above the fingernail, requiring surgery.",1
An employee was cutting stretch film for pallets when he was pinned between a stack of pallets and a forklift being operated near the stretch film cutting station. He suffered broken ribs and liver damage.,1
An employee was loading product from a cherry picker onto a rack when the lift malfunctioned and the platform fell to the ground. The employee fell with the platform and fractured an ankle.,1
"An employee was operating a floor scrubber when she slipped, fell, and suffered a hip fracture.",1
An employee was pulling on a car carrier to hook it to the back of a truck. The car carrier handle broke and the employee fell and hit his head on the ground.,1
"An employee was walking to a dock door to meet a delivery person. She opened the folding hand truck before opening the overhead dock door. The two sections of the hand truck pinched her left little fingertip, severely lacerating and amputating it.",0
"On 02/15/2017, at approximately 1200, an employee was operating a stand-up lift truck when the employee's left foot became stuck between the lift and a rack system. The employee suffered foot lacerations and was hospitalized.",1
An employee was repairing a check valve in a pipe and was burned by water that was 165-170 degrees Fahrenheit.,1
"On 2/15/2017, an employee was trimming parts on a trimming press and had a finger on the right hand crushed, resulting in amputation.",0
An employee was taking a roll of paper off a skid to put on the paper machine when the roll fell over and pinned him between it and the floor. He suffered a fractured lower leg and was hospitalized for surgery.,1
An employee was walking to check the clearance between a truck and the dock when a passing vehicle struck the employee. The employee suffered a broken left ankle.,1
"An employee was cutting a piece of paneling on a table saw. When she tried to move some debris near the saw, the blade amputated her right index fingertip.",1
An employee was re-installing a roller assembly after working on a motor beneath it when the roller assembly slipped and pinched his fingers between it and a cross-member. His right middle and ring fingertips were amputated.,0
"An employee was climbing a communications tower when his hand slipped while he was reaching for a cable grab. His fall arrest system failed to engage and he fell to the platform below, injuring his L1 vertebra, breaking his left ankle, and shattering his right heel.",1
"As the injured employee was kneeling down and rolling rims to a coworker, a third employee engaged him in a verbal confrontation and kicked him in the face while wearing steel-toed shoes. The injured employee was hospitalized with blunt force trauma to the head.",1
"An employee was attempting to re-thread a broken sheet through a roll on an extruder when he fell backward. His left hand hit the bottom pull roll, which pulled his left arm into the machine, crushing it and requiring surgery.",1
"An employee was closing the bulk mail container's metal door when it fell on his right hand, amputating his middle fingertip.",0
"On February 16, 2017, at approximately 3:05 p.m., an employee was walking through the shop when he stepped into a deep hole in the concrete floor, twisted his ankle, and fell, fracturing his left shoulder.",1
An employee was positioning equipment while getting ready to repair an over-the-road container when his left pinky finger was caught and amputated in the container door.,0
"An employee was changing the boom cable on a drum. He was standing between the boom drum and the holding drum on the frame below. While feeding the dead end of the cable with his left hand, he was using his right hand to balance himself on the drum. In the process, his right hand slipped and was caught between the cable and the drum. He was then pulled down and flipped over. He landed on the floor between the drums, dislocating his right elbow and fracturing his right wrist.",1
"An employee was standing in the warehouse removing freight from a trailer when merchandise fell on him, fracturing his L1 vertebra.",1
An employee was on the front bumper of a front loading dump truck assisting the driver who was having issues with the canopy when he fell onto the ground fracturing his right hip.,1
"An employee was changing the tool in a CNC stamping machine when the tool fell and smashed the employee's left pinky fingertip, resulting in an amputation.",0
An employee was operating a pump and was moving it from one drum to another when the rotating blade on the pump amputated his right pinky finger.,1
"An employee was carrying two 1-gallon bottles when his foot was caught on the leg of a power press and he fell, striking and breaking his lower leg on the foot of the machine.",1
An employee was injured when his lower leg was struck by a forklift.,1
"An employee was attempting to re-spool electrical wire onto a drum when he tripped over the wire and hit the ground, fracturing his ribs, right index finger, and left elbow.",1
"An employee tripped over a rolling apparel rack and struck the floor, breaking her femur.",1
"On February 16, 2017, at approximately 8:30 AM, an employee and a coworker were walking along the right side of a trash truck, picking up trash bags and containers. His coworker picked up a large trash bag, swung it around, and accidentally struck him, causing him to lose his balance. The truck's rear tires then ran over both his ankles and feet. He suffered left foot fractures and bruises/cuts to his right foot, requiring hospitalization.",1
"An employee fell on snow/ice while picking up a client at her home, breaking her hip and requiring hospitalization.",1
An employee was burned and hospitalized after a fire occurred at a natural gas well.,1
"An employee was standing on an extension ladder installing shingles on the roof. The employee was using a nail gun when the hose became tangled. The employee pulled on the hose and fell approximately 5 to 6 feet from the ladder to the ground, breaking vertebrae.",1
"While descending from a roof, an employee fell 8 feet to the ground and injured his left lower leg.",1
"An employee tripped over a threshold where the floor transitions from carpet to tile, suffering right arm, shoulder, and femur injuries.",1
"On 02/16/2017, at approximately 10:50 a.m., an employee tripped on the door threshold while entering a parts stockroom through an outside entrance. The employee stumbled forward and landed awkwardly, breaking a bone in the left upper leg and requiring surgery.",1
"An employee was inspecting a pump house frame when he discovered the back board box was installed upside down. He enlisted a coworker to help remove and reinstall the box. His left hand was inside the box and his right hand was underneath it as it moved a few inches. When it cleared the framework, the box fell and pinched the employee's finger between it and a piece of angle iron below. His right middle fingertip was partially amputated.",0
An employee was unloading propane tanks from a truck using a hand cart when he lost his balance and fell backwards to the ground. The tank then fell on and injured his left ankle.,1
"An employee was using an open-top tractor with a front-end loader to push a fallen tree when a limb (about 8 inches in diameter) fell on his face. He sustained a facial bone fracture and contusion on the back of the head, requiring hospitalization.",1
"An employee was walking through the aisle of the store, interviewing a potential employee, when he tripped over a grill that a co-worker was assembling. He contacted the ground and broke several ribs, his pelvis, and vertebrae.",1
"An employee was attempting to start a malfunctioning truck engine while standing between the wall and the front of the truck. The employee sprayed starter fluid into the air filter while a coworker was turning the ignition key. The engine started and the truck moved forward, pinning the employee between the truck and wall. The employee suffered a broken right femur and was hospitalized.",1
"An employee was putting a boomer on a trencher with a ratchet. When he stood up, his back seized up. He was hospitalized with a bulging disc and pinched nerve in his back.",1
An employee was prepping film on the production floor when he slipped and broke his femur.,1
An employee suffered a right middle fingertip amputation (no bone loss) while using a band saw to cut pork belly.,1
An employee was inserting a laminated panel into a pinch roller when the employee's left index finger was crushed and fractured between the panel and the roller.,1
"An employee was repairing a door in the fitness room. When the employee bent over to pick up tools, the employee suffered a lower back strain.",1
"An employee stood on the second rung of a platform ladder while cutting a door opening. When he stepped off the ladder, he rolled and fractured his left ankle. He was hospitalized and had surgery.",1
"An employee approached a coworker who was trimming the lower part of a carcass with a knife from behind. His coworker then accidentally punctured his right chest wall with the knife, injuring his right lung and requiring hospitalization.",1
An employee fell while cleaning around a piece of equipment injuring his left hip and requiring hospitalization. The employee was walking next to a transformer that had an electrical conduit connector protruding out a couple of inches. The employee's pant leg was caught on it which caused him to fall.,1
"An employee was sweeping on the furnace deck when he fell backward into a pit that was 12 feet deep, injuring his back and requiring hospitalization.",1
"A patient struck an employee in the abdomen, causing blunt abdominal trauma.",1
"An employee was pinned between a reversing truck and a wall, suffering a punctured left lung and eight broken ribs.",1
An employee was attempting to clear a chocolate outlet tube when a rotating agitator inside the chocolate tube amputated her right middle finger above the top joint.,0
An employee was fixing damage to a custom trailer door using a pry bar and block of wood when the door shifted at the top and amputated the employee's right finger.,0
"An employee was called to provide assistance with controlling a patient. During the struggle, the employee suffered a heart attack.",1
"An employee was using a machine when it caught his glove and pulled his finger in, amputating his fingertip. The machine was guarded at the time.",0
"An employee was climbing a ladder when he lost his grip on the rung and fell approximately 10 feet to the ground below. He damaged his shoulder and fractured his pelvis, wrist, and elbow.",1
"An employee fell after slipping on snow and ice in the parking lot, breaking his left femur.",1
An employee was handling sheet metal on a brake press when his left thumb was caught in the point of operation. He was hospitalized and had surgery.,1
"On February 17, 2017, at approximately 7:45 AM, an employee was uncoupling a 2-inch airline from an air compressor when the pressurized line became unhooked and whipped around, striking the employee in the lower right leg. The employee suffered right tibia/fibula fractures.",1
"An employee was cutting a tree limb with a chain saw in the bunching area on top of the tree. He noticed the limb was under pressure and stopped cutting. He was stepping over the limb when it snapped and struck his left leg, breaking both bones above the ankle.",1
"An employee was attempting to offload liquid, caustic soda from a trailer. The trailer was parked on a downward slope which allowed the chemical product to enter the dome area and contact/burn the employee's face and neck.",1
An employee was looking over the second-story balcony of a building when the guardrail gave way and the employee fell to the ground. He suffered pelvic and rib injuries.,1
An employee was moving a large rolling tote full of paper for shredding when the employee either tripped and fell or the tote fell on the employee. The employee suffered a broken left leg and was hospitalized overnight.,1
"An employee was standing on the back of a lavatory service truck while he was servicing water into the system. As he was connecting a dump hose onto the aircraft, he stumbled, fell 61 inches, and hit his head on the concrete floor. He sustained a contusion on his head, fractured four ribs, and fractured his left thumb, requiring hospitalization.",1
"An employee was grabbing a sheet of metal off a roof when the bolt that was holding it in place became stuck. When he pulled on the sheet, it slipped and fell on his left leg, cutting it so that it required hospitalization.",1
An employee was weighing out potassium cyanide and walking it to the lab hood. The employee suffered acute potassium cyanide poisoning. A proper respirator was not worn at the time of the incident.,1
"While moving materials across planking, an employee fell 11 feet to the ground, suffering a fractured right wrist.",1
"On February 17, 2017, at approximately 9:45 a.m., an employee was tightening a cylinder gland into the chuck of a lathe. The employee dropped the chuck wrench, which struck the lathe engagement lever, causing the lathe to actuate and eject the part. The part struck the employee, who was hospitalized with a back strain and contusions to the stomach and chest.",1
"An employee was sitting down in front of a machine observing the operation. While attempting to stand, the employee lost his balance and put an arm out to catch himself. The fleshy portion of his right forearm pushed through a gap in the machine's guard, lacerating it between the wrist and elbow.",1
An employee suffered broken ribs when caught between the bottom part of the rig basket and the pump jack beam.,1
"An employee was lifting stone material with a suction cup when the slab came loose and crushed the employee's right middle finger, amputating the fingertip without bone loss.",0
"An employee was removing a two inch plug and was thrown by the pressure build up (1100-1200 psi). The employee suffered a puncture wound to the leg, a broken left arm and fractures to the head and face.",1
An employee was pressing a stainless steel shaft into a wheel when the shaft shattered and became lodged in the employee's abdomen.,1
"An employee's hand was on the inside of a doorframe while a coworker was holding the door. The coworker closed the door, which amputated the employee's right ring fingertip.",0
"An employee fell and struck a scaffold while climbing a ladder to the roof, suffering a fractured cheek bone.",1
"An employee was operating a construction roller machine when it tipped over. The employee fell off the equipment and received internal injuries, requiring hospitalization.",1
"An employee fell down the stairs and suffered head trauma, requiring hospitalization.",1
"An employee was working from a ladder to connect a light fixture. The circuit was live and shocked the employee, causing him to fall 8 to 10 feet off the ladder. He suffered a minor electrical burn on his left hand, a lower back fracture, and a fractured right heel.",1
"An employee was walking down an aisle in the warehouse when he tripped over a shelving unit's end cap and fell to the floor, breaking his right elbow.",1
An employee was lowering a cover die with an overhead crane when his left index finger was pinched and amputated between the cover die and the machine sleeve.,0
"An employee fell on the handles of a sled he was dragging and fractured his hip, requiring hospitalization.",1
"While fabricating a metal bench, an employee placed a metal clamp on top of the bench. The clamp was not secured and fell on the employee's right thumb, amputating the tip.",0
"An employee was seated behind the reception desk at which he works. Dust from ongoing construction activities in the facility reached the employee, who experienced respiratory distress. The employee was hospitalized.",1
"An employee was operating a stack truck to move a pallet of materials from the racks. When he backed up the truck to reposition it, his arm became jammed between the truck and a pallet of materials on the racking behind him. His arm broke.",1
An employee was cleaning a piece of equipment when a piece fell and amputated his thumb tip.,0
"An employee was struck by a loader while walking through the plant, suffering multiple fractures to the pelvis and legs. The employee was hospitalized.",1
"On February 18, 2017, at approximately 5:30 p.m., an employee was replacing the chain on a breading machine conveyor that was turned off. The power was restored to the machine while the employee was checking the tension of the chain. The moving chain caught and amputated the employee's right index fingertip.",0
An employee was walking around a stacker truck when the truck operator ran over the employee's left foot. The employee's left pinky toe had to be surgically amputated.,1
"An employee was attempted to cross over a gap from one elevated work platform to another when he fell approximately 6 feet to the floor, fracturing his left tibia. The platform was unguarded and fall protection was not worn at the time.",1
An employee suffered frostbite to his left ring and pinky fingertips after working in the freezer. He was hospitalized.,1
Two employees were manually lifting a forklift boom to position it for a forklift. As the employees lifted the boom the jib slid towards the ground and smashing two fingers on one of the employee's right hand.,1
"An employee and a coworker opened the hood of a dump truck to diagnose why the fan of the radiator was not engaging. The injured employee was on the passenger side while the coworker was on the driver side. The coworker entered the cab and started the engine. The injured employee contacted the radiator's belt and pulley at that moment, which amputated the end joint of the employee's right index finger.",1
An employee was walking to a truck to turn on a pump when he slipped on ice dislocating and fracturing his ankle.,1
An employee sustained a right arm injury requiring hospitalization while cleaning a conveyor belt in the raw processing area. The employee was crouched and cleaning the bottom area of the conveyor when he lost his balance and attempted to stop falling forward. His glove was caught in the moving conveyor belt and pulled his arm in and under the belt.,1
An employee amputated the tip of his thumb while cleaning a food sealer.,1
"An employee was carrying hot oil for disposal when he slipped on ice on the pavement splashing hot oil onto his face, neck, chest, arms and legs. He was hospitalized.",1
An employee was underneath a tanker trailer checking the 5th wheel hook up and struck the back of his head. The employee was hospitalized for a concussion and skull fracture.,1
"While trying to elude a large flying insect, an employee fell and fractured the right elbow, requiring hospitalization and surgery.",1
An employee was cutting meat on a band saw and amputated the tip of his pinky finger.,0
An employee was removing a piece of pipe when he lost his balance and fell approximately 12 feet to the ground. He bruised his lung and broke his wrist and ribs.,1
An employee was picking up a pallet when a nearby wheelbarrow tipped over and struck the employee's right ankle severing the Achilles tendon. The employee was hospitalized.,1
"On 2/19/2017, an employee was about to start fueling an aircraft. He was walking between two baggage carts when one of the cart operators moved and he was caught between the two carts. He was hospitalized with head and right arm injuries.",1
An employee was attempting to dislodge a bottle from the bottling scrambler machine when the machine's belt amputated his ring fingertip. The machine was not locked/tagged out at the time.,1
"On February 19, 2017, an employee slid down a containment mat and struck a pressure gauge on the wellhead while attempting to pull slack in a wire line. He suffered a rib injury that required hospitalization.",1
"An employee was working on the elevated surface of a scaffold. As he turned the corner from one scaffold to another, he fell approximately 15 feet to an elevated roof deck below, lacerating the back of his head and suffering other scrapes and bruises. He required hospitalization.",1
"An employee was climbing into a truck when he slipped and fell, landing on his neck. He broke two neck bones.",1
"As an employee was manually moving a part onto the forks of a forklift, the part slipped and pinched the employee's finger between it and the ground, amputating the right middle fingertip.",0
An employee slipped on wet leaves in the parking lot while getting out of her car and fell. Her ankle was broken in three places.,1
"An employee was cleaning the blade of a power tool when it activated, partially amputating his right thumb. The blade was unguarded at the time.",1
An employee was operating a buffer machine when his right hand was caught between the die and the rollers resulting in a crushing injury to the ring and pinky fingers. The employee was hospitalized.,1
An employee was moving drywall on a motorized pallet jack when his leg was caught and fractured between the jack and a scissor lift.,1
"An employee was ripping lengths of oak on a table saw when the employee's left hand contacted the unguarded saw blade, amputating a fingertip.",1
"An employee was retrieving an order from the stock room when he tripped over some boxes and fell, breaking his lower left leg and requiring hospitalization.",1
"An employee fell off a stepladder to the floor, suffering two lumbar compression fractures and requiring hospitalization.",1
An employee was moving a load of pipes when it fell and broke his left index finger. He was hospitalized for surgery.,1
An employee was leaving the dock area in the dark and walked into a steel park stop used as a bumper for trucks. Both shins were lacerate and the employee was hospitalized.,1
An employee was operating a scaler at the batter depositor. The depositor needed to be adjusted for the weight of the batter being deposited in the cake pan. The employee was fixing the adjustment handle and amputated their left pinky fingertip.,0
"On February 20, 2017, an employee was getting materials from on top of an elevated mezzanine when the employee fell 8 to 10 feet to the lower level. The employee was hospitalized with a laceration and hematoma on the right shin and a bruised left hip and eye.",1
An employee was using a portable band saw to create quality samples from steel tubing. He held the band saw with his right hand and attempted to catch the sample piece with his left. The saw blade bound up inside the tubing. He was attempting to steady the saw with his left hand when the blade cut and amputated his left index fingertip.,0
A temporary employee was operating a machine in the assembly department and amputated the right middle fingertip.,0
"On the morning of February 20, 2017, at approximately 7:37 AM, an employee was using an emery cloth to polish a small copper electrode part on a lathe. His glove or the cloth became caught in the lathe's rotating chuck, which then avulsed his left ear and face, caused an abrasion on his left hand, and broke his left clavicle.",1
An employee loosening nuts using a hydraulic torque wrench pinched his left ring finger between the nut and wrench. The finger was amputated up to the first knuckle.,0
An employee lost his balance and fell from the third step of an A-frame ladder while attaching tie wraps to a lift cylinder. He was hospitalized with head and back injuries.,1
"A temporary employee was attempting to lift a rack of steel weld parts using a hoist when the parts shifted and fell on his left forearm, lacerating and fracturing it.",1
"On February 20, 2017, an employee was on a catwalk attempting to caulk the top of a wall. The employee slipped and fell to the concrete floor, suffering a punctured lung and fractures to the ribs, collarbone, and a toe. The employee was hospitalized.",1
"An employee was on the second level of the roof with his harness on and was preparing anchors to start work. The employee fell 15-20 feet through a hole and suffered broken ribs, a torn right lung, a ruptured spleen, a broken pelvis and bleeding on the brain.",1
An employee was operating a motorized pallet jack in the warehouse and pinched his left foot between the wheel and a metal plate resulting in the amputation of his left big toe.,1
An employee was loading product onto pallets. The employee's leg was caught between two pallets after a pallet jack pushed a pallet into the employee's leg. The lower left leg was fractured.,1
"An employee on a ladder was drilling a hole in concrete when the drill bit made contact with a rebar rod and kicked back, causing him to lose his balance and fall to the floor. He broke his left foot and right leg.",1
"An employee was holding the rigging line while he was signaling the operator to lift the load. As the load was lifted up, it shifted and his left hand little finger was caught between the rigging strap and the lifting box and was amputated.",0
"An employee tripped on a bump in the floor while walking lunch menus over to patients, fracturing her hip and requiring hospitalization.",1
"An employee was trimming bushes at a jobsite. As he was attempting to grab a hedge lopper, he grabbed the bottom of the tool and hit the trigger. The blade then amputated his left ring fingertip.",0
"An employee was collecting willow branches and using pneumatic clippers to cut the material to length. As the employee was cutting a branch, he amputated the tip of his left thumb without bone loss. The hospital reattached the tip of the thumb.",0
An employee was trimming palm branches when a falling branch struck him in the back and punctured a lung.,1
"An employee was using a crow bar to move steel beams for unloading while standing on the trailer bed of a truck. 

The crow bar came loose from the material, causing the employee to lose his balance and fall to the ground. He extended his arms to break his fall, resulting in broken bones in his right wrist and left elbow. He required surgery.",1
"An employee was driving a tanker uphill when the truck started rolling back down the hill and jack-knifed. The tanker rolled over, and the employee suffered a concussion and internal injuries.",1
An employee was making a delivery at a residence and was bitten by a dog on both arms.,1
"An employee fell 18 feet from an apartment complex roof while installing shingles, breaking two right-side ribs.",1
An employee suffered a broken right foot when a battery fell off a battery lift and onto his foot.,1
"An employee was helping to load empty cargo containers onto dollies. He was caught between two of the dollies when a cargo tug driver pulled them. He suffered lacerations on his head, face, and torso, as well as a broken ankle and broken ribs.",1
"An employee was installing bearings onto an axle hub with a handheld bearing press. The press malfunctioned and became stuck in the down position. When the employee reached into the bearing press to free the plunger, it shot up and partially amputated his left thumb tip.",0
"The injured employee was about to inspect a docked vessel and was accessing the vessel through a gangplank. While on the gangplank, an employee of the docked vessel opened the hatch door which pushed the gangplank off the vessel. The injured employee fell 40 feet into the Mississippi River and suffered multiple injuries to her body.",1
"An employee on a bakers scaffold fell while attempting to remove a light fixture. The employee's head struck the floor and suffered a contusion, requiring hospitalization.",1
An employee was performing maintenance on a roll-on ball dispensing machine. He was wiping the machine with a towel when his finger was pulled into the machine and was crushed between the drive pulley and belt. His left index fingertip was amputated. The machine was in operation at the time of the incident.,0
An employee suffered a left index finger amputation while actuating a pneumatic shaft device.,1
"The cover of a splice box closed on an employee's hand, amputating the ring and middle finger down to the middle knuckle and a small portion of the pinky.",0
"An employee was operating an axle die cutting machine when the die came down on his right hand, smashing his fifth digit.",1
An employee was removing a tree when it hit the employee and caused injury requiring hospitalization.,1
"An employee was sweeping the area in front of a work site when a flatbed truck containing post tension cables arrived. The truck pulled in through a gate and stopped to begin off-loading the post tension cables. The forklift operator unlatched the post tension cables and then noticed that the truck had stopped near a mound of dirt which the operator could not access with the forklift. When the truck moved forward, a post tension cable shifted and fell off the truck striking the employee who was sweeping in the face causing multiple lacerations and severing the top part of his left ear.",1
"An employee was helping to remove tie-downs on a flatbed trailer when two steel frames fell on him, fracturing his left leg and left wrist.",1
"On February 21, 2017, at approximately 9:35 p.m., two employees were moving bulk carts. The injured employee's left hand was pinched between the two carts, resulting in a crushing injury that required surgery and hospitalization.",1
"An employee was on a scaffold preparing an area for masonry work when the employee fell from the scaffold and onto some bricks, suffering a back injury and head laceration.",1
An employee was pushing a merchandise cart and collapsed or lost his balance and fell to the ground breaking the right ankle.,1
"An employee was helping a coworker hook up a power swivel on a servicing rig when he slipped and fell between the rig and the rig floor, injuring his head.",1
An employee was changing out the tensioner wheel on a roll grinding machine when the pneumatic positioner activated. His left thumb and index finger then became wedged between the positioner guide and the sanding belt housing. His index finger was partially amputated.,0
An employee was trying to dislodge a dock plate that was stuck to a trailer door when someone pushed the activation button for the plate. His right middle finger was then caught and possibly amputated between the dock plate and the door latch of the trailer.,0
"An employee was attempting to unjam a stacker machine when the employee's left hand was caught in the machine, amputating the index and middle fingertips.",0
"An employee was working near a conveyor in a recycled pallet shop. When he attempted to grab a piece of broken pallet that was sticking out, his right hand was caught between the roller and the conveyer belt. He suffered one pinched finger and an abrasion on the back of his right hand.",1
"An employee replaced a belt on a vacuum pump. When the employee was checking the belt alignment, his left hand ring finger was caught in a nip point causing a fingertip amputation.",0
An employee was testing electrical equipment that they produce in the factory and was shocked and burned on both hands.,1
An employee suffered a left index fingertip amputation.,0
An employee was welding when his shirt caught on fire resulting in burn injuries.,1
"On February 22, 2017, at approximately 1:45 a.m., an employee fell on wet pavement, fracturing his left tibia and fibula.",1
"An employee was removing a gutter from the wall of a residential structure and descending an 8-foot A-frame ladder when he missed the bottom two rungs and fell to the ground. He hit his head on a brick wall, sprained his back, and lost consciousness, requiring overnight hospitalization.",1
An employee was helping to load a backhoe hammer into a trailer when the employee's thumb was caught and partially amputated between a chain and the side of the trailer.,0
"An employee who was driving an unloaded stand-up forklift turned down an aisle. To avoid hitting an unoccupied forklift, he quickly turned the forklift and placed his right hand out to brace himself. His right hand struck the non-moving, unoccupied forklift, fracturing his wrist and the area between his index finger and thumb. He was hospitalized.",1
"An employee was closing the door to the rapid enforcement lane booth when a gust of wind caused the door to slam shut on his right hand, amputating his fourth fingertip.",0
An employee was standing on an extension ladder in an in-surface pool to take field measurements of an opening in a soffit. The employee then fell off the ladder and struck their head on the side of the pool.,1
"An employee tripped over a bolt and fell off the dock, fracturing his right shoulder.",1
"An employee was helping a maintenance crew put hammers back on the rotors of a hammer mill. The employee was positioning the rotor while a coworker used a bar to lift it. The rotor rotated downward while being lifted, and the employee's hand was caught in a pinch point between the key stop and frame of the rotor. The employee's left index fingertip was amputated.",0
"On February 22, 2017, at approximately 4:00 PM, an employee was operating a circular saw to cut a small block of a 2x4 when the saw amputated his left thumb.",0
"An employee was cutting a piece of plywood on a table saw when his left glove and hand were caught and pulled into the saw blade, amputating his index and middle fingers and lacerating his ring finger.",0
"On February 22, 2017, at approximately 4:15 p.m., an employee trimmed the top of a dead, 85-foot tree. The tree was notched and roped, and the employee made a back cut. As the tree was being pulled over, it caught the fork of a second tree. The second tree uprooted, fell, and struck the employee in the back left side, resulting in broken ribs, a fractured shoulder, and a punctured lung.",1
"An employee was hiking on a trail when he lost his footing on uneven terrain and fell to the ground, striking his head.",1
An employee was assisting in moving a sand blasting unit. The unit's hopper fell from the unit onto the employee's left hand amputating the ring finger.,1
"An employee slipped and fell on ice while walking to her car. She hit her head, suffering a concussion and bruising. She was hospitalized overnight.",1
"An employee was reversing a pallet jack when his hand was caught between the jack and a rack, partially amputating his right pinky finger.",0
"An employee was working on an overhead conveyor when a moving part smashed his left wrist, requiring hospitalization. The conveyor was in operation at the time.",1
"An employee was running a food packaging machine when it jammed with packaging material. When the employee went to clear the machine, her right middle finger was pinched and partially amputated by the heat sealing jaws. The machine was guarded at the time.",0
An employee was working at her desk when she got up and tripped over her sneaker. She then hit her head on a nurse's station and broke her wrist on the floor. She was hospitalized.,1
"An employee was feeding bar stock into a CNC Machine when the bar stock became jammed in the feeder. When he pushed the bar stock forward, it rammed into the side of the machine and struck his left middle finger, partially amputating it and avulsing a nailbed.",0
An employee was trailing ants throughout a facility when he stopped beside a pipe that emitted steam. The steam caused second degree burns to both ankles and the top of his feet.,1
An employee and a coworker collided around a corner while operating stand-up forklifts. The forks of the coworker's forklift struck and fractured the employee's left leg below the knee.,1
"An employee was on the roof preparing to replace old skylights in the truck shop building when he stepped through an unguarded skylight and fell approximately 30 feet to the concrete ground, suffering head trauma.",1
An employee and a coworker were attempting to remove a sewer grate when the grate shifted and pinched the employee's thumb between it and the ground. The employee's thumb was partially amputated.,0
"On February 22, 2017, at 8:30 p.m., an employee was working on a core press when a pressure plate was inadvertently activated. The plate amputated his left pinky toe and fractured his foot.",1
"An employee missed a step and fell while descending a two-step ladder, fracturing the left leg.",1
"An employee was standing near a burn barrel fire outside the floor truss building and received third degree burns from his thighs to his stomach, second degree burns to his chest and first degree burns on his neck when hot denatured alcohol was added to the fire and spattered onto the employee.",1
"An employee was preparing to eject a cardboard bale from a baler when both of the employee's hands became stuck in the ejector chain. The employee's left-hand thumb and pinky finger were bruised, ring and index fingers were smashed, and middle finger was amputated. The employee's right-hand pinky, ring, and middle fingertips were amputated. The right index finger was smashed and the thumb was bruised.",1
An employee was cutting straps off of outbound packages with a box cutter when he lacerated his right forearm. He was hospitalized.,1
"An employee was operating a standup lift when it jerked and he lost control. He then attempted to exit the lift. During the attempt, his left foot was caught underneath the lift, suffering skin damage.",1
"The employee was unloading skids from a truck when his right index finger was caught under the skid, cutting the ligament.",1
"An employee was stacking materials in a storage bin while a nearby coworker operated a wood saw. A flying wood chip escaped and struck the employee, avulsing the employee's neck.",1
"An employee was riding in an aerial lift when the lift went off a curb and tossed him up. When he came back down, he struck the edge of the lift, cutting his leg.",1
An employee was skiing downhill with his class and attempting to stop when he fell and broke his collarbone and sternum.,1
An employee was operating a banding machine and reached into the machine to remove a piece of wood. The platen that clamps the board closed on the employee's right index finger crushing the fingertip and fingernail.,0
An employee was pushing a 112-pound stack of steel product by hand when he felt pain in his lower back due to a herniated disc.,1
An employee was operating a machine that cuts penne pasta when strands of pasta became jammed in the machine. He attempted to clear the jam and removed the flexible plastic tubing. He saw that the pasta was jammed in the cone and tried to push the dough out of the bottom of the cone. The moving blade then amputated his index fingertip. The machine was not locked or tagged out at the time.,0
"An employee was installing a transmission line when the cable snapped, causing it to recoil and strike the employee in the mid section. He suffered broken ribs and a collapsed lung.",1
While walking an employee tripped and fell from a height to the ground level. The employee sustained a broken right wrist and was hospitalized.,1
"On February 22, 2017, at approximately 1:00 PM, an employee was helping to set up a pump on the skid. While lowering the pump, the employee attempted to align the bolts and caught his finger between the skid and the pump. The employee suffered a right middle fingertip amputation.",0
"An employee was standing near a flat bed trailer while conductor reels were loaded onto the flat bed. A reel came off the spreader beam, dropped and rolled onto the employee's legs. The reel was removed from his legs with a fork lift. The employee suffered lacerations and a fractured leg and ankle.",1
An employee was loading a tank when his left index and middle fingers were smashed and fractured under the tank frame.,1
"An employee was cleaning a concrete pump and breaking down the pipe. He was running a pig through the pipe when an air pocket in the pipe caused the pipe to buck and strike him, breaking his left tibia. He was hospitalized.",1
"An employee was pressing an air valve on a shaft to let air out. When the air was released, the roll moved on the shaft and the employee's right index fingertip was caught and amputated between the indentation on the shaft and roll core.",0
"An employee was operating an electric-powered ride-on sweeper. When the employee raised the seat to gain access to a brush belt and pulley assembly, the employee's thumb tip was caught and amputated between the belt and pulley.",0
One employee was hospitalized for electrical burns to both hands and feet while working on downed power lines when a live power line fell onto the de-energized line. Two other employees were hospitalized for observation.,1
"An employee's left ring fingertip was amputated while removing twine that was entangled in a roller. The employee's glove got entangled with the twine pulling the employee's finger into the feed roller. As the employee pulled the hand back, the fingertip was amputated by the twine.",0
"An employee was loading tools into company vehicles when he tripped and fell on asphalt, breaking his left elbow and wrist.",1
"An employee was helping to empty a drawer that was holding hot waste oil when the oil splashed her hand. She then dropped her side of the container and was further splashed. She suffered burns to her hand, left leg, and feet.",1
Employees were attempting to tow a stuck vehicle. The quick connect on the loader engaged and the injured employee's left hand was struck by a hydraulic pin resulting in the partial amputation of two fingers.,0
"An employee exited the stage and was walking toward the dressing room when she missed a step and fell to the floor, dislocating her shoulder and breaking her arm.",1
"An employee fell 12 feet from a pitched roof before installing the anchor point, D ring system, and retractable lanyard.",1
An employee was loading a pair of forks for craning onto a delivery truck. The pair of forks have a sliding mechanism that helps with loading and unloading. One of the forks slid towards the employee as he was loading the truck and his right middle fingertip was caught and amputated (no bone).,1
"On February 23, 2017, an employee was cutting a piece of polycarbonate with a foot shear when the hold-down came down and amputated the employee's right ring fingertip and crushed the pinky finger.",0
"An employee was loading a box truck when he fell from the lift gate of the truck and struck his head on the ground, fracturing his skull.",1
"An employee was removing debris from a truck when the employee slipped in water and fell to the ground, suffering a broken leg. The employee was hospitalized.",1
"An employee was waiting for the operator to start-up the machine and had her right hand resting flat on top of the turn-wheel, partially supporting her weight. When the operator started the machine, the turn-wheel rotated her right hand towards the opening where the giblets drop to be pushed into the package. As a result, her hand entered the opening as the push arm was actuated causing fractures to some small hand bones and a 1/4"" puncture (depth) wound to the back of her hand from a bolt.",1
"An employee was attempting to loosen a bore with a cheater pipe wrench when the wrench spun around and hit the employee's head, fracturing the skull.",1
An employee sustained a fractured right leg when a trench collapsed.,1
"An employee was greasing a mill drum and trunnion. This procedure is performed with the drum running so the contact area gets completely covered. During the process, the employee tried to grab some grease that had dropped on the ground and lost his footing. When this happened, three fingers on his left hand became caught and amputated between the trunnion and the drum.",1
An employee was running a punch press and amputated their right index finger.,0
"An employee was attempting to move a reel of cable that was located on a trailer when his ankle became lodged between the cable reel and pallet. He lost his balance and fell out of the truck, breaking his ankle and bruising his hip.",1
"An employee went into a room to give medication. When she turned to leave, her foot was caught in the oxygen tubing, causing her to trip and fall on her left hip. She suffered a fractured hip, injured right shoulder, and rotated left leg.",1
"An employee was removing parts from a skeleton using a magnet and hoist when a part fell from the magnet and smashed his left thumb, lacerating it and requiring hospitalization.",1
"On 2/23/17, at approximately 12:45 p.m., an employee was replacing U-bolts on the rear drive axle of a full-sized tractor-trailer when the jack that was supporting the truck slipped out from underneath, causing the employee's left forearm to be caught against a spring and the axle. The employee suffered a compound fracture of his forearm and was hospitalized for surgery.",1
"An employee was securing a strap on a trailer cover when the strap became unattached, causing him to fall and break his left wrist. He was hospitalized and had surgery.",1
"On 2/23/17, at approximately 2:50 PM CST an employee was standing on a standard gauge rail track operating a railcar's handbrake apparatus when the employee lost his footing/slipped and fell on his hip fracturing it. The employee was hospitalized.",1
An employee was descending the stairs when he lost balance and fell from the fourth step to the first step landing on his stomach. The employee was hospitalized.,1
An employee tripped over a co-worker's foot and fell in the kitchen breaking the left hip.,1
An employee was cutting lines and removing an electrical pole from the ground when the pole swung and struck the employee's right leg. The employee suffered a fractured right ankle and was hospitalized.,1
"An employee fell from a ladder while performing roofing repairs, suffering fractures and lacerations.",1
An employee tripped over a cord hanging from the deli scale and fell fracturing their pelvis.,1
An employee was operating a foot saw. The employee reached under the machine in order to clear a jam and her thumb was caught in an unguarded chain and sprocket causing an amputation of her left thumb to the first knuckle.,0
An employee tripped over an electrical cord and fell fracturing the left hip.,1
An employee was performing mechanical work from a six-foot A-frame ladder. The employee fell from the ladder and struck his face on the concrete ground resulting in a fractured jaw.,1
An employee was operating the plastic bottle forming machine and opened a guard to grease a sticking bushing. The machine was running at the time and the tip of his right index finger was amputated in a pinch point.,1
"While shrink wrapping a roll of fabric on a re-roll machine, both of an employee's hands and arms were pulled into the machine resulting in bruising. The employee was hospitalized.",1
"While installing metal decking, an employee fell approximately 20 feet to the lower level, fracturing bones. Fall protection was not worn at the time.",1
"On February 24, 2017, an employee was sanitizing the hock cutter when it amputated his finger pad.",0
An employee was unloading a three-foot I beam onto a work table. The I beam slipped out of the employee's hands and the employee's right middle finger was caught between two I beams.,1
An employee was carrying a box of supplies (approximately 10 lbs.) and became dizzy and fell causing a hip injury that required surgery.,1
An employee slipped on ice in the parking lot and fell breaking her right hip.,1
An employee was lifting propane bottles and suffered a pinched nerve in his back.  The employee was hospitalized.,1
"On February 24, 2017, at 6:56 a.m., an employee fell on the snow covered sidewalk while walking into work and fractured the left femur.",1
An employee slipped on a wet floor while she was mopping it and fell breaking her right wrist.,1
"On February 24, 2017, a temporary employee was using tongs with his right hand to remove the hot metal/stamped piece from the point-of-operation on the forging punch press and placed it on the nearby heat belt (conveyor). Then, the employee sprayed the point-of-operation with his left hand holding the sprayer bottle. The employee reached into the point-of-operation with the sprayer bottle and his left hand was caught and crushed by the closing dies of the forging punch press. His left index finger was amputated at the middle knuckle.",0
"While working on the air conditioning on a new home construction, an employee fell off an eight-foot ladder suffering a compression fracture of the L1 and L4 vertebrae. The employee was hospitalized.",1
"An employee was using a MIG welder to make a permanent weld on the cap of a large cylinder (weighing 2,700 pounds) that was rotating slowly. The large cylinder then tipped and fell onto the employee, injuring his pelvis and requiring surgery.",1
"An employee opened the cleanout on a screw conveyor that had stopped. As he was removing the super sack string that had bound it up, the screw conveyor continued turning and amputated his right ring finger.",0
"An employee was descending the stairs of a drilling rig to take his break when he slipped and fell, suffering bruising.",1
An employee was changing out a screen on the extruder and received second and third degree burns on the neck and face from the heated polypropylene (240 to 280 degrees C). The employee was not using PPE at the time.,1
"An employee was walking backwards while pulling a cart full of coolers into the facility, tripped over a mat, and fell breaking four ribs. The employee was hospitalized.",1
An employee was building an iron box stand for hunting. The box stand slipped against the angle iron clipping the tip of his left pinky finger and causing a partial amputation.,1
"On 2/24/2017, an employee was changing out the hangers that hold up piping inside the pump room. As he grabbed the material, his right pointer finger was caught and crushed between the top piece of the hanger and the pipe, requiring hospitalization.",1
An employee was inspecting the strip at the slitter machine. He turned and his hand struck the edge of the strip causing a 1/2 inch laceration on his hand. The employee was hospitalized.,1
An employee was pushing a vehicle that had broken down into a parking space and out of traffic. The employee fell and hit his head.,1
"An employee was transferring a cylinder from its rack to a cylinder cart. As he was holding the cart's locking arm, his gloved left index fingertip was pinched and partially amputated between the locking arm and the resting block.",1
An employee was operating a saw on 2-24-2017 to cut melamine board/particle board and amputated the left middle finger. The saw was guarded at the time.,0
"An employee hit an object under the snow while skiing. Their left ski fell off, causing him to lose balance and fall onto their left side striking a rock. The employee's left femur was fractured.",1
"An employee was cranking the handle to land the support jacks on an over-the-road trailer she was parking when the handle broke, causing her to fall and break her hip. She was hospitalized.",1
An employee was helping to disassemble a meat extrusion machine to clean it when the machine unexpectedly activated. The slicer engaged and amputated the employee's left pinky finger.,1
An employee was adjusting a saw assembly on a machine when the saw blade amputated his left index fingertip to the bone. The saw was online at the time of the incident.,0
"An employee was standing next to a bore pipe observing the work. An excavator was being used to pull an auger bit out of the bore pipe. A chain was attached to the excavator to pull the auger sections. While the excavator was pulling the auger, the chain failed and whiplashed into the employee's face. The employee lost the left eye and suffered a right orbital socket fracture.",1
"An employee was cleaning the rollers that apply chemical treatment and paints to metal coils when his hand was caught in the metal coils. His right pinky finger, ring finger, and thumb tip had to be surgically amputated.",0
"An employee slipped on ice on the sidewalk and fell, suffering a fractured hip that required surgery and hospitalization.",1
"An employee stepped into a hole and fell 14 feet while welding on an I-beam, fracturing the right shoulder and tailbone.",1
"An employee was checking flow rates on a material pump. As he descended from the pump platform, his wedding band was caught on an exposed machine screw head. The band pinched and partially amputated his ring finger.",0
"An employee was fixing a water leak in the attic at a customer's home when he fell 9 feet through the attic to the wooden floor, breaking his right wrist and requiring hospitalization.",1
"An employee was feeding wire mesh into a rotary shear when the employee's right hand was pulled into the shear blade, amputating the index finger and damaging the thumb.",0
"An employee was putting a label on a box. When he stood up, he felt dizzy and blacked out. He fell backwards and hit his head on the concrete.",1
An employee was on foot patrol and suffered a heat related injury/illness.,1
"An employee was working on a paper machine and smashed his middle finger in the machine, resulting in surgical amputation.",1
"An employee was driving a forklift when he struck the forks of a stationary forklift and injured his left ankle tendon, requiring surgery and hospitalization.",1
"On February 26, 2017, an employee was driving a forklift and was turning around in a small area. There was another forklift that was non-operable in the same area. The employee backed up the forklift and struck the forks of the non-operable forklift. The forks penetrated the employee's right heel and tore tissue from the bone.",1
"An employee fell while pushing a dolly, breaking his leg.",1
An employee was attempting to unclog and then reattach a hose. Her left hand was in the pour hole when the machine cycled and a finger was crushed by the ram resulting in a fingertip amputation.,0
"An employee was stepping over a guardrail, tripped and fell resulting in a broken right arm.",1
An employee was cleaning out the grain bin while the auger was running. The employee was caught by the auger and suffered a right leg injury that will need surgery.,1
"An employee was preparing a pallet with a pneumatic nail gun when the air hose became wrapped around his right leg. While trying to unwrap the hose from around his leg, the nail gun engaged and struck the back of his right foot.",1
"An employee was removing the final portion of a tree stump utilizing a pull rope and a vehicle. The rope broke under tension resulting in a large recoil that struck the employee on the right cheek. The employee suffered fractures to the eye socket, abrasions, and contusions. The employee was hospitalized.",1
An employee was working on a plank on an elevated surface 6' from the ground. The plank broke and the employee fell to the ground resulting in a compound fracture to the left leg.,1
An employee was working with a table saw and amputated his thumb and index finger.,1
"An employee was pressure washing rig equipment. As the employee was removing the guard to trouble shoot the pressure washer, his gloved hand was pulled into the pulley and belt system resulting in a partial amputation to the right ring and middle fingers.",1
An employee was walking out of a trailer to his forklift when another forklift struck him and fractured his leg.,1
An employee fell through a skylight and sustained a dislocated shoulder and a broken lower leg and ankle.,1
An employee was assisting in the removal of roller chain that had jammed a gear box. The chain popped suddenly and struck the employee's right thumb fracturing it.,1
"On February 27, 2017, an employee suffered a neck and back strain that required hospitalization while attending to a resident.",1
"An employee was working in a bucket truck in the high voltage substation testing high voltage cable. The employee contacted a live buss at 13,800 volts resulting in burns to both palms, neck, and right thigh.",1
"An employee was shoveling dirt around a gas main pipe in a trench approximately 5' x 8' x 5'6"" deep. A section of the trench caved-in breaking the employee's left ankle.",1
An employee was walking in the warehouse area and his knee buckled causing his leg to twist and injure his right femur and hip.,1
The employee was assembling a pneumatic activated butterfly valve assembly.  He also attached the air source to it. As the employee was reinstalling the valve his right thumb was inside the valve assembly. The valve activated pinching the employee's right thumb tip resulting in amputation of the thumb tip including bone and the nail.,0
An employee was loading an aircraft when she was struck by a dolly being used by another employee. The dolly struck her left foot causing her to fall and fracture her left wrist.,1
An employee slipped and fell while closing a bay door with a hook/rod resulting in a spiral fracture to the right tibia.,1
An employee was sawing plywood using a table saw and amputated the left index and middle fingertips.,0
"An employee of another unit was moving bar stock with a forklift when it became stuck as he went through a doorway. The injured employee was helping to move the bar stock and when the forklift lowered, the bar stock fell onto the injured employee's hand amputating his middle finger.",0
"An employee was climbing a ladder, slipped and fell off resulting in a broken left leg.",1
"An employee was sweeping off the roof, slipped on ice and fell 13 feet to a lower level. The employee sustained broken ankles and a broken wrist.",1
An employee was using a meat-cutting saw and amputated her left middle fingertip.,0
An employee was riding a horse at the worksite and fell resulting in a broken tibia.,1
"An employee was operating a forklift, carrying an aluminum billet. Another employee was acting as a spotter for the forklift driver. The forklift operator placed the aluminum billet onto the storage rack and began moving away from the area. As the forklift operator was moving back from the area, the forks of the forklift caught another aluminum billet. The aluminum billet rolled off the storage rack and struck the employee who was acting as a spotter. The employee suffered a broken tibia and fibula. The employee was hospitalized for surgery on the broken leg.",1
An employee was manually moving steel plates and caught a finger in a hole in the steel plate resulting in a fingertip amputation.,0
An employee was hospitalized with a laceration to the left brow area after falling approximately 3 feet to the ground from a pole that he was climbing.,1
"An employee was unloading at a customer location when the product became plugged with pressure still on the pneumatic trailer. The employee removed the 6"" fill line cap, causing the pressure to release and the cap discharged into the employee's chest knocking him to the ground. The employee sustained fractured vertebrae, bruising to his chest, and a head contusion.",1
"While an employee was working on a utility pole to run a TV cable to a house, the pole broke and the employee fell about 15 feet to the ground. The employee sustained a broken left femur and a lower back fracture.",1
An employee was removing excess material from the blade of the 90 degree saw and amputated the right ring finger.,0
An employee was unloading blocks when his leg got caught in the groove of the block as it lifted resulting in a fractured left tibia and fibula.,1
An employee was operating a punch press and amputated four fingers on the left hand.,0
An employee fell down the stairs and broke her hip and femur.,1
"An employee was assembling a trench box when his finger was caught in a pinch point between the spreader and another trench box shield, resulting in the amputation of two fingers.",1
An employee was operating a Komatsu Dozer and fell off. The dozer ran over his left arm and fractured it. The employee also sustained a wrist injury and two broken ribs.,1
An employee was preparing to clean a machine when their arm was caught in the rollers and fractured. The fracture will require surgery.,1
An employee was working in a cage attached to a forklift approximately 18 feet in the air. The attachment fell and the employee suffered a fractured jaw.,1
"An employee was moving a waist high, three foot long freezer to clean behind it. She was using the handle on the freezer to pull it away from the wall when her hand slipped off the handle causing her to lose balance and fall to the floor. She fractured her pelvis in two places.",1
An employee fell from the second rung from the ground on an aircraft ladder and suffered a head injury.,1
An employee was cleaning near the fryer conveyor belt and made contact with the sprocket amputating the right middle finger at the first knuckle.,0
An employee was sorting packages and felt back pain.,1
"While one student operated the controls, another welding student lifted up the rubber flap on the rear side of the hydraulic metal shear to trim a small piece of metal. The student's left index fingertip was amputated during the process.",0
"While climbing a six-foot ladder, an employee was on the 4th rung carrying a water supply line to be installed and was facing towards the building when he was struck by a Bobcat that was backing up. The employee fell off the ladder and was pinned between the ladder and the Bobcat.",1
"On February 27, 2017, at approximately 12:40 PM, an employee was assembling a scaffold and fell from the scaffold. The employee was hospitalized for a herniated disc.",1
"On 02/27/2017, an employee fell off a ladder from a height of approximately 11 feet, sustaining a head injury that required hospitalization.",1
An employee fell out the driver's side door of a truck and fractured a hip.,1
An employee was cleaning on a six foot step ladder and fell hitting his head on a pallet of wood. The employee sustained a laceration and possible fracture to the right side of his head.,1
"A forklift operator was checking the security of his load when he hit his head on one of the forklift tines, resulting in a head laceration and neck trauma. The employee was hospitalized.",1
An employee was uncoiling steel from a reel when his foot got caught and twisted resulting in a fractured left fibula and torn ACL.,1
An employee was welding side rails together for a ladder. The rails slipped and pinched the right pinky fingertip resulting in a partial amputation.,0
"An employee was de-burring a piece of flat steel on the abrasive disc sander when his hand was pulled in behind the tool rest, trapping his left thumb between the piece of steel and the abrasive disc. The top of his left thumb was sanded down to the bone.",1
The injured employee was helping another employee remove a three foot concrete wall from a hoist. When the wall was removed from the hoist it became unstable and fell onto the injured employee's right foot fracturing it.,1
An employee was working on the paint line when the employee's right index finger was injected with paint by a stationary pain gun. The high pressure injury will require surgery.,1
An employee was moving steel from one location to another and broke a leg.,1
"Employees were drilling holes to obtain geotechnical soil samples on a cold day. An employee's jacket was caught in the auger, pulling him into the auger and breaking his ribs and arm.",1
"An employee was guiding two wooden utility poles supported by a winch when one pole struck a pole lying flat. This caused one of the two supported poles to shift, slip from the restraints, and fall striking the employee's right foot and fracturing a toe.",1
An employee was working on a scaffold and fell approximately 15 feet. The scaffold fell on top of him when he landed on his back.,1
An employee was putting on his apron while holding a deboning knife. The knife slipped and the employee attempted to catch the knife and cut his abdomen.,1
"While walking across the parking lot from the shipping office to his truck, an employee was struck by another truck resulting in cracked ribs on the left side and a left leg injury above the knee.",1
An employee had de-energized an HVAC unit in order to adjust tension on the belts. Ambient air flow caused the blower wheels to rotate and the employee's left middle finger was caught between the blower wheel and belt resulting in an amputation of the fingertip.,1
"An employee backed the shuttle bus into its assigned parking spot. The employee then opened the bus door and exited the vehicle, however, the vehicle was still in reverse. The bus continued to reverse and the bus door struck the employee, knocked him to the ground, and a tire ran over his right leg. The employee suffered a broken tibia and fibula and was admitted to the hospital for surgery.",1
"An employee was trimming a tree when a branch fell, bounced up and struck him in the chest, resulting in two fractured ribs and a bruised lung.",1
An employee fainted and fell out of a chair onto the concrete floor suffering back and neck injuries.,1
An employee was hospitalized for a hip fracture after breaking up an altercation between two hospital visitors.,1
The employee was using an air wand to spray off excess shot from the steel beam. The steel beam rolled over onto the tip of his right middle finger causing a fingertip amputation.,0
An employee fell from the third scaffold level to the ground below resulting in a fractured and dislocated finger.,1
An employee fell approximately 10 feet from a mezzanine to the concrete ground below resulting in a broken hip and elbow.,1
An employee was walking down a flight of three stairs from the client's home into their garage when she missed the last step and fell. She was hospitalized for a fractured tibia and fibula.,1
An employee was hospitalized for carbon monoxide poisoning while working at a construction site.,1
An employee was cutting the strapping on a bundle of steel square tubing. The bundle was approximately waste high and stacked on top of other material cribbed by 4'x 4' lumber. The bundle fell onto the employee when the last retaining band was cut breaking the employee's right leg.,1
An employee was struck by a forklift injuring his hip and fracturing his leg and foot.,1
A worker was on the seventh or eighth rung of a 10-foot ladder and fell resulting in a broken rib and a bruise to the head.,1
"An employee was moving a piece of steel plate with a hoist. The steel plate swung into the employee's lower left leg, fracturing it.",1
"An employee was punching out a small piece of metal on a hydraulic ironworker when a piece of metal flew off and lodged in the employee's neck, requiring surgery for removal.",1
"An employee received an electrical shock when he made contact with a 277V circuit. At the time of the incident, the employee was relocating a 2' x 4' ceiling grid light fixture using an 8-foot A-frame ladder.",1
"The injured employee (Operator 1) was assisting another employee (Operator 2) in die stamping operations at the press. Operator 1 was standing at the press and to the inside of the light curtains installed at the press, but was not in an area that triggered the light curtains to work (i.e. the light curtains did not extend all the way to the die bed of the press). Operator 2 triggered the press to cycle and Operator 1's right hand was in the press and caught by the upper die. As he stepped back he triggered the light curtains which caused the press to rise back up. The employee's right fingers were fractured.",1
"On March 1, 2017, at approximately 3:00 a.m., an employee was injured while visually checking a belt drive in the Thistle Area. A jam had occurred in the crusher. The machine was locked out, the jam was cleared, and the machine was started back up. The employee gained access to a catwalk and knelt down to check the tightness of the belt drive when his knee made contact with a piece of metal causing him to react by throwing his hand out. His gloved hand made contact with the unguarded, moving belt drive resulting in a fracture and amputation of the left ring fingertip.",0
"An employee was cleaning a spray dryer, at or near the rotary valve, and amputated fingers on the right hand.",0
An employee tripped on a rug and fell. The employee was hospitalized for a concussion and left knee injury.,1
An employee was shot by an armed suspect while working his shift.,1
"While performing auto body work on a pickup truck, an employee was standing on the bumper and fell off fracturing his ankle.",1
An employee cutting trees around a service line received multiple bee stings and was hospitalized.,1
"An employee was delivering a 55 gallon drum. The drum was lying on its side in the trailer. As the employee was trying to steady the drum, it shifted and caught his right hand resulting in amputation of the right pinky fingertip.",0
"An employee was performing maintenance on a leveler machine. He was aligning the machine lid to put it back on, holding the lid with his right hand and his left hand was on the machine in a pinch point. As he was aligning the lid, it fell onto his left hand. The employee sustained broken bones and damage to blood vessels and nerves to his left ring and pinky fingers. The employee was admitted to the hospital and had surgery to pin the bones in his fingers.",1
An employee fell off a ladder landing on his back. The employee was hospitalized for injury to the ribs.,1
"On March 03, 2017, at approximately 5:10 PM, an employee was operating a truck vacuum. The employee exited the truck to see if he was positioned correctly. While at the back of the truck, the truck started to roll backwards pinning him against a pipe. The employee suffered bruising and trauma to both legs (no fractures).",1
"An employee drove a high lift single operator cherry picker from the roadway onto the soft earth of a drainage ditch to avoid oncoming traffic. The uneven surface caused the employee to be thrown around the basket. The employee was wearing a safety harness and was not ejected, but received a severe laceration on his lower leg from contact with the basket guardrails.",1
"An employee was operating a machine (similar to a wood lathe) when he noticed a sound suggesting a loose belt. While troubleshooting, his fingers were caught in the pulley and crushed.",0
"On March 01, 2017, a forklift driver was trying to lift a base pallet so the injured employee could place a 4X4 wooden board under it. The forks slipped off the base pallet and struck the employee's jaw. The employee suffered a broken/dislocated jaw.",1
An employee was attempting to open a jammed door to the machine room with both hands. The employee fell backwards onto the concrete floor fracturing his right wrist.,1
An employee was operating a mechanical power press and amputated the right index fingertip.,0
An employee was operating the trimming machine and amputated the right index fingertip.,0
An employee was clearing a jam from the crystallizer machine when her hand was caught in the rotating throat resulting in amputation of her hand. The machine was not locked out at the time.,0
An employee slipped on the ice and broke her ankle.,1
An employee was checking the belt on an AC unit when the belt suddenly turned on and amputated part of his right middle finger.,0
An employee was training on the stand-up forklift and lost control. The forklift struck a building beam resulting in amputation of the employee's left foot.,0
An inmate suffered the amputation of two fingers when they contacted the running belts of an air handling unit.,0
"On March 1, 2017, an employee fell from a rolling ladder and fractured her hip.",1
"An employee was trimming tree branches on the ground with a chain saw. The employee tripped on a tree branch while operating chain saw, causing the chain saw to kick back and strike him in the face. He received a laceration to the right eye and cheek.",1
"An employee was pressure washing the hull of a vessel, slipped on the wet surface and fell to the concrete deck below fracturing the left elbow.",1
An employee fell off a three-foot high stand during production. She hit her head and was hospitalized for a laceration on her skull and a sub-arachnoid hemorrhage.,1
An employee was using a chop saw to cut a pipe. The pipe was wet and his hand slipped from the pipe up into the saw blade. The employee's left index finger was amputated at the first knuckle and the left middle finger was lacerated.,0
"An employee was lifting a hatch to gain access to the underground area. As he was lifting the hatch, his right pinky finger was caught between the hatch and the ground amputating it at the first knuckle.",0
"An employee fell approximately 25 feet from a section of a roadway bridge during remodeling. The employee sustained fractures, contusions and a concussion.",1
"An employee was under a conveyor to retrieve a bird in live hang and caught their right hand in an unguarded, moving chain and sprocket resulting in partial amputation of the right middle, ring, and pinky fingers.",0
An employee injured his right hand when it was caught in the moving parts of a router during flooring installation.,1
An employee was walking in the parking garage and fell down the stairs resulting in an elbow injury that required surgery.,1
"An employee was cutting down a tree. When the tree fell, the base of the tree struck the employee resulting in a fractured pelvis, a collapsed lung and two broken vertebrae.",1
"An employee was walking out the east entrance door, slipped on ice that had accumulated on the sidewalk and suffered a sprained groin.",1
An employee was hospitalized for dehydration after spreading grass seed.,1
An employee was using a magnetic drill when the drill became de-magnetized and fell striking the employee's left foot.,1
"An employee was making his weekly propane delivery. He connected a hose and refilled the first of two tanks. When he disconnected the hose, a fire occurred and the employee received second degree burns to both arms and the left side of his face.",1
"An employee was unloading a shipment of totes from a delivery truck. While the employee was putting the last tote onto a cart, the cart's leg broke, causing the totes to fall off of the cart and land on top of the employee.",1
"On March 02, 2017, an employee was at a customer site attempting to remove a tire from a forklift. While removing the lug nuts, the tire exploded severing the employee's left thumb, below the knuckle.",0
An employee tripped while stepping backwards and fell fracturing a hip.,1
An employee was using a knife to trim plastic. The knife slipped and punctured the employee's left hand. The employee was hospitalized for treatment.,1
An employee was clearing the pie chunker of loose debris. A blade energized while his left arm was in the machine resulting in amputation between the shoulder and elbow.,1
An employee was moving a truck tire out of the street after it had fallen off of his truck. The tire fell onto the employee breaking his hip.,1
An employee was attempting to remove paper from between rollers on the manufacturing line. The employee's glove got caught in the rollers pulling her left arm into the rollers resulting in tissue damage to the arm.,1
An employee was stacking pallets in a trailer and stepped on a broken pallet puncturing his right foot.,1
Employees were in the process of connecting gas to a fire pit. The gas accumulated underneath the access door where the injured employee was monitoring it. A flash fire occurred and the injured employee sustained first degree burns to the face and second degree burns to the left elbow. He was admitted to the hospital.,1
"Employees were building the stairs to the loft area in a barn. The injured employee was carrying a piece of housewrap in front of him and fell 14 feet through the stairs that were under construction. The stairs did not have guardrails at the time. The employee suffered three broken ribs, a fractured hip and internal bleeding. His spleen had to be removed.",1
"On March 02, 2017, an employee was struck by a forklift in the yard. The employee sustained fractured bones in the leg and ankle.",1
An employee was moving a table (on rollers) that was loaded with square tubing into his work area. The square tubing shifted and a piece rolled and smashed right thumb.,0
"An employee was driving a tugger back to the loading area. When the employee turned a corner the train he was pulling jack-knifed. A forklift driver was straightening the tugger. As the employee was opening the pintle hitch, the forklift driver was lifting the cart and pinched the employee's left index finger resulting in amputation of the fingertip.",0
An employee was closing a guard over a machine when the guard slipped out of his hand and pinched his hand between the guard and the slicer resulting in amputation of the right ring fingertip.,0
"An employee was about to weld a piece of cable from the east side cable to the west side cable. The west side was already clamped off and the employee was putting the east side into the clamp on the cable welder. As he was lowering the guard, the clamp guard actuated catching his right middle finger in the clamp and amputating the fingertip.",0
"An employee was helping another employee lift a furnace door weighing approximately 1,500 lbs. using a forklift. The door fell off the forks and onto the employee's foot.",1
"On March 2, 2017, at approximately 6:15 a.m., an employee was walking to his assigned van in the parking lot at the beginning of his workday when he slipped on the ice and fell hitting his head on the van as he fell. The employee sustained fractured vertebrae.",1
An employee sustained a laceration while operating a centrifugal machine.,1
An employee was working on a strapping head when his right middle finger was caught in the strapping head and amputated.,1
An employee was loading a cream truck. The employee was getting all of the liquid out of the line when his finger was sucked into the hose causing the valve to close and amputate the tip of the left index finger.,0
An employee was using a table saw to cut a 24-inch by 15-inch section of plywood to make a battery floor and amputated his left index finger just below the second knuckle. The employee also sustained a laceration to his left thumb and middle finger.,0
An employee was climbing down a 6-foot step ladder after cleaning the interior wall of a trailer when the employee's left knee gave out and he fell fracturing his right femur.,1
"An employee was removing a finished part from a CNC lathe. With his hand on the part, he inadvertently stepped on a foot control that actuated a hold down ram. The ram came back in on the part and amputated the upper portion of the employee's right thumb.",0
"An employee was walking past a waste trommel and lost his footing. He grabbed for the machine and the machine grabbed his glove and pulled his hand in resulting in amputation of the left index, middle and pinky fingers.",0
An employee was removing rubble from the tailgate of a dump truck when his hand was smashed in the tailgate resulting in amputation of the left ring finger.,1
"The power had gone out in the community that morning and was expected to be out for several hours. The injured employee was collating materials for an upcoming class. The injured employee asked another employee to help her sort through boxes of materials in the storeroom. There was an emergency light on in the storeroom and the co-worker grabbed a large flashlight to add additional light. As they were sorting through the boxes, the injured employee stepped out of the lit area and fell over a piece of equipment suffering a strained back and fractured pelvis.",1
An employee was removing a wall form away from the scissor lift. The scissor lift dropped after it was freed pinching the employee's finger.,1
An employee was cleaning and sorting a toy bin. The employee tripped over the bin and fell breaking the right hip.,1
An employee was building a pallet when his foot got caught up in the nail gun hose while he was holding the nail gun with his finger on the trigger and a nail shot into his right heel.,1
"An employee was walking in the parking lot, tripped over landscaping rocks, and fell breaking and dislocating the humerus.",1
"The employee was moving a manifold via three portable pipe stands when one of the stand's casters got stuck in a divot in the cement floor. As the employee attempted to push the manifold from the first stand, the weight of the manifold became unevenly distributed causing the manifold to fall from the pipe stands. The employee's finger was caught between the pipe stand and the manifold resulting in the amputation of the employee's first digit of the right thumb.",0
An employee was throwing a 4-inch cast iron pipe into a garbage dumpster. The dumpster was full and the pipe came back and smashed his left hand ring finger. He was hospitalized for a severed tendon in the finger.,1
"An employee was making neon signs. He was glass pulling, attained a vacuum in the tube, and pumped the tube with neon. The employee was charging the sign with electricity to check the level of illumination. The employee was trying to attain 300 milliamps in the tube. During bombarding, the milliamp meter malfunctioned and the employee tried to troubleshoot. An arc flash occurred and the employee was shocked and burned on his arms and hands. He also received a laceration to the right elbow and bruising on the right hand.",1
"Employees were on lunch break and looking at a .22 caliber pistol. When the gun owner was putting it back in the truck that was in the company parking lot, the gun discharged injuring a fellow employee in the abdomen.",1
An employee was adjusting the hydraulic pressure setting on a 1200- ton die casting machine when a component of the machine broke free and struck the employee in the face resulting in injuries requiring hospitalization. The employee sustained a fractured eye socket and a fracture to the back of the head.,1
"The employee stepped onto a portable staircase to retrieve a product from the second tier on a rack. The portable staircase's wheels were not locked down. As the employee stepped onto the first step, the staircase slid out from under her and she fell hitting her head on the floor.",1
An employee was standing under a net drum waiting to receive fishing nets to work on fishing lines when a basketball hoop that was previously attached to the net drum fell over and struck the employee's right jaw and neck area. The employee suffered a fractured jaw and was hospitalized.,1
An employee was descending a baker's scaffold from a height of approximately 4 feet 9 inches. The employee fell from the scaffold ladder to a concrete floor and suffered a head injury. The employee was admitted to the hospital.,1
An employee was unstrapping a load of wooden components at a job site. While removing a strap one of the components fell off the truck and landed on the employee's right leg resulting in a broken ankle.,1
"An employee was monitoring the laminating machine. The machine's electrodes were stuck in the up position. When the employee removed the guard from the running machine and used a metal broom stick to push the electrodes down, he received an electrical shock on the right arm.",1
An employee was using a blender and as he pushed cilantro into the blender he suffered the partial amputation of his right middle and index fingers.,0
"While attempting to contact a potential customer, an employee was chased by a dog. While running away, he fell and broke a leg.",1
An employee suffered a toe amputation when his foot was caught between the roller and the sheet.,0
"On 3/3/17, two employees were lighting the Stabilizer Reboiler Heater (21-H-205). An internal vapor ignition impacted the heater integrity and both employees that were in the process of lighting the heater were injured. One of the employees was admitted to the hospital for further treatment of burns to the face.",1
An employee was picking cartons of merchandise and placing them on a conveyor. The employee lost control of a box and several boxes fell over and struck another employee on the head resulting in a concussion.,1
"An employee was unloading scaffold planking from a truck when the load shifted and a plank fell striking the employee's back. The employee suffered a spinal injury, broken jaw and bruises.",1
An employee was using a hydraulic press to cut bearing parts and crushed two fingers.,1
An employee was unjamming a bagger machine and lacerated the left index finger requiring overnight hospitalization. The machine was not locked out or tagged out at the time.,1
An employee was sitting in her chair. When she stood up she tripped on computer cables and cords and fell fracturing the left femur.,1
An employee was climbing a portable extension ladder to work on a hatch in the ceiling. The ladder slipped out from underneath him and the employee fell 8-10 feet resulting in a broken leg.,1
"An employee was performing a ""rope shortening"" operation on a freight elevator. One of the six suspension wire cables broke and a section of the wire cable fell onto the employee on top of the elevator car. The employee was hospitalized for a bone fracture.",1
"On March 3, 2017, an employee sustained amputation injuries to the right hand after coming in contact with the shell auger. The shell auger moves eggs shells from production to a load out trucking area.",0
"On March 3, 2017, at 11:00 a.m., an employee was completing a merchandise delivery when a male on a bicycle rode up to the delivery box truck and fired 8 rounds at the truck, three of which pierced the employee in the arm and pelvic area. He was hospitalized.",1
"An employee was operating a table-top miter saw when his glove got caught in the saw blade, pulling his left fifth finger into the saw blade. A physician later amputated part of the employee's finger.",0
An employee fell from a 10-12-foot extension ladder and hit his head while performing maintenance work on malfunctioning equipment in the hospital.,1
An employee amputated fingers on his left hand while using the 12-ton pneumatic brake press to attach a blanket to a U-shaped bar.,0
An employee was repairing a wood pallet and struck his knee with a nail from a nail gun.,1
"Three employees were lifting a steel plate onto a truck trailer. As the employees lifted, one employee fell to the ground. He suffered a broken hip and was hospitalized for treatment.",1
An employee was troubleshooting a paper jam on a machine and amputated two fingers.,1
An employee was touching up vehicles and as he was walking he tripped over one of the curbs outside in the ready lot and fell onto his left arm. The employee sustained a left elbow injury.,1
An employee was operating the ARP system when their shirt and arm got caught inside the moving system. The employee was hospitalized for a laceration and tendon damage to the arm. The equipment was not locked out at the time.,1
"An employee was climbing a portable 12 foot ladder up to a one story residential garage roof when the ladder slipped, causing the employee to fall to the concrete driveway and break both heels.",1
An employee was helping load a compressor onto a forklift. The back tire of the forklift ran over his right foot resulting in a broken leg.,1
An employee was working in the concession stand when a small grease fire started. The employee had difficulty breathing due to the smoke from the fire.,1
"At approximately 8:25 a.m. on 3/4/2017, an employee was working on top of the cooling conveyor while cleaning the oven conveyor. The cleaning hose became caught in a gap between the oven roller and the conveyer unit and wrapped around his foot pulling both feet and lower legs into the gap. The employee was caught in and struck by the oven roller. The employee was admitted to the hospital with multiple fractures.",1
"An employee was performing fire watch duties and fell approximately 12 feet to the concrete floor. The employee was hospitalized for brain contusion, broken ribs, a collapsed lung and broken vertebrae.",1
An employee was adjusting a belt on the machine and dropped a tool onto the moving belt. When the employee attempted to retrieve the tool his left arm and hand were caught between the belt and a weight roller resulting in burn injuries to his arm and hand.,1
An employee was pouring flour into a vat. The bucket slipped from the employee's hand and fell into the vat. The employee tried to pull the bucket out of the vat and suffered a left ring fingertip amputation when the finger was caught between the lip of the vat and the bucket.,0
An employee was teaching an advanced ski lesson and struck a tree injuring the left knee and breaking the left femur.,1
An employee was working at a pack station when they experienced itching hands. The employee was working with cardboard boxes and an unknown product that was being packed. The employee was admitted and diagnosed with acute anaphylaxis.,1
An employee sustained multiple stab wounds from a person who entered the store with a knife.,1
An employee was cutting the bolt heads off carrier flights of conveyor chain when the oxygen hose on the torch unit sprung a leak and the oxygen ignited. The employee's shirt caught on fire and the employee was burned on the left side of his chest.,1
"An employee was walking, slipped on a plastic bag and fell. The employee dislocated the right shoulder and broke the left shoulder.",1
An employee was opening an oven door in the paint department to expedite cooling. The employee entered the door to Stage 1 and 2 and the vacuum system in the oven sealed the door making it difficult to open. The employee was burned on the hand when he tried to exit the oven. The oven reached a temperature between 300 to 400 degrees Fahrenheit when in operation. It had been turned off for approximately one and a half to two hours at the time of the incident.,1
An employee was transferring product from a top tote tank to the bottom tote tank when the leg of the top tote tank shifted causing the top tote tank to pinch the employee's right thumb between the top tote tank and the bottom tote tank spark arrestor. The employee suffered a partial amputation to his right thumb.,1
An employee was looking upward to find the source of an air leak when he stepped off the six inch platform and fell breaking the right tibia.,1
An employee was driving a golf cart and collided with a container trailer chassis. The employee was pinned beneath the chassis and was hospitalized for his injuries.,1
"An employee was standing on a 12 foot portable step ladder to change a light bulb. While descending the ladder, the employee lost his footing and fell approximately eight feet to the concrete floor below. The employee sustained a compound fracture to the lower left leg.",1
An employee was operating a sheet folding machine and received a laceration and crushed three fingers on his right hand in the machine's chain. The employee was subsequently hospitalized as a result of his injuries.,1
An employee tripped over a floor mat at the cashier station and fell breaking a hip.,1
"On Monday, March 6, 2017, at approximately 1:30PM, an employee was operating a tractor when the tractor rolled over trapping the employee underneath. The employee's lower left leg was fractured.",1
"An employee was attempting to move a conveyor back into its original position after moving it to grease a bearing on an adjacent conveyor. The employee grabbed the bottom legs of the conveyor and tried to pull it back into place. As he pulled on the bottom leg of the conveyor, the top end of the conveyor tilted or rocked which allowed his right gloved hand to travel down the conveyor leg and was smashed between the base plate of the conveyor leg and the floor amputating the fingertip.",0
"An employee was walking on the grating when he slipped and fell. The grating gave way, causing the employee to fall an additional five feet. The employee landed on his legs fracturing the right leg in three places.",1
An employee was cutting a section of a six foot I-beam and placed it on the material cart. The employee's left hand was caught between the I-beam and the cart resulting in amputation of the middle fingertip.,1
"An employee was attacked by a customer while working in one of the aisles. The customer cold cocked, kicked and broke two wine bottles over the injured employee's head. The employee suffered a concussion, bleeding on the brain and head lacerations.",1
An employee was on the roof of an apartment building repairing a leak and fell off. The employee was hospitalized for broken ribs and a cracked bone in the lower back.,1
An employee amputated the right index fingertip while cleaning a deli meat slicer.,0
An employee was operating a machine and amputated the right middle fingertip when it was caught in a screw while trying to remove a piece of plastic.,0
An employee was moving packages when their left foot was run over by a PIT and fractured.,1
An employee was moving an attachment member and got his left index finger caught between the attachment member and a dolly cart resulting in amputation of the finger.,0
An employee was measuring a piece of steel and amputated the right pinky fingertip.,0
"An employee was installing a dust collector air seal. As the employee was hooking up the air lines, he touched the rubber seal to verify the seal was engaged and another employee working with the him activated the air (start button). The injured employee's right index fingertip was amputated.",0
"An employee was inside an M-Starter cabinet mounting a bracket to the back panel using a cordless drill. Energized wires were located outside the cabinet along the back panel and an arc flash occurred. The employee received burns to both hands, wrists, and arms and the face.",1
An employee was riding a mill elevator when it got stuck between the third and fourth floor with the doors in the open position. The employee was found at the bottom of the elevator shaft with a skull fracture.,1
An employee (basketball player) sustained a fracture to his left tibia when his leg came into contact with the leg of a player from the opposing team while engaged in court play. The employee was hospitalized for surgery.,1
Two employees were removing bolts from a flange. One employee was loosening the bolts by hand and another employee was using a pneumatic socket wrench. The wrench has a bar that travels with it and the bar pinched the first employee's finger resulting in amputation of the right index fingertip.,0
An employee was airing a tire inside a cage when the tire blew up amputating two of the employee's fingers.,1
A temporary employee's right hand was caught between two rollers while attempting to unjam a metal part on the roll sorter machine resulting in overnight hospitalization.,1
"An employee was walking out of the facility to make a delivery, tripped and fell breaking three fingers on the right hand and injuring his right kidney.",1
An employee working in the retail sales room fell from a step ladder breaking the left femur and tibia.,1
An employee was loading a bin with catfish feed when the machine clogged. The employee tried to clear the clog and caught their left hand in the rollers resulting in amputation of four fingers. The guard was removed at the time.,1
"An employee's left index finger was caught between the chain and the concrete while unloading a precast concrete box, resulting in amputation of his fingertip.",0
"An employee was replacing shingles on a steep pitched roof. As he was walking across the roof, he slipped and fell approximately 12 feet. The employee's fall protection was not hooked to the anchor point at the time.",1
An employee was snowboarding and struck a tree resulting in a broken leg.,1
An employee was skiing and fell onto his back resulting in injury to the ribs and internal bleeding.,1
"An employee was assisting a client off the bus and twisted her ankle, breaking it.",1
An employee was sweeping in the bun warehouse when they were struck by a forklift and fell to the ground. The forklift operator was carrying a load when the incident occurred. The injured employee sustained a right shoulder injury.,1
"On March 6, 2017, an employee was setting up a press and amputated part of the left index finger.",0
"The employee had just started the Clean In Place (CIP) process on an oven in the further processing area. After the CIP process had been started, the employee added additional caustic to the solution. This caused the CIP solution to splash onto the employee's face and chest. The employee was hospitalized for chemical burns to the face, throat, and upper chest.",1
"On 3/5/17, an employee was walking on a walkway over a tank holding wash fluid (water + alkaline substance) to unclog/adjust spray nozzles. The employee fell through the walkway floor into a tank that was approximately four feet deep. The employee was treated for broken ribs and admitted to the hospital for additional treatment after reporting increased pain and difficulty breathing.",1
An employee inspected a shipment and was retreating from the cooler when a forklift ran over and fractured her foot.,1
An employee fell approximately five feet from a mobile scaffold work platform and was knocked unconscious.,1
"An employee was conducting research and development activities. He was attempting a different recipe for cooking corn using a pressure cooker. He opened the pressure cooker after the gauge returned to zero. After he removed the lid, leftover pressure caused the hot water and corn to splash on him, burning 42% of his body.",1
The injured employee was moving a load of product with a pallet jack on the front loading dock of the building. Another employee was operating a sit down forklift and struck the pallet jack pinning the injured employee's left leg between the pallet jack and the forklift resulting in an ankle injury.,1
An employee was operating a lathe to polish a twenty pound pin. The pin came out of the lathe chuck and struck his left middle finger. The employee was hospitalized for surgery on the fractured finger.,1
An employee was assembling a heat exchanger. He bent over to hand a co-worker a screw and strained his back.,1
An employee was removing a steel caisson tube and lacerated four left-hand fingers when he grabbed the rigging hook and his left hand was caught between the hook and the tube as the tube slid downward.,1
An employee suffered the partial amputation and open fracture of the distal phalanx of the left thumb when an outside door in the loading dock area was caught by the wind and shut on the employee's hand.,0
An employee was lifting packages off the ground and placing them in a chute. The employee was injured when the packages fell down causing him to lose his balance and fall against an exposed screw on the wall. The employee was hospitalized with an arm injury.,1
An employee was lightheaded and dizzy at work. The employee was hospitalized and treated for dehydration.,1
An employee slipped on ice in the parking lot and fell fracturing the left ankle.,1
An employee was attempting to place a core plug into a core at the hard roll towel area and pinched his left middle finger between the core and the core plug resulting in amputation of the fingertip.,0
"On March 08, 2017, an employee's left arm was caught between two molds resulting in a muscle injury requiring hospitalization.",1
An employee was installing a 400 pound cable tray into a skid when his hand was caught between the cable tray and the skid when the cable tray was lowered. The employee suffered the amputation of the distal phalanx on his right pinky finger.,0
An employee's distal portion of the right thumb was amputated while operating the belt sander.,1
An employee was hospitalized when their hand and arm were pulled into a roller.,1
An employee climbed up onto a machine and reached to remove accumulated chicken parts. The right ring fingertip was amputated by the guarded saw blade.,0
An employee suffered an electrical shock while working on high power lines near a transformer.,1
An employee was struck by a backing forklift. His right leg went under the forklift resulting in a fractured tibia and fibula.,1
An employee was training on a stand up forklift/PIT when passing equipment caught his right leg resulting in a compound fracture.,1
An asphalt crew was lifting a piece of equipment when an employee strained his back and injured ribs. The employee was hospitalized.,1
An employee was operating a drill press style mill. The employee's finger became caught between the clamps and the part being worked on resulting in a fracture and loss of the thumb tip.,1
"An employee was performing inventory by placing oil on the shelves when a customer called out to him. The employee turned from his inventory activities and crossed the second bay pit that was partially covered by a wooden pit cover three feet long. When the employee stepped on the cover, it gave way and the employee fell four feet to the bottom of the pit breaking his right femur.",1
An employee suffered a diagonal amputation of the thumb tip while using a paper guillotine.,0
An employee turned the water on and the PVC pipe burst striking him in the face and fracturing his jaw.,1
An employee was walking when a forklift ran over the employee's toes crushing them.,1
"An employee was walking backwards, tripped over a traffic cone in the parking lot, and fell fracturing the left wrist.",1
An employee was parking her forklift and suffered a crushing injury to the left foot resulting in amputation of two toes.,0
"An employee was taping knives on the 60"" metal slitter machine at the entry side of the machine. When the machine was jogged three fingers on the employee's left hand were amputated.",1
An employee was using a ladder to stock items. The employee fell while coming down the ladder breaking the left leg that included knee surgery.,1
"While an employee was moving an 80 lb. grate, the employee fell 15 ft. through the hole in the floor. The employee suffered broken ribs and stitches to his face.",1
An employee fell while walking around a corner in an inside corridor resulting in a broken hip and in-patient hospitalization.,1
"While the employee was walking to the cafeteria, the employee tripped and fell onto the terrazzo floor fracturing the left hip.",1
An employee was working on the roof when a gust of wind blew a loose piece of roofing insulation that struck the employee in the head knocking him down. The employee suffered a concussion.,1
"An employee was critically injured during an altercation at the construction site on March 8, 2017.",1
"At the differential axle line, an employee sustained the amputation of his right ring fingertip while he was training another employee. A push air gun that the injured employee was holding caused an atlas square fixture to spin which caused the amputation.",1
An employee was leaving the premises and walking out the door when a gust of wind caught the door. When the employee tried to grasp the door his left hand middle finger was caught between the door and the doorjamb amputating the fingertip.,1
An employee was lubricating a machine and amputated the right index fingertip.,0
The employee was sitting on a pumping unit walking beam trying to attach the horsehead. The horsehead struck the employee causing him to fall over 9 feet onto the lower portion of the pumping unit resulting in a fractured pelvis and fractured facial bones.,1
An employee was walking in the yard and was struck by a delivery truck resulting in a back injury.,1
An employee was working on a wall and using a positioning device when his anchor point failed causing the employee to fall approximately 11 feet six inches to the lower level. The employee suffered a fractured left wrist.,1
An employee was admitted to the hospital after an allergic reaction to the chemicals in joint cement.,1
"The employee was removing a hose from a tank of water/oil mix that was approximately 226 degrees Fahrenheit to use in another location. The valve was open when the hose was removed resulting in the hot liquid spraying out under pressure onto the employee. The employee suffered second and third degree burns to the face, neck, stomach, and both arms.",1
"An employee was changing the oil on a vehicle. When he started the engine to check the oil pressure, he heard a noise coming from the engine. As he investigated, his right hand contacted the radiator fan lacerating the index, middle, and ring fingers.",1
An employee was gathering her things to leave when she turned and fell breaking her right hip.,1
The injured employee was acting as a spotter for the skid steer operator. The skid steer jumped forward and ran over the spotter's foot. The employee was hospitalized for a fractured foot.,1
"The injured employee was helping the apprentice install 6 inch rigid conduit. The injured worker was installing the conduit while the apprentice held the pipe. The conduit slipped out of the apprentice's hands and struck the injured worker's left hand injuring his finger. The finger was not amputated, but required surgery to repair.",1
"An employee was changing a tire on a fuel trailer using a floor jack. When the employee lowered the trailer, his left hand was caught between the chassis and the tire resulting in fractures that required hospitalization.",1
"On March 8, 2017, a temporary employee was changing a roll of plastic on a machine when an arm was caught in a roller and fractured in two places.",1
An employee was removing fixtures at a location that was closing when the employee suffered severe coughing. The employee was hospitalized.,1
An employee was walking up a flight of stairs while carrying linens when she missed a step and fell backwards resulting in a contusion to the back and head.,1
The injured employee was moving an anchor point to a different position to continue adding shingles when he fell 10 feet from the roof of a three-story building to the flat roof of the second floor resulting in a head injury and hospitalization. The employee's lanyard was detached from the anchor point at the time.,1
An employee was removing a guard on a belt and pulley while the pulley was spinning. His left arm was caught in the pulley resulting in a fractured arm and a crushed left index finger.,1
"An employee was assisting others to move a partition wall. The employee stepped backwards, tripped and fell. As the employee was falling, the employee twisted their body and landed on their shoulder. The employee sustained a broken right shoulder and was hospitalized for surgery to repair the fracture.",1
An employee was pulling wire while working from an 8 foot A-frame ladder. The employee lost his balance and fell off the ladder breaking the right leg.,1
An employee was installing duct wrap from a 10 foot step ladder and fell. The employee struck his head and was hospitalized with a head laceration.,1
An employee was heating and bending metal rail road parts when his shirt caught on fire resulting in second degree burns.,1
A stairway fell onto an employee's ankle causing a fracture that required hospitalization and surgery.,1
"An employee was cutting decking material with a circular saw. The employee miss-stepped and lost his balance. In doing so, the arm that was holding the saw raised and lacerated the opposite forearm. The employee was hospitalized.",1
The injured employee was working at his desk when a car was driven through the building and struck the injured employee.,1
"An employee was disassembling a manifold and a counter weight fell and struck his hard hat. The employee was hospitalized for a skull fracture, lacerations and a fractured rib.",1
An employee was learning to operate a forklift and struck a bollard. His foot was caught between the bollard and the forklift resulting in a fractured foot that required hospitalization.,1
An employee was holding on to the valves of two cylinders of MIG welding gas on two adjacent welding machines and was shocked (110V) due to an internal short in one of the machines. The employee was hospitalized.,1
An employee returned a loaded trailer to the yard at the end of the day. The loaded trailer was supported by a jack. It fell off the jack and landed on the employee's right leg/foot causing multiple fractures that required surgery and hospitalization.,1
An employee was operating a convoluted press machine and got their left forearm caught in the press. The arm was crushed from the hand to the elbow.,1
An employee was operating a table saw and cut his hand requiring hospitalization for surgery.,1
"On March 08, 2017, an employee was hoisting a steel coil via an underhung crane for placement in the cradle of a coil feeding machine. As the operator began to hoist and position the coil over the cradle, the lower button on the crane's control pendant was pressed before the coil was appropriately aligned between the cradle walls. The coil landed on the top edge of the cradle creating slack on the load line, breaking the safety latch, and displacing the coil attachment from the hook. The coil struck a few machine components before ultimately landing on the operator's lower half of his body and fracturing his pelvis. The employee was hospitalized.",1
"An employee was preparing a trailer for a semi-truck to hook up to it. When the semi-truck backed up to connect to the trailer, the employee was struck and pushed under the trailer. The employee was hospitalized for injuries to his upper torso and jaw.",1
"While trying to close a metal gate, a gust of wind pinned the employee between two metal gates resulting in injuries requiring hospitalization. The employee suffered two broken ribs, a broken clavicle and a possible collapsed lung.",1
"Two employees were removing a plywood cover over the vault for a pad mount transformer. One employee stepped forward while lifting and fell into the 3-foot deep hole. The employee sustained a fractured mandible, broken teeth and lacerations to his face.",1
An employee was grading gravel next to a backhoe when the control lever got stuck and struck him in the hip resulting in a fracture in the ball-and-socket joint area.,1
"On March 9, 2017, at approximately 10:30 a.m., an employee was injured while handling cants from the gang saw to the roof top chain. As a 5 1/2 inch x 7 1/4 inch cant came out of the saw, it fell short of the chain and fell towards the floor. The employee reached for the end of the cant and as the cant raised, the employee's right thumb was caught between the cant and the steel hood of the gang saw resulting in a severe cut behind the nail bed above the knuckle. The employee was transported to the hospital where the employee received stitches. The injury was classified as a partial amputation with the tip of the bone broken, but no nerve damage.",0
"An employee was loading parts at the deburring machine, bumped their head, and fell backwards breaking their femur.",1
An employee was operating a shear while standing at the end to catch material as it came out. The employee saw a piece of plastic balling up and attempted to remove it when a quarter inch of his left finger was amputated.,0
An employee was operating a vegetable slicer and amputated the right index fingertip.,0
"An employee was servicing a corn planter and became pinned underneath a tractor hitch while kneeling on the ground. The employee suffered a broken leg, bruised ribs and a bruised lung.",1
An employee experienced spinal separation after stepping down an approximately 8-inch step.,1
An employee was unloading roofing materials on a flat roof when a gust of wind blew him off the roof. The employee fell 16-17 feet to the ground fracturing an arm in numerous places.,1
The employee was heating the core of the precast tank using a propane tank. The flame went out. The gas built up so when she relit it there was a flash fire causing second and third degree burns.,1
An employee was working in the photo lab helping a customer. When she turned to get some photos off of the photo printer she fell.,1
"An employee was working on a single story roof repairing a skylight. The employee was vacuuming up nails when he lost balance and fell through the skylight resulting in broken ribs, a punctured lung and a head laceration.",1
An employee was attempting to open the door to a 30 yard cardboard container and lost control of the door handle after removing the locking pin. Due to the nature of the door closing mechanism (a locking fulcrum) the door handle to these types of containers can have some tension on it when opening. The container wall struck the employee resulting in blunt force trauma to his left cheek/eye socket and a broken nose.,1
The employee was holding the dock plate handles up so that the forklift operator could maneuver the forks into the handles. The employee's left index finger was crushed in the dock plate handle resulting in partial amputation.,0
"An employee was walking to the locker room and was struck by a lift truck. The employee suffered a broken arm, hip and rib.",1
An employee was working on a turbine to connect a dehumidifier to a generator unit. A localized flash-fire occurred resulting in burns to both of the employee's arms and a contusion on the left side of his head.,1
An employee was working in the warehouse and was struck by a forklift resulting in a broken leg.,1
"An employee was starting to fill a trailer with anhydrous ammonia. While grabbing the hose, he lost his footing and fell 46"" off the platform and broke his left humerus.",1
An employee was walking down the steps from the Engine Test Cell when he slipped and fell on his right ankle resulting in a nondisplaced fracture of the right tibia.,1
"An employee was jacking up a vehicle with a bottle jack when the vehicle slipped off the jack, striking the trolley which then struck the employee pushing him up against the wall of the service pit and breaking four ribs.",1
"An employee working in sanitation was pulling the bucket out of the COP tank and spilled hot water onto herself. The employee suffered second degree burns on the chest, abdomen and legs. Water in the COP tank is circulated by a pump to clean the inside of buckets. The water temperature was approximately 180 degrees and the buckets hold approximately 5 pounds of water.",1
"An employee tripped and fell down an unguarded stairway resulting in injury to the employee's head, back and shoulders.",1
An employee was changing an auger bit on a drilling rig when the employee noticed the pin hole was filled with dirt. The employee used his right middle finger to clear the hole when the Kelly bar moved and amputated his finger.,0
An employee was performing preventive maintenance on a powered industrial vehicle (PIV). The employee was cleaning the lifting cylinder from the inside of the PIV when the cylinder pinched his right thumb causing a severe laceration to the bone that resulted in an amputation injury.,1
"An employee was attempting to replace a belt on the pulley system in the bagging area. The machine was stopped when the employee pulled on the pulley. Due to high tension on the belt, the employee's right hand was pulled between the belt and pulley resulting in amputation of the first two fingertips on the right hand.",0
A set up operator was struck by a portable conveyor between the first 1600-ton press and the second 1600-ton press.,1
"An employee was standing on a bucket truck preparing for a job. The employee was not in the bucket, but standing on the truck frame when he fell 9.5 feet resulting in a broken right leg.",1
An employee was descending a ladder while carrying a bundle of wooden stakes and fell approximately four feet striking their chest against the bundle of stakes. The employee was hospitalized.,1
"An employee was carrying boxes, slipped and fell resulting in a back injury.",1
An employee was unloading bundles of steel pipes from a truck when a bundle broke loose and rolled onto the employee's foot resulting in a broken toe.,1
"While releasing a turnbuckle for a poured concrete wall, an employee's right ring finger was amputated at the first knuckle.",0
"An employee stepped up onto a ledge to get supplies, miss-stepped and fell resulting in a fracture to the left hip. The employee was also knocked unconscious.",1
"An employee was attempting to load a piece of 3"" iron pipe onto a forklift to load it onto a trailer when the employee stepped backwards and tripped on containment, dropping the pipe, fracturing the left tibia.",1
"An employee was releasing the tarp that rolls over the top of the load of the dump truck, when the employee fell to the ground causing a pelvic fracture. Strong winds were a factor in the employee's fall.",1
"On March 9, 2017, an employee was maneuvering a steel frame close to the concrete floor when it slid off a block of wood that was supporting one end of the frame and struck the employee's right middle finger resulting in amputation of the fingertip.",0
An employee was attacked by a dog on his delivery route resulting in a wrist/hand injury.,1
An employee was performing maintenance on a motorized roll-up door and received an electrical shock and burns to the index finger and thumb.,1
"The employee and a second employee were confirming measurements adjacent to an open stairwell that did not have the stairs installed yet. While looking at the blue prints and masonry wall to the north, the employee stepped to the east into the unprotected stairwell and fell approximately 11 fell to the ground below. The employee suffered a broken left scapula, fractured ribs on his left side and fractured vertebrae in his lower back.",1
"An employee was inspecting the work being done when a metal scaffold board failed and the employee fell ten feet. The employee sustained a broken arm, three broken ribs and two broken vertebrae.",1
An employee was waiting for his trailer to be off loaded. He was leaning against the trailer with his left hand resting on the trailer when his left thumb was crushed between a board and the step deck platform of the trailer during the unloading process.,1
An employee was ascending an eight-foot step ladder to install a metal strut and fell five feet off the ladder fracturing the right ankle.,1
"An employee was hospitalized after his left arm was caught inside the hose of a high pressure vacuum while the employee was collecting abrasive blasting debris on a bridge. The employee suffered from severe swelling and inflammation of his left arm, from the upper biceps to the hand while cleaning the hose of the high pressure vacuum.",1
An employee fell 35 feet to the ground while handing sheet metal up to the roof from a JLG. The employee suffered fractures to the lower extremities.,1
An employee was checking the banding in the strapper machine when the lid fell onto the employee's hand amputating the left ring and middle fingertips.,0
An employee was performing repair work on a vehicle that was elevated on a vehicle hoist. The employee stood up and hit his head on the car. The employee was hospitalized for a concussion.,1
An employee was lowering a gear onto a metal shop rack and caught his left ring finger between the gear and the rack resulting in an amputation injury.,1
"An employee was operating the laminating machine, stepped back, hit a stool and fell backwards hitting his head on the floor. The employee was hospitalized.",1
An employee was using the table saw and pushing a piece of wood through with a push stick when his hand slipped into the saw blade cutting the two middle fingers.,1
An employee was leaving her desk and fell breaking an elbow.,1
An employee fell from a height of 9 feet 9 inches while building a staircase.,1
An employee was closing an electric overhead door when he heard a noise in the door. The employee hit the stop button and the door came off the tracks. The door fell and part of the door struck the employee's right leg fracturing the lower leg.,1
An employee fell down the stairs and broke a leg.,1
"An employee was driving a stand up pallet jack along the shipping lane. When she stepped out of the pallet jack while it was in motion, her ankle was caught between the angle iron and the pallet jack's platform resulting in a compound fracture to her right ankle. The injured employee was admitted to the hospital.",1
An employee was unjamming the sawdust feeder and amputated the left index and middle fingertips.,0
An employee was operating a cutting machine and amputated two fingertips while unplugging a clog. The machine was running and unguarded at the time of the incident.,0
An employee was doing stucco work when a roll of roofing paper fell off the roof and struck the employee in the head.,1
An employee was working on the line and passed out hitting her head and lacerating the forehead.,1
An employee was taking an opossum out for exercise when the animal bit her on the hand. The employee was hospitalized for an infected animal bite.,1
An employee was making a spring and suffered a fractured left arm when the spring popped out while the employee was adjusting the feed wire.,1
An employee fell from a collapsing cantilever scaffold and suffered a compound fracture to the right leg.,1
"On March 10, 2017, an employee was standing on stacked rebar bundles on a train car when he lost his balance and fell approximately four to five feet to the ground striking his head on a piece of rebar as he fell. The employee was hospitalized.",1
An employee was found unconscious on the ground in the store and bleeding from his head.,1
"The employee was refilling the abrasive media in the blast pot. After filling the blast pot, the injured employee was brushing the loose blast media on top of the blast pot into the material opening when the employee's left hand was pinched by the blast pot actuator injecting abrasive blast media and possibly air into the employee's hand and fingers.",1
An employee slipped on ice in the parking lot and tore muscles in her hamstring.,1
"An employee was cleaning a mixer when his hand made contact with the mixer blade, resulting in amputation of a fingertip.",1
"An employee was boning plates on beef carcasses, pulled a piece of meat back, and lacerated his right forearm with his knife.",1
An employee was unloading material for delivery at a customer loading dock when the employee stepped on a nail puncturing the sole of the foot and chipping a bone.,1
An employee was injured while conducting vehicle inspections on a railcar. The injured employee was found on the ground next to the railcar by another employee. It is presumed that the employee fell from the railcar. The employee was hospitalized for a concussion and a broken arm.,1
An employee was attempting to lower a patient's mechanical bed. It was not working so the employee was troubleshooting when the bed collapsed on her right arm crushing the forearm.,1
"On March 10, 2017, an employee was operating a press machine with his hand resting on the machine's track. The automated mold platform pinched his left index finger resulting in amputation of the fingertip.",0
"An employee was using a 6 foot ladder to install a membrane on the side of the building when he became unbalanced and fell backwards, striking his head on the ground.",1
"Two employees towed a stuck forklift out of the dirt with another forklift. The injured employee got out of the stuck forklift and started removing the tow chain that connected the two forklifts. The other forklift jumped backwards, pinning the injured employee between the two forklifts and causing broken ribs and bruising to internal organs. The second forklift was running and was not in neutral at the time.",1
An employee was pushing carts and suffered a heart attack.,1
A drilling rig was tripping out of the well. The derrick employee was moving the top of a pipe stand to the racking fingers when the employee's retractable lanyard line was caught by the descending top drive and he was pulled to his knees on the derrick platform. The employee sustained a left knee fracture and vascular damage to the left thigh.,1
"An employee was walking across the street to deliver mail when a vehicle struck the employee and ran over his left ankle and right leg, breaking both.",1
"On March 11, 2017, an employee was operating a forklift moving a bundle of square tubing off the rack in the yard. The employee walked underneath the load on the forklift when the operator told him to move because there was a piece of metal sticking out. The employee attempted to move when the piece of metal fell to the ground, bounced up at an angle, and struck the employee on the back of his left leg, breaking it. His leg had to be surgically amputated.",1
"An employee on a ladder was removing packages from an overhead conveyor when the employee slipped and fell approximately 8 feet to the floor, fracturing the left humerus and dislocating the left elbow.",1
"An employee was installing steel grating on the mezzanine level of a newly constructed building when the steel grating panel unexpectedly shifted and fell. The employee fell 20 feet with the panel, suffering skull and vertebrae fractures.",1
"An employee was cleaning a rotary valve machine when a coworker activated the machine, which then amputated the employee's index finger between the first knuckle and fingernail. The machine was not locked/tagged out at the time.",0
"While running vinyl through rollers, an employee noticed the vinyl was building up. The employee was wiping the roller with a rag when the employee's right hand was pulled and burned between the rollers.",1
"On March 11, 2017, an employee was using a hopper when a pipe in the machine became blocked with hardened chocolate, preventing hot water from transferring from the pre-mix kettle to the hopper. The employee used an air line to blow the lines clear. The air made the kettle, which was filled with hot water, overflow and cause first and second degree burns on the employee's back.",1
"An employee was performing maintenance, lubricating a drive train with a rag, when the rag became caught. When he attempted to pull out the rag, his right hand was caught in the chain sprocket, amputating half of his right pinky finger.",0
An employee's right index finger was caught and amputated in a rolling/crimping machine.,0
An employee was clamping a piece of granite to a forklift clamp when the clamp grabbed his left pinky finger along with the granite and fractured it.,1
"An employee was cleaning a deep fryer and emptying it out when oil spilled over to the floor. The employee slipped on the oil and hit the hot fryer, suffering burns on the chest, right thigh, and leg.",1
An employee fell down a flight of stairs and fractured her ankle.,1
"On March 11, 2017, an employee was guiding a finished roof truss down exit rollers past the finish press using a pivot pole as a guide. The employee's left ring finger was caught between the finished roof truss and the pivot pole, partially amputating the distal fingertip.",0
"An employee was breaking down the scaffold system when a bar slipped, knocking his safety helmet off and striking his forehead. The employee was hospitalized for a concussion.",1
An employee suffered a stroke while pulling a pallet.,1
"An employee was assembling a large gearbox using the lifting hoist. Each end has swivel hooks hooked onto the assembly on the shaft ends. When he went to hook the hoist to the customer end the hook swiveled with his gloved hand on the chain hoist. As the weight shifted, his left index finger was caught between the chain and the chain adjustment resulting in amputation up to the first distal joint.",0
"An employee amputated two fingers when casing loosened from a retention nut, fell and struck the employee.",0
"An employee stood on the first step of an 18-inch step stool while trying to clean the wall. The employee fell off the step stool onto the concrete floor, breaking a leg and requiring hospitalization.",1
"An employee was handling a sedated cat when it bit the employee, requiring hospitalization for a possible infection.",1
An employee fractured his finger while placing a die onto a press. The machine was locked out when the die crushed his finger.,1
"An employee was using a rig elevator to pull rods out of a hole. As he lowered blocks down the elevator, the block brakes failed, allowing the elevators to strike and fracture the upper phalange on his left thumb.",1
"An employee was changing a plunger on the press-and-blow machine. The machine was shut down, but the safety device to keep the blanks open was not installed. When the employee activated the machine with his left hand in the machine, the hot blanks closed on his hand causing burns and bruising.",1
"An employee was descending a fixed ladder after installing a thermocouple for a reheat furnace when he missed the bottom rung, lost his balance, and fell to the floor. He fractured his right femur and required hospitalization.",1
Employees were performing cutting operations near a 275 gallon container of used oil when sparks caused an explosion. An employee was hospitalized after suffering burns to their hands and lower body.,1
An employee was helping a coworker adjust the placement of a cellar cover when he slipped and his right middle fingertip was caught and amputated between the cellar cover handle and the matting board.,1
An employee was taking samples of paper to check quality before it was sent to the final roll. He was standing on paper on the ground and had taken his samples when the final roll moved to uptake the slack and pulled the paper from under him. He fell flat on his back and was hospitalized.,1
"An employee fell from a ladder while replacing an air filter, injuring the right shoulder and requiring hospitalization.",1
"On March 13, 2017, an employee was operating a CNC machine and was loading a 2-foot pup joint into the chuck spindle. The pipe dropped in the back, resulting in the pipe coming up in the front. The employee's right hand was located inside the pipe and was smashed between the pipe and the chuck of the machine. PPE was not worn at the time of the incident.",1
"An employee fell off a loading dock while cleaning it and moving skids, sustaining skull and rib fractures.",1
"On March 12, 2017, at approximately 2 p.m., an employee was participating in a ruck march when he suffered dehydration and diarrhea, requiring hospitalization.",1
"An employee was attempting to move a steel cart when a pin came out and allowed the cart to fall onto the employee's left foot, breaking four toes.",1
"An employee was loading insulation into a blow machine when he tripped. As he tried to catch himself, his left thumb tip hit a gear and was amputated.",0
"An employee slipped on water and stepped into a boiler collection pit filled with hot water, suffering burns to the lower left leg and foot.",1
"An employee was securing a spare tire to his trailer with straps when he tripped over the tire and fell 3-4 feet off the trailer, hitting the ground and fracturing his pelvis.",1
The employee was providing illumination to a welder that was welding inside a vessel by means of a miners light (hard hat attachment). An arc flash occurred and the employee was shocked.,1
An employee tripped on a chair leg and fell fracturing her femur.,1
"On March 13, 2017, at approximately 3:40 p.m., an employee was coming down a ladder when he missed a step and fell face-first to the floor. He was hospitalized with a head injury.",1
"An employee was changing an anhydrous ammonia pump when some of the chemical splashed on him, resulting in burns to his hand, arm, neck, and chin. The pump was not locked out and no personal protective equipment was worn at the time.",1
"An employee was connecting a beam to a column when the beam struck and caught his forearm between the beam and column, causing internal bruising that required hospitalization.",1
"An employee was unloading a truck. The truck door had some ice on it and when it docked, the ice splashed on the floor. The employee then slipped on the wet floor, suffering a head injury/concussion.",1
"An employee was using a band saw to cut meat when his hand came into contact with the saw blade, amputating his left thumb tip.",0
"An employee was operating an electric pallet jack and moved it onto the lift gate. The lift gate 
was wet and slippery from running a previous pallet that contained product packed in ice. The jack starting sliding 
toward the curbside of the platform. As the pallet was sliding to the edge, the associate tried to 
keep the pallet level by placing his arm on the pallet, to keep it from falling. The pallet jack continued to slide and as the employee attempted to get out of the way, his finger slid across the pallet jack and was amputated.",0
"On 3/13/17, a ladder slipped while an employee accessed an elevator pit and the employee fell 14 feet to the elevator platform. The employee then rolled and fell an additional 6 feet to the elevator pit, suffering a hairline fracture to the head.",1
An employee was attempting to move pails on a conveyor line when his fingertip was caught and amputated.,0
An employee was using a meat blender when the blade amputated the employee's right ring finger.,0
An employee's left ring fingertip was amputated by the track runner gears of a clamping machine.,1
"An employee was moving a grill component with a lift. When the lift released, the component fell onto his right index finger amputating the fingertip.",0
An employee was putting a trailer jack under a trailer when the yard dog rolled back and hit his left side. He suffered a broken leg and pelvis.,1
An employee was throwing trash from a hopper into a dumpster when he fell into the dumpster and suffered fractured ribs and a possible head injury.,1
Employee was bitten by a poisonous spider while cleaning a forklift.,1
"An employee fell off a flatbed trailer while loading it, suffering a fractured skull.",1
An employee fell backwards off of a ladder from a height of 3.5 feet and hit the back of his head on the concrete below. He suffered a concussion/head injury.,1
An employee was cutting plywood with a powered hand saw when his left index finger touched the saw blade and was amputated.,0
An employee was stepping off a trailer with his left leg while his right foot remained on the trailer deck plate. He then overextended his right leg and fractured his right femur.,1
"An employee was cutting chicken with a knife when he amputated approximately 1/4"" of his left thumb tip.",0
"An employee was erecting a scaffold and was on the second level when he slipped and fell 12 feet to the concrete floor, breaking his left ankle. He was hospitalized for surgery.",1
An employee was working as a safety spotter on an overhead crane. While exiting the crane area he was caught between the crane and the walkway hand railing resulting in a fractured left leg.,1
"An employee was working with sheet metal and studs. He did not realize that a piece of sheet metal was close behind him and when he moved his arm, the sharp edge of the sheet metal struck his left arm resulting in a laceration to his triceps. He was admitted to the hospital for treatment.",1
"An employee was walking down the stairs when he missed the second from the bottom step and fell on to the ground, breaking his collarbone and leg.",1
"An employee was acting as a flagger when he was struck by an automobile. He suffered severe head trauma and multiple internal injuries including abdominal, spleen, pelvic, liver, and knee injuries, requiring hospitalization.",1
"On March 13, 2017, at approximately 10:30 PM, an employee was troubleshooting a vacuum pump when a belt lacerated his left middle finger down the bone. His finger was partially amputated.",0
"An employee was loading metal into a machine to be painted when the entry tower lost air pressure, allowing the rollers to fall down on the employee. The employee suffered a compound fracture to the left arm and was hospitalized.",1
"On March 13, 2017, at approximately 11:30 a.m., an employee was unloading copper pipes from a forklift when he suffered an umbilical hernia and was hospitalized.",1
An employee slipped while walking on the catwalk located over the maintenance pit and fell into the maintenance pit resulting in shoulder and back injuries. It was raining and the catwalk had grease on it.,1
"An employee was using a dolly to transport boxes. When she pulled back on the handle, she was unable to keep it upright and the dolly came down, trapping her finger between the handle and ground. When she attempted to pull her finger out, her skin was removed and her fingertip had to be surgically amputated.",0
An employee was walking in the shop area when he tripped over a device used to cover wires on the floor. He fell and suffered a head injury and brain hemorrhage.,1
"An employee was operating a bucket truck to perform elevated repairs when it began raining. The employee lowered the bucket to the rest position and was exiting when the employee fell 7 feet to the ground, fracturing an elbow and vertebra.",1
An employee was installing a section of scaffolding and suffered a hernia.,1
An employee caught a finger in a sliding door and fractured it.,1
An employee was stacking scaffolding material in a rack and crushed his hands between boards. The employee's left middle finger was fractured and lacerated.,1
An employee was walking a plane from a gate to the aircraft operating area when the employee slipped on some ice and fell fracturing a hip.,1
An employee was pulling a pallet jack into the buck hoist and got his right foot caught between the pallet jack and hoist fracturing it.,1
"An employee was conducting a pressure test inside a wellhead to check for leaks. When he removed his pressure detecting equipment, excess air pressure was released and struck the employee's hand and face. The employee suffered a facial laceration and a laceration and fracture to his hand. The employee was wearing PPE at the time.",1
An employee was on a ladder cutting a piece of wood that was inside an attic access. The ladder slipped out from under him and he fell breaking his right arm.,1
"An employee was performing preventive maintenance on the line 2 case erector, a machine that forms corrugated into a box. The employee was looking to see if a bearing was running smoothly in the machine and had a shop rag in his right hand. The rag got caught in the moving chain and sprocket assembly, pulling his right index finger into the assembly. The finger was severely lacerated and contorted such that it was amputated at the hospital.",0
An employee was on a 6 foot A-frame ladder cutting a 2x6 using a circular saw and amputated a finger.,0
The injured employee was part of a three man team replacing a rope in a high rise elevator. The employee was feeding part of the rope through the rigging when excess rope on top of the car created a loop. The employee's right leg was caught in the loop and when it tightened the employee suffered a compound fracture to the lower leg.,1
"An employee was walking on the wing of a B-1B bomber preparing it for painting. The employee slipped and fell off the aircraft wing tip to the floor 14 feet below. The employee was wearing a body harness, but it was not attached to the overhead lanyards. The employee suffered a left knee fracture and compressed disc.",1
An employee was helping to build a turf roller when the employee's glove got caught between the shaft on the roller and the sand paper resulting in amputation of the left thumb.,0
"Employees were servicing a well. When the injured employee lifted tubing, his finger was caught between the slip segments and the well head resulting in amputation of the middle fingertip.",0
An employee was assisting another employee with shoveling snow and suffered a heart attack.,1
An employee was lifting packages and suffered a strangulated hernia.,1
An employee was attempting to manually manipulate the leading edge of the rail into a lead out stacker. The stacker was displaced by the leading edge of the rail. The employee slipped and his foot went underneath the lead out stacker. The stacker was then freed of the rail that was displacing it and the stacker fell onto the employee's foot resulting in multiple fractures as well as an open wound on the bottom of the foot that extends from heel to toe.,1
"An employee was hand clearing parts from a machine press. The manufactured part from the last cycle got stuck to the upper part of the die. When the employee went to reach for the part, it fell and struck his left middle finger resulting in a fingertip amputation. The part weighed approximately 21 lbs.",0
An employee was pushing a snow blower and struck something that was under the snow causing the snow blower to flip and strike the employee resulting in a back injury.,1
An employee was struck in the shoulder by a board while operating a resaw resulting in a broken collar bone.,1
The employee was placing a rope by hand onto a 24 inch oilfield pipe. The pipe rolled over his right middle finger catching it between the pipe and the top of the pipe rack resulting in amputation of the finger.,1
"While performing maintenance to a large piece of equipment, an employee burned their back with scalding water that was being used to flush the  equipment.",1
Employees were setting up utility poles using a boom truck. They were using choker chains to hold the pole and set it. The chain rolled and the pole caught the injured employee's left ring finger resulting in amputation of the finger.,0
"An employee was delivering packages, slipped on ice and tore their quadriceps which required surgery and hospitalization.",1
An employee was operating a vertical mill and injured a finger. The injury required surgery and hospitalization.,1
An employee was troubleshooting a conveyor and amputated his right index fingertip.,1
An employee was operating a shear and amputated the middle fingertip.,0
An employee was cutting pieces of wood with an under-mounted table top router and amputated the left index fingertip.,1
"On March 15, 2017, an employee was on a freight elevator when the chain broke and the elevator collapsed. The employee sustained broken lumbar vertebrae requiring hospitalization.",1
An employee was cutting wood boards on a table saw and contacted the blade resulting in a deep laceration to the left index finger.,1
An employee was replacing a fluorescent light fixture when he was shocked and fell off a ladder approximately 5 feet high. The employee suffered an injury to his shoulder blade from the fall as well as the electrical shock from the light fixture. The employee was admitted to the hospital.,1
An employee was practicing with the mini excavator when he became trapped between the boom and the cage of the mini excavator. The employee sustained broken bones in the upper face.,1
"An employee was assisting other employees to raise a tower. When he placed his hand on a cable to provide tension on it to aide in the operation, his right hand contacted a pulley and sustained a partial amputation of the pinky finger.",1
"An employee was using the forks of a forklift to remove a post. When the post was pulled up, it struck the employee in the face fracturing the jaw.",1
An employee was loading a truck and lifting materials when he felt severe pain in his back and then the employee passed out. The employee was hospitalized.,1
An employee was sorting packages and suffered shortness of breath. The employee was hospitalized for a possible heart attack.,1
An employee picking up garbage at a stop along the route slipped on ice while pushing a small dumpster. The employee smashed his pinky finger between the dumpster and the back of the dump truck suffering an injury that required amputation of the fingertip.,1
An employee was clearing snow and moving trucks around the parking lot to permit snow removal. He slipped on the icy surface and fell fracturing the right tibia and fibula.,1
An employee was inside the boiler removing broken pieces of refractory from the hopper using a water hose when the wall directly in front of the employee released hot ash and refractory onto the employee. The employee rolled into the hopper and was engulfed by the hot ash and debris. The employee suffered burns to 65% of his body ranging from first to third degree burns. The worst of the burns were to his legs and ankles.,1
"Two employees were positioning trucks. The injured employee was entering the warehouse and was struck by a moving vehicle resulting in a broken left collar bone, an elbow injury, a head abrasion and a right thumb injury.",1
"An employee was walking in the parking garage, slipped on ice and fell striking the right knee on the ice and concrete. The employee was hospitalized for a torn right quadricep.",1
An employee was setting up an offline printer and got a finger caught between the roller and a guard resulting in an amputation injury.,0
"On 3/15/17, an employee walking on a walkway towards the southwest entrance of the building slipped and fell on ice and broke their right leg. The employee was hospitalized.",1
"An employee was standing on the bed of the semi-truck throwing bundles of rebar onto the ground. When the employee went to throw a bundle of rebar onto the ground, the end of the rebar caught his glove dislodging him from the semi-truck onto a concrete sidewalk resulting in a head injury.",1
"An employee was putting cardboard away when the top shelf of a rocket cart, which was raised up, fell down and struck the employee's head. The employee sustained cuts and scrapes to the head.",1
"An employee reporting to work in the morning parked his car in the parking lot. The employee slipped on snow and ice and fell, fracturing his ankle. The employee was hospitalized for surgery to treat his fractured ankle.",1
"On March 15, 2017, at approximately 7:30 a.m., an employee was injured while checking the function of a pump being used to transfer oil from a tank to a compressor station engine. The pump was being heated and a tarp had been placed over the pump in an effort to hold heat due to the outdoor freezing temperatures. The employee reached under the tarp and made contact with a moving piston inside an air exhaust port resulting in the amputation of the right index fingertip.",0
"On 3/15/17, an employee slipped and fell on some black ice in the yard while cleaning off a tractor. The employee was hospitalized for a broken right ankle.",1
An employee was operating a shear to cut metal and crushed their fingers under the sheet metal hold downs resulting in injuries that required surgery.,1
An employee was hooking up two pop trailers between two trailers when the neutral gear fell on his right hand.,1
"On March 15, 2017, the notching head saw jammed and the employee attempted to remove the jam with a steel bar. The saw caught the bar and hit the employee's left hand resulting in two broken fingers and an amputated thumb below the fingernail. The employee had surgery on the broken fingers requiring hospitalization. The saw was not locked out or turned off at the time.",1
An employee was struck by a strand of cable that broke during load testing. The employee was standing in the vicinity of the cable when it broke and it struck his right thigh.,1
The injured employee was walking along side the forklift in order to steady a piece of equipment being moved by the lift. The equipment was being carried in a sling that was suspended on the forks of the lift and the employee was walking in front of the lift with his hand on the equipment to prevent it from swinging. The employee tripped and the lift struck the employee. The injured employee sustained two broken hips and a fractured pelvis.,1
An employee was walking around his desk and stepped into a 12 inch hole fracturing his leg.,1
The injured employee was descending an aircraft stairway when another employee carrying a heavy bag of headsets struck the injured employee on her way up the stairway. The injured employee fell approximately 5 feet to the lower level of the aircraft.,1
An employee was paving a highway road and was struck by a cement truck. The truck ran over the employee's left leg.,1
"An employee was working on a microwave in the medical electronics department (no metal utensils were in use) and experienced electrical shock. This resulted in a laceration to the left thumb, small burns to the dorsum of the left hand, small burns along the dorsum of the right hand, burns along the right 3rd finger and a larger burn at the base of the right thumb that extends to the right index finger.",1
"An employee was exiting a vehicle on the ramp of the main post office, slipped on ice and fell breaking a hip.",1
An employee was working on the yogurt filling line and amputated one-half inch of her right middle finger.,0
An employee was walking in the parking lot from her car to report to work when she slipped and fell on ice fracturing her foot.,1
An employee was working on the ground close to an excavator when the excavator bucket lowered and struck the employee resulting in a dislocated right ankle and possible cracked ribs.,1
"An employee was leaving the store for the evening and slipped and fell on the icy sidewalk sustaining multiple fractures. The employee fractured her left cheek, left wrist and pelvis.",1
"An employee was operating a rewind machine when his glove got caught in the winding material, pulling his left arm in and breaking it.",1
"An employee was delivering mail, slipped on some ice on the ground, and suffered a patellar tendon tear.",1
An employee was working on top of the roof installing drains and fell approximately 25-30 feet to the ground breaking both legs and ankles and displacing a hip.,1
An employee was removing Mylar coating from a stainless steel pipe. He was wearing cut resistant gloves at the time. He then placed the steel pipe on a lathe to sand the coating off the pipe. The rotating steel pipe caught his gloved right hand and pulled it in amputating the middle and ring fingers at the far distal joint.,0
"An employee was on the roof of the repair garage attempting to repair a leak and fell 20 feet through a skylight. The employee suffered various injuries such as head and back injuries, a collapsed lung, and a skull fracture.",1
"An employee was installing fascia onto the truss inside of a two-story house from an extension ladder 6 feet above the floor. His upper body was leaning over the wall when the ladder slipped. As he slid down, his stomach struck a piece of all-thread rod that was protruding from the wall resulting in a puncture wound and hospitalization.",1
"An employee slipped on ice in the parking lot, fell backwards and struck the back of his head on the ground resulting in a subdural hematoma.",1
An employee was making a delivery and lowering the lift gate on the back of the truck when he tripped and fell from the lift gate breaking the left tibia.,1
"While operating a stand-up tram or PIT, an employee was hospitalized for a fractured hand after it was caught between the PIT steering wheel and an APU.",1
An employee was cutting wood with a saw and amputated a fingertip.,0
"An employee was providing assistance to a customer while using a caustic tank. The customer product inlet line had no shutoff valve and the product hose had a downward angle to the truck tank unloading pad. When the employee blew down the product hose, he was sprayed in the face by caustic sodium hydroxide solution, resulting in burns to his mouth, lips, and face.",1
"The employee was walking to the clinic parking lot, tripped over a parking block and fell fracturing the left arm and nose.",1
Two employees were moving light poles in a parking lot. The injured employee slipped and fell in front of the other employee who was operating a Lull at the time. The Lull ran over the injured employee's foot. The injured employee was hospitalized for treatment of a broken left foot.,1
An employee was entering the cab of a 18-wheeler and fell backwards striking his head. He was hospitalized for a head injury.,1
An employee was hooking 2 trailers together using a dolly and suffered an abdominal hernia while picking up the dolly.,1
An employee slipped on ice on a walkway and fell. The employee was hospitalized for a traumatic head injury.,1
An employee was at a customer location moving freight in the truck trailer and struck his head on the load bar. The employee was hospitalized for a head injury.,1
An employee was repairing a machine that was on a jack. The employee slipped and hit the jack and the machine fell three feet onto the employee's right hand fracturing it.,1
An employee was shutting down the stacker machine and amputated the right ring finger to the first joint when the machine caught his finger between the belt and the gear.,1
An employee fell from a ladder and fractured the right arm.,1
An employee was setting up tire parameters and was pinned between a tire machine and the bead set sustaining a broken pelvis and ribs.,1
An employee suffered a pinky fingertip amputation while retracting the parcel chute that delivers packages into the trailers.,0
An employee suffered burns to his face and hands from a flash fire that occurred while lighting the pilot light to a propane water heater.,1
An employee slipped on the icy floor and suffered an ankle injury.,1
An employee stepped off of the back of a trailer and placed his foot on the bumper. His foot slipped and was caught between the bumper and the trailer resulting in a fracture.,1
"On March 16, 2017, an employee was operating an iron worker machine and amputated a finger.",0
An employee was getting lunch meat from the cooler box and walking back to the slicer when her foot got tangled in a box strap causing her to fall and injure her right hip.,1
An employee was clearing a jam on the slitter machine and amputated a fingertip.,1
"An employee stepped out of a tractor, slipped on ice in the parking lot and fell breaking the left ankle.",1
An employee was performing PH analysis on water using sodium hydroxide. The employee ingested some of it and was hospitalized for a burned esophagus and stomach.,1
An employee slipped on a large patch of ice in the parking deck and fell striking his head. The employee was hospitalized for a concussion and short term memory loss.,1
"Employees placed tubing for a welding job on a jack stand to balance it. While discussing how to proceed with the job, the injured employee placed his hand on the tubing and it rolled over and struck his lower right leg fracturing it.",1
An employee was on patrol and slipped on ice on the walkway resulting in hospitalization for a back injury.,1
An employee was involved in an altercation with another employee and fell suffering a hip injury.,1
An employee slipped on ice and snow in the parking lot and fell fracturing the right hip and wrist.,1
An employee was putting a sheet of metal into a pyramid roller when his gloved left hand was pulled into the rollers resulting in amputation of the left right fingertip.,0
A worker was on a break below the dock and was struck by a trailer backing up. The employee sustained a crushed pelvis.,1
"An employee was on a materials rack feeding wire into a wire making machine, lost his balance and fell backwards five feet landing on his back.",1
An employee was setting up the wire draw machine. The employee was stringing up the machine and using a pulling chain to thread wire through the dies. The employee ran the machine in full run mode and pulled the chain wire off. The employee opened the soap access door to look inside and was struck in the mouth and hand by the chain. The employee was hospitalized for a left middle finger laceration and a busted upper lip.,1
"An employee was troubleshooting a light circuit in a building and fell from a 12 foot ladder. The employee was hospitalized for head, neck and wrist injuries.",1
"An employee was de-pressuring a vessel. After a pressure check with nitrogen, the employee was exposed to a small amount of chlorine released from the vent. The employee was admitted to the hospital for chlorine inhalation.",1
"On March 16, 2017, an employee was changing evaporator coils on the roof-mounted cooling unit for the store's walk-in cooler.  The employee was going up an extension ladder to access the roof from the street when the ladder slipped from under him and the employee fell approximately 12 feet to the ground below. The employee suffered a broken right leg above the ankle and a shattered heel bone. The employee was hospitalized.",1
"An employee was walking in the trucking yard, slipped on ice, and fell resulting in a leg injury between the knee and ankle.",1
"On 3/14/17, an employee was trying to attach a transfer cart. While attaching the cart his leg was caught in a pinch point between the cart and the safety bar when the cart moved. The employee's lower leg was broken.",1
An employee was moving and reinstalling equipment. The employee was adjusting the spacer board underneath the piece of equipment when the forklift operator lowered the equipment onto the employee's right middle finger resulting in a fingertip amputation.,0
"On 3/15/17 at approximately 9:45 PM, an employee crawled under a bag machine to place a bucket in the paper catch to capture dripping glue while the machine was running. The employee's hair was caught in a moving shaft in the spot paste unit resulting in a scalping injury.",1
"On March 16, 2017, at approximately 9:50 p.m., an employee was hand cleaning the powered in-feed rollers used for pulling steel sheet from the steel sheet coil located on the nearby mandrel using a rag with a solvent when the employee's right hand was pulled in between the two rollers and crushed.",1
An employee suffered atrial fibrillation after shoveling snow and was admitted to the hospital.,1
An employee was picking up a box when his left middle finger was pinched on a knuckle chain amputating it just below the fingernail.,1
An employee was processing quinoa and amputated part of the index and middle fingers when their hand was caught in the auger.,1
"An employee was leaving the facility after the work shift, slipped on black ice and fell resulting in a fractured hip.",1
An employee suffered a foot injury requiring hospitalization when his foot was caught between the forklift and an angle iron secured to the floor while dismounting a moving forklift.,1
"An employee was loading a lift cylinder into a boom section for assembly purposes. While using a pry bar to position the cylinder, the boom section and cylinder fell onto the employee's lower right leg fracturing it.",1
An employee was shot blasting the inside of a turret. The employee lost their balance and sustained a laceration to the upper arm from the shot blast tool.,1
"An employee was removing hot food from the stove/oven when the contents spilled on his ankle and feet, causing severe second and third degree burns.",1
"An employee was inserting a thin film into an opening (approximately 1/2"") of a pinch roller when his finger became caught pulling his fingers into the opening and causing burns and a fracture.",1
An employee was unloading trash when he fell off the dock and hit his head.,1
An employee had just made a delivery to a restaurant and was preparing the delivery truck for travel. The employee's little finger was caught in the rising tail gate and partially amputated.,0
An employee was troubleshooting one of the vacuum cleaners and contacted the motor fan blade resulting in amputation of his right middle fingertip.,0
An employee was conducting touch-up work on precast concrete on a worksite and suffered a stroke.,1
"On 3/17/17, at 3:00 p.m., an employee was inside a box truck loading vertical wooden panels when the panels fell against him, breaking his left femur which required surgery and hospitalization.",1
An employee was walking in the facility when her left heel slipped out from under her and she fell fracturing the L2 vertebra.,1
An employee was unloading a waste receiver box. The employee walked behind the box to check the cable and the box slid off the truck pinning the employee between the box and the wall. The employee was hospitalized for a separated shoulder and a broken rib.,1
An employee was operating a rail spike machine and noticed that a steel bar was not feeding properly into the pinch wheel. The employee used his hand to manipulate the bar to feed properly and caught his right middle finger in a pinch point resulting in a fingertip amputation.,0
An employee was trying to unjam a boxing machine. The machine cycled and his right hand was caught in a chain and sprocket resulting in several broken fingers. The right pinky finger was later amputated.,0
An employee was walking into work when he slipped on the ice and fell to the ground. The employee suffered a head injury and a ruptured spleen.,1
An employee was cleaning a moving roller when the rag got caught in the roller pulling the employee's left hand into the roller and partially amputating the middle finger. The employee was wearing leather gloves at the time.,1
An employee was operating a roll former. His gloved hand was caught in the rollers and pulled in resulting in three broken fingers.,1
An employee was performing preventive maintenance on a conveyor and was wiping down the conveyor frame with a rag when the rag got caught between the conveyor belt and the roller. The employee's right hand was pulled into the machine and his right middle and index fingers were severely lacerated resulting in amputation. The conveyor was not locked/tagged out at the time.,0
"The employee was operating the wrapper knife machine which cuts plastic wrap that is used to package ice pops. The plastic wrap jammed underneath the guard. When the employee attempted to clear the jam, his left thumb was severely lacerated requiring surgery and hospitalization.",1
An employee slipped and fell on ice while entering the workplace. She dislocated her elbow and broke her wrist.,1
"An employee was hooking up a roll-off trash container, slipped on the ice and fell resulting in a broken right femur.",1
An employee amputated the right ring finger while operating the back pack vacuum machine.,1
"On March 17, 2017, an employee was using a band saw to cut meat and suffered a pinky fingertip amputation and a laceration to the ring finger. Cut resistant gloves were worn at the time.",0
An employee was stocking the shelves using a rolling step ladder. The employee fell off the ladder and was admitted to the hospital for head trauma.,1
An employee was helping to unload the loader off of the trailer when their left ring finger was caught between the ramp and loader bucket resulting in amputation.,0
"An employee was operating a tractor trailer and drove off the side of the access road causing the tractor trailer to topple over. The employee suffered a head laceration, neck pain and internal bleeding.",1
An employee was adjusting the rollers on the shear machine to loosen the carpet. The rollers moved and pinned the employee's hand resulting in two broken fingers.,1
An employee was using a radial arm saw to cut pieces of wood product when the saw cut his ring finger and into his hand requiring several sutures. The worker was hospitalized.,1
An employee was using a skid steer with a chain to pull on a piece of brass. The chain broke and snapped back striking the employee on the face. The employee was hospitalized with four broken teeth and a facial laceration.,1
An employee was standing on the riding step of the refuse truck. The truck started to roll and the employee fell off the step striking his head on the pavement. He was hospitalized for a concussion.,1
An employee was using a manual lathe to polish a small pin used in mold manufacturing. He was polishing the rotating pin using a piece of sandpaper. The glove on his middle right finger got caught by the rotating part pulling his hand in resulting in amputation of the right middle finger and a broken ring finger.,0
An employee was delivering mail to a residence and fell down three stairs resulting in a broken right tibia and fibula that required hospitalization.,1
An employee was bending to pick up a broom that was laying on the floor against the wall in the linen department when a fire extinguisher fell off the wall and landed on his right thumb. His thumb was amputated from just below the thumbnail up.,0
"An employee was cutting up a tree when a part of the tree fell and hit the employee, breaking his leg.",1
An employee was conducting a safety inspection of the room and fell from a fixed access ladder after receiving an arc flash burn to his forearm. The employee suffered a broken ankle from the fall off the ladder.,1
An employee was descending a rolling ladder and missed the last step. He fell and sustained a head laceration.,1
An employee was attempting to clear a jam in a small metal scrap baler. The baler engaged while the employee's left foot was in the machine resulting in amputation of the foot at the ankle.,0
"An employee was cleaning a cooler with a water hose. The employee stepped in a puddle of water, slipped, and fell backwards hitting his head on the floor.",1
"An employee was operating a roll-in band saw. He was using the roll control to move parts into the blade area and then pulling the cut parts out with his left hand. As the employee was reaching for a cut part, his left hand contacted the blade amputating the middle, ring, and pinky fingers.",0
"An employee was placing rotors on a shelf using a step ladder and holding onto the shelf support bar. When the employee stepped off the ladder, the shelf collapsed on the employee's left hand resulting in a partial amputation of the left index finger.",0
An employee was working on a piece of equipment and was adjusting the tube valve (approx. 30lbs) which has a manual handle and was not in the lock position. The employee put his hand inside the valve to check to see if it was flush. The lift handle released itself while the employee's finger was still in the tube resulting in the partial amputation of the third finger on the left hand.,0
An employee tripped over a rodent control box and fell fracturing the right hip.,1
An employee was assisting a customer and fell backwards striking their head on the concrete floor. The employee lost consciousness and was hospitalized.,1
An employee placed a pry bar into a flywheel of the machine. The machine started and the pry bar struck his right forearm breaking it and his wrist.,1
An employee was hanging bridge plates and lost his balance in the rail car and fell to the ground. The employee suffered a laceration to the back of his head.,1
"An employee was attempting to position a pipe on the swage unit using an F wrench style tool. When the employee was applying force to the tool, it slipped off of the pipe and the employee struck his hand on the metal table runner. The employee's hand was pinched between the tool and the table runner resulting in partial amputation of the right middle finger.",0
An employee was in the parking lot after work and was stuck by a car resulting in a laceration to her arm.,1
"An employee was walking down the dock stairs, slipped and fell breaking his arm. The employee was admitted to the hospital.",1
An employee was pulling a pallet jack and struck a stationary pallet jack. Her finger was caught between the two pallet jacks resulting in a partial amputation.,1
"An employee slipped on cardboard and hit the floor, fracturing the left hip and requiring surgery.",1
"An employee was transferring a chemical (alkali) from a bulk tank to a smaller tank. The smaller tank overfilled and chemical spilled onto the floor. The employee slipped and fell on top of the chemicals resulting in chemical burns to the left side of his hip, the back of his leg and his face.",1
An employee was driving down the aisle and dismounted the scooter before it had come to a complete stop. The employee's right ankle was fractured.,1
"An employee was operating a valve to reduce steam pressure in a boiler when hot water sprayed out of a vent line and hit him. He sustained second degree burns to his hands, right knee, and neck-facial area.",1
An employee was changing a die on a forge when the prop he had placed under the forge hammer to hold it in place was knocked out and struck him in the head. He suffered a fractured skull and had surgery.,1
An employee amputated their index fingertip while cutting a piece of pipe with a pipe cutter.,0
"An employee was walking down a grocery aisle when she fell and broke her leg, requiring hospitalization and surgery.",1
"An employee was moving to dewater a barge void when he fell 25 feet through an open barge hatch, breaking three ribs, his pelvis, and his wrist.",1
The employee had a heart attack while going up and down jet bridge stairs.,1
"An employee was inserting a 5"" pipe into a large section of duct work. He needed a come-a-long that was at the other end of the pipe. He climbed onto the pipe and started walking on the pipe to reach the come-a-long. When he reach a flange, he stepped over it and then fell approximately 6' to the floor. The employee sustained bruised ribs, a bulging disc and a grade two kidney tear.",1
"An employee was cleaning a discharge chain on a conveyor when his thumb was caught in the chain, amputating his right thumb nail and bone. The conveyor was not locked/tagged out at the time.",0
An employee was greasing bearings on a running machine and his left index finger was caught in the chain and sprocket resulting in amputation at the first knuckle. The guard was removed at the time.,0
An employee was walking the work site in preparation for land clearing. The employee tripped and landed face first onto a tree resulting in a cut lip and chipped teeth.,1
"While climbing up a scaffold to measure a window, an employee fell approximately 9 feet to the concrete ground, breaking ribs and the pelvis.",1
An employee was lifting the edge of a steel roller conveyor section when the employee's left middle fingertip was pinched between the conveyor and a fork.,1
"An employee was using a battery-powered plastic banding tool to wrap a coil of steel. As he tightened the band, his left index fingertip was caught between the band and the coil, resulting in a deep laceration. His left index fingertip had to be amputated.",1
"An employee was operating a cutoff saw to cut pipe when it bound and kicked back, lacerating his chest, neck and cheek.",1
An employee was mopping the floor when she fell and fractured her hip.,1
"An office door closed on an employee's left thumb. She suffered a damaged tendon under her thumb nail, requiring overnight hospitalization and surgery.",1
An employee was deburring a piece of steel on a belt sander when the metal flipped up and caught/amputated his right thumb tip between it and the belt.,0
"An employee lost his footing and fell in the path of an excavator bucket, which scraped his right leg, causing a hairline fracture and swelling that required hospitalization.",1
An employee was trying to pick up a piece of concrete with a walk-behind mini track loader when he was kicked back by the loader and struck a concrete wall behind him. He suffered a fractured hip and pelvis.,1
"On March 20, 2017, an employee was walking in the dining room/kitchen, slipped, and fell resulting in a fractured right femur.",1
"An employee was reversing a stand-up forklift when the forklift jerked. He fell backward and was pinned between the forklift and a shipping container, suffering a deep leg laceration.",1
"On March 20, 2017, at approximately 6:30 p.m., an employee was guiding a sample leather sheet through the roller machine. The employee's hands were pulled into the machine and caught between the top and lower rollers resulting in a fractured right thumb and fractured metacarpals in both hands including lacerations, abrasions and contusions to both hands.",1
"The injured employee was assisting another employee to remove a joint of drill pipe from the pipe rack/gull wings by utilizing an extended boom forklift. The rack was in close proximity to the motor sheds. In order to reach the joint of drill pipe, the forklift was positioned at a 45 degree angle from the rack. The injured employee used lifting slings to raise the load and was caught between the motor shed and the joint of drill pipe injuring his right leg.",1
"An employee was using liquid dishwashing soap when the product splashed the employee, causing chemical burns to the eye and chest.",1
"An employee was operating a printing press when he attempted to clean debris from the press wheel. His hand was pulled into the rollers, and he suffered damaged nerves and swelling in his left arm up to the elbow.",1
An employee was adjusting the jib lock at the side of the main boom on a 55-ton boom truck. He loosened the lower securement bolts. While loosening the upper bolts one of the lower bolts came out and the jib slipped off of the locking plate. It dropped a couple feet until resting on the cab and struck the employee on the face and left shoulder.,1
"An employee was operating a slitter machine which unrolled steel coils. The coils develop slack as they are unrolled and to counter the slackness the operator manually inserts cardboard slats. As the employee inserted a slat, a gloved right hand was pulled into the coil. The middle, ring and little fingers were amputated. The thumb tip was also amputated.",1
"An employee was replacing a piece of tin that had blown off a building when he lost his balance and fell approximately 8 feet from his ladder to the ground, fracturing both ankles.",1
"An employee was throwing a bag of trash into the dumpster when he tripped/slipped and fell to the ground, injuring his hip. He was hospitalized and had surgery.",1
"An employee was walking the dock area to check for empty trailers when he was struck by a forklift, breaking his foot, heel, and toes.",1
An employee was operating a press break to bend sheet metal and amputated the middle two fingertips on the right hand when they were pinched between the upper and lower dies.,0
An employee suffered a fingertip amputation while working with conduit on a concrete floor. The injured employee was manually bracing a piece of metal conduit while another employee applied pressure to bend it. The conduit rolled and caught the injured employee's finger between the conduit and the concrete floor resulting in amputation of the left middle fingertip.,0
"An employee was unjamming a multi-aspirator system when the machine cycled, resulting in amputation of his left hand middle finger.",0
An employee was unloading a truck and suffered a heart attack.,1
An employee was working on a roof with a leaf blower and fell to the ground while climbing down the extension ladder resulting in a dislocated shoulder.,1
An employee suffered a right index finger laceration while working near a shrink wrap machine.,1
An employee was operating a shrink wrap machine and caught her right hand in the running machine resulting in a severe laceration to the right index finger.,1
An employee was working out of a bucket truck when an arc flash occurred and the employee was burned.,1
"On 3/20/17, an employee was operating a brake press to bend a piece of metal. While he was feeding the press, his right hand entered the machine, amputating his right middle and ring fingertips.",0
An employee's hand slipped while cutting wood with a table saw. The saw blade then avulsed the employee's left third fingertip.,1
"An employee was moving an empty hamper to a worksite. The employee was holding onto a bungee cord affixed to the hamper when the bungee cord came loose, causing the employee to lose balance and fall to the floor. The employee suffered a broken left femur.",1
An employee was performing sanitation maintenance on a conveyor belt and climbing a ladder when he lost his balance and fell approximately 6 feet. He suffered fractured vertebrae and internal bleeding.,1
An employee was handling a damaged smoke grenade when it detonated in his hand. He lost his pinky finger and thumb tip.,1
"An employee reached into a gang box to get some welding rods. He placed one can of welding rods to the side and set it on another can of rods. He was reaching to grab a 1/8"" can of rods when an opened can tipped over and lacerated his ulnar artery with the metal lid.",1
"An employee was guiding a part into the ring roller machine. As the part was forming, the employee's glove became caught in the rollers and pulled her left hand into the rollers amputating her little, ring and middle fingertips.",1
"An employee was operating a forklift to unload trailers when he drove into a crosswalk safety gate arm, which punctured the inside of his left thigh.",1
"An employee was on a ladder, putting a hanger on a gate valve, when the employee fell off the ladder and into a ditch, breaking a leg.",1
"An employee was moving plywood with a cart and a tractor when a stack of plywood fell on him, fracturing his pelvis.",1
"An employee was nippling up a blowout preventer when the cable holding a flange broke and the flange fell onto the employee's left hand, amputating the left index finger distal phalanges.",1
An employee was performing maintenance on a shingle manufacturing machine when his right ankle and two right-hand fingers were burned by hot asphalt.,1
An employee was cleaning out a super heater hopper and was burned by hot ash.,1
"An employee was stocking a shelf with dog treats that were on a pallet. He tripped over the corner of the pallet, fell, and broke his hip, requiring surgery and hospitalization.",1
"An employee was attempting to load material into a monorail cart. As the employee was pushing the material into the monorail material cups, the employee's right middle finger was pinched between the material shell bar and monorail cart cups. The fingertip had to be surgically amputated.",0
"An employee was pulling a plastic pallet over a foot stopper on a conveyor when the pallet crushed her left middle finger, lacerating and fracturing it.",1
"On March 21, 2017, an employee was using a baler to compress metal parts into a block. The employee's left foot was pushing some wire into the baler when the horizontal door caught the foot and amputated two toes. The baler was running at the time.",0
An employee was operating a press brake and amputated their left ring finger.,1
"On March 21, 2017, an employee was cutting sheathing with a circular saw to make an opening for a staircase and fell 9 feet 3 inches from the first floor to the basement resulting in a fractured eye socket. The employee was not wearing fall protection at the time.",1
An employee suffered a finger amputation while placing pieces in a press brake.,0
"An employee was blowing down a compressor when he fell down and suffered facial fractures, requiring hospitalization.",1
"An employee was attempting to move a newborn calf when the mother cow rammed him on the side with her head, breaking about six ribs.",1
An employee was feeding wire into a wire-pulling unit when the employee's fingertip entered a pinch point on the machine and was partially amputated.,0
"An employee was accessing the top of a baler when the ladder he was on kicked out. He then grabbed the structure next to him and injured his shoulder, requiring surgery and hospitalization.",1
An employee was cutting aluminum stock on a table saw. A piece of metal kicked back and severed the tendon to the thumb on the right hand.,1
"An employee was riding on the side of a forklift. When he exited the forklift while it slowed down, his right lower leg was struck and run over by the forklift resulting in multiple fractures.",1
"An employee was unloading a forklift from a trailer when the forklift moved and rolled over the employee's left leg, ankle, and foot, requiring hospitalization.",1
"A temporary employee was on an A-frame ladder, applying sealant to a house window, when he fell 8 feet to the ground below. He lacerated his head and fractured his shoulder.",1
"An employee was straightening out wire when he fell backwards and contacted the metal edge around the bottom of a tank, lacerating his right arm.",1
An employee was recovering a glass container from an autoclave when the hot phosphate buffer saline solution erupted from the autoclave and burned the employee's legs. Proper PPE was not worn at the time.,1
An employee in a cubicle tripped over a cord and fell against the cubicle wall before hitting the ground. The employee suffered a hip injury and was hospitalized.,1
An employee was troubleshooting a drive motor on an embossing machine when the employee's fingertip was caught and amputated in two of the motor gears.,0
An employee was admitted to the hospital after becoming dehydrated at work.,1
An employee tripped and punctured his left foot on a metal strand that had just been cut. He was hospitalized and had surgery. Proper PPE was not worn at the time of the incident.,1
An employee was pulling a 50 lb. bag of powdered cheese across a pallet on the production floor when he felt a sharp pain in his lower abdomen.,1
"An employee was walking and tripped over a vacuum cord and fell, fracturing his knee.",1
"An employee was loading pre-fabricated racks of 4-inch conduits from a cart onto a trailer when his finger was caught between the cart and the conduit, amputating his right ring fingertip.",0
An employee fell down the stairs and broke an ankle.,1
An employee was delivering frozen food to a customer. He slipped on ice in the refrigerated trailer and fractured the lower right leg.,1
"An employee was reattaching the gas line to an oven cook top. As he was soldering the line, the gas ignited, causing second and third degree burns on his arms and legs. The gas was not turned off at the time.",1
"An employee was lifting a mold with a crane. He had rigged the mold using chain slings through eye bolts secured to the mold. He was operating the crane with his right hand and placed his left hand on the chain sling/top of the eye bolt. As the slings became tighter, the chains came together and pinched the end of his left thumb, causing an open fracture of his left thumb tip. His thumb tip had to be surgically amputated.",0
"An employee had gone up the unguarded stairway to an office that was locked. When he turned to go back down the stairs, he reached out for the handrail that was not there and fell 10 feet off of the landing. He contacted the floor and fractured his skull.",1
"An employee was moving a piece of sheet rock on an unguarded balcony on the second floor of a building when he fell two stories to the ground, suffering broken bones and contusions that required hospitalization.",1
An employee was unloading a trailer when his head hit a piece of metal on the trailer. He suffered a head laceration and was hospitalized.,1
"An employee was operating a beam saw when he made contact with the moving blade, cutting his right hand.",1
An employee was operating a multiple spindle drilling machine to make stiles for wood products when the pneumatic hold-down came down on her right ring finger and amputated the fingertip to the first joint.,1
An employee was observing bridge construction when an excavator struck a telephone pole knocking it over. The telephone line struck the employee on the head. The employee was hospitalized for a head injury and an elevated heart rate.,1
An employee was cutting pipes located in the ceiling. The employee dismounted the ladder and broke both feet/ankles.,1
"On March 21, 2017, an employee was checking an empty chemical hopper and amputated two fingers on the right hand when the slide gate struck the employee's right hand.",0
An employee was using a forklift to move building materials from a truck to a construction site when the forklift overturned while going up the driveway. The employee broke an arm and ribs.,1
An employee was cutting a threshold with a table saw when the blade amputated the employee's fingertips. The table saw was unguarded at the time.,1
"An employee was standing on a ladder to install an HVAC at a jobsite when he slipped and fell approximately 4 feet to the ground. He cracked several ribs and felt sore on his right side, requiring hospitalization.",1
"An employee was carrying trays back into the kitchen area when she slipped and fell on the wet floor, fracturing her left hip and requiring hospitalization.",1
A temporary employee was removing a part from a neck down machine when the machine was activated via the foot control. His left middle fingertip was then caught and amputated in the machine's nip point.,0
"An employee tripped and fell on shrink wrap on a pallet, fracturing the left femur.",1
"An employee was struck by a forklift while emptying a bag into a hopper. The employee suffered a fractured left wrist and L12 vertebra, requiring hospitalization.",1
"On March 22, 2017, at approximately 2:30 p.m., an employee was installing a poster on a billboard sign when he fell 16 feet from the catwalk to the ground below, breaking his right hip and suffering multiple bruises.",1
"An employee was looking on top and under huge metal sorters for documents. When he lifted his head, it struck the metal frame of a sorter and was injured.",1
"An employee was winding fiberglass onto a spinning mandrel when his gloved right hand was caught by the fiberglass/mandrel and pulled into the winder. When he pulled his hand out, his middle and ring fingertips were amputated.",0
An employee was flowing production water to his water trailer when he tripped over a pipe at the well site and fell on his face. He broke his nose and required hospitalization.,1
"An employee was cutting demo scrap with a gas and oxygen torch when he felt his back getting hot. After removing his jacket and shirt, he found a burn roughly the size of a sheet of paper in the middle of his back. He was hospitalized.",1
"An employee was filling an ammonia tank with ammonia when it spilled on him, causing dermal burns that required hospitalization.",1
"An employee was walking across the parking lot when he slipped and fell on a patch of ice, breaking his left hip.",1
"An employee was unloading a car engine with a coworker when the engine became caught on the truck bed and fell. As the injured employee attempted to catch the engine, his left index finger was caught between the pallet and the engine, amputating his fingertip.",0
"On 3/22/17, at about 06:14 a.m., an employee was dumping trash from a trash hopper into a larger trash bin when the employee's left ring fingertip was caught and amputated between the two trash receptacles.",0
"While descending from the top platform of an operator loader, an employee walked toward the affixed ladder, lost his balance, and fell approximately 4.5 feet to the ground level. He fractured his left ankle.",1
"An employee was offloading perforating guns from a trailer to the ground when his fingertip was pinched between two sections of pipe, resulting in an amputation.",0
"On March 22, 2017, an employee strained her back and chest while helping to stop a patient from falling.",1
"An employee tripped and fell while walking, fracturing the left hip.",1
An employee fell on the sidewalk and hit her head.,1
"An employee was attempting to adjust the print plate on a printer machine when his left ring and middle fingers were caught between the machine's rollers. His left ring fingertip was amputated, and his middle finger was lacerated. The machine was unguarded at the time.",0
"An employee was transporting forklift mast pieces using a crane and sling when the pieces slipped in the sling. The material shifted and pinched his right pinky finger, amputating the fingertip.",0
An employee was bitten by a brown recluse spider and hospitalized for an allergic reaction to the spider bite.,1
An employee was attempting to retrieve a piece of dough that was hanging on a moving conveyor when his right hand was pulled into the machine. The teeth of a hard plastic sprocket wheel then lacerated and fractured his hand.,1
"An employee's foot was struck by a forklift that was backing up, requiring hospitalization and surgery.",1
"An employee was repairing a floor with a handheld saw. The employee shut the saw off, reached near the saw, and made contact with the blade, which was still coasting to a stop. The employee's left index fingertip was amputated.",0
"While driving an electric jack, an employee went around a corner and struck a second, parked jack. His foot went off his jack and was crushed between the two jacks.",1
"An employee was installing transition duct on top of a unit when he fell 5 feet to the concrete below, breaking his leg.",1
An employee's fingertip was amputated after entering a tube-cutting machine.,1
An employee was standing at the end of a conveyor catching long crossouts to be bundled. A crossout landed on the frame of the conveyor rather than falling off the end of the conveyor belt. The employee's left middle fingertip was caught and amputated between the crossout and conveyor frame.,0
An employee was stabbed by another worker at the worksite.,1
An employee was pushing a loaded scaffold rack onto a pallet jack and pinched his right thumb between the pallet jack handle and the pipe spool resulting in amputation of the thumb.,1
An employee was in a cage carried by a forklift with his harness on when the cage with him inside fell approximately 12 to 14 feet to the ground.,1
"An employee was in the gym with a class when a student with developmental disabilities pulled her hair, causing her neck to twist and suffer a serious injury.",1
"An employee was driving a forklift when his foot was caught between the forklift and a barrier, fracturing it in three places.",1
"Employees were inserting 6-foot pipe into a mill lathe. When the machine turned on, one of the employee's hands was caught between the lathe and valve stem resulting in lacerations to two fingers on the right hand.",1
An employee was loading material into a densification machine when the material wrapped around his right arm and pulled him into the machine. His right arm was amputated at the shoulder.,1
"An employee was cutting meat with a band saw when he made contact with bone in the meat and lost control. His right hand then contacted the blade, amputating his thumb and ring finger.",1
"An employee was taking inventory when he pulled on an aluminum sheet stack and aluminum sheets fell onto his left leg, breaking it and requiring hospitalization.",1
"An employee was performing maintenance in the point of operation of a rock crusher. When the retaining pin for the rotor was removed, the employee fell with the rotor into the point of operation. The back of his calves were lacerated and de-gloved by the rotor, requiring hospitalization.",1
"An employee was merchandising rose bushes in a client's garden center when she slipped on loose soil that was on the wet ground and lost her balance, falling onto her right side and breaking her arm.",1
"An employee struck a tree while riding a tube down a snow-covered hill, suffering multiple arm fractures, five fractured ribs, a punctured lung, and possible kidney damage.",1
"An employee was performing maintenance and degreasing near the chain and sprocket of a conveyor belt when the conveyor began running. The employee's right middle fingertip was then caught and amputated in the ingoing nip point of the chain and sprocket, which were unguarded at the time.",1
"An employee slipped and fell on the ground while walking to deliver mail, suffering a broken hip.",1
"An employee was using a power jack to do overhead work. As he came down off the power jack, he slipped and fell 1 to 3 feet, landing on the floor and hitting his head. He was hospitalized.",1
"On March 23, 2017, an employee ascended to the fourth rung of a ladder when it collapsed and he fell to the ground. He lost consciousness, broke his wrist, and sustained possible facial fractures, requiring hospitalization.",1
"On March 23, 2017, at 4:30 AM, an employee was packing snacks at a packing table when the employee fell and struck an adjacent table, suffering head lacerations that required hospitalization.",1
"An employee was struck by a privately owned motor vehicle in the site parking lot, suffering elbow and leg injuries.",1
An employee on the ground was struck by a falling tree branch and suffered a broken leg.,1
An employee was cutting concrete with a power saw when it slipped and lacerated his hand.,1
"An employee was clearing a jam on an indexing conveyor belt when the belt indexed unexpectedly, catching and amputating the employee's right ring finger at the first digit. The conveyor's emergency stop was not activated at the time of the incident.",0
"While descending a step ladder, an employee missed the bottom step and fell to the floor, fracturing the left tibia and fibula and requiring surgery.",1
"An employee was feeding his assigned K-9 at the kennels when his dog darted out, pulling the leash and turning him around. He suffered a herniated lumbar disc in his back.",1
An employee's left index finger was amputated after contacting moving parts in an exhaust fan in the paint department. The exhaust fan was unguarded at the time.,0
"An employee was operating a forklift and driving it to the charging station when the forklift skidded on the wet floor. The employee tried to stop the forklift by extending his arm. In the process, he crushed his hand.",1
An employee was delivering mail. The employee stepped onto the back bumper of the postal vehicle to step inside the vehicle. His foot slipped off of the bumper and he attempted to break his fall using his right arm. The employee suffered several fractures to the right wrist requiring surgery and hospitalization.,1
An employee was cleaning a printing press when his right arm was caught and fractured in a roller.,1
An employee was cutting chicken with a knife when his left thumb tip was amputated. Cut-resistant gloves were not worn at the time.,0
An employee was cutting loose a cradle that was holding up a hose davit boom when the cradle broke lose and struck the employee. The employee suffered a broken right leg.,1
"An employee was struck by a pipe while attempting to open a bleed line, suffering contusions and broken bones in his torso. He was hospitalized.",1
"An employee had changed the packing on a frac pump and was preparing to install the plunger when the plunger slipped and smashed his finger against the corner of the fluid end, amputating a portion of his left pinky.",0
"On March 23, 2017, an employee was at the nut welder retrieving an extra nut dropped by the nut feeder when the employee's left fingertip was caught and amputated between the nut being retrieved and the tip of the welder.",0
"A crane operator was setting up to perform work on the HVAC units on the roof. The rear outrigger penetrated the concrete surface which caused the crane to partially turn over in the direction of the counterweights. The pill ball swung back towards the crane cab. The crane operator exited the crane cab and struck the injured employee standing outside the crane cab knocking him to the ground. The injured employee sustained fractured lower vertebrae, a foot fracture and a head contusion.",1
An employee was using a high-pressure water line when the water punctured the skin on his leg. His wound became infected and required hospitalization.,1
"An employee wearing gloves was drilling a hole in an exterior wall when the drill became jammed. While trying to unjam the drill, the employee's left pinky was caught and amputated by the rotating drill bit.",1
"An employee was moving boxes of raisins from a display when he tripped and fell, breaking his right ankle and requiring hospitalization.",1
"On March 23, 2017, an employee was using a forklift to unload skids in a trailer when a box fell from a pallet. The employee stopped the forklift and applied the emergency brakes. While he was bending over to pick up the box, the forklift rolled and the forks ran into his ankle, pinning him against the skid in the trailer. His left ankle was fractured.",1
"On March 23, 2017, an employee was working at the anilox roller when it began to move and caught the employee's left hand, amputating two fingers. The roller was energized at the time.",0
"An employee was inspecting his 18-wheeler while it was parked on a truck weigh scale. The employee was climbing in or out of the tractor when his foot was caught on the scale railing, causing him to fall to the ground and fracture his tibia/fibula. He required hospitalization and surgery.",1
"An employee was using a crescent wrench to loosen a nut on the base of a lathe when the nut came loose and the wrench came off. The employee then lost his balance, fell backward to the concrete floor, and fractured his left elbow.",1
"An employee tripped and fell on a concrete curb, breaking his kneecap.",1
An employee was cutting wood with a table saw when his hand was pulled in and his finger was amputated. The saw was unguarded at the time.,0
"An employee and a coworker attempted to re-activate a dock plate after servicing the hydraulic pump. The employees removed their lockout devices and found that the dock plate would not lower. The injured employee went underneath the dock plate to attempt to adjust it to lower properly. As he was in the process of doing this task, the dock plate fell onto his body, puncturing his lung, breaking ribs, and breaking his left scapula.",1
"An employee stepped underneath a coat hanger while reaching for an article of clothing and walked into a wall-mounted clothing hook, hitting and dislodging his left eye.",1
An employee was attempting to stow a boom lift in a truck carriage when the boom fork moved and amputated about 1 inch of his right thumb.,1
"While participating in a group exercise, an employee suffered an acute loss of mobility in the arms and shoulder, requiring hospitalization.",1
"An employee was supervising coworkers who were pouring castings when heat from the castings ignited the employee's clothes, causing second and third degree burns to both legs. Proper PPE was not worn at the time of the incident.",1
"An employee was hit by a soccer ball while coaching a soccer game, chipping a tooth and breaking an orbital bone. The employee was hospitalized.",1
"On March 14, 2017, at 4:30 p.m., an employee was standing on the back of a company panel truck van after loading pipe on the trailer when the van began moving. He then slipped and fell from the truck and struck his head against the truck or trailer, fracturing his skull and requiring hospitalization.",1
"An employee was walking when she missed a small step and fell down, fracturing her right elbow and right foot.",1
"On March 24, at around 7 a.m., an employee was working on an HVAC piping system that was under a pressure test. Believing that the pressure test was completed, he removed the end cap from the pipe. There was still pressure in the pipe, which caused the end cap to fly off and strike him in the mouth area. He suffered lacerations to his mouth and cheekbone.",1
"An employee sat on a backpack that had her personal knife stored inside the exterior pocket, cutting her right leg.",1
An employee was using a saw to cut a wood doorframe when the blade amputated the employee's left thumb tip.,0
"An employee was working on the press room floor when his arm was pulled into a running roll, removing skin and requiring surgery.",1
"An employee was inspecting and servicing fire extinguishers when a client's forklift struck the employee's left ankle from behind, breaking it and requiring hospitalization.",1
"On March 24, 2017, an employee was spotting a front-end loader that was loading barrier walls onto a low boy trailer when one of the barrier walls (12 feet long, weighing about 5,000 pounds) fell on his ankle and fractured his left leg. He was hospitalized and his leg was amputated below his knee.",1
"An employee was rigging a dump cart to an overhead hoist using a metal chain when the chain came loose. The dump cart then fell and knocked the employee to the ground, fracturing the employee's neck, back, and hip.",1
"An employee fell 2 to 3 feet from a bakers scaffold, suffering  broken ribs.",1
An employee was setting up a carousel when he fell approximately 8 feet and hit his head on the concrete floor. He was hospitalized with head trauma.,1
An employee was leaning over a bucket elevated 10-12 feet by a forklift and fell resulting in two broken wrists and rib contusions.,1
"While dumping a pan of product into a hopper, an employee's body twisted resulting in a broken hip.",1
"On March 24, 2017, at 10:30 a.m., an employee was in a manlift trimming tree limbs with a chain saw when he lost control of it and received a severe laceration to his left index finger. He was hospitalized for surgery.",1
"While standing on a raised lift gate on the back of a laundry truck, an employee fell and broke the right leg in two places.",1
"On March 24, 2017, an employee's foot became caught on telecommunications wires, causing the employee to fall and suffer a fractured hip and bruised right shin.",1
"An employee was descending a ladder when he lost his footing and fell from a few rungs high, breaking ribs and requiring hospitalization.",1
"An employee stepped back and tripped on a coworker's foot, falling to the ground and injuring her right shoulder. She was hospitalized.",1
"An employee was leaving a roof where he was laying insulation when he fell 35 feet through an uncovered hole. He hit several air ducts on the way down and sustained head lacerations, requiring hospitalization.",1
"An employee was working on a plank supported by two A-frame ladders when the plank broke, causing the employee to fall approximately 5 feet and break the right femur. The employee was hospitalized.",1
An employee was cleaning under a loom when the operator restarted the machine. The activated loom then crushed the employee's hand and arm. The loom was not locked out at the time.,1
An employee was moving a metal table on wheels next to another metal table when his right hand was smashed between the two. His pinky finger was avulsed and had to be surgically amputated to the knuckle.,0
"An employee was running a brake press, bending flat aluminum sheets to form louvers. While she was handling an aluminum sheet, her right hand slipped and went toward the point of operation, which had a press knife. When she pulled her right hand back, the press knife amputated her right middle fingertip.",0
"An employee was attempting to clear off some pellets from a transfer line when his right hand was caught by a rotary valve, amputating his middle and ring fingertips above the bone.",1
"An employee was attempting to clear a potato jam in the flume area when he stepped on a potato and rolled his ankle, breaking it.",1
"An employee was surveying a site to install cable when a brick wall from the neighborhood fence came crashing down on the employee. The employee was knocked down by the falling brick and debris, suffering trauma to the facial area, a broken jaw, and several fractures of the sinus cavity and eye socket. The employee was hospitalized and had surgery.",1
"An employee and a coworker were using an air-operated diaphragm pump and hose to transfer hot cooking oil from a fryer into a travel tote. 
The employees made the connections, turned on the air supply to the pump, and commenced pumping. After a few minutes, the discharge hose split due to the temperature of the oil (approximately 250 degrees) allowing the oil to splash the employee. He suffered third degree burns on his hands, abdomen, groin, and lower extremities.",1
"An employee was removing a 4"" valve with a flange. As he was removing the valve, his right pinky finger was caught between the flange of the valve and the pad-I, amputating it at the first joint.",0
An employee was smoothing a wrinkle in paper feeding into the converter machine with her left hand. Her middle and ring fingers were caught in a nip point between rollers removing both nails and some flesh.,1
An employee was moving equipment from a stand to the ground when his right middle fingertip was pinched and amputated between the equipment and the stand.,0
An employee's fingertip was amputated while trying to remove dough from a machine.,1
"On March 25, 2017, at 10:30 AM, an employee was operating a drill press to drill holes in shower shelves when the employee's right middle fingertip was caught on the drill bit. The fingertip had to be amputated up to the first knuckle.",0
"An employee was operating a 10,000 lb. diesel forklift on uneven gravel in a construction zone when the forklift tipped over. The employee struck the ground and suffered head trauma.",1
"An employee was working at the chlorine loading station and was changing out a transfer hose from a railcar. Upon disconnecting the hose, the employee inhaled chlorine, requiring hospitalization.",1
"An employee and a coworker were changing out an actuator cylinder. They were using supplied air to operate the cylinder and align the holding pin by lowering and raising it. The employee aligning the holding pin asked the air supply operator to put air into the line. Afterwards, the employee was checking the alignment when the cylinder dropped and amputated the employee's left middle fingertip before the bone.",1
An employee was operating a piece of equipment when the equipment door struck and injured the employee's left hand.,1
"An employee was walking past a wooden pallet when she tripped over it and fell to the floor, fracturing her hip.",1
"An employee was putting jewelry into a safe as part of closing procedures. As she closed the safe doors, they closed on and amputated her right middle and index fingertips.",0
"An employee was operating a plastic strip collator when her right forearm was caught in the orientation wheel, lacerating and fracturing it. The machine was running and unguarded at the time of the incident.",1
"An employee was operating a pallet rider. When he stepped off the moving pallet rider, it ran over and injured his left ankle.",1
"An employee was using an overhead chain lift to lift a 29-foot-long flat bar weighing 2900 lbs. when the hook holding the chain bent, allowing the flat bar to slip and amputate the employee's left middle and ring fingertips.",1
"An employee accidentally drank sodium hydroxide, believing it was a bottle of water. He immediately spit out the fluid and suffered minor chemical burns to the mouth, requiring overnight hospitalization.",1
"An employee was disengaging a truck trailer when the truck moved, catching him between the truck steps and the trailer. He suffered four broken ribs and a punctured lung. The truck brake was not set at the time of the incident.",1
An employee was working on the 3rd floor when she fell through part of the metal grate flooring that was cut out. She fell to the metal grating the next floor down and suffered punctures to her left and right leg.,1
"Three team members were doing repair work on the bullnose dryer to repair a broken chain on the transfer system. A team member was located on each end of the dryer, with a third team member assisting. They were about 15 to 20 feet apart, trying to get the chain back in place. The team members had completed the proper lock-out/tag-out procedure on the equipment. The injured employee noticed the chain was twisted in the sprocket, so he asked them by radio to stop pulling the chain. While he was unjamming the chain in the sprocket, the team member on the other side pulled the chain, which pulled the injured employee's finger into the pinch point between the sprocket and chain. He suffered an exposure facture of the first phalange of the right index finger.",1
An employee was transferring H piling down a conveyor system when his right pinky finger was smashed between the H piling and the conveyor roller.,1
"An employee was feeding lumber into a header saw when the saw was activated via the foot switch, causing it to cycle and amputate his left ring finger at the nail.",1
"An employee was removing the flywheel from a paver when it came off and came down on his right pinky finger, amputating the tip.",0
An employee was eating dinner with a client at a support meeting when the client's cat bit him.,1
An employee was running the punch press and removing a piece of stamped metal from the press using pliers. The pliers got caught in the machine causing the employee's finger to get caught between the press bed and the pliers. The employee's finger was fractured and the nailbed was removed.,1
An employee was part of a team of deputies apprehending a fugitive on foot. The injured employee scaled a fence and upon impact with the ground suffered a compound fracture to his leg. He was hospitalized.,1
An employee was hospitalized from over-exertion during physical fitness training.,1
"After dumping trash in a dumpster, an employee lost her balance and fell, fracturing her hip and requiring overnight hospitalization.",1
"An employee and a coworker were positioning a wood panel on the bed of a milling machine when the coworker turned on the milling machine vacuum system. The vacuum sucked the wood panel down into the milling machine, and the panel pinched and amputated the employee's right middle fingertip between it and the milling machine bed.",0
"A temporary employee was in an open area being instructed on how to operate a walkie/rider pallet jack. He was attempting to turn the equipment around and drive in a straight line down the main aisle when he ran into pallets that are kept on the endcap of each aisle. His right foot extended over the edge of the standing platform before impact and was injured in the collision, requiring surgery and hospitalization.",1
"An employee was unloading equipment from the bed of a truck when his fall protection lanyard became tangled around his leg, causing him to lose his balance and fall. He broke his leg and dislocated his right ankle while trying to remove his boot, requiring hospitalization and surgery.",1
"An employee was closing the vault door in the bank when the door caught her left index finger. As she pulled her left hand back, her index fingertip was detached and had to be medically amputated.",0
"An employee was erecting steel grate flooring on a tower while wearing personal fall protection. He was repositioning himself to another location when he tripped and fell 30 feet to the concrete surface below, landing on his left shoulder and head.",1
An employee hooked up a chain sling to a section of I-beam so a bridge crew could move it with a crane. He was guiding the material as the crane moved it when the chain sling slid and allowed the beam to roll. His right index fingertip was then caught and amputated between the chain and I-beam.,0
An employee was cutting 2x4s with a circular saw for grout forms. The boards were on saw horses. The saw kicked back and the employee's hand slipped under the saw resulting in amputation of the right ring fingertip.,0
"An employee opened the back doors of his trailer and the metal racks that were inside fell on him, fracturing his right foot, left leg, left elbow, nose, and face.",1
"On March 27, 2017, an employee fell approximately 12 feet through a hole on the furnace deck and struck the floor below, suffering left shoulder, left internal, and facial abrasions that required hospitalization.",1
An employee had welded a clip onto a vent plate. He was using a come-along to straighten the plate when it broke off and lacerated his elbow.,1
"On March 28, 2017, at approximately 11:00 a.m., an employee was cutting around an old water main line in preparation to install a new main when the east wall of the trench collapsed. He was buried up to his waist in dirt from the collapse, suffering a possible hip fracture.",1
An employee was using a chainsaw when it bounced back and severely lacerated his index and middle fingers. He was hospitalized and had surgery.,1
"An employee was standing on a folding ladder painting the overhang of a house when he overreached, lost his balance, and fell to the ground, breaking his arm.",1
"An employee's right hand was caught in a chain/sprocket system between the grain change and unscrambler machines, injuring four fingers.",1
An employee was jet rodding a sanitary sewer line when the jet rod hose ruptured and cut the employee's right hand.,1
"On March 27, 2017, at approximately 12:00 p.m., an employee was on the existing roof of the high school with a coworker, cutting a hole in that roof for the installation of an HVAC unit. He then stepped into the hole and fell to the floor approximately 15 feet below, suffering fractures to his hip and pelvis and contusions to the head and both hands. He was hospitalized.",1
An employee was walking into the canteen to get lunch when she slipped and fell on an area where a customer recently had spilled their food and cleaned it up. She dislocated her patella and fractured a femur.,1
"An employee was picking up trash from the back of a waste collection truck when the employee fell off the back of the truck and struck the ground, suffering head and shoulder injuries.",1
An employee and crew were laying pipe in an easement when the employee backed into the roadway and was struck by the rear wheels of an 18-wheeler. The employee suffered a broken femur.,1
"An employee was breaking a metal conduit to make it fit into a trash cart when the end hit his face, breaking a bone and requiring surgery.",1
"On March 28, 2017, around 1:30 AM, an employee was using an air hose to clean equipment when the hose became wrapped on a steel stand. The steel stand was propping open a metal door. The employee tugged on the hose, which caused the steel stand to move and the metal door to close on and amputate the employee's left middle fingertip.",0
"An employee and a coworker were carrying a sink into storage when the employee tripped on a 4-inch curb and fell, fracturing his right hip.",1
The employee was using a hoist to lift a bundle of steel onto a flatbed trailer. The strap that held the bundle became stuck on one of the latches on the flatbed and the employee attempted to loosen it. The bundle of steel came loose and struck the employee's knee.,1
An employee was making a timber mat when a beam rolled over and broke his right ankle. He was hospitalized.,1
"An employee was inside a stationary scissor lift, loading windows into the lift basket from a wooden box on a nearby all terrain forklift, when he exited the scissor lift to retrieve a window he could not reach and fell 6 to 8 feet to the ground below. He suffered a broken wrist, nose, and back.",1
"An employee was tracing an acetonitrile solution pipeline to verify which pipe was leaking from the pipe rack when he came into contact with the chemical mist. He experienced a headache and signs of exposure to acetonitrile, requiring hospitalization.",1
"An employee was checking the railroad gate when he tripped and fell on a pallet and a pile of glass. He broke four ribs and his sternum, requiring hospitalization.",1
"An employee tripped on the curb and fell backwards, hitting his head on the concrete. He was hospitalized with a head injury.",1
"An employee was cleaning a patch kit machine after use. The employee was using an air wand to blow sand from around the machine. There was a clump of sand that he couldn't get out with the air pressure so he attempted to remove the clump of sand with his hand. At that point, the machine cycled and amputated his left index finger. The machine was guarded at the time.",0
"On March 25, 2017, at approximately 2:30 a.m., an employee was cleaning off the sealers on the vertical bagger machine when the machine actuated and crushed the employee's finger between two sealers resulting in a partial amputation.",1
"An employee was removing a valve end cap that was located on the front of the temperature control skid of a reactor when steam and hot water exited the end of the pipe and caused second degree burns to the employee's left arm, leg, and side of the body.",1
"An employee was lifting material with a 10-ton overhead crane when the load became unbalanced, swung, and struck the employee knocking him to the ground. The employee sustained a compound fracture to the right radial bone.",1
"An employee had just changed out a filter on the water treatment system. As he was putting the water treatment system back online, the stand that the filter sits on cracked and shifted, causing the filter to come down on and break his left arm.",1
An employee smashed his left pinky finger while pulling the lever of a 6-yard tilt dumpster. Half of his finger had to be medically amputated.,0
An employee was changing the die press brake when the machine re-cycled and amputated her right index finger.,0
An employee was cleaning a roll-forming machine when her right hand was caught between two rollers. Her right middle finger was crushed and had to be amputated. The machine was not locked/tagged out at the time of the incident.,0
"An employee was pulling out a strapper from the home position when the strapper came loose, striking the employee's right middle finger against a stationary frame. The employee suffered a broken right middle finger and was hospitalized.",1
"An employee was working under the trailer of a truck, bleeding the air lines, when the trailer slipped off the jack, fell on him, and broke his ankle.",1
An employee was descending an 8-foot A-frame ladder when he slipped on the second or third step and hit his head on the floor.,1
"An employee slipped on a landscaping stone in the parking lot and fell, breaking her hip and requiring hospitalization.",1
"An employee was conducting electrical line maintenance and was using the fixed steps of a bucket truck when he fell about 6 feet to the ground, suffering a compression fracture to his upper back. He was hospitalized.",1
"An employee was driving a cart when he was struck by a moving front-end loader, suffering nerve damage to the leg.",1
An employee was reversing a standup forklift when his left foot was caught between the forklift and a pole. He suffered an abrasion to his left foot/lower leg.,1
An employee was changing a light bulb when the globe around the bulb broke. The broken glass then amputated his fingertip.,0
An employee was shot in the right leg by a gun that went off as she reached back to grab it.,1
"An employee was using a hose to unload a tank of hot asphalt when the hose broke, allowing the asphalt to splash and burn the employee.",1
"An employee was using a hot tap device to drill a pilot hole into a steel pipe that had green liquor flowing through it. After drilling the pilot hole, the employee was attempting to withdraw the drill bit/holder beyond the ball valve, so the valve could be closed. While the employee was withdrawing the shaft, a coworker was trying to close the valve, but could not get the valve handle to turn. The employee continued to pull the drill bit out of the piping until the shaft came out of the device, allowing green liquor to spray him and burn his chest and side.",1
An employee was unloading a hold when his leg was pinned and injured between an I-beam and wire coils.,1
"An employee was moving a steel beam to a truck with an overhead crane. The employee attached the crane hook into a bolt hole at one end of the steel beam to be moved. The steel was lifted and lowered to dunnage. The steel beam slipped from the dunnage and pinched the employee's left thumb, requiring hospitalization.",1
"An employee was struck by a vehicle while grouting a manhole, suffering multiple fractures and lacerations to the face and left knee.",1
An employee was cleaning out a trailer and fell three to four feet from the trailer onto a guardrail resulting in broken ribs and a punctured lung.,1
"An employee was helping to erect a balloon wall when the metal tie down straps gave way, causing the balloon wall feet to kick out and the wall to fall on him. He suffered a fractured vertebra and was hospitalized.",1
"An employee was exiting a patching truck while holding onto a ladder rack. The employee's ring became caught in the rack, resulting in an avulsion or degloving injury to the ring finger.",1
"An employee was cutting a band from a bundle when the bars started to roll. The employee tried to brace himself, but his hand went out toward the bars and his fingertip was pinched and partially amputated between two bars.",0
A trainee fractured his distal wrist while attempting to take down drywall with his hands.,1
"An employee was attacked by two dogs while delivering the mail resulting in bites to the hand, arms and chin requiring stitches and a broken arm.",1
"An employee was lowering a box of clay pigeons into a container when the container lid fell on his left middle finger, resulting in an amputation without bone loss.",0
"An employee was using an overhead crane to move a 3/8"" thick, 3' x 10' piece of steel plate. There was a chain on the crane hook, which was attached to an eye bolt for moving the steel plate. The steel plate came off the crane hook, bounced off of a bench, and struck the employee in the leg. The employee was hospitalized with a broken leg and had surgery.",1
An employee was loading a climate controlled trailer with palletized product and experienced back pain. The employee suffered a slipped disc in the lower back resulting in a pinched nerve.,1
A derrick on a workover rig fell and struck an employee in the head. He was wearing a hardhat at the time.,0
"On March 29, 2017, an employee became engaged in a physical altercation with a coworker that resulted in hospitalization for cuts and bruises.",1
A truck driver was delivering product to a store and suffered a heart attack.,1
An employee was exiting a bus and broke their ankle in two places.,1
An employee suffered a right ring finger distal amputation while operating a sheeter machine. The machine was guarded at the time.,0
An employee was cutting a piece of aluminum with a rotary saw when it kicked back and amputated his left index finger.,0
"An employee was operating a ram packer machine when his arm was caught in a pinch point and his right forearm was punctured by part of the machine, requiring hospitalization.",1
An employee was operating a disc sanding machine when the tips of the left index and middle fingers were amputated.,0
"On March 29, 2017, an employee was clearing out jammed material in a machine when his hand was caught in the air lock. The rotating fan blades partially amputated his second, third, and fourth fingers on his right hand.",0
"An employee was installing metal panels on a residential roof while wearing fall protection (harness, tied off to roof anchor) when he lost his balance and fell. The roof anchor failed, and the employee fell approximately 14 feet to the ground, bruising his vertebrae and requiring hospitalization.",1
"On March 29, 2017, an employee was moving a roll of steel coil with a coil caddy and crane. The employee saw the coil tipping and tried to stop if from tipping over. As the coil tipped, the employee's left hand was caught between the coil caddy and steel coil, amputating the first and second fingers and breaking the third finger.",0
An employee was operating a press brake to flatten metal plates. The metal plate was held in place by a hoist hook. The hook slipped off the metal plate causing the metal plate to strike the employee's right arm. The employee was hospitalized for surgery to repair a broken right arm.,1
"On March 29, 2017, an employee was troubleshooting an overhead door opener when their left finger became caught between the chain and sprocket of the side mounted overhead door opener, resulting in a left pinky fingertip amputation.",0
"An employee was driving a tractor trailer and exiting the employer's facility when the tractor trailer was struck by a train at a rail road crossing. The employee suffered a brain bleed, back fracture and other injuries.",1
An employee was manually feeding sheet metal into the roller when his right hand was caught in the sheet metal roller and crushed four fingers.,1
An employee was performing framing activities from a 6-foot step ladder and fell resulting in injury requiring hospitalization.,1
An employee suffered a crushing injury to the hand from a rebar shear.,1
"An employee was working to install a box culvert. He was walking across a stream when he slipped and fell onto a hardline discharge hose from a pump, suffering internal bleeding.",1
An employee was cleaning out the cluster machine (mixer) while it was running and amputated a fingertip.,0
"An employee was preparing an IBC container for recycling when the ethanol that was in the container ignited and burned the employee's arms, chest, and legs.",1
An employee was setting up the seamer to weld two pieces of metal together when an object hit and shattered the employee's jaw. The employee also suffered a concussion.,1
"An employee was troubleshooting a conveyer belt when his left hand became caught in the chain and sprocket. He sustained amputation of his left pinky finger, partial amputation of his left index finger, and crushing injuries to his left middle and ring fingers.",1
An employee was hospitalized with extreme dehydration.,1
"An employee was inspecting a worksite when his leg fell into a hole. He struck the wooden cover on the opening and fractured his ribs, requiring hospitalization.",1
"An employee was using a Kevlar Rope wrapper to install Kevlar fabric onto a roller. The control was fixed so the machine continued to run while the employee adjusted the Kevlar fabric. Both of his pinky fingers were caught between the Kevlar rope and the metal roller, tearing the skin at the base of one if his left fingers that required surgery and fracturing one of his right fingers.",1
"An employee was placing items into a baler (cardboard crusher). When she turned and walked away, she fell to the floor. She was hospitalized with a shattered tibia and fibula in her right leg.",1
"An employee was installing a placard on a shipping container when he fell 16 feet. He bruised his forehead and broke his arm and left wrist, requiring surgery.",1
"On March 30, 2017, an employee was standing on a three-step ladder torching a roll off box when a piece of steel fell and struck his helmet, knocking him to the ground. The employee fractured the left hip/pelvis area and was hospitalized.",1
"An employee was performing maintenance on a conveyor belt wrapping machine when his right arm became caught in the belt. He sustained compound fractures in his right arm, fractured both ankles and lacerations to his head and face.",1
"An employee was troubleshooting a piston machine and amputated the right index and middle fingers. The machine was powered down, but had not yet stopped spinning.",1
An employee was on a ladder at the mid-span making a connection between the customer and the telecom line. The employee cut the line and tension that was released from the cut wire caused the employee to fall off the ladder. The employee suffered a collapsed lung.,1
An employee was reading a meter at a residence when she was bitten by a dog and suffered the amputation of her right pinky fingertip.,0
"An employee was using a wooden handled cant hook to move a wooden pole. The handle broke causing the employee to fall backwards, twisting and breaking his right ankle.",1
"An employee was delivering packages, slipped, and fell fracturing two hip bones.",1
"An employee was cleaning a blender machine and amputated his left ring finger, a portion of his left middle finger, and lacerated his left index finger. The blender machine was operating at the time of the incident.",0
An employee was unloading freight from a silage trailer at a customer location. The silage trailer had a moving floor inside that runs on a web conveyor belt. The employee opened the door in front of the trailer when the web conveyor (PTO) was operational and got caught in the conveyor. The employee's left arm was amputated.,1
An employee was cutting framing materials with a fillet cutter and amputated his right index fingertip.,0
"An employee was conducting a test on a valve, located on a trolley system. The valve is hydrostatically tested. The valve fell off the trolley system and landed on the employee, resulting in amputation of the employee's index and ring fingers.",0
"On March 30, 2017, an employee was guiding a ply of paper into the winder machine when his right hand was caught under the machine belt, amputating part of his right thumb and index finger.",0
An employee was grinding meat using a meat grinder and amputated the left index finger.,1
"An employee was installing ground rod, slipped, and injured his left palm.",1
"On March 30, 2017, an employee was walking across the parking lot when she tripped over a trailer hitch, fell, and suffered a broken bone.",1
"An employee was dumping trash, tripped and fell fracturing his hip.",1
"An employee was walking in an area where a floor cleaning agent had recently been applied, when she suffered an allergic reaction and difficulty breathing and was hospitalized.",1
An employee was moving product with an electric pallet jack and pinned his left foot under the racking system beam. The left foot was fractured and lacerated.,1
"An employee was unloading a pallet on a truck. He lost his balance and fell to the ground, suffering a broken bone.",1
"Three employees were in a large interior area underneath a concrete silo. They were moving a screw conveyor housing out of the way in an area where they were planning to install a new screw conveyor flight. As they pushed the screw conveyor housing across the concrete floor, the front vertical angle iron support broke at the welded connection to the housing. As the housing fell approximately 21 inches to the ground, the injured employee's right foot was caught underneath and fractured. The injury required surgery and hospitalization.",1
"On March 30, 2017, an employee was operating a press and suffered a partial amputation of the right middle finger.",0
"An employee was installing precast concrete fence panels when a panel fell onto his right hand, crushing his right index, middle and ring fingers.",1
An employee was removing stickers from duct work when they fell off an 8-foot ladder and suffered a concussion and bruises to the shoulder and back.,1
An employee was lifting a pallet when the pallet fell on their hand and wrist. The injury required surgery to relieved the pressure and swelling.,1
An employee was observing delivery of equipment from a truck using the power lift gate. The equipment became unbalanced and fell off the lift gate striking the employee and knocking him backwards. The employee sustained a fractured right knee and a tendon injury.,1
An employee was removing some branches from the concrete driveway of the business. The branch that she was pulling broke causing her to fall backwards and break her elbow. She also suffered a contusion to the back of her head.,1
An employee was clearing the notching machine when his left hand was amputated.,1
An employee was repairing a switch panel and received third degree burns to his hands and face from an arc flash.,1
An employee was riding on the rear load yard waste truck and fell off resulting in a head injury.,1
The injured employee was loading bundles of shingles onto a conveyor and sending them up to his partner who was stocking the bundles on the roof. The injured employee stepped onto the pallet to reach for the last bundle and the wood pallet broke. The injured employee lost his balance and fell off the truck bed to the concrete driveway below resulting in a fractured left heel.,1
"Employees were guiding a metal light pole from its base to the ground. As the employees were guiding the light pole, the top portion of the light pole came in contact with a 7200v overhead power line. All three employees received burns to their hands and one employee received burns to the upper torso.",1
An employee finished loading a trailer and exited the trailer via the trailer stairs. The employee slipped on the stairs and fell breaking her left wrist. The employee was hospitalized for surgery.,1
"An employee was moving patients to the dining room when she tripped over a patient's wheelchair leg rest, fell, and suffered a bone fracture.",1
"An employee was on the roof inspecting it for an insurance claim, slipped and fell off the roof resulting in broken wrists and vertebrae.",1
"An employee was testing a new matrix for respiratory care when a valve closed on the employee's right middle finger, amputating the fingertip.",0
"On March 30, 2017, an employee was pulling an aluminum extrusion on the table when the table jogged and injured his left wrist. He was hospitalized following complications to the wrist injury.",1
An employee was loading an exhaust fan on a flatbed truck when his left shin hit the fan and was lacerated.,1
"An employee was using a pipe wrench with a cheater bar to tighten a nipple when the pipe wrench broke and the cheater bar struck the employee's head, causing blunt force trauma.",1
"An employee was working on a railhead and loading railcars. As he was pulling himself up on a railcar, he slipped and fell off, fracturing his right femur.",1
"An employee was exiting a golf cart when she tripped, hit her head on a wall, and then fell on her left knee. She suffered a left knee fracture and a concussion.",1
An employee was operating a baler machine.  The employee installed a new spool of baling wire on the back of the machine and then threaded the new wire through the eyelets and was twisting the new wire onto the old wire when the machine cycled severing his left hand. The machine was not guarded at the time.,0
"An employee was preparing to tarp the load in a single drop trailer. The employee walked up the ramp in the back, slipped due to rain, and fell approximately 37"" resulting in a broken elbow and hip.",1
"While attempting to unclog a floor drain, the employee turned and stepped into the drain that contained hot water causing first and second degree burns to the lower right leg.",1
A temporary employee was operating a reach truck and struck a rack resulting in amputation of the left thumb at the first knuckle.,0
"While unloading a reel of wire with a pallet jack, the wheels of the pallet jack rolled off the truck's lift gate causing the wire and the pallet jack to flip over onto the ground and strike the employee's ankle and fracturing it.",1
An employee was unloading drill rods when their gloved right hand got caught in the boring machine and was injured.,1
"An employee was walking around a work station, tripped on a table and fell breaking the right elbow.",1
An employee was walking down a grassy hill after delivering a package to a residence and fell fracturing her ankle in three places.,1
An employee was using a scraper to remove and clean dough off a mixer and caught a finger in the spinning chain and sprocket severing the fingertip. The mixer was not locked out at the time.,1
"An employee slipped and fell from a ladder while cleaning, suffering a broken left leg.",1
"An employee was unstrapping a tarped load on a flatbed trailer when the tarp became caught on the load. At the time of the incident, it was raining heavily. He was attempting to remove the wet tarp when he slipped on it and fell from the trailer, injuring his back.",1
"An employee was polishing a shaft with an emery cloth while the shaft was spinning in a lathe when the emery cloth caught on a bur and pulled his right thumb into the machine, partially amputating it.",1
"An employee was cutting a fallen tree that was laying on a telephone cable. When the tree was cut, pressure was released on the telephone cable, which sprung back up and threw the limb toward the employee. He suffered a contusion to the right side of his face.",1
"An employee was lifting sheet metal bundles with a crane. He intended to separate and pass a strap between two bundles. 
The top one fell and trapped his left middle fingertip, amputating it with no bone loss.",0
"While climbing into the cab of a semi-tractor, an employee fell backward onto the pavement and struck their head. The employee was hospitalized with an internal hemorrhage.",1
"While performing wood framing activities, an employee fell through a floor hole and struck the ground, suffering broken ribs and a punctured lung.",1
"An employee working in a gas station kiosk noticed a hose at a gas pump was not hung up correctly. As he attempted to go fix the pump, he tripped and fell to the pavement, fracturing his hip.",1
"An employee was walking to a patient's room when a bug ran toward her. As she was moving away, she backed up, lost her balance, and fell, fracturing her right ankle and requiring hospitalization.",1
"While lifting a crate, an employee suffered a compression fracture to the lower back, requiring hospitalization.",1
An employee was climbing a straight ladder when it slipped out from underneath him. He fell to the ground and fractured his right hip and ankle.,1
An employee fell off a truck while inspecting it and he was knocked unconscious. He was hospitalized.,1
"An employee was using a winch to collect waste material in a rear load trash truck. As the winch was retracting, he held the winch cable to one side away from a cable bracket with his left hand. His left index finger was then caught between the cable and the bracket, amputating his fingertip.",0
"An employee was working from an extension ladder to repair an overhead garage door when the bottom of the ladder, which was positioned on a dry floor area, slid outward. The employee fell approximately 9 to 10 feet with the ladder, suffering fractures to the right and left arms.",1
"An employee was hand-felling a 4-inch diameter tree on an energy transfer gas line right-of-way when the tree trunk kicked back and struck him in the jaw, breaking it.",1
An employee was hospitalized with allergic bronchitis due to a possible inhalation of peracetic acid (PAA).,1
"On March 31, 2017, an employee was moving a tarp on his tractor-trailer when he strained/sprained his back, suffering severe pain and requiring hospitalization.",1
An employee was manually lifting individual pieces of scrap metal and throwing them into a metal bin when he was struck in the right eye by a metal rod that was ejected from the bin. He was wearing gloves and eye protection at the time.,1
An employee was standing next to a conveyor and caught her foot on a dolly. The employee fell and fractured her kneecap.,1
A truck driver was stabbed while at a gas station and was hospitalized.,1
"An employee was working on a pouch line tank when a coworker opened the valve at the bottom the tank, releasing the 197-degree water. The water caused second degree burns to the employee's right leg and foot.",1
"On April 1, 2017, an employee caught her ankle on a push cart and fell, suffering knee and head trauma. She required surgery and hospitalization.",1
"An employee tripped over a floor dolly and fell to the floor on his right hip, fracturing it and requiring surgery.",1
"An employee was loading a wheeler with products from a truck. The employee went back into the truck to organize, moved toward the back of the vehicle, and then fell 33 inches to the ground, suffering back and leg injuries.",1
"An employee was setting up a steel bar on a lathe and tried to move the steady rest, which was open. When contacted, the top part of the steady rest fell onto and broke his right hand. He was hospitalized for surgery.",1
"An employee was pulling cases to put on a cart when he tripped and fell, injuring his right lower arm.",1
"An employee was painting a newly paved road when a vehicle struck him, breaking both of his legs and one of his shoulders.",1
An employee was retrieving merchandise from a walk-in cooler when a powered industrial truck ran over her left foot.,1
"An employee turned the corner walking around a cooling blanket machine in the hallway. Her foot was caught on the blanket's clear tubing and she tripped and fell, landing on her left side chest wall and left wrist. She sustained a left chest wall contusion, left wrist sprain, and collapsed left lung.",1
"An employee was troubleshooting a switch gear when an arc blast/flash occurred, burning his face.",1
"An employee fell approximately 12 feet from a ladder while attempting to access the roof, suffering broken ankles.",1
"An employee was outside of his tow truck helping a customer with a tow in the breakdown lane when he was struck by a car, breaking his pelvis.",1
"An employee was exiting a vehicle when it started to move, causing him to lose his balance. He fell backward and hit his head on the ground/concrete, busting his eardrum. The parking brake was not engaged at the time of the incident.",1
"An employee was injecting a cow with antibiotics when the cow began chasing him. As he was running from the cow, he fell to the ground, breaking his leg and kneecap.",1
"An employee tripped over a flatbed and hit his head on the floor, suffering head an neck injuries.",1
An employee was loading metal racks into a trailer using a lift truck when the employee's left foot was caught and fractured between the lift truck and the metal rack.,1
"An employee was operating a forklift while moving pallets in a warehouse. While he was backing up the forklift, his right hand was on the frame of the overhead guard. His right hand then made contact with a parked trailer, severely lacerating his fingers.",1
"An employee's left index finger was severely lacerated while helping another employee clear a clogged mower chute on a commercial zero-turn lawn mower. The mower was turned off and the cutting blades disengaged, however the blower fan was still moving when the injured employee's  left hand entered the blower fan. The finger had to be amputated.",0
"An employee slipped while working on a fry station. He put his hands down, and his right forearm and hand were burned by the fryer grease.",1
An employee was performing rig-down operations for an oil drilling rig when a large cylinder fell and crushed the employee's right leg below the knee resulting in amputation.,1
An employee was trying to get sand to flow through a slot gate when it closed and amputated two of the employee's fingertips.,0
An employee was cutting meat on a meat cutter when the blade cut his thumb (no amputation). He was hospitalized overnight.,1
"An employee was descending a ladder when his foot slipped off the rung. He fell 15 feet to the concrete below, dislocating his knee.",1
"An employee was restocking a freezer using a stand-up forklift. He was turning the forklift and reaching for a product when his left middle finger struck a metal beam, fracturing it.",1
"An employee was walking in the warehouse, tripped over a pallet and fell injuring her left knee.",1
"An employee was on a ladder against the roof when the ladder slipped, causing him to fall to the ground. He sustained fractured vertebrae in his back and was hospitalized.",1
An employee was cutting a 45 degree elbow on a 10 inch pipe with an oxyacetylene torch while working on an elevated platform about four feet above the ground. A hot metal flash back occurred and the employee received second degree burns from his chest to the waist and third degree burns on the lower left side of his abdomen. The employee was wearing a harness and PPE at the time of the incident.,1
An employee was grabbing dividers that were stored on top of a cooler. The employee fell 12 feet to the ground and was hospitalized for head and back trauma.,1
"On April 3, 2017, an employee was operating a tractor and brush got under the brake pedal. The operator could not stop the tractor and struck a fence resulting in leg contusions.",1
An employee was operating a press brake and suffered broken fingers. The employee was removing shims from under a four-way die on the press brake when the dies shifted and pinched the employee's fingers.,1
"An employee was processing returns and moving 3-pound plastic totes by hand. He picked up an empty tote to stack it and hurt his lower back, requiring hospitalization for severe back pain.",1
"An employee was working from a motorized order selector disassembling racking. A support beam fell striking the employee working from the order selector. The employee then fell from the order selector to the concrete floor resulting in broken bones. The employee was wearing a body harness connected to the order selector, but still made contact with the floor.",1
An employee became ill after participating in physical fitness exercise. He experienced cramping and nausea due to heat and dehydration.,1
"An employee was working from an order picker and fell 52"" to the concrete floor, breaking his left arm and hip.",1
An employee was cleaning saw dust from a wood chop saw. The power was turned off but the blade had not come to a full stop. The rotating blade then amputated his left pinky and ring fingers.,1
The injured employee was setting cribbing for the landing of c-channel shaped metal material on the ground. The injured employee was standing next to the powered industrial truck that held the stacked material that was going onto the cribbing when the stacked material rolled onto the employee's left leg resulting in a fractured ankle.,1
An employee was driving a forklift that overturned on him. The employee's left leg was caught by the forklift's mast crushing his toes which were amputated at the hospital. All five toes on the left foot were amputated.,0
An employee was removing rigging from cargo that was just unloaded from the ship and pinched his left index finger between the shackle and the pad eye when the rack shifted. The employee was hospitalized. The finger was not amputated.,1
"The injured employee was cleaning the lower plates of a printing press with a towel wrapped around his right hand. A second employee was cleaning/setting up the upper portion of the press. The injured employee's hand was pulled into the press, due to the towel; partially amputating his right thumb and crushing the right ring finger.",0
"Employees were setting a descaler ring into a housing unit. After the descaler ring was put into the housing, the crane began moving away and struck the housing unit which fell over and struck the injured employee who suffered neck and back injuries.",1
An employee was using a table router to trim a part when their finger was pulled into the blade resulting in amputation of the left index fingertip.,0
An employee was opening the lid to the vacuum hopper. The lid slipped out of his grasp and fell crushing his left index finger between the lid and the hopper resulting in amputation of the fingertip.,0
An employee was cutting material with a miter saw when the blade amputated his left index finger at the first knuckle.,0
An employee was connecting a dolly to a trailer. The dolly rolled forward and the employee's hand was caught between the pintle hook and metal plate of the trailer resulting in crushed and broken left pinky and ring fingers.,1
"An employee was spotting for a sanitation truck driver as he was reversing his vehicle when the truck tire ran over the employee's left foot, fracturing it and requiring hospitalization.",1
"An employee was riding on back of a garbage truck, dismounted the moving vehicle and fractured his left hip.",1
An employee was reaching in front of his weapon during qualifications when the weapon discharged amputating the first digit of his left index finger.,0
"An employee was performing training while on a combination ladder when the ladder slipped out from under him, causing him to fall to the floor. He injured his left arm and elbow.",1
"An employee was leveling off debris from a trash box directly underneath the airlock system when the employee's hand was caught in the airlock, amputating the left index finger distal tip.",0
"On 4/3/17 at approximately 10:20 AM, an employee was operating a bandsaw in the meat department and amputated a fingertip.",1
"An employee was walking, tripped over a pallet on the floor, and fell resulting in a knee injury.",1
"On April 3, 2017, an employee was adjusting a roll of plastic material being fed into a thermoforming machine while standing on a small metal grated platform. The employee stumbled and the employee's hand was caught in a pinch point where the machine chain drew the material in, resulting in amputation of the right middle fingertip.",0
An employee cut his fingers while using a circular saw.,1
"An employee was operating the boom truck and received injuries to the chest, ribs, and shoulders when the truck rolled over onto its side and over the employee.",1
"An employee leaned into a slitter machine throttle while clearing stuck material, crushing his left wrist and lacerating his left hand and right pinky finger.",1
"A customer brought a car with transmission issues in to be washed. The car went through the car wash and an employee pulled the car forward and put it in park, but the car was actually in drive due to the malfunctioning transmission. The car moved forward and struck another employee fracturing his left leg.",1
An employee fell four to five feet off an extension ladder resulting in a broken lower right leg.,1
"An employee was stepping down off the top step of a ground belt-loader, missed a step and fell fracturing his left hand.",1
An employee was operating a motorized pallet jack and fractured the left ankle when it became lodged between the pallet jack and the upright at the end of the bay.,1
An employee was taking a pulp sample from a washer when steam from the shower header (used to spray over the pulp to clean) caused second and third degree burns to her right arm and hand.,1
The employee was beginning the clean-in-place process. The employee disconnected the air line which de-energized the valve causing it to close on the employee's right index finger and amputate the fingertip.,0
"An employee was unloading merchandise from the back of a trailer and was struck by a door that he was unloading, knocking him unconscious and causing him to fall to the ground. The employee suffered broken ribs and was hospitalized for treatment.",1
An employee was emptying trash cans into a garbage truck hopper and was struck by an oncoming delivery truck resulting in a broken left arm and two broken teeth.,1
"On 4/4/17, an employee was walking on the conveyor cleaning edge, slipped and fell fracturing the right leg.",1
An employee was turning a valve when he slipped and fell into an uncovered hole containing storm water that had become very hot due to steam lines that ran through the area on a wash pad near hydro blasting activities. The hot water burned the right side of his body.,1
"An employee was applying tape to metal flashing on a flat roof approximately 12 feet high. The employee fell from that roof and was hospitalized for a broken right toe, bruised ribs and a sprained right arm.",1
An employee was using a manual paper cutter and aligning the material to be cut when the cutter arm fell and lacerated the employee's left hand middle finger. The fingertip was amputated in order to close the wound.,0
"An employee was descending a five foot ladder, missed the last step and fell approximately two feet to the ground resulting in a fractured right tibia and a fractured left fifth metatarsal.",1
"An employee was performing his inspection rounds and lost his balance while transitioning from a dirt walking surface to a step and fell sustaining injuries to his ribs, lower back, head, left wrist and both knees. The employee was hospitalized for a brain hemorrhage.",1
"Two employees were using a manlift to paint the bridge approximately 30 feet above the ground with an identified, energized, electrical power line running parallel to the bridge containing 12,000 volts of electricity. Either the manlift basket made contact with the electrical power line or the power line arched and made contact with the manlift basket resulting in injury to one of the employees. The employee suffered first and third degree electrical burns to his right arm, stomach and back.",1
The employee was descending from the basket of a boom truck when his left ring finger was caught in a bracket that held the bucket to the truck resulting in amputation.,0
An employee was using a 4x4 to lift a container of paint and suffered a strained back.,1
An employee was climbing onto a trailer when the hook the employee was holding broke off. The employee fell to the ground tearing their ACL and suffering a head injury.,1
An employee suffered the amputation of the left index finger while trying to dislodge a piece that was stuck in the die of the machine.,0
An employee was moving a girder and was pinched between a girder and a piece of steel resulting in a broken pelvis.,1
An employee was operating a printing press and amputated two fingertips in the rollers while removing debris from a roller.,1
An employee was transporting ice from the lower level to the first floor when the employee fell.,1
An employee was leaning on a glass tabletop desk when the glass broke and lacerated his left hand and finger.,1
"An employee was carrying an aluminum pan full of hot water and lost control of the pan resulting in burns to the arms, chest and left hand.",1
An employee was speaking to a fellow employee. Her right ankle gave out when she turned in the hallway and she fell striking her shoulder on the wall. The employee was hospitalized for a fractured left humerus and left patella.,1
An employee was installing duct work from the rafters in the attic when he lost his footing and fell to the ground landing on his head and shoulder.,1
An employee was taking bags off a pier and loading them onto a cart when the employee dislocated their right knee.,1
An employee amputated the left pinky finger above the first knuckle in a bushing machine.,0
An employee was working on a mill press and suffered a fingertip amputation.,0
An employee was cutting down a plastic part when their right thumb came in contact with the moving blade of a band saw resulting in a severe laceration.,1
"An employee was replacing switches on the outriggers of a digger derrick. After the employee replaced the switches he adjusted the outriggers. The employee placed a bolt in the access hole of the outrigger to adjust it and pulled the lever to raise it. As the outrigger came up, it caught his right middle finger between it and the bolt, resulting in a fingertip amputation.",1
An employee was cutting a circle from a piece of plywood using a circular saw when it kicked back and lacerated his right toe and the one next to it. The employee was hospitalized.,1
An employee was working at a pairing table when the steel slipped off of the table and struck the employee's leg.  The employee was hospitalized for a fractured tibia.,1
An employee suffered an asthma attack while checking a delivery.,1
"On April 3, 2017, at 11:55 a.m., the injured employee and three other employees were transporting a decommissioned, pumped out, triple rinsed steel metal tank, 4' x 5' x 4' using a forklift to a metal recycling roll-off container located outside behind the plant. The injured employee was guiding the tank with his hands when the rest of the crew was attempting to place the tank into the roll-off container. The tank slipped off the forks and crushed the injured employee's left ring fingertip pad between the tank and metal container wall, amputating the left ring fingertip pad.",1
An employee was drilling holes into steel when his glove was pulled into the drill resulting in a finger amputation at the knuckle.,0
An employee was running a 30-minute boiler test on a diesel fueled boiler and caught the fingers on their right hand in the spinning belt and pulley. The boiler's diesel pump had been turned off but the belt and pulleys were still spinning. The employee's right middle finger was amputated below the first joint. The guard was not in place at the time.,0
An employee was assisting an operator with plasma cutting when a metal splinter went through the employee's glove and into his right thumb. The employee was hospitalized for an infection.,1
An employee tripped on a curb near the mailbox causing her to fall to the ground and fracture her right leg.,1
An employee's left index fingertip was partially amputated while placing livers into position on the giblet harvester.,0
An employee was cutting wood on a table saw when the blade partially amputated three right-hand fingers.,1
An employee was retrieving a box that fell on the floor from the mail slot used for the pre-made boxes when her hair was caught in a moving conveyor used to load boxes into a trailer. The employee was treated for a partial scalping.,1
An employee was lifting the engine compartment door of a tank when it slipped out of his left hand. He attempted to catch the door with his right hand and crushed his pinky finger resulting in amputation of the fingertip.,0
An employee was opening the swivel step of a trailer and injured his right pinky finger.,1
An employee was cutting lumber to make a form for a concrete slab. The saw kicked back and cut the tip of his right index finger resulting in amputation of the fingertip.,1
"An employee was picking up returns, tripped over a box of diapers, and fell.",1
"An employee received second and third degree burns to the hand, neck, ear and foot when molten copper contacted water and ""popped.""",1
"An employee was performing maintenance on a setting tool used in hydraulic fracturing. He opened a vise and turned the tool 180 degrees to make it easier to service. As he was sliding the tool back into the vise, the tool fell and caught his finger between the tool and the vise, amputating his left middle finger below the nailbed.",0
An employee was removing a 360 lb. block of cheese from the cutting harp and suffered an amputation injury to the left hand.,0
"An employee was cleaning a conveyor belt with a dust rag when the conveyor caught the rag and pulled her finger into the belt, amputating her fingertip.",0
"An employee was cleaning the dining/kitchenette area. When she stepped over a rope barrier, she tripped and fell, fracturing her right knee.",1
"An employee was walking through the store to return a piece of merchandise when she slipped on an N-cap and fell, fracturing her hip.",1
"On April 5, 2017, an employee was disassembling a setting tool when the employee's right third finger was caught in the tool, partially amputating the fingertip.",0
The bottom of an employee's right foot was burned when molten iron spilled over the mold and into the employee's boot.,1
An employee was repairing a kettle motor and amputated the right pinky finger when it was caught between the belt and pulley while putting the belt back onto the machine.,0
"An employee was working in the valve box of a railroad car when the manway lid fell on his left hand, amputating his thumb.",0
"An employee was exiting the office, lost her balance when her foot got caught on the carpet, and fell breaking her left hip.",1
"An employee was cutting fabric strips on a strip machine when it jammed. While trying to clear the jam, the machine's blade came down and lacerated and fractured the employee's left index finger and thumb.",1
An employee was applying fertilizer and got an arm caught in the spinners of the fertilizer truck.,1
An employee was riding a bike when a sign flew into his face causing him to lose control and fall off the bike hitting his head on the road.,1
"An employee was relocating a parking sign. While digging the relocation hole, the employee made contact with a cracked, buried PVC pipe. The employee initially thought it was irrigation piping, but upon closer examination saw electrical wiring and received a shock while attempting to isolate the exposed wiring.",1
An employee fell down the stairs of an MRAP vehicle and injured their knee.,1
An employee was cutting plywood using a powered saw and suffered a partial amputation of the left ring finger.,1
"An employee was inspecting a 480v smart meter for repair and suffered third degree burns to the face, chest, hands and legs from an arc flash.",1
An employee was swinging a sledgehammer while removing tracks from the excavator and suffered chest pains.,1
"On April 5, 2016, at around 11:00 AM, an employee and a coworker were loosening jam nuts while standing on a tractor hitch. When the employee loosened a jam nut, he lost his balance and fell backwards approximately 3 to 4 feet, landing on his back. He suffered a collapsed right lung and 2 or 3 fractured ribs.",1
An employee was driving a ground rod down with a ground rod driver when the driver came off the rod and broke his left thumb.,1
An employee was in an aisle way and was struck by a powered industrial truck resulting in a right forearm injury and pinky finger amputation requiring hospitalization.,1
"An employee was in the bed of a company pickup truck. He was moving a tire on a pallet from the front of the pickup to the rear to make room for more tires in the front when he fell off the rear and struck his head on the ground, suffering a concussion and brain trauma.",1
An employee was riding on the back of the truck. When the truck made a left turn the rider contacted a wall and fell off the truck injuring ribs on his left side.,1
An employee was unjamming product from a machine when the equipment started and the employee's left hand was caught in the auger resulting in amputation of three fingers. The auger guard was not in place at the time.,0
The injured employee was riding in a golf cart driven by another employee. The golf cart struck a bump in the road and the injured employee fell off the cart onto the street resulting in a broken humerus.,1
"On April 5, 2017, at approximately 1:30 a.m., an employee was operating a band saw when the employee's left hand contacted the running blade, amputating the thumb, index, and middle fingertips.",0
"On 4/6/2017, an employee was part of a crew that was lowering a conveyor using a come-a-long. During the operation, the conveyor fell from the rigging equipment and struck the employee, fracturing the right side of his pelvis and shattering the left side.",1
"An employee was using a mounted hand grinder to prepare the bevel on a rim for welding when the grinding wheel broke and lacerated his left index finger, requiring surgery.",1
An employee was walking on plant property when he slipped on wet fly ash and fell resulting in a fibula and tibia fracture.,1
An employee was attempting to dislodge meat from the inside of a meat processing machine when the machine was activtated and amputated several of the employee's fingers.,0
"On April 6, 2017, an employee was cleaning a canning machine when the employee's right index fingertip contacted a rotating auger and was amputated. The machine was running and unguarded at the time.",0
"An employee was removing pipe when the pipe shifted and he fell off the ladder. He fell on top of a floor-mounted motor, injuring his head and lacerating his elbow. He was hospitalized.",1
"An employee was using a pneumatic chipping gun to demolish a concrete foundation when the chipping gun fell from the employee's hands. As he tried to catch it, he fell 8 feet to the ground, suffering fractured vertebrae and a head laceration.",1
"An employee was working inside a building when four shots were fired from outside into the building. The employee was hit, suffering a gunshot wound to the lower abdomen and requiring hospitalization.",1
"On April 6, 2017, at approximately 3:10 p.m., an employee was spotting for a driver who was backing a 3/4 ton truck up to a trailer. The doors to the trailer were open for loading. Using the driver's side mirror, the driver backed toward the trailer. As the truck approached the trailer, the wind caused the door to the trailer to close. The employee moved between the truck and trailer to open the trailer door when his leg was pinched between the truck receiver and trailer bumper. He suffered a contusion to the left calf muscle.",1
"An employee was unloading pipe from a trailer when the employee's right hand became caught between the pipe and trailer, breaking the thumb and causing lacerations.",1
An employee was attempting to push a sandwich through a wrapper machine when his left index and middle fingertips were partially amputated by the wrapper jaws. The machine was guarded at the time.,0
"An employee opened a valve to remove hot oil from a fryer. The hot oil then splashed him, causing second degree burns to his upper and lower left leg and minor burns to his face.",1
"On April 6, 2017, an employee was cleaning the coffee grinder of an espresso machine when a door to the machine's hopper opened. As the employee was attempting to close the door, he made contact with the hopper and the piston came down, amputating his right index finger between the base of his fingernail and the first knuckle joint.",0
An employee was torch-cutting metal when the resulting sparks and slag caught his cotton coveralls on fire. He suffered burns to the back of his legs. Fire-retardant clothing was not worn at the time.,1
An employee was cleaning a build-up of metal shavings on the carrier plate of the double disc grinder when her right middle finger was caught and amputated between a hole in the carrier plate and the rotating disc.,0
A truck was moving forward with no driver and an open door when it caught an employee between the door and the truck cab. The door closed on and severely lacerated the employee's leg.,1
"An employee was loading heavy metal parts on a conveyor when a part fell off the conveyor rack and landed on the employee's hand, fracturing fingers.",1
"On April 6, 2017, at 8:20 AM, an employee was cleaning machine rollers when the employee's glove became caught in the rollers, which then pulled in and de-gloved the employee's right hand. The machine was running at the time of the incident.",1
"An employee was emptying a trash dumpster into a 30-yard, roll-off container at the loading dock when the dumpster started falling into the container. The employee attempted to catch the dumpster when it slid down and amputated the last digit of his ring finger between the dumpster and roll-off container.",0
"While going to grab a wheelbarrow, an employee stepped and fell through rotten metal decking, suffering a head injury that required hospitalization.",1
"An employee was using a bender, welder, and trimmer when it was activated via the foot pedal. Her right hand was caught in the fixture, amputating her middle, ring, and pinky fingers.",1
"While removing roof decking, an employee stepped on the end of a sheet of decking that was not supported. The decking tilted and the employee fell 10 feet to the concrete floor, fracturing three ribs.",1
"An employee was using a front-end loader bucket to push against a plow. The employee went under the plow to knock a bolt out with a 3-pound hammer. When the bolt broke free, the bucket dropped and struck the employee in the head.",1
"An employee was moving scrap casting material when it fell on top of the employee's right foot, causing an injury that required hospitalization and surgery.",1
"While descending a ladder in an elevator shaft to inspect the fire system, an employee slipped and fell approximately four feet, suffering a compound fracture to the right arm that needed surgery.",1
An employee suffered a right middle fingertip amputation while attempting to remove film from a packaging machine. The machine was not guarded at the time.,0
An employee was ripping wood on a gang saw when a piece of wood ejected from the machine and struck the employee in the chest. He suffered a punctured lung and laceration.,1
"An employee fell from a ladder to the ground while tightening a bolt on a ramp. The employee lost consciousness, suffered a possible concussion, and injured the left shoulder and arm.",1
An employee was replacing a gutter from a ladder when the ladder slipped. He then fell 15 feet to the ground and fractured his pelvis.,1
An employee was cleaning a glue roller machine when the employee's finger was caught in the rollers amputating the fingertip. The machine was running at the time.,0
"An employee was inspecting a guide box outside of the millhouse when he attempted to pull a 20-pound pin on the guide box. His left hand was then caught and crushed between the pin handle and the box, and his left index, middle, and ring fingers had to be surgically amputated above the first knuckle.",1
"An employee was hammering a packing gland when a pipe fell approximately 15 feet and struck the employee's left hand, causing severe lacerations.",1
An employee was removing the restraints from a mower in a trailer when he fell off the trailer and fractured his pelvis.,1
"An employee operating a walk-behind (walkie) was attempting to turn the equipment when he was caught between the walkie and a wall. The walkie rolled over his left ankle, causing a fracture that required surgery.",1
"An employee was installing a catwalk in the area where a new trimmer machine was getting ready to be installed when he fell 15 to 20 feet and landed on his head, suffering severe head injuries.",1
An employee was troubleshooting a pouring station when the cylinder activated and his right fingertip was caught between the plunger and the stop plate. The flesh on his right index fingertip was amputated (no bone loss). The pouring station was not locked/tagged out at the time of the incident.,0
"An employee was cleaning steam rolls and was pulled into the roll area, smashing a hand and amputating three fingertips.",1
An employee was walking upstairs when a stair gave way. The employee fell 24 feet to the ground and suffered a broken leg.,1
"An employee was adjusting a machine when his arm was caught and fractured in the machine, requiring hospitalization.",1
"An employee was attempting to repair the welding machine with a pair of pliers when the pliers became caught and pulled the employee's hand into the machine, partially amputating the left ring finger.",0
"An employee was escorting another employee off the premises. The injured employee thought the coworker was gone and was walking back to the production area when the coworker started hitting and kicking the employee, causing cuts, bruises, and fractures. The employee was hospitalized.",1
An employee began running to warm up when he fell and broke his left femur.,1
"An employee was moving an axle unit on an assembly line when he slipped and fell backwards. His right leg was caught and crushed between the rails, causing a contusion and excessive pressure buildup.",1
"An employee was greasing a skid steer in front of the lube bay. As he walked backwards to move away from the machine, he tripped on a wheel hub that was on the ground behind him, twisting his ankle and falling to the ground.",1
"An employee was attacked by another employee, suffering a concussion, nerve damage, and orbital socket damage. The employee was hospitalized.",1
"An employee was using a saw to cut metal recreational vehicle parts. He was changing from cutting one type of part to another when he saw some of the old material inside the guard of the machine. As he attempted to remove the material, the saw blade amputated his left ring finger.",0
"An employee fell from a work platform while servicing a ventilation fan drive motor, breaking bones and requiring hospitalization.",1
"An employee was at a gas extraction facility cleaning a knock-out vessel. As the employee was pumping down the knock-out vessel, a fire ball from the flare backed up through the 4-inch line that was connected to the knock-out vessel and burned the employee's left hand, torso, and back.",1
An employee was walking down a pathway when she lost her balance and fell down a flight of stairs. She hit her head on the sidewalk and suffered a head contusion.,1
"An employee was performing maintenance and clearing out a jam in the granulator when a section of the machine fell on and amputated his fingertip.
The machine was locked out at the time.",0
An employee suffered an amputation while using a band saw to cut meat.,1
"An employee was moving a beam with an overhead crane when the beam went off center. The employee then stepped backward and tripped, and the beam fell on his leg, which was injured and required surgery.",1
An employee was painting the ceiling while on a scaffold system that was about 10 feet from ground level when the employee fell from the scaffold and suffered a head injury.,1
"An employee was loading supplies into a truck and closing the tailgate when his right ring finger was caught in the tailgate, amputating his fingertip.",0
"An employee was walking alongside a forklift and providing traffic control when he tripped and fell, and the forklift ran over his foot.",1
"On April 7, 2017, at 1:30AM, an employee was opening the door to the dining area when she slipped on water and fell, breaking her right hip.",1
"An employee was on top of the redi-mix concrete truck washing down the hopper/drum. As he was descending the truck ladder, he fell to the ground and was hospitalized with fractured ribs.",1
"An employee was at a school function at a trampoline park. He was doing flips when he landed on his back, injuring his neck. He required surgery and hospitalization.",1
An employee was waterproofing culvert boxes. He was trying to cross a 4.5-foot gap between the boxes when he fell backward to the ground and broke his leg.,1
"An employee was walking into the restroom when the door struck her in the head. She suffered nausea, vomiting, headache, and dizziness.",1
An employee was waterproofing culvert boxes. He was attempting to cross a 4.5-foot gap between the boxes when he fell backwards to the ground and broke his leg.,1
"An employee was filling an ice cooler, slipped on ice that fell onto the floor and fell resulting in a back injury.",1
"An employee was climbing up the rungs of a ladder when he slipped. He was approximately three to four rungs up when he fell to the ground, injuring his tailbone and back requiring hospitalization.",1
"On April 8, 2017, at approximately 2:00 PM, an employee was attacked by a dog while delivering mail. The force of the dog drove the employee backward to the curb, where the employee fell to the street and fractured the right shoulder. The employee was hospitalized.",1
An employee was working inside the shop when a propane leak caused an explosion. The employee suffered third degree burns.,1
"An employee tripped over a rocking chair and fell down, fracturing her right hip.",1
The employee was troubleshooting a pump jack when an arc flash occurred burning both hands.,1
"On 4/8/17, an employee was cutting bacon with a bandsaw when he made contact with the blade, amputating his right index finger. The saw was guarded at the time.",0
"On April 8, 2017, an employee fell off the fourth rung of an A-frame ladder and suffered a broken left shoulder and left leg, as well as a right ankle injury, requiring hospitalization.",1
"An employee was removing drywall when he lost his balance and fell backward onto concrete, dislocating his right shoulder.",1
An employee was attempting to close the tail on an aircraft when the employee's right index finger was smashed and amputated in the mobile tail enclosure.,0
An employee was adding hash browns to the fryer when he fainted or had a seizure and fell into the vat of hot oil. The employee suffered burns to his left arm from his fingers to above the elbow.,1
An employee was installing concrete moldings when he fell from the third floor porch and fractured his right femur and right wrist. He was hospitalized.,1
"On April 8, 2017, an employee was cutting a 10-inch water pipe using a pipe saw when the saw blade kicked back and lacerated his face. He was hospitalized and had surgery.",1
An employee was taking part in an exercise program when he suffered vision loss.,1
An employee's arm was caught and fractured in a press brake.,1
"An employee was cleaning a skinner machine when part of the machine fell off and landed on his right index finger, partially amputating it.",1
"An employee was repairing a feed line auger that had tension in the system. The employee thought he had the energy released, but it was spring loaded. When the energy released, it pinched his finger against the cage. His finger was surgically amputated.",0
An employee suffered a right index fingertip amputation while using a meat saw to cut meat.,0
"An employee was setting a piece of metal floor decking on the 2nd floor when he stepped back and fell through an undecked portion of the floor. He fell down onto the 1st floor concrete flooring, fracturing his right wrist and skull.",1
"On April 9, 2017, an employee was removing felt from the collection pit of a paper machine when the employee slipped on water and fell, suffering a torn labrum.",1
"An employee was trying to de-energize the medium voltage temporary switchgear. He was pulling down on the knife switch, which was spring loaded, and thought the switch completed the action to the ""open"" or off position when the knife switch sprung back up, striking him on the right side of the face. He was hospitalized with a laceration to the corner of the mouth, a fractured eye socket, and a damaged tear duct.",1
An employee was offloading a heavy pallet from a plane when his right middle finger was pinned against the pallet and the dolly lock. His finger broke and required hospitalization.,1
"An employee was operating a cut-off bar saw when a counterweight that keeps the saw elevated broke, causing the saw blade to come down on and partially amputate his left thumb and left index and middle fingers.",0
"An employee was exiting her cashier booth when a car hit her on the left side of her body, lacerating her left leg.",1
An employee responded to the ER reception area and had a verbal and physical altercation with a visitor. The employee was hospitalized with an acute myocardial infarction.,1
"An employee was using the right hand to push meat across a meat slicer when the employee's vinyl glove was caught by the slicer blade, pulling the employee's right thumb into the blade. The employee's right thumb tip was amputated along with part of the thumbnail.",0
"An employee was filling a quadrant ladle with molten iron from a holding ladle. The trough was not in the upright position because the machine was in between cycles. The quadrant ladle then overfilled, causing some of the molten iron to spill out and onto the employee's feet, burning them.",1
"On April 10, 2017, an employee was cleaning equipment when it partially amputated the employee's left middle and ring fingers. The equipment was not locked out at the time.",0
"An employee was operating band saw when he sneezed several times and his hand went into the blade, amputating his left thumb.",0
An employee installing a hose to an HVAC system and was hospitalized for lacerations to three fingers on his right hand after being struck by the fan blades when the equipment turned on.,1
An employee tripped after stepping into an uncovered floor drain with his left foot resulting in a swollen foot.,1
"A steel beam fell on an employee's leg, resulting in amputation of the left foot.",0
An employee was cleaning a machine when his left hand was caught in the machine's rollers resulting in a skin avulsion and hospitalization.,1
"On April 10, 2017, an employee was working on a door jam in an aerial lift beneath another aerial lift where a coworker was welding an angle iron. The angle iron tack welds were broken, causing the angle iron to swing downward and strike the employee in the upper back area. The employee suffered upper back and neck injuries and fractured vertebrae.",1
An employee was unclogging a trash chute at a construction site when something hit the top of his right foot resulting in fractured tarsals.,1
"An employee was operating a lathe to polish a small steel bar when his glove was caught in a rotating shaft, pulling his right hand into the lathe and amputating his right ring finger.",1
An employee was burned by hot grease while removing a pan from an oven.,1
An employee was cleaning up a worksite when a storm-damaged limb became dislodged from the tree canopy and fell on the employee. The employee was hospitalized for two broken ribs and five fractured vertebrae.,1
"On April 10, 2017, approximately 2:00 p.m. an employee was cleaning the belt of a live bottom asphalt trailer when her cleaning device and glove were caught in the belt pulling her in and injuring her right hand and forearm requiring surgery and hospitalization.",1
An employee was moving furniture in the office and bumped their upper right thigh resulting in a blood clot in the thigh. The employee was hospitalized.,1
An employee was pushing two rigging cables through the whip line head block to untangle them and amputated a finger.,1
"While attempting to remove an obstruction from a valve that was located inside of a rail car, the valve closed and amputated an employee's left ring finger.",0
"An employee was leaning on the railing located on the swim platform of a yacht when the railing gave way and the employee fell fracturing ribs, vertebrae and bruising their liver.",1
"On April 10, 2017, a temporary employee was using a nail gun and shot a nail into his right knee resulting in hospitalization to surgically remove the nail.",1
"On April 10, 2017, an employee was manipulating a steel sheet onto a line from a container when the sheet slipped out of his hand and cut his right bicep.",1
An employee was performing pest control services at a customer's house and was bitten on the right hand by the owner's dog.,1
An employee was removing cut lumber from a conveyor chain when their right pinky finger was caught between the sprocket and chain resulting in a partial amputation and hospitalization.,1
"An employee was doing framing work while standing on a plank of wood when he fell approximately 10 feet to the ground, injuring his body and back.",1
An employee was cutting meat on a meat saw and amputated the middle fingertip without bone loss.,0
"An employee was clearing the hydrolyzer when backpressure caused hot feathers to discharge onto the employee. As the employee moved out of the way, he fell six feet breaking a bone over his left eye and suffering first and second degree burns to the hands, arms, face and neck.",1
"An employee was responding to a code, touched something on a patient's bed and went into anaphylactic shock which triggered a cardiac event.",1
"While removing aluminum flash from the die of a hydraulic trim press, an employee amputated his middle finger when the press malfunctioned.",0
An employee walked under a manlift and the manlift struck the employee on the head resulting in a head and back injury.,1
"An employee was checking the ID of a pipe for smoothness. While she was checking the inside of the pipe with her thumb, the machine cycled pushing the pipe back against a back stop and trapping her thumb between the back stop and the wall of the pipe. The tip of her thumb was amputated.",0
"An employee was exiting the cab of his parked truck, missed the second step and fell to the concrete floor breaking his kneecap.",1
"An employee was filing papers, tripped over a wrinkle in the runner rug, and fell fracturing her arm in four places.",1
"An employee was moving a truck and trailer when the trailer jack-knifed. A second employee was assisting the first employee with the trailer. The injured employee was standing next to the trailer directing the truck driver, when the trailer rolled over on top of him resulting in broken legs.",1
An employee was standing on a six foot ladder applying plastic covering on overhead cables and fell injuring the right side of the body.,1
"An employee was setting up a hydraulic pull tester station (5000 lbs. capacity). A plastic chain product was put under tension. While the employee was adjusting some locking washers with a spanner wrench, the plastic chain snapped and the employee's left middle fingertip was caught and amputated between the washer and a table.",0
"An employee was lifting a transmission onto a stand when he lost his grip and the transmission fell on his leg, fracturing his tibia.",1
An employee was operating a forklift to lift a hopper/bin filled with approximately 950 lbs. of scrap metal. The employee's left hand fingers were caught between the forks and the bin while trying to release the waste into a dumpster resulting in the amputation of two fingertips.,1
An employee was assisting in a saw re-build. The employee tried to grab a ball screw as it was falling and his finger was crushed/pinched between the falling part and the machinery housing.,0
An employee was threading stock into the core machine and suffered a partial amputation of the right ring finger.,0
"An employee was refilling a forklift cylinder when the fueling nozzle began leaking propane. As the employee went to turn off the nozzle, the propane ignited and the employee sustained burns to his neck, arms, face, and head.",1
"On April 10, 2017, at approximately 11:15 a.m., an employee was performing maintenance on a rooftop HVAC unit when he fell 19 feet through a skylight to the ground. A personal fall arrest system was not worn at the time of the incident. The employee was hospitalized with severe internal injuries such as a lacerated liver, punctured lung and head trauma.",1
"An employee was lifting a piece onto an auto-loader when a piece of metal swirled around and squeezed his right hand between the piece and the auto-loader, severely lacerating it.",1
An employee was setting up to do some roof work when the ladder he was on gave way causing the employee to fall to the ground and fractured the left heel and right tibia.,1
An employee was struck in the stomach by a patient while trying to get the patient to sign paperwork. The employee was hospitalized with an abdominal contusion.,1
An employee fell 11 feet from the hull of a vessel under construction to the floor below and was hospitalized for a fractured arm.,1
"An employee was paving a road when a passenger vehicle broke through the barriers at the construction zone and struck the employee, who was hospitalized with a head injury.",1
"An employee was turning on an electrical box agitator near a high-speed mixing tank when hot liquid hair conditioner, at > 212 degrees F, came out of the tank and caused second degree burns on the employee's upper torso, head, and face.",1
An employee was walking from one building to another when she tripped and fractured her left arm. She was hospitalized and had surgery.,1
An employee was moving cables when he felt a pain in his abdomen due to a hernia.,1
An employee tripped over a dumbbell and fell on her knee dislocating the knee cap and tearing ligaments in the knee.,1
"An employee was struck by the raised fork of a forklift, losing an eye.",0
An employee came in contact with the chain and sprocket of running equipment resulting in amputation of the left middle and index fingers between the first and second joint.,1
"On April 11, 2017, an employee was cutting wire with a hand-held cable cutter and suffered a partial amputation of the right thumb.",1
An employee was struck by a vehicle resulting in amputation of his right leg.,0
"An employee was disassembling an 75-ton conventional truck crane. The employee was watching the cables as they moved through the sheaves. The employee removed a pin out of the boom and the boom dropped, pinning the employee to the ground. The employee's knees and ankles were crushed.",1
An employee was removing tools from a storage shelf when several saw blades fell from a shelf above and struck the employee's head. The employee fell striking his head on the ground. The employee was hospitalized for a concussion.,1
An employee was cutting plywood with a planer and lacerated three fingers on the right hand and amputated a fingertip. The planer was unguarded at the time.,0
An employee was working on a roof installation and suffered a heart attack.,1
"An employee was pulling freight at the customer location with his pallet jack when he began to feel intense pain in his lower back, which caused the employee to briefly lose consciousness. The employee was hospitalized.",1
An employee was cleaning the hydrovac tank when a valve failed and struck him in the face. The employee suffered injuries to his face and jaw requiring hospitalization.,1
An employee fell off a scaffold breaking his leg and pelvis.,1
An employee was using a table saw to build a podium for the training room when the blade lacerated his left thumb. He was admitted to the hospital.,1
An employee pinched her right thumb while closing a floor safe.,1
An employee was unloading equipment (sod cutter) using a boom when the employee was struck by the equipment resulting in a fractured left leg and ankle.,1
An employee was in a lift gate trailer when his right foot got stuck between the trailer and the dock. He fell and hit his head resulting in hospitalization.,1
"An employee was walking into the building on a rainy day, slipped on the tile floor and fell fracturing the right kneecap.",1
The employee was changing a spring on a motor former on the production line when hot product from the line splashed into the employee's face resulting in burns.,1
"An employee was walking through the parking lot while carrying a box, slipped on ice, and fell breaking the right leg.",1
An employee was struck by a forklift as it was backing up in the recycle center resulting in a broken leg.,1
An employee was checking bin fill levels on a bin platform. The railing had not sprung back into place and he fell about eight feet from the platform to the receiving floor. He was hospitalized.,1
An employee arriving to work slipped on a wet floor and fell fracturing the left tibia and ankle.,1
An employee was attacked by a patient. The employee received injuries to the face and suffered a heart attack. The employee was admitted to a hospital.,1
An employee was pulling wire through the conduit from a 14 ft. step-ladder when he fell to the concrete surface below resulting in serious injury requiring hospitalization.,1
An employee was riding a horse to move cattle and was thrown from the horse. The employee sustained fractured ribs on the right side and a fractured left pelvis.,1
An employee was using compressed air to clean coolant from the bottom of a part that was suspended by a magnet. The part fell from the magnet and the employee's index finger was struck by either the air hose or the falling part resulting in a partial amputation.,0
An employee tripped over a plastic binding strap and fell breaking his knee.,1
"An employee was inspecting the fireproofing from a 10 foot ladder. He began descending the ladder, missed a rung, and fell approximately six to seven feet landing on his left side and bumping his head. The employee was hospitalized with four broken ribs.",1
"An employee was walking down stairs, tripped and fell resulting in a broken ankle.",1
An employee was walking in the hallway and tripped on her pants or her shoe laces and fell on her knees. She was hospitalized for hip replacement surgery.,1
"On April 11, 2017, an employee suffered fractures to his pelvis, knee and tailbone after a loaded metal racking unit overturned onto the employee as the employee was removing it from the burn off oven.",1
An employee's truck was stuck in the sand. The employee placed a board under the tire in order to gain traction and caught his index finger between the tire and board resulting in a partial amputation.,1
An employee fell from a ladder and fractured an arm and a leg.,1
The employee was operating a zero radius mower on a steep incline. The mower rolled over and the employee suffered a compound fracture to a leg requiring surgery and bruising of the spine.,1
An employee was cutting T-bone steaks on a vertical band saw and amputated his left middle fingertip.,0
An employee fell while climbing down a 16 foot aluminum extension ladder resulting in a broken left wrist/arm and bruised ribs on the right side.,1
An employee was operating a wire mesh making machine when his glove was caught in the rotating bar resulting n a broken arm. The machine was guarded at the time.,1
An employee was leaving work and fractured her ankle and injured her wrist after jumping from the loading dock.,1
An employee slipped on a wet surface and fell hitting their head on a wall.,1
An employee was troubleshooting a CT machine and received third degree burns to his right hand when it contacted an energized slip ring.,1
An employee was hospitalized after his fingers were crushed when a slab was lowered onto them.,1
"On April 12, 2017, an employee was nailing plywood to a truss with a nail gun, when the nail gun double jumped and a nail went through his right foot.",1
"On April 12, 2017, at 2:20PM, an employee was setting a shim on a press. When the press cycled, the employee's fingers were caught in the clamp used to secure the product resulting in a partial amputation of the left index and middle fingers.",0
An employee was installing a band saw V-belt and amputated the right index fingertip in the belt and pulley. The machine was not locked out/tagged out at the time.,0
An employee was connecting a chain to a stunned steer and pinched their left index finger resulting in a fingertip amputation.,1
"An employee was releasing water from the hopper that was in operation. As he was releasing connections, he braced himself with his hand on an opening. His hand slipped and contacted the hopper lift resulting in amputation of the index, middle, and ring fingers up to the middle knuckles on his left hand.",0
An employee was unloading a truck trailer when their foot was caught on a load retainer and the employee fell. The employee's right foot was fractured in two places.,1
An employee's left foot and ankle were burned while cleaning out the ladle when the ladle tipped forward and the molten iron when into the employee's boot.,1
"An employee was standing on a ladder trimming a tree branch on the building grounds. The tree branch snapped off and struck the employee in the face, knocking him off the ladder. The employee was hospitalized for injuries to the face, wrist and pelvis.",1
"An employee was wiring a terminal block inside a breaker control cabinet. The employee repositioned himself inside the cabinet and struck his head on a bolt. After striking his head, the employee fell over and was shocked by a 240 volt AC knife switch resulting in a burn to the back of the neck, a head laceration and an electrical burn to the right thumb and index finger. The employee also sustained right arm numbness.",1
"While walking from the west side of the building to the east side, an employee tripped over a stack of service bumpers that measured 18 inches and fell fracturing the right hip and requiring surgery.",1
"An employee was working from a ladder approximately 11 feet above ground, lining pre-cast concrete panels and performing final welding of the panels. The employee fell from the ladder while attempting to align the panels. The employee was hospitalized for a traumatic brain injury.",1
"An employee was working off a scaffold side bracket patching a concrete wall structure in an elevator shaft. While working off the outrigger platform, the platform failed causing the employee to fall about 30 feet to the ground. The employee suffered three fractured ribs, a punctured lung, and a dislocated right elbow.",1
An employee was cleaning grease from a sprocket with a rag when the rag got caught in the sprocket and pulled the employee's fingers into the sprocket and chain. The employee's right index and middle fingers were partially amputated.,0
An employee was operating a bending machine and crushed their right thumb in the machine resulting in amputation at the first knuckle.,0
An employee was tightening the tension on a garage door spring when the winding bar slipped off the cone causing the spring to unwind. The employee was hospitalized for a laceration and fractures to his left thumb.,1
An employee was transporting a container of liquid nitrogen on a dolly. Upon entering a building the container fell off the dolly and pinched the employee's finger between it and the dolly resulting in a left index finger amputation at the tip of the distal interphalangeal joint.,0
"An employee was unloading a truck and fell through a 13"" gap in the dock plate resulting in broken ribs, a punctured lung and a shoulder injury.",1
An employee was mixing mortar with a battery powered drill. The employee's glove was caught in the drill chuck pulling his hand into the drill resulting in amputation of the thumb.,0
An employee was troubleshooting flow issues in a tank when he was splashed with the hot fluid chemical solution in the tank causing caustic burns to his legs and abdomen resulting in hospitalization.,1
An employee was operating a hi-lift forklift and was pinned against a racking system causing a chest injury and a possible punctured lung.,1
"An employee was transporting a patient on a stretcher out of a room. In the process, the door handle trapped her pinky finger between the door handle and the stretcher resulting in a fingertip amputation.",0
"An employee was on a utility trailer hooking chains from a loader onto a big air conditioning unit that was brought for scrapping. After hooking the chains, the employee slipped on top of the unit and fell to the trailer floor, landing on his left foot and breaking his lower left leg. He was hospitalized for surgery.",1
"An employee was cleaning the walk-in shower in a guest home, tripped over the shower door sill and fell fracturing the right humerus.",1
An employee was climbing a ladder to get to the roof when the base of the ladder slipped out and the employee fell approximately six feet to the concrete sidewalk resulting in a fractured ankle.,1
"An employee was struck by a pickup truck during a flagging operation on a road construction project, suffering broken ribs and left leg, spinal, and liver injuries.",1
"An employee was repairing the hydraulics on a track loader and was checking for hydraulic leaks. The cab was removed from the machine for the repairs, but the hydraulic controls (joystick) were still mounted to the superstructure of the machine, which was sitting on jack stands. As the blade pushed down and raised the machine up off the jack stands, the jack stands kicked out. The employee climbed onto the equipment's mounted steps to reach for the joystick to stop the movement and was knocked into an open compartment door, striking his lower chest and abdomen.",1
"On April 13, 2017, at 2:30 p.m. an employee missed the last rung of the A-frame ladder that he was descending and fell on his right kneecap, shattering it. The employee was hospitalized for surgery to stabilize his knee.",1
"An employee was unloading merchandise in the receiving department and was carrying it to a nearby area when she tripped on the corner of a clothing rolling rack. She fell on her right side and fractured her right hip, requiring hospitalization.",1
"On April 13, 2017, an employee was operating a skid steer when the attachment came up and struck him above the right eye. The employee was hospitalized.",1
"An employee was dismantling a scaffold and stripping its platform when the employee fell approximately 8 feet from the platform to the concrete below. The employee fractured four ribs and four vertebrae, requiring hospitalization.",1
"An employee fell down the stairs and suffered a facial laceration, requiring hospitalization.",1
An employee was ripping plywood on a horizontal panel saw when the top panel had a piece break off and a piece of plywood was kicked back into the employee's abdomen. The employee was hospitalized for torn intestines that required surgery.,1
"An employee was helping a forklift operator load material onto his truck when his left hand was crushed between the trailer and mast of the forklift, fracturing and lacerating his index and middle fingers.",1
An employee was using a knife to cut food when the blade amputated his fingertip.,0
"An employee was walking around the waste hampers to size up the load for a forklift, tripped over metal equipment on the floor, and fell breaking bones in his leg.",1
An employee fell from a roof and broke his hip.,1
"An employee was weighing 55-gallon drums that were on a pallet next to a scale. When he tried to rotate a drum off the pallet and onto the scale, his right thumb was pinched between two drums, amputating the thumb tip.",0
"An employee was cutting a palm tree, moved quickly and fractured his left ankle.",1
"An employee was climbing a tree to prune it when the tree failed about 5 feet below his tie-in point and he fell 20 feet to the ground, suffering a fracture that required hospitalization.",1
"On April 13, 2017, an employee fell from a ladder while insulating a residential home resulting in a head injury and hospitalization.",1
An employee was driving an ambulance when a coworker used a disinfecting product in the vehicle. The employee had an asthma attack and required hospitalization.,1
An employee was taking care of a patient and fell down the stairs breaking the right hip.,1
"On April 13, 2017, an employee was injured when he fell approximately 10 feet from the top outside step/platform of a boom truck while tightening a rope around the bucket.",1
"On April 13, 2017, an employee suffered a fracture of his right femur after he was struck by a displaced railroad rail while performing cutting operations. The rail was hoisted via backhoe grapple while being cut by the injured employee. As the employee was making the cut the rail fractured, striking the employee in the leg.",1
"An employee was working on a mezzanine, assembling boundaries for volleyball courts. While picking up anchors, the employee fell approximately 9 feet to the loading area below, injuring both ankles and one heel. The employee was hospitalized.",1
"An employee pulled a 40-foot long spool (pipe hardware) from near the bottom of a skid using a rope that was tied between the crane outrigger (rear passenger side) and the pipe spool. As the outrigger was retracting, the employee's left hand and arm were caught between the outrigger base and the crane outrigger causing a crushing injury to the employee's left hand/wrist that resulted in surgical amputation.",1
"An employee was cutting a roll of flooring protection with a handheld circular saw when their left hand middle, ring and pinky fingers contacted the rotating blade. The ring finger was amputated.",1
An employee was cutting drywall with a table saw and contacted the saw blade resulting in amputation of the left middle finger between the first and second joint and a laceration to the left index finger that required medical amputation.,0
"An employee had just delivered mail and was walking down the driveway when a dog jumped on him and knocked him to the ground. He lost consciousness and suffered a fractured skull and brain hemorrhage, requiring hospitalization.",1
"An employee was walking down a stream bed to access the riverbank and test the water flow when he slipped and fell, hitting his right knee on the bedrock bank and breaking his kneecap.",1
An employee was operating a brake press to form small metal parts and pinched his left middle finger between the material and the front of the ram amputating the middle fingertip.,1
"On April 13, 2017, an employee was attempting to ""block off"" a cylindrical boiler and caught their right index finger between the boiler and the dunnage resulting in a fingertip amputation.",0
An employee was walking behind the front counter when she tripped over a phone cord and fell into the counter striking her ribs on the counter. The employee was hospitalized for a rib fracture and collapsed lung.,1
An employee was performing maintenance on the cutter machine and partially amputated their left middle and ring fingers.,0
An employee was scrapping off polyurethane from rollers on a machine using a sharp tool. The employee was scraping towards himself and the tool slipped off the rollers and punctured the employee's right inner thigh. The employee was admitted to the hospital.,1
An employee was operating a powered industrial truck. When the employee raised the boom it lifted a bridge walkway between two aisles causing it to fall onto the employee. The employee suffered a laceration to the neck that required surgery.,1
"An employee was grinding imitation crab in a meat tenderizer when her fingers were caught in the equipment rollers, crushing them and requiring hospitalization.",1
"While performing re-roofing activities, an employee fell 7.5 feet off the roof to the surface below, fracturing two ribs.",1
"Two employees using a six foot rolling scaffold on top of nailed down plywood were pouring concrete from a pump truck. Once they finished the area, another employee on the ground pushed the scaffold to the new area. The wheel caught a nail, the scaffold tipped over, and both employees fell to the ground. One employee was hospitalized for muscle strain and contusions.",1
"An employee was responding to a car crash. The employee was walking down into a ravine to render aid to a crash victim when she crossed a creek. Her foot sunk into the mud, stopping the forward motion of her foot while her body continued to travel forward. Her foot broke and required surgery.",1
"An employee experienced an allergic reaction while mixing an oral contrast medium, suffering respiratory distress and hives.",1
"An employee stepped onto a shelf to reach a box when the shelf collapsed. The employee fell backward and the boxes fell on him, striking his forehead. He suffered a concussion.",1
"An employee was power-washing the rig. He shut it off to address an issue with some equipment and returned to relieve the pressure in the washer. He had his hand out when residual pressure in the washer line caused the water to release and cut through his glove and into his right hand, requiring hospitalization.",1
"While delivering mail, an employee tripped and fell on the lip of a raised sidewalk, fracturing a hip.",1
"An employee was loading and unloading 3"" pipe from a trailer to the ground when a pipe rolled and pinched his finger. His finger was amputated.",0
An employee outside an aircraft was helping a coworker inside the aircraft close the door when his right index fingertip was caught and amputated by the closing door.,1
An employee was in the parking lot assisting a customer when he tripped over a trash can and fell striking his head on a concrete curb. He was hospitalized overnight with a possible concussion.,1
"On 4/14/2017, an employee fell from the dump body bed of a utility vehicle, suffering a contusion and/or possible head fracture.",1
"An employee was trimming snouts with a powered knife as they came down a conveyor. During a lull in product coming down the conveyor, the employee shut off the knife and made a few adjustments to tighten the blade. When the employee turned the knife back on, it oscillated in the employee's hand in a manner that caused the employee to lose control of the knife. The knife then hit the employee's face, causing a deep laceration to the left side of the cheek and mouth area.",1
"While carrying a tire, an employee tripped on a lift bracket that was left on the floor, falling to the ground and breaking a hip. The employee was hospitalized.",1
"An employee was operating a machinery line to make PVC pipes when a pipe became stuck or misaligned. The employee was attempting to fix the problem when his right middle and ring fingers were smashed between two pipes, amputating the fingers to the first joint.",0
An employee was stepping across a threshold into a train when he twisted his left ankle and fell outside the train. His left ankle broke.,1
"An employee was adjusting a dock plate with a trailer when the dock plate became stuck. When the employee attempted to unjam the dock plate, the employee's right pinky finger was caught between the dock plate and the trailer, amputating the fingertip.",0
"An employee was holding a clamp while a coworker swung a hammer. The coworker struck the employee's finger with the hammer, requiring hospitalization.",1
An employee was chasing a patient leaving the emergency room when he tripped on the curb outside and tore his knee tendons.  He was hospitalized.,1
"An employee was tightening straps to secure drill rods to the rack on the side of a drill rig. The drill rig operator was unaware that the employee's hand was on the drill rod rack and moved the drill rig, catching the employee's hand between the rig and rack. He suffered a dislocated wrist and damaged ligaments, requiring surgery.",1
"On Friday, 04/14/17, at 08:15AM, an employee was disassembling a lattice boom crawler crane and removing a 10-foot section. After the pins were removed from the boom, the boom did not immediately break loose. The employee was then descending from the top of the boom when the section separated from the rest of the crane, causing him to fall 9.5 feet to the ground. He sustained a fractured cheek bone, multiple skull fractures, and a fractured shoulder.",1
"An employee entered a corn silo to free up a jammed grain sweep when the corn he was standing on gave way, causing him to fall and strike the weights of the machine. He was hospitalized for possible fractured ribs and head trauma.",1
"An employee was unloading large trees from the top of an 18-wheeler when the strap came loose from the backhoe digging arm. The arm then swung and hit him in the left upper body, causing him to fall 4 feet to the ground. He suffered broken ribs, a collapsed lung, a broken collarbone, and a head abrasion.",1
"An employee was getting ready to pour a concrete footing when the outrigger became unstable, causing the pump jib to move and strike the employee's left leg. The employee suffered a compound fracture below the knee and above the ankle, requiring surgery.",1
An employee was operating a forklift and was attempting to retrieve a trash bin from the compactor when the forklift overturned. The employee's arm was broken.,1
"An employee was removing debris from a machine while waiting on the machine's cooling process to be completed. Due to a software error, the interlock system failed, allowing the machine's die to move and contact the employee's right thumb, which suffered an open fracture. The thump tip had to be medically amputated.",0
An employee was securing the back of a compactor with a bungee cord when the bungee cord struck and injured the employee's left eye.,1
"An employee was ascending an indoor ladder into an attic space to replace air filters. While on top of the ladder, the employee lost stability and fell off, landing on a metal mailbox case and then the floor. The employee suffered severe pain in the lower back and right leg.",1
"An employee was helping a die cast operator eject a jammed part when the part released under pressure and struck the employee's hand, crushing the thumb.",1
"An employee was pulling empty packages from a flow wrapper machine. Her right hand was beneath the machine when it was struck by the wheel, breaking her middle finger.",1
An employee was using a 25-pound wrench to tighten disc gang nuts when his hand slipped off the wrench and his right ring fingertip was crushed and dislocated.,1
"On April 15, 2017, at about 2:30 a.m., an employee was cleaning a primer day tank when the agitator in the tank started to move. The hose the employee was using to clean the tank wrapped around the agitator, causing her right arm to be caught in the moving agitator. She suffered a fractured right arm and right pinky.",1
An employee was sanitizing equipment on a filling line. The drain valve was opened while his finger was in one of the filler holes. The filler then cycled and amputated his left middle fingertip above the top knuckle.,0
"An employee fell through a stair opening at a home construction site and was hospitalized for injuries to the head, ribs and hip.",1
"An employee tripped and fell onto a hot piece of coke near a 1-3 battery, suffering burns to his hand.",1
"An employee slipped while applying liquid floor stripper, fracturing his right hip.",1
"An employee was connecting two baggage transporters when the hinge of one dropped, pinching and amputating the employee's left middle finger.",0
"While exiting a truck in the wash bay, an employee tripped and fell on a wire installed inside the truck, breaking a leg in two places and requiring surgery and  hospitalization.",1
"An employee was cleaning a charging pad for robotic machines, which was in a confined space. As the employee was exiting the charging pad, he placed his right arm and hand outside the charging pad area to push off. Another machine then crushed his right hand and lacerated his arm.",1
An employee was pushed to the ground and struck their head on the ground.,1
"An employee was performing demolition work. He opened a large heat treating oven door. When he opened the door, a piece of metal fell from atop the door and struck the employee's left arm causing a laceration to the arm.",1
"An employee was using a portable angle grinder and a sanding disc to remove weld spatter from a 3-11 shell weighing approximately 11,900 pounds. The employee was checking the alignment of the shell with its flange when their gloved, left hand was caught between the shell and the poly wheel of the roller upon which the shell was sitting/rotating. The employee's left thumb, ring and pinky fingers suffered lacerations that required sutures. His index and middle fingertips were fractured requiring pins.",1
An employee was starting up the injection molding machine and was caught between moving parts resulting in a fractured right arm.,1
"While operating a drilling machine, an employee was struck by the machine, suffering a broken left knee and pelvis.",1
"An employee fell approximately 12 ft. from a scissor lift while doing electrical work. The employee suffered multiple fractures including vertebrae, foot, wrist and hip.",1
An employee was cutting wood stakes out of 2x4s with a hand saw and lacerated a finger on the left hand.,1
An employee was working from a ladder and fell crushing the left index finger.,1
The injured employee was pressing down a rail car pusher arm with a crow bar when another employee moved the rail car forward and crushed the injured employee's left index finger resulting in a partial amputation between the distal and middle joints.,0
"An employee was working on the green stacker laying sticks. As the last course of lumber was coming towards the employee, a paper ticket blew off. The employee pulled the e-stop and picked up the ticket and handed it to another employee (the injured employee) who contacted the machine amputating the right ring finger.",0
An employee fell approximately four feet from the conveyor chain and fractured ribs.,1
A worker sweeping with a broom on a loading dock fell 4.5 ft. off the loading dock and hit his head on the concrete driveway below.,1
"The employee had just returned from picking up a semi-trailer of scrap metal from a third-party and was opening the doors to the semi-trailer before backing into the loading dock. When the employee opened the door on the driver's side, scrap metal fell from the trailer onto the employee resulting in a broken hip and leg and internal injuries requiring surgery.",1
"An employee was descending a ladder at a customer location, lost his grip on the ladder and fell about five feet.",1
"On April 17, 2017, at approximately 3:30 p.m., an employee received an eye injury when he was struck by a nail from a second employee's nail gun.",1
"An employee was changing a semi tire. While the employee was trying to mount the tire to the axle, the jack fell and severed the tip of the employee's pinky finger between the bottom rail and the tire.",0
An employee's arm was caught between an air hose reel and a gear box while moving the spillway crane resulting in a severe laceration to his arm.,1
An employee was ascending a ladder affixed to a paint booth to service the spray paint booth when he fell from the ladder to the concrete floor fracturing their left tibia. The employee was hospitalized.,1
An employee was operating a chop saw and suffered a fingertip amputation.,0
An employee suffered an acute asthmatic episode due to smells of smoke within the building.,1
An employee was hanging sheet rock from a six foot A-frame ladder. The employee fell and fractured his right wrist.,1
An employee was operating the punch press machine and amputated his left index finger.,1
"While draining the product from a propane gas vaporizer, the igniter for the pilot light ignited the product causing a flash fire. An employee received second and third degree burns to the legs and arms.",1
"An employee was clearing grass from the discharge chute of a lawnmower and amputated his right thumb, index and middle fingers.",1
"An employee was installing HVAC ducts, fainted and fell approximately 10 feet injuring his head and back.",1
"On April 17, 2017, an employee was using a stand-up tugger to move a cart to a staging area when his right index finger was caught between the light pole on the tugger and a frame that was on the cart that he was moving resulting in the amputation of the right index fingertip.",0
"An employee was attempting to roll by hand a steel coil weighing approximately 600 pounds and measuring approximately 48 inches tall and 3 inches wide. The coil was upright and when the employee attempted to roll it, it tipped forward and fell to the ground and the employee fell with it. The employee sustained a partial fingertip amputation to the first three fingers on her right hand.",1
An employee was found unresponsive next to a front end loader. The employee was hospitalized for a head contusion.,1
An employee was hospitalized for burns to his body from the chest up from an arc blast.,1
"An employee was masking the aircraft windshield while standing on a portable work stand. The work stand rolled, causing the employee to fall approximately 50 inches to the ground. The employee was hospitalized for a fractured fibula and a fracture of the L2 vertebra.",1
"The injured employee was at a customer location to pick up lumber. The injured employee closed the back trailer door. As he shut the door, an employee of the customer location backed a forklift into him and pinned him between the truck and the forklift. The injured employee suffered broken vertebrae, three broken ribs, and an injured spleen. The employee was hospitalized.",1
An employee was assaulted by a patient resulting in a broken nose.,1
"An employee slipped on a wet floor, fell and broke her left knee.",1
"An employee had climbed an A-frame ladder to install a window unit. As the employee was holding the window unit, a gust of wind blew and the employee lost his grip on it. The window unit fell out of the opening and onto the injured employee's right leg resulting in a double fracture to the lower leg and lacerations.",1
An employee was cleaning the quill puller (defeathering machine) with water and amputated the right pinky finger. The machine was not locked out at the time.,0
An employee was manually pulling orders and loading 50 inch TV's (in box) onto a pallet when he suffered an apparent heart attack and then fell to the concrete floor where he also sustained a skull fracture and brain bleed.,1
"The employee was repairing pallets. After repairs are made, the pallet goes to a conveyor belt/line. The pallet got stuck. As the employee tried to un-jam it, his glove was caught on the chain and his left middle finger was amputated in the moving sprocket chain.",1
"An employee was emptying debris using a dump box on a forklift at a construction site. The employee released the latch on the dump box in order to tip it into the dumpster. At the time, the employee slipped and when he tried to catch himself his left hand got caught between the fork and the dump box pinching his middle and ring fingers resulting in a crushing injury to the ring finger and a middle fingertip amputation.",0
A temporary employee's leg was caught in a gap between two rollers on the conveyor belt and fractured.,1
"An employee had finished delivery to a customer. As he was closing the lift gate, his left hand was caught between the handle and step of the unit resulting in a finger amputation.",1
"On April 17, 2017, an employee was hoisting material via crane and suffered a distal finger amputation after it was caught between the crane hook and hoist attachment.",0
"An employee was removing 6x6 cribbing on top of a 4"" pipe when the pipe fell off and struck the employee's left ankle fracturing it.",1
An employee was attempting to remove an RTD (thermometer) from a hot oil pipe to replace it and was splashed with hot oil on his face and arms resulting in first and second degree burns. The machine was not locked out/tagged out at the time.,1
An employee was helping to clean the topping bars of a carrot harvester when his hand was caught in the topping bars. The employee received a severe laceration to his right hand resulting in hospitalization.,1
"An employee, who was observing a boring operation taking place inside a turbine shell, was sitting on planks (located on the horizontal joints of the turbine) and repositioning in order to stand inside the turbine where it would not be slippery when the boring bar caught and crushed the employee's right thumb.",1
An employee was operating a forklift and struck a guard rail after hitting a pothole. His left hand was caught between the forklift and the guard rail resulting in the partial amputation of the ring and middle fingers.,1
"An employee was walking along the catwalk of the log fume ride, kneeled to pick up something, lost balance and fell. The employee sustained multiple rib fractures and a pulmonary contusion.",1
An employee was operating the finger joint machine and amputated the tip of his left middle finger above the first knuckle.,1
"On April 18, 2017, an employee was attempting to remove finished product from a magnetic wheel at the end of the conveyor when the employee's glove was caught in an unguarded moving chain and sprocket resulting in a thumb tip amputation.",0
"During the tap/pour process, an arc flash explosion occurred and an employee that was standing approximately 30 feet from the operation received multiple burns to the face and chest from the molten metal and solids. The employee also sustained lacerations to the thigh and forehead.",1
"An employee was operating a reach truck to put product away. When the employee swerved to avoid boxes that were in the aisle, his left foot was caught between the racking and the reach truck resulting in a laceration.",1
An employee slipped on the wet floor of the wash bay and fell resulting in a back injury.,1
An employee was operating a stand-on pallet jack. The pallet jack jerked and his left foot was caught between the jack and a wall resulting in a compound fracture of the left ankle.,1
An employee slipped on the wet floor and fell hitting her head on the floor.,1
The employee was working on a 20' x 40' sliding barn-style door. The employee lifted the door with a portable power jack to install a wheel assembly and the door fell crushing the employee's hand.,1
An employee fell from the top of a concrete form and fractured a hip and the left leg. The employee was not tied off at the time.,1
"While cleaning a paper jam on the lid machine, the die amputated the employee's right index fingertip.",1
"On April 18, 2017, at approximately 9:00 p.m., an employee was using a spray nozzle when it stopped working then suddenly started up again. He lost control of the nozzle and sprayed his right thumb lacerating it. He was hospitalized for surgery on a torn tendon.",1
An employee tripped and fell dislocating a shoulder.,1
"An employee was chipping gunite from the underside of steel beams using pneumatic tools while in an aerial lift. A large piece of material (approx. 600 pounds) broke loose and fell into the lift basket, overloading it and putting it into an automatic slow descent. The employee fell and the lift basket struck him resulting in multiple cracked vertebrae, and head, wrist and knee injuries.",1
An employee was carrying a container of water. The water spilled and the employee slipped and fell breaking a hip.,1
An employee was walking around the outside of a trench while an excavator was removing old PVC pipe. The pipe shattered and a fragment struck the employee's left eye.,1
"An employee was cutting wood using the trim track machine when the machine jammed. After clearing the jam, the employee's left middle, ring and pinky fingers were amputated by the saw blade.",0
An employee was making a delivery and was bitten on the hand by the resident's dog.,1
An employee was lifting 40 lb. boxes of chicken and suffered a groin pull.,1
An employee tripped over a pallet and fell breaking his hip.,1
"An employee was working on a fresh air intake fan. The electrical source of energy was locked out, but the residual sources of energy were in the process of being locked out when his hand was caught in the pulleys resulting in the amputation of his left pinky at the knuckle and amputation of the ring, middle, and index fingers.",0
Two employees were walking down a steep grade. Employee 1 dislodged a large rock that rolled down the grade and struck employee 2 in the lower leg causing a compound fracture.,1
An employee was cleaning wood pieces out of a chop saw and suffered a partial amputation of the left index fingertip.,0
An employee was operating an electric pallet jack to move a semi-assembled motor mounted on a frame chassis. The employee was walking backwards with the pallet jack in front when his right thumb was caught between the steering control of the pallet jack and the storage rack resulting in blunt force trauma and a deep tissue laceration.,1
An employee was adjusting a rathole ring clamp. The ring clamp slipped off the rathole and the employee lost his balance and fell into the cellar resulting in a broken ankle.,1
"On April 18, 2017, while making a delivery, an employee fell from the back of the delivery truck and suffered a head injury that required hospitalization.",1
An employee was handling a knife when it punctured his left forearm.,1
An employee was entering an aircraft hanger through a large rollup door on a powered wheelchair when the door descended on her head. She suffered a fractured jaw and severe lacerations.,1
"An employee was placing a metal stabilizing ring on a cardboard drum when his left pinky finger was pinched between the stabilizing ring and the drum, partially amputating his fingertip.",0
"Two employees were working between two walls of a machine, troubleshooting the vacuum system. One of the employee's ankles was pinned between moving parts when the machine started resulting in hospitalization for surgery on a broken ankle.",1
"After loading asphalt on a roller, an employee attempted to clean the roller using a hammer. The hammer became caught in the roller and the employee's arm was pulled into the machine, fracturing the arm and wrist.",1
An employee was cutting wood with a circular saw when the saw kicked back and amputated the employee's left index finger.,0
"An employee was struck by a bull while herding cattle, suffering a broken pelvis.",1
"An employee was on a ladder painting when he fell off, breaking his heel and ribs.",1
"An employee was transporting a pump used with hydrofluoric acid in a box. He was attempting to stop the pump from tipping over when he contacted the pump's acid residue, suffering chemical burns to his hand that required hospitalization.",1
"An employee dumped wet mud out of a dump truck and was closing the tail gate when it smashed the ring and middle fingers on both hands, causing an amputation.",0
"An employee was letting down a car lift when the lift came down on his left hand, amputating his middle finger.",0
"An employee was packing bottles on a palletizer when his left hand was caught between a pallet and the palletizer, crushing four fingers. The palletizer was unguarded at the time.",1
"An employee was dispatched to inspect an electrostatic precipitator (ESP). While walking from the ESP to the office trailer, the employee was overcome by sulfur dioxide fumes.",1
"An employee was using a gasoline-powered demolition saw to cut a metal tower when a fire occurred, causing second degree burns to the employee's leg.",1
"An employee was cleaning a conveyor belt when the belt became energized. The employee's hand was caught between the belt and the conveyor pulley, causing a serious injury that required hospitalization.",1
"An employee was on a ladder trying to tie himself off onto a cable pole when the cable line broke. The employee then fell approximately 12 to 15 feet to the gravel ground, sustaining head injuries that required hospitalization.",1
An employee was fitting pipe together for a sewer line when the bucket of a trackhoe fell off and struck him. The employee was hospitalized.,1
"An employee was installing pipe insulation from an extension ladder. As he started to descend from the fourth rung, he missed a rung and the ladder slipped. He fell to the floor and fractured his right hip.",1
"While installing a building wrap to waterproof a balcony, an employee grabbed onto the 2x4 guardrails and fell 15 feet with the rails to the lower level before falling an additional 20 feet to the ground level. The employee suffered a broken back and twisted spine.",1
An employee was using a powered industrial truck with a man basket when the basket with the employee in it slid off the forks to the ground. The employee suffered a fractured wrist and a laceration to the side of the body.,1
"An employee was driving a haul truck when the vehicle drove off the road and overturned. The employee struck his head on the cab of the truck, suffering a forehead laceration and compression fracture to his cervical vertebrae.",1
"An employee fell approximately 15 feet through the roof and struck the concrete floor below. The employee sustained fractured vertebrae, a head injury and a lung contusion. The employee was wearing a personal fall arrest system at the time.",1
"An employee and a coworker were securing a forklift to a trailer for transport using chains and ratchet binders. The machine was chained in all four corners and the last place to secure was the forklift mast. The forks were in the up position to allow the truck ramps to be folded. The coworker climbed into the forklift and lowered the forks. The employee had been adjusting the position of the tie-down block on the trailer deck and was unaware that the forks were being lowered. The employee's left hand became pinched between the block and the fork, breaking the middle and ring fingers.",1
"An employee was drilling holes in copper tubing while wearing gloves. As she moved a part into position and began lowering the drill head, her right hand bumped the drill bit, which caught the fabric of the glove and pulled her right hand into the bit. The drill bit deeply lacerated her middle finger and partially amputated her pinky and index fingers.",0
"On April 19, 2017, an employee suffered a hand degloving after it was caught in the point of operation of a milling machine during a maintenance activity.",1
An employee was clearing sticks from the chain belt of a machine when two of his fingers were caught and fractured between the chains.,1
"On April 19, 2017, an employee was attempting to clear a plugged fiberglass tube from the sheet molding compound machine's glass cutter. While pulling the fiberglass through the tube, the employee's right middle fingertip struck the rotating cotton roller and was amputated. The machine was unguarded at the time of the incident.",0
"While installing a shear panel, an employee fell approximately 8 feet to a balcony below, breaking several ribs.",1
"An employee was assisting a customer with his pizzas when he tripped over a box in the parking lot and fell, breaking both feet and his left femur. He was hospitalized and had surgery.",1
"An employee was unloading a pallet of sod from the back of a box truck with a bobcat. He was holding onto the back of the bobcat when it tipped forward. Then the pallet of sod fell off and the bobcat tipped back upright, causing the employee to fall backwards onto the pavement. He sustained a head injury and was hospitalized.",1
An employee fractured his left pelvis area on the paper machine winder when his body became wedged between two rolls of paper.,1
"An employee was reheating food with a re-thermalizer when hot water splashed into the employee's face and eye, causing burns that required hospitalization.",1
"An employee fell to the gravel ground while walking and landed on her left pinky finger, lacerating and breaking it and also sustaining a metacarpal fracture.",1
"An employee was operating a punch press when it malfunctioned and came down, amputating two fingers on his right hand.",0
"An employee was on a ramp with a dolly when the dolly moved away from him and he fell down. His right hand was then caught between the dolly and the ramp, amputating his middle fingertip with no bone loss.",0
An employee amputated the right index fingertip while attempting to repair the balance on the forklift truck.,0
"An employee was climbing on a bulk of lumber when he fell and hit his head, requiring hospitalization.",1
"On April 19, 2017, at approximately 3:20 p.m., an employee was operating the chipper when a slab became hung up in the mouth of the chipper. The employee turned off the vibrating conveyor and gained access to the opposite side of the chipper. He pulled on the slab. When the slab came free, his hand was smashed between the slab and mouth of the chipper, amputating his right ring finger near the first knuckle.",0
"An employee was rolling a channel to punch holes. The employee had the channel in the vertical position and was attempting to lay the channel flat by hand when the employee's finger was smashed and amputated between the channel and a railcar
.",1
An employee was servicing a bulldozer and attempting to grease a fitting located between the blade and the bulldozer. He slipped and his right ring finger was caught and amputated in a pinch point between the bulldozer and the blade.,1
"An employee was cleaning a sewer drain with a high-pressure hose. The hose had to make a 90 degree turn at the bottom of the manhole. Instead of making that turn, the hose circled back around and came out of the manhole, striking the employee on the left arm and causing three lacerations.",1
"On April 20, 2017, at approximately 4:30 a.m., an employee was checking the inside of a solution tank. As he turned to walk away, his foot was caught by a hose on the floor, causing him to fall onto his right knee. He was hospitalized for a fractured right femur.",1
"An employee was standing on the third rung from the bottom of a 6-foot step ladder patching concrete on an adjacent wall when he lost his balance and fell off, landing on his back and fracturing his pelvis.",1
An employee's finger was caught and amputated in a closing box truck door. The employee also suffered two broken fingers.,0
"An employee was walking from his office to his personal vehicle in the parking lot. As he descended some wooden steps, he slipped and fell down 3 to 4 stairs to the asphalt parking lot, tearing the quadricep tendons in both of his knees. He was hospitalized and had surgery.",1
"An employee was splashed in the face with hot rinse water (approximately 140 or 150 degrees F) from a hose as he was transferring the rinse water to another tank. The employee was wearing PPE-safety glasses, apron, gloves, steel toed shoes, but no face shield.",1
An employee was bringing a car onto a flatbed tow truck using a winch system when the truck slipped from the winch and hit the employee on the left side of the body. The employee suffered fractured ribs and was hospitalized.,1
"An employee was checking a tire on a car and was spinning the tire when his left hand was caught between the wheel and the brake caliper, breaking his left index finger.",1
An employee was guiding a forklift operator through the warehouse with a work platform when the work platform became caught on a pallet of animal food and slid off of the forks of the forklift and on top of the employee. The employee suffered a dislocated left shoulder and possible shoulder fracture.,1
"An employee was using a drill press to drill metal when the metal became caught and then released. His left arm then became wrapped around the drill bit, fracturing it and requiring hospitalization.",1
"An employee was gathering materials to construct concrete formwork. The employee picked up a sheet of plywood not realizing it was covering an existing floor hole. As a result, the employee stepped into the floor hole and fell approximately 12 feet to the next lower level, suffering wrist and neck injuries that required hospitalization.",1
An employee fell from a ladder and injured his back as he was ascending with a mortar bucket to a single story roof.,1
"An employee was walking from a snow vehicle to the base area lodge when he slipped on black ice and fell, fracturing his right ankle and requiring surgery.",1
An employee was attempting to unjam a pallet dispenser when the first digit of his left ring finger was amputated.,1
"An employee was attempting to free an approximately 1/8"" piece of plastic material lodged in a saw blade channel. He was wearing gloves and using his left middle finger to quickly sweep the material away when the running saw blade caught the glove and pulled his left middle finger into the blade, amputating it between the distal and middle joint.",1
"On April 20, 2017, an employee was performing maintenance on a conveyor belt when his right thumb was caught and amputated in the belt's chain and sprocket drive.",0
"An employee was unloading steel bars from a truck. The employee was prying bundles apart with a pry bar when the tool slipped and the employee fell off the truck, suffering a broken hip.",1
An employee was lifting a manhole cover when it slipped and amputated the right middle finger of another employee.,0
An employee was offloading dry fertilizer from a train car into a dry facility using an auger system when his foot and leg were pulled into the auger resulting in amputation of the leg.,0
"An employee was replacing a broken bolt on a pneumatic cylinder of a 3,000 ton aluminum extrusion machine and amputated the right thumb at the first knuckle joint. The machine was guarded by distance with a guardrail system. The machine was running at the time.",0
An employee was moving pallets of freight on the dock and pinned their leg between the electric pallet jack and the pole resulting in a fractured ankle.,1
An employee tripped over an electrical cord and fell on her right side fracturing the right hip.,1
"An employee was attempting to unjam a wire cable from a winch when the employee's left hand entered the winch, amputating the middle fingertip.",0
An employee was operating a baggage tug when his lower left leg was caught and fractured between an upright pillar and the baggage tug.,1
"An employee was inspecting a pressure gauge on the back side of a powder coating booth when a hose came loose and struck the employee in the left eye, lacerating the cornea.",1
"An employee was delivering coffee to a customer when she fell and hit the ground, injuring her head.",1
An employee was using a chain to winch an object when the chain snapped and a tow cable smashed through the window and broke the employee's right arm.,1
"An employee fell 20 feet while climbing a ladder, suffering fractures to the skull, back, right leg, and right ankle, as well as a small brain hemorrhage.",1
An employee was chopping raw bacon when the knife slipped and amputated the employee's left index fingertip.,1
An employee fell into a trench while chipping concrete and was impaled by a piece of rebar.,1
"An employee was operating a bone-in saw to cut meat when his left hand slipped off the meat and contacted the blade, amputating his left index fingertip.",0
An employee was cutting material and amputated his left ring finger.,0
An employee was riding a pallet jack and fell off. The unit then ran over his foot fracturing it.,1
While installing a belt driven motor assembly an employee's finger was caught between a belt and the sheave resulting in a laceration to the little finger on his right hand. The employee was admitted to the hospital in preparation for surgery.,1
"An employee was working on the rig floor installing a lift cap into a mud tool. As the driller came up with the elevators his right middle finger was caught in between the elevators and the lift cap, partially amputating his finger.",0
"An employee was struck by a motor vehicle while working within the work zone installing reflectors and was hospitalized with severe injuries including four fractured vertebrae, a broken bone in the neck, a concussion and various abrasions on the arms.",1
An employee was operating a UTV while conducting soil sampling and struck a ditch causing the employee's head to strike against the roll cage of the UTV.,1
An employee caught a finger in a cardboard baler door causing a laceration that required surgery and hospitalization.,1
An employee had climbed onto warehouse racking and stepped off the racking onto a pallet that was being carried by a forklift. The pallet broke and the employee fell 9 feet with the pallet falling on top of him resulting in fractured vertebrae and 10 stitches.,1
An employee fell 15 feet from a wet ladder fracturing the L2 vertebra.,1
"An employee was checking water lines for leaks. When he found a leak, the employee applied a pincher device that crushes the line to stop the flow of water. A clamp on the device popped off and struck the employee on the chin fracturing four teeth on his lower jaw.",1
An employee tripped on the bottom step of a customer's residence while delivering a package. The employee fell and fractured her left ankle in three places.,1
"An employee engaged in framing and drywall operations fell through an elevator shaft resulting in broken legs, a broken arm and multiple lacerations. The height of the fall was approximately 20 feet.",1
An employee was scanning merchandise and was struck by a forklift resulting in a fractured ankle. The employee was hospitalized for surgery.,1
"An employee was cleaning a car lift using a water hose to remove oil and grease buildup. The employee was standing on the car lift which was about 12 inches off the ground. When the employee stepped down from the car lift, he slipped on the wet floor and fell suffering a head injury and broken ribs.",1
A temporary employee was using a metal drum lift to lift a 55-gallon plastic drum to raise and tip the drum over and pour the suntan product mix into a container to be weighed. He placed his hand on the lift's clamp while the drum was in a vertical position. The drum slipped and his right index finger was caught between the top lip of the drum and the clamp resulting in the amputation of his right index fingertip.,0
An employee was performing maintenance on a climbing wall from an aerial lift. The lift tipped over after going over a slope. The employee fell to the grass and fractured his upper leg and arm.,1
An employee was standing near a pallet on a forklift when the load shifted and product fell off the pallet striking the employee and fracturing a hip.,1
An employee was operating a tail stretcher machine that uses a roller/rail system and caught his left finger in the roller amputating the fingertip.,1
"On April 21, 2017, an employee was attempting to use a tool to remove a jam from a machine when the tool became caught in the machine's auger along with the employee's left index finger.",0
An employee sustained a partial amputation to the right thumb and index finger while cutting aluminum on a table saw.,0
"An employee was feeding rubber into an extruder and got their hand caught in the conveyor belt, crushing their hand. The belt was not guarded at the time.",1
An employee placing a mold into an injection machine had his finger crushed when the mold closed.,1
"On 4/21/2017 at 11:30 a.m., an employee was using a circular saw to cut a 2x4 when his hand contacted the blade resulting in lacerations and a fracture of his left index finger. The employee was hospitalized for surgery to repair the fractured finger and tendon damage.",1
Two employees were moving a post tension machine to another location. The injured employee's left hand was inside the machine when it turned on resulting in a partial amputation of three fingers.,0
The employee was sanitizing a metal wire mesh conveyor belt. The employee dropped the wire mesh conveyor belt and it landed on his fingertip resulting in amputation of the fingertip.,0
"An employee was performing roofing operations and fell from the roof sustaining broken ribs, arms and a leg.",1
"An employee was driving an excavator down a ramp from the second floor to the ground floor when the boom struck a slab and caused the equipment to stop. The employee's body then moved forward and struck the windshield, causing head and neck injuries.",1
An employee was getting ready to perform an oil change and was struck on the head by an object or the employee struck his head on an object resulting in a concussion.,1
"On April 22, 2017, an employee had one foot on a fold down platform located on a platform riser and another foot on the running gear step (holding nurse tanks). As the employee tried to connect the hose, the employee stepped back and missed the counter weight. The left leg slipped into the opening of the running gear (step) and was caught causing a contusion to the right leg and knee.",1
"An employee was working on the extrusion line that was down for a quality issue. The rollers were still powered, but no boards were going through the tank. The employee's hair was caught in a roller that propels the product through the mist tank resulting in a scalping injury.",1
An employee was moving a manlift onto a freight elevator when it fell onto his left leg resulting in a compound fracture.,1
"On April 22, 2017, an employee was picking product from a pallet on the floor to load onto a pallet jack and struck his head on the racking system. Later that evening, the employee collapsed at home and was hospitalized for a possible concussion.",1
"An employee slipped on the wet, concrete floor and fell fracturing the left ring finger.",1
"An employee was cleaning casters (wheels for carts) in a container filled with a solution of water and ""soak tank charger."" While cleaning the casters the solution splashed onto the employee's left elbow and right ankle. The employee was hospitalized with third degree chemical burns.",1
"While an employee descended a wooden stair case, a stair tread began to give way. The employee shifted his weight to the handrail and the handrail gave way, causing the employee to fall approximately two feet to the ground. The employee landed on his back, then slid down the hill and contacted a concrete barrier. The employee was hospitalized with lower back pain.",1
The employee was stacking pallets outside the store near the dumpster. The employee stepped on uneven ground between the dock and the dumpster and fractured an ankle.,1
An employee was cleaning the top of a baler and slipped off a stool fracturing the left wrist.,1
"An employee was wearing safety glasses while working on a water tower. When he descended the tower and took off his glasses, he felt debris in his left eye. His eye later began to bleed and felt painful, requiring hospitalization.",1
An employee suffered from smoke inhalation while evacuating patients from an area where there was a fire. He was hospitalized overnight.,1
"Two employees were removing an air shaft. When one employee pulled the shaft, the other employee's left ring fingertip was amputated.",1
The injured employee was pushing a tree that was being cut by another employee with a chainsaw. The chainsaw kicked back and struck the injured employee's left leg resulting in a four-inch laceration.,1
"An employee responded to an alarm in the mechanical room. He noticed a loose belt flapping and turned off the motor to adjust the belt on the air handler. When he went to inspect the belt, his finger was caught between the spinning belt and pulley resulting in a fingertip amputation.",1
An employee was transporting a resident and tripped over the wheelchair footrest. She fell and fractured her femur.,1
An employee was struck on the left side by a cable coming from the cable drive while drilling.,1
The employee was cutting a sample aluminum pipe using a paper cutter and amputated the left ring fingertip.,1
"An employee was using a standing forklift to remove material from a weighing area and place it back on its rack. As he was reversing the forklift, he was about to strike the rack behind him and put his hand up to protect himself. His left hand was then crushed between the forklift frame and the metal frame of the rack.",1
An employee was moving from one scaffold level to another when a board slipped causing him to fall.,1
"While attempting to align fiber cement boxes weighing 300-400 lbs. on a forklift, the boxes shifted, catching the employee's left hand between the edges of the top and bottom boxes. The employee's left middle finger was amputated at the first knuckle joint and the left ring finger was crushed.",0
An employee was walking from his workstation when he tripped over a sling strap resulting in a fall and a broken left femur.,1
"Employees were tripping pipe out of the hole. An employee wanted to roll a pipe section from the catwalk onto the skate. The pipe was having difficulty rolling, so the employee changed the angle of the catwalk. The employee operating the catwalk lowered the catwalk on one corner using the hydraulic to level it out. The employee who was rolling the pipe got his foot crushed underneath the corner of the catwalk when it was lowered.",1
"A forklift was used to attempt to remove a stuck electric pallet truck from inside a trailer. One end of a towing strap was attached to the forklift carriage and the other end was attached to the battery plate on the pallet truck. When the forklift operator backed up, the battery plate came off the pallet truck and struck an employee who was standing nearby in the head.",1
An employee was changing out a capsule of dish detergent in the dish machine when product spilled onto his arms. The employee sprayed hot water onto his arms to get the soap off resulting in thermal burns to both arms.,1
An employee was unjamming the slitter machine and amputated four fingers.,1
"On April 24, 2017, an employee fell from a rolling staircase ladder while repairing the mast on a hi-lift. The employee was hospitalized for a skull fracture.",1
An employee was grinding sheet metal with a hand held angle grinder and lacerated his leg above the knee.,1
"On April 24, 2017, an employee was pushing her chair to a storage area at the end of the shift and the chair tipped forward striking her arm/shoulder. The injuries will require surgery.",1
An employee was struck in the head by a garbage truck hopper resulting in a neck injury and hospitalization.,1
An employee was descending a wooden ladder and fell approximately 14 feet resulting in two broken ribs and two fractured vertebrae and a head injury.,1
"On April 24, 2017, an employee fell off a rail car suffering internal injuries.",1
"An employee was walking out of the facility at the end of her shift, tripped and fell resulting in multiple fractures and dislocations including a fractured left foot, a dislocated right knee and a fractured and dislocated right elbow.",1
An employee was working checking the hydraulics on the winder machine when his hand was caught in a pinch point. The employee suffered a laceration to the right palm and a fractured thumb. The hydraulic portion of the machine was not locked out or tagged out at the time.,1
"An employee was struck by a vehicle while walking across a customer's lot to speak to another driver. The employee was hospitalized for three fractured ribs, a collapsed lung, a head injury and a laceration to an ear.",1
An employee was cleaning the ink reservoir on a printing press and the rag he was using was pulled into the rollers along with his hand. The tip of the employee's right pinky finger was amputated.,0
"In the shelf line area, an employee was reaching over a conveyor belt to inspect the welded brackets on a piece of thin sheet metal when her hair got caught in the conveyor belt. The employee used her left hand to try to pull herself free when her left hand got caught in the conveyor belt resulting in amputation of the left pinky fingertip.",0
An employee was using a hoist to align a bolt in a front disc brake when he dropped the bolt. The employee went to pick it up and his right index finger slipped inside the bolt hole. The hoist was activated at the same time and the employee's index fingertip was amputated.,0
An employee was working in the garbage truck's engine compartment and amputated a finger when it was caught in the belt and pulley.,1
An employee was testing a condensate pump and received an electrical shock.,1
"At about 8:50 p.m. on April 24, 2017, a press operator received a serious laceration to the elbow area of the left arm while handling a metal frame rail. The operator was hospitalized as a result of the injury.",1
An employee was operating a pedal-activated chop saw to cut boards and amputated two left fingers.,0
Employees were installing a jib crane. A beam fell off of a forklift and struck an employee in the back resulting in five broken ribs and a punctured lung.,1
"An employee was using a portable cutting and beveling tool to cut a bevel on the end of a 24"" schedule 120 pipe. The employee's gloved hand was caught and pulled between the beveling die and the pipe causing a partial amputation of the left index finger.",0
An employee was trouble shooting a planer that was making noise. The employee took off the guards and disassembled the planer. The employee plugged the motor in and while he was checking the bearings his right hand contacted the rotating planer blades resulting in multiple finger amputations.,0
An employee was driving a road grater when the blade struck something in the ground causing the grater to stop suddenly. The employee was jolted resulting in cracked or slipped vertebrae.,1
"An employee was attempting to release an equipment die lock with a crow bar. When the die lock released, the crow bar slammed upwards pinching the employee's right pinky finger against the equipment guard rail resulting in a fingertip amputation.",1
An employee was moving materials in his truck and injured his back.,1
"An employee tripped and fell, breaking a hip.",1
An employee was lifting a trash compactor off the shipping skid using a forklift. The compactor started to lean over and the employee was struck by the falling compactor as he tried to catch it. The employee suffered injuries to the face and mouth and lost a few teeth.,1
An employee was installing a new gang saw when the employee's left hand was caught in the chain and sprocket resulting in a laceration and crushing injury to the index and middle fingers. The fingers were surgically amputated at the middle joint. The machine was not guarded or locked out at the time.,0
An employee sustained a fractured ankle while delivering food at a customer site.,1
An employee sustained head and nose injuries while using an overhead crane/hoist/chain/hook system.,1
An employee had just removed a shaft from a film roller and had a finger in the air valve when the valve closed and lacerated/fractured the employee's finger. The employee was hospitalized.,1
An employee tripped when dismounting a forklift and suffered a broken ankle requiring medical treatment.,1
"An employee was moving a bulk mail container when his foot became caught on a strap protruding from a pallet he was passing, causing him to trip and fall. He was hospitalized for a broken left hip.",1
An employee was on a delivery route when she stepped out of her truck and onto the edge of a culvert and fell fracturing her left ankle.,1
"An employee was loading a 3 inch iron flow pipe (18 inches long) onto a trailer when his left ring finger became caught between the pipe and the trailer, resulting in amputation of his left ring fingertip.",0
An employee was loading his grocery-delivering cart at a customer's location when he lost his footing while tipping the cart over and fell backwards. The loaded cart fell on his right thumb amputating it above the first knuckle.,0
An employee was moving heavy machinery over steel rollers when his hand became caught in the metal rollers. He was hospitalized for crushing injuries to his fingers.,1
"An employee was installing a conveyor motor cover, when four of the fingers on his right hand were crushed by a chain and sprocket in the running motor. One fourth of the right index finger was later amputated at the hospital. The conveyor was not locked out at the time of the incident.",1
An employee was walking down the hall towards the elevator when she slipped on wet flooring and fell fracturing the left knee.,1
An employee was standing in an excavated pit approximately 2.5 feet deep and 5 feet wide when the side wall caved in on his leg resulting in a fracture.,1
"An employee was connecting a gooseneck trailer to a truck and manually adjusting the hitch onto the ball when the trailer dropped onto the ball, amputating the employee's fingertip.",0
"On 4/24/2017, an employee was working on the roof and started to feel ill. The employee was hospitalized for heat exhaustion.",1
"An employee was checking a belt in an HVAC unit on a roof. The unit was shut off and locked out. However, 30 mile per hour winds caused the fan to move and pinch the employee's left pinky finger between the belt and the pulley, resulting in amputation of the left pinky fingertip.",0
An employee was struck by a powered industrial truck while walking and was hospitalized for a crushed/fractured leg.,1
An employee tripped over an ergonomic mat in the kitchen and fell fracturing her femur.,1
An employee was pushed by a patient in the emergency room and fell backwards striking his head on the floor. The employee was hospitalized for a concussion.,1
An employee was operating a moulding unit when the employee's left hand became caught in the machine resulting in fractures and lacerations.,1
An employee was waterproofing and fell while descending a ladder resulting in a broken left wrist and a broken right ankle.,1
An employee was loading a pallet into a trailer from the inside of the trailer when a pallet contacted the stack and caused pallets to fall. The employee shifted to avoid a falling pallet and fell onto the floor of the trailer. The employee was hospitalized for back and hip injuries.,1
An employee was servicing a molding press and was using a 4x4 to remove a press screw from inside the machine barrel. The 4x4 moved forward and pinned his right hand against the machine resulting in amputation of the right thumb tip.,0
An employee was installing a seal on a large shaft when it slipped and pinched his right index finger between the shaft and a flange. The employee was hospitalized and his right index finger was amputated at the first knuckle.,1
"An employee was performing welding work from a ladder when he lost his footing, fell from the ladder, and fractured his leg.",1
An employee was struck by a check value that he was removing while it was under pressure.,1
An employee was wiping a bearing on the 50-gallon reactor with a rag when the rag was caught by the rack and pinion pulling the employee's left hand into the moving gears. The employee's left thumb tip was partially amputated.,1
"An employee was operating a press when their right thumb became caught in the machine, resulting in amputation of the right thumb.",0
"An employee was replacing a HVAC fan belt when their thumb became caught between the belt and pulley, resulting in amputation of the thumb.",0
"An employee was checking merchandise totes in the grocery receiving area when the employee tripped over a pallet and fell, resulting in hospitalization for a fractured hip.",1
"An employee was descending a wet staircase after delivering a parcel when she slipped and fell down the stairs, resulting in a broken right femur. The injury required surgery.",1
"An employee was working on drywall from a ladder, when the employee fell from the ladder approximately 6 feet to the floor. He was hospitalized for seven broken ribs and a kidney laceration.",1
An employee fell to the ground while sitting down in her desk chair and injured her left hip.,1
"An employee was closing the overhead door on a truck body when the door contacted his left hand, amputating his left middle fingertip.",1
An employee was climbing a ladder on a fertilizer trailer to adjust a tarp. The tarp flapped in the wind and caused him to fall from the ladder to the ground. He sustained a compound fracture to his left wrist and a fractured heel. One of his injuries required surgery.,1
"An employee was on top of the tanker truck loading fuel into the tanker. The vapors ignited causing an explosion and throwing the employee 20 feet into the air. The employee suffered third degree burns, broken bones and internal bleeding.",1
An employee was standing on an 8-foot ladder stringing conduit when he fell onto a concrete floor and was hospitalized for four broken ribs.,1
"An employee fell 15 to 16 feet from a ladder to the concrete floor while installing chains for a light system, suffering fractured heels.",1
"An employee was struck by a 7-foot-high bakers scaffold, suffering a compound fracture to his leg.",1
"While working at a metal shear, an employee's middle fingertip contacted the point of operation and was amputated.",0
"An employee was using a chainsaw to cut limbs from a tree overhead while standing on top of a brush cutting machine, approximately three feet off the ground. One of the tree limbs struck the employee's left foot, resulting in amputation of the left big toe at the first joint.",1
"An employee was cutting a piece of cabinet wood on a table saw when his hand contacted the blade, resulting in amputation of his fingertips.",0
"An employee was carrying a pot of hot water to the sink when the employee slipped, resulting in hospitalization for first and second degree burns to the employee's arm.",1
"An employee was on a ladder scraping paint from an interior wall when the employee fell from the ladder and landed on the concrete floor. He sustained lacerations to the inside of both thighs, a loose tooth, and a fractured pelvis.",1
"An employee was loading a palletizing machine when his upper arm became caught between the frame of the machine and a pallet, resulting in a broken right arm. The injury required surgery.",1
An employee was clearing a jam in a filler machine when his left index finger was partially amputated.,0
An employee was walking and performing routine duties when her foot was caught on a steam table causing her to fall. The employee was hospitalized for a broken shoulder.,1
"On April 26, 2017, an employee was working on the second floor installing G-track on top of the shaft when the employee stepped into a stairwell and fell approximately 9 feet. The employee landed on a PVC pipe at the bottom of the stairwell and sustained bone fractures and a broken sternum.",1
An employee was returning from a garbage-collecting route when he experienced dehydration and was hospitalized for heat stress.,1
An employee was removing a metal plate from a shearing machine when the blade cut his right thumb and index finger.,1
"An employee was pressing a bearing when his finger became caught in the press machine, resulting in amputation of his left index fingertip.",0
An employee was struck by a beam that fell off a forklift and was hospitalized for a foot injury.,1
An employee was troubleshooting a machine from a ladder when he fell from the ladder and struck the floor. He was hospitalized for a fractured right leg and fractured right elbow.,1
An employee was moving a pallet jack when the employee's ankle became pinned between the pallet jack and a second pallet jack. The employee was hospitalized for a broken ankle.,1
An employee was leaning on a unguarded conveyor belt of a packaging machine when a finger on her left hand became caught in a pinch point resulting in amputation of the fingertip.,1
"An employee was operating a coil slitter when his finger became caught in the roller, resulting in amputation of his right index finger.",0
"An employee was performing inventory duties in a warehouse when he was struck by a forklift, resulting in hospitalization for an injury to his left leg.",1
"An employee finished installing power line poles and stepped into a truck. The truck derrick made contact with the power line (12kV), resulting in electric shock to the employee. The employee received burns to the hands, feet, and internal body parts.",1
"An employee was sanitizing the muffin machine auger when her right middle finger was caught in the running machine, resulting in a fingertip amputation.",0
An employee was performing maintenance on a vehicle when a car door fell off a stand and struck the employee's inner left elbow. The employee was hospitalized for a severe laceration to his left arm resulting in artery and nerve injuries.,1
"On April 25, 2017 at 10:30 a.m., two employees were installing a fire hose on a fire hydrant for washing piping when a car ran over the hose, causing it to become lodged under the car. The hose and water meter were pulled from the hydrant and struck the employees, knocking them to the ground. One employee was hospitalized for a laceration to the back of his head, bleeding on the brain, and a fractured right ankle.",1
"An employee was changing slips on a rig when his hand became caught in the machine parts, resulting in amputation of part of his finger.",0
"An employee was nailing flooring when a nail gun fired into his right foot, resulting in hospitalization for possible bone damage.",1
"On April 26, 2017, an employee was performing rescreening repair on the roof of a screened enclosure when he lost his footing and fell approximately 15 feet to the ground. He was hospitalized for a head injury, broken ribs, and a spinal injury.",1
"An employee was helping remove a skylight from a roof, when he fell through the opening and struck the ground. He was hospitalized for a broken pelvis, broken arm, and a fractured back. The employee's harness was not tied off at the time of the incident.",1
"An employee was operating a truck and moving trailers in the company yard. She stood on the back of the truck to connect air hoses when she rolled her ankle, fell from the truck, and struck the ground. She was hospitalized for an injury to her right upper body.",1
"An employee was assembling a cooker valve when the employee's finger became caught between two valve parts, partially amputating the employee's right ring fingertip.",0
"An employee was removing HVAC units, when the unit and the employee fell to the ground, approximately 7.5 feet. He was hospitalized for two broken wrists, a knee injury, and a concussion.",1
"An employee was removing excess sheetrock around an elevator shaft when the employee fell approximately 20 feet through the shaft, suffering a fractured elbow and heel.",1
An employee was delivering mail at a customer's residence when the customer opened the door to take out the trash and a dog ran out and bit the employee's right forearm.,1
An employee was washing a piece of equipment while standing on a step ladder that was 24 inches high when he fell off and suffered a whole-body injury.,1
An employee was operating a bulldozer to clear debris when the bulldozer fell into an 8-foot pit. He sustained two fractured vertebrae in the lower back.,1
"An employee was operating a forklift to move drums on a pallet. He dismounted the forklift to adjust two drums that had become off-center on the pallet when a drum fell and struck his leg, resulting in his hospitalization for a broken leg.",1
An employee was opening a dock door when the cable on the side of the dock door broke causing the door to fall on her. She was hospitalized for neck and back injuries.,1
"On April 27, 2017, an employee was using an overhead crane to lower a frame onto the frame table when his left middle finger was pinched between the strut stop and the frame, resulting in partial amputation.",0
"A temporary employee was operating a clamp truck. When the employee dismounted the truck, he was pinned between the truck and an automated guided vehicle. He was hospitalized for pelvic and abdominal injuries.",1
"An employee was installing tips on a robotic welder when the employee tripped on a cover for hoses and cables that was mounted on the floor and fell, striking the door of a welding cage. The employee suffered a fracture to the right humerus.",1
"An employee was operating a glue machine when his hand became caught in the chain and sprocket, resulting in lacerations to four fingers and a partial amputation of his pinky finger.",1
An employee was tightening bolts on the back of a new blade for a wood chipper machine with an impact wrench when the employee's finger became caught between the blade and the washer on the back of the blade. The employee sustained amputation of the left index fingertip.,0
An employee was packing on the line using an extrusion machine when the machine blade activated and amputated her left index fingertip.,1
"On April 27, 2017, an employee was descending a 20-foot ladder when he slipped and fell approximately 6 to 9 feet and landed on his left ankle. He sustained a compound fracture of the left tibia and fibula and was hospitalized. The injury required surgery.",1
"An employee was climbing down a steep staircase aboard a ship, missed a step and landed on the bottom stair, sustaining a fractured left tibia. At the time of the incident, the vessel was on dry dock.",1
"An employee was transferring chemicals from the tinder truck to the applicator when the transfer hose broke open and sprayed her face, especially her eyes, with 32% nitrogen, Acuron and Gramoxone SL. She was hospitalized.",1
"An employee was walking to the back of the bucket truck across the catwalk when the employee tripped and fell approximately 8 feet to the ground, sustaining a broken leg.",1
An employee was walking on the walkway grating when the grating fell off its clippings causing the employee to fall approximately seven feet resulting in a shoulder injury.,1
An employee was examining a tank of hot resin when the mixer turned on and hot resin overflowed onto the employee's arms. The employee was hospitalized for first degree burns to both arms.,1
An employee was melting steel in a furnace when the molten steel contacted piping carrying circulating water and caused an explosion. The employee was burned by steam and molten metal and was hospitalized.,1
An employee was performing chemical titration just before he was found lying unresponsive. He was hospitalized.,1
"An employee was sitting on the ground when a loaded trailer pulled forward and rolled over his leg, resulting in hospitalization for a fracture to his leg.",1
"An employee was walking on the deck of an all-terrain crane. When he held on to the crane door, it opened and caused him to lose his balance and fall 5 feet 10 inches to the ground. He was hospitalized for broken ribs and a collapsed lung.",1
An employee was adjusting film on the back of the matrix machine when his left index finger was caught between a pulley and a belt. He sustained the amputation of his left index finger.,0
"An employee was finishing a coil slitting operation when the coil rotated and caught his left hand between the coil and the divider, amputating his left pinky fingertip.",0
An employee was cutting a beam with a circular saw when the saw slipped and contacted his right hand. He sustained amputation of four fingers on his right hand.,0
An employee was under a tractor operating a hydraulic bead breaker on the inside tire of the tractor when his hand became wedged between the bead breaker and the bar. He sustained a large laceration to his left hand between his ring and middle finger to the middle of his palm and was hospitalized.,1
An employee was installing pipe from a scissor lift when one of the scissor lift's tires fell into a hole in the floor causing the lift to fall over and eject the employee. The employee sustained a broken back and a head injury.,1
"An employee was delivering feed to a farm when the employee's glove and hand were caught on an auger attached to a trailer, resulting in partial amputation of the left index and middle fingers.",0
"An employee was stepping down off a ladder when he missed the last step and fell to the floor, injuring his hip.",1
An employee was working on a power line when the employee received an electrical shock and burns from the power line and was hospitalized.,1
"A temporary employee was on top of a machine when the reset button was pushed, which caused the machine to pin the employee's foot. The employee sustained an ankle dislocation and severe laceration to the foot and was hospitalized.",1
An employee was operating a board edger when he sustained a laceration to his left forearm and was hospitalized.,1
"On 4/27/17, while cleaning a work platform, an employee stepped through a hole in the floor and fell against the guardrail, suffering a spleen injury that required hospitalization.",1
"An employee was working in the irregular package section when a coworker extended a package slide so packages could migrate to a lower conveyor. The employee then walked and hit the slide, falling to the floor and breaking his femur.",1
"An employee was recovering refrigerant from a chiller inside a store and was attempting to put a pressure gauge on the 1/4"" port of the chiller. The valve was missing a part, so refrigerant began to escape from the system when he removed the protective cap. He tried to use a rag to plug the valve and in the process sustained refrigerant burns on both of his hands.",1
"On April 27, 2017, an employee and a coworker were working on a street corner when two men assaulted them. The employee suffered a skull fracture and required hospitalization.",1
"An employee was installing a wood chock to secure a steel pipe. The employee then stepped between two sections of pipe at the same time that a forklift operator was attempting to position the pipe. The employee was caught between the two sections of pipe and fractured four ribs, requiring hospitalization.",1
"An employee was working under a table where a shaft was being installed onto a bearing. As a hoist was lowering the shaft, the bearing was displaced, fell off the table, and crushed the employee's arm.",1
"An employee was operating a table saw when his left hand contacted the blade, amputating three fingertips to the first knuckle.",0
"On 4/27/17, an employee was participating in physical training as part of a SWAT team tryout. The employee had been on site since 7:00 a.m. and experienced dizziness at about 11:45 a.m. He was hospitalized due to dehydration and heat exhaustion.",1
An employee was loading steel beams when two of his fingers were smashed and amputated between two beams.,0
"On April 28, 2017, an employee was assisting a customer refueling their vehicle when she stumbled and fell to the concrete. She suffered an injury to her left shoulder and a fractured left knee. The knee injury required surgery.",1
An employee was struck by a company truck.,1
"On April 28, 2017, an employee was setting up a die on a roller conveyor when the die shifted and rolled on the conveyor, pinching the end of his left middle finger. He sustained a crushing injury resulting in amputation of the left middle fingertip.",0
"An employee was watering flowers when they stumbled and fell, requiring hospitalization for broken vertebrae in their back.",1
"On April 28, 2017, an employee was using a rope to change the felt on a paper machine when his hand was caught in the nip point created by the rope and the shaft. He sustained amputation of the right middle and ring fingertips.",0
An employee was operating a milling machine when their glove became caught in the machine. They sustained a partial amputation to the right thumb.,1
An employee was on a ladder tightening a bolt with a wrench when the employee fell and was hospitalized for a broken leg.,1
"On April 28, 2017, an employee was mixing ingredients for soup when the mixer exit shoot became clogged. While loosening the clog, her glove became caught and she suffered a broken right middle finger and amputated right index fingertip.",0
"On April 28, 2017 at 8:45 a.m., an employee was removing a piece of lumber from a stack of wood when he tripped over the plastic banding surrounding the lumber and fell on the concrete floor. The employee sustained a fracture to his left hip and was hospitalized.",1
"An employee was polishing a part on a manual lathe while wearing cut gloves, when his glove became caught on the fixture and he suffered amputation of the right pinky finger.",1
An employee was using a saw to cut wood and cut his left hand. The employee was hospitalized.,1
An employee was placing screws in a electrical panel when a screw touched wires and created an arc flash. He sustained burns to the left hand and chest and was hospitalized.,1
"An employee was transporting two pallets of pails using a swing lift reach truck, which operates on a guidewire system. The pallet load came in contact with a protruding stored pallet, causing the pallet load to slide towards the employee and strike their left leg. They sustained a fractured left tibia.",1
An employee was walking down stairs while performing security guard rounds and fell down the stairs between the fifth and fourth floors. The employee was hospitalized for a possible ligament injury.,1
An employee was manually feeding material into a punch press when the press amputated the employee's left second fingertip.,0
An employee was attempting to grab an operating circular saw when the employee's right middle fingertip was amputated.,0
An employee was trying to unjam the pins in a braid carrier machine when his right index finger was caught and amputated in the machine.,0
"On April 28, 2017, an employee was performing torch cutting activities from a pallet supported by a forklift when the employee fell approximately 8 feet and fractured the lower left leg. The employee was hospitalized.",1
A temporary employee got two left-hand fingers caught in the palletizer machine's chain drive resulting in lacerations and hospitalization.,1
"On 4/28/2017, an employee was operating a punch press when the employee's right index finger was caught and amputated in the machine.",0
"On April 28, 2017, an employee was filling a propane tank at a customer's house when the propane ignited and he received minor burns on his arm and face.",1
"An employee was placing a sheet of steel in a shear machine when the shear was activated via the foot pedal. The employee's right hand contacted the point of operation, amputating the index finger between the end of the nailbed and the first joint.",0
"An employee was tying rebar at a work site when a rock rolled down a hill and struck the employee's upper body. The employee suffered a broken right arm and left finger, cut over the left eye, and a partially collapsed right lung.",1
An employee was hit in the head while handling a package and was hospitalized.,1
An employee was modifying a slide for a winder on an end milling machine when the employee's right little finger contacted the machine and was dislocated.,1
"An employee was operating a grooving machine when his glove was caught in the machine and his right hand was pulled in, amputating his little finger. The machine was unguarded at the time.",0
An employee cut his hand in a cabinet sander and was hospitalized.,1
"An employee was operating a spreader/sprayer machine to apply fertilizers and herbicides to turf. He was attempting to repair/replace a belt in the machine when his right hand was caught and pulled into its pulley system, amputating his index fingertip. The machine was not locked/tagged out at the time.",0
"While adjusting the height of a machine, an employee's finger contacted moving parts and was partially amputated.",1
"An employee was walking up the stairs when his knee popped and gave out. He fell back down the stairs, breaking both kneecaps and tearing a tendon.",1
"An employee tripped over a rug that had buckled up in an area and fell to the concrete floor, suffering a ruptured spleen.",1
An employee was participating in a training exercise when he fell approximately 10 feet and fractured his right and left legs.,1
"An employee was installing weatherproofing on a balcony of a new residential building when he leaned against the handrail and it failed. He fell approximately 22 feet to the lower working surface, breaking his right arm and left cheekbone and injuring his head.",1
"On April 28, 2017, at approximately 12:14 p.m., an employee was standing on a 6-foot combination ladder to install a new service line from a utility pole to a residential home. He fell approximately 5 feet from the ladder to the ground, fracturing his coccyx bone and right wrist.",1
An employee was installing electrical work from a steel frame when he fell approximately 20 feet to the lower level and sustained broken ribs and a spine fracture. His personal fall arrest system was disconnected at the time of the incident.,1
"An employee was dropping a fill cube into a basin when it was caught on bolts installed inside the basin. He pushed on the fill cube with his hand to free the fill cube. When the cube was freed it pinched his right hand between the casing panel and the basin, amputating his right index fingertip.",0
An employee was delivering mail when she experienced pain in her right leg and numbness in her left leg. She was hospitalized for heat stroke symptoms.,1
"An employee was stepping off a shuttle bus onto the pavement when she slipped and fell, breaking her left ankle.",1
"An employee was replacing an overhead chute that had a hole in it. He began to clean excess cake mix off of the auger when his hand contacted the sifter auger, amputating his index and middle fingers to the first knuckle. The auger was not locked/tagged out at the time.",1
"An employee was lifting a treating iron to make up a connection. After the connection was secured, the employee started to lower the treating iron when he lost his balance and dropped the treating iron. The weight of the load landed on his right leg, breaking his fibula and tibia.",1
"An employee fell off the back of a parked truck while closing the door, suffering an open wrist fracture.",1
"An employee was using a standing drill press to drill a round hole into aluminum when his gloved right hand was caught and his ring finger was pulled into the drill bit, amputating his fingertip.",0
An employee was hit by a bull and sustained a right hip fractured that required surgery and overnight hospitalization.,1
"An employee was operating a laminator that was on a cart when the cart hit a post, causing the laminator to come off the rails it sat on. The employee's right pinky finger was pinched and partially amputated between the frame of the cart and the laminator.",0
An employee was attempting to clear clogged material from a silo's inspection port when the rotary valve flights caught and amputated the fleshy pad of his left index finger.,0
"An employee was looking at the coating on rollers when his hand and arm were pulled into the roller, breaking two fingers.",1
An employee was taking a tray out of a baking oven when her right forearm suffered second degree grease burns.,1
"An employee was operating a stand-up forklift when he lost control and struck a pole, injuring his left leg and foot.",1
"An employee was cleaning out ash from ductwork when he misstepped and fell approximately 3 feet down onto a structural beam, suffering broken ribs and requiring hospitalization.",1
"An employee fell from a ladder while cleaning a shelf, breaking the left leg and requiring hospitalization.",1
An employee suffered respiratory distress when she went into a restroom and found a patient that was smoking.,1
"An employee was helping a patient stand when the patient lost balance, causing the employee to fall back and hit a sink. The employee was hospitalized with a back injury.",1
"An employee was inserting a metal spacer between two roll supports when the rolls closed hydraulically, crushing and amputating the tip of his right thumb.",0
An employee was working from a pole that had just been set in wet and muddy ground. The employee was making the second power line connection when the pole began to lean. The pole slowly leaned to approximately 10 feet from the ground then fell over with the employee still attached to the pole. The employee suffered broken ribs.,1
"An employee slipped on a grape and fell to the ground, fracturing the left knee.",1
"An employee tripped over a liner strap while cleaning and fell to the ground, breaking both arms.",1
"On 4/30/17, an employee was lifting and transferring a patient when the patient fell, causing the employee to injure her neck and back.",1
"An employee and two coworkers were manually tensioning a belt on a belt drive when his left thumb was pulled into the in-running nip point created between the belt and the sieve, amputating his thumb above the first knuckle. He was wearing leather gloves at the time of the incident.",0
"An employee was on an extension ladder attempting to dislodge ice that had become stuck in an ice bin when he fell to the concrete below, fracturing his right pelvis and right arm and suffering a head contusion and blurred vision.",1
An employee was going to cut a piece of flat metal and was using an air clamp to hold the metal in place when the employee's left thumb tip was caught and amputated.,0
"An employee was waiting for potatoes to be graded (using a bulk grader) so that he could load them onto a tractor trailer when he noticed a bad potato on the conveyor. When he attempted to pull the bad potato out, his right index finger was caught in the conveyor's moving chain and sprocket, amputating it to the first joint.",0
An employee was unscrewing the oil and gas pipe and was pushed over the edge of the work floor by the high pressure release. The employee fell 10 feet to the ground and broke his left arm.,1
"An employee was standing on top of a printing press, taping paper down to be run through the machine, when a coworker inadvertently activated the printing press table. The employee then fell off the table and hit the concrete floor, fracturing his right femur. He was hospitalized and had surgery.",1
"An employee slipped and fell while descending stairs, fracturing the left ankle and requiring surgery.",1
"An employee was walking with a scanner, felt lightheaded and fell to the ground breaking his right hip.",1
"An employee was preparing to feed cables to a coworker in an aerial lift. The employee received an electric shock from an elevated cable that came in contact with an energized power source, suffering burns to his left foot, hand, and abdomen.",1
"On May 1, 2017, an employee's hand was caught and seriously injured in a small expander press that was activated via the foot control. The machine was unguarded at the time.",0
"An employee was using an extension ladder to change a light bulb outside near the trash compactor when the employee fell approximately 5 feet to the ground, suffering fractured ribs and a brain injury.",1
"Employees were moving calendar rolls around in the roll storage area of a deep well. The injured employee was walking between a suspended roll and a roll on the ground when a crane operator changed the direction of travel to avoid striking an adjacent roll. This change of direction caused the suspended roll to pin the employee between the suspended roll and another roll, fracturing his pelvis.",1
An employee was servicing an A/C unit with a clamp-on amp meter. He removed the cover to test the A/C when his left middle fingertip was caught and amputated (no bone loss) between a belt and pulley.,0
An employee was using a table saw to make prototype and merchandise products when the saw amputated the employee's left index finger.,0
"An employee was using a vertical stacker to raise trusses. When the employee pushed the stacker bar over, it started to fall. As the employee tried to catch it, the stacker pinched and amputated the employee's fingertip.",0
"An employee was walking to the front of the store to start her shift when she tripped and fell to the floor, fracturing her left hip.",1
"An employee was operating a motorcycle on a trail when her wheels were caught in a rut on the side of the bike, causing the bike to overturn and land on her right leg. She broke her right tibia, fibula, and ankle.",1
"An employee was using a sledgehammer to nail a stake into the ground. When he swung the hammer, it missed the stake and struck his hand, breaking it and requiring hospitalization.",1
"An employee was operating a V-notch hydraulic press when it partially amputated the second, third, and possibly fourth finger of the employee's right hand.",1
An employee was walking in a main aisle when a forklift ran over the employee's right foot. The employee was hospitalized and had surgery.,1
An employee was loosening turnbuckles to remove lashing bars from containers when one of the bars came loose and fell and struck the employee's mouth. The employee suffered a fractured jaw and broken teeth.,1
"An employee was adding hot oil to a hydraulic line when an air pocket bubbled up and splashed his neck, causing burns.",1
An employee was descending a two-step round stool when she twisted and fractured her right foot. She was hospitalized and had surgery.,1
"After removing a pipe hanger from the ceiling, an employee was descending a fixed ladder when he misstepped and fell 11 feet to the concrete floor, breaking three vertebrae and requiring surgery.",1
An employee was stepping off an excavator when his wedding ring was caught on the excavator catwalk and his ring finger was de-gloved.,1
"While carrying a lid on a railcar, a temporary employee fell from the railcar to the ground, suffering a broken cheekbone and wrist.",1
"An employee was in the bucket of a boom truck 20 to 25 feet in the air, removing vinyl lettering from a window, when a strong wind gust blew over the boom truck. The employee was ejected from the bucket as the truck hit the ground, suffering a possible fractured neck.",1
An employee was reaching through a 4-inch hole to drill a pilot hole into an electrical panel when his left finger touched the trigger on the drill and turned it on. The drill then lacerated the top of his left hand.,1
"An employee was using a portable press to square a metal frame for a gasket application when the hydraulic hose became bound during expansion. The buildup caused a hydraulic rupture that dislodged the press from its mooring. The press struck the employee and knocked him from his ladder. He struck his head when he landed, causing a concussion and scalp laceration that required hospitalization.",1
"An employee was in a 4-foot-deep elevator pit removing forms from the area when dirt fell from the top, landing on and breaking both of his legs. He was hospitalized.",1
"An employee used a ladder to get a box of batteries from a top bin. The box was too heavy and she fell off the ladder, landing on and injuring her right leg. The box fell on and injured her right arm.",1
An employee was gathering wooden door fronts from a conveyor when the employee's right middle and ring fingers were caught in the chain and sprocket along the conveyor line resulting in a laceration to the ring finger and a broken middle finger that required surgery. The chain and sprocket on the conveyor were unguarded at the time.,1
"An employee was attempting to put a pick conveyor's idler roller back in its track when his left hand was caught between the idler roller and the conveyor (pick) belt. His skin was removed from the back of his left hand, requiring hospitalization and surgery.",1
An employee was riding in a forklift being driven by a coworker when he fell off. The forklift then ran over both of his feet.,1
"While using a tarp to cover cargo on a flatbed trailer, an employee slipped and fell about 4 feet to the ground, suffering broken ribs and a partially deflated lung. The flatbed was wet due to rain at the time.",1
"An employee was carrying a bucket of debris when he tripped and fell over a grate that had been removed, injuring his left knee.",1
An employee was servicing the puller at the end of a press when the puller moved and struck his knees. He was hospitalized.,1
"An employee turned around, tripped over a wheelchair, and fell to the ground. She suffered a fractured hip and cuts to the face and knee, requiring hospitalization.",1
"An employee was coming out of a group home when she turned around to avoid a bee and fell, fracturing her femur.",1
"An employee was carrying a conference tabletop up a stairwell with three other men. He put the table down to reposition it and his right index finger became caught. When he pulled his hand, his index fingertip was amputated.",0
"An employee was removing an oak tree limb from a powerline. After cutting a considerate amount of brush off the limb, he freed the powerline. The tree limb became disconnected and fell to the ground, where it bounced and hit his left leg below the knee, breaking his tibia and requiring surgery.",1
"At approximately 12:45 p.m. on 5/1/17, an employee was holding a case of liquid shortening weighing approximately 20 pounds and was twisting to set it on an order picker when he tripped and fell to the floor, fracturing his right hip.",1
"While loading water from a pipeline into a trailer, an employee was struck by a pipeline pig that ejected out of the pipeline. The employee suffered a broken ankle and leg.",1
An employee was mowing a lawn with a push mower and lacerated his left big toe.,1
"An employee was removing insulation from refrigerant piping when a moving fan contacted the employee's right hand, breaking and lacerating the right index and ring fingers.",1
"An employee was working at a client's commercial building and climbed through an attic opening to check a conduit. The attic had no stairs and a ladder was used through the opening. The attic opening was approximate 30"" by 30"". When he attempted to come back down the ladder, he slipped and fell 10 feet through the hole to the floor, breaking his left arm and two fingers and cutting his left hand. He was hospitalized.",1
"An employee was measuring the office for modification using a rolling chair when she fell, hit her head on a counter top and then fell onto the floor. She was admitted to the hospital for treatment of a head laceration and a fracture L1 and L2 vertebrae.",1
"An employee was working on powerline switches when an arc flash occurred, burning his left hand and arm, stomach, and back.",1
An employee tripped and fell in the parking lot resulting in a fractured left arm.,1
"An employee was handling sheet metal and assembling ductwork in the shop. While handling sheet metal, the employee lost his balance and fell, striking his hip against the concrete floor. He had a tape measure in his pocket on the hip on which he fell. Ductwork that was being handled then fell on the employee. The employee was hospitalized with a broken hip.",1
"An employee was walking to deliver a parcel when he stepped in a puddle and slipped, falling on his right side. He fractured his right femur and was hospitalized for surgery.",1
An employee was unloading equipment from the back of the trailer when the equipment slipped and fell onto his left foot resulting in the amputation of a toe.,1
An employee was operating an aerial lift at the worksite. A vehicle struck the boom of the lift causing it to swing into a steel column and the operator was bounced around in the basket resulting in facial and internal injuries and a fractured arm.,1
"An employee was loading a cart with cases of water. The employee stepped onto a shelf to reach a case, then slipped and fell off that shelf. The employee suffered a compression fracture in the lower spine.",1
"An employee was installing a mixer with a coworker. His right hand was inside the pulley assembly, attempting to get the cable back on the pulley, when the up/down air lifter was actuated to relieve tension on the cable. The mixer then came down and amputated his right index fingertip between the knuckle and the nail.",0
"On May 2, 2017, at 3:00 PM an employee was repairing the brakes on a trailer. He released the jack and the trailer came down on his right hand resulting in a laceration. The employee was hospitalized for treatment.",1
An employee was cutting beef shank with a bandsaw when the blade amputated his right index finger and damaged his right middle finger.,1
"An employee was cleaning around the axle stacker machine. As he retrieved the cone used to mark the area he is cleaning, his right arm was caught in the running machine resulting in a forearm laceration.",1
An employee was working on an extruder when his glove became caught in the machine. The extruder then pulled his hand in and amputated a fingertip. The machine was not locked out at the time.,1
"An employee was getting out of a vehicle when a gust of wind blew the door shut on his finger, amputating the fingertip below the fingernail.",0
"An employee was removing a stack of metal blank material from the blank stacker on the press. The riser that the blanks sit on had moved off the rollers while the blanks were stacking, therefore, the material would not roll freely. The employee attempted to move the blank material down by hand. The original stack fell striking his left ring finger resulting in a fingertip amputation.",0
An employee was threading media through the rollers of the pleater machine and got his left hand caught between two rollers in the machine. The employee was hospitalized for a hand contusion.,1
The employee was walking down the concrete stairs for the day when she missed a step and fell down a few stairs onto the landing fracturing an ankle.,1
"An employee was attempting to help a coworker whose garbage truck was caught on low hanging cable/phone line wires. The wire was stuck under a panel on the top of the truck, so the employee attempted to free the wire by removing the panel. When he removed the panel, the wire swung backward and struck him, causing him to fall off the back of the truck. He landed on his right leg and fractured his femur, requiring hospitalization.",1
"An employee was loading ammunition rounds onto a tank when a round ignited and burned the employee's forearm, hand, and abdomen.",1
"On May 2, 2017, at 7:00 a.m., an employee was performing concrete work when he fell four floors through an opening in a core shaft and was injured, requiring hospitalization.",1
An employee was operating a scissor lift and pinched the left ring finger at the middle phalanges between the lift's guardrail and a steel angle support resulting in amputation.,0
"An employee was handling a manual propelled cart loaded with drywall when the cart turned out and the bundle of drywall struck the employee in the throat, requiring hospitalization.",1
An employee was standing on a mobile scaffold about 3 or 4 feet above the floor when the platform became partially unsecured and tilted. The employee lost his balance and fell into a stand. He was hospitalized with a puncture wound and possible internal injuries in the sternum/chest area.,1
"An employee had entered a confined space in a reactor when he slipped on catalyst support media. As he fell, catalyst support beams (fire brick stacks) weighing approximately 80 to 100 pounds also fell and struck his legs, fracturing his right ankle, right fibula, and left fibula.",1
An employee was reaching for items that spilled out of a box on a moving conveyor belt when two of the employee's fingers were caught and crushed in the belt. The two fingers had to be medically amputated.,0
"An employee's hand was caught between a pipe roller and a wire brush machine, smashing and partially amputating his right index fingertip.",0
"While spooling a winch, an employee's glove was caught on the winch cable, which pulled the employee's right middle finger into the winch and amputated it below the second knuckle.",1
An employee was using an end mill when it cut the employee's right index finger.,0
"An employee was walking on the roof when he fell 30 to 40 feet to the ground, suffering broken ribs, punctured lungs, and other injuries.",1
An employee was helping a chip saw operator clear the chip saw when he placed his right hand on the cutting head machine. The machine then amputated his right index fingertip without bone loss.,0
"An employee was lowering a billet to the floor level using a chain sling basket. A sway developed in the load, and the end of the billet (farthest from the employee) landed on the already staged billets. Slack then developed in the chain, and the billet shifted and slid off the staged billets. The end closest to the employee landed on his foot, crushing his big toe and second toe.",1
An employee fell while getting out of the cab of his refuse truck and hit his head on some rocks. The employee was hospitalized and suffered two lacerations to the back of his head.,1
An employee was removing debris from a roof and stepped into an uncovered 3' x 3' hole falling approximately 15 feet and injuring their back.,1
An employee was placing cucumbers into a food processor and partially amputated the right ring finger.,1
"An employee was building a shelf to put above a safe. He was using an electric table saw to cut wood for the shelf when the blade cut his hand, severing his left middle finger and partially severing his left index and ring fingers. His entire left middle finger and his left index and left ring fingertips were amputated.",1
An employee was dismounting a vehicle at a highway construction site when a semi-truck veered into the construction zone and struck the employee. The employee was hospitalized with cuts and lacerations.,1
"On 5/2/17, an employee slipped/tripped on a sidewalk suffering a broken ankle that required hospitalization.",1
An employee tripped and fell in the break room injuring the right knee.,1
"An employee was removing a security fence panel while trusses were being delivered to the job site nearby on a flatbed truck. The banding holding the trusses together broke, and the trusses slid off the truck and struck the employee's right ankle, breaking it.",1
A sanitation employee was splashed with corrosive chemicals while attempting to prime a chemical pump resulting in second degree burns.,1
"An employee was walking behind a truck at a jobsite when the truck backed up and struck the employee on his right side, breaking his right arm and ribs. He was hospitalized.",1
"An employee was servicing an aircraft with a janitorial truck. As the employee removed the flexible hose from the aircraft, the truck rolled backwards and pinned his right leg between the truck and a belt loader. His right leg was fractured.",1
"An employee was working in a trench when the dirt wall fell in the trench, pinning the employee between the dirt and a pipe. The employee suffered a fractured pelvis, fractured leg, and puncture wounds.",1
An employee suffered a fingertip amputation while operating an automotive lift.,0
An employee was helping to dig a shallow trench to bury a cable line when he started having muscle cramps. He was hospitalized for heat stress.,1
"On May 2, 2017, an employee was injured while transporting a patient. The employee was exiting an elevator with the patient on a bed. When the employee pulled on the footboard, it came off striking the employee in the head. The employee fell to the floor, again striking their head. The employee was hospitalized for a skull fracture and brain bleed.",1
An employee was putting away a shipment in a walk-in freezer. The employee slipped and fell. The employee was hospitalized for treatment of a broken ankle.,1
"An employee pulling a shipment pallet from a freight delivery truck, slipped and fell onto the truck lift resulting in fractured ribs.",1
"An employee was bringing a motor into an air handling plenum that had negative air pressure when the double doors suddenly closed, striking and breaking the employee's forearm.",1
An employee was working near a breaker panel when a possible arc flash occurred. The employee sustained first and second degree electrical burns to both hands.,1
"An employee was blasting a girder for a petroleum tank that was stationed on a trailer in a blasting booth. He slipped on grit that was on the surface of the girder and fell about 40 inches to the ground on his left side, breaking ribs and injuring his internal organs. He was hospitalized.",1
"An employee was running a mill machine when his glove was caught in the rollers, resulting in a right finger amputation.",1
An employee was using an industrial drill press when his glove became caught in the drill bit. The drill bit then amputated his left thumb.,0
"An employee was inspecting an excavation on his knees. When he tried to stand up, he slipped and fell 8 feet into the excavation, hitting his head on a pipe. He was hospitalized with a head injury.",1
"An employee was holding and moving a house cat when it bit her right index finger. Her finger and hand became swollen due to an infection, requiring hospitalization.",1
An employee was closing a cantilever pipe gate when the employee's left ring finger was crushed and amputated between the gate and the cradle it sits in when closed.,1
"An employee was walking toward the copy machine when she tripped and fell, injuring her right shoulder with a possible fracture.",1
"An employee tripped over a chain that was being used as a come along, fracturing the left femur.",1
"On May 3, 2017, at approximately 5:00 PM, an employee was moving steel on a ""V"" cart when the load shifted and partially amputated his right thumb.",1
"An employee fell from an elevated pallet rack to the concrete floor, suffering a cervical neck fracture and a back injury that required hospitalization.",1
"An employee was standing in the parking lot, talking to a customer, when he was struck by a golf cart. He suffered left body injuries, from his head to his toes.",1
"An employee was loading a catalyst into a reactor when the pipe containing the catalyst became clogged. He attempted to unclog it by making a horizontal cut in the pipe when it whipped around, striking him. He suffered a fractured scapula, six fractured ribs, and a T-12 spinal disc compression.",1
"An employee was unloading salt water from the truck-mounted storage tank. As the employee removed the pressurized tank cap, it struck him on the right side of his torso resulting in injuries to his ribs and liver (right side).",1
Two of an employee's right-hand fingers were amputated by a conveyor belt and pulley system. The system was unguarded at the time.,0
"An employee was on the second floor of a structure straightening rebar for an exterior block wall when the rebar snapped. The momentum caused the employee to fall 18 feet to the ground. He suffered fractured ribs, a punctured lung, and a lower back injury.",1
"An employee was clearing the pump to get the turbine ready for maintenance. While flushing the heavy coker gas oil (HCGO) pump, some HCGO got reintroduced into the pipe. When the hot oil (700 degrees) touched the water in the sewer drain, it flashed back and burned the employee. The employee suffered second degree burns to the abdomen and third degree burns to both hands and knees.",1
"While adjusting the direction of airflow in a pneumatic blower, an employee's hand came in contact with the outside of the metal blower. The metal casing of the blower and shed transferred static energy to the employee's hand and caused an electric shock.",1
"An employee was walking on a fifth floor precast beam between two columns when he fell off the edge and landed on the concrete fourth floor, injuring the left side of his face and his right thumb. He was hospitalized.",1
"An employee was climbing a ladder when it moved and he fell about 9 feet to the concrete floor, fracturing his right foot and requiring hospitalization.",1
An employee was using an impact wrench to repair an air brake when the employee's right hand thumb and second fingertip were caught and amputated by the wrench.,1
"An employee was struck by a private car while opening a gas valve on the road, suffering a broken collarbone and chin contusion.",1
"On May 3, 2017, an employee was walking and carrying equipment when he fell into depressed, uneven pavement. He broke his ribs and collarbone, injured his arm, and suffered a collapsed lung.",1
"An employee was trying to unhook a chain from a furnace lid that was stuck when the furnace operator pushed the lift button to the furnace lid and the chain caught the employee's left middle finger, amputating it.",0
An employee was opening the furnace and caught a finger in the chain and sprocket that controls the furnace door resulting in a right ring fingertip amputation.,0
"An employee was vacuuming steel grit using a 4"" vacuum hose when the employee's arm up to the bicep was suctioned into the hose. The employee suffered extensive swelling and required surgery.",1
An employee was standing on the second rung from the top of an 8-foot step ladder using a tape measurer to hang a picture when the ladder became unbalanced. The employee fell from the ladder and suffered a broken wrist.,1
"An employee walked into one of the rooms, slipped on a floor mat and fell fracturing her right ankle.",1
An employee was operating a front-end loader when it caught on fire. The employee jumped off the front-end loader and broke his tibia and fibula.,1
An employee was working on a table saw cutting parts for door manufacturing when the saw blade partially amputated the employee's left ring fingertip.,0
"An employee was climbing a storage racking system searching for inventory. When he was descending the racking system, a portion of his right ring finger was caught on a pallet due to a ring on his finger. He lost his footing and his right ring fingertip was amputated at the first knuckle.",1
An employee fell 15 feet off a scaffold and suffered a dislocated wrist.,1
An employee was training on how to operate a hydraulic piece of equipment when the employee's ring finger (left hand) was caught and partially amputated in the machine.,0
An employee was removing the expandable conveyor from storage and caught his right pinky finger in the conveyor belt resulting in a fingertip amputation.,0
"An employee was bringing down boxes when a pallet fell on his face, lacerating his nose and requiring hospitalization.",0
An employee was pulling a cart through the door that had an automatic closer and her left hand was caught in the door jam resulting in a middle fingertip amputation.,0
"While cleaning up metal and scrap debris, an employee dismounted his work truck and stepped on a piece of pipe connector, wedging his foot below a pallet. He fell and broke his leg in three places.",1
An employee fractured his left ring finger while working on a ladder.,1
"An employee was on a ladder nailing a piece of siding into place when the employee slipped off the ladder and fell approximately 23 feet to ground below, sustaining broken ribs, collapsed lungs, broken vertebrae, a pelvic fracture, and left arm nerve damage.",1
An employee sustained a back injury while pulling 11-pound containers off a conveyor belt and stacking them. The employee was hospitalized.,1
"An employee was walking across a roof deck when he fell approximately 20 feet through a soft spot in the roof deck to the floor below, breaking his wrist and cracking his pelvis.",1
"An employee was using a pedestal sander to sand down the edges on a piece of metal using an 80 grit disc. While he was pushing the metal into the sander, the metal buckled and his left hand went into the face of the disc, amputating his left index fingertip.",0
An employee was working from a scaffold installing plywood sheets to the side of a building. The employee suffered a seizure and fell off the scaffolding approximately 12 feet to the ground below. The employee suffered facial and back injuries.,1
"An employee was removing products that had fallen onto a reflector plate when a concrete matt log edger struck the employee's hand, crushing it. The employee required hospitalization and surgery.",1
"An employee was at a storage facility helping clients move an object out of the unit. The clients were using a forklift to move the object while the employee acted as spotter for the forklift. The forklift forks struck the employee and he fell back onto his head on the gravel. He suffered a broken jaw and contusion/cut on the top of his head, requiring hospitalization.",1
An employee was operating a forklift when he lost control of the lift and fell out of the compartment. The lift then ran over his foot and caused an open wound that required hospitalization.,1
"An employee was attempting to move a forklift out of a charging station area. As the forklift moved back out of the area, the employee was pinned between the roll cage of the lift and the storage rack frame, suffering fractured ribs and a fractured left collarbone.",1
"An employee was standing on a truck step, inspecting the bays before making deliveries for the day. When he finished looking in the bay, he grabbed the strap of the door with his left hand and dismounted the step while his right hand was on the truck deck. The bay door closed on his right hand, partially amputating his middle fingertip, including the entire nail.",0
"While performing physical conditioning and training to prepare for forest work conditions, an employee became ill and suffered muscle injury.",1
"An employee was attempting to clear a roof drain when he lost his footing and slid off the roof. He fell approximately 9 feet and landed on a picnic table below, breaking his right femur.",1
"An employee was climbing a vertical metal ladder. When he stepped over a bar, he hit the back of his head, which caused him to fall backwards 1 to 1.5 feet, landing on the ground. He suffered nerve pain, bilateral arm weakness, and a pinched nerved in his neck.",1
An employee suffered a pinky fingertip amputation.,0
An employee was talking to a teller in the teller station when she fell and broke her hip and pelvis.,1
"An employee was putting a strap around a steel beam when another beam shifted and fell on his right hand, fracturing his right wrist and breaking fingers.",1
"An employee was kneeling down to check an HVAC filter. When he stood up, he struck a pipe with his head and suffered a herniated disc.",1
"An employee was gutting a carcass when the knife cut his leg, requiring overnight hospitalization and surgery.",1
"An employee had delivered a package to a private residence when a dog ran out and chased him. While fleeing back to the truck, the employee fell into a ditch and fractured his left femur, requiring hospitalization and surgery.",1
"On 5/4/17, an employee was installing production equipment (conveyor) when the equipment fell 6 inches onto his left foot, breaking and lacerating it. He was hospitalized.",1
"An employee and coworker were attempting to replace an exterior panel on a cutting machine when the panel slipped and fell onto the injured employee's left middle finger, amputating the distal portion of the finger.",0
"An employee was escorting a patient back to her room. When they reached the room, the patient kicked the employee, fracturing her left hip.",1
"An employee was installing a 6"" threaded metal fitting to a mud unit. The fitting slipped and the employee's left middle fingertip was crushed and amputated between the fitting and the mud unit.",0
"An employee was at a commercial jobsite operating a skid steer. After spreading seed in the area, the employee was getting off the skid steer when his jacket became caught on the seat and he fell about 4 to 5 feet the ground. He fell on his left side, striking and breaking his left ankle against the track of the steer.",1
An employee was cutting a piece of lumber with a chop saw when the blade lacerated the top of his hand. The saw was guarded at the time.,1
"An employee was using a gasoline powered backpack blower when he started swaying and collapsed, requiring hospitalization.",1
"An employee was laying down pipe. His left hand was on the pipe elevator. When the elevator opened, it pinched his left ring finger. His left ring fingertip had to be surgically amputated.",0
"On May 4, 2017, an employee was stocking shelves when the employee tripped on the shopping cart containing products to be stocked. The employee fell to the ground and fractured the left hip, requiring hospitalization and surgery.",1
An employee was inspecting pipe and pinched his right middle finger between two oil field pipes rolling on the rack resulting in amputation.,1
An employee was repairing a damaged pallet racking and pinched the right index finger between the concrete floor and a metal plate resulting in amputation of the finger above the first knuckle.,0
 An employee suffered an amputation as a result of a workplace incident.,0
An employee suffered an amputation as a result of a workplace incident.,0
"An employee was providing security services at an event when he tripped on a sand bag after opening a gate and fell to the ground. He suffered lacerations to the hand and right thumb pain, requiring hospitalization.",1
"An employee was operating a table saw when the employee's finger contacted the saw blade, amputating the fingertip at the first knuckle.",0
"An employee was operating an electric triple pallet jack inside the freezer, selecting product cases, when the triple jack stopped working. Burning odor came out of the triple jack's motor brushes. The employee inhaled the smoke and fumes, which started burning his throat and lungs. He was hospitalized.",1
An employee was using a portable table saw to cut a board when his left thumb contacted the blade and the thumb tip was amputated. The saw was unguarded at the time.,0
An employee was sitting at a dining room table completing paperwork when a client stabbed her in the upper left shoulder with a steak knife. The knife penetrated her chest cavity wall and punctured her lung.,1
An employee was cleaning a press machine when the blade of a rotating wheel amputated his right index finger below the first distal knuckle and lacerated his right middle finger.,0
"An employee was helping to rig a pipe with a sling to lift it. During the lift, the employee's right middle finger was caught between the pipe and sling, amputating his fingertip.",0
"An employee was replacing a belt on a motor fan assembly when his right index finger was caught between the belt and the pulley, amputating the fingertip tip to the first knuckle. The belt was unguarded at the time.",0
"An employee had verified a patient's medication with a coworker at a computer when she turned to exit the room and tripped on a fetal monitor's cord. She fell to the floor, fracturing her left ankle and bruising her left wrist. She was hospitalized.",1
An employee received an electrical shock while conducting maintenance on equipment.,1
An employee was removing side panels from a flatbed truck when the employee's left ring finger was caught between a panel and the truck floor. The employee's finger suffered tendon damage and dislocated joints.,1
"An employee was un-jamming a machine while an air cylinder had residual air in it. The machine actuated, amputating the employee's right pinky fingertip.",0
"An employee was welding plates inside a culvert using a stick welder when the welder ignited his clothes. He suffered third degree burns to his chest, arms, hands, and head, requiring hospitalization. Fire-resistant clothes were not worn at the time.",1
"An employee was cleaning a C-line brush washer while standing on a platform when she fell from the platform, injuring her foot and wrist.",1
"An employee was sorting metals from non-ferrous material with a handheld magnet when his right thumb tip was crushed between the magnet and the metal wall of a bin, amputating part of his nail and soft tissue.",0
"On May 5, 2017, at 10:30 AM, an employee had a verbal exchange with another employee and experienced chest pains.",1
"On May 5, 2017, an employee was using a cutting torch to dismantle equipment when the employee's shirt caught on fire. The employee suffered first and second degree burns to the abdomen and was hospitalized.",1
"An employee fell off a rolling ladder and lost consciousness. The employee was hospitalized with broken ribs, a fractured pelvis, and head trauma.",1
"On May 6, 2017, an employee was attempting to restore power after a power outage. When he pushed the breaker button to reset it, he suffered an electrical shock and burns, requiring hospitalization.",1
"An employee fell while exiting the bathroom, suffering injuries to her tailbone and possibly head.",1
"The employee was working in a greenhouse. As he was bending down to pick up a flat of plants weighing approximately three pounds, he became dizzy and passed out. Heat may have been a factor, but the exact cause for the employee's illness is unknown.",1
An employee was clearing a piece of broken foam tray from a wrapper machine when the blade came up and severely lacerated the employee's right hand.,1
An employee was performing preventative maintenance on a machine and greasing a chain when a finger was caught in the machine's chain and sprocket resulting in partial amputation of the right thumb. The machine was not guarded at the time.,0
"An employee was working from an A-frame ladder when he lost his balance and fell to the floor, breaking his collarbone.",1
An employee was helping a customer load a purchased decorative windmill into the customer's vehicle when a metal windmill blade fell off of the windmill and lacerated the back of the employee's left ankle.,1
"An employee was attempting to attach a winch line onto a chute. As the line was being hoisted, the hook assembly amputated his right ring finger to the first knuckle.",1
An employee was struck in the shoulder by a casing pipe during a well completion operation. The employee then suffered a reaction to painkillers.,1
"An employee was walking across the wash bay approximately 20 feet away from where two coworkers were cleaning a crane when he slipped and fell, fracturing his femoral neck.",1
"An employee had just installed a paint mixing paddle onto a drill. He then picked up the drill with his right hand while he held the paddle with his left. He contacted the trigger, engaging the drill. The drill turned quickly, wrapping this left hand around the drill. His middle and ring fingers were amputated below the distal joint.",0
"An employee was off-loading water from a lake tank into the company tanker. While standing at the rear of the tanker, the employee stepped over a hose to check the process. As the employee's weight shifted, the rear (left) leg slipped in the mud and the employee fell, fracturing the left patella and requiring hospitalization.",1
"On May 6, 2017, an employee was rethreading a paper roll when the employee's right arm was caught at the rotating paper reel. The employee suffered fractures to the right arm, collarbone, and a few ribs, requiring hospitalization and surgery.",1
"An employee was setting up hoses and chains for a grout packer that was inserted into piping and a sewer manhole. While he was working in the manhole, the grout packer became stuck. As he reached down to release it, the packer took off down the line and lacerated the web area of his right hand between his index finger and thumb.",1
A transformer slid off a forklift's forks and landed on an employee's ankle. The employee sustained an open fracture and needed surgery.,1
"An employee was climbing a fixed ladder onto a railcar when he slipped from the top rung and fell to the rail deck, fracturing his ribs and shoulder.",1
An employee was walking away from the rubbish bin when he was struck by a forklift that was reversing. He broke his right tibia and fibula.,1
"An employee was transporting a food cart via an elevator. While the employee was exiting the elevator, the cart tipped over. The cart lacerated the employee's finger and fractured the employee's toes.",1
"An employee was attempting to fix a dozer that had a clogged fuel line. As he siphoned diesel through the fuel line to unclog it, he suffered lung inflammation.",1
An employee was lowering a steel beam onto cribbing with a gantry crane when the beam rolled on his leg and broke it.,1
"An employee strained his lumbar spine while moving boxes, requiring hospitalization.",1
"An employee was washing windows from a 6-foot step ladder when the employee fell from the ladder to the ground, fracturing the right ankle.",1
"While retrieving a rental car for a customer from the parking lot, an employee was struck by another employee-driven vehicle.",1
An employee was using a wrench to remove a fitting from a pipe when his pinky finger was caught and amputated between the pipe and the wrench.,0
An employee was involved in a fist fight with another employee and was hospitalized for a head injury.,1
"An employee was operating an electric pallet jack in a warehouse aisle. He was driving down the aisle attempting to pass a coworker on his left. His right foot was hanging off the platform of the pallet jack and was caught between the pallet jack and a steel building column, smashing his foot. He was hospitalized with two broken bones and lacerations on his right foot.",1
"On May 05, 2017, an employee was operating an electric pallet jack. He was traveling with the forks behind him and was standing on the left side of the platform on the pallet jack. When he approached a staged pallet of product, he turned his pallet jack to the left and made a full circle to get under the pallet of product. As he was positioning his forks under the pallets, he hit another pallet of product. His right ankle was pinned between his pallet jack and the pallet of product, peeling off the skin and requiring surgery.",1
An employee was erecting a garage wall when it fell back and struck him. He was hospitalized with a back injury.,1
An employee was removing filters in a blower's fan unit when the moving fan blade lacerated three fingertips and partially amputated the middle fingertip above the nail.,1
"An employee was walking to the cash register when she stepped behind a customer, tripped over a display, and fell to the ground, possibly fracturing her wrist.",1
An employee was helping an operator set up a pipe threading line. The employee was loosening a part on the pipe threading line when the set-up operator turned a switch on to move the pipe into a CNC machine. The CNC machine then amputated the employee's right index finger.,1
"On May 08, 2017, at approximately 4:15PM, an employee was firing bird deterrent pyrotechnics as part of the facility bird control program when a spark from the bird gun got into the pyrotechnics bag. The pyrotechnics ignited and caused burns to the left side of his body and arm. He was hospitalized.",1
"An employee in a manlift basket had just finished a painting job. He was wearing a harness and coming down with the manlift when he fell from the basket and struck it, breaking his pelvis.",1
"An employee was climbing a ladder when he missed the last step on the ladder and fell to the ground, breaking his hip.",1
"An employee was working on a second level mezzanine, loading materials onto a forklift, when the employee fell from the mezzanine to floor level, suffering a broken arm, pelvis, and ribs, as well as internal bleeding.",1
An employee was struck by an aircraft part that fell from a crane and broke his left leg.,1
"On May 08, 2017, an employee was operating a tractor while a coworker was operating a utility vehicle. At approximately 5:26 PM, the utility vehicle became stuck in a ditch. The employee came to hook up the tractor to the vehicle and pull it out when the tractor began to roll into the ditch. The employee was pinned between the utility vehicle and the tractor, suffering internal abdominal injuries that required surgery and hospitalization.",1
"An employee fell while descending a staircase, breaking her knee.",1
"An employee was operating a forklift and reaching out to move a pipe when the pipe fell and crushed the employee's right thumb, amputating it with no bone loss.",1
"An employee was testing the flow of oil and gas at a job site. When he shut off the light plant (generator), a spark occurred and ignited gas that was in the air. The gas tank exploded and the flames burned 30 percent of his body.",1
"While climbing a ladder to an acid gas/ammonia gas drum platform, an employee missed the second rung from the top of the ladder and fell approximately 7 feet. The employee suffered a fractured hip and lacerated elbow.",1
"An employee was adjusting airlines on a clean machine. As he was adjusting a belt, the belt came back and smashed his right wrist between the belt and the rail. He suffered a right wrist laceration and tendon damage.",1
"On May 8, 2017, an employee was driving an ATV along the side of the road, picking up trash. He was driving on an incline when he came to a stop and the ATV rolled over onto his lower leg, fracturing it. He was hospitalized.",1
"An employee was turning an elevated crane load (mill roll) by hand when his left hand was caught in the load. As he pulled his hand free, his left pinky finger suffered an avulsion. His fingertip had to be medically amputated.",0
"At 8:00 p.m., on 5/08/2017, an employee was working on a production line when he attempted to help another employee unjam a spin trimmer machine. While removing product from the machine, he came into contact with the heated knife blade, lacerating his left middle finger between the base of the hand and his first knuckle. He was hospitalized and had surgery.",1
"An employee was walking down an aisle toward a dock station. At the same time, a forklift operator turned left into the aisle and struck the employee from behind. The employee fell into the forklift, which ran over the employee's left foot, fracturing the foot and toes.",1
"An employee was measuring a cable when his left hand was pulled in between the cable and reel, pinching his left middle and ring fingers.",1
"While unloading a truck with steel pipes at a delivery site, an employee was struck in the head by a pipe.",1
"An employee was attempting to unjam a die casting machine. The employee's left hand was caught in the machine as it closed, crushing the left index finger, which had to be amputated.",1
"An employee was removing bearing caps from a skip hoist when the door slid and trapped his right foot between a brace and the door, amputating his big toe and possibly amputating the remaining four toes.",1
"An employee was walking in an aisle near a four-way intersection in a warehouse. While he was searching for product on the industrial storage racks, he stepped backward and into forklift traffic (four-way intersection). An electric-powered sit-down forklift ran over and fractured his left foot, requiring hospitalization.",1
An employee was on a ladder cutting I-beams. He cut one beam and a piece fell and hit the bottom of the ladder causing the ladder to kick out. The employee lost balance and fell resulting in two broken bones in his left wrist and a broken nose.,1
An employee was preparing a crane and was placing a hydraulic pin in a hole when the hydraulic engaged and pinched his fingers. His left middle and ring fingertips had to be surgically amputated.,0
"An employee was working in a 5.5-feet-deep trench when a portion of the trench gave way and struck the employee's shoulder, dislocating it.",1
An employee's hand was caught in a planer amputating his right thumb and index finger.,1
"On May 8, 2017, at approximately 11:15 a.m., an employee was attempting to unload cyanuric chloride when the material became airborne and covered the employee's respirator mask, obstructing his vision. In an attempt to clear the mask, it was rinsed with water. The cyanuric chloride reacted with the water and became acidic. He removed his mask and suffered eye and skin irritation as well as breathing difficulties. He was later hospitalized for a chemical burn to the lungs.",1
"On May 8, 2017, around 11:15 a.m., an employee had just finished cutting a 6-foot piece of aluminum with an alligator shear when a piece of the metal spun into the air and amputated the first knuckle of his left ring finger.",0
"On May 8, 2017, around 9:00 a.m., an employee was cutting tree limbs away from power lines. He was repositioning himself in the tree 45- to 60-feet high when the limb he was tied off to broke and he fell to the ground. He was hospitalized with a collapsed lung, pelvic injuries, and back injuries that required surgery.",1
An employee was helping a coworker and a nurse move a quadriplegic patient from a bed using the bed sheet when the patient fell on the employee. The employee suffered a herniated back disc and was hospitalized.,1
An employee was attempting to clear a jam from a guarded straw processor machine when a sharp turn piece on the machine caught and partially amputated his left index finger. The machine was not locked/tagged out at the time.,0
An employee was cutting fiber board with a table saw when the blade amputated his thumb. The saw was not equipped with a stop at the time.,0
"An employee had walked out of a store where he was doing a product reset when he was shot in the parking lot by unknown assailants. He suffered gun shot wounds to the right arm, back, and buttock.",1
"An employee was operating a pipe grooving machine to groove a steel pipe when his glove became caught and his hand was pulled in between the pipe and the back plate of the machine. His left middle, ring, and index fingers were partially amputated.",0
"An employee was attempting to lubricate the chain and sprocket on a conveyor motor when he noticed dust and dirt behind the sprocket on the guard case. He wrapped a rag around his finger to wipe off the dirt. The rag and his right index finger were pulled into the sprocket, amputating his fingertip (no bone loss).",0
"An employee was walking up a slope carrying a ladder when he rolled his foot and broke his ankle, requiring overnight hospitalization and surgery.",1
An employee was breaking a horse in a training corral when the horse bucked the employee to the ground. He injured his back and ribs and was hospitalized.,1
"An employee was servicing an air conditioning unit from an extension ladder that was leaned against a building while a coworker was holding the bottom of the ladder. The coworker released the ladder and walked away to retrieve a part. The ladder then slid out and the employee fell 13 feet, breaking his foot.",1
"An employee was running rods in a hole when the rod transfer cable failed, allowing the rod to move uncontrollably. It struck the employee on the left side of the neck and cranium. He lost consciousness and suffered blood clots, requiring hospitalization.",1
An employee slipped and fell on a wet floor and fractured her right femur.,1
An employee was walking at a site and fell resulting in a head laceration and hospitalization.,1
"On May 9, 2017, an employee was attempting to cover a wall with fiberglass because of impending rain when the wall fractured two of the employee's fingers.",1
An employee fell and broke her hip while walking down an aisle.,1
"An employee was banding the coil on a recoiling machine when the coil came off of the track during the recoiling stage. The employee made some adjustments so the coil would line up correctly. A coworker then placed the separator down and used the manual control panel to finish the recoiling process. At that time, the employee's glove was caught between the lapse of the coil and was crushed by the separator, causing an amputation of the left ring finger.",0
"An employee was attempting to get into the driver's seat of a pickup truck that had a suspension lift kit installed on it. This kit raised the normal height of the doors above street level. The employee was holding onto the steering wheel to hoist himself up into the drivers' seat when he lost his grip on the steering wheel, fell backwards to the pavement, and landed on his back. He was hospitalized with a back injury and had surgery.",1
"On May 9, 2017, an employee was standing at the rear door on a vacuum suction tank when the employee was caught and pinned between the hydraulic-actuated closing door, suffering a crushed midsection and chest.",1
"On May 9, 2017, an employee was attempting to remove a piece of meat material from a chain drive guard when his left index fingertip was caught and amputated in the chain drive.",0
An employee was attempting to unload 4x4 posts from the forks of a forklift when the posts broke the employee's leg.,1
"An employee was helping to load a trailer with freight when the employee fell 5 feet off the freight to the ground, suffering broken ribs and a broken left shoulder.",1
An employee was using a safety knife or a box cutter to cut rolls of film that were coming out of a machine when the blade amputated his left middle fingertip (skin only).,0
"An employee was cutting a piece of wood on a table saw when the piece of wood kicked back. As the employee tried to catch the piece of wood, the saw blade cut his left hand, amputating his second, third, and fourth fingertips.",1
"An employee was chasing undocumented aliens through rough mountain terrain when he fell from a height and landed on his back. He suffered a T-8 compression fracture, broken rib, and contusions.",1
"An employee was performing pipe fabrication work on a 20-foot, 12-inch diameter steel pipe that was situated on a pipe rolling rack. The pipe rolled about 18 inches off the pipe rack and struck his left leg, fracturing it below the left knee.",1
An employee was checking if there was enough clearance between an excavator and a fence when the excavator operator tried to move the excavator tracks. The excavator bucket moved instead and struck the employee against a trench box. He suffered fractured ribs.,1
"An employee was carrying a stack of glasses when one of the glasses broke, lacerating the palm of his right hand and requiring hospitalization.",1
"On May 09, 2017, an employee had dismounted a tugger and was hooking carts onto it when a second tugger passed by. The second tugger's carts broke loose and struck the employee. The employee was knocked to the ground and suffered a laceration on the right foot and a fracture to the right knee.",1
"An employee was cutting meat with a band saw when his right index finger contacted the blade, amputating his fingertip above the knuckle.",0
"An employee was cutting metal pieces in a shear that is operated with a foot control. While he was leaning forward to adjust a piece with his hand, his foot pushed down on the foot control and activated the shear, which then amputated his right middle fingertip.",0
"An employee was performing duct work from a ladder when he lost his balance and fell about 4 feet to the ground, breaking his wrist and collarbone.",1
An employee was using a chemical cleaner to clear a restroom drain when he began coughing and having trouble breathing. He was hospitalized with a burned esophagus and lungs and respiratory distress.,1
An employee was participating in a flow back operation when a sand separator tipped and fell onto the employee. The employee was hospitalized with a broken femur and a broken hip.,1
"An employee saw that the engine on his vehicle was running hot. He was adding fluids to the vehicle when the radiator cap blew off. Hot antifreeze spewed on him, burning his lower arm, chest, and abdomen. He was hospitalized overnight.",1
An employee was connecting a tow bar to an aircraft when the tow bar fell and hit him on his left big toe and adjacent toe.,1
"An employee was helping a forklift operator to move a granite slab with the forklift and an attachment clamp. The forklift operator put the forklift in neutral and got off of it. The forklift rolled forward and ran over the employee's ankle, breaking it.",1
An employee was operating a 9-inch grinder when it slipped out of his hands and lacerated his left leg above the knee.,1
"An employee and a coworker were moving a dolly that was loaded with metal sheets. The dolly tipped over and struck the employee's left foot, requiring hospitalization and surgery.",1
"An employee was pulling a bundle of cardboard when the band strap broke and he fell to the ground, breaking his left wrist. He was hospitalized and had surgery.",1
An employee was charging an A/C unit when Freon gases escaped from the machine and sprayed the employee's right hand. The employee was hospitalized with right hand burns.,1
"An employee was moving a large heavy mold when his left pinky finger was caught between the mold he was pushing and another stationary mold. His finger was severely crushed and lacerated, requiring surgery.",1
"While attempting to restore power to a downed pole, an employee came in contact with a 14,400-volt powerline, suffering an electric shock and burns.",1
"An employee tripped and fell while walking and talking, fracturing the right humerus at the shoulder.",1
"An employee was walking around a corner when her left foot caught on something and she fell on a hard object, fracturing her left hip.",1
An employee amputated his left index finger while cutting meat on a band saw.,1
"An employee was elevated in a scissor lift, attempting to remove straps from a section of wall that was being lifted by a forklift. The forklift backed up while the straps were still connected and pulled the wall onto the employee in the scissor lift. The employee suffered a broken hip and ankle.",1
"An employee was on a ladder, removing a vice grip from a garage door to open it. When the vice grip came off, the door rolled open and knocked him off the ladder. His right thumb was pinched and amputated between the door and the track.",0
"An employee was attempting to remove dried lead paste from a paddle at the outlet of a hopper when his glove became caught on a sprocket or drive chain on the hopper. His right middle finger was pulled approximately 1/2 inch into the chain, amputating it at the first knuckle. The chain was unguarded at the time.",0
"An employee was feeding sheet metal into a beader machine when his glove was caught in the roller, partially amputating his left index and middle fingertips. The machine was unguarded at the time.",1
"An employee was descending an extension ladder when he lost his balance and fell 8 feet to the brick patio floor. He fell on his side, fracturing six ribs and bruising his lower back.",1
An employee was driving an open cab tractor when a tree limb lacerated his cheek. The scratch later became severely infected and required hospitalization the following day.,1
"An employee was moving a steel panel when the panel fell and hit him on the left forearm. The steel panel cut into his skin, muscle, and tendon. He was hospitalized and had surgery.",1
An employee's left big toe was crushed and fractured when a pallet slid off the forks of a forklift and landed on the employee's foot. The employee had surgery and was hospitalized overnight.,1
"An employee was nailing felt paper on a deck when the felt paper moved, causing him to lose balance while holding the nail gun in his right hand. A nail then ejected and punctured his left middle finger. He was hospitalized.",1
"An employee was checking the back of a tractor-trailer for obstructions. The tractor-trailer driver lost sight of the employee while backing up and struck him. He suffered a broken leg, two broken ribs, and a road rash injury to the scalp.",1
"An employee was re-erecting goal posts below a power line when the stringer of flags on one end of the goal posts became hung up on the passenger-side rear-view mirror of a haul truck. The injured employee was attempting to free the stringer of flags when a coworker raised a PVC pipe to place it over a t-post. The top of the PVC pole, where the stringer of flags was tied, came into contact with the overhead power line. The employee sustained burns to his left arm, left hand, and right foot. He was hospitalized for surgery.",1
"An employee was holding a davit arm base that weighed approximately 25 pounds. As he turned, he felt pain in the lower back area due to a back sprain/strain.",1
"An employee was walking on the sidewalk, twisted a foot and fell breaking a hip.",1
"An employee was cleaning a table at the home of a patient. When she bent over, she felt a very sharp pain in her back. She was hospitalized with a pinched nerve in her lower back.",1
An employee suffered an amputation while working on a press machine.,0
"On May 10, 2017, at 7:30 a.m., an employee was using a hand crank to dolly up a trailer when the employee's hand slipped off the crank, which then swung around and struck the employee's right eye. The employee suffered right eye trauma.",1
"While using a tag line to move a pipe, an employee lost control of the tag line. The employee's right arm was then caught between the pipe and a drilling rig, breaking it.",1
"On May 10, 2017, an employee was removing pins and bolts from a roller when the roller opened up and moved, pinning the employee between the bench and the open roller. The employee suffered a smashed leg and shoulder.",1
"An employee was conducting framing activities for a residential home when he lost his footing and fell approximately 24 feet from the roof to the ground, breaking his wrist and ankles.",1
"An employee was manually feeding a 6' piece of 2x10 lumber into a rip saw when a piece of the lumber became caught in the saw and kicked back through the machine, striking and puncturing the employee's right forearm.",1
"An employee had removed a loading dock plate when he fell into the gap between the truck and loading dock, fracturing his left femur.",1
An employee was bitten by a spider while sitting at a desk and was hospitalized.,1
"An employee transported a sofa on a four-wheeled cart to a container truck and unloaded it at the rear of the container. He then positioned himself in front of the sofa to push it farther into the truck when the cart, which was set on a slight ramp, rolled into the back of his left leg. He lifted his leg rapidly and it hit the bottom of the cart. He suffered a laceration to the back of his lower left leg and tendon.",1
"An employee opened the door to go outside and tripped over a water hose. She fell and struck her head, requiring hospitalization.",1
"While walking, an employee tripped and fell fracturing a hip.",1
"An employee was working on a pneumatic nut runner (air ratchet) equipped with a long extension to bolt seat rails to a bus. The employee was wearing gloves at the time. She was holding the air ratchet overhead with her left hand near the rotating ratchet head when the ratchet head and extension caught her glove, wrapping it around her left pinky and partially de-gloving it. Her left pinky finger had to be partially amputated.",1
"An employee was helping a coworker with a kelly belt when a 48-inch steel pipe wrench kicked back and struck the employee, fracturing the employee's left forearm.",1
"An employee was trying to move a trailer off the assembly line with help from coworkers. The trailer slid sideways and fell off its dolly. When the trailer hit the floor, the open tilt deck slammed shut onto the injured employee's left hand, severely lacerating it.",1
"A temporary employee was troubleshooting a pressure washer when his fingers became caught in the tool, amputating his right index finger at the first joint.",1
"An employee was pressing discs onto a roller using a hydraulic press when a steel plate in the press sheared its retaining bolts and the steel plate was expelled, striking the employee in the mid-section. The employee was hospitalized due to a slight tear to the liver, a torn groin muscle, and a laceration to the rear of the head requiring five staples.",1
"An employee and a coworker were installing sheet rock while standing on a bakers scaffold that was approximately 7 feet tall. The employee needed to reach higher so he was also using a step ladder on the bakers scaffold. His coworker climbed down off of the scaffolding and the scaffolding began to roll. The employee was on the scaffolding standing on the step ladder as it was rolling. The scaffolding tipped over onto its side, and the employee fell approximately 8 feet to the concrete floor, suffering a broken wrist, foot, and skull.",1
"An employee slipped and fell in the restroom, fracturing a leg.",1
"An employee was shaving palm trees below the roof when a roll of roofing paper fell off and onto the employee's head and back, causing contusions to both.",1
An employee was helping to unload a truck and shortly thereafter suffered chest pains.,1
"An employee was sitting in a chair and leaned back to look down the hallway. When she turned her head, she felt a pop, as well as numbness and tingling in her right arm and hand. She was hospitalized.",1
An employee's fingertip was caught and amputated between a roller and an aluminum extrusion.,0
"An employee was standing in his designated area while waiting for a powered industrial truck to load his truck. The powered industrial truck then struck the employee, crushing both of his feet.",1
"An employee was brushing metal shavings out of a seamer when a metal sliver punctured his right hand. He later experienced hot/cold flashes, nausea, swelling in his right palm, and numbness in his right arm due to blood poisoning, requiring hospitalization.",1
"While operating a forklift, an employee lost control of the forklift and it tipped over, crushing the employee's foot and hand. The employee suffered a broken finger and had to have multiple toes amputated.",1
An employee suffered a fingertip amputation.,0
"An employee contacted a metal hose clamp while working on a waste water pump, suffering a laceration and infection that required hospitalization the following day.",1
An employee was unclogging an airlock machine when her glove was caught in the machine. Her right ring and pinky fingers were then amputated at the first knuckle.,0
"On May 11, 2017, an employee was attempting to feed wire mesh through a wall and into a building. The employee's left hand was pulled into the rotating pinch rollers, which amputated the index finger.",0
"An employee was waiting for a bundle saw to complete its sawing cycle when the employee's left middle finger was caught between two pieces of steel, amputating the fingertip.",1
"An employee was bending over to paint the bottom of a pipe when another piece kicked over behind him and struck his left shoulder. He was pushed into the pipe he was painting, making contact in the center of his chest. He was hospitalized with a contusion to the left shoulder (back), contusion to the front of the chest, and laceration to the chin.",1
"A security guard was assaulted by a person on a train, suffering a broken jaw and requiring hospitalization.",1
"While lubricating a loader, an employee lost balance and fell 3.5 feet to the ground, breaking the right leg.",1
"An employee was working on a production line when the palletizer jammed. While attempting to clear the jam, the employee was pinned between pails and the moving equipment. A coworker stopped the machine and the employee fell out onto the rollers, sustaining left rib fractures and a punctured lung. The machine was not turned off at the time of the incident.",1
"On 5/11/17, an employee fell from a step ladder to the concrete floor of a new home under construction, suffering a head injury and broken wrist.",1
"An employee was traveling down an aisle in the warehouse when the forklift he was operating veered and struck a support column. His leg became pinned between the body of the forklift and the support column. He sustained multiple fractures to his lower left leg, which was amputated below the knee.",0
"An employee noticed that a shaver box was making a strange noise and called a coworker for assistance. After the coworker identified that the noise was being caused by a piece of wood that was hung up in the shaver box, he pressed the stop button to initiate the shutdown process. While the employee was attempting to remove the piece of wood, his foot was on the chain of the shaver box. The chain was still coasting to a stop and pulled the employee's right foot into the drive sprocket. He suffered a hole in the top of his foot, a crushed fourth toe, and a deeply lacerated pinky toe. His right fourth toe had to be surgically amputated.",0
"An employee slipped and fell on a film of fat on the platform floor, fracturing the right femur.",1
"An employee was MIG welding when a spark ignited his shirt. He suffered second and third degree burns to the upper portion of his body, both arms, his neck, and the lower portion of his head. He was hospitalized.",1
"An employee was escorting a patron in the elevator. The elevator was called back to the first floor, but the doors malfunctioned and remained open at the second floor. The employee stepped into the open elevator shaft and fell approximately 10 feet, suffering a fractured kneecap.",1
"A well-servicing rig crew was tripping pipe out of a hole when the safety pin on the tongs (torqueing device) broke, allowing the tongs to strike an employee and knock him off the work platform. He fell 10 feet, fracturing his ribs and back and lacerated his liver.",1
An employee was attempting to clear a jam in a filling machine when the machine amputated the employee's left middle fingertip.,0
"An employee fell from an unfinished stairwell platform, hit his head on a wall on the way down, and then landed on the concrete floor 10 to 15 feet below. He suffered bleeding in the brain, a broken bone in the neck, and a broken bone in the chest.",1
An employee was on foot patrol along the US border and was bitten by an unknown insect resulting in redness and swelling.,1
An employee was using a towel to clean water drops off a press ink ball when the loose end of the towel was drawn into the press. The employee's finger was also drawn in and amputated.,1
An employee was working on the second level of a scaffold approximately eight feet high. The employee was reaching up to adjust the toe board for the level above when he slipped and fell through the mid-rail to the ground below. The employee suffered a left shoulder and elbow injury and a laceration above the left eye requiring stitches.,1
An employee was unloading materials from a box truck when the vehicle rolled backwards and struck the employee. The employee suffered a fractured femur and was hospitalized.,1
"An employee was adjusting a lower deflector trough. As he pulled his hand away and across his body, his right index fingertip was pinched in a baffle. The force of the pinch amputated his fingertip. He was wearing gloves at the time of the incident.",0
"An employee was guiding horses through a gate and into a corral for mane shaving when a horse pulled on its halter, causing the employee's left hand to become trapped between the stock and gate. The employee suffered a broken left thumb.",1
"An employee was exiting the cab of a bulldozer. The employee slipped on the track while stepping down. The employee's lower left leg became lodged between the track and the bulldozer's blade, fracturing the tibia, fibula, and patella. The employee was hospitalized for surgery.",1
"An employee had been at work since 7:00 a.m., unpacking boxes and building furniture on the dock, when he felt dizzy and collapsed. He was hospitalized for dehydration.",1
"On May 11, 2017, an employee was guiding a generator that was being lowered to the ground by a crane. At approximately 9:45 a.m., the employee used his right hand to hit the headache ball of the crane to unhook it from the generator. The ball dropped suddenly, pinching his right pinky finger between the headache ball and the hook. Half of his finger had to be surgically amputated.",0
"An employee fell from a ladder while installing a flex duct. On the way down, he put his hand out to brace himself and his right hand came into contact with a metal RC channel, cutting three fingers.",1
"An employee was cutting a short loin of beef using a band saw when the table stopped abruptly.  The employee's right middle finger then contacted the blade, amputating the fingertip (no bone loss).",0
"An employee tripped over a table and fell, fracturing both of her kneecaps.",1
"An employee was cutting lab samples with a utility band saw when his glove was caught on a blade and his hand was pulled into the blade, cutting his left palm from the little finger to almost under the index finger.",1
An employee was attempting to dislodge an obstruction in the powdered lubricant applicator unit of tire bead fabrication equipment when his right ring fingertip was amputated by a chain and sprocket.,0
"An employee was starting a lawn mower when he fell down and the mower ran over his right leg, lacerating it and requiring hospitalization.",1
"An employee's glove was caught between a part and a hydraulic roller table, smashing and amputating his left index fingertip.",0
"Workers were using a mobile crane to lift several 60-foot sections of 4-inch coiled rubber hose when one end of one of the coils caught the single coil that was being lifted. Once the coil rigged to the load line was approximately 10 feet above the ground, the end of the coil that had attached itself to the coil being lifted came free, rolled back, and struck the head of an employee on the ground. He suffered a 2-inch scalp laceration and numbness in his right arm.",1
"An employee was attempting to unload a trailer when a pallet of corrugated material (400 pounds) fell from the trailer and struck his lower right ankle, fracturing it.",1
"An employee tripped and fell while wheeling an appliance out of a trailer, suffering a back compression fracture.",1
An employee was in a ditch assisting with setting a water pipe. A pipe attached to machinery with a chain struck the employee's leg when the equipment was moved. The employee suffered a fracture under the knee cap that required surgery.,1
An employee was removing a transmission from a car when the transmission fell onto the employee's left foot causing a crushing injury. Infection resulted in hospitalization and amputation.,1
An employee was feeding a sander's out feed when his third left finger was caught and amputated between two wooden components.,1
"An employee was cleaning the rollers of a sugar packet sealing machine with a rag when the rag and her hand were pulled between the rollers, lacerating and fracturing her right middle finger.",1
"An employee was running a service line to the residence. The ladder shifted as he was climbing it, causing him to fall approximately 10 feet to the ground. The employee sustained a broken left wrist requiring surgery to repair and lacerations to the face and right arm.",1
An employee was power-washing a lift when the power-washer spray punctured the employee's left middle finger. The puncture became infected and required surgery.,1
"While installing a catwalk on top of a grain elevator, an employee fell approximately 15 feet through an opening in a platform to a lower level, suffering a broken ankle and requiring surgery.",1
"At approximately 4:30 a.m., on May 12, 2017, an employee was operating an extrusion line when the film caused the sheet to become stuck at the center trim saw. He went under the line and pushed the sheet up to free it. When he did this, the force of the sheet pulled his hand toward the saw, which amputated his ring and middle fingertips.",1
An employee was moving stressing jacks from one steel cable to another to pre-stress the steel cables before pouring the concrete beam around them when his right index and middle fingers entered the path of the stressing jack and were partially amputated.,1
"An employee and a coworker were operating a saw with dual palm buttons. The employee was on the left side holding a 2 x 4 wooden board to be cut toward the back stop on the machine. The coworker was on the right side and actuated the palm buttons while the employee's left thumb was in the point of operation. When the blade came up, it amputated approximately 1/4"" of the employee's left thumb tip. The saw was unguarded at the time.",0
"An employee was working on a machine when the yoke activated and caught four right-hand fingers, partially amputating them.",1
"Two employees were changing out the skid steer attachment from a bucket to forks. The bucket did not fall free when the two retaining pins were removed due to the build up of dirt. The bucket was still lifted about six inches above the ground. The injured employee was standing near the bucket with his left hand resting on it, while another employee used a hammer on the opposite side to knock the dirt loose. The bucket fell approximately six inches and the injured employee's left hand was pinched between the bucket and fixed supports resulting in amputation of the middle and ring fingertips.",0
"An employee was pulling mail containers toward a truck trailer when the employee walked backwards off the loading dock, hitting the concrete and suffering a head injury.",1
"A temporary employee was walking down a hill and mowing the lawn when he slipped and fell with the mower. He stopped but the mower kept going and ran over his right foot, amputating his middle toe and cutting the two adjacent toes.",1
"An employee was using a string trimmer while standing on an uphill incline when he lost footing as a mower approached from behind. His foot slid backwards and into the path of the mower deck, which severed his Achilles tendon and ligaments and broke bones in his lower leg. A mulching block-off plate was not in place on the mower's discharge opening and pulley guards were not installed at the time of the incident.",1
An employee was cleaning a pillow fiber filling machine when his right index finger was caught and amputated in the machine's drum.,0
An employee was spinning a tire mounted on a car when the employee's fingertip was caught and amputated between the brake rotor and wheel.,0
An employee was providing resident care (diaper changing) when she felt a muscle spasm in her upper left back. She was hospitalized.,1
An employee was removing a street light when the base kicked back and struck the employee in the stomach area.,1
An employee was using a step ladder to retrieve a container from shelving when he fell to the floor and fractured his right ankle.,1
"An employee was working on an electrical box while on a ladder when he passed out, fell 4 feet from the ladder, and hit his head on the concrete. He suffered a head injury, broken clavicle, and two broken ribs. He was hospitalized and had surgery.",1
An employee was welding pipes when his left index and middle finger were caught and amputated in a pipe clamp.,0
"On Friday, May 12, 2017, at approximately 10:00 p.m., an employee of the restaurant was walking out of the manager's office when his right little finger was caught in the doorframe on the hinge side, amputating the soft tissue of the right little fingertip.",0
The employee was lowering planks down to another employee from approximately 10 feet high on a mast climber scaffold. The employee fell and injured his back and ribs.,1
An employee was cleaning a granulator when it amputated his left index fingertip.,0
"An employee was cutting a piece of duct work to size using a grinder with a cut-off wheel. The pipe was staged on the back of a truck parked approximately 5 feet from two manhole covers. As the employee was cutting, vapors from an underground tank beneath the manhole covers ignited, causing first degree flash burns to the employee's torso, chest, hands, arms, head, face, neck, and back and second degree burns to the chest and hands.",1
An employee's left foot was caught and fractured between the forks brace and step of a skid steer. His big toe was also severely dislocated.,1
 An employee tripped and fell down a flight of stairs while engaged in construction operations. The employee sustained a mild concussion and was subsequently hospitalized for treatment.,1
An employee was sliding a section of grating into place and crushed his left middle finger between the grating and horizontal support steel member underneath resulting in a fingertip amputation.,0
The employee had been planting crops with a planting machine. The employee's hands were in the planting mechanism when it hydraulically lifted and caught his fingers resulting in amputation of the right index fingertip.,0
"An employee was operating a stand-up forklift when he lost control of it while turning right. His right hand was then caught and fractured between the forklift and an upright rack, requiring hospitalization.",1
"An employee was moving a pallet jack when it hit and broke his ankle, requiring hospitalization.",1
"An employee was moving a cart filled with cardboard to a dumpster. As he lifted the cart, it slid and fell into the dumpster. When he pulled his hand away, his left hand was caught on the cart front pivot bar and the side of the dumpster, de-gloving his middle fingertip.",1
"On Saturday, May 13, 2017, at approximately 10:45 AM, an employee was slicing meat using a meat slicer. She placed her right hand on the slicer hold-down knob but her right thumb moved to the side of the hold-down/guard. As she proceeded to slice the lunch meat, her right thumb contacted the blade, amputating the thumb tip.",0
"An employee was using a pedestal grinder to grind a work piece when his thumb was caught between the work piece and the grinding wheel, avulsing his thumbnail and the tissue below the nail.",1
An employee was attempting to inflate a tire on a trailer when the tire and rim exploded. The employee suffered a broken arm and was hospitalized for surgery.,1
"An employee slipped and fell on a sidewalk grate, fracturing his left ankle.",1
"An employee was cutting concrete with a hydraulic saw when the saw kicked back, slipped from his hands, and lacerated his left bicep.",1
An employee was manually moving yarn stuck in the texturizer on the extrusion line. The machine was turned back on and amputated the left index fingertip.,1
"An employee was adjusting the clutch of a cake depositor when his left hand slipped and his left middle finger contacted the moving chain, amputating the fingertip.",1
"An employee was working in the server pantry in the kitchen when her foot stuck to the non-slip floor and she fell, breaking her hip.",1
"An employee was dropping a pallet of product off at a loading dock using a powered pallet jack when he backed up into a rack. His hand was caught between the rack and the pallet jack's handle, fracturing and cutting his left thumb.",1
An employee was retrieving a wrench from his company truck. A water hauler truck (18 wheeler) reversed into the employee's pick-up truck. The employee's leg was caught in the door jam as he jumped into the truck resulting in a lower leg fracture.,1
An employee was working in the field and contracted the flu and typhus.,1
"An employee was climbing a ladder to check an aerial internet terminal. The ladder was against a telephone pole and the employee was on his way up to tie a safety strap around the pole and top of the ladder. The ladder slipped when the employee was more than halfway up, causing him and the ladder to fall to the ground. He suffered a broken right leg just above the ankle.",1
"An employee was utilizing a step stool to stock shelves, lost balance and fell striking his head on a shelf. The employee injured their head and shoulder.",1
An employee was working on a cutting machine when her left index fingertip was amputated.,0
An employee was helping to sandblast an underground pipe with a hose and sandblasting wand when the wand pointed at his arm and released sandblasting material under high pressure. He suffered a serious arm abrasion.,1
An employee was attempting to retrieve a piece of wood while working at an edger machine when his pinky finger contacted the trim saw blade and was amputated.,0
An employee was helping to unload a truck at the stock room doors outside when she collapsed due to heat-related syncope and required hospitalization.,1
"An employee was ascending a portable ladder/platform system. The employee got to the top of the platform system and fell through the opening that would normally go over the man-hole of a tractor trailer, suffering a fractured heel and tibia.",1
"An employee was securing a cabinet to the wall. He had one foot on a ladder and the other on a shelf so he could reach the top of the new cabinet. The shelf anchor failed, causing the cabinet and employee to fall approximately 42 inches. He suffered contusions to the right flank, a right rib fracture, and hip pain and needed right arm stitches.",1
An employee was marshaling a vehicle into a repair bay when the vehicle struck an alignment machine. The machine fell onto the employee and sprained his knee.,1
An employee was being trained on how to operate a shear machine when the shear caught and amputated his left middle fingertip and nail.,1
"An employee was holding the material feed pendant while removing a part from the press. As the material was fed into the press, the employee's left index fingertip was amputated.",0
"An employee was sorting metal pipes on a recycling line. When he discarded a section of pipe into a bunker, the pipe rebounded and struck his left index finger, resulting in a severe laceration.",1
An employee was placing a 12-inch elevator on a column pipe when the elevator opened unexpectedly and crushed the employee's right index finger in a pinch point. The employee's finger was also lacerated.,1
"An employee was stepping off a 2-foot-high truck bumper when his knee gave out and he fell to the ground, breaking his right ankle.",1
"On May 15, 2017, an employee was attempting to change hoses on machinery when his fingers were caught and amputated in an unguarded moving chain and sprocket.",0
"An employee was helping a coworker set a dock plate. The coworker went to pull the rear dock plate spring as the employee was pulling the front spring. The dock plate sprung up and the employee's right ring finger was caught in the pinch point between the dock plate and the plate flap, amputating the finger below the first knuckle.",0
"An employee flipped an LBX roof with a ceramic cam magnet attached to a hoist. The employee moved the magnet release handle, which operated a roller cam to release the magnet, then grabbed the opposite side to pull the magnet away. The magnet release handle switched back, engaging the magnet, which pinched and amputated the employee's right ring fingertip.",1
An employee was disassembling a racking system and stacking the racks when a rack shifted and the racks fell on the employee's leg fracturing it.,1
An employee was spotting for a tractor and trailer when he became trapped between the trailer and a piece of stationary equipment. His pelvis was crushed and he required hospitalization.,1
"An employee was attempting to start a chainsaw while in a tree when the employee's gear gave way and the employee fell 15 to 20 feet to the ground, fracturing the third vertebra and requiring hospitalization.",1
An employee was cleaning a cooling coil on a rooftop HVAC unit. He removed a panel to the unit to wash the coil from the inside out. His left hand was inside the unit when the fan blade struck and amputated his left index finger and lacerated his middle finger.,0
"An employee was feeding plastic film through a vacuum packing machine when it jammed. As the employee was trying to clear the jam, the machine's cutting blade amputated the employee's right index fingertip.",1
An employee was standing on a truck platform and was in the process of turning around to step down when he fell onto the gravel/rock. The employee sustained a broken right wrist and facial lacerations.,1
"An employee was using a forklift to move pallets from the warehouse to the back side of the building when the forklift struck the building's gas shut-off valve, igniting the battery and starting a fire. The employee suffered second degree burns to both arms and first degree burns to the face and forehead.",1
"An employee climbed a portable extension ladder (approximately 14 feet) to inspect and photograph a water line valve. The ladder slipped and fell, causing the employee to hit the concrete floor below. The employee suffered a broken left wrist and shoulder blade, a sprained or broken left ankle, and a nose injury.",1
"An employee was preparing a pallet of garbage for disposal near the loading dock when the employee's right foot was caught between the pallet and a forklift, lacerating it and requiring hospitalization.",1
"An employee was removing the tie-down straps from a slab lift clamp that was on a trailer when a forklift hit the top of the clamp on the opposite side, causing the clamp to roll off the trailer and strike the employee's left leg. His left leg broke above the ankle.",1
An employee was adjusting the cutting height of a 21-inch push mower when the blade lacerated and amputated two of the employee's fingers.,0
"An employee was removing tiles from a loader when a pallet of tiles fell off a forklift and struck the employee's right knee, fracturing the kneecap. The employee was hospitalized.",1
An employee was attempting to replace the lift gate on a 53-foot trailer. He removed two tall yellow jacks and then hit the pin in the lift gate cylinder. The gate fell on him and he was pinned in the squatting position with the lift gate on top of his back. He suffered compression fractures to his back.,1
An employee was repairing a roof when a wind gust caught an aluminum sheet and pushed the employee off the scaffold and box truck resulting in a broken pelvis.,1
"On May 15, 2017, an employee suffered carbon monoxide poisoning from an exhaust leak while driving.",1
"An employee was helping to rig down a rig floor when the floor plate became hung up and slid out, striking him in the hard hat. He suffered a laceration on the right side of his forehead, requiring surgery, and fractures to his fifth and seventh vertebrae.",1
An employee was cutting PVC pipe with a circular saw when it kicked back and deeply lacerated the employee across the mouth and nose.,1
An employee tripped and fell over a dog leash while walking up residential steps.,1
An employee was working on a truck trailer when the trailer slipped and pinned the employee between it and the truck. The employee suffered a crushed rib.,1
"An employee was working on a trailer resting on a wooden block when the trailer shifted off the block and fell on the employee's toe, breaking it.",1
"An employee was using a floor-mount drill press to drill holes in aluminum plates when his left thumb and a left finger became tangled in the press, requiring hospitalization and surgery.",1
"An employee fell off a stepladder while installing a new HVAC unit, hitting the floor and suffering a head fracture.",1
An employee was removing a jammed pickle from a tumbler filler when it rotated and amputated the employee's left index finger. The machine was not locked out at the time.,0
An employee was preparing to weld on a small building frame and had removed the strap securing it when a gust of wind blew the frame over. The frame then struck him on the right knee and the back of his head. He suffered right leg fractures above and below the knee.,1
An employee was attempting to attach a chain to forklift forks when the forklift crushed his right hand.,1
An employee was carrying bags of garbage to put into a dumpster outside the facility when he had back spasms and was hospitalized.,1
"An employee was driving a standup forklift in the warehouse when he struck a bump post that buffers pallet racks. His left heel was caught between the post and the lift, de-gloving his heel pad. His foot was outside the driver compartment at the time of the incident.",1
"An employee and a coworker were installing a new cable line at a house. The employee climbed a ladder to cut the old dropline loose. While descending the ladder, the employee fell approximately 5 to 10 feet and hit the concrete sidewalk with the left side of the body. The employee was hospitalized.",1
"An employee was stacking bags of beans in a railcar and was standing on them when the stack shifted and he fell to the railcar floor. He suffered a lacerated forehead and fractured right wrist, requiring overnight hospitalization.",1
"As an employee was leaving a bathroom stall to wash her hands, her knee gave out and she fell forward. She suffered a broken bone spur in her kneecap and was hospitalized.",1
"On May 16, 2017, an employee was driving a multi-purpose vehicle around a curve when the vehicle flipped over. The employee suffered multiple fractures to the hands and wrists.",1
"A temporary employee and two coworkers were attempting to secure a tailgate onto a dump truck when one of them lost control and dropped the tailgate. It fell down on the employee's hand, amputating his left middle fingertip (to the cuticle) and fracturing his ring fingertip.",0
An employee was walking a horse around the barn. The horse spooked and hit the employee's face with its front leg causing an eye injury.,1
"An employee was running a hydraulic press with a coworker when the press smashed the employee's left hand, amputating the ring finger.",0
An employee was taking a blood sample from a psychiatric patient when the patient punched the employee.,1
"An employee was replacing a ballast when his hand contacted an energized wire, causing an electrical shock and second degree burn.",1
A temporary employee was operating a forklift when his arm was pinned and fractured between the lift and a wall.,1
An employee suffered a thumb amputation while testing a shock absorber machine when the machine dropped on his thumb.,1
An employee was tarring a roof on a building when he fell through an area of the roof where metal decking had been removed from the inside. He broke his left leg.,1
An employee was stepping out of a truck frame when he broke his left leg.,1
An employee was cutting a piece of aluminum angle iron with a chop saw when the saw caught the piece and pulled it out of place. The angle iron piece then cut and amputated the employee's right index finger at or above the second knuckle. The chop saw was guarded at the time.,1
"An employee was descending 6 feet from an upper roof to a lower roof by stepping onto a stepladder and climbing down. The stepladder broke and the employee fell 5 feet onto the lower roof, injuring his back and requiring hospitalization.",1
"An employee was shoveling sand on a roof. While stepping from one level to a lower level, the employee rolled and fractured the right ankle.",1
"As an employee was preparing to hook up a trailer to a customer's vehicle, the customer hit the gas instead of the brake, colliding with the employee. The employee was hospitalized with back and rib injuries.",1
"An employee was descending from a storage rack when he stepped into a wheeled cart and fell to the floor, suffering a contusion and concussion. He was hospitalized.",1
An employee was placing a cigarette box on a conveyor system. She was using a scanning device that was positioned on her right index finger with a power cord that connected to a unit located on her wrist. The cord and the employee's right hand were pulled between the rubber belt and idler tensioner of the conveyor. Her skin was pulled back from her hand.,1
"An employee had just repaired an overhead door chain in an ambulance garage and was climbing down a 12-foot A-frame ladder. His left hand was resting on the chain he just repaired when a paramedic came in and activated the switch to raise the garage door. His hand was caught between the chain and sprocket to the garage motor, amputating both middle fingertips.",1
"An employee was doing maintenance on a hydraulic tong. He was using his left index finger to remove water from the top of the tong's ring gear when the machine was activated. The tong began to rotate and pinched his left index finger, partially amputating it.",1
"On May 16, 2017, at approximately 10:55 AM, an employee was putting protectors on the end of a pipe when it became misaligned on the table. The thread inspector was tasking the next step on the process line by actuating the mechanical control switch to prepare a pipe for inspection. The employee noticed that the pipe was rolling back towards the thread inspector and pushed the thread inspector away from the pipe. The device (or kicker) that allows pipes to roll was left in the up position, and a second pipe rolled toward the employee, whose left hand was caught between the first and second pipes. The  employee suffered an open fracture to the left ring and pinky fingers.",1
"An employee was leaning against a guard that rotates a product conveyor when his glove became caught in a gap on the conveyor and began rotating. As he pulled his hand out of the glove, his left ring fingertip and nail were amputated.",0
"An employee was climbing a ladder to remove a flag from the middle of a cable drop line when the ladder popped in half and he fell to the ground, breaking a leg. Proper PPE was worn at the time.",1
"An employee was measuring and cutting metal studs using a 6-inch grinder/cutter. When he cut through the stud, the grinder kicked back at him and cut into his upper right leg.",1
An employee was on the loading dock when an 18-wheeler delivery truck backed up against his leg. He suffered a lower left leg contusion and was hospitalized.,1
An employee was reaching onto a shelf when the employee lost balance and their ring was caught on the shelf resulting in a left ring finger degloving.,1
"An employee was sitting outside on a stack of pallets. There was a 4' X 5' sheet of 1/4"" thick plastic leaning against the wall. The wind caught the sheet of plastic and lifted it up into the air. The sheet then came down on the back of employee's head, causing a slight skull fracture.",1
"On May 16, 2017, an employee was assisting a welder transition a pipe when he suffered from heat stress and required hospitalization.",1
"An employee opened a metal grinder used to grind down plastic parts. A cord hanging nearby was caught in the pinch point, which tore off part of the wiring insulation. The cord then energized the metal grinder, which electrically shocked the employee.",1
"An employee was operating a machine when it overheated, breaking an antifreeze line and spraying him with hot liquids. He received severe second degree burns to his shoulders, neck, and back area.",1
"On May 17, 2017, an employee experienced a heat-related illness in the afternoon hours while delivering mail, requiring hospitalization.",1
An employee had installed solar roofing panels and was transitioning from the rooftop to a ladder when the employee missed the ladder step and fell approximately 25 feet to the ground. The employee suffered a fractured pelvis and other injuries.,1
"An employee was loading the resonator into the blow mold machine when the employee's shirt was caught in the machine which made him stumble and hit the actuation button for the clamps. A clamp closed on the employee's right middle finger, crushing it.",1
"An employee was adjusting a conveyor belt's chain and sprocket when the employee's left index finger was caught by the chain and sprocket, amputating the upper left index finger. The conveyor was unguarded and was not locked/tagged out at the time.",0
An employee's finger was amputated between a gang saw's sprocket and chain.,0
"Employees were changing weights on a work-over rig from a 12 o'clock to 6 o'clock position when one of the moving weights struck an employee in the back. He suffered broken ribs and a collapsed lung, requiring hospitalization.",1
"An employee was cleaning a conveyor line and got his right pinky finger caught in the rotating shoot, resulting in amputation.",0
"On Wednesday, May 17, 2017, at approximately 5:00PM, an employee was attempting to change a 6-inch lawn tractor tire on a tire changing machine. While he was breaking the bead of the tire from the rim, the tool slipped, causing his finger to become caught between the tire rim and the side of the machine. His left index fingertip had to be surgically amputated.",0
"An employee was unhitching a trailer and was putting it on a block when the trailer rolled off. The jack stand came off the block and landed on the employee's right foot, amputating his right big toe.",1
"An employee tripped over a metal threshold and fell to the floor, suffering knee and shoulder pain and headache.",1
An employee's left thumb tip was amputated by a rotating belt and pulley. The belt and pulley were guarded at the time.,0
"An employee was tightening a material guide tube on a cut-off machine when he contacted the belt and pulley, suffering a soft tissue amputation.",0
An employee was repairing an HVAC unit when the refrigerant leaked out and severely burned both hands.,1
An employee was trying to line up the back and front rollers of a jammed conveyor when his left ring finger was partially amputated between the sprocket and drive chain.,0
"An employee was manually moving a small dumpster when it toppled over onto his leg, breaking it.",1
An employee was unplugging an extension cord from a wall on the fifth floor when it got caught on the door frame of the hydraulic double doors. He reached between the door frame and door to remove the cord when the hydraulics triggered to close the door catching his right middle finger between the door jamb and door. The fingertip was amputated.,0
"An employee was cutting a board on a table saw when the board kicked back, causing the employee's finger to contact the rotating saw blade. The employee suffered a severe laceration through the knuckle of the fifth finger.",1
"On May 17, 2017, at 8:30PM, an employee was standing on a platform and leaned against a railing that dislodged, causing him to fall to the ground. He fractured his left wrist and struck the back of his head.",1
"An employee was moving pallets in a truck trailer and used his left foot to move a broken pallet stringer. The following morning, his left big toe was swollen and had blood blisters, requiring hospitalization.",1
"On May 17, 2017, at 9:30AM, an employee was filling a bucket with hot tar when the spigot broke, allowing hot tar to splash and burn his left hand, right forearm, and face .",1
"A temporary employee was assigned to conduct a flow test inside the jet bubbling reactor during a scheduled outage. The employee entered the reactor, stepped into the flow of air and was pushed out of the doorway and against a guardrail system outside the doorway resulting in a broken tibia and fibula and contusions.",1
"An employee was processing parts. While lifting a parts processing basket out of a heated alkaline cleaner solution, the metal handle pulled out of the basket and the heated solution splashed onto the employee's right side. The employee suffered burns to the right-side neck, arm and upper leg.",1
"On May 17, 2017, at approximately 10:45 a.m., an employee entered an area between the lumber deck and accumulation deck to clear sawdust. The employee's clothing became entangled around a rotating, unguarded horizontal shaft and he suffered a groin injury. He was hospitalized.",1
An employee was opening the hood of a truck and caught a finger between the air handler and hood resulting in a laceration and hospitalization.,1
"While operating a stand-up forklift, an employee was struck in the right ankle by another stand-up forklift operator who was turning a corner with the forks approximately 1 foot from the floor. The employee's right ankle tendons were severed, requiring hospitalization and surgery.",1
"An employee was changing from one tether to another to get to a different section of a roof when he slipped and fell 10 feet to the ground, bruising his right knee and requiring hospitalization.",1
"An employee suffered from heat illness and severe dehydration while performing carpentry work, requiring hospitalization.",1
"An employee was walking down an aisle to fill a customer order when a forklift backed up and ran over his right foot, crushing it. He was hospitalized for surgery.",1
An employee was inspecting the motor of a shot blast machine when a coworker activated it. The machine amputated the employee's index finger.,0
An employee was moving a reel of wire when her left ring fingertip was caught and amputated between the reel she was moving and a stationary reel.,1
An employee was cutting ribs with a band saw when the blade amputated the employee's right index finger.,1
An employee was attempting to unlock barges at a job site when the employee's left middle finger was caught between the lock and the barge. The employee suffered a fracture and partial amputation to the top distal portion of the left middle finger.,0
"An employee was about to throw water out of a 5-gallon container while leaning on a stair railing when the railing broke and gave way. The employee fell 30 feet to the ground and struck his head, losing consciousness and requiring hospitalization.",1
"An employee was bitten by a dog while delivering mail on a walking route. The employee's right palm was punctured and became infected, requiring hospitalization.",1
An employee was replacing a belt pulley on a running fan and a fan blade amputated the right ring fingertip.,0
"An employee got a finger smashed in a door jam, resulting in a fingertip amputation.",1
"An employee was in the stairwell, going downstairs to the conference room when the employee slipped, fell and fractured her foot.",1
An employee was on the roof of a high-rise preparing to clean windows when he fell five stories to the parking garage below.,1
An employee fainted from the heat while performing electrical work.,1
An employee was operating a forklift when she ran into a second stationary lift. The stationary lift's clamper entered the driver's cab and injured her right leg and hip.,1
"An employee was struck by a motorist while flagging oncoming traffic in a work zone, suffering severe head and body trauma that required hospitalization and surgery.",1
"On May 18, 2017, an employee was operating a mechanical power punch press and sustained a crushing injury to a finger.",1
"On May 18, 2017, around 2:00 pm, an employee began to feel ill at the end of his shift. He had spent the morning removing a black buildup of pitch from a commercial roof and the afternoon installing new roofing material. He was hospitalized with heat-related illness.",1
"An employee was working on top of a fire engine during the assembly process. The employee closed the back door, lost his balance, and fell to the floor, fracturing his shoulder, wrist, and clavicle and suffering a concussion.",1
"On May 18, 2017, at approximately 2:30 PM, an employee swung open a machine door to allow a pipe to roll into the machine. His left index fingertip was pinched in the door hinge and had to be amputated.",0
"An employee was positioning a dipper arm on a mini-excavator line. His finger was in the pin hole when his coworker hammered in a pivot pin, creating a pinch point that amputated his left middle fingertip.",0
"An employee was using a pressure washer when he noticed slack in his hose. He leaned over to pull the slack and lost his balance. He grabbed the wand and inadvertently engaged the trigger. The wand then ran over his right foot, causing a deep laceration.",1
"An employee was standing on the trailer of a tractor-trailer performing maintenance repair when he slipped on hydraulic fluid and fell 4 feet to the ground, landing on his back. He suffered a broken clavicle and 2 fractured ribs.",1
An employee was punching holes in angle iron when the employee's left thumb was caught and partially amputated between the angle iron and the punch press. The punch was guarded at the time.,0
"An employee's right forearm was caught and fractured in a moving conveyor belt, requiring hospitalization.",1
"An employee was working on a piece of electrical equipment when his wrench came in contact with an energized electrical box. An arc flash occurred, causing first and second degree burns to the employee.",1
"An employee was cleaning out a concrete pipe using an air compressor to blow out the system. The air pressure inside of the pipe was relieved, causing the pipe to hit his chest and break his ribs.",1
An employee suffered a left thumb laceration while using a Skil saw.,1
"An employee was working inside a dryer to change out a turn-flow. He was stepping on a 2-inch x 10 ft. board to hook his lanyard when the board broke and he fell 50 feet to the hard surface below, fracturing his skull and breaking his collarbone.",1
"While cutting out a window on a construction site, an employee fell approximately 8 feet to the surface below and broke a leg.",1
An employee was driving a powered industrial vehicle (PIV) when he lost control of the PIV and quickly dismounted it. His foot was then caught and crushed between a rack guardrail and the PIV.,1
"After installing a wire for cable television, an employee was descending an extension ladder resting against telecommunication wires when the wires broke, causing him to fall approximately 10 feet. He fractured his left foot.",1
"An employee was positioning a counterweight to be displayed in a renovated building. The counterweight slipped and slid down, partially amputating the employee's finger as it was caught between the flat face of the weight and the floor opening.",0
An employee's left thumb was pulled into a bench grinder and was partially amputated. The grinder was unguarded at the time.,0
"An employee was stepping out of a truck when he missed the last step and fell to the ground, hitting his head.",1
An employee was moving a 400-600 lbs. lame sow in the barn. The sow slipped and fell on the employee's right leg crushing it below the knee.,1
"An employee was loading an aluminum, oil-fired furnace (to make aluminum ingots) when a coworker threw a coil-covered shock into the furnace. The shock ruptured and sprayed hot oil onto the employee, resulting in third degree burns to the upper extremities.",1
An employee experienced heat exhaustion during the second 8 hours of a 16 hour work shift. The employee was later hospitalized.,1
"On May 18, 2017, an employee was rolling a reel of steel when it tipped onto the employee's right foot, crushing it.",1
"An employee was descending into a trench using a ladder when he lost his footing and fell off, hitting a pipe in the trench. He broke his ribs and clavicle.",1
"On May 18, 2017, an employee was monitoring the flow of dough at a mixer. The employee was attempting to remove accumulated dough when the mixer's chopper mechanism partially amputated the employee's left ring finger.  The mixer was guarded at the time.",0
A powered industrial truck ran over and broke an employee's left foot.,1
"On May 18, 2017, at approximately 11:05 AM, an employee was working with a valve when hot oil inside the valve caused second degree burns to his right arm and lower back.",1
"An employee took a break from abrasive blasting and laid the abrasive blast nozzle on the ground. When he returned to the work area, he stepped on the blast control nozzle and suffered abrasions to the left thigh from the abrasive blast media.",1
An employee was operating a pedestal-mounted band saw when it amputated his left index finger to the first knuckle.,0
"On Thursday, May 18, 2017, at approximately 12:30 PM, an employee tripped over an elevated concrete slab and fell, suffering a broken nose, chipped tooth, bruised ribs, fractured right arm, and right leg contusion. She was hospitalized and had surgery.",1
"On May 18, 2017, an employee was guiding the electrical wire onto the wooden reel to ensure it went on evenly when the employee's right ring finger was crushed between the reel and the wire while it was turning resulting in amputation of the finger.",0
An employee participated in a two-person lift of a core pole that weighs approximately 100 lbs. at a  loom machine. The employee suffered an incarcerated umbilical hernia that required surgery.,1
An employee was moving a manhole cover when it slipped and crushed his right middle finger. His fingertip had to be surgically amputated.,0
"An employee fell 8 to 10 feet from a boat deck while removing plastic wrap, suffering leg and hip injuries.",1
"An employee was backing up his forklift when a second forklift operator, who was also backing up, struck him. When the two forklifts collided, his toes were crushed.",1
"A temporary employee was using a pallet jack to unload materials at a jobsite when the pallet jack moved toward him. The pallet jack or the materials lacerated his legs, requiring surgery and hospitalization.",1
"An employee was closing lids on the top of railcars containing grain. Wind was blowing, causing him to lose balance and fall to the ground. He suffered bruises and abrasions to his head and back and soreness in his left knee.",1
"An employee was working on an aluminum platform when part of the platform's weld failed, causing the employee to fall 2 to 3 feet onto the wood deck of a semi-trailer. The employee dislocated a foot.",1
An employee was hosing down floors with water when he noticed a piece of chicken stuck in an external neck skin cutter and attempted to remove it. The cutter's moving blades then amputated his left index fingertip. The machine was guarded at the time.,0
An employee was trying to hook up a trailer to a truck hitch when his right index finger was pinched and amputated between the trailer hook and the truck hitch.,1
An employee was bending rebar steel with his hands and a rebar bending machine when his right pinky fingertip was pinched and amputated between the rebar.,0
An employee was pulling on a tarp that was on a trash truck when he slipped from the back of the truck and hit his head.,1
An employee's hand was crushed between a slip joint and a tubing stack that was being raised out of a well head. Two of the employee's fingers had to be surgically amputated.,0
An employee was offloading a mini excavator when he noticed that the trailer didn't fold back properly to its flat position. He tried to push it back down to lock it in place and was checking how much farther it need to go when the trailer came down on his left index finger and crushed his fingertip.,1
An employee was riding a short jack out of the dairy storage area onto the dock area and collided with an employee who was running a lift driver. The employee suffered a right leg fracture.,1
"An employee was operating a mill machine when his hand contacted the moving parts in the point of operation, partially amputating two fingertips.",0
"An employee was standing near the base of a material hoist when a wheeled trash cart fell from the hoist's elevated platform and struck the employee, fracturing two fingers and several bones in his left hand.",1
"On Friday, May 19, 2017, at approximately 9:48am, an employee was driving her car on her rural delivery route when the car overheated. She parked the vehicle, got out, and attempted to raise the hood when hot antifreeze spewed out of the front grill and burned her from the waist down and on both wrists. She suffered second degree burns and was hospitalized.",1
An employee was cutting thin plastic sheets using an office-style paper cutter when the cutter amputated his left thumb tip.,0
"An employee was operating a forklift when it skidded on the wet floor. The employee's foot was outside of the vehicle and became caught on the wall, breaking bones.",1
"An employee's hand slipped while changing a drill chuck, lacerating his left thumb.",1
"An employee was holding a socket on top of a kingpin while a coworker struck the pin with a hammer. The coworker missed the pin and hit the employee's right middle finger, fracturing it. The employee was hospitalized overnight and had surgery.",1
"An employee was turning a saw horse when the saw horse's bay metal tube slipped and pinched his right index and middle fingers. His middle finger was fractured, and his index fingertip was amputated.",1
"An employee was removing a threaded grease fitting from a valve. As the fitting came loose, it struck the employee's hand. Air, water, and grease also released with some pressure. The pressure or the fitting lacerated the employee's hand between the thumb and forefinger and abraded the skin between the thumb and wrist. The employee was hospitalized and had surgery.",1
"An employee was cutting bone-in pork on a band saw. When he fed the product into the blade, it kicked out and rolled below the height of the guard, bringing his hand into contact with the blade and partially amputating his finger.",0
"An employee was leaving a patient's home when the patient closed the door on the employees hand, amputating a fingertip.",1
"An employee was directing a driver who was backing up into the dock area. The driver did not hear him say stop and backed into his hand, smashing and contusing it.",1
"An employee was retrieving an item from her work locker when it fell over and knocked her to the floor, where she struck her head and suffered head trauma.",1
"An employee was using a hose to transfer acid from a truck tank to a storage tank when the hose became dislodged from the tank, spraying acid compound on the employee. The employee suffered second degree burns to the chest, arms, and head.",1
"Two employees were replacing a transformer to restore power to a residence. During the process, one of the employees came in contact with an energized line. An electrical current entered his right hand and exited his right knee, causing severe burns.",1
"An employee was pulling water/fluid from a frac tank when he noticed a leak on a neighboring tank. He tried to stop the leak by hitting the valve with an end cap he found on the ground. When the cap hit the valve, it sparked and caused a flash fire. He suffered burns to his face, chest, and hands.",1
An employee was bleeding an ammonia line when ammonia came out of the valve and sprayed the employee's face. The employee inhaled ammonia refrigerant and had to be hospitalized.,1
"An employee had just picked up a pallet of product with a forklift when he noticed the product had shifted. He stopped the forklift and climbed on the forklift to adjust the product. He lost his balance and landed on his left foot, fracturing his left ankle.",1
"An employee stepped on a store fixture, slipped, and fell to the ground, breaking the left wrist.",1
An employee was unhooking bridles from the top of a bomb cart when he fell to the ground.,1
An employee was repairing a pusher motor when the employee's finger was caught in a metal grate.,0
"An employee was escorting a coworker to the hospital's emergency room when the coworker pulled out a knife and stabbed the employee several times. The employee received lacerations to the head, left ear lobe, left upper back, left upper neck, left forearm, left arm and left shoulder.",1
An employee was taking money from a customer at the pick-up window and strained their back.,1
"An employee was walking toward the register to relieve another cashier when she tripped and fell. She hit her side on a baggage carousel as she was falling to the ground, fracturing a rib.",1
An employee was driving an all terrain vehicle (ATV). He attempted to navigate a curve but was unable to control the ATV. The ATV went on its side and he fell on a rock and fractured his ribs.,1
An employee was walking in the cafeteria when he lost his footing and fell. He broke his left hip and was hospitalized for surgery.,1
An employee was removing train cars from a locomotive when the train wheel ran over and smashed the employee's right foot. The foot had to be amputated.,1
An employee was stacking wood near a dryer when he became dizzy and started to feel ill. He was overheated and needed to be hospitalized overnight.,1
"An employee was talking to other employees who were replacing insulation panels on top of a shipping cooler when he fell approximately 12 feet to the concrete floor, injuring his head and fracturing his shoulder and ribs.",1
"An employee was walking under a gizzard machine to retrieve a hose when his hand struck the machine, amputating his right middle finger above the knuckle. The machine was unguarded and not locked out at the time.",0
"An employee had covered a leaky roof with a tarp and was stepping off the roof onto a ladder when it slipped out from under him. He fell to the ground, hitting a landing gear crank on the way. He suffered a fractured pelvis and cut on the back of his upper left leg.",1
"An employee was driving a forklift to move pallets when he saw a box starting to fall. As he dismounted the forklift to catch the box, the forklift continued moving. His left foot was caught between the wooden pallet and the fork of the forklift, puncturing the skin and bone.",1
"An employee was checking a leak at the bottom of a fluid bed machine. He was pushing the bowl back into the machine to prevent powder from leaking when his right ring finger was caught between the bowl and the machine, amputating his fingertip at the first knuckle. The machine was not running or powered on at the time.",0
An employee was inflating a skid steer tire and was putting the cap on the valve stem when the bead slipped off the rim. The escaping air caused the assembly to jump and hit the employee in the face. The employee was hospitalized with facial and head fractures.,1
"An employee fell approximately 9 feet off a ladder while closing a roof hatch, fracturing an elbow.",1
An employee was operating a forklift (stand up-type) when the employee's foot and ankle were crushed between a column and the body of the forklift.,1
An employee was loading equipment in the service truck when a metal chute slipped and cut the employee's right ring finger.,1
"An employee was operating a machine that prints logos onto fabric materials when the machine began to leak ink. As the employee was attempting to remove ink from the roller using a towel, the rollers caught the towel and pulled her hand into the machine. Her right little finger was crushed and de-gloved. Her finger had to be surgically amputated.",0
"An employee was about to take an extension ladder down when he slipped and fell 6 feet off the ladder to the ground, fracturing his right knuckles.",1
An employee was building a gear box when the gears amputated his left middle finger.,1
"An employee was operating a reach truck forklift when he was pinned between the forklift and a horizontal rack, fracturing his right-side ribs.",1
"An employee lost his balance and fell over while using a urinal, cutting his head and fracturing his arm.",1
An employee was grating watermelons on a conveyor belt that was moving very slowly. He was attempting to make the conveyor belt move faster when it caught and amputated his right middle fingertip.,0
"An employee was operating a forklift with a dump hopper attached to the forks. He drove the forklift to a dumpster, exited the vehicle, and activated the hopper's rotation handle to dump a load of paper into the dumpster. His left arm was caught in the moving parts of the hopper, which resulted in a compound fracture between the elbow and the shoulder. He was hospitalized and had surgery.",1
Two employees were working from a column form wall about 19 feet in height to complete rebar tie-in on the cage of the column. Both employees were descending from the column form wall when they lost their footing and fell to the concrete slab below. One employee sustained a crushed heel and broken lower leg and was hospitalized. The second employee sustained a back injury.,1
An employee fell 20 to 25 feet while climbing a pole and fractured his L-1 vertebra.,1
"On 5/22/2017, at approximately 10:30, an employee was installing an auger inside the housing of a larry car. The employee rigged the auger with chain falls and come-a-longs to position it inside the housing. During the installation, the employee's left index and middle fingers were caught and partially amputated between the auger and the housing. The equipment was locked out and not powered at the time of the incident.",1
"An employee was throwing trash into an open top rolling dumpster and fell, breaking his right hip.",1
An employee was helping to trip tubing out of a well hole while working on the rig floor when his index fingertip was crushed between pipe tubing and the rig elevator.,1
An employee was operating a melt stick former that cuts butter into sticks. She was attempting to remove a piece of paper that was stuck to the filler (blade) when the blade partially amputated her right middle finger below the nail and cut her right index finger.,0
"An employee was walking inside the warehouse when he tripped and fell over a box that was sitting on the floor. During the fall, his head hit a wall, fracturing his neck, bumping his eye brow, and cutting his nose.",1
"An employee cleaned a table top and turned to walk away when her feet became caught, causing her to trip and fall. She fractured her right hip.",1
"While working on a band saw on the production floor, an employee suffered a pinch/crush injury to the right hand resulting in a hospitalization. The saw was running at the time.",1
"An employee was opening the oil tank hatch when a spark ignited the material inside the tank. The employee sustained burns to the face, back and hands.",1
A temporary employee was operating a horizontal bandsaw. The employee started to adjust the in-feed rail on the saw using a wrench while the saw was running. The wrench slipped in the employee's hand and his right index finger contacted the saw blade. The employee was taken to the hospital and the index finger was amputated in the hospital the day after the incident.,0
"An employee was clipped by a semi-truck while driving a company bus. The employee was taking photos of the damage when the semi attempted to flee the scene and struck the employee, chipping a bone in the employee's neck.",1
"An employee was driving a company truck to a job site when he got lost and was trying to find another route. As he was trying to find his way, the truck entered the soft shoulder of the roadway. He overcorrected the vehicle and it rolled over. He suffered a concussion and a bruised clavicle and chest.",1
An employee was removing bumper metal from the side of a boat while working off of an electric scissor lift when he fell approximately 10 to 12 feet to the concrete and cracked his skull. He was hospitalized. The scissor lift was not guarded at the time of the incident.,1
An employee was pulling a 3-inch piece of pipe out of a pile with a tractor. The employee then got off the tractor and was pulling the pipe by hand when it slipped and smashed the end of the left ring finger.,1
An employee's right index finger was amputated when strong winds blew a door closed on his finger.,1
"An employee was working at a round table pulling lumber when his right arm became caught in a belt roller, crushing it and requiring hospitalization.",1
"An employee was standing on a ladder approximately 7 to 8 feet from a lower level when the employee fell, fracturing ribs and suffering a head injury.",1
An employee was operating a cardiac monitor for a patient when a person visiting the patient sprayed a chair in the room with an unknown material. The employee then experienced respiratory distress.,1
"On 05/23/2017, an employee attempted to fill a portable propane cylinder. The connection from the employee's tank to the customer's cylinder may have been cross-threaded. The employee was tightening the connection when the hose detached, allowing vapors to escape. The vapor cloud ignited and the employee suffered second and third degree burns to the upper torso and legs. The employee was hospitalized and had surgery.",1
"An employee was doing a security round when he tripped and fell on a sidewalk, fracturing his nose and cutting his face.",1
"An employee was operating a band saw. The employee stopped to use an air gun to blow excess metal chips from the area when his glove was caught on the running saw blade. His right hand was pulled into the saw blade, amputating his index finger.",0
"An employee's hand slipped into a metal shear, amputating his right middle finger.",0
"An employee was changing the ribbon on a linen press when his shirt became caught in the press machine. He twisted his body and fell to the floor, fracturing his femur and leg.",1
"An employee was between two dollies of a dolly train when it started to move. While attempting to move out of the way, the employee tripped, fell, and hit the concrete floor, suffering a broken hip.",1
"An employee was preparing coffee beverages and food items for patients in the work area when she slipped on water and fell onto the floor, fracturing her right leg and requiring hospitalization.",1
"An employee was operating a motorized overhead crane when the chuck became jammed. When he attempted to clear the jam, his left middle fingertip was pinched and amputated.",0
An employee had entered an excavation to remove misaligned sewer piping when the trench collapsed on the employee. The employee was bruised and required hospitalization.,1
"An employee was troubleshooting an open-top tank that recirculates water when the bottom of the tank fitting popped off, spraying and burning him with hot water.",1
"An employee was diagnosing a problem with a heat seal unit. His left forefinger was on the belt when it was pulled into the pulley, amputating it.",0
An employee was shoveling mulch and collapsed and was hospitalized.,1
"An employee was performing edged weapons defense training when her right foot became lodged between two padded mats. She fell to the ground and a coworker fell on top of her, causing her right leg to twist. She broke her fibula and tibia.",1
"An employee was riding in a utility cart. When the driver turned the cart, his foot became caught in the front wheel and he was thrown out of the cart onto the ground. He lost consciousness and fractured his leg and jaw.",1
"An employee was working from a swing stage scaffold when the scaffold's up switch was activated, raising the scaffold and pinning him between it and the stone ledge above. He bruised his chest and lost consciousness.",1
An employee was changing a well pump and attaching the pump jack head when the pump jack amputated the last digit of the employee's right ring finger.,0
"An employee was outside pulling a trash cart down a hill to the dumpster when he fell backwards and hit his head on the pavement, suffering a head contusion and a possible brain hemorrhage.",1
An employee fell 6 feet from the platform of a stock picker while getting an auto tire from a shelf resulting in a lower lumbar compression injury.,1
"An employee was part of a team preparing to unload parts from a truck using a crane. The employee was removing traffic cones from the storage area on the crane when the crane operator lowered the outriggers and struck the employee's left foot, breaking five bones.",1
"An employee was sitting in a golf cart, lost her balance and fell out fracturing her right wrist.",1
An employee was riding on the back of a pickup truck and slipped off the back fracturing his skull.,1
"An employee and a coworker were conducting a lift using an overhead gantry crane. The coworker was operating the crane and lifting the load, so the employee began to leave the danger zone. As he was walking, he tripped and fell over a 4x4 spacer that was permanently set on the floor. As he was falling, his hard hat fell off and he struck his head against a rack of aluminum pipes (finished product), suffering a head laceration that required stitches.",1
An employee was using a saw to cut meat when his right index finger contacted the blade and was amputated to the middle digit.,0
"An employee was loading molten sulfur into a trailer when the line clogged and the molten sulfur spilled out, burning the front right side of the employee's head.",1
"As an employee was removing tamales from the stove, the cooking tray tilted and the hot water contacted the employee, causing second degree burns on the lower right leg.",1
"An employee was using a lightweight miter saw to cut a 3 gauge (1/4"") aluminum channel when the sawblade became stuck in the aluminum channel, causing the aluminum channel to spin in the employee's left hand, lacerating it and fracturing his left middle finger.",1
"An employee was removing a hydraulic line from a piece on an excavator. The line was still pressurized and when the connection was broken, the line crossed his left hand, injecting hydraulic oil into the hand and causing a laceration. He was hospitalized.",1
"An employee was climbing a ladder when his foot slipped and he fell back, striking his head on the ground.",1
An employee was on a ladder running overhead fiber optic cable and fell off the ladder fracturing the left heel.,1
"An employee was using a lathe to machine a part when the employee's glove was caught in the lathe. The employee's hand was then pulled around the lathe, amputating the right middle finger and partially amputating the right index finger.",1
"An employee came through the back door from the outside and when the door closed, it did not shut all the way. The employee attempted to close the door by grasping it with her left hand and pulling it shut. Her left middle fingertip was then crushed between the door and doorframe.",1
"An employee was adjusting a coating machine's operating line using handheld tools when the machine activated. The moving rollers then broke the employee's arm, requiring hospitalization.",1
"An employee was in the basket of a lift removing lengths of pipe when the pipe loosened and fell unexpectedly, striking his forearm. He was hospitalized and had forearm surgery.",1
"An employee was stabbing a valve on a stack while guiding a forklift operator who was lifting and holding the rigged valve. The strap slipped off the valve, allowing the valve to fall and strike the employee's lower left leg, breaking it.",1
"An employee was using an overhead crane to move a 308-pound galvanized grate. The chain slipped in the hook and the grate struck the employee's left pinky finger, amputating the fingertip.",0
"An employee was unloading a pallet from the bed of a pickup truck. The employee went to grab shrink-wrapping to pull the pallet back. The shrink-wrapping failed and the employee fell from the truck bed and landed on his head, fracturing his skull.",1
"After loading a truck, an employee fell to the pavement while climbing off the vehicle, suffering a broken collarbone and possible concussion.",1
An employee received an electrical shock to his upper back while installing a powerline insulator.,1
An employee was operating a band saw to cut meat when the saw blade amputated the employee's right thumb tip. The saw was guarded at the time.,0
"Waiting for his truck tire to be repaired when the vendor's air compressor exploded, causing truck damage and shrapnel to strike the employee. He suffered cracked vertebrae and lacerations that required hospitalization.",1
"An employee was cleaning a stairwell when she became dizzy and fell backward, striking her head. She fractured her skull and orbital bone.",1
"A temporary employee was using a torch to cut scrap. A track-hoe with a shear was working approximately 40 feet from the employee. The shear dropped a piece of scrap to the ground, striking a 6-foot long, 3 1/2"" in diameter solid shaft. The shaft went airborne and hit the employee. He was hospitalized with injuries to his left shoulder, left hip, and left leg.",1
An employee was delivering beer to a convenience store. He was turning a loaded cart to go up a slight ramp when some of the cases of beer fell off the cart and the cart tipped over. The cart and cases of beer struck and broke the employee's leg. He was hospitalized and had surgery.,1
"On May 24, 2017, at approximately 9:00 p.m., an employee was attempting to isolate a pump and needed to clean the strainer basket. After opening the system, the employee was hit with steam, suffering second degree burns and requiring hospitalization.",1
"An employee was leaving the premises of a home when he missed a step and fell off the deck. He hit his head and broke a few ribs, requiring hospitalization.",1
"An employee was working on electrical connections from a scissor lift when an unexpected startup of a nearby suspended conveyor belt tipped the scissor lift over. The employee was injured and hospitalized. The employee suffered four broken ribs on the right side, nerve damage to the right wrist and hand because it was caught under the lift's handrail, and abrasions on the left knee and ankle.",1
"An employee was standing on a ladder hanging up signs when the ladder shifted, causing the employee to fall to the concrete floor. The employee fractured the right clavicle, right orbital socket, and skull.",1
"An employee was moving metal pipes by hand when the piping moved and created a pinch point. The employee's hand was caught in the pinch point between two pipes, amputating a fingertip.",1
"An employee had her hands on a metal drive-thru teller drawer at the same time that a nearby transformer blew, resulting in her hands being electrically shocked. She was hospitalized.",1
"An employee slipped and fell while stripping a floor in an office building, suffering a right hip compound fracture.",1
"An employee was working on a gas/oven combo. When he turned on the gas burner on the 12-burner range, he received a flash burn on his face.",1
An employee was servicing a generator and had removed the last bolt from the armature housing when the housing came off and pinned his left arm between the housing and armature. He fractured his ulna and dislocated his radius.,1
"An employee was getting into a footing approximately 3.5 feet deep to show a crew member how to tie the rebar. As he entered the footing, his foot slipped and fell on the rebar. He suffered a laceration/puncture wound to the base of his neck next to the clavicle.",1
"An employee was driving a golf cart toward the golf cart parking area. The employee was driving too fast and struck the injured employee, pinning him between the wall and golf cart. The injured employee broke his left tibia and knee.",1
"An employee was underneath a card apron attempting to remove fibers from the fan blower. He was trying to un-choke the hose inside the fan housing when his right hand made contact with the rotating blades, amputating his ring finger.",0
An employee received an electrical shock while installing a new powerline.,1
"On 5/24/17, an employee was removing the bottom bracing of a wall when it began to collapse. The employee attempted to catch the wall and suffered an umbilical hernia, requiring hospitalization.",1
"On May 24, 2017, at approximately 12:00 PM, an employee was working with metal parts when a metal sliver became lodged in his left middle finger. His hand later became severely infected and required hospitalization the following day.",1
"An employee was near a loader truck that was picking up and transporting pieces of old road concrete when a piece of concrete fell off the loader basket and struck the employee in the head, causing a concussion.",1
"On May 24, 2017, an employee was pushing a piece of wood into a wood shaper when his right pinky finger entered the point of operation and contacted the shaper. He sustained a soft tissue amputation of his fingertip.",0
An employee was standing on the floor positioning a roll of paper onto a wrapping station. A forklift came up behind the employee and lowered the roll of paper towards him when his left leg was caught between the wrapping table and the roll of paper resulting in a fractured fibula.,1
"An employee was walking down the back of the house stairs and fell about eight steps down striking her head on the concrete wall. The employee injured her collar bone, ribs and head.",1
"An employee was preloading a truck when a valve either failed or accidentally opened and sulfuric acid sprayed his face, requiring hospitalization.",1
"An employee was using a forklift to move a rolling cart with a spiral weldment. As he was pushing the spiral and cart, the forklift entered an inclined area. The front of the cart and the spiral started drifting/rolling down the incline. He put the forklift in reverse and backed up to get in front of the spiral and cart as it was rolling and then reached out with his right hand to deflect the cart's direction of travel. His right finger middle finger was then caught and crushed between the spiral and the roll cage of the forklift.",1
"An employee was installing an inflatable flow-through plug into a sewer pipe when the sewer pipe broke. The inflatable plug became dislodged and struck the employee's right leg, breaking it.",1
An employee's right middle finger was caught and amputated in a folding chair.,1
"The employee was installing insulation. A 4' x 4' insulated metal panel slipped from the hoisting clamp, bounced and ricocheted off the building, and struck the employee's left arm fracturing it.",1
"On 5/25/17, an employee was setting up a tote on a scale when a hose came out of the tote, which was being filled with hot deionized water. The water contacted the employee, causing first and second degree burns on the employee's back and foot.",1
"An employee was pushing an assembly onto a conveyor when a heavy component fell from the conveyor and struck the employee's head. The employee suffered a fractured skull and neck, as well as shoulder injuries, requiring hospitalization.",1
"An employee was framing a soffit using screws and a drill when a screw became lodged in his hand, injuring his left index finger.",1
"An employee was standing on a ladder placing a radiator on a top shelf when he fell and lost consciousness. He suffered a concussion and back pain, requiring hospitalization.",1
An employee was climbing a fixed 12-foot ladder to the roof and fell resulting in compression fractures to both feet.,1
An employee was struck by a car in the parking lot.,1
An employee suffered a finger amputation while working on a machine.,1
"An employee was riding an ATV, hit a rut in the dirt road and struck a tree. He was thrown from the vehicle and suffered back and right shoulder pain.",1
An employee suffered a finger amputation while cleaning a mixer machine. The machine was guarded and energized at the time.,0
An employee was trying to remove a board that was lodged in the infeed of an edger when his right ring finger made contact with the cutter-head and was amputated.,1
"An employee tipped over an uneven portion of the sidewalk and fell to the ground, contusing her right elbow and shoulder.",1
"An employee was breaking down a machine used to separate meat from the bones. The machine was locked out and de-energized. He placed the machine components on a cart to further disassemble them. He then picked up an outer housing off the cart known as the front flange. As he picked up the part, it slipped from his hand and his finger went into the guide bar opening. When the part landed back onto the cart, the guide bar slammed onto his finger, amputating his right index fingertip.",0
"While installing new electrical wires from a boom lift, an employee fell to the ground, suffering bone fractures.",1
An employee was dismantling a one-tier scaffold and put all the boards to one side. It started to fall and as he tried to dismount the scaffold a board caught his foot and fractured the right ankle.,1
An employee's fingers became caught in a dough-dividing machine. The employee suffered a finger amputation and multiple finger injuries.,0
"An employee was using a large screwdriver to clean hot plastic from the stationary cutting head of an operating repellitizer when the employee's right hand slipped and struck the cutting head blades, severing two tendons and lacerating the hand.",1
An employee was checking a noise under the hood of a vehicle in the belt area. A coworker started the car while the employee's hand was touching the belt. The belt and pulley then amputated his left index finger to the first joint.,0
"An employee became dehydrated while working on a rig and doghouse, requiring hospitalization.",1
An employee was performing electrical work from the platform of a scissor lift when the scissor lift tipped over. The employee fell 20 to 25 feet to the ground and suffered a fractured pelvis.,1
An employee was using a torque wrench and socket to connect a pipe flange when the employee's fingertip was crushed and amputated between the torque wrench and the pipe.,0
"An employee fell off the edge of a stage to the floor, fracturing the lower left leg and requiring hospitalization.",1
"An employee was trimming a tree at a height of 30 to 40 feet when he fell to the ground, injuring his neck, back, and ribs.",1
"An employee was cutting a metal tube with a band saw. While removing a metal shaving that came off the tube, the employee's right index finger contacted the sawblade and was amputated.",0
An employee was unloading merchandise when his right hand was pinched between the merchandise. He suffered a contusion and fracture.,1
An employee was working on a 16-inch stainless steel duct work. He was putting a coupling inside the duct and lacerated his wrist above his glove.,1
An employee had just exited a vehicle when it rolled and pinned him against a parked vehicle. He dislocated his hip and was hospitalized.,1
An employee was unloading freight and fell off the dock resulting in a left hip fracture.,1
"An employee was delivering steel material to a customer. As the customer offloaded the product from the employee's truck, the steel load shifted and fell, striking the employee's leg. His foot/leg were fractured and required surgery.",1
An employee suffered a back sprain while lifting a patient's leg onto the bed.,1
An employee was installing glass on the ground floor when a piece of glass fell from overhead where other workers were attempting to install from a lift. The piece impaled and lacerated the employee.,1
"An employee was observing as a forklift was unloading his truck when the forklift dropped lumber on his leg, fracturing it.",1
An employee was framing on the job site when his pneumatic nail  gun shot a nail into his knee. He was hospitalized and had surgery.,1
An employee was exposed to carbon monoxide from a propane forklift inside the building.,1
"An employee was going to sweep the floor when he tripped on his shoelaces and fell to the floor, fracturing his right leg.",1
"On 5/26/17, at 1:00 AM, an employee tripped on a floor mat. The employee's jaw then struck a counter and was fractured.",1
An employee was prepping trusses on the ground when his framing nail gun shot his left leg.,1
"An employee was troubleshooting a conveyor belt when the conveyor injured his left-hand tendons, requiring surgery.",1
An employee fell to the floor while pushing a machine. He suffered a femoral fracture of the right hip and was hospitalized.,1
An employee had been climbing trees for three days when both of his arms became rigid and tense. He was hospitalized with a muscle injury.,1
"After dismounting a forklift, an employee slipped and fell on the steel deck of a vessel, fracturing his left hip.",1
"An employee was loading a truck with 4x4 dunnage. When the load was lifted at one end, a 4x4 board snapped. The free end of the board struck and fractured the employee's face, requiring hospitalization.",1
"An employee was loading a large valve onto a forklift. As the forklift lifted the valve, it tipped over and struck the employee, lacerating and puncturing the right leg.",1
An employee fell down a step and broke an arm while exiting a restroom.,1
"A temporary employee was moving carts when one struck her and she fell to the ground, fracturing her left-side ribs and requiring hospitalization.",1
"An employee fell while driving a powered industrial truck, suffering a hip injury.",1
An employee was cleaning and removing debris from the printing press and their finger was caught in the infeed of the press when it started up for a new product run. The employee's right index finger was amputated and the middle finger was lacerated.,1
An employee was working from a ladder. The ladder shifted and the employee fell 11-12 feet to the ground fracturing the left femur.,1
"An employee was on an extension ladder trying to access the roof when he slipped and fell approximately 20 feet to the ground below, fracturing three vertebrae, his nose, his skull, and a wrist.",1
"An employee fell off a portable staircase while fixing conveyor canopies, fracturing the right wrist and elbow.",1
"An employee was attempting to remove a ring from a 96-inch pipe while standing on a rolling ladder. The ring popped out and bumped the ladder, causing the employee to fall to the ground and fracture his right wrist.",1
"An employee's shoe caught on the floor, causing her to fall to the ground. She landed on and fractured her left elbow.",1
"An employee's appendix became inflamed after being kicked by a patient, requiring hospitalization.",1
An employee was trying to de-escalate a patient and shut the room door to keep the patient from entering. Her right middle finger was caught and amputated in the door.,0
An employee was welding outside when he experienced leg and arm cramps. He was hospitalized due to heat stress and dehydration.,1
An employee was assaulted while trying to prevent a patient from setting off a fire sprinkler.,1
An employee was closing a door and caught his left index finger between the door and the frame resulting in a fingertip amputation.,0
An employee was taking a rolling trash cart to the building's compactor in the horizontal flat dock area when he fell about 1 foot from the dock to the lower concrete level and suffered a concussion.,1
An employee was sorting wooden boards on a finish line when a board weighing approximately 30 pounds fell on the employee's head. The employee suffered partial paralysis of the hands and feet and was hospitalized. The employee was wearing a hard hat at the time of the incident.,1
"An employee stepped upon a retaining wall to throw a parcel over a fence during a delivery. When she stepped off the wall, she fell and landed on the driveway, breaking her wrist.",1
An employee was conducting tree trimming operations when he was struck by a tree branch that broke his collarbone.,1
An employee was injured when he fell approximately 20 feet from a flat commercial roof.,1
An employee was servicing an evaporative cooler and lubricating the bearings when his left index finger was caught and amputated between the belt and the pulley. The machine was not locked/tagged out at the time.,1
"An employee was working in the deli area when she tripped over a table and fell, injuring her buttock.",1
"On May 27, 2017, an employee was a passenger in a golf cart driven by a coworker when the coworker made a turn and the cart flipped over, crushing the employee's right ankle.",1
An employee was making hamburger patties and amputated a middle finger in the meat grinder.,1
An employee was operating a moon buggy and got a foot caught between the buggy and a platform resulting in a broken foot.,1
An employee was standing near a pressure cooker at the end of the cooking cycle. The pressure cooker came open and the lid hit the employee in the head. Hot oil then sprayed and burned him on the face and hand.,1
"The employee was performing a daily ride inspection when his left hand was caught in a sheave, amputating his middle and ring fingers to the first knuckle. As he used his right hand to free himself, the sheave injured his right hand.",0
"An employee was rigging material on a crane. After releasing the rigging, the employee's pinky was smashed between a headache ball and the main block of the crane, amputating the fingertip.",1
"An employee opened the gasoline cap to a utility trailer's generator when a flash fire occurred, causing first and second degree burns to the employee's face and hands.",1
An employee was unloading a truck to deliver laundry to a hospital. The tommy gate on the truck he was unloading was approximately 2 inches above the dock. He tripped over the edge of the gate and hit his head against a linen cart.,1
"Two lift trucks were passing each other in a mobile truck aisle way. One was traveling in reverse, turned, swung wide, and struck a stack of panels, causing 8 to 10 panels to shift. The panels struck and fractured an employee's right arm.",1
"An employee exited his vehicle in the parking lot and tripped over the precast concrete parking bumper, fracturing his right hip.",1
"While traveling on a walkie stacker, an employee struck a coworker's forklift and suffered a left leg injury.",1
"An employee was about to install a panel on the left wing of an aircraft when the panel started to slip. As he tried to stop it from falling, he lost his balance and fell about 8 feet, hitting part of the engine and then the ground below. He injured his lower back and ribs.",1
"An employee tripped over a concrete jersey barrier, suffering a right knee contusion and lower back injury.",1
"After exercising while on duty, an employee suffered arm and leg soreness due to a heat-related muscle injury. He was later hospitalized.",1
"An employee was throwing trash into an outside dumpster when she tripped and fell, requiring hospitalization.",1
"On May 30, 2017, an employee was diving to a depth of 82-84 feet with a team in the Gulf of Mexico. He was using an oxygen tank, got tangled in the line and the air shut off. He was found unconscious by other divers and was brought to the surface were he was resuscitated.",1
An employee was slicing meat with a handheld knife when the blade partially amputated his left middle finger (no bone loss). Cut-resistant gloves were not worn at the time of the incident.,0
An employee was installing a fence post for a pole-mounted satellite dish. He was pouring concrete into the hole and mixing it with a shovel when his right middle finger was smashed between the shovel handle and top of the fence post. His fingertip had to be surgically amputated.,0
An employee was on a ladder working on a piece of equipment when he fell off and hit his head on the wall.,1
An employee was unjamming a glass container making machine and contacted the interior of the machine which is very hot. The employee suffered a severe burn to the right palm with embedded glass.,1
An employee was on a six-foot fiberglass step ladder and fell resulting in a fractured left ankle.,1
"An employee was crossing a pit aisle. She did not see a forklift and walked into it, fracturing her right foot.",1
An employee was observing manure belts for problems when the employee's left hand was caught and crushed within the running gears that drive the belts.,1
An employee was waiting in front of a switch gear box when the C-phase arc came out of the box toward the fuse he was holding and knocked him unconscious. He suffered an electrical entrance wound to his left index finger and electrical exit wound to the left and right big toes. He was hospitalized.,1
An employee was standing on a fairing step of a Blackhawk helicopter installing an armored wing. The employee slipped and fell 21.5 inches to the concrete hangar floor resulting in a concussion.,1
"While sweeping the parking area of a pump island, an employee was struck by a car that had just pulled away from the gas pumps. The employee suffered a fractured ankle and required surgery.",1
"An employee was pushing a plastic vat when his hand slipped. He then tripped over the vat while trying to stabilize himself, breaking his right ankle.",1
"An employee was tearing up ceramic tile when a tile chip ruptured the employee's left eye globe, requiring hospitalization and stitches.",1
"An employee and a coworker were attempting to loosen rusted bolts using a wrench and a sledgehammer. The employee was holding the wrench while the coworker struck the bolts with the sledgehammer. As the employee began to stand up, his coworker struck him with the sledgehammer, breaking his left middle finger.",1
An employee was loading oak blocks (90 lbs.) onto a planer when a block shifted and fell on the employee's foot.,1
"An employee fell and hit his head while painting inside a mechanical room, suffering a potential head injury.",1
An employee was cutting stock on a table saw when their glove was caught in the saw pulling a finger into the blade. The left pinky finger was amputated at the second knuckle. The saw was unguarded at the time.,1
"An employee was on top of a three-foot step ladder to inspect a weld in a large diameter shell. The ladder slipped on the curved shell, the employee lost balance and fell resulting in a fractured right elbow and right tibia and fibula.",1
"An employee suffered an allergic reaction while mixing an unknown chemical with water to clean surgical equipment, requiring hospitalization.",1
A temporary employee was trying to unjam a pipe that was stuck on a rack. He was using a rag to roll the pipe when it rolled back and pinned his thumb between the rack and pipe. His left thumb tip was amputated.,0
"An employee was operating a forklift. His foot was outside the tow motor when his pinky toe became caught on a walkway barrier. His pinky toe broke, requiring hospitalization and surgery.",1
"An employee was changing a cheese mold and had her right thumb in a hole when a coworker moved the blade, amputating her right thumb tip.",0
An employee was offloading an appliance from the back of a truck when he fell backward on top of another appliance that was already offloaded. He broke several ribs and suffered a collapsed lung.,1
"An employee was working on an ice machine when his left foot was caught by the raking mechanism and pulled against the frame of the machine, causing severe soft tissue damage. The ice machine was not locked out at the time.",1
"While carrying a pan of gravy into a walk-in cooler, an employee tripped on a floor mat that was folded over and injured the left hip. The employee was hospitalized.",1
An employee was connecting two chutes on a cement truck when one of the chutes slipped. The employee's right index finger was then caught and partially amputated between the two chutes.,1
"An employee was trimming a tree from an elevated bucket at an approximate height of 50 feet when a portion of the tree that was cut fell and struck the bucket. This caused the bucket to fall to a lower position approximately 8 feet below the original work position. The employee was flipped out the bucket and fell 42 more feet to the ground, breaking bones and requiring hospitalization.",1
"An employee was in a trench using a machine to locate the end of a pipe. A cylinder came off the machine, and the machine bucket became detached and rolled down the trench, striking the employee. The employee suffered a broken right wrist, left leg laceration and torn muscles, and a right ankle laceration.",1
"An employee was attempting to flip a large steel assembly with a coworker. The employee stood the assembly on its end and was attempting to adjust it when it became de-stabilized and fell onto the employee, crushing the employee's shoulder and chest.",1
"While replacing insulators inside a capacitor cabinet, an employee contacted live electrical conductors (11,000 volts). The employee suffered second and third degree burns and a fractured skull.",1
"On May 30, 2017, at 11:45 p.m., an employee was attempting to remove a piece of scrap from under a saw blade when the blade amputated his right ring finger at the nailbed.",0
"An employee was working on a milling machine using an overhead crane to flip a bloom bar. The bar struck the employee's legs, causing a laceration and two hairline fractures in his right ankle and left leg.",1
An employee was working on the ground in a scrap yard. A second employee operating a material handler released a bundle of scrap from the handler. The employee on the ground was struck by the bundle of scrap. He was hospitalized with a fractured pelvis and tailbone.,1
"After inspecting a roof area at a construction site, an employee stepped down on a ladder, slipped, and fell 20 feet to the ground, suffering broken ribs and a fractured spleen.",1
An employee was hammering a punch out of a large piece of steel when a piece of metal flew up and over his safety glasses and went into his eye.,1
"An employee suffered heat exhaustion and dehydration while walking, requiring hospitalization.",1
"An employee was using a texture gun to spray ceiling texture when the spray nozzle became clogged. As the employee was attempting to unclog the spray nozzle, it injected ceiling texture into the employee's left ring and middle fingers, requiring surgery and hospitalization.",1
An employee was inspecting the perimeter of a condominium for termites when a large dog jumped from a condo balcony onto the employee. He sustained multiple fractures to his arm and was hospitalized.,1
An employee was inspecting the perimeter of a condominium when a large dog jumped onto the worker from the balcony. The employee's arm was fractured in multiple places.,1
An employee was caring for a cat when it bit the employee. The next day the bite became infected and required hospitalization.,1
"An employee was shaking out a mold and lowering a flask when his left hand was crushed between the flask and a pattern, amputating his left ring fingertip.",0
"On May 30, at 11:50 am, an employee was exiting a crane. The cab of the crane was blocking the exit ladder on the right and left side, so he headed to the back of the crane and stepped on the maintenance access platform to head to the ladder when his feet became caught in rigging. He tripped and fell 5.5 feet to the ground, fracturing ribs.",1
"An employee was performing maintenance on a crane part when a spring coil sprung and struck the employee on the thigh and lower stomach, requiring hospitalization and surgery.",1
An employee was servicing the elevator in the machine room and reached down to pick up a bottle. His left index and middle fingers were caught in a wire cable sheave in the elevator resulting in a fingertip amputation.,0
"An employee noticed that a converting machine's airline was rubbing on a chain and sprocket. When he attempted to adjust the airline beneath the machine table, his right thumb tip was caught and amputated between the chain and sprocket. The converting machine table was unguarded at the time.",0
"An employee was running when he tripped and fell, hitting the floor and suffering a collapsed lung.",1
"On May 31, 2017, an employee's arm became red and swollen due to an insect bite. The employee was hospitalized.",1
An employee suffered a left thumb amputation while operating a spot welder.,1
"An employee was troubleshooting a press machine. When maintenance was complete, the employee restarted the equipment. During the first cycle, the equipment had bolts inside the break. As he was troubleshooting the problem with the bolts, his coworker pushed the cycle button, which caused a rod to push through the equipment. The employee's right hand was resting between the rod and stationary machine. When the rod came through, it amputated his right index finger to the first knuckle.",0
"An employee was working near a seafood counter when she slipped and fell to the floor, fracturing her femur and requiring hospitalization.",1
"An employee contacted live wires in an electrical box while standing on a ladder and was shocked, causing the employee to fall to the floor. The employee broke a femur, a wrist, and vertebrae, requiring hospitalization.",1
An employee was helping to install an orbit valve when his right ring fingertip was caught and partially amputated between the orbit valve and a flowline flange.,1
An employee was operating a forklift when his left foot became trapped and displaced between the forklift and a filled intermediate bulk container.,1
"On May 31, 2017, an employee was performing landscape work outside when around 3:45 p.m. he started showing symptoms of overheating such as vomiting. The employee was hospitalized for heat stroke.",1
"An employee was working under a truck. When he removed the drive shaft, the vehicle began to roll backwards. The truck's catalytic converter then struck his chest area, injuring his ribs and clavicle. He was hospitalized.",1
"Employees were restarting a digester after an acid cleaning. Hot liquor (300 degrees) was being introduced into the digester, but the valve to the acid tank was not closed, so hot liquor entered the acid tank and caused the lid on the fiberglass tank to blow. The hot liquid from the tank showered the injured employee, who suffered burns to the top of his head and was hospitalized.",1
"An employee was performing electrical troubleshooting on a pump when an arc flash occurred, causing thermal burns to the employee.",1
An employee was using metal shears when the shear amputated his left fourth finger.,1
"An employee tripped and fell to the floor, fracturing his left wrist.",1
An employee was stepping out of an RV to answer a park visitor's question when she fell from the RV steps and suffered deep bruising to her pelvis and hip.,1
"An employee was adjusting the levers on a knuckle boom when the boom came down and hit the employee's mouth and jaw, breaking it.",1
"An employee's feet were run over and crushed by a forklift, requiring hospitalization.",1
"An employee was attempting to fix a switch point that was gaping. His hand was between the switch point and the stock rail when the train moved away and the switch point snapped shut, catching and amputated his index and middle fingers.",0
"An employee was cleaning the threads on a 6-inch hammer union when he lacerated his right middle finger, requiring stitches. The laceration was infected and required hospitalization.",1
"An employee was breaking down an oil saver assembly when his left index finger was smashed between two end joints of tubing, requiring surgery.",1
An employee was climbing stairs when he felt a pop in his knee due to a torn tendon.,1
"An employee slipped/tripped while carrying a tray of food and a pitcher, falling to the floor and fracturing the right hip. The employee was hospitalized.",1
"An employee was using a magnet to lift a steel plate from a table and was wiping water off of it while it was suspended when the power to the magnet shut off. The steel plate then fell on the employee's right hand, amputating the middle fingertip and lacerating the index finger.",0
An employee got into a physical confrontation with a coworker when the coworker struck the employee in the head with an iron rod.,1
A temporary employee was removing the tail from a coil on a conveyor belt when the employee's right index finger became caught and amputated between the coil and the conveyor belt.,0
An employee fell backward in the parking lot and hit his back on the asphalt.,1
An employee was climbing a stationary ladder when he fell and landed on his back.,1
"An employee was helping to move a large, new broiler into a restaurant when he lost his footing and fell. The broiler landed on his hand amputating his index fingertip.",0
"An employee was standing on a ladder when it slipped out, causing the employee to fall to the concrete floor. The employee suffered a fractured left leg and was hospitalized.",1
"An employee was operating a floor scrubber when it ran over his right leg, fracturing his fibula.",1
"An employee was operating a core cutter when the employee's left hand contacted the fixed blade, amputating the index fingertip.",0
"An employee was putting down adhesive for insulation when the employee fell 30 feet from the roof to the ground, requiring hospitalization. Fall protection was not worn at the time.",1
"An employee tripped and fell while descending a stairway, injuring the right ankle.",1
"An employee was wiping dough off of a roller on a rotary machine when his hand and arm were pulled into the roller, fracturing and lacerating them and requiring hospitalization.",1
"An employee tripped over her shoes and fell, fracturing her hip.",1
An employee suffered a back strain while repeatedly bending and lifting products to remove them from a truck trailer.,1
"An employee was driving a flatbed cart when his knee struck a guardrail, injuring his leg and requiring hospitalization.",1
"An employee tripped over a compressor, fell backward to the floor, and broke his left arm.",1
"An employee was placing a tarp on a trailer when he fell to the ground, dislocating his left hip, fracturing his pelvis, and suffering abrasions.",1
An employee was breaking out a stand of drill pipe when the pipe fell on and amputated two of his toes.,0
An employee was troubleshooting an air-reciprocating hand pump and checking for air leaks in the device. The pump started while his left middle finger was in the piston path. The piston then amputated his left middle fingertip. The pump was not locked/tagged out at  the time.,0
"An employee was resting his right hand on the boiler room doorframe when the wind blew the door shut on his hand, amputating the padding of his middle finger.",0
"An employee slipped and fell on the floor, dislocating a shoulder.",1
An employee was trying to clear a jam at the discharge of the auger conveyor and amputated the left leg below the knee. The auger was not locked out or guarded at the time.,1
"An employee was standing next to a banded pile of sheet metal that was sitting on the forks of a parked forklift. The shipping bands broke, allowing the sheet metal to slip off the forks and strike the employee's legs, breaking both ankles.",1
"An employee was talking to a forklift operator when the forklift ran over and broke his foot, requiring hospitalization.",1
"On June 1, 2017, at approximately 4:00 a.m., an employee was about to perform maintenance on an oil and gas down-hole mechanical setting tool. The employee picked up the 70 lb. setting tool to bump it on the ground and release the pressure. The tool was slippery from being covered with honey oil, and the employee's grip slipped. His right middle finger was then crushed and amputated by the setting tool.",0
"On June 1, 2017, at approximately 4:00 PM, an employee was descending from a two-story roof onto a ladder. As the employee climbed from the roof to the ladder, the ladder slid sideways, causing the employee and ladder to fall to the ground. The employee suffered a broken pelvis and two broken vertebrae.",1
"While mowing the lawn on a slope, an employee lost their footing. The employee's right foot went under the lawn mower, which cut a toe.",1
"An employee was placing grooves on a parts machine containing a cutting wheel when his right arm became entangled in the cutting wheel, amputating it below the elbow.",1
"An employee was working at a pie machine when the machine bar came down and pinched the employee's right pinky finger, amputating the fingertip.",0
"An employee was cutting a piece of wood flooring on a table saw when the blade caught the board and pulled his left hand toward the blade, amputating his middle fingertip to the knuckle. The saw was unguarded at the time.",1
"An employee was attempting to stop a truck from rolling backwards into another when his left hand was caught between the two vehicles, seriously lacerating his left thumb.",1
An employee was delivering mail when his vehicle struck a stone mailbox and shattered his right mirror. The mirror glass went into his right eye.,1
An employee was operating a plastic injection molding machine and attempting to retrieve a part when a flap on the machine's tool closed on and amputated her left thumb tip.,0
"An employee was removing the cap on a temporary stand pipe when a pressure buildup inside the pipe caused the cap to fly off and hit him in the face, cutting his upper lip.",1
"On Thursday, June 1, 2017, at approximately 6:55 AM, an employee was performing a change-over on a machine. He was holding a plate inside the machine with his left hand when the machine started and caught his left hand, partially amputating his left middle finger and lacerating his left index and ring fingers.",0
An employee was opening the tailgate to a dump truck when it crushed the employee's right middle finger.,1
An employee was in a go-kart accident and was hospitalized.,1
An employee was using a case floater to spread dry fertilizer on a farmer's field when he came over a hill and hit a washout. He injured his back and required hospitalization.,1
"On June 1, 2017, an employee was spray painting in a compartment aboard a vessel when his spray gun became clogged. As he attempted to clean the tip of the spray gun, the gun discharged paint. The paint broke the skin and was injected into his left palm.",1
"An employee was walking under the suspended boom of a pump concrete truck when concrete slid down the boom, causing it to fall and strike the employee. The employee was pinned to the ground under the weight of the concrete and boom, suffering broken ribs, a broken tibia, a lower left leg injury, and a back injury.",1
"An employee was moving a 200-foot steel cable with a forklift when the forklift tipped over and landed on the employee's left hand, fracturing it and requiring surgery.",1
"On Thursday, June 1, 2017, at approximately 10:00 a.m., an employee was attacked by a patient, who grabbed her hair and pulled her to the ground. She lost consciousness and suffered a concussion.",1
An employee was rolling up a hose after filling a 250-gallon fuel tank when the tank stand collapsed and the tank fell on the employee. The employee fractured 14 ribs and the sternum and suffered contusions on the shoulders and upper back.,1
"An employee was rigging with a chain hoist when the rigging and hoist lacerated and crushed the employee's left thumb, amputating it from the nail to the tip.",1
"An employee was operating a sit-down forklift and transporting large tote bags filled with product to be incinerated. As the forklift was making a 90-degree right turn, it tipped over onto its left side and the employee fell from the driver seat and was pinned under the overhead guard. The employee suffered crushing injuries to the torso and legs including two broken femurs, eight broken ribs, two collapsed lungs, four injured vertebrae, lacerations to the liver, intestine, and vein to lower extremities. The employee's spleen was also removed.",1
"On June 1, 2017, an employee was moving scaffolding frames when they fell on him. He was hospitalized with head lacerations, a punctured lung, and a broken rib.",1
"An employee was working on the front flap of a dock plate when a coworker stepped on the dock plate, causing it to amputate the employee's right middle finger.",0
An employee was walking in the warehouse when a forklift operator struck and broke his right ankle and dislocated his right toe. He was hospitalized.,1
"An employee was looking at the orientation of a sprocket on a rotary machine when his right arm was trapped by a fixture on the machine. He suffered a cut/contusion/bruise on the inside of his arm above and below the elbow, requiring hospitalization.",1
"An employee was picking up a cart with an overhead hoist. While he was rigging it up, a piece of the spreader bar shifted and his left ring fingertip was caught and amputated between the hook and eyelet.",0
An employee was removing a cat from a kennel when the cat bit the employee's left hand. The employee was hospitalized.,1
"On June 1, 2017, an employee was rigging an A/C unit when the unit moved, pinching and partially amputating the employee's finger between the unit and the floor.",0
"An employee suffered a severe allergic reaction to bird seed while conducting an activity with children, requiring hospitalization.",1
"An employee was walking on a makeshift pathway when she tripped and fell, fracturing her right arm.",1
An employee was performing an inspection in the backyard of a house when a dog ran outside of the house. The employee suffered shortness of breath and chest pain. The employee was hospitalized for a heart attack.,1
"An employee was looking for a hydraulic leak on a boom lift when the hydraulic hose burst and injected fluid into the employee's left middle finger and lacerated it, requiring surgery.",1
An employee was attempting to feed film through a jammed sealing machine when it closed on and lacerated his left middle fingertip. His fingertip had to be medically amputated. The machine was guarded and not locked out at the time of the incident.,0
"An employee was unloading a window crate when a window fell and hit the employee, breaking bones.",1
"An employee was installing a wash tray on a printing press when his rubber glove and then hand was caught in the press rolls, amputating two fingers.",0
An employee suffered dehydration while performing road work and was hospitalized.,1
An employee was attempting to connect a dolly to the hitch of a second dolly when his right pinky finger distal tip was pinched and amputated between the two dollies.,0
"On June 2, 2017, an employee was installing a ceiling joist while standing on a ladder and guardrail when the guardrail failed, causing the employee to fall approximately 12 feet. The employee suffered a spleen laceration, abdominal bleeding, and an elbow fracture, requiring hospitalization.",1
An employee was driving a utility tractor when he passed out and struck his head on a hatch cover lid and the inside of the tractor cab.,1
An employee was helping load cattle into a trailer when a cow kicked back and the employee's hand was caught between the gate and trailer frame. The employee's ring finger was severely lacerated.,1
An employee's left ring and pinky fingers were smashed between the top of a tank and a handrail on a gas buster tank. His left ring finger was partially amputated.,0
"While checking an air handler in the attic above a garage, an employee fell through an opening in the attic floor and struck the concrete below, suffering severe head and shoulder injuries.",1
An employee was conducting maintenance on a conveyor that was locked and tagged out when a metal plate that is operated by a pneumatic cylinder closed and caught the employee's left arm. He was hospitalized and had surgery.,1
An employee was clearing a jam from a paddle conveyor when the machine cycled and smashed his left hand. His left middle finger had to be surgically amputated at the first knuckle.,0
"An employee fell to the ground while working from a scaffold, breaking an arm and rib.",1
"An employee was washing a tank trailer while standing on a ladder mounted to the trailer when he fell approximately 10 feet to the concrete floor. He suffered brain contusions and hematomas, a skull fracture, vertebrae fractures, and a right scapula fracture, requiring hospitalization.",1
An employee was scraping a vessel when the employee's long-sleeve shirt was caught in the vessel's rotating spindle. The rotating spindle then broke the employee's right arm in two places.,1
An employee was loading product onto a die machine when it amputated three right-hand fingers.,0
"An employee was changing out bolts and a gasket on a 1.5"" acid line in the acrylonitrile unit. The line was blinded and locked out and the valve was in the open position to the bleeder. When the employee cut the bolt on the flange, trapped pressure between the bleeder and flange caused residual sulfuric acid to spray the employee, causing chemical burns to the left abdomen, left arm, and left lower back.",1
"An employee was loading materials into a vehicle when she slipped and fell, breaking her right shoulder.",1
"On June 2, 2017, an employee was power washing the outside of a building while standing in a man basket on a forklift when the employee fell approximately 10 feet to the ground, suffering back injuries.",1
"An employee was operating a boom lift. While the employee was in the boom lift basket, the basket came into contact with a steel beam, which struck the employee's head and face.",1
"On June 2, 2017, an employee was driving and performing waste removal tasks when he experienced heat exhaustion and was hospitalized.",1
"An employee was helping to transfer a load from a crane to a chain fall when the load shifted and partially landed on the employee's foot, breaking bones and requiring hospitalization.",1
"An employee was performing preventive maintenance on railroad switches and a pressure-actuated rail greaser. He was attempting to reinstall the connecting bar for the greaser. When he picked up the bar from the middle joint, the joint straightened and amputated his left middle finger distal tip.",1
"An employee was walking down an embankment when the employee's foot became caught and an ankle was shattered, requiring hospitalization.",1
"An employee was painting the front section of the first floor entryway of a three-story split plan house. He attempted to access the exterior wall between the first and second floor using a 6-foot step ladder on top of a 3:12 pitched metal roof. He slipped and fell about 4 feet from the ladder onto the metal roof, fracturing his right hip and requiring hospitalization.",1
"An employee was removing a wood utility pole from a hole when the pole slipped. The employee was then caught between the pole and an adjacent truck, suffering a collapsed lung and breaking ribs, an ulna, and a radius. The employee was hospitalized.",1
"An employee and a coworker were working in an electrical room, pushing a ground cable through the top of the main distribution panel, when an arc flash occurred. The employee was thrown 5 feet back from the panel and required hospitalization.",1
"An employee was rolling a 15-foot pipe on a table to coat it with oil when it rolled off the table and struck him in the right knee, requiring surgery.",1
An employee was attempting to reinstall the connecting bar for a pressure-actuated rail greaser. He was picking up the bar from the middle joint when the joint unexpectedly straightened and injured his finger.,1
An employee was cleaning/vacuuming a re-grinder when the employee's left middle finger came into contact with the moving scrapper/paddle and was amputated. The machine was running at the time of the incident.,1
"An employee tripped over a bag on the floor while leaving the cash register area, falling to the floor and suffering a broken hip.",1
"An employee was attempting to light a gas range when a gas cloud ignited, burning the employee's head, neck, and ears. The employee was hospitalized.",1
"An employee fell while putting items away at the head of a hospital bed, dislocating a knee.",1
"An employee was helping a coworker roll a patient to the side to insert a harness for a lift. The employee grabbed the side rail, pushed backward, lost balance, and then felt pain in the back down to the lower left extremities. The employee was hospitalized overnight for a back sprain/strain.",1
"An employee was working on the hull of a ship from scaffolding. When he was lowering himself down from the scaffolding, his ring was caught on the edge of a metal beam, which then amputated his finger.",1
"An employee tripped over another employee's feet and fell to the floor. The employee suffered a hairline fracture, dislocated left knee, dislocated right shoulder, and head bruising, requiring hospitalization.",1
"An employee was helping her mother move from a personal vehicle when the car began to roll back. She ran around the car to attempt to stop it, but either slipped or was struck by the car door and fell down. The tire ran over both her legs and dragged her 15 to 20 feet. She suffered a compound fracture of the left leg.",1
An employee was rotating a 14-inch steel casting pipe on a pipe rack roller when the employee was pinned between the rack and the pipe. The employee suffered a broken left leg and possible left middle finger amputation.,1
"An employee was adjusting a slide seat in an excavator when his right middle finger was caught between the slide seat adjustment bar and the latch behind it, amputating his middle fingertip.",0
A flagger was struck by a vehicle.,1
"An employee tripped over a power extension cord and fell while waxing the floor. The employee's head struck the floor, suffering a possible concussion and musculoskeletal trauma.",1
"On June 3, 2017, an employee was kneeling and using a pneumatic staple gun to secure corners of a prop frame. The employee fired a staple into the wood and it kicked back, causing a second staple to eject from the gun and impale her knee. She was hospitalized and had surgery.",1
"An employee was measuring neutral wire for a new feeder installation when an arc flash occurred, burning the employee's face and hand. The employee was hospitalized.",1
"An employee was shocked with 480 volts of electricity on the left index finger while trying to activate a pump in the pump house, requiring hospitalization.",1
"An employee was returning to his station at a molten lead kettle when a coworker added a sodium hydroxide treatment too quickly to the molten lead, causing it to react and spill over onto the injured employee. He suffered second degree burns on his left foot and was hospitalized.",1
"An employee was descending a ramp off a trailer with a handcart of food when he lost control of the handcart. As he tried to stabilize himself, the handle struck his foot. The ramp then ripped open his shoe and lacerated his big toe.",1
"On 6/3/2017, an employee was working in a trench to erect a retaining wall to insert a large machine. During the work process, the concrete company had to remove the trench walls so that the work crew inside the trench could apply mortar to a pre-set area where the cinder blocks were to be placed. As the concrete crew removed the walls, the side of the trench collapsed and toppled onto the injured employee. He suffered forehead lacerations and bruising and temporarily lost consciousness. He was hospitalized.",1
"An employee lost balance while walking upstairs and fell from the top step, fracturing the right femur and requiring hospitalization.",1
An employee was erecting a pop-up canopy. The employee's left index fingertip was in a rod slot when the inner rod moved and amputated skin and muscle from the finger.,0
"An employee was in a parking lot when a flatbed trailer struck her, knocked her down, and rolled over her legs, fracturing her right knee and left leg in three places.",1
"An employee was removing steel plates to access a trough that contains water residue from boilers when a plate shifted, causing the employee to lose his balance. He slipped and his right foot entered the trough, causing second degree burns on his right foot and lower calf.",1
"An employee was closing a gang box when his left middle finger was caught between the gang box, amputating the distal phalanx.",1
"An employee was putting away clothes when she fell and injured her right hip, requiring hospitalization.",1
"An employee was performing maintenance on a conveyor belt below a bin of coal when a bin broke loose and fell on the employee, who suffered lacerations and broken bones.",1
"On June 4, 2017, at 5:40 p.m., an employee was unloading a patient from the back of an ambulance. While he was holding onto the door of the ambulance, lightning struck the vehicle. He suffered respiratory arrest and lost consciousness, requiring hospitalization.",1
An employee was exposed to hydrochloric acid vapors while hooking up hoses to pump chemicals. The employee became dizzy and required hospitalization. Proper PPE was not worn at the time of the incident.,1
An employee was cutting a plastic roll with a J-knife when the blade cut and amputated the employee's left thumb tip.,0
"On 6/4/17, at 8:55 a.m., an employee was backing up a piece of power equipment in an aisle and turning it when his ankle was crushed between the equipment and the bumper for pallet racking. He suffered a broken leg and was hospitalized.",1
An employee was hospitalized after an arc flash.,1
"An employee was pushing a cart when she fell. She got up, but lost consciousness and fell back to the floor, hitting her head on the concrete. She lacerated her forehead and strained her left leg, requiring hospitalization.",1
"An employee slipped and fell off a step while climbing into the cab of a truck, suffering a broken hip.",1
"On June 3, 2017, at approximately 11:30 a.m., an employee was delivering mail when she felt dizzy and suffered an upset stomach. She was hospitalized for heat stress.",1
"An employee slipped to the ground while tearing down a carnival ride, breaking a leg.",1
"An employee was placing frozen fruit into the freezer section and was using a two-rung step ladder. When she stepped down onto the floor, her right leg gave way and she fell to the floor, breaking her right leg.",1
"An employee was cutting a brick form facade with a demo saw when the blade went down, hit the brick below, and kicked back toward him, lacerating his chest and chin.",1
An employee was bending over to cut a box open when she felt severe pain in her back. She was hospitalized with a protruding disc in her neck and multiple upper back spasms.,1
"An employee was operating a standing reach forklift to load cargo into a rack when he reversed the forklift and drove into/under a rack. He was pinned between the forklift and the rack shelf, suffering muscular bruising.",1
An employee was taking out the trash using a hand truck and trash cart when his finger was caught and fractured in the trash cart.,1
An employee was repairing the steering linkage on a powered industrial truck when a jack gave way and the truck crushed his foot.,1
"An employee was using a table saw to cut wood when the saw kicked back and pulled his hand into the blade, amputating his right thumb tip.",0
"On June 5, 2017, an employee was pushing an empty parts cart out of the welding area when it struck a full cart. The employee's fingers were hanging over the outside lip of the cart and were caught between the two carts, amputating the employee's left ring fingertip.",0
"An employee was going to pick up pieces of concrete that were cut from the building when his foot slipped and was caught between two pieces of concrete slab, breaking his leg. He was hospitalized.",1
"An employee fell while going up a flight of stairs, suffering a lower back injury.",1
"An employee was driving a tractor trailer when it began experiencing mechanical problems. He then opened up the engine liquid coolant cap, and hot coolant sprayed onto his right arm, causing second degree burns.",1
"A temporary employee was operating a machine that converts large rolls of paper into narrow rolls of paper when his hand was caught in a pinch point between the shaft and the upright, amputating his left middle fingertip without bone loss.",0
An employee was installing an A/C unit in an apartment attic and suffered dehydration and chest pains due to the heat.,1
An employee fell inside a meat cooler and was hospitalized.,1
"An employee was walking between a bagger gate and bagger snout of a bagger machine operated by a coworker when the coworker cycled the bagger machine. The mechanical bagger gate then struck and crushed the employee's left leg, breaking it and requiring hospitalization.",1
An employee was jacking up a truck trailer while laying on the ground to replace a tire when the truck moved and pulled the trailer over the employee. The weight of the trailer crushed the employee's chest and abdomen.,1
"An employee was working on a truck. He was going to back it out of the shop when he exited the truck to hook up something beneath it. When he hooked up the wires under the truck, the truck began rolling backwards and rolled over the employee. He was pinned under the vehicle, suffering head injuries and broken bones. The truck was running and in reverse at the time of the incident.",1
An employee was operating a metal cutting band saw while wearing gloves. The blade of the saw caught the glove and then amputated the employee's middle fingertip.,0
"While staging shingles on the roof of a single-story residential house, an employee slipped and fell off the roof along the front of the house. The employee suffered a fractured pelvis and vertebra and was hospitalized.",1
"An employee was attempting to collect semen from a male pig that was in a pen when the pig fell down. The employee entered the pen to help the pig to its feet. The pig then kicked the employee, whose head struck a gate. The employee was hospitalized with a concussion.",1
"On June 5, 2017, an employee was rebuilding a bench cylinder when pressure began building in the cylinder and released. The cylinder then struck the employee in the abdomen and pushed the employee into a locker. The employee suffered internal bleeding and crushing injuries, requiring hospitalization.",1
"While installing cable in an attic, an employee slipped on a joist and fell approximately 15 feet through the ceiling. The employee broke several ribs and punctured a lung, requiring hospitalization.",1
"An employee was changing the bag on a screening vat when the hot water contacted the employee, causing third degree burns.",1
"An employee was watching a load of glass being moved from a delivery truck to his company truck when the load lost its lean, became unstable, and fell. The employee tripped and fell as he attempted to jump out of the way, and a load of glass fell on and broke his leg.",1
An employee was using a setting tool to compress a tube when his left middle fingertip was amputated.,0
"An employee was loading a powerline pole on the back of a digger truck when he fell approximately 4 feet off the truck platform to the ground, striking his head on the concrete.",1
"An employee was feeding wood pieces into a press machine while a coworker was behind the press determining why the air hose was not operating properly. The employee's right hand entered the point of operation, crushing his hand and amputating two fingers.",1
"An employee was installing flashing on a concrete deck floor to waterproof it. The employee leaned on a guardrail while attempting to reach a section of work just outside the balcony guardrails. As he leaned on the guardrail, it gave way and he fell approximately 20 feet to the ground floor, breaking his left wrist and requiring surgery.",1
"An employee was segregating metal at the recycling shop when he cut his thumb with metal shears, requiring hospitalization and surgery.",1
An employee was attempting to clean a mower blade when it amputated his fingers. The mower was running at the time.,0
An employee was folding the mechanical lift on a bus when his left arm was caught in the lift. He injured two tendons in his left wrist and required hospitalization.,1
"On June 5, 2017, an employee was picking up end pieces of lumber behind a 16-inch double-end trim saw and throwing them onto a conveyor that leads to a grinder when the employee's hand contacted the bottom side of the saw blade. The blade cut his pinky finger, which had to be surgically amputated.",0
An employee was reversing a mower when his right middle fingertip was pinched/amputated between the roll bar and a retention wire on a utility pole.,0
"An employee shut the lid on a hopper, then backed away from the hopper on a forklift. At the same time, the employee was holding a rope that was attached to the hopper. The forklift then ran over the rope, drawing it taut around the employee's finger. The rope amputated the employee's right ring finger to the second knuckle.",0
An employee was struck on the head by a falling tree limb while cutting branches.,1
"An employee and two coworkers were working on a malfunctioning vacuum pump when the pump ruptured and sprayed the employee with hot lubricant, requiring hospitalization.",1
An employee was attempting to move a half log with a pickaroon when the pickaroon slipped. The employee's pinky fingertip was then crushed and amputated between the wooden pickaroon handle and a log guide.,0
An employee was walking in the parking lot when he fell and injured his hip.,1
An employee was on a ladder pulling wires for a security system when the extension ladder slipped out from under him. He fell approximately 10 feet to the concrete floor and fractured his left arm.,1
"An employee was using a torch to cut holes into a salvaged hydraulic cylinder when the residual hydraulic oil flashed back and burned the employee's left arm, left leg, right leg, and lower back.",1
"An employee was preparing food and placing rice in an oven when she slipped on grease, fell to the side, and struck her head on the floor. She was hospitalized with a possible concussion.",1
An employee was performing maintenance on equipment while pressuring the unit up to the correct PSI. His hand was on top of the equipment when the air punctured his hand.,1
"On June 5, 2017, at 11:50 AM, an employee was directing a tour of elementary school children and  attempting to retrieve biological samples from the Lackawanna River with a net. The employee dropped the net into the river. While attempting to retrieve the net, the employee fell down an 8-foot embankment and landed in the river, breaking three ribs and four vertebrae. The employee was hospitalized.",1
An employee was removing an empty roll of paper from a spiral when he strained his back.,1
An employee was preparing metal pallets. A ring got caught on a pallet resulting in amputation.,0
An employee was pulling on a V-belt for a cement auger screw when his left pinky fingertip was caught and amputated by the belt.,0
An employee was checking the placement of a wire in a hydraulic crimping tool when the tool was activated and partially amputated her left thumb.,0
"An employee tripped and fell to the floor, breaking her arm.",1
"An employee was holding a pipe level as it went through a machine when he slipped, lost his balance, and let go of the pipe. He tried to straighten it, but the pipe crushed his pinky fingertip between it and the adjacent concrete wall. He was hospitalized and had surgery.",1
"An employee was walking down the stairs carrying a metal door when he slipped and fell. The metal door landed on the employee's right hand, lacerating his ring finger and requiring hospitalization.",1
An employee was doing maintenance work on a projector when he fell from his stepladder and injured his head.,1
"An employee slipped and fell off a ladder, breaking the left leg and requiring hospitalization.",1
An employee was cutting open a metal 55-gallon drum when it exploded and struck him.,1
"An employee was cutting 2x4's on sawhorses when the circular saw possibly kicked back and struck the employee's left ring finger, severely lacerating it and requiring overnight hospitalization.",1
An employee was operating a punch press and caught his arm in the press resulting in an elbow injury.,1
An employee was doing maintenance work on a mower machine when a metal part fell on and broke his left pinky finger.,1
An employee was hospitalized for possible dehydration.,1
An employee was latching tubing with elevators at a rig when his left index finger was caught and smashed between the tubing collar and the handle on the elevator. He was hospitalized.,1
"An employee was unhooking a hosed coupling when some hot oil splashed and burned the left side of his face, requiring overnight hospitalization.",1
"At approximately 6:15 a.m., on June 6, 2017, an employee was stacking steel sub frames when his left hand was caught between two frames. As he attempted to pull his hand out, his left middle fingertip was torn off.",0
"An employee was removing jammed frosting tubs from a line when she lost her balance and fell off the platform she was standing on. She landed on the next platform 3 feet below, suffering contusions, bruises, and a strained hip.",1
"An employee was attaching a piece of plywood to the front of a wooden crate for a stack of marble slabs weighing between 3,500 and 4,000 pounds when the stack fell on and crushed the employee's foot.",1
"An employee suffered overexertion, fatigue, and dizziness after performing training exercises, requiring hospitalization.",1
"An employee was removing a part from a spark changer tool when her hand was caught in the tool's rotating platform, breaking three fingers and tearing skin off the back of her right hand. She was hospitalized.",1
"An employee was working on a conveyor when it started unexpectedly and pinched his finger between the belt and pulley, amputating his fingertip.",0
"An employee was standing on the platform of an electric pallet jack when he saw water/moisture on the ground floor and dismounted the equipment. His right foot was caught between the pallet jack and the wall, and he fell on the floor, fracturing his right foot.",1
An employee suffered a lower stomach hernia while carrying two tires.,1
"On 6/6/17, an employee fell from a roof while performing gutter cleaning activities and was hospitalized.",1
"While placing a tarp over a damaged skylight, an employee fell approximately 19 feet through the skylight to the concrete floor, suffering broken ribs, a bruised lung, a broken collarbone, and a skull fracture.",1
An employee was making bushings at a metal molding machine when the machine amputated half of her right middle finger. The machine was not guarded or locked out at the time of the incident.,0
An employee was attempting to adjust transfer vice clamps while a hydraulic cylinder was in the process of transferring when his right pinky finger was caught between the actuator blocks and amputated to the first joint. The cylinder was unguarded at the time.,1
"On June 6, 2017, at about 11:30 a.m., an employee was dusting on a stairway when he slipped and fell down the stairs, breaking his right foot. He was hospitalized and had surgery.",1
An employee was hit in the head by a paper towel cover that opened as he was trying to dry his hands.,1
"An employee partially erected a scaffold and attempted to use it when he fell off the scaffold and broke his left wrist, requiring hospitalization.",1
An employee was lifting a door and felt pain in his lower left side. The employee suffered a hernia.,1
An employee was moving a sand mixing head when his left hand was crushed between the mixing head and a building support beam. His left index finger was partially amputated.,0
"An employee was feeding wire into a crimp cell when the employee's left hand was pulled through the crimp wheels, amputating a fingertip.",1
An employee was clearing a clogged paddle wheel on a transfer assembly unit when the paddle wheel rotated and amputated his right index fingertip without  bone loss.,1
"An employee was removing the outside dual wheel on a farm tractor to get access to the inner dual tire. The employee had the rear wheel of the tractor raised up with a jack and was using a truck-mounted boom to help remove the outside wheel/tire assembly. After the employee unbolted the wheel and maneuvered it off the axel, the wheel tilted and struck the employee. The employee fractured five ribs, punctured a lung, and suffered a laceration behind the right ear.",1
"An employee was cleaning a paint gun using MEK (methyl ethyl ketone), when the high-pressure stream of MEK was injected into his left palm, requiring hospitalization.",1
"An employee was standing on a pallet set on top of a forklift, which was then raised to reach the store's roof (10 feet above the ground), in an attempt to mitigate water leaking on the store's computers. The employee fell 10 feet off the roof to the ground, hitting the pallet on the forklift on the way down. He fractured an eye socket, his nose, and three ribs, requiring hospitalization.",1
"An employee was using a forklift when its power plug disconnected, causing the forklift to stop suddenly. The employee fell off the side onto the concrete floor and broke her hip.",1
"An employee was taking a wheel out of the Kort nozzle on a boat. The employee was pulling out the wheel using a crane and a come-a-long when waves hit the bottom of the boat and caused the load to shift and land on him, breaking his left foot/ankle and pinching his left ring finger.",1
"An employee was snapping a chalk line on the ground when he dropped the ball of string. He went to grab the ball and slipped on wet pavement, falling and fracturing his right leg.",1
"An employee fell from a mobile scaffold and hit the wooden floor below, fracturing a lower vertebra.",1
An employee was dragging an ice cooler to her car using a metal hook and fell. The employee suffered fractures to her back and hip.,1
"On 6/07/17, an employee was using a tunnel boring machine drill to install rock bolts in a tunnel roof when his right jacket sleeve became caught and began to twist around the drill steel, restraining and breaking his lower right arm.",1
"An employee was removing a sheet of oriented strand board from the floor when he fell 5 feet through a floor hole to an HVAC duct below. He suffered a collapsed lung, two broken ribs, and a broken arm.",1
"An employee was working on a de-energized electrical panel when the panel became re-energized, causing an arc flash that burned the employee's right hand.",1
An employee was aligning bolt holes on the turn table of a shrink wrapping machine when the turntable fell on/amputated his finger.,0
"An employee was moving cows from one pen to another when he became caught between a cow and a post, breaking a rib, puncturing a lung, and suffering a chest contusion.",1
"An employee was feeding boards into a sander when two boards overlapped. As he attempted to reposition them, his right middle finger became pinched between the two boards. When he pulled his finger out from between the two boards, the skin and tissue on his middle finger were removed. Part of his finger had to be surgically amputated.",0
An employee was hand digging a hole when an excavator struck his right leg. His right leg had to be amputated at the knee.,1
An employee was moving a large cart full of water when it fell on and fractured his pelvis (hips) and legs.,1
"An employee was using an electrical drill to install aluminum railings on a second floor balcony when the drill became stuck in the concrete. As he tried to pull it out, he lost his balance and fell about 10 feet to the ground, fracturing his leg.",1
"On June 7, 2017, an employee was removing a slide gate from a ladle when the gate struck him, fracturing his right shoulder and chest area.",1
"An employee fell off a ladder and injured his back, requiring hospitalization and surgery.",1
"An employee was manipulating the alignment bolts on a thermoformer machine when the machine's platen lowered onto his right hand, crushing it and amputating his right pinky fingertip.",1
"An employee was standing outside the entrance of a power house when he heard a loud noise inside. The pressure relief valve of the absorber and the condensation released, spraying hot steam on the employee. He suffered burns on his back and shoulders.",1
An employee was using a saw to cut clay pipes when the saw kicked back and cut the left side of the employee's face.,1
An employee was struck by a customer's vehicle while giving hand signals to another customer who was leaving a parking spot. The employee suffered a broken pelvis.,1
"An employee and a coworker were working on a reverse osmosis system, removing membranes from inside a metal pipe that was removed from the processing equipment. The coworker was pushing the membranes while the employee was attempting to catch them as they exited from the opposite end of the pipe. The employee's finger was then pinched and a portion was amputated between the outside surface of the membrane and the inside of a metal tube.",0
"An employee heard an air handler making a squeaking noise. He shut the unit off and was checking the tension on the belt (motor/squirrel cage) when his left ring finger was caught between the belt and pulley, breaking it in two places.",1
An employee was caring for a feline patient and the feline bit the employee. The employee was hospitalized due to potential infection.,1
"An employee was touching up paint on a fireplace located inside a new home when his extension ladder slipped out from under him. He fell approximately 18 feet to the floor, possibly breaking his leg and hip. He was hospitalized.",1
"An employee was six feet high on an extension ladder replacing siding. When he began to climb down, he lost his footing and fell to the ground, fracturing his heel.",1
"An employee was guarding a trash chute opening as the chute was being dismantled when a contractor working overhead dropped a 2x4, which ricocheted off equipment and struck the employee's arm. The 2x4 deeply lacerated the employee's arm and fractured it, requiring hospitalization.",1
An employee was cleaning a seamer machine when it amputated two of the employee's fingertips. The machine was guarded at the time.,1
"An employee snipped a metal band that restrains a steel coil from unwinding to remove it from the coil. The employee experienced some resistance and pulled the metal band to free it. The metal band held firm and sliced through the employee's protective glove and into his hand, lacerating it.",1
"An employee was trying to grab a wooden component before it reached the end of a conveyor. The wooden component was positioned sideways between slats. As he grabbed the wooden component, it became lodged between slats, and his left ring fingertip was pinched and amputated between the wooden component and metal framework at the end of the conveyor.",1
An employee received an electrical shock while splicing wires under a reception desk.,1
"While operating a press brake, an employee's hand entered the point of operation, amputating two fingers.",0
"An employee was moving a large piece of welded steel (feeder hopper side) off of a sawhorse onto the floor using an overhead crane and chains. After the employee unhooked the chain, the structure fell towards the employee striking his lower right leg and fracturing the tibia/fibula.",1
"An employee was using a table saw to cut wood when a piece of wood became jammed in the blade. As the employee attempted to remove the jam, the blade lacerated the employee's right middle, ring, and pinky fingers. The saw was unguarded at the time.",1
"An employee was setting up a printing machine. He was trying to clean the printing plate with a rag when the machine's roller caught the employee's rag and pulled his right hand into the machine, amputating four fingers. The machine was not guarded or locked/tagged out at the time.",0
"An employee used a crowbar to raise a valve part a few inches when his fingers entered a pinch point. The valve then fell apart, landing on and possibly amputating his fingertip.",0
"On June 8, 2017, an employee was in the field working on a furnace when a flash fire occurred, causing second degree burns to his right arm and face. He was hospitalized.",1
An employee was using a pneumatic tool to cut a gas line when he received an electric shock to his hands.,1
"An employee was clearing a jam on a cigar making machine when his left hand entered the in-going nip point of the conveyor, amputating his left index fingertip from the nail to the first digit.",0
An employee was cleaning a block machine when the employee's left arm became stuck in the machine and was crushed up to the elbow. The block machine was not locked/tagged out at the time.,1
"On June 8, 2017, an employee was holding one side of a manhole cover while a coworker lifted the manhole cover with a crowbar on the opposite side. The manhole cover slipped off of the crowbar hook and fell onto the employee's hand, pinching off the finger pads of his right middle and ring fingers between the manhole lid and lip. His ring fingertip had to be surgically amputated.",1
An employee was removing a block from an extruder vise when the employee's left ring finger was caught and crushed between the block and the vise. The finger had to be surgically amputated.,0
An employee was collecting recyclable materials to store in a salvage trailer when he tripped over pallets on the floor. He fell on the pallets and fractured his femur.,1
"On June 8, 2017, an employee was performing road construction work and fell into a trench and broke his back. He was hospitalized.",1
"An employee was cutting a concrete slab with a gas-powered concrete saw when he lost his grip on the saw. The saw lacerated his chest and left arm, requiring hospitalization.",1
"An employee and a coworker were moving a headache rack when the coworker dropped his side. The employee's finger was then caught between the headache rack and the C channel, amputating the right ring fingertip.",1
An employee was moving a spiral metal sheet when the sheet deeply cut his right wrist.,1
An employee was reaching for parts on a press brake when the machine amputated four digits on the left hand and one digit on the right hand.,1
An employee was cleaning a client's residence and was struck by a folding chair that fell from a height or possibly tripped over a chair and fell. The employee suffered three fractured ribs and a lacerated spleen.,1
"While positioning an aircraft engine part with a crane, an employee's finger was pinned between the part and a table surface.",1
An employee was working near a forklift that was transporting materials. The straps came undone and the material fell onto the employee's leg and fractured it.,1
"An employee's finger was smashed by a pallet jack, partially amputating his right corner finger.",1
"An employee was collecting a horse for horsemanship class when the horse became spooked, side-stepped, and threw the employee to the ground. The employee was hospitalized with a fractured left arm and elbow.",1
"An employee was troubleshooting a solid handling transfer system. He opened an observation port and was attempting to brush away some material from the machine's solid screw feeder when his left hand was caught in the feeder, partially amputating his ring and pinky fingers to the first knuckle. The machine was unguarded at the time of the incident.",0
"An employee was attempting to lock out a pump at an electrical box when an arc flash occurred, causing electrical burns to the employee's hands, arms, face, torso, and back.",1
"An employee was moving a sheet metal press when one of the rollers used to move the press became loose and slid away. The press became unbalanced and fell on the employee, pinning a leg against the floor. The employee's leg had to be amputated.",1
"An employee was operating a lathe machine to sand a brass cylinder when the employee's glove and right hand were caught in the lathe, amputating two middle fingers.",1
"On June 8, 2017, an employee suffered a partial amputation of his left ring finger when a large shaft fell onto his hand.",1
"An employee was attempting to use an air hose to remove debris from equipment when the equipment's conveyor caught the air hose and pulled his arm beneath a guard. His arm broke, requiring hospitalization.",1
"An employee fell to the floor while getting a meal in the cafeteria, breaking an arm.",1
"An employee was climbing a ladder to contact a contractor who was on the roof when he lost his footing and fell approximately 8 feet to the ground. He suffered an open fracture to his lower right arm and right wrist, temporary partial paralysis of both lower limbs, and L1 and L3 vertebrae fractures. He required surgery and hospitalization.",1
"An employee was testing a compressor motor by connecting an extension cord to it when a 480-volt power outlet exploded, burning the employee's hands and requiring hospitalization.",1
"An employee's hand contacted moving parts in a gas-powered sprayer while loading equipment onto a trailer, partially amputating two fingers.",0
An employee was restocking boxes in a storage trailer when he became dizzy. He was hospitalized for dehydration.,1
An employee was walking behind a vehicle when it reversed and crushed the employee between it and a second vehicle. The employee suffered a fractured pelvis and was hospitalized.,1
"An employee was testing for wildland firefighter physical fitness. During the course of the examination, the employee displayed symptoms of a stroke. The employee was transported to the hospital.",1
"An employee fell while walking on a customer's driveway, dislocating her left hip and requiring overnight hospitalization.",1
An employee was attempting to clear a jam on a slotting machine when it partially amputated his right index finger.,1
"On 6/08/2017, at 10:40 AM, an employee was trimming trees when he was shocked, causing burns to his hand.",1
"On June 8, 2017, an employee was inspecting the nailing of roof plywood and the strapping of the rafters. While walking back to the access point, the employee slipped and fell 13 feet to the ground, fracturing his left tibia and suffering a compression fracture to his L2 vertebra. Fall protection was not worn at the time.",1
"An employee was walking around a machine and stepping up and down to various positions to thread sheet film through the machine. He held the edge of the sheet film with one hand and stepped down to the floor from a 20-inch-high platform, resulting in tension on the film. While one of his feet was on the platform and the other foot was approaching the floor, the film in his right hand tore from the sheet. He lost his balance and fell to the floor. As he tried to break his fall, he broke his right arm and dislocated his right wrist when he hit the floor.",1
An employee was working at a car wash when his foot or leg was pinched in a conveyor. He was hospitalized with a broken ankle.,1
An employee was moving a drum filled with chunks of lithium. The employee hooked a drum cart to the drum and tilted it back. The drum lid blew off and struck the employee in the face and upper body.,1
"An employee was operating a dump truck and was trying to level the load by shaking the trailer when the truck bed came down on his arm, breaking and lacerating it.",1
"An employee tripped and fell into a refrigerator, breaking her nose and leg.",1
An employee was walking on top of a bridge beam when he was bumped off by a forklift. He fell 10 feet and injured his right humerus.,1
"An employee was walking up the stairs to go into an attic when the stairs collapsed and he fell one story, suffering a head concussion.",1
"An employee was splashed by hot plastic while changing screen filters on an extruder machine, suffering second degree burns to the forearms and face. The employee was hospitalized.",1
"An employee was operating a forklift to empty equipment into a trailer. When he dismounted the forklift, his right heel was caught on the side of the forklift. He fell to the floor, fracturing his right hip and suffering an abrasion to his right elbow.",1
An employee was checking a valve on a blowout preventer when the position ram amputated his right pinky finger.,0
"An employee was trying to remove sand that was stuck in a jammed sand equipment door. The employee was using a hammer on the door when the door slipped and caught the employee's left hand, crushing the index, middle, and ring fingers.",1
"An employee was rigging up a crane when the employee's right pinky finger was caught in a pinch point between the outrigger cylinder and the outrigger beam, amputating it from the center knuckle and below.",1
An employee was moving a crane pad and amputated the right pinky finger at the first knuckle when it was caught in a pinch point between the outrigger and the cylinder.,0
An employee was handling a tilt wall brace when it lacerated and fractured the employee's left index finger.,1
An employee was changing lights when he fell through the store ceiling and hit his head on the ground.,1
"An employee was opening the first of two plug valves on a blow-down line when a threaded nipple on the de-sander dislodged, causing the iron with the plug valves to strike him. He suffered a 2-inch laceration to the left knee, a small face laceration, a torn MCL in the right knee, and right shoulder tenderness.",1
"An employee was on a 5-foot ladder, removing burnable material from the roof and gutters of a structure threatened by wildfire, when he fell from the ladder to the ground. He suffered an open tibia/fibula fracture to his left leg.",1
"An employee was removing panels from an A-frame when six panels fell on the employee, who suffered a broken ankle.",1
An employee was using the punch press side of an iron worker machine to punch holes out of a piece of steel when his right pinky finger went under the hold-down dog area of the punch press. The press actuated and amputated his pinky fingertip.,0
"An employee received an electric shock while troubleshooting a marinade injector machine. Moisture and water had entered the 220V plug on the side of the machine, causing an instant shock and partial right-side paralysis to the employee.",1
"An employee was bitten by a spider while climbing a tank, requiring hospitalization.",1
"An employee was working in a trench box at an excavation site. When he exited the trench box, he sunk into mud up to his knee, suffering possible muscle trauma requiring hospitalization.",1
An employee was unloading the company vehicle and missed the bumper as he was stepping out falling on his left side. The employee suffered a broken leg and hip.,1
An employee was cutting billets with a propane and oxygen torch when sparks sprayed his left side. His undershirt caught on fire and he suffered second degree burns to the left side of his back.,1
"An employee was standing on the wheel well of a sweeper vehicle. He was checking the radiator water level immediately after shutting the machine down. As he was filling the radiator with water, it began to bubble up, so he dismounted the machine. He landed oddly on the ground and fractured his left leg above the ankle.",1
"An employee had just closed the door to a block mixer when he noticed that the door was not closed tightly. As he re-closed the door, his right pinky fingertip was crushed and amputated between the door and the mixer bin.",0
"On June 9, 2017, an employee was trying to park a high-reach fork truck when the truck rolled and the employee's right foot was caught and broken between two pieces of equipment.",1
"An employee was loading plastic onto the conveyor belt of a machine when the belt became stuck. He was attempting to unjam the belt when his hand was caught between the belt and the rotor, breaking his left wrist and requiring hospitalization.",1
"An employee was loading a mini-excavator onto a roll-back truck when the boom of the mini-excavator swung around, causing the machine to fall off the truck. The employee dismounted the excavator and landed on his buttocks. He tried to get out of the way, but the roll-over protection landed on his right leg, resulting in a compound fracture to his tibia and bruised lower back. He was hospitalized.",1
"On June 9, 2017, at approximately 8:00 p.m., an employee was servicing a front-end loader. The employee was preparing to change an air filter on the front-end loader when the employee's right hand made contact with the alternator fan, amputating the index, middle, and ring fingertips. The loader was running at the time of the incident.",0
"An employee was using a single trim saw to cut 2x4 boards. The machine jammed and the employee turned off the saw. She began cleaning out debris from under it when her left hand hit the still moving blade, resulting in amputation of the left pinky finger and lacerations to three other left-hand fingers.",1
"An employee lowered the lift gate of a truck to unload materials. He was attempting to unfold the lift gate when it slammed back into place and smashed his right pinky between two pieces of steel, amputating it just below the fingernail.",0
"An employee was assisting an electrical contractor with a bus plug when an arc flash occurred, causing second degree electrical burns to the employee's face and right hand.",1
"An employee was inserting a plastic sleeve for some pipe to go through a granite curb stone. He was attempting to straighten the pipe when his left middle finger was caught between the pipe and the granite curb stone, amputating the fingertip.",1
An employee was helping a driver empty a rear-load waste container when the opening became clogged with waste. The employee was dislodging the waste when the lid frame moved and amputated the fourth distal phalange of the left hand.,0
"An employee was filling a company vehicle with gas at a gas station when gas splashed into both of his eyes, requiring hospitalization.",1
An employee was helping two bandsaw operators while they where installing a saw blade. The employee was adjusting the tracking on the bandsaw's right wheel when the operators tightened the tension on the saw blade. The employee's left thumb tip was then caught and partially amputated between the saw blade and the wheel.,0
"An employee was in a trailer helping to unload furniture when his foot was caught in the trailer opening. He stumbled and fell onto the floor, breaking his knee/leg.",1
An employee was standing in the warehouse behind an operational forklift when the forklift backed up and crushed the employee's foot.,1
"An employee had washed a truck in a truck wash bay and was preparing to refuel the diesel exhaust fluid. He stepped into the truck to check the odometer, lost his footing, and fell backward onto the shop floor, fracturing his left forearm.",1
An employee was accessing fiber cable when he was bitten by a venomous snake.,1
An employee was trimming the top of the bead on the tire and was caught between the framework and the tire she was trimming resulting in a fractured pelvis and ankle.,1
"An employee was using a paint gun to apply primer paint when the employee stepped back on a 2x4 and fell backwards. As the employee fell, the gun went off and injected paint into the employee's left hand.",1
"On June 10, 2017, an employee opened a tub of liquid chlorine bleach with pliers and rinsed the pliers in a stream of what appeared to be running water, but was actually disinfectant. The employee then experienced shortness of breath and lowered oxygen saturation, requiring hospitalization.",1
An employee flipped over a beverage cart and broke her ankle.,1
"On 6/10/2017, an employee was repairing a press brake cylinder. He was attempting to line up a pin to marry together the parts when his left index fingertip became caught and amputated between the parts.",1
An employee was tripping steel rods out when a string of the steel rods fell from their vertical position. He was running from the falling rods when his left leg was caught and injured on a cement pad and hardline.,1
"An employee was using a chainsaw to remove trees during a fire when the fuel cap came off the chainsaw. Fuel spilled onto the employee and ignited, causing second and third degree burns to the employee's thighs and buttocks.",1
"An employee was putting boxes away on a shelf using a ladder. On her way down the ladder, she missed a rung and fell to the floor. She broke her left elbow and a left finger, and she injured her left hip.",1
"An employee lost his balance while working on an elevated surface that was approximately 24 inches from the ground, fell and broke his arm.",1
"An employee was building molds in the mold shop, using a handheld circular saw to cut plywood, when his hand contacted the blade, amputating his left index fingertip to the cuticle.",0
"An employee was packaging products into boxes on a conveyor line when the employee's hand slipped between the conveyor belt and a broken guard, de-gloving the ring finger down to the base of the nail which was then amputated.",0
An employee was drilling a hole to install an anchor when he received an electrical shock.,1
"An employee was operating a milling machine when his glove was caught in the rotating bit, fracturing his left thumb.",1
An employee was delivering mail in a delivery vehicle when her finger was slammed and partially amputated in the vehicle door.,0
"An employee tripped and fell over raised flower boxes on the front apron of an outside garden area, fracturing her left femoral neck.",1
"A skid steer operator detached a spreader bar from the skid steer because the bar would not sit flat on the ground. The injured employee started to push the bar when it fell and struck his leg, breaking it.",1
"An employee was loading a refrigerator onto a delivery truck when he lost his balance while the gate was raised and fell to the ground below, rupturing his spleen.",1
An employee was helping to strap and stencil loads of plywood using a strapper when he experienced severe leg and stomach cramps. He was hospitalized with severe high blood pressure due to heat stress.,1
"An employee fell out of a golf cart-type vehicle. The employee's head struck the ground, requiring hospitalization.",1
"An employee was cleaning a motel room and preparing it for the next customer. As she was re-dressing the bed, she backed up and slipped on the bed sheet lying on the floor. She fell and fractured her left hip, requiring hospitalization.",1
"An employee was moving clothing items when the employee's foot was caught in a bag strap. The employee tripped and fell to the floor, suffering a bruised and swollen knee.",1
"An employee suffered an allergic reaction while cutting red onions, requiring hospitalization.",1
"An employee was repairing an 8-burner stove when a valve broke on the stove, releasing gas and igniting the pilot light. The employee suffered burns to the face and arms.",1
An employee was struck by a falling pipe resulting in a left radius fracture.,1
"While replacing a roof, an employee walked by an asphalt lugger. The pipeline burst and sprayed hot asphalt on the employee, causing second degree burns on both forearms and requiring hospitalization.",1
"An employee was climbing a ladder when he missed a rung and fell 14 feet, striking a transformer box and breaking his ribs.",1
"An employee was standing in a hanger, attending a 30-minute meeting, when she collapsed due to a lack of blood flow in her legs. She fractured three bones in her right leg and was hospitalized.",1
An employee was preparing to remove a hook/bottom block from an under-the-hook lifting device when the crane hook latch partially amputated the employee's right thumb.,0
"An employee was emptying a container with an automated side load truck when a bag fell out of the container. The injured employee got out of the truck to retrieve the fallen bag when he grabbed something sharp inside of the bag, amputating his right index fingertip with bone loss.",0
"An employee was getting ready to repair a broken PVC pipe that was dripping water on the floor. He placed blankets in the area to contain the dripping water and then began climbing a ladder to the pipe when he slipped and fell off the ladder, fracturing his hip.",1
"An employee was uncovering bins of raw product for the onion line when a forklift operator backed up and ran over the employee's right foot, crushing it and causing tissue damage. He was hospitalized and had surgery.",1
"On June 12, 2017, at approximately 2:30 p.m., an employee was moving steel coils with a shop crane when his left ring finger was caught between a moving coil and a stationary coil, amputating his fingertip.",0
"An employee was using an angle grinder with a cutting wheel to remove tabs that were incorrectly welded on a metal rack when the grinder hit the rack and came back across his left pinky finger, deeply lacerating it.",1
An employee was securing a 2x4 to the end cap of a shelving rack in the warehouse when the 2x4 slipped and partially amputated the employee's left pinky finger.,0
An employee was removing a shim from the eye opening of an edger when it amputated his left middle fingertip.,0
An employee was sprayed with hot water while draining a tank burning his abdomen and legs.,1
"An employee was unloading a trailer at the dock. As the employee was unloading two wire cages from the trailer, the employee's right ring finger was pinched between the two containers resulting in a fracture, loss of the fingernail and amputation of the fingertip.",0
An employee was walking on the sidewalk when she tripped and fell. She broke her left wrist as she tried to catch herself.,1
"An employee was using a hydraulic clamp to clamp a part into an automated saw machine when the hydraulic clamp moved horizontally and pinched/crushed the employee's left thumb between the clamp and some metal parts, amputating the tip.",0
"An employee fell approximately 10 feet while changing the roof on a shed, hitting the concrete below and breaking the jaw/cheekbone.",1
"An employee was welding on a mud pump when an explosion occurred. A pipe cap blew off and hit his stomach, injuring his spleen.",1
"An employee was struck by a forklift while walking on a loading dock, fracturing the right foot.",1
"An employee was working off an 8-foot step ladder, standing on the sixth step. As he started to descend the ladder, the ladder shifted and he lost his balance and fell to the floor. He landed on his left wrist, causing a severe fracture. He was hospitalized for surgery.",1
"An employee was removing a piece of metal from a roll-off trash container when he lost his balance and fell 4 feet off the container, landing on and breaking his hip.",1
"An employee was operating a cant sorter when the block belt became jammed by a small block of wood that had been trimmed off a cant. The employee was attempting to free up the jammed material when it broke free. The conveyor then pulled the employee's right arm underneath the conveyor belt and roller, breaking it. The conveyor was not locked/tagged out at the time.",1
"An employee was climbing down a step ladder when he missed a step. He tried to grab onto a ceiling tile on the drop ceiling, but it could not hold his weight and he fell to the ground, breaking his hip. He was hospitalized.",1
"An employee was trimming a tree using a pole-saw while inside an aerial lift when the pole-saw contacted an electrical powerline. The employee was electrically shocked and fell 15 feet to the ground, suffering electrical burns, a fractured back, and a collapsed lung.",1
"An employee stepped off a sidewalk curb, tripped, and fell to the concrete, injuring her wrist.",1
An employee was re-webbing a machine when the employee's right middle fingertip was caught and partially amputated between two rollers inside the machine.,0
"An employee climbed a ladder onto an unguarded level below the work level when he became dizzy and blacked out from dehydration and fatigue. He fell about 6 feet onto the concrete below, suffering head injuries, a fractured clavicle, and broken ribs.",1
"An employee was stepping down from a ladder when she fell and struck her head on the floor, lacerating it.",1
"An employee slipped and fell in an area that was being cleaned, suffering a right ankle injury.",1
"An employee tripped over tire chock while walking with a ladder, breaking the left femur.",1
"On 6/11/17, at approximately 5:45 a.m., employee was operating a ride-on order picker in the mezzanine when he struck a pole. His left foot/lower leg was crushed and possibly fractured between the pole and the machine.",1
An employee was machining material on a 54-inch vertical turret lathe when his left arm became caught between the table and the machine. He suffered left arm lacerations and fractures.,1
"An employee was using an overhead double-hoist, 20-ton crane to load a trailer when the material slipped from the chain, landed on the trailer, and spilled to the ground, knocking the employee to the ground and causing him to fracture his left hip.",1
"An employee was attempting to repair an existing clay sewer pipe. He was cutting the pipe with a saw when it kicked back at him, cutting him from the chest to the chin.",1
"An employee was acting as a spotter for a truck driver. They lost sight of each other, and the employee's arm was pinned between a pole and the truck back gate. He received a laceration on his left arm and hospitalized for surgery.",1
An employee fell to the ground while carrying 30 lbs. of potato waste and broke a forearm.,1
"An employee was hiking to fight a forest fire when he developed muscle cramps, dizziness, and weakness due to the extreme heat.",1
"An employee was helping an excavator set a 16-foot steel post. The rigging was removed before the post had been bolted in place. The steel post then fell and struck the employee, who suffered a broken leg and was hospitalized.",1
An employee was removing a radiator cap from a tug after it started to overheat when steam released and burned the employee's left arm.,1
"The employee was cleaning a draft beer line with a draft beer line cleaning solution (Micro Matic Beer Line Cleaner [SDS #BDP-003])
. The pressure from the hose caused the chemical to spray out onto the employee's face. The employee sustained a chemical burn to both eyes on his face.",1
An employee was delivering mail and packages weighing up to 40 lbs. on a route that involved walking and driving when he began to feel the effects of heat stress. The employee was hospitalized for a cardiac event and heat-related illness.,1
"An employee was disassembling a boom truck. During the process, the boom truck moved and the last bolt securing the crane assembly to the boom truck broke causing the entire crane assembly to move. The employee was caught between the outrigger of the crane assembly and the truck fuel tank resulting in a right leg laceration.",1
"An employee was installing a bridging angle to a bar joist while wearing fall protection. He was welding it when he fell 30 feet to the ground, suffering a fractured skull, collapsed lung, and three broken ribs.",1
An employee was stocking product at a store when the employee's finger was caught and partially amputated between two packs of product.,0
"An employee was pressing a pair of pants. As she leaned over to adjust an air vent, her body pressed the actuator button, causing the hot press to come down on her hand. She suffered a third degree burn and was hospitalized.",1
"An employee's right leg was caught between a dolly and a K loader, lacerating and fracturing it.",1
"An employee was unloading a trailer. He did not lower the dock plate because there was a drum too close to the end of the trailer. While stepping from the dock to the trailer to move the drum, the employee fell between the trailer and dock. The drum then rolled onto his leg and crushed it between the dock and trailer. His leg broke and required surgery.",1
"An employee was replacing an empty propane tank on a propane floor buffer. While placing the empty tank in the propane cage, the employee fell to the concrete working surface, injuring the left side of his body and requiring hospitalization.",1
"An employee was climbing an 8-foot ladder at the gallon milk filling machine to take a quality sample when the ladder shifted. The employee fell and her leg was caught between two rungs of the ladder, causing her to swing downward and hit her head on the floor. She suffered a head contusion, a laceration above the right eye, right wrist and elbow contusions, a broken ankle, and a broken toe on the left foot.",1
"An employee slipped and fell in the hallway, suffering a broken hip.",1
"An employee was using a 3-foot pry bar to lift a 3/8-inch piece of sheet of metal to remove the 3/4-inch wooden support blocks from underneath. The 3-foot pry bar slipped while the employee was removing the 3/4-inch wooden block, allowing the sheet metal to drop onto and amputate the employee's left index fingertip.",0
"An employee fell from the tire of a front-end loader while performing maintenance on the vehicle, injuring his back and head.",1
"An employee was on top of a machine, attempting to unjam it. He slipped while climbing down and fell 3 to 4 feet to the floor, injuring his left hip and left elbow.",1
An employee was climbing an 11-step stairway when he felt cramps in his arms and legs due to heat stress. He was hospitalized.,1
"An employee was talking to a client when the client closed a door on the employee's right hand, breaking/dislocating fingers.",1
"An employee was showing a coworker how to flip an empty spool (3ft by 1ft). The spool was on the tip of his steel-toe boot when it slipped off and fell on his right hand, lacerating it and breaking his right middle finger.",1
"An employee was using a pry bar to move a grapple cylinder from a truck bed to a draining container when his left hand was caught between the truck bed and the draining container, amputating his pinky finger.",0
An employee was bending a piece of channel with a bender machine when it amputated his right ring finger. The machine was guarded at the time.,0
An employee was closing a bank vault door when the door closed on an amputated half of the employee's left thumb.,0
"An employee tripped on a fatigue mat and fell, breaking her left hip.",1
An employee was using a band saw to cut metal parts and severed the tip of his left middle finger. There was no bone loss.,0
An employee was placing a section of masonry into a trash cart when the masonry fell on and amputated the employee's left pinky fingertip.,0
"An employee was unloading materials from a trailer. He leaned a table against the wall of the trailer. The table then shifted and fell, striking him in the head and injuring his neck. He was hospitalized.",1
"An employee went to cross over a baggage belt when the belt started to move, causing him to lose his balance. He fell and his foot was caught between the drive motor and pulley guard, fracturing his right ankle.",1
An employee was cutting lumber on a table saw when the blade lacerated his left index finger. The table saw was unguarded at the time.,1
"An employee was walking to each collection location helping to empty recycling and garbage on truck. A woman offered the employee a cold bottle of water. He said sure and she went into a house and brought out a bottle of liquid which the employee drank. He took a sip and immediately started vomiting. The ""water"" turned out to be a diluted mix of bleach and detergent. The employee was hospitalized.",1
"An employee was inspecting a rotary feeder when his hand contacted the moving blender, amputating his thumb tip and his index, middle, and ring fingertips.",1
"An employee was putting PVC pipe together while on a ladder while a coworker held the bottom of the ladder. The coworker let go of the ladder and stepped around the corner to check if the placement of the PVC was correct. The ladder slipped and the employee fell to a cement pad below, breaking a bone above the ankle.",1
"An employee was moving a scissor lift downgrade in a parking structure. He was in the lift in the fully lowered position when he struck an overhead concrete beam with his upper body. He was pinned between the beam and the guardrail of the lift, suffering a fractured jaw and left sinus as well as chest contusions.",1
"An employee was trying to dislodge a jam on the chipper machine when the employee's right hand contacted the blade, amputating a finger. The machine was energized at the time.",1
"An employee was picking up a stone slab to move it onto a cutting table when the slab fell and struck the employee's leg, fracturing it and requiring hospitalization.",1
An employee was operating a sleeve machine when he stepped into a pinch point. He then fell backwards into a pallet of sleeves and injured his left foot.,1
An employee was performing preventive maintenance on a docking mechanism when it dropped. The employee fractured the left ring finger and suffered tendon damage when he tried to catch it.,1
"An employee was struck by an automobile while setting up a work zone, suffering multiple broken ribs, a broken pelvis, several broken vertebrae, and multiple internal injuries. He was hospitalized.",1
"An employee was unloading a crate of marble from a delivery truck. The truck gate fell off during the unloading and the employee fell 4 feet off the truck, fracturing the right pelvis, right elbow, and right ribs.",1
"An employee lost balance and fell into a folding chair. The chair collapsed under the weight and pinched the employee's right pinky finger between the hinge, amputating it.",1
An employee was operating a trencher near a trench when the ground gave way. The trencher and the employee rolled down into the trench. The employee suffered three broken ribs and a chest laceration.,1
"An employee was hanging privacy drapes in a resident room and was on a two-step ladder. She was descending the ladder when she missed a step and fell to the floor, breaking her right leg.",1
"On June 13, 2017, an employee was performing preventive maintenance on an HVAC unit. The employee had loosened the screws from the access panel cover to the air handler and began to wiggle the panel in an attempt to lift it. The cover gave way and struck the employee's left arm, severely lacerating it.",1
"On June 13, 2017, at approximately 12:00 p.m., an employee was cleaning the belt on a machine when his left little finger was caught in the belt, amputating his fingertip.",0
"An employee was hand scrubbing a stainless steel hinged folding product chute when the chute closed on the employee's left pinky finger, fracturing it and amputating the fingertip.",0
"An employee was working aboard a ship when he experienced nausea, cramping, and vomiting. He was hospitalized overnight for heat exhaustion and dehydration.",1
"An employee was using an overhead crane, attempting to lift a weight off a mold, when the hook became caught as he was pushing the up button on the crane. The hook then snapped free and struck the employee's face, crushing it. He was hospitalized.",1
"On 6/14/2017, at approximately 1500, an employee was riding in the rear of a line striping truck that had just completed striping a freeway entrance ramp and was travelling down the freeway to turn around in the median. While the striping truck was slowing down to turn around, it was struck from behind by an approaching truck. The employee in the rear of the truck suffered a fractured leg and thumb and was hospitalized overnight.",1
An employee was picking up a 3 foot x 3 foot pallet to stack it on another pallet during a delivery when he suffered an acute lumbar sprain.,1
An employee's hand was on a chain that guides doors through a double pass trim saw when the chain moved and amputated the employee's left ring and middle fingers.,0
"An employee was using a stand-on commercial mower when the left rear mower wheel went off a curb, causing him to lose his balance and place his left foot on the ground while gripping the speed control handle harder. The mower then ran over his left foot, amputating three toes.",1
"An employee had just put trash into the compactor and stumbled on an uneven floor surface causing the employee to fall. The employee suffered right-side injuries to the hip, shoulder and elbow.",1
"An employee was performing a roll change when the employee's finger was pinched between the roll and a brake bar, avulsing the skin and crushing the fingertip.",1
"An employee was carrying a bin of hot oil when she lost her grip and dropped the bin, which splashed hot oil on her face, neck, and shoulder, causing burns.",1
An employee's left hand was crushed in a pinch point while trying to oil an excavator. The injury required surgery.,1
"On June 14, 2017, an employee was oiling the thumb of an excavator when the employee's hand became trapped between the excavator's bucket and thumb. The employee suffered left hand fractures and lacerations, requiring hospitalization.",1
An employee was operating a tube bender when his right hand was caught in the point of operation. He was hospitalized with a fracture and possible amputation to his right index finger.,1
"An employee missed the last step while getting out of the cab of a truck and fell to the ground, tearing the right quadriceps.",1
"An employee was operating a stand-up forklift. While he was negotiating a turn, his left hand was crushed against a pallet on a rack, crushing and lacerating his left hand with tendon damage. He was hospitalized and had surgery.",1
"An employee was attempting to remove sheets of cardboard from a feed conveyor when he suffered acute lower back pain, requiring overnight hospitalization.",1
"On June 14, 2017, an employee was loading cardboard boxes onto a trailer when the employee became pinned between the load of boxes and the handles of a manual pallet jack. The employee suffered a cracked rib and bruised lung, requiring hospitalization.",1
"An employee was installing decking on a roof when he attempted to cross over to the roof of an adjacent building. He fell approximately 30 feet to the ground between the two buildings, puncturing his lung, cracking two ribs, and shattering a pelvis. He was hospitalized.",1
"An employee was sweeping outside the store past the gas pumps. When the employee stepped off the concrete and into sand, the employee fell and fractured the right ankle on both sides.",1
An employee was using an automated post-form beam saw when it amputated the employee's right thumb and right index finger. The employee was hospitalized.,1
An employee was cleaning a meat slicer when the blade amputated his right thumb tip (no bone loss).,0
"An employee was troubleshooting the air conditioning unit for an electrical panel and removed the filter screen to verify operation of the compressor inside the unit. He contacted a fan blade that was located above the compressor resulting in minor cuts to two fingers. Stiches were not required. While receiving first aid treatment, the employee fainted and hit their face on the concrete floor sustaining cuts to the face, broken teeth, and a fractured jaw.",1
"An employee was cutting a piece of metal with an electric grinder when it buckled, pinched, and the grinder kicked back, striking the top of his hand by his knuckles.",1
"An employee was milling rubber and while lifting the rubber from the pan, his glove became stuck and his arm contacted the hot rubber at 300 °F. The employee suffered third degree burns and was hospitalized.",1
"An employee was terminating an electrical panel. At the same time, a coworker located in a different part of the job site turned on a different panel that was wired incorrectly and energized the panel being terminated, causing a second degree burn to the employee's hand.",1
"An employee was positioning himself to service a machine when his left pinky finger entered a drive sprocket, amputating his fingertip.",0
"On June 14, 2017, an employee was stabbed by a patient wielding a knife, suffering lacerations to the arm, face, and neck. The employee was hospitalized.",1
"An employee fell and fractured the right ankle and left tibia, requiring hospitalization.",1
"An employee was working on a ladder approximately 3 feet in the air painting a doorframe when the extension slipped out and he fell, breaking his ankle.",1
"An employee was working in a stairwell to conduct drywall finishing. The employee placed one end of a plank on the landing and the other end in the rung of an extension ladder and climbed onto the plank. The employee then fell 16 feet to the ground, fracturing the left heel and lumbar spine.",1
"An employee had just climbed up part of an extension ladder approximately 12 feet high when he lost his balance and fell to the ground, breaking his nose and wrist and suffering a concussion. He was hospitalized.",1
"An employee was loading boxes on a conveyor and attempting to remove tape from a carton when the tape became wound around the conveyor roller. When the employee attempted to free the tape, the employee's right hand became entangled and scratched in the conveyor, requiring hospitalization.",1
"An employee was attempting to remove a mirror from an apartment ceiling when the mirror fell on him and cut his arm, requiring hospitalization.",1
"An employee walked onto a residential house porch to deliver mail. As the employee was coming down from the steps, the employee stepped on a stone embedded into the cement causing the employee to slip and fall landing on the left knee, causing an open wound.",1
"An employee was tearing up drywall from a scissor lift when he tried to move the scissor lift closer to the wall. His left hand was on the scissor lift's guardrail when his left pinky was caught between the scissor lift's guardrail and the guardrail housing, amputating his pinky's first joint.",0
"An employee became dehydrated while digging a trench, requiring hospitalization.",1
"An employee was inspecting the blower above a roll-up door while standing in a scissor lift (15 feet high) when a bridge crane struck the scissor lift, knocking it over into a storage rack. The employee fell onto the storage rack and suffered a fingertip avulsion, bruised ribs, and lacerations.",1
"An employee was stocking inventory in the store when she stumbled and fell, suffering multiple fractures to her leg.",1
"An employee was emptying a ribbon mixer and attempting to grab a piece of meat when the ribbon mixer caught the employee's fingers, amputating three fingers at the first knuckle. The mixer was guarded at the time.",0
"While loading a cart with debris and supplies during deck removal work, an employee fell about 20 feet to the ground, suffering a broken hip and wrist as well as a possible orbital fracture.",1
"An employee was lifting and stacking cartons in a non-climate controlled warehouse. The employee felt a strain in a back muscle, and shortly thereafter experienced pain to the degree that he could not continue work. He was hospitalized due to dehydration.",1
An employee was taking a measurement from a rolling chair when she fell to the floor and injured her back.,1
"While exiting a loader, an employee fell approximately 2 feet to a lower level and broke the left wrist, requiring surgery.",1
"An employee was cleaning the deli floors with a water hose when she slipped and fell, breaking her left hip.",1
"An employee was cutting 3/4-inch strips of wood with a table saw when a piece of scrap wood became stuck between the guard and the saw blade. As the employee attempted to remove it, the left index fingertip contacted the blade and was partially amputated.",0
"An employee was using a chop saw when he became dizzy. His left hand was resting on the wood cutting area when the saw was activated via the foot pedal. The saw came down, amputated his left pinky finger, and severely lacerated his left hand.",1
"An employee was descending a ladder with a roll of paper towels when the employee missed a rung and fell to the ground, fracturing the left wrist and left leg.",1
"An employee walked up two steps, lost her balance, and fell backwards, hitting her head on concrete. She suffered head trauma and was hospitalized.",1
"A forklift operator attached a chain around a skid, but the tension was too tight in the chain. The injured employee was checking on the tension when the forklift operator got off the forklift, allowing it to roll forward. The employee's hand was then caught between the skid and chain, amputating the right index finger.",0
"An employee tripped over a patient's walker and fell, fracturing the right femur.",1
"An employee was tightening a belt on an HVAC system when the employee's fingers were caught in a pulley, amputating the right middle fingertip and ring finger above the second knuckle.",0
An employee was cleaning out a grass chute on a mower when the mower blades amputated the employee's right index finger.,1
"An employee was using a machine to cut brushes when the employee's right hand slipped and came into contact with the cutting head, amputating the right thumb tip.",0
An employee was removing film from packaging equipment and amputated the upper portion of the left thumb in the jaws of the equipment.,1
An employee was manually turning the belts on a faulty cracking mill when it suddenly turned on and amputated one of his fingertips. The mill machine was not locked out at the time.,1
"An employee was repositioning a crane when the boom swung free and crushed the employee's left hand between it and the rack pin, amputating a fingertip.",0
"An employee was welding a 10-inch pipe when the jack stand that was supporting the pipe sank into the ground, causing the pipe to strike and break the employee's left femur.",1
"An employee was spraying penetrating oil under a truck when the oil entered his mouth. He suffered chemical burns to his mouth and lungs, requiring hospitalization.",1
Two employees were in a trench attempting to cap off an underground water line. Part of the side of the trench came loose and pushed one employee against the side of the trench. The other employee was stuck in the mud up to his waist. One of the employees was hospitalized and had surgery for broken ribs and a lacerated small intestine.,1
An employee was stepping off a mower when it ran over his left foot and cut it.,1
An employee was using a table saw to cut acrylic glass when the glass kicked back and cut an artery in his forearm. The saw was unguarded at the time.,1
An employee was removing fork extensions from a forklift when a fork fell on his right foot. He was hospitalized and had his right middle toe amputated.,1
"An employee was standing on a scaffold plank along the side of a modular home when the employee fell nearly 7 feet to the ground, suffering a back injury and requiring hospitalization.",1
An employee was gathering work materials and was struck by a forklift that was backing up resulting in injury to both legs.,1
"On June 15, 2017, at approximately 12:00 p.m., a temporary employee suffered a partial left index fingertip amputation while clearing a jammed part on the cutter section of an extrusion line.",0
"An employee closed a security gate on an employee's leg, breaking it.",1
An employee was cleaning a butter machine when it cycled and amputated the employee's left thumb.,1
An employee was de-burring an 8-inch x 2-inch piece of steel with a mounted disc grinder when the grinder amputated his right pinky fingertip.,0
An employee was working at her desk while construction was occurring in the basement parking garage. She was exposed to carbon monoxide and had to be hospitalized.,1
"An employee was clearing a jam on a machine when a coworker re-activated it, causing stored air to cycle the machine parts, which pinched and amputated the employee's left index fingertip.",0
"On June 16, 2017, at 1:30 p.m., an employee was performing auxiliary cleanup work between pour runs when he fell 6 feet off a reclaimer, hit a pipe, and then landed on the concrete slab. He suffered a head laceration, concussion with minor loss of consciousness, broken ribs, and a punctured lung, requiring hospitalization.",1
"An employee was reaching over piping when he lost his footing and fell over the piping. While falling, he used his left hand to break his fall. His hand was then caught and fractured between two pipes.",1
An employee was using a handheld saw to cut a stone countertop when the saw lacerated the employee's right index and middle fingers.,1
"An employee was manually guiding metal blanks (weighing 22 pounds each) from a conveyor to a skid supported by a power pallet jack when the skid broke. The metal blanks then slid off the skid and struck the employee's lower right leg, fracturing it.",1
"On June 16, 2017, at 2:30 p.m., an employee was working in the clinical laboratory when a post-graduation tour came through. She had an intense allergic reaction to a tourist's perfume and was hospitalized.",1
"An employee was grinding concrete while on an extension ladder when the ladder slid out. The employee fell and landed on the ladder, breaking his right ankle.",1
"An employee was working on engine mounts when the jack slipped and the engine fell on the employee's left hand, amputating the pinky fingertip.",0
An employee was spray painting while standing on top of an approximately 8 foot x 15 foot rectangular tank that was approximately 7 feet tall. There were five 2 foot x 3 foot holes cut out of the top surface of the tank that were not covered. The employee fell into one of these holes and suffered a fractured pelvis.,1
An employee was rolling pipe when he became fatigued due to heat exhaustion.,1
"An employee was rolling up wire while cleaning a site when he was bitten by a spider on his leg, requiring hospitalization.",1
"An employee drove a truck to a customer location and was in the back of the truck loading crates of milk onto a wheeled hand cart. While pushing the cart, the employee slipped on a milk/ice cream mix that had spilled onto the floor of the truck. The employee fell forward in the truck with his hands in front of him trying to break his fall. The hand cart rocked back and landed on his right hand, amputating his middle fingertip.",0
"On June 16, 2017, at 4:15 p.m., an employee was calibrating the burners on a furnace when the employee passed out due to possible heat stress/exhaustion, requiring hospitalization.",1
"An employee was sitting in the back of a pickup truck, which had the tailgate down, when the truck moved. The employee then fell about 3 feet to the concrete ground, hitting the back of her head. She suffered bruising and two head fractures.",1
"An employee was walking from one section of the facility to another when he became dizzy and fell to the sidewalk, fracturing both arms.",1
An employee suffered from heat stress.,1
"An employee was searching through a vertical rack of wrapped tempered glass when he lost his footing and fell backwards. The glass fell on top of him, breaking his right leg.",1
"An employee was expanding tubing using a 3/8-inch tubing expanding machine when a bearing bullet broke off in the tube. Pressurized air caused the broken bullet piece to eject and strike the employee's right hand, breaking his index finger.",1
"While walking in the warehouse, an employee tripped and fell over a divider, causing him to displace his hip. He was hospitalized.",1
"An employee was wiping grease from a drive chain on a machine when the chain pulled his right index finger into the drive's pulley, amputating it. The machine was guarded and operating at the time of the incident.",0
"An employee entered an area with a conveyor when a robot sensor activated and pinned the employee between the robot and conveyor, breaking six ribs. The area was guarded at the time.",1
An employee was at the back of a truck loading a small gas cylinder when he fell out of the truck and cracked his hip.,1
"On June 16, 2017, an employee was preparing to replace a drill bit on a multi-spindle drill press when his left ring finger contacted the point of operation and was amputated.",0
An employee was pushing a piece of wood through the blade of a table saw without the use of a push stick thereby resulting in the amputation of the tip of his left thumb without bone loss.,0
"An employee was picking up trash outside when she tripped and fell while going down the steps, injuring her hip.",1
"An employee was carrying a mirror into an apartment building through an interior staircase. As the employee was entering the doorway, the mirror inadvertently hit the doorframe. This caused the mirror to break. A portion of the mirror fell and lacerated the employee's left forearm, severing arteries and cutting two nerves.",1
"An employee was working on a drill rig when the hydraulic jaw crushed both of the employee's hands, amputating the right index finger.",0
An employee was delivering a package and sustained lacerations when he was bitten on the forearm by a dog.,1
"On June 16, 2017, at approximately 10:50 p.m., an employee operating a terminal tractor was preparing to hook up airlines to a trailer. He exited the back door and stepped onto a catwalk made of metal grating when he lost his balance and fell between the catwalk and fuel tank. He fractured his left shoulder and was hospitalized.",1
"On 6/16/2017, at approximately 1100, an employee was pushing a rack up a ramp when a forklift carrying a bin came up behind him. The forklift operator attempted to pass the employee and the side of the bin struck the employee, fracturing his ankle/leg and requiring hospitalization.",1
"An employee was unpinning a stand pipe to reposition it when his knee was trapped between the stand pipe and a substructure, causing soft tissue damage.",1
An employee was operating a self propelled modular transport trailer that had a load and was walking backward when he was caught between the edge of a jersey barrier and the power pack of the trailer. His right leg was crushed below the knee and had to be surgically amputated.,1
"On June 16, 2017, an employee was performing a soil evaluation at a remote work site when he suffered from heat exhaustion and required hospitalization.",1
"An employee was landing a pallet jack that was elevated by a tower crane. As the crane lowered the load into a courtyard where the employee was located, the load struck something and started to swing. The employee's right hand was caught between the swinging load and the aluminum joists, crushing and amputating the ring finger.",1
An employee was helping to remove a mast from a sailboat when the mast separated and three of his fingers were caught and amputated between the mast and another part of the boat.,1
"An employee was performing preventive maintenance on an amusement park ride vehicle. Brake cleaner had been sprayed to loosen parts. He was using a battery powered impact wrench to remove a bumper when a flash fire occurred, causing second and third degree burns to his arm.",1
"An employee was on a ladder performing overhead door maintenance on a torsion bar/spring when the door became unstable. The employee then fell from the ladder to the concrete ground, fracturing the right femur.",1
"An employee was reversing a truck down a road after offloading cargo when the truck wheels fell off into a ditch, causing the truck to overturn. The employee suffered two broken ribs, a broken shoulder blade, and a bruised lung.",1
"On 6/17/2017, an employee was installing vinyl siding from a ladder when he felt dizzy and fainted. He fell approximately 10 feet from the ladder, breaking several ribs and his spine.",1
An employee was shot on the right calf by a patient in custody who had taken a police officer's gun after he was treated in the emergency room. She was hospitalized.,1
An employee tripped over a bed and fractured her hip.,1
"An employee was welding and constructing a steel cage from six 1,400-pound steel plates. He was guiding a steel plate from a forklift into position when the chains holding the steel plate slipped off the forklift forks and the 5' x 5' steel plate broke his right leg.",1
"An employee was walking to a container berth dock when he was struck from behind by a jockey truck. He suffered a separated right leg calf muscle, requiring hospitalization.",1
"While starting a press, an employee contacted the blade, suffering a laceration that required surgery.",1
An employee was replacing a magnet on a faulty pump when his left middle fingertip was pinched and lacerated between the magnet and the pump. He was hospitalized and had surgery.,1
"An employee was helping to move blasting pots when a pot fell on the employee's left hand, amputating fingertips.",1
"An employee was picking tomatoes when a snake bit her right hand, requiring hospitalization.",1
"An employee was reaching to remove product from the top shelf of a dairy cooler that was malfunctioning. She was stepping onto the front ledge of the cooler for a better reach when she fell approximately 1.5 feet, hitting her head on the ledge or the floor.",1
An employee was cleaning the farrowing building when she was bitten by a rattlesnake on the left pointer finger while picking up a bag of afterbirth.,1
An employee slipped on a workplace floor and fractured her pelvis.,1
"An employee was using vise grips while changing out components and wiring to an elevator when the vise grips failed, allowing the components to fall and catch the employee's left thumb between the cable and a sheave. The employee's left thumb tip was amputated.",0
An employee was cleaning an assembly line and attempting to remove a piece of meat from a running conveyor belt when his left hand was caught between the chain and sprocket on the belt. He suffered several lacerations to his left hand and wrist. The conveyor was not locked out at the time.,1
An employee was exposed to hydrochloric acid vapors while operating a blender.,1
An employee was descending a fixed caged ladder when he missed the top rung and began to fall. He grabbed onto a vertical member of the cage assembly to catch himself and caught his right pinky in a 1/2-inch gap between the upright and a toe board section. His right pinky fingertip was amputated.,1
"An employee was moving square tubing and cutting the banding around the tubes. When he cut the last piece of banding, the metal tubing shifted and fell over onto his right leg/ankle, breaking it.",1
An employee was working on a pump when the brake was released and the plunger smashed his left wrist and first knuckles.,1
"An employee was working at the restaurant when an assailant entered the establishment and struck her in the face, breaking her jaw.",1
"An employee was unloading a cart of laundry from a truck down a ramp when he slipped and fell between the truck and the building. The cart fell on top of him, and he suffered lower leg contusions.",1
"An employee was struck by a dock lift while stepping off a long jack, injuring the left leg.",1
An employee was helping to pick up lumber from an overturned 18-wheeler on the interstate. The employee was standing on a bundle of lumber when the load shifted and catapulted the employee 4 to 6 feet in the air. He landed on and injured his neck.,1
An employee was using a 2-foot step stool to reach a gate key pad that was malfunctioning to repair it when he fell off the step stool and sustained a left wrist fracture. He was hospitalized and had surgery.,1
An employee was hit by a beam while walking between a saw and a roller cable at a jobsite. The employee suffered a broken pelvis.,1
An employee was working with an acetylene torch when the hose blew off the torch and struck the employee in the groin.,1
"While standing on an extension ladder to reach a light diffuser, an employee lost balance and fell to the ground, fracturing ribs.",1
"At 2:00 p.m., on June 19, 2017, an employee was exiting the restroom when her fifth fingertip was caught and amputated between the doorframe and the self-closing door as she attempted to keep the door from slamming shut.",0
"An employee's hand was caught between a turret spindle and ejector plate on a press, fracturing the wrist.",1
"An employee fell off a roof suffering a head injury, multiple left-side face fractures and pain in his left shoulder. He was hospitalized.",1
"An employee was adjusting the height on a conveyor when the conveyor moved downward, pushing his upper body/head down. His right eye was pushed into the corner/edge of a cardboard box, causing a contusion/inflammation that required overnight hospitalization.",1
"An employee was working in the dryer building area stacking units of veneer plywood with a forklift. The employee got off the forklift to place timbers between the stacks of veneer. In the process the employee's right index finger was pinched and smashed between the timbers and the forklift forks, requiring hospitalization.",1
An employee was moving a steel I-beam when his index and pinky fingers were caught and smashed between the I-beam and a roller bed.,1
An employee experienced tightness in the chest and was disoriented during his mail route. The employee was hospitalized for heat stroke.,1
"An employee was lowering a 3-inch pipe used as a guiderail for a lift pump when the crane cable broke below the cable clamp and above the cable eye. The pipe became unsecured and fell on the employee, lacerating the upper arm.",1
"An employee and coworkers performed lockout/tagout procedures on a dryer rotary feed to clear a clogged plug. The employees cleared the plug and began to run the dryer, but the plug had not been placed back into the dryer. The injured employee was pointing to the rotary feed to remind the lead person to put the plug back in when the rotary feed amputated his right index finger from the fingertip to the bottom of the nailbed.",0
An employee was stacking materials on a horizontal panel saw when the saw blade amputated the employee's hand.,1
"An employee was changing the bearing on a tilt belt when the employee's right hand contacted the belt, partially amputating the pinky finger. The belt was operating at the time.",0
"On June 19, 2017,around 6:45 p.m., an employee was adjusting a paper tubing machine when his left hand was caught and lacerated between two rollers. He was hospitalized and had surgery.",1
An employee was reversing a compact utility loader when it struck a forklift outrigger that was moving in the forward position. He suffered a left leg fracture and right calf laceration.,1
"An employee was setting up a press brake and changing from a short die to a long die. While he was holding the lower die partway into position, the press brake was activated via the foot pedal. The lower die then slid fully into position, taking his hand with it. The press brake moved to the setup position and crushed his left hand, breaking his middle finger and dislocating his index finger. He was hospitalized and had surgery.",1
"An employee was driving a truck and trailer to move stock soil when the truck and trailer rolled over. The employee suffered right shoulder, head, and right leg injuries.",1
An employee was shearing sheet metal with a hydraulic shear when the employee's left hand went past guard and the material hold-down. The material-hold down crushed and partially amputated the employee's left pinky fingertip.,0
"An employee was stepping over a hose when he tripped and fell, landing on his right side and breaking his right hip.",1
An employee suffered a broken shoulder after tripping and falling onto a same level walking-working surface.,1
"An employee was shocked while working on a light fixture and fell approximately 9 feet from the extension ladder he was on, fracturing his right wrist and right ankle.",1
"On June 19, 2017, an employee was loading a reel of wire into the back of a pickup truck when the employee's right pinky fingertip was caught and amputated between the reel and the truck bed.",0
"An employee was loading lumber into a dry kiln. There were 4x4 timbers on the ground for the units of lumber to be stacked on. A forklift brought in lumber and one of the 4x4's moved. When the forklift backed out, the employee went between the stacks of lumber to properly position the 4x4 timber. The forklift driver came into the kiln area with a load and the employee was caught between two stacks of lumber, suffering transverse fractures to the right-side L1-L5 vertebrae.",1
"On June 19, 2017, at 11:00 p.m., an employee was driving out of the facility parking lot when an unknown assailant from outside the facility drove into the parking lot and shot the employee in the head through the back window of his car. He was hospitalized.",1
"An employee was skinning hams on a pedestal skinner. As he pushed down on the end of the ham, his hand rolled over and the skinner caught the top of his right hand, avulsing it. He was wearing the correct PPE at the time.",1
"An employee was standing on a chair to change the monitor screen view. As the employee was getting down off the chair, her foot got caught and the employee fell fracturing the right hip.",1
An employee was picking up trash on the roof when he stepped back and a coworker's nail gun released a nail into the back of his right ankle.,1
"An employee was tightening a valve nut when the hydraulic action of the fluid inside the valve forced the valve shut. The valve closed on the employee's left ring finger, amputating the finger pad (no nail or bone loss). The valve's safety pin was not in place at the time.",0
"An employee was installing low voltage (120 volt) controls in a junction box when he received a shock. As he pulled his hand away, the tendons were lacerated by a galvanized steel strap, requiring hospitalization and surgery.",1
"An employee was loading pipes onto a trailer when his left hand was caught between a pipe and the trailer, injuring his thumb and his index and middle fingers.",1
An employee was measuring and cutting wood on a table saw when the saw blade amputated his pinky fingertip and cut his ring finger.,1
An employee was installing glass in an interior window frame when the glass lacerated the outside of his right hand across the knuckles.,1
An employee climbed on a wood telecommunication service pole and was doing repairs when the pole broke. The employee fell to the concrete below and suffered a fractured elbow.,1
An employee was cutting pork chops with a meat saw when it amputated his right thumb tip.,0
"An employee fell 5 feet from a ledge while delivering a pizza, breaking the right lower leg.",1
"An employee was cutting wood with a table saw. As he pushed the wood through the saw, it amputated his left thumb at the joint.",0
"An employee was clearing the scrap from a hydraulic shear after trimming a customer-requested metal sample. His left hand was in the area of the shear blade when the shear fired, amputating his left index and middle fingertips mid-nail.",0
"An employee stepped onto a buffing machine to reach an object. When she stepped down to the floor, she fractured her right foot.",1
"An employee hit the emergency stop while operating a prime mover. The equipment stopped abruptly, and the employee fell to the floor. The employee's head struck the ground, requiring sutures and hospitalization.",1
An employee was clearing a jam on a roller when his left ring finger was pinched and amputated by the roller.,0
An employee was casting concrete forms and suffered heat stress.,1
An employee began feeling ill and sweating profusely while building a shipping crate. The employee then passed out due to dehydration and was hospitalized.,1
"On June 20, 2017, an employee was getting ready to unload a truck for recycling when a stack of partitions started to fall and was going to hit him. To avoid getting hit by the partition stack, he jumped off the truck and landed on a hospital table, breaking his left knee.",1
"An employee was stepping off a walkie when it pinned him between the skid it was carrying and a nearby rack, injuring his lower right leg. The walkie had not come to a complete stop at the time of the incident.",1
"An employee was standing on the sidewalk supervising children at play. A child approached the employee and attempted to hug her. The employee was surprised, lost her balance, and fell to the sidewalk, breaking both femurs. She was hospitalized and had surgery.",1
"On June 20, 2017, at approximately 5:00 p.m., an employee was clearing brush with a chainsaw when the chainsaw made contact with the employee's left forearm, resulting in a severe laceration and hospitalization.",1
"An employee was climbing up an attic ladder when he fell about 5 feet backwards and struck his head, sustaining head trauma. He was hospitalized.",1
"An employee was attempting to drain a 4-foot wide and 4-foot tall tank that had an open lid that was missing a counterweight. The tank was being moved into place by a forklift. When the employee instructed the forklift operator to lift the tank, the lift caused the lid to close. The employee's left hand was positioned near the opening, and the closing lid smashed the third and fourth fingertips of the employee's left hand. The fingertips had to be surgically amputated.",0
"An employee was attempting to move a cart that contained blades for a machine because it was blocking an aisle when a blade fell off and struck the employee's foot, amputating two toes.",1
"An employee was placing a tag line on a concrete pole as the pole was being moved. The employee was trying to get out of the way when his right leg was caught between two concrete poles, breaking his right femur.",1
"An employee slipped and fell more than 10 feet off a ship's ladder, landing on the ground and suffering an injury.",1
"An employee was operating the lift gate on a delivery vehicle and unfolding the lift gate platform when it became stuck. The employee reached up with his left hand to pull the platform downward. The platform unfolded and caught his left pinky finger in a pinch point, amputating the fingertip.",0
"An employee was injured while jumping out of the way of a load of steel that was falling from a crane after a stacker crane backed into it. The employee suffered a head injury that required stitches and contusions to his arms, body and legs.",1
An employee suffered a right index finger amputation to the first knuckle while operating a stuffer machine.,0
"An employee was sanding the rough edges of a concrete wall while standing on a yard trailer platform when the employee tripped and fell approximately 4.5 feet to the ground, suffering a head injury and requiring hospitalization.",1
"On June 20, 2017, an employee was working on a pipe while standing on skids stacked on the pipeline. The employee was closing the valve on the pipe so it could be tested for leaks when the skids shifted and the employee fell. The flange of the pipeline hit the employee's right foot, amputating it from the ball of the foot forward.",0
"An employee fell 14 feet while engaged in steel erection activities, suffering a broken pelvis. Fall protection was not worn at the time of the incident.",1
"An employee was performing maintenance work on a wood packaging line to fix a portion of plastic that was stuck when his left middle finger was pinched between the machine basket and a metal bar frame, amputating it above the first knuckle.",0
"An employee fell approximately 10 feet from a ladder while scraping soybeans from the wall of a grain bin, suffering fractures and neck and back injuries.",1
"An employee was putting a frame together and was making a cut on a table saw with a dado blade when the blade lacerated his left thumb, requiring hospitalization.",1
"An employee had boiled asparagus and was draining the hot water off of it into a kettle. The kettle was not locked and the water spilled onto her feet, causing burns on both feet, including second degree burns on her right foot.",1
"An employee was standing on a pallet on a forklift that was raised 10 feet to retrieve material from a shelf when he lost his balance and fell to the floor, suffering a broken neck vertebra, broken rib, and head laceration. He was hospitalized.",1
An employee was reaching over a shelf when his left ring finger was caught and severely lacerated on the top of the shelf support. His finger had to be surgically amputated.,0
"An employee drove his cement truck to a site to deliver concrete and was closing the truck door when his left index finger was caught between the door and the body of the truck, partially amputated his left index finger.",0
"An employee was using a pump sprayer containing a mixture of water and chemical cleaner to clean the condenser coils on an air conditioner condensing unit. After spraying the chemical mixture, the employee placed the sprayer wand on the ground next to him. The wand then sprayed the cleaning mixture onto his pants, causing chemical burns to his lower left leg that required hospitalization.",1
"An employee was moving a piece of equipment from one machine to another using a jib crane when the crane disengaged from the concrete and struck the employee in the shoulder, breaking the shoulder blade.",1
"An employee was helping to change out a punch tooling die when the punch ram moved and crushed the employee's right hand, amputating the middle and pinky fingers.",1
"On June 20, 2017, at 11:30 a.m., an employee was assisting a client with a bath in the client's apartment home when the ceiling above him caved in. The employee was struck in the head and injured by falling debris.",1
An employee was operating the band oven when the extruder began malfunctioning. She was attempting to fix it when the extruder amputated her right index fingertip.,0
An employee was operating a machine when his middle fingertip was caught and amputated between two moving steel plates.,0
"An employee was cutting a long scrap tube when the cut tube rolled off the horses it was sitting on and contacted his leg, breaking the tibia.",1
An employee's left and right thumbs were pulled into a gear on a conveyor. Both thumbs were fractured and lacerated.,1
"An employee was spraying bushes with a spray applicator. The equipment malfunctioned. While troubleshooting the equipment, the employee amputated the middle fingertip in the pulley and fan blade.",1
"On June 20, 2017, at 12:50 PM an employee was exiting an attic using a ladder after installing cable. The employee fell and suffered an lower back injury and was hospitalized.",1
"An employee was installing a wireless system and cutting a strand of wire when he fell 10 to 12 feet off his ladder and hit the ground, potentially breaking vertebrae and suffering blood clotting in the head.",1
An employee was using a rivet machine to repair scaffold components when the machine amputated the employee's left index fingertip.,0
"An employee was picking up a metal part with an overhead crane magnet. He placed the magnet on the side of the part and attached the crane hook to the magnet. As the part was being lifted, the magnet released it. The part fell and struck the employee on his left foot, breaking it.",1
"An employee was changing the blades on a machine and using a knee switch to hold open the pocket where the blades were located. The employee's knee slipped off the switch, allowing the blades to amputated the employee's right ring fingertip.",0
"On June 21, 2017, at approximately 2:45 p.m., an employee was removing a 4-inch water valve from a line when the employee's right pinky finger was pinched between the valve and pipe, amputating it just above the first knuckle.",0
"An employee was cleaning around a conveyor and attempting to remove a diaper that was underneath it when the employee's right hand entered the ingoing nip point of the belt and gear, amputating the ring fingertip and lacerating the other fingers.",0
"An employee was working on a regional jet truck when his left ring finger was crushed between a safety hard stop and the frame of a catering box that fell, separating the finger skin from the bone.",1
"An employee was lighting an oxy-propane torch when a leak allowed a flame to propagate up the employee's arms, burning them.",1
The employee was putting away his tools when the toolbox lid closed on his left pinky finger resulting in amputation.,1
"An employee was in a freezer cleaning up frozen peas that had ammonia trapped in them due to an earlier valve leak. As he shoveled the peas, the liquid in the peas expanded to vapor and he inhaled ammonia, suffering labored breathing and loss of consciousness. He was hospitalized.",1
"An employee was rigging some 2-inch manifold piping near a well head when some of the piping tipped and struck the employee's lower left leg, causing a compound fracture.",1
"While lifting sheetrock, an employee felt a pop in his right calf muscle. He suffered a blood clot.",1
The employee applied fertilizer at 25 to 35 different work locations throughout the day and was treated for heat stroke.,1
The washout cap located on the top of the trailer was loose. The employee got on top of the trailer to tighten it. Pressure had built up on the washout cap and it popped causing the employee to lose balance and fall off the top of the trailer resulting in two broken legs.,1
"An employee was operating a machine that converts plastic film into bags. The employee was attempting to adjust the plastic when his right hand was caught between the machine's heat sealer and cutter, amputating his right index finger from the first joint up to the fingertip.",0
"An employee experienced a muscle injury while transferring a prisoner from one room to another, requiring hospitalization the following day.",1
"An employee was transporting hot oil in a waste container by hand to a waste bin outside when the hot oil spilled onto the employee's torso, arms, and legs, causing burns that required hospitalization.",1
"An employee was installing wooden guardrails around a newly cut stairway opening with a coworker on the second floor when part of the floor collapsed. The employee fell approximately 10 feet to the first floor concrete flooring, fracturing the left shin and injuring the right knee and back.",1
An employee was using a wrench to rotate a pipe when the wrench amputated the employee's right middle finger.,1
"An employee was attempting to track a conveyor belt when he tripped. His right hand came down on the moving conveyor belt, amputating his right middle fingertip to the first knuckle.",0
An employee was attempting to cut a zip tie on an HVAC water hose with a pocket knife when the knife slipped and stabbed his left forearm.,1
"An employee was on a forklift platform, installing butyl tape on a metal building, when the employee fell approximately 22 feet to the ground. The employee suffered clavicle fractures, a head laceration, broken ribs, shattered vertebrae, and a spinal cord injury.",1
An employee was taking a photograph from a ladder that was approximately 8 to 10 feet high when he fell to the floor and broke his lower right tibia.,1
"An employee was cleaning up a lay-down yard when a pressurized CO2 bottle valve discharged, causing him to lose his balance and fall. He hit and cut the back of his head and suffered shoulder pain, requiring overnight hospitalization.",1
An employee's fingertip was amputated while he was operating a saw.,0
"An employee was attaching skid steer forks to a truck when the forks fell off and landed on the employee's foot, causing a possible fracture to the foot/ankle that required surgery.",1
"An employee was attempting to move a portable light tower for transport. She had raised four outriggers and had the connector beam (tongue) on the hitch of the truck that she was connecting the light tower to for transport when the portable light tower and the connector beam (tongue) fell onto her foot, fracturing two toes.",1
"On June 21, 2017, at about 10:15 A.M., an employee was working from a forklift work platform. While the forks were being lowered to the ground, the employee's right hand was caught between the mast and the backrest of the forklift, partially amputating the middle and ring fingers.",0
"An employee was unloading a bundle of steel angle iron from a parked trailer in the shop delivery area using an overhead bridge crane. He was using the crane's hand pendant controller to control the crane's operation to lift the bundle of steel off the flatbed trailer and to lower it next to the trailer. At some point during the lowering operation, the wrong button was pushed on the pendant controller and the load swung and struck him in the chest while he was standing between the trailer and the swinging load. He suffered a punctured lung and broken rib(s).",1
"On June 21, 2017,an employee was connecting two trailers with a converter dolly. The employee attempted to lift the dolly and suffered a back injury.",1
"An employee was inside an excavation that only had one side sloped to grade and the other side was 9 to 10 feet high. Part of the excavation's high wall collapsed and struck the employee. The employee sustained a broken left metatarsal, humerus, and vertebrae.",1
"An employee was run over by a concrete truck after pouring concrete, puncturing the employee's liver and injuring the left ankle, right hip, and five right-side ribs.",1
An employee was setting up a straightener and loading a steel bar into it when his left glove became wrapped around the bar. Two digits on his left hand were amputated.,0
An employee was trying to dislodge a sliding fence when his left middle fingertip was caught and amputated between the roller and the top part of the fence.,0
"An employee was riding in a company golf cart as a passenger when the driver made a sharp left turn and the employee was thrown to the pavement, striking the back of his head. He suffered a laceration, fractured skull, and damaged inner left ear.",1
"The employee powered down an air handling unit. While it was slowing down, the employee removed a motor guard when it slipped onto the belt/sheave below, making noise and beginning to burn the belt. As he attempted to move the guard, the belt pulled his left fingers into a pinch point, partially amputating the middle finger and crushing the index finger. The machine was not locked/tagged out at the time.",0
"An employee was struck by a motorist as she walked to her car in the jobsite parking lot, suffering severe bodily injuries.",1
An employee was cleaning blended material out of the bottom of a blending machine and was wiping the interior bottom drain when the machine blades amputated the employee's fingers. The machine was running at the time.,1
"An employee was delivering a metal plate at a customer's jobsite when the customer dropped the metal plate on the employee's right thumb tip, amputating it.",0
"A temporary employee was operating an electric forklift to move stacked pallets of cardboard boxes. During travel, he stopped his forklift, got off, and attempted to manually push the stacked pallets. One of the pallets then fell on top of him, injuring his neck and/or back and requiring surgery.",1
"An employee was unlocking a digester that had been shut down for maintenance. As he was conducting the unlocking procedure, an automatic valve was in the open position, allowing the digester acid to drain through the drain valves and thereby causing the release of sulfur dioxide. He suffered respiratory irritation from sulfur dioxide exposure and was hospitalized.",1
"An employee was fixing a sprinkler head while standing on an A-frame ladder when the leg of the ladder slipped on the vinyl flooring. The employee then fell from the ladder, hitting a window sill and then the floor. He injured his vertebrae and was hospitalized.",1
An employee fell from an A-frame ladder while installing a vending/fountain machine line that ran along the ceiling area. The employee fractured two ribs and suffered a severely separated shoulder on the left side.,1
"An employee was unloading forgings from a furnace to the floor where they were placed on rails using an overhead crane and lifting chains. As the employee was unhooking the lifting chains from the forgings on the rails, the chain hook became caught on the rail. The employee used a metal bar to attempt to free up the chain hook. When the chain hook was freed, the hook swung back and came into contact with a metal wedge that is used to keep the forgings in place on the rail. When the wedge was moved out of position, one of the forgings shifted and pinched the employee's lower right leg between two forgings, burning his lower right leg just above his boot.",1
"An employee was driving a tug tractor when he collided with a truck, pulling his groin muscle and lacerating his calf.",1
"An employee passed out while working on an oil and gas rig due to a combination of heat stress, dehydration, and blood sugar issues.",1
"On June 22, 2017, an employee was working on an asphalt crew shoveling and raking asphalt. The crew made different stops during the day and at one stop the employee began to feel ill. The employee was hospitalized for heat stroke.",1
An employee's right index fingertip was pinched and amputated between moving conveyor gears as the employee was applying grease to them.,0
"An employee was holding a concrete form plate with his hands when he was struck by an impact hammer, amputating his left index, middle, and ring fingers.",0
An employee was working on a crank line when his right ring finger was caught on a stop that was on the track of the line's sliding drawer. The 60-pound drawer then ran over and amputated his right ring finger.,0
"An employee was walking down an embankment to move a railcar when his foot slipped on wet grass and he fell on his knee, fracturing it and tearing ligaments.",1
An employee fell and broke his leg.,1
An employee was troubleshooting a conveyor system problem when the jump chain transfer amputated the employee's left pinky fingertip.,0
"An employee's fingertip was crushed between a part and the fixture holding the part, requiring surgical amputation.",0
An employee was working with a tank flipper when his right middle and ring fingers were crushed and amputated between two pieces of equipment.,1
An employee was removing freight from the back of a truck when a forklift entered the back of the truck. The vibration from the forklift caused a bar to fall and strike the employee in the head.,1
"An employee was pulling down a truck door when his left ring finger was caught in the door, amputating the soft tissue.",1
An employee broke a leg while stepping off a catwalk.,1
"An employee was on a rolling ladder moving a fan that was on a rack system when he lost his balance and fell 4 feet, breaking a heel.",1
"An employee was filling a tank on a utility vehicle with a 2-inch hose in preparation to spray a field when the hose separated from the fitting, causing the employee to lose his balance and fall to the ground. He fractured his hip.",1
"An employee was spraying overhead pipes with water when she stepped into an uncovered drain trough and fell, suffering a possible right foot dislocation and fractured ankle/foot.",1
"An employee was collecting residential trash when he fell to the ground behind the truck, suffering a concussion and requiring hospitalization.",1
"An employee was cutting wood with a miter saw when the wood kicked out, causing his left hand to contact the saw blade. His hand was lacerated and fractured, requiring hospitalization and surgery. The saw was guarded and proper PPE was worn at the time.",1
"An employee opened an energized PMH (large electrical box used for power transmission) to verify tags and labels and an arc blast occurred. The employee received first and second degree burns to his right arm, arm pit, shoulder, ear and neck.",1
An employee was operating a hydraulic press when the press stock support collapsed and lacerated his left elbow. The press was unguarded at the time.,1
"An employee was making a gutter when the knife he was using became stuck. When he tried to remove the knife, it cut his left thumb. He was hospitalized the next day for surgery.",1
"An employee was trying to corral steer into a trailer when a steer came through a steel pipe fence and struck the employee, who suffered a broken lower left leg.",1
"On June 22, 2017, at approximately 10:30 a.m., an employee fell approximately 5 feet from the work platform of a scaffold to the ground. On the way down, the employee's leg became caught in a ladder rung and suffered compartment syndrome, requiring hospitalization.",1
"An employee was unloading a truck trailer when his right hand slipped off the trailer and he fell to the ground, breaking his left arm and fracturing his shoulder.",1
"While working on a reel, an employee's right ring fingertip contacted a sprocket and was amputated.",0
"While responding to a call of a suspicious party, an employee fell into an open grate hole and suffered a right shoulder tear that required surgery.",1
An employee was parking a vehicle when a door bounced and struck his eye.,1
"An employee was operating a handheld grinder when the wheel broke and pieces of metal struck the employee's right eye, requiring hospitalization.",1
An employee was using a hoist to tighten a guy wire for repair when his hand slipped off the hoist handle and the hoist hit him on the right side of his face. He suffered lacerations to his face and eye area.,1
"An employee had been lifting boxes and placing them into a cart for 5 hours when she strained her back, requiring hospitalization.",1
"An employee was pouring concrete when concrete entered his boots, causing a chemical burn that became infected.",1
"An employee was on a truck's lift when the employee's left leg was caught between the truck and the lift gate, lacerating the foot. The employee was hospitalized.",1
"An employee was emptying trash when his hand was caught between a nearby door and doorframe, amputating his left middle fingertip.",0
"An employee was on an orchard ladder trimming the lower branches of a tree with a chainsaw when he slipped and fell approximately 3 feet to the ground. The chainsaw lacerated his hand, requiring surgery and hospitalization.",1
"An employee was in a hole leveling gravel when one of the sides of the hole partially caved in and struck the employee, breaking his leg.",1
An employee was bitten on the right calf by a spider while working at a drilling rig.,1
"An employee's hand was crushed between a forklift and scaffold frame, injuring his right index and middle fingers and requiring surgery.",1
"An employee became overheated while delivering mail in hot weather, suffering dizziness, nausea, and vomiting.",1
"An employee was using a bending machine to roll tubing into a circle when the feeder caught his glove and right hand, amputating his right index finger.",0
"An employee was sitting in a golf cart after doing landscaping when he started shaking, foaming at the mouth, and was disoriented. He was hospitalized due to heat-related illness.",1
"An employee was standing on and dismantling a mobile scaffold when the scaffold tipped over and the employee fell to the floor, breaking an elbow and femur. The employee was hospitalized.",1
"An employee was using an air chisel to chisel coal ash from the inside of a chute when a piece of ash fell from the chute and struck the employee's left hand, causing a 3-inch laceration.",1
"An employee and coworkers were trying to hold down a combative patient when the employee collided heads with a coworker, requiring hospitalization.",1
An employee had one foot on the dock and the other on a trailer and was attempting to open the trailer door when he fell and lacerated his right shin.,1
"An employee was framing a stud wall on the second floor when he fell approximately 15 feet to the first floor lobby, suffering head trauma.",1
An employee was inflating a large tire when the inner tube exploded. The employee's left arm was fractured as a result of the explosion.,1
"An employee was moving a metal container with a coworker when the coworker slipped, causing the container to move. The employee's right index fingertip was then caught and amputated between the metal container and a second container.",0
An employee fell off a ladder while installing a fiber optic cable line to a residential building.,1
"An employee was operating a reach truck to restock shelving with pallets. While reversing the truck, the employee struck a shelving crossbeam with his left shoulder, breaking it and requiring hospitalization.",1
An employee was guiding a corner of a frame of the platform. The employee dismounted from the roll line frame to the ground 3.5 to 4 ft. below and broke his left leg.,1
"On June 23, 2017, an employee was tying rebar when he developed a blister that became infected, requiring hospitalization.",1
"On June 23, 2017, an employee was attempting to adjust the rails on a paint line when a robotic gantry loading mechanism struck him in the back and bent him over the machine, where a static centering handle pierced his upper right chest.",1
"An employee drove a stand-up straddle truck toward a table to get ear plugs. The employee tried to stop the powered industrial truck three times, but it did not stop and ran into the table. The employee suffered six broken ribs, a fractured clavicle, slightly bruised liver, and a 10 percent collapsed lung.",1
"An employee was pushing a loading cart into an autoclave when the cart's movable legs became unlocked, causing the legs to retract and the cart to fall and strike the employee. The employee suffered a broken tibia.",1
"An employee was troubleshooting an edge-bander that had been experiencing operational issues due to an air leak when the employee contacted the trim blade, which was still powered and moving. The blade amputated the first knuckle of the 1st, 2nd, and 3rd digits on the employee's right hand.",0
"On June 23, 2017, at approximately 6:30 a.m., an employee was prepping plywood to be cut on a panel saw. The employee's finger was pinched between a bundle of plywood and rollers on a roller bed, amputating the right index fingertip.",0
An employee was bending to pick up a box when he felt a sharp pain in his back and blacked out.,1
"An employee was disconnecting his truck trailer and pulled the fifth wheel handle. When the handle released, his right arm jerked back and popped. He suffered a torn muscle in his upper right arm and developed compartment syndrome, requiring surgery and hospitalization.",1
An employee was walking into the cafeteria when she slipped on spilled liquid and landed directly on her right knee fracturing her right patella.,1
An employee was operating a wood clipper machine when his hand entered the point of operation. The machine cycled and amputated his right middle and ring fingers. The machine was guarded at the time.,0
"An employee fell from the second rung of a ladder while changing ceiling tiles, fracturing the right ankle.",1
"An employee was walking around the job site and stumbled. When he did, he twisted and his left femur snapped resulting in a fall to the ground.",1
An employee was cutting on a vertical stone surface with a chop saw. The chop saw kicked back and the guard struck/lacerated the employee's face.,1
"An employee was operating a track burning machine when he suffered burns to his legs and hands, requiring hospitalization.",1
"An employee was standing by the side of a road, signaling a truck out from a site, when a car struck him and broke his left leg. He was hospitalized.",1
"An employee was trying to lift a dock plate when a truck backed into the dock plate gate, pinching his left ring finger in a gate hinge and amputating his fingertip.",0
"An employee was clamping a piece of metal to a shear clamping device when his right middle finger was pinched between the clamping device and table, partially amputating the fingertip.",0
An employee was vacuuming a pool when he leaned over and his leg broke.,1
"An employee attempted to force a dock plate open with his hands because the container chassis was pinching the dock plate. The plate then opened and pinched his right index and middle fingers, amputating the fingertips.",1
"An employee was cleaning out his vehicle, slipped, and fell out of the vehicle onto his right side.",1
An employee was using a reach truck to store material on a rack. The employee was standing on the forklift and the employee's left foot was caught between the frame of the forklift and the rack resulting in a crushing injury. The left foot was surgically amputated.,1
"On June 24, 2017, at 2:00 p.m., an employee tripped over a hanger rack while leaving the women's locker room and fractured her hip.",1
"An employee was physically struck by a co-worker after a verbal confrontation. The employee fell and struck his head on the concrete floor, requiring hospitalization for a concussion.",1
"On June 24, 2017, at 10:50 a.m. an employee was attempting to reinstall a conveyor belt that had slipped of its tracks when his finger became caught in the moving belt and the roller, amputating his right ring fingertip.",0
"An employee was using a manual slicer to slice a cucumber. When she repositioned the cucumber, her left index finger hit the blade, amputating the fingertip. The blade was guarded at the time.",0
"An employee was inspecting the tracks of a bulldozer. When he placed his hands on a slit fence, his left forearm was bitten by a poisonous water moccasin. He was hospitalized.",1
"An employee was electrocuted while working on an actuator, requiring hospitalization.",1
"An employee slipped and fell on a wet spot on the floor, breaking both bones in her lower leg and requiring hospitalization.",1
An employee suffered heat stress and dizziness after operating a machine that uses heat and steam to dry out paper.,1
An employee was riding in a golf cart to a work site. The golf cart hit a bump and the employee was ejected. The employee broke a leg upon impact with the ground.,1
"An employee was removing a box of lobsters from a shelf when his feet became tangled in shrink wrap on the floor, causing him to fall and fracture his right hip.",1
"While demolishing an overhead door, an employee loosened bolts to the bracket holding the spring that helps lift the overhead door. The spring was un-sprung and still had tension. When the bolts were removed, the spring sprung, causing the bracket to spin and strike the employee. The employee suffered left arm lacerations, left thumb and finger fractures, a broken right arm and thumb, and multiple right arm lacerations.",1
An employee was adjusting a stop on a small hydraulic press when the press activated and amputated the employee's left middle fingertip.,0
An employee was cleaning the palletizer from the back side. The employee's left pinky finger was crushed between the conveyor cross beam and a pallet resulting in a partial amputation/avulsion. The palletizer was not running at the time.,0
"An employee was exiting the side door of the patient area of the ambulance when the door closed on his left hand, amputating his left ring fingertip.",0
"An employee fell off an 8-foot ladder while changing a ceiling filter, injuring his back and head and requiring hospitalization.",1
"A temporary employee was gathering products to be placed on a pallet jack when he walked to another aisle and was hit by a forklift, lacerating his foot. He was hospitalized.",1
"An employee was walking to the lobby from the kitchen when he slipped and fell, fracturing his pelvis. He was hospitalized.",1
"An employee was exiting his vehicle when his shoelaces were caught on the brake pedal. He then fell to the ground, fracturing two ribs and puncturing his spleen.",1
"On June 25, 2017, an employee was exiting a material handling unit when the employee's foot was crushed between the body of the unit and a steel storage rack. The employee suffered a broken left ankle and was hospitalized.",1
"An employee fell from an 8-foot A-frame ladder, suffering a skull fracture, rib fractures, a vertebrae body compression injury, and a chest cavity injury.",1
"An employee had been working on a bottle-making machine in a hot plant when he suffered dehydration, muscle fatigue, and other heat stress symptoms, requiring hospitalization.",1
"On June 25, 2017, at 9:30 AM, an employee sustained a hernia while pushing a cart.",1
An employee was using a saw when his thumb contacted the saw blade. The blade partially amputated his thumb.,1
"An employee was unloading a padder from a trailer when the padder flipped and ejected the employee. He suffered a punctured lung, facial fractures, and a dislocated shoulder, requiring hospitalization.",1
An employee was bitten by a copperhead snake on the right index finger.,1
"An employee was operating a blender when cheese became caught in the blender's discharge door. He was attempting to unjam the cheese blockage when a coworker noticed the blender was in the fault state and reset the fault, causing the blender to run while the employee's hand was in the discharge door. The blender crushed the employee's right hand, breaking and lacerating it. The blender was not locked/tagged out at the time of the incident.",1
"An employee was installing a gas turbine inter-stage seal ring. He was hand tightening a bolt when a coworker moved the seal ring by contacting a chain fall, causing the seal ring's sharp edge to contact and de-glove the employee's right index fingertip on the pad side.",1
"An employee was installing a pipe on an air handler when a butterfly valve flew off the 120 psi pressurized line and struck his left shoulder, armpit, and chest, causing burn-like injuries.",1
"An employee was providing a residential interior flea treatment when the employee slipped on a wet floor and fell back onto a stair tread, suffering a lower back injury.",1
An employee was putting a piece of concrete in a dumpster when it slipped and crushed his left ring finger between it and the edge of the dumpster.,1
"An employee was guiding material through rollers when the employee's welding glove and left hand were pulled into the roller pinch point, amputating the left thumb and index fingertip.",0
"An employee was operating a forklift when an empty beer keg he was moving started to fall off. As he attempted to grab it, the keg lacerated his right middle finger.",1
"An employee was cleaning the patio area when she slipped on ice and fell, fracturing her left hip and requiring surgery.",1
"An employee was on an extension ladder (approximately 8 feet up) testing a phone port on the ceiling when the ladder slipped out from under him and he fell to the ground, breaking his vertebrae and crushing a disc in his lower back. He was hospitalized.",1
"An employee was wrapping PVC material on a rolling table when her right hand was caught between the table core and the material, amputating her fingertip.",0
"An employee was removing a low-speed pin bracket during a main bearing replacement. When the bracket came loose, it swung and caught the employee's left middle fingertip between it and the bearing, amputating his fingertip.",0
An employee was changing his forklift battery when his right thumb was caught and detached between the forklift and battery.,1
"An employee was driving a fence post and caught the left ring finger between the ""T"" post driver and the post, amputating the fingertip.",0
"An employee was installing plywood on a second floor when he stepped backward and fell into a stairway opening, bruising a rib.",1
"An employee was walking toward the company vehicle when he noticed that there was oxygen gas venting on the side of the van. He opened the tri-cock valve to bleed the pressure down from 120 PSI, opened the doors to vent the van for about 5 minutes, and then closed the doors. As he walked across the parking lot, he lit a cigarette lighter, which caused a flame to ignite on his left shirt sleeve. He suffered second and third degree burns to his chest and underarms, requiring hospitalization.",1
"An employee was exiting his car when he stepped on a spray can and fell, breaking his ankle.",1
An employee fell approximately 12 feet while attempting to set a gable truss. The employee suffered a broken hip and wrist.,1
"An employee was removing straps from a load of 18"" pipe in a trailer. The employee was pulling a release strap from the passenger side of the trailer when one unsecured pipe rolled from the top of the load and struck the employee's head and neck, causing a contusion.",1
"An employee was changing out a blast hose on the underside of a pot when someone recharged the pot, causing blast media to discharge from the lower port and strike the employee on the right side of his face. He suffered an abrasion and blunt trauma to the face from blast grit under pressure. Some of the blast grit was embedded in his facial skin. He was hospitalized. All required PPE was worn at the time of the incident.",1
"An employee was cleaning out a machine near the outside corner of the building when he was struck by the rear tires of a work truck driven by a coworker, suffering multiple torso injuries.",1
"An employee was helping a forklift lift a door when the door became dislodged from the lifting straps and fell on the employee's right leg, breaking it.",1
An employee's foot and ankle were crushed and fractured between an electric pallet jack and a guardrail.,1
An employee fell and broke a leg after a patient fell on the employee.,1
"An employee was removing wood from a double-head notching machine when the machine's blade amputated the employee's left middle, ring, and index fingers.",0
"An employee was using a cart to load material (head stones) onto a trailer with a coworker when he lost his footing and tripped, causing the cart to tip over. His right ring fingertip was then caught and amputated between the cart and the floor.",0
"An employee was on a 10-foot ladder, sealing ductwork, when the ladder slipped. He fell approximately 6 to 7 feet to the floor, suffering possible fractures to the jaw and left wrist.",1
"An employee was cleaning plastic from a warehouse floor when he lost his footing and fell backward over a pallet, fracturing his left hip and femur.",1
An employee was removing a clog from a tail gate when the employee's left finger was caught between the tail gate and the latch pin. The finger had to be surgically amputated.,0
"An employee was placing a roll of wire onto a bracket when the bracket broke. The roll of wire fell and pinched the employee's left little finger between it and a guardrail, amputating the fingertip.",0
An employee was climbing a ladder and fell resulting in a broken leg.,1
An employee was standing on a 6-foot step ladder disengaging a door when he fell to the ground and fractured his right tibia.,1
"An employee was shocked while pulling an electrical cable, suffering electrical burns to the legs.",1
"An employee was installing ladder racks along a hallway when he tripped into a 12-inch deep open floor tile on a raised floor. He fell forward and his forearm struck an uninstalled metal track, lacerating it.",1
"An employee was pushing a cart in a grocery store when she tripped over a watermelon bin and fell to the floor, injuring her left shoulder and arm and requiring hospitalization.",1
"An employee was troubleshooting an air conditioner on top of a roof when the top of the employee's right hand contacted the fan, lacerating it.",1
"An employee was operating a concrete gunning machine when it became clogged. He placed the gunning machine on its side and was using compressed air to unclog the cement when the machine's hose whipped and struck his left leg, breaking his fibula and tibia.",1
"At 12:00 p.m., on June 26, 2017, an employee was removing a piece of steel from a hydraulic saw vice when the saw vice activated and closed on his left hand, pinching it between a piece of steel and the vice jaw. His left index, ring, and pinky fingers were lacerated, and his index finger had to be amputated near the second joint.",1
"An employee was walking down steps when she fell and fractured her ankle, requiring hospitalization.",1
An employee was troubleshooting the valve on dryer equipment when the valve amputated the employee's right index fingertip.,0
"An employee was descending a ladder from a roof when he lost his footing and fell 4 feet to the ground below, fracturing his right ankle and requiring hospitalization.",1
"An employee was cleaning the blade on a grinder. When he manually rotated the blade, his finger was caught between the blade and the base knife, amputating his fingertip.",0
"While on an extension ladder removing a cable drop, an employee fell approximately 12 feet off the ladder to the grass below, suffering a spiral fracture of the left tibia.",1
"An employee was removing a chuck from a CNC machine. The chuck spun around and struck the employee's pinky finger, amputating it.",0
"On June 26, 2017, at 11:30 a.m., an employee sustained cuts and a partially amputated finger while clearing a jam on a band edging machine. The guard was in place at the time.",0
"An employee was counting pipe for inventory. The pipe was blocked by super sacs. The employee climbed onto the super sacs to access the pipe to count it. While trying to climb down off the super sacs, the employee slipped and fell onto his left knee fracturing it.",1
"An employee was loading concrete onto a temporary barrier on a flatbed truck. While turning to exit the stairs of the trailer bed, the employee fell approximately 4.5 feet to the ground, fracturing the right wrist and right clavicle.",1
"An employee was moving a compressor out of a building using a dolly when the dolly tipped, causing the compressor to slide off and crush the employee between it and a nearby fence. The employee's leg broke in three places.",1
"An employee was riding an ATV, made a turn and rolled off the ATV. The employee suffered a heat-related illness.",1
"An employee was checking a non-woven fabric machine when he dropped a pad between two rollers. As he attempted to retrieve the pad, his left hand was crushed and fractured between the moving rollers. The machine was unguarded at the time.",1
"On June 27, 2017, a temporary employee was lifting the glass top of a coffee table when it slipped and lacerated his right arm. He was hospitalized.",1
"An employee was cleaning his agitator truck with a hose when his foot hit a lever that activated a gate. The gate swung and pinched his right forearm, causing abrasions and pressure buildup in his right hand. He was hospitalized and had surgery.",1
"Employees were pouring concrete footings for a support on a second story school expansion. Two employees were using a concrete buggy to dump concrete. While they were raising the dump into position, the buggy tilted forward and tipped into the footing excavation. The injured employee was pinned between the buggy and excavation wall, suffering left arm and leg fractures.",1
"An employee was changing a light ballast while standing on a self-supporting ladder when the employee fell off. The employee's head hit the ground, requiring hospitalization.",1
"An employee went to the passenger side of a truck and leaned the double-step fabric glass ladder against it. As he climbed the ladder, he fell backward and hit the curb. He suffered a bruised right shoulder, knot on the head, bruising and bleeding around the brain, a broken big toe, and a possible spine fracture.",1
"An employee was removing a jammed stack of folded paper drape sheets from a folder machine when the belt moved, pinching her index and middle fingers between the belt and sprocket. Her index fingertip was partially amputated and middle finger was fractured.",0
An employee was attempting to manually adjust the position of a wall hanging fan when two of her fingers entered the cage and were struck by the metal fan blades. She suffered lacerations and a partial right ring finger amputation.,0
An employee was using a scalpel to perform a bedside debridement when the scalpel stabbed the employee's left middle finger.,1
"On 6/27/2017, at approximately 6:30 a.m., an employee was operating a drill press when his right glove was caught in and wound around the bit. His right ring fingertip was amputated.",0
An employee was moving a pipeline reducer from one dock to another dock when he slipped and fell. His right index finger was caught and crushed between the pipeline reducer and the concrete walking surface. It had to be amputated at the first knuckle.,0
"An employee was reversing a forklift when his hand was caught between a rack support beam and the overhead cage of the forklift, requiring hospitalization and surgery.",1
"An employee was checking a clog or jam while purging a tortilla masa pump when his left hand entered the pump opening and contacted the impellers, amputating his left ring fingertip and part of his index finger.",0
An employee suffered a right middle finger amputation while opening a trailer door and working with a dock plate.,0
"While removing a glass insulator from a substation, an employee made contact with an energized conductor and suffered an electric shock.",1
"An employee was moving a chop saw when he contacted the trigger and activated the saw, which was still plugged in. The saw blade then amputated his left ring finger to the first knuckle.",0
An employee was stressing post tension cables using a stressing machine when his right fingertip was caught and amputated in the machine.,0
"An employee was operating a conveyor that produces bathroom tissue rolls. During the production process, the conveyor became misaligned and required adjustment. The employee was trying to make the adjustment when his right finger contacted a push plate (part of the conveyor belt) and was caught between the plate and the conveyor housing. His fingertip was amputated.",0
"An employee was pulling a gang box when the lid of the box closed on the employee's right hand, amputating a fingertip (no bone loss).",0
"While installing plywood sheathing on top of floor joists on the main floor of a house, an employee slipped and fell 10 feet onto the basement's concrete floor, suffering a collarbone injury.",1
An employee was performing maintenance on equipment when the equipment's fan amputated his right pinky finger. The equipment was energized and unguarded at the time.,1
"A temporary employee was attempting to remove a jammed filter bag from a plastic welding machine when his right forearm was caught between the machine carriage and a cross member, severely puncturing it and requiring hospitalization. The machine was running at the time of the incident.",1
"An employee was walking when she tripped and fell backwards over a bench, striking the back of her head against the concrete floor.",1
"An employee was feeding boxes into a machine when one of the boxes tore. She was trying to retrieve the torn box from the machine's conveyor when she lost her balance, twisted, and fell to the floor, injuring her left hip and requiring overnight hospitalization.",1
An employee was hammering plywood at an outside construction site when he lost his vision and fainted. He was hospitalized due to dehydration.,1
"After marking holes in a field, an employee became dizzy, fainted, and vomited due to the heat. He suffered from dehydration and an acute kidney injury.",1
"On June 27, 2017, an employee was standing on a ladder pulling on a wire that was stuck when it broke free, causing him to lose his balance and fall 8 feet to the ground. He broke his right hip and ankle, requiring hospitalization.",1
"An employee was installing a satellite dish on a residential home. He was working from a ladder when he fell approximately 10 feet, breaking his left leg and requiring hospitalization.",1
An employee was packing seed with a metal rod when the rod struck an electrical line and he was shocked.,1
"On June 27, 2017, at approximately 8:45 a.m., an employee attempted to stop a forklift from rolling by placing a piece of wood or hammer under the tire. The forklift continued to roll and pinched two fingers on his right hand, amputating his ring fingertip.",0
"An employee was working underneath the elevated rear-end of a crane when the crane rolled and crushed him, fracturing his arm, foot, and ribs and lacerating his bladder. There were no chocks or jacks in use at the time of the incident.",1
"On 6/28/2017, at approximately 7:45 a.m., an employee was cleaning the screen of a plastic extruder when his right index finger was caught and amputated between the screen and the heat collar.",0
"An employee was assembling an equipment dolly. The dolly table was not stabilized and the rocker beam slid off when the table shifted. The rocker beam struck and crushed the employee's foot, which had to be partially amputated at the hospital.",1
"On June 28, 2017, an employee was changing out a 10' piece of pipe when he opened the pipe and hot water sprayed on him. He received 1st and 2nd degree burns to the forehead, neck, shoulders, arms, elbows, and wrist, requiring hospitalization.",1
"An employee was using a propane welding machine, set at ground level, while standing in a scissor lift inside an empty room under construction when the employee experienced headaches, dizziness, nausea, and fatigue due to carbon monoxide exposure. These symptoms developed slowly over approximately five hours.",1
"An employee was backing up a forklift. His hand was on the overhead rail when he struck a cage and overhead pipe guard. His right hand was caught between the overhead rail and the pipe guard, amputating his index finger at the middle knuckle.",0
"An employee was manually pulling a baggage cart, using the hole in the cart tongue to guide it to a baggage tug hitch, while a coworker was pushing the baggage cart from behind. As the baggage cart tongue came into contact with the tug hitch, the employee's left hand was caught between the tongue and hitch, amputating the pinky finger at the root of the nail and lacerating the ring finger.",0
"An employee was moving a steel beam and using an overhead crane to set the beam down onto the workstation. As the beam was lowering, it started to tilt toward the employee. The employee used both hands to stop the beam from coming toward him. The beam then fell onto the ground, striking the employee's thigh and breaking his ankle.",1
An employee was loading a 5-7/8 pipe on pipe racks when the pipe rolled off the rack and crushed the employee's leg and knee.,1
An employee had taken a nap inside his truck cabin when he suffered a severe headache and grogginess due to possible carbon monoxide exposure. He was hospitalized.,1
"On June 28, 2017, an employee was MIG welding near a fan when a weld spark ignited his shirt. He suffered burns to his hands, back, and right arm.",1
"An employee was installing a label on a power pole when he contacted a powerline jumper and was shocked, suffering electrical burns that required hospitalization.",1
"An employee was installing a switch to a pole when his hand contacted an overhead powerline and an arc flash occurred. He suffered a first degree burn on his chest and second degree burn on his back, requiring hospitalization.",1
"An employee was preparing packaging reels for slitting when reels that had been recently cut rolled off a table and struck the employee, fracturing the hip.",1
"An employee was coming out of the back of a delivery truck. He stepped on the lower bumper of the truck and slipped, falling approximately 2 feet to an in-ground scissor lift and fracturing facial bones. He was hospitalized for surgery.",1
An employee was using a manual sign post driver to drive a sign post into the ground when his left hand slipped off the handle and his left ring finger became caught between the sign post and the post driver.,1
"An employee was breaking down a scaffold when he lost balance and fell 12 feet to the ground, bruising his knee and injuring his head. He was hospitalized.",1
"An employee climbed up the side of a wheeled cart to retrieve a car door that needed to be shipped. When he lifted the car door, the rolling cart moved and he lost his balance. He then fell  more than 4.5 feet, breaking his leg upon impact with the ground. He was hospitalized and had surgery.",1
"An employee was holding a sheet of metal with a coworker while another coworker was operating a brake press machine. One of his coworkers told him to move the brake press's pedal away from their work station. As he moved the pedal with his foot, he lost balance and caught himself by resting his right hand on the  brake press. At the same time, the press engaged and amputated his right pinky finger.",1
"An employee was delivering masonry materials using a boom truck. While the employee was on the back of the truck, a piece of equipment shook loose and struck the employee. The employee was knocked to the ground approximately 5 feet below, fracturing ribs and requiring hospitalization.",1
"An employee on a scissor lift was caught between the lift's guardrail and a suspended conveyor belt. At the time of the incident the lift was elevated and being driven by a coworker. 

The injured employee was hospitalized w broken ribs.",1
An employee suffered a broken left ankle while attempting to step off a walkie rider pallet jack. The pallet jack had not come to a stop at the time of the incident.,1
"An employee was prepping food inside a cooler when she lost her balance and fell, injuring her hip and leg. She was hospitalized.",1
An employee was putting a 250 lb. steel coil back onto a skid after it had fallen off the skid while placing the skid onto pallet racking. The coil started sliding off again and the sharp edge amputated the right middle fingertip.,1
"An employee was signaling railcars when one of them struck the employee, causing internal injuries.",1
An employee was lifting an engine using a hoist when the chain slipped on the hoist and caught the employee's right small finger between the chain and engine. The employee's finger was severely lacerated.,1
An employee was cutting ductwork from an elevated position on a scaffold when the ductwork fell and knocked the employee 5 feet to the ground. The employee suffered head trauma and broken vertebrae.,1
An employee tripped over the wheel of a wheelchair and fell resulting in head trauma and a left knee injury.,1
"An employee fell approximately 25 feet through a floor opening while constructing fertilizer moving equipment, suffering multiple fractures.",1
"An employee was on a picker pallet unloading stock off a rack when the pallet broke and he fell 5 feet to the ground, lacerating his right eye and suffering a fracture.",1
"An employee was walking to catch a shuttle bus in the shipyard when a knee gave out. The employee fell and landed on the right hand, fracturing the right wrist and breaking the left tibia.",1
"An employee had driven a wheel loader onto a trailer and was stepping off the wheel loader's cab when he fell backwards 5 feet to the ground, suffering a line fracture to his vertebrae. He was hospitalized.",1
"On June 28, 2017, at approximately 11:30 a.m., an employee was on a ladder cleaning an empty metal bin when he fell into the inside of the bin, suffering a cut on his arm, cracked rib, chipped hip bone, cracked pelvic bone, and cracked upper arm/shoulder bone.",1
An employee was rolling a steel beam to be staged for a crane and caught his left middle finger between the beams resulting in amputation of the finger.,0
An employee was cleaning industrial equipment with a high-pressure washer when the water stream contacted and lacerated his back.,1
An employee was working at a customer's home performing installation work when he felt sick and was hospitalized for heat stress.,1
An employee fell three stories down an unguarded elevator shaft and sustained a broken right ankle and various back injuries.,1
"An employee was adjusting the guide on a powered meat band saw when the plastic glove he was wearing slipped on the wet metal, causing his left hand to contact the blade. His left thumb was partially amputated.",0
"An employee had serviced an HVAC unit and was descending from a 4-foot step ladder when he missed a step and began to fall. In an effort to brace himself, he reached out and grabbed the HVAC unit's condensate pan, which sliced open his right hand and damaged the tendons.",1
"An employee fell 5 to 6 feet to the ground while climbing a scaffold, fracturing a leg.",1
"An employee was setting lights throughout a movie studio when he stepped on a large piece of concrete (rock) and rolled his left ankle, breaking it.",1
"An employee was descending a staircase after dislodging feed bags that were stuck on a conveyor when he fell approximately 6 feet and his right leg struck a cattle scale, breaking it above the ankle and requiring surgery/hospitalization.",1
"An employee was using a pallet jack to move a pallet of doors when he bumped into a stack of mirrors on a pallet. As he attempted to stop the mirrors from falling, his right arm was lacerated by the sharp edges of a mirror.",1
An employee was attempting to retrieve cut stock from the back of a metal shear when the shear cycled and amputated three of his left fingers.,0
"On 06/29/2017, an employee was attempting to move an old guide roller from a saddle to a forklift. The roller did not have enough momentum to roll onto the forklift and rolled back onto the saddle, catching and crushing the employee's left leg between it and another roller. He was hospitalized.",1
"An employee was cleaning a finished boat after completing the manufacturing process. The employee moved to the rear of the boat to retrieve finishing pieces and fell approximately 56 inches to the concrete floor, fracturing the L5 vertebra.",1
"An employee was on a forklift when the forklift began to roll onto a dock. The employee placed his hand above a grate to stop the forklift, and his fingers were amputated.",0
"An employee was struck by a 2,000-pound trench manhole that fell from a truck to the ground. The employee suffered a broken pelvis, broken wrist, internal injuries, and a head laceration.",1
An employee was helping to place tarping on a roof before the rain came when he fell two stories.,1
"An employee was attempting to pick up a roll-off container with hoisting cables when the hook on the container broke and the hoisting cable flew up and over the employee's tractor truck, contacting the overhead power lines. The controls on the truck became energized in the employee's hand, and he suffered first degree burns to his right hand and foot.",1
An employee was attempting to clean a trimmer when her right hand was caught under the trimmer. Her right pinky finger was then pinched and partially amputated between the trimmer guarding and the machine's pulley.,1
"An employee was cleaning around a knock-down machine when his right thumb was crushed, requiring surgery.",1
"An employee was removing a skid from a trailer using an electric pallet jack. As he was coming out of the trailer, he turned the handle of the pallet jack to change direction. His right hand was then caught between the handle of the pallet jack and a steel pole, bruising it and partially amputating the middle finger.",0
An employee suffered a left ring finger amputation while operating a chopper machine to cut metal scrap.,1
"On June 29, 2017, an employee was pulling product off a conveyor belt to assist a coworker who was cutting the meat product with the bandsaw. He was trying to move some meat product when his left ring fingertip was partially amputated by the bandsaw.",0
An employee was using a pallet jack to load a trailer on the loading dock when a passing forklift ran over and broke his left ankle. He was hospitalized.,1
"On June 29, 2017, an employee was emptying a trash dumpster. He used a forklift to set the dumpster over the trash compactor. Once it was set, he exited the forklift and used the lever on the side of the dumpster to dump the trash. On his way back up, his finger was caught and fractured in a pinch point between the dumpster and compactor, requiring hospitalization.",1
An employee was removing a pin from a lifting arm on a pipe handling table when his right ring finger was pinched by the arm. His finger had to be amputated. The equipment was locked out at the time.,0
"An employee was loading valves onto a lowboy trailer. When he stepped off the trailer, he tripped and fell to the ground, fracturing his right elbow and requiring overnight hospitalization.",1
"An employee was flagging a forklift when the forklift struck a steel beam, causing it to swing and strike the employee in the back of the head. He suffered a possible concussion and was hospitalized.",1
"An employee received an electrical shock and fell from a ladder while working on lighting controls, breaking a vertebra.",1
"An employee was cleaning a sheeter/molder machine with a towel when the towel and his left index finger were pulled into the machine, partially amputating his fingertip. The machine was energized at the time.",1
"An employee tripped and fell to the ground, breaking a femur or hip.",1
"An employee was walking when he was struck by a malfunctioning riding trowel, breaking his leg.",1
"An employee attached a chain sling to a manual frac valve that was to be lifted by an overhead crane. The crane operator lifted the valve, noticed it was not aligned properly, and lowered it to be corrected. As the crane lowered the valve, it slipped from the chain sling and struck the employee's left foot, crushing the large tow.",1
"While taking electrical measurements, an employee contacted a live circuit, suffering an electric shock.",1
"An employee was attempting to dislodge a stuck part on a roll forming machine when his right hand was caught between two pieces of metal and the machine guide, amputating his little finger around the middle knuckle, damaging his ring finger, and cutting his middle finger (requiring stitches). The machine was guarded at the time.",1
"While pouring and finishing concrete using a pull-along tool, an employee began cramping and feeling fatigued due to heat-related illness, requiring overnight hospitalization.",1
An employee was attempting to remove a gasket that was caught between a conveyor belt and pulley when his left forearm was caught and fractured in the conveyor pulley.,1
An employee was tightening the negative cable of an elevated dump trailer when the trailer fell on and crushed his arm.,1
"An employee was walking toward a copier when she stubbed her toe and fell. She hit her head, cut her right finger, fractured her left wrist, suffered a hairline fracture to her hip, and fractured her shoulder.",1
"An employee fell from a 6-foot step ladder while attempting to change a light bulb, suffering a head concussion, broken ribs, and scrapes/cuts. The employee was hospitalized.",1
"An employee was removing a 25-pound cup conveyor part from a storage rack when he lost control of the part and it fell, crushing his finger between the part and the rack. He suffered a left index finger amputation.",0
"An employee was attaching the rigging on a base weight when his left foot was caught in the chains. The chains then pulled tight and trapped his left foot between the chains and the hitch, amputating his left big toe.",0
"An employee was checking the engine/generator on a bus when the radiator cap loosened and hot engine coolant splashed onto his arm, causing second/third degree burns. Some fluid also splashed in his mouth.",1
"An employee was bending metal on a brake press machine when the employee's left hand was caught in the machine, amputating the middle, ring, and pinky fingers.",0
"An employee was installing sheet metal at a business when wind blew a section of the sheet metal into a powerline, causing the employee to sustain an electrical burn to the right hand. The employee was hospitalized.",1
"An employee was getting into a car when he tripped and fell to the ground, injuring his head, elbow, and hip.",1
"An employee experienced heat-related illness while setting up concrete forms in the yard, requiring hospitalization.",1
An employee was shot in the abdomen while running cable lines from a main box to an apartment.,1
An employee was unloading square hay bales from a flatbed trailer. Two bales fell off the trailer and struck the employee resulting in fractured ribs and leg.,1
An employee's left leg was crushed by a steel beam being lifted by an overhead gantry crane. The employee was hospitalized with compound fractures.,1
"An employee was rinsing out an ISO container that last contained chloroaniline using a 3,000 psi pressure washer. After exiting the container, he became lightheaded and required hospitalization for chemical exposure to chloroaniline.",1
"An employee was changing blades on a shear when his left hand was caught in the blade holder, amputating part of his thumb.",0
"An employee was unloading an 800-pound dock plate from a trailer when the dock plate fell on him, fracturing his pelvis and requiring hospitalization.",1
An employee was installing electronic matches in 4-inch ground burst fireworks when they exploded and amputated her fingers.,1
"An employee fell from a pallet and fractured a hip, requiring hospitalization.",1
"On June 30, 2017, an employee was carrying a door panel after removing it from a vehicle body when he tripped and fell. The door panel then struck and partially amputated his fingertip.",0
"An employee was checking the alignment of a bolt hole while using a lifting sling and jack stands for support. As he was trying to place the trailer into position, it struck and amputated his fingertip.",1
An employee was slicing meat on a deli slicer when his right index fingertip contacted the blade and was amputated. The slicer was unguarded at the time.,0
An employee was pouring a bag of lime into the loading tank and breathed in a plume of lime. The employee was hospitalized.,1
"On June 30, 2017, an employee was using a band saw to cut a frozen tube of ground beef into patties when the meat slipped and the employee's right hand contacted the blade, amputating the index finger just below the second knuckle.",0
An employee was washing the cement truck and caught the left pinky finger in the chute resulting in amputation.,1
"On June 30, 2017, an employee was operating a snubbing unit, getting ready to pull pipe out of a well, when a 2-inch hose popped off and struck him, fracturing his right forearm and requiring surgery.",1
An employee was using a saw to build pallets when the blade lacerated the employee's left hand.,1
"An employee fell approximately 12 to 14 feet while installing felt on the porch area of a commercial roof, suffering a broken clavicle, broken ribs, a collapsed lung, and head trauma.",1
"An employee was checking PVC powder in an extruder machine when he lost his balance while stepping down from the platform and fell to the ground, fracturing his right hand.",1
An employee was back-filling dirt along a newly installed silt fence using a shovel and suffered heat stroke.,1
"An employee was using a crane to unload a nail jack from a truck when the crane shifted and caught the employee's right index finger, partially amputating it.",0
"An employee was using a band saw to cut meat when his right pointer finger contacted the blade, fracturing it and lacerating two tendons. He was hospitalized overnight and had surgery.",1
"An employee was handling a flex line full of hot water when water drained from the hose and entered the employee's boot, severely burning the employee's foot and leg.",1
"An employee was walking in the same direction as a 36,000-pound forklift when the forklift struck the employee resulting in a fractured pelvis that required surgery.",1
"An employee was on a three-step ladder and pulled down a tote from an overhead shelf. As he turned to step down, he fell to the floor and broke his left femur.",1
An employee was working on a dust collector motor. The employee was manually moving the pulley motor when his finger was caught between the pulley and the belt. The employee's finger was amputated at the first knuckle at the hospital.,0
"An employee was traveling inside a warehouse with a loaded forklift when he entered a cross-traffic intersection and struck another forklift. He stuck his foot out to brace himself. His foot was then caught between the forklifts, breaking his ankle.",1
"An employee was on the front porch, pulling out weeds from the flower bed. As she stood up, she felt pain in her stomach area. She was hospitalized overnight for surgery.",1
An employee was installing ductwork and fell approximately 15 feet.,1
"An employee was climbing a ladder when a rung broke. The employee fell to the ground, suffering a broken wrist and laceration.",1
"On June 30, 2017, an employee suffered from heat exhaustion after doing deck demolition at a job site, requiring hospitalization.",1
"An employee was standing on the ground setting concrete rubble onto an excavator bucket when the excavator bucket moved, striking the employee on the right lower leg. He suffered a skin tear and fracture to his right leg, requiring hospitalization.",1
"An employee was repairing an abrasive blasting pressure pot. The employee turned off the blasting machine before leaving the area to get a different tool. While the employee was away, a coworker turned the machine back on. When the employee returned to continue work, the coworker triggered the system, striking the employee with pressurized blast media. The employee suffered a serious abrasion and punctures to the face, neck, torso, arms, and leg, requiring hospitalization. The machine was not locked/tagged out at the time of the incident.",1
"An employee was rolling pipes by hand on top of the first layer of pipes in the pipe rack, when he lost balance and his right foot was caught between the pipes from the first layer. As he tried to stop an incoming rolling pipe with his left foot, he fell on top of the pipes and fractured his left ankle and a little bone in the leg. He was hospitalized.",1
An employee was trying to install a rotating head when his right thumb was caught and amputated between the rotating head and a drill pipe.,0
"An employee was standing on the deck of a vessel when a steel cable swept across the deck, causing the employee to fall and break his ankles.",1
An employee was testing a 50-foot liner that goes inside a hose when he suffered second degree steam burns to his back.,1
An employee collapsed due to dehydration.,1
"An employee was tucking in a plastic wrap tail on a pallet that was on a conveyor belt when another pallet came down the conveyor and smashed his right index finger between the two pallets, amputating his finger just above the nailbed.",1
"While climbing a fiberglass, 6-foot, A-frame ladder, an employee became dizzy, fell backward, and struck the ground, suffering a fractured skull, jaw, and vertebra.",1
An employee was on the ground waiting for a ride when a coworker ran over his legs with a vehicle and dragged him 10 feet.,1
"While sandblasting a pipeline, an employee stepped on the sandblaster's air hose. The nozzle then swung toward the employee, and sandblast media was injected into his arm.",1
An employee was inserting newspapers into an inserter machine when her right hand entered the machine. The machine then broke her right arm.,1
"An employee had mopped a floor, left the area, and then returned. While walking on the damp floor, the employee slipped, fell, and fractured the left kneecap.",1
An employee's left foot was run over and crushed by a moving forklift.,1
An employee suffered heat stress symptoms (cramps and excessive sweating) while loading returnable bottles and cans on a truck. He was hospitalized with heat-related illness.,1
An employee was overcome with heat stress and was hospitalized.,1
"An employee was rigging down casing tools. He had two rig bales on the rig floor and was readying them to be let down to the rig floor. He had one bale upright when the rig-hand helper picked up the other bale and caught his ring finger between the two, partially amputating his distal fingertip.",1
"An employee was hooking up two tandem trailers when the second trailer's dolly started free rolling. The employee's left hand was then pinched between the dolly and the hook on the lead trailer, amputating the left pinky fingertip.",0
"An employee was connecting the fifth wheel of a tractor to a trailer when the wheel bounced up and caught the employee's ring finger, causing a compound fracture and severe laceration.",1
"An employee was breaking out of a substructure when a driller went in the wrong direction with equipment and struck the employee's left thigh and calf, causing a laceration and severe contusion.",1
An employee was installing drywall sheathing and felt dizzy. The employee was hospitalized for a heat-related illness.,1
"An employee was hanging a picture when it fell. The glass cover shattered, and a piece of glass lacerated his wrist.",1
An employee was putting a motorcycle on a lift when the bike missed the front wheel slot and fell on him. He suffered a hip contusion.,1
"An employee was working at a retail counter window when she lost her balance while retrieving a package and fell to the floor, breaking her hip.",1
"The employee was cutting a metal cabinet that was being scrapped and cut off one of the walls. The employee walked into the cabinet to cut the back wall, turned around to grab his torch hoses, and the piece of wall fell on the employee resulting in a pelvic injury.",1
"An employee slipped in a walk-in cooler, suffering head, wrist, and knee injuries.",1
An employee was adjusting a dump table gear on a piece of work when a coworker who was helping energized the equipment. The rotating equipment then amputated the employee's pinky fingertip.,0
An employee was burned when a fire hose burst under pressure and sprayed him with hot water.,1
"An employee was removing panels from a pre-existing roof when he fell 20 feet from the center of the roof to the concrete surface below, breaking his left wrist and severely bruising his pelvis.",1
"An employee was cutting wood with a table saw when the employee's left hand came into contact with the cutting blade, lacerating the ring fingertip and amputating the index finger distal phalange and middle fingertip.",0
"A workover crew was tripping out of a hole when the drill line parted, causing the blocks to drop from 10 to 15 feet up and fall onto the floor. The drill floor sprung up when the blocks contacted it, throwing an employee off the floor. He fell approximately 15 feet onto the ground, breaking a rib.",1
"While walking quickly through a retail area to catch up to a coworker, an employee struck a table, tripped, and fell to the ground, breaking the arm/shoulder area and requiring surgery.",1
"An employee was installing a tent. The employee fell off a 12-foot frame ladder while trying to access the second level of the tent. The employee suffered broken ribs, fractured vertebrae, torn tendons and a punctured lung.",1
An employee was carrying hot water to the work area in the kitchen when the hot water contacted and burned the employee's lower extremities.,1
"An employee was driving a forklift around a corner when he attempted to adjust his forks. He then hit another forklift driver, lacerating his calf on the forks of the second lift.",1
An employee was operating an upright pallet rider and was coming around the corner to pick up a label for a shipment when the pallet rider accelerated. His right leg was then pinned and broken between a shelf's upright support and the pallet rider. He was hospitalized.,1
An employee was going to open the walk-in freezer when she fell and broke her hip.,1
An employee was struck by an automobile in the truck lot resulting in trauma to the right hip and elbow.,1
"An employee was walking down stairs while carrying cleaning supplies when she lost her footing and fell, fracturing her left leg.",1
An employee was using a silage bagging machine to take samples of silage from semi-trailers when the machine wheel ran over his foot and broke his leg.,1
"On July 3, 2017, an employee was erecting a system scaffold tower when it shifted, causing the employee's finger to become pinched between the wall and the scaffold system. The employee's left ring fingertip was amputated.",0
"On July 3, 2017, an employee was installing PVC pipe and using a chop saw when the employee experienced heat stress and heat exhaustion symptoms. The employee was hospitalized.",1
"An employee was winding cable up on reels when the employee's finger was caught in a trailer and smashed, partially amputating the fingertip.",1
An employee was unloading a conveyor when his hand struck the conveyor guard and was lacerated. He was hospitalized.,1
"An employee was lifting a drive shaft from a pump using chains when one of the chains came off and struck the employee's right leg, lacerating and dislocating the right knee.",1
"An employee was delivering product from a truck. He was pulling on a strap to move the freight when the strap broke, causing him to trip over a pallet jack that was behind him. He fell on the truck's lift gate and then rolled off and fell to the ground, breaking three ribs.",1
"On July 3, 2017, an employee was operating a range ball picker when it became stuck. The employee exited the range ball picker to push it and was run over by the picker.",1
An employee suffered a right index fingertip amputation while attempting to remove a bottle jam on a line. The line was unguarded and not locked/tagged out at the time.,1
"On July 3, 2017, at approximately 7:10 AM, in the welding area, an employee was pushing his toolbox to the desired work area. At the time the employee was pushing his tool box there was a prybar sticking out beyond the side of the toolbox. The employee ran into a crane rail structure, crushing the employee's left pinky and ring fingers.",1
"While spraying precast concrete from a scaffold, an employee slipped and fell 4 feet to a main scaffold and then fell an additional 14 feet to the ground, suffering a head injury that required hospitalization.",1
"An employee was on an 8-foot A-frame ladder, attempting to pull a control wire, when he fell to the ground and injured his pelvis.",1
"An employee was operating a winch boom crane bucket truck. The employee was in the bucket using the winch to remove a manhole cover that was stuck. The manhole cover released and the bucket truck bucked, throwing the employee out of the bucket. The employee fell 25 feet to the concrete pad and suffered head trauma. A harness was not worn at the time of the incident.",1
An employee was checking the fuel tanks in the parking lot and was struck by a vehicle resulting in a broken rib.,1
"An employee was re-painting a patio ceiling while standing on an extension ladder when the ladder became unstable and fell backwards, causing the employee to fall 15 to 16 feet to the ground. During the fall, the employee's face struck the ladder. The employee suffered a broken nose and cuts and bruises to the arms, legs, and hands.",1
"An employee was getting a broom from a broom rack when his finger was caught in a metal broom holder, partially amputating his left second finger.",0
"An employee was using an industrial hand drill to make a hole in a cinder block. The drill bit caught a snag and the drill spun around in the employee's hand, causing him to lose his grip. He was then struck by the drill and suffered an orbital bone fracture on his face and blood clot behind his eye.",1
"An employee was working at the plastic lid forming mold when the employee's left arm was caught between the mold wheel and a plastic sheet lay-down roller, crushing the soft tissue in the left forearm.",1
"An employee was getting rags to wipe down a part that had just been dipped in LORCOAT when an explosion and fire occurred, causing second and third degree burns to the employee's arms, second degree burns to the neck, and first and second degree burns to the head. The employee was hospitalized.",1
"An employee was backing up a pallet mover when her left calf was caught and lacerated between a conveyor guard and the pallet mover, requiring surgery.",1
An employee was bitten by a spider while handling baggage. The employee became ill and the area that was bitten became swollen.  The employee was hospitalized.,1
"An employee was making caustic soda from water solutions. The caustic reacted violently with hot water and caused chemical burns on the employee's right kneecap, lower thighs, right leg, and left leg. He was hospitalized.",1
"An employee was lifting a perforated gun string to go down in a hole when the gun string broke loose and struck the employee's lower back, breaking the tailbone.",1
An employee was cleaning the paper roller with an abrasive pad and caught two fingers on the right hand in a nip point between two rollers resulting in amputation of the fingers.,1
An employee was tipping recycling waste containers into the truck. He was actuating the lever with his right hand while his left hand was on top of the container tipper. The employee suffered a partial amputation of the left index finger.,0
An employee was lighting fireworks when a firework exploded causing injuries to the employee's torso and legs.,1
"On July 4, 2017, an employee removed a bonfire pit on the beach and then left. He went back to the beach later and his left foot stepped into the hole of the bonfire pit, suffering second and third degree burns.",1
"An employee was picking up a trip nipple with a hoist when the hoist became hung on top of a drive. The employee used the left hand to free the hoist. Once the hoist was freed, the trip nipple sprung up and caught the employee's left hand between the nipple and the elevator, breaking it.",1
An employee was standing outside when an assailant struck the employee in the head with a stick. The employee was hospitalized for a fractured sinus cavity.,1
"An employee was attempting to change a motor on an air compressor unit that was non-operational. As he attempted to disconnect the air hose, the coupler blew apart and struck him in the back of the head. He suffered multiple fractures and head trauma.",1
"An employee was flagging traffic when a car went around the shoulder of the road and hit the employee. The employee suffered a fractured collarbone, broken ribs, a punctured lung, and a broken arm.",1
"An employee was operating a corner notching machine to notch steel when the steel rolled up, causing the employee's right ring fingertip to be caught and amputated between the steel and the machine.",0
"An employee was dismantling scaffolding. The employee raised a platform section from the lowest position (at four feet high) up to approximately eight feet in order to access and unbolt the top tower section to take it down. The employee removed the four corner bolts holding the section in place then proceeded to climb back down. The employee inadvertently grabbed the unbolted tower section while attempting to climb back down and it  fell onto the employee pushing the employee off the platform approximately eight feet to a compacted stone parking lot surface. The employee sustained a fractured pelvis, a head laceration, and contusions and abrasions.",1
"An employee was loading and unloading a truck. While exiting the vehicle, he hit his hand on the rear door, partially amputating his right middle finger.",0
"An employee was changing a connection at a home power meter. He was trying to replace the coaxial cable line from the ground block to the pole mount. He cut the wire and his arm brushed against the bonding clamp. When he made contact with the clamp, he was electrically shocked and knocked down. He suffered electrical burns to his left forearm and left leg, requiring hospitalization.",1
"An employee was bitten by a dog while delivering mail, suffering puncture wounds and lacerations to the head, neck, hand, and arm.",1
An employee was operating a reach truck to move and retrieve products when her right leg was crushed between her reach truck and a bollard. She also suffered a possible broken pelvis.,1
"An employee was carrying tools up an extension ladder when the ladder's feet began to slide back along the steel decking below. He lost his balance and fell approximately 7 feet to the steel decking, lacerating his right knee and breaking his right kneecap. He was hospitalized.",1
"An employee was using a forklift to put a wooden header into place when the header fell off the fork tines and broke a wall brace, causing the wall frame to come loose and strike the employee's right leg. The employee suffered a broken right femur and was hospitalized.",1
An employee was pulling hose while spraying herbicide near power lines and was bitten by a poisonous snake. The employee was admitted to the hospital.,1
"An employee was patrolling the grounds in a car when she suffered heat exhaustion, requiring hospitalization.",1
"An employee was operating a fleshing machine when an animal hide became stuck in the roller system. As the employee attempted to remove the hide, the employee's left hand was pinched between a rotating chain and sprocket, partially amputating the third digit fingertip and avulsing the second and fourth digits. The machine was guarded and was not locked/tagged out at the time.",1
An employee was wiping shavings from the blade of a chopper machine when the chopper amputated his pinky finger and the tip of his ring finger. The machine was active at the time of the incident.,1
An employee was hospitalized after servicing equipment and received a finger amputation.,1
"An employee was tarping a load of steel on a semi-trailer when he fell 3.5 feet from the trailer to the concrete pavement below, suffering a scalp laceration, skull fracture, and brain hemorrhage.",1
"An employee was working on a binding machine when the wrench he was using was caught on the belt of the machine, causing his right ring and pinky fingers to be pulled into the system. His right pinky fingertip was amputated at the nail.",0
An employee was attempting to re-align a drive pulley when the system activated. The employee's right middle fingertip was caught and amputated between the pulley and the drive belt.,0
"An employee stepped on a wet floor, slipped, and fell on his lower back, fracturing his hip.",1
An employee was about to go down an elevator to a service tunnel when the elevator abruptly dropped 50 feet. The employee suffered head and neck injuries.,1
"An employee was operating a machine on a roof when he moved backward and fell 30 feet off the roof into a material roller on the ground, breaking his ribs.",1
An employee was replacing forklift cylinder seals on the outer main lift cylinder. The employee raised the mast channels to separate the cylinder from the mast. The jack failed and the employee's right hand was caught between the cylinder and the forklift mast resulting in a crushing injury to his right hand.,1
An employee was picking up trash when he fainted due to dehydration and hit his head on the floor.,1
An employee was driving a forklift clamp to pull stock from the warehouse when he possibly hit a short safety pole. He was found laying on the concrete dock floor with a head injury. He was hospitalized for a fracture and internal bleeding.,1
An employee was installing a down guy-wire on an overhead cable TV facility when the tail of the wire contacted the overhead powerline. The employee received an electrical shock and was hospitalized.,1
"An employee was loading cartons onto a trailer. He was standing on a step stool when he reached to the side and fell, landing on the carton that he was loading and injuring his back. He was hospitalized.",1
"On July 5, 2017, an employee suffered an amputation injury to his hand while performing a routine pin change on a facer. The guard was not in place at the time.",0
"On July 5, 2017, at 10:00 a.m., an employee was dumping yard waste onto a garbage truck's hopper when he started to feel ill. He was hospitalized for dehydration.",1
An employee was carrying a box when he tripped over a pallet and fell to the floor. He broke his hip and was hospitalized.,1
"An employee was emptying a waste pan on a portion saw when the pan slipped and caught his right ring finger, amputating the first digit.",0
"An employee was riding a manlift on the top floor of a milling area. He missed a step while dismounting the manlift and fell to the landing floor, injuring his ankle.",1
An employee was roofing a house and was shocked when he touched a live power line.,1
The employee was working in the fabrication department on a machine that cuts the boat dashes and has a circular saw on one end and a drill bit on the other end. The employee was struck by the machine resulting in lacerations to his back.,1
"On July 6, 2017, an employee fell from a ladder while performing HVAC servicing, hitting his head on the concrete floor below.",1
An employee fell down stairs and suffered an exposed fracture.,1
"An employee was standing nearby as a crane operator attempted to remove a spindle from the mill. The operator hoisted the crane up too high and the chain sling broke. When the chain broke, it struck the employee on the right elbow, lacerating and fracturing part of the humerus bone.",1
"An employee was picking up cans beneath a machine at about 1:45 a.m. when the employee's left hand came in contact with a gear chain, amputating the left middle fingertip to the first knuckle.",1
"An employee was operating a fork truck when a bug flew into the employee's face. As the employee was swatting at the bug, the fork truck turned and rolled onto its side. The employee's right leg was crushed under the fork truck and had to be amputated below the knee.",1
"An employee was pouring concrete when concrete blocks began to fall on him. As he attempted to move out of the way, he hit his head on the ground, suffering head injuries that required hospitalization.",1
An employee was cutting wood with a circular saw when the blade amputated his right thumb tip.,1
An employee was moving a disabled cab crane with a coworker when his left foot and ankle were crushed between the crane and the track.,1
An employee became ill and suffered heat stress while making a delivery. He was hospitalized for severe dehydration.,1
An employee was cutting plastic trim with a utility knife when the knife slipped and lacerated his left wrist.,1
A temporary employee was admitted to the hospital with heat exhaustion/stroke.,1
"While loading a truck, an employee began to feel ill and experienced chest pains. The employee was hospitalized for potential heat stress, dehydration.",1
"An employee was acting as a ground guide as a pickup truck was laying out a hose. The hose reel was not secured to the pickup truck bed and fell on the employee, injuring the left side of the employee's body and breaking the left ribs.",1
An employee was setting forms in preparation to pour a concrete deck on a bridge when he started to feel ill. He later experienced intense cramping and was hospitalized for heat exhaustion and dehydration.,1
"An employee driving a truck pulled over to allow a police car to pass. The employee then stepped out of the passenger side to check the truck. At that time, the employee was struck by the car being chased by the police, suffering leg and other injuries.",1
"An employee experienced heat stress while performing pump maintenance, requiring hospitalization.",1
"An employee fell from a 20-foot extension ladder while installing a window, suffering a fractured jaw and losing some front teeth.",1
"An employee tripped and fell while walking to a car in the parking lot, breaking the right arm.",1
"An employee climbed the steps of a work platform to inspect the passenger side of a pump trailer that was leaking. As he was descending from the platform, he slipped and fell into a sitting position on top of a bracket that went through his coveralls and punctured the inside of his right thigh.",1
An employee was making an adjustment to a tool punch on a punch press. The press cycled while his hand was on top of the punch crushing a right hand finger.,1
"An employee was loading a flatbed truck when he slipped and fell, hitting his head and shoulder on the flatbed truck.",1
"On July 6, 2017, an employee suffered from suspected heat illness after forming concrete all day in temperatures in the mid-80s. He was hospitalized.",1
"An employee was using a hose to empty flowback water tanks at a drilling rig. When he removed the hose from the tank, he was sprayed with hot flowback water, which burned his arms and torso.",1
"An employee was performing maintenance on a piece of equipment that was locked out. He was changing out the pulley and belt with a shaft when his left hand became caught in the pulley and belt, partially amputating his pinky fingertip.",0
"An employee was removing gutters. The employee stepped off a ladder onto the roof to remove a screw from the gutter, disturbed a wasp nest, and was stung repeatedly causing the employee to fall 15 feet from the roof edge. The employee was hospitalized for a laceration on the forehead.",1
"An employee was putting a stopper in the bottom of a glass tube. The glass tube broke and cut both of the employee's hands, amputating the left pinky fingertip.",0
An employee was cleaning the cyclone on the AZO auger on the paint line when the employee's finger contacted a rotating auger resulting in a fingertip amputation to the right middle finger.,0
"On July 6, 2017, at 9:30 p.m., an employee was connecting a trailer to a tractor when his left thumb tip was caught and crushed between the O-ring on the tongue and the pintle hook. His thumb tip had to be surgically amputated.",1
An employee was attempting to dislodge dough from a dough-separating machine when the machine's cutting blade amputated the employee's left middle and ring fingers. The machine was running at the time.,0
"An employee was using a pair of pliers to clear jammed chicken from a cuber machine when the employee's left hand was pulled into the machine's knives, lacerating and partially amputating the ring and pinky fingers.",1
"An employee was on top of a vacuum box, loosening a cap on a vent pipe with a pipe wrench, when he fell approximately 4 feet and landed in a sitting position. He suffered a compression fracture and was hospitalized.",1
"An employee fell while walking down stairs, fracturing a shin.",1
An employee was pouring concrete when the hot concrete contacted and burned the employee's right foot.,1
"An employee was moving an electrical cabinet when it tipped and fell on the employee, breaking the left arm.",1
"On July 6, 2017, an employee was cutting grass using a lawn mower when he slipped and fell onto the ground. His left foot was caught under the blade of the lawn mower, amputating two toes.",0
"An employee was using a skid-steer to scoop and dump scrap aluminum into a rotary furnace when the hot metal was blown onto his right arm and back, causing burns.",1
"An employee stumbled, fell backward, and hit his head on cinder blocks. He lost consciousness and suffered a laceration to the back of his head, requiring hospitalization.",1
"An employee was on a ladder adjusting a Lally column when he slipped and fell to the ground, landing on his head and suffering a concussion.",1
An employee was preparing for a concrete pour when he began to feel ill. The employee was hospitalized overnight due to heat related illness.,1
An employee was helping to direct a hose during a concrete pour when he cramped up due to the high heat levels. The employee was hospitalized and also diagnosed with a muscle injury.,1
"An employee was performing maintenance on a printing press. The press was locked/tagged out, and the employee disengaged and removed the folder mechanism. The employee then attempted to re-engage the folder mechanism and slid it back into the press. As he was re-engaging the mechanism, his left index finger was caught and partially amputated in the mechanism's gear and chain.",0
"An employee was standing on a ladder when he lost his balance and fell approximately 4 feet to the ground, breaking his arm.",1
An employee was moving a refrigerator through a doorway when his right thumb was caught and partially amputated between the door and the refrigerator.,0
An employee had been supervising employees installing overhead electrical lines when he felt ill and experienced cramping. He was hospitalized for heat exhaustion and dehydration.,1
"An employee was operating a handheld grinder to cut cast iron when the grinder kicked back and lacerated the employee's finger, requiring surgery.",1
An employee was bitten by an alligator while diving for golf balls.,1
"An employee was getting up from her desk when she tripped over a rug, fracturing her right upper arm.",1
"An employee was installing an electrical box when a concrete form fell on and broke the employee's ankle, requiring hospitalization.",1
"An employee was on a ladder servicing a solar heating unit when the ladder buckled and the employee fell approximately 10 to 12 feet to the ground, fracturing the L2 vertebra.",1
"An employee was standing approximately 15 to 20 feet away from a kiln's fire box, which was being ignited with saw dust, when a flashback occurred from the fire box. The employee suffered burns to the face, neck, right ear, and arm.",1
"An employee was descending an A-frame step ladder. While on the third rung, he missed the second rung and fell to the concrete ground, breaking his left arm.",1
An employee was performing residential waste management duties when he experienced heat exhaustion and was hospitalized.,1
An employee was placing a cable from a hoist when his left fingertip was partially amputated by the pulley apparatus and chain.,1
"An employee went to retrieve keys from a utility truck during a thunderstorm when lighting struck the overhead powerline and energized the truck, causing him to experience shortness of breath. He was hospitalized.",1
"An employee was in a work truck. When the truck stopped, the driver's-side sliding door slammed against the employee's hand, breaking fingers.",1
An employee was found unconscious and shaking on the floor after fixing an electrical wire of unknown voltage. The employee may have been shocked.,1
An employee was walking when their foot was run over by a forklift resulting in a crushing injury.,1
An employee was walking down stairs when he fell and broke his left leg. He was hospitalized and had surgery.,1
"An employee was cleaning a conveyor with a high-pressure hose when the employee's hand/forearm was caught and lacerated between the conveyor's end plate and a sprocket, requiring surgery.",1
"An employee was using an end mill when his glove came in contact with the bit, pulling his left thumb into the end mill and amputating the tip.",0
An employee was rotating a large valve when the sling slipped and pinched the employee's fingers between the sling. The employee's middle and ring fingers were amputated.,1
"An employee was moving from a ladder on the back of a mixer truck to a platform on the rear bumper to discharge ready mix concrete. His boots were muddy and he slipped off the platform. He fell about 3 feet to the ground, fracturing six ribs and requiring hospitalization.",1
"An employee was helping to remove a drill pipe from a hole. His right hand was on the stand of drill pipe while an iron roughneck operator retracted the equipment so it could be positioned out of the way. The iron roughneck operator swung the piece of equipment and struck the employee's right ring fingertip, amputating it.",0
"An employee was moving a stack of drywall when the stack became unstable and the sheets fell on the employee's leg, breaking bones.",1
"On 7/7/2017, an employee began to feel unwell after monitoring equipment while steel solidified. He was hospitalized for heat exhaustion.",1
"An employee was working from a 6-foot step ladder to change an airline near a sterilizer. He was reaching when he lost his balance and fell, striking a pipe on the ground and fracturing his tibia and fibula. He was hospitalized and had surgery.",1
An employee was adjusting the belt wiper on the conveyor belt of a paving machine when the employee's right arm was caught in the machine. Part of the arm had to be surgically amputated.,1
"An employee was manually pruning a tree when he fell approximately 30 feet to the ground below, sustaining multiple lacerations, broken ribs, fibula/tibia fractures, pressure buildup, a cheekbone fracture, a skull fracture, and two fractured vertebrae. He was hospitalized.",1
"A truck driver backed up, stopped, and put the vehicle into park. The injured employee lowered the tailgate. At the same time, the truck settled and rolled back. The employee's index fingertip was then caught and amputated between the truck and the adjacent wall of the building.",0
"An employee was torching flange bolts on a by-pass run when the by-pass twisted and swung down, striking and breaking the employee's ankle.",1
"An employee was trying to move a pallet using a rope and pallet jack. The rope had tension and made contact with the employee's left middle finger, lacerating and amputating it.",0
"On July 7, 2017, at approximately 10:15 a.m., an employee was prepping material to be cut on a bandsaw. When he went to put a spacer between the bandsaw clamp, the clamp closed on and crushed his left index finger, resulting in a fingertip amputation.",0
An employee was setting up to hydro-blast inside a pressure vessel that was 72 degrees when he became nauseated and suffered cramps. He was hospitalized for dehydration.,1
"An employee was installing a lock out latch on a knife blade circuit. The employee contacted the energized top contacts in the electrical box that resulted in an arc flash. The power source was not locked out at the time. The employee sustained second and third degree burns on the front of his upper body, face and hands.",1
An employee had tested a water filter when the water pump overheated and blew up the hose. He suffered burns to the back of his left leg and was hospitalized.,1
The employee was unloading a truck. He tripped and fell over packing material that was laying on the floor resulting in a right hip fracture.,1
"An employee was using a 1-ton crane to move a 1,462 lbs. load when the crane's bridge beam broke, causing the crane and load to fall. He was struck by the crane's bridge beam, fracturing a shoulder and a rib.",1
"An employee was in the restroom when one of her legs gave out and she fell, fracturing an ankle and requiring surgery.",1
"On 07/07 2017, an employee was exiting a flatbed trailer (36"" from ground level) when he landed wrong and fractured his right ankle.",1
An employee was checking for leaks inside a barge and welding in areas where there were leaks. The employee was shocked by a welding lead and collapsed. He struck the bottom of the barge injuring his shoulder. The employee also suffered burns to his hands.,1
"On July 8, 2017, an employee fell approximately 5 feet while performing a dock plate inspection, suffering contusions to the right shoulder and hip.",1
"An employee was doing maintenance on a roll-forming machine when her glove was caught in the machine and her hand was pulled in, amputating her fingertips.",0
An employee was descending a ladder from a truck water tank when his left ring finger was caught and severely lacerated in the rung. He was hospitalized and had surgery.,1
Two employees were stacking and organizing wooden temporary work platforms on dunnage when the injured employee heard a pop in his lower back while lifting a platform. The employee suffered two herniated discs in his lower back.,1
Two ball players collided with each other resulting in one player fracturing his right tibia and fibula.,1
"On July 8, 2017, an employee was adjusting a part onto a CNC machine. He used a foot pedal to actuate an air clamp to hold the part in place. His left middle finger was caught between the part and the clamp, amputating his fingertip.",0
"An employee was driving a hostler and transporting an intermodal container on a chassis to the back row of the yard. When he attempted to position the truck to reverse into the parking spot, the truck possibly jackknifed, causing the intermodal container to fall from the chassis and the hostler to raise up off the ground and then slam down again. The employee was bounced around inside the cab of the hostler, suffering a broken jaw, broken right elbow, broken rib, and contusion to the right knee.",1
"On July 8, 2017, an employee was spotting for a forklift when the employee was pinned between the forklift and a cement column, bruising the abdomen and groin area.",1
An employee was pressure-cleaning when he lost his balance. The machine malfunctioned and the high-pressure spray lacerated his left foot.,1
"An employee fell off a ladder while trying to get merchandise down from a shelf, fracturing his lumbar vertebrae and requiring hospitalization.",1
"An employee was using a saw with a masonry blade to cut concrete caps to put on a modular brick wall. When he bent over to make a cut, the saw blade lacerated his left leg, requiring hospitalization.",1
"On Saturday, July 8, 2017, at approximately 10:15 a.m., an employee had just strapped down lawncare equipment to a flatbed trailer. As he made his way off the trailer, he tripped over one of the straps he had just tightened down. He fell over the side, striking the ground and an adjacent concrete curb. He fractured his right tibia and fibula.",1
"An employee was operating an electric pallet jack and making a left turn when he hit a modular storage rack. He raised his right leg up, but his lower left leg was trapped when the bottom standing platform ran under the bottom brace of the modular. He suffered a deep puncture and broken left tibia.",1
An employee was transferring a transformer to a new pole when the employee's index fingertip was caught and amputated between the transformer and the bucket.,0
"An employee stood up from a chair, lost her balance, and fell to the floor, breaking her left hip.",1
"An employee was carrying a tray of drinks in an area where a customer had spilled a drink. She slipped and fell on the spilled drink, fracturing her right ankle and leg.",1
"On Saturday, 7/8/17, at 1:45 p.m., an employee was operating a press when one of the employee's fingertips was caught in the machine. The employee was hospitalized.",1
"On July 8, 2017, an employee stumbled and fell in the kitchen area, breaking her kneecap.",1
"An employee slipped and fell off a ladder, fracturing an elbow.",1
"An employee was learning how to operate a plastic rolling machine when his body was caught in the machine's roller and wrapped in plastic. He broke his right arm, a shoulder, both legs, and six ribs.",1
"The employee was repairing a single rim truck tire when the tire exploded and struck the employee on the ankle, fracturing it.",1
An employee was stocking glass bottled beer when one of the bottles exploded. A glass shard struck the employee's left eye.,1
An employee was moving cows through a gate when a cow pushed against the gate and crushed his fingers. His middle and ring fingertips were amputated.,0
An employee was standing at a check-in kiosk and was struck by a powered wheelchair resulting in a leg injury.,1
An employee tripped on a lashing platform and fractured his right leg.,1
"The employee had finished cleaning and sanitizing the icing machine and was moving the icing machine back into its operational position on a fry line. The employee lost balance and grabbed the machine to prevent falling. While attempting to gain balance, the employee suffered a partial amputation to the left middle finger pad.",0
"While driving a standup forklift, an employee collided with a second forklift. The forks pierced through the employee's shoe and contacted the left foot. The employee's left pinky toe was amputated.",1
An employee was sitting on a casing pipe. The road bore operator could not see the employee and then activated the machine and moved it forward. The right leg of the employee sitting on the pipe became caught/pinched between the track and pipe. He suffered a broken tibia and was hospitalized.,1
"An employee was hand feeding a plastic board into a table saw's rotating blade to fabricate a replacement part for dumper guides/rails when the plastic piece kicked back, causing the employee to momentarily lose control of it. His hands continued to move forward and his left middle fingertip contacted the rotating blade and was amputated. The blade was unguarded at the time of the incident.",0
An employee was riding in the basket of an aerial lift while installing exterior rigid insulation on a house when the employee made contact with the house's electrical service drop. The employee suffered an electrical shock and second degree burn to the right hand.,1
An employee was delivering mail to a residence when a swarm of bees began stinging her 6 to 10 times in the forehead and the back of the neck. She suffered a severe allergic reaction and was hospitalized.,1
"An employee was helping a coworker remove a 5/8"" bolt on an inlet to service a valve that was 2"" from the wall. The employee was checking the depth of the nut on the bolt when the coworker turned the nut with a wrench, pinching and severing the employee's right ring finger skin to the bone.",0
"An employee was talking to a coworker. His left hand was placed against a door frame he was leaning against. Another coworker opened the door and entered the area. As the door automatically closed, it pinched and amputated the employee's left little fingertip, which had slightly shifted into the doorway.",0
"An employee was using a riding mower to mow the grass when he drove into a pond. He reached out to grab onto something and contacted a pulley or belt on the mower, lacerating his right hand and fingers. He was hospitalized.",1
"On July 10, 2017, at about 1:30 p.m., an employee was working on the deck of a barge when he felt hot and started to cramp. He was hospitalized for heat exhaustion and dehydration.",1
"An employee tripped and fell to the concrete floor, breaking a hip and requiring hospitalization.",1
"An employee was operating a lift gate on a box truck when a blanket used to protect and move product slipped down between the lift gate and the box truck. When he attempted to move the blanket, his left hand was caught and amputated between the gate and the truck.",1
An employee was unloading a semi-trailer with a pallet jack when the employee's head became wedged between a product box and the door or wall of the semi-trailer. The employee suffered a concussion.,1
"An employee was overcome by heat stress while loading a rig at a pipeline construction site, requiring hospitalization.",1
"An employee was tightening a chain on a roll-off-bin. He was ratcheting the links in the chain when his left ring finger was caught and fractured in a pinch point, requiring hospitalization and surgery.",1
"At approximately 4:10 a.m., employees were mulching a median/island between a four-lane road. One of the company employees was using a gas powered, hand held, back mounted blower to blow off the curb and was struck by an oncoming car. The injured employee was hospitalized with facial, leg and rib fractures, facial lacerations and abrasions over various part of the body.",1
An employee was conducting electrical work in a non-ventilated building under construction with a temperature of 110 degrees and fell 6-7 feet from a ladder. The employee struck his head on the concrete floor and sustained severe head injuries requiring surgery and hospitalization.,1
"An employee was entering the cab of his delivery truck when he fell backwards and struck his head on the ground, losing consciousness and suffering cuts and bruises.",1
An employee was loading parts on a conveyor when one of the parts caught and pulled the employee's gloved hand and arm into the machinery. The employee's right arm was amputated. The machinery was unguarded at the time.,1
An employee was putting a chain back on a conveyor line when the conveyor was activated and amputated two of the employee's fingertips. The equipment was not locked out at the time.,0
A table with a flat bar weighing approximately 816 pounds fell on and fractured an employee's right lower leg.,1
An employee was using a meat cutter when the blade cut his left thumb.,1
An employee was using a meat saw to cut meat when the sawblade cut his left thumb. His left thumb had to be surgically amputated.,1
"An employee was cleaning flamingo pools when he slipped on algae and hit his head, requiring hospitalization.",1
An employee was operating a body maker press and caught his finger in the press resulting in fractures and a fingertip amputation.,0
An employee was guiding a trailer-mounted compressor that was suspended by the bucket of a loader. He had positioned the suspended compressor's trailer hitch so that it could be lowered onto a tow vehicle's pintle hitch when his left foot/ankle was struck and ran over by the loader's left front wheel. He was hospitalized.,1
"While moving fixtures, an employee bumped into a fire extinguisher that then fell on and amputated the employee's left index finger.",0
"An employee was using a hoisting mechanism to retrieve pile driving rods from a casing when a sling slipped off a rod, allowing the rod to fall, strike, and fracture the employee's right shoulder.",1
An employee was attempting to unjam a bar soap stamper machine when his left ring and pinky fingertips were amputated.,0
An employee was moving a liquid nitrogen round cylinder onto a special delivery cart to hook the top of the cylinder into place when a cylinder moved and caught the employee's fingers between it and the cart. The employee's right third and fourth fingertips were amputated.,0
"An employee was disconnecting propane lines from the top of powder-coating ovens. The employee stepped onto the roof of the oven and the ceiling collapsed, causing him to fall to the floor below the oven. He broke his leg and injured his arm.",1
"An employee was helping to erect five rack frames. Before braces could be affixed to the frames, the C-clamp that was holding the second frame upright failed, causing the frame to fall on the employee. The employee was hospitalized with a fractured left tibia, ruptured ACL, and a joint bleed.",1
An employee was cutting 2x4 pieces of lumber at a radial arm saw when the saw blade amputated the employee's left index and ring fingers.,0
"While climbing an access ladder through a roof hatch, an employee slipped and fell to the ground, suffering a lower leg fracture that required hospitalization.",1
"An employee was filling a molten unit. The discharge valve was closed at the time, and the line over-pressurized. The line burst, spraying the employee with scalding water that caused second and third degree burns to the ears, neck, hands, and chest.",1
An employee fell while trimming a tree and suffered broken ribs.,1
An employee was cleaning the restroom and was hospitalized for dehydration.,1
"On 7/10/2017, at 11:20 p.m., an employee was troubleshooting a jammed nut feeder and pushed on a component he believed to be stuck. This freed the nut slide, causing it to retract and catch his right index fingertip, partially amputating it.",1
"An employee was climbing a ladder to exit a mechanic service pit when the ladder slipped out and he fell 3 feet. He hit the edge of the pit, which was made of concrete and metal, bruising his lower right side and breaking four ribs in his lower left side on the back.",1
"An employee was placing a car on a transport trailer. While descending the ladder, the employee lost balance and fell injuring the right elbow and knee.",1
"An employee operated a powered industrial truck to load a truck trailer. Co-workers then found the employee laying face-up on the dock plate, bleeding from the head and unconscious. A possible tripping hazard was identified. The employee was hospitalized.",1
An employee was checking to see if the proximity switch in a mold handling machine was blocked when the machine moved and caught the employee's middle fingertip between a bracket and a mold cart. The employee's fingertip was amputated.,0
An employee was attempting to sand the edge of a paper roll in a paper winder when the employee's finger was caught and partially amputated in a pinch point. The winder was unguarded at the time.,0
An employee was cleaning saw dust from a wood edger when his left middle finger was caught and amputated in the edger.,0
"An employee was troubleshooting an engine on a piece of equipment when a fire occurred, burning the employee's left forearm.",1
"On July 11, 2017, at approximately 1:55 p.m., an employee was operating a hand grinder to grind down a metal spur on a machine component when the grinder slipped from his hands. The grinder then bounced back and hit him in the face, causing a facial fracture/laceration. He was hospitalized and had surgery.",1
"On July 11, 2017, an employee was installing thermal materials on top of a newly constructed metal building when the employee fell 11 feet to the ground, suffering severe back injuries that required hospitalization.",1
"An employee tripped over a cord protector on the floor. She fell onto her left wrist and broke it, requiring surgery and overnight hospitalization.",1
"An employee was using a brake press to bend parts when his right hand was caught by the press blade, amputating his right thumb tip.",0
"An employee was attempting to stop a rotating bundle of steel tubing when the pieces of tubing shifted and pinched the employee's left middle and ring fingers, amputating the fingertips.",0
"An employee climbed a telephone pole and was drilling into it when the employee hit the powerline and was shocked and burned. The transformer blew up and the employee flew off the pole. While the employee was in mid air, the broken powerline swung off the pole and hit the employee's belt, shocking the employee again before the employee fell to the ground.",1
"While getting down from a fitting room stool, an employee tripped over the stool and fractured the right femur.",1
An employee was caulking exterior panel joints on a man lift under direct sunlight with a heat index of approximately 109 °F. The employee suffered heat stroke and was hospitalized.,1
"An employee was sanding drywall and going from bathroom to living room while wearing stilts (40 inches above the ground) when he fell, twisting his right leg and fracturing his right fibula.",1
An employee was descending a ladder when he slipped and injured his ribs and left scapula.,1
"An employee was collecting household garbage and was walking behind a waste collection truck when an unknown chemical splashed on him as the hopper was being cycled. The chemical burned his ear, jaw, arm, and leg.",1
"An employee twisted the left leg while stepping off a 20-inch-high platform, fracturing the left knee and ankle.",1
"An employee was repairing an electrical generator when the motor started unexpectedly, amputating two of his fingers. The generator was not locked/tagged out at the time.",0
"An employee was holding some rigging when it moved, catching his hand and amputating a fingertip between the rigging and a pipe.",1
"On July 11, 2017, an employee was unjamming web fabric from a cutting machine when the blade came down and amputated her left index fingertip.",0
"Two employees were moving hot water heaters from the ground to a third floor balcony. While moving the equipment in a box on a forklift, an employee stepped into the box to retrieve the last hot water heater and the box fell off the forklift. The employee fell three stories and fractured vertebrae.",1
An employee slipped and fell while cleaning a swimming pool area. He tore a right hip ligament/muscle and was hospitalized.,1
An employee was reaching for a part on a saw when his arm hit the clamp switch. His left pinky fingertip was then crushed and amputated between the part and the main saw vise.,0
An employee plugged a carrier case light into an extension cord that was defective and received an electrical shock. He was hospitalized.,1
"An employee slipped and fell 10 feet while connecting steel beams, striking structural steel and the ground. The employee suffered a fractured forehead and was hospitalized.",1
"An employee was cleaning a product belt when his glove became caught between the belt and a guide. As he pulled his hand back, his left pinky finger was amputated.",0
"An employee was working on a vehicle when his left hand was caught in the belt and gears, amputating his middle and ring fingertips and his pinky finger to the first knuckle.",0
An employee was sandblasting an iron tower when the employee dropped or lost control of the sandblaster and the grit blast material penetrated the employee's upper leg. The employee was hospitalized and had surgery.,1
"An employee slipped and fell on spilled soda, fracturing her left knee and requiring surgery. She was hospitalized overnight.",1
"An employee was removing a bale of material that had settled into a grated auger opening. As he reached to replace the grating over the auger, his right middle fingertip was caught and amputated between the grating and the running auger.",0
"An employee was standing up from a crouched position and put his left hand on the upper part of a hinged window. While the employee was standing, the hinged window closed on the employee's left ring finger removing the finger nail, skin below the finger nail and a small portion of bone resulting in amputation to that portion of the finger.",0
An employee was climbing down a ladder into a manhole and slipped and fell. The employee landed on his right ankle fracturing it.,1
"An employee was monitoring as an electrical crew used a pulley system to pull conduit when the pulley plate broke loose and struck the right side of the employee's body. The employee suffered a broken elbow and forearm, as well as contusions to the hip area and below. The employee was hospitalized and had surgery.",1
An employee was replacing silt fabric in a catch basin. The employee's right hand was crushed when the catch basin drain cover dropped on it. He was hospitalized with two broken fingers and two lacerated fingers.,1
"An employee tripped over a cord while taking a blood pressure reading on a patient, falling to the ground and suffering a broken pelvis.",1
An employee was helping a patient go to the bathroom when the patient hit the employee. The employee was hospitalized with a concussion and cervical strain.,1
"An employee stepped on a log and slipped. He fell backward and landed on a rock, resulting in a broken arm that required surgery.",1
"An employee was working with a wet vacuum on a wheelchair lift that was on a platform. When she pulled the hose, she fell 4 feet off the platform and hit her head.",1
An employee was helping to operate a metal shear. He was behind the machine when it cycled. The backstop came down and caught his hand between it and a material handling cart. He injured his right-hand palm and was hospitalized.,1
An employee was installing a fire system from a ladder. He stepped awkwardly off the ladder and suffered muscular/tendon damage to his left knee/ankle.,1
"An employee had just seamed two rolls of fabric together and started a fabric coating machine. He was attempting to clean accumulated latex material off one of the tension rollers when his left forearm was pulled into the machine, fracturing it.",1
An employee was conducting maintenance activities on the recycle material system of a lamination machine. The employee's right hand was caught in a butterfly valve when the valve closed. The employee sustained an avulsion and partial amputation of the index finger and an avulsion and fracture of the middle finger. The equipment was not locked out at the time.,0
"An employee was climbing an A-frame ladder to perform aircraft maintenance lubrication when the employee took a wrong step on the ladder and fell to the ground, breaking five ribs and puncturing a lung. The employee was hospitalized.",1
"An employee was walking away from a furnace when molten metal sprayed from the furnace's crucible hole and contacted his foot, causing second degree burns.",1
"A powered pallet jack struck an employee in the leg. The employee's leg broke, requiring hospitalization.",1
An employee was operating an electric pallet jack and was in the freezer to check inventory when a forklift struck and cut the employee's leg.,1
"An employee was using a stainless steel, 72-inch-long probe to break up frozen vegetables in a hopper when the stainless steel probe came into contact with the mechanical cluster buster at the bottom of the hopper, causing it to twist and pinch the employee's pinky fingertip between the top of the hopper edge and the stainless steel probe. The fingertip was amputated.",0
"An employee was using an air blower to blow residual out of a toll die when the die closed on the employee's hand, breaking fingers. The toll die was not locked out at the time.",1
"While exiting the back of a truck, an employee lost his balance and fell to the floor, suffering a head contusion and left leg fracture.",1
"On July 12, 2017, an employee was using a wrench to remove a line plug from a hydraulic cylinder while it was resting in a wooden cradle (block) on top of a machine's sub-frame. The wrench breaking the line plug loose created a jarring motion that caused the 620-pound hydraulic cylinder to shift and fall (3.5 feet) off the elevated surface and onto the employee's lower leg, fracturing the right tibia. The employee was hospitalized.",1
"An employee was retracting a portable winder chuck to release a film roll when his right middle finger was pinched, removing some skin and his fingernail.",1
"On July 12, 2017, at approximately 1:30 PM, an employee was delivering mail when he began to feel dizzy. He was hospitalized with dehydration.",1
"An employee tripped on a landing and fell, fracturing her clavicle and dislocating her shoulder.",1
An employee was bending over when he hit his left eye on the corner of a metal filing cabinet. He suffered a severe left eye laceration.,1
"An employee was working in a man basket when he contacted a high-voltage powerline (7,800 volts) while pulling fiber optic cable through trees. He sustained electrical burns to the neck, both arms, and a hip.",1
"On 7/12/17, an employee was attempting to put a misaligned van door back on track when the door quickly slid closed and amputated a fingertip on his right hand.",0
"An employee was climbing on a rack to pick up product when the employee fell approximately 25 feet from the rack to the ground, breaking the left wrist and hip. The employee was hospitalized.",1
"An employee was running wires in order to install an additional disconnect to a temporary power bank when an arc flash occurred. His right forearm was burned, and he was hospitalized.",1
"An employee and coworkers were finalizing repairs on a shot blast machine and had re-energized it. The injured employee was still troubleshooting the machine when someone pushed the start button, causing the machine to cycle. The employee's foot and lower leg were caught and crushed by the moving parts, requiring hospitalization.",1
"On July 12, 2017, at approximately 3:00 p.m., an employee was using a sling to remove an oil cooler from an engine. As he started to move the cooler sideways, it became unbalanced and flipped out of the sling. It fell approximately 5 feet, hit the concrete, tipped to the side, and impacted the employee's left leg.",1
"After working on a roof pulling a whip hose for 8 hours, an employee suffered from heat exhaustion and was hospitalized.",1
"An employee fell 10 feet to the concrete ground while painting a townhouse roof, fracturing the left hand/arm and the right hip.",1
An employee was struck by a forklift that was backing up. The forklift ran over and lacerated his right ankle.,1
"An employee experienced heat-related illness after delivering mail. He became dizzy and felt faint, requiring hospitalization.",1
The employee was moving a pallet of freight with a pallet jack onto the lift gate. It began raining and the employee slipped and lost control of the pallet jack causing one of the plastic totes on the pallet to come off and strike the employee resulting in rib fractures.,1
An employee was working on the melt deck in a foundry. The employee was chipping out a liner with a chip gun and replacing the lining in the spout when he felt dizzy and began to throw up on the floor. His condition worsened and he began sweating profusely and was not lucid. He was hospitalized with an acute kidney injury as the result of heat-related illness.,1
"An employee was stepping down from a work truck when he fell, landing on his right hip and hitting his head on the concrete. He suffered a fractured skull, bruised right hip, and elbow laceration.",1
An employee was on a delivery route when he began feeling sick due to heat exhaustion. He was hospitalized.,1
An employee was exiting the cab of a truck when he lost his balance and fell approximately 3 feet to the ground. He fractured his left lower leg and was hospitalized for surgery.,1
"An employee fell from a curb while walking and broke his ankle, requiring hospitalization.",1
An employee fell when his foot was caught on a pallet. He suffered a left distal femur fracture.,1
An employee was cutting an aluminum handrail bracket with a miter saw when the blade lacerated the area between the fingernail and knuckle of his right pointer finger. He was hospitalized.,1
"An employee fell about 10 feet off a propane storage tank while painting it, suffering ankle and heel fractures.",1
"An employee was greasing valves when he dropped the grease hose. As he was reaching to stop the hose from hitting the ground, the handle struck the ground and was engaged, shooting grease up into his eye.",1
"An employee fell while walking down stairs from a building, breaking ribs and lacerating his head.",1
"An employee fell from a truck to a lower level while moving a fuel hose, suffering a fractured hip and arm injury. The employee had surgery.",1
"An employee was holding a ladder for a coworker when a piece of metal fell and struck the employee's left arm, lacerating it. The employee was hospitalized.",1
"An employee was moving and rearranging traffic cones on the shoulder of the road when a car struck him from behind. He was hospitalized for a possible fracture to his lower leg, lacerations to his right cheek and right lower lip, and abrasions around his face and arms.",1
"An employee was installing an 18-inch pipe in a pipe rack when the pipe moved and struck him, fracturing his left arm.",1
"On July  12, 2017, at 11:05 a.m., an employee was moving a barricade to reopen access to an area of the building when he lost consciousness and fell. The back of his head struck the floor, damaging his skull and requiring surgery.",1
"While performing masonry work from a scaffold plank, an employee tripped and fell 3 to 4 feet to the ground, breaking a rib and requiring hospitalization.",1
An employee was on a ladder climbing out of the basin of a water treatment facility when he fell 10 to 15 feet from the ladder to the concrete surface below. He suffered ankle and hip injuries that required hospitalization.,1
"An employee was hospitalized after a stack of slip sheets fell and hit his right leg, fracturing it.",1
"An employee was emptying a roll off container. While opening the latch, the handle popped up and caught the employee's pinky finger resulting in a fingertip amputation.",0
An employee was operating a chop saw when it was activated via the foot pedal. The sawblade then amputated the employee's thumb and index finger.,0
"An employee suffered a back injury while lifting/moving products in the warehouse, requiring hospitalization.",1
"An employee was driving a rough terrain lift down a road and moved toward the ditch to allow a car to pass. The lift then rolled into a ditch and overturned. The employee suffered broken ribs, a lacerated lung, and an L1 vertebra fracture.",1
An employee was welding when his shirt caught on fire and he suffered burns.,1
An employee was using a 30-foot water fed pole to clean windows. The pole hit a power line and the employee was electrocuted.,1
The employee was trying to troubleshoot a motor. His hand slipped into the rotating motor blades resulting in amputation of the right middle and ring fingertips.,0
"An employee dismounted a stand-up forklift as it was coming to a stop. The forklift continued moving and lacerated his left foot, requiring hospitalization.",1
"While performing maintenance on a broccoli planter, an employee received an amputation injury to his left index finger.",0
"An employee was repairing an electrical circuit in a crane cab when an electrical current passed through the employee's right hand, causing arc flash burns.",1
An employee became pinned beneath an anchor shank as it was lowered to the dry dock floor. The employee suffered bruising and a fractured spine.,1
"An employee was rebuilding a snipper drum that was elevated. When the employee released the drum, it fell and pinched his right middle finger, amputating the fingertip.",0
An employee experienced muscle cramps while driving cattle from cattle pens to a plant. The employee was hospitalized overnight for dehydration.,1
"An employee suffered from heat-related illness while digging a hole to find a water leak in a 1-inch service line, requiring hospitalization.",1
"An employee opened a gate so he could drive through on his forklift. The gate then started swinging back. When he tried to catch the gate, it broke his hand.",1
"An employee slipped and fell 8 feet to the ground while checking seals on an RV roof, breaking the left leg and requiring hospitalization.",1
"On July 13, 2017, an employee was moving a molding pattern from a staging rack to a plywood skid. The employee was lifting the pattern with a hoist when the bolt pulled out of the pattern. The pattern fell on the employee's lower legs. The employee suffered shin avulsions and a broken left leg.",1
"An employee was operating a saw as a forklift driver set lumber on it. The employee's left middle fingertip was crushed between the lumber and the saw's backrest. When he pulled his hand out, his fingertip was amputated.",0
"While delivering packages, an employee suffered stomach cramps due to heat stress, requiring hospitalization.",1
An employee was using a water hose to rinse a chiller with water that was 140 degrees when he began to experience cramps in both legs due to heat stress. He was hospitalized for dehydration.,1
An employee was working on a pre-feeder die machine when a rotating die amputated the employee's left index finger.,1
"An employee was breaking a truck seal when the dock door cable failed, causing the door to fall and strike him on the back. He suffered back and knee injuries.",1
"On July 13, 2017, an employee stepped out of her vehicle and fell to the ground. She broke her leg and required overnight hospitalization and surgery.",1
"On July 13, 2017, at 3:45 p.m., an employee was working from a ladder that was positioned on stairs when the ladder became displaced and he fell. He suffered a coccyx contusion, dorsal lumbar sprain, dorsal vertebrae fracture, and coccygeal fracture, requiring hospitalization.",1
"After mixing liquid components of elastic patching material for airfield lighting work, an employee had an allergic reaction that affected his respiratory functions and was hospitalized.",1
An employee was trying to park a pallet jack when his right foot was pinned and fractured between the pallet jack he was parking and the jack parked in the space next to him. He was hospitalized.,1
"An employee was driving nail spikes with a 6-pound sledgehammer when the hammer struck his right hand, fracturing his index finger. He was hospitalized.",1
"An employee was removing a fitting roll device from a calendar machine. The device came off with unexpected force and struck his left fifth finger against a guardrail, fracturing and lacerating it. He was hospitalized.",1
"An employee was attempting to run paper bags through a printing press. He jogged the paper into place. His left hand was on the press cylinder when it rolled, amputating his left thumb below the nail bed and crushing his left index and middle fingers.",0
"An employee was on the second step of a ladder pulling down a box of paper towels. The box moved, and he twisted and fell to the floor, hitting his head. He was hospitalized.",1
"An employee was delivering mail along a route in an open mail truck. Around 5 p.m., he began experiencing hand and leg cramps. The cramping persisted overnight and he was hospitalized the next morning for heat-related illness.",1
An employee was performing maintenance on a hot oil unit when his right pinky fingertip was caught and amputated on the pump.,0
"An employee suffered heat stress while dumping trash cans on a garbage truck, becoming lightheaded and losing consciousness. The employee then fell and struck their head on the truck frame, suffering a head laceration that required stitches. The employee was hospitalized.",1
Five sheets of leaning drywall fell on top of an employee who was walking through the area. The employee suffered a broken leg and was hospitalized.,1
"On July 13, 2017, an employee was riding in a golf cart being driven by a coworker when the coworker lost control and the golf cart tipped. The employee fell to the concrete road, lacerating her right foot and requiring hospitalization.",1
An employee suffered a left middle fingertip amputation while disconnecting a cart from an aircraft that was being serviced. He was hospitalized.,1
An employee fell 15 feet off a roof after servicing an HVAC unit.,1
"An employee was attempting to shackle a cow that had survived the slaughter process, using a chain connected to a winch. As the cow was rolling around, the employee attached the chain to the cow and started the winch. When the winched tightened, the chain also tightened and pinched the employee's fingers, amputating the left middle and index fingers.",0
"An employee was cleaning around the non-operator side of a press charger when the employee slipped and his left hand landed on a gear rack, fracturing four fingers. The gear rack was unguarded at the time.",1
"An employee had removed an old hammer mill screen and was installing the new screen when his right ring finger was pinched between the hammer mill's support cage bracket and the hammer mill screen, amputating the distal phalanx.",0
"An employee was operating a horizontal band saw when the blade amputated his right pinky, ring, and middle fingers.",1
"An employee was climbing a ladder when it slipped out from beneath him. He fell and injured both ankles, requiring hospitalization.",1
"An employee was performing an electrical study. While he was taking a fluke meter reading on the building's main switch gear (1600A, 480V 3 phase), an arc flash occurred and the fluke meter blew up in his hands. He suffered second degree burns to the hands, arms, neck, face, and eyes, requiring hospitalization. PPE was not worn at the time.",1
An employee was pulling wire through a die on a draw block machine when the employee's left ring finger was caught and amputated between the machine's jaws and the drum.,1
An employee fell 20 feet from a commercial roof.,1
An employee was bitten by a snake on his right ring finger while reading the water meter at a residence.,1
"An employee was attempting to remove a connecting collar using a wrench. The wrench slipped and he fell off the trailer, landing on the ground. He broke his hand and pelvis.",1
"An employee was working at a rotary table and attempted to a lift a cylinder journal that weighed 98 pounds. She immediately went to set the journal down on the nearest available surface. While she setting the journal down, her left ring finger was pinched between the journal and the table, partially amputating her fingertip.",0
"An employee received chemical burns to the lower extremities while performing sanitation duties, requiring hospitalization.",1
"An employee was attempting to remove a piece of chicken from a breast processor sawblade when the employee's right hand contacted the blade, amputating the pinky fingertip and lacerating the other fingers.",0
"On 7/13/17, an employee changed out the back-up rolls at a tandem when he noticed a leak in a pipe and stepped inside the pit. His foot slipped and he fell, striking his head against the track rail that is used to move the back-up rolls. He suffered fractured ribs, fractured vertebrae, and head lacerations.",1
"After making a delivery, an employee suffered muscle cramps, weakness, and dizziness due to heat illness, requiring hospitalization.",1
"An employee was looking for material that was stored on racks when he lost his footing and fell backwards, lacerating his left elbow on a piece of metal that was stored on the racks. He was hospitalized for surgery.",1
An employee was chopping cilantro when the knife amputated her fingertip.,0
"An employee was using a core cutting machine to finish a 3-foot-diameter cut when the machine's top cover came loose and rotated into a hydraulic line. The line then whipped and struck the employee's leg, while the cover struck his back. He suffered leg and back lacerations and was hospitalized.",1
"An employee slipped and fell while walking in the lobby, twisting/rolling an ankle.",1
An employee was cutting a board using a circular saw when the sawblade amputated the employee's fingertip.,0
"An employee was repairing an electrical meter for street lights when an electrical flash occurred, resulting in first and second degree burns on his arms and face. He was hospitalized.",1
"An employee was unloading pipe racks and drill collars when one pipe rack hit the other pipe rack, causing the load to shift and strike his lower leg. His lower leg broke and had to be amputated.",0
An employee was welding and attaching a manual load clamp when the employee's left little fingertip was caught and amputated in the clamp.,0
"An employee was using a saw to cut blocks when his right hand contacted the blade, amputating three fingers and pinching his thumb.",1
An employee was working with chemicals and pouring phenol into a reactor when the chemical splashed and caused chemical burns to the employee's left leg and right foot.,1
"On 7/14/2017, at approximately 1 PM, an employee was downloading a chemical from a bulk truck using a hose. When he attempted to remove the hose, it was still pressurized, causing it to release chemical that splashed on the employee. He suffered chemical burns and was hospitalized overnight.",1
"An employee was operating a forklift to move a load of tires. One of the tires slid off of the stack, so he stopped the forklift to move the tire. Another forklift hit the load and pinned the employee between the load and an adjacent wall, breaking his leg.",1
"An employee was performing maintenance on and cleaning a conveyor that moves powders up to a reactor when he noticed powder coming out of an elbow on the conveyor's powder tube. As he was checking the powder's consistency, his right index finger pushed through the powder and was caught in the conveyor's belt linkage, amputating his fingertip.",0
"An employee was exposed to mildew while replacing a cabinet that was damaged by a water leak. He had an allergic reaction and suffered respiratory irritation, requiring hospitalization.",1
An employee was manipulating a piece of concrete with a burke bar when the employee's left middle finger was caught and amputated between the bar and a piece of pre-cast concrete.,0
"An employee was shrink wrapping a pallet and had mounted a box to reach the plastic wrap when the employee fell to floor, suffering a fracture.",1
"An employee was repairing a rough terrain forklift when a hydraulic line failed and the forklift's mast came down quickly, crushing his knee against the ground.",1
"An employee was climbing down a fixed metal ladder when he slipped and fell about 8 feet to a concrete mezzanine, breaking his tibia and injuring his shoulder ligament. He was hospitalized.",1
"An employee fell off a ladder while installing electrical wiring, suffering a broken arm and wrist and a facial laceration.",1
"An employee was hosing down a wall in the warehouse when water from the wall leaked onto loose electrical wires or into an electrical outlet/light switch. When the employee opened the door to leave, he received an electric shock. He suffered second and third degree burns to the right forearm, requiring hospitalization.",1
"An employee was crossing the street when she was struck by a car, suffering a possible spinal cord injury.",1
"An employee was operating a forklift when the employee's finger was caught between the forklift cage and a beam, amputating the fingertip.",0
"While rigging down after working for 12 hours, an employee began feeling weak and displaying signs of heat exhaustion. The employee was hospitalized.",1
"An employee was changing bags on a bag tail blower on a packaging machine. While she was unhooking a bag from the blower, the blower motor lacerated her right index finger. Her finger had to be amputated at the fingernail.",0
An employee was attempting to adjust a chain that was being used to hoist a load when the employee's left thumb tip was pinched and partially amputated between the chain and the piece of equipment.,0
"An employee was moving a conveyor system when it tipped over and fell on the employee. The employee broke a leg, fingers, ribs, and vertebrae, requiring hospitalization.",1
"An employee was attempting to reposition a pipe that was being cut on a semi-automatic pipe band saw. His left hand was on the pipe when the hydraulic pipe clamp was activated. His left middle fingertip was then caught between the clamp palate and the pipe's side wall, requiring surgical amputation.",0
An employee was operating a machine when his right index fingertip was pinched and amputated by a vise clamp.,0
"An employee was entering the building when he slipped on the floor and ran into a bollard, breaking his left ribcage.",1
"An employee was pulling scrap from a beam saw when the compressor/die came down and crushed his left ring fingertip between pieces of wood. As he pulled his hand back, his fingertip was amputated to the first knuckle.",0
"An employee was reversing a power pallet jack when he was struck by a forklift, fracturing his legs and requiring hospitalization.",1
"An employee was servicing an HVAC system in a ceiling crawl space. As she was walking in the crawl space, she stepped on a closed access panel that suddenly opened. She fell to the ground below and hit a table, fracturing her hip.",1
An employee was operating a panel saw to cut wood when the blade struck and amputated his left pinky fingertip.,1
"An employee was attempting to plug a power tool into a receptacle outlet while stepping over a wire rope sling that was laying on the floor. He tripped over the wire rope swing, fell, twisted, and hit the floor, fracturing his right femur.",1
Three employees were performing masonry work on a scaffold that collapsed and they hit the concrete ground. One employee was hospitalized for a head laceration requiring stiches and contusions.,1
An employee was operating a drill press when the rotating bit caught his glove. The press then amputated his left thumb tip (no bone loss). The press was not guarded at the time.,0
An employee was installing a railing on the third-story breezeway of a new apartment construction when he fell approximately 20 feet to the ground below and was hospitalized with multiple injuries. There was no guardrail and fall protection was not worn at the time of the incident.,1
"An employee lost balance and fell to the floor, fracturing the left hip and requiring hospitalization.",1
"An employee was inspecting a pallet jack before usage when he was pushed by a high riser driven by a coworker. His foot was pushed underneath the pallet jack, breaking a metatarsal bone.",1
"An employee was carrying materials back to her workstation when she slipped, striking her chin against a dolly as she fell to the floor. She suffered a concussion and was hospitalized.",1
"On Friday, July 14, 2017, at approximately 12:15 PM, an employee was guiding cans (printing equipment) to a forklift platform when a can behind her fell and struck her left knee and lower leg. She was hospitalized with a crushing injury.",1
"An employee was making adjustments on a V pusher when the machine’s V flap came up and caught the employee’s left ring fingertip, amputating the finger pad.",1
"An employee was cleaning the gears of a printing press when the employee's right hand became caught in the gears, amputating the thumb, index finger, and middle finger.",1
An employee was at the airport walking away from the baggage claim area with her luggage and computer case in front of her. The luggage fell in a hole on the concrete sidewalk causing the employee to trip and fall over the luggage. The employee was admitted to the hospital for a fracture to the right elbow.,1
An employee was cutting a board on a table saw when the saw amputated two of his fingers.,0
"An employee was trimming a tree away from utility lines when he fell and struck the tree's lower limbs, fracturing two ribs.",1
"While conducting maintenance and repairs to the building, an employee became dizzy and fainted, falling into a pile of scrap metal. The employee suffered multiple fractures and lacerations, requiring hospitalization.",1
"An employee was operating a pressure washer while cleaning a loading dock when the washer wand and spray passed over the employee's foot, injuring it and requiring hospitalization.",1
"An employee was pinned between a gang box and a wall, suffering a bruised spleen, fractured pelvis, and fractured L1 vertebra. The employee was hospitalized.",1
"An employee was hanging sheet rock when he became sick due to possible dehydration. He passed out, started shaking, and fell, striking and scratching his face.",1
"An employee fell 7 feet off the top of a step ladder while painting, breaking his wrist and hip.",1
An employee was cutting film stock after it was spooled when his knife amputated his left thumb tip.,0
"An employee was operating a press when a part and the draw pad became stuck on the bottom of the die. The draw pad was under extreme pressure. As the employee tried to pry the part off of the die, the part released, causing the draw pad to spring up. This broke the bolts containing the draw pad, and the draw pad hit and fractured the employee's wrist.",1
An employee was trimming trees when a tree limb fell on and fractured the employee's left lower leg.,1
An employee was picking up water bottles near the guard gate when a black snake bit his index finger. He was hospitalized.,1
"An employee was handling a metal part as it was being forged in a forging hammer when the part shattered. A hot metal shard shot out of the forging hammer and punctured the employee's abdomen, causing internal damage. He was hospitalized.",1
An employee's fingertip was caught and amputated in a closing safe door.,0
"An employee was pushing a pallet of water inside the store on a pallet jack while a coworker pulled it. They stopped to begin stacking the cases. The pallet fell from the pallet jack and landed on the employee's right second toe, amputating it.",0
An employee was delivering a refrigerator at a customer's residence when he slipped on the floor. The refrigerator and dolly then fell on and broke his ankle.,1
"An employee was performing preventative maintenance on a loop car while standing on grating. As he was checking the wheels of the loop car, the grating gave way and he fell through the opening to the next level below, injuring his ankle. He was hospitalized.",1
An employee fell through a 1/4 inch transit board resulting in a C7 fracture and a broken femur.,1
"An employee was repairing a leaking 40-pound pipe when it fell on his right foot, lacerating and fracturing it. He was hospitalized overnight and had surgery.",1
"An employee was attempting to build a wooden base for a manual sheet metal box pan brake. He lifted the brake onto the forks of a forklift. He then aligned the brake over bolts to secure the brake to the wood base. He exited the forklift and stood in front of it to make adjustments. He was leaning over to kneel on the floor when the brake slid off the forks and fell on him, trapping him underneath. He suffered a pelvic fracture, knee injury, and bruising and was hospitalized.",1
"An employee was helping a coworker drill pilot holes through a wooden block. The coworker was operating the drill while the employee checked the hole alignment when the drill bit cut through the block and contacted the employee’s right index finger, amputating it to the first knuckle.",0
"An employee was helping a forklift operator stack empty sacks on a pallet. The forks of the fork truck were raised, and the employee's right index finger became stuck in an open hole in the fork, amputating his fingertip.",0
An employee slipped and fell and the employee's head struck a railing. The employee was hospitalized.,1
An employee was attempting to clear a jam on a riveting machine when the rivet head fell on and amputated the employee's right index finger.,0
An employee was lifting a plate on a trailer while trying to pull onto a chain with force when he experienced sharp pain in his abdomen.,1
An employee was clearing a downed tree and debris from a trail. She was rolling a log out of the way when a venomous snake bite her on the left index finger.,1
"An employee was loading a rail car when he collapsed and fell. His fall was stopped by his personal fall arrest system (PFAS), but as he was already unconscious he struck his head on a beam or the rail car after his hard hat fell off. The employee was hospitalized for treatment of a seizure, lacerations, and head injuries.",1
"An employee was using a milling machine to make a metal part when a shaving from the part caught his glove and pulled his hand into the machine, amputating his right ring finger. The machine was unguarded at the time.",0
An employee fell approximately 6 feet to the ground while disassembling a crane. He landed on and broke his back.,1
"An employee was standing next to equipment that was being moved when a piece of the equipment fell off and hit his face, fracturing his jaw.",1
An employee was pouring a ladle of molten iron into a sand mold. Radiant heat from the pour caused the employee's jeans to catch fire. The employee was hospitalized with third degree burns on his right leg.,1
"On 7/15/2017, an employee received an electrical shock at a junction box for a pole-mounted light fixture, requiring hospitalization.",1
"An employee was helping to move a 24"" by 14"" transformer on a boat with a hoist. When he went to set the transformer down, the transformer slipped and landed on the table surface, trapping his index finger between the two. His fingertip was amputated.",0
"An employee opened an electrical switching cubicle with 7,200-volt electrical lines to repair a dead line. He lost his footing and fell forward into the electrical switching cubicle, making contact with the energized electrical lines. He received electrical burns to his left arm and left knee, requiring hospitalization.",1
"An employee fell approximately 25 feet from a roof, suffering a broken back.",1
"An employee was working from a raised bucket truck to troubleshoot a center phase when his right back shoulder contacted an energized electrical switch. He suffered burns to the right arm and upper back shoulder area, requiring hospitalization.",1
"An employee was removing jammed material from a machine when his right middle and ring fingertips were caught and amputated in the machine, which was unguarded at the time.",1
"An employee was operating a press brake to bend a piece of steel. After bending the piece of steel, he re-actuated the press brake with the foot pedal while grabbing the part out of the die. The part broke up toward the front/top of the press (ram) and a previously bent flange caught and amputated his left index and ring fingertips above the knuckle.",0
"While polishing a throttle valve stem in front of a CNC lathe, an employee was caught in the machine, suffering left arm fractures, a pinky finger amputation, and damage to other left-hand fingers.",1
An employee was adjusting a swing arm that did not connect with a jack when his left index fingertip was pinched and amputated between the swing arm and jack.,0
"An employee lost his balance while removing a safety latch on top of a truck and fell approximately 12 feet to the ground below, suffering a concussion and possible fractured vertebrae.",1
"An employee was placing 135-pound panels on the rack of an automated storage system when a panel fell and hit his left leg, breaking it above the ankle. He was hospitalized.",1
"An employee was on a catwalk handing a bail of insulation down to a customer when the top rail of the catwalk slipped out of its designated bracket. The employee fell 8.5 feet to the concrete floor, suffering pelvic and shoulder pain that required hospitalization.",1
An employee was attempting to unjam stackable potato boxes on a box palletizer when the machine began operating and crushed the employee's skull. The palletizer was not locked out at the time.,1
An employee was directing as 4-foot section I-beams were being loaded onto a flatbed truck when a beam fell from the truck and struck his right arm before landing on and breaking his right foot.,1
"An employee was lifting equipment when it moved and fell on the employee's hand, causing a partial amputation.",1
An employee was pressure washing concrete and contacted his left knee with the high pressure water stream (3500 psi) resulting in a laceration to the kneecap and air behind the knee.,1
An employee tripped on the leg of a stand and fractured the left hip.,1
An employee was performing physical training when he became exhausted and ill. He was hospitalized.,1
"An employee tripped over a forklift tire and fell backwards into another forklift tire, hitting his back.",1
"A door closed on an employee's little finger, amputating the terminal end.",0
An employee was operating a punch press when the press crushed his left middle fingertip. The press was unguarded at the time.,0
An employee who had worked his normal 12 hour shift went home and was later hospitalized for dehydration.,1
"An employee was cleaning the roller on a printing press when the employee's right thumb was pulled into the in-going nip point, partially amputating the thumb tip. The press was unguarded at the time.",0
"On Monday, July 17, 2017, at approximately 9:30 AM, employees were attempting to hook a trailer to a truck in the parking lot of the facility. During the hooking process, the trailer moved, catching and amputated an employee's left index fingertip between the ball of the hitch and the trailer.",0
"On July 17, 2017, at approximately 9:30 a.m., an employee fell while climbing down from a truck trailer. She suffered a compound fracture to the right ankle and was hospitalized.",1
"An employee slipped and fell while filling compost bins with compost. As he was falling, he tried to catch himself by grabbing a chain. His right hand went into a cog and his index fingertip was amputated.",1
"An employee was holding metal I-beams on a floating barge when one of the beams fell and struck the employee's right fingers, injuring them.",1
"On 7/17/17, an employee was driving a stand-up riding forklift truck and negotiating a turn when the forklift struck a column. His left leg was crushed in the collision, suffering multiple fractures. He was hospitalized and had surgery.",1
An employee climbed a ladder to access a tree. He fell approximately 10 feet to the ground as he was transferring from the ladder to the tree when his climbing line failed. The employee suffered a broken hip.,1
The employee was moving equipment around on a truck in preparation for fit testing. The employee started having chest pains from possible heat exposure and was hospitalized.,1
An employee was adjusting a chair back part in a CNC bender when the machine crushed his right index finger. His finger had to be medically amputated at the first knuckle. The bender machine was operating at the time of the incident.,1
"An employee was delivering goods and using a pallet jack to move them inside the trailer when he slipped over the edge of the trailer and fell about 4 feet to the concrete ground. His left lower leg broke, requiring hospitalization and surgery.",1
"An employee was lifting the cab off a skid steer. As the cab was being lifted and tilted back, the cab door swung down and pinched the employee's right ring finger resulting in a partial amputation.",0
"An employee was moving a 300-pound stone when the stone flipped and fell on the employee's right foot, lacerating it and fracturing the big toe.",1
"An employee was conducting a field safety observation. While he was observing a coworker, he started sweating heavily. He was hospitalized for severe dehydration.",1
An employee was mowing and started feeling chest pain. The employee suffered a heart attack.,1
"An employee was preparing to throw debris from a roof into a dumpster when he lost his footing and fell approximately 15 feet to the concrete below, injuring his back, ankle, and wrist. His safety harness was unhooked at the time of the incident.",1
An employee was cleaning the edge banding machine and amputated the right middle and ring fingertips on the blades. The machine was running at the time of the incident.,0
An employee was walking when a plywood board fell from the 18th floor and hit his hard hat. He suffered a head injury.,1
An employee was adjusting the board width on the roller conveyor that feeds stock through the painting machine and sustained partial amputations of the left middle and ring fingers in the roller chain and sprocket.,0
An employee was using an air gun to remove tire bolts from a truck when the truck vibrated off its jack. His right ring finger was then caught and amputated between the air gun and the bolt.,1
An employee was helping a coworker stack hydraulic shoring into the bed of a service truck when the shoring shifted and smashed/amputated the employee's ring fingertip.,0
"An employee was preparing to clean a room. She had her hand on the doorframe when the door closed on her hand, injuring her left middle finger and requiring surgery.",1
An employee used tongs to pull a pipe apart and was trying to remove them from the pipe when the tongs struck and broke his ribs.,1
"An employee was operating and moving a powered pallet jack when the employee's right ankle was caught between the pallet jack and a guardrail. The employee suffered a fractured right ankle, requiring surgery and hospitalization.",1
The employee was preparing to clean the stale roller. The employee was manually moving a belt and pulley when his fingers became pinched between them resulting in lacerations and amputation of the right pinky finger.,0
An employee was changing a tire on an 18-wheeler when his left pinky finger was caught between the tire and the fender amputating the tip.,1
An employee was on a ladder and grabbing onto a metal pipe when he suffered an electric shock. He then fell approximately 27 feet from the ladder.,1
An employee suffered from dehydration and heat illness while on a trash collection route. The employee was hospitalized overnight.,1
"An employee was looking for an air conditioner leak inside a ceiling when the roof collapsed and he fell 7 feet, injuring his spine.",1
"An employee fell as he was stepping off a ladder, fracturing his hip and requiring hospitalization.",1
"An employee was removing wooden cleats from a top conveyor belt and tossing them onto a bottom belt when the employee's right thumb was caught between the bottom belt's chain and sprocket, amputating 3/4 of the right thumb tip.",0
"An employee was changing out a cutter head on a planer and was using a lifting device to hoist the 100-pound blades from the machine. The lifting device has an adjustable balance so the blades can be tilted as they are removed from the machine. As the employee was removing the blades, his left hand was on the hoist between the collar and the end plate. The collar slid back toward the end plate, pinching and crushing his index finger between the collar and end plate. His index fingertip had to be surgically amputated.",0
"An employee was pulling IV bags from a gray bin. While he was trying to shut the lid, he found that there was air in the bag. As he was attempting to release the air from the bag, he received a puncture wound to the left forearm.",1
"An employee was wiping debris from the bottom of a bundle of lumber when the bundle shifted and pinched the employee's left middle finger, amputating the distal tip.",0
An employee was using a computerized panel saw. The guard came up and there was a piece of scrap underneath. The employee reached for the scrap and the guard came down on his fingers resulting in lacerations to the pads of the right middle and ring fingers. One of the fingertips was amputated.,0
An employee was helping to change out a roller on a stacker when his right foot was smashed between two pieces of metal. The steel safety toe in his work boot then bent and amputated the tip of his right big toe.,1
"On 7/18/2017, an employee had been operating a forklift when he dismounted the forklift to pick-up material. A forklift operator then backed into him, pinning him between the two forklifts. He injured his lower back and hip on the right side of his body and suffered a small pelvic fracture.",1
"An employee was walking as a nearby truck attempted to pull another truck using a hook and a synthetic sling. The hook on the sling broke and impaled the employee's stomach, requiring hospitalization.",1
"An employee experienced chest pains throughout the day while making deliveries to customers. The employee was lifting stock, unloading stock, and setting up ramps at customer locations. The employee was hospitalized with chest pain and heart arrhythmia.",1
"While operating a transit bus, an employee was assaulted by a passenger with a knife, suffering a cut to the left side of the face.",1
An employee became ill while on his route and was hospitalized with a possible heat-related injury.,1
An employee had been tying rebar outdoors in direct sunlight for approximately 12 hours when he suffered from heat stress and was hospitalized.,1
An employee was riding a horse in a cattle pen when the horse bucked. He was thrown off the horse and hit the back of his head. He was hospitalized.,1
"An employee was preparing a valve assembly for transport when the assembly became unstable and tipped, striking the employee's hip/thigh region.",1
An employee was installing a guardrail along the interstate and suffered heat stroke. The employee became light headed and fell over with cramps and nausea.,1
An employee was operating a 150-ton mechanical power press when his left hand entered the point of operation and was amputated.,1
"An employee suffered an allergic reaction to the avocado in a coworker's guacamole, requiring hospitalization.",1
"An employee was helping a coworker lower a cutting trough. The coworker attached a chain to the cutting trough and a shaker walkway overhang. The employee centered a forklift on the cutting trough and raised the forks up until they came into contact with the trough, to relieve any pressure from the saddle supports underneath. He un-pinned and removed one saddle support, then attempted to un-pin/remove the second support. He took his left hand and held the tubing and the slide portion of the saddle support in order to gain additional leverage to free the stuck pin. Once the pin came out, the slide fell and smashed his left index finger between the saddle and the tubing.",1
An employee was skinning a wire to test for voltage on a light pole when he suffered an electric shock from the energized line.,1
"An employee was walking behind a track hoe when it struck the employee's right foot, breaking the third, fourth, and fifth toes and the metatarsals.",1
"An employee was driving a forklift to transport a dumpster full of wood scrap to a scrap pile. When he hit the trip lever to tip the dumpster forward, the bar came up and pinched his left-hand fingers between it and a forklift fork. His left middle and ring fingers were crushed and lacerated, and his ring finger had to be surgically amputated to the first knuckle.",0
"An employee was trying to guide an outrigger beam into an outrigger box. As the beam slid into the box, the hydraulic cylinder inside the beam smashed the employee's thumb against the inside of the box. The employee required surgery.",1
"On 07/18/2017, an employee was working on a firewall when he began experiencing symptoms of heat stress, including nausea and vomiting. He was hospitalized for heat exhaustion.",1
An employee suddenly vomited and passed out while laying brick from a third-story exterior deck. The employee was hospitalized.,1
"A temporary employee was ripping a board on a table saw when it kicked back. His left hand then contacted the blade, partially amputating his fingers.",1
"An employee was on top of a structure retrieving a 2x4 piece of wood when he fell through a hatch opening to the ground 20 feet below. He suffered a punctured lung, broken rib, and cracked vertebrae.",1
"An employee's lawn mower was stuck in mud. As a vehicle was pulling him out with a chain, the chain broke and struck his arm. He was hospitalized and had surgery.",1
"An employee was moving a traffic cone when a truck ran over his foot, fracturing it and requiring surgery.",1
"An employee was trying to lower a tower on a light plant when the cable came out of the pulley and created slack. As the employee tried to put the cable back in the pulley, the cable snagged the employee's glove and pulled it into the pulley, amputating the first digit of the employee's right pinky finger.",0
An employee was hauling a 5-gallon bucket of water up a 20-foot incline to dump it when he experienced symptoms of dehydration. He was hospitalized for dehydration and heat stress.,1
"An employee was working from the second floor of a mushroom house when he fell approximately 7 feet through an open walking/working platform and landed on the first level, injuring his head and neck. He was hospitalized.",1
"An employee was drilling holes in a ceiling to add a conduit when the employee fell approximately 10 feet, suffering multiple head, back, and chest injuries.",1
"An employee was using a hydraulic machine to test the torque on some nacelle bolts. The employee was placing the hydraulic head on the bolts when a coworker activated the machine. The employee's right middle finger was caught between the machine and the bolt, amputating the first digit.",0
"While working on an elevated pallet racking system, an employee slipped and fell approximately 10 feet to the ground, injuring the head, back, and chest. The employee was hospitalized.",1
An employee was adjusting the blades on a forklift and crushed a finger in a pinch point.,1
An employee received steam burns to the lower extremities while repairing a sewer grate.,1
An employee was unloading a server rack from a truck when the rack fell over onto the employee's lower left leg. The employee was hospitalized.,1
"On July 19, 2017, at 1:00 PM, an employee was standing next to a skid steer loader when the tracks ran over the employee's left leg and fractured it. The employee was hospitalized.",1
An employee was assembling wooden cabinets and experienced dehydration related to heat exhaustion.,1
"While tripping in the hole, an employee stepped on a rotary table to grab a stand of drill pipe. His left leg went out from underneath him and he fell, fracturing his right tibia and fibula.",1
"An employee was using a saw to cut concrete when the saw bound and bounced back, hitting and lacerating his right cheek. He was hospitalized.",1
"An employee was removing an injection unit platform off a press bed when the unit slipped off. His index finger was pinched between the unit and the platform, resulting in a partial fingertip amputation.",0
"An employee was operating a plug press machine when his left thumb was caught in the machine, severing it to the knuckle.",1
An employee was on the roof and became faint or dizzy. He stumbled across the roof and fell. His life line caught him and he did not hit the ground. The employee suffered a heat-related injury.,1
An employee was moving pipes on an oil rig and became sick to his stomach and vomited. The employee suffered a heat-related illness.,1
"On July 19, 2017, at approximately 2:00 p.m., an employee experienced dizziness, cramping, and nausea, during the delivery of mail on his route. The employee was hospitalized for acute kidney failure and heat exhaustion. The heat index at the time of the incident was 90 degrees.",1
"An employee was descending a fixed ladder from the mezzanine (approximately 6.5 feet) to the ground level when she lost her footing and her grip. She attempted to jump from the ladder to avoid falling and landed hard on her feet, fracturing both heels. She then hit her head on the floor, injuring her head. She was hospitalized.",1
An employee was cutting a piece of glass when the glass fell and lacerated his wrist.,1
"An employee was operating a walkie forklift to load a trailer when the walkie became caught on the edge of the dock next to the dock plate. The walkie stopped abruptly, sending the employee onto the dock floor. The employee suffered head and hip injuries.",1
"An employee was cleaning a maintenance closet when he tripped over an extension cord and fell to the ground, breaking his hip.",1
"On 7/19/17, an employee was dismantling a scaffold and removed a brace when the scaffold's end frame fell on his back and pushed him over. He suffered a back injury and was hospitalized.",1
"An employee was working on the roof of a second story structure, approximately 17 feet from the ground, when he fell off and broke both ankles.",1
An employee was lifting a laundry bag when she felt severe back pain and was hospitalized.,1
"On 7/19/17, an employee was cleaning near a zinc sulfate bagging operation when the employee tripped. The employee's right hand then entered the rotary air valve and contacted rotating parts, amputating the index fingertip.",0
An employee was cutting vegetables with a chef knife when the blade amputated 1/4-inch of one of his right fingertips (no bone loss).,0
An employee was helping a coworker install a 600-pound flange/pup onto another pipe. The coworker was using a homemade flange hook to hold the flange/pup when the flange/pup fell onto the employee's foot. The employee was hospitalized with broken toes.,1
"An employee had been painting outside in high temperatures when he felt ill, experiencing nausea and vomiting. He was hospitalized overnight for dehydration and heat stress.",1
"An employee tripped over a cord and fell, injuring her right knee (contusion).",1
"An employee fell off a delivery truck lift gate as it was being lowered to the ground, suffering a forehead laceration.",1
"An employee was getting ready to pick up tomato paste when his fork truck began to slide. He attempted to stop the truck with his left foot, and his foot was caught between the beam and fork truck. His foot became swollen and suffered a possible fracture.",1
"On July 19, 2017, an employee had loaded a truck and was driving a delivery route when he was overcome by heat and passed out. He was hospitalized overnight for heat exhaustion.",1
"An employee was attempting to adjust a conveyor belt when his arm was pulled into the rollers. His forearm broke, requiring overnight hospitalization. The rollers were unguarded at the time of the incident.",1
An employee fell from the first level of scaffolding.,1
"An employee and a coworker were assembling a manure agitator frame. They were using a rough-terrain forklift and nylon sling to support the weight of the right-side stabilizer wheel bracket while manually aligning and pinning alignment holes between the wheel bracket and mounting flanges on the frame. While walking around the stabilizer wheel bracket, the coworker bumped into the edge of the stabilizer wheel bracket. At that time, the bracket position shifted while the employee was using one of his left-hand fingers to feel the mounting hole alignment between the mounting flange and stabilizer wheel bracket. His fingertip was pinched in the shear point between the wheel bracket and mounting flange, resulting in surgical amputation at the first knuckle.",0
"An employee was cleaning debris from a bin when a forklift operator came into the employee's workspace and struck the bin she was cleaning. The employee was struck by the bin and lost her balance, falling to the ground and fracturing her femur at the hip.",1
An employee was trimming a palm tree from a boom lift when he fell approximately 25 feet. He suffered fractures and was hospitalized.,1
An employee was installing satellite TV at a residence when he suffered heat exhaustion. He was hospitalized hospital for treatment.,1
An employee was using a small air-driven chisel to remove hardened asphalt from the conveyor slats of a hot mix asphalt transfer device when a piece of asphalt flew into his right eye.,1
"An employee was cleaning acid out of a vessel, tripped, and sustained acid burns to the neck and arm.",1
"On July 19, 2017, at 9:29 AM, an employee was processing a donation and fell from the trailer to the concrete ground. The employee suffered a fractured clavicle, scapula, ribs and a head laceration.",1
An employee was punching holes in metal plates using an ironworker machine when a piece of metal came out of the machine and struck the employee in the neck.,1
An employee was unloading rotors from his pickup truck when a two-wheel dolly fell on his right pinky finger and smashed it against the truck bed. His right pinky finger was amputated.,0
"An employee was cutting wooden strips on a table saw. While using a push stick, the employee slipped on saw dust around the table saw. The employee's left hand then contacted the rotating blade, amputating the fourth finger's distal phalanx.",0
"On July 19, 2017, around 11:00 a.m., an employee was working at ground level framing walls for a new building when he began feeling hot and sick. He was hospitalized for heat-related illness.",1
An employee became overheated and was hospitalized with a heat injury.,1
An employee was abrasive blasting structural steel on a bridge rehabilitation project when he stopped to inspect his work. The nozzle was still on and the abrasive blasting material struck his left leg.,1
"An employee was standing on an 8-foot ladder looking into a wall to receive a fish stick (an electrical tool) when the fish stick became jammed. When the fish stick became free, it went up under the employee's safety glasses and poked his left eye, requiring hospitalization.",1
"An employee was loading a tote of product using an electric jack when the jack handle jerked to the right, pinching and partially amputating the employee's right pinky finger between the handle and the plastic tote.",1
An employee was hanging pipe and was feeling overheated with a head ache and chest pains.,1
A temporary employee was working on baseboard in a hotel room when he passed out. Heat stress is suspected to be the cause or a contributing factor to the employee's collapse.,1
"On July 19, 2017, an employee was walking behind a forklift when it swung around and struck the employee, resulting in hospitalization for a fracture to the pelvic area.",1
An employee suffered heat cramps while welding inside a kiln and was hospitalized for heat stress.,1
An employee was working on a machine and had a part of her right index finger amputated when it got caught in a cylinder of the machine.,0
An employee was hospitalized for a left leg injury after she was attacked by a dog while delivering mail.,1
An agent was working out in the gym and had a mild heart attack.,1
"On July 20, 2017, an employee tripped and fell, fracturing her left arm and requiring hospitalization.",1
An employee was trying to start a conveyor when his right pinky fingertip was caught and amputated between the belt and pulley. The belt was unguarded at the time.,0
"An employee was carrying roofing materials on a roof when he fell 20 feet over the edge. He broke his arms and some facial bones, requiring hospitalization.",1
An employee was using a grinder with a sanding disc when the disc came off and cut his left leg above the knee. He was hospitalized.,1
"An employee was driving a forklift on a freezer block when he lost control and slid into a coworker's power jack. His left foot was pinned and crushed between the forklift and the jack, requiring hospitalization.",1
An employee tripped over the corner of a mat on the floor. She fell and broke her hip.,1
"An employee was attempting to retrieve a cleaning rag from a fryer when her right arm suffered second degree burns, requiring hospitalization.",1
"An employee was installing PVC pipe from a 6-foot A-frame ladder when the employee fell, suffering a possible left arm fracture and requiring hospitalization.",1
"An employee tripped over a chair mat and broke the right ankle, requiring surgery.",1
"An employee was standing near a roadway when a passing tractor trailer struck an overhead line, causing a temporary traffic light to fall and strike the employee. The employee suffered a fractured pelvis/hip.",1
"An employee was performing maintenance on a machine when a coworker activated it. His hand was pulled into the gears by the belt and pulley, amputating his right index and middle fingers. The machine was not locked/tagged out at the time.",0
An employee was changing the swabbing cup on a workover rig when a pipe slipped down approximately 12 inches and amputated the employee's index and middle fingers at the middle joint.,1
An employee was trying to unjam an ironing/folding machine when her hand became caught and severely lacerated in the machine.,1
"An employee was cleaning a cover plate when the employee's right index finger went through a hole in the cover and contacted a cutter knife, amputating the fingertip.",0
"An employee was walking into the store on the sidewalk from the parking lot, tripped and fell resulting in a fractured left arm, a dislocated left shoulder and facial laceration.",1
"An employee was climbing a ladder to cap a live wire when he bumped the wire and received an electric shock. He then fell from the ladder to the ground, breaking his leg and requiring hospitalization.",1
"An employee was using a walk-behind loader to remove fluff in the working area under the mini mill. While cleaning with the equipment, he wanted to clean the other side of the crossbeam further. When he got closer to the crossbeam, the loader hit a bump and raised upward. His right hand was then pinched between the loader handle and the crossbeam, fracturing his second metacarpal bone.",1
"An employee was operating a forklift to transfer a pallet of product through the warehouse and drove over a wet area that had just been mopped. The forklift lost traction and slid into a rack. The employee's right hand was caught in the metal grate of the rack, fracturing her middle, ring, and pinky fingers and lacerating her hand.",1
"On July 20, 2017, an employee was using a handheld drill to drill a hole in a window frame when the drill bit slipped across the frame and caught the employee's glove. The employee's glove and left thumb became twisted around the drill bit, causing a laceration and fracture to the left thumb between the nailbed and first knuckle.",1
An employee was working his trash route and compacting garbage with his truck when a container with liquid popped and sprayed his face. He ingested the liquid and required hospitalization.,1
"An employee fell to the ground while climbing a ladder, fracturing a knee.",1
"An employee was unloading items from a forklift when his right hand was caught in the lifting mechanism, amputating the first digit of his index finger.",0
"An employee was disassembling a ski lift drive terminal and went onto the terminal's catwalk to remove the nuts. When he removed the nuts, the plates swiveled and collapsed underneath him. He fell 12 feet, 9 inches, suffering broken ribs and a collapsed lung.",1
"An employee missed a step while descending a ladder. She fell and broke her hip, requiring hospitalization and surgery.",1
"On Thursday, July 20, 2017, at approximately 8:30 p.m., an employee was connecting a lavatory service cart to a baggage tug when his right middle fingertip was pinched and amputated by the baggage tug.",1
"An employee slipped and fell, striking her face and nose on the floor.",1
An employee was using a sanding disc to de-burr a piece of steel when the sanding disc partially amputated the employee's left thumb tip.,0
"A temporary employee was walking down some steps when a 2,200-pound sack of product fell on the employee. The employee suffered a fractured femur and back injury.",1
"An employee was scraping paste from a chute into a hopper when his scraping tool fell into the hopper. As he was attempting to retrieve his tool, the mechanical stirring paddle inside the hopper contacted his hand, injuring his finger.",1
"An employee was walking down the stairs. When the employee reached the last step to the floor, the employee's right ankle gave out. The employee fell, spraining the right ankle and fracturing the left ankle in three places. The employee was hospitalized and had surgery.",1
An employee was entering an operating room when the swinging doors caught and amputated the employee's pinky fingertip.,0
An employee was bitten by a hog. The bite became infected and required hospitalization.,1
"An employee was pulled through a 10-inch opening into a machine, suffering a broken right arm and burns to the face, neck, hip, and right arm. The machine was in operation at the time.",1
An employee was driving a forklift when his hand became caught between the forklift and a column. He required surgery.,1
"An employee was sitting in the operator seat of a log loader truck preparing to assist in a tree felling operation when a tree limb broke and fell on him, knocking him to the ground. He fractured four vertebrae, requiring hospitalization and surgery.",1
An employee was closing the roll-down door on the delivery truck and pinched his fingers in the track resulting in bilateral avulsions of the fourth and fifth fingers.,1
An employee was lifting a trailer with an overhead crane hoist when the trailer slipped and smashed his right index finger.,1
"An employee was descending a rail tank car ladder while carrying a sample dip apparatus when he slipped and fell to the gravel roadway, landing on his back. He broke his L1 vertebra.",1
"On July 20, 2017, at 11:15 p.m., an employee was trying to turn a railcar flipper. He had placed one foot on the top of a jersey wall and one foot on the railcar to position himself to move a metal bar that would move the flipper when he slipped and broke his right ankle, requiring hospitalization.",1
"On July 20, 2017, an employee experienced stomach and side pains after driving a delivery truck. He was hospitalized for possible dehydration.",1
An employee experienced seizures at night after fighting a fire during the day. The employee suffered a sodium imbalance due to heat exposure.,1
An employee was using a horizontal band saw to cut metal when the saw blade partially amputated his right thumb.,0
An employee was taking photos outside when he became overheated and dehydrated. He was hospitalized for overexertion and heat exhaustion.,1
"An employee had loaded a 336-pound steel plate onto a burning table using a plate clamp. As he was removing the clamp using a grab hook, the hook slipped and the steel plate fell on and crushed his hand.",1
"On July 20, 2017, an employee began having cramps while working. The employee went home after work and became nauseous and began vomiting. The employee was admitted to the hospital for heat exhaustion.",1
An employee delivered packages all day and was hospitalized that evening for cramps and dehydration.,1
"On July 21, 2017, an employee was attempting to remove a piece of wood from a trim saw when the blade amputated the employee's left middle finger. The trim saw was running at the time.",0
"An employee was removing pins from a crane grapple arm when he was caught in the pinch point of the crane grapple tine and a support member, fracturing his ribs and vertebrae.",1
"An employee had raised a steel ring with a crane when it fell and struck his left foot, crushing it.",1
"An employee was cutting and cleaning a 112' x 30"" x 2"" steel plate when it fell on the bridge of his left foot, lacerating it and causing soft tissue damage and fractures.",1
An employee was servicing a trailer when the trailer rolled backwards. His hand was caught and partially amputated between the trailer and a truck. He was hospitalized.,1
"An employee was helping to pour concrete when the concrete poured inside his work boots, burning his skin on both legs.",1
"An employee was changing a belt on a return air ventilation fan when the employee's small left finger was caught in the in-running nip of the belt and pulley, amputating the fingertip.",0
An employee was raising a derrick on an oil platform when the derrick came in contact with a high-voltage power line. The employee suffered electrical burns.,1
"On Friday, July 21, 2017, at 4:45 p.m., an employee was overcome with heat exhaustion while detasseling corn. He was hospitalized.",1
An employee's right elbow was pierced by a metal chip. He was hospitalized when his elbow became swollen and infected.,1
An employee was moving forms when his left hand was caught between a shear wall form and an aluminum beam. His left pinky and ring fingers were lacerated.,1
"An employee was using a pneumatic nail gun to build a deck. The nail gun was attached to his tool belt. As he bent down, the safety on the nail gun pushed against his leg. The hammer then swung around and hit the trigger on the nail gun, causing it to fire a nail into his thigh.",1
"An employee was on top of a wall setting floor trusses when he lost his balance and fell outside the building. He fell 12 feet to a concrete patio and then rolled off the patio and fell another 10 feet to a dirt surface, breaking his left-side ribs and left leg.",1
"An employee was attempting to change a broken fan belt in an HVAC system when his finger was caught and lacerated between the belt and a motor puller, requiring surgery.",1
"An employee was repairing a tractor engine that was suspended in the air with three lifting straps to drain the oil out of the engine. While the employee was replacing a plug to the engine, one of the straps slipped and the engine shifted and struck the employee. The employee suffered a left ankle fracture.",1
"An employee was climbing a fiberglass extension ladder tied above to a stanchion post. While moving off of the ladder onto the roof, the employee's foot slipped on the roof deck and his hand slipped off of the ladder resulting in a fall. The employee suffered fractured ribs, vertebrae in the neck and a concussion.",1
"On July 21, 2017, an employee was working on a water leak from a clogged piping system. The piping system ran from the boiler to a manhole in the discharge area. The employee went into the manhole and put a plug in the piping system to help find the leak. The blockage was located and corrected. At around 12:30 PM, the employee went back into the manhole to remove the plug. When the employee removed the plug, hot water spewed onto the employee's right leg, buttock, and thigh, causing burns that required hospitalization.",1
"During disassembly of a spent perforating-gun tool string, an employee attempted to carry the setting tool (designed to set a plug in the well) section from the external stands into the trailer for breakdown. When he lifted the setting tool in the vertical position, he placed his right hand over and into the open end of the sleeve. At that point, the internal mandrel shifted further up to the open end. His right middle fingertip was pinched by the mandrel and the set-screw opening at the end of the sleeve, amputating the distal phalanx.",0
"An employee was climbing a ladder to complete a service call. A bolt holding the cable to an adjacent utility pole fell out of the pole, causing slack in the cable. As a result, the ladder bounced and the employee fell approximately 15 feet to the ground. He suffered possible fractured vertebrae.",1
An employee was hospitalized due to a physical altercation with another employee.,1
"An employee was working on a dryer operation and was removing a piece of glass when the machine's lid began to close unexpectedly. He was attempting to get his arm out of the machine when his wrist struck the structure and his arm was pinched between the lid and the machine. He suffered a fractured right wrist and right bicep cut, requiring hospitalization.",1
An employee was operating an ATV. The ATV rolled over and the employee suffered a hand laceration.,1
"An employee was struck multiple times by a patient. The employee was hospitalized for headache, blurred vision, nausea and vomiting.",1
"On July 21, 2017, at approximately 8:30 a.m., an employee and a coworker were pulling a dump bed out of a tractor trailer dump truck when the employee's right middle finger was caught and lacerated between the dump bed and the truck's tailgate. She was hospitalized.",1
An employee stumbled and hit his back on a fryer. Hot grease then splashed up and burned his back.,1
"An employee was repairing an automobile engine when his right hand was caught in the fan belt pulley, amputating his right middle fingertip.",1
"An employee was delivering snacks to a site location. He climbed into his trailer and was removing a support bar when he fell head first to the ground, fracturing his skull, lacerating his head, and suffering a concussion.",1
An employee was connecting a 2-inch pipe in a ceiling using hand tools and a drop light when he received an electric shock.,1
An employee was using a table saw to cut wood when the blade broke four of his left-hand fingers.,1
An employee was adjusting the forks on a powered industrial truck when a fork slipped off the machine and crushed the employee's right foot. Four of the employee's toes had to be surgically amputated.,1
An employee was greasing a rooftop HVAC machine when his left pinky fingertip was caught and amputated between the machine's belt and pulley. The HVAC was running at the time of the incident.,0
An employee was moving boxes on the second floor when he fell 10 to 12 feet through the wood floor to the first floor. The employee was hospitalized for a head injury.,1
An employee amputated the left index finger while operating a punch press.,1
"On July 21, 2017, at around 10:30 a.m., an employee was working from a welded frame scaffold approximately 15 to 20 feet high when he fell to the ground and broke his right femur.",1
"An employee was helping coworkers install a new manure belt using a cable and pulley system. The cable stopped under tension and the employee went to adjust it. The tension released, and the employee's right ring and pinky fingers were caught between the cable, pulley, and housing. The employee's right ring finger was partially amputated and the pinky finger was broken.",0
"An employee was working on a sanding machine which had just been turned off, when the machine's belts amputated the employee's fingertip. The belts were rotating at the time of the incident.",1
An employee was using a concrete saw when it kicked back and lacerated his chin and chest. He also lost two teeth.,1
"An employee was trimming sheet metal on an ironworker machine. He was using his finger to support the sheet metal when it bent and pinned his left index finger, amputating his fingertip.",1
An employee was delivering packages when he became dizzy and started shaking. He was hospitalized for dehydration.,1
"An employee was connecting a fiber optic cable on a utility pole when his spike kicked out and he fell approximately 15 feet to the ground, breaking his leg and requiring hospitalization.",1
An employee was hospitalized after having seizures in a car before moving to the next worksite. The cause may be heat related.,1
"An employee had been supervising solar panel installation on July 21, 2017, until approximately 3:00 PM. On his way home, the employee started to feel nauseous, light headed, and exhausted. The employee was transported to a hospital and admitted due to heat stress.",1
"An employee was letting a car down on a rack when the rack became jammed. As he was trying to release the latch, a metal piece that had tension on it snapped back and amputated his left fingertip.",0
"An employee was delivering mail when a dog broke through a home's screen door and bit the employee's left little fingertip, amputating it.",0
"An employee was conducting ultra high-pressure water jet cutting when his knee buckled and he lost his balance. As he was attempting to regain his balance, the cutting wand moved over his left foot and punctured a hole through it. He was hospitalized.",1
An employee was disconnecting an airplane's communication cables when lightning struck the plane. He suffered severe burns to his hands and feet.,1
"An employee was repairing a digging chain when he fell backward, fracturing ribs and lacerating his head.",1
An employee was attempting to clear a jam on a press machine when his right index fingertip was caught and amputated between the machine's stacker assembly and the back of the ram.,1
"An employee exited his vehicle to check the load when the vehicle began to roll and ran over his foot, breaking it.",1
"An employee was moving a 1,000-pound speaker when it fell on the employee's right foot, amputating the big toe.",0
An employee was working on a panel task card on top of an aircraft engine when he became nauseous and dizzy. HE was hospitalized with dehydration and heat exhaustion.,1
"While unloading a truck, an employee became dizzy and fell twice due to possible heat illness.",1
"On 7/22/2017, at approximately 10:30 a.m., an employee tripped over a bench and fell on the floor, breaking her elbow. She was hospitalized and had surgery.",1
An employee was struck by a roller coaster bucket while checking an air valve on the ride. The employee suffered fractures.,1
"An employee was helping to replace a conveyor belt on a slitter machine that was suspended by a crane when the employee's foot slipped through two steel plates. The plates then sprung back and pinned the employee's left lower leg between the two, causing severe contusions.",1
"On July 22, 2017, an employee was hooking up a holiday detector to scan a pipe for any bare metal when he received an electrical shock on the hand and fell to the ground. He was hospitalized.",1
"An employee was exposed to amine chemicals while changing over an amine tank, requiring hospitalization.",1
"An employee was in an aerial bucket working on a 3-phase powerline outside of a residence. As the employee lowered the bucket, it came into contact with the powerline. The employee then suffered electrical burns to a shoulder and an arm.",1
An employee was placing a box on the bird's perch when the bird bit the employee's right hand multiple times resulting in multiple lacerations and hospitalization.,1
"An employee dropped his keys in a storm drain and moved the metal storm drain to retrieve them. He was placing the metal storm drain back on when his left index finger was caught and lacerated between the grate and frame, requiring partial amputation at the hospital.",1
An employee was injured while operating a stand-up lift truck located by the refrigeration unit.,1
"An employee was attempting to fix a board when he lost his footing and fell 16 feet to the ground below. The employee was hospitalized for a head laceration, two brain bleeds, a fractured shoulder blade, and fractured ribs.",1
"An employee had just finished unloading a truck. He was descending the truck on a ladder while pulling the trailer door of the truck down when he missed a step and fell. As he fell, he pulled the door down with him and it landed on his left ring finger, breaking it. He was hospitalized and had surgery.",1
"An employee was assisting in mobilizing a rig when his right thumb was smashed, fractured, and lacerated between two metal pieces weighing about 30 to 40 pounds each. He was hospitalized.",1
"An employee was taking apart an injection molding die when the cavity block rotated and pinched the employee's finger between the block and the metal table, amputating the fingertip.",0
An employee was moving a pallet jack when it ran over his left foot and fractured a toe.,1
An employee dropped a brake drum onto their right hand and was hospitalized for surgery.,1
An employee was walking around after operating equipment and inadvertently grabbed a rotating shaft that was protruding from a straightening machine resulting in arm and hand lacerations.,1
"An employee began to feel weak and experienced respiratory difficulty due to high humidity levels and mold inside the building, requiring hospitalization.",1
An employee was pushing a part into a grinder in the centerless grind area when the employee's left index finger came in contact with the grinding wheel. The finger had to be amputated to the first knuckle.,0
An employee was water blasting when the wand broke and he received lacerations.,1
"An employee was loading a spool of cable onto a trailer bed when he fell through the trailer decking, injuring his left leg and back.",1
"An employee was being trained on how to operate an electric pallet jack. When he stepped off the pallet jack, it continued moving and struck his left foot, lacerating it and breaking his ankle.",1
An employee was driving around a curve in the road when his truck left the roadway and rolled over. He suffered a fractured pelvis.,1
"An employee was installing an actuator on a tilt skillet. While he was attempting to connect the motor with a pin, the motor dropped. His right finger was caught between the motor and the ground, amputating it from the nailbed to the fingertip.",0
"An employee was on a loading dock looking for his cart. He had one foot on the dock plate and the other foot on a truck when the truck pulled away. He then fell, injuring his knee and requiring hospitalization and surgery.",1
An employee was cleaning a peanut butter churner when her finger wrapped around the auger and broke. She was hospitalized and had surgery.,1
"An employee was trying to tighten a control rod on a concrete power screed when it ran over his right leg, breaking his tibia and fibula.",1
"An employee was cleaning dough buildup in a jammed conveyor when his left forearm was pulled into a roller, breaking it. He was hospitalized for surgery.",1
"An employee's arm was on a saw table while two coworkers were at the main control when the equipment was activated. The employee's arm was caught between the roller and the saw gauge, suffering a fracture and laceration.",1
"An employee was operating a forklift when the mast of the lift came down and trapped his left hand, breaking it.",1
"An employee was walking on a wet scaffold board when he slid and fell off the scaffold, fracturing his shoulder, rupturing his spleen, bruising ribs, and breaking his right leg and knee.",1
An employee was removing and/or inserting a point stake from/into an active air press when the machine's ram smashed and amputated fingers from both of her hands.,1
"An employee was retracting molded parts from a hydraulic press when an end cap slipped down and pinched the employee's left middle finger between it and an extrusion, partially amputating it.",0
"While operating a bumper car ride, an employee slipped and fell onto the hard steel decking surface, breaking the right tibia and fibula.",1
An employee suffered a possible heat-related illness after working outside and driving waste trucks.,1
An employee was working on an air conditioning system when his left middle fingertip was caught and amputated between the blower wheel pulley and belt.,1
"An employee was moving a heavy post on a roller table. Her fingers were over the edge of the post she was moving when her left index fingertip made contact with a connection plate attached to another post. Her finger was smashed between the two objects, amputating her left index fingertip.",0
An employee was mowing a lawn on a slope using a push mower when it slipped and went over the employee's right foot. The mower blades went through the employee's steel-toed boot and cut the middle toe on the employee's right foot. The tip of the employee's middle toe was amputated at the hospital.,0
An employee was walking through the job site when a rattlesnake bit his left lower calf.,1
"An employee was operating an upright reach forklift along an aisle when he turned left and his left leg was caught between the forklift and a shelf, suffering a compound fracture. He was hospitalized.",1
"An employee climbed an electric distribution power pole with climbing hooks, a belt, and harnesses while carrying electric line repair tools. The employee came in direct contact with an energized electric distribution powerline conductor and was shocked, suffering burns to the right arm, chest, abdomen, both legs, and both feet.",1
An employee was cutting metal parts with a punch press when his right hand entered the point of operation and was amputated.,1
"An employee was unstrapping a load on his trailer when the materials fell on him, breaking his ribs.",1
An employee was changing a tire on a package car when the tire slipped and pinched his right middle fingertip off between the tire and the brake disk.,0
"An employee was washing a concrete pump when the hose was sucked into the pump. When the employee attempted to grab the hose, the employee's hand was sucked into the pump, amputating fingers.",1
"An employee was on the ground directing an excavator operator to pick up a steel rail track when the excavator bucked caused the steel track to turn around and strike the employee's left leg, breaking it.",1
"While moving traffic cones, an employee was struck by a road sweeping vehicle that was operating in reverse. The employee suffered a fractured left pelvis.",1
"An employee was struck on the head by a hoist hook that came loose, suffering a concussion.",1
An employee was unloading a trailer with a powered industrial truck. His hand was outside the metal cage when he struck some material. His finger was caught and amputated between the metal frame of the truck and the material.,0
An employee was performing a change-over with concrete piping and was trying to move the long section of the header closer to the corner piece when the long section tipped on its side and pinched his fingers between the header and the concrete floor. His middle and ring fingertips were amputated.,1
"An employee was working on the fourth rung of an 8-foot ladder when one leg of the ladder moved and he reacted to the movement. The ladder fell with the employee, hitting the floor. He suffered a left rib fracture and partially collapsed left lung, requiring hospitalization.",1
"An employee was holding a door jam while his partner was drilling a metal plate into the bottom of the jam when the door became dislodged and slammed on his two middle fingers, amputating them.",0
An employee was descending the stairs at a customer's home when he rolled his ankle and fell to the ground.  He was hospitalized with a broken ankle and had surgery.,1
"An employee was driving a front-load/bucket tractor on an unpaved roadway. While surveying conditions, the employee stopped the tractor and positioned the front load bucket to approximately 18 inches above the ground to take pictures/video of a water-filled ravine that crossed the main roadway. The employee was then driving forward when the front wheels rolled down a slight sloped wash. The bucket embedded in the dirt, causing the tractor to stop. The employee's abdomen was injured from the abrupt stop and the pressure from the seatbelt he was wearing.",1
"On July 24, 2017, at around 11:00 a.m., an employee was preparing to load peracetic acid and peroxide into a plastic tote. He turned the air off, which keeps the plunger from opening up at the bottom of the fill tube, and guided the fill tube into a plastic tote. When he started lowering the fill tube into the tote, the plunger opened up and some chemical came out and splashed him, causing chemical burns to the left side of his neck and left shoulder.",1
"An employee was pinned between two forklifts, suffering broken ribs.",1
"An employee was moving a dust collector when it tipped over and fell on the employee's left leg, breaking it.",1
"An employee was struck by a falling tree during tree felling operations, fracturing the skull, scapula, and pelvis.",1
"An employee was removing a core from a mold. A crane then lowered the core onto the employee's left hand, amputating the middle and ring fingers.",1
"On July 24, 2017, an employee suffered an allergic reaction to a chemical solution while being fit-tested for a respirator, requiring overnight hospitalization.",1
"An employee was cleaning tables in the staff dining room. The employee attempted to close the outside door with his left hand and caught his right hand between the door and door frame, resulting in amputation of the middle fingertip.",0
"An employee was washing out a hydrovac truck at a dump site. While holding the high pressure hose, he was pushed back but his feet were stuck in the mud so he fell back and lost control of the high pressure hose. High pressure water shot through his right forearm.",1
An employee slipped while trying to cross over roll off truck rails and fell breaking his leg.,1
An employee was stretching out a garden hose for a pressure washer on a roof when he backed up and fell over the parapet wall approximately 9 feet to the roof below and fractured four ribs. He was hospitalized.,1
"An employee was struck by a customer's car while walking down the customer's driveway, fracturing her right ankle.",1
"On July 25, 2017, an employee was walking around and inspecting a portable sub station when the employee fell and fractured the right hip, requiring hospitalization.",1
An employee was injured and sustained second degree burns on his left leg after hot water sprayed on him during cleaning.,1
"An employee experienced dehydration after laying ABS pipe at a construction site, requiring overnight hospitalization.",1
"An employee was repairing a tire on a chasse and when the tire separated from the rim and exploded in his face. He suffered a concussion and a laceration above the left eye, requiring hospitalization.",1
"On July 25, 2017, at 3:15 p.m., an employee was attempting to clear a jam from the main line bagger when the employee's right thumb was caught in the belt and pulley, amputating it at the first joint.",0
An employee was attempting to obtain ice from the ice machine in the break room when the machine jammed. He was attempting to break up the ice when the ice chopper blades amputated his left middle fingertip.,1
"An employee was cutting a piece of metal with a roller press when the employee's right hand contacted the press blade, amputating the pinky finger.",0
An employee started a chain saw and was walking toward a log he planned to cut when he tripped and the running chain saw came up and struck his right upper leg area above the knee. He suffered a serious laceration and was hospitalized.,1
"On July 25, 2017, an employee was operating a CNC machine when the employee suffered dizziness, fatigue, and a fear of blacking out due to dehydration.",1
"An employee was opening a manhole with a tool when the tool slipped and he fell, fracturing a vertebra in his back.",1
"An employee stepped on an old screw while installing roof fiber boards, puncturing his foot.",1
"An employee became ill while installing new poles, requiring overnight hospitalization for dehydration/heat exhaustion.",1
An employee was working on pipes under the sun when he experienced hand cramping and was hospitalized for dehydration.,1
An employee was bagging cement and sending the bags via conveyor to a robot. A rock fell onto the conveyor. The employee attempted to remove the rock and an arm was caught by the robot. Both bones in the employee's left forearm were fractured requiring surgery and hospitalization.,1
An employee was operating a tape machine when his right thumb tip became caught in the machine's moving chain and was amputated.,0
"An employee walked into a resident's apartment, tripped over something, and landed on her left hip, fracturing it.",1
An employee was lifting luggage repeatedly when he felt a sharp pain in his lower abdomen due to a hernia. He was hospitalized and had surgery.,1
"On July 25, 2017, at approximately 7:30 AM, an employee was walking through the grass before entering the facility when the employee stepped on an uneven surface and fractured the left ankle, requiring hospitalization and surgery.",1
"An employee was erecting steel when he was overcome with heat stress, requiring hospitalization.",1
"An employee fell off a ladder while repairing a ceiling, suffering head and kidney injuries.",1
"An employee climbed on a roof, fell through a rusted area, and landed on the concrete floor approximately 11 feet below, breaking 10 ribs and the tailbone.",1
An employee was changing out a pulley on an exhaust fan when his right middle finger was crushed between his pipe wrench and the fan's frame. His finger had to be surgically amputated.,0
An employee was finishing drywall and suffered a heart attack.,1
"On July 25, 2017, an employee was walking on a flat roof when the roof gave in and the employee fell approximately 13 feet to the floor below, suffering L1 and L2 vertebrae compression fractures.",1
"An employee was replacing bearings on the shaft doors of a hopper when his thumb became caught in a hole where the bolt was supposed to go, amputating the first digit.",0
An employee was attempting to retrieve a part from a machine. The employee climbed up on a chair with wheels to reach the part. The chair rolled out from underneath the employee causing the employee to fall to the ground. The employee suffered fractured rib(s) and an abrasion to the arm.,1
"An employee was performing regular job duties when a piece of steel approximately 20 inches in diameter and 3 feet long began rolling on the floor. The employee was attempting to stop the rolling piece of steel when it rolled over his left foot, breaking it and requiring hospitalization.",1
"An employee was straddling a beam approximately 19 feet above the ground when he lost his balance while preparing to connect a beam being hoisted into place by a crane. He fell to the ground, striking dirt and the first course of cement block around the building's foundation. He fractured his nose and arm and was hospitalized overnight.",1
"An employee was using a 10-ton overhead crane and had picked up a bundle of steel angles weighing 7,250 lbs. The employee and a coworker then raised the bundle around 4 feet high and started to cut the metal strapping off the bundle. The employees were on their third band when the crane was moved southward, pushing them over a stack of angles and pinning them against some pipe. The material struck the employee's chest, cracking ribs and puncturing a lung. The employee was hospitalized.",1
"An employee was heating up an area on a cast work roll with a torch. Grease was sealed in a compartment on the work roll. When the compartment was heated, the employee was splashed with heated grease, suffering second degree burns on his neck, chest, and forearms.",1
An employee collided with a parked car while driving around the corner of a building.,1
An employee suffered a right middle finger amputation while working with a chain.,0
An employee was repairing a broken link on a flat breader machine's conveyor belt when a coworker activated the machine. The machine then fractured two of the employee's left-hand fingers.,1
An employee was performing preventative maintenance when an arc flash occurred. The employee was hospitalized with burns and other arc-flash-related injuries.,1
"An employee was checking the load on his forklift to investigate a sound he heard when the two-pallet-high load shifted and the product fell, hitting and fracturing his right lower leg.",1
"An employee was exposed to carbon monoxide while washing trays, requiring hospitalization.",1
"An employee was climbing the ladder on the back of his tractor trailer when his fingers became entangled in the ladder and he lost his balance. He fell 5 to 6 feet to the ground and sustained fractured ribs, a left pointer finger laceration, and bleeding in the brain.",1
"An employee was installing a computer cable in the ceiling while working from a ladder. While he was putting the ceiling tile back in place, he slipped and fell to the floor, breaking ribs and his back.",1
"An employee was milking a cow when it kicked the employee's face, causing head trauma.",1
"An employee was removing a 1' X 4' board from a stopped drive belt while standing on a 3-foot fixed ladder when he lost his balance. As he was trying to grab the rail, his left wrist struck the metal guardrail and was fractured, requiring hospitalization.",1
"Two employees were changing the grinding hammers on a tub grinder that is used to grind mulch. As one employee was using a sledgehammer to pound one of the grinding hammers, a piece of the sledgehammer chipped off and struck the second employee in the arm, cutting an artery and requiring surgery.",1
An employee was repairing equipment at the job site and became overheated.,1
Employees were rounding up bulls when a horse bucked an employee off and then rolled over the employee. The employee was hospitalized with broken ribs and a collapsed lung.,1
"An employee was walking down stairs, missed the last step and fell causing her to sustain a right ankle fracture which required surgery.",1
An employee was cutting a sample belt from a cure press to check for length when his left hand was pulled between the stretcher ring and the torque team belts on the press resulting in fractures to his left ring and pinky fingers and burns to his left hand and forearm.,1
"An employee was using a table saw to make a part for a door. He was cleaning some of the wood dust and scraps from the side of the blade when his left thumb was pulled into the saw blade, amputating his thumb tip below the nailbed but above the knuckle. The saw was unguarded at the time.",0
"On July 26, 2017, an employee was using a pry bar to lift a manhole cover when the pry bar slipped and the cover landed on his left hand, amputating the ring finger.",0
An employee was moving carts to be loaded onto a truck when his left middle fingertip was crushed and amputated between two cart handles.,0
An employee was stacking finished 12 packs on a pallet. He complained of being dizzy and went to the hospital where he was admitted with carbon monoxide (CO) poisoning.,1
"After installing a mixer on top of a water tower and inspecting the tower in direct sunlight, an employee experienced cramping and could not move. The employee was hospitalized for heat exhaustion.",1
"After finishing his courier route, an employee began to experience cramps and later passed out due to dehydration, requiring hospitalization.",1
"An employee was exiting her mail delivery vehicle when her feet became tangled underneath the vehicle and she fell, fracturing both ankles.",1
An employee became unconscious and was hospitalized for possible heat stroke.,1
"An employee was lifting a piece of metal and it fell, amputating the tip of the left thumb.",0
An employee experienced heat-related illness and was hospitalized after working outside changing crossties on a railroad track.,1
Two employees were engaged in horseplay on the tongue trimming line resulting in injury to one of the employees. The injured employee sustained a right forearm laceration from a knife.,1
An employee was stepping from a company van when the van slipped into gear and moved. The employee was knocked to the ground and suffered a broken left femur.,1
An employee was using a grinder to cut a threaded rod when the grinder cut his arm.,1
"While performing routine maintenance on an HVAC unit, an employee's shirt was caught in the pulley. The employee reached to pull their shirt free and sustained a right pinky fingertip amputation.",0
"An employee slipped and fell on the kitchen floor, suffering a broken femur.",1
"While moving pipes with an overhead crane, an employee became weak, dizzy, and lightheaded from heat exposure, requiring hospitalization.",1
"An employee was shutting down a restaurant's alarm when his left pointer finger was caught between the door jamb and the door, amputating his left pointer fingertip without bone loss.",0
An employee was standing on a ladder using a hammer drill when the drill amputated his left pinky finger.,1
An employee was spraying a rotating thigh de-boning machine with a high-pressure hose when her left hand became caught in the machine. Her left hand and arm were fractured.,1
An employee was installing underground powerlines on a very hot day when he started to sweat profusely and experienced heat cramps. He was hospitalized for heat stress.,1
"An employee was lifting a cylinder off a rack when it slipped and caught the employee's right index finger between the cylinder and the rack, amputating the fingertip.",1
An employee was trying to catch a steel plate weighing approximately 45 pounds as it fell from a cart when his left pinky finger was caught and partially amputated in an open hole on the plate.,1
"An employee was loading vehicles onto a two-level vehicle hauler. After driving a vehicle onto the upper level of the hauler, the employee exited the driver-side door, slipped, and fell to the concrete ground, breaking both ankles.",1
An employee was cleaning shavings from a drill when a coworker pushed a rail tie down the rollers. The injured employee's left index fingertip was pinched and partially amputated between the tie and the drill.,0
An employee's left arm became caught and injured in a closing wrapper guard door.,1
"An employee was rigging the hook on a crane when his hand was caught between the hook and the D-ring, lacerating his left middle fingertip.",1
"An employee's gloved hand was pulled into a conveyor shaft, twisting the employee's left hand around the shaft and severely spraining the ring finger. The employee was hospitalized overnight.",1
"An employee was working in a yard servicing tires when the employee had an allergic reaction, requiring hospitalization.",1
"An employee was conducting a taste-odor-appearance test when caustic soda that was still in the system entered her mouth, causing a burning sensation and swelling to her lips and tongue.",1
"An employee was beginning to bolt up a section of pipe. The pipe fell, which resulted in the amputation of the left leg above the knee.",1
An employee was troubleshooting the corrugator when his hand came in contact with a rotating part resulting in a right index finger amputation.,1
An employee was operating a miter saw and experienced kickback when the material became bound. The employee's fingers were thrust under the blade which resulted in the amputation of three fingers.,0
"An employee was tightening a bolt from a 4-foot A-frame ladder when the employee fell to the ground, breaking the left leg above the ankle. The employee was hospitalized and had surgery.",1
An employee was walking on a sidewalk when she twisted her ankle and fell toward the sidewalk. She used her left hand to catch herself and broke her left wrist.,1
"An employee set a 400-pound metal spindle on top of a metal table so that he could inspect it. The spindle then rolled off the table and hit his lower left leg, breaking it and requiring surgery.",1
"An employee was performing maintenance on a hoist that was on a mill roof when the employee fell approximately 14 feet through a roof opening to the floor below, suffering a broken right elbow, broken right pelvis, and head trauma.",1
"An employee was using a forklift to pull merchandise from a shelf when the employee was pinned between the forklift and a steel column, suffering a fractured rib, head bleed, and fracture to the left temporal area.",1
"An employee was using hydraulic tongs to run pipe in a hole when the slips failed, causing the tongs to come down on the employee's right foot, fracturing it.",1
An employee was tripping pipe when his finger was caught and amputated between a set of power tongs and a pipe wrench.,0
"An employee was trying to enter a room when she collided with a coworker, fell backward, and struck her head on the concrete floor. She sustained a contusion to the back of her head and a small brain hemorrhage, requiring hospitalization.",1
An employee was changing out a motor on a piece of equipment when the employee's right middle fingertip was caught and amputated between the equipment's chain and sprocket.,0
"An employee was sorting lumber at an edger saw when a board became hung up on a cross-tie. As he tried to remove the board, the cross-tie fell and the lumber fractured his left index and middle fingers.",1
"On July 26, 2017, an employee drove a utility vehicle up a hill to refuel a water pump. While driving the vehicle off the hill, the employee ran into mud, at which time the vehicle's back end kicked out. As he was trying to stop the vehicle, he fractured his left tibia, requiring hospitalization.",1
"An employee had been assisting with a pipe weld. During clean-up operations, he began experiencing muscle cramps and shortness of breath. He was hospitalized for heat-related illness.",1
An employee was digging a ditch for an electrical line when he suffered from dehydration and heat exhaustion.,1
"While adjusting a cotter pin in an engine, an employee's finger was injured, which resulted in the amputation of the fingertip.",0
"The injured employee was standing on a wellhead that weighed about 8,000 pounds. The wellhead was sitting on a ring gasket about 10 feet off the floor. While the employee was unlatching the chain from the elevator to the wellhead, his colleague moved the elevator. The employee and the wellhead fell about 10 feet to the ground. The employee was hospitalized for a lacerated liver and spleen, as well as multiple fractures, which included several ribs, the pelvis, and the left arm.",1
"While loading a forklift, an employee sustained a broken arm when the forklift fell on him.",1
"An employee was walking and guiding a steel stairway suspended by a 7,000 pound forklift and had his right foot run over by the forklift causing a severe dislocation requiring surgery.",1
An employee was putting a tire on a vehicle that was on the automotive lift. The employee passed out due to heat exhaustion and struck his face and jaw on the metal lift frame resulting in a fractured lower jaw.,1
The employee had dismounted his pallet jack and was selecting the store order when another employee who was driving a forklift attempted to pass him. The selecting employee was struck by the forklift on his left foot as the forklift passed by resulting in a crushing injury.,1
An employee was replacing a roller belt on a conveyor system. The conveyor was running at the time and the employee sustained a partial amputation injury.,0
An employee was feeding a bearing through a machine when the grinding wheel shattered and severed a finger.,1
An employee was trimming trees and suffered a heat related illness.,1
An employee was asked to hold a wrench that was attached with a rope to a rod. The employee was retrieving the rod from the ground while the jaw on the drill rig was turning and the employee's left lower arm got caught between the wrench and the drill rig jaw. He was hospitalized for injuries to his lower left arm.,1
An employee was walking down concrete steps and caught his heel on the last step falling backwards. Both knees buckled due to the way he landed on his feet. The employee suffered torn patellar tendons in both knees.,1
An employee was cleaning the boiler sink when he lost his footing on a three step ladder and fell into the boiler sink resulting in burns to his lower extremities. He was admitted to the hospital.,1
"An employee was securing tarps over a load of lumber with bungee straps. The ""s"" hook came out of the grommet and the bungee strap recoiled and the ""s"" hook struck the employee's right eye resulting in a severe laceration.",1
An employee was cleaning out a clogged mixer. The mixer cycled while the employee's hand was inside and partially amputated her left middle finger. The guard had been removed at the time.,0
An employee was on a pipe rack guiding pipe as it was being loaded. The employee fell 13 feet and broke his ribs.,1
An employee had been removing valve caps from acetylene cylinders using an electric drill equipped with an attachment. Acetylene gas was ignited by a spark and the employee was hospitalized for burns.,1
An employee had his hand in a door when he stumbled. The door closed pinching his finger and crushing the middle fingertip. The employee had the fingertip surgically removed.,0
"An employee was loading pallets onto a trailer. After loading one, he turned and tripped on another pallet inside the trailer and fell resulting in a dislocated right knee and patellar tendon rupture.",1
"On 7/26/2017, an employee was working on the forms and finishing concrete of curbs / sidewalks / driveways at a worksite. At the end of the workday, the employee started to experience cramping in their hands and legs. On 7/27/2017, the employee was admitted to the hospital for heat exhaustion.",1
"On July 27, 2017, at approximately 7:10 a.m., while an employee was using a shear machine to cut a piece of steel, the back end of the steel came down and pinched their finger between the table top and the steel piece. The employee suffered an amputation to the left middle fingertip.",0
An employee was chipping asphalt in a dump truck. The employee tossed the spud bar from the truck and caught his right index finger between the spud bar and the truck body resulting in amputation of the first digit.,0
An employee was climbing a ladder to access a roof and fell off the ladder resulting in a fractured rib.,1
An employee was stepping onto the top rung of a steel 3-rung fixed ladder when he slipped and hit his shin resulting in a fractured tibia.,1
"An employee was observing a distillation column. He walked inside an area that was barricaded by a scaffold and fell approximately 25 feet, hitting a pipe on the way down. The employee was hospitalized with a skull fracture, facial fracture, back injury, and also needed sutures.",1
An employee was cleaning out debris from a rip saw. The blade had not stopped moving and contacted the employee's finger. The pinky finger was amputated between the second and third joints.,0
An employee working with meat on a conveyor had his finger amputated when it was caught in the running conveyor.,0
An employee was shaking metal bar joists bundled on the forklifts to separate the metal bar joists and to move them to the staging area for edge grinding. One metal bar joist broke free from the bundle and smashed the employee's finger in between the metal joist and the forks of the forklift. The employee suffered an amputation to his left middle finger up to the first knuckle.,0
An employee's left index finger was amputated when it was caught in a door jam.,0
"An employee was pumping lead molds in a work environment of 95 degrees Fahrenheit. After finishing his shift, the employee became dehydrated and had cramps. The employee was hospitalized.",1
An employee had been installing insulation and leaned against the safety rail of a second story interior balcony and fell approximately 12 feet to the concrete floor. The employee sustained a back injury and fractured vertebrae.,1
"An employee had a metal die (121"" long, 6"" high, 7"" deep ) on a bending machine. The metal die fell 103 inches to the ground and onto his legs, shattering bones in his right leg.",1
"An employee was conducting steel roofing work and fell approximately 17 feet from the roof, breaking the hip and arm.",1
An employee was signing papers when the wall of a mobile home came down and struck her on the back resulting in a vertebra compression injury.,1
An employee was walking on the flat metal roof of a warehouse and fell through a skylight resulting in broken ribs and lacerations.,1
An employee was assembling a scaffold and fell approximately 12 feet resulting in a left hip fracture and a right shoulder contusion. A harness was not worn at the time of the incident.,1
An employee was operating a punch press and suffered an amputation injury to the left hand.,1
"On July 27, 2017, at approximately 12:00 p.m., an employee was cleaning out the radish topper and reached inside to remove material. The machine was running and the employee's right middle fingertip was amputated.",0
An employee sustained left arm and leg contusions while driving a utility vehicle off road when the vehicle struck a tree.,1
A temporary employee was operating a mill machine which had two-handed controls. Her glove got caught in the spindle resulting in an amputation.,0
"An employee was operating an excavator to excavate a pipeline. While scooping the bucket toward the machine, it hit a rock, and a tooth broke off and went through the windshield of the excavator. The employee sustained a broken right leg.",1
"An employee was walking into the building after lunch when the wind slammed the door on his pointer finger, amputating the fingertip.",1
An employee suffered a shoulder dislocation while carrying a sheet of membrane to another location with another employee.,1
An employee was walking a horse when the horse reared up and kicked the employee. The employee's right arm was broken in two places requiring surgery and hospitalization.,1
"While walking down the hallway, an employee slipped and fell fracturing the left patella.",1
An employee was driving a powered industrial vehicle and struck a wall resulting in an amputation injury.,0
"While driving a standup forklift, an employee's left foot was pinned and injured between the forklift and a concrete bollard.",1
"An employee fell three feet off a metal rack system, resulting in head trauma requiring hospitalization.",1
"An employee was operating a forklift when another forklift ran into the injured employee, causing a laceration to the foot.",1
An employee was hospitalized after being splashed with frying oil.,1
"The injured employee and another employee were lining up a W access adapter/base plate. Three of the four bearing pins were located/lined up. The fourth pin was then located/lined up and the base dropped, pinching the injured employee's thumb. The employee pulled his thumb away from the base resulting in amputation of soft tissue.",0
"An employee was performing preventative maintenance on a conveyor. While using a towel to wipe down the equipment, the employee sustained an avulsion to the left index finger and an amputation to the first knuckle of the left middle finger. The equipment was running at the time.",0
"An employee was operating a food slicer to cut potatoes, when her fingers made contact with the blade. The first two fingertips on right hand were amputated, and a nail was damaged.",0
The injured employee was inside the plant in the basket of a 60' aerial lift with another employee at the lift controls. The injured employee's head was pinned between the basket and the ceiling beam resulting in a fractured skull and bleeding from the nose and mouth. The injuries will require surgery.,1
An employee was repairing a 55-gallon stainless steel mixing tank from a six foot step ladder. He was positioned on the second step of the ladder when he miss-stepped and slid down the side of the tank. He was hospitalized for internal bleeding.,1
"An employee was unloading a piggyback forklift from a tandem truck. The employee observed his truck rolling away and while attempting to catch his truck he was run over, resulting in a broken right foot.",1
"An employee was on a stack of lumber and fell about 10 feet, resulting in a skull fracture.",1
An employee was struck by a trackhoe resulting in a broken right foot.,1
An employee was injured during tear down of an oil rig to be transported and set up at a new drilling site. The employee removed a retaining pin that held the pole upright and the pole fell onto the employee's leg breaking the femur bone and requiring surgery and hospitalization.,1
"Two employees tried to calm a resident. The resident bit one of the employees, resulting in an amputation of the right thumb in the middle of the nail.",1
"On 7/28/17, an employee was descending the stairwell and fell breaking a bone in their back.",1
"On July 28, 2017, an employee suffered an amputation of the left ring finger when changing a mold.",0
"At the packaging area in the facility, there was a piece of plastic hanging up to block cold air from a shrink tunnel cooler from blowing towards an employee's work station. The employee was placing a sticker to hold the plastic in place when her finger contacted the return side of the conveyor belt and was pinched between the belt and a metal support leg. The employee sustained an amputation to her left second digit below the first joint.",1
An employee was backing a forklift into the building. A finger was caught between the forklift and the garage door track resulting in a crushing injury that required amputation of the finger during surgery.,0
"An employee's fingers were in the belt guard of a jammed and inoperable conveyor. Once the jam was cleared, the conveyor started to cycle and three fingers on the left hand were amputated.",0
An employee working in an overhead lift was crushed by a structural ceiling beam when the lift inadvertently went into gear.,1
"An employee was tracing overhead conduit in a mechanical room. The room has HVAC ductwork that runs from the ceiling down to 2' x 2' louvers in the floor. As the employee was looking up at the conduit, he stepped backwards and fell through one of the louvers approximately 10 feet to a lower level, suffering a head injury.",1
"On July 28, 2017, an employee was removing metal parts from the laser table and stacking them on a skid. As the employee placed a part (approximately 100 lbs.) on the skid, the left middle finger was pinched between two parts resulting in a distal amputation of the finger.",0
"An employee was assisting in rigging the pull head from the trench box. The pull head slipped out of the chain while suspended and fell to the ground, striking the employee and causing a fractured right scapula, fractured sternum, nine fractured ribs, and a bruised right lung.",1
An employee was installing an electrical box (110 outlet) and received an electrical shock causing electrical injuries and burns on the center chest (entry point) and burns on the left hand (exit point).,1
"An employee was using a circular saw to cross-cut a 2"" x 6"" board. The employee reached under the saw and his left middle finger was cut.",1
An employee was handling plants in the warehouse and inhaled some pollen from an Aglaonema plant causing an allergic reaction that required hospitalization.,1
"An employee parked a pickup truck close to a bin and got out. He tripped on the foundation or something leaning against the bin and fell, breaking his arm.",1
"An employee received electrical burns on the right arm, neck and face when a stirrup fell and struck an energized part causing an arc flash.",1
An employee's foot was struck by a forklift's rear wheel. The employee required hospitalization for a broken bone.,1
An employee was clearing a jam on the hot fill machine and amputated the left index fingertip when the machine started up unexpectedly. The machine was not locked out/tagged out at the time of the incident.,0
An employee was removing scale from a furnace and was overcome by heat stress. The employee was hospitalized.,1
An employee was on a ladder nailing struts. The employee fell off the ladder and sustained a back injury requiring hospitalization.,1
"An employee had been working on a frack tank, when a truck hit the tank, causing the tank to hit the employee. The employee required hospitalization for a compound fracture of the left leg.",1
"On July 27, 2017, an employee had been welding on steel casing outside. The employee felt sick/nauseous and went home. On July 28, 2017, the employee tried to work but felt nauseated and sick by 2:00 p.m. and went to the hospital for heat exhaustion.",1
An employee was welding a muffler onto a backup generator and something got under his glove and into the skin on his right finger. The employee was hospitalized the next day for an infection.,1
An employee put on work gloves and felt a stinging sensation due to a possible insect bite.,1
An employee was putting a piece of asphalt in the barrel of a skip loader and the tip of his left middle finger was pinched between the loader and the piece of asphalt. This resulted in a partial finger amputation.,0
An employee was in a manlift preparing to pressure wash a pump jack. When the pump jack lowered it struck the manlift basket. The employee suffered two broken toes on the left foot.,1
"An employee was walking up stairs from the lower parking lot to the upper parking lot. At the top of the stairs, the employee fell and her right knee hit the paving bricks/concrete on the ground, fracturing the knee.",1
An employee took wood from the bin off the side of the large forklift. While he was handing the wood to another employee the rear tire of the forklift rolled up onto his left heel. His foot was pinned by the tire and the forklift had to be reversed off the foot. The employee sustained a broken ankle.,1
An employee was walking up a set of portable steps while carrying racking to stack in a trailer. The employee fell down three steps and was hospitalized for three broken ribs and a cut to the head requiring stitches.,1
While changing out a paper core on the DRC machine an employee's hand was caught in a running nip point resulting in an amputation on the right hand.,1
"While clearing a piece of stuck paper, an employee sustained finger lacerations and amputation of the left middle and ring fingertips after their hand was pulled into the rope/sheave nips in the after-dryer section of the paper machine.",0
"An employee was hanging drywall while on a ladder when he slipped and fell to the floor, fracturing his knee cap.",1
"While rigging up the top drive, employees needed to move the Kelly hose into position. They had to swing the ST-80 all the way around. The injured employee was in a crush point, and his foot was caught while stepping out of the crush point. The ST-80 was pulled over, trapping the employee's body between the ST-80 and the derrick leg. The employee sustained three broken ribs, a lacerated liver, and a collapsed lung, all on the right side.",1
An employee was working to reposition an exhaust hood. The hood fell over and the employee sustained an ankle injury.,1
"An employee was working with a high pressure pump replacing swab. When the cap plug was unscrewed it fell out onto the employee's right middle finger, breaking the finger.",1
An employee was unloading stock from a trailer and was hospitalized for dehydration.,1
An employee slipped on a wet surface while on a roof and tore his hamstring. He was admitted to the hospital the following day.,1
"While an employee was removing a clamp from manifold plungers, the plungers came together and amputated the middle and ring fingertips on the left hand.",0
"While conducting maintenance, an employee was pinned by a counterweight on a machine and sustained a chest injury. The machine was not locked out at the time.",1
An employee was standing outside a storage tank while water blasting operations were being conducted inside. The employee's upper legs were cut by water coming out of the manway from a water blaster being used to blast asphalt inside the storage tank.,1
"On July 29, 2017, an employee operating a forklift received an injury that resulted in the amputation of the lower right leg.",1
An employee was delivering mail and became dizzy and sweaty. The employee was hospitalized for a dehydration related injury.,1
"An employee was walking across stored rebar on the ground to access some framework angle iron. He retrieved a piece of angle iron and was returning back across the rebar, when he slipped and fell. The band of rebar that was being carried in his right hand came down on his left ring finger causing an open fracture which required surgery.",1
An employee was using a sledgehammer to hit a piece of pipe. The hammer deflected and smashed his right pinky finger between the head of the hammer and the tubing tongs. The employee sustained a laceration and fracture to his right pinky finger resulting in hospitalization.,1
"The employee was assisting with mobile rig removal from a well site. As pipe was being pulled from the hole, rope used for pullout got caught up and pipe began to slip. The employee reached in to grab the pipe and his hand/finger was caught between piping and the drilling equipment, resulting in amputation of the right middle finger down to the knuckle.",1
An employee was hospitalized for heat stress.,1
"An employee was loading an empty trailer with rolls of paper using a forklift. The employee began experiencing irritation to his eyes, lips and respiratory system. The employee started having chest pains and leg muscle spasms approximately two hours later and was hospitalized.",1
"An employee was cleaning the palletizer and was caught/struck by the machine, resulting in a fractured foot.",1
"While conducting maintenance on an actuator valve on a milk tank, an employee sustained a fingertip amputation.",0
An employee working on the HVAC system on the roof became nauseous and couldn't keep fluids down. The employee was hospitalized for heat related illness.,1
"On July 30, 2017, a temporary employee was operating an off-road vehicle on the beach when the vehicle rolled over and injured his left foot. He was hospitalized for surgery.",1
"An employee tripped over a floor mat and fell, sustaining a fractured left forearm.",1
"An employee was operating an order picker in the elevated position when it malfunctioned and he was unable to lower the unit and himself to ground level. As he was attempting to activate the unit, his right hand was caught in a pinch point between the unit's rail and arm, suffering compression injuries.",1
"On 7/31/2017, an employee was trying to repair a spiker machine. The employee was working under the machine and could not reach a broken screw. Another employee got in the machine and made an adjustment to the anvil so that the other employee could reach the screw. After the adjustment was made, the employee accidentally pumped the controls for the anvil again, causing it to cycle and pin the other employee's right hand to the track. The anvil then hammered approximately 3 to 5 times, crushing the employee's right index finger and requiring surgical amputation. The machine was not locked/tagged out at the time.",0
"While unloading a pallet, an employee turned and slipped, falling on the right hip and fracturing it.",1
"While an employee was removing a steel stall with a chain to load on a crane, the steel stall shifted causing the amputation of his left index finger.",1
"An employee was starting the main compressor and checking it to see if it was operating correctly. The main airline supply hose, which comes from the air dryer to the sandblasting pot, came off and struck the employee in the lower right leg, resulting in a fractured tibia and fibula.",1
An employee was putting a part in the circular saw. The employee's left index finger got caught in the connector hole and the saw came down resulting in a fingertip amputation.,0
"At approximately 9:10 AM, an employee was milling rubber using a milling machine. As he was feeding rubber into the machine, his right hand was pulled into the area between the two rollers.  The employee sustained an amputation to the tip of his right ring finger, and avulsions to his right index and middle fingers.",0
While carrying and loading cast iron boiler parts into a trailer an employee's fingertip was caught and amputated between boiler parts.,1
The injured employee was assisting a truck driver from another company when the truck lurched forward and ran over the employee. The employee was hospitalized with a broken pelvis and a ruptured bladder.,1
An employee suffered a heat-related illnesses while picking up trash.,1
"An employee was on the roof of a building and was cutting a six-inch pipe to install a device on it. The grinder he was using kicked back, cut through his glove, and cut a tendon on his right hand.",1
"Two employees were working in a man lift basket about 12 to 13 feet off the ground. They were using an overhead hoist to reposition a piece of equipment they were working on in the vertical boring mill. As the overhead hoist was being lowered, the limit switch plate of the hoist came in contact with an employee's left hand, which was resting on the man lift railing. The injured employee sustained the amputation of the left pinky fingertip.",0
"An employee was clearing land and piling up debris to burn. As the employee was about to use diesel and a lighting touch to light up the pile of debris, he was exposed to fire and sustained burns to his arms, face, and the top of his back.",1
An employee was using the chain saw to remove the chime bone from rib-eye meat and amputated the right thumb tip.,0
An employee was bringing up mail in a cart from the basement. The employee exited the freight elevator and went to open the door to the lobby with her left hand. When she pulled on the door it gave no resistance and flew open. The employee's left pinky finger was caught and fractured between the steel casing for the doorstop and the door handle.,1
An employee had been working on building a foundation for a residential home. The employee was cleaning up for the day and collapsed from heat exhaustion.,1
An employee fell from the passenger side rear step of a garbage truck during routine collection. The employee sustained head and arm injuries.,1
An employee was operating a pallet jack and struck a safety kick plate. The employee fell to the ground.,1
An employee was doing milling work on a part using a milling machine when his right thumb was caught and partially amputated.,0
"An employee was cutting 4"" round solid bar stock on a band saw. When the employee reached to retrieve a part, the blade amputated part of the index and middle fingers.",1
An employee was positioned between a dynamic tamp table and a static structure when his body hit a switch that engaged the tamp table. The employee sustained a fracture to his left pelvic area.,1
An employee's left ankle was caught and fractured between a gantry press and a work table when the gantry rolled laterally.,1
"On July 31, 2017, an employee suffered a broken leg when a pipe plug released under the pressure of compressed air and struck the employee.",1
"An employee was on a loading dock attempting to open the back door of a tractor trailer. The tractor trailer pulled away from the loading dock and the employee fell off the loading dock. The employee sustained right leg fractures to the femur and fibula, as well as a broken tibia and clavicle.",1
"On July 31, 2017, an employee's finger was crushed between a concrete form and a curved radius bar during form stripping operations. The employee sustained a partial amputation of the middle fingertip on the right hand.",0
While climbing down from a fire engine an employee's wedding ring was caught on a protrusion and the left ring finger was amputated.,1
"While working at a construction site, an employee fell from height and was hospitalized with a broken foot, hand and pelvis.",1
An employee was lifting a portable generator when it fell on his ring finger amputating the fingertip.,0
An employee was standing on a 6-foot ladder using a handheld grinder to grind the sidewall inside of a rail car. The guard on the grinder slipped and the grinder wheel fell off striking the employee's index finger resulting in a fingertip amputation.,1
"On July 31, 2017, an employee's hand was crushed while reaching into a machine to make an adjustment. The employee received an amputation to the right hand.",0
"Two employees were working from a scissor lift. When the lift moved, one employee had his fingers caught between the lift and a line-up pin, causing the amputation of the right middle fingertip.",0
An employee fell three to four feet from a ladder and landed on process piping. The employee sustained a fracture and a possible bulging disk in his back.,1
An employee was approaching a pad-mounted transformer in preparation to perform voltage testing. The employee made contact with live electrical components within the transformer and suffered electrical shock.,1
"While working on a pre-cast concrete panel, both welds for the hinged joint were cut through, causing the panel to separate, twist, and then collapse while the employee was on it. The employee fell to the ground and was subsequently hospitalized with a broken leg and head trauma.",1
An employee was packaging cheese and had the left middle fingertip amputated by the packaging machinery.,1
"An employee tripped over a wire cord and fell, sustaining a fractured left knee cap.",1
"On July 31, 2017, an employee was assisting in the removal of bridge beams and was pinned between two bridge beams, resulting in hospitalization for a fractured clavicle and fractured ribs.",1
An employee was painting the peak in the front of a house from an extension ladder. The ladder slid out and hit the ground. The employee fell from the ladder and suffered broken vertebrae and paralysis.,1
"An employee was leaving the building from the back entrance to go on break for lunch. The walkways are covered, but it was raining heavily due to a tropical storm. The employee slid on water, falling on and breaking her leg and knee.",1
"As a container was being hooked up to the coupler of a spotter unit, the hook missed the coupler and the chassis of the container struck an employee who was sitting on the floor of the spotter unit. The employee sustained fractures to both tibias.",1
An employee was operating an electric pallet jack to transport a forklift truck battery when his leg was caught between the pallet jack and the frame of the battery racking system resulting in an amputation injury to the employee's leg.,1
"An employee was working under a piece of equipment that was on jacks. A jack slipped and the employee was pinned under the equipment, sustaining broken ribs.",1
"While relocating a 12-inch separator, an employee's arm got wedged between the separator and a wall. The employee sustained a broken left arm.",1
An employee was assisting in elevator installation and was hit in the head by a brick that fell from two stories above resulting in a possible concussion.,1
"An employee was conducting a tug test with a tractor trailer and suffered chest pains, dizziness and shortness of breath due to exertion.",1
"While getting up from a kneeling position, an employee lost his balance, stumbled backwards and fell fracturing the left wrist.",1
"An employee was adjusting the pressure bolt of the hot stamp press and the press engaged, resulting in the amputation of the right pinky fingertip.",0
An employee was on a 4-foot ladder to remove tape from the store window. The employee fell from the ladder and fractured his left leg.,1
"While pushing a bus chassis, an employee's foot was run over by the chassis, resulting in fractures.",1
An employee was cutting a lift loop block with a chop saw when his glove was caught in the blade. This resulted in partial amputation of the left thumb.,1
An employee was bending a piece of metal using the press brake and his foot got stuck in the lever that operates the machine. The press cycled while his hand was on the piece of metal and his thumb was smashed between the side of the press and the piece of metal. The employee's left thumb was partially amputated.,0
"An employee was operating a vehicle to move traffic control drums from a closed lane to the shoulder. She was traveling 5 to 10 miles per hour when she crashed into the road's barrier wall, striking her knee on the plastic and metal underneath her vehicle's steering column. She suffered a knee laceration, fractured ribs, and a liver laceration, requiring hospitalization and surgery.",1
"While operating an ATV on rough terrain, an employee was ejected over the handle bars. The employee was hospitalized for a broken clavicle and three broken ribs.",1
"An employee was exiting the building and going down stairs. The employee tripped and fell down one step, breaking the right tibia and right wrist.",1
An employee making deliveries fell and injured his head while walking towards his vehicle.,1
"An employee was installing a drain liner inside a 30-inch drain line. While circulating hot water inside the drain line, the hose carrying the hot water came loose, splashing hot water onto the employee and causing burns to 60% of his body.",1
"While operating a standup forklift, an employee had his foot crushed between the forklift and a barricade.",1
An employee was assisting with fuse installation in a 480-volt electrical panel and was exposed to an arc flash resulting in burns to the face and left eye.,1
"An employee was pushing a cart to her work station when a forklift traveling in the opposite direction struck the cart, causing the employee to fall backwards and land on her hip. The employee was hospitalized for a broken hip and femur.",1
"An employee began to exhibit signs of heat exhaustion while processing packages in a building, requiring hospitalization for heat-related illness.",1
"An employee was working on the tail pulley of the cold feed bin, trying to center the belt. The employee's wrench slipped and his right arm was caught in the pulley resulting in the amputation of the right arm from the elbow down.",1
"An employee was clearing a jam on a machine using a tool. The tool and his hand went into the belt and pulley system, causing a partial amputation of the left thumb.",0
"An employee was hoisting up the scale weight with the help of another employee. The injured employee had a hand on the cable that held the hoist. When the scale weight got near the floor, the employee's right hand was caught in the pulley and the index finger was smashed. The employee's index finger was amputated and the middle finger injured.",0
"An employee was operating an ergonomic folding machine. A gown became caught in the back side of the folding machine. As the employee was clearing the jam, the folding machine engaged and caught the employee's left arm, pulling it into the roller. The employee suffered a laceration on the upper left arm and broken bones in his left forearm. The employee was hospitalized for surgery.",1
An employee was retrieving a parcel from his truck and lost his footing and fell. The employee was hospitalized for a possible fractured tailbone.,1
An employee was working at a polisher machine when the conveyor jammed. He reached inside the machine with his left hand and the middle finger was amputated up to the knuckle. The machine was not guarded at the time.,1
"An employee was working on a hydraulic crane when part of the crane came down and smashed the employee's finger, resulting in amputation of the right index fingertip.",1
An employee was connecting two trailers when the dolly rolled back and crushed his left pinky finger.,1
An employee intervened in a physical conflict between students and was pushed to the floor resulting in a broken upper left arm.,1
An employee was conducting sandblasting operations and was struck by the sandblaster spray. His leg was injured above the knee and required hospitalization.,1
An employee was moving a dump box with a forklift when the load shifted and pinched his finger causing a fingertip amputation.,1
"While transporting sheets of drywall with a cart, the sheet rock tipped over and fell on the employee's lower right leg breaking the tibia and fibula.",1
"An employee was cleaning a 16-inch butterfly valve weighing approximately 240 pounds. The employee lifted the valve from the saw horses and went to set it on the ground. A finger on his right hand was pinched between the valve and the floor, and was partially amputated.",1
"An employee was holding the end of a measuring tape near the base of an 800-pound switch gear that was on uneven ground. He was helping to measure the switch gear to relocate it when it teetered on the uneven ground and struck one of his left-hand fingers, fracturing it.",1
"While moving a 55-gallon drum, an employee's right ring finger was pinched between the drum and the forklift tine, amputating the fingertip.",0
An employee had completed changing a vehicle's oil. The vehicle was raised and the employee's right index finger got caught between the lift's lock and the lift's lock mechanism resulting in the amputation of his fingertip.,0
"On August 1, 2017, an employee sustained a crushing injury to the right arm while performing maintenance on the hydraulic arm of a residential waste truck.",1
"An employee was picking up her lunch in the cafeteria when she slipped and fell on the wet floor, dislocating her shoulder and breaking her clavicle. She was hospitalized.",1
An employee had been hanging drywall when he became ill and was taken to the hospital for heat exhaustion.,1
An employee was aerating a lawn with hand-held motorized equipment when she became ill and started vomiting. The employee was hospitalized for a heat related illness.,1
"An employee was walking in the parking lot while on their lunch break and was struck by a vehicle, resulting in broken ribs and hospitalization.",1
"An employee went to close the roll-up door to the trailer. There was a strip of metal at the bottom of the door which was attached to the cable that acts as a counterweight to the door. As the door was pulled down, the metal strip became detached from the door and was pulled upward toward the top of the door by the cable.  As this occurred, the employee was cut by the metal strip across both of his wrists and required surgery.",1
"While operating a hydraulic press, an employee's finger was caught in the point of operation, resulting in amputation.",0
"On August 1, 2017, an employee was operating the manual arbor press. While adjusting a part, the ram of the press came down resulting in amputation of the right index finger between the first and second knuckles.",0
"An employee was hospitalized overnight after being struck in the head, back and shoulder by a falling piece of sheet metal.",1
"An employee tripped over a mobility scooter and fell, fracturing the right hip.",1
"An employee was walking back from lunch to his work area when he tripped and fell over a plastic string on the floor, fracturing his left femur.",1
Three temporary employees were building a shelving unit about 10 feet high.  A metal part fell and swung like a pendulum striking one employee on the left side of his head. The injured employee was hospitalized for a head laceration and fractured skull.,1
An employee was operating a chop saw when his middle finger was amputated up to the first knuckle and his index fingertip was also amputated.,0
"An employee entered a sewer manhole after flushing the sewer. As he attempted to exit the approximately 91-inch-deep space, he was exposed to hydrogen sulfide and collapsed. He was hospitalized.",1
"An employee was pumping water from a pond to another nearby pond location. As the employee was walking on an embankment, he tripped and fell on rocks, breaking his leg.",1
"An employee was weatherproofing a construction area by placing plastic in the area. He was tucking weatherproofing around an open door when a coworker closed the door on his right index finger, amputating the fingertip and fracturing the finger.",0
"An employee was standing on a forklift with a spool of pipe and its supporting cribbage. The employee was trying to reposition the pipe spool when the forklift moved, causing the spool to smash the employee's left finger on the supporting cribbage. The employee's left fingertip was amputated.",1
"On August 2, 2017, at approximately 3:30 p.m., an employee was stringing wire through a tree when the limb he was standing on broke. He fell 8 to 10 feet to the ground, suffering fractured ribs and a collapsed lung. He was hospitalized.",1
"An employee was unloading freight in back of the trailer. Freight on load bars had shifted during transit. While removing the load bar that was bracing a crate, the crate tipped toward the employee and fell off the load bars. The crate landed on his leg and pinched his finger between the crate and the floor of the trailer. The employee sustained a right ring fingertip amputation.",0
"On August 2, 2017, an employee was clearing meat from a meat grinder when the blade amputated a fingertip.",0
An employee was making adjustments and repairs on a hydraulic cylinder machine when the cylinder caught the employee's left thumb and middle finger causing amputation injuries.,0
"An employee was wrapping a coil of steel with an ID band at an exit turnstile and slitter cart. His right leg was over the rail between the cart and the end stop when the cart moved and pinned his right leg, breaking it.",1
"An employee was attempting to oil the gears on a positive pasting machine when he heard a noise and observed that a guard was bent. As he attempted to bend the guard back, his left hand slipped from the guard and contacted the gears, amputating his middle, fourth, and fifth fingers.",1
An employee fell off a ladder and broke his leg.,1
"An employee was unloading an aircraft when she was caught between a pallet transport and container loader, breaking her left leg.",1
"An employee changed a former machine setting to make a smaller popcorn tin container and then energized the machine. He found that one of the tin sheets was jammed and was trying to unjam it when the machine was activated. His left hand was caught between the forming mechanism and the mandrel (forms the tin sheet to a cylinder), lacerating it and requiring hospitalization and surgery.",1
An employee was tied off to a D-ring on a pitched roof. The anchor point was not secure and the D-ring came out causing the employee to fall approximately 15 feet and break a leg.,1
"An employee was attempting to retrieve a sifter cube from a roll stand containing two inward moving feeder rolls. The employee's right hand became caught between the feeder roll and the feeder roll guard. The employee was able to pull his hand free, but sustained a crushing injury to the hand.",1
"An employee had been washing the windshield of his truck while standing at ground level, when he slipped on water and fell, breaking the right femur.",1
"An employee was helping to remove forms from a parapet wall over the interstate. Tension was being placed on the form from the opposite side to assist in the removal. The form broke loose from the parapet wall, swung, and struck the scaffold guardrail and the employee. The guardrail broke, and the employee fell approximately 25 feet to the shoulder of the roadway, breaking a leg and suffering lumbar fractures.",1
"While walking into the building, an employee slipped on a wet floor and tore the right hamstring.",1
"An employee was prying back some rebar on a grade beam when he fell backwards approximately 6 feet, striking his head on a 2 x 4 piece of lumber. He was hospitalized with a head injury.",1
An employee was lifting a 25-pound box and heard a crack. The employee was hospitalized for back pain.,1
"An employee was picking up a roll of rubber in the storage shed and lost his footing. He fell on the 4"" storage lip and broke his hip.",1
"While rolling a piece of metal, an employee's hand was caught in the rolling machine resulting in amputation of the right middle finger.",0
"An employee was conducting sheet decking on a roof that was approximately 10 to 14 feet from a lower level when he slipped and fell to the concrete floor below. He fractured his sacral area, right wrist, right elbow, and L1-L2 and L4-L5 vertebrae, requiring hospitalization. The employee was not tied off at the time.",1
"An employee was installing rebar in a curb. When he stood up, he collapsed. The employee was hospitalized for a possible heat-related illness and dehydration.",1
"An employee was unloading palletized loads of residential doors from the back of a truck when the employee was blown off the truck to the asphalt, suffering back, rib, tailbone, and kidney injuries that required hospitalization.",1
"While operating a floor stripper, an employee slipped and fell into the floor stripper sustaining second-degree burns.",1
"An employee was operating a handheld circular saw to cut a 2 x 4 when it slipped and his left hand contacted the blade, amputating his index finger.",0
"An employee was walking down steps in the parking garage. The employee missed the last step, rolled her foot and fractured her right ankle requiring hospitalization.",1
"An employee lost his balance and fell on the floor, fracturing the right wrist.",1
"An employee was trying to adjust the roll stock on a packaging machine when her hand became caught in the machine's sealing part, breaking three fingers and partially amputating her middle fingertip.",1
"An employee was removing a jammed package from the underside of a conveyor. As the employee pulled the package out, the moving conveyor caught the employee's arm and pulled it through the roller causing injury to the employee's hand and arm.",1
An employee was working on leveling prefabricated metal stairs while in a scissor lift. The stairs slipped off supports and struck the scissor lift knocking it over. The employee was ejected from the lift and sustained fractures to his arm and finger.,1
"An employee was approaching a residence to deliver mail when he stepped onto the porch and fell, fracturing his hip. He was hospitalized overnight.",1
"An employee was walking back to the office, tripped over a wheel chock and fell resulting in a concussion.",1
"An employee was pushing a box of plastic caps through the traffic arm on a conveyor system, which opened to allow the box to pass. The employee had his other hand resting on top of the hinged component of the traffic arm and as the arm moved, it pinched and amputated his finger. The traffic arm was unguarded at the time.",0
"An employee was working on a truck's rear brakes when a spring keeper broke. The spring then flew off and struck the employee's left forearm. The spring was embedded in the employee's arm, requiring surgery.",1
"An employee was walking beside a wheeled trailer when the trailer struck the employee's left leg, breaking the foot and tearing a knee ligament. The employee was hospitalized.",1
" An employee was trying to unclog a concrete hopper on a small conveyor line when the employee tripped on the equipment cribbing and fell into the conveyor belt. The employee suffered a broken right arm, dislocated left arm, and lacerations.",1
"While shrink wrapping a pallet of merchandise, an employee tripped and fell 20 feet through a hole where a piece of decking was missing, suffering a broken elbow and ribs, as well as various cuts and bruises.",1
"An employee was using his hand to inspect a tube that was being processed in a mill roll machine when his right hand entered the mill roll, amputating his pinky fingertip.",0
"An employee was raising an aircraft maintenance stand with a pump handle when the pump handle broke off and the employee fell approximately 5 feet from the stand to the ground, suffering a broken hip.",1
"An employee was moving an empty pallet jack used to hoist bags of whey to a platform when her hand was caught between the jack and a safety rail, crushing her right index finger. Her finger had to be surgically amputated below the first joint.",1
"An employee was purposefully struck by a customer's vehicle, suffering a concussion, fractured leg, and contusions.

Note: Code as violence.  Delete note afterwards.",1
"An employee had just completed an abatement job and was using a water hose to wash down the area when a flash fire occurred from some piping in the operating unit, burning the employee.",1
"While preparing to change a drill bit on a drilling machine, the Kelly bar moved resulting in amputation of the employee's right middle finger.",0
"An employee's finger was caught in the jam of the office door as it closed, amputating the fingertip.",0
"An employee was holding a shower door open for a patient when the door shut on her right pinky finger, causing a possible fracture that required hospitalization and surgery.",1
"An employee was lowering a drum using a drum dolly. When the employee released the dolly, the drum and the dolly hit the ground. When the drum made contact with the ground, it kicked the dolly backwards into the employee's right forearm, striking it with the handle. He suffered contusions to the right forearm and elbow, requiring hospitalization.",1
"An employee was attempting to unclog/unjam a spray paint gun. When he pulled the trigger to verify if it was unclogged, his left middle finger was injected with paint.",1
"An employee was using a rake to dislodge a stick jam in an oversized chip conveyor when his left arm was pulled into the conveyor belt. His arm broke, requiring hospitalization.",1
"An employee was exiting through a door. His hands were between the door jam and the door when the wind blew the door shut on the employee's right thumb, partially amputating the upper tip.",1
An employee was walking from the front kitchen to the back kitchen when she tripped over a box used to store dirty pans. She fell on the concrete floor and broke her left hip and left femur.,1
An employee was taking a product sample from an extruder machine when the employee's right index finger was caught and amputated in the moving auger. The machine was unguarded at the time.,0
"An employee was trying to remove a pin from the west end of a billet reject beam when the beam became loose and struck the employee on the left leg, fracturing the tibia and requiring hospitalization.",1
"On August 3, 2017, an employee was checking an air leak on a pneumatic conveyor system when the employee's left middle finger was caught in the conveyor drive. The employee suffered fractures and abrasions to the left index and middle fingers.",1
"An employee was standing on the bottom support rail of a cart about 6 inches off the ground. As she stepped off, she rolled and fractured her left ankle.",1
An employee had been working outside in hot and humid conditions. The employee became dehydrated and was hospitalized for heat exposure.,1
"An employee was brushing debris from a hole that was being drilled on a drill press when the employee's glove was caught in the rotating drill bit, pulling in their left hand and amputating the pinky finger.",0
"The injured employee was getting a steel plate positioned in the plate rack to place a plate clamp onto the material to remove it from the rack. Another employee was assisting by separating the plates to create room for the plate clamp. The pry bar slipped out of position allowing the plates to start falling back into their original position. As the plates were falling, the injured employee reached out to stop them and pinched the left middle finger between the plates resulting in a fingertip amputation.",0
"On August 3, 2017, at approximately 9:00 a.m., an employee was tending a well while standing between two gas production units approximately 15 feet from a sand separator. At that time, a threaded pipe that was going into the top of the sand separator blew apart. The pipe separated at a 90 degree elbow and released approximately 2,300 lbs. of pressure. The gas from the line projected down towards the ground and the employee's skin was struck by ground debris. He was hospitalized.",1
An employee fell approximately 13 feet and broke a leg.,1
An employee was helping to load concrete footers into a truck bed when one of them struck his leg and caused him to fall off the truck. He fractured his left leg/foot.,1
"An employee fractured both ankles when she slipped off a curb, requiring hospitalization.",1
"An employee was operating an excavation compaction roller up the side of a hill when his roller began losing traction and spun out, causing him to fall out of the vehicle. The roller landed on top of him, pinning and crushing him underneath.",1
"While climbing a ladder to fix the tarp on a chip trailer, an employee fell onto a catwalk below. The employee suffered a head laceration, L1 vertebra fracture, and cracked and bruised ribs.",1
"While placing a cover on an electrical box, an employee fell off an 8-foot stepladder and hit his head on the floor.",1
"An employee was crossing from one building to another through a glass-enclosed walkway when she slipped and fell to the ground, breaking her right hip and requiring surgery.",1
"While moving a refrigerator through a doorway, an employee amputated the right index finger when it was caught inside a hole in the metal doorframe.",0
An employee was using a metal hook to remove pork loins from a metal grid conveyor belt coming from a freezer tunnel when the hook was caught in the metal grid and his left thumb was pinched between the conveyor belt and hook handle. His left thumb tip was amputated below the nail.,0
"An employee was looking for a piece of freight when he slipped, possibly on hydraulic fluid from a forklift, and ruptured a tendon in his leg.",1
"An employee had cut a 4-foot maple sapling at the base. When he went to push it over, the sapling hit a broken limb on a dead tree. The limb struck the employee in the face causing facial fractures and a broken nose.",1
An employee was using a forklift to unload product inside a truck trailer when the truck (with trailer attached) started to pull away. Both the employee and forklift fell out of the trailer and landed on the ground below. The employee was hospitalized overnight with a lower back sprain.,1
An employee was operating a vertical sander to sand rough edges on a guard/rail when the sander cut and amputated his left thumb.,1
"An employee worked alone for an extended period of time in an enclosed cold storage room using a propane-fueled forklift to move, stack, and store pallets of peaches. The forklift had an exhaust issue, and the employee experienced an overexposure to carbon monoxide. The employee was hospitalized for carbon monoxide poisoning.",1
An employee was removing the rear guards on his truck to unload it when his right pinky fingertip was caught and amputated between the truck bed and guards.,0
An employee was walking with a French press coffeemaker when he slipped and fell. The French press glass shattered and deeply lacerated his right wrist.,1
An employee was moving a 60-pound jack while removing a part from a service vehicle when he lost his balance. His left index fingertip was then caught and amputated between metal shelving and the jack.,0
"A forklift delivered a work roll to the roll shop for repairs. The forklift lowered the forks to the ground with the roll on the forks. The operator then slightly tilted the forks to have the roll come off the forks. An employee was using a steel bar to attempt to stop the roll. The momentum of the roll forced the bar from his hands and struck his lower left leg, breaking the fibula/tibia.",1
"An employee fell approximately 52 feet to the water below while painting a bridge, dislocating a shoulder.",1
"An employee slipped while stepping off a ladder, dislocating an ankle.",1
"On August 4, 2017, an employee was troubleshooting a vacuum system when the employee was sprayed with a hot caustic boil solution, suffering thermal/chemical burns to the back and arms.",1
"An employee was operating forklift to raise and move a pump into a building when the pump began to swing. The employee asked a coworker to stabilize the swinging pump. When he touched it, he stated he received a shock. The employee then exited the forklift and touched the pump, receiving a severe electrical shock.",1
"An employee was putting air in a tire when it exploded off its rim and struck the employee, causing blunt force trauma.",1
"An employee was mixing caustic soda in a mixing barrel when it reacted and splashed on him, causing chemical burns to his right and left wrists, left bicep, and both knees.",1
"An employee tripped on a curb in the parking lot and fell, fracturing his hip.",1
"An employee was fixing an overhead door that was stuck when his left hand became caught in the gears, amputating the first section of his little, ring, and middle fingers.",0
"An employee was on an A-frame ladder receiving floor trusses from a coworker when he slipped and fell off the ladder. He had nails in his pocket and they fell to the ground. The right side of his head landed on the nails and was punctured, requiring hospitalization.",1
An employee was cleaning a mill machine when its rotating cutter stack cut his right thumbnail and his right index and middle fingers. The machine was not locked or tagged out at the time.,1
"An employee was using a hoist and two hooks to lift an axle onto a stand when the axle shifted and contacted the employee's right little finger, partially amputating it.",1
"An employee was moving bee boxes when she suffered from heat-related illness, requiring hospitalization.",1
"On 08/03/17, an employee was driving on a delivery route when he became ill due to dehydration, suffering lightheadedness and cramping. He was hospitalized for heat exhaustion.",1
"An employee was operating a wire shelf welding machine when the machine dropped a crossbar in a crooked position. As he was attempting to correct the crossbar's placement, a press mechanism inside the machine came down on his left middle finger, amputating it from the fingertip to the first knuckle.",1
A temporary employee was tracking a conveyor belt in the process of its installation when his wrench slipped. His right index finger was then caught and amputated between the conveyor and the pulley. The conveyor was not locked/tagged out at the time.,0
An employee was working with a mechanic to repair a nut processing machine when the machine was energized. The machine amputated the employee's right index fingertip.,0
"An employee was standing on a platform sorting chips from a cardboard box into a sorting machine. He slipped on the cardboard, which was sitting on the platform floor, and fell 3 feet off the platform, fracturing his left elbow.",1
An employee was struck by the top of a falling tree and sustained serious injuries.,1
An employee was hospitalized after suffering a finger injury.,1
"On August 8, 2017, an employee was troubleshooting a malfunctioning palletizer when it cycled, catching and amputating his left ring fingertip between a pallet and the palletizer.",0
An employee broke his wrist when his truck struck a protective barricade surrounding a ground power unit. The employee's hand was caught by the steering wheel which spun upon impact and broke his wrist.,1
"An employee fell off a horse while riding it, injuring his back and suffering paralysis.",1
"An employee was standing next to two coworkers who were removing a shipping brace from a core and coil when the shipping brace slipped out of a coworker's hand and hit the employee in back of the head. The employee suffered a laceration and skull fracture, requiring hospitalization.",1
"On August 4, 2017, at about 10:30 a.m., an employee was operating a forklift while pulling products from shelves. When the employee was stepping off the lift, it accelerated, causing her foot to become stuck between a rack and the lift. She suffered a fractured foot.",1
"An employee was loading a drum roller onto a truck when the roller fell off the side of the truck. When the roller fell, the employee was launched out of the truck seat. He landed on his right shoulder and neck, suffering C7 neck fractures and two broken ribs. He was hospitalized and had surgery.",1
"An employee was preparing an inflatable boat for training. He attached an air tank to the boat floor using quick-connect attachments. A rescue board was secured inside the boat. When he turned on the air tank, over-pressurization caused the floor of the boat to rupture and the rescue board to push up and shove him into the air. One of the hose attachments then separated from the floor and struck his chin. He suffered a compression fracture to his left ankle requiring surgery and a chin laceration requiring stitches.",1
An employee was clearing a jam on a slat press when the press amputated the employee's right index and middle fingers.,1
An employee was shocked by electricity and fell from a ladder.,1
"An employee was guiding a load of steel bars when his fingers were caught between the bars, crushing and partially amputating his left ring finger.",0
"An employee was operating an electric paddle mixer when the employee's finger's became caught in the moving parts. The right pinky fingertip was amputated, while the ring and middle fingers were smashed.",0
"An employee was using an overhead hoist to lift a trailer axle with a strap when the strap broke. The axle then fell on and crushed his left hand, requiring hospitalization and surgery.",1
"An employee tripped while going downstairs and fell on the cement floor, breaking a shoulder blade and injuring his head. He was hospitalized for surgery.",1
An employee was attempting to fix an ingredient jam in a mixer when the mixing blades amputated his right index fingertip.,0
"An employee was using a power washing tool when it sprayed hot pressurized water on his legs, causing second degree burns to his outer left ankle. He was hospitalized.",1
"An employee was using a floor mixer with a blade attachment when the blade popped out and the machine quit running. The employee put the blade back in place and the machine engaged. The employee's left hand was caught by the blade, possibly amputating a finger.",0
An employee was preparing to clean a press machine and had raised the access door when the door fell and amputated the employee's right index and middle fingers. The press machine was not locked/tagged out at the time.,0
"An employee slipped and fell from a ladder while stocking products in a cooler, suffering serious leg injuries.",1
"An employee was grit blasting the exterior of a sulfur tank when he lost his grip on the blast nozzle. The hose swung freely, and the blast media was injected into his upper thigh.",1
An employee was hooking up a set of trailers when his left thumb was pinched and severely lacerated by the pintle hook.,1
"An employee was waiting on a forklift for another forklift driver to move out of the picking area so he could pull items for an order. When the forklift driver turned, the pallet it was carrying struck and broke the employee's ankle, requiring hospitalization.",1
An employee was operating a pallet jack when she ran into a rack/shelving unit. Her left foot was fractured upon impact.,1
"An employee was using a press brake to press two pieces of metal together when one piece slipped. As he leaned forward to retrieve the piece of metal, the press brake activated and partially amputated his thumb.",0
A fork truck rolled over an employee's foot.,1
"An employee was standing on a flatbed trailer, guiding a crane hook to move A-frames on the trailer. As the crane operator moved the hook upwards away from the A-frame, the hook became detached from the line. The hook assembly then fell from a height of approximately 12 feet, first hitting the steel A-frame, then hitting the employee on the back right side. He was knocked down onto the trailer, suffering a back injury and broken ribs and requiring hospitalization.",1
"An employee was drilling holes in an 8' by 2' piece of steel when his glove made contact with the spinning drill bit and his hand was pulled into it, amputating his third, fourth, and fifth digits.",1
An employee was using a deli meat slicer to cut pepperoni when the slicer amputated the employee's left ring finger at the first knuckle and lacerated the left hand.,0
"An employee was stepping out of a semi-truck when he slipped on a wet step and struck the ground, straining his right knee and spraining his left wrist.",1
"While servicing a water heater, an employee suffered burns to the hands and face.",1
An employee was unplugging beans from the squeezer at a waste pit. The employee put a 2x4 through an access window to break up the bridged beans. The 2x4 caught on the auger and slammed up against the waste pit chute. The employee's left ring fingertip was then pinched and amputated between the 2x4 and the waste pit chute.,0
An employee was repairing a flat tire when it came off its rim and struck the employee. The employee suffered a broken rib and was hospitalized.,1
"An employee was clearing jammed product from a guillotine cutter when it contacted his finger, amputating the first digit of his right ring finger.",0
"An employee was climbing into a service truck while a coworker was moving an excavator into the parking area. The excavator boom struck the service truck door, which closed on the employee and broke his left leg.",1
An employee was attempting to remove a lettuce core from a conveyor when her glove and then left forearm was caught between the conveyor and a roller. She broke her forearm and required hospitalization.,1
Two employees were lifting an impression roll with a hydraulic lift cart when the roll fell off the cart and struck one of the employee's in the right leg. The employee's leg broke in the shin area and required hospitalization.,1
An employee was cutting chicken with a cleaver when it cut his left middle finger to the bone.,1
An employee was checking his trailer when he slipped on the trailer's bottom step and broke his ankle.,1
"An employee was operating a powered industrial truck when his left foot was caught between the vehicle and an upright, causing lacerations and fractures to his left foot.",1
"An employee was removing a skylight from a roof when the wood truss supporting the skylight collapsed. The employee fell 20 to 30 feet through the opening and landed on the plywood that was covering the pool below, suffering a back fracture.",1
An employee was tightening a bolt with a rotating bolt fastener when the employee's glove became caught in the gap between the sleeve and socket extension. The fastener then amputated the left-hand ring finger.,0
"An employee's foot became caught in some banding while stepping off a forklift, causing the employee to fall to the floor and break a femur.",1
"On August 7, 2017, at approximately 2:30PM, employees were coming down from the roof for a break. An employee unhooked the harness of their personal fall arrest equipment to come down the ladder, lost footing and fell approximately 24 feet to the ground below. The employee suffered a broken femur, broken wrist, punctured lung, and a fractured hip.",1
An employee was moving a plant container when a copperhead snake bit his left index finger.,1
"An employee was pulling electrical conductors when a conductor that was under tension struck the employee's left eye, causing tissue damage.",1
An employee was attempting to remove a pin from a derrick when a forklift operator moved the derrick board unexpectedly. The employee's right thumb was then caught and amputated between the pin and the handrail.,0
"An employee was delivering mail to a business, tripped over a wooden walkway separator and fell striking a concrete planter and breaking several ribs.",1
"Two employees conducting maintenance had just installed a new case belt and were working to make sure the belt was tracking correctly. The injured employee's left hand was caught between the belt and the end-roller, partially amputating his ring fingertip.",0
"On August 7, 2017, at 5:45 PM, an employee and a coworker were arguing when the coworker stabbed the employee in the face and back with a knife or sharp object.",1
"An employee lost consciousness while cleaning a small cut on their finger at the sink. The employee fell to the floor, suffering a head injury, skull fracture, and brain hemorrhage.",1
"An employee slipped and fell on a wet floor, suffering a severe back strain and pain.",1
"An employee fell approximately 7 feet off a wall after climbing a ladder, hitting the ground and suffering a head injury.",1
An employee helped a coworker clear a jam on a stacker. The employee's hand was still on the equipment when it was restarted and his left thumb was partially amputated.,0
"An employee was moving a box of pillows when he tripped over a piece of tape that was hanging off the box. He fell to the floor, fracturing three ribs and spraining his left shoulder and neck.",1
"An employee was holding a board that was being cut in half with a circular saw when the saw jumped and swung backwards, hitting and cutting the employee's right thumb. The employee had surgery.",1
"An employee was attempting to pick up a pallet when his foot became caught and he fell to the ground, breaking his right femur.",1
An employee was trying to remove a small piece of plastic near an extrusion die when his hand was caught and crushed between the die and the adjacent rollers.,1
"An employee came to pick up a stack of recycled cardboard bales from a customer when the top bale fell and struck the employee, who suffered a fractured hip and fractured L1 vertebra.",1
"An employee tripped over the leg of a clothing rack and fell, fracturing a shoulder.",1
"An employee had been removing concrete forms from columns. The employee stepped onto a piece of plywood, which gave way, and fell 14 feet to the ground below. He fractured his lower back.",1
"An employee was sandblasting steel above his head. While he was adjusting his hand position on the nozzle, it slipped out of his hand. When he tried to catch the nozzle, it blasted his arm above the elbow, lacerating his arm and a vein.",1
An employee was using a straight-line rip saw to shave wood when a 9-inch piece of wood impaled his right-side lower body.,1
An employee was checking the air brakes on the tractor trailer when it backed into the employee resulting in fractured ribs.,1
"An employee ran outside to confront a customer stealing a generator and was struck by the customer's car door. The employee fell and the employee's head struck the asphalt, requiring hospitalization.",1
An employee was moving equipment and helping to load pipe when his thumb was caught and amputated between a generator and a piece of steel square tubing.,0
"An employee was caught between a stack of lumber and a chain guard, injuring the internal left pelvic area. The employee was hospitalized and had surgery.",1
"An employee was climbing a fixed ladder to access the HVAC system on a roof when the ladder came off the building. He fell approximately 10 feet to the ground, fracturing his legs.",1
"An employee's right index finger was caught in a door jamb when the door closed, amputating the fingertip.",0
"An employee was clearing plastic from the flow head of a blow molder wheel when he contacted a 220-volt circuit, suffering an electrical shock and an abrasion above the wrist. He was hospitalized.",1
"An employee was standing on a dock plate that was 41 inches off the ground, preparing to load a truck trailer. As he was raising the trailer door, the truck pulled away, causing him to lose his balance and fall off the dock plate. He fractured his tibia.",1
An employee was riding in a cage on a forklift when the cage tipped off the forks. The employee's left middle finger was caught and partially amputated in the cage's metal platform.,0
"An employee was standing on a footstool to remove a grating guard from underneath an overhead conveyor. He lost his balance while removing a cotter pin from the grating, and his right index fingertip was caught and amputated between the pin and grating.",0
"An employee was driving and collecting recycling waste when he fell out of the driver cabin, hit the ground, and lost consciousness.",1
"An employee was trying to move a cart with granite on it when the cart and granite overturned and struck the employee, injuring his neck and breaking the vertebrae in his lower back.",1
"An employee was pulling a pin that holds the lip of the truck to the dock. The dock plate fell and caught his left thumb, crushing it.",1
"An employee's left index finger was caught and crushed between an elevating latch and a pipe stump on a drilling rig, requiring amputation.",0
"An employee was operating a notching machine when the employee's hand became caught in the machine, resulting in amputation of fingers.",1
"An employee was washing surgical instruments in the decontamination room. She turned to take the instruments to the other sink, slipped and fell, sustaining a dislocation and a fractured humerus.",1
"An employee fell 13.5 feet to the ground while connecting steel beams in a storm shelter, suffering a broken left arm and concussion.",1
An employee was helping to form concrete when he became hot and passed out. He was hospitalized for dehydration.,1
An employee was operating a forklift when he lost control of the equipment. His foot was caught and crushed between the forklift and a steel pole.,1
"On August 8, 2017, at approximately 2:50 p.m., an employee tripped on a pallet inside the trailer of a delivery truck. As he fell, he reached for the rope that pulls the door down and his left hand became entangled in the rope. The injury resulted in a left ring fingertip amputation.",0
An employee was on an A-frame ladder stocking a top rack when the employee fell to the ground. The employee suffered a concussion.,1
"An employee was stabilizing a tug boat that was being lifted by a crane. When the crane operator lifted the tug boat, it shifted and struck the employee. He was caught between the tug and the crane's concrete base, crushing his right leg.",1
"An employee was installing an outrigger on a frac unit. The employee climbed a ladder to install the top pivot pin while a loader was positioning the outrigger. The top pin would not fully slide into place because the bottom pin's eye was not aligned properly. The employee dismounted the ladder and pushed the lower part of the outrigger to align the pins and eyes with the mount. When the employee placed the lower pin into the eyes, the top pin fell through the eyes and struck the employee's right hand, smashing the index and middle fingers.",1
"An employee was operating a chain conveyor, moving slabs to be cut. The employee's left index finger was pinned in the drive pocket of the chain, pulling all the flesh off the finger.",1
"An employee exited a fork truck to stack boxes of cereal on a pallet when the fork truck pinned him, injuring his right hand, arm, leg, and foot.",1
"On August 8, 2017, around 4:30 p.m., an employee was helping a forklift operator load 18,000 lbs. of galvanized pipe into the back of a flatbed trailer. The injured employee was holding a trailer stake and when the forklift operator lowered the load onto the truck, the employee's hand with the stake drifted under the trailer. The trailer came down and crushed his hand between it and the stake. He suffered a fracture to his left ring finger metacarpal and was hospitalized.",1
"An employee was connecting coaxial cable when he was stung by a bee or wasp. Later that evening, after his shift, he began experiencing an allergic reaction and was hospitalized.",1
An employee was operating a pallet jack and veered into some pallets. The employee was hospitalized for leg fractures.,1
"While walking into the store, an employee tripped over a door mat and fell, breaking her femur.",1
An employee was changing heat paper when the employee's finger got caught in a clamp that holds the heat paper. The employee's right ring fingertip was amputated.,0
"An employee was hooking up a trailer onto a truck at the job site. When the truck driver moved the truck, the trailer fell on his right foot. He suffered foot and toe lacerations that required hospitalization.",1
An employee was rolling a roll of liner so he could lift it using a forklift. The roll slipped off the carrier and injured the employee's lower left leg.,1
"While making an adjustment to a pouch manufacturing machine, an employee had his left thumb pinched by the machine's cutting blades resulting in partial amputation of the thumb. At the time the interlocked door had been bypassed.",1
"An employee was clearing a film jam on a meat packaging machine when his left hand was crushed between moving parts, fracturing the two middle fingers.",1
"An employee was disconnecting a hose from a pressurized railcar tanker when sulfuric acid sprayed from the tanker's attachment tube up the sleeves of the chemical jacket he was wearing. He suffered chemical burns to the arms and upper body, requiring hospitalization.",1
"An employee was helping a concrete pump operator with a concrete system. He was trying to pick up a 4'' clamp that was wedged under the concrete pipeline when it surged, smashing his right middle finger and amputating the fingertip.",1
"An employee was pushing a four-wheeled container in the rear cargo compartment of a truck toward a loading dock and over metal dock plates when he slipped and fell off the dock plate, injuring his right hand.",1
"An employee was entering a portable water tank to erect a scaffold when he fell through a hole in the platform about 10 to 15 feet to the tank's floor. He suffered a broken left leg, back injuries, and two head lacerations, requiring hospitalization.",1
"An employee was inspecting counter weight cylinders for clearance when the employee fell from the top of the counter weights to the crane deck, suffering a facial fracture.",1
"An employee was trimming a tree canopy using a polecat aerial that was parked in a median. The traffic lane underneath was not active, but at some point the polecat overturned in the roadway. The employee hit the pavement and the aerial basket, breaking his femur, dislocating his shoulder, losing two teeth, and lacerating his chin.",1
"An employee had been prepping concrete forms for removal and was on top of one of the forms. While moving from one anchor point to another, the employee fell off the form. His self-retracting lanyard failed and he fell to the concrete, 16 to 18 feet below, sustaining injuries to his head, hip and wrist.",1
"An employee was working underneath a truck checking the wiring when a coworker got into the truck and drove away. The employee was dragged 2 feet, suffering injuries that required hospitalization.",1
"An employee had dismounted a vehicle when it began to roll. As he was chasing his work vehicle, he was crushed between his vehicle and another vehicle, injuring his torso.",1
"While an employee was checking the cam on a PLC machine, the machine indexed and caught the employee's right hand between the spring platform and the lock cylinder, resulting in a laceration. The machine was not locked out or tagged out at the time.",1
An employee was involved in a golf cart accident resulting in a broken ankle.,1
"On August 8, 2017, an employee was unloading feed from a truck to bins when an auger arm exiting the truck became bogged down. As he went to open or close the door of the auger, his left hand was caught in the auger, amputating his index, middle, and ring fingers and crushing his pinky finger.",1
"An employee was putting product on the shelves of a produce cooler vault when he fell from a step ladder, fracturing his left hip.",1
An employee was cleaning an energized rotary valve when it amputated the employee's right index finger at the second joint. The valve was not locked out at the time.,0
"An employee was lowering the leg of a demountable box when the leg fell down and caught his right index finger in a pinch point, amputating the fingertip.",0
"An employee fell from a flatbed trailer to the ground while securing a load, suffering five broken ribs, a broken clavicle, broken scapula, broken shoulder blade, punctured lung, and slight concussion.",1
An employee was operating an up-cut saw when it amputated three of his right-hand fingers.,0
An employee was removing product from a hopper to prevent a jam when one of his left-hand fingers was pinched between the hopper's conveyor belt and guard.,1
"Employees were using a fork truck to move a fertilizer hopper when the hopper fell on one of the employees, resulting in a crushed pelvis and ribs.",1
An employee was using a wooden post to remove a roll of paper from a press when his right index fingertip was caught and amputated between the post and a roll shaft.,0
"On August 8, 2017, an employee was operating a tugger vehicle when the employee's left foot was caught and fractured between a post and the cart.",1
A temporary employee was using a manually operated hoist to move a 600-pound metal coil when the coil fell and landed on his foot. He sustained a fractured left foot and was hospitalized.,1
"While standing behind a register, an employee tripped over a fan cord and fell to the floor fracturing the right leg.",1
"An employee was taking a motor off a stand. When the bolts were loosened, the motor fell on the employee's knee and then left hand, crushing it between the motor and concrete. The employee's left middle fingertip was amputated.",0
An employee was pulling a blast pot with the assistance of another employee when he tripped and dropped the pot on his hand. His thumb and index finger were caught and partially amputated under the pot handle.,1
"An employee fell off a ladder while performing ceiling maintenance, suffering rib, skull, and spinal injuries.",1
An employee was operating a lathe when the chuck of the lathe turned unexpectedly and forced the employee's hand against an edge on the tool holder. The employee's left pinky fingertip was amputated.,1
An employee was attempting to grease a conveyor when the employee's right thumb tip was caught and amputated between the conveyor chain and sprocket.,0
"An employee was using a dolly to unload a vending machine from a truck to the loading dock when the dolly wheels became lodged, tipping the vending machine over and onto the employee. He broke his right shin.",1
"An employee was walking by a freezer case when he tripped and fell over the guard, fracturing his left femur.",1
"An employee was cleaning a concrete mixer with a hose when his right hand was caught between the mixer's paddles and the mixer's drums, fracturing his right middle and index fingers. He was hospitalized. The mixer was unguarded and energized at the time.",1
"An employee was cleaning out a peat auger when his right hand contacted the spinning auger blade, lacerating his index finger and requiring surgery. The auger was not locked out at the time.",1
"On August 9, 2017, at approximately 2:50 PM, an employee was operating a jib hoist to lift a rail component (350 lbs.) when his left index finger was pinched between the hoist rigging and the rail. His left index fingertip was amputated.",0
"An employee slipped and fell to the same level on an anti-fatigue, 12 X 12, piece-together mat, breaking the right wrist and requiring surgery and hospitalization.",1
"An employee was grabbing his framing gun when it shot a nail into his leg, requiring surgery and hospitalization.",1
An employee was in a bucket working on a primary electrical distribution powerline when he became disoriented and suffered heat exhaustion.,1
An employee fell from an exchanger rig as he descended. The employee fell onto a basket made of angle iron and fractured ribs and bruised a lung.,1
An employee was welding an H-beam and was putting an electrode on the holder when he was electrically shocked by the circuit. He momentarily lost consciousness and fell over. He was hospitalized.,1
"An employee was working with a four man crew to remove and replace rotted electrical poles outside. He had been digging, tamping, pushing, pulling, and setting poles when he became ill and slouched over. He was hospitalized for multiple heat-related illnesses.",1
"While operating a PIV, an employee struck racking and was pinned between the racking and the PIV, suffering contusions and a lacerated liver.",1
An employee was setting a steel beam while working out of an aerial lift when the beam leaned against the lift and pinched his left hand between it and the top rail of the man basket. His middle finger was amputated to the first knuckle.,0
An employee was operating a forklift to move freight when he passed out and hit his face on the dock floor.,1
"On August 9, 2017, an employee was looking through the end frame of a large, powered forging press when it cycled. The die then came down and struck his head and face, causing serious injuries.",1
"Two employees were on eight foot ladders aligning connectors when the beam rolled, knocking them off the ladders. An employee suffered a torn left leg.",0
"On August 9, 2017, an employee was driving an electric pallet jack when she became lightheaded and fainted. She fell from the pallet jack and broke her fibula, requiring hospitalization.",1
"An employee was removing coating buildup from ink rollers when his hand was pulled into the rollers, lacerating it and crushing his fingers.",1
An employee was lifting a bucket of bolts when he strained his back.,1
"An employee was adjusting a loose wing nut on a conveyor system rail when the employee's left hand entered a gap between the conveyor and a transfer plate. As the employee pulled the hand out, the left index fingertip was amputated.",0
"An employee was unjamming a composite board from a cut-off machine when it engaged and came down on his right hand, fracturing and severely lacerating his index, middle, and ring fingers. The machine was guarded at the time.",1
An employee was lifting a trailer door when the door broke and came down on his head and pinned his body underneath it. He fractured his neck.,1
An employee and a coworker were standing on 10-foot ladders while removing an old air duct when a segment of the duct separated and struck the ladders. The employee fell to the ground and broke ribs on the right side.,1
"An employee cut a piece of wood with a table saw. When he reached to move the piece of wood, the saw blade cut his left hand beneath the fourth and fifth knuckle. The saw was running and unguarded at the time.",1
"An employee was standing on top of a 54-inch reinforced concrete pipe when he slipped and fell to the ground, landing on his left side and lacerating his spleen.",1
"An employee was monitoring packages being filled on a vertical form fill machine when the machine jammed. While she was trying remove the jam, the blades closed on her left hand. She suffered third degree burns and contusions on her left hand and fingers.",1
An employee was moving a mobile home wall that was on rollers when he was pinned between the mobile home wall and a dock. He suffered pelvic injuries that required hospitalization.,1
An employee was removing a plastic wrap jam from a packaging machine when the guillotine blade came down and amputated the employee's left index fingertip. The machine was not guarded or locked/tagged out at the time of the incident.,1
An employee suffered a fingertip amputation while repairing isolated machinery.,0
"An employee was sitting at her desk. When she stood up, her feet became tangled in some cords beneath her desk and she fell to the floor on her left shoulder. She suffered a fractured left femur and fractured left humeral head, requiring hospitalization.",1
"A temporary employee was mowing around a curb at a jobsite when the self-propelled mower he was operating slipped and ran over his foot, amputating his left big toe.",0
"An employee was lowering a truck after jacking it up to perform an alignment procedure. He placed his right hand between the shock bracket and leaf spring of the truck. When he began to lower the truck, it came down too fast and pinched his finger between the shock bracket and leaf spring. His right index fingertip was amputated.",0
"An employee was cleaning the shaft of a mixer with a solvent soaked rag and reached over to turn down the speed of the mixer. The rag on his hand wrapped around the rotating shaft, pulling on his left middle finger and amputating it at the second knuckle.",1
"An employee was welding on a jig when a side screen fell on his left hand, amputating his thumb.",0
"An employee was sorting concrete on a conveyor line when a piece of concrete moved and struck his right hand, fracturing his ring and pinky fingers.",1
"An employee was removing a plug from a 6-inch pipeline when pressure in the line caused it to blow off and strike his hand and arm, requiring surgery.",1
An employee's right index finger was amputated while lifting a transmission jack out of the rear of a company vehicle.,0
An employee was unloading operating room supplies when she opened a box that had leaked formalin inside. She experienced respiratory issues and was hospitalized.,1
An employee was carrying a chemical (Thermastic) in a bucket when the employee lost balance and chemical spilled on his hands and forearms resulting in chemical burns.,1
"An employee was adjusting a cable roller used to pull a nylon rope through a conduit when the nylon rope lost tension and came loose, striking and amputating the employee's right thumb to the first knuckle.",0
"An employee climbed a 12-foot A-frame ladder to push concrete blocks that had shifted from the top of the loading dock retaining wall back into a straight line. A section of block fell off the wall and hit the ladder, causing the employee to fall 8 to 10 feet. His left ankle was caught on one of the rungs and he used his left hand to brace his fall. He broke his left ankle and left wrist and was hospitalized.",1
"On August 9, 2017, an employee received an electrical shock while installing new ovens and suffered cardiac arrest which resulted in an inpatient hospitalization and medical treatment beyond first aid.",1
"While clearing land, an employee unearthed a bee hive. The bees stung the employee over 100 times in the face.",1
"An employee was removing furnace parts when he fell backwards, hitting his head on the concrete floor.",1
"An employee was on an extension ladder scraping loose paint on the side of a building when the ladder slid down. The employee fell about 6 feet to the asphalt pavement, and the ladder landed on top of his left leg, breaking his femur.",1
An employee was operating a ride-on pallet jack in the standing position when he lost his balance and his left foot slipped off the vehicle platform. His foot was then crushed between the pallet jack and a storage rack.,1
An employee collapsed and was hospitalized for suspected heat stress/exhaustion.,1
"An employee tripped and fell while walking on the sidewalk, suffering a hip fracture.",1
"An employee was using a high-pressure water jetter to clean out a piece of large pipe when the equipment turned around on its own and high-pressure water hit the employee's left arm, lacerating it.",1
An employee was climbing an 18-foot fixed ladder when he slipped and fell to the ground.,1
An employee was inspecting a paint job on the roof of an amusement ride. He slipped as he was stepping off a ladder and fractured his right heel.,1
"An employee was attempting to remove a kink in a chain being used to pull out a stuck truck when the chain unkinked and struck the employee's left hand, amputating the pinky finger.",0
"An employee was on a scaffold removing shoring from a concrete form when the shoring slipped out of the employee's hands and struck the scaffold planking. He then fell approximately 8 feet, suffering head lacerations that required stitches. He was hospitalized overnight.",1
"On August 10, 2017, an employee was on a feed conveyor clearing material from an overhead conveyor when the employee's left ring and middle fingers contacted the chain and sprocket. The employee's fingers had to be surgically amputated. The overhead conveyor was unguarded at the time.",0
"An employee was waiting for a work truck when the work truck placed an outrigger down on his right foot, crushing and fracturing the fourth and fifth toes.",1
"An employee was holding a pullet while a coworker performed a vaccination when the employee was accidentally stuck in the right index finger behind the first knuckle with a quarter-inch, 18-gauge needle that was being used to administer the vaccine.",1
An employee bumped his head and suffered a brain hemorrhage while replacing lights/ballasts.,1
"An employee was helping coworkers remove a dumpster to the trash compactor room when the employee was pinned between the dumpster bar latch and a wall in the trash compactor room, suffering a chest injury that required hospitalization.",1
"An employee was reassembling food processing equipment after cleaning it. As the employee was positioning the auger screw in the auger screw housing, a coworker pushed the end of the auger screw into the housing, causing the employee's right hand to be pinned between the auger screw and the auger housing. The employee's index and middle fingertips were amputated.",0
"A temporary employee was operating a powered industrial truck and struck a rack. The employee's right foot was pinned between the powered industrial truck and the rack, breaking and lacerating the right ankle/foot.",1
"On 8/9/2017, at approximately 4:00 p.m., an employee had been operating a furnace when he experienced dizziness and finger numbness. He was hospitalized for heat stress and muscle damage.",1
"On August 10, 2017, an employee was taking fall protection system anchors to the roof while using a ladder when the employee either fell from the ladder while placing the anchors onto the perimeter wall or while accessing the roof. The employee fell more than 20 feet to the ground and suffered a head injury, requiring hospitalization.",1
"An employee was using a hammer to scrape concrete off a mud belt on a moving conveyor. When the hammer contacted the conveyor belt, it struck his hand and injured his right thumb.",1
"An employee was struck by a reversing forklift, fracturing his left ankle.",1
An employee was operating a 400-ton press when his right hand became caught in the press die. His index and middle fingers had to be surgically amputated.,0
An employee fell approximately 8 feet off a sidewalk shed and was hospitalized with a sprained wrist and hip injuries.,1
An employee was using a circular saw to cut a 2X4 when the blade amputated his middle fingertip.,0
"An employee was moving a bin of linen when his right hand was caught between the bin and a steel table, crushing his ring finger.",0
"An employee was standing inside a tractor trailer waiting for the dock plate to connect to the trailer when the dock plate came down on his right foot, lacerating it. He was hospitalized.",1
An employee working on a carport fell through a damaged section of decking and was hospitalized with a broken kneecap and shoulder.,1
"An employee was cutting a propeller blade from a propeller when the propeller gave way. The employee was then caught between the propeller blades, suffering a broken pelvis, ruptured colon and bladder, and internal bleeding.",1
"An employee was moving empty pallets in his trailer. When he stepped onto the liftgate on the back of the trailer, he slipped and fell to the ground. He fractured his collarbone and two ribs and punctured a lung, requiring hospitalization.",1
"On August 10, 2017, an employee was loading a paper roll into a machine when the employee's left fingertip was caught and amputated in the roll clamp.",0
"An employee was working in an enclosed refrigerated warehouse when a propane-fueled forklift was brought in to move some boxes. The employee was exposed to carbon monoxide from the forklift, suffering nausea and a headache. He was hospitalized.",1
An employee was removing intestines from chickens on a shackle line when her right thumb become lodged and amputated in a shackle.,1
"An employee was operating an earth magnet when it was deactivated, creating a pinch point that amputated his right index fingertip. The magnet did not have a safety pin at the time.",0
An employee was walking up the stairs due to the elevator being out of service and suffered chest pains.,1
"An employee was unloading a truck tank when he was exposed to hydrogen sulfide, suffering a headache and nausea.",1
An employee was operating a hammer machine when she inadvertently activated the foot pedal while her left index finger was in the point of operation. She suffered a left index fingertip amputation.,0
"On 8/11/2017, an employee was in training and performing exercises when he suffered a muscle strain and was hospitalized.",1
"An employee lost footing while exiting a truck and fell to the ground, breaking ribs and vertebrae and suffering a possible head injury.",1
An employee was cut on the right middle finger knuckle while unloading stainless steel.,1
"An employee was on a stock picker platform picking boxes off a pallet on a rack when the employee fell approximately 6 feet to the ground, suffering a head laceration and a partially severed ear.",1
"An employee was installing a 6-inch PVC sewer line. As he was holding the pipe, something smashed his thumb against the pipe. He suffered left thumb trauma and a possible fracture, requiring overnight hospitalization.",1
An employee was fixing a chain that was slipping on a unit when a finger on the right hand was caught between the chain and the gear when the machine was activated resulting in a fingertip amputation.,0
An employee was loading equipment onto a trailer when the employee's thumb was pinched and lacerated between the equipment's roller and articulating plate.,1
"An employee was standing on an extension ladder while affixing flashing around a door frame. When the employee attempted to drill into the flashing, the ladder slid and one of the rungs came down on top of the employee's right knee, injuring it and requiring surgery.",1
An employee was taking a scrap piece of foam off a bailer saw and amputated the right ring fingertip. The saw was running at the time of the incident.,0
"An employee was setting up two pieces of a riser platform when one of the pieces got on top of the other. As he tried to lift up one of the pieces, his right middle finger was caught between the other riser piece, amputating his fingertip.",1
An employee was using a press brake to make a part out of a piece of sheet metal that was approximately 2'' in length. He was setting the sheet metal when the press brake crushed his ring finger. Part of his finger had to be surgically amputated.,1
"An employee was servicing an oil rig when a rod transfer became hung up, came loose, and struck the employee, knocking him out of a rod basket. He landed face first on a tubing board and broke his leg, jaw, nose, and other facial bones.",1
An employee was running a machine that forms meat patties when the machine amputated the employee's left index fingertip.,0
"An employee was attempting to move cows between two pens when a cow kicked her in the lower leg, causing a compound fracture.",1
"An employee was fixing an overhead crane. His right hand was on the crane's trolley rail when the crane operator jogged the trolley, pinching and amputating his small right finger between the wheel and the trolley rail.",0
An employee fell in the parking lot and broke her femur.,1
"On August 11, 2017, an employee was servicing a lawnmower when his middle fingertip contacted the rotating blade and was partially amputated.",0
"An employee was changing out a blade on a handsaw when the blade lacerated the palm of his left hand, requiring surgery. The handsaw was not operating at the time.",1
An employee was troubleshooting a dock plate that was not working properly when his hand was caught and crushed in a hydraulic mechanism.,1
An employee was onboard a 30-foot vessel and was repairing the gill net retriever assembly because the teeth would not fully close. Part of the employee's left hand was caught in the retriever which crushed tendons and nerves.,1
An employee was working on a finishing machine when the stop bar sensor turned on and the press continued its operation. The press cycled and the employee's right hand was pulled and crushed in between the notches on the stop cylinder and the stop bar. The employee was hospitalized.,1
An employee suffered a right index fingertip amputation while cleaning a molding machine.,0
"An employee was preparing two splice plates for connection to a beam when the bottom splice plate fell open and onto a J-hook. His left-hand fingertips were pinched and fractured between the edge of the J-hook and the concrete bridge deck, and his left thumb was dislocated.",1
"On August 11, 2017, an employee was changing the filter on a high-pressure die cast furnace when the employee's leg slipped off the edge and contacted molten aluminum. The employee's pant leg ignited, and the employee suffered burns to the right foot and lower leg.",1
An employee was cleaning asphalt from a silo door when his legs became caught in a rotating conveyor. Both legs were amputated.,1
"While cutting plastic on a table saw, an employee got his hand caught in the saw and sustained a partial amputation to the right middle finger.",0
"An employee was attempting to put a gauze muzzle on a dog when the dog bit and lacerated the employee's right thumb, requiring hospitalization.",1
"Employees were moving a soda vending machine with a pallet jack. The vending machine became unstable. An employee attempted to stabilize the vending machine at the bottom. The vending machine slid off the pallet jack, crushing the employee's left second digit and amputating the fingertip.",1
An employee fell approximately 8 feet from an A-frame ladder to the ground while removing a DDC controller from a ceiling.,1
"An employee was securing his positioning straps to the ladder and fell about 15 feet to the ground, fracturing the left wrist.",1
An employee was attacked and bitten by two dogs while visiting a member's residence.,1
"While standing on the toolbox in the back of a pickup truck, an employee bent over to give a pair of safety glasses to a coworker. He lost his balance and fell onto the concrete floor, suffering 11 broken ribs, two fractures under the right eye, and a brain hemorrhage.",1
"On August 11, 2017, an employee was doing maintenance on a yard truck. While exiting the truck cab, the employee slipped and fell to the ground, breaking the right leg.",1
"On August 11, 2017, at 11:00 a.m., an employee was changing out a residential electrical meter. He performed a line-to-line voltage check and then proceeded with the change-out. When he hooked up the jumper cables, an arc flash occurred, causing second degree burns to his right hand. He was hospitalized.",1
"On 08/11/2017, an employee slipped and fell while working on an escalator, and was hospitalized for treatment of a laceration to the shin.",1
"A customer drove into the detail shop, striking an employee and other vehicles. The employee sustained a broken lower right leg.",1
"An employee was walking from one forklift to another. As the employee was stepping onto the second forklift, the first forklift rolled and struck the employee's leg, shattering the left foot and ankle.",1
"An employee was using a pry bar to pry form work when his right pinky finger was crushed between the pry bar and the form work. His fingertip fractured and he lost the fingernail, requiring surgery and hospitalization.",1
An employee was using a band saw to cut a manufactured plastic part (42-gallon waste container) to be ground up in a granulator when the saw blade and the part wiggled. The employee's left thumb tip then made contact with the blade and was amputated.,0
"An employee was attempting to mount a forklift that was being operated by a coworker when the forklift knocked the employee to the ground and ran over his right femur, fracturing it.",1
"An employee was cutting a radiator from a semi-truck using a cutting torch when he cut a Freon line. The Freon ignited, causing second and third degree burns to his face.",1
"An employee was walking her mail route when she slipped and fell on wet gravel. She broke her left ankle in three different places, requiring hospitalization.",1
"While working on an eight-foot ladder, an employee fell and sustained two fractured ribs.",1
"On August 11, 2017, at 8:30 a.m., an employee was dismounting a ladder onto a roof when the metal shingle that he stepped on detached and he fell 15 feet to the ground, fracturing his lower lumbar, cervical spine, and three ribs.  He was hospitalized.",1
"On 08/12/2017, an employee felt ill and was hospitalized for dehydration.",1
"An employee was grinding a piece of metal plate to install it on a service truck when the grinding wheel came off and struck the employee's forearm just above the wrist, fracturing the ulna.",1
"An employee had just finished hanging a TV on a wall mount when he fainted, requiring hospitalization for dehydration.",1
An employee was cutting a piece of metal with a shear machine when the machine amputated the employee's thumb tip. The machine was unguarded at the time.,0
"An employee was closing the rollup door of a trailer parked at the loading dock when his third and fourth fingers on his right hand were caught between the door panels, amputating his third fingertip and crushing his fourth fingertip.",1
"On August 08, 2017, at approximately 9:20 a.m., an employee was operating a stand-up forklift in the cold dock when the forklift slid on condensation, causing the employee's left ankle to be caught between the forklift and a guardrail. He suffered a compound fracture of the left ankle and was hospitalized for surgery.",1
"An employee was shutting the sliding door between two rooms when his left hand was caught between the door and the door frame, crushing and amputating his left middle fingertip.",0
"An employee was trying to correct the feed on a label machine. She placed the machine in manual mode to use the jogging button. She was trying to clear the roller when her right hand was caught in the roller, avulsing/crushing the middle and index fingertips.",1
"An employee was walking on the milk parlor floor to attach suction to a dairy cow. Teat dip had spilled on the floor and the employee stepped in it, slipped, and fell back. The employee's head hit the floor, suffering a concussion.",1
An employee was driving a stand-up tugger and trying to throw something in a garbage can when she fell to the concrete floor and suffered a concussion.,1
"An employee was running a pallet destacker when it jammed. He used a pry bar to free it. When it unjammed, his right index finger was caught between the pry bar and the wood pallets, amputating his fingertip without bone loss.",0
"An employee was putting products away when her scooter struck the edge of a sink and tipped over. She put her foot down as the scooter tipped, and her right foot and ankle were fractured, requiring hospitalization.",1
"On August 13, 2017, at 9:30 PM, an employee was trying to help a forklift operator move a load through a stand-alone arc-way when she was struck by the rear reel of the forklift. She suffered a compound fracture to her left leg.",1
"An employee slipped and fell while at work, fracturing her left patella and requiring surgery. She was hospitalized.",1
An employee was shearing galvanized metal in a shear. The employee used a wooden box to set the metal square. The employee's left thumb was then caught and amputated (flesh only) between the box and the shear arm.,0
"An employee was operating a powered industrial truck used to pull carts of packages when she turned hard to the right and fell off the left side of the truck, fracturing her left ankle and requiring surgery.",1
An employee was installing the vertical section of an EMT conduit beside a bucket elevator when a 10-foot joint became uncoupled and fell 60 feet from above. It struck and fractured the employee's right femur.,1
"An employee was sitting on a chair and then fell to the ground, suffering broken arms.",1
An employee was operating a grapple log skidder to move cut trees when it rolled over the side of a hill and partially landed on the side of the turnpike below. He suffered multiple skull fractures and a fractured T3 vertebra.,1
An employee was attempting to remove a piece of cut angle iron from the fixed vice area of a band saw when his right index and middle fingertips were pinched and avulsed in the vice area.,1
"A crew was changing out a single phase pole with a transformer on it. Work on the pole was completed and the cover-up was being removed when an employee noticed the animal guard that was installed on the arrestor was not in its proper place. As he attempted to correct it, he came in contact with energized parts while his elbow contacted a grounded surface. He received second degree electrical burns on his right arm.",1
An employee was clearing a jammed trimmer on a printing press when the machine amputated the employee's left ring and middle fingers.,1
"An employee was working on a ladder that was set up on a roof when his foot became caught on one of the rungs. The ladder then slid out from under him, causing him to fall approximately 8 feet. The ladder fell on top of his leg, fracturing his tibia and displacing tendons.",1
An employee suffered from heat stress while performing lifeguard duties.,1
An employee was operating a bucket lift with a coworker riding along. They were positioning the bucket lift prior to trimming branches off a tree. They were about two feet away from the tree and any powerlines when an arc came through the bucket controllers and burned the employee's hands and chest. He was hospitalized.,1
An employee rolled and fractured his ankle while moving a sign.,1
"On August 14, 2017, at approximately 4:30 PM, an employee was attempting to deliver mail at a residence when she was attacked by the resident's dog. She suffered a serious laceration to the left lower calf, requiring hospitalization.",1
"An employee was going to answer a phone when the employee fell to the floor and suffered a compound fracture, requiring surgery.",1
Four employees were repairing cars in an auto body shop when another temporary employee drove a car into the shop and struck the employees. One employee was hospitalized.,1
An employee was cutting steel bars with a horizontal bandsaw when the blade amputated his right small finger.,0
An employee's left- and right-hand fingers were smashed by metal plates as they were being lowered.,1
"On August 14, 2017, at approximately 7:40 a.m., an employee was a cutting some plants using a cutting shear when the shear amputated her left ring fingertip.",0
"An employee was measuring a keyway for a replacement sprocket when his left hand became tangled in the sprocket, amputating his index, middle, and ring fingers.",0
"An employee was picking up concrete debris and throwing it into a skid steer bucket when the concrete fell out of the bucket and snagged his right ring finger, amputating it.",0
"An employee inhaled hydrogen cyanide while taking readings from machines, losing consciousness and requiring hospitalization.",1
"An employee was making a delivery. He was on an elevated surface pulling on a bungee cord to secure a tarp when the cord snapped, causing him to fall and hit his head. He was hospitalized with a head injury.",1
"A dozer was dragging a flume pipe that came loose and struck an employee in the back. The employee suffered a fractured pelvis and shoulder blade, requiring hospitalization.",1
An employee was climbing down from a 6-foot ladder when he missed the second step and twisted his ankle. He fractured his ankle in three places and had surgery.,1
"An employee fell while installing trusses and hit the ground, fracturing an ankle and injuring a kidney. The employee had surgery.",1
"An employee was cutting a tree on the ground when the tree rolled onto his feet, fracturing both and requiring surgery.",1
"An employee collided with another employee while walking in a hallway and fell to the floor, injuring her head and hip and suffering a brain hemorrhage. She was hospitalized.",1
"An employee fell into an elevator pit, striking concrete and injuring his back.",1
"An employee was cleaning the rollers on a pipe roller machine when his glove was caught between the rollers. His right hand was pulled into the rollers, amputating all four fingertips to the first knuckle.",0
"On August 14, 2017, an employee was doing quality inspections on tires when a tire tipped over and struck the employee's right calf and foot, requiring hospitalization.",1
"An employee was attempting to clear a 4-inch tin pie from a die machine when the machine cycled, amputating the employee's left middle finger from the tip to the first knuckle.",1
"On 8/14/2017, at 11:20 AM, an employee was installing a lateral cover on a mill feed row when it fell on his left foot, fracturing his fourth and fifth toes and lacerating his foot. He was hospitalized and had surgery.",1
An employee was climbing a ladder to assess a leaking roof when he missed a rung with his hand and fell approximately 10 feet to the ground. He suffered a gash to the left side of his head and a fracture to his left elbow.,1
"On August 14, 2017, an employee was removing braces in a shipping container when granite slabs fell onto the employee's chest. The employee suffered broken ribs and a collapsed lung.",1
"A 19-foot box truck drove off the road, over the curb onto the sidewalk and struck an employee. The employee was hospitalized for collapsed lungs, head injuries, lacerations, and fractures which included broken ribs.",1
An employee was operating a water ride and fell into the water striking the boat. The employee was hospitalized with chest pain.,1
"Two employees had shut down a can crusher because the auger was making a funny noise. The injured employee had climbed up to inspect the upper bearing and had set his right foot over to the baler to steady himself. The baler engaged and started down, and the bale ejector chain hook came down on his boot behind the steel toe. His right big toe was amputated.",1
An employee was helping to guide paper through a machine when the employee's right pinky finger was caught and smashed in the sprocket at the entrance to the drying run of the machine.,1
"An employee was loading automobiles on a railcar when she fell approximately 10 feet to the ground, fracturing her left knee and sternum.",1
An employee was using an impact wrench when it amputated his left pinky finger at the first joint.,0
"An employee's lower right leg struck a platform cart and received a laceration that became infected the next day, requiring hospitalization.",1
"On August 15, 2017, at approximately 1:30 p.m., an employee tripped over a computer mouse cord and fell, fracturing her left tibia. She was hospitalized.",1
"An employee was repositioning a pallet that was misaligned on a batch-off pallet magazine. When he raised the pallet, his left thumb tip was caught and crushed between the pallet and pallet magazine frame, removing flesh and the nail.",1
"While picking up trash, an employee began cramping due to the heat and dehydration.",1
An employee was cutting a fiber wrap off a ring spinner when one of her fingertips became stuck and amputated in the spinner.,0
"An employee was standing at the back of a truck watching the truck driver load a dolly of shrink wrapped boxes containing printer paper. The driver pushed the dolly onto the truck tailgate and raised the tailgate to the truck bed. The shrink wrap gave way and the boxes fell off the tailgate, striking the employee and knocking him to the ground. He broke his leg and suffered a bump on his head.",1
"On August 15, 2017, an employee was placing two ends of steel wire in a machine to be welded together when the hydraulic clamp used to hold two ends of a wire together caught and amputated the employee's left ring and pinky fingertips.",0
"An employee fell from a ladder and hit his head, suffering a minor skull fracture and requiring stitches.",1
An employee was reaching for a roll of tape on a blower motor when the employee's left pinky finger was caught and amputated between the blower motor guard.,0
"An employee was attempting to clean a roller when his rag and then hand were pulled into the roller, fracturing his fingers.",1
"An employee was welding near a bin of parts that was stored at an angle to provide better reach for employees when a fork truck came up behind the bin of parts to move another bin. The forks hit the bin behind the employee and the bin tipped over, hitting and fracturing the employee's leg. The employee was hospitalized.",1
"On 08/15/2017, an employee was struck by a high lift truck while operating an electric jack, requiring hospitalization for severe leg injuries.",1
"An employee was switching a tank connection from natural gas to propane when the gas ignited, causing thermal burns to his left and right hands.",1
"An employee was walking, tripped and fell resulting in a fractured hip.",1
An employee was operating a radial arm saw to cut packing material when the saw blade amputated his left middle fingertip and part of his left index finger.,0
"An employee was standing and opening a large cardboard box when he twisted his right knee, lost his balance, and fell on his right hip. He broke his hip, requiring hospitalization and surgery.",1
"An employee was steaming a pavement sealer when a gasket failed. Hot pavement sealer base blew out and struck the employee, burning the back of both legs and the right knee.",1
An employee was climbing a ladder and fell resulting in a head and shoulder injury.,1
"An employee was walking down a stairway when she tripped on the second to last step and fell, fracturing her right ankle.",1
"An employee was under a car hauler/trailer greasing the fittings when the driver pulled the vehicle away. The employee was struck by the car hauler/trailer, suffering injuries to his back, shoulder blade, and ribs.",1
"On August 15, 2017 an employee was struck by a motor vehicle while driving a utility vehicle, fracturing the employee's pelvis, hand, and leg.",1
An employee ingested Dimethyl Ethyl Amine and Rhodolian 675 (defoamer) after drinking from a cup that he believed contained soda.,1
"An employee was working on a manual clamp. He was holding the clamp with his left hand and holding a cylinder with his right hand. His right index finger was inside a slot on the cylinder housing when the clamp arm slipped out of his left hand and fell. When the unit fell, his right index finger was still in the slot and the top portion of the cylinder came down and amputated his finger. The equipment was not locked out at the time of the incident.",0
"An employee was standing on an elevated platform and placing a tarp on top of a roll-off box when he lost his balance and fell approximately 8 feet to the bottom of a metal solidification pit, breaking two neck bones and seven ribs. He was hospitalized.",1
"An employee was troubleshooting a press when the press cycled. The employee's right hand became caught between the beller head and the ring plate in the press, amputating his index, middle, and ring fingers.",0
"While near a power line, an employee was holding the hose from the pump truck. He was electrocuted and received burns and internal injuries.",1
"An employee fell while loading turkeys into a truck, suffering head trauma and requiring hospitalization.",1
"An employee was using a dolly cart to move an armature that weighed approximately 1,500 pounds when the cart tilted and struck him above the ankle, breaking his leg and ankle.",1
"An employee was working on I-beams while replacing a grating system when he fell approximately 20 feet to an electrical panel below. He suffered broken ribs, a broken leg, and a possible punctured lung.",1
"An employee was performing maintenance on a chairlift when the chairlift platform started to move and came off the line. The employee fell to the ground, suffering a broken pelvis.",1
"An employee was riding in the dump tank of a bean picker cleaning weeds out of the green beans. As he was climbing down from the bean picker, he fell to the ground, fracturing vertebrae and ribs. He was hospitalized.",1
"An employee was washing a truck while standing on a ladder when the employee fell 5 feet to the ground, suffering head and back contusions.",1
"An employee was operating a trimmer from a control panel when a chain came off the sprocket. After replacing the chain on the sprocket, he stepped out of the system, lost his footing, and fell 14 feet to the concrete floor. The employee sustained a broken pelvis and back.",1
"On August 15, 2017, an employee was exposed to an aerosol disinfectant in the office and experienced breathing difficulty and vomiting, requiring hospitalization.",1
"An employee was installing roof shingles when he fell to the ground, injuring his spine.",1
"An employee suffered heat cramps while building trusses, requiring hospitalization.",1
"An employee was labeling an export product on a skid when the employee tripped over the skid. The skid had a broken slat and the employee's hand fell between the broken slat, causing a seesaw action that partially amputated the employee's right pinky finger.",0
"An employee got up from a chair and tripped over her purse strap. She fell to the ground, fracturing her right hip.",1
An employee was auditing a load of goods on a loading dock when the back of a forklift struck her. She suffered a compound fracture to her right ankle and was hospitalized.,1
An employee was troubleshooting a rebar bending machine when his right pinky finger was caught and amputated in between the machine's stopper plate and the return lever.,1
"An employee was testing a transformer when an arc flash occurred, burning his arms and hands.",1
"An employee was operating a chipper and came in contact with a guy wire. The wire was drawn into the chipper and broke the employee's ankle, requiring hospitalization.",1
"An employee was loading material onto a racking system while operating a reach truck. As he backed out of the space, he was pinned against a beam and the reach truck, suffering chest contusions.",1
"On 8/16/2017, an employee was changing a band mill saw blade. The wheel of the blade was still turning as the employee removed the plywood covering the pit. The plywood made contact with the mill wheel, and the plywood then struck the employee on the left side of the face. The employee was hospitalized.",1
"An employee was pulling boards from a re-saw chain and feeding them through a ripsaw when a wood shard ejected from the ripsaw. The wood shard struck the employee and became embedded in the right buttocks, requiring hospitalization and surgery.",1
"An employee was inventorying diversionary flash-bang devices when a device fell from its protective cover. The pin also fell out, causing the device to detonate. The employee's left hand suffered soft tissue lacerations that required surgery and hospitalization.",1
"An employee was sitting on a picnic bench when she fell off and hit the ground, breaking her hip.",1
"An employee was installing covers on radio cabinets. While walking backwards on a grated platform, the employee fell approximately 1 to 2 feet onto a handrail below, suffering rib injuries.",1
"An employee was troubleshooting the lack of tar movement going from a tank truck to a storage tank when the flex hose disconnected and sprayed him with hot tar. He suffered burns to his right foot, right leg, both arms, and face.",1
"An employee was crossing from a working platform (24' above ground) to another lower area of the scaffold when he lost his footing and fell, breaking his hip, wrist, and femur and lacerating his chin and forehead.",1
"While loading an 18-wheeler trailer, an employee fell approximately 4 feet from the trailer to the concrete ground, suffering a concussion and requiring overnight hospitalization.",1
"An employee was tightening a bolt on a flange while standing on a wooden box when the employee slipped and fell from the box and struck a metal valve wheel, suffering a broken rib and punctured lung.",1
"An employee was servicing an aerial drop. He set up his ladder, ascended to about 18 feet, and secured himself to the strand using his body belt and safety strap. As he started working, his ladder began to slide to the right. He began descending the ladder to readjust it. As he was descending, the ladder slid again to the right, causing him to fall off the ladder from about 14 feet. He landed on his feet on the street and fell backwards, breaking his left heel and several bones in his right foot.",1
"An employee was emptying metal from a dump hopper that was on a forklift when the hopper fell from the forks and struck the employee on the left leg, breaking it.",1
"A flagger was struck in the head by the chute of a concrete truck, suffering a contusion.",1
An employee was making odorant deliveries when he became ill. He had completed three of five scheduled deliveries when he stopped work due to feeling overheated. He was hospitalized for dehydration and possible heat stress.,1
"After performing lawn maintenance in the sun, an employee became ill and began to cramp, requiring hospitalization for heat stress.",1
An employee slipped and fell down 13 steps while walking down stairs carrying tools and bags. The employee suffered a punctured lung and was hospitalized.,1
"An employee was struck by a reversing vehicle, suffering a fractured hip.",1
"An employee was using a lift magnet to lift and load a 121-pound plate into a CNC machine. He was guiding the piece of metal into the CNC to drop/set it down when it fell on and crushed his left index finger, amputating it at the knuckle.",0
"An employee was operating an electric-powered forklift. He turned to back up while his hand was resting on the outside of the vehicle. His right ring finger was then smashed between the frame of the vehicle and an adjacent steel rack, amputating his fingertip.",0
"An employee was delivering propane to a tank when the pressure relief valve popped off due to pressure buildup and struck the employee. The liquid propane then sprayed the employee, who fell approximately 10 feet from the equipment to the decking floor. The employee sustained multiple contusions, lacerations, and first and second degree burns.",1
"On August 16, 2017, at 5:30 p.m., an employee was attempting to disconnect a crane magnet when an arc flash occurred. He was shocked, receiving a 4-inch burn on his right forearm, a burn in the middle of the right side of his back, and a burn on the top of his right foot. He was hospitalized.",1
An employee suffered a severe allergic reaction after possible exposure to latex and was hospitalized.,1
"An employee was unwrapping a pallet of four drums to prepare an outbound shipment. The four drums were secured together and to the pallet with stretch wrap. After cutting away the wrap with a utility knife, the employee pulled on the wrap to free it from the pallet and drums. He had also staged his forklift next to the drum pallet. The forklift utilizes an implement known as a ""drum picker,"" which would be used to lift individual drums from the full pallet to fill the outbound load/order. While he was manually pulling the cut stretch wrap from the drums/pallet, he lost his grip on the stretch wrap and fell backward into the drum picker implement, striking his upper torso/back. He was hospitalized for a fractured C3 vertebra.",1
"A 5,400-pound magnet was attached to an excavator. Employees were using the magnet and excavator to pull metal out of piles of slag. When these activities were completed, the excavator operator placed the magnet on uneven ground. An employee was attempting to remove the magnet from the excavator when it slid and landed on the employee's feet, causing multiple fractures in both feet.",1
An employee was dumping a debris cart when the cart shifted and crushed a finger between the cart and the dumpster.,1
"On August 16, 2017, an employee was on the ground inspecting a part when another part fell from a storage rack and struck the employee's head, causing a skull fracture.",1
"On August 16, 2017, an employee was jackhammering concrete around an electrical conduit bank when the jackhammer struck an electrical line and an arc flash occurred. The employee suffered burns from the waist to just above the knee.",1
"An employee was dismounting the rear of a backhoe when his wedding ring became caught on equipment, causing a traumatic amputation to his left ring finger.",0
"An employee was carrying insulation material on a roof when he slipped on dew and fell on the roof surface, injuring his shoulder and possibly his head. He was hospitalized.",1
An employee was attempting to remove a plastic jam in a tamper bander when the cutter activated and amputated the employee's right index fingertip. The machine was guarded at the time.,0
An employee was moving cargo when he suffered a heat-related illness.,1
An employee was burned on their back from a gas-related fire.,1
"An employee was looking to retrieve shopping carts in the parking lot when a customer reversed her vehicle to get to an available parking space and struck him. He fell backwards to the ground and suffered a head injury, requiring hospitalization.",1
"Several employees were unplugging an electrical cable to install a new switch to a transformer containing 7,200 volts when an arc flash occurred. One employee sustained burns to his left hand and was hospitalized.",1
An employee was not feeling well while servicing a truck. He was hospitalized for heat exhaustion.,1
"An employee was checking the tension on a v-belt as part of preventative maintenance. When he grabbed the belt, it suddenly activated and pulled his hand into the pulley system, amputating his right ring and middle fingertips. The belt was unguarded and the conveyor was not locked/tagged out at the time.",0
"An employee was adjusting the track on a skid steer that was on a jack when the skid steer shifted and caused the jack to slip. The skid steer then fell on the employee, fracturing the T2 vertebra.",1
"An employee was operating a hydraulic press by foot pedal. Her right hand was on the press as she bent to retrieve parts that fell on the floor. As she reached for the parts, her foot activated the press and two of her right-hand fingers were caught in the die. Her pinky and ring fingers were partially amputated.",0
"On August 16, 2017, at approximately 11:00 a.m., an employee was stacking lumber from the green chain when he passed out. He was hospitalized with heatstroke.",1
An employee was about to step up onto a manipulator car in order to change a light when he slipped and fell onto the car and sustained multiple fractures to his left rib cage.,1
An employee was picking up a safe about the size of a printer and moving it from his desk to the floor when he lost consciousness. He regained consciousness and was hospitalized.,1
An employee was cleaning a feeder when the employee's gloved left hand was pulled into the feeder's rollers. The employee sustained a laceration to the left palm and was hospitalized.,1
An employee was starting a plastic extrusion line when hot plastic burned his arm. PPE was not worn at the time of the incident.,1
An employee attempted to remove a piece of tape that got stuck on a roller. The cutting device of the tape machine was engaged and caused a partial amputation of his finger.,0
"An employee was standing on the running board of an Army M915 trailer looking into the side mirror. When he stepped down, his left ring finger was caught and de-gloved on the side mirror.",1
"An employee was bleeding residual pressure off a hydraulic line on a tractor and held a metal bracket in front of his face to avoid being splashed with small amounts of hydraulic oil. When pressure was released, it hit the metal bracket and forced it into the employee's face, fracturing his jaw and knocking out a tooth.",1
"The injured employee moved a super sack of product to the crystallizer area by forklift. The sack is lifted by a hoist over the hopper of the slurry machine and the bottom of the super sack is cut. The employee was attempting to retrieve a piece of sack that fell into the operating hopper when his left hand became caught in the hopper, injuring his middle and ring fingers.",1
An employee had taken work boots out of a box and put them on when she felt something like a sticker in her boot. She sat down and removed boot to find a baby rattle snake in her boot biting her.,1
"An employee was counting laminate backer sheets when she fell and her leg was caught between the pallet and laminate backer sheets, breaking her knee.",1
"On August 17, 2017, an employee was attempting to retrieve a dropped tool from a mill roller when the employee's right hand was caught in the ingoing nip point of the roller, amputating several fingers.",0
An employee's right leg gave out while stepping down from the second step of a platform. The employee fell to the ground and suffered a fractured hip.,1
"An employee pulled over to the side of the road and stepped in an ant bed. He was bitten on his legs had an allergic reaction, requiring hospitalization.",1
"An employee was trying to tarp a roll-off container when he fell back on his tailbone, requiring hospitalization.",1
An employee was using a winding machine when his right middle finger was pinched and partially amputated between the machine's carriage and roller.,0
An employee was maintaining a forming machine (forms molten glass into glassware) when he became overheated and experienced stomach cramps and nausea. He was hospitalized for heat exhaustion.,1
"On 8/17/2017, an employee sustained second degree burns to her right cheek, right chest, right shoulder, and entire back when a client  threw a pot of hot coffee on her. She was hospitalized.",1
"An employee was working on a mixer when a flash fire occurred. He suffered first degree burns to the left arm, hand, and face and second degree burns on his left arm and other areas.",1
"An employee was operating a machine when the die became clogged. As he tried to fix it, the die amputated one of this left fingertips. The guard was in place at the time.",0
An employee was transferring a pot of hot oil from the kitchen to the oil disposal container for recycling when some of the hot oil spilled on his left leg. He was hospitalized with burn injuries.,1
"An employee was using an air gun to clean the lacquer off a bead tooling machine part when the air gun and employee's left hand were pulled into the machine, partially amputating the middle fingertip. The machine's interlock was in place at the time.",0
"An employee was bending sheet metal on a press brake when it cycled and crushed his left arm, breaking it and requiring hospitalization.",1
"An employee was standing on the tire of a piece of heavy equipment (loader) to clean the windows and change an air filter. While descending from the tire, the employee fell to the ground, fracturing the left pelvis.",1
An employee was injured on the jobsite and hospitalized.,1
"An employee was standing on a bridge sidewalk when a passing vehicle with a ladder rack snagged a vertical hand line hanging from the upper portions of the bridge. The rope struck the employee along the midsection and threw him against the bridge's hand railing. He suffered two fractured ribs, a mild concussion, and minor bleeding in the spleen.",1
An employee tripped over a floor mat in front of an ice machine and injured her face.,1
An employee was cutting wood with a saw when it amputated the employee's left middle finger. The saw was guarded at the time.,0
"An employee and two coworkers were working from an elevated platform when it shifted, causing them to fall on top of each other and onto one end of the platform. One of the employees was hospitalized with a broken right wrist and right ankle.",1
"An employee was operating a milling machine when the engine compartment caught fire. The employee had to go through the fire to exit the machine, suffering first and second degree burns to the left and right forearms, a wrist, and face.",1
"On August 17, 2017, an employee was on a step ladder helping to remove a sanitary sewer pipe in a ceiling when the employee fell approximately 4 feet off the step ladder, suffering cracked back vertebrae and requiring hospitalization.",1
"While working at a client's home, an employee was walking on a staircase and the stairs gave way. The employee fell 9 feet through the stairs and sustained a compound fracture to the left ankle.",1
An employee was reaching for a water bottle when his fingertip was caught and amputated between the chain and sprocket on a nearby drive line.,0
"An employee was working to move material off a skid with a 6,000-pound electro magnet. When he activated the magnet's release mechanism, his right thumb was caught between the release handle and the magnet, crushing his thumb tip.",1
"On August 17, 2017, at approximately 10:45 AM, an employee was attempting to hang a 3-day notice on a customer's residence when she was attacked by a dog. The dog bit and amputated her right pinky fingertip.",0
"An employee was operating a laser guided vehicle (LGV). The employee put the LGV in manual, got off the machine and was pinched between the LGV and conveyor, suffering a right hip contusion.",1
"An employee was on a ladder while moving a ceiling tile when the employee fell off the ladder and struck a countertop, suffering a concussion and dislocating the right pinky finger.",1
"An employee became lightheaded from heat stress while reading water meters, requiring hospitalization.",1
"An employee was using a cordless impact driver when the bit slipped off a screw head and landed on his left hand, puncturing the palm and requiring hospitalization.",1
An employee was cutting a beam with a saw when it kicked back and amputated four fingers.,1
"An employee was standing on a ladder in a well cellar installing a tubing head with the assistance of a forklift operator. The tubing head was moved into place by running a 2-inch lifting strap through swivel hoist rings on opposite sides of the tubing head and around the forks of the forklift. The employee was removing the swivel hoist rings from the tubing head when the forklift operator started to boom in the forks of the forklift. This caused the strap, which was still being attached to the forks and the swivel hoist ring, to tighten and lift the swivel hoist ring housing. The employee's left thumb was caught and severely lacerated between the hoist ring housing and hoist ring cap screw.",1
"As part of a storm restoration project, an employee was on the ground disconnecting wires from electric poles. One or more poles started to roll and struck the employee, breaking the left ankle.",1
An employee was cutting meat with a band saw when his right pinky finger hit the saw blade and was lacerated.,1
"A temporary employee was shoveling holes to plant trees when he was overcome by heat exhaustion and dehydration, requiring hospitalization.",1
An employee was operating a pickup truck to deliver a special events trailer to a ball field. The employee dropped the trailer off and exited the pickup truck. The unmanned vehicle began to roll and the employee attempted to stop the rolling pickup truck. The employee's right leg was struck by the vehicle. The employee sustained crushing injuries and was hospitalized for surgery.,1
"While standing on the third step of a ladder and tightening an overhead bolt, an employee lost balance and fell to the concrete floor, fracturing the left leg.",1
A temporary employee was writing on a large roll of paper when a forklift driver pushed another roll against the roll she was writing on and her left forearm became lodged and fractured between the rolls.,1
"An employee was directing a forklift operator to a location to offload a metal staircase when the  staircase slipped off the forklift and landed on the employee's right foot, fracturing his big toe and second toe.",1
"An employee was on a lower level when an unsecured steel grate fell from the level above and struck the employee. The employee sustained a concussion, broken rib, broken vertebrae, and inter-laceration of the liver.",1
An employee was working on the molding machine when it jammed. The employee shut down the machine and attempted to remove the jammed piece. The machine's bottom head was still rotating and amputated the employee's left index fingertip and avulsed the left middle finger. The employee's left palm was also lacerated from the middle finger to the small finger (pinky).,0
"An employee began to experience arm and leg cramps while slinging slabs in the hold of a ship, requiring hospitalization for possible heat exhaustion.",1
"An employee was performing maintenance on a dryer when the employee's finger made contact with the dryer belt and pulley, amputating it.",1
"An employee was clipping in a new conductor on an existing distribution line when a phase to ground fault occurred, causing an electrical flash that burned his left arm and shoulder.",1
"An employee was working from an extendable boom platform when the boom was struck by an overhead crane's block and tackle, which had broken loose. The employee was thrown outside of the platform, suffering multiple spinal injuries and requiring hospitalization.",1
"An employee was cutting a 1-inch round stock on a shear. His right index finger was near the edge of the round hole on the guard when the shear was activated. The material kicked back, causing the employee's right index finger to become pinched and amputated between the guard and the 1-inch round stock.",0
"An employee was struck by a load being carried by a forklift. He was knocked down and his foot was pinched by the load, suffering an open wound that required hospitalization and surgery.",1
"An employee was attempting to clean dirt from a conveyor when her smock was caught in the pulley and her left hand was crushed and lacerated in the pulley, requiring hospitalization.",1
"An employee was driving a ground rod into the ground when he missed/slipped and fell into the rod. His head struck the rod, breaking the eye socket bone and driving it into part of his brain. He was hospitalized.",1
"An employee was stepping down from a ladder when he missed a step, fell to the ground, and broke his ankle and lower leg.",1
"While exiting the cab of a tractor-trailer rig, an employee slipped on the step and fell, hitting an adjacent truck and breaking some ribs. The employee was hospitalized.",1
"On 8/18/2017, an employee was operating a sheet metal electric power rotary beading and crimping machine to make collars. The employee's leather glove was caught between the roller and the crimping of the machine wheel, and the left index finger was amputated.",0
"An employee was operating a brake press when the employee's hands were caught in the point of operation, causing a wrist contusion.",1
An employee was operating a baler when the baler door closed on and amputated the employee's left ring finger and possibly a second finger.,1
An employee was attempting to unjam a machine when one of the employee's fingers was caught and amputated between two machine rollers.,1
"An employee was on the roof to see what was needed to be completed that morning when he stepped on a piece of felt paper, slipped, and fell on the roof, breaking his ribs and requiring hospitalization.",1
An employee was hitting a break room window from outside the facility to get someone's attention when the window glass lacerated and became embedded in the employee's right arm.,1
"An employee fell backwards while walking up a set of stairs, hitting the concrete ground and injuring the left hip.",1
"An employee was checking grade lines when he was struck by a front-end loader, breaking his leg.",1
"An employee had cut a piece of a tree (a log) that became stuck in the ground in a vertical position. He was picking up a rope when the log fell on him, breaking his left leg and right ankle.",1
"An employee was carrying a hot water tank down a flight of stairs using a dolly when the load shifted and the employee fell, hitting his head.",1
"An employee was replacing a broken clevis and bolt on an automatic guided vehicle. When the employee moved the cylinder to inspect it, the cylinder released in the upward position. The employee's right hand was caught between the top of the stroke cylinder shaft and the hood base of the equipment.",1
"An employee was walking across the parking lot prior to reporting for shift, lost her footing and fell resulting in a fractured cheekbone and lacerations that required sutures.",1
"An employee was throwing a board over a cross-over belt when his right index finger was smashed between the board and a piece of metal, amputating his fingertip.",0
An employee was shot onsite by a family member.,1
"On August 18, 2017, an employee was leveling a yard and dumping rock from a dump truck bed. While attempting to close the tailgate, the employee discovered a rock was lodged in the tailgate. The employee lifted the tailgate, which released the rock. The tailgate then came down and pinned the employee's right index finger against the dump truck bed. The employee was hospitalized and the finger was amputated to the first knuckle.",0
An employee was operating a saw when he heard a pop sound. He turned off the saw and was inspecting it when then the still-rotating blade amputated his left index finger. The blade cover was removed at the time of the incident.,1
An employee was feeding a coil of steel into a mechanical punch press die when the press cycled and amputated the employee's left middle fingertip.,0
"An employee was trying to unjam a part on a sort table when a part slide mechanism pinched her right middle finger between the air-actuated slide and a part. As she pulled her hand out to remove her finger, her fingertip was amputated just below the cuticle.",0
"When a patient became combative, an employee intervened and fell to the ground. The employee sustained back and knee injuries.",1
"An employee was standing on a steel beam during a re-rigging operation when a steel beam struck his right leg, fracturing his femur.",1
"An employee was trying to reset an air conditioning system. While troubleshooting the problem, his left index finger came in contact with 270 volts of electricity. He sustained a laceration to his scalp and burns to his left thumb, index finger, and middle finger, requiring hospitalization.",1
"After cleaning out melamine resin lines that were blocked, an employee wanted to verify that a control valve was operating properly. While standing on a 4-foot ladder, the employee reached over to the far side of the valve and manually actuated the solenoid, causing the valve to open. The employee's right middle finger was in the valve to verify it was open when the employee lost their footing and released the solenoid. The valve then closed and amputated the right middle fingertip.",0
"An employee slipped and fell on a plastic bag, breaking a hip and requiring hospitalization and surgery.",1
"An employee was using a chainsaw to fell a 68-foot tall, 16-inch to 20-inch diameter at breast height chestnut tree when the tree began to fall and struck another tree. The butt of the tree kicked back, striking and fracturing the employee's right leg just above the ankle.",1
"An employee and a coworker were starting up the winder on a calendar machine when the employee became caught between the machine's spindle and material being fed into the winder, suffering a fractured arm and fractured left ankle.",1
"An employee was stopping at a mail delivery point when he stepped out of his vehicle and rolled his ankle, dislocating it and requiring surgery.",1
"An employee's hand was caught between a load and a chain sling, resulting in his right thumb being amputated above the knuckle.",1
An employee was apprehending a suspect at the west side building entrance. The employee was attacked by another suspect resulting in a broken jaw requiring surgery.,1
"An employee was cleaning a dough sheeter machine used for pizza dough using a rag when her fingers were caught in the machine, amputating her right middle finger.",0
"After working a double shift in the mill, an employee felt ill and was hospitalized for dehydration.",1
"An employee tripped over bun trays and suffered a broken right wrist, requiring surgery.",1
An employee was welding on a metal floor grate in the load-out building when some overhead blood meal came down causing a flash fire. He received burns to his left arm and hand.,1
"An employee was working on a residential re-roofing job when he fell from the roof to the ground, suffering multiple fractures to the elbow/arm and possibly other bones. He was hospitalized.",1
"An employee was ascending a ladder when it started teetering back and forth. He fell off and fractured his leg, requiring hospitalization.",1
"An employee had been positioning a natural gas trailer and the trailer slipped off of the hitch. The employee then tried to clean out/adjust the trailer hitch on the semi and the hitch moved which pinched his left middle finger, amputating the fingertip.",0
An employee was climbing an extension ladder to a roof and either stepped onto the roof and slipped on dew or miss-stepped on the ladder and fell approximately 9 feet to the concrete ground.,1
"An employee was walking downstairs, missed a step approximately halfway down the stairs, and fell the rest of the way down, fracturing the right shoulder and right arm.",1
"An employee was blowing up a truck tire when it exploded and struck the employee's head, requiring hospitalization.",1
"On 8/20/2017, at approximately 11:35 a.m., an employee was bagging a rotor assembly when the load shifted, pinching the employee's hand between the rotor assembly and the saddle of a skid and causing possible ligament damage.",1
An employee was operating a scissor lift to raise pipes near the ceiling. His hand was on the rail of the scissor lift when his left pinky fingertip was caught and amputated between a piece of electrical conduit and the scissor lift railing.,0
"An employee fell 30 feet from a scaffold while installing siding on a new apartment building, requiring hospitalization.",1
"An employee tripped on a rug and fell to the ground, breaking her hip.",1
"An employee was struck in the crosswalk of a city street by a motor vehicle, requiring hospitalization for a torso injury.",1
An employee was using an air pressure hose to drain a nitric acid line into a tote when the hose blew out of the tote and nitric acid burned the employee's legs and groin.,1
"An employee was inside a trailer getting ready to inspect a returned coil that was strapped to a crate. The employee was releasing the straps when the 2,800-pound coil pinned him to the floor, causing bruises and soreness to the chest and leg area.",1
"An employee was working underneath a vehicle when it came down on his rib cage, fracturing his ribs.",1
"An employee was working on a pump jack scaffold when he fell 15 feet from the scaffolding to the ground, breaking his shoulder, wrist, and ribs.",1
An employee had been leveling dirt with a shovel in the hot sun for almost 8 hours when he felt very faint. He was hospitalized for heat stress.,1
"While walking the grounds, an employee stepped on a metal stake used to hold down landscape blanketing. The employee's right foot was impaled.",1
"An employee was on the ground and walking to the rear of a trailer bed. His hand was on the trailer bed floor, which consisted of rolling slats (moving floor) powered by hydraulics, when the floor was activated for testing purposes. His hand was caught in the trailer bed floor, partially amputating his left fifth fingertip.",0
An employee was installing bearings on a conveyor when the employee's right ring and little fingertips were caught and amputated between the chain and sprocket.,0
"An employee's finger was pinched between the core and metal shaft on a plastic roll, amputating his fingertip.",0
"An employee was operating a 40-quart dough mixer. When the mixing was complete, the employee picked up the steel mixing bowl with the dough in it, which weighed approximately 40 pounds. The employee then suffered an incarcerated hernia, requiring hospitalization and surgery.",1
"An employee was walking around checking a truck when he stepped on a rock and twisted his foot. He then fell on his face, lacerating it.",1
An employee was pushing lumber back into a chopper saw when the saw cut his hand between the thumb and index finger.,1
"An employee fell approximately 10 feet from an elevated lift platform while pulling furniture to fulfill a customer order, suffering head and wrist injuries that required hospitalization.",1
"An employee was dropping a trailer landing gear and was pulling the fifth wheel release when he heard a popping noise, directly followed by a sharp pain in his right elbow. His elbow started to swell up and required hospitalization.",1
"An employee was unloading a pad transformer inside a trailer when he stepped back and slipped on the wet trailer floor. He slipped 2 to 3 feet and then fell off the back, hitting the concrete floor and fracturing his right humerus.",1
"An employee was installing additional bolts on the secondary side of a transformer, which had a voltage of 277480, when a flash occurred and burned the employee's face.",1
An employee passed out and suffered a heat stroke when shoveling dirt to throw on plastic that was laid for strawberries.,1
"An employee was climbing into a trailer when he slipped, fell to the ground, and injured his head and back.",1
An employee was using a bull knife while cutting meat when the knife lacerated his left forearm. PPE was being used at the time of the incident.,1
An employee was cutting bacon with a knife and amputated a fingertip.,0
An employee was cutting a piece of wood with a handheld circular saw when the saw kicked back and amputated his right small fingertip without bone loss.,0
An employee placed a 4-foot ladder on top of a 5-foot scaffold and climbed up the ladder to install drywall when the scaffold and employee fell over. The employee suffered a fractured skull and was hospitalized.,1
An employee observed an unoccupied tug rolling toward an aircraft and was attempting to stop it when the employee suffered a cut wrist.,1
"On 8/21/2017, an employee was checking a natural gas compressor at an oil and gas lease when his right hand was caught and severely lacerated between the fan blade and the frame of the compressor. His hand had to be medically amputated. The fan was running at the time of the incident.",1
"An employee was skiving a tire for retread when sparks from the skiver landed in the open booth used for retreading operations, igniting a flame. The employee suffered from smoke inhalation.",1
An employee fell from a truck and fractured their collarbone.,1
"An employee was measuring the corner of a roof. When he adjusted his lanyard to get to the other side of the roof, he tripped and fell 21 feet to the ground. He broke his L1 vertebra and was hospitalized.",1
An employee was moving a 3 x 8 metal plate when his right hand was caught between the metal plate and the top layer of a stone resting on a kiln cart. His right middle finger broke in three places and was partially de-gloved and surgically amputated.,0
A pole truck was lifting a piece of equipment when the chain failed and struck an employee on the head and shoulder. The employee suffered a head laceration.,1
"An employee was mopping stairs in a stairwell due to some water accumulation when she slipped and fell down the stairs, suffering back pain and a bruised tailbone.",1
"An employee was walking with a cane when she tripped on the cane and fell, breaking her right femur.",1
"An employee tripped into the side head knives of a planer machine, lacerating his hand and requiring hospitalization.",1
"An employee fell 35 feet while standing on a wall, breaking his heel and pelvis and requiring surgery.",1
An employee was assembling a boom/dipper for a backhoe when the bucket ram was lowered and partially amputated his right pinky finger.,0
An employee was moving a large standing fan in the hallway to create some room. Her fingers went inside the guard and the running blades lacerated her left middle finger.,1
"An employee was changing the bologna casing in a stuffing machine when the clamper and trim blade were activated, amputating his thumb tip.",0
"An employee was changing a bearing on an auger. He stepped down on the auger, which was still moving, and his foot was caught between the auger and the wall, amputating his right pinky toe. The auger was not locked/tagged out at the time.",1
"An employee was changing the roller on a roller coater when it smashed two of his left-hand fingers, requiring hospitalization.",1
"An employee was testing a transformer when his hand hit a primary and was shocked, burning both of his hands.",1
"An employee was installing new storm drain pipes and storm inlets in a trench 9 feet deep when it caved in, trapping him up to the shoulder area and injuring his back. He was hospitalized.",1
"While operating a winding machine, an employee was unable to let go of the finishing tape on the outside of the coil or to stop the machine via the foot pedal. Her arm was then caught and seriously injured, requiring hospitalization.",1
An employee had repaired a transmission valve on a backhoe and went to start the backhoe for testing when the transmission pressure control released and injected hydraulic fluid into the employee's left index finger.,1
"An employee was pushing a trash cart to the dumpster when he fell onto the pavement. He twisted his left knee and suffered detached quadricep muscles in both legs, requiring hospitalization.",1
An employee was using a table saw when the blade lacerated the employee's finger.,1
"An employee climbed up four stairs to a landing, handed a survey to an employee, turned around to go back down, lost his footing, and fell down the four stairs, breaking his right ankle and requiring surgery.",1
"An employee installed an insulator on a pole and was coming down from the pole using a boom lift when he saw something was not complete and went back up to the location where he was previously working. He then made contact with a switch, which sent an electrical current through the left side of his body and out through the right hand. His right hand was amputated.",1
"An employee was finishing concrete when he became lightheaded and ill due to heat stress and dehydration, requiring hospitalization.",1
"An employee was locking up the gate at the site when his personal vehicle, which was still in gear, struck him, injuring his shoulder and ribs.",1
An employee was unloading a goose neck trailer using a winch and cable. The employee's hand was caught in the winch hook when the truck pulled away amputating the index finger below the nail.,0
An employee suffered a heat related illness while working a game as part of the grounds crew and was hospitalized for dehydration.,1
An employee was bitten by a spider.,1
"An employee was operating a forklift while his right hand was outside of the driving compartment. He drove near a dumpster and his hand became caught between the forklift and the dumpster, causing a soft tissue crush injury to his right hand between the index finger and the thumb.",1
An employee experienced a fingertip amputation.,0
"On 8/22/2017, an employee lost his footing while disconnecting hoses between a tractor and trailer. He fell and struck the ground, suffering fractured ribs, a collapsed lung, and a head contusion, requiring overnight hospitalization.",1
"An employee was helping to offload a rock crusher and acting as the spotter when the load shifted. As he dismounted the rock crusher to inform the operator he broke his left lower leg and ankle, requiring hospitalization and surgery.",1
"An employee fell approximately 15 feet while climbing up a scaffold ladder, suffering a possible fracture.",1
"An employee fell approximately 12 to 15 feet from a ladder to the ground, suffering internal injuries that required hospitalization.",1
"An employee was cutting the straps off a concrete tabletop when the tabletop fell on him, breaking his leg/foot.",1
"An employee was running wire through a crawl space when he fell through the drywall ceiling and landed 18 feet below on a concrete surface, suffering blunt force trauma to the head, a severe laceration to the leg, and a fractured lower back.",1
"An employee was walking to a table when her step locked and she fell to the floor, breaking her left arm.",1
"An employee was repairing a tire and determined there was bulge on the side wall of the tire. The tire ruptured, knocking the employee over. The employee sustained a fractured arm and was hospitalized.",1
"An employee had just loaded a liquid cargo trailer when his fall protection became stuck on the trailer's crash box and would not return to the full upright position. He was trying to loosen the platform from the crash box when it released, raising quickly and striking him on his hard hat. He was knocked off balance, causing him to fall backwards off the trailer. He broke his ribs and injured his back.",1
"An employee climbed up a ladder to unhook it from a barge. The employee climbed up 4 to 5 steps when the ladder moved. He lost his balance and fell 6 feet to the floor of the barge, fracturing his left wrist and right knee and possibly fracturing his right hip.",1
An employee was hospitalized after a push cart hit her foot.,1
An employee and a coworker were clearing a valve jam on a valve inserter machine when the coworker cycled the machine while the employee's hand was inside. The machine then amputated the employee's right index finger.,0
An employee was clearing a clogged dust collector when it amputated two of the employee's fingertips.,1
"An employee and a coworker were moving a metal cart that had metal pieces loaded on it when the employee's right thumb was caught between the cart edge and a metal piece. When the employee pulled his hand out, his right thumb was amputated (with bone loss) from the nail upwards.",0
"An employee was operating a head stamping machine when it jammed. As the employee attempted to unjam the machine, it crushed and amputated the employee's left ring and middle fingers.",0
"An employee was picking up trash on a roof when he fell through the rotted metal roof 7 feet to the ground below. A piece of metal cut him from his stomach to his esophagus, requiring surgery.",1
"On August 21, 2017, an employee was on top of an 8-foot high box moving a pallet when he lost his balance and fell to the ground, injuring his head and torso.",1
An employee was adjusting the high/low switch on his truck-mounted welder. He was turning around when he lost his footing because it had just rained and his truck bed was slick. He went to steady himself and reached to grab onto something with his hands. His right hand slid underneath the cowling of his welder and two fingers were severely lacerated by the motor fan blades. He was hospitalized.,1
"An employee located a ticket that required him to maneuver down an embankment under a highway overpass. A contractor then approached the area to have a discussion, so the employee proceeded down the embankment to speak with the contractor. About halfway down, he was stepping on a boulder when it shifted. His right foot twisted and broke, requiring hospitalization and surgery.",1
"An employee was closing the doors on a water cabinet when the right door closed on one of his fingers, amputating the fingertip.",0
"On 8/23/2017, an employee was exiting the driver area of a delivery vehicle when he slipped and fell to the ground, fracturing his wrist.",1
"While cleaning and sanitizing trays and racks, a temporary employee ingested diluted cleaner (Super Power Foam 5339) that got around his mouth, mustache, and goatee. The temporary employee suffered pain in his throat and right rib cage.",1
"An employee was cinching up a rigging cable on a forklift when a steel beam fell off the forklift and struck the employee's legs, breaking the left femur and right tibia.",1
An employee was conducting preventative maintenance on a mixer when the employee's left hand was caught in the belt and pulley resulting in an amputation injury. The mixer was not shut down or locked out at the time.,0
An employee fell from an 8 foot ladder while working on the fan cool unit above the ceiling. The employee suffered a large laceration on the forehead above the left eye and a fractured C2 vertebrae.,1
"An employee operating a resaw attempted to pull a stick from a chain driving the saw. The chain caught his glove, pulling his right hand into the sprocket and chain and amputating his right index fingertip. The chain was unguarded at the time.",0
"An employee was shutting down equipment at the end of a work shift when she turned and her left foot was caught on a scanner cord. She fell, hitting and cutting her nose and bruising her right knee. She was hospitalized.",1
"An employee was clearing a dough jam on a mixer when the gate caught the employee's hand, removing skin from two to three fingers. The employee was hospitalized. The machine was guarded at the time of the incident.",1
An employee was moving a portable welder from the back of a pick-up truck when his right ring fingertip and nail were amputated between the handle of the welder and the pipe rack.,0
"While walking to the sink in the break room, an employee slipped and fell on the wet floor, suffering back and shoulder injuries.",1
"An employee was trying to unjam boards that were fed into a notcher when a board slammed against his right hand, partially amputating his middle finger.",0
An employee was operating the tube bending machine and amputated the right ring finger half way down the nail.,0
"An employee was on top of cabinets cleaning ceiling fixtures when he lost his balance and fell 8 to 10 feet, requiring hospitalization for a broken back, hip, and nasal bone.",1
"An employee was troubleshooting a manure drive and attempting to change the timing by adjusting the tensioner on the drive chain when the chain caught his fingers, amputating half of his left middle finger and most of his left pinky finger and lacerating his left index and ring fingers. The three-phase switch next to the guard was off at the time.",0
Employees were removing storefront glass panels when a panel broke into three pieces. The glass lacerated the injured employee's right bicep.,1
"An employee was brewing tea when the tea basket fell. The hot contents spilled on and burned the employee's chest, shoulder, and neck, requiring hospitalization.",1
An employee was attempting to clean a clog on a stringer machine when it cycled and amputated her fingertip. The machine was running at the time.,0
"An employee was standing on the right side of a horse waiting for sedation to take place prior to surgery when the horse kicked him on the head, resulting in bruising/a contusion. He was hospitalized.",1
"An employee was loading a truck for the day and putting a pallet jack into the trailer. While stepping between the dock and the trailer, the employee's right leg went into the 8-inch gap. The employee sustained a deep laceration to the leg below the knee, requiring surgery and hospitalization.",1
An employee suffered a chemical burn while removing a hose cap.,1
"An employee was removing a chain on the floor from a self-supporting steel frame when the 1,500-pound frame fell on the employee, lacerating the employee's left arm and fracturing the left foot.",1
"On 8/23/2017, an employee tripped over a small rise in the entrance doorway while walking into the facility, suffering several fractures to the tibia and knee damage. The employee had surgery.",1
An employee was hydro-blasting a column when the pressure end of the nozzle contacted and lacerated the employee's lower leg.,1
"An employee's hand was caught in turning machinery, amputating the index and little fingers (with bone loss).",1
An employee was trimming a plastic cooling fan for a spindle motor with a pair of scissors when the scissors amputated one of the employee's fingertips.,1
"While cleaning a seafood area, an employee tripped on a pan of hot fryer oil and was burned on the buttocks and groin, requiring hospitalization.",1
"An employee was stepping on plastic bags on the floor when he fell, breaking his ankle and requiring hospitalization/surgery.",1
"An employee was cleaning a fermenter room when his right foot was caught in a machine's roller mechanism, partially amputating his right heel.",1
"An employee was operating a spreader bar while installing an HVAC unit on a rooftop. A load was being lowered while the injured employee got into position. The load came down too fast for the employee to move out of the way and the spreader bar slammed into his steel toe boot. His hand was caught between the load and the bar, amputating two fingers.",0
An employee was walking through an aisle and tripped over a broom. The employee fell to the floor and suffered a broken hip.,1
"A security guard was performing a welfare check on a man who pulled a gun and tried to shoot her. She then fell back and braced her fall with her left hand, breaking her wrist and requiring hospitalization.",1
An employee slipped and fell on the wet floor that was being cleaned while running to attend to a patient. The employee was hospitalized with a fractured leg.,1
An employee was removing a utility pole from the ground when it broke loose and struck the employee's back.,1
"An employee was carrying a large and heavy box of shoes up a ladder, lost balance and fell off the ladder resulting in a broken right tibia and fibula.",1
"An employee tripped and fell down the stairs, spraining and cutting her left ankle and fracturing her tibia. She was hospitalized.",1
"An employee was operating a triple pallet jack to lift cases when he ran into a support beam. His right thigh and knee were pinched between the equipment and beam, resulting in a contusion that required hospitalization.",1
"An employee was changing a tire on a piece of heavy mining equipment when the rim came off and struck the employee. The employee was thrown approximately 10 feet, breaking two arm bones and one rib. The employee as hospitalized.",1
"An employee was walking down a hallway when he tripped, hit his head on the door, and fell, injuring his head and shoulder. He was hospitalized and had shoulder surgery.",1
"An employee was moving a stack of chairs when they fell over, tripping the employee. The employee fell on the floor and suffered fractured hip, requiring hospitalization and surgery.",1
"An employee was working at a stacker machine, building a log that was held up by a log sword, when the log sword fell behind the stacker. As he was attempting to retrieve the log sword, the log dropped, crushing his hand under the sword plate and amputating his thumb.",0
"An employee was loading a riding trowel when the employee's finger was caught between the riding trowel and equipment, breaking and lacerating it.",1
An employee was loading a screed machine into a semi-trailer and descending the machine's ladder when he fell and hit his head on the asphalt below. He suffered a brain hemorrhage and brain swelling.,1
"An employee was conducting maintenance on the triangle bagger. While attempting to re-attach a metal sleeve/tube to the machine, the employee's hand was pulled into the auger, amputating the right little finger.",0
An employee was learning to operate an edge sander and suffered a finger amputation while cleaning out the sander.,1
"After stocking and organizing product in a warm warehouse, an employee felt ill. She was hospitalized with heatstroke.",1
"An employee was replacing a broken pin at the sorter bay. After removing the pin, the employee used a carter pin to energize the valve. The cylinder rod extended and he used his left index finger to check the alignment of the clevis and Pad-I. The carter pin slipped, causing the valve to de-energize and the cylinder to retract and amputate his left index fingertip.",0
"An employee was power washing a vertical pipe while standing on a step ladder when the employee's foot went off the ladder. The power washer wand was then pulled out of the pipe, and the high-pressure washer fluid contacted and cut the employee.",1
"An employee fell approximately 35 feet while erecting a scaffold, suffering a broken left leg, broken right arm, fractured pelvis, and head bruises.",1
"An employee was rigging down bales that were being lowered out a V door and down a slide with a winch. As the bales were being lowered to the catwalk via the slide, one section became stuck on a roller on the rig floor. When the employee reached down to free the bale, it came free and knocked him off balance. He fell through the V door and down the slide, striking an object and suffering fractured facial bones, broken ribs, and a collapsed lung.",1
"An employee was walking down a loading dock when he tripped over a fixed object on the floor. He fell and fractured his right shoulder, requiring hospitalization and surgery.",1
"An employee had just walked through two double swinging doors to the mailroom. The employee attempted to cross a floor scale and tripped over the edge of the scale. She fell to the ground and as the double swinging doors swung back through, one of them struck her in the head and fractured her neck.",1
"An employee was inspecting and photographing pipeline installation activities when he stepped backwards into an impression in the ground. He lost his balance and fell, hitting his head on a lowboy trailer. He was hospitalized with fractured vertebrae in his upper back.",1
An employee was standing behind a sit-down forklift. He was trying to lift out the LP gas tank and was having difficulty and asked for assistance. Another employee operating a stand-up forklift came over to help and struck the employee on his right hip. The injured employee fell to the ground. He was hospitalized for a fractured pelvis.,1
Two employees were installing MST boxes behind their company truck on the side of the road when a car traveling in the same direction struck both employees. One of the employees was hospitalized with a broken left femur.,1
"An employee was trying to enter an elevator when the elevator door came down and hit the employee's head. The employee's hard hat was knocked off and the employee fell backwards into an open, metal-grated stairwell. The employee suffered head lacerations, hip bruises, and leg bruises, requiring hospitalization.",1
"An employee was using a forklift to empty an aluminum scrap hopper. He exited the forklift and walked under the elevated hopper. His left hand was on the fork as he struck the lever that dumps the hopper bin. 

When the hopper dumped its load, it created a pinch point between the hopper and the forklift forks. The employee's left fourth digit was caught between the hopper and the forklift and had to be surgically amputated.",1
"An employee was working on a loading dock when she slipped and hit her head on a mobile rack, requiring hospitalization for a head injury.",1
"An employee was operating a backpack vacuum cleaner when the vacuum's power cord was severed, causing an electrical spark that shocked his left leg.",1
"On August 24, 2017, an employee was exposed to sulfuric acid vapors while adding water to a sulfuric acid tank, requiring hospitalization.",1
"An employee was checking a skid steer for a hydraulic leak. When he started the skid steer, it pushed him 10 feet away. He was then pinned between two pieces of rolling stock, fracturing his left leg.",1
"While standing on a pole scaffold platform and cleaning a potable water tank, an employee fell approximately 48 inches from the scaffold platform to a lower platform. The employee was hospitalized with head trauma.",1
An employee was moving material with a standup forklift when the employee lost control of the forklift and was pinned between it and a pallet rack. The employee suffered a fractured pelvis.,1
An employee had loaded boxes of food items onto a truck lift gate and was lowering it when he fell approximately 4 feet off the gate to the ground. He suffered a hairline fracture to the left ear area and was hospitalized overnight.,1
"On August 24, 2017, an employee was attempting to close a gate when his right pinky finger was caught in the gate's roller, lacerating and amputating his fingertip.",0
An employee was operating a labeling machine when the employee's fingertip contacted moving parts and was amputated.,0
"An employee was using an industrial drill press to add a 1"" hole into aluminum castings. As he was removing the casting from the work surface, the glove on his right hand was caught by the rotating drill bit, pulling his little finger on to the cutting edge of the bit. His right little finger was amputated between the end of the finger and the base of the nail, above the first joint, with bone loss.",0
"An employee was using a food processor to cut potatoes when the machine jammed. As the employee was trying to remove the jammed potato, the processor's rotating plate struck and amputated the employee's fingertip.",0
An employee was replacing the worn paddles of an airlock on a platform. A coworker on a platform 60 feet away jogged an airlock on his platform and inadvertently hit a second button that started the airlock on the employee's platform. The employee's left hand was then amputated between the airlock paddle and a wear bar.,1
An employee was underneath a residential home installing an HVAC plenum when his right hand made contact with an exposed energized electrical wire. He received an electrical shock and sustained burn injuries to his right hand and chest.,1
"An employee was helping a patient to get a wash cloth when she tripped over a floor mat and fell, breaking her hip. She was hospitalized.",1
"An employee was walking near the nurse's station when she slipped on water, fell to the ground, and broke her pelvis.",1
"On August 25, 2017, at approximately 3:45 PM, an employee was working on a conveyor. The conveyor was turned off and locked out to perform the maintenance. The conveyor was then turned back on and the employee was attempting to get up when his right index finger came in contact with the conveyor chain and sprocket, amputating/avulsing his right index fingertip.",0
"An employee fell to the ground while suspended from a sprayer boom, suffering a concussion, two broken teeth, fractured bones around the sinuses, and a sprained wrist.",1
"While performing maintenance activities, an employee began to feel ill, vomited, and sweated profusely. He started to have involuntary muscle spasms and difficulty speaking, requiring hospitalization for dehydration and other heat-related symptoms.",1
"An employee was climbing off the bed of a pickup truck when she missed a step onto the tailgate and fell to the ground, breaking her left hip, left femur, and left wrist. She was hospitalized.",1
"An employee was helping to repair an automatic welder when the operator cycled the machine, which amputated the employee's left index finger. The machine was not locked out at the time.",0
An employee was washing a cake depositor when the blades amputated his fingertip. The depositor was cycling at the time.,1
"An employee was working with a coworker to build concrete forms that consist of a metal plate and metal rails held together with magnets. They were moving the rails when the magnets pulled the pieces together, pinching and amputating the injured employee's right ring fingertip.",0
"An employee was inside the trailer on the back of a truck. When he was exiting the trailer, he lost his balance and fell to the ground, suffering a head concussion.",1
An employee was unloading a running walk-behind mower from a trailer when the mower blade amputated a portion of his left thumb.,0
"An employee was struck on the head by a falling metal cabinet, suffering a concussion.",1
"An employee was wiring a low voltage wire gauge to the top of a chemical storage tank when he noticed the overhead light mounting bracket was broken. As he touched the bracket, he received an electrical shock and fell 15 feet off the storage tank, breaking three back vertebrae. He was hospitalized. Fall protection was worn at the time.",1
"On August 25, 2017, at 9:00 a.m., an employee was dismounting his grappling excavator when he lost his footing and fell 3.5 to 4 feet to the ground. He suffered kidney pain and was hospitalized.",1
"On August 25, 2017, an employee was attempting to retrieve a dropped tool under a portable power washing machine when the machine was activated. An unguarded drive belt then engaged and amputated the employee's left-hand little finger.",1
An employee was using a table saw when the blade amputated his ring and middle fingers. The saw was unguarded at the time.,0
"On August 25, 2017, an employee was operating a radial arm circular saw to cut a wooden board when the employee's finger contacted the rotating blade, fracturing and lacerating it.",1
"An employee was scraping the top of a machine with a small handheld scraper when the scraper fell into the machine. As the employee was trying to retrieve it, the machine's moving parts amputated the employee's right middle fingertip.",0
An employee was clearing material from a table saw when it partially amputated his left thumb. The saw was running at the time.,1
"An employee stepped into the bight of a wire and suffered a broken right ankle, requiring hospitalization.",1
"An employee was driving an order picker backwards down an inventory aisle. One of the pallets on his lift became caught on an inventory racking, pushing the pallet into his leg and pinning him against the order picker. He suffered lacerations and a right leg sprain, requiring hospitalization.",1
An employee was removing a broken board from a planer machine when the employee's right hand made contact with the side head and three fingers were amputated.,0
"On August 25, 2017, at approximately 11:00 a.m., an employee was operating a table saw when his hand slipped and his left index fingertip made contact with the rotating blade and was amputated.",0
"An employee was standing approximately 20 feet away from a coworker that was hooking up a 6,000 psi sewer jet to clean out a pipeline. When the hose was turned on in the truck, the hose came out of the pipeline and sprayed the employee's chest just below the breast line. The employee was cut and hospitalized.",1
"An employee and a coworker were moving a loader and a coupler, which was on a pallet. They began prepping the coupler to be attached to a hoist's boom. They partially attached the coupler to the boom when the sling broke, causing the coupler to fall down and strike the injured employee's left shin and foot. He suffered metatarsal fractures and tarsometatarsal dislocations.",1
"An employee was cutting lumber with a rough knot saw. The employee was moving planks of wood from a roller when the saw was activated. The saw's guard came down just before the saw blade came up, and the employee's right index and middle fingertips were amputate by the blade or the moving guard.",1
"An employee was using a push bar to move a 260-pound piece of scrap from a 42-inch high table into a scrap bin. The push bar hit another piece of scrap, and the scrap piece rolled off the table and hit his right ankle, fracturing his distal fibula and medial malleolus.",1
"An employee was in an elevated bucket, replacing an electrical pole, when his body made contact with a live electrical current, which entered his body in his elbow and exited out of his chest area. He suffered electrical burns.",1
"An employee was handling compressed gas cylinders using a cylinder cart. The hook used to secure the cylinder to the cart slipped, causing the cylinder to lower onto the cart. The employee's left middle finger was then pinched between the cylinder halo and the handle of the cylinder cart, amputating his fingertip.",1
An employee's right arm was caught and crushed in a machine roller.,1
An employee was burned by hot water while cleaning a tank.,1
"An employee was operating a saw while wearing a stainless steel mesh glove when his glove contacted the sawblade. His left index finger was then pulled into the blade, amputating the fingertip.",0
An employee had just delivered his load and was waiting to pick up an empty trailer when an unknown assailant shot him in the leg twice and in the back once.,1
"On 8/25/2017, an employee was using a wooden stick to unclog a de-seeding machine's blade drum when the rotating blade grabbed the stick and caused the employee's hand to strike the rotating blades. The blade cut all of his left-hand fingers, and several had to be surgically amputated.",1
An employee was putting on his welding gloves when a spider bit his right hand inside the glove. The bite became swollen and required hospitalization.,1
"An employee slipped, tripped, and fell while serving dinner to patients. The employee's head/neck hit the wall, suffering an L1 compression fracture.",1
"On August 25, 2017, an employee was tasked with using a crimping machine to attach terminals to the ends of wires. The employee was able to fit their finger into the area where the terminal is crimped onto the wire end. The employee was attempting to push the wire into the holder to be crimped when the foot pedal was engaged activating the machine and amputating the employee's left index fingertip. The machine was not guarded at the time.",0
"An employee was manually rotating a chipper drum when his left middle finger was caught between the bit and diverter plate, amputating his fingertip. The chipper drum was locked out at the time.",0
"An employee was making fried dough and grilled cheese on a fryer and grill when a can of cooking spray ignited, burning the employee's face and left arm.",1
An employee and coworkers were pouring a concrete floor when the floor collapsed about 18 feet. The employee suffered back and rib injuries and was hospitalized.,1
"An employee was setting up shelves in an elevated work zone when he lost his footing, bumped his knee on a side beam, and fell 6 feet to the ground, fracturing both ankles.",1
"An employee was guiding a section of fracturing iron (straight joint and checksum) as two coworkers were lowering the checksum out of the way. The injured employee's gloved right hand was caught between the straight joint and a wing for a suction hose. The straight joint rolled, allowing employee to pull his hand out of the glove. His right middle finger was fractured and lacerated, requiring amputation.",1
An employee was operating a potato bagging machine when his finger was caught and amputated in the machine.,0
"An employee on an extension ladder had finished removing links from a chain. As he descended the ladder, his foot became tangled on the ladder's rope, and he fell 5 feet 6 inches to the ground. He bruised his right knee and fractured his hip, requiring hospitalization.",1
An employee fell from a ladder.,1
"An employee was frying donuts when she became lightheaded and fell into the fryer's hot oil, burning her right arm and hand. The fryer was uncovered at the time.",1
"An employee was climbing a ladder to exit a cargo hold when she slipped and fell to the rest platform and handrail below, fracturing her right foot and ribs, puncturing her right lung, and lacerating her hip.",1
An employee was using a band saw to cut frozen meat when it amputated his left index finger.,0
"While walking to a work station, an employee stooped down to walk under something and tripped. The employee fell on the right knee, fracturing it and requiring surgery.",1
"An employee was walking down a walking ramp and attempted to avoid a 2- to 4-inch puddle of water by getting on a side rail. She slipped on the side rail and landed awkwardly on her right ankle, breaking it in three places and requiring hospitalization.",1
"An employee was travelling on a forklift when it began to slide on a damp floor. The employee's left foot was then crushed between the forklift and steel bollards, amputating a toe tip.",1
"On August 26, 2017, a box of product fell on an employee's head, causing a concussion and head contusion.",1
"An employee was getting out of an ambulance when a strong gust of wind blew the door closed on the employee's left middle finger, partially amputating it with bone loss.",0
An employee slipped while handling boiling water and was burned by the water.,1
"An employee was making a connection with tongs and cables when one of the cables on the (muffled) drive caught the tongs and lifted them up. He held on to the tongs for approximately 10 feet before he fell to the ground. He landed on his side, fracturing ribs and vertebrae and puncturing a lung. He was hospitalized.",1
"An employee was on the liftgate of a truck, unstrapping a laundry basket for a delivery, when he fell backwards off the liftgate. He lost consciousness and injured his head and ribs.",1
"An employee was walking beside a pallet jack when it jerked toward him, pinning and breaking his ankle between the pallet jack and metal racks.",1
"On 8/27/2017, an employee was cutting meat using a band saw when his left index finger made contact with the blade, amputating his fingertip.",0
"An employee was removing electrical parts from a metal cabinet for salvaging when the cabinet fell and struck the employee, breaking the tibia.",1
"An employee was doing maintenance and housekeeping on a gang saw. When he stepped onto the gang saw's step, his left foot slipped and he fell to the concrete floor, cracking several left-side ribs. He was hospitalized.",1
An employee fell out of a golf cart while driving and struck the ground.,1
"An employee was unloading products from a trailer when he fell off the trailer's lift gate to the ground, fracturing his skull. He was hospitalized.",1
"On August 28, 2017, at approximately 2:00 p.m., an employee was using a table saw to rip a piece of wood for a tabletop. The wood was 45 inches in length and 1 inch thick. While using a push stick, the employee's hand slipped and made contact with the rotating blade, amputating the third finger on the left hand. The employee was hospitalized for surgery.",1
"An employee was climbing a scaffold to mount exterior sheet metal panels when the scaffold fell over on the employee, injuring the employee's lower right leg.",1
An employee was backing up a powered industrial vehicle (PIV) to a pallet when his left hand was caught and lacerated between the PIV and a stationary object.,1
An employee was working inside a 10 to 12 feet deep excavation for the installation of a new underground pipe. He was standing inside the trench box (12 feet high x 8 feet long x 20 feet wide) when the excavation soil sheared off and hit him from behind at the calf level. The dirt pushed him forward and fractured his right ankle.,1
"On August 28, 2017, an employee was loading a steel basket with wheel-end components that needed to be cleaned. When he raised the basket with his hoist, the basket slipped off and crushed his left foot. He was hospitalized.",1
"While performing monthly preventative maintenance and wiping excess grease off a chain, an employee's left hand may have become caught in the chain and sprocket, amputating the second, third, and fourth fingers.",1
"An employee was walking from the back to the front of a machine when he slipped and fell, breaking his arm and suffering a minor cut to his head.",1
An employee was parking a double pallet walker when his left pinky fingertip was caught and crushed between a safety bollard and the hand controls of the double pallet walker.,1
"An employee was removing corrugated paper from a rotary sheeting machine and putting it into boxes when the machine became jammed. While she was attempting to unjam it, her right hand was caught in the feed rollers of the machine, de-gloving the skin and breaking her fingers. All of her fingers had to be surgically amputated. The machine was running at the time of the incident.",1
"On August 28, 2017, an employee was installing a tire carrier through rework, which required inserting a pin into a part. He was inserting the pin when the holes became misaligned and the part moved, pinching and amputating his left index fingertip between the hole and a bracket.",0
"An employee was driving a truck to a work station. She was turning a corner when the truck's back wheel went over the bank, rolling the vehicle. When the truck rolled, her left hand went out of the window and was smashed.",1
"An employee was trying to figure out why the bars were not feeding into an ultrasonic testing machine. A fixed guard was missing and he saw a belt that looked like it was loose. As he was attempting to inspect it, his right hand was caught by the pulley on the machine's belt drive, amputating the flesh on his index fingertip. The machine was not locked/tagged out at the time.",0
"A mechanic was attempting to remove a jammed metering pin from an aircraft landing gear strut with his hands. A co-worker was pressurizing the strut from the opposite end with a pneumatic air hose pressurized at 120psi. The pin dislodged, striking the mechanic and fracturing both arms and wrists. The employee was hospitalized.",1
An employee sustained a fingertip amputation when a bucket of mortar was set down on the employee's hand.,0
"An employee was unloading a load from a truck trailer that had a walking floor. The load would not move, so he climbed in the trailer's doghouse door to inspect the load. The walking floor then engaged, and his leg was caught between the load and the doghouse door. He suffered a possible dislocated hip.",1
"Employees were conducting routine maintenance for corrosion control/rust prevention cleaning of a wellhead. They were needle gunning and removed the bolts on a clamp that keeps the wellhead and oil tree together. When they removed the bolts, it created a pressure gap that dislodged the oil tree. The 2,000-pound tree then fell on top of the injured employee, crushing the employee's torso. The employee experienced difficulty breathing and possible internal, minor bleeding and bruising.",1
An employee was clearing plastic from a rotary airlock when the employee's first right finger was caught and partially amputated in the airlock.,0
An employee was flipping an approximately 100-pound part on a parts tub/table when his finger was smashed and partially amputated between the part and the table.,1
"An employee was climbing up an extension ladder when the ladder's locking mechanism became disengaged and one of the ladder sections slid down and caught his left foot between the rungs. As the employee tried to remove his left foot from the rungs, the ladder began to fall and his left leg became caught between the rungs. He fell approximately 8 to 10 feet with the ladder to the gravel ground below, breaking his left leg.",1
"An employee was registering a patient into the hospital when she suffered a severe allergic reaction to a visitor's perfume, requiring hospitalization.",1
An employee was driving a logging truck when it went off the road and flipped on its side. The employee suffered a broken arm and broken ribs and was hospitalized.,1
"An employee was removing the door of a CNC machine when he slipped and fell onto the machine's conveyor, cutting his left eyelid and requiring hospitalization.",1
"On August 28, 2017, an employee suffered a muscle injury after climbing to the top of a hill on an amusement park ride to retrieve a customer's cellphone. The employee was hospitalized.",1
An employee was removing a gas tank from a vehicle when a work light fell into the flammable liquid and ignited. The employee suffered thermal burns and was hospitalized overnight.,1
"An employee was helping a coworker put an unused wall into a dumpster outside of the office. While standing on the side of the dumpster and guiding the wall inside, the employee lost balance and fell to the concrete ground, suffering a head injury.",1
"An employee was stung by a wasp while working in the yard, suffering an allergic reaction.",1
"An employee was preparing to load a utility pole onto a truck. When the pole shifted, the employee tried to move out of the way and tripped and fell breaking a bone in the leg.",1
Two employees were placing cable while working from a line truck with an attached reel carrier. The injured employee was observing the reel as it was taking in pulling tape when the reel bar came around and smashed his left hand between the lifter and the bar. His thumb was injured and required surgery.,1
An employee suffered a heat-related illness while installing plumbing.,1
"An employee was climbing a scaffold when it collapsed. The employee fell onto the ground and was struck by falling parts of the scaffold, suffering a broken leg and forehead laceration.",1
An employee was working to clear a jam on the grinding machine by manually removing plastic from the chamber of the grinding machine. The rotor of the grinding machine amputated the right middle and ring fingers.,1
"An employee was underneath a disabled tri-axle dump truck attempting to release a driveshaft from the bound-up transmission. When the driveshaft was disconnected and came off, the truck drifted and dragged the employee who was making the repairs. The employee was hospitalized and suffered a broken collarbone, four broken ribs, and a bruised kidney.",1
"An employee was checking the steel coil stock inventory received via railcar. The employee's left foot slipped off the railcar platform located 47 inches above the paved concrete yard. The employee landed on their left leg, fracturing the femur.",1
"An employee fell off a scaffold while installing insulation, suffering a broken hip and heel.",1
"An employee was inspecting a barn door that would not open. He climbed 4 feet up a ladder, lost his balance, and fell to the ground, landing on his left side. He suffered three cracked ribs and a deflated lung, requiring hospitalization.",1
"On 8/29/2017, at approximately 3:15 PM CST, an employee and a coworker were tightening a nut on a push rod.  The coworker was using a pry bar to pry on a piece of tube steel to take the pressure off the nut and make it easier for the employee to turn. The bar slipped and pinched the employee's right index finger, avulsing it and partially amputating the fingertip without bone loss.",0
An employee suffered burns to their arm from an electrical distribution panel while replacing an overcurrent device. The panel was not locked/tagged out at the time.,1
"An employee was driving a pallet jack down an aisleway when she lost her balance and stumbled. Her legs went outside of the pallet jack, which then drove over and broke her right leg.",1
An employee was dragging cut tree limbs to a chipper when he became dizzy and cramped up. He was hospitalized for heat-related illness.,1
An employee was struck by a vehicle driven by another employee.,1
"An employee was attempting to reposition the fork on a telehandler. His right pinky finger was between the fork and the mounting bracket when the fork shifted and swung back, crushing his pinky finger.",0
An employee was evaluating an electric air compressor. He removed the housing for the fan and put his hand by the fan to feel for air flow. The compressor was running at the time and the employee's hand was hit by the fan blade. The employee suffered a partial amputation of the right index finger.,0
"While cutting weeds along the road, an employee started vomiting and seizing due to dehydration and the heat.",1
"On August 29, 2017, at approximately 7:45 p.m., an employee got out of his truck and was walking around investigating a power outage when his hands contacted an energized, 7,620-volt powerline. He received an electrical shock and was hospitalized.",1
"On 8/29/2017, an employee was on the lift gate of a truck unloading garbage when he lost his balance and fell off the truck, injuring his ribs and clavicle.",1
An employee was traveling on a powered industrial truck from a dock door to an aisle when the employee struck another powered industrial truck. The employee suffered broken ribs.,1
"An employee was struck by a metal food cart while standing in front of a coffee station, falling to the ground and suffering a back injury.",1
An employee was installing insulation from a step ladder when the ladder tipped. The employee fell to the floor and broke the left hand.,1
"An employee was securing concrete wall blocks on a step-down trailer. As he was throwing a chain over the load, he lost his footing, fell to the lower deck, and then hit the ground. He broke his hip and was hospitalized.",1
"The employee was walking and stepped on a bin top cover which shifted, causing the employee to fall forward and strike his face on the tripper rail and a piece of conduit. The employee sustained a fractured eye socket/cheek bone.",1
"On August 29, 2017, an employee was loading material into an industrial shear when the material retention clamp closed on and amputated the employee's finger.",0
"An employee was removing boxed chips on a moving conveyor when his left index finger went into an opening between the guardrails, amputating his fingertip.",0
"An employee was at a conveyor with a piece of end protector paper strip in his left hand. The paper strip became wrapped around the powered conveyor roller and his left arm was pulled into the conveyor, fracturing it.",1
"A crew was offloading T-wall panels using a spreader bar and a loader. Two employees were assisting with the rigging while the loader operator positioned the loader. While the employees were connecting the second piece of rigging, the tension from the rigging attachment gave way, causing the spreader bar to strike the injured employee's hands, fracturing the left index and middle fingers and dislocating the right thumb.",1
"An employee was cleaning a saw when it grabbed his sleeve and pulled his left hand into the spinning blade, cutting it. The blade was guarded at the time.",1
"While walking, an employee was struck by an order picker. His left 
foot went under the right-front corner of the bumper plate. The forklift stopped immediately and the injured employee was able to pull his foot out from under the truck and was taken to the hospital. Surgery was performed to reset broken bones and reattach
 ligaments in the foot.",1
"On 8/29/2017 at 12:50 p.m., an employee was pouring concrete at a construction site when he became ill and later started sweating profusely and had shortness of breath. He was hospitalized for possible heat stress or heat stroke.",1
An employee was operating a punch press when it amputated his fingertip.,0
"An employee was on a boat house ladder, attempting to hand tools to a coworker on the roof, when the employee fell off the ladder, suffering head and back injuries.",1
An employee's right index and middle fingers were caught and amputated between model-C slips and annulars.,0
"An employee was moving a pump jack when an aluminum pump jack pole slid and hit his head, knocking him unconscious and bruising his head.",1
An employee was setting down a bundle of tubing with a radio-controlled overhead crane when a tube shifted and caught/pinched three fingers on his right hand.,1
"On August 30, 2017, an employee was painting from an extension ladder when the ladder slipped out and the employee fell, breaking the left arm and leg. The employee was hospitalized.",1
An employee was injured when a tractor loader tipped over and pinned him against the ground fracturing ribs.,1
An employee's middle finger was pinched between two logs. The right middle finger was amputated to the nail area.,1
"On August 30, 2017, at approximately 2:15 p.m., an employee was transitioning a process air compressor from the vertical to the horizontal position when the employee's fingers were caught between the compressor's round housing and the internal tube section, amputating the left ring finger above the first knuckle and the left pinky fingertip.",0
"On August 30, 2017, at approximately 2:30 p.m., an employee was mowing grass with a standup mower when it ran over a portion of the employee's right foot, amputating three toes.",1
"An employee was leaving the facility and walking along a wheelchair ramp when she tripped forward and hit the concrete, striking her right hand and the right side of her head. She was hospitalized with a broken right wrist and forehead contusion.",1
"An employee was struck by a steer and fell to the ground, fracturing his right arm.",1
"An employee tripped on a rug in front of the locker room and fell to the ground, breaking her left humerus.",1
"An employee was moving heavy freight when it smashed his right hand, amputating the middle and ring fingers.",0
An employee was pulling an unloading device down a belt when it crushed and lacerated his right hand.,1
"An employee was ripping wood with a table saw when his fingers contacted the blade, cutting his right middle and pointer fingers. He was hospitalized.",1
"An employee's left leg was struck by a bundle of steel that rolled off a timber, causing a compound fracture.",1
"An employee was using a skimming bar to remove slag from the top of a ladle of molten iron when the molten iron (2,600 degrees) poured down and burned his left leg and foot.",1
"On 8/30/2017, an employee was collecting vegetation waste with a rear load packer truck when he began to feel pain throughout his body. He overheated and experienced muscle cramps.",1
An employee was caught in a spooling machine and severely injured both legs.,1
"An employee was starting to unload equipment from a trailer. The employee released the bar holding the trailer ramps up when the hydraulics failed, causing the ramp to fall on the employee. The employee suffered a head laceration, three broken ribs, a collapsed lung, and a lower back injury.",1
"An employee was walking through a warehouse when a forklift operator reversed the forklift over the employee's left foot, removing skin and partially amputating the foot.",0
"An employee was descending from a ladder into a railcar. He pulled his retractable lifeline out so when he hopped down the last step, the automatic stopping mechanism would not engage on his personal fall arrest system. When he jumped, the arrest system still engaged and pulled his body back, causing him to land on and twist his right foot. His right ankle broke and required surgery.",1
"An employee's right thumb was bitten by a timber rattlesnake, requiring hospitalization.",1
"An employee was using a tire machine to remove a tire from a rim when the machine suddenly reversed, causing the tire removal bar to pinch and amputate the employee's left pinky fingertip.",0
An employee had been rinsing out the mixer and his left thumb went into the mixing area resulting in amputation above the top knuckle. The machine was guarded at the time.,0
An employee performing agriculture work in a field was found unresponsive and hospitalized on 8/30/2017 due to an asthma attack.,1
"An employee stepped on an unsecured hole cover and fell into a 12-foot-deep window well, breaking his left tibia and fibula and injuring his head.",1
"On 8/30/2017, an employee was cutting wood using a power saw when it kicked back and cut his thumb.",1
"On 8/30/2017, an employee was repairing a roof when he fell off, fracturing his heel.",1
"An employee was standing next to a roller table during steel fabrication activities. A steel joist was standing vertically when another joist struck it, knocking it off the roller table. The joist fell on the employee's left foot, injuring it and requiring hospitalization.",1
"An employee was in a box truck and went to pull a wood pallet that was loaded with material towards the truck gate. While pulling the pallet, the wood broke causing the employee to fall backwards off the truck and land on his back.",1
"At approximately 9:15 a.m., on 8/30/2017, an employee was bending three pieces of rebar when the employee's right index finger was smashed between the rebar. The finger had to be surgically amputated at the first knuckle.",0
An employee slipped and fell on wet ceramic floor tiles that had just been mopped. She fell on her wrist and injured her hand.,1
An employee was walking along a loading dock when a forklift drove over his left ankle and broke it. He was hospitalized.,1
"An employee slipped and fell, hitting her eye on a doorknob as she fell. She injured her eye/retina and was hospitalized.",1
"An employee was using a torch to disconnect a pipe and remove an HVAC compressor when residual oil inside the pipe ignited, causing first and second degree burns to the left side of the employee's face, arms, hands, and left thigh, as well as lung irritation. He was hospitalized.",1
"On August 30, 2017, an employee was helping coworkers unload a cabinet from a truck and onto a ramp when he fell off the side of the ramp and struck the ground, injuring his collarbone and ribs.",1
"An employee approached a fillet machine when it grabbed her glove, catching and severely lacerating her hand. She was hospitalized.",1
"On 8/30/2017, an employee was painting from a ladder when he fell approximately 11 feet, dislocating his shoulder and hip.",1
"On August 30, 2017, an employee was unloading concrete barriers from the back of a flatbed truck when the employee's left middle fingertip was caught and amputated between the lifting device and a barrier.",0
An employee slipped in the restroom and injured her hip.,1
An employee was walking to her car and tripped over a speed bump. The trip resulted in a dislocated shoulder and hospitalization.,1
"An employee turned around and tripped over a vital signs monitor that was behind her, fracturing her right leg.",1
"On August 30, 2017, an employee was cleaning out/blowing down a rotary airlock when the airlock caught and amputated his left middle and index fingers. The airlock was not locked/tagged out at the time of the incident.",1
"An employee was washing a running dicer machine with water when the machine unexpectedly turned off. The employee's hand was inside the machine attempting to turn it back on when the machine engaged, amputating the employee's right ring fingertip.",0
An employee was delivering mail when he was shot by an unknown assailant in the right neck/jaw area and left wrist.,1
An employee experienced heat stress and dehydration while on patrol for drug smuggling activities.,1
An employee was adjusting a packing machine when the machine cycled and amputated his right ring fingertip to the first knuckle. The machine was energized at the time.,1
A temporary employee was using a knife to remove a can label when the knife slipped and punctured his abdomen.,1
An employee was driving on the highway when his service truck rolled over. He suffered bodily bruising and lacerations.,1
An employee was compacting garbage in a garbage truck when the compactor blade cut the employee's left upper arm.,1
"An employee was attempting to cut a 55-gallon drum when the drum exploded, fracturing the employee's left arm.",1
"An employee's left thumb was caught in the closing tailgate of his truck, amputating it at the first knuckle.",0
"An employee was operating a backhoe to clean fuel bunkers when a backhoe attachment broke through the back window of the operator's cab and struck the employee. The employee was found unresponsive with head and face injuries, requiring hospitalization. The employee suffered a concussion, a broken orbital bone and a laceration.",1
A temporary employee was pushing a metal cart that was filled with wire when his left ring finger was lacerated and crushed in a pinch point between the cart and an adjacent sine drawing machine. He required surgery.,1
"An employee was making a bed. As she was moving around the bed, her foot became caught around the cord for a fetal monitoring machine. She fell and fractured her left femur.",1
An employee was installing a new door on a machine when the door actuated while the employee was checking the operation. The door lacerated the employee's face and broke the employee's jaw.,1
"An employee was walking beside a piece of 4-inch pipe on jack stands while a coworker was pushing the wind block. The wind block hit the pipe on the jack stand, causing the pipe to fall and strike the employee, who suffered a broken left leg.",1
An employee was driving a standup forklift and got their left foot caught between the pallets and the exterior of the forklift resulting in lacerations and broken metatarsals.,1
"An employee was installing drywall on a wall next to a door opening when the door closed on his middle finger, amputating his fingertip.",0
Two employees became nauseated and began vomiting after unloading chemicals from the truck. One employee was hospitalized.,1
"An employee was performing maintenance on two auger conveyors when the conveyor cover fell off and struck a pot of hot fat, which had a magnetic cover, 4 to 5 feet below the employee. The metal band/lock around the magnetic cover broke, allowing the pressurized fat to spray out and contact the employee, who received second and third degree burns, primarily on the lower legs.",1
An employee was unloading equipment from a work vehicle when his heart began beating rapidly.,1
"An employee was using a forklift to dump trash. The employee exited the forklift, which then pinned him, breaking his ribs and shoulder blade and puncturing his lung.",1
The injured employee was cleaning in the mill room and was standing on top of a guardrail on a platform. A forklift operated by another employee struck the platform and the injured employee fell 6.5 feet from the guardrail he was standing on to the mill room floor below. The employee fractured both heels and the left ankle.,1
"An employee was holding a 4x4 piece of wood against the wall of a vessel while a forklift operator placed a bundle of zinc ingots alongside the wood. The forklift operator went too far into the bundle, which caused the forklift blades to push against the 4x4, smashing and partially amputating the employee's right thumb.",1
"An employee was unloading a piece of pipe from a dump truck when the truck moved forward and he slipped. As he slipped, he gave a stopping motion to the driver. The driver stopped suddenly, and the truck tailgate came down and amputated the employee's right pinky finger.",0
"An employee was using a cutting wheel to open a crate when a piece of the wheel broke off and struck his ankle, requiring hospitalization and surgery.",1
"On August 31, 2017, an employee was sitting on a riding lawn mower when the employee's right pant leg caught the edge of the mower deck, which then pulled the employee's right foot into the blade, lacerating it and requiring hospitalization.",1
"An employee was changing a saver sub, using a sling around a grabber box, when the rating tag on the sling was pinched under the grabber box. The employee was using a wrench to try and pry out the rating tag when the grabber box fell and caught the employee's fingers, amputating the first digit of the right middle finger.",0
"An employee was removing an air conditioning unit from a wall when he dropped an envelope in the unit. As he attempted to retrieve the envelope, the unit's fan blade deeply lacerated his hand, requiring surgery.",1
"A crew was lifting a concrete power pole off a pole trailer to verify the lifting point was in the proper position. The injured employee's hand was on an insulator that was attached to the pole, checking for balance, when the pole shifted and caught his right pinky finger between the insulator and a bolt on a second pole that was on the trailer. His finger was fractured between the main and middle knuckles.",1
"An employee was checking a water leak in a house stairwell. The employee went below the stairwell and was standing on the landing when the floor gave way. The employee fell a couple feet, fracturing the right foot and left tibia.",1
"An employee was carrying a sandbag when the employee lost their footing and fell to the same level, suffering neck pain and a shoulder sprain/strain.",1
"An employee slipped on a wet surface while performing pool maintenance and fell into the pool, fracturing the left leg.",1
An employee was trimming tree branches when a tree behind him fell on and crushed him.,1
"An employee was repairing a balancer that had a broken pin when the high-tension springs released and the unit fell on his left index finger, amputating the soft tissue on his fingertip.",1
"On September 1, 2017, an employee was riding in a golf cart after working the concession stand at a football game. While in the seat, she was seen kneeling over and then fell to the ground where she hit her head, fracturing her skull.",1
"An employee was operating a punching press to punch out aluminum parts when the press repeated and struck the employee's left index finger, lacerating it and requiring hospitalization.",1
"On September 1, 2017, at approximately 2:01 p.m., an employee was operating a press machine when the employee's fingertip was caught and amputated in the machine.",1
"On September 1, 2017, a temporary employee fell through a hole from the second floor to the first floor, suffering a head injury and brain swelling. He was hospitalized.",1
"An employee was using a portable grinder with a wire brush wheel to clean a metallic natural gas pipe in preparation for welding. The flow of natural gas had been stopped with a metallic stopper pin. As the employee was using the grinder, the stopper pin became dislodged from a seated position, resulting in a brief ignition of the natural gas. The employee suffered first and second degree burns to the right side of his face and nose.",1
"An employee was moving a storage trailer toward a dock when the trailer tipped on a hill. The cab then went into the air and fell down with the trailer. The employee suffered two vertebrae fractures, one tailbone fracture, and one shoulder blade fracture. He was hospitalized.",1
"An employee was working on a shrink wrapping machine when the side seal became wrapped around the seal bar. As the employee was trying to remove the side seal, the machine's blade cut and amputated the employee's left index fingertip. The machine was guarded at the time.",0
"An employee and a coworker were removing a 7-inch pipe from a rack when the pipe fell from the rack and struck the employee's left hand, amputating the middle and ring fingers.",0
An employee was operating a forklift to move pallets. He was attempting to adjust the forklift mast chain when it amputated his middle and index fingertips.,0
"An employee and a coworker were lifting a foot cart over a step when the cart shifted and pinned the employee's right pinky between the cart and the ground, amputating his fingertip.",1
"An employee suffered an asthmatic reaction and had difficulty breathing after walking by a hallway that was being waxed, requiring hospitalization.",1
"On September 1, 2017, an employee was nailing wooden trusses using a nail gun. As the employee went to kneel down, the nail gun fired a nail into his right knee, requiring hospitalization.",1
"An employee was working on a die machine when the die fell out of the machine and struck the employee's knee, causing bruising and swelling.",1
"An employee stumbled while walking on a wheelchair accessible ramp to go into the building, tearing his right shoulder.",1
"An employee was trimming weeds near a creek bed when he lost his footing and fell approximately 15 feet into the creek bed, breaking his left wrist, three ribs, and two thoracic vertebrae.",1
"On September 1, 2017, an employee was standing and waiting for a silo to empty when a piece of angle iron fell from above and struck the employee's hand, amputating the thumb tip.",0
"While employees were loading a shipping container with 2,200-pound tote bags of peanuts, an employee walked into the container to place a slip sheet on the floor. Before the employee exited the container, a forklift operator drove a forklift with a loaded tote bag into the container. The forklift set the tote bag down on the employee's leg, fracturing the leg, ankle, and toes. The employee was hospitalized overnight.",1
"An employee was descending into a tank using a permanent fixed ladder when he received an electrical shock, which caused him to lose his grip on the ladder and fall. He fell approximately 20 feet and struck a platform. He then bounced off the platform handrail and fell another 8 feet to the bottom of the tank, suffering shoulder, rib, and back injuries.",1
"While standing on a freezer ladder and removing items from a second-level shelf, an employee fell back and struck the floor, suffering a head injury that required hospitalization.",1
"An employee was working on a machine. Her hand was on the rubber belt trying to make it engage and run. The belt began to run, catching and cutting her left ring fingertip, which had to be surgically amputated. The machine was not guarded at the time.",0
A temporary employee was moving a metal cabinet when his left pinky finger was smashed between the cabinet and a forklift tine. His finger had to be amputated.,0
An employee was operating a skinner machine when the blade avulsed her left thumb.,1
An employee was manually rotating the blades of a grinder machine to clear plastic out of it after a power outage when the blades partially amputated his left thumb.,1
"An employee was raking ashes from a fire box when a blowback occurred, forcing flames out the door, which burned both of the employee's forearms and hands.",1
An employee was installing a pump at a remote site when he lost control of the pump. The pump then hit and amputated approximately 1/2 inch of his right middle finger.,0
"An employee was using a produce bagger machine to fill sacks with potatoes when the machine's pneumatic clamp crushed the employee's left pinky finger, requiring amputation without bone loss.",0
"An employee was feeding rubber into a rubber mill machine when his glove became stuck on the rubber. His gloved hand was then pulled into the rollers, partially amputating his left thumb tip and the second joint of his left index finger.",0
"An employee lost his grip and fell from a ladder rung as he was climbing a scaffold, breaking two ribs.",1
"An employee was attempting to remove a jammed box from a machine. When the box was removed, the machine moved and pinched/amputated the employee's right middle fingertip.",0
An employee attempted to get on his pallet truck to go in reverse when the handle swung out and caught his hand between the handle and the steel shelves in the perishable department causing approximately 3/25 inch tip of the pinky finger to be amputated.,0
"An employee was making a bracket on a power press when his left hand contacted the moving components in the press, partially amputating his index fingertip.",1
"An employee was at a construction/demolition site when he sat down on a piece of plywood that was covering a hole in the floor and fell through it. He contacted the floor below and suffered head trauma, requiring hospitalization.",1
"An employee was cleaning a machine chain with a rag when the rag became caught in the chain, pulling it and the employee's left index finger into the chain. His finger was amputated to the second knuckle. The machine was unguarded at the time.",0
An employee was lowering a scaffold when the employee's left-hand palm was impaled on the scaffold lever.,1
"While climbing down a secondary ladder in a water tower, an employee fell approximately 30 feet to a platform, breaking two vertebrae, puncturing a lung, and breaking a foot. The employee was hospitalized.",1
"An employee slipped on a wet concrete floor that had just been washed, fracturing her ankle.",1
"An employee was in a harvester cutting a pine tree when the tree came down over the back of the harvester and struck him. He suffered three broken ribs, a broken left arm, and a concussion.",1
"An employee was grinding a piece of metal (large socket) on a bench grinder when the piece of metal became caught and dragged his right index finger into the grinder, partially amputating it.",0
An employee was lifting boxes of retail merchandise off of a cart and felt pain in her back. The employee suffered a back injury requiring hospitalization.,1
"An employee was pulling an engine block onto a steel plate when the employee's left hand was caught in the path of the moving engine block, amputating the middle fingertip.",0
"While descending a ladder from a roof, an employee slipped and fell 16 feet, requiring hospitalization.",1
"An employee was operating an electric pallet jack. His left foot was off the platform when he ran into a roof support pole. He suffered a severe left foot contusion and laceration and broke a bone, which resulted in a toe amputation.",1
"On September 2, 2017, an employee was adding chlorine tablets to a swimming pool when he inhaled chlorine vapor. He suffered respiratory/lung distress and was hospitalized.",1
Employees were driving on a lease road and hit a bump. The employee in the back seat struck his head on the ceiling of the van. The employee was admitted for a concussion.,1
A firefighter was working out and performing regular daily exercises under the firefighting physical fitness program when he suffered a muscle injury and was hospitalized.,1
An employee was working on a valve when the valve closed on and amputated one of the employee's right fingertips.,0
An employee was cleaning kitchen knives when a knife punctured his abdomen.,1
"An employee was walking through a furnace pit when the furnace trough kicked back. The employee then stepped back into a mold full of molten metal, suffering second degree burns to the right ankle and calf and to the left foot.",1
"On September 3, 2017, an employee was driving a pallet jack down an aisle. At the same time, a coworker was dropping a plastic pallet onto another pallet. The plastic pallet bounced up and struck the backrest of the employee's pallet jack, then pinned his lower right leg/ankle between his jack platform and the pallet. His right ankle broke.",1
"While stepping out of a pickup truck to purchase gasoline, an employee slipped off the running board and fell to the ground. The employee dislocated an ankle and had surgery.",1
"An employee was aligning a draw bar on a gate ladle when his alignment tool twisted and pinched his right ring finger between the tool and the ladle, partially amputating it.",1
"An employee was removing a bird from the bird chiller machine when the employee's right arm above the elbow was caught in the machine, fracturing and lacerating the upper right bicep. The employee was hospitalized. The machine was not locked/tagged out at the time.",1
"On September 3, 2017, an employee was observing a coworker running a cash register when she stepped back and fell off a step, breaking her leg and requiring surgery.",1
"An employee was performing maintenance and replacing an equipment pump. The employee turned the pump on and opened a valve, which resulted in liquefied sugar spraying onto a product tank and then splashing onto the employee, causing burns.",1
"An employee was lowering a well pump down a well shaft when a 1/2-inch cable snapped and whipped back up, striking the employee. He suffered lacerations to both hands and bruising on the chest, requiring hospitalization.",1
An employee was attempting to exit a facility through a turnstile when her knee gave way. She then twisted and fractured her ankle.,1
"On September 4, 2017, an employee suffered an infection after processing raw poultry, requiring hospitalization.",1
An employee lost his balance and fell to the ground while transitioning from the top of a porch into a man lift. He injured his back.,1
"An employee was setting up a machine using a rubber, 10.5-pound hammer, when the hammer smashed his left thumb, lacerating and fracturing it.",1
"An employee was using a pallet jack when she fell backward and struck her head on the floor, suffering a head bump.",1
"An employee fell from an extension ladder while inspecting a box truck, suffering two vertebrae fractures, fractured ribs, and a forehead laceration.",1
"On 9/04/2017, at approximately 6:30 a.m., an employee was attempting to remove a plastic roll core from a machine when the machine's extractor arm moved the roll, causing it to pinch his right index finger. His finger had to be surgically amputated up to the first digit.",1
An employee was trying to light a propane grill when a propane explosion occurred. He suffered second and third degree burns and was hospitalized.,1
An employee was working at a wellsite when his right little fingertip was amputated.,1
"An employee was driving an excavator when the vehicle rolled off the road. The employee suffered fractured vertebrae and ribs, as well as an arm injury.",1
"An employee was struck by a loose rock while monitoring recreational hikers/climbers. The employee then fell approximately 70 feet, suffering a concussion and collapsed lung.",1
An employee fainted in a stock room. The employee's head struck a cart and was lacerated.,1
"An employee was opening a high-pressure relief valve with a pressure bar. He was pulling down on the bar when it gave way, causing him to fall on the second bar. He tore his left triceps and bicep.",1
"On Septembers 4, 2017, an employee was cleaning a conveyor belt when it amputated his right thumb tip. The conveyor belt was running and unguarded at the time.",0
An employee slipped and fell while entering an elevator that was uneven with the main floor. She broke her left arm.,1
An employee finished a roofing repair patch at a completed installation and was descending from the roof using a permanent ladder when he slipped and fell 12 feet to the ground. He fractured his right foot and was hospitalized.,1
"On September 5, 2017, an employee working on a residential home fell 10 feet from an A-frame ladder, suffering a head injury and requiring hospitalization.",1
"An employee was changing the rope on a winch line when his left thumb was caught between the anchor on the drum and the frame, amputating the thumb tip.",0
An employee's left middle fingertip was pinched and amputated by a machine.,0
"An employee was using a wrench to adjust a bolt on a conveyor belt when he came in contact with the geared conveyance system, which pulled the wrench away from his hand. His right middle finger was in a circular opening of the wrench handle. When the wrench pulled away, it amputated his fingertip.",0
"An employee was un-decking a trailer and tying up the back when his boot became twisted between the block and chains, causing him to fall backward and hit his head on the trailer. He suffered cracked neck vertebrae and lacerations.",1
"An employee was leading a young horse by a rope to a pasture when the horse tried to escape. He was trying to hang onto the rope when the horse's hind leg kicked him in the jaw, fracturing it. He was hospitalized.",1
An employee was operating a CNC bending machine when the clamp came up and caught his right-hand middle and ring fingers. He had surgery and was hospitalized overnight.,1
"While unloading merchandise for delivery, an employee stepped on an unseated dock plate and suffered a right leg fracture. The employee was hospitalized.",1
An employee was shot in the leg by a disgruntled customer.,1
"An employee had just finished roofing construction on a structure when he fell off a straight ladder and struck the compacted hard soil below, breaking his right leg.",1
"An employee was on the ground balancing a truck load when the truck tire ran over and crushed the employee's right foot, causing a partial amputation.",1
"After emptying trash containers on a rear-load truck, an employee experienced cramping and was hospitalized for heat stress.",1
An employee was using an extendable conveyor and amputated his left index fingertip.,0
"An employee was driving a forklift when he struck a pole and fell from the forklift to the floor, fracturing his hip.",1
"An employee was training coworkers on how to set up a lift. When he pulled the pin on the equipment and moved the support, the lift tipped toward him and landed on his right knee, injuring it.",1
"On September 5, 2017, at 5:45 a.m., an employee was attempting to move a dolly containing a 55-gallon drum when the employee slipped and fell backward, breaking the left hip.",1
"During a simulated building entry procedure, an employee was being dragged out of a building that coworkers were attempting to secure as part of the simulation. One of his coworkers lost his balance and fell on the employee, fracturing several ribs on his right side.",1
An employee was repairing/adjusting an air switch when the switch engaged. The clamps then amputated/avulsed the employee's left ring finger from the base of the nail down. The air switch was not locked/tagged out at the time.,0
"An employee was placing cardboard boxes into a bailer when he became light-headed and sweaty, requiring hospitalization for exhaustion.",1
"An employee fell from a ladder while servicing a refrigerator, suffering a skull fracture.",1
"On September 5, an employee fell approximately 10 feet off a canopy while repairing a roof. The employee suffered a fractured back.",1
"An employee was dumping a chip hopper. His fingers were between the  hopper's box tubing, where the forklift forks pick up the hopper. When he released the dump latch to dump his chips, the weight of the hopper rolling forward caused the box tubing to slam against the forks. This created a pinch point that smashed and amputated his right index and middle fingertips.",0
"An employee was troubleshooting a broken water hose on a cement truck. The employee lifted the charge hoop (chute), which then came down and smashed the employee's thumb between the truck's hopper and drum ring, causing a possible fracture or torn nail.",1
"On September 5, 2017, a temporary employee was operating a press brake, which was being fed by a roll forming machine. During operation, the employee's hands entered the 5-inch gap between the dies. The press then amputated two of his fingers.",0
"An employee was troubleshooting a piece of machinery in the valve area. While he was demagnetizing the machine, his left-hand tendon was cut, requiring surgery and hospitalization.",1
"An employee was driving powered equipment when his leg was caught between the equipment and a nearby electrical panel, breaking his fibula.",1
An employee was attempting to unjam a chicken bagging machine when the machine cycled and amputated the employee's middle finger up to the first joint.,0
"An employee was sweeping the floor around an olive pitting machine when her hand entered the auger chute, which then amputated her pinky finger and lacerated her middle/ring fingers.",0
"On September 5, 2017, an employee parked and was exiting a vehicle when he lost his footing and tripped, fracturing his femur.",1
An employee complained of chest pains and shortness of breath during a training exercise at the fire training research center.,1
An employee was adjusting the conveyor belt when it amputated his right ring fingertip and lacerated his middle fingertip.,0
"An employee was cleaning a cardboard die-cutting machine when his cleaning rag and his hand were pulled into the rollers, amputating fingers.",1
An employee was installing a culter on a frame when the equipment slipped and amputated the employee's finger.,0
An employee was standing at the bow of a barge operating a skid steer by remote control and had his hand resting on the top edge of the barge. The crane operator swung the bucket over and crushed his hand between the bucket of the crane and the barge wall.,1
An employee was holding the bathroom door for a fellow employee when his hand was caught in the door resulting in a partial amputation of the right index fingertip.,1
"An employee was using two hoists to lift a 5-foot section of channel iron that was supporting a 200-pound motor. Hoist hooks supported the channel iron through eyelets. While positioning the hoist, the employee placed his finger through an eyelet. Weight shifted, creating a pinch point between the eyelet and the hoist hook that amputated his finger.",0
"An employee exited a vehicle to speak with a customer and then noticed the vehicle was moving. While attempting to get back into the vehicle, the employee was struck by the door and then run over by the vehicle, suffering tissue damage to the right leg. The employee was hospitalized overnight and had surgery.",1
"On September 9, 2017, an employee was using a table saw to cut plywood when the saw blade broke. Blade tip fragments flew up and struck the employee's face and neck, requiring surgery and hospitalization.",1
An employee was removing fence pieces (platform). He was standing on a smaller fence piece and cut the rope from a large section of fence piece. The large section came loose and the smaller section gave way. He fell approximately 20 feet to ground level (roadway). His PPE was not tied off at the time.,1
"An employee had removed dirt inside a trench using an air hammer. The air hammer was then being removed when it fell on the employee's head, causing a head injury and brain swelling.",1
An employee was pulling plastic to wrap an ottoman when a machine's gate door came down and amputated his left middle fingertip.,1
"On September 6, 2017, an employee was operating a forklift when he hit a pole and fractured his skull.",1
An employee was spotting for a truck driver who was backing up in the truck yard. The driver did not see the employee and pinned him between his truck and another truck nearby. He suffered a collapsed lung.,1
"An employee was inspecting communication cables and fell from a catwalk, sustaining two broken wrists.",1
"An employee was patrolling the hotel premises on an all-terrain vehicle when he hit a slick spot on the road and swerved into a tree, fracturing his right femur.",1
An employee was cutting meat with a meat saw and amputated the left thumb tip and nail.,0
"An employee was standing on an inclined mobile ladder using a pipe wrench to remove a shaft from an auger on a feed haul trailer. The wrench slipped off the shaft, causing him to lose balance and stumble backward down the ladder. He was unable to grab the handrails on the ladder to stop his fall, and he landed on his tailbone on the floor. His head then fell back and hit the floor. He suffered a lower back contusion and a head laceration.",1
"An employee was painting the walls and ceiling in a school room. While descending a 12-foot A-frame ladder, he felt dizzy, missed a step, and fell 8 or 9 feet to the floor, bruising his head, scraping his right arm, and fracturing his right hip. He was hospitalized.",1
"An employee was operating a cartoner when his hand entered the running machinery, amputating his thumb from the tip to the first knuckle.",0
"An employee was riding a tractor mower back to the shop because it was running hot when the mower's radiator exploded. He was sprayed with hot radiator fluid, suffering first and second degree thermal burns/blistering to his face and requiring hospitalization.",1
"An employee was troubleshooting a squeaky motor in a paint room booth. He was pulling the belt with his right hand to make the shaft and motor move. His right middle fingertip was then caught between the belt and pulley. When he attempted to pull his finger out, his fingertip was amputated. The machine was not locked/tagged out at the time.",1
"An employee was helping a coworker guide a metal basket into a tilling tank. The employee's left index finger became stuck in one of the basket holes as the basket brushed against the frame of the machine, amputating the fingertip.",0
An employee was scooping meat out of a stuffing machine tray when his leg pressed against the actuating device. The machine turned on and partially amputated his right ring finger between the first and second knuckle. The machine was not locked out at the time.,1
"An employee and a coworker placed an approximately 52-pound box on a shelf. The box shifted and slipped off the shelf, striking the employee on the shoulder after he had turned his back and was walking away. He fell to the ground and struck his head, suffering a concussion that required hospitalization.",1
"An employee was inspecting a cart when a forklift drove by and hit the cart, which then pinned and injured his lower leg/ankle.",1
"An employee was holding the wing side of a swivel connection in place to connect an iron riser to a wellhead when his right pinky finger was caught between the iron riser and the threaded part of the well, amputating it above the nail.",1
"An employee lifted a four-pack of beer bottles to scan it. The wet bottom gave way, and a bottle fell on her right middle finger, severing the tendons.",1
An employee suffered an electric shock and/or burns on the hands and fingers while installing distribution lines.,1
"An employee was climbing a ladder to access the storage mezzanine and fell off the ladder. The employee was hospitalized for a concussion, inflammation in the abdomen and bruising.",1
An employee's hand was caught between the tailgate and the truck as he tried opening it with his hands. A finger was injured requiring stitches.,1
An employee was placing a stem cutter back on a shelf when it amputated her left middle fingertip.,0
"An employee was working at a station that packs parachutes into canisters. The hydraulic ram on the parachute packing machine initiated out of sequence, catching the employee's glove. She was able to extract her hand from the glove, but not before the end of the ram entered the canister and amputated her right middle fingertip.",1
An employee was installing an elevator and climbing over the elevator mid-rail when he suffered a herniated disc in his back.,1
An employee was walking back from lunch to the worksite when a piece of spiral duct on the rooftop blew down to the ground and struck the employee's neck. The employee suffered a laceration from the neck to the shoulder.,1
"An employee was repairing a sash on a window when his hand slipped and his left forearm contacted the repair tool he was using, lacerating it. He was hospitalized for surgery.",1
"On September 7, 2017, an employee was hoisting a large argon gas cylinder with a chain. As the cylinder was being lifted, the chain started to move and the cylinder shifted. The employee grabbed the valve ring on top of the cylinder and was trying to stabilize it when the first digit of the employee's left thumb was caught and amputated between the chain and one of the ring supports.",0
"An employee was delivering a load to a company. When he opened his truck trailer doors, he was struck by falling pallets with products on them. He suffered hand and neck lacerations and a cervical neck injury that required hospitalization.",1
"An employee was framing the garage roof at a residential home when he fell from an 8-foot elevation, suffering a head injury. He was hospitalized.",1
"An employee was removing a piece of tile from a belt conveyor system when his left index finger was caught in the belt and pulley, amputating it at the first knuckle.",1
"An employee was unloading a hook block assembly. As he was removing the second pin from the hook block, the hook block fell and struck his left leg, crushing it. His leg was amputated above the knee.",1
"An employee was aligning a coil to the guiderails of a mechanical power press' stamping die when the press cycled. The press came down and pinched the employee's left index finger, which had to be medically amputated.",0
"An employee was knocked to the ground by a parked car that rolled down a sloped area, suffering a vertebral fracture, herniated disc, and bruised tailbone.",1
"An employee was trying to pull a 2x4 through a table saw when his left hand contacted the spinning blade, lacerating his index and middle fingers.",1
"An employee was hand-controlling a hoist to bring up a load of bricks when the entire hoist system tipped back and fell on top of him, injuring his back.",1
"An employee was on top of the conveyor belt junction tower investigating some stoppages of a belt when he noticed some debris on a drum pivoting the belt to the tensioner a few floors below. He used a 5-foot pry bar to try to clear the debris from the area in front of the drum. The pry bar contacted a moving surface and shifted, pinching his right middle finger between the bar and either the electrical conduit or an adjacent machine guard. His fingertip was crushed and avulsed requiring surgical amputation.",0
An employee was driving a forklift when his foot became stuck between the forklift step and a stack of plates. He broke his ankle.,1
"An employee's cellphone fell onto a conveyor belt while he was removing a jammed stick from the belt. As he attempted to retrieve his phone, the conveyor caught his right arm, removing flesh from his bicep and scraping his arm from his elbow to his knuckles. He was hospitalized.",1
An employee and coworkers were unloading a utility vehicle when it fell on and broke the employee's leg.,1
"An employee was using a portable cordless drill to prepare tubing for welding when the drill started to slip. When he attempted to catch the drill, the attachment amputated his left index fingertip.",0
An employee's fingertip was caught and amputated in a self-closing door.,0
"An employee was pouring cement when some landed inside his boot, burning his lower leg.",1
"An employee was disassembling a cylinder head with a pneumatic torque wrench when the wrench pinched his left index finger, crushing and amputating the fingertip.",1
"On September 7, 2017, an employee was adjusting a bottle cap removal machine when it amputated the employee's finger. The machine was running at the time.",0
"On 9/07/2017, at approximately 10:30 a.m., an employee was delivering mail when she was attacked by a vicious dog. The dog bit her right arm, wrist, and hand. She was hospitalized overnight for possible surgery.",1
"An employee was cleaning suction holes on a stacker, using a 4.5"" side grinder with a wire brush wheel. While cleaning pitch off the holes, he had the grinder in his right hand and was holding off some belts that were in the way with his left hand when the wire wheel contacted his left thumb. A piece of wire strand became embedded in his left thumb and had to be surgically removed.",1
An employee was cutting wood with a circular saw when the saw kicked back and amputated two fingertips without bone loss.,0
"An employee fell to a different level while coming down a stairwell, breaking bones and requiring hospitalization.",1
"An employee lost her balance while walking over a speed bump and fell in the parking lot, spraining her left knee and requiring hospitalization.",1
An employee slipped and fell resulting in a sprained back.,1
An employee was loading a pallet of material onto a pallet jack and was struck by a forklift that was operating in reverse resulting in a broken left leg.,1
"An employee was carrying a 25-square-foot kitchen granite piece upstairs with a coworker when the stairs broke off from the landing. He then fell about 4 feet to the ground, suffering bruises and a broken rib. He was hospitalized.",1
An employee was adjusting a 6-inch pipe within a horizontal bandsaw when the clamping mechanism caught and injured his right thumb tip.,1
An employee was checking the slack on a mail sorting machine conveyor belt that was moving slowly when his right index finger was caught and amputated between the belt and pulley.,0
"An employee was using a pneumatic chisel to dig though asphalt when the chisel became stuck. He was trying to unstick it when the chisel came loose and caught his right pinky finger between it and the wall, amputating the fingertip.",1
"An employee was using a scissor lift to pull cable. When the employee raised the lift, the employee's ring finger was pinched and partially amputated between the lift guardrail and sheet metal on the ceiling.",1
"On September 8, 2017, an employee was helping to dismantle a scaffold when he stepped backward and fell approximately 6 feet to the ground. He fractured his right ankle and was hospitalized.",1
"On 9/08/2017, at approximately 3:00 AM, an employee was attempting to clear a jam in a rotary die cutter when her right hand was drawn into the cutter rollers, breaking several fingers. She was hospitalized.",1
"On September 8, 2017, an employee was clearing a machine jam. Once the jam was cleared, the machine cycled and caught the employee's left fifth finger in a pinch point, partially amputating the fingertip.",0
"An employee was working on a crane when an employee from another company charged a melting pot. The charge was higher than expected, which caused the melting pot fire to go into the roof and burn the employee.",1
"An employee was walking past a parked truck when four pipe joints fell off the truck and struck his back, fracturing it.",1
An employee lost her footing and fell fracturing the right hip.,1
An employee was replacing a power steering belt when his fingernail was caught and ripped off by the belt.,1
An employee was repairing a hand line irrigation system when a riser blew and hit him in the face.,1
"While moving a crane trolley wheel from a catwalk onto an extendable boom lift, an employee suffered back pain and was hospitalized.",1
An employee was flipping a part over using a hoist and a chain sling when his right pinky fingertip was caught and amputated between the part and the chain sling.,0
"An employee tripped and fell over rebar that was on the ground, breaking his right ankle.",1
An employee was making parts on a press brake and amputated their right thumb tip.,0
"An employee was clearing a clog in a rotary kiln's discharge hopper when hot debris splashed onto his fire-resistant clothing and then into his boot, burning his right foot. He was hospitalized.",1
An employee was attempting to clear a jam in a conveyor system when the chain and sprocket partially amputated the employee's index finger.,0
"An employee was welding on a steel casing pipe while laying on the ground. One pipe was on the bucket of a backhoe when hydraulics settled on the backhoe, causing the pipe to roll off the backhoe and onto the employee. The employee sustained a broken pelvis, internal bleeding, and a contusion to the left leg.",1
"An employee was picking up trash at a construction worksite when he stepped in a hole and tripped, dislocating his right ankle.",1
"An employee was using a pressure washer to wash a drilling rig when the washer hose became twisted. As the employee was untwisting it, the pressure washer ran over his boots, causing hot water to burn his foot and debris to enter his left middle toe. He required surgery to remove the debris.",1
An employee was leaning over a rotating strapping dispenser to plug in a fan when he was struck by the rotating steel strapping. The resulting injury required surgery.,1
"An employee was using a utility knife to notch out sections of a composite trim when the knife slipped on the hard surface of the trim and struck the employee's left forearm, severing an artery and cutting veins. He was hospitalized and had surgery.",1
"An employee was throwing scrap metal into a bin when the metal bounced back and pinched the employee's left pinky finger between the metal and the bin, amputating the fingertip.",0
"An employee was stacking crates at a grocery store. She was stepping off a pallet when she slipped and fell to the floor, breaking her right femur and requiring overnight hospitalization.",1
"Employees were placing a water line for the city when one of the employees stepped outside of the trenching box. The earth collapsed around him, fracturing his lower vertebrae.",1
"An employee was nippling up a blowout preventer at a drill site when the employee's hand was caught between a blind ram and 4-inch gauge sealer valve, crushing the right pinky finger. The employee's pinky finger was amputated.",0
"An employee was removing a boom from a forklift when the boom fell and struck his arm, tearing his bicep. He was hospitalized.",1
"An employee was inspecting finished lightbulb products in a cardboard box at an inspection station. The inspection station was on a work platform that is 33 inches wide, 8 feet long, and 9 inches high. The employee finished inspecting the parts in the cardboard box and turned to go get another cardboard box full of light bulbs. As she turned to step off the platform, she fell to the ground and injured her hip, requiring hospitalization and surgery.",1
"An employee was attempting to replace a gasket in a valve on a separator trailer when he fell and struck a tire rim that was on the ground, breaking ribs and suffering spleen damage.",1
"An employee was repairing a hydraulic lift that is used to dump totes. While working on the tote lifter, the lift came down onto the employee's leg and fractured it. The employee was hospitalized.",1
"An employee was stacking pallets when a nearby forklift operator reversed and struck the employee, who suffered lacerations to the right heel and ankle.",1
An employee was working in an electrical substation when a cable snapped and struck the employee on the shoulder and the side of the head. The employee suffered bruising.,1
"An employee was laying on his back on the floor, welding on a valve, when another valve opened and dumped hot water on him. He suffered second degree burns on his chest, side, and right arm, requiring hospitalization.",1
"An employee came in contact with a live line while repairing a downed powerline, suffering electrical burns to the right arm and torso.",1
An employee was reaching under a pump when a rattlesnake bit his thumb. He was hospitalized.,1
"An employee and a security guard were trying to get an upset patient out of a locked room. Once the patient was out of the locked room, the employee and the security guard attempted to physically move the patient onto a bed when both the patient and the security guard fell onto the employee, fracturing her tibial plateau.",1
"An employee was struck by a 1,000-pound steel truss that fell off of a parked forklift, suffering jaw, pelvic, back, and rib fractures and requiring hospitalization.",1
An employee was changing out a roller for a steel band on the drive mechanism of a rod mill when the machine caught his glove and pulled his hand into the roller. Friction from the roller caused a burn and pulled some of his skin off.,1
"An employee was inside a freezer relocating a case weighing approximately 15 pounds from the wall onto a transport cart when he slipped on a small patch of ice and fell, fracturing his left ankle.",1
An employee was walking down the street wearing a reflective vest and hard hat while conducting a visual inspection of a repaired powerline when he was struck by a hit-and-run vehicle. He broke his right leg and was hospitalized.,1
"A drilling crew was in the process of tripping pipe out of a hole when the pulling cable snapped, letting the block fall freely on the rig floor. A piece of the cable hit one of the employees and became embedded in his right leg, requiring surgery and hospitalization.",1
"While cooking at a grill, an employee was likely affected by heat stress and fainted. The employee fell on the grill and received third degree burns to the hands, arms, face, and head.",1
"An employee was operating a powered pallet jack when the employee's foot became stuck between the pallet jack and a standing desk, breaking a toe and potentially amputating the middle toe tip.",1
"An employee bent over to pick something up, lost his balance, and fell, breaking his hip and requiring hospitalization.",1
"On September 11, 2017, at approximately 1:30 PM, two employees were performing service on a forklift (one employee was adjusting tension on the fan belt/the second was lubing the steering axle). The second employee attempted to start the forklift and the first employee's left hand was caught between the fan belt and pulley, amputating the middle, ring and pinky fingertips.",0
An employee was tightening the fan belt on a large compressor when his right pinky fingertip was caught and amputated in the fan belt.,0
"An employee had just dropped off totes in the universal packing area. A jam on the universal pack bulk conveyor occurred and a box, weighing approximately four pounds fell from the conveyor and struck the employee resulting in a possible concussion.",1
Employees were removing slag with bars. A large chunk of slag fell and pinned one employee against a wall. The employee injured his pelvis and was admitted to the hospital.,1
"An employee was moving a motorized pallet lift across the floor when he lost consciousness and fell to the ground, striking his head on the concrete floor.",1
An employee was using a utility knife to open a box when the knife amputated his right thumb tip. Personal protective equipment was not worn at the time.,0
An employee and a coworker were lifting a tamper machine when his right ring fingertip was caught and amputated at the fingernail between the machine and its cover plate.,1
"An employee was removing plastic from a molding press when the mold closed on his left hand, fracturing his fingers and requiring hospitalization.",1
An employee was cleaning a flour silo when he went up to hook his harness and the ladder slipped beneath him. He fell and broke his tibia.,1
"An employee was indexing two pieces of scrap tubing on rollers when a piece moved and caught his left middle and ring fingers, amputating his fingertips above the nail.",0
An employee separated a flange in a process line when 180° hot water came out of the line and burned him from the waist down.,1
"On September 11, 2017, an employee was reinstalling a carriage in a lathe that cuts logs into veneer when a manual chain hoist that was stabilizing the pressure roll slipped. His right arm was then pinched between the top and bottom of the lathe.",1
"As an employee was backing out of a trailer to close it down, the bands securing a skid broke. The skid collapsed, causing the bucket of a front-end loader to shift and fall on the employee's left foot, lacerating and breaking it.",1
"On 9/11/2017, at 5:20 p.m., an employee was cleaning out a mixer when he fell through a grate on the floor and struck the grate plate, injuring his groin area.",1
An employee was operating a double baker machine when a plate became stuck in the machine. He was attempting to move the plate when a moving part of the machine fractured and lacerated his right index finger.,1
An employee was using an aluminum scrap brick clamping bar to move scrap to a pallet when the clamping bar amputated the employee's left middle fingertip.,0
"While walking across the production floor, an employee was struck by a forklift, breaking the left hip and requiring surgery/hospitalization.",1
An employee was auguring in a new pole on top of the digger derrick. The old pole cracked even more as it moved and falling telephone cables struck the employee on the chest knocking him about 10 feet to the ground. The employee sustained three fractured ribs.,1
"An employee was walking through the parking lot on her way into work to begin her shift. A parked car, operated by a customer, backed out of a parking space and hit the employee, knocking her to the ground. She broke six ribs and possibly broke her leg.",1
An employee was operating a press brake tooling machine when it amputated one of his fingertips.,1
An employee was stacking materials and stepped on a moving chain. Their right foot was caught in the gear and sprocket resulting in amputation of the right big toe.,0
"An employee was selecting product and driving a pallet jack. While turning around a corner of a rack shelf, the employee's knee was caught between the pallet jack and the rack shelf. The employee suffered a knee contusion and was hospitalized.",1
"While conducting a site visit at a residential home, an employee fell from a ladder and hit the ground, breaking both elbows and the hip.",1
An employee pulled up on a golf cart outside a work bay and got off the golf cart to plug it into a charger. A reversing tractor then ran over his right foot.,1
"An employee was trying to straighten a pallet when she fell about 7 feet to the concrete floor, breaking her left tibia and requiring hospitalization.",1
An employee was attempting to mount the step of a moving garbage truck when he missed the step and his right foot became wedged under the truck's wheel. He fractured his right foot with a possible amputation.,1
"An employee was letting down riggers on a bucket truck when a coworker parked a pickup truck behind him. The pickup trucked then rolled forward and pinned him between the two trucks, fracturing his left hip.",1
"Three employees were using a portable hydraulic press to remove a part from a machine during maintenance operations. The portable hydraulic press weighs 40 to 50 pounds and is about half the size of a coffee can. The portable press disengaged during operation and fell off the machine, striking and amputating the injured employee's left pinky finger.",0
"An employee was cutting metal with a milling machine when the cutting blade lacerated his arm, requiring hospitalization.",1
"An employee was throwing a piece of plate glass into a dumpster when the piece of glass broke and fell on his left arm, lacerating his bicep. He was hospitalized overnight.",1
"An employee was on a 20-foot ladder when it moved. The employee dismounted the ladder and landed on both feet, injuring both heels. The employee was hospitalized overnight.",1
"An employee was operating a large dial machine that presses valve seats into an aluminum head when the hydraulic ram did not properly feed a valve seat. He opened the door, activating the interlock, and went to the control panel to place the station in manual mode so he could jog the feeder arm and displace the valve seat to reload another seat. The down side of the selector switch was activated, pinching and amputating his fingertip between the small ram and the valve seat.",0
An employee was hanging glove bags on pipes when he fell 3 feet from a mobile scaffold and hit his head on the concrete floor.,1
"An employee was cleaning up debris from chipping vertical columns when a 20-foot beam fell and hit the employee, breaking the right leg and ribs and injuring the stomach and back.",1
An employee was glazing windows while on a lift. A tree uprooted and a branch fell onto the lift's cage knocking the employee out of the lift. The employee suffered a fractured nose and vertebrae and required 14 stitches in an eye.,1
A temporary worker amputated four fingers while removing an energized fan situated on top of a dust receptacle bag that collected dust from an attached industrial shredder. The fan was not locked out at the time.,0
"An employee was servicing a moulder and checking the alignment of the cutter when the machine activated cutting his right middle, ring and pinky fingers. The employee was hospitalized and had surgery on his hand.",1
An employee was bitten on the neck by a black widow spider while carry a tool on his shoulder.,1
"An employee was testing a 10,000 lb. frac valve. The quarter-inch needle valve came off and pressurized water shot through his left thigh.",1
An employee was welding a stair pan. The employee used a crane to lift the stair pan up six inches. The block slipped and pinched the employee's left thumb resulting in amputation above the knuckle.,0
An employee was sitting on a bench outside the work office and was bitten by an insect. The employee was hospitalized.,1
"On September 12, 2017, an employee was operating a crane when the steel product he was moving slipped out of the under hook device and pinched his fingers between the falling steel product and material that was stacked underneath it. The employee sustained amputations to the right middle and ring fingers.",0
An employee was resetting a cone/twist lock when a container was lowered onto his hand amputating multiple fingers. The employee was hospitalized.,1
"While delivering mail, an employee fell and broke an arm.",1
An employee was working on a machine when the machine indexed and amputated the left index fingertip.,1
"An employee squeezed through an area between a table and wall, tripped on the table cloth, and fell on his right knee fracturing it.",1
"An employee was operating a 2,500-ton vertical press while the machine was in idle mode. The employee was manually spinning the die manipulator when his right middle fingertip was caught and amputated in a pinch point while spinning the die manipulator.",0
"An employee was driving a bulldozer. When it drove on an unlevel surface (about 2 feet difference), his foot slipped off the gas pedal and he fell out of the cab hitting his mouth and nose on the side mirror. The employee fell on the tracks of the bulldozer and it ran over his arm and leg resulting in a fractured femur.",1
An employee was delivering product and fell off a ramp. The employee suffered a mild concussion and facial fractures.,1
"An employee was lowering a 130-pound fixture onto a platform cart using a motorized lift when his left thumb was caught between the fixture and the cart, amputating his thumb tip.",0
"The employees were bringing the paper machine back online. The waste paper stock went into the overflow chest to be returned to pulp. An employee went out to observe the overflow from the chest in the street to make sure the sewer drain did not clog. As the employee was standing by the sewer drain, the condensate tank released to the same area. The condensate, mixed with the product from the overflow chest, caused the product level at the curb to rise over and into the employee's boots burning his feet, ankles, and lower legs.",1
"An employee was performing a routine gap-check by operating a resistance welder by foot-pedal. The employee noticed an obstruction before initiating the weld process. While clearing the obstruction, the weld process was initiated and amputated the tip of her left thumb.",0
As an employee was exiting a service elevator the service elevator door moved downward and struck the employee on top of the head.,1
An employee was operating a stamping press and caught their fingers in a pinch point resulting in a partial amputation of the left middle fingertip and a fractured left thumb.,0
"On September 12, 2017, an employee amputated his right ring fingertip while cutting square steel tubing on a band-saw.",0
An employee was cleaning a rack when a stack of A-frames fell on him pinning him to the floor and resulting in a broken humerus and a head laceration that required staples.,1
An employee was moving a piece of glass when the glass broke and cut his arm.,1
An employee was on an extension ladder to line up ceiling/floor boards above him. The ladder slipped out from under him and the employee fell to the floor resulting in hospitalization for fractured ankles.,1
An employee was manually lowering a piece of steel from the fifth floor to the first floor using ropes when he lost control of the rope. His left ring fingertip was then caught and amputated between the rope and the fifth floor guardrail.,0
"An employee was lifting a 1"" steel plate. The steel plate hit a lip and dropped, smashing the employee's left thumb between the top and bottom steel plates amputating the thumb tip.",0
An employee was baling scrap aluminum. The employee attempted to dislodge a piece of aluminum while the baler was operating. The employee's arm was caught in the door resulting in a laceration to the employee's bicep.,1
An employee was disconnecting a baggage cart from another baggage cart when the upper portion of the receiver hitch dropped and crushed the tip of their right index finger partially amputating it.,0
"Two employees were repairing a press. During the process, the two employees were repositioning the core rod assembly onto a pallet near the back of the press. The core rod assembly was in a vertical position, with the core rod component sitting on a pallet. One employee was operating a forklift to reposition the core rod assembly. The forklift operator communicated to the other employee that he was going to lay the core rod assembly down. At that point, the other employee had his right hand holding the core rod stop mechanism to help guide it down. At approximately three quarters of the way down, the core rod assembly slipped off of the pallet causing the core rod stop mechanism to move up, pinching the other employee's right index and middle fingers between the core stop mechanism and the core rod assembly and amputating the fingers at the first knuckle.",0
An employee was pushing a lift through the field house when it hit a basketball hoop and tipped backwards. The lift fell and landed on the employee's leg breaking his right ankle.,1
An employee was loading insulation into a bag pusher machine and two fingers were caught in the point of operation. The tips of his right middle and ring fingers were medically amputated to the first knuckle.,0
Employees were unloading a barge into a charge truck on the scrap dock. The crane operator was stepping out of the cab to relay a message to a dockhand. When he returned to the cab of the crane his shirt caught on one of the joysticks and pulled the grapple toward the machine. The grapple struck the charge truck driver resulting in a head laceration and contusion resulting in hospitalization.,1
"An employee had locked and tagged out an air handling unit to replace covers that were removed during a hurricane. He noticed that the belt was loose and attempted to tighten it. He then checked the tension of the belt and rotated the belt with his right hand. The momentum created when turning the motor pulled his fingertips into the pulley, lacerating and fracturing his right index, middle, and ring fingertips.",1
The injured employee was operating a telehandler that had a man basket with two employees in it. He was backing it up and struck a large object. He stopped suddenly and began to lower the man basket. The telehandler tipped over. The injured employee had multiple broken toes on his left foot that required hospitalization and surgery. The employees in the man basket suffered cuts and bruises.,1
An employee was walking from the elevator to her desk when she twisted her ankle and fell. She suffered a fractured ankle that required surgery.,1
The injured employee was on a stand-up forklift when another forklift was unable to stop and struck the employee's right foot resulting in a laceration. The injured employee was wearing steel toed boots at the time.,1
"While moving an air conditioning unit, an employee's hand slipped and a metal edge of the air conditioning unit caught and amputated his fingertip.",0
"An employee was walking down a ramp, slipped, and suffered a knee injury that required surgery.",1
An employee was climbing a permanent ladder inside a wind turbine. The employee was wearing a fall harness attached to a climb assist mechanism. The employee's foot became tangled and he slipped off the ladder falling 6 inches. The injured employee was hospitalized for a muscle strain.,1
A temporary employee was using a packing machine to wrap a part in plastic sheeting. The plastic sheeting balled up inside the machine. The employee attempted to dislodge the blockage and amputated his right middle fingertip.,0
"On September 13, 2017, at approximately 2:30 p.m. an employee was spraying a form with oil. The employee slipped and fell about 8 feet and was caught under the arm by a form rack. The employee suffered a cut to the arm that severed a nerve.",1
"An employee was operating a cutting machine used to cut plastic. The employee's hand was caught in the point of operation during a cut, resulting in the amputation of his right middle finger above the first knuckle.",0
"An employee was at the top of a fixed ladder mounted on the interior of a 10-foot deep trench box. It was raining and the employee's feet and the ladder were wet. The employee slipped off the ladder and fell onto his back on the plywood flooring of the excavation, sustaining a back injury.",1
"An employee was removing jammed film from a sleever machine. The machine started, which engaged the auto knives, and amputated the employee's right index fingertip.",0
"While an employee was walking up a metal loading dock ramp, their foot became caught on the steel diamond dock plate which caused them to fall and fracture their left femur.",1
"While working to reposition felt, an employee slipped on the felt and fell from the roof of a 3-story building to the ground below and was hospitalized for an injured pelvis, broken ribs and a punctured lung.",1
"An employee was working on a car and trailer that had an air hose hooked onto it. A coworker was pulling out another vehicle when it hooked onto the air hose and began to pull the trailer. The employee had to then jump off the trailer, suffering a contusion to the top of the right leg.",1
"An employee was delivering produce and was carrying a box inside the truck when he fell out of the truck, striking his head on the ground. He was hospitalized for head injuries.",1
An employee was standing on a frac unit situating a high pressure pipe. The employee stepped on a tow hook while climbing down and his foot slipped causing him to fall approximately 24 inches and strike his right side on a pipe.,1
"An employee fell off a step ladder resulting in a fractured knee, leg, and elbow.",1
An employee was riding as a passenger in a utility vehicle. While turning on a gravel surface the vehicle rolled over. The employee sustained a fracture and laceration to the right leg near the ankle.,1
"While working from a bucket truck, an employee received an electrical shock from a downed power line.",1
An employee had been performing roofing operations and was hospitalized for heat stress on 9/13/2017.,1
An employee was laying down drill pipe when he felt body cramps and said he was going to pass out. The employee was hospitalized overnight for renal failure due to heat exposure.,1
An employee went to use a recently cleaned restroom and suffered a possible allergic reaction to the cleaning chemical.,1
"An employee was working on toning out a 277-volt three-phase transfer switch. When he connected a tone generator to one of the lugs on the transfer switch, an arc flash occurred and the employee's right hand was burned.",1
"An employee had his hand on a car door. When a co-worker released the emergency brake, the car moved backwards and the employee's finger was caught between the car door and the building resulting in a partial amputation of the left index finger.",1
While moving pallets off a platform an employee fell approximately 7 to 8 feet and was hospitalized for a head injury.,1
"Employees were conducting repair operations and lifting an 850-pound 8"" pipe with a winch and swiveling block and tackle while working at a height of 15 feet. The employees were trying to position the pipe as they were hoisting it into place when the swivel bound, causing the lifting cable bind and break. A secondary come-a-long and chain kept the pipe from falling, but the pipe swung into an employee, fracturing a vertebra in his neck, breaking his left arm in two places and fracturing his wrist.",1
"While working on the packing line, an employee felt dizzy and fell to their knees. The employee was hospitalized for dehydration due to heat.",1
"An employee was cutting wooden pallets when a metal splinter struck the employee in the left eye, causing injury.",1
"While cutting cardboard on a sheer, an employee amputated a portion of his left index finger. The machine was guarded at the time.",0
An employee was walking to their car in the parking lot and was struck by another car backing up.,1
"While framing an apartment complex under construction, an employee fell approximately 22 feet to the ground and sustained a fractured skull, broken back, sprained arm and contusions.",1
"On September 14, 2017, an employee was hospitalized after suffering a head injury while operating a glass cutting machine. The employee bent down to the floor and was struck on the head by the moving bridge of the machine. The employee also suffered a heart attack.",1
An employee reached into a machine in the packaging room and sustained a partial finger amputation.,0
An employee was lifting a tire to install it on a vehicle when he felt a pop in his abdomen. He was hospitalized with a hernia.,1
An employee was painting a steel beam that was on a saw horse when it fell on and broke his leg.,1
An employee was locating underground utilities. He opened a hand hole to inspect inside for damage and was exposed to 750k electrical current. The employee was shocked and received injuries to his chest and calves.,1
"An employee was struck by a motor vehicle while standing on a sidewalk, suffering a broken right leg.",1
"An employee was working on a rolling conveyor that was set on top of two sawhorses. The conveyor shifted and fell off the sawhorses, landing on and fracturing the employee's right ankle.",1
"On 09/14/2017, an employee experienced symptoms of dehydration and heat stress while assisting with power restoration, requiring hospitalization.",1
"An employee was cutting a tree with a chainsaw when the saw became stuck. As he attempted to free the chainsaw, it came loose and lacerated his left foot.",1
An employee was cleaning around a molder press and attempting to remove a part when the press amputated her left middle fingertip above the first knuckle. The machine was guarded and active at the time of the incident.,0
An employee working outside of a steam manhole fell 8 feet to the bottom of the manhole and sustained broken ribs.,1
An employee was delivering packages when he started sweating excessively and suffered heat-related body cramps. He was hospitalized overnight.,1
An employee was clearing a jam on a punch press when their hand became trapped between materials on the roller table resulting in fractured middle and ring fingers.,1
"On September 14, 2017, an employee was loading a 70-pound box of meat onto a non-powered conveyor line when the employee's left pinky finger was smashed and fractured between the box and the conveyor, requiring surgical amputation.",0
"Employees used a box to hold up a decorative wooden box surrounding a vertical truss. As the injured employee pulled the cable out from inside the truss, the box holding up the decorative box slipped, causing the decorative box to fall onto the victim's left hand. The employee suffered lacerations, a contusion and possible fracture to the left hand.",1
An employee was operating a triple pallet jack when he collided with a coworker operating a forklift at a warehouse intersection. He suffered leg injuries and was hospitalized.,1
"An employee was working in the pharmacy and using a company-approved step stool. When she stepped up onto the step stool, she rolled and fractured her left ankle, requiring hospitalization.",1
"On September 15, 2017, an employee was walking between a tube handling system and a drawing unit when a copper tube impaled the employee's left upper leg, requiring hospitalization. The area between the two machines was unguarded at the time.",1
"An employee was cutting up a tree that had fallen across a power line. The power line was under the tree and was stretched taught. When the employee cut the final log, it broke suddenly and was flung into the air. The employee ran a few steps and the log hit him in the head and shoulder area. He suffered a fractured spine, crushed vertebrae, and facial lacerations.",1
An employee was applying chemical paint remover to a beam when the chemical got inside his sleeves and burned both arms. He was wearing PPE at the time.,1
An employee fell four feet from a ladder and fractured the left tibia and fibula.,1
"An employee placed a generator on a tractor trailer flatbed. He raised the flatbed while his left hand was on the trailer's frame rail. His left thumb was then caught between the frame rail and the flatbed, amputating his thumb tip without bone loss.",0
"An employee fell from a ladder while dismantling a greenhouse, suffering a head injury.",1
"An employee was standing on top of a 12-inch-diameter pipe, attempting to hang a chainfall, when he lost his balance and fell backward onto a piece of horizontal pipe, puncturing a lung.",1
An employee was traveling on a lease road making a left hand turn when the tractor trailer shut off completely causing power steering to no longer function. The tractor trailer left the roadway and rolled over onto the passenger side of the vehicle. The employee was admitted to the hospital and underwent surgery on vertebrae in the top region of the neck.,1
"An employee was ascending a crank-up scaffold system via an affixed access ladder when one of the employee's hands slipped from a rung. The employee then fell approximately 3 feet to the finished concrete surface below, twisting and breaking the right ankle. The employee was hospitalized and had surgery.",1
An employee was placing scaffold planks from the third to the fourth scaffold level when the employee fell approximately 15 feet from the scaffold.,1
"An employee was testing a trim blower with tissue paper when he lost his balance and fell. During the fall, his left-hand palm contacted the trim blower's slitter blade and was lacerated.",1
An employee's left hand was smashed between a push/pull and a rotor.,1
"An employee fell to the ground while transferring his safety equipment from one purlin to the next, fracturing his ankle and leg.",1
"An employee was unloading waste material from a portable holding bin when a steel container fell off a forklift and onto her leg, fracturing her femur.",1
"An employee was climbing a residential structure to reach the top plate when he slipped and fell, landing on a brace and breaking his left foot above the ankle. Fall protection was not worn at the time.",1
"An employee fell from a large planter while clearing storm debris, hitting the floor and breaking six ribs.",1
An employee tripped while getting off a forklift and fell to the ground. He lost consciousness and sustained injuries to his face and shoulders.,1
"An employee began to fall in a customer's attic and grabbed a metal strap holding duct work. The metal strap cut his hand, damaging tendons in his index and middle fingers.",1
"An employee was using a vertical hammer to pile drive when a steel piece of the hammer came loose and struck his head, lacerating it. He was has hospitalized overnight.",1
An employee's hand slipped while operating a meat slicer resulting in amputation of the right thumb tip.,0
"An employee was walking from house to house delivering mail. As she was walking back through a yard, she fell while walking down an incline, twisting and breaking her right ankle.",1
"An employee was installing satellite TV service in a customer's home when the employee suffered chills and a high temperature, possibly due to heat-related illness. The employee was hospitalized.",1
"An employee was exiting the restroom when she slipped on deodorizer on the floor and hit her left knee, fracturing her kneecap.",1
"An employee was cleaning a reactor when an explosion occurred. The employee was hospitalized with second and third degree burns to the neck, shoulders, arms, hands, and fingers.",1
"On September 15, 2017, an employee climbed onto a trash compactor to clear a jam and fell approximately five feet to the concrete surface below the compactor. The employee lost consciousness, suffered a seizure, fractured ribs and a wrist, and lacerated the spleen.",1
"An employee was putting a tire on a vehicle when the jack slipped and struck his left wrist, causing six fractures.",1
"An employee was coming down a ladder attached to the side of a machine when she missed the last step and fell to the concrete floor, fracturing her femur.",1
An employee was putting a screw into an electrical box when an arc flash/blast occurred. The employee suffered electrical burns.,1
"On September 15, 2017, an employee and a coworker were changing an extruder blade. After changing the blade, they purged the machine, which released hot water/steam that burned the employee's arms.",1
"An employee was chasing two shoplifters when he slipped and fell in the parking lot, breaking his hip.",1
"While making a service call, an employee stepped into a hole in the ground and broke his leg.",1
"On 9/15/2017 at 6:00 p.m., an employee was power washing to prepare the store for business the following day. While on a dry surface, he slipped and fell causing a tibia or fibula fracture and a dislocated ankle. He was hospitalized and surgery was performed.",1
An employee was working on a heat exchanger when the filter for the drain line overflowed with a water/oil mix and exploded on the employee. He sustained burns to his upper body and knee.,1
"An employee was standing in the parking lot of the establishment and was struck by a forklift. The employee was hospitalized with a degloving injury to the left ankle, a fractured left tibia/fibula, a left ankle fracture, and a left foot fracture.",1
An employee was removing meat from a skinner machine when the blades lacerated his hand and fingers. His ring finger had to be surgically amputated.,1
An employee was standing on the sidelines during a football game and was hit by a player during a tackle. The employee was hospitalized for a fracture or torn ligament.,1
"An employee was operating a stand-up reach-forklift when it went out of control. His left foot went outside the forklift and got caught between a stationary guardrail and the forklift, causing multiple fractured toes.",1
"An employee was assisting with maintenance on a mini mill when he tripped/slipped on a mill sled track and fell to the ground, injuring his lower back. He was hospitalized.",1
"An employee picked up a load of production water at a well site with his truck. As he was leaving the site, his truck's back tires left the roadway, causing the vehicle to roll over. He suffered four spinal fractures.",1
"An employee was pushing a board through a jointer to flatten rough-sawn lumber when his right hand entered the cutting area, partially amputating his pinky finger.",0
An employee was at a construction site installing a steel beam hoisted into position with a forklift. The employee climbed a ladder to access the beam and fell approximately 15 feet sustaining a fractured right femur and a right ankle compound fracture.,1
An employee was driving a double pallet jack. The employee turned into an aisle and struck a parked cherry picker pinning both legs between the pallet jack and cherry picker resulting in a compound fracture of the left leg.,1
"On September 15, 2017, an employee was loading a core into the pinch rollers on a C-line when the employee's right arm was pulled into the pinch rollers.",1
"An employee was cleaning out a dough mixing machine. The machine started while the employee's hand was inside, and the auger amputated one of the employee's fingers.",0
"An employee was on the back of a trailer that was in the dock doorway. As he was filling an air bag, a coworker driving a yard truck pulled the trailer away from the dock and the employee fell out of the trailer. He dislocated his right elbow.",1
"An employee disconnected what he thought was a steam hose but was actually a molten asphalt hose. The molten asphalt splashed his chest and arms, causing second degree burns.",1
An employee was cleaning a mixer chute and amputated a finger when it contacted the mixer blade. The machine was unguarded and was not locked out at the time.,0
"On September 15, 2017, an employee was pinned between a stand-up lift and a pallet lift, fracturing his left leg and requiring hospitalization.",1
An employee was helping a truck driver unload a container when his foot was caught and severely lacerated by the truck frame.,1
"An employee was standing on a ladder to remove an obstruction from a conveyor when the employee slipped and fell off the ladder, striking the conveyor before striking the ground. The employee suffered a broken rib, bruised eye, and finger injury.",1
"An employee was painting the ceiling of an indoor gun range, stepped off the edge of the scaffold and fell 11 feet resulting in multiple fractures to the back, hip, legs, ankles and feet.",1
"An employee was retrieving a file box from the top of a shelving unit when the employee fell backward down a set of mobile stairs, suffering L1 and L2 compression fractures.",1
"On September 15, 2017, at approximately 7:00 a.m., an employee was operating a paint machine when the paint wand hose sprang a leak and began discharging paint at high pressure. He was attempting to grab the wand gun handle when his right index finger was struck by the high-pressure paint (2,000 PSI). His right index finger had to be surgically amputated.",0
An employee was sitting by the stairs and said he didn't feel well. He was hospitalized for heat exhaustion and dehydration.,1
"While an employee was cleaning the seeder line by blowing the line with an air gun, the line was activated and the employee's hand was caught between the chain and sprocket of the running line. The employee's right pinky and middle fingertips were amputated. The guard was not in place at the time of the incident.",0
"An employee was delivering mail to a residential home when a dog broke free from his chain, ran into the front yard of the residence and attacked the employee. The employee sustained a right middle fingertip amputation.",0
"An employee was using a forklift to clean up trash/debris at the end of the day and the forklift rolled over. The employee remained inside the cab area, resulting in a shoulder injury.",1
An employee was loosening the bolts on the wedge sliders of a steel chase form when his right thumb was amputated.,0
"An employee was repairing the handle of a pallet jack. The spring in the handle was broken and as the employee started to disassemble the handle, the handle fell and caught his fingers between the frame and handle, amputating two fingertips on the left hand.",0
An employee was cleaning an energized air compressor and sustained an avulsion injury to his right hand that required hospitalization and surgery to repair.  The belt and pulley guard was not in place at the time.,1
"An employee was manually placing components to be heat welded to film when the employee noticed that the film was sticking to the front of the hole cutter. As the employee was attempting to remove the sticking film, the cutter activated and amputated the right middle fingertip.",0
An employee was removing a box from under a hydraulic lift. The lift dropped when the box was removed and crushed the employee's arm.,1
An employee was climbing an A-frame ladder and fell breaking an ankle.,1
"An employee was operating an earth compactor to compact soil so cement could be poured for a new driveway. The employee drove up an incline and then turned the compactor so it was parallel to the hill. The compactor tipped over, causing injury to the employee's left hip and breaking his left foot.",1
"While walking, an employee's cane got caught on the door and she fell forward resulting in a broken hip.",1
"On September 16, 2017, at approximately 11:00 a.m., an employee and two vendor employees were repairing a tank dike liner with a heating iron. Flammable condensate leaked from the plumbing at a hammer union on ground level going to the condensate tank. The heat gun ignited the vapors resulting in third degree burns to the injured workers' hands and face. One employee was hospitalized.",1
An employee was fixing the chain on a tape machine when their fingers were caught between the chain and sprocket. The employee received a laceration to the left hand and broken fingers.,1
"On September 16, 2017, an employee was removing material from a die machine when his left hand was drawn into the rollers, crushing his left pinky, ring, and middle fingers and amputating his middle fingertip.",0
An employee was attempting to get a pulley going on a stacker/trimmer machine when the employee's glove was caught in the pulley. The pulley then smashed the employee's hand resulting in a finger amputation.,0
An employee was delivering mail to a residence and was attacked by a dog. The employee fell suffering a fractured back vertebra.,1
An employee was hand drying a vehicle using a towel when he experienced cramps in his left arm. He was hospitalized for dehydration.,1
"An employee was bumped into by a customer and fell. She broke her left wrist, requiring hospitalization.",1
An employee was walking on the receiving dock and tripped on a plastic strap falling onto his right side. The employee was hospitalized.,1
"An employee was stenciling pipe when he dropped the stencil. As he was picking up the stencil, he placed his left hand on the pipe rack and a pipe moved, catching his left ring finger between the pin stop and housing. The employee sustained a partial left ring finger amputation.",0
"An employee was chopping celery with a knife and cut his left thumb, resulting in a partial amputation.",0
An employee was manually putting product into the emulsifying machine. The plastic scraper fell inside the unguarded point of operation and the employee tried to retrieve it. The auger located at the point of operation caused multiple injuries to the employee's right arm.,1
An employee's hand was crushed while removing stuck parts or scrap from a full revolution press.,1
"On September 18, 2017, an employee was holding a bar that loosened tension on the spring of the garage door with his left hand. While he was loosening set screws with his right hand, something let loose and caused the bar to swing around and smash the left middle finger between the bar and the metal structure.",1
An employee was on a roof doing prep work for painting. The employee fell off the roof and sustained a broken arm.,1
"An employee was replacing a tie bolt on a vehicle's leaf spring when the vehicle slipped off the portable hydraulic jack and landed on the employee's left hand. His left hand was crushed, and the bolt pierced his left pinky finger, which required surgical amputation.",1
"While climbing an extension ladder with a box to put in storage, an employee lost balance and fell to the concrete floor, suffering a pelvis separation. The employee was hospitalized.",1
An employee was hooking up a 70-foot rebar into the ground when a 25-foot piece of rebar fell and hit the back of his hard hat. This resulted in a fracture to his C1 and C2 vertebrae.,1
An employee was watching the operation of a shuttle machine when parts jammed and fell beside the machine's rail. He was attempting to remove the parts when the machine cycled. The clamp then caught and amputated the first digit of his right middle finger.,0
"On 9/18/2017, an employee was installing a residential roof and tearing off layers of the roof's pitch. While throwing a bundle of shingles to the ground, the employee fell about 17 feet to the ground, injuring the wrist and lower back. Fall protection was not used at the time of the incident.",1
"An employee was working on a palletizer, went to the back side of the machine, and was struck by/caught between the machine's ram and frame. The employee suffered broken ribs and other injuries. The machine's guard had been bypassed at the time of the incident.",1
The lima bean combine harvester was having infeed problems. An employee climbed up on the machine head to observe the problem. The harvester operator was unaware the employee was there and raised the machine head. The employee was struck/pinched by the machine head fracturing three ribs.,1
"An employee was unloading crates from a container when one of the crates fell on top of the employee, fracturing the right arm/shoulder.",1
"An employee was attempting to cross a planer line when a barricade was lifted and a piece of wood struck him, fracturing his pelvis and rib. The planer was not locked/tagged out at the time.",1
"An employee bumped into another employee and fell to the ground, suffering a fractured hip.",1
"An employee and driver were unloading a frac tank from a winch truck. While trying to unhook the winch cable from the tank, the driver tightened the winch cable instead of loosening it, pinching the employee's finger between the cable and rear roller. The employee's right index fingertip was amputated.",0
An employee operating an expanded metal manufacturing machine had his arm caught and fractured in the machine while trying to align it. The machine was guarded at the time.,1
"On 09/18/2017, at approximately 6:45 a.m., an employee was loading a dumpster onto the truck to be dumped in the back. The dumpster was stuck in a pothole. The winch pulled the dumpster until it released from the pothole and the employee's finger was caught between the truck and the dumpster, amputating the left ring fingertip.",0
"An employee was descending from a power pole when he fell, injuring his back and breaking his right foot. His safety belts were removed at the time of the incident.",1
An employee was reaching down to pick up a flashlight that he dropped when a rattlesnake bit his finger.,1
An employee used a push-stick in his right hand to push a piece of soft wood through a wood jointer to remove a 1/8 inch of wood from the board. He was using his left hand to guide the board through the jointer when his left-hand fingers came in contact with the jointer blade. The jointer blade completely amputated four fingers and partially amputated another finger. The jointer was guarded at the time.,1
"An employee was in a basement looking for product when he bumped his head on a water pipe. He lost consciousness and suffered a concussion, requiring hospitalization.",1
An employee was loading trash into a refuse truck when his pinky finger was amputated by the packer blade as it cycled.,0
"An employee was performing utility line tree trimming and fell out of a tree approximately 30 feet to the ground. The employee sustained a cracked pelvis, broken rib, and a punctured lung.",1
An employee was in the basket of an aerial lift painting the exterior fascia in the front of a building. The lift moved and the employee contacted a 13.2 kV power line. The employee was shocked and received burns to the hands and head.,1
An employee was using a press to seal a plastic bag around a pillow when the press' heat sealer compression bar amputated the employee's left first fingertip.,0
An employee fell from a forklift while exiting it and suffered a back fracture.,1
"An employee was working from a ladder when he fell 15 feet, breaking his wrist and cutting his leg.",1
"An employee was using a forklift to move a bale, weighing approximately 1000 lbs., to a c-can for storage. When the employee unsecured the bale from the forklift, the bale fell off the forklift and onto the employee, fracturing his ankles.",1
"An employee was backing a trailer into a building dock when the right trailer door came unlatched and hit the building. The employee pulled forward and walked to the back of the trailer to re-secure door. The door then broke from the hinges and started to fall toward the employee. As he tried to move out of the way, he tripped and fell, landing on a chock block, fracturing three to four ribs and suffering a collapsed left lung.",1
"While moving furniture and equipment, an employee backed through a doorway and backed into a piece of exercise equipment. The employee fell on her left arm resulting in a forearm fracture.",1
An employee was working to cut sewer pipe to a specified size. The employee had cut one side of the pipe with a powered concrete saw and was turning the pipe to cut the opposite side. The saw kicked back and lacerated the employee's chest.,1
"On September 18, 2017, at approximately 11:55 p.m., employees were re-installing furnace ducts after replacing the duct rollers. The injured employee was working from an unguarded service platform located about 6 to 7 feet above the adjacent floor level when he fell and struck his lower back against a guardrail that was temporarily placed below the service platform. He fractured his vertebrae and was hospitalized.",1
An employee was running wires via an electrical panel to provide temporary lights when a ground wire touched the panel's line terminal and created a spark. The spark burned the employee's right elbow and left cheek.,1
"An employee was working on a concrete jail cell when a steel wedge came loose and struck his right thumb, amputating it to the first knuckle.",0
"An employee was standing on a ladder while removing shelves stored on top of a pallet racking system. The employee had placed a foot on a box for balance when the box collapsed. The employee then fell 12 feet, requiring hospitalization for fractured ribs and vertebrae.",1
"An employee had activated a vertical turret lathe when the table began rotating and the horizontal cutting tool moved toward an unsecured pipe fitting. When the cutting tool contacted the unsecured fitting, it caused the fitting to jump off the table and strike the employee's right hand, fracturing and lacerating the right thumb. Part of the employee's thumb had to be medically amputated.",1
An employee slipped and fell on a wet floor while attempting to block a client from an off-limits item. The employee suffered a broken tibia and fibula.,1
"An employee was on an extension ladder mounting a dish at a residence when wasps stung him several times and he fell off the ladder. He suffered a pinched nerve and numbness in his upper arms/neck, requiring hospitalization.",1
"An employee was attempting to adjust a pot on a blow mold machine when the employee's right hand slipped and was caught in the mold. As the employee pulled the hand out, the mold amputated the pinky fingertip.",0
"An employee was supervising a repair job on a stacker crane when a metal panel fell off of a structural member of the crane and struck him, causing a compound fracture to his right leg.",1
"Two employees were in a scissor lift approximately 17 to 18 feet high to hang duct work. They had finished hanging a piece when the scissor lift activated, began moving quickly in circles, and overturned. One of the employees was hospitalized with vertebrae, wrist, and ankle fractures. Both employees were tied off in the scissor lift at the time of the incident.",1
"An employee was installing a tire on a trailer when the tire exploded, dislocating the employee's right hand and lacerating the right knee.",1
"An employee was getting pipe and weld data off a pipe that was being cut after hydrotesting when the pipe fell on the employee's legs, breaking two bones above the right ankle. The employee was hospitalized and had surgery.",1
"An employee was drinking water by a water fountain when she slipped, lost her balance, and fell to the floor, fracturing her leg.",1
"An employee was operating a pallet jack to select dry product in an aisle around 5:30 p.m. along with several other pallet jack operators. He was walking between his pallet jack and a coworker's parked pallet jack when his pallet jack rolled forward and caught his right leg between the two pieces of equipment, fracturing his lower leg/ankle.",1
"An employee backed a van into a cargo house. He exited the van, which was still running, and it began to roll toward him. To avoid the van, he ducked under a metal shelving unit. He struck his face and head on the shelving, breaking his nose and lacerating his head and ear. He was hospitalized for surgery.",1
An employee amputated a finger.,0
An employee was unpacking a pane of heavy glass when it fell on and broke his right leg. He was hospitalized and had surgery.,1
"An employee was sorting mail when she tripped on a plastic band and fell to the concrete floor, injuring her hip and requiring hospitalization.",1
An employee was operating a powered pipe threading machine when it amputated the employee's right middle finger at the second knuckle.,0
"An employee was checking the end of the milk line filter, slipped and fell resulting in a head injury.",1
"An employee was carrying a jug of concentrated chemicals that contained acid when the fluid ran under his glove, burning his hand and requiring hospitalization.",1
"On September 19, 2017, an employee fell about 10 feet from an extension ladder to the concrete floor while working on a beam pocket. The employee was hospitalized with paralysis of both legs and the right arm.",1
"An employee fell approximately 8 feet from an unprotected edge while installing rebar for a barrier wall, fracturing the sternum, wrist, rib, and vertebrae.",1
An employee was removing Styrofoam from a concrete slab that was being lowered when the employee's left hand was crushed between the concrete slab and a steel slab.,1
"An employee was loading packages into a truck. As he picked up a box to put on a shelf, pet odor removal powder poured out of a hole in the box and contacted his body. He had an allergic reaction, suffering hives and respiratory distress. He was hospitalized overnight.",1
"An employee was working near a cuber machine when it actuated and came down on him, injuring his abdomen. The cuber was guarded with a safety fence at the time.",1
"An employee was on the third step of a 12-foot A-frame ladder disconnecting power to pantry coolers when a bolt from one of the side hinges came out, causing the ladder to collapse. The employee fell to the floor, fracturing the left wrist.",1
"An employee was moving a cow from one pen to another. He was standing outside the pen fence when the cow charged the fence and smashed it hard enough to loosen a 2"" pipe. The pipe hit the employee with enough force to break his eighth rib and lacerate his liver.",1
"A employee was replacing a failed expansion valve on a refrigerated display case. He was soldering a copper pipe when a small amount of refrigerant in the pipe expanded when heated and flashed. He started coughing and had a runny nose, requiring hospitalization for respiratory irritation.",1
"On September 19, 2017, an employee was using an unguarded table saw to cut a board when the blade hit a knot in the board. The employee's left thumb and pointer finger were pulled into the blade resulting in a severe laceration requiring surgery.",1
"An employee turned a corner while operating a riding pallet jack and fell off of the machine to the concrete floor, suffering a possible ankle fracture.",1
An employee's left index fingertip was amputated.,1
"An employee was inspecting and repairing a roof that had hurricane damage when he fell from the roof and struck a tree trunk, suffering a compression fracture to the L2 vertebra, a spiral fracture to the right tibia, and ankle injuries.",1
"An employee was carrying egg cartons to stack on pallets when he tripped over a pallet on the floor, landing on his right side. He dislocated his right hip and fractured his femur, requiring hospitalization.",1
"An employee was driving a utility vehicle down a dirt road and turning left into a driveway parking lot when he lost control of the vehicle, fish-tailed, and flipped. He suffered a compound fracture to his leg.",1
An employee's ankle was run over by a truck.,1
"An employee was setting drill pipe slips when his right foot slipped and was caught in the drill pipe slips, crushing the end of his foot. He was hospitalized overnight and had surgery.",1
An employee was operating a rubber calendar mill when his left hand contacted a moving fabric sheet and was then pulled under a roller. His left arm broke in two places as he was removing it from the equipment.,1
"An employee was checking the level of grain in his truck trailer. He had climbed down the trailer ladder and was on the platform between the truck and trailer when he slipped and fell about 3 feet forward onto his head, lacerating his head and breaking his collarbone.",1
"An employee was operating a yard tractor when he turned sharply and made abrupt contact with some bundles of pipe. The yard tractor was picked up by the momentum and then slammed down, shaking the employee in the process. He suffered head lacerations and a broken vertebra, requiring hospitalization. PPE was worn at the time.",1
An employee suffered a hernia while climbing a scaffold and was hospitalized.,1
"An employee was making a deposit at the bank when he fell near a curb that had an incline, fracturing his hip and requiring hospitalization.",1
"Employees were running packers and had just finished a job. The injured employee was kneeling down on the left knee on the under floor (floor that was six feet off the ground) when a sudden burst of pressure and flow back struck the injured employee's right side dislocating an elbow, breaking the ulna and causing various abrasions and bruises.",1
"An employee slipped and fell off a crane while climbing into the cab, fracturing his left arm and elbow.",1
"An employee was on a scaffold when he became dizzy. As he was descending the ladder, he lost his balance and fell to the ground, breaking his left femur and requiring hospitalization.",1
An employee passed out due to heat stress while hand planting sugar cane plants at a farm.,1
"An employee was attempting to remove a piece of cardboard that had slipped over the packer blade of a waste collection truck hopper when the packer blade began to crush and lacerate his right hand, fracturing his right wrist. The truck hopper was not locked/tagged out at the time.",1
An employee was trying to clear a plastic bottle jam in a running trimming machine when the trimmer amputated the employee's right index and middle fingertips.,0
"An employee was drilling a concrete anchor with a hammer drill when he pulled on a loose duct hanger, which then cut his arm.",1
"An employee fell from the second step of a stair set he was assembling, sustaining two broken ankles and a broken tibia.",1
"While working in an aerial bucket truck to reinstall a primary conductor on a utility pole, an employee came into contact with the powerline and received electrical burns to the torso.",1
An employee was helping a coworker make adjustments to an electric drive motor belt on an asphalt house bag machine when the belt amputated his fifth finger.,0
"On 9/20/2017, an employee was acting as a spotter for an aerial lift when the lift ran over the employee's left foot, fracturing three toes. The employee was hospitalized.",1
An employee was adding ruthenium to a reactor when a chemical reaction occurred and released vapors. The employee suffered chemical inhalation burns and was hospitalized.,1
An employee was working with a deli meat slicer when the guard came loose and hit her head.,1
An employee was maneuvering a manlift over a speed bump at a crawl when the manlift accelerated and lunged forward as the front wheels went over the speed bump. The employee was lifted into the air and straight back down onto his feet in the basket. He then dropped down into a seated position. This jarring action broke his lower right leg.,1
An employee was pulling the hook out from the front winch on an all terrain vehicle when a coworker activated the winch switch. The winch cable was then pulled into the winch and amputated the employee's right middle finger.,0
An employee started feeling ill while mounting and dismounting tires and lost consciousness. The employee was hospitalized with severe dehydration from the heat.,1
"The injured employee and two co-workers were approached to assist a truck driver lift a small scissor lift back onto its wheels after it tipped over. While lifting the scissor lift, the injured employee's left index and middle fingers were caught in a pinch point when the machine was set upright resulting in amputation of the left index finger and a severe laceration to the middle finger.",0
An employee was attempting to remove residue from a machine's chain when the employee's right index finger was caught and lacerated in a pinch point between the chain and sprocket. The machine was running at the time.,1
An employee had been performing post-hurricane cleanup and demolition at an apartment complex for 10 hours when he lost consciousness due to the heat. He was hospitalized for dehydration.,1
"An employee was working on a sheet metal machine when the sheet metal slipped. The machine then came down on his left index finger, partially amputating it.",0
An employee was attempting to unlock a cargo container twist lock as the container was being lowered onto a trailer. The right middle and index fingers were caught between the cargo container and the trailer resulting in amputation.,0
A temporary employee was working on a new construction job site conducting plumbing related activities and suffered dehydration and heat stress. The employee was hospitalized.,1
"An employee was trying to manually unlatch a beam on a trailer to unload it when he fell and landed on the ground, fracturing his L3 vertebra.",1
"A landscape cutting crew had just stopped in an area and were beginning to set up equipment when a car struck the back of their wood chipper and spun around, striking the employee. The employee suffered head and neck injuries and was hospitalized.",1
"An employee was at his work station trying to move the base to straighten out a machine using a hammer. He missed the station and hit his left middle finger with the hammer, amputating his fingertip.",0
"An employee was waiting in the hammer mill to prepare a grate bar for rigging and removal when the grate bar suddenly shifted and fell on him, crushing his pelvis and right upper leg. He was hospitalized.",1
"On September 20, 2017, at approximately 9:00 p.m., an employee was applying anti-caking material to an in-feed incline belt (inside a shredder feed on a conveyor belt) when the employee's left ring finger was caught between the metal idler pulley and the conveyor, amputating the fingertip.",0
"An employee was performing pipeline tie-in activities when a natural gas product ignited, causing a flash fire that caused second degree burns to the employee.",1
"An employee was using a forklift to bag ground-up dirt that is used for drilling operations. As he was removing a hook from a metal rack, the forklift moved forward and the mast struck his right middle finger, smashing it and amputating the fingertip.",0
"An employee slipped and fell on the floor, fracturing an arm.",1
"An employee was ascending a pole to make electrical repairs after a hurricane when his climbing gaff (the nail of the climbing hooks that go into the pole) struck a metal washer in the wooden pole, causing him to hit his jaw on the wooden pole. The back of his neck was then punctured by a wooden splinter on the pole. He hung about 25 feet in the air with his fall arrest system. He was hospitalized.",1
"An employee was using a machine for corrugated boxes when his right thumb came in contact with a conveyor belt, fracturing and lacerating it. He was hospitalized overnight.",1
"An employee fell from the top of a catwalk to the ground while going to clean a tanker truck, suffering severe body injuries. Fall protection was not worn at the time.",1
An employee was witnessing a vehicle test when a lithium-ion battery caught on fire. The employee inhaled smoke from the fire and chemical fumes from the halon extinguisher used to put out the fire.,1
"An employee was working on an encapsulation machine when a part closed on his finger. When he tried to remove his finger, skin and tissue were removed, requiring overnight hospitalization and surgery.",1
"On September 20, 2017, an employee was moving a two-step ladder when it folded unexpectedly, catching and amputating one of the employee's fingers in a pinch point.",0
"An employee was adjusting an energy-isolated industrial fan belt and pulley. The employee was manually rotating the motor and assembly when the employee's right middle finger was caught between the belt and pulley, lacerating and fracturing it.",1
An employee was attempting to clear dust from around a rotary valve when his right index finger entered the valve and was amputated above the first knuckle. The rotary valve plug was removed at the time of the incident.,1
An employee was checking the alignment inside a mechanical power press' pilot hole when the material moved and amputated his middle fingertip.,0
An employee was loading water heaters and fell from a freight cart resulting in a head injury.,1
An employee was working on a scaffold when it tipped over. He hit the ground and broke his leg.,1
"An employee was working on the backside of a breakdown mill, waiting for rubber to process through the mill so that it could be cut and sent back into the mill, when his right hand was caught between two rollers, amputating two fingers.",0
An employee fell approximately 10 feet onto a concrete slab while laying decking on joists because of windy conditions. He suffered broken ribs and a punctured lung.,1
"An employee was blowing down a chemical tank. As he was unhooking the connection line from the blower machine, he fell approximately 10 feet to the cement ground and may have hit the metal tank on the way down. He suffered impact injuries to the head and face and was hospitalized. Fall protection was not worn at the time of the incident.",1
An employee fell on and fractured her right knee in the hallway while running after a fleeing student.,1
"An employee was exiting the bucket of a bucket truck when he fell approximately 6 feet, striking an adjacent pickup truck and cinder block. He suffered a laceration to the left side of his head and broken ribs on his left side.",1
"An employee fell off a ladder while descending from a telephone pole, fracturing both ankles.",1
"An employee fell from a ladder to the ground, breaking a rib and puncturing his lung.",1
"An employee was operating an electro-pneumatic, air-powered, mold-controlled system. As the mold was coming out of the machine (the mold is heated up to 200 degrees), it became lodged between the doors. When the employee attempted to dislodge the mold, the doors slammed shut on his left hand, lacerating his hand and causing first degree burns on his left wrist and forearm. He was hospitalized.",1
"An employee began to feel ill, suffering leg and arm cramps, fatigue, and lightheadedness. He was hospitalized for dehydration.",1
An employee was drilling a hole into a fixture with a lathe on 9/21/2017. The employee leaned into the machine to line up the drill bit and the employee's shirt was caught in the worm-screw resulting in a left arm fracture and a stroke. The worm-screw was not guarded at the time.,1
"An employee slipped on elevated steel beams and fell 11 feet to the floor, suffering a broken left foot, sprained left knee, broken tibia, and torn meniscus in the right knee.",1
An employee was attempting to disconnect a pressurized air hose when blasting grit struck the employee's left eye and face. PPE was not worn at the time.,1
"An employee was cutting off different metal parts on a pipe using an 18-inch shear when the employee's left pinky finger became caught between the two blades, amputating it just below the first knuckle.",1
An employee was using a table saw when the blade lacerated his right finger.,1
"An employee was driving a powered industrial vehicle (PIV) into a pump meat cooler to retrieve a vat of product. As he maneuvered into position, the vehicle slipped on the wet floor and the employee was pulled out of the PIV. He was pinned between the PIV and a vat of product, suffering rib, vertebrae, and pelvic fractures.",1
"An employee was working inside the front cab of an airport fuselage when he tripped and fell on the aircraft's metal frame, injuring his back, neck, and head.",1
"An employee was rigging a steel casing for relocation when the casing slipped, causing the employee to lose balance. The casing hit the ground/wall, and the employee's right hand was caught between the casing and a solid object, amputating the middle and index fingers.",0
"An employee climbed into the shred trailer of a truck to clean out the shred portion when his arm was caught in the truck's conveyor belt, fracturing his arm and causing skin and tissue damage. He was hospitalized.",1
"An employee was walking when she stumbled and fell on a scale, breaking her left ankle and requiring overnight hospitalization.",1
"An employee was operating a lift with a man basket to install a drainage pipe underneath a bridge when the lift started to slide down a slope. The employee was then ejected from the man basket and fell approximately 20 feet to the ground, suffering abdominal and facial injuries.",1
An employee was removing brick debris from a conveyor line when his left pinky fingertip was caught and amputated between brick stacks.,0
"An employee was driving an aerial lift over a road and curb when the lift hit a bump or the curb. The employee then bounced out of the basket and was hanging by a harness and lanyard. The employee suffered left arm or wrist injuries, requiring hospitalization and surgery.",1
An employee was removing debris when one of his fingers was caught and amputated between two tables.,0
"A crew was attempting to hang a metal horse head on a pumpjack while the injured employee was sitting on a 12-inch beam (12 feet off ground). As the crew was lowering the head, it fell out of its saddle and smashed the employee's left arm, which became very swollen and possibly fractured.",1
"On September 21, 2017, an employee was sorting material on an unloading table when the employee's arm was caught between the loading arm and the table itself. The employee suffered contusions and was hospitalized.",1
An employee was mowing a field when the mower blade lacerated the employee's foot and lower leg.,1
"The injured employee was drying off excess sanitation water from the bottom of the nest plates on a filling machine. Her hand was next to the mechanism that lifts the cups out of the nest plates, referred to as the ""lift pad."" The lift pad pushed her right ring finger up into the hole as the nest plate was rotating smashing her finger and resulting in amputation of the fingertip and nail.",0
"On 9/21/2017, an employee was standing on a truck's catwalk hooking up a truck to a trailer when he lost his balance and fell about 3 feet to the asphalt ground. He suffered a cracked rib and collapsed right lung, requiring hospitalization.",1
"An employee fell through a roof deck to the concrete floor below, fracturing his legs and tailbone requiring hospitalization.",1
An employee was providing resident care at a group home when she got close to an open bottle of foaming disinfectant and suffered an asthma attack. She was hospitalized.,1
An employee was on a service call working on a lift gate when his pry bar slipped and crushed his right middle finger.,1
An employee was standing near concrete-crushing equipment when the ground gave way. The employee fell 10 feet and suffered a broken back.,1
"An employee was moving a product rack weighing approximately 1,000 pounds out of a smokehouse when the product rack fell and struck him in the face, resulting in a laceration and fracture. A connecting rail was not used to move the rack from the smokehouse rail to the hallway rail.",1
An employee's finger was amputated when it was caught in the point of operation of a hole punch machine.,0
"An employee lost balance and fell while stepping into a security post area, fracturing the right leg.",1
"On September 21, 2017, an employee was troubleshooting an HVAC system when the employee's elbow came in contact with an energized electrical wire (460-VAC). The employee was shocked and was hospitalized.",1
"An employee was troubleshooting a machine when he slipped and fell into its moving rollers, crushing and amputating his left pinky, ring, and middle fingers. The rollers were unguarded at the time.",0
"On September 21, 2017, an employee was exiting from the top of a tanker truck and fell from the truck's fixed ladder, suffering a concussion, rib fractures, and a possible collapsed lung. The employee was hospitalized.",1
"An employee was descending from an aft crossover to reach bolts on a rig conveyor when a bucket trolley struck his right leg and foot, breaking and lacerating his right leg.",1
"An employee was putting food into a hot deli case when the case's glass door fell and hit her head. She suffered a concussion and neck strain, requiring hospitalization. The door was not locked in the open position at the time.",1
An employee was using a chop saw to cut pieces of flooring when the saw blade partially amputated his left first finger digit.,0
"On September 21, 2017, an employee was readying gates for installation. While manually moving the slide, the employee's finger was caught in a gear, pinching and removing the skin on the fingertip.",0
"An employee was priming bolts in a stairwell while standing on a 6-foot step ladder. He had a paint can in one hand and a paint brush in the other hand. He fell as he was descending the step ladder, breaking two ribs and suffering a collapsed right lung. He was hospitalized.",1
"An employee was attempting to latch an elevator on a turbine. The elevator did not latch properly and opened/came off the joint turbine. When the employee tried to re-align the turbine, his thumb was caught and fractured between the turbine and the elevator.",1
An employee was walking near the dumpster and tripped over a curb resulting in injury to the left leg.,1
"On September 21, 2017, at approximately 9:20 p.m., an employee was cleaning a packing machine when the machine activated and amputated her left index finger.",1
"While pushing a box truck out of a building, an employee slipped and was run over by the truck tire, suffering a fractured left foot and right knee contusion.",1
"An employee was using a portable toilet when a nearby bulldozer reversed and struck him, injuring his head, chest, and pelvis.",1
"An employee used a wooden stick to release a clip on a trailer. The trailer released and pinned his arm, fracturing the mid-radius and lower radius.",1
"An employee was pulling wire via a fish tape into an electrical box in the ceiling when he went through a window (which had not been installed) and fell four stories down to the ground, suffering broken bones throughout his body, internal bleeding, and a head injury. He was hospitalized.",1
An employee was hooking a metal chain to a loader bucket when the loader operator began to lift the load. The employee's right thumb tip was then amputated by the chain.,1
"An employee was moving a sheet of 4x8 shoring board to the edge of a trench when he fell 8 feet into the trench, fracturing his right tibia and fibula.",1
An employee sustained a snake bite on the left index finger.,1
An employee had been working on/by an 8-foot platform ladder when she was found on the ground with a broken right arm.,1
"On September 21, 2017, an employee was placing labels on pallets when a forklift ran over his foot.",1
"An employee was lifting a chair to move it when her foot became caught in the chair and she fell. She fractured and dislocated her ankle, requiring hospitalization and surgery.",1
An employee was attempting to adjust a jack stand when the jack stand slipped and amputated his left middle finger.,0
"An employee was changing a 2-inch braided hose equipped with cam locks. The cam locks disengaged, and the employee was sprayed with steam and hot water, suffering second degree burns to both hands and the left arm, as well as possible second degree burns to the forehead and neck.",1
An employee was working in a Naval submarine simulator and was exposed to epoxy vapors and had trouble breathing.,1
"An employee was demonstrating how to use an ice cream machine to a new employee when her finger entered a hole in the machine, amputating her fingertip.",0
An employee was using a cut-off saw to cut scrap castings to fit into the recycling bin. The employee's hand was pulled in and caught between the hand tool and a rubber mat resulting in amputation to the first knuckle of the left index finger and lacerations to the middle finger.,0
"An employee was repairing a leak in a gas line. He was cutting the line when a flash occurred and severely burned both of his hands, requiring hospitalization.",1
"While processing detainees at a desk, an employee experienced shortness of breath and an accelerated heart rate due to heat stress.",1
"An employee was operating construction equipment to back fill an excavation. As he was backing up near a ventilator wall, his left leg was pinned between the wall and equipment, breaking it.",1
"An employee was using a grinding machine when the employee's hand contacted the grinding wheel, amputating four fingers to the first knuckle.",0
"On September 22, 2017, at approximately 2:15 PM, an employee was helping a coworker drive nails into a wood door using a nail gun when the door moved. The employee was then shot by the nail gun. The nail pierced the employee's left forearm to the bone.",1
"An employee was conducting well-servicing operations when a hammer union came apart and fell, striking and lacerating the employee's head.",1
"An employee was testing a transformer with a secondary voltage of 2,400 volts and suffered first and second degree burns to his right elbow from an arc flash.",1
"When assisting co-workers to move a wooden L-beam weighing 277 lbs. to the metal build table, the beam slipped and the employee tried to catch it. The employee suffered a partial amputation of the right ring fingertip.",0
An employee was replacing a diaphragm on a steam generator's feed pump when the 70-pound pump head slipped off a rack and amputated the employee's right ring fingertip (no bone loss).,0
"An employee and a coworker were using a bucket truck to remove two trees that had fallen on utility wires. The employee was cutting a tree limb when a piece of the tree fell and struck the employee, knocking him to the ground. He broke his hip and was hospitalized.",1
"An employee was standing near a load being suspended by a crane. While trying to move the top bundle, the employee's right first fingertip was pinched and amputated between two bundles.",0
"An employee was working on a cutting table when a roll of carpet fell off a forklift and struck the employee, who suffered multiple spinal fractures.",1
"An employee had repaired garage door rollers and was descending from mobile scaffolding when the scaffolding became unbalanced and tipped over. The employee fell to the concrete garage floor, landing on and fracturing both of his feet. He was hospitalized.",1
"An employee was cleaning seats when she stepped back and fell to the ground, breaking her right wrist. She was hospitalized and had surgery.",1
An employee was using a snap machine when it was activated via the foot pedal. The machine then amputated one of his fingertips.,0
"An employee was unloading items in a warehouse loft area when he lost his balance and fell approximately 15 feet to the warehouse floor. He suffered multiple fractures to his left leg, requiring hospitalization and surgery.",1
"An employee was pulling the concrete pump hose, lost grip on the pulling rope attached to the pump hose, and fell onto the metal decking resulting in a broken left arm.",1
"An employee was servicing gas pump equipment at a gas station when a fire occurred, burning both of his hands. He was hospitalized.",1
"An employee was troubleshooting a malfunctioning bander machine and was standing on the equipment frame when he lost his footing or grip and fell down between the equipment and frame. He hit the frame while falling, breaking his nose, ribs, and skull.",1
An employee was cutting a piece of pipe when it fell on his left foot. His foot had to be surgically amputated.,1
An employee was using a pocket knife to cut open a large sack when the sack slipped and the knife amputated his fingertip.,0
"An employee was attempting to remove lodged scrap from an in-feed conveyor when his fingers/hand were pulled into a nip point between the head pulley and the conveyor belt, amputating his left lower arm.",1
"An employee was removing a motor from the top of a pump inside a wastewater lift station. A come-along was turning the motor to free it from its housing on the pump when the employee's left hand was caught between the motor's bottom edge and housing on top of the pump, amputating the left ring fingertip and lacerating the little finger.",1
"While installing insulation on a roof deck, an employee fell about 24 feet, striking metal bracing on the wall and then the concrete floor. The employee suffered a head injury and was hospitalized.",1
 A 9-inch joint of pipe was stuck crossways on top of the kicker and the conveyor system between the pipe threading machine and the coupling area. The injured employee was assisting another employee in clearing the jam and was struck by the pneumatic kicker that kicks the pipe up onto the conveyor. The employee suffered multiple rib fractures on the left side and a possible hernia.,1
"An employee was using a stand-up forklift to move merchandise when her arm was caught between a wooden pallet and the forklift, lacerating her left bicep.",1
"On 9/22/2017, an employee was operating a chainsaw to cut a fallen tree into small pieces for removal when the chainsaw kicked back and cut his left-side pelvis. He was hospitalized and had surgery.",1
"An employee was opening a valve while standing on the platform when the employee fell approximately 3.5 feet to the ground, breaking ribs.",1
"On 9/22/2017, an employee was cleaning a bean canning filler discharge area when the employee's right little finger was caught and partially amputated in a chain and sprocket in-going nip point.",0
"An employee was guiding a PVC sheet out of a mold onto a transport system. The transport system was in motion when the employee's right hand was caught between the system's chain and sprocket, amputating the right pinky finger.",1
"An employee was climbing a structural ladder to access the first landing of a building when his hand slipped and he fell approximately 10 feet to the ground, breaking two vertebrae and his hip.",1
"An employee was inspecting the inside of a cargo truck at a loading dock when the truck driver began to drive away, causing the employee to fall off the dock. He broke his left ankle and injured his knee.",1
"An employee's left hand was caught by a pipeline that was being lowered by a rig, partially amputating his thumb, index finger, and forefinger up to the knuckle. He was hospitalized.",1
An employee was cleaning out a column dryer when his right index fingertip was pinched and amputated between the feed rollers.,0
"An employee was on top of the bank of an excavation when it collapsed, breaking his vertebrae and requiring hospitalization.",1
"On September 22, 2017, an employee was cutting flooring material on a table saw when the flooring material kicked out. His hand then contacted the saw blade, amputating his finger.",0
"On September 23, 2017, an employee was operating a machine and broke three fingers.",1
An employee was unjamming a seamer when it amputated the employee's right middle fingertip. The machine was active at the time of the incident.,0
"An employee was preparing to clean a clogged spray bar on a distributor truck (tack truck). When the employee removed the protective screen that covers the bolts securing the cover, hot oil sprayed onto the employee's right hand and arm causing second degree burns.",1
"An employee was lubricating a conveyor chain when his glove and subsequently left hand became stuck in the conveyor chain and sprocket, amputating his pinky, ring, and middle fingertips.",1
An employee was attempting to push a steel cart underneath a steel table and caught a finger between the table and the cart resulting in amputation of the upper part of his right ring finger.,0
"On September 23, 2017, at approximately 6:40 an employee was helping another employee to remove build up on an energized fabric cutter roller using a putty knife. The putty knife and the employee's hand were pulled into the knives, resulting in amputation of the distal tip of the right middle finger. The machine was not guarded or locked out at the time.",0
An employee was operating the Danish sleever and amputated the right thumb tip and nail. The machine was guarded at the time.,0
An employee was cutting wood using a table saw and amputated the left index finger and thumb.,0
An employee was slicing cucumbers on a mandoline slicer and severed the tip of her right middle finger.,0
An employee amputated his right middle finger while working in the compounding unit as he was prepping to clean a product tank.,0
"An employee was working on a rig site when a thunderstorm struck the area. Because of extremely high winds, the rig was shut down and everyone was told to go to the muster area. A trailer turned over on its side and struck an electrical line at the muster area, energizing the trailer. When the employee reached the muster point, he contacted the trailer and was electrocuted, requiring hospitalization.",1
"An employee was holding a manlift while a contractor changed a light bulb. The manlift tipped over and fell onto the employee, fracturing the left leg.",1
An employee was replacing a light bulb in a parking facility using an aerial lift. The lift tipped over and the employee fell striking his head on the ground. The employee was hospitalized for a head injury and lacerations.,1
"An employee was stepping out from a cash register when she tripped on a trash can and fell to the floor, fracturing her femur.",1
An employee was offloading product from a delivery truck and fell off the back of the truck resulting in a head injury.,1
"An employee was cleaning a sausage ribbon blender when it engaged, amputating the employee's right index finger.",1
An employee was dressing a mannequin. The employee was holding a common/T-pin in her mouth and swallowed it resulting in internal damage.,1
"An employee was in a customer's attic performing installation work. At approximately 2:00 p.m., the employee began to feel ill and lightheaded. The employee was hospitalized for heat stress and low potassium.",1
An employee was rolling tubing from the pipe rack onto the pipe wrangler. The pipe rack was not flush with the wrangler due to the contour of the ground. The tubing came down while his hand was underneath the pipe rack and pinched his left ring finger resulting in a partial amputation.,0
"Employees were preparing to adjust the blade on the grinder machine. Product was not completely clear from the grinder which prevented the carriage blade from rotating. An employee climbed up onto the carriage and used his weight to force the carriage blade to move. When it did, the employee stepped off the carriage and his left big and second toes were amputated by the blade.",1
An employee was cleaning two application rollers and caught his left index finger between the rollers resulting in a partial amputation. The equipment was not guarded or locked out at the time.,1
An employee was loading apples into bins using a hydraulic lift. The employee's hand was on top of the stop bar as the lift was raising a load pinching his left ring finger and resulting in amputation.,0
"An employee was disassembling a crane and lattice boom when the boom fell onto the employee's steel-toed boots crushing toes and amputating part of the big toe, pinky toe and the fourth toe.",1
"An employee heard a commotion in the parking lot. When the employee asked three individuals to leave, they assaulted him. The employee was hospitalized with a broken leg and injured ear.",1
"On September 24, 2017, an employee fell from a skid steer to the ground, suffering a broken hip and requiring hospitalization.",1
An employee amputated a fingertip while cleaning the lint cleaner on a machine. The machine was not in operation at the time.,0
"An employee was servicing a customer's box truck on the side of the road. The vehicle was up on a jack and the employee was working under it. The jack sunk into the ground, causing the truck to fall and pin the employee underneath it. The employee was hospitalized for a fractured back.",1
"An employee was dismantling a scaffold. While walking across two 7' steel scaffold planks, the planks separated and the employee fell 18 feet through the gap to the concrete surface below. The employee sustained a fractured left clavicle, fractured arm and a collapsed lung.",1
An employee was repairing the chocolate pump. The employee's hand was in the machine when it was energized resulting in amputation of the right index fingertip.,0
An employee was climbing down a ladder and lacerated his left arm above his elbow on an air conditioning duct.,1
"An employee was walking adjacent to the induction belt, tripped and fell fracturing the right hip.",1
"An employee was walking near a mobile home that had loose plastic and a large piece of 1x2 wood when the wind blew the plastic and the wood. The wood then struck the employee's abdomen, injuring his spleen and requiring hospitalization.",1
An employee was operating the laser cutting machine and amputated the right pinky finger.,0
"On September 25, 2017, at 5:00 p.m. the injured employee was loading a semi-trailer at the dock of the facility using a forklift. The truck driver pulled away from the dock with the forklift still in the trailer section of the truck. The forklift and the employee fell out of the back of the truck onto the concrete parking lot. The employee suffered a lumbar fracture and a spinal injury.",1
An employee was loading wooden beams onto a trailer when one of the beams fell from the bed of the trailer and struck the employee. The employee fell with the beam on top of him resulting in a fractured pelvis and other lower extremities fractures.,1
The employee was operating a mechanical power press when the machine cycled and amputated the employee's right index finger.,0
"An employee was trying to help a coworker who fell when the employee also fell, fracturing two vertebrae and requiring hospitalization.",1
An employee was struck by a forklift on 9/25/2017 in the warehouse area.,1
An employee was changing the die on a roll forming machine. The drive shaft fell pinching the employee's left pinky finger in a pinch point resulting in a fingertip amputation.,0
An employee was on top of a hopper cleaning concrete from the chute and fell approximately 13 feet into the chute. The employee suffered fractures as a result of the fall.,1
An employee was using a lathe to coil cable when her gloved finger was caught in the cable. Her fingertip was amputated and her wrist broke.,0
"An employee was troubleshooting equipment. He operated one cycle and then turned off the machine and unplugged it. While the machine was still winding down to a stop, he caught his left middle finger in the gear resulting in a fingertip amputation. The machine was not guarded at the time.",0
An employee was troubleshooting a plugged dust collector and amputated the left ring fingertip in the metal air lock. The guard was not in place at the time.,0
"An employee was installing sprinkler pipe. A 10-inch pipe weighing 1,000 lbs. slipped off the trackhoe as the pipe was being lowered and struck the employee causing a severe leg injury.",1
"An employee was working underneath a truck, installing a flat spring, when the jack failed. The employee's left index fingertip was then pinched and amputated in the flat spring.",0
An employee was watering plants in the garden area and tripped and fell over a water hose. The employee was hospitalized with a broken pelvis and stitches in the elbow.,1
An employee suffered the amputation of two fingers while working around the sand mixing machine in the no-bake department.,1
Three employees were manually lowering a heavy duty ramp on the back of a trailer. The ramp cable assist was not attached causing the ramp to fall suddenly and strike the injured employee's right leg fracturing the femur.,1
"On September 25, 2017, at approximately 11:15 AM, a crane operator was moving fabricated steel material when the material shifted as it was being lowered and slid off its resting place. The material struck an employee's right foot, breaking it and cutting a toe.",1
"An employee was walking down a staircase, tripped and fell breaking both legs.",1
"An employee was unloading 5-gallon pails from a pail conveyor roller when his left hand became stuck in the pail rollers, amputating his middle fingertip. The rollers were unguarded at the time.",1
An employee fell approximately 15 feet from a ladder when he lost his balance while removing hurricane shutter panels. He injured his back and had surgery.,1
"On 9/25/2017, an employee was cleaning a chill cooler with bleach when he experienced dizziness and lightheadedness, later requiring hospitalization.",1
"An employee suffered a lower back strain while bending over to pick up marketing samples, requiring hospitalization.",1
An employee was placing a part in the mechanical power press die area and crushed his left middle finger in the closing die.,1
An employee was standing on a plastic mat that was on a tile floor and fell breaking a hip.,1
"An employee was feeding steel into a machine when a coworker working in the front of the machine reversed another piece of steel, which kicked back the employee's piece of steel. The steel struck the employee's stomach resulting in a liver injury, requiring hospitalization.",1
"An employee was removing carpet tiles from a conveyor belt when he tripped over carpet tiles on the floor and his hand made contact with the belt, partially amputating one of his fingertips.",0
An employee fell from the passenger side step of a truck and broke his arm.,1
"An employee was descending a ladder after placing a scaffold plank when he lost his footing and fell approximately 15 feet to the ground, breaking his ribs and pelvis.",1
"An employee was checking the belt tension on an AC unit when the unit activated, causing his right index fingertip to be pinched and amputated between the belt and flywheel.",0
"An employee was standing on a three-stair ladder with a handrail near a conveyor that was being loaded with boxes. While leaning over the side to clear some boxes, the employee fell and hit their head on the conveyor, lacerating it.",1
Employees were replacing the membrane on a flat roof when an employee became affected by the heat. He was hospitalized overnight with heat exhaustion and dehydration.,1
"On September 26, 2017, an employee became dehydrated due to heat while working in a booster production nutsche area. He was hospitalized.",1
"An employee was attempting to catch a falling glass bowl when it broke in his hand, lacerating his wrist and requiring surgery.",1
"An employee fell while performing an installation in a home attic, breaking ribs on the right side.",1
An employee was collecting garbage when he started to feel cramps in his stomach and legs. He was hospitalized due to dehydration.,1
An employee was engaged in horseplay and was turning to run when he tore a tendon and broke two bones in his right foot.,1
"An employee was attending a scaffold class when he fell from the scaffold to the ground, sustaining head, shoulder, and back injuries.",1
"On September 26, 2017, at around 4:10 PM, an employee was shoveling dirt into concrete forms for a crawlspace. The employee was observed stumbling in the trench and was advised to go sit in the truck. The employee was hospitalized for heat illness and dehydration.",1
An employee was operating a torque gun on an assembly line when the employee's glove and then left index finger were pulled into the spindle of the gun. The employee's finger was amputated.,0
An employee was exposed to carbon monoxide from a malfunctioning vent and hospitalized for carbon monoxide poisoning.,1
"On September 26, 2017, an employee was moving a tow dolly by hand. He was positioned downhill of the dolly when it began to roll down the slight grade. When he attempted to stop the dolly, it swung toward him. He stepped onto the dolly as it collided with a larger trailer and fell backward, injuring his back and shoulder and requiring hospitalization.",1
"An employee was standing on a feather deck platform checking the feather meal when a coworker opened the wrong feather cooker door. The heat from the open door caused second and third degree burns to the employee's right arm, face, and back.",1
"After using bleach mixture from a spray bottle to clean the chiller room, an employee suffered from chemical-induced pneumonia, requiring hospitalization.",1
"While working on the take-out arm of a glass forming machine, an employee became lightheaded, requiring hospitalization for dehydration and heat exhaustion.",1
"While walking in the sorting/palletizing area, an employee slipped on a crushed aluminum can, fell to the concrete floor, and fractured the hip.",1
An employee was working in the production area when he began showing signs of heat-related illness. He was hospitalized for dehydration.,1
"An employee was trying to fix the fabric on a machine when his hand was pulled against the guide, suffering severe friction burns.",1
An employee was using a meat slicer to cut tomatoes when the machine cut and amputated the employee's right thumb tip.,0
An employee was walking down an aisle when she slipped on a puddle of water  and fell onto the floor. She broke her left femur and had surgery.,1
An employee was driving a standup PIV and collided with a stationary standup PIV. The employee sustained three broken toes and a laceration to the left foot.,1
An employee was picking up boxes of merchandise and suffered a hernia.,1
"On September 26, 2017, an employee was attaching a nitrogen gas regulator to a chlorine gas bottle when the chlorine gas started venting out. He suffered symptoms of hypoxia and respiratory distress.",1
"An employee was operating a band saw to cut meat and amputated his right thumb, index and middle fingers. The saw was guarded at the time.",1
An employee was cleaning meat from the band saw and contacted the blade cutting his right index finger.,1
"An employee had just started unloading onions. The employee slipped and caught his hand on the machine resulting in amputation of the left pinky, ring and middle fingers.",0
"An employee stepped into the footing of an excavated site that had wet concrete, which caused second degree burns to his knees and lower legs. PPE was not worn at the time.",1
"An employee tripped over a cement bag and fell to the ground, bruising his knee and scraping his left elbow.",1
"An employee was operating a rolling mill when the employee's left hand and elbow were pulled into a coil that was being back-wound. The employee was hospitalized with left hand, finger, and elbow injuries.",1
"An employee was loading veneers onto a table, which goes onto a rolling conveyor belt. As she was setting the table onto the conveyor belt, her left pinky finger was pinched between the table and the conveyor belt. Her finger broke, requiring hospitalization and surgery.",1
"On September 26, 2017, an employee became dizzy, disoriented, and lightheaded due to heat stress while delivering food service products. He was hospitalized.",1
An employee was checking the position of a radio tower when it began to collapse. He jumped off the collapsing tower and shattered his ankle.,1
"An employee was removing a tarp from a roof when he lost his balance and fell 10 feet to the ground. He fractured his jaw and wrist and suffered broken teeth, requiring hospitalization and surgery.",1
"An employee was reversing a stand-up forklift when the employee collided with another reversing forklift, breaking the left forearm and requiring surgery.",1
"An employee was removing dead limbs from a tree when his lanyard and/or rope was cut, and he fell approximately 20 feet to the ground. He was hospitalized.",1
An employee was bitten on the shin by a rattlesnake while performing an environmental survey.,1
"While walking on a bridge platform, an employee fell about 13 feet to the rocky surface below, breaking both wrists and a leg. The employee was hospitalized.",1
An employee was riding on the back of a trash hauler in a residential area when he fell off the hauler and hit his head on the pavement.,1
"An employee was loading steel coil material onto a skid when his right leg was pinched between the hydraulic ram and the skid, fracturing his right foot.",1
"An employee stumbled while walking down a hallway and fell, fracturing the right shoulder.",1
"An employee was giving a tour of the warehouse, turned in a different direction and felt a pain in his back. The employee was hospitalized.",1
"On 9/27/2017, an employee was preparing to lift a 300-pound, 12-foot steel column when the column became hung up. The tie wire used to lift the column then became stressed and broke, causing the column to fall and strike the employee, who suffered broken bones.",1
"An employee was using a scouring pad to clean out meat in the door of a blender when the employee's left middle finger was caught in the blender ribbons, amputating the distal tip. The blender was not locked out at the time of the incident.",1
"An employee was inspecting an iron beam that was suspended overhead by a forklift when the beam fell and struck him, breaking his ribs, pelvis, vertebrae, and leg. He was hospitalized.",1
A saw horse collapsed and struck an employee. The employee suffered a head injury and was hospitalized.,1
"An employee was walking in the parking lot when he stepped off the ramp/curb and rolled his ankle, falling to the ground and suffering a gash. He was hospitalized and had surgery.",1
"An employee was working approximately 6 feet above ground level servicing a pumpjack when he lost his footing and fell to the ground, fracturing three ribs.",1
"An employee was attempting to detach two items that became stuck together on adjacent conveyor lines when the employee became pinched between them, suffering rib and pelvic fractures.",1
"An employee was on a ladder installing a light fixture when he received an electrical shock, causing him to fall off the ladder to the ground. He suffered a back injury.",1
An employee was hospitalized after inhaling anhydrous ammonia. A pipe broke resulting in the anhydrous ammonia release.,1
"An employee was working near a running lawnmower when a rock flew out from under the lawn mower and struck the employee in the left temple, causing a concussion.",1
"An employee was attempting to remove fat stuck in the small intestine splitter when her left index finger contacted the energized blade, amputating the finger above the first knuckle.",0
An employee was manually moving 55-gallon drums full of polyurethane off a pallet when his right little fingertip was pinched and amputated (no bone loss) between two drums.,0
"An employee was attempting to climb a ladder onto a trailer when he slipped, tried to catch himself, and placed his right hand between the ladder and the trailer. His weight caused the space between the ladder and the trailer to flatten, and his right pinky finger was caught and partially amputated between the ladder and trailer.",1
An employee was using a punch press to punch cable when it amputated the employee's right index fingertip.,0
"An employee was attempting to remove a piece of fat that was stuck on the bottom side of a small intestine splitter when her left index finger made contact with the energized blade, amputating the fingertip above the first knuckle. The cutting blade was unguarded at the time.",0
"An employee was undergoing parachute readiness training when mechanical turbulence led to a hard landing. The employee impacted the ground and suffered a concussion and multiple fractures, requiring hospitalization.",1
"While doing touch-up painting on a roof, an employee slipped and fell approximately 15 feet to the concrete below, suffering a head injury.",1
"An employee went to cool the mill temperature and opened the feeder door to apply water when he was engulfed by flames on the feeder deck. He suffered second and third degree burns to 30 percent of his body, including his arms, torso, and head.",1
An employee was attempting to clear a jam in a screw conveyor when his arm was pulled into and caught in the conveyor. His arm had to be surgically amputated below the shoulder.,1
"An employee was sliding a tote under a conveyor when the employee's head struck the side guard of the conveyor, resulting in a possible concussion. The employee was hospitalized.",1
An employee was attempting to move two fittings that were blocking an elevated walkway when he tripped and fell through the guardrails and down eight stories onto a portable toilet. He then rolled onto the ground. He broke his leg and pelvis and dislocated his hip.,1
An employee was assembling a final drive on a tractor and crushed two fingers in a gear resulting in partial amputation to both fingers.,0
"An employee walked around a parked forklift and tripped over the fork tines, fracturing the right elbow. The employee was hospitalized and had surgery.",1
"An employee tripped on an office chair and struck his knee on a table, tearing his quadriceps tendon and requiring hospitalization.",1
"An employee was standing on the forks of a forklift approximately 4 feet above the ground looking into a refuse container when he fell off the forks to the ground, injuring his left-side ribs, knee, and hand, and suffering a possible fracture to his spine.",1
"An employee was placing boards in a planer when a board slid over and pinched the employee's finger between it and the guide fence, amputating the fingertip.",0
"An employee was loading sticks of material into a multi-saw when a stick became jammed as it was being fed it into the saw blade area. She opened a side door hatch to access the feed compartment and used her fingers to try and adjust the jammed stick. The machine’s pneumatic feeding system pushed air into the material feed compartment, which then pushed the stick and the employee’s left index finger into the rotating saw blades. Her left index finger was amputated just below the first 
knuckle.",1
An employee was hanging aerial fiber. He was ascending a ladder and fell 4-10 feet. The employee was hospitalized.,1
"An employee was filling a tanker trailer with used oil that was being pumped from a larger stationary tank. He climbed the trailer-mounted ladder to open the dome hatch to check on the filling process. When he released one of the dome hatch cover clips, the lid was blown open from built-up pressure inside the tank. He was thrown from the ladder to the ground, hitting his head and neck and requiring hospitalization.",1
"An employee fell approximately 15 feet to the ground while performing maintenance on lights, fracturing his L1 vertebra.",1
"An employee fell down the steps while walking into the facility, breaking the right tibia and fibula and damaging a left ankle ligament.",1
A temporary employee was operating a UV coating machine and amputated a finger.,1
"An employee was pushed by a patient and fell to the ground, suffering contusions to the knees and legs.",1
A maintenance employee was on an extension ladder cleaning out gutters when he fell approximately 25 to 30 feet and broke his shoulder.,1
"While making a delivery at a customer's business, an employee climbed over a fence and was injured.",1
"While dropping a tailgate on a dump truck, an employee's hand was caught between the tailgate and chain, amputating the right index finger.",0
"On September 27, 2017, an employee and coworkers were attempting to load a crane onto a truck when the lifting strap broke and an outrigger fell on the employee's leg, resulting in a partial amputation below the knee.",0
An employee became dehydrated from heat exhaustion and was hospitalized.,1
"An employee became dehydrated and suffered heat exhaustion while delivering groceries, requiring hospitalization.",1
"An employee tripped and fell on a speed bump in the parking lot, breaking her right leg and requiring hospitalization.",1
An employee was roping an escaping cow and suffered a fractured leg and ankle.,1
"On September 27, 2017, an employee was repairing brakes on a semi trailer when the brake chamber came off and struck the employee in the face causing fractures above the eye socket, a cut to the eye, chipped teeth, and a broken nose.",1
"An employee was moving a horizontal idler roller into a skid pan when a colleague tried to assist him. One end of the idler then came down and smashed the employee's middle finger underneath his glove. He suffered a laceration and broken bone, requiring hospitalization. Later, his fingertip had to be surgically amputated.",0
"An employee was washing out a cement mixer when he slipped on a slick area and fell, fracturing his right tibia.",1
"An employee was opening a pipe cap on a pneumatic trailer to unload plastic pellets when the pipe cap and plastic pellets released under pressure and struck him. He suffered contusions and lacerations to the chest, arms, and legs.",1
An employee was pulling string on the side of a new road to be paved when a reversing tractor hit the employee. The employee suffered a head fracture.,1
"An employee was working near an unguarded chain drive when he slipped and fell. His left hand was caught by the machine, partially amputating his left index finger.",0
"An employee was filling a tire with air when the tire exploded, breaking a bone in his left hand and lacerating his left knee. He was hospitalized. No tire cage was used at the time of the incident.",1
"An employee was testing wire connections on a transformer when an electrical backflow occurred, shocking the employee. He suffered electrical burns to his hand and side. The shock also caused him to fall and fracture his shoulder and T9 vertebra.",1
An employee was attaching a shackle and sling to a tank when a crane operator began to take up slack in the sling. The employee's right index fingertip was then caught and amputated between the shackle and sling.,0
"An employee was traveling to another floor when she slipped and fell onto a pallet, injuring her left arm and requiring hospitalization.",1
"An employee was attempting to place a core plug onto a core of newly slit paper when the plug fell onto a running conveyor belt. As he attempted to retrieve the plug, the belt caught his finger and drew it into a pinch point, amputating his left middle fingertip to the first major knuckle.",0
"An employee was bitten by a dog while delivering mail, suffering bites and lacerations to the head, face, arm, ears, and shoulders. The employee was hospitalized.",1
An employee was pulling protectors off of a casing when a forklift operator dropped pipes on a pipe rack. One pipe rolled over and smashed the employee's finger.,1
An employee was shot in the intestines by a temporary employee in the locker room.,1
"An employee was attempting to get water from a pallet when the pallet rolled forward on gravity-fed rollers and pinned the employee's foot, breaking the ankle and a toe.",1
An employee's left index finger was caught and amputated in a conveyor's unguarded chain drive.,0
An employee was standing on top of a concrete wall to receive a hoisted steel member when he lost his balance and fell 14 to 15 feet to the soil below. He suffered multiple contusions to the body with minor facial lacerations.,1
"An employee was grading rework parts and placing the parts on the conveyor of a drum and thigh cutter machine when his right hand contacted the machine's energized blades, amputating it at the wrist.",0
"An employee was in a boat, inspecting a pipeline, when the boat hit something in the water and ejected the employee from the seat. The employee hit the boat floor and suffered a forehead laceration and fractured left wrist.",1
"An employee was attempting to unplug an air compressor from a wall when the electrical socket was pulled out of the wall. As he attempted to remove the plug, he received an electrical shock.",1
"An employee fell 15 feet to the ground while dusting exposed beams, suffering a separated shoulder and lung aspiration. He was wearing a body harness but was not tied off at the time of the incident.",1
An employee fell off a bucket truck while going up the truck steps to get into the aerial bucket lift.,1
An employee was operating a horizontal band saw when the blade amputated his middle and index fingers.,1
"An employee was lowering a lift gate to retrieve empty milk crates when the gate's hydraulic line broke and the lift gate came down on her lower left leg, lacerating it. She was hospitalized.",1
An employee was using a table saw to cut insulation board when the insulation board kicked back and punctured his abdomen.,1
"An employee was delivering rebar to a construction site. He tilted the truck bed to unload the rebar but it was stuck in place. He was attempting to loosen it with his foot when the rebar caught his pant leg and sent him to the ground, breaking his right ankle.",1
"An employee was operating a stand-up forklift and going into a freezer. As he made a left turn, his left hand was caught between the forklift frame and the freezer compartment, severely cutting his left arm.",1
"An employee was standing at the end of a jumbo press, which had a flat roller holding 200-pound boxes. The roller with the boxes ran over and crushed the employee's left foot.",1
"An employee was operating a reach truck when he hit a pallet of empty kegs. He attempted to catch a falling keg with his left hand, but the keg crushed and broke three of his fingers, requiring surgery.",1
"An employee and several coworkers were changing out a utility pole when the pole snapped. The pole and energized electrical lines fell and struck the employee, causing an electrical shock and burns.",1
An employee was operating a winder machine when his left hand was caught by the roller. He suffered wrist and forearm fractures.,1
"An employee contacted live electrical wiring during pole lighting repair work, suffering electrical burns that required hospitalization.",1
"An employee was manually moving a scissor lift when it rolled over his ankle, breaking two ankle bones. He was hospitalized and had surgery.",1
"An employee was working on the hydraulic line of a loader when the loader's bucket fell on the employee's foot, amputating some toes.",0
An employee was trimming wooden dowels at a trump saw when the saw guard struck the employee's right index and middle fingers. Part of the right middle finger had to be surgically amputated.,0
The employee added a liquid drain cleaner to the casing check valve to remove scale build up. The employee opened the system and hit the hammer union between two ball valves to relieve pressure that caused residual chemical in the line to splash back onto the employee's face and body. The employee suffered chemical burns to the face and body.,1
"An employee was holding a fixed centralizer while casing tongs were being used to join together casing when the centralizer slipped from his hand. As he attempted to grab it, his fingertip was caught and amputated in the casing tongs.",0
"An employee was fixing a spacer on a stack of 2 x 10's when a few of the 2 x 10's fell on his left leg, breaking his tibia and fibula. He was hospitalized and had surgery.",1
An employee received second degree burns from steam from the coker drum while performing housekeeping duties.,1
"An employee was removing an exit sign, received a shock and fell from the ladder. The employee was hospitalized for a left arm injury and a cardiac injury.",1
"An employee was unplugging a chipper when the employee's right hand made contact with the chipper knives, amputating the distal tip of the small finger.",0
"A temporary employee was removing folds from the plastic sheet/film product web that was running through the greenhouse rewind machine. The employee's right foot slipped and was caught in an ingoing nip point between rotating rollers. The employee sustained compound fractures to his lower leg, ankle and foot. The rollers were unguarded at the time.",1
"An employee suffered from heat stress while working on a scaffold and stripping insulation, requiring hospitalization.",1
"On 9/29/2017, an employee was attempting to install a pipe onto a wellhead when the pipe fell. As he attempted to shield himself from the falling pipe, his left little finger was caught between the falling pipe and the wellhead, amputating the fingertip.",0
An employee was bringing a suspended scaffold down to the ground when the attachment broke. The employee fell to the remaining platform and fractured his heel.,1
"On 9/29/2017, an employee was spraying insulation to the interior walls of an attic. The employee was standing on a 2 x 6 plank, which had been set on the guardrails of a floor opening, when the plank cracked and the employee fell approximately 14 feet to the lower level. The employee sustained a head contusion and fractured vertebrae.",1
An employee was climbing down a gantry crane and knocked out the gantry pin pinching his finger resulting in amputation of the right index and middle fingers.,0
An employees thumb tip was crushed and amputated in a machine.,0
"On September 29, 2017, at 4:30 PM, an employee was kneeling and setting up a hydraulic compacting press with his left hand on the control panel. As he moved to the standing position, his left hand flipped the core rod switch into the down mode. The core rods then moved down and partially amputated his right little finger.",0
"On September 29, 2017, an employee was exiting a scale house when he tripped and fell down the stairs, breaking his ribs and puncturing his lungs. He was hospitalized.",1
"An employee's work truck was disabled on the side of the road. He set two jacks under the bumper and crawled under the truck to place a jack under the axle. While he was under the truck, one of the jacks slipped, causing the truck to fall on him. He suffered 16 broken ribs, a broken sternum, and a broken left scapula.",1
"An employee was making a bed when she tripped on the sheets and fell to the floor, injuring her right shoulder and back.",1
An employee was performing regular maintenance on a die machine when hot melted plastic fell from the machine and landed on his face. He suffered second and third degree burns on his face and was hospitalized.,1
An employee was using an oxygen/acetylene torch in a small walk-in cooler when the employee developed breathing problems and lung aspiration from the fumes or smoke. The employee was hospitalized.,1
"An employee was monitoring a tag line while a blade of a wind turbine was being hoisted in the air. The tag line came undone and struck the employee in the chest sending the employee 15 feet in the air. The employee suffered two skull fractures, two broken arms, a neck fracture, and a broken rib.",1
An employee was cutting meat with a band saw when the saw blade partially amputated the employee's right index finger.,0
An employee received an amputation. ,0
"An employee was installing hurricane shutters when a metal reel fell and struck the employee's right hand, crushing the index finger. The finger was surgically amputated.",1
"An employee drove a four-wheeler vehicle to an anhydrous plant to close a leaking valve. When he arrived at the site, he was overcome by the chemical smell and left the area. While he was driving away, the four-wheeler crashed. He broke his collarbone and wrist and suffered facial injuries, requiring overnight hospitalization.",1
"The injured employee and another employee were working from ladders to stock groceries when the employee slipped and grabbed the injured employee's ladder, causing her to fall to the ground. She suffered back pain.",1
"Employees were operating a bond tool. The employees were setting up counter weights to the 53K spar. Upon lowering the counter weight nest, the weight dropped from position and the employees were unable to set the counter weight into proper position. An employee had a hand on the counter weight nest and was pinched between the actuator and block resulting in a finger amputation.",0
"An employee was inspecting product inventory and contacted a rotary valve resulting in amputation of the right index, middle and ring fingertips.",0
"An employee had unlocked a bi-fold door and opened it when the locking mechanism hit him in the head/face and he fell to the ground, requiring hospitalization.",1
An employee fell and broke his left wrist. The employee was hospitalized for surgery.,1
An employee was driving a truck on the gravel road near the water treatment pond. The employee lost control of the truck and it rolled over. The employee sustained a head injury.,1
"After shutting down and cleaning an extrusion chrome roll, an employee restarted the extrusion line. The extrusion sheets were fully threaded and winding when the employee's right hand contacted the sheet pull roller, amputating the first digit of his right thumb.",0
"An employee was scraping wallpaper off the wall in an apartment while standing on a kitchen countertop. As he was descending from the countertop onto a step ladder, he lost his balance and fell about 3 feet to the floor, breaking his right hip, spraining his right wrist, and straining his right shoulder. He was hospitalized.",1
"On September 30, 2017, at approximately 1:30 p.m., an employee was cleaning vines from a conveyor when the employee's right arm was caught in the conveyor, breaking the arm and hand.",1
An employee was lifting an H bar when his hand slipped and landed on the dock. The H bar then came down on his right hand and amputated his middle finger.,1
"An employee was delivering a parcel at a rural residence when a dog bit the employee's left hand and shoulder, causing lacerations that required hospitalization and surgery.",1
"An employee was hand drying cars after they came out of a car wash. The employee was walking backward close to the vehicle before it left the conveyor when his foot was caught between the moving conveyor chain and the side rail. His Achilles tendon tore and later became infected, requiring hospitalization.",1
"An employee slipped and fell on a wet floor, fracturing her right knee. She was hospitalized and had surgery.",1
An employee fell from the back of a rental truck while sweeping it out. He sustained a brain hemorrhage and was hospitalized.,1
"An employee was changing the die on a four-post press that was being supported by a block when his elbow knocked out the block. The top of the die dropped and crushed his left thumb, resulting in a partial thumb amputation.",0
An employee was troubleshooting a leaky blaster. He slipped on the oil and fell into the machine catching his right hand in the unguarded chain and sprocket resulting in a broken index and pinky finger and lacerations on the ring finger. The blaster was not locked out at the time.,1
"While walking around a corner, an employee tripped and fell over loose shelving leaning against a gondola, striking a wooden display barrel and then the floor. The employee suffered a hip fracture and torn rotator cuff, requiring hospitalization.",1
"An employee was climbing onto a scaffold when he tripped on bricks laying on the scaffolding platform and fell approximately 6 feet to the ground below, fracturing multiple right-side ribs and contusing his thorax. He was hospitalized.",1
An employee was torch cutting a tank when residual fumes ignited burning the employee's abdomen.,1
"An employee was walking away from a patient's bed when the employee's foot was caught in the bed's control module cord. The employee tripped and tried to brace the fall with their hands, breaking both wrists.",1
"An employee was demonstrating how to install a blue tarp safely when he slipped on the tarp and fell, tearing ligaments in his neck. He was hospitalized and had surgery.",1
An employee was cutting a piece of wood form with a circular saw when the saw kicked back and amputated the employee's left pinky finger.,0
An employee was pulling linen from a client bed when she tore a ligament in her right hand.,1
"An employee went to clean a de-panner chain with a rag when the chain caught the rag. His right middle finger was then pulled into the chain, amputating a finger.",0
"An employee was working in an elevated bucket stringing electric wire when the wire came out of the stringer/keeper and fell on the employee's right forearm, breaking it.",1
"An employee was using a water hose to clean the inside of a walk-in freezer. The water turned to ice and the employee slipped on it, suffering a broken hip.",1
"An employee inadvertently struck a wall-mounted fire extinguisher, which then dislodged from the wall and struck the employee's left hand, fracturing the pinky finger and requiring surgery.",1
An employee was injured when a fight broke out at work.,1
"An employee was escorting an unruly fan when the fan punched him, causing him to fall to the floor. He fractured his hip and bruised and lacerated his face, jaw, and chest.",1
"An employee was moving a rack full of meat from a rail onto the main rail. When the rack was passing through the switch, the switch got out of alignment and the rack fell to the floor. The main rack support hit the floor and bounced back crushing the employee's right foot.",1
"An employee was exiting a vehicle when the vehicle rolled back on the employee resulting in fractured ribs, punctured lungs and a fractured cheek bone.",1
"An employee was dumping garbage out of a tipster (a plastic garbage can on wheels) that had a crack. As the employee was putting the tipster back down, the employee's right index fingertip was caught and amputated in the crack.",0
"An employee was manually rotating an extruder machine's flywheel to align the hole with a pin. The flywheel rolled, and the employee's right middle finger was caught between the extruder's belt and pulley, amputating it just behind the nail.",0
"An employee was operating a leather sewing machine when a cardboard guard dropped off the machine. As he reached to the floor to pick it up, his left pinky fingertip was caught and amputated in the drive belt where the cardboard guard had been.",1
"An employee was coming out of a bus and saw something laying on the ground. He was stepping to the side to miss the object when he fell and twisted his ankle, fracturing it and requiring hospitalization.",1
"An employee was operating a pallet jack with a battery extractor attachment to change out forklift batteries. The employee stepped off the back and was pinned between the pallet jack and a railing, fracturing both legs.",1
An employee suffered a left index fingertip amputation while operating a punch press.,1
"An employee was working at a winder, cutting a roll of plastic film, when the shaft moved and caught his right arm, pulling it into the roll and dislocating it. He also suffered torn tendons and ligaments in his right arm.",1
"An employee was using a manipulator/hoist to lift a mower deck off an assembly table when the mower blade became caught on an attachment on the table. The table then lifted with the blade as the deck was rising. The employee went to push the table back down and release it from the blade. At the same time, the controls were activated to lower the manipulator/hoist. The employee's left thumb was then pinched between the table and the manipulator/hoist, amputating the distal portion of the thumb just below the nail.",0
An employee fell off an order picker while retrieving product from a shelf and suffered broken ribs and a concussion. The lanyard was not attached to the body belt at the time.,1
"An employee took a vacuum of powder to the burn pit where another employee had been burning scrap wood, old pallets and boxes. The employee dumped the vacuum of powder onto the burn pit and the fire reignited. The employee received first and second degree burns to both legs.",1
"An employee was cleaning up foam debris on a boat when he fell 7 feet down to the floor of the boat dock, injuring his head and back.",1
An employee was picking up a saw when a coworker activated its power pack. The saw engaged and lacerated his right shin.,1
"An employee was unhooking acetylene cylinders. One cylinder was still under pressure and released gas that ignited, causing the cylinder to explode. The employee suffered burns to the back, left arm, right arm, and abdomen.",1
"On October 2, 2017, an employee was walking backwards and pulling a 994-pound cart of metal uprights when the cart tipped and the employee's legs were caught between the cart and the concrete walking surface resulting in a fractured left ankle, right tibia and right knee.",1
"An employee was using an industrial mixer to mix filler when he attempted to wipe the filler off the mixer. His right hand went into the opening and was struck by one of the mixer paddles, lacerating and fracturing it. The mixer was guarded at the time.",1
"An employee was placing a part in an upsetter machine when his right thumb was pinched between the backstop and the end of the backstop bolt, amputating his thumb tip.",0
"An employee was grabbing a pipe he was torch cutting when the pipe fell on his hand, amputating one of his fingertips.",0
"An employee and coworkers were attempting to change out a leaking O-ring. They were using a 3-ton come-a-long to create a gap when the hook on the come-a-long broke, causing the gap to close and smash the employee's right and left thumbs.",1
An employee was hooking a chain from a dump truck to a pickup truck when his left thumb was caught and amputated between the chain and hitch.,0
"An employee was using a separator to process a coil for final packaging when his right hand was caught between the separator and the coil, amputating his ring finger and lacerating his middle finger.",0
An employee was clearing a dust clog at a cyclone rotary valve when the valve amputated the three middle fingers of the employee's left hand.,0
An employee was carrying an extension ladder on his shoulder when he stepped in a hole and injured his back. He was hospitalized.,1
An employee was injured and hospitalized after a piece of scrap metal dropped on his toe.,1
An employee slid down a utility pole during training and suffered a broken leg.,1
An employee was pulling an order using a forklift and got his foot caught between the rack and forklift.,1
"An employee was attempting to remove two or three pallets from a stack of pallets when he slipped backward and fell onto the floor, fracturing his left hip. He was hospitalized.",1
"An employee working on the loading dock was trying to get the dock plate to line up with a truck trailer. The truck driver was moving the truck while the employee remained on the dock. The trailer moved back and the employee's head was caught and injured between the trailer and the building's wall. The truck driver saw the incident and moved the truck forward. The injured employee then fell off the dock and struck the ground, suffering head and arm lacerations.",1
"While operating an electric stand-up forklift to pick and assemble orders, an employee backed the forklift up and became pinned against a rack behind the forklift, suffering contusions to the upper back and shoulder.",1
An employee was mowing the greens when the mower rolled over the employee resulting in six broken ribs and bruised lungs.,1
An employee was cutting/ripping a 3-inch piece of wood on a table saw when the saw blade amputated his right index fingertip and his middle and pinky fingers to the second knuckle.,0
"An employee was entering the building to go to work, tripped over a floor mat and fell fracturing the femur.",1
"An employee was working from a walk board (placed on top of rafters), installing hangers for a sprinkler system inside a cooling tower. He was wearing a harness with a retractable lanyard at the time. As he was turning around to talk to his coworker, the walk board shifted and he fell about 6 to 8 feet, ultimately hanging by his harness about 40 feet above the base of the cooling tower. He was hospitalized with a laceration, soft tissue damage, and a blood clot to his left arm.",1
"An employee was cutting 3-inch tubing on a band saw when the employee's right thumb was pulled into the blade, amputating it.",0
An employee was sweeping the parking lot by the gas pumps when a customer punched him in the face multiple times. He was hospitalized with a broken jaw.,1
An employee was lowering a tailgate when his right middle finger was caught and amputated in the area where the tailgate hinged.,0
"An employee was moving a heavy umbrella box with six coworkers when one of the coworkers let go of the box. The weight then shifted toward the employee, injuring his back. He was hospitalized.",1
"An employee was using a rag to wipe down a machine when the motor grabbed the rag and pulled her right hand into the machine, amputating her pinky finger and breaking bones.",0
"An employee was moving a 500-pound metal pipe when it fell and struck the employee's hand, breaking it.",1
"An employee was changing a tire using a large hammer. When he struck the tire with the hammer, it bounced back and hit his eye and head.",1
"An employee was climbing off a roof onto a ladder when his foot slipped and he fell approximately 10 feet to the ground. He broke his right ankle and sprained his left ankle, requiring hospitalization.",1
"An employee locked/tagged out a rotary sieve machine and cleaned it. Afterward, the employee removed the lockout/tagout, then noticed there was still material in the machine. The employee started the machine to push the excess material out and was attempting to clean it again when the employee's right hand contacted the rotary sieve, amputating the index finger.",0
"An employee was attempting to remove a copper elbow that was jammed in an elbow machine. When the part was removed, the machine cycled and amputated two of the employee's right-hand fingers. The machine was unguarded at the time.",1
An employee was sanding down a shaft with sand paper when his left middle finger and index fingers became caught in the lathe. His fingers had to be surgically amputated.,0
An employee was operating a rebar bending machine when their fingers were caught in the machine resulting in amputation of the end of the index and middle fingers.,0
An employee opened the hatch to a rotary valve's dust collector and was attempting to inspect it when the valve partially amputated the employee's right index and middle fingers.,1
An employee was operating a shear when the bit came down and partially amputated one of the employee's fingers.,1
"An employee was changing the yarn on a flat bed knitting machine when his body hit the start-up bar, causing the carriage to quickly move and amputate his left thumb.",0
An employee was participating in horse patrol training when the horse bucked him off. He suffered two broken vertebrae in his lower back.,1
"An employee was tightening a loose hook bolt on a hops picker when her right hand was caught and pulled into the rotating hook, tearing ligaments and requiring surgery. The hops picker was unguarded at the time.",1
"An employee was cleaning a drill press when his right hand was caught on the drill bit, partially amputating his thumb.",0
"On October 3, 2017, at 8:25 p.m., an employee was stepping into the back of a semi trailer loaded with stock when he stepped in the gap between the semi trailer and the loading dock. He fell into the opening, broke his leg, and was hospitalized for surgery.",1
An employee was holding the lip of a dock plate open just before it was lowered into position on a shipping container when the employee's left hand became trapped between the lip of the dock plate and the rear floor of the shipping container. His middle and ring fingertips were amputated.,1
"An employee was holding a stethoscope and walking around a bed when the stethoscope cord got hung up on something, causing the employee to fall and suffer a broken right arm.",1
"An employee was attempting to lift laboratory equipment when it became unstable and fell on him, trapping him underneath. He fractured his ankle, leg, pelvis, and ribs on both sides.",1
"On October 3, 2017, at approximately 10:00 a.m., an employee was descending a ladder when his lanyard became tangled around his feet. He turned and jumped approximately 13 feet, fracturing both of his heels and requiring hospitalization.",1
"An employee fell 20 feet from a roof, breaking his lower back and ankle.",1
An employee was riding in the basket of a scissor lift that was rigged with a steel beam when the lift toppled over. The employee suffered four broken ribs and was hospitalized.,1
"An employee was waiting for a crane operator to unload an I-beam from a flatbed truck. His right hand was on the load. When the material reached the ground, his middle and ring fingertips were caught and amputated between two H piles.",1
An employee was taking a measurement and had one foot on a portable step ladder and one foot on a wall when he slipped and fell 9 feet over the wall. He broke six vertebrae.,1
"After preparing a stacker, an employee exited it and walked around to the operator side. His hand then contacted a moving shaft, which caught his left arm and pulled it back resulting in a broken forearm and an open wound.",1
"An employee was walking downhill with a product when he slipped and the product fell on him, breaking his right ankle. He was hospitalized.",1
"An employee was disassembling a crane when his right ring finger was smashed in a pinch point, requiring overnight hospitalization and surgery.",1
"An employee was using a table saw to rip-cut molding and severely lacerated the right middle finger, which was later amputated. The saw was unguarded at the time of the incident.",1
"An employee was using a gas-powered cut-off saw when it cut the employee's arm near the elbow, requiring overnight hospitalization.",1
"An employee was installing structural steel and moving to an existing pipe rack below his work area when he lost his balance and fell 4 feet, striking the pipe rack. He suffered a head laceration and a concussion, requiring overnight hospitalization.",1
A temporary employee was operating a standup PIT and struck a yellow safety pole catching his left leg between the pole and the PIT. His left foot was fractured.,1
An employee was operating a metal stamping press to manufacture a wheel-balancer when the employee's left hand became trapped and amputated in the press.,0
"On 10/04/2017, at 12:10 p.m., an employee slipped/fell on ice or water by an ice machine in a cafeteria, fracturing her left femur and requiring hospitalization and surgery.",1
An employee was holding a piece of wood to help another employee cut the wood with a circular saw when the sawblade amputated the employee's index finger and lacerated the middle and ring fingers.,1
An employee was cutting wood on a table saw when the sawblade amputated the employee's right ring and pinky fingers. The saw was unguarded at the time.,0
An employee was attempting to grab a pipe that was laying on a gate roller when the gate door rolled over and amputated his thumb.,0
"An employee was climbing an extension ladder that was on top of a drop cloth when the ladder slipped, causing him to fall to the hardwood floor. He fractured his right elbow and right hip.",1
"An employee was struck by a concrete mixing truck while walking at a construction site, suffering a lower leg injury.",1
"An employee was using a polishing machine to sand down a steel rod when his left hand was caught in the rotating sand paper, amputating his pinky finger at the knuckle.",1
"While performing diagnostics on a street light pole, an employee received an electrical shock and burns on both hands, the abdomen, and the shoulders.",1
An employee removed a six inch valve off the HF unit and received a second degree burn to the back of the neck.,1
An employee was walking on the job site and stepped on a rock which caused him to slip and fall resulting in a broken hip.,1
"An employee was positioning a hoist with rigging equipment to move a boom. As the employee was raising the hoist cable and hook, the hook was caught on the side lip of a work table. The hook then broke loose and swung, striking the employee in the face. The employee suffered a facial laceration, broken jaw, and tooth extraction.",1
An employee was trying to remove chicken guts from the chain of an eviscerator when the employee's left pinky fingertip was caught and amputated in the chain.,0
"An employee was changing out a standard chuck and installing a collet chuck on a small twin spindle lathe. While attempting to take off the first chuck, the employee stepped on the foot pedal, which actuates the hydraulic draw tube and separates the chuck from the face plate. He placed his fingers between the chuck and face plate and attempted to unthread the chuck from the draw tube. While he was unthreading the chuck, the lathe was activated via the foot pedal. The chuck then drew back toward the face plate, crushing his fingertips. His left middle, ring, and pinky fingertips were amputated.",0
An employee suffered a left thumb tip amputation.,0
"An employee was manually attaching a roll of media to a cardboard core on a rolling machine when another employee cycled the machine, causing the employee's right forearm to become pinned and fractured.",1
"While descending a ladder on a front-end loader, an employee missed the last step and fell 2 feet, breaking his left arm and receiving a small laceration above his left eye.",1
"An employee was attempting to clear a jam from a piece of demolition equipment used to recycle and process refuse concrete when his right arm entered the point of operation. His arm tendons and arteries were severed, requiring hospitalization.",1
An employee was using a chop saw to cut a 1 x 4 piece of wood. The employee held the plastic guard of the chop saw with his left hand and pulled the saw down with his right hand. He put pressure on the guard which resulted in the saw cutting the guard and lacerating his left hand.,1
An employee was operating a forklift when his right hand was caught and pinched between the forklift and a stationary skid of asphalt shingles.,1
"An employee's pant leg was caught by an auger and the employee suffered two broken legs, requiring hospitalization.",1
An employee was standing next to a crane truck when the crane truck touched an electric line and the employee received an electric shock.,1
"On October 4, 2017, at around 10 a.m., an employee was cutting a piece of drawer box using a table saw. She was pushing the material through the saw when her left index finger contacted the blade and was amputated. The saw was guarded at the time.",1
"An employee was helping to move an axle from one tripper line to another using a chain fall when the axle flipped and caught the employee's left hand between it and the rail, amputating the thumb.",0
"An employee loaded a pallet jack with meat from a freezer and was exiting the freezer when a second forklift attempted to enter. The two pieces of equipment collided in the freezer doorway, crushing and breaking the employee's right heel.",1
An employee was cutting meat with a band saw and amputated his fingertip just below the fingernail.,1
An employee had taken the trash out to the dumpster and was leaving the gated area when the gate came off its hinges and knocked her to the ground. The gate then fell on and broke her left ankle.,1
"An employee was using a router when his right index finger became caught in the router, amputating and fracturing his distal phalanx.",1
"An employee was walking across the roof of a shopping center to locate a leak when the roof and deck gave way. He fell about 15 feet to the ground on top of merchandise, breaking ribs and his C5 vertebra. He was hospitalized.",1
"On October 4, 2017, at approximately 11:59 p.m., an employee was operating a manual lathe. He was resurfacing a solid shaft with an emery cloth while turning it in the lathe when his glove, the cloth, and then his left hand wrapped around the turning shaft. He suffered four broken bones in his left hand and broke his wrist, requiring hospitalization and surgery.",1
"An employee was attempting to adjust forming bars on a paper bag machine when his arm was caught by the rubber rollers and pulled into the forming bars. He suffered a broken elbow and lacerations, requiring hospitalization.",1
"On October 4, 2017, at 3:00 p.m., an employee was using a tape measurer to measure a warehouse roof vent hole where the vent cover structure had been removed to place decking material. The tape measurer then fell onto the retrofitted drywall vent cover. The employee was trying to recover the tape measurer when the drywall collapsed and he fell 28 feet to the floor of the warehouse, fracturing his right hip, left foot, right cheek, and lumbar spine. He was hospitalized and had surgery.",1
"An employee slipped and fell while walking on concrete, suffering a head injury.",1
An employee was coming down a crank-up scaffold when he fell approximately 25 feet to the sandy ground below. He broke his upper back shoulder bone and some ribs.,1
"An employee was manually rotating a transfer drum when his hands and fingers contacted the cutting mechanism inside the drum. His right ring and middle fingers were amputated, and his left hand was lacerated.",0
An employee was attempting to remove a dough buildup from a line when the line amputated the employee's left ring and middle fingers to the first knuckle.,1
An employee was setting up a new punch press when the press cycled and amputated the left pinky finger at the middle knuckle.,0
"An employee was working near a crushing machine. A front-end loader was picking up a vehicle to be crushed when the vehicle fell off the forks. The employee was walking nearby and was struck by the falling vehicle, suffering a dislocated hip, lacerations, and broken ribs. The employee was hospitalized.",1
An employee was operating a powered industrial truck to load a trailer when his foot came off the pedal and was crushed between the truck and an adjacent rack system.,1
An employee was using a tube bender machine to bend a tube section when the employee's right pinky finger was caught and amputated between the tube section and bender head.,0
"An employee was working with a pallet recovery machine when he lost his footing and fell backward, hitting his head.",1
An employee was tying rope to a pole when a vehicle simultaneously pulled the other end of the rope. The employee's right index finger became entangled and amputated in the rope.,0
An employee was unloading a fertilizer trailer when he discovered a hydraulic leak. Hydraulic fluid was then injected into his hand.,1
"An employee was using a pneumatic rivet gun to insert rivets into pre-drilled holes when metal shavings/fragments were blown into the employee's right eye, requiring surgery.",1
"A temporary employee was operating a machine and holding a clicker to count/advance the machine when the employee dropped the clicker onto a shelf. As the employee reached to retrieve the clicker, the employee's left hand was caught in the machine, amputating the middle fingertip and fracturing the ring and middle fingers.",0
"An employee was vacuuming water out of a part when the part swung and struck his head, lacerating it.",1
An employee lost consciousness and suffered a fractured skull at a multi-story apartment building construction site.,1
"An employee was on the second floor of a building, making and lifting up new walls from the ground, when he slipped and fell 22 feet to the ground. He fractured his left arm and face.",1
"An employee was pushing a board through a table saw when the blade caught his glove, pulling his left hand into the saw. His index, middle, and ring fingers were amputated.",1
"An employee was in the process of performing a plate change on a printing press when a locking strut failed, causing a color head to drop. The color head struck the employee's right-hand third digit, causing a distal phalanx fracture and fingertip amputation.",0
"An employee was moving paint from one storage area to another. He opened the door to the storage area and placed his right hand on the door for support while he bent down to pick up a bucket of paint. His right hand began to slip, causing the door to shut and trap his right ring finger between the door jam and hinge. His distal phalanx was amputated.",0
"An employee was helping to unstring a drill line when the drill line became hung up in the fast line. The drill line then came free, striking and lacerating the employee's right thigh.",1
"On 10/05/2017, an employee was attempting to open the hatch of a sugar beam/tank while using an 18-inch pipe wrench for leverage when he broke his leg, requiring hospitalization.",1
"On October 5, 2017, a temporary employee was burned on the right forearm while attempting to light a torch, requiring hospitalization.",1
"An employee was using a transfer hose to clean an area with hot water when the hose failed and sprayed the employee, burning the lower torso and thigh.",1
"An employee was climbing a tree to trim the branches when he slipped and fell approximately 15 feet to the ground, fracturing his L1 vertebra and requiring hospitalization.",1
An employee's foot slipped out while he was stepping approximately 2 feet down onto a work platform to access a conveyor's grease point. He fractured his left lower leg and was hospitalized.,1
"An employee was loading a pallet into a truck when he slipped and tore his left patella tendon, requiring hospitalization.",1
"An employee lost her balance and fell to the floor, injuring her pelvis.",1
An employee was leaning sheet metal against his body when he fell and the sheet metal fell on top of him breaking his foot.,1
"An employee was guiding an underground concrete pipe in a trench when the pipe fell off its cable and hit his right leg, breaking it.",1
"On October 5, 2017, at approximately 9:00 a.m., three employees were working together to remove vinyl siding from the side walls of a residential balcony for demolition. They were working from extension ladders with hand tools. The injured employee entered the balcony from the extension ladder to look for a potential anchor location for his personal fall arrest system. When he entered the balcony, it collapsed beneath him. He landed on the ground and broke his leg.",1
"On October 5, 2017, an employee was sprayed with chemicals while unhooking a hose from a chemical tank. The employee was hospitalized with chemical burns to the face and eyes.",1
"While working in an electrical cabinet, an employee contacted the energized side of the cabinet, suffering electrical burns to both hands, the right side of the face, the right ear, and part of the nose.",1
"An employee was operating a forklift truck when he extended himself out of the right side of the forklift cab and inadvertently activated the boom-down lever. The boom came down and struck him, fracturing three ribs and his rib cage.",1
An employee was cutting kale when his knife slipped and partially amputated his left thumb tip.,1
"An employee was removing a jam from a labeler machine when his glove and right middle finger were caught in the machine, resulting in an amputation to his finger. The machine was energized at the time.",0
An employee was trying to climb into the cab while the truck was moving. The employee fell and was run over by the back wheel resulting in a broken ankle and foot.,1
"An employee was walking into the lobby, slipped and fell, breaking her elbow. She was admitted to the hospital for surgery.",1
"An employee was moving a mainframe containing multiple drivers off a pallet. When the employee moved the mainframe off the pallet, it tilted. The employee tried to stop the mainframe from falling but it fell and hit the employee's right leg, breaking it. The employee was hospitalized.",1
An employee was feeding wire into a drawing machine when the wire caught the employee's right hand and pulled their fingers into the block. The employee's right index finger was partially amputated.,0
An employee was attempting to retrieve a gasket that fell inside a pump housing when the pump amputated his left middle and ring fingers.,0
"On October 6, 2017, an employee was cleaning a rotary printing press when his left index finger was caught and amputated between the press rollers.",0
"An employee was pulling wire using a pulley when the pulley gave way and fell 10 feet, striking the top of the employee's head. He was hospitalized.",1
An employee was cutting a piece of wood using a radial arm saw and amputated his right index finger. The saw was unguarded at the time.,0
An employee was operating a walkie rider device when she lost her footing and smashed her foot between a column and the device. It clamped down on her foot and lacerated her toes.,1
"An employee was placing belts on a pump jack when his right pinky finger was caught under the pump jack's belt, amputating the fingertip.",1
An employee was cleaning the rollers of a machine when both hands were pulled into the ingoing nip point and amputated.,0
An employee was greasing a conveyor belt when his right index finger became stuck and amputated in the belt.,1
"An employee was using a hand tool to retrieve parts from a candy press machine when the employee's hand tool and left hand were pulled into the point of operation, amputating the index finger.",0
"An employee fell while installing safety clamps. During the fall, the employee's left pinky finger was caught and partially amputated between a safety clamp and a pipe.",1
"An employee was placing products on a bottom rack and grabbing his calculator from the top of a box when he blacked out and lacerated his forehead, requiring stitches and hospitalization.",1
"On 10/5/2017, at approximately 11:58 a.m., an employee was operating construction equipment when it flipped and threw the employee 100 feet from the cab. The employee suffered brain and arm injuries, requiring hospitalization.",1
"An employee was moving shipping crates on a truck bed when he fell off the truck bed and struck the ground, fracturing his ribs, wrists, pelvis, and tailbone and puncturing his lung. He was hospitalized.",1
An employee suffered heat stress and body cramping after finishing his work shift.,1
"An employee was on the lift gate of a tractor trailer truck, closing the pull-down door, when his right pinky fingertip was caught and amputated (with bone loss) between the roller and the door's track.",0
"On 10/06/2017, an employee was in the parking lot retrieving shopping carts when he tripped over some rebar that was sticking out of a bundle on the side of the building. He fractured his right hip and was hospitalized.",1
"An employee was pushing a rack of product from one location to another when the trolley of the rack fell off the rail, crushing the employee's big toe and requiring surgery.",1
"An employee was on a haul truck trailer helping a mechanic tighten bolts. When they were finished and coming off of the trailer, the employee slipped on mud and fell to the ground, breaking an arm.",1
"A temporary employee used a free-standing crane to lift a leveler's lip plate and was inspecting the welds underneath it when the hook slipped off the lip plate, causing the leveler to fall and strike his head.",1
"An employee was standing on a stationary golf cart to empty a trash can into a dumpster when he fell about 2 feet to the asphalt ground, fracturing his hip and requiring hospitalization.",1
"On 10/06/2017, an employee's left hand was struck by a coworker's forming hammer, amputating his middle fingertip.",0
"An employee was cleaning wet corn out of a probe used to check grain that is brought in by truck. The employee's left thumb was in the middle gate when the control room closed the gate, amputating his thumb at the middle knuckle.",1
"An employee had just washed his vehicle and was walking back to the cab when he slipped on an object and fell to the ground, fracturing his left tibia.",1
"On October 6, 2017, at approximately 11:30 p.m., an employee slipped on water and fell to the ground while assisting a surgical procedure, fracturing the left elbow and requiring hospitalization.",1
"An employee was using two hydraulic jacks on each side of a 36-inch pipe to create a drainage beneath the highway. The unit was under pressure when a 3-inch fragment of the jack separated and penetrated the employee's hard hat, fracturing the skull.",1
"An employee was clearing a board jam from a conveyor when the conveyor activated. The conveyor roll then struck him, fracturing one of his ribs, his pelvis, and the L1 and L3 vertebrae. He also suffered one cracked rib and body bruising.",1
"An employee suffered a hernia while lifting a desk, requiring hospitalization and surgery.",1
"An employee was moving a roll of material with a pallet jack when the material fell and struck his leg, causing possible vascular injuries.",1
"An employee was attempting to adjust a machine that peels plastic off of bottles when the machine's striker plate pulled his glove in and then crushed his right pinky fingertip, amputating it.",0
"An employee was using a lighter to light a propane steam table burner when the lighter ignited propane gas that had accumulated in the steam table due to a valve that had been left open earlier. The employee suffered burns to the face, neck, right arm, and right hand.",1
"An employee was walking down an aisle when she tripped, fell, and injured her knee, suffering a contusion.",1
"An employee was operating a digger near a 14-foot hole to replace a steel concrete pole. He was exiting the back of the machine using the ladder when he fell into the hole, fracturing his L2 lumbar vertebra and requiring hospitalization.",1
"An employee was lowered into a peanut elevator to unclog the choke. Afterward, he was being pulled out of the elevator when his harness rope broke (cut on metal edge), causing him to fall approximately 10 feet. He injured his ankle.",1
"An employee was standing next to a semi-truck and trailer when the employee's clothing became caught in the trailer. The truck pulled away, and the employee was crushed between the trailer and the ground, and then between the trailer and a guardrail. The employee suffered a broken tibia and fibula.",1
"An employee's left hand was caught in a print machine's rollers, amputating the index and middle fingertips.",0
An employee was fixing a switch on a rail line. The switch is near the main chain that pulls hog carcasses through the conveyor. The employee's glove was caught in the chain and the employee's left finger was amputated.,1
"An employee was operating an electric powered industrial truck (PIT) when his right leg was pinned between the PIT and a handrail, fracturing his right tibia and fibula.",1
An employee was adjusting the die in a press when the press amputated two of the employee's fingers.,0
"On 10/07/2017, an employee received first degree arc flash burns to his face, requiring hospitalization.",1
"On October 7, 2017, an employee was clearing a jam from a hopper when the slide gate of a hopper closed on the employee's hand, amputating it.",0
"An employee was helping another employee with a plate. The other employee hit the plate with a hammer, and the plate fell off its clamps and struck the first employee's left hand, breaking one finger.",1
"Two employees were counting the safe at the end of a shift. One employee was bracing her hand against the open safe when the other employee closed the safe on her left ring finger, fracturing it.",1
"An employee was pulling a truck out of a muddy field with a tractor when a chain slipped off the truck and struck the employee's head, causing a concussion and left ear laceration.",1
"An employee was cleaning reactor stud holes using a hand-held drill with a wire brush attachment when the drill locked up in the hole. As he was reversing the drill, his gloved hand became wrapped around the brush attachment, lacerating and dislocating his left middle finger.",1
"An employee was acting as a spotter on the road when he injured his foot, requiring hospitalization.",1
"An employee was pulling on rope to cut a limb out of a tree when his foot became tangled in the rope. He lost his balance and fell, striking the side of a truck and fracturing his face.",1
Employees were moving pallets to a different trailer when one employee was struck by the pallet as they were opening the trailer door. The employee suffered an injury to the right shin below the knee.,1
"An employee was walking into work and tripped on the support bracket of the flood guard at the entry to the building. The employee lost balance and fell forward onto the ground resulting in a fractured arm, contusions to both knees and an abrasion to the bridge of the nose.",1
An employee slipped and fell approximately 4 feet while he was descending the four-rung fixed ladder of a tractor trailer. He broke his leg and ankle and was hospitalized.,1
"An employee tripped and fell to the floor while walking down the hallway, fracturing her left femur.",1
"An employee was shot in the arm, buttocks, and abdomen while making a delivery, requiring hospitalization.",1
An employee was removing a piece of dough from a machine when the employee's right index finger was caught and amputated between the machine's blade and conveyor belt.,0
"An employee's personal gun discharged into his left hand, injuring his index finger, which had to be surgically amputated.",1
"An employee was stepping onto a fork truck platform to retrieve equipment when he fell 22 feet to the ground, fracturing his orbital bone an suffering a concussion.",1
"An employee was working a bag machine when bags began falling into the machine and into the gears. While attempting to remove the bags, the employee's left index finger became jammed and amputated in a gear.",0
An employee was trying to remove a stuck valve when the valve feeding apparatus broke and either the feeding machine mechanism or a chain broke and amputated the distal end of the employee's left ring finger.,0
"An employee was removing tin from the roof of a residential structure when he slipped and fell, grabbed the edge of the roof, lost his grip, and then fell 12 feet to the ground below. He struck the back of his head on a wall when making contact with the ground, requiring hospitalization.",1
"An employee was making adjustments to a prototype machine when his glove was caught in the rollers, pulling his right hand into the roller mechanism and amputating four fingers.",0
An employee was operating a telehandler on a county road and moved to the shoulder to avoid oncoming traffic. The shoulder gave out and the telehandler tipped on its side into the ditch. The employee sustained two broken ribs and was hospitalized.,1
"A golf cart that was lifted on a hydraulic jack stand slipped and fell onto an employee while he was working underneath it, fracturing his left leg.",1
"An employee was cutting a piece of plywood with a ""skew"" saw when it kicked back and cut his right thigh. He was hospitalized and had surgery.",1
"On 10/09/2017, at 2:30 p.m., and employee was struck by a palletized load on a pallet jack, requiring hospitalization.",1
"An employee was lifting a steel joist with two coworkers when the coworkers on the other end of the joist let their end go. The employee's right index finger was smashed under the joist, amputating it halfway below the nail.",0
"During rig-down operations, an employee's left hand was caught between a hydraulic torque wrench and a flange, amputating his thumb from the mid-knuckle to the tip.",0
"An employee was leaving a room when she tripped on a chair and fell to her knees, fracturing her left kneecap and requiring hospitalization.",1
"An employee suffered a knee fracture, while working in a game as a professional football player.",1
"An employee was standing on hay approximately 7 feet high to load bales one by one onto a flatbed pickup truck. The employee slipped on a wet bale and fell off the haystack, suffering a head injury, a broken collarbone, and broken ribs.",1
An employee was attempting to clear slugs from a C-press with a piece of steel when the steel came out of the press and struck the employee's face. The employee suffered a facial laceration and hairline fractures to the jaw.,1
"While handing cases of milk from the dock to a coworker standing inside a truck, an employee slipped on the dock and fell, breaking three ribs and requiring hospitalization.",1
"An employee tripped while removing a peg line and rolled the left ankle, breaking it.",1
"An employee was drilling a hanger in an overhead utility chase while on an 8-foot ladder. While he was descending the ladder, it kicked out, and he fell to the concrete floor, landing on his right hip and breaking his right femur. He was hospitalized and had surgery.",1
"An employee was operating a blender machine. As she pushed an onion through the processor, her right middle finger was amputated.",0
Two employees were lifting a moisture sensor onto a platform when one employee caught a finger between the sensor and the platform resulting in amputation of the right ring finger at the first knuckle.,0
"An employee was turning a ball valve to allow sulfuric acid to gravity feed when the gasket in the ball valve failed and released acid. The acid contacted the employee, who suffered chemical burns.",1
An employee was stacking wood about 28 feet from a rip saw when a piece of wood was thrown from the rip saw and struck the employee in the back. The wood impaled his back and went through his stomach.,1
An employee was cleaning a machine when the chain and sprocket amputated one of the employee's fingers.,1
An employee dismounted a stack of lumber that was approximately 40 inches high and fractured his heel.,1
"On 10/09/2017, an employee fell from a moving golf cart that made a sudden left turn and suffered a head injury, requiring hospitalization.",1
"An employee was working from a 6-foot ladder when she fell and broke her right arm, requiring hospitalization.",1
"An employee had put his truck in park, exited it, and was walking toward a house when he noticed the truck starting to roll toward the house. He ran between the house and the truck to keep the truck from rolling into the house, suffering a broken pelvis.",1
An employee was operating a press brake and caught their fingers in the tool.,0
"An employee was maneuvering an electric pallet jack through a tight area when he lost his balance and stepped off the jack. At that moment, his right leg was caught between the pallet jack and the crash protector, cutting his calf and requiring hospitalization.",1
"An employee was getting an oil sample from a hoist on the rig floor. He turned a valve and the hoist activated, amputating his right index fingertip.",0
"An employee was attempting to stop a bus passenger from falling when he lost his balance and fell with the passenger against the bus, pulling his hamstring.",1
"An employee was removing debris from a drill press when his glove and right hand were caught by the press, amputating three fingers. The drill press was unguarded and running at the time.",1
An employee was removing a piece of corn from a conveyor belt when the employee's right arm was caught and amputated in the belt.,0
"An employee was preparing to cut a piece of plywood with a radial arm saw when the employee's left hand contacted the blade, amputating approximately one half of the middle finger.",0
An employee was trying to dislodge a piece of plywood when the plywood pinched and lacerated the employee's right middle finger.,1
"On October 9, 2017, at approximately 10:00 a.m., a traveling crew was working on a new natural gas pipeline installation. The crew was forcefully inserting a plunger (under mechanical pressure from an excavator) into the pipeline for standard pipe cleaning when its apparatus became disconnected from the excavator and flew out, striking the injured employee in the head/face. He lost consciousness and suffered a concussion, multiple contusions, multiple abrasions, and fractures to the nose and nasal cavity. He was hospitalized.",1
An employee was using a table saw to cut wood when the saw kicked back and amputated the employee's left pinky finger.,0
An employee was attempting to clean the head of a router machine when the blade amputated his left index finger and broke his left middle and ring fingers. The machine was running at the time.,0
"An employee was lowering a cab onto a dump truck using an overhead crane when he lost his footing and accidentally hit a button on the overhead crane, causing the crane to hoist the cab with his finger stuck in it. His finger broke.",1
An employee was cleaning out a fiber filler machine when the machine's metal plate amputated the employee's left index finger. The machine was not locked/tagged out at the time.,1
"An employee was kneeling on the ground putting bolts on a rafter while a second metal rafter was leaning on a secured larger rafter section. A gust of wind blew the leaning metal rafter onto the employee, pinning him between the rafter on the ground and the rafter that fell on top of him. He suffered a facial laceration, broken foot, and broken cheek bones.",1
"An employee became sick and dizzy while using a backpack leaf blower, requiring hospitalization for dehydration.",1
"An employee tripped over a tree stump and fell to the ground, hurting his knee.",1
An employee was operating an electric pallet jack when his hand was smashed between the pallet jack and a metal broom hook that was mounted on an adjacent steel column. He suffered severe hand lacerations and broken bones below his knuckles.,1
An employee was removing stuck dough from a mixer when the mixer blade amputated part of her thumb. The mixer was running at the time.,1
An employee was using a band saw to cut short ribs when his left thumb contacted the blade and was cut. His thumb had to be amputated.,1
An employee was helping two other employees untwist metal strands from a pack when a strand quickly pulled back into the twisted position and amputated the employee's right index fingertip.,0
"An employee was shocked and fell from a ladder while changing out the ballast of a light fixture, suffering electrical burns and bumps/bruises from the fall.",1
A maintenance employee was reaching into a machine to straighten a cable when the machine activated and caused an amputation.,1
"Two employees were moving a 500-pound valve set from a rack when the valve set slid off the rack and struck one of the employee's left foot, fracturing it.",1
"An employee was troubleshooting the cleaning process on a malfunctioning tank. When he attempted to correct the flow of chemicals, the chemicals sprayed him and ran down his apron, contacting and burning his foot. Foot protection was not worn at the time.",1
An employee was loading a plastic fill bag onto a bagger holder when his finger was smashed between a bar on the fill and the bagger holder. He was hospitalized.,1
"An employee fell to the ground while opening a storage trailer door for another employee, fracturing the left hip.",1
"An employee was pinned between two tractors while transporting them, suffering broken ribs and a possible broken shoulder. The employee was hospitalized.",1
"On 10/10/2017, at 5:30 AM, an employee was running to apprehend a patient when he fell and fractured his right knee, requiring hospitalization and surgery.",1
"An employee was cleaning a drum roller and material belt when his hand was caught between the belt and drum roller, which then pulled his arm into the belt and roller. He suffered a broken wrist; three broken ribs; burns to the forearm, palm, and fingers; and skin removal from the forearm, palm and fingers.",1
An employee was picking up 5- to 10-pound recycling bins when he started feeling lightheaded and having leg cramps. He was hospitalized due to dehydration.,1
"During very hot conditions, an employee who had been operating a forklift appeared disoriented when he dismounted the forklift. He then passed out, striking his head on the floor, due to heat stress.",1
"An employee was attempting to cut a 6"" diameter core on a chop saw when his right upper arm contacted the saw blade and was severely lacerated.",1
"An employee fell approximately 7 feet from warehouse storage shelves and broke his left ankle, requiring hospitalization.",1
"An employee was using a crane to move loads of pipe from the shop floor onto the shelving system in the warehouse. He noticed that one of the pipes in the load was stuck on the lip of the warehouse shelf. He climbed a step ladder and attempted to unhinge the pipe using a crowbar. When he used the crowbar, the load began to shift on the shelf and he jumped from the ladder to avoid it, landing on his left leg on the concrete shop floor. He fractured his left knee and tibia and was hospitalized.",1
An employee was completing the hands-on portion of stand-up forklift training when he drove into a wall. His left hand was crushed between the forklift and the wall.,1
"An employee was moving an air compressor when it fell on and broke the employee's foot, requiring hospitalization.",1
"An employee was cleaning near an orbit valve that had a new actuator. The actuator showed that the valve was open when it was actually closed, causing a release that broke the employee's left leg. He was hospitalized and had surgery.",1
An employee was troubleshooting the chute of a ready mix concrete truck when the chute mechanism pinched his finger resulting in an amputation.,0
"An employee was inside a scissor lift bucket when the scissor lift hit a powerline, causing the live wire to break, fall to the bucket, and ignite the lift. The flames traveled to the lift arm, causing the bucket to give way. When the bucket gave way, it crashed into a pole that was live, causing an explosion that ignited the employee's clothing and propelled the employee out of the bucket. The employee suffered burns.",1
An employee was working in the tool room and was involved in a physical altercation with another employee resulting in a head injury.,1
"An employee slipped and fell from his rig to the ground, fracturing his right clavicle. He was hospitalized.",1
"An employee was struck by a bus while directing traffic, fracturing the left leg and collarbone and requiring hospitalization.",1
An employee was installing a gasket between flanges that were held apart with wedges. One of the wedges slipped out and the flanges came together smashing the employee's index finger resulting in partial amputation of the distal soft tissue.,0
"On 10/10/2017, at 5:00 p.m., an employee was bitten by a snake while sorting through stakes, requiring hospitalization.",1
An employee was loading a mower onto a trailer when the mower fell off the trailer and rolled on top of the employee. The employee suffered broken ribs.,1
"An employee was attempting to determine if a packing machine's heat plate was warm when the employee's right hand was crushed between seal plates, amputating the ring fingertip. The machine was not locked out at the time of the incident.",0
"The injured employee was holding a metal part on a brake press while another employee operated the press. As the press operator hit the brake press pedal, the injured employee's right hand slipped off the metal and was smashed and fractured between the metal part and the press die.",1
"An employee went to a residential house to provide assistance for a consumer. As she went to turn on the light, she tripped on the corner of a shoe that was laying in the floor. She tried to catch herself when she fell, breaking several bones in her left wrist and radial bone.",1
"An employee slipped and fell while exiting his truck, injuring his third and fourth neck vertebrae.",1
"Two employees were rigging up while a third employee was using a truck to light the worksite with headlights. When the third employee exited the truck to help them, the truck rolled down and pinned the two employees. One employee was hospitalized with a cracked pelvis.",1
"An employee was rolling a trolley away from a coating press. As he was attempting to wheel the trolley between raw material rolls that were on the floor and a cart holding a cylinder, his right pinky finger was smashed between the corner of the trolley and the end of the cylinder. His fingertip was amputated down to the first knuckle.",0
An employee was attempting to light a stove's pilot light when the stove lid came down and amputated the employee's middle fingertip.,1
"An employee was operating a stand-up forklift. As he was turning, the product on his pallet began to fall. He adjusted the lift and lost control of it, hitting a rack. During the collision, his left foot was caught between the forklift and the rack, suffering bleeding, severe swelling, and a fracture.",1
"An employee was operating a forklift when he ran into a board that was sticking out into the passageway, breaking his femur.",1
An employee as using compressed air to blow water from a urinal's water line when the pressure caused the urinal to break. A piece of broken porcelain then lacerated his right elbow.,1
An employee was climbing down a ladder with a tool bag swung over his shoulder when it swung and struck him. He suffered an infection and was hospitalized.,1
An employee was attempting to clear a jam from a press machine when the press came down and amputated part of the employee's right hand.,0
"An employee was wheeling a tool cart from one job location to another when a stack of sheetrock that was leaning vertically against the wall toppled over and landed on the employee, fracturing his right wrist and seven right-side ribs.",1
"At a construction site, an employee fell from a ladder broke his pelvis.",1
An employee was attempting to adjust or repair the conveyor belt on equipment when the employee's right index fingertip was caught and amputated between the belt and roller.,0
"An employee was installing peel and stick underlay material on a roof when his foot became tangled in the material and he fell 12 to 15 feet, breaking his ribs.",1
"An employee was attempting to steady a carton on a pallet that was on a forklift when the employee's fingers were lacerated, resulting in the partial amputation of two fingertips.",1
"On October 16, 2017, an employee was moving a patient and entering an elevator when the door began to close. He stuck his elbow in the doors to keep them from closing and the door scratched his arm. The scratch became infected, requiring hospitalization.",1
"On October 10, 2017, an employee was inspecting a roof for evidence of vermin when the roof collapsed. He fell to the next floor down, fracturing his wrist and requiring hospitalization.",1
"An employee was making a service call and was physically assaulted by a number of individuals resulting in a concussion, a broken nose, an ocular injury, bruises and abrasions.",1
"An employee was making a delivery when the employee slipped off the back of the delivery truck. The employee's head struck the asphalt pavement below. The employee lost consciousness and suffered a concussion, requiring hospitalization.",1
"An employee was helping to load a beam onto a truck. He was trying to take a wood block out from under the beam when it fell from the forks of a forklift and caught his right index finger, amputating it between the first and second knuckles.",1
Two employees were filling cylinders when a flash fire occurred. They suffered first and second degree burns. One employee was hospitalized.,1
An employee was working on a closed loop process machine when his right index fingertip was caught and amputated between a broken plug and the meat form when the machine cycled.,0
"A tree limb was cut and dropped to the ground. When it hit the ground, it shattered. Tree limb debris struck a nearby employee, who suffered a broken fibula and tibia and was hospitalized.",1
"An employee was operating a rewind machine when his arm contacted the moving roll and was drawn into the machine, fracturing his lower right arm.",1
An employee was harvesting grass when his hand was caught between a conveyor and roller. He broke a finger and was hospitalized.,1
An employee was laying sod and spreading grass seed at the construction site. He complained of chest pains and numbness in his arm. The employee was hospitalized.,1
"While working and walking on a flat roof, an employee fell through a skylight and metal decking that were being removed. The employee fell approximately 11 feet onto grocery carts below, requiring hospitalization for multiple fractures. Fall protection was not used at the time.",1
"An employee was standing next to his truck in a work zone when he was struck by a drunk driver, suffering multiple head, neck, and back injuries.",1
"An employee was operating a metal folding machine when the machine closed on her hands, amputating both thumb tips.",0
"An employee was cleaning product lines and a pump when his left hand contacted the pump's rotating parts, amputating his left index fingertip. The pump was energized at the time.",0
"An employee was trying to evade bees when he tripped and fell, breaking his right leg.",1
An employee was cleaning a spray gun. He had mineral spirits in the gun and was adjusting the spray tip when the gun shot the mineral spirits into the skin on one of his fingers. The finger was surgically removed and the employee was hospitalized.,1
An employee fell 18-20 feet through an uncovered hole in the roof while helping to install HVAC equipment. The employee was hospitalized for a facial fracture.,1
"An employee was pushing a cart while wearing clean room gear. Her footwear became caught in the wheel, causing her to fall and break her right hip.",1
"An employee was rigging down an isolation tool on a crane truck when he slipped on wireline grease that was on the bed of the mobile crane truck and fell to the ground, fracturing his left wrist, right elbow, and right shoulder.",1
"An employee was supervising as two coworkers removed a plow from an overhead conveyor line. The plow was suspended from the conveyor by two j-hooks and two s-hooks. The coworkers were using a forklift to lower the plow to the ground. As the plow was being raised by the forklift, one of the coworkers guided it so that the mouth of the plow rested on the tines. The tines on the lift were wet due to rainy weather conditions, causing the plow to slide toward the end of the tines and fall off the forklift onto the ground. During its descent, the plow struck the employee on the right side of his body and sent him backwards into a hook rack, fracturing his ribs, shoulder blade, and T-12 vertebra.",1
"An employee was recoupling bundles of aluminum in a vessel. When he placed a steel band around the bundle, the bundle fell over and pinned his right leg against a second bundle.",1
"An employee was closing the door to an open safe when her right thumb was caught between the door and the frame, crushing the bone and amputating the tip of the thumb.",0
"An employee was attempting to open a large warehouse door when he pulled a groin muscle, requiring hospitalization and surgery.",1
An employee's left hand was lacerated by a chop saw while cutting scrap metal.,1
"An employee was carrying a 50-pound case of potatoes on her shoulder when she fell and struck her head on the floor, losing consciousness.",1
An employee was cutting bellies using a boneless blade when the blade amputated the employee's left ring fingertip.,0
"An employee was raised on a forklift into a dumpster to press down the trash inside. Upon exiting the dumpster, he fell to the ground and fractured his ankle.",1
"On October 11, 2017, an employee was feeding cardboard into the feed roller of a machine when his right hand became caught in the ingoing nip point of the roller. He received third degree thermal burns to the right hand and fractured three fingers.",1
An employee was using a table saw to cut foam strips when the rotating blade amputated his left thumb tip.,0
An employee was helping a second employee unload pipe when a piece of pipe became stuck. The employee was pushing on the pipe when it gave way and crushed his left index fingertip.,1
"An employee was operating a tar truck on the highway and noticed a problem with the equipment. He exited the cab of the vehicle and noticed a large amount of hot tar coming from the valve of the equipment. He slipped on the tar and fell to the ground, contacting the 240-degree tar. He received burns on his hands and back.",1
An employee was cutting pork with a band saw when his left middle fingertip contacted the blade and was amputated.,0
"On October 11, 2017, at approximately 9:10 PM, an employee was operating a press brake (equipped with laser guard) to bend a metal part when his right index fingertip was pinched and amputated between the part and the machine.",0
"An employee was working from a 20-foot scaffold and cleaning a pipe system when the hook of a come-a-long tool that was holding the pipe hit the upper side of his right leg, cutting the soft tissue. He was hospitalized.",1
"An employee was helping a machine operator with a changeover on a side frame welder, which forms a J- or U-shaped wire and welds it onto two other wires. The wire was caught in a groove, and the machine was turned off to fix the wire. The employee's left middle finger was caught in a leg wire and pushed up into a support bracket, amputating it close to the base of his fingernail. His left index finger was lacerated.",0
"An employee was on the second floor of a job site, which had a safety rail system around the perimeter. He was bending over to pick up a piece of wire mesh when he lost his balance and grabbed for the safety rail. One of the uprights then detached, allowing him to fall to the first floor (concrete). He broke his right leg.",1
"An employee's glove and left hand became caught in a rotary hammer, amputating a finger.",0
"As an employee was stepping up on the cab area of a crane, the slide door of the cab slightly came off its track, causing him to lose his balance and fall. He fractured his right tibia and fibula.",1
"An employee was standing on a counter to get cigarettes from an overhead rack when she fell to the floor, breaking her right tibia.",1
An employee suffered a fingertip amputation while cutting a piece of sheet metal with a metal working machine.,1
"After hand loading 7 bags of pelletized horse bedding into the bed of a customer's pickup truck, an employee fell as she was getting down from the bed of the truck. She fractured her left femur, radius, and ulna.",1
"An employee was working on 46-inch high stilts inside a building. The floor was slippery and dirty, and the employee slipped and fell. He injured his right hip and was hospitalized.",1
"An employee was bending down and cleaning out a box when a piece of angle iron fell on his left ring finger, amputating the fingertip.",1
"An employee was preparing to flush water through heat exchanger equipment when he was severely burned by hot water (about 280 degrees), suffering burns on his chest, left arm, and shoulder.",1
An employee was cutting fabric with an electric knife when his left hand slipped and struck the moving knife blade. He suffered a soft skin amputation to the left middle finger.,0
An employee suffered a fingertip amputation while loading a carrier plate.,1
An employee suffered a right index fingertip amputation while cutting pork chops with a blade.,0
An employee was trying to dispose of a wood pallet in a dumpster when his right index fingertip was caught and amputated between the wood pallet and the edge of the dumpster.,1
"An employee was checking the status of a machine when his left hand entered the airlock, amputating three fingertips.",1
"An employee was loading structural steel onto a truck using an overhead crane when the employee's hand was caught between two pieces of steel, partially amputated the index finger.",0
An employee was monitoring and collecting mussels in a river when she became low on oxygen and lost consciousness underwater. She was hospitalized.,1
"An employee went to the elevator to help other employees with a combative patient. She was kicked by the patient, knocking her to the floor and breaking her right radius and right hip.",1
"During loading operations, an employee's right hand was caught between a twist lock on a container and the flatbed of a truck, lacerating the skin between his thumb and index finger and crushing his middle finger. He was hospitalized.",1
"An employee was positioning a piece on a mechanical power press when the press was activated via the foot control. The part then shifted and the employee's fingers were caught in the press, amputating the middle fingertip.",0
"An employee was removing hot tar from a hot pipe and placing it in a lugger when the wire broke, causing the lugger to fall on the employee. He received burns to the left side of his face, his left arm, and the back of his neck.",1
An employee was operating a powered industrial pallet jack when the employee's foot came off the platform and was crushed between the vehicle and a guard rail.,1
An employee was paving forms for sidewalks when his small left finger was smashed and fractured by a piston on a material loader.,1
An employee was reaching to grab a roll of plastic cover that the wind was blowing away when the employee's finger was smashed between the roll and the mandrel.,1
"An employee exited a pallet jack and was crossing an aisle when his foot was run over by a passing forklift, breaking his toes and damaging ligaments.",1
"An employee's right foot was pinched between a steel cage (protective barrier) and equipment being moved by a crane, partially amputating his second toe.",1
An employee was vacuuming the inside of a containment onboard a ship when he experienced stomach and leg cramping. He was hospitalized for severe dehydration.,1
"An employee was removing a coil from a turnstile using a crane. His hand was on the C-hook of the crane when the C-hook moved backwards into a rack, crushing three of his left-hand fingers between the hook and the rack.",1
"An employee just finished hand sanding a lugnut/lock, turned off the belt sander, and was returning to his normal work area when his right ankle gave way and he fell to the ground. He fractured his ankle and lower leg. The floor area adjacent to the belt sander was uneven due to previous equipment mounting.",1
An employee was using a box cutter to open a box when the cutter slipped and amputated the employee's left index fingertip.,0
"While stepping across a raised dock board to a trailer, an employee tripped on the dock board and fell between the truck trailer and dock board. The employee suffered a laceration to the left leg, requiring surgery and hospitalization.",1
"An employee was operating a CNC lathe and using a wrench to tighten the lathe chuck when the wrench hit his left hand, partially amputating his thumb and his second and third fingers.",0
An employee was working at a lower level when another employee at a higher level dropped a drift pin that hit and lacerated the employee's leg.,1
"On October 12, 2017, an employee tripped and fell to the ground on the same level, suffering a laceration above her eye that required hospitalization.",1
"An employee fell while walking down vestibule steps, suffering pain in the lower right leg and requiring hospitalization.",1
An employee was working at a height of approximately 14 feet when he detached his fall protection system to move from one spot to another and fell to the lower level. He punctured a lung and broke two ribs and his right ankle. He was hospitalized.,1
"A maintenance employee was attempting to repair the cable and spool on a parts moving rack when the rack shifted, causing it to fall and tighten the cable around the spool. The employee's left middle and index fingers were caught between the cable and spool, suffering lacerations and compound fractures.",1
"An employee was standing on a step ladder while arranging a plywood covering to protect the asphalt shingles of a townhouse roof. The plywood slid down the slope of the roof and struck the employee, knocking the employee off the step ladder to the concrete ground. The employee suffered a head injury, concussion, and brain hemorrhage, requiring hospitalization.",1
An employee was replacing hammers on a roller when the roller grabbed the employee and rotated half a turn. The employee suffered a back injury.,1
"A crew was preparing to load a spool onto a trailer to spool up flex-pipe. An employee was trying to guide the center spool shaft into the trailer guide so he could place the guide-pin into the spool shaft when the spool shifted, trapping his left middle finger between the center spool and the guide place. His fingertip was partially amputated.",0
"An employee stood up at a desk, took a step, and tripped over a strap on a backpack that was on the floor. The employee suffered a nasal bone fracture and was hospitalized.",1
An employee was bending a pipe with a metal punch when the punch amputated his left index fingertip.,0
"An employee's wedding ring was caught by a moving forklift, amputating his left ring finger.",0
"An employee was changing a beam on a skid steer using a hammer when a chip of steel broke loose and punctured the employee's left arm, requiring surgery and hospitalization.",1
"Two employees were repairing the baghouse door on a warehouse roof. One of the employees stepped back and a portion of the roof gave way. The employee then fell approximately 15 to 17 feet to the concrete floor of the warehouse, striking a hoist on his way own. He was hospitalized with skull fractures, vertebrae fractures, and a torn ligament.",1
"An employee was investigating a ""hopping belt"" on a ski lift pulley when the pulley grabbed his left ring fingertip, amputating it to the first knuckle.",0
"An employee fell 20 feet while installing a metal roof, suffering a broken pelvis.",1
"While returning from lunch and entering the yard office doorway, an employee tripped on a step and fell, suffering multiple fractures to the right leg and ankle.",1
"An employee used an air hose to blow lids that had fallen on the floor into a pile. While walking by the lids to get a broom and dustpan, the employee slipped on the lids and fell, landing on and breaking her left wrist.",1
"On October 12, 2017, an employee was removing a piece of scrap wood from a conveyor when the employee's right ring finger was pinched and amputated between two rollers on the conveyor.",0
"An employee was operating a stand-up forklift when the forklift veered to the left and impacted a bollard. The employee's left foot was crushed and de-gloved between the lift and the bollard, requiring hospitalization.",1
"An employee was cleaning while standing on the back of a hopper trailer when the employee slipped and fell due to wetness and grain dust, breaking a wrist, kneecap, and pelvis. The employee was hospitalized.",1
"An employee was using a wrench to tighten a bolt on the back of a welder when the welder came down on his left hand, lacerating and fracturing it.",1
"An employee was servicing a boiler at a client location. The employee was removing the belt from the motor on the outside of the boiler when the boiler started up, causing the power transmission belt to grab his finger and pull it into the ingoing nip point between the belt and pulley, amputating the tip of his left middle finger. The boiler was not locked out at the time.",0
"On October 13, 2018, an employee was adjusting a hose on the back side of a mill machine when his sleeve was caught in a rotating shaft resulting a contusion to the arm.",1
An employee was operating a miter saw to cut aluminum when the blade amputated his left index finger. He was hospitalized.,1
An employee was descending a pigeon hole ladder to transfer from one vessel to another when the employee's right foot was crushed and fractured between the vessels. The employee was hospitalized.,1
An employee was caught between a reversing electric forklift and racking as the forklift brought a pallet from a second level rack to the floor.,1
"On October 13, 2017, an employee was operating a crane to move a counterweight block when his left ring finger was pinched between the counterweight block and the frame of an adjacent automatic saw. His finger was fractured and lacerated, requiring hospitalization and surgery.",1
"On October 13, 2017, an employee was untangling steel tubing on the front load end of a plating line when the machine recognized a change in tension and began pulling the tubing, which then pinched and amputated the employee's right ring fingertip. The machine was powered on at the time of the incident.",0
An employee was attempting to clean a hopper screen when his right-hand index and middle fingers were caught and amputated by the blades of the hopper's dust collection system. The hopper was not locked/tagged out at the time.,0
"Employees were offloading pipes from an 18-wheeler and laying them on the ground. The operator dropped the load too soon, and the pipes struck an employee's left leg, breaking the tibia in two places.",1
"An employee was wearing gloves while replacing a track tensioner on an excavator when his right hand was caught between the machine's track adjuster and the metal tracks, amputating his middle fingertip without bone loss.",0
"An employee's glove was caught under a pallet jack, amputating the left index fingertip between the knuckle and first joint.",0
An employee suffered a broken leg while putting a hydraulic dock plate back in service.,1
An employee was pinned between two pieces of equipment.,1
"An employee was inspecting a paper machine when his right hand contacted the blade of an unguarded fan, partially amputating his right thumb.",0
"An employee was operating a foot-operated drill when his right ring finger was caught in the drill press area, amputating 1 inch of the finger. The drill's safety hold back device was not used at the time.",1
An employee was working on a pallet flipper machine when the machine unexpectedly started and injured the employee's hand.,1
"An employee was standing on an empty pallet and either tripped or fell off of it, landing on the right side of his body and suffering a possible broken right hip.",1
An employee fell from a dock door and broke the lower right leg.,1
"A temporary employee was cleaning when he made contact with a winged tail pulley, lacerating his arm and fracturing his elbow.",1
"An employee was on a ladder removing overhead sprinkler piping with a reciprocating saw when the employee fell from the ladder to the concrete floor, suffering head trauma that required hospitalization.",1
"As boats were being separated, a cleat from the stern line of a boat broke loose and struck an employee's leg, fracturing the right tibia.",1
"An employee was using a pallet jack to move a box when a piece of metal fell out of the box and landed on his hand, amputating a finger.",0
"Two employees were working on a robotic spot welder when one employee initiated the machine, which then partially amputated the second employee's right index finger.",0
A security guard fractured his right ankle while subduing a patient.,1
"An employee was pulling on a rope that was trapped under construction material when the rope freed unexpectedly, causing him to lose his balance and fall backward onto the floor. He broke his hip and wrist.",1
"An employee was unloading a truck when he fell out of the truck and suffered a head injury, requiring hospitalization.",1
"An employee was inspecting a roof when she fell off the ladder and hit the concrete below, fracturing her skull and right wrist. She was hospitalized and had surgery.",1
"An employee was ground spotting for a wheeled loader in the vehicle dismantling area when a vehicle shifted, pinning the employee between it and a pile of crushed vehicles. He suffered hip and knee injuries that required hospitalization.",1
An employee was operating a tugger to pick up racks in a main warehouse aisle when she slid into some parts containers. The containers fell on her resulting in a c-spine fracture.,1
"An employee was climbing a rolling ladder when he slipped and fell to the floor, injuring his hip.",1
"An employee was greasing valves when he lost his footing and fell backward on a fluid pumping trailer. While he was falling, his right leg was caught in a 6-inch gap between the bumper and trailer, breaking his right fibula and tibia.",1
"An employee was pressure-washing slag through a 3-inch port at the bottom section of a boiler. While blasting the slag, the employee lost his balance and released his grip on the pressure-washing lance. He slipped and fell backwards into a wingnut protruding from a hatch on the boiler and lacerated his right thigh.",1
"An employee's right index finger was crushed by a rig floor during rig-down operations, resulting in a fingertip amputation.",0
An employee was loading an A-frame when it fell on his legs and then feet. He was hospitalized and had foot surgery.,1
"An employee was bitten by a rattlesnake while walking through brush, requiring hospitalization.",1
"An employee was working in the laundry room when he heard a noise from a washing machine. He opened the running washer and his arm may have became wrapped in a sheet and rotated. His arm was badly broken, resulting in an amputation below the elbow.",0
"An employee was operating a forklift when her leg was caught between the forklift body and a steel structure, breaking her ankle and requiring hospitalization.",1
"An employee was conducting an HVAC pre-install/removal inspection prior to crane arrival on a roof when the employee fell 11 feet off the roof to the ground, suffering broken vertebrae.",1
"On October 14, 2017, at approximately 7:00 p.m. an employee was hospitalized due to a possible heart attack after restraining a combative patient.",1
A temporary employee suffered a right thumb amputation while attempting to remove a piece of meat that was hanging from a meat grinder. The grinder was guarded at the time.,1
"An employee was about to descend a ladder when the employee's hand slipped. The employee then fell backward and hit a manhole opening, suffering a back contusion.",1
"An employee was unloading gypsum from a trailer when he heard an air leak and tried to locate it with his gloved hand. His glove was then caught in a rotating PTO shaft and his left hand was pulled into the shaft, breaking multiple fingers and requiring hospitalization.",1
An employee was loading tempered glass one piece at a time when a stack of 10 panels fell on the employee. The employee suffered a fractured pelvis.,1
"An employee was using an auger to dig a hole for a sign. The auger bit went down approximately 3.5 feet when it reached clay soil, which pulled the auger down toward the ground. The employee's right middle fingertip was then caught and amputated between the auger handle and the sidewalk.",1
An employee was operating a grinding stone to sharpen knives and amputated a fingertip.,0
An employee was using a knife to gut a carcass. The knife slipped and lacerated his knee. The employee was hospitalized.,1
"On October 14, 2017, at approximately 10:45 AM, an employee was using a hoist to move a basket containing a tool stack (approximately 1,060 pounds). He was using his left hand to operate the hoist remote while his right hand was on the basket. As the basket landed, the tool stack shifted, pinching and amputating his right middle fingertip.",0
"An employee was cleaning out a concrete mixer when his right-hand fingers were caught between the mixer door, amputating his third and fourth fingertips.",1
An employee was driving a forklift and blacked out. The forklift struck the center support beam and the employee was hospitalized for a head injury.,1
An employee was cleaning a conveyor belt roller when it caught and lacerated her right hand.,1
"An employee was involved in horseplay with another employee when he tripped, fell backwards, and hit his head on the tile floor. He fractured his skull and was hospitalized.",1
An employee was draining water from a reactor vessel and was opening a low point bleed on the vessel when a flash fire occurred. He was burned on the hand and face by a combination of water and residual chemical catalyst.,1
An employee was kneeling and scanning packages when she was bumped and knocked down by another employee who was walking by. She injured her hip and was hospitalized.,1
"On October 15, 2017, an employee was operating a stand-up forklift in the warehouse. While backing from a rack system the forklift bumped a rack and the operator's fingers were crushed between the rear of the stand-up forklift and the racking system.",1
An employee was walking when she twisted and fractured her left ankle.,1
"An employee was assisting with carpet roll wrapping. He was starting to roll on the wrap cradle when his hands were caught in loose carpet and pulled into the wrap cradle. He suffered bilateral contusions to both arms, muscle trauma, and an avulsion to the right side of his face near his eye.",1
"An employee was gassing up a furnace and attempting to light the pilot using a wand (igniting device). During a previous shift, one of the furnace's two gas valves was left open. When the employee began the start-up process, he opened the main gas valve without noticing that the other valve was already open. The front door on the furnace was open and a flash fire occurred, causing burns to his hands and forearms.",1
"An employee was mixing chemicals in the compound room when the chemical mixture ignited, burning the employee's face, arms, and hands.",1
"On October 16, 2017, at 2:30 p.m., an employee was operating his wire screen weaving machine when the material quality began to diminish. He went around to the press rollers and loosened the bolts holding them in the loom. The press rollers, which were unsupported by a cart at the time, then fell out of the machine and onto his right ankle, causing a traumatic displaced trimalleolar fracture.",1
"An employee was re-positioning the strap on a bundle of pipe when his head struck the milled end of one of the pipes, lacerating the left side of his head near his eye.",1
"An employee was offloading a pump from a trailer when the employee was struck in the right leg by the pump, requiring hospitalization.",1
"On October 16, 2017, at approximately 3:30 PM, a cat-line was attached to a cable to raise up a rig floor. An employee was attempting to un-pin the floor to remove it when the cable snapped and the floor fell on the employee, striking him in the back and pinning him for approximately 10 seconds. He fractured his spine.",1
An employee was cutting wood blocks with a chop saw when the saw blade amputated his left index finger. The saw was guarded at the time.,0
An employee was attempting to align railcar couplers when his left thumb was caught and partially amputated (60 percent) between the couplers.,0
"While operating an inserting machine, an employee pushed down the machine's strap. The employee's right middle and ring fingers were then clipped by the chain and pulled into the sprocket, amputating both fingers. The machine was running and unguarded at the time.",0
An employee was rehearsing a dance routine when she fell and struck her head on the floor.,1
"An employee was transporting a 20-foot-long bundle of metal wall panels with an overhead crane when the bundle became unbalanced and slid to one side. The employee was then caught between the load and another stack of finished panels, suffering a right leg fracture.",1
"An employee tripped over a pallet and fell to the floor, fracturing his left hip.",1
"An employee was descending a 6-foot step ladder and missed a step. The employee then fell and suffered a hip fracture, requiring hospitalization.",1
"An employee was raising a manhole cover/ring to the proper height when the cover/ring was caught on some cable and fell on the employee's right index finger, amputating the fingertip.",0
An employee was attempting to clean out the auger area of a machine when the auger caught and amputated the employee's left middle finger. The machine was running at the time.,0
"A temporary employee was attempting to reset a safety roller in the housing of a conveyor when the conveyor belt caught the roller and pushed it into another roller, creating a pinch point. The employee's left ring fingertip was then caught in the pinch point and amputated.",0
"An employee fell from a 6-foot stepladder and hit the floor, suffering a compound fracture to the right forearm that required hospitalization and surgery. The stepladder was not braced at the time.",1
"An employee was struck by a falling tree limb, suffering a fractured back and multiple broken ribs.",1
"An employee was using a miter saw when it lacerated the employee's left wrist, requiring surgery and hospitalization.",1
An employee was flattening yarn in an extruder machine when his right hand became caught in the machine's rollers.,1
"On 10/16/2017, an employee was in an aerial lift cutting a tree with a chainsaw. He put the saw down on the tree and went to break off a tree limb to throw it clear of a fence. The chainsaw began to move and he went to stop it. The saw then revved up and amputated his left pinky finger to the first knuckle.",0
An employee was making collars for pedestal fans on a press when the machine powered on and amputated the employee's right index fingertip.,1
"An employee was operating a printing press when the employee's left hand was caught in an unguarded pinch point on the machine, fracturing two fingers.",1
"An employee was cleaning a mixer when his right hand contacted the mixing blades, amputating his index finger.",1
"While working on a roofing mission, an employee experienced heat stress symptoms, including nausea, vomiting, leg problems, and hypotension. The employee was hospitalized for dehydration.",1
"An employee was taking a patient's vital signs when she bent forward and her foot was caught on a chair. She then fell to the floor, landing on her left elbow and left knee and fracturing her left shoulder. She was hospitalized.",1
"A truck driver and an employee were holding a toolbox crate on a truck lift gate. The toolbox was too heavy for the lift gate. A second employee was taking things out of the toolbox to lighten the load. The truck driver then let go of the toolbox. It started to roll off the lift gate and fell on the first employee's feet, fracturing his left foot and requiring overnight hospitalization.",1
"An employee was operating a clamp truck and pulling it into the battery charging area to park it. Her left foot was outside the confines of the clamp truck and struck a railing. Her left foot was then caught between the clamp truck and the railing, fracturing her big toe and avulsing the skin from the big and middle toes. She was hospitalized.",1
"On October 16, 2017, at 12:15, an employee was laying roofing material when he suffered a cramp, lost his balance, and fell 5 feet onto the roof, fracturing multiple back vertebrae. He was hospitalized.",1
"On October 17, 2017, three employees were testing the voltage of electrical equipment that was not labeled as high voltage during Hurricane Maria operations when an arc flash occurred. One of the employees suffered burns that required hospitalization.",1
A campus security guard was escorting trespassers off campus property when the trespassers surrounded the employee who felt threatened. The employee then suffered a heart attack as the incident was occurring.,1
"An employee was operating a 48-inch laminator when the employee became caught in the machine's rotating parts resulting in dislocation of a hand and wrist, a fractured forearm, and displacement of skin on the forearm below the elbow.",1
An employee was using a cleaning scrub pad and water hose to clean a horizontal mixer when his right hand entered the mixer opening and was caught in the machine resulting in a finger amputation.,1
"An employee was helping a customer with a sale, tripped over an object and fell, injuring a hip.",1
"An employee was climbing into the cab of a tree trimming machine when he lost his balance and accidentally closed the door on his left middle finger, amputating his fingertip.",1
"An employee fell while climbing a ladder, landing on a concrete patio and breaking bones.",1
An employee was performing residential framing when a telehandler knocked the employee down and ran over the employee's right leg.,1
An employee fell approximately 16 feet from the top rung of a fixed ladder into a service closet resulting in a fractured left ankle and a dislocated right shoulder.,1
"An employee was standing on a 6-foot platform ladder while attempting to get his welding wire to feed properly through his weld wire feeder. He fell off the ladder and landed on the hook of a torch cutting station stand, suffering a laceration that was approximately 5 inches long and required surgery.",1
"An employee was removing or changing three dies on a hydraulic press brake when the top die, weighing approximately 250 pounds, fell and crushed the employee's left index fingertip. The fingertip had to be surgically amputated to the bottom of the nail.",0
An employee was repositioning a log that slipped off a splitter. His hand was under the wedge when the log splitter amputated his left pinky fingertip.,0
"An employee was cutting materials using a saw when he lacerated his left thumb, requiring surgery. The saw was unguarded at the time.",1
"An employee was working in a caged area outside the building when he hit the right side of his face on an insulated pipe, suffering a head contusion.",1
An employee was inspecting/searching for an embossing roll stored on an A-frame storage rack. The employee was turning a roll to look for a marking when another roll on the same rack slipped. The employee's finger was caught and partially amputated between the roll and storage rack.,0
"On 10/17/2017, at 3:15 PM, an employee was pulling a gate closed when it came off its rollers and struck his right big toe, breaking it. He was hospitalized and had surgery.",1
An employee was walking down a hill after clearing trees when he slipped and landed on a tree stub. The stub punctured his buttock and required hospitalization.,1
"An employee was on a roller conveyor attempting to replace a chain on a sprocket to get a pipe to move. Another pipe was placed on the conveyor, causing the sprocket to move. Both of the employee's hands were then caught in the sprocket, amputating the left index finger at the first knuckle and the left middle fingertip.",0
"An employee was using a stand-up forklift to check tires on racking when the employee fell from the lift to the floor, injuring the mouth, knee, and shoulder.  The employee was hospitalized.",1
"An employee was disconnecting two adjoining 4"" hoses from a slurry pump when he was splashed by residual hot material left in the hose after a cavitation. He suffered burns to his leg and arm, requiring hospitalization.",1
"An employee was working on machinery at a height of approximately 15 feet when the employee fell into a pit under the machine, breaking an arm and ribs.",1
An employee sustained burns to his right fingers while he was working on a machine that produces spring roll wrappers.,1
"An employee was positioning cords bar to start roofing work when he stepped on a power cord, slipped, and fell 20 feet to the ground. He injured his back and was hospitalized.",1
"An employee was putting a well online with a wrench when the flow line blew up. The employee received lacerations to the right arm, and the left ankle was nearly amputated.",1
"On 10/17/2017, an employee was disassembling scaffolding and unbolted a section of the tower using wrenches. As he started to climb down, he grabbed the loose section of the tower and it gave way. He then fell about 12 feet to ground, fracturing a vertebra and both heels.",1
"An employee was struck by a moving cargo tug, fracturing her right ankle and lacerating her left leg.",1
"On October 17, 2017, an employee was polishing a part on a manual lathe with an emery cloth while wearing gloves. The emery cloth or glove became entangled in the lathe's rotating part, and the employee's right middle finger was partially amputated.",0
"An employee was digging a hole near a broken electrical panel when he made contact with the panel, suffering a 1-inch cut on his left pinky finger. He was hospitalized.",1
"A forklift was carrying two 600- to 700-pound gates made from pipe steel. An employee's arm was then pinned between the gates and a flatbed truck. His arm broke and was lacerated, requiring hospitalization.",1
An employee was attempting to remove a manhole lid when it slipped and pinched his left middle finger between the lid and the manhole rim. Skin was removed from his finger (no bone or fingernail loss).,0
"An employee was attempting to repair a conveyor system when his arm was caught between the conveyor belt and guard, suffering multiple closed fractures.",1
An employee was doing preventative maintenance at a 480-volt motor control center. He was holding a screwdriver in his hand while tightening connections and cleaning at the line side of the breaker when an arc flash occurred. He suffered second degree burns to both hands.,1
"On October 17, 2017, an employee was testing the voltage of electrical equipment when an arc flash occurred, causing first degree burns to his hands and left arm. He was hospitalized. The equipment was not labeled as high voltage.",1
An employee was bitten on the backside by a black widow spider while using a portable toilet.,1
"An employee's arm entered the trimmer portion of a binding machine. His arm snapped in three places, resulting in a compound fracture, a deep laceration, and muscle and nerve damage.",1
"An employee was standing and supervising the take-down of a pole and lines when the pole cracked, broke in half, and fell toward the employee. The employee avoided being struck by the pole but fell to the ground, suffering broken ribs, a broken pelvis, and a collapsed lung.",1
"An employee was working outside behind a building, riding an all-terrain vehicle, when the throttle was jammed into full force and he lost control, striking a backhoe located on the property. He suffered severe lacerations to both the left arm and left knee, requiring hospitalization.",1
"An employee was helping another employee to roll a spool when the spool shifted. The injured employee attempted to hold onto it to keep it from falling to the ground. The injured employee's right forearm then became caught in between the spool and the cross members of a paint cart, suffering a compound fracture. The employee was hospitalized.",1
"An employee was feeding metal into a press brake to break it. He was holding the metal with one hand when the press brake die descended and struck his fingers. He suffered two broken fingers, one cracked finger, tendon tears, and lacerations.",1
"An employee was securing a load to a flatbed truck when the employee fell from the truck to the ground, fracturing the right wrist and possibly the right foot. The employee was hospitalized.",1
"An employee was directing small trucks in a parking lot while riding a scooter. After directing a coffee truck towards the dock area, he was returning to his original spot when he was struck by a truck. He suffered injuries to his back and multiple other body parts.",1
"On October 17, 2017, an employee was setting a part in a lathe when the employee's left fourth digit was caught and amputated between the part clamp and the bottom spindle of the machine.",0
"An employee was using crossover stairs to bring tools to another employee when his foot slipped off the second to last tread and he fell. His back hit the stairs, suffering blunt trauma and contusions. He was hospitalized.",1
"An employee was repairing a top conveyor belt when he dropped a tool and his sleeve was caught by the lower belt roller, pulling his arm backward toward the belt. He suffered an elbow dislocation and fractured ulna. The lower belt was not locked/tagged out at the time.",1
An employee was using a lathe with a grinder attachment to re-surface a roller. He was attempting to remove a pile of cuttings from the lathe when his right thumb entered a nip point created by the rotating material and grinder attachment. His right thumb was amputated to the first knuckle. The lathe was running at the time of the incident.,0
"An employee was fixing a skewed board in the sorter machine, stubbed a toe and fell off the 42"" sorter platform to a catwalk. The employee suffered a deviated nasal septum requiring surgery.",1
"An employee was preparing to conduct a preventative maintenance inspection on an HVAC unit. The employee locked out the unit and placed a finger on the fan belt to slow down the fan. The employee was then pulled into the gear belt, suffering an amputation to the left index fingertip.",0
An employee was working/cleaning near a running conveyor when the employee's cotton glove was pulled into the conveyor. The employee's right arm was then fractured by the conveyor's sprocket mechanism.,1
"Two employees were tightening up a connection on a pump when the wrench slipped and caught one of the employee's fingers between the skid and the wrench. The employee's finger was severely lacerated, resulting in an amputation to the first knuckle.",0
"An employee was pushing a bundle of lumber on a roller bed when the employee's right ring finger was caught between the lumber and roller, amputating it at the first unit.",1
"An employee was cleaning out debris from a bag filter during maintenance when he came in contact with hot water that was trapped in a vessel. He suffered second degree burns on the left forearm and abdomen area, as well as minor burns on his right arm.",1
"An employee was using a shackle to rig a beam plate. The shackle shifted and caught the employee's left ring finger, pinching and partially amputating the fingertip between the shackle and the steel beam plate.",0
"An employee was pushing on a tree while putting on a wraparound when the lifting sup separated from the well head flange at the threads, allowing the flange to drop and crush the employee's right hand.",1
"An employee was using a circular saw to cut a 2-inch by 8-inch piece of lumber on a saw horse. When he finished the cut, the saw's guard did not retract into the safe position. The blade then lacerated his right outer thigh, requiring hospitalization.",1
An employee was struck by an oil rig weighing 700 to 800 pounds when it fell from a hoist. The employee was hospitalized with crushing injuries to the right leg.,1
An employee fell approximately 13 feet while connecting plates and was hospitalized. Fall protection was worn but not tied off at the time.,1
"An employee was helping place a vault into an excavation when the chain moved. The employee sustained a fractured vertebra, an ear laceration, fractured neck and a possible dislocated shoulder.",1
"On 10/18/2017, at 8:33 AM, an employee was assembling a crate to ship a door. After placing door components in the crate, he used a nail gun to secure 2-inch by 4-inch wood bucks in place to prevent them from moving during shipment. After completing these tasks, he lifted his left leg to step over a door component. The nail gun tip then inadvertently contacted his left leg and fired, puncturing it 6 inches above the knee. He was hospitalized.",1
"On October 18, 2017, an employee was trying to take a sand sample from the molding line when his arm was caught in the conveyor, amputating it to the elbow.",0
"An employee was fabricating a pipe using normal hand tools and a crane when a flange fell on his right foot, fracturing metatarsals 1-4. He was hospitalized for surgery.",1
"On October 18, 2017, at approximately 9:55 a.m., an employee was working on a planned outage and ascending a white pine tree scheduled to be removed. He was in the tree at a height of approximately 59 feet when he inadvertently unhooked the wrong safety strap and fell 68 feet to the sloped ground below. He suffered a partial lung collapse, four fractured ribs, a small cut to the right eyelid, and a hairline fracture to the left leg.",1
An employee was clearing a clog at the bottom of the cooker outfeed using a rod when hot product and grease splashed onto the employee. The employee suffered second degree burns to the upper body.,1
"An employee was connecting air hoses from a truck to a trailer when the employee lost balance and fell off the back of the trailer, lacerating the left leg on the trailer steps. The employee was hospitalized.",1
"An employee was loading a channel (13.5: W X 11"" H X 21' 7"" L, total of 6,145 lbs.) into the channel cradle of a punch press. The employee entered the channel loading platform, which is used to remove banding and straps, prior to the load being placed. While the employee was guiding the load into position at the machine, the bundle traveled past the backstop and continued toward the employee. The employee was then pinned between the load and the railing of the work platform, suffering fractured vertebrae, a bruised lung, and a rib fracture.",1
"An employee was operating an air-powered straight style grinder to polish welds when the disc of the handheld grinder broke apart and went through his face mask, fracturing his jaw. He was hospitalized and had surgery.",1
"An employee was rigging up an I-beam with a jib attachment and a lifting hook on the bottom side. His left pinky finger was caught in a pinch point between the jib and the hook when the signal was given to move the I-beam, amputating his fingertip.",0
"An employee was troubleshooting a golf cart that he uses to travel around the site. The employee reached into the engine compartment to manipulate the starter belt. When he pulled on the belt, stored energy was released and pulled his right index finger into a pinch point between the belt and pulley. He suffered an injury to his finger that resulted in amputation of tissue above his knuckle.",0
"An employee had an allergic reaction to an influenza vaccination, suffering numbness and tingling in the fingers and lips, as well as partial paralysis.",1
"An employee had just been lifted in a crane basket to the top of a bridge pier that was under construction. He unhooked his safety belt lanyard from the crane basket, stepped onto the top of the bridge pier, and waved for the crane operator to move the crane basket away from the pier. Immediately afterward, he lost his footing and fell approximately 18 feet to the ground below, suffering two broken wrists, several broken ribs, and lacerations to the face.",1
"An employee was stepping up on a stool to reach product when the employee fell off the stool. The employee's head struck an adjacent machine or the floor, requiring hospitalization.",1
"While working from a ladder to mark dimensions on a truck, an employee fell from the ladder and injured the right and left wrists and left ankle.",1
"On October 18, 2017, an employee was attempting to retrieve a jammed part near the point of operation on a stamping press when his left fourth finger made contact with the tooling and was amputated.",0
"An employee was standing on the second or third rung of a ladder and using a drill overhead to make a hole for a vent when he hit the back of his head on concrete, suffering a concussion.",1
"An employee sustained the amputation of the index, middle, and ring finger on their right hand from a saw in the slicer room.",1
"While descending a scaffold ladder, an employee fell 15 feet from around the second tier of the scaffold to the ground, suffering a hip fracture and concussion.",1
An employee was on a roof using a power saw to cut two-by-fours at a 45-degree angle when the saw slipped and cut his right leg.,1
"An employee was unclogging a paint sprayer when it fired while his finger was at the end of the nozzle. The paint/toxin was injected into his left index finger, lacerating it.",1
An employee was on a catwalk walking to an oil pit when the employee stepped into an open section of grate that was being repaired and fell 27 inches to the floor below. The employee sustained a broken right leg.,1
"An employee was moving boxes when a box fell and struck the employees' left big toe, fracturing it.",1
"An employee, working at heights above 4 feet, fell while transitioning from a rolling ladder to a machine. He broke his right leg and was hospitalized.",1
"An employee was driving a utility vehicle outside when it tipped and pinned his left leg beneath the frame, causing a compound fracture and lacerations.",1
"An employee fell to the floor while walking, suffering a broken nose and right arm.",1
"A crew was attempting to line up a catwalk with a vee-door. An employee's left hand was resting on the catwalk. The employee signaled the driller on the controls to move the catwalk. The vee-door, which was resting on the catwalk, then shook free and swung down, smashing the employee's left pinky finger.",1
An employee suffered a left ring finger amputation and injuries to his other fingers while cutting molding with a table saw.,1
"On October 19, 2017, at approximately 10:00 a.m., an employee fell from a platform ladder to the ground and suffered a head laceration, requiring hospitalization.",1
"An employee went to the back of the building, opened a wall box, and was attacked by wasps. While retreating, he fell to the ground and broke his hip.",1
"An employee was breaking off lifting washers from pin protectors and hit his finger with a small sledge hammer, resulting in a fracture to the right ring finger.",1
"On October 19, 2017, at approximately 10:15 AM, an employee was cleaning a vacuum conveying system when an automatic mechanical valve closed on his right middle finger, resulting in an amputation to his fingertip.",0
"An employee was part of a rig floor crew that was picking up  2-and-3/8-inch drill pipe to make a connection with a power swivel. The employee grabbed the pipe above the elevators. At that point, 1/4-inch sling cables wrapped around the pipe and the employee's fingers, partially amputating the right middle finger and fracturing the right ring finger.",0
"An employee was climbing onto a crane's folding ladder to enter the crane's cab. His hand was wrapped around the ladder's side rail when he put his weight on the rung to climb the ladder. When he applied weight to the folding ladder, the siderail parts straightened and caught one of his right-hand fingers between the two parts, amputating his fingertip.",0
An employee was changing over and typesetting the print on a press when the printer plate grabbed and de-gloved the employee's left ring and little fingers. The employee was hospitalized.,1
"An employee was going down a ladder/stairway into a basement when he reached for his tool bag and fell 2 feet to the floor, fracturing his hip.",1
"While cleaning a slicer head using chemicals, an employee pulled on a hose that released from a valve. Chemicals (caustic soda) then splashed the employee's face, causing a chemical burn near the eye.",1
"An employee was moving an I-beam by rolling it. The I-beam rolled faster than anticipated, so the employee attempted to grab it. At that point, his finger was pinched between two beams. He lost the end of his finger.",1
An employee was helping another employee move lead-containing sheet rock with a dolly when the lead-containing sheet rock fell on the employee's right ankle and fractured it. The employee was hospitalized.,1
"While trying to remove a piece of fat, an employee had their fingers caught in the de-fatter machine, resulting in amputation of the index fingertip and the middle fingertip on the left hand.",0
An employee was adjusting an edge bander when the employee suffered an amputation to the right third distal phalanges. An interlock was not in place and the equipment was not guarded at the time of the incident.,0
"An employee was cutting a steel object with a propylene/oxygen cutting torch when the remaining steel piece (weighing 2,320 lbs.) shifted and started to fall. The employee tried to walk away, but tripped on an uneven surface and fell into the path of the falling steel piece. The steel contacted his upper thighs and the weight of the material dislocated and fractured his right ankle.",1
An employee was operating the air system on a semi trailer designed to transport building trusses. The employee was lowering the air actuated plate into position and had their right hand where the plate came to rest resulting in a broken finger. The employee was hospitalized.,1
"An employee was using a peeling machine to peel fruit when her right hand was struck and lacerated by the blade, requiring hospitalization.",1
"An employee was operating a microtome to slice tissue. The employee was moving the sliced tissue when the microtome blade, which was still in operation, amputated the employee's left pinky fingertip. The blade was unguarded at the time.",0
"On October 20, 2017, an employee was cleaning near conveyor belts when his right arm was caught in a rotating pulley assembly, lacerating and tearing the skin from his right arm. He was hospitalized and received stitches.",1
An employee's left pinky finger was caught in a metal rolling machine while handling sheet metal.,0
"An employee slipped and fell to the floor while cutting a metal panel, suffering a fractured wrist that required hospitalization.",1
An employee was either sitting or standing on a flatbed truck when he was run over by a skid steer that reversed in the direction of the truck. He suffered a fractured leg and concussion.,1
An employee was attempting to remove a jam on an injection molding machine when another employee inadvertently restarted the machine. A mechanical roller then pinched and amputated the employee's index fingertip (no bone loss).,0
"An employee slipped while attempting to board a skid steer. The employee's left foot was then caught between the bucket and the frame of the skid steer, breaking the left ankle. The employee was hospitalized and had surgery.",1
"An employee was climbing down from the bed of a dump truck when he lost his balance and fell to the ground, fracturing his left ankle.",1
"An employee was grabbing the end ring of a pipe to move it when his right hand was caught between that ring and a second metal ring, partially amputating his right middle finger.",0
An employee was exiting his vehicle while it was being lifted by a tow truck when he fell on his head. He was hospitalized.,1
"An employee was using an electric band saw to cut wood skids (to be used as spacers between pipes before they are buried and backfilled) when his hand was caught under the saw, amputating his pinky fingertip.",0
"An employee was using a wrench to adjust a skirt board on a coke conveyor because product was falling off the conveyor. The conveyor caught the wrench, which then struck the employee's left index finger. The employee's fingertip was removed. The employee was hospitalized for surgery to reattach the fingertip.",1
An employee was operating a loom and attempting to remove fabric lint from it when his right hand came into contact with a moving gear that was located deep behind the fabric yarn and in the frame of the loom. His right pinky and ring fingers were amputated. The loom was running at the time of the incident.,0
"An employee was lowering a blowout preventer (BOP) into position. He placed his hand on top of a stud on the BOP flange while the BOP was being lowered. The stud became hung up and bottomed out on the pipe ram body, smashing his left hand. His left middle finger and knuckle were crushed and required surgery. Impact gloves were worn at the time of the incident.",1
"An employee was feeding a small diameter bar through the plate roller machine when his glove was caught in the roller, pulling his right hand into the machine and amputating the index finger.",0
An employee was adjusting a hopper machine when a piston from a product dispensary tube was accidentally actuated. The piston fractured her right middle finger and lacerated her right hand.,1
An employee was installing a bilge keel chock on a DDG unit when his oxygen/fuel gas hose caught fire and severely burned him.,1
"An employee was pulling a die from a press when the employee's right index finger was caught in a channel on the press, amputating the fingertip.",0
An employee was found unconscious in the ramp area of the facility after placing garbage into an outside dumpster. The employee suffered a broken left leg.,1
An employee was climbing a ladder to access a catwalk to unjam cases from a line when he fell from the ladder and suffered a partially collapsed lung. He was hospitalized.,1
"An employee was holding a pressure washer in his right hand and a drain tube in his left. The drain tube had a small hole in it. When the employee blew water into the drain tube, high-pressure water came out of the hole and lacerated his left hand between the middle and ring fingers. He was hospitalized.",1
"An employee tripped and fell down the stairs, breaking his neck.",1
"While preparing to clean a mix tank, an employee bent down and tightened the clamp. The clamp snapped, shooting out a mixture of hot water and cleaning solution that contacted and caused first degree burns to the employee's face and both forearms.",1
An employee severed his left ring fingertip while rolling up a work vehicle's tarp (no bone loss).,1
"An employee was stepping down from a machine bulldozer when he missed a step and fell, fracturing his left leg and requiring hospitalization.",1
An employee sustained friction burns to the left hand and wrist while reaching between two moving conveyors to retrieve a tape measurer.,1
"An employee was working with a winch to pull a cable with steel ribbing to tighten the ribbing against lagging boards. He had a variable speed controller in one hand to operate the winch, while his left hand was on the cable. When the controller was activated, it pulled his hand into the winch, amputating his left index, middle, ring, and pinky fingers from the knuckle up.",0
"On October 20, 2017, an employee was using a pallet jack to remove material from shelving when the employee bumped material that was leaning up against a shelf, suffering a left foot/toe injury.",1
"An employee was cleaning a pipe with a lance that ejects high-pressure water when the hose burst. The high-pressure water was then injected into his right-hand palm, requiring overnight hospitalization.",1
"An employee was repairing a golf cart and checking the tension when the clutch engaged, catching and amputating 1 inch of his index and middle fingers.",1
"On October 19, 2017, at approximately 10:30 AM, an employee was rigging a steel fabrication project to an electric hoist when the hoist was activated. The employee's right thumb tip was then caught and amputated between the metal project and the rigging strap.",0
An employee was hoisting a load of steel billets with a crane when the employee's right index and middle fingertips were pinched between the steel billets and the chain sling.,1
An employee was on a step ladder working on a soffit and fascia when he fell off the step ladder and landed on a sprinkler head. The sprinkler head punctured his intestines and stomach.,1
An employee was repairing a lawn mower by adjusting the carburetor when the mower ran over his hand and amputated three fingers. The mower was running at the time.,0
"On October 20, 2017, at 11:34 PM, an employee observed a paper jam at an inserting machine. He was attempting to pull the paper out the machine when it pinched his left middle finger, lacerating it and amputating the fingertip.",1
An employee made contact with an overhead powerline while working with a well point injection. The employee was hospitalized.,1
An employee was hand loading a pallet of pulled material for a customer when the pallet of stacked packing material tipped over and pinned the employee down. The employee sustained a hip fracture.,1
"An employee tripped when she stood up from her desk chair and took a step. She fell forward and landed on her right side, fracturing the bone that connects the femur to the hip socket.",1
A temporary employee was performing preventative maintenance on a conveyor when he sustained a fingertip amputation.,1
"On October 20, 2017, an employee received multiple fractures while exiting a revolving door at a hotel conference.",1
"An employee was cutting chicken when he dropped his knife. As he tried to regain control of his knife, it punctured the right side of his chest.",1
An employee was operating a utility vehicle when it hit a pot hole and turned over. The employee suffered a broken left leg.,1
"An employee slipped and fell while walking through the facility, suffering a fractured ankle.",1
An employee was using an electric pallet jack when it ran over her left foot.,1
"An employee was attempting to clean the index sensor on a bracket welder because of a machine fault. This did not clear the fault, so the employee attempted to clean the fixture. When the employee cleaned the fixture, the fault cleared and the machine actuated. This caused the magnet to come down on the employee's left index finger, amputating the finger at the second digit.",0
"An employee was working with a depositor machine when the employee's index finger contacted the depositor, amputating it from the fingertip to the knuckle. The machine was unguarded at the time.",0
An employee was pushing a cart out of a storeroom when the employee was struck by a transport cart being pushed by another employee. The employee suffered a fractured lower right leg.,1
"An employee was attending to a horse when it kicked his hips. He suffered a dislocated hip and broken pelvis, requiring hospitalization.",1
An employee suffered an abdominal hernia while reaching overhead for a box of pineapples.,1
"An employee was walking into the receiving area to get a cart when she tripped on something or her knees gave out, causing her to fall and injure her left hip.",1
An employee was rolling a pipe by hand when his right pinky finger was caught between the pipe he was rolling and a stationary pipe. His fingertip was crushed and had to be surgically amputated.,1
"An employee was using a band saw to cut ribs when he stumbled and lost his balance. He put his hand out to catch himself and it hit the saw blade, amputating the right index finger. He was standing on a floor mat and wearing slip-resistant boots at the time of the incident.",0
An employee was trying to unjam a plastic lid from a conveyor when his right middle finger was caught and amputated in the conveyor.,0
"An employee was using a gas-powered pressure washer to clean the inside of a walk-in cooler. The gas pressure washer was placed outside of the cooler in the production area. After completing the job, he became ill from carbon monoxide poisoning, requiring hospitalization.",1
An employee was participating in physical training when he became ill and fatigued. He was hospitalized with a suspected muscle injury.,1
"An employee was inspecting a two-story residential roof for hurricane damage. While climbing a ladder from the first level to the second level, the employee fell from the roof of the first level and suffered a broken left arm.",1
"An employee was working with a material handling system on an injection molding press and moving boxes of plastic components. She turned to move and her foot caught the leg of a table, causing her to lose her balance and fall to the floor. She broke her hip.",1
"On October 22, 2017, at approximately 8:30 PM, an in-bounder was operating a reach lift truck, when the operator lost control, stuck his foot out, and pinched his left foot between the truck and a concrete bollard. The operator suffered a left foot heel avulsion fracture.",1
"An employee was operating a forklift when a piece of scrap steel popped up and struck his leg, breaking it.",1
An employee was cutting meat when his hand guard (made out of stainless steel) hit the blade of the electrical saw. He received a laceration to his right index finger.,1
"An employee was lighting a boiler when a propane flashback occurred, burning the employee.",1
"An employee was driving a forklift when it struck a pallet and a rack, which dislodged a metal bar. This bar struck and lacerated the employee's left thigh, rupturing a blood vessel.",1
An employee was found lying on the floor by two other employees who were passing through the area. He suffered minor bruises to his body.,1
"An employee fell from an elevated lift platform while installing wall sheeting on a residential property, suffering paralysis.",1
"An employee was operating a scissor lift when a steel beam swung and struck the employee and the lift. The scissor lift tipped over, and the employee fell 10 feet to the concrete floor, suffering a fractured hip and pelvis.",1
"An employee was climbing a concrete form wall when the wall shifted. The employee then fell about 6 feet to the ground, breaking ribs and requiring hospitalization.",1
"An employee was hooking up equipment to torque test when he stepped onto a wing valve that was 2 feet off of the ground. The wing valve broke, causing him to fall onto the ground. He suffered broken ribs and lower back injuries that required hospitalization.",1
"An employee fell to the ground at a construction site, breaking his left leg.",1
"An employee got into a confrontation with a customer and jumped on the customer's car. When the customer pulled off, the employee fell to the ground below, breaking his leg.",1
"The injured employee was hanging parts on the paint conveyor. A forklift operated by another employee in the area was dropping off a pallet of parts. As the forklift backed up, it snagged the hanging pendant control for the overhead hoist. The pendant control was flung back towards the employee hanging the parts and struck the employee's left arm resulting in a fractured forearm.",1
"An employee was cleaning out the feed-wheel of a wood chipper when the trailer jack holding the feed-wheel in place slipped out. The feed-wheel then struck the employee's left forearm, fracturing and lacerating it.",1
"An employee moved a trailer into the dock to be unloaded. When he opened the trailer door, two bundles of scrap fell out and struck him, breaking his right ankle and knee.",1
"An employee was painting a bilge and fell about 2 feet through a deck plate, injuring his right temple and the inner side of his right knee.",1
"An employee fell approximately 40 inches to the ground while walking on a flatbed trailer and arranging a rack system, suffering broken shoulder bones.",1
"An employee was hooking up a trailer with scrap lumber in it to a pick up truck. The trailer rolled and as the employee got out of the way of the trailer, a piece of lumber struck the orbit of his eye. The orbit was fractured and required surgery.",1
"An employee was attempting to stab a piece of pipe while tripping in a hole when a boom gate fell on the employee's left foot, fracturing a metatarsal. The boom gate was up and in motion at the time of the incident.",1
"An employee was operating a roll bender when the employee's left hand was pulled into the machine's point of operation, amputating the fourth and fifth fingers.",0
An employee stepped backwards and tripped over another employee's foot. The employee sustained a fracture of the left wrist.,1
"An employee was removing a piece of metal coping from a hydraulic brake press when three of his right-hand fingers were caught in the press, amputating the three distal phalanges.",0
"An employee was performing maintenance on an aircraft's main landing gear. He removed a pin from the drag brace on the main landing gear and placed his thumb in the hole that the pin was in. The drag brace then shifted, amputating his right thumb tip just above the first knuckle.",1
"An employee was securing a trailer to a truck with a hitch when another employee bumped the trailer with a piece of equipment, pushing the trailer forward. The first employee's left thumb was caught and crushed between the trailer and the truck.",1
"An employee was placing trash in a bin when aluminum poles that were leaning against the wall fell on him, striking his head and fracturing his vertebrae.",1
"An employee tripped over a fan that was used to dry carpets that were being cleaned and fell, fracturing an arm/shoulder.",1
An employee was operating a fiberglass pipe-making machine when his left gloved hand was pulled into the mandrel. He suffered muscle damage and his left pinky finger had to be surgically amputated.,1
An employee was working at a shaker table to properly dispose of oil and gas drilling waste when a water pump created an arc flash that burned the employee's face.,1
"An employee had just rigged up a 3/4"" thick plate (10'x 6') with a single hook chain. The chain was choked through a hole in the center of one edge of the plate. The employee was standing near the plate while an equipment operator was raising the plate with an excavator. The chain came loose, and the one edge of the plate that was 2.5"" in the air came down on the employee's toes resulting in amputation of two toes.",1
"An employee used a collapsible ladder to access a roof. After setting up the ladder and checking it for stability, he began to climb up the ladder. He reached the roofline and began transitioning to the roof when the ladder began sliding underneath his feet. He began sliding with the ladder, and his legs went between the ladder's rungs. He then fell backwards, landing on his back on top of the ladder and fracturing his T-12 vertebra.",1
"An employee was walking outside when she tripped over a small sign and fell in the parking lot, suffering a possible wrist fracture and bloody nose.",1
"An employee was moving product with a double pallet jack when he drove into a parked forklift, lacerating his ankle and requiring surgery.",1
An employee was operating a forklift. He had placed a stack of pallets down and was reversing with his left foot partially outside the forklift body when his left foot struck and was caught between a column and the forklift. His foot was partially amputated.,1
An employee was training on a Swege machine when her right middle fingernail was caught in the machine resulting in a right middle finger amputation.,0
"An employee slipped on oil while walking and fell, suffering arm pain.",1
An employee slipped and fell on a slippery floor in a patient's room and tore a hamstring.,1
"An employee climbed a pole to work on an order when the pole fell over. The employee also fell to the ground, and the pole landed on his legs. He fractured his back.",1
"An employee in an order picker was traveling backwards at a height of approximately 4 feet when the picker struck a racking guide rail. Upon impact, he was thrown from the machine to the floor, suffering head trauma and skull fractures. PPE was not worn at the time.",1
"An employee was walking under a spool of coil tubing to assist another employee. When the employee reached up and grabbed the tubing, his left hand was pulled into a pinch point between the tubing and a roller. The employee tried to get his left hand out of the pinch point using his right hand, but his right hand was also caught in the pinch point. He suffered multiple fractures and lacerations to both hands, requiring surgery and hospitalization.",1
An employee was on a ladder removing a variable air volume box (VAV) from the ceiling when he fell approximately 5 feet off the ladder. The VAV box landed on his right leg. He was hospitalized with a broken right leg.,1
"An employee was standing on the back of a lift gate when he attempted to kick a strap into the trailer, lost his balance, and fell to the ground, injuring his back.",1
An employee was cutting wood with a saw when he received cuts to two tendons and broken bones.,1
"An employee was using a table saw when it deeply lacerated the employee's left forearm, requiring surgery.",1
"On October 23, 2017, employees were cutting cross frames and a girder as part of the demolition process for a bridge. While torch cutting the girder, one employee connected his personal fall arrest system to a beam clamp that was connected to the tail section of the existing girder. The tail section was supposed to remain in place when the rest of the girder was dropped. After the employees finished cutting the girder, the tail section fell from its bearing and pulled the employee approximately 13 feet to the ground. He suffered a broken wrist and back injury.",1
An employee was cutting cardboard with a box cutter when it amputated his left thumb tip.,0
"An employee was descending the built-in steps on an aircraft baggage belt loader when he missed a step and fell approximately 3.5 feet to the concrete parking ramp, striking his head. He suffered a possible concussion and pulled groin.",1
"An employee was bulldozing parallel to a hill while installing an oil and gas pipeline on a 32-degree slope when the bulldozer tracks made contact with two large sandstone rocks. The bulldozer became unstable and rolled over. The employee suffered rib fractures and a dislocated shoulder, requiring hospitalization.",1
"An employee was standing on a 22-inch wooden box while drilling holes into an aircraft panel when he fell off the box and hit the floor, fracturing his arm and lacerating his head.",1
"An employee was standing three rungs up on an open step ladder using a pry bar to pry plywood off from studs when the pry bar slipped. He then lost his balance and fell to the ground, fracturing his left hip/femur.",1
"An employee was repairing the engine on a construction vehicle when he fell 42 inches off the back of the vehicle's bumper and struck his head on the floor, suffering a concussion.",1
"An employee was about to inspect and solve a leak on a condenser door when water pressure from the condenser caused the door to blow open. The water pressure then impacted the employee, who suffered a fractured leg, rib, and skull.",1
An employee was installing an overhead electrical power line. The tool the employee was using contacted the ground creating a direct short. The employee was hospitalized for electrical flash burns to the face.,1
An employee suffered a finger amputation while using a radial arm saw.,1
"An employee was using a drift mandrel to check for the proper diameter inside a valve. His ring and middle fingertips on both hands were in machined holes on either side of the drift he was pushing into the valve when the drift became stuck. As he tried pushing the drift harder, the drift broke free and went into the valve, severing his four fingertips.",1
"On October 24, 2017, employees were exposed to high levels of carbon monoxide while working in an office. One employee was hospitalized.",1
"Two employees from two different companies were using a manlift to set a valve on a wellhead. The rigging from the crane carrying the wellhead became bound with the well, causing it to kick. The valve then loosened from the carrying straps and fell 14 feet, hitting the manlift. The two employees were knocked out of the manlift and fell 9 feet to the ground. One employee suffered a broken leg and was hospitalized. The other employee suffered minor injuries.",1
"While cutting metal parts with a saw, an employee received a severe right arm laceration from the blade.",1
"An employee was operating a roll groover to press a groove into the ends of pipe for coupling purposes. He was checking the depth of the groove with his right index finger when it was caught in the point of operation, amputating it between the first and second knuckle.",0
An employee was trying to turn on an electric fan used by employees working on the line when he was struck by a door carrier. The door carrier then pushed him into a steel guard.,1
"An employee was taking clothing hangers to a clothing rack when she tripped over the rack and fell, fracturing her left hip and left elbow. She was hospitalized.",1
"An employee was struck by a golf cart that a coworker was reversing, suffering a broken leg.",1
"An employee fell while climbing a grain pile to secure a tarp, suffering a right leg fracture that required surgery.",1
"An employee was working at a stationary grinding machine to grind off the top layer of a conveyor belt. The employee was wiping debris off the top of the conveyor belt as it came out of the grinding wheel when the employee's right index finger came in contact with the grinding wheel, amputating the tip.",0
An employee was building a shipping crate using a pneumatic nail gun when he accidentally shot a nail into his left middle finger.,1
An employee was conducting a visual inspection of newly installed air heater seals used to preheat a boiler when his right pinky fingertip was amputated.,0
"A spotter was directing a boom lift operator to move the boom lift forward and providing start/stop signals. The spotter was walking in front of the boom lift when the boom lift operator moved forward and struck the spotter, knocking him down and pinching his left leg between the boom lift frame and the ground. The spotter suffered multiple fractures, with an open traumatic wound to his left foot and ankle.",1
An employee amputated a fingertip while cutting meat with a band saw.,1
An employee slipped while stepping down out of the cab of his paving truck. He fell to the ground and broke his hip.,1
"An employee was moving a 600 lb. piece of steel with a magnet crane when the steel fell from the magnet and landed on his right foot. He was hospitalized and had surgery.

Note: No amputation",1
An employee was cleaning inside a blender when it was activated by another employee. The blender paddle then broke both of the employee's legs.,1
"An employee was helping a heavy equipment operator move a joint of pipe by holding a tag line. As he was walking with the pipe, he stepped on a rock and lost his balance, falling onto and breaking his right leg. He had surgery.",1
An employee was walking down a corridor when he opened a metal door that had an electrical current due to a pinched wire from temporary lighting in the corridor. He received an electrical shock.,1
"An employee was operating a slitter machine when the employee's right hand was caught in the machine, causing an amputation to the little finger.",0
"An employee was securing a tarp on a maintenance building office roof when the employee stood on and fell through a skylight, landing on the concrete floor below and sustaining head trauma.",1
"An employee was testing a 20-horsepower motor when his left ring finger came into contact with the 100-pound rotor, which was spinning at 10,000 rotations per minute. His finger had to be surgically amputated at the second joint.",0
"An employee was setting an electrical pole into the ground. As the pole was being raised, the choker on the pole slipped, catching the employee's third left finger in a pinch point. The distal portion of his finger was amputated.",1
An employee was attempting to place a heavy round metal plate into a slot by hand. He released the plate with his right hand and his left middle fingertip received a bone fracture.,1
"While cleaning around an inspection table, an employee leaned on the table and suffered an open fracture to the left arm.",1
"An employee was fabricating wooden targets for a firing range. He was using a table saw with a 10"" blade when his left thumb and index and middle fingers contacted the blade, amputating two fingers.",0
"An employee was cleaning a battery-powered caulk gun with gasoline when the employee bumped the trigger. The gasoline then ignited the employee's shirt sleeve and pant leg, and the employee received burns on the right arm and upper right ankle.",1
"An employee was operating a joiner while wearing gloves when his glove was caught in the joiner. His finger was then pulled into the joiner, and his fingertip had to be surgically amputated.",1
An employee was shutting down a cotton gin and opened the metal cover for the lint cleaner. The belt or saw inside the lint cleaner partially amputated the employee's right index fingertip.,0
"An employee was sealing highway asphalt when he tripped, fell, and dropped a hot asphalt sealer can. The hot asphalt spilled on and burned his left hand, requiring hospitalization.",1
An employee was helping an elevator mechanic install an elevator when his left index finger was caught and amputated in the pulley.,1
"An employee was blowing zinc as pipe material was being raised from a kettle when the wire rope holding the pipe material broke. The material fell into the kettle, splashing zinc on the employee, who suffered second and third degree burns to the neck, arm, shoulder, and head. The employee was hospitalized.",1
"An employee was pushing a sanitation cart across the floor when a reversing forklift driver struck her, fracturing her ankle.",1
"An employee was pushing a small cart with boxes when the wheels of the cart became stuck on a drain cover. The employee pushed the cart with force and fell forward onto the concrete ground, suffering a concussion as well as head and body pain.",1
"An employee fell from a lift gate while talking on the phone, suffering a wrist injury.",1
"An employee was placing a wooden 2x4 between steel roadway grates when the employee's right hand was caught between two grates, fracturing two fingers and causing tendon damage and an amputation to the first knuckle of the right ring finger.",1
"An employee was pushing a 7-inch channel on a conveyor belt when his left hand was caught between the belt and the channel, amputating his middle fingernail.",0
"An employee was driving a forklift when the left fork hit a support beam, causing the employee to then hit the cage of the truck. He sustained three fractured vertebrae in his neck and a forehead gash.",1
An employee was driving a vehicle across a ramp when he backed into a wall and was hospitalized with a fractured neck and head lacerations.,1
"An employee was driving a pallet jack when he struck a floor grate, which caused the jack to stop abruptly. He was ejected and struck the floor of the debone cooler. He was hospitalized with a left hip fracture and abrasions to his left elbow.",1
"Two employees were moving 40-foot long pipes (30 inches in diameter and weighing over 1,000 lbs.) on an elevated pipe rack into the pipe coating facility. While moving the last pipe, one employee's right hand was caught between a stationary pipe and the moving pipe, partially amputating his right ring fingertip and avulsing his right long fingernail with a nailbed laceration. He was hospitalized overnight.",1
"An employee was putting up stock in the produce cooler when he tripped on a box on the floor. He slipped and fell, hitting his head on a sink and his hip on the floor. He suffered a hip fracture, intracranial injury, sprain, strain, and dislocation.",1
"An employee was working on an engine sub-line when he activated the two-hand control. The engine pallet then lowered onto his right thumb, crushing it. His right thumb broke, requiring surgical amputation and hospitalization.",1
An employee was driving a forklift  from a dock onto a truck trailer when the truck trailer began to pull away. The forklift fell from the dock to the ground and landed in an upright position. The employee suffered a broken rib and vertebra.,1
"An employee was using a 10 lb. sledgehammer to secure pins to a metal form. As he was striking the last pin, the sledgehammer struck the small digit on his left hand, removing his fingernail and amputating the tip.",0
"An employee was loading a truck with pipe. When he removed a support that was holding the tier of pipes in position, one of the pipes fell and hit his left leg. His leg broke and required surgery.",1
An employee was pulling pallets with a powered pallet jack when his legs were caught between the pallet jack he was operating and another stationary pallet jack that was behind him. He suffered lacerations to his lower left leg and ankle.,1
"An employee was reversing a forklift when he struck a metal rack. His hand was caught between the forklift and the rack, causing an amputation.",1
"An employee was cutting a bag liner to relieve the water pressure when the bag filled with hot water and ruptured. The hot water covered the employee, causing second degree burns to 40 percent of his body.",1
An employee was operating a small pieces folding machine when the employee's hand was caught and degloved in the machine.,1
"An employee fell from a picker to the ground, injuring his head and back.",1
"On October 25, 2017, an employee suffered a tuft fracture/amputation to the right thumb while attempting to re-feed the bag making machine. The machine was guarded at the time.",0
"An employee was trying to move a barrel back onto a forklift when the pallet broke. The barrel then shifted, pinching the employee's finger between the barrel and the forklift mast. The employee's fingertip was amputated.",0
"An employee was exiting her vehicle to go into the office when she tripped on a parking stop and fell to the ground, breaking her collarbone.",1
"An employee was on top of a trailer tarping a load. As he was stepping down, his right foot was caught in the plastic tarp. He tripped and fell off the top of the load, landing on the ground and suffering an open distal radius fracture with radiocarpal dislocation and an L2 compression fracture.",1
"An employee was cleaning a mixing tank and spraying water inside the tank when the water pressure hit the tank lid. The lid then fell and struck the employee's right hand, partially amputating the middle fingertip.",1
Employees were troubleshooting an elevator. The injured employee opened the overhead hatch and climbed halfway out onto the ladder to attempt to toggle some switches. Another employee hit the up arrow and the elevator moved crushing the injured employee's right arm between the ladder and the elevator resulting in a fractured and punctured arm. The interlock switch was damaged and did not work allowing the elevator to move with the overhead hatch open.,1
"An employee was emptying a self-tipping dumpster that was attached to the forks of a forklift. He tilted the forks forward to help facilitate the dumping of the dumpster. He then got out of the cab of the forklift, walked to the side of the forklift mast, and placed his left hand on the lower portion of the mast. He reached up with his right hand and disengaged the release lever on the back of the self-tipping dumpster, causing the dumpster to quickly shift forward. The resulting shift in weight of the dumpster caused the forklift forks to swing back into the mast, pinching the employee's ring finger between the forks and mast. The tip of his ring finger digit was amputated.",0
"An employee was standing in front of a palletizer when she was struck by a forklift, injuring both ankles and both feet. She then fell and lacerated the back of her head.",1
"An employee lost his balance while sitting on a stool and fell to the ground, suffering a head injury.",1
"An employee opened a secure cover on a still after a Clean-In-Place (CIP) wash and was splashed with a hot mix of water, detergent and Alkali LF 257. The employee suffered burns to the upper torso.",1
"An employee was working a trail on an all terrain vehicle (ATV) when he hit a ditch. The ATV flipped over and landed on him, breaking his arm. He was hospitalized.",1
"An employee was cutting bailing wire off a bail of corrugated cardboard when the wire released from the bail under tension and struck the employee's head, penetrating the skull.",1
"An employee was servicing a boiler. After being notified that the boiler system had been depressurized, he removed a plug from a valve on the boiler. Hot sea water then hit him, causing second degree burns to his right arm, right shoulder, neck, and chest.",1
"An employee was on a work platform helping a coworker weld a brace in place on a structure when the platform tipped. He lost his balance and then fell approximately 10 feet, suffering a liver laceration, minor concussion, and broken wrist.",1
"An employee fell 20 feet while supervising employees installing a ridge cap on a metal building, fracturing his left hip and right elbow.",1
"An employee was working on a ladder when it slipped. The employee then fell to the ground, suffering a left shoulder injury. The ladder was unsecured at the time.",1
"An employee fell approximately 7 feet to the ground while descending a fixed ladder from a roof, fracturing the left leg.",1
"An employee was cleaning the bottom drawer of the stove when she squatted and lost her balance, falling backwards. She put both hands out to prevent the fall and fractured both wrists.",1
An employee tripped over a cable tray on the floor and suffered a hip fracture.,1
"An employee was inspecting work performed during the construction of a water tower. He was trying to remove a manhole cover when it slid off his hand and caught his left index finger, partially amputating his fingertip.",0
"An employee fell 20 feet off a roof while installing fiber optic cabling, suffering two fractured hips, a broken collarbone, and multiple other broken bones. The employee was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee was doing maintenance on a conveyor system when his right hand was caught in the conveyor, partially amputating his middle finger.",0
"An employee was rigging a flow line on a crane when the pipe became stuck. The employee approached the flow line to check it when it unexpectedly came loose and struck him in the chest, breaking four ribs.",1
"An employee was drilling holes in a metal angle piece when the metal angle slipped and his glove became wrapped up in the drill bit, severing a finger.",1
An employee slipped on a piece of broken paver and fell forward into a stack of pavers while attempting to catch himself. His fingertip broke and had to be surgically amputated.,0
"An employee was sheeting a roof on a single-story residence when the wind caught the sheeting. He then lost his balance and fell approximately 10 feet to the ground, breaking his wrist and suffering a concussion.",1
An employee was using a shovel to remove sod when the shovel hit an underground powerline. The employee received an electrical shock.,1
"An employee was walking through the shop area when he stepped out from between large molds in front of a forklift. The forklift then ran over his feet, breaking toes on and lacerating both feet. He had surgery.",1
An employee was standing in an area waiting for a crane to put an H-beam in place when the H-beam struck and broke the employee's right leg.,1
"An employee was picking up a box of raw chicken weighing approximately 40 pounds when she felt a pop in her back. She suffered bulging back discs and a torn ligament, requiring hospitalization.",1
"Two employees were viewing part of a conveyor line that had malfunctioned earlier. One employee gestured toward the conveyor system with his left hand. While stepping toward the system, he lost his balance. He attempted to steady himself on the conveyor frame, but his left hand slipped too far into the conveyor. The tabletop caught his gloved hand and pulled it into the transfer conveyor, partially amputating his left middle and ring fingertips.",0
"An employee was standing on a chair attempting to open a deli side door when the chair tipped over. She fell and broke her left leg, requiring hospitalization.",1
"An employee was working on a batter mixer pump when the employee's hand slipped into the machine's operating grinder, amputating the middle finger above the middle knuckle and the ring finger at the bottom of the fingernail.",0
"On October 26, 2017, at approximately 5:20 p.m., two employees were riding an RTV on the road. While turning left, the RTV was struck by a car. The injured employee was thrown from the passenger seat and struck his head on the ground, suffering a head injury and arterial bleeding in the brain. He was hospitalized and had surgery.",1
"On October 26, 2017, at approximately 6:00 PM, an employee was operating a sit-down rider forklift truck. While traveling in reverse, he placed his right hand on the support beam of the forklift's overhead guard. His right pinky finger was then caught and crushed between this support beam and the metal counterweight or bumper of a large wheel loader. His right little pinky finger was amputated, and he was hospitalized.",1
"An employee was using a crescent wrench to release a concrete riser from a mold when his fingers became pinched between the concrete riser and mold when the concrete riser released. His middle finger was degloved, and his ring fingertip was crushed.",1
"While changing out tooling at a press welder, an employee hit the pedal that activated the machine, resulting in a left pinky finger amputation.",1
"On October 26, 2017, at about 7:30 a.m., an employee was bent on the ground popping a chalk line when a scissor lift struck the employee. The employee suffered a broken right femur.",1
"An employee was painting a wall on a step ladder, lost his balance and fell several feet resulting in a fractured right heel and left ankle.",1
"An employee was removing the barrel from a fire hydrant. As he removed the barrel, a pinch point was created. His left ring finger was caught in the pinch point, amputating his fingertip.",1
"An employee was participating in a training exercise when he became ill, requiring hospitalization for dehydration.",1
"An employee was resealing a control valve on a loader. He tipped the loader bucket and secured it into the ground, so he could access the valve. He then relieved the hydraulic pressure from the lines, but one of the lines still had pressure in it. The line blew fluid and released the loader arms, which came down and trapped the employee between the arms and the bucket linkage, fracturing his ribs.",1
"An employee was cutting a steel coil using a 5-foot long torch. When he got to the last section of the cut, the coil broke open and struck his left side (elbow and torso). He suffered bruising and a potential internal injury.",1
"An employee was inside a robotic area attempting to retrieve a bag that had fallen off a pallet when he tripped a sensor that triggered a conveyor to start. He rode the conveyor line, but when that conveyor ended and another began, his right foot was caught between the two belts. He suffered cuts to his knee and a laceration to his finger when he pulled his foot out of the conveyor.",1
"An employee was standing on top of a rig taking pictures of the trailer when the employee stepped backward and fell into a gap between two grid plates, breaking the left leg.",1
"On 10/26/2017, an employee was driving a walk/ride truck to load ice cream onto a trailer. The employee was traveling north toward a freezer doorway while a second employee operating a standup forklift was traveling westbound to the freezer. The trucks collided at an intersection, causing the first employee to fall to the floor. The employee suffered a fractured right femur and dislocated right ankle, requiring surgery and hospitalization.",1
An employee was checking out a customer at the front of the store when a vehicle drove into the store and hit the employee. The employee was hospitalized.,1
"An employee was delivering an A-frame from the back of a truck when he lost his grip on the A-frame and fell from the truck to the parking lot, breaking ribs and injuring his spleen and lungs.",1
"On October 26, 2017, an employee was moving metal stock into a beveller machine when the employee's left middle finger was pinched and crushed between the metal stock and the machine guard.",1
"An employee was operating a cold former and placed his hand between the wire and drum. His second, third, and forth fingertips on his right hand were amputated.",0
"An employee was mopping the floor and lost her footing. She fell to the floor, fracturing her right upper arm and left hand.",1
An employee fell down stairs while at work.,1
"An employee was attempting to lift and level a jammed loading dock leveling plate when his right index finger was caught between two sections of the dock plate and crushed at the hinged seam, amputating his fingertip.",0
"An employee was removing a finished load of washed laundry from a side-loaded industrial washing machine when the drum spun, catching the employee's shirt sleeve and dislocating the employee's left elbow.",1
"An employee was performing routine maintenance on a header machine when his left-hand fingers entered a hole in the machine. The machine arm then fell on his left-hand fingers, amputating the index finger.",0
"An employee climbed a ladder to put foam on a window. He was stepping onto a 2"" x 4"" that was on the edge of the window when the board slipped and he fell 20 feet to the ground. He broke seven ribs and possibly an arm.",1
"An employee was repairing a hydraulic cylinder on a forklift when his foot engaged the tilt for the forklift mast. He was then crushed between the forklift cage and the mast, suffering multiple rib fractures and requiring hospitalization.",1
An employee was performing maintenance on a conveyor belt when his right forearm became caught and fractured in the conveyor.,1
An employee was slicing beef ribs with a band saw when his right thumb was caught and amputated in the saw.,0
An employee was on a forklift chiseling built-up material from the dust collector ducts when a bolt on the brackets holding the duct work broke. The metal duct hood fell and lacerated the employee's right leg.,1
Employees were testing a pipe fitting machine they had just installed when a pipe began to fall. The injured employee was trying to catch the pipe when it amputated the employee's right middle fingertip.,0
"An employee was mounting a car tire to a rim when his right index finger was caught between the tire, the rim, and a duck face component while the tire was rotating. His right index fingertip was removed leaving the bone exposed.",1
"An employee was prepping food and sharpening a knife when the knife slipped from his hand and cut the top of his right middle finger, amputating it.",0
"An employee was caught between a roll-up truck and a trash container, suffering a broken right leg.",1
An employee was walking in an aisleway that was being stocked by an outside vendor when the vendor bumped and knocked the employee to the ground. The employee suffered a broken pelvis and was hospitalized.,1
"An employee was stepping down from a 6-ft. ladder and missed the last step, tearing tendons in both knees.",1
An employee was in the rear of the dairy truck unloading product when he fell backwards out of the side door to the ground below. The employee sustained broken ribs and a hairline fracture of the skull.,1
An employee fell 12 to 15 feet from a ladder to the ground below and hit his head on a drain pipe. The employee lost consciousness and had a cracked rib.,1
An employee was cutting a piece of aluminum strut into smaller pieces using a chop saw. A piece got stuck in the saw and the employee's left pinky finger was amputated.,0
"An employee was blending a seasoning product when some of the product became blocked. He opened the blender lid and used a tool to loosen the product. The tool pushed unexpectedly to the bottom of the blender, and his right pinky fingertip was caught between the handle of the tool and the vane of the blender. His right pinky finger was smashed.",1
"On October 27, 2017, at approximately 2:45 p.m., an employee was adjusting the forks of a lift. While holding onto the side of the forklift assembly, he boomed up and kicked the fork over with his foot. As the fork moved, it dropped into place, along with the bar that supports the forks. The employee's gloved finger was then pinched between the fork and fork assembly, amputating his right middle fingertip.",0
"An employee was checking on a pipe in the bathroom and the pipe broke, causing hot water to come out and burn his arms and chest.",1
"While operating a brake press, an employee's right hand was caught in the press and three fingers were amputated.",1
"An employee was performing a change-over function on a machine when his index finger made contact with the machine, partially amputating his fingertip.",0
An employee stepped off of a two-step ladder onto a box and fell breaking her left hip.,1
An employee was caught in the overflow and sustained a broken left arm.,1
"An employee was positioned between a skidder and a forklift when the skidder backed up and pinned the employee between the two pieces of equipment. The employee was hospitalized with broken ribs, a punctured lung, a ruptured spleen, and a liver laceration.",1
"An employee was working with a hammer to remove wall ties when a drill was dropped from the next level up, striking him on his hard hat and causing neck and shoulder injuries.",1
An employee was manually lowering a lift gate on a 5th wheel trailer. Other members of the team removed a camera arm from the trailer. The injured employee then bent down to remove wheel chocks and the camera arm struck him on the head resulting in a compression injury to the upper neck (C2-C5).,1
"While changing a split-rim tire on a grader, the rim blew up and an employee sustained arm and chest injuries.",1
"An employee was working from a scaffold and fell approximately three feet, sustaining a head injury that required surgery.",1
An employee was descending a railcar and fell approximately 12 feet. His PFAS was not anchored at the time. The employee was hospitalized for head trauma.,1
An employee had been running a concrete meter box machine. His right forearm was broken when a metal press fell on it.,1
"While walking, an employee side-stepped and fell, breaking his leg.",1
"An employee walked around a mobile crane and was inspecting it when a crane operator climbed into the crane cab. While entering the cab, the operator grabbed the steering wheel, causing the crane's wheels to swivel. The employee inspecting the crane was pinched between the swiveling wheel and a crane outrigger, suffering seven broken ribs, a broken pelvis, and a broken wrist. The employee was hospitalized.",1
"An employee was operating a soil boring tool and lifting it out of a 36-inch deep trench. As he was preparing to place the tool on the ground, he lost his grip on it. The tool dropped to the ground, and his left middle finger was caught between the falling tool and the concrete sidewalk, amputating his fingertip.",0
"An employee was feeding a military dog. The employee approached the kennel, placed the pan on the floor, and unlatched the gate to allow the military dog to come out to eat. Before the employee could get the gate closed, the military dog bypassed the gate and bit the employee on the left side of the abdomen, right wrist, palm, and pinky finger, causing pressure bites, punctures, and multiple lacerations.",1
An employee reached into a recycling machine to clear a jam and suffered lacerations and fractures to two fingers and the thumb of the right hand. The machine was not locked out at the time.,1
"An employee was operating a pile driver. While connecting a vibrator to the pile, the pile was hit by the vibrator, causing the pile to fall into the cab of the pile driver, hitting the employee. The employee sustained a fractured left leg and three cracked ribs.",1
"While using a utility blade to cut thin plastic film that had collected near the vacuum tube, an employee amputated their left middle fingertip.",0
"An employee was driving an electric maintenance cart. While making a left turn, her leg hit a bollard, breaking it.",1
"An employee was removing a terminal strip on a motor control center and was injured by an electrical flash. The employee suffered burns to the face, ears and hands.",1
"While servicing a machine, an employee's finger became entangled and the tips of two fingers were amputated.",0
"On October 28, 2017, an employee was walking to a forklift when he tripped over the safety bumper, which is on the floor of the facility as a safety measure to separate forklift traffic from the pedestrian walkway. The employee fell to the floor and injured his right knee and left elbow.",1
A temporary employee was injured when his foot was caught between a riding pallet jack with long forks and a guard.,1
An employee attempted to steady a drum of vinegar that was being transported by forklift. The drum moved and crushed her fingertip between the drum and a fork of the forklift. The fingertip was amputated.,0
"An employee was on a scaffold connecting ductile iron pipe in a water treatment plant. The employee had to remove a side rail from the scaffold to gain access to the pipe. The employee lost his balance and fell approximately 15 feet onto pipes that were below. The employee sustained injury to their L1, L2, and L3 discs, which had to be fused.",1
"On October 28, 2017, an employee's left hand was caught in an ironworker machine, resulting in the partial amputation of the employee's middle and ring fingers.",0
An employee fell into an open-top treatment tank containing caustic liquid waste and sustained chemical burns on his whole body.,1
An employee was attempting to retrieve a broom that was dislodged inside a dump pit when a coworker started the belt for the bucket elevator. The belt caught and broke his left leg and foot.,1
An employee was cleaning the floor when the floor cleaning machine hit a sticky spot on the floor and jerked backwards knocking the employee down. The employee hit their head and was hospitalized.,1
"On October 28, 2017 at 12:40 p.m., an employee was operating a powered pallet jack; the employee hit a patch of water, the pallet jack slid and pinned the employee's foot in between the pallet jack and the wall, breaking the right ankle.",1
"An employee was changing the heads of tongs. The rig operator lost control of the power swivel and it struck the employee's leg, breaking it.",1
"On October 28, 2017, an employee was standing on a scaffold spray painting, when he leaned over the scaffold's top rail, lost his balance, and fell approximately 8 feet to the concrete floor. He suffered a skull fracture, broken collarbone, broken elbow, broken ribs, punctured lung, and broken ear drum.",1
An employee was pulling a cable for a tower operation when his right little finger was caught and amputated between the cable and a handrail.,0
"An employee was painting soffits from a 4-foot height when he lost his balance and attempted to correct his body position. He then fell into a yard hole that was covered over with leaves, breaking his tibia.",1
A maintenance employee was repairing a conveyor belt sheave on an offal pump. His right hand middle finger was caught when removing the belt resulting in amputation. The machine was locked out/tagged out at the time.,0
"A rig crew was tripping rod out of a hole. When the operations were complete, the derrick man removed the screw from the clevis that supports the safety transfer to clean it. The safety transfer then slipped from his hand and hit an employee that was standing on the rig floor on the head. The employee suffered a laceration and possible concussion.",1
An employee was checking voltage after restoring electrical power to a customer when an arc flash occurred causing second degree burns to the hands. The employee was admitted to the hospital.,1
An employee was on the raised dock taking out the trash when they slipped off the dock and contacted the ground. The employee bruised the side of their face and fractured their nose.,1
"On October 29, 2017, at approximately 10:30 a.m., an employee was delivering propane to a customer's home address. The employee was checking to be sure the furnace was on and the pilot was lit. When he went to light the pilot, the furnace exploded, causing burns to the employee's face and hands.",1
An employee fell into a floor opening filled with hot water and suffered burns to the right hand and both lower legs.,1
"An employee was getting ready to load a truck. He was behind the winch truck, pulling on the chain that goes to the winch, when the driver in the truck pulled the lever that moves the chain that goes to the winch. The chain and the tail roll of the trailer trapped the employee's finger causing a partial amputation of the right ring fingertip.",1
An employee was bitten on the right hand by a spider that was inside their glove. The employee was hospitalized due to infection.,1
"An employee's finger was caught between the chain and sprocket of the decoiler machine, resulting in the amputation of the first digit of the left index finger.",0
"An employee was travelling in a stand-up forklift when he came into contact with another parked forklift that no one was operating. His foot was outside the operator compartment at the time and was crushed, requiring surgical amputation.",0
"An employee was adjusting a corrugation machine's stacking section when he used a box-end wrench to loosen the bolts that hold the internal plate down. The machine then cycled, pinching his finger between the bracket (movable part) and frame (fixed part). He suffered a trans-phalangeal amputation of the right index finger. The machine was in auto mode at the time of the incident.",0
"An employee was operating a slick line truck to pull production tools out of an existing well. He was in the cab and the truck was stationary, when one of the slick line cables snapped under tension. The cable shot back into the cab of the truck and lacerated an artery in the employee's neck.",1
An employee tripped and fell onto a metal A/C duct causing a serious laceration to the right forearm between the wrist and elbow that resulted in surgery.,1
An employee was in the process of washing the floor when he was splashed on the legs by floor stripper which resulted in chemical burns and possible nerve damage.,1
"An employee was standing between pallet stacks of product, checking the product on the pallets. A rider pallet jack struck one of the stacks which then struck and fractured the lower right leg/ankle of the injured employee.",1
An employee's finger was in a pinch point while a van was being lowered onto a jig. The employee sustained the amputation of his left index fingertip.,0
An employee operating a powered industrial truck sustained foot and ankle injuries in a collision with the concrete wall.,1
An employee was loading a billet onto a roller that feeds an extruder when the billet became jammed. He was trying to unjam the billet when his right index finger was pinched by two billets. His finger had to be amputated.,1
An employee was standing on the back of a pickup truck when an unknown person jumped in the vehicle and drove off. The employee was ejected from the pickup truck and sustained severe head injuries after hitting the concrete road.,1
"At 6:00 PM, an employee was doing his normal set-up duties. To check for sand, he reached into the top of the magazine and the clamp came down on his finger resulting in a fingertip amputation.",0
An employee was cleaning a magnet while it was inside a metal dumpster. The magnet became attached to the side of the dumpster and caught the employees thumb resulting in a soft tissue amputation to the tip of the left thumb.,0
"On October 30, 2017 at approximately 6:10 a.m., a temporary employee sustained crushing injuries to the third and fourth fingers of his left hand when the powered industrial truck he was operating tipped over and his hand was caught between the cage of the vehicle and the floor.",1
An employee slipped on ice in the parking lot and suffered a broken ankle which required surgery.,1
An employee was traversing on deck when the dredging boat was involved in an accident. The employee suffered a broken nose.,1
An employee was up on a ladder working on an elevated fuel tank. The ladder tipped over and the employee fell to the ground and sustained three broken ribs.,1
"An employee operating a table saw hit his elbow on a finished part and his fingers went into the saw blade, resulting in the amputation of the left pointer fingertip.",1
"An employee was responding to a machine which was not functioning. The employee pulled the drive belt to move the mechanism and the equipment started, pinching and amputating the employee's right thumb between the belt and pulley.",1
An employee was removing the crane hoisting straps from an installed wooden beam when he fell approximately 20 ft. from a mobile scaffold to the ground. The employee sustained trauma to the face and right leg.,1
An employee was removing loose shingles and debris from the corner of a roof when debris shifted underneath him causing him to fall 30 feet to the ground. He was admitted to the hospital with a broken left forearm.,1
An employee was cleaning the scrap return machine blades. The mechanism cycled and the blade amputated the middle fingertip.,0
"An employee was cutting wood on the table saw and made contact with the saw blade, resulting in an amputation to his right ring and middle finger. The machine was not guarded at the time.",0
An employee was out on a playground with students when one ran into her and knocked her down. She broke her right arm and required hospitalization and surgery.,1
"An employee was disconnecting old wiring in an attic when the employee stepped onto a false board meant for drywall support and fell 12 feet through the ceiling to the floor, suffering a back injury.",1
An employee fell at work and fractured her hip.,1
"An employee slipped on ice and fell to the concrete floor, fracturing the right femur and requiring hospitalization.",1
"An employee got a bucket of hot water to clean the floor when the hot water contacted his hand (no injury). He then dropped the bucket, and the water splashed onto the back side of the injured employee, who suffered a second degree burn and was hospitalized.",1
"An employee was working in the parking area of the yard when a truck came out of gear and started rolling. The employee was pinned between the rolling truck and a stationary truck, suffering internal injuries that required surgery and hospitalization.",1
"An employee was operating an overhead crane when he lost his footing, fell, and fractured multiple ribs.",1
An employee was putting stickers on a window and fell approximately six feet from an A-Frame ladder resulting in a fractured right femur and a laceration on the right arm.,1
"On October 30, 2017, an employee was carrying/placing some boxes near a dock door when a forklift operator reversed out of a semi-trailer and drove over the employee's left foot, crushing and fracturing the employee's left foot/big toe.",1
An employee was using a router to groove the end of a piece of flooring when the router cut and amputated his right pinky finger. The router was guarded at the time.,0
"An employee parked his tractor trailer and was exiting it when he lost his footing and fell to the concrete floor, breaking his hip.",1
An employee was moving cattle to load and/or unload a trailer when the trailer gate struck the employee's face. The employee suffered a broken jaw and was hospitalized.,1
"An employee was coming down from the flatbed of a truck when he lost his balance and fell from the bottom step of the flatbed. He fell approximately 2 ft. and hit his head on the ground, sustaining injuries to the head.",1
An employee was unloading material from a semi-truck when the truck rolled back and pinned him. He suffered a collapsed lung.,1
An employee was cutting metal pipe with a portable saw. The saw kicked back and the handle struck the employee on the lower lip and chin.,1
"A crew was removing trees from a drainage swale using chainsaws and a small excavator. The excavator was moving a tree limb when one end of the limb became stuck in the ground. As the excavator advanced, the limb bent until it suddenly released, springing forward and striking two employees. One of the employees was struck in the leg, requiring hospitalization and possible surgery.",1
An employee operating a powered industrial vehicle stopped and leaned out of the operating compartment to scan a product with a scan gun. Her left hand made contact with the truck's operating controls which caused it to move. She sustained a partial amputation to her left finger.,0
An employee's fingertip was amputated by the internal auger of a chocolate tempering unit.,0
"An employee was adjusting Teflon and the machine shut down, amputating a fingertip.",1
"On October 31, 2017, an employee loaded a car onto a trailer, stepped out of the car, and was walking toward the trailer's ladder when the employee fell approximately 6 feet to the ground, fracturing a wrist and rib.",1
An employee was cleaning out the drum inside a cement truck's collection hopper when his hand was caught by the blade inside the drum. He suffered hand and finger injuries. The hopper was guarded at the time of the incident.,1
"An employee stepped off the back of a waste collection truck to collect refuse when an SUV ran over the bridge of his right foot, breaking two bones. He was hospitalized.",1
"An employee was operating a motorized pallet jack when his left ankle was caught between the pallet jack and the wall. His left ankle or foot broke, requiring hospitalization.",1
"Employees were erecting a large tent. The first column bent was put in place using a forklift. Once the column bent was released from the forklift, the column bent fell and struck the injured employee who was on all fours resulting in non-displaced fractured lower vertebrae, broken ribs and head injuries.",1
"An employee was nailing shingles on a roof using a nail gun when the nail gun hose became caught. When the employee went to nail the shingle, the nail gun pulled back and the nail shot into his right knee.",1
"An employee was using a pallet jack to transport a pallet of food when he collided with another pallet jack operator. His right ankle was pinned and fractured between a rack and the pallet jack, requiring hospitalization.",1
"An employee was walking in the lower level of a building while other employees were removing a section of temporary office wall. Wall debris fell and struck the employee, who suffered fractures to the upper and lower left leg.",1
"An employee fell down 12 to 15 stairs while walking, hitting the floor and suffering head trauma.",1
"An employee was loading cargo flat racks onto a barge when his fingers entered the 1-inch gap between the racks and a spreader bar. The flat rack came to rest on the barge, and the spreader bar continued downward and crushed his pointer and middle fingers. His fingers were later medically amputated.",0
"An employee was operating a garbage truck when his hand was crushed in the truck blade, breaking a finger.",1
An employee was palletizing bags of salt. He was attempting to move a bag that was stuck on a conveyor belt when his right forearm was caught and crushed between two rotating pieces of equipment on the belt. He suffered skin damage that required surgery.,1
An employee was repairing a scale on a forklift. He then lifted the scale with another forklift and was removing its brackets when the scale fell and pinned his finger between it and the floor. His finger was partially amputated.,0
An employee became caught/entangled in rigging equipment during crane lift operations. The employee was hoisted approximately 40 feet before falling and breaking his tibia.,1
"An employee was removing a guardrail post. His hand was on a 16-inch bolt when a piece of equipment began to remove it. The bolt bent on his index finger, which had to be amputated to the knuckle.",0
"An employee was operating a heavy-duty tractor truck on the upper ramp of a vessel deck. When the truck was halfway up the ramp, it started to roll down the ramp and went in the air on its rear tires before coming down. The employee suffered a pelvic fracture and dislocated hip.",1
"An employee was standing on an outrigger. He was accessing the super structure of the outrigger when he fell approximately 9 feet to the ground, fracturing his right shoulder and detaching a shoulder muscle.",1
An employee was loading a parked trailer using a forklift when the trailer began to drive off. The forklift with the employee rolled off the trailer and landed on its back side. He suffered spinal injuries and was hospitalized.,1
"An employee was helping to assemble telescoping boom sections. Another employee was using a forklift to push the sections of the boom together. During this operation, the injured employee's right hand was inside the boom section to lift up and dislodge the chain, which had become caught on the outer boom. The employee's right middle finger was then caught between the gear and the chain, resulting in an amputation.",1
"An employee climbed a mounted ladder on a semi-trailer to fill the generator on top of the trailer. He was trying to pull a fitting loose when he lost his balance and fell off of the ladder (height of 6 feet) to the ground, suffering fractured ribs and a concussion.",1
"An employee was threading banding over the top of a coil and passing it between the coil and coil car when the turnstile moved. The employee's hand was then caught between the coil car and coil, smashing the hand and wrist and fracturing a finger.",1
An employee was attempting to pull paper from a clicker press when another employee energized the machine. The employee's right middle and ring fingertips were then caught in the press. Both fingertips were amputated.,0
"A team was dismantling a machine for refurbishing in a specific order: extruder, core barrel, base plate, and carriage. The injured employee was holding the carriage as it was being lifted when the whole assembly rolled forward. The employee's right index finger was then caught and amputated between the extruder deck and extruder base.",0
"An employee was working on a building roof when he fell through a weak area of the roof and hit the ground, injuring his tailbone. Fall protection was not worn at the time.",1
"On October 31, 2017, an employee was attempting to clear corn stalks from a combine because the retrofitted blower was not working correctly. The employee's right hand was inside the combine when the still-rotating chopper blades amputated it.",0
An employee was standing on an extension ladder power-washing a water tank when he fell and fractured his tailbone.,1
"Two employees were removing ball valves. When the employees began to install the gaskets, a flash fire occurred. One employee suffered burns to the face.",1
"An employee was removing plastic trays from the back bed area of a field truck when the truck driver moved the vehicle forward. The employee lost his balance and fell to the ground on his back, fracturing a vertebra.",1
An employee was moving steel reinforcing rods and associated supports with a skid steer when one of the employee's right-hand fingers was caught and crushed between a steel rod and the skid steer's grapple arm.,1
"An employee was training at a computer when she stood up, turned, and tripped over her feet. She then fell to the ground, breaking her right femur.",1
"On 10/31/2017, an employee was installing a new belt on an industrial washer. The employee had energized the industrial washer to adjust the belt's tightness and alignment when his right hand was caught in the ingoing nip point of the belt and pulley, injuring his hand and amputating four fingers.",0
An employee was moving a mortality from a farm using a tractor. The employee pulled in toward the pad and backed up the tractor. The tractor bucket became caught on the gate. The employee exited the tractor and was attempting to disengage the bucket when the tractor rolled forward and pinned the employee's right leg between the bucket and gate. The employee's right lower leg broke. The tractor was not shut down and the brakes were not set at the time of the incident.,1
An employee was walking over a conveyor track for cars when his left foot slipped and went into the track crushing his foot and requiring hospitalization.,1
An employee was replacing a heater band when he received an electrical shock and burns to his arm.,1
"An employee was trying to remove a pecan that was under a conveyor belt leading to a soak machine when his left middle finger was caught underneath the conveyor belt's chain, partially amputating his fingertip.",0
"An employee's thumb was caught in an indexing chain, amputating the tip.",0
"An employee was ripping a piece of synthetic board on a table saw when his left hand contacted the circular saw blade, amputating his pinky and ring fingertips.",1
"An employee was in a tree trimming a branch with a hand saw when he leaned on another branch that broke, allowing him to fall approximately 10 feet to the ground. He injured his back and lungs. Fall protection was not worn at the time.",1
"Employees were laying rebar when a gust of wind rolled an unsecured vapor barrier around three of the employees, causing them to fall to the ground. One of the employee's suffered a skull fracture and required hospitalization.",1
"An employee was drilling a piece of metal when a part became stuck. When it came loose, it pulled the employee's glove and arm into the drill press. The employee suffered a broken arm.",1
"An employee was operating a plastics extrusion machine when a pressure buildup due to temperature differences in the plastic material caused a release of liquid plastic. The liquid plastic contacted the employee between a seam in the employee's PPE glove and protective garment (sleeve), burning the left forearm and hand. The employee was hospitalized.",1
An employee was using shears to strip wires when the shear slipped and stabbed his left index finger.,1
"On November 01, 2017, at approximately 3:45 p.m., an employee was helping to unload materials at a receiving dock. The employee was next to a pallet of columns measuring approximately 10 feet long and approximately 6 feet high. A forklift operator was on the opposite side of the columns and manipulating them when the pallet and columns tipped over, causing the employee to fall between the trailer and a guard system. He hit the concrete approximately 4 feet below, fracturing his neck and back.",1
"An employee was picking orders using a standup counterbalance electric forklift when she made a sharp right turn and hit a pallet rack, fracturing her pelvis.",1
"On November 1, 2017, an employee was admitted to the hospital due to a reaction to a flu shot.",1
An employee slipped on a toy that had wheels and fell on her right knee fracturing it.,1
"An employee fell from a ladder while installing insulation, fracturing a thumb and requiring overnight hospitalization.",1
An employee scraped his right wrist on a cylinder head while working on a vehicle. The scrape became infected and required hospitalization.,1
"An employee was closing the lift gate of a delivery truck when the employee's finger was caught between the lift gate and the truck bumper, amputating the fingertip.",0
"A crew of employees were tarping a haystack. A gust of wind caught and lifted the tarp and an employee, causing him to fall to the concrete ground and hit his head.",1
An employee was either riding an automated crane and fell off or was just trying to get away from an automated crane when the employee was pinched between the automated crane and square metal tubing on which retrievals were sitting. The employee suffered a fractured rib and required hospitalization.,1
"An employee was stepping off a tractor, missed the last step and fell onto their hip breaking it. The employee was hospitalized.",1
An employee was removing parts from a fixture and shelving and fell from a four-foot ladder resulting in a right femur fracture and a fractured left wrist.,1
"An employee was walking in an assembly building. 
A steel cover plate covering a one-foot channel, which runs the length of the building, was raised about two millimeters above the floor surface. The employee's foot became caught on the steel plate, causing the employee to fall on the left arm and shoulder. The employee suffered a fractured left humerus.",1
"An employee was putting together some equipment for startup when the employee's right index finger was pinched between a plate and a heat exchanger, amputating the fingertip.",0
An employee was attempting to remove frozen meat from a meat grinder's frame when the grinder/extruder partially amputated his index finger. The meat grinder was unguarded and running at the time.,1
"An employee was adjusting the rollers of a bar straightener and feeding a short bar through the machine when the employee attempted to grab material that was becoming deformed. The employee's left hand was caught in the machine, amputating the index finger to the first knuckle.",1
"An employee was walking across a dock in the cold storage area when a reach truck contacted his left foot, resulting in a partial amputation of his big toe.",0
The injured employee was manually pushing a sheeter machine with another employee and pinched a finger between the sheeter machine and a heat tunnel machine during a turn resulting in amputation of the left middle fingertip with nail bed repair.,0
"An employee was operating a 4-wheeler while moving cattle in the feedlot. The 4-wheelers have governors installed that limit speed to a maximum of 15 mph. Another employee on a 4-wheeler came upon the injured employee, who was sitting on his 4-wheeler, seemingly dazed. He was hospitalized with a skull fracture and bleeding in the brain.",1
"An employee was driving an unloaded stand-up forklift down a ramp from the upper section to the lower section of a warehouse when the employee lost control of the forklift and hit the safety railing. The safety railing entered the cab area and hit the employee in the pelvis, fracturing it.",1
A battery slid and crushed an employee's fingertip resulting in an amputation injury.,0
"An employee tripped while descending a flight of stairs, breaking an ankle.",1
"An employee was operating a small plate roller when the employee's left hand became caught between the top of the plate and the bottom of the top roller, crushing the thumb. The employee was hospitalized.",1
"An employee was filing documents when she tripped over a step stool and fell on her side, suffering multiple pelvic fractures. She was hospitalized.",1
"An employee had placed a gas-operated carpet cleaning machine in the garage of a vacant home, left the door between the garage and the living area open, and proceeded to clean the carpet. The employee was then exposed to carbon monoxide fumes.",1
An employee was clearing a jam on a grinder hopper when a rotating component inside the hopper amputated the employee's middle finger. The hopper was not locked/tagged out at the time.,0
An employee was repairing a truck when a driveshaft fell and struck the employee's head.,1
"On November 1, 2017, at approximately 10:00 a.m., an employee was helping to move a 30-gallon drum from a broken pallet to another pallet. His gloved hand was underneath the drum as he was transferring it. When it rolled onto the new pallet, his finger was pinched between the bottom of the drum and the pallet. His right index fingertip was amputated.",0
"An employee was carrying a sheet of drywall when he knocked over a bucket of drywall compound, causing the contents to spill onto the floor. He then fell and struck the floor, fracturing his knee.",1
"An employee was walking alongside a trencher clearing rocks while installing a new sprinkler system. The trench gave way underneath the employee, causing his foot to slip into the trench. His foot was then caught by the trencher's rotating blade, and he suffered a broken right femur.",1
"On November 1, 2017, an employee was setting up a machine when his index finger became stuck under a safeguard. When he tried to pull it free, his fingertip was severed.",0
"While working in the factory/warehouse, an employee observed a trash truck that was dropping off a 20- to 30-yard roll-off dumpster. He noticed some pallets in the area that he thought needed to be moved and yelled at the driver to stop. The driver stopped, but only to release the chain to free the dumpster so it could be positioned. The driver did not hear the employee and proceeded to make the drop. The employee attempted to get up from the area but was struck by the dumpster. He was caught between the dumpster and the loading dock, fracturing his right tibia.",1
"An employee was positioning drill rods on a high, flat trailer when he lost his footing and fell to a lower level, breaking his arm and wrist. He was hospitalized.",1
An employee was adjusting a tool set on a punch press when it cycled and caught his left index finger.,0
"An employee was tensioning a cable between two posts when the tensioner released and the cable struck the employee's left ring finger, removing skin. The distal phalanx had to be surgically amputated.",0
"An employee was using a hand tool to dig beneath an underground electrical duct bank and expose a water main when the duct bank collapsed. The hand tool then contacted a live electrical line, resulting in an arc blast/arc flash. The employee suffered burns and was hospitalized.",1
An employee was soldering a pipe using gas when the gas tank exploded. The employee suffered burns and was hospitalized.,1
"Two steel beams were being set into place on dunnage. An employee was placing pads under the bearing points when a beam struck the employee's left wrist, fracturing it and requiring hospitalization.",1
An employee was cutting gates and risers off brass castings. The employee was operating a metal cutting saw when the blade separated and hit the employee's face shield. The impact caused the employee's safety glasses to hit and lacerate the employee above and below the eye on the right side of the face.,1
"An employee was struck by a trailer that was backing up to a dock door, breaking his femur.",1
"An employee was dismantling the scaffold, slipped on the stair tread and broke an ankle.",1
"An employee was on a ladder working on a gutter when the gutter hit him in the head. He then jumped off the ladder to the ground, breaking his heel.",1
"An employee was on a forklift, loading bricks into a hot furnace, when he was splashed with hot molten metal, suffering third degree burns to his arms.",1
"An employee was un-hooking a speaker motor box on a stage when the employee stood up, wobbled, and then fell approximately 5 feet off the stage to the ground. The employee suffered a fractured skull, broken collarbone, and eight broken ribs, requiring hospitalization.",1
"On November 2, 2017, at approximately 9:50 p.m., an employee was entering an airplane tail section while inspecting a depot. While climbing through the aircraft and stepping over ductwork, he pulled his upper groin, requiring hospitalization.",1
An employee was struck on the chest and face by a concrete pump truck hose when the pump operator started the pump.,1
"An employee was picking products in the warehouse while operating a stand-up tugger. While driving forward and turning into a main aisle, the employee was thrown from the tugger, suffering a broken hip.",1
"An employee was pressure testing a fire pump. As the pump was pressurized, a fitting blew off and struck him on the head.",1
"An employee was replacing the conveyor belt on a press and was attempting to line up the belt while another employee ran the conveyor on manual mode. The running belt then sliced his left ring finger, partially amputating it to the first knuckle.",0
"An employee was sweeping grain inside a bin when the employee stepped or slipped into an auger, suffering a left foot amputation.",0
"An employee was attempting to remove a piece of veneer that was plugging a drier infeed when the employee's glove and right hand were pulled into the chain and sprocket, amputating the ring fingertip.",0
"An employee was operating a mechanical power press. The press cycled while the employee was unloading a stamped part from the point of operation, causing an amputation to finger(s) on the employee's left hand.",0
"Two employees placed an electric pallet jack onto the back of a delivery truck. One employee got into the back of the truck and was operating the electric pallet jack; the injured employee was standing outside of the truck. The electric pallet jack was locked in place, and the employee in the back of the truck was moving materials around manually. The electric pallet jack started rolling toward the back end of the truck. The injured employee went to grab it to prevent it from falling out of the truck. The injured employee's right pinky finger was then caught between the rolling electric pallet jack and the side of the truck. He suffered a right pinky fingertip amputation.",0
An employee was assembling a log splitter. He was putting on a sling choker for a log splitter beam when another beam rolled forward and severely cut and crushed his right finger between the two beams. The last digit of his right finger was amputated.,1
"An employee was closing the door of an aircraft when it closed on his right pinky finger, amputating it just past the last knuckle.",0
An employee was working from an aerial lift basket installing conduit tabs on structural steel when the employee was caught between a structural steel beam and the control panel of the lift. The employee suffered facial fractures and was hospitalized.,1
"On 11/2/17, an employee was driving a stringing truck that was carrying two joints of pipe when the truck struck a guardrail, causing the truck to rollover.  The operator was hospitalized with fractured vertebrae, a fractured nose and a fractured occipital bone.",1
An employee was using a cutting wheel to cut grate when it kicked back and sliced the employee's right knee open. The employee needed surgery and was hospitalized.,1
An employee was assembling HVAC filters and was bitten on the right forearm by a spider or bug causing an allergic reaction.,1
"While towing equipment, an employee was crushed between a tug and GPU equipment, suffering a fractured leg.",1
"An employee loaded a ladder into the back of a truck. Other equipment was preventing the ladder from laying flat in the bed of the truck. 
He entered the bed of the truck, rearranged the items, and positioned the ladder to set down in the truck bed. When he went to exit the truck bed, he placed one foot between the ladder and the inside of the truck bed wall, while the other foot was on the bumper of the truck. The tailgate was closed at the time. When he attempted to take his foot out of the bed, his foot became caught, causing him to fall from the bumper and truck bed. He broke his right femur.",1
"An employee stopped at a gas station to get gas. She fell and struck her head near the gas pumps, suffering head trauma.",1
"An employee was assessing roof damage. She put a ladder on a slippery deck and was climbing the ladder when it kicked out. She then fell to the deck, breaking her pelvis.",1
An employee was cleaning a machine while a mechanic was adjusting the center shaft. The collar came down and pinned the employee's left index finger causing a fingertip amputation.,1
"An employee was operating a burn machine when he noticed the guide that lines up the metal was still in the machine. He was attempting to remove it when the head of the machine caught his finger between the head and guide, amputating his left pinky fingertip.",0
"An employee was on-site performing scheduled preventative maintenance tasks in the building. He was attempting to break a pipe union on an external rear blow-down line to check it for obstructions when scalding water spontaneously released from inside the boiler and exited the pipe cleanout port, which had its cap removed. He sustained first, second, and third degree burns on his legs, the right side of his torso, and his right arm.",1
An employee had been cleaning an area near a conveyor. His left foot was resting on the frame of the conveyor when his left leg was pulled into the frame by a pulley or shaft.,1
"An employee was sweeping the warehouse floor when a reversing forklift struck his right leg, lacerating and contusing his shin.",1
An employee was unwrapping a wire rope from a spool when the wire rope slipped and pinched his left middle fingertip between the rope and spool. His fingertip was amputated.,1
An employee fell from a scissor lift while painting a ceiling and broke his hip.,1
"An employee was picking up trash when he stumbled into an unguarded pumping unit and was struck by the horse head, suffering pelvic, sternum, and rib fractures.",1
"An employee was inspecting a foundation when he tripped over the string line surrounding the foundation layout, fracturing his right leg and requiring hospitalization.",1
"On 11/3/2017, an employee was responding to a call about a leaking pipe in the hot wash area of the harvest floor. He suspected a pump and a leaking 2"" stainless pipe as being the cause of the leak. He took the pump apart to repair it, then reattached the pipe clamp to the pipe. Two other employees held the pipe in place for it to be reattached. Once the pipe was in place, one of the other employees went over to the panel and found that the water was still on; only the pump was turned off.  When the pump was turned on, the sanitary fitting broke and hot water with a temperature of approximately 170 degrees sprayed the employee’s arms, legs, and stomach. He received first and second degree burns on his arms and legs.",1
"On November 3, 2017, an employee was rip sawing a board when it kicked back and amputated the employee's fingertip.",0
An employee was reaching over a surgical tray and punctured an artery in the right forearm on a scalpel.,1
"An employee was in a manhole, getting ready to set a pipe. As the pipe was being lowered into the manhole, it slipped from its chain and struck the employee. The employee suffered a head concussion, broken hip, and broken elbow, requiring hospitalization.",1
"An employee was unloading a material storage cabinet on wheels when the cabinet fell over and landed on the employee's leg, breaking the femur.",1
"An employee was installing a ladder safety system onto the top of a ladder when the ladder davit fabrication slipped and hit his finger. His finger was caught in a pinch point between the davit fabrication and t-cage steel, amputating his fingertip and causing an open fracture to the finger (partway up the nail).",0
An employee was stepping over a 3-foot beam. He got one leg over when the foot on his second leg became hung up on a flange. He then fell approximately 3 feet onto scaffolding and fractured his right kneecap.,1
An employee's fingertip was amputated by a manual office paper cutter.,0
An employee was working on a truck turbo. The intake for the turbo was removed and a wire was sucked into the turbo. The employee tried to grab the wire and his fingers entered the turbo. His middle fingertip was amputated and his ring finger broke.,0
"An employee was removing a steam fitting from a pipe when steam released and burned the employee. The employee sustained second degree burns to both hands and first degree burns to the right ear and abdomen, requiring hospitalization.",1
An employee was unloading a 300-pound concrete bucket using a hand truck when the employee lost balance and fell backwards. The bucket then fell on the employee's stomach. The employee suffered head and internal organ injuries.,1
"On November 3, 2017, an employee was cleaning up the dock area at the end of a shift. The employee entered a stand-up forklift, traveled in reverse, and struck another lift that was also being used in the cleanup operation. Upon striking the other lift, the employee's foot was outside the confines of the equipment and was pinned between the two lifts. The employee was hospitalized with multiple fractures to the foot.",1
"An employee was smoothing the edge of a 1/4-inch thick steel plate with a disc sander when the employee's left thumb was pulled between the disc and the work rest, resulting in an amputation of the left thumb tip.",1
"An employee was prepping a mast to be moved to platforms when his left middle and ring fingers were caught between the chain/hook and mast, amputating his fingertips.",1
"On November 3, 2017, an employee was working with another employee to unjam a wrapper machine. The first employee was pulling on the jammed film wrap while the other was operating the controls. The sealer bar lowered and amputated the first employee's left ring and index fingertips. The machine was guarded at the time.",0
"An employee was looking at a hydraulic lift that was stuck when the lift fell and struck the employee, causing a back injury.",1
An employee was transporting a structural steel roll on a cart when it tipped over. The structural steel then rolled back and crushed his toes on the right foot. He was hospitalized.,1
"An employee was removing a baggage scale with two other employees. The employee was trying to obtain a passenger's ID under the scale when the scale fell onto the employee's left hand, amputating the middle and index fingertips.",0
An employee was walking to the rear of a machine when he slipped in a puddle of water and powder coating mix. He sustained a spiral fracture of his left tibia.,1
"An employee was feeding lumber into a reclaim saw when a block of wood became stuck on the table. He was attempting to remove the block of wood with his hand when the saw blade cut across the middle of his right palm, lacerating it from the thumb to the pinky. He was hospitalized and had surgery.",1
"On November 3, 2017, an employee was cleaning a shear when it cut and caused an amputation to the employee's right middle finger. The shear was energized at the time.",0
"An employee's index finger was crushed by a draw press, resulting in an amputation.",1
An employee was using a power tool when the tool cut his leg.,1
An employee was preparing pound cake mix when the employee's left middle finger was pinched and lacerated between a mixing bowl and a table.,1
"An employee was cleaning a burr off of rectangular metal with a wire brush machine when the employee's glove became caught in the machine. The employee's hand was then pulled into the machine, scraping skin off the bottom of the hand and the pinky and ring fingers. The employee was hospitalized.",1
"An employee was retrieving a 2-cell block from a pallet when his foot was caught in a loose strap attached to the pallet. He lost his balance and fell to the ground. The block then landed on his finger, pinning it between the block and the concrete, resulting in a partial amputation of his finger.",0
"While walking, an employee stepped off a curb and broke both ankles.",1
"An employee was standing on the ground near a pipe rack while other employees picked up a joint from a catwalk. The joint came off its cradle, rolling back onto the pipe rack and hitting the employee. He was pinned between two joints, suffering bleeding in his abdominal cavity.",1
"An employee was pushing a cart loaded with 4 steel columns that had plates at the end. A plate on the ground hit and pushed another column inside the cart. The employee's left pinky finger was caught between the plate and the cart, crushing it and amputating his fingertip.",0
"An employee was monitoring the loading of a railcar when he noticed a vent was leaking. He tried to close the secondary valve to isolate the leak. He put his safety harness on and pulled a probe up to close the valve and isolate the leak. When he pulled the probe up, he heard a pop. The vent hose blew off, spraying him with acetic acid. He suffered first and second degree burns to his lower legs and feet, requiring hospitalization.",1
"An employee was on a ladder removing an existing aerial wire when the employee fell 16 feet from the ladder to the ground, breaking an arm, foot, toe, ankle, and the left knee.",1
"An employee was operating a forklift and dismounted from it to pick up trash when the forklift started to roll backwards. As the employee attempted to jump back onto the forklift to stop it from rolling, the forklift ran over the employee's foot.",1
"An employee was removing a clip from a motorcycle when his screwdriver slipped and punctured his left eye, resulting in an eye injury requiring surgery.",1
"An employee was operating a utility vehicle with a mower attachment when he ran into a tree, causing his arm to become entangled in the steering wheel. The steering wheel jerked and struck his right wrist, breaking it.",1
"An employee was performing a self-rescue drill from a ski lift chair. While belaying down using rock climbing/mountaineering skills and equipment, the employee's equipment allowed him to rapidly slide down his rope over 15 to 30 feet to the bare ground under the chair. He suffered two fractured ribs, lumbar spine fractures (vertebrae 1-5), a mild concussion, and a blistered and rope-burned right hand.",1
"An employee was mixing caustic chemicals and water when the chemicals splashed the employee's shoulder, causing chemical burns.",1
"An employee was carrying a cake when she lost her balance, falling to her knees and hitting her head.",1
"An employee was clearing a jammed coil on a roll-forming machine when the die came down and crushed his left hand. He was hospitalized, and his left hand was surgically amputated.",1
An employee was cleaning jammed bread from a bread slicer when it amputated a fingertip.,0
"An employee was using a step stool to place an item on a shelf when she fell, landing on and fracturing her left hip.",1
Employees were rolling tape onto a concrete floor to divide locations. The injured employee was stretching tape while another employee secured the tape in place. The tape ran out and the injured employee lost her balance falling to the concrete floor and breaking the right forearm and wrist.,1
An employee was using a band saw to cut a carbon brush when the saw amputated the employee's fingertip.,0
An employee was up on a stairway opening valves on a wellhead when the stairs gave way. The employee suffered a broken left leg.,1
"Prolonged sitting lead to a blood clot in an employee's right leg that moved into his lungs, causing a pulmonary embolism.",1
An employee was working near a boring machine when the employee's hand was caught between a rotating pipe and cable. The employee suffered four finger amputations and a broken arm.,1
"An employee was trying to access the roof from a ladder when he fell off and hit the ground, breaking his ankle.  The ladder did not extend 3 feet above the access point and was not tied to any structure at the time.",1
"An employee was helping a maintenance electrician work on street lighting. The maintenance electrician pulled the 75-amp breaker in the panel and a small piece of the breaker broke off, staying inside the panel. The electrician was trying to retrieve the broken piece when it fell into the panel, striking the bus bar and causing an arc flash. The employee was holding a flashlight next to the electrician when the arc flash occurred. He suffered burns and was hospitalized.",1
"An employee was working in a meat processing line making product when the employee's hand was caught in a machine, amputating the right middle finger.",0
"An employee was operating a fiberglass winder when the employee's arm was pulled into the winder, breaking it.",1
"An employee was walking toward a register when she took a step, tripped over her feet, and fell to the floor. She fractured her right hip.",1
An employee was moving equipment at a trade show. The equipment fell off the forklift and crushed the employee's foot. The employee sustained a right ankle fracture.,1
"An employee was moving a metal container of defective, water-filled bottles (which were about 700 degrees Fahrenheit) when a flash fire occurred. This probably occurred because one of the hot bottles fell to the ground and made contact with machine oil residue. The employee suffered a second degree burn to his right cheek and left ear from the heat of the flash fire, requiring hospitalization.",1
An employee was working near a letter sorting machine when another employee pushed a rolling rack into his back. He suffered a neck injury and was hospitalized.,1
"An employee was feeding material into a mill on a polypropylene plastic consumable line when the employee's gloved hand was caught between the rolls in the mill, resulting in the amputation of four fingers and the thumb.",1
An employee's fingertip was amputated by a pneumatic piston pump. The pump was not guarded or sitting properly on its barrel at the time of the incident.,0
"An employee was working under the rig load of an overhead cab crane when the load/sling shifted, came off, and crushed the employee. The employee was hospitalized with chest and abdominal injuries.",1
"On 11/4/2017, an employee was dismounting a bulldozer when the employee's right foot slipped. The employee then made hard contact with the ground, breaking the tibia and fibula above the right ankle.",1
"An employee was working inside a power boiler (permit-required confined space) while arc gouging (cutting) a 30-foot long by 27-inch wide I-beam into 5-foot sections. He was standing on the I-beam he was cutting and another I-beam that was positioned 6 inches away. The I-beam he was gouging shifted after he finished cutting through it and moved toward the adjacent I-beam. As the I-beam shifted, it caught his right arm between the I-beams. He sustained third degree burns to his right forearm and hand from the I-beams, which were heated from the arc gouging process.",1
An employee was delivering medication and suffered an allergic reaction to a vial of Rocephin powder on the floor.,1
"An employee was picking up a mud motor to trip in a hole when a plate fell off the top drive and struck the employee, causing a right index finger amputation.",1
An employee was elevating a scissor lift while inside the lift's basket when one side of the scissor lift's guardrail system became caught on the guardrail system of an adjacent stationary lift. The scissor lift the employee was in then toppled over and fell to the ground. The employee sustained fractured ribs on  the left side of his body.,1
An employee was trying to remove a jam on a kiln line when the line cart moved and amputated the employee's index fingertip.,0
"An employee was prepping the stockroom to receive a distribution center merchandise truck. He was walking past a U-Boat with freight when he bumped into the U-Boat with his right arm, which caused the boxes to fall. The employee then tripped over the boxes and fell, fracturing his left hip.",1
"An employee was threading paper on to a paper roll due to a paper break. While performing the threading procedure, the employee's left arm became stuck between the paper roll and the front winder drum. The employee suffered a fractured left humerus with damage to the upper muscular tissue and elbow arteries, requiring hospitalization.",1
An employee was webbing film in a bag machine and amputated the right middle finger.,0
"An employee was cutting on a column and began to cut into a pipe with a torch. When the torch cut through the pipe, diesel (residual fuel) splashed back onto his body. He sustained burns to his right arm, left wrist, and the right side of his face, requiring hospitalization and surgery. PPE was not worn at the time of the incident.",1
"An employee was working on top of jet bridge stairs near a lift used for transporting items (bags, strollers) to the ground. The lift malfunctioned and fell approximately 9 feet to just about 1 foot from the ground. The employee fell from the platform onto the lift and rolled onto the concrete, suffering a broken collarbone, broken ribs, a punctured lung, and a cracked vertebra.",1
"Employees were performing pressure services, hydrostatic testing on a blowout preventer. When one of the employees attempted to loosen bolts on the wellhead spool, the hydraulic torque hammer wrench and wellhead spool struck the employee’s left hand, partially amputating the index finger.",1
"A backhoe operator was digging a hole with the assistance of a spotter. As the operator began to set down the bucket, the spotter slipped into the hole. The spotter's foot was then crushed by the backhoe bucket, breaking a toe.",1
An employee was descending an exterior stairway when he lost his balance and fell to the concrete flooring (landing) below. He fractured his right tibia and fibula.,1
"An employee was calibrating a scale on a compounding tank (where chemicals are mixed) while standing on a three-step ladder. While loosening up a connection on top of the tank, the employee fell approximately 3 feet to the ground, fracturing the left wrist and hip.",1
"An employee was performing mechanical work on a roll-off truck by replacing the rear end on the axle. He was guiding the rear end on a chain hoist  when the rear end slipped. His left hand was then caught between the chain and the rear end, lacerating his left ring and middle fingers. His left pinky finger was also amputated.",0
"An employee was driving a forklift. The employee's foot/leg was outside of the compartment when his foot was caught on a trailer, injuring his foot and leg.",1
An employee was stepping down into an excavation when he fractured his tibia.,1
"An employee was cleaning a walkway with a compressed air hose when he tripped over the hose and fell to the ground. As the employee fell to the ground, his right hand landed on the belt of a conveyor system. His hand was then pulled into the area of the conveyor where the belt turns over the drum, and his right hand was caught between the belt, drum, and frame of the conveyor. He sustained a laceration and burns to his right hand and wrist.",1
"An employee was welding when it became necessary to replace the electrode. He lost his grip on the electrode and it fell, puncturing his leg through his denim jeans. The puncture wound became infected, requiring hospitalization.",1
"An employee was assembling a mower deck when it shifted and sliced the employee's left thumb, amputating it.",1
An employee was using a cherry picker to retrieve an order from pallets that were approximately 20 feet high. A swing reach forklift struck the cherry picker causing it and the employee to fall to the ground. The employee was wearing a harness at the time. The employee was hospitalized for injuries requiring surgery.,1
An employee slipped on the floor in a kitchenette and suffered a knee injury.,1
An employee was trying to light a propane grill when the gas in the grill caused an explosion. The employee suffered first and second degree burns to the face/neck.,1
"An employee was walking back toward her vehicle after delivering mail when she fell down, breaking her knee and tearing ligaments.",1
"An employee was installing a termination on an underground electrical distribution cable when the cable became energized and the employee made contact. The employee suffered electrical burns to the hand and knee, requiring hospitalization.",1
"An employee was trying to lift a container full of hot liquid when she made contact with the liquid, suffering second degree burns on her face, neck, torso, chest, and stomach.",1
"An employee was moving sodium hydroxide containers when the chemical spilled on the employee's foot, causing a chemical burn.",1
"On November 6, 2017, an employee slipped and fell while walking. The employee dislocated the left wrist while trying to brace for the fall, requiring hospitalization and surgery.",1
"While operating a forklift in a warehouse, an employee's left ankle was struck by another employee driving a forklift. The employee suffered a broken foot/ankle.",1
"An employee was approximately 6 feet up an 8-foot ladder when the employee lost footing and tried to grab a ceiling grid for support. The employee then fell, breaking a wrist.",1
"An employee was walking when she slipped and fell to the floor, fracturing her hip. She required hospitalization.",1
"While working on a drill press, an employee suffered a right index fingertip amputation.",0
"An employee suffered a back injury while picking orders and lifting a box, requiring hospitalization.",1
"An employee was removing a 900-pound counterweight rigging to transfer it to a forklift when the counterweight fell to the ground during the transfer and landed on the employee's lower right leg. The employee sustained multiple fractures to the lower leg, requiring surgery and hospitalization.",1
An employee was backing a tugger into a battery charging station when his left index finger was caught and smashed between the tugger and the charging station.,1
"An employee was using a CNC machine when a part flew out of the machine and struck the employee's body, causing internal bleeding.",1
"An employee was working on a storm-damaged tree that was leaning on a shed and on a car. The tree shifted and the shed wall collapsed, causing a piece of the tree to hit the employee's leg. He suffered a broken right tibia and fibula and a right arm bruise.",1
An employee was trying to remove a bag that had become lodged on the underside of a bagger machine when the bag cutter blade severed his fingertip.,0
"An employee was cleaning a bathroom when she turned around and fell to the ground, fracturing her left hip. She was hospitalized.",1
An employee was directing a sow to an area when the sow charged and caught his finger between a panel and a crate. His right middle finger was partially amputated.,1
"An employee was taking samples of sulfuric acid when the sample bottles fell to the floor. The acid contacted the employee, causing chemical burns to the face, arms, legs, and chest.",1
"An employee was carrying a 4X4 in an alleyway when he tripped and fell, breaking his right lower leg.",1
"An employee was installing an electrical breaker in a breaker box. When the box was energized, an arc flash occurred, and the breaker blew out of the side of the breaker box. The employee suffered a hematoma to the left arm.",1
"An employee was exiting a step deck trailer approximately 42 inches off the ground when the employee fell off the trailer to the ground, injuring the right knee.",1
An employee was moving a travel trailer in a parking lot when he tripped. Another employee who was operating a forklift then ran over and crushed his right foot.,1
An employee was setting up a die in a hydraulic press when the machine was actuated via the foot pedal. The press then amputated 1/2 inch of the employee's right ring finger.,0
"An employee was cleaning/wiping the face of a machine guard when his rag was caught in the drive chain, which then pulled his third left-hand digit into the chain/sprocket, pinching the tip. His digit tip was surgically amputated.",0
An employee's right thumb was pinched and partially amputated between the jogger and pallet on a paperboard sheeting machine.,0
"An employee was working from a 6-foot portable step ladder when he lost his balance and fell to the floor. He suffered a dislocated finger, fractured vertebrae, and a fractured skull, requiring hospitalization.",1
"An employee was lifting a toilet into the back of a rear-load trash truck when the top portion of his right ring finger was smashed between the toilet and the rear body of the truck, suffering severe tissue damage. The damaged portion of his finger had to be surgically amputated.",0
"An employee was working in a kitchen prep area, using a mechanical slicer to cut tomatoes, when his right index finger was amputated by the slicer blade. The guard for the equipment was in place at the time.",0
An employee was checking a truck out of the site and gave the driver his manifest ticket. The employee turned around to go to a guard shack. The truck driver may have turned his wheels too tight and ended up striking the employee's legs with the truck's rear tires. The employee suffered soft tissue injuries.,1
An employee was rebuilding toilet tank parts and cleaning out the tank when it shattered. Pieces of the tank lacerated the employee's left wrist (main arteries and tendons).,1
An employee was backing a truck to a dock. The truck contacted a low hanging electrical wire and the employee was shocked.,1
An employee was loading a partial roll of film on a bagging machine when a bar fell from one end of the machine. The employee's right middle fingertip was caught and amputated between the bar and the roll of film.,0
"An employee's prosthetic leg/foot became tangled in an inventory cart and then dislodged, causing the employee to fall and fracture the right hip. The employee was hospitalized.",1
"An employee was walking by a swag station to talk to another worker when her right thumb was caught on a small vent line clamp, causing an amputation to her thumb.",0
"An employee was adjusting a press using a hammer when the hammer struck the employee's hand. The employee's injury became infected, requiring overnight hospitalization.",1
"On November 7, 2017, an employee was using a chop/miter saw to cut a section of roll material when the saw kicked back and caused his left thumb to contact the blade. He suffered a deep cut to his thumb and was hospitalized.",1
An employee went outside the store to break up a fight in which two assailants were attacking a customer and to inform them he had called the police. The assailants then got in their car and tried running over the employee. He sustained a left wrist fracture and left hip socket damage.,1
"An employee was spraying a conveyor with water as part of the sanitation process when the employee contacted a sprocket on the conveyor, suffering a flesh wound to the right arm.",1
An employee was troubleshooting a cutting machine when his left middle and index fingers were caught between a belt and a pulley. Both fingertips were amputated above the nail. He was hospitalized.,1
"An employee was at the rear-end of a forklift, trying to see why the forklift was caught on an I-beam. The I-beam fell and pinned the employee's leg, breaking bones and causing a contusion. He was hospitalized.",1
"An employee was installing a front-end loader's drive sprocket. When he pushed the sprocket over the drive motor, his right middle finger was pinched between the surface of the sprocket and the drive motor, resulting in a fingertip amputation without bone loss.",0
An employee was shocked while installing suspended light fixtures.,1
"An employee was loading a dock plate onto a trailer using a forklift and metal chain. While he was attempting to fix a dock flap on the dock plate, the plate fell and crushed his left hand/fingers, resulting in a partial amputation of his left middle finger.",1
"An employee was using a powered pallet jack, lost control and struck a conveyor resulting in possible lower right leg fractures.",1
"An employee was riding on a gas-powered cart when she went around a sharp curve and fell to the ground, breaking her left ankle.",1
An employee was using band saw to cut frozen pork meat when the saw amputated his left index fingertip.,0
"An employee fell while descending a 6-foot step ladder that was used to access the attic, suffering a back injury.",1
"An employee was attempting to remove debris from a roadway when a broken treetop rolled over and struck him, fracturing his femur and pelvis.",1
"On 11/7/2017, an employee was hitching a trailer to a vehicle when the trailer hitch slipped, smashing and amputating the employee's left ring finger above the second knuckle.",0
"An employee was entering a dark garage when her foot caught the edge of a 3-foot concrete rise and she fell forward, lacerating her head and hyperextending her neck.",1
"An employee was stepping off a 2-step stool when his leg gave out and he fell to the floor, fracturing his hip.",1
"On November 7, 2017, at approximately 7:20 AM, an employee fell 30 to 40 feet from a second story roof, breaking his back and sternum.",1
"An employee was going to talk to a forklift driver when the forklift backed up and struck him, running over his foot. He suffered a left mid-foot fracture dislocation, with significant displacement.",1
An employee was cutting tape that accumulated on a box machine when his knife slipped and amputated his right index fingertip.,0
"An employee was troubleshooting a 480-volt electrical breaker box when it arc flashed. The employee sustained burns to his neck, face, chest, right hand, and right wrist.",1
"An employee was tugging on a jack when he cut his finger, requiring hospitalization.",1
"An employee was looking at bags that were coming across a belt. She was going to the belt when she tripped on a cord and fell to the ground, fracturing her hip.",1
An employee was cleaning out a tortilla machine when the employee's finger was caught and amputated between the conveyor belt and the machine's roller. The belt and rollers were not guarded at the time.,0
"An employee was fabricating a wooden tool using a lathe. His left hand was resting on the tool. As the tool was turning, his left index and middle fingers suffered friction burns.",1
"An employee was walking to grab zip ties from another employee when he tripped on a floor sill (approximately 5.5 inches high) and fell, breaking his hip.",1
An employee was injured while unloading a trailer.,1
"An employee had an allergic reaction to something in the building (possibly painting on another floor). The employee's throat closed up, requiring hospitalization.",1
An employee was getting ready to insert a part into a shear when his pinky finger was caught in the rollers and pulled into the shear. His pinky finger was de-gloved and his fingertip was amputated.,0
An employee was clearing debris from a rip saw when the blade amputated the employee's right thumb and middle and index fingers. The saw was running at the time.,0
The employee was maneuvering freight within the trailer for delivery and pinched their finger between a loaded pallet and the trailer floor resulting in a fingertip amputation.,0
"On November 7, 2017, an employee was driving a lift truck up a loading ramp while another driver was about to come down the ramp. The other driver stopped and signaled the employee to come up the ramp. The injured employee was trying to pull the truck to the side of the ramp when the wheel came off the ramp. He tried to raise the clamp-up boom to move the lift truck forward, but it started to tip over. He then jumped off and fell to the ground. The fork truck came off the ramp and the cage struck him in the back. He suffered a fractured hip, back and lower extremity injuries, and internal bleeding.",1
"An employee was performing maintenance on a skinning machine when his hand entered the machine, pulling the skin off his right palm, thumb, and the back of his hand.",1
"A digger derrick operator was positioning the boom off the back of a truck. He got out of the operator's chair and stepped onto the walk platform to the back of the truck to get a better view of the placement of the anchor and to instruct the ground man. He lost his footing and fell off the back of the truck resulting in a broken left elbow, a broken right wrist and facial lacerations.",1
"While walking through an area that was having its floor stripped, an employee slipped and fell, suffering a back injury. The area was closed off at the time of the incident.",1
An employee was operating an electric pallet jack to bring empty pallets inside when the employee was struck by the forks of an operator's forklift. The employee was hospitalized with a broken foot.,1
"An employee was using a pallet wrapping machine. He stepped back from the machine onto the forks of a forklift that was parked behind him. His foot twisted as it landed on the fork, breaking his right ankle.",1
"An employee was preparing to stow an auger drive shaft. To prevent the drive shaft from dragging on the ground, the employee planned to have the shaft tucked under a boom and temporarily tied off in an elevated position. Overhead obstructions prevented the employee from raising the boom and moving forward. To get the drive shaft into position, the employee stood to the side of the boom and had just started to pull the drive shaft toward the back of the truck when the boom was lowered. The tip of the drive shaft then contacted the employee’s foot, injuring the big and second toes and requiring surgery.",1
An employee's left ring finger contacted a double head saw blade and was amputated.,0
An employee was changing out a lower die when his left index finger became caught between the bottom point of the die and the frame of the press. He suffered an amputation to his finger.,1
"On November 8, 2017, an employee was starting to lift a steel I-beam that was wrapped with a steel chain and hooked onto a crane. The employee was holding the pendant and pressed the ""Up"" button on the crane. As he started to lift the I-beam, his left ring finger was caught and partially amputated between the steel chain and the hook.",0
"An employee was clearing a paper jam when he slipped and fell on some soap that was on the floor, fracturing his right hip.",1
"An employee was preparing pallets of bricks on a conveyor when the employee's fingers were pinched between two of the pallets, amputating the left little finger.",0
"An employee was walking when he tripped over the tines of a parked forklift and broke his right femur, requiring hospitalization and surgery.",1
"An employee was repairing a sectional garage door that had been hit by a motor vehicle and knocked partially out of its tracks. The bottom section of the door flexed, causing the rollers to come back out of the track. When this happened, the bottom two panels came out of the track and shot upwards, striking the underside of the employee's arm and knocking him off his ladder. He dislocated his shoulder.",1
"While carrying a tray or bowl, an employee's right foot collapsed. The employee fell forward to the floor, suffering head trauma, a brain hemorrhage, and a concussion. The employee was hospitalized.",1
"An employee was descending a ladder when she missed the last step and fell, breaking her left kneecap.",1
An employee was performing housekeeping when he went to pick up a plunger at a frac site. The plunger then slipped and amputated his middle fingertip. Impact gloves were not worn at the time of the incident.,0
An employee was offloading material when his leg fell through a floor opening. He fractured his back.,1
"An employee was diagnosing a problem with a crane gear box when the employee's left glove was pulled into the gear box, crushing the employee's left index fingertip. The fingertip was eventually amputated. The crane was not locked/tagged out at the time.",1
"An employee was operating a pallet jack when he ran over an oil spill on the floor, causing him to spin out of control. He stepped off the pallet jack and his right foot was caught between the jack and a rack, requiring hospitalization.",1
"An employee was operating a pop-up saw when he activated it via the foot pedal and his hand contacted the blade, amputating his fingers. The saw was guarded at the time.",0
"An employee was picking up a load for transport and trying to place a tarp over a trailer when the tarp started to have issues. He climbed the trailer and then fell to the ground below, breaking his right tibia.",1
An employee was making a bank deposit when a robber shot her right thigh.,1
An employee was cutting a small piece of wood on a table saw and amputated his left thumb. The saw was guarded at the time of the incident.,1
"An employee was removing a hot bag of soup from a kettle when the bag fell and burst on his right leg, causing a third degree burn. He was hospitalized.",1
An employee suffered a foot fracture while running from the scene of an accident in an interstate work zone.,1
"An employee was removing a floor tile with a crowbar when a piece of tile flew into his eye, requiring surgery and hospitalization. He was wearing safety goggles and gloves at the time of the incident.",1
"On November 8, 2017, around noon, an employee was walking to clock in when she lost her balance and fell against the brick wall of the building, breaking her left shoulder and requiring surgery.",1
"An employee was removing a diverter valve after emptying and depressurizing the holding tank. After the safety clamp was removed, the back-pressure splashed product on the employee, burning both hands and forearms.",1
An employee was walking behind a milling machine when it unexpectedly moved backwards and struck the employee. The employee suffered fractures to the right foot and ankle.,1
"An employee was maneuvering pallets, slipped on the ice and fell resulting in a broken left leg.",1
"An employee was attempting to remove a piece of dough from a press mixer when the employee's right hand contacted the rotating auger, amputating the right ring finger. The press mixer was guarded at the time.",0
"An employee was hammering one end of a hose when the opposite end blew off under pressure, striking the employee and causing a laceration.",1
"On November 9, 2017, an employee was operating a welder in the tool room. The employee was attempting to grab a part from the welder when the employee's foot hit the foot pedal and actuated the machine. The welder then amputated the employee's right index fingertip.",0
"The front wheel of a tow motor struck the back of a spotter's foot, fracturing it.",1
"An employee was securing straps and cables to a tarp on top of a sugar beet pile when a microburst hit the pile. The straps and cables came off the tarp and hit the employee. He then became rolled up in the tarp and fell off the pile to the ground, suffering head, wrist, and rib injuries.",1
"An employee was rebuilding a sprayer arm. He had bolted the sprayer arm to the main bench and was attempting to wipe off grease when the sprayer arm struck and crushed his right thumb, fracturing it. The sprayer arm was energized and running at the time.",1
"An employee was working on a pump truck when a gear cylinder engaged unexpectedly. Both of the employee's hands were caught in the belt pulley, resulting in amputations of three fingers from each hand.",1
A temporary employee was operating a punch press and attempting to adjust a part when his foot stepped on the foot pedal and actuated the press. The press dies then amputated his left middle and ring fingertips.,0
"An employee was cutting ribs with a knife when the blade lacerated the employee's left pinky finger, requiring hospitalization.",1
"An employee was retrieving items from a shelf while on a ladder when the employee fell to the ground, breaking a leg.",1
An employee was feeding paper into a tea bagging machine when it amputated her right index and middle fingertips.,0
"An employee was operating a brake press when it pinched and crushed the employee's finger, causing a laceration and open fracture.",1
An employee was stocking roofing flashing when it fell on and lacerated the employee's lower left arm.,1
"An employee pushed the button to start an oven's purge cycle when a metal plate came flying off the furnace and struck the employee's head/face. The employee suffered lacerations, a broken jaw, and missing teeth.",1
An employee was picking up a piece of material from the floor when an overhead hoist chain broke and struck the employee's head.,1
"An employee was struck by a forklift, and the employee's left leg was briefly caught under the forklift. The employee suffered a broken left wrist and leg, as well as serious leg lacerations and contusions. The employee was hospitalized and had surgery.",1
"An employee was identifying whips to ensure they were not hot and then ohming them out. When he tested the last one, electricity jumped across his hands, causing third degree burns that required hospitalization.",1
"An employee was splashed by hot water while cleaning a tank truck, suffering a second degree burn to the left shoulder and arm.",1
"An employee was using an extension ladder to gain access to a section of a shredder to perform maintenance. The base of the ladder was inches away from the frame of a grapple crane. As he reached the top of the ladder and went to step onto the shredder platform, the ladder slipped back several inches into the crane frame and he lost his footing. He fell approximately 10 feet to the concrete below, striking his head and back.",1
An employee was manually moving material to a roller. His hand was on the leading edge when his left middle finger was caught between the material and the roller.,0
"An employee was attempting to install a ship's ladder into a ceiling opening. He was leaning into the hole from the roof and using a cable come-a-long to hoist the ladder up to the opening. The hoist then slipped, causing the ladder to fall and pull the employee down 10 feet through the opening. He landed on the ladder, breaking his left leg and seven ribs.",1
"An employee was cleaning a drum mixer when his clothing became caught in the mixer, pulling his arm into the machine. His upper right arm was lacerated. The machine was unguarded and not locked/tagged out at the time.",1
"An employee was stepping from a ladder onto a roof, lost his footing and fell approximately 15 feet to the ground resulting in a fractured tibia and fibula.",1
"On November 9, 2017, at approximately 10:30 AM, an employee was using a forklift truck to dump a dumpster full of trash. As the dumpster tipped forward, the weight of the dumpster shifted, catching the employee's finger between the fork of the fork truck and the dumpster. The employee's ring fingertip was amputated.",0
"An employee was inspecting boxes when the employee's finger contacted a conveyor chain, amputating the fingertip.",0
"On November 8, 2017, around 10:50 a.m., an employee was moving out of a man basket onto a housing unit to prepare it for rigging when he stepped on ice and fell 15 feet onto the dirt below. He was hospitalized with a fractured ankle and back.",1
"An employee was delivering mail when his right thumb was slammed in a sliding vehicle door, suffering a distal laceration. His right thumb was amputated.",1
An employee was injured while cutting into a medium-pressured ductwork to tie in a VAV box.,1
"An employee was spreading concrete when some of the concrete entered his boot, burning his heel.",1
An employee was loading a piece of machinery onto a truck when his finger was caught underneath a pallet resulting in an amputation injury.,1
"An employee was attempting to place a work station stand in a pump gear box when her thumb was trapped between the stand and a marination tumbler, causing an amputation.",1
"An employee was unloading a pallet when he tripped and fell, breaking his right femur in two places.",1
"While installing overhead electrical lines, an employee received an induced electrical surge, suffering electrical burns on the hands. The employee was hospitalized overnight.",1
"An employee was pulling down the lift gate on his delivery truck when his left middle finger was pinched by the gate, suffering an amputation injury.",0
"An employee was on a ladder cleaning a kitchen exhaust duct and fan when the ladder slipped from under him as he was descending. He fell 12 to 15 feet to the asphalt ground, fracturing vertebrae.",1
An employee suffered a propane burn to the right hand while changing a propane bottle on a forklift.,1
"On 11/10/2017, an employee was backing a piece of equipment out of a trailer when a pallet on the equipment hit the trailer door, causing the door to come down and land on his arm. He was hospitalized with a broken arm.",1
"An employee was working from a ladder, installing a header/beam and form board/plywood, when he suffered a cramp in his lower back, which caused his leg to fall asleep. He then fell from the ladder onto protruding pieces of unguarded steel/rebar, impaling his thigh.",1
"An employee was working removing a set of elevators at a gas well drill site when a second employee started a power swivel. The employee's left arm became entangled in the power swivel, breaking it and partially amputating the left ring finger. The employee was hospitalized.",0
"An employee was using a power jack to move pallets when the power jack pushed the employee's foot into the wall, crushing and fracturing it between the jack and the wall.",1
"An employee was directing a forklift operator in placing a motor. The forklift operator was moving the motor into position and the employee was rotating the motor to align the bolt holes when the lifting eye backed out of the motor. The motor shifted and fell, and the employee jumped a guardrail to get away from the falling motor. The guard rail was 42"" affixed to a platform that was 25"" off the concrete floor. The employee suffered a fractured tibia below the knee upon contact with the floor, requiring hospitalization.",1
"While operating a drill press, an employee suffered a thumb amputation when material became caught in the drill press.",0
"An employee was repositioning a cant when the cant rolled back, smashing his left index finger between it and the cant deck. His fingertip was amputated (no bone loss).",0
"An employee was hoisting up into a rig derrick when his foot was caught between two braces, amputating his left big toe.",0
"On November 10, 2017, an employee was installing carpet when he attempted to move an A-frame cart with 33 large sheets of hardboard. The cart then tilted and fell on him, fracturing his right leg.",1
An employee was operating a wire sleeving machine and re-inserted the screws into the machine. She was attempting to grab the wire sleeve when her right index fingertip was amputated by the machine's blade. The machine's safety bypass bar was removed at the time of the incident.,0
An employee was moving a computer from one desk to another and began to have shortness of breath.,1
"An employee tripped over a cord during a procedure in the operating room, suffering a broken arm.",1
"An employee was on top of a spiral chiller, pulling on a belt, when he suffered a herniated disc in his back.",1
"On November 10, 2017, an employee was taking out trash when he slipped and fell on ice, fracturing his right wrist and requiring surgery.",1
"An employee was running a roller mill when the employee's right hand was pulled into the roller mill, amputating the index and middle fingers and damaging the ring finger.",0
"An employee fell off a ladder raised to the second story of a house, fracturing his back.",1
"While manually handling a skid, an employee tripped and fell backwards on the concrete floor, fracturing the right femur.",1
An employee was using a 4.5-inch handheld grinder to grind a concrete form when the employee's right glove was caught in the grinder. The employee suffered a laceration involving a tiny portion of flesh that was amputated from the right pinky finger.,0
"An employee was gathering supplies and helping another associate when she stepped on the back of the associate's shoe heel, tripped, and fell. She hit her head on a cabinet and injured her right shoulder.",1
An employee was programming a garage door. The employee's hand was resting on the door chain when the equipment was started. The door chain then amputated the employee's index fingertip beneath the nail.,0
An employee was walking to get a mop bucket when she tripped over a chair and fractured two ribs.,1
"An employee was struck by a forklift while riding a pallet jack, suffering a compound leg fracture. The forklift driver's view was obstructed at the time.",1
"An employee was climbing a ladder, slipped and fell.",1
"An employee was cutting down a tree. The tree was on a slope, and when the employee cut it, the tree fell and hit the employee's face.",1
"On November 11, 2017, an employee suffered a hand fracture while attempting to stop a coil from falling off a horse.",1
"An employee was unloading a pallet when the employee tripped over the edge of the pallet and fell to the floor, suffering a left hip injury that required surgery and hospitalization.",1
An employee had loosened two bolts on an isolation plug and was working on the third one when the employee suffered fractured ribs and a collapsed lung.,1
"While parking a car, an employee put it in reverse instead of drive. The employee then suffered a fractured right leg.",1
"An employee was removing a flange from a client's oil/gas well with a hydraulic torque wrench. While the employee was placing the torque wrench on the nut, the employee's finger was in a pinch point between the torque wrench and nut. The employee then inadvertently stepped on the controller, which activated the torque wrench, amputating the employee's right index fingertip and nail.",0
"On November 11, 2017, at approximately 4:45 p.m., an employee was looking at a form while walking up a stairway. The employee tripped and fell down the stairway (approximately 4 risers) and was knocked unconscious. The employee was hospitalized.",1
"An employee was riding on the side of a forklift when the employee fell to the ground and was run over by the forklift, fracturing his leg.",1
"Two employees were discussing job tasks when they began arguing and shoving one another. One employee pushed the other employee, who fell backwards to the ground, injuring her neck, back, and foot.",1
"An employee was working on a malfunctioning stem valve on the line. The employee's finger was inside the valve when 8 pounds of pressure came on and the valve closed on the employee's right third finger, removing the tip of the nail and some skin.",1
"An employee was standing on the ledge of a booth to dust the blinds when her foot slipped and twisted her right ankle, causing her to fall down onto the booth and injure her right leg. She was hospitalized with a right ankle fracture.",1
"An employee was conducting layout with a coworker. The injured employee was walking to move some construction material that was in the pathway of the layout. On the way back to his instrument, he walked behind a dump truck that was being loaded. As the operator attempted to place a load of concrete into the dump truck, a piece of the concrete missed the dump truck and fell, striking the employee on the top of the hard hat. The employee suffered concussion symptoms.",1
"An employee was installing roof trusses on a new building. While standing on a masonry concrete wall, he fell 12 feet to the ground, injuring his spleen, ribs, and right leg. He was hospitalized.",1
"An employee was running a mill when his left index finger was caught on the strip-off knife, amputating his left index fingertip.",0
"An employee was installing a rotating head bearing when the bearing slipped and smashed the employee's right hand, breaking it.",1
"On November 11, 2017, an employee was working on the fourth rung of a 10-foot step ladder, attempting to secure polyethylene plastic to an inside wall opening for weather protection. The employee  reached and grabbed a threaded rod protruding from the concrete ceiling to aid in stability while performing a stapling task. The threaded rod unexpectedly detached from the ceiling anchor and caused the employee to lose balance and fall from the ladder to the cement floor. The employee suffered a fractured leg, dislocated ankle, and torn tendons, requiring hospitalization.",1
"An employee was installing rebar when adjacent rebar fell and hit the employee, who suffered bruises and a broken arm.",1
"An employee was walking when he fell on the ground, fracturing his head.",1
"An employee was welding on steel racks when his clothes caught on fire, resulting in burns to the torso.",1
An employee was restacking cases of soda when he rolled and broke his right ankle.,1
"An employee was stacking an empty 40"" x 48"" pallet onto a stack of other empty pallets when his foot became hung up on the pallet at the bottom of the stack. He fell to the same level, striking and fracturing his left hip on the concrete.",1
An employee was attempting to clear extra material from a mandrel when part of the fabric looped over the employee's left little fingertip. The mandrel pinched the fingertip off at the last joint.,0
"An employee was sweeping the floor when he lost his footing. He reached to steady himself and grabbed a pallet of diapers, which then fell onto his foot, fracturing his upper ankle.",1
"An employee was pursuing individuals when the employee fell onto barbed wire, lacerating the left eye and damaging an eye tendon. The employee was hospitalized.",1
An employee was moving a metal staircase away from an in-feed conveyor when his thumb was caught between the metal staircase and the guard/control box on the conveyor resulting in an amputation injury.,1
"An employee was on a 12-foot extension ladder installing a client's Christmas decorations when the ladder slipped. He fell 6 feet to the ground, fracturing his left hand and left foot and suffering trauma to his right foot. He was hospitalized.",1
"On November 12, 2017, an employee was delivering packages and pulled into a customer's driveway. While stepping out of her vehicle, she fell on uneven concrete, fracturing her pelvis.",1
"An employee was emptying trash at a fuel island. A car attempted to change location at the fuel island, didn't see the employee, and hit her.",1
"An employee was removing scrap veneer from a conveyor when his glove was caught in the conveyor. His arm was then pulled into the conveyor, fracturing his wrist and forearm. The conveyor was powered on at the time.",1
"An employee was walking from a restaurant to his truck when he tripped and fell onto a concrete support beam. He suffered a sprained left ankle, a laceration near his right ear, and a contusion on the right side of his head.",1
An employee was walking out of the office when her leg gave out and she fell breaking a leg.,1
"On November 12, 2017, an employee was caring for a patient at bedside when the employee stepped back and tripped on a piece of medical equipment's power cord. The employee fell, landing on the hip/lower back and suffering a lumbar compression fracture.",1
"On November 12, 2017, an employee's foot became caught in a pallet fork notch. The employee turned to walk away and tripped, falling onto the concrete floor. The employee suffered a right hip fracture.",1
"An employee was turning a box and lifting it to prevent it from stacking incorrectly on a palletizer. As he lifted the box, his right ring finger touched the palletizer's moving conveyor belt and suffered an amputation.",0
"An employee was sitting on a casing head valve to hold himself up while working in a cellar. He was holding onto a stud with his left hand for support. He was cutting approximately 14 inches off of the casing using a torch when the blowout preventer became off-center and shifted to the side. His left index, middle, and ring fingers were then caught and smashed between the stud and casing, requiring surgical amputation of two fingertips at the base of the nail and one fingertip at the first knuckle.",1
An employee was struck by a 2' x 2' x 8' cement block that fell from 4 feet above the ground when it was hit by a skid steer. The employee's leg was amputated below the knee.,1
An employee was testing a motor when his right hand entered the rollers resulting in a crushed and fractured forearm. The motor was running at the time.,1
"An employee was loading tubing into a double bender when her left index finger was caught between the tubing and the die, amputating the fingertip.",0
An employee was using a pneumatic nail gun when it went off and shot him in the leg.,1
"An employee was unloading a delivery from the side cooler door of a truck trailer when he stepped back, lost his footing on the platform, and fell backwards to the pavement, hitting the back of his head. He suffered bleeding inside his skull and a scalp laceration, requiring hospitalization.",1
An employee was loading crane equipment onto a trailer truck. The employee was adjusting a pin on mats being stacked to a load when the employee's left ring and middle fingers were caught between the trailer and the mats. Both fingers sustained amputations.,0
"An employee's foot became caught on a dock door ramp. The employee then fell on top of the portable loading ramp, suffering right shoulder pain and a chest contusion.",1
An employee was struck by a forklift that was backing up resulting in three broken bones in the left foot.,1
"An employee was using a chain fall/come-along hoist to lift a steel tank. The hook on the chain slipped out of the welded lifting pad-eye on the tank. The tank then fell approximately 5 feet, striking and fracturing the employee's left forearm.",1
"An employee was forming a small part on a press brake when his left index fingertip was caught and smashed between the punch and die, resulting in an amputation.",0
"An employee was on a ramp loading a box onto a truck when he stepped back and fell approximately 3.5 feet to the ground, fracturing his left arm and wrist.",1
"On 11/13/2017, at 7:00 AM, an employee was using a chain winch to remove a screw auger from a tube in the boiler room. The movement of the auger caused a pulley to turn, and the employee's finger was pinched between the pulley and a protruding bolt head. The employee's right index fingertip was amputated.",0
An employee was unrolling shrink wrap from a vertical shrink wrap roll when a passing forklift ran over and crushed his foot.,1
"An employee was climbing an aluminum ladder attached to a tanker truck when the ladder broke at the supports, causing the employee to fall 5 to 6 feet to the ground. The employee suffered a broken left ankle.",1
"An employee was exiting his truck when he was struck by a passing vehicle, fracturing his right tibia.",1
An employee was stepping off a stand-up forklift truck when another employee reversing a sit-down forklift struck the employee. The employee suffered a broken pelvis and was hospitalized.,1
"An employee was operating a platform lift when he fell approximately 16 feet to the floor, suffering a concussion. He was not tied off to the lift at the time of the incident.",1
"An employee tripped and fell while stocking a cooler, breaking her hip.",1
"An employee was attempting to free a stuck piece of veneer from rollers when her right little finger was caught in the roller bed drive chain, amputating her fingertip.",0
"Two employees were mowing vegetation under a powerline with a mulching machine. Due to the rough terrain, the machine had to be pulled out with a winch that was on the machine. The winch cable broke, causing the machine to roll onto its side with one employee inside. The employee injured his back and was hospitalized.",1
"An employee was exiting a box truck when he stepped awkwardly and felt a pull or pop in his back, followed by tingling in his left leg. He was hospitalized.",1
"An employee was welding and installing an economizer for a boiler from a temporary elevated work platform when he fell approximately 15 feet to the concrete floor, fracturing his pelvis.",1
"An employee was picking up scrap and loose material when another employee swung some aluminum angle flashing and struck the first employee, who suffered a lower left neck laceration. The injured employee was hospitalized.",1
An employee was using a pry bar to remove a section of a plywood from a panel when the pry bar slipped and fractured his left thumb. He was hospitalized.,1
"An employee opened a rolling door, then walked out on a dock plate to speak to the driver of a delivery truck that was being unloaded. The dock plate collapsed, causing the employee to fall approximately 4 feet. He broke a femur and injured his hip, requiring hospitalization.",1
"An employee got on a manlift. When the lift reached the top level, the employee fell approximately 18 feet through the hole of the manlift to the lower level, requiring hospitalization for injuries to the right pelvis and knee.",1
An employee suffered first and second degree steam burns to the back while installing equipment at a customer's brewery.,1
"On 11/14/2017, at approximately 1:30 PM, an employee was plugging a well when an unexpected flow of oil and gas occurred, causing a fire that severely burned the employee.",1
"An employee was cutting an empty 55-gallon barrel with a blowtorch when vapor inside the drum ignited and the lid hit the employee's face, lacerating it and breaking the cheekbone.",1
"An employee was changing a plastic roll on a pour line near a cut-off saw when his hand/arm were caught in the roller, resulting in a compound fracture to the left forearm.",1
An employee was standing on the rear left platform of a refuse truck. His right leg was on the truck's tailgate while the sweep blade was operating. The sweep blade then struck and lacerated his upper right leg.,1
An employee was walking near a machine that was in operation when he noticed a loose wire on a large reel as the reel was rotating. The employee was caught by the loose wire causing the reel to flip the employee over and onto the ground resulting in a concussion and whiplash to his body and neck.,1
"An employee and a forklift driver were attempting to unjam a pallet of product that had become wedged under a guardrail. The employee's foot was on top of the pallet when the employee asked the forklift driver to back up. The forklift moved in the wrong direction, and the employee's right leg was trapped between the pallet and the guardrail, breaking the employee's right ankle.",1
An employee was standing on the side of the highway when he was struck by a passing vehicle's side mirror. The employee was admitted to the hospital for facial surgery.,1
An employee was attempting to remove adhesive from the gate valve while the machine was in operation. The gate valve closed on the employee's right middle finger amputating the fingertip.,0
"On November 14, 2017, at approximately 3:05 p.m., an employee was operating a stand-up reach lift in reverse when he turned sharply. The powered industrial truck then slammed into a guardrail. His left foot was crushed and fractured between the guardrail and the powered industrial truck, requiring hospitalization.",1
"An employee was conducting foot patrol when an assailant struck him multiple times, fracturing his right ankle.",1
"An employee went to the south side of a machine to grab an extruded plastic sheet and realized the roller assembly was in the up position instead of down. While the assembly was lowering, the employee leaned forward over the tote bin. The roller assembly continued and made contact with the employee's back, causing the employee's torso to be wedged between the roller assembly and tote bin resulting in a fractured sternum.",1
"An employee was positioning all-purpose containers when the employee tripped over some unsecured webbing and fell, suffering a possible leg injury or fractured hip.",1
"An employee was walking down vee-door stairs, using the railing hand method on the hand rails. He was almost to the bottom when the roller assembly shifted and struck his left hand against the handrail, fracturing his pinky finger.",1
"An employee was cutting meat with a band saw when he attempted to wipe fat off the bandsaw table. His left ring finger was then caught in the blade, amputating his fingertip. The bandsaw was running at the time of the incident.",0
"An employee was reversing a forklift when the employee collided with a second reversing forklift. The employee's foot was wedged and injured between the two forklifts, requiring hospitalization.",1
"An employee was watching a sub-winch cable run through sheaves to ensure that the cable was running smoothly when he noticed slack due to the cable coming off the sheave. He grabbed the cable with his left hand for balance and placed his right foot on the lower section of the cable to push it into the sheave. The cable then broke free into the sheave, consequently creating tension on the cable, which cut his right foot and three left-hand fingers. His three middle left-hand fingers were amputated, and his right foot was partially amputated.",1
"An employee was having a pre-shift meeting with temporary employees when a temporary employee walked up to her side, hit her on the head, and knocked her down to the floor. She hit her head on the concrete floor, suffering a head laceration that required hospitalization.",1
An employee was disassembling a machine to take it out of service and dispose of it. A slab of granite was on top of part of the machine's steel frame. The employee was attempting to remove the slab of granite when it slipped out of his hands and pinched his left hand between it and the steel frame. His left pinky fingertip was amputated.,0
"An employee was carrying materials down a flight of stairs when he missed a step and fell. He dislocated and fractured his left ankle, requiring hospitalization and surgery.",1
An employee was walking near granite handling equipment when the clamp that holds the granite hit the employee's head. The employee suffered minor brain bleeding.,1
"An employee was moving a load of chicken on a rolling rack into a freight elevator. When he began to push the product into the elevator, he did not notice that the carriage was not there. The product/rack and the employee fell into the elevator. He fell 16 feet, 10 inches, hitting the product before rolling onto the concrete below. He was hospitalized with possible broken ribs, as well as lacerations on the back and left side of his head above the ear. The elevator's limit switch was not working correctly at the time of the incident.",1
"On November 14, 2017, at approximately 10:40 AM, an employee fell while disassembling a work platform at a height of over 6 feet. The employee suffered a cracked L5 vertebra and bruising to the chest and shoulders, requiring hospitalization.",1
"An employee was attempting to clear logs from a conveyor when the employee's left leg was pulled into the head shaft of the conveyor, suffering an amputation that required hospitalization.",1
"An employee took a forklift off a truck to load lumber. He drove the forklift to the driver’s side of the truck and parked it. He left the seat belt buckled. He had one foot on the forklift and the other on the truck bed when he reached over to grab a pail of roofing nails. His foot then hit the gas pedal on the forklift, causing it to go with him still straddled between the forklift and the truck bed. He then fell to the road and was run over by the forklift, injuring his hips and legs.",1
"An employee was troubleshooting defects on a coating line's topcoat station when he contacted the impression roll, and his arm was pulled through the roll and the rail. He suffered third degree friction burns to his right forearm and bicep.",1
An employee was attempting to repair a refrigeration unit when he fell approximately 12 feet to the ground from either a ladder or the top of the refrigeration unit. He suffered broken ribs and was hospitalized.,1
"An employee was standing outside of an excavator in a gore area worksite when a vehicle lost control and left the roadway, striking the employee. The employee was hospitalized with a head injury.",1
"On November 14, 2017, at approximately 11:30 a.m., an employee was walking into a patient's room when he slipped on the wet floor and landed on his back, requiring hospitalization.",1
"An employee was counting 2-inch by 4-inch boards of lumber on a table when he lost his balance and grabbed a drive chain to catch himself. The chain caught his glove, causing his left hand to be caught between the drive chain and sprocket. His left-hand fingers suffered avulsions and fractures, requiring hospitalization. The chain was unguarded at the time.",1
"An employee tripped on a pallet, fell to the floor, and suffered a left hip injury.",1
An employee missed a step in a stairway and broke the right ankle.,1
"An employee was attempting to separate frozen hamburger patties with a kitchen knife. As he applied force to the knife, it separated the patties and slipped, puncturing his abdomen to the right of his naval.",1
"An employee was repairing a metal platform that was supported by metal saw horses and jack stands. A metal shim was in place on the saw horse to level the platform. The employee noticed the shim had turned slightly, so he used a 4 lb. maul to tap the shim into its original position. The force of the strike caused the shim to dislodge, and the corner of the platform came down on the employee's index finger. The employee suffered an amputation.",0
"An employee was going up a ladder to retrieve a product when he slipped from the ladder and fell onto his back, requiring hospitalization.",1
An employee was working on a residential route picking up bulk items in a trash rear-load truck when his left middle finger was caught and crushed between a gap in a saw horse. The side of his finger was also cut open from the knuckle to the fingernail.,1
"An employee was descending a ladder when he lost his footing and fell, breaking his leg and injuring his right-hand fingers.",1
"An employee was spraying what's called a ""hot box,"" a process of strutting rubber. While spraying, there was a flash fire that caused second degree burns to his right hand and forearm.",1
"During well-servicing operations, an employee was removing an on/off tool when it slipped. His finger was then caught and smashed between the tool.",1
"An employee was training a new employee on the operation of a napkin folding machine when he heard a noise that concerned him and asked the trainee to bump the conveyor leading out of the machine. The employee went behind the machine to investigate and slipped as the trainee was bumping the conveyor. His left thumb was subsequently caught between the belt and a timing gear, damaging the bone and tissue. His thumb tip was amputated directly below the nailbed.",0
"An employee was looking for a leak in a water main. He was walking on the pipe when he slipped and bumped his head on a trench box. His back also hit the pipe. He suffered head and back injuries, requiring hospitalization.",1
"An employee was working from a servicing rig platform while tripping out pipe. The pipe became unstable and swung over the edge of the servicing platform while the employee was holding onto it. The pipe pulled the employee from the platform, and he fell approximately 15 feet to the ground. He suffered lacerations and fractures to the eye socket, jaw, nasal bones, and one of his legs. The platform was unguarded at the time.",1
"An employee was driving a pallet jack near the end of an aisle as another driver was turning into the same aisle. To avoid a collision with the other driver, the employee turned the pallet jack into some racks and suffered a 6-inch laceration to his leg. He was hospitalized.",1
"An employee was going downstairs when her toe caught the end of a pallet. She then tripped and fell to the floor, fracturing her left hip.",1
"An employee was operating a mortar mixer on a construction site when his right hand entered the mixer's moving parts, amputating two fingers. The mixer was unguarded at the time.",1
"The injured employee was working in the bag room and was disconnecting baggage carts from the baggage tractors for staging purposes. As the tractor was moved away, the still connected carts struck and pinned the injured employee on the ground between another cart. The employee was hospitalized.",1
"An employee was standing on the second floor landing of some stairs when the employee missed a step and fell face forward down the steps. The employee suffered a broken nose, broken wrist, broken eye socket, concussion, and brain bleed.",1
"On November 15, 2017, an employee tripped and fell while walking to assist a patient. The employee suffered a broken right arm, requiring hospitalization and surgery.",1
"An employee was emptying a 55-gallon drum when it fell on his left hand, causing an amputation to his middle finger that required surgery.",1
"An employee was cutting ribs using a band saw. While turning to get more product, the employee contacted the band saw blade, suffering a right index finger amputation.",0
"The injured employee was standing on the driver's side of the trailer while another employee (customer's employee) was using a forklift to pick bundles of steel pipe off the passenger side of the trailer. A bundle fell and landed on the injured employee's right leg, breaking six bones in his right heel, foot, and leg. He was hospitalized and had surgery.",1
"An employee was preparing to operate a tap hole sander when flames and heat escaped from the shell furnace, causing second and third degree burns to the employee's face and right hand.",1
"An employee was getting into a mail delivery vehicle when a privately owned vehicle struck his vehicle from behind, knocking him to the ground. His head struck a concrete sidewalk, and he suffered possible bleeding outside his brain.",1
"An employee was trying to get down to the ground from a loading dock when he injured his patella tendons, requiring hospitalization.",1
"An employee was working inside an elevator shaft when the elevator button was pressed, causing the elevator to descend. He was trying to step out of the shaft when the elevator landed on his back, fracturing his vertebra.",1
"An employee was working on a mill press when the press came down and caught his right middle finger, amputating the fingertip.",0
"On November 15, 2017, an employee was unloading landscaping stone from a conveyor belt when his right ring finger was caught and partially amputated in a machinery clamp.",0
"An employee was using a forklift to load a trailer when the truck rolled, causing the forklift to fall off the loading dock. The employee dismounted the falling forklift and fractured his right femur, requiring hospitalization and surgery.",1
"An employee was closing trailer door panels when his right finger was caught between the panels, amputating his right ring fingertip. Gloves were worn at the time of the incident.",0
An employee fell from a 6-foot step ladder while inspecting heating unit coils. The employee suffered cracked vertebrae and was hospitalized.,1
"An employee was standing on a docking plate getting ready to load a truck when the truck driver moved the truck. The employee fell and hit his head on the docking plate, then fell approximately 10 feet off the plate to the ground. He suffered bruises and cuts on the back of his head, as well as nose and mouth bleeding.",1
"The employee was moving pallets around the facility with a reach truck when he lost control of the truck and hit a pole. During the impact, his left arm was caught between the pole and truck, sustaining multiple fractures.",1
"An employee tripped and fell while walking across a rig floor, suffering multiple fractures to the left elbow.",1
"An employee tripped and fell while exiting a bathroom stall, landing on the ground. The employee suffered a gash above the right eye and forehead, requiring hospitalization.",1
An employee was guiding a bundle of scaffolding equipment into the bed of a truck when the scaffolding shifted. The employee's right fifth finger was then caught and partially amputated between the scaffolding racks.,0
"An employee was pulling a crate with a banding strap to the rear of a trailer when the strap broke. He then fell from the trailer to the ground, injuring his right shoulder.",1
"An employee was being trained to operate a powered pallet lift when his right foot was caught between a storage rack and the lift, fracturing his right lower leg.",1
"An employee was driving back to a warehouse after completing his last stop when a black SUV pulled up beside him. Someone in the SUV shot into the employee's vehicle and then sped off. He was shot in the ankle, requiring hospitalization.",1
"On November 16, 2017, an employee was using a cutting wheel to trim a filter element when the wheel amputated one of the employee's fingers.",0
"On 11/16/2017, an employee was attempting to clear a hydrate formation in a gas pipeline at a tank battery when flammable gases and vapors ignited, causing first and third degree burns to his face, the back of his head, his back, and his hands.",1
An employee tripped over a box and fell. Her thigh hit the box.,1
An employee was stacking 55-gallon drums when his middle finger was caught and lacerated in the pinch point between stacked drums. He was hospitalized.,1
"An employee was holding air scissors when the safety switches engaged and the scissors activated, amputating the employee's right middle fingertip.",0
"An employee was attempting to dislodge a piece of poly from a bag sealing machine when the machine's jaws closed on his hand, amputating his left middle fingertip.",0
"An employee was attempting to remove the valve from a fire extinguisher that he thought was empty in the waste processing cell. The fire extinguisher still had pressure, which caused it to launch across the floor and hit another employee's chest.",1
An employee tripped over the edge of a box scraper attachment and fell landing on top of the loader attachment. The employee sustained a head laceration and a broken collarbone.,1
An employee was operating an overhead crane/hoist to unload a steel snow plow blade when the load came loose from the clamp and struck his feet. He suffered a broken big toe on his right foot and fractures to the top of his left foot.,1
An employee was cleaning up a site when a sheet of plywood fell on his head. He was hospitalized with a head injury.,1
"An employee was flagging loads on location when a substructure shifted and pinned the employee's left foot, crushing it.",1
An employee was installing tape in a windup machine when the tape caught his left glove and pulled his hand into the machine. He suffered compound fracture to his left wrist.,1
"An employee was operating a jointer machine when the employee's left hand was pulled into the machine, partially amputating the middle finger.",0
"An employee was attempting to align a misaligned running belt on a conveyor system. The running belt caught his glove and pulled his hand into a nip point, injuring his right index and middle fingers and requiring surgery.",1
An employee was closing the lift gate on a delivery vehicle. His left-hand fingers were resting on the lift gate when its down switch was activated. The lift gate then partially amputated his left ring fingertip.,0
An employee was walking across a meeting room when he fell and fractured his femur.,1
"An employee was in an aerial lift using a chain fall to plumb a steel column and set a row of purlins when the lift's rise button was activated. His head was then caught between a purlin and the lift at a height of 13 feet. He suffered a laceration above his left eyebrow, a cut to his lower lip, and a hairline fracture to his cheekbone.",1
An employee was moving outrigger pads when his thumb was smashed between two pads.,1
"Employees were setting, aligning, and starting a compressor. The injured employee was attempting to diagnose a squeak heard while the compressor was running when his left hand entered the rotating area of the compressor, amputating his left thumb.",1
"An employee twisted an ankle while stepping out of a truck, suffering an ankle fracture.",1
"An employee used pliers to pull or adjust the drive belt on a conveyor belt. The belt caught hold and began turning. It then caught his glove and pulled his right thumb into the conveyor, partially amputating his thumb tip (no bone loss).",1
An employee was cutting a lemon with a knife when the blade amputated his fingertip.,0
"An employee was using a drill press. The drill bit had a burr on it and caught his glove, twisting and fracturing his right wrist into the drill press.",1
"An employee was harnessed to an order picker. He stepped off the order picker onto a forklift and started pulling away. The harness yanked him off the forklift back to the order picker causing a cracked vertebra in his neck, a  four-inch gash on his forehead and a small gash on his right thumb.",1
"On November 16, at approximately 11:00 AM, an employee was using a table saw to cut the edge off a board when the blade amputated two of the employee's fingertips to the first knuckle. The saw was unguarded at the time.",0
"An employee was moving crates with a hand truck when a crate tipped and fell. She attempted to catch it and her fingers were caught and crushed between the crate and a wall, causing an amputation.",0
"On November 16, 2017, at approximately 11:30 a.m., an employee was bending blades on a press brake when the press brake amputated the employee's left thumb.",0
"An employee had placed fabric in a dye machine that uses hot steam to help the dye. The employee came back to check on the product and stopped the machine. When the pin released to open the door, hot steam came out of the port hole and burned the employee's forehead.",1
"On November 16, 2017, an employee was descending a 6-foot step ladder when he lost his footing, slipped, and fell approximately 2 feet from a lower rung to the concrete deck below, fracturing his right tibia and fibula.",1
An employee's finger was amputated when a scissor lift raised up into a beam.,0
"An employee was part of a crew that was placing stop bars, turn arrows, and crosswalks at an intersection. A vehicle entered the work zone and struck the thermoplastic handliner, which the crew was using to apply the roadway markings. The handliner is a small hand machine that uses molten thermoplastic (430 degrees F) to produce the markings. The impact of the vehicle on the handliner caused the molten material to splatter onto the injured employee, who suffered burns to the neck, right side of the face, and right ear.",1
"An employee was draining a plug catcher when the valve arm became loose, spun closed, and hit his right leg, fracturing it. He was hospitalized.",1
"An employee dropped a granite countertop and suffered a back injury, requiring hospitalization.",1
"An employee was lowering a crane hook to attach a cable for a saw blade change when his left index finger was pinched between the cable and hook, resulting in a fingertip amputation.",0
An employee was talking to a second employee when his left middle finger was caught between a reefer reinforcement part and a fixture being worked on by the second employee. He suffered a third metacarpal tip amputation.,0
"On November 17, 2017, at approximately 1:30 p.m., an employee was moving a piece of steel that was suspended using a magnet when the magnet disengaged. The steel then fell on the employee's left hand, amputating two to three fingers.",0
"An employee was using a tool to install a thread protector on a tubular when the tool's lithium battery exploded in the non-mag tubular, sending up debris and chemicals that struck employees on the rig floor. An employee was hospitalized with face and wrist burns.",1
"A temporary employee's left hand became caught in a trash compactor, pinching and breaking a couple of fingers and lacerating the hand.",1
"An employee was repairing a tear in an SMC machine. The dam that holds back pigment was lifted and then fell on the employee's right middle finger, amputating his fingertip.",0
"An employee was walking a dog when an owl swept down from a tree. The dog pulled the employee to the ground while chasing the owl, causing the employee to fall and suffer ischial fractures.",1
"An employee dumped a load of gravel material from the dump truck he was driving. After he dumped the load, he drove off to a speed of approximately 45 mph with the truck bed erected. He began driving under a bridge when the elevated bed struck the lower part of the bridge and caused the truck to flip and land on its side. He suffered a broken nose, facial fractures, and a broken ankle.",1
"An employee was guiding a concrete form that was being removed with a crane when it became unstable and swung into the steel guide beam, knocking it to the ground with the employee. The steel beam came down on and crushed the employee's hand.",1
"An employee was trying to put cotton back in a bale press. His leg was inside the boxes below floor level. The press was in automatic mode and engaged in rotation, causing his leg to be caught and fractured between the edge of the floor and the edge of the box.",1
"The injured employee was inspecting food on a conveyor line. The employee was leaning against a top rail that was 10 feet 11 inches above the ground. As the employee stepped away from the platform, her right shoe caught the edge of the toe board and her left foot caught the edge of a plastic bin. She slid down the guard rail and fell 12 feet between the mid rail and toe board resulting in a fractured pelvis.",1
"On November 17, 2017, at about 5:30 a.m., two employees were loading a sofa onto a trailer. One employee got into the truck to move it, while the other employee stayed on the trailer while the truck was moved about 50 yards in the warehouse. While the truck and trailer were being moved, the employee in the trailer fell approximately two feet out of the trailer and hit his head on the ground, fracturing his skull and suffering a brain bleed.",1
"While climbing down a wind turbine tower using a fixed ladder, an employee fell 25 feet and struck a platform, losing consciousness and fracturing a leg, hip, and pelvis.",1
"An employee was resting her hand on a door jamb when the self-closing door closed on her little finger, amputating the fingertip.",0
"An employee was delivering a reach truck to a customer. The employee was driving the truck up a ramp when the truck bottomed out, causing it to roll down the ramp and eject the employee to the ground. The employee suffered neck injuries and was hospitalized.",1
"An employee was conducting re-roofing work while tied off to his harness when he slipped and fell 12.5 feet to the ground, fracturing both heels. He was hospitalized.",1
"An employee was observing a yard horse after replenishing hydraulic fluid to the lift mechanism when overpressure in the fluid reservoir caused a hot fluid spill. The fluid contacted the employee, causing thermal skin burns to the face and abdomen.",1
An employee was plasma torch-cutting a 55-gallon drum when it exploded and caught on fire. The employee suffered second degree burns and a broken leg.,1
"An employee was installing material strap while standing on the third step of a 6-foot ladder when the employee lost balance and fell to the floor. The employee suffered a punctured lung and broken rib, requiring hospitalization.",1
"An employee was climbing up railing to reach an upper hen box when his foot slipped on the rail. He then fell backward and hit his head on an adjacent hen cage, losing consciousness.",1
An employee was preparing to strip a column by attaching it to a crane when the column struck and fractured the employee's pelvis. The column's pins were knocked out at the time of the incident.,1
"An employee was descending a flight of stairs when he tripped at the bottom three stairs and fell, striking his head on the concrete ground and requiring hospitalization.",1
"An employee was slicing meat with a meat slicer when his right thumb came in contact with the blade and was severely lacerated, later requiring surgical amputation.",0
"An employee was operating a concrete drill rig when the fast-acting auger valve was activated, causing the rig to push downward into the earth and tip over. The employee jumped from the tipping drill rig and suffered cracked vertebrae.",1
"An employee was using a mixing drill when his glove and sleeve were caught in the chuck, causing his hand to become wrapped. His left ring fingertip was pinched and amputated.",1
"An employee was using a jack hammer to remove concrete at a job site. The employee rested the jack hammer against some pipes while he used a shovel to remove debris. The jack hammer slid off the pipe, striking and crushing the employee's left middle finger, which had to be surgically amputated.",0
"Two employees were working on a pulverizer on a second-floor mezzanine. They stopped to allow utility workers to look into a different pulverizer, which had coal dust inside it and was approximately 20 feet away. The utility work produced a spark that ignited the coal dust, generating a fire ball that traveled horizontally and burned the two employees’ arms and faces. One employee was hospitalized.",1
"An employee was standing on the landing of a set of portable stairs washing out filter cake build-up from the raised bed of a dump truck. A clump of the filter cake broke free and slid down the bed of the truck onto the concrete floor. The force of the filter cake struck the base of the stairs, causing the base to move and the stairs to topple over. The employee fell 10 to 12 feet from the stair landing to the ground, sustaining an open fracture to his elbow and multiple rib fractures.",1
"An employee was climbing a ladder to check a compressor on an upper level when the employee fell to the concrete below, suffering a concussion and fracture around the left eye.",1
"An employee lost balance while pouring concrete in a paving machine. The employee's hand was then caught in the machine, amputating a finger.",1
An employee was attempting to jump onto the running boards of a pickup truck that was starting to leave the parking area when he fell off the running board. The pickup truck then ran over and fractured his leg.,1
"An employee was rolling module tarp when the employee's right arm was caught by the module roller, breaking it.",1
An employee was cleaning a conveyor belt and sustained lacerations and a broken arm. The conveyor belt was not locked out at the time.,1
"An employee was adjusting the tarp straps on the back of a truck when he fell off the truck and hit the ground, lacerating his liver.",1
"An employee was working on the roll line machine, lost his balance and caught his right index finger in the reciprocating roller belt resulting in amputation above the knuckle. The reciprocating belt guard was not in place at the time.",0
"An employee was helping to guide a beam into place when the beam slipped, catching the employee between it and a forklift. The employee suffered chest contusions.",1
"An employee was troubleshooting a problem on a milking carousel when his jacket sleeve was caught on the running drive wheel of the carousel's motor. His right forearm was then crushed and broke, requiring hospitalization and surgery.",1
An employee was using a knife to cut insulation back on a wire when the knife lacerated his forearm.,1
"An employee stepped up on a ladder to check/see what plants needed water. While stepping down, she missed the last two ladder steps and fell to the floor, breaking bones in her right leg. She was hospitalized and had surgery.",1
An employee was repairing a drive chain on a tote fill conveyor when the conveyor started. His left middle and ring fingertips were then caught and amputated between the conveyor's chain and sprocket. The chain and sprocket were unguarded at the time of the incident.,0
"An employee was setting frames when a frame gave way and struck him, injuring his back and requiring surgery.",1
An employee was cleaning a running tub wash and amputated the left middle finger.,0
"On November 18, 2017, a temporary employee was attempting to disconnect a power supply cord for a conveyor line to unjam it. The electrical power supply cord exterior was damaged and the employee contacted unprotected live parts. The employee was electrocuted.",1
The injured employee was lifting the brow from a ship in dry dock with a tower crane. The brow moved forward as it was lifted and caused a second employee to fall off the brow onto the weather deck of the ship. The falling employee struck the injured employee pushing the injured employee into the guardrails at the top of the stair platform tower resulting in fractures requiring hospitalization.,1
"An employee was welding on a 1,000-pound steel beam when a bolt on the turnbuckle support loosed and the steel beam tilted, striking the employee. The employee suffered a broken pelvis and was hospitalized.",1
"An employee was threading woven material through the take-up device on a loom when his right middle finger entered the pinch point between the rollers while he was jogging them. As he pulled his finger back, the rollers fractured his fingertip and removed his fingernail.",1
An employee was loading pipe onto a flatbed tractor trailer when a pipe began to roll toward the edge of the trailer. The employee jumped off the trailer to avoid the pipe and suffered a right lower leg/foot fracture.,1
"An employee was walking out of a pedestrian doorway at the exact same time that a construction equipment operator was travelling out of a large roll-up doorway to the left of the pedestrian door. Once outside, the equipment operator made a sharp right turn and struck the employee's right shin, breaking it.",1
"An employee was cleaning explosive production materials from a universal loader with isopropyl alcohol when energetic material ignited, burning and lacerating his hand. PPE was worn at the time.",1
"An employee was using a hydraulic torque tool to take measurements when the tool released pressure, amputating the employee's left ring fingertip.",1
An employee was on the metal edge of a roof when his knee rolled over and he lost his balance and fell to the ground resulting in broken ribs.,1
"An employee was checking the speed of an exit roll using a tachometer when the employee's right hand was pinched between the roll and table, amputating and fracturing the second digit and lacerating the third digit.",0
An employee was attempting to release a skid steer bucket when he fell and broke his left ankle.,1
An employee was adjusting a machine for setup following maintenance when his left index fingertip was caught and amputated in a machine pinch point.,0
"An employee was under a machine's conveyor system trying to clear a jam. When the jam was free, a helper turned the machine back on. His hand was then pulled into the conveyor system, causing soft tissue trauma, swelling, and bruising that required hospitalization.",1
"An employee fell through an unsecured grate while moving fire hoses, suffering bruises and leg/foot fractures.",1
"On November 20, 2017, employee 1 was working on the ground clearing fallen branches as employee 2 was in a tree clearing dead branches. A log fell from the top of the tree, hit the ground and bounced up, hitting employee 1 in the back of the head and propelling him forward into another tree. He sustained head injuries and partial paralysis to his hands and feet, requiring hospitalization.",1
"An employee was supporting a shaft that was in a vice during repairs when the shaft fell through the vice, hitting and partially amputating the employee's left ring finger.",0
"An employee was attempting to kneel on the upper deck of a crane to communicate with his coworker in a lower section while they moved the crane. He fell from the crane onto the ground, fracturing his right wrist and forearm and dislocating his arm.",1
"An employee was using a hinged gate to push a stubborn cow onto a level ramp when the cow jolted backward and pushed the gate into the side of his head. He fell backward and his head hit the ground, suffering a laceration.",1
"An employee was walking around to ensure no one walked on lifts when he was struck by a scissor lift, requiring hospitalization.",1
"An employee was bending material on a press brake when the employee's right hand slipped into the press brake, crushing the index finger.",1
"An employee was walking from her car to the hospital when she lost her balance and fell, lacerating her left knee and requiring hospitalization.",1
"An employee was disassembling a meat cutting machine to clean it. The machine was still plugged in at the time, and a switch was triggered while the employee's hand was inside the cutting area. The machine's blade then amputated the employee's left middle fingertip (no bone loss).",0
"An employee was cleaning in the office using a step stool when she fell to the ground, breaking her leg and shoulder.",1
"An employee was unloading dishes off the back of a truck, stepped off the lift gate and fell to the ground resulting in a broken rib and back injury.",1
An employee was overseeing another employee who was removing a pipe cap when the pipe cap exploded off the pipe and struck the first employee's torso. The employee suffered broken ribs and a torn esophagus.,1
"An employee was polishing a feed screw with a handheld pneumatic grinder. The feed screw was in the grinding fixture. When he rotated the fixture, he noticed that the secondary safety pin fell out. He rotated the fixture to the vertical position and then applied upward pressure on the fixture arm. The 700-pound feed screw then fell out, knocking him to the ground and landing on his right leg and left hand. He suffered a broken and lacerated right foot, broken right ankle, broken right tibia, and lacerations to his left pinky and ring fingers that severed his tendons.",1
An employee was squatting change a patient's dressings when she suffered a left knee injury and required hospitalization.,1
An employee was repairing an asphalt paver machine when the machine's radiator cap came off. Hot water then splashed and burned his right forearm and hand.,1
An employee was using a handheld knife to cut duck when it cut his left middle finger.,1
An employee was standing taking merchandise out of box when she fell to the floor and fractured her left hip.,1
"An employee received steam burns while performing maintenance on a transmitter, requiring hospitalization.",1
"An employee was unloading a trailer when it slipped and caught his right ring finger, lacerating and breaking it. He was hospitalized overnight.",1
"An employee was driving a sit-down forklift while wearing a harness/lanyard. The harness became caught under the forklift tire, and he was pulled out of the forklift to the ground, fracturing his scapula and vertebrae.",1
"An employee fell from a roof while cleaning gutters, suffering two broken wrists. The employee was hospitalized and required surgery.",1
"An employee was using a cordless planer to cut a log. The log rolled and the employee jumped, cutting his left thumb resulting in a partial amputation.",0
An engineer was working with an estimator at a customer site. The engineer was climbing a ladder when a foot slipped and the engineer fell about three feet to the ground resulting in a broken left arm and hospitalization.,1
"An employee was wiping down a conveyor roller when the conveyor started unexpectedly and pulled his hand into the rollers. He suffered a broken radius and ulna, requiring hospitalization.",1
"A 200-pound roll fell from a turret and struck an employee. The employee suffered a broken right leg, requiring surgery and hospitalization.",1
An employee was correcting metal parts when his fingers got caught between the part he was working on and parts that were on a table. The employee fractured a finger.,1
"An employee was attempting to cross the road to the warehouses when he was struck by a traveling forklift. The forklift was carrying a pallet, and his leg was caught underneath it.",1
"While installing a waterline connection, an aluminum trench box weighing 400 lbs. was removed so the legs could be adjusted. A mini excavator was used to tilt and hold the box while the leg pins were removed. The excavator operator set the box back down on all four legs and the legs pushed up inside the box causing it to fall over and strike one of the employees on his lower body resulting in a broken pelvis.",1
"An employee was wearing gloves while using a rag and flammable solvent to clean dust and debris from a roofing lap. He lit a cigarette with a disposable lighter, which ignited the solvent on his gloves and caused burns to both hands.",1
"While operating a standup fork truck, an employee struck a racking system. The employee's right foot was caught between the fork truck and the rack, fracturing it.",1
"An employee was cutting a tree limb when it swung back and hit his leg. He suffered a lower right leg fracture and dislocated kneecap, requiring hospitalization.",1
An employee was changing a machine's router bit when the machine energized and lacerated the employee's right palm. The machine was plugged in at the time of the incident.,1
"An employee was attempting to catch and rehang a chicken in the evisceration area when his third right-hand finger contacted an oil gland machine's cutting blade, amputating his fingertip and causing an underlying fracture.",0
"An employee was sorting mail when he picked up a parcel that contained a sharp object. The object then came out of the parcel and hit his left eye, resulting in an eye loss.",1
"An employee was loading a tractor trailer from a ladder when the ladder buckled. The employee then fell to the macadam, fracturing bones in the right leg and/or ankle and requiring hospitalization.",1
An employee was using a circular saw and lacerated his right middle and index fingers. He was hospitalized.,1
"An employee was preparing to clear the waste tank of an airplane when a baggage cart struck him, breaking his clavicle.",1
"An employee was attempting to remove a part from a fracking unit using a torque wrench and a socket. The socket broke in half and the employee slipped and fell to the ground, hitting his head. He suffered a small skull fracture and brain bleeding, requiring hospitalization.",1
"An employee slipped on acorns and lost footing while operating a leaf blower, breaking a leg.",1
"An employee was pulling a rack of food out of a chiller when he slipped and fell, hitting his head on the ground. He suffered a laceration to the back of his head.",1
"A maintenance employee was checking the voltage on an automatic loading machine when another employee activated the machine. The loading arm then struck the maintenance employee, bruising the back and lung.",1
"An employee was walking across the parking lot to the main office building when she bent over to pick up a piece of trash, lost her balance, and fell. She broke her hip and required hospitalization and surgery.",1
"An employee was part of a crew that was cleaning railcars. After cleaning the last car, they were getting ready to close the back door. One of the employees had his left hand in the doorway when another employee slammed the door closed on his left ring finger. His finger was smashed, and his fingertip had to eventually be surgically amputated.",0
"An employee was using a pneumatic wrench to tighten a spring cap onto a bolt while repairing a metal shearing machine. As the employee added downward pressure on the spring, the bolt snapped, releasing the spring's compression and causing it to shoot out of containment and into the employee's forehead. The employee sustained a forehead laceration that required stitches and a minor skull fracture.",1
"An employee was cutting concrete with a cut-off saw when the saw kicked back and hit the employee's face, causing a laceration.",1
An employee was moving a bale when she stepped back and her right foot was caught between a baler and a power jack. She suffered a traumatic injury to her right ankle/shin.,1
An employee was walking between a truck and a cement truck when the cement truck ran over and crushed his right foot. His foot had to be amputated.,0
An employee was using nitric acid to strip nickel-coated diamond reclaim from a process tank when a violent exothermic reaction occurred and caused an overflow of nitrogen oxides. The employee later experienced breathing problems and was hospitalized.,1
An employee was attempting to make a U-turn on a forklift when her foot was caught and fractured between the forklift and a pallet rack.,1
"An employee slipped and fell down several stairs, fracturing her left humeral shaft and lacerating her forehead.",1
An employee was inspecting a clogged press when the clog broke loose and shot hot steam onto his legs. He suffered second degree burns to both upper legs.,1
An employee was preparing to make piping connections from a heat exchanger to a reactor when a pressurized release of liquid process material occurred. He suffered fractures and was hospitalized.,1
"An employee was assembling a store display and was trying to cut the peg board with a utility knife. He applied pressure with his right arm. When the knife went through the board, it broke loose went into his left forearm, lacerating an artery. He was hospitalized and had surgery.",1
"Groundsmen were felling a 28-foot cherry tree with a 22-inch diameter base when the tree rotated on its base, spinning and falling in the opposite direction of what they anticipated. An employee was running along the pre-planned escape route when the tree struck his right shoulder and head, knocking him to the ground where he briefly lost consciousness. The employee suffered a skull fracture. He was wearing a hard hat at the time.",1
"An employee was welding in a submarine’s sail area. The lookout area of the sail has two large hatch doors with mechanisms on both sides that can latch and lock onto the top when closed. The hatch doors are also usually spring-loaded to prevent them from falling abruptly. Neither door has the latches installed, and the starboard door’s spring was not installed to the foundation. The starboard door was raised to the closed position, with the employee working underneath. At approximately 9:20 AM, the employee completed his weld and called his supervisor over for inspection. When his supervisor began to step down into the work area from the port side, the starboard hatch door fell, striking the employee in the head and face and pinning his head between the ship’s foundation and the door itself. He suffered blunt force trauma to his head and face, requiring hospitalization.",1
An employee was using a hammer drill to install drywall when he lost control of the drill and broke his leg.,1
"A temporary employee was pulling a piece of skin out of a skinner machine when his gloves were caught in the skinner blade, lacerating his right index and middle fingers and resulting in an amputation.",0
"An employee was walking into a room that had recently been mopped when she slipped and fell on the wet floor, fracturing her left femur.",1
An employee was stepping down from the cab of a vacuum truck and tore a tendon in the right knee.,1
"An employee was standing at a hardware desk when a coworker retrieved a tool box from a shelf and it fell on the employee, causing him to fall backward onto the floor. He was hospitalized with a back injury.",1
"An employee was holding an office door open with his left hand while reaching into the office with his right hand. His left little finger was then pinched by the automatic-closing door, causing a partial amputation.",0
"On November 22, 2017, an employee was performing boiler blow-down water testing when he bumped a steam line ball valve that opened and soaked his right forearm. He suffered steam/chemical burns to his right forearm, requiring hospitalization.",1
An employee was burned on the face and hand while lighting a burn pile.,1
An employee was using a table saw to cut wood pieces when the blade amputated a portion of his right ring finger.,0
An employee was removing meat from a saw table when his right little fingertip contacted the saw blade and was amputated. The saw was running at the time.,0
"On November 22, 2017, at approximately 7:35 a.m., an employee was using a two-hand grinder to cut off bolts when the grinder slipped out of his hand and hit his left arm. The spinning cut-off wheel deeply cut into his left arm between the wrist and elbow, requiring hospitalization. The grinder guard was removed at the time of the incident.",1
"An employee was clearing scrap from the exit end of a preformer machine when his middle finger was caught in the machine punch, cutting and amputating his fingertip. The machine was guarded at the time.",0
An employee lacerated the top of the left middle toe.,1
"An employee was rolling tarps when his right arm was caught in a roller, resulting in an open compound fracture to the right forearm. He was hospitalized.",1
An employee was clearing a jam in a machine and amputated the left index fingertip. The machine was running and was not guarded at the time of the incident.,0
"During the offloading of a tanker truck, an employee's arm became entrapped in the PTO pump.  The employee suffered an arm amputation.",0
"An employee was climbing a ladder to conduct roof maintenance when the ladder slipped. The employee lost balance and fell, suffering a fractured scapula, rib, and pelvis.",1
An employee was grinding the corners off of a part using a router table. The employee's left hand slipped off the part and into the machine's blades resulting in amputation of the left index fingertip.,0
"An employee was setting up a ski run for opening day when his skis became caught in the snow, causing him to fall. He fractured his right tibia and fibula and his left elbow.",1
"An employee was repairing the hydraulic line of a lift truck when the employee's elbow became stuck between the forklift mast, causing a compression fracture and broken blood vessels.",1
"An employee was helping a powered industrial truck move a storage rack when the rack fell and landed on the employee's leg, resulting in an open fracture to the left tibia. The employee was hospitalized and had surgery.",1
An employee was preparing to weld on a bar joist when the bar joist rolled off one end of a saw horse and pinned the employee. The employee suffered a hip fracture.,1
An employee fell off a truck and broke his left wrist and cracked his heel bone.,1
"An employee was preparing rigging to lift concrete piers when his left hand was pinched between the chain and the pier as the lift was initiated, amputating a finger(s).",1
An employee was repairing a railing on a fire escape when the counterbalance came loose from the wall. The fire escape and employee then fell to the ground. He suffered back and leg injuries.,1
"An employee received an electric shock while turning off an electric breaker, requiring overnight hospitalization.",1
An employee suffered a left index finger amputation while installing punches on a press.,0
"On November 22, 2017, an employee's right hand was pulled into the gears of a commercial paper shredder. The employee's hand had to be surgically amputated.",1
"An employee was operating a forklift when the employee lost control of the forklift. It flipped over onto its right side, and the employee jumped out. While jumping out, the employee's toes were crushed by an overhead guard, amputating several toes.",1
"An employee was offloading a cargo pallet from an aircraft when his right index finger was pinched and fractured between the pallet and a dolly lock, requiring hospitalization.",1
An employee was tripping out pipes when a pipe swung and crushed his right arm between two hanging pipes. His arm broke.,1
"An employee was using a pickup truck to jumpstart a battery. He was standing on the truck bumper when the battery sparked and startled him. He then fell off the truck onto the pavement, fracturing his spine and requiring hospitalization.",1
"An employee was trying to loosen a tool with a wrench when his finger was caught between the wrench and the object he was loosening, resulting in an amputation.",0
"On 11/23/2017, at approximately 12:47 p.m., an employee tripped on an uneven curb while going into a patient's home. The employee fell and suffered a broken hip, requiring hospitalization and surgery.",1
An employee was setting up a tray for a procedure. He was opening a glass ampoule when the broken glass struck and cut his left hand.,1
"An employee lost balance and fell down the last three-to-four steps of a staircase, suffering a fractured skull and ruptured right eardrum. The employee was hospitalized.",1
"An employee was inspecting a conveyor for remaining food product after a first wash-down when he dropped his flashlight inside the machine. He was attempting to retrieve the flashlight when his left arm became caught in the conveyor belt, fracturing his ulna and radius.",1
"An employee was spinning a car wheel by hand when his hand slipped and was caught between the wheel spokes and the brake caliper, lacerating his right middle finger.",1
"An employee was organizing doors when one fell and struck the employee's right foot, causing multiple fractures.",1
An employee suffered an injury while pulling a pole butt on a concrete metering pedestal that leaned over and pinned him. He sustained rib and back injuries that required hospitalization.,1
An employee was performing maintenance on a belt when his right index finger was caught and amputated in the belt and pulley.,0
"Two employees were moving a roller. When the second employee let go of the roller, it pinched and amputated the first employee's left index finger.",0
"An employee removed product from an upper shelf while standing on a step ladder. She was then coming down the step ladder with product in her hands when she missed the bottom two steps and fell to the floor, fracturing her left knee and hitting her head. She was hospitalized.",1
An employee engaged a truck's power take-off and exited the vehicle to offload shredded paper. The vehicle started to roll. He attempted to re-enter the cab and his left arm was caught in the door causing lacerations to his left wrist and forearm.,1
"On November 24, 2017, an employee picked up a piece of plywood that was covering a hole on a roof. The plywood was not marked as a hole. He stepped forward and fell through the hole to the ground, breaking his elbow and pelvis and suffering a brain bruise and concussion. He was hospitalized.",1
An employee was installing siding on a house's exterior wall while standing on an 8-foot A-frame ladder. He was attempting to step onto another 8-foot A-frame ladder when one of the ladders fell. He then fell 6 feet to the ground and hit his head on the ladder's leg. He was hospitalized with a laceration and fracture to the head.,1
"On November 24, 2017, an employee slipped and fell while exiting a semi-truck, suffering a broken left leg and requiring hospitalization.",1
"While employees were standing for roll call in the warehouse, a temporary employee began hitting another employee with a handheld RF scanner. The injured employee received severe facial injuries and was admitted to the hospital.",1
An employee was walking toward the parking garage from the facility when the employee tripped on a sprinkler head near the sidewalk and fell. The employee was hospitalized with a fractured right patella and fractured left radius.,1
"An employee was attempting to insert a catheter on a patient when she became violent and kicked the employee, who then contacted an adjacent wall. The employee suffered a fractured hip and was hospitalized.",1
"An employee was energizing an auger when the employee dropped a tool into the machine. While trying to retrieve the tool, the employee's hand was pulled into the auger's rotating equipment, breaking it.",1
"An employee ran into a pipe fence while operating an ATV, suffering head/facial injuries.",1
"While transferring vehicles in the lot, an employee was struck by a vehicle that was being stolen.",1
An employee was painting while standing on an A-frame ladder. He slipped while stepping onto the ladder's third step. One foot stayed within the ladder while the rest of his body fell back. His back right leg landed on the floor while his left leg was stuck in the ladder. He suffered numbness in the saddle region along the medical aspect of his left thigh.,1
"An employee was preparing to put gas in his truck. As he climbed down from his cab, he slipped and fell on the edge of the gas pump's elevated concrete floor, breaking ribs on his left side.",1
"An employee was walking around his truck placing traffic cones when he tripped and fell over a cone, breaking his hip and requiring hospitalization.",1
An employee was working in the deli prep area when she slipped on grease on the floor and broke her left foot.,1
"An employee was kneeling underneath a conveyor belt to troubleshoot the tug belt loader. When he went to stand up, his left forearm contacted the moving roller instead of the stationary bar and was fractured.",1
"An employee was walking on a bar grate about to perform maintenance on a metal detector when the bar grate fell 11 feet 5 inches onto the work platform below. He landed on his feet on the platform below him, fracturing his left tibia and fibula.",1
"An employee was removing a bearing from a dough lift when a pipe fell and hit the employee's left hand, resulting in two fingertip amputations.",0
"An employee was on top of an air handler, troubleshooting it. As he came down, he twisted his ankle and fell on the cover of the air handler's pulley/belt drive, knocking the cover off of the rotating pulley system. Two of his fingers were then caught and amputated in the rotating pulley system.",1
"An employee was securing a rope around a bag on the bottom of a dust collector when the rope became entangled around the employee's left thumb, causing a laceration and amputation above the first joint.",1
"A garbage truck driver was collecting trash when a trash can became stuck at the top of his truck. He climbed to the top of the truck and fell approximately 10 feet, hitting his head on the pavement. He suffered a hematoma and was hospitalized.",1
"An employee was walking toward a sink in the bathroom when she slipped on water and fell, hitting her head on the floor. She was hospitalized with a concussion.",1
An employee was unloading from a ski lift when another skier grabbed the employee and pulled him from the lift. He fell and broke his left femur.,1
"An employee was sand blasting metal when the sand blasting nozzle came in close proximity to the employee's inner thigh, causing a laceration.",1
"An employee was shredding chicken using a machine when his right hand entered the hopper and contacted the blades, amputating his middle finger from the nailbed.",0
"On November 27, 2017, at approximately 1:45 p.m., employees were replacing bad decking and roofing. Materials were torn off and handed to the injured employee, who then placed the materials in a cart and transported them to a chute. He was receiving materials when he tripped and fell into an area where the decking was bad. He fell 60 feet to the floor below, fracturing his left leg.",1
"An employee was removing a test ball from a manhole. An excavator was lifting the test ball when it struck the employee's head, fracturing vertebrae in his neck.",1
"An employee fell from a 12-foot step ladder while installing HVAC duct work, hitting the ground and breaking his ribs.",1
"An employee was trimming a block of foam insulation with a bandsaw when his right hand contacted the blade, amputating his right thumb tip just above the nail (no bone loss).",1
"An employee was installing an overhead electrical conductor when he strained his chest, requiring hospitalization. A pull strap was not used at the time of the incident.",1
"An employee was removing a 120-gallon propane tank from a residential location. Two additional employees were assisting him. The employee determined that laying the tank down and rolling it out was the safest way to remove it. While rolling the tank, they needed to maneuver it between a shed and a tree. The space was just slightly wider than the tank (approximately 57 inches). As they approached the tree, the tank slid down against the shed, pinning the employee's finger between the tank and the shed. His left pinky fingertip was amputated.",0
"An employee was driving a golf cart for landscaping work when the wheel went into a bunker. The employee fell out, and the golf cart rolled into her, fracturing her back vertebrae.",1
"An employee was moving a bundle of decking when he fell 26 feet, fracturing his head. He was hospitalized.",1
An employee was attempting to dislodge a chuck of dried glue from a glue spreading machine when the rollers started moving and caught his finger between two rollers. His fingertip was amputated.,0
"On November 27, 2017, an employee was unloading a yard tractor trailer when the driver pulled it away from the dock. The employee then fell from the trailer to the concrete parking lot, breaking a leg in two places.",1
"An employee was on the third rung of a rolling ladder (about 2 feet above ground) when he slipped and hit his right leg on the corner of the ladder, breaking his tibia. He was hospitalized.",1
An employee was polishing a part on a polishing wheel when the part slipped or moved. One of the employee's left-hand fingers was caught and partially amputated in the wheel.,0
"An employee was using a hydraulic pallet jack to move product in the warehouse when his right hand was caught between the handle and frame of the pallet jack, fracturing bones and tearing tendons in his ring and pinky fingers. He was hospitalized.",1
An employee was attempting to unjam a wire cutting machine when the machine blades caught and amputated his right middle finger near the fingertip.,0
"On November 27, 2017, at 9:45 a.m., an employee was trying to manually roll a log in the log yard when it rolled back toward him and pinched his right pinky finger against another stationary log. His fingertip was amputated.",0
"An employee was trying to unjam a trolley chain when his fingers were caught in the belt, amputating his right pointer, middle, and ring fingertips at the distal joint. The equipment was not shut down at the time.",0
"An employee was checking on other employees' work progress on a production line and stepped up onto a metal conveyor. It tipped forward and then back onto his lower left leg/ankle, causing abrasions, lacerations, and a chipped bone to his left tibia.",1
"An employee was helping another employee move steel beams when the beams injured his left hand, causing lacerations and broken bones.",1
"An employee was disassembling hydraulic components to determine the source(s) of a hydraulic system failure. The employee removed the track drive motor assembly from a bulldozer and placed it on a workbench to perform a complete cleanout procedure on the hydraulic assembly. The employee was operating a pneumatic impact driver with the right hand to remove a bolt while supporting/holding a hydraulic servo with the left hand. The servo rotated and pinched the employee’s left index fingertip between the machined edges of the servo and the hydraulic motor housing, resulting in a distal amputation (about 3/8 inch) of the finger.",0
"An employee was making a delivery when she missed some steps and fell, breaking her left ankle.",1
"An employee was lowering a ramp from a loading dock to a tractor trailer when the handle slipped out of his hand and he fell off the loading dock to the ground, injuring his left ankle and left shoulder.",1
"At approximately 1:00 AM on November 28, 2017, an employee was backing up a poly wheel using an approximately 1-inch ratchet. As the wheel was freed, it caused the motor pulley to spin. The gears inside the ratchet then caught and pinched the employee's right pinky finger between the wrench handle and stationary conduit raceway above the area, causing an open fracture to the employee's right pinky finger that resulted in a surgical amputation at the middle knuckle.",1
"On November 28, 2017, an employee was attempting to remove a jam from a bubble manufacturing machine when the employee's right ring finger was caught and lacerated in the drive chain, resulting in a fingertip amputation.",0
"An employee was tightening bolts on a pump jack with an impact wrench and 18-inch crescent wrench when it slipped. While trying to grab the wrench, the employee's hand was slammed against the pump jack, severing the last two digits of the left pinky finger.",0
An employee was operating a press brake with a stack of 16-gauge metal on an adjacent table. The stack tipped and began to fall. The employee braced himself against the press to stop the metal from falling. The stack of metal fell and activated the press. The employee's left pinky finger was in the point of operation and amputated.,0
An employee was picking up product from a freezer when a forklift ran over her right foot.,1
"An employee was helping a customer cut an electrical cable. After the cable was cut, the customer pulled the cable and it was dragged behind the feet of the injured employee, causing her to trip and fall. She hit her head on the ground.",1
A scissor lift tipped over while an employee was inside of it.,1
"On 11/28/2017, at 1:40 p.m., an employee was palletizing items on a pallet when a forklift operator drove over her right foot, breaking it.",1
"An employee was loading a trash can onto the back of a garbage truck when his left middle finger was caught between the container and truck apparatus, amputating the fingertip skin.",0
"An employee was cutting a piece of wood with a table saw when his fingertip was caught in the saw blade, amputating the tip of his right middle fingernail.",0
An employee suffered a left ring finger amputation while cutting materials with a table saw.,0
"While standing on a ladder and installing light fixtures, an employee touched live wires and was thrown from the ladder. The employee suffered a fractured tailbone from the fall and electrical burns to the right thumb and left shoulder from the live wires.",1
"An employee fell off a ladder, suffering a possible fracture to the scapula, as well as head and neck injuries.",1
"An employee was adjusting a tilted piece of pipe that was being held by a gripper on a band saw. As he was adjusting the pipe, the gripper caught his right pinky fingertip between it and the pipe, causing a partial amputation. The employee's pinky fingertip was later surgically amputated at the nailbed.",0
"An employee was driving an ATV on the property when the throttle became stuck. The ATV then hit a sidewalk and flipped over, ejecting the employee. The employee suffered arm and hand fractures.",1
"An employee was operating a surface grinder when the grinder's rotating wheel struck the employee's left hand, resulting in amputations of the middle and ring fingers.",0
"An employee was attempting to move an extrusion head weighing several hundred pounds off a work table to a transfer cart when the extrusion head fell onto his leg, breaking it.",1
"An employee was attempting to unfreeze brakes when an empty trailer rolled over the employee's legs. The employee suffered a broken leg, lacerations, and an internal injury.",1
"An employee was exiting the bathroom when his ankle gave way and he fell, fracturing his ankle.",1
"An employee was walking down a flight of stairs when she missed a step, tripped, and fractured her ankle.",1
An employee was dumping a trash hopper into a larger bin using a forklift and crushed three fingers on the right hand resulting in a partial fingertip amputation.,1
Two employees were attempting to deliver an order to a residential establishment when an assailant shot at them. One employee was hit in the right arm.,1
"An employee was walking up stairs, missed a step, and fell down the stairs resulting in a shoulder and hip injury.",1
An employee was walking between two buildings on an outdoor level when she tripped and fell to the ground. She injured her right hip and suffered a small cut above her left eye.,1
"An employee fell while installing windows at a customer's residence, suffering a concussion and dislocated finger. The employee was hospitalized.",1
"On November 28, 2017, at approximately 11:00 a.m., an employee was installing telephone service in the basement of a residential customer. He was standing on the second rung of a fiberglass step ladder when one of the ladder hinges buckled, causing him to fall to the basement floor. He fractured his tibia and fibula, requiring surgery.",1
"An employee was working in the yard when he was struck by a reversing trailer, fracturing his hip.",1
"A temporary employee fell 15 feet from a rolling staircase ladder onto the concrete floor, breaking a hip, wrist, and rib and suffering brain bleeding. The employee was hospitalized.",1
"An employee was packing up shoes in a heavy plastic case when it fell and lacerated his right index finger. The laceration became infected, and his right index fingertip and entire middle finger had to be amputated.",1
"A stand-up forklift operator was backing out of a bay when he swung around to miss a rack behind him and struck the injured employee, who suffered a broken right leg.",1
A crew had just installed a high volume separator in an oil field when a blowout occurred. One employee sustained head injuries and was hospitalized.,1
"An employee was on stairs applying insulation above his head when he lost his balance and fell, hitting a protruding pipe and breaking his left hip.",1
"An employee was watching the control panel of a cotton gin when the lint cleaner became jammed. He turned the gin off and was attempting to remove the jam when his left hand was caught in the still turning saw blades, resulting in amputation of three left-hand fingers.",1
"On November 28, 2017, an employee had removed a microline valve that controls the flow of hot tallow when the valve leaked and sprayed the tallow (180 F) on his body, burning his chest.",1
"A forklift had just removed angled rebar from a flatbed when it struck a pothole, causing the angled iron to fall and strike an employee's left foot. The employee was hospitalized for surgery.",1
"An employee was standing on a grill cleaning the bun warmer. He stepped down onto a step stool and it slid, causing him to fall on a board (cheese) warmer and break three ribs.",1
"On November 29, 2017, at approximately 9:15 a.m., an employee was repositioning his climbing line when he fell 50 feet from a tree and fractured his right leg, requiring hospitalization.",1
"An employee was on a ladder helping to install new lighting fixtures inside a drop ceiling when the employee contacted a live bare conductor and received an electrical shock, requiring hospitalization.",1
"An employee was operating a wood-wool machine to trim wood. He was attempting to rotate a wood piece when his fingers were pinched between the wood and a machine roller, partially amputating his right middle finger and causing soft tissue damage to his middle and ring fingers. Cut-resistant gloves and safety glasses were worn at the time.",0
"An employee was standing on a pallet being lifted by a forklift to change out a light fixture. He tried to cut into a live cable with wire cutters and was shocked. He then lost his balance and fell 20 feet onto metal pipes below, suffering a head fracture, shoulder fracture, and left hand burns.",1
"An employee was operating a forklift to pick up a pallet of finished product from a stretch wrapper when the employee lost control of the forklift. The employee's right arm then struck a post guarding the shrink wrapper, fracturing the radius.",1
"An employee was putting a part on a punch press when the employee's right hand entered the press, amputating his index finger.",0
"An employee was changing a motor and gearbox on a thermoforming machine. During the process, the shaft stayed up in the platen. While he was positioning the motor using his hands, the shaft released, causing the table to go to the lowest position and the arms to raise up. This created a scissor-like motion, which amputated the employee's right ring fingertip.",0
"An employee's left arm was caught in a printer while clearing a paper jam, breaking it.",1
"An employee was putting up a banner with bungee cords from a ladder when the bungee cord broke and snapped into the employee. He then fell from the ladder and hit his head on the extended arm of an automotive hoist, suffering a head laceration and blunt trauma.",1
"An employee was performing framing operations when he tripped and then fell against a wooden midrail. The midrail broke and he fell approximately 12 feet to the ground, lacerating his head and bruising a shoulder.",1
"An employee slipped and fell while descending a ladder, sustaining broken ribs.",1
An employee was fixing a broken pipe connected to an asphalt cement truck when the pipe leaked. Hot asphalt then contacted and burned the employee's right arm and right ear.,1
An employee was on a ladder clearing a branch over some powerlines in the back of the facility when the ladder fell sideways and the employee fell to the ground. The employee suffered a broken ankle that required surgery and overnight hospitalization.,1
"A crew was pulling a second string of tubing out of a hole and was warming up a collar to break the connection. A swivel operator was spinning the swivel when an employee placed a 36-inch pipe wrench on the top part of the swivel, then placed a cheater bar on the pipe wrench. The swivel continued to turn clockwise with the pipe wrench and cheater bar attached. The employee was still holding onto the cheater bar when it started turning. The employee was then pulled and thrown off the rig floor, suffering a broken clavicle, broken ribs, collapsed right lung, and broken back.",1
An employee slipped and fell while walking on a partially constructed walkway beam. His right leg became wedged and fractured on a support brace during the fall.,1
"An employee was re-installing a 75-pound barrel on an injection molding machine when the barrel slipped. As the employee tried to catch it, the barrel crushed and amputated the employee's left pinky finger.",0
An employee was attempting to check a discharge pipe on a rotary seal machine when the employee's glove was caught by the rotary seal blade. The blade then amputated the employee's right middle fingertip.,0
"An employee was removing metal stake truck bed side gates when he tripped over the gates on the ground, dislocating his right hip and fracturing his right leg.",1
An employee was traveling through an area where a lowboy flatbed was being moved when the lowboy trailer struck and ran over the employee. The employee suffered multiple fractures and was hospitalized.,1
"An employee was descending a 6-foot ladder when the employee's foot slipped on one of the steps. The employee then fell approximately 3 feet to the ground, injuring the left wrist and left side of the hip.",1
"An employee was using a lift (most likely scissor lift) to remove plastic that was stuck on pallets when he lost his balance and fell 10 to 15 feet off the lift to the ground, breaking both wrists and shattering his knee. The lift was unguarded at the time.",1
"Employees were standing on the median edge of an interstate lane's inside shoulder, removing traffic control barrels. They were behind the guardrail when a private vehicle lost control and struck another vehicle, which left the road and hit two employees. One employee was hospitalized with a broken leg, broken finger, and head laceration. The employee had surgery.",1
"An employee was bolting a 20"" pipe when the restrainer gave way and released the pipe cap. The pipe then struck and fractured the employee's left hip socket.",1
An employee came around a corner and tripped over a hand basket that was on the floor. She fell to the floor and fractured her left hand.,1
"An employee was loading roofing shingles on the roof of a new construction residential home and had installed one anchor point on the roof. He then removed the anchor point and was scooting to a new location to reinstall the anchor when he slipped off the roof and landed on the ground below. He fractured his left arm between the elbow and shoulder, requiring surgery and hospitalization.",1
An employee was helping another employee move a concrete slab when it moved out of place and fell on the employee's right femur.,1
"On November 29, 2017, an employee was moving a piece of equipment when the employee's left pinky fingertip was pinched and amputated between the equipment and a mounting framework.",0
"An employee was climbing a ladder when it fell, causing the employee to ride it to the ground. The employee suffered a broken hip and jaw. The ladder was not 3 feet above the roof edge or tied off at the time of the incident.",1
An employee was on a roof during construction work when the employee fell through a removed section of the roof. The employee suffered broken ribs and a back injury.,1
"An employee was verifying the accuracy of field construction compared to engineering drawings when he fell to the ground, injuring his head and breaking vertebrae.",1
An employee was struck by a steel beam and hospitalized.,1
"An employee was preparing to perform a load test on a customer's uninterrupted power supply system. The employee was making the final connection between the customer battery system and a string of temporary batteries. Upon attempting connection of the two connectors, an arc flash occurred, causing second degree burns to both of the employee's hands.",1
"An employee was removing a ground from a power transmission line when either the line struck the employee or he grabbed the line from the hot stick. He received fourth degree electrical burns on his leg, requiring hospitalization.",1
"On November 30, 2017, an employee was performing a daily inspection of the spiral conveyor at the employer's retail distribution facility. To access the drive chain, the employee crawled beneath the conveyor and used his left hand to brace himself as he performed the inspection. He had a rag wrapped around his left hand that was positioned near the moving chain. The rag became entangled pulling his hand into the moving chain and amputating his left middle fingertip. The conveyor was not locked out or guarded at the time of the incident.",0
An employee was operating a table saw when the saw blade cut and amputated three of his right-hand fingers.,0
"An employee was standing on a 20-inch high chain conveyor while moving elevated paint cartons. When he went to step off the conveyor, his foot slipped and his leg became pinned, causing his leg to twist. He broke both bones in his lower left leg.",1
"An employee was attempting to clean material build-up off of a rotoformer machine's rotating belt when his glove was caught by the rotating parts, pulling his right hand into the machine and lacerating his palm. He required surgery.",1
"On November 30, 2017, an employee was laying down a single person lift to move through a doorway when he lost his grip. The lift fell on and broke his leg.",1
An employee was descending the ramp in shop #3 when the fork truck began to accelerate. The employee attempted to slow it down by pulling the throttle pedal. The fork truck continued picking up speed because the throttle pedal was stuck so the employee attempted to pull the key out of the ignition to slow it down. The employee clipped the guardrail while trying to unstick the throttle catching his foot between the fork truck and a 6-inch railing resulting in a compound fracture of the left leg and a dislocated ankle with a hematoma.,1
"An employee was helping to move a power washer when his right lower leg contacted the wheel of a forklift, lacerating it.",0
"An employee was loading raw product into a carburizing furnace when the employee's left index finger was pinched, resulting in an amputation to the finger.",0
"While chipping brush, an employee lost footing, slipped, and fell down an embankment to the ground. The employee suffered head and nose lacerations.",1
"An employee was bent down and cleaning the bottom of a door when a piece of glass fell from the level above and hit her head, causing a concussion.",1
"An employee was attempting to release an overhead door that was stuck in the raised position. The employee was pulling slack cable from around the wheel inside of the track when the door suddenly dropped, making the cable taut. The cable then sliced and amputated the employee's left middle fingertip.",0
"An employee was servicing a horizontal panel saw that showed an error code for the score blade position. As the employee manually lowered the score blade, the saw carriage tried to return to the 'home' position. The employee was then caught between the saw carriage and the floor of the facility, suffering broken ribs, a fractured jaw, and lacerations.",1
"An employee was pushing a wheeled cart by another cart when the two carts collided, causing vinyl doors to fall off the cart and onto the employee. The employee suffered a scraped shoulder and required knee surgery.",1
"On 11/30/2017, an employee was using a fax machine when she fell and broke her arm, requiring hospitalization.",1
An employee was installing a pipe into a drainage structure when his thumb was caught and amputated between the pipe and structure.,0
"An employee was walking on a roof to identify areas to work on from drawings when the employee fell 13 feet, 10 inches, through the roof to the ground. The employee broke the left leg and was hospitalized.",1
"On November 20, 2017, a temporary employee was moving a piece of metal with a clamp to a plasma cutting table when the piece of metal came out of the clamp and struck the employee's leg causing a lower right leg fracture.",1
"On November 30, 2017, at approximately 5:35 PM, an employee was walking by a scrap vacuum blower when he made contact with the cloth part of the blower, breaking the plane. The vacuum blower then caught and amputated his left index, middle, ring, and little fingers.",0
"A cement crew had finished a surface cement job and was preparing to rig down the cement head and equipment. An employee was preparing to remove the cementing head and manifold from the casing. The drilling rig crew loosened the chain boomer and lifted the casing to remove the slips. When the rig operator lifted the casing, the hook on the chain boomer broke, striking the employee in the hard hat and knocking him to the rig floor. He hit his head on the floor, losing consciousness and suffering a head laceration.",1
"An employee was attempting to remove a tool from a milling machine when the tool arm closed on the tool and pinched his left thumb, lacerating it. He was hospitalized and had surgery.",1
"An employee was positioning a piece of cardboard under a work table while two other employees held the table up when the table was dropped on top of her finger, which needed to be amputated.",0
An employee was changing a battery on a forklift when his left index finger was pinched and amputated between a spreader bar and a hook.,0
An employee was removing the sales tag from a golf card using a pocket knife when the knife slipped and punctured his forearm.,1
A temporary employee was hospitalized for lacerations and contusions to the front and left side of his face after fighting another associate.,1
"An employee was moving an outdoor security camera from one building to another using a scissor lift when the wheel ran over a curb and fell into a hole below. The lift then tipped, and the employee fell 11 feet, breaking his leg.",1
"An employee was preparing to move a steel bar stock. As he stepped back to allow a second employee to grab the other end of the bar, he lost his footing and fell. The bar then landed on him, hitting his knee and shoulder. He suffered torn tendons, requiring hospitalization and surgery.",1
A flagger was struck by a vehicle resulting in a soft tissue injury.,1
"While unloading a trailer, an employee started feeling ill and had severe cramps. The employee was hospitalized for dehydration.",1
"An employee was removing weeds from a roll topper when his right hand was pulled into the rotating rollers, crushing his hand and amputating a fingertip.",1
"An employee was helping to position a barrier when both of his feet were struck by a concrete barrier, amputating three digits on his left foot and two digits on his right foot.",1
"An employee was unloading tools and supplies from the bed of a pickup truck when the employee slipped on frost/ice that was in the bed of the truck. The employee fell off the bed and suffered a concussion, cervical and shoulder strains, and a tailbone fracture, requiring hospitalization.",1
"An employee was pruning hedges with shears while working from an orchard ladder when he fell to the ground, breaking his left wrist and hip.",1
"An employee was struck by a pallet jack while unloading a trailer, fracturing the right leg in two places.",1
"An employee fell to the ground while exiting the side door of a truck, breaking the left hip.",1
"A temporary employee operating a leaf blower stepped up on a curb, fell backwards, and hit his head. He was hospitalized.",1
"A crane was lowering a concrete plank onto the first floor of a work site while an employee was providing direction (by radio) to the crane operator. The concrete plank hit a plumbing-up cable for steel and bounced back, coming toward the employee. He then fell approximately 15 feet from the first floor to the dirt floor below, injuring his hip and breaking some ribs.",1
"An employee was crouched down beside the drilling machine and reached his hand up to lift himself up, during which time he bumped the power switch. His left index finger got past the guard and was amputated between the belt and pulley.",0
"An employee was checking air pressure using a gauge and stacking wheels when his hand entered an auto-inflator head. His left hand was pinched between the head, tire, and wheel, resulting in a partial thumb amputation.",0
An employee was removing tree parts and pieces and suffered an electrical shock that required hospitalization.,1
An employee was using a miter saw to cut a baseboard when the saw amputated the employee's pinky finger and partially amputated the ring and middle fingers.,0
"On November 30, 2017, an employee was attempting to grease a tube mill bearing when the employee's coat was caught by the mill's rollers. The employee's forearm was pulled into the machine and caught/crushed between the rollers.",1
"On November 30, 2017, an employee was webbing up a roller with paper when the employee's right hand was caught between two rollers, amputating the ring and middle fingertips.",0
"An employee was helping to move a lime train in the yard when he noticed a coal car moving on its own. He was attempting to stop the car by activating the brakes when it ran over and severely injured his left leg, requiring surgical amputation above the knee.",1
"An employee was maneuvering a boom truck when the vehicle tipped over on its side and ejected the employee, who suffered a dislocated wrist.",1
"An employee was driving a dump truck. The dump bed was raised and hit a bridge overpass, causing the truck to tumble. The employee was hospitalized.",1
"On December 1, 2017, at 1:40 p.m., an employee was cutting stock metal with a horizontal metal band saw. He attempted to align the stock metal and his hand was caught and drawn into the band saw blade, severing the three outer fingers of his right hand.",0
"An employee tripped and fell off the back of a delivery van while unloading packages, contacting the ground and suffering a laceration and fracture. He was hospitalized.",1
An employee was working at a packer machine and used a push bar to remove excess tuna from a metal plate located just beyond a conveyor belt and roller. She was attempting to grab the tuna when the packer knife caught and amputated her right index and middle fingertips.,0
"An employee was securing a flat hose to a reel on a deployment vehicle when the hose rotated. The employee was then caught between the reel and the deployment vehicle, fracturing the skull, jaw, and cheekbones.",1
"An employee was attempting to climb up an angle iron piece of a substructure when he slipped and fell backward 4 feet to the ground, suffering a spiral fracture to his right ankle.",1
"An employee was removing parts from a shot blast machine when the door inadvertently closed on his arm, fracturing his left ulna and radius bones.",1
"An employee was unloading freight from a forklift to a truck when the freight load flipped and fell on his right arm, breaking it.",1
"An employee was 11 feet up on an extension ladder, installing straps into a window opening, when the ladder moved. He lost his balance and fell off the ladder, landing over the ladder on the ground. He fractured his right leg.",1
"On November 30, 2017, an employee attached a plate clamp to the side of a 5x10 piece of sheet metal that was 0.5 inch thick. The plate clamp was connected to an overhead electric hoist installed on a jib crane. The clamp was attached to the side away from the plasma table; the clamp was manually tightened. The employee lifted the clamp and sheet up enough to clear the top of the table and moved the bottom of the sheet to the table's edge and then proceeded to lay the metal flat on the table. The employee had to make adjustments to the metal's position and stood up on the table. After the last adjustment, the employee went to get off the table and the sheet fell from the clamp. The sheet struck the back of the employee's legs as it fell to the table resulting in broken bones in the right leg.",1
"An employee was bagging potatoes when his left little finger was caught between the chain and sprocket of the bagging machine, resulting in a fingertip amputation.",0
"An employee was cleaning pipe rollers next to a pipe threading machine when his hand was caught between a pipe and the rollers, amputating his right middle fingertip.",0
"Two employees were moving a scissor lift from the third level to the fourth when another employee's head became pinned between a concrete beam and the top rail of the lift. The injured employee sustained multiple contusions to the chin, cheek bones, nose, temple and eye sockets.",1
"An employee was conducting mechanical maintenance on a flexible packing machine when packaging plastic became intertwined and was not sealing/cutting correctly. His right hand contacted the machine's cutting shears, amputating his right index fingertip. The machine was not properly guarded or locked/tagged out at the time.",1
An employee was working a restaurant bar when a customer struck the employee's face with a glass. The employee suffered a laceration and was hospitalized.,1
"On December 1, 2017, an employee was insulating an HVAC system in an attic when the employee stepped onto a foam panel and fell through the ceiling, lacerating and breaking a wrist. The employee was hospitalized.",1
"An employee was walking across a job site looking for rebar when he tried to get on a 15-inch-high concrete slab. He then tripped and fell on the edge of the slab, which had a bolt sticking out of it, fracturing four ribs and lacerating his chest.",1
An employee was unscrewing a cap to connect a hose when hot liquid asphalt sprayed and burned both of his arms.,1
An employee was loading a fuel truck when he fell and hit his head on the ground.,1
An employee was pushing a cart filled with large and heavy packages when the employee's right hand was pinched between the cart frame and a handrail. The employee's right pinky fingertip was surgically amputated.,0
"An employee was attempting to unjam a conveyor belt when his right jacket sleeve was caught in the tail guard, resulting in a cut and bruises to his right arm.",1
"An employee was diagnosing a problem with a bump truck's steering. His left hand was between a stationary object and the steering components when a second employee rotated the steering wheel. The employee's left hand was crushed, suffering swelling.",1
An employee was hooking up a heavy part for an overhead crane to hoist off a machine when the part dropped and pinched the employee's finger between a strap and a lifting eye bolt. The employee's fingertip was amputated.,0
An employee was moving bails of insulation when he began to feel ill and vomited. The employee was hospitalized.,1
"An employee was using a lifter to lift a rack of steel sheets when the lifter caught the edge of a hot block. The hot block then kicked toward the employee's left hand, pinching it between the hot block and lifter body. The employee's ring fingertip was partially amputated.",0
"An employee was replacing a cable on a truck-mounted crane when the employee's left thumb was caught between the crane's drum and mounting bracket, amputating the tip.",1
An employee was moving material and stacking it in piles when a wood splinter punctured his glove and thumb. He was hospitalized for surgery.,1
"An employee was operating a hydraulic press brake. His left hand was in the point of operation when the machine was actuated, smashing and causing trauma to his hand. He was hospitalized.",1
An employee was cutting meat with a band saw while using a push plate when the saw cut her right index finger. Her fingertip was amputated.,0
"An employee was attempting to grab an indicator near a lathe's cutting area when his shirt sleeve was caught on the lathe cutter. His arm was then pulled between the cutter and the roll, severing tendons in his arm.",1
An employee was using scissors to cut a length of twine when the scissors cut off his fingertip.,1
"An employee was exiting the excavator when his foot slipped causing him to stumble on the uneven surface. As he attempted to maintain his balance, he fell forward extending his left arm and landing on his left hand/wrist. The left wrist was fractured.",1
An employee was working at a filing cabinet when another employee entered the room and struck the employee's back with the door. He was hospitalized with body twitching due to possible nerve damage.,1
"On 12/1/2017, a lineman suffered an electrical shock and was hospitalized.",1
An employee was turning a mixer to clean it when the employee's finger was pinched and lacerated between the leg and drain plug of the equipment's oil reservoir.,1
"An employee was leaning over the edge of a self-adjusting dock when the dock dropped and caught the edge of the employee's finger, amputating the fingertip.",0
"An employee was showing a customer a wine rack on the sales floor when the rack hit the top of the employee's head, requiring hospitalization.",1
An employee was struck by the upright section of a pallet rack that fell and was hospitalized with a fracture.,1
"An employee was picking up a steel cap when the load shifted and pinched his right foot, dislocating his big toe.",1
"An employee was breaking down equipment for shut down. He was cleaning a heater when his right ring finger was pinched between the heater and an anvil, removing the soft tissue and fingernail from his fingertip.",0
"An employee was attempting to troubleshoot a clogged crane auger when a piece of drill spoil fell 55 feet and struck his hardhat, injuring the back of his head and neck.",1
"An employee was climbing a ladder to investigate a work area when the ladder moved. The employee then fell approximately 4 feet, landing on the concrete below and an empty 5-gallon bucket. The employee suffered broken wrists and vertebra.",1
"An employee was cleaning a belt conveyor with a pressure washer when his smock was caught on a rotating shaft in the conveyor. As he tried to free his smock, his hand was caught and injured in a sprocket, requiring hospitalization.",1
An employee was hospitalized with a hand injury after being struck by a fan casing while performing maintenance.,1
"On December 2, 2017, an employee had been driving a stand-up lift when he passed out and struck his head. Another employee found him unconscious. He was hospitalized with a head contusion.",1
"An employee was moving a box from a pallet to a shelf when she experienced severe pain in her lower back, requiring hospitalization.",1
"An employee was removing rocks that had been caught by a screen above a roller when the employee's right hand was caught between the rollers, partially amputating three fingers.",1
An employee was cutting down a tree with a chainsaw when the tree shifted and fell on top of the employee's legs. The employee suffered multiple fractures to both legs.,1
"An employee's finger was caught between a cable reel and a tire, resulting in a contusion that required hospitalization.",1
"An employee was operating a power head mounted to the back of a flathead when his right hand was caught between a pipe wrench and the bar on the power head, amputating his ring finger.",1
An employee was attempting to clear a bone jam on a conveyor when his frock became caught in the conveyor's pulley system. His right forearm was then pinched and fractured. The bone drop area of the conveyor was unguarded at the time of the incident.,1
An employee was lowering a lid onto an extraction basket when the lid crushed and amputated his left index fingertip.,1
"An employee was splashed by hot water while cleaning, suffering burns to the stomach, arms, and feet.",1
An employee was performing maintenance on a rotary wheel machine and attempting to make an adjustment when the employee's right arm became caught in the machine. The employee's arm had to be surgically amputated.,1
An employee was reassembling a milk/fat centrifugal separator. An overhead hoist was lowering stainless steel disks into the separator housing when the employee's left small finger was caught under the disks. The sharp edges of the disks amputated the employee's fingertip (1/4 inch).,0
An employee was walking and was struck by a forward-moving pallet jack resulting in a crushing injury to their foot.,1
"An employee was operating a front-end loader to remove ash from the box of a power house generator that creates steam for wood drying kilns. The employee was dumping the hot ash into the bucket of another front-end loader when the hot ash blew back into the cab and contacted the employee's body. The employee suffered third degree burns to the right arm, second degree burns to the left arm and both legs, and minor burns to the face. The ashes had not been wet down or cooled at the time of the incident.",1
"An employee was attempting to move merchandise from an overhead shelf while standing on a two-step stepstool. The employee then lost balance and fell to the concrete floor, fracturing the left femur.",1
"An employee was cleaning a rotating part in a lathe machine when his left gloved finger was caught in the rotating part, resulting in a partial amputation to the left pinky finger and a fractured wrist.",1
"An employee was bent over straightening a shelf of merchandise when he stood up and fell, striking his head and neck on the floor. He fractured his second and third vertebrae.",1
"An employee was stocking a room in the labor and delivery department when she tripped over the cords to a fetal monitor. She fell forward and struck the floor, fracturing her left humerus and shoulder and lacerating her lip.",1
"An employee was repairing a leaking valve when another valve opened and hot water was pumped into the system. The hot water scalded the employee, who suffered second degree burns.",1
"An employee was walking on a ground level sidewalk when he stumbled, rupturing his right quadriceps tendon and partially rupturing his left quadriceps tendon.",1
"An employee was helping to free a stuck pallet from the forks of a hand truck. She stepped up onto the pallet to use her weight to hold the pallet down. A second employee pulled on the hand truck and the momentum caused the employee to lose her balance and fall, injuring her hip.",1
"An employee twisted her left leg while walking, suffering a pulled muscle/hematoma that required hospitalization.",1
An employee was using a cutter to cut smoked ham when the cutter amputated her left thumb tip.,1
"An employee backed a trailer toward a customer's dock, then actuated the customer's dock lock and movable dock plate to bridge the height difference between the trailer threshold and dock. The mechanized dock plate would not clear the trailer threshold so that it would smoothly go into place. The employee grabbed the edge of the dock plate and attempted to lift and guide it into place. The dock plate then pinched his right hand against the trailer and tore off his right ring fingertip.",0
"An employee was using a table saw to cut a 1 x 3 foot piece of plywood when his left-hand fingers made contact with the saw blade, partially amputating the distal tip of his ring finger and lacerating his ring and index fingers.",0
"An employee was hoisting a motor with an ""A"" frame when the frame fell on and broke the employee's ankle and lower foot.",1
An employee was hospitalized due to a laceration.,1
"An employee slipped and fell in the snowy parking lot, fracturing the left ankle.",1
An employee was hospitalized after breaking her index finger in a car door.,1
An employee was operating a hydraulic press when a part shifted inside the press's point of operation. The employee was attempting to reposition the part inside the point of operation when the press activated and amputated the employee's finger. The point of operation was unguarded and the press was running at the time of the incident.,0
"An employee was working at a discharge canyon assembly and pushing two assembly pieces together when his left pinky fingertip was pinched between the pieces, resulting in an amputation.",0
An employee was cleaning a steel plate saw's chip chute when his right ring finger was caught and amputated between the clamp and the chip chute. The saw was running at the time.,0
"On December 4, 2017, an employee was rehearsing a 25-foot fall from a platform onto stunt pads when the stunt riggers had to stop her descent with the safety line. She suffered a hyperflexion injury to her lower back.",1
"An employee lost balance and fell to the floor, suffering a broken hip.",1
An employee was manually adjusting a finishing saw stop when her right thumb was caught between the stop and the roller rail. She suffered an amputation to her right thumb (nail area).,0
"An employee was driving a stand-up forklift when he turned a corner and ran into a stationary forklift. His left ankle hit the forks of the stationary forklift, suffering an open fracture and dislocation.",1
"An employee walked across a floor that was in the process of being re-waxed. She slipped on the wet floor and fell, fracturing her right elbow.",1
"While working on a printing press, an employee noticed a problem and went to investigate. The employee was behind the press with a rag when it became caught in the ingoing nip point, pulling the employee's right hand into the press. The employee suffered a right-hand de-gloving followed by finger amputations.",0
An employee was stung by a bee while closing a valve.,1
An employee was replenishing wire on a baler when the baler was engaged. The wire then looped around the employee's left index finger and amputated the fingertip.,0
"An employee was positioning an iron roughneck when his left middle finger was pinched between the lift nubbin and the roughneck, amputating his fingertip.",1
"An employee was removing a copper cell when a weld on the copper cell ruptured, spewing molten copper onto the lower half of his body. He suffered third degree burns to the front and back of his body from the waist down.",1
"An employee was adjusting the forks of an all-terrain forklift when his pinky finger was pinched between the forks, amputating his fingertip.",1
An employee was operating a press brake to fabricate seat mounting brackets when his right middle fingertip was caught and amputated between the part and the press brake die.,0
"An employee was attempting to free a jam on a conveyor when his arm was caught in the conveyor, breaking it. The conveyor was running and guarded at the time.",1
"An employee was in a full bite suit, training a police dog on bite techniques. The dog chased the employee, then jumped and bit the suit, knocking the employee off balance. The employee contacted the ground, fracturing and dislocating the lower leg.",1
"An employee was standing upright observing a trainee when a passing coworker bumped into her, causing her to lose balance and fall backwards. She was hospitalized overnight with a hip injury.",1
"An employee was loading a power cell jack onto a truck when his finger was pinched between the jack and the truck, resulting in an amputation to one of his left-hand fingertips.",0
An employee was chipping concrete from around the rollers of a truck when the drum turned and caught the employee's glove. The drum then pulled the skin on the employee's hand back from the knuckles toward the wrist. The truck was running at the time.,1
"An employee was attempting to position a 16-foot foam block on its side to load it onto a truck. The injured employee was walking by when the block fell, striking and knocking him to the concrete ground. He suffered a facial laceration and herniated disk in his neck, requiring hospitalization.",1
A dump truck driver started to back up and did not see an employee that was walking behind the truck. The truck ran over the employee's legs.,1
"An employee was using a small bending machine to bend a stainless 1/4 inch wide by 8 feet long metal rod into a circle. He was routing the material into the rollers when his fingers were caught in the rollers, resulting in a right middle finger amputation, first index (nail section).",1
An employee was dismounting from a pallet of boxes when he broke his femur.,1
"An employee was using a forklift to empty a trash bin into a larger trash container. He dismounted the forklift to open the trash bin's door. When he opened the door, the release of the trash made the bin bounce on the forklift forks. His hand was on one of the forks when the bin moved, and his left index fingertip was crushed between the bin and the fork. His fingertip had to be amputated.",0
"An employee was operating a rough terrain forklift. As he was getting out of the cab, he fell to the ground fracturing the left arm, right leg and pelvis.",1
"An employee was drilling holes in a concrete column with a hammer drill. While attempting to pull the drill out, he lost balance and grabbed onto the rotating drill bit, injuring several left-hand fingers.",1
"An employee tripped and fell while exiting a loader, breaking his leg.",1
An employee was returning to the parking garage when the employee fell from the last step onto the garage and suffered a broken left hip.,1
"An employee was installing metal decking when another employee moved the decking into place where the employee's hand was located, partially amputating a finger.",0
"An employee was loading a paper roll into a press. The employee had set the paper roll down with forklift clamps when it started to roll. As the employee tried to stop it, the force of the moving roll broke the employee's wrist.",1
An employee was working a counter when a customer entered the store and assaulted him. He suffered head and facial injuries.,1
"On December 5, 2017, two employees were felling a tree on a powerline when a tree limb fell and struck them. One of the employees was hospitalized with a fractured skull, fractured shoulder blade, and fractured vertebrae.",1
An employee was standing on a motor while cleaning a carding machine. The employee was using a manually turned wheel to traverse the vacuum nozzle across the moving cylinder when his left arm was caught in the machine. He was hospitalized and his left arm was partially amputated.,1
"An employee was standing in the basket of a scissor lift. As the basket was lowered, it lost power and hit the wall. The employee hit the side of the basket and broke three ribs, requiring hospitalization.",1
"An employee was using a meat band saw to cut a frozen pork hock when a piece of skin became caught and pushed his hand into the blade, cutting a finger.",1
"While delivering mail, an employee went up to a house to see if it was vacant. A large dog then knocked her to the ground, breaking her right hip.",1
"On December 5, 2017, an employee was attempting to retrieve a jammed piece of tubing from the drop-down rolls of a machine when the machine caught and amputated the employee's left middle fingertip.",0
"An employee was operating a gang saw when material became jammed in the planer section of the saw. He used the clutch mechanism to disengage the saw and then attempted to remove the jammed wood. However, the saw blade was still spinning and caught his coat sleeve. His right hand was then pulled into the spinning saw blade, amputating his thumb. The saw blade was uncovered at the time of the incident.",0
"An employee was injecting fluids into a well. As he disconnected the hose, caustic solution sprayed his face.",1
"An employee was trying to align cylinder connections on a cold nut forming machine to insert pins. He was using his left hand to feel for abnormalities to connect the pins when the machine suddenly activated, amputating his left thumb tip. The machine was not locked out or tagged out at the time.",0
An employee was attaching a dairy hose from a bulk tank to a tanker when the employee's right middle fingertip was caught and amputated by a latch on the truck.,0
"An employee was repositioning a displaced pallet full of cookies when the pallet shifted and fell on the employee's leg, fracturing the femur.",1
"An employee was changing a machine's name plate when the employee's fingers became caught in the ingoing nip point between the machine's plate and arch cylinders, partially amputating the index, middle, and ring fingers.",1
"An employee tripped on a curb as he was walking from the street into the front door of a building. He fell to the ground, striking his head, left shoulder, and left knee on the concrete sidewalk.",1
"An employee was removing the sling from a piece of pipe. He set the nylon sling on the ground by his feet. He stepped back, tripped on the sling, and fell, breaking his wrist.",1
A maintenance employee was cutting a molded plastic platform using a handheld circular metal saw when he lost control and dropped the saw. The saw lacerated his right leg below the knee. He was hospitalized.,1
"An employee was using a fence post driver to install temporary fence posts. After he installed a post, he noticed that it was crooked. He was attempting to straighten it when he lost his footing. The post then swung back and hit him in the face, severely lacerating his nose and requiring overnight hospitalization.",1
An employee was mixing mortar when he had trouble breathing. He was hospitalized for a possible allergic reaction.,1
"An employee was cutting a board on a table saw when the board kicked back and struck the employee's stomach, causing internal bleeding.",1
An employee fell from a ladder to the ground and suffered minor fractures.,1
An employee was attempting to clear a product jam on a breader machine's conveyor belt when he suffered lacerations to his first left-hand finger.,1
"An employee fastened a load of steel beams and was moving them with an overhead crane. He reached the location where he was going to place the load and was lowering it when the load shifted. His right hand, which was guiding the load, was pinched between two of the beams, amputating his middle and ring fingers.",0
"On 12/5/2017, an employee was using a reciprocating saw to cut a pipe while standing on a 12-foot stepladder. While he was making a second incision in the pipe, it swung down, hit the ladder, and knocked it over. He fell and his face hit the concrete floor, breaking a facial bone and causing cranium bleeding. He was hospitalized and had surgery.",1
"An employee was walking into a closet when the motion light did not operate immediately. The employee then tripped over a chair and fell to the ground, breaking an arm.",1
"An employee was servicing a forklift. When the panel was closed, it landed on his left hand and amputated two fingertips.",0
"An employee was rebuilding a puller machine and had it locked out. The employee then re-energized and started the machine. Sometime after the machine was operational, the employee dropped a wrench on the floor next to the machine and attempted to pick it up with his right hand. His left hand was then pulled into the machine's belt and pulley system. The belt and pulley system was unguarded at the time.",1
An employee was assembling a control valve assembly. His left ring finger was in the valve opening when he applied air to test the valve. The valve moved and amputated his fingertip.,0
An employee was using an overhead crane to move a bundle of product. His hand was on the hook when he started to lift the load. His left ring fingertip was then pinched off between the load rigging and the hook.,0
An employee was making adjustments on a hydraulic machine used to bend metal. The employee's hand was resting on a steel block that was part of the machine when the block moved upwards. The employee's right middle finger was then caught and partially amputated between the block and the top of the machine.,0
"An employee was using an overhead hoist to move an injection blow mold from a work bench to a pallet. The mold halves were being held together with a C-clamp. As the mold was being moved, it became entangled in the electrical cord for the hoist. The injured employee freed the mold from the electrical cord. The C-clamp then contacted the hoist beam supporting the leg and loosened, allowing the bottom half of the mold to fall. The mold struck the injured employee's left foot, lacerating it, fracturing the second metatarsal, and chipping the big toe bone. The employee was hospitalized.",1
"On December 6, 2017, an employee was repairing a weapon when the weapon discharged and amputated a finger.",0
"An employee was attempting to remove a piece of rope attached to the outer flange of a machine when her glove and right hand were pulled into the turning machinery, amputating her right middle finger.",1
An employee was setting up chuck jaws on a piece of equipment when the employee was struck by a chuck wrench. The employee's index fingertip had to be surgically amputated.,0
An employee was shutting a latching mechanism on a piece of bakery equipment when his right hand and wrist were caught in the chain and gear. He suffered wrist injuries and a fingertip amputation. The equipment was unguarded at the time of the incident.,1
"An employee fell off a ladder to the ground, breaking an arm and requiring hospitalization.",1
"After performing loading activities on top of a hopper railcar, an employee stepped off the railcar. He was wearing fall protection, but the I-beam/trolley system failed. The trolley and employee fell to the ground. He suffered fractures and lacerations.",1
"On December 6, 2017, at 5:00 a.m., an employee was adjusting the forks of his forklift after loading a trailer when another forklift operator backed into his forklift. The forklift impact fractured his left leg, requiring hospitalization and surgery.",1
"An employee was descending a flight of stairs at a new home construction site when he slipped and fell, fracturing his leg.",1
"An employee was prepping a blast pot for the next day and opened the top man-way. Pressure then escaped, causing the employee to be struck in the face by an unknown object. The employee sustained a laceration above his eyes and was hospitalized. The blast pot was not locked/tagged out at the time of the incident.",1
An employee was using a paddle to pull onions out of an onion washing machine when his right hand slipped off the paddle. His right thumb was then caught and fractured in the rollers of the machine's conveyor.,1
"On 12/6/2017, an employee was attempting to remove a linen sheet that was caught in a sheet folder ironer system when her hand was pulled into the machine and fractured.",1
An employee was operating a manual pallet jack when his right hand was caught between a pole and the pallet jack container. His right index fingertip was amputated.,0
"On December 6, 2017, at 7:30 a.m., an employee was unloading a lumber order at the front of a construction site with a truck-mounted forklift when he hit an irregularity in the ground surface. The forklift then pitched forward, slamming his forehead into the rollover protection structure cage and rocking him back into the seat. He received a forehead laceration and fractured vertebrae, requiring hospitalization and surgery. A seatbelt and hardhat were not worn at the time of the incident.",1
"An employee was working on a ladder when it slipped. As he attempted to stop the ladder from falling, his finger was caught in a clamp.",1
An employee was fueling a truck and went into the store to get a receipt. He then entered the truck before exiting it again. The truck began to roll forward and he attempted stop it when his shoe was caught on something. The truck then ran over and broke his right ankle and fractured a bone near the little toe on his left foot.,1
"An employee was cleaning out a cat room from the night before when she tried to pick up a cat, and the cat bit her left hand. The bite became infected and required hospitalization that evening.",1
"On December 6, 2017, at approximately 9:15 a.m., an employee was climbing a 12-foot step ladder to attach a retractable lanyard to a structural member when the employee fell backward from the fourth rung. The employee's head struck the concrete floor, and the employee was hospitalized with a skull fracture, brain bleed, and abrasions to the lower left calf and ankle.",1
"An employee was placing extruded rubber into a storage rack when a broken spring caused a section of the rack to fall uncontrollably, pinching the employee's right middle finger between two sections of the rack. The employee's fingertip, including the nailbed, was amputated.",0
"An employee was using a cutting torch and cutting behind a piece of metal to prevent sparks from entering other areas when some sparks got behind him and ignited his clothes. He sustained possible second degree burns to both legs and his buttocks area, requiring surgery and hospitalization. Fire retardant clothing was not worn at the time of the incident.",1
"An employee was operating a table saw to cut loins of meat. When he attempted to grab a piece of loin his right middle finger contacted the blade and was cut, resulting in an amputation.",1
"An employee was descending an 8-foot ladder when she lost her footing and fell approximately 5 feet to the floor, breaking her tailbone.",1
"An employee was moving wires from one meter to another meter when one of the wires went two-phases to gear, burning the back of the employee's hands.",1
An employee was using a grinder tool when the tool struck and injured his left hand. The grinder wheel was unguarded at the time.,1
"An employee was working on wooden barrels applying metal hoops when a hoop smashed his right middle fingertip, resulting in an amputation.",1
"An employee was repairing a skylight when he fell 15 to 18 feet through the skylight, hitting his head and injuring his foot.",1
An employee was pushing of piece of wood through a table saw to build a frame for a concrete pour when the blade caused an amputation to the employee's right ring finger. The table saw was guarded at the time.,0
"An employee was on a ladder prying on a shipping container when he slipped and fell approximately 6 feet to the ground below, breaking his left wrist and requiring overnight hospitalization.",1
"An employee was unjamming a bagging machine when the machine's jaws, which cut bags, caught and amputated the employee's left ring fingertip.",0
"An employee was getting off a skid steer when his foot slipped and became lodged between the mast and the equipment. He broke his right leg, requiring hospitalization.",1
"An employee was bringing a drink to a resident in the dining room when the employee tripped on a rug and fell to the floor, injuring the left-side ribs, knee, and hip.",1
"An employee was removing excess cotton from a lint cleaner machine when the machine turned on, amputating four of his right-hand fingers up to the first knuckle.",1
"A steel piece fell off a load and struck an employee, lacerating his face and fracturing his left ankle and nose.",1
"An employee was pouring molten aluminum into a mold when another employee activated a lever that opened the mold, spilling aluminum onto the injured employee. The employee suffered burns to the lower right leg and foot.",0
"An employee was using a pocket knife to cut a 1/4"" thick piece of rubber when the knife lacerated and partially amputated his left index fingertip.",0
"An employee was removing a fitting from an accumulator. Pressure was still in the safety bottle at the time. When he got down to the final threads, the fitting blew off, striking him in the face and neck. He suffered a facial contusion, orbital fracture, eye hematoma, and eyelid and neck lacerations.",1
"An employee was hanging drywall on a ceiling while wearing stilts when the employee fell to the floor, injuring the right knee.",1
"An employee was inside a truck trailer pulling a crate by hand using its banding straps when the straps broke. The employee fell approximately 4 feet backward off the trailer's lift gate onto the asphalt ground, sustaining a skull fracture, several broken ribs, brain bleeding and swelling, a fractured sternum, and a collapsed lung.",1
An employee fell from the truck and struck his head.,1
"An employee dropped a utensil into a dish machine near its conveyor belt system. He was attempting to retrieve the item when his right hand became caught in the conveyor, suffering a large laceration and nerve damage. The machine was running at the time of the incident.",1
"An employee was placing bags on a conveyor when a bag became stuck between the conveyor and the slide. As he attempted to dislodge the bag, the conveyor belt fractured and lacerated his right thumb.",1
"An employee was repairing a conveyor when it crushed the employee's hand, requiring surgery.",1
"Hot soup spilled, scalding an employee.",1
"An employee was grabbing samples on a railcar. As he stood up, he slipped and fell chest downward, then began to slide on the downward slope of the car. He then attempted to turn his body and grab something but went over the side of the car. The webbing attached to the locking snap hook on his safety harness D-ring popped, and he felt a jerk before landing on the ground feet first and suffering an injury.",1
An employee was bending a pipe with a vice when he lost his grip and balance and fell onto a workbench. He suffered a fractured rib and collapsed lung.,1
"An employee was sitting on a dock when he dismounted the dock and landed awkwardly on his left ankle, breaking it.",1
"On December 7, 2017, at approximately 3:30 PM, an employee was taking parts off a combine and placing them in a pallet box when the employee stepped down into a pallet box and fell 6 feet to the ground. The employee fractured the transverse L1 vertebra, requiring overnight hospitalization.",1
An employee was climbing down a ladder when he slipped and fell. He broke his foot and was hospitalized for surgery.,1
"An employee was climbing a fixed ladder to access a roof to repair an HVAC system when the employee fell from the ladder, breaking vertebrae and the pelvis. The employee was hospitalized.",1
An employee broke several bones as a result of a fall.,1
"An employee was attempting to free a jammed hammer mechanism on an electric hammer drill. He was holding the drill motor in his right hand and the drill bit in his left hand when he inadvertently pulled the operation switch. The bit began to spin rapidly in the employee’s left hand and caught his glove, which quickly tightened around his ring and pinky fingers. His ring fingertip was fractured and partially pulled off, requiring surgical amputation up to the first knuckle. His pinky finger was lacerated and required stitches.",0
"An employee was troubleshooting a dryer transfer system when his hand entered the airlock and contacted the rotating blade, partially amputating his third and fourth fingertips.",0
"An employee was stepping off the back of a truck when the employee missed a step and fell to the ground, suffering rib fractures.",1
Employees were engaged in horseplay and one employee suffered a head injury when his head hit the wall.,1
An employee was cutting a 2x4 with a circular saw when the saw blade cut and partially amputated the employee's left middle finger.,1
An employee was repairing fiberglass bathtubs on roller conveyors mounted to the floor. He was attempting to cross over the roller conveyor when he landed in a way that fractured his tibia and fibula.,1
"An employee was pouring concrete from a hopper into a pre-cast concrete mold when he was caught between the hopper and mold, fracturing his pelvis.",1
An employee was setting up the rewinder and suffered a right thumb amputation while spooling fiber cable.,0
"An employee was spreading out peanuts in a hopper, slipped and caught his hand in the bottom of the hopper resulting in amputation of the left middle fingertip.",0
An employee was stripping concrete column forms. He was climbing up a ladder to a platform when he fell approximately 6 to 7 feet to the ground.,1
"Employees were removing a piece of switchgear weighing more than 1,000 pounds when it fell forward, striking and pinning an employee between it and a wall. The employee was hospitalized with a fractured clavicle, fractured scapula, fractured vertebra, and fractured ribs.",1
"An employee was holding a grade stick for a foreman to check the grade of elevations when an excavator driver rotated the equipment, causing the excavator bucket hook pipe to be spring loaded. The hook pipe then struck the employee, who sustained a contusion to the left side below the waist/hip.",1
"An employee was carrying empty boxes when she tripped between two pallets and fell, breaking her hip and requiring hospitalization.",1
An employee was driving a concrete mixer. He exited the truck and fell due to an apparent heart attack.,1
"On December 7, 2017, an employee was using a table saw to cut a wooden board when the board kicked back at him. He then suffered a left index finger amputation and broken middle finger.",0
An employee was pivoting a hand truck to move a refrigerator when his leg gave way and broke.,1
The employee contacted the rotating blade of a table saw resulting in amputation of the left thumb below the nail.,1
"Employees were using an excavator to dig near a residential home when the excavator operator dug into an underground powerline, shocking a nearby employee. The employee was knocked backwards and received a concussion.",1
An employee was performing a change-over from a concert setting to a hockey setting. The employee was moving a load of materials when the load shifted and partially amputated the employee's right ring finger.,1
"An employee was mixing cement using a mortar mixer. The employee started scraping the mortar patches inside of the mixer when the rotating paddles impacted the right hand, fracturing and lacerating it.",1
"An employee was removing a chassis from a push cart and placing it on the ground when the chassis shifted and caught the employee's right thumb, amputating the tip.",0
"An employee was rolling belts by hand when the employee's hand was caught between a belt and pulley, partially amputating the right pinky.",0
"An employee was driving a tractor with a pull in the sales lot. The pull, which was carrying carpet, hit power lines, and fell down, striking the employee's head.",1
An employee was helping to remove a tree in a right-of-way when he tripped over debris and struck his head on a log. He suffered a skull fracture.,1
"An employee was carrying window blinds in a hallway when she tripped and fell to the floor, breaking her ankle and requiring surgery.",1
An employee was clearing a board from an auto edger when the employee's coat was caught in a sprocket. The rotating equipment then amputated the employee's arm.,1
"An employee tilted a trash hopper to empty it. When the trash hopper returned to its original position, it pinched his finger. As he pulled his hand out, his fingertip was amputated.",0
An employee was threading paper into the printing press and caught their fingers in a pinch point resulting in a fractured left ring fingertip.,1
"An employee was using an overhead crane with chain slings to flip a 24 X 16 X 20-inch mold weighing 1,500 to 1,600 pounds when the employee's left hand was caught, amputating the middle finger.",0
"An employee was using his right hand to feed a piece of metal into an iron worker metal forming machine and his left hand to operate the foot pedal, which had been moved up to the work surface near the machine. His left hand then entered the vertical metal forming device and was compressed, fractured, and lacerated.",1
"On December 8, 2017, at 1:00 p.m., an employee was riding on the back of a trash collection vehicle, traveling at 13 miles per hour down a straight stretch of road, when the truck hit a bump and launched the employee into the air. He landed on both feet and then rolled onto his shoulder. He fractured his right ankle and was hospitalized for surgery.",1
"An employee was feeding 2x4s into a pop-up saw by hand when his right hand contacted the blade, amputating his right thumb below the fingernail. The saw was guarded at the time.",0
"An employee was inspecting a possible crack in a crane track when the crane operator swung the crane. The employee was crushed between the counterweight of the crane and a handrail, breaking two legs and requiring hospitalization.",1
"An employee was disconnecting a load from a powered industrial vehicle when the employee's right pinky finger became pinched between the vehicle and a connection bar, crushing and amputating the fingertip.",1
"An employee was working on the second floor of a new construction building installing wrap on the outside walls when a guardrail broke, allowing the employee to fall approximately 12 feet to a lower surface. The employee suffered multiple leg and feet fractures.",1
An employee was setting up a horizontal mill when his left pinky finger was caught between the table and the bench indicator tool. Three-quarters of his finger were amputated.,0
"An employee was at the top of a hill reversing a truck on the left side of a ramp when the truck rolled off the ramp. The employee suffered a collapsed lung and broken ribs, requiring hospitalization.",1
"On 12/8/2017, at 4:00 p.m., employee #1 was on a truck containing racks of 25-foot sucker rods helping to offload the rods to employee #2, who was stationed on the ground. Employee #1 dropped his end of the sucker rod, which struck the ground. The impact caused a wave motion to propagate through the sucker rod, which then caused the end that employee #2 was holding to fling out of his hands in an upward motion, striking and lacerating his nose and forehead.",1
"A temporary employee's left hand was inside a rotary valve when it closed, amputating three fingers and requiring hospitalization.",1
An employee's finger was caught in a trim press dye while trying to clear a jam resulting in an amputation injury.,0
"An employee was using a rolling cart to move heavy material stored in a wooden crate. The employee's hand was on the side of the cart while steering it. The employee's finger was then pinched between a metal frame on a door and the wooden crate, amputating the fingertip without bone loss.",0
"An employee was rigging down a top drive on a drilling rig when a slide that was connected to a torque tube came down on the employee's left hand, amputating the middle finger just above the middle knuckle.",0
"An employee was attempting to manually clean a tumbler when the employee's right hand became caught in the tumbler, amputating the index fingertip. The tumbler was in operation at the time.",0
An employee was attempting to retrieve a piece of metal from a folding machine when he pressed the foot pedal. The machine then came down and crushed his right forearm.,1
"An employee was using an airless sprayer when the employee's sleeve became caught in the sprayer, which then injected oil-based asphalt paint into the employee's left index finger. The employee's finger became swollen.",1
"An employee was changing a die on a press brake when the press brake was activated. The employee's finger was caught in the point of operation, partially amputating the fingertip.",0
"An employee was on a ladder cutting a ceiling grid down from the ceiling. As he snipped a wire, a portion of the ceiling fell and swung, hitting the ladder. The ladder started falling, and the employee put his right arm out to break his fall. When he hit the ground, he broke his right wrist.",1
"On December 8, 2017, at 9:15 p.m., falling pallets knocked over bakery tables, which then struck an employee's stomach.",1
"An employee slipped and fell on a snow-covered walkway between buildings, hitting the back of his head on the concrete.",1
"An employee was on a roof removing old roofing materials and throwing them into a dump truck in the driveway below. He fell approximately 17 feet from the roof, and a coworker found him laying on the concrete driveway. He suffered a head injury and was hospitalized.",1
An employee was drilling weep holes in a window sash and drilled through the material and into his glove. The glove became entangled and torqued his thumb resulting in a complex fracture of the left thumb. A fingertip amputation was also noted.,0
"An employee was using a cutting torch to cut a clutch from the bottom of a truck when hot grease inside the clutch box melted and dripped onto the employee's face, burning it.",1
"An employee slipped and fell to the floor while moving a box. The employee's head hit the floor, suffering a concussion that required hospitalization.",1
"An employee was fixing an overhead pipe while standing on an 8-foot step ladder. He lost his balance and fell from the ladder to the floor, breaking his left wrist and left ankle.",1
"An employee was walking to the staff break room when she slipped on water in front of the refrigerator, lost her balance, and fell to the floor. She dislocated and fractured her left hip, requiring hospitalization.",1
"An employee was driving a forklift during forklift certification and practical evaluations when the employee lost control of the forklift and hit a pallet racking system. The employee's leg was outside of the forklift at the time and suffered an injury, requiring hospitalization.",1
"An employee was operating a high-reach forklift when the employee's foot became crushed between a door guard and the lift, fracturing the ankle and foot.",1
"On December 9, 2017, at approximately 1:00 p.m., an employee was attempting to remove a piece of meat from a hook when the employee's right index fingertip was pinched between the hook's handle and a conveyor siderail, resulting in an amputation just below the fingernail.",1
"An employee was troubleshooting electrical fuses and relays on the driver's side of a skid steer when another employee rotated the bucket to actuate the hydraulics. The skid steer started moving and lurching, then knocked the employee over and ran over his ankle and foot, fracturing his right ankle and dislocating his right foot.",1
An employee suffered a cardiac incident while delivering a load to a customer causing him to fall out of lift gate and hit his head.,1
A temporary employee was making a sharp U-turn while driving a golf cart (delivery vehicle) when he tried to prevent the cart from tipping over using his left foot resulting in broken bones in his left leg.,1
An employee was moving a portable heater when his finger was caught in the grating protecting the fan blade on the rear of the heater. His left ring fingertip was amputated with no loss of bone.,0
"An employee was using an ""A"" frame ladder to open the cargo hatch of an airplane when he lost his balance and fell to the ground, breaking his right ankle and requiring surgery.",1
An employee was using a wet shovel to clean molten copper when an explosion occurred. He suffered burns and was hospitalized.,1
"An employee was attempting to unjam a tube conveyor when the employee's leg was caught between the material and a roller, fracturing it below the knee.",1
"An employee was using a towel to clean a roller underneath a machine when the towel was caught in the roller, pulling his arm into the machine. His forearm suffered multiple fractures. The machine was not locked/tagged out at the time.",1
"An employee was backing a forklift out of a racking location when the forklift cage became caught on a post and broke, causing it to move forward. The employee was then pinned between the forklift seat and steering wheel, suffering a fractured tibia and fibula.",1
"An employee slipped and fell to the same level surface while cleaning cars, fracturing the lower left leg.",1
An employee was hooking/rigging a forklift when the forklift operator began the lift. The employee's left ring finger was then caught and crushed by the forklift chain. His fingertip had to be amputated.,0
"On December 9, 2017, an employee was turning a valve with a wrench while standing on a ladder when he lost his balance, fell from the fifth rung, and fractured both bones in his lower leg.",1
"An employee was on an 8-foot step ladder passing a broom up to another employee when he fell to the ground, fracturing his left collarbone and ribs and suffering minor brain bleeding.",1
An employee was in a bucket truck restoring power to a residence when the employee contacted the electrical powerline and fell approximately 30 feet to the ground below. The employee suffered five broken ribs.,1
"An employee was responding to a service call at an apartment that had lost electricity. While using a screwdriver to check the outdoor breakers, the employee received an electric shock, resulting in third degree burns. The employee was hospitalized.",1
An employee was at a customer's home servicing their satellite when he either fell from a ladder or fell to the ground while walking. He was hospitalized with a brain hemorrhage.,1
"An employee was cleaning bread slicer discharge using the blade when she contacted the blade edge, lacerating her fingertip and amputating the small tip of her finger pad and nail.",0
"An employee was operating a chop saw when it cut his right index fingertip, causing a disarticulation injury.",0
"An employee was operating a vacuum truck when the hose became disconnected and began spraying hot fluid. A fire and then explosion occurred, and the employee suffered serious burns.",1
"An employee was on top of a concrete pile looking inside the grout box to ensure there was enough concrete against the existing header. He had placed his hand on a concrete plow cable to brace himself when the operator moved the equipment, causing the cable to move and catch the employee's hand between the concrete and the cable. His left pinky finger was nearly severed.",1
"An employee slipped and fell in a freezer, breaking her ankle.",1
An employee was setting up an extrusion line and attempting to grab film when the employee strained the lower back muscles. The employee was hospitalized with a lower right-side back strain.,1
"An employee was maneuvering a mud bucket away from a rotary table area when his right little finger was smashed between the mud bucket frame and a mast leg, resulting in an amputation.",1
"An employee was getting out of her vehicle when she slipped and fell on a patch of ice, breaking her ankle.",1
"An employee was putting a cylinder in a deck when the cylinder would not set into the deck properly due to a misaligned bearing. He used a pry bar to raise the cylinder and realign the bearing. He was attempting to align the bearing cap when the pry bar slipped and the cylinder fell, causing the cylinder bearing cap to close on his left index finger. He suffered a left index finger partial distal phalanx amputation.",1
"An employee was walking on an icy sidewalk in front of a residence to deliver mail when she slipped and fell to the ground below, fracturing her left ankle.",1
"An employee was walking down an icy, snow covered driveway after delivering a package and slipped and fell resulting in a fractured right femur.",1
An employee was opening the back door of a delivery truck when the truck moved forward. The employee then fell to the ground.,1
"An employee was caught between the forks of a forklift and a building, suffering crushing injuries to the abdomen.",1
An employee was removing wood from a conveyor when the employee's left arm was caught between the wood and conveyor frame. The employee's left hand was amputated just above the wrist.,0
"While unloading a personal vehicle by hand, an employee stepped back onto a curb and fell at the same level, fracturing the right femur and requiring surgery.",1
"An employee was operating an auto fastening machine when the machine failed to complete a tool change. The employee was attempting to troubleshoot the problem when the sensor cleared and the machine cycled, catching, fracturing, and puncturing the employee's right hand. The machine was not in stop mode at the time of the incident.",1
An employee was surfacing the road for access and got too close to the edge of the road. The roller began to roll down the hill and the employee suffered a back and pelvis injury.,1
"An employee was operating a lathe when the employee's left hand was caught in the lathe, resulting in an amputation of the middle and ring fingers.",0
"An employee was repairing/replacing the insulation on a chiller unit when he attempted to lift a pedestal fan to dry the chiller's paint. He then suffered a bulging disc and pinched nerve in his lower back, requiring hospitalization.",1
"Two employees were spotting for a sand truck. The front spotter lost sight of the back spotter, who was then pinned between the truck and a sand silo. He suffered a hip injury and herniation, requiring hospitalization.",1
"An employee was trying to steady a load when his hand was caught between the load and the base, amputating two fingers above the second knuckle.",0
An employee was cutting a ring tool with a handheld grinder when the grinder wheel exploded and a piece of the wheel lodged into and lacerated his lower right leg.,1
"An employee was moving cylinders onto a delivery truck when the employee lost footing and fell between the truck and loading dock, suffering a head contusion and muscle strain. The employee was hospitalized.",1
"An employee was checking tags on rods and moving a rod clamp when a suitcase, which held the rods, slipped. The employee's left thumb/index and pinky fingers were caught and smashed between the clamp and bridle. The employee suffered amputations to half of the index finger and the pinky fingertip.",0
"While unloading a skid from a trailer, an employee tried to move the skid into place so a forklift could lift it out of the trailer. The skid then shifted and smashed the employee's right index finder between the skid and the fork, partially amputated the last distal joint of the right index finger.",0
"An employee slipped on ice in the parking lot and fell to the ground, suffering a head injury and requiring hospitalization.",1
"Three employees were lifting a piece of pipe when it fell. One employee tried to catch it, but it fell on his hand and smashed his pinky finger. He was hospitalized and had surgery.",1
An employee was attempting to release refrigerant gas from a cooling unit when the gas began to release from a valve and hose. He attempted to stop the escaping gas and suffered burns to the thumb and a forefinger on his right hand and a forefinger on his left hand.,1
An employee suffered a partial left thumb amputation while operating a manual pallet jack.,0
An employee was adjusting the brake on a running screw machine when the employee's right middle finger was caught and partially amputated in the brake.,0
An employee was in her car in the parking lot when another employee stabbed her chest and left hand.,1
"An employee was running a machine when one of the rings would not enter the roller correctly. As the employee attempted to steady the ring, his glove became caught between the two rollers, causing his hand to be pulled into the machine. His left pinky finger was avulsed and amputated to at the first knuckle.",0
"An employee was pulling a trailer away from a dock when the dock plate became stuck between the trailer and dock. The employee then used an aluminum pipe to dislodge the dock plate. It fell and struck him, pinning his right leg to the wall of the dock.",1
"An employee was moving dunnage when a stack of lumber fell over and struck the employee, breaking the left leg.",1
"An employee was installing framing for a concrete system when a forklift load shifted and struck his left leg below the knee, breaking it and requiring hospitalization.",1
An employee was dismounting from his truck when he fell and struck a concrete ramp below.,1
"An employee stopped at a fuel station to refuel the tractor he was operating. Upon exiting the tractor, he slipped and fell to the ground, fracturing his back and pelvis.",1
"An employee was climbing down a cross frame to the top of a pier when the employee slipped and fell approximately 7 feet to the pier, suffering a head injury.",1
"An employee delivered shingles to a roof and was using a ladder to exit the roof when the employee slipped on a rung and fell to the ground, fracturing a tibia.",1
"While using a press brake to form a sheet metal component, an employee attempted to reposition the plastic die cover. The press brake activated while the employee's left hand was in the point of operation, amputating three fingers.",1
"An employee slipped and fell on a patch of ice while taking trash to a dumpster, fracturing the right ankle and requiring hospitalization.",1
"An employee was using a solvent cleaner to clean a filter housing and prepare for painting when he suffered from chemical exposure and dizziness, requiring hospitalization.",1
"An employee was removing a ball joint from a vehicle when his hand slipped and contacted the metal covering, seriously lacerating his left hand.",1
"An employee locked out an in-liner machine system and attempted to lift the flask and set it back on its designed track. The flask slipped off the side of the track that was supporting it, and the employee's finger was caught between the track and the 300-pound flask, resulting in an amputation.",1
"On 12/11/2017, at approximately 12:30 p.m., an employee was operating a rubber molding machine when he attempted to remove a left-over piece of rubber from the heated top plate. The employee's gloves made contact with the heated plate and melted to the surface. Before he was able to free himself, the molding machine began operating and pinned his right-hand fingers between the top and bottom plates for several seconds, amputating all four fingers and his thumb.",1
"An employee tripped and fell while walking up a flight of stairs, fracturing her arm while trying to brace her fall.",1
An employee was removing roll paper from a machine when two blades came together and amputated the tip of her thumb.,0
"An employee was attempting to access the roof using a 14-foot fixed ladder. When he attempted to open the roof hatch, the weight of the snow on the hatch would not allow the hatch to open. The unexpected force caused the employee to fall off the ladder. He suffered three broken ribs and a ruptured spleen that required surgery and hospitalization.",1
"An employee was approaching a skid steer from behind when the skid steer turned and struck the employee, crushing the employee's foot, ankle, and lower right leg. The employee suffered blunt force trauma and lost part of the lower leg.",1
An employee was performing preventive maintenance on a steam tunnel. The employee was greasing a fitting and attempting to spin the fan using the pulley belt when the employee's right pinky finger was caught and amputated between the belt and pulley.,0
"While cleaning the expanding machine, an employee was about to replace the dies when he smashed his left thumb between the dies. He was hospitalized and had surgery.",1
"An employee was helping to remove an abandoned 20-foot section of 10"" pipe from a trench. When the pipe was free from the trench, it swung around and hit the employee's lower leg, breaking it and requiring hospitalization.",1
"An employee was installing 2x4 light fixtures into a ceiling grid. He measured how much tie wire he would need to secure the fixtures' catty corner onto the ceiling grid. He realized he would need a taller ladder so he started coming down and decided to cut the wire he had measured out. The wire spool was sitting on top of the ladder he was using. When he cut the wire, the end sprang upwards and went between the bottom of his safety glasses and his face, puncturing his right eye.",1
"An employee was helping two other employees put a belt on a pulley when his right index fingertip was caught and smashed between the pulley and the belt. As he pulled his hand away, his fingertip was amputated. He was hospitalized.",1
A temporary employee was driving a pallet jack and attempting to make a U-turn in an aisle when her finger was caught and partially amputated under a rack shelf.,1
"An employee was cutting windows in the sheet metal of a tank using high-pressure water (40k) when the equipment's magnet, which holds the cutter to the tank, failed. The water then lacerated the employee's right thigh above the knee.",1
"An employee suffered a left pinky finger laceration, requiring hospitalization when he caught his finger in a door while cleaning.",1
"An employee was unloading a shower door from the back of a rental truck when the door fell onto the employee's foot, breaking it. The employee was hospitalized overnight and had surgery.",1
An employee was using a radial arm saw to cut 12-inch pieces of wood when the saw cut and amputated the employee's left thumb tip.,0
"Employees were performing demolition work on the second story of a residential property when an employee fell from the roof and landed on the ground approximately 20 feet below, breaking the left leg.",1
"An employee was disassembling hot tar tanker pipes when the hot tar splashed both of his lower legs, causing first and possible second degree burns.",1
"While walking into work, an employee slipped on ice melt on the stairs. The employee suffered possible cracked vertebrae and was hospitalized.",1
"An employee was carrying a saw down a ladder when he lost his footing and fell from the third step to the floor, breaking his left tibia and fibula.",1
An employee was using a circular saw to cut a wooden board when the saw slipped and cut his left-hand palm area. He was hospitalized overnight.,1
An employee was greasing an overhead conveyor chain when the employee's left index fingertip was caught and amputated between the chain and sprocket.,0
An employee was cleaning debris off a roller conveyor when his left middle fingertip was caught in the chain and sprockets of the machine. His fingertip had to be amputated.,0
"An employee was struck by a taxi cab while crossing the street, suffering a fractured left leg.",1
An employee was setting up an air valve when the valve shifted and injured the employee's thumb.,1
An employee was pressure testing a tanker truck and adjusting the tanker's wash-out cap when the cap contacted the employee's face. The employee suffered a broken jaw and lacerations to the chin.,1
An employee was unloading tires from a truck at a warehouse when he fell 2 feet out of the back of the truck and hit his shoulder and neck on the ground. He was hospitalized overnight.,1
"An employee was found on the floor. He fell to the ground and struck his head while pulling out a floor scrubber, suffering a brain aneurysm.",1
"An employee was operating a machine and trying to place a block of wood to hold the machine rail in place when the machine kicked out the block of wood. The employee's hand then went under the hood, resulting in a left ring finger amputation.",0
"While cleaning a mix pan, an employee attempted to lower a roller into the pan. The employee's left index fingertip was then caught and amputated between the roller bracket and the pan.",0
"An employee used brake cleaner to remove built-up grease from a cordless power tool. When the employee attempted to use the tool, it ignited, burning the employee's face and arms. The employee was hospitalized.",1
"An employee was in a robotic cell attempting to clear slag from a welding tip when the robot energized. The robotic arm struck and pinned the employee, fracturing and dislocating the employee's left hip.",1
An employee was taking material out of a freezer and walking by a bread rack when she tripped over shelving that was leaning against the bread racks and fell to the floor. She broke both knees and was hospitalized overnight.,1
"A temporary employee was inside a truck standing on two boxes of vinyl siding when the employee fell to the truck floor, suffering a hip fracture and requiring hospitalization.",1
An employee was helping to run a twisting machine when the employee's right fourth fingertip was caught and amputated in the machine.,0
An employee was using a sledgehammer to drive a stake when he felt a pop and pain in his lower back on the left side of his tailbone. He fell to the ground and was unable to move his left leg. He suffered a herniated L5 disk.,1
"On December 12, 2017, an employee was driving a mini roller compactor on a roadway when the unit drove off the edge of the roadway and turned over into a ditch. He hit his head on the compactor's roll-over protection and was hospitalized with a concussion.",1
"Two employees were driving powered industrial vehicles in opposite directions when they collided. One of the employees had a foot outside of the vehicle at the time of the collision. The employee suffered a broken foot/ankle, requiring surgery.",1
An employee was taking vibration readings of bearings in a fan when his right index finger entered the running fan and was fractured.,1
An employee was placing a string of paper into a winder when his fingertip was caught and amputated in a pinch point.,0
"An employee fell over 12 feet from the building he was working on to the ground, breaking his left elbow.",1
"An employee tripped on carpet while walking and fell to the floor, suffering a hip injury.",1
An employee was taking off her boots in a patient's home when she slipped on the wet floor and fractured her ankle.,1
"On 12/12/2017, an employee was attempting to remove a cut part that had tipped up on the end of a plasma cutting machine when the machine moved unexpectedly and caught his right hand between the part and a gantry. His index and middle fingers were partially amputated.",1
"An employee was helping to manually accommodate carbon sheet metal plates when a pipe fell on him, fracturing his right ankle and fibula. He was hospitalized.",1
"An employee was hooking up propane lines for heat at a construction site when propane spewed from the lines, covering the employee's hands. Another line then flared, flashing back at the employee and causing minor burns to the head. The employee's hand suffered frostbite from the propane, requiring hospitalization.",1
"An employee was delivering a 320-pound door when he strained his back, requiring hospitalization.",1
"An employee dismounted his stand-up walkie and was picking a part out of a bin. He had parked next to another stand-up walkie. He was standing between the two stand-up walkies when the second walkie moved, crushing his leg between the two and breaking his fibula.",1
"An employee was screwing a fascia into place while standing on an 8-foot portable ladder when he fell approximately 4 feet off the ladder, injuring his head and breaking three ribs.",1
"On December 13, 2017, an employee suffered carbon monoxide poisoning while pressure-washing a car wash, requiring hospitalization.",1
An employee was outside helping a plane depart when he slipped on ice and/or snow and fell to the concrete pavement. His head hit the pavement and he was hospitalized.,1
An employee fell from approximately the fourth rung of a six foot ladder while waxing a boat hull. The employee fell onto a steel I beam used for in/out storage and suffered three fractured ribs and five small broken pieces of bone on the spine.,1
An employee was helping a technician rotate a blow molding machine when his finger was caught and amputated in a locking shaft.,0
"An employee was using a clamp truck to load rolls of paper onto railcars. He was wearing his seat belt and hard hat at the time. He was driving in the forward position when he lost control of the vehicle, which fell on its left side. He suffered a 2-inch laceration behind the left side of his ear, requiring hospitalization.",1
"An employee was setting a piece into a plate press when the plate press shifted. His left middle finger was then caught between the plate and the plate press, amputating his fingertip.",0
"An employee was removing a drill collar when his glove became caught on it. His left hand was then crushed between the drill collar and drill stump, injuring his ring finger and requiring hospitalization.",1
"A temporary employee was dismantling a scaffold when debris and dust fell into his face, causing him to step into a ladder/stairway opening on the scaffolding. He was trapped in the opening and twisted and fractured his arm. He was hospitalized and had surgery.",1
An employee's left arm was caught in a lint machine while trying to apply spray primer to the feed rollers on the condenser. The employee suffered a de-gloving of the left arm from the armpit to just below the elbow.,1
"On December 13, 2017, an employee propped up a metal hopper with a wrench. The employee was looking for an O-ring that came out of the hopper when the wrench slipped. The hopper then fell and amputated the employee's left index fingertip.",0
"A forklift operator was traveling down a ramp with a stack of pallets, while another employee was walking up the ramp. The employees collided and the injured employee was struck by the pallets, requiring hospitalization for a skull fracture.",1
An employee was cutting meat using a band saw when the blade cut the bottom of his right index fingertip below the nail. His fingertip had to be surgically amputated.,0
"A forklift operator was transporting product when the forklift hit an overhead door and ejected him. He dislocated his ankle and fractured his fibula, requiring hospitalization.",1
"An employee was on a high reach when two pallet stacks started to shift. He dismounted the high reach to stop the boxes from falling, but the boxes fell on him, breaking his ankle. He was hospitalized and had surgery.",1
"On December 13, 2017, at approximately 7:30 a.m., an employee was descending stairs at a high school stadium when he missed the last step and fell, fracturing his hip.",1
"An employee was placing parts into a die using a press brake when his left hand entered the machine, amputating his index finger.",0
"An employee was using an air hose to blow air through a waterline to a well when the hose came loose from the strap that secured it to the water pump. The end of the hose struck the employee's left shoulder area, fracturing his collarbone.",1
"An employee was instructing a trainee on how to set up a single-cycle stroke on a press machine. His left hand was adjusting a miss-feed of the lamination when the trainee initiated the cycle. The top section of the die then cycled down, crushing the first three digits (middle fingers) of his left hand.",1
An employee was using a cart to move a bundle of steel when the steel rolled off the cart and fractured the employee's right ankle.,1
"An employee was going up on a lift. His hand was outside the lift railing, and his right index finger was caught between the railing and a steel erection. His fingertip was amputated.",0
"At approximately 9:30 AM, on December 13, 2017, an employee was buffing a 1-and-1/4-inch piece of steel using a lathe machine and a 3-foot piece of emery cloth when his left hand and arm became entangled around the lathe's rotating shaft. His left middle finger had to be surgically amputated and he required surgery to his left ulna and radius.",0
"An employee was looking for utility marks while surveying for a new fence when a car hit the employee. The employee suffered a broken pelvis, broken collarbone, removed spleen, lacerated liver, and punctured lungs.",1
"On 12/13/2017, an employee was attempting to pull jammed paper out of a shredder when the employee's left index finger contacted the shredder and was amputated before the first knuckle.",1
An employee was attempting to repair a rock crusher. The employee's hand was on the crusher's belt when the machine energized. The belt then crushed and amputated the employee's right index fingertip. The machine was not locked/tagged out at the time.,0
An employee's right middle finger was pinched between two filter element retaining plates while installing the plates as part of a filter replacement task.,1
"On 12/13/2017, an employee was using a table saw to cut hardwood for a coffee table when his left index and middle fingers made contact with the blade, lacerating them and requiring hospitalization.",1
"While climbing a chain link fence to reach equipment, an employee lost balance and fell backwards onto a residential plant stand, suffering back lacerations.",1
"An employee was reversing a forklift when her right hand was caught between the sidebar of the forklift cage and a pallet stored on a rack. Her pinky finger suffered a compound fracture, and her fingertip had to be surgically amputated.",1
"An employee was taping drywall on a baker's scaffold when the employee fell from the scaffold, breaking a hand and ribs.",1
"An employee was boiling pasta. When he reached to remove the basket of pasta, the steam kettle tipped and hot water burned his feet and ankles.",1
"An employee was using a handheld electric grinder when the grinding disc broke off and hit his left arm, deeply lacerating it. He was hospitalized and had surgery.",1
"An employee had just finished installing gutters and was transitioning to a ladder when the employee slipped on the ladder rung and fell approximately 14 to 16 feet, suffering a fractured sacrum. The employee was hospitalized.",1
"An employee was loading empty 1-gallon buckets onto a chute of a labeling machine when the employee's right hand was caught in the machine, resulting in a fingertip amputation.",1
"While walking up a ramp to deliver a package, an employee slipped and fell, dislocating a kneecap and tearing ligaments and tendons.",1
"An employee was running cable through a wall and attaching it to a wall plate. He needed another screw to attach the plate to the wall. When he drilled the screw, it drilled through his left hand.",1
"An employee fell from a ladder to the ground, injuring his foot and requiring hospitalization.",1
An employee fell from a drop ceiling and suffered an injury.,1
"An employee was working near an encapsulation machine when he lost his footing, slipped, and fell to the floor, breaking his hip.",1
"On December 14, 2017, an employee was operating a CNC router machine when the employee noticed a tool was loose on the machine. The employee was then struck by the router, suffering a right femur fracture and right thigh laceration.",1
"On 12/14/2017, an employee was using a water jet ""gun"" with hot water coming out at 3,000 psi to spray columns in a sand pit. The high-pressure water then cut his leg, causing an abrasion and requiring hospitalization.",1
"An employee was finishing a curing cycle and removing a steam line from a pot heater. The line was still under pressure at the time and the steam released, contacting the employee and causing second degree burns to the thigh and crotch area.",1
"On 12/14/2017, an employee was disassembling a bakers scaffold. As he was descending the scaffold, his right foot was caught between the step rail and siderail. He then fell no more than 3 feet to the concrete floor, fracturing his skull and requiring hospitalization.",1
"An employee was pinned by a piece of heavy equipment, injuring his hip and requiring hospitalization.",1
"An employee tripped over her belongings and fell on a carpeted floor, fracturing her femur.",1
An employee was driving a wooden stake into the ground using a sledgehammer when the sledgehammer missed the stake and hit his right index finger. His index fingertip was amputated.,0
"An employee was descending a ladder from a roof when it began to slide sideways. He dismounted the ladder at a height of about 10 to 12 feet and landed with his right foot on the concrete pad below, suffering a compression fracture to the right leg above the knee and below the hip. He was hospitalized.",1
"An employee was operating a forklift with the mast in the air. The mast contacted an overhead cable (16 feet high), causing the front tires of the forklift to raise off of the pavement. The forklift came to rest unevenly and the employee's foot was crushed. The employee also suffered a hip abrasion.",1
"An employee was returning to his vehicle after delivering a package when he slipped and fell on a patch of ice, fracturing his right fibula and tibia.",1
"An employee was installing a new punch press when a piece of the machinery tipped backward and crushed the employee's middle fingers, requiring hospitalization.",1
"On December 14, 2017, at approximately 5:00 a.m., a temporary employee was standing next to a door that was slightly ajar. Her index finger was in the door jam when another door was opened, which created a vacuum in the room. The first door then slammed shut on her finger. Approximately 1 inch of her right index finger was amputated.",0
"On December 14, 2017, an employee was moving crates in and out of the building. As he was returning to the building, he slipped and fell onto the concrete floor, dislocating his left ankle. He was hospitalized.",1
"A temporary employee was setting up a corner board of a manual/hydraulic lift for the next job when his left thumb was pinched between the lift and the base of the lift, amputating his thumb around the knuckle.",1
"An employee slipped on a wet area of the floor, suffering compression fractures to her L1 and L2 vertebrae and a twisting/torsion injury.",1
"An employee slipped and fell on an icy sidewalk near the parking lot, fracturing her ankle and requiring hospitalization.",1
"An employee was un-chocking an incline cleaner with other employees. They finished working on the machine and started to climb down a ladder to the ground level. While passing another incline machine, the employee reached for a handrail. His hand then contacted the machine's running belt and his hand was dragged into the pulley. His left pinky finger's top joint was amputated just above the fingernail and his left ring finger between the fingertip and first joint was crushed.",0
"An employee was installing a rolled insulation system on a building rooftop. The injured employee stepped from the controlled decking zone onto a galvanized purlin at the joint between the insulation and a ceiling liner panel. The purlin was slippery from weather exposure and the employee fell approximately 22 feet to the lower level (concrete), fracturing the upper left leg.",1
Two employees were performing roofing work and changing anchor points when they fell 20 feet. One employee broke his wrist.,1
"An employee was troubleshooting why the latch to the door of a mini-excavator would not open. He had climbed up onto the mini-excavator to get a better vantage point when he lost his footing and fell backward onto a skid-steer bucket that was parked next to the mini-excavator, breaking multiple ribs. He was hospitalized.",1
"An employee fell off a 4-foot step ladder to the concrete floor while filing, suffering back pain.",1
"While walking, an employee tripped and fell over a pile of pallets, fracturing the left wrist and requiring hospitalization.",1
An employee had inspected a vehicle and was exiting the parking lot when she slipped on black ice and fell to the black top walking surface. She broke her left leg.,1
An employee was driving in a fence post using a fence post driver when the employee's fingertip was caught and amputated between the fence post and the driver.,0
"An employee was working on a 5-foot step ladder while using a saw to demolish a wall when he slipped and fell to a concrete slab, injuring his lower back.",1
An employee was descending a 3-step step ladder when she fell to the floor and fractured her leg.,1
"The injured employee was holding the tagline rope assisting a dump truck driver dump a load. When the dump bed was raised, the load shifted causing tension on the tagline rope and fracturing the injured employee's right pinky finger.",1
"On December 14, 2017, at about 10:35 p.m., an employee was rotating a manhole cover on a vertical turret lathe when his gloved right ring finger was caught between the part and the machine head. His right ring finger distal phalanx was surgically amputated.",0
An employee was clearing meat from a grinder machine when it amputated two of the employee's right-hand fingers. The machine was guarded at the time.,0
"An employee was feeding wood into a saw conveyor when a piece of scrap kicked out of the saw and struck the employee's chest. The employee was standing 10 to 12 feet away from the saw at the time. The piece of scrap became embedded in the employee's chest, requiring hospitalization.",1
"While hanging Christmas lights on a pine tree, an employee lost balance and fell approximately 8 feet off a ladder to the ground, suffering fractured ribs and a partially deflated lung.",1
"An employee cut an 8"" crown molding using a sliding compound miter saw. When he attempted to pick up the cut piece, his right hand contacted the blade, amputating his thumb's top knuckle and requiring surgery.",1
"An employee was operating a chop saw to cut wood when the saw cut the employee's arm, requiring hospitalization.",1
"An employee fell 6 feet from a cherry picker while picking orders, suffering broken ribs.",1
"While walking from the dining room to the kitchen, an employee slipped (possibly on a piece of ice) and fell to the floor, fracturing the left wrist and left ankle.",1
"An employee was descending from a scaffold when the employee fell approximately 15 to 20 feet to the ground, suffering a fractured ankle and vertebra.",1
"An employee was setting up and testing dado blades on a table saw when the blades cut two of the employee's fingertips. The blades were unguarded at the time.

Amputation injury?",0
"An employee was performing roadway excavation work when he lost control of a widening machine while going downhill. To avoid the pending impact, he tried to jump clear of the machine and sustained multiple fractures to his right leg.",1
An employee suffered a leg amputation while driving a trash collection truck and picking up trash. The employee was hospitalized.,1
"An employee was mixing dressing in a 500-pound mixer when his right hand entered the machine, amputating his second, third, and fourth fingers from the distal phalanges to the second knuckle. The mixer was guarded at the time.",0
"The employee was part of a scaffold construction crew.  During the course of the work day, the employee had been passing materials to higher scaffold levels from the ground level through the use of ropes and pulleys. Immediately prior to the incident, the employee had been conversing with another crew member while in the process of looking for an electrical cord. The employee became very pale and sweaty and suffered an apparent heart attack.",1
"An employee was operating a powered industrial truck (PIT) to erect a sign when the PIT turned over. He attempted to jump out of the way of the PIT, which then fell on and fractured his leg/foot.",1
"An employee had just delivered a package at a residence and was returning to her truck when she slipped on the icy driveway and fell, breaking her right radius and ulna. She was hospitalized and had surgery.",1
"The employee was helping truss chickens and had placed her hand on the conveyor belt that was stopped due to a product back up. When the conveyor started, the employee's finger was caught in a metal part. The employee pulled her hand out of the part resulting in amputation of the left middle finger between the end of the nail and the knuckle.",0
"An employee was lifting wooden tables when he strained/pulled his right quadriceps, requiring hospitalization.",1
"An employee was setting up a projector from a 10-foot A-frame ladder when the employee fell to the floor, fracturing the pelvis and lower vertebrae. The employee was hospitalized.",1
"Employees were installing trusses in a commercial construction setting. An employee was using standard pine studs as a catwalk to gain access between the newly installed trusses. One of the studs had a large defect (knot). When the employee placed his weight on the defective board, it broke. He fell approximately 22"" to the concrete surface below, suffering blunt force trauma, head trauma, and severe bodily injuries. He was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee slipped on ice and fell to the ground in the parking lot, fracturing his hip and requiring hospitalization.",1
"An air compressor fell on an employee's hand and arm, breaking bones in the hand and wrist.",1
An employee was removing luggage at an airport ramp when she hit her head and suffered a concussion.,1
"While picking orders, an employee fell off an electric power jack. The jack then rolled over the employee's foot, fracturing it and the toes.",1
"On December 15, 2017, an employee was checking the components in the hood of a school bus when her cold-weather gloves were caught by the fan belt, which then forced her hand to strike against the pulley. Her right index fingertip was amputated. The engine was running at the time of the incident.",0
"An employee was cleaning grease from a stationary roller conveyor when the employee's right hand was caught in an adjacent belt conveyor, requiring surgery. The conveyor was not locked/tagged out at the time.",1
"An employee was climbing a 6-foot A-frame ladder when it gave way, became unbalanced, and fell over. He then fell and hit his head on the concrete below, suffering a head injury.",1
An employee slipped and fell approximately 7 feet off a fixed ladder to the concrete below.,1
"An employee was driving a golf cart. His left leg was outside the cart when it struck a metal rack, breaking his left femur.",1
"An employee was lowering a shell plate into position when the plate became wedged. The employee was attempting to pry the plate free when it swung into the employee, who sustained a fractured femur. The employee was hospitalized.",1
An employee was putting boxes on a shelving unit when she stepped down from a ladder or step stool and fell to the floor. She fractured her fibula and required surgery.,1
An employee was cleaning dirt under a conveyor when his right arm was caught between the conveyor belt and the tail pulley of the conveyor. His right arm was torn off just below the shoulder.,1
"An employee was stocking meat items when the employee dropped a package of meat. The employee reached to pick it up while resting one hand on a shopping cart. The shopping cart rolled and the employee fell to the floor, fracturing the upper right femur and requiring hospitalization.",1
An employee was attempting to clean a butter production machine when the machine rollers amputated the employee's fingertip.,0
"An employee slipped and fell on ice in the employee parking and was hospitalized with a broken ankle, requiring surgery.",1
An employee was operating an order picker when he jumped off the picker and contacted a second parked order picker lacerating his lower leg.,1
"An employee was lowering an object from an overhead crane when the chain slipped, allowing the object to fall on the employee's lower left leg. The employee suffered a calf laceration and broken ankle.",1
An employee was walking to his car in the company's parking lot when he slipped and fell on ice. He was hospitalized with brain bleeding.,1
"An employee was climbing an extension ladder when it slipped. The employee fell approximately 10 to 12 feet onto the ladder, suffering a broken right ankle, lacerations, and contusions.",1
"While walking through a retail stock area to lock a receiving door, an employee tripped and fell, suffering a broken hip.",1
An employee was using a wire wheel on an electric hand grinder to remove dried concrete slurry from a vertical steel column while on a 12-foot step ladder. The employee was reaching around the column and fell to the floor resulting in a right femur fracture.,1
"While working on a line and packing boxes, an employee came in contact with an electrical box and received an electrical shock, suffering possible first/second degree burns and other minor injuries.",1
"An employee was stocking merchandise under racking when he stood up and hit the back of his head on a pallet rack, suffering concussion-like symptoms.",1
"An employee was delivering mail at a group mailbox next to his vehicle when a package fell and he bent over to retrieve it. The vehicle then began rolling, and his head was caught between the door to the mailbox and the vehicle, resulting in a head laceration and skull fracture. He was hospitalized.",1
"An employee was rolling out liner to build a containment for a frac tank to sit in. Employees were pushing liner and using a skid steer when the employee slipped and the skid steer came up and caught the employee's ankle, fracturing it.",1
"An employee fell 3 feet from a trailer while delivering product, suffering trauma.",1
"An employee was cleaning a steam table when the front leg came off the table. The table fell over and spilled boiling water on the employee, who sustained second degree burns to the right hand, right elbow, right arm, and knees.",1
"An employee was delivering mail at a residence when she slipped and hit her head on the storm door. She stumbled back and fell onto the lawn, fracturing the top vertebrae in her neck.",1
"On December 16, 2017, at about 6:25 a.m., an employee was stocking shelves with merchandise when the employee's foot became stuck in a pallet. The employee then fell to the ground, suffering a broken hip and potentially broken femur.",1
An employee was struck by an excavator bucket and was severely injured.,1
"An employee was loosening a cargo strap in a truck trailer when the cargo toppled over and struck him, fracturing his left shoulder blade and collarbone.",1
"An employee was walking towards the sign to change the gas price information, slipped on some acorns covering the unpaved area, and fell resulting in a right leg fracture.",1
An employee was making adjustments on a saw gummer when it caught his jacket and pulled his left hand into the machine. He suffered a traumatic left hand injury.,1
"An employee was descending a ladder when her knee gave out and she fell to the floor, fracturing her lower vertebrae.",1
"An employee was blowing snow off a platform when the platform moved. The employee then fell approximately 10 feet into a grave, fracturing the left ankle.",1
"An employee was performing preventative maintenance on a conveyor when the employee's glove became caught on a roller. The employee's right thumb was pulled into the machine, amputating the tip.",1
"An employee was cutting a piece of plastic with a hand saw. He was standing on the piece of plastic when it fell. He also fell, and the saw contacted and lacerated his right forearm, requiring hospitalization.",1
"An employee was mixing chemicals such as alcohol, vitamin E, and aloe in a 500-gallon steel tank to make suntan lotion. As he was adding the aloe, the ingredients briefly flash fired. The employee was wearing a polypropylene suit with latex gloves at the time. The sleeves of the suit melted to his skin, causing second degree burns to his right forearm and wrist and minor burns to his left fingertips. He was hospitalized.",1
"An employee slipped and fell on ice while performing a trailer dock inspection, breaking his fibula.",1
"An employee was on the side of the road hooking up a car to a tow truck when the vehicle shifted, pinning and crushing his right hand between the car and the tow truck.",1
"An employee was operating a band saw to cut meat when the employee's left hand contacted the saw, amputating two fingers.",1
"An employee was testing breakers on an electrical panel when an arc flash occurred. He sustained burns to his arms, hands, and neck.",1
An employee was replacing a seal on a pipe containing caustic chemicals when excess chemicals squirted the employee's face and caused chemical burns.,1
An employee was operating a brake press when the employee's left middle finger was amputated.,1
"An employee was walking to the rig shop from the company vehicle, slipped on ice and fell breaking a hip.",1
An employee was removing a torsion bar and placing it on a pallet when his right index finger was caught between the torsion bar and pallet. His finger was amputated.,0
"An employee was unloading items from a storage trailer using a pallet jack when some MDF that was on a skid slid onto the employee, breaking his right ankle and requiring surgery.",1
"An employee was standing between an excavator and a cutting box when he was struck by the excavator arm, fracturing his left arm and ribs.",1
"An employee slipped and fell to the floor while moving a pallet of ice, fracturing her tailbone.",1
"After tying down pallets on a flatbed trailer, an employee was about to step down onto the bumper to get off the trailer when he missed the bumper and fell to the ground. He fractured his left hip.",1
"An employee was servicing a rodent bait station. A palm (foliage) was blocking his access to the bait station, so he used a multi-tool to cut it. The tool cut his hand, severing his tendon and requiring surgery.",1
"An employee was in the kitchen area when a coworker bumped into her. She fell to the floor and injured her head, requiring hospitalization.",1
An employee was tossing abandoned furniture into a dumpster when he experienced chest and back pain due to an aortic dissection. He was hospitalized.,1
"An employee was cleaning around the base of ""puck"" machinery. He was standing on the railing of the equipment when he lost his balance and started to fall. As he attempted to brace himself for the fall, his right hand inadvertently went into the machine opening that ejects parts, resulting in an amputation of the middle and ring fingers.",0
"On December 18, 2017, at approximately 2:00 p.m., an employee complained of indigestion type symptoms as he conducted a five minute walk through rough terrain while carrying survey gear weighing 20-30 lbs. The employee was hospitalized for cardiac issues.",1
An employee was adjusting a conveyor belt and got a finger caught in a pinch point resulting in a fingertip amputation.,1
"An employee was servicing a ball return/lift when the employee's right hand was caught in a moving chain and sprocket, amputating the index/middle fingertips.",0
"An employee was holding a press plate down when her left index finger was caught between the plate and a clamp, amputating her fingertip.",0
An employee was moving a casting from a liner conveyor when his right ring finger was pinched between the casting he was moving and a stationary casting. His fingertip was surgically amputated.,1
"An employee was feeding cardboard sheets into a machine when a jam occurred. He was attempting to unjam the machine when he tripped and used his right hand to catch himself. His right arm/elbow area was then caught between the machine's anvil roller and stop shaft before the machine fully stopped. He suffered a skin detachment injury to his right arm's elbow/bicep area, requiring hospitalization and surgery. The machine was not locked/tagged out at the time of the incident.",1
"An employee poured stripper on the floor to strip the wax from it. He then slipped and fell onto the floor stripper, suffering chemical burns and requiring hospitalization.",1
An employee was using a pry bar to loosen a stuffing box when the tip of the bar slipped and amputated the employee's fingertip.,0
An employee was riding in a golf cart when he fell out and fractured his ankle.,1
"A crew was setting an air release vault lid onto an air release vault when the load shifted. The employee's right-hand fingers were then pinched between the lid and the vault, breaking the ring finger and causing minor lacerations to the middle and index fingers. His pinky digit was later amputated.",0
Employees had finished clearing trees for a pipeline and were walking back to the trucks. The injured employee slipped and fell to the ground after stepping on a rock covered with leaves. The employee suffered a broken leg and was hospitalized.,1
An employee stepped into an area where hot condensate was present and sustained a condensate burn to the lower right leg.,1
"An employee was opening an overhead door to a personal storage unit when the employee slipped on the rainy surface, suffering right ankle, knee, and shoulder sprains. The employee was hospitalized.",1
"An employee was cleaning a printing press roller because of a blemish on the print output. The employee's left hand entered the press and was pulled into the machine, amputating the middle and ring fingertips.",1
"An employee backed a tractor and trailer up to a loading dock to make a delivery. He was pulling the lift gate away from the rear of the trailer using the attached strap when the strap broke, causing the employee to fall back and hit a wall before falling to the ground. He fractured his femur and dislocated his hip, requiring hospitalization.",1
"An employee was getting down from the back of a trailer and pulled the door down. His hand was in the threshold and the door clipped his left ring finger, partially amputating it.",1
"An employee was mounting a snowmobile to conduct a status check on equipment in the field when he inadvertently activated the throttle, causing the snowmobile to surge forward. The sudden momentum of the forward movement pulled him backwards, causing the throttle to remain engaged. He was then thrown off of the snowmobile and landed onto some parked snow guns, suffering rib fractures, vertebrae fractures, a lung contusion, and a kidney contusion.",1
"While walking into work, an employee stepped off a curb and into a puddle of oil. The employee then slipped and fell, fracturing the right femur.",1
"After making a delivery, an employee was returning to his vehicle when assailants approached him from behind, robbed him, and shot him in the jaw, shattering it.",1
"An employee was in a bucket lift raised to the level of a transformer on a utility pole. The employee had turned off the breaker and cut the power when hot oil sprayed or leaked from the transformer, contacting and burning the employee's face, neck, and back.",1
"An employee was driving an electric scooter down a hallway when she came around a corner and impacted an environmental cart, which caused her to fall off of her scooter. She broke her clavicle and patella, requiring hospitalization.",1
"On December 18, 2017, an employee tripped/slipped while stepping out of a truck and fell backwards onto concrete. He suffered head and neck injuries, requiring hospitalization.",1
"An employee was walking with a staple gun when he tripped and caught the gun's air hose. The gun then fired a staple into his right knee, requiring hospitalization.",1
"On December 18, 2017, an employee was polishing a part when the employee's right index finger was caught in the polisher machine, amputating it to the second knuckle.",0
An employee was cleaning copper pipe staining from masonry surfaces with a chemical cleaning product when he became ill and started shaking. He was hospitalized with an inhalation upper respiratory illness.,1
An employee suffered a dislocated hip while performing act maneuvers in the dolphin stadium. The employee was hospitalized.,1
An employee was attempting to remove plastic buildup from a machine when the machine lacerated the employee's right middle fingertip.,1
"An employee was cutting plywood panels with a saw when he went to stack the finished panel. While he was stacking/leaning the upright panel against other panels, the stack of panels began to slide and knocked his legs out from under him. He landed on his left side and broke his hip, requiring hospitalization and surgery.",1
"While walking down the stairs of an aircraft stand, an employee slipped around the mid-level step, fell onto his tailbone, and slid to the bottom step. He was hospitalized with a back fracture and possible herniated disc.",1
"An employee was attempting to grab a box top that was across a conveyor when the employee's right hand contacted the conveyor frame. The employee's right middle fingertip was then caught and fractured between the conveyor guide and the belt, requiring overnight hospitalization.",1
"An employee was using a ring machine to bend rebar when the machine pinched the employee's left index, middle, and ring fingers, later requiring amputations.",0
"An employee became ill after cleaning a patient's room, suffering vomiting, diarrhea, and nausea. The employee was hospitalized.",1
"An employee was on a deck that was approximately 10 feet high, supporting an insulation board that was being hoisted by a crane, when he stepped backward and fell off the deck to the ground. He injured his back and neck, requiring hospitalization.",1
"A temporary employee was cleaning a converting machine when he attempted to remove a piece of material from the pulley and belts. His right little finger then became caught between a belt and pulley, resulting in an amputation.",1
An employee was on top of a bridge when it collapsed. He was hospitalized with a back injury.,1
"On December 19, 2017, an employee was walking when a forklift backed over his foot, breaking it.",1
An employee was unloading a delivery from the back of a delivery truck when he fell off the truck's elevated ramp and injured his head.,1
An employee's left pinky fingertip was amputated.,1
An employee was removing scrap from a table saw when his right ring finger contacted the blade and was amputated. The saw was guarded at the time.,0
An employee was cutting foam with a toothed saw blade when it cut his left palm.,1
"An employee was machining parts on a press brake when the employee's right index finger was caught and crushed under the brake, resulting in an amputation.",0
An employee was showing a knife when it cut two of the employee's finger tendons.,1
"After a crane lift, an employee removed the hooks from a casting and was retracting the crane when one of the hooks caught on the edge of a platform. As he attempted to free the hook, the tension on the crane sprung and the hook struck him in the face, breaking his facial bones.",1
"An employee was struck by a forklift while cleaning a work area, suffering a broken arm.",1
"An employee was working in the breezeway of a new construction townhome and  reached over a guardrail to hand a ladder down to another employee. When he put pressure on the guardrail it gave way and he fell through the upper and mid-rail to the ground, landing on the other employee. He broke his hip and lacerated his head, requiring hospitalization.",1
An employee was cutting wood shims with a circular saw when the saw lacerated his left middle finger. He was hospitalized.,1
"An employee was MIG welding a pintle plate onto the under chasse of a dump truck when welding sparks and slag ignited the back of his shirt, causing third, second, and first degree burns to his back.",1
"Employee 1 was making calls at her desk. In an adjacent space, employee 2 began using an unknown chemical to clean a whiteboard. After an inhalation exposure to the chemical, employee 1 experienced difficulty breathing and suffered an asthma attack, requiring hospitalization.",1
"An employee was throwing an old street light into a dumpster when the glass lens broke and lacerated his arm, requiring surgery and hospitalization.",1
An employee was pulling a trailer onto the road when the pulling unit slipped off its timbers and crushed all five toes on the employee's left foot.,1
"While pulling a hose across the ground, an employee stepped forward and fell into a 3-foot hole for a foundation, fracturing the right side of the face and bruising the upper right thigh. The employee was hospitalized.",1
"An employee climbed on the back of a farm tractor and slipped off the fuel tank. He fell to the ground and suffered a cracked pelvis, requiring surgery.",1
"An employee was walking across the work floor when he slipped on a knee mat and fell. His head hit the concrete floor, causing bleeding inside his head.",1
"An employee was cleaning a pizza roller machine when his right hand was pulled into the dough roller, causing a hairline fracture to his middle finger and contusions to the other fingers. He was hospitalized.",1
An employee was delivering mail on his route and reported chest pains and breathing difficulty. He was hospitalized for a heart attack.,1
"An employee was exiting his vehicle in the parking lot when he slipped on a patch of ice. When his left foot hit dry payment, the momentum of his body torqued his foot, causing his left ankle to fracture.",1
An employee mounted a haul chain to move a piece of wood when his right leg became caught in the outfeed chain and sprocket. He was hospitalized for surgery.,1
An employee was running wires on a 10-foot A-frame ladder when he fell from the third rung and broke his toes.,1
"On December 19, 2017, an employee was performing maintenance on a casting machine when the employee fell 8 feet to the cement floor. The employee suffered a fractured sternum and two cracked vertebrae. The pin for the guardrail gate was not locked at the time of the incident.",1
An employee was riding a crew bus to a job site when the bus stopped. The crew exited the bus and was standing on the side of the road when a private vehicle struck employee. He suffered multiple blunt force trauma.,1
An employee slipped on ice in the parking lot and suffered a knee injury.,1
"The employee was de-burring a stainless steel plate with a belt sander, lost control of the plate and contacted the belt sander resulting in a thumb tip avulsion that was subsequently surgically removed.  There was no bone loss.",0
"While stepping off a trailer deck, an employee slipped and fell, injuring the left leg.",1
"An employee fell down stairs and broke her shoulder, requiring surgery and hospitalization.",1
"While cutting lumber with a chop saw, an employee noticed a small block of wood was stuck near the point of operation. The employee released the button used to actuate the saw blade and attempted to remove the small block of wood. The blade had not stopped and caught the employee's gloved hand, amputating the left pinky finger.",0
"An employee's hand entered a dust collector tube and was struck by the spinning blades, lacerating his thumb and forefingers.",1
"An employee was pushing a cart with housekeeping tools and products down a hospital hallway. She was passing by the access to a construction area when a construction worker exited it through a zippered plastic barrier. The employee was then exposed to dust that escaped through the barrier,  which caused her to have an asthma attack.",1
"An employee was removing the gate on a collapsible hopper when a 180-pound metal panel struck the employee, causing a dorsal radius fracture that required hospitalization.",1
"An employee was helping a coworker wheelchair in a non-responsive patient from the emergency room parking lot when he tripped over a carpeted runner and fell on his right side, fracturing his arm. He was hospitalized.",1
An employee was introducing limestone into the manufacturing process on a conveyor when the employee's right arm was caught and fractured in a pinch point between the conveyor's flighting and discharge spout.,1
An employee's ankle became caught in a wall depression while he was repelling down the wall. He was unable to rotate his body and broke his ankle.,1
"An employee was riding on a trash truck when another vehicle failed to stop and crashed into the back of the trash truck. The employee's leg was pinned between the two vehicles, and she suffered a compound fracture that required hospitalization.",1
An employee was hospitalized after being physically assaulted by another employee.,1
"On 12/19/2017, an employee was standing in the parking lot talking to the plant manager of a customer. The area was marked adequately with cones and tape. As the discussion was taking place, a security guard for the customer drove his vehicle through the cones and struck the employee, throwing him onto the hood of the vehicle. He suffered a concussion and four broken ribs.",1
"An employee was washing dishes when a pot became stuck in the dishwasher. As she stepped to get the pot out, she slipped and fell on the wet floor, injuring her lower back.",1
"An employee was holding plywood stencils up as another employee was pulling out needed stencils. The employee lost their footing and slipped. The stencils then fell on the employee, who suffered ruptured vertebrae.",1
"An employee was using a pedestal grinder to grind the tip of a screwdriver when the tool was pulled between the grinding wheel and tool rest. His fingers were pulled in with the screwdriver, partially amputating his left pinky finger to the first knuckle.",0
"An employee was riding a mobile pallet jack when it slipped on the floor. The employee then dismounted the moving pallet jack, and his right leg was caught between it and a rack, suffering a compound fracture.",1
A security guard was making rounds when an individual entered the unit with two pistols and began firing. The security guard confronted the individual and was shot twice.,1
"After a verbal altercation with a co-worker, an employee started to experience chest pains and tingling into the left shoulder. The employee was hospitalized.",1
"An employee was operating a food processor when the blades jammed. As he cleared the jam, the food processor restarted and the blades caught his right middle finger, fracturing it and causing an amputation injury.",0
"An employee was removing cast stone panels from an existing structure and placing them on a piece of 2x4 lumber when the employee's right little finger was pinched between the 2x4 and cast stone, amputating the fingertip.",0
"On 12/20/2017, at 2:45 a.m., an employee was providing security while attending to a patient when the patient pushed him to the floor. He sustained a head laceration and was hospitalized.",1
"An employee was cleaning a conveyor belt roller when her left hand/arm became caught in the moving roller. She fractured her left arm and wrist, requiring hospitalization.",1
"While loading food service equipment into a truck cab, an employee slipped and fell on an icy dock area, injuring both knees and rupturing the right and left quadriceps tendons.",1
"On 12/20/2017, at approximately 4:00 a.m., a maintenance employee was working with another employee to troubleshoot a dust collector. The second employee cycled the dust collector to spin the belt and then immediately turned it off. The first employee was attempting to slow down the belt drive when the employee's right hand was caught in the belt, amputating the ring finger at the first knuckle.",0
"An employee's left hand was caught between some equipment, amputating his middle finger.",1
An employee was moving a roll of plastic using a pallet jack when the roll fell on and broke the employee's leg.,1
An employee was cleaning out a chemical container tank when the tank's water/caustic mix sprayed and burned his back.,1
"On December 20, 2017, an employee was attempting to clear a jam in a slitter machine when the slitter knives lacerated the palm of his hand to his wrist.",1
"Two employees were removing a battery from a vehicle when the battery fell from the vehicle, striking both employees. One employee was hospitalized.",1
An employee was hospitalized for a possible insect bite/sting to the left hand.,1
"An employee was getting fries out of the freezer. As he stepped out of the freezer, he lost his balance and fell on his right ankle, breaking it and requiring surgery.",1
"While working on VAV box control wiring from an 8-foot A-frame ladder, an employee fell to the ground, breaking five ribs and puncturing a lung. The employee was hospitalized.",1
"On December 15, 2017, at 1:55 p.m., an employee struck a pile of drywall while operating a scissor lift. The drywall then fell and struck the employee's right leg, fracturing the tibia and requiring hospitalization.",1
"An employee was attempting to tow a vehicle that had broken down. The vehicle was hooked to the tow truck using a winch. The employee was in the space between his truck and the towed vehicle when the winch controller became jarred and damaged, causing the towed vehicle to lurch forward pinning him between it and the truck and breaking his left femur.",1
"An employee shut down a ripsaw, removed the dust boot, and was reaching under it when the employee's right hand contacted the still moving blade, severely lacerating the thumb and index finger.",1
An employee was installing sheet metal roof curb and caught a finger between the sheet metal divider and a standing seam roof rib resulting in amputation of the distal phalanx.,1
"An employee was cleaning out a ready-mix concrete truck with an air hammer when a portion of dried concrete fell on the employee's left hand, fracturing the middle finger and amputating the index finger.",1
"An employee was lowering a standpipe in an articulating lift when four of the employee's left-hand fingers were crushed between the rail of the lift and the pipe, requiring hospitalization.",1
"On 12/20/2017, at about 10:00 a.m., an employee was operating a masonry mixer when he attempted to scrape the dry mortar off the side. His fingers were caught in the mixer, amputating his index and middle fingertips to the first knuckle and detaching his pinky finger from his right hand.",1
An employee was binding pieces of cardboard together in a baling machine when the baler amputated two of his middle fingertips.,0
"An employee fell backwards while unstrapping shopping carts in a parking lot, suffering a leg hematoma.",1
"An employee was operating an excavator to demolish the fiberglass blade of a large windmill when a piece of the blade broke off and struck the excavator cab, pinching and bruising his leg between the seat and controls.",1
An employee suffered a heart attack while restraining an uncooperative patient.,1
"On 12/20/2017, at 12:00 PM, an employee was attempting to answer her cell phone when she fell off a mobile unit lift area, about 3- to 4-feet, to the asphalt or concrete below. She sustained a lower back compression fracture and right arm fracture, requiring hospitalization.",1
"An employee was operating a gang nail machine to nail two pieces of wood truss together on a metal plate. He attempted to retrieve a document that was on the machine when his right pinky finger became caught in it, amputating the skin on his fingertip.",0
An employee cut a finger on a band saw resulting in a fingertip amputation.,1
"An employee was working near an overhead crane that was supporting a 30-foot, stainless steel pipe that was perched on jack stands. The pipe fell from the jack stands and crane, striking and breaking the employee's pelvis.",1
"An employee exited his vehicle at a substation gate area. The vehicle drifted forward, pinning him between it and the gate. He was hospitalized with cracked ribs and leg lacerations.",1
"An employee filled a ton container with chlorine and attempted to unhook the fill line. The container valve was not shut at the time. He was able to quickly close it and prevent a release, but he breathed in chlorine vapors and suffered lung irritation.",1
An employee was using a rip saw to cut a beef product when the blade partially amputated the outside tissue of his left pinky finger (no tendon or bone damage).,0
"An employee was moving 2-pound bags of product from a conveyor belt to shipping boxes when the employee's left hand became caught in a nip point on the belt, amputating the pinky fingertip.",1
"An employee was using a round blade knife machine to cut fiber when the blade cut his left ring finger, resulting in a fingertip amputation.",0
"An employee was operating an electric pallet jack when he lost control as the unit sped up. He swerved and fell off the jack, hitting the concrete floor. He broke four ribs and bruised a lung.",1
"An employee was feeding tee bar stock into a bar straightener when his hand was caught in the machine, causing a fracture and tendon damage to his right middle finger.",1
"Employees were using an ATV to travel through a tunnel when they collided with another ATV being used by a colleague. One of the employee's suffered a broken leg, requiring hospitalization.",1
An employee was washing down a conveyor belt when his glove was caught by the moving parts and his left hand and wrist were pulled into the conveyor. He suffered a compound fracture to his left wrist.,1
"An employee was helping another employee manually reposition three 5-inch pipes that were placed awkwardly on a rack. The employees straightened the pipes and returned to their work station. A forklift operator then drove over and attempted to manipulate one of the pipes with the forks. The pipe rolled and crushed the employee's right hand, causing a laceration and muscle damage that required hospitalization.",1
"An employee was trying to remove a jammed sack from a dust collector when the employee's left hand was pulled into the machine, partially amputating the index and middle fingers.",0
"An employee was working near an electric box oven when it exploded. The oven door struck the employee, causing head injuries.",1
"An employee slipped and fell while walking outside to her vehicle, hitting her head on the concrete ground and fracturing her skull. She was hospitalized.",1
A workover crew was making up their last joint of tubing when an equipment operator picked up the slips before the injured employee moved the tongs out of the way. The tongs then struck the employee in the head.,1
"An employee was connecting a trailer to a dolly with a chain when his pinky finger was pinched by the chain, resulting in an amputation.",0
An employee fell to concrete while descending a ladder and broke his left elbow.,1
"An employee was stacking pallets when he was struck by a pallet carrier, pinning and fracturing his ankle.",1
"An employee was attempting to adjust a glycol wrap on a pipe when it shifted. High-pressure water then exited the pipe and struck the employee, knocking him to the ground and breaking his ulna.",1
An employee was inside a trailer moving panel windows to prepare for unloading when the stack of windows fell on him fracturing his left tibia. The employee was admitted to the hospital for surgery.,1
"An employee was mixing paint with an electric drill and paddle drill bit when his left middle finger was caught between the drill bit and chuck, amputating his fingertip.",0
"An employee was stripping insulation from an electrical wire to test an electrical circuit when his right index finger contacted a live electrical wire, suffering second and third degree burns.",1
An employee was rotating a non-powered fan when the employee's fingertip was caught and amputated between the fan's belt and pulley.,0
"While installing a soffit on the bottom of a roof, an employee walked backwards off the work platform and fell 15 feet to the ground, suffering a broken wrist and possible rib fractures.",1
"An employee was performing maintenance on a breast skinner with another employee and had opened a magnetic interlock door to halt the machine's operation. The other employee held a wrench close to the interlock and the machine engaged, pulling the maintenance employee's right hand between a sprocket and chain. The employee suffered a pinky finger amputation and partial ring finger amputation. The machine was energized at the time of the incident.",0
"An employee was setting a work piece into a manual lathe using an overhead crane when the employee's finger was pinched between the machine chuck jaws and the work piece, amputating the fingertip.",0
An employee was unloading a pallet from a semi-truck with a forklift. The employee had parked the forklift on the dock and was behind it when the forklift rolled backward and crushed the employee's leg.,1
An employee was working on a slasher when the beam on the slasher moved and lacerated his forearm. The beam was not secured at the time.,1
"An employee was spotting for a forklift driver when a steel beam rolled off a truck and onto his left leg, fracturing his ankle.",1
"An employee used a chop saw to cut an aluminum channel and then turned off the saw. His hand was near the winding down blade when it caught his glove and pulled his hand into the saw, cutting his thumb. He was hospitalized.",1
"While carrying a prefabricated door, an employee tripped and fell to the ground, fracturing the right hip.",1
An employee as cleaning debris from the secondary screw of a blender when it amputated part of his index finger. The machine was running at the time.,0
"Two employees were setting a slab of steel to be welded. One employee used a jack to move the steel to the correct spot. When the jack was released, his left middle finger was pinched between the slab and the stand, partially amputating his fingertip.",0
An employee was backing up a reach truck when his finger was caught and amputated between the reach truck and a pallet rack.,1
An employee fell down steps and fractured a shoulder.,1
An employee was using a hand torch when it burned the employee's chest and stomach.,1
"An employee was grabbing a bookbag out of a skid steer that another employee was operating when the bag strap became caught on the joystick. The skid steer then ran over him, fracturing his right leg, pelvis, ribs, and collarbone.",1
"An employee was holding onto a ladder to check cargo seals on a milk tanker when the employee's foot slipped. The employee then fell approximately 5 feet to the asphalt lower level, suffering a back injury and requiring hospitalization.",1
"An employee tripped over a customer's foot and fell to the floor, suffering a fracture.",1
"On 12/22/2017, at 6:18 PM, an employee was rolling a house wrap on a new residential construction when he fell off the edge of the house and injured his ankle, requiring hospitalization and surgery.",1
An employee was unloading a truck pallet of totes when they fell on top of the employee.,1
An employee suffered a left fingertip amputation while removing plastic from a powered planer.,0
"On December 22, 2017, an employee suffered an electrical shock while performing maintenance on a furnace. The employee then fell approximately 10 feet, suffering a broken back.",1
An employee was in a trench cutting a pipe with a cut-off saw when it kicked back and cut his face.,1
"An employee was drilling a mounting hole into a piece of PVC pipe when the pipe shattered. A shard then struck the employee's eye, resulting in a possible eye loss and requiring hospitalization.",1
"An employee was loading a pig into a pig launcher and closing the end hatch on a vertical pipe. The hinged pig launcher hatch began to fall and the employee attempted to catch it with his right hand, which was crushed between the pipe flange and hatch. He suffered soft tissue damage to his right middle and ring fingers, requiring hospitalization.",1
"Equipment was being used in an excavation to stop off a high-pressure gas main. The equipment failed, causing an uncontrolled release of gas. This high-pressure stream shot dirt, gravel, and debris from the excavation area, which struck an employee and caused a shoulder separation, requiring hospitalization.",1
"On December 22, 2017, an employee was working on a water coil roll when steam came out of the roll and burned the employee's stomach, chest, and arm.",1
"An employee was working in a flow back trailer when a generator stopped working. The employee tried to restart it and a fire started, causing third degree burns to the employee's hands and second degree burns to the face.",1
"An employee fell off the back of a truck trailer to the asphalt driveway below while completing a delivery. The employee suffered neck, back, and right wrist fractures and was hospitalized.",1
An employee slipped in the snowy parking lot while going from work to her personal vehicle. She fell to the ground and broke her leg.,1
An employee suffered a left-hand finger amputation while using a saw to cut meat.,0
"A walkie rider hit the back of an employee's right ankle, severing her Achilles tendon. She was hospitalized and had surgery.",1
"An employee opened an access panel on a pipe rattler unit to adjust the pipe by hand. His right hand made contact with the pipe cleaning brush, which was still energized at the time, rubbing the skin on his hand away to the muscle layer.",1
"While walking behind the plant to inspect a combo vat, an employee stepped into a 2' X 2' concrete drain and broke the left ankle. The grate over the drain had been removed due to heavy rain.",1
"An employee slipped on a wet sidewalk and fell down, suffering a sprained ankle.",1
"An employee was stocking items from a top stock cart. She then turned around and began descending the cart when she slipped and fell, striking her back on the steps of the cart. She suffered broken ribs.",1
"An employee tripped while picking up items on the floor, landing on and fracturing the hip.",1
"An employee slipped and fell on black ice in the parking lot, fracturing his left ankle.",1
"On December 23, 2017, an employee parked between two vehicles and opened her vehicle door. When she put her left foot on the ground, it slid on ice and went under the vehicle parallel to hers. She then fell and fractured her left tibia and left fibula, requiring hospitalization.",1
"On 12/23/2017, at approximately 7:30 AM, an employee was attempting to plug a grill in when he contacted the plug and received an electrical shock.",1
"An employee was in his vehicle going through a green stoplight when traffic came to a complete stop. He was then struck from behind by a van, suffering brain bleeding as well as neck and back injuries. He was hospitalized.",1
"An employee was manually unloading a wooden crate to reload a conveyor belt when the contents in the crate shifted toward the belt. The employee's right ring finger was then pinched between the crate and edge of the conveyor belt, resulting in a medical amputation.",1
"On 12/23/2017, an employee was in front of the store hanging a banner while standing on a 6-foot ladder. He was then descending the ladder when it tipped sideways. He fell onto the sidewalk, fracturing his left tibia, fibula, wrist, and elbow. He was hospitalized.",1
"An employee was on a ladder cutting wrapping from product when the employee fell to the floor, suffering a fracture and requiring hospitalization.",1
"An employee was unstrapping a piece of pipe when it rolled off, fell, and hit his foot, fracturing it and requiring hospitalization.",1
"An employee stepped on ice while exiting his company vehicle. He slipped and fell, hitting his head and suffering a concussion.",1
"An employee was using a sand blaster when sand from the nozzle hit the employee's calf, causing a laceration.",1
"An employee was cutting meat with a band saw when his left hand slipped. The band saw then lacerated his left index and middle fingers, and his middle finger had to be surgically amputated.",1
An employee was laying out food for the holidays in the manager's office when a former employee entered the store and stabbed the employee 18 times with a knife.,1
"An employee was removing donuts from a display case. As he turned around, he tripped on a power cord that was on the floor and fell to the ground, fracturing his right hip.",1
"An employee was moving a powered pallet jack out of the way of another employee when he lost control of the pallet jack and his leg was pinned between it and a rack, breaking his femur.",1
An employee was attaching two ropes when the sheer force of the yanking of the two ropes amputated his right hand.,1
"An employee was installing building panels when his fingers were caught between a panel and a wire, amputating his left index and middle fingertips.",0
An employee was standing on stacked milk crates to reach a higher shelf when she lost her balance and fell. Her rib struck the crates and was fractured.,1
An employee fell off a platform while cleaning a confined space.,1
"On 12/25/17, at 1:00 AM, an employee fell off a 4-foot ladder while closing the water panel on an aircraft.  The employee suffered a lower right leg fracture, requiring hospitalization and surgery.",1
"An employee was hosing down an area outside when he stepped back into a propane heater, which ignited his clothing. He received burns to his legs and hand.",1
"An employee was working on a winder. He and his crew were threading up the winder when the head of paper that was being threaded jammed in the winder. As he attempted to remove the jammed paper, his left hand was caught in the paper cutoff vane. He suffered deep lacerations on the lower left arm, wrist, and hand, which resulted in an amputation.

Code: yes, amputation; part unknown",1
"An employee tripped on his foot while going down a flight of stairs and fell three steps to the ground, tearing tendons in both knees.",1
An employee was exiting a patient's room when she tripped over a bedside table and fractured her hip.,1
An employee was packing fork and knife packets and had an allergic reaction and was hospitalized.,1
"An employee was exiting a skid steer after moving materials in it when he lost his footing and fell to the ground, breaking his hip and requiring hospitalization.",1
"An employee was loading a trailer with a dingo digger that had an auger head attachment when the attachment slid out and came down on the employee's hand, amputating his left thumb between the nail and knuckle.",0
"An employee was attempting to remove a jam in a box printing machine when his glove and right hand were caught by the machine rollers, pinching/crushing his middle and index fingers. He was hospitalized for surgery.",1
"On 12/26/2017, at approximately 5:10 PM, an employee attempted to deliver mail to a residence and was returning to his vehicle when a dog exited the residence and attacked him. The dog knocked him to the ground and bit his left cheek.",1
An employee was talking to a forklift operator when the operator lost control of the forklift and struck the employee. The employee suffered foot and pelvic injuries.,1
"An employee tripped over a speed bump in the parking lot and fell to the pavement, suffering nose scrapes as well as forehead and knee injuries.",1
An employee was working in a laboratory adjacent to a boiler room when she was exposed to carbon monoxide emissions from a boiler exhaust leak. She suffered carbon monoxide poisoning and was hospitalized.,1
"An employee was delivering a parcel and descending the steps of a residence when he fell onto the ground. He suffered a fractured skull, three broken ribs, and bleeding on the brain.",1
"An employee was attempting to drive a pallet jack around another pallet jack when her right leg became pinned between the pallet jack and a pallet upright, suffering a laceration and contusions.",1
"An employee was holding the right side of a gate corral open while a garbage truck backed up. The employee then attempted to lift the dumpster lid behind the truck and was struck by the vehicle, suffering a broken leg and hip.",1
"An employee was walking through the parking lot when he slipped and fell on black ice, breaking his ankle.",1
"An employee was riding an elevator up to the 5th floor when the elevator suddenly stopped and jerked, falling about 6 feet and tossing the employee to the floor. He broke his right leg in three places.",1
An employee was testing an electrical circuit (480V) and was hospitalized with arc flash burns.,1
"An employee was knocked over by another employee, fracturing her right femur.",1
"An employee was taking inventory in a warehouse area when a stack of door skin bundles tipped over and pinned the employee. The employee suffered a fractured pelvis, multiple right leg fractures, and broken ribs.",1
"An employee was carrying a chainsaw from his truck to his work location. The gas cap was not properly secured at the time. While he was walking, some of the gas spilled out onto his right pant leg. He set the saw down and was walking back to his truck to get more tools while smoking a cigar. As he was attempting to discard his cigar it struck his outer layer of clothing, igniting the fumes from his fuel-soaked pant leg. He suffered third degree burns to his right forearm, abdomen, and chest area.",1
An employee was performing maintenance on an ice bagging machine when his left middle finger was caught and lacerated by the machine.,1
An employee fell approximately eight feet off a step ladder and was hospitalized with a broken wrist.,1
"Two employees were replacing a 10-inch blow-down pipe that was approximately 20 feet long beneath a conveyor. They attached a rope to the pipe and pulled it along the conveyor using a forklift. 
While they were moving the pipe along the conveyor, it became caught on another piece of pipe. The forklift operator kept adding pressure to the rope. One of the employees went to free the pipe, and it shot forward due to the pressure from the forklift. The pipe struck the employee and pinned his right arm against the conveyor's leg, breaking it.",1
"An employee slipped while climbing into a truck, suffering a foot fracture.",1
"An employee tripped on a hair tie on the sales floor and fell to the ground, fracturing her right knee.",1
"An employee was wrapping a pallet of milk in the dairy cooler, tripped over a pallet jack and fell striking their head on the concrete floor.",1
An employee was walking a dog to a bathing area when the dog bit the employee. The employee suffered puncture wounds to the right forearm and was hospitalized.,1
"After hooking a trailer to a truck, an employee slipped on ice and fell to the ground while doing a walk-around. The employee suffered a broken left wrist.",1
An employee was walking through a metal door when two of his left-hand fingers became jammed and lacerated between the closing metal door and the metal door frame.,1
An employee was using an electric meat saw to cut a ham for a customer when the saw amputated the right ring fingertip.,0
An employee was swinging a basket of castings when the basket came down and amputated the employee's finger.,1
"An employee was burned on the face, chest, and back by steam while opening an autoclave.",1
"An employee was installing circuits in an office attic. During the work, he went up and down a ladder carrying tools and materials. A different employee needed access to the attic, so he folded the bottom of the ladder. The injured employee did not notice the ladder was folded and began to descend it. He then fell to the concrete ground and fractured his hip.",1
An employee was attempting to clear a jam of material from a trim conveyor on the back side of a strip caster when his finger was caught in the chain drive sprocket. His left ring finger was amputated just below the first knuckle. The chain was unguarded and the conveyor was not locked out at the time of the incident.,0
"An employee was working on a three-step ladder resetting vacuum displays when he fell on his back to the floor, striking and injuring his head. He was hospitalized.",1
An employee was cleaning a small piece of equipment using a powered rotary wire brush when a piece of wire went through his glove and became stuck in his left hand. His hand became infected and required hospitalization.,1
"An employee was standing on about the fifth rung of an 8-foot extension ladder while operating a pneumatic paint spray gun to paint the exterior of a residential, single-family home. The ladder shifted as the ladder support (leg) sank into the sandy ground surface, and the employee dismounted from the ladder and landed on the ground, striking his right hip. He suffered a nerve injury and was hospitalized.",1
An employee was placing handgun barrels in slide trays when he tripped while reaching across a work table and felt a pop on his right side. He was hospitalized with a fractured rib.,1
"An employee was starting up a fleet of trucks to warm them up. While walking to a truck, he slipped and fell on a snowy walkway, hitting his head.",1
"Two employees were pulling slate pieces (weighing 150 to 225 pounds) from a shipping crate that was stacked on another crate. The employees removed the side of the crate to remove the slate pieces. As they were removing a piece, it shifted and pinched the injured employee's left middle finger, amputating half an inch of the fingertip.",0
"An employee was walking to a market on a work-related errand when he slipped on ice and fell to the ground, striking his head and shoulder and requiring hospitalization.",1
"An employee was unloading bundles of rebar from a flatbed trailer and rigging them for a crane lift using wire rope slings. He was holding up the rigging until the slings began to tension and was positioned alongside the load. As the crane operator began to tension the load, the boom deflected, resulting in the boom tip sheave traveling laterally and losing alignment with the center point of the load. The resulting angle of the main hoist line caused the load itself to move laterally once it was up off of the trailer. The employee had to secure himself to the load to avoid being knocked from the trailer. The signal person who witnessed the event directed the crane to lower the load. While the load was coming down, the employee attempted to regain footing on the trailer and ended up with his left foot below the load. The load contacted his lower left leg, fracturing his tibia and fibula.",1
"While providing patient care at a home, an employee tripped over a dog and fell. The employee's head struck an end table resulting in a head injury, requiring hospitalization.",1
An employee slipped and fell in the icy parking lot while getting out of a car.,1
An employee slipped on ice while scanning inventory stickers and fell down. The employee sustained a broken femur and was hospitalized.,1
"An employee pulled a 5-pound box from a stack and tripped on shrink wrap, suffering a broken hip.",1
An employee was driving a standup forklift out of a trailer truck when he attempted to raise a dock drawer. His left wrist and part of his left arm were then crushed.,1
"An employee was shutting down a compressor unit using the shut-down button inside an electrical panel. When he pressed the button, the door blew back from pressure and struck him, knocking him off his feet into a trash bin. He then got up to fight a small fire that had developed in the electrical panel. He suffered broken ribs as well as facial and chest contusions.",1
An employee was changing the tooling and setting up a spot welding machine when both of the employee's thumbs were crushed in the machine's point of operation. Both thumb tips were amputated.,0
"An employee was walking between rows of carts while doing inventory when she stumbled on the platform, which is 4 inches above the floor. She fell and broke her left leg above the knee, requiring hospitalization.",1
An employee was walking when an unknown object fell from above and hit his head. He was hospitalized with head and neck pain and swelling.,1
An employee was maneuvering a cart full of linen bags down a ramp when the employee lost control of the cart and was pinned between it and the wall. The employee suffered a dislocated hip and was hospitalized.,1
"On December 27, 2017, an employee was clearing a jam on a granulator machine when the machine's blade came loose and amputated the employee's fingertip. The machine was locked out at the time.",0
"An employee removed a folded piece of veneer from a conveyor belt and then turned around to get ready to straighten the next piece. When he turned, his gloved left hand contacted the belt, which then pulled his index finger into the pinch point between the drive roll and guide plate. When he pulled his hand free, his index fingertip was torn off.",0
"An employee was on the ground and lifting a bundle of shingles when he collapsed in pain from a hernia, requiring hospitalization.",1
"An employee slipped and fell while walking through a car wash tunnel, suffering a head injury.",1
An employee slipped in the mud and fractured an ankle.,1
"On December 27, 2017, an employee was walking out of a room when her foot became tangled in the straps of a bag on the floor, causing her to fall.  She put both hands out in front of her  to try and prevent the fall and suffered bilateral fractures to both elbows.",1
"An employee was on a ladder performing a fire door drop test at a customer's location when the ladder slipped. The employee then fell to the floor, suffering broken ribs, a collapsed lung, and a broken pelvis.",1
Two employees were working on a forklift due to a belt issue. The injured employee was working on the belt when the other employee started the forklift. The belt and pulley in the forklift motor then amputated the injured employee's right index fingertip.,0
An employee was backing a forklift into its space to charge and crushed his left foot between the forklift and the wall resulting in a broken ankle.,1
"On 12/27/2017, an employee was working on a store safe when the safe door slammed shut on her thumb, amputating the tip.",0
"On December 28, 2017, at approximately 1:00 p.m., an employee was standing on the top edge of an open top roll-off that was overfilled with solid waste for the purpose of transferring the excess waste to a second roll-off. The employee then fell approximately 6 feet to the pavement adjacent to the roll-off, sustaining a head injury and requiring hospitalization.",1
"An employee was operating a knuckle boom crane attached to a pump truck. The employee was loading bagged material into the truck's hopper when the hopper door jammed. The employee climbed onto the truck to open the jammed door and then fell to the ground, suffering a musculoskeletal injury in the left knee.",1
"An employee was conducting form work when he fell into an unguarded hole, suffering fractures and a concussion.",1
"An employee was inspecting some plumbing on a roof when he stepped through a stair hole and fell from the fourth level to the third level, breaking vertebrae and ribs.",1
An employee was shot in front of the work building.,1
"An employee was loading spreader bars onto a flat bed truck when the spreader bars shifted and fell onto his left middle finger, crushing it.",1
An employee was cleaning a dough mixer machine when the employee's left hand was caught and fractured between the machine's moving rollers.,1
"An employee was cleaning a gut buggy. The lid was up on the cleaning tray when it dropped and closed on his left index finger, amputating the fingertip.",0
"An employee was walking on a catwalk when her jacket became caught and she lost her balance, falling 4 feet to the ground and breaking her hip.",1
"An employee was cleaning a band saw when his left hand was caught by the blade, lacerating his thumb.",1
"While dropping rounds of meat, an employee was sharpening a knife when a chunk of meat came down from the rail and struck his elbow, forcing the knife into his chest. He suffered a chest laceration.",1
An employee was inside an empty patient's room in a hallway that was being cleaned when she was overwhelmed by the cleaning chemical fumes. She became short of breath and required hospitalization.,1
"The vat tilter was in the raised position while an employee cleaned the floor around it. It unexpectedly lost pressure and struck the employee resulting in fractured vertebrae, nerve damage to the neck and left arm and other fractures. The employee was hospitalized.",1
"The injured employee was using a blower to clean the floor when a 192"" tall block of expandable polystyrene (EPS) foam weighing 200 lbs. turned over and struck the employee as he walked by it. EPS foam blocks are moved from the block mold to the production floor by an operator using a tip method. The injured employee suffered a vertebra fracture.",1
"An employee was unstrapping boxed furniture materials when they collapsed on the employee, causing neck and head injuries that required hospitalization.",1
"An employee was cleaning a fudge depositor machine when his finger entered the auto fill valve while the machine was still energized, resulting in his finger being cut/amputated.",0
"On December 28, 2017, an employee was troubleshooting a pressure washer unit to determine why water was not spraying out of the spray nozzle. Pressurized water and air pressure released when the employee removed the cap/lid to inspect an internal screen. The employee's hand tool and the cap/lid then struck the employee's face, fracturing bones in the nose and forehead and lacerating the right pinky finger.",1
"An employee was working at the dry end of an egg carton production line when she attempted to step away from the line. She descended three steps and missed the last step, losing her footing and fracturing her tibia.",1
"An employee was setting up a roll of paper in the roll stand at the wet end of a corrugator while a clamp truck operator was carrying a paper roll nearby. The truck operator then pinned the injured employee between the roll stand and the paper roll. The employee suffered pelvic fractures, a left ankle dislocation, and ligament damage in the right kneecap, requiring hospitalization.",1
"An employee was walking to his vehicle in the parking lot when he slipped and fell on ice, breaking his ankle.",1
"An employee was walking down stairs, slipped on ice and fell breaking two ribs and puncturing a lung.",1
"On December 29, 2017, an employee was walking down a grocery store aisle when she tripped and fell to the floor, breaking her right leg.",1
"An employee was installing floor trusses on the second level of a residential construction site. The employee was walking on the top plate of a framed and braced wall, marking the location of floor trusses. When the employee stepped onto the bump wall, it became unstable and the employee fell approximately 10 feet to the ground below, fracturing a tibia and fibula. Fall protection was not worn at the time.",1
An employee was sliding a pallet off of a truck when his finger was caught between the plastic ties and the load. Approximately one-quarter of his finger was amputated.,1
"On December 28, 2017, an employee slipped and fell on ice while walking to her vehicle after work, injuring her ankle and requiring surgery.",1
"An employee was using a gangway ladder to access a barge when the bolt sheared off the ladder, causing the gangway and the employee to fall 6 feet. The employee suffered fractures.",1
"An employee was setting up a coater machine to run an order for a customer. While he was attempting to wipe off grease from a roller, his right hand contacted the roller and his thumb was pulled into the pinch point between rollers. His right thumb tip was crushed (some skin removed) and had to be surgically amputated to the first knuckle.",0
"An employee was installing HVAC equipment in the attic of a home when he stepped onto an un-decked section of the attic and fell through the ceiling to the floor approximately 12 feet below. He suffered several fractured ribs, a fractured left forearm, a right wrist injury, and facial lacerations above his left eye and on his lower lip.",1
"An employee tripped over a rug while walking and suffered a hip fracture, requiring hospitalization.",1
"An employee was assaulted by a trespasser while operating a horizontal milling station, suffering a broken jaw and requiring hospitalization.",1
"An employee was delivering a load of peanut oil in a food grade liquid oil bulk tank. While he was disconnecting the hose from the truck's tank, he reversed the pump flow to remove the excess oil from the hose. The hose plunger was not inserted at the time. When the employee attempted to re-insert the hose plunger, the suction of the pump caught his left index finger between the pump and the plunger, crushing his fingertip, which had to be surgically amputated.",0
"An employee was attempting to unclog a palletizer when the machine moved up and contacted the employee, causing a soft tissue injury that required hospitalization.",1
An employee was testing an electrical circuit for a solar panel installation when the employee was shocked and burned by an arc blast.,1
"An employee was measuring a steel beam held by two other employees when one of the employee's lost grip on the beam, allowing it to fall and crush the finger of the employee taking measurements.",1
"An employee was exiting a harvester when his foot became stuck between the harvester steps, causing him to fall to the ground. He landed on and fractured his arm.",1
"An employee was changing a forklift cylinder. The employee was gauging the distance from the cylinder to the forklift mast through a hole with his left index finger when he asked a coworker to lower the forklift's mast. As the mast lowered, the employee's finger was caught between the mast and the cylinder, amputating the fingertip.",0
"An employee was working on a mechanical salt spreader (attached to a salt truck) when the salt spreader activated and hit the employee's right hand, breaking it.",1
"On December 29, 2017, at approximately 11:00 a.m., an employee was attempting to pull plastic through a plastic cutting machine when the machine blades closed on and amputated approximately 1/8 of his left middle fingertip.",1
An employee was clearing a jam on a machine and suffered an amputation injury.,0
"On 12/29/2017, an employee was working on a conveyor system when his right thumb was caught and lacerated in a transition point on the belt. His right thumb tip was partially amputated.",0
"An employee was backing a guest electronic conveyance vehicle out of a van with the lift positioned at ground level when he fell approximately 2 feet, striking his head on the ground. He was hospitalized.",1
"An employee was responding to a call of suspicious behavior of a potential shoplifter in the liquor department. When he arrived at the liquor department, the suspect picked him up off his feet and slammed him to the concrete ground. He was hospitalized for head trauma.",1
"An employee was unloading and lowering a waste container at a customer's location when it struck ice. The employee's finger was then caught between the container's trunnion bar and the truck, suffering a fracture and ligament/tendon damage that required hospitalization.",1
"An employee was performing maintenance on a coil tubing unit, removing a bad section of coil from a reel. While trying to clear a jam in the large coil, the injured employee was struck by the coil, suffering a fractured ankle and elbow.",1
An employee was cleaning a screw auger and got his right index finger caught in the auger resulting in amputation of the finger.,0
An employee fell from a flatbed trailer to the ground while securing a load. He landed on his right leg and injured his pelvis.,1
"An employee exited a truck and was walking when he tripped over a snow-covered wheel chock and fell to the concrete ground, fracturing a hip.",1
"An employee was working off a ladder while taking a measurement for downspout strap placement. He was approximately 14 feet high when the feet of the ladder kicked out, causing him to fall to the ground. He was hospitalized.",1
"An employee struck a rock while skiing and fell to the ground, fracturing a tibia and fibula and requiring hospitalization.",1
"While performing concrete form work from a scissor lift, an employee was caught between the ceiling and the lift, suffering a fractured jaw.",1
"On December 29, 2017, at approximately 11:30 a.m., an employee was operating a chipper when a piece of wood became stuck in the mouth of the chipper. As he was attempting to pry the wood loose, he slipped and his left hand went approximately 20 inches into the mouth of the chipper and contacted the moving knives, amputating the index and middle fingers on his left hand. The chipper was running at the time of the incident.",0
"An employee was operating a table saw to cut metal when the metal became caught in the machine and kicked the employee's right hand into the blade, lacerating the third, fourth, and fifth digits.",1
An employee was using an industrial-size table saw to cut a piece of recycled wood when the saw hit a nail in the wood and propelled the nail into the employee's forearm. He was hospitalized and had surgery.,1
"An employee was unloading a moving truck when he fell from the back of the truck to the ground, fracturing his wrist.",1
An employee was cleaning and making adjustments to a punch press machine and partially amputated four left-hand fingers.,0
"An employee was placing a felt roll into a staging cradle with an overhead crane when his finger was caught between the roll and cradle, resulting in a right pinky finger amputation.",1
"A driver was pushing a pallet jack loaded with milk through a set of double doors. The pallet jack then impacted and pushed a shopping cart into an employee, pinning the employee against the wall. The employee was hospitalized with broken ribs.",1
"An employee was operating an excavator to load off-road trucks with soil. He slipped while dismounting the excavator, causing him to lose grip of the grab bar and fall to the ground. He attempted to break his fall and fractured his right wrist.",1
"On December 30, 2017, at approximately 3:30 PM, an employee was attempting to clean clogged meat from a drain on a meat stuffer machine when a grinder unit in the drain caught his right index finger, amputating it to the first knuckle.",0
"On 12/30/2017, an employee was pushing an empty wheelchair out of the hallway when she fell forward onto her left arm, striking the wheelchair and the floor.",1
"An employee was standing on the rear step of a truck when he lost his footing due to ice and fell to the ground, injuring his shoulder and breaking his forearm.",1
"An employee fell approximately four feet from a flatbed truck to the ground while trying to secure a load, suffering pelvic fractures.",1
An employee slipped on ice and fractured an ankle.,1
"An employee was serving as an expeditor on a loading dock and checking out a truck driver who had finished his load. The dock door was open and as the truck moved away from the dock, which was approximately 4 feet high, the employee fell off the trailer. The employee was hospitalized with a head injury and a possible tailbone injury.",1
An employee fell approximately 10 to 12 feet and landed on his feet. He was hospitalized with a heel or foot injury.,1
"An employee suffered a dislocated shoulder while lifting a case of product. The employee then suffered a negative reaction to medication provided, requiring hospitalization.",1
"An employee was operating a grader and then stopped to climb out. He lost his grip on the handle and fell to the ground, landing on his right shoulder. He fractured his right scapula and humerus.",1
An employee was cutting pig's feet on a vertical band saw with a boning blade. The employee's hand was pushing the pig's feet into the blade when it amputated the employee's right thumb.,0
"An employee was attempting to clear a product jam from a roll mill when his left hand became caught in the machine, amputating four fingers.",1
"While washing floor mats, an employee slipped and fell on the wet tile floor. The employee suffered a right leg fracture and head laceration.",1
"An employee was exiting his truck when the grab handle broke. He then fell to the ground and struck his head, fracturing his skull and rupturing his ear drum.",1
"An employee was loading washers when she tripped over a bag of laundry that was on the floor. She fell on her left hip and leg, fracturing her femur.",1
An employee was unloading a truck when he had a seizure during which he fell and broke his nose.,1
"On January 1, 2018, an employee slipped and fell on ice in the parking lot, suffering memory loss, a headache, and a suspected minor brain bleed.",1
"On January 1, 2018, at approximately 12:15 p.m., an employee was operating a bulldozer to build a logging road above a high wall when the bank gave way. The dozer slid and rolled at least once. The employee sustained a fractured right femur and was hospitalized.",1
An employee was entering the facility through a roll-up door when a forklift driver reversed and ran over the employee. The employee suffered a broken right hip and left foot.,1
"On January 2, 2018, an employee was retrieving a 14 ft. 2x4 board from machine he was operating when his hand slipped and was caught between the board and machine. His left ring fingertip had to be surgically amputated.",0
An employee was assaulted by a customer that came into the store. The assailant forced the sales clerk outside and proceeded to bang her head against a gas pump. The customer then beat her multiple times with his fists and ran over the employee with his car. The employee was hospitalized.,1
"A temporary employee was running a jackhammer to break up concrete around metal beams when the jackhammer jumped up then came down. The employee's left hand was then caught between the jackhammer and a metal beam, amputating the middle and ring fingers at the first knuckle.",0
"An employee was trying to reduce the high liquid level on the site-glass when a compress exploded, causing second degree burns to 5 percent of the employee's body.",1
"An employee was guiding a trash pump that a crane was moving into place for a concrete pour. The employee had to climb onto the trash pump base to release the main block hook from the wire rope rigging. As he grabbed the rigging with his right hand, his footing slipped and he grabbed the top frame of the trash pump. In his efforts to keep from falling, he pulled the rigging (still attached to the main block) toward him, which caused the hook to amputate his left little fingertip.",0
"On January 2, 2018, an employee was operating a crane to move a scrap bin to a dock when the scrap bin struck some steel and began to rotate. As the employee attempted to stop the bin from rotating, the employee's pinky finger became caught between the scrap bin and a table machine, resulting in an amputation.",0
"An employee was helping a coworker clean an area when she noticed an airlock was clogged up. As she attempted to unclog it, the paddle inside the airlock amputated three of her right-hand fingers.",0
"On January 2, 2018, an employee was moving a cart filled with parts weighing 38 pounds when the parts slid off the cart and onto his legs. He was pinned between the parts and a machine, breaking both legs.",1
"An employee was operating a boring machine in a trench box when the bit became stuck and the torque of the machine caused it to tip over. The employee was then caught between the machine and the trench box, bruising his right side.",1
"An employee was adjusting a rack to the center of a cart. When the rack was lifted, it came down on the employee's right hand, amputating the middle fingertip.",0
"An employee tripped while stepping over a guardrail and fell to the same level. The employee tried to brace for the fall and impacted the concrete floor, fracturing the left humerus in the shoulder area.",1
"An employee was working inside an 8' x 26' steel trench box and was helping an excavator operator install a 30"" ductile iron pipe. He directed the track excavator operator to place a bucket of stone bedding for the next pipe to be installed. The excavator operator dumped the bucket of stone into the trench and began to level the stone. The employee was then caught between the excavator bucket and the bell of the pipe, suffering a fractured left leg, fractured ribs, a fractured pelvis, and punctured lungs. He was hospitalized and had surgery.",1
"At approximately 19:00 PM on January 2, 2018, an employee was delivering mail along a rural route when he noticed he was off on the right side of the road. As he tried to pull the vehicle back onto the road, he lost control and it overturned. He was ejected and pinned under the vehicle, suffering four broken ribs, a broken collarbone on the right side, and injuries to his right arm and wrist. He was hospitalized.",1
"An employee was spray painting polyurethane onto a tank from an extension ladder. The ladder slipped on wet paint, causing the employee to fall approximately 5 to 6 feet onto the concrete below. He suffered a head laceration, requiring hospitalization and surgery.",1
An employee was helping children get onto a bus when she slipped on water and a stone on the bus walkway. She fell to the bus floor and broke her ankle.,1
"On January 2, 2018, an employee was performing maintenance on a valve when the valve closed and amputated the employee's right pinky fingertip.",0
"An employee had to go inside an HVAC unit to conduct troubleshooting and repairs. The employee shut off power to the HVAC unit and entered it. The employee placed a hand on the box, which slipped off. The employee’s hand then contacted the HVAC unit’s belt and pulley, suffering a laceration and tissue damage to the right index finger and small cuts to the middle and ring fingers. The employee was hospitalized. The HVAC unit was not locked/tagged out and the blower unit had not come to a complete stop at the time of the incident.",1
An employee was setting up an extrusion machine when the employee's right index finger entered a pinch point and was partially amputated.,0
"An employee was about to exit a truck trailer onto a loading dock when the truck pulled forward, causing the employee to fall 4 to 5 feet into the loading dock well. The employee suffered right tibia, right fibula, and left heel fractures.",1
An employee was working on a press brake when the employee's left hand became caught and crushed in the press brake.,1
"An employee was setting up a warming tent at a job site when a work truck struck and pinned the employee between it and a 54-inch reamer. The employee's lower right leg was crushed, requiring hospitalization.",1
"An employee fell while breaking down inbound product, suffering a hip injury and requiring hospitalization.",1
"An employee was eating lunch while sitting near a space heater. The heater then ignited his jacket, causing second and third degree burns to his back and hands.",1
"On 1/2/2018, an employee's left foot became caught between a warehouse rack and a stand-up forklift. His foot was cut open and required hospitalization.",1
"An employee was delivering mail on her route when she slipped on an icy curb and fell, suffering a broken ankle.",1
"An employee was using a firehose to clean the floor between slabs of granite when a slab fell off its support and struck the employee. The employee suffered a crushed pelvis, left hand injuries, and multiple rib fractures.",1
"An employee was performing maintenance on an air handler unit when the employee's right hand came into contact with the air handler drive. The employee's glove and hand were then pulled into the pulley, amputating a finger.",0
"An employee was operating a die press to blank silver strips when the employee's right hand became caught in the blanking die, amputating the index fingertip.",0
"An employee fell off a 10-foot ladder to the concrete sidewalk below while fixing a sprinkler head, breaking both ankles.",1
"An employee was exiting his vehicle to deliver cotton seed at a facility when he stepped on a concrete trap and tripped. He fell to the ground and fractured his left leg, requiring hospitalization and surgery.",1
"An employee was taking out a screw from a roof panel when he fell from the roof, breaking his ankle/foot and requiring hospitalization.",1
"An employee was unjamming a screw auger when his right hand became caught in the auger. He suffered a traumatic laceration and fracture to his right hand, requiring hospitalization.",1
"An employee dumped a load into a hamper and was standing behind the truck when a cam flew out of the crushing part of the hamper and hit the employee's jaw, crushing it.",1
"An employee fell while walking down an unobstructed hallway, suffering a fractured hip and requiring hospitalization.",1
"An employee tripped over a space heater while retrieving a package and fell to the same level, suffering a concussion.",1
"An employee was using an acidic solution to clean an indoor car wash when he received chemical burns to his right hand, requiring hospitalization.",1
"An employee was removing condensate in a pipe that runs through a combustor when a flash fire occurred, burning the employee's face and hands.",1
"An employee was working on a light fixture when the bulb broke and cut his right little finger. The employee wrapped his hand initially, but then unwrapped it to look at it and fainted.  The employee fell and hit his head on the baggage rack before hitting the floor and having a seizure.",1
An employee was descending a carpenter bracket scaffold. The scaffold shifted and the ladder moved causing the employee to lose balance and fall 20 feet. The employee sustained a broken right leg.,1
"An employee was working inside when an outside driver lost control of her vehicle and crashed into the building. The vehicle hit a wall and caused a toolbox to propel into the air and strike the employee, who suffered fractured legs.",1
"An employee was on a catwalk attempting to close a hatch near a shroud that was releasing concrete. The employee stepped from the catwalk to the shroud and was about to tie off a safety harness and lanyard when two bolts on the front of the shroud failed and the employee fell to the ground. The employee suffered right elbow and lower lumbar fractures, requiring hospitalization.",1
"An employee was helping a customer in the parking lot. The customer's car hood was up and the employee was leaning into the engine compartment when the customer decided to start the engine. A fan or belt injured the employee's right hand, resulting in an amputation to the index fingertip.",1
"On January 3, 2018, an employee was checking dampers on an air handling unit when his jacket became caught on a maintenance door. As he was attempting to free himself, the door slammed onto his left ring fingertip, amputating it.",0
"An employee was starting to ventilate a tractor trailer tanker. Anhydrous ammonia vapors were to be ventilated before filling the tanker with propane. When the employee started to hook up the fan, leftover liquid anhydrous ammonia in the lines splashed him and caused first and third degree chemical burns.",1
"On January 3, 2018, an employee was feeding/aligning a steel strip on an automatic welder. The employee was inside the welder attempting to remove a label from a steel strip when the welder operator activated the welder, which closed on and fractured the employee's right femur.",1
"An employee slipped on ice while exiting a truck and impacted the ground, breaking a leg and requiring surgery.",1
An employee was installing handrails on a scaffold when he fell approximately 10 feet to the ground. He was hospitalized with a fractured neck.,1
"An employee was walking from her desk to a printer when she possibly tripped over a plastic chair mat and fell to the floor, breaking both humerus bones.",1
An employee was walking across the hall to get coffee and water when she stumbled and hit the right side of her head on the wall before falling to the floor. She suffered left and right arm fractures and exacerbated a right knee injury.,1
An employee was riding his bicycle and suffered a heart attack.,1
"An employee climbed a 14-foot straight ladder in a utility space to reach and close a compressed air supply shut-off valve. As he was reaching out, the ladder kicked out from beneath him and he fell approximately 10 feet to the floor, landing on and fracturing his right hip.",1
"An employee was collecting rejected mail from a conveyor system and transferring it to another conveyor system using a small mail bin when the bin hit a metal post. Her body then twisted, resulting in a fractured left femur.",1
"While repairing a roof, an employee tripped over a 10-inch parapet wall at the roof edge and fell approximately 13 feet to the ground, suffering broken vertebrae.",1
An employee was exiting a locker room when a forklift ran over and broke the employee's right foot.,1
An employee was changing a drill bit when the employee's hand was caught in the drill bit.,1
"An employee was putting a truck lift gate in the locked position when his left pinky finger was caught between the truck bed and the lift gate, amputating 1/3 of the digit.",0
"An employee was working on a metal stamping press. The employee's right hand was in the point of operation when the press engaged, amputating the index fingertip and damaging the middle finger.",1
"Employees were trying to thaw and open a frozen valve on a tanker. The tanker truck engine was running in the shop. One employee vented the tank and released volatile hydrocarbons, causing the engine to run away and catch fire. Other volatiles exploded, blowing the building apart and igniting the tanker engine. The injured employee had just started to run out of the building when the explosion happened. The force of the explosion caused the employee to be thrown approximately 20 feet from the building, landing on the frozen ground. The employee suffered burns to the face and hands, rib fractures, and a collapsed lung.",1
"An employee had approached a boom truck to speak with a co-worker when his hand entered the pinch point on the truck, amputating one entire finger and two fingertips.",0
"While exiting the lunch room, an employee tripped on a runner rug and fell down three steps (approximately 24 inches) to the concrete floor. The employee sustained internal head bleeding.",1
"An employee was on a ladder picking product for shipping when he fell to the floor and broke his collarbone, requiring hospitalization.",1
An employee was walking near another employee who was cutting a tree stump with a chain saw when the saw kicked back and hit the first employee. He suffered a laceration to his left shin that required stitches and overnight hospitalization.,1
An employee was operating a triple pallet jack when his right foot was caught between his triple pallet jack and a stationary triple pallet jacket. His right toes were amputated up to the metatarsal.,1
An employee turned off an auger at the bottom of a ribbon blender to find pieces of a plastic bucket lift that had broken and fallen into the ribbon blender. The employee went around and had opened the drain cover of the auger to retrieve the pieces when the auger activated and amputated the employee's left thumb. The auger was not locked out/tagged out at the time.,0
"An employee was walking to a dumpster to throw away trash when she slipped and fell on ice, injuring her hip and requiring surgery.",1
"An employee's hand was on a paint can that was on a paint shaker machine when another employee activated the machine. The employee's right ring finger was then caught and smashed in the machine, amputating the fingertip.",0
An employee installed conduit and was descending from a ladder when he fell and hit his head. The employee suffered a seizure after the fall and lost consciousness. He was hospitalized.,1
"An employee was moving a drum barrel from a pallet with his hands when the barrel tilted coming off the pallet, pinching and crushing his finger between the barrel and the wall.",1
"An employee tripped and fell down several stairs while carrying equipment, landing on the concrete floor and sustaining head (possible concussion), rib, and back injuries.",1
An employee's left index finger was smashed between a ratchet handle and measuring rod while doing a hot tap. The first digit of the employee's finger was amputated.,0
"On January 4, 2018, an employee slipped on black ice and fell to the pavement as she was leaving work. She suffered fractured ribs and was hospitalized.",1
An employee was walking down a stairwell when she stepped off a step and fractured her right ankle.,1
"An employee was unloading paneling from a truck when the paneling fell on him, knocking him to the floor of the truck trailer. He suffered a concussion and lower back injury, requiring hospitalization.",1
"An employee was installing test equipment on an engine and climbed a 6-step ladder to remove the electrical connectors. As the employee was reaching to disconnect the electrical connector, the ladder pushed outward from underneath the employee. The employee then fell 5 feet from the top step and suffered a contusion, concussion, and chest abrasion.",1
"On January 4, 2017, at approximately 4:50 a.m., an employee used a stand-up forklift to place a pallet onto a storage rack. He was backing away from the pallet when his right heel was caught and lacerated between an upright behind him and the operator compartment of the lift. He required stitches and overnight hospitalization.",1
"An employee slipped on icy stairs outside and fractured his elbow, requiring hospitalization.",1
An employee was lowering the safety guard of a mixer with his right hand and pushing ingredients inside the mixer with his left hand when his left hand was caught and fractured between the mixer and the safety guard.,1
"An employee slipped on an icy walkway and fell, hitting his head on the ice.",1
"An employee was polishing a metal bar on a manual lathe with an emery cloth when the cloth became caught around the rotating bar, consecutively catching the employee's glove. The lathe was rotating at 566 rpm at the time of the incident. The employee's right index finger was amputated to the first knuckle.",0
"While sweeping up trimmings near a line, an employee slipped and fell on a piece of plastic, fracturing the left ankle and requiring hospitalization.",1
"An employee was standing near a forklift that was carrying a cage. As the employee braced himself on a nearby angle iron, his finger was caught between the cage and the angle iron, amputating his left ring fingertip.",1
"An employee was welding on a flange when his shirt caught fire. He was burned on the face, right hand and arm, and right leg, requiring hospitalization.",1
"An employee was unloading steel parts from a storage bin, which was about 4 x 8 x 3 feet. During the unloading process, the weight in the bin shifted and the edge lowered onto the employee's right boot, smashing his right pinky toe and resulting in a partial amputation. He was wearing steel-toe boots at the time.",0
"An employee was helping to unload a conduit bending machine from his van onto a forklift. The weight of the forklift shifted, and his finger was caught between the forklift and the bender. He suffered a transphalangeal amputation of the right ring finger.",0
An employee suffered smoke inhalation that exacerbated the employee's asthma while exiting the building during a small fire.,1
"An employee was unloading chemicals from his truck when they splashed his eyes, face, and head, causing chemical burns.",1
"On 1/4/2018, an employee was securing a part on a flatbed tractor trailer when the employee fell while descending the truck, breaking ribs and an arm, requiring hospitalization. A ladder was not used at the time of the incident.",1
An employee was working from a ladder and fell breaking the right leg.,1
"An employee was removing a mini loader from a trailer when it overturned and landed on top of him. He suffered a broken face, five broken ribs, a broken right arm, a broken lower back, shoulder fractures, chest fractures, and a shattered right elbow, requiring hospitalization.",1
"An employee was standing on a rig floor when equipment fell off a mast as it was erected and struck the employee, causing significant head and neck injuries. The employee was hospitalized.",1
"An employee delivered a full load of concrete to the jobsite. After noticing a pallet was uneven, he climbed onto the bed of the 18-wheeler and tripped over the pallet, fracturing his left femur.",1
"An employee fell off a ladder while applying caulk under stairs, requiring hospitalization.",1
"An employee was walking down a ramp and slipped on an icy surface, suffering a left leg fracture.",1
An employee was troubleshooting a coiler machine when a damaged pneumatic piston actuated and amputated the employee's right middle fingertip.,1
"An employee was gluing PVC duct along the shoulder of a runway when he was struck by a pickup truck and thrown about 6 feet, hitting his head on the pavement. He suffered head lacerations, a broken left ankle, and a broken nose, requiring hospitalization.",1
"The employee had been driving a fork truck to load empty cans (product). The injured employee then left the fork truck as another employee was reversing a fork truck nearby. He was in the other fork truck driver's blind spot, and the fork truck driver pinned him between the two fork trucks. He fractured his lower left and right legs, requiring hospitalization.",1
"On 01/04/2018, at 10:45 AM, an employee was helping another employee attach a canvas from a ladder when he lost his balance and fell about 4 feet to the concrete floor, fracturing his left hand and wrist. He was hospitalized.",1
An employee was stacking 12 x 16 boards when a board came down the slide and struck his finger. He suffered a right middle fingertip amputation.,0
"An employee was putting pipe on a hanger rack using a ladder when the ladder shifted. The employee then fell 5 feet to the cement/concrete floor below and suffered a broken scalp, broken shoulder, and finger injuries, requiring hospitalization and surgery.",1
"An employee was changing a truck battery with a clamp when his finger became caught between the battery and clamp. As he pulled his hand back, his left middle finger was lacerated, requiring hospitalization.",1
An employee was tied off from a railing performing work when an explosion occurred. The employee suffered severe burns and was hospitalized.,1
"An employee was about to go outside when she saw mail on the floor near the door. She picked it up and was heading back in with the mail when she tripped and fell onto the carpet, breaking her femur.",1
"An employee slipped and fell on an icy patch on the ground at the work site, breaking the left femur.",1
"An employee was cutting through a weld on a glass furnace using a grinder with a cutting wheel. The cutting wheel broke after getting stuck between two pieces of metal and the employee lost control of the grinder, which then scraped the employee's chest and stomach and lacerated the right leg above the knee. The employee was hospitalized.",1
An employee had jacked the cab of a semi-truck up to get underneath it and perform maintenance when it slipped off the jack and struck the employee.,1
"An employee fell to the floor while closing a dock door, breaking the right femur.",1
"An employee tripped and fell to the ground while walking, breaking a wrist.",1
"An employee was helping to move a large metal plate with a forklift when the plate slipped and crushed the employee's right leg, requiring hospitalization.",1
"A metal pipe fell off a forklift and struck a nearby employee, breaking his foot. He required surgery.",1
An employee was using a band saw to cut a small metal piece when the piece became wedged by the saw blade and flipped with such force that it amputated the employee's right index fingertip.,0
"On January 5, 2018, an employee was cutting cardboard on a table saw when the rotating saw blade amputated the employee's fourth fingertip.",0
"While loading a loader onto a flatbed trailer, an employee lost control of the equipment, which then fell off the trailer to the ground. The employee was caught between the loader and the ground, suffering a fractured arm, bruised ribs, punctured lung, and neck injury. The employee was hospitalized.",1
"An employee was running a moulder machine when it jammed. The employee turned off the equipment, opened it, and was trying to clear the jam when the machine amputated a finger. The moulder machine had not completely stopped and was not locked out/tagged out at the time of the incident.",0
"An employee was attempting to warm up near a stand-up propane heater when his buttocks and the back of his thighs contacted the heater housing. The interior flame then ignited his denim jeans, causing burns to his lower body.",1
"On January 5, 2018, at approximately 2:30 p.m., an employee was attempting to unjam a board from a machine when the employee made contact with the hogger head wheel, resulting in an amputation to the right index finger. The machine was not locked out at the time of the incident.",0
An employee was helping two other associates close a door to a cardboard baler. The injured employee and a coworker were pushing on the door while another was operating the baler controls. The injured employee instructed a coworker to close the hydraulic clamp that closes the door. The hydraulic clamp crushed the employee's four left-hand fingers (index through pinky) between the door and hydraulic clamp. The fingers were amputated.,0
"An employee fell from a ladder to the ground at a customer's house, suffering clavicle and rib fractures, brain bleeding, and loss of consciousness.",1
"An employee fell 15 feet through a skylight while performing roofing work, suffering multiple face and skull fractures, as well as a right hand laceration.",1
"An employee was operating an electric pallet jack when he could not stop before running into a pole. He jumped off the pallet jack and his ankle was caught between the pallet jack and the pole, resulting in a compound fracture.",1
An employee was warming up a hydraulic cylinder with a propane heater when hydraulic fluid shot through a pinhole leak in the feed line toward the propane heater and ignited. The employee suffered burns to the face and hands.,1
"An employee was disconnecting a steam pipe that led from a building to a truck that was carrying liquid meat. When the employee disconnected the pipe, residual steam in the pipe released and caused second degree burns to the employee, requiring hospitalization.",1
"An employee slipped and fell on a wet floor inside a work site building, suffering a broken femur. The weather was icy and snowy at the time and the floor was wet from employees entering from outside.",1
An employee was climbing up a ladder to clean snow off a truck when he fell to the ground.,1
"An employee was walking when her leg became caught in a green strap that was attached to a pallet. She fell and fractured the orbital area of the left side of her face, requiring surgery.",1
"An employee was trying to apprehend a suspect when the employee's arm became caught in the suspect's car door. The suspect then sped off and the employee struck a parked car, suffering a broken arm and leg.",1
"An employee was walking on a mulch pile to check for fire when a portion gave out. The employee then fell farther into the burning pile, suffering second degree burns to his right leg and requiring hospitalization.",1
"An employee was helping another employee get a lid open on a railcar when he lost his footing and fell from the railcar to the ground. He broke his left ankle, left wrist, and right knee/tibia. Fall protection was not worn at the time.",1
"An employee was preparing parts for treating in a salt bath when molten salt was propelled from the salt pot, causing second and third degree burns to the employee's hands and abdomen.",1
"Employee #1 was walking in an area where employee #2 was nailing a bottom plate with a nail gun. A nail from the nail gun bounced off a board, hitting employee #1 in the neck and causing windpipe trauma.",1
"An employee was standing on a step stool and locking out/tagging out an air valve on a bracket welder machine when her right second digit was caught between the frame and doors (guarding) on the back side of the machine. When she stepped down, her second digit fingertip was amputated to the first knuckle.",0
An employee was shoveling snow and experienced dizziness and chest pains. The employee pulled a muscle.,1
An employee was spotting for a pipe as an excavator moved it from the pipe yard to the fabrication area. His foot then became stuck in mud and the excavator ran over his foot. He sustained a contusion to his right leg and was hospitalized.,1
An employee was using a circular saw to cut wood for a cooler panel when the saw amputated the employee's left index finger.,0
"An employee was attempting to warm himself near a commercial floor heater. As he walked away from the heater, he felt heat close to his neck and realized his clothes were on fire. He rolled to extinguish the flame, but his left and right shoulders received second and third degree burns and both hands suffered first degree burns.",1
"An employee was placing a part on a jig for welding when the part slipped out of his hand and crushed his left middle fingertip, resulting in an amputation.",1
An employee had just delivered mail to an establishment and was returning to a mail vehicle when the employee slipped and fell on the icy ground. The employee suffered a right ankle/foot injury that required hospitalization and surgery.,1
"On January 6, 2018, at approximately 2:50 p.m., an employee was inspecting storage units when he slipped and fell while walking on a slightly inclined grassy area. He broke his left ankle and the bone above it, requiring hospitalization.",1
An employee was delivering mail when he slipped and fell while walking down ice- and snow-covered steps at a residence. He suffered two small lower back fractures.,1
An employee was performing a post-trip inspection of a truck when he slipped and looped his right arm through the truck handle bar to steady himself. His arm broke.,1
"An employee fell to the ground while loading tower crane sections on a flatbed semi trailer, breaking the right hip and requiring hospitalization.",1
An employee was stabbed by a coworker.,1
An employee was setting blocks of wood down for a forklift driver when the forks crushed his steel-toe boot. His left big toe was amputated as a result.,1
An employee was reaching into the back of an EMS SUV vehicle when the hatch door closed and struck her head. She suffered a C6-C7 neck injury and was hospitalized.,1
An employee was carrying a hot liquid in a culinary area when it spilled and burned his right foot.,1
"A reactor overflowed and hot liquid contacted an employee's body, causing second and third degree burns that required hospitalization.",1
An employee was driving a tractor when it rolled over on her. She suffered a fractured hip and collapsed lung.,1
"An employee was getting ready to climb a ladder to a chemical float trailer. He had put his right hand on the lower section of the ladder when it shifted, causing his right ring finger to be caught between the ladder and the trailer. His fingertip was amputated.",0
"An employee was unloading a box truck when the truck left the dock area prematurely. The employee then fell off the dock, suffering a dislocated right shoulder and broken right leg. The employee was hospitalized.",1
"An employee was feeding wood pieces into a conveyor when his fingertip was pulled into a nip point between a chain and sprocket, resulting in an amputation.",0
"An employee was climbing an extension ladder to inspect a roof when the bottom of the ladder slipped, causing him to fall 15 feet to ground. He broke his elbow and pelvis. The bottom of the ladder was placed on top of plastic sheeting at the time of the incident.",1
"On January 7, 2018, at about 1:15 p.m., an employee was struck by a truck while walking between truck bays. The truck dragged the employee, who suffered whole-body and hand injuries.",1
"An employee was changing out an expansion joint with another employee. While they were breaking the bolts loose, oil-based mud leaked out and burned his skin. He was hospitalized.",1
An employee was attempting to clean out cotton that had accumulated in a gin's lint cleaner when his arm became caught in the lint cleaner.,1
"An employee was reaching up to get a case of product off a shelf when he lost his balance and fell on a milk crate and the floor. He suffered pain/soreness in his upper back, ribs, and chest.",1
An employee was hooking a trailer dolly to a second trailer when he slipped on some black ice and fell on his right hip. He experienced severe hip pain and was hospitalized with a possible hip fracture.,1
"An employee tripped and fell while stepping out of a vehicle, fracturing her arm.",1
"An employee was unjamming a grinder when the blades moved again, cutting and breaking the employee's left ring and middle fingers.",1
"An employee was jackhammering asphalt with his back to a backhoe. The backhoe bucket was resting on the blacktop to the right of the backhoe. The backhoe operator was reaching down for a head warmer on the cab floor when the operator's sweatshirt pocket caught the stick control. This action inadvertently moved the control lever for the ""swing arm"" and ""bucket."" The backhoe bucket then moved and pushed the employee who was jackhammering asphalt about 2 to 3 feet until he lost his balance and hit the ground. The bucket continued pushing him for approximately 4 to 5 feet. During that time, the bucket also rose, and the tooth contacted the outer portion of his right boot. The bucket continued to move up and over his boot. The operator then stopped the bucket, but it remained on top of his foot. The bucket's weight (approximately 300 pounds) crushed and lacerated his foot.",1
"An employee had just finished working on top of a main engine, tightening bolts to the exhaust system. He was climbing down the main engine when he slipped and fell to the next lower level (approximately 6-7 feet). His torso struck a guardrail and he suffered a ruptured spleen, requiring hospitalization.",1
An employee was walking to her car when she slipped on ice in the parking lot. She broke her hip and suffered a contusion.,1
"An employee was monitoring a section of production between the trimmer and edger saws when he noticed boards were jamming on the overhead conveyor between the saws. He stepped up onto a sheet metal barrier that was 22 inches high and then slipped and fell. His face struck an electrical closure (junction box) that was near the ground, fracturing his jaw and requiring hospitalization.",1
An employee was servicing a propane truck in a garage when a leak from the truck ignited and caused an explosion. The employee was burned severely and hospitalized.,1
"An employee was taking a client to a doctor's appointment when she slipped, fell, and hit her head on the sidewalk, suffering a brain bleed.",1
"An employee was compressing boxes for recycling. While trying to step on a box to compress it, the employee fell and broke an ankle.",1
An employee suffered a thumb amputation while degreasing a mixer.,1
"An employee had just set up and started a new product run on a straight tube machine line. The employee was walking toward the cutter machine on the line when she tripped on an airline that was at the base of the machine near the floor. She fell toward the cutter machine and reached out to stop her fall by bracing the machine. At the same time, a copper pipe (5/8"" or 1"" diameter) was coming out and impaled her right palm, requiring hospitalization. The machine was unguarded at the time.",1
"An employee was walking through a coffee bar when she slipped on coffee creamer on the floor and fell, fracturing her right femur and left elbow.",1
An employee was carrying a container of food product to the cooler when the employee tripped over a box that a vendor left on the floor. The employee fell and fractured the left patella.,1
An employee was pulling a pallet of product with a hand jack. The pallet was stuck to another pallet due to the plastic wrap. His right foot was then crushed by the wheel of the hand jack.,1
"An employee was stringing an overhead powerline of a pulling rig between two towers. When another employee started pulling the wire, the employee maintained contact with the wire and was raised approximately 15 to 20 feet above the ground. He then lost his grip on the wire and fell to the ground, breaking his pelvis and left wrist.",1
An employee was helping to subdue a patient who suddenly became violent when the patient punched her. She was hospitalized with lower back and hip pain.,1
"On January 8, 2018, at approximately 3:00 p.m., an employee was flagging traffic on a two-lane road. A log truck, pulling a trailer with logs, was directed through the work zone. The trailer's outside tires dropped off the pavement, causing the trailer to tip. As the trailer tipped over, the straps holding the logs broke. The employee, standing approximately 20 feet away, began running and was struck by the rolling logs, suffering multiple fractures to the face, hip, pelvis, neck, and back. The employee was hospitalized.",1
"An employee was heating water in a stainless steel work sink to perform a cleaning operation. The water began boiling, so the employee introduced cold water into the bottom of the sink to cool it down. The reaction of the cold and hot water and the force of the water going into the bottom of the sink caused the water to spew out from the sink and splash onto the employee. He sustained second degree burns to the front of both of his legs and a spot on his abdomen and right forearm. The water was estimated to be at a temperature of 212 degrees.",1
"While delivering products to a customer, an employee slipped on snow/ice in the customer's parking lot and broke a wrist, requiring surgery.",1
"An employee was climbing off a ladder onto a roof to install a heat vent when he slipped and fell to the ground, injuring his left leg.",1
"An employee stepped off a forklift onto the warehouse floor, slipped on condensation, and fell. The employee was hospitalized due to a broken right tibia and fibula.",1
An employee powered off a fender forging machine and engaged the pneumatic gauge die holder (cylinder). The cylinder then came up and amputated his finger.,0
"An employee was working in the meat department, slipped and injured his left knee.",1
"An employee was in the restroom, taking out the trash. She was holding the door open with one hand and grabbing the trash with the other when the door closed on her right middle finger, amputating her fingertip.",0
"An employee was returning to a vehicle when the employee slipped on ice and fell to the ground, fracturing the left hip.",1
"An employee was using a gantry crane to remove a concrete vault mold weighing 1,000-2,000 pounds from the forms when it fell on the employee's left hand, amputating his index and middle fingers.",1
"An employee was loading product into a truck when a box of product broke. As he tried to catch it, he fell between the truck and the dock plate and struck the truck bumper, suffering internal injuries.",1
"An employee was operating a brake press to stamp parts when his left middle finger was caught between the punch and the part, causing a soft tissue amputation.",0
An employee fell while walking on a pedestrian bridge.,1
"An employee was clearing dough off a sensor while standing on an elevated platform for a divider. As he was descending a stairway from the divider, he slipped and reached for the guardrail. The guardrail disconnected from the platform, and he fell to the ground, hitting his head. He suffered head trauma and brain bleeding.",1
An employee was aligning key-ways for an assembly of a bull gear with the crankshaft when his right pinky finger was caught between the bull gear teeth and the gear teeth on the end of the pinion. His fingertip was amputated.,0
"An employee was using hoisting equipment to transfer sawed parts to a floor transport when a metal block fell from the hoisting equipment and severely cut the employee's index finger, requiring surgery.",1
An employee slipped and fell on black ice in the parking lot and broke a leg in three places.,1
"An employee was helping a forklift move a crane mat into position when the crane mat slid off the forks of the forklift and fell, striking and breaking the employee's right tibia and fibula.",1
"Employees were in the process of draining material from a mixer through its pneumatically actuated ball valve, which is approximately 3 inches in size and located at the bottom of the mixer. The ball valve was actuated, but material did not flow. The injured employee was trying to un-clog the ball valve when it actuated and amputated the employee's left middle fingertip.",0
"An employee was attempting to hook a log up to a log skidder when a felled tree hit another tree. The second tree then rolled and hit the employee. He suffered a broken left leg and pelvis and an abdomen injury, requiring hospitalization.",1
An employee was attempting to file down buildup on a roller of the glue line machine when his upper right arm was caught in the rollers. He suffered severe lacerations on the outside of his right arm from the elbow to the shoulder.,1
"An employee fell to the ground while attempting to ascend a tree to trim it, suffering lumbar fractures.",1
"An employee had just dismounted from a sanitation truck when he slipped on ice and fell, injuring his ribs and bruising his brain.",1
"On January 8, 2018, at about 11:00 a.m., a temporary employee was assembling equipment and lining up two eyelets on a scissors platform when the equipment amputated his fingertip.",0
"An employee was blowing off pressure on a field natural gas compressor when a pipe about 3 feet long pulled out of the threads and hit the employee, causing blunt force trauma to the face, arm, and shoulder.",1
"On 1/8/2018, a temporary employee was doing demolition work in a bathroom when debris struck the employee in the eye, causing a retinal detachment that required surgery.",1
An employee was performing routine maintenance on an amusement park ride when a hydraulic pin came into operation and amputated the employee's left thumb at the first knuckle.,1
"An employee slipped and fell to the ground while using the restroom facilities, breaking the left femur.",1
"An employee was walking through the production floor when part of a bale of aluminum cans fell and hit him, knocking him to the ground. He sustained a fractured clavicle.",1
"An employee was pulling a flag connected to a tank when the flag broke, causing him to fall backwards. He struck his head on another tank and suffered a concussion with a brain bleed.",1
A temporary employee was attempting to reach wires behind a conveyor when she tripped the conveyor's automatic start. The conveyor then pulled her glove into the conveyor and amputated her left middle finger.,0
An employee suffered a finger amputation while pile driving.,1
"An employee was using a lathe to test a piece of steel when the employee's hand became caught in the moving lathe, amputating a fingertip.",1
"An employee tripped and fell over some wires while standing up at her desk, suffering a fracture.",1
"An employee slipped on ice while delivering mail, breaking an arm and dislocating a shoulder. The employee was hospitalized and had surgery.",1
"An employee was setting up a print machine and attempting to stop a paper roll from turning when the employee's left middle finger was pinched between the roll and the machine frame, amputating the fingertip (no bone loss).",0
"An employee was guiding a third-party truck back into the yard to pick up product when he was pinned between the truck tire and a pallet of product, breaking his right tibia. He was hospitalized.",1
"An employee was using a reciprocating saw and holding the handle/trigger with his right hand. When the reciprocating saw started, it pulled his glove and left fifth finger into the quick lock blade clamp, lacerating and fracturing it. His finger was partially amputated.",0
"An employee was climbing down from a tractor when his foot slipped off the bottom rung. He fell to the ground and broke his hip, requiring hospitalization.",1
"An employee was walking in the work parking lot when he slipped on ice and fell, breaking his hip.",1
"An employee fell to the ground while climbing an extension ladder, breaking a wrist and ribs.",1
"An employee was working from a 4-foot platform ladder, pulling wire, when the wire came loose and he lost his balance. He then stepped 4 feet off the ladder and onto the ground, fracturing his left hip.",1
"An employee was preparing to bolt in two flanges on a 72-inch pipe when his left thumb was caught in the flange, partially amputating his thumb tip.",0
"On January 9, 2018, at approximately 6:20 PM, an employee was carrying items from the stockroom when she tripped over a bushel basket and fractured her left hip.",1
"An employee was bending over in front of a plastic winder when his shirt became stuck on the core containing sticky tape. The sticky core pulled the employee's shirt over his head, which then strangled his neck. He passed out momentarily before regaining consciousness. He sustained multiple injuries in his neck and upper body, requiring hospitalization.",1
"An employee was trying to shift a palette using a cheater bar when the cheater bar gave way and hit his nose, breaking and lacerating it.",1
"An employee slipped and fell while delivering mail, hitting his head on the ground.",1
"On January 9, 2018, an employee was working the pizza line at a facility that had a large heating unit running. The ignition for the burner unit control failed and shut off the ignition unit, but the natural gas remained on.  Employees evacuated the work site and maintenance repaired the burner unit control switch. The employees then returned to work. The next day, the injured employee was hospitalized due to carbon monoxide poisoning.",1
"An employee was attempting to unload panelized walls from a flatbed semitrailer. He was using a pry bar to separate the wall panels when the pry bar slipped out, causing the employee to fall backwards from the semitrailer. The employee struck the ground, suffering fractured neck vertebrae, a concussion, and bleeding from  the mouth and ears.",1
A maintenance employee was repairing a lift cylinder on a load transfer table where resin had built up when the cylinder dropped on the employee's left hand.,1
"An employee was riding a snowmobile in a training exercise when the snowmobile struck a tree, forcing him forward into the steering column of the snowmobile. He broke several ribs and was hospitalized.",1
"An employee was placing straps for a pile of plywood to be picked up by an excavator when the excavator operator released the excavator bucket, which fell and struck the employee's right middle finger. His right middle fingertip was amputated.",0
"An employee was preparing to frame up a wall on the second floor and fell approximately 16 feet through a 5' x 5' opening in the floor. The employee struck the wood guardrail on the first floor. The employee sustained facial fractures, fractured ribs, a fractured hip, bleeding on the brain and a spleen injury. The employee was hospitalized.",1
"An employee was using a metal shear to shear an 8' x 16"" wide aluminum scrap roofing material to 4"" x 4"" test strips when his hand went under the guard and the stops came down and crushed both of his index fingertips. His left index finger required a 5 mm amputation from the tip end of the bone. His right  index finger was debrided.",0
"An employee was opening a bay door when his foot became tangled on the rope that pulls up the door. He then fell to the concrete floor, fracturing his hip.",1
"An employee was attempting to vaccinate a chicken when the chicken got loose. The employee was scratched by the needle while trying to catch the chicken, suffering an infection that required hospitalization.",1
"An employee was drilling holes in a pipe when the employee's sleeve and glove became caught in the rotating drill bit, resulting in right thumb and pinky finger amputations.",0
"An employee was standing on a 6-foot ladder making repairs to an approximately 25' tall x 10' wide x 15' deep air rotation unit when an explosion occurred and knocked him from the ladder. Flames erupted from the unit, causing third degree burns to his face. He was hospitalized.",1
"An employee was standing on a 3-foot step ladder, stowing product in a bin, when the employee fell to the ground and injured the right hip.",1
An employee was reversing a ride-along pallet jack when his leg was caught/pinched between a stack of pallets and the pallet jack. He suffered leg swelling with no broken bones.,1
"While pulling drilling rods, a driller did not stop and hit the crown of a derrick block. The rods then hit a derrickman, breaking his pelvis.",1
An employee was trying to move a wire when an arc flash occurred. The employee suffered second degree burns and was hospitalized.,1
"An employee was exposed to high levels of carbon monoxide while loading a trailer with a forklift, suffering carbon monoxide poisoning. The employee was hospitalized.",1
"An employee was using a walkie rider pallet jack to load cases of beverages into a delivery truck. He lost control as he approached the back of the truck, and his foot slipped off the walkie rider. His left leg was then caught between the front of the walkie rider and the truck bumper, suffering soft tissue damage that required hospitalization and surgery.",1
An employee was removing a boom from a de-limber machine when another employee inadvertently hit the controls to squeeze the machine's grab arm together. The employee was caught in the grab arm and suffered a broken hip.,1
An employee had an allergic reaction to another employee eating peanuts and was hospitalized.,1
The injured employee was attempting to unclog a brush chipper by placing his left hand on top of the cutting wheel and using his right hand to clear out the lower portion of the cutting wheel. The wheel cleared and started turning resulting in a left ring finger amputation just below the fingernail.,0
"An employee was replacing the bottom seal on a garage door. When he removed a roller, tension on the door caused it to fling up. The bottom section of the door struck his face, fracturing his cheekbone.",1
"An employee was adjusting product on a lathe machine when he inadvertently activated the foot trigger. His arm was then caught and fractured in the rotating lathe, requiring hospitalization.",1
"An employee turned to help a member find some product in the deli area and fainted. He fell to the floor and hit his head, lacerating his right eye area.",1
"An employee was loading a new part onto an end milling cutter. The cutter's rotating spindle entangled the employee's right glove and fingers, causing an amputation to a finger.",0
"An employee was installing soffit supports from a walkboard 13 feet above ground level when the employee fell to the ground, suffering shoulder, leg, rib, and back pain, as well as a cut on the head. Safety equipment was not hooked up at the time of the incident.",1
"An employee was sorting trash for recyclables when she slipped on the wet floor and fell to the floor, suffering a concussion and contusions to the tailbone, right arm, and head.",1
An employee was showing another employee a sensor that needed to be changed on an auger when his arm was caught and pulled into the auger. The auger lacerated his right arm and struck an artery.,1
An employee was rigging a column when another beam fell and struck the employee's leg.,1
"A winch drum was sitting on top of a piece of angle iron to keep it elevated. An employee was laying beneath the angle iron, blowing sand off the drum to prep for painting. He then used the drum to pull himself up from the ground. One side of the drum shifted and fell on him, lacerating his left cheek, right thumb, and behind his right ear and breaking his jawbone and right thumb.",1
"An employee was attempting to fix a dust collector when the spinning blades inside the collector amputated the tips of his left index finger, middle finger, and thumb.",1
An employee was manually pushing trail rubber through the nip point of a calendar machine when his right hand became trapped in the nip point. His right hand and part of his wrist were amputated and he was hospitalized.,1
"An employee was cleaning his work area with a blower when he experienced problems with the vacuum system. As he attempted to fix it, the hose fell off. While he was trying to replace the hose, his left hand contacted the fan blade, amputating three fingers and partially amputating one finger.",0
"An employee fell down metal stairs injuring his legs, wrist and head. He was admitted to the hospital.",1
"An employee was on top of a truck attempting to fill it with chemicals when the truck driver pulled away, causing the employee to fall to the ground and break an ankle.",1
"An employee fell on ice while getting out of her vehicle in the parking lot, injuring her head and back.",1
An employee was attempting to wipe lint out of a lint cleaner when his right index fingertip was amputated. The lint cleaner had not completely cycled through at the time of the incident.,0
"An employee was operating a drill when his right thumb came in contact with the running drill bit, damaging his tendon.",1
"An employee was standing on top of a load of rolled steel and spreading a tarp over it when the tarp became stuck on the steel. He then lost his balance and fell approximately eight feet to the ground, fracturing his right hip.",1
"An employee was walking from one maintenance trailer to another when the employee slipped on ice and hit the ground, suffering a concussion. The employee was hospitalized.",1
"An employee stood up to walk around the table in an operating room, hit his head on a surgical light, and was briefly knocked unconscious.  He suffered a head injury.",1
"An employee was starting a parts washer in the heat treat area. The parts washer had been loaded and the door was closing when he attempted to reposition the washer's shroud. The door then came down on his right hand, fracturing several bones.",1
"On 01/10/2018, at 08:00 AM, an employee was operating a dough mixer when she attempted to check the color of the cinnamon inside the mixer with her right hand. The mixer paddle then pinned her right hand against the side of the mixer bowl, fracturing her right wrist and requiring hospitalization. The mixer was still running at the time of the incident.",1
"On January 10, 2018, at approximately 8:00 AM, an employee was removing a mandrel from a press using a hoist and a J-hook when the mandrel became disconnected from the J-hook and fell on the left lower leg (shin) of the employee, causing an avulsion. The employee was hospitalized.",1
"An employee was operating a press brake to bend material. The employee's hand was under the die when the employee's foot applied pressure to the pedal, causing the press to operate. The employee's hand was then caught in the press.",1
"At approximately 8:00 a.m., on 1/10/2018, an employee was signaling an excavator operator who could not see the bottom grade of a box trench to dig farther when he fell approximately 8 feet into the excavation, fracturing a bone in his neck and requiring hospitalization and surgery.",1
An employee suffered a partial amputation of the right middle finger (near the bottom of the nail) while cleaning a pump flange.,0
An employee sustained injuries to the right hand while working with a pallet jack.,1
An employee was standing in the hallway when a client came running down the hall and knocked the employee to the ground. The client also punched the employee's face. The employee suffered fractures to the fourth and fifth vertebrae.,1
"An employee was at her post at a center gate when a male inmate walked toward her. She directed him to turn around and go back to his dorm but he did not comply. She sprayed the inmate with pepper spray and then tripped and fell on the floor as she was walking backwards. The inmate jumped on her and stabbed her twice in the abdomen area with a piece of metal, puncturing her liver. She was hospitalized.",1
"On January 10, 2018, at approximately 9:00 a.m., an employee was salting the concrete sidewalks outside of the hospital when he slipped and fell on the ice. His head struck the concrete, requiring hospitalization.",1
An employee was operating a handheld drill and attempting to drill through a brick wall when his glove was caught on the drill and his left pinky finger was amputated at the first knuckle.,0
"An employee was coming down a 6-foot step ladder when it tilted to one side. As she attempted to correct the ladder, it fell to the other side. She then fell from the second or third ladder rung to the ground, breaking her elbow.",1
"An employee was talking with a mechanic who was doing maintenance on a labeling machine when her left hand was caught in the rollers of the machine while it was running, partially amputating her middle and ring fingertips.",0
"On 1/10/18, an employee slipped on an icy sidewalk while walking into work and fell to the ground, suffering a head injury that required hospitalization.",1
"On January 10, 2018, at 10:20 a.m., an employee was descending a ladder after cutting a second story cable line from a residential address. The first floor cable line was still connected and under tension, which destabilized the ladder during his descent.  Feeling the ladder shifting under him, he dismounted from the fourth or fifth rung up and landed on his side, fracturing his left wrist.  He was hospitalized and had surgery.",1
An employee was installing insulation in a main server room when a flash fire occurred. The employee suffered some burns and was hospitalized for smoke inhalation.,1
"An employee and his coworker were installing a new meter set on a 4-gang meter base to provide electrical service to a multi-residential area. While his coworker went to the company truck to retrieve a new meter ring, he noticed a frog inside the meter base and was attempting to remove it with a pair of pliers when an electrical flash occurred. He sustained second degree burns on his right-hand fingers and was hospitalized.",1
"An employee was starting up a grinder pulverizer when he noticed that water was leaking from the pulverizer.  As he tried to wipe away the water, his fingers became trapped by one of the pulverizer fins. He suffered a hand injury and was hospitalized. The pulverizer was running at the time of the incident.",1
"An employee tripped over a parts cart while picking parts/walking and fell to the ground, suffering a compound fracture to the arm.",1
"On January 10, 2018, at approximately 10:30 p.m., an employee was cutting stretch wrap on a pallet when he tripped and fell to the same level, fracturing his femur. He was hospitalized.",1
An employee was working polish rods on a pump jack and placing clamps on rods when the employee's hand slipped and was caught between the clamps. The employee's right index fingertip was amputated.,0
"An employee was attempting to dismount his pallet jack when he was caught between a pole guard that guarded an entryway and the pallet jack, breaking his right lower leg.",1
"An employee was tightening a belt on a wire draw machine when another employee turned the machine on. The employee's hand was then pulled into the machine, and two fingers had to be surgically amputated.",0
An employee slipped and fell in the back of a truck and fractured a knee.,1
An employee was using power lift equipment (forklift or scissor lift) to load wooden pallets on racks when a pallet fell on the employee's head. The employee suffered fractures in the neck and back and was hospitalized.,1
An employee was placing strap hooks onto D-rings to secure cargo to a trailer when the employee's left middle fingertip was caught and amputated in the hooks.,0
An employee was replacing a cam shaft on an engine when his left middle finger was caught and amputated between the cam and the cam shaft.,0
"An employee was replacing wire in a police sub-station that had been flooded.  As he reached for a wire, he sustained burns to his left hand because the circuit was not de-energized, requiring hospitalization.",1
An employee received an electric shock while working near a crane and powerlines.,1
"On January 11, 2018, an employee was preparing to cut wood using a radial arm saw when he attempted to clear a wood shaving from the back of the blade guard. His right little finger then struck the rotating saw blade and was severely lacerated, requiring surgical amputation.",1
"An employee was walking in a production aisle when a forklift carrying a rack struck her, fracturing her right ankle.",1
An employee was guiding a section of pipe that was being lifted with an excavator so that a connection could be made. The excavator bucket slid down and struck the employee's arm and leg resulting in a left arm fracture.,1
"An employee was struck by a pallet jack, breaking her left hip.",1
An employee suffered a burn to the left side of his face while welding.,1
"An employee changed a tire on a bus and began to lower it by removing the jacks. The second jack was still wedged under the bus, so he attempted to retrieve it.  As he freed the jack, the bus lowered onto his chest, bruising his lungs and requiring hospitalization.",1
An employee was working with piping in the polypropylene unit when a flash fire occurred. The employee received first degree burns on the face and second degree burns on the neck.,1
"An employee was using a crowbar to pry steel from a plate when the bar slipped, causing the employee to lose balance and fall. The employee fell on and broke the lower right leg, requiring hospitalization and surgery.",1
An employee was operating a dough mixer and got an arm caught in the mixer resulting in arm fractures.,1
"An employee was standing by a truck tire that was being inflated when the rim unseated from the tire and struck his left leg, breaking it.",1
"An employee was helping to remove a scrubber from a tank and operating a chain fall attached to the scrubber when the chain fall failed, causing the scrubber to fall on his leg. His lower right leg broke, requiring surgery.",1
"An employee was attempting to straighten a jar on a sealer machine's assembly line. At the same time, another employee pushed on the opposite side of the jar, causing it to cross the machine's eye. The machine then cycled, and the sealer came down on and amputated the first employee's left index fingertip.",0
"An employee tripped and fell while stepping out of a car, breaking his hip.",1
"An employee was standing on a step stool to ensure products were stacked neatly on a shelf when the employee missed the last step on the step stool and fell to the ground, fracturing the right hip.",1
"A temporary employee was sorting through cookies on a conveyor when his middle finger was caught in the conveyor, amputating his fingertip.",0
An employee was walking to his workstation when he was struck by a forklift and fell to the floor. The forklift then started to lower the steel load onto the employee. The driver stopped when he heard screams and saw the employee through the metal coil he was transporting. The employee broke his left femur and right foot.,1
An employee was dumping product into an auger hopper when his right hand entered the spinning auger and was pulled in and amputated.,1
"An employee was standing near a man lift when the lift struck his calf and rolled over his foot, breaking and/or crushing his right foot/ankle and peeling the skin off his calf. He was hospitalized and had surgery.",1
"On 1/11/2018, an employee fell while walking in the cafeteria, breaking her left femur and requiring hospitalization.",1
"An employee was transferring palletized material (shipping boxes, not formed) to other pallets when he tripped on the corner of a pallet and fell, breaking his left femur and requiring hospitalization.",1
An employee was dismantling a mobile crane when the rigging system slid from the load. His left middle finger was then caught and amputated between the two crane sections.,1
"An employee was under a bus performing maintenance when the bus fell on and pinned the employee, breaking bones in the employee's chest and requiring hospitalization.",1
"An employee was exiting his semi-trailer truck when he slipped and fell to the ground, fracturing his leg.",1
An employee was checking the rigging on a rig. His hand was on a sling that was lifting a piece of pipe when his right hand was caught between the sling and the pipe. His right little finger had to be surgically amputated.,1
"An employee jumped onto a palletizer machine and became caught between the machinery, breaking the left tibia and fibula.",1
An employee was lifting packed meats from the floor when he sustained severe back strains. His legs then buckled and he collapsed to the ground.,1
"On 01/11/2018 at 10:40 AM, an employee who was working from a scaffold, fell and sustained a fractured left wrist and right elbow. The employee was hospitalized for surgery.",1
"An employee was working at elevation, installing fitting support brackets on instrument air piping, when he fell 25 to 30 feet to the ground. He was tied off, but his fall protection disengaged about halfway down, allowing him to hit the ground. He suffered a fractured left forearm, multiple fractured ribs, a skull fracture, and a hematoma/brain bleed.",1
"Employee one was electrically testing a 250-amp fuse to verify de-energization with test leads, while a second employee was holding a multi-meter. Employee one tested the probes above the fuse switch on the switch assembly, which was still energized at the time, and an arc blast occurred. Both employees received electric shocks. One employee was hospitalized.",1
"An employee was installing a metal jacket onto a 12"" plumbing line. He was on a slope, lost his footing and rolled his right ankle. This resulted in a dislocated and fractured ankle.",1
"An employee was pointing to the belt and pulley of a bagging machine, explaining adjustments that were made previously in the day, when his right index finger was pulled between the belt and the pulley, amputating his fingertip.",0
"An employee slipped while walking and tore a tendon in the right knee, requiring hospitalization and surgery.",1
An employee became dehydrated and suffered a muscle injury after conducting physical training and was hospitalized.,1
"On January 12, 2018, an employee fell off the top of a tractor trailer, fracturing his wrist and requiring hospitalization.",1
"An employee was driving a forklift in reverse when it abruptly accelerated and he lost control. He struck a guardrail/walkway barrier, pinning and lacerating his lower left leg between the guardrail and the forklift. He was hospitalized.",1
"An employee was retrieving a cell phone from underneath a baggage conveyor belt. Another employee did not know that he was under the conveyor and lowered the conveyor onto him, cracking his rib.",1
"While erecting a scaffold, an employee fell and fractured the left ankle and the right femur, fibula, tibia, and ankle. The employee was hospitalized.",1
"An employee was heating thermoplastic to open a pipe when the hot thermoplastic came through the joints and burned the employee, requiring hospitalization.",1
An employee suffered an allergic reaction to the flu shot and was hospitalized.,1
"An employee was operating a standup forklift when his left hand was crushed between the forklift and a rack, fracturing four metacarpals and his thumb.",1
"An employee slipped and fell on ice in the parking lot, breaking the right ankle.",1
"An employee was walking into an office when his foot became caught on an open closet door, causing him to fall to the ground. He suffered a spiral fracture to his left ankle.",1
"An employee was troubleshooting the natural gas supply for a freshwater heater. The employee opened a valve on a scrubber that released gas and it ignited, burning the employee's legs, hands, and face.",1
"An employee was turning a powered industrial truck (PIT) around near a racking system when she struck a vertical support column, pinning her leg between the PIT and the column.",1
"An employee dropped a tool in concrete formwork and was attempting to retrieve it when the employee became stuck in the formwork, suffering an arm strain and cold weather exposure.",1
"An employee was walking on a roof looking for damages when the employee fell approximately 12 to 18 feet through the roof. The employee hit an open door and then the ground, suffering broken ribs and a punctured lung.",1
An employee was leaving work when she fell and hit her head on the concrete ground. She was hospitalized with a skull fracture.,1
An employee amputated his middle fingertip while cleaning a pump.,0
"An employee was moving a metal skid that was leaned up against a wall. When he moved the skid, two or three skids behind it shifted forward, causing the skid to fall on top of him. He then fell and struck his head on the ground, fracturing his skull and his femur.",1
"An employee fell from an A-frame ladder while stocking shelves or retrieving product, sustaining head, back, and rib injuries.",1
"An employee was being trained to use the band saw. The employee knocked the blade of the saw with the meat, knocking it out of its guide. The employee used the meat hook in his hand to pull the moving blade back into its guide. The moving blade jerked the hook pulling his right index finger into the blade resulting in amputation at the first knuckle.",0
"An employee slipped and fell on spilled coffee in a corridor, fracturing a patella and fibula.",1
An employee's right ring fingertip was caught and amputated between a rolling cylinder and a safety protection gate on a textile machine.,1
"While driving a golf cart, an employee lost steering ability and crashed into a column, suffering an ankle injury.",1
An employee was banding bar stock (three metal pipes) with a pneumatic bander when his right glove and thumb were pulled into a pinch point in the bar stock. His right thumb was partially amputated.,0
An employee was verifying that a tire balancer machine was calibrated when his fingertip was caught and smashed between the machine's contracting panels. His fingertip was amputated.,0
"A temporary employee went on a scissor lift to investigate smoke that was coming from the grinder. As the employee attempted to put out smoking rubber embers a flash fire occurred catching his clothes on fire. He suffered burns to on the hand, lower arms, back and face. The employee also fractured a foot when he jumped from the scissor lift.",1
"An employee was driving a forklift up a loading ramp when the forklift rolled over and landed on his left hand, crushing the metacarpals.",1
"An employee was using a three-step ladder to pull product from the second level rack of an industrial storage rack system when he lost his balance and fell to the concrete floor, breaking his left ankle.",1
"An employee was making adjustments to a plastic mold setter machine when one of the mold halves fell on him, lacerating his hip, chest, neck, back, and left arm.",1
"On January 12, 2018, an employee was cranking the landing gear of a trailer to raise it when the handle of the crank struck him. The employee was hospitalized for an infection.",1
"An employee was attempting to move a heavy, unstable bin by hand when it shifted and fell on his left leg, breaking it.",1
An employee was machining parts on a table saw when the blade amputated two fingers.,1
"A temporary employee was using a plastic part to dislodge cheese pieces from a cheese slicing machine's running conveyor. The plastic part and the employee's left hand were pulled into the conveyor. The machine's blade then amputated her middle finger, lacerated her index finger, and injured her ring fingernail bed. She was hospitalized.",1
"An employee slipped and fell to the ground while walking in the hallway, fracturing his face and shoulder.",1
"An employee stood up from a chair and tripped on a desk, falling forward onto her knees. She then either hit her shoulder or braced herself with her right arm and suffered shoulder pain. She also hit her head on the door. She was hospitalized with a right shoulder fracture.",1
"While walking down the stairs, an employee tripped on the last step and suffered a broken left hip.",1
"An employee was standing on a 12' step ladder about 8' off of the ground while cutting a pipe. As he was cutting the pipe, the pipe came loose from the fasteners that were holding it into the ceiling. It swung down, knocking his ladder over and causing him to land wrong on his right ankle. He was hospitalized with a right ankle injury.",1
"An employee was de-burring a metal plate on a sander when his left thumb was pinched between the metal plate and sanding disc, resulting in an amputation to the tip of his thumb.",1
"On January 11, 2018, at approximately 11:00 a.m., an employee was attempting to drive an ATV up a steep incline when it tipped over backwards. He was hospitalized with a fractured lower vertebra and internal bleeding.",1
"An employee was straightening the strapping around a unit of boxes inside a truck when the strapping broke, causing him to lose his balance and fall backwards out of the truck. He fell on his head, injuring his neck and requiring surgery.",1
"An employee was tripping drill pipe out of a hole at a drilling rig when he tripped and put his hands out to catch himself. While his hands were on the ground, the pipe fell on and cut his right pinky finger. His pinky finger was surgically amputated at the knuckle.",0
"An employee fell off a roof to the ground, suffering a head injury and a broken arm.",1
"On 1/13/18, an employee was trying to move a pallet jack when it rolled over the top of his foot, fracturing it.",1
An employee slipped and fell in the vestibule while walking into an office and fractured the left hip.,1
"An employee was visiting a client's home when the client's dog got up and pushed the employee into a door, causing the employee to fall and suffer hematomas to the back, side, trunk, and torso.",1
"An employee was removing tape from a pipe in a machine when his hand was caught between the pipe and a roller. Skin was removed from his hand, and his thumb broke in two places, requiring hospitalization. The machine was unguarded at the time.",1
An employee was installing a new pipe/liner when he made a cut in the liner and hot water splashed on him. He was hospitalized with second degree burns to the arms and torso.,1
"On 01/13/2018, an employee was scanning a pallet in a warehouse when a powered industrial vehicle (PIV) operator struck him, pinching and amputating his finger between the pallet and the PIV.",0
An employee was walking around the front of a semi truck when his left foot slipped on ice and his right foot stayed planted. He broke his right tibia and fibula and was hospitalized.,1
"An employee fell in the snowy parking lot on the way to her car, breaking several bones.",1
"An employee tripped over debris from pallets on the floor and fell on his hip, requiring surgery.",1
"An employee was working below a load that was being lowered by a forklift when the load fell off the forklift and struck the employee, causing a head injury.",1
An employee was changing out slurry strainers when 180-degree corn mash burned his arms and stomach.,1
"An employee was clearing a hamburger patty jam from equipment when her left hand was caught between the equipment's conveyor belt and its components, fracturing four fingers and requiring hospitalization.",1
"While using a ladder to work on an aircraft, an employee missed a ladder step and fell to the concrete hangar floor, fracturing a vertebra.",1
"While checking a customer's bag, an employee tripped and fell resulting in a fractured arm.",1
"On January 14, 2018, an employee fell on snow and ice while entering the work site, suffering a fractured hip and requiring surgery.",1
An employee was pushing a stack of boxes that became stuck on a conveyor belt when the employee's right ring finger was caught and amputated between the belt and pulley.,0
"On January 14, 2017, an employee was unloading carts of product from a truck when he was unable to stop a cart from rolling down the lift gate and his right calf became pinned between two carts. His right calf was smashed.",1
"An employee was moving from behind a counter when he slipped or tripped and fell into a shelf, breaking both arms and lacerating his lip and cheek.",1
An employee was attempting to lower a dock plate manually when the employee's hand and fingers were caught between the dock plate and trailer floor. The employee's fingers were amputated.,0
"An employee was on a ladder cutting a tree branch with an electric saw when the branch swung and struck the ladder, causing him to fall to the ground and strike his head on the concrete curb. He suffered a head injury, sprained right shoulder, and broken neck vertebrae.",1
"An employee was on a ladder working on a rollup door when he fell to the concrete floor, breaking his right elbow and right hip.",1
"An employee was walking near an exit door when he fell and fractured his right hip, requiring hospitalization.",1
"An employee was attempting to help a rig crew attach an extended boom to a front-end loader. He was trying to push the retaining pin on the front-end loader back in when the operator activated the ram lever, causing the pin to close on his right thumb. His right thumb was amputated at the knuckle and he was hospitalized.",1
"An employee got out of her truck and was walking in front of it when it started to roll. The truck struck and dragged her about 137' before it stopped. She suffered a bruised lung, broken right arm and other bones, and lacerations.",1
An employee was struck in the left leg by a forklift resulting in multiple fractures.,1
An employee was using a sheet machine to cut metal sheets when the machine's hammer smashed and amputated his left ring finger.,0
An employee was conducting well-servicing operations when he injured his back.,1
"An employee was standing on a 6-foot A-frame ladder, putting a liner on a roll-off trailer, when the employee turned and lost footing. The employee then fell approximately 3 feet to the ground, fracturing the left hip.",1
"On January 15, 2018, an employee was trouble shooting a computer control program and while visually inspecting the highly magnetized metal shaft the two magnets came together and amputated the employee's right ring fingertip.",0
An employee was delivering fuel to a store when his pants caught on fire. He sustained burns to both legs and his left hand.,1
An employee was washing a salad mix in a prep sink that was approximately 3/4 full of water when his left index finger was lacerated by a knife that had fallen into the water.,1
"An employee was walking in an open aisleway when he drifted into the main aisleway and was struck by a forklift, fracturing his lower right leg.",1
"An employee fell from a 3-foot step ladder and struck her head, suffering a possible concussion and hospitalization.",1
"On January 15, 2018, an employee was backing a cart load of cinder bricks, weighing about 500 lbs., down a ramp by himself. His finger was caught and crushed between the cart and the frame of the doorway as he was going through, requiring hospitalization and surgery.",1
"On January 15, 2018, an employee was walking through the parking lot when he slipped on ice and fell to the ground, suffering broken ribs and a head hematoma.",1
"While walking to a work bench, an employee felt faint, went to sit down, and tripped over a floor scale. The employee was hospitalized.",1
"An employee was standing on the fifth floor at an open window waiting to receive three reels of aluminum electrical wire and one ground wire reel. The reels were in a makeshift wooden box set atop the forks of a telehandler, which were being raised to the open window by a truck operator. The employee retrieved two electrical reels and the ground wire reel. The last reel of electrical wire remained lopsided within the box. The employee climbed out from the window into the makeshift wooden box (holding the last reel of electrical wire). The box shifted and slipped off the forks. The employee fell with the box approximately five stories to the ground, suffering broken ribs and a back injury. The employee was hospitalized and had surgery.",1
"An employee was walking to his car in the parking lot, slipped on ice underneath the snow and fell breaking the right ankle.",1
"An employee was walking down a platform to a package car when he tripped, fell, and broke his hip.",1
"An employee was leaving the facilities parking garage, placed a coin in the parking gates metal-cased coin slot and received an electrical shock. The employee then exited the vehicle and utilized a key to attempt to open the metal casing to determine the cause of the electrical shock. When the employee placed the key into the metal casing's lock the employee received a more substantial shock.",1
"An employee was using a brush to clean fertilizer off an energized belt conveyor when the brush became caught in the conveyor's rollers. The brush and the employee's left arm were pulled into the rollers, causing a left arm fracture.",1
An employee was driving a forklift onto a truck when the forklift fell off the truck. The employee suffered a broken pelvis and was hospitalized. A seat belt was not worn at the time of the incident.,1
An employee was operating a two-wheeled motorized personal vehicle when he ran over another employee's foot and the vehicle became unbalanced. He fell off the vehicle and fractured his left leg.,1
An employee was moving a large sheeting guide when it cut and fractured the employee's right ring and pinky fingers. The right pinky fingertip had to be surgically amputated.,0
"On January 15, 2018, an employee slipped on ice and fell while walking across the parking lot, breaking an ankle.",1
An employee was removing a battery from a forklift using an overhead hoist when her left middle finger was pinched and partially amputated between the hoist hook and the lifting ear.,1
"An employee was helping to dispose of carts of hangers while another employee was using a forklift. The employee's left hand was then pinched between the forks and the carts full of hangers, sustaining lacerations and two fractured middle fingers.",1
"On 01/15/2018, an employee received a chemical burn to the left arm from hydrofluoric acid.",1
"On January 15, 2018, an employee was using a crane to stand up a steel beam when the beam shifted and struck the employee, bruising multiple muscles.",1
"On January 15, 2018, an employee slipped and fell approximately 10 feet while climbing up a ladder affixed to a welded frame scaffold. The employee suffered possible bruised ribs.",1
An employee was walking when she tripped over a plastic chair and broke her left hip.,1
An employee was operating a forklift to dump a scrap bin when the bin slid off the forks and partially amputated his left pinky finger.,1
"An employee was helping another employee operate a folding brake. She was placing sheet metal in the machine when the equipment came down on her left thumb, amputating the tip.",0
"An employee was performing maintenance on a remote seismic vibrator when his right pinky finger became caught in the locking mechanism, amputating it at the first knuckle.",0
"An employee was raking wood debris from the floor of a step feeder while a second employee was on top of the step feeder using a picaroon to unplug wood from an opening that was full of debris. A piece of wood fell 10 feet through the opening and struck the first employee's left pinky finger, amputating it behind the nail.",0
"An employee fell from a ladder and sustained a vertebral fracture, requiring hospitalization.",1
An employee suffered lacerations to four fingers while using a lathe.,1
"An employee was lining up a 200 pound crank arm for a stretch machine when the crank arm slipped catching the employee's fingers between the crank arm and the machine housing crushing the right index and middle fingers, which were later amputated.",0
"An employee was assisting with the rough cutting (milling) of lumber when the employee's right hand contacted the saw blade, amputating the thumb tip and index finger to the first joint.",1
"An employee was walking on the roof to close the bin hatch after unloading a truck, slipped and fell off the single story roof fracturing the left femur.",1
"An employee was cutting wood stock with a table saw when his glove became caught in the blade, resulting in a partial thumb amputation.",0
An employee was bitten by dog.,1
"An employee was pushing a large lawn mower to hitch it to a tractor. His hand was on the mower's hitch when the mower moved, fracturing and partially amputating his left ring finger and cutting his middle finger. His ring and middle fingernails had to be surgically removed.",0
"While working at the end of a railcar that was going through an intersection, an employee was hit by an oncoming 18-wheeler, suffering a broken ankle, leg injury, broken wrist, and arm injury. The employee was hospitalized.",1
An employee was grinding metal adjacent to a plasma torch cutter. Sparks from the grinder ignited acetylene gas from the plasma cutter. The employee suffered second or third degree burns to his neck and chest.,1
"On January 15, 2018, an employee tripped over an office mat while walking through the office, resulting in a broken hip.",1
An employee was straightening a product on a conveyor belt when her right hand became tangled around a rotating sprocket.  She suffered broken bones requiring hospitalization.,1
"On January 16, 2018, at approximately 5:00 a.m., an employee was operating a crimper machine when his finger contacted a pinch point and was severely cut, requiring hospitalization. The machine was unguarded at the time.",1
"An employee and his driving partner were disconnecting a tanker trailer from their tractor. Due to the weather conditions, the release handles on the fifth wheel coupling had ice build-up on them. The employee was disengaging the fifth wheel with a fifth wheel puller when the puller slipped. This caused the employee to lose his balance, falling backward and striking his head on an adjacent trailer. He suffered a head laceration and was hospitalized.",1
"An employee was loading his delivery truck when a 20- to 25-mile-per-hour wind gust blew the door he was entering shut on his left ring finger, smashing it. His fingertip was amputated.",0
An employee was trying to close a baler door with two other employees. The two employees were pulling down on the door while the injured employee was pushing the paper into the baler. The door then pulled closed and pinched the employee's fingertips. The employee suffered two fingertip amputations.,1
An employee's foot was caught between a forklift and railing.,1
"An employee fell off a concrete form while hooking it to a crane, hitting the ground and injuring the left arm.",1
"An employee was operating and cleaning a molding machine when his right thumb was pinched in the machine, amputating his thumb tip.",1
"An employee was troubleshooting a pump and opened a plug valve.  When the valve opened, pressurized water came out and struck the employee's left hand, puncturing it.",1
An employee was operating a hoist and lowered a roll of carpet onto the left index finger resulting in a fingertip amputation.,0
"On January 16, 2018, an employee was operating a table saw to cut wood when the blade lacerated his right-hand palm, requiring surgery. The saw was unguarded at the time.",1
"An employee was using a material handler to move a piece of MDO panel (2'x10') onto a steel frame when the MDO panel fell off the forks of the material handler and landed on the employees right foot, fracturing the big toe.",1
An employee received a friction blister on his left big toe from wearing new safety toed shoes. The friction blister burst and the toe became infected.,1
"An employee was working on the sanitation crew cleaning the gut table conveyor. As the employee was wiping down the running conveyor, it amputated the left ring fingertip. The conveyor was not guarded at the time.",0
"An employee was photographing underground utility marks while walking on the sidewalk when he slipped and fell on ice, fracturing his right leg.",1
"A piece of wood was jammed in the panel saw. The injured employee was sweeping in the area and went over to assist with the jam. The employee reached into the blade to pull the piece of jammed wood out and cut his finger on the saw blade resulting in a partial amputation of the pinky finger. The e-stop was pushed prior to the employee's hand entering the saw, but the blade was still running from residual force.",0
"While walking down three flights of steps, an employee tripped and fell, suffering broken bones and a concussion.",1
"An employee tripped and contacted a kettle of hot water, receiving burns to the arms, face, and neck.",1
"An employee was operating a machine when a powered industrial vehicle struck the employee with a pallet of rubber. The employee's right lower leg was pinned between the pallet and the machine scale, fracturing it and requiring hospitalization.",1
"An employee was standing on one side of a rotary drilling bit while a forklift was on the opposite side, pushing the center piece out of a rotary drilling bit. The employee was holding a metal square plate to help remove the center piece when the center piece became dislodged from the rotary. The employee's hand was then caught between the metal square plate he was holding and the center piece. He sustained an amputation to his right index and middle fingers and a laceration to his left thumb.",0
"On 1/16/2018, an employee was cleaning the floor when he slipped and fell forward, hitting his jaw.  He became confused and suffered memory loss, requiring hospitalization.",1
"Employees were rigging down a well-servicing rig as an operator station was being lowered with a winch line. The operator station became temporarily hung up on the gears, causing the winch line to develop approximately 4 feet of slack on the line. When the operator station freed itself, it fell approximately 4 feet and struck an employee. The employee suffered fractured vertebrae.",1
"While walking down a residential home's stairs to the basement, an employee slipped and fell, landing on top of a tool bag that contained drill bits. One of the drill bits impaled the employee, causing muscle damage and a punctured lung.",1
An employee was snow blowing a sidewalk when the snow blower chute became jammed. He was attempting to unjam the chute when the snow blower blade amputated two of his fingers.,0
"An employee was walking in a customer's parking lot when he slipped on ice and hit his head on the ground, suffering a head injury and neck sprain. He was hospitalized.",1
"An employee was walking from one vehicle to another when she slipped on ice and fell, fracturing her nose and requiring hospitalization.",1
"An employee slipped and fell on an icy sidewalk, fracturing the right ankle and requiring hospitalization.",1
"An employee was clearing parts from the end of a parts washer conveyor belt when the employee's right ring finger entered the conveyor links. The employee pulled the finger out, and the link lacerated the fingertip. The employee's fingertip was amputated.",0
An employee was walking between buildings when she slipped on ice. She was hospitalized with facial fractures and a concussion.,1
"On 1/17/18, an employee was attempting to fix a jammed sprocket on a cooling conveyor using a metal pry bar. The pry bar became stuck in the chain/sprocket and the employee's left pinky finger was then caught in a pinch point between the pry bar and the conveyor resulting in a fingertip amputation.",1
"On January 17, 2018, four employees were attempting to hand roll a metal combination part that was on the work floor. The part was approximately 184 inches long and approximately 650 pounds. The part was set down and crushed one employee's left-hand middle fingertip, resulting in an amputation.",0
"An employee was attempting to unjam a piece of lumber from an energized chain conveyor when part of his clothing became caught in the conveyor chain. He was pulled into the conveyor until it was stopped by another worker, suffering a right-hand laceration, head laceration, and fractured rib(s).",1
"An employee was inspecting cattle in a pen when the cattle knocked him down, breaking his hip.",1
"On January 17, 2018, an employee exited the front of the store and was walking on the outside designated walkway toward the parking lot when a pickup truck ran over and fractured her feet, knees, and legs.",1
"An employee was walking across the street going toward the main entrance of the plant when he slipped and fell on the icy road, breaking his right ankle.",1
"An employee fell on an icy driveway while leaving a resident's home, fracturing a leg and requiring hospitalization.",1
"An employee was getting out of their car to come into work, slipped on ice in the parking lot and fell breaking the lower leg.",1
"An employee was operating a rough terrain forklift when the lift went across a slope that tilted the mast and forks down, causing the forklift cage to fall from the forks. An employee then fell approximately 12 feet from the cage, suffering fractured ribs.",1
An employee was walking into work after parking his car when he slipped on ice/fresh snow and fell to the pavement. He fractured his hip and was hospitalized.,1
"An employee slipped on ice in the parking lot and fractured an ankle, requiring surgery.",1
An employee lowered himself off a dock and fractured the right leg when he hit the ground.,1
An employee was walking to his car when he slipped on black ice and broke his hip.,1
"While walking out of the parking garage, an employee slipped and fell on an icy concrete walkway and fractured the T-12 vertebra, requiring hospitalization.",1
"An employee slipped and fell on ice, suffering hip and facial fractures.",1
"An employee's cane turned sideways while the employee was walking through the lobby, causing the employee to lose balance and fall to the floor. The employee fractured the left ankle, right knee, and right shoulder.",1
"An employee was operating a drill press when his sleeve became wrapped around the bit, fracturing his arm in two places and requiring surgery.",1
An employee was splashed in the face with caustic material as he was filling a holding tank. He was hospitalized with burns to the face.,1
"An employee was climbing the steps into his dump truck. When he reached the top step, which was frozen and slick, he fell approximately 4 feet to the ground and landed on his left side on a frozen rut. He lost consciousness and sustained several broken ribs, a broken T-10 disc, and a punctured left lung. He was hospitalized.",1
"An employee was putting a large box of foam insulation on the top shelf of a storage rack. He was extended over the top rail of the warehouse platform ladder. As he was pushing on the box, the ladder tipped over, and he fell approximately 4 feet to the shop floor, fracturing two vertebrae.",1
An employee slipped on ice as she was getting out of her vehicle in the parking lot. She fell to the ground and broke her femur.,1
An employee was delivering an order when he slipped on an ice slope and struck the back of his head on the concrete ground.,1
"An employee was cutting knots out of the flooring using a chop saw. When he reached for a board, the saw activated and he suffered a partial amputation to his thumb tip. The saw was guarded at the time.",0
"An employee climbed onto a mower that was raised 18 inches on a final assembly platform to install a steering wheel. As the employee was climbing down from the mower, her foot missed the 18-inch platform and she fell to the concrete plant floor, fracturing her L4 vertebra.",1
"An employee was changing valves on tanks from PVC to stainless steel. The employee was using an air hose to flush a line that was plugged with ice from condensate when the pressurized air hose released and began whipping around. Ice and liquid sprayed out and struck the employee's eyes, requiring hospitalization.",1
"While welding on a beam that was approximately 20 feet high, an employee fell to the ground, fracturing an arm and hip.",1
"An employee was rigging down a workover rig from the operator's platform when the scoping ram hydraulic system failed, allowing the mast to fall to the ground. The employee fell approximately 45 inches off the rig platform to the ground, suffering fractures to the leg and face.",1
"An employee was on the roof of a building installing his anchor point to hook up his personal fall protection when he slipped on an ice patch and fell 21 feet to the ground below. He broke both wrists, both arms, his left leg, and his left hip, requiring hospitalization.",1
"While delivering mail to a residential site, an employee slipped and fell on ice in the driveway, breaking the left hip.",1
"An employee was walking down the stairs when her foot became caught on her pant leg and she fell to the floor, suffering a concussion.",1
An employee was driving a high-reach forklift into a cooler in the outbound warehouse when her foot was pinched between the lift and a beam. Two of her toes had to be surgically amputated.,0
An employee was cutting beef feet for soup bones with a band saw when the employee's finger contacted the blade and was amputated.,0
"An employee walked across the parking lot at a warehouse to speak to a truck driver. He slipped on a patch of ice and fell backwards, striking his head on the concrete.",1
"An employee was pulling a food service cart when her left middle finger was caught between a table and the cart, amputating her fingertip.",0
"An employee was testing a safety valve when the pressure in the steam tank (part of the recovery boiler) caused the safety valve to release a mixture of condensate and steam, spraying hot water through the discharge piping. He suffered second and/or third degree burns to both of his forearms, the left side of his abdomen, and the left side of his hip, requiring hospitalization.",1
"An employee was using a rodder to clear underground communication lines and was placing it into a cradle when it slipped, striking the employee in the face. The employee was hospitalized with facial fractures.",1
An employee was cutting a pork loin with a band saw when the blade amputated his right thumb tip. A push plate was not used at the time of the incident.,1
An employee was using a manual paper cutter when it amputated his left index fingertip. The paper cutter was unguarded at the time.,0
"An employee was helping operate a lap handle machine. The machine jammed; as the employee tried to clear the jam, its cutting blade amputated the tip of her right index finger.",0
"An employee was shoveling saw dust into an auger that leads to a dust collection system when the employee stepped on a grate covering the auger and the grate broke. The employee's right foot was then caught in the auger, crushing and lacerating it. The employee was hospitalized.",1
"An employee was installing a bracket on top of a pier in a basement. As the top of the bracket was adjusted onto the pier, it bent and slipped off the pier, hitting and injuring the employee's chest.",1
"On January 18, 2018, an employee's foot became caught on a dresser edge while vacuuming a resident's room. The employee tripped and fell to the floor, suffering a fractured right hip.",1
"An employee was walking to her car when she slipped and fell on ice in the parking lot. She hit the back of her head on the pavement, suffering head and back injuries.",1
"An employee was putting the cap on a marker when she missed the cap and the marker punctured her left hand. Her hand became inflamed, requiring hospitalization.",1
"An employee was tying cables on top of an industrial dryer that was 15' high when the employee tripped on pipes or wires and fell to the concrete below, suffering brain swelling and broken ribs.",1
An employee suffered a finger laceration while operating a mixer.,1
An employee stepped off a rolling scaffold and slipped. He used the scaffold to hold himself and injured his abdominal muscles.,1
"An employee was bathing a youth patient in a tub when the patient slipped. The employee then suffered a hernia while reaching for the patient, requiring hospitalization.",1
An employee was attempting to help apprehend a shoplifter when his right leg was caught and twisted between two chairs. He fell to the ground and suffered a compound fractured to the right ankle.,1
An employee broke a leg while working as a floor hand on a well servicing rig.,1
An employee got a finger caught between a suspended valve and a bolt. When the employee pulled the finger back quickly the fingertip was amputated.,0
"On January 18, 2018, at 5:40 p.m., an employee was in a boatswain chair greasing blocks when the safety hook came undone, causing the employee to fall 15 to 20 feet to the rig floor. He fractured his right arm and some ribs, requiring hospitalization.",1
"An employee slipped on ice and fell to the ground while stepping out of a van, requiring hospitalization for a possible back injury.",1
"An employee was walking in the parking lot when she stepped into a pothole and twisted her left ankle, breaking it.",1
"An employee slipped and fell on ice while walking to the building from the truck lot, breaking the right leg and requiring hospitalization.",1
The employee lost his balance while dumping the trash and fell hitting his head.,1
"An employee was walking across the parking lot to enter the building when he slipped on a patch of ice and fell to the ground, striking his head and suffering brain bleeding.",1
An employee was reaching for the engine tag on an assembly line pallet when the employee's left index finger was pinched and partially amputated between the pallet and a stopper on the assembly line.,0
"An employee was manually loading pipes onto a low boy when the pipes slipped and pinched one of his left fingers, fracturing and lacerating it.",1
An employee was drilling holes in angles and brushed shavings off the drill bit with his hand at which time his glove was caught in the running drill resulting in amputation of the thumb.,0
"An employee was walking to a vehicle in the parking lot when he slipped on a patch of ice. He hit his head on the vehicle and fell to the ground, landing on his back. His head struck the asphalt, suffering possible neck fractures and requiring hospitalization.",1
An employee was working in a boom lift when a scaffold board fell from the fifth floor and struck the back of his left shoulder.,1
"An employee climbed 20 to 30 feet above ground on a cottonwood tree to cut off the top half as a part of the removal process. After the employee finished cutting the top half with a chain saw, the bottom half of the tree snapped. Because the employee was tied to the bottom half of the tree, both the employee and the tree fell 20 to 30 feet to the ground. The employee landed on river rocks and the bottom half of the tree, suffering aortal bleeding in the chest, several broken ribs, and a broken pelvis, as well as contusions to the head, chest, and pelvis. The employee was hospitalized.",1
An employee was clearing a jam in a packaging machine when the employee's right index finger became caught in the machine. The wrapper blades then amputated the employee's fingertip.,0
"An employee was walking out the back door from the break room when she slipped on icy concrete and fell, hitting her right elbow on the ground. The fall caused a break in her upper arm that required surgery and hospitalization.",1
An employee was sampling grain and fell 15 feet from the top of a rail car. The employee was hospitalized with a dislocated hip and elbow.,1
"An employee was working on a ladder when the ladder slipped out from under him, causing him to fall and break his ankle.",1
"An employee was attempting to change a gear belt on a motor that had seized on a pumping unit when the belt started moving and caught his thumb, lacerating and breaking it. The motor was not locked/tagged out at the time of the incident.",1
"An employee slipped and fell on ice while walking to a building, fracturing an ankle.",1
"On January 18, 2018, at approximately 10:57 a.m., an employee had accessed a stationary gangway to load a railcar with gasoline. While attempting to step 3 to 4 feet over to the railcar, the employee fell 12 feet to the ground, suffering fractured ribs, fractured lower vertebrae, and a partially collapsed lung.",1
"An employee was standing on a flatbed when a forklift truck slid on ice, causing the platform to tilt. The platform then hit and fractured the employee's left leg below the knee.",1
An employee was using a cribbing skid to separate two jacks when the cribbing skid slipped out and struck his chest.,1
"An employee was unloading lumber from a trailer when he lost his balance and fell 4 feet to the ground, breaking his right leg and ankle.",1
"An employee fell while climbing up a ladder onto a front-end loader, tearing his bicep.",1
"An employee was moving a self-propelled wood splitting machine in the storage yard when the vertical splitter lowered on his right hand, crushing and breaking his index finger. His fingertip had to be surgically amputated. The machine was energized at the time.",1
"On January 18, 2018, an employee was delivering a package to a residential home when the employee slipped on ice, fell on a concrete walkway, and fractured the left ankle.",1
"An employee slipped and fell on ice while stepping from a customer's porch, fracturing the left ankle.",1
"An employee had put caustic soda in a container. The lid did not thread properly, and when the employee moved the container, it spilled on his face and arm. He suffered first and second degree burns on his arm and potential eye damage.",1
"While moving a spool of flux to a new work location, an employee fell through a 12-foot by 12-foot temporary floor penetration, breaking both legs, both feet, one forearm, seven ribs, and his skull.",1
"An employee fell approximately 22 feet while conducting roofing activities, suffering a knee injury.",1
"While cleaning a concrete deck with a hand scraper, an employee stepped on a covered opening and fell approximately 10 feet to the ground below, fracturing both wrists and three back vertebrae.",1
An employee was breaking down spools of cable from a cable pole when his left ring finger was caught and crushed between a reel jack and the arbor that was holding the spools.,1
"An employee was carrying a 7-foot pipe when he stepped on a pallet and dropped the pipe, which then struck his leg and fractured his femur.",1
"An employee was installing home wiring from a 6-foot A-frame ladder when he leaned over to get wire from a coworker and lost his balance. He started to fall and grabbed onto a metal roof frame, which cut four of his fingers and caused tendon damage. He then let go and fell approximately 4 feet.",1
"An employee escorted a former employee from the building and into the parking lot after she became loud and verbally abusive. The former employee entered her car and intentionally ran into the employee, knocking her halfway onto the vehicle's hood before striking her again. She fell to the ground, sustaining three fractures to her left ankle and bruising to left side of her body. She was hospitalized.",1
An employee was operating the drill press and became light-headed falling forward into the press and sustaining a right pinky finger amputation and partial right middle finger amputation.,0
"An employee was splitting wood with a log splitter when he noticed a piece of wood was stuck on the blade. As he tried to clear the wood, his hand contacted a moving cylinder, resulting in his left thumb being amputated between the blade and wood stop or moving cylinder.",0
"An employee slipped and fell on an icy sidewalk, suffering a fractured hip.",1
"An employee fell from the top of a truck and landed on the ground, breaking his leg in two places and requiring surgery.",1
"An employee slipped on ice while walking in the parking lot at work, suffering a fractured hip and femur.",1
"An employee was climbing into a truck trailer when his foot slipped and he fell to the ground, fracturing his right femur. He was hospitalized.",1
An employee was completing her patient charting on a computer when someone brought 20 latex balloons into the office for a party. The employee suffered an anaphylactic reaction to the latex.,1
An employee tripped on a low-level guardrail barricade and fell to the same floor level.,1
"An employee was reaching to turn a sulfuric acid tank valve when his elbow hit the sulfuric acid feed line and the line broke, releasing sulfuric acid. He received chemical burns to his face and hands.",1
"An employee was attempting to roll a tarp over product loaded on a trailer, but the tarp was frozen due to ice buildup. He then climbed to the top step of the trailer and began to pull on the stuck tarp string. As he pulled on the tarp, it became free, causing him to lose his balance and fall approximately 7 feet to the ground. He broke his right leg.",1
An employee was attempting to fix a sorting machine's jammed conveyor belt when the belt crushed and amputated the employee's left-hand fingers.,1
"An employee was working on concrete forms approximately 12 to 13 feet from a lower level when she fell to the ground, breaking both ankles.",1
An employee was operating a food blender and amputated her left middle finger to the first knuckle and sustained lacerations to two other fingers on the left hand.,0
An employee was riding on a golf cart to the front door and while exiting the golf cart she fell resulting in a hip fracture and head lacerations.,1
"An employee fell from a bakers scaffold resulting in a broken left leg, muscle damage to the left leg, and a shoulder injury that required surgery.",1
"An employee was tying his lanyard to an anchor point at a roof's ridge vent when he slipped due to frost and fell 15 feet to the ground, breaking his right femur. He was hospitalized.",1
"An employee was operating a pallet jack, rounded a corner, and crashed into a guardrail. The employee's leg was pinned between the pallet jack and the guardrail, suffering trauma.",1
"While raising a garage door, an employee was caught between the garage door frame and a power wash trailer that was being towed out of the building. The employee suffered broken ribs and a possible punctured lung.",1
"On January 19, 2018, an employee was deburring a metal part with an 18-inch disk sander when the sanding wheel grabbed the metal part and then contacted the employee's left thumb. The employee's left thumb tip was amputated.",0
"An employee lost his footing while walking to a podium and fell, suffering multiple fractures.",1
"An employee was attempting to separate a hex socket from the sleeve of an adapter that was used to link a bore machine to an auger. The employee was supporting the hex socket with a finger while tapping the socket with a small hammer to unseat it from the sleeve. The socket gave way, amputating the employee's fingertip with a guillotine action.",0
"An employee was skiing on intermediate terrain with students when he lost control and fell forward on both arms, suffering a bilateral upper arm fracture.",1
An employee was opening the door to a piece of pelletizing equipment when hot water contacted and burned his leg.,1
"An employee was attempting to track a conveyor belt when his jacket was pulled into the conveyor belt, breaking bones in his right arm. He was hospitalized. The conveyor was not locked/tagged out at the time.",1
"An employee was trying to remove bread from an outer slicer blade. She swiped at the debris and her left index finger contacted the outside bread slicer blade, amputating her left index fingertip.",1
"An employee was helping a tug operator line up the tug with a dolly tongue. The employee stepped between the tug and the dolly tongue and her leg was pinned between the two pieces of equipment, injuring her left knee.",1
An employee was retrieving hamburger patties from between moving conveyor belts when the employee's finger entered a pinch point and suffered an amputation. The machine was not shut off at the time.,1
"An employee was working on a tire while a customer was putting air in an air tank. The tank exploded under pressure, causing injuries to both of the employee's legs.",1
"An employee was clearing a jam in a panel/film and tensioner wheel. The employee raided the tensioner wheel set and began pushing the panel/film out of the wheels. The thumb of the his left glove became caught in the tensioner wheel assembly, pulling his hand through the top and bottom wheels. Once his hand travelled through, he was able to free it. His left thumb fractured.",1
An employee was cleaning out tote line equipment for a product change-over when the equipment amputated two of his fingers. The equipment was not locked out at the time.,0
"An employee was operating a forklift and when he tried to stop the forklift it slid on the frozen floor. As the forklift was sliding, the employee dismounted the lift and sustained a laceration and fracture of the left arm.",1
"On January 20, 2018, an employee was walking from the parking lot toward the main entrance when she slipped and fell, hitting her head on concrete.",1
"An employee was walking behind the checkout counter when she tripped on a box and fell onto shelving, fracturing her left hip.",1
An employee suffered a partial amputation of the right index finger.,1
"An employee was pulling wire from a bobbin to correct a tangle in the wire. As the employee started the spooler to reload the wire onto the bobbin, the wire caught the employee's foot. The employee was hospitalized with an ankle fracture.",1
An employee had helped to load a backhoe onto a trailer and was walking toward the front of the trailer to get down. The employee was walking under the outrigger of the backhoe when the chain snapped and knocked the employee off of the trailer onto the ground. The employee suffered a ruptured spleen and internal bleeding.,1
"An employee slipped and fell while walking down an incline that was covered in snow/ice, breaking a bone under the right kneecap.",1
An employee inside the stock room was walking around the product cart (U-Boat) and tripped over a pallet. The employee fell to the ground and fractured the right hip.,1
"An employee was setting up a booth at a merchandise show when two furniture fixtures fell, pushing the employee to the floor and landing partially on top of him. He suffered an ear laceration and fractured tailbone.",1
"On January 21, 2018, an employee was rigging down rig stairs to be picked up by a mobile equipment telehandler. While the telehandler was scoping out to pick up the rig stairs by the handrails, the forks bounced and struck the employee on his left shoulder. He suffered pain and numbness on the right side of his body, as well as inflamed bulging discs.",1
"An employee was watering a lift battery (approximately 350 lbs.). The battery did not have the retainer in place at the time. As he was pulling on the lid of the battery, it rolled out of the compartment and fell over. He tried to catch it and it fell on his right hand, smashing fingers two - five. Sulfuric acid also leaked from the battery onto his hand. His right long finger had to be amputated at the second knuckle.",0
"A security guard was trying to bring an unruly customer out of a restaurant when the customer hit the security guard with a glass, causing a facial laceration that required surgery.",1
"A parking lot security officer was attempting to stop an alleged shoplifter while he stole her vehicle and started to drive away. She was dragged by the vehicle some distance while hitting barriers, suffering bruised ribs and a head laceration. She was hospitalized.",1
"An employee fell approximately 10 feet from the shop roof to the ground, suffering cracked ribs and a broken shoulder. He was hospitalized.",1
"While working in the scrapping/milking area, an employee mistook formaldehyde for water and ingested approximately 4 to 5 ounces of 37% formaldehyde, requiring hospitalization.",1
An employee suffered an allergic reaction to peanuts while working at the hospital.,1
"An employee was driving a street sweeper down a well pad access road when he applied the brakes, slid into a ditch, hit a mound, went airborne, and rolled two times. He suffered fractured ribs, a collapsed lung, and a fractured pelvis.",1
"An employee was loading bags onto an aircraft. He tried to stop the door to the aircraft from closing and missed. The door then closed onto his left index fingertip, severing it.",1
"An employee was stepping from an office area into a production area and slipped. One of the employee's legs went forward, while one stayed put, hyperextending the legs (no fall). The employee suffered a torn leg ligament and was hospitalized.",1
An employee fell down a flight of stairs and suffered a dislocated hip.,1
"An employee was loading a conveyor belt from the front side of a skid. While he was bending down to reach for another product, a box fell on top of him, striking the back of his neck and upper back between the shoulder blades.",1
An employee was installing a tin shield over insulated wires that were exposed to hot metal when the shield touched a bare conductor and an arc flash occurred. The employee suffered an arc flash burn and possible concussion.,1
An employee was directing other employees who were installing a cured in-place pipe when hot water splashed from the installation equipment and contacted the employee. He suffered first to second degree burns on his upper body and fractured several fingers when he fell on the ground. He was hospitalized.,1
"An employee was climbing down the side steps of a tractor trailer when the employee missed a step and fell to the concrete, sustaining a hematoma of the brain.",1
"An employee was framing the edge of a roof dormer when he leaned against an unsecured rafter and fell approximately 20 feet from the roof edge, breaking his back and knee and suffering lacerations. He was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee was acting as a spotter as another employee was operating a portable crane to remove a bag house filter. His hand was holding the top part of the hoist's load cable when it reeled in his left index finger, pinching it and resulting in a surgical amputation.",0
An employee was inspecting a vehicle's wheel and tire while the vehicle was on a lift when the employee's hand was caught between the vehicle's brake caliper and wheel spokes. The employee's right middle and ring fingers were amputated.,1
"An employee slipped and fell on ice when she went to retrieve something from her car, suffering a broken leg.",1
"While walking across a snow-covered parking lot, an employee slipped on a patch of ice and impacted the frozen ground, suffering a subcutaneous bleed and head trauma.",1
An employee had an asthma attack after being exposed to floor stripper.,1
"An employee was using a wrench to adjust equipment when it jerked the wrench, causing his right ring finger to get caught between the wrench and the equipment. His finger broke and his fingertip was amputated. The equipment was running at the time of the incident.",0
"An employee had just arrived at the home of a patient and walked in with wet shoes from the snow outside. She slipped on the wet floor and landed on her knee, breaking her kneecap.",1
"An employee was reversing a standup forklift when extension forks that were stored on a pallet behind him protruded into the cab, pinning, dislocating, and breaking his left ankle.",1
"An employee was attempting to remove a stub of core at a core cutter when his hand went between the ejector and roller, and his middle finger became caught. His fingertip was pulled off between the equipment.",0
Employees were emptying and transferring residual powdered plastic from a hopper to a supper-sack in preparation to tag out the equipment for cleaning. One of the employees reached into the bottom of the hopper and made contact with the rotary valve. The valve was in operation and amputated the employee's right index and middle fingertips.,0
"An employee was in a lift changing light fixtures on a pole in front of a house when he contacted a powerline and was shocked, suffering third degree burns.",1
An employee was using a pick-axe to unjam lumber (approximately 192 lbs.) from a machine when the lumber slipped and pinned his left pinky finger between the edge of the board and another board. His finger was pinched off below the fingernail.,0
"An employee slipped on concrete in a wash basin and attempted to prevent his fall by grabbing onto a section of portable scaffolding. The scaffolding fell on top of him and he struck the concrete, suffering a head injury, concussion, and brain bleed.",1
An employee was unloading materials from a truck trailer when an all-terrain forklift dumped timber onto the employee. The employee suffered a broken pelvis and ankle.,1
"An employee slipped outside while walking to his car and hit his head, suffering a contusion.",1
"An employee was using a power drill to clean the barrel of an extrusion line when the employee's glove became entangled in the drill. As a result, the employee's left pinky finger was amputated.",1
"An employee slipped on ice and fell to the ground, breaking her right ankle.",1
An employee was stocking the upper shelves in a store while riding in an order selector/platform lift. The employee fell from the lift and suffered a concussion.,1
"An employee slipped and fell on ice on a customer's driveway, suffering a leg injury.",1
"An employee fell to the floor while walking out of a bakery freezer, suffering a right ankle injury.",1
One employee was in the back of a box truck while a second employee was standing outside when an air compressor exploded in the box truck's engine compartment. One of the employees was hospitalized with burns.,1
"An employee was standing on top of a greenhouse pulling plastic off the frame when he lost his balance and fell approximately 14 feet, injuring his shoulder.",1
"Two employees were driving pallet jacks and crossing the same intersection. One of the employees swerved to avoid hitting the other employee and hit an impact-protective pole, breaking his right foot.",1
"An employee was putting tape on the back of paper at a paper cutter machine when his fingers became caught in the machine's rollers. He then fell on his right side and struck the steel frame of the machine, breaking five ribs and his collarbone.",1
"An employee tripped and fell when walking over a transition between two different types of flooring, breaking her pelvis and requiring hospitalization.",1
An employee was loading an ATV sub component into a weld cell when his glove and right middle finger were caught between a clamping mechanism. His right middle fingertip was amputated.,1
"An employee was working at a height of about 15 feet to remove gang forms and strip out a bulk head with another employee working on the opposite side of him. The employee was wearing a positioning belt and was tied off to an anchor point affixed to a rebar. As he was working, the positioning belt's hook slipped off the tie-off point and he fell, striking a protruding rebar at a lower level and puncturing his right thigh.",1
An employee slipped and fell to the floor while working from a scaffold resulting in a fractured right wrist.,1
"An employee was walking near a conveyor when he slipped on fat on the floor and attempted to break his fall by grabbing the conveyor. His arm was pulled into the conveyor, fracturing his right radius.",1
"An employee was sitting on the tailgate of a moving pickup truck when the employee fell to the dirt ground, suffering a fractured left hip.",1
"An employee was grabbing a transfer cup to place it on top of a rod when his thumb became caught in the transfer cup's hole, amputating it.",1
An employee was driving a yard hostler when he crashed into a terminal light post with a concrete base. He fractured his leg and was hospitalized.,1
An employee strained his back while lifting a truck tire.,1
An employee was leaving for the day and walking toward the employee exit. She walked through the kitchen and was turning the corner when she fell through an open hatch to a crawl space under the kitchen that was going to be sprayed for bugs. She broke three ribs and bruised her shoulder.,1
An employee was in a manhole getting ready to test a pressurized sewer line when the line plug struck the employee's head.,1
"An employee was unloading an I-beam from a flatbed truck and then hooked the I-beam's chains onto an all-terrain forklift's low back rest. He signaled the forklift driver to raise the I-beam. As the I-beam was being raised, the chain broke, causing one side of the I-beam to hit and break his left tibia. He was hospitalized.",1
"An employee was moving scrap steel when it broke and fell on his feet, fracturing both of them.",1
"Two employees were removing a bundle of glass by hand from a ground-level storage rack when the bundle fell, striking one of the employees in the back of the right leg. His right tibia broke, requiring hospitalization.",1
"An employee was installing new wiring for a sign when he received an electrical shock and fell off his ladder. He landed on his ankle, fracturing it and requiring hospitalization.",1
"An employee was cleaning a filling machine when he observed defective caps locked in the supply channels to the capper. He put the capper in manual mode and manually moved the joint with his left hand as he tried to remove the crowns with his right hand. During this operation, one of his fingers entered the moving machine, severing his fingertip.",1
An employee was walking backwards while operating an overhead crane when the employee tripped and fell over a pallet. The employee's right elbow struck the frame of the crane and suffered a fracture.,1
"An employee was moving a pallet from a truck when the truck pulled away from the dock. She then jumped from the jack plate on the dock to the back of the truck and fell to the ground, suffering a skull fracture and slight concussion. She was hospitalized.",1
"An employee was monitoring a molasses auger when the employee's right hand contacted the auger, suffering a partial de-gloving.",1
"On January 23, 2018, at 4 p.m., an employee was switching railcars and walking beside a train when he tripped and fell. His right arm was then amputated by the train wheel.",0
"An employee was standing on a 4-foot scaffold when the employee stepped off the edge and fell to the ground. The employee's head struck the ground, suffering a temporal fracture.",1
"On January 23, 2018, at 4:10 p.m., an employee was placing a brass valve into a water test tank on a fixture system when he inadvertently hit the back lever, causing the clamp that holds the valve in place to clamp on his left middle finger, amputating it.",0
"An employee was leaving work when she approached the entrance to the building and slipped and fell on the floor, which was being mopped. She suffered a possible hip fracture.",1
"An employee was working near a shoulder spreader when it was loaded onto his foot, breaking it and requiring hospitalization.",1
"An employee was operating a tugger when he went around a corner and fell off the tugger, landing on and fracturing his hip. He was hospitalized.",1
"An employee was using an overhead crane to remove product from a line when his left ring finger was caught between the crane hook and the product carrier, resulting in a partial amputation.",0
"An employee was attempting to stop a fire in a lint cleaner when his left hand became caught in the machine, amputating four fingers.",1
"An employee used a forklift to pick up a trowel and clean the pans that were underneath it. The trowel was still running when one of the pans ejected, striking and breaking an employee's left shin.",1
"A truck trailer was parked at the dock. An employee was stepping backwards in the trailer when her foot became caught on a pallet or piece of freight. She fell backwards and broke her ankle, requiring hospitalization and surgery.",1
"An employee's foot became caught on a desk and she fell between the desk and a copier machine, breaking her right hip.",1
"An employee was transferring boxes of product from one pallet to another when she lost her balance and fell to the ground, breaking her right ankle.",1
"An employee was walking in the dry dock area when she caught her left foot on a trash bin, tripped and fell. She fractured her elbow and required hospitalization and surgery.",1
"While moving a circuit breaker cabinet, an employee contacted live electrical parts, suffering hand burns and a wrist laceration. The employee was hospitalized.",1
"An employee was riding the elevator down from the 5th floor. It stopped between the 1st and 2nd floors and would not move. He tried to get the elevator to move, worked his way out of the opening, and fell about 6 feet to the pavement below. He broke several ribs.",1
"An employee was screwing a mechanical bar into rebar in concrete but was having trouble threading the bars. He used a drill to try to get the bar to go in, and caught the glove of another employee in the drill. This caused the injured employee's  left hand to spin around breaking his left pinky and index fingers and dislocating his ring and middle fingers.",1
"An employee was on a ladder bolting a beam onto a wood column when the beam fell off the column. The employee tried to grab the falling beam and fell off the ladder to the ground, breaking his right arm.",1
"An employee was grabbing an end piece from the billet box on a shear cutter when the shear cut another piece (an approximately 70-pound billet), which rolled and struck his left hand. His index and ring fingers broke, and the three middle fingers required stitches on the palm side. He was hospitalized and had surgery.",1
"An employee was opening boxes of meat and then breaking the cardboard down for recycling when her right pinky finger contacted the blade of a bandsaw someone else was using and was lacerated, requiring medical amputation.",0
"An employee was going to perform routine maintenance (cleaning) on the plasma cutter table. The employee lifted the top part off the plasma cutter table with an overhead crane. The interior slag tray slipped out of the rigging and fell onto the employee, who suffered a broken hip and was hospitalized.",1
"While cutting a cedar tree, an employee fell from a height of about 12 feet and struck the ground, suffering a broken collarbone.",1
"After installing ductwork, an employee was descending a ladder when he fell approximately 8 to 10 feet, suffering multiple fractures.",1
"An employee was cleaning the site and putting debris in a skid steer bucket. He was dislodging a piece of wood that was caught between the mechanical arm of a skid steer when he inadvertently pressed the skid steer's foot control. His right leg was then caught between the arm and the bucket, breaking his tibia.",1
"An employee was attempting to get an infeed belt to a chipper running again. He applied pressure to the belt with his foot so the belt would gain traction. At the same time, another employee was toggling the forward and reverse switch for the belt. The first employee's right foot then became caught between the conveyor belt and the end roll of the conveyor, breaking bones in the right foot and leg area. He was hospitalized.",1
"An employee was crossing the street when an unsecured load of pipe fell off a flatbed truck and struck him, fracturing his leg.",1
"An employee was moving a refrigerator with a hand dolly. While lifting, the employee's hip joint displaced out of its socket.",1
"An employee was troubleshooting live circuit breakers that were tripping at a meter box when an arc flash occurred. He was engulfed in flames, receiving severe burns to his face and hands.",1
"An employee was performing maintenance underneath a railcar mover unit when a stand failed, causing the employee to be pinned by the unit. The employee suffered internal injuries, broken ribs, and a broken collarbone, requiring hospitalization.",1
An employee was pulling wire and received third degree burns from an electrical shock at a splice box.,1
"An employee was adjusting the pressure spring on a label machine when it came down and struck the employee's right middle finger, resulting in a fingertip amputation.",0
An employee was loading a roll of paper into a machine and the employee's finger was crushed between the mast of a mobile hand truck and a plastic chuck on the machine resulting in a fingertip amputation.,1
"An employee slipped and fell, requiring hospitalization.",1
"An employee was struck by a falling tree, suffering pain in his left lower back and left arm, numbness in his right foot, and burns.",1
An employee was walking down the stairs of a platform when she missed a step and broke her lower left leg.,1
"On January 24, 2018, an employee was attempting to remove a part from a packaging robot when the employee's finger was caught in the spin line's point of operation, amputating the fingertip.",0
"An employee was picking up trash on an interstate off-ramp when a car hit the employee, who suffered a broken right tibia. The employee was wearing PPE at the time.",1
"While exiting a roof via an extension ladder, an employee fell off and suffered head trauma.",1
"An employee was crossing the street in the crosswalk to another office building when he was struck by a car, suffering a head injury, fractured ribs, and lacerations.",1
An employee was getting into a burden carrier which is similar to a golf cart when their knee gave out.,1
"While descending a ladder, an employee missed a step and fell to the ground, suffering back contusions.",1
"An employee slipped and fell on ice after leaving her vehicle to begin work at the store, fracturing her ankle.",1
"An employee was cleaning a coffee pot with bleach when he inhaled chemical vapors. He began coughing and his throat was burning, requiring hospitalization.",1
"An employee was using a come-along to realign a chain on a sprocket when the employee's left thumb was caught between the chain and sprocket, lacerating and breaking it. The employee was hospitalized and had surgery.",1
"An employee was walking to the facility from the company parking lot when she slipped on ice and injured her back, requiring hospitalization.",1
"An employee was trying to unjam a pipe that was stalled in a hydro tester. The employee was able to clear the stall, at which point the hydro tester allowed another pipe to enter it. The employee's right thumb was then caught between the two pipes, amputating it at the middle joint.",0
"An employee was on a ladder pumping a residential column full of concrete. He was leaning on the column when it collapsed, causing him to fall to the ground. He injured his hip and was hospitalized.",1
"An employee was collecting garbage and crossing the street to retrieve another garbage container when a vehicle hit him, fracturing his right tibia. He was hospitalized.",1
"An employee changed out two full bobbins of yarn on a spooling machine, reloaded the machine with two new empty bobbins, wrapped the fiberglass yarn around the two bobbins, and pressed the start button with the left hand while the right hand was on one of the bobbins. The employee's right middle and ring fingers were then caught and pulled into the bobbin, and the yarn abraded/cut the inside of these two fingers.",1
"On January 24, 2018, an employee was exiting his car in the parking lot when he slipped and fell on ice, bumping his head. He suffered a brain hemorrhage and was hospitalized.",1
"On January 24, 2018, at approximately 7:45 a.m., an employee slipped on ice after exiting her car on the top floor of the parking garage and fell, striking the back of her head on the ground. She suffered a concussion, requiring hospitalization.",1
"While walking in a hallway, an employee turned around, lost balance, fell to the floor, and sustained a head concussion.",1
"An employee was stepping off a pallet jack when it rolled and pinned him against a rack, fracturing his right leg in two places.",1
"An employee was walking back to his patrol vehicle when he slipped and fell on a patch of black ice, suffering back and neck injuries, a concussion, and broken ribs.",1
An employee suffered a finger amputation while lifting a fire hydrant.,1
"An employee was unloading a truck using an auger machine when the machine became jammed. As he attempted to clear the jam by pulling on the belt, the belt started up again. His thumb was then pinched between the belt and pulley, amputating the tip. The machine was energized and the belt and pulley were unguarded at the time of the incident.",0
An employee's face was struck by a falling piece of wooden billboard during vinyl installation. The employee suffered a face contusion and sore back.,1
"An employee was using a miter saw when it became jammed with material. As he attempted to unjam the saw, his fingers were caught by the blades, amputating his right ring fingertip.",0
"An employee was changing a preheater feed screw. He was using a 4-foot-long piece of pipe to bump the blow-back cylinder and make it retract so that the feed screw could be removed. The cylinder then moved forward instead of retracting, which forced the pipe back. The pipe pinned the employee's hand between the end of the pipe and a very heavy flange that was part of the machine frame. The employee's right index finger was amputated.",1
"An employee was checking pressure in the fuel injector pump of a truck when his left hand slipped into the moving truck engine fan, lacerating it between the thumb and forefinger. He was hospitalized and had surgery.",1
An employee was loading a truck with material when a metal banding brace that was holding the material broke and lacerated his finger.,1
"While working in the laboratory, an employee fell. The employee's head hit a countertop or the floor, suffering a concussion and hematoma.",1
"An employee was attempting to pull a dolly loaded with boxes when his foot slipped. The dolly then fell backward onto the employee, fracturing his right hip.",1
An employee and his crew were connecting a float hose and a head section (floating pipeline for hydraulic dredge). He was tying a 2-inch polypropylene line from the dredge tender to the pontoon tank when his left ring and pinky fingers were caught and amputated between the line and the bit.,0
"On 1/24/2018, an employee suffered a fingertip amputation while repairing a truck's lift gate.",0
"An employee was stacking boxes of cantaloupes from a conveyor line onto pallets located behind him. He grabbed a box from the bottom, and his pinky finger was caught and lacerated under the belt.",1
An employee slipped and fell resulting in a head injury.,1
"An employee was performing maintenance on an exhaust fan motor for a salon. The employee performed lockout/tagout on the unit but the fan continued to rotate because of the positive pressure in the building. The employee was attempting to slow the rotation of the fan by slowing the drive belt when the employee's right hand was pulled into the drive pulley, amputating the right middle fingertip.",0
An employee was on an extension ladder cleaning snow off the top of a semi-trailer when the ladder slipped from under him. He fell about 13 feet to the ground and broke his pelvis.,1
An employee opened the door to a battery condenser and was attempting to push cotton through it when his left arm became caught and crushed in the feed works. The machine was operating at the time of the incident.,1
An employee was helping to install an engine and screwing in a bolt when the engine slipped off its rigging and smashed his right index finger.,1
"On January 25, 2018, at approximately 2:30 p.m., an employee was removing unused conduit when he stepped to his left and tripped over a 12-inch-high spill containment wall, falling to the ground and fracturing his tibia and fibula.",1
"An employee was using a drill to install sheet metal beauty rings around ductwork when the employee's hand slipped and hit the metal duct, lacerating the right index finger.",1
"An employee was snowboarding down a mountain after giving a ski lesson when the employee collided with another snowboarder, suffering a concussion.",1
"An employee was reaching to pull paper off a spindle when she was pulled into the equipment. She suffered a compound fracture to her right arm, requiring hospitalization.",1
"An employee was operating a forklift to bring material to a shrink wrap table. He got off the forklift and was taking the load off the skid when he bumped a spool piece, which then fell on his right foot, resulting in an amputation to the right big toe.",0
"An employee was moving a steel plate with a magnet when the plate slipped off the magnet and landed on his right foot's big toe and second toe, amputating the phalanges. Straps were not used at the time of the incident.",0
"On 1/25/2018, an employee was finishing drywall when he fell off a scaffold and broke his arm, requiring hospitalization and surgery.",1
"An employee stepped on a two-step stool and was putting away plastic containers when she lost her balance and fell backwards, fracturing her right leg.",1
"An employee was training a new employee on how to operate a tug/dolly. She was trying to unhitch the dolly when the tug pulled it forward, striking her. She suffered a leg fracture and was hospitalized.",1
"An employee dismounted a forklift to dump a hopper of scrap wood into a grinder stockpile area. He braced his left palm on the outside of the forks, which placed his left pinky in the path of the hopper channels where the forks were pre-positioned. When he moved the level to dump the hopper, the weight caused the hopper edge to drop and crush his left pinky fingertip, which had to be surgically amputated.",0
"On 1/25/2018, at approximately 6:45 AM, an employee's right thumb rolled underneath a conveyor belt and was caught, amputating the tip. The employee was hospitalized.",1
"An employee was cleaning a dicer machine used to cut cheese curds when he contacted the star blade, resulting in an amputation of his right index fingertip and the top of his right middle finger. The machine was not completely shut down at the time of the incident.",0
"An employee was cutting a piece of wood plank that was bolted to a trailer with a circular saw when the saw kicked back, amputating half of the employee's right index finger.",0
"On January 25, 2018, an employee was steering a scrap tractor that was brought in on a trailer while another employee was pulling the tractor with an excavator. The tractor rolled backwards, pinning the employee between the excavator bucket and the tractor steering wheel. The employee suffered torso contusions and was hospitalized.",1
"An employee was marking a concrete structure that was frozen to the ground when an excavator operator went to push the structure with the excavator bucket. The operator did not see the employee and moved the structure, which then struck the employee. The employee suffered a dislocated hip and fractures.",1
"An employee was using a hydraulic torque wrench to tighten bolts on a flange. The employee's left hand was near the head where the hydraulic hose connects to the wrench. The hose became punctured and injected the employee's left-hand palm with hydraulic fluid, lacerating it.",1
"An employee was re-mounting a conveyor rear lift cylinder when the conveyor became over centered and pinned him between the cylinder and rear mount, breaking and lacerating his right arm.",1
"An employee was preparing to install a conduit on an outside wall. He was climbing an 8-foot A-frame ladder that was leaning against the wall when he lost his footing and fell about 6 feet, striking a table positioned next to the ladder. He broke his arm, requiring hospitalization and surgery.",1
An employee was attempting to adjust the core in a winder when his finger became caught between the core and the spindle arm. His right index fingertip was amputated.,0
"An employee was operating a marking machine when his glove became caught and pulled his left hand into the machine, crushing his index and middle fingers.",1
"Two employees were aligning a head pulley with a tail pulley on a vertical leg/bucket conveyor. The injured employee was measuring the distance from the tail pulley to the plumbing string at the lower level when he was struck by a 2x2x6 angle iron weighing approximately 14.64 lbs. that came loose while the coworker, 130 feet above, was repositioning it. The angle iron fractured and severely lacerated his lower right leg, requiring hospitalization and surgery.",1
"An employee was cleaning when he bumped into a vertical pipe containing hydrofluoric acid. The acid dripped down under his gloves, burning the top of his left wrist. The pipe had been flushed at the time of the incident, but a section had a few ounces of trapped acid. The employee was hospitalized.",1
An employee was attempting to pull out a blank from a machine when his right middle finger became caught between the feed rollers. His right middle fingertip was amputated.,0
"An employee was performing a hydro test on a 16"" pipe when the pipe's underground connection failed. The pipe then shifted and fell onto the employee's left foot, fracturing and lacerating it.",1
"An employee was pushing a cart when he hurt his hand, became lightheaded, and fell, striking his head on the floor. He fractured his skull and was hospitalized.",1
"An employee slipped and fell while walking down the stairs, breaking her arm.",1
"An employee was standing close to an excavator when the equipment hit a pipe, which then moved toward him. His boot was caught on something, so he was unable to move before the pipe struck his left leg, fracturing his tibia and fibula.",1
"An employee tripped and fell on uneven pavement while walking to a patient's home, suffering a fractured hip and requiring hospitalization.",1
"An employee accessed a truck's roll-off container and fell to the ground, fracturing his left leg and requiring hospitalization.",1
"An employee was working on a bundler when the bundle ram came down on his left hand, smashing his left ring finger between the bundle board. When he pulled his hand out, his left ring fingertip was ripped off.",0
An employee was working in a warehouse when a forklift rolled onto the employee's foot.,1
"An employee had been standing on an 8-foot step ladder to examine roof work. As she was climbing down, she slipped and fell off the ladder, requiring hospitalization.",1
"Two employees were carrying a glass shower door that had been returned to the store. One employee dropped his end of the door, causing the glass door to shatter. The shattered glass then lacerated his left wrist.",1
"A employee was inspecting a motor home when a line underneath the motor home was severed, resulting in the amputation of his fingertip.",1
An employee was testing equipment when a valve ruptured. The employee was then struck by the valve or water pressure resulting in a leg laceration.,1
"A temporary employee was driving a forklift to the battery charging area when he struck the bollard around a pole. The employee was not wearing a seat belt and struck the safety cage. When he tried to get off the lift, he passed out, fell, and hit his head on the concrete floor. He was hospitalized and had surgery for a broken neck.",1
"An employee tripped over a box on the floor and fell, fracturing the pelvis.",1
"An employee slipped and fell to the ground outside of the store, breaking his arm and requiring hospitalization.",1
An employee was repairing a door latch on an industrial washing machine when the washer activated and closed on the employee's left hand and forehead. The employee suffered four broken fingers and a forehead laceration.,1
An employee was pushing a cart that had fiberglass rolls on it when she slipped and hit her head on the cart. She required stitches and was hospitalized.,1
"An employee tripped over a door stop while entering the office and fell to the ground, breaking a femur.",1
Two employees were involved in a physical altercation. One employee was shoved and fell to the ground breaking a leg.,1
"On January 26, 2018, an employee was exiting a truck when he slipped and fell, breaking his femur and elbow.",1
"An employee was walking from the company parking lot when he slipped on mud, fell, and broke his right ankle.",1
"An employee was working at a register when she tripped over a cord and fell to her right side, striking the floor and fracturing her right hip. She was hospitalized and had surgery.",1
"An employee was adjusting a ""T"" attachment on a loader to carry a bundle of guide rods. The driver of the loader exited it and bumped the steering wheel, causing the ""T"" attachment to shift. The employee's hand was then caught between the guide rod bundle and the ""T"" attachment, partially amputating his right ring finger.",0
"An employee was pulling a shopping cart with garbage down a set of three steps when the load in the cart shifted, causing her to fall and injure her right hip. She was hospitalized and had surgery.",1
"An employee was greasing the bearing on a sheet stacker machine when the machine's chain pulled his gloved right hand into the moving sprocket, amputating his right index and middle fingers to the second knuckle and partially amputating his thumb. The machine was running at the time of the incident.",1
"An employee was building PIT mast cylinders when his leg was caught between cylinder machinery and a moving part, suffering a contusion that required hospitalization.",1
"An employee was removing steel guide plates when a guide plate fell on his left hand, crushing his third and fourth fingers and resulting in one surgical fingertip amputation.",0
An employee was about to open a box on the back of his truck when a retaining arm that holds up the tail gate came loose and struck the employee's face resulting in a laceration.,1
"An employee was working on a scaffold when he fell to the ground below, shattering his leg and breaking his wrist.",1
"An employee was working out of a bucket truck to cut off the top of a pine tree when the tree top fell and hit the boom of the bucket truck. The employee was ejected 40 feet out of the truck to the surface below, suffering facial and back fractures.",1
"An employee was operating a reach truck. As he backed up, a piece of pallet was sticking up and it cut into his left thigh and came out the other end.",1
"While cleaning a grill hood, an employee fell into a fryer with hot oil, requiring hospitalization for third degree burns.",1
An employee was repositioning a resident onto a patient lift pad with another employee when she experienced back pain and could not move. She was hospitalized.,1
"While walking to the break room, an employee tripped over a concrete step-up and fell to the same level, fracturing the right patella.",1
"An employee was climbing an 8-foot fixed ladder. When he reached the platform at the top, he let go of the railing on the ladder and grabbed the inward swinging safety gate. When he removed his first hand to grab the gate, his second hand slipped off the railing. He fell to the floor below, striking his elbow on the floor. He suffered a fractured humerus and elbow tip as well as an open wound contusion.",1
"An employee was working from an 8-foot step ladder to change a lightbulb when a gust of wind blew the lens off. The employee fell to the ground while attempting to catch the lens, injuring both ankles and requiring hospitalization.",1
"An employee was resetting paper when the employee's right hand went between two moving gravity fed rollers, suffering a right forearm contusion.",1
"An employee was working at the customer service counter when her foot became entangled in an electrical cord that was sticking out from the bottom shelf. She tripped and fell to the same level, breaking her right hip.",1
"An employee was attempting to stop shoplifters when he was pushed down, injuring his back and hip (possible broken hip). He was hospitalized.",1
"An employee was holding a valve open by hand when a pig within the pipe struck the valve, causing the lever to strike the employee, who then fell to the ground. The employee suffered broken ribs and a bruised lung, requiring hospitalization.",1
"An employee fell approximately 8 feet while descending a scaffold ladder, fracturing the right elbow and L3 vertebra.",1
"An employee was climbing a two-step ladder, mis-stepped, lost her balance, and fell to the concrete floor resulting in a fractured and dislocated right wrist.",1
"An employee was cleaning a piston-type vacuum pump attached to an extruder machine when his left glove was caught in the cylinder by the internal machine parts, resulting in an amputation to his left index fingertip.",0
"An employee tripped and fell to the ground while descending a ladder, fracturing the left hip.",1
"An employee had been in a derrick helping a snubbing unit crew change out a stiff arm. He was coming down from the derrick when the snubbing unit dropped the short stiff arm, which then caught his left index finger against the handrail. He suffered an open compound fracture to his finger.",1
An employee's lower shirt sleeve ignited while he was lighting a cigarette in the designated smoking area. He suffered second degree burns to his lower arm.,1
"An employee was walking out of a freezer and removing coveralls when the employee became tangled up in them. The employee then fell onto a pallet and the floor, dislocating the left shoulder.",1
"An employee was removing hanging pipes from a conveyor when her finger became caught in a nip point on the conveyor, partially amputating her fingertip.",0
"An employee was cleaning the fitness center when she lost her footing while moving a stationary bike, hitting her back on a treadmill and fracturing her vertebra.",1
"An employee was performing laundry services when clothes in a dryer caught on fire. The employee opened the dryer door and inhaled smoke, suffering lung irritation and exacerbation of asthma.",1
"While walking from the main wastewater treatment facility to an out building, an employee slipped on ice and fell. The employee's head struck the blacktop ground, suffering brain swelling.",1
"An employee was pulling passenger bags in the bag room when he was struck by a vehicle, breaking his left leg.",1
"An employee exited a lift and was walking on pipes when he fell from the pipes to the ground, injuring his wrist and head.",1
"An employee was cleaning when he slipped on a piece of paper and fell out of a dock door, hitting the ground and breaking ribs. He was hospitalized.",1
An employee was lowering a catering box onto a truck chassis when her pinky finger was caught between the frame of the truck and the guard on the back of the truck cab. Her pinky fingertip was partially amputated.,1
An employee was vacuuming sand from the rig sand box when a gas buster that was chained open came down and pinched the end of the employee's left index finger resulting in a fingertip amputation.,0
"An employee was securing a bell hook by wrapping a strap around the A-frame of a side boom when the operator moved the winch, causing the strap to fasten around the A-frame and the winch mounting bracket. The employee's left hand was then caught between mounting bracket and A-frame. The employee suffered a broken left hand, a ring finger compound exposure, and broken middle finger.",1
"An employee's foot was crushed between a dock plate and a clamp, resulting in toe amputations.",1
"An employee tripped and fell to the floor, suffering broken ribs and blood in a lung. The employee was hospitalized.",1
"An employee was performing roofing operations at a house when he walked over the opening of a skylight that had been covered with insulation and fell through it approximately 8 feet to the ground. He received cuts to his head, possible broken ribs, and a back injury, requiring hospitalization.",1
"An employee was climbing down a ladder when the bottom of the ladder shifted. The ladder and the employee fell, landing on his back and breaking his vertebra.",1
"An employee was working in the tool supply room when she tripped over a box, fell to the ground, and broke her hip.",1
An employee was cutting a piece of particle board on a table saw when the employee's left index finger caught the edge of the saw. The saw blade then sliced off the employee's fingertip above the first knuckle. The saw was unguarded at the time of the incident.,0
An employee was unloading a cylinder cage out of a truck when his leg was caught on the truck's side gate. He fell to the ground and broke his left leg.,1
"An employee was working on a Computer Numerical Control (CNC) machine when a part came loose inside the machine. The door of the machine stopped the part, but the door caused the employee to fall off the 15-inch platform and land on the ground. The employee suffered a broken collarbone, broken rib, and other injuries, requiring hospitalization.",1
An employee was walking up and down an aisle inspecting lint cleaners when his right arm became caught in the rollers of a lint cleaner. The lint cleaner was guarded at the time.,1
"An employee was operating a stand-up forklift inside a warehouse. As he dismounted it, his left lower leg was pinned and fractured between the lift and an elevating caster deck. He was hospitalized. The forklift had not come to a complete stop at the time of the incident.",1
"An employee suffered a possible hernia while stacking ice cream on a pallet, requiring hospitalization.",1
"An employee was driving a stock picker when he hit a rack and bounced out of the picker, falling to the floor and suffering a concussion. He was hospitalized. The magnetic aisle guide was not engaged at the time of the incident.",1
"Two employees were installing an aerial service wire to a residence. One employee had connected the line at the pole and ran the wire across the road to the residence while a second employee was working on an 8' ladder to connect the wire at the residence. A car then drove over the wire and it became tangled in the undercarriage of the vehicle, pulling the second employee off the ladder. He fell into the bed of the residence's truck, fracturing ribs and suffering hand burns from the wire.",1
"An employee was unloading a jib boom from his truck bed onto the ground to deliver it to a customer when the chain slipped, causing the unit to tip over and fall on him. He suffered a broken back, shattered pelvis, and damage to the knee and shoulder.",1
An employee was cleaning an area when the employee's fingertip was caught and amputated between two product safety magnets.,0
"An employee was climbing a 12-foot ladder when he fell approximately 5 to 7 feet to the concrete below, injuring his head and requiring hospitalization.",1
"An employee was using chemical cleaners to clean urinals when she experienced coughing and vomiting, requiring hospitalization.",1
"On January 29, 2018, an employee was cleaning up garbage when he tripped over a garbage can and bumped his head on the floor.",1
"An employee fell to the ground while walking from a work cell, suffering a broken hip.",1
"An employee was trying to move an X-ray machine 4 inches away from the wall by sliding a skate underneath it when a board broke and the skate twisted, crushing his right middle finger between the skate and the machine. His right middle finger was amputated at the fingernail.",0
"On January 29, 2018, an employee was performing maintenance on equipment when he slipped and fell. His left hand then then went between a belt and pulley on an adjacent machine, amputating his left middle fingertip. The belt and pulley was unguarded at the time.",0
"An employee was changing a chain on equipment when his hand was caught between the chain and a bolt, amputating his left thumb tip.",1
"An employee was cutting wood with a circular saw when the blade kicked back and he lost control of the saw. The blade then lacerated the fourth and fifth fingers on his right hand, requiring hospitalization.",1
"An employee was attempting to clear a clogged pipe at a cooker when he inadvertently opened a drain instead of closing it. He was sprayed with 240-degree hot product, suffering second and third degree burns across the front side of his body.",1
"An employee slipped and fell on the floor, fracturing her foot and tearing her Achilles tendon.",1
An employee was standing on a rolling table to remove Christmas decorations at the top of the bulletin board. The rolling table moved from under her causing her to fall. The employee was hospitalized for a subdural hematoma and a partial scalp hemorrhage.,1
"An employee was drilling a hole in a wooden mat when the employee's right glove was grabbed by the countersink piece of the drill bit. The employee's right arm was then pulled by the moving drill bit, resulting in multiple fractures of the upper and lower right arm.",1
"An employee was operating a plasma cutter to cut metal when he stepped into the truck area of the cutter, breaking his left leg.",1
"On January 17, 2018, an employee was using a crane to move a piece of steel that weighed over 100 lbs. when the steel fell on the employee's finger, amputating the fingertip.",0
"An employee was using a slider table saw to cut a narrow piece of wood off when the narrow scrap piece fell between the blade and the table. As he attempted to retrieve the scrap, his left middle finger contacted the blade, amputating the fingertip (no bone). The saw was guarded and running at the time.",0
An employee was helping spot a tractor trailer and was caught between the trailer and flatbed resulting in a fractured pelvis.,1
"An employee was moving items in the distribution warehouse when a modified electric pallet jack operator struck him, severely lacerating his lower left leg. He was hospitalized and had surgery.",1
An employee was pressure washing at a location when the pressure washer injected the employee's right little finger.,1
An employee was operating a deli slicer when it sliced off part of the skin on her thumb. She was hospitalized with a severe laceration to her thumb.,1
"An employee and his coworker were repositioning a disconnected steel forklift mast when the mast attachment fell on his left leg, breaking his tibia and fibula and requiring surgery.",1
"An employee was removing a piece of turkey from a de-skinning machine when the machine caught his glove and pulled his right hand into the equipment, amputating his right ring fingertip.",0
"An employee was grinding down a piece of metal using an orbital sander when the sander disc pulled the material down to the work table surface, causing his right thumb tip to be projected into the spinning (2,500 rpm) disc. His right thumb tip was amputated.",0
"An employee was adjusting the forks of her forklift when a second forklift backed into hers, pinning her left arm between the two forklifts. Her left forearm broke and required surgery.",1
"An employee was cleaning grease marks around the drive chain area of a gear/sprocket with a shop towel. The chain caught the towel, pulling it and the employee's hand into the drive chain/sprocket. The employee suffered a partial amputation to the right index finger and three crushed fingers.",1
An employee was setting pieces of 24-inch reinforced concrete pipe when his right arm was caught between two pieces of pipe as they were being joined. His right arm broke.,1
"An employee had just unloaded a truck when a dock plate flipped out of the way, causing the employee to fall and suffer a broken hip.",1
"An employee was carrying and stacking cement blocks when his gloved left pinky finger became caught under a block. As he attempted to pull the finger from underneath the block, his hand came out of the glove and suffered an amputation to the top of his left pinky finger.",1
An employee was pressure washing in an acid tank tanker and sustained chemical burns.,1
"An employee was trying to grab a box of product to turn it around on a conveyor so the label on the box was facing the correct direction. Her gloved left hand slipped off of the box and was caught in the in-going nip point on the chain and sprocket, causing amputations to her left ring and pinky fingers.",0
An employee was delivering mail and turning in a cul-de-sac when the right sliding door of the mail truck slid closed on the employee's right ring finger resulting in amputation at the first joint.,0
"An employee was struck by a stand-up, riding pallet jack.",1
"The employee was repairing the broken shaft on the drum of the conveyor that had been locked out.  His finger was pinched between the shaft and the drum. When he removed his finger, the fingertip was amputated.",0
"An employee was helping a forklift operator erect a 30-foot-tall frame when the employee lost control of the frame and it struck the employee's knee, breaking it in two places. The employee was hospitalized and had surgery.",1
An employee was using a pneumatic cutter to cut a turkey neck when the cutter amputated his middle fingertip.,1
An employee was attempting to repair a lawn mower. The employee's left hand was under the mower deck when the mower blade amputated the employee's left ring fingertip and lacerated the left middle fingertip. The mower was running at the time.,0
"An employee was working on a miniature flexographic machine when the scrap belt stopped. As the employee attempted to reposition the belt, the employee's hand slipped and contacted the belt drive and sprocket, resulting in a partial right thumb amputation.",0
"An employee slipped while getting off a skid steer, breaking a leg.",1
"An employee was prepping chicken fingers to be fried when she backed up into a hot container of grease, knocking it over as she fell on the floor. The hot grease contacted her body, and she suffered first degree burns to her left leg and lower back, requiring hospitalization.",1
"An employee was on a man lift greasing a bridge crane when he hit the controls of the bridge crane. The bridge crane then pushed the man lift until it fell over.  He fell approximately 20 feet to the concrete below, fracturing his left arm and left leg and requiring hospitalization. PPE was worn at the time.",1
"An employee was rolling gizzards around peeler rollers when his left ring fingertip was caught in the roller, resulting in an amputation.",0
"An employee was climbing a ladder to access a hydro-mobile scaffold when the ladder shifted and pinched the employee's finger between the ladder and a scaffold component, causing a fingertip amputation.",0
"An employee was adjusting a truss that was laying on a hydraulic press table when  his left pinky finger became caught in the press, causing an avulsion.",1
An employee was attempting to clear a jam in a dump tote when a solenoid energized and lowered a metal framework onto the employee resulting in severe crushing injuries.  The equipment was not locked/tagged out at the time.,1
"An employee was hooking up a hydraulic hose to a blowout preventer beneath the work floor when a clamp on the cable holding the rig floor broke, causing the rig floor to fall. The employee was pinned between the rig floor and the blowout preventer, suffering a facial fracture.",1
"On January 30, 2018, an employee fell approximately 12 feet while descending a ladder inside a building. The employee was hospitalized with fractures to the ribs, pelvis, and femur.",1
An employee was removing a sheet of cracked tempered glass from a truck and caught a finger between the glass sheet and the truck step crushing a fingertip.,1
"An employee was using a high-pressure sprayer to clean inside a vessel when the spray nozzle trigger became stuck. As the employee attempted to loosen it, it sprayed his left leg, cutting it.",1
An employee was between two asphalt rollers when one of them moved and caught the employee between the two rollers. The employee suffered broken ribs and a fractured collarbone.,1
"An employee was opening a gate for a delivery truck when the truck ran over the employee's right foot, fracturing the ankle.",1
"An employee was using an oxy/fuel gas cutting torch to dismantle a railcar when a small pinhole developed in the oxygen line near where the hoses meet the torch, causing a leak. Oxygen then migrated up the employee's sleeve inside his protective leather-cutting jacket and ignited. He received second and third degree burns on his right shoulder, armpit, and upper chest.",1
"An employee was under a tractor-trailer placing masking tape on items to be painted while a second employee was working on the airline for the air brakes. The second employee then tested the airlines, which caused a rear axel to fall on the first employee's left leg. The employee suffered lacerations and a possible fracture.",1
"An employee was bleeding down an injector line to bring a well back online when the line blew at a 90-connection.  A 14-foot, 6-inch section of pipe blew out and broke the employee's tibia/fibula.",1
"An employee was preparing to re-install a repaired hydraulic cylinder onto an excavator when the cylinder detached and fell on the employee's left index fingertip, amputating it.",0
An employee was walking to her car and fell breaking the right hip.,1
An employee was walking on the curb to get on the bus when the employee tripped on the curb and fell backward. The back of the employee's head struck the pavement resulting in a head injury.,1
An employee was reversing a forklift while moving equipment/merchandise when his left foot was pinched between an I-beam and the forklift.,1
An employee was using a pipe wrench to loosen a fitting on a hot oil truck when the wrench slipped and amputated his left index finger.,0
"An employee fell while climbing a rolling ladder, suffering a possible head contusion, body numbness, and a neck strain.",1
"An employee was moving a 50-pound barrel in the back of a box truck when he lost control of the barrel and his finger was caught between another barrel, resulting in a finger amputation.",0
"Am employee was walking up to a parked lift to get some paperwork when the lift moved, striking his foot and breaking two bones.",1
"An employee was driving a forklift when his left leg was caught between the forklift and a building support pole, breaking it.",1
An employee was walking out a door and fell onto the concrete sidewalk fracturing her right hip.,1
"On January 31, 2018, an employee was caught between two bales when a forklift operator tried to pick up a bale, which slid into the one behind it. He was hospitalized with broken clavicles.",1
"An employee was going down a two-step ladder at the raised dock section when he fell backwards off the ladder and struck his head on the concrete floor, briefly losing consciousness and fracturing his skull.",1
"On January 31, 2018, an employee was felling an oak tree that became hung up on a rotten tree, which caused the rotten tree to snap, fall, and hit the employee. The employee was hospitalized and had surgery for facial fractures, a forehead laceration, broken bones, a lacerated liver and a brachial plexus injury.",1
"An employee fell off an 8-foot ladder while performing residential construction, hitting the porch surface below and tearing ligaments in his back. He was hospitalized.",1
"On January 31, 2017, an employee was installing a 4-inch by 4-inch board to flatten bags on a conveyor line when the employee's left hand was caught between the board and the conveyor amputating the left index finger to the first knuckle.",0
"An employee was operating a boring machine. He was attempting to remove a chip when he was caught between the machine housing and the boring arm, suffering a compound fracture to his right forearm near the elbow.",1
"An employee was tripping pipe (drilling the pipe down) and screening a drill collar into a stump. He and another employee pushed the tongs into the spinning pipe. The tongs then bit back, crushing him between the tongs and the derrick leg. He received fractures to his upper torso and punctured both lungs.",1
"An employee was assaulted by another employee resulting in a broken jaw, nose and eye socket and head trauma.",1
"An employee's ankle was pinned between a pallet jack and a pole outside the store, resulting in a compound fracture to the ankle. The employee was hospitalized and had surgery.",1
"On January 31, 2018, an employee was processing returned product (a 3-bar bundle of 6-inch diameter round 120-inch long steel bars). He was cutting the metal straps that secured the bundle to the pallet. When he cut the fourth and final strap, the top bar sank down between the two bottom bars and one of the bars rolled onto his foot, fracturing his first and second metatarsals.  He was hospitalized.",1
An employee was being trained on a powered industrial vehicle when the employee's right foot was caught and fractured between the vehicle and a charging station. The employee was hospitalized.,1
"An employee was in a harness and was raised in the air with a winch line to remove a T-valve on top of a pipe. As the operator raised him up, the counterweight of the winch became caught on the tubing board and built up tension on the winch line. As the tension built up on the winch, it gave way and catapulted the employee through the air.  The employee suffered pelvic injuries.",1
"An employee was cooking with a tilt skillet that had boiling water when it leaned forward and spilled, burning both of his feet and his right leg.",1
An employee fell backward and struck the back of his head while negotiating a stairway. He was hospitalized with a brain bleed.,1
"While walking through a door opening, an employee slipped and fell to the ground, breaking a hip. The employee was hospitalized for surgery.",1
"An employee slipped and fell on ice in the parking lot, suffering an elbow injury that required surgery.",1
"An employee was trying to light a burn box, but the ignition switch was not working. The employee used a hand torch to ignite the burn box, and the flames flashed in his face, causing first and second degree burns.",1
"An employee was operating a shot blaster to clean parts. He mounted a platform on the shot blaster to remove a part from the machine. He then stepped back off the platform, lost his balance, and fell less than 48 inches to the floor, breaking his right hip.",1
An employee was operating a 90-ton saw to cut aluminum when the blade amputated the employee's left index fingertip to the second joint and middle fingertip to the first joint.,0
"An employee was retrieving a product from a pallet. After picking up the product, she turned and inadvertently tripped, causing her to fall and fracture her hip. She was hospitalized and had surgery.",1
An employee was climbing down a ladder when he missed a rung and fell backward. He hit the floor and was hospitalized.,1
"An employee helped a driver reconnect a dumpster to the dumping mechanism on the back of a truck. The driver then went to the other side of the truck to operate the dumpster, but the bin slipped out again. The employee again went to re-attach the dumpster as the driver began to operate it. The employee's right middle fingertip was caught between the dumpster and the dumping mechanism, amputating it.",0
"An employee was cleaning a mixer with a can of air when it ignited, burning the employee's forehead and hands.",1
An employee was attempting to lift a bundle of angle iron to create space for a ladder when the employee's middle finger was crushed between the steel and the underlying wood.,1
"An employee was kneeling on the floor and raising a hoist with a roller, using the pendant to change a roller at the bottom of a press. The employee's left hand was on top of the hoist rail when he raised the hoist using a pendant, and his left pinky finger was pinched between the hoist rail and the machine's frame, amputating the fingertip.",0
"A maintenance employee was using a scissor lift to access and clean the interior windows on a garage door when another employee activated the door from the outside of the facility, knocking the lift over. The employee hit the floor and suffered a fractured pelvis.",1
"An employee was greasing the bearing on a wood chipper when his left hand was caught in the fan, amputating four fingers. The wood chipper was running and the fan was unguarded at the time.",1
"On January 30, 2018, at approximately 11:30 a.m., an employee was spreading salt in the lumber entrance area when he slipped, fell, and struck his head on the ground, suffering a brain bleed that required hospitalization.",1
"On January 31, 2018, at 11:30 a.m., an employee was struck on the left wrist and the left side of his torso by the end of a truss that broke in half as it was suspended from a crane. He suffered a bone bruise to the left hand, torn left rotator cuff, three broken ribs, and a hematoma of the left lung, requiring hospitalization.",1
"An employee was trying to clear a jam on a six-head saw belt when the conveyor belt caught his glove and pulled his right ring finger underneath a guard, amputating his fingertip.",0
"An employee was delivering mail when he slipped on snow and ice and 
fell to the ground, cutting the left side of his head.",1
"An employee became ill while cleaning with a grinder, requiring hospitalization for an abdominal hernia.",1
"An employee was operating a pallet jack. When he stepped off, he moved the handle on the pallet jack, which proceeded to hit his left ankle, severely lacerating it.",1
"An employee was working on the multi-gallon conveyor line while using a line jack to raise the conveyor line. The conveyor line slipped off the block and crushed the employee's left ring finger, amputating the fingertip and nail.",0
An employee was putting garbage into the dumpster and passed out striking his head. The employee was hospitalized for a head injury.,1
An employee sustained a bulging disc in his neck while lifting a cardboard file box.,1
An employee was saving palletized boxes in a storage container. He stood up on the dashboard of the forklift with the back lever down causing the forklift mast to tilt back and pin him between the forklift cab and forklift mast.,1
An employee was setting up the warning fence around the top of an excavation when he stepped back and fell into the trench striking his head. The employee was hospitalized for a concussion.,1
"While walking on a welded frame, metal scaffold, approximately five feet off the ground, the injured employee went to grab a 2x4 that was over the doorway and fell resulting in broken ribs and a lacerated spleen.",1
"An employee was testing and adjusting a valve assembly. As he was walking towards the valve assembly, that was mounted in a bench vise, his foot caught the air hose in front of the bench, causing him to lurch forward with his hands extended to catch himself. His right index finger entered the one-inch port of the valve as his left hand forced the 24 VDC supply leads connected to the solenoid operated valve to contact one another and short. When they shorted, the valve cycled and amputated the tip of his finger.",1
"An employee was preheating a gooseneck with a torch on a machine when an electrical panel exploded approximately 6 feet behind him. He was knocked to the floor and found unconscious. He suffered bleeding, head trauma, and a broken arm, requiring hospitalization.",1
An employee was trying to tie the boat to the barge and fell off the boat into the cold water. The employee suffered dry drowning and was hospitalized.,1
"An employee was standing on the welding production table, welding a steel gate. He fell off the table and his torso struck the top railing of the steel gate. The employee was hospitalized for four broken ribs.",1
"An employee was walking downstairs, passed out and fell down the stairs resulting in a fractured skull.",1
An employee was performing maintenance on the frac pump and was using a pry bar to roll the pump for re-packing. The pry bar slipped and struck the employee's head. He then fell striking his head on the ground and sustained a concussion.,1
"An employee was restocking pallets that had fallen over on his flatbed trailer when he stepped backward and fell off the trailer to the ground, fracturing his right forearm.",1
An employee was connecting/disconnecting a dolly when the dolly tongue did not disengage properly and struck the employee's lower left leg resulting in a fracture that required surgery.,1
"An employee was honing a pipe, saw oil spilling out of the machine and used a finger to stop the oil resulting in amputation of the left middle fingertip.",0
"An employee was walking to her car in the dark, tripped over a parking bumper and fell. The employee was hospitalized for hip displacement.",1
An employee was connecting the converter dolly to the trailer. He grabbed the part of the dolly that connected with the trailer and his hand was caught between the interlocking pieces fracturing it.,1
The employee was lifting a box containing a microwave by the handle. The handle broke and the employee fell onto their back resulting in a collapsed lung.,1
"An employee was stepping down from the truck, lost his balance and fell to the ground resulting in a broken right hip.",1
"An employee was working at the cash register, walked behind the counter, tripped over a cord and fell onto her right hip and fractured it.",1
"An employee and coworker were moving a pallet jack with a forklift when the pallet jack flipped and fell, landing on and smashing his ring finger. He was hospitalized and had surgery. His ring finger was amputated.",1
An employee fell while descending a ladder and fractured their lower back.,1
The stabilizer from a low deck unloader struck and crushed an employee's foot while unloading baggage from a plane.,1
"On February 1, 2018, two employees were unloading equipment from a truck. The injured employee was pulling the equipment while a coworker pushed from the other side. The equipment's casters were caught on the edge of the ramp and the equipment tipped over, falling on top of the injured employee, resulting in a back injury that required hospitalization.",1
"While troubleshooting a booster pump, the cylinder actuated, pinching and amputating the employee's right ring finger.",0
"An employee was performing demolition activities. The employee removed a ceiling tile and liquid from a water pipe spilled onto the employee. Shortly thereafter, the employee suffered lack of muscle control, nervous system depression, and memory loss. The employee was hospitalized.",1
An employee was operating a stand-up forklift and pinned his left foot between it and another stationary stand-up forklift resulting in a broken foot.,1
An employee was working a punch press and amputated his left index finger to the second knuckle. The press was guarded at the time.,1
A technician was treating insulation in an attic when he fell through the ceiling and onto the floor of a residential home resulting in a fractured hand and L-3 vertebra.,1
An employee was installing skirt board around a stair radius. The board sprung back striking the employee and knocking him off the ladder. The employee sustained a head injury and a broken collar bone.,1
An employee tripped over a pipe and fell at a worksite resulting in bruising and swelling of the hip.,1
An employee was opening an oil valve at a client site. Pressure blew the employee off the platform and onto piping below resulting in a fractured back.,1
"An employee was sitting on a haul trailer when an ATV backed into him pinning him against the haul trailer. The employee was hospitalized for a fractured right femur, a broken nose and a one-inch laceration on his right check.",1
"An employee was attempting to clean a meat grinder by hand when the machine was activated, amputating the employee's right middle finger to the knuckle. The meat grinder was not locked out at the time of the incident.",1
"An employee was working from a man lift, installing siding to the exterior of the building. The employee unhooked his lanyard to enter a third floor window opening, when he slipped and fell to the ground below. The employee was hospitalized for a concussion and a broken foot.",1
"A welder employee was stamping a part number onto the metal rim of a tire with a metal stamp and carbon steel hammer. When the employee struck the metal stamp with the hammer, the hammer shattered and shrapnel struck the employee in the midsection. The employee was hospitalized for surgery to remove the metal pieces.",1
A ski patroller was making rounds through trails and struck a tree resulting in five broken ribs.,1
"An employee was struck by a forklift and pinned against a merchandise storage rack in the warehouse. The employee sustained three fractured ribs, pelvis and lower back as well as internal bleeding.",1
An employee was loading steel bars onto a loader and pinched their left hand between a bar and the frame of the loader resulting in amputation of the left middle fingertip.,0
An employee was closing the safe for the night and caught her right middle finger in the door resulting in amputation.,1
An employee was pushing a cart weighing approximately 384 pounds and attempted to push it over a hose. The cart tipped over and the handle fell on her left foot fracturing it. She was hospitalized for surgery.,1
"An employee was walking and performing a visual inspection of the fire protection system, slipped on mud and fell fracturing the knee.",1
"An employee was exiting her vehicle, slipped on a patch of ice and fell breaking an ankle.",1
An employee stepped through a hatch on a catwalk and fell approximately seven feet to a platform below injuring his shoulder. The employee then rolled off the platform approximately another seven feet resulting in multiple broken bones. The employee was hospitalized.,1
An employee was making a delivery at a customer location. The employee slipped on ice while exiting the truck and fell. The employee was hospitalized with a head injury.,1
An employee was operating a standup forklift and caught his foot under the lift resulting in a leg fracture.,1
An employee was walking through a doorway when the employee's smock got caught on the door handle. While trying to free the smock the door closed onto the employee's hand resulting in an amputation injury.,0
"An employee was using an impact driver to screw on the cover of the electrical panel and contacted a live wire. The employee was hospitalized for burns to his hands, arms and stomach as a result of an arc flash.",1
"On February 2, 2018, an employee was operating a foot pedal activated shaver screw machine and amputated the right middle finger to the first joint. The point of operation was not guarded at the time.",0
An employee was using an oxygen lance to clean a cupola slag runner (a portion of a foundry furnace) when the oxygen line supplying the lance failed causing a flame to strike the employee and enter his glove. The employee sustained third degree burns to the back and palm of his right hand.,1
An employee slipped on ice and fell as they were walking from their car into work. The employee was hospitalized for knee surgery.,1
An employee was working from a 10-12 foot extension ladder and fell to the ground resulting in injuries to the employee's left wrist and shoulder.,1
"The employee had parked his fork truck. He was stepping down from the fork truck when his left heel hit a plastic pallet and he lost his balance, twisting his leg and falling to the ground. The employee sustained a fractured femur.",1
An employee was moving a large job site tool. The tool fell and caught his right hand resulting in amputation of the pinky fingertip.,1
"After parking a security vehicle and getting out, an employee slipped on ice in the parking garage and fell resulting in a broken ankle that required surgery.",1
An employee was removing a sprue from a machine and the machine closed on his right hand. The employee sustained a thumb amputation and a broken fore finger and middle finger.,1
"An employee was attempting to raise the tongs up off the rig floor with a hoist when a safety pin became hung on the floor grating. The employee had his hand on the tongs while trying to see what they were hung up on. At that time, the tongs came free from the floor grating and caught the employee's left pinky finger between the tong body and mid rail resulting in amputation.",1
An employee was attempting to remove a piece of dough ball from a machine when his right hand contacted the chain and sprocket mechanism. His right index finger was amputated to the second knuckle. The chain and sprocket were unguarded at the time of the incident.,1
"The injured employee was standing next to his forklift replenishing the roller racks (by hand). Another forklift operator passed by and struck the injured employee's forklift, which pinned his left foot between his forklift stabilizing arm and the rack resulting in amputation of two-thirds of his left big toe.",0
A security guard was making his rounds when he slipped on ice and fell injuring his back and neck.,1
An employee fell down the stairs outside the main office resulting in a lower back injury.,1
An employee was riding a pallet jack when he tried to stop the jack using his foot. The pallet jack then crushed his right foot.,1
"An employee was loading wood into a saw when he was pinched between the arm of the live deck that loads the lumber and the saw transport, rupturing his lower intestine.",1
An employee was cleaning the floor in the security post when he began having pain that radiated from his neck down his left arm. The employee suffered a heart attack.,1
"An employee's finger was pulled into a laminator while changing a roll. The employee's fingertip was caught and amputated between the web and guard, causing the machine to shut down.",1
"An employee was bent down checking the burner of a stove. A second employee was carrying a pot of hot soup to place in the soup jacket on the stove. He lost his grip on the soup pot due to a weak spot on the glove. The hot soup poured onto the first employee's head and right shoulder, causing burns.",1
"An employee was removing dough from a dough hopper when the employee's right middle fingertip was caught in the plastic auger. While pulling the hand back, the employee suffered an amputation to the right middle finger nailbed.",0
An employee was operating a CNC lathe when his left index finger was caught and amputated between the material and the tool.,0
"While providing ski lessons on a ski trail, an employee fell and sustained rib fractures, a lung contusion, transverse process fractures, and a fractured clavicle.",1
An employee was operating a pneumatic assembly press when the PLC programming did not activate the anti-repeat/anti-tie down feature and the press cycled. The assembly press ram/tooling then amputated the employee's left index finger at the second knuckle.,0
"An employee retrieved two hams to slice for a customer and placed one of the hams on the table of a vertical band saw. When the employee made the first cut, the moving blade amputated the employee's right index finger above the middle knuckle. The guard was raised in the highest position which did not guard the saw blade.",0
"After salting the roads, an employee returned to the shop to clean the truck. The employee's hand and glove became stuck in the salt auger at the back of the truck. His hand was pulled into the auger, amputating it to the wrist.",0
"An employee was riding a horse when it saw or smelled a mountain lion and spooked, bucking twice. On the first buck, the employee's face smashed into the crown of the horse's head. On the second buck, the employee was thrown to the ground. The employee suffered blunt force trauma to the facial area, including a broken jaw, sinus damage, and three broken bones near the right eye. The employee also sustained a broken right wrist upon hitting the ground.",1
"An employee was aligning a new fabric belt that was installed on a conveyor system. While handing a tool to a helper, the employee's left hand was caught between the conveyor belt and the tension roller. The employee suffered multiple fractures and abrasions to the left hand, requiring hospitalization.",1
"An employee tripped and fell, injuring her lower back and requiring hospitalization.",1
"While working on a machine, an employee was exposed to air contaminants generated by floor stripping operations down the hall. The employee suffered a respiratory reaction and was hospitalized.",1
"An employee was hydro-blasting a 2-inch line with a flex lance at approximately 18,000 psi. The tip inadvertently exited the pipe, striking him in the left arm. The contact resulted in a blunt force abrasion and a possible water injection. He was hospitalized.",1
"An employee was moving a stone display board when it smashed his left hand, requiring hospitalization.",1
An employee was closing the truck trailer door and caught their left middle and ring fingers in the seam between horizontal door panels. The employee was hospitalized for a crushing injury to the fingers.,1
An employee was loading peanut stock onto a scale from a hopper. An inspection cover was removed and his hand was inside an inspection-hole opening when another employee started the fan. The fan blade then partially amputated his right middle finger.,0
"An employee entered a production line to make adjustments when he was hooked by the hoist and dragged down the line. The hoist pulled him through a 12-inch gap between two I-beams. He suffered broken ribs, a lacerated spleen, and cuts to his leg, requiring hospitalization.",1
An employee was assembling formwork when a section of formwork fell to the side and struck the employee resulting in a broken leg.,1
"An employee was moving air freight bags when he tripped on an air freight bag and fell to the floor, fracturing his kneecap.",1
"An employee was leaving the breakroom when she tripped over the carpet transition, breaking her wrist.",1
"An employee was coming in from an outside area as another employee was exiting. When the door opened, it hit the employee and caused him to fall to the floor, fracturing his hip.",1
"An employee was feeding a parrot when it bit her left index finger, requiring hospitalization.",1
"An employee was cleaning the inside of a car. As he was exiting the vehicle, his foot became stuck on the door and he fell outside of the vehicle to the concrete, suffering a spinal injury and paralysis that required hospitalization and surgery.",1
"An employee was drilling front frame styles on a drilling machine. She pushed a piece in and her right middle finger was pulled under the plunger, amputating her fingertip. The plunger was foot-operated.",0
"An employee was struck by a falling piece of a hot water tank, suffering a fractured left leg.",1
"An employee slipped and fell on the floor, which was wet with snow from outside, breaking the right kneecap and damaging the tendon.",1
An employee was adjusting stamps in a roll mark machine when it amputated the employee's left ring fingertip.,0
An employee was helping a crane lower a column when his left thumb was caught between the hook and rebar. His left thumb fractured and his thumb tip was amputated.,0
An employee was troubleshooting a packaging machine and was positioned between the top and bottom films when the machine cycled. The employee's right index finger was then caught and partially amputated in an in-running nip point. The machine was guarded at the time of the incident.,0
"On February 5, 2018, an employee wearing shoes with cleat attachments slipped and fell to the floor, suffering an ankle injury requiring surgery.",1
"An employee was moving laser guided vehicles (LGV) due to a jam up. One was in manual when another came up in auto. The employee kicked the sensor to stop the LGV in auto. The LGV reset after 15 seconds and started up again, trapping the employee between the two LGVs. The employee was hospitalized with a laceration and avulsion to the right calf.",1
"An employee slipped on ice and fell in the parking lot, suffering a fractured vertebra.",1
"An employee was using a rolling machine to roll flat pieces of metal (about 8"" x 12"") into a tube that is then seam welded at another machine when the employee's left hand was injured, requiring the surgical amputation of four fingers.",1
"An employee noticed a belt guard was off-center and was attempting to move the guard when his fingers wrapped around the back of the guard, coming into contact with the pinch point of the belt and pulley. His left index fingertip was amputated.",0
"While dismounting a front-end loader, an employee slipped from the steps and hit the ground, breaking a shoulder and ribs.",1
"An employee missed a step while walking down a flight of stairs, injuring her right and left ankles.",1
"On February 5, 2018, an employee tripped over a dust pan while sweeping the kitchen and fractured a femur.",1
"An employee was moving product from the back of a parked 18-wheeler to the back of a box delivery truck when he fell to the ground, fracturing his ankle.",1
"An employee was using a telehandler to move cargo when a front loader lost traction at the top of a hill and slid down into the telehandler as the employee was trying to get out, crushing his right leg and pelvis.",1
An employee was conducting maintenance on a hydro flaker machine that was turned off and locked out. The employee manually tuned a pulley and his finger was caught in the belt. His right middle fingertip was amputated.,0
"On February 5, 2018, an employee was attempting to lift a steel coil when it fell on and pinned the employee's left leg, breaking the femur. He employee was hospitalized.",1
"An employee was changing the bogie/axle on a trailer. The employee was underneath the bogie of the trailer when the jack holding the trailer up slipped away, allowing the bogie to fall and strike the employee. The employee suffered a broken rib and two bruised ribs.",1
"An employee was using a 2x4 to help guide an injection core block onto some shelving when the board slipped, resulting in the block smashing his fingers. His left ring and pinky fingers were severed at the tips with about half of his fingernails removed.",0
"While on an aerial lift, an employee was removing a tree top using a chain saw when the tree top fell backwards and struck the employee. The force of the contact drove the employee's face into the lip of the aerial lift's bucket. The employee suffered a broken nose and several facial fractures.",1
"An employee fell while reaching for an elevated caustic hose, hitting a cell landing and suffering fractured ribs and a ruptured spleen.",1
An employee was wheel-barrowing patch mix to the bench area of an oven when he lost his balance and the wheel barrow tipped over. The handle hit his leg and he fell 12 feet to the next level. He was hospitalized for an internal injury around his kidney.,1
"An employee was walking when he stepped on a loose piece of concrete and lost his footing. He fell to the ground and broke his left tibia and fibula, requiring hospitalization and surgery.",1
"An employee was climbing a ladder to put up scaffolding. He was being handed a scaffold plank when he slipped from the ladder and fell 18 feet to the ground below, injuring his spine, head, and face.",1
An employee was shot in the shoulder by an armed robber who walked into the store.,1
"An employee was on a ladder removing a light fixture with a screwdriver when he fell backwards off the ladder from approximately 4 feet, injuring his right arm and pelvis.",1
"An employee was in an order picker counting product for inventory when he misstepped and fell approximately 5 feet to the concrete ground below, breaking five left-side ribs.",1
"A temporary employee was feeding Styrofoam through a table saw when the foam jumped, causing the guard to move and expose his fingers to the blade. He received multiple cuts to his right hand and amputation of his right middle fingertip.",0
"An employee was charging a furnace by adding material using a powered industrial vehicle. An explosion occurred, causing a fireball to come out of the furnace. The employee jumped from the vehicle to avoid the fireball and landed on the ground. He suffered first and second degree burns to the forehead and injuries to his left knee.",1
"An employee lost control of a pallet jack, tried to avoid hitting a door, and stepped on the brakes. His leg was then caught between his pallet jack and a second pallet jack, breaking his ankle and fibula.",1
"An employee had exited his vehicle to make a delivery when he slipped and fell on black ice, striking his head on the ground.",1
"An employee was exiting a job trailer when he tripped and fell, breaking ribs and requiring hospitalization.",1
"An employee was talking to an edger operator while standing in front of the edger when a board from the edger kicked back and struck the employee's right leg, fracturing it.",1
"On 02/06/2018 at 1:30 p.m., an employee was riding in a four wheeler utility vehicle that was pulling a trailer when the vehicle began to hydroplane on the wet road. The employee dismounted from the vehicle and was struck by the trailer in tow, suffering a broken leg.",1
"On February 6, 2018, an employee was unloading pipe from a lift gate when the employee tripped off the end of the lift gate and landed on the ground, suffering cracked ribs and a back injury that required hospitalization.",1
"An employee was operating a lever to kick feed out from the chuck of a horizontal turret lathe when a metal shaving came out and struck the employee's left hand, causing a deep laceration between the thumb and index finger. The employee suffered tendon damage that required hospitalization and surgery.",1
An employee had a water spray hose on her shoulder when she leaned in to look at a meat cutter machine during inspection. The water spray activated the machine and amputated the employee's left middle fingertip.,0
An employee was letting the air run through the bags on a vacuum truck when he adjusted the door to the truck and it slammed on his fingers. His middle fingertip was amputated.,0
"An employee was checking inside a trailer to see what liquid had spilled and why. Paint stripper had spilled onto the doors of the trailer. The employee closed the door on the trailer and the paint stripper splashed into both eyes, requiring hospitalization.",1
"An employee was loading tires on a picker that was approximately 15 feet high when he fell off the picker, fracturing his legs.",1
"An employee chipped concrete from inside a mixer. After re-energizing the mixer, the employee noticed that the chipping tool attached to the airline was still inside the mixer. When the employee attempted to retrieve the tool, the mixer paddle cut the employee and caused muscular damage. The mixer not locked/tagged out at the time.",1
"An employee was attempting to place a spacer in a forklift's hydraulic sleeve cylinder when the employee's hand was caught in a pinch point, fracturing and lacerating a finger.",1
Two employees were struck by a vehicle while it was backing into the service garage. An employee suffered a broken leg and was hospitalized.,1
"An employee was repairing a generator and testing the system for a leak when the generator's rotating fan blade struck his right pinky finger, resulting in a fingertip amputation.",0
"An employee was using a wrench to fix a leak on a feed line from a tote to a metering pump when one of the cam locks for the tote cap cover came loose, spraying the employee with 93% sulfuric acid. The employee suffered chemical burns.",1
An employee was helping to move bundles of steel with an overhead crane when the steel fell and struck the employee's right leg.,1
"An employee was walking across a parking lot with his hand tools. The lot had been plowed and salted but patchy snow/ice was present. He slipped on the snow/ice and fell, fracturing his ankle and requiring surgery.",1
"On February 6, 2018, an employee was attempting to remove a jammed bottle from a machine when the die closed on his right hand, partially amputating his index finger to the first joint and injuring his middle finger. The machine was not shut down at the time.",0
"During rig down operations, an employee's left index fingertip was amputated.",0
"On February 6, 2018, at approximately 6:25 p.m., an employee was installing and aligning deck frames on board a ship when his left index finger was caught between the metal deck plate and frame, resulting in a partial amputation to his fingertip.",0
"An employee was securing a tugboat to a barge when his hand was caught in the rope and bitt, partially amputating the index, middle, and ring fingers.",1
"An employee was using a circular saw to cut a 2x4 when he contacted the blade, resulting in an amputation to his left index finger.",1
An employee was struck by a rubber hose that was displaced from the boom of a concrete pump truck.,1
"While descending a ladder platform in the plumbing department, an employee missed the last step and stumbled. The employee's head hit the floor, requiring staples and hospitalization.",1
"On February 6, 2018, an employee was driving a forklift when a piece of a plastic bumper became caught in the tire and flung up, striking his face. He suffered facial fractures, a cut on the eye, and facial swelling, requiring hospitalization.",1
"An employee tripped and fell on ice in the parking lot, requiring hospitalization.",1
"On February 6, 2018, an employee was operating a ride-along pallet jack when the employee's foot slipped off the pallet jack. The employee's ankle was then pinned between the pallet jack and a rack rail, suffering a laceration.",1
"An employee was sand blasting on the outside wall of a water tower when he lost his balance and fell at an angle. He hit the ground, breaking one rib and puncturing a lung.",1
"While moving trailers with a shag truck, an employee complained of chest pains and was hospitalized.",1
An employee fell 6-8 feet off a ladder while traversing over a wall resulting in broken ribs and a bruised clavicle.,1
"An employee was holding a pole and waiting for a forklift to push the pole into the ground. The pin was missing on the forklift forks, allowing them to fall and hit the employee's lip. The employee fell to the ground and suffered a back injury.",1
"A temporary employee was walking in a cooler with a temperature of -25 degrees when he slipped and fell, breaking his left ankle.",1
"An employee's foot was caught in computer cords as she got up from her desk. She fell, striking the left side her body and fracturing her hip.",1
"An employee was working on a lighting issue while standing on a step ladder. As he climbed down the ladder, he missed the last rung and fell to the pavement, hitting his head and suffering a concussion that required hospitalization.",1
An employee was struck by a moving vehicle while setting up a traffic control plan to install a sign. The employee suffered a head injury.,1
An employee was electrocuted while repairing a steam generator. The energy isolating device (LO/TO) for the machine was not used at the time of the incident.,1
"While positioning a new cable around a new transformer, an employee contacted an electrical line, burning both hands.",1
"On February 6, 2018, an employee carried a metal clamp (die) on a hoist and set it down on the edge of a table. The metal clamp then fell on his right leg, fracturing it and requiring hospitalization.",1
"An employee was cleaning grease from the front hydraulic coupling hoses of a wheel loader to align the holes and coupling pins manually. Once the coupling pins were aligned, the system's hydraulic system was ready for testing. A second employee climbed into the wheel loader's cab as the first employee examined the pins. The second employee turned the wheel loader key, which automatically engaged the pins. At the same time, the first employee tried to clear out some additional grease from the coupling hole. The first employee's right middle finger was crushed at the nail bed by the hydraulic pin, resulting in amputation of the right middle finger at the nail bed.",0
"An employee slipped on ice on the sidewalk when leaving the building, fracturing the left arm.",1
"An employee was run over by a powered industrial truck while cleaning the yard, suffering severe dislocations of the right-foot toes.",1
"An employee was helping an operator close a barbed wire gap. The gap was stretched across some digging mats (placed that morning) on a temporary crossing that was used to contain cattle. While attempting to close the gap, he walked backwards on the construction mats and stepped in a hole between them. He then fell backwards, landing on his right hip. The mats were uneven and were elevated right where he landed. He was hospitalized with a broken right hip/femur, requiring surgery.",1
"An employee was replacing a hydraulic cylinder on a baler when the cylinder slipped from his hand and pinched his middle fingertip, amputating it (no bone loss).",0
An employee was on an electric pallet jack moving boxes and got his left foot/ankle caught between the jack and a pallet of product resulting in an ankle fracture.,1
An employee slipped on ice in the parking lot and fell. The employee was hospitalized for head trauma.,1
An employee suffered electrical burns requiring hospitalization during routine maintenance activities on powered equipment.,1
"An employee was on a step ladder securing a pipe. Afterwards, the employee pulled on the pipe to verify that it was secured and the pipe gave way. The employee then fell 15 feet to the concrete ground below resulting in two broken legs.",1
An employee was using a portable hand saw to cut up a wooden pallet for the trash and lacerated the right arm.,1
"An employee was working behind the cash register, tripped over shopping bags on a hook and fell to the floor chipping her right hip bone. She also sustained contusions to her ribs and face.",1
An employee was conducting maintenance on a sugar tank and fell into the tank. He became stuck and lost consciousness.,1
An employee was operating a bag machine and amputated his fingertip.,0
"An employee was replacing belts on the grain elevator gearbox. While removing the belts, the belt tensioner released striking the employee's right forearm resulting in lacerations and a broken bone. The employee was hospitalized for surgery.",1
An employee was replacing the belt on the blower motor of a flour silo when the motor energized and amputated the left middle fingertip.,0
An employee received first and second degree burns to the face and arms and two small third degree burns on a finger and thumb when a network protector arced and blew back. Part of the door came off and went into the energized parts within causing an arc flash.,1
"An employee was walking across the roof and fell approximately 20 feet through a skylight. The employee sustained broken heels, a broken ankle and broken bones in the back.",1
"An employee was hooking up the converter dolly to connect a second trailer. As the employee was pulling on the dolly to position it, his left pinky finger was crushed between the trailer bumper and the converter resulting in surgical amputation of the fingertip.",0
An employee slipped on ice and fell in the parking garage resulting in an injured ankle.,1
An employee was on the back of a goose neck flat bed trailer approximately four feet high unloading racks made out of pipe. As he started to unbind chains on two racks they slipped and started to fall. The employee then fell off the trailer to the ground and was pinned between two racks. The employee suffered an abdominal injury as a result of the incident.,1
"An employee was taking measurements along a sidewalk, slipped on ice and fell hitting the back of his head on the ground.",1
An employee was replacing a wheel on a forklift. When the employee lowered the jack on the forklift the employee's right thumb was caught in the wheel spindle resulting in an amputation.,0
An employee was driving to an oil and gas site and drove into a river/ditch.,1
"The injured employee was adjusting a pallet when another employee placed product onto the pallet that the injured employee was adjusting, pinching the injured employee's right middle finger between the pallet and a spacer resulting in a fingertip amputation.",0
"On February 7, 2018, an employee received a partial left middle finger amputation while changing a mold on a blow molding machine.",0
An employee slipped and fell causing a head injury.,1
An employee tore a bicep muscle while attempting to lift the hood of a truck.,1
"On February 7, 2018, an employee was operating a powered industrial truck and sustained a partial left thumb amputation when it was caught in a hole on a metal rack.",0
Two employees were stacking blocks of ice for an ice sculpture. One of the blocks landed on the injured employee's left middle finger resulting in amputation at the knuckle.,1
"An employee was putting a tarp on a vehicle trailer, slipped on ice on the trailer and fell approximately four feet.",1
An employee was operating the vertical mill press when the employee's jacket sleeve came in contact with the rotating counter bore bit. His left arm was pulled around the machine fracturing it and also causing many lacerations.,1
"An employee was cleaning the roll coater to prep it for the next adhesive by wiping down the rolls with a rag. During that process, the employee's right hand and arm were pulled into the roller up to just before his elbow crushing them.",1
An employee was walking by a blood canister when the canister filter fell and struck the employee's right leg lacerating it below the knee.,1
An employee slipped on ice on the trailer floor and fell sustaining a head injury.,1
"An employee was getting out of his truck, slipped on ice and fell breaking a leg.",1
"On February 7, 2018, two employees were talking on a dock. One employee was standing (injured) and one employee was on a forklift. As the standing employee turned to walk down the dock, the other employee turned the forklift to enter the trailer. The tail swing of the forklift caught the employee who was on foot on the right ankle fracturing it.",1
An employee was working underneath a long life vehicle (standard mail truck). He lowered the jack while still being underneath it and the vehicle fell on his right shoulder and sternum. He was admitted to the hospital for treatment of a broken right shoulder and sternum.,1
An employee was salting and shoveling snow when the employee slipped on the ice on the sidewalk and fell breaking an ankle.,1
An employee was clearing a jam on a production line and lacerated his right pinky fingertip.,1
An employee was carrying plywood on the roof when the employee's self-retractable lanyard locked up. The employee lost balance and fell dislocating an ankle.,1
An employee was cleaning a hydraulic press at shift end. The employee reached into a machine opening to retrieve a piece of material and the press platen struck and crushed the employee's hand. The machine was energized at the time.,1
An employee was on a scaffold approximately five feet tall working overhead to cut a hole for an access panel near a roll-up door. The door was energized and bumped the employee as it rolled up. The employee fell and sustained one cracked rib and two broken vertebrae (L1 and L2).,1
An employee was replacing a valve in a process line using a chain fall. The employee's finger was caught between the new valve and the top of the flange crushing it and resulting in a partial amputation.,0
An employee slipped on snow covered ice and fell to the ground. She struck her head and suffered a severe concussion and a sprained left wrist.,1
An employee was clearing a rock from rollers inside a grain flaker. The rock was lodged between the rollers and the employee cut his right middle finger on the access door when he was pulling back on the tool. The laceration and bone injury required amputation of the injured finger.,0
An employee reached in behind the gin press to remove a knot that was causing the press to choke up and amputated the right forearm.,0
"An employee was walking through the parking lot to her car, slipped on ice and fell injuring her pelvis.",1
"On 02/07/2018, an employee tripped over a floor mat and fell resulting in a shoulder injury.",1
"An employee was walking to the car, tripped over a sidewalk curb and fell fracturing the left wrist.",1
"An employee was removing a ceramic nozzle from a packing crate, tripped on the plastic banding material and fell to the mill floor. When the employee fell, the employee's right hand was pinched between the nozzle and the mill floor resulting in amputation of the pinky fingertip.",0
"An employee was prying rubber from a four-roll calender machine when his prying tool and glove were caught in the calender, pulling his hand inside. His right middle finger was amputated before he could get his hand loose. The machine was operating at the time of the incident.",0
"An employee was using a crane to lift a filtration tank filled with sand to the main level of a hydro lab when the tank fell. The employee was struck by the falling tank, an electrical conduit, and a metal pipe, suffering multiple broken ribs, swelling to the right leg, and a crushing injury.",1
An employee was cleaning a parts cage when dust caused him to start coughing and experience pressure in his head. He was hospitalized.,1
"An employee was operating a forklift to load cotton bales onto a cotton bale truck. As he was exiting the warehouse, he hit a hole in the ground, causing the forklift to tip. Thinking the forklift was going to flip over, he tried to jump off and broke his right leg.",1
"An employee was preparing to rinse down a line with a water pressure gun when he had trouble removing the gun's water nozzle. As he attempted to remove the nozzle, the high-pressure water shot into and lacerated the inside of his mouth.",1
"An employee was welding when hot slag dropped into his tool bag, igniting it and causing burns on his back and side.",1
"An employee was changing a propane tank on a forklift. As he was connecting the hose, some fuel leaked onto his right hand (which was gloved), causing cold burns.",1
"An employee walked into a knife, suffering lacerations under the rib cage of her left side.",1
An employee was performing preventive maintenance on a switchgear and received an electrical shock when his hand contacted a live conductor.,1
"An employee was walking and running a crane using a remote control when he tripped over a water hose line that was on the floor and fell onto the remote control's crane box, breaking his sternum.",1
"An employee fell on ice in the parking lot and was injured, requiring hospitalization.",1
"On February 8, 2018, an employee was cleaning out the bed of a die cast machine's C-frame while a die setter was changing the machine's piston. The employee attempted to remove something from the machine just as the die setter activated it. His right ring finger was then caught between the platen and the sleeve ring, amputating his fingertip.",0
"An employee was using a pancake huck tool to remove hucks from a column guide wear plate on a side frame when the hose on the pressure side of the tool burst where he was holding onto it, injecting oil through his glove and into his left hand.",1
"An employee tripped and fell, fracturing her right hip.",1
"An employee slipped and fell on ice in the parking lot while walking to a bus, suffering a broken hip.",1
An employee was doing pushups on the ground when a pickup truck ran over his right hand. He suffered broken bones and a pinky amputation.,1
"An employee was working on a vessel at the dock. He was unlocking a hatch cover and reaching to turn one of the locking mechanisms when his foot slipped and he fell, fracturing his right foot. He was hospitalized and had surgery.",1
"An employee slipped and fell on ice on a sidewalk, suffering a broken pelvis and arm.",1
"An employee was using a circular saw to cut a door when the saw kicked back and caught the employee's left pinky finger, resulting in an amputation.",0
"An employee had entered a belt conveyor motor room to troubleshoot it when his right jacket sleeve was caught on the conveyor belt, pulling his arm into and between the conveyor belt and drum tensioner. He suffered a broken hand, wrist, and arm and a dislocated elbow, requiring hospitalization.",1
"An employee was blowing something out of an edge bander when the employee's left hand contacted the saw blade, amputating the middle and index fingers.",0
An employee was folding cartons to put them on a conveyor when his right middle and ring fingers were caught and amputated in a belt and pulley. The belt and pulley were unguarded at the time.,0
"On February 8, 2018, an employee was removing operating room lights from spindles and replacing them. As he reached up to grab one, the knuckle where the light bends snapped on his left index finger, resulting in a partial amputation below the second knuckle.",0
"An employee was operating a skinner machine and guiding hams to allow the tooth roll to grab and pull the hams into the skinning blade when a ham shifted, causing his smock sleeve and skinner glove to become caught in the tooth roll/skinning blade. He suffered an acute soft tissue injury of the right arm.",1
A employee suffered a T6 vertebra fracture after slipping on ice and falling down residential porch steps.,1
An employee was working from the top of a tank on a truck and was opening a dome lid to relieve pressure when he slipped and fell approximately 7 feet to a concrete surface. He suffered a spinal injury and was hospitalized.,1
"An employee was helping to move a beam when the employee lost footing, slipped, and fell, twisting/breaking an ankle and tearing ligaments. The employee was hospitalized.",1
An employee slipped on ice and fell in the parking lot resulting in a fractured ankle that required surgery.,1
An employee was standing on a 5-gallon bucket when he stepped down onto an upright welding rod and impaled his right foot.,1
An employee was testing a food metal detector when his hand entered the point of operation on the machine. His right middle finger was caught and amputated in the machine.,0
"On February 8, 2018, an employee was adjusting a tube cutting machine and amputated the pinky finger and crushed the ring finger.",0
"An employee had rigged a plate to pick up and set it into place. He had hooked the plate up with a chain and was standing near it when the plate came loose and struck him, breaking his left leg and injuring his back.",1
"An employee walked into a co-worker's cubicle to answer the phone. To access the phone, the employee positioned herself between the cubicle desk and chair. This position placed the employee's feet under the desk. As she exited the cubicle, her left foot became entangled with a satchel strap that was beneath the cubicle desk. She then tripped and fell to the floor, suffering a right hip femoral fracture.",1
A security officer was pushed to the ground by a patient resulting in a left ankle fracture.,1
"An employee and a coworker were removing a 2,500-pound block of concrete using a front-end loader that was hooked to a crane. The coworker was driving the loader while the employee guided the concrete when a corner of the block hit another block and started spinning around. The employee was attempting to stop it from spinning around when the chain came undone, allowing the concrete to fall on and fracture his right leg.",1
"An employee was struck by a tree while felling trees, suffering fractures.",1
"An employee was standing next to carry deck equipment when an outrigger set down on the employee's right foot, fracturing a metatarsal.",1
"An employee was walking through an aisle when he inadvertently pressed a battery powered pallet jack handle. The pallet jack activated, and his foot was caught between the pallet jack and stock, fracturing his lower leg. He was hospitalized.",1
"An employee boxed product in the fabrication packaging area and was picking up trash at the end of her shift. She was standing on a wet grate, so she put cardboard on top of it. The cardboard shifted, so she bent down to pick it up. At that point, her fingers were caught underneath the return line of a conveyor. Her left third and fourth fingertips were partially amputated.",1
An employee suffered a broken leg when he was struck by a case of material that tipped over after it was struck by a lift truck.,1
An employee was feeding film through a machine after the film broke. The machine unexpectedly energized and fractured the employee's left hand.,1
"On February 6, 2018, an employee fell to the ground while exiting his truck, breaking his left femur and requiring hospitalization.",1
"An employee was washing dishes when he fell to the floor and fractured his right leg, requiring hospitalization. Non-slip shoes were not worn at the time.",1
"An employee was moving a 23,000-pound platen using an overhead crane when the employee's arm was pinned between the moving platen and a second platen sitting on the floor. The employee suffered a vascular injury to the arm, requiring hospitalization and surgery.",1
"An employee was climbing into a truck and lost contact with the handle and fell backwards suffering a broken vertebra, bruising, and a head injury.",1
"An employee was testing a snowboard feature for a special event when the employee fell off the feature. The employee suffered a broken nose, shoulder, and ankle, requiring hospitalization.",1
"On 2/09/2018, at approximately 7:45 a.m., an employee was moving a plastic pallet to the dock area when he lost his balance and fell to the floor, hitting and breaking his right hip.",1
"An employee was climbing down a cage frame after repairing a feed line motor when he lost his footing and fell to the floor, landing on his head and back. He suffered a skull fracture and vertebra fracture.",1
"An employee was pushing a cart with a mold on it when the mold shifted. The employee's right hand was pinched between the cart handle and the mold, resulting in a right thumb tip amputation.",0
"An employee was moving boat motors when one of the motors fell on his right hand, fracturing his pinky finger and lacerating/damaging the nailbed.",1
"An employee was aligning a steel tube on a conveyor when another tube bumped into the tube he was holding, causing his finger to become caught between the tube and lifting arm of the conveyor. His left ring finger was crushed, resulting in an amputation.",1
"An employee was helping to move a scaffolding platform when his left middle finger was caught between two pieces of scaffolding, resulting in an amputation.",0
An employee was transporting a pallet of plastic with a forklift when a roll of plastic fell off. The employee stopped the forklift and was trying to stop the plastic from rolling away when his left leg was pinned between the roll of plastic and a metal post resulting in a fractured leg.,1
"An employee's left hand was caught in a labeling machine, crushing one finger and amputating a fingertip.",0
"An employee was helping a table saw operator cut 6-inch blocks when the employee's right hand entered the cutting area and contacted the blade, amputating the thumb below the nail. The saw was guarded at the time.",1
"An employee was cutting a concrete pile when a previously cut pile of concrete fell on the employee. The employee was hospitalized with broken ribs, a broken left arm, and possible lung damage.",1
"An employee was moving the bridle from a pumping unit when a brake gave way, catching the employee's right pinky. The employee's right pinky fingertip was amputated.",0
An employee was manually moving a pump jack to a neutral position so he could grease the gears when his right index and middle fingers were pinched between the belt and a pulley. His right index fingertip was amputated above the first knuckle and his middle fingertip was crushed.,1
"An employee tripped over a chair in the school lunchroom and fell to the floor, breaking her shoulder. She required hospitalization and surgery.",1
"An employee was exiting his truck when he was struck by an oncoming vehicle. He was knocked to the ground and sustained a fractured right fibula, requiring hospitalization.",1
"An employee was coming down a four-step rolling mobile ladder while carrying a bundle of cardboard sleeves when she tripped and fell approximately 2 feet to the floor. She broke her right ankle, requiring hospitalization and surgery.",1
"An employee had delivered a package to a home and was returning to his vehicle when he slipped on ice and fell, suffering a crushed vertebra.",1
"An employee was responding to a blue code when her feet became tangled, causing her to fall to the floor and fracture her hip.",1
"An employee was emptying a filter pod at the flare stack when a small flame came out of the top of the flare stack, landed in the condensate, and burned him. He suffered second degree burns to the hands, stomach, and calves, requiring hospitalization.",1
"An employee was loading a pallet assembly machine when a board fell onto the employee's right index finger, opening an old scar and resulting in a partial amputation.",0
An employee was working in a power room making temporary power connections on a 480V box when an arc flash occurred. The employee suffered second and third degree burns over 60% of his body.,1
"An employee climbed up onto a press, lost his grip, and fell while pulling a piece of cotton from the press breaking both wrists.",1
"Crew members were attempting to clear a section of ice from a 300' section of 4"" poly pipe when one employee was struck in the left leg by a 4"" piece of poly pipe. The employee's left leg broke between the ankle and knee.",1
"An employee was repairing the broken bucket of a conveyor when the machine moved, lacerating the employee's head and fracturing his jaw. The employee was hospitalized.",1
"An employee was delivering mail via an automobile. As the employee was closing a mailbox with her right index finger, the vehicle began to slide due to snow resulting in amputation of her right index finger.",0
An employee was closing the main cabin door of the plane and caught the ring finger between the door frame and the door resulting in a partial amputation.,0
"An employee was standing on the second step of a portable step ladder while removing wall tiles and fell to the concrete slab, fracturing the right femur.",1
An employee turned on a vacuum cleaner to vacuum a second floor carpet and received an electrical shock in his foot that traveled up his leg.,1
An employee was cutting flower stems using a manual guillotine cutter and amputated the left thumb between the nail and first knuckle.,0
The injured employee was clearing a paper jam in a machine and had his right hand in the shear area when another employee jogged the machine resulting in amputation of the injured employee's index and middle fingertips and the tip of the nail on the thumb of the right hand.,0
"An employee was attempting to relocate a 10-inch flange by hand. During the relocation, the flange started to roll onto its side and the employee attempted to control the flange catching the employee's right middle finger between the rolling flange and another flange on the pallet resulting in a fingertip amputation.",0
An employee was on a 7-foot step ladder installing ceiling light fixtures. The employee contacted energized wiring with wire strippers and fell from the ladder. The employee was hospitalized for head trauma and broken ribs.,1
An employee was changing the blade on a food processor when it turned on and amputated the employee's left index finger.,1
"An employee was clearing a jam on a pasting line. While trying to clear the jam, the employee jogged the machine into reverse. As a result, his gloved left hand was pulled into the machine. The employee then reversed direction of the machine to ""forward"" and jogged the machine to free his hand resulting in amputation of the ring finger.",1
"An employee was walking on the pool deck, slipped and fell resulting in a broken rib.",1
An employee slipped on ice while walking up a driveway to deliver mail and fell resulting in a broken and dislocated right ankle.,1
An employee was working on the roof and fell through an opening in the roof resulting in a broken wrist and three broken ribs.,1
An employee was lifting pipe out of the wrangler. The pipe slipped out of the elevator and struck the employee in the face and shoulder. The employee was knocked unconscious.,1
An employee was driving a golf cart and struck a curb. The employee then fell from the cart and fractured a knee and elbow.,1
"An employee was exiting the cooler room, tripped on a bun tray on the floor and fell resulting in a back injury that required surgery and hospitalization.",1
An employee was attacked by a temporary employee resulting in a neck injury.,1
An employee tripped over a walker and fell fracturing her hip. The employee was hospitalized.,1
An employee was adjusting the drill and mash machine to address a malfunction. The machine activated and caught his left middle finger resulting in a fingertip amputation.,1
An employee was selling memberships at a home and garden show. As she was walking to a vendor booth she tripped on the lip of a display riser and fell injuring her left knee and right arm.,1
"An employee's arm entered the running ribbon blender resulting in a broken wrist, a broken arm bone and tissue damage.",1
"An employee was inspecting a roof for leaks. As he was accessing the ladder to get off the roof, he fell approximately 14 feet resulting in a fractured L2 vertebra.",1
An employee was pulling a stack of pallets from a pallet stacker to the end of the outfeed. Another stack of pallets was ejected from the stacker and pinned his right hand between the two stacks.,1
An employee was driving a snowmobile and lost control on soft snow. The snowmobile overturned and struck a tree. The employee was hospitalized for a scapula fracture and broken ribs.,1
"An employee was walking through the warehouse, tripped over a box and fell breaking a femur. The employee was hospitalized.",1
"An employee was on a barge positioning the barge cover that was being placed by the ship's gear crane. The cover was not straight so the employee tried to straighten it and was struck from the mid-chest upward by the barge cover. The employee sustained a right anterior fracture of the first and second ribs, a left mandibular fracture, left hyoid fracture, bruising to the left side of the neck and a small pneumothorax.",1
An employee slipped and fell while walking into the building resulting in a head and neck injury.,1
"An employee was clearing a clog in the air rotary. The paddles within the air rotary energized and began to rotate. As the paddles rotated, they pinched the tip of the employee's right ring finger resulting in a fingertip amputation.",0
An employee was offloading a scissor lift from a truck to the company yard when the lift went off the ramp and tipped over onto its side on the ground. The employee sustained a broken hip.,1
"An employee was loading a dumpster into the rear loading garbage truck. A bag of trash fell from the dumpster. As the employee put his hand over his head to block the trash, he placed his hand in a pinch point and inadvertently activated the winch of the truck, resulting in compound fractures to his left hand.",1
An employee had a bottle of drinking water sitting next to a bottle of odor eliminator. The employee grabbed the bottle of odor eliminator and drank that instead of the water. The bottle was not labeled.,1
"An employee was packing boxes and tried to catch a falling box. Afterwards, the employee felt shortness of breath. The employee was hospitalized for a lung injury.",1
An employee slipped on ice walking outside the north exit and fell resulting in a broken patella and hospitalization.,1
"An employee was walking towards the entrance from the parking lot prior to starting work, slipped on ice that had formed overnight, and fell resulting in a concussion and bleeding on the brain.",1
An employee was clearing a clog from a dishwasher by using his mouth to blow into the tube and swallowed some corrosive detergent. The employee was hospitalized for burns to the tongue and throat.,1
An employee was struck by a reversing forklift.,1
An employee was riding a continuous belt manlift down to the ground floor where he lost his footing and his leg became caught in the landing/step off at the ground floor. He suffered a laceration to the back of his right leg and his head.,1
An employee was retrieving her purse to go home. A plastic liner was sticking out from an empty yarn cage and the employee tripped over the plastic liner and fell fracturing her left femur and patella.,1
"An employee was walking out of the facility, stepped off the curb, and onto a patch of ice. The employee slipped and fell fracturing a hip.",1
An employee slipped on ice and fell in the parking lot fracturing her right hip.,1
An employee was walking into the dog house to warm up and closed the door on her hand resulting in a fractured right thumb.,1
"An employee was stepping off a 4-step ladder, missed the bottom step and fell resulting in a head injury.",1
"An employee was adjusting the coolant hose on the vertical band saw when the coolant hose came off. As he reached for hose, his glove got caught on the blade, resulting in amputation of the right index finger.",0
"There was an overflow of water in the FT containment area causing an empty tank to float in the containment area. The overflowing water caused the tank to get pinned against a walkway. A waste treatment tech was attempting to dislodge the tank with a steel bar used for breaking up concrete and pinched his fingers between the steel bar and the tank. When he began using the bar to un-wedge the tank, the tank suddenly came loose, rolled up his right index and middle fingers and pinned them between the tank and the bar. The upward motion of the tank amputated the tip of his index finger. His middle finger was broken.",0
An employee was placing a piece of metal in the press brake and caught his left ring and middle fingers in the press. Both fingertips were surgically amputated.,1
An employee was called to fix a pallet that was going to fall and as she looked up to the third level the pallet fell on her injuring her lower right leg.,1
"An employee was cleaning resin from a surface of a 16"" globe valve and valve body. The globe valve closed and severed three fingers on the employee's right hand.",0
"An employee was closing the rolling door of a trailer, slipped on the icy step bar and fell injuring the left pinky finger. The finger was amputated at the hospital.",0
An employee was entering a restroom when she slipped on the wet floor and fell. The employee's left side struck a metal trash can as she was falling. She suffered fractured ribs and was admitted to the hospital for her injuries.,1
An employee was grinding on a metal part when the grinding wheel broke during use and a piece of the wheel struck the employee's forehead. The employee was hospitalized for a large laceration to the forehead and other head trauma.,1
An employee was lighting the oven and suffered flash burns to the upper extremities.,1
An employee fell approximately 18 feet from an extension ladder and was hospitalized for broken bones that will require surgery.,1
"An employee was walking back to the truck, slipped on the ice and fell onto his right hip cracking the pelvis.",1
"An employee was cutting a section of a tree trunk with a chainsaw. As the employee finished the cut, the section of the tree fell and struck the employee resulting in a broken pelvis and internal injuries.",1
An employee fell approximately three feet from a scaffold resulting in a broken arm and a possible shattered elbow.,1
"On 02/12/2018, an employee who was ""riding the side of the belt"" with a package, lost their balance after the package struck a pole on the side of the conveyor belt and fell from a two foot raised platform onto the concrete below resulting in a fractured left wrist.",1
An employee received an electric shock on his right hand while he was plugging an extension cord to a grinder machine and the extension cord contacted the wet floor. The employee was hospitalized.,1
An employee slipped on ice in the parking lot and fell resulting in a possible broken leg.,1
An employee was installing pipe hanger into the ceiling. The employee was working from a 12-foot step ladder using a full body harness with an MSA beam clamp and self-retracting lifeline attached to a 5-inch I-beam. The anchor point was located approximately 3 to 4 feet to the rear of the employee's position with the employee facing away from the anchor point. The beam clamp and self-retracting lifeline became detached from the 5-inch beam allowing the devices to swing downward towards the employee's position and striking the ladder's lower rung. The worker fell from the ladder landing feet first on the concrete floor below resulting in fractures to both lower extremities.,1
An employee was walking down the hall and fell breaking her femur in two places.,1
"An employee removed a piece of plywood that was covering an HVAC chase hole approximately 2' x 2' in size. Upon removing the plywood from over the hole, the employee turned and stepped into the hole falling 11 feet to the wooden floor below. The employee suffered a broken right forearm, fractured ribs and several fractured vertebrae in his back.",1
"An employee was putting together a large, heavy rack in the garden center. The rack fell over and punctured/injured the employee's left leg. Complications due to infection resulted in amputation of the leg.",0
"An employee was working in the cattle receiving area and caught a finger on his right hand in a cattle pen gate, resulting in amputation at the nail just above the knuckle.",0
An employee exited the vehicle and slipped in mud while walking to the back of the vehicle causing her foot to roll and fracture.,1
"An employee was stocking grocery shelves while standing on a stepstool. As the employee was stepping down from the stepstool, she missed the last step and fell to the ground resulting in a fractured left hip.",1
"An employee was installing bracing on the top of a concrete column form when it fell over. He then fell to the ground, breaking his right foot and requiring hospitalization.",1
"On 2/12/2018, an employee was closing a door when it caught her pinky finger, resulting in an amputation.",0
The employee was running a band saw machine and crushed the tip of the right middle finger in the bar holder when the machine cycled. The bone was exposed and the finger was amputated to just below the nail.,0
An employee was operating a bucket elevator/leg machine and opened a metal cover located at the bottom of the machine. The employee was attempting to remove grain from inside the running machine and amputated the left middle finger and lacerated the ring finger.,1
An employee was assisting a customer offload a delivery of steel from his truck and got his hand caught under the load. The employee sustained a partial amputation to his left ring finger and an avulsion injury to his middle finger.,1
"On February 13, 2018, an employee was clearing a jam on a facial tissue converting machine and suffered a partial amputation of the left index fingertip. The machine was guarded at the time.",0
An employee was grinding while standing on a bakers scaffold and fell off the scaffold fracturing an arm.,1
An employee was taking trash to the dumpster. The wind caught the dumpster door and pinched the employee's finger resulting in a fingertip amputation.,0
An employee was emptying packaging equipment and amputated the right index fingertip.,0
An employee sustained second degree thermal burns to his feet from hot water while cleaning equipment in the facility.,1
An employee tripped over a computer bag laying in an aisle and fell breaking the left ankle.,1
"An employee was inside a ""dry room"" at the press cell area. The room is environmentally controlled and a press is used to make heat pellets from powder. The powder is a flammable solid. The employee was cleaning the powder in the cell area with a broom and scoop and disposing of the powder at the satellite accumulation inside a fire cabinet. It is suspected that static electricity ignited the powder. The resulting fire burned both of the employee's hands.",1
An employee was adjusting a mixing machine and amputated a fingertip on the right hand.,0
"An employee was attempting to cross to the main entrance roof from the 2nd floor hallway to perform pressure wash work. While climbing a railing, the employee fell approximately four feet to the main entrance roof resulting in a right arm and wrist fracture. The employee was admitted to the hospital.",1
"An employee was troubleshooting/changing a belt on an air handling unit in the office area. The machine was shut off. As the employee checked the tension on one belt, the right middle finger contacted the still turning motor and was pulled into the flywheel resulting in a fingertip amputation.",0
An employee was working on a chain on a palletizer conveyor and got his finger caught in the master link resulting in a right middle fingertip amputation.,0
An employee was driving a stand up forklift in the aisle of a warehouse and caught her foot between the forklift and racking resulting in a broken ankle.,1
An employee was feeding plastic into a sealing machine and amputated the right middle and ring fingers.,0
An employee was unlashing containers on a catwalk and fell resulting in a head laceration.,1
An employee was assisting the overhead crane operator to place an empty ladle in a ladle pre-heat station when the employee's right hand was caught in a pinch point resulting in a crushing injury to the hand.,1
An employee was welding steel to a column and suffered an electric shock. The employee's gloves were wet at the time.,1
"On February 13, 2018, an employee was climbing a ladder in order to disconnect a cable television service from the main line. The ladder shifted during the employee's ascent resulting in the employee falling to the ground. The employee was hospitalized with a broken right wrist requiring surgery.",1
The employee was working at a sub-assembly jig that is 66 inches tall and 33 inches wide. The employee was getting up from performing a drilling operation on the underside of the jig. She grabbed onto the jig to assist herself in standing and the jig fell over onto her. The employee sustained subluxation and disruption of the spinolaminar ligament at C-7-T-1 and end plate compression fractures of T-7 through T-1.,1
An employee was cleaning batter from a conveyor hopper and amputated the distal end of the left ring finger when it was caught in a pinch point between the belt and a metal guard on the conveyor. The machine was operating and was not locked out at the time.,0
An employee was placing six foot pieces of dimensional lumber in a notching machine. He made contact with the blade resulting in a broken hand.,1
"An employee was working a welding machine and a part got stuck. The employee reached in with his right hand to loosen the part and braced himself on the machine with his left hand. When the part was loosened, the actuators engaged and clamped down on his left hand amputating the tip of his left middle finger.",0
An employee was entering his truck when he was assaulted with a hammer and robbed. The employee was hospitalized for a concussion.,1
An employee was operating a vacuum/scrubber machine in the cafeteria when he fell and landed on his left arm resulting in a fracture to the left wrist that required hospitalization and surgery.,1
An employee was drilling while conducting a SPT sampling and lacerated his thumb while covering a pinhole leak on the equipment.,1
"An employee was working on the deck of a boat being built. As she was stepping across a gap in the boat deck, she lost her balance and stepped off of the boat. Her left leg was wedged between two structural beams of the boat dolly. She continued to fall (29 inches) onto the floor while her leg remained wedged between the beams resulting in a leg fracture.",1
"On February 13, 2018, an employee was assembling a sand hopper for a customer. The sand hopper was in the upside down position. The employee was attempting to push the framework into position for the lifting lugs and hopper legs and pinched his left pinkie finger between the lifting lug and the post resulting in amputation at the distal joint.",0
An employee was operating a burn table with a pneumatic clamp when the clamp crushed his left index finger resulting in amputation of about 1/3 of the fingertip.,0
An employee's right thumb was crushed by a manhole cover.,1
A student was using a lathe to polish aluminum with sandpaper. The bandage on his right hand got caught in the lathe resulting in amputation of the right index finger at the distal phalanx.,0
An employee was reaching towards a patient to remove a blood pressure cuff and suffered a left shoulder sprain/strain.,1
An employee was setting up the press brake when the machine started amputating the employee's right hand.,1
"An employee was at the front counter and collapsed, hitting her head on the counter resulting in a knot and contusion on the forehead.",1
An employee was cutting branches. He was using a rope to hold the branches. The branch fell and caught the rope fracturing the employee's forearm and lacerating a finger.,1
"On February 13, 2018, at approximately 12:30 p.m., an employee incurred fractured ribs when pinched/crushed by the moving arm of the jig (fixture holding device) that held a large sheet of acrylic material during the foam insertion process.",1
"An employee was loading frozen chubs (tubes of meat) into the hydrauflaker. As he was trying to manipulate the chub around, his left ring finger was caught between the chub and ram (pusher) as it was returning to the home position. The left ring finger was pinched and the muscle on the finger was amputated.",1
An employee was climbing a utility pole when the pole and the employee fell over. The employee suffered broken ribs.,1
An employee was drilling with a hand held hammer drill. A second employee grabbed the bit to straighten it and their glove was caught on the drill bit dislocating three fingers.,1
An employee had started to move the rail car and was climbing the car to set the brake when the employee's foot slipped off the ladder resulting in amputation of the right foot.,0
An employee fell 8 feet while climbing down the ladder on a concrete truck. The employee sustained neck and back trauma.,1
An employee was clearing a jammed piece of wood from the 4-way splitter by pushing the jammed wood with another piece of wood. When the jammed wood was pushed free the 4-way splitter ram released and came forward striking and amputating the employee's left thumb at the knuckle.,0
An employee was going from one area of the plant to another and attempted to cross the roller conveyor when the employee lost balance and fell. The employee sustained a broken ankle.,1
A temporary employee was checking a groove that was being machined into pipe when the machine started up and amputated the left index finger from the tip to the second knuckle. Cut resistant gloves were worn at the time.,0
An employee conducting pressure washing suffered a laceration to his left foot due to a malfunctioning spray gun.,1
An employee operating a stand-up forklift struck a metallic rack guard with a fork and was ejected from the machine. The employee suffered head and back injuries after striking the concrete floor. The employee was admitted to the hospital.,1
An employee was struck by a hydraulic jack that kicked out from a concrete form and struck him in his ribcage and right elbow. The employee was admitted to the hospital for an open wound fracture to his right elbow.,1
An employee was cleaning underneath a kettle of boiling water when a hose came off the kettle and the boiling water burned the employee's shoulder and left arm.,1
An employee's pinky finger was partially amputated by a new reel string when performing a change up process on a paper machine.,0
An employee fell while trying to get onto a ladder from the roof shortly after removing fall protection. The employee sustained a broken left leg.,1
An employee was webbing up a press and standing between two units when she contacted her right leg against a small step ladder. The employee felt a pop in her left leg and sustained a broken left femur.,1
"An employee suffered a smashed thumb while working to remove a 2"" diameter metal pole from a shear.",1
"On February 14, 2018, around 5:40 a.m., an employee was walking through the plant when a rope from an empty laundry sling tangled around her foot/ankle. The employee bent over attempting to remove the rope from her foot/ankle, lost her balance and fell to the ground. She was hospitalized for a hip fracture.",1
An employee fell from a ladder and fractured the tibia.,1
An employee was standing near a conveyor system wearing metatarsal guarded shoes when his left foot was pulled into the conveyor and his foot and ankle were caught between the conveyor paddle and a riser resulting in his foot and ankle being degloved.,1
An employee was troubleshooting a clogged chip conveyor and amputated (about 1 inch) the right middle finger.,0
An employee was removing a shelf from within a delivery truck. The shelf fell and cut the employee's right foot.,1
An employee was working on an electrical line when he came into contact with a high-voltage wire. The employee was hospitalized for electrical shock and burns.,1
An employee was lifting tarps off the ground and felt a pop. The employee was hospitalized for hernia surgery.,1
An employee was delivering materials to a jobsite. The employee pulled on a piece of wood used to separate loads when the piece gave way. The employee's momentum caused him to fall backwards off the truck bed. The employee suffered head and leg injuries.,1
"An employee was lifting a pipe approximately 36 inches long. The pipe slipped from the crane rigging, contacted the floor first and then contacted the employee's lower shin area of the right leg. The employee suffered a lower leg fracture.",1
"When the rubber was not moving on the mixing machine, an employee crawled into a live conveyor and reached into an automatic mixer that has a ""gripper"" on it. The employee's arm and shoulder were pulled into the 4.5 inch opening and bruised.",1
"An employee was trying to release a pail that was stuck in the labeling machine. When the pail released, the pail and belt pulled the employee's right thumb into the machine, amputating the tip.",0
An employee was unloading a truck with a crane. The material shifted pushing him off the truck. The employee suffered multiple leg fractures.,1
"An employee was trimming hedges using an electric hedge trimmer. While descending the ladder, the employee slipped and severely lacerated his hand between the thumb and index finger.",1
"An employee was standing near the edge of a cantilevered sheet of plywood and when he leaned over, the plywood moved, causing him to fall 38 feet to the ground and fracture both legs.",1
An employee was performing preventative maintenance on a conveyor belt and fell into the conveyor when he lost his balance. The employee suffered a broken left arm.,1
An employee was checking a vibration on the fiberfill machine when his wedding ring was caught on a shaft resulting in amputation of the employee's left ring finger.,1
An employee was driving a delivery truck and the truck got caught on cable. The employee used a ladder to try and free the cable from the truck. When the tension on the cable was released the employee lost his balance and fell to the ground landing on his heels. Both heels were fractured. One of them required surgery.,1
An employee was using a forklift to restack pallets. The employee's left index finger was caught between the lift and pallet as the employee was sliding a pallet off resulting in a partial amputation.,1
An employee was climbing down a ladder inside an oven in order to clean it. The employee slipped and fell 2-5 feet off the ladder resulting in a bulging disc in the neck.,1
An employee was operating a die cutting machine and crushed three fingers.,1
"An employee was loading an axle onto the engine subassembly table. When attempting to align the right side of the axle, a finger was caught between the axle and the axle rest stand resulting in amputation to the distal end of the finger.",0
"On February 15, 2018, at about 1:15 a.m. five employees were transported to the hospital due to breathing problems after chlorine exposure. One employee was hospitalized.",1
An employee suffered a fractured foot when an excavator bucket struck a timber mat pile and the mat struck the employee's foot. The employee was 18 feet away at the time.,1
An employee tripped and fell while walking into the warehouse through an office doorway. The employee fractured her right hip and was hospitalized.,1
An employee was testing electrical cables. An arc flash occurred while the employee was putting rubber boots back on resulting in an electrical burn to the left arm.,1
"An employee was walking across the parking lot, slipped on ice and fell injuring the left knee.",1
An employee was bending a piece of metal in a press brake and pinched fingers between a piece of metal and the outside wall of the press brake. It was used manually and in a semi-automatic phase. The employee sustained a crushed right index fingertip and amputated the left index fingertip.,0
"On February 15, 2018, at approximately 3:00 PM, an employee was standing on a gooseneck trailer unloading material when he lost his balance, falling approximately four feet and landing on the ground on his side. The employee was hospitalized for five fractured ribs.",1
"An employee was retrieving a pallet from the upper shelving of the pallet rack (approximately 40 feet) using a pallet jack. As he raised the pallet, another pallet on the backside of the rack was overlapping and began to tip. As the second pallet tipped forward four wheel rims and the wooden pallet fell from the rack, one of the rims struck the employee's head. The employee sustained bleeding and swelling of the brain.",1
"An employee was running after a child that was running towards a street and slipped in a grassy, muddy area. As she tried to catch herself on a chain link fence, the ring on her left ring finger was caught in the fence resulting in a degloving injury.",1
"An employee was testing the repair on the slide cylinder of a refuse truck by operating the packer panel lever with his left hand. When he engaged the lever, the cylinder linkage malfunctioned and caused the lever to abruptly kick in toward the side wall of the truck body crushing the upper half of the left index finger between the lever and side wall of the truck body resulting in a contusion and fracture.",0
An employee was walking to the company vehicle to retrieve a tool and fell 18 feet through an uncovered 2' x 3' drain inlet resulting in a broken right femur.,1
An employee was sweeping out the back of a 53-foot semi-trailer when his foot slipped on the edge of the trailer and he fell approximately 4 feet to the ground below. The employee sustained a fractured left leg.,1
"An employee was transferring from a platform to a crew boat, fell and fractured the lower left leg.",1
An employee was using a 2x4 to unclog the granulator. The employee's left hand was caught between the 2x4 and the metal feed chute of the granulator when the material began to flow. The employee's hand was broken and required surgery.,1
An employee was preparing items for the fabrication process and caught a finger between the bin that held the parts and the forks of the forklift resulting in an amputation injury.,0
An employee was performing a rip cut on a table saw and amputated two fingers on the right hand. The saw was guarded at the time.,0
An employee was lifting a resident's legs into bed and sustained a lower back injury.,1
Two employees were offloading a truck. The pallet jack fell off the truck to the ground. The employees were setting the pallet jack upright and one employee amputated the right index fingertip when it was caught under the pallet jack forks.,1
An employee was fabricating a frame. The frame was sitting adjacent to a support column for a boom crane. The frame was struck with the crane boom that caused the frame to fall and strike his hand resulting in a broken index finger on the left hand that required surgery.,1
"On February 15, 2018, an employee was removing a hose coupling from a pump after sanitation had been completed. The employee's fingers on the left hand were caught in the pump impeller. The index, middle and ring fingertips were amputated.",0
A temporary employee was cutting open cardboard boxes with a box cutter and cut his lower left arm. The employee was admitted to the hospital due to a deep laceration to the venous artery.,1
An employee's right small fingertip was caught between the tire rim and axle housing resulting in a partial amputation/open fracture to the distal phalanx.,1
An employee was changing liners in the mud pump and got his right index finger smashed between the liner and sledge hammer.,1
"An employee was training another employee to take a water meter reading in the UV building. The employee stepped backwards to allow the trainee to get closer to visually read the meter and tripped over a 1"" air line that had a 3/8"" air hose attached. The employee fell to ground fracturing the right hip.",1
An employee got the right middle finger caught in a running machine while watching a maintenance employee troubleshoot the machine resulting in a fingertip amputation.,0
A crew of four employees was cleaning out storm water sediment traps using a hydraulic pump to remove the water from the gravity well and then a vac truck to remove the sand and other debris caught in the sediment traps (using a cage to surround the manhole while performing the work). The crew had finished cleaning the sediment traps and three of the employees were putting the equipment back in the truck. The injured employee was replacing the manhole cover and fell approximately five feet into the gravity well. The employee sustained broken ribs and was hospitalized.,1
"An employee was cleaning the meat grinding machine. The machine was turned on while the employee's hand was inside resulting in amputation of the right index, middle, ring and pinky fingers at the first knuckle.",0
"An employee was skiing, lost the left ski and struck a tree with their head. The employee sustained three compression fractures in the upper back. The employee was wearing a helmet at the time.",1
An employee was working on a fan when the blade severed their right middle finger at the first knuckle.,0
"An employee was ascending on a scissor lift to transfer insulation material. As the employee was climbing out of the scissor lift to the commercial roof, he fell 20 feet to the ground. The employee was hospitalized for broken ribs, a bruised liver and back pain.",1
An employee slipped on black ice and fell fracturing the left foot.,1
"An employee was looking for her keys. She asked the building engineer to retrieve them from the elevator pit. The engineer stopped the elevator and went to get them. Meanwhile, the employee leaned over and fell into the pit resulting in a fractured left leg and a cut to the right leg.",1
An employee was attacked by a dog while delivering mail. The employee fell to the ground and broke a hip.,1
An employee was cutting balsa wood using a table saw and contacted the saw blade resulting in amputation of the thumb tip.,0
An employee was maneuvering a pipe when the pipe fell on the employee resulting in broken ribs and fractured vertebrae.,1
An employee was moving a rug when she fell forward and sustained a hairline fracture of the right hip.,1
"An employee was cutting steel with a cutting torch when a piece of hot metal fell into their boot, burning the right foot and ankle.",1
An employee was walking down a temporary ramp that was put in place to run wheel barrows. The plywood on the floor began to tilt and the employee jumped from the ramp landing onto a loose brick on the floor. The employee fractured the right heel and left hip.,1
An employee was climbing an extension ladder looking for a pressure washer hose and he fell off the ladder approximately 6 ft to the ground and sustained a fractured skull and a possible brain bleed.,1
"An employee was helping to roll out geotextile material. As the employee was lifting the roll over a wall, it spun and struck the employee's leg fracturing it.",1
An employee was fixing a broken conveyor when their right arm was caught in the conveyor resulting in a fractured forearm.,1
"An employee was cleaning around a 54-inch tall partition wall. The wall fell over and the employee was struck in the back of the leg. The employee sustained a fracture in the lower right leg, which required hospitalization.",1
An employee was using a pocket knife to poke a hole in a jug. The safety latch on the knife was not secured causing the knife to close and lacerate the employee's left index and middle fingers resulting in amputation of the distal portion of the index finger.,0
An employee tripped on a hose at a gas station and sustained a dislocated elbow and a broken arm.,1
While placing the dock plate an employee slipped between the dock and the truck. Skin was removed from the shin and a bone was broken.,1
"Employees were replacing a pump at a gas well site. After set up, the pump jack was not pulling gas from the well. A cable was hooked up to the pump jack to move it slightly. As the cable was pulled, the pump jack tipped over onto an employee breaking the employee's tibia and fibula.",1
Employee was using a pneumatic impact wrench to remove a lug nut from a vehicle and metal debris entered their eye.,1
An employee working at the car wash was struck by a reversing vehicle resulting in a torn ligament in the left leg.,1
An employee walked around a shrink wrapped package/bundle and sustained a severe laceration to the right calf.,1
"During a forging operation, an employee had their left index finger amputated while using a punch press.",0
An employee was found in the warehouse area of the store with an eye contusion/black eye and in a disoriented state. The employee was hospitalized for a skull fracture in two places and swelling.,1
An employee was standing on the rail of the mega mixer. The employee was crossing over the rails and slipped. The employee's right foot was struck by the mega mixer and pinned between the wheel and rail.,1
"An employee was walking from the parking lot to the store to begin work,d slipped on ice that had accumulated on the sidewalk in front of the store, and fell onto the concrete. The employee received a compound fracture to the right leg.",1
"The employee was opening the sliding door to the heat treating building by pulling the handle down, which enables the door to slide on its rollers. The metal sliding door was approximately 22.5 feet in length and 11 feet in height. The employee tried to push the sliding door along its rollers by placing his left hand on the door handle frame. While pushing the sliding door, the unlatched spring-loaded door handle released from its down position, and sprung upward, catching the employee's left pinky finger between the stationary and moving door handle framework resulting in amputation.",0
An employee was climbing out of a truck and slipped. His leg hit a broken part of the truck's bumper causing a severe cut to his right calf. The employee was hospitalized and had surgery.,1
An employee was walking through his department between two trailers to retrieve tools. The employee tripped and fell over a cable that is on a winch to remove trailers from the paint booth. The employee was hospitalized and had surgery for a hip injury.,1
"While unloading steel beams, a beam fell off of the truck and struck an employee's lower leg, breaking it.",1
An employee was stepping out from behind the garbage truck and was struck by a school bus resulting in multiple fractures.,1
An employee was walking in the hallway when 10-15 sheets of drywall fell on him causing a left leg fracture.,1
An employee slipped on snow/ice in the company parking lot and fell breaking the left ankle.,1
An employee was receiving scaffold materials up to the 21st floor via an engineered opening in the scaffold flooring. The employee fell approximately 14 feet through a gap in the scaffold flooring. The employee struck his head in the fall and was hospitalized. The employee was not tied off at the time.,1
"An employee slipped on ice while stepping off the curb to the parking lot, while walking toward their car. The employee fractured her right ankle.",1
"An employee was working from a ladder inside a hole (trench) rubbing the chamfer line on the concrete, removing nails and/or debris, and fell 6 feet, receiving a lower back fracture.",1
An equipment operator was loading a tripod onto a backhoe while standing on the ground. He inadvertently struck a lever with the tripod causing the boom to swing into him and pin him between the boom and stabilizer resulting in fractured ribs and a fractured pelvis.,1
"At approximately 10:30 AM on 02/16/2018, an employee was working with a crew of pipe fitters and plumbers, moving a long steel pipe into position in a designated area. The crew was using a portable lift to move the pipe onto cricket. The pipe spun and struck the employee's left foot resulting in a partial amputation.",1
An employee slipped on a wet floor and fell fracturing the right arm.,1
An employee was walking on a walkway between buildings and brushed up against the guardrail. The railing detached and the employee fell about 22 feet to the ground. The employee also struck an air conditioner on the way down. He was hospitalized with a serious cut to the head and a broken ankle and sternum.,1
An employee fell out of the dump vehicle he was driving and was struck by it resulting in a crushed lower right leg.,1
An employee was being elevated in a scissor lift to install duct work. The employee's left hand was caught between the scissor lift's hand rail and the conduit suspended in the air resulting in a fractured and lacerated hand.,1
"On February 17, 2018, an employee was injured while using a drill press. The drill press was set up with a paddle in lieu of a drill bit. While adjusting the speed of the press with his left hand, his right hand held a tachometer. With the paddle spinning, the shaft bent 90 degrees and contacted the employee's right ring finger, resulting in amputation.",0
"As an employee was descending a 10-foot extension ladder, a gust of wind caused the employee to lose his balance and fall 8 feet, sustaining fractured ribs.",1
An employee was skimming impurities from melt when he lost his footing and fell forward into a pot of molten aluminum. He was burned on the left arm and hand.,1
"Employees were replacing a damaged fabric felt on the paper machine. As the felt was being pulled into position using a new piece of threading rope, the rope broke, wrapped around both of the employee's knees, and the end of the rope struck the back of his right leg causing a deep laceration.",1
"While opening a trail, an employee was skiing and fell. The employee sustained a cracked T3 vertebrae, a fractured T4 vertebrae, and a small brain bleed.",1
"An employee was working on the line, slipped and fell. His hand went into the deep fryer resulting in hot oil burns.",1
An employee was offloading freight onto a conveyor belt. A tote weighing approximately 20 lbs. fell from inside the truck onto the employee's head.,1
"An employee was refinishing a roll of paper in the refinishing area. The employee manually pushed the roll onto the slat conveyor, however the roll continued on, striking a barrier and causing the roll to bounce back to the slat conveyor. The roll then rolled back to the barrier, striking the employee in the left arm and fracturing the ulna.",1
"While taking down a light fixture, an employee fell about 7 feet from an A-frame ladder and broke both heels.",1
"An employee slipped and fell to the ground from the load on a flatbed trailer while trying to tarp the load. He sustained a concussion, fractures to the knee and wrists, and required stitches.",1
An employee was working in the breeding room and was exposed to an elevated level of ammonia from pig waste. The employee was hospitalized for a respiratory system burn.,1
An employee was walking over to check for leaks on a gauge. The employee noticed three lines/hoses had collapsed. The blender was on and when the valve opened 100 pounds of pressure hit the hoses causing them to jump up and strike the employee breaking the right tibia and fibula.,1
"While inspecting a fryer, an employee's sleeve was caught and pulled into the fryer. The employee sustained a broken hand and forearm.",1
An employee sustained a laceration to the right leg above the knee while pressure washing shaker pits with an industrial pressure washer.,1
An employee was attacked and mugged in the parking lot.,1
"On February 18, 2018, an employee bent over to pick up a dime on the floor and lost her balance and fell resulting in a fractured right hip and fractured right elbow.",1
"Employees were hoisting drilling pipe, when the pipe fell, striking the back of an employee who was standing on the rig floor. The employee sustained fractured ribs and vertebrae.",1
"An employee was checking the coolant level in a radiator for one of the rig's generators. When he twisted the radiator cap, the cap came off and he was sprayed with hot coolant resulting in burns to his right arm, shoulder, chest and scapula. Immediately afterward he ran towards the rig manager's trailer and while doing so tripped and fell resulting in a broken right clavicle and cracked scapula.",1
An employee fell off a two-story roof and broke his wrist.,1
"An employee was opening the weather doors at the end of the jet way. The door is held closed by a latch pin and utilizes a hydraulic device to hold the door open during passenger loading/unloading from the aircraft. When the employee released the latch pin, the door swung back, knocking the employee to the floor of the jet way resulting in a back injury.",1
"An employee was climbing a fixed ladder to the roof access hatch and lost their grip and fell to the concrete floor, causing a fracture.",1
"On February 18, 2018, an employee was working from a portable extension ladder that was staged on a slippery surface. The ladder became displaced and the employee fell, resulting in facial fractures.",1
"An employee was helping to unload product that was in coolers from the back of the van. While exiting the back of the van with a cooler in hand, the employee slipped and missed the bumper and fell onto the pavement injuring his ankle and knee.",1
"An employee was putting two pipes together and one of his fingers was caught in a pinch point, resulting in medical amputation of the fingertip down to the bone.",0
"An employee was standing next to a free-standing doorframe when a second employee, who was attempting to run a cable to a spider box along the wall, bumped the doorframe. It fell towards the first employee and knocked him on his back on the cement floor. He was hospitalized with a fractured L1 vertebra.",1
"An employee was escorting a patient to an exit door when the patient punched the employee in the head, causing the employee to fall and hit their head on the floor. The employee suffered a concussion.",1
"An employee was standing on the third rung of a 10-foot step-ladder using a reciprocating saw, fell and fractured an ankle.",1
"While recycling a large trailer, an employee was struck in the head when the 8-foot high side swing door was blown shut by a gust of wind.",1
"An employee was installing pipes for a sprinkler system and started to descend a ladder when it gave way, causing him to fall to the ground.",1
An employee was standing in the parking lot and was struck by a vehicle that was backing up. The employee sustained a concussion.,1
An employee had just finished unloading product from a trailer at a dock when the employee fell backwards off the dock and struck the concrete ground. The employee suffered head and shoulder injuries requiring hospitalization.,1
"An employee was strapping and securing a load on the back of a trailer when he fell off, breaking five ribs.",1
"An employee was operating a reach truck when he believed the brakes were failing and put his foot out to stop the truck. His foot hit racking and was fractured, requiring surgery and hospitalization.",1
An employee was struck by a block that fell from a 600-ton crane when the crane collapsed. The employee sustained multiple fractures to the body.,1
An employee was operating an industrial band saw that is equipped with a hydraulic pipe clamp when his hand was caught between the clamp and the pipe he was cutting. His two left middle fingers were amputated. The band saw was unguarded at the time.,0
An employee was on the third-story balcony of an apartment complex. He was pulling up a 25-foot section of gutter with a rope so that it could be installed. When the employee grabbed the section of gutter the end of it hit a power line. The electricity exited out of the employees left foot causing an exit-wound burn.,1
"An employee was gathering shopping carts in the store parking lot when a customer backed out of a parking space and hit the employee. The employee suffered bruised ribs, a sprained wrist, and a bruised arm.",1
"An employee fell approximately 16 feet from an abutment while wrecking forms, and sustained multiple fractures.",1
An employee suffered a lower leg muscle injury after severe exertion during training.,1
"An employee was opening a delivery truck door when floor joists fell off the truck and struck the employee, causing head and back injuries, as well as a neck fracture.",1
"An employee was removing a small piece of wood that was stuck between the table saw guard and fence. While reaching for the wood, the employee pressed the foot pedal resulting in amputation of the right thumb, index and middle fingers.",1
An employee was changing electrical poles. The employee grabbed the chain to try and move it up on the pole and pinched the left thumb between the pole and chain. The tip of the thumb was crushed and amputated.,0
"An employee was attempting to install ladder clamps to secure an extension ladder in preparation for the work activity and fell approximately 14 feet from the ladder, resulting in multiple hip fractures and a shoulder injury.",1
An employee reached into a press machine and suffered an amputation injury to the index finger.,0
"On February 19, 2018, an employee was getting up from her desk when she tripped over an ethernet cable. She fell and suffered bilateral shoulder fractures, requiring hospitalization.",1
"An employee was rigging a section of pipe into an upper-level steel structure when the pipes shifted, striking and crushing the employee's leg.",1
An employee was walking down the hallway and fell breaking a kneecap.,1
"An employee was walking on a flatbed tractor trailer while loading equipment. He was checking to make sure chains were not trapped between the load and dunnage when he tripped over the dunnage and fell 57.5 inches off the trailer to the concrete below, fracturing his pelvis.",1
"An employee climbed up an extension ladder to ensure it was setup correctly. The employee fell 23 feet, sustaining back injuries and broken ribs.",1
An employee was getting a part off of a shelf and fell off the ladder resulting in a possible concussion.,1
An employee sustained a partial finger amputation when moving the guard on a circular saw.,0
"An employee was pushing a lorry tank on a monorail when the monorail broke, causing the lorry tank to fall over and break the employee's leg.",1
"An employee was squatting while cleaning a taco fryer when she lost her balance and reached to catch herself. Her left hand was then caught in a sprocket, amputating her middle fingertip.",0
"Employees were transporting hot water in a large plastic garbage bin from a kettle to a sink to wash dishes, because the water heater was not working, when the bin tipped over. The hot water splashed the injured employee on the back of the legs, calves, and feet, causing second degree burns.",1
"An employee's right foot was run over by a forklift that was backing up, requiring surgery.",1
"On February 19, 2018, an employee slipped on ice in the parking lot and fell, fracturing her right femoral hip and requiring hospitalization.",1
"An employee was operating a rubber milling/mixing machine when his left hand became caught in the mill. He was able to remove it, but the skin was separated from his hand, requiring hospitalization and surgery.",1
"An employee was struck on the head by falling sheet metal duct work during demolition operations, suffering a concussion.",1
An employee was unloading a truck when he began feeling sick. He was taken to the hospital where he suffered a heart attack.,1
"An employee was assembling a scaffold when it tipped over, causing the employee to fall approximately 8 feet sustaining bruising and contusions to the head and ribs.",1
An employee was feeding a 4x8 into a laminating machine when the employee's foot was caught between the machine platform and the feed table resulting in a small toe injury.,1
"An employee was operating a saw when the tool's fixed clamp closed on his right hand, resulting in a pinky finger amputation.",0
"An employee was transferring a 55-gallon drum with an ergonomic drive lift. Her body was leaning to the left to view the drum placement when her right thumb became caught/crushed in the lift device. She released the drum, which freed her thumb.",1
"An employee was using a table saw to cut wood stakes. The blade of the table saw pops up from below the table surface when a two-hand control is actuated and retracts below the table surface once the controls are released. However, the blade did not fully retract. When the employee grabbed the cut wood, his right index finger contacted the blade, suffering a partial amputation.",0
An employee was hospitalized after being assaulted by a patient.,1
"An employee was operating a lathe when the employee's left arm was caught in the lathe, resulting in a left arm amputation.",1
"An employee was walking to her car when she slipped on ice and fell in the parking lot, breaking her right femur.",1
"An employee was troubleshooting a mobile power unit compressor when his hand entered the running machine, breaking two fingers.",1
"An employee was unloading two bundles of trusses from a powered industrial truck when the second bundle fell off the forks and caught the employee's leg, fracturing it.",1
"An employee and a coworker were involved in a fight. The coworker cut the employee with a sharp object, lacerating his stomach, chest, back, and arm. He was hospitalized and had surgery.",1
"On February 20, 2018, at approximately 8:00 AM, an employee was sanding a vehicle's A/C belt when a pulley caught his glove and pulled his finger between the two, resulting in a right index finger amputation. The vehicle was running at the time.",1
"An employee was pushing a cart with an equipment body into a paint booth when the wheel of the cart caught a raised grate in the paint booth floor. The raised grate caused the equipment body to roll onto the employee's hands, causing internal crushing injuries on the right hand and severe lacerations on the left hand. The employee was hospitalized.",1
"An employee was descending a  ladder when he fell approximately 5 feet to the ground, landing on and breaking his left arm.",1
"An employee was helping a coworker rearrange a crate (weighing 706 pounds) with an electric pallet jack. He was standing at the end of the forks and leaned the wooden crate to get it off the forks. His coworker then lowered the forks, which bumped the ground, and the crate tipped. He tried to stop the crate from falling, but it fell on his right leg, fracturing it between the knee and foot, and requiring hospitalization.",1
"While surveying a construction site, an employee tripped over a wooden stake and fell to the ground, breaking the left hip. The employee was hospitalized.",1
"An employee was walking back to the trailer after conducting maintenance outside when he slipped on ice and fell to the ground, fracturing his left hip.",1
"An employee was washing building windows when the clamp supporting him slipped off the parapet wall. He then fell approximately 36 to 42 feet, striking a tree and then landing on the grass lawn below. He broke his right arm, six right-side ribs, and one vertebra, requiring hospitalization and surgery. The clamp was not tied back to an independent life line at the time of the incident.",1
"An employee was getting the loop out of a drilling line at a spool when the driller started the spool, catching the employee's right hand between the line and spool. The employee's right ring and index fingers were amputated.",0
"An employee was connecting a converter dolly to a trailer when the dolly unexpectedly released itself, crushing the employee's finger against the bottom of the trailer.",1
"An employee was operating a wire brush handheld grinder to smooth out concrete. The grinder hit the side of a stair and kicked back, hitting the employee's left leg and causing a 2"" deep and 4"" wide laceration on his thigh.",1
"An employee was manually lifting a gear from the rotary die cutter when the gear slipped, pinning and crushing the employee's middle fingertip and resulting in an amputation.",0
An employee was processing meat when another employee stabbed him in the neck with a knife. He was hospitalized and had surgery.,1
"While fueling a company car, an employee slipped on ice and fell to the concrete floor, suffering a broken hip.",1
The injured employee was adjusting a die when a second employee started the machine. The injured employee suffered a partial amputation of the thumb.,1
"An employee's hand struck a grinding wheel, suffering a fractured fingertip, a deep laceration to the index finger, and an abrasion on the middle finger. The employee was hospitalized.",1
"An employee was driving a mail delivery truck when a vape cigarette in his pocket burned his leg, requiring hospitalization.",1
"An employee was on the ground level manually lifting the dock plate to sit on a trailer. The dock leveler was a mechanical chain driven dock leveler that would not raise completely due to a mechanical issue with the tensioner. As the employee lifted the dock plate, he was pinned between the dock plate and the trailer resulting in broken ribs and a lacerated spleen.",1
"An employee was doing routine minor maintenance on an automatic flagrod machine's gas meter when he noticed a flagrod was out of place in the machine's swage former. He was trying to push it into place when the head of the swage former came down on his hand, fracturing his hand, thumb, and middle finger.",1
"An employee was standing on a couch dusting a picture frame. When she moved, her shoe was caught on a pillow, causing her to fall to the concrete floor. She suffered a left wrist fracture and left wrist/hand contusions.",1
"An employee was climbing down a scaffold ladder when the employee's right foot slipped from the  third rung from the bottom. The employee then fell to the ground, fracturing the left leg and requiring hospitalization.",1
"An employee was using a 7.5-ton overhead crane to move a suspended load while holding onto the load with his right hand. The load weight plate (with his hand on it) then struck the back of a forklift, and his right index and middle fingers were lacerated. He was hospitalized.",1
"An employee operating a motorized pallet jack struck a support beam. A piece of protruding metal on the support beam caused a severe laceration to the employee's right calf, requiring hospitalization.",1
"While placing boxes onto a loading dock, an employee fell approximately 5 feet off the dock to the ground, suffering multiple pelvic fractures.",1
"On February 21, 2018, an employee was using construction equipment and a tow strap to pull a damaged wooden pallet of product. The rigging gave way, allowing a metal bar that the strap was looped around to strike and fracture the employee's knee, requiring surgery.",1
"While installing screws on a sheet metal roof, an employee slipped off the roof and fell to the frozen ground, fracturing both feet.",1
"While walking down a flight of steps during the rain, an employee tripped on the last step and fell to a concrete landing, breaking the left ankle.",1
"An employee was operating a pallet rider powered industrial truck in an aisle. When he applied the brakes, the pallet rider skidded and his foot was pinned between the side of the pallet rider and the guardrail for some racks. He had multiple toes amputated on his left foot.",0
"An employee fell off the back of a truck body and broke a leg, requiring hospitalization.",1
An employee was helping to change the bucket on a skid steer when it fell off the skid steer and onto the employee. The employee suffered a broken ankle.,1
"An employee was standing on the platform of a stand-up forklift when he passed out, fell off, and hit his head on the floor. He suffered a cut and contusion to the back of the head and was hospitalized with internal bleeding and a blood clot on the brain.",1
"An employee was driving a side loader (PIV) to retrieve steel orders when the brakes went out. The employee dismounted from the side loader and was pinned between it and a column, breaking a leg.",1
An employee was working from a ladder about 8 feet high and fell fracturing a leg.,1
An employee was pinned between a bollard and a car that another associate was driving into the shop. The pinned employee suffered a fingertip amputation and the remainder of the finger was crushed.,0
"An employee was pouring sows (molten metal) into a mold when the metal blew out, resulting in burns to the neck, chin, and hands.",1
"An employee was cleaning a heart and liver machine and raised a cover to remove chicken parts. His right hand contacted the moving machine parts, resulting in an open fracture to the third finger. The machine was not shut down at the time.",1
"An employee was driving a standup forklift and dismounting from the back of it when the heel of his boot was caught underneath the forklift, cutting his left heel severely. The forklift had not come to a complete stop at the time.",1
"An employee was using a saw to cut wood when his left hand contacted the running blade, cutting his ring finger and resulting in an amputation.",1
"An employee was unloading bales of straw from the back of a truck when he lost his footing and fell head first onto the asphalt, injuring his head.",1
"An employee was working on revolving doors on a rolling machine when his left hand entered the pinch point between the machine rollers, crushing his hand and fingers. The pinch point was not guarded at the time.",1
"An employee was attempting to drive out an insert in a die with a sledge hammer. He missed the insert while swinging the sledge hammer, and his left index finger was then caught between the sledge hammer handle and die, suffering a fracture and partial amputation.",1
"On February 21, 2018, an employee was walking on the sidewalk when she stepped on a small rock, causing her ankle to turn awkwardly. She was hospitalized with an ankle injury.",1
"An employee was pulling an engine block out of a wash tank by hand when the employee's left thumb was caught between the engine block and a non-powered roller, resulting in an amputation.",0
"An employee was operating a forklift and made a sharp turn. The employee's left forearm was then caught between the forklift and an industrial shelving system (rack), fracturing the left radius and ulna bones.",1
"An employee was closing a chain valve when part of the valve fell off and struck his head. He then fell down a set of stairs, lacerating his face, fracturing his C7 vertebra, and fracturing his ribs.",1
An employee was attempting to clean a clog out of a spray fire proofing hose when fire proofing and accelerant released under pressure and entered his eye.,1
"An employee was helping to remove a tote filled with ink when the tote contacted his left hand and pinched his finger between it and a metal frame, amputating his fingertip.",0
An employee was removing the fourth stud on a four-hole bolt pattern to separate two vertical sections of pipe when the employee's finger was caught between the flange of the falling lower section of pipe and an adjacent pipe flange. The employee suffered an amputation of the fourth finger's distal phalanx.,0
An employee was handing a bag of landscaping debris to a second employee when he felt a sharp pain in his lower back and shortly thereafter could not move. He was hospitalized with a muscle strain/pull.,1
"An employee was removing forms inside an excavation around the concrete foundation of a residential home. 
The excavated vertical wall caved in, trapping the employee. The employee sustained a concussion and was hospitalized. Rain was a contributing factor.",1
"At approximately 9:45 a.m., on 2/21/2018, an employee was performing maintenance on a press. The machine was properly locked/tagged out and he was wearing all assigned PPE. The employee was using a pry bar to help remove a component of the press. As he was pressing on the pry bar, it slipped, and his left-hand pinky finger was then smashed between the pry bar and the edge of the mold he was working on, resulting in a partial pinky finger amputation.",0
An employee experienced muscle pain while running and was hospitalized with muscle damage.,1
"An employee was adding oil to a fryer from a large pan when the pan slipped and spilled the oil onto the ground. The employee slipped in the hot oil and fell on his back, suffering severe burns to his back and the back of his legs.",1
"An employee was climbing a 24-foot extension ladder to access a roof when he mis-stepped and fell approximately 16 feet to the ground, breaking his lower right leg.",1
An employee was working on the roof. A piece of metal roofing twisted and caused the employee to fall 8 ft. to the ground. The employee sustained a fractured hip and three broken ribs.,1
"An employee fell down while walking and fractured her right wrist, requiring hospitalization.",1
"An employee was standing in an area where paint was stored, when a flash fire occurred. The employee suffered flash burns to her torso, arms, legs, and cheeks.",1
"An employee was walking down the hallway, tripped and fell resulting in a dislocated and broken left elbow.",1
"An employee was using a panel saw to cut a piece of raw walnut wood when his left arm went into the blade, partially amputating it.",1
"An employee was hit from behind by a skier and fell to the snow-covered ground, hitting his head.",1
"An employee was walking down stairs when he lost balance, fell, and broke his collarbone.",1
An employee was preparing an energetic mixture when the mixture detonated causing burns and lacerations to the employee's arms and stomach region.,1
"On February 21, 2018, an employee was attempting to close the valve on a milk tanker trailer when pressure in the trailer pulled his right middle finger between the valve and the trailer, pinching it and resulting in an amputation.",0
"An employee was descending stairs from a tank battery, slipped on an icy step and fell about halfway down the stairs, fracturing the left fibula.",1
An employee was unscrewing track studs from the ceiling while standing on a Bakers scaffold. The scaffold rolled and the employee fell to the concrete ground below resulting in a concussion and a dislocated shoulder.,1
"An employee was feeding material into a 14-inch mill (also called calendar) with both hands when the employee's left hand was pulled into the mill, pinching off the fingertips. The employee also suffered a broken wrist and forearm, requiring hospitalization.",1
"An employee was using a tractor tug to move equipment. The employee dismounted the tug to hook up a bobtail cargo truck. When he was between the tug and the cargo truck, the tug shifter popped out of neutral, allowing the tug to run into and pin the employee, causing deep lacerations to both of his shins. He was hospitalized. The tug was running, and the shifter was not all the way in neutral at the time of the incident.",1
An employee was helping a saw operator cut frozen beef. The employee was placing a block of meat on the saw when it amputated the employee's left index finger.,0
An employee sustained an amputation injury when his finger became caught between a fork of a forklift and the garbage dumpster.,0
"Three employees nippled up a blowout preventer's operation while standing in ankle-deep water that had cement residue in it. Later, one of the employee's suffered first, second, and third degree burns to his feet, requiring hospitalization. Rubber boots were not worn at the time of the incident.",1
An employee tripped over a pillow and fell to the floor fracturing her right hip.,1
"When leaving work, an employee fell on ice, resulting in a hospitalization.",1
"An employee was trying out new tree climbing gear. While repelling down from the tree, the employee fell approximately 20 feet to the ground. The employee was hospitalized with a compound fracture to the right wrist and a bruised/fractured pelvis.",1
An employee was spreading roofing cement and fell 20 feet fracturing his femur.,1
"While prepping the winder on the SMS 2 machine, an employee's finger was caught between a non-powered tool and the machine's guard. The tip of the left pinkie finger was amputated.",0
"An employee was running to his car, stumbled and fell falling to the cement and breaking the right hip.",1
An employee was injured while operating a powered industrial vehicle (PIV) to load a truck.,1
An employee's glove got caught in the belt drive of the chip conveyor injuring the employee's right middle finger. The fingertip was surgically amputated.,0
An employee slipped and fell on the ice in the parking lot during an ongoing freezing rain. The employee was hospitalized for treatment of torn ligaments and tendons in the knee.,1
"An employee was un-tensioning a chain that was used to secure a crane counterweight to a trailer deck when the chain rolled and pinched the employee's left index fingertip between it and the counterweight. The employee's nailbed and ligament were damaged, requiring surgery.",1
An employee was attempting to blow down a pipeline pigging receiver chamber to load the pig when the chamber door swung open under pressure and hit the employee's right hand and knee. The employee's right middle finger was amputated.,1
An employee was walking when she tripped over a bolt that was holding a metal plate to the floor and broke her right femur head.,1
An employee was picking up a bulkhead when some sharp metal lacerated his right thumb.,1
"An employee was walking to his car, slipped on ice in the parking lot and fell to the ground resulting in a broken hip.",1
An employee using a band saw sustained a finger amputation.,0
"A temporary employee was cleaning a mechanically driven roller on a coating machine when the roller pulled the employee's left hand into the machine, causing an open fracture on a finger that resulted in a fingertip amputation.",0
An employee fell out of the back of a truck and off the loading dock while on a forklift.,1
"An employee was helping to steady a bunker hoisted on a forklift jib attachment when the forklift drove forward over the employee's left foot. The employee's foot and toes broke, requiring hospitalization and surgery.",1
"An employee was driving a flatbed along the interstate when he noticed that some material had moved and pulled over to the emergency lane to secure the materials. He then slipped and fell, contacting metal flashing with his hand. His left hand was lacerated (cut through the tendon), requiring hospitalization.",1
"An employee was working on a scissor lift installing a column when a flange flipped and crushed their hand, resulting in amputation of the middle finger. Three other fingers were mangled.",0
An employee was guiding a piece of metal in place with welds when one of the welds broke and hit the employee on the hip. The employee suffered a hip fracture and was hospitalized.,1
"An iron casting fell off a hook and hit an employee's shoulder, breaking it.",1
"While pushing a pipe away from the dredge using a wooden paddle, an employee slipped and grabbed a cable, catching his fingers between a cable and a pulley. This resulted in the loss of part of his left middle and ring fingers.",1
An employee was using an air and water hose to air up a bicycle tire. The employee placed his hand over the nozzle to prevent the water from squirting out. Air got into the hand of the employee causing injuries to the right hand and forearm.,1
An employee was setting up a machine and suffered a fingertip amputation when his finger was pinched between two moving parts of the machine.,0
"An employee was working on the cylinder of a trailer, attempting to loosen the bolt with a pipe wrench, when it loosened unexpectedly and he slipped onto the floor, breaking his lower left leg.",1
"On February 23, 2018, an employee was pushing a bin of parts to their work area when a wheel on the cart broke off and rolled back onto the employee's right foot resulting in an injury that required surgery.",1
An employee was walking in a hallway and went to step over a pen when his knee gave in. The employee fell and sustained a bilateral quadriceps tear.,1
An employee suffered a left thumb laceration/crushing injury while installing a car engine.,1
"On February 23, 2018, at approximately 3:00 a.m., an employee climbed a 24-foot extension ladder and tied off while replacing a camera. A second employee held the ladder below. The ladder was leaned against and supported by a metal plate/wall that keeps bales of paper on the opposite side.  After completing the work, the employee was on his way down the ladder when a bale of paper struck the opposite side of the metal plate. The deflection of the metal jarred the ladder, and the employee fell 4 to 5 feet to the concrete floor below, suffering a compound fracture to the left wrist and requiring hospitalization.",1
"An employee climbed onto a trailer to attempt to close the door. The door strap was wrapped on the handle. The employee slipped and fell off the trailer approximately four feet to the ground fracturing the lumbar spine, left arm and pelvis.",1
"An employee was on a ladder reaching for a box on a top shelf when she lost balance, fell backwards, and landed on her backside, striking her head on the concrete floor. She was hospitalized.",1
"After welding a trailer, an employee stood up and the blow torch engaged toward his right hand resulting in third degree burns to his thumb and forefingers.",1
An employee received second degree burns to both feet after walking through a containment of hot (190 degrees) beet juice from a process disruption.,1
An employee was cleaning around a folding machine and lost his balance. As he went to catch himself he grabbed the safety bar. His hand slipped and went into the roller on the machine and was crushed.,1
"An employee was standing on a catwalk bridge, attempting to clean the inside of a kiln, when the employee fell approximately 30 feet off the catwalk and contacted debris and material inside the kiln. The employee suffered head trauma, a broken shoulder, broken ribs, and a broken pelvis, requiring hospitalization.",1
"An employee was moving a filled sand pot (4.5 feet tall, 3-foot diameter cylinder with wheels and a handle) into the building when the pot became caught on the door threshold and fell on his ankle, crushing it. He was hospitalized.",1
"An employee was trying to remove part of a broken board from the planer machine and made contact with the cutting head. The employee's right hand thumb, index and middle fingers were amputated.",0
"An employee was assaulted by a resident at a residential group home, suffering bites to the leg, finger, and head; a swollen eye; rib injuries; and a shoulder injury. The employee was hospitalized.",1
"An employee tripped on a piece of plastic (bag tie) and fell to the ground, fracturing her hip and requiring hospitalization.",1
"An employee was setting up a three-stand mill machine. As he placed his right hand on the block, his left hand pressed the jog forward button instead of the tension off button, causing the block to rotate counterclockwise and amputate his right middle and ring fingertips. The jog button was unguarded at the time.",1
"An employee was working when a fire occurred on the floor below her. She was potentially exposed to inhalants related to the fire and suffered an asthma attack, requiring hospitalization.",1
"An employee was removing large magnets from a piece of equipment and placing them in a box. When the employee placed a magnet over another magnet, the magnets were attracted to each other and suddenly came together amputating the right index fingertip and cutting the middle finger.",0
An employee got his right hand caught in the blade of the upcut saw and sustained an amputation above the knuckle to the ring finger and cuts to the middle and pinkie fingers.,1
An employee heard a sound that caused them to turn and their left index finger came in contact with a saw blade causing an amputation to the knuckle.,0
An employee was operating a crane when his hand was caught between the lifting beam attached to the crane and the support structure of a bar-feeding piece of equipment. He suffered a right pinky finger laceration and was hospitalized.,1
An employee slipped and fell to the same level while trying to use the first step on a scaffold access ladder. The employee hit and injured their ribs and was hospitalized.,1
"An employee was climbing up a fixed ladder to a roof hatch. When transitioning from the top of the ladder to the roof, he fell through the hatch about 15-20 feet to the ground.",1
"An employee changing out a belt on a trimmer was struck by the machine's door when it disengaged from the position in which it was propped, causing injury to the employee's left hand requiring surgery.",1
"An employee was 5-6 steps up a 12' orchard-style ladder when the ladder shifted on a patch of black ice. The employee lost balance and fell, becoming entangled in the ladder, and struck his head against the pavement during the fall resulting in a skull fracture.",1
"An employee was attempting to clear a machine jam when his right middle finger was caught between the machine's belt and pulley, requiring hospitalization. The machine was running at the time.",1
"An employee was working when a pallet of celery and boxes of radishes fell on him, injuring his left hip. He was hospitalized.",1
"An employee was directing the loading of a truck trailer and fell off the truck approximately 12 feet to the ground, injuring his back.",1
"On 2/23/2018, an employee slipped and fell off a loading dock fracturing his hip.",1
An employee was struck by a forklift in the breakdown area injuring both lower legs and a left toe.,1
An employee suffered a finger laceration that resulted in amputation of the left middle finger while cutting a piece of wood using a table saw. The wood kicked back causing the finger to make contact with the saw blade.,0
An employee tripped on a recycling box and broke her ankle.,1
"An employee was unloading a roll of steel with a crane when the roll moved and hit the employee's leg, breaking it below the knee. The employee required hospitalization and surgery.",1
"An employee's left foot was struck by a reversing powered industrial truck, suffering fractures and lacerations to the toes.",1
"An employee was cleaning the meat room when he picked up a meat poly board to carry to the sink. The board was too heavy, and he lost his balance and fell to the floor, fracturing his hip. He was hospitalized.",1
"An employee was unjamming a cardboard compactor with a metal rod. The compactor pulled the metal rod in and the employee's hand was caught in the compactor, resulting in partial amputation of the ring finger on the left hand.",1
"A team on the rig floor was attempting to rig down a cement head with a manifold assembly from the rig floor down the slide to the ground below. A winch line was being used to lift the cement head off the rig floor to allow the team members to push the head to the slide. The head was pushed out beyond the slide, but the manifold caught on the rig floor and the head swung back toward the floor and struck the swing gate. An employee was holding the swing gate open with his right hand and was struck on the pinky finger. The distal interphalangeal joint was partially amputated.",0
"An employee slipped while attempting to move/adjust a dock plate from the ground. The employee's back struck a truck's safety bar, fracturing vertebrae and requiring hospitalization.",1
"A 5,000-pound spreader bar rolled from its position on top of a pad eye and landed on an employee's right foot, crushing it.",1
An employee was exiting the building when he slipped on ice and fell to the ground. He felt a snap in his right leg and was hospitalized for a leg injury requiring surgery.,1
"Two employees were removing a 4-foot long piece of 14-inch diameter ventilation duct work, which supported a second piece of 10- to 11-foot long duct work. When the employees removed the 4-foot long piece, the 10 to 11-foot long piece fell and struck one of the employees, who suffered abdominal and intestinal injuries, a head contusion, and a fractured hip. The employee was hospitalized.",1
An employee was walking to his working area and stopped to help a co-worker to flip the hatch cover weighing 80-90 pounds. The employee's right foot slipped and he lost his balance. The plate fell and smashed the employee's left ring and middle fingers. The ring finger had a laceration on the tip and the middle finger was amputated.,0
"An employee experienced an asthma attack after being exposed to perfume or floor stripping chemicals, requiring hospitalization.",1
An employee was working with a Kelly swivel to move pipe joints on the rig floor. His coverall became wrapped into a rotating joint and the employee sustained a fracture to the left forearm.,1
"An employee was removing material from a bow rack using bolt cutters. When the wire was cut, the material fell down onto the employee's right foot, resulting in the amputation of two toes.",1
"An employee was setting a packer on a flatbed trailer to connect and thread the pipe when the employee's hand slipped and the pipe fell on it, trapping a finger between the pipe and the edge of the trailer. The employee sustained a right ring finger amputation.",0
"An employee slipped on newly waxed floors, resulting in hospitalization for a ruptured MCL.",1
An employee was bending to lift a pan that had fallen on the kitchen floor. The employee fell and fractured her hip.,1
An employee was stocking milk. As he lifted a case of milk he felt sharp pain and fell to the ground. The employee was hospitalized due to a tear in the abdominal aorta.,1
"On 02/23/2018, an employee was working on the tee at a machine and putting a wire on it when she stepped on the foot pedal. The machine then came down and amputated her left index fingertip.",1
An employee reached into a tube with his right hand and his middle finger came in contact with the auger on the pre-dust machine resulting in a partial amputation of the fingertip.,1
"An employee experienced stomach pains while transferring boxes from a pallet to a conveyor, requiring hospitalization and surgery for a hernia.",1
An employee was attempting to unclog hot (250 to 270 degrees) grease from a pipe when the grease caused second degree burns to the employee's shoulder and first degree burns to the arm.,1
"On February 25, 2018, an employee was operating a standup forklift and was following another standup forklift. When the first forklift slowed at an intersection, the injured employee's forklift collided with the first forklift. The forklift tine entered the operator's station and struck the injured employee's right foot resulting in a fracture requiring surgery and hospitalization.",1
An employee was struck by a vehicle while crossing a road intersection to get to another post.,1
"An employee was washing dishes when a spider bit his hand, requiring hospitalization.",1
An employee was using a cart caddy to pull a semi-trailer into the paint booth. The employee was walking backwards and backed up against the bumper of the semi-trailer ahead of him in the paint booth. The cart caddy continued to move towards the employee and struck the employee in the lower leg fracturing the tibia and fibula.,1
"An employee was working on the winder section of a line when the employee's left index fingertip was pinched between the ejector and a roll of product, resulting in an amputation.",0
"On February 25, 2018, an employee was cooking breakfast for a client. She had walked away from the stove and when she turned she found the skillet was smoking. When she grabbed the hot pan, grease spilled onto her hand and arm, causing second and third degree burns that required hospitalization.",1
"An employee was climbing an A-frame ladder when he slipped and fell to the floor, breaking his femur.",1
"After operating a deli slicer, an employee turned and slipped on lunchmeat that was on the floor. The employee suffered left tibia and fibula fractures, requiring hospitalization.",1
An employee was operating a pallet jack when the employee's leg was crushed between the pallet jack and an aisle. The employee suffered a fractured ankle and was hospitalized.,1
"An employee was on a ladder retrieving new brake pads for a customer from a storage self when he fell off the ladder, breaking his left ankle and shoulder.",1
"While conducting rig-up operations, two employees were carrying a 2-inch joint of iron piping when the first employee dropped the joint on the second employee's finger. His right middle finger was crushed between the falling pipe and piping that was on the ground, resulting in an amputation.",1
An employee tripped over a stationary object and landed on his right knee and hip. He was hospitalized with a broken hip.,1
An employee was cutting meat on a meat saw when the employee's hand slipped. The saw then partially amputated the employee's right ring finger.,0
"An employee was operating a skid steer over rough terrain when he hit a culvert, which jerked the skid steer. The abrupt motion caused him to hit his head against the rear window of the cab, fracturing his skull and requiring hospitalization.",1
"An employee was removing electrical conduit wrapped around a scaffold bracket when his finger was pinched between the conduit and scaffolding, resulting in an amputation.",1
"An employee was trying to free up a belt wheel on an auto bailer that was stuck when the machine engaged. His right glove was pulled into the wheel, and his right index fingertip was amputated by the machine.",0
"An employee was moving a crane into place to pick up a girder when the hook hit the girder, causing it to fall and hit the employee's right arm.",1
"An employee was climbing a ladder at the job site. When he was approximately 4 feet up, the ladder slipped out from under him. He fell off the ladder and his arm was caught on a window sill, forcing his arm upward and causing his left shoulder to become dislocated.",1
"An employee was placing material on a machine to be cut. When the employee actuated the clamp via the foot pedal, the clamp pinched the employee's left thumb, requiring surgery and hospitalization.",1
"An employee fell while descending a ladder, breaking a femur and requiring hospitalization.",1
"An employee was helping to load a BOP component on a tractor trailer when the tractor trailer operator started to move the truck. The employee jumped off the trailer to avoid being struck by the BOP and struck the ground, breaking the right knee.",1
An employee was checking the belt tension on a machine when the employee's right-hand fingers were caught in the belt and pulley's nip point. The employee's right index finger had to be medically amputated. The machine had not come to a full stop at the time of the incident.,0
"An employee was using a magnetic drill press to drill holes into a C-channel. The employee was trying to hold the press in place with a strap, which was wrapped around the employee's left hand and became caught in the drill. The strap then crushed the employee's left index finger, resulting in a partial amputation above the knuckle.",1
"An employee was operating a pallet jack in a warehouse with a wet floor when the pallet jack lost traction and slid into a concrete barrier. The employee's left foot was caught between the pallet jack and the barrier, resulting in a laceration and swelling to the foot.",1
A piece of concrete fell from a device and pinned an employee against a steel beam. The employee suffered a broken leg and was hospitalized.,1
"An employee was lifting a bed roller when the operator started the machine. The employee's gloved hand became caught in the bed roller's chain, resulting in a left index fingertip amputation.",0
An employee was cutting a frame using a straight cut saw when she moved her hand and the saw partially amputated her left thumb.,0
"An employee was standing on a chair to change out a ceiling tile when he fell to the floor, breaking his left wrist and requiring hospitalization.",1
An employee was cutting an approximately 5-inch pipe with a powered hand saw while standing on a ladder. The pipe came loose and struck the ladder and the employee knocking the employee to the floor. The employee sustained a fractured right elbow.,1
An employee walked into a wooden crate on a telehandler to dispose of trash/debris and fell 12 feet to a lower level. The employee suffered fractured ribs and a possible punctured lung.,1
An employee was troubleshooting equipment when the employee's right arm was caught and fractured between the equipment. The equipment was not locked/tagged out at the time.,1
"An employee was bending a 1/2-inch thick piece of stainless steel on a mechanical press when the steel broke and flew through the air, striking and lacerating his right cheek.",1
"An employee was checking on the pull belt function of a bag maker machine when the employee's left middle finger was caught in the machine's belt and pulley, amputating the fingertip.",0
"An employee was attempting to remove food that was stuck in a scallion machine when her left hand contacted the blade, amputating her pointer, middle, index, and pinky fingers. The machine was unguarded at the time.",1
"An employee was working on a conveyor belt when he slipped and fell into a molten lead pot, suffering burns to both feet/legs. He was hospitalized.",1
An employee was attempting to remove a stuck turret roller when a left-hand fingertip was caught and amputated on the turret roller.,0
"An employee was in the back of a tractor trailer moving an empty pallet when he lost balance and fell from the back of the trailer to the ground, landing on his left side. He fractured his left wrist and left ankle.",1
An employee was unloading her car in the parking lot when she fell to the ground and fractured her left hip.,1
"An employee was cutting blocks on an up-cut saw when his foot struck the pedal and activated the blade, which then amputated his left ring finger.",0
"An employee was working on a horizontal mixer, evacuating the kettle into a receiving hopper. He saw a piece of cheese at the end of the hopper and attempted to remove it. His hand then became lodged within the turning auger, and his middle finger was amputated at the second knuckle.",0
An employee working at the front counter attempted to stop a robbery and was stabbed with a knife.,1
An employee was pulling steel cables when one of the cables under tension broke loose and injured both of the employee's hands.,1
"An employee was walking to her desk when she tripped to the floor, breaking her left arm.",1
The employee was operating a company-owned pickup truck and was backing up to a customer's loading dock when the truck struck the dock. The employee struck their face on the cab of the truck fracturing their jaw.,1
"An employee was participating in training when he experienced sharp pain in his shoulders and upper body, requiring hospitalization for a muscle injury.",1
An employee broke his leg while involved in an intervention with a high school age student and was hospitalized.,1
"An employee slipped while climbing an exterior fixed ladder, fell approximately 14 feet to the ground, and suffered a fractured heel bone, requiring hospitalization.",1
"An employee was spraying paint with an airless sprayer (3,000 psi) when the spray stream struck his left middle finger, breaking the skin and injecting paint into his finger. He was hospitalized and had surgery.",1
"An employee was transporting a patient on a stretcher when the stretcher collapsed, pinching the employee's fingertip and resulting in an amputation.",0
"On February 27, 2018, at approximately 7:00 a.m., an employee was performing maintenance on a conveyor line when his fingers were caught between a pulley and belt, resulting in a left ring fingertip amputation.",0
"An employee was walking backward toward a jet bridge as it moved in his direction. The jet bridge and the tire then rolled on top of his left foot, fracturing it.",1
A employee sustained a laceration to the top of the left hand while washing out the hopper area of a mixer truck.,1
An employee was hooking up the hydraulic and electrical lines from a trailer to a semi-truck when the employee lost balance on the semi sidestep and fell face-first to the ground. The employee suffered internal bleeding and was hospitalized.,1
An employee was closing the door on his loader when his left thumb was caught between the vertical frame and the door. His left thumb tip was amputated.,0
"An employee was struck by another vehicle while driving an aerial lift, suffering rib, hip, and leg fractures.",1
"An employee was working near a press while a coworker was replacing a chain. As the coworker was manually pulling on the chain, the employee's right pinky finger was caught between the sprocket and the chain, resulting in a partial amputation of her right pinky finger.",1
"An employee was running board tiles through conveyor rollers of the sander when a board became jammed. As he attempted to remove the board, his right hand was caught and pulled into the hold-down rolls, suffering tissue damage above the wrist.",1
"An employee was cutting a metal strap on a raw material pallet using a box knife when a piece of the metal strap struck the employee's eye, causing an eye orbital rupture. Safety glasses were worn at the time.",1
"An employee was boarding a vessel through the aft shipping hatch when the 1,500-pound hatch inadvertently closed, striking the employee. The employee suffered back and neck contusions.",1
"A crew was performing hydrostatic testing to a recently installed steel gas service. The injured employee was turning off the valve when it blew out, striking the employee in the face.",1
"A maintenance employee accessed a cooling tower from a fixed ladder. While descending the fixed ladder, the employee fell approximately 6 feet to the roof surface, fracturing the right leg.",1
"An employee was using a loader to unload coal from a vessel when the loader bucket contacted the bucket system moving the coal out of the vessel. The bucket system then lifted the loader, throwing the employee to the deck of the vessel. The employee suffered shoulder and head injuries, requiring hospitalization. A seat belt was not worn at the time of the incident.",1
"An employee was standing in front of a 24"" steel casing while an adjoining 24"" steel casing was being moved. The employee was then crushed between the two casings, suffering a laceration to the lower part of the right leg.",1
"An employee was operating a horizontal lathe to polish a metal part when the part being turned came loose. The employee tried to catch the piece and it slammed his right hand into the machine. He suffered a laceration and multiple broken metacarpals, requiring hospitalization.",1
"On February 27, 2018, an employee was using a bench grinder when the employee's right hand was pulled into the grinding wheel, amputating the middle fingertip.",0
An employee was using an industrial snake when his hand came in contact with the cable.,1
"An employee was dry blasting garnet media from a step ladder. As he went to step down a rung, he stepped on the hose, angled the blasting gun down toward his leg, and blasted his thigh. He suffered a right leg media intrusion and required hospitalization.",1
"Three employees were moving a large tire from the bed of one pickup truck to another. The trucks were backed up to each other with the tailgates down. As the tire was being rolled from one truck to the other, it caught on the lip of the tailgate and started to fall. At this time, the injured employee was either knocked over or fell over and his hip struck the tailgate. He suffered a fractured pelvis.",1
"An employee was walking by the fryers when he slipped and fell, suffering burns on his right hand and wrist.",1
"While installing sheet metal decking to the second floor of a three-story commercial storage unit being built, an employee fell approximately 10 feet to the concrete floor below and landed on sheet metal siding, suffering fractured vertebrae.",1
"An employee was attempting to sit in a chair when the chair slipped out from underneath him, causing him to fall to the floor and fracture a femur.",1
An employee's right ring finger was amputated while pipe fitting.,1
An employee was placing a belt back on the track when the machine cycled and caught the employee's right index finger between the side of the pulley and the stationary table top resulting in amputation above the first knuckle. The machine was not locked out/tagged out at the time.,0
"An employee lost balance and fell to the ground while climbing a ladder, suffering a broken hip.",1
An employee suffered a ruptured hernia while staging boxes for shipment.,1
"While inflating a tire, an employee was struck by the tire or a piece of the rim, suffering a forehead laceration and orbital eye fracture.",1
"An employee was pinned between a stationary truck and a moving truck while at the loading dock at a customer's location. The employee sustained fractured ribs, a lacerated liver, soft tissue bruising to the legs and abdominal bruising.",1
"An employee was cutting pipe with a band saw when his middle finger contacted the blade, amputating his fingertip.",0
"An employee's right hand was caught inside a heated core machine while she was removing the cores from the box, suffering burns.",1
An employee was traveling west on a forklift through a warehouse when he impacted another forklift traveling east. The impact was a glancing left front to left front. The injured employee continued to travel and impacted a parked electric pallet jack about 20 feet away. The employee suffered a fractured left femur that required hospitalization and surgery.,1
"An employee was carrying mark up mail to the CFS station, tripped on the edge of a pallet on the work room floor and fell striking their head and nose on the floor. The employee sustained contusions and bruising to the forehead and nose.",1
An employee was checking the odometer in a straight truck when she fell out of the truck to the floor. She suffered a skull fracture and was hospitalized.,1
"An employee was performing preventative maintenance on an actuator when an air fitting came out of the valve, causing the actuator to come down on the employee's right index finger. The employee suffered an amputation of the right index finger between the first and second knuckles.",0
"An employee was changing the tooling in a trimmer. As he turned a wrench to loosen the bolt holding the trim blade, his elbow hit the cycle button, activating the machine while his hand was  inside. His right pinky and ring fingers had to be fully amputated at the hospital, and he had stitches in his middle finger. The machine was not locked out or turned off at the time of the incident.",0
"While untangling a metal coil that was caught on a stand, an employee fell approximately 36"" from a small work platform to the ground, suffering a fractured hip and pelvic injuries.",1
An employee turned and fell resulting in a chipped pelvis.,1
"An employee was reinstalling an atomizer header pipe when the tack welds failed, causing the pipe to fall approximately 4.5 feet and strike the employee in the lower right leg, fracturing it above the right knee and ankle.",1
"An employee was operating a saw to cut an alloy steel bar when he attempted to pull a piece out from the saw. The saw blade then cut his finger, resulting in a fingertip amputation.",0
"An employee was talking with his supervisor when he tripped over a drum dolly and fell, breaking his hip.",1
"An employee was letting down a car lift when his left index finger was caught between the lift lever and the lift, amputating his fingertip.",1
"An employee was using a die tool to remove a die blade when his left pinky finger was caught between the tool and the blade, amputating his fingertip.",0
"An employee was breaking out a second employee at the banding station area. A unit of plywood came into the banding station and was automatically strapped but failed to completely clear the banding area of the machine. The first employee walked over and was using his left hand to push the unit out of the strapper when his left foot contacted an electronic eye that controls the sequencing of the bander and triggered the machine. The top bar of the strapping machine then lowered onto his left hand, pinning it to the unit of plywood and breaking the bones behind the knuckles on his ring, middle, and index fingers. He was hospitalized.",1
"An employee was sitting at a desk inside a dealership near the showroom window when a car drove through the showroom glass and pinned the employee against the wall. The employee suffered severe lacerations and glass embedded in both forearms, requiring hospitalization and surgery.",1
"An employee was setting up the side matcher machine when the top head engaged and his hand was crushed, amputating part of the index and middle fingers.",0
An employee was loading a reel using take-up equipment when the equipment amputated the employee's right pinky finger. The equipment was not guarded at the time.,0
"The injured employee was assisting with material offload. His hand was above the two part block line on the crane. Two employees were disconnecting the rig. When the rigger gave the signal to raise the crane hook, the injured employee's hand became caught within the hook mechanism resulting in amputation of the right middle and ring fingers.",0
Two employees were installing freight car side doors and were having trouble fitting them. A pin securing it in place was removed and it fell on both employees. The first employee suffered multiple fractures to the body and was hospitalized. The second employee suffered a laceration to the leg.,1
"An employee was sliding an 11/64 thick sheet of steel off stationary rollers to an adjoining table. With his left hand positioned under the sheet and his left ring finger slightly through a hole cut in the sheet, he quickly and forcefully pulled and then pushed the sheet to the table. His left hand came in contact with the table edge, stopping and the sheet continued over the fingertip removing the tip of the finger and the top portion of the nail.",0
"An employee was holding a 10-inch diameter, 90-degree acid line pipe, while his coworker was using a 4-inch cutting wheel to cut the 90-degree portion of the pipe. After the final cut, a 6-inch pipe came out from the inside of the 10-inch pipe and fell on the employee's knee, fracturing it and requiring hospitalization.",1
"An employee was hospitalized for a broken leg, possible shoulder injury, and chest pains after being struck-by a high-lift forklift.",1
An employee was troubleshooting the outfeed line of the weathered board system and suffered a left thumb tip amputation when he contacted an unguarded chain drive and sprocket.,0
"An employee lost balance while talking to a customer and fell to the ground, suffering a hip injury.",1
"An employee was operating a tube bender machine to bend copper piping when she attempted to adjust a mis-feed. The machine then clamped down on her left index finger, amputating her fingertip.",1
"An employee was cleaning between the pipe roller stands in a prep rack when a pop-up roller was activated and lowered. The employee's arm was caught between the roller stops, breaking it and requiring hospitalization.",1
"An employee was working upstairs in the bourbon barrel finishing department. Barrels are transported from a lower floor up an incline to a chain conveyor in the bourbon barrel finish department. When barrel supply was interrupted, the employee placed his hand on the chain conveyor to lean over and look down the line. The line started and his fingertip, extending down against the chain, was caught in a chain and sprocket. The incident resulted in medical amputation of the fingertip.",0
"An employee was walking to a control gate to retrieve an inmate for transport. The employee's hand was in the fencing of the sliding steel control gate. When the gate opened, it severed the employee's right pinky fingertip.",0
On 2/26/2018 an employee tripped over a curb and fell resulting in a left arm fracture that required surgery and hospitalization. The employee also sustained severe bruising to the left side of the head and body.,1
"An employee was unloading a flatbed trailer attached to a semi-truck. The employee was on the load while a PIT operator was trying to adjust the load that had shifted. A steel plate broke from its binding and sliced into the employee's left leg just above the ankle, resulting in hospitalization.",1
An employee sustained a finger amputation while climbing a powered industrial vehicle.,1
"An employee was dismounting from the step of a mixer truck when he lost balance and placed his hand on the pedestal that supports the barrel roller. When the mixing barrel came around, it caught his glove and pulled his right pinky finger into the barrel, amputating his fingertip.",0
"An employee was walking on the sidewalk, tripped over the rain gutter and fell resulting in fractures to his right shoulder, forearm and wrist. The employee also sustained a rib fracture and bleeding from the mouth.",1
"On 2/28/2018, an employee was helping an operator manually load a laser machine with metal material when the material struck and injured the employee's head, requiring hospitalization.",1
"An employee was installing trim around a window using a nail gun when he lowered the nail gun and it went off, shooting a nail into his leg.",1
"An employee was unjamming a box on a packing line from the mezzanine catwalk above the line. The employee stood up after unjamming the box and was struck by an overhead ceiling fan blade. The force of the strike caused the employee to land on the conveyor belt, which was locked/tagged out. The employee sustained a severe head injury, requiring staples.",1
"While climbing the steps of an RV, an employee tripped and fell to the shop floor, fracturing the right wrist and requiring hospitalization.",1
An employee was operating a stand-up forklift. The employee was backing up the forklift and backed into an open machine enclosure gate. The back of the employee's left leg struck the gate resulting in a crushing injury and two lacerations.,1
A temporary employee was manipulating a roll bar when the employee's right middle fingertip was caught between the roll bar and a wall.,1
"While washing a truck in a wash bay, an employee slipped on ice and fell to the pavement, suffering four broken right-side ribs, as well as chest and arm contusions.",1
"Employees had cut out the concrete slab foundation inside a building that was being remodeled and were placing a sewer line in a 2' deep trench. The injured employee was walking towards the exit when the roof of the structure collapsed, striking and injuring the employee. The employee was hospitalized for treatment of a fractured collar bone and a sprained knee.",1
An employee fell from a ladder while attempting to remove a spike cylinder that needed repair. The employee was hospitalized for a head injury with internal bleeding and a fracture of the C7 vertebra.,1
"An employee was in a back room using a nutrition cart that had a three step ladder attached to it. She was obtaining product from a shelf when she fell backwards off the step ladder, landing on concrete and fracturing her left knee.",1
"An employee was driving a company personal transport vehicle when it hit a curb. The employee was thrown from the vehicle and hit the ground, breaking the left arm.",1
"An employee was repairing a fire door when the track or door system struck his right foot, resulting in an amputation to the right little toe.",0
"An employee was using a jump saw to cut lumber for dock decking. The employee was adjusting the board and pushed the foot pedal to engage the blade, which then cut off the employee's left index and middle fingertips. The employee's index finger had to be surgically amputated to the middle joint, and the middle finger was surgically amputated to the first joint. The saw was guarded at the time of the incident.",0
"An employee was operating a forklift to move cargo from one warehouse to another. A second employee was assisting with the cargo as the first employee was removing a lock. The first employee's right index finger was then caught between the cargo and the lock, resulting in an amputation at the second joint.",1
"An employee was standing beside a tractor trailer when the 960-pound steel bundle that was being unload fell and struck the employee, breaking the left tibia and fibula and the right occipital bone.",1
"An employee had dismounted his vehicle to make a delivery and was returning to his postal vehicle to continue his route. He was walking down a paved walkway with a slight incline. The pavement was wet due to rainy weather. He slipped and fell, landing on his knee and breaking his kneecap in two places. He was hospitalized.",1
"An employee was on the interior of a building and leaning out the window to weather proof the flange when the employee slipped and fell 14 feet to the ground. The employee punctured a lung and broke the upper left arm, clavicle, upper chest bone, six left-side ribs, and lower back.",1
"An employee was disassembling a dull extruder machine when the machine's plate crushed the employee's left ring and middle fingers, fracturing one and crushing the bone in the other. Both fingers had to be surgically amputated above the first knuckle.",0
"An employee was standing on an A-frame ladder approximately 3 to 4 feet off the ground, attempting to install a porch ceiling soffit, when the ladder and employee tumbled to the ground. The employee's leg was pinned in a rung of the ladder, fracturing the tibia and fibula. The ladder was placed on loose fill rock at the time of the incident.",1
An employee was operating a saw to cut a board. He was adjusting the board when he hit the pedal to lower the saw. The saw came down on his hand and amputated his right middle and index fingertips.,1
"On March 1, 2018, an employee was repairing a tank engine and revving it manually near an exposed turbo air inlet fan blade. The employee's right hand then came into contact with the rotating fan blade, amputating the index and middle fingers. The air intake was unguarded at the time of the incident.",1
"On March 1, 2018, at 2:30 p.m., an employee was entering the break room, which had a newly surfaced floor, when she slipped and fell, fracturing her hip and requiring hospitalization. Her boots were wet at the time of the incident.",1
"An employee slipped while running a lathe and his shirt was caught in the workhead, pulling him into the machine.",1
An employee was untangling a crimped hydraulic line and hydraulic fluid was injected into the employee's hand.,1
An employee was cleaning a conveyor when his right arm was fractured in the conveyor rollers.,1
"An employee tripped and fell into a metal racking system, suffering possible broken hands and two severe cuts on the forehead.",1
An employee was preparing for a training course and developed symptoms of heat stress and a muscle injury.,1
"An employee was using a miter (chop) saw to cut tubing when the saw guard became stuck on the tubing. As she attempted to dislodge the guard, the saw severely cut her left middle and ring fingers.",1
"An employee fell approximately 6 feet to a lower level while cleaning equipment, suffering a back injury.",1
"An employee was standing on an 8-foot ladder putting away a mannequin on a shelf when he lost his footing and fell to the floor, suffering a broken tooth, hairline fracture of his left wrist, and sprained right wrist.",1
"An employee was on an order picker 3.5 feet high, retrieving a windshield from a rack, when a stack of glass windshields struck him. He fell to the concrete floor and injured his nose.",1
An employee was delivering packages when he lost footing while going down some steps. He tried to catch himself by grabbing onto the stair rail and injured the two middle fingers on his left hand.,1
"An employee was preparing a cleaning solution for a weekly scheduled cleaning when two incompatible solutions were mixed, exposing the employee to chemical vapors. The employee experienced difficulty breathing.",1
"An employee was cutting meat with a center-cut saw when the saw did not cut through the meat. He reached for the meat to tear it off and his left thumb hit the saw blade, resulting in a partial amputation.",0
"An employee leaned half of an extension ladder against the side of a power unit and started to climb up while two other employees held the sides of the ladder. When he extended his hand to receive a nozzle from one of the other employees, the ladder slipped out from underneath him. He fell approximately 4 to 5 feet and hit the ground, breaking his ankle.",1
An employee was moving a pallet jack when the employee's ankle was pinned and fractured between a rack system and the pallet jack.,1
An employee was hoisting a large part off of a paint rack. The part shifted as it was pulled off the rack using a chain and sling. The employee's finger was caught between the part and the cart resulting in a partial amputation of the right index finger.,0
An employee was using a knife to cut bacon and sustained an amputation injury to the left index finger.,0
"An employee was rolling pipe when his right index finger was pinched between two pipes, resulting in an amputation.",0
"An employee was helping to lay down pipes on a work-over rig's pipe wrangler when a pipe jumped out of the wrangler and struck his side, breaking four ribs. He was hospitalized.",1
"An employee was mopping the floor in the gas station when she slipped on a wet spot and fell, fracturing her right hip.",1
"An employee was moving a sheetrock dolly with dense glass down a small plywood ramp that bridged a concrete curb to the next level (approximately 8 inches high) when the dolly tipped over and fell on the employee, fracturing his right leg between the knee and calf area.",1
"An employee was using a hydraulic jack to lift a truck and change a flat tire. The jack slipped, catching the employee's right index finger between the bead of the tire and the wheel. The employee's right index fingertip was amputated.",0
"An employee fell approximately 36"" from a ladder while installing flashing on ductwork, fracturing the left hip and left wrist.",1
An employee was operating a jointer when the blade amputated the employee's left pinky fingertip to the first knuckle.,0
An employee suffered a finger amputation while cleaning a conveyor. The conveyor was running at the time of the incident.,0
An employee suffered a hernia while unloading 25 pounds of material from a truck and onto a forklift.,1
"An employee was using a belt sander to sharpen a rod when his hand was caught between the sander and the table, resulting in an amputation to his left middle finger's first digit.",1
An employee was holding a handheld drill in one hand and using his other hand to place a bit in the drill when it unexpectedly energized. The glove he was wearing twisted around the drill and his left fourth fingertip was amputated. His fifth finger sustained a laceration that required stitches.,0
"While changing a light fixture from a 12-foot step ladder, an employee fell to the ground, suffering a fractured pelvis.",1
"On March 2, 2018, two employees were using a tractor and hay chopping machine to place bedding in calf hutches. The first employee was behind the tractor when the second employee lost sight of him and backed the tractor over his left foot. He suffered left foot fractures and was hospitalized.",1
An employee was manually feeding bags into a machine when his left index finger was caught and partially amputated between the machine's belt and sprocket.,0
"A crew was rigging down when a weight bucket became hung up while the derrick was being scoped in. One of the employees pulled on the cable, causing the climbing assist weight to come loose and descend toward him. As a result, he let go of the line and was struck by the weight. He suffered a right arm fracture, broken ribs, and lacerations to his left gallbladder and kidney.",1
An employee was cutting into an excavated PVC waterline with a pipe saw when the PVC pipe shattered under pressure. The employee was hospitalized with fractures to the forearm and cheekbone and lacerations to the face and neck.,1
An employee was changing the air can on a crane swing drum when the drum turned and caught the employee's right hand between it and a beam bracket. The bracket runs across the drum.,1
An employee was checking the radiator fan of a vehicle after the fan was replaced when the fan blades amputated his left index finger.,1
An employee was removing a roll of material from a digital printer when the roll bar/shaft amputated the employee's left index finger to the first knuckle.,0
"An employee tripped over a ladder that was placed in the bed of a truck and 
lost his balance. He then jumped off the truck bed to the ground and broke his right heel.",1
"An employee was loading material onto a metal catwalk when a forklift hit the catwalk, causing it to fall off the dunnage supporting it and onto the employee's foot. His foot was crushed and required hospitalization.",1
"An employee was using a forklift to transfer boxes from one building to another. Strong gusts of wind blew the boxes over, and the employee reached to grab the plastic wrapping that held the boxes together. The wind continued to pull the boxes and twisted the wrapping around his index fingertip, severing it.",1
"An employee was punching holes in business cards using an electric, foot-operated, three-hole punch. When she cycled the machine, the clamps descended and closed on her right little finger. She lost her fingernail and fractured a bone in her fingertip.",1
"An employee was stepping off a truck while holding a tire in each hand when the employee slipped on snow and fell to the ground, breaking the collarbone.",1
"A tree branch fell on an employee during inclement weather, injuring his leg.",1
"An employee was adjusting a trailer hitch when it fell on his right foot, breaking his pinky toe. He was hospitalized and had surgery.",1
"An employee was flagging a forklift operator while he picked up a pipe rack to be moved. The pipe rack fell from the forks of the forklift and landed on the employee's feet, crushing both.",1
"On 03/02/2018, an employee was restraining a patient when the patient struck the employee's rib area, lacerating the liver.",1
"An employee was working on a chicken processing line and cleaning chicken from a motor box when his gloved hand was pulled into a gear shaft, resulting in a fingertip amputation.",0
"On March 2, 2018, at 6:05 a.m., an employee was welding or grinding to install table slats on a plasma cutting table when an explosion occurred, causing the employee to fall to the floor. The employee suffered thermal burns and fractured arms, legs, and ribs.",1
"An employee was walking to a company truck when he slipped on ice and fell to the ground, fracturing his hip.",1
An employee was moving a cart that contained metal strapping when the cart tipped over and the employee's pinky finger was pinched between the cart and a workstation. The employee suffered trauma to the finger and required hospitalization and surgery.,1
"An employee fell from a flatbed trailer while making a delivery, suffering head and rib injuries that required hospitalization.",1
"An employee was attempting to remove a bushing from a fabricated piece of steel. The weld failed on the bushing extraction device and struck the employee in the forehead. The employee sustained a laceration and fracture to the bones in the forehead, requiring hospitalization and surgery.",1
"An employee was lacing up the line with paper when he lost his balance and fell to the floor, breaking his foot and ankle. He required surgery.",1
An employee was attempting to cut horns off a carcass at a horn removal machine when the machine activated and amputated two of the employee's fingers.,0
"An employee was servicing a customer's propane tank at the customer's residence. The employee reached down to pick up a tool and was bitten by a copperhead snake. The employee received anti-venom and had an adverse reaction to the anti-venom, requiring hospitalization.",1
"An employee was pulling cable down on a swing stage to roll it up when the cable touched a crosswalk pole and meter pole, causing an electric arc that shocked him. He was hospitalized.",1
"An employee had just finished sheathing a roof and was exiting it. He slid off a wall walker scaffold to get into a window, but his tool belt was caught on something, causing him to be pulled out of the window and fall 12 to 15 feet to the ground below. He fractured his leg.",1
"An employee was preparing for a confined space entry and got stuck between two pieces of process equipment resulting in a broken shoulder, lacerations and facial bruising.",1
"An employee was working at the front register. When she turned around, she tripped and fell on her back resulting in four fractured ribs.",1
An employee was attempting to unjam a piece of meat from a meat tenderizer machine when two of the employee's right middle fingers were pulled into the tenderizer and crushed.,1
"An employee used a step ladder to enter the ceiling of a building and then fell through the ceiling, striking his head on the floor below. He was hospitalized.",1
An employee was attempting to perform maintenance on a machine's gears when the chain drive partially amputated two of the employee's fingers. The machine was unguarded and running at the time of the incident.,0
An employee was using a balancing machine to balance tires when a wheel fell and the employee's hand was caught between the wheel and balancing machine. The employee suffered a finger amputation.,0
"An employee was helping to offload a three-bar while a second employee went to get a walkie forklift. The employee was grabbing some dunnage when the second employee passed and brushed the dunnage, which then pressed the employee’s right knee between the dunnage and a pole. The employee suffered a fractured right knee.",1
"An employee was moving boxcars on a rail line in a plant when his jacket pocket was caught on a boxcar. He was then dragged approximately 20 yards over a pile of 4x4's and into a concrete post, injuring his left hip area.",1
"An employee was watching the wrench. When the wrench moved, the employee's hand was caught resulting in a partial amputation of the right ring finger.",0
"On March 3, 2018, an employee struggled to open a trailer door and suffered a hernia, requiring hospitalization and surgery.",1
"Two employees were installing a metal panel ceiling. As they flipped the panel over, it slipped from the injured employee's hand and lacerated his wrist, slashing the artery. He required sutures and hospitalization.",1
"An employee was securing a load onto a flatbed truck when an empty pallet fell off the truck and struck his neck, fracturing his vertebrae and requiring hospitalization.",1
"An employee was walking beneath a ladder to get some towels when he hit his head on the ladder, suffering a contusion and requiring hospitalization.",1
An employee was accessing a ladder. The ladder kicked out and the employee fell breaking an ankle.,1
An employee was conducting a metal detector portal security check and was directing a guest to go through the detector when she tripped on a floor mat that was covering power cables to the portal. She fell and fractured her left wrist.,1
"On March 3, 2018, an employee was going to his vehicle when he was struck in the eye by shattered plexiglass light globe debris during a wind storm. He suffered face and eye lacerations, requiring hospitalization.",1
"An employee broke an ankle while working in the lumber facility, requiring hospitalization.",1
"Employee was back-filling a trench with a skid loader when the skid loader fell forward into the trench and flipped over onto an H-pile beam. The employee was trapped inside the flipped skid loader, breaking a leg and arm and dislocating a thumb.",1
"An employee experienced difficulty breathing, coughing, and an allergic reaction after being exposed to isolating material in an elevator's machine room. He was hospitalized.",1
"An employee was checking residents when she slipped on water and fell, injuring her right hip and requiring hospitalization.",1
An employee was feeding material into a machine and amputated two fingertips with bone loss in the gear system. The machine was guarded at the time.,0
"An employee tripped and fell on uneven concrete, breaking her left wrist and scratching her head.",1
"An employee and his colleagues were relocating a dough extruder with a forklift. While they were placing the extruder on a rolling platform, the extruder tipped and fell on the employee, who suffered a lower back contusion.",1
"An employee was unloading a warehouse truck. While backing out, he tripped over another pallet and fell. His foot/leg was pinned between two pallets resulting in an internal injury to a vein.",1
"An employee was helping to trim the nails of a large dog when it bit the employee's arm, breaking the skin.",1
An employee was inspecting his equipment to make sure all safety equipment was in place and properly operating. He was moving a flex lance to another tube when the dump valve was engaged. High-pressure water from the flex lance tip released and cut his left hand.,1
"An employee was pushing a toboggan when she strained her back, requiring hospitalization for a bulging disc.",1
"An employee was using a meat saw to cut pork neck bones when the employee's left index finger contacted the saw blade, suffering an avulsion or amputation.",0
"An employee fell on the sidewalk while walking and broke a femur, requiring hospitalization.",1
"An employee was pushing a plastic ice cart when the cart wheel hit a rut, causing it to stop. The employee's forward momentum caused her to then fall onto the cart, striking her head and finger. She suffered a fracture to a right-hand finger and was hospitalized.",1
An employee was loosening a plug on a union. The pipe wrench fell and the employee lost his balance causing him to step awkwardly and break a leg.,1
"An employee was shutting the door to an armored truck when the door struck and lacerated his right pinky fingertip, which had to be amputated.",0
"An employee and three other coworkers were setting a wall panel down on the floor. As the wall was lowered, the employee's finger was caught between the wall and his steel-toed boot. He sustained a traumatic amputation of the tuft of the left third digit.",0
An employee was applying grease to the sprocket of a traffic roller when his right ring fingertip was caught and amputated in the chain of the sprocket.,1
"An employee was cleaning a machine when his glove was caught in the machine, which then pulled his hand in and amputated his index and middle fingertips.",1
"A temporary employee slipped and fell while walking on loose rock at a construction site, breaking his left ankle and requiring hospitalization.",1
"An employee was attempting to catch a closing steel door when the employee's left middle finger was pinched between the door and the doorframe, amputating the fingertip.",0
"An employee was placing barricades into a row of other barricades when his left ring finger was pinched between two barricades, resulting in a fingertip amputation.",1
"An employee was struck by a truck while walking across a lot early in the morning, suffering a lower leg laceration. A high-visibility vest was not worn at the time of the incident.",1
"An employee was turning a walkie forklift when he pulled out in front of a hi-rise lift that was approaching the end of the aisle. The hi-rise was unable to stop and pinned his right lower leg against the walkie, breaking his tibia.",1
An employee was loading bags onto a plane when she felt discomfort in her back due to a spider fracture.,1
An employee was using chemical paint remover in the basement area when a heater's pilot light ignited the fumes. The employee was hospitalized for smoke inhalation.,1
"Employees were using a crane to put a spud in a barge. When an employee attempted to unhook the crane, the crane cable became caught and the block of the crane swung back and caught the employee's hand between the block and the spud. The employee's middle and ring fingertips were amputated.",1
"An employee was transferring a 54' pipe that weighed 12,000 pounds with an airlift cart when the pipe rolled off the cart to the ground. As he attempted to stop it from striking another employee, he was struck by the pipe resulting in a pelvic fracture.",1
"An employee was standing on a billboard catwalk and preparing to install a billboard vinyl when the employee fell approximately 20 feet to the ground, suffering broken ribs, bruises, and scrapes.",1
"An employee was moving a single-person lift into an elevator when the lift tipped over and struck the employee's left foot, breaking four bones.",1
"An employee was dry mopping and sweeping a pedestrian aisle near a packing line when she slipped and fell on the floor, injuring her head and back and suffering a possible concussion. She was hospitalized.",1
"An employee was being trained by a second employee on how to close a golf cart tailgate when the second employee closed the tail gate on the employee's left ring finger, amputating the fingertip.",0
An employee was operating a heat shrink cutter and amputated a fingertip without bone loss.,0
"An employee was pushing meat down a rail system when a beef carcass fell off its hooks and fractured the employee's ankle, requiring hospitalization.",1
An employee was cutting copper wire on a shear when the blade amputated his right pinky finger. The shear was not guarded at the time.,0
"An employee was spotting a dozer truck when it ran over the employee's legs, breaking the thighs and legs.",1
"An employee fell to the ground while skiing, fracturing the right and left femurs.",1
"An employee shut down a saw and was attempting to grab something from the machine when the blade cut his left-hand palm, requiring surgery. The blade had not come to a complete stop at the time of the incident.",1
"An employee was installing natural gas lines above a drop ceiling when the platform he was standing on gave way. He fell through the ceiling to the concrete floor approximately 25 feet below, suffering internal organ damage.",1
"An employee was on site collecting trash from a dumpster. The enclosure gate for the dumpster had drop pegs that normally hold, but 70 mph winds overtook the gate and slammed it against the dumpster while the employee's hand was in the way. The employee sustained broken bones, a dislocation, and vascular injuries to the right hand.",1
"An employee was installing duct work from the fourth rung of an 8-foot ladder when it slipped out from under him and he fell to the floor, breaking vertebrae.",1
"An employee slipped and fell to the floor while walking, fracturing her left wrist and requiring surgery.",1
An employee was moving a cart full of streetlight poles and got his finger pinned between the poles resulting in a fingertip amputation.,0
An employee was operating a table saw when the blade amputated one whole finger and part of another finger. The saw was unguarded at the time.,0
"An employee was using a forklift and a crate to raise himself to dismantle a grain drying system when the crate became unstable and he fell approximately 10 feet to the ground. He fractured his leg and three vertebrae, requiring hospitalization.",1
"An employee was connecting jumper cables to a truck when he slipped off the tire of the truck and fell on his arm, fracturing it.",1
"An employee was operating an electric pallet jack to move product in the warehouse. During the process, he stepped off the pallet jack and it struck his left foot, causing a laceration and fracture.",1
"An employee was troubleshooting auxiliary (clinch nut) equipment inside a robotic cell when it activated and pinched the employee's left index finger, amputating the fingertip.",0
An employee was working on the press floor changing a die. The spacer under the die slipped and the die amputated the employee's left ring fingertip.,0
An employee was working near the end of a gin/conveyor in the press/bagging area and caught an arm in the conveyor roller resulting in injury to the upper arm.,1
"An employee was attempting to remove a grinding blade on a 4"" grinder. He lifted the grinder and put it under his right arm to help him grip the tool. While grabbing the blade with his left hand and applying pressure, he inadvertently flipped the safety switch with the underside of his arm. The trigger then activated, causing the blade to move and suck his glove between the guard of the grinder. The blade then cut into his left index fingertip.",1
"On March 6, 2018, an employee was walking down five stairs when she missed the last step and fell onto her left knee, fracturing her leg and requiring surgery.",1
"An employee was standing on a 39-inch platform and inspecting a rocket launcher that was on the back of a truck when the platform tilted and the employee fell to the ground, fracturing a leg.",1
"An employee was struck in the head by a fitting that fell when a contractor was working overhead, requiring hospitalization for a concussion.",1
An employee was using a miter saw to cut vinyl and contacted the saw blade lacerating all four fingers on the right hand. The index finger was amputated.,0
"An employee was loading an aircraft. As he stepped from the aircraft to the deck loader, he fell 10 to 12 feet to the ground, lacerating his face and breaking his pelvis.",1
"An employee was on top of a sand box container preparing to close the lid when a strong gust of wind blew him off the container to the ground. He fractured his elbow, hip, and ribs; punctured a lung; and suffered some scrapes and bruises.",1
An employee was in an aerial lift preparing to install mechanical rigging onto a new power line when the fourth and fifth fingers of the employee's right hand were pinched and crushed between the aerial lift basket rail and the cross arm of the power line structure.,1
"An employee was changing a tire on a vehicle when the jack fell, allowing the vehicle to descend on and break the employee's pelvis.",1
"An employee was standing on a lift wearing his harness to remove a section of duct work. He took the bolts off from around the section of duct work and then lowered the lift. The section of duct work was supposed to lower with the lift, but when he looked back, he noticed that the duct work was not coming down. At this time, he used his upper body, shoulder area to loosen the section. The duct work then fell and pinned him underneath it. He suffered a lumbar fracture.",1
"After refueling and boarding a bus, an employee placed items into her purse, which was on top of the first seat of the bus, and decided to exit the bus to visually confirm that the fuel cap was secure. As she turned and made her way to the stairway, her right foot caught the corner of the cushioned partition that blocks the first seat from the stairway, causing her body to twist while simultaneously falling. She fractured her right ankle, requiring hospitalization and surgery.",1
An employee was moving an electric motor on a shelving unit when the motor began to roll. The employee tried to stop the motor from rolling by placing a wedge under the motor and got his finger caught between the motor and the shelving unit resulting in amputation of an index finger.,0
"An employee was on a step ladder using a hammer drill to drill concrete when the employee fell approximately 6 feet to the cement ground, suffering skull fractures, bleeding from the ear, and fractured ribs.",1
"An employee was trying to wind up plastic on a packaging machine when the employee's right hand was caught in an 18-inch sprocket, resulting in a right index finger amputation.",0
"An employee was descending a two-step stool when she missed the bottom step and fell to the ground, striking and fracturing her knee on the floor. She was hospitalized.",1
"An employee tripped while exiting an elevator, striking his head on the wall in front of him. He broke his neck and suffered paralysis, requiring hospitalization.",1
"On March 6, 2018, an employee slipped and fell on snow/ice in the parking lot, breaking his right femur and requiring hospitalization.",1
"An employee had finished working on a truck and went to let the jack down. The jack was all the way down but the tires were still off the ground. He jacked the truck back up and put a wood block under one side's tires and the old axle seats under the other side's tire. He then let the jack down again, but the truck still was not all the way down. He jacked the truck back up and slid one of the frame stands back under the rear frame section. He then put his left hand under the stand to push the tube up to the frame to pin the tube with his right hand. Before he got the pin in the tube, the truck came off the jack and fell onto the stand tube, catching and crushing his hand between the truck frame and the jack stand. He was hospitalized.",1
"An employee was pulling stock with an electric pallet jack when his right leg was crushed between the jack and a rack, breaking his leg and requiring surgery.",1
"An employee was helping another employee move a transmission when he lost his balance and fell, allowing the transmission to fall on his lower left leg. His left tibia and ankle broke.",1
"An employee was performing a quality check on incoming materials on a machine's feed line. A nearby forklift operator was attempting to lift a two-tiered stack of cardboard for loading into the machine when the top tier fell on the employee. The employee's right leg broke in several places, requiring hospitalization and surgery.",1
"An employee was sitting on a thermoforming machine's exit tray when it collapsed and she fell to the floor, breaking her ankle.",1
"An employee was removing unwanted film material from a machine when he flipped a small piece of the material with his finger. His right index finger was then caught in the belt and pulley, resulting in a fingertip amputation. The belt and pulley were unguarded at the time.",0
"An employee was unhitching a trailer when his left pinky finger was caught between the chain and the hitch. As he pulled his hand out, his left pinky fingertip was severed.",0
"An employee was walking on tube steel at ground level when he slipped and fell to the ground, breaking his left leg and requiring hospitalization.",1
"An employee was operating a wire draw machine when the employee's glove was caught in the machine, which then pulled the employee's hand into the machine. The wire pressed the employee's right index finger against the plate, resulting in a partial amputation.",0
"An employee was unloading cargo containers off an airplane when an airline shipping container began to roll off the platform. As he attempted to stop it, the container struck his right arm and pinned it against another container. His right arm broke, requiring hospitalization.",1
"An employee had been operating a sweeper truck and wanted to enter another room. To access the room, he had to move some bagged materials. He climbed to the top of the 7-foot stack of materials, stood up, and fell backwards onto the concrete floor. He fractured his tailbone and was hospitalized.",1
An employee was moving material with an overhead crane when the crane released and dropped the material on the employee's foot causing injury.,0
"An employee was operating a forklift and trying to avoid a pallet in an aisle when the employee struck a rack system, injuring a foot.",1
"An employee was loading a pallet onto a forklift when the pallet fell down and struck his left leg, fracturing it.",1
An employee was operating an extrusion machine when his left hand was caught on a chrome roll in an in-running nip point. Three fingers were amputated.,0
"An employee was moving a panel switch to the open position on a 480-volt motor control center breaker when an electrical arc flash occurred, burning the employee's eyes, face, neck, and hands.",1
"An employee was part of a crew rigging a vertical tank to be lifted by a crane. His gloved right hand was holding a 1.5-inch wire rope choker (sling) when it slipped and his right pinky finger was impacted by a nearby pipe barrier. His finger broke and was lacerated above the first joint, resulting in an amputation above the first joint.",0
"An employee was descending the ladder of a scaffold when he stepped off the ladder too early. Attempting to catch himself, he grabbed for the ladder and his ring was caught, tearing the skin on his left ring finger. His finger had to be surgically amputated.",0
"An employee was placing an extension on a hand-operated drill when his hand was caught and pulled into the drill bit, amputating his left pinky finger.",1
"An employee was on a ladder installing a flag pole when the employee fell to the ground, suffering right side, face, rib, wrist, and shoulder injuries.",1
An employee was attempting to stop a steel load from swinging when the employee's left middle finger was smashed and partially amputated between two steel loads.,0
"An employee was teaching a new employee how to operate a guillotine when the alignment of a product roll inside the guillotine needed to be fixed. The employee was attempting to grab the roll when the controls were activated. The guillotine then came down on the employee’s left hand, amputating the pinky, ring, middle, and index fingers. The guillotine was guarded at the time of the incident.",0
"An employee was struck by a pallet that was struck by a powered industrial truck, breaking an ankle and requiring hospitalization.",1
"An employee was hanging on a long line from a helicopter, clipping in travels on the arms of a transmission mono pole, when the helicopter maneuvered the employee into a three-phase distribution line. The employee suffered an electrical shock to the hip and buttocks, and later required amputation of the left arm from the elbow.",1
An employee was dismounting from the front fender of a powered industrial truck when the truck ran over and fractured the employee's lower leg.,1
"An employee was working at a press when the employee took a ladle coated in molten aluminum and dipped it in water. The ladle then popped/exploded, sending flying molten metal in multiple directions. The metal burned the employee's head, neck, back, and hand.",1
An employee was unloading a trailer when he stepped back and had his foot run over by a skid steer.,1
"An employee was up on an I-beam, tied off to set a long span joist on the wide flange beam. As the joist was coming up into position, it got close to his foot. He moved his foot, lost his balance, and fell off the beam. The retractable caught him, bounced once, and swung toward the building. The bottom flange of the I-beam then severed the retractable and the employee fell approximately 10 feet onto the sand/concrete floor. He fractured his left wrist and was hospitalized.",1
"An employee was replacing shingles and roofing paper on a residential home when he tripped on the roofing paper and fell about 15 to 20 feet through a skylight cutout hole to the concrete floor. He injured his head and fractured his nose, cheekbones, neck, and right arm.",1
"Two employees were un-spooling a wire rope when it became snagged on a flange. When it came loose, it caught one of the employees and spun him around the reel. He hit a (powered off and protected) saw and then the ground, suffering a concussion and bruise on the brain. He was hospitalized.",1
An employee was cleaning around a saw and struck their thumb against the saw blade resulting in a partial amputation.,0
"An employee had just loaded a truck with dry ice when the lift gate closed and pinched the employee's finger, resulting in a fingertip amputation.",0
"While loading vehicles onto a multi-car hauler trailer, an employee fell from the top of the 10-foot trailer to the ground, breaking several ribs and suffering a serious head injury. The employee was hospitalized.",1
"An employee was attempting to run to the inside of a pickup truck that had accidentally been placed in reverse instead of park when the employee was pinned between two vehicles, suffering broken ribs and a fractured left shoulder.",1
"An employee was climbing out of a box truck when his feet became tangled, causing him to fall approximately 4 feet to the ground. He struck his head on the concrete, fracturing his skull and left wrist and requiring hospitalization.",1
"An employee was lining up the casting for trimming on a pneumatic press when the machine activated and severed his distal phalanx, requiring hospitalization.",1
"An employee applied methyl ethyl ketone (MEK) to a metal washer and was attempting to weld the part when an explosion occurred. The pressure from the explosion released the washer, which struck the employee in the shoulder and the side of his face.",1
An employee delivering at a customer store fell and fractured his pelvis.,1
An employee was pulling a cart of glass windows to be loaded onto a truck when he backed up to a pillar and his left hand was caught and lacerated between the cart's handle and a fire extinguisher. He was hospitalized.,1
"An employee was jogging a cylinder cart onto the lift gate of a service truck when he lost his balance and his right leg was caught by the cart, leaving him hanging upside down. He managed to pull himself back up and fell from the lift gate (3.5 to 4 feet high) to the ground below, fracturing his left tibia.",1
"An employee was using a tire machine when the tire dismounting arm struck the employee’s right middle finger, partially amputating the first joint.",0
"An employee was installing a ground rod, slipped and fell impaling himself on the ground rod. The rod entered his left thigh.",1
An employee was using a wrench to remove a filling from a transformer when he felt something pop in his right arm.,1
"An employee was repairing a well. He was connecting a polish rod to a rod string and stuffing box. The box was 3 inches above a pipe wrench that was on the polish rod. The employee's hand was on the pipe wrench when the stuffing box slipped down onto his left index finger, crushing it and resulting in an amputation.",0
"An employee was inspecting the attic of a home when she fell through the garage ceiling to the concrete floor below, breaking her femur.",1
"An employee was walking down outdoor stairs when he slipped on ice and fell down 8 to 10 steps, fracturing his back and bruising ribs. He was hospitalized.",1
"On March 7, 2018, an employee stepped off a forklift and went near the forks to take inventory. While she was near the load and forks, another forklift struck her forklift, which caused it to strike her chest. She suffered a collapsed lung.",1
An employee fell 15 feet from a roof when his lanyard broke and fractured his knee.,1
"An employee was running a large CNC lathe machine when the employee's hand was pinched between the moving pallet and a fixed point on the machine, partially amputating the right middle finger.",0
"An employee was surveying joints and concrete inside a construction zone about 5 feet away from the safety cones when a pickup truck with a trailer hit him. He suffered a broken left leg, concussion, and laceration to his lower back, requiring hospitalization.",1
An employee was mowing grass when he crashed into another mower. The other mower's blade cut and partially amputated his right heel.,1
An employee was cutting insulation on a large diameter wire to repair an amusement ride when the knife slipped out and deeply lacerated his left wrist just above the leather work gloves he was wearing.,1
"An employee was guiding a mobile office unit to the correct location when the employee's left index finger was pinched and smashed between a cement curb and the unit, resulting in an amputation from mid-joint.",0
"An employee was installing a gas service/main and was in a trench standing on the gas main to push it down. His hand was on the lip of the excavation while an excavator operator was moving a road plate several inches. The operator put the road plate down, catching and breaking the employee's thumb between the excavation lip and the road plate.",1
"An employee was trying to escape a construction fire while working on the third floor. He was climbing on the exterior of the building to get to the fire department's ladder when he lost his grip and fell to the ground, breaking his legs and ankle. He was hospitalized.",1
"An employee fell while walking up an exterior staircase, fracturing his leg and requiring hospitalization.",1
"On March 7, 2018, at approximately 4:15 a.m., an employee was operating the press brake and completed the first bend. As he was performing the second bend his left thumb was pinched in the part between the two bends amputating the tip of the thumb.",0
"An employee was trimming trees in a scissor lift and attempted to pass a pole saw down to the injured employee. The cord holding the blade guard let loose and the guard snapped on the injured employee's right index finger, partially amputating it.",0
"An employee was moving an arcade machine when his middle finger was caught between the control panel door and edge, resulting in an amputation.",0
"An employee was hooking up two bundles to an overhead hoist when the operator raised the hoist, pulling up slack in the chain. The employee's thumb was then pinched and fractured between the chain and the bundle.",1
"An employee was walking to her car in the parking lot when she tripped on a stone and fell to the ground, fracturing her right wrist. She was hospitalized and had surgery.",1
"An employee was moving cows from one pen to another when a cow hit him in the leg. His leg became swollen and his leg/knee tendons were injured, requiring surgery.",1
An employee was welding tube steel above his head when a spark entered his coat and caught it on fire. He received second and third degree burns to his left arm from his elbow to his fingers.,1
An employee was reaching into equipment and caught the left thumb between the metal pulley and the rubber pulley belt resulting in amputation at the first joint.,0
"An employee was using a board hook to try to pull a crate out of a trailer, but it did not latch onto the crate. The employee pulled and fell backwards out of the trailer to the ground, fracturing a wrist and requiring hospitalization.",1
"An employee was operating a powered industrial vehicle (PIV) when he encountered another PIV that was blocking his path. When he attempted to move the other PIV, it struck him, breaking his leg and ankle.",1
"An employee was in an aerial lift when the building fell. A steel beam struck the employee, who suffered back and lung injuries.",1
"While retrieving parts from a shelf, an employee operating a cherry picker fell approximately 15 feet to the lower level, suffering a concussion and neck, arm, and leg injuries. A harness was not worn at the time.",1
"An employee slipped and fell down steps, potentially fracturing his patella and sustaining tendon injuries.",1
"An employee and co-driver prepared to pull a trailer to a dock door. Before pulling this trailer, the employee went to make sure that the trailer's door was closed. The employee ducked under to check and leaned into the adjacent bay, which was empty at the time.  Then, another driver backed a 53-foot long trailer into the previously empty adjacent bay and did not see the employee.  The employee was struck by the trailer, resulting in two broken clavicles, which required hospitalization.",1
An employee was in the process of installing a metal curb on a roof for placement of HVAC. He was kneeling and reached his hand over a floor hole cover. The floor hole cover gave way and the employee fell 18 feet. The employee suffered skull fractures as well as a broken pelvis and femur.,1
"An employee was walking in the facility yard when a boom lift ran over him, breaking his left leg and dislocating his right leg.",1
"Employees were attempting to move a crate of six granite slabs (weighing approximately 800 pounds each) from the back of a trailer using a chain. One end of the chain was tied to the mast of a forklift and the other wrapped around the bottom of the crate. Before they pulled the crate from the trailer, a strap that was holding the slabs broke, allowing the slabs to fall onto the injured employee, who broke both legs.",1
"An employee lacerated his finger while working, resulting in an amputation.",0
"An employee was reaching to grab an air freshener container for the office bathroom when an easel began to fall toward her. As she turned to catch the easel, she twisted her ankle and fell against a supply closet cart, knocking it against the shelving as she fell to the floor. She fractured her tibia and fibula.",1
"While stacking granite, an employee became pinned between a slab and a block of granite, breaking two ribs.",1
"An employee was moving a steel column onto a cart when the bar used to transport the column slipped, causing the column to fall onto the cart and then strike the employee's left foot. The employee's foot broke and suffered lacerations.",1
"An employee was welding a vessel and put his hand down in a pre-cut hole to roll the vessel. His hand was then caught in a pinch point between the wheel roller and vessel, severely cutting his left index finger, which had to be surgically amputated at the distal interphalangeal joint.",0
"An employee was conducting a presentation when she stood up and fell, fracturing her hip.",1
An employee was walking away from a bus when she missed the step at the curb and fell to the ground. She fractured her right elbow and the radial bone of her left wrist and was hospitalized.,1
"An employee was working on a 220-volt breaker when an arc flash occurred, resulting in third degree burns over much of his body.",1
An employee collapsed at their workstation during normal operations (stacking) and went into cardiac arrest.,1
"An employee was inserting a power spreader beneath a feed truck while replacing the crossbar of the vehicle. As he attempted to place the tool in the proper position, the coupler on the tool failed and discharged the adapter, striking him in the face. He sustained a laceration on his face and a skull fracture, requiring hospitalization.",1
"An employee was installing chute extensions to a cement mixer truck when his left index finger was pinched between the first and second extension, amputating his fingertip.",0
"An employee had accessed a snow-covered roof to set up roof anchors for a solar panel installation job. While he was clearing snow from the roof edge, he fell 18 feet to the ground below, suffering cracked ribs and a hairline fracture to his hip/pelvis.",1
"A crew had completed drilling a 4.5' diameter shaft for a micro-pile installation and were placing thread bar reinforcement into the drilled shaft. Two employees used pipe wrenches to hold the bar and lower it into the shaft. The first employee was holding his wrench approximately 6' above the ground and the second employee was holding his at waist height when he lost his grip on the wrench. The full weight of the bar fell on the injured employee's wrench, which pulled his wrench and hand down to the ground. His right middle fingertip was pinched between the bottom of his pipe wrench and the ground, resulting in a partial amputation to the distal phalanx.",1
"On 3/08/2018, at approximately 12:45, two employees were transferring material from one roll to another. Employee 2 pressed the jog button to advance the rolls while employee 1's hand was sitting on the fabric. Employee 1's left ring finger was then caught between the fabric and the roll or the rubber, suffering a laceration that required surgical amputation of the fingertip.",0
"On March 8, 2018, at approximately 11:00 AM, an employee got out of a front load garbage truck, closed a dumpster enclosure, and slipped and fell on ice in the area around the enclosure. The employee was hospitalized with a fractured hip.",1
"On March 8, 2018, at approximately 11:00 AM, while picking up trash at a restaurant, an employee slipped and fell onto ice, fracturing a hip and requiring hospitalization.",1
"An employee was descending down a flight of steps located in front of a residence when he tripped and fell, damaging the ligaments and tendons in his knee and leg.",1
"An employee was trying to push a piece of meat out of a press when it cycled, amputating parts of his four right fingers.",0
"An employee was standing on an aluminum extension ladder while removing house siding at approximately 10 to 12 feet above ground when the employee fell to the ground. The employee suffered a fractured collarbone and rib, requiring hospitalization.",1
"An employee was sorting construction and demolition materials on a pick station conveyor when he saw a plastic band that had fallen off the pick belt near the head pulley of the conveyor. He grabbed the band and was attempting to free it when the plastic band wrapped around his glove and right hand, breaking his thumb and index finger and cutting his thumb/hand. The conveyor was running at the time of the incident.",1
"An employee was on a flatbed truck moving steel dunnage for a powered industrial vehicle (PIV) to unload when the PIV operator came forward unexpectedly and the steel shifted, catching the employee's right ring finger. The finger was partially amputated.",0
"An employee was removing a 3-feet by 5-feet AC wood platform while on a 6-foot A-frame ladder when the weight of the platform shifted and knocked him off balance, causing his left leg to be caught between the ladder's rungs as he fell about 4 feet to the floor. He suffered a compound fracture to his left leg and was hospitalized.",1
An employee was installing telecommunication lines and fell off a ladder resulting in a concussion.,1
"An employee entered a customer's attic and was attempting to place rodent traps when he miss-stepped and fell, breaking through the ceiling. He broke his tibia and fibula and tore a tendon in his left leg.",1
"An employee was walking in a parking garage when an automobile started approaching. The employee went to step back behind a protection barrier and fell to the concrete ground, breaking a femur.",1
"An employee was under a truck using an impact wrench to remove the first of two bolts located on the carrier bearing of a driveline. When he removed the first bolt, he noticed the second bolt was stripped, but still needed to be removed to successfully remove the entire driveline. As he tried to remove the second bolt, the driveline shifted toward him in a downward motion, causing him to react and catch the driveline with both his hands and feet. He then asked a coworker to help remove the second bolt. Once his coworker removed the nut and bolt, the driveline became loose and fell on his right elbow, smashing it to the concrete and causing a fracture.",1
"An employee was troubleshooting a lift gate to identify why it was not working and had no power when the gate closed on and pinched the employee's left index finger, requiring surgery and hospitalization.",1
"An employee has just set his truck up for tree trimming and climbed the steps of the ladder to enter the basket. He noticed he didn't have gloves on so he asked another employee to toss the gloves to him. As he attempted to catch the gloves, he lost his balance and fell approximately 8 feet, 5 inches to the ground, breaking his right tibia. He was hospitalized.",1
"An employee was climbing scaffolding when he attempted to hand a kick board up to the next level. He then lost his footing and fell approximately 10 feet to the ground, fracturing his wrist and vertebra.",1
An employee was on the second step coming down from a ladder when he lost his balance and fell into a shelf on his left side. He was hospitalized with broken ribs.,1
"An employee was running a pointer machine when he attempted to manually move a steel tube from the index table into the bunk. His left pinky finger was then smashed between the index table and the tube, requiring a surgical amputation of the fingertip.",0
"An employee was attempting to clear a jam in a trash chute where it opened into a dumpster. The employee climbed into the dumpster and was removing material from around the bottom of the chute when he stepped backwards and fell over the edge of the dumpster, landing on the ground head first. He suffered head trauma, a fractured neck, and broken ribs.",1
"An employee was attempting to reset a circuit breaker when the breaker box exploded, causing second degree burns to his left arm and hand. He also received first degree burns to his face.",1
"An employee was closing the door to the paint room when it closed on the employee's finger, resulting in an amputation.",1
"An employee was performing a plug draw operation on a tube when his finger became stuck between the tube and a wood fixture, removing skin from his hand and finger.",1
"While walking into the laundry room, an employee suffered respiratory and eye irritation from airborne fumes caused by a pan being soaked in deliming chemicals.",1
"An employee was struck by a truck that was reversing to hook up a trailer, suffering back and hip injuries.",1
"An employee was operating a double pallet jack to unload a trailer when his foot struck a stationary pallet, breaking his right ankle.",1
"An employee slipped on ice and fell to the ground while walking, suffering a head injury that required hospitalization.",1
"An employee was reaching for an item while standing on a ladder in the bakery freezer when she lost her balance and fell, breaking her left ankle and requiring hospitalization.",1
"An employee slipped and fell after mopping the floor, fracturing the right hip.",1
An employee was getting tools out of a toolbox drawer when the drawer closed on the employee's right pinky finger. The fingertip had to be medically amputated.,0
"An employee was installing an inflatable blow plug into a 30-inch ADS pipe when it ruptured as he was pumping air into it, knocking him unconscious inside the catch basin. He suffered a concussion and lacerations to his upper lip and left ear, requiring hospitalization.",1
An employee was troubleshooting to find a squeaking noise beneath a conveyor in the shipping area. He was tapping on a bad bearing when his right hand was pulled into the rollers and frames. He suffered a hand fracture and was hospitalized. The conveyor was not locked/tagged out at the time.,1
"An employee was cutting a metal beam when the beam shaft fell on his left thumb, requiring a partial surgical amputation.",1
"An employee slipped on snow and fell to the pavement while walking into the building, breaking a thumb and hip.",1
"An employee was adjusting tempering rollers and cleaning belts on equipment when the employee's glove was pulled into the pulley, resulting in an amputation of the right pinky finger. The equipment was running at the time.",0
An employee was bleeding down the well in the process of plugging an abandoned well when the valve blew apart resulting in a lower left leg fracture.,0
"An employee was testing a customer's telephone line and walking back to his work truck, which was parked on the road about 50 feet away. As he walked down the steep gravel driveway, he slipped on snow and landed on his left foot, rolling his ankle and breaking his left fibula and tibia.",1
An employee was moving a dumpster from inside an apartment to the outside when he stumbled and his ankle was pinned between the curb and the dumpster. He suffered a broken left ankle.,1
"An employee was working on an overhead door while standing on a 10-foot rolling stair unit with a wheel locking mechanism.  A reversing forklift ran into the rolling stairs, which were knocked over, and the employee fell 10 feet to the ground. He broke his right elbow and his right hip, requiring hospitalization and surgery.",1
Employees were replacing the double block-and-bleed valve on an aircraft fuel check-out stand when one employee's finger became caught between the pipeline valve and the stationary pipe. The injured employee was wearing leather gloves. The left middle finger was de-gloved and later received a partial medical amputation.,0
An employee was attempting to clean a doctor's blade on a laminating machine when the blade partially amputated his right middle and pinky fingers.,1
"On or about March 9, 2018, an employee was cleaning out pipes in a trench when the trench caved in. The employee was hospitalized with a pelvic fracture and two broken ribs.",1
An employee was getting ready to light the hydrogen exiting the exhaust port on the end cap at a quartz tube furnace when the tube exploded. He received a severe laceration to his upper left arm and was hospitalized.,1
"On 3/09/2018, an employee was descending a fixed ladder after performing air conditioner work on a roof when the employee fell from the ladder to the concrete floor, fracturing a vertebra and requiring hospitalization.",1
"An employee was shoveling snow, went on a break and collapsed from a possible heart attack after returning from the break.",1
"An employee was cleaning a guest room when a dog charged at her and she jumped on the bed. She then fell off the bed, dislocating/fracturing her elbow and requiring hospitalization.",1
An employee was pushing a chair across the floor when the chair was caught on a rubber transition strip. The chair and employee then fell to the floor. She fractured her shoulder.,1
"On 03/09/2018, an employee was installing AC vents on the second floor of a residential house under construction. He opened a door to an elevator shaft and subsequently fell to the first floor, injuring his head and requiring surgery.",1
"An employee was releasing 9,500 PSI pressure by surging a 2-inch 1502 iron bleed-off line when the bleed-off iron shifted and struck his right leg, fracturing his foot and ankle. He was hospitalized and had surgery.",1
"On March 10, 2018, at approximately 2:45 a.m., a temporary employee (injured employee) was assisting another employee operating the carpet separator. The injured employee's right hand entered an unguarded area of the rotary lock system resulting in amputation of the middle finger.",0
"An employee was taking samples and reading gauges when the sight glass blew out on a flake caustic line. The blow-out caused lacerations to the employee's arm, face, and chest and chemical burns to his face and right hand.",1
"An employee was operating an electric pallet jack. A different employee had backed his lift out of a trailer and left the forks slightly raised. The employee on the electric pallet jack ran into the raised forks, striking his right leg and catching it between his pallet jack and the raised forklift forks. He suffered a compound fracture to his right leg.",1
"An employee was delivering clothing to patients when the employee's knee gave out.  The employee fell to the floor and broke the right femur, requiring hospitalization and surgery.",1
An employee was changing a die mold when the employee's finger was amputated just below the fingernail line.,0
"An employee was working on a scaffold when the scaffold fell. The employee impacted the lower surface, suffering whiplash and a concussion that required hospitalization.",1
An employee was attempting to change a blade on a knife straightener when the blade amputated half of the first digit on the employee's right hand. The knife straightener was operating at the time of the incident.,0
"An employee was operating an ATV in dusty, dark conditions when he ran into a pipe. He was thrown from the ATV and hit his head, cracking his skull and fracturing the orbital bones around his eye. A seat belt was not worn at the time of the incident.",1
"An employee tripped on a desk and fell to the concrete floor, breaking her hip.",1
An employee was turning a piece of stainless steel sheet metal when the corner of the sheet metal contacted and cut his right wrist.,1
"An employee was prepping food when she had an allergic reaction and experienced difficulty breathing, requiring hospitalization.",1
An employee was attempting to unjam material from a bag sealer when a moving part amputated the employee's left index fingertip.,0
"An employee walking in the ""pre-soak"" area slipped on ice and fractured his left leg, requiring hospitalization.",1
An employee was troubleshooting a lint cleaner machine when his left arm was caught and severely crushed by the rollers.,1
An employee was de-rigging a metal pipe while standing on a roof when the pipe touched an overhead power line. The employee then suffered serious electrical burns.,1
"A generator was being replaced on a drilling rig. The 3700 pound generator was lifted and held with a chain attached and carried by an all terrain forklift. While the injured employee was pushing the generator with two other employees, the chain holding the generator slid from the forks of the all terrain forklift and fell backwards onto the employees. The injured employee sustained rib fractures.",1
"An employee was placing bags on the belt loader at an airport ramp when his jacket sleeve was sucked in by the running belt on the belt loader. He attempted to remove his sleeve with his other hand and was caught by the belt, which removed skin and damaged the tendons on his left hand.",1
"A temporary employee was cleaning the discharge chute on a seed cleaner when his hand came into contact with the moving chain, lacerating his right index and middle fingers and fracturing his index finger. He was hospitalized.",1
"An employee was helping to take containers off the back of an aircraft when he fell off a ladder and broke his wrist, requiring surgery.",1
Two employees were involved in a physical altercation at the work site. One employee suffered a broken nose and was hospitalized.,1
"An employee was rolling a non-mag drill collar on a paint rack when the collar started rolling toward him. He tried to stop the collar with a rag and the collar rolled over his right hand, resulting in a right thumb amputation.",0
An employee was replacing a submersible well pump and pulling out a pipe when a wire that was connected to the pipe wrapped around and amputated his left pointer finger at the first knuckle.,1
"An employee was teaching a beginner skier how to get off the chairlift. While unloading off the lift, the beginner skier and the employee became tangled up. The employee then fell on the ground and fractured his hip.",1
"Two employees turned at the same time and stepped on each other's feet. One of the employees then fell to the ground and injured her knee, requiring hospitalization and surgery.",1
"On March 12, 2018, an employee was installing roof decking on an addition to a school. The employee was in the process of landing the leading edge of the steel decking when they stepped on an unsecured piece of decking material causing it to shift. The employee fell 14.8 feet to the ground below and fractured both hips.",1
"An employee was closing a vehicle door when the door closed on his right hand, amputating his ring finger.",1
An employee exited his vehicle and was standing in the median when he stepped backwards and tripped on the curb. He fell to the ground and broke his left humerus.,1
"An employee was trying to grab a box overhead while on a step ladder when he lost his footing and the step ladder tipped over. He fell to the concrete floor, lacerating both elbows and breaking his left elbow. He was hospitalized and had surgery.",1
"An employee was operating a dozer when he was thrown out of the seat and into the roof of the dozer, fracturing his neck. A seat belt was not worn at the time.",1
"An employee was feeding stock into a punch press when he lost his footing and his hand entered the press as it cycled, amputating four fingers.",0
"While walking in an area where hot water was on the ground (approximately 1 inch deep), an employee tripped and landed in the water, sustaining second and third degree burns to the hands, knees, forearms, and hip.",1
"An employee was using an outrigger for balance while he used his foot to clear snow from the area where the outrigger foot would sit. While the employee's hand was on the outrigger, the outrigger activated. The employee's right index finger that was inside a pin hole when it moved resulting in amputation.",0
"An employee was walking by some crates/boxes that were stacked in the yard when a huge wind gust blew one of the top crates off the stack. The crate struck his head, left shoulder, and left rib cage area and knocked him to the ground. He suffered broken ribs, a mild concussion, and a bleeding spleen, requiring hospitalization.",1
"An employee 's hand was pulled into the in-running rollers on a cold press gluing machine while she was cleaning it, causing significant skin abrasions.",1
"An employee was performing routine maintenance on a discharge conveyor belt when another employee activated the machine. The employee was then thrown into the moving conveyor, breaking several ribs. The machine was not locked/tagged out at the time of the incident.",1
"An employee was filling a water trough when he was run over by a cow, dislocating his elbow.",1
"An employee slipped on a substance on the floor and fell, hitting his back and head. He became nauseous and vomited, and he was hospitalized with a back injury.",1
"An employee was pinned between a customer's truck and an alignment rack, suffering four fractured ribs, multiple bruises of the body, and a hematoma to the liver. The employee was hospitalized.",1
"An employee was performing sampling in the pulp mill area when the employee slipped on a puddle of water and fell to the ground, dislocating a shoulder and requiring hospitalization.",1
"An employee fell on black ice while walking into the building, breaking a femur.",1
"On March 12, 2018, an employee was stuffing metal liners into media packs and placing them on a conveyor line when the employee attempted to adjust an element that was on the conveyor. The employee's left middle fingertip was then pinched between the end of the element and a step crossing over the conveyor, amputating the fingertip.",0
"An employee was mixing acrylic purge with a mixer when the mixer drum tipped. He attempted to catch the drum and stand it back up. While he was standing it back up, his left thumb was crushed between the mixer drum and the stand, resulting in a partial amputation.",0
"An employee fell while dismounting his truck and struck his head on the ground, requiring hospitalization.",1
"An employee was using his hands to pull out one roll of underlayment roofing material from a middle pallet (in a stack of three) when the middle and top pallets fell down and knocked him on the floor. He fractured a foot and femur, requiring hospitalization.",1
"An employee was delivering a client to an airport terminal when he fell and hit his head on the ground or curb, suffering head trauma.",1
An employee delivering mail was attacked by a dog and knocked down. The employee sustained an injury to the right ear.,1
An employee was examining a standpipe that had been disconnected when a standpipe valve struck and cut the employee above the eye.,1
"An employee was loading new tire tread in a press when the employee's right gloved hand was caught between the roller and conveyor, injuring the right arm.",1
"An employee was using a bender machine to bend a short pipe when his right hand was caught in the equipment, amputating one of his fingertips.",0
"Two employees were breaking a seal between the pulverizer and the pyrite seal box using a prybar. Once the seal was broken, a five-inch gap was left between the two. The injured employee's left hand was in the gap between the pulverizer and the seal box. As they slid the box, it dropped three inches off the shims and onto the injured employee's left hand resulting in an open fracture and amputation of the pinky fingertip.",0
"An employee was walking into a housing unit when the metal door shut on and crushed the fourth digit of the employee's left hand, resulting in a partial amputation.",0
An employee's thumb was smashed in a press machine.,1
"An employee was flying to a training and fell down an escalator at the airport, breaking three ribs and lacerating a knee. The employee was hospitalized.",1
"An employee was walking toward an oxygen cylinder to adjust the regulator when an oxygen hose burst and ignited, burning the employee's right forearm.",1
"An employee was on the lid table to help wrap chain around a tank, lost balance and fell approximately three feet through an opening in the lid table striking their head.",1
"An employee was removing a roll shaft from an expired roll of paper. The employee put the other end of the roll shaft into the new roll to use the weight to free the old core. When the core came free, the shaft going into the roll pinched the employee's finger between the core and the roll shaft, resulting in amputation of the right middle fingertip.",0
"An employee fell from a ladder to the ground, striking a metal garbage can and injuring his rib cage.",1
"An employee was attempting to turn a standup tractor, but the tractor kept going straight, causing the employee to tumble and fracture a leg.",1
"On March 12, 2018, at approximately 12:00 p.m., an employee was walking to the break room when a turret truck ran over the employee's left foot, fracturing it and requiring hospitalization.",1
"An employee was cutting a piece of board with a table saw when the wood kicked back and he came in contact with the blade. His hand was severely lacerated, resulting in a left middle fingertip amputation at the hospital. The saw was unguarded at the time.",1
"An employee was working inside a trench approximately 3 feet deep. An excavator was working above him when the weight of the excavator caused one of the trench walls to fall, pushing the rebar cage into the employee and striking his abdomen. He was hospitalized with abdominal bleeding.",1
"An employee was struck by a vehicle while walking from one building to another, suffering left elbow and ankle fractures, as well as a concussion. The employee was hospitalized.",1
"An employee was making a connection with a drill pipe and had a hand around the pipe when it moved into an iron roughneck. The employee's right pinky finger was caught between the iron roughneck and pipe, amputating the fingertip.",0
"An employee was walking out of a restroom when she tripped and fell, breaking her arm and requiring hospitalization.",1
"While prepping a bucket truck, an employee slipped and fell to the snow-covered ground. The employee's head hit the ground, suffering a skull fracture.",1
"An employee was installing a side quest saddle tank axle bearing on a tractor when the tractor tire tipped over and struck the employee's lower left leg, breaking it.",1
"An employee was walking down the stairs when she tripped and fell, breaking her ankle.",1
An employee was helping a delivery person put a 70-pound box on the ground. His foot got caught in a pallet and the employee fell to the ground resulting in a right hip fracture. He was hospitalized.,1
"An employee fell from a roof to the ground, suffering broken ankles and requiring hospitalization.",1
"An employee was trying to unjam a skewed piece of wood panel from a press when the press door unexpectedly closed on his left hand, resulting in fingertip amputations to his index and ring fingers and a 1-inch amputation to his middle finger.",1
An employee was operating a machine when the employee's right middle finger was caught and amputated in the machine's moving parts.,0
An employee was assisting with grinding operations and got a hand caught in the grinding wheel resulting in a partial amputation of the left index and middle fingers.,0
"An employee was cleaning an air valve in the wash room when his finger slipped off the release button and the valve closed on his finger, amputating his right index fingertip.",0
"An employee was using a hoist to lift a basket weighing about 500 to 600 pounds when the basket fell about 36 inches onto the employee's right leg, breaking it.",1
An employee was using an iron worker to cut a piece of metal and partially amputated the left thumb.,1
An employee was cleaning the feed conditioner when his left index finger was caught in the rotary valve in the feed cyclone resulting in a fingertip amputation. The machine was not locked out or tagged out at the time.,0
"An employee was moving a trailer from the blasting area to the paint shop using a hook attached to a trolley. The hook disengaged from the trailer, allowing it to fall on and break the employee's right ankle. The employee was hospitalized.",1
An employee was machining holes into a piece of channel flange when the employee's finger was pinched and then amputated.,0
An employee was sanitizing equipment when a moving belt caught and crushed the employee's right hand (first three fingers). The equipment was not locked/tagged out at the time.,1
"An employee fell while walking a horse. The horse then fell on top of the employee, breaking a bone in his back.",1
An employee was adjusting a pipe underneath a vault. His hand was close to an aluminum skid when the vault was lowered. His left index fingertip was then caught and amputated between the iron pipe and the skid.,0
"An employee slipped and fell while walking down the icy office steps, breaking his hip.",1
"An employee was operating a ham skinning machine when a ham became stuck on the roller skinners. The employee was attempting to pull the ham back when the skinners on the machine regained traction and pulled the ham into the machine. The employee's right index finger became caught between the ham and the skinner blade, partially amputating the fingertip.",0
"On March 13, 2018, at approximately 9:00 a.m., an employee was using a crane to unload a 6x6 concrete box when the crane became unbalanced and rolled over, pinning and crushing the employee's legs under the fuel tank. He was hospitalized.",1
"An employee fell off the bottom rung of a ladder while retrieving a part from a shelf, landing on a tape measurer hanging from his belt and breaking his hip.",1
An employee was taping a box cutter to lathes to test the thickness of force mains when the box cutter cut off his thumb tip.,0
"An employee was adjusting the sliding support on a trailer (150 pounds) when the employee's right index finger was caught between the slide and trailer, resulting in a right index fingertip amputation.",0
"An employee was using a forklift to load a bundle of steel plates onto a trailer that had wood timbers installed on it. He tried to reposition the timber with the forklift and then with his hand. He bumped the forklift controls and his right hand was caught, resulting in a right middle fingertip amputation.",0
"An employee was using a hand grinder when part of the grinder wheel blade came loose and struck his right eye, puncturing it and requiring hospitalization. The grinder was guarded a the time.",1
"An employee was unjamming a log from the ""kicker"" when the log fell on the employee's right index finger resulting in amputation.",0
"An employee was removing shirts from a conveyor belt when the employee's left hand became caught between the conveyor belt and guard, resulting in a partial index finger amputation.",0
An employee was loading a nitrogen bottle onto a cart. The bottle fell and crushed the employee's finger resulting in amputation.,0
"An employee was trying to catch his glove, which had slipped off his hand, when his hand was caught in a conveyor. His middle finger was partially amputated.",0
"An employee was propping a door open to sign for a mail delivery. As the employee was standing against the door, the door moved and pinched the employee's hand. The employee quickly pulled the hand away from the door, which resulted in a partial amputation to the left middle fingertip.",0
"An employee slipped on ice in the parking lot and fell, breaking a leg.",1
"An employee was standing near a skylight on a roof while setting up equipment when a gust of wind pushed him. He then fell through a skylight approximately 18 feet to ground level below, suffering an amputation.",0
"An employee was climbing onto a flatbed truck to retrieve materials when he hit and lacerated his head on a steel member of the parking garage, requiring hospitalization.",1
An employee was inserting a part into a manufacturing machine when the employee's left index finger was pinched and amputated by the machine's plunger.,1
"An employee was using a scrub pad to clean the drip tray underneath two moving rollers when the employee's right hand was pulled into the rollers, causing soft tissue damage to the right middle, ring, and pinky fingers.",1
"An employee was attending a tag line while a forklift was lowering a steel joist to the ground when the joist fell from the forklift and struck the employee. The employee suffered broken ribs, a perforated lung, and a broken leg.",1
"An employee was removing a piece of paper that was stuck in an offset press when the employee's finger was pinched in the rotating rollers, resulting in a fingertip amputation.",0
"An employee was moving a file cabinet and the cabinet fell back towards the employee, amputating the tip of the employee's right middle finger.",0
"While picking an order from a ladder, an employee received an electrical shock and fell from the ladder. The employee suffered difficulty speaking, shaking, and difficulty walking, requiring hospitalization.",1
"An employee was servicing an overhead garage door system and operated the door via remote. The door struck the ladder, causing him to fall approximately 15 feet to the floor. He fractured his left ankle.",1
"An employee was working on a ladder, installing insulated metal panels, when he lost his balance and grabbed a metal stud to keep himself from falling. The metal lacerated his left-hand fingers, requiring stitches and hospitalization.",1
"While working on a sterilizer, an employee opened the damper door and came into contact with steam, suffering burns to the hands and face. The employee was hospitalized.",1
"An employee was in a scissor lift applying plastic sheeting to redecorate the walls of a shop when the employee fell 6 feet from the lift to the cement floor, suffering a head injury that required hospitalization.",1
An employee was checking for car engine noises while a second employee was moving the steering wheel when the engine lacerated the first employee's left hand.,1
"An employee was pushing a piece of stock through a double miter saw when the stock stopped. The employee's left hand continued to move forward and went under the guard, contacting the two 12-inch saw blades. The employee's left middle and pointer fingers were amputated.",0
"An employee finished using a vehicle-mounted boom arm/crane to load clean-out tubs and was retracting the stabilizers when he was caught between a stabilizer and the truck. The employee's spine, mid-torso, and abdomen were crushed, causing internal injuries that required hospitalization and surgery.",1
"An employee was measuring the depth of a hole when the employee fell into the hole and hit the ground, suffering a broken pelvis, arm, back, and ribs.",1
"An employee was on the ground talking to an aerial lift operator when the operator lost sight of the employee and ran over her ankle, fracturing it.",1
"An employee was reversing a stand-up forklift when her left ankle was smashed between the forklift and a parked aerial lift. She suffered an ankle avulsion and contusion with broken skin, requiring hospitalization.",1
An employee was operating a hand-powered industrial forklift jack when his left thumb was smashed and fractured between the control handle and a cooler door. He was hospitalized and had surgery.,1
"An employee was working from the ground cutting logs with a gas-powered chain saw when the chainsaw lacerated his left foot, severing a tendon. He was hospitalized.",1
An employee suffered a right thumb amputation while changing the belt on a pulley that drives a conveyor auger.,1
"An employee was physically beaten by a patient including having a pot of boiling water thrown at her. The employee sustained a concussion, third degree burns and facial lacerations requiring sutures.",1
"An employee was on a ladder putting up masking for painters when he lost his balance. The ladder kicked and he fell to the ground, injuring his right wrist.",1
"An employee fell on ice in the parking lot, breaking the left patella and requiring hospitalization.",1
An employee was using a hand drill when the drill bit broke and a chip flew into his eye. He was hospitalized. Safety glasses were worn at the time.,1
"An employee was descending a ladder in the produce cooler when she missed the bottom rung and fell, striking her head and left knee on the floor. She was hospitalized and had surgery.",1
"An employee slipped and fell on snow and ice in the company parking lot, suffering a head injury (brain bleeding).",1
"An employee was using a rag to clean grease from the bottom roll of a laminator when a moving roll grabbed the rag and pulled the employee's fingers into the roll. The employee's right index finger had to be surgically amputated at the first joint, and the right middle finger had to be surgically amputated at the second joint. The laminator was running at the time of the incident.",0
"An employee was operating a die stringer machine when his right hand entered the area between the die holder and the capstan. A wire then pulled the employee's middle fingertip, resulting in an amputation. The area between the die holder and the capstan was unguarded at the time of the incident.",1
"An employee slipped while walking on a scaffold. The employee was ducking under a beam and fell approximately 10 feet between the walk plank and the stock plank. The employee hit the full planked area below and then fell from there, suffering a broken pelvis.",1
"An employee was walking from a loading dock to his tractor when he slipped on ice and fell to the ground, fracturing his right femur.",1
"An employee was coming down a ladder after inspecting a roof and was four rungs from the bottom when he lost his footing and fell to the ground. He landed on his buttocks and hurt his lower back, requiring hospitalization and surgery.",1
"An employee was trying to remove a door that was stuck in an equalizer machine when the door kicked back and struck the employee's abdomen, causing internal bleeding.",1
"An employee reversed a standup forklift into a racking system and was caught between the lift and the rack, suffering a broken hip that required hospitalization.",1
An employee was taking electrical measurements from a battery interface board when it caused an arc flash. The employee suffered second degree burns to the left hand and first degree burns to the right hand.,1
A temporary employee was drilling holes on a sub frame while wearing gloves when the employee dropped a screw in the machine. He tried to pick up the screw with his left hand and the machine caught the glove pulling his hand into the machine amputating his left pinky fingertip.,0
"Three employees were installing a battery cabinet when it fell over and landed on one of them. The employee suffered a fractured pelvis and torn ligaments, requiring hospitalization.",1
"An employee was dismounting from a modular scaffold that was approximately 28 inches high when he landed on the edge of his foot, which then rolled underneath him, breaking his right ankle.",1
"An employee was loading a part onto a slotter when the part began to fall off of the holding fixture. While straightening the part out on the fixture, the employee actuated the slotter with her other hand. Her right index fingertip was then caught and amputated between the vice fixture and the part.",0
"An employee was on a catwalk when it broke loose at the mounting points, causing the employee to fall 12 feet to the ground and suffer a shoulder injury.",1
"An employee was manually releasing the hand brake on a trolley when his left pinky finger was pinched between the trolley and a rail, resulting in a partial amputation.",0
An employee was helping another employee lift a box when the weight shifted in the box and he felt a pinch in his back. He was hospitalized with a lower back strain.,1
"An employee was on a ladder connecting a fire alarm conduit when the employee fell backwards off the third rung to the ground, suffering a concussion, swollen left eye, and broken ribs.",1
"An employee was walking up a staircase when he slipped and fell, breaking a leg.",1
"An employee slipped on a fork after leaving the dishwashing area and suffered a femur fracture in the hip/thigh area, requiring hospitalization and surgery.",1
"An employee was mixing cleaning chemicals to clean a filter when sodium hydroxide splashed in his face, causing skin and eye irritation.",1
"An employee was filling molds with molten lead. When he turned a valve to open it, the line split and sprayed him with the molten lead, burning his abdomen and right arm.",1
"An employee was working on a overhead exhaust fan when his left pinky finger was caught between the belt and pulley, amputating his finger. The fan was in operation at the time of the incident.",0
"An employee was removing a rock from a mixer when the employee's finger was caught in a pinch point in the vein feeder housing, resulting in an amputation.",1
"An employee walked in front of an operating concrete/asphalt saw cutter. The employee's foot contacted the 36"" saw blade resulting in amputation of the employee's toe.",0
"An employee was getting ready to put an insert inside a distribution panel when an arc flash occurred. He sustained first, second, and third degree burns to the face, legs, arm, and stomach.",1
An employee was repairing a tractor tire when the tire rim failed. The employee suffered a broken arm and a hand injury.,1
"An employee tripped over his feet while vacuuming and fell, landing on and breaking his right hip. He was hospitalized and had surgery.",1
"An employee was standing in a work zone next to his sweeper truck that had just been filled with water from a water truck parked adjacent to it when a vehicle driving the wrong way entered the work zone and collided with the trucks. The employee was struck by the vehicle and/or debris from the struck vehicles and suffered a broken leg, bruises, and road rash.",1
"While in a trench taking a material survey for the next day, an employee was struck by a 1,000-pound electrical panel and caught between the panel and trench wall. The employee sustained multiple rib fractures on both sides, as well as a lacerated liver and spleen.",1
An employee was surveying a building to determine the routing of fiber for a communications installation when he stepped into a ditch that was unmarked and fractured his left knee.,1
"An employee was adjusting a dock leveler that was jammed when a third-party employee stepped on the dock plate, causing it to drop on the employee's right hand. The employee suffered a partial amputation of the right pinky and ring fingers, requiring surgery.",1
An employee was unloading mail from a vehicle to a cart when a gust of wind blew the cart over and caused the employee to lose her balance. She fell to the ground and broke her hip.,1
"An employee was walking through a swinging door when her right pinky finger was caught in the door hinge, amputating her fingertip.",0
"An employee was using a table saw when the employee's finger contacted the blade, resulting in an amputation.",0
"An employee was preparing to dig a sump underneath a residential home while wearing personal protective equipment when he suffered from heat exhaustion, requiring hospitalization.",1
"An employee was performing maintenance on a pump. While pressure testing the pump before returning it to service, he was splashed with 93% sulfuric acid, receiving chemical burns to his thigh area and requiring hospitalization.",1
"An employee slipped on hot floor wax while lifting boxes, receiving third degree burns to the upper back and shoulder.",1
An employee was attempting to push an AC unit that was stuck on a conveyor elevator down with her foot when one of her right toes was caught between the elevator and the framework as the elevator was descending.,1
"An employee entered a machine area to clean the concrete agitator. As the employee was cleaning the agitator, a hose caught the gate. The gate shut and the machine reset. When the machine resets, the agitator moves slowly. The employee's right foot was caught between the agitator and the base box in the machine, requiring hospitalization and surgery. The agitator was guarded and not locked out at the time of the incident.",1
"An employee was removing packaging from a block of frozen meat when the block tipped and pinched the employee's fingertip between the block of meat and the table, resulting in a fingertip amputation.",0
An employee was at a meeting and received gun shot wounds.,1
An employee slipped on ice outdoors and broke his ankle.,1
"A n employee was mounting a tire when it blew up, breaking the employee's arm.",1
An employee was at a job site and was struck by a car resulting in amputation of his left leg.,1
"An employee fell approximately 3 feet from a scaffold ladder to the ground while climbing, suffering a broken pelvis.",1
"An employee was helping to load a dump truck with construction debris when, unbeknownst to him, another employee lowered the truck's lift gate. When he attempted to walk backward out of the truck, the lift gate was no longer there to support him and he fell 3.5 feet to the lift gate below, fracturing his L1, L2, and L3 vertebrae.",1
"An employee was walking on the path to the office, slipped on ice and fell resulting in a torn muscle in the left knee.",1
"An employee was troubleshooting the hydraulics of a work station. He was underneath the station looking at the line when the steel station fell on him, causing head trauma.",1
"An employee was preparing a road for asphalt paving when a nearby forklift operator put a forklift in neutral and exited the cabin. 
The forklift started to move forward and struck the employee, pinning him between it and a pile of soil. He injured his lower back and was hospitalized.",1
An employee was trying to clear a jam in a snow blower when the augers amputated the employee's finger.,0
"An employee was entering a chicken meal silo to perform a 6-month cleanout when the silo sweep arm activated while the employee was inside. The employee's lifeline became tangled in the sweep arm, and the employee was pulled into the sweep arm and auger, suffering fractures and soft tissue injuries to the left scapula and humerus.",1
An employee was one of several workers moving a large motor when the motor slipped and pinned the employee's foot against a wall. The employee sustained several broken bones in the left foot and ankle.,1
"An employee was using an overhead crane to move a bundle of metal piping. As he lowered the load to the ground, the strapping came loose, allowing the piping to fall on and break his leg.",1
"On March 15, 2018, at approximately 11:05 a.m., an employee complained of chest pains while working in the receiving department, transferring cardboard boxes that weighed 50 lbs. or less to wooden pallets. The employee was hospitalized for a possible heart attack.",1
"An employee was troubleshooting a problem with a chemical pump. During a fracturing operation, the employee disconnected a chemical hose that was under pressure. Chemicals released and entered the employee's right eye, causing a chemical burn.",1
"An employee was holding a nail gun as he placed plywood down to get cut. He then stepped on a rail, lost his balance, and fell. As he fell, the nail gun shot a nail into his right knee, requiring hospitalization.",1
"An employee tripped over a telephone cord at the foot of a bed, injuring the right knee and leg.",1
"An employee was attempting to open a malfunctioning locking mechanism on a hydraulic car lift when his left second finger was pinched between the mechanism and the lift frame, resulting in a distal amputation.",0
An employee fell on icy stairs and broke a leg.,1
"An employee was feeding material into a press when his left hand was caught in the press clamp, partially amputating his index and middle fingers. He was hospitalized.",1
"An employee was on a roof walking toward a ladder to get down when he stepped on a tile that broke off. He then lost his balance and fell 8 to 10 feet off the roof to the ground, breaking his arm.",1
"An employee was using an electric router to shape rough-sawn lumber. The router engaged the employee's right wrist and forearm, causing deep lacerations to the muscle, tendons, and bone.",1
An employee was on a metal A-frame ladder moving conduit above a false ceiling and fell off the ladder fracturing his cheek and neck.,1
"An employee was on a catwalk performing a clutch check. While stepping off the catwalk, the employee fell approximately 8 inches to the concrete floor, striking the right elbow and right hip.",1
"An employee had taken all parts and tools off a steel drop table. One half of the drop table rested partially on the other half of the drop table. When the employee closed the door near the drop table pieces, the vibration caused one piece of the drop table to slide and fall onto the employee's left foot, breaking several metatarsal bones.",1
An employee was using a band saw to cut angle iron when their glove was caught in the saw blade resulting in amputation of the right index finger.,1
"On 3/16/2018, at 2:49 PM, an employee was helping a second employee move a large plastic part. The second employee was holding a knife at the time. The first employee's left wrist contacted the knife, severing an artery. He was hospitalized and had surgery.",1
An employee fell off a scaffold and suffered a head injury.,1
"An employee was assisting a patient when she tripped over an extension cord from a surgical compression device and fractured her hip, requiring hospitalization.",1
"While participating in running exercises, an employee suffered a shin splint, requiring hospitalization.",1
An employee was operating a saw when it amputated his left index and middle fingers.,0
An employee was working in a walk-in freezer when a powered industrial truck hit and dragged him against an upright beam. He suffered a contusion to his lower back and was hospitalized.,1
"An employee was attempting to remove a part from a press when the die cycled on the employee's left hand, severely cutting two fingers and requiring hospitalization.",1
"An employee was operating a stand-up reach truck while pulling products (order) from a racking system. As he reversed the stand-up reach truck, his left forearm was caught between a metal storage rack and the body of the reach truck, requiring hospitalization and surgery.",1
"An employee was operating a paint machine when the pistons became stuck, so he applied lubricant oil to make them come loose. He was cleaning near the piston by hand when the piston suddenly came loose and caught the his right index fingertip, amputating it.",0
An employee picking product in warehouse when another employee's pallet jack rolled back and hit the employee. The employee suffered a right ankle fracture.,1
The injured employee was removing chicken cages from the truck using a forklift when the truck pulled away causing the forklift to tip over breaking the employee's left leg.,1
"An employee was trying to move a 500-pound mold for a vertical hydraulic press when the mold slipped and fell. As he tried to catch it, the mold crushed his left hand, resulting in the amputation of his left index fingertip and possibly middle fingertip.",0
"An employee was working behind a fork truck when the truck's rear right tire struck the employee's left leg, breaking two bones.",1
"An employee was pumping water down tubing to get mud back to a frac tank. When the pump pressured up, the inner rubber of the hose came apart, plugging the hose and causing it to blow out of the tank. The hose then struck the employee's wrist and chest.",1
"While shoveling concrete debris into the bucket of a mini-excavator, an employee was pinned between the bucket and an existing pier face. The employee sustained a leg injury with lacerations and possibly broken bone(s).",1
"An employee was standing by a frame machine (pulls automotive body and frames) while his co-worker was operating it when the machine's hydraulic tower (8-foot, L-shaped machine part) came off and hit the employee's right upper arm, breaking it. He was hospitalized.",1
An employee was clearing a jam from the blow molding machine and amputated the right index fingertip.,0
"An employee was prepping window frames from an extension ladder when the ladder slipped from the wall. The employee then fell 6 to 8 feet to the ground, fracturing the left elbow and pelvis. The ladder was unsecured at the time of the incident.",1
"A temporary employee was removing a metal plate off a truss when a piece of metal flew into his eye, causing a serious injury.",1
"On March 16, 2018, an employee was unjamming a pallet. The hand movement triggered the electronic eye to load another pallet and the employee's left hand was caught between the two pallets, resulting in a fracture and fingertip amputation of the fifth finger requiring surgery.",1
An employee was modifying the scoreboard at a stadium. The employee was attempting to re-spool the cable on the drum of the hoist. He was guiding the cable with his left hand and operating the hoist by the pendant remote with his right hand. His glove was caught on the cable and the cable pulled his hand into the hoist resulting in the amputation of the right index finger and an avulsion injury to a second finger.,0
"An employee was in a road work zone using a measurement wheel to determine how many feet of temporary pavement markings were painted when a pickup truck struck him resulting in a broken wrist and leg, requiring hospitalization.",1
An employee was struck by an auxiliary chain that was used to hook up a ladle to an overhead bridge crane for transport.,1
The injured employee was extracting the drill string from the well bore (tripping out of the hole) and was struck by the drilling slips when the drilling string rotated resulting in a broken left leg.,1
"On March 17, 2018, at approximately 7:00 p.m., an employee was attempting to clear debris from an auger when it lacerated and fractured the employee's right hand, requiring hospitalization. The auger was running at the time of the incident.",1
"An employee was walking to his truck when he was run over by a truck, suffering neck, left leg, skull, face, and jaw fractures.",1
"An employee was removing folding wings from the bridge of a loader when the folding wings fell and hit his left thumb, causing a partial amputation of the thumb tip.",0
An employee was inspecting and photographing a running dough divider machine when the employee's left ring finger was caught and amputated in the moving parts.,1
"An employee was pulling a manual pallet jack when he slipped on the floor and his right ankle was struck by the pallet jack, fracturing it.",1
"An employee was attempting to close a valve on a milk transfer line when the valve snapped shut under pressure, closing on and partially amputating the employee's right ring fingertip.",0
"Two employees had just finished installing a replacement sand bucket conveyor. One employee was adjusting the conveyor when the employee's arm was caught between the bucket and the door frame/opening to the elevator door. The employee's arm then hit the jog button, causing the moving conveyor to lift the employee to a point where the jog button was disengaged, stopping the belt. The employee suffered a deep laceration and broken arm, requiring hospitalization.",1
"While trimming flash from a plastic pallet, the knife slipped and stabbed the employee's thigh.",1
"An employee was operating a standup forklift while putting parts up on a conveyor line. He was backing up when the forklift appeared to speed up and move toward some stairs. He attempted to stop the forklift using his left foot, but his foot was caught and fractured between the standup forklift and the stairs.",1
An employee was performing unloading activities when a 4-inch cap flew off an undrained vent-and-fill line and struck the employee's head.,1
"An employee was standing next to a flatbed trailer. A load of steel rails had just been hoisted onto the bed of the trailer. When the steel was unlashed from the crane, two pieces fell off the bed and struck the employee. The employee sustained toe amputations on one foot and trauma to the head, hands, abdomen, and feet.",1
An employee was poking at a sprocket on a machine from a ladder when the sprocket amputated his index fingertip.,1
"An employee was changing a roll of shrink wrap when his right pinky finger was smashed between the roll of shrink wrap and the bracket where the roll sits, resulting in an amputation to the first knuckle.",0
"An employee was moving magnets when two of the magnets were drawn together and crushed his fingertip, resulting in a partial amputation.",0
An employee was running to respond to a patient's body alarm when she slipped while trying to avoid a chair in the hall and fell to the floor. She fractured her right hip and injured her right shoulder.,1
"An employee was pulling orders while riding a powered pallet jack down an aisle when his left foot was crushed between the pallet jack and an adjacent rack support, fracturing his left heel.",1
"An employee was on a ladder getting shipping supplies. He placed his hand on a shelving unit to brace himself. When he stepped off the ladder, his left middle finger was caught and ripped off between a brace and the shelf.",1
"An employee was riding a horse when the horse went down and the employee landed on his shoulder, breaking his left arm.",1
"An employee was waiting as paper was being fed off a spool at the end of a paper reel into a dry end pulper. As the paper on the spool came to an end, the employee stepped onto the moving paper. As a result, his feet came out from underneath him and he fell fracturing his pelvis.",1
An employee was removing a bushing on a transformer when the transformer's turret slid and he tried to catch it. The turret then amputated his right ring finger.,0
"An employee was helping to install low-profile concrete barrier walls when his left hand was caught between barriers, fracturing his pinky finger and lacerating his hand. He was hospitalized and had surgery.",1
"An employee was operating a hammer drill when his work glove was caught in the drill bit, resulting in a left pinky finger amputation.",1
An employee was exiting a truck and fell fracturing the right arm.,1
"An employee was physically assaulted by a customer while standing in the dining area, suffering a fractured skull.",1
"An employee was walking behind a cash wrap when her foot became caught on a bag handle that was sticking out, causing her to trip and fall. She broke her left hip.",1
"An employee was operating a reach truck and orders and labels began to fall off the dash of the reach truck. When the employee reached out with the right hand to catch the papers, the employee struck the cross beam of the fixed rack on the reach truck fracturing the little finger.",1
"An employee was rolling a propane cylinder when his left pinky finger was caught on the cylinder and fractured, requiring surgery and hospitalization.",1
"The injured employee was doing construction work from scaffolding. The scaffolding tipped over injuring the employee's arms, chest and legs.",1
"An employee was ascending a fixed ladder and opened a roof hatch. The roof hatch then slammed on his hand and broke his finger, causing him to fall approximately 8 feet, where he broke three vertebrae in his back.",1
"An employee was drilling a hole into a wall from a 3-foot ladder when he pulled the drill back and lost his balance, falling off the ladder and injuring his right heel.",1
"An employee was operating a pallet jack when he collided with a second pallet jack, breaking his right leg and requiring hospitalization.",1
"An employee was cutting pork loin chops on a bone-in band saw when the bone slipped from his grip. When the bone hit the saw, it caused his right index finger to hit the saw blade. When he pulled his index finger back, the saw caught his middle finger diagonally from the top joint upwards to the fingertip. He received an amputation of the distal half of the distal phalanx of the right middle finger and a soft tissue avulsion of the tuft on the index finger.",0
"An employee was climbing into a semi cab when he slipped and rolled his ankle, resulting in a fracture.",1
An employee was driving a tractor trailer in the truck yard when it rolled into a ditch. The employee fractured a vertebra and was hospitalized.,1
"On March 19, 2018, at approximately 5:41 a.m., an employee was stocking shelves while standing on two milk crates that were stacked on top of each other. The employee fell off the top milk crate and struck the bottom crate with their chest, suffering cracked ribs and a lung contusion. The employee was hospitalized.",1
An employee was operating a powered industrial truck to transport pallets when he engaged in a collision avoidance maneuver and his left foot was caught between the powered industrial truck and a beam. He fractured three toes.,1
An employee was offloading material from inside a tractor trailer using a forklift. The employee was backing out of the trailer when the tractor trailer pulled away from the loading dock. The employee and the forklift fell to the ground. The employee suffered a broken jaw and broken bones around the eye socket.,1
"An employee fell approximately 4 feet from a loading dock while pulling a tool cart. The cart landed on his leg, breaking his right femur.",1
"Employees were disassembling a blowout preventer. During the process, one of the employees was attempting to investigate a blockage when the 500-pound BOP dropped onto his right arm between the wrist and elbow. He received a laceration and a fracture, requiring hospitalization.",1
"An employee was pushing a piece of wood into a joiner when the employee's hand slipped into the machine action, resulting in an amputation of the right thumb and right pinky finger.",0
"An employee was standing on top of a mobile crane's stabilizer, calibrating the boom while holding onto part of it with his hand. The boom came down and started to pinch his fingers. When he pulled his hand out, he lost his balance and fell about 9 feet to the ground, breaking both legs (a compound fracture to one leg). He was hospitalized.",1
"An employee was troubleshooting why a suction cup plate assembly was binding up. To do this, the employee cycled the machine to see what component on the suction cup assembly was creating the binding. As he grabbed the plate to make a manual movement, the suction cup plate was freed, allowing his left thumb to contact the housing of the plate cylinder. His left thumb tip was smashed between the plate and the cylinder housing. When he pulled his hand back, it removed the very tip of his thumb.",0
"An employee was attempting to clear a jam in a 2,000-pound polyester fluff separating drum when the employee's left arm became entangled in the drum's spikes. The employee's entire left arm was amputated. The drum was moving at the time of the incident.",0
"On March 19, 2018, at approximately 9:30 a.m., an employee was inspecting the hoist wire rope on the drum of an 85-ton crane. While standing on the crane deck, the employee slipped, fell, and grabbed the drum, which pinched the employee's right index fingertip, resulting in an amputation.",0
An employee was assisting movers to unload medical equipment using a pallet jack and amputated his right index finger.,1
"Employees were working at a steam/hot water-filled drain box and had removed the cover for the drain box. An employee was walking into the area to hook up a vacuum truck when he stepped into the uncovered drain box. He suffered burns to both lower legs, requiring hospitalization.",1
An employee was assisting the crane operator with the four way rigging to a crop bucket for removal at the melt shop area of the plant and was caught between the lifting device and the hand rail resulting in three fractured ribs on the right side.,1
"An employee was delivering a plastic sheet to a customer when the sheet tipped over and lacerated the employee's leg, requiring hospitalization.",1
"An employee fell to the floor while retrieving merchandise using a staircase ladder, breaking the right hip.",1
"An employee was in a bucket truck attempting to replace solar light cells when the employee contacted energized parts and suffered an electrical shock. The employee then fell approximately 25 feet out of the bucket truck to the ground, breaking ribs.",1
An employee was making a bundle out of individual pipes. A single pipe rolled against his left foot trapping it against the pipe behind his foot resulting in a fractured left foot.,1
An employee's right middle finger was inside a threaded hole to lift a crammer machine when the crammer cycled and amputated his fingertip.,0
"An employee was exiting a rock crusher and getting onto a 6-foot step ladder. He was holding onto the handrail while getting his feet onto the ladder. His feet were on the second rung from the top when the ladder kicked out from underneath him. He held onto the handrail momentarily and then fell 4 to 5 feet to the ground (gravel pad), breaking his left wrist and suffering a small compression fracture in his lower back. He was hospitalized.",1
An employee was making a delivery and was closing the door to a freight elevator at the customer location. The door came down faster than expected and caught his left hand between the two metal doors resulting in a fractured left index finger.,1
"An employee was cleaning a kitchen hood canopy. He put a plywood board on top of a boiling kettle to reach the hood but fell into the kettle, sustaining second degree burns to his left leg and buttock.",1
"An employee was sanding a fiber board when the employee's hand was caught in the sander, partially removing skin.",1
An employee was standing on a ladder taking a sticker/decal off of a propane truck when he fell off the ladder and struck his head on the concrete floor.,1
"An employee was helping a road bore move pipes from one place to another. The employee was strapping up the pipe casing as a backhoe was reversing nearby. The backhoe then struck the stem connected to the pipe's auger, which resulted in a teeter-totter effect, causing the pipe to strike the employee around his right thigh. He suffered a compound fracture to his right tibia and fibula, as well as a twisted ankle.",1
"An employee was working on the rig floor assembling a bottom hole assembly when a shock-sub struck the top of his right foot, damaging his pinky toe. His toe had to be surgically amputated from the last joint.",1
An employee received a thumb pad amputation while troubleshooting a wooden pallet dispenser.  The ram of the dispenser came forward to dispense a pallet and on its backward stroke caught the employee's thumb and pinched it between the ram and ram housing.,0
"An employee was placing her lunch up on a coat hook when she turned around and fell approximately 12 inches from stairs to the ground, fracturing her right femur.",1
"An employee was walking down a store aisle when she tripped over a metal plate and fell to the floor, breaking her hip and requiring surgery.",1
"An employee was selecting a pipe fitting from a cart for installation. The employee took a fitting from the cart, moved to get back onto a ladder, and slipped. As the employee started to fall, he grabbed the handle on the cart and suffered a hernia, requiring hospitalization and surgery.",1
"An employee was dropping a tree. The falling tree struck a nearby tree, causing the felled tree to spring up and strike the employee. He suffered a left shoulder injury and collapsed lung, requiring hospitalization.",1
"An employee was using a crane and sling to support a part while changing the inserts when one leg of the two-leg sling became hung up on part of the machine. The employee continued to raise the crane, and the unconnected sling leg released and struck his chin, fracturing his mandible.",1
"An employee was troubleshooting a dual portioning valve tester. His finger was in the point of operation when the machine cycled, causing an amputation.",0
"An employee was standing and welding in a scissor lift that was approximately 11'-8"" above the finished concrete floor when his clothes ignited and he tried to remove them. He then tried to dismount the scissor lift through the chain gate on the rear of the lift. He attempted to step down the scissor supports of the lift but lost his grip and fell to the ground. He landed on his left wrist and left side. He suffered burns and a broken wrist, requiring hospitalization.",1
"An employee was lifting a 500-pound backpan with a crane when slack in the line caused the backpan to drop. He tried to catch the backpan, which severely injured the middle finger on each hand. His left middle finger had to be surgically amputated.",0
"An employee was cutting sheet to attach to an extrusion winder when the employee's left hand was pulled and flipped by the winder, fracturing the employee's upper left arm.",1
"An employee was adjusting the lumber on a chain conveyor when the chain came off the sprocket. His left hand was caught by the chain and sprocket pulley as he tried to put the chain back on the sprocket, partially amputating his pinky finger (first knuckle), fracturing his ring finger, and damaging the ligaments on his other fingers. The chain conveyor was moving at the time of the incident.",0
"On March 20, 2018, at 6:10 PM, an employee was helping to tighten a tension pulley on a ripsaw when his right hand was caught between the chain and sprocket. He experienced pain, swelling, and bleeding and was hospitalized with contusions and a broken bone that required surgery.",1
An employee was descending a tower crane when he fell approximately 20 feet from one landing to the lower landing located inside the tower crane. He sustained head injuries and was hospitalized.,1
"An employee received an electrical shock while using a shrink wrap machine, requiring hospitalization.",1
"An employee was riding as a passenger on a golf cart when it struck a forklift. The employee sustained a broken nose and mandible, as well as a laceration to the knee, requiring hospitalization.",1
"An employee was sprayed with hot coolant from a pressurized hose while performing a coolant flush on a vehicle. The employee suffered second degree burns to the chest and arms, requiring hospitalization.",1
"An employee was leaving the building, slipped on a wet/icy area and fell resulting in a rib injury.",1
"An employee was demonstrating an exercise to a patient during a physical therapy session when the employee fell onto the carpeted floor, suffering a neck fracture that required surgery.",1
"An employee was installing insulation from a scissor lift that was 15 to 20 feet above ground level when he flipped over the railing and landed on the ground, injuring his back. He was hospitalized and had surgery.",1
An employee was using a handheld grinder to cut thread rods on pipe stands when the abrasive wheel on the grinder kicked back and cut his left wrist.,1
An employee was injured while removing a pole with a boom truck.,1
"An employee was standing on the delivery ramp at the rear of his straight truck closing the back door of the trailer when he mis-stepped and then fell approximately 4 feet to the ground, fracturing his right arm.",1
"An employee's left hand was caught and crushed between a C-channel and a building wall while he was hooking a dock lock at the loading dock, resulting in a left ring finger amputation.",0
"An employee was on a scaffold platform waiting for bricks to be delivered. When the bricks were placed on the scaffold, they broke the wooden platform, causing the employee to fall over 20 feet. The employee suffered shoulder and torso bruising.",1
"While catching cut lumber boards from a saw, an employee attempted to remove an off-cut board from the blade, resulting in in a finger amputation. The saw was not locked out and the blade was rotating at the time of the incident.",1
An employee was moving a pallet from side to side using a pallet jack when he felt a pop in his stomach due to a hernia.,1
"An employee was climbing a ladder to retrieve a window in storage when he lost his footing halfway up and fell to the ground below, fracturing his left arm and leg. He was hospitalized.",1
An employee was operating a drill press when the drill bit caught his glove and pulled his right index finger into the moving drill bit. His right index fingertip was amputated.,0
An employee was patrolling the mountain when air caught under the ski causing the employee to fall and break their leg.,1
"An employee was using a driver to drive a T-post into the ground. When he raised the driver, the T-post fell to its side and his right index finger was pinched between the T-post and the driver, fracturing his fingertip.",1
"An employee was working at a flexographic machine and setting up for the next order. He manually turned the pull roll with his right hand while his left hand was above the shaft, and his left middle fingertip became lodged in the machine, resulting in a fingertip amputation.",0
"An employee tripped over a mobile hanger carry rack, fell and fractured his right hip.",1
"An employee was using a push stick to cut small strips of wood on a 14"" table saw when his left index finger contacted the saw, causing a severe laceration that resulted in a partial amputation.",0
"A temporary employee was washing down a crumb machine with a water hose when his left hand contacted a rotating auger, partially amputating his middle finger below the second knuckle. The machine was guarded at the time.",0
"An employee was moving a pallet of toilet paper with a stand-up forklift when the employee's right leg was crushed between the frame of the stand-up forklift and the steel upright post of a rack system. The employee's right leg broke below the knee, requiring hospitalization and surgery.",1
"An employee was moving a sheet backwards on a roof when he slipped and fell on top of a shooting boom lift basket, breaking a femur.",1
"An employee was preparing to change knives on a wood cutting machine when the moving plate struck the guard that had the knife block resting on top of it. The movement of the plate launched the knife block into the air. The block then struck the employee, causing facial injuries and broken teeth.",1
"An employee was maintaining a lift gate when it fell. His fingers were caught between the lift gate and the ground, resulting in a partial amputation of the ring finger and a lacerated middle finger.",0
"An employee was using a band saw to cut a piece of foam rubber. As the employee repositioned the foam, the saw cut the palm of the employee's left hand.",1
"An employee was shoveling wood scrap into a chipper when the employee was struck by a board that came off a conveyor, suffering a neck injury.",1
"An employee was walking in the parking lot when he tripped over the parking divider, suffering an open wound on his knee.",1
"While pushing a wheel caster with a cart, an employee ran into another piece of equipment. This created a pinch point between the employee's hand and the equipment, resulting in a left fifth fingertip amputation.",1
An employee was handling/moving materials on and off of pallets when the employee's right ring finger was pinched and partially amputated between pallets.,0
"An employee was helping a jockey truck driver close the doors of all of the trailers to prepare for a snow storm. The employees could not completely close the doors of the holding trailer, so the employee stood behind the trailer and held the doors closed while the jockey driver backed the trailer up the bay door. The employee was then pinned between the dock plate and the trailer, suffering a broken left arm and bruised upper/lower torso.",1
"An employee was taking a sample of aluminum when molten aluminum splashed on his right hand, causing burns.",1
An employee smashed a finger between bearing housing of rolls and a sander framework.,1
"An employee fell while pushing a recycling bin, suffering neck and back pain.",1
"The injured employee was placing a wooden 4""x 4"" stud under a metal roll and the load slipped pinching his left index fingertip.",1
An employee was using a push stick to trim a wooden board on a table saw when the board kicked back and hit the employee's abdomen.,1
"On March 21, 2018, an employee was clearing the side guard on a table saw when his fingers came into contact with the saw blade. Two of his left-hand fingers were amputated at the middle knuckle.",1
"An employee was moving narrow steel coils. When he removed the chain from a coil, the coil fell over and struck him, trapping and bruising his left leg.",1
An employee was pressing the safety latch on a hoist hook and lowering a sheet lifter when his left thumb was caught between the safety latch and eye hook of the sheet lifter.,1
"An employee was changing out of his uniform at his locker when he tripped on the strap of a costume roller tote (hamper) and hit the floor, breaking his left hip.",1
"An employee was measuring and cutting insulation using a water jet cutter when his hands went under the water jet, lacerating his right pinky. The machine was guarded at the time.",1
"While unloading a pallet of boxes, an employee stepped onto a pallet. The employee's foot went between pallet boards and became stuck, resulting in spiral fractures to the tibia and fibula. The employee was hospitalized and had surgery.",1
An employee was attempting to clean the adhesive on a rotary die cutting machine when it lacerated two of the employee's left middle fingertips. The machine was operating at the time of the incident.,1
"An employee was fine grading dirt around a concrete channel box when he tried to jump over the box, suffering a concussion and facial contusion.",1
"An employee was performing maintenance work, which included greasing lines at a kiln. The screw broke while the employee was installing it for a clamp, making the employee lose balance and fall 21'. The employee suffered injuries to the face, mouth (tooth loss), and leg (compound fracture), requiring hospitalization.",1
An employee was attempting to straighten out a bad part with a flattening die when the part slipped off the flattening die and severed his left index finger against the front face of the die.,0
An employee was working on a piece of equipment when his glove was pulled by the chain. His right middle fingertip was then caught and amputated in the chain and sprocket.,1
The injured employee was lifting an aluminum style window and amputated his left index finger between the window seal and the window base.,1
"An employee was loading up a car to transport a client to a doctor's appointment. The client locked the employee out of the car and started the engine, then put the car in reverse and struck the employee. The employee suffered third degree burns to the leg and two leg fractures.",1
"An employee was on a ladder testing an energized wire in the ceiling to make it safe when his pliers touched the electrical junction box, causing an arc flash. The flash startled the employee, causing him to fall off the second rung of the ladder to the floor, re-aggravating a pre-existing shoulder injury.",1
"An employee was tightening a bolt on the end of a cutter machine's bed knife when the ratchet handle slipped off the socket, causing the employee to fall backwards. He broke his right tibia and fibula, requiring hospitalization.",1
An employee was operating a can crusher machine when it amputated half of one of the employee's fingers.,0
"An employee was walking in a common area hallway while returning from the restroom when he tripped and fell, fracturing his hip.",1
"An employee was attempting to break up a fight between patients when she was pushed to the ground, fracturing her right femur.",1
"An employee was driving a boom lift when it bounced off a curb, causing him to strike his mouth on the bar above the controls. He suffered a head contusion as well as fractures to the jaw and ribs.",1
An employee was cleaning a product mixer when his hands entered the stock cutter opening. His left hand and three fingers on his right hand were amputated.,1
"An employee was setting a pin in a boom to connect two sections. When the employee went to hit the pin with a sledgehammer, his hand slipped and the sledgehammer struck his hand, fracturing his finger and resulting in an amputation.",1
"An employee was moving a load with an overhead crane. The load was not centered and struck a frame supporting it. The load then fell and struck the employee, who suffered a fractured left leg and laceration.",1
"An employee was introducing a new chemical (copper sulfate) into a 6,500 gallon tank of sodium hypochlorite when a chemical reaction occurred, exposing the employee to a gaseous reaction (chlorine gas). Respiratory protection was not worn at the time.",1
"An employee was taking trash to the compactor, tripped on the stairs and fell fracturing the right clavicle.",1
"While descending stairs to a basement floor work station, an employee lost balance and fell, suffering a head injury.",1
"An employee was working on a baker's scaffold when the platform gave way and he fell approximately 4 feet, suffering a vertebral compression fracture. He was hospitalized.",1
"An employee slipped and fell on ice in the truck yard. The employee's head struck the ground, suffering internal bleeding.",1
An employee was operating cheese shredder when the unit malfunctioned. The employee was troubleshooting the machine when it automatically activated and amputated several of his fingers.,1
"An employee was providing access control to other employees. She was walking down the hall when she fell and injured her nose, forehead, and left arm, requiring hospitalization.",1
"An employee was adjusting the tip on his pressure washer with his right hand when he accidentally hit the trigger with his opposite hand, shooting a stream of high-pressure water into his right hand. He suffered a laceration to his right hand and was hospitalized for an embolism.",1
"On 3/22/2018, an employee was clearing bottles from a conveyor when her finger was caught in the sprocket and pulley mechanism at the junction between the conveyor and the machine, resulting in a finger amputation.",0
An employee closed the trunk of her vehicle on her right hand resulting in amputation of the right middle finger.,1
"On 3/22/2018, an employee was attempting to remove glue buildup from a machine's rollers when the machine's cutting knife amputated the employee's right middle finger. The machine's gate was open at the time of the incident.",0
"An employee finished installing trusses and was climbing down a ladder when it slid out from under the employee. The employee fell 8 to 10 feet to the ground, breaking a leg and ankle.",1
"An employee tripped and fell over the charging cable to her forklift, suffering a femoral neck fracture of the left femur and left shoulder pain.  She was hospitalized and had surgery.",1
The injured employee was preparing samples for testing and was processing nitric acid and oil and gas samples in a glass container when the glass container exploded resulting in burns and puncture wounds to the employee's hands and arms.,1
"An employee was disassembling scaffolding when he lost his balance and fell, impacting the ground and breaking his leg. He was hospitalized.",1
An employee was caught between a lift basket and a crane.,1
"An employee reported the smell of glue outside the hallway to operating rooms under construction.  After being exposed to the smell for approximately four hours, the employee became sweaty and began vomiting from possible vapor inhalation.",1
"An employee was delivering beverages to a customer location. He climbed onto the rear of the truck, stepped onto a concrete wall and climbed over the safety rail. His foot got caught on the rail and he fell forward onto the concrete surface resulting in an elbow injury.",1
"An employee was preparing to make vertical saw cuts in a hard wood floor for removal. The employee was using a 7.25"" circular saw set at a depth of 0.75"" when the tip of his glove was pulled into the rotating blade, cutting and partially amputating his left thumb at the tip.",0
"On March 22, 2018, an employee slipped on ice in the parking lot, fracturing his left leg and requiring hospitalization.",1
"On 3/22/2018, at around 12:35 a.m., an employee was walking to her car in the parking lot when she slipped and fell on ice, breaking her right ankle in three places. She was hospitalized and had surgery.",1
"An employee was operating a power buggy to help pour a concrete slab and footer. He had to get off the power buggy platform to fold a piece on the equipment. While he was walking beside the machine, the steering tires hit an obstruction, causing the machine to push him between a large glass window panel and the power buggy. He broke his right lower tibia and fibula.",1
"An employee left her car to deliver a parcel and was walking through a parking lot when she tripped on a parking bumper and fell to the same level, fracturing her left arm.",1
"An employee was cleaning at the exterior rice bins when the employee attempted to clean a drag conveyor. The employee's left hand was in the conveyor when it started, breaking the employee's left hand and forearm. The employee was hospitalized and had surgery. The conveyor was unguarded at the time of the incident.",1
"On 3/23/2018, an employee became ill after shoveling snow, losing consciousness and requiring hospitalization.",1
"An employee was operating a press to stamp a fender. He was attempting to remove the fender when the cam crushed his right index finger between the part and the cam, resulting in a fingertip amputation.",0
"An employee was working in the office when water entered the office as a result of a broken water pipe (exterior to the building). The employee was attempting to contain the water leak by spreading linens when she slipped and fell to the floor, breaking her right patella and requiring hospitalization.",1
"An employee was working on the lamination line when he saw some hardened resin on a roller.  He used a tool to try and remove the resin, but his hand was pulled into the rollers, resulting in a right index finger amputation.",0
"An employee was struck by a forklift while fitting a pipe, crushing the employee's hand.",1
"While removing parts from a tumbler, an employee slipped and fell toward the tumbler. The employee's left hand was caught in the machinery and a tumbler gear smashed the left ring fingertip.",1
"An employee fell while entering a bus, suffering swelling to the arms and legs.",1
"An employee slipped on ice and fell in the parking lot, fracturing an ankle.",1
"An employee was performing a change-over of the web lead at a press machine when the employee's left arm was caught between the machine's drive/drag roller and the slitter roller, resulting in arm bruises.",1
"An employee was cutting a cardboard core on a core cutting machine when the core spun out of the machine, striking the employee in the face and mouth. The employee suffered nose, sinus, and palate fractures.",0
An employee was moving a lathe. The machine tipped over and the employee tried to catch the machine. The employee sustained a fractured femur.,1
"An employee was cutting meat on a band saw when the meat became caught on the saw and caused the employee's hand to contact the saw, cutting a fingertip.",0
"Two employees were sitting on a beam facing each other and protected from falling. They were working to drive barrel pins for a field splice. Employee 1 was using an 8 lb. sledgehammer to drive a pin, but missed the pin and hit a spud wrench that was sitting on the splice. The wrench was propelled upward and struck employee 2 in the face, causing nasal and facial fractures that required hospitalization.",1
"An employee was cleaning a screw conveyor and when he lifted a lid to clean underneath it , the conveyor pinched his left-hand fingertips. His index, middle, and ring fingertips were medically amputated. The conveyor was in motion at the time of the incident.",1
"An employee slipped and fell on ice in the parking lot, suffering a left ankle fracture. The employee was hospitalized and had surgery.",1
A temporary employee was assembling store fixtures using a staple gun when a 1-inch staple penetrated his head.,1
"An employee was picking up an I-beam with a magnetized lifting device when the I-beam slipped off the lifting device and struck his left foot and ankle just behind the metatarsal, requiring hospitalization.",1
An employee was securing a ladder and fall protection on a roof when the employee fell 20 feet to the ground.,1
"An employee was trying to remove a piece of rebar from a magnet when his arm was caught in the magnet pulley, breaking his arm and wrist.",1
An employee had a seizure after a stressful staff meeting.  The employee was hospitalized.,1
"An employee was unplugging a hydrolyzer machine when it dispensed hot steam, burning his right neck area and requiring hospitalization.",1
"An employee was working within the cubicle of a primary switch when an energized buss (approximately 13,200 volts) arced and caused a flash fire. The flash fire burned his left arm between his shoulder and elbow.",1
An employee was constructing a pipe bomb when it blew up in his face. He suffered severe facial swelling and blurry vision.,1
"An employee was walking backward while pulling a cart when she tripped and fell to the concrete floor, striking her head. She suffered a head laceration and head contusion.",1
"On 3/23/2018, an employee was using a table saw to cut cardboard boxes when the cutting material jumped off the table. The saw blade then amputated two of the employee's fingertips.",0
An employee was inspecting a pressure relief valve on a unit when the relief valve discharged heated gas into the employee's face. The employee suffered a corneal abrasion and superficial burns to the face.,1
"On March 24, 2018, an employee was changing a die on a punch press when the machine actuated, amputating the employee's right index finger. The press was not powered off at the time of the incident.",0
An employee was helping a forklift operator move pallets when the forklift operator turned and pinned the employee's shoulder between the forklift and a pole. The employee was hospitalized with a fractured left arm.,1
An employee was talking to the driver of a vehicle when it ran over his right foot. He experienced bruising and swelling that required hospitalization.,1
"An employee was standing on the floor removing a sample of molten iron from a furnace. The sample cup became caught on the lip of the furnace and molten iron spilled onto the employee's aluminized pants, contacting his leg through a pocket opening. He received burns to the thigh, calf, and ankle.",1
An employee was removing dough from the floor when the employee's arm was caught in a conveyor and fractured.,1
"An employee was attempting to unjam a food processor when the blades spun and cut her hand, resulting in a right middle fingertip amputation and an index finger laceration.",0
"An employee was lowering a 24-inch long steel I-beam that was connected to a chain sling. After he disconnected one end of the rigging, the loose end struck and broke his leg.",1
"An employee was loading up a payoff machine when the employee's left index finger was caught between the reel and the drive arm of the payoff, resulting in an amputation of the distal phalanges on the left index finger.",1
"An employee was standing behind a door when a patient suddenly opened it. The door hit the employee, causing her to fall to the ground and break her hip.",1
"While extinguishing a fire in a warehouse, an employee inhaled smoke and became dehydrated.",1
"An employee was unloading cargo from an aircraft when a container of chemical ripped open. The employee was exposed to the chemical and suffered an asthma attack, requiring hospitalization.",1
"An employee was operating a stacker to stock papers when his hand contacted a gear and belt, resulting in a partial finger amputation. The stacker was unguarded at the time.",0
"An employee fell from a pickup truck while unloading equipment, suffering a fractured right wrist and left elbow.",1
"An employee was manufacturing copper pipe fittings using a hydraulic press when a fitting fell into the machine. The employee was attempting to retrieve the fitting when the die came down on the employee's left index finger, amputating it at the first knuckle.",0
"An employee was working underneath a lift table when the table started and came down on his chest, breaking five ribs.",1
"On March 24, 2018, at about 9:30 p.m., an employee brought his gun into work and was cleaning it when the gun discharged, shooting and fracturing his right femur.",1
"On Saturday, March 24, 2018, at 10:00 AM, an employee was using a chop saw to cut PVC pipe when the saw amputated his finger.",0
"An employee was walking behind a banding machine when the employee tripped over excess banding material and fell to the floor, fracturing a patella.",1
"An employee was pushing an electrical pallet jack loaded with parts baskets. While going through a doorway, the parts baskets caught the door frame and fell back onto the employee, who suffered fractures to the skull, cervical vertebrae, and ribs, as well as an ankle injury.",1
An employee was dumping containers at the parking lot level when one of the container doors closed on his right hand. His right index fingertip had to be amputated.,0
"An employee was choked by a resident, fracturing her trachea and requiring hospitalization.",1
An employee was reversing a double power industrial truck when his left foot was smashed between a yellow valet bar and the industrial truck. He sustained an opened fracture to his left ankle.,1
"An employee tripped over a mat and fell at a food stand, suffering a fractured hip.",1
"An employee tripped while wrapping a pallet, fracturing a leg and requiring hospitalization.",1
"A crew of employees were cleaning a site to prep it for oil rig drilling work. While lifting debris from the ground, one employee was bitten by a cotton mouth snake, requiring hospitalization.",1
An employee was working underneath a machine and when he stood up he hit the back of his head on a PVC part that is fixed to the machine.,1
"An employee was standing on coiled wire while removing strapping from other coiled wire inside the cargo hold of a vessel. As the employee was removing the strapping, he fell approximately 8 to 10 feet from the coiled wire he was standing on down onto the metal deck below. He sustained fractures to his lumbar spine.",1
Two employees were troubleshooting a piece of equipment. The first employee had his hand on a sprocket when the second employee jogged the machine. The sprocket moved and amputated the first employee's fingertip.,0
"A temporary employee tripped and fell on the carpet while walking, breaking a rib and rupturing his spleen.",1
"On March 26, 2018, at approximately 11:35 a.m., an employee was moving wire through the rollers of a strander machine when the employee's glove was caught between the wire and roller. The employee's right ring finger was then pulled into the in-running nip point, resulting in a fingertip amputation.",0
"An employee was operating a sweeper machine when a passing motorist struck it, causing the employee to be ejected and strike the ground. The employee suffered head trauma, broken ribs, and exterior abrasions on the arms, requiring hospitalization.",1
"An employee stumbled while walking down a flight of about 15 stairs, hitting his head on the landing and suffering a concussion.",1
"An employee was walking in the rebar shop when he fell to the floor, suffering facial contusions and an injury to the vertebrae in his neck.",1
"An employee was erecting signage while other employees loaded scrap metal into a ship for export. During these loading operations, a piece of metal fell from a grapple and struck the employee's side and back. He suffered five broken ribs and two fractured vertebrae, requiring hospitalization.",1
"An employee was turning on an oxygen tank to a nitrous oxide mixer when the machine burst into flames, causing second degree burns to the employee's right thigh, left hand, and face.",1
"An employee was using a blower as a vacuum to pick up broken glass when the nozzle became loose. He turned off the equipment and as he was trying to secure the nozzle, his left ring finger made contact with the blower fan, resulting in a fingertip amputation.",0
An employee was operating an L-panel machine when his hand was caught and crushed between the rollers.,1
"An employee transferred paint thinner into a water bottle and placed it on his working station. After working for a while, he became thirsty and drank out of the water bottle.",1
An employee fell from the roof of a residential construction project.,1
"An employee was walking away from a screw conveyor when his right foot stepped into a square floor drain opening. While his foot was in the floor drain, hot water (140 degrees Fahrenheit) flowed into the opening and onto his right foot, causing second degree burns.",1
"An employee was struck by a reversing forklift, suffering a broken ankle.",1
"An employee was approaching a doorway while carrying several large items in her hands. As she approached the step leading to the doorway, she tripped on the concrete curb and fell, fracturing her right ankle.",1
"On March 26, 2018, an employee was trying to restrain a client when he twisted his knee and tore a muscle in his thigh. The employee was hospitalized for surgery.",1
"An employee was building a skylight curb on the roof of a building. He was cutting a piece of plywood with a saw when it kicked back, cutting the little, ring, and middle fingers of his right hand. His little fingertip was amputated.",0
"An employee was walking down the aisle, tripped and fell resulting in an ankle fracture and hospitalization.",1
"An employee was disconnecting a trailer and pulling on the release when he fell backwards and hit the ground, passing out and injuring his spine.",1
"On 3/26/2018, at approximately 21:01, an employee was unloading coffee pods from pallets and placing them onto a conveyor when her fingers were caught in an unguarded chain and sprocket, resulting in four finger amputations.",0
"An employee fell to the ground while climbing a ladder, suffering a broken ankle.",1
"An employee slipped and fell in an icy parking lot while delivering product, injuring his back.",1
"An employee was transferring fuel from a fuel truck to an underground storage tank when he noticed that the fuel truck started to roll forward. While attempting to prevent the truck from hitting a concrete pillar, his body was caught between the front of the truck and the pillar. He suffered a pelvic injury and internal bleeding, requiring hospitalization.",1
An employee was sliding a cant onto a scissor lift material table when his right index finger was caught between two cants and amputated.,0
"An employee was cutting a banded pack of 1-inch thick lumber boards. Immediately after cutting the band, the uneven pile of lumber fell toward him and knocked him over. His middle fingertip became trapped between two of the boards, resulting in a fingertip amputation.",0
"An employee was manually sliding a tail stock into a slitter machine's arbors when his right index finger was pinched between the stock and a bolt, causing a fingertip amputation.",0
"An employee was filling a tank with nitric acid. The nitric acid sprayed out of the ball valve onto the employee's back and leg. The employee received second degree burns to the buttock area, requiring hospitalization.",1
An employee was changing tools on a router when his left hand was caught and partially amputated by the router head. The router was guarded at the time.,1
"An employee vomited and passed out due to heat stress while collecting corn, requiring hospitalization.",1
"An employee was attempting to rope a steer when the steer jerked. The rope caught the employee's right hand, pulling it into a pole and amputating two fingers.",0
"An employee was bending over to grab some trays from a pallet that was on the floor when a pallet of raw material boxes tipped over and fell from a rack, landing on top of the employee. He suffered a head laceration and concussion, cervical fracture, and left ankle sprain.",1
An employee was directing the lowering of a trench box while standing on a sewer inlet when the box swung and crushed his foot between it and the sewer inlet.,1
"An employee tripped and fell while walking, suffering fractures.",1
"On March 27, 2018, an employee was operating a mandrel machine when it amputated the employee's right hand/arm.",0
"An employee was dusting a window sill from a 6-foot step ladder when the employee fell to the ground, suffering a hand laceration and bruised ribs resulting in breathing difficulty that required hospitalization.",1
"An employee fell about five feet off the back of a flatbed trailer while securing a load of coiled steel spools with ratchet straps and impacted the concrete driveway below.  The employee sustained a head injury, a right arm fracture and a fractured pelvis.",1
An employee climbed up a pilaster wall panel to hook up with the crane. The employee removed the she-bolt and the wall panel fell while the employee was hooked off to it. The employee suffered a broken right tibia and left shin laceration.,1
"An employee was cutting down dead tree underbrush with a chain saw when the saw bounced back and contacted his shin, severely lacerating it. He was hospitalized.",1
"An employee was climbing a fiberglass extension ladder that was on a deck and leaning against the gutter of a house. The ladder slid out and the employee fell approximately 7 feet, landing on his chest. The employee sustained three broken ribs, a punctured lung and a strained elbow.",1
"An employee was working from a portable ladder to install an industrial refrigeration unit using a handheld grinder. He lost his footing and fell approximately 2 feet from the ladder, striking the ground and breaking a rib.",1
An employee was riding an electrical pallet jack when he struck a table and his left leg was caught and broken between a wall and the pallet jack.,1
An employee was working inside an excavation when a loose rock (1.5 feet in diameter) rolled into the excavation and struck the employee on the back.,1
An employee was walking backwards alongside a forklift to help steady the load (scaffold component). He tripped and fell and was run over by the forklift injuring his right thigh and left leg.,1
"An employee was tightening a light fixture from an A-frame ladder when he lost his balance and fell to the floor. He hit his head, suffering head and tongue lacerations that required hospitalization and sutures.",1
"An employee was pulling a hose off a dishwasher. When the hose broke free, the employee's forearm slammed against a piece of glass under the dishwasher, causing a laceration that required sutures.",1
"An employee was attempting to hook up an airline for an air sander. The employee's left arm was between the straining rod and control box of a press when it became caught between a caution sign on the straining rod and the control box. The employee suffered left arm contusions near the elbow area, requiring hospitalization.",1
"An employee was checking for a bind in the chain of the ""tipper"" when the machine actuated and caught the employee's right index finger between the chain and sprocket resulting in an amputation injury.",0
An employee was working from a ladder putting equipment above the drop ceiling when the ladder slipped and he fell to the ground. He sustained fractures to both arms and was hospitalized.,1
"An employee was removing reflective orange traffic cones from an eight-lane roadway when he was struck by a vehicle, suffering a broken right leg, broken orbital bone, and facial lacerations.",1
An employee was struck by a forklift.,1
An employee was exposed to vapors and became ill while walking through the building.,1
"An employee was examining the brakes of a trailer as part of a pre-use inspection when another employee  moved the trailer and ran over his right leg, fracturing it.",1
"On March 27, 2018, an employee was using a prybar to free bound material on a wire dispensing carriage station when the prybar slipped free, causing the employee to lose balance and fall to the concrete floor. The employee suffered a spiral fracture of the upper left leg.",1
"An employee had climbed onto the top of a one-unit lumber truck to strap down the load. When coming down the side of the truck, he lost his footing and fell to the ground, suffering a concussion, a broken rib, and a  facial fracture.",1
"On March 27, 2018, at approximately 7:30 AM, an employee noticed a piece of trim tangled up on a slitter and was in the process of clearing the machine when the blade cut him. He suffered a distal tip amputation of his left thumb.",0
An employee was moving product onto a pallet. The employee was moving out of the way of an oncoming powered industrial truck (PIT) when the employee stepped backwards into the pallet on the PIT resulting in a fractured fibula near the ankle.,1
An employee was dumping a portion of a load from a buggy when he lost control of the buggy and descended down a ramp. His right leg was pinned and broken between the equipment's gas tank and a wall.,1
"An employee was transferring trash from a rolling hopper to a dump hopper when his right hand entered a pinch point between the dump hopper and the rolling hopper. His right thumb was crushed, resulting in a thumb tip amputation.",0
"An employee fell to the concrete floor and landed on her back after she slipped in water while walking, fracturing her lower vertebrae. She was hospitalized.",1
A crane was lifting a slab of concrete when the concrete fell and pinned an employee. The employee suffered a pelvic fracture.,1
"An employee was using small material handling equipment (MHE) to place a box of product onto a shelf. Another employee was operating a larger MHE to retrieve empty pallets from the shelf racks in the same aisle. The second employee's MHE equipment was raised in the air approximately 20 feet as it was being moved to the next pallet. The second employee did not see the first employee working below him or her MHE sitting in the aisle, and the MHE equipment collided.  The first employee's left ankle was caught and crushed between the two pieces of equipment, requiring hospitalization.",1
"An employee was crossing through an alleyway to reach another building when a trash truck backed up and ran over his right foot, fracturing it and requiring hospitalization.",1
An employee walking in the receptionist area tripped over the electrical cord of a paper shredder and fractured her left hip.,1
"An employee was adjusting wooden dunnage under concrete piling when the pile unexpectedly shifted due to a wind draft. The employee was then caught between a metal form and the concrete pile, fracturing his pelvis.",1
"An employee experienced difficulty breathing due to paint fumes coming from a nearby work station, requiring hospitalization.",1
"While tearing shingles off a roof, an employee fell about 14 feet, 9 inches to the ground, suffering breathing difficulty.",1
A employee was troubleshooting a mechanical problem on a stacker. His hand was in the chain/sprocket area when another employee on a different part of the equipment started the stacker. The distal portion of his index finger was then amputated. The stacker was unguarded and not locked/tagged out at the time of the incident.,0
"A maintenance employee was working from a 6-foot step ladder to repair an overhead door when the pipe wrench he was using slipped off a tension spring and hit his head. He then fell off the ladder, landing on his right side and hitting his head on the dock floor. He sustained two skull fractures and a hairline fracture to the jaw.",1
"While disassembling a scaffold, an employee fell from the fourth level of the scaffold to the ground, fracturing the C-6 vertebra and requiring hospitalization.",1
"An employee was on a porch delivering mail to a residence when a portion of the porch gave way. Debris from the porch struck the employee, causing back and neck injuries.",1
"An employee was rigging I-beams for a crane when an I-beam fell on his right leg, fracturing it below the knee. He was hospitalized and had surgery.",1
"An employee was standing on a porch that was 13 feet from the ground and was tying off to a hand rail when another employee from a different company took out the pin that stabilized the porch. The porch swayed, causing the employee to fall to the ground. The employee suffered a broken collarbone, four broken ribs, one lung bruise, and a head injury that required stitches.",1
"An employee was crossing railroad tracks with a tractor when he was struck by a train, suffering fractures.",1
An employee missed a step while attempting to climb down from a top stock cart ladder and fractured a bone in her leg. She was hospitalized and had surgery.,1
"An employee's left arm was inside a three-knife trimmer when the machine cycled, deeply puncturing and breaking the employee's left arm.",1
An employee was initiating the cleaning process for a crepe cooker when the employee's hand was crushed and burned between two rotating drums. The crepe cooker was unguarded at the time.,1
"An employee lowered a truck lift gate to unloading the trailer at a store. He was pulling a table to the back (end) of the trailer when the table became caught on a stirrup, causing him to trip/fall and strike his jaw. He suffered a fractured jaw and was hospitalized.",1
An employee inhaled vacuum testing gas (stannic fluoride) from what appears to be a horseplay incident.,1
"An employee was moving a crane and outriggers when his middle finger was pinched between the lip of an outrigger and the crane, resulting in a partial amputation.",1
"An employee was operating a sit-down forklift in reverse and ran into a trailer. As the forklift struck the trailer, the employee's right hand was crushed between the exterior frame of the forklift and the trailer. The employee sustained crushing injuries to three fingers on his right hand.",1
"An employee needed to replace the wheels on a sliding gate so he jacked up the gate with a hydraulic jack and was removing the wheel. The gate slipped off of the jack and lacerated his right ring finger, requiring hospitalization.",1
An employee was operating a powered pallet jack and struck a column resulting in a foot laceration requiring hospitalization.,1
"An employee was attempting to splice a roll after a blowout. He was bringing the tail from the reel under the rider roll and was positioned on the tending side of the winder as the tail came around the back of the roll.  As he attempted to thread the tail under the rider roll, his finger became caught in the nip created by the rider roll and the roll of paper. He suffered an open fracture and amputation of his left index fingertip as a result.",0
"On March 28, 2018, an employee was changing a battery in a fork truck. He was attempting to remove a hoist chain from the battery hook when his right thumb tip was caught and amputated between the chain and battery hook.",0
"An employee slipped and fell while walking by the kitchen, suffering back and rib injuries that required hospitalization.",1
An employee was cleaning a cement/sand mixer when the machine amputated the employee's left index finger. The machine was on at the time.,0
An employee was moving freight when he damaged a disk in his back.,1
"An employee was walking up garage steps from a car to a work building. The employee stepped on one of the wet metal step edges and slipped, falling to the ground and fracturing an ankle.",1
"An employee was using a tractor to drag a lumber yard. He then got off the tractor to move an object. The tractor rolled forward and struck his right leg, fracturing it and requiring hospitalization. The tractor was in neutral at the time of the incident.",1
"On 3/28/18, an employee was working on the air valves for a spot welder when the valve actuated, pinching and amputating the employee's pinky finger against the frame.",0
"A pallet was lowered onto an employee's hand, amputating a fingertip.",1
"An employee was making repairs to a cylinder on a crane.  When the hydraulic line was removed, the pressure in the hose blew and cut the employee's left hand.  The employee was hospitalized and had surgery.",1
An employee felt chest pain and heart palpitations while working in a staging area outside a pharmaceutical filling room. The condition possibly resulted from chemical sensitivity.,1
"An employee was staging materials when he fell backwards. A carton containing a patio tabletop then fell on him, fracturing his lower back.",1
"An employee was working from an extension ladder about 6 to 8 feet above ground level.  He had a volt meter in his hands. The volt meter began to fumble and he attempted to catch it to prevent it from falling to the ground. In the process, he lost his balance and fell from the ladder to a 55-gallon metal drum that was located below.  The front of his right lower leg struck the metal drum, causing a laceration/avulsion to the skin.",1
"An employee was on a ladder installing guttering on a residential house when he lost his balance and fell approximately 20 feet, injuring his vertebrae.",1
"An employee was using an 8-foot fiberglass A-frame step ladder to access the ceiling. When he went to descend the ladder, it slipped. This startled the employee, who lost his balance and fell to the floor below. He fractured his left elbow and right wrist, requiring hospitalization.",1
"An employee was rolling a bar out of the way when the employee's left middle finger became stuck between the bar and the edge of a beam that was connected to an entry table, resulting in a distal amputation of the left middle finger.",0
An employee was using a table saw when the blade partially amputated the employee's fingertip. The blade was unguarded at the time.,1
An employee was moving a metal coolant tray and caught a finger in the caster wheel resulting in a fingertip amputation.,0
"An employee fell through an open shaft while installing drywall, suffering a broken collarbone and back.",1
An employee was clearing scrap from a jammed machine and got a hand caught in the machine resulting in amputation of the left middle and ring fingertips.,0
An employee shut off the disconnect box of a condenser and went to pop off the belt when the belt amputated three of the employee's fingers. The belt had not stopped moving at the time of the incident.,0
"An employee was loading a flat bed semi-trailer with a part that was almost as long as the trailer.  As he was walking the part up the deck of the trailer, his right foot broke through the rotten wooden bed of the trailer and his right shin struck a metal cross beam, suffering a laceration that required hospitalization.",1
An employee was performing maintenance on a gizzard machine when his left eye struck the machine lid.,1
"A maintenance employee was troubleshooting a malfunction on a shaker table. He was clearing material from the table when his gloved left hand slipped and was caught in the rotating parts, amputating his left index and middle fingers to the first knuckle.",0
An employee was using a hammer on a stuck valve when the hammer broke. A metal shard from the hammer pierced the employee's eye.,1
"An employee fell approximately 15 to 20 feet from a ladder while changing words on a billboard sign in the front parking lot. The employee impacted the pavement below, injuring an artery and breaking both wrists, a femur, and a rib.",1
"An employee was helping to stow an auger in a truck when the controls became stuck in high speed and his hand was entangled in the auger, partially amputating a finger.",0
An employee was sorting cattle and one of the cows kicked the employee in the leg causing a bruise and a large hematoma. He was admitted to the hospital to have the hematoma drained.,1
"An employee was loading a fully assembled sheet metal coil rack into a parts cart. The coil rack was placed on the edge and was started into the cart. As the employee began to slide the product into the cart, the rack slipped off of the table. The top portion of the rack that the employee was holding came in contact with the table. This created a pinch point where the employee's right pinky finger was caught between the coil rack and table, resulting in a partial amputation of the distal phalanx on the pinky finger (right hand).",0
"On March 28, 2018, at approximately 11:45 a.m., an employee was moving lumber down a green chain when a piece of lumber fell. The employee went down some stairs to retrieve it and while coming back up the stairs, he slipped and fell into the green chain. He put his left hand out to break his fall and it struck the green chain, breaking and lacerating his thumb. He was hospitalized and had surgery. The chain was not guarded at the time.",1
"While conducting a die change, an employee attempted to remove a clamp ring from around the die. The die ring assembly slipped and pinched the employee's left middle finger between the ring and the table of the press, resulting in a fingertip amputation.",0
An employee was attempting to unjam a food processor when the blade partially amputated the employee's fourth right finger. The food processor was running at the time.,0
"An employee was using a fixed ladder to take copper piping to the roof when he missed a rung and fell approximately 6 feet. He was hospitalized with fractures to his neck, back, and pelvis.",1
A temporary employee was welding when the employee's apron caught fire. The employee suffered second degree burns to the upper left arm.,1
An employee was hospitalized after showing signs of a possible heart attack while completing a work-related treadmill stress test to keep his SCAPE certification.,1
"After moping the floor, an employee was putting away a mop and broom when a resident ran toward her and fell on her, breaking her left knee.",1
An employee was lifting a beam and suffered an aneurysm in the torso.,1
"An employee dropped a case of 8 oz. glass bottles on top of another case of product while building orders. One of the glass bottles inside the case burst and pieces of glass shot up and struck his right eyelid, causing a laceration. He was hospitalized and had surgery.",1
"An employee slipped and fell to the floor while operating a floor stripping machine, breaking a leg and requiring hospitalization.",1
"An employee was cutting a piece of metal with a horizontal band saw when his right hand went between the metal and a vise used to hold it in place, resulting in a right thumb tip amputation.",0
"An employee drove a bus to a gas pump to fill it with fuel. As the employee was descending the bus steps, he slipped or missed a step and fell, striking the back of his head.",1
"An employee was separating meat from its casing using an air injecting needle when his hand slipped and the needle penetrated his cut-resistant glove. Air was injected into his hand, causing swelling.",1
"An employee was removing tape from pipes at a powder coating booth.  As a pipe exited the powder coating booth, he attempted to remove the tape at the end of the pipe. His left forearm was then pulled into the pipe, receiving third degree burns that required hospitalization.",1
An employee was placing strap around a bundle of pipe. The strap broke and the pipe shifted knocking the employee backwards resulting in a lower left leg fracture.,1
"An employee was rigging a crane to pick up a piece of channel off the top shelf of a material rack.  The employee was using a 4-foot step ladder.  While stepping down, the employee missed a step and fell to the ground. The employee sustained a femoral neck fracture of the right hip and was hospitalized.",1
"An employee fell to the floor while walking down a hallway, suffering a broken hip.",1
"Employees were repairing a cooling unit on a new oil tank battery when a piping union failed and struck the injured employee, who suffered an amputation of the right leg below the knee.",1
"An employee was conducting truck maintenance when his left index finger was caught between the truck bed tailgate and a floor jack, requiring hospitalization and surgery.",1
"An employee was repairing an electrical part on a turning machine when he came into contact with the exposed, 480-volt live electrical part, resulting in an electric shock on his right hand. The machine was not locked/tagged out at the time.",1
"An employee was loading a CNC lathe with a metal rod when his left hand was caught between the rod and the machine, requiring hospitalization.",1
"An employee was removing items from a box when he stumbled, fell, and broke his left arm.",1
An employee was spreading material for footing when a crane that was holding the material reversed and caught the employee's right thumb between it and a 4 x 4. The employee's right thumb tip was amputated.,0
"An employee was using a stand up forklift to move pallets of product in the warehouse. The employee lost control of the forklift, jumped off and was pinned between the forklift and a steel beam. The employee suffered a fractured pelvis, pinched arteries in her leg and severe trauma to her lower extremities.",1
"An employee slipped on some water that was on the floor and fell, breaking her kneecap.",1
"An employee was moving a pallet jack out of the way when his left leg was pinned between the pallet jack and a rack, breaking it.",1
"An employee was preparing to buff the inside of a flange. He set the buffer down inside the tower while the section was being rotated. He noticed that the buffer cord was going to be pinched between the tower section and a stop, so he attempted to grab the cord. The tower section then amputated his right little finger at the first knuckle.",0
"An employee opened a door and was walking into a building when she slipped on the wet ground surface and hit her head, suffering a brain bleed.",1
An employee was using a rolling ladder to access inventory and slipped on the third step and fell backwards breaking her leg in two places.,1
An employee's right hand was inside a pneumatic-powered slide gate of a blender clearing debris when the slide gate valve amputated the employee's index finger.,1
An employee amputated a fingertip with a manual paper cutter.,0
An employee suffered third degree burns on the back and lesser burns in the armpit area while torch cutting on a bolt.,1
An employee was using a chain and tractor to pull a tree down when the tree fell and pinched the employee's hand between the tree and the tractor. The employee suffered broken bones in the hand.,1
"An employee was cleaning the production floor with acidic chemicals. He was pouring the chemical into a bucket to dilute it when it entered a hole in his glove and contacted his finger, causing a second degree burn that required hospitalization and a skin graft.",1
"An employee was removing an outrigger pad from the far right front side of a rough terrain crane when the employee was pinned between the crane and a trailer, suffering a fractured pelvis.",1
"An employee was trying to remove a jammed piece of wood from a saw when the saw caught the wood, resulting in a fracture of the employee's forearm that required hospitalization and surgery. The saw was running at the time of the incident.",1
"An employee was trying to hitch a trailer to a floating boat dock when his hand was caught between the dock and the trailer, suffering severe bruising and a laceration.",1
"A crew was in the process of putting a sub-spreader beam in place so that they could raise the rig floor. An employee's hand was resting on the spreader beam when the derrick hand pulled the beam from its stowed position. The employee's small finger was then caught between the spreader beam and the sub leg, amputating his fingertip.",0
"An employee was attempting to move a kiln car to add materials to the burner when his right arm was caught between the wall and the kiln car, causing skin to be removed from his arm.",1
"An employee slipped and fell on ice in the parking lot while walking toward the building, breaking her hip.",1
An employee sustained a head injury after being struck by a falling object from a storage rack.,1
"An employee was removing a 66-pound slug out of a machine. The employee had a jack under the slug and was attempting to put a washer on when the jack slipped, causing the slug to fall and hit the employee's right middle finger. The employee's fingertip was amputated.",0
"On 3/30/2018, an employee was operating a chop saw when the employee's left hand contacted the blade, requiring a surgical amputation of the index finger.",0
"An employee had just finished mopping the floor when she tripped on her shoe lace and fell to the ground, fracturing her left femur.",1
"An employee was riding up in a scissor lift when the employee's finger was caught between the lift and a piece of conduit, amputating the fingertip.",0
"An employee was feeding handrails into a bending machine when his gloved right hand went into the machine, amputating the first digit of one of his fingers above the knuckle.",0
An employee was airing a tire when the tire burst and debris fractured his hand.,1
"An employee was installing a view point on a chamber body when he lost his footing, slipped, and fell, fracturing his hip and requiring hospitalization.",1
"An employee was feeding wires into a wire stripping machine when the employee's right hand was caught in the machine, lacerating two fingers.",1
"An employee was working on an escalator when he was struck by an escalator step, lacerating his left lower leg.",1
"An employee was performing HVAC maintenance at the ceiling level. While he was moving his fall protection lanyard from one side of a beam to another, the working surface on which he was standing collapsed. He fell to the floor, breaking three ribs and his scapula.",1
"An employee was cleaning a work area with a hose when the lid of a batter machine came down on and broke the employee's left ring finger, requiring hospitalization.",1
An employee received burns to his face due to an aerosol spray paint can explosion.,1
"An employee was using a table saw to cut lumber when the saw back fed and then became stuck. As he tried to unjam the saw, the blade contacted his left hand, amputating two fingers.",0
"An employee was performing preventive maintenance on a piece of equipment when the employee's right middle finger was caught between the drive chain and sprocket, resulting in the amputation the employee's right middle fingertip.",0
"An employee was dismantling a scaffold system when a cable line supporting the counterweight for the scaffold broke. This caused the counterweight to suddenly drop and catch the employee's left thumb and index finger between the weight and a steel cross beam, resulting in the amputation of the thumb at the first knuckle and fracture of the index finger.",0
"Two employees were transporting a container of hot grease when one employee tripped, causing the grease in the container to spill to the concrete. She then fell onto the hot grease, receiving multiple burns to the hands and feet.",1
An employee slipped and fell on ice in the parking lot. He injured his knee and required surgery.,1
"An employee had just completed slicing deli meat for a customer when he moved his hand and came into contact with the slicing blade, resulting in a partial amputation of his right index finger.",0
"An employee stood up and struck the top of the head on a pallet rack, then fell and struck the side of the head on a pallet. The employee was hospitalized.",1
"An employee was setting up the maze for customers to enter the ski lift area when the employee slipped on ice, breaking the left ankle.",1
"An employee was mounting tires when his right index finger was caught in a pinch point, amputating his fingertip.",1
"An employee entered a tower and was vacuuming out adsorbent that was stuck to the inside walls when the adsorbent became detached from the wall and engulfed the employee. The employee suffered upper body trauma and partial asphyxiation, requiring hospitalization.",1
"An employee fell while installing drywall, striking the back of the head and neck on a step.",1
"An employee was dismantling a pump.  As bolts were removed from the housing, hot water released from the pump, making contact with the employee. The employee suffered burns to the head, neck, arms, trunk, chest, hips, and thighs.",1
"An employee was performing preventive maintenance on conveyor belts and checking a malfunctioning belt when his finger was caught between the belt and the conveyor frame, amputating his fingertip. The conveyor was running at the time.",0
"An employee fell while providing a ski lesson, suffering a collapsed lung and possible rib fractures.",1
"An employee was operating a self-dumping hopper when the employee's hand entered a pinch point as the hopper emptied, resulting in a partial fingertip amputation.",1
"Employees were trying to contain a fire at the bottom of a silo using a water hose. After they contained the fire, an employee opened the silo's side door and a small explosion occurred. One of the employee's suffered second degree burns on the forearms and face (right side).",1
"A pallet in the vicinity broke, causing a 12-foot high stack of pallets containing gas meters to fall and strike the injured employee's work station. The injured, temporary employee was struck in the chest resulting in hospitalization of a partially collapsed lung.",1
"An employee was in a vessel's freezer offloading frozen fish cargo when his left arm became caught between two conveyor belts on the freezer carousel, crushing his left arm from the hand to the bicep. He was hospitalized.",1
An employee was walking by a dolly of milk that was rolling down a chute when the dolly fell over onto the employee. The employee potentially suffered a collapsed lung.,1
"An employee was on skis patrolling the mountain at the end of the day. As the employee transitioned from groomed to ungroomed terrain, the ski binding failed and one ski came off. The employee lost control and pitched into a lift tower, losing consciousness momentarily and suffering broken ribs, a lacerated kidney, and a collapsed lung.",1
"An employee was walking down the stairs with his lunch when he tripped and fell approximately two to three steps, landing on his left shoulder. He suffered a closed radial head fracture and was hospitalized.",1
"An employee was attempting to put a catheter into a cat when the cat bit her hand. The bite became infected, requiring hospitalization.",1
"An employee was spotting for a forklift driver during pallet reorganization when the reversing forklift struck her, breaking her right leg. She was hospitalized.",1
"An employee was walking when he tripped over rails on the floor and fell, striking his head on pieces of equipment. He suffered head lacerations, requiring sutures and hospitalization.",1
"An employee was heating up a yoke nut on a piece of equipment. When he removed the nut, the differential fluid flared up and burned his face and hair.",1
"An employee was operating a service rig when a natural gas explosion and fire occurred, burning the employee's face and neck.",1
"While installing decorative stone on an exterior wall, an employee became dizzy and fell from a 6-foot ladder to the ground, suffering lacerations and possible fractures on the face and head.",1
"An employee was trying to move a pallet when his left pinky finger was caught between the pallet and a rack, resulting in a fingertip amputation.",1
An employee was climbing a ladder to access the ladder jack scaffolding when the employee either tripped or slipped when stepping on the plank and fell. The employee suffered chipped vertebrae in the back.,1
"An employee was on a ladder approximately 7 feet off the ground, using a reciprocating saw to cut a pipe that was hanging from the ceiling. The end of the pipe was not secured, and when the cut was nearly completed, the far end of the pipe swung down and hit the ladder out from underneath the employee. He fell to the floor and landed on his head, suffering a head injury, scratches on his back, and a bloody nose. He was hospitalized.",1
An employee was pulling meat off a conveyor belt when the belt amputated the employee's right middle fingertip.,0
An employee was sorting debris from a conveyor line when his left index finger was caught and lacerated between the belt and a piece of metal pipe.,1
"While running timed laps on a track, an employee slipped on a wet patch and fell to the pavement, fracturing the left tibia.",1
"An employee was cleaning a packaging machine when the machine started. The employee's right index finger was then caught between the machine's sealer bars, resulting in amputation.",0
"A temporary employee was walking down the metal steps of a horizontal side sheet when he slipped and struck his face and abdomen on a roller. He suffered a chin laceration, fractured nose, and bruised abdomen on the right side.",1
"An employee was attempting to tie his shoe when he lost his balance and fell onto the corner of a three-bay sink, fracturing multiple ribs on his left side and suffering a collapsed lung. He was hospitalized.",1
"An employee walked back from her car, slipped on wet snow, fell to the parking lot, and broke her right ankle.",1
An employee was helping to remove wind screens from around the rig when his right little finger was caught between a wind screen and an eye on the side of the doghouse. His right little fingertip was partially amputated.,0
"A maintenance employee was walking when he fell on some ice and struck his head, suffering swelling and bleeding that required hospitalization.",1
"An employee was operating a roof cutter when the employee's left middle finger was pinched between the roof cutter's crank shaft and a metal plate, resulting in a partial traumatic transphalangeal amputation.",0
"An employee was inserting a plug into a 12-inch valve when the tip of his gloved thumb was pinched between the plug and the body of the valve, resulting in a possible amputation.",0
"An employee miss-stepped while coming down a portable step ladder and fell to the ground, fracturing the right leg.",1
"While hooking a chain to a ladle, an employee was struck in the head by a piece of falling slag, suffering a concussion.",1
"An employee was operating a table saw when the material kicked back. His hand then contacted the sawblade, amputating his left index finger at the second digit and his middle finger at the first digit. His pinky was also crushed.",1
"An employee was connecting structural steel at a height of 13 feet when a piece of steel that was coming toward him bumped the steel he was standing on. He lost his balance and fell to the ground, fracturing both wrists and his right elbow.",1
"An employee was attempting to remove a pipe from a waterline when the pipe moved and caught his foot, fracturing it.",1
"An employee was going to use a forklift to push down a dock plate. The employee's head struck the forklift when it came into contact with the dock plate, suffering a head contusion that required hospitalization.",1
"An employee slipped on ice and fell to the sidewalk while walking to the front door, fracturing her wrist and forearm.",1
"An employee was re-installing ceiling tile from a ladder when the employee fell approximately 10 feet to the floor, suffering a spinal fracture, broken collarbone, and broken ribs.",1
"An employee was running from a dog while delivering a package when the employee leapt or fell into a vehicle, suffering back and knee injuries. The employee suffered a cut to the knee that required surgery.",1
"An employee was turning a pallet full of molds when his right hand went between a pallet and the backstop. When the pallet rotated, his right thumb tip was caught and amputated in the pinch point.",0
"An employee was installing MC cable from an extension ladder. The ladder feet slipped out as the employee stepped up a rung on the ladder. The employee fell to the floor, suffering sprains and torn ligaments in the ankles.",1
An employee was operating a pneumatic nail gun when it fired a nail into his knee.,1
"An employee was leading a ski lesson when his ski became caught in soft snow, causing him to fall to the ground and fracture his hip.",1
An employee was loading packages inside a trailer when she slipped and struck her left-side ribs against a roller. She suffered fractured ribs and was hospitalized.,1
"An employee was walking through a doorway where a plastic parking lot boundary stake (approximately 3 feet in length) was laying on the door threshold, propping open the door. The employee stepped over the stake to exit. When she returned to re-enter the door, she went to reach for the stake to move it and fell face forward, hitting her chin and landing on the concrete floor in the vestibule. She fractured her shoulders.",1
An employee was replacing a hydraulic hose on a mobile log lift machine when the main boom of the  machine came down and caught the employee's right arm between the boom and the machine frame. The employee suffered right arm lacerations and was hospitalized.,1
"An employee was disconnecting 440-volt, 3-phase temporary power when an arc flash occurred. The employee suffered arc flash burns over 18% of the body.",1
"An employee was pulling a cart through a cooler swing door when the employee's foot became caught on the cart wheel and the door. The employee lost balance and fell to the floor, fracturing the left hip and left humerus and requiring hospitalization.",1
"An employee was cutting a wooden board when the saw kicked back and lacerated his left thigh, requiring hospitalization.",1
An employee was on 8-foot ladder removing sheetrock from a ceiling in a room with 10-foot ceilings. The ceiling gave way and fell hitting the ladder. The employee then fell and broke his foot and wrist.,1
An employee was standing on the rig floor when a chain broke while cement was being piped into the casing. The broken chain struck the employee on the hard hat resulting in a laceration and a possible eye socket fracture.,1
"An employee was waiting for a production line to finish. The employee's right hand was on the hoist controls when the employee's pinky finger became caught in the hoist clasp, resulting in a fingertip amputation.",0
"An employee was operating a forklift inside a trailer. As he backed out of the trailer, the trailer pulled out from the dock, causing the employee to fall onto the ground with the forklift. He hit his head and received a concussion, requiring hospitalization.",1
"An employee was kicking pipe that was being loaded on a pipe rack when a joint of pipe began rolling toward him and another worker. He attempted to stop it, but the pipe rolled over his foot, resulting in an open fracture of the tibia and fibula.",1
"An employee was working on a centrifuge on top of a centrifuge stand. The employee lost footing while stepping down from the centrifuge and fell backward into the handrails. The hand rails gave out, causing the employee to fall approximately 12 to 15 feet to the ground. The employee suffered bruised muscles and a pinched nerve in the buttocks.",1
"An employee was moving a pallet to turn it in a different direction. A nail gun was about to fall and the employee tried to catch it. As the employee reached for the nail gun, the trigger was activated and the nail gun discharged a nail into the employee's right thigh.",1
"While climbing a ladder, an employee missed a step and fell backwards onto a concrete slab, suffering a concussion.",1
"An employee was loading bushings (a part used in the manufacture of commercial truck suspensions) into a hydraulic press when his hand went between the bushing and the piston of the hydraulic press. His left index finger was crushed, requiring hospitalization.",1
"An employee was standing on the engine compartment of a manlift lining up the holes on the boom to apply the pin. As another worker hit the pin, it vibrated and caused the employee to lose his balance. He fell 7' 3"" to the ground, fracturing his right wrist, dislocating his left collarbone, and suffering two contusions to the back and front of his head. He was hospitalized.",0
"An employee was moving a metal ring when the employee's left hand was caught between the ring and a metal platform, amputating the tip of the employee's left-hand middle fingers.",0
"An employee was working on a packaging machine when his right thumb was caught in the chain drive, fracturing and partially amputating his thumb at the distal first phalanx.",0
"An employee was on a ladder (fourth rung) cutting ductwork loose when a piece of the ductwork became caught on an internal metal liner. The ductwork then swung to the side, knocking the employee to the ground. The employee broke both wrists.",1
"An employee was unloading steel roofing panels at a construction site using a forklift with a spreader bar. The mast was fully extended when the forklift tipped forward. The employee's head struck the steel cage, suffering lacerations and a possible orbital fracture.",1
"An employee was forming parts with a press brake when his left hand slipped on a part. His left index finger was then pinched between the tool and the v-die, resulting in a fingertip amputation.",0
"An employee was helping another employee load metal onto a truck when the metal load shifted and fell on his left leg, amputating it below the knee.",0
"An employee was walking when she slipped on the floor surface. As she tried to catch herself, her right hand entered a hot oil container from fryers that were being cleaned. She suffered burns to her right hand and arm.",1
An employee was installing wall ties when he stepped on a non-scaffold-grade board and fell approximately 20 feet through to the ground below. He suffered back pain and was hospitalized.,1
"An employee lost his balance and fell, hitting his head.",1
"An employee was closing the sliding door of a trailer when his right middle finger was caught in the door, severing his finger pad.",0
"An employee was operating a crane and connecting a jib to the main boom when the jib unhooked from the boom, causing it to strike his head and shoulder. He broke his sternum and L-3 vertebra.",1
An employee was working on the brake pads underneath a broom (equipment vehicle) when something fell and struck the employee. The employee suffered a broken right arm and was hospitalized.,1
An employee was making adjustments to a bender machine when the employee's right ring finger was pinched and amputated between the bender's carriage and bracket.,0
"An employee was gathering a 3/4"" thick, 3' to 4' in diameter piece of plywood from a stack of approximately 9 similar pieces of plywood when the stack tipped over and struck the employee, pinning him against a forklift. He sustained a fractured jaw, fractured ribs, laceration to the lip(s), and broken teeth, requiring hospitalization.",1
An employee was transferring sanitizing chemical between storage totes and splashed chemical in their face resulting in chemical burns to the face and eyes.,1
"An employee was pre-inspecting a powered industrial truck when he slipped on hydraulic fluid and fell to the floor, injuring his head, back, and hip.",1
An employee was testing the assembly of a blade part on food processing equipment. He was leaning on a chest-high conveyor while his left hand was between the conveyor and the blade when the blade toggle switch was turned on. The blade then cut and amputated his left index finger and thumb.,0
"On April 4, 2018, an employee was moving material on a pallet jack when a crate of material began to fall over. As the employee attempted to stop the crate from falling, the employee's right pinky finger was pinned by the material, resulting in an amputation.",0
"An employee was gathering samples of frozen chickens that were being conveyed on a product freezer belt to a plastic scrapper when her right index finger was caught in between the scrapper and the conveyor belt, resulting in a fingertip amputation. The nip point between the scrapper and belt was unguarded at the time of the incident.",0
"An employee tripped on a pull chain that moves wood up to a resaw and fell against the machine. While attempting to push themselves back up, the employee felt a pop in the lower back, requiring hospitalization.",1
An employee was performing a strenuous rough march when he collapsed. He was hospitalized with a muscle injury and kidney stones.,1
"An employee was installing a water jet holding fixture into a water jet when the fixture became slightly misaligned with the left locating pin. When the fixture was lined up and fell into place, the employee's glove and right middle finger were caught in a pinch point between the fixture base and the bed of the water jet, resulting in the amputation of the distal tuft of the right middle finger.",0
An employee was operating a punch press to cut a bracket and amputated the left index finger.,1
"An employee was using a three-step ladder to remove product from a bin when the employee fell to the floor, fracturing the right knee and requiring hospitalization.",1
"An employee was working on trusses when the ladder slipped out from under him. He fell approximately 14 feet onto concrete, fracturing a heel, a shin, and the L4 vertebra.",1
"An employee was sliding a mechanical seal/sleeve onto a shaft. The shaft has a small groove with sharp edges. The employee's hand was on the shaft with his finger in the groove. When the employee slid the mechanical seal/sleeve on the groove, it amputated his right index fingertip.",0
"An employee was filling heaters in a filler and moving to a capping machine when the employee's middle finger was smashed between a cartridge heater and the machine press, resulting in a partial amputation.",0
"On April 4, 2018, at approximately 8:30 p.m., an employee was cleaning a pizza dough sheeter machine's rollers when his right pinky finger was caught in the rollers, resulting in a medical amputation at the first knuckle. The machine was not locked/tagged out at the time of the incident.",0
"An employee was operating a pneumatically actuated chop saw when his left hand entered the table opening where the blade comes up from below the table. The foot pedal was pressed and the saw actuated, amputating his left thumb just above the first knuckle.",1
"A security guard was trying to detain a customer in the employee break room when the customer grabbed the security guard's gun holster and pulled the gun's trigger, shooting the security guard in the left lower calf.",1
"An employee was attempting to adjust a belt on an exit conveyor when the belt pulled his left middle finger in and around the pulley, amputating his fingertip. The conveyor was running at the time.",0
"An employee was unloading tools from a truck when he fell off the truck and landed on his left side, suffering bruised ribs and a collapsed lung.",1
An employee was reinstalling wiring on a lowboy trailer. The door on the hydraulic compartment was open. Strong winds from a storm blew the hydraulic compartment door shut and the employee's right hand was caught in the door resulting in amputation of the middle fingertip.,0
"An employee was grinding material with a handheld grinder when the grinder slipped from his hands and fell on his left foot, lacerating it and requiring stitches.",1
"An employee was attempting to attach a lifting clamp to a steel flange plate when the plate fell approximately 6 inches, pinching his fingertip between the ground and the plate. As he pulled his hand out of the pinch point, the fleshy part of his fingertip ripped off of his finger.",0
"An employee was attempting to shackle the right rear leg of a cow when the cow kicked the employee's head, resulting in a concussion.",1
"An employee entered a scrap dumpster to remove metal scrap. As he was attempting to remove metal scrap, an aluminum table in the dumpster fell, striking and knocking him down into the bottom of the dumpster. He was pinned by the aluminum table and unable to free himself, suffering a head contusion and back injury/strain. He was hospitalized.",1
"On April 4, 2018, an employee was leaving the kitchen when the employee's left hand was caught on the hinge side of the service door, crushing the pinky finger and resulting in a fingertip amputation.",0
"An employee was pulling a hand truck of soda up the steps to deliver to a customer. At the doorway, the employee stepped on a brass plate that was wet, slipped, and fell, tearing the quadriceps muscle.",1
"An employee was operating an industrial table saw to cut a metal part when the saw kicked back and struck the employee's left hand, amputating three fingers.",1
"At approximately 11:15, an employee was stepping up onto a curb in front of the elevator lobby on the G2 level of the garage when he slipped on a wet walkway and fell onto his knees. After he fell, he could not bend his knees or get up. He tore a knee tendon and was hospitalized.",1
"An employee was cleaning a kettle and added chlorine to the hot water and chemicals that were already in the kettle. When he added the chlorine, the water bubbled up and burned him, requiring hospitalization.",1
"An employee was attempting to cross the road to pick up a trash can when a driver swerved around a car in front of him, and struck the employee, who suffered minor bruising.",1
"An employee was cutting carbon steel on an automated bench saw when he lost consciousness and fell, striking his head on the concrete floor. He suffered a laceration, concussion, and hematoma to the head.",1
An employee was conducting housekeeping operations around a wood chipper when the employee's hand potentially became caught in the wood chipper conveyor. The employee suffered amputations of the pinky finger and ring finger.,0
"An employee was hand feeding strips of steel into a full-revolution press and punching out multiple parts from a single strip. He was trying to remove the raw material skeleton blank from the die when the press cycled, causing the die to close on his hand. The die came to a stop at the bottom of the stroke, trapping his hand in the die and severing his left middle fingertip.",0
"An employee was standing outside a potato truck and pulling a mat that was under some potatoes when the mat broke, causing him to fall and land on a railing. He broke his left leg and arm.",1
"An employee was removing an existing concrete culvert with an excavator when the concrete culvert broke, causing a jolt to the employee, who suffered five fractured ribs.",1
An employee was rinsing out the methanator tank from the top portal opening when the employee lost consciousness. The employee recovered and was helped down by other employees at the job site.,1
"An employee was using a handheld shovel to level out a ditch for a retention pond pipe. At the same time, an off-road truck was being loaded beside the retention pond. A rock (2 to 3 inches in diameter) then fell off the dump truck and rolled downhill into the ditch, striking the employee. The employee suffered back and left side injuries.",1
"An employee was cutting wire with a quickie saw to remove the core of a storm drain structure. When he got to the last wire, the concrete fell on the saw and knocked it out of his hand.  The saw landed on his left ankle, lacerating it.",1
An employee was adding a belt onto an HVAC unit when the employee's right ring finger was caught between pulleys and consequently amputated.,0
An employee working with pallets began to have chest and rib pain.,1
"An employee slipped on an ice patch while walking across the parking lot, suffering broken ribs and a punctured lung.",1
An employee was operating a rebar bending machine and caught their glove in the machine's roller resulting in a degloving injury.,1
"An employee was manually pushing a conveyor part to prepare the line for a pallet transport when his right pinky finger was pinched between two conveyors, (one belt, and one gravity roller conveyor) that were not running at the time; resulting in a fingertip amputation.",0
"An employee was working at the log deck of the hew-saw. He was attempting to free a stuck log when the rotary feeder pushed the log, causing his left foot to become pinned between the log and the wall of the equipment. This resulted in a fracture to his left foot, requiring hospitalization. The rotary feeder was in operation at the time of the incident.",1
"On 4/05/2018, an employee was in a car accident due to ice/slick roads. He broke his arm and was hospitalized.",1
"An employee was walking from her car when she fell on some steps outside the cafeteria and landed on the ground, striking her head and suffering a brain hematoma. She was hospitalized.",1
"An employee was helping a coworker drill out bad grain with an electric drill when the employee's loose-fitting glove became entangled in the drill's chuck. The employee suffered fractures to the left index, middle, and ring fingers; a laceration to the left index finger; and a subsequent amputation of the left middle finger.",0
An employee slipped on ice and fractured his ankle.,1
"An employee was moving a trash can when he tripped and fell, potentially suffering multiple leg fractures.",1
An employee was operating a spring forming machine to cut a compressed piece of wire when a piece of metal flew and struck the employee's chest. The employee suffered broken ribs and internal organ damage that required hospitalization.,1
"An employee was using a stand-up reach forklift to unload material. As the employee backed up, he was pinned between the forklift and a wall. He tried to exit the forklift but suffered a broken pelvis and internal bleeding.",1
"An employee was hooking up a mail transporter to a tow motor. He was holding onto an APC (all purpose container), using his foot to connect the second APC to the tow bar, when his foot became tangled in the tow bar and caused him to fall. He held onto the APC to prevent his fall and dislocated his right shoulder, requiring hospitalization.",1
"An employee was securing the roof of a manufactured home from the rear of a mobile scaffold when the scaffold moved, causing him to lose his balance as he was walking toward the catwalk. He then fell 9 feet to the ground through a gap between the mobile scaffold and the catwalk, fracturing his collarbone and requiring hospitalization.",1
An employee was watching a mini excavator operator drive the equipment when the excavator ran over and fractured the employee's right leg.,1
"An employee tripped and fell as he was walking around and troubleshooting a machine. His left hand landed in the machine, and his index finger became trapped in a gear. The gear amputated his left index finger at the second knuckle.",0
"An employee was descending from a ladder with a drill while a second employee was on the ground. As the first employee came down, his drill caught and cut the second employee's neck.",1
"While moving a box with parts, an employee tripped over the corner of a pallet, fell, and hit the corner of the table. The employee suffered hematoma to the left breast area and a knee, as well as a blood clot.",1
An employee was finishing delivery to a customer's home. The employee's left thumb was crushed in the gate on the back of the truck while closing it.,1
"An employee was adding mortar to a mixer when he noticed some build-up inside the mixer. He was attempting to clean the build-up when the mixer's rotating blade caught his gloved left hand, amputating his index finger and damaging his middle finger (possible amputation).",0
"An employee was running a peeling machine when he noticed some scrap foam by the blade. As he attempted to remove the scrap, his left hand was caught by the blade, cutting his pinky, ring, and middle fingers. The machine was running at the time of the incident.",1
"An employee was performing a take-off above a ceiling measuring duct. The ceiling was 2 x 10 plywood decking with plywood below. He walked off the plywood and slipped and fell through the sheetrock ceiling, striking and lacerating his head on a pile of material.",1
"An employee was operating an idle roller. The brackets failed and the idle roller struck the employee, resulting in contusions.",1
An employee was trying to fix a roller on a conveyor belt when the rollers caused an amputation/crushing injury to his left hand. The conveyor was running at the time.,0
"An employee was closing a gate on an APC when the secondary safety latch released, causing the upper shelf to fall and strike the middle section, which then fell onto the employee's right hand. The employee's right hand was crushed, suffering a fracture and swelling.",1
"An employee was using a ""tugger"" to help another employee move two-tier racks with a forklift. The forklift knocked over the top tier of racks. The employee using the tugger fell while getting out of the way of the falling racks or the racks struck the employee and he fell. The employee sustained a fractured jaw.",1
An employee was working on a scaffold when he fell approximately 60 feet through the boards he was walking on to the ground.,1
An employee was cleaning a flower bed and was bitten by a rattlesnake on the left index finger. He was hospitalized.,1
An employee's right foot was run over and crushed by a forklift being driven by another employee.,1
An employee was performing a drill outside and changing his SCBA tank when he stepped against a curb and tripped. He fell and fractured his hip.,1
"After installing a camera system inside the cab of a truck, an employee mis-stepped while using the cab's ladder to exit and fell to the ground, fracturing his right pelvis. He had tools in his hand at the time.",1
"An employee was on a roof attempting to remove a piece of underlayment when the employee stepped back and fell from the roof to the ground, suffering fractured ribs.",1
"An employee was rinsing (spraying water) down a piece of equipment (pump) when he attempted to remove a piece of pipe. He removed a clamp from the pipe, and his finger entered the pipe. A blade (flight) that moves water inside the pipe then amputated his left middle finger at the first joint.",0
"An employee was standing on an out feed table stacking boards when the fork carriage moved forward, catching his left leg between the fork carriage and a roll case. His left leg suffered a laceration/fracture. The out feed table was not locked/tagged out at the time.",1
An employee was nailing framing above his head at a residential property when the nail gun fired a nail into his head. He was hospitalized and had brain surgery.,1
"An employee was installing a unitizer when he lost his footing on non-powered conveyors and fell to the cement walking surface, breaking his left elbow.",1
"An employee was hanging a sign while working from an extension ladder when the hooks for the fly section slipped, causing the ladder to drop. The employee fell and contacted an intermediate shelf, suffering a concussion.",1
"Employees were unlatching a trailer when the trailer moved, catching the injured employee's left index finger between the truck and the trailer hitch. The employee's fingertip was amputated.",0
"An employee was using a chop saw when the guard broke. The saw then cut his fingers, resulting in one partial finger amputation and one finger laceration.",0
"An employee was walking by a pallet jack when a box fell off the top. She attempted to avoid the box and tripped over her own feet, fracturing her upper leg.",1
"An employee was lifting a metal grate off the top of a ribbon blender when the grate slipped. The employee almost dropped the grate, which tipped toward the back of the ribbon blender. His hand slipped down to the bottom of the grate where his finger became pinched between the grate and the stop point of the gate. His left small fingertip was amputated.",0
"An employee was walking between vans in the parking lot when he lost his balance on uneven pavement and fell, breaking his hip.",1
"An employee was trying to manually rotate a shackle that was turned in the wrong direction when his right hand was caught in the in-line shackle turner to his right, crushing his right index finger. He was hospitalized and had surgery.",1
"An employee was moving a chip cart to a chip pit to have the metal chips dumped when the employee fell approximately 3 feet into the pit, landing on a bin. The employee suffered a partial amputation of the left middle finger, bruising, and a possible broken rib.",0
"On April 6, 2018, an employee was coming down after installing cameras and walking along the joists at a front entrance when he missed a joist and fell approximately 10' to the concrete below. He suffered an internal brain bleed, requiring hospitalization.",1
"An employee was driving a powered industrial truck (PIT) in reverse. The employee's hand was outside of the PIT when it came into contact with a skid, crushing the employee's index and middle fingers and resulting in two fingertip amputations.",0
"An employee was operating a forklift when his left leg went outside of the forklift and was pinned against a guardrail, fracturing his left ankle.",1
"On April 6, 2018, an employee was descending a stair to an airfield when she fell to the ground, hitting her head on the concrete floor and suffering a skull fracture, concussion, and cranial hemorrhage.",1
An employee was operating a wood notching machine (notcher) when the blades or delta heads of the notcher amputated three of his right middle fingers. The blades were unguarded and the machine was running at the time of the incident.,1
An employee stepped into an equipment curb area (approximately 6' x 10') that had a roof opening (approximately 2' x 5') that was covered with plywood. The plywood was not secured and moved. The employee then fell through the opening approximately 15 feet to the level below.,1
"An employee was unloading pipes off the back of a truck. As the employee removed a section of pipe, the 2 x 3 wood spacer that was in place between the pipes came loose and struck the employee in the head. The employee was hospitalized with a skull fracture.",1
"An employee was attempting to use a conduit seal-off tool to push a dart when the dart struck his left leg above the knee, breaking his femur.",1
"An employee was bending metal using a press brake when his right hand was caught between a piece of metal and the press brake, breaking four fingers. He was hospitalized.",1
"Two employees were working together to lower a transformer hood. One employee let go of the hood and it fell onto the injured employee's hand  amputating the left middle finger's distal phalanx, second digit.",0
An employee was holding a door when wind blew it. The door then caught and caused an amputation to the employee's left ring finger.,0
"An employee was removing concrete forms from the top of a company truck when he lost his balance and fell to the ground, fracturing his ribs and requiring hospitalization.",1
"An employee was escorting a person to inspect equipment on the roof when the employee slipped and fell on ice, fracturing the left femur.",1
An employee was descending a ladder from the roof when the employee fell to the concrete pavement below.,1
"An employee was manually loading a delivery truck with 65-pound tractor trailer jack stands when the employee's left middle finger was caught between two jack stands, amputating approximately 1/2 inch of the finger.",0
"An employee was removing a coupling on a steam valve. The valve was under pressure, and when the steam was released, the coupling hit and crushed his right middle finger.",1
An employee was cutting lettuce with a standard chef's cutting knife when the blade amputated the employee's thumb tip.,0
"While cutting grass on a zero-turn mower, an employee fell approximately 10 to 16 feet from a box culvert to the surface below, suffering severe injuries.",1
"An employee was removing cargo straps from the truck on a flatbed, low-profile trailer. The employee sat on the edge of the trailer, which was approximately 4 feet above the ground, and dismounted. Upon impact with the ground, the employee fell and fractured the right hip.",1
"An employee was lifting a cooler that he thought was empty (but was packed with utensils) when he lost his balance and fell, injuring his lower back.  He was hospitalized and had surgery.",1
An employee was operating a grapple truck and loading 30-foot sections of railroad track at the storage yard. The end of the rail struck his abdomen and pinned him against the truck seat while he was attempting to load the rail on the truck. He suffered a traumatic hernia of the abdominal wall.,1
"An employee was struck by a reversing forklift while walking to a building, suffering a broken leg and broken ribs. The employee was hospitalized.",1
"While cleaning equipment, an employee fell from the steps and struck their head against a machine, suffering head trauma. The employee also suffered a twisted leg/hip.",1
"On 4/7/2018, at 2:30 p.m., an employee was stripping concrete dismantling form-work. He removed a U-bolt and was climbing down a shoring frame when he slipped and fell about 10 feet to the ground, fracturing his left wrist and requiring hospitalization. He was wearing harness and lanyard and was anchored to the shoring frame at the time of the incident.",1
An employee was operating a forklift when it tipped over while making a turn. The employee was tossed from the cab and pinned at the waist between the top frame of the lift and the ground. The employee was hospitalized with crushing injuries.,1
"An employee was walking alongside a forklift that was carrying panels when he lost his balance and tripped. The forklift ran over his foot, causing fractures that led to a medical leg amputation 6 inches below the knee.",1
"An employee was descending a ladder after washing windows when one foot of the ladder sank into the dirt, causing it to shift sideways. The employee then fell off the ladder to the ground, fracturing two ribs and requiring hospitalization.",1
"An employee was driving a tow motor and stopped it. He stepped off of the tow motor and it began to move. He tried to stop it but slipped, and the tow motor struck him. He suffered broken ribs, a concussion, and cuts.",1
An employee was operating a machine that clamps onto a metal-framed brush and drills holes in it when her fingertip was caught in the clamp. She suffered a partial amputation of the left ring finger.,1
"An employee was crossing a road when she tripped on the pavement and fell forward, injuring both hands and her stomach.",1
"An employee was using rope to lower a pallet jack to a lower level when the employee's right pinky finger became tangled in the rope, resulting in an amputation.",0
"An employee was raising a pendant crane when the hook became caught on a spacer block and knocked the other blocks over. The blocks rolled to the floor and onto the employee's feet, fracturing both.",1
"An employee was taking a cart with trash to the dumpster when her foot was caught on the cart, causing her to fall to the ground and fracture her right hip.",1
"On April 7, 2018, at about 10:15 a.m., an employee was on a ladder placing a drip pan under a mezzanine. He was descending the ladder when the drip pan moved out of place and hit the ladder, causing him to fall from the ladder onto his left arm. He suffered a compound fracture to the left arm and was hospitalized for surgery.",1
"An employee twisted to reach for something while working at the counter and experienced severe back pain, requiring hospitalization.",1
"An employee was transitioning off the ladder onto the lower roof, lost his footing and fell resulting in a skull fracture and brain swelling, a broken collar bone and a severed artery in the brain.",1
An employee tripped while climbing house steps to deliver a package. She used her left hand to brace for the fall and fractured it.,1
An employee was working from a straight ladder putting the cover on a junction box while another employee braced the ladder. The foot of the ladder slid out and dropped the employee 3 to 4 feet to the ground. The employee suffered a concussion and was hospitalized.,1
An employee was dumping a hopper on a forklift attachment. The attachment dumped the load and was returning to the upright position at the same time that the employee's left index finger was in a pinch point position. The employee's left index finger was amputated to the first knuckle.,1
"An employee was checking the granule flow from a silo to a conveyor when the silo pneumatic door closed on his right ring finger, resulting in an amputation.",1
"An employee was walking downstairs from the second to the first floor when he missed a step, lost his balance, and fell, suffering a head concussion.",1
"An employee was at the airport traveling to a training for work when she tripped over a curb, falling and hitting her knees. She fractured her right patella.",1
"An employee was swabbing a glass mold when his hand was caught by the funnel arm, burning the palm of his hand.",1
"An employee was found trapped in a conveyor belt system. The employee suffered abrasions to the right side of the head, right shoulder, and upper right back; ruptured ear drums; and left knee pain.",1
"An employee was attempting to place a harness on a boar when she was pinned between the boar and a crate, tearing ligaments and tendons in her lower left leg.",1
An employee was troubleshooting a ceramic ring that was stuck to a target when the lid came down and amputated his fingertip (no bone loss).,0
An employee's right ring fingertip was caught and amputated between a manlift guardrail and a ship ramp as a second employee was attempting to free the manlift basket from the ship ramp.,1
An employee's left hand was inside skid rail pin holes checking the alignment when the skid rail moved backwards and amputated his left middle and index fingertips.,0
An employee was completing preventive maintenance on a screw conveyor oxide reactor when the machine amputated two of his fingers and partially amputated a third finger.,0
An employee was making collars to go into the hole at an oil drilling rig when the drill collar tongue struck the middle part of the employee's body.,1
An employee suffered an upper muscle injury while exercising and conducting physical training. He was hospitalized.,1
"An employee was attaching a cable to a plug container to move it to the main rig floor. The employee had attached a hook to the plug container and was turning to continue pulling it when the employee stepped backwards into a pipe nest, falling approximately 2 feet and landing on a drill collar or pipe. The employee suffered a contusion and small crack to the right femur, requiring hospitalization.",1
"The injured employee was directing the driver of a trailer truck that was backing up into the bay to make deliveries. The driver stopped the truck and got out to see what the employee was trying to tell him. The truck then rolled backwards and pinned the employee between the dock and the truck resulting in injuries to the employee's right side inclusive of his legs, ribs, back and abdomen requiring surgery.",1
"An employee was fabricating a four-post stand. While the employee was bolting the stand together, one of the posts (weighing approximately 1,500 pounds) fell over and struck the employee's head. The impact resulted in fractures to the C6 and C7 vertebrae and a laceration to the employee's head.",1
"An employee removed the master link out of the chain supporting a counterbalance that he thought had no weight. The counterbalance then fell and struck his upper arm, lacerating it and peeling off the skin.",1
"An employee was coming down the ladder on the back of a trailer when he lost his balance and fell onto the ground, fracturing his right leg.",1
"An employee was welding a 1,000-pound beam that was sitting on two stands when the beam rolled off the stands and pinned him to the floor, injuring his right leg and right arm.",1
"An employee was walking down stairs, missed the last step and fell fracturing a hip.",1
"An employee was sanding drywall in the corridor of a building when he fell approximately 6 feet from the platform of a wheeled baker scaffold to the concrete floor, fracturing his left hip.",1
"An employee was going in and out of an attic via the access ladder when the third rung of the ladder broke, causing him to fall about 3 feet to the floor. He experienced back and shoulder pain, requiring hospitalization.",1
"While securing a load on a tractor trailer, an employee tripped on the girder and fell to the ground, suffering head trauma.",1
"An employee was using a circular saw to cut smaller pieces of wood from 2- by 3-foot wood parts. The employee was holding the wood with his gloved left hand when the saw caught his glove and pulled his hand into the blade, amputating his left thumb tip and index fingertip.",0
"An employee was walking through the WIP area when she tripped on the WIP lane divider, lost her balance, and fell to the concrete floor at the same level. She fractured her right hip.",1
"An employee was descending a ladder from the second floor of a remodeled construction site when he stumbled, lost his balance, and fell. He suffered a broken rib, shattered wrist, and a fractured hip and ankle, requiring hospitalization.",1
"An employee was using a chain to install sewer pipes with the assistance of an excavator when his thumb was caught between the chain and the pipe, resulting in a partial amputation.",1
"An employee was helping another team member move a 1/4-inch steel plate. As he was sliding the plate off the table, a piece of metal underneath the plate fell onto his right foot above the steel toe, breaking bones.",1
"An employee had been using a pressure blasting gun. As the employee was moving an aerial, the pressure gun abruptly started and the water blast hit his leg, causing a laceration.",1
"After cleaning wet grain from a bin, an employee fell 99 feet from the exit at the top of the bin, suffering a broken arm and pelvis.",1
"An employee was struck by a forklift while walking, sustaining injuries to the right heel, right knee, and the back of the head.",1
"An employee was walking down module stairs carrying a tote that was approximately 1.5 feet by 2 feet. On the last stair, she lost her footing and fell, fracturing her left knee and elbow. She was hospitalized.",1
An employee was using a knife to cut banding on flattened boxes. The knife slipped and lacerated the employee's left forearm. The laceration required hospitalization and surgery.,1
"An employee slipped and fell on ice while walking in the parking lot, breaking her leg.",1
"An employee was taking a wheeled garbage can outside to the dumpster when the wheeled base came off on the ground. The employee did not notice the wheeled base on the ground and stepped on it, which caused him to fall to the pavement and fracture his left hip. It was dark outside at the time of the incident.",1
"An employee was kneeling down next to an ice machine to unclog the drain. When the employee rotated his upper body to reach the drain, he felt a sharp pain in his lower right back. He was then unable to move. He was hospitalized with a back injury.",1
"An employee tripped over a chair leg while standing up, fell and broke the right hip.",1
"An employee was performing site preparation on a roof when he fell approximately 17 feet through a skylight to the ground. He suffered broken ribs, a broken collarbone, and shoulder injuries and required facial surgery.",1
"On April 9, 2018, an employee was vacuuming the floor at a client's house when the employee tripped over an extension cord and fell to the floor. The employee suffered contusions to the right side of the head and body, requiring hospitalization.",1
"An employee was checking measurements on a vertical mill to drill two holes in the blank channel of a lubricator part when his gloved hand was drawn into the drill bit, resulting in a left index finger amputation. The vertical mill was operating at the time of the incident.",0
"An employee was dismantling a giant theme park wheel. As the injured employee was putting a pin on a screw jack, another employee who was holding the screw jack let it go. The screw jack fell on the injured employee's finger, severing the fingertip.",1
"On April 9, 2018, an employee was cutting fiberglass with a right angle grinder when the grinder kicked back, catching and lacerating the employee's right hand between the thumb and index finger. The employee was hospitalized and required stitches.",1
"An employee was attempting to pick up a flower stem cutter when the cutting bar cut her right middle finger, resulting in a right middle fingertip amputation.",0
"An employee slipped and fell while moving an air compressor. The air compressor landed on his left his hand, pinning it to the ground.",1
"An employee was securing a forklift to a flatbed truck with a chain and bar when the bar snapped and struck him in the face, causing a laceration, nerve damage, severed artery, and salivary gland damage.",1
An employee was trimming a neck bone with a band saw when the blade lacerated his left ring and middle fingers. He was hospitalized. The band saw was guarded at the time of the incident.,1
An employee was operating a band saw to cut hams when the saw partially amputated the employee's left thumb.,0
An employee fell from a concrete catcher basket to rip rap (rock) and suffered a broken nose and contusion to the chest.,1
"An employee was helping to erect a steel building when he slipped and fell approximately 14 feet off a beam and contacted the ground, breaking his right ankle and heel.",1
An employee and a coworker were lifting pieces of a stage and stacking them on a cart when the employee felt sharp pain in his back and collapsed onto his side. He was hospitalized.,1
An employee was removing udders with a knife when the blade severely lacerated his left calf.,1
"An employee was standing underneath a column dumper cleaning up food waste when a cart of diced potatoes fell from the column dumper and struck the employee, causing multiple fractures and a punctured lung.",1
"An employee was walking down a warehouse aisle while a coworker was driving a forklift truck from the opposite direction. They passed each other, but the forklift truck driver remembered that he had a question for the employee. The driver reversed the forklift truck and the employees had a conversation. Once the conversation was over, the employee turned to walk behind the forklift truck. The forklift truck driver forgot he was in reverse and hit the employee, driving over the top of his leg. The employee sustained an open compound fracture to the left leg.",1
An employee was struck by the skid load on a pallet jack being operated by another employee. His leg was pinned and broke 4 inches above the ankle.,1
An employee was in his truck at a loading dock to make a delivery when he stepped into the gap between his truck and the loading dock and fell. He suffered an infection and possible fracture.,1
"Two employees were replacing a 3-inch fire hose on a dock. A nylon rope was tied to one end of the fire hose and to a forklift. The forklift was used to stretch out the fire hose. The nylon rope snapped under tension and struck the injured employee in the mouth, causing a laceration and swelling of the lip.",1
"An employee was struck by a forklift while walking, suffering a broken left wrist.",1
"An employee was changing a J-hook on a trailer while standing on a 14-foot A-frame ladder when the employee slipped and fell from the fourth rung to the ground, suffering broken ribs and vertebrae. The employee was hospitalized.",1
"An employee was offloading a section of structural steel from a trailer when he slipped on ice and the beam landed on his finger. This pinched his fingers between the concrete and the beam, resulting in a right ring finger amputation.",0
"An employee was descending a ladder after cutting down awning. The employee missed a rung and fell approximately 6 feet, rupturing the spleen and requiring surgery.",1
"An employee was moving a 2-inch joint of pipe when the pipe struck the lid of a toolbox. The employee tried to catch the lid when it was closing, but it struck his left ring finger, resulting in an amputation before the first joint.",1
"An employee was moving a pallet so it could be loaded by a forklift. The employee was utilizing a strap attached to the pallet when the strap broke, causing the employee to fall backwards into the forks of a fork truck. The employee suffered three fractured ribs on the right side, a bruised spleen and liver, and a laceration to the left ear, requiring hospitalization.",1
An employee was operating a boom truck. He went to retrieve the outriggers from the driver's side and was caught in between the outrigger and the building wall. The employee suffered a fractured hip and internal bleeding.,1
"An employee was standing at the cash register desk when a third-party vehicle came through the wall and hit him. He suffered a fractured pelvis, cracked ribs, and possible broken femur, requiring hospitalization.",1
"An employee was working on a car in the oil change area when wind caused the car door to move and strike the employee's face. The employee's prescription glasses then broke, and broken glass cut the employee's left eye, requiring hospitalization.",1
"An employee's right index finger was caught in a link of a conveyor belt, amputating his fingertip.",0
An employee was cutting a fallen tree with a chainsaw when the chainsaw slipped and cut his left leg below the knee. He was hospitalized and had surgery.,1
"An employee was attempting to cut a plastic container with a knife when it slipped and cut his left thumb, injuring his extensor tendon.",1
"Two employees were loading large rolls of material onto a trailer. One employee was using a forklift. He unloaded one roll of material and it rolled across the bed of the trailer and fell off the other side, bouncing into the other employee's leg and fracturing his right fibula.",1
"On 4/10/18, an employee was operating a manual fillet chopper when it partially amputated her fingertip. The chopper was guarded at the time.",0
"An employee was stacking/moving steel beams when they became unstable and fell against the employee. The employee was pinned and suffered bruises, scrapes, and soreness.",1
"An employee fell approximately 20 feet from a portable ladder while installing gutters, suffering a broken ankle and wrist. The employee was hospitalized.",1
"An employee was walking toward a customer's HVAC unit when he slipped and fell on the garage's wet concrete floor, breaking his hip and requiring hospitalization.",1
"An employee was moving signs to the rear of a truck when he tripped and fell out of the truck onto the ground, fracturing his right elbow.",1
"An employee was operating a web press. He was attempting to wipe up an ink bloat with a shop rag when the rag became caught in the press ink rollers, which then pulled his right hand into the rollers. He suffered lacerations and a broken middle finger, requiring hospitalization.",1
An employee was using a table saw to cut a piece of wood when the blade cut and amputated his thumb tip (no bone loss).,0
An employee was pulling a tire dolly containing tires outside the building when he tripped and fell onto the dolly/ground while in the parking lot. He suffered a broken hip.,1
"While exiting a truck cab, an employee missed the last step and fell to the concrete pavement, suffering a laceration to the back of the head, as well as pain in the neck, back, and hips.",1
An employee was injured when a candy cane in a Poseidon tank came loose and a ratchet strap that was holding the candy cane struck and lacerated his arm.,1
"An employee was walking on the sidewalk when she tripped on an uneven area and fell on her left side, fracturing her left shoulder.",1
"An employee was climbing into a truck when he hit his head on the door frame. He suffered a possible concussion, contusion, and hematoma, requiring hospitalization.",1
"An employee slipped and fell on ice while walking between buildings, suffering multiple ankle fractures.",1
An employee was helping to break up concrete slabs when the employee's right pinky finger was caught and amputated between two pieces of concrete.,1
An employee fell from an 8 foot A-frame ladder while removing a duct system. The employee's head struck the ground floor.,1
"An employee was using an industrial stapler to construct a shipping crate when a 2-inch staple punctured the employee's right leg above the knee, requiring hospitalization.",1
"An employee was installing a new roll of paper in a machine when the paper became jammed. As the employee tried to pull the paper out, the machine's cross-cutter knife amputated two of the employee's fingers. The machine was unguarded and active at the time.",0
"An employee was dumping shredded paper into a horizontal baler when the wire tie mechanism malfunctioned and did not tie a wire around a bale. He was attempting to fix the issue when his left hand was caught and crushed in the wire tie mechanism, requiring hospitalization. The baler was unguarded at the time of the incident.",1
An employee caught a finger on the conveyor belt while picking up a package off the conveyor belt resulting in amputation of the right middle fingertip.,0
"An employee was helping to move some roofing equipment and was walking on the flat roof when he stepped into standing water, slipped, and fell to the same level, breaking his lower left leg.",1
"On April 10, 2018, at approximately 10:40 a.m., an employee was working from a bucket truck, installing a cable to a new utility pole, when his left shoulder made contact with a primary power line. His clothing then ignited, resulting in third degree burns to his left shoulder, neck, and face. He was hospitalized.",1
"An employee was using a hand cart to take empty containers into the store. While he was wheeling the cart up the ramp, one of the cart's wheels fell off of the ramp. He then fell to a concrete driveway below, fracturing his right tibia and requiring surgery.",1
"An employee was cleaning up wood scraps from a table saw when his glove was caught in the blade, resulting in a left index finger amputation.",0
An employee suffered a finger amputation while using a band saw to cut meat.,0
"An employee was feeding coil into a coil line machine. While readjusting the coil, the employee's gloved right hand was caught in the rollers. A strip of skin was removed from the employee's right index finger. The coil machine was unguarded at the time of the incident.",1
"An employee was unjamming a graphic packer when the employee's right pinky finger was caught and de-gloved between the machine's belt and pulley, requiring an amputation at the knuckle.",0
"An employee was operating a drill machine when her hand became stuck in it, suffering a laceration.",1
An employee was using a chain saw when it cut the tendons in his left arm.,1
An employee was investigating a malfunctioning conveyor belt when his left index finger became stuck and crushed between the belt and the drive pulley.,1
"An employee had cleaned drill pipe threads with rags containing chemical cleaner and then threw the rags into the back of a work truck. Exhaust from a generator inside the truck ignited the rags. The employee grabbed the rags and his coveralls caught fire. He received burns to his hands, stomach, thighs, and lower legs.",1
"An employee was accessing a utility pole, slipped and fell onto a fallen tree resulting in a cracked rib and collapsed lung.",1
An employee was putting vegetation into a hopper when two of his left-hand fingers were amputated by the hopper blade roller.,0
"An employee was on a scaffold finishing a ceiling with plaster when a pin came out of the scaffold, causing it to move. The employee lost balance and fell 6 feet to ground level, breaking the right ankle.",1
An employee was clearing a jam on an automated press when another employee activated the press while the injured employee was still in the die. The press die then caught and partially amputated the employee's right index and middle fingers.,0
An employee was operating a horizontal die press to cut out foam rings. The employee used the manual switch to cycle the press and the employee's right hand was caught between the ram and the cutting blade die. The employee suffered a right hand laceration and two fingertip amputations.,1
"An employee was taking a glass of water to a bedridden client when she tripped over the client's baby bounce, fell to the floor, and broke her hip. She was hospitalized.",1
"An employee was attempting to load a derrick board onto a flatbed haul truck with a forklift. His hand was between the forklift fork and derrick board as he tried to remove a rope from the bottom section of the derrick tarp. The derrick board then shifted, catching his right hand and wrist between the derrick board and forklift fork. He suffered fractures to the right wrist and hand.",1
"On April 11, 2018, at 1:13 p.m., an employee was walking on the sidewalk and reading a package label to make sure it was the right address when he tripped on an elevation between two concrete sidewalk panels. He fell on his right side and broke his right hip, requiring hospitalization.",1
An employee was inspecting and rolling material when her hand was caught in the rollers. She suffered a broken arm and was hospitalized.,1
"An employee was unloading freight and unfolding the lift gate deck extension behind a trailer when the employee's left hand became caught in the fold of the lift gate deck extension, resulting in removal of skin on the left ring finger and a laceration to the left middle finger.",0
"An employee was running a power washer when the tip became stopped up. The employee turned the washer off to unclog the tip, but pressure remained in the line. The clogged tip suddenly dislodged, and the residual pressure lacerated the employee's left index finger.",1
"While entering the building, an employee slipped on concrete fines that had been dumped outside the door during floor resurfacing activities. The employee suffered a fractured leg/ankle.",1
"An employee was moving steel drums in a truck when the employee's finger was pinched between drums, resulting in a fingertip amputation.",0
"An employee was operating an excavator to clear trees when a tree shifted in the bucket and broke through the front window of the machine. The tree came in contact with the travel controls, pushing them into the forward position. The machine moved forward farther into the tree, causing it to go through the cab and forcing the employee out the back window of the machine. The employee then attempted to re-enter the machine to shut it down. At this point, the moving machine caused the moving branch of the tree to strike the employee's left hand, smashing and lacerating the ring finger. The employee was hospitalized and had surgery.",1
"An employee was descending an extension ladder when it began to slide. He fell approximately 10 to 12 feet to the ground, breaking his hip. The ladder was not secured at the time of the incident.",1
"An employee was installing steel decking. The deck had not been placed across three supports. When he stepped on the deck, it tipped and he fell about 8.5 feet onto concrete forms, breaking his left ankle.",1
An employee suffered a finger amputation while troubleshooting a packaging machine.,0
An employee was sorting carcasses when one of the carcasses became caught. The employee turned off the chain and was attempting to free the carcass when the guide bar came off and struck the employee across the bridge of the nose and cheekbone. The employee's nose was shattered.,1
An employee was clearing sand from a conveyor belt when his pinky finger was caught and amputated between the belt and pulley. The belt and pulley were unguarded at the time.,1
"An employee placed a casting on a fixture in preparation to start grinding. The employee's glove was caught on the casting flash as the part was being rotated, pulling the employee's fingers into the grinder wheel. The employee suffered fingertip amputations and lacerations.",0
"An employee was walking down the hallway when she tripped and fell, fracturing her right knee.",1
"An employee was part of a three-person team transporting a patient to the operating room when she tripped and fell to floor, landing on her right side. She suffered a non-displaced ring fracture to her pelvis and a hemorrhage.",1
An employee was cutting a barrel with a plasma cutter when a fire started. He was burned on both legs from his knees to his feet.,1
"An employee was picking up safety cones on the interstate and placing them into the back of a pickup truck when he lost his balance and fell beside the truck. The rear wheel of the truck then struck and broke his right ankle, requiring hospitalization.",1
An employee was preparing to position foam to the table of a foam cutter and slipped from a 17 inch high 4x4 inch square tubing barrier used as a step resulting in a fractured ankle.,1
"An employee was patrolling a facility in a golf cart when he came up behind a trash truck. The trash truck began to back up, and the employee swerved to miss the truck. The golf cart tipped over, causing the employee to hit the ground and break his ankle.",1
"An employee stepped backward from automatically swinging doors, lost balance, and fell to the ground. The employee suffered fractures to the left wrist and lower arm, requiring hospitalization.",1
"An employee became overheated while packaging and experienced facial numbness, requiring hospitalization.",1
"An employee was assaulted by a non-worker while walking in the parking lot, suffering facial fractures.",1
"An employee tripped on the leg of a whiteboard, fell, and hit their head on the floor. The employee remained alert but experienced a seizure after a few minutes and lost consciousness, requiring hospitalization.",1
"On April 11, 2018, an employee was removing plywood from a picnic shelter when the employee slipped onto a small fiberglass piece, which broke and sent the employee falling approximately 15 feet to the concrete below. The employee suffered a fractured wrist and ruptured spleen, requiring hospitalization.",1
"An employee was walking in front of a forklift that was moving a concrete slab, holding onto the slab to keep it steady, when the forklift ran over his left foot, ankle, and leg. He suffered broken bones in his foot and ankle.",1
"An employee used a step ladder to get onto a flat trailer and then climbed onto a precast plank. At the same time, a crane was lowering clamps onto a nearby plank to lift it. As the crane lifted the plank off of the truck, the plank came toward the employee. He jumped from the precast plank and trailer to the ground and landed on large rocks. His left leg rolled, breaking his left ankle. He was hospitalized and had surgery.",1
"An employee was standing on planking located on the top buck of a two-end frame, tubular-welded frame scaffold when one of the scaffold planks broke, causing the employee to fall 10 feet to the ground below. The employee suffered a fractured hip and two fractured ribs.",1
An employee was taking a tractor-trailer apart when he fell and hit his head.,1
"An employee was trying to throw out construction debris contained in a wheel barrow. The employee went through an unlatched gate on the third floor of a five floor building while attempting to enter a hoist. The hoist was located on the second floor. The employee fell three stories, suffering a dislocated shoulder, possible leg fractures, and a sprained wrist. The employee was hospitalized.",1
"On April 10, 2018, an employee was washing aluminum shelving with water when he fell 6.4 feet through the work platform structure onto a concrete floor, breaking his right wrist.",1
"An employee was trying to come off a well and was laying a tool string to lay up for another run. His hand was on the wireline when the bottom sheave was raised and pinched his right ring finger, resulting in an amputation.",0
"An employee was taking voltage measurements with a multi-meter while performing preventative maintenance when he contacted live voltage. An arc flash occurred, causing third degree flash burns to his right hand. Personal protective equipment was not worn at the time of the incident.",1
An employee was attempting to clear an SMC sheet jam when the slitter knife amputated the employee's left middle finger.,0
"An employee was adjusting  a vice on a drill press table when the device shifted, causing his left pinky finger to become caught between the key slot and the fixture. A chunk of flesh was removed.",0
"A temporary employee was stacking material when the punching equipment line was stopped by other employees so they could address the recycling baler. The temporary employee went to the area around the shredder and was attempting to pull some material from underneath a conveyor when the employee's left hand was caught between the roller and the belt of the conveyor. The employee suffered a crushed left hand, fractured left thumb, and skin removal from the back of the left hand.",1
"While conducting shut-down operations on the bottom floor of a fluid cracking catalyst, an employee stepped on a U-drain that cantilevered, allowing both feet to contact hot water condensate. The employee suffered severe burns to both feet and was hospitalized.",1
An employee suffered a left middle fingertip amputation while attempting to clear a jam in a pasta forming machine.,0
An employee was putting a shim in the pit furnace when he suffered second and third degree burns to his torso.,1
"An employee was rolling out roof insulation between the purlins when the employee fell to a concrete slab below, suffering head injuries (blunt force trauma) and broken bones.",1
"An employee was operating a press when a piece of metal slipped off of a casting and struck his left leg, breaking it above the ankle.",1
"An employee was opening a sliding door with his right hand when it was caught between the door handle and a safety pole outside the door, amputating a fingertip.",0
An employee was using a knife to cut through the hide of a dead cow for an autopsy when the knife slipped and struck/lacerated the employee's left lower calf muscle. The employee was hospitalized.,1
An employee twisted his back while maneuvering a wheel barrow full of concrete through a building that is under construction.,1
"After cleaning dust off of shelves and straightening up the area, an employee was descending a ladder when she missed the bottom step and fell to the floor, fracturing her right hip.",1
An employee was removing scrap material from a machine when the employee's right index fingertip was caught and amputated in the machine. The machine was guarded and energized at the time of the incident.,0
An employee was directing concrete operations when he became dehydrated and was hospitalized.,1
"An employee was repairing a photo sensor on a pallet wrapper. As he was lowering the top plate onto the machine, the plate dropped onto one of his fingers, amputating the fingertip.",1
"An employee tripped and fell while descending stairs, injuring the left arm.",1
An employee was removing posts for a fence when the employee's right foot was crushed between the frame and body of a skid steer.,1
"An employee was cleaning under and around the discharge conveyor of a flexographic printer when the employee's right hand came into contact with the drive chain and pulley, partially amputating the index finger and lacerating the middle and ring fingers.",0
"An employee slipped and fell to the ground while climbing a ladder, fracturing most of the bones in his face and suffering a concussion. He was hospitalized.",1
An employee was hanging a sign on a swinging door while on a motorized cart when a forklift operator reversed through the swinging doors and pinned the employee's foot and ankle between the swinging door and the motorized cart. The employee suffered fractures to the right leg and ankle.,1
An employee was disassembling a butterfly valve and using a ball-peen hammer to remove the seal insert when the hammer struck and amputated the employee's left pinky fingertip.,0
"An employee was returning from a business trip and was at the airport. She was going down on the escalator when she lost balance and fell backwards, fracturing her wrist and neck vertebrae. She was hospitalized.",1
"An employee was operating a reach forklift and was traveling down an aisle when he lost control of the lift and turned into a racking upright, crushing his left ankle.",1
"An employee was planning to walk into the slab area to inspect some plumbing work prior to a concrete slab pour when he stepped up on the perimeter slab formboard with his right foot and then stepped in a bleeder ditch (located outside the slab area) with his left foot. His right ankle then got in a bind and broke, causing him to fall to the ground outside of the slab area.",1
"An employee was performing routine maintenance on a process vessel. While the employee was lowering the vessel head plate into position over the vessel, a member of the lifting mechanism unexpectedly shifted, causing the employee's right ring finger to become pinched between the mechanism and the head plate. The employee's finger was partially amputated.",0
An employee was walking under an amusement park ride track to diagnose a fault error when the ride's cart bogie (wheel) struck the employee. The employee suffered right shoulder and right ribcage injuries.,1
"An employee was putting straps on steel beams by hand. The smaller beams were being moved by two employees using a long reach arm excavator. A larger steel I-beam flipped and rolled off the block it was on and pinned the employee's ankle to the ground, fracturing it.",1
"An employee was ascending or descending stairs when she tripped and landed on her right hip, suffering right hip pain.",1
"An employee was checking a power swivel's back-up securing line to see if it was tight enough. As he reached out to slap the line, residual stored energy released, causing the securing line to back spin. The line was attached to a turnbuckle with a safety pin in place. The safety pin spun backwards, catching and lacerating the employee's right inner elbow area and causing potential muscle damage.",1
"An employee was installing a metal roof on a non-residential building when he fell approximately 16 feet to the ground below, breaking both wrists. He was hospitalized.",1
"An employee was cleaning out a temperature port when heated carbon powder came out and sprayed his face, neck area, and right forearm. He suffered first degree burns to his chin and neck area and second degree burns to his right forearm, requiring hospitalization. Personal protective equipment was not worn at the time of the incident.",1
"An employee loaded a reel of cable onto the payoff machine area. The employee was rocking the reel into place when the reel went too far forward, catching the employee's left ring and pinky fingers between the side of the metal reel and the vertical support structure of the machine's control panel. The employee's pinky fingertip had to be amputated.",0
"An employee was using a circular saw when it kicked back and grabbed his glove, resulting in a severe laceration into the bone.",0
"An employee fell 12 feet to the ground while performing electrical work, suffering a punctured lung, broken rib, and back fractures.",1
"While installing a sewer line using the horizontal directional drilling method, an employee was helping to add a drill stem to the tail string when his hand got too close to the nylon sling and the drill pipe and was crushed between the two. His right hand was amputated.",0
"An employee was installing glass on ground level when wind blew a door from its hinges on the second floor. The door struck the employee, who suffered broken neck vertebrae.",1
"An employee was descending on an angled concrete embankment when his right foot slipped downward and shifted his body weight to his left foot. This caused his left ankle to rotate laterally, fracturing it.",1
"An employee lost balance while closing a gate and fell to the ground, suffering a broken hip.",1
"An employee tripped on grass and fell while walking into the building, fracturing the right ankle and requiring hospitalization.",1
"An employee was attempting to thread a drawblock on a dry drawing machine by placing a come-a-long chain on the drawblock head when the machine malfunctioned, causing the drawblock to suddenly turn. The chain then tightened and pinched the employee's right ring finger, causing an open fracture and amputating the fingertip.",1
An employee was installing an electric cable below street level when his foot was caught and lacerated between two metal plates.,1
"An employee had run a water hose through a doorway and was trying to keep the metal door open when high winds blew the door shut on his left hand, partially amputating his index and middle fingers.",0
An employee was loading a bus from the rear when the bus rolled over its chocks and pinned the employee against a truck. The employee suffered a contusion to the chest area and fractured ribs.,1
"An employee was setting up a machine when he smashed his thumb, resulting in a left thumb amputation.",0
"An employee was performing touch-up painting on a commercial truck when he fell off a ladder, suffering broken ribs and lung injuries.",1
"An employee was helping to spot trailers when a forklift operator ran over his right foot, breaking it.",1
"An employee was working in the back of his delivery vehicle (a tractor trailer) pulling a pallet of food products onto the lift gate of his trailer. As he pulled the pallet to the liftgate, he fell approximately 4 feet from the lift gate to the blacktop street below.",1
"An employee was using a chainsaw to cut a cant when the saw slipped from his hand and cut the inside of his left foot behind the steel plate of his safety shoe. He suffered a deep laceration to his left foot, requiring hospitalization and surgery.",1
"An employee was setting up a hydraulic press brake when his fingers were pinched in the die, amputating four fingers on the left hand and one finger on the right hand.",0
"An employee was patrolling and securing the area to make sure the doors were locked. On the way back to his vehicle, he tripped over a concrete parking block. As he tried to break his fall, he fractured his left wrist.",1
"An employee fell 2 feet while climbing a wooden shelf, breaking his hip.",1
"An employee was standing near a combo machine waiting to relieve someone on the casing puller when he attempted to move casing that was stuck in the combo machine. The rollers grabbed his gloved hand and pulled it into the rubber-clad rollers. His right pinky, ring, and middle fingers were crushed.",1
"An employee was skimming a trough of molten aluminum when it spilled into his boot, causing third and fourth degree burns.",1
"A maintenance employee was working on a banding machine when he slipped/lost his footing and his left leg/calf hit a piece of steel pipe, suffering a laceration.",1
"An employee was cutting down a tree limb when it struck the employee's right arm, crushing it against the tree.",1
An employee was loading potatoes onto a conveyor belt when the employee's sleeve became caught on the conveyor. The conveyor then crushed the employee's left hand/forearm.,1
"An employee was getting the turf roller off a trailer when the roller ran over his left leg, fracturing it and requiring surgery.",1
"An employee was standing on a pipe one foot off the ground when the employee fell, breaking the right arm.",1
"An employee was attempting to clamp a saw's ancillary vice to advance a piece of stock on the saw when he activated the main vice. The main vice then clamped down onto his left ring and pinky fingers, amputating his ring fingertip.",0
"An employee was prepping for the day when a contractor dropped a CO2 cartridge in a deli fryer and it exploded. The employee received grease burns on the face, arms, chest, and hands.",1
An employee was descending a ladder when the ladder shifted and the employee fell 10 feet resulting in a fractured left foot and elbow.,1
"On April 13, 2018, an employee was hooking a lavatory dump cart up to a tugger when the employee's right index finger was pinched in the hitch, resulting in an amputation of the fingertip.",0
"Two employees were replacing a water pump on a flatbed truck. The water pump had been raised underneath the truck with a jack. The injured employee had just finished removing the bolts that attached the old water pump to the rest of the vehicle, and was attempting to lower the pump to the ground with a floor jack. The second employee attempted to release pressure off of the hydraulic floor jack in order to lower the old part to the ground while the injured employee was attempting to hold the part steady on the jack while it was lowered. The jack lowered faster than expected and the injured employee lost his grip on the part, which rolled off of the jack and onto his abdomen. He suffered blunt force trauma to his abdomen and a torn intestine.",1
"Employees were using a pallet jack stand to move several pallets of stacked ceramic tile weighing approximately 2,200 lbs. from one end of the floor to the opposite end when the tile hit a hole and the bundles of tiles began to wobble. The injured employee was standing on the side of the tile bundles and was attempting to balance them when they eventually tipped over and fell on him. He was pinned beneath the floor tile and a wall, sustaining a displaced open wound fracture to his left foot and ankle that required surgery. He also sustained minor injuries to both of his legs and scrapes, cuts, and bruises on other parts of his body, including a laceration to his head.",1
"An employee was fixing the gate to a silo at a concrete batch plant when the gate fell and caught his right thumb, resulting in an amputation.",0
"On 4/02/2018, employees were replacing a pin in the chain for a slat conveyor. The sledge hammer used to pound the pin into the chain missed the pin and struck the left pinky finger of the employee who was holding the pin. The employee's fingertip had to be later amputated.",0
An employee was operating a press to separate two pieces of metal when the press turned and lacerated the employee's left index finger above the second knuckle.,1
"An employee moved a bundle of sheetrock in order to look behind it but it fell on his leg, requiring hospitalization and surgery.",1
"An employee was operating an electric pallet jack to stage a stack of pallets when he lost control of the jack's throttle and crashed into a racking support. His foot was caught between the pallet jack and the racking support, causing a deep contusion that required hospitalization.",1
An employee was offsite at a customer location stocking merchandise and began having chest pains. He was hospitalized.,1
An employee was on a standup forklift when he became stuck in a hole. Another employee on a forklift was attempting to get him out when the forks of the second forklift struck and injured the employee's right heel.,1
"An employee was installing a top bearing onto a fan inboard shaft when his left ring fingertip was caught in a pinch point between the inner radius of the bearing and the thrust ring, resulting in a fingertip amputation.",0
An employee was finishing up on an interior wall from a baker scaffold when the scaffold fell over. The employee fell over 10 feet and suffered a head injury.,1
An employee tripped and fell over a broken sidewalk and broke her ankle.,1
An employee was driving a fertilizer tender truck and moving over to accommodate traffic when the truck rolled over. The employee suffered lower arm avulsions.,1
"An employee was operating a band saw to cut a pork bone when he attempted to catch the meat and his left pointer and middle fingers were caught by the blade, resulting in the amputation of both fingertips.",0
"An employee was attempting to clean debris out of rotary valve piping when the employee's left index finger contacted the rotary valve, amputating the fingertip.",0
An employee was walking down the hall when she stumbled and fell hitting her head on the wall before landing on the floor. She fractured her C2 vertebra.,1
"An employee had been cutting through a section of a conveyor that was being removed. He was using a reciprocating saw, handheld grinder, and ladder. He removed one foot from the ladder and placed it on a metal stationary ladder that was inches away. He had one foot on each ladder when the metal ladder shifted, causing him to fall. His left wrist was fractured in two places and he sprained his back.",1
"On April 14, 2018, an employee was attempting to remove bead tape from a spiral wrap machine when he stepped on the foot pedal and engaged the machine. The roller began to move and pulled his left middle finger into the nip point between the roller and machine frame, amputating his fingertip.",0
"An employee bent down to retrieve his keys, which had fallen on the ground in the loading dock area. As he grabbed them, he lost his balance and used the dock's railing to support himself. The railing then collapsed and he fell about 5 feet to the concrete floor, suffering two broken ribs and a fractured pelvis. He was hospitalized.",1
"An employee was holding a 55-gallon drum in place with his right leg while another employee was attempting to puncture the drum with the forks of a forklift. As the forklift operator applied pressure to the drum with the forks, the injured employee's foot became pinned to the ground under the drum, resulting in a fracture to his right leg. He was hospitalized and had surgery.",1
"On April 14, 2018, at approximately 9:50 PM, an employee was straightening a pallet on an overhead conveyor when the employee fell 30 feet to the next lower level. The employee suffered a broken pelvis and torn arm tendons.",1
"An employee was working the wood chipping machine and was attempting to remove the cable hook from the tree when his left hand was caught between the tree and the cable, which tightened up on his hand and severed his left middle fingertip.",1
"While opening and closing valves on stage two of an acid transport, an employee lost footing on the second step and slid down, landing hard on the ground and breaking the left leg.",1
"An employee was steaming out a line when a candy cane propelled out of the tank, striking the employee in the head and hands. The employee suffered a facial cut, facial burns, and a broken hand.",1
"An employee was walking from the guard house to a parked car to sign in a guest when he fell to the ground, hitting his face on the concrete. He fractured his eye socket and suffered minor cuts to his head and face. He was hospitalized.",1
"A crew was attempting to lift a balloon wall when wind caught it, causing the wall to fall back on the crew. One employee was hospitalized.",1
An employee was cleaning and maintaining switch gears when an arc flash occurred resulting in burns to the employee's right arm.,1
"The floor of an exam room had been freshly mopped and a ""Wet Floor"" warning sign had been put out. An employee came into the exam room and slipped and fell on the sign, breaking ribs on his left side. He was hospitalized.",1
"An employee was attempting to lower forks on a forklift when a fork released and fell on the injured employee's foot, crushing the pinky toe and resulting in a partial amputation.",1
An employee was standing on a piece of equipment to assist in a maintenance task when a second employee inadvertently started the equipment. The injured employees' left foot then became caught and fractured in a rotating piece of machinery. The equipment was unguarded at the time.,1
"An employee was using a cart to push a turbine diaphragm out of a temporary sandblasting tent when the wheels encountered sandblasting grit on the floor, which stopped the progress of the cart. When the cart stopped, the weight shifted, causing it to tip over and the diaphragm to fall on the employee’s right leg, breaking it.",1
"An employee was loading clips into a robotic welder when a clip fell into or near the machine. As he attempted to retrieve the clip, a moving part struck and broke his hand.",1
An employee was operating a lift carrying cleaning supplies in the warehouse. The employee reached back to keep a mop handle from falling and struck the racking support. The employee sustained a right leg laceration and femur fractures. The left patella was also fractured.,1
An employee was lifting a heavy chiller in order to clean the area when the end plate (approximately 300 pounds) fell on his finger while trying to move it. His right middle finger was partially amputated (3/4 inch to the base of the nail).,0
"An employee was profiling door skins on a table saw when his right-hand middle finger and palm made contact with the saw's blade. His middle fingertip was amputated, and his palm was lacerated.",0
"An employee experienced a hernia while lifting something, requiring hospitalization.",1
"An employee was turning a pallet jack around a corner when he met another worker with a pallet jack.  His foot became caught between the two pallet jacks while attempting to negotiate his pallet jack around the other, breaking a bone and requiring hospitalization.",1
"An employee was walking by a glass panel when his hand struck the panel and was severely lacerated, requiring surgery. Cut-resistant gloves were not worn at the time.",1
"An employee was skiing from the top of a mountain lift station to the bottom when she hit a tree, suffering four broken ribs, a lacerated liver, a bruised kidney, facial lacerations (one required stitches), and a black eye. She was hospitalized.",1
"An employee received an electrical shock when operating a palletizer, requiring hospitalization.",1
"An employee was at a client's automotive shop helping them remove a car frame when his left middle finger was pinched between the car's frame and chassis, resulting in a finger amputation from the nail.",0
"An employee was walking across the parking lot when his left leg snapped/broke, causing him to fall to the ground.",1
"An employee was painting from a mobile scaffold that was 6 feet by 3 feet and three frames high. The scaffold had railings on three sides and no railings at the wall side. The employee was cleaning his painting trail when other employees moved the scaffold about 2 to 3 feet from the wall. At that point, the employee lost his balance and fell about 16 feet to the concrete floor, fracturing both ankles. He was hospitalized and had surgery.",1
"On April 16, 2018, an employee was helping another employee install a pin in an auger coupling. As employee #2 struck the pin with a hammer, a small piece of metal flew into employee #1's eye. The employee was hospitalized. Both employees were wearing PPE.",1
"An employee was getting off the roof of a single story house using a ladder. While getting on the ladder from the roof, he stepped on the first course tile adjacent to the ladder and it broke, causing him to lose his balance and fall about 10 feet to the driveway. He fractured his left femur, requiring hospitalization and surgery.",1
"An employee was removing plywood from a roof when he fell approximately 12 feet to the ground, breaking his arm and dislocating a vertebral disc. He was hospitalized.",1
"On April 16, 2018, at 2:20 PM, an employee was inspecting a pipe when another pipe rolled into the pipe he was inspecting, crushing his left index finger and resulting in an amputation at the first joint.",0
"An employee was moving a pallet of material with a non-mechanized pallet lift. The employee lost their balance and grabbed onto the lift, tipping it over and causing the lift to strike the employee's foot. The employee sustained a foot fracture requiring hospitalization.",1
"An employee was unstrapping piping from a truck trailer when two bundles of four pipes came loose and struck the employee, dropping him to the ground. He suffered a bruised head, head injury, internal injuries, bruised spleen, broken left shoulder, and broken vertebrae.",1
An employee was cleaning and sanitizing a machine when the employee's fingers were caught between the wall of the shaft and the blade as the machine cycled. Several fingers on the employee's right hand were amputated. The machine was not locked out at the time.,1
An employee was climbing a ladder with a sharp bladed tool when it impaled his right knee as he raised his leg to climb.,1
An employee was checking paperwork when a forklift inadvertently hit a hand cart that then hit the employee. The employee fell to the ground and fractured a leg.,1
"An employee was feeding a band into a strapping machine when the machine reactivated and caught his left hand, crushing and lacerating it. The machine was unguarded at the time.",1
"An employee was servicing a grease trap at a restaurant. The employee had two trap lids open with a hose running into one of the trap holes. The employee tripped and fell into the open trap hole, fracturing the left femur.",1
"On April 16, 2018. an employee tripped on a door threshold and fell to the floor, requiring hospitalization for a fractured hip.",1
"An employee was walking down a ramp when he slipped on ice, fracturing his left fibula. He was hospitalized.",1
"An employee was removing trash on the first floor near a wall opening when the employee slipped and fell off the building to the ground, suffering multiple internal injuries.",1
"An employee was using a crane to lift a 10,000 lbs. part and got his left ring finger caught between the lifting strap and the part as it was raised resulting in amputation of the fingertip.",0
"An employee was using needle nose pliers to remove a rifle cartridge from an adhesive pot filled with hot glue when the heat from the glue ignited the propellant powder in the rifle cartridge and caused it to burst open. Hot glue then splashed onto the employee's left arm and left hand, causing burns that required hospitalization.",1
"Two employees were trying to loosen a bolt to disassemble a coupler between an engine and compressor. One employee was on the engine side while the other (the injured employee) was on the compressor side holding a shim. When the employee on the engine side turned the bolt for the coupling assembly, the engine crank rolled and amputated the injured employee's left middle fingertip.",0
"An employee was reversing a truck into a parking space. He had opened the door to get a better view when he accelerated instead of pushing the brake. The truck went over the curb and he was thrown on the ground against the cement boards (parking stops), breaking a rib and two vertebrae. He was hospitalized.",1
"An employee slipped on ice and fell while walking from the main building to another building, fracturing an elbow, knee, and ankle.",1
Two employees were unloading a box from the back of a truck. One employee was spotting and the other was on the forklift. The box became unstable and fell off the forklift striking the spotter as it fell. The box hit him in the hip area and pinned him underneath. He was hospitalized with fractured vertebrae.,1
"An employee was standing in the top dog house of a drilling rig when a 3/8"" plug shot out of a jar tool and struck him, injuring his left bicep. He was hospitalized.",1
An employee was providing peritoneal fluid to the son of a patient when the son assaulted the employee. The employee suffered a punctured lung.,1
"While in the process of sandblasting, an employee lost control of the hose and sandblasted his leg. He was hospitalized with severe abrasions and raspberry burns to his leg.",1
An employee fell down a flight of stairs and suffered a seizure after the fall. She suffered fractures to her nasal bones and part of her jaw.,1
An employee was operating a forklift when it crushed his left foot.,1
"An employee was placing cardboard on a cardboard baler when the pin that secures the press-down plate on the baler broke, allowing the plate to land on and break the employee's left arm.",1
"An employee was walking across a warehouse roof when he fell through a deteriorated section and broke his leg, requiring hospitalization.",1
An employee was cleaning a roller on a press machine when the employee's right index finger was caught and smashed between two rollers.,1
"An employee was climbing a portable ladder with sandblasting gear on when he tripped and fell to the floor, suffering fractures.",1
"An employee was standing on the ground using an overhead crane to move small light beams from a conveyor to a 
staging area when the stack of beams became unstable and started to fall over. As he attempted to get out of the way of the falling beams, he fell to the ground, dislocating/fracturing his left elbow. He was hospitalized and had surgery.",1
"An employee received left index, middle, and ring finger amputations above the middle knuckle when his hand was crushed between a dock plate and the forklift frame. The forklift had fallen between the dock plate and the trailer when the truck pulled away from the dock.",1
"An employee was walking across the parking lot when he tripped and fell to the ground, breaking four ribs. He was hospitalized.",1
"After a tree had been felled, a dead limb fell out of an adjacent tree and struck an employee in the back of the neck and back. He was hospitalized with a fractured neck and back.",1
"An employee was climbing a ladder when the employee's feet slipped. The employee then fell approximately 5 feet from the ladder, fracturing the right ankle.",1
An employee was clearing a polymer jam buildup in a hydraulic chopping machine when the hydraulic blade cycled and caught the employee's finger between the blade and the bottom metal block. The employee's right index finger was amputated at the second joint.,0
"An employee was stocking shelves when a shelf shifted, fell, and struck the employee's left pinky finger, resulting in a partial amputation.",0
An employee was performing a stream test and opening the ladle stopper mechanism when molten metal splashed on his leg and burned through his protective leggings. He suffered a small burn on his calf and upper ankle.,1
"An employee was attempting to move his car when he slipped on ice in the parking lot and broke his ankle, requiring surgery.",1
"A crane was used to tilt a steel cradle, which was attached on either side with slings. The slings were attached to clamps and the clamps were attached to the cradle. As the cradle was tilted, one of the clamps came loose and swung in the air, striking the back of an employee's head. He sustained a head laceration, requiring hospitalization and stitches. A hard hat was not worn at the time.",1
"An employee slipped on black ice while walking between two parked trailers during a trailer inspection, suffering a hip fracture.",1
"An employee was descending the aft port ladder of a derrick to remove a rope from the barge kevel when he slipped and grabbed the winch cable with his right hand. The cable was moving and his right hand was pulled into the snatch block, causing a laceration and amputation of two fingers.",1
"An employee was unloading metal rails from a transport trailer when the rails slid off the trailer supports and struck the employee in the back and lower leg. The employee suffered damaged vertebrae and a lower leg injury, requiring hospitalization and surgery.",1
"An employee was installing new metal commercial shelving units when the shelving collapsed and landed on the employee's left pinky finger, amputating it above the first knuckle.",0
"An employee was climbing a portable ladder being held by another employee when he slipped and fell 8 feet inside the vessel, injuring his right heel.",1
"An employee was moving a furnace basket with a hoist when the basket fell off the lifting device and onto the employee's finger, resulting in a partial amputation.",1
"An employee was descending a ladder to move from one roof level to another when the bottom of the ladder slipped out, causing him to fall from about the halfway point of the ladder to the lower roof level. He landed on his back and ruptured a disk.",1
An employee was using a cutting torch to cut a scrap vehicle's brake line when the brake fluid shot out and burned his right eye.,1
"An employee was preparing to take a sample from a tanker truck when a reaction occurred, causing the vapor inside the tank to combust. He received second and third degree burns to his hands, arms, and the top of his head.",1
"At approximately 22:50 hrs. on April 17, 2018, an employee was changing a reel on a machine when the die actuated and came down on his left hand, resulting in a partial amputation to the first knuckle of his index finger.",1
An employee was using a table saw when he sustained a left middle finger amputation.,1
An employee was using a circular saw to cut a piece of wood when the saw cut and amputated his left index fingertip.,0
"An employee was receiving hands-on powered pallet jack training and was attempting to turn the pallet jack when the employee struck a storage rack, fracturing the left ankle and leg.",1
"An employee was helping another employee move a RRU from the top of a wooden tower pole to the bottom. Another employee was holding onto a piece of conduit when a gust of wind picked up the conduit. The conduit came down, striking and possibly fracturing the injured employee's right hip.",1
"An employee was aligning lumber on a conveyor as it exited an oven when his glove was caught in the belt, resulting in a partial left ring fingertip amputation.",0
"An employee was working from an electric distribution wood pole to remove an electric conductor when the pole broke and fell to the ground. He was utilizing fall protection and the pole was rotten from the inside out. He fell approximately 40 feet suffering broken ribs, a broken left wrist, and a lacerated liver that required hospitalization.",1
"An employee was removing bottles from inside a blow mold flamer machine when her right middle fingertip was cut by a chain and sprocket, resulting in an amputation.",0
An employee was using a hydraulic press on a hub when something slipped and struck his left thumb.,1
"An employee was standing on a load on top of a truck using a chain to tie down precast concrete beams when he passed out and fell 10 feet off of the truck onto gravel-covered ground, suffering fractured vertebrae.",1
"An employee had just started going down a ladder (+/- 4 rungs) when one of her feet slipped off a rung, causing her to lose her balance. She attempted to catch herself, but was not able to stop her momentum backwards. She hit the concrete floor below, suffering traumatic damage to multiple body parts, including but not limited to her head, neck and shoulder.",1
"An employee was feeding foil inner lid seals into the shuttle stacker on a pint filler machine when some of the seals fell onto the conveyor. The employee attempted to grab a stack of the seals from the conveyor. Her right hand was then caught and pulled into the machine, making contact with the heat seals. She sustained third degree burns on her right palm and forearm and multiple lacerations to her hand and arm, requiring hospitalization. The machine was running at the time of the incident.",1
An employee slipped and fell on a tile floor while walking. The employee was hospitalized with a fractured femur.,1
"An employee was removing a dead fish from a fish tank when the fish's spines stuck the employee's finger, resulting in an infection to the finger and arm.",1
"An employee was removing debris from the job site and was on a digger derrick dumpster truck when he fell off the truck edge to the ground, fracturing his patella and lacerating his forehead.",1
"An employee was operating a roller to roll the asphalt near a handicap post and sign. He pressed the vibration button while moving at around 1 to 2 miles an hour. The roller then drifted to the right, closer to the sign. As he neared the post, his hand was sliced by the sign.",1
"An employee fell to the floor while standing in the break room, suffering a broken hip.",1
"At around 3:30 PM, an employee was using a tool to pry open a manhole to clear the main drain line when the tool slipped while his thumb was in the manhole. The manhole lid then came down on his left thumb and severed it above the knuckle.",1
"An employee was walking across a room on carpet when she tripped over her own feet and fell, fracturing her hand and bruising her face and knees.",1
"An employee was loading a racking system when it collapsed on top of the employee. The employee was hospitalized with a broken pelvis, femur, and ribs.",1
"An employee was using an electric pallet jack to move pallets of product through a warehouse. He was attempting to reposition the jack when he backed against the racking behind him. His arm was pinched between the rack and the pallet jack, resulting in a pinched nerve.",1
"An employee manually moved material on a conveyor without the knowledge of the injured employee. The injured employee's hand was then pinched between two bundles of material on the conveyor, resulting in a right ring fingertip amputation.",0
"On April 18, 2018, an employee was helping to clean out heat exchangers when a metal rod attached to a cordless drill used to clean salt deposits slipped and fractured/lacerated the employee's right thumb.",1
"An employee tripped over an object while providing in-home care to a patient, breaking a leg.",1
An employee was using polishing paper to polish the rotating shaft on a lathe machine when her right-hand fingers were pinched by the polishing paper and her wrist was pulled down into the rotating shaft. Her right wrist was fractured and three digits were de-gloved.,1
"On April 18, 2018, an employee was standing on a bale of hay while restacking straw in a barn when the straw bales moved, causing him to lose his balance and fall. He hit a railing as he fell and landed on the other side, breaking ribs and requiring surgery.",1
"On 4/18/2018, at 8:00 PM, a pallet of juice, which was being moved by an electric pallet jack, struck the corner of a packing table, causing it to pin an employee between the table and the discharge conveyor. The injured employee suffered contusions to her abdomen and back, requiring hospitalization.",1
"An employee was setting up the conference room when a table tipped on his toe, causing trauma that required surgery.",1
"An employee was walking backwards while operating a concrete burnisher when he tripped over a protruding pipe and fell. The burnisher handle then hit his abdomen, perforating his bowel and requiring hospitalization.",1
"An employee was ground-guiding a loader that was moving a suspended concrete block. The loader went down an incline and the concrete block swayed. As the operator lowered the block, it came loose and struck the employee's foot, breaking it.",1
An officer was participating in training when a flash-bang grenade exploded in or around his hand lacerating it.,1
"An employee was operating a drill when he lost control of it and it fell onto his arm, deeply lacerating an artery. He was hospitalized and had surgery.",1
"An employee was stacking pallets and lifting one overhead when it fell back and landed on the employee's head, causing a laceration.",1
An employee had just topped a white pine tree and was using his climbing line to descend the tree when he lost his footing and fell approximately 40 feet to the ground. He was hospitalized with broken ribs and a broken wrist.,1
"On April 18, 2018, an employee was attempting to clear a jam on a machine when a second employee accidentally engaged it, causing the machine to lower on and crush the first employee's left lower arm.",1
"An employee was cutting short ribs with a band saw. While pulling the meat through the saw with his left hand, his right index finger contacted the blade causing a partial amputation to the side of the finger.",0
"An employee was attempting to take a part out of a punch press machine's point of operation when the machine actuated, crushing her right index finger and resulting in an amputation.",0
"An employee was drinking coffee when she inadvertently dropped her coffee mug, which struck a chair and then impacted the floor mat. The cup handle broke and struck the employee's foot, causing a puncture wound and bleeding that required hospitalization and surgery.",1
An employee was trying to open the rear door of his hostling tractor when he lost his footing and slipped off the tractor. He hit his head and left shoulder.,1
"While performing maintenance activities, an employee experienced back pain that required hospitalization.",1
"An employee was undergoing SWAT paramedic training. He was on the monkey bars when he swung his feet up, slipped and fell about 7 feet off of the monkey bars, and landed on his head. He fractured his D6 and D7 vertebrae, requiring surgery.",1
"An employee was helping a press brake operator bend a part when his right hand became caught between the metal part and tooling, lacerating and fracturing it.",1
An employee was dropping books into a binding machine and pinched the tip of her right middle finger in the clamp resulting in fingertip amputation.,0
"An employee was inspecting a leaking roof when he fell approximately 39 inches to a lower roof, fracturing his left wrist and requiring hospitalization.",1
"An employee was manually closing the passenger door of an aircraft because the door's hydraulics were broken when his right pinky finger was caught between the door and the body of the aircraft, amputating his fingertip.",0
An employee was feeding blocks on the finger jointer and got her left pinky finger caught between the lug and the feeder plate amputating it at the first digit.,0
An employee was pounding a header onto a metal tank and struck his hand with a sledgehammer resulting in amputation of the left ring fingertip.,0
An employee was setting up the excavation with lamp light and fell into the excavation after his glasses fogged up. The employee sustained a fractured rib.,1
An employee was helping to open a door and got her left index finger stuck in the door latch. She pulled her finger away and amputated the fingertip.,0
An employee was cutting a piece of plywood with a portable saw when the tool lacerated his right thumb.,1
Employees were using a forklift to raise a conveyor. The straps attached to the forklift forks slid off and the conveyor fell onto the employee's left foot fracturing the tibia and fibula.,1
"While working with a crane, an employee was hit by a 1.5-ton magnet, suffering a broken pelvis and L5 vertebra fracture.",1
"An employee was sandblasting when the hose became disconnected. As he attempted to fix the hose, his right arm was sandblasted. The sandblaster was running at the time.",1
"An employee was helping to load a container with logs. The logs are picked up with a knuckle boom loader and placed onto racks for temporary storage. The racks are then pushed into 40-foot containers with a front-end loader. Jockey trucks are used to position the containers at/in the loading area. The injured employee was standing in the loading area helping to load a container with logs when a 19-foot log from the knuckle boom loader fell onto the employee resulting in a broken facial bone, a broken femur and a cracked right hip joint.",1
A temporary employee was changing a bay door rope from inside a man cage lifted on a forklift and fell approximately 7-8 ft. to the ground resulting in right arm and ankle injuries.,1
An employee was assisting a co-worker change a forklift battery using a large automated battery changing system. The employee was caught in the middle of the system and suffered broken ribs.,1
"An employee was using a hand-held drill to ream a hole in a sheet metal bracket held in a vice. The injured employee was attempting to remove a wire loop from the hole being drilled when his glove was caught in the bit. The glove pulled the middle finger on his left hand into the bit, causing cartilage and tendon damage that resulted in a finger amputation.",0
"On April 19, 2018, an employee was struck by a reversing forklift while walking in the packing area. The forklift crushed the employee's foot, resulting in an amputation below the knee.",0
An employee reached up to a window sill to retrieve her phone and the window closed on her right pinky finger amputating the fingertip.,0
"An employee was using a crane to lift a 1,200 lb., 36"" x 18"" solid copper block that was chocked with a nylon strap. The strap was not centered. When the employee lifted the block approximately 3"" from the pallet it was sitting on, the block pivoted, fell from the strap, and struck the employee on his right foot. His 1st, 2nd and 3rd metatarsal bones were fractured, requiring hospitalization and surgery.",1
An employee fell and suffered laceration injuries to his head.,1
An employee received a burn to the face when lighting a pilot light on a gas furnace at a residential home with a match.,1
An employee was retrieving a tool that was dropped into the container former machine when the baffle arm on the machine struck the employee's elbow forcing the employee's right hand into the machine where it was trapped under a baffle. The employee's right ring finger was amputated just above the knuckle.,0
"An employee was inserting a hand held wand with a burning cloth attached to the end into a 4"" opening of the main burner valve to ignite the pilot. The flame ignited residual gas and burned the employee.",1
An employee opened the access door of a saw and was showing maintenance an issue with the equipment when the saw lacerated the employee's right-hand index finger and thumb. The saw was running at the time.,1
"An employee was helping to hook up a trailer when the trailer jack failed, allowing the trailer tongue to land on the employee's left foot, causing an amputation.",1
An employee suffered an electrical shock when he touched a metal cart that had become energized by an electric welder that was mounted on it. The employee was hospitalized.,1
"On April 19, 2018, at around 9:00 AM, an employee was standing on the tailgate at the back of his pickup truck trying to get something out when he slipped and fell backwards off the truck to the ground. The employee was admitted to the hospital due to a fractured vertebrae and compressed lower back disc.",1
"An employee was cutting a piece of lumber with a cut-off saw when the piece collapsed and pinched the saw blade, causing the saw to 
kick back. The employee lost control of the saw, and it contacted/lacerated his left bicep.",1
An employee was climbing up an extension ladder and fell about half-way up (6 feet) onto loose conduit on the ground resulting in a broken leg near the ankle and hospitalization for surgery.,1
"An employee was riding on the back of a truck as part of an escort crew for milling equipment on a road construction project. The truck stopped and the employee was ejected, hitting his head on the pavement.",1
An employee lost her footing or balance and fell down the three-step stairway outside the building resulting in a lower left leg fracture that required surgery and hospitalization.,1
"An employee was climbing a stepladder, slipped on the fourth rung and fell approximately four feet to the asphalt ground resulting in a broken right wrist and a bruised right hip.",1
"An employee was descending a 20-foot extension ladder when the employee slipped off the ladder rung and fell at least 6 feet to the ground below, breaking the left leg.",1
An employee was cutting metal in an alligator shear machine when a piece of cast aluminum flew off and jammed his left index finger causing two one-inch lacerations.,1
"An employee was moving an electric buggy to gain access to an electric pallet jack. While operating the buggy in reverse, the employee was pinned between the buggy and a new loader tire resulting in a fractured left tibia and fibula.",1
"Employees were cutting steel pipe into sections. A backhoe bucket was holding pipe about two feet above ground level. Employees had cut pipe on the west side and walked to the east side to cut sections. When the crew arrived on the east side, the backhoe lifted the pipe an additional two feet in preparation to start jarring the pipe to complete the cut on the west side. As the backhoe was lifting the pipe, the pipe on the west side broke completely causing the pipe on the east side to swing north hitting an employee and causing him to fall. The pipe landed on the employee's left knee. The employee was hospitalized with a broken left knee that required surgery.",1
"An employee was using pneumatic nippers to cut line stake material. As he made a cut, the tip of his left hand was caught in the nippers. He suffered a left thumb tip amputation.",0
"An employee was trimming a tree when a part of the tree broke off and hit him, breaking his jaw.",1
"An employee was directing a lull operator. The employee jumped onto the back of the unbalanced lull, slipped and fell striking their face on the lull. The employee sustained a laceration and fracture to the face and a fractured foot.",1
"An employee was standing on decorative rocks (pebbles) when he lost his balance and fell, injuring his back.",1
"An employee experienced fatigue, jaw pain and a rapid heartbeat while hiking.",1
An employee was attempting to unclog a riding lawn mower when the spinning mower blades broke his right index and middle fingers and partially amputated his right middle finger. The mower was running at the time.,0
An employee was operating a forklift and moving toward a truck when wind caught the door to the truck's gate and swung it toward the forklift. The employee was attempting to stop the gate when the employee's right middle and ring fingertips were smashed between the gate and forklift.,1
"An employee was attempting to clear plastic from a machine's ram when it cycled. The employee's right middle finger was then caught between the ram and a mold, amputating the fingertip.",0
"While checking a conveyor, an employee was caught in the moving parts of the conveyor and suffered compound fractures and lacerations to the left forearm. The employee was hospitalized.",1
"An employee was preparing a site when construction equipment backed over the employee's leg, fracturing the tibia.",1
"An employee was working from a ladder secured to a cable strand, removing a tree branch at 10 feet. The cable strand snapped and the ladder jolted, causing the employee to fall to the ground. The employee broke his left ankle and required surgery.",1
"While digging holes into the ground outside, an employee suffered from dehydration, renal failure, and a muscle injury, requiring hospitalization.",1
An employee fell while transitioning from a vertical temporary ladder to a scaffold platform.,1
An employee was adding water to the water tank on a concrete mixer truck when high wind caused the truck door to slam shut on his finger. His left middle fingertip was partially amputated.,0
"An employee was working on a steel beam that was sitting on a work bench when a chain from a crane (being operated by a different employee) hit the beam, knocking it off the bench. The beam fell on the employee's left foot, resulting in a foot amputation.",1
"An employee slipped and fell while getting out of his delivery truck. He landed on the concrete pavement, suffering four broken ribs and a hematoma. He was hospitalized.",1
"An employee was drilling holes into asphalt to install a pin barrier when the drill bit dislodged, striking the top of his right foot and causing a laceration, contusion, and broken bone.",1
"An employee was clearing a jam from a stripper machine when the employee's hand came into contact with the machine's blade, resulting in amputations to the right ring and middle fingers.",0
"An employee was walking in the lobby of an office building when she fell and broke her hip, requiring surgery.",1
An employee was riding a mule while tracking a mountain lion with hounds when the mule bucked him to the ground. He suffered six broken ribs and a separated shoulder.,1
"An employee was conducting maintenance work in the cargo area of an aircraft. The employee was leaning on the guardrails of the elevated work platform when the hinge on the guardrail failed and the employee fell approximately 4 feet, landing on a work bench below and injuring his lower back.",1
"On April 20, 2018, an employee suffered an electrical shock.",1
"An employee was attempting to wipe something off a drill press table when the employee's glove was caught in the press, which then pulled the employee's hand into the drill bit. The employee's left pinky finger was injured and eventually had to be amputated.",0
"Employees were setting trusses on a multi-family apartment building. A truss was leaning against another truss when it tipped over, swung down, and struck an employee in the shoulder. The employee suffered a shoulder fracture, requiring hospitalization and surgery.",1
An employee was holding a rope that was used to secure equipment when a second employee cut the rope from below. The rope then severed the first employee's right thumb.,0
"On April 20, 2018, at 8:30 PM, an employee was loading a truck and adjusting the load with a crane when the lifting strap came off the end of the load and crushed/fractured the employee's left hand.",1
"On April 20, 2018, an employee tripped over wires and fell while vacuuming. The employee broke a humerus and required hospitalization.",1
An employee was walking across an aisleway when he was struck by a forklift that ran over his leg. He sustained severe injuries requiring a possible leg amputation.,0
"An employee was conducting a climbing try-out on an obstacle course. During his descent from the climb, he let go of his climbing rope. The climbing rope's carabineer became detached from his rigger's belt, and he fell into the base containment box, suffering a right lung contusion, lumbosacral sprain, and paresthesia to his extremities. He was hospitalized.",1
"Two employees were repairing a broken gas line on the roof of a commercial business. One of the employees was stepping off of the roof and onto a ladder when he fell to the ground, injuring his skull and puncturing a lung. He was hospitalized.",1
"An employee was working on a heated press when it came down and crushed his left hand, breaking several fingers and requiring hospitalization.",1
"An employee was at a dumping facility when he rolled his right ankle and fell to the ground, fracturing his right femur.",1
"An employee was sliding a piece of meat onto a saw when he contacted the saw blade, lacerating his finger. He was hospitalized and had surgery.",1
An employee was unloading a transport trailer at a customer site when his left index fingertip was pinched by the customer's dock plate and amputated to the first knuckle.,1
"An employee was operating an aerial lift when the main control feed line ruptured, injecting fluid into his right palm.",1
An employee was walking to a golf cart when his lower leg moved awkwardly. He fractured both lower leg bones and experienced sharp pain.,1
An employee was working on a customer's packaging machine when the employee's screwdriver slipped and punctured the employee's hand.,1
"An employee was operating a forklift inside the warehouse. His right hand was outside the lift when it was smashed between the lift and some warehouse racking shelves, resulting in partial amputations to his right middle and ring fingers.",1
"An employee was attempting to open the jaws of his truck's fifth wheel using the manual handle when he lost his balance and fell down to the ground, fracturing his right hip. He was hospitalized.",1
An employee was about to go down a flight of stairs but noticed someone coming up the same stairs. He then re-directed to go to another set of stairs but tripped and fell. He shattered his left elbow and was hospitalized.,1
"On April 21, 2018, an employee was troubleshooting a press when it amputated the employee's left middle finger.",1
"An employee was conducting preventative maintenance on a fan bearing. While circulating the grease, the employee grasped the fan belt and manually manipulated the fan. His right index and ring fingers were then caught between the fan belt and the pulley. He sustained a partial amputation to the right index finger and a fracture to the right ring finger.",1
"An employee lost control of an unloaded electric pallet jack and was pinned between the pallet jack and fixed racking. The employee sustained a fractured pelvis, internal bleeding, and a fractured foot.",1
An employee was removing grounds when he was electrically shocked by induced voltage coming off an existing 138 KV line.,1
"An employee was preparing to groove a pipe when his left pointer finger was pulled into the groove machine, sustaining a fracture and cut.",1
"An employee was washing equipment when her finger became caught in a washer door, causing a partial amputation.",1
"An employee was using a crane to lift and repair a tool when the strap broke and the chain came down on his left hand, amputating his index fingertip.",0
"An employee was handling a piece of pipe when it slipped and caught his right pointer finger between the pipe and trailer, resulting in a fingertip amputation.",0
"An employee was cleaning a part with an air hose when part of the air hose broke off and struck him in the face, fracturing his right eye socket. He was hospitalized.",1
"An employee was repairing a pneumatic chuck's plastic air line when his left index finger became trapped between the air chuck he was working on and a work pusher that was active on the opposite side of the equipment, resulting in a fingertip amputation.",0
"An employee was at an assigned pickup location and was sweeping out a semi trailer with a broom prior to loading it when he fell out of the trailer. He struck his head on the concrete below and was knocked unconscious for a brief period. He suffered a laceration requiring staples, a concussion and hospitalization.",1
"An employee was stepping out of an ambulance when he lost his balance and fell to the ground, causing a flexor tendon injury to his left hip. He was hospitalized.",1
"On April 21, 2018, at approximately 09:00 a.m., an employee was inspecting and rolling a 7"" casing on a flat rack when the employee's right ring finger was smashed and amputated between two joints of pipe that another employee was rolling into position.",0
An employee was riding a lift gate with cargo when his right big toe went over the edge and was amputated.,1
"A building became engulfed with smoke from a worn drive belt to a ceiling exhaust fan. An employee with asthma was overtaken by the smoke, requiring hospitalization.",1
"An employee was stepping off a 12-foot ladder when he missed one or two steps and landed wrong on his right foot. He broke his right ankle, requiring surgery and hospitalization.",1
An employee was welding nuts onto studs when his foot slipped and was caught between the platform he was welding on and a piece of equipment. He broke his leg.,1
"An employee was caught between a sand truck and a sand bin while serving as ground guide/spotter on location. He suffered a laceration on his left inner thigh, requiring surgery.",1
An employee fell off an A-frame ladder.,1
"An employee fell 4 feet off a ladder while mounting equipment on the ceiling, suffering pelvic and wrist injuries.",1
An employee was outside of a scissor lift and attempting to navigate it through a door well when the lift ran over his foot and crushed his little toe.,1
"An employee was working from stilts when his stilt broke and he fell to the floor, breaking his right fibula and tibia.",1
"Employees were rigging down and started removing fluid from a line. They placed a clamp at one end of the line, but the clamp loosened and two employees were struck. One employee was hospitalized with internal injuries.",1
"An employee fell off a ladder while changing a light bulb, breaking her leg and injuring her shoulder.",1
"On April 21, 2018, at approximately 11:30 a.m., an employee was on top of a walk-in freezer performing contracting electrical work, installing J-hooks and cables on the inside of a rooftop, when he fell 23 feet to the concrete floor below, damaging his ankles and back.",1
"An employee was unloading a railcar when the railcar hose became disconnected, causing asphalt to spill on the employee's left and right hands and left wrist.",1
"An employee was operating a fuel truck on a construction access road when it struck a berm and flipped. The employee was hospitalized with fractures to the right shoulder, lumbar spine, left leg, right finger, and ribs.",1
"An employee was providing psychiatric care to a patient that was undergoing a blood draw. The patient became aggressive, kicked the employee, and pushed her across the room. She fell and hit her head on the floor, requiring hospitalization.",1
An employee slipped while climbing back onto a forklift and fell to the ground resulting in a broken right wrist and hip.,1
"On April 22, 2018, an employee was using a ladder to obtain product for a customer when the employee fell 8 feet off the ladder to the ground, suffering multiple fractures.",1
"An employee was placing sheet metal panels onto a base form when his left middle finger was pinched between the panels, resulting in a surgical amputation.",1
"An employee was hit by an elevator door while loading costumes onto the elevator, suffering injuries to the face and chest.",1
"A volunteer missed a step and fell down stairs, suffering a dislocated elbow.",1
"An employee was cleaning a gutter from a ladder. While coming down the ladder, he missed a step, lost his balance, and fell, fracturing his legs.",1
An employee was bending over to assist a patient dress. The patient put his weight on the employee's shoulders causing a strain to her left knee.,1
"An employee was working at a bagger machine when the pusher cycle was activated. He was then trapped between the bagger and the bagger chute, crushing and fracturing his pelvis.",1
"An employee was welding next to railroad tracks. He removed the slag pan, stepped across the rail, and down the ballast section to dump slag from the slag pan. The slag slipped out of the pan and into a ditch with water adjacent to the tracks, resulting in an explosion. The employee suffered third degree burns, requiring hospitalization.",1
An employee was operating a stand-up forklift to transport palletized material into a warehouse freezer when the forklift slid on some ice. His left foot was pinned between the forklift and a pallet on the floor causing a fractured ankle.,1
"An employee was backing a powered pallet jack into a spot when his fingers were caught between a rack and the handle of the pallet jack, resulting in a middle finger amputation to the first knuckle.",0
An employee was unloading boxes of furniture from a shipping container when a large tabletop struck and knocked the employee to the floor. The employee suffered a broken left hip.,1
"An employee was loading material on a loading dock when he lost his balance, fell, and rolled off the edge of the loading dock, lacerating and contusing the back of his head.",1
"On April 23, 2018, an employee was kneeling down to measure a fuel cover lid when a fuel truck backed up and struck the employee. The employee suffered a severed liver/spleen, fractured pelvis, broken right ankle, and broken left foot.",1
Employees were hoisting a motor for an elevator with a gantry crane. The crane tipped over and the top support beam for the gantry crane struck an employee in the left leg. The employee suffered a broken and dislocated left foot.,1
"An employee was using a lattice boom crawler crane to unload a 20-ton section of anchor chain from a vessel. As the employee was moving the anchor chain with the crane, the crane flipped over. The employee jumped out of the cab as the crane was flipped over was injured. The employee sustained broken teeth, a severe pelvic ring injury with sacral fracture, and vertebral disc herniation in the L3-L5 and L5-S1 areas.",1
"An employee was getting supplies from a laundry supply closet when a spider bit her lower left leg, requiring hospitalization.",1
"An employee was helping another employee weld a truck when the truck rolled. The back tire then pinned the employee in the hip area, requiring hospitalization. The truck wheels were not chocked at the time of the incident.",1
"An employee was transporting a 30-yard container to a transfer station. The employee opened the rear door of the container and a plant pot fell, hitting and lacerating his left arm.",1
"An employee was moving a trailer with a yard tractor when he fell from the tractor cab ladder onto the concrete floor, striking his head.",1
An employee was installing a gravity fed conveyor belt when his left ring finger was crushed between two conveyor systems. His left ring finger broke and had to be medically amputated at the first knuckle.,0
An employee was crushed between a truck and a trailer resulting in a fractured and lacerated arm.,1
"On April 23, 2018, an employee was loosening a bolt from a lifting device that was attached to a piece of steel when the steel shifted. The employee's left hand was caught between the suspended steel and another piece of steel, fracturing three fingers and requiring surgery.",1
"An employee was exiting his truck when he slipped and fell, injuring his left buttock and leg. He was hospitalized.",1
"An employee was using a rope and pulley system to lower asbestos bags from the seventh floor of a boiler when the rope (which was wet) slipped in his hands and looped around his right thumb, severely lacerating it and resulting in a surgical amputation at the first knuckle.",0
An employee was attempting to adjust a tote on a cart when one of the tote legs slid down and sheared off two of his fingertips between the tote and cart.,0
"An employee was working on a car engine when his finger came in contact with a sharp object, resulting in a left middle finger amputation.",0
"A forklift-loader operator was moving feed for cattle inside a pen when a cow charged the operator. The operator quickly spun the loader around to avoid the cow and struck an employee standing nearby, pinning him against a fence/gate inside the pen. The employee suffered internal injuries with cuts and lacerations.",1
An employee was tearing off a roof when a tool in his hand came into contact with an overhead powerline. He suffered an electrical shock.,1
"An employee was using a railing for support while she was going down a two-step stairwell at a unit that was not in move-in condition when the railing broke. She then lost her balance and fell backwards on the floor, bruising her back and requiring hospitalization.",1
"An employee was guiding a crane that was hoisting an air conditioning unit onto the roof. The crane released and the unit fell, snapping a riser clamp against the employee's right index finger, which was crushed and amputated.",0
"An employee was operating a forklift with a hopper attachment to dump trash in a dumpster. While releasing the handle to allow dumping, the employee placed his left hand between the hopper and the forklift tine to reach up to release the lever. When it released, the weight shifted, pinching his left ring finger between the hopper and the forklift tine. This resulted in a crushing injury that required amputation to left ring fingertip.",0
"On April 23, 3018, an employee stepped back and fell approximately one story though a hole in the floor to a concrete floor below. He broke his wrist, requiring hospitalization and surgery.",1
An employee was helping to place a pin into a shoe bolt on a frame that was being raised and lowered by a forklift when material slipped and smashed the employee's left middle finger. The finger had to be surgically amputated.,1
"An employee was cleaning out debris around a fixture when he came in contact with a milling bit, puncturing his skull. The bit was guarded at the time.",1
An employee went inside a truck trailer while it was being loaded by a forklift. The forklift operator did not see the employee and turned the forklift in a way that smashed the employee's left hand between the forklift and the side wall of the trailer.,1
"An employee was climbing a ladder built into a fertilizer tank trailer to access the lid and fill the tank when the employee slipped and fell from the ladder to the ground, landing on and breaking the right hip. The employee was hospitalized.",1
"An employee was cutting a 1-1/2"" square compression sample with a chop saw when the saw blade struck and lacerated the back of the employee's left hand.",1
An employee was using a strap to move trees. He was pulling a tree by the wire basket around the ball when the wire basket broke. The strap snapped back and the hook cut the employee's face.,1
An employee was hooking up an aerator to a power tractor when the PTO shaft slipped and crushed his left middle finger resulting in a fingertip amputation.,0
"An employee was using a band saw to cut samples from a sub frame when the saw cut into the employee's right index finger, requiring hospitalization and surgery. The saw was guarded at the time.",1
"An employee was servicing a material handler (mobile equipment) and bringing the hood down when he stepped backwards and fell. When he fell, the hood came down on his right arm, fracturing his wrist and requiring hospitalization and surgery.",1
An employee was starting up an aluminum sweat furnace when he received burns on his arm and elbow.,1
"An employee was on a ladder taping off a window for paint when he fell to the ground, breaking his back.",1
"An employee was cleaning underneath a bulk tote dumpster using a compressed air wand when he noticed a piece of cardboard lodged underneath. He was attempting to blow out the cardboard when the machine cycled, pinning his arm between the piece of equipment and the floor. He sustained injuries to his left forearm that included a broken radius and ulna as well as lacerations to the skin. He was hospitalized.",1
"An employee was operating a machine when a tube became stuck in a pneumatic roller. He went to remove the tube from the roller. When he removed enough pressure from the roller, the tube ejected out of the machine, lacerating and breaking his left pinky finger above the first knuckle.",1
"An employee was retrieving a door when it fell on top of him, knocking him down to the concrete floor. He hit his head and arm, requiring hospitalization.",1
An employee was under a boom lift and while the boom lift was being lowered the employee lifted his head striking the boom lift resulting in a concussion and laceration to the head.,1
An employee was patrolling his area when the ATV he was using rolled and landed on top of the employee resulting in a broken lower right leg and injury to the right eye area.,1
"An employee was assembling a metal cabinet while standing on a 36"" platform. When he dismounted from the platform, his wedding ring became caught on a bolt or other fitting on the cabinet, which removed the skin from his left ring finger. His finger had to be medically amputated.",0
An employee was lighting a cutting torch to remove an out-of-service tank when a second tank ignited. The employee suffered a broken leg and second degree burns to the face.,1
"A temporary employee was taking glue and paper from the cutter end of a pleater machine. Another employee was at the pleater belt end of the machine. The employee at the pleater belt end rolled the belt and her right index finger went under the knife, amputating her fingertip. The machine was unguarded at the time.",0
"On April 24, 2018, an employee fell approximately 24 feet from a new power pole that was having a light installed. The employee was hospitalized with a fractured back.",1
"An employee was installing a 215-pound toggle into a crushing machine when the toggle slipped and fell onto his left ring finger, catching it between the toggle and the machine frame. His finger suffered an avulsion that led to a surgical amputation of his fingertip.",0
"An employee was transporting a ladle from the furnace to the casting area using an industrial truck.  The front tire hit a pothole causing the molten silicon to spill to the ground which caused an explosion resulting in second degree burns to the employee's face, upper back, left arm and neck.",1
"While unloading scaffold materials from a flatbed truck, an employee slipped off the truck and dislocated his right ankle.",1
An employee suffered an asthma-related reaction when other employees were performing maintenance on an ice machine down the hall using a degreaser product.,1
"An employee was using a circular saw when it lacerated the employee's pinky finger, requiring surgery.",1
"An employee was testing a machine to ensure it was not leaking when water sprayed from the machine, which had an electrical current running through it, and onto the employee's left hand. The employee received an electrical shock.",1
"An employee was installing siding on a wall from a scaffold when he fell about 8 to 10 feet to the ground below, fracturing his ankle and suffering other injuries.",1
"An employee opened a closet door, which struck a nearby ladder and caused it to fall. He heard the striking noise, turned toward it, and was struck in the head by the falling ladder. He suffered a concussion, laceration, and broken nose, requiring hospitalization and stitches.",1
"An employee was cutting rebar with a cut-off saw when the employee's clothing caught fire, causing burns to approximately 70% of the employee's body.",1
An employee was operating a shaper machine (table mounted router) when the employee's hand slipped and went into the bit resulting in amputation of skin on the left middle fingertip.,0
"An employee was operating a trim machine when the employee's right middle finger contacted the rotary trimming knife, amputating the fingertip at the fingernail.",0
"An employee was operating a motorized, ride-on pallet jack to load a freezer when the pallet jack struck a bollard, throwing him to the floor. He suffered a fractured skull and minor bleeding.",1
"An employee fell to the concrete floor while working in the shop/warehouse area, fracturing both wrists, a femur, and an eye socket.",1
"An employee rode a bike off the back of a truck that was approximately 4 feet off the ground. He fell off the bike and hit his face on the concrete, breaking his jaw.",1
"An employee was acting as a spotter for a crane to help guide sheet metal into place when a nearby light pole became loose and fell on top of him, breaking his leg.",1
"An employee was driving a reach machine from the cooler dock to the dry dock carrying approximately 14 pallets. As he was driving towards the fast roll-up door between the cooler dock and the dry dock, he turned his reach machine to the left. The reach machine then headed toward a yellow bollard that protects the fast roll-up door. Worrying he was going to strike the yellow bollard, he attempted to stop the collision using his foot. His left foot was then caught and severely crushed between the yellow bollard and the reach machine.",1
An employee suffered a burn and was having chest pains. The employee went to the hospital where they treated the burn. The employee was admitted to the hospital for chest pains.,1
"While transferring a plastic sheet onto a pallet, an employee fell 7 feet into a grinder pit due to an unfastened floor plate. The employee suffered three broken ribs, a punctured lung, and a broken scapula.",1
An employee was hospitalized from an injury caused by a forklift accident.,1
"An employee was cleaning out a cable stripper and opened the cabinet that houses the stripper wheel when his glove was caught in the wheel, pulling in his left hand. His left ring finger was amputated and his left middle finger was severely injured.",0
"An employee was using a cat's paw tool to pull out a screw when the screw popped out and hit his eye, scratching his cornea and iris. He was hospitalized. Safety glasses were not worn at the time of the incident.",1
"An employee was walking on the roof to bring tape to his co-worker who was repairing a skylight when he stepped onto the old skylight with plexiglass in place and fell about 15 feet through it to the floor. He sustained three cracked vertebrae, a cracked rib, and a bruised hip, requiring hospitalization.",1
"While stepping up onto a truck sidestep, an employee missed the step and fell less than 3 feet, suffering two fractured ribs and a possible bruised lung.",1
"An employee was in a bucket truck installing a temporary drop when the employee fell approximately 12 feet out of the bucket to the ground, fracturing the spine and ribs and suffering a broken blood vessel in the brain.",1
"A employee was fastening a structural member at a roof eave strut when the employee fell from the eave and landed on a concrete slab, suffering a broken pelvis, broken nose, and contusions.",1
"An employee was tensioning a come-a-long that was attached to a brace plate. The injured employee noticed the come-a-long needed adjustments and stopped work. As the injured employee straddled the come-along to make adjustments, the come-a-long broke free and hit/fractured his left leg.",1
An employee conducted a training jump and was gliding through the air with a parachute when the employee landed hard and fractured the L1 vertebra.,1
"An employee walked out from behind some boxes and was struck by a fork truck, suffering a fractured right foot and other internal injuries that required hospitalization.",1
"On April 24, 2018, an employee was attempting to unjam a blanket machine when another employee operated the machine, which then lowered a metal bar on the first employee's arm. The employee's arm was crushed.",1
The injured employee was conducting housekeeping operations and struck his upper left eye lid on a file holder.,1
"An employee was walking in the parking lot from one office to another when she tripped and fell between the curb and sidewalk, breaking her left leg and requiring hospitalization.",1
An employee was standing on a chair to access a circuit breaker panel when the employee fell from the chair and into a mirror. The mirror broke and a piece of glass from the mirror amputated the employee's left pinky finger.,1
"An employee slipped on a boulder while crossing a creek, suffering a compound fracture of the fibula. The employee was hospitalized and had surgery.",1
"An employee was reaching into a plasma punch machine to retrieve a stuck part when the trap door inside the machine closed on the employee's right forearm, crushing the soft tissue and fracturing the ulna.",1
An employee was using a powered saw to cut a piece of wood that was supported by two saw horses when the saw cut his hand. He was hospitalized.,1
"An employee was cutting lumber on a chop saw when his right hand contacted the blade, amputating his index finger and thumb and partially amputating his middle finger.",1
An employee was helping to load a conveyor during a new equipment startup. His left hand was on top of the conveyor enclosure with his thumb near the door rail track bearing when the operator actuated the equipment's door closure switch. The door then came down on and partially amputated the employee's left thumb.,0
An employee lost control of a chainsaw and lacerated his right thigh. Personal protective equipment was not worn at the time.,1
"An employee was pulling a wire while walking backward when the wire came loose. The employee then fell over a tree limb and landed on his back, breaking three ribs and suffering a collapsed lung.",1
"An employee slipped and fell while exiting an excavator, suffering head, face, and hand contusions.",1
"On April 25, 2018, an employee tripped over a loose plastic box strap, contacting the ground and sustaining a spiral fracture to her femur.",1
An employee's foot was crushed by a forklift.,1
"An employee was trying to disconnect a high-level flow sensor that was going off in the acid farm area when acid contacted the employee's foot and lower leg, causing second degree chemical burns.",1
"An employee was cleaning a glue spreader roller when the rag he was using was pulled into the roller, catching and injuring his thumb.",0
"An employee was helping to clear a plug from a ventilation duct. The duct work was unattached at the top, bottom, and one side. The duct then shifted and caught his right hand, amputating his index fingertip, fracturing his index finger, and lacerating his middle finger.",0
"While getting into the cab of a truck, an employee slipped and fell, suffering a laceration to the head and a concussion. The employee was hospitalized.",1
An employee was cleaning a grease trap and dropped the grease trap onto his toe. The employee was hospitalized for a fractured toe.,1
"While attempting to remove a bumper from a rack, an employee suffered a right pinky fingertip amputation.",0
"An employee was in an aerial lift cutting a section of a tree when the tree section spun around and hit him in the face and head. He was hospitalized with a concussion, small facial fracture, skull fracture, laceration to the face, and chipped teeth.",1
"An employee was walking down the sidewalk when she cut across a grassy area and tripped. She then fell to the ground, fracturing her hip.",1
"An employee was dropping off a patient at the facility. After he placed the patient in the room, he tripped and fell while coming out of the room, fracturing his right tibia.",1
"While conducting fire/evacuation drills, an employee dismounted from the back of a school bus (approximately 4 feet from the ground) and suffered a right hip fracture, requiring hospitalization and surgery.",1
"An employee was inspecting a bent rim on a car when his hand was caught between the rim and the car's caliper, severing his middle finger.",1
"An employee was going to clean an evaporator when the employee's right middle finger was pinched between two stainless steel-hinged lids (doors), resulting in an amputation just behind the nailbed.",0
"An employee was exiting a building when a door closed on her left pinky fingertip, resulting in a partial amputation.",0
"An employee was unloading a railcar to a tanker truck when 50% sodium hydroxide splashed in the employee's eye and face, causing chemical burns.",1
"An employee was tightening a screw cap on a pipe when the cap broke loose and struck the employee's face, breaking bones in the cheek and below the eye. The employee was hospitalized.",1
An employee was walking down the hall pushing a cart when the employee tripped over the cart and fell on the left knee. The employee suffered a left femur fracture that required hospitalization.,1
"An employee was installing metal trusses when he fell approximately 15 feet before he was caught by his harness' fall protection system. He landed on his feet and then fell to the ground, breaking an arm and elbow. He was hospitalized.",1
"An employee was checking on a maintenance employee who was working on a deflasher when the turn table came down and pinned his left forearm, fracturing it and requiring surgery.",1
An employee was moving a metal cart when he began to fall. He then grabbed the corner of the cart and avulsed his right middle and index fingers. Slip-resistant shoes were worn at the time of the incident.,1
An employee was walking near a railing system used to move large parts along a trailer manufacturing production line when a trailer's sub frame weighing 200 to 300 pounds fell off the railing and struck the employee. The employee suffered broken metatarsal bones and required hospitalization.,1
An employee was operating a table saw while cutting PVC pipe when the saw amputated the employee's left pinky finger.,1
"Employees were moving a piece of floor tile during a two-man lift when one of the employees slipped on a wet grassy area and fell on his back, suffering a back injury.",1
"While covering vent systems with plastic, an employee stepped onto a hole cover for a vent shaft and the cover gave way. The employee then fell from the 16th floor to the 5th floor in the vent shaft, fracturing both ankles and three vertebrae and suffering several lacerations.",1
An employee was holding/guiding a chain that went to an underwater slide gate when the gate became free and squeezed his finger between the chain and cement wall. His right little fingertip was amputated.,0
"An employee was caught between a paper roll and the guard protecting the control panel, suffering a broken pelvis and requiring hospitalization.",1
"An employee was struck by a cap that was installed on a 12"" water line. The cap blew apart, striking and amputating his right leg.",0
"An employee was pulling clothes on an overhead trolley when the overhead trolley jumped on a curb, came off, and hit her head. She was hospitalized with a concussion.",1
"While performing maintenance, an employee was crushed between the cartop of an elevator crosshead and an overhead safety beam. The employee sustained broken ribs on both sides of the torso.",1
An employee was installing metal decking when a sheet moved off its support. He then fell to the next level and broke 5 to 6 ribs.,1
"After cutting a hole in a concrete wall, an employee was attempting to pick up a pallet when the employee slipped and fell through the hole, falling approximately 10 feet to the concrete floor on the other side. The employee suffered cracked ribs and was hospitalized.",1
An employee had just finished delivering mail to a residence and was taking a shortcut across a yard when he tripped over a tree root and fractured his left hip. The ground was a bit muddy at the time.,1
"An employee fell backwards while mopping the floor, suffering a tailbone contusion.",1
An employee was cleaning the hallway and moving drywall when another employee pulled a piece of drywall from the top. The drywall fell on and injured the left lower leg of the employee who was cleaning.,1
"An employee was cleaning a fat removal machine when it cycled. The employee's left fingertip and middle finger were caught in the equipment, resulting in amputations.",0
"An employee was cleaning rollers when his hands were caught in the rollers, causing amputations to three fingers.",0
An employee fell off a ladder and hit his head on a printing press. The employee was hospitalized for a concussion.,1
An employee was driving a pallet jack around a corner when his left leg was pinned between the pallet jack and rollers. He fractured his leg and was hospitalized.,1
"An employee was using a tool to unjam a grinder machine when the grinder grabbed the tool and pulled his right hand between the tool and the framework of the grinder, de-gloving his hand and smashing his right ring fingertip. His fingertip was amputated. The machine was not locked/tagged out at the time of the incident.",0
"While conducting maintenance on top of a double cone process, an employee stepped on a valve that released >200 degrees of fluid. The fluid contacted the employee, causing burns to the shoulder, abdomen, and torso.",1
An employee was rolling metal material in the rolling machine and pinched their left index finger in the roller.,1
An employee was operating an overhead crane to lift a metal rod when the rod fell on and amputated his left hand.,1
An employee was cutting a big piece of aluminum on a vertical band saw and amputated his right middle finger.,0
"On 4/26/2018, an employee was performing maintenance on the conveyor belt system at the start of the work shift and partially amputated his left middle and index fingers. The machine was running and unguarded at the time of the incident.",0
"An employee's hand went under a motorized conveyor, resulting in a partial amputation of the left middle and index fingers.",0
"An employee was climbing a 15-foot, job-made wooden ladder to access a machine room when the ladder shifted. He then fell approximately 10 feet to the ground below, landing on his feet. He fractured his right heel, sprained his left ankle, and strained his back.",1
"An employee was attempting to straighten a pipe that was sitting on a pipe rolling rack when his right middle finger was caught between the pipe and one of the rollers that was on the rack, resulting in a partial amputation.",0
"An employee was unclogging a pulp screw conveyor drain cup when his hand contacted the moving screw auger, amputating his middle and ring fingers and his index fingertip.",1
"An employee was cutting pipe at a wellhead when a pocket of oil suddenly surfaced (well was plugged). A flash fire then occurred, causing second to third degree burns to both of the employee's hands and the right side of the stomach. PPE was not worn at the time of the incident.",1
"An employee was bagging bread at a bagger machine when it became jammed. As she attempted to unjam the machine, another employee activated the machine, which then amputated an eighth of an inch of her left index fingertip. The machine was not locked out at the time of the incident.",0
An employee was cleaning out a piston on a chemical pump and amputated the right index finger to the fingernail in a pinch point between the piston and the cylinder.,1
"A rigging crew was adjusting the straps of an 800 lb. steel beam member being lifted as part of a steel building construction when the beam clamp slipped and the beam fell, striking an employee who was checking rigging nearby on his back. He suffered broken ribs and lacerations.",1
"While using a handheld burner torch, an employee caught on fire, suffering burns to the right hand and leg.",1
"An employee was assisting a patient in a shower when the patient slipped and fell. The employee suffered back injuries while attempting to catch the patient from falling, requiring hospitalization.",1
"On April 26, 2018, an employee fell from a single-story garage onto the concrete below, suffering a fractured skull, punctured lung, and fractured ribs.",1
An employee was cutting wood with a bench saw when it amputated the employee's left middle fingertip. The saw was unguarded at the time.,0
"An employee was checking equipment in the paint shop when he tripped over a bag that was sitting on the floor and fell, landing on and fracturing his left elbow.",1
An employee was climbing up onto a racking system to straighten the load that was stored on the rack when he fell off and ruptured his colon.,1
"An employee was cutting rebar using a 4-inch grinder when it started to spark and created a fire. The sparks ignited his vest and sweater, and he received a burn to the right side of his abdomen and chest.",1
An employee was de-burring a part on a rotating machine while wearing cotton gloves when her glove was caught in the machine. Her right index finger was then amputated at the first knuckle.,1
An employee was loading a stamped part into a die. The employee's hands were inside the press when it cycled resulting in amputation of the last joint of the left ring finger and the middle and index fingertips.,1
"An employee was working on a pipe rack arm when it slipped and pinched the employee's left index fingertip, amputating it.",0
"An employee was hooking up a trailer to a truck. His left index finger was on the trailer tongue when the tongue dropped over the truck ball, catching and partially amputating his finger between the trailer and the truck.",1
An employee was using a gas-powered pressure washer inside the basement of a residential construction site to wash out the concrete floor when he started to feel dizzy and was overcome by carbon monoxide poisoning. He was hospitalized.,1
"An employee climbed out of the passenger side of a waste truck to position some waste containers. The truck continued moving and ran over his right foot, breaking it.",1
"On April 25, 2018, an employee was driving a side loader when the brakes locked and the loader abruptly stopped. The employee fell to the ground and fractured both wrists.",1
"An employee was attempting to clean a glue rolling machine with a rag when the roller caught the rag and pulled the employee's right hand into the machine, crushing her pinky and ring fingers. Her pinky and ring fingertips had to be  amputated.",1
"An employee was walking to his truck when he slipped in the mud and hit his head and back, suffering a concussion and spinal fracture.",1
"An employee was making his rounds when he identified a level indication in the vessel that he was not sure was accurate. He then drained the sit glass and the material (mineral spirits polyethylene wax and ethaline gas) ignited a flash fire, burning his left palm, both forearms, and his left calf. He was hospitalized.",1
An employee was operating a forklift and backed into another lift catching his left leg between the two lifts and fracturing it.,1
"On April 24, 2018, an employee was operating a hydraulic shear to cut samples when the shear's hold-down clamp crushed the employee's left index finger, resulting in a partial amputation.",0
"An employee was helping a second employee feed corrugated fiberboard sheets into a slotter machine at approximately 16:15. They determined that a piece of tape was creating issues with the sheets as they fed them into the machine. The first employee was attempting to remove a piece of the tape when the machine cut his left little finger, resulting in an amputation.",1
"An employee was standing on the second stage of a forklift trying to reach and wrap around to hook an attachment. He then lost his footing, tripped on the overhead guard, and fell to the floor, where he passed out. He was hospitalized with a concussion.",1
"An employee was removing dirty dishes when he dropped a glass. As he tried to catch it, the glass shattered and cut his right hand. He was hospitalized.",1
An employee was driving an ATV and struck a tree resulting in a fractured left femur.,1
An employee was simultaneously disconnecting a plug from its power supply and a plug from a barrel crushing machine when his hands crossed and he received a 480-volt electrical shock.,1
"An employee was grabbing a stand pipe from a 'V' chute to guide it when the pipe swung out. The employee then fell approximately 15 feet, breaking ribs and the hip.",1
"On April 27, 2018, an employee was removing a sauté pan from the stove when oil from the pan spilled and entered the cuff of the oven mitt/glove the employee was wearing. The employee suffered a burn to the left hand and was hospitalized.",1
"An employee was loading a single-man aerial lift when the lift fell back and struck him, fracturing his skull and lacerating his face and ear. He also suffered a possible leg fracture.",1
"An employee simultaneously rolled two test coupons to prepare them for a pre-test for a new welder. A coupon consists of the end of a pipe and weighs about 50 pounds. The employee's left thumb was pinched between the two rolling coupons, tearing the tissue from the thumb tip, which required surgical removal of about 1 mm of bone.",0
"On April 27, 2018, at approximately 7:00 AM, an employee was operating a drill and had just finished drilling two holes in some square tubing when he attempted to grab a shaving near the drill bit, which caught his glove. His left thumb was then pulled into the drill bit, severely cutting it and resulting in a partial amputation.",0
"An employee was using an overhead crane to stack steel beams in the beam yard when the employee's left ring and pinky fingers were smashed between two beams, requiring hospitalization and surgery.",1
"An employee was loading a container on a tilt bed trailer when the container shifted and crushed the employee's right foot, resulting in an amputation.",1
"An employee was retrieving PVC pipes from storage for a customer. The PVC pipe bundles were stacked. When the employee cut the bands on a PVC pipe bundle near the bottom of the stack, the bundles shifted and collapsed on top of the employee.",1
"Two employees were moving a dolly containing sheet rock when a wheel became caught on top of a drain. When they tried to free the dolly, some of the sheet rock fell. One of the employees tried to stop the sheet rock but was struck, breaking a leg, knee, and ankle.",1
"A 2,000-pound tote of rice was placed on the top of another tote that was leaking rice. An employee and two others were trying to repair the bag, which had been damaged by forklift forks, when the top tote fell on the employee, who suffered a broken left tibia.",1
"An employee fell from the trailer of his delivery truck, breaking his ribs and clavicle.",1
An employee was walking next to a pipe that was being moved with a forklift when the synthetic strap slipped off the pipe and one side of the pipe fell onto the top of the employee's foot behind the protective steel toe. The employee sustained a dislocated big toe and open and closed fractures.,1
"An employee used a stationary horizontal band saw to cut a piece of sheet metal about 15 feet long. When the employee went to move the piece of sheet metal, the end hit an adjacent portable band saw, causing the portable band saw to tip off its stand. The employee walked over to upright the tipped over portable band saw and it completely fell off the stand. As the portable band saw fell, the employee's finger was caught between the stand and the falling portable band saw, causing lacerations and crushing injuries to the left pinky finger, which required hospitalization and surgery.",1
"An employee fell backwards off a step stool, hitting her head and suffering a possible concussion.",1
"An employee was pushing a food cart through a door jam when another employee walked to the opposite side of the food cart, reached up, and tried to help the employee pull the cart through the door jam. When he did that, the food cart pinched the first employee's finger between the food cart and the door jam, amputating the very tip of the middle finger on his right hand.",0
"While playing volleyball, an employee jumped and collided with a participant, landed awkwardly, and broke the right leg. The employee was hospitalized.",1
"On April 27, 2018, at approximately 11:50 PM a forklift operator attempted to pass another employee who was on a standup forklift moving product. The forklift operator bumped the standup forklift platform as the back end of the forklift swung out and the standup forklift struck a rack where the injured employee's left calf was pinched between the rack and the standup forklift resulting in an avulsion injury to the left calf.",1
"An employee was riding on the rear step of a residential refuse truck. When the truck made a left turn, his left hip hit a concrete pole, causing a stress fracture to the left side of his pelvis.",1
"An employee was using a band saw to cut meat when the moving blade lacerated his right index and middle fingers, requiring hospitalization.",1
An employee was moving a piece of equipment when he tripped over a rail and fractured his left ankle while trying to catch himself.,1
"An employee was cleaning her workstation and organizing her files when a section of the acoustical ceiling (tiles and grid), adjacent light fixtures, and portions of the plaster ceiling above suddenly collapsed due to a prolonged, concealed steam leak that weakened the fastener connections. She sustained a cut to her head, bruise to her head, scratches on her neck, a scratch to her left hand, and irritation to her right hand, requiring hospitalization.",1
A temporary employee was operating an order picker and was 20 to 30 feet high when the employee fell from the order picker onto the concrete floor. The employee was hospitalized with severe head trauma due to a skull fracture.,1
"A crew was installing a top drive track during a rig move when it became hung up on a girt. The top drive track was freed and whipped, striking an employee in the head. The employee suffered broken right cheek bones, a broken jaw bone, and a right shoulder injury.",1
"An employee was attempting to clean off a machine's sensor when the machine started to move. As he attempted to remove his hand, his right middle finger was caught in a chain and sprocket, tearing off his fingertip. The machine was not locked/tagged out at the time.",0
"An employee had replaced a truck's fuel filter and got fuel on his wrist and hand. When he reconnected the power wires to the fuel pump, it sparked and ignited the fuel on his left hand, burning it.",1
"On April 28, 2018, an employee was guiding a forklift operator when the forklift lowered a crate onto his foot, crushing his right big toe. His toe was later amputated.",0
An employee was checking a possible problem with a chain and sprocket while holding a screwdriver with his left hand. He attempted to jog the machine over and the chain caught the screwdriver. The nail and underlying part of one of his fingers was then pinched off.,0
"An employee was cleaning kitchen hood fans from a step ladder when he lost his balance and stepped into a rethermalizer filled with hot water. He received second and third degree burns to his foot, requiring hospitalization.",1
"An employee was using a ladder to try to enter a window that led to an office that had inadvertently been locked with the keys to the door left inside. The employee fell off the ladder from the third or fourth rung, sustaining broken vertebrae.",1
"An employee was coming down from a fixed ladder when he missed the last step, lost his balance, and fell to the ground, breaking his ankle.",1
An employee slipped and fell while descending a fixed ladder. The employee's hard hat then lacerated the back of the employee's head.,1
An employee was performing sub-arc welding on a power section when a flux catcher bin ignited due to someone throwing plastic and other trash in the bin (it is strictly for catching welding pieces). The employee was overcome by smoke inhalation and required hospitalization for carbon monoxide exposure.,1
An employee on a vessel out at sea opened an unlabeled container that smelled strongly while preparing to clean and sanitize factory equipment resulting in burns to the employee's nose and throat. The employee was hospitalized.,1
An employee experienced shortness of breath and pain in the rib cage while pushing equipment onto a truck. The employee was hospitalized.,1
"An employee was winding tape onto a condenser when the employee's glove became caught on the tape, which then pulled the employee's arm in and around the condenser. The employee's arm broke and required surgery.",1
"An employee was running a jumper on a dead-end structure when an electrical event occurred. He received electrical burns to his forearm, the underside of his bicep area, and his left-side torso, requiring hospitalization.",1
"An employee was attempting to remove cake batter from a hopper when the machine cycled, catching the employee's right thumb between the moving plunger and the fixed die cutter. The employee's right thumb tip was amputated.",0
"An employee was going to retrieve supplies from a storage shed when he disturbed a hornets nest. He backed up quickly to avoid being stung and fell to the ground, breaking his hip and requiring hospitalization.",1
An employee was attempting to remove waste/scrap yarn from a roller shaft when the turning roller amputated his left index finger. The roller shaft was unguarded at the time.,0
An employee was adjusting the wire length setting on the machine when the hydraulic hose on the machine failed at the crimped connection causing the hose to whip and strike the employee's lower leg. The employee sustained lacerations to the leg and a broken ankle.,1
An employee was walking through a semi-wooded area when a rattlesnake bit the back of his leg.,1
"An employee was cleaning remaining asphalt out of the corners of a buggy hopper with his back to a delivery truck. When the buggy moved forward, the employee was caught between the buggy and the delivery truck. The employee sustained a broken hip, bruising and abrasions to the right leg and an abrasion on the left leg.",1
"An employee was climbing a caged area to reach a wooden pallet. While the employee was descending the cage, he lost his footing and fell against a metal pole, suffering three cracked ribs and multiple bruises. He was hospitalized.",1
"An employee went to close a breaking machine. When he grabbed the handle he reached over the top of the machine to secure the handle with his left hand. He then pulled the handle and lost his balance. His right hand slipped into the pinch point, which closed on and amputated his right pinky fingertip.",0
"An employee was talking on the phone at the front desk when he slipped and fell on the wet floor, landing on his back and fracturing his L-1 vertebra. He was hospitalized.",1
"An employee lost his balance while exiting from a ladder onto a one-story roof.  He fell, hit the roof, and then fell to the ground, landing on his feet. He fractured his right ankle and left heel.",1
"On April 30, 2018, at approximately 3:00 p.m., an employee was in a bucket truck tapping up a new service on a secondary 120/240 volt line when two hot wires made contact, causing an electrical flash. The employee received a second degree burn to his left hand, which was ungloved at the time.",1
"An employee was burned with hot water while operating a dish washing machine. He received second degree burns on his face, left arm, and abdomen.",1
"An employee was in a cooler getting something off a top shelf. The employee stepped up on a dunnage rack with the left leg to reach the product. When stepping back down to the floor, the employee's left leg slipped out. The employee then fell to the floor and suffered a broken left hip.",1
"An employee was hanging a coil of steel on a coil holder using a metal mesh sling. The sling was being removed when the crane eye caught the shaft of the mandrel.  The employee's left middle finger was then caught between the eye of the sling and the mandrel, amputating the fingertip.",0
An employee was stepping from a doorway down a single step to the main floor when he fell and re-injured a knee that had recently had surgery. He was hospitalized.,1
"An employee was climbing down the ladder from the catwalk area on the front of a discharge ready mix cement truck that was wet from being washed. While standing on the finder, the employee turned right toward the grab rail. As the employee stepped down to the next step, the employee lost balance and fell approximately 51 inches to the ground. The employee suffered nine broken ribs and was hospitalized.",1
An employee was attempting to feed meat through a meat grinder when it injured the employee's right-hand muscle and ligament. The machine was running at the time.,1
"An employee was servicing a bucket on a wheel loader when the coupler fell and struck the employee's legs, breaking them.",1
"An employee was performing maintenance on a pump at a gas well frac job. The employee removed the top cap off of the pump and removed the top valve. The employee went to remove the bottom valve and the pump stroked, catching and crushing the employee's right hand. The employee suffered a hand injury and was hospitalized.",1
"An employee was shutting the door to a truck when the employee fell from the lift gate, fracturing three ribs.",1
"An employee was standing on a 6- to 8-foot A-Frame ladder to change curtains in an ICU hospital room when he lost his balance and fell.  He landed on a sitting chair that was next to his ladder, fracturing ribs on his upper right side and puncturing his lung.",1
"An employee was unloading material from a platform ladder when the arm of a hydraulic tarping mechanism contacted the ladder, causing the employee to fall to the ground below. The employee sustained a head injury.",1
An employee was helping a team move a railcar on a high rail when his left hand became trapped and crushed by the rail car wheel. His pinky was amputated.,0
"An employee was moving a full 55-gallon drum onto a cart when it tipped and began to fall. As he tried to catch the drum, it struck and broke his right ankle.",1
"An employee was helping to hitch a trailer to a truck when the truck backed up. He was pinned between the truck and trailer, suffering a laceration and partial amputation.",1
"An employee was working on field equipment when a bearing fell on his right toe, crushing it.",1
"An employee was using a table saw to cut a starboard panel when the panel kicked back and broke his wrist, requiring hospitalization and surgery.",1
"An employee was installing insulation in a home. As he was closing an open hurricane-resistant window, it came down on his left pinky finger and severely lacerated it.",1
"An employee was retrieving a canine from a kennel when it bit the employee's left forearm, requiring hospitalization.",1
An employee was placing material onto an electric pallet jack when a forklift operator ran into the employee. The employee was hospitalized for a fractured toe.,1
"An employee dropped a sampling container into a cooling airlock. As he attempted to retrieve the container, his right index finger was amputated (between the middle and distal joint) by the cooling airlock.",0
"An employee had unstrapped some downhole tools that were brought to a wellsite. While another employee was going to get a forklift, the load shifted and smashed his finger between the load and the rub rail, resulting in a finger amputation.",0
An employee was setting a utility pole when it contacted the field phase of an existing three-phase primary conductor. The employee received an electrical shock and burn.,1
"An employee painting from an A-frame ladder fell approximately 3 to 4 feet to the ground below, injuring his lower back and sustaining a head laceration requiring staples. He was hospitalized.",1
"An employee was having his dump truck loaded by a front end loader. When loading was completed, the employee jumped off the truck to talk to the operator of the front end loader and stumbled onto the dirt between the cab and the loader tires. The employee sustained a knee fracture, a shoulder injury and a forehead abrasion.",1
"On April 30, 2018, at approximately 11:30 a.m., an employee was helping to conduct a prescribed burn on a forest. He set his tool down to use the radio and communicate with others on the burn. When he reached down to pick up the tool, a copperhead snake that was camouflaged by leaves struck him on the right index finger knuckle.",1
An employee was conducting maintenance on a blower fan when the machine started back up after shut down. Moving parts contacted and severed his lift middle and ring fingers.,1
An employee injured his fingers while operating a mixer.,1
"An employee tripped and fell while walking to a collection box, suffering a broken hip.",1
"An employee was winding a coil on a winding machine when he noticed the insulation paper was walking out of alignment. As he was realigning the paper, his left middle fingertip was caught between the coil and the roller, resulting in an amputation.",0
"An employee was painting a wall from a 32-foot extension ladder when the ladder slipped out, causing the employee to fall 14 feet to the ground. The employee suffered hip, pelvic, and humerus fractures.",1
"An employee's right hand went between a UBT roller and a feed conveyor belt while she was cleaning around an automated case packing machine. The conveyor pulled her right arm through up to her armpit, causing cuts and bruising.",1
"At the truck dock area, an employee was finishing up loading a truck with carts of bread when the dock leveler fell on her right foot. The initial injury was a toe fracture that later resulted in an amputation.",1
"An employee's cleaning rag was caught by a piece of equipment's in-going roller, resulting in a right ring finger amputation.",1
An employee fell down the stairs and broke an ankle.,1
"An employee was walking past basketball courts when the employee fell in a hole, twisting and fracturing an ankle.",1
"An employee was standing and giving instructions to other employees when a co-worker slightly bumped a pallet with their hip, causing a double door to fall and hit the employee in the back of the head.",1
"An employee was walking through the shop when she stopped to watch a mechanic doing maintenance on a truck. The mechanic was changing the rear spring axle on the front of the vehicle. The bottle jack was keeping the spring open to pull out the pins. As the mechanic was tapping the pins out, the bottle jack shifted and shot out, hitting the employee and injuring her right cheek.",1
"An employee was cutting wooden forms from a scissor lift when an 8-foot piece of wood form struck his left thumb, amputating it at the first knuckle.",0
"An employee was attempting to open a hatch on a railcar when the employee fell off the railcar to the ground, fracturing the hip and a wrist. The employee was hospitalized.",1
"An employee was cutting a piece of iron pipe with a chop saw when the saw kicked back and lacerated his left cheek, requiring stitches.",1
"An employee was cleaning dishes in the kitchen when she experienced dizziness and double vision, requiring hospitalization.",1
"Employees had placed netting on the ground to capture debris. The injured employee stepped backward over the mesh netting and his foot became caught. He then fell, fracturing his right arm at the elbow.",1
An employee was working on a catalytic converter when he slipped and injured his leg. His leg swelled and the employee was hospitalized.,1
"An employee was helping to install a battery in a powered industrial truck when his left index finger was caught between the battery retention plate and the surrounding area, amputating his fingertip at the nailbed.",0
An employee was unloading a truck when his leg was cut on the hydraulic gate lift.,1
An employee was grinding a weld when the grinding disc broke. The shattered disc then fractured the employee's orbital bone.,1
"An employee was installing shingles from a ladder when the employee fell 20 feet to the ground, fracturing the left wrist and left arm.",1
"A temporary employee was cleaning out the track pad on a milling machine using a wire brush. As he moved the wire brush, his glove became caught in the machine and his arm was pulled into the machine. He fractured his right forearm and was hospitalized.",1
"An employee was retrieving a comfort standing mat under a conveyor when her hair was caught in the conveyor and pulled into a rotating shaft. She suffered hair and skin loss, requiring hospitalization.",1
"An employee was performing a die setup. He was unbolting the die and stepping down from a step stool when he lost his balance. He reached up and grabbed the feed bar and it fell on top of him.  He suffered a broken nose, broken facial bones, and bone fragments in the eye.",1
"On May 1, 2018, an employee's left hand was caught and fractured in a dry roller, requiring hospitalization. The roller was unguarded at the time.",1
"An employee was installing step bolts on a pole while standing on a metal plate that was 28 inches from the ground when the employee slipped and fell, sustaining a laceration injury.",1
An employee was removing a roll from a coating/laminating machine when the machine partially amputated his right thumb.,0
"A temporary employee was showing a coworker how to run a particular job on a machine press. She was attempting to position a part in the point of operation when the machine actuated. Her right hand was then crushed by the machine, requiring hospitalization.",1
"An employee fell to the floor while walking down the hallway, suffering a head injury.",1
An employee was stepping back from a patient's bed when her right femur broke and she fell.,1
"An employee used a forklift to stack pallets on a stack and was backing up when he thought he was going to hit a desk and drove forward instead. The floor had condensate and the forklift skidded into his foot, crushing it between the forklift and an angle iron that was installed on the floor. He suffered a fractured talus bone, requiring hospitalization and surgery.",1
"An employee was aligning an auger with the boom on the back of a utility line truck when his left finger was pinched between the auger and the boom truck, resulting in an amputation.",0
"An employee was moving a scaffold when he slipped on some stones and fell off a retaining wall onto his side, breaking ribs.",1
"An employee was looking out the window with hands placed on the window sill when the window case came down onto the employee's right middle finger, causing a partial amputation.",0
"An employee was cooking in the kitchen when she bumped into another employee and fell to the ground, breaking her arm.",1
"An employee fell to the concrete floor while descending a fixed ladder, requiring hospitalization.",1
"An employee climbed on the back of a pickup truck bed after he finished picking up signs off the side of the road. The driver was driving the pickup truck along the interstate shoulder going eastbound toward the jobsite when the employee fell off the vehicle, striking his head on the ground and requiring hospitalization. He was wearing a hard hat when he fell.",1
"An employee finished rigging and was walking in an area where a crew was loading an exchanger bundle on a trailer when the load shifted, pinning the employee between the active load and an adjacent stationary load. The employee suffered a fractured left femur and pelvis.",1
"An employee was operating a pneumatic shear and pushed a sheet of metal into place on the shear. He was holding the metal as the material hold-downs came down. His right pinky finger slid underneath the fixed guarding on the front of the shear. The shear was actuated via the foot control and his right pinky finger was pinched by the material hold-down, resulting in a fingertip amputation.",0
"An employee was cleaning the top of a vacuum tube cooler when he fell off the top of the vacuum tube and onto the concrete, breaking his knee.",1
"An employee was trying to loosen a pipe with a wrench and a vice stand when the wrench slipped and the employee fell, dislocating and fracturing the right ankle.",1
"An employee slipped and fell on a concrete floor while loading a sandwich rack, fracturing the left hip and requiring hospitalization.",1
"An employee was driving a stand-up forklift and came in contact with another forklift. The employee's foot was caught and fractured between the forklifts, requiring surgery.",1
"An employee was using a core drill to dill holes into a concrete wall when his sweatshirt was caught in the rotating shaft, which then drew his right arm into the shaft. He suffered a compound fracture of the radius and ulna of his right forearm.",1
An employee was adjusting the selector on an elevator when the employee's right leg became caught and lacerated between the elevator cab and a rail bracket.,1
An employee's foot was run over and bruised by a road grader.,1
"An employee fell from a retail counter while attempting to change a light bulb, suffering fractured vertebrae.",1
"An employee was trying to remove an object from the paddled rollers in a machine when the employee's left pinky finger was caught between the rotating rollers, resulting in amputation.",0
An employee was manually helping a production line lead at a capper machine apply caps to bottles of windshield washer fluid when he noticed that a cap had fallen into the machine's chain and sprocket. He was attempting to remove the cap when the chain and sprocket amputated four of his right fingers. The machine was guarded at the time.,0
An employee was returning to her vehicle while delivering mail when she stepped in a pothole and broke her right ankle.,1
"An employee was looking for a connection when he bumped into a 10-pound flow key and it fell on his ring finger, fracturing it.",1
"An employee slipped after stepping off a rebar wall, suffering a fractured bone in the right shin.",1
An employee was setting up a manual kick press when it cycled and amputated the employee's left index fingertip in a pinch point. The pinch point was unguarded at the time.,0
"On May 2, 2018, an employee was observing a crane lift when the load shifted and struck the employee, pinching him between a demolished walkway and existing handrail. He suffered six broken ribs, two broken transverse processes, a lacerated kidney and a lacerated liver, resulting in hospitalization.",1
"An employee was working as a packaging assistant when she tripped and fell, breaking her arm and requiring hospitalization.",1
"An employee slipped and fell down some stairs, suffering an arm injury.",1
"An employee was setting a choker when the line flipped a tree onto him, fracturing his back.",1
"An employee went to unhook a chain attached to metal tubing when the operator raised the load. The employee's right hand was then crushed between the chain and load, resulting in a pinky amputation.",0
"An employee was sharpening a tool on a bench grinder when the tool slipped and he injured his left index fingertip, resulting in a fingertip amputation.",0
"An employee was troubleshooting a feeder's conveyor belt pulley, which was not moving. He was checking the belt's tension when it started to move, catching his right index finger and resulting in an amputation of the first digit. The feeder was not locked out and was unguarded at the time of the incident.",0
"An employee lost balance while operating a vacuum cleaner and fell on her left side, breaking her left hip and requiring hospitalization.",1
An employee was on top of a cooler removing conduit when he struck his head on the ceiling while wearing his hard hat. He was hospitalized with a pinched nerve in his C7 vertebra.,1
"An employee was hand feeding a piece of sheet metal into a roll forming machine when his right hand contacted the rolls, pulling his hand into the machine. Four of his right fingers were partially amputated.",0
An employee was cutting plywood using a table saw when the blade amputated his right pinky finger and lacerated his right ring fingertip.,0
An employee was attempting to remove scrap wood from around a trim saw blade when he sustained a serious cut to the knuckle of his left index finger.,1
An employee was cleaning the trailer community's pool cage with a pressure washer. He was later found on the ground with a bleeding wound to the head. The pressure washer was running and a ladder was lying beside it when the employee was found.,1
"An employee tripped over her foot and fell to the floor while walking down the hall, injuring her head and shoulder. She was hospitalized.",1
"An employee was loading 500 gallon tanks onto his tractor-trailer truck with a crane on the backside of the truck cab. When the employee lifted one of the tanks that he had rigged to the crane, it still had propane in it, causing it to be heavier than expected. The rigged tank bumped another tank next to it that then rolled into the employee on the ground resulting in a broken left leg.",1
An employee was operating a hydraulic machine when it amputated three fingers.,1
"An employee was turning rolls with a roll clamp when one of the rolls shifted. A second employee instinctively tried to keep it upright. The roll then fell on the second employee's left leg, breaking his tibia and fibula.",1
An employee was performing vocational training at a recycling center. The employee was emptying a cart of sorted materials as a customer was backing up their car. The car ran over the employee's left calf and ankle. The employee was hospitalized.,1
"An employee was testing recent repairs to a cooler system when he was electrically shocked, causing him to lose his balance and fall down a flight of stairs. He suffered a head laceration and body trauma, requiring hospitalization.",1
An employee was operating the brake press and amputated the left middle finger.,0
"An employee was standing on a 4-foot step ladder scraping the side of a tank to prepare for painting when he fell off the ladder to the ground, injuring his ribs and back.",1
"While cleaning a meat grinder, an employee's hand entered the discharge tube and contacted the blades. 

The employee suffer amputation of the left index and middle fingertips. The meat grinder was not locked out and was in operation at the time of the incident.",0
An employee ingested a chemical degreasing agent while trying to siphon the chemical into a bucket.,1
"An employee became ill while picking up shrubbery debris from the ground, requiring hospitalization.",1
An employee was attempting to remove a piece of cheese from a cheese slicer when the blade amputated the employee's right middle fingertip.,0
"An employee was pouring material into a vessel containing xylene and butanol when a flash fire occurred, burning the employee's face, ear, and neck.",1
"An employee climbed onto a catwalk in the kill room to get a bird out of the facility. The employee stepped on some foam in the overhead thinking it was a solid floor and fell approximately 18 feet to the floor, suffering a fractured elbow and head contusion.",1
"At approximately 12:50 p.m. on 5/02/2018, an employee was operating a remote control crane in the rolling mill. He and three other mill employees were changing out a mill stand. He had the remote control box for the crane hanging from a strap around his neck. When the stand is slid out of position for removal, an opening to the flume approximately 2' x 5' is exposed until the stands are swapped and a new stand slides into position. While positioning the crane to pick up the entry box, the employee stepped within about 2' of the opening onto a pile of mill scale. Under his weight, the mill scale gave way, causing his feet to slide out from under him. Subsequently, he slid feet first into the flume. He landed on the scale in the flume, a drop of approximately 10"", sustaining broken ribs and a broken shoulder.",1
An employee slammed a thumb in the door of a cutter amputating the tip of his thumb.,0
An employee was part of a crew that was reconstructing an apron in front of a house in a safety work zone when a passenger vehicle entered the work zone and struck the employee. The employee suffered fractures to bones near the right ankle.,1
An employee was assembling a wooden pallet using a pneumatic nail gun when a nail went through the employee's hand. The employee was hospitalized for hand trauma.,1
An employee was rolling up a 2.5 inch hose when their glove was caught by the hose resulting in a broken arm.,1
"An employee was using a horizontal wheel press to push the shaft out of a drum when a 2"" nut  that was being used as a spacer was ejected from between the piston and shaft of the drum. The nut contacted the employee's left bicep, fracturing the humerus.",1
An employee was attempting to clear a jam on an elevator conveyor and caught their hand in the conveyor resulting in soft tissue damage.,1
"An employee fell to the concrete floor while descending a refrigerated truck ladder, suffering a broken left hip, broken left collarbone, and broken rib.",1
"An employee was cleaning out the slag runner on a blast furnace when the employee began to experience muscle cramping in the arms, legs, and back. The employee was hospitalized for dehydration and/or potential heat stress-related symptoms.",1
An employee was disassembling duct work on a press when the blades of the grinder/chopper partially amputated three of his left-hand fingers.,1
"An employee was walking across the parking lot when she slipped on a wet substance and fell, fracturing her left knee and requiring hospitalization.",1
An employee was clearing a jam on a shearing machine when the machine actuated via the foot pedal. The employee's left index finger was in the point of operation and was amputated between the first and second knuckle.,0
"On May 3, 2018, an employee was opening the concrete composite cover of a hand hole with a screwdriver when the cover slipped off the screwdriver and fell on the employee's finger, pinching off the fingertip.",1
"An employee was climbing up a step to access the cab of a semi-truck when the employee slipped and fell to the ground, suffering three broken ribs and a partially deflated lung.",1
"An employee was checking an oil leak underneath a flatbed truck when the flatbed cut his right middle fingertip, resulting in a fingertip amputation.",0
"On May 2, 2018, an employee suffered heat stress after working outside to finish concrete. He was hospitalized.",1
"A load of steel was being moved with a powered industrial truck. An employee was guiding the load while walking down a corridor when he lost his grip on the tagline and attempted to stabilize the load with his hand. The load then pinned his hand against the wall, fracturing it.",1
An employee was loading tools on a truck when his left middle finger was caught and amputated between the truck bed and the bell.,0
"An employee was ascending a set of stairs attached to a flowback tank. The employee placed his hand on the rail between a fixed section of the railing and a removable section of the railing. The railing shifted and his finger was pinched, resulting in a fingertip amputation.",0
"An employee was moving pallets when a heavy pallet landed on and crushed his right middle finger, amputating his fingertip.",0
"An employee was attempting to grab a bad case before it entered a case sealer when he slipped and fell, breaking ribs on his right side.",1
An employee was feeding metal into a power roller when his glove was caught between the roller bars and his left pinky and ring fingers were crushed by the roller bars.,1
"An employee set up an extension ladder in the back of a building near a rooftop unit that needed service. While he was on the ladder a strong gust of wind from an approaching storm caused him and the ladder to fall approximately 10 to 15 feet onto the concrete sidewalk below. He fractured his right ankle and fibula, requiring hospitalization and surgery.",1
"An employee was working on an assembly line, running a non-woven manufacturing machine, when the employee's left hand became caught between two running spindles. The employee's left thumb was amputated, with the possibility of additional left-hand finger amputations. The machine was not powered down or locked out/tagged out at the time of the incident.",1
"An employee was removing a setting tool from the back of a truck when the tool began to fall. As he reached out to try and catch it, his finger was caught between the tool and the truck floor, resulting in a fingertip amputation.",1
"On May 3, 2018, at approximately 4:00 p.m., an employee fell approximately 4 feet from the back of a box truck while delivering vegetable plants to a hardware store. The employee suffered a concussion and was hospitalized.",1
"An employee was conducting weed eating while trimming grass when he was stung by bees, requiring hospitalization.",1
"An employee was standing on the running boards of his delivery truck and cleaning the inside of the windshield when he suffered a medical event and fell backwards to the ground. From the fall, he suffered a fractured skull and bleeding in the brain, requiring hospitalization.",1
"An employee was struck by a vehicle while collecting solid waste on his trash route, requiring hospitalization.",1
An employee was manually turning over a dock plate that was sitting flat on the lifts of a forklift truck in preparation for installation. The dock plate consisted of two metal pieces connected by a hinge. Three of the employee's right-hand fingertips were caught and amputated in the hinge.,0
"An employee was removing a pipe when he lost his balance and twisted his back, causing inflammation to an existing back injury. He was hospitalized.",1
"An employee was loading a scissor lift onto a trailer when the scissor lift came off the left side of the ramp and landed on the employee's leg, breaking it.",1
"Employees were switching railcars when one of the employees was caught between the two cars. He was crushed, suffering internal injuries to his upper abdomen and pelvic area.",1
"An employee was unfolding the fixed ladder on a concrete mixer truck when he lost hold of it as it was being lowered down, causing it to fall quickly. His left index finger was then pinched in the hinge where the ladder unfolds.",1
An employee was using a jointer to shape some wood when his left hand slipped and contacted the tooling/blade. He suffered a partial amputation of his left middle finger and a possible ring fingertip amputation.,0
"An employee was descending an inside interior stairwell when he turned 180 degrees while stepping onto the level surface landing between flights. His left knee twisted and popped out of socket, dislocating his knee and kneecap. He was hospitalized.",1
An employee received an electrical shock while unplugging an extension cord.,1
"An employee was unloading the hot melt glue from a heated reservoir of a glue application machine. He unloaded the unit into a medium-sized cardboard box. The volume of material was about 2 gallons. He then immediately carried the open-top cardboard box outside to the dumpster. He attempted to cleanly throw the box into the dumpster, but the box hit either the edge of the dumpster or something else and bounced back towards him. The hot glue was expelled from the box and landed on both of his bare hands and right bare arm. He suffered second and third degree burns.",1
"On May 3, 2018, after picking up product with a tow-motor, an employee turned the tow-motor to the right and hit a large yellow metal curb. The employee was thrown to the concrete working surface, suffering multiple rib fractures and a possible collapsed lung.",1
"An employee was inventorying products when a forklift struck her, fracturing her left leg.",1
"An employee was checking the tension on the roller chains on the back of a skew roll when his middle finger was caught between the sprocket and roller, lacerating it below the first knuckle.",1
"An employee was under a conveyor using a rag when her gloved right pinky finger was pulled into the conveyor, amputating her fingertip.",0
"An employee was picking up trash bags and was then attempting to climb up the back of a rear load trash truck to clean off the rear view camera when he slipped and fell due to wet conditions, breaking his left arm.",1
"An employee was moving material in a semi-trailer when he lost his balance and fell out of the trailer to the ground, fracturing his right shoulder, arm, and wrist.",1
"An employee was walking on the gangway from a ship to a pier when he tripped and fell, bruising and potentially cracking his ribs. He was hospitalized.",1
"On May 4, 2018, an employee was operating a forklift truck when it ran into a pole in the warehouse, throwing the employee from the truck. The employee suffered a spinal injury and contusion, as well as a herniated neck disc.",1
"An employee was cleaning the crimper edges on a crimper machine with a scraper when the lid of the machine came down on her right middle finger, causing an amputation.",0
"On May 4, 2018, an employee struck the tongue of a shipping container trailer while operating a utility vehicle, suffering two broken ribs and contusions to the mid-torso. The employee was hospitalized.",1
"After driving a forklift to retrieve an empty drum, an employee was found unconscious next to the forklift, which was parked with the forks lowered. He suffered a head laceration, head contusion, and shoulder contusion.",1
"An employee was trying to connect a drive to duct work when it became stuck. He pulled on the drive, which released and knocked his safety glasses out of the way, lacerating his eye. He was hospitalized and had surgery.",1
"An employee was using a printing machine to print boxes when his right hand entered the running machine, amputating his thumb and index finger.",1
"An employee was operating a motorized pallet jack near the dock door. The employee had stopped the jack on the dock slope, then drove down the dock slope to turn around in the parking lot and go back up the dock. During the turn, the employee lost control of the motorized pallet jack and stepped off of it, planting the left foot on the pavement while continuing to hold onto the jack. The employee's foot then twisted, breaking the ankle and the top of the foot.",1
An employee had an allergic reaction to industrial paint and was hospitalized.,1
"An employee fell while stepping down from the bed of a company truck, suffering a possible concussion and requiring hospitalization.",1
"An employee was operating a stand-up forklift when the employee stopped and was struck from behind by a second forklift, suffering a leg injury that required hospitalization.",1
"An employee was driving a forklift into a trailer. Before the employee could get completely in the trailer, the truck pulled forward, causing the forklift to fall sideways between the back of the trailer and the loading dock plate. 
The truck then pulled forward some more, dragging the employee and the forklift. The forklift then fell to the ground on top of the employee, who suffered a fractured pelvis and fractured vertebrae.",1
"An employee was sorting packages off a conveyor belt when he fell approximately 2 feet from a set of steps, breaking his hip.",1
"An employee walked to the front of his double pallet jack and placed his right hand on the throttle and his left on the body of pallet jack with both feet on the ground. When he turned the throttle, the pallet jack ran into his lower left leg, fracturing it.",1
An employee was strapping down the lid on a dumpster when the bungee cord let loose and struck his right eye. The eye became swollen.,1
"An employee was loading a lift onto a flatbed truck when he became pinned by the lift's articulating boom, suffering a left arm fracture, right wrist fracture, scalp laceration, and neck and lower back vertebrae fractures.",1
"A piece of metal fell off of a roof that was being worked on and struck an employee on his left leg, causing a laceration between his ankle and his calf.",1
"On May 4, 2018, an employee started to build a scaffold when the vertical scaffold leg fell and hit the cross braces. The employee's left ring finger was caught between the cross braces and the vertical scaffold leg. His left ring fingertip was amputated (no bone loss).",1
"While working in an elevator shaft, an employee fell from one floor to the next, suffering two broken ribs and lacerations to the head and back.",1
"An employee was opening the window in her office when her foot gave out and she fell to the floor, injuring her hip and requiring surgery.",1
"An employee was using a table saw when a horn sounded, startling him and causing his hand to contact the saw. The tip of his left thumb was amputated.",0
"On 5/4/18, an employee was lowering a die into a wax injection press when his left hand was caught in the die, partially amputating his index fingertip.",0
"On May 4, 2018, an employee was removing timber from a patio when a rusty nail punctured the employee's hand, resulting in an infection that required surgery and hospitalization.",1
"An employee touched a button to open a gate and received an electrical shock to the hand, requiring hospitalization.",1
An employee was offloading crates of glass panels from a truck when a crate fell off the truck and struck the employee.,1
"An employee was installing a device in an AC vent. While resetting the sensor, he installed a screw that hit a power cord underneath it. The voltage was about 220 volts. Two employees received an electric shock, and one was hospitalized.",1
An employee was grabbing onto a crane track while standing on a scaffold when the wheel moved and amputated his left pinky and ring fingers.,0
"An employee was gathering a porta power to slide a piece of equipment into alignment. His finger was resting on a conveyor lip approximately 24 inches below when the porta power fell. He tried to catch it by the hose, which caused it to fall and swing directly onto his left index finger, amputating about 3/4 of an inch of his fingertip.",0
"An employee was unloading steel rods (25 rods to a bundle weighing 2.5 tons total) from a trailer when the rods came loose and rolled over the employee's left leg, breaking the leg and foot.",1
"On May 4, 2018, an employee was carrying a bumper to set it on a conveyor when the bumper slipped and severely lacerated his left cheek.",1
An employee was helping to move an ice sculpture with two other people when the sculpture became imbalanced. He then felt a severe pain in his back. He was hospitalized with a lumbar herniated disc and back pain.,1
An employee received a hand injury that required hospitalization.,1
"An employee was cutting pork loins with a band saw when the blade cut his right index finger, resulting in a partial amputation.",0
An employee was using a crane to lower a coupling box. He was guiding the coupling box onto another coupling box when his right ring finger was caught and amputated between the two coupling boxes.,0
"An employee was standing by a door entrance speaking with another employee  while her hand rested on the door frame near the hinges. Another employee then tried to shut the door, crushing her fingers.",1
"An employee was performing blasting work from an 8-foot step ladder when either his foot or weight shifted, causing him to lose balance and fall to a lower level. He fractured his right leg and was hospitalized.",1
An employee was guiding wire into a spooling machine when a loop in the wire caught and amputated his left thumb.,1
"An employee was going down dock steps when she fell, bruising her head and arms. She was hospitalized.",1
An employee was cleaning a vehicle's valve cover gasket with a needle tool when it stabbed his left hand.,1
"An employee was using a pallet jack to move pallets when his right hand was caught between the pallet jack handle and some racking in the warehouse. His right hand broke, requiring hospitalization.",1
"An employee was using a wire choker to remove sparger tubes when the employee's left ring finger was pinched between the sparger tube and the wire choker, resulting in a fingertip amputation.",0
"An employee was walking through the parking lot when her shoe became caught in a concrete seam. She fell to the concrete, fracturing her hip and hand.",1
"An employee was running new overhead powerlines from a lift when the lift's bucket contacted a pole insulator and moved unexpectedly, throwing him against the side of the bucket and the pole insulator. He strained a back ligament and was hospitalized.",1
"On May 5, 2018, at 11:15 a.m., an employee was using a scissor lift to change light bulbs. The scissor lift was equipped with a platform extending feature that was not properly latched. The platform handrail then moved and amputated the employee's left pinky fingertip.",0
"On Saturday, May 5, 2018, at approximately 11:30 AM, an employee was walking through the side wall department when he walked into a piece of lumber (2X4) that was jutting out from a table. The lumber struck his abdomen. The next day, he experienced abdominal pain and was hospitalized with a ruptured spleen.",1
"An employee was operating a rider hand truck and struck a guardrail and the right side of the hand truck struck an order picker. The employee suffered an oblique fracture to the first phalanx of his foot, requiring hospitalization.",1
"An employee was trying to open a pastillator basket filter (turns resin product into quarter-inch beads) when the pressure built up underneath the filter, causing the liquid resin to splash onto and burn his face and right forearm. He was hospitalized.",1
"An employee was attempting to turn a reach truck left down an aisle but the truck unintentionally turned to the right. The employee was then caught between the truck and the wall, suffering a compound fracture in the left leg with a severe laceration.",1
"An employee's hand was on a dock lever as it was rising when his left middle finger became caught in the lever, resulting in an amputation.",0
An employee was walking into an entryway leading to a construction area when she lost her balance and hit her left arm on the corner of an exterior wall. Her left arm broke and required hospitalization.,1
"An employee was running coils through a sealing machine when the coils stopped going all the way into the sealing area. He was attempting to grab a coil that was not properly in the sealing area when the seal bar came down on his left hand, causing third degree burns.",1
An employee was operating a stand-up powered industrial truck (PIT) when he  collided with a storage rack. His left arm was pinched and broken between the rack and the PIT.,1
"An employee was opening the trunk lid of a theme park car when the car lurched forward. The lid then came down on her right ring finger, resulting in an amputation.",0
"An employee fell approximately 36 to 40 inches off a stool to the ground, fracturing the left upper femur.",1
"An employee was walking to his car when he tripped on a concrete barrier and fell in the parking lot, breaking his right femur.",1
"An employee was startled by a pigeon and fell, fracturing the tibia in both legs and requiring hospitalization.",1
"An employee was pulling a pallet outside when his foot became caught and he fell, breaking his left foot.",1
"An employee was dumping powdered sugar into a portable oscillating blender. A tag was dropped  into the machine. The employee attempted to remove the tag and the blender pulled the employee's left hand between the metal bars and a screen, resulting in two broken fingers. The machine was running at the time.",1
"An employee was sitting in a chair talking with a patient. Wen he stood up he felt back pain, and almost fell twice. He was hospitalized with a back strain.",1
"After loading a truck, an employee pulled away from the dock so that he could swing the trailer doors shut. Upon looking at the load from the ground, he noticed that a pallet at the rear of the load might shift or tip in transit and decided to install a load strap to restrain the product. After installing the strap, he stepped back to inspect his work and fell off the edge of the trailer, fracturing his right tibia.",1
"An employee was removing chickens from a bin. His right hand was resting on the rail next to the bin when the bin moved, catching his right hand between the bin and the rail. His right ring finger broke at the center joint, requiring hospitalization.",1
"An employee was operating a stand-up forklift when the employee's left foot was caught between the forklift and a rack protector, lacerating the foot from a toe to the ankle.",1
An employee suffered a fractured hip after crawling under a conveyor belt to tend to a cello machine at the case packer line.,1
"An employee was observing a machine that was not advancing a plastic sheet correctly and jamming as a result. The employee was checking the tension of the drive belt by depressing the belt with his fingers when the machine unexpectedly advanced the sheet, causing the drive belt to move. When the drive belt moved, the employee's left index finger was caught between the belt and pulley. The employee's left index finger broke at the knuckle near the hand (proximal phalanx) and was lacerated in the same location, damaging the top tendon.",1
"An employee was lifting a client's folded wheelchair into the back of a vehicle when she felt a sharp pain in her lower left back, then felt the pain radiate down her left leg. She suffered a possible muscle strain or pinched nerve.",1
An employee was cutting sections from 4x4x8 cedar board when their hand made contact with the rotating blade. The thumb and left index fingertip were amputated.,1
"While walking through a building that was under construction an employee stepped onto a portion of the floor where the tiling was uneven. The employee lost balance and fell, fracturing the left ankle.",1
"After processing apparel freight in a back room, an employee went to the break room to cool down when her left arm and neck started hurting and she still felt hot. She was hospitalized.",1
An employee was operating a press machine and amputated the right index fingertip.,0
"An employee was testing the humidity in an air handler unit that supplies air to a clinical laboratory. While exiting the air handler, the employee tripped on a 7-inch lip on the step down. The employee fell forward and caught his left index finger between the door and the doorframe, resulting in an amputation of the left index fingertip.",0
"An employee was walking by a door when he tripped on a yellow guardrail and fell to the ground, injuring his ankle.",1
"An employee was standing on top of a tanker truck with a water hose preparing to clean it when the water was turned on. The force of the water caused him to fall from the trailer, fracturing his right hip. The employee's lanyard was not secured at the time of the incident.",1
"While backing away from a delivery truck, an employee stepped onto a box (case) that was stacked behind them. The employee became unstable, lost balance, and fell to the ground, breaking a bone in the bottom of the left foot.",1
"After delivering product at a customer's farm, an employee was driving a feed truck away from the farm when the feed trailer's raised auger came into contact with an electrical line. The employee exited the cab of the truck and came into contact with the electrical current, suffering severe burns. The employee was hospitalized and had surgery.",1
"An employee was on a ladder installing fire alarm wiring in a new construction building when the employee lost balance. The employee reached out to brace themselves and grabbed a metal stud that was part of the framing, suffering a hand laceration.",1
An employee was cutting wood with a radial saw when the wood became caught in the guard. He was trying to remove the wood when his left middle finger was amputated to the middle of the first knuckle.,1
"An employee was deburring a 4x4 inch plate on a sander. When he tilted the plate, the plate went between the sander base and then flipped back and pinched his thumb between it and the sander, amputating his right thumb tip.",0
"An employee was installing lighting over a trim press machine while standing on a ladder. He touched a live wire, fell off the ladder, struck a metal container, and fell to the floor. He injured both shoulders and his knee.",1
An employee slipped on the bathroom floor and fractured her hip.,1
An employee was setting up wooden blocks when the employee's left middle finger was pinched between blocks. The employee was hospitalized with a broken finger.,1
An employee was picking parts from underneath a truck when it shifted and pinned his leg against the ground. He suffered a broken knee and was hospitalized for surgery.,1
An employee received an amputation.,1
An employee was scraping burrito filler from a machine's kettle when the actuation pedal was pressed and released water into the kettle. The injured employee then suffered a middle fingertip amputation.,1
"On May 7, 2018, aluminum pieces 15 to 20 feet in length were being unloaded from a truck. When a PIT operator removed straps from the load, several bundles of aluminum fell and struck an employee from behind. He suffered a broken leg and severe head injury, requiring hospitalization.",1
An employee tripped on the last step while walking down stairs and fell breaking her ankle.,1
"A customer knocked into an employee, who suffered a broken hip and was hospitalized.",1
"An employee filled a propane cylinder on a platform and was uncoupling the hoses when he lost balance and fell approximately 3 feet from the platform, landing on the tongue of a trailer. He dislocated his right shoulder and broke six ribs, requiring hospitalization.",1
An employee was attempting to remove the tube from a knurling machine when the machine pushed the tubing and the employee's hand into a pinch position against the base of the machine. The employee suffered a right middle finger amputation.,0
An employee was giving directions to a forklift operator who was stationary by a dock door as another forklift backed out of a trailer from a different dock door. The second forklift turned sharply to the left and pinned the employee between the two forklifts.,1
"An employee fell approximately 14 feet from a scaffold while installing siding and dislocated a shoulder, requiring hospitalization.",1
"An employee was walking when she slipped on stripper that was on the floor to remove glue and fell, fracturing her left humerus.",1
"While leaving a patient's room, an employee tripped on medical wires and cords and fell, fracturing the right shoulder.",1
An employee was walking out of the building down the stairs when she fell and broke her fibula.,1
"An employee was on a 6-foot ladder while attaching a cable to a residential house soffit. The employee lost balance and fell to the ground, landing on their left side and fracturing a rib.",1
"On May 7, 2018, an employee sustained a fingertip amputation as a result of being caught in a pinch point while assembling snowblower components.",0
"An employee riding on the outside of a waste collection truck fell from the truck while it was in motion, striking his head on the pavement.",1
"An employee was cleaning a car when it accelerated, causing the employee to suffer a shoulder injury and broken jaw.",1
An employee was operating an excavator to drag a swamp mat. The excavator was going around a fallen tree when it pivoted and the weight of the swamp mat caused the excavator to pivot up and down. The employee suffered a pelvic fracture and broken bones.,1
"An employee tripped on a pallet and fell, fracturing a hip.",1
"An employee was using a scissor lift to fill a mold on a rotational molder when the molder moved to the next step of the rotation while the scissor lift was still in its path. The scissor lift was pushed over and the employee suffered a broken right arm and injuries to the right foot, left ring finger, and left middle finger.",1
"Two employees had removed a 50-pound plate from a machine and were preparing to put it back on. An employee lost their grip on the plate, it slipped and caught their finger between the plate and the machine resulting in amputation of the fingertip from the third digit on the left hand.",1
"An employee was stocking milk when his right knee hit shelving. His injury later became infected, requiring hospitalization.",1
An employee was walking down the stairwell when she slipped and fell resulting in hospitalization for injuries to the head and feet.,1
An employee was spraying weed killer from a 4-wheeler when the 4-wheeler's throttle malfunctioned and got stuck. The employee tried to turn the 4-wheeler and fell off resulting in a broken arm.,1
"An employee was troubleshooting the shaker table on a plate machine. As the employee bent over to pick up a screw, the machine was activated catching her hand that had been placed on the table in the shaker table chain resulting in amputation of the right ring fingertip. The machine was unguarded at the time.",0
"On May 8, 2018, an employee was pushing a pallet of water back onto his trailer with a pallet jack at a customer location when he felt pain and a bulge in his abdomen area due to a ruptured hernia.",1
"An employee was cutting steel with a torch on an elevated expressway structure. As he was lighting the torch, he was burned on both ears, the front of his face, and neck.",1
"While changing a tire on a rim, an employee's finger was amputated by the tire changing machine.",1
An employee was standing in front of his powered industrial truck looking over his load when a second employee working in the trailer next to him struck him with a powered industrial truck. He suffered bruises to the right foot and a broken left ankle.,1
"A clamp was pulling a slab from an A-frame and lifting it in the air when it hit other slabs that were resting on safety poles. Five to six quartz slabs then fell from the A-frame and struck an employee, who suffered a fractured left knee and was hospitalized.",1
"An employee was wearing a personal protective equipment belt that holds hoses for an air-supplied hooded respirator when the belt rubbed his side/waist, causing an infection that required hospitalization.",1
"An employee was operating an excavator when it tipped on the edge of the road adjacent to a trench. This caused the employee to fall against the inside of the cab resulting in hospitalization for broken ribs, a punctured lung, and a bruised spleen.",1
An employee was drilling into a pressurized container and the container ruptured. The contents of the container were hot and burned the employee's hand and arms.,1
An employee was walking on a wooden catwalk when the floor gave way resulting in the employee falling approximately 22 feet into a fertilizer bin with material about 5 feet high. The employee sustained a bruised lung and four broken ribs.,1
"An employee fell at the facility and suffered a brain contusion, requiring hospitalization.",1
An employee was grinding a piece of metal and set the grinder down. Their hand made contact with the grinder before it stopped spinning. Two fingers on the left hand were cut.,1
The injured employee was wiping off condensation from a drip pan located above the poultry processing machine. The employee reached his hand above the machine and his hand became wedged between a trolley rail and the machine resulting in a fracture to the employee's right arm and lacerations to the right hand.,1
"While attempting to remove a chicken thigh from a plastic modular belting line, an employee's finger was caught on a section of the belt resulting in amputation of the right middle fingertip.",0
An employee was drilling holes in concrete in cattle pens to build fences when cattle in the area became spooked and started running. The employee rolled out of the way and was found unconscious.,1
"Two employees were transferring rinsate from a chemical tote to frac tanks using a bucket. Approximately six hours later, both employees stated that they felt winded with slightly strained breathing. One of the employees was hospitalized due to strained breathing and low oxygen levels.",1
An employee was operating a pallet jack when he was struck by a powered industrial truck entering the warehouse. He suffered a head laceration.,1
"An employee was verifying the belt tension for a belt-driven fan for conveyor coal unloading. The fan was locked out. While checking the belt tension manually, the employee had his left hand on the belt. The mass of the machine allowed the belt to move despite it being locked out, pulling the injured employee's hand into a pinch point. After pulling his hand out, he required a medical amputation of the left ring fingertip.",0
An employee was running a steel cutting saw. The machine indexed and the employee was caught between the vice cylinder and the machine resulting in a back and leg injury. The machine was unguarded at the time.,1
"While walking beside a skid loader, an employee tripped and fell and his right foot was run over by the skid loader. The employee sustained a fractured ankle and smashed toes.",1
"Two employees were cutting a plaster bulkhead from a scaffold when the cut piece fell and tipped the scaffold over. One of the employees suffered a broken jaw, facial lacerations, and a possible broken leg.",1
"An employee was operating a crane to lift a 4,300-pound bundle that was 24 feet long. The bundle was being raised with one strap of a 8-foot sling; the other strap was snagged on something. As the bundle was raised, it shifted and the employee placed his left hand on the end of the bundle in an attempt to stabilize the load. The bundle moved approximately 31"" and struck another bundle.  The employee's left hand was caught between the two bundles. The middle fingertip was amputated, the ring finger required surgery, and the pinky finger required stitches.",1
An employee's right index finger was caught in a spring-loaded door resulting in amputation of the fingertip.,0
"On May 8, 2018, at 10:30 p.m., a temporary employee was operating a standup powered industrial truck.  When turning at an intersection, the forklift skidded toward the corner of a wall. He attempted to stop the vehicle with his foot, but it was crushed between the truck and wall. His foot/leg suffered multiple fractures, requiring hospitalization and surgery.",1
"Two employees were installing siding from an aluminum plank that was between two step ladders when the plank gave way, allowing them to fall to the ground. One employee sustained a sprained ankle, while the other sustained multiple fractures to his left leg. One employee was hospitalized.",1
"An employee struck a support beam with a forklift truck and suffered internal injuries. He then exited the forklift truck and fell, striking his head on the concrete surface. He suffered neck, back, and head injuries, as well as fractured vertebrae.",1
An employee fell off the wheel chair lift of a van while trying to unload a patient. The employee sustained a broken left tibia.,1
"On May 8, 2018, at approximately 12:10 a.m., employees were running some traded pipes and casing. The crew had a problem connecting two pipes (casing), so they unscrewed those pipes and continued to work with the casing. The injured employee's left hand was on top of an open pipe when a hoist operator (driller) let a second pipe come down. The employee's left-hand fingers were caught between the two pipes (casing), resulting in an amputation of his index finger and a broken ring finger.",1
"On May 9, 2018, an employee was inspecting a machine from an extension ladder when the ladder slipped from underneath the employee. The employee fell 6 feet and dislocated an ankle, requiring hospitalization.",1
"An employee was running a cement mixer when the employee's left hand was caught between the paddles inside the mixer, resulting in the amputation of the employee's middle, ring, and pinky fingers.",1
"An employee was attempting to free an apple that was stuck in an auger when the employee's clothing became caught in the auger. The employee then suffered a left hand amputation at the wrist, broken bones, contusions, and lacerations.",1
"An employee was helping another maintenance employee install a hydraulic cylinder. During installation, the square cylinder base was not fully seated in the slot. The injured employee's finger was pointing to where the cylinder was stuck when the 90-pound cylinder base dropped down and pinched the employee's left index finger, causing a partial fingertip amputation.",0
"An employee was manually flipping an 18"" by 30"" cross head guide that weighed 150 pounds when the part landed on his right hand, crushing his ring and pinky fingers. His pinky finger required stitches and his ring finger was amputated to the first joint.",0
An employee was using a miter saw to cut the end of a wood piece when the saw lacerated the employee's right hand between the thumb and index finger.,1
"An employee was exiting the office through a door and going down steps into the courtyard when she fell as she approached the last step, breaking her left ankle. She was hospitalized and had surgery.",1
"An employee fell 24 feet to the ground while erecting a concrete wall form. The employee suffered a right arm fracture and laceration, pelvic fracture, rib fracture, and vertebra fracture.",1
An employee was working from a ladder using a grinder when he slipped and cut his left forearm.  He was hospitalized and had surgery.,1
An employee became ill after repairing a gas valve in an excavation.,1
An employee suffered a right index fingertip amputation while cutting meat with a meat saw.,0
"An employee was erecting scaffold and fell 15 feet from the top of a mobile scaffold to the pavement below, suffering a chin laceration and broken ribs.",1
"An employee was changing a filter when he fell off his step ladder, possibly breaking his ribs and collarbone.",1
"An employee was overseeing and monitoring the glass manufacturing process at a press machine when he noticed marks (contamination) on a glass pack as it exited the press. He then walked to the entry side, grabbed a paper towel, and attempted to clean the rollers in the press, which was running at the time. His right hand contacted the roller and was pulled into the press. His right hand and part of his forearm were crushed, requiring hospitalization. All required personal protective equipment was worn at the time of the incident.",1
"An employee was troubleshooting the pneumatic plunger under the conveyor belt track of a heat stacker machine when his left index finger was caught by the lift table, causing a fingertip amputation.",0
"An employee was attempting to dislodge a stuck pin in a sheet shackle when the pin engaged after being struck and caught the employee's fingertip, resulting in a fingertip amputation (no bone loss).",0
"An employee was cleaning a furnace when hot iron burned his elbows, knees, and stomach. He was hospitalized.",1
An employee was relighting a residential pilot light when a fire/explosion occurred. The employee was hospitalized with second degree burns to the face and arms.,1
"An employee was standing on a truck lift gate while a forklift operator was removing a tub full of coin. The tub shifted and fell to the side, knocking the employee from the lift gate but trapping his ankle underneath the tub and causing him to hang off the gate for a few seconds. His right lower leg suffered a contusion.",1
"An employee was helping to unload a concrete pole from a pole trailer when it fell onto the employee's leg, breaking it.",1
"An employee was walking across the factory floor when he slipped and fell, breaking a hip.",1
"A maintenance employee was walking between buildings during his shift when he tripped on the curb and fell, breaking his upper left leg.",1
An employee was prepping a part for painting with an abrasive blaster when he lost control of the blaster and the blasting media contacted his left forearm. Sand was used as the abrasive media.,1
"An employee was cleaning and trying to move a bench when he tripped over a rug behind him and fell to the floor, breaking his hip. He was hospitalized.",1
An employee was using a saw to cut a piece of wood when the blade amputated the employee's left index fingertip. The saw was unguarded at the time.,0
"An employee was working on a refractory dry-out project using a gas-fired heating method. During the process of lighting one of the burners, the bulkhead blew out. The employee suffered second degree burns to the face and hands, first degree burns to the throat and lungs, broken ribs, and a collapsed lung.",1
"An employee was on a scaffold removing duct from overhead when the employee lost balance and fell 4 feet to the floor, suffering a broken hip.",1
An employee had an allergic reaction to a latex balloon and was hospitalized.,1
"On May 9, 2018, at 1:17 p.m., an employee was operating a forklift and struck another forklift. His left thumb was caught between the lifts, resulting in a fractured thumb/thumb joint. He was hospitalized.",1
An employee was operating a tractor to apply grass seed to a golf course. He then went behind the tractor to the seeder. The tractor rolled backwards and crushed him.,1
An employee was reaching into a blow molding machine when he struck his head on the interlock guarding device and collapsed. He lost consciousness.,1
An employee fell from an extension ladder and was hospitalized.,1
"An employee was trying to pull off the bottom side of a drain hose on a corn flaker to see if it was plugged when the top side of the drain hose came off and hot water was dumped onto the employee. The employee suffered burns to the neck, arms, and stomach.",1
"An employee was attempting to enter a pick-up when he lost his footing, fell, and struck his right side flank on the side step of the vehicle. He suffered a right kidney contusion and hematuria.",1
"Two employees were running a test on a prototype tankless water heater that ran on natural gas when the unit started to overheat. The carbon monoxide alarm sounded and the employees evacuated the room, but one employee was exposed to the gas and required hospitalization.",1
"While tracking a group of individuals, an employee experienced difficulty breathing, pain in his right shoulder, and black-out sensations.",1
An employee's pinky finger was crushed between two snow plow push frames that fell onto each other when the employee touched them to see if they were dry.,0
"On Wednesday, May 9, 2018, at approximately 11:15 a.m., an employee was removing transite panels on a construction site when he lost his balance and fell 4.5 feet to the ground. His left ankle struck a small pile of brick rubble. He was hospitalized with a possible broken ankle and abrasions to the left forearm. A lanyard was not connected at the time of the incident.",1
"On May 10, 2018, an employee felt a pop in the abdomen while lifting a 50-pound coil. The employee was hospitalized with pain and nausea.",1
"An employee was in a bucket connecting parts on a pole when a wire in the employee's left hand touched something and caused an arc flash (7,200 volts), burning the top and palm of the employee's hand.",1
"An employee was struck by a sit-down forklift mast while walking out of an office, suffering a fractured metatarsal.",1
"An employee was reattaching a telephone wire to a residential home when the ladder he was working from slipped out and caused him to fall approximately 8 to 10 feet to the ground. He sustained bruising, three broken ribs, a laceration to his forehead, and a sore thumb.",1
An employee was working in a 4-foot-deep excavation applying epoxy to welds when the employee became ill with heat cramps. The employee was hospitalized for heat exposure.,1
"An employee was on the loading dock, loading a trailer. He climbed onto the trailer-door track-guard at the rear of the trailer to reach and strap freight, securing it in the trailer. He slipped off the door-track guard and fell into the gap between the trailer and dock, sustaining multiple fractures to his right ankle.",1
An employee was adjusting a road case near a column when her right index finger was crushed between the road case and a thermostat.,1
"An employee was struck from behind by shoplifters as he was walking to the restroom. He suffered bruises, scratches, and a sprained knee, requiring hospitalization.",1
"While walking from the job site to a truck, an employee slipped and tripped on the curbside. The employee suffered a broken left ankle and was hospitalized.",1
"An employee was servicing rooftop HVAC units and turning off a water valve when he was attacked by bees or wasps. As he tried to swat and move away from them, he fell approximately 13 feet from the roof to the ground.",1
"An employee became overheated while cleaning an oven, requiring hospitalization.",1
"On May 10, 2018, an employee was hospitalized after tripping on a box that was on the floor.",1
"An employee was opening the door to a car that was on a flat bed truck for recycling when the door fell and struck the employee's left middle finger, amputating it.",0
"An employee was manually guiding valve stacks into place when the employee's left index finger was pinched, resulting in an amputation.",0
"An employee on a work over rig went to the rig platform to relieve the rig operator.  Wind was blowing very hard (30 to 40 mph) with gusts. An umbrella was attached to a handrail to protect employees from elements and blowing dust. The employee was adjusting the umbrella when a strong gust blew him off of the rig platform. The gust carried the umbrella, the 4-5 foot handrail, and the employee over the edge. He fell approximately 15 feet to the ground, breaking his femur.",1
An employee suffered partial scalping when their hair was caught in a moving shaft while cleaning around the seed treating equipment.,1
An employee was plugging a gantry crane into an outlet when it arced and caused him to fly back a couple of feet. He was unresponsive for about 10 to 15 seconds. The electricity had entered his right hand and exited his left hand. He was hospitalized.,1
"An employee was using a pallet jack configured to haul roll tainting equipment. He backed up the equipment and switched it to coast pro mode, then walked between the coasting pallet jack and a rack. His ankle was caught and fractured between the jack and the rack.",1
An employee experienced a stroke while moving boxes off a pallet and onto a table.,1
"On May 10, 2018, at 5:40 p.m., several employees were attempting to remove a machine from a semi trailer. The machine was returned by a customer and had not been crated. The employees used a forklift and lifting straps to move the machine. The machine tipped, pinning one employee against the wall of the facility. The employee suffered a broken ankle and cracked rib, as well as a possible concussion.",1
An employee was attempting to change a truck trailer tire and was pinned by the bumper of the trailer. The employee suffered severe bruising and was hospitalized.,1
An employee was using a table saw to cut wood for a TV set prop. He was guiding the wood through the saw with his left hand when the saw amputated his left index fingertip. The saw was unguarded at the time.,0
"An employee was setting trusses at a building when he slipped and fell 5 to 8 feet, dislocating his ankle. Fall protection was worn at the time of the incident.",1
An employee was cutting the bolt on the back of a truck to repair it when the lift gate fell on the employee's left thumb and index finger. The employee sustained a small laceration on the index finger and was hospitalized for surgery.,1
"An employee was installing a box behind a stack of drywall when the drywall fell on his legs, fracturing them and requiring hospitalization.",1
"An employee was fitting a welding key into a slot to join two pieces of iron that were on a work table. The key did not fit properly so he removed it to investigate. His finger was in the key slot when one of the pieces of iron shifted, resulting in the amputation his left middle fingertip.",0
"An employee was holding a piece of looped carbon fiber thread when his left index finger became tangled in the loop as it was entering a pre-carbonizer. As he removed his finger from the loop, his left index finger was amputated.",1
An employee fell off his extension ladder while installing a cable line to a residence.,1
"An employee was operating a receiving conveyor line when it stopped. The employee removed a label that covered a photo eye and the conveyor started to run again. The employee's right hand was then caught between the conveyor belt and a roller, causing contusions, swelling, and skin removal.  The employee was hospitalized.",1
A trench collapsed with one employee in the work area.,1
"An employee was on the fourth step of an 8-foot ladder removing a piece of HVAC duct work from the ceiling while a coworker supported the duct work from the floor. The coworker lost control of the duct work and it swung down and knocked over the ladder, causing the employee to fall to the ground. The employee suffered a fractured right scapula, fractured right clavicle, and seven fractured ribs.",1
"An employee was taking a pin from a heavy duty jack stand to use on another jack stand. As another employee removed the pin, the lift dropped and caught the injured employee's fingertip in the adjustment holes in the stand, resulting in a fingertip amputation.",0
An employee was hospitalized due to a splinter received while sanding a hardwood floor.,1
"An employee was cutting a tree off of a communication line when the tree snapped and the tension on the line flipped the tree/limb back onto the employee, striking his forearm and fracturing a bone.",1
An employee was troubleshooting a laser cutting table when it indexed/articulated and knocked him to the floor. He suffered a back injury.,1
"An employee was working on a forklift propane tank leak when the fuel ignited. The employee received burns to the arms, torso and face, requiring hospitalization.",1
"An employee was pulling a pallet down from a rack with a reach truck. He reached up to adjust a light with his left hand while his right hand was on the joy stick. He unintentionally pulled back on the joy stick and the truck went backward, catching his left hand between the rack and beam behind him. His left pinky finger was amputated.",0
"An employee was operating a hydraulic pump when his left pinky fingertip was smashed in the valve, resulting in an amputation.",0
"An employee fell in the parking lot, sustaining two fractured elbows and a laceration to the forehead.",1
An employee was removing the bagging device from a lawn mower when his fingers contacted the spinning blades and were amputated.,0
An employee was using an air nailer to perform framing work when the nailer shot a nail into his chest.,1
"An employee was performing maintenance on a press when the employee's hand touched the two-hand trip. The press then cycled while the employee's hand was in the point of operation, amputating a finger.",0
"Three employees were manually offloading a steel H-brace from a utility trailer. As the crew was attempting to push the brace away from the trailer, the brace slid down and struck one employee across both knees. The employee suffered a fracture to the left knee and a 4-inch laceration above the left knee.",1
"An employee was moving a disc with a hoist when the disc fell on and fractured his foot, requiring hospitalization.",1
"An employee was ripping and cutting sheeter sidings (a piece of wood) on a table saw when he attempted to flick a piece of wood out of the table saw area. His hand was then caught on the saw blade, amputating his index and ring fingers.",0
"An employee placed a cover in a welder and hit the two-hand control. The cover was not situated correctly. As the employee attempted to adjust it, the welder amputated the employee's right index fingertip.",0
"An employee was opening a box storage trailer when two large bundles of cardboard boxes fell out and hit the employee in the head, knocking him to the ground. He was hospitalized with a head injury.",1
"An employee wrapped a rope around a truck crane outrigger leg to use as an anchor to lower a large jack from a steel utility pole. The rope was wrapped once around the outrigger leg and when the jack started lowering from the utility pole, the rope let out quickly and knocked the employee off their feet falling onto the ground. The employee suffered a fractured right hip and left scapula.",1
The employee was performing repairs on a fire truck while the truck's cab was being held up in a tilted position by a safety latch. The pivot point on the cab broke and released the cab lock. The cab fell from its tilted position and the employee was crushed between the engine and cab frame. The employee sustained severe head trauma.,1
An employee was operating an off-road vehicle when he lost control of the vehicle and it rolled. He suffered a broken left radial bone and a fractured left foot.,1
An employee was moving product with a forklift when he lost control of the load (pallet) and it struck a second employee on the left leg. The injured employee suffered multiple fractures to her left leg.,1
"An employee was guiding another employee who was driving a car into the bay. The car accelerated, striking and pinning the employee between the car and the tire machine. The employee suffered a severe laceration to the right leg.",1
"An employee was walking to a cardboard baler with a cardboard box in his hands when he tripped and fell, fracturing his femur and hip.",1
"An employee was going to work carrying multiple bags and a newspaper.  She was using her right arm to open the front door to enter the lobby when she lost her grip on the door, lost her balance, and then fell. She suffered a displaced right distal radius fracture with posttraumatic carpal tunnel syndrome.",1
"An employee drove a road-rail material handling truck to a fabrication business/shop to transport a rail cart. The road-rail truck was equipped with a boom lift, and the employee sat in the boom operator seat and used the boom to lift the rail cart off the truck. While lifting the rail cart off the road-rail truck, the boom over-extended, which caused the road-rail truck to lean. The rail cart then fell off the boom, causing the road-rail truck to rock and the employee to fall out of the boom operator seat to the ground below. The employee suffered a broken left elbow, broken right knee, and minor brain and liver bleeding, which required hospitalization. A seat belt was not worn at the time.",1
"An employee was hydro blasting a vertical pipe with a lancer to unclog the pipe.  When the material that was clogging the pipe broke free, it knocked the lancer out of the pipe. The employee was then hit on the left arm by the lancer water pressure, suffering a laceration.",1
"An employee was descending a 20-foot extension ladder that was secured at the top and had an employee holding it at the bottom. The employee missed a step and fell down the ladder while holding onto the side bars. The employee hit the ground, fracturing the left leg and both ankles.",1
"On May 11, 2018, an employee was helping another employee load panels onto a CNC router. He had just placed two panels on the vacuum work station when his right hand entered the running tool cutter, amputating his middle and ring fingers. The tool cutter was guarded at the time.",0
"An employee was operating a lift truck (sit down rider forklift) when his lower left leg was caught between the truck and a railroad wheel. His lower left leg broke, requiring hospitalization.",1
An employee was sanding a part on a lathe when his right index finger became caught and amputated in a hole on the rotating part.,0
An employee was performing maintenance on a machine when the machine cycled and amputated the left index fingertip.,0
"An employee tripped over a bench and fell to the floor, breaking an arm and requiring surgery.",1
"An employee was watching a 30-foot belt sander when the grinder belt got in a bind, causing the motor stand to tip over and catch the employee's hand between the stand and a rail. The employee's right hand was crushed, requiring hospitalization.",1
An employee suffered a heart attack while laying water line pipe at a construction project.,1
"An employee climbed onto a sweeper truck to replace the lid on the water tank. The employee slipped on the wet surface and fell approximately 4 feet to the ground, suffering a spinal fracture.",1
"On 5/11/2018, an employee was signing a truck call ticket when a truck driver struck and ran over his feet. He suffered fractures to both feet as well as his tibia and fibula. He was hospitalized.",1
"An employee was working on a vice that was not cranking down, so the employee tried to push down on the side of the vice. The vice let loose and the employee's right pinky was crushed between the anvil side and the mechanical side of the vice. The employee eventually required a medical amputation of the fingertip.",0
An employee tripped over a box and fell fracturing the left elbow and forearm.,1
An employee was about to change a damaged belt in the air handler unit on the roof when his glove was caught in the moving belt resulting in a partial amputation of the right index fingertip.,0
"Two employees were using a mechanical lift to lift a resident from a bed.  As the resident was being lifted, he started thrashing and the lift tilted. The employees tried to hold the lift and one of them suffered a strained back, while the other was hit by the lift frame and suffered a broken right leg.",1
"An employee was walking down stairs when she slipped and fell, fracturing her right medial malleolus.",1
"On 5/12/2018, an employee tripped over an equipment cord while assisting a patient in the emergency room. The employee fell to the ground and broke a leg, requiring hospitalization.",1
"An employee went outside to investigate the cause of some noise and commotion. An assailant was going through the neighborhood on a crime spree with a baseball bat and struck the employee. The employee suffered head and facial trauma, requiring hospitalization.",1
An employee was operating a machine when two of the employee's fingers were caught in a rotating roller. The employee broke a thumb and required stitches.,1
"An employee was installing painter's tape around a window while standing about 12 feet up on a 24-foot extension ladder. After he finished the installation, he was descending when he slipped and fell about 8 feet onto the sandy ground below, resulting in a micro-fissure fracture on his L-2 vertebra. He was hospitalized.",1
"On May 12, 2018, at approximately 9:30 a.m., an employee and a coworker were responding to a motor vehicle accident that had caused a down power line. He ducked below the downed powerline to provide assistance to the injured victims. His forehead then made contact with the energized power line, and an electric current entered his forehead and existed his foot. He was hospitalized.",1
"On May 12, 2018, at 10:30 a.m., an employee used a chair with wheels as a step ladder to hang a wall decoration. The chair inadvertently rolled, causing the employee to fall to the floor. The employee fractured the front and back of the left leg and the left knee, requiring surgery and hospitalization.",1
"An employee was helping a coworker repair an aircraft tire. He removed a tire from a cart and leaned it against the cart to ready it for installation. The tire then fell onto his lower left leg, breaking it.",1
"An employee was ripping off shingles from a single-story residential re-roofing project when the employee stepped on a piece of loose felt and slipped from the roof, falling to the ground and injuring the right elbow.",1
"An employee was preparing hamburgers on a portable grill when a fire broke out, causing propane tanks to explode. He received first degree burns to his hands, a head injury, and possible smoke inhalation.",1
"An employee was driving down a lease road when the employee struck a rock in the road, over-corrected, and ran off the road, striking larger rocks that set the airbag off. The employee suffered a possible concussion.",1
"An employee fell from a 6-foot scaffold while removing a temporary wall, suffering a fractured pelvis, knee injury, and concussion.",1
"An employee fell approximately 30 feet onto the driveway of a gated garage. He was then struck and run over by a car, sustaining femur and jaw injuries, loss of teeth, and a collapsed lung.",1
"On 5/13/2018, an employee was attempting to clear a jam on an overhead bread cooler conveyor when the moving parts amputated the employee's right index and middle fingers. The conveyor was unguarded and was not locked/tagged out at the time.",0
An employee was attempting to chase down a customer's runaway vehicle in the parking lot when the vehicle ran over the employee. The employee suffered leg and pelvic fractures.,1
An employee was opening the forks of a forklift to pick up a bag of casing protectors when his left ring fingertip was partially amputated between the fork and the forklift carriage. Impact gloves were worn at the time of the incident.,0
"An employee stepped onto PVC pipe flanges to view the water level in a tank when the pipe flanges broke under the pressure of his feet, causing him to fall. He broke his jaw and lacerated the right side of his face, requiring hospitalization.",1
An employee was operating a cash register at a grocery store checkout lane when she chased after a non-paying customer and slipped and fell on an entranceway rug. She broke her hip and was hospitalized.,1
"An employee was changing the blade on his safety cutter when the blade lacerated his right index fingertip, resulting in the amputation of a small portion of the skin on his fingertip.",0
"An employee was cleaning a hopper when it activated while the employee's hand was inside, causing a finger amputation.",0
An employee was using medicated shampoo to bathe a dog with a lot of ticks when the employee became ill with nausea and dizziness. The employee was hospitalized.,1
"An employee was cutting wood on a table saw when the wood became bound up in the saw, pulling the employee's left hand into the blade. The employee's hand and fingers were cut.",1
Employee lost part of thumb in machine.,0
"On May 14, 2018, an employee was working on a sheet metal roof and started to experience symptoms related to heat illness. The employee was admitted to the hospital for heat exhaustion and dehydration.",1
An employee fell from a ladder while servicing a residence and broke his humerus.,1
"On 05/14/2018, at approximately 2:45 PM, an employee was working from a 12-foot fiberglass A-frame step ladder. The employee was using a drill to install conduit for a junction box when he fell 8-9 feet from the ladder onto the concrete floor below, fracturing his right/left wrists and lacerating his face above the left eye. He was hospitalized for surgery and stitches. Proper PPE was worn at the time.",1
"An employee was taking a work capacity test that required the employee to walk 3 miles on flat terrain with a 45-pound vest in 46 minutes or less. At the end of the test, the employee experienced cramps and then lost consciousness, requiring hospitalization for heat exhaustion.",1
"An employee was using a ladder to enter and clean a liquid fertilizer tank when he fell. He sustained a cracked skull, broken ribs, and bruised organs, requiring hospitalization.",1
"An employee was walking in his working area when he slipped on mud and fell, injuring his leg.",1
"On May 12, 2018, an employee was stepping off the side platform on the passenger side of a yard truck when his right leg struck against the metal step, fracturing his tibia. He was hospitalized.",1
"An employee was walking with a mini-excavator that was carrying a sewer vault in a marked construction zone on a public roadway. A privately owned vehicle sped through the zone, causing the employee to step sideways into the path of the mini-excavator. The mini-excavator then struck and broke his leg.",1
An employee became dizzy and overheated while delivering mail.,1
Two employees were moving and tilting a large steel beam when it suddenly fell over and struck the injured employee's right and left shins. He was hospitalized and had surgery.,1
"An employee was lowering a fiber optic cable while working on a scaffold when a bus ran and hooked the cable, causing the scaffold to topple. The employee fell onto an air conditioning unit below.",1
An employee was removing waste nylon from a winding machine when the nylon became caught on the moving spindle. The nylon then amputated the employee's left middle finger.,0
"An employee was riding on an all-terrain vehicle off road when the vehicle overturned. The employee sustained a head injury, damage to the C-4 vertebra, and a cracked rib, requiring hospitalization.",1
"The employee was stripping some forms using a crowbar when the crowbar slipped, causing him to lose his balance. He then put all his weight down on his right foot and rolled his ankle. His ankle suffered a fracture and required surgery.",1
An employee was working outside and became ill later that evening. He was admitted for possible heat exhaustion.,1
"An employee was using a forklift to unload a trailer of pulp material when the forklift struck a dock plate as he was backing out of the trailer. The forklift abruptly stopped, which caused the employee to suffer neck and back injuries.",1
"An employee was walking through a door when strong winds grabbed the door and slammed it into her left hand, partially severing her left pinky finger. She was hospitalized and had surgery.",1
"An employee was checking a side puller to see whether a contractor had sanitized it when the machine actuated while his hand was inside. His left hand was caught in the side puller, amputating portions of his index, middle, and ring fingers. The side puller was not locked/tagged out at the time of the incident.",0
"An employee was guiding yarn into machine rollers when the rollers pulled his right hand into the machine, crushing his fingers. The machine also released steam that burned his fingers and right forearm. The rollers were unguarded at the time.",1
An employee slipped while walking behind a counter after another employee had previously mopped the floor. She fell to the floor and fractured her wrist.,1
"While driving a forklift, and employee was caught between a metal rail and the rear of the forklift. The employee's left foot was crushed and broken.",1
An employee was walking backward with a wheelbarrow and as he transitioned between surfaces he slipped and fell onto his back and right side. He fractured five ribs and was hospitalized.,1
An employee was delivering mail to a residence when two dogs became loose and mauled the employee's fingers. The employee's right middle finger had to be medically amputated.,1
An employee was talking to a forklift driver when the forklift reversed and struck the employee. The employee sustained a right ankle/foot injury that required hospitalization.,1
"On 5/14/2018, an employee was reversing a PIV when it struck another PIV that had its forks raised. The forks struck the employee, who suffered broken ribs, a collapsed lung, and lacerations. The employee was hospitalized.",1
"An employee was operating a vertical splitter to split logs and was holding the log on the top. As he depressed the foot pedal, the blades came down and amputated a portion of his right index finger.",0
"An employee was pouring concrete when the concrete pump truck struck and knocked him to the ground, bruising his ribs. He was hospitalized.",1
An employee was performing a change over on a machine when the machine cycled and amputated one of her fingertips. The machine was guarded at the time.,0
"On May 14, 2018, an employee was manually moving a laundry trolley system and became caught and crushed between the system and the trolley. The employee suffered abrasions to the legs and was hospitalized.",1
"An employee was unloading a cart of ice cream from a truck when the cart started to roll off the hydraulic truck lift. The employee attempted to stop the cart but was injured, suffering a fractured hip and lacerations to the head and elbow.",1
"An employee was driving a beverage cart around a golf course when a drawer on the cart opened and became caught on a fence, causing the driver to be thrown from the cart and the cart to flip. The beverage cart landed on top of the employee, who suffered two pelvic fractures.",1
An employee was upending a transformer that was on a skid when the employee's left fourth fingertip was pinched and partially amputated between a runner and the skid.,0
"An employee tripped over a piece of plastic in a warehouse and fell to the floor, sustaining a broken hip.",1
"An employee was working on a strand pack (a frame that holds cable in place) and attempting to remove a section of cable when his fingertip was caught in the cable windings, resulting in a partial right index fingertip amputation.",1
"On May 14, 2018, an employee was attempting to clear material from a mower vacuum when the blades amputated his thumb and several fingers on his left hand. The mower blades were running at the time of the incident.",1
An employee was operating a jointer/lathe when a small strand from his protective gloves became caught in the machine. The small strand forced his right index finger into the blade of the rotary spindle and he sustained a partial amputation to his right index fingertip.,0
"At around 10 a.m., on 5/14/2018, an employee was weed-eating in a shipyard when he experienced a headache, dizziness, and cramps. He was hospitalized due to dehydration and low sodium levels.",1
"An employee was moving a steel beam with an overhead crane when the crane's pin (clip) broke and the beam fell, hitting the employee on the head and right hip. He was hospitalized for a concussion and leg contusion.",1
"On May 14, 2018, an employee was helping a co-worker load a compressor onto a truck when he was caught between the compressor and the truck frame, fracturing his pelvis.",1
An employee was preparing to spool a bucket truck line with an electric winch when the employee's right thumb was caught and smashed in the winch.,1
"An employee was preparing to set a carrier hydraulic cylinder in place. His finger was in the retaining pin hole slot checking the alignment when the hydraulic cylinder was set in place, amputating his fingertip.",1
"On 5/14/2018, an employee fell off a roof to the ground that was approximately 16 feet high, breaking both ankles and requiring hospitalization.",1
"An employee was moving a mirror when it cracked and lacerated his forearm, severing a tendon and causing nerve and arterial damage. He was hospitalized and had surgery.",1
An employee was cutting a piece of meat with a knife and amputated the left ring fingertip.,0
An employee was operating a polishing wheel and amputated a fingertip.,0
Two employees were changing the filter in the parts washer. The injured employee was lifting the metal basket out of the housing with another employee. It slipped out of the second employee's hands landing on the pinky finger of the injured employee. The finger was amputated.,0
"An employee was using a boom lift to unload equipment from a flatbed truck when the turntable of the boom turned around 180 degrees with the bucket remaining on the trailer. He drove the boom toward the end of the trailer and before he could stop, the front wheels went off the back of the trailer. He was thrown off the lift and landed on the street, fracturing his right wrist and right hip. He also sustained a laceration to the right side of his face.",1
"An employee was helping another employee lower a lift gate on a truck. His left hand was on the edge of the lift gate when the latching mechanism closed, catching his left pinky fingertip and resulting in an amputation.",0
"An employee struck a support pole in the warehouse while driving a forklift, suffering a head laceration and potential bone fragmentation. He was hospitalized.",1
An employee was checking the tong heads on some tubing tongs when the tongs engaged and amputated the first digit of the employee's left index finger.,0
"On May 15, 2018, an employee fell approximately 15 feet while accessing a cargo ship, suffering a head injury, multiple facial fractures, mandible fractures, a left elbow fracture, and a soft tissue injury and laceration to the left ankle/foot. The employee was hospitalized.",1
"An employee was operating a 1,250-ton press brake to bend parts. As a part was being bent by the press dies, it swung up toward the face of the ram. The employee was still holding the part, and his right middle and ring fingertips were then pinched and amputated between the part and the front of the machine.",0
An employee's sleeve became caught in an auger that he was using to drill holes for fence posts. He suffered an arm fracture.,1
"An employee was pressure testing a fuel tank and void tank on a boat. Liquid was coming out of the pot into the test hose when the T-bar hatch blew off, striking the employee in the left knee and face and knocking him onto his back. He suffered a fractured tibia and broken nose.",1
A maintenance employee sustained an amputation while cleaning a meat pump.,0
"An employee was loading a box truck. He was sitting on a stack of 20 doors (each door was 1 inch thick) that had been wrapped and stacked onto a 4-inch-high pallet and was in the bed of the truck. He then fell off the stack of doors and onto the truck bed (a distance of about 24 inches), fracturing his left femur and left wrist.",1
"An employee was disconnecting gauges from a condenser when a valve failed to close, releasing refrigerant from the system. The employee attempted to shut the valve with a wrench and was exposed to refrigerant, receiving a chemical burn to the right hand.",1
An employee was walking to his truck at a remote site when his knee gave out due to a torn or dislocated tendon. He was hospitalized for surgery.,1
"While inspecting a residential roof for damage, an employee fell approximately 12 feet from the third floor to the second floor roof. The employee suffered cracked ribs, a punctured lung, and a possible back fracture.",1
"An employee fell from a ladder to the concrete below, landing on his back. He sustained a head laceration and fractured vertebrae in the back.",1
"An employee had conducted landscaping, including rototilling, hand raking, and planting, at a work site. Around 4:30 PM, he was riding in the company truck to leave the work site when he felt ill, lightheaded, and dizzy. He was hospitalized for heat exhaustion.",1
"On May 15, 2018, at about 4:40 p.m., two employees were using a forklift to transport a frac tank onto a flatbed trailer. The tank was placed on a metal plate positioned on the forks of the forklift. During transport, the frac tank and metal plate shifted, striking the two employees. One employee sustained two fractured knuckles to the left hand, requiring hospitalization.",1
"An employee was performing janitorial services in a bathroom when she slipped and fell, breaking her clavicle.",1
"An employee was operating a hydraulic pallet lift conveyor to remove cans of tomatoes from a pallet. His leg was between the pallet lift conveyor and a guardrail when the hydraulic control was pressed, causing the pallet conveyor to rise and squeeze his right leg between the pallet and guardrail. His right leg broke.",1
"An employee drove a tractor to a paint load station, stood up, and was about to begin sanding an area of the tractor when the employee tripped and fell approximately 2 feet to the tractor tracks, before rolling and falling approximately 4 more feet to the concrete below. The employee was hospitalized.",1
"While operating a stand-up forklift, an employee was struck by another forklift operator who was traveling in reverse. The employee suffered an open left foot fracture.",1
"An employee tripped on a floor transition strip and fell while carrying mail, suffering a compression fracture.",1
"An employee's finger was smashed between a gate latch and a pipe on a cattle pen, requiring a partial surgical amputation.",0
"An employee was walking to a linen cart to get towels when she lost her balance and fell, striking her head on the floor.",1
"An employee was working on a two-story condo unit's roof area when he slipped and fell from the roof, hitting an air conditioning unit before hitting the ground. He sustained fractures to his left-side ribs.",1
"On 5/14/2018, a temporary employee was walking through a warehouse when his phone was knocked out of his hand. As he reached to pick up his phone, a powered industrial vehicle backed over his left foot, breaking it and requiring surgery. Steel toe shoes were worn at the time of the incident.",1
"An employee was cleaning underneath a conveyor belt with a rag when the employee's right arm was pulled in by the conveyor belt, breaking two bones in the right hand.",1
"An employee was using a hand held drill to mix concrete when he noticed the mixing pedal was coming loose. He tried to tighten it and his left glove became caught in the mixer, which then amputated his left pinky. The mixer was running at the time.",0
"An employee operated a forklift to transport a hopper outside in order to empty the hopper contents into a dumpster. The employee got off the forklift and tried to move down the manual lever that causes the hopper to empty, but the lever was tight. When the employee finally got the lever to go down, the hopper shifted and caught the employee's hand between the hopper and a forklift fork, resulting in the amputation of the employee's left middle finger at the first knuckle.",0
"On May 15, 2018, at approximately 9:15 p.m., an employee was moving an empty, non-motorized dolly on an air ramp when the dolly struck her knee, fracturing it and requiring surgery.",1
An employee was unloading a mower from a trailer when he suddenly fainted. His head hit the concrete and his left leg slid under the mower stand and was scraped. He was hospitalized.,1
"An employee was removing a clamp at a joint in a stainless steel water line that was diluted with peracetic acid when the acid contacted the employee, who received second degree burns to the left shoulder, left chest, and neck, as well as eye and chest irritation.",1
"An employee's fingers were inside a machine when a second employee activated the two-hand controls, powering the machine's hock cutter. The hock cutter then amputated the employee's fingers.",1
"An employee was preparing girder #2 to be raised from the ground and put in position with girder #1. He was standing on top of girder #2, which was approximately 9 feet high, when girder #1 rolled over and fell. He heard the noise and jumped from girder #2 to avoid being struck. He fell and hit his head, suffering a left eye bruise and multiple facial fractures.",1
"An employee was helping another employee carry an abandoned couch out to the dumpster when he stepped off the curb backwards and broke his ankle, requiring surgery.",1
"While walking alongside an excavator, an employee tripped on a curb. The employee's left ankle was run over by the excavator track, breaking bones above the ankle and in the foot.",1
An employee was climbing onto the operator's seat of a digger derrick when he lost his balance and fell backwards 6 to 8 feet to the ground. He suffered a lower back compression fracture.,1
"On May 15, 2018, an employee was spotting for an excavator that was pulling a tree when a tree branch whiplashed and struck his hip, fracturing his pelvis and requiring hospitalization.",1
"An employee was disconnecting a hydraulic line from a cylinder that was being lifted from a core press by a crane. The cylinder then slipped from the cylinder bracket, and the employee's left little finger was pinched between the cylinder bracket and press core frame. The left little finger was amputated at the first knuckle.",0
An employee suffered a laceration to the face and forearm and a fractured rib after being struck by the door of a walk-in freezer. The employee was hospitalized.,1
"On 5/15/2018, an employee was loading tubular product onto a tractor trailer when the employee fell off the edge of the unguarded truck/work platform to the ground, sustaining a leg/foot injury that required hospitalization.",1
"An employee fell from an A-frame ladder to the ground while installing duct wrap insulation, fracturing the right leg.",1
An employee was cutting up blemished rolls of aluminum for re-melting. He was using a pry bar to create gaps in the rolls when his left middle fingertip was amputated in the roll where he was prying the material.,0
"An employee tripped over a stool while walking behind a snack bar, falling to the floor and fracturing the right hip.",1
"A maintenance employee was splicing an underground cable. As he was heat shrinking the waterproofing tubing around the cable splice with a torch, the heat caused a gas service line under the cable to break, leaking gas. A flash fire then occurred, burning the employee's face and causing second degree burns to his arm.",1
"An employee was working in a molding injection machine when the employee's right ring finger was pinched, resulting in a fingertip amputation.",1
"While sweeping the street, a temporary employee attempted to adjust a water filled barricade. When he pushed the barricade, the chain link fence portion shifted and severed his left index fingertip between the nail bed and the first digit.",0
"An employee was cutting meat with a saw when he received a laceration to his right middle fingertip, resulting in an amputation.",0
"An employee was helping coworkers place a window in a leak test chamber when his right index finger was caught between the opening of the test chamber and the window, resulting in a finger amputation.",0
"An employee used an extension ladder to access a roof. He slid off the roof and fell to the ground, fracturing an elbow and some left-side ribs.",1
An employee suffered a health-related incident that caused her to pass out against a wall and then fall backwards onto a concrete floor. She was hospitalized with a head contusion and concussion.,1
"An employee was ripping a 2x4 on a table saw when the employee's hand contacted the blade, amputating the thumb tip.",0
A temporary employee was loading product onto a tractor trailer as a crane operator was lowering product onto the truck. The temporary employee's hand was then caught between the crane's load and the product on the truck. The employee suffered a broken hand and was hospitalized.,1
An employee was trying to prevent pouches from jamming on a machine when the guillotine knife came down and amputated the employee's left thumb tip.,1
"An employee was sweeping the warehouse floor. At the same time, a forklift driver was backing up in a designated lane and made a left turn. The operator was turned around looking as he reversed. The injured employee was in the operator's blind spot and was struck as the forklift turned, suffering two broken leg bones.",1
"An employee was using a spud pole while using a crane to hold a large ring when the ring moved and caught the employee's left ring finger in a pinch point, amputating the fingertip (no bone).",1
An employee was changing spacers on an over arm. The over arm slipped off the stand and pinched the employee's left little finger between the arm and table top resulting in amputation of the fingertip.,0
"An employee was re-spooling a chain on a machine used to spray insulation. As he finished, the machine energized and two of his left-hand fingers where caught in the chain, amputating one and fracturing the other.",1
"On May 16, 2018, an employee was using a stationary disc grinder to grind the edge on metal stock when his left thumb contacted the disc, amputating his thumb tip.",0
"An employee was working in a scissor lift to remove beams and a canopy when a beam sheared off and fell, striking and fracturing his back.",1
"An employee was walking toward the exit door of a freezer. He bent over to pick up a piece of wood and slipped on ice, falling to the floor and fracturing his right arm below the elbow.",1
An employee suffered a hip fracture after falling from a loading dock to the ground.,1
"An employee was servicing and cleaning an air handler when back pressure (air) from the unit caused it to spin backwards.  The employee attempted to grab the belt with his gloved hand and it was pulled into the pulley, amputating a fingertip.",0
"An employee was climbing on a trailer to retrieve a hardware bag when the employee tripped and lost footing, falling off the trailer to the ground. The employee suffered fractures to the left wrist and left ankle.",1
"While inspecting a metal roof, an employee slipped on debris and fell approximately 8 feet to the ground below, suffering broken ribs, a collapsed lung, left shoulder pain, and head lacerations.",1
"On May 16, 2018, a temporary employee had been cutting an aluminum extruded bar stock on a circular saw and then turned the machine off to blow dust off of the blade using an air hose. The blade had not come to a complete stop and nicked him, lacerating his right index fingertip. His fingertip had to later be surgically amputated.",1
"An employee was using a pneumatic nail gun to install asphalt shingles on a residential roof when the nail gun brushed his head and was triggered, shooting a nail into his head. He was hospitalized.",1
"An employee was knocking clumps of seasoning down to an auger when the auger hit his right hand, amputating his ring finger and severely lacerating his middle finger.",0
An employee was operating a disc grinder when a piece of metal became caught in the grinder and pulled the employee's left hand into the disc. The employee's left thumb was lacerated.,1
"An employee was standing behind a counter when a customer came in and started swinging a knife at the employee. The employee was chased around the store and stabbed multiple times, requiring hospitalization.",1
"An employee was dragging a large plastic container to another trailer when the employee's pant leg became caught on a step, causing the employee to fall and fracture an ankle.",1
An employee was performing routine maintenance on an aircraft and amputated the right index fingertip while attempting to position a cable.,0
"An employee was offloading sand at a dust collection unit that was clogged. The auger was not rotating, so employees struck it with a hammer. The employee's fingers were inside the housing unit of the auger when it inadvertently began to rotate, crushing his fingers. He was hospitalized and had surgery.",1
"An employee's right arm was struck by a valve discharge door while emptying out a blender, suffering a contusion.",1
"An employee was going down stairs when the employee's glasses fogged over due to coming out of a 40-degree room. The employee missed the last step and fell down onto concrete, sustaining left shoulder and left hip fractures.",1
An employee was operating a tugger with an attached trash hopper. He reached to pick up an item off the floor and suffered a knee cramp. He fell to the floor and fractured his right hip.,1
"An employee was sweeping flour dust off of equipment when the machine guard unlatched and opened the machine guard door. The employee was attempting to close the door when another piece of the machine guarding became unsecured. While attempting to reinstall the guard that became unsecured, the employee's hand contacted the exposed motor chain, which was running. This caused the employee's hand to be pulled into the in-running chain and sprocket, partially amputating the employee's left pinky finger and lacerating three fingers.",1
An employee tripped over a fan cord and suffered a broken hip.,1
"An employee was exiting the roof and stepped onto a tied off ladder. The ladder shifted and the employee fell 20 feet, sustaining two fractured ribs, a fractured collarbone, and a head laceration that required stitches.",1
"An employee was using a forklift to support a stamping die set so he could clean underneath the suspended load. His hand was under the 4,000-pound die set when it slipped and trapped his left hand.",1
"On May 16, 2018, an employee was cutting a piece of stainless steel on a shear in the maintenance shop when two of his left-hand fingertips were caught in the shear point. One finger lost a fingernail and some flesh, while the second lost flesh.",0
An employee was using an elevator to bring materials to co-workers. He had been at work for about 1 hour when he started feeling dizzy due to a possible heat-related illness.,1
An employee was making adjustments on a bread bagger chain and sprocket when his right middle finger and ring fingertip were amputated in the chain/sprocket.,0
An employee was lifting a compressor from a rack with a crow bar when the crow bar slipped. The employee's left index fingertip was then amputated between the compressor and the rack.,0
"On May 16, 2018, an employee was replacing windows on the fourth floor of an apartment building when the employee fell out of a window to the ground below. The employee broke both legs and wrists, requiring hospitalization.",1
An employee was delivering steel from a truck that was not on level ground. He was untying the tie-down strap when a piece of steel pipe rolled off of the truck and broke his lower right leg.,1
"An employee was putting nuts and washers on bolts while standing on an 8-foot A-frame ladder that was in the closed position when the ladder slipped. The employee fell and struck his head on the concrete below, suffering head trauma and a skull fracture.",1
"An employee was welding an 8-inch pipe into a future furnace. The electrode holder ""stinger"" came in contact with the pipe while the employee was also touching the pipe, creating a circuit through the employee to the ground. The employee received an electric shock and lost consciousness, requiring hospitalization.",1
"An employee was using a knife sterilizer to clean the flooring when his hand slipped off of the container, causing hot water to run down his leg and into his boot. He received burns to the right ankle.",1
"An employee was lifting and piling stacking sheets when pieces of the sheets hit his left ankle, breaking two bones. He was hospitalized and had surgery.",1
"A patient got up from a wheelchair to be weighed on a scale as an employee stood nearby to record the weight. The patient's knee buckled and the patient began to fall, so the employee performed an assisted fall and helped the patient to the ground. In the process, the employee suffered a back strain and pain, requiring hospitalization.",1
"An employee drove a forklift over a shrink wrap machine, then got off the forklift to fix the machine. The forklift rolled into the employee, breaking his right foot and leg. The forklift was not in park at the time of the incident.",1
"An employee was taking the temperature of a panel box with a probe when the employee touched the hot line, receiving an electric shock. The employee suffered electrical burns to the left middle finger and was hospitalized.",1
"An employee was holding a piece of siding in position with his left hand so he could nail it in place. His right hand slipped while positioning the nail gun and the nail shot into his left hand, puncturing it and possibly fracturing one bone. He was hospitalized and had surgery.",1
Employees were troubleshooting equipment. An employee's right ring and pinky fingers were between the belt and pulley when the stuck pulley activated resulting in lacerations.,1
"An employee was cleaning underneath a belt on a machine at the chain drive when her glove became caught on the chain drive, pulling her hand into the moving part. She suffered a right finger amputation and fractured right wrist.",0
"An employee was reversing an electric pallet jack and backed into the corner of a storage rack. She suffered a fractured ankle, requiring hospitalization.",1
An employee drove up to a facility to drop off a trailer. The brakes were not set and the vehicle started rolling. The employee reached to set the brakes and slipped and fell. The vehicle tire then ran over and fractured his lower left leg between the ankle and the knee.,1
"An employee was performing end-of-shift cleanup near an overhead dust collection pipe, which collected steel shot from a blast machine and delivered dust and dust particles to the dust collector. The pipe broke free from its connecting joint, striking the employee in the back and head.",1
"On 05/17/2018, an employee finished unloading a boat in the yard area and was walking off a travel lift when he tripped on a piece a wood, fell, and hit his head on a concrete pedestal. He sustained head and neck trauma, requiring hospitalization and stitches.",1
"An employee was working near a crane helping to install unit carts when the employee grabbed the steel cable of the hook sheave, resulting in a left pinky finger amputation. The crane was operating at the time.",1
"An employee was cleaning up debris at a demolition site when the employee's hand was pinched between a backhoe bucket and a concrete wall, amputating the right middle fingertip.",0
An employee was removing a nitrogen line from a unit. The employee did not realize that the nitrogen hose was back-pressured with 30 psi of steam that originated from a manifold located at the north end of the unit. The steam caused second degree burns to the employee's right inner thigh and left arm.,1
An employee was pulling wire and installing conduit and suffered a heart attack.,1
"An employee was repositioning the remains in a cremation chamber using a repositioning tool. The tool slipped and sprung back toward him, leaving him off balance. He fell, fracturing his pelvis.",1
An employee was cutting an aluminum molding with a chop saw when the saw caught and amputated two left-hand fingers.,1
"An employee was going up a roof hatch ladder when the employee slipped and fell approximately 12 feet to the concrete floor, fracturing the right femur, right pelvis, and multiple ribs.",1
"On May 17, 2018, an employee and a coworker were preparing to move steel plates. The coworker had the steel plates lifted with a pry bar while the employee's hand was placing a clamp under them. The coworker removed the pry bar, which caused the steel plates to fall onto the employee's left middle finger and resulted in an amputation.",0
An employee was adjusting a jig when it shifted and amputated the employee's right small fingertip.,0
"An employee was using a shovel and digging to locate a gas line when the employee began to feel symptoms of heat exhaustion, including muscle cramps, nausea, and dizziness.",1
An employee was sitting on a recycling truck that was making pickups when she stepped down from the truck onto uneven gravel and sprained her ankle.,1
"An employee was attempting to flick a rock out the bottom rollers of a roller mill when a roller caught his middle finger, amputating it just past the nailbed.",0
A piece of wood/splinter from a wooden crate embedded in an employee's left thigh.,1
"An employee was working at an injection molding machine. A fire started at an extruding tower, when some silicone tubing broke and fell into the oven. The employee tried to fight the fire and suffered smoke inhalation.",1
"An employee was descending out of a tree after completing his cuts when the 4-inch limb that he was tied off to began to bow and then broke below the tie-off point. He fell approximately 40 feet to the ground, injuring his ankles and back.",1
"An employee was helping to spray concrete when he fainted due to dehydration, requiring hospitalization.",1
"An employee was adjusting a blow molding milk container machine when it closed on and smashed the employee's right pinky, resulting in hospitalization and surgery.",1
"An employee was retrieving electrical wires with a tugger machine when a pulley or wheel mounted on the wall came free and hit her legs, fracturing her left leg and bruising her right leg.",1
"An employee was placing a piece of angle iron on a roller to stop the rotation of the drum when the employee's arm became stuck between the roller and drum, crushing the employee's arm/hand.",1
An employee was delivering packages when his leg began cramping due to heat stress and dehydration.,1
An employee was struck by the right rear wheel of a reversing reach forklift while performing maintenance on an excavator.,1
"An employee was attempting to step from a step platform to a mobile telescoping stand. There was a 21-inch gap between the two platforms and the employee fell 8 feet down to the platform below, suffering multiple body injuries.",1
"An employee was moving an 800 lbs. control panel onto a rig floor via forklift operations when the control panel became caught on a handrail, shifting the control panel from the strap. The control panel fell, striking the employee and then falling on top of the employee's left leg. The employee sustained a fractured left leg.",1
An employee was loading parts into a parts washer when a 25-inch pressure plate fell and struck the employee's right index and middle fingers resulting in amputation.,1
An employee was bitten by a mouse in a research laboratory.,1
"An employee was changing out the saw cylinder on a de-linter machine when a helper accidentally bumped the hydraulic lever that controls the door. The door closed on the employee's right index finger, causing deep lacerations that required surgery and hospitalization.",1
"On May 17, 2018, an employee fell 6 feet from a support to the floor while changing a fermentation filter, suffering multiple skull fractures.",1
"An employee was attempting to pull a bag down on a poly bagging machine with his left hand when the jaw clamp closed on his finger. His left index finger was caught in the forks of the machine, resulting in the amputation of his left index finger.",1
"An employee was emptying garbage into a steel bin when a forklift operator struck the employee's foot, pinning it against the steel bin. The employee suffered leg/foot fractures and was hospitalized.",1
An employee was cleaning showers when a shower stall door closed on and amputated the employee's right pinky finger.,1
"An employee was operating a setting machine when a load of green brick became jammed in the machine. The employee turned the safety keys to set the machine to safe mode, removed the key, and attempted to unjam the machine. The machine then cycled with the employee inside, causing two tibia fractures and a puncture wound to the ankle.",1
"An employee was cutting a 2x4 with a circular saw when the blade contacted and deeply cut his left wrist, wounding the muscle and nerves. He was hospitalized.",1
"An employee was moving a portable expandable roller conveyor system in the truck loading area when the conveyor system wheel rolled into a divot in the ground and the expandable portion of the conveyor closed on the employee's left middle finger, amputating it to the first knuckle.",0
"An employee was cleaning out a machine with a trainee when the air pressure line activated, turning on the machine. The employee's right hand was then caught in the machine, amputating the middle finger.",0
"An employee's hand became infected due to a metal sliver, requiring hospitalization.",1
"An employee fell off a gasoline tank while pumping gas, breaking three ribs.",1
An employee was helping to unload a truck when a U-box smashed and fractured his right pointer finger.,1
"Employees were in the process of packing up to leave a jobsite. One of the employees was opening the back door of a trailer when his right hand was caught on the wire that is used to open and close the door, amputating his right middle fingertip and lacerating his right index finger.",1
"An employee was watching a forklift operator remove a pallet from a semi-trailer when he reached down to catch a box falling off a pallet. The forklift operator maneuvered the pallet into the trailer wall, causing the employee's finger to become caught between the two. The employee suffered a fingertip amputation.",0
A pallet fell and pinned the employee's right index finger between the pallet and the rack resulting in amputation of the fingertip.,0
"An employee was moving a cart with sheet metal on it when the sheet metal ran into a building pole. The employee's arm was between the pole and the sheet metal, resulting in a laceration to the employee's left wrist.",1
"An employee was climbing out of the back of a truck when their foot slipped on the step and the employee fell to the ground, suffering head and back injuries.",1
An employee was walking through a temporary construction area when he stepped into a 3-foot-deep footer and fractured his heel.,1
"An employee was observing pile driving from a sea wall but needed to obtain a reading from the barge, so he began descending an extension ladder to access a floating platform. He fell from the ladder onto the platform, breaking a rib.",1
An employee sprained his back while lifting an empty bag.,1
"An employee was installing sheetrock off a scissor lift when he leaned against the scissor lift railing.  The railing gave way and he fell approximately 24 feet to the ground, suffering lacerations and bruising.",1
"An employee slipped on a wet floor and fractured her left arm and ribs, requiring hospitalization.",1
"An employee was observing a driver trainee dumping a loaded trash compactor when he was struck by the compactor's metal container door, causing him to fall backwards and strike his head on the ground, suffering a laceration to the back of his head.",1
A driver was found on the ground and may have fallen off of the lift gate that is located on the back of a straight truck.  The driver was hospitalized for two blood clots on his brain and three broken ribs.,1
An employee suffered a fingertip amputation while feeding a machine.,0
An employee was suffered an amputation to the right index finger while cleaning a chiller.,0
Two temporary employees were involved in an altercation and one was stabbed with a knife.,1
"An employee was under the waste collection truck he had been driving, adjusting the rear driver-side brakes. The truck was idling and began rolling downhill, running over the employee and crushing his legs and abdomen.",1
"On May 18, 2018, an employee was performing rooftop work with a coworker when the coworker left the roof to get a drill from a vehicle. The employee walked to the neighboring building's metal roof, stepped on a fiberglass skylight, and fell through to the concrete below. The employee was hospitalized with a shattered left elbow and fractured left arm.",1
"During an unloading operation, an employee was struck by a separator after it was unstrapped from a trailer, suffering internal injuries and a fractured pelvis.",1
"An employee was rigging steel on a truck bed when he was caught between a steel column and the truck bed, suffering an 8-inch gash on his left inner thigh and requiring hospitalization.",1
"An employee was using a rivet buster to break up a concrete floor for demolition when the employee fell through the working level to the level below, suffering a concussion.",1
"An employee was conducting a qualifying exercise with his 9mm handgun on a shooting range. While he was removing the handgun from his holster, it accidentally discharged, striking his upper right leg.",1
"An employee was walking on the right side of equipment in a blind spot. The equipment operator maneuvered right to avoid another piece of equipment, and the front right tire caught the injured employee's legs and pinned him to the ground. He sustained a back injury and potential pelvic fracture.",1
"An employee was using a sheet metal roller machine to make a part and was attempting to straighten a piece when the roller caught the employee's left hand, amputating the little and ring fingers.",0
"An employee was in a bucket tightening nuts on the a transformer cutout when he contacted 7,200 volts, suffering a burn to the left hand that required hospitalization. Rubber gloves were not worn at the time of the incident.",1
"An employee was running a core machine when the employee's finger was pinched between the box and plate, suffering a fingernail avulsion and subsequent amputation.",0
"An employee was using a horizontal band saw to separate wood pallets when the employee's left thumb came into contact with the blade, sustaining an amputation.",0
"An employee was climbing out of an open air electrical vault. As the employee reached to gain access out of the vault, the manhole grate door became dislodged and fell onto the employee's right arm, fracturing it.",1
"An employee was operating a stand-up forklift when his foot slipped. When he tried to correct himself, his hand came off the steering control and the forklift struck a guardrail. He suffered a foot fracture.",1
"An employee was standing 5 feet away from a sump pump casing cover helping a coworker pull the casing cover with a hydraulic puller. When pressure was applied to the puller, one of the bolts came loose and struck the employee, who suffered a fracture/laceration to the forehead.",1
"On May 18, 2018, an employee was operating a bag machine when the employee's hand was pulled into the machine's drive rollers, suffering a severe laceration. The machine was guarded at the time.",1
"An employee was operating a punch press while holding an aluminum extrusion with both hands. He pressed the automatic push pedal with his foot, and his left hand was caught between the press and aluminum extrusion, breaking his left ring finger.",1
"An employee was driving a golf cart when his left leg struck a dumpster as he drove past it. He sustained a left calf laceration and left calf muscle injury, requiring hospitalization.",1
An employee was working inside a greenhouse when she slipped on the wet concrete floor and fell on her right hip and right wrist. Her right wrist was fractured and required surgery.,1
An employee was on her way back to the office from a training when she was shot in the face during a traffic incident.,1
"An employee tripped over a bin that was placed in the hallway, breaking her hip.",1
"On 5/18/2018, a temporary employee was operating a punch press when it amputated the employee's finger(s).",0
"An employee was moving material with a hoist. As he was setting the material down, the I-beam that held the material fell over onto his left leg, crushing and causing an open wound to his left shin.",1
"An employee was walking on a metal walkway to get more roofing materials to patch a building's flat roof holes when he tripped, fell, and hit his head on the grated metal floor, resulting in a concussion and head laceration. He was hospitalized.",1
"An employee was cutting timber logging with a chainsaw in an upward direction with the top of the chainsaw bar when the chainsaw kicked down, cutting the top of his foot.",1
Three carpenters were removing glass from a crate. Two employees placed the glass on the cart while the injured employee was at the end of the crate. The glass began to tip and the injured employee attempted to stop the glass from falling. The glass pinned the injured employee's leg to the ground resulting in leg bruising.,1
An employee fell off a step ladder while throwing trash into a compactor resulting in a broken left ankle.,1
"An employee was working on the rig floor while setting a casing when the employee lost balance and placed the left hand on the casing. At the same time, the casing slips were released and the inter-tool slid down, amputating the employee's left index finger at the first knuckle.",0
An employee was cutting a metal washer with a torch when a piece of the washer fell on and broke the employee's arm.,1
An employee was installing cabinets in a building. He was using a saw to cut cabinet doors when the saw kicked back and amputated his left thumb.,0
An employee was walking through the brush on an unpaved path when she tripped on an exposed root or her lace became caught on a root and she fell. She fractured her pelvis and was hospitalized.,1
An employee lost consciousness while working in the corn field due to a possible heat related injury.,1
"An employee went to sit down on a bench in a wire line support trailer when he felt pain in his left middle finger. He removed his gloves to investigate and noticed a puncture mark below the first knuckle on his left middle finger. The puncture later became infected, requiring hospitalization.",1
"An iron worker was repairing a platform at a paper machine when the employee suffered dehydration or a heat-related illness, requiring hospitalization.",1
An employee was driving a truck transporting a 40-foot container. The employee was making a turn when the container fell sideways and the truck overturned. The employee sustained a broken right femur inside the cab.,1
Two employees were performing a crane inspection from a man basket on a fork truck approximately 20 feet in the air when the truck malfunctioned and the basket fell stopping about 2 feet above ground level. One employee was hospitalized for broken heels in both feet.,1
An employee was inside a dish washer area carrying three glass mugs when he slipped and fell to the floor cutting his right hand and suffering nerve and tendon damage that required hospitalization.,1
"After working in the garden department, an employee experienced heat exhaustion and was hospitalized.",1
"An employee was cleaning a scalder. He laid the nozzle end of his water hose over the side of the scalder while he left to perform another task. When he returned to pick it up and lifted it, the hose became entangled in the running shackle line. As he tried to pull the hose out, his left middle finger was caught on the handle of the water valve nozzle attached to the hose. He pulled his finger back as the line was moving, sustaining a finger avulsion that required surgical amputation.",1
"An employee was working from the extended boom/basket of a bucket truck. The outriggers of the bucket truck were not set on solid ground, resulting in the outrigger sinking into the ground as the boom was further extended. The truck became unstable and collapsed with the employee inside the basket. He rode the bucket to the ground and fractured his back and ribs.",1
"An employee was loading a truck when the employee passed out, requiring hospitalization for a blood clot in the lung.",1
"An employee was getting tap water from a resident's restroom when the employee fell, suffering a hip fracture.",1
"An employee was in a bucket operating a chain saw to cut a tree limb that was laying on top of an electrical distribution line (7,200 volts, single phase tap). The tree slid off the line and the wire caught the employee, flipping him out of the bucket (approximately 20 feet) and onto the ground. He suffered a collapsed lung, broken ribs (left side), broken shoulder (clavicle), and fractured vertebrae.",1
"An employee was setting drums on a highway for a lane closure when he tripped and fell on the road, fracturing his lower left arm.",1
"An employee was on a ladder trying to locate a gas leak when an explosion occurred, causing a second degree burn to the employee.",1
"A temporary employee was closing the door on a loaded tractor trailer. A bar was in place in the E-track to keep the product off the door. The employee's finger was caught between the E-track bar and the closing door, resulting in a right ring fingertip amputation as well as broken middle and pinky fingers.",0
"On 5/20/2018, an employee was caring for a patient when she fainted and fell onto her right side, injuring her right posterior shoulder, ribs, upper back, hip, and leg. She was hospitalized.",1
An employee was cleaning poly from the edge of the pressure roll on an extruder. The employee tripped and caught his hand in a nip point as he tried to brace himself. The Injury resulted in a partial amputation of two fingers and a de-gloving injury to two other fingers.,1
"An employee was walking when she lost her balance and fell, fracturing her kneecap. She was hospitalized and had surgery.",1
"An employee fell from a step ladder to the concrete ground on her right side, striking her head on a safe. She suffered a fractured pelvis and a head laceration, requiring hospitalization.",1
"A security guard was attacked by a patient, suffering a concussion and a blow to the forehead that required stitches. The employee was hospitalized.",1
"An employee fell off a ladder while hanging a poster, sustaining a fractured tibia.",1
"An employee was working from drywall stilts while installing a ceiling grid when he lost his balance and fell to the concrete floor. He sustained a concussion, skull fracture, fractured sphenoid bone, subdual hematoma, and intracerebral hemorrhage.",1
"An employee was putting material into a press brake when the machine cycled. The employee's hand then entered into the point of operation, cutting the right index fingertip, which had to be surgically amputated.",0
"Employees were relocating a VFD to its installation location using a rough terrain forklift. The load was not secured at the time and as the forklift changed gears from 2nd to 1st, the load swayed and fell off the forklift, striking the injured employee in the leg. The employee's leg broke above the knee.",1
"An employee was using a jackhammer to break rock in an excavation when a section of asphalt (approximately 2 feet by 2 feet by 8 inches) broke away and struck his left leg, fracturing his tibia. Person protection equipment was worn at the time.",1
"Two employees were fighting over a nail gun when one employee was shot in the stomach with the nail gun, requiring hospitalization and surgery.",1
"An employee was moving a cart out of an elevator when a metal plank contacted the handrail on the opposite side, creating a pinch point between the plank and the handle on the cart. The employee's right middle finger was caught in the pinch point, resulting in a fingertip amputation.",0
"An employee was in bucket replacing a utility pole when he contacted an energized powerline (7,200 volts) and received second and third degree burns to the upper left arm.",1
"Two employees were operating the welding jig. When one employee activated the two hand controls, the injured employee's hands were between the part and jig, resulting in a partial amputation to the injured employee's left little finger.",0
"An employee was driving a baggage tug to pick up bags from a default belt when the employee hit a pole outside the bag room. The employee's left foot made contact with the pole, fracturing the ankle.",1
"An employee fell from a fixed ladder while performing maintenance on a large press, suffering a skull fracture that required hospitalization.",1
An employee was operating a circular saw at a residential construction site when the saw kicked back and lacerated the employee's right leg. The employee was hospitalized.,1
"An employee was placing skids for pipes that needed to be unloaded when a mechanical lifting device failed, allowing a steel pipe to hit the employee's right leg. The employee sustained a broken right femur.",1
"An employee was inspecting a tile roof when he slipped off the roof, suffering compression fractures in his back and head lacerations. He was hospitalized.",1
"A temporary employee was in the back of a flat bed boom truck handing shingles to another employee when he lost his balance, fell on a wooden pallet, and broke his right arm. He was hospitalized.",1
"An employee was scraping excess dough off of a sheeter machine's roller when the roller cut his left middle finger, resulting in a fingertip amputation. The machine was running and unguarded at the time.",0
"An employee suffered syncope twice while walking to a private residence, falling to the ground and suffering a head injury that required hospitalization.",1
"On 5/21/18, a maintenance employee was working on the back of a straight cut eight machine, troubleshooting the lights of a folding gate's sensor, when his right hand was placed on the folding gate. The folding gate then came down on his right middle finger and amputated his fingertip.",1
"An employee was using a drill press machine. His left hand was under the press when it was activated via the foot pedal. The drill then came down and drilled through his left hand at the thumb and forefinger webbing area. He suffered an amputation of the left forefinger, fused first joint of the left thumb, and nerve damage to the left thumb.",1
An employee was sweeping debris from a roof when the employee stepped into an 18-inch by 18-inch hole that was covered with an unsecured piece of metal before falling 14 more feet to the concrete below. The employee suffered a broken right elbow and right wrist.,1
"An employee was checking the oil in a golf cart when his right hand was caught in the cart's pulley, amputating his right index and middle fingers.",0
"An employee was walking down stairs holding the railing. When she reached the bottom stair, she fell and fractured both feet, requiring hospitalization.",1
"An employee was removing an internal spindle part when the spindle fell from the employee's hand. The employee tried to catch and grab the spindle. The employee's fingertip was crushed between the grind wheel and the steady rest for the work piece, resulting in a surgical amputation.",0
"An employee slipped on water and fell on the floor, injuring her foot and requiring hospitalization and surgery.",1
"On 5/21/2018, an employee was inside an aerial lift and raising it when the employee's right hand became pinched, causing a laceration that resulted in a right pinky finger amputation.",1
"An employee was kneeling down to receive product when a nearby stand-up pallet operator turned a corner, causing the 240-pound load to fall and strike the employee. The employee suffered broken ribs and collapsed lungs, requiring hospitalization.",1
"An employee operating a tug was struck by a police car, requiring hospitalization.",1
"An employee was trying to climb up a 6-foot scaffold to paint an 8-foot fiber glass tank. He was using a step stool to step up to the scaffold ladder when it slipped out from underneath him. As he tried to catch himself from falling down, he broke his left ankle and fell about 18 inches to the concrete floor below. He was hospitalized and had surgery.",1
"An employee was walking behind a top loader when the top loader operator reversed the equipment to pick up a container. The employee's right foot was struck and caught on the top loader wheel, resulting in an amputation below the knee.",1
"An employee was inspecting a hydraulic hose for leaks when another employee activated the hock cutter that was powered by the hose, releasing a high-pressure stream of hydraulic fluid into the employee's right hand. The fluid cut his hand and was injected under his skin.",1
"An employee was unloading products from a company vehicle. While lifting the rear gate, the employee's left hand was caught in the lift mechanism, amputating the middle and ring fingertips.",1
"An employee was filling a sweeping machine with water using a hose.  The employee pulled on the hose, got tripped up, and fell backwards, breaking the right leg and requiring surgery.",1
"On May 21, 2018, an employee was exhibiting erratic behavior due to possible acute manganese toxicity, requiring hospitalization.",1
"On May 21, 2018, an employee was cleaning a cheese grinder when the chemical he was using splashed onto his chest, causing chemical burns.",1
"An employee was hand loading demolition concrete into a backhoe bucket. When he adjusted the broken concrete in the bucket his right hand was caught between the concrete and the bucket, cutting and breaking his right index finger. He was hospitalized.",1
"An employee was cleaning the top of a tank trailer when he fell to the ground, breaking his femur.",1
"An employee fell to the ground while climbing onto the driver's seat of a box truck, suffering a head injury.",1
"An employee was helping to break down an 80-ton crane that was lowering a weight onto a trailer. He was guiding the weight when the load shifted, catching his hand between the rigging hooks and the counterweight. His right index finger was partially amputated.",1
"An employee fell while servicing a truck, suffering a head contusion that required hospitalization.",1
"An employee was dewatering the work site. A guy line on a drill came loose and knocked a live electrical powerline into the employee, shocking his forearm. He was hospitalized.",1
"An employee was part of a crew that was replacing piping and cable. While removing a pipe with a C-clamp, his left thumb and index fingers were caught between the C-clamp, causing an open fracture on his hand that required surgery.",1
An employee was adjusting a piece of locked out pay off equipment when the arm of the equipment sprang back and struck him in the chest resulting in fractured ribs (5) and the right shoulder.,1
"An employee was operating a tractor with a feed wagon attached. The employee exited the tractor cab to uncouple and disconnect the wagon from the tractor. The jack stand was up and the wagon hitch fell onto the employee's foot, injuring a toe.",1
"An employee was exiting a truck when his leg became tangled in an airline. He lost his balance and jumped from the catwalk landing, then fell against the truck, injuring his lower back.",1
"An employee was cutting a window sill with a chop saw when the saw cut his left index finger, resulting in an amputation.",1
An employee was operating a bender machine when his right hand was caught between the rebar and the roller arm as the foot pedal was activated. His right index fingertip was then caught and amputated.,0
"An employee was unloading furniture from a truck. He was climbing down the back of the truck when he fell, hitting his head on the ground and fracturing his pelvis.",1
An employee fell 5 or 6 feet from a dumpster and was hospitalized with a back injury. ,1
"An employee was preparing to install a fire alarm part while standing on a 6-foot A-frame ladder (second rung from the top). He was attempting to get a marker from his pocket when the ladder twisted and he fell to the pavement, injuring his pancreas and requiring hospitalization. His right leg also became caught up in the ladder, causing dislocation and damage to the knee.",1
"An employee removed nuts on a stripper head and was raising the head up over the annular when the head slipped and struck the employee's left arm, pinning it against studs. The employee's arms sustained multiple fractures.",1
"An employee removed a belly pan to work on a bulldozer component. As the employee was re-installing the belly pan, it fell and pinned the employee's arm to the ground. The employee sustained a broken arm.",1
"An employee was performing maintenance on a press brake machine when an adapter bar fell approximately 18 inches and struck the employee's left pinky finger, resulting in a fingertip amputation.",0
"An employee was down in a culvert directing an excavator operator who was moving a 24-inch cast iron pipe. The rigging slipped from the excavator and the pipe struck the employee's left leg, possibly fracturing it. He was hospitalized.",1
"An employee was climbing up a ladder to inspect a roof for a leak when he fell to the ground, injuring his arm and requiring hospitalization.",1
An employee was pushing a grill out of the stock room for a customer when she turned the corner and felt a pop in her right knee. She fell to the floor and shattered her right knee.,1
"An employee was securing a horizontal form when the employee stepped away from the work platform and onto an exposed area of the building's leading edge. The employee then fell to the ground, suffering potential body fractures. Wooden guardrails were in place at the time.",1
"An employee was lifting an outrigger float (pad) off a crane when the outrigger swung around and the float slid off, pinching the employee's right middle finger between the deck of the crane and the float. His right middle finger distal tip was amputated.",0
"An employee replaced the tape on a part that was going through a guillotine saw cutter. Afterward, the part would not come through the machine properly. As she was checking on the part, the saw blade came down and amputated her right index finger. The saw cutter was guarded at the time.",0
"An employee was using a jack hammer on the fourth floor of a four-story concrete garage when the jackhammer broke through the floor. The employee then fell approximately 10 feet to the floor below, suffering a back fracture.",1
An employee working at a private residence fell off the first step at the front entrance when his knee buckled.  The employee was hospitalized with a torn tendon.,1
"An employee was using a vehicle jack to hold up a vehicle while operating a speed impact gun. The vehicle jack failed and the vehicle struck the employee's head, causing a concussion and skull fracture. The employee was hospitalized.",1
"An employee was hoisting an elevator platform when the rope broke, causing the elevator to fall into the pit. The employee's left index finger was then caught between the elevator platform and the rail (where the elevator moves up and down), resulting in an amputation to the second knuckle.",0
"On May 22, 2018, at approximately 8:40 a.m., an employee was in the enclosed cab of an excavator preparing the ground for the installation of a silt fence. While the employee was digging around the base of a dead oak tree, a limb broke off of the top of the tree and fell onto the cab of the excavator. The limb shattered the glass sunroof, and the employee was struck by glass and broken limbs.  The employee was hospitalized for a skin graph to the right index finger, cut on the head and cheek, and bruise to the hand and shoulder.",1
"An employee fell to the floor while walking, injuring the right knee and requiring surgery.",1
"An employee was removing an ice tray in the dish room when the employee stepped/slipped on a tray liner, injuring the left knee.",1
"An employee was trying to adjust brakes on a pulling unit and was installing a chain around the main drum. His left hand was on the chain when the drum moved, catching and smashing his left pinky between the drum and chain. He was hospitalized.",1
"An employee was running wiring when it became stuck. He then contacted a live 480-volt bus bar and an arc flash occurred, burning his left hand and wrist.",1
"On May 24, 2018, at approximately 10:20 p.m., an employee drove to a local site to pick up a drilling jar/tool. While the employee was waiting for the trailer to be loaded, the drilling jar (which was over 20 feet long, 6 inches wide, and weighed approximately 2,000 lbs.) rolled out of the trailer and struck the employee's right foot. The employee's right foot broke, requiring hospitalization and surgery.",1
"An employee was washing a CIS (center in shell) pump on a mogul machine when the employee was caught in the pump, resulting in a right ring fingertip amputation. The interlock was not operational at the time.",1
An employee was helping to move a railcar using a locomotive when the employee became dizzy and lightheaded.,1
"While two employees were working in a aerial lift near powerlines, a piece of metal fell from the lift and contacted the powerlines. One employee attempted to remove the metal from the powerline and was burned. The second employee was not injured.",1
"An employee was cutting down a tree when a branch hit the chain saw he was operating, causing the saw to lacerate his left leg above the knee.",1
"An employee was removing a box from a cart machine when the machine was jogged, which then caught the injured employee's right hand in a nip roller. The employee suffered multiple fractures to the right hand and was hospitalized.",1
"An employee was tightening the belt to a screen drive motor assembly when the employee's right thumb became caught between the belt and pulley, amputating the thumb tip.",0
"An employee was pulling scrap paper from the press folder when his left index finger became caught under a belt, amputating his fingertip. The belt was unguarded at the time of the incident.",0
"An employee was using a stair chair to carry a patient upstairs when he slipped. His right leg was caught between the stair chair and a step, breaking his tibia and fibula.",1
"On May 22, 2018, an employee slipped on the bathroom floor and injured her back while trying to prevent the fall. She was hospitalized.",1
"An employee was coming down the stairs when he missed a step and fell, cutting his left hand and breaking his left humerus. He was hospitalized and had surgery.",1
"While transferring from a ladder to the roof of a single-story house, an employee lost balance and fell 12 feet to the ground, breaking an ankle.",1
"An employee was milling a piece of aluminum with an end mill machine. The employee was raising the drill bit up when the employee's glove was pulled into the machine, resulting in a right ring fingertip amputation. The machine was running at the time of the incident.",0
"An employee was cutting a piece of wood on a table saw when the wood came back and struck his left hand, resulting in the partial amputation of his left thumb and index finger.",1
"An employee was moving a tag line on a soil bucket when the tag line became hung up on the stop block. The employee was attempting to grab the bucket handle when his right third finger was caught between the stop block and the tag line, amputating his finger past the first knuckle.",0
An employee was slicing chicken when the meat slicer and severed her right thumb tip. Cut-resistant gloves were worn at the time.,0
"An employee was attempting to retrieve paper that had fallen into a labeler machine when the employee contacted the timing belt, amputating the left ring fingertip. The machine was running and guarded at the time of the incident.",0
"An employee tripped over a cart and fell to the ground, fracturing his right knee/patella.",1
"An employee was attempting to hitch a box trailer to a pickup truck. As the employee was aligning the ball with the trailer hitch, their fingers were inside the hitch. When the ball aligned with the hitch the fingers were pinched resulting in amputation of the left middle fingertip. The fingertip was reattached at a medical treatment facility.",0
"An employee tripped over a box and suffered a broken hip, requiring hospitalization.",1
"On 05/23/18 at 3:00 p.m., an employee was assisting in pile driving operations. A drill bit was removed from the pile, and the employee's left thumb was caught in a pinch point on the hammer drill, resulting in an amputation.",0
An employee was transferring young chickens from a cage onto a cart. The employee lost balance and slipped from the access step falling backwards about 22 inches against a metal railing. The employee was hospitalized for a rib injury and possible pneumothorax.,1
An employee was stung by a bee and had a severe allergic reaction.,1
An employee was removing an end cap in the filler room when the pressurized end cap struck and lacerated the employee's right arm. The employee was hospitalized.,1
An employee was training when he became lightheaded and experienced an irregular heartbeat.,1
"An employee was conducting training when he became dizzy and experienced blurry vision, requiring hospitalization.",1
"An employee was using a forklift to remove items from a rack when the forklift became stuck. Another employee came to assist using a different piece of equipment. When the forklift became unstuck, it jerked and the forks entered the first employee's foot.",1
An employee who prepared roads for asphalt patching exhibited dehydration symptoms and began to have chest pains. The employee was hospitalized.,1
"An employee was using a hook to reposition metals inside a metal bin when he lost his balance and fell to the concrete floor, fracturing his right hip. He was hospitalized and had surgery.",1
An employee was tightening a coupling on a piping system that was under pressure. The coupling failed and the air pressure released and steam contacted the employee. The employee suffered stomach and facial burns and fractures.,1
"An employee was lifting a cylinder with a sling and hoist when the sling slipped off and the cylinder fell, amputating one of the employee's right fingertips.",0
"An employee was moving a catch pan that was filled with water (heavy) when his right thumb was caught between the pan and a cross bar, resulting in a partial amputation.",0
"An employee was climbing down a ladder scaffold when the employee fell about 3 feet to the concrete ground, fracturing an arm and the pelvis.",1
"An employee started work at 6:00 a.m. in the extruder room. At 8:00 a.m., he went to the break room and passed out. He was hospitalized for dehydration. The temperature in the extruder room was 100 degrees.",1
"An employee was attempting to unload a pallet from a truck when the pallet broke and the employee fell off the truck, striking his head on the ground.",1
"On 5/23/2018, an employee was mopping the floor when she backed into a capped conduit, slipped, and fell, breaking her wrist.",1
"An employee was closing a money safe door when the employee's left index finger was pinched in the door, partially amputating the fingertip.",0
"An employee was moving cattle when a bull broke loose and mauled the employee, who suffered internal and external bodily injuries.",1
An employee was cutting parts from a sheet of paneling using a table saw and amputated the tip of his right index finger.,0
An employee was removing a lock from the front of a 40-foot container when a third-party truck driver backed up and pinned the employee between the truck and the container. The employee suffered four broken ribs and bleeding around the liver.,1
"An employee was leaning against the loading dock's railing when it broke and he fell off the loading dock about 4 feet to the ground, striking a bollard along the way. He injured his back and was hospitalized.",1
"An employee was moving a piece of plate steel from the floor to a work bench using a crane with an under-hook magnet attachment when the piece of steel fell and crushed the employee's left pointer finger, resulting in partial amputation.",0
"An employee was using a box cutter to open a box. The cutter slipped, cutting the employee's wrist.",1
"An employee slipped on grease that spilled onto the floor from a hamburger tray when it was retrieved from an oven, breaking bones in his leg.",1
"An employee was unloading  steel drums from a tractor trailer at a customer's site when a drum tipped over. He attempted to catch the drum and his right ring finger was caught between the ring/bolts on two drums, resulting in a fingertip amputation.",1
An employee had an allergic reaction to the wax used to clean floors.,1
"An employee was erecting a divider in a storage unit when the employee slipped and fell off of a 22"" mobile scaffold. Part of the scaffold entered the employee's backside, causing a severe injury.",1
An employee's hands came in contact with the grinder blades in a meat grinder resulting in the amputation of fingertips.,0
An employee was using a packet screw machine to build cabinets when the machine cut his right index fingertip.,1
"Employees were mowing and trimming grass. While one employee was holding a mower's rear push bar, another employee lifted the front of the mower to carry it down four or five steps. While the employee was holding the front of the mower, his left ring finger came in contact with the spinning blade amputating the fingertip.",1
"An employee climbed into a bagger/loader machine and it closed on him, fracturing ribs and lacerating his liver.",1
"An employee was working from a ladder while performing an electrical evaluation at a substation. An arc flash occurred, causing second- and third-degree burns to the employee's hands and arms. The employee also fell about 4 feet from the ladder, sustaining broken ribs.",1
"An employee was outside doing maintenance tasks when he suddenly experienced symptoms compatible with heat-related illness (increased heart rate, profuse sweating, feeling of lightheadedness, and tingling in arms).",1
"On May 24, 2018, an employee was operating a forklift and struck a stationary coupling tongue from a material transport wagon while turning a corner, breaking a bone in the left leg. The employee was hospitalized.",1
"An employee's knee gave out while he was walking in a parking lot. He fell, breaking his hip.",1
"An employee was using a crane to stand a metal pole piece and coil vertically for installation in the frame. The metal piece slipped out of the coil and fell onto a tabletop, striking two fingers on an employee's right hand and breaking a bone in the middle finger.",1
An employee was loading liner onto a machine when the chuck mechanism pinched a finger. The fingertip was amputated.,0
"An employee was pulling a tractor out of the mud using a second tractor and a winch. The hook of the winch-cable slipped out of place and hit the employee's left thumb, catching it against the tractor resulting in amputation of one phalanx.",0
"An employee was stepping from an overhang to a walkway when he fell, landing on the grass below and sustaining a contusion.",1
"An employee turned around after brazing a piece of copper wire; the back of his upper right arm contacted the hot pipe, and he was burned. He was hospitalized with a blood infection from the burn.",1
An employee was fabricating a honeycomb part on a table saw and contacted the blade resulting in amputation of the tip of his right thumb and a laceration to the underside of his middle finger.,0
"An employee was attempting to un-jam a belt on the machine he operated, using a rod to try to release the belt. His right index finger was caught between the roller and a pin and he sustained a laceration. He was hospitalized for surgery.",1
An employee was drilling a hole when their glove was caught in a chuck. Their left thumb was amputated at the nail.,0
An employee was driving the recycling collection truck and began experiencing stomach pains. He was diagnosed with dehydration and hospitalized.,1
"An employee slipped and fell in a dish room while bringing dirty pots to the sink for washing, dislocating his elbow and suffering a concussion.",1
An employee was sucking bark and debris from a water tank when the hose clogged. The employee attempted to remove the clog and his arm was sucked into the hose up to his shoulder. He was hospitalized for a bicep injury.,1
An employee suffered third-degree burns to their hand while extinguishing a fire.,1
An employee was cleaning the rollers on a running rolling machine with a rag when their right hand was caught between two rollers causing a laceration and abrasion to the right hand.,1
"An employee was removing a piece of plywood from a container when a sliver penetrated their glove, injuring a finger. The finger swelled up, and the employee was hospitalized to treat the infection.",1
An employee was operating a pallet jack and got a foot stuck between the pallet jack and the wall. He suffered a broken ankle.,1
"An employee was repairing a lawnmower. The mower was running, and its belt caught their right middle finger.",1
"At 7:08 p.m. on May 24, 2018, an employee was driving a pallet jack near the heavy pack conveyor. he stepped backward off of the moving pallet jack as it simultaneously veered towards the conveyor. The pallet jack struck the conveyor and pinned his left lower leg between the jack and the steel conveyor causing a severe laceration to his lower leg.",1
An employee was operating a deep fryer when a lighter fell out of the employee's shirt pocket into the fryer. The hot oil melted the casing on the lighter causing a fire and explosion of the hot oil that  resulted in burns to the employee's face and neck.,1
"An employee walking to work near the parking garage tripped on the pavement and fell, fracturing her left femur.",1
"An employee was clearing a jam on a waste chipper's conveyor using a pry bar. The bar kicked back, striking his face and breaking his jaw. He was hospitalized.",1
"A forklift was used to turn a rudder while an employee's hand was on the rudder stop. The tiller (attached to the rudder) pinched his right middle, ring, and little fingers against the stop. The fingers were amputated.",0
"An employee lost balance and fell while turning away from a workstation on wheels, fracturing her right wrist and right hip. She was hospitalized, requiring surgery.",1
"An employee was sitting at her desk when she had an adverse reaction to roofing fumes that came through the vents, experience itching eyes, chest tightness, shortness of breath, a headache, and coughing.",1
"An employee fell from a ladder to the concrete floor while descending from an elevated position, suffering a broken hip.",1
"An employee was struck in the back by a piece of a stainless steel organic solvent container that became over-pressurized and burst, suffering back lacerations. The container had at least 200 pounds of pressure and was full of liquid nitrogen at the time.",1
"An employee was at a residential house cleaning windows. He climbed a ladder onto a wet metal roof with tools in hand to clean a second story window. He then slipped and fell to the ground, breaking his right tibia and fibula.",1
An employee fell while operating a demolition saw and cut his arm.,1
"An employee was hooking blinds on an elevator lift for assembly. When the lift was lowered, the employee's left ring finger was next to a stop and was partially amputated.",0
"An employee backed their forklift into a storage rack. The rack's bottom shelf passed over the lip of the rear of the forklift, striking and fracturing the employee's right foot.",1
An employee was stepping from a ladder to a roof when he fell to the ground. He suffered a broken bone and was hospitalized.,1
An employee slipped on a plastic mail placard that had fallen from a mail tub and fell resulting in a broken right elbow and two torn ligaments.,1
"An employee was riding on a machine when his right foot was caught between the machine and a wall, sustaining a fracture and laceration.",1
"An employee slipped inside the cafeteria and fell to the floor, breaking her wrist and requiring surgery.",1
An employee was operating a machine and sustained a finger laceration that resulted in medical amputation of the fingertip.,0
A mechanic was opening the slide gate of a plastic extruder machine when the heat zone element overheated the plastic up to 900 degrees instead of 400 degrees. The hot plastic sprayed out and onto a different employee who was approximately 10 feet away. The injured employee suffered burns to the arms and face.,1
An employee was hospitalized after being struck in the back by a pitch.,1
An employee was cutting potatoes with a manually powered slicer and amputated the tip of his left middle finger.,0
"An employee fell while climbing freight, dislocating his ankle.",1
"An employee was climbing a ladder with equipment. He fell, landing on his feet 4 feet below; then he lost his balance and fell backward, hitting his head on the concrete ground. He was hospitalized with a skull fracture.",1
"An employee was replacing a roller on a conveyor. The conveyor started up, catching the employee's right hand (which was lacerated) and arm (which suffered a fracture).",1
"An employee was working on a utility pole from an aerial lift bucket. He fell from the bucket to the concrete sidewalk below, suffering a laceration to his head, a fractured shoulder, and broken ribs. Fall protection equipment was not worn at the time of the incident. In addition, the safety chains on the door to the aerial lift bucket were not engaged.",1
"The injured employee was operating part of the paving machine near a roller machine. The roller was being repositioned when it lunged forward instead of reversing. It pinned the injured employee's left leg between the roller and the paver, severely lacerating the leg from the thigh to the top of the ankle.",1
An employee was crossing from one side of a work site to another side in a work gator when he was struck by a pickup truck. The employee was hospitalized for a head injury requiring surgery.,1
An employee was climbing a pole during training evaluations when he suffered a heat-related illness.,1
An employee was removing jammed wood when their hand made contact with a rotating blade. Two of their fingers were amputated. The blade was guarded at the time.,1
An employee was taking the pin out of an outrigger plate when his fingertips were caught under the plate and injured.,1
An employee was closing an office door and caught a finger in the door jam resulting in amputation of the fingertip.,0
"An employee was operating a drill press when the bit made contact with a cable, amputating a finger.",0
"An employee was digging a trench. The employee stood up, got dizzy, and lost consciousness resulting in hospitalization for heat stress due to dehydration.",1
"At 3:00 p.m., an employee was cutting a tree from the ground. A tree limb separated and rolled back on him, breaking bones in his hip, ribcage, and chest. He was hospitalized.",1
"An employee was loading a van. He bent to pick up his cane from the ground and fell, breaking his leg. He was hospitalized.",1
An employee was cutting fish when the blade sliced off the pad of his left middle finger.,0
"An employee was unpacking doors from a pallet. As a door was being removed, the remaining doors separated from a wood support, tipped, and knocked him to the floor. His shoulder and chest were injured.",1
"At about 3:30 p.m. on May 25, 2018, an employee was in a cell renewal building, hydroblasting deposits from a cell body. A 4-foot section of hose connected to the blasting gun ruptured in the palm of their left hand, causing a laceration.",1
"A caster operator was removing a safety blank while wearing heavy welding gloves to insert a smaller nozzle in a casting tundish holding molten steel. The blank fell onto the top of the shroud, causing the molten steel to splatter onto his flame-resistant clothing and metatarsal safety boots. He suffered second- and third-degree burns to his lower legs and feet.",1
"A temporary employee was in a roll-off dumpster, breaking down empty cardboard boxes. He stepped backward out of the dumpster with his left foot. When he turned to put his right foot down, his left knee twisted and was dislocated.",1
An employee was stocking milk cartons in a dairy cooler when he felt a strain in his back. He was hospitalized for hernia surgery.,1
"A waitress picked up a glass and it fell from her hand, breaking. A piece flew into her right eye. She was hospitalized.",1
"An employee was observing pressure line testing, heard a hissing sound, stepped back to observe and fell into steel rebar. The employee was hospitalized for puncture wounds and internal bleeding.",1
An employee was hospitalized due to heat stroke after working in the equipment yard breaking down equipment.,1
"An employee was struck by a forklift's forks, suffering a broken ankle.",1
"An employee was on his bicycle, maintaining a bike trail. He fell off the bike, sustaining an injury to his colon. He was hospitalized for surgery.",1
"An employee was standing next to a pile of reinforcing steel. A bundle of the steel slipped off the pile, striking the employee's lower left leg and breaking a bone.",1
A bindery operator's finger was caught in a belt and pulley while pointing to the reflector on the line. The tip of his right index finger was amputated.,0
"An employee was cleaning between two CNC machines while they were operating. One of the tables struck the employee, injuring their left arm between the elbow and the hand.",1
"An employee was cutting trim with a table saw. While he was using a ""push stick,"" his left index finger contacted the sawblade. The blade amputated his fingertip.",0
"An employee was in a freezer, standing on a two-step ladder. The employee reached for a box, lost balance, and landed flat-footed. The employee's left knee was hyperextended and sustained a fracture.",1
"An employee slipped, fell, and injured his knee while turning to exit an open trench.",1
"An employee was pulling a piece of plastic off a bale of paper products at a loading dock. As the plastic broke free, he lost his balance and fell through the chain across the dock, landing on the ground about 2.5 to 3 feet below. He suffered multiple fractures to his shoulder and lower back.",1
An employee suffered an asthma attack at work triggered by excessive heat in the building.,1
"A nursing assistant had just moved a patient. She stepped away and to the side, tripped, and fell. She sustained fractures to her left radius and ulna (the radial fracture requiring surgery), as well as her left tibia/patella.",1
An employee was mowing grass using a riding mower and struck a tree. The employee was hospitalized for a concussion.,1
"An employee was exiting the back of a semi truck trailer. They stepped down and their right ankle rolled on the rocks, suffering a dislocation.",1
"An employee was descending an extension ladder carrying a power tool. As he stepped down to the concrete floor, he slipped off the last rung, falling on his right elbow and fracturing it.",1
An employee was stung by a bee and suffered an allergic reaction including arm and hand swelling. She was hospitalized.,1
An employee sustained a broken ankle after getting caught in a fence.,1
"An employee was climbing onto the dump truck to tie down trash, slipped and fell to the ground sustaining a head injury.",1
"An employee was using an abrasive blaster when its hose caught on the platform he was working on. The blaster turned on the employee, and its steel shot caused an abrasion below his chin. The dead man's switch on the blaster had been disabled.",1
"An employee was testing a gas-powered weed-eater when its blade disengaged, cutting through their footwear. They suffered lacerations to the second, third, and fourth toes on their right foot; the second toe was lacerated to the bone.",1
"An employee was walking down stairs when he fell, landing on the concrete below. He suffered detached patellar tendons on both knees and was hospitalized.",1
"An employee was walking through a maintenance area that was being hosed down. He slipped and fell to the cement floor, breaking his left leg in two places.",1
"An employee was cleaning around an internal diameter blasting machine before the end of his shift. The arm of the in-feed loading table had a steel pipe staged on it; the arm lowered, causing the pipe to roll into the employee and pin him between itself and another pipe. He sustained contusions around his midsection.",1
An employee was grooming a dog when she got a hair splinter in her arm. The area became infected and the employee was hospitalized.,1
"At 2:00 p.m. on May 26, 2018, a city mail carrier began vomiting after completing a route. The employee was hospitalized for heat exhaustion.",1
"An employee was standing on a ship, waiting to perform a lashing operation. A steel locking shoe fell from above, striking and breaking the employee's forearm.",1
"On May 26, 2018, border patrol agents were pursuing two people. At about 5:40 p.m., one of the agents had run out of water and was not feeling well. He had become dehydrated and exhausted from the extreme heat (suffering a heat-related muscle injury).",1
"An employee was changing a tire on a tractor. While the tire/wheel was on a truck crane, it slipped, pinching the employee's left ring finger. The fingertip was amputated.",0
"An employee was loading a part into a CNC machine. While stepping down from the 4-inch machine platform, he lost his balance and rolled his ankle, sustaining a lower leg/ankle fracture.",1
An employee was attempting to remove dough from a slot in the dough hopper when the donut press sheared off his fingertip.,0
"On May 26, 2018, an employee was removing a truck tire from overhead. The tire fell, bounced on the ground, and hit him on the shin. He was hospitalized and underwent surgery to remove a severed internal artery.",1
An employee was filling a nurse tank with anhydrous ammonia. The employee noticed a small leak coming from the fill coupling and attempted to tighten it. The coupling popped off and the employee was exposed to anhydrous ammonia and was hospitalized.,1
"An employee was talking to patients. Two of the patients got into an altercation and one fell backward, landing on the employee. The employee fell to the ground, sustaining a hip injury.",1
"An employee was unscrewing a 2-inch iron elbow from a 2-inch iron straight pipe. The pipe shifted, and his left index finger was pinched between the elbow and the pipe. His left index finger was amputated at the first knuckle.",0
"An employee was standing on some small pipes, lining the flange on the top of a pump skid on a foundation about 3 feet high. He lost his balance and went over the side of the skid, fracturing a vertebra in his neck.",1
An employee was closing the gate of a cardboard baler with her right hand. The gate closed onto her left hand. Her middle finger was amputated.,0
"An employee was attaching a wireline tool to a metal dolly after the tool had been lifted out of a well hole. The tool shifted on the dolly. The employee's right thumb was pinched between the tool and the dolly, and the end of the thumb was cut off above the first knuckle.",1
An employee was repairing an auger when debris punctured his foot through the boot. He was hospitalized to treat an infection.,1
"An employee was outside, washing out a trash can using a water hose. As she walked away, her foot was stuck in a hole in the ground and she fell, breaking her left ankle.",1
"An employee was un-securing loaded carts for removal by trailer. The employee grabbed a cart on the crossbraces to pull it forward, and the brace cut the employee's right middle finger at the first joint.",1
"A rural mail carrier tripped and fell in a customer's driveway, suffering a broken hip.",1
"An employee was using a torch to melt brazing weld on a copper line. An unexpected release caused a fire, and two employees were burned. One employee was hospitalized.",1
"An employee was bitten by an insect while working on a cable TV connection box. The bite became infected, and the employee was hospitalized.",1
"An employee was operating a lathe. The lathe caught the employee's glove, amputating the right little finger at the second knuckle.",0
"An employee was in an underground electrical vault, splicing a damaged electrical cable. A different 12-kilovolt cable (not the one being repaired) had an arc fault. The arc flash caused first-degree burns to the employee's face and second-degree burns to both hands.",1
"Throughout the day, the employee was driving a scooter and delivering 6-foot tables and chairs to booths. While standing next to another employee and discussing the daily tasks, the employee suffered a cardiac event and collapsed.",1
"An employee had just clocked into work. She was walking across the floor carrying a tote (to return it to another area) when the tote struck her leg. She fell to the floor, suffering a broken hip.",1
An employee was trying to access a ladder from the roof of a building and fell to the ground about 13 feet below.,1
"A forklift operator was operating a forklift, moving empty wood pallets to the back of a building. The forklift's wheels went off of the blacktop and onto the dirt ground; the forklift went down a slight downhill grade and tipped over. The employee was hospitalized with broken ribs and lacerations to the hands that required stitches.",1
An employee was coping an SDL bar on a fixed router table. The tip of his left little finger was amputated.,0
"An employee was carrying a pallet on an order picker. The pallet caught on the leg of a storage rack and kicked back, striking the employee's thigh and breaking the femur.",1
"After the day's physical training, a firefighter was hospitalized for heat-related illness and muscle injury due to exertion, altitude, and possibly dehydration.",1
An employee was using a router table. The router bit amputated about 3/4 inches of the employee's right middle finger and lacerated two other fingers.,1
An employee was driving a forklift when his ankle was crushed. He was hospitalized.,1
An employee doing maintenance indoors became ill and exhausted. He was hospitalized and treated for dehydration.,1
An employee was driving a stand-up forklift down the aisle of a pallet staging area. The forklift showed an error code and started to slide away from the aisle. The employee's right hand was pinned between the forklift and a rack beam causing a deep laceration that required surgery.,1
"An employee was walking across a floor that was being stripped and waxed when he slipped and fell, hitting his face and losing consciousness. He was hospitalized.",1
Two employees were inspecting a 3-way actuated ball valve that was not working properly. One employee went to the control room to switch the valve position in a different direction. The injured employee's left index finger entered the valve and the valve closed on his finger causing a fingertip amputation.,0
An employee was standing on the step of a garbage truck when another garbage truck tried to squeeze between the truck and a car and struck the employee. The employee suffered pain on the left side of the entire body.,1
An employee was lowering a vehicle on a jack when his finger was caught between the jack and vehicle resulting in an amputation.,0
"An employee was removing a gutter system from the back of his work truck when he slipped and struck his right knee on the truck bumper, suffering an abscess that became infected.",1
"On May 29, 2018, an employee was performing routine maintenance on a rooftop A/C unit when the employee's left glove came in contact with the belt and pulley, which then pulled in the employee's left hand, causing an amputation of the left middle finger.",1
The injured employee was at the hand wash sink. Another employee went behind her and fell backwards lacerating the injured employee's upper left shoulder with a knife.,1
"An employee was helping a carpenter put up some concrete forms. He was installing anchor bolts when he started having cramps in his feet, legs, and arms due to dehydration.",1
An employee was attempting to remove a spare tire carrier from underneath a minivan that was elevated by four wheel stands when the minivan shifted off the front loader forks and struck the employee's face and shoulder. The employee suffered a fractured eye socket and left-side collar bone and lacerations to the head and face.,1
"An employee was doing preventative maintenance on a conveyor. After applying oil to the chain and sprockets, the employee used a rag to clean up spilled oil. The rag and the employee's right middle finger got caught in the chain and sprocket. About 1/4 inch of the fingertip was amputated. The machine was not guarded at the time.",0
An employee was stocking shelves and suffered a heart attack. The employee was hospitalized.,1
An employee was diagnosing an issue with a trailer lift gate when his right ring fingertip was caught and amputated in the lift gate's pinch point.,0
"Two employees were cleaning rubber out of the inside of a grinder. One employee (the operator) was manually rocking the grinder blades to free the material while communicating to a temporary employee when to reach into the machine to remove the scrap rubber material. The operator rocked the machine while the temporary employee's left hand was in the grinder, and the blades amputated the employee's left ring fingertip.",0
"On May 29, 2018, the injured employee was standing between two automated guided vehicle (AGV) train cars adjusting a crate. Another employee drove alongside the injured employee's AGV in his own AGV. Cargo on the second employee's AGV struck a car on the injured employee's AGV train. This caused the cars to fish tail and the injured employee's left leg was caught between two cars fracturing the fibula.",1
An employee was positioning an overhead crane's suspended load onto cribbing when his fingertip was caught and amputated between the load and the concrete floor.,0
An employee was wrapping a pallet by hand when he fell and fractured his lower back.,1
An employee was working from a 6-foot step ladder to install a shelf onto a wall used as a clothing display when the employee lost balance and fell to the floor. The shelf the employee was attempting to install landed on and broke the employee's right leg.,1
"On May 29, 2018, at approximately 9:00 a.m., an employee was on board a cargo vessel tending loading spouts when the employee leaned against a man cage. The man cage fell on the employee causing a fractured tibia.",1
"An employee was approaching an intersection on a fifth wheel and struck another fifth wheel, suffering blunt force trauma and internal injuries.",1
"An employee was operating a press machine when the employee's left hand entered the point of operation, amputating the middle fingertip.",0
"An employee was troubleshooting a sewing machine's feeder belt that was not moving when his right ring and middle fingers went between the belt and the pulley and the machine started, amputating his right ring fingertip. The machine was not locked/tagged out at the time.",0
An employee was loading a forklift into a trailer when it overturned.,1
"While moving from an aerial lift to a roof, an employee slipped on roofing material. The employee fell to the ground more than 16 feet below, breaking bones in their left arm.",1
An employee was on a roof applying valley tin. The employee slipped on the valley tin and fell approximately 20 feet to the ground. The employee sustained lacerations to the face and arms. The employee's lanyard was unhooked at the time.,1
"An employee was cutting a short piece of flat bar on a chop saw when the saw came down on his left thumb, amputating the tip.",1
"While walking down stairs, an employee missed a step and fell, suffering severe back and shoulder injuries.",1
An employee was installing a piece of sheet metal in the CNC press brake and suffered a finger amputation.,0
"On May 29, 2018, an employee grabbed her sweater next to her desk and put it on. Upon doing so, she felt something on her elbow and realized she had been bitten by a spider.",1
"An employee was removing an old kitchen countertop when the countertop broke and fell on his right leg, lacerating the skin. He was hospitalized and required stitches.",1
An employee was operating a walkie rider while trying to reach a pallet on a rack when the employee's left hand was caught between the walkie control and the racking. The employee suffered a left middle fingertip amputation and a fractured finger. The employee's index finger required stitches.,0
"An employee put blocks on an 18-wheeler trailer and was climbing down when he fell approximately 6-8 feet and hit the concrete floor with his head, requiring hospitalization.",1
An employee was disassembling wooden pallets when his left hand went into the rotating circular band saw. The saw blade amputated his left thumb and finger behind the fingernail. The employee was hospitalized.,1
An employee suffered a needlestick on her left index finger while using a syringe to subculture a pathogenic culture. The wound required surgical debridement.,1
"A backhoe operator was exiting the cab of the backhoe when his wedding ring got caught in the door handle. When he stepped down, the momentum caused injury to the left ring finger that required partial amputation at the hospital.",1
"An employee was working on a three-phase distribution power line, made contact with the line and suffered electrical burns.",1
"The employee was performing geotechnical and environmental drilling services using a truck-mounted drill rig as well as common drilling tools such as drill rods, bits and samplers. The employee suffered from dehydration and heat exhaustion. The employee was hospitalized.",1
An employee was attempting to unclog a rotary airlock feeder. The valve cycled while the employee's right hand was in the point of operation resulting in amputation of the index finger. The airlock feeder was not locked out at the time of the incident.,0
"While pushing a cart on a walking platform, an employee slipped and tried to hold onto the rail before falling 4 feet to the ground. The employee fractured an ankle.",1
"On May 30, 2018, at 5:30 p.m. an employee was working from an elevated table to remove a metal casting. While removing the metal casting, the employee felt light headed and was hospitalized for heat-related illness.",1
An employee was hospitalized for dehydration during their shift.,1
An employee was slicing boneless round steaks on a meat saw and amputated the right index fingertip.,0
"An employee was removing a 1600 lbs. die from a flanging machine. The employee had removed 4 of 6 bolts. The final two bolts failed, and the die fell, striking the employee's leg and briefly pinning it against the wall of the machine pit. The employee was hospitalized for treatment of lacerations and fractures to his right knee/lower leg.",1
An employee was setting up the machine for a reverse tamper when the chuck pressed his left index finger against the flange resulting in an amputation between the second and third knuckle.,0
An employee was standing beside a machine on the floor when a reversing forklift struck the employee and ran over his leg. The employee's lower leg and foot were fractured requiring hospitalization.,1
An employee suffered an injury while conducting normal duties on a well servicing rig.,1
An employee was working with a table saw when it amputated part of his finger. The saw was unguarded at the time.,1
"An employee was working on an extension ladder that was being held by another employee cutting old wire off a pole. When the line was cut, the wire struck the employee on the ladder causing the employee to fall approximately 14 feet off the ladder. He fell onto a portable toilet and then onto asphalt. The employee sustained a six-inch laceration to the back of the head, broken ribs and fractured vertebrae in his back.",1
"An employee finished mowing the lawn and was pulling the lawn mover onto a trailer when he fell back into the trailer, suffering a broken rib and a partially collapsed lung. He was hospitalized.",1
"An employee was operating a hand saw to cut a 2"" x 4"" board when it slipped and cut the last three fingers on his left hand, resulting in amputation injuries.",0
"An employee was descending a ladder from a roof where he had been removing shingles. The ladder, which was set on a tarp on the ground, slid and the employee fell to the ground. The employee sustained a right ankle fracture and two fractured vertebrae.",1
"An employee was working from an elevated platform, 35 feet high, while wearing a harness and retractable lanyard, to change out a gear on a paper machine. He fell from the platform an estimated 2 feet before the fall protection system caught him. He sustained some leg pain possibly due to the fall protection. He was hospitalized.",1
An employee was cutting steel bars on the ironworker machine. The end of a bar raised up and amputated the employee's middle fingertip.,0
An employee was trying to repair the winch line on a crane. The cable on the winch got twisted. The injured employee was on the base of the boom and was holding the cable from an access hole when the boom retracted all the way back smashing his right middle finger. The fingertip was amputated.,0
"An employee was standing on an 8-foot A-frame ladder taping insulation to a duct. His shirt got caught on something and as he tried to wiggle free, he lost balance and fell off the ladder feet first. The impact with the ground fractured the employee's left foot.",1
"An employee weighed and placed a drum of material onto a pallet and released the drum grabber fixture from the drum. As the employee began walking and repositioning the hoist with the remote control pendent, the hoist released from the beam and struck a drum causing impact with the employee's left leg. The employee suffered a fractured left leg and foot.",1
An employee was using the pull cord to start the air compressor when the cord snapped and he fell approximately three feet off the service truck. The employee sustained lacerations to the face as well as head and arm numbness.,1
An employee was checking the progress of waste being ejected from a walking floor trailer when a pressurized hydraulic hose blew apart. The employee's lower leg was lacerated.,1
"An employee was working on a junction box when an arc flash or electrical shock occurred, injuring the employee.",1
An employee tripped over a protective bollard and twisted his body and knee while falling to the ground. The employee sustained a fractured left tibia and was hospitalized for treatment.,1
"An employee was hospitalized for heat stress after experiencing severe cramping in his legs, arms, and abdomen.",1
An employee was greasing the chain on a running conveyor belt. Their left hand fingers were caught in the conveyor/chain resulting in amputation (past the fingertip) to three to four fingers.,0
An employee was entering the paint booth and was closing the door when the negative pressure of the paint booth caused the door to close quickly catching the employee's left ring finger and amputating the fingertip.,0
"An employee was stocking product on racking using a reach truck. When he returned to ground level, a second reach truck struck the employee resulting in a foot laceration.",1
"An employee was going back through and tightening bolts on the girt that was recently placed. While sitting on and tightening a girt, a bolt snapped causing the girt to slide down. The employee's left leg was pinched between the girt and beam. The employee was hospitalized with a leg fracture.",1
An employee was in a walkway and was struck by the rear of a forklift that was making a left-hand turn. The employee was hospitalized for a hip injury.,1
"An employee was making a feed mill delivery at a customer location and squeezed his body into a gap between the semi-trailer and the loading dock before climbing into the back of the semi-trailer. Afterwards, the employee began experiencing upper body pain. The employee was hospitalized for a hernia.",1
An employee was folding a table when she tripped and fell on her hip.,1
"An employee was decking on the 53rd floor while standing on a joist supported by props. He lost his footing and fell 7 feet, hitting a plumber stack and breaking his left tibia.",1
"An employee fell to the ground while working, suffering broken ribs and vertebrae that required hospitalization.",1
An employee was walking from a vehicle to the work site when a powerline fell on the employee's truck and the yard and shocked the employee. The employee suffered electrical burns on the feet and lacerations to the head.,1
"An employee became hot and dizzy while working at a machine, potentially due to heat stress.",1
"A temporary employee walked up to a palletizer that another employee was operating. The palletizer was being lowered when the first employee's foot was caught under the machine, amputating the left big toe and partially amputating the middle toe.",0
"An employee slipped while operating a push mower, and the employee's right hand fell beneath the mower, amputating the index fingertip past the nailbed.",0
"An employee was walking in the warehouse when a forklift operator backed into the employee, causing a de-gloving injury to the left posterior leg.",1
"An employee was struck by a tool while performing hydrostatic testing on a work-over rig. The tool impaled the employee, who required hospitalization and surgery.",1
"On May 31, 2018, an employee fell while climbing a ladder out of a grain leg boot pit, fracturing the left heel and requiring hospitalization.",1
An employee was replacing the cover on a machine when his right index finger was caught and partially amputated in a chain and sprocket.,0
"An employee was using a tread machine when it became stuck, causing the handle on the tread machine to spin and pinch the employee's left index finger between the machine and the bumper of the truck next to him, resulting in an amputation.",1
"An employee was placing a post when his left ring finger was caught between the post and an excavator bucket, amputating his fingertip.",0
"An employee fell backward while walking up stairs, and the employee's head struck the floor.",1
"An employee was turning around after getting supplies from a cabinet to attend to a patient in a dental chair when the employee's foot became caught in hoses/tubing/the cord under the dental chair. The employee fell, striking the floor and countertop. The employee suffered left kneecap fractures and a chin laceration.",1
"An employee was trying to repair a cable on a box trailer door when the 
cable snapped and the trailer door closed on his right thumb, causing an amputation.",1
"An employee was using a 52"" mower to mow native grasses. He heard a popping sound and the mower caught fire, spreading to his clothing and causing burns to his skin.",1
"After spraying a field with pesticides, an employee was preparing to drive the sprayer back to the facility. The employee had to fold the booms to leave the field, and an outrigger breakaway weld had broken on one boom, requiring manual effort to fold it. The employee was using a ratchet strap to help fold the boom when the employee's hand/fingers were caught in a pinch point, resulting in the amputation of two fingers.",0
An employee was running a load former when the load starting tipping. He was trying to stop it from tipping when the load former's cookie sheet fractured and dislocated a bone in his right hand.,1
"On May 31, 2018, an employee was standing on a manlift applying dunnage when he began to experience nausea, sweating, and an increased body temperature. He was hospitalized for heat-related illness.",1
"An employee was walking out of the locker room toward the workroom floor when he fell and hit his chin on the concrete floor, sustaining a 1-inch gash on chin. He was hospitalized.",1
"An employee was running casing down. He was leaning with one hand on a slip and one hand on a guide bar that guides the casing down when he reached up and grabbed a roller without realizing it. The roller then rolled over and crushed his right pointer, middle, and ring fingers. Two fingers were amputated.",1
"A temporary employee was cleaning a wrapping machine when the employee's left middle and ring fingers were caught by the crimper bar, amputating the fingertips.",1
"On May 31, 2018, an employee was training another employee on the trim press. The employee was pointing at the part to say what portion of it needed to be trimmed off when the machine was activated while the employee's left hand was in the press, resulting in a partial amputation of the middle finger.",0
An employee's right hand was crushed in an oven sheet line roller.,1
"An employee was attaching a tong to a pipe when his left leg was caught in the tong pull line and the drill string, resulting in a left leg amputation.",1
"An employee changed the regulator on an oxygen cylinder from an empty bottle to full. When the employee opened the gate valve to supply the oxygen, an ignition occurred and the gate valve ejected from the bottle, striking the employee. The employee suffered a fracture and laceration to the right hand and a contusion to the sternum.",1
An employee was using a saw when it cut three of the employee's fingers.,1
"An employee tripped over a vehicle axle that a customer had placed on the floor, suffering a fractured hip.",1
"Employees were putting rebar together with chicken wire at a construction site when one employee became ill and dizzy, requiring hospitalization for heat exhaustion.",1
"An employee was checking in the back of a trailer when metal debris fell and struck the employee's right hand, fracturing it.",1
An employee was cleaning in the service area when he slipped around some equipment. He was not able to move his legs and required hospitalization.,1
"An employee was oiling a conveyor chain when his right index and middle fingers were caught between the chain and sprocket, resulting in amputations.",0
"After stocking shelves, an employee stepped down from a step stool and missed the last step, causing him to fall and break his hip.",1
"An employee was using a chop saw to cut a piece of wood for a window frame when the saw lacerated the employee's left thumb and index finger, resulting in an amputation of the index finger down to the second knuckle.",0
"On 5/31/2018, two employees were holding/restraining a student against a wall. One employee later experienced shortness of breath, abdominal pain, nausea, and neck pain. The employee was hospitalized with a possible aortic tear or aneurism.",1
"An employee climbed the ladder on the back of a water truck to load water into the truck using a fire hose. When the water to the hose was turned on, the employee was startled by the pressure and fell back off of the ladder. The employee fell 7 feet to the ground, suffering a left-side skull fracture, left rib fracture, and L4 vertebra process fracture.",1
"An employee was helping to move a motor when the motor shifted and a piece of metal fell, hitting the employee's left big and second toes. Both toes were amputated.",1
An employee was using a hammer when it struck his left index finger.,1
"On May 31, 2018, at approximately 10:30 a.m., an employee was performing re-roofing operations when he fell from a two-story building, fracturing both of his ankles. He was hospitalized.",1
"An employee was attempting to clean residual oil from a 4 ft X 4 ft plastic tote. The employee put approximately 1 quart of denatured alcohol into the tote and then moved the tote to swish around the alcohol in the bottom. The employee's cotton rag then fell into the tote and it flashed, causing a flash burn to the left side of the employee's face and neck. The employee was hospitalized.",1
An employee was reversing a forklift when he struck a steel cross beam and fractured his vertebrae.,1
"An employee was lifting a hydraulic driller (coring machine) from the ground when he injured his back, requiring hospitalization.",1
"A temporary employee was operating an eccentric slotting machine when he saw a piece of paper caught in the blade and hit the stop button. Before the rotation stopped, his right hand entered the machine. The blade then amputated his right ring and pinky fingers.",0
"An employee was installing gutters on a patio roof. He was transitioning onto the patio roof from a ladder when the structure collapsed. The employee fell 9 to 10 feet to the ground, fracturing his right knee and separating his left shoulder.",1
"An employee was on a lift changing a lightbulb when the lift tipped over. The employee fell approximately 25 feet to the floor, breaking a rib and the L1 vertebra.",1
"An employee was walking down steps when her foot became stuck on a step and she fell, dislocating both ankles.",1
"An employee was climbing a ladder to install cable television when the ladder collapsed. The employee fell with the ladder to the ground, suffering a laceration above the left eye, three broken ribs, and a fractured left wrist.",1
An employee was attempting to remove a die from a machine when the die fell on and crushed the employee's hand.,1
An employee was working at a nurses station. He stood up and struck his head on the corner of a cabinet causing a contusion.,1
"An employee fainted and fell to the ground while putting gas into a vehicle, fracturing vertebrae.",1
An employee was using a rack loader to repair a rack when the rack fell on and injured the employee's right hand.,0
"An employee fell from a track hoe, suffering a broken wrist and shoulder and neck injuries.",1
An employee was cutting a cardboard drum clasp with a reciprocating saw to sample contents when a spark reacted with the contents and burned both of his forearm's and hands.,1
"An employee suffered heat stress and dehydration while driving a package cart, requiring hospitalization.",1
"An employee was bending down to pick up medications. On her way up, she experienced a sharp back pain/strain.",1
"An employee was picking a piece of emery cloth out from between the roller and arbor of a tube cutting machine when the employee's right thumb was caught between the roller and arbor. The employee pulled the thumb back, and the nail and some skin were partially amputated.",0
"An employee was ascending a three-step stairway looking for leaks when the employee's foot became tangled on the first step and the employee fell down 6 inches, breaking a tibia.",1
"A maintenance employee was working on a bailer compactor. He inserted a screwdriver into the chain to give it slack to reset the chain to the sprocket. The screwdriver slipped, and the chain came down catching his left ring finger between the chain and sprocket and amputating a small part of the fingertip.",0
"An employee was on a ladder installing a new aerial cable on a utility pole at a height of 15 to 20 feet when a car caught the aerial cable with its bumper and began pulling it down the street. The employee was pulled from the pole and fell, striking a chain link fence before landing on his left side and also hitting a log that was on the ground. He suffered contusions.",1
"An employee was mixing mortar when a bag fell in the mortar mixer. The employee was attempting to retrieve it when the mixing paddle struck the employee's hand, breaking a finger and causing lacerations.",1
"An employee was running a filter element wrapping machine when a part became lodged in the machine. She was attempting to retrieve the part when the machine cycled and pinched her finger, causing an avulsion to the bottom pad of the right middle finger.",1
"An employee was attempting to load a new paper roll into a machine when the employee's left arm was caught between the roll and the machine, causing puncture wounds and contusion/pinching injuries around the left elbow.",1
"On 6/01/2018, an employee had a heart attack and collapsed after taking care of a patient, requiring hospitalization.",1
"An employee was operating a draw bench when the tube broke, causing it to recoil into and partially amputate the employee's finger.",0
"An employee was cold starting a wire draw machine when his left middle finger was pinched between the dead block and wire, resulting in a fingertip amputation.",0
"After an employee adjusted a loose belt on a conveyor, the operator began using the conveyor again when it balled up. As the employee attempted to remove the ball-up, the employee's right arm was caught in the conveyor belt, suffering multiple fractures and pulling the skin away from the arm between the mid-bicep and mid-forearm.",1
"An employee was standing on some equipment (24"" from ground level) spraying down parts when he lost his footing. He reached out to catch himself when his right-hand pinky finger hit the sharp metal blade on a machine that cuts the feet off of chicken. The joint where his pinky finger and hand meet was dislocated and the blade cut through the area, causing a severe laceration. The machine was locked out at the time of the incident. He was hospitalized and had surgery.",1
"An employee was pulling a pipe from a rack using a tool when the tool slipped, causing her to lose her balance in a backwards motion. While in motion, her foot became caught on a rail (extends approximately 1/2-inch above the surface), causing her to fall on and break her right hip in two places. She was hospitalized.",1
"An employee became ill from dehydration and heat stress while working at a port, requiring hospitalization.",1
An employee was servicing a hydrant truck at a flight line when his finger was caught and amputated between a chain and sprocket.,0
"An employee was training another employee. They had positioned a part being worked on in a press. The ""set"" call was given to ensure everyone knew the pedal was being pressed. The injured employee's hand then slipped on the material and moved under the die. The employee realized his hand was under the die and removed it while the die was coming down. Two of his fingertips were pulled off, while a third finger broke.",1
"An employee was setting up bottles for filling. A bottle fell; while the employee was trying to remove it, their arm was caught and bruised by a depalletizer.",1
"An employee was off-loading a tractor-trailer when his foot became caught between the lift gate and the end of the trailer. He suffered toe amputations and severe broken bones, requiring hospitalization.",1
"An employee was travelling on the dock on his pallet jack and was unable to stop before his hand was pinned between the jack handle and a four-way clamp attachment on another forklift, resulting in a fractured hand.",1
"An employee was walking in a hallway at the clinic when she attempted to step around an electrician's box and her foot was caught on the side. She lost her footing and fell to the floor, landing on and fracturing her right elbow. She was hospitalized and had surgery.",1
An employee was operating a table saw to cut molding for a picture frame when the blade amputated the employee's middle fingertip just above the top knuckle.,0
"On June 1, 2018, an employee was completing a machine job when the blade partially amputated the employee's right index finger.",0
"An employee was pumping out portable potties when he fell. He went to grab the truck to pull himself back up when his finger became caught in a fan on the truck, amputating his left middle fingertip.",0
"On June 1, 2018, an employee was pressing a hydraulic shaft with a manually operated hydraulic press when a piece of metal that had not cleared the press table ejected and struck his left pinky finger, causing tendon damage that required hospitalization and stitches.",1
"An employee was on the third rung of a 10-foot step ladder pulling wire when he fell off the ladder and broke his leg, requiring hospitalization. The ladder had a bad rear horizontal section at the time of the incident.",1
An employee became overheated and lost consciousness while prepping a railroad car to bulk load sugar onto it. The employee suffered from heat stroke/heat exhaustion/heat stress.,1
An employee was loading a baler to compress scape foam for disposal when his left arm was pinched/crushed between the bailer door and the bailer ram.,1
"An employee was on the ground guiding a coconut tree that was suspended by a piece of equipment to position it in a hole. The palm frond touched an overhead powerline while the employee was touching the root and he received an electrical shock, burning his hands and the bottom of his feet.",1
"An employee was discharging a patient when they became violent, hitting the employee in the chest.",1
An employee was repairing an air bag when it exploded and fractured his chin.,1
"An employee was installing a motor onto an assembly using a bridge crane. The stabilizing bolt was removed and the motor swung and struck the employee's face and chest. The motor swung back and struck the employee in the back. The employee sustained a laceration to the face, a broken clavicle and fractured ribs.",1
"A temporary employee was riding a slow-moving truck when it hit a bump and he fell to the pavement, suffering a possible fractured skull, abrasions, and a cranial bleed.",1
An employee was hospitalized due to heat exhaustion.,1
An employee was using an electrical food slicer when it amputated the employee's fingertip.,0
An employee was performing maintenance on a rotary star valve when the valve actuated and amputated the employee's left thumb.,0
An employee was adjusting the height on a mower deck and amputated two fingertips on his left hand when they struck the spinning blade.,0
An employee tripped over a bag and broke a finger.,1
"An employee was positioning a main cylinder on the back of a truck. The cylinder has a hole in it that is to line up with a hole on the back of the truck. Once lined up, a pin is to be inserted to hold the cylinder in place. A pry bar is used to help keep the cylinder straight and prevent bowing. 

The employee used a finger to see if the holes lined up. The pry bar moved and the employee's finger was pinched in the opening where the pin should go. The employee sustained a fingertip injury that required surgery and hospitalization.",1
An employee was carrying an air siren mast when he lost his balance and broke his ankle.,1
An employee was in the process of moving a piece of equipment (pipeline scanning tool) that was attached to a large pipeline. The employee's left hand was in a pinch point when the equipment was engaged. The scanning tool closed down onto the pipeline catching the employee's left hand in a pinch point resulting in lacerations and amputation of the left pinky fingertip.,0
An employee was restraining a patient in the emergency department when the employee experienced chest pain and an irregular heartbeat.,1
The injured employee and another employee were removing a water pump and moving hoses when the ground they were standing on gave way. The injured employee fell forward into the excavation and directly onto the form beam sustaining injuries to the left side of their chest including broken ribs.,1
An employee was working as a bottom pour laborer and became disoriented. The employee was diagnosed with heat stroke.,1
An employee was performing rigging down to move the rig and began experiencing symptoms of heat-related illness including cramps.,1
An employee was driving a vehicle and struck a guardrail. The employee sustained a fractured knee and injured jaw.,1
An employee amputated the left ring finger to the middle knuckle while cutting pork ribs with a meat band saw.,1
An employee dismounted her vehicle to make a delivery and then noticed the vehicle was moving. She attempted to stop the runaway vehicle and fell onto her elbows and knees. The employee sustained a dislocated right elbow.,1
An employee was trying to remove a bag from a conveyor and caught her right hand between the guide roller and the conveyor when her hand slipped resulting in a laceration to the palm and back of her hand.,1
An employee was standing between two digesters drawing a sample from one digester when the hot copper sulfate solution erupted from the other digester and splashed onto the employee's back. The employee sustained third degree burns on their back.,1
An employee was testing electrical equipment with an automated insulation test set and went to grab it and receive and was shocked. The employee sustained electrical burns.,1
An employee sustained a laceration to the right elbow and the back of the head after falling down the stairs.,1
"An employee was loosening bolts on a flange to drain water from a furnace header when he was contacted by condensate, burning his right and left forearms.",1
Two employees were operating powered industrial trucks (individual order pickers) when they collided. One of the employee's suffered a leg injury.,1
A temporary employee was removing safety cones after installing a safety barricade. The employee stepped back and fell down an elevator shaft from the second to the first floor. The employee sustained a collapsed lung.,1
An employee was fixing a belt and pulley and caught their left index and middle fingers between the belt and pulley resulting in fingertip amputations.,1
"An employee was riding a pallet jack down the right side of an aisle. As he passed another forklift on the left side of the aisle, his lower left leg got caught on the edge of the wooden pallet that was on the forks of the other forklift. The employee sustained a fractured left shin.",1
"An employee was cleaning meat processing equipment, tripped and fell. The employee was hospitalized for a left hip fracture.",1
An employee was beginning to remove a cap off of equipment when it flew off and struck the employee in the head.,1
"The headache rack on a forklift had come loose during transport. While unloading the forklift, the headache rack struck the employee on the side. The employee was hospitalized with rib fractures and a punctured lung.",1
"On 6/04/2018, at approximately 1630, an employee exited her car in the parking lot and was walking to the end of her car when a customer's vehicle struck her. She fractured both legs and her right ankle, requiring hospitalization.",1
The injured employee was scanning pumps/piping that were stacked four to five feet high for inventory purposes. The pumps/piping (10 ft. long) rolled down and crushed the employee. The employee sustained compound fractures to the left leg.,1
"On June 4, 2018, an employee was setting up a vinyl extruder when the employee's right middle finger was caught and pulled into the extruder, suffering a partial amputation.",1
"An employee stumbled over a chair and fell to the ground while working a fundraiser event. She broke her left hip and was hospitalized, requiring surgery.",1
An employee tripped on the gap between the dock plate and a trailer and fell to the ground.,1
"An employee was walking on the jobsite, tripped over an elevated manhole and fell to the ground. The employee sustained a broken femur.",1
An employee was feeding a new roll into the web press and caught his right hand between two rollers. He sustained fractures to the right pinky finger and internal trauma to the right hand.,1
An employee was placing a jack stand under a truck. The jack slipped and their right index finger was caught between the jack and the jack stand and amputated.,0
An employee fell off the back of a truck to the ground and fractured a hip.,1
An employee was centering a flange and was struck by a falling clamp resulting in injury to the left hand.,1
An employee was changing a screw driver drill bit while holding a hammer and small pry bar under one arm. The drill activated and caught the employee's glove and the pry bar resulting in amputation of the right index finger at the third knuckle.,0
An employee was placing a sign into the ground and the stake lacerated their left ring finger resulting in a soft tissue amputation.,0
"While removing an old post, an employee's right index fingertip was struck by a hammer. The employee was hospitalized.",1
"An employee was vacuuming, got tangled in the electrical cord and fell to the floor. The employee landed on his left shoulder and suffered a dislocation. The employee was hospitalized for surgery.",1
An employee was installing a safety pin into the locking device on a trailer that was being positioned into a jig. The employee was sliding the safety pin into place while adjustments were being made to place the trailer in the correct position and her left ring finger was pinched between the trailer and the locking device resulting in a fingertip amputation.,0
An employee was walking in the break room and slipped on the floor. The employee hit his chin and was hospitalized for surgery.,1
"An employee was sitting on the edge of a chute greasing the rams of a delivery system. The employee lost his balance and fell into the chute. As the employee fell into the chute, the chute doors closed fracturing both legs.",1
An employee was trying to stop a truck from driving away from the loading dock with an item left inside the trailer. The employee jumped from the loading dock to the ground about three feet below and fractured the left leg.,1
An employee was hospitalized due to burns sustained in a fire.,1
"An employee opened the transformer/fuse drawer and changed two medium voltage fuses while the drawer was de-energized. As the employee began to push the main power drawer (13,200 VAC./1,200 amps) back in an arc flash occurred. The arc blast energy and fire ball came out of the bottom door of the main power drawer and up. The employee was standing next to the main power drawer, on the bottom rung of a four-rung step ladder, when the fire ball engulfed his upper torso. The employee sustained second and third degree burns to his arms.",1
"On June 4, 2018, an employee was operating a mill machine when hot rubber stock would not feed into the rollers correctly. He was attempting to push the rubber stock with his gloved hand when the machine pulled the glove from his hand. A piece of hot rubber then flapped onto his left forearm, causing second and third degree burns. He was hospitalized.",1
"An employee was installing a new side head grinder on a planer machine. He was attempting to straighten the alignment of the machine's lifting shaft when the grinder freed from its position, dropped, and trapped the employee's left middle finger between the lifting shaft and a bolt head. His left middle finger was crushed, and the end joint was amputated.",0
"An employee was injured while working on a mobile scaffold inside of a water tank under construction. While in the mobile scaffold, the employee was struck by a 2X10 piece of lumber from above and hospitalized for a concussion.",1
"An employee was checking an exhaust fan on the roof. While descending from the roof using the fixed ladder, he missed one of the ladder rungs and fell approximately four feet to the concrete floor. He broke his left hip/femur bone and was admitted to the hospital.",1
An employee crushed his left index finger between a pipe and a guard resulting in a fingertip amputation without a bone loss.,0
"An employee was working from a one-tier scaffold to install drywall sheets when he lost his balance and fell, breaking his left leg.",1
"An employee was attempting to wind a hose onto a pneumatically actuated drum. While tying a knot onto the hose with string, the pneumatic drum actuated and applied tension to the string. The employee's finger was caught in the string as it tightened, amputating the flesh off his index fingertip.",0
"An employee was operating a lift vehicle when it became unbalanced and started to roll. The operator attempted to exit the vehicle, but was thrown out. The employee sustained head injuries and broken ribs.",1
An employee was ascending a 20 ft extension ladder to access the roof. The ladder was set on wet concrete ground. It slipped out and the employee fell to the ground and onto his ankle fracturing it.,1
"An employee was cleaning the rollers on a printing press with a rag when the rag was caught in the rollers. His left hand then went into the rollers, amputating his index and middle fingers.",1
Two temporary employees were involved in an altercation and one employee was cut in the rib area by a knife.,1
Two temporary employees engaged in an altercation and one employee sustained a stab wound to the chest.,1
"An employee was troubleshooting a machine when his right index finger and thumb were caught in the tooling clamp, amputating the tips. An energy isolating device was not used during this process.",0
"An employee was walking near the trash compactor, tripped and fell sustaining a bilateral ankle fracture.",1
An employee crushed their right index finger in the back door of a delivery truck.,1
"An employee was delivering marble to a customer using a flat bed truck. The employee was standing on top of the truck and was about to dismount. The employee reached out for the door of the cab, which swung open, causing the employee to lose balance and fall off the trailer to the ground below. The employee sustained a fracture to the spine and injuries to the left arm and shoulder.",1
"An employee was preparing to install sprinkler pipes. While installing the pipe brackets, the beam clamp snapped onto his right index finger crushing it and resulting in amputation.",1
"An employee fell to the ground from the seat of a fork truck and struck the back of his head, requiring hospitalization for bleeding in the brain.",1
The employee was cutting stone on the mini splitter and injured a right hand fingertip resulting in fingertip amputation.,0
"Employees were riding an ATV up a steep incline which caused the ATV to flip backwards and roll down the hill. The employees were ejected from the ATV. One employee was hospitalized for fractured vertebrae, fractured ribs and a broken hand.",1
An employee was on a bakers scaffold taping drywall. The scaffold tipped over and the employee fell 8 feet. The employee sustained a back fracture.,1
"During a training event, a smokejumper clipped a tree with his parachute, resulting in a partially collapsed canopy and a hard impact to the dirt ground. The employee was hospitalized for a hip injury.",1
"An employee was walking behind a roofing tar kettle when the kettle door exploded, causing hot tar to contact and burn the employee's face, back, shoulder, and neck.",1
An employee was sitting down and passed out when he stood up possibly due to heat-related illness. The employee sustained rib fractures and a back injury.,1
An employee was helping to load the log slicer. A log slipped from the log deck crane onto the log slicer and struck the employee's left little finger. The finger was crushed and surgically amputated.,0
"An employee was driving the forklift and encountered a metal post shore in the way. He stopped the forklift, shut it down and attempted to move the post shore. While moving the post shore, his right middle finger was caught within the locking hole causing a fingertip amputation.",0
An employee was checking a water filter and was doused with 180 degree water causing burns to both thighs and knees and the right side of the abdomen.,1
An employee fell at work and was admitted to the hospital for a broken hip.,1
An employee was working on conduit from the elevated basket of a boom lift. The employee's left middle finger was pinched between the elevated basket guardrail and the conduit causing a fingertip amputation.,0
"An employee was walking through the tunnel, slipped on the wet floor and fell fracturing his right knee. The employee was hospitalized.",1
An employee was rolling a piece of drilling pipe when his left pinky was caught under the pipe resulting in a fingertip amputation.,0
"On June 5, 2018, at approximately 2:00 p.m., an employee slipped on soybeans while exiting a flat storage building and his left leg went into the running floor auger resulting in amputation of the left leg. The auger was unguarded at the time of the incident.",1
An employee was transferring equipment from a forklift to a platform and fell approximately six feet off the platform. A drum of mud then rolled off the platform and struck the employee. He was admitted to the hospital for treatment.,1
"An employee was troubleshooting an atomic absorption analyzer when it exploded. The analyzer uses acetylene and nitrous oxide. The employee was admitted to the hospital with contusions to the left arm, legs and lower left abdomen.",1
"An employee was staging product in a 34-degree cooler. He used the platform end of a double pallet truck to move a stack of pallets that were in an area he wanted to use for the staging. While he was pushing the stack of pallets, one of the pallets pushed against a bollard and trapped his leg against the body of the pallet truck, fracturing his tibia.",1
An employee was attempting to install a floor covering over an opening on the third floor of a new construction tri-plex when he fell 19-20 feet through the hole. The employee sustained a hip and brain injury.,1
An employee was unloading a 50 lbs. bucket of powdered grout from a pallet. His feet got tangled in cellophane and he fell to the ground fracturing a hip.,1
"On June 5, 2018, an employee was making moldings with a shaper. His left hand was caught in the shaper, and his left index and middle fingers were amputated.",1
An employee was stacking 50-pound bags on pallets when he became overheated from heat exhaustion.,1
An employee was repairing a pasta cooker and was burned by hot water.,1
An employee working at a residence was hospitalized for heat stress and dehydration.,1
An employee just finished installing a new conveyor belt on the system and was tracking the belt to make sure it was installed properly. The employee lost his balance and his left leg was pinned between the roller and the belt causing a fracture to the lower leg.,1
An employee was cleaning gutters with a leaf blower and fell off the roof sustaining broken ribs and a fractured back and hip.,1
An employee was stepping over a torque machine when he slipped and fell. He sustained a severe laceration to the arm and was admitted to the hospital.,1
An employee was working with a temporary worker installing electrical wiring and lighting throughout a distribution center. An argument and physical confrontation occurred between the two workers. The injured employee had been thrown to the ground by the temporary worker and extended his hand to break his fall. He was hospitalized for a broken wrist that required surgery.,1
"An employee was securing a set of chains to the slip for the blowout preventer (BOP) when the tongs engaged causing the slip to grab pipe and begin to spin. The injured employee's right hand was caught between the slip and BOP, amputating the index fingertip.",0
"An employee was unloading an all circuit container. The metal, middle shelf fell and hit him on the head causing lacerations.",1
"An employee was loading pizza boxes onto a hand cart while standing on an elevated liftgate when the cart became unstable. The employee attempted to stabilize the cart and subsequently lost his balance, falling approximately 3 feet to the ground and fracturing his left ankle.",1
"An employee was unloading cargo off a trailer. The employee removed the retention strap from a pallet leaning against the wall of the trailer. As the employee walked by the pallet, it fell to the floor, pinning the employee's foot between the pallet and the trailer floor. The employee sustained fractures to his foot and ankle.",1
An employee was trying to unjam a case of product in the palletizing machine when the machine cycled and a metal bar came down and fractured his arm. The machine was not locked out at the time of the incident.,1
"While walking up a ramp toward the entrance of a building, an employee passed out and fell face first to the pavement, suffering broken teeth and a fracture jaw.",1
An employee was offloading tools from the pickup truck bed when the tailgate extender fell striking his left ring finger and amputating the fingertip.,0
An employee was pulling a hose that was stuck in mud and when it came loose the employee fell backwards breaking the right tibia.,1
"An employee was loading a parts van for delivery when he tripped over a large box on the ground, breaking his right hip at the top of the femur.",1
"An employee was removing a window tint film using a long handle razor blade. As he was entering the car, he stumbled and the handle of the razor blade caught against the seat with the razor facing him. His right knee struck the razor blade, cutting his leg above the knee.",1
An employee transferred hot chicken stock from a 3 gallon bucket to a larger bucket located on a dolly. The dolly tipped over and the employee was burned on the legs. The employee was hospitalized.,1
"An employee was throwing trash in a dumpster when his ring was caught on material, resulting in a partial amputation of his ring finger.",0
"An employee tripped on the corner of a mat and fell forward, landing on her right side and fracturing her femoral head.",1
An employee was operating a press brake. The employee placed the part into the brake press opening to the backstop and actuated the ram lowering it onto the part. The employee's left hand then slipped forward off the edge of the part and up against the front of the punch where two fingers were pinched between the part being folded upward and the upper die surface. The fingertips were amputated and surgically reattached.,0
An temporary employee was operating a punch press and amputated the left index finger.,0
An employee lost consciousness and fell to the concrete pavement while blowing grass off of the concrete with a grass blower. The incident may be heat-related.,1
An employee was using a magnetic hammer to nail eave flashing when a 2.5 inch nail went through his thumb and into the frame of the house.,1
"An employee was attempting to hoist a cow with a winch. When the winch was activated, the  employee's finger was caught in the chain causing a fingertip amputation.",0
An employee was injured by another employee with a pipe because of an altercation/disagreement at the workplace. The injured employee sustained a right forearm laceration and fracture.,1
An employee was checking the brakes on a cab crane while donned in a safety harness with a 6 ft. lanyard. The employee leaned over a gear box that controls the auxiliary hoist to the crane and his lanyard was caught in a shaft that was turning inside the gear box. When the lanyard was caught it pulled the employee quickly to the catwalk surface on top of the crane. During the fall the employee hit his head and suffered a scapula fracture due to being constricted by his harness. The employee was admitted to the hospital.,1
"An employee was walking down stairs, missed a step, and fractured her left ankle. The employee was admitted to the hospital.",1
"An employee was bitten by a client's dog during an in-home treatment session, requiring hospitalization.",1
"An employee was restraining a student. While the employee was on the floor holding the student's leg, the student kicked which in turn caused the employee's head to hit a door frame. The employee sustained a concussion and spinal swelling/compression.",1
"An employee was working from an extension ladder installing lights on the outside of a building. The employee and the ladder fell approximately 10 feet landing on a concrete sidewalk. The employee suffered a dislocated right shoulder, left distal wrist fracture, left non-displaced radial head fracture (arm), multiple right pelvic fractures, a concussion and laceration.",1
"On June 6, 2018, an employee was walking out of her cubicle when her computer bag's straps caught her feet. She struck her head on the wall, sustaining fractures to her neck. She was hospitalized.",1
"An employee was installing cable services at a customer's home and felt dizzy. The employee sat down, stood up and then lost consciousness possibly due to heat-related illness.",1
An employee lost his footing while climbing down off a crane and fell approximately six to seven feet to the ground. The employee sustained a hip fracture.,1
"An employee was prying precast with a pry-bar when the bar flipped up and struck the employee's face. The employee sustained a fractured jaw, broken teeth and a laceration to the chin requiring stitches.",1
"On June 6, 2018, the injured employee was assisting in rigging up a load of tubing blocks. The equipment operator lowered the rig to pick up tubing blocks. The injured employee's hand was leaning on the blocks and when the load began to lift the injured employee's right ring finger became caught between the blocks and the chain/rig floor amputating it to the first knuckle.",0
An employee was installing a security system and fell off a ladder to the ground. The employee sustained three broken ribs and a bruised kidney.,1
"An employee was loading a deposit into a safe and when she turned the mechanism to load the deposit bag, it caught her hand and amputated part of her left middle finger.",0
An employee was moving irregular carts (in a train format) to the end of a conveyor system and crushed his left pinky finger between two carts. The pinky (from the knuckle up) will be amputated.,1
An employee was setting a meter in the meter bank. The box slipped and the raw edge lacerated the inside of his right arm. The laceration required surgery.,1
An employee slipped off a rung of a ladder and fell 7 to 8 feet to the ground. The employee was hospitalized for a fractured heel.,1
An employee was cleaning a transfer belt and was burned by scalding hot water.,1
An employee was engaged in roofing operations and fell approximately 10 feet to the ground. The employee sustained fractured vertebrae.,1
The injured employee was part of a 6-7 person crew of linemen in a boat assessing a leaning pole in slough due to the weather. One of the poles being inspected slipped out causing the live 7200 V primary line to contact the injured employee's shoulder and ground out through their right leg to the boat/water. The employee was hospitalized for electrical burns.,1
An employee was struck by a reversing vehicle being moved on the lot by another worker. The employee sustained head trauma and an elbow fracture.,1
An employee doing demo work on the third floor of building was struck by falling material from above when the fourth floor collapsed. The employee sustained lacerations to the head and broken teeth.,1
"A piece of sheet metal was hanging from a dumpster and an employee attempted to flip the metal into the container. As he did, the metal caught his right wrist causing a laceration that required hospitalization for surgery to repair a nicked artery.",1
"An employee was in a tree approximately 10 feet up to perform tree cutting. As the employee was descending, the tree fell and the employee fell about 8 feet. The employee sustained an L2 fracture to his back and fractured bones in his left foot.",1
"An employee reached for cases on a second level pick slot, grabbed the product and sat it onto their pallet jack while standing on the pallet jack platform. The employee then lost their footing and tried to catch themselves by grabbing the control handle. The directional control was triggered in the forward direction. Their right foot was struck-by the platform and pinned against a rack leg. The employee sustained a laceration above the right ankle and a crushing injury to the right foot.",1
"Employees were raising a structural steel beam (L 27' x  W 24"" x 104"") when it fell striking the injured employee. They were lifting the beam using a beam clamp and a crane to orient it to slide in place to be bolted up. The injured employee's lower left leg was amputated. The employee also sustained serious injuries to the right leg, a bruised hand and a possible fractured cheekbone.",1
An employee fractured a femur when he lost his balance while climbing over a chain-link fence and fell 2.5 feet.,1
The injured employee was standing next to an I-beam that had been removed from a rebar mat. The I-beam fell to the ground and struck the employee's right foot causing four metatarsal foot fractures.,1
An employee was using a bar to open the manhole. The manhole cover slipped and smashed the tip of his middle finger resulting in amputation.,1
An employee tripped over a document disposal bin and fell breaking her right ankle. She was admitted to the hospital for surgery.,1
An employee was operating a forklift and struck a curb and overturned. The employee sustained a leg injury requiring surgery.,1
"A temporary employee was working at an extruder shear when a plastic sheet became jammed. As the employee attempted to remove it, the employee's thumb became caught in the equipment, amputating the tip between the first joint knuckle and the nailbed. The shear was guarded at the time.",0
An employee was lacing using an oxygen lancer. Concrete was heated by the lance and metal slag shot into the air and contacted the injured employee. The employee sustained burns to the left foot and right hand.,1
An employee was standing on a step ladder to hang a picture. The employee fell from the ladder and broke a leg.,1
Employees were moving a metal ring weighing 578 lbs. from a hydraulic lift table to a work bench when the metal ring fell onto one of the employee's left hand catching it between the ring and the work bench and amputating the ring and middle fingertips.,0
Employees were working on an electrical power outage. An employee received an electrical shock from the left triceps to the right index finger and thumb and was hospitalized for electrical burns.,1
"On June 6, 2018, at approximately 7:15 a.m. an employee was removing the operator's seat from an off-road dump truck to perform maintenance on the seat's air ride suspension. While removing the seat from the cab, the employee lost his footing and fell 6.5 feet to the ground. The employee suffered compression fractures to multiple vertebra and was hospitalized.",1
"On June 6, 2018, at approximately 7:15 a.m., an employee was running the stacker on the brewer line when the employee reached into the notcher head to remove stringers from the machine. The employee's right hand then made contact with rotating parts, resulting in amputations of the ring, middle, and index fingers. The machine was running and guarded at the time of the incident.",0
"An employee was struck by a forklift, suffering fractures.",1
An employee was driving a forklift down a steep slope when it overturned. The employee sustained cuts to the head and arms as well as fractured ribs.,1
"An employee was walking, tripped on a raised section of the floor, and fell resulting in a fractured femur.",1
"The injured employee and a crew were prepping for a prescribed burn by cutting down dead and dying timber. The injured employee dropped a 25"" diameter tree and the tree took an unusual spin on the ground and rolled over his lower leg. The employee sustained a puncture wound, a laceration and a fracture to his left tibia.",1
"An employee was operating a ride-on pallet jack, turned a corner and struck a stack of pallets. The injured worker was operating a powered industrial vehicle on the opposite side and was struck. The injured employee sustained a fractured hip.",1
An employee was carrying a toilet bowl to the dumpster for disposal. It slipped from the edge of the dumpster and shattered. The employee was hospitalized for lacerations to his right forearm.,1
"On June 6, 2018, around 9:00 a.m. an employee parked and engaged the breaks of a loaded forklift on a slight incline and got off the forklift to verify space availability in the cargo van that was being loaded. The forklift rolled forward crushing his legs between the bumper of the cargo van and the material on the forklift causing fractures to both legs. The employee was hospitalized.",1
An employee was setting up for a climb when the worker fell and was injured.,1
An employee was operating a CNC lathe as he polished a part. The part came off the spindle and struck the employee in the forehead and on the left shoulder. The employee sustained a laceration above the left eyebrow requiring stitches and a broken shoulder.,1
"Employees were cleaning rollers on a machine with abrasive pads when one employee's fingers were caught in the rollers. The employee's middle, ring and pinky fingers were crushed.",1
"On June 6, 2018, at approximately 9:30 p.m. an employee was cleaning a roll press when their right hand became entangled in the machine resulting in injury requiring hospitalization.",1
"On June 6, 2018, at approximately 10:00 a.m. an employee's left hand fingers were pinched between the table and the guard of a an up-cut saw, when the saw unexpectedly cycled, resulting in surgical amputation of the fingertips.",0
"On June 6, 2018, an employee partially amputated her left ring finger while operating the manual paper cutter.",0
An employee's right middle finger was amputated while operating a table saw.,0
"On June 6, 2018, at approximately 11:00 AM, an electrician was attempting to remove a termination from a bushing on the transformer when an arc flash occurred. The employee suffered first degree burns to the face and arms.",1
An employee was cutting a lift gate loose from the metal packing cradle. The lift gate shifted and caught his middle finger between the lift gate and the cradle resulting in a partial amputation.,0
An employee was walking and tripped and fell resulting in a fractured arm.,1
An employee was on a step ladder installing a slide lock at the top of the pump house door and fell approximately 10 feet onto the asphalt outside the pump house. The employee was hospitalized for head lacerations and a broken collarbone.,1
An employee was conducting routine maintenance and fell from the sixth rung of an eight-foot step ladder. The employee was hospitalized for a brain bleed.,1
"Two employees were cutting a section of pipe. As the injured employee was cutting the pipe, a 8' x 14' aluminum trench box fell over onto the injured employee resulting in a cracked pelvis.",1
An employee was delivering mail to a residence when a dog broke through the screen door and bit the employee in numerous places on the arm and leg.,1
An employee was loading the chamfer machine with wood and crushed their left index finger between a board and the machine guard. The fingertip was surgically amputated.,0
"Two employees were traveling in a utility vehicle. As the driver made a sharp turn, the vehicle overturned and caught the passenger's right leg between the vehicle and the ground. The employee's right fibula was fractured and lacerated.",1
"An employee was performing drywall work and fell approximately six feet from equipment, landing on the floor and sustained broken ribs.",1
An employee was cutting open a bundle of wooden studs with a knife and severed an artery in his left wrist resulting in hospitalization.,1
An employee was cutting lumber with a computerized saw and amputated his thumb.,1
An employee slipped and fell while walking by the sink in the seafood department. The floor was somewhat damp. The employee suffered a fractured left femur.,1
An employee was installing guardrails on the highway and was hospitalized for heat stress/exhaustion.,1
An employee was testing flashing welds for proper depth and fell approximately 25 to 30 feet through the mid-rail of a guardrail and landed on the ground. The employee was hospitalized for a lacerated liver.,1
"An employee was trimming the edge of the lawn, was startled and stepped back into the mower chute. His legs and feet were lacerated by the mower blade.",1
"On June 7, 2018, an employee was cribbing up a figure eight eccentric wheel block assembly. The cribbing fell as he was tightening bolts with a ratchet and socket, pinching his left hand. His hand was crushed and the employee was hospitalized.",1
An employee was putting on her coat when she tripped and fell to the floor breaking a hip and wrist.,1
An employee was cutting a precast storm sewer pipe. He slipped off the pipe and cut the left side of his rib cage with the saw.,1
An employee was operating a machine and amputated fingertips.,0
The employee had just completed their route and began experiencing symptoms of heat-related illness.,1
"At the job site the injured employee used a vacuum to extract water from one pit, backfilled three small pits, helped coworkers fill two other pits, and then performed sweeping on the road and sidewalk before leaving. Afterwards, the employee began experiencing symptoms of heat-related illness, including vomiting. The employee was hospitalized for heat-related illness.",1
Two reach trucks (stand-up forklifts) collided in the loading dock area while loading semi-trailers. One operator was not injured. One operator was thrown from the reach truck and fractured the right wrist and left ankle.,1
"An employee was operating a lathe to test a 1"" diameter, 6"" long metal part. The part had a burr and the burr caught the employee's glove pulling his fingers into the lathe. The skin on his left index and middle fingers was degloved to the middle knuckle resulting in surgical amputation at the middle knuckle.",0
An employee slipped and fell while walking to the deli department. The employee suffered a broken leg.,1
A crew was slowly bleeding off pressure into the next section of valves when the Kelly hose burst and the hose struck an employee's leg causing a right tibia fracture.,1
"An employee was walking to his vehicle when his knee gave out, resulting in a fall that ruptured his patella tendon.",1
An employee was cutting a hole in a ship hull with a plasma cutter. The steel in the center of the opening fell onto the employee's finger causing a partial amputation.,0
An employee was pumping liquid asphalt from a storage tower to a distribution truck when the employee was sprayed with the hot asphalt resulting in burns to the right thumb and index fingers and the left foot. The valve was not shut down at the time.,1
"An employee was leaving a client's home, slipped on steps and struck an elbow on the concrete. The employee was hospitalized.",1
A delivery driver was unstrapping the load from the semi-trailer when a concrete window sill fell onto his hand breaking bones in the hand.,1
An employee was running the rotary machine and caught his right middle finger in the machine resulting in amputation to the first knuckle.,0
"Two employees were performing a routine inspection of the neutron generator. One of the two workers heard a hissing sound and they detected a leak that could be corrected by tightening a flange bolt. When one of the employee's set the wrench on the flange bolt, the clamp failed and the internal pressure propelled the dome (globe) away from the base and the dome struck the other employee (without the wrench) in the chest. The injured employee sustained one broken rib and a punctured spleen.",1
An employee slipped and fell down stairs and fractured a leg.,1
An employee was moving scaffold equipment while standing on top of a concrete wall. The employee fell backwards to the ground sustaining a bruise and cut to the back of his head.,1
An employee was loading a trailer when she slipped on cow manure and fell onto the trailer floor. The employee was hospitalized for a back injury.,1
"The injured employee was acting as the ""ground man"" and lowering a large tree limb that had been cut. The limb slipped from the rope and fell, striking the employee on the head and causing a skull fracture. The employee was wearing a hard hat at the time.",1
"An employee was performing a shift clean-up on a blend line when his left arm was pulled into the blending rollers. The blend line was turned off, but the rollers were still rotating. The employee was admitted to the hospital with a left arm amputation below the elbow.",0
"An employee was crouched on the ground cutting a piece of stainless steel. A large piece of steel fell from the grapple of a scrap handler, struck the ground and skidded 24 feet striking the employee and causing a fractured right arm.",1
An employee was participating in a live fire training/qualifying exercise utilizing a rifle and sustained a gunshot wound to the left foot causing a compound fracture while transferring the rifle from one hand to the other.,1
"An employee was guiding a dock plate down and crushed a finger between the dock plate and his steel-toed boot, resulting in an amputation.",0
An employee was taking a king pin out of a trailer and fell to the concrete working surface. The employee suffered a fractured hip.,1
An employee was installing insulation and became dizzy. The employee was hospitalized for dehydration.,1
"An employee was standing behind the planer/molder machine operator. The employee reached around the machine operator, grabbed a piece of wood flooring, and pulled it forward into the top cutter head. His right hand made contact with the cutter head resulting in severe lacerations to the third, fourth and fifth fingers. The fourth and fifth fingers were amputated.",1
An employee fell from a belt loader and caught himself with his hand. He fractured his right wrist and required surgery.,1
An employee was flipping a beam in the shop when the beam fell off the horses and struck his right leg causing a fracture that required surgery and hospitalization.,1
An employee was sweeping the road and was run over by a skid steer fracturing both legs.,1
An employee's left index finger was amputated on a bandsaw.,0
"An employee was working at a remote job site delivering chemicals. When he had finished delivering chemicals at that location, he began having a headache. The employee was looking for headache medicine in his backpack and removed a handgun from the backpack placing it on the truck console. When he later reached for the gun it discharged into his left hand. The employee was hospitalized and had surgery.",1
An employee was moving a roll with an overhead hoist. The load moved and struck the operator's hand against the machine causing a fingertip amputation.,0
An employee was working in the iron yard sorting incoming metal scrap at the exit point of the metal shear. The metal shear is located outside and there is a hole through the wall where the conveyor conveys metal scrap into the building where the operator workstation is located. There is a heavy rubber matting that hangs above the conveyor as a safety barrier to protect the employee from potential flying metal. A gap in the heavy rubber matting caused some metal to come underneath the plastic strip and strike the employee on the left side of the neck. The employee was hospitalized for a laceration to the neck.,1
An employee was speaking with the skid steer operator when he became trapped between the loading bucket and track of the skid steer causing a left leg fracture.,1
"An employee was walking into work, tripped and fell onto her right side breaking the right arm.",1
An employee was moving tables after a blood drive. She leaned against a folding table and the table and the employee fell to the floor. She suffered a right hip fracture.,1
"An employee was changing a forklift battery. The battery slipped from the device it was on, fell off the hoist and landed on the employee's left foot shattering it.",1
An employee suffered heat related illness including slurred speech and vomiting while driving back to the office after working all day. The employee was hospitalized.,1
The injured employee was attempting to move a rack of chicken product when the roller that held a roll of plastic wrap fell catching the employee's right index finger between the roller and the frame. A second employee attempted to assist the injured employee and lifted the roller off the employee's hand. The employee shifted their hand and the roller fell a second time. The roller landed on the injured employee's hand causing their right index finger to be caught in the frame resulting in a fingertip amputation.,0
The employee was shadowing on an auto chop saw. He put a piece of wood into the molder and it jammed between the fencing. Other product hit the jammed piece of wood. The employee went to remove the jammed piece of wood and his left pinky finger was pinched between the wood pieces. The employee suffered a partial amputation of the pinky finger on his left hand.,0
An employee was clearing a jam on a panel stacker when several oriented strand board (OSB) panels fell onto her hands causing a laceration and fracture to the left hand and a laceration to the right ring finger.,1
"An employee was installing a water tie-in and walking on cooler panels in the ceiling. The employee stepped on the drop ceiling above the bakery and fell approximately 10 feet. The employee suffered a broken right clavicle, humerus, ribs and wrist.",1
An employee was walking up a flight of stairs at a private residence. The stairs gave way and the worker fell through suffering broken ribs and internal injuries.,1
"An employee was assisting a patient sit up in bed, turned, and got tangled in the alternating leg pressure cord causing her to trip, but not fall. She sustained neck and back strain.",1
An employee was hospitalized after falling 28 feet from an elevated walkway to the ground.,1
An employee was cleaning slag from a vessel containing molten copper. The slag and molten copper splashed onto the employee's left foot burning it.,1
An employee tripped over an open filing cabinet drawer breaking her right arm.,1
An employee was walking through a doorway and caught a heel beneath the door causing her to trip and fall and break the left hip.,1
Three employees were removing attachment pins from a skid steer to remove the bucket. The skid steer bucket fell onto on employee's right foot resulting in five broken toes.,1
"On June 8, 2018, an employee was moving a beam while on a scaffold. The employee stepped off of the scaffold onto a shelf and it collapsed causing the employee to fall 11 feet to the floor below. The employee was hospitalized for a fractured right ankle.",1
The injured employee was installing the last two pieces of decking to the floor of a mezzanine being built within the warehouse. The employee pushed the decking back so that he would have room to cut it and fell through the exposed hole approximately 14 feet to the concrete floor below. He struck steel framing on the floor and broke his arm. He also suffered lacerations to his forehead.,1
"On June 8, 2018, at approximately 12:00 p.m., an employee was attempting to repair a pipe hose on a wheeled fire extinguisher. The employee's right eye was struck with a steel pipe he was using for leverage causing cuts around the eye, swelling and impaired vision.",1
"An employee was walking and tripped over the ground elevation difference, fell and broke the upper right arm.",1
"On June 8, 2018, at approximately 12:40 PM, four employees were moving a truck cab into the paint shop. The truck cab was on a rolling cart. As they were moving the truck cab, a temporary employee got his right hand caught between the truck cab and the paint shop door causing a severe avulsion injury. The employee was hospitalized.",1
"On June 8, 2018, an employee was burned on the face, neck and back after opening a hot oil valve in the browning area.",1
An employee was pressure washing the stage windows from a 6-foot step ladder when he lost balance and fell on the stage's floor breaking his left wrist. He was hospitalized.,1
"An employee was checking equipment and adjusting lines. As the employee was unplugging a plugged line that uses steam, a handle was bumped releasing steam condensate (300 degrees) that struck the employee's chest causing a second degree burn.",1
An employee was on horseback when the horse pitched forward and the employee fell to the ground. The employee suffered four broken ribs.,1
An employee fell 12 feet from a scaffold platform inside of a tank to a lower level of scaffolding while pressure washing the ceiling of a vessel. The employee sustained a right ulna fracture and a left shoulder fracture.,1
"An employee was installing lighting, came in contact with a live circuit and jumped off the ladder after receiving an electrical shock.",1
An employee was cutting water pipes when the saw kicked back and cut the employee's face and chin.,1
An employee was helping a contractor install a swivel and the swivel fell on his hand breaking the left index finger.,1
An employee lifted a box (60 lbs.) and tore a hernia.,1
An employee was on a table when the iron handle on a utility cart struck him. He was hospitalized for surgery.,1
An employee got their left index finger caught between a compressor frame and a skid resulting in amputation of the fingertip.,0
"An employee was standing by a metal plate that was leaning against the wall. A forklift struck the metal plate causing it to fall. When the plate fell, the employee lost his footing and fell to the floor sustaining a right hip fracture.",1
"An employee was working on a balcony about 12 feet high, removing the railing in preparation to work on the balcony floor. After removing the railing, the employee fell to the concrete pavement below. The employee suffered a fractured skull and ribs, broken vertebrae and collarbone and a bruised lung. Fall protection was not worn at the time.",1
"An employee was power washing a roof and fell approximately 30 feet through a sky light. The employee sustained a fractured leg, pelvis and sternum.",1
An employee was working in a semi-trailer placing packages onto a conveyor when one of the packages fell and struck the employee on the head. The employee suffered a possible concussion.,1
"On June 10, 2018, an employee sustained an amputation to the right ring finger when using a meat cutting band saw.",0
"On June 10, 2018, at approximately 3:30 p.m., an employee suffered a partial amputation to the left middle finger while greasing the gears of the power tongs.",0
"The injured employee was operating a forklift to remove pallets of bananas from inside a container. A yard dog operator hooked up to the container and pulled it away from the dock as the forklift was exiting the container. The forklift fell between the container and the dock. As it was falling, the injured employee grabbed the overhead guard supports at the same time the forklift hit the steel ramp, amputating the right hand just above the wrist.",1
"While hand-scrubbing the chute on a vacuum system, the employee's hand entered the vacuum pump chute and his finger was caught on angle iron. When he pulled his finger back, the fingertip was amputated.",0
An employee was preparing to clean an air duct system and fell down a shaft when backing up along the duct system. The employee sustained back and pelvic fractures. A piece of sheet metal duct work at the end of the shaft also lacerated the employee's left hand.,1
"An employee was walking to his office, tripped over a tow motor hook and fell to the floor sustaining a right hip fracture.",1
"An employee was working on the boiler room air conditioner and fell from a step ladder. The employee fractured the right arm and suffered a head contusion, bruising down the right side of his body as well as an abrasion on his left hand.",1
"On June 10, 2018, an employee was clearing a jam in the polybag machine. The machine cycled and the heated pins used to punch holes into the plastic bags amputated the tip of the employee's left index finger.",0
An employee was cutting metal parts with a saw and suffered an amputation injury to the left index and middle fingers. The saw was guarded at the time.,0
An employee tripped over a microwave cord and fell breaking the right hip.,1
"An employee was doing roofing work. As he approached the roof edge, he lost balance and fell 18 feet to the ground. The employee suffered fractures.",1
An employee was changing a tire using the tire machine and sustained a left pinky finger amputation at the base of the nail bed while removing the tire from the rim.,0
An employee was transporting a section of plates from the inspection area to shipping. There was a 1-inch gap created between the top and second plate during the lifting/lowering of the plates and the employee's left middle fingertip was caught in this pinch point.,1
"An employee was moving a metal buggy while getting ready to clean. While rolling the buggy, the employee's pinky finger was caught between the buggy handle and the side of a conveyor resulting in a fractured finger and torn ligament requiring hospitalization.",1
An employee was working on the roof exposed to heat from the sun. The employee was hospitalized that night for dehydration.,1
An employee was using a chainsaw to cut a stump. The saw kicked back and cut the employee's upper thighs.,1
"An employee lost their balance while riding on the machine as the machine slowed to change direction. He stepped backwards onto the front tire of the machine. Since the machine was in reverse, he was pulled down under the machine by the tire causing fractured vertebrae and a leg laceration.",1
An employee was injured while positioning a trough for a well. The trough fell on the employee's right hand resulting in a fracture of the middle fingertip and lacerations to the middle and index fingers requiring stitches.,1
A truck driver with RJ's Transportation was unloading 93% sulfuric acid from the tanker truck to a holding tank at a customer site. Pressure lines failed and acid was released striking and burning the employee. Personal protective equipment (PPE) was not worn at the time.,1
"An employee was disassembling gear boxes. As the employee reached under a load that was lifted by a crane, a bearing fell out and landed on his left hand causing fractures to two fingers. The employee was hospitalized.",1
"On June 11, 2018, an employee was stepping off of a flatbed trailer onto a six-foot step ladder. As the employee stepped on to the ladder it shifted causing the employee to fall to the ground and fracture both ankles.",1
An employee was operating a saw machine and was cleaning the saw dust off the belt using his right hand when his hand got caught in the conveyor belt was pulled into the roller amputating his right index finger.,0
"An employee was pinching a 10"" nitro hose line and the line burst. The hose struck the employee flipping him and breaking his right tibia.",1
An employee's finger was caught in a door resulting in a fingertip amputation.,1
"On June 12, 2018, an employee fell while descending an extension ladder resulting in a broken wrist.",1
The employee was moving a wall partition and cut the end of his finger on the edge of the wall partition resulting in a partial amputation of the fingertip.,1
"An employee was using a concrete pump to repair sidewalks and curbing. The pump could not reach the location where pumping was done and additional hoses were connected. While holding the hose end, he lost control of it and was struck in the head by the hose end. The employee sustained head lacerations requiring stiches and was hospitalized overnight.",1
"An employee was pushing an assembled engine on an engine cart down a conveyor roller rack. As the employee attempted to slow down the momentum of the engine cart, his left index finger was pinched and amputated between the engine cart and a roller on the conveyor.",0
"An employee went around a corner and tripped over a box on the floor, falling to their right side and fracturing their hip.",1
An employee was prepping the ground for a concrete sidewalk and suffered leg cramps. The employee was later hospitalized and diagnosed with dehydration/acute kidney failure.,1
An employee slipped on a grate while walking in a building and fell to the floor. Their hip and pelvis were injured requiring hospitalization.,1
"An employee was using a manual pallet jack to load the delivery truck. The employee moved backwards inside the cargo area while pulling the pallet of merchandise with the manual pallet jack, stepped off the back edge of the box truck bed and fell approximately four feet to the ground. The employee sustained a compound fracture to the left ankle.",1
An employee was helping to load wood crates in the bag boxing area. The employee was caught between a strapping machine and a crate. The employee sustained five broken ribs.,1
An employee was standing on the top step of a 2-foot stepladder to change paint booth filters. The employee fell off the stepladder to the concrete floor and fractured the right hip.,1
"An employee fell off an eight-foot scaffold, hitting a crossbeam and then the concrete ground. The employee sustained a broken rib and three transverse process fractures.",1
An employee was installing decking on a mezzanine level. The employee stepped backwards and fell 18 feet through an undecked portion of the mezzanine to the concrete floor below resulting in hospitalization for a concussion. Fall protection was not secured at the time of the incident.,1
"An employee was in the asphalting area applying asphalt to the exterior of a ductile iron pipe, 20 feet in length and was struck by a pipe that was being rolled in the direction of his work station. The employee sustained fractures of the left knee and pelvis.",1
An employee suffered a thoracic lumbar strain while lifting a heavy rock on site.,1
An employee was dismantling a building and fell approximately 14 feet from a truss resulting in back injuries. Fall protection was not attached at the time.,1
An employee was walking through the grass from her car to her office and rolled her ankle. Her right ankle was fractured.,1
An employee was lowering a 60 lbs. lashing rod when it slipped from the employee's hand and fractured their jaw.,1
"An employee was making a delivery at a customer location. While exiting the delivery truck, he missed the step with his foot causing him to fall to the ground and fracture his right elbow.",1
Employees were outside moving equipment and disturbed a wasps' nest. The injured employee was fleeing from a wasp when he tripped and fell to the ground landing on his right elbow. He suffered an arm fracture requiring surgery to repair.,1
"The injured employee was working in the GE plant purging the gas in the building. Work in a 4-foot pit had just been completed and the diamond floor plating over the top of the pit was replaced incorrectly. As the injured employee was walking to check the valve, he fell through the floor plating over the pit. The injured employee sustained a right leg laceration on the corner of the plate.",1
An employee was greasing rolls on the roll former and fractured his fingers in the chain and sprocket.,1
An employee was operating a forklift and went in between a dump truck and another vehicle. The dump truck struck the forklift and the employee's left arm was caught between the dump truck and the forklift and fractured.,1
An employee was driving a logging truck and lost control of the truck. The truck fell onto the shoulder of the road. The employee sustained right shoulder and neck injuries.,1
"An employee was closing the front gate when it came off the track and fell on top of the employee. The employee was hospitalized with a fractured pelvis, compression fractures to the spine and a right rib fracture.",1
An employee was struck by lightning as he was returning to his car to seek shelter.,1
An employee was working in a building on the third floor attic draft stop (9ft 6in). The employee fell landing on his left side and fracturing the left ankle.,1
An employee was clearing a jam in the pelletizer machine and got their right-hand fingers caught in the auger. The employee's fingers sustained deep lacerations.,1
An employee was trying to remove the rent tag off a self storage door. As the employee was pulling on the tag it popped and punctured the base of their right thumb. The tag required surgical removal.,1
"An inmate was slicing a turkey loaf in an electric meat slicer. When the turkey loaf was trimmed down to a small piece, the employee tried to reposition the meat in the running slicer and suffered the amputation of soft tissue and part of the nail on the end of the right thumb.",0
"The injured employee was guiding marble slabs as they were being unloaded from a flatbed delivery truck using a forklift. The forklift picked up two slabs of marble (120"" x 77"") weighing approximately 2,200 pounds. The weight caused the forklift to tilt forwards which in turn caused the booms and slabs to fall forward. The impact of the slabs slammed the employee into the truck. The slabs fell back toward the forklift and injured employee fell on top of the slabs. The injured employee was hospitalized for a fractured jaw and vertebrae in the neck.",1
"An employee was getting out of their car at a client's residence, tripped on the sidewalk and fell fracturing their hip.",1
An employee was installing a receptacle on a live floor box. He was extending the floor box using PVC glue to secure it. The flammable glue ignited with the live wire in the floor box. The employee's left hand sustained second degree burns.,1
"An employee was working in the blow molding area making bottles when the machine jammed. As the employee tried to clear the jam, his index fingertip was amputated by the trimmer.",0
An employee was using a machine and amputated a finger.,0
"An employee was standing in front of the ice cream trailer preparing to load ice cream onto the straight truck. He turned and reached into the trailer to pull out the ramp. At the same time the employee was reaching into the trailer, the truck continued to back up and struck the injured employee on his left side pinning him between the trailer and the straight truck. The employee sustained a lacerated spleen and liver.",1
"An employee was rigging up a piece of equipment when it began to roll and the employee was caught between the equipment and the subframe of a drilling rack. The employee suffered a broken right arm, broken vertebrae and the separation of muscles on the hip.",1
"On June 12, 2018, an employee was installing a gear guard and began experiencing blurry vision and shaking. He was admitted to the hospital for heat-related illness.",1
An employee was attempting to remove the pin of a track on a crawler type crane. The employee swatted at flies (insects) and his right hand was on the track as the crane moved forward. The employee's right hand pinky finger was caught in between the pads of the track and amputated to the first joint.,0
An employee was walking behind a trailer. The trailer backed up and pinned the employee between the trailer and the loading dock breaking bones.,1
An employee was shoveling pellets into a silo toward the auger. Pellets shifted under the employee when the auger was turned on. The employee's right foot was caught in the auger resulting in amputation of the lower leg.,1
An employee was delivering mail and experienced heat-related symptoms. He was hospitalized.,1
"An employee was caught in a rain storm while attempting to button up a roof and fell 26 feet to the gravel surface below resulting in hospitalization for a broken left wrist, fractured ribs and a broken pelvis.",1
An employee was scanning freight and was struck by a forklift resulting in a broken leg and hospitalization.,1
"An employee was cutting a piece of 15"" pipe. When he got to the end of the cut, the pipe pinched, causing the saw to kick back and cut his left shoulder.",1
"An employee said that he was not feeling well and fell to the floor, but did not lose consciousness. The employee was hospitalized for a possible heat-related illness.",1
An employee was attempting to hit a hammer wrench with a sledge hammer and missed.  His hands hit the hammer wrench.,1
"A forklift operator was attempting to move a single stack of pallets (22 high). Behind the single stack of pallets was a double stack of pallets (44 high). As the forklift lifted the single stack of pallets, a pallet in the double stack of pallets became dislodged. The double stack of pallets fell down over the top of the single stack of pallets, over the forklift mast, and onto the forklift operator's cab enclosure. As the pallets fell onto the forklift, the forklift operator reacted by putting his hands up and his fingers went through the grated enclosure. A falling pallet struck and severed the employee's right ring finger.",0
"An employee was installing a metal roof on a building, lost footing, and fell to the deck. The employee slid approximately 16 ft on 4/12 pitch roof. The employee then fell off the roof edge 13 feet to ground. The employee sustained a fractured L2 vertebra and a fractured wrist.",1
An employee had finished his trash collection route and started having cramps. He was hospitalized for dehydration.,1
An employee was running a machine that dresses a form on a grinding wheel. The employee was cleaning off the grinding wheel when their right index finger was pinched between the grinding wheel and the dressing wheel amputating it at the first knuckle.,0
"An employee was using a pry bar to lift a manhole cover. The manhole cover slipped and fell onto the employee's left middle finger, crushing the fingertip. The fingertip was amputated.",0
"An employee was driving around to feed calves. When she stopped the truck to tend to an injured calf, the truck began to roll backwards with the door open and struck her in the ribs. The calf then rolled over onto her legs. The employee sustained fractured ribs and bruised legs.",1
An employee was operating a forklift and reached to adjust the materials on the forklift. Their knee hit the lever and the materials on the forklift fell onto their right hand. The middle and ring fingers were crushed.,1
Employees were removing a piece of glass from a building when the glass panel caught on a screw in the wall and broke in pieces. A piece of the broken glass cut an employee's arm just below the elbow.,1
"The employee exited the loading dock and went down the stairs next to the container to observe the seal being put on the container. While waiting for the truck to pull forward he noticed that the right side container door was swinging out and was going to strike the yellow bollard pole at the base of the stairs. In an attempt to keep that from happening, he stepped between the door and pole to push the door out of the way. The door struck him in the chest and pushed him back into the pole. The weight of the door pinned him against the yellow bollard pole causing a bruised lung and a liver laceration.",1
An employee was rewiring replacement batteries in an existing battery string and created a short circuit that resulted in an arc flash. The employee sustained second degree burns to his left hand and fingers.,1
An employee's left thumb sustained a severe laceration when it was pinned by a power press.,1
"An employee was cutting lumber to box a water pipe. The saw jumped the workpiece and struck him in the leg, causing a laceration.",1
A temporary employee was hooking a chain to an excavator bucket when the excavator bucket moved toward the right side of a bulldozer. The employee's right leg was pinned between the excavator bucket and a part of the bulldozer causing a fracture at the knee.,1
The employee was engaged in paving operations. He walked into the ditch and was struck by the bulldozer causing a fractured shin.,1
"An employee was attempting to secure a metal track to a metal base when the employee's hand slipped and the metal came down, crushing the employee's finger between both pieces.",1
Employees were setting up cross members on a pallet rack. The members snap into place. One of the cross members fell down striking one employee and breaking the right leg.,1
An employee was loading squash onto a trailer when he lost balance and fell to the ground. The trailer was moving forward and rolled over the employee's torso. The employee sustained broken ribs and a fractured spine and hip.,1
"The employee was walking back to her work cell, tripped on a guard rail anchor plate, and fell to the ground hitting her chin on the concrete floor. She sustained a laceration to her chin, a fractured jaw on the left and right sides and a fractured nose.",1
"An employee was cutting the leading edge of a structural member as part of a structural demolition. After cutting the beam, the roof collapsed and the employee fell 12 feet. The employee was hospitalized for a fracture.",1
"An employee was operating an overhead crane inching a hoisted cylinder into place on a material handler with their left hand placed on the cylinder. When the hoisted cylinder slid into place on the material handler, the tip of the employee's left middle finger was pinched between the cylinder and the material handler's stabilizer bracket and amputated.",0
An employee was splashed with a hot wax and ink mixture after opening a pipe and experienced burns to his hand.,1
"While changing a wiper rubber on the rig floor, an employee stepped on the Kelly (rotating piece of the floor) as it was moving and broke his right leg.",1
An employee suffered the amputation of the right index fingertip from contact with two boards.,0
"On June 12, 2018, an employee was holding a cooling block on the downstream extruder ""B"" wheel, while another employee was bolting it in. The extruder machine's wheel rotated catching the employees left thumb and amputating it.",0
"On 6/12/2018, an employee was moving plastic parts and lacerated his thumb. The employee was hospitalized.",1
"An employee was preparing wood to paint while standing on a residential roof. He fell to the ground about 8-12 feet below, breaking his right heel and suffering contusions to his right shinbones.",1
"A pipe burst in the department store and water was leaking onto the floor. An employee slipped on the wet floor and fell hitting her head on the floor. She was hospitalized for pain in her shoulder, neck and lower back.",1
An employee was cutting a pipe with a power saw. The pipe slipped and the saw amputated the employee's left hand fingers.,1
An employee was moving pans on and off a production line and tripped on a guide rail for the production line. His left shoulder hit a pan cart resulting in a dislocated left shoulder.,1
"On June 13, 2018, an employee was clearing debris away from the photoelectric eyes on a conveyor that housed a kicker that moved logs. The machine engaged when the debris was moved which caused the kicker to cycle. The employee's right foot was crushed by the kicker resulting in the partial surgical amputation of two toes.",0
"An employee was installing the flooring of a portable storage building when he stepped on a flexible air hose, lost his balance and fell approximately ten inches to the ground. The employee sustained a broken hip and ankle.",1
"An employee's left shoe got caught on the ladder causing him to start to fall. When it became unstuck, the employee used his left leg to catch/stop his fall and his leg slammed into the ground. The employee was hospitalized for a hyperextended knee.",1
"An employee stepped onto a board in the attic which broke. He lost his balance and fell about 9 feet down the ladder accessing the attic of a residence, resulting in a broken bone in the lower leg.",1
An employee operating a forklift suffered an ankle fracture when he struck a column and the forklift's battery cover struck him.,1
An employee was on a stool retrieving a book. The employee lost balance and fell to the floor fracturing a femur.,1
The injured employee was preparing to assist a second employee with riveting a trailer during the manufacturing process. The injured employee was holding a bucking bar while a second employee was riveting. The trailer was sitting on a set of stands when it shifted and caught the injured employee's left hand between the trailer frame and the stand. The injured employee suffered an amputation of the left fifth finger at the second joint and the fourth finger at the first joint.,0
An employee was working with a small tank of glue product and spilled glue on the lower portion of their legs and feet resulting in chemical burns.,1
Two employees were tying rebar and getting ready to pour a concrete slab for a ramp to a parking lot of a multi-family dwelling under construction. A vehicle struck a temporary chain link fence that the employees were working in close proximity to causing it to fall over onto the employees and trap them. One employee was admitted to the hospital for a strained back and contusions.,1
An employee was operating a lift to retrieve merchandise from an elevated rack. The employee's left hand struck the rack and his pinky finger was partially amputated. The employee was hospitalized for surgery.,0
An employee was assaulted by a shoplifter and sustained a broken hip and lacerations on the right arm.,1
An employee was operating the press brake and partially amputated the right thumb.,0
An employee was walking and fell breaking a hip.,1
"An employee went home after completing his shift; not feeling well, he went to the hospital, where he was admitted for severe dehydration and heat exhaustion.",1
"An employee was attempting to refill the fuel tank on a compressor in a trailer when the fuel tank cap pressurized and ignited gas vapors. The employee suffered first and second degree burns to the face, ears and nose.",1
An employee was operating the core machine and became sick while on break. The employee was hospitalized for heat stroke.,1
"An employee was attempting to remove a piece of lathe from a jack ladder chain. When she pulled the lathe loose, the jack ladder chain started up and pinched the tip of her right middle finger between the chain lug and the metal plating. Her right middle finger was amputated at the first knuckle.",1
"An employee was cutting steel tube to specification with a powered saw. While removing a jammed part from the saw, the employee's right middle finger was amputated by the blade.",0
An employee was working on a stamping press and amputated his right thumb.,0
The employee was working from a platform when they slipped and fell approximately 15 feet through an opening to the surface below. The employee sustained trauma to the upper rib cage.,1
An employee was standing at the rear of a digger derrick truck loading it. The employee's finger was caught between a railing and a concrete pier as it was being loaded into the truck. The left index fingertip was amputated.,0
"An employee was walking into work, tripped over a crack in the sidewalk and fell resulting in a fracture and a torn ligament in the left elbow.",1
An employee was repairing the brakes on a trailer and crushed their right hand between the brake chamber and the trailer frame causing injury to the ring finger and amputation of the pinky fingertip.,0
An employee was on a four-foot ladder adjusting a handicap sign. The employee missed a rung and fell to the ground fracturing the right knee.,1
An employee walking down an egress ramp fell and broke his leg.,1
"While cleaning out the A-side actuator with another employee, the valve closed on the injured employee's right middle and index fingers resulting in amputation of the fingers.",0
An employee was installing a 50 lbs. chain onto a metal sprocket (non-moving) and crushed their right middle finger. The fingertip was amputated.,0
"A machine was shut down for maintenance. During removal of the machine guard, the guard fell and struck the injured employee's right middle finger causing ligament damage.",1
"An employee was struck on the head by the frame of the trailer's side door when it fell after opening it. The employee sustained a laceration to the head and pain in the head, neck, and shoulders.",1
"The injured employee was asked to help flip over the gondola to get the debris out. While flipping the gondola with the operator, the employee pinched his left middle fingertip between the corner of the gondola and the cement floor. When he pulled his hand away from the pinch point, skin from the fingertip (palm side) was severed above the first joint. The employee was wearing nitrile gloves with cotton gloves over them at the time of the incident.",0
An employee was working on a ladder attaching gutters to the roof. The ladder started sliding to the right and the employee jumped 18 feet to the ground. The employee sustained a fracture in his lower vertebrae and possible ligament damage to his knee.,1
An employee was clearing brush and debris from around a house for sale and was bitten on the abdomen by a rattlesnake.,1
"An employee was scrubbing the floor with a ride along industrial scrubber. The employee stepped off of the scrubber, slipped, and extended her leg.",1
An employee was cleaning a stainless steel vat and their right thumb was caught and amputated between the frame of the vat cleaner and the bracing bar.,1
"A temporary employee slid bottles of cleaning fluid down the line with his hand and some of the liquid splashed onto his face, causing his lips to swell.",1
"An employee was operating a paper trimmer machine. While removing a piece of trim after a cut, the tip of his right third finger was caught in an opening in the paper clamp as the control was released. His hand followed the clamp up and the fingertip contacted the retracted blade. The employee suffered a fingertip amputation.",1
An employee was removing a valve from an acetylene tank with the valve machine when his right hand slipped and the equipment activated amputating the tip of his left middle finger.,0
An employee suffered an amputation on his left hand middle finger while adjusting the guides on the paper converting machine.,0
"An employee was removing expired chlorine tabs from a dilution system tank that was shut down for maintenance. He was exposed to chlorinated water from a leak in the system, as well as wet chlorine tablets stored in a bucket during the maintenance. He reported having a heavy cough after his shift and difficulty breathing the next day and was hospitalized.",1
An employee was cleaning the gutters on the second level of a residential structure and fell from the roof breaking a wrist. The employee was hospitalized.,1
An employee operating a forklift struck a stationary forklift crushing the left foot. The foot was amputated.,1
An employee was walking behind a trackhoe when it backed up and ran over both of the employee's legs. The employee was hospitalized with leg lacerations.,1
"An employee was working on an air conditioning unit in a closet-like area when he received an electrical shock and fell, hitting his head. He received third degree burns to both hands and lacerated his forehead, requiring hospitalization and stitches.",1
"An employee was repairing a butterfly valve when a coworker turned on the pressure. The disc inside the butterfly valve then rotated and cut the employee's left ring finger, resulting in a fingertip amputation.",0
An employee's finger was pinched and avulsed while moving I-beams.,1
"An employee fell about 10 feet off a ladder to the ground, breaking his heel and requiring hospitalization.",1
An employee was stepping off of a ladder onto an uneven surface when he twisted and broke his ankle.,1
"Employees were using a nail gun to frame wall studs for a shed. While a co-worker was passing the nail gun to the injured employee, it fired and a nail punctured the injured employee's knee.",1
"On 6/14/2018, an employee was placing trash/debris in a dumpster when the lid/door closed on and crushed his finger, resulting in a partial fingertip amputation.",0
"An employee was standing/walking nearby as a compactor was being unloaded. The door of the compactor failed, swung open, and struck/pinned the employee, who suffered a severe laceration to the back of the neck. The employee was hospitalized.",1
"An employee was using a two-wheeled dolly to move furniture. He grabbed banding on the product to help lift it onto the dolly when the banding broke, causing him to fall backwards and injure his left thigh.",1
"An employee was delivering product to a customer when he experienced severe leg cramps, requiring hospitalization for dehydration and heat stress.",1
"An employee was operating a rough terrain forklift to repair a metal guardrail along the highway when the forklift drove off a 6-foot ledge and rolled over. The employee suffered dislocated vertebrae, a fractured left eye socket, lacerations, and contusions.",1
"An employee was pulling electrical wire through an outlet box when his left thumb was cut on the edge of the box, requiring hospitalization.",1
"An employee was working on a pump jack when his right hand was caught in the pump jack's belt, severing the first and second digits of his second and third fingers, as well as his thumb tip.",0
An employee was cleaning off the cutting area around a router machine when the router bit partially amputated his fingertip. The router was running and guarded at the time of the incident.,0
An employee was struck by a mooring line connecting a barge to a ship when a passing vessel's wake caused the barge to shift outward from the vessel.,1
An employee was riding in an air-conditioned pickup truck to another jobsite when he felt dizzy. He was hospitalized due to dehydration and heat exhaustion.,1
An employee was inspecting a Bradley Fighting Vehicle when he fell about 5 feet from the top of the vehicle to the concrete ground below. He suffered seven broken ribs and a punctured lung.,1
"An employee was descending a ladder when it became displaced. The employee then fell from the ladder  to the roof and fractured a leg, requiring hospitalization.",1
"An employee fell 8 feet through a ceiling hole to the ground while working on a modular home, fracturing his back and cutting his head. He was hospitalized and required staples.",1
"An employee was operating a large off-road vehicle when he lost control and the vehicle rolled over. He was ejected and the vehicle rolled over him, fracturing his pelvis and hip, and causing scrapes and abrasions. He was hospitalized.",1
"On June 14, 2018, at 6:30 p.m., an employee was attempting to re-thread material in a press when his fingers were caught by the cylinders and his hand was pulled into the machine, resulting in an open fracture and lacerations to four digits on his right hand. He was hospitalized. The press was not shut down at the time of the incident.",1
"An employee was unloading and loading multiple boxes of supplies in a supply trailer when he suffered heat-related symptoms, including heartburn, vomiting, and thirst. He was hospitalized. The supply trailer was not air conditioned and the outside temperature was in the 90-degree range at the time of the incident.",1
"An employee was trimming a pork loin with a saw when the meat slipped and his right index finger contacted the blade, amputating his fingertip.",0
"An employee was testing material for color accuracy when the material ignited, resulting in a flash fire that burned both of her hands and arms, the right side of her head, and her right leg.",1
An employee was cutting wood furniture parts on a band saw when the moving blade struck and amputated the employee's left pinky finger.,1
"An employee was using an awl to line up a frame rail prior to stud welding operations when his right index finger was caught in the frame rail rollers, resulting in a fingertip amputation.",0
"An employee was stocking merchandise when a bucket of pool chemical fell and struck his leg, causing him to fall. He broke his leg.",1
"An employee was removing a pallet in a trailer when the pallet fell on him, fracturing his right leg.",1
"On June 14, 2018, an employee fell approximately 17 feet while performing roofing work. The employee sustained a broken ankle, fractured ribs and abdominal pain. The employee was wearing fall protection at the time.",1
An employee was removing a drill stem from a drill stem rack and his right middle finger was caught in a pinch point created by the drill stem and a caliper resulting in a fingertip amputation.,0
"An employee sustained a back injury  during an ATV training event. The employee was operating the ATV up a berm, lost control and was ejected backwards off the ATV onto the ground as the nose of the ATV continued in a forward motion.",1
"An employee was attempting to engage a dock board. It was stuck so the employee used his hand. When the board came loose, it crushed several digits on his left hand. The left ring finger was partially amputated.",0
"An employee went up a set of stairs to a catwalk to turn on a conveyor. He then turned around to come back down and fell all the way down the stairs to the floor, fracturing his left leg.",1
A temporary employee was operating a stand-up forklift when the employee stepped off the forklift and was struck on the left foot by the wheel. His left foot was amputated and he was hospitalized.,1
"An employee was cleaning out a cement mixer when it turned on and mangled the employee's left arm, requiring hospitalization.",1
"A lift truck backed out of a sea container while another employee was walking by. Due to a blind spot, the lift truck operator did not see the employee. The lift truck then struck the employee, who suffered a hip fracture that required hospitalization and surgery.",1
An employee fell approximately 15 to 18 feet from a ladder to the ground and suffered a compound fracture to the left tibia and fibula.,1
"An employee got into an altercation with an employee of another subcontractor on the job site. During the altercation, the employee was cut on the left forearm with a carpentry razor blade, requiring reconstruction surgery.",1
"An employee was stacking a piece of 2x12x24 lumber with a second employee when the second employee dropped his end of the lumber, causing it to fall out of the first employee's hand. While attempting to grab the falling lumber, the first employee's right middle fingertip was caught between the lumber and a nearby pole, resulting in a partial amputation.",0
"An employee fell from a ladder to the ground during tree trimming activities, sustaining neck and spinal nerve injuries.",1
"An employee was performing maintenance on the load break switches of a 13.8 kV circuit when the employee came into contact with energized equipment and an arc flash occurred. The employee suffered third degree arc flash burns from the shoulders up to the head, requiring hospitalization.",1
"On June 14, 2018, at 11:40 a.m., an employee was installing rebar bands on a gabion wall when he suffered a seizure, requiring hospitalization. Dehydration contributed to the seizure. The employee was tied off at the time so there were no physical injuries.",1
"An employee was sandblasting on a pipeline when the blasting hose became tangled. As he pulled on the hose to release it, he inadvertently hit the trigger of the blasting gun. Blasting media then hit his upper thigh, causing an abrasion/laceration.",1
"On June 13, 2018, an employee was delivering mail when she was bitten by a dog. The employee suffered lacerations and a broken arm, requiring surgery.",1
"An employee became dizzy from heat while stacking lumber and reached out to regain balance. While reaching out, the employee's left middle finger was caught in a chain and sprocket, resulting in an amputation.",1
"An employee was cutting grass behind the shop using a rotary mower attached to the back of a tractor. He was passing a rack that had a sputter bar when a tractor part became hooked on a pad-eye on the sputter bar, causing the rack to be pulled down onto the employee. The rack landed on his back and pinned him against the tractor steering wheel. Another employee ran over and cut the tractor off. The employee suffered six cracked ribs, a punctured lung, and broken vertebrae, requiring hospitalization.",1
"An employee was trying to flatten a 1-inch by 12-inch piece of metal when it broke in half and struck his left middle finger, resulting in a surgical amputation to the first knuckle.",0
An employee was operating a molding machine when it cycled and caused amputations to fingers on both of the employee's hands. The machine was guarded at the time.,1
"An employee was trying to remove a bucket attachment that was stuck on a skid steer. He raised the bucket off the ground, exited the steer cab, and was hammering on the stuck release pin when the bucket fell to the ground, striking him below the knees and scraping several inches of skin off to the bone.",1
"An employee tripped over a rock while walking and fell, fracturing his right lower leg.",1
"An employee with Peninsula Roofing Company, Inc., slipped and fell approximately 26' as he was transitioning from a ladder to a roof with his personal fall arrest system harness. He suffered fractured wrists, a broken heel and right foot, and a small fracture to the spine near the tailbone, requiring hospitalization.",1
"An employee was working in the office while a forklift operator was outside unloading a truck. The forklift operator struck a beam, cutting a hole in the container he was unloading. As he was attempting to patch the hole, he was caught under soy beans that spilled from the container and yelled for help. The employee in the office ran out and slipped on the spilled beans, falling onto the concrete floor and breaking her right ankle. She was hospitalized.",1
"An employee was positioned on the ground cutting a tree that had fallen on a power line (the line was de-energized) when a 4' tree limb fell on him. He fell to the ground with the tree limb, which pinned his left leg and broke his femur.",1
"While on a trash pickup route, an employee experienced cramping in the legs and arms due to dehydration/heat exhaustion. The employee was hospitalized.",1
An employee was using a deli slicer when it sliced off the tip of the employee's right thumb.,0
"An employee was working on an oven press when he became dehydrated and fell backwards, hitting his head on a pallet and fracturing his skull.",1
"An employee was walking through the kitchen area when she stumbled and fell into a food storage shelf, fracturing her femur.",1
"An employee climbed a ladder attached to a hopper bottom trailer to tighten a knot on a tarp. He slipped off the ladder and fell 6 to 10 feet to the concrete floor of the shop, fracturing his pelvis.",1
An employee was taking a pallet off a loading station in a distribution center when the chain that creates movement on the line popped into motion and amputated his left index finger at the first knuckle behind the nail. Lockout/tagout procedures were not performed at the time of the incident.,1
"An employee was walking in a hospital parking lot. She stepped onto the sidewalk, which caught her flip-flop. She tripped and fell onto a nearby car, then rolled, her right hip striking the pavement. She was hospitalized with a broken right femoral neck requiring surgery.",1
An employee was cutting a PVC pipe with a cut-off saw when the saw kicked back and severely lacerated his face. He was hospitalized and had surgery.,1
"A forklift ran over an employee's left leg as it backed up, fracturing his tibia.",1
"An employee was transferring a bundle of steel to a conveyor table with a hoist when the load shifted and struck the employee's hands, resulting in amputations to the right and left middle fingertips.",0
"An employee was using a chop saw to cut a stack of pallet boards when his left-hand fingers made contact with the rotating saw blade, amputating his middle and pointer fingers down to the third knuckle. His thumb was still partially attached at the time of the incident.",0
"An employee was reversing a walkie-rider when she became caught between the equipment and a guardrail, breaking her right tibia and ankle. She was hospitalized.",1
"An employee was removing a jam on a pallet board notcher machine when the employee's left hand became caught in a chain and sprocket, resulting in a ring fingertip amputation.",0
An employee was clearing jammed material from a mill. The tip of the employee's left ring finger was amputated.,0
"An employee was using a come-a-long to raise a basket out of a sump to clean it. When the basket reached the top, the come-a-long slipped out of gear and the basket fell. As it fell, the basket pulled the employee's left index finger into the come-a-long, resulting in an amputation of the left index finger up to the first knuckle.",1
"An employee was setting forms for a concrete pour. A steel plate that shortens the form was askew in the track and did not seat properly. The employee began to wiggle the plate to get it in place when it released and pinched his left ring finger, resulting in a fingertip amputation.",0
"An employee was attempting to remove a compressed spring and tension rod assembly from a dock leveler when the spring and tension rod came loose and struck the employee's left femur, breaking it and requiring hospitalization.",1
"An employee was attempting to catch a part after it fell from a horizontal lathe when his right hand was caught in between the part itself and the surface of the lathe. His right pinky finger was smashed, requiring hospitalization and surgery.",1
"An employee was on a ladder pulling cables through the ceiling when the employee lost balance and fell approximately 2 to 3 feet to the ground, fracturing a femur.",1
"An employee was operating a pipe handler when a drilling pipe was released and struck his right hand, resulting in a pinky finger amputation and fractures to the ring and middle fingers.",1
"An employee and another employee were performing scrapping work on site when a 2"" lip failed, causing some structure piping to fall. The pipe hit the employee, causing him to fall and land on his left foot. He broke two toes, suffered a right shoulder strain/torn muscle, and broke two right-side ribs, requiring hospitalization.",1
"An employee was loading material onto a conveyor at the back of a truck when he missed his step, lost his balance, and fell off the truck to the ground, fracturing his left wrist. He was hospitalized for surgery.",1
An employee was changing the die on an extrusion press machine when the machine actuated amputated the employee's right index finger to the first knuckle. The die was energized at the time of the incident.,1
An employee was loosening a bolt on a piece of equipment when he slipped and suffered an open fracture of his right ring finger phalanx.,1
"An employee was operating a string line reel to roll up the string line used in concrete paving operations when the reel stopped working. As he then walked towards the string line reel, it activated, causing the string line to wrap around his legs. He suffered a compound fracture to the right leg.",1
An employee was trying to dislodge jammed plastic in a plastic sheet line; a shear in the machine amputated the tips of his left middle and ring fingers. The machine was guarded with a metal grate at the time of the incident.,0
"An employee was attempting to clear a jam on a plastic bottle trimmer on the blow mold machine when the trimmer lacerated and fractured the employee's right thumb, requiring hospitalization.",1
"An employee was helping to load a reel of cable into the rear of a bucket truck. His left middle finger was caught between the cable and the truck bed, and the tip was amputated.",0
"A temporary employee was entering a trench that was 4 feet by 8 feet and 4 feet deep to help install a propane gas tank. While entering the trench, which had wood and aluminum siding installed, the employee slipped and fell. The siding then lacerated his left forearm, requiring hospitalization and surgery.",1
"An employee fell while walking, suffering a brain bleed that required hospitalization.",1
"An employee was steadying a road boring machine as it was loaded onto the back of a truck. The employee's right index finger was in a pinch point when the machine was lowered onto the finger, crushing it and requiring a medical amputation.",0
"An employee was pulling a pipe out of a pipe cutting machine when the pipe fell on his finger. As he pulled his finger out, the end of the pipe amputated the pad of his right index finger.",0
An employee working on a car sustained third degree burns to 50 percent of his body when a spark ignited the gas tank of the car he was working on.,1
"An employee was using hot water to de-ice the floor of the cooler/freezer area when he slipped. Hot water then spilled on and burned his face, chest, and arms.",1
"An employee was removing a salvageable part from a forklift that was being decommissioned and removed. The part was a 2""x3""x6' steel block. When he cut the part away from the forklift using a torch, it fell to the ground and struck his right foot on the metatarsal area (behind the steel toe cap), fracturing it.",1
"While working in high temperatures, an employee suffered a rapid heart rate, stomach pain, and weakness due to heat stress. The employee was hospitalized.",1
"On June 16, 2018, at approximately 9:00 a.m., an employee was attempting to check the gear box on top of a ready mix truck when the employee slipped, fell, and struck the truck fender and the floor. The employee suffered three broken ribs and a punctured lung.",1
An employee was cleaning debris from a charging machine with a rod that had a spade on the end of it when his left thumb was caught between the shield on the rod and the charging machine. His left thumb tip was amputated.,0
"An employee was struck in the eye while picking up steel strapping, suffering an eye laceration that required hospitalization. Safety glasses were not worn at the time of the incident.",1
"An employee was struck while walking behind a reversing mixer truck, suffering broken bones that required hospitalization.",1
"An employee was moving metal material when one of the employee's right fingers was caught between the material, resulting in a traumatic amputation of the fingertip.",1
"An employee was grabbing a winch to make a pipe connection on the rig floor when his finger was crushed between the winch cable and the power swivel, partially amputating his pinky finger.",1
"An employee was finishing a vertical mold set-up when the lid fell. The employee entered the mold to try to retrieve the lid. The mold next to the one he was in was filled with molten steel. He could not get out of the mold and was burned by the radiant heat from the adjacent mold. He suffered burns to 6% of his body (hands, back, buttocks).",1
"After checking air conditioning units on a roof, an employee was coming down the roof access stairs when he slipped and fell to the ground, suffering a slipped disc in his back.",1
"An employee was at the end of a trans-load (transferring from railcar to tanker truck) of nitric acid when a line broke, exposing him to nitric acid burns on his legs.",1
"An employee was walking backwards in front of his pallet jack when he tripped on a nearby pallet. He fell towards the floor and grabbed the drive handle of his pallet jack, causing the pallet jack to release its brake and drive forward. His right ankle and foot were crushed between the pallet jack and a pallet.",1
"An employee was riding on a K-loader when the operator applied the brakes. The employee lost her balance and fell approximately 6 feet to the concrete below, suffering a traumatic head injury.",1
An employee slipped and fell on a wet floor while mopping a resident's room. The employee broke the right knee and was hospitalized.,1
"An employee was getting a well head to stop on the down side and the weights on top. He was trying to roll up loose cable running from the rod rotator to a Samson post. His hand was on the brake and he was watching the weights when he pulled back on the brake to stop the weights. His hand then struck the top of the cross bar of the weight guards and his finger was struck in the middle. His right thumb was pinched and injured, resulting in a thumb tip amputation.",0
"An employee was removing a critter from an electrical panel box when he received an electrical shock, suffering electrical burns that required hospitalization.",1
"An employee was trying to avoid a car passing through the work zone when she stepped into the path of an asphalt front roller. The roller's steel drum then ran over her left foot. She suffered severe left ankle/foot fractures with open wounds, lacerated tendons, and a right tibial fracture. Her left foot and ankle eventually had to be surgically removed.",1
"On 6/17/2018, an employee's right thumb was caught in a clamp as it clamped down on a wheel, pinching off his thumb tip.",1
"On June 17, 2018, an employee fell on the last step while walking down a stairway.",1
"An employee was assembling a wooden door when the employee's left index finger was caught in a pinch point, resulting in a fingertip amputation.",0
An employee was hospitalized for back spasms after lifting a stack of seven 9.5-pound parts into a box.,1
"While cleaning up materials and equipment on a hot day, an employee suffered heat-related injuries, including an acute kidney injury, liver problems, and a muscle injury.",1
"An employee was walking down steps when he tripped and fell, fracturing his left fibula and tibia.",1
"A team was unloading a beam with a crane when an employee walked between the beam and a pipe. The beam leaned in toward the pipe, and the employee was pinned between the two.",1
"An employee was lancing heater tubes with pressurized water equipment. When he pulled the lance out, the pressurized water struck his left bicep and chest, resulting in abrasions and hospitalization.",1
An employee was operating a machine when the employee's arm was caught between the bottom edge of the machine's door and its conveyor system. The employee suffered a laceration and fractured forearm.,1
An employee was in a bucket truck when it became overloaded and ejected him. He suffered collapsed lungs and a broken back. Fall protection was not worn at the time of the incident.,1
"An employee was climbing a ladder to inspect roofing work when he lost his balance and fell approximately 17 feet, landing on two subcontractors below. He broke five ribs.",1
An employee was doing mechanical work on a military truck. The truck started up and the alternator belt caught the employee's right hand. The tip of the employee's index finger was amputated.,1
"An employee was attempting to move sheets of drywall stacked against a wall when the stack fell over and landed on his left foot and leg, damaging tendons and requiring hospitalization for surgery.",1
"An employee was standing near a conveyor while another employee was pushing a conveyor section to move it at a different location. The conveyor then tipped over and struck the first employee's left ankle, fracturing it. The employee was hospitalized and had surgery.",1
An employee was feeding material into a machine when the employee's hand was pulled and crushed between the rollers.,1
"An employee began to suffer symptoms of carbon monoxide poisoning while walking by an area with elevated carbon monoxide levels, requiring hospitalization.",1
An airport ramp agent was trying to connect a cart and hitch when his left little finger was caught between the tongue of the cart and the hitch. He suffered a bad cut and was hospitalized. He was wearing a glove at the time of the incident.,1
"An employee was exiting the building through a revolving door when she tripped and fell onto her right leg, fracturing her femur.",1
"An employee's feet were struck by a forklift's forks. He suffered ankle/foot contusions, requiring hospitalization.",1
"An employee was trying to diagnose why a customer's windshield washer pump was not working when his right ring finger was caught in the vehicle's serpentine belt, resulting in an amputation.",1
"An employee was sorting packages on the dock when she exhibited signs of dehydration and heat stress, requiring hospitalization.",1
"An employee was using a pallet jack to move steel racking from the sales floor to outside of the store when the steel racking slipped off the pallet. The employee and another employee attempted to lift the steel to reposition it on the pallet. The employee lost his grip and his right middle finger was caught between two sections of the steel racking, resulting in a fingertip amputation.",0
"An employee was changing a metal wheel on a print cylinder transport while a coworker supported the side of the transport with a pry bar. The pry bar slipped and the employee's right index fingertip was caught between the metal wheel and the side of the transport, resulting in an amputation.",1
"An employee was attempting to assemble a section of a racking system when his right middle finger became caught between the racking system, amputating his fingertip.",0
"An employee began picking up collapsed cardboard from a motor assembly cover next to a conveyor that was in the up lift gate position. His finger was caught next to the pivot point of the conveyor lift gate as it fell, resulting in a partial fingertip amputation.",1
"An employee was sandblasting a 3,000-pound metal injector body when it flipped and fell on his left foot.",1
"An employee was lifting and moving a 40-foot shipping container with a top-loader stacker vehicle to place that container on top of two other shipping containers that had been stacked. While driving the top-loader forward, he activated the vehicle braking system as the shipping container was lifted. The vehicle then tipped and fell forward. As the vehicle was tipping forward, he jumped from the operator's cab, fell to the pavement below, and fractured both legs.",1
"An employee was cleaning a conveyor when he noticed raw meat on the underside of the conveyor roller. He was attempting to brush the meat off when the conveyor caught his glove and pulled his arm into the conveyor, causing a laceration, torn muscle, and broken bones in the arm and shoulder. The conveyor was not turned off or locked/tagged out at the time of the incident.",1
"An employee was opening a bagged product at a table. A 10-inch knife on the table became caught on the bag as it was being opened and flung in the direction of the employee, striking and lacerating his left arm.",1
An employee was setting up an auto roll thread machine when it cycled and amputated the employee's left index finger.,0
An employee fell off a delivery truck while attempting to secure a pallet jack in the truck. He was hospitalized with a head injury.,1
"On June 18, 2018, an employee tripped on a floor mat and fell to the floor, suffering a fractured hip and requiring hospitalization.",1
"A temporary employee was using a band saw to cut pieces of metal when his gloved left-hand index finger entered he saw's point of operation. The glove was caught in the blade, resulting in an amputation of the employee's index fingertip.",0
"A pallet of material had been received in the warehouse, and receiving had removed straps holding the material to the pallet in order to stock the material. While walking through the warehouse, an employee tripped on one of the straps and fell to the ground, sustaining a fractured femur above the left knee.",1
Two temporary employees were cleaning around a machine. One of the employees lifted the machine with a forklift as the second employee reached underneath it. The machine then slid off the forks and onto the second employee's left hand and fingers.,1
"An employee was taking apart some pipe on top of an oil and gas tank when he slipped and fell approximately 22 feet. The employee sustained cracked ribs, a collapsed lung and a cracked collarbone. Fall protection was not worn at the time.",1
"An employee was removing debris from a conveyor belt when his right middle fingertip was caught between the conveyor and a moving slat, resulting in a fingertip amputation and tissue loss. The conveyor was unguarded and active at the time of the incident.",0
An employee stepped into an area where a setting machine pushes a brick column into the setting heads. He was then struck by the machine and sustained a fracture to his lower left leg.,1
"An employee was using a mag drill to drill holes when the drill broke friction and spun, amputating his left index fingertip.",1
"An employee was climbing on a trash bin to remove debris when he lost his balance and fell to the ground, breaking his leg.",1
A temporary employee's left hand was crushed and lacerated by a shear. The shear was guarded at the time.,1
"An employee was closing a separator when a pipe popped off, releasing tallow that burned the employee's left upper arm.",1
"An employee was providing air to support a bridge dismantling project. He began to walk to a truck where the air compressor was housed when his knee gave out at the top of a hill, causing him to slip down the embankment approximately 12 to 15 feet. He sustained knee injures and was hospitalized for surgery.",1
"An employee was delivering mail to a business when he tripped and fell onto his left side, fracturing his left hip and requiring hospitalization.",1
An employee was cutting a tree with a chain saw when the tree snapped back and broke the employee's leg.,1
An employee was performing concrete work when he fell from a scaffold and lost multiple teeth.,1
An employee was installing the cylinder of a rebuilt hydraulic lift on a fire truck. The cylinder dropped onto the employee's right ring finger; the fingertip was amputated to the first knuckle.,0
"An employee was working from an A-frame ladder while installing cardboard baffles in a garage's roof truss seals when he lost his balance. He grabbed the garage door track to try and regain balance, and the sharp track partially amputated his right ring finger.",0
"An employee exited his switcher truck to ask another driver where to drop his trailer when his truck started to move. He was trying to stop the truck when he was caught between it and another trailer. He suffered head trauma, broken ribs, and multiple lacerations, requiring hospitalization.",1
"An employee felt dizzy and nauseous after working in a cooling tower. He collapsed, blacked out, and then vomited. He was hospitalized for dehydration and a fractured left big toe.",1
A flagger was directing vehicular traffic when the traffic light turned green and a vehicle (minivan) proceeded through the intersection and struck the flagger. The flagger sustained a broken right leg and a broken left ankle.,1
"An employee was standing on a pipe and attempting to cover a small caustic leak when he slipped and fell off the pipe, striking his head. During the fall, caustic splashed under his face shield and burned his face.",1
"On June 19, 2018, an employee was repairing the roof of a two-story residence when he fell from the roof, breaking his ankle(s). He was hospitalized.",1
"An employee was working in an aerial lift to loosen a cam-lock trap when a cap struck the employee's face, requiring hospitalization.",1
An employee was working on a shear when his left index finger was amputated.,0
"An employee tripped over a traffic cone and fell, striking her face on the pavement and requiring hospitalization.",1
"An employee was installing shingle siding from a scaffold when he fell through the guardrails to the ground below, fracturing his vertebrae, pelvis, and arm.",1
"An employee was walking down the hall near the laundry room of an apartment complex when he slipped on the floor and did a split, injuring his leg muscle.",1
"An employee slipped and fell on a concrete entryway that was wet from rain, suffering a fractured right kneecap.",1
An employee was in a bucket cutting in jumpers to energize a new electrical line when his hands started cramping due to heat-related illness. He was hospitalized.,1
"An employee was walking in a parking lot when she fell, suffering a ruptured Achilles tendon.",1
An employee was wrecking form work on the elevated deck portion of a structure. He was attempting to help a second employee lift a sheet of plywood when he fell through an unsupported open space and struck the scaffold underneath before hitting the ground. He fell a total of 15 feet and suffered six broken ribs and a punctured lung.,1
An employee was operating a table saw when the blade deeply lacerated his left thumb.,1
"An employee dropped a concrete form on his hand, causing an injury that required surgery.",1
"An employee was on site troubleshooting magnetic door holders and investigating a short in the low voltage wiring. She was on a 6-foot ladder in the access hatch of a first floor rotunda when she located an unmarked junction box near the assumed trouble area and removed the cover. She then came into contact with a high-voltage bare wire (287 volts) and received an electrical shock, requiring hospitalization.",1
An employee was walking through a construction site when he tripped over some construction debris and fell onto his knee. He suffered a knee sprain and was hospitalized.,1
"On June 19, 2018, an employee was cutting with a chop saw when the blade broke and impaled his leg. He was hospitalized.",1
"An employee turned off and dismounted a lawnmower. The mower started to roll and he tried to stop it. His foot was caught between the front wheel of the mower and a rock, resulting in foot lacerations.",1
"An employee was taking a joint of iron off the back of a truck and rotating it back into the cradle where it was stored. A brace was missing; when the joint was put into its resting spot, it kept rolling, crushing the employee's left little finger against the work platform. The finger was amputated.",0
"An employee was using a platform on a forklift to reach merchandise when he fell to the ground below, fracturing his wrists and shoulders and suffering a concussion. Fall protection was not worn at the time.",1
"An employee was stacking and nailing small sections of wood trusses on top of each other when the stack of trusses, which was about 4 feet high, fell on him. He suffered upper body trauma and was hospitalized.",1
"An employee suffered heat-related illness while performing construction work outside, requiring hospitalization.",1
"An employee was handling steel sheets when a metal sheet fell and injured his finger, requiring hospitalization.",1
"An employee was pushing a box down a conveyor when the employee tripped on a pallet and fell off the conveyor, suffering a broken hip and requiring hospitalization.",1
"An employee was working on a machine when his left hand entered the machine, resulting in a pinky fingertip amputation.",0
"An employee was troubleshooting a generator that was not connecting to a switch gear. The employee slipped on the steps in front of the generator, and his left hand touched an energized busbar. He suffered a third-degree burn.",1
"An employee attempted to walk over some cartons that were in the walkway. He tripped, lost his balance, and landed awkwardly on his right ankle, requiring hospitalization and surgery.",1
An employee was grinding a piece of round stock when their glove got caught in the moving pedestal grinder and pulled into the grinding wheel. The employee suffered a broken fingertip resulting in surgical amputation.,0
"A temporary employee was cleaning a mold while preparing it to be placed in a mold press. The employee stepped down some steps and lost balance. While attempting to catch themselves, the employee's hand went into the machine's conveyor system and was caught between the roller and the mold plate, partially amputating the left ring finger.",0
An employee was setting cones when a vehicle entered the work zone and struck the employee causing fractures and lacerations.,1
"An employee had exited a vehicle when it began to roll. The employee was attempting to shut it off when another vehicle clipped the employee. The employee suffered a broken femur and injured calf, as well as a possible amputation.",1
An employee was sweeping the floor when a forklift ran over and fractured the employee's left foot.,1
"An employee was conducting maintenance on a truck while standing on a ladder when the employee fell 6 feet to the ground, head first. The employee suffered a concussion and cut above the right ear.",1
An employee was attempting to calm an aggressive client when the client pushed her to the ground. She suffered a fractured wrist and bruised ribs.,1
"An employee was sitting on the side of a truck trailer with his arm resting on the ramp, which was in the up position. The truck driver got into the truck and began reversing the trailer. The employee's right arm was then caught between the trailer and a skid steer that was behind it. The employee was hospitalized with a dislocated right shoulder and swelling.",1
"While operating a helical machine used to dig holes, an employee was struck by the machine's stabilizing bar. The employee's right thumb was amputated.",1
"An employee was operating a handheld router when a metal chip went up her nose and lodged into her throat, requiring hospitalization and surgery. A face shield was not worn at the time.",1
An employee was attempting to hold branches from one shrub out of the way while trimming another shrub with a gas-powered hedge trimmer. The trimmer then amputated his left little fingertip and cut his ring finger.,0
An employee was lifting a wheelchair from the grass to the sidewalk and suffered a back injury.,1
"An employee was tightening bolts with an impact wrench. The employee's left middle fingertip was caught and crushed between a bolt and the wrench's stabilizer arm, resulting in a surgical amputation.",0
"An employee was at the register. She took a few steps back to look out the window and identify which gas pump the customer was on. When she stepped back she tripped over a box/crate on the floor and fell, landing on her right hip.",1
An employee fainted while packaging perfume on an assembly line.,1
"While loading a pallet, an employee was struck on the back by a bag of flour that fell from a rack. The employee was hospitalized.",1
"An employee was operating a drill press when the bit caught the employee's glove and hand, resulting in a fingertip amputation to the fifth digit and lacerations to the third and fourth digits.",1
"An employee missed a step and fell while walking down the stairs, injuring the left knee and suffering a ruptured patella tendon. Both of the employee's hands were occupied at the time of the incident.",1
An employee was trying to shake a pebble out of her shoe when she lost balance and fell on her right side in the employee parking lot. She fractured her right hip.,1
"An employee was using a rib saw to cut brisket when the blade contacted his right middle finger, cutting it through to the bone. The finger had to be medically amputated.",0
An employee was climbing up scaffolding to put plastic on the roof and keep water out of recently poured wet concrete when the employee slipped on the wet scaffolding and fell approximately 25 feet to the ground. The employee suffered a broken right leg.,1
An employee was performing landscaping work when he began feeling dizzy and unwell. He was hospitalized for dehydration.,1
"An employee was descending a ladder after cleaning a light fixture when he fell to the ground, fracturing his arm and elbow.",1
"An employee was changing out a filter on the filler when hot water spilled on him, causing serious thermal burns.",1
"An employee was helping a crew inspect a newly installed pipeline. High-pressure water and construction debris escaped from the pipeline during pigging operations, knocking over the employee and injuring their head, torso, and leg.",1
"An employee was moving an accordion punch press into position to punch materials. Its wheels got stuck and it tipped onto him, fracturing a vertebra in the thoracic region of the back and causing abrasions to his shoulders and knees.",1
An employee was helping two other people remove a bush from a ditch when he became ill and experienced cramping. He was hospitalized for heat-related illness.,1
An employee was burning brush and sustained burns to their left arm and leg.,1
An employee was stabbed by another employee during an altercation they had while delivering papers.,1
"On June 20, 2018, an employee was using a hose to transload caustic soda from a railcar to a truck when the hose became disconnected and the caustic soda splashed underneath the employee's face shield. The employee suffered burns to the eyes.",1
"An employee was installing a chain when the motor fell, pulling on the chain. The employee's middle finger was caught between the chain and the sprocket and amputated at the tip.",0
"An employee fell between a dock plate and the rear of a truck in a loading dock area, striking and injuring a knee.",1
An employee was finishing the installation of LED lamps on a scissor lift when he suffered an electric shock resulting in hospitalization.,1
"An employee slipped and fell while getting out of his truck cab during a rainstorm, injuring his back.",1
"An employee as pulling the motor out of the water into the locked position. When it didn't lock, the motor descended and the employee was pulled overboard pinching her right thumb between the motor and the clasp to the bracket. Her fingertip was amputated.",0
An employee experienced heat exhaustion while collecting solid waste.,1
"An employee was connecting a gooseneck trailer to the ball hitch of a pickup truck. As the trailer was being shifted into place, his left middle fingertip was pinched and severed between the trailer and hitch.",1
"An employee was climbing a stairway. He fell, cutting his left leg on metal strapping at the bottom of the stairs.",1
"An employee was driving a new vehicle in reverse to an airport gate. When he turned the vehicle, it overturned. He suffered a concussion.",1
An employee was climbing on a jetveyor at an airport gate when the handrail collapsed while she was holding onto it. She then fell and hit her knee on the jetveyor step.,1
"An employee was assisting a client who was laying in bed. He bent over the bed to cover the client with blankets when he felt a sharp pain and pull in his lower back area, then fell onto his knees on the floor. He was unable to get up and required hospitalization.",1
"An employee fell over a retaining wall, breaking his leg.",1
"An employee was working on a concrete wall splitting production line. When he turned to discard waste into a hopper, he lost his footing on the raised platform and fell forward into the waste material in the bin. His right middle finger was pinched between the concrete waste in his hand and the concrete waste in the bin, and the tip was amputated.",0
"An employee was on a processing floor, operating a shell saw. The saw contacted the employee's left thumb, lacerating it.",1
An employee was moving a glass container of hot liquid when the container broke. The hot liquid then splashed and burned the employee.,1
An employee was sliding the fork of an extendable boom forklift when the employee's left middle finger was amputated to the first knuckle between the sliding fork and the forklift carriage.,1
"An employee was carrying a radio out of her office when she tripped and fell to the floor, suffering two fractures to her left arm that required surgery.",1
An employee was working on a bulldozer. His left hand was caught and smashed between the track and its frame.,1
"An employee was operating an ATV when it rolled over. He contacted the ground and the rolling ATV, suffering a punctured lung and shoulder injury. He was hospitalized.",1
An employee was loading produce greens and fainted twice. The second time he struck his head against the wall case in the produce department.,1
An employee was using a hot stick to test an electrical circuit in a junction box. He came into contact with an energized electrical circuit and was shocked.,1
"An employee received an electrical shock while getting ready to tie in a light ballast, requiring hospitalization.",1
"An employee was moving a small bundle of metal flashing when he lost control and the flashing cut his wrist, tearing a tendon.",1
"An employee was unloading a crate from a truck onto a forklift when he lost his balance and fell. Another crate (weighing about 70 pounds) was pulled onto his body, breaking his hip. He was hospitalized and underwent surgery.",1
An employee was participating in a scheduled evacuation drill when her right knee gave out. She fell onto the parking lot and suffered a knee injury.,1
"An employee was entering the cab of his truck when he slipped from the top step, fell, and struck his head on the ground. He suffered head trauma.",1
"An employee was trying to manually move a conveyor belt that was clogged. When he unclogged it, the belt moved quickly and his left index finger was then pinched between the belt and pulley, resulting in an amputation above the first knuckle. The equipment was turned off at the time.",0
"An employee was clearing a jam in a mulch blower when it activated, amputating the fingers on the employee's left hand.",1
"An employee was observing a customer unload freight with a forklift when the 2,650-pound freight fell off the forklift forks and struck the employee's right foot, fracturing and crushing the metatarsal. The employee was hospitalized.",1
An employee became nauseated while installing HVAC filters on a rooftop. He was hospitalized for dehydration.,1
"An employee was inside a box truck, using a hand truck to rearrange pallets. The hand truck got stuck, causing the employee to lose his balance and fall about 4 feet to the concrete. His head struck the concrete, and he sustained subdural hematomas and a fractured clavicle. He was hospitalized.",1
"An employee was turning around a riding pallet jack. The employee's left leg became pinned between the jack and the bottom rail of a storage rack, and the employee suffered a broken lower leg.",1
"Two employees were installing center bars, plates, and nuts on cased micropiles. As one employee was holding the center bar with a pipe wrench, the injured employee went to lift the plate. The wrench was released which caused the nut to catch and pull the plate down. The employee's right ring finger was caught between the plate and the casing; the first digit was amputated.",0
An asphalt roller operator fell approximately five feet from the operator's platform and was hospitalized for a severe head injury with concussion. The roller was parked at the time.,1
"Emergency work crews were dispatched to an area that had lost power. An employee was climbing a pole to repair a powerline that he thought was de-energized when he came into contact with an energized line. He suffered first degree burns on his left hand and third degree burns on his left thigh, requiring hospitalization. Electrical insulating gloves were not worn at the time of the incident.",1
An employee was walking through the door frame and caught his leg on a stringer on the bottom of the frame and fell to the floor of the adjacent room which was about  6 to 8 inches lower. The employee sustained a broken right hip.,1
An employee was pulling weeds by a flower bed when a rattlesnake bit her right hand. She was hospitalized.,1
"An employee was removing a die from a press. The press activated and a clamp broke apart, ejecting shrapnel that struck the employee. He underwent surgery to remove the metal.",1
"An employee was cleaning a pump. While his finger was in the pump's discharge port, the end of his right middle finger was amputated.",0
"An employee was on top of a molding machine, trying to start it, when the safety bar activated and smashed his right ring fingertip. He was hospitalized and had surgery to remove the finger above the first knuckle.",1
An employee was cutting the flange on a fire stop collar with a portable bandsaw and amputated his left index finger to the knuckle.,0
"An employee was pushing a trim bucket cart into a meat cooler when he slipped, falling on his right hip and suffering a right leg fracture.",1
"An employee was taking down a sign and used a knife to cut the strap holding the sign. The employee slipped and the knife cut his wrist, damaging the tendons.",1
"An employee was rinsing out an empty 55-gallon oil drum with hot water. The water splashed out of the drum, burning the employee's left shoulder, arm, thigh, and hip.",1
"An employer suffered a lower back injury while lifting a trailer door, and was hospitalized.",1
An employee fell off a ladder to the ground and broke his pelvis.,1
"An employee was using an oxy-acetylene torch to repair a leaking refrigeration line to a walk-in freezer. The heat ignited some oil trapped in the line. The employee suffered second-degree burns to the left arm and less serious burns to the right arm and neck, and was hospitalized.",1
An employee was working on the ground pouring five gallons of silicon coating into a tub reservoir to accommodate the pump sprayer when the employee became ill and started vomiting. The employee suffered a heat-related illness.,1
An employee was opening an airwall and got his finger caught between two folding doors resulting in a fingertip amputation. The convention center is under construction and plastic sheeting on the floor made it difficult to push the doors closed.,1
"An employee was clearing a jam in a wood chipper. As the employee dislodged the wood that was causing the jam, the chipper machine re-engaged. Wood chips flew from the chipper, striking and lacerating the his left index and middle fingers.",1
An employee was putting a finished mold (45-48 lbs.) onto a storage rack when he suffered a back injury.,1
An employee was about to clean okra cutting blades and sustained an amputation to the right middle and ring fingers.,0
"An employee was helping unload a delivery truck while an all-terrain forklift was being used to remove a stuck side gate from the truck. The forklift began to raise the gate, which was caught on a pallet. The gate came loose from the pallet and struck the employee under the chin resulting in a broken jaw.",1
"An employee was standing on a 41-inch-high railing, shifting scrap metal inside an 8-foot container. He fell from the railing to the concrete below, breaking his pelvis, clavicle, and four ribs and suffering a contusion on the back of the head.",1
"An employee was holding a turkey so it could be injected with a vaccine by another employee. The turkey jumped, and the employee holding the turkey was injected. He was hospitalized.",1
"An employee was cutting a threaded rod with a portable bandsaw. The saw jumped and struck his left hand, cutting and pulling his cut-resistant glove into the guard and amputating the tip of his left index finger.",0
An employee was setting up for a work shift and walked past a paint booth with a compromised seal. The employee then suffered an asthma attack possibly due to chemical sensitivity to the spray paint. The employee was wearing a half-face respirator.,1
"An employee was using a forklift to install a lifting beam on the top of a tower section when his finger was pinched between the beam and the forklift, resulting in an amputation of his left ring fingertip.",0
"An employee was helping a truck back up to a loading dock when his finger became caught between the truck and the dock plate and/or loading dock door, resulting in a partial fingertip amputation.",0
"An employee was climbing a ladder to nail in building siding when he became startled and fell off the ladder, hitting the ground.",1
An employee was cutting a piece of copper from an exterior wall using a 10-foot A-frame ladder when he lost his footing and fell about 6 feet to the ground. He injured his spleen and was hospitalized.,1
"An employee was using a 4"" angle grinder to cut a steel plate. The grinder kicked back, striking the employee's right knee.",1
"An employee was climbing an extension ladder when it slid sideways along the telecommunication wire it was resting on. He fell to the ground below, fracturing his right elbow.",1
"An employee was ejected out of a stand-up forklift as it turned. He struck a shelving support with the right side of his body, suffering blunt force trauma including a fractured pelvis.",1
An employee slipped and fell while carrying a tray of product into a storage cooler. The employee was hospitalized with a fractured ankle.,1
"An employee was climbing off a work truck's ladder. He fell about 3 feet to the ground, breaking his right wrist.",1
"An employee was grinding a piece of metal when the grinding wheel shattered, lacerating the employee's right hand.",1
"At 11:00 a.m. on June 21, 2018, an employee was preparing equipment for transport. The equipment shifted as he tried to remove a piece of metal from it, and his fingers were caught between the top of an A-frame ladder and the metal piece. He suffered a crushing injury and laceration, and was hospitalized.",1
"At 11:00 a.m. on June 21, 2018, an employee was splashed with Isopar. After leaving work at 5:30 p.m., he began coughing up blood and was hospitalized for chemical exposure.",1
"An employee was using a rivet gun when it cycled, pinching his fingertip between the wide internal chamber and the narrower neck of the nozzle opening. He suffered a finger amputation.",1
"An employee was on a step stool, placing merchandise on a rack against the wall. The stool broke and she fell to the ground, breaking her leg.",1
"While walking between buildings, an employee tripped on the step up onto a sidewalk. The employee fell, sustaining a hip fracture that required hospitalization and surgery.",1
"An employee was removing parts from a rotator table at a spinner machine and placing them into a bin for inspection. While the employee was at the greasing station, the greaser nozzle caused a partial amputation of their right index fingertip. The station was guarded at the time.",1
"While descending from the back of a work truck, an employee caught their left leg on an attached work light, suffering a laceration to the lower leg.",1
An employee was inspecting a vault when a water hose popped out of the top of the vault. The 180-degree water caused first- and second-degree burns to his torso.,1
"An employee was moving a 3,500-pound bundle of parts with a jib crane and a sling. The sling broke and the bundle fell on the employee, breaking his leg.",1
An employee was slicing a ham when the meat slicer cut the tip of their left little finger; the employee was hospitalized. The slicer's backplate was not in use at the time of the accident.,1
"An employee had put a pipe in a vise and was adjusting the flange to insert a ring into the unit. The unit slipped from the vise; as the pipe fell and the employee tried to grab it, the vise pinched the employee's finger. He suffered a fingertip amputation on his left hand.",0
"An employee was painting about 8 feet off the ground on a metal walk board. He fell about 8 feet to the ground below, suffering head trauma and broken vertebrae.",1
"An employee slipped and fell in a wet car wash area, breaking two bones in his lower right leg and injuring his left elbow. He was hospitalized, undergoing surgery.",1
"An employee was dropping trash off at the edge of a loading dock. She fell, landing on the ground about 4 feet below and striking her head on the wall of the dock. She suffered hemorrhaging and was hospitalized.",1
"An employee was on the back of a semi truck attaching hoses to a trailer. He fell off the side of the truck, landing on the ground about 45 inches below. He was hospitalized to treat fractures in his back.",1
"An employee was feeding steel into a punch press and removing the product. The press picked up two sheets of steel instead of one. The employee attempted to separate the steel to prevent a jam, and the machine table struck the employee while they were placing product on a pallet. The employee sustained a hairline fracture to the hip.",1
An employee was working inside the hatch of a ship's discharge pipe when he suffered heat cramps. He was hospitalized to treat heat stress and dehydration.,1
"While on foot helping offload autos from a rail car, an employee was crushed between two of the autos.",1
"An employee fell twice (once at 4:30 a.m., once at 11:30 a.m.). The first fall caused her significant pain; she also suffered a broken right hip, possibly in the second fall.",1
"A maintenance technician was replacing a belt on a beam shear drive. The drive was jogged, and the technician suffered partial amputation injuries to the middle and ring fingers of his left hand.",0
"An employee was cutting the straps holding an aluminum log, which was being carried on the forks of a forklift. The log fell, crushing the employee's right foot. The first joints of three of the employee's toes were amputated.",0
"An employee was working on a die casting machine, running an angle mold. The employee's hand was caught in a pinch point, causing a finger amputation injury.",0
An employee was placing a tray on a conveyor line when their finger was pinched between the conveyor's belt and side rail. The employee's right index and middle fingertips were amputated.,0
"An employee was unloading and stocking boxes of tile onto a shelving area when his index finger was pinched between a box and a shelf, resulting in a fingertip amputation.",0
A temporary employee shot another temporary employee.,1
"At 7:05 p.m. on June 22, 2018, an employee was bitten by a dog on the lower right arm while delivering a package to a residence. She was treated and released from a medical facility. At about 5:00 a.m. on June 23, she began to experience infection symptoms and was admitted to the hospital.",1
"The mast of a forklift came down, striking and breaking an employee's right arm.",1
An employee was folding over a rain flap on a generator to pin it before an oil rig was moved. The employee's right middle finger was caught between a pad eye on the generator roof and a pad eye on the rain cap. The fingertip was amputated.,0
"An employee was setting up and adjusting a milling machine. While one of the machine's gearbox doors was open, the machine activated and the gearbox pinched the employee's left thumb, causing a partial amputation.",0
An employee was rolling a piece of wire and pinched their left middle finger against the other roller resulting in amputation of the finger.,0
"An employee was assaulted by a client while providing home health care. The employee suffered a concussion, contusions, and abrasions.",1
An employee fell through or over a residential balcony's guardrail to the ground 21 feet below. The employee suffered a collapsed lung and fractured vertebrae.,1
"At about 8:30 a.m. on June 22, 2018, several employees were working to change a mold. The mold fell onto an employee, severely crushing his legs.",1
"An employee was troubleshooting a CNG machine. While his left hand was on top of it, it engaged and rotated. His left middle finger was amputated just below the nail. The machine was in manual mode at the time.",1
"Two employees were removing the condenser head of a chiller. While the head was suspended, it pivoted, causing one employee's finger to be caught between a bolt and a hole. The finger was amputated.",0
An employee's left little finger was pinched in a door jamb causing a fingertip amputation.,1
"An employee was working near a 13,200-volt switchgear cabinet. An arc flash severely burned the employee's face, neck, and chest.",1
"An employee was preparing a metal drip edge on a roof. The employee fell from the roof, breaking both heels and one tibia.",1
"On June 22, 2018, an employee was attacked by a nursing care resident while trying to usher the resident back to his room. The employee was hospitalized.",1
"An employee was positioning a support block under a generator enclosure. The enclosure was set down, catching the employee's right thumb between itself and the block. The employee suffered a partial amputation of the right thumb.",0
"An employee was walking in an ice house when he stepped on a roller bearing access cover, causing his left foot to fall into an auger. He suffered a laceration to the foot and a fractured toe.",1
"	An employee was helping unload an aircraft pallet when it ran over his left foot. He was hospitalized for surgery. His big toe was partially amputated.",1
"While doing steel erection work, an employee fell 20 feet to the ground, breaking both heels. He was not tied off at the time.",1
"An employee was opening a door when a strong wind pushed it shut. The tip of the employee's left index finger was trapped between the door and the frame, and was amputated to the first bone.",0
"An employee was troubleshooting a manufacturing robot. A drive belt and pulley caught the employee's right index finger, causing an amputation.",1
An employee was lifting a piece of aluminum guttering to install on a gas station canopy when it contacted a high-voltage power line. He suffered electrical burns to both hands and a foot.,1
"An employee was struck by an unchocked car in a fenced area, suffering a broken leg.",1
"An employee was hanging conduit using an 8-foot ladder. He fell to the floor, suffering a concussion and broken ribs, pelvis, and thumb.",1
"An employee was pulling weeds, helping another employee prune shrubbery. The other employee's clippers caught the employee's right index finger, causing a partial amputation and a bone fracture requiring hospitalization.",1
An employee slipped on a puddle of water and fell as she entered the facility. She suffered a torn hamstring and was hospitalized.,1
An employee experienced muscle cramps while rigging up isolation tools. The employee was hospitalized for dehydration.,1
"An employee was transferring cattle to a corral when a cow charged and trampled him. He suffered lacerations to the back of his skull and his bottom lip, as well as contusions on the right shoulder, right leg, left knee, and left leg.",1
"An employee was removing a sock from the inline filter at the filler after a hot water wash. When he removed the clamp, hot water sprayed onto his right side in areas from his neck down to his legs and onto his back. He suffered second-degree burns.",1
"An employee fell from a 6-foot A-frame ladder, and their head struck the concrete floor. The employee suffered a fractured skull and bleeding in the brain.",1
An employee just accessed a roof and fell off to the ground below sustaining an ankle and sacrum fracture. Fall protection was not worn at the time.,1
"While an employee was climbing off a barge that had just been unloaded, he fell head first onto a vessel deck. He suffered lacerations to the back of his head and his right knee.",1
"An employee slipped and fell on a muddy concrete floor as he was going around a corner, fracturing his left hip.",1
"An employee was using a radial arm saw to cross-cut boards. A piece of wood got stuck behind the return device; while trying to clear the jam, the employee suffered a partial amputation of the left index finger.",0
"On June 23, 2018, an employee was trying to remove a tube that had jammed in the in-feed rollers of a tube cutter. The roller's caught the employee's left glove, pulling in their fingers. The employee suffered an amputation injury to their left index finger.",0
"An employee had just finished servicing a belt on a vehicle. As he was inspecting his work, his hand contacted the belt and the tip of his right index finger was amputated.",0
"On June 23, 2018, an employee was operating a tube bender machine while sitting on a chair. The machine actuated, and the employee's finger was caught between the clamp and the metal piece; the employee suffered an amputation to the tip of the right index finger.",0
"At 11:40 a.m. on June 23, 2018, a conveyor jammed while an employee was sorting garbage. As he attempted to clear the jammed conveyor belt, his hand was caught and his right little finger was amputated.",0
"An employee was cleaning up a work area when a piece of a metal panel fell from a set of sawhorses. It struck his foot, severing the Achilles tendon.",1
"An employee was installing tile when an abrasive wheel grinder kicked back, striking him in the left shin. He was hospitalized.",1
An employee's finger was smashed in the pinch point of a buggy and a tugger. The finger was medically amputated.,0
"An employee slipped and fell on a floor, wet from condensation, in front of a lab incubator. The employee suffered a fractured left patella.",1
"An employee tripped and fell as he entered a diked area. He struck a ground-level grating, suffering a broken tooth, a nose laceration, and neck pain.",1
"An employee was strapping cargo in a trailer when he fell from the trailer, landing on the concrete about 48 inches below. He suffered a fractured hip.",1
An employee was backing a center control pallet jack into product and struck racking crushing the employee's right thumb.,1
"An employee fell on a freshly mopped tile floor, suffering injuries to her left arm and knee. The muscle separated from the bone on the knee, requiring surgery.",1
"A bailer operator was fixing a wire from a bailer unit. The bailer's hook caught his left wrist, lacerating it. He was hospitalized.",1
"An employee slipped and fell to the ground while walking from her car into the building, fracturing her right ankle.",1
"At about 11:30 a.m. on June 24, 2018, an employee opened the doors of a shipping trailer and was struck in the head by an empty plastic drum weighing about 23 pounds. The employee was hospitalized.",1
An employee was driving a mule truck. The employee was inside the mule truck when a crane lifted a container on the truck bed. The employee struck her right hand inside the truck and suffered multiple hand fractures.,1
An employee was placing a channel iron inside an automated vise to secure the iron for cutting with a bandsaw. The vise automatically closed while the employee's left ring finger was between it and the channel iron causing an avulsion injury and hospitalization.,1
"On June 24, 2018, an employee was working in the warehouse to prepare the upcoming week's jobs. He used an extension ladder to try to retrieve a dolly from a box stored on a mezzanine. The ladder slipped out and the employee fell to the floor, breaking his hip and foot. His injuries required surgery and hospitalization.",1
An employee was making adjustments to the hamburger press when his left thumb was caught between the top and lower part of the press resulting in the amputation of the tip of his thumb without bone loss.,1
"An employee opened the inspection lid of a tank to see if the water in it was boiling. Hot water splashed out, causing second- and some third-degree burns to his torso.",1
"Two employees fell while installing second-floor decking. One employee fell approximately 10 feet to the deck below and sustained facial lacerations and fractured the C7 vertebra requiring surgery and hospitalization. The second employee sustained a muscle strain and bruising on the chest, shoulder and back from the retractable lanyard. Both employees were wearing retractable lanyards at the time of the incident.",1
"On June 25, 2018, an employee was using a chainsaw to trim dead branches from a magnolia tree. He was 2.5 feet off the ground, standing in a tree notch, when he fell. The chainsaw lacerated his left forearm. Fall protection was not worn at the time of the incident.",1
"An employee was penning cattle. The employee's horse fell over on top of him/her, causing a laceration to the upper right leg, a leg fracture, and a crushed pelvis.",1
"On June 25, 2018, an employee's right femur was fractured as the employee stepped up onto a curb.",1
"On June 25, 2018, an employee was using a hydraulic press brake to square up two 90 degree bends in a steel product. When the ram came down, his left index finger was pinched and crushed between the brake and the product, leading to an amputation of the fingertip.",0
An employee was experiencing cardiac stress while collecting recycling resulting in hospitalization.,1
"An employee fell from a step stool to the ground, fracturing her right wrist.",1
"An employee was climbing down a fixed vertical ladder when he fell to the floor. He suffered a back injury with broken bones, and was hospitalized.",1
"An employee was attempting to wipe grease from a stay rod nut. A torque wrench (connected to another stay rod nut) engaged and pinched the employee's right little finger, amputating the tip.",0
"On June 25, 2018, an employee was using a sling to offload 120-gallon tanks from the back of a truck. He fell from the truck to the ground, sustaining a lumbar compression fracture.",1
"At about 5:45 p.m. on June 25, 2018, an employee's hand was caught in the nip point of two press rollers and injured. The employee was using a tool to remove paper from the rollers and his hand was pulled in while the rollers were coasting to a stop. He suffered fractures and degloving.",1
"An employee fell between a trailer and a loading dock, suffering a laceration to the left shin.",1
"An employee slipped on a patch of grease/oil on the floor and fell. The employee's face struck a metal basket, causing a fracture to an orbital bone.",1
An employee was pushing a machine down a gravel ramp when the machine pinned the employee against a beam. The employee suffered a back injury.,1
"An employee was adjusting the air pressure on a log kicker when their finger was caught, resulting in an amputation of the left middle fingertip. The machine was guarded at the time.",0
An employee was closing a loading dock's rolling door when his left ring finger was caught between the door and the metal plate ramp. He suffered an amputation injury to the finger.,0
"An employee was responding to a ""rapid response team"" page. While avoiding a collision with another person, she fell, striking a wall corner. She suffered a fracture of the right humerus, as well as a partial avulsion of the right middle fingernail and a minor scratch over her left eyebrow.",1
"An employee was cleaning a label machine. He was jogging the machine and cleaning glue off the glue roller when the sponge he was using got caught between the roller and the pallet, pulling in his fingers. Part of his right middle finger was detached and the tip of the ring finger was crushed.",1
"An employee was climbing down an 8-foot ladder when an air hose became caught. While trying to free it, he fell from the ladder to the floor, suffering several broken vertebrae.",1
"On June 25, 2018, an employee was struck by a forklift. She was hospitalized with a hip fracture.",1
"An employee was guiding a crane load from a scaffold. The scaffold gave way and the employee fell to the ground, suffering leg injuries. The employee was hospitalized.",1
"An employee was moving a temporary switch gear with a pallet jack. The gear rolled off and fell onto the employee's right leg, breaking two bones.",1
An employee's foot was caught by a wood pallet while she was sitting in a chair. She suffered fractures.,1
"An employee was climbing down a ladder to weld a joint inside a tank that was being built when the ladder slipped out from under him. He fell 6 feet, landing on his feet and breaking his tibia in three places.",1
"An employee was cleaning liner to the bucket truck and fell to the ground 9 feet below. He suffered a broken vertebra in his lower back, as well as two cut fingers. He had not been tied off at the time of the incident.",1
An employee suffered a back injury while reaching into a cooler to retrieve a water bottle.,1
"An employee was using a crane on a truck line, lowering a part into place. His thumb was caught and injured between the frame and the dog bone.",1
"An employee fell from a 47-inch-high baker scaffold to the floor, suffering broken ribs. The employee was hospitalized.",1
"An employee fell over a forklift's fork, landing on the floor and suffering a fractured left hip. He was hospitalized.",1
"While working on a metal roof, an employee suffered shortness of breath, lightheadedness, and chest pressure. He was hospitalized for heat stress and dehydration.",1
"An employee was bitten by a spider in the office. She experienced swelling and pain on her left leg, and was hospitalized.",1
"An employee was adjusting pins to get a concrete pouring machine into position. A spring-loaded pin came out of the machine and struck his hand, causing an amputation to the tip of his right ring finger. The machine was not locked out or tagged out at the time of the incident.",1
"On June 25, 2018, an employee was pinching the metal pins (weighing about 25 pounds) out of an 18-wheeler flatbed truck, preparing the bed for a new load of steel I-beams. One of the pins caught his cloth causing him to lose balance; he fell to the concrete floor, breaking several ribs and his collarbone.",1
An employee was using a meat slicer and amputated the tip of her right thumb.,1
"An employee was repairing an exhaust blower on a tugboat. The blower sucked his hand in, causing the amputation of his left index finger.",0
"On June 25, 2018, an employee's right foot was crushed by scrap metal falling from a roll-off box that was being unloaded. He suffered a fracture and was hospitalized.",1
An employee was monitoring a wood chipper when a piece of wood was dislodged from the chipper and struck his index finger. The fingertip was surgically amputated.,1
"An employee tripped and fell in a hallway, suffering a fractured hip. The employee was hospitalized.",1
An employee was walking on a conveyor belt when his left foot went through the conveyor belt and was fractured. He was hospitalized.,1
"On June 25, 2018, an employee was fixing a leak in a liquid dish bottle labeler when the machine started up, fracturing both of the employee's hands.",1
"On June 25, 2018, an employee's head struck the door frame of a mail truck. He was hospitalized.",1
"An employee tripped and fell out of a tractor trailer, striking the ground. She suffered a fractured orbital bone, fractured neck vertebra, and laceration to the face.",1
An employee's ankle was pinned against a warehouse rack while he was operating an electric pallet jack.,1
"An employee was using an ATV to spray weeds. The ATV rolled over on an embankment, injuring him.",1
"An employee was using a handheld grinder to grind off a bolt on a mower that was stuck when the grinder kicked back and the handle hit the employee's right eye, causing a retinal detachment.",1
"A baseball pitcher was struck in the right lower jaw by a line drive baseball, suffering a fractured mandible.",1
An employee was performing a headboard change out on a mold machine. The employee stepped back onto a limit switch causing the hydraulic pusher to traverse and catch the employee's left foot between the 900 psi hydraulic pusher and a fixed portion of the roller conveyor. The employee's left foot was fractured. The conveyor with hydraulic pusher was not locked out/tagged out at the time.,1
"An employee was walking down a stairway when she fell down the last two steps to the landing, breaking her tibia in three places.",1
"An employee was walking down a flight of stairs in front of the building, fell down the stairs and broke both ankles.",1
An employee was digging a pole hole inside a construction work zone on a city street when a motorist who had fallen asleep at the wheel drove their car into the work zone and struck the employee. The employee suffered a right leg fracture.,1
"An employee was adjusting the lever on a bandsaw. The employee's hand contacted the saw blade, and the employee sustained a partial amputation to the right thumb tip.",0
"An employee was loading the engine pistons and cylinder liners onto a pallet to remove from the area for housekeeping purposes. He lifted the last piston by placing his fingers into the large holes on each side of the piston. The piston did not have rings installed on it. When he sat the piston (98 pounds) on the liner it slid into the liner catching two of his fingers between the piston and the liner, amputating the tips of two fingers on his left hand.",0
"An employee experienced severe pain, back spasms, wrist numbness, and an inability to support himself to walk after coming down from a 4-foot loading dock with a heavy leaf spring (approximately 75-100 lbs.). He was hospitalized.",1
"An employee's left middle fingertip was caught, crushed, and amputated by a stacker/rake machine.",0
An employee was using an angle grinder on a bearing pack for a snow groomer. The grinder slipped and cut the employee above his glove on the forearm. He was hospitalized for surgery.,1
An employee was working on the assembly line with specialized machinery and suffered from heat exhaustion.,1
An employee was loading a truck with plywood when his ring became caught on a rack and ripped his left ring finger. His finger was later surgically amputated.,1
An employee suffered heat exhaustion while working on a rooftop. The employee was hospitalized.,1
An employee fell while getting into his truck and injured his head.,1
An employee was taping liner on a combo when he tripped over the corner of a pallet and fractured his tibia.,1
An employee was working on an egg processing line (boil and peel machine) and amputated a fingertip after contacting the moving rollers. The machine was guarded at the time.,0
An employee was coming in out of the rain when the wind blew the door shut on his right middle finger. The fingertip was amputated.,0
"An employee was in a loading dock, staging and sorting auto parts. He slipped or tripped on tailgate liners that had fallen to the concrete floor, striking his head against the floor.",1
An employee experienced heat-related dizziness and lightheadedness. He was hospitalized.,1
Two employees were lowering a jumping jack into a 2-foot trench. One employee's left hand was caught between the handle and the roller; the employee suffered a broken little finger and a broken ring finger and fingertip amputation (without bone loss).,0
"An employee was walking next to a ramp while a forklift was bringing a 10-foot wooden crate down the ramp. The crate's door swung open; the employee was trying to close it when the forklift began moving backward. The employee's right arm was caught between the door and a metal beam, causing a substantial laceration near the elbow.",1
An employee was helping to unjam a trimmer machine when it amputated his left index finger.,1
"An employee was picking up a box that had fallen off a pallet. A nearby stacked pallet of boxes became unstable and fell, breaking the employee's femur.",1
"A metal valve attached to a flow line fell over, striking and lacerating the employee's left calf.",1
"On June 26, 2018, an employee suffered a broken wrist after falling 5 feet from a scaffold to the floor while reaching to apply insulation in a ceiling joist.",1
An employee was using a press brake to form a metal part. The employee's right middle finger was caught between the part and the mold; the fingertip was amputated.,0
"An employee was on a mobile ladder stand clearing a stacker transfer when she slipped and fell, striking her face on the concrete floor. She suffered a fractured cheekbone.",1
"An employee was loading and unloading fiberglass blanks on a heated hydraulic press. One of the press's cylinders broke and the platen dropped onto the employee's right hand, resulting in the amputation of four fingers.",0
An employee was topping leek bunches when her harvesting knife cut a one-inch flap of skin off her left thumb.,0
"An employee was operating a powered pallet jack when his foot became caught between the pallet jack and the floor, breaking his left leg.",1
"An employee was opening a 4-inch condensate line to replace a gasket. Hot condensate steam was released from the flange, burning the employee's elbow and hand.",1
"An employee slipped and fell down a wet staircase, suffering nerve damage.",1
"An employee was connecting a new transformer while in a bucket truck. The pole was a three phase tangent with a single phase tap. The employee's arm contacted the bottom of the cut out fuse serving the single phase line. The line fuse blew on contact, and the employee suffered burns to the arms and back that required hospitalization.",1
An employee was removing a piece of lumber from the conveyor and her finger was caught in between a belt and pulley system causing an amputation injury.,0
"Two employees collided; one fell, suffering a broken hip.",1
"An employee was shoveling material to expose a temporary drainpipe. A piece of clay/rock rolled down an embankment and struck the employee's lower left leg, breaking it.",1
"An employee was climbing a ladder to wash fourth-floor windows. The ladder slipped on a wet surface, and he fell about 8 feet to the third floor platform. He was hospitalized with a neck injury.",1
"An employee was walking around the corner of a foundation under construction, tripped and fell into rebar, suffering a laceration to his inner right thigh.",1
"An employee was on a ladder over an extrusion machine, handling a 1,500-pound screw that was hanging from a crane. The employee felt as if he would fall and grabbed the screw. The screw then swung and crushed his right little finger against the machine. He suffered an avulsion and broken bones and was hospitalized.",1
"An employee was operating a punch press when a piston came loose, striking the employee in the abdomen. The employee suffered a laceration/puncture injury.",1
"An employee was placing cribbing to accommodate a load from a forklift. The load was lowered and came down onto the employee's hand, leading to a partial amputation of his right ring fingertip.",0
"An employee was changing a die in a machine. After locking/tagging out the machine, the employee removed a pin securing the die in place. While the employee's hand was between the upper and lower dies, the upper metal die fell due to gravity and crushed the employee's hand between the two dies. The employee's hand suffered bruising.",1
An employee was doing a compression test on an engine when diesel fuel was injected into his hand.,1
"On June 26, 2018, an employee was maintaining overhead ductwork and ceiling tiles. The employee fell from an 8-foot stepladder to the tile floor, suffering two broken wrists, broken ribs, brain bleeding, cracked vertebrae in the neck, and a broken shoulder.",1
"An employee was cleaning up saw dust with compressed air when the air hose became entangled in the batten saw guide chain table, pulling it into the saw box. The employee shut down the chain table, reached for the hose inside the saw box, and contacted the saw blade, suffering  lacerations and broken bones to the right ring and middle fingers. The saw was still energized at the time of the incident.",1
"While disconnecting a strap at the back of a flatbed truck trailer, an employee fell from the side of the truck, landing on wood mats about 5 feet below. The employee suffered a broken nose, broken ribs, broken teeth, fractured sinus cavity, fractured wrist, and facial lacerations. The employee was hospitalized.",1
"An employee was placing dunnage between concrete telephone poles. A pole was lowered onto another pole by crane, and the tip of the employee's right index finger was crushed.",1
An employee suffered smoke inhalation during a building fire and was hospitalized.,1
An employee was making hamburgers on the hamburger press when his left thumb got caught between the top and bottom part of the press resulting in the amputation of the tip of his left thumb without bone loss.,0
An employee was working on a construction site finishing concrete and was hospitalized with heat illness.,1
An employee fell off a metal roof sustaining leg fractures and a dislocated shoulder.,1
"An employee was operating the lift gate of a truck when his hand was caught between the lift gate, resulting in an amputation of two fingers.",0
"An employee was walking on the crane deck when he slipped and fell into the engine compartment, breaking his left arm and requiring hospitalization.",1
"An employee was replacing an underground transformer when an arc flash occurred, causing a second degree burn to his left forearm. He also fell forward, striking his head on a distribution service bar and suffering a laceration.",1
An employee was struck by a lock ring fracturing his lower right leg while inflating a tire.,1
"An employee was climbing a ladder to clean gutters on a house, mis-stepped and fell to the ground. The employee sustained a pulled muscle that lead to a blood clot and hospitalization.",1
"An employee was loading sprockets in the load station when a pneumatic malfunction occurred and the employee's left thumb was pinched, resulting in a partial amputation with tuft exposure/fracture.",0
An employee was working on the muller putting parts on it. The employee reached up on an I-beam to move himself and when he stepped back down his knee twisted and his femur was fractured.,1
"An employee working on a utility pole fell approximately 13 feet to the ground below, fracturing the left leg.",1
"On June 27, 2018, at 1:30 p.m., an employee was adjusting an off-balance rotating rack so it could accommodate a different sized wire when the rack spun quickly and pinched his right index finger, severing the fingertip.",0
An employee was using a scraping tool (located on the mixer's door) to remove resin from the bottom of the mixer when the door of the machine closed on the employee's arm pulling his arm into the drop area. The employee was admitted to the hospital with a fractured radius and second degree burns to the arm.,1
"An employee was operating a grinder in an aerial lift when the grinder struck a structure, bounced back, and struck the employee's face, causing a deep laceration.",1
An employee fell from a three-step step ladder to the floor and sustained a head laceration and broken ankle.,1
"An employee side stepped and then tripped and fell. When he reached his arms out to brace for impact, his right arm entered a mop cart of hot asphalt and sustained burns from the top of the hand to just below the elbow.",1
An employee was closing a door when the knife edge of the door closed on and amputated her right pinky finger.,1
An employee fell off the top of a liquid tanker/trailer while washing it and sustained a head injury. Fall protection was not worn at the time.,1
An employee was operating an industrial band saw to cut sprues from bronze castings when the employee lost consciousness due to severe dehydration. The employee was hospitalized.,1
An employee was working in the flow coat furnace area and was hospitalized for heat stress.,1
"An employee was leaving the break room and pushed open the right-side door. Instead of exiting through the door, he turned back into the break room to throw away thrash in a trash can located immediately to the right side of the exit door. As he leaned towards the trash can, he placed his left hand on the door frame with his little finger between the door and the door jamb. When the door closed, it pinched his left little finger, resulting in a fingertip amputation (without bone loss).",0
"An employee was dry sweeping the floor when she slipped and fell, twisting her right ankle.",1
An employee was pouring gas into a gasoline-powered pump when the gas ignited and burned the employee's chest and legs.,1
A journeyman electrician was removing wires from a panel. The wire was tied to another cable and when he pulled the wire it pulled the other cable into a bus bar in the gear causing an arc flash and electrical burns.,1
An employee was assisting others in a team lift effort to put a large bumper into the back of a truck and suffered a herniated/ruptured disk requiring surgery.,1
"An employee was walking down the corridor, tripped on the base of the fence post and fell breaking a hip.",1
"On 6/27/2018, an employee was attempting to remove a bolt from the control arm of a disassembled train locomotive wheel assembly. After he removed the nut, the arm shifted due to its weight and came down on his right middle finger, resulting in an amputation to the first knuckle.",1
An employee was pulling tape through an underground PVC electrical conduit to measure the conduit length. The tape contacted some moisture that created an arc flash when it came in contact with the energized switchgear. The employee suffered second degree burns on both arms. Proper PPE was not worn at the time of the incident.,1
An employee was operating equipment that stacks used bun trays and started to have cramps. The employee was hospitalized for heat stress.,1
"An employee suffered a hernia rupture while loading bags from a conveyor onto a plane, requiring hospitalization and surgery.",1
"An employee fell while walking up steps into the office, fracturing her leg.",1
"An employee was delivering mail when he felt unwell due to heat-related illness, requiring hospitalization.",1
An employee lacerated their forearm while using a boot knife to cut tape from the trim puller.,1
An employee was pushing open a door and caught a finger between the door and the frame at Disney's Hollywood Studios. The employee sustained a middle finger fracture and a fingertip laceration.,1
"An employee was attempting to retrieve a piece of rubber from a guillotine cutting machine when the machine was actuated. The guillotine blade then dropped from its housing and amputated the employee's left hand at its midpoint, severing four fingers and half of the thumb.",0
"An employee was attempting to clear a wood jam in a five-headed saw when his right hand entered the machine and contacted the blade, injuring his right thumb and resulting in a partial amputation.",0
"An employee was removing a jammed piece of glass with tongs when the glass punctured through the employee's glove and cuff. The glass lacerated the employee's wrist and became embedded in it, requiring hospitalization.",1
"An employee was manually turning a V-belt drive and belt on an air handling unit when his hand and glove were pulled into the belt and pulley, amputating his left pinky fingertip below the first knuckle.",0
"An employee was standing on a ladder that had been placed on a material lift and was adjusting the gear box on the material lift when he fell, fracturing a rib and puncturing a lung.",1
"An employee was ascending a tree while carrying a pruner tool to prune around utility lines. He reached his area and hung the pruner on a limb above his position. The limb broke and the pruner fell, striking and piercing his left forearm. He was hospitalized.",1
An employee was working at a press when a slider pulled his left hand into the press. He suffered second and third degree burns.,1
An employee was adjusting plates on a printing press and caught a finger in the gears resulting in a partial amputation to his left middle fingertip.,0
"A pool technician was adding water to chlorine shock powder and sustained chemical burns to the face, arms, back, and legs when chlorine foam erupted from the container. The employee was hospitalized.",1
An employee was placing material on the roof as part of a retro-fit project. The employee laid the material down to measure so he could cut it to the proper size. The employee then fell about 10 feet from the roof causing a broken clavicle. Fall protection was not utilized at the time.,1
"An employee caught their leg brace on a work desk, fell to ground, and was hospitalized for a fracture leg.",1
"An employee was getting out of a dump truck and facing the truck with three points of contact. As he stepped onto the slip-resistant tread, his foot slipped off and he fell backwards, striking his head on the step of a backhoe that was parked next to him. He suffered a head laceration and lost consciousness.",1
"An employee was working on a conveyor on the sorting deck when the employee's hand was caught in the moving conveyor, requiring hospitalization and surgery. The conveyor was unguarded at the time.",1
"An employee slipped and fell to the ground while walking in a puddle of water in the parking lot, fracturing the right ankle.",1
"An employee was helping to move a patient on a stretcher into an elevator when the employee tripped while going backwards and fell onto the right buttock, fracturing the right hip.",1
"On June 27, 2018, at approximately 11:00 p.m., an employee was injured while winching a derailed coal car. During this procedure a piece of metal came off the car and struck the employee in the stomach and upper right arm. The employee was hospitalized for a severe laceration to the upper right arm.",1
"Three employees were moving a tool from the wash bay to two tool stands. The rear tool stand became caught on the lip of the floor and collapsed, causing the tool to fall off the stand. One of the employees attempted to catch the tool, resulting in it falling onto and amputating his left small finger.",0
"An employee was laying decking material for a reinforced concrete roof. The employee was not able to get decking material under a piece of bent rebar. The employee was attempting to bend the rebar up when it suddenly became free from the cinder block wall, causing the employee to lose balance at the leading edge and fall approximately 10 feet to the floor. The employee fractured the left wrist and femur.",1
"An employee was disconnecting a breaker attachment from a backhoe. He used another pin to push the attachment pin out. When the attachment pin became free of the backhoe, the attachment dropped slightly, causing the pin in his hand to shift and pinch his left pinky finger between the attachment frame and the pin. His left pinky fingertip was partially amputated.",0
An employee lost balance and fell resulting in a left tibial plateau fracture.,1
"An employee fell off the second step of a step ladder while installing a vacuum hose on a plastic injection mold machine. The employee fractured the right leg below the knee, requiring hospitalization and surgery.",1
An employee was delivering mail when a wasp flew into the vehicle and stung the employee.,1
"On June 27, at around 12:55 p.m., an employee was operating a powered pallet jack when they became pinned between the pallet jack and a bollard, suffering fractures to the left pelvis, hip, and tailbone. The employee was hospitalized.",1
An employee was trying to assist a patient and suffered a dislocated shoulder and muscle strain to the back.,1
An employee was installing a machining center when the employee's right index fingertip was amputated by a ball screw on the machining center's horizontal axis.,1
"An employee was removing a meter when a dog chased him and he broke his right ankle in two places, requiring hospitalization.",1
"The employee was replacing an O-ring that sits on top of a hydraulic oil accumulator tank. The O-ring seals the accumulator tank and the oil manifold to the central cylinder, which had been removed for repair. The employee used a hydraulic jack to raise the oil manifold approximately 1 inch to allow for installation of the O-rings and the central cylinder. The jack slid from its position and the manifold dropped back to its normal resting position, striking and pinching the employee's right thumb. The employee sustained a fracture and open laceration to the thumb, near the knuckle joint.",1
"An employee unloaded a beam and laid it down. While attempting to remove chains from underneath the beam, the beam slipped and crushed the employee's leg between the beam and a pipe. The employee sustained a compound fracture to the lower left leg.",1
"An employee tripped and fell while walking, suffering a compound fracture of the left ankle that required hospitalization and surgery.",1
An employee slipped and fell into a puddle of sulfuric acid resulting in a chemical burn.,1
An employee struck his foot with a pitchfork and was hospitalized.,1
An employee was moving concrete forms when a five inch concrete form fell on top of him.,1
"An employee was producing a roll of metal building insulation on the laminating machine. While trying to fix a problem with the machine, the employee's left hand was pulled between two rollers and causing a left forearm fracture.",1
"A delivery driver was out on route, overheated and lost consciousness. He then fell and hit his knee. He was admitted to the hospital the next day for IV fluids and observation. He also fractured his knee cap.",1
An employee was pulling a pallet jack and it rolled over his left foot. He then fell to the ground breaking his right proximal femur.,1
"On 6/27/2018, at approximately 4:30 a.m., an employee was cutting a tree off a power line when a limb popped back and struck his side. He suffered fractured ribs and a chest contusion, requiring hospitalization.",1
An employee suffered an amputation to the right ring finger while working with a crane. The employee was injured by an engine turbo charger fan.,1
A furnace operator was hospitalized for heat stress.,1
"An employee was grinding a part when the grinding wheel caught the tip of his glove, pulling his finger into the grinder and resulting in a fingertip amputation.",1
"Employees 1 and 2 were using a winch to load equipment onto a trailer. As employee 2 went to loosen the winch, employee 1's hand went between the equipment and the winch strap. Employee 2 accidentally tightened the winch instead of loosening it, trapping employee 1's left hand and resulting in a left index fingertip amputation.",0
A student wildland firefighter was being trained on a prescribed burn and was hiking up a 2.5 mile incline when he began to have a rapid heart rate and difficulty breathing. The student was hospitalized.,1
An employee was troubleshooting the conveyor and severed the distal tip of his right index finger when his right hand contacted the chain and gear.,0
An employee was installing satellite TV at a private residence and passed out due to heat illness.,1
An employee was troubleshooting the raw bacon packaging machine. The employee's left hand was in the machine when it cycled resulting in amputation of the left index finger to the first knuckle and amputation of the left middle finger to the middle of the finger nail.,0
"An employee was walking in the basement of the building and fell over, breaking seven ribs and her wrist.",1
"An employee was diagnosing an electrical issue on a skid steer when the unit knocked the employee to the ground and rolled up onto his leg. The employee sustained a dislocated left ankle, fracture left knee, and muscle damage to the left side of his body.",1
"An employee was driving a trap rake vehicle to a golf course bunker to rake. The employee's glasses became foggy/wet due to inclement weather. As the employee attempted to clean his glasses, the vehicle overturned into a ditch/embankment and landed on the employee. The employee sustained a mild concussion, ruptured appendix, and a laceration to the left side of the head.",1
An employee was working on an elevated screw conveyor to repair a leak when his left hand slipped and his left index finger slid into the conveyor amputating it at the first knuckle.,0
"An employee was walking on a grassy area at the facility when they stepped in a low spot concealed by the freshly mowed grass. The employee twisted their left ankle and fell on their right foot, sustaining fractures to both ankles.",1
An employee was installing a line to a camera outside a residential home. The employee tripped while working from an A-frame ladder in the closed position and sustained a small fracture to his left ankle.,1
An employee was on a bakers scaffold when it tipped over and the worker fell six feet. The employee sustained a broken wrist and a dislocated hip.,1
"The employee was sitting at the machine lowering the bowl on a spindle while welding areas of the mixer bowl. The lip of the mixer bowl became trapped on top of his knee, pushing his foot (which was operating a speed pedal) downward and trapping his lower leg. The employee required assistance to remove him from the machine. The employee sustained a right knee sprain.",1
An employee was cutting a piece of wood on a rip saw when a piece of wood impaled the worker's arm.,1
An employee was delivering parcels and suffered dehydration related to the heat.,1
An employee was checking an order being pulled for shipping when a stack of finished product toppled over onto him and knocked him to the floor. The employee was hospitalized with a fractured left femur.,1
An employee finished unloading building supplies on the roof and was descending the ladder. The employee fell from the ladder and broke bones in the left leg.,1
"An employee was walking into the store, tripped over the front step and fell resulting in possible fractures.",1
An employee was performing routine maintenance on the proctor machine (compacts soil into a steel mold). The employee's left index finger was caught in the hammer resulting in a fingertip amputation.,0
An employee was cutting wood with a saw. The saw kicked back and caught his glove and amputated his left pinky finger.,1
"An employee delivered the mail and while descending the steps, misstepped, and fell injuring the left ankle.",1
"An employee was repairing an axle on a mobile home that was set on blocks. During repair, the home shifted and fell off the blocks onto the injured employee who was sitting underneath. The employee's upper body was pushed over onto the lower body causing a fractured back.",1
"Two employees were moving soil in a large dump truck. The lid on the dump truck was stuck; while one of the employees was removing dirt to free it up, the lid came down on his hand. His right middle finger was amputated to the first joint.",0
"An employee was altering a costume. While cutting fabric with scissors, the employee's left index fingertip was amputated.",0
A forklift was transporting two stacked intermediate bulk containers (IBC) which are plastic containers in a metal cage. The IBC containers fell off the forklift and struck the injured employee in the face causing a fracture to the left cheek and nose.,1
An employee was on the loading dock and was struck by a reach truck causing pelvic and tibia fractures.,1
An employee was helping a patient walk at the patient's residence. The patient started to fall and the therapist got her arm caught and broken between the patient and a wheelchair.,1
"An employee was walking and while turning a corner, the employee's pant leg got caught on a corner of a shelf. The employee then tripped over a tote and fell to the ground onto their right hip. The employee suffered a hip fracture and contusion.",1
"On June 29, 2018, an employee was descending a three to four-foot ladder after replacing a light bulb and fell off the ladder. He suffered a broken hip and cuts on his elbow from the broken glass.",1
An employee was operating a pallet jack and got their foot caught between the jack and a rack guard resulting in multiple toe amputations.,1
An employee was providing care to a patient aboard a fixed wing aircraft in transport to the hospital. The aircraft encountered clear air turbulence and the employee struck the cabin ceiling causing brain and spine contusions.,1
An employee was hospitalized for a heat-related illness.,1
"An employee was working with a demolition crew on a bridge deck set up below an overpass. While working from a horizontal shield, the employee fell approximately five feet through an opening in the shield and onto the bed of a company dump truck that was parked directly below, suffering a bruised hip.",1
"On June 29, 2018, an employee fell into a trench containing hot fluids (150 degrees F) and sustained second degree burns to the legs requiring hospitalization.",1
An employee was operating a press when the V-block cracked and shot out breaking the employee's finger.,1
An employee was disassembling a switch on the extruder machine when an arc flash occurred and burned the employee's face and body.,1
An employee was standing on the lift gate of the delivery truck directing the driver to back up.  He fell off of the lift and was caught between the truck and a moving vehicle. The employee sustained rib and spleen injuries.,1
An employee was hospitalized over the weekend due to heat-related symptoms.,1
An employee was hospitalized for illness due to dehydration.,1
"An employee exited her vehicle to make a delivery, tripped over the curb and fell to the ground resulting in a broken arm. She was admitted to the hospital.",1
An employee was carrying an extension receptacle outlet (240 V) up a flight of process equipment stairs. The receptacle contacted the stair handrail at which time the employee experienced an electrical shock for an extended period of time.,1
"On June 29, 2018, an employee was attempting to clear plastic from a granulator when his left middle finger contacted the grinder blade amputating the fingertip.",0
"A temporary employee tripped over an empty, wheeled dolly and fell to the floor.  The employee was admitted to the hospital for a broken wrist or elbow.",1
An employee was operating a ladder machine and suffered the partial amputation of the right pinky finger.,0
An employee was inspecting pipe. The employee walked through a rack opening and was struck by a 4.5 inch pipe in the abdomen while the pipe was being passed through the rack. The employee suffered lacerations to the liver and bowels.,1
An employee was operating the descrambler machine. His left pinky finger was partially amputated when his glove was pulled into the machine belt.,0
"An employee was walking down the hallway, slipped and fell breaking her left arm.",1
An employee was cutting the coke or removing the coke from the drum to the loading area. Steam was released during the coke cutting process and the employee suffered burns to the neck/jawline and hand/wrist areas.,1
An employee was installing a roof on a metal building and cut his hand on one of the screws protruding through a metal sheet.  It caused a laceration that tore a ligament between the thumb and index finger in his left hand.,1
"During the start of shift operations, the injured employee was guiding rubber along the bottom of the machine when his thumb contacted the mill knife door located under the roller area. The thumb was fractured.",1
"An employee was moving a piece of 12-inch PVC pipe with a crane hoist. The hoist's slide rail broke, dropping the pipe. The pipe fell onto the employee's left hand, pinching his left ring and middle fingers against a steel rail. Both fingers were broken and severed; the middle fingertip was removed at the first knuckle.",0
An employee was operating a circular saw. The saw kicked back on the employee while trying to cut through a knot in a piece of 2 x 6. The employee's left ring finger was broken and the middle finger was cut.,1
An employee was operating a press brake and amputated two fingertips.,0
An employee fell three feet from a loading dock and struck his head on the steel floor. The employee sustained a head injury.,1
"While dumping a bag of chemical onto the screw conveyor, an employee caught their finger in the conveyor and amputated the right index fingertip at the base of the nail.",0
"An employee was working on an aircraft carrier in drydock. While climbing across from one tower of free standing staging to another, he fell, landing on the dock floor about 30 feet below. He was hospitalized, having suffered two compound fractures in his left arm that required surgery, bruised kidneys/spleen, and a broken left wrist.",1
An employee sustained an electric shock while pulling electrical cable through conduit on the roof and was hospitalized.,1
"An employee was pulling soil samples and running a geotechnical soil sample rig. The employee was lowering a section of the soil sampling rod into the previously advanced bore hole when their right hand was caught and crushed in the rod clamp. His right hand was fractured and sustained lacerations on both the dorsal and palmer side. His right index finger had a significant laceration which subsequently resulted in a portion of his finger, below the metacarpophalangeal joint (MCP), being surgically amputated the following day.",1
An employee was operating the slitter machine and got their right hand caught in the machine's rollers causing a laceration to the palm.,1
A warehouse employee was struck by a powered industrial truck (PIT) causing leg(s) fracture(s).,1
An employee was notching a 2x4 on a table saw and sustained a distal amputation of the left middle finger.,0
An employee was bitten on the hand by a maned wolf resulting in a deep puncture wound and laceration.,1
"An employee was on a portable ladder, hanging chairs on a display, when they fell about 6 feet to the ground below. The employee suffered six broken ribs and a broken pelvis.",1
"On June 30, 2018, while attempting to pick up a tote and move it to a table, an employee stepped on a wheeled cart and fell into a split position, suffering a complete detachment of muscle from the right sit bone.",1
"An employee was using a man-up forklift to look at the stuck forks of another forklift, about 15 feet off the ground. The employee's hand touched the stuck forklift's mast, and the slack of the chain dislodged. The chain amputated three of his fingers just below the knuckle.",0
"An employee fell off a truck, breaking his hand.",1
"An employee fell from the lowered standing platform of a powered industrial truck onto the concrete floor about 8 inches below, breaking his hip.",1
"At about 1:45 a.m. on June 30, 2018, an employee (who had been loading packages into a trailer in extreme heat) was found slumped over. The employee was taken to the hospital and diagnosed with heat stress illness.",1
"An employee turned to hand product to a customer when she tripped and fell on the floor, suffering a broken left hip. She was hospitalized.",1
"Two employees were tripping pipe on the rig floor. One employee slipped, and his right index fingertip was caught between the matting and the pin end of the pipe. He was hospitalized; the tip of his right index finger was amputated.",0
"On June 30, 2018, an employee was delivering mail when he started to cramp and feel dehydrated. He went home after completing his route, but was then hospitalized for heat stress and dehydration.",1
"Employee was cleaning an overhead conveyor while standing on a ladder. The conveyor activated, causing her glove to be pulled into the rollers and fracturing her left forearm. She was hospitalized.",1
"An employee was in a forklift basket, retrieving material from an upper shelf. Another forklift came around the corner and struck the basket, causing it to rotate. The employee suffered broken ribs and vertebrae.",1
A U.S. Customs and Border Patrol employee was conducting area orientation activities in his station's area of responsibility when a rattlesnake bit his lower right leg.,1
"An employee was helping load pallets onto an aircraft. He tripped and a pallet of freight ran over his right ankle, breaking it.",1
"At 6:45 a.m. on June 30, 2018, two employees were rebuilding a truck's transmission. They started the truck after replacing the bearings. The back shaft caught one employee's hair, pulling his scalp away from his head and partially amputating one of his ears. He was hospitalized.",1
"An employee was unloading a delivery truck. While attempting to unjam the dock door, he fell from a stack of pallets, landing about 10 feet below and suffering a broken leg.",1
"An employee was hospitalized after suffering a heart attack while installing a concrete pad on June 30, 2018.",1
"At about 11:20 a.m. on June 30, 2018, an employee was operating a paving machine when a 7,200-volt uninsulated power line arced to a tandem truck, which then arced to the paving machine. The employee was shocked while touching the operator toggle. He was hospitalized, having suffered electrical burns to his left hand and an exit burn on his right foot.",1
"An I-beam support fell from the top of a scale, striking an employee and fracturing bones in the employee's left leg.",1
An employee was bitten by a snake while refueling a propane-powered forklift outdoors.,1
An employee was in a company vehicle on the side of the road when another vehicle struck the employee's vehicle. The employee sustained a bruised spine.,1
"An employee was pressure washing the sidewalk, tripped over the hose, and fell. The employee was hospitalized.",1
"An employee was bagging potatoes. As the employee adjusted packaging, part of the machine engaged and amputated the tip of the employee's finger.",0
"An employee was cleaning around an industrial screen machine during production operations when the employee attempted to remove a piece of debris from inside the glue trough. The trough then engaged and came down on the employee's hand, causing the skin to be pulled back. The machine was running at the time of the incident.",1
An employee was working with a team to seal gaps in a furnace. The employee was overcome by the heat and was hospitalized.,1
An employee was cleaning condensation off a roller on a coating machine when a nip point (between that roller and another) caught the employee's fingers. The employee suffered an amputation of the right index fingertip and crushing injuries to the middle and ring fingers. The employee was hospitalized.,1
"An employee was walking down a wet metal ramp while loading a car onto a car carrier when the employee slipped and fell, hitting the concrete and breaking the left leg.",1
"At 9:00 p.m., an employee was working in the skinning line on a killing floor when a knife he was using cut his left ankle.",1
An employee was reapplying thread seal tape on the surface of a conveyor belt's metal transfer plate when the employee's right middle finger and right index finger became pinched between the conveyor belt and the metal transfer plate. The employee suffered a fracture/partial amputation to the right index finger (distal to joint) and right middle finger (distal to joint).,0
"An employee was performing maintenance on the multi-port valve in a process line. While he was rebuilding the valve (the valve was out of the valve body), the solenoid was activated. The airline blew off the valve and the valve closed on his left pinky finger, amputating it.",0
An employee was struck in the chest by a cow.,1
An employee was emptying a hopper into a dumpster using a forklift. The hopper rolled backwards after being emptied and crushed the employee's fingers resulting in amputation of three fingers.,0
"An employee was tightening lugs on a pipe coupling when the line became pressurized, causing the coupling to blow off the pipe and strike the employee's leg, fracturing it.",1
"An employee was part of a team of four that was moving a large catalyst cartridge using a permanent hoist. The employee was aligning flanges on the bottom of the equipment as it was lowered into place using the hoist. The cartridge was lowered onto the support ring in the cartridge housing while the employee was gripping the support ring with both hands. The employee's fingers were crushed between the cartridge and its housing, causing fracture/amputation injuries to eight fingers.",1
"An employee tripped on a mat and fell to the floor, requiring hospitalization for a fractured hip.",1
"An employee was on a scaffold stripping paint from the exterior of a commercial building when he lost his balance and fell backwards to the ground, suffering several broken ribs on his right side, a bruised lung, and a concussion.",1
"An employee working outside applying grout began showing signs of physical distress including sharp pain in the right back, shoulder and arm areas. The employee was hospitalized for a heart attack.",1
"While stepping out of an electric car, an employee's right foot was caught between the accelerator pedal and the side of the car's frame, causing him to fall and twist/fracture his right ankle.",1
"An employee was cleaning a sewer line with a hydro-jet. While he was pulling the hose, it came too far out of the manhole and the nozzle struck the employee's face, lacerating it.",1
An employee was connecting gauges to check the freon in an HVAC unit when he was shocked by 208 volts at 30 amps and received a burn on his left arm.,1
An employee fell and fractured his ankle while descending an unstable ladder that moved during a roof inspection.,1
"An employee was gathering boxes with a pharmacist in the warehouse. She stepped backwards, tripped, and fell over the corner of a pallet fracturing her left wrist.",1
"An employee was sitting on an 8-foot scaffold, preparing to descend to the ground below, when a plank shifted. He fell to the ground, suffering a fracture and dislocation of the left wrist, a broken nose, and contusions. He was hospitalized.",1
An employee was installing exterior drywall while working in a boom lift. The employee suffered six fractured ribs when caught between the boom lift basket and a structural I-beam. The employee was hospitalized.,1
An AT&T employee was at work and started having symptoms of heat exhaustion. The employee was hospitalized.,1
"An employee was operating a walkie pallet jack to pick up a load when she turned the pallet jack sharply. The pallet jack then increased speed and threw her into a support beam. She was pinned between the pallet jack and the beam, and as she attempted to get un-stuck, she accidentally hit the accelerator, causing the pallet jack to strike her again. She suffered a laceration to the right leg, pelvic fracture, and fracture to the L5 vertebra.",1
"An employee was attempting to remove a bird that was in a neck skinner machine's 6-inch-diameter drain. He had inserted his arm about 14 inches when his hand contacted the machine's enclosed rollers, resulting in the partial amputation of his left ring and pinky fingers.",0
"An employee experienced leg cramps and dehydration while delivering mail, requiring hospitalization for heat-related illness.",1
"An employee was carrying buckets of hot tar to perform roofing activities when he tripped and lost his balance. The hot tar contacted his body, causing third degree burns to both of his hands.",1
An employee was removing supports under an auger when the auger fell and struck the employee's head. The employee suffered bleeding and swelling of the brain.,1
"An employee was on a ladder when he was shocked by a live electrical component. He fell from the ladder, suffering an electrical burn and an open wound on the right thumb.",1
An employee fell on top of another employee as he was setting a form wall. The employee on the ground suffered a broken hip and shattered ankle.,1
An employee was clearing buildup on a table saw when the saw blade amputated part of his finger. A push stick was not in use at the time.,0
"An employee was struck by a customer's car while walking across the parking lot, suffering lower back, stomach, and head pain that required hospitalization.",1
"An employee was opening a gate and trying to put his vehicle in park when the vehicle started to roll. He tried to stop it and his left foot was caught under the tire. The vehicle then rolled over his left leg and pelvis, crushing and bruising them.",1
"On July 2, 2018, at 10:00 a.m., an employee was running the beginnings of a new job on a forging hammer when his right hand went between the top and bottom die as the foot pedal was pressed, amputating four fingers.",0
An employee was installing a wood pole while performing electrical work when he experienced cramping. He was hospitalized for heat exhaustion.,1
"An employee was clearing gypsum from a pump trailer machine's hopper while standing on the machine's auger. The machine started unexpectedly and twisted his right foot into the opening below the auger. His first toe was badly damaged, the second was partially cut off, and the third was lacerated. The machine was off but had been switched to an automatic setting at the time of the incident.",1
"An employee was working with a veteran in her cubicle when a patient's motorized scooter struck and injured her right knee. She sought medical attention at the facility where she was working, and was later admitted to a hospital.",1
"An employee was getting out of a 15-passenger van to go inside the office and retrieve keys to move a car to another location. He went out the back door of the van and exited backwards, mis-stepped, lost his balance, and fell backwards through the plate glass front of the building. He suffered deep wounds to his right leg and left arm (with arterial damage) and many smaller cuts on his arms, requiring hospitalization and surgery.",1
"An employee was on the fifth step of an 8-foot ladder when he turned/twisted to his left to grab a pipe to make a connection. The ladder also turned/twisted, and the employee fell, striking and lacerating his head on the floor.",1
"An employee was webbing paper into a press when the press's blanket cylinders caught the employee's left hand. The employee suffered damage to the middle and ring fingers, resulting in surgical amputation of the middle finger to the first joint.",0
"An employee was standing in the inbound operation area checking products coming in when a forklift hit the employee's left foot. The employee's leg was amputated below the knee, requiring hospitalization and surgery.",1
"An employee was installing screws and clips in insulation before placing roofing sheets when the employee slipped and fell approximately 45 feet to a lower level, requiring hospitalization for multiple broken bones.",1
An employee was brushing off excess meat from a grinder when the spiral knife blade amputated her right pointer finger above the first knuckle. The grinder was in operation at the time of the incident.,0
"While closing the gate to a lawn and garden area, an employee suffered a pinched finger, causing an amputation to the tip of the finger.",0
An employee was dusting within an office when she experienced chest pains and shortness of breath possibly due to heat. The employee was hospitalized.,1
"An employee was on a 28-foot extension ladder, trying to reach a clogged gutter drain with an auger and gardening spade. While he had one foot on the gutter and one on the ladder, the ladder shifted and he fell to the ground. He suffered three fractured vertebrae, two compressed vertebrae, bruises to his arms, and a bruise to the back of his head.",1
"An employee was removing an RTD sensor with a wrench when a release of hot, caustic water caused second-degree burns to the employee's chest, left arm, and hand. The employee was hospitalized.",1
An employee had just used a baler to create a bale of cardboard when another employee approached with an electric pallet jack. The operator of the pallet jack then pinned the employee between the baler door and the finished bale of cardboard. The employee suffered a cracked pelvic bone.,1
"An employee was operating a pallet jack when his right leg was caught between the pallet jack and a guardrail, suffering a compound fracture.",1
A construction worker assisting with street construction in a new residential community began experiencing symptoms of heat related illness and was hospitalized for heat stroke.,1
"An employee received an electric shock from 480-volt electrical current while trying to place an overhead hoist back on its track. The employee was hospitalized with burns to the left index finger, left thumb, left wrist, and chest.",1
"After spending about 20 minutes in an attic, inspecting for wood-damaging organisms, an employee was found unconscious by an open door. The day was hot, and the employee had suffered a heat-related injury.",1
"An employee was pulling a car into a bucket wash bay to wash and vacuum it for rental. The car began to roll backward, and the employee's hand was caught in the door. He suffered an amputation of the middle and index fingers of his left hand.",0
"An employee went over to where two other employees were working on a pump to see if the belt was aligned. The motor turns on and off via a float. When the motor turned off, the employee attempted to check the drive belt’s tension. The motor then kicked on, and his hand was caught between the belt and the pulley, amputating two fingers.",1
The employee was walking a regular postal delivery route and started feeling cramps. The employee suffered possible heat stress/stroke.,1
"A 5-gallon waste can overpressurized while an employee was pouring a waste liquid into it. The can exploded, injuring the employee's hand, abdomen, and chin.",1
"An employee tripped and fell over a cart, rupturing the left quadricep and requiring hospitalization.",1
"While inspecting a piece of glass, an employee suffered an arm laceration from the glass that required stitches.",1
An employee was cleaning out a greenhouse with a blower when the employee became dehydrated and suffered heat stress. The temperature was in the upper 90s at the time.,1
An employee was coming down a 6-foot step ladder when he slipped on a rung and fell backwards approximately 3 feet to the concrete floor. He landed on his lower back and fractured his tailbone.,1
An employee was operating an excavator. The excavator was running hot and the employee was burned while removing the radiator cap.,1
An employee dropped a piece of equipment onto their left foot breaking bones. The employee was hospitalized.,1
An employee suffered from heat exhaustion while on his delivery route.,1
An employee was operating a mold press and amputated their thumb above the first knuckle.,0
An employee was operating a forklift when a tire outside the forklift caught their left leg. The employee's leg was broken.,1
"An employee was descending exterior building stairs when she slipped and fell, striking her right knee on the stairs and ground. She was hospitalized.",1
"An employee was working at a cash register when they tripped over a power strip. The employee fell, suffering fractures to the right shoulder, right knee, and a rib on the left side.",1
"On July 3, 2018, a welder began to feel sick and went home. He was hospitalized the following morning to treat a heat-related illness that affected kidney function.",1
"An employee was repairing a sensor on a robotic trimmer's automatic curtain door when the door cycled, amputating the employee's index finger.",0
"An employee was measuring a pipe from the ground to a panel box when an electrical arc flash caused burns to the employee's left hand, neck, ear, and possibly face.",1
"An employee was helping a punch press operator punch holes in a sheet of aluminum that was approximately 72"" x 80"". The employee and the punch press operator attempted to flip the sheet in order to punch the other side when the sheet slipped. The employee attempted to catch the sheet and received a laceration to his left wrist, requiring hospitalization and surgery.",1
"An employee hand-fed parts into the mechanical power press. His arm was resting on the bolster plate when his right hand and fingers went underneath the light curtain at the front of the press. While either loading or unloading a part from the die, the press activated and the die then closed on his right index fingertip, resulting in a fingertip amputation down to the distal interphalangeal joint.",0
A roofing employee was working at a jobsite and suffered from heat related illness. He was hospitalized.,1
"An employee's hand was caught in a machine's chain and sprocket, amputating two fingers. The machine was guarded at the time.",1
An employee was repairing a truck clutch when the clutch flywheel crushed the employee's left pinky and ring fingers.,1
A forklift ran over an employee's left foot as it backed up.,1
"An employee fell to the concrete ground while coming down an extension ladder, suffering hip, pelvic, rib, and wrist fractures.",1
"While stripping a container, an employee signaled to boom down and the forklift extension became caught on bracing material. When he went to retrieve the strap, the forklift extension slipped off the bracing material, having a spring effect that crushed his left hand.",1
"While an employee was collapsing a folding table, the metal hinge trapped his right little finger, causing an amputation.",1
An employee was walking down the stairway and tripped. The employee sustained a fractured ankle.,1
An employee's right little finger was partially amputated while the employee was unjamming a radish de-tailer in a packing house.,0
An employee was attaching an extension chute onto his fold down chute on a concrete truck when his hand entered an area where the metal chutes came together. The chutes then pinched off his right index fingertip.,1
"An employee was welding a 25-foot steel A-frame. As the employee lifted the A-frame, a chain about 10 feet high came loose and the A-frame pinned them, causing a possible fracture to the left femur.",1
"An employee was using a ladder to access a mezzanine storage space. The employee fell from the ladder to the floor, suffering multiple fractures. The employee was hospitalized.",1
"An employee was operating a skid loader to dump gravel into a pit. The skid loader was overloaded and tipped into the pit. The cab broke loose and pinned the employee's legs, causing multiple injuries.",1
"An employee was working from a ladder to tie electrical into a junction box on a new construction commercial building. When the employee opened the junction box, a wire fell and contacted his hand, causing a shock. He then fell off the ladder and contacted the ground, fracturing his skull and ribs.",1
An employee was cleaning ceiling tiles from an A-frame ladder when he fell to the ground.,1
"An employee was driving a delivery van when a tire blew. The employee lost control of the van, which struck a utility pole. Later that day, it was discovered that the employee was suffering from a brain hemorrhage that required surgery and hospitalization.",1
"An employee was manipulating a steel plate into a roller machine. During the rigging of the plate, the overhead crane hoist/crane hooks disengaged. The plate fell, crushing the employee's pelvis. The employee was hospitalized and underwent surgery.",1
A surgical resident was preparing to begin a surgery when he fainted and hit his head on the operating table and then the floor. The employee sustained a fractured left temporal bone.,1
"An employee was standing between a sheet stacker and a conveyor. The employee hit the switch for the stacker to drop a sheet, which caused the suction head to retract. This resulted in the employee becoming pinned between the suction head and the conveyor chassis. The employee suffered fractured ribs and was hospitalized.",1
"An employee was attempting to clear a piece of wood that was jammed on a conveyor belt when his left hand was pulled into the moving belt, resulting in a partial ring finger amputation.",0
"On July 2, 2018, an employee was disposing of chemicals. A floor cleaning chemical spilled onto his right foot, causing a third degree burn requiring hospitalization.",1
An employee suffered severe dehydration while delivering mail in the heat.,1
"An employee was on the side of a refuse truck, picking up residential garbage. A tire blew and he fell off, hitting his head on the pavement.",1
"An employee was walking to the kitchen area when she slipped and fell, striking and bruising her head on a vending machine and then falling on her left arm and breaking it in multiple places.",1
"An employee slipped and landed on the right ankle while cleaning the tops of vertical trampolines, requiring hospitalization.",1
"An employee had been working for 5 hours and was packing plastic bags into a case of finished product. The employee began cramping and feeling nauseated, possibly due to heat-related dehydration.",1
An employee's forklift struck the side of another forklift. The employee suffered a broken leg.,1
An employee was driving his motorcycle to lock up the propane tank area after clocking out for the day. He had an accident with the bike and suffered an severe laceration on the right leg.,1
"Two employees were removing a valve from a 4-inch hydrogen line in a sulfur unit. One employee was loosening the bottom bolts of the flange. As the flange was opened, hydrogen escaped and caused a flash fire that burned the two employees. The employees suffered second degree burns on the ears, right wrist, right arm, back of the neck, and the back. One employee was hospitalized.",1
"An employee was lifting a 30-pound case of frozen dough when the employee became sore due to a previous hernia, requiring hospitalization.",1
"An employee was working in the flooring area of a machine while an employee working above was attempting to disconnect a 2-inch hose for sanitation purposes. The hose slipped from the employee's hand, striking the employee in the flooring area in the head and causing a contusion.",1
"As an employee stood up from her desk to let 911 responders into the building, a telephone cord caught her foot. She tripped and fell, fracturing her hip and pelvis.",1
"An employee was driving a utility vehicle on a pathway toward a bridge when the front right side wheel struck a fenced area, causing the steering wheel to strike and fracture the employee's hand and arm.",1
"An employee was setting up a machine when her left index finger went through two rollers, resulting in a fingertip amputation.",0
An employee was working with a patient in the emergency room when she experienced respiratory problems due to cleaning chemicals from the adjacent area. She was hospitalized.,1
"An employee's foot was run over by a forklift. Her foot broke in multiple places, requiring hospitalization and surgery.",1
"At 11:00 a.m. on July 4, 2018, an employee was working in a tree, about 30 feet above the ground when his safety harness failed and he fell resulting in a head injury. He was hospitalized.",1
An employee was hospitalized with blunt force trauma to the back of the head.,1
"An employee felt overheated and went to the office to cool down. While sitting, the employee fell over and hit their head.",1
"An employee was observing an oil leak on an injection molding machine. The employee climbed a ladder to get a better look. The employee's right hand then contacted the machine's platen, resulting in the amputation of the pinky, ring, and middle fingertips.",0
"An employee was lighting a furnace for operation when a malfunction caused the flames to shoot out of the furnace, burning the employee's face. The employee was hospitalized for facial burns.",1
"An employee was retrieving paperwork that was next to a printing machine. As she leaned down, her left hand contacted a roll of laminate. Her arm was wrapped around the roll and broken.",1
"An employee was tasked with cutting a bale that had a combination of plastic and cardboard. He was using a pair of shears to cut the wire banding when the bale collapsed onto his left leg, breaking his femur. He was hospitalized.",1
"An employee was standing with his hand on the end of a piece of 4x4 wood that was under a flatbed trailer. A forklift placed a load of steel on the trailer, and the weight of the load pushed down on the trailer bed. The employee's hand was crushed between the piece of wood and the trailer.",1
"On July 5, 2018, three employees were using a fork truck while rigging a machine. The bay doors were closed to keep the air-conditioned air in the shop. Exhaust from the fork truck built up in the work area; an employee suffered carbon monoxide poisoning and was hospitalized.",1
An employee received a possible electrical shock while trimming a palm tree.,1
An employee was using a saw when the blade struck and partially amputated his right thumb.,0
"An employee was stocking in the storage room when she tripped over a tote and fell, breaking her left hip.",1
An employee was installing a wood floor. While ripping a piece of wood on a table saw the employee's fingers contacted the saw blade causing amputation injuries to two fingers.,0
"An employee was lining up a rig auger and kelly when the equipment shifted and made contact with his right index finger, resulting in a partial amputation.",0
"An employee was loading an aircraft with a unit load device. The wheel of the container rolled over his foot, breaking it.",1
"An employee was inspecting roof trusses when he fell through an elevator shaft from the second floor to the first floor. He suffered a head laceration, a dislocated shoulder, and a broken elbow.",1
"An employee was installing sheet metal on a curtain rail using a forklift when the employee fell 15 feet, suffering trauma.",1
"An employee tripped and fell to the floor in a break room, suffering a fractured right hip.",1
An employee was loading a machine when he touched a part on the machine and received an electrical shock on his right hand from a 220-volt circuit. He was hospitalized.,1
"An employee was trying to adjust a conveyor belt when the sprocket caught her glove. Her left arm was pulled into the machine, and she suffered a compound fracture.",1
"An employee was sitting as a passenger in a utility vehicle, which was traveling on a boardwalk at an amusement park. He was coiling rope in his hands; the rope became entangled under the vehicle's tire and removed the tip of his left index finger.",0
"An employee used two 3,500-pound nylon slings to lift a heavy slide blade (about 1,000 pounds) on a forklift when the blade slid onto his right foot, fracturing all of his toes. He was hospitalized.",1
"On July 5, 2018, an employee was guiding a gear into a gearbox. The employee's right middle finger was caught between the gear and the gearbox, resulting in the amputation of the fingertip.",0
"An employee was troubleshooting a fan for an oxidizer when his finger was caught between the fan belt and the pulley wheel while manually pulling the belt, resulting in an amputation of the right middle fingertip.",0
"An employee was checking a rapper on a recovery boiler precipitator when the rapper rod (weighing approximately 10-15 lbs.) fell from inside the rapper coil assembly and struck the employee on the left middle finger. The employee received a cut/laceration, resulting in a partial amputation of the left middle fingertip with no bone loss.",0
An employee in the shipping department slid across a conveyor and his glove was caught in the sprocket amputating his left index fingertip.,0
"An employee was changing a cylinder on the steering column of a motor grader while standing on the raised blade. He hit the lever rod that controls the blade with his hands or arm, causing the blade to rotate and pinch his left leg between the grader and the step. His left leg broke.",1
"An employee was testing a 240V to 480V transformer when he received an electrical shock, causing him to fall to the ground. His back and head struck a concrete step, and he suffered cuts, bruises, electrical burns to his fingertips, and a possible concussion.",1
"An employee was using one hand to operate a hoist that held a wire-containing bobbin and one hand to guide the bobbin into the slot of a strander machine when the hoist started to lower faster than anticipated. The employee's left index fingertip was then pinched between the bobbin and strander machine, resulting in a fingertip amputation.",0
"An employee was helping a skid steer operator. The skid steer struck the employee, who suffered a broken right leg. The employee was hospitalized.",1
An employee was trying to re-start a production line. He was troubleshooting and climbing up and down a ladder to reach the internal bake oven. The employee became overheated and suffered a heat stroke.,1
An employee was trying to move 8 sheets of sheetrock when a sheet fell on the employee. The employee suffered a broken leg/kneecap.,1
An employee was operating a machine and fainted possibly due to heat resulting in a concussion.,1
"An employee was removing a transmission line from a bucket truck. The line sagged, contacting a live wire below, and the employee suffered an electrical shock and burn.",1
An employee was offloading a truck when he turned and tripped over a box on the floor. He fell and fractured his hip and shoulder.,1
"An employee was on a scissor lift, installing a disconnect to an energized engine bus stop. The disconnect made contact with two phases, causing a short and an arc flash. The employee suffered burns to the skin on the neck, stomach, and left arm and hand.",1
"An employee was in a warehouse, operating a powered industrial truck, when his left leg was caught between the truck and a support beam. The leg was amputated from the calf down.",1
"An employee was running conduit below conveyor belts when he went onto a platform and fell approximately 10 feet, breaking his left wrist, five to six right-side ribs, and his right-side pelvis. He was hospitalized. The platform did not have guardrails at the time of the incident.",1
"An employee was checking the entry gauge function on a machine. The machine's lid closed, coming down on the employee's right hand. His right little fingertip was severely injured and had to be surgically removed.",0
A smokejumper was injured while landing during a parachute jump.,1
"An employee fell off a dirt bike while taking it to the track, suffering three broken ribs, a punctured lung, internal bleeding, and a broken scapula.",1
"A Lone Star Wolf Service employee was testing tubing going into a well when he began helping an operator who was lowering testing bars and pressuring them up for testing. After a couple of repetition runs of inserting the testing gun into the testing bar eye and hydrotesting the tube, the operator lowered the bars a bit more to have a complete seal. At the time, the injured employee's  hand was on the testing gun handles, and his right index finger was pinched between the wiper cup and the testing pan. He was hospitalized.",1
"An employee was struck by lightning while walking to his vehicle, requiring hospitalization.",1
An employee's right arm was crushed by a tree stub that fell back on the stump as the employee was pushing it. The employee's right arm was amputated.,1
An employee's right index fingertip was caught and amputated in a hose reel assembly on a new construction truck.,0
"A forklift driver was scraping some foreign material from the slide plate of his forklift when the fork was moved back into the neutral position, causing the driver's right middle finger to be caught between the mast and the slide plate. This resulted in the amputation of his right middle finger from the nail up.",0
"An employee opened a door, and his right hand jammed on it. The index fingertip was amputated.",1
"An employee was climbing the fixed ladder of an open top dumpster when he fell backwards and struck his head on the concrete ground, suffering a concussion and broken tailbone.",1
"An employee was helping move a trauma patient to a gurney. The patient began to wake up and kicked the employee, who suffered a spleen laceration and was hospitalized.",1
"An employee was cleaning beneath a moving conveyor when the tip of his left glove was caught in a chain and sprocket. His middle, ring, and little fingertips were pulled into the chain and sprocket and amputated.",0
"An employee was painting a 35-foot trailer from beneath. The trailer had been lifted on two forklifts, one at the front and one at the back. The tilt cylinder on one of the forklifts had a slow leak and tilted forward, causing the trailer to slide off the forks. The trailer struck the employee across the shoulder and upper back, knocking him to the ground. He suffered fractured vertebrae and three broken ribs.",1
An employee was using an electric pallet jack to haul freight at the end of an aisle when his left foot slid off the jack as it was turning and was crushed/fractured between the jack and a corner beam.,1
An employee was working on a boat fuel tank in an outbuilding when the fuel tank ignited and the building caught fire. The employee escaped the building but suffered second degree burns.,1
"An employee used a 6-foot step ladder to pull a box of sanitizers from a shelf that was approximately 8 feet above the floor. He worked from the 3rd step of the step ladder to place a box on the shelf. He fell from the ladder, hitting his head on equipment and the floor. He suffered contusions, cuts, and lacerations to his forehead and other areas of his head, requiring hospitalization.",1
"An employee was in a scissor lift installing metal trusses on a building when he fell approximately 15 feet from the lift, breaking multiple bones.",1
An employee was out on a job and felt sick. He passed out on the ride home. The employee was hospitalized due to heat exhaustion/heat stroke.,1
"An employee was moving a packaging uncoiler to the cutter/sealer when her hand entered the cutter/sealer, resulting in a fingertip amputation.",0
"On July 6, 2018, a temporary employee was scanning skids for order picking. A stand-up picker turned, and its load of double-stacked product pallets fell off its forks. A pallet fell onto the employee's lower left leg and fractured a bone.",1
An employee shut down a mixer and was reaching inside when the mixer amputated his left ring finger. The mixer had not come to a complete stop at the time of the incident.,1
An employee fell from an extension ladder while climbing it. The employee suffered a broken ankle.,1
An employee drove a forklift over a dock board into a trailer and felt back pain.,1
"Two employees were lifting a valve into place. It slipped and one employee's finger was pinched, leading to a partial amputation of the left ring finger.",1
"An employee was cleaning a probe on a hot condensate line. The employee was sprayed with hot steam and liquid, suffering second- and third-degree burns to 30 percent of the body.",1
"An employee was accessing the second floor with a ladder when he lost his grip and fell off the ladder more than 10 ft., landing on his feet and suffering a compound fracture to his ankle.",1
"While plugging a computer into a wall outlet, an employee was shocked. She suffered lasting tremors and right-side weakness.",1
"On 7/6/2018, an employee was operating a vertical mixer and was using a rag to press against the rotating shaft. The rotating shaft then caught the rag and pulled the employee's right hand into the mixer, resulting in a pinky finger amputation as well as a fracture and abrasions to the right wrist. The mixer was guarded at the time.",0
An employee operating a stand-up motorized pallet jack order selector was passing another operator when his right leg became caught between a pallet in the aisleway and the order selector. He fractured his right leg and was hospitalized.,1
"An employee was helping to direct a traveling block off the ground. As the block was being raised, his left foot was caught between it and a well head, and was lacerated and broken.",1
An employee was on a ladder placing items in the rafter of a ceiling when the ladder slipped out and he fell to the floor.,1
"On July 6, 2018, an employee was stepping off of a sprayer that was being refueled when the employee stumbled and rolled an ankle. The employee's ankle fractured and required hospitalization.",1
"An employee was working from a Baker scaffold, cutting a steel ceiling joist. Part of the joist fell, striking the scaffold; the employee lost his balance and fell 4 feet to the floor, breaking his right ankle.",1
"On July 6, 2018, an employee was pushing a piece of lumber on a rail end shaper. The shaper partially amputated his left index finger, just below the nail.",0
"An employee's foot slipped off of the second step of a loader as he began to climb into the cab. He fell to the ground and fractured his left hip, requiring hospitalization.",1
A temporary employee was trying to remove a piece of rebar that was stuck in a machine when the employee's right pinky and ring fingers were smashed between the rebar and the machine.,1
"A driver was loading a logging truck when a post on the truck broke. A log was dislodged and rolled off the truck, striking the driver. The driver suffered a broken ankle.",1
"An employee was running telephone wire in a residential attic when he blacked out for a moment and became unwell due to heat stress, requiring hospitalization.",1
"While clearing materials from a banding machine, an employee suffered an amputation injury to the right index finger. The machine did not have a guard at the time.",1
An employee was lifting a quartz slab using a clamp attached to an overhead crane when the slab came off the clamp and fractured the employee's right hand.,1
"An employee fell through drywall in an attic, landing on a lower level 11 feet below. He suffered a fractured tailbone.",1
"An employee was buffing a shaft while operating a lathe when a piece of the employee's clothing was caught by the lathe, resulting in a broken right forearm.",1
A home health care worker was at a restaurant with a patient when she slipped on a wet floor. She suffered a broken pelvis.,1
"An employee was walking through the warehouse when he was struck by a forklift (clamp truck), knocking him to the floor, breaking his foot, and crushing his heel.",1
"On July 6, 2018, an employee was installing pipe in an excavation four feet deep. The walls collapsed and the employee was struck by falling rock and dirt, suffering a compression of the L2 vertebra.",1
"An employee tripped over a water hose and fell to the floor, breaking her knee.",1
"An employee was attempting to clean a spray painting gun when it struck his left middle finger, resulting in a fingertip amputation.",1
"An employee slipped and fell onto a hard tile floor, suffering a severe right forearm contusion and possible broken bones. She was hospitalized.",1
"An employee fell off a 2-foot step ladder and hit boxes while stocking a shelf, suffering cracked ribs and a punctured lung.",1
"While stripping and waxing the floor in a hospital, an employee slipped and fell on the wet floor, breaking ribs on the right side.",1
An employee was on a ladder unhooking the ground clamp of a welding machine with the right hand when the employee grabbed a piece of conduit with the left hand for support and received an electric shock. The employee suffered a burn to the right hand around the thumb and ring finger.,1
"While walking toward a cooler, an employee tripped over a filter pan that contained filtered debris from hot oil and received third degree burns.",1
"An employee was sandblasting walls. As the employee reached to sand blast a spot, the ladder became unbalanced. The employee fell and the blast stream contacted his left hand and wrist causing abrasions requiring a skin graft and nerve damage.",1
An employee was operating an ice batch machine and amputated a left fingertip.,0
"An employee was cleaning debris from and around a conveyor with an air hose when his arm was caught in the conveyor's pulley, causing him to be pulled into the running belt. He suffered a broken left clavicle, a broken rib on the left side, and abrasions to the torso. The conveyor's guards were removed at the time of the incident to identify why material was getting stuck in the conveyor.",1
"Two employees were lifting a hog panel when one of the employees tripped and fell with the panel, amputating his right middle fingertip.",0
"An employee was operating a blender. Noticing that a booster pump was running, he began walking toward it to turn it off. The booster pump deadheaded, causing pressure and steam to build up in the line, and as the employee approached an 8-inch suction hose broke loose from the pump and struck him in the lower left leg. He suffered a compound fracture to the left leg and second-degree steam burns to the torso.",1
"An employee was carrying a glass in a server area. She turned and her knee dislocated. In falling, she suffered hand lacerations from the drinking glass.",1
"An employee was dismounting a ladder when the ring on her ring finger was caught on metal material holding up a conveyor system, resulting in an amputation to her ring finger.",0
"An employee was operating a riding pallet jack when he was caught between a pallet and a rack, fracturing his left leg.",1
An employee was hit in the head with a motor that fell when its support bolt was removed. The employee sustained a head laceration.,1
"At about 8:00 a.m. on July 7, 2018, an employee was walking in a Price Chopper bottle return area when he fell for an unknown reason, striking his face. He suffered facial injuries and several of his teeth were knocked out. He was hospitalized.",1
An employee was assaulted by a patient and was hospitalized.,1
"While replacing a valve on a furnace (which was not on), an employee became overheated.",1
"On July 7, 2018, employee was engaged in sand blasting operations when he began having issues with his pot. As he inspected the connections, the sand blasting nozzle activated and the blast media hit his face. He was hospitalized with foreign bodies embedded in the eyes and face.",1
"An employee was checking the chlorine levels in a therapy pool. A cover was removed so that chlorine tablets could be added; chlorine gas was released and the employee breathed it in. Suffering respiratory distress, the employee was hospitalized about 7 hours later.",1
"An employee was setting up a hydraulic press with a new die. The employee inserted hold-down pins and a large metal bar. As the die came down during the initial work, it hit the edge of one of the hold-down pins, which vibrated past the end of the jig and entered the path of the ram. The ram hit the edge of the pin and flung it out violently. The 1-pound metal pin hit the employee's head, causing facial lacerations and a skull fracture.",1
"On July 8, 2018, an employee fueled a pressure washer and the fuel ignited. The employee suffered severe burns to both legs and a broken left ankle. The washer was running at the time of the incident.",1
"An employee was retrieving shopping carts from a parking lot. A car backed into the employee, who suffered a broken wrist. The employee was hospitalized.",1
"An employee lost her balance while walking in a store and fell to the floor. She suffered a dislocated hip, requiring surgery.",1
"An employee fell from a truck bed while loading pallets, landing on the floor and fracturing his hip.",1
"An employee was organizing a Conex box when his right ring finger was caught between a hose and metal shelf in the box, resulting in a fingertip amputation.",0
"An employee was using an overhead crane to install a new wheel hub into a tugger drive. She was guiding the unit and when she lowered it, her finger was pinched between the unit and the wheel, severing her middle fingertip and resulting in an amputation.",0
"An employee was rolling a kiln as part of scheduled maintenance when the kiln stopped rolling. As the employee checked on the kiln, the employee's left middle finger got too close to a belt or blade, resulting in a fingertip amputation.",0
"An employee was working with a gunite mixer when the auger failed due to an abnormal valve. The auger pulled his gloved hand into the mixer, resulting in the amputation of his ring and middle fingers.",1
An employee was cleaning a meat grinder when it amputated the tip of the employee's right middle finger. The grinder had not completely stopped at the time.,0
"An employee was using a shovel to hold down a boring machine bit to guide it into place at the start. When the machine was turned on, the drill bit slipped out and grabbed hold of employee's pant leg. His left leg was caught between the winch rope and the drill bit. He suffered a left leg abrasion and a sprained ankle.",1
An employee was shearing a piece of metal and amputated a fingertip. The machine was guarded at the time.,0
An employee traveling to Connecticut for business was involved in a motor vehicle accident while riding in a taxi. The employee experienced abdominal pain and was hospitalized.,1
A nurse experienced allergy symptoms (including possible anaphylaxis) after treating patients who might have received an antibiotic she was allergic to.,1
"An employee was walking down the sidewalk when she lost her balance and fell on her right side, suffering a possible broken hip.",1
"An employee was assisting with beveling the ends of a pipe when he was struck by a 24"" diameter pipe. His right leg was caught between the pipe and a roller, which broke his ankle.",1
An employee was going out to get some trucks ready at the terminal when he fell over a curb stop and then fell into a shallow concrete berm. He suffered a broken right hip and two broken right ribs.,1
An employee was descending a set of stairs when his boot tread may have become stuck in the stair grating causing him to trip and fall to the ground. The employee sustained multiple fractures to his left leg.,1
"Two employees were driving all-terrain vehicles, using them to control cattle, when their vehicles collided. One employee suffered a fractured left femur.",1
"An employee was waiting for an excavator to move its boom into place and stop operating. The excavator stopped, and the employee walked toward the machine. The bucket began to move again and struck the employee, causing a spleen injury.",1
"An employee was in the process of sitting in an office chair with rollers when he stepped on one of the wheels, causing the chair to roll out from under him. He then fell on and injured his tailbone.",1
An employee was hospitalized for burns to his right foot when he rinsed himself with hot water.,1
"An employee was making tea when the basket that holds the tea fell into the water. The hot water then splashed on her hands, arms, and feet, causing burns.",1
"An employee was working on a drilling rig location, adjusting and pushing forklift blades, when the blades pinched the employee's middle finger, resulting in a fingertip amputation.",1
"An employee was walking down the hallway, lost her balance and fell breaking a femur.",1
"An employee was walking on a metal roof when he fell through a section that had been cut out. He landed 12-15 feet below, breaking his foot.",1
"An employee was using a manual wrapping machine to wrap pipe for an oil field when he tried to manually adjust the machine and his hand was pulled into it, breaking his right forearm.",1
An employee was putting chlorine tablets in a pool's chlorinator. A reaction caused the release of chlorine gas; the employee inhaled the gas and was injured.,1
"An employee was signaling for a load to be brought up. The employee's finger was caught between the load line and the sheave of the block, and the employee suffered an amputation of the little finger on the left hand.",1
An employee slipped and fell on a wet floor fracturing the left shoulder.,1
"An employee was attempting to repair a deboning machine when it lacerated the employee's left ring finger, requiring hospitalization and surgery. The machine was operating at the time of the incident.",1
"On 7/9/2018, an employee was assigned a troubleshooting service request regarding air conditioning in a villa. He was checking the HVAC equipment for the kitchen to determine why it had a temperature change. At around 9 p.m., he fell approximately 10 feet off a fixed ladder to the lower level. He was hospitalized with multiple injuries, including a concussion and soft tissue injuries.",1
"An employee was operating a concrete mixer. As he attempted to clear up clogged concrete mix, the mixer's blades struck his right hand. The middle finger was partially amputated, right above the knuckle.",0
An employee suffered a second degree burn from an electrical arc flash.,1
"On July 9, 2013, an employee was setting up equipment on a naval ship when the employee stepped onto a floor opening covered by a tarp and fell through it into an open hatch. The employee suffered a head injury/trauma.",1
An employee was pushed by another employee and a cement cigarette ashtray fell on his feet. His left toe was crushed.,1
"An employee was applying home coating around the exterior of a rooftop when the employee fell off the edge of the building, suffering a broken wrist and other trauma.",1
"An employee was cutting a piece of metal in a 12"" compound miter saw when the material became caught in the saw and pulled his arm into the extruded aluminum knife edge metal, causing a deep laceration to his left forearm.",1
"An employee was driving a side-boom operator across a temporary bridge. The bridge collapsed and the machine rolled slightly and came to rest at about a 45 degree angle. As the employee disconnected his seat belt, he fell from the machine and landed in the creek bed on his back. The fall caused hairline fractures to his scapula and a rib.",1
"An employee was sitting on the dock when a coworker started an RTV, which then moved forward and crushed her leg between the RTV and the dock. She was hospitalized with a leg fracture.",1
"An employee was operating a pump supplying water for a fracturing operation (oil/gas) when the pump's discharge hose disconnected, and the hose clamp securing the hose to the flange failed. The hose then struck the employee's right shoulder, upper right back, and pelvis. The employee suffered two fractures to the pelvis, contusions, and abrasions, requiring hospitalization.",1
An employee was walking near the fry station when she tripped over another employee's foot. She fell to the ground and fractured her left forearm.,1
A security guard was feeling faint and dizzy and was hospitalized.,1
An employee was cleaning breading out of an auger when their hand was caught in the machinery. The employee suffered a fracture injury to the left hand and arm. The machine's guard had been removed at the time of the incident.,1
An employee was drilling with a press and amputated a finger.,1
"The injured employee was on a two-step ladder cleaning the rotisserie area in a deli while a second employee was using a container to recover drained grease from the same equipment. The injured employee came down and repositioned the ladder next to the grease bucket and used it to clean. When he came down the ladder, he stepped into the grease bucket and burned his foot.",1
"On 07/09/2018, at 12:30 PM, an employee was sitting in a chair at a desk. When he stood up and stepped away from the chair, his foot was caught underneath the chair's wheel, causing him to lose balance and fall to the ground. He fractured his hip.",1
An employee was coupling a dolly to a tug. The dolly rolled and the employee attempted to quickly connect the dolly and the tug. The employee's left index finger was then partially amputated at the top.,1
"An employee slipped and fell while moving material, twisting and fracturing a leg.",1
"An employee was rolling a metal pipe to the end of a pipe rack so he could pick it up with a forklift when the pipe rolled over the pipe rack chock and landed on his left foot, breaking bones. He was hospitalized and required surgery.",1
"An employee was on the roof securing plastic when he went to step off the roof and onto a catwalk. The catwalk was not in place and he fell approximately 13 feet to the floor, suffering a dislocated and fractured left elbow as well as a broken left ankle.",1
"An employee was moving an interface box into a small space in the basement ceiling of a house. The employee came into contact with an exposed live wire in the space and was shocked. He suffered contusions and bruising on his right elbow, as well as dizziness.",1
"While operating a drill/saw machine, an employee attempted to see why the drill tooling kept falling out of the drill head. The machine's conveyor rollers then moved a channel iron back out of the machine, and the employee's left leg was struck by the channel iron, resulting in a laceration above the knee. The employee's left calf was also caught between the machine and the channel iron, suffering a muscle injury requiring surgery.",1
An employee was working in an area with an open-ended line when hot steam/water splashed on his back.,1
"On July 10, 2018, at approximately 3:15 p.m., an employee began experiencing muscle cramps after MIG welding on a tank car. He was hospitalized for dehydration and heat exhaustion.",1
"An employee was moving rolls of paper back onto a conveyor (roll may weigh up to 9,000 pounds) when his right little finger was caught between two rolls, resulting in an amputation of the first two sections.",1
An employee was transporting shingles onto a roof and became dehydrated. He suffered heat illness symptoms and was hospitalized.,1
"On July 10, 2018, an employee was hospitalized for dehydration after finishing his shift insulating tank cars.",1
An employee suffered heat stroke while working on a jobsite installing foundation drains.,1
An employee showed signs of heat stress while operating a paver during a heat wave. The employee was hospitalized.,1
"An employee was attending to a customer and walking backwards when she lost her balance and fell, breaking her right hip.",1
"An employee was working with another employee, torqueing the manways on a tower. He came down around 2:30 p.m. due to the weather and went back up around 3:30. Around 4:45 the two finished the job. They came down and walked back to the lunch tent to rest, at which point the employee began vomiting. He was hospitalized for heat-stress-related illness.",1
"An employee was guiding a leg assembly being lifted by a crane when the weld broke, allowing a bracket on the leg assembly to fall and scratch the employee's thigh.",1
"An employee was working at a carcass splitter when a carcass became caught on the splitter blade. As the employee attempted to clear the carcass, the line restarted and the blade amputated the employee's left index finger to the distal interphalangeal joint. The blade was unguarded at the time of the incident.",0
"While finding a gas line's tracer wire, an employee moved vegetation from around a gas meter and was bitten on the right ring finger by a snake. The employee was hospitalized.",1
"At 5:13 a.m. on July 10, 2018, an employee was working on a barrelmaking line when her glove was caught in a feed belt and pulley. She suffered a deep laceration to the right thumb, and was hospitalized for surgery.",1
"On July 10, 2018, an employee was unloading a tandem dump truck at a dump site. The locking mechanism on the truck's gate was stuck. As the employee tried to unjam it, their hands were caught between the gate and the truck bed. The employee's left-hand fingers were crushed, with a possible amputation to the left middle finger; the right-hand fingers suffered contusions.",1
"An employee was carrying a box with a part in it to a shelf when he stepped on a creeper, causing him to slip and fall. He fractured his right ankle.",1
"An employee was helping a process cook set up a process line. The employee's left foot entered a food contact tub, containing water heated to 180 degrees Fahrenheit. The employee suffered second-degree (and possible some third-degree) burns to the foot.",1
"An employee was using a forklift to load a sterilization chamber with pallets of medical devices. As he drove out of the chamber, ethylene oxide gas exploded. The employee suffered second and third degree burns over his body and was hospitalized.",1
"An employee was operating an ATV to move base plates on a roof when the throttle became stuck and he lost control, falling off the roof to the ground and breaking ribs.",1
"An employee was adjusting the chuck on a roll fed machine. He released the sidewall carriage chuck to decrease the tension and used his left hand to manually operate the lever while holding the core with this right hand. His right thumb was then caught between the roll core and the sidewall carriage chuck, resulting in a right thumb amputation.",0
"An employee tripped and fell, hitting her head on a kitchen stove. She was hospitalized for a possible head injury.",1
"An employee was removing a large hydraulic ram to gain access to a hydraulic leak when he unbolted the cradle and it fell out, pinning him against a steel bulkhead. He suffered an amputation to his right arm.",1
An employee tripped and fell while leaving his car in the workplace parking lot. He suffered a fractured right hip and was hospitalized.,1
An employee was attempting to dislodge a plugged drain on a fish meal auger when the auger amputated his right middle and ring fingertips.,0
"An employee finished loading a truck with trash and was securing a winch to the truck when the employee's finger was caught between the winch and truck, amputating a portion of the left ring finger.",0
An employee was using a cart to move a bundle of rebar when the cart flipped. The employee tried to catch the rebar to prevent it from tipping over and injured his left hand.,1
An employee was handling parts coming from a cast machine when he began experiencing cramps. He was hospitalized with heat exhaustion and dehydration.,1
An employee was handling the electrical power cord of a refrigerator truck when he was shocked. His hand became numb and required hospitalization.,1
"An employee received an electric shock while unplugging his computer, requiring hospitalization.",1
"An employee was performing maintenance on a machine when her left hand was caught between the chain and sprocket, resulting in a partial amputation of the tip of the ring finger.",0
"An employee was putting flour on cookies. The employee's right arm was caught inside the product belt. The employee suffered a fracture, requiring surgery.",1
"An employee of G&H Underground Construction, Inc., was cutting a concrete pipe with a gas-powered concrete saw when the saw kicked back, striking and lacerating the employee's throat.",1
An employee's head hit a metal beam as he stood up on top of a conveyor belt system. He suffered head contusions and spinal injuries.,1
"An employee suffered heat-related illness while prepping a site for utility pole installations, requiring hospitalization.",1
"An employee was removing bolts from a pipe flange when he lost his balance and fell, striking his right side against a valve handle and breaking a rib.",1
"An employee was working near a manhole when a car drove through the work zone and caught the line/cords to the employee’s water pump equipment, causing the equipment to strike the employee’s right arm.",1
"An employee was about to climb a 15-foot chain ladder to exit a horizontal vessel. When he stepped onto the ladder, it became unstable and he fell. He landed on his back on the vessel's floor, suffering multiple broken vertebrae.",1
"An employee was installing house wrap tape while working from a 300-pound-rated, 28- to 32-foot fiberglass extension ladder, which had filler lumber material elevating and supporting one side of the base ladder side rails to level the ladder base. During the house wrap taping operation, the ladder and employee fell an estimated 20 feet. The employee suffered wrist, elbow, arm, and rib fractures, as well as lacerations to the kidney and face.",1
"An employee was moving plastic milk crates when the crates fell and hit the employee's head, causing a mild traumatic brain injury.",1
An employee mounted a moving forklift while walking through a warehouse. The employee later dismounted and entered the path of the moving forklift. The employee's right leg was run over and fractured.,1
"An employee was aligning a grinding wheel when the employee's right middle finger was pinched between the wheel and flywheel, resulting in a fingertip amputation.",0
"An employee was bent down, stocking shelves, when a mobile cart struck her. She fell, breaking her left femur.",1
"An employee got into a physical altercation with an airline passenger at a terminal gate. The employee was punched in the face and fell to the ground, suffering a concussion.",1
"An employee became overheated while casting molten lead ingots, requiring hospitalization for severe heat exhaustion.",1
"An employee fell from a 15-foot extension ladder to the ground while pruning a tree, suffering a broken back.",1
"An employee was trying to deburr a small metal part using a multi-flute countersink when the employee came into contact with a 15-inch drill press, resulting in a left thumb amputation.",1
"An employee was changing a die in a hose crimping machine. The machine cycled while his right hand was in contact with it. The fingers on his right hand suffered severe damage: his index finger was pinned and stitched with permanent loss of the fingernail, his middle and ring fingers were amputated to the second joint, and his little finger was amputated to the first joint.",1
An employee was operating a pasta manufacturing extrusion press when his arm entered one of the bins where pasta flour was being mixed to push the pasta remnants into an extrusion bore. The press paddle lacerated his right bicep area. The press' safety gate was in place at the time of the incident.,1
"An employee was changing the die in a machine when the employee's left hand contacted the brake, resulting in amputation of the left index and pointer fingers.",1
"An employee experienced severe heat cramps after conducting electrical rewiring activities, requiring hospitalization for heat stress.",1
"An employee was operating a powered industrial vehicle (tug) when it took an abrupt turn. The employee lost balance and was thrown from the vehicle to the concrete surface, suffering a head laceration that required hospitalization.",1
"An employee fell from some boxes, striking against a U-boat cart and suffering fractured ribs and vertebrae.",1
"An employee was cutting meat with a vertical bandsaw when the blade contacted his right hand, causing an amputation and laceration to the tip of his middle finger.",0
An employee was about to remove debris within a repaired rotary valve when the valve amputated his left middle fingertip. The valve's lockout/tagout had been removed and it had been energized to ensure that it worked following the repair.,0
A temporary employee working in the kitchen area was hospitalized for severe dehydration.,1
An employee was stepping off a stand-up forklift while delivering materials to production when the employee's left foot was caught under the stand-up forklift and suffered a fracture.,1
An employee was cutting chicken with a knife in the kitchen and amputated his fingertip.,0
"The injured employee was working on a crew finishing a concrete curb. After finishing, the employee started cramping and was hospitalized for potential heat stroke.",1
"An employee was vacuuming the cab of his truck, missed all of the steps while exiting the truck and fell. The employee sustained a brain bleed.",1
An employee sustained an amputation to the right index fingertip while cleaning the chuck of a die press machine.,0
"An employee was changing the length of a sliding, adjustable table leg. The leg pinched and amputated the employee's right index fingertip.",0
"An employee was feeding slabs of bacon into a slicer. While he was clearing bacon scraps from under the machine, the cutting blades amputated the tip of his right middle finger.",0
An employee struck his back against a racking system column while operating a powered industrial truck (reach truck). He suffered contusions that required hospitalization.,1
"On July 11, 2018, an employee was in the locker room after working near an extremely hot smelting furnace when he became disoriented and experienced nausea and fatigue. He was hospitalized for heat exhaustion.",1
An employee was reversing a pallet jack to retrieve a garbage can which was underneath the rollers when his right leg was caught between the rollers and the pallet jack. He was admitted to the hospital with lacerations and broken leg.,1
"On July 10, 2018, an employee was operating a press shear when his left middle finger went under the hold-down, resulting in a fingertip amputation.",0
"A store employee was struck in the abdomen by a shoplifter, causing the rupture of a prior hernia repair. The employee was hospitalized.",1
"After working on equipment at a customer site, an employee left work feeling ill and was hospitalized for heat-related illness.",1
"On July 11, 2018, at approximately 5:00 PM, an employee was operating a riding pallet jack in the warehouse when the operating handle of the pallet jack went under a racking system. Her right middle finger was crushed between the handle and the rack, requiring hospitalization and surgery.",1
"An employee was stepping off a baggage cart when she slipped and fell, fracturing her right arm.",1
An employee was driving a pole truck. The truck contacted a power line resulting in burns to the employee's right arm and leg. The employee was hospitalized.,1
"An employee was working on the ground at an active job site when a reversing milling machine ran over the employee's left foot. The machine continued running up his leg to approximately his hip. His left foot and leg were crushed, with damage to the left hip and amputation of the left leg from the knee down. He also suffered a fractured right leg and hip.",1
"While walking across an auction lane, an employee was hit by a car. The employee suffered broken ribs and a broken hip.",1
"An employee was doing electrical work when he fell 6 feet from a ladder, injuring his back and head.",1
A trainee was undergoing a combat baton evaluation. The instructor bear-hugged her and they fell to the ground; the trainee suffered two fractured ribs and a partially collapsed lung.,1
"On July 11, 2018, a mail carrier felt ill after finishing his route at 6:25 p.m. He was hospitalized for heat exhaustion and dehydration.",1
"An employee was using a wrench to adjust a screw on a mold machine when her right hand was pinched between the wrench and the machine's plate, fracturing two fingers of her right hand. Her index finger had to be partially amputated.",0
"An employee was using a deli slicer when its blade cut the tip of his right thumb, causing a partial amputation.",0
"On July 11, 2018, an employee was working from a mobile scaffold, about 12 feet above a concrete floor, to remove asbestos. He fell to the floor, fracturing his wrist and hip. The scaffold's guardrails had been removed at the time of the incident.",1
"An employee was climbing a fixed ladder up to a water tower when a stranded metal safety cable located beside the ladder came loose at the top anchor point and struck his leg, puncturing his right thigh.",1
"An employee was preparing to lift a DC motor. While he positioned the nylon sling, the crane activated, pinching his right ring finger between the motor frame and the sling. The fingertip was amputated.",0
"An employee was moving furniture when he started cramping, vomiting, and feeling exhausted. He was hospitalized for heat-related illness.",1
"A temporary employee was sitting on a bag of cargo, waiting for operations to begin. A 2,000-pound cargo bag struck the employee.",1
"An employee was in a lift basket placing corrugated roof panels on a roof when the employee exited the lift basket to measure the next piece of decking and fell 15 feet to the ground. The employee suffered fractures and lacerations, as well as bruised heels on both feet.",1
"An employee was placing a metal screen on a sheet metal folding machine when his foot inadvertently pushed down on the machine's cycle foot pedal, causing the upper ram to close down on his hands. He suffered a compression injury and fractures to the left hand and bruises to the right hand.",1
An employee was operating a table saw and amputated a fingertip on the saw blade.,1
"A rack of sheet metal tipped, and an employee's face and nose were lacerated by the falling sheet metal.",1
An employee was helping to transfer a steel plate off a flatbed truck with an overhead crane. The rigging equipment was put under tension while the employee's left ring finger was between the shackle and the plate hook; the employee's fingertip was pinched and amputated.,0
"A crew was working to remove tubing from a well. A 2-inch hose was connected to the tubing for fluid circulation. The crew was raising the tube when the hose was caught and came under tension. An employee attempted to dislodge the hose, which reacted and sprung into the employee's face, breaking bones. The employee was hospitalized.",1
"An employee was using a manual pallet jack to push a transformer when he made a sharp turn and the transformer fell on his leg, fracturing his tibia and fibula.",1
Two employees were involved in an altercation and one employee was cut on the face with a knife.,1
"At about 10:30 a.m. on July 11, 2018, an employee was clearing wood dust from a horizontal belt near the chipper. He was using a piece of wood to knock the dust from the belt; the belt splice caught the piece of wood and pulled his finger into a belt roller. The tip of his right thumb was amputated.",0
A transmission pole was in a 42-inch diameter hole that was being backfilled. An employee slipped into the hole and suffered an ankle dislocation.,1
An employee sustained electrical burns to his back and both hands when he made contact with an energized primary line.,1
"On July 11, 2018, an employee began having symptoms of heat-related illness while installing rebar at a construction site. He was hospitalized.",1
An employee was crimping terminals on a mechanical power press when the press amputated the employee's left index finger.,0
An employee was valet parking cars and struck a light pole.,1
"On July 11, 2018, an employee was mounting a 16-inch tire onto a 16.5-inch rim. The tire would not seat on the rim, so the employee used a 150-psi air line to inflate it. The tire and wheel assembly then burst and struck the employee, who suffered a broken arm and lacerations to the arm and face.",1
An employee was in a manlift conducting demolition work. A piece of steel beam broke loose and struck the employee causing a left arm and shoulder fracture.,1
"An employee was removing a 2"" riser pipe from a casing head with a pipe wrench when backside pressure pushed the riser up and it struck the employee's forehead. He was then covered in drilling mud, which evacuated the well behind the pipe. He suffered a forehead laceration and skull fracture.",1
"An employee was feeding a slab of wood into a chipper machine when the slab became stuck. As the employee attempted to loosen it, the employee's finger was smashed between the end feed of the machine, resulting in an amputation.",0
"An employee was working from a ladder, clearing dough from an overhead conveyor. His left hand was caught in the conveyor system's chain and sprocket, and a finger was amputated above the knuckle.",0
"An employee was attempting to repair a slide on a grid casting machine when the die closed and caught his gloved hand. His left thumb was pinched in the mold, resulting in a soft tissue amputation to the left thumb tip (no bone loss).",0
"An employee was replacing batteries on an uninterruptible power source. During the final stage of connecting the cables to the lug, a dead short was created, causing the employee to receive a burn to his hands.",1
An employee was standing at the exit rollers talking with two coworkers. A truss exited the line and struck the back of the employee's leg. The employee sustained severe bruising to the upper right thigh.,1
"An employee entered the modular office building and slipped and fell on the floor, breaking her right wrist and left leg. She was hospitalized.",1
An employee sustained a partial amputation of the left middle fingertip while opening the access door on a filter pod.,0
"An employee was working on a truss press machine. It closed while the employee's left hand was still in it, and the tip of the employee's left thumb was amputated.",0
"An employee was removing a vessel cap when 60% chromic acid solution sprayed out of an open valve and contacted him, causing third degree burns on his shoulder, back, and wrists. He was hospitalized and had surgery.",1
"At about 3:45 p.m. on July 12, 2018, an employee was replacing seals on a plastic extrusion machine. As the employee was installing a pin to connect the screen change plate to the hydraulic cylinder, the cylinder actuated causing the shaft to move outwards and crush his fingers against the extruder. One finger was amputated.",1
"A CNC machine operator suffered an amputation to the left little finger, from the hail to the end of the finger.",0
An employee was performing maintenance work on top of a pickle line tank with the lid off when he became very hot and had difficulty breathing due to heat or hydrochloric acid exposure. He was hospitalized.,1
An employee was hand stacking pallets of bagged talc on a railroad car when the bags slid and fell on top of him.  He fractured his right arm and two vertebrae.,1
An employee started cramping and vomiting in a work truck after chipping bush in a hot outdoor environment. The employee was dehydrated.,1
An employee injured his back while lifting luggage from the trunk of a vehicle.,1
"An employee cut the wire of a lightning arrester. The hot wire then made contact with a metal bracket and a flash occurred, causing thermal burns to the employee's face and chest.",1
"An employee was testing/troubleshooting a wood chipper when the employee's hand was caught in the drive belt, resulting in multiple broken bones and a severely lacerated thumb.",1
"An employee was using an underwater blaster to clear barnacle off of wooden columns when a wave came in and splashed against him, knocking him off balance and into the path of the blaster's water jet, which cut his left index finger. His left index finger was amputated.",1
"An employee was mounting a horse when it bucked him off. He struck his head on the ground, suffering a head laceration and injuries to two vertebrae in his upper back.",1
An employee was cleaning out a bone jam from a conveyor with a hook when the hook came loose from the bone and his hand jerked back. His hand hit the conveyor and about 1/4 inch of his right ring finger was amputated.,0
"An employee was standing on the tines of a forklift while the operator was driving it through a parking lot. The forklift hit a bump, knocking the employee off the tines. The forklift operator then ran over his leg, breaking his femur and ankle bones. He was hospitalized.",1
"An employee was changing a leaking valve on a POD with a wrench. While he was loosening the bolt, the wrench slipped off the bolt and his right middle finger was pinched between the wrench and the edge of the equipment, resulting in a fingertip amputation.",0
"An employee was driving a turf carryall vehicle, which went down a grassy hill and rolled. The employee sustained a cut above the right eye and broken vertebrae.",1
An electrical engineer was checking a newly installed cooling fan in the drive cabinet and received electrical burns to both arms and the face.,1
An employee was conducting maintenance on a conveyor belt and amputated his left index finger.,1
An employee was manually jogging a belt pulley on a dust collector motor when he sustained a partial right pinky finger amputation above the first knuckle.,0
An employee was hospitalized from heat exhaustion.,1
"Employees were rolling telephone poles off a trailer. As a pole came off the truck, it landed on an employee's leg, breaking his tibia.",1
"An employee unloaded two pipe racks off a flatbed trailer, set them aside, and climbed on the trailer to remove the chains from the other racks. The employee then climbed off the trailer and began walking back toward the cab on the driver's side when a pipe rack rolled off the trailer and caught the employee's left thigh, fracturing the left femur.",1
"An employee was wearing gloves while operating a drill press. The employee's glove was caught in the drill, resulting in an amputation of the left pinky finger.",0
An employee fell from a step ladder to the floor and fractured the right hip.,1
"An employee fell down an unmarked elevator shaft, breaking his foot.",1
"An employee was installing drywall on a piece of wall that was laying flat on the ground. Nearby, a 9-foot wall with drywall was already framed and standing on its own with four support braces. Strong winds blew the standing wall down and it struck the employee's back.",1
"An employee was troubleshooting a machine when he pressed something that actuated the pin on the machine. His left thumb was then pinched between the pin and table, resulting in a partial thumb amputation.",0
"An employee was helping to position a jack stand onto a staging area when his left hand went between the edge of the stand and a parked trailer, lacerating his palm.",1
"On July 12, 2018, an employee was cutting a sheet of sticky foam with a manual shear. The shear amputated the employee's left ring finger below the nail and severely lacerated the little finger.",0
"An employee was standing on the second level of pallet bay racking while removing shelving boards above him. As he moved, the boards he was standing on broke and he fell, breaking his left hip and bruising his upper left arm.",1
"On July 12, 2018, an employee was helping to move a 30-foot rinse tank with a castor frame from storage to an operations facility when the top housing of the rinse tank shifted and came down on the frame and the employee's right hand. The employee sustained a right pinky fingertip amputation.",0
"A forklift operator was climbing off his forklift when he slipped and fell, suffering a hip injury. He was hospitalized.",1
An employee was lifting reels of wire from the floor onto a golf cart. The employee suffered a fractured vertebra in the lower back.,1
"At about 1:15 p.m. on July 13, 2018, an employee was driving a forklift. His lift struck a rack and ran over his left foot, lacerating the top and bottom of the foot and breaking several bones. He was hospitalized, and his left little toe was medically amputated.",1
"An employee was attempting to remove a bag that was jammed in a machine when his right hand was caught in the machine. As he pulled his hand out, he fractured his thumb and degloved his hand. The machine was not locked/tagged out at the time of the incident.",1
"An employee was on a roof taking measurements when he slipped and fell 10 feet off of the roof, breaking both heels and requiring hospitalization. The pitch of the roof was 6- to 7 in 12.",1
"The injured employee was using an oxy-acetylene torch to remove one of the legs from the outside of a centrifuge (used process equipment). After 10-15 minutes, the injured employee began having issues with the torch. He paused his work briefly and a second employee came over to assist with lighting the torch. Once the torch was relit, the injured employee resumed cutting activities on the centrifuge and an explosion/fireball occurred. The injured employee sustained severe burns to his forearms and was hospitalized. The second employee was treated and released on the same day.",1
"An employee was delivering concrete beams to a construction project along a highway. During the unloading process, the employee was on the tractor when the employee lost footing and fell approximately 4 feet to the ground. The employee suffered bruised ribs and a dislocated finger, requiring hospitalization.",1
"An employee was working at her desk when ceiling tiles and frames fell, striking her on the face and head. She was hospitalized.",1
An employee exited a lift truck to undo the strap on a core buggy. The lift truck rolled onto and pinched him. He suffered a broken clavicle. The lift truck's emergency park brake was not in place at the time of the incident.,1
"On June 13, 2018, an employee was removing blanks from the rear of a press and suffered an amputation injury to the right middle finger.",1
An employee suffered an amputation while changing a die press.,0
"An employee was trying to secure dunnage in a trailer using a pneumatic nail gun. He was in the process of standing up from a kneeling position when the gun's trigger was caught in his work boots. The tongue of the boots depressed the trigger, causing it to fire a nail into his right lower leg.",1
"On July 13, 2018, an employee felt ill after inspecting a boom lift. The employee was hospitalized for dehydration.",1
"An employee was unchaining a grader from a lowboy trailer. He tripped and fell, and his head struck the trailer. He suffered a cut to the forehead and possibly other injuries.",1
"An employee was cleaning a floor when a dropped knife fell from above, point down, and struck him on the left arm. He suffered a laceration and a severed artery.",1
"An employee was using a crane to move steel plates onto a scaffold's deck. The plates shifted and made contact with a scaffold pole, pinching the employee's left little finger. The employee suffered an amputation/avulsion of about a quarter inch of the finger.",0
"On July 13, 2018, an employee was on a stationary lift under a table. The lift activated and moved up. The employee was smashed against the table, suffering crushing injuries to the pelvis.",1
"An employee was moving a package (containing the casing for an electrical panel) from unloading to a conveyor. As the employee took the one step to the conveyor, the package fell and struck the employee's right ankle, causing a laceration.",1
"An employee was standing in the work area waiting for a pipe fitter to lower when the pipe fitter, which was hoisted on a chain, became dislodged and struck the employee's left leg. The employee sustained a fractured fibula and tibia, requiring hospitalization.",1
"At about 7:30 p.m. on July 13, 2018, a production technician was loading an in-mold labeler with plastic labels. When he reached around the basket to grab labels that had fallen off, the swing arm came down, amputating the tip of his left middle finger without the lost of bone or nail.",0
"On July 13, 2018, an employee was performing a change-over on a foamer. The employee was lowering the locking plate onto the plug; it was misaligned, and the employee pushed on it. The plate aligned and amputated the tip of the employee's left middle finger.",0
A maintenance employee was working on a plastic mold injection machine when it sprayed hot liquid product onto his face. He was hospitalized with second degree burns to his face and hands.,1
"An employee was attempting to remove green bean debris from a machine when his hand became caught in a roller, partially amputating his right middle finger. The machine was guarded at the time.",0
"On 7/13/2018, an employee climbed an 8-foot A-frame ladder to tape an area for painting. The employee finished and was starting to descend when the employee missed one of the ladder rungs and fell to the ground. The employee suffered a head cut and broken right ankle, requiring hospitalization and surgery.",1
"An employee was working from a ladder that was 8 to 10 feet in height when he fell off the ladder, suffering brain bleeding, disorientation, and back fractures.",1
An employee was out delivering mail and parcels when he started to feel ill because of the heat. He was hospitalized for heat stress.,1
An employee was feeding gasket material across a shoe die press when she attempted to clear a piece of material that jammed in the die. The press was activated and severed two of her right-hand fingertips.,1
"An employee was walking down the hallway while carrying tools when he tripped on the seam of a curled up Masonite board and fell, breaking his nose and left eye socket.",1
"An employee was setting a spud on a hydraulic dredge when the spud fell on and crushed the employee's right index finger, resulting in a partial finger amputation.",0
"An employee was descending the stairs, tripped and fell fracturing the right fibula.",1
"An employee was working from a catwalk to perform maintenance on the engine of equipment used to transport crude oils and liquids. While descending the ladder from the catwalk, the employee slipped and fell to the ground, resulting in rib fractures, abrasions to the arm and shoulder, and a collapsed left lung.",1
"An employee was waiting on a backhoe to bring a manhole down from a stock pile to be installed at a pump station. The employee was sliding the manhole ring when a bolt that holds the backhoe blade caught the ring and lid. This caused the employee to lose his grip, and the ring and lid dropped on his left hand, smashing his index and ring fingers and resulting in a middle fingertip amputation.",0
An employee was removing metal bar stock from cantilever racking using an overhead crane. The metal bar stock dropped onto the employee's right middle finger causing an amputation.,0
"An employee was working on a roof, performing preventive maintenance on an exhaust fan. As he tried to grease the pulleys, his hand was caught and pulled through the pulley by the belt. He was hospitalized.",1
An employee was traveling on a forklift beside a second forklift when her arm became pinned between the two forklifts. She suffered a hand injury that required surgery. Her arm was outside the confines of the equipment at the time of the incident.,1
"An employee was descending a 6-foot A-frame ladder when his left leg was caught between the first and second rungs, breaking his left tibia.",1
"A lineman was working on a switch from a bucket, covering electrical power lines with blankets and sleeves. As he reached for a jumper, his sweat-soaked shirt touched a hot jumper at the right arm while his left sleeve touched the switch bracket. A flash occurred, and he suffered first- and second-degree burns.",1
An employee was found on the ground with a fractured tailbone after attempting to clear a conveyor jam. The employee was hospitalized.,1
An employee was using a table saw to cut wood when the saw amputated a finger.,1
"On July 13, 2018, an employee was cutting the top of a concrete wall with a gas-powered handsaw. The saw kicked back, striking and lacerating the employee's face. The employee was hospitalized.",1
"An employee was installing an underground irrigation system when a cap for a 2-inch PVC pipe blew off with approximately 60 pounds of pressure and struck the employee in the right eye area, causing a laceration above the right eye and fractured right eye socket.",1
"An employee was in a warehouse, operating a cherry picker, when another cherry picker struck him. He fell from the cherry picker, breaking his right leg.",1
An employee was working on carpentry with a nail gun when something shot into his eye.,1
"An employee was conducting quality assurance work on a conveyor belt where maintenance was being conducted when he placed his hand on the conveyor rail and the roller pinched his left pinky finger, resulting in a partial amputation/avulsion. The roller was unguarded at the time of the incident.",0
"An employee was on stairs, crossing over a production line, when she fell to the floor and broke her left ankle.",1
"An employee tripped and/or fell to the floor, suffering a broken humerus.",1
"An employee was outside blowing off a concrete pad when he experienced nausea due to dehydration (heat stress), requiring hospitalization.",1
"An employee was stepping over a velvet rope used to quadrant floor areas when the employee caught their trailing foot on the rope and fell to the floor, fracturing the right hip. The employee was hospitalized.",1
"An employee was working in the kitchen area when she passed out due to dehydration, requiring hospitalization.",1
"An employee was sweeping the floor inside a building. A conduit was being installed from the outside of the building; a 4x6x5 piece of stone was jarred loose from the top of a masonry column above where the employee was sweeping. The stone fell 23 feet onto the employee's hard hat, penetrating the hat and lacerating his head. He was hospitalized.",1
"An employee was walking to the break room when she tripped and fell on a piece of plastic that was sticking out from a pallet, fracturing her left elbow and tearing her shoulder tendons.",1
Two employees were lowering a patient into a chair using a lift. The lift tipped and hit an employee on the shoulder and the top of the head. The employee underwent surgery for a brain bleed.,1
An employee was hospitalized for heat exhaustion.,1
"An employee was using an overhead hoist to lift a rig composed of three steel poles. His left thumb was pinched between the chain and the product being lifted, and the tip was amputated.",0
Two employees were clearing a jam on an extruder machine when the hot plastic ejected from the mold and burned one of them.,1
"On July 14, 2018, while delivering mail on foot, an employee became dehydrated and began vomiting. The employee was hospitalized for heat illness.",1
"On 7/14/2018, at approximately 5:30, an employee was found unconscious in his mail vehicle due to possible heat exhaustion.",1
"An employee was on a drilling rig when the shaker tank's overflow line hit and tripped the employee, who fell down stairs off the rig floor. The employee suffered a fractured right tibia and fibula.",1
"At about 11:00 a.m. on July 14, 2018, an employee was cleaning the front/feed roll of a three-roll mill after milling a batch. He was scraping the front roll using a metal spatula, 10 inches long with a 4-inch blade. He had finished cleaning the left side and center of the front roll and had started cleaning the right side of the roll, applying pressure to the spatula with his right hand and using his left hand to support his right hand. He suffered amputations to the left ring and pinky fingers. At the time of the incident, the mill was powered and a guard was in place between the middle and front rolls.",0
"An employee was installing an air handler on a building's second floor using an all-terrain forklift. The equipment had been placed on a 12-by-12 skate and moved to a placement pad. It shifted and struck the employee, causing fractures to the wrist, elbow, and leg, and a laceration to the forehead.",1
"An employee was cutting insulation on a roof edge when the employee fell approximately 25 feet off the roof, landing on pavement. The employee injured the left hand and foot and sustained two spinal fractures.",1
"An employee was working on a press brake when the machine was activated via the foot pedal. The employee's right thumb was then caught between the machine and a part, requiring surgical amputation.",1
An employee was working on a frac tank and fell into the guardrail resulting in injury to the left torso/ribs.,1
"An employee was repairing a water heat exchange. When the water valves were turned on, a PVC pipe burst and hot water struck the employee's face, ear, back and leg.",1
"An employee was troubleshooting an interlock switch on an HVAC unit. The employee's left pinky finger was caught in the HVAC door panel as the employee closed it, resulting in a fingertip amputation.",0
"An employee was pumping raw milk from a tanker truck into a silo when he noticed a connection was leaking. He stood in front of the pipe to tighten the clamp when the pipe separated from the clamp, striking him in the lower abdomen. He was hospitalized.",1
"An employee was pulling a forklift into a battery charging station. His foot and leg were caught between the forklift and a guardrail, and his leg was broken.",1
An employee was replacing the cover on an exhaust fan. The employee's little finger was caught between the belt and pulley disk and the tip was lacerated.,1
"An employee was cutting bone-in rib eye steaks with a band saw when the meat moved and the blade cut his left index and middle fingers, resulting in a partial finger amputation, a finger fracture, and a skin avulsion.",0
"An employee was working on the work-over rig floor when he slipped on some hydraulic fluid and fell into casing tongs, injuring his head and shoulder.",1
"On July 15, 2018, an employee was patrolling on an all-terrain vehicle and rolled it, suffering a broken right forearm.",1
"An employee was removing the lower section of a valve. The pump plunger came forward and pinched the employee's finger, causing an amputation.",1
An employee was sitting in a vehicle and was ready to set rail on a railroad crossing when a train struck the vehicle with the employee inside. The employee suffered fractured ribs.,1
"A spotter was attempting to stop two moving forklifts from colliding when he was pinned between the two, fracturing his tibia and requiring hospitalization.",1
An employee suffered from heat stroke after working outside with asphalt.,1
"On July 16, 2018, an employee was traveling to the airport on a business trip. The employee fell at the airport, suffering a broken right femur, and was hospitalized.",1
"An employee fell off a mobile scaffold when the wheel hit a hole, suffering fractured heels and a bicep cut.",1
"On July 16, 2018, an employee was returning to his vehicle after delivering mail. He tripped on the uneven sidewalk and fell into his vehicle, fracturing an arm and elbow and sustaining a laceration to his knee.",1
"On July 16, 2018, at approximately 1:45 p.m., an employee was climbing a stool to reach papers on a top shelf when she fell and injured her left knee, requiring hospitalization and surgery.",1
"An employee was on a ladder installing a visual display when her foot became stuck and she fell off the ladder, fracturing her leg.",1
"On July 16, 2018, an employee was using an auto cutter when a part became jammed in the cutting hole. As he attempted to clear the jam, the cutting mechanism cut his left middle fingertip, resulting in a partial amputation. The machine was running and guarded at the time of the incident.",0
"An employee was working from a platform at a residence. The platform collapsed and he fell to ground level about 10 feet below. He suffered fractured vertebrae in his back, requiring surgery.",1
An employee was using a forklift to move equipment into a demonstration room. The forklift hit a 480-volt connector. The employee was shocked and hospitalized.,1
"Two employees were working on a roof above 20 feet, both tied off. Work was also being done about 60 feet above them, and debris from that work was striking the employees. The employees detached their lanyards and got closer to the edge of the roof to get the attention of the employees who were blowing the debris down onto them. One of the employees fell from the roof to the concrete about 14 feet below, breaking ribs and his arm.",1
"An employee was changing the shield on an aluminum pot. As he removed the shield, he tried to toss it to the floor, but the latch on the shield caught his glove, causing him to lose his balance. He then fell from the walkway between the pots (approximately 36 inches above the floor) to the floor, landing on his left shoulder, with the shield landing on him. He suffered a contusion to the left shoulder, laceration to the left hand, laceration to the left flank area, and abrasions to the left side of his face, requiring hospitalization and sutures.",1
"An employee was helping another employee put a block under an aluminum mold machine. After he stepped away from the machine, another employee began to turn it on; noticing that the block had shifted, the first employee tried to adjust it. The machine smashed his right index and middle fingers (causing severe lacerations), as well as the tip of his ring finger.",1
"An employee was riding on a pallet of flooring materials on a powered industrial truck (PIT) to stabilize the load. The PIT was being operated with the forks 4-6 feet high. While it traveled from inside the building to outside the building, the bottom of the pallet broke. The pallet flipped forward and the employee was thrown into the air and landed on the ground. The employee sustained a separated shoulder blade, fractured wrist and arm, torn ACLs in both knees that required surgery, and a chest contusion.",1
"An employee was setting up a packaging machine. He tried to pull the packaging film between the machine's cutting jaws, which closed and amputated the tip of his left index finger. At the time of the incident, the machine's safety doors were closed and the safety switches were not activated.",0
"A nurse was working at a nurse's station when she had an allergic reaction to the medication she was administering to a patient. She began to have trouble breathing and became flushed and incoherent, and was hospitalized.",1
An employee returned from his mail route and was not feeling well due to the heat. He was later hospitalized for dehydration.,1
"An employee was dumping grease from a deep fryer. The grease melted the bottom from the bucket and it spilled out. The employee fell in the spilled grease, suffering third degree burns to the knees and random second degree burns to the rest of his body.",1
"An employee was parked on the side of the road changing a tire on a company vehicle when the jack slipped, causing the vehicle to come down. The employee was pinched by the vehicle and sustained multiple fractures to the pelvis and sacrum.",1
"An employee suffered from heat-related illness while delivering packages, requiring hospitalization.",1
"An employee was operating a drill press when the rotating bit caught his glove, resulting in the amputation of his right little finger.",0
"On July 16, 2018, an employee was moving a battery on an assembly line when the employee's right ring finger was crushed between the battery and the conveyor, resulting in a partial amputation. The conveyor was unguarded at the time.",0
"An employee was setting up for a job when a hydraulic hammer fell on and crushed his foot, breaking bones.",1
"An employee was clearing a jam in a case packing machine. As he moved away from the machine, his head struck the frame of the safety cage, suffering a hematoma and possible concussion.",1
An employee was trying to move a train track switch when his finger was caught in the switch mechanism. The tip of his left ring finger was amputated.,0
"On July 16, 2018, an employee was disassembling concrete wall forms while standing on scaffolding when he attempted to transfer from one side of a wall to the other side and fell 14 feet to the concrete below. He suffered rib, pelvic, and heel fractures.",1
An employee was getting mortar for bricklayers when she fell partway through a gap on a scaffold. She suffered bruised/broken ribs.,1
"An employee was moving steel beams when the load hit another beam. He was then pinched between the loads, fracturing his knee and requiring hospitalization.",1
"An employee was standing on a stepladder trimming a tree branch when the branch fell and knocked the ladder over, causing him to fall to the ground. He suffered a head laceration, a fractured collarbone, and fractured ribs.",1
An employee was cutting wood with a table saw to make a box for shipping. The employee turned the saw off and was trying to remove a piece of scrap wood when the blade amputated the tip of the employee's left index finger. The machine was guarded at the time.,0
"An employee was putting a strap around a bundle of rebar to be moved when his left middle fingertip was caught between two pieces of rebar, resulting in a fingertip amputation.",0
"An employee was climbing a ladder to access the roof when the ladder broke. The employee fell 8 to 10 feet, landing on his feet. He broke his right leg and ankle, and dislocated his left knee.",1
"An employee was cleaning the front of a meat grinder that crushes cherries when the employee's index finger was caught in the running blade, resulting in a partial amputation of the fingertip.",0
"An employee used starting fluid as a cleaning agent. Afterward, he lit a cigarette that ignited chemical residue on his hands. He sustained burns to the face and bilateral upper and lower extremities.",1
"An employee troubleshooting a 24V circuit on a heat pump when he received an electric shock, burning his pointer finger and experiencing tingling in his hands and arms.",1
"For three days, an employee's task had been to clean sea salt from an injection pump's inlet tube. The employee had trouble breathing, feeling a sharp pain in the shoulder and pressure in the chest, and was hospitalized.",1
"An employee fell from a ladder to the sidewalk while scraping paint from a building facade, suffering a fractured ankle and tibia.",1
"An employee was walking to his car when he slipped on moss growing on the parking lot surface and fell to the asphalt, fracturing his right hip and requiring hospitalization.",1
"An employee was replacing a gas line. When the employee began to cut the line, a fire caused second-degree burns to the employee's right arm, neck, and face.",1
"On July 16, 2018, two employees were performing maintenance on a piece of heavy equipment that was having issues with its rubber tracks. Employee #1 was operating the machine while employee #2 was watching the tracks. As the track was moving, employee #2's arm entered the track. His left arm was crushed, requiring hospitalization.",1
An employee hit a deer while driving an all-terrain vehicle. He suffered injuries to his face and wrists and was hospitalized. A helmet was not being worn at the time of the incident.,1
"An employee was 8 feet up a 10-foot A-frame ladder. As he began to climb down, he lost his footing and fell to the floor, sustaining a lumbar fracture. He was hospitalized.",1
"An employee was in a trench, cleaning off a duct about 8 feet away. A steel plate slipped while being placed in the trench; it knocked another steel plate (which had already been placed into the trench) against the employee and pinned him against the duct. He suffered a broken pelvis and femur and was hospitalized.",1
An employee was attempting to step onto a rolling rail car when his foot slipped and his right foot went under the rail car wheel amputating all five toes.,1
"An employee had climbed down a ladder and was on the ground beneath a concrete form when it fell onto him, breaking his left arm. He was hospitalized.",1
"On July 16, 2018, a forklift operator's arm was pinned between the forklift and a racking system. The employee suffered contusions and was hospitalized.",1
"An employee was trimming vegetation from an aerial lift. The employee fell from the lift to the ground, suffering a broken left arm.",1
"On 7/16/2018, a temporary employee in training on a filling/packing machine suffered an amputation on her left middle finger. The safety interlocks on the front doors of the machine had failed and it continued to cycle as she was performing maintenance on the machine.",0
An employee was laying sewer line when their hand was caught between the top of the shoring box and the bottom of the excavator bucket. The employee sustained a fractured forearm.,1
"An employee was helping a maintenance employee work on a can wash when the employee was splashed on the mid-section with scalding, hot water.",1
An employee was moving computer equipment and boxes and started feeling numbness in the arms and shortness of breath. The employee was hospitalized for a ministroke.,1
"An employee was helping to move rafters to build a cone on a tank. One of the rafters was hooked onto a tractor. When the employee went to pull the rafter, the joint of the rafter caught the rafter below it, which then slid and put the employee in a pinch point and the line of fire. As a result, the employee broke two bones above her left ankle (tibia and fibula) and three bones in her left foot.",1
"An employee was using acetone to clean dripping foam insulation from a basement wall when the pilot light flame of a hot water tank ignited the acetone fumes, causing first, second, and third degree burns to the employee's legs.",1
"An employee was using tongs to pull a pipe out of a hole when he lost his grip on the tongs and they swung around, striking him. He suffered two pelvic fractures and a tear in his bladder.",1
"An employee was on a site making a delivery when his truck became stuck in sand. As he tried to get the truck unstuck, he became light-headed, requiring hospitalization for dehydration.",1
"An employee was trying to adjust a washer's idler roller with a crowbar. The roller slipped off the crowbar and struck the employee's left middle finger, amputating the flesh of the fingertip.",0
"On July 17, 2018, an employee climbed up the bed of a truck to inspect the lining and fell to the ground. The employee sustained a head and back injury and was hospitalized with a concussion.",1
"While walking into a home, an employee tripped on the threshold. The employee fell into a wall corner and to the ground, suffering four broken ribs. The employee was hospitalized.",1
"While descending a portable step ladder to reposition it, an employee missed the bottom rung and fell approximately 18 to 24 inches to the concrete floor below. The employee was hospitalized with a fractured right forearm, elbow, and pelvis.",1
"An employee was removing lumber from the flatbed of a trailer when he slipped on lumber and fell about 4 feet off the trailer bed. He broke three ribs and one of the ribs punctured his lungs, requiring hospitalization.",1
"While replacing a transformer fan motor, an employee was shocked through the shoulder and out the chest. The employee lost consciousness.",1
"On July 17, 2018, an employee opened the door of a trailer and was struck by unsecured cargo, injuring his knee and requiring surgery.",1
An employee was using a hole punch machine when the handle came down onto the employee's hand and caused an open fracture to the right ring finger.,1
An employee was adding water to the radiator of a piece of heavy equipment when a front end loader struck him. He suffered abdominal injuries and a broken pelvis and was hospitalized.,1
"A temporary employee was running a compacting press when his right hand entered the machine while it was in a downward motion. The press compacted, severing his right index finger and requiring hospitalization. The punch process of the machine was not guarded at the time of the incident.",1
"An employee was clearing a plugged production line when the employee contacted the pump rotor, resulting in a right index fingertip amputation.",0
"An employee was adding a bag of sodium thiosulfate to a storage tank containing sodium hypochlorite and a weak caustic solution. The bag fell into the tank and the liquid in the tank splashed onto the employee causing second degree burns to the right and left thigh, abdomen and left hand.",1
"On July 17, 2018, an employee had just finished a bar change when he bent over to grab a part. His hair was caught in a rotating bar on the screw machine. He suffered a partial hair/scalp removal and was hospitalized.",1
"The injured employee was training another employee on how to operate a forklift and pick orders. The injured employee stepped between the forklift and a rack beam before the employee driving the forklift came to a complete stop. The employee driving the forklift turned to straighten out the forklift, at which time the injured employee became pinned between the forklift and the rack beam, suffering a broken bone in the shoulder area, broken ribs, and a facial cut.",1
"An employee was unrolling a roof ice guard when the employee fell off the roof to the ground, suffering a ruptured spleen, collapsed lung, and injured rib.",1
"An employee was holding a knife while putting on his personal protective equipment (PPE) when his PPE fell on the ground. As he bent down to pick it up, the knife punctured his abdomen.",1
An employee was holding bushing pullers while attempting to set bushings when he was struck on his lower back area with a bushing puller (an approximately 1 inch X 2 feet metal device connected to a hoist for lifting). He suffered a spleen injury that required surgery and hospitalization.,1
"An employee was moving dishes. As she turned her body at the waist, she felt a pain, which did not go away. She was hospitalized, having possibly suffered a torn abdominal muscle.",1
"An employee was standing on a 10-foot A-frame ladder installing an eave drip. The ladder shifted and he fell about 5 feet to the ground, fracturing a vertebra in his lower back. He was hospitalized.",1
"An employee was struck by a falling utility pole and suffered a fractured ankle, requiring hospitalization.",1
"An employee was making a patient's bed when she slipped, fell to the floor, and broke her hip.",1
"At about 10:15 a.m., an employee entered an operating room that had recently been ""turned over."" He slipped on the wet floor as he entered the room, falling to the floor and hitting his neck, head, and shoulder. He suffered swelling and contusions to two vertebrae in his neck.",1
"An employee was attempting to remove chips from the vise in the material holding area of a band saw when the sawblade caught his left pinky, causing an amputation.",1
"An employee was struck on the right elbow by a rod wrench while he was backing off a rod coupling. He suffered an open laceration and non-displaced fracture to the right elbow, as well as a fracture to the left index finger. He was hospitalized and had surgery.",1
An employee was struck in the jaw by a section of conduit as it was being pulled from the ground by an excavator and broke free. The employee's jaw fractured.,1
A certified nursing assistant felt severe lower back and hip pain after pushing a shower chair.,1
"An employee was working outside on July 17, 2018, preparing for the next day's job when he started not feeling well. The next day, July 18, 2018, the employee was at a customer location working and started vomiting and was unable to keep any fluids down. The employee was hospitalized for heat exhaustion and renal failure.",1
"An employee was fabricating a frame support for a shackle line. The frame detached and fell, hitting the employee's right leg above the ankle. The employee suffered a laceration and fracture to the leg and was hospitalized.",1
An employee suffered a severe laceration to the right foot from being struck by a loaded pallet/forklift.,1
"An employee was mixing lithium aluminum hydride with dioxane when a reaction occurred, causing an explosion. He suffered a torn tendon in his upper extremities among other injuries.",1
"An employee was walking from a desk to a copier when she fell to the floor, suffering a broken rib, torn liver, and facial bruising. She was hospitalized.",1
"On July 17, 2018, an employee was working in an elevator platform when one of the hoist sheaves suddenly rotated and hit him in the head. It then returned to its original position, knocking off his hardhat and lacerating his scalp.",1
"An employee was stepping on a pallet when a slat broke. As he attempted to remove his foot from between the broken slat, he lost his balance and fell to the concrete floor, fracturing his left hip.",1
"An employee tried to reconnect an airline hose to a tilt table after using the hose to clean a piece of equipment. The table had been switched on, and it began to move to a vertical position while the employee was leaning under it to connect the hose. The employee was pinned between the table support beam and the front edge of the table. The employee suffered broken vertebrae in the back and was hospitalized.",1
"A crane operator was off loading nine foot steel round billets from a trailer to a nearby billet pile.  Steel yard attendants assist the operator with final positioning of the billets from ground level using no-touch tools. The injured employee used his hand on the end of the billet to push and align it with the row. At this time, the second billet released from the crane magnet and contacted the injured employee's right hand. The employee sustained a partial amputation of the right thumb at the distal joint.",0
"An employee was on the back of a trash truck throwing trash when his body started cramping, requiring hospitalization for dehydration and heat stress.",1
"An employee was installing a chain on a conveyor when another employee activated the conveyor. The employee's right middle fingertip was then caught in the chain and sprocket, causing an amputation.",0
"On July 18, 2018, the injured employee was operating a stand-up commercial riding mower. At approximately 2:15 p.m. a skid steer driven by a second employee collided with the riding mower. The injured employee was knocked to the ground during the collision. Immediately after falling off the mower, the employee was run over by the skid steer causing multiple leg fractures and lacerations.",1
While flushing chemical from a tanker truck an explosion occurred that burned three employees. One of the injured employees was hospitalized with burns to the face and hands.,1
"An employee was laying down casing. The casing elevators opened and the 7"" casing fell onto the employee. The employee sustained a fractured shoulder and ribs and head trauma.",1
"An employee was standing on site when the wind picked up a 3/4-inch plywood board and threw it towards the employee. The board struck his head, causing cerebral contusions.",1
"An employee was on top of a heat furnace line, tightening bolts on a motor. The employee's left ring and little fingers were amputated.",0
"An employee was caring for a patient in the patient's room. The employee tripped (possibly over a cord) and fell, suffering a broken right leg/pelvis.",1
"An employee was helping build a water pump when he fell, hitting and breaking his leg on a concrete wall.",1
"An employee was stocking bananas while standing on the pallet containing the bananas. She picked up a box of bananas while still standing on the pallet, then attempted to step off the pallet. As she did so, her foot became entangled with the shrink wrap, causing her to fall to the floor and injure her hip.",1
An employee was loading packages into a trailer for 10 hours and began cramping throughout their body. The employee was hospitalized for heat stress and dehydration.,1
"An employee tripped on a floor mat and fell to the floor, breaking her hip. She was hospitalized.",1
"An employee picked up concrete at a concrete plant and delivered it to a home. At an unknown point he suffered a concussion, apparently from slipping and bumping his head on a hard surface.",1
"An employee turned 90 degrees to reach for a part, lost her balance, and fell to the floor. She injured her hip and was hospitalized.",1
"An employee was walking between rooms, tripped and fell striking her head on the wall.",1
An employee was driving a forklift close to a stack of crates and his left hand was caught between the forklift's protective cage and the stacked crates causing a broken wrist.,1
"An employee was throwing scrap glass into a dumpster. The glass hit the corner of the dumpster and bounced back, lacerating the employee's forearm.",1
"An employee was attempting to clean a tank when the air distribution system was activated, causing the solution (hot water mixed with a 10% concentration of degreasing agent) in the tank to cavitate over the edge and land on the employee's neck, upper back, leg, right ankle, and chest. The employee suffered first and second degree burns.",1
An employee was stung by a bee during a delivery and suffered an allergic reaction.,1
"An employee was operating a mechanical punch press, which caught the employee's left middle finger. The employee suffered a partial amputation of the finger.",0
"An employee was struck by a powered industrial vehicle while unloading cargo, suffering multiple right foot fractures.",1
"An employee was trying to adjust a metal personnel door on a building that was being assembled. The door was not closing properly; he was pushing on the outside bottom of it, trying to adjust the fit, while another employee was on the inside trying to help him. The door closed unexpectedly, pinching the bottom of his right index finger in the jamb and cutting off the flesh below the nail.",1
"An employee was working from a stepladder when it broke. In falling, he grabbed the steel rail of a garage door and his right hand was lacerated.",1
"An employee fell to the pavement in a company parking lot, suffering contusions to the right arm and left knee. The employee was hospitalized.",1
"An aircraft mechanic was working on the left wing of an F-18 aircraft removing a component section of the wing known as a flight control surface. During this process the employee pushed on a bolt with his finger. When the bolt moved, the employee's right index finger followed and was caught in a pinch point by the weight of the falling component. The fingertip was amputated.",0
An employee was performing a quality control check on a loom and became lightheaded and lethargic. The ambient temperature was high and the employee was hospitalized for dehydration.,1
"An employee was working on an overhead garage door opener. The employee's left index finger was caught in the chain and sprocket, resulting in an amputation to the fingertip.",0
"An employee was working on a work-over rig. The employee climbed onto a derrick, about 5 feet above the ground, then slipped and fell to the ground. The employee's left wrist was fractured.",1
"An employee was sliding a part over a diamond hone when the reamer caught his heavy-duty glove. The glove was pulled in, and he suffered lacerations and possible fingertip amputations to his right index and middle fingers.",0
An employee was adjusting a bar sitting on two posts. When the employee moved the hook that the bar was hanging from the bar dropped one to two inches and struck the employee's left middle finger. The fingertip was amputated.,0
"An employee was moving a pallet from one location to another when he struck an upright support beam for a racking system. His left hip struck the upright beam, resulting in a broken pelvis on his left side. He was hospitalized.",1
An employee was helping one of his co-workers move an extension ladder to another location when he felt a pain in his chest due to a possible muscle strain. He was hospitalized.,1
"An employee was lifting a steel plate with an overhead crane when the employee's right middle and ring fingers were caught between the steel plate and a steel block, smashing the fingertips.",1
The injured employee was forming a semi tank trailer bulkhead when the bulkhead material failed and released air that dislodged the machine guarding shield. The shield struck the employee and knocked the employee to the ground. The employee sustained a skull fracture and fractured vertebrae.,1
An employee was cleaning a printing press after a press run. His gloved finger became stuck in the equipment. His left middle finger was crushed and had to be partially medically amputated.,1
An employee was working outside weed eating a pond area when he became dizzy and unresponsive due to heat stress and dehydration.,1
"An employee was pushing a cart when he slipped on spilled liquid soap, fracturing his left ankle. He was hospitalized.",1
"At about 2:00 p.m. on July 18, 2018, an employee had opened the top hatch of a heat exchanger hopper and was changing an air filter. The employee became unresponsive due to a lack of oxygen, possibly because nitrogen gas had displaced the oxygen.",1
"An employee was laying poly pipes when he reached under the poly pipe and was bitten by a rattlesnake, requiring hospitalization.",1
"An employee was removing the cap from a hot radiator. The cap exploded when the employee's wet towel touched it and hot radiator fluid burned the employee's face, neck and torso.",1
"An employee was lowering a steel I-beam when the beam shifted, striking his chest. He suffered broken ribs and bleeding in the lungs. He was hospitalized.",1
An employee suffered dehydration while working outside.,1
"An employee was going to remove the tarp from a compactor. Another employee was unloading a roll-off container in the transfer station and didn't realize the injured employee was there. The injured employee's right leg was pinched between the roll-off container and the compactor, resulting in a right leg amputation.",0
"An employee was performing manual labor to build a solar farm outside when he began feeling unwell and experienced severe cramps in his stomach, legs, neck, jaw, and hands. He was hospitalized for dehydration and kidney malfunction due to heat stress.",1
"An employee was helping straighten out steel coils. Bands were in place to hold the coils; a hold-down bar was about to be lowered so that pressure could be applied to a coil and the bands would be further tightened. The bar was lowered while the employee's right hand was on top of the coil. His index fingertip was caught between the coil and the bar, resulting in an amputation.",0
The cable of a ladder hoist amputated two of an employee's fingers.,1
An employee suffered a partial finger amputation while either opening or closing a glass door.,0
An employee was bitten on the left thigh by a brown recluse spider. The bite became infected and the employee was hospitalized.,1
"An employee was operating a 12-passenger bus at the Hall of Fame Museum located at the Speedway. When the employee exited the bus to assist a passenger, the bus rolled and the employee was hit by the door. The employee then fell under the bus and the bus ran over the employee's chest and continued to roll approximately 25 feet before it struck a building. The employee sustained several rib fractures and a laceration that required stitches.",1
"An employee was working from a scaffold and fell 12 feet to the ground. The employee sustained a broken shoulder, hand and pelvis.",1
An employee experienced severe heat cramps after hauling trash. He was hospitalized.,1
An employee was cleaning pieces of metal from a catwalk and stairs into an automobile shredder when they began to feel ill and vomited. The employee was hospitalized for heat stress.,1
An employee suffered heat cramps while delivering mail and was hospitalized.,1
An employee was fertilizing lawns and suffered heat stress symptoms. The employee was hospitalized.,1
"An employee was working at an oil well when his work truck failed to stay in park and rolled downhill, pinning him against a generator. His tibia and fibula were broken.",1
"An employee was testing a coolant system when coolant sprayed from the radiator's open cap, burning his face, neck, chest, and arms.",1
An employee was assembling a sheave and amputated the left pinky fingertip when it was caught between the belt and the metal edge of the sheave groove.,0
An employee was engaged in various electrical installation activities throughout the day. That evening he began to feel ill and was hospitalized for dehydration.,1
"An employee was setting up a band saw for cutting round bar. While cleaning out the shavings, the clamp closed onto his left hand causing a partial amputation of the left pinky finger.",1
"A employee was attempting to chisel through a tuyere on a cupola melt deck that had started to solidify. When he created a hole through the chilled iron, molten iron exploded out of the tuyere and struck him on the right side of his face and neck. As he moved out of the way, he tripped over a water pipe on the deck; he fell, striking his head on the metal deck and losing consciousness.",1
"An employee was running a metal press when the material shifted, pinching his finger and amputating the tip.",0
An employee was painting a wall using a six-foot step ladder. The employee fell backwards off the ladder when the ladder wobbled and suffered a back injury.,1
An employee's fingers were pinched between a mold panel and the ground. Three of the employee's fingertips were amputated.,0
"An employee was on a metal deck roof when he fell through a skylight to the concrete floor, about 15 feet below. He suffered a broken left femur and a laceration to the face.",1
"On July 19, 2018, an employee was installing a brace assembly. While stretching over machinery, he sneezed and injured his back.",1
"An employee was driving his forklift down a receiving aisle when it collided with another forklift. The employee's left leg was caught between the two forklifts, suffering a fracture. He was hospitalized.",1
An employee was preparing to unload liquid asphalt from the tanker truck into the storage tank at the asphalt plant. Hot oil splashed onto the employee after the cap was removed to hook up the hose. The employee sustained burns to the arms and shoulders (4.5% of his body). The safety valve was not closed at the time of the incident.,1
An employee was on the roof of a residential property cutting plywood with a circular saw. The employee lost his footing while operating a circular saw and the saw lacerated his left forearm. The laceration reached the artery and required surgery.,1
"While welding a tab to the end of a pipe, an employee was struck in the head by another pipe that was being moved laterally by another employee. The employee suffered an epidural hematoma.",1
"An employee was working from a scissor lift about 4 or 5 feet above the ground, removing R-panels from the outside of a tin building. He slipped, and his right hand contacted an exhaust fan mounted on a panel. The fan blade lacerated his right ring finger and partially amputated the nail bed on the little finger.",0
An employee was installing sod at a golf course when the sod installer ran over his left foot/ankle fracturing the ankle.,1
"An employee was standing behind a gate in a cattle barn. Some cattle entered the barn and hit the gate, pushing the employee into a horizontal pipe and severely injuring his back. He was hospitalized.",1
An employee was removing boxes from the conveyor belt and caught their left middle finger in a pinch point causing a deep laceration.,1
"While operating a double pallet jack, an employee ran into a warehouse shelf. The employee was caught between the shelf and the jack and sustained lacerations to his legs.",1
"An employee was riding in the basket of a bucket truck placing cable from pole to pole. As the truck advanced slowly along the ground, it struck a hole. As the truck moved out of the hole, it rocked and the employee fell from the bucket to the ground. The employee sustained fractured vertebrae and a spinal injury.",1
"On July 19, 2018, an employee was operating a rebar bender. While attempting to correct a previous bend, the rebar bent back around itself and pinched the employee's finger resulting in a laceration requiring three stitches and a partial amputation.",0
"Two employees were in an altercation in the breakroom. The FASI employee was struck in the face by a temporary employee, fell to the floor and sustained a fractured skull and a head wound that required staples. The injured employee also sustained internal bleeding and was hospitalized.",0
"An employee was applying sealant to a duct from an 8-foot ladder. The employee fell to the floor, suffering a broken left leg that required surgery.",1
"An employee was using an excavator to lift a pipe. The pipe slid off the sling and fell through the cab, striking and injuring the employee's right leg.",1
An employee fell while replacing a valve on a hydrus tank and injured their C6 and C7 vertebrae.,1
An employee was clearing a jam on the decaser machine and amputated the right pinky fingertip below the nail.,0
"An employee was repairing a billboard and fell approximately four feet to the ground, resulting in a broken left leg.",1
An employee's foot was run over by a scaffold used alongside aircraft for maintenance repairs.,1
"A temporary employee tripped on the corner of a pallet, falling to the floor and breaking her hip. She was hospitalized.",1
"An employee was assembling a hydraulic cylinder and rod assembly with the gland on it for a ram car. A crane was used to support the rod while it was partially lowered into the cylinder to start the gland. As the employee was pushing down on the gland to start engagement of the threads in the cylinder some slack was left in the chain holding the rod, allowing the rod to drop and pinch his fingertips between the rod eye and the gland. When the rod dropped down into the cylinder his right index and middle fingertips were pinched off between the rod eye and the gland.",1
Two employees were working at a table saw. The injured employee walked past and a 4x4 piece of wood that was being cut kicked back from the table saw and struck the injured employee in the eye.,1
"An employee of Balfour Beatty was partway up a 12-foot A-frame ladder, working with a crew to put up steel canopies on a rail corridor expansion. A tack weld broke on the steel post that was being used to push a canopy up into position. The post struck the employee's ladder, causing him to fall about 5 feet. He hit his head in falling, suffering a possible concussion; he also suffered a fractured wrist and a cut on the neck from the post.",1
A temporary employee was cleaning behind the radial saw and contacted the saw blade causing a laceration to the right index finger and amputation of the right middle finger.,0
"An employee was operating a long fork when he struck a metal rack. He was caught between the long fork and the rack, fracturing his left femur and the base of his spine.",1
An employee was jacking up a truck at a scale house on the interstate. He was underneath the truck trying to position the jack stand in the correct spot when the truck slipped off the jack and the jack handle hit him on its way to the ground. He suffered a fractured sinus.,1
"On July 19, 2018, an employee was changing a sprocket wheel on a cold-forming header machine when the sprocket wheel turned and pinched his right middle finger, resulting in a fingertip amputation.",0
"On July 20, 2018, an employee tripped on a sidewalk and fell, suffering a fractured hip and requiring hospitalization.",1
"An employee was throwing chains under a 4-foot bar. When he went to grab the hook, the bundle shifted and pinched his forearm between two bundles. He suffered a fractured forearm and muscle damage.",1
"An employee walked for a quarter of a mile on foot escorting oversized loads. As he got back into his vehicle, he started having severe cramps and abdominal pain due to heat-related illness.",1
"An employee was holding a motor while making adjustments. The belt and pulley caught the employee's left little finger, amputating the tip and causing an open fracture of the last joint.",0
"An employee was operating a ramp service SUV when he crashed into a catering operations truck behind an airport gate. He fractured his ribs and neck, requiring hospitalization.",1
"An employee was walking on the roof of a school, 20 feet above ground level. The employee fell through the gypsum roof deck and was injured requiring hospitalization. The employee suffered a fractured pelvis, ribs, right hip, tailbone, vertebrae, wrist, and humerus as well as nerve damage and temporary blindness.",1
"While gathering hogs, an employee received a puncture wound in the leg from the tusks of a boar. The employee was hospitalized, having suffered a knee injury and infection.",1
"While cutting branches with a table saw, an employee suffered a severed little finger and severe lacerations to two other fingers.",1
An employee was mowing turf using a stand up riding mower when he struck a surface root and the mover overturned. He was hospitalized for severe damage to muscle and tissues of the arm and amputation of the right ring finger.,1
Two employees were about to weld two steel coils together. An employee was lining up the two pieces so that a clamp could come down to hold them. The clamp came down while the employee's left hand was still under it; his thumb was smashed and the tip was amputated. He was hospitalized.,1
"An employee was tripping pipe out of a hole when his right hand was caught between the handle and the elevator, injuring his index and middle fingers.",1
"An employee was walking on a 36"" I-beam, uncovering it, when he lost his balance and fell five feet to the ground, hitting his head.",1
"An employee was attempting to remove fibers from a mat cutter blade when it cut his right index fingertip, resulting in an amputation.",0
An employee was moving an aluminum sheet when it slipped. The employee attempted to grab it and the sheet lacerated the employee's right wrist.,1
An employee was cleaning out an onion slicer when the blade amputated the employee's left middle fingertip.,0
"An employee was driving an order picker by a parked pallet that had a portion of rail protruding into the lane of traffic. The employee did not see the protruding rail, which contacted the picking plate area of his order picker, causing the rail to swing around and strike his calf.",1
"An employee was staging an air compressor that was set on a trailer in preparation to run a ""pig"" through a pipeline. The trailer wheels jumped the vehicle chocks and started to roll. The employee tried to grab the trailer to keep it from rolling. The employee fell to the ground and the jack stand for the trailer landed on the employee's legs. The employee suffered a fractured left leg and possible fracture to a right toe, requiring hospitalization.",1
"An employee was preparing an HVAC unit for shutdown when the employee's left index finger became stuck between the HVAC unit's belt and sheave, resulting in an amputation of the finger.",0
"An employee was washing a crane tire when it fell on his lower leg, fracturing his tibia and fibula.",1
"An employee was scanning parcels outside of a delivery address when an axel broke on a large catering truck riding on the freeway and a tire flew off the vehicle, hitting the employee's face, head, and chest. The employee suffered a broken nose, broken ribs on both sides, and broken vertebrae.",1
"An employee's finger was caught between a door and a door frame when the door closed on her hand, smashing her index finger. She was hospitalized and had surgery.",1
"At about 10:35 a.m. , an employee was mowing grass in a playground when he became ill. He was hospitalized for dehydration and heat exhaustion.",1
An employee was conducting a training exercise with a canine unit when he suddenly felt a shortness of breath and dizziness. He was hospitalized for dehydration and renal failure.,1
An employee's foot was caught between a truck's lift gate and the truck when the gate was raised. The employee's right big toe was amputated.,0
"An employee was using a powered can opener. When the opener activated, it put pressure on her little finger, partially amputating it.",0
"An employee was adjusting the forks on a forklift when his right ring finger was caught between the forks and the mast of the forklift. His right ring finger was severely lacerated, requiring hospitalization and surgery.",1
"While walking on the shop floor, an employee tripped on a motor guard and fell to the ground, suffering a broken hip.",1
"An employee fell 12 feet while decking a first floor resulting in broken ribs, a fractured wrist and a ruptured spleen.",1
"An employee was using a ladder to retrieve material from a top shelf. The employee fell, suffering an injury to the left ankle.",1
"An employee was walking down the stairs with two trays of food. The employee missed a step, dropped a tray of food and reached for the handrail. Her right arm went between the wall and handrail and her right forearm was fractured in two places.",1
"An employee was using a walk-behind mower on an incline. The employee tripped over a rock, and the mower ran over the employee's left foot. The employee was hospitalized.",1
"An employee was exiting a personal elevator when it moved to level itself to the floor and caught his foot in a pinch point, crushing his foot and breaking two toes.",1
"An employee was working inside a tractor trailer during a delivery when he lost his balance and fell from the open door of the tractor trailer, landing on the lift gate support. He suffered three fractured right-side ribs and a punctured lung.",1
An employee was sanding a thin piece of metal on a table disc sander when a metal piece and the tip of the employee's right thumb were pulled into the gap between the disc and the table. The tip of the employee's thumb was amputated.,1
"A temporary foundry employee was sitting in the break room to seek relief from the heat when he vomited and lost consciousness. He fell out of his seat and hit his head on the ground, suffering head trauma. He was hospitalized for heat exhaustion.",1
"An employee was walking when a customer's child ran into her, causing her to fall to the floor. She broke her right hip and right shoulder.",1
"An employee was exiting a service truck when he shut the door on his left middle finger, smashing his fingertip and resulting in a partial fingertip amputation.",0
"An employee was doing preventive maintenance on an air handling unit. The employee's right ring finger was caught between a belt and pulley, leading to a partial amputation above the first joint.",0
An employee was assisting to subdue a patient when they fell and struck their head on the floor causing a subdural hematoma.,1
"An employee was using an overhead crane to remove a scrap box (2,800 pounds) when the hook disengaged during the lift. The handle (which weighs about 500 pounds) then hit his leg, breaking his right tibia.",1
"An employee was in a lift with a blasting hose that was tied to the lift basket so the employee could work at an elevated position. During this time, the hose was charged, activating the discharge of shot blast. This caused the hose to whip around violently while discharging grit. The blasting nozzle struck the employee's face and shot blast was embedded in his face.",1
"Two maintenance employees were working on a compressor inside an exhauster building, tightening screws on the valves/pistons. The outside cover was removed on this unit to gain access to the set screws. One employee left the area and the other employee continued to work when a flash explosion occurred. The employee suffered first and second degree burns to the face and arms.",1
"On July 21, 2018, an employee shut the sliding door of a mail truck on their hand, causing a laceration that required surgery.",1
An employee felt ill and was hospitalized with symptoms of dehydration.,1
"An employee was adjusting material on a tail stretcher when his right index finger was caught in the tail stretcher's clamp, resulting in an amputation.",0
"An employee was unloading furniture from a truck to a dumpster when an armoire fell on the employee's left hand, resulting in a finger amputation.",1
"On July 21, 2018, at approximately 11:15, an employee was getting up from her desk when her foot was caught under her desk and she fell to the floor, striking her head and suffering a spinal injury. She was hospitalized.",1
"Employees were on site cleaning up after a benefit event when an employee lost control while rolling a table. The table then hit a second employee and caused her to fall to the floor, fracturing her pelvis.",1
"An employee was using a circular saw to cut two-by-fours. The saw kicked back, causing the amputation of the employee's left thumb.",0
"An employee was attempting to remove a piece of structural steel from around a furnace. He stepped down, then tripped and fell approximately 20 feet down a chute to the ground, dislocating his right shoulder. His harness was unhooked at the time of the incident.",1
An employee was cleaning a distributor belt when the belt was manually moved forward and pinched the employee's foot between a cog and track (rail). The employee sustained a partial amputation of the right small toe to the first knuckle.,0
An employee was cutting a piece of dealt paper with a box cutter when the blade cut through the paper and lacerated his knee.,1
"An employee was picking furniture with a lift when a piece of furniture fell from above, striking the employee in the head.",1
"An employee was completing a tooling repair on a set of trim dies. While he was maneuvering the trim component, he slipped and his left ring finger was caught between the two die components. He suffered a severe laceration and fracture to the fingertip.",1
"An employee slipped on spilled fuel and fell, striking their head on concrete. The employee suffered brain swelling.",1
"An employee was shocked while plugging in a vacuum cleaner, suffering an injury to the right hand.",1
"An employee was changing a bottom hole assembly and laying down a stabilizer and pony sub. Nearby rig hands could not get a pipe to a trowel. He saw they were in trouble with the pipe and attempted to help get the pipe to the trowel, but the driller did not land the pipe in the trowel. The pipe landed on the edge and rolled out, pinching him against a frame and stabilizer. He fractured his scapula and the spinous processes on his vertebrae.",1
"On 7/22/2018, an employee was moving  a piece of equipment when his left thumb was smashed between it and another piece of equipment. As he attempted to pull his thumb out, his left thumb tip was amputated.",0
An employee was performing start-up activities when piping failed and hot process condensate water caused second degree burns to 20% of the employee's body (torso and legs).,1
"An employee was checking the vacuum on a machine when he noticed that the water level was getting high in the slurry. He discovered that pellets were clumping together; when he tried to stir the water, he received an electrical shock caused by a wire that had shorted out. He suffered head and neck pain and was hospitalized.",1
"An employee was walking toward a disconnect to de-energize a plant air compressor that was making an odd noise when an oil line (that supplied lubrication for the compressor) burst, spraying hot oil onto the employee. He suffered burn injuries to his back, left forearm, and shoulder blade.",1
"At about 8:10 a.m., an employee was working at a saw unload station when fingers on his left hand were pinched between two heavy parts. He suffered lacerations and a partial fingertip amputation to the middle finger.",0
"An employee was standing on an extension ladder 16 feet above ground and pulling wire through a conduit when the wire broke, causing him to lose his balance and fall to the concrete floor. He broke his left and right heels, as well as his L3 vertebra.",1
"On July 22, 2018, an employee was operating a roller on golf course turf when it hit a rock and rolled over. The employee suffered shoulder and sternum injuries and was hospitalized.",1
An employee was hospitalized after fainting due to work stress.,1
"An employee stepped up to enter a guard shack, lost balance, and fell onto a concrete floor. The employee suffered a broken femur.",1
An employee was struck by a falling tree limb while standing on a sidewalk in preparation for powerline work. He suffered an L1 vertebra fracture and seven broken ribs.,1
"On July 22, 2018, an employee tripped and fell to the ground while bringing up mushrooms for a price check. The employee suffered a fracture to the left hip, requiring hospitalization.",1
"An employee was operating a walk-behind pallet jack when he bumped a stack of pallets with his left arm, causing him to lose his balance. He then fell and fractured his right hip.",1
"An employee was adjusting a tube-bending machine when the machine cycled, causing a partial amputation to the tip of the employee's right ring finger. The machinery was not locked out at the time of the incident, and blocks designed for it were not being used.",0
"An employee was using a prybar to help another employee remove a quick coupler from a wheel. When the coupler came free, it landed on the employee's right foot, breaking every toe. The employee was hospitalized. Steel-toed boots were not being worn at the time of the incident.",1
"An employee was stripping concrete forms in a lube oil sump. The temporary 2x4 handrails failed, and the employee fell 12 feet to a lower level, fracturing ribs and injuring parts of his spine.",1
An employee was walking into a day room when she slipped and fell on a wet floor that was just recently mopped. She fell on her left knee and fractured her kneecap.,1
An employee was acting as a ground guide for a rough-terrain forklift that was loading material onto a flatbed truck. The forklift's boom came into contact with overhead power lines while the employee was touching the forklift. The employee suffered electrical burns to his hands and feet.,1
"An employee was walking on a carpeted floor when she tripped and fell to the same level, fracturing her right hip.",1
"An employee was doing preventive maintenance on a fan belt. The motor to the belt started, and the fan blade amputated the employee's right little finger. The disconnect was off at the time of the incident.",1
"An electrical crew was about to jump out a potted porcelain cutout that had cracked. An employee was under the cutout, preparing the jumper, when the bottom of the cutout broke free. It hit the employee in the jaw, causing jaw and ear injuries.",1
"An employee was using a three-step stepladder to hand a blind into a nursing care resident's room. The employee fell from the ladder, breaking their left tibia and fibula. The employee was hospitalized.",1
"An employee was clearing metal chips or shavings from a horizontal band saw cutting table when his gloved hand made contact with the saw blade. His hand was pulled into the blade and drive wheel, resulting in an amputation of his right pinky finger at approximately the second joint.",0
"An employee was at a log deck area when a log got hung up on the deck. When the log was lifted and placed down on the deck, the employee's right index finger was caught between it and a piece of support metal. The employee suffered a crushed finger and an amputation of the fingertip.",0
"An employee was using a saw to cut 4"" off of a 4"" diameter pipe when their left index finger contacted the blade causing a partial amputation.",0
"An employee was installing a bread handling machine. A crane was lifting the steel frame from the bread handler when the cables lifting the frame broke. The frame struck the employee, breaking the employee's pelvis and arm.",1
"An employee was standing on a 2-foot platform that has rails on three sides, reaching for strips of lumber to come out of a rip saw, when he fell on the ground. He broke his left wrist and hip.",1
"An employee was walking when she fell off a loading dock platform to the ground, requiring hospitalization for contusions to the right wrist and head.",1
An employee was hospitalized for a broken hand due to a machine injury.,1
"An employee was standing in front of a wooden pallet, preparing to position a box on it. The employee bent over and fell to the floor, suffering a broken right ankle.",1
"On 07/23/18, an employee was working with a grinder and low carbon cast steel shot that contained iron, manganese, carbon, and silica. He experienced respiratory issues and leg and foot swelling. He was hospitalized for congestive heart failure.",1
"An employee was threading paper on an inner folding machine's rollers. At the same time, another employee began turning the manual hand wheel to turn the rollers. The injured employee struggled to position the paper and reached around the vacuum drum to help thread the paper when his hand contacted the blade, resulting in a fingertip amputation. The blade was guarded at the time of the incident.",1
"An employee was making a wooden pallet. With a nail gun in his right hand, he picked up a board with his left hand. The nail gun discharged, shooting a nail into his left wrist.",1
"An employee fell while walking away from a register, suffering a broken right leg. The employee was hospitalized.",1
"An employee was operating a lift to move a pallet of plywood when the forks extended to another stack. When the lift started to lift the intended pallet, the subsequent stack behind it started to lift and tilt and then fell. An employee walking nearby was caught under the pallet of plywood and suffered a fractured skull, two broken ribs and lacerations.",1
"An employee was walking by a cart when a box fell off the cart and landed on the employee's foot, breaking it.",1
"On 07/23/2018, at approximately 8:55 AM, an employee slipped and fell approximately 4 feet off a flatbed while attempting to secure a dozer that had recently been loaded on the flatbed. The employee suffered a fractured hip and shattered foot. It was raining at the time of the incident.",1
"An employee was positioning blankets and a dolly in the bed of a truck when the driver entered the cab and started to pull forward, causing the employee to lose his balance and fall approximately 4 feet to the ground. He broke his right foot.",1
"An employee was operating a press when the feeder jammed and the product did not advance. The feeder cycled, partially amputating the employee's right thumb.",0
An employee was injured at the worksite and hospitalized.,1
"An employee was hooking a cable from a truck to a dumpster, preparing to raise and empty the dumpster. His left index finger was pinched between the trunnion bar on the dumpster and the guide plate on the truck, and partially severed.",1
"An employee was carrying a pitcher with a heavy-duty caustic liquid cleaner (containing 50% sodium hydroxide) to a large drum. The liquid spilled onto his legs, causing third-degree chemical burns to his ankles/shins. He was hospitalized.",1
"A temporary employee was operating a powered industrial truck and went to dump garbage. After approximately 10 minutes, he was found on his back on the ground. He was hospitalized with skull, neck, and spine fractures.",1
An employee was moving hardwood cants when his right last finger was crushed between two cants.,1
"An employee was showing an apprentice how to lock down the metal to a cut-off saw machine when the machine was engaged as he was placing his right index finger on a slot. His finger was caught between the slot and the machine's chain, resulting in the amputation of his right index fingertip without bone loss.",0
"An employee was replacing the bearings on an icing station machine's belt as part of regular preventive maintenance when the shaft came off from the other side and tilted against the frame, catching the employee's thumb between the shaft and frame. The employee's left thumb was smashed, resulting in a partial amputation with bone loss.",1
"An employee was climbing down a ladder when it shifted to one side. The employee's hand came into contact with wires, which cut his right middle, ring, and little fingers.",1
"An employee was installing the bolt inside a tank's counterweight, which was held by a chain, when the chain suddenly broke. His left arm was then caught between the counterweight and the inner tank, resulting in a left arm amputation.",0
An employee was performing maintenance on an air bladder. The employee was connecting the air bladder when the conveyor started. The employee's arm became caught in the conveyor and the employee suffered a broken arm.,1
"A temporary employee was driving a tugger to retrieve a case of product when he stepped off the tugger and suffered a left leg laceration, requiring hospitalization. The tugger had not stopped moving at the time of the incident.",1
"An employee was changing the membrane for a reverse osmosis system when someone pushed the membrane into the tube. The employee's hand was then caught between the membrane and the tube, resulting in a right middle finger amputation.",0
An employee was attacked in the store by a person wielding a machete. The employee was stabbed several times and required hospitalization.,1
"An employee was fitting metal baskets together with an overhead gantry crane when his left ring finger was caught between baskets, severely lacerating the front and back of his left ring fingertip.",1
An employee was bitten by a dog belonging to a resident at a nursing care facility.,1
"An employee was preparing to unload the trailer on his tanker when his foot was caught in a tangled cable on the ground. He fell to the ground, breaking his right hip.",1
"An employee was helping a crew lift a welded steel beam that came apart and fell. The beam hit a metal pipe that then hit the employee's lower leg, fracturing and lacerating it.",1
"An employee was delivering mail when he felt faint. He went to his vehicle and had a hard time breathing. He was hospitalized with dehydration, dizziness and weakness from heat exposure.",1
An employee was cleaning using a hot water pressure washer. The safety switch on the pressure washer failed causing a release of steam that burned the employee's right arm near the elbow.,1
"An employee was installing solar rails on a building roof. The employee was shocked by electricity flowing from the line to the ground, suffering injuries. The employee was hospitalized.",1
"While reaching for a paper towel dispenser, an employee lost balance and fell to the floor, suffering a broken left hip. The employee was hospitalized.",1
An employee was using a cutoff wheel when the portable tool kicked back and the blade lacerated the employee's left thumb.,1
An employee was holding a 5-gallon bucket while its lid was being cut off with a bandsaw. The saw lacerated the employee's left wrist.,1
"While wiping store shelving, an employee fell from a ladder to the floor. The employee suffered a fractured left wrist, requiring surgery.",1
An assembly mechanic was reinstalling an aircraft wing when his fingers were crushed. He suffered a potential amputation of the right middle finger.,0
"An employee climbed up a ladder to reach an operator's platform to show the operator how to push buttons for a loader. As the employee was descending from the platform ladder, he twisted his body and suffered a lower back strain.",1
An employee started feeling ill during a trash pickup and threw up. The employee was hospitalized for dehydration and heat stress.,1
"An employee was applying grease by hand to holes that a 
hoist pin travels through when the pin engaged and pinched his left index fingertip, resulting in a fingertip amputation. The vehicle was running at the time.",0
"An employee spent the work day inspecting roofs in high temperatures. At the end of the day he felt exhausted, and was hospitalized for possible heat-related illness.",1
"An employee opened a radiator cap to add water to the radiator. Hot fluid sprayed out, burning his abdomen, an ear, and his hand. He was hospitalized.",1
"An employee was operating a turret truck that hit a piece of wood. While bending to retrieve the wood, he felt pain in his back. He was hospitalized.",1
"An employee was guiding a truck to a loading dock when the truck pinned him against the dock. He suffered two broken legs and a fractured pelvis, as well as possible knee injuries.",1
"An employee was standing in a workstation producing an industrial hose when his right index finger became caught in a wire roll, resulting in an amputation of his fingertip at the first knuckle.",0
"An employee was getting off a creeper, moving from lying to standing; the employee's knee twisted and the employee felt a pop. The employee had suffered a ruptured artery in the right knee/leg and was hospitalized the next day, undergoing surgery.",1
"An employee was performing home health care services in a resident's private home when the employee fell down a set of wet stairs and experienced internal bleeding, contusions, and a bruised spine, hip, and buttocks. The employee was hospitalized.",1
An employee was trying to move a 30-inch floor fan. The fan blade caught and amputated the employee's left middle fingertip.,0
"An employee was up on a ladder grabbing a rug off a shelf when the employee's hand slipped and the employee fell down the ladder to the ground, suffering a right ankle fracture.",1
"An employee fell into an excavation. The employee was in the excavation for about an hour and suffered dehydration, requiring hospitalization.",1
An employee was moving steel plates with an overhead crane when a piece slipped off the chain and struck the employee's foot/ankle.,1
An employee was lining up a 1-inch pipe when his finger entered the pipe as it was rolling and was lacerated.,1
"An employee was cutting grass on a low sloped area using a riding lawn mower. The mower slipped on wet grass, but did not overturn. The employee jumped off the mower and landed near the discharge chute. The mower blade caused a laceration to the employee's right hand and wrist.",1
"An employee was changing out the knife of a wood planer. After shutting down the machine, his hand entered it before the knife had completely stopped. As a result, his right hand had to be medically amputated to the wrist.",0
An employee was hospitalized with chest pain due to work-related stress.,1
"An employee was trying to remove a pin from a set of tracks using a hydraulic ram. The ram shifted and struck the employee in the abdomen, causing internal bleeding. The employee was hospitalized.",1
An employee was confronting a former employee in the parking lot when a physical altercation occurred and the employee suffered a head wound.,1
"An employee was operating a carton sealing machine when a box lid got hung up on the advancer conveyor and jammed. The employee reached over to correct the jam, and the employee's finger contacted the conveyor or rollers. The pad of the employee's left middle finger was amputated.",0
"An employee was installing a TPO membrane on the edge of a flat roof and as he was about to throw out some garbage, he slipped and fell 10 feet from the roof into the dumpster. He fractured his wrist and lacerated his right eyebrow, requiring hospitalization.",1
"An employee was rewiring a power line pole when the back of his right hand touched the 7,200-volt tap line. He suffered second-degree burns to his right hand and an exit wound on the left side of his torso.",1
An employee slipped and fell on a wet floor fracturing her right ankle. She was hospitalized.,1
An employee was cutting felt paper for a mold using a box cutter and amputated the left index fingertip.,0
"An employee was on a 12-foot step ladder getting ready to strap up a flexible conduit on a light fixture. When he grabbed the flexible conduit, he was shocked by ~277 volts and fell off the ladder to the ground, fracturing his L3 vertebra.",1
"An employee was setting up a machine when moving parts caught his thumb tip, resulting in a soft tissue amputation.",0
An employee was trying to remove a jam from a soup dispenser packaging line. The employee's right little finger was caught in the mechanism and the tip was amputated.,0
"An employee was pulling a 5-gallon glass water bottle out from a holder. The bottle shattered, lacerating the employee's right little finger and severing nerves and two arteries in his hand.",1
"An employee was attempting to retrieve a part from a press shop shear when the shear struck the employee's right hand, amputating four fingers.",1
"An employee was on the roof of a house, securing overhead electrical service to a mast. The mast failed and broke off from the attachment point, causing the employee to fall from the roof. The employee suffered a broken left femur and was hospitalized.",1
"An employee was placing a weight on top of a mold. The weight slipped off, striking the employee on the left foot. The employee then hit his head against the metal flask surrounding the mold. He suffered a crushing injury to the foot and a fracture to the forehead and sinus area, and was hospitalized.",1
"An employee slipped on water on the floor while walking in a commercial kitchen, fracturing an ankle and requiring hospitalization.",1
An employee was retrieving his tools when he suffered a right pinky fingertip injury that later resulted in an amputation.,0
An employee was cleaning a grout machine when his hand entered the machine. The paddles grabbed and dislocated his index finger. The machine was running at the time of the incident.,1
"An employee was trying to get a shrink-wrapped pallet out of a trailer, using the truck's lift gate and a pallet jack. He fell about 3 feet to the ground, landing on his back and injuring his back/shoulder/neck area. He suffered a possible fracture in his back.",1
"An employee was lighting a burn pile with gas when it exploded, causing second degree burns to his arms and legs.",1
"An employee was manually lifting a steel manhole cover when it fell on his left foot. He suffered a fracture of his left foot metatarsal bone, requiring hospitalization.",1
"A forklift operator picked up a hollow core so an employee could put dunnage underneath it. The hollow core was rigged with hooks when it broke and fell on the employee's thumbs, breaking and spraining both of them.",1
"An employee was removing doors from an oil and gas treater with an electric impact gun. His tool arced and lit the gas in the room on fire, causing severe burns to both of his arms.",1
An employee was using a small handheld grinder to grind drain grates when the grinder lacerated the back of the employee's right leg.,1
An employee was working on the brakes of a school bus using needle nose pliers. The plier slipped and impaled the employee's right eye.,1
"An employee was building an excavator bucket when the 130-pound bucket slid off the work bench and landed on his foot, amputating a portion of his right little toe.",0
An employee was helping to adjust the alignment of a pneumatic cutter. The employee's right index finger was pinched between the cutter's cylinder and a spacer block attachment amputating  two joints of the finger.,1
"An employee was replacing gaskets on a disc stack centrifuge and using a specialized tool to pull the disc stack when the employee's left ring finger was caught between the tool and the stack, resulting in a partial distal amputation of the left ring fingertip.",0
"At approximately 3:15 p.m. on 25 July 2018, an employee was cutting pipe with a saw when the saw lacerated his knee, requiring hospitalization.",1
An employee was cleaning paper donuts from a scrap conveyor when his hand contacted the underside of the conveyor and was caught in the moving part. He fractured his right radius.,1
An employee went into the produce cooler to load up stock. The employee was pulling stock off a rack that had previously been hit by a pallet or jack when the product rack fell and hit the employee. The employee suffered a sprained ankle.,1
An employee was using a push cart when her right pinky fingertip (5th digit) was pinched and smashed between the cart she was using and another cart in the area. Her fingertip had to be medically amputated.,0
"While backing up with a clothes rack, an employee fell to the floor, suffering a broken hip.",1
A worker was hospitalized due to electrical flash burns.,1
"An employee was aloft in an insulated bucket, freeing an unpowered secondary wire from a snag in a tree. His shoulder touched the primary wire above him, causing electricity to pass through his left arm and exit through his left hand. He sustained third degree burns to the left shoulder and had exit wounds on his thumb area and between his ring and middle fingers. Personal protective equipment was not being worn at the time of the incident.",1
"While counting money, an employee had an allergic reaction to an unknown substance, suffering tongue swelling.",1
"An employee was helping load interior/exterior doors into a van trailer. He jumped from the dock to the concrete less than 4 feet below, breaking his right leg in two places.",1
"An employee was driving from a pest control service location. Suffering from heat-related dehydration, the employee drove off the road and into a fence. The employee was also observed vomiting on the accident scene. He was hospitalized for dehydration and kidney failure.",1
"An employee was trying to clean built-up product from the sensor/photo eye of the conveyor on a weigh blend system, which was failing to start after being calibrated. The tray of the conveyor actuated, and the tray's reciprocating motion caught the employee's arm, fracturing the left humerus. The machine was not locked out at the time of the incident.",1
"An employee was operating a forklift when its forks hit a trench plate. The employee fell into the forklift's shield, suffering a head contusion and neck pain. The employee was hospitalized.",1
An employee was connecting a new battery to the floor machine when it sparked and caused a fire. The employee sustained an electric shock and burns to the right index finger and palm.,1
"After measuring a hot forging using calipers, an employee turned and was walking away when the forging came loose of the manipulator and hit the back of his left leg, fracturing his ankle and causing second degree burns on his leg.",1
"An employee was carrying a 5-gallon bucket filled with 3 gallons of a chemical containing 77 to 100 percent sulfuric acid, preparing to add it to an anodizing tank. He tripped and the acid splashed out of the bucket, burning his torso area.",1
An employee was trimming vegetable roots with a harvesting knife. The knife lacerated his finger.,1
"An employee was struck by an excavator bucket while backfilling a rock wall, suffering a back injury.",1
"An employee slipped and fell backwards while moving a couch, suffering a lumbar compression fracture.",1
An employee was using a cart to deliver bags of coins to a bank. The employee's fingertip was amputated between the cart handle and the ground.,0
An employee fell from a ladder and was hospitalized.,1
An employee was hospitalized after being bitten by a resident.,1
"An employee was installing electronic equipment on an electronics rack when the rack came loose from the wall and fell on the employee's head. The employee suffered bruising, abrasions, a nerve injury, head injuries, and vertebra injuries to the upper neck and back.",1
"An employee was attempting to unjam a piece of ash edging that was stuck between the belt and frame of an edging machine when the machine pulled employee's hand back into the frame, resulting in three finger amputations.",0
"An employee was removing items from a top stock ladder when the employee missed a step, lost balance, and fell off the top stock ladder, landing on the floor and suffering a right wrist fracture and elbow bruise.",1
"While helping with the load on a forklift, an employee tripped and fell. The forklift ran over the employee's left foot, breaking bones.",1
"On July 25, 2018, an employee was reaching around a tube to back a wax applicator out because it was applying too much wax when the employee's finger was caught between the wax applicator and the tube, resulting in a distal amputation to the right index fingertip. The equipment was unguarded at the time of the incident.",0
"An employee was plastering on the floor when he fell about 20 feet to the ground below, sustaining shoulder fissures. A safety railing was installed at the time of the incident.",1
An employee was going up in a bucket truck when he fell approximately 10 feet out of the bucket and injured his back/spinal cord.,1
"An employee was working from a step ladder to repair a hole on a shipping container. While climbing down the 8-foot step ladder to retrieve a new battery for the grinder, the ladder and the employee fell to the ground below. The employee sustained a concussion and fracture of the spine.",1
"An employee was working on an electric panel when an arc flash occurred, burning the employee on his face, arms, and torso.",1
"After cleaning a mixing machine that was locked out, an employee was going to remove the safety chain that held the sliding door in place when the chain broke and struck the employee's nose. The employee suffered a broken nose and an eye injury.",1
"An employee was operating a router when his hand slipped and his right index finger was caught in the router blade, resulting in a fingertip amputation.",1
An employee was working on a split saw bench when the bench came down on him. He suffered a broken shoulder and laceration. There was no block in place at the time of the incident.,1
An employee was performing concrete work when he fell in a hole that had a piece of rebar in it and was impaled. He suffered internal injuries.,1
An employee was moving boxes with a stock picker. The employee backed into a box in the aisleway and fractured his ankle.,1
"An employee was conducting landscape work when a moving automobile hit the employee, who suffered a broken neck, ribs, and skull.",1
"An employee was descending a ladder when it slipped, causing him to fall to the ground. He fractured his right ankle.",1
An employee became dehydrated due to heat stress while working.,1
"An employee was moving material in a cart when a part closed on the employee's finger, resulting in an amputation to a finger on the left hand.",1
"An employee was climbing down an extension ladder. The employee fell about 6 feet to the concrete floor, landing on their head and suffering an injury that required 16 stitches.",1
An employee was lowering a pump when his finger was caught between a block and cable. He suffered a right ring fingertip amputation.,0
"An employee was climbing a ladder to install gutter guards on a house. The employee fell 10 feet from the ladder to the ground, breaking his left ankle and right heel.",1
An employee was drawing meloxicam out of a bottle and poked her thumb with the needle. The employee woke up the next day and her hand was swollen. She was hospitalized for infection and surgery.,1
An employee was attempting to repair a string break on the head of a twisting machine when the machine's mandrel amputated the employee's right ring fingertip.,0
An employee entered a supply area and opened flaps. An open valve from a draining stack and bell emitted carbon monoxide vapors into the supply area; the employee suffered carbon monoxide poisoning and lost consciousness.,1
"An employee was performing maintenance on a service drop line from an extension ladder when the employee fell between 15 and 20 feet from the ladder to the ground, suffering fractured vertebrae and a punctured lung.",1
An employee was cleaning the tracks of a bulldozer when he fell to the pavement and suffered an intestinal injury. He was hospitalized.,1
"An employee was fabricating a shop aid out of aluminum sheet metal. While he was using a manual, foot-operated shear, his left ring fingertip was caught under a material clamp on the shear, resulting in a partial amputation.",0
"An employee tripped and fell to the floor, suffering a fractured hip.",1
An employee was pushing a money tray into a safe when his right middle finger was caught between the dummy door (which hid the money) and the bottom of the safe. The tip of his right middle finger was amputated. He was hospitalized.,0
"An employee was stepping off a forklift onto soft, wet soil and turned his ankle. The ankle fractured.",1
An employee was working in a building and suffered an allergic reaction to a chemical and was hospitalized.,1
"An employee was putting a piece of chicken on a hook to run through a cutter/saw machine. The machine caught his right hand, partially amputating his right index finger.",0
"An employee lost his footing on wet grass as a rear-loader truck (garbage truck) was drifting backwards. The tire of the truck ran over his right foot, causing a contusion and requiring hospitalization.",1
An employee was removing a wood scrap from a table saw when the saw blade caught his left hand. His left index and middle fingers were severed at the first knuckle. The safety guard was not in place at the time.,1
"An employee was attempting to get lifting straps underneath a 2,100-pound steel part when the part came off the straps and crushed two of his left-hand fingers.",1
"An employee tripped over a bag on the floor and fractured her hip, requiring hospitalization.",1
"While cutting away brush, an employee picked up a piece of brush that had a brush cutter attached to it. The blade cut his left hand.",1
"While an employee was feeding lumber into a saw, the employee's fingers were trapped between the wood and the feed chain and amputated.",1
An employee was using a hammer drill to drill a hole in a concrete floor when he struck a 480-volt electrical line. He suffered burns and bodily injuries in the resulting blast.,1
An employee fell from the rear of a trailer to the ground and suffered a broken leg.,1
"An employee was walking around the job site supervising the work activities of the other employees. A telescopic boom lift was lifting a piece of metal to an elevated location when the piece of metal fell from the boom lift and struck the injured employee in the head and upper torso areas. The employee suffered a head laceration and fractured collarbone, requiring hospitalization.",1
A floor scraper's blade cut the palm of an employee's right hand.,1
"An employee was preparing to work on a heavy roll press. He was setting down a 3-inch roll when his right index finger was caught between the roll and the cradle where the roll was going to be rested. He suffered an amputation to the tip of his right index finger, just above the nail bed.",0
"An employee was laying 4x4 dunnage on the ground to set cargo and felt light headed, had stomach cramps and blurred vision. The employee was hospitalized for heat stress.",1
An employee was unplugging a welder. The prongs of the plug arced to the breaker box and the employee was shocked.,1
"An employee was preparing to load a truck. As the truck backed up, it crushed the employee against the loading dock, injuring the employee's back.",1
An employee fell down a five-step staircase and broke his right leg in three places.,1
An employee was cutting plywood and the saw blade amputated the left pinky finger.,0
"An employee was moving a 700 lb. cylinder with an appropriate lifting device when the cylinder fell on him, causing chest and leg contusions. He was hospitalized.",1
"An employee was driving a stand-up forklift when his hand went between a rack and the forklift, crushing his finger.",1
An employee's right hand was caught in the point of operation of a CNC tube bender. The employee suffered amputations to the right ring and little fingers.,0
"On 07/26/2018, at approximately 12:00 PM, an employee was standing on a rock during his lunch break when he fell off and broke his right leg, requiring hospitalization.",1
"On July 26, 2018, an employee was preparing a truck for loading by moving straps off the deck. The employee fell from the deck to the ground, suffering broken ribs.",1
An employee was cleaning the front foot separator saw when their foot was caught in the pull chain causing an open fracture and amputation of his right lower leg.,1
"An employee tripped and fell to the same level while walking to the facility from getting the mail, suffering a broken hip that required hospitalization.",1
An employee was pulling a 2-inch hose on a concrete walkway when he tripped on a parked forklift fork. He fractured his right hip and was hospitalized.,1
A pickup truck rolled and pinched an employee between it and an oil truck. The employee was hospitalized with injuries to the lower extremities.,1
"An employee was working atop a 7-foot-high refrigerator case, spackling a sheet rock column. He was about to climb down when he tripped on debris and fell to the concrete floor, suffering severe injuries including six broken vertebrae and two broken collarbones. He was hospitalized.",1
"At 7:30 a.m., an employee began work with an asphalt crack sealing team. At 2:30 p.m., he had begun to suffer severe leg cramps due to heat and dehydration. He was hospitalized.",1
"An employee was removing a breader's main drive belt motor from its gearbox. When the motor released from the gear box, it fell, crushing the employee's left ring fingertip between the bottom of the motor and the framework of the breader. The finger tip was subsequently medically amputated.",0
"An employee was placing a weighted mold onto a molding machine when the mold became stuck on a bolt. As the employee attempted to push the mold off the bolt, it crushed and lacerated the employee's left middle finger.",1
An employee was using a table saw to cut molding. His hand slipped and the saw blade partially amputated a finger.,0
"An employee was cleaning a mixer with a hammer. The hammer bounced back, hitting him in the face and fracturing bones beneath his eye. He was hospitalized.",1
"An employee fell into a sump of boiling water, suffering second degree burns from the waist down.",1
"An employee was changing out the anode on a treater shack when the anode, which was under pressure, struck the employee's waist. The employee's torso twisted and the employee sustained a broken leg. The wrong line on the treater shack was locked out at the time of the incident.",1
"An employee was transiting between units within the hospital when the employee slipped on a wet floor and fell to the ground, fracturing the left patella and requiring hospitalization.",1
"On July 27, 2018, a lineman fell while guiding a steel tower foundation leg in place. His thumb was caught in a pinch point in the tower frame, suffering a fracture.",1
"
An employee was trying to grind corn using a table grinder. The grinder's jar came off; while the employee tried to reconnect it to the base, the grinder lacerated her right middle and ring fingers. The grinder was running at the time.",1
"An employee was helping two dock workers to upright a power jack that had overturned.  While uprighting the jack, his middle fingertip was amputated and required stitches.",0
An employee had closed a plug valve halfway with a valve bar when he immediately felt a sharp pain in his lower back due to bulging discs that caused a pinched nerve.,1
"An employee was attempting to pull a 12"" die when a synthetic web sling that was being hoisted by an overhead crane slid unexpectedly back down the shaft of the die, catching an employee's left thumb between the sling and the die. The employee's left thumb was amputated.",0
"On July 27, 2018, an employee was working from an elevated basket platform. The platform lowered and contacted the item she was working on. Her thumb was pinched between the basket and the item, resulting in a partial amputation.",0
"While signaling a crane operator, an employee fell through an opening and landed on the floor of a container ship, about 25 feet below. He suffered fractures in his leg, hip, ribs, and right arm.",1
"An employee was leaving a mobile scaffold platform while holding a tower section that had just been unbolted. The employee and the tower section fell to the ground about 3 feet below, landing on an outrigger and suffering four broken ribs and blood in the lungs.",1
"An employee was draining an oil hose when the hose broke and a spill occurred. He took a step and slipped, falling on and breaking his hip. He was hospitalized and had surgery.",1
An employee was working on a elevated machine platform and fell off onto the ground. The employee sustained a head injury.,1
"An employee was using a pneumatic nail gun to nail 2x8 boards together when his right leg bumped the nail gun. The gun then discharged a nail into his right leg, striking his bone.",1
"An employee was drying a pump outlet pipe with a towel. The pump's turning blades caught the employee's finger, amputating it to the first joint.",0
"An employee was pushing a board through a manual chop saw, controlled by a foot pedal. As he was adjusting the board, the saw blade amputated his left index finger. The saw was guarded at the time.",1
"An employee was using a circular saw to cut expansion board material when his right index finger contacted the saw blade, resulting in a fingertip amputation at the bottom of his fingernail.",1
"An employee fell from a roof to the ground and sustained a head injury, broken ribs and a punctured lung.",1
"Two employees were sliding a metal grate along a stationary floor. One employee's left middle fingertip was pinched between the sliding grate and another grate, suffering a fingertip amputation.",0
"While replacing a fluorescent two-by-four light fixture with an LED fixture, an employee was shocked and fell off a 6-foot ladder (likely from the third rung) to the ground.",1
An employee was operating a pallet jack and maneuvering it to park in the battery charging area when the pallet jack struck a pipe. The sudden stop caused the employee to fall from the lift to the concrete floor and fracture a hip.,1
"An employee was on an orchard ladder approximately 10 feet above ground level, using an 8-foot long pole to prune tree branches, when he lost his balance and fell to the ground. He suffered rib and pelvic injuries.",1
An employee's left hand was crushed by the hydraulic clamp on a drilling machine.,1
"On July 27, 2018, a police officer collapsed due to heat-related dehydration while taking a firearms training course. The officer was hospitalized.",1
"An employee tripped and fell down and a road grader hit him, breaking his pelvis.",1
"After prepping a patient's blood sample, an employee was walking toward the waiting room to call another patient when she fell on the floor and could not get up. She was hospitalized with a shoulder injury.",1
An employee was working on a roof above the ceiling pulling cables when his hands were burned on a hot pipe. He then fell and broke some bones and was in serious condition.,1
An employee went over a fence and struck his head against the ground. He was hospitalized.,1
"After being sprayed with brake cleaner, an employee suffered second-degree burns when the cleaner was ignited with a lighter.",1
"An employee fell down stairs, breaking her ankle. She was hospitalized.",1
An employee was working in the pit pulling impurities in the trough while facing backwards. The molten metal splashed and burned the employee's left leg. The employee received first and second degree burns to the thigh and calf areas.,1
"On July 28, 2018, a concrete truck driver was climbing the ladder attached to his truck when he fell to the ground, breaking his ribs. He was hospitalized.",1
"At about 8:30 a.m. on July 28, 2018, an employee was trapped by the boom of a skid steer while trying to help another employee change the skid steer's forks. The employee suffered eight broken ribs and was hospitalized.",1
An employee was operating a pasta machine when it amputated his right index fingertip.,0
An employee was washing a spray dryer unit. The rotary valve caused the amputation of the employee's index and middle fingertips.,1
An employee was forming aluminum sheets in a press brake when he suffered the amputation of the tip of the fingernail and skin on right index finger.,0
"An employee was undertaking a washout task on a skid when a hydrocarbon release was ignited by an unknown source. A flash fire burned the employee's lower back, face, neck, and hands. The employee was hospitalized.",1
"An employee was descending from one deck level to another in a ship. The employee slipped and fell about 4 feet to the bottom of the stairwell. The employee suffered a broken right tibia and fibula, as well as a small cut under the left eye and a contusion to the right lower back.",1
"An employee was struck by a roof truss, suffering head injuries. The employee was hospitalized.",1
"On July 28, 2018, an employee was in a tree trying to rescue an injured eagle. The employee slipped and a large branch struck her shin, fracturing her tibia and fibula. She was hospitalized, undergoing surgery.",1
An employee was stocking produce in a store's cooler when someone stabbed her in the back. She suffered a laceration/puncture wound and was hospitalized.,1
"An employee slipped on a wet hallway floor and fell, fracturing her knee. She was hospitalized.",1
An employee was working from an order picker at about four feet high. She fell off the order picker and broke several ribs.,1
"An employee was leaving a top bunk. As he swung his legs over the edge of the bunk, the fitted sheet caught his leg and he fell, striking his right knee on the tile floor. He suffered a spiral fracture of the distal femur.",1
"An employee was walking backwards, helping carry a section of perforating gun string to the gun stands on the ground. He tripped over a stand, falling backwards to the ground. The gun string came down on his right hand, breaking and lacerating his right ring and little fingers. He was hospitalized.",1
"An employee was installing a motor when it shifted, causing an amputation to the employee's left middle fingertip.",0
An electrician was working on electrical equipment in the motor room when he was shocked and burned on his hands. He was hospitalized.,1
An employee cleaned a shower area with a multipurpose spray cleaner. She experienced breathing problems once she got home and was hospitalized.,1
An employee was unplugging a welding machine when he was shocked. He was hospitalized.,1
An employee was conducting an inspection of a warehouse under construction. She opened a door that does not have a landing and fell approximately four feet through it. The employee sustained a left wrist fracture.,1
An employee was involved in an altercation with a shoplifter and sustained a broken left arm and a laceration to the eye.,1
"While working at a maintenance workbench, an employee was struck from behind by an unattended golf cart. The employee suffered a contusion and left leg injury.",1
"While walking, an employee tripped and fell to the floor. The employee suffered a broken elbow and was hospitalized.",1
"An employee was removing leftover material from the bed of a flatbed truck. He tripped on dunnage and fell off the flatbed, landing on and injuring his right elbow. He was hospitalized.",1
"An employee was climbing down an extension ladder when it unlocked and slid down. The employee fell, breaking his ankle and leg.",1
"An employee was operating a micro welder. The welding die clamped down on the wire, breaking the employee's left index finger.",1
"An employee climbed out of a pool and slipped on the pool's smooth plastic edge. She struck her left hip on the side of the pool, suffering a contusion.",1
"An employee was retrieving his radio from a sewage grinding pit when the grinder crushed the tip of his little finger, causing an amputation.",0
"An employee was working from an extension ladder, about 16 feet high, to check an air conditioning vent. The ladder slipped and he fell to the ground, breaking ribs and his right arm, suffering kidney and lung contusions, and striking his head.",1
"An employee had just picked up a teller tape that had fallen to the floor. Her head struck a countertop, causing a concussion.",1
"An employee was using a broom to sweep debris from the floor in a receiving area. While he was moving a fan out of the way, the fan blade amputated his right ring fingertip and cut his right middle finger.",1
An employee was clearing a jam in the wrapping machine and suffered an amputation injury.,1
"An employee was climbing on a skid steer when his right foot slipped and was pinched in the vehicle. The foot was broken, requiring surgery.",1
An employee was cutting open 50 lbs. bags of solids and emptying them into a screener with the use of a lift table and vacuum lift. The employee was hospitalized that evening for surgery to correct a hernia.,1
"With a storm approaching, an employee was trying to secure an A-frame rack with parts on it. The wind blew a nearby metal shed toward the rack; the shed's door swung into the rack, pushing it into the employee's legs and causing a compound fracture of the right leg.",1
An employee was shocked while using a vacuum cleaner. He was hospitalized.,1
"An employee was completing final tasks for the day, including putting up handheld equipment used for order processing, when he collapsed in a warehouse. He was hospitalized, suffering from possible heat-related illness.",1
"An employee was using a 3,000-psi hose attached to the side of his vacuum truck. Water from the hose struck and lacerated his hand.",1
"While installing a piece of ridge cap on a roof, an employee fell to the ground about 28 feet below. The employee suffered a dislocated right shoulder, a broken left wrist and left leg, and facial lacerations.",1
"An employee was trying to remove carbon fiber wrap in a washing area. He placed his hand on the fiber to cut it, and it became trapped in the fiber. When he pulled his left index finger out of the fiber, the fingertip was amputated.",1
"On July 30, 2018, an employee was delivering mail when a dog bit him on the left calf.",1
"An employee fell 28 feet while laying metal decking, suffering broken bones in the face, knee, and foot.",1
"An employee was shoveling hot asphalt mix inside the box of a truck. The back vertical gate opened partially and the employee fell through, coming into contact with the hot material. The employee suffered severe burns to the stomach, palms, and wrists (requiring skin grafts), as well as possible nerve damage to the right forearm.",1
"While tagging palletized inventory, an employee tripped over a pallet and suffered a broken right hip. The employee was hospitalized for surgery.",1
"After finishing a delivery, an employee began experiencing dizziness, shortness of breath, sweating, and a racing heart, possibly heat-related.",1
"On July 30, 2018, an employee was behind her forklift when another forklift backed up into her, pinching her between both lifts. She suffered a broken left hip and was hospitalized.",1
"An employee was pushing a waste bin across the floor and tripped, suffering an injury to his left knee.",1
"An employee was standing on the bed of a flatbed trailer, banging on the drum of a concrete mixer while it was being washed. He fell to the ground 5 or 6 feet below, breaking his tibia and fibula.",1
"An employee was rolling a 4-yard trash container into a trash room on casters. The employee's right ring finger was pinched and crushed between the container and a wall, causing a compound fracture. The employee was hospitalized.",1
"An employee was using an air stapler to staple bands on pallets. He tripped on the stapler's air hose and fell to the ground, fracturing his left femur.",1
"An employee was preparing to move an 8-foot piece of piling from a 6-foot by 6-foot metal box. While the employee was partly inside the box, some welds holding the box together failed and the box partially collapsed. The employee suffered lacerations and fractures.",1
"An employee was in a scissor lift, helping rig iron beams to be removed as part of concrete form work. A beam struck the scissor lift, knocking it to the ground with the employee inside it. The employee suffered injuries including an injured spleen.",1
"An employee was standing at a press brake machine, getting ready to bend a metal piece. The machine was activated while his right index finger was on the feeder; the eave drip die came down, resulting in the amputation of his right index finger below the knuckle.",1
"An employee had placed one foot on a pallet, about 3 inches above the floor, to retrieve banded cardboard. When the employee turned and stepped down, they twisted and broke their ankle. The employee was hospitalized, requiring pins in their ankle. Low-cut shoes, not boots, were being worn at the time of the incident.",1
"An employee was using a shearer, which cut off the tip of his finger at the first joint.",0
An employee was cutting a piece of 4-by-4 lumber with a handheld circular saw. The saw amputated the tip of his left index finger.,0
"On July 30, 2018, an employee was cleaning an oven in an apartment. The employee began experiencing asthma symptoms and was hospitalized.",1
"An employee fell to the floor while climbing down a ladder, suffering a broken femur.",1
"An employee was scrubbing a cow, preparing it to be milked. It kicked her in the face, cutting her above the left eye and loosening teeth.",1
"The governor on a portable welder had been replaced. While an employee was checking the wiring behind the governor, a coolant fan blade broke his left index finger and caused tendon damage and lacerations on the other fingers.",1
"A temporary employee (from Hughes Agency) was using an overhead crane to lift skids for a fuel tank. The rigging slipped, causing the metal frame to tip over onto the employee. The employee sustained a fracture to the left lower leg and was hospitalized after surgery.",1
An employee was installing a control box outside in the shade and started feeling lightheaded. The employee later passed out. He was hospitalized for dehydration.,1
"An employee fell when a rail broke, landing on the asphalt ground. The employee suffered fractures and was hospitalized.",1
An employee was installing a concrete chute extension when his left ring finger was caught between the fold-over chute and the extension chute. He suffered an avulsion of the pad of the finger.,1
"An employee was climbing an extension ladder to install gutters 21 feet above the ground. The employee fell at the fourth rung from the top, landing on the ground. The employee suffered broken ribs, vertebrae, and sternum.",1
"On July 30, 2018, an employee detailed the inside of a vehicle using heavy-duty carpet cleaner. Two or three hours later, he began to suffer respiratory distress and was hospitalized.",1
An employee was stocking clothing when a piece of clothing fell from a hanger to the floor. The employee slipped on it and broke her right ankle.,1
"An employee was placing a sheet of decking on metal roof rafters. While trying to adjust the roof sheeting, he slipped and fell 30 feet, suffering a head laceration from a metal sheet.",1
An employee was putting bases on bowling pins. His left index finger was caught and the fingertip was amputated.,0
"On 7/31/2018, at 1:00 AM, an employee was inspecting an auto-pour machine shuttle that was not operating normally. He was bent over with his hand on the rail of the shuttle when the equipment unexpectedly engaged. The shuttle's front roller then amputated his left pinky finger.",0
"An employee was grabbing and stacking tires when his face became red; suffering cardiac arrest, he collapsed and struck his head.",1
"An employee was walking up a customer's indoor stairs, slipped, and fell landing on his tailbone. He fractured a vertebra in his lower back.",1
An employee was attaching the blade attachment to a mini excavator. His finger was caught between the rack and the attachment resulting in a fingertip amputation.,0
An employee was assisting with a cable/winch line for a crane. His foot entered an access panel on the crane boom/jib and was amputated.,0
"An employee was being lifted by a forklift to place plastic sheets on a greenhouse. The forklift slipped, and the employee was caught between it and a piece of the greenhouse.",1
"An employee was working on the bed of a truck, moving a drum and then repositioning a pallet jack to be unloaded for charging overnight. The lift gate had been lowered; as the employee walked backward to move the pallet jack, he fell off the end of the truck to the concrete driveway about 3 feet below. He broke his right elbow in five places, also suffering a broken shoulder.",1
An employee fell 3 feet from an auto frame machine resulting in a head injury.,1
"A piece of cable came loose from a crane, amputating part of an employee's foot.",0
"An employee was delivering a manlift from a trailer. The manlift's wheels came off the trailer and the employee was ejected from it, falling to the ground and suffering several broken ribs and a concussion. The employee was hospitalized.",1
An employee was cleaning a 40-pound grate when it fell onto his right hand and fractured it.,1
"An employee was climbing a fixed ladder to reach a platform. The employee fell, landing on the concrete below and suffering a broken leg.",1
"An employee was setting material in a cutoff saw. The clamp to hold the material in place closed, pinching the employee's left little finger against the material. His fingertip was amputated.",0
"An employee was attempting to drive a forklift onto a flatbed trailer when the forklift tires fell off the side of the trailer. The employee then fell or was thrown from the forklift, suffering broken ribs, a broken collarbone, and lacerations to the face.",1
"An employee lifted the lid to the glue cooling area of the machine to examine the equipment for issues. The lid covers two pulleys; one is 4 feet and the other is 16 inches in diameter. When he lifted the lid, it swung back and he raised his left hand to protect himself. He then lost balance and tried to steady himself with his right hand by placing it on the belt. His right hand got caught in the pulleys and when he pulled back, he suffered avulsions to his ring, pinky and middle fingers requiring hospitalization.",1
An employee had just installed a telecommunication cable and was climbing down a ladder when he began to feel light headed and dizzy. He was hospitalized for heat stroke symptoms.,1
An employee was using a utility knife to cut corrugated cardboard. The knife cut off the tip of the employee's left middle finger.,0
Two temporary employees were feeding sheets into a roller mill and one employee's right hand was caught in the mill. He suffered a dorsal avulsion and fracture to the right hand.,1
"An employee was in a break room when a spare lithium ion flashlight battery in his pocket reacted with spare change and ignited. He suffered burns to his left thigh, both hands, and his fingers. He was hospitalized.",1
"An employee had her right hand in a bird carcass, cutting it with a bone saw, when the saw amputated the tip of her index finger and the first digit of her middle finger. She was wearing a wire mesh glove at the time of the incident.",1
"An employee was talking on the phone when he felt something crawling on his arm. He noticed a black spider, was bitten, and within minutes began to exhibit signs consistent with a black widow spider bite.",1
"An employee was standing on the drum of an oil rig washing and removing grease from the drum when the operator activated the drum. The employee then fell between the drum and cable, fracturing his right femur.",1
"An employee was cutting hay when the cultivator jammed with weeds. The employee got off the cultivator to remove the weeds. As the employee was removing weeds from the implement, the cultivator moved forward and pinned him, causing contusions to his leg and torso. It was turned on at the time of the accident.",1
An employee was installing a drip edge along the roof eave and fell striking an air conditioner during the fall to the ground. The employee was hospitalized for back fractures.,1
An employee was cleaning a vessel (VAT). The pump lid was not fully allowing hot water to escape the opening and burned the employee's left arm and back.,1
"An employee was walking inside the office area on carpeted floor when she tripped and fell to the floor, suffering a fractured left shoulder and a hairline fracture of the L4 vertebra. She was hospitalized.",1
An employee was pulling up the dock leveler to unload equipment from a truck when their middle finger was caught between the hole of the leveler and the dock amputating the fingertip.,0
"An employee was riding in a trailer being pulled by a tractor. As the tractor turned, the employee was thrown from the trailer and broke an ankle.",1
"An employee was climbing down a 6-foot step ladder when he lost his footing at the third rung. His leg was hung up in the ladder and he fell to the ground, breaking his left leg and/or ankle.",1
"An employee was cutting the ends off boards with a circular saw. After cutting the board, he slid it back with his hand and his left middle finger was caught between the board and a chain, resulting in a possible partial fingertip amputation.",0
"While working on a cope machine, and employee suffered crushing injuries between a mold and a rail system.",1
"Two employees were adding magnesium powder into an industrial mixer. An explosion occurred in the mixer, causing a small fire and smoke; one employee suffered burns to the face, hands, and wrists.",1
An employee was working near a junction box when his foot was caught in the corner of the 2x3 junction box. He fell down approximately 1.5 feet and broke his hip.,1
An employee was in a bucket trimming the branch of a cherry tree when an adjacent ash tree fell and struck the employee. The employee was hospitalized with C6 and C7 vertebrae fractures and a bruised spine.,1
"An employee stepped from a man basket onto a roof that was being demolished. The roof collapsed and the employee fell 10 feet to the ground, breaking an arm and several ribs. Fall protection was not being worn at the time of the incident.",1
"An employee was moving material onto a pallet lift jack. The jack was moved as he was walking backward and he fell to the ground, fracturing a vertebra in his lower back. He was hospitalized.",1
"At about 11:30 p.m. on July 31, 2018, an employee was working on an air valve actuator when the plunger came down, amputating the tip of the employee's right middle finger.",0
"An employee was standing on a loading dock ramp when the wind caught a transport door, blowing it into the ramp. The employee was knocked from the ramp, landing on the concrete parking lot and suffering a cut to the back of his head. The cut required scalp staples.",1
"An employee was cutting wooden crates using a powered saw when the saw slipped and contacted his right leg, causing a laceration.",1
"An employee was washing out a cement mixer when he noticed a rock in the hopper that was interfering with proper operation. While he was removing it, the blade on the auger caused the partial amputation of his right middle fingertip. The mixer was not locked out at the time of the incident.",1
"An employee was loading a truck with framed windows when a window struck the employee's left arm, causing a fracture that required surgery and hospitalization.",1
An employee was making a connection when a heavy pipe got away from the employee and caught the employee's left forearm between it and a board.,1
An employee was performing maintenance at a cell site when a bug landed on the employee's chin and stung him. He went to his vehicle and observed that the bite started to swell. He was hospitalized.,1
"An employee was working on a de-energized conveyor when the weight of a bearing slid down on top of one of his left-hand fingers, fracturing it.",1
"An employee fell to the ground while decking a building, suffering a head laceration and damaged ribs.",1
"An employee received a 5 milliamp shock to the left arm during an equipment test procedure, requiring hospitalization.",1
"An employee was hit by a falling sheave from a tester that was being placed in a well. The employee was struck in the chest below the collarbone, suffering a liver laceration and bruised lung.",1
"An employee was moving a granite piece when it fell on his left leg and broke his knee, requiring hospitalization.",1
"An employee was cleaning the magnet on a machine's belt when the machine was activated. His hand was then caught in the machine, resulting in his right arm being severed at the shoulder. He was hospitalized.",1
An employee was placing 33-inch bolts of wood into a three-head trim saw with two blades in operation. The employee reached into the saw to adjust a crooked bolt; the saw severed his left index and middle fingers at the middle joint.,0
"An employee was sitting at her post in or near a school gymnasium while the floor was being stripped and waxed. Vapors emitted from the process aggravated her asthma, requiring hospitalization.",1
"An employee was welding a metal plate to the top of a stand. The plate fell onto his finger, injuring it, and he was hospitalized.",1
An employee was on the back of a truck when it started to pull forward. The employee jumped off and landed hard resulting in a fractured right leg.,1
"A discharge hose failed, striking an employee and causing a laceration and fracture of the right tibia. The employee was hospitalized.",1
"A ready mix truck rolled backward, pinning an employee's right leg between it and the metal pipe of a pumping truck. The employee's leg was broken.",1
"An employee was going up a step ladder to trim a hitch when he lost his balance, fell to some bricks below, and landed on his right wrist. His right wrist broke and required hospitalization.",1
"An employee was working at the cashier station, tripped on a box fan and fell onto the ground fracturing a hip.",1
An employee was feeding a steel coil into a press. The material buckled; the employee was trying to free it with his right hand when it moved forward and pulled the hand in. His right index finger was caught and the tip was amputated.,1
"An employee was on a step ladder working on a shaft drive for a cooling bed when he missed a step while coming down, falling backward and hitting his head on equipment or the ground. The injury required stitches.",1
"An employee was cleaning a lab when he attempted to grab what he thought was an empty black container. The container had hot asphalt in it and caused the employee to jerk back. As he jerked back, the hot asphalt dripped down his left hand, causing second degree burns to his fingers and palm.",1
"An employee was removing a transmission from a diesel truck. He had a jack positioned underneath the transmission. After removing the top two bolts, he proceeded to remove the bottom bolts when the thread came loose from the transmission. The transmission displaced the jack and the transmission fell on the employee, breaking 10 of his ribs.",1
"An employee was pouring concrete cement on the ground when it got into his boot, causing second-degree burns to both his legs.",1
"An employee was climbing down the ladder of a front-end loader when he slipped on the bottom rung and rolled his foot, falling from the ladder to the ground and fracturing his right ankle.",1
"An employee was trying to repair a stalled recycle asphalt bin machine. His right arm got stuck between the tail pulley shaft and the pulley, and he suffered broken bones.",1
"An employee was dumping a 50-pound bag of solid particulate into a dump station. The employee's left hand contacted a butterfly valve in the bottom of the station. The valve was activated, and the employee's middle and ring fingers were amputated below the fingernail. The valve was not guarded with a screen.",0
"An employee was attempting to exit a tractor when it rolled over the employee's right leg, fracturing it in two places. The tractor's motor was running and the brake was not set at the time of the incident.",1
"An employee was crossing a conveyor belt when it was started. The employee fell, breaking her left leg.",1
"An employee was using a belt sander to sand down a sharp edge from a piece of metal he had just cut. The belt caught a piece of the sharp steel, causing the employee to move forward. He was wearing leather gloves while sanding and as the metal was pulled in between the rest plate and sanding belt, it caught the glove, pulling his left thumb in between the metal piece and sanding belt. His left thumb was amputated.",0
"An employee was repositioning a tank turret that was suspended from a crane when the turret shifted, pinching the employee's fingers between the turret and the loading chains. The employee's right middle and index fingertips were amputated.",0
An employee was performing maneuvers and felt faint. The employee was hospitalized for heat stroke.,1
"On August 1, 2018, a mail carrier began to feel faint. He was hospitalized for dehydration and heat stress.",1
"On August 1, 2018, an employee was using a small hoist to lift a mold. The employee was using the left hand to stabilize the mold during the lift when a movable component on the mold unexpectedly shifted and trapped the employee's finger, resulting in an amputation of the left little finger above the first knuckle.",0
"While using a trimmer to cut hedges, an employee suffered a partial amputation to the middle finger on his right hand.",1
"An employee was raising a lift gate on the back of a box truck. Her right wrist was caught between the control box and the gate's side rail, suffering an open fracture.",1
An employee was operating a rivet gun when the end of the rivet flew up and broke a fluorescent light bulb. Broken glass from the bulb fell on and lacerated the employee's left arm.,1
A temporary employee was operating a power press used to stamp metal parts. The die actuated while his hand was in the point of operation; his fingers were crushed and the index and middle fingers on his right hand were amputated.,0
An employee was climbing poles and attaching cables. One of the throw lines got caught in a tree. The employee climbed the tree and fell breaking an ankle.,1
"An employee was placing a broken concrete piece under a concrete slab as support when the slab broke and came down on/pinned the employee's right hand, cutting it and requiring stitches.",1
"An employee was watching as equipment ripped curbing from the side of a roadway when a piece of the curbing became lodged between the middle blade and the wheel of the curb removal equipment. When the wheel was turned, the piece of asphalt was ejected and struck the employee's chest, breaking ribs.",1
An employee was walking away from a pipeline when it exploded. He suffered second-degree burns.,1
An employee was hospitalized after sustaining a forklift injury.,1
"When rounding a corner in a hallway, an employee made contact with another employee and then fell to the floor. She suffered a hairline fracture to both hips, requiring surgery.",1
"An employee was using a forklift to unload a piece of steel pipe off a flatbed truck. The pipe fell off of the forklift and rolled onto the right leg of the injured employee, breaking it.",1
"An employee was operating a crane with a sling to lift a cylinder from a basket when the employee's left ring finger was caught between the sling and the cylinder, crushing it and resulting in an amputation to the first joint.",1
"An employee was climbing down a 6-foot step ladder after opening a damper on a trailer-mounted rental chiller when the ladder tipped and he fell to the ground, fracturing his left ankle and right toe.",1
"A temporary employee was placing baking racks into a row when a cart hit her from behind and caused her to fall, fracturing her femur.",1
"Three employees were aligning a pump motor when it became engaged and broke the tool they were using. The broken tool struck the employees, and one of them suffered an amputation to his left pinky finger.",1
"An employee was adjusting the throttle controls on a high-pressure water pump when a hose on the equipment ruptured. Pressurized water came out and contacted his right wrist, causing a deep laceration.",1
"An employee was cleaning materials from a table saw when his left hand made contact with the table saw blade, resulting in an amputation to part of his finger. The table saw was operating at the time of the incident.",0
"An employee was assembling a flex wing with a coworker. They had to line up three holes and place pins in them to secure the alignment. The injured employee's finger was in the center hole lining up the hole for the pin when the coworker moved the assembly, pinching the employee's right middle finger and resulting in a fingertip amputation.",0
"A temporary employee was on a ladder attempting to work with an electrical wire after placing a light in a ceiling grid when he fell to the ground, suffering a sore back. He may have been exposed to electricity.",1
An employee was maneuvering an aerial lift when he was caught between two aerial lifts.,1
"An employee was cutting a piece of steel. The saw blade caught the employee's right thumb, causing a partial amputation.",0
"While operating a machine, a circular enclosure degloved one-third of the employee's left middle finger resulting in an amputation.",0
"An employee was exiting a forklift when a pallet on the ground caught the employee's foot. The employee fell to the floor, suffering a broken left hip.",1
"An employee was working at the back of a bottle-making machine, adjusting one of its parameters. His hand was caught between the arm and frame of the machine, and his left ring finger was amputated at the first joint.",0
"An employee tripped over a long-handled squeegee and fell to the floor, tearing her rotator cuff.",1
An employee slipped off a ladder and fell to the ground sustaining a severe head injury.,1
"An employee was carrying a tray of glasses when she slipped on a wet floor and fell, cutting her thumb on a glass. Her thumb sustained ligament damage, requiring surgery.",1
"An employee was trying to replace a conveyor line roller that had popped out. As he was trying to replace the roller, with the line momentarily shut down, his finger was caught between the roller and the belt. He suffered a partial amputation of the right ring finger, about halfway down the nail.",0
"An employee unloaded a broom tractor from a trailer. He then got off the tractor to check the hub locks on the wheels. When he moved the hub locks, the boom tractor grabbed his leg and took off with him underneath. The tractor then made a 360 circle and ran him over a second time, breaking his pelvis in two places. He was hospitalized and required surgery. The boom tractor was in operation at the time of the incident.",1
"An employee was guiding a dozer back to tie it to a stuck vehicle. When the dozer stopped, the employee stepped between the vehicles to tie them together. The dozer then moved and caught the employee between the vehicles. The employee suffered a broken pelvis.",1
"While walking through a recreation room, an employee slipped and fell to the floor, suffering a broken hip.",1
"An employee was standing in the back of a semi trailer, which was being loaded from an outside loading dock. The truck (and trailer) pulled away from the dock and the employee fell to the concrete below, suffering a fractured right ankle.",1
"An employee was cleaning a milling machine when the employee's glove was caught in the rollers, resulting in a pinky fingertip amputation.",0
"An employee was operating a CIP system when he realized a hose was not connected properly. As he disconnected the hose, his lower body was splashed with 170-degree F fluid. He was hospitalized with burns to his lower body.",1
"An employee was disconnecting a pressurized hose from a truck when the hose popped off, causing the employee to fall backward on his left side. He broke his pelvic bone and was hospitalized.",1
"An employee was spotting a forklift, which was moving three sections of structural pipe. The third section shifted and began to roll; as the employee tried to stop it, his right ring finger was fractured and his little finger was partially amputated to the first joint.",0
An employee was trying to install a new industrial burn-out oven. He climbed on top of a section of the oven and was using a pry bar to pry another section of the oven out when the pry bar slipped and he fell approximately 12.5 feet to the ground. He broke his nose and both wrists and suffered a cut above the eye.,1
An employee was inspecting equipment when a sweeper belt/pulley caught her right little finger. Part of the first digit was amputated.,0
"An employee was on a tractor bucket, being lowered into a trench that was being excavated. He slipped and was struck by the thumb of the excavator, suffering puncture wounds to both feet.",1
"While walking to her office, an employee slipped on water that had been spilled when a dehumidifier was moved. She fell to the floor, sustaining a fracture to the right shoulder that required surgery.",1
"An employee was attempting to remove a blemish that developed on the press plate of a sheet-fed press machine when his right index finger was caught in a roller, resulting in an amputation to the top portion of his finger.",1
"An employee was cleaning a filter press, which included removing hot oil and earth material from the filter, when the hot oil spilled on and burned his upper body, shoulders, triceps, and face.",1
"An employee was setting trusses in a residential construction when he lost his balance and fell approximately 16 feet to the next lower level, suffering fractured ribs.",1
"On 08/03/2018, an employee fell off a baker's scaffold while installing ceiling tiles, injuring his upper left leg and requiring hospitalization for surgery.",1
"An employee was using a steel rod to break up sugar lumps in a silo when the rod was pulled in by the silo's screw conveyor and the employee's right hand was caught in the rod handle, amputating the right pinky, ring, and middle fingers.",0
"An employee was setting up a rolling mill. Once he properly sized the wire, he went to cut the nonconforming wire off. At this point, the machine was stopped and he released the tension. He held the loose material in his left hand and went to reach for his snips. As he was holding the material, tension was engaged, he felt a pinch of his left ring finger and instinctively pulled his hand away. As he did so he sustained a partial amputation to his left ring finger.",0
"An employee was cutting and racking in a street utility service box when a cap came off a cut live cable and contacted the employee, causing an electrocution and burns.",1
"An employee was helping to complete a tree felling job when the tree was cut and fell on the employee's left leg, resulting in a leg amputation below the knee.",0
"An employee was cutting aluminum siding with a siding brake when his right pinky finger was caught in the siding brake, resulting in a fingertip amputation.",0
"An employee was prepping to run a batch of feed when a grain dust explosion occurred at the establishment elevator, burning the employee. The employee was hospitalized.",1
"An employee was reversing a forklift when the employee became caught between the forklift and a racking system, suffering rib and vertebra fractures.",1
"An employee was cleaning a paint gun when it went off due to pressure and shot cleaning fluid into his fingertip, resulting in a possible finger amputation.",1
"An employee slipped while working on a blowout preventer, falling about 2 feet to the ground and suffering a broken thumb.",1
"On 8/3/2018, at 4:15 p.m. CST (5:15 p.m. EST), an employee used a three-step step ladder to retrieve ""To-Go"" boxes from a storage area. As he was stepping down, his foot slipped on a step and he fell off the step ladder to the floor, landing on his left hand and fracturing his left wrist.",1
"An employee was standing on a pallet reaching for a mattress when he lost his balance and his foot became tangled in the plastic, causing him to fall to the ground and fracture his left leg.",1
"After removing dirt from a residential crawl space for 8 hours, an employee experienced cramping, nausea, and vomiting from heat exhaustion. He was hospitalized.",1
"An employee operating a forklift drove off the back of a trailer, sustaining a back fracture and requiring hospitalization.",1
"An employee was spotting a well servicing rig to a well when his right ring finger was caught between a wire cable and well-head bolt, resulting in a fingertip amputation.",0
"An employee was spotting for a skid steer when the skid loader struck the employee. The employee suffered a left femur fracture, a right ankle fracture, multiple pelvic fractures, a hematoma to the popliteal region, and an L7 transverse fracture.",1
"An employee fell to the ground while handling shopping carts, breaking the pelvic bone.",1
"On August 3, 2018, at approximately 7:30 AM, an employee was helping to unload a railcar. He was attempting to thread a tow strap onto the forks of a forklift when his right pinky finger was caught between the fork and the railcar. He sustained a fracture and partial amputation of the right pinky finger.",0
"An employee was clearing an unloading pump for maintenance. He applied steam, had the pump blocked in, and was relieving pressure on the unloading hose. When he began to loosen the hose, hot water and condensate sprayed onto his clothes and skin. He was hospitalized with first and second degree burns.",1
"An employee was climbing down from a truck by stepping on the forks of a forklift when the employee slipped and fell on the forks, suffering a punctured lung and broken ribs.",1
"An employee was attempting to remove a tangled shirt from an industrial washer when the washer twisted the employee's right arm, injuring the wrist and elbow. The washer was operating at the time of the incident.",1
"An employee was installing metal roofing when the employee slipped and fell 16 to 20 feet from the roof to the surface below, fracturing the right leg.",1
"An employee collided with a vehicle while riding a bicycle at the work site, suffering facial trauma and a broken jaw.",1
"An employee was training with a trainer to operate a high reach forklift when the employee crashed into another parked fork truck, suffering a fractured ankle that required hospitalization and surgery. The employee's leg was outside of the forklift at the time of the incident.",1
An employee was gathering carts in the parking lot when a vehicle struck him. He was hospitalized with a compound fracture to the left leg.,1
"An employee was tightening a lathe chuck when his hand slipped and he fell to the concrete floor, suffering a fractured or dislocated hip. He was hospitalized.",1
An employee was loading a piece of plywood onto a table saw when the saw blade severely lacerated his right little and ring fingers.,1
"An employee was going down the stairs outside a sales home when he lost his balance and fell down the steps, hitting his head. He suffered a concussion, two skull fractures, and a broken ribs, requiring hospitalization.",1
An employee was retrieving clothing to help a client get dressed when she tripped over some loose carpet and fell. She struck the right side of her face on the dresser as she fell to the floor onto her right side. The employee sustained contusions and a concussion and acute right shoulder and knee injuries.,1
An employee was shocked when he came in contact with a live power line. The line was not insulated and his gloves had perforations at the time of the incident.,1
An employee experienced symptoms of dehydration and was hospitalized.,1
"An employee fell off the cab of a truck while trying to clean the back window, landing on the ground and breaking his right arm and dislocating his elbow.",1
"A security representative was attempting to get a disruptive patient back into bed when the patient kicked his abdomen and right side multiple times, causing contusions.",1
"An employee was working with tongues on the drilling floor when his hand entered a pinch point and the tongues caught his ring finger, resulting in an amputation at the first joint.",1
A sheet metal panel fell from a machine and amputated the employee's fingertip.,0
"An employee tripped on a piece of wire while pulling a pallet jack, suffering a right lower leg fracture.",1
An employee was hospitalized due to heat exhaustion.,1
"After lifting heavy trash bags, an employee may have aggravated a recent surgical incision.",1
"An employee tripped while attempting to jump back into a moving van, injuring his knee.",1
"At approximately 4:00 a.m. on 8/5/2018, an employee was repositioning a patient when she felt an intense pain in her lower left back due to a herniated disk.",1
"On August 5, 2018, at 4:15 p.m., an employee was repairing the air conditioning unit in a guest room when the blower fan activated and lacerated his left hand, requiring hospitalization and surgery.",1
An employee amputated a pinky fingertip when it was pinched between a pipe and a stationary object.,0
An employee's right hand was caught in a conveyor and fractured while removing a tool.,1
"An employee was on a step stool cleaning the restroom when he slipped and fell head first onto the concrete floor, fracturing an eye socket.",1
"An employee was attempting to erect a boom when the boom failed, resulting in contusions to the employee's head and knees and multiple fractures to the vertebrae.",1
"While on a ship, an employee was lifting one side of a pipe and putting a strap underneath it. As the employee was about to break out, one end of the pipe joints slipped out, allowing the pipe (6""/40') to roll and strike the employee's lower left leg. The employee's leg was fractured above the ankle, requiring hospitalization and surgery.",1
"An employee slipped on a loading rack and fell down the stairs, fracturing his leg.",1
"While replacing a spray line on a continuous anneal line, an employee installed a come-along on a pipe to remove it. The pipe was rusty on the backside and broke under tension, flying back and striking the employee's arm. The employee suffered a broken left ulna.",1
An employee was lifting and moving 15-pound cases of sports drink when he felt a pop in his lower back. He was hospitalized for a herniated disk in his lower back.,1
An employee suffered an arm injury while entering a gate.,1
"An employee was unloading a trench box panel from a forklift when it fell on the employee, who suffered lower vertebra fractures. The employee was hospitalized.",1
An employee was working at the capping station on a bottling line when some caps fell off the automated capper onto the moving conveyor belt and were caught under the guard. The employee was attempting to retrieve the caps when her right ring fingertip was amputated.,0
"An employee was on a two-step ladder retrieving and lifting a sign overhead when the employee suffered an abdominal hernia, requiring hospitalization.",1
An employee fell and became wedged between a conveyor and the inside of a mobile shredding truck. The employee lost consciousness.,1
"An employee was part of a five-person crew that was removing a polishing rod when the clamp that holds the stuffing box failed, causing the stuffing box to catch the employee's hands against the clamp and stuffing box. The employee's right thumb was crushed, requiring hospitalization and surgery.",1
"An employee was changing the tire and axle of a forklift that was blocked up with jacks when the forklift slipped and fell on the employee's right hand, breaking his ring and pinky fingers and requiring hospitalization.",1
"A maintenance employee had just tightened a deer stand's railing using a battery-operated screwdriver. As he was descending the stairs, he slipped, fell 12 feet to the ground, and suffered fractures to the right wrist and ribs and a punctured right lung. He was hospitalized.",1
"An employee was driving a golf cart when he struck a concrete pole, suffering abrasions to his forehead and left knee.",1
"Two employees were fixing leaking unions when an employee was struck by anhydrous ammonia that released from a pipe, suffering respiratory distress.",1
An employee was working on a cable pedestal near the ground when he was bitten by a snake.,1
"An employee was climbing into his truck cab when he lost his balance and slipped on the second step, twisting his knee and requiring hospitalization.",1
"After conducting flagging operations, an employee experienced hand cramps and nausea at the end of the day. She was hospitalized with low potassium levels and dehydration.",1
"An employee was climbing a wall-mounted ship's ladder while holding a PVC pipe under his arm when his hand slipped off a rung and he fell 10 feet to the floor, fracturing both legs.",1
"An employee was on a ladder checking a fertilizer tank for a potential leak when the ladder kicked out, causing him to fall to the ground. He suffered rib and facial fractures.",1
An employee was struck by a forklift causing a lower right leg injury.,1
"An employee was standing near a winch system when the I-hook to the system broke and whipped around, fracturing the employee's right lower leg.",1
"An employee was operating a shear cutter when his finger slipped and was caught under the part that holds the product down prior to shearing, resulting in a partial finger amputation.",0
An employee was climbing a 15-foot fixed ladder to access a roof when the employee slipped off the ladder and fell 8 feet to the ground. The employee was hospitalized with fractured vertebrae.,1
"An employee was cleaning windows and light fixtures using a step ladder when she lost her footing and fell to the ground, breaking her leg and requiring hospitalization.",1
"An employee was sorting mail packages when a 10-pound package struck his groin, causing a contusion that required hospitalization.",1
"An employee was down on one knee putting away supplies. As she rose from that position, she became dizzy, took a step, and fell to the floor, fracturing her right hip.",1
An employee was operating a microfluidizer when the beaker punctured his left palm and the liquid stream came in contact with his blood. He developed an infection and was hospitalized.,1
"A boat had capsized and 300 pounds of dead fish were on a shoreline. Employees were gathering the dead fish inside heavy-duty trash bags. A fish fin punctured through its bag while being carried by a coworker and struck the injured employee's leg. The employee's leg became swollen and the employee experienced a high temperature, requiring hospitalization.",1
"A temporary employee was assisting a coworker on a metal folder. His hands were inside the folder when the machine's foot pedal was activated. The folder clamps then crushed his hands, degloving his fingertips and resulting in the surgical amputation of two fingers.",1
"An employee was blasting a girder outside when he stopped to refill his blasting pot. As he opened the door/lid, sand and debris released under pressure and struck his face and eyes. A blasting hood was not worn at the time of the incident.",1
"An employee was laying standing seam metal roof decking when he stepped on insulation that was laid out underneath the metal decking and fell 30 feet through the insulation to the ground, landing on a crushed stone surface. He suffered a fractured left arm, fractured pelvis, and diaphragmatic hernia. A safety lanyard was not attached at the time of the incident.",1
"An employee was walking toward a shuttle stop from the parking lot when she tripped and fell to the concrete ground, fracturing her left middle and index fingers.",1
"While checking for failures in the pipe, a pipe that was being lifted by a track hoe rolled and hit the employee's leg, breaking it.",1
"An employee was applying initial stress on a concrete cable using a jack when either the cable snapped or the chuck that holds the cable in the jack failed, creating a pinch point. The employee's left thumb was caught in the pinch point, resulting in a surgical amputation to the thumb.",1
"An employee was working on the metal decking of a new dorm when he went to get a tool and stepped on the deck. The deck collapsed and he fell 12 feet to the ground, fracturing his left hip and requiring hospitalization. A retractable lifeline was not hooked up at the time of the incident.",1
"An employee stepped on mud while exiting a shipping container and fell backwards, suffering a concussion and possible injuries to the neck and back. The employee was hospitalized.",1
"An employee placed his left little finger on the expandable cable of a concrete mold. When he turned the airline connection on, the cord partially pinched his finger. When he attempted to remove his finger, it was amputated and degloved to the base of his nail.",1
"An employee was walking through the warehouse going to lunch when he was struck by a forklift, suffering a broken ankle, concussion, and abrasions to the legs and arms.",1
"An employee was working a piece of wood through a machine when the employee's right index finger was caught between the wood and the machine's guard, resulting in a finger amputation to the knuckle.",1
An employee sustained an adverse reaction to prescribed medication after a needlestick.,1
"An employee was securing a series of cast iron fixtures called shop blocks (used for material elevation and support) in place by tightening bolts to a rotary table using a pneumatic impact wrench. Before tightening the last bolt, he had to secure the fourth and final shop block. The impact wrench was shifted into its reverse position. When he operated the impact wrench, the bolt backed out and pinched his right pinky finger between the impact tool and the internal cavity of the shop block, resulting in a partial amputation of his right pinky finger.",1
"After performing a welding operation inside of a tank, an employee was exiting the tank when his leg caused a welding lead to short against the side of the tank and an electric arc occurred. His leg was burned, requiring hospitalization.",1
An employee was standing on the forks of a forklift to reach a u-box cover that was not fitting when she fell approximately 3 feet to the concrete floor and fractured her right ankle.,1
An employee was hospitalized after being struck by a forklift.,1
An employee was working on an electrical switch gear when an arc flash occurred. He sustained first and second degree burns on his head and face and was hospitalized.,1
An employee was working outdoors and became ill due to heat exhaustion.,1
"An employee was removing chairs from a room when the door slammed closed on the employee's left index finger, severing the fingertip and requiring hospitalization.",1
"An employee was operating a lawn tractor up a paved roadway when the tractor went into neutral and started rolling backward down the hill. The employee turned the wheel and the tractor flipped onto its side. The vehicle was equipped with a rollover protection system and the employee was wearing his seatbelt. When the tractor flipped on its side, the employee's fingertips were pinched between the ground and the tractor, resulting in a left middle fingertip amputation.",0
"On August 7, 2018, an employee was operating a hydrovac when the metal braided hose began leaking. The employee attempted to repair it with tape, and pressure built up in the hose. The hose then struck and lacerated the employee's hand, and high-pressure water and debris were injected into the employee's hand. The employee was hospitalized.",1
"An employee was moving a 246-pound steel plate when it fell on his left foot, crushing and lacerating it with possible toe fractures.",1
"An employee was using a powder-actuated decking tool when the pin caught the edge of a beam flange, causing the washer on the deck pin to shear off and lacerate the employee's right eye.",1
"On August 7, 2018, an employee was erecting a framed scaffold when he fell approximately 11 feet from the scaffold to surface level, suffering a fractured vertebra, pulled muscles in the shoulder and back, a bruised sternum, and arm abrasions. He was hospitalized.",1
"An employee picked something up and his feet came out from under him. He fell straight back and his head hit the floor, suffering a concussion.",1
"An employee was putting away a pallet consisting of 16 cases of canned carrots in a warehouse. While unpacking the pallet of canned carrots, the employee lifted a case off the second to last row and a can of carrots from the bottom row exploded upward, striking the employee's face. The employee suffered facial lacerations, a left nasal bone fracture, a left orbital floor fracture, a soft tissue hernia in the maxillary sinus, left lateral rectus swelling, and loose teeth, requiring hospitalization.",1
An employee was hospitalized for dehydration after performing highway construction.,1
"An employee was working from a ladder when it slid, causing the employee to fall approximately 10 feet to the ground. He broke a bone in his right forearm.",1
"An employee began experiencing cramps while working at a refinery, requiring hospitalization.",1
An employee was operating a handheld spot welder when he started to feel ill and experienced cramps and nausea. He was hospitalized for heat stress.,1
An employee was working on the cheese production line and began to look unwell towards the end of their shift. The employee lost consciousness and was hospitalized due to heat stroke.,1
An employee did not feel well at the end of the day and experienced muscle cramps and vomiting. He was hospitalized for heat stress.,1
"On August 7, 2018, an employee was releasing air from a winder shaft when another employee pushed the core onto the shaft while the employee's finger was still on the air release valve. The employee's left index fingertip was caught between the shaft and the core, resulting in a fingertip amputation.",0
An employee was hospitalized after experiencing leg cramps.,1
"An employee fell 20 to 50 feet from a manlift to the concrete ground below, suffering a concussion, contusions, and a broken leg.",1
"An employee was on the roof (new two story house) fixing an incorrectly installed metal flashing. As he was lifting the metal flashing to add a peel stick, a roof drip edge flashing came out of its box and landed on his left hand, resulting in the amputation of his left middle finger from the first joint.",0
"An employee was overcome by heat exhaustion while stacking pails, requiring hospitalization.",1
"While driving from site to site, an employee experienced nausea, vomiting, and loss of consciousness due to heat exhaustion.",1
"An employee was struck by a powered forklift while pushing a shopping cart on the work floor, suffering a broken hip.",1
An employee manually pushed an unwind shaft into the mill roll and got his right ring finger pinched between the shaft bearing and the mill roll resulting in amputation just below the fingertip at the first knuckle.,0
An employee experienced heat stress symptoms while working outside at a construction site. He was hospitalized for dehydration.,1
"Three employees were repairing an aircraft ejection seat when it fired and ejected from the aircraft. One of the employees was hospitalized with burns and lacerations to the face, arms, and chest.",1
"An employee was pushing a vitals machine down the hallway when she tripped and fell, suffering a dislocated right elbow and three breaks in her lower right arm.",1
An employee was backing up a powered industrial truck after staging a pallet and crushed his left foot between his truck and one parked next to it.,1
An employee was moving a welding positioner when the weight shifted and the positioner arm came down and caused a compound fracture to the employee's lower right leg.,1
"An employee was climbing up an extension ladder to inspect a roof when the bottom kicked out. The employee fell and hit the ground, suffering fractured feet and requiring hospitalization.",1
"An employee was moving pallets around in a trailer when his boot lace became caught on a pallet. He twisted around and tripped on the pallet jack, then fell backwards and hit his head on the floor of the trailer, suffering a concussion.",1
"A temporary employee was operating a magnetic crane to pick up and move a 6000-pound sheet of metal when the metal fell and struck the employee's left foot, fracturing the fourth and fifth digits.",1
An employee suffered two herniated discs while raising the landing gear of a semi trailer.,1
An employee was returning to his truck from delivering freight when an insect stung him. He suffered an allergic reaction and was hospitalized.,1
An employee was hospitalized for heat stress illness after working in a wheat field.,1
"An employee was trying to unclog a filter on a deflasher machine when the airlocks caught the employee's right thumb, resulting in a thumb tip amputation. The airlock was not locked out and was turning at the time of the incident.",0
"An employee was delivering mail to a box mounted next to a customer's door when a dog pushed the door open and jumped on the employee, biting him.",1
An employee was walking away from a house after delivering mail when the home owner opened the door. A dog ran out and bit the employee's lip.,1
"An employee was setting up a bag-maker machine when the employee's left index finger became caught in the machine, resulting in a fingertip amputation to the first knuckle.",0
"An employee was walking in the hallway when she slipped and fell, breaking her right tibia.",1
An employee was trying to hold or guide a wrench and bolt together while using an impact gun at the same time to loosen the bolt. The impact wrench slipped and caused a severe laceration to the employee's left index finger.,1
An agent was wounded after an exchange of gunfire during an attempted arrest.,1
An employee was cutting paraffin blocks on a microtome when the microtome blade partially amputated the employee's left ring finger.,0
An employee fell from a roof ladder and suffered a fractured leg.,1
"An employee was operating a hose reel to rig up the swivel when his fingers were caught in the in-going nip point of the hose reel chain and sprocket drive, amputating his right pinky and ring fingers.",0
"An employee was using a scissor lift to hang ceiling wires. As he was getting off the lift, he slipped, lost balance, and fell backward, breaking his femur and hip. He was hospitalized.",1
"An employee was activating a walk-behind lawnmower when his left ring finger was caught in the brake assembly, resulting in a finger amputation.",0
"An employee was untangling shackles in the live hang area of a plant when the employee's finger slipped inside a groove in the shackles' track, suffering an avulsion that resulted in a medical amputation.",0
"An employee was operating the tail stretcher. After stretching a profile, he began releasing the profile from the stretcher. He was facing the stretcher with his left hand in front of the machine and his right hand towards the back. His left hand passed across the light bar on the stretcher, which opened the jaws. His left ring finger was then caught in the jaws, amputating his fingertip.",1
"On August 8, 2018, employees were rigging an engine coupling on a ship when the tension in the chain fall released and the load shifted, pinning the injured employee's arm against the ship's piping. The weight of the load (coupling) was 4,800 
lbs. The employee's right arm was crushed, fracturing the radius and ulna and requiring surgery.",1
"An employee backed his delivery truck to a loading dock. When he stepped from the truck, his left leg slipped between the truck bumper and dock. His leg was lacerated above the knee. A dock plate was not installed at the time of the incident.",1
"An employee was repairing the front tie rod of a milling machine that broke. He was trying to put the rod together to align it when the end yoke moved and hit his left hand, fracturing his index and middle fingers.",1
"An employee was setting roof trusses when a truss broke below him, causing him to fall approximately 13 feet and break his ankle.",1
An employee was splicing wires outside when the employee experienced dizziness and incoherence due to heat stress.,1
"An employee pulled on a winch line, causing a horse head to slide down and strike the employee's right foot, fracturing it.",1
An employee was helping crew members set up a hydraulic pump when he started to experience leg cramps. He was hospitalized due to possible heat-related illness.,1
"Conductors were being strung up with ropes. While signaling to allow a conductor to be pulled up, an employee did not release the rope and it pulled him in the air. He let go of the rope while in the air and fell to the ground, suffering fractured ribs and a punctured lung.",1
"An employee was attempting to move a piece of carbon steel with a crane when the steel fell off the crane hook and landed on his left hand, resulting in a pinky fingertip amputation.",0
"An employee acting as a spotter was walking alongside a forklift when the forklift operator turned to the right and the left rear tire pivoted outward, contacting the employee. The employee suffered a fractured foot and elbow.",1
An employee was assisting a circular saw operator by holding a piece of wood in place when the blade deeply lacerated his left hand.,1
"An employee was attempting to clear a plugged pipe when a 3/4 "" threaded nipple blew out, causing the contents of the line and flush water to strike the employee. He suffered thermal burns on his abdomen, hands, and arms.",1
"An employee was using a forklift to load a semi-truck trailer. The employee set the forklift brake, got off of the forklift, and walked to the front of the forks. The forklift moved forward and pinched the employee's left calf between the double forks of a slip sheet attachment. The employee suffered a left calf laceration and was hospitalized.",1
"An employee was diagnosing failed equipment when he made contact with the side of the equipment, which had a short, and experienced an electrical shock.",1
"Employees were disposing of hazardous chemicals when two components mixed and caused an explosion, resulting in a 20-foot flame. The injured employee's entire body caught on fire, suffering severe third and second degree burns.",1
"On August 8, 2018, an employee was cranking the landing gear on a tractor-trailer when he experienced lower back pain, requiring hospitalization for a back strain.",1
"An employee was winding rolls of sorbent plastic material when one of the cores became stuck. She hit the core with the palm of her hand as instructed to make it move again. It began rolling and her left hand was caught and crushed in the machine. She suffered bruising and a fracture to the middle finger, a cut to the end of the middle finger that needed stitches, and some bone chipping to the pinky finger.",1
"An employee was working next to wrapped pallets of boxes when the boxes fell and struck her leg, fracturing it. She was hospitalized and had surgery.",1
"While working on a conveyor, an employee fell from the crossover walkway which runs over the conveyor.",1
"An employee was in a man basket at a terminal unloading a rubber tired gantry crane. He was taking the pin off the crane shackle when his left thumb was caught between the shackle, resulting in a partial amputation to the thumb tip.",1
"An employee was attempting to move a dolly/basket out of the way with his foot when his foot became stuck on the basket, causing him to lose his balance and fall to the floor on his right side. He suffered a right hip fracture.",1
"An employee was leaning against a handrail located in front of a tool trailer when the handrail gave out and the employee fell backwards, striking his head and back against the ground. He suffered bleeding inside the brain, requiring hospitalization.",1
"An employee suffered heat-related stress after delivering mail, requiring hospitalization.",1
"An employee mixed epoxy paint and thinner (two-part epoxy) and added it to a pneumatic spray gun before entering a negative pressure paint booth to paint a pump. The employee wore safety glasses, gloves, and a half-mask respirator before entering the paint booth. Within 10 minutes of removing the respirator and cleaning the gun, the employee began itching due to a suspected allergic reaction to the paint. The employee was hospitalized for a possible heart attack.",1
An employee was pulling grass from a grade stake when a coral snake bit his right forearm. He was hospitalized.,1
A beam was being moved when it fell on an employee's leg. The employee was hospitalized.,1
"An employee fell approximately 20 feet from a ladder, resulting in a little finger amputation.",1
"An employee was responding to a call to provide assistance when he came upon a wet concrete floor and slipped, falling to the concrete floor and injuring his hip.",1
"An employee was operating a pneumatic nail gun at the ridge of the roof when the gun shot a nail into his foot, entering the bone. He was hospitalized.",1
"An employee was attempting to clean out a tack truck when the spray bar expelled tar/tack onto the employee. He suffered second degree burns to the right side of his face, ear, neck, chest, and arm.",1
"An employee was making a patient's bed when the employee's knee gave out. The employee fell to the floor and suffered a broken right hip, requiring hospitalization.",1
"An employee was moving a cart when it became stuck. The employee slipped and fell onto a piece of angle iron while attempting to unjam the cart, cracking a rib.",1
An employee was chopping sun dried tomatoes when his knife hit and amputated his left thumb tip.,0
"An employee slipped and fell off a ladder to the floor, suffering a fractured right leg.",1
"An employee was working on a broken limit switch, attempting to place the stop pin back in place, when the employee's right fourth finger distal tip was compressed between the housing and stop pin. The employee's distal tip was amputated (no bone loss).",1
"An employee was carrying serving trays from the dining area to the kitchen sink for cleaning when the employee struck a cart and fell, suffering a fractured hip.",1
"An employee fell off a 10-foot step ladder when he missed a step, falling on the concrete floor and impacting his back and head.",1
"An employee lowered a ladder into a ventilation shaft to rescue a cat. The employee fell to the ventilation shaft floor while trying to get down the ladder, suffering a spinal compression.",1
An employee amputated their right pinky finger while unjamming a machine.,0
"An employee was trying to look at electrical devices that were on a wall behind vertically stacked drywall when the drywall fell towards him, striking and breaking his right ankle. The employee was hospitalized and required surgery.",1
"On 08/09/2018, an employee was installing a new baler when it shifted and he fell approximately 5'8"" off the baler to the ground, suffering broken ribs, a broken collarbone, and a punctured lung. He was hospitalized.",1
"An employee was attempting to disconnect the whip line from a lifter on a pre-cast concrete member. As the whip line got tension, the employee's left ring finger was caught between the lifter and the cable, causing a fracture and laceration.",1
"An employee was assembling valves on a filler machine when his left hand was caught between the valve housing and the valve opener, resulting in an amputation of his ring finger's first joint.",0
"An employee was standing on a pallet when her foot became caught. She then tripped and fell, breaking her hip.",1
An employee had completed a butt-weld on two wire coils and had tossed the welding cable behind him. He was then on his way out of the work area when he stepped on either the cable or the connector to the cable. The cable then rolled and he fell onto his right side. He was unable to move his right leg due to a fractured right hip.,1
An employee was repairing a loading dock plate when the plate slipped and struck the employee. The employee was hospitalized with a severe head injury.,1
Two employees were working on a pump. The first employee had his hand in the pump when the second employee rotated the drive line. The rotating pump parts then caused an amputation to the first employee's right index finger and laceration to his middle finger.,0
"On 8/08/2018, at 11:45 a.m., an employee was climbing a portable ladder when he fell to the ground and fractured his ankle, requiring hospitalization.",1
"An employee was feeding wood into a jointer when the employee's left hand slipped into the blade, resulting in a pinky finger amputation.",0
An employee was using sandpaper to remove tool markings from a stem that was on a rotating manual lathe when the sandpaper became snagged on a burr and pulled the employee's left arm around the piece part being worked. He suffered a broken ulna and radius bone in his left arm.,1
An employee was cutting tomatoes with a hand knife when the knife caused amputation injuries to the employee's right thumb tip.,0
"Employees were performing steel erection activities and placing clips, insulation and roof sheeting onto a pre-engineered metal building. The employees were walking and working from a partial bundle of roof sheeting (approximately 3 sheets). During the operation, an employee stepped on an inadequately supported area of the roof sheeting partial bundle; the sheets bent down and the employee fell 21 feet to the ground below. The employee was hospitalized with a broken arm and tailbone.",1
"An employee was helping another employee install bridge beams on a construction site on a hot, humid day when he began to feel dizzy and lightheaded. He then began to experience muscle cramping and vomiting and required hospitalization due to dehydration.",1
"An employee was unloading freight from a trailer when he experienced cramping and dizziness, requiring hospitalization for dehydration and renal failure.",1
"On August 9, 2018, while bending over a patient's stretcher to draw blood, an employee developed back pain and difficulty breathing possibly related to a heart attack.",1
"An employee went outside to pick up some food that another employee had picked up for her at a fast food restaurant. As she was walking down the stairs to go back into her department, she fell down the stairs to the floor and broke both ankles, requiring hospitalization.",1
"An employee was removing a nozzle from a relief valve with a 48-inch pipe. He put one leg over the pipe wrench and used his body weight to attempt to break the nozzle loose. On the first push, the wrench slipped off the nozzle, which caused the employee to fall downwards with his fingers under the wrench. The force of the fall onto the concrete floor caused his left middle fingertip to mostly separate.",0
"An employee was splicing a telecommunication line on a pit when he became dizzy and nauseous due to heat-related illness, requiring hospitalization.",1
An employee was using a band saw to cut meat when the saw amputated the employee's right middle and ring fingertips.,0
"An employee was cutting wood with a saw when a piece of wood came out of the saw and punctured the employee's abdomen, requiring hospitalization.",1
"On August 9, 2018, at approximately 4:00 p.m., a temporary employee suffered from heat stress, dehydration, and heat exhaustion while delivering mail on a foot loop. He became incapacitated and required hospitalization.",1
An employee was hospitalized with heat exhaustion after working as a concrete finisher at a commercial construction site.,1
An employee was hospitalized after slipping on wet floor tile in the parking garage.,1
"An employee was setting up a part on a machine that laminates PVC windows. He was picking out a piece of lamination film (vinyl laminate) left over after being trimmed off a piece of PVC window extrusion profile when his right middle finger entered the operating drive roller. As he pulled his finger out of the roller, it pulled off his right middle fingertip at the first joint.",0
"An employee was watching a second employee assess a noise from a cut-off saw. The first employee grabbed the blade because he thought it looked loose. At the same time, the second employee ""bumped"" the saw, which caused the blade to grab the first employees right index finger and amputate the tip. The saw was not de-energized at the time of the incident.",0
"An employee was sliding a gear box cover off a pallet by hand when his left middle finger was caught between the gear box cover and the wooden pallet, resulting in a finger amputation.",0
"An employee fell 6 feet from an 8-foot step ladder to the ground while installing ductwork, breaking his left fibula.",1
"An employee was packing product for shipment when the rear wheel of a powered forklift struck the employee's right foot, causing an open fracture.",1
"An employee was walking on ceiling joists in an attic when his foot slipped off the joist and he fell through the ceiling, landing on the floor 10 feet below and fracturing his left wrist.",1
"An employee was reaching down to the floor to pick something up. At the same moment, her gloved hand came in contact with a roller that was moving, resulting in the amputation of two fingers on her right hand.",1
"An employee was handling a dock plate when his right index finger was caught and crushed between the dock plate and the dock, resulting in an amputation before the first knuckle.",1
"An employee was attempting to retrieve a bolt stuck in a roller machine when the rollers caught his glove and pulled his left hand into the machine, breaking two fingers.",1
"On 08/09/2018, at approximately 9:00 PM, an employee was cleaning the belt of a notcher when his right middle finger was caught between the belt and pulley of the notcher, resulting in a partial finger amputation.",0
"An employee was pulling a tube from a strut machine while jogging the machine when the employee's left little finger was caught in the machine, resulting in a laceration and crushing injury to the finger.",1
"An employee was troubleshooting an energized sub-station breaker when an arc flash explosion occurred, causing second and third degree burns to the employee's arms, hands, and face.",1
"Two employees were pushing a one-person vertical manlift onto a chair elevator. The lift had heavy-duty castors on the bottom. When the manlift entered the elevator, it shifted away from one of the employees, causing him to lose his balance and fall forward into the lift. In striking the lift, he dislocated and cut his right elbow.",1
"An employee was attempting to open a dog crate when the dog bit the employee's hand, resulting in a fingertip amputation.",0
"An employee was ground guiding a food catering truck on an airport terminal ramp when a baggage cart vehicle struck the employee, fracturing both of the employee's femurs.",1
"An employee was polishing a part on a lathe with sandpaper when the glove she was wearing was caught on the part and pulled her left arm into the lathe, resulting in a left arm amputation at the elbow.",1
"An employee lost control of an electric pallet jack while positioning it. His left foot was then pinned between the jack and a safety pole, breaking his big toe.",1
An employee had been in a kneeling position using a power tool to bolt slot bases together when he stood up and felt pain in his abdomen due to a hernia.,1
"On August 9, 2018, an employee was using an electric grinder to remove the welds from an elbow fitting that was strapped to a welding fixture when the elbow fitting kicked back and his fingers were pinched between the elbow and welding fixture, resulting in right index and middle fingertip amputations.",0
"Three employees were lowering a desk to the ground when the desk fell, crushing one of the employee's right index fingers between the bottom of the desk and a metal floor-mounted outlet box. As a result, his right index fingertip was amputated between the nail and first knuckle.",0
An employee was working on the ingredients scale in the blending facility when an air operated slide gate activated and severed the employee's hand.,1
"An employee was standing by a company truck during an outdoor survey of a piece of land when the employee collapsed to the ground. The employee suffered from heat stress, dehydration, and exhaustion, requiring hospitalization.",1
"On August 9, 2018,at approximately 12:25 a.m., an employee was walking along a grated walkway while inspecting fire extinguishers at a third-party facility when the grating gave way. He then fell approximately 20 feet and injured his back, requiring hospitalization and surgery.",1
"On August 10, 2018, during fire-fighting operations, an employee suffered from heat-related illness and was hospitalized as a result.",1
An employee was using a filter to filter ingredients into a mixer when the filter became caught on the rotating shaft of the mixer. The filter then amputated the employee's right middle and ring fingertips.,0
"An employee was loading a metal part into a machine when the metal part kicked backed, pinching his left middle finger between the part and the table. His left middle fingertip was amputated. The machine was unguarded at the time.",0
"On 08/10/18, at approximately 2:00 AM, a maintenance employee was performing repairs to an oxygen line that was part of a plant's oxygen air system. The employee repaired the hose, tightened the clamp on the hose, and instructed another employee to turn the oxygen back on. When the oxygen was turned back on, the hose exploded in the maintenance employee's hands.  The employee was hospitalized with burns to both hands.",1
"While performing mechanical work on heavy equipment, an employee experienced dizziness, disorientation, and a raised body temperature due to heat stress.",1
"An employee's right ring finger was caught between the front lip of a manual dock leveling plate and the physical stop, resulting in an amputation to the finger.",0
"An employee was on a walk-behind mower with a slide when he tried to open a gate on the right side of an entrance and the mower spun into the left post of the gate. Three of the employee's fingers were pinned between the mower and the gate as he fell to the ground, resulting in right pinky, ring, and middle fingertip amputations.",1
"An employee was using an overhead crane to move pipe when the pipe became caught and knocked over jack stands holding another pipe. The other pipe fell and struck the employee, pinching his left arm and slicing a tendon. He was hospitalized and had surgery.",1
"An employee was coming down a standard ladder when he missed the third or second to last step, jumped backwards, and landed crooked on one foot, resulting in a broken leg.",1
An employee was collapsing forms when his finger slid down the side of the form and was amputated.,1
"An employee fell off a ladder, striking her foot on the ground and breaking her heel.",1
"An employee was struck by a golf cart while standing outside, suffering lower back and abdominal contusions.",1
An employee sustained an amputation to the right index finger while operating a 45-ton punch press.,0
"An employee was attempting to adjust the height of the line at a vibrating conveyor press when the employee's hand was caught between a movable and stationary part of the machine, pinching and breaking the right index finger.",1
An employee suffered a fat-pad amputation while operating a core driller.,1
"An employee fell from the roof of a one-story building while setting roof trusses, landed on the ground and punctured a lung.",1
"An employee was driving a forklift when he struck a pallet of pipes. A pipe then hit his head, causing head trauma that required hospitalization.",1
"An employee was helping a forklift operator offload a broken-down pallet jack from a delivery truck. The forklift operator was using a strap to pull the pallet jack when the strap snapped and struck the employee's face, lacerating his eyebrow, forehead, and chin.",1
"An employee was unloading a part from a vertical milling machine when the employee's fingers were caught between the part and the table, resulting in right ring and pinky finger amputations.",1
"An employee was cleaning a machine when a clamp activated and pinched the employee's right index finger, amputating the fingertip.",0
"An employee was being walked off the job site when he was involved in a physical altercation with two other workers and fell to the ground, fracturing his right tibia and fibula. He was hospitalized and had surgery.",1
An employee was building an automation machine when a part jammed in the machine. The employee reached in to grab the jammed part and the machine cycled. The employee suffered an amputation of the pinky finger on his left hand.,0
"An employee was placing shims to align crop dies in a shear machine. When the machine was activated, the employee's right hand was caught in the point of operation resulting in partial amputations to two fingers.",0
An employee was installing a tire when a wheel failure caused an explosion in the employee's face. The employee suffered a head injury.,1
"An employee was operating a powered industrial truck when the employee stepped off the lift, slipped on the step, and fell to the concrete floor. The employee suffered a fractured left knee, requiring hospitalization.",1
An employee was burned on the right shin by caustic material and hospitalized.,1
An employee was bitten by a rattlesnake.,1
"On August 11, 2018, at approximately 7:30 a.m., an employee was stocking product. He was holding an alternator part in his left hand and reaching for a part with his right arm when he suffered a right shoulder fracture.",1
"An employee was cleaning a de-stoner machine when the machine's lid smashed the employee's right ring fingertip, resulting in a fingertip amputation.",0
"An employee's finger was caught between a door and the door jam, resulting in a right middle fingertip amputation.",0
"An employee fainted and fell, suffering a fractured hip and requiring hospitalization.",1
"On Saturday, August 11, 2018, four employees were unloading a barge containing structural steel.  One employee was operating an overhead crane remotely when the cable jumped off the hoist. The injured employee went on the crane to see if there was anything he could do to get it back on track.  While he was trying to get the cable back on track, tension developed in the cable, severing the ring, middle, and index fingers of his left hand and the index and middle fingers of his right hand.",1
"An employee was delivering mail at a resident's house. He was walking on the driveway, which had cracks and was slippery from rain, when he slipped/tripped and fell onto the pavement, breaking his left ankle.",1
"An employee was walking down some stairs when the employee missed the last step and fell to the ground, fracturing the left arm.",1
"An employee was walking toward a coffee counter to make coffee when she fell on the floor, injuring her hip and requiring hospitalization and surgery.",1
"An employee was using an air hose to clean up/blow off sawdust from the work area. When he sat the hose down to go turn off the shut-off valve it started jumping around and hit his buttocks, causing a 1"" to 2"" laceration that required hospitalization.",1
"Am employee was removing sand that was jammed in an auger when the employee's right middle finger was caught in the auger, resulting in an amputation at the first joint.",0
A temporary employee was setting up the die on an A-40 line. She was moving the parallel when it fell  on her left hand. Her hand became swollen and required hospitalization.,1
"An employee was cutting meat using a band saw when he slipped and/or twisted his ankle and reached out to catch himself. As he did so, his hand struck the band saw, resulting in a partial amputation to his right index finger.",0
"An employee was using a tire-mounting machine when the tire exploded and struck the employee's right arm, tearing ligaments and tendons.",1
"An employee was working on a work-over rig floor at a well site, pulling equipment out of a rod basket, when a 2.5-foot-long x 1.5-inch-diameter metal rod (safety bar) fell from the rod basket and struck the employee's left shoulder. The employee suffered a broken collarbone and a puncture wound to the skin.",1
"An employee was assisting a customer when a bleach container fell out of the customer's cart and ruptured upon contact with the floor. As the employee was calling for cleanup and guarding the spill, she experienced an asthma attack from the bleach vapors, requiring hospitalization.",1
"An employee was cutting meat with a band saw when the sawblade cut his left thumb, resulting in a thumb tip amputation. The blade was unguarded at the time of the incident.",0
"An employee was removing a hood from the hull of a ship when his right middle finger was caught between a sling and the protective cage of a track hoe, resulting in an amputation at the first knuckle.",0
"An employee was working in the bakery when she slipped, fell to the floor, and broke her leg.",1
"An employee was attempting to start a grill in a food tent when the propane ignited, causing second degrees burns to his hands and forearms and first degree burns to his face.",1
An employee fell approximately 11 feet while erecting a pipe scaffold.,1
"An employee was descending a fixed ladder on the side of a blender when he attempted to step down to the next step and his hand slipped. He then fell 1 to 2 feet to the ground and tried to stop himself with his right hand, resulting in a fractured right arm.",1
An employee was troubleshooting propane gas grills and sustained second degree burns to the left arm and hand.,1
"An employee was rolling a keg off a skid when it slid and landed on his left middle finger, amputating the fingertip.",0
An employee's right leg was caught against a concrete slab by a wheeled power buggy that another employee was driving. The employee suffered a compound fracture that resulted in an amputation above his right knee.,1
An employee was getting into the garbage truck when he slipped and fell backwards sustaining hip/pelvic fractures.,1
"An employee was helping to unload a truck when 10 sheets of drywall shifted on a dolly and fell onto the employee's right leg, breaking the tibia and fibula. The employee was hospitalized.",1
"An employee was attempting to secure a reinforcing steel cage into place when he was caught between the steel cage and a section of a temporary concrete barrier wall. He suffered a lacerated and fractured left index finger, broken right ankle, and hernia.",1
"On August 13, 2018, a beam fell off a table and struck an employee's leg, breaking his tibia.",1
"An employee was on a ladder working on overhead lights when the employee fell from the ladder to the next lower level, suffering head and bodily injuries.",1
"On August 13, 2018, at 11:30 AM, an employee was cutting wood to length using a header saw when the saw amputated his left pinky fingertip.",0
"An employee fell from a 4-foot ladder while working in a vacant apartment, suffering internal bleeding.",1
"A crane operator was lifting a vertical pipe inside a steel tower structure so the pipe could be cut to size when the pipe started spinning. An employee went to check on the pipe when it came loose and fell approximately 6 feet, crushing the employee against the tower structure. The employee suffered injuries that resulted in a medical amputation of the left hand and left leg.",0
An employee was standing on a bucket that was turned upside down to clean his truck. He fell off the bucket onto the concrete floor and suffered a fractured skull and neck.,1
"An employee injured his right knee while using a platform ladder, requiring surgery.",1
"An employee was descending steps when his foot became caught and he fell down approximately five steps, cracking three ribs and requiring hospitalization.",1
An employee was hospitalized for a suspected heart attack while installing solar panels.,1
"A temporary employee was supporting an approximately 20-foot-long rotating reaming device that was being run through heat exchanger baffle plates when his gloved hand contacted the rotating reamer at high speed. The reamer rotated his right middle finger, resulting in an amputation.",1
"An employee was moving a metal dump pit grate when his finger was pinched between the dump pit grate and the dump pit grate housing, causing a laceration and broken bone that resulted in an amputation.",0
"An employee was walking backwards while assisting a client when she fell to the ground, fracturing her hip.",1
"An employee was cutting quartz material at a 45-degree angle with a stone grinding machine when the machine jammed. The blade then caught the back part of his right hand, cutting a tendon. The grinder also caught the left sleeve of his shirt, resulting in abrasions to his shoulder.",1
"An employee experienced heat-related illness while disconnecting, removing, and repairing a soot blower.",1
"An employee was unjamming a metal chicken cage on a cage dump conveyor when he was caught between two cages, suffering left foot ligament damage and lacerations.",1
"An employee was setting up five mud tanks and a mud pump. While he was hooking up the fifth mud tank to the fourth mud tank, a gap formed between the hose to the union. He inched the cable over multiple times to close the gap. Then, the driver lifted the mud tank up, which caused the cable line to pull the employee's finger between the truck roller, resulting in an amputation of the end of his left index finger.",1
"An employee was backing up with scrap from a part when the back of his heel became caught on an air hose and he lost his balance. He fell backwards, landing on his back and hitting his head on the concrete floor.",1
A temporary employee was running parts into a press die when the machine was activated and amputated three of the employee's right-hand fingers.,1
"An employee was stepping out of a walk-in cooler when his foot was caught on the gate and he fell to the ground, fracturing his hip.",1
"An employee was exiting a service bucket that was in the stowed position when he fell, breaking five ribs and puncturing a lung.",1
An employee was attempting to remove a shirt that fell between the seat and motor of mowing equipment when the motor caught and lacerated his right hand.,1
"An employee was in the shower room attempting to reach the top shelf of a cabinet to obtain a shower cap for a resident who was taking a shower.  The cabinet (which is approximately 6 to 7 feet tall) began to tip and fall on the employee, causing her to fall against a trash container.",1
An employee was operating a moulder machine when it jammed. The employee was attempting to clear the jam when the machine's cutting blades severely lacerated four fingers. The machine was in operation at the time of the incident.,1
"An employee was attempting to deposit concrete mix into a cement mixer when the dispensary gate came down onto his right-hand fingers, catching and amputating his middle fingertip. The machine was guarded at the time of the incident.",1
"An employee was conducting electrical work in the ceiling while standing on a ladder when he received a shock from a hot wire and fell to the floor, landing on and injuring his back.",1
An employee was working as a mixing room assistant and was reaching for material coming out of a 600-liter mixer when the employee's finger was caught and amputated in the blade of the mixer.,0
An employee suffered a partial amputation to his right thumb while operating a table saw.,0
"The injured employee was passing lead bricks so they could be cut to size while another employee was picking up the bricks from a pallet. Two of the bricks were stuck together by grease. The other employee forcefully dropped the lead bricks on the pallet to free them. The injured employee reached out at the same time and the bricks struck his left pinky finger, resulting in a fingertip amputation.",0
"An employee was checking an ice machine when his hand came in contact with an ice auger, lacerating his left thumb and fracturing his index finger.",1
An employee was moving a vending machine when it tipped over on him. He injured his hip and was hospitalized.,1
"On August 13, 2018, an employee walked on a wet linoleum floor after it had just been mopped.  She slipped and fell, breaking her wrist and fracturing her hip and pelvis.",1
"An employee was walking when he lost his footing and fell back while his foot was in place, causing his left leg to break.",1
"An employee was on the ground directing a telehandler that was placing trusses when the telehandler tipped, pinning her beneath the boom. She suffered a compound fracture in her leg, arterial bleeding, and a spinal injury.",1
"An employee slipped on steps located at a patient's residence and fell onto an oxygen tank that was on a cart at the base of the steps, suffering a puncture wound to the neck.",1
An employee was removing bread from equipment when the equipment caught and lacerated her right index finger. The equipment was unguarded.,1
"An employee was on a ladder installing lighting inside an elevator shaft when the elevator became energized and the counterweights came down on him, pinning and crushing his shoulder and arm area. He suffered multiple fractures to the arm, shoulder blade, and clavicle.",1
"An employee was connecting steel when he reached for a hoisted joist, lost his footing, and fell approximately 25 feet, fracturing his wrists and femur. He was hospitalized.",1
"Bleach and acetic acid were mixed together, releasing chlorine gas. An employee suffered an inhalation injury.",1
An employee suffered an amputation while working with a truck frame following a frame flip-over.,1
"An employee was attempting to unload paper from a wooden pallet when the pallet broke.  She tried to stabilize the paper, but it fell on her, causing her to fall backwards/sideways and hit her had on the floor. She suffered bruising on her legs and a possible concussion.",1
"An employee was adjusting a pedestal fan when his right thumb went through the guard in the back of the fan and was struck by the fan blade, suffering multiple fractures.",1
"An employee was performing a PM on a pump house silo pad steam station when a steam valve was actuated, releasing steam and hot condensate on the employee. He sustained second degree burns on his torso.",1
"An employee was helping to set up for an event and was opening a storage container door when it fell on the employee's foot, resulting in a broken femur and ankle.",1
"An employee was operating a press brake when the die amputated four of the employee's fingertips. Pull-back devices were in stalled, but not in use.",1
An employee was working on an electrical component of the water pump when the lead contacts sparked. The sparks ignited an unknown gas that was coming from a capped well in the work area. The employee was engulfed in flames and sustained first and second degree burns to both hands and wrists and first degree burns to his face.,1
An employee suffered heat stress while riding as a passenger in a delivery vehicle. The employee was hospitalized.,1
"The injured employee was putting a stencil on the south side of a pipe. Just behind the injured employee, a coworker was in the process of quality testing a finished pipe. The coworker was raising the rotator when a pipe that was not centered correctly rolled off the rotator and struck the injured employee. The injured employee suffered a broken pelvis.",1
"An employee was cutting wires, working from a ladder. A piece of skull from a furnace fell and struck the ladder. The employee fell from the ladder onto a scrap bin, suffering broken ribs.",1
A 20-ton crane was removing a vibrating conveyor trough from the facility. The crane operator was swinging the trough to the left when the trough shifted in the cane and broke the safety latch on the crane hook. The trough fell about 5 feet and struck an employee in the chest. The employee suffered arm fractures and a broken rib.,1
"An employee was cutting a piece of aluminum with a chop saw. The piece caught on the blade and hit the employee's finger, lacerating it. The employee was hospitalized.",1
"An employee was pushing a bariatric bed through a doorway when the employee heard a pop and later passed out, requiring hospitalization for a spinal cord injury.",1
"On August 14, 2018, a UPS employee injured his lower back while placing a package on the floor of a package car.",1
"While subduing an aggressive patient, an employee was knocked to the floor, suffering a fractured left patella.",1
"An employee's right middle and ring fingers were caught between two pieces of metal that are parts of an automated rivet inserter. The two pieces of metal pressed together, partially severing her middle finger.",1
"While shutting off a table lamp, an employee tripped on a couch and struck her head on the table. She suffered a head injury and lost consciousness.",1
"An employee was operating the lift gate on his truck with a controller. He slipped in the mud and fell, and the controller lowered the gate onto the tip of his thumb. The tip was amputated.",0
"An employee was traversing an aircraft wing stand when it rolled out of place and the employee fell 7 or 8 feet. The employee suffered broken ribs and a possible shoulder injury, requiring hospitalization.",1
An employee was performing maintenance on a stamping press that had locked up. The employee was using a hydraulic jack and a make-shift tool to push the frame upwards. The pressure from the jack released causing the employee to be struck and thrown backwards about 10 feet. The employee's arm was also caught. The employee sustained broken bones.,1
An employee was attempting to clear a piece of aluminum that was stuck in a pneumatic punch press' point of operation when the machine cycled and amputated his right index fingertip.,0
"An employee's left index finger was caught in a hammer drill, resulting in an amputation at the first knuckle below the fingernail.",0
"An employee was stepping out of a tractor trailer cab and slipped on the edge of a step that had no traction, falling backwards to the asphalt. She suffered bruising to the legs and buttocks as well as a concussion.",1
An employee was picking paper up off the floor when a reversing clamp truck carrying a roll of paper struck the employee. The employee suffered a leg fracture.,1
An employee was trying to remove a python from a temporary cage. The python bit the employee's arm.,1
"While removing a plywood floor cover on a flat roof, an employee fell through an opening in the roof. The employee fell onto a scissor lift guardrail, suffering a lacerated liver.",1
"An employee was standing on a ladder and had just completed replacing a customer's service line when he fell from the ladder as he began to descend. He landed on the concrete driveway and ground, requiring hospitalization.",1
"An employee was operating a hand cart and delivering food products down a staircase when his finger was pinched between the stairwell and the hand cart, crushing and lacerating his finger and resulting in a fingertip amputation.",0
"An employee was working from a ladder, cutting tree branches with a chainsaw. The employee fell 6 feet to the ground, suffering head, back, and rib lacerations.",1
An employee was using a table saw to cut material when the saw blade amputated his thumb.,0
"An employee entered an area to unhang a piece of lumber on a set of conveyor chains for a sorter machine. Another employee, unaware that the employee was in the area, indexed the chains, pinning the first employee between the piece of lumber and an unstacked pack of lumber. 

The employee was hospitalized with a lacerated spleen and pancreatic transection.",1
"On August 14, 2018, around 10 a.m., an employee fell to the ground while attempting to climb the side of a disposal truck and fractured his spine.",1
"An employee was installing electric cables to an overhead conveyor (vertical trolley) for an e-stop when his sleeve was caught on a sprocket, causing his hand to be drawn into the area. He suffered a fractured left wrist.",1
An employee was pushing a rolling gate door open when he suffered a back injury: nine compression-fractured vertebrae and one compound-fractured vertebra with internal bleeding.,1
"An employee was ringing up customers when an unknown suspect approached her to rob the store, grabbed her by the neck, and shot her three times (one in the abdomen and two in the leg).",1
"An employee was unjamming a guide wheel in a flask elevator. When the guide wheel was unjammed, it moved and pinched the employee's finger, resulting in a right middle finger amputation below the fingernail. The flask elevator was not locked/tagged out at the time.",1
"An employee was operating a standard manual office paper cutter when the employee made contact with the blade, resulting in a partial finger amputation.",0
"An employee was standing on a plank set between two step-ladders while using a cordless drill to firmly screw/drill into metal siding. He lost his balance and fell approximately 5 feet to the ground below, breaking his wrist and forearm.",1
"An employee tripped and fell, breaking a bone in the right arm.",1
"An employee was loading cargo ship containers when he was caught between two cargo ship containers, resulting in a broken arm and ribs. He was hospitalized.",1
An employee was getting into the back seat of a vehicle when it began to roll forward. The rear tire rolled over his foot; he suffered a broken left ankle and two torn ligaments.,1
"A TMS employee was performing maintenance work on a steel plate rolling machine. A hold-down clamp crushed the employee's foot, leading to an amputation of the little toe.",1
An employee suffered four finger amputations while prying a forklift fork while a dock plate was positioned on the forks.,0
"An employee was closing a lumber kiln and opening a second one to put more lumber in to dry when the door to the second kiln fell on him, fracturing his right leg and possibly fracturing his back.",1
"An employee was riding in a van when he exited the vehicle and fell backward, hitting and lacerating his head on the asphalt road. The van was moving at the time of the incident.",1
"An employee was working outside on a hot, humid day when he began to feel ill. He drank some water, went into a restroom, vomited several times, and lost consciousness, hitting his head on the floor. He suffered dehydration and a head laceration that required staples.",1
"An employee fell from scaffolding to the ground and suffered a broken wrist, broken ribs, and a punctured lung. The employee was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee was changing the head on a punch press. The press cycled, and the ram lowered and pinched the employee's thumb against the head, causing an amputation to the end of the thumb.",0
"On August 15, 2018, an employee experienced a heat related illness while working as a cart collector.",1
"On August 15, 2018, an employee's hand was stuck in a moving roll of product. The employee suffered lacerations and swelling.",1
"A crane operator was removing a pin from a jib. The operator lost balance and fell from top of the crane to the ground, 4 feet 10 inches below.",1
"An employee was completing patient care tasks and struck her head on the TV in the room, causing a concussion.",1
"An employee was installing wire above the ceiling while standing on a ladder when he lost his balance and fell to the ground, fracturing his tibia and fibula.",1
An employee was shot in the leg by two customers who were fighting.,1
"An employee was walking up jet bridge stairs from the ramp while carrying a stroller. The employee opened the door at the top of the jet bridge stairs and the door closed quickly, pinching his right ring finger. The skin and fingernail were removed from his right ring fingertip.",0
"An employee had used a yard mule to park a trailer and was pulling away from the trailer when the yard mule's air hose separated and snapped back through the open rear door, striking the employee in the forearm near the wrist. The employee suffered a compound fracture of the right radius and ulna.",1
An employee from ABM was working in a foundry troubleshooting the door that weighs 300 lbs. on an X-ray unit. The door was stuck and the employee was under the unit troubleshooting the problem when the door released and pinned his forearm under the weight of the door. He sustained nerve damage and a laceration from his left elbow to his forearm that required stitches.,1
"An employee was on a ladder attempting to install artwork on a wall when the employee fell approximately 20 feet to the ground, suffering a broken collarbone and a concussion that required hospitalization.",1
"An employee was attempting to cut excess gauze from a production machine's rollers when the material caught the employee's hand and pulled it into the roller, amputating the left middle fingertip.",0
"An employee was moving a metal part from one pallet to another when the part slipped and the employee's finger was caught between a pallet and a strapping table. The employee's finger was fractured, lacerated, and crushed.",1
"A temporary employee was removing a jammed corn cob from a conveyor system when his left ring finger was caught in the conveyor's drive side sprocket, amputating his finger in the nail area.",0
"An employee tripped and fell while walking, suffering a fractured hip that required hospitalization.",1
"An employee placed a ladder on a mid-span and was ascending the ladder when it shifted. The shift caused one of the hooks to come off the mid-span. He dismounted from halfway up the ladder and landed on his feet, breaking both ankles.",1
"An employee was performing maintenance on forging machines when a set of dies ejected from the machine and struck his foot, resulting in a medical toe amputation.",0
"On August 15, 2018, an employee was operating a stand-up forklift and turning a corner when the vehicle hit a wet spot and started to slide. The employee released the dead man switch to stop the forklift and then dismounted the vehicle during the slide. His left foot/ankle was struck by the vehicle and a plastic pole protector as the vehicle continued to travel in the direction he exited. He suffered multiple fractures and a puncture wound.",1
"An employee was cleaning a print roller's nip point when his right thumb was caught in the nip point, degloving his right thumb. The print roller was running at the time.",1
"An employee was unloading windows from the back of a flatbed truck. The employee fell from the truck, and windows landed on his right lower leg. He suffered broken bones requiring surgery.",1
An employee suffered heat-related illness and dehydration while working outdoors.,1
"The injured employee was applying flammable, solvent-based adhesive on the roof. As he walked by another employee using a torch to dry the roof, the employee's clothes ignited. The injured employee then entered the area where the adhesive was being applied and a fire started. The injured employee sustained burns to about 80 percent of his body and was hospitalized.",1
"An employee was moving a fiberglass extension ladder along the side of a building when his foot became caught on a wooden stake protruding from the ground, causing him to fall. When he fell, his other foot became tangled between the first and second rungs of the ladder, and he suffered compound fractures of the right tibia and fibula.",1
"An employee was cutting neck bones with a saw when the employee's right thumb contacted the blade, resulting in an amputation.",1
An employee was standing in the bed of a stationary truck mixing cement with a pail and shovel. He fainted and fell from the truck bed. The employee was hospitalized for a concussion and subdural hematoma.,1
"An employee was cleaning debris around a laser cutting table with an air hose when the table shifted and he was caught between the bracket arm of the cutting device and a portion of the table. He suffered a laceration and fractured arm, requiring hospitalization.",1
"An employee became unresponsive due to significant dehydration and heat stress, requiring hospitalization.",1
An employee was hospitalized after an electrical explosion took place.,1
An employee was cutting open a bag of materials with scissors when they cut his right forearm.,1
"On August 15, 2018, around 3:00 PM, an employee was hit in the back of his head from a falling shackle. The employee was hospitalized.",1
An employee was cleaning and sharpening a deli slicer when the blade amputated her right index fingertip without bone loss. Cut-resistant gloves were not worn at the time of the incident.,0
"An employee was stocking cleaning carts in a supply storage area when some boxes fell off a shelf and struck her head and left shoulder, fracturing her neck.",1
"An employee was evacuating residents from a unit during a small fire when the employee inhaled smoke, requiring hospitalization.",1
"An employee was working in a grinding room, cleaning out a common line connected to two fat pumps. When he opened the inspection door on one of the pumps, hot fat blew into his face. He suffered second-degree burns to the face, both arms, the chest, the upper back, the neck, and the top of the head.",1
"While training another employee on swabbing techniques on a glass forming machine, an employee experienced cramping in the hands, legs, and stomach. The employee was hospitalized due to dehydration and a muscle injury.",1
"On August 15, 2018, at approximately 10:30 a.m., an employee was attempting to clear a jam in the feeding section on a box former machine when the employee's gloved hand was caught by the machine's shuttle carrier, causing injuries that required surgical amputation of the middle finger on the employee's left hand. The machine was guarded at the time of the incident.",1
"An employee was cutting pork chops when a bone became caught on the blade, causing the saw to buck. The saw blade then amputated her left index finger pad.",0
"An employee's right index finger was pinched between the rollers of a drawing compound roller coater machine, resulting in a finger amputation.",0
"An employee was using an extension ladder to reach a store roof when he slipped and fell, landing 10 to 12 feet below on concrete. The employee suffered broken bones in the lower extremities and was hospitalized.",1
"An employee was transitioning from an electrical pole to a ladder when he fell 20 feet to the ground, injuring his spine.",1
"An employee was walking at a residential construction site when he tripped at the front door entry threshold and fell to the ground, breaking a femur.",1
An employee was cutting wood stakes with a powered saw when it cut four fingers on his left hand.,1
"An employee was unloading the back of a triaxle truck when the tailgate would not lock due to excess material in the bed of the truck. He placed his left hand on the side of the tailgate and his right hand on the latch to open the tailgate. The tailgate opened briefly and then closed immediately, catching his ring and middle fingertips. As a result, his left middle fingertip was amputated.",1
"An employee was moving a pallet with a pallet jack. He was pinned between the jack and a pallet of cases behind him, suffering a compound fracture of the right lower leg.",1
"An employee was cutting a 16"" water main with a saw when the sawblade kicked back and cut his face on the right side.",1
"An employee was using a riding mule to move stock when he hit a bump and jammed his right hand and wrist on the handle bar. His hand later became swollen due to a possible infection, requiring hospitalization.",1
"An employee was loading a kettle up with asphalt to be pumped up to a roof when he became ill due to heat stress and dehydration, requiring hospitalization.",1
"An employee was operating a machine press and preparing to remove the fixture for a change-over when the hydraulic press came down on his left index finger, resulting in a finger amputation.",0
"An employee was cutting a tree branch while standing on top of a truck when he lost his balance, fell to the ground, and landed on his left side, fracturing his humerus.",1
"Two temporary employees were stacking plates of frozen food product. One  employee went to straighten a crooked plate while the second employee set another plate down, which smashed the first employee's fingertip between the plates. The first employee suffered a right middle fingertip amputation.",0
"While unloading freight from a semi-trailer, an employee fell off the back of the trailer to the ground below, suffering a broken rib and collapsed lung.",1
"An employee went to step onto the top of an H-pile (metal beam) to get a laser level from the other side when his foot was caught on an extension cord, causing him to fall onto the pile. The H-pile deeply lacerated his lower left leg.",1
"While climbing a ladder, an employee slipped and fell to the ground, landing on both feet. The employee suffered a fracture to the lower left leg and a compound fracture.",1
"An employee was holding onto a rack at a top cross member when his finger was caught between the rack and a pipe, resulting in a finger amputation.",0
"An employee ran to catch up to a truck and was attempting to jump on the truck's entry stair when he missed the step and fell to the ground. The truck then ran over him, causing fractures and other lower body injuries.",1
An employee was attempting the grab a black box that was going into a waste disposal truck's hopper when the hopper's blade struck and injured the employee's hand.,1
An employee tripped over a pallet while guiding a pipe being carried by a forklift. The pipe fell and struck the employee on the head and chest.,1
An employee slipped off the tire of a dump truck after finishing cleaning operations in the tub. The employee landed on the ground and sustained a fractured ankle and broken wrists.,1
An employee was stepping out of a vehicle toward a fuel pump when his foot slipped off the cement pad of the fuel island and he fell to the ground. He fractured his right leg and was hospitalized.,1
"An employee was trying to lift a bread sled off another one when his finger became pinched between the two sleds, resulting in a finger amputation.",0
"A spotter was directing a telehandler operator who was picking up an empty rack of piping. The operator picked up the load and did not see the communication from the spotter. As the operator was backing out, the spotter was crushed between the load and a parked trailer, fracturing his back.",1
"On August 16, 2018, an employee was bitten by a mosquito while delivering mail on his route, suffering a headache and illness that required hospitalization.",1
"An employee was walking near the front end of a store when she tripped/fell over a box, fracturing her tibia and fibula.",1
"An employee operating a 30-ton mobile crane was backing out down a hill when the brakes felt like they were not working, so the employee opened the door and exited the crane. He jumped approximately 6 feet and fell on his right leg at an odd angle, breaking it.",1
"On August 16, 2018, an employee was using a shovel to help a motor grader operator clean off the road in preparation for milling when he was struck by a dump truck, fracturing his right tibia and pelvis. He was hospitalized and had surgery.",1
"An employee suffered a fractured wrist, fractured pelvis, and bleeding in the head after running into a glass wall and falling to the floor.",1
"An employee was operating an automatic cutter. His hand was resting on the rail when the equipment was cycled. The blade returned and cut his left index finger, resulting in a fingertip amputation.",0
"An employee was mowing grass when they tripped over a hole, fell backwards and the mower was pulled over their left foot amputating the big toe.",0
"An employee fell to the floor while mopping it, breaking his right hip.",1
"An employee moved a belt that controls a rotating auger to clear a clog. When the clog cleared, the auger started up, pulling the employee's right hand into the auger and lacerating it.",1
"An employee was leveling out a mold when the employee slipped on hydraulic fluid and fell on a press bolt, injuring the upper right arm and requiring hospitalization.",1
An employee fell off a ladder and was hospitalized.,1
"An employee was loading pallets on a trailer with a single jack when the jack's forks became stuck on a dock plate. While maneuvering the single jack, the employee lost control of the equipment and ran into a conveyor system located nearby. 

The employee suffered a laceration to the left lower leg that became swollen, requiring hospitalization.",1
"An employee had changed a bearing on a fan (air handling unit) and was manually checking (rotating by hand) the tension of a drive belt he had reinstalled when his left hand was pulled between the motor and the drive belt pulley, resulting in a left ring finger amputation.",0
"An employee was wrecking a framework on a commercial construction building. As he was unclamping his harness, the anchor broke and he slipped and fell approximately 14 feet to the ground. He suffered a lacerated left eyelid, lacerated left knee, spinal fractures at the L1 and L2 vertebrae, and a hematoma of the bladder. He was hospitalized.",1
"An employee was unloading a trailer of freight into a store when he became dizzy and took a break. While drinking a sports drink in the shade, he immediately vomited and shortly after passed out. He was hospitalized for heat illness.",1
"An employee was preparing to burn off a wire spool when the spool fell. It struck the employee, causing a rupture of the right bicep tendon, a minor burn on the right palm, a bruise on the left knee, a traumatic hematoma of the upper right quad (thigh and knee), and a closed degloving lesion of the upper right quad (thigh and knee).",1
"An employee was troubleshooting a pneumatic valve located in the control cabinet of a jet mill. The employee had removed the presence sensor cable and was proceeding to remove the presence sensor when the pneumatic valve actuated and caught his right middle finger, resulting in a fingertip amputation.",0
"An employee was unloading eight boxes of frozen chicken using a dolly. As he was going down the truck's ramp, he lost his footing, let go of the dolly, fell on the ramp, and broke his right leg. He was hospitalized.",1
"On August 16, 2018, an employee suffered a muscle tendon strain in the upper right shoulder while moving a server cabinet that weighed approximately 800 pounds.",1
"An employee was on the roller bed of a band saw to re-measure the next cut that he was going to make when a steel piece (22"" x 26"" cross section and 7"" long) that was previously cut fell on him, fracturing his left ankle.",1
"An employee suffered a heart attack after excavating concrete, requiring hospitalization.",1
"An employee was using a hoist to lift a 4-foot long, 133-pound channel when the rigging on the hoist released, causing the load to fall onto his right arm. He was hospitalized with a fractured right forearm.",1
An employee triggered a pressure washer while the nozzle was pressed against the top of the injured employee's boot. The water blast penetrated the injured employee's boot and cut the top of the foot.,1
"On August 16, 2018, an employee was moving garbage bags near a dumpster when a waste hauler truck pushed the dumpster onto the employee's right foot.  She suffered severe injuries to her foot that required surgery.",1
"Two employees were trying to lift a container from an aircraft. One employee's hand was caught between the aircraft and the container, causing the amputation of the employee's middle, ring, and little fingers.",0
"On 8/16/2018, at approximately 12:30 p.m., an employee was on a trail installing a sign and pruning a hedge when he became lightheaded and passed out due to heat stress. He fell and injured his neck, requiring hospitalization.",1
"An employee experienced stomach cramps due to heat-related injuries, requiring hospitalization.",1
"An employee was unloading a container of merchandise at a receiving dock when he stepped on a nail in the container, puncturing his right foot.",1
An employee suffered a left middle fingertip amputation while attempting to clear product from inside the drain hole of equipment.,0
"An employee had stopped welding at a small part welding station and was walking around the table when he tripped on the welding leads and fell to the concrete floor, breaking his hip. He was hospitalized and had surgery.",1
"An employee was burned by liquid stock, requiring hospitalization.",1
An employee was standing alongside a conveyor placing pans on the belt when his left hand rested on a pneumatic rod that controls the tempo of production. The pneumatic rod retracted and caused an amputation to his left pinky finger. The rod was unguarded at the time of the incident.,0
An employee was using a 16-inch pop-up saw to cut pieces of lumber. The employee's left hand was between the saw guard and blade when the cycle button was pressed. The saw then amputated three fingers on the employee's left hand.,0
"On August 17, 2018, around 3 p.m., an employee was driving back to a postal station after delivering mail when she threw up and became nauseated. She was hospitalized for kidney failure, dehydration, nausea, and vomiting.",1
"An employee was connecting a hose to a production tank to transfer sulfuric acid when the acid released and contacted the employee, causing chemical burns to the lower extremities.",1
"An employee was repairing belts on a motor drive when a coworker started the motor. The employee's glove was caught, pulling the employee's right pinky finger into a pinch point between the belt and pulley. The employee's right pinky finger was amputated to the first knuckle.",0
"A Wescom employee was working near newly installed electrical panels when the panels were energized, causing an arc flash that burned the employee.",1
"An employee became dizzy and sick while working in a meat room, requiring hospitalization.",1
"After loading metals onto racks to be picked up by a crane for the anodizing process, an employee was standing idle when he was stuck by the control cab of the crane, which was about 4 feet above the ground. The cab of the crane pushed the employee into one of the support steel columns of the building, where he suffered a collapsed right lung and one broken rib. He was hospitalized.",1
"An employee was working under a truck when a coolant line ruptured. The coolant burned his chest, left arm, and stomach.",1
"After working all day, an employee became ill due to heat-related injuries and was hospitalized.",1
"An employee was in a scissor lift setting a truss for a T-hangar when the truss hit the scissor lift after becoming bound up on a column. The employee was ejected from the scissor lift to the floor as the lift overturned. The scissor lift then landed on the employee's face. The employee suffered multiple facial bone fractures; lacerations on the forehead, back of the head, nose, and face; a small brain bleed; a small fracture on the spine (C6); and a broken upper jaw.",1
"An employee was using a wheelbarrow to pour hot stone and rubber into a bridge plug joint when the wheelbarrow started to tip over. As he tried to stop it from falling, the hot rubber contacted his skin, causing a third degree burn to his right forearm between the wrist and elbow.",1
An employee was cleaning a weld with a 5-inch sander and was working in a tight spot when the sander kicked back and lacerated the employee above the left knee.,1
"An employee fell  4 feet from a rail car to the ground while opening the rail car door, breaking his left leg.",1
"An employee was assembling office furniture when the employee contacted the blades of an adjacent ceiling fan, sustaining a broken and lacerated nose.",1
An employee slipped on a wet floor and fell onto her right side causing a torn muscle with bleeding.,1
"An employee was saw-cutting a floor indoors for about one hour using a walk-behind concrete saw with an oxidation catalyst when he became dizzy, exited the building, and collapsed. He was hospitalized due to carbon monoxide exposure.",1
"An employee was removing product bags from a conveyor when his right ring finger entered one of the belt connection holes, resulting in an avulsion the right ring fingertip.",1
"An employee was using a battery-powered circular saw to cut material on a shipping crate when the saw kicked back and the blade made contact with his finger, resulting in a finger amputation.",0
"An employee was climbing up a ladder to a cargo loader to unload packages when he fell approximately 10 feet to a lower level, fracturing his right ankle.",1
Two employees were moving a one-man lift into a traveling position. The employees leaned the lift backwards 45 degrees in order to move it. The injured employee thought it was going to fall on him and he lifted his right leg to kick the lever down and his leg buckled causing the lift to fall on him. His left leg buckled resulting in a dislocated patella and torn ACL.,1
An employee was operating a feeder that laminates Styrofoam panels to produce garage door insulation. She was feeding the Styrofoam panels and sheets of film into the feeder when her glove was caught and her right hand was pulled into the machine. She suffered contusions and swelling of the hand and wrist.,1
"An employee was cutting a metal band from around lagging boards when the boards fell on him, pushing him into a metal beam. He suffered contusions and swelling.",1
"An employee was clearing a shelf when an air bag unit was knocked off the shelf, struck a car battery, and deployed, striking and fracturing the employee's lower leg.",1
"An employee was running a piece of machinery when his hand was caught in a feed wheel, cutting his right index finger and amputating his right middle fingertip.",0
"An employee was installing street lamps from an aerial lift bucket when a car struck the aerial lift's control panel. His right hand was then crushed between the bucket and structural steel, requiring hospitalization.",1
"On August 17, 2018, an employee was stepping over a rafter while holding a pneumatic staple gun when the gun hit the employee's right ankle and shot a staple into it. The employee was hospitalized and had surgery.",1
An employee was working on a locked-out cooling section of an exhaust fan. The employee's hand was caught in the nip point of a belt and pulley in the fan; the employee suffered an amputation of the right little fingertip and a broken right ring finger.,0
"An employee was attempting to de-burr a part on a lathe when his glove was caught in the rotating part of the lathe, causing his left index finger to be amputated.",0
"An employee was connecting a pillar cord into a cellar outlet when a short occurred, burning his left hand and left arm. He was hospitalized.",1
"An employee was standing on a step stool and attempting to grab an empty pot from on top of an oven when the step stool collapsed and slipped out from under her feet. As she was falling to the ground, her left hand grabbed a pot of boiling water from a stove below, spilling the contents on her body. She suffered third degree burns to her stomach, chest, left arm, elbow, and left hand.",1
"An employee was riding a horse to check the health condition of cattle in a pasture. The employee went to rope a calf when the horse slipped and fell. The employee's leg was caught in the stirrup as the horse was regaining its footing. The employee's leg  twisted, fracturing the tibia and fibula and requiring surgery.",1
"An employee was installing wooden blocks between liner plates and a steel rib when the employee's right middle finger was caught between the steel plate, the steel rib, and a wooden block, resulting in a finger amputation.",0
"An employee was working with two cylinders when the weight of the cylinders crushed the employee's first two right-hand fingers, resulting in two finger amputations.",1
An employee was at a public refueling station attempting to clean the windshield of an 18-wheeler after making deliveries when the employee fell and suffered a punctured neck.,1
"At approximately 11:15 a.m., on August 17, 2018, an employee was attempting to clear a powder buildup that was stuck in a dryer's rotary valve when the employee's right-hand fingers contacted the rotary valve, amputating the ring, middle, and pinky fingers. The rotary valve was not turned off and/or locked out at the time of the incident.",0
"A rolling crane was raising a bridge beam to move it to a trailer when the bridge beam became caught on another bridge beam, causing the other bridge beam to tip over and hit an employee in the area. The employee suffered significant lacerations to the right lower leg.",1
"An employee was attempting to put an aerator machine in a shed when he was pinned between the aerator and the wall of the shed, injuring his stomach area.",1
"On August 17, 2018, at approximately 12:15 PM, an employee was unloading a dairy truck. The employee had one foot on the truck trailer gate and one foot on the loading dock plate. The truck moved forward without notice and the employee fell through the area, breaking a leg and requiring hospitalization.",1
"An employee was working at the dock when a second employee who was using a dolly with approximately 30 pounds of furniture bumped her. She fell to the floor, fracturing her right knee and hip.",1
"An employee exited her car in the parking lot, lost consciousness, fell to the ground, and struck her head, requiring hospitalization.",1
An employee suffered a left index finger amputation while operating machinery. The machine was unguarded at the time.,0
An employee was using an overhead crane to attach a hydraulic rock clevis to a pad eye on a grinder tub when his fingertip was amputated.,0
"An off-duty employee felt ill and pulled his truck over in a store parking lot  to sleep in the cab. He was found unresponsive after falling in the parking lot, suffering head and rib injuries that required hospitalization.",1
"On August 18, 2018, an employee was cleaning the fryer room when another employee inadvertently sprayed the employee's eyes with a caustic gel cleaner.",1
"An employee was applying wax to the floors when he walked on the wax, slipped, lost his balance, and fell, hitting his head on 
a clothing rack before ultimately hitting the ground. He suffered a hemorrhage and laceration to the head.",1
"On August 18, 2018, an employee suffered a back injury while lifting heavy aircraft equipment onto a rolling cart. The employee was hospitalized and had surgery.",1
"An employee was helping a customer with a bow when his right ring finger was caught by the bow, resulting in a fingertip amputation.",1
"An employee was installing tooling on a gear blank that was supported by an overhead crane when the weight shifted, causing the gear blank to push the employee into the side of an adjacent machine. The employee suffered a broken nose, jaw, and scapula, requiring hospitalization.",1
An employee was pinched and amputated between a stand-up lift and racking in a warehouse.,1
"While descending stairs outside of a building, an employee missed a step, tripped, and fell on the stairs, suffering a fractured hip.",1
"An employee fell backwards into the side of a conveyor while walking up crossover stairs, suffering a broken tailbone.",1
"An employee was assessing a broken tree branch when another branch fell, striking and fracturing the employee's leg. The employee was hospitalized.",1
"An employee was sitting in the break room when she stood up and slipped on some water on the floor, falling to the ground on her left side and hitting her head on the table on the way down. She was hospitalized with a broken hip.",1
"An employee was walking when she tripped and struck both forearms on a desk. She fractured both arms, requiring hospitalization and surgery.",1
An employee's ring and index fingertips were amputated and the middle finger was crushed while retrieving dough from inside a dough divider.,1
"An employee was removing compost material from a bed, lost his balance and fell six feet to a lower level landing on a board. The employee sustained fracture ribs and other body trauma.",1
An employee was setting up a saw when the saw started while the employee's hand was inside. The employee received a serious laceration to the hand.,1
"An employee was straightening an extension cord when his feet became caught in the cord and he fell to the cement ground, fracturing his right hip.",1
"An employee was cutting plastic bands on a bundle of 36 sheets of plywood that was suspended about 3 to 4 inches on another bundle placed on a rail tram. The employee was standing on the ground while cutting the bands. A forklift driver moved the forklift and the plywood shifted. About 10 to 12 sheets fell onto the employee, causing him to sustain three fractures on the right leg and right ankle.",1
"An employee tripped over a curb and fell to the floor while walking, breaking two right shoulder bones and suffering minor scrapes on the right elbow and right knee.",1
"On August 18, 2018, an employee was cleaning a gymnasium after a summer graduation ceremony when the employee's right hand became entangled in a tarp that was being automatically rolled up by a tarp-rolling machine. The employee suffered a broken right forearm, requiring hospitalization and surgery.",1
"On August 19, 2018, an employee was trying to close a stuck valve in a milk house. The valve cut the top of the employee's left ring finger, causing a fracture and a fingertip amputation.",0
"An employee was repairing a tower master where cables come out of a bucket to load modules of dough into a trailer. He climbed into one of the buckets and a kink formed in the cable, which slid off a U-bolt and jerked, dropping  about 4 feet. Later, the cable came loose and the bucket fell about 25 feet to the ground with the employee still inside. He fractured his right foot and pinky toe and injured his vertebrae, requiring hospitalization.",1
An employee dismounted from the back of a trailer and fractured her leg.,1
"An employee was handling a concrete road barrier when an automated lifting bracket moved and crushed the employee's fingers, resulting in amputation injuries.",0
"An employee suffered from carbon monoxide exposure while inside a blood donation bus, requiring hospitalization.",1
"An employee was cleaning a conveyor when he tripped into the conveyor and attempted to brace his fall. As he did, his right hand entered the rollers and was crushed. The rollers were moving at the time of the incident.",1
"An employee was using an angle grinder when the tool kicked back and severely lacerated the employee's left forearm, causing tendon and muscle damage. The employee was hospitalized and had surgery.",1
"While repairing a brown stock washer, an employee was attempting to remove a tie rod from the packing with a come-along when the tie rod fell. The employee reached out to grab the packing and his right fourth finger was crushed between the tie rod and a hydraulic shaft, resulting in a finger amputation.",0
"An employee was attempting to clean a printing machine roller when the employee's finger entered a pinch point, resulting in a fingertip amputation. The roller was unguarded at the time.",0
"An employee was attempting to adjust a small pulley belt inside equipment when his left hand was pulled into the chain and sprocket, amputating his left pinky finger (below the middle knuckle) and left ring finger (above middle knuckle). The equipment was live at the time of the incident.",1
An employee was handling a domestic cat when it bit the employee's left hand.,1
An employee was placing the chute of a screw conveyor that weighed approximately 400 pounds when the chute dropped 3 feet and fractured his right foot.,1
"An employee was using a standup powered industrial truck to move a bundle of aluminum when the truck struck his left little toe, causing a contusion.",1
"An employee was cleaning a vat when she disconnected a water pipe and was sprayed by a 160-degree caustic solution, suffering burns.",1
An employee leaned back and fell off a 5-foot fixed rail ladder while cleaning blankets on a printing press. He suffered a laceration to the right side of his forehead and two cracked ribs.,1
An employee was standing on ladder reaching up to grab rods under the clamps. The rods lowered and pinched his thumb between the rod clamp and the rod rotator. The thumb was amputated below the second joint.,1
An employee was closing a flying cut-off saw door when his hand slipped and his right ring finger was cut in the pinch point created by the closed door. He suffered a partial amputation of his ring finger.,1
"An employee was using a sledgehammer to drive an 8"" railroad spike to secure a street road plate. As the employee struck the railroad spike into the asphalt, it ricocheted out and cut the employee's right shin.",1
"An employee was helping to change out the sump pump in a manure pit. As the employee attempted to step over the manure conveyor belt, the employee's foot slipped and the employee fell, fracturing the right leg and ankle. The employee was hospitalized and had surgery. The conveyor was moving at the time of the incident.",1
"An employee was on an 8-foot scaffold conducting a repair activity on a vessel when a hot substance shot from an opening in the vessel, striking the employee's face and causing second degree burns. The employee also fell off the scaffold and suffered a swollen right wrist.",1
"On August 20, 2018, a maintenance employee was positioning a broken log turner to prepare for welding when the log loader was actuated and broke the employee's right forearm.",1
An employee was stung by hornets and suffered an allergic reaction while removing brush outside the store.,1
"An employee was changing blades on a granulator. While he was rotating the blade assembly to check the top clearance gap, the front tip of his right pinky finger became lodged between the rotating blade and stationary blade, resulting in a pinky fingertip amputation (no bone loss).",0
An employee was operating a bulldozer in a pond where hydrogen sulfide had been detected by monitoring devices. The employee was found unconscious and required hospitalization. Personal protective equipment was not worn at the time.,1
"At approximately 3:45 p.m., on 8/20/18, an employee was changing roof anchors when he fell approximately 10 feet from the roof to the ground, spraining his ankle and fracturing his spine. He was hospitalized. The employee's fall protection was disengaged at the time of the incident.",1
"An employee jumped up to reach aisle blockers that were on top of an order picker. When she landed, she fell to the floor, injuring her hip and requiring surgery.",1
"An employee was walking around inside the building making sure that all doors were locked. As she walking towards the entry to the kitchen, she tripped and fell to the floor at the transition between the rubber tile and the ceramic tile, suffering a left shoulder dislocation, fracture to the left arm, and contusion to the left eye. She was hospitalized.",1
"An employee was adjusting the cover on an LED light when he contacted a live wire and was shocked, suffering electrical burns that required hospitalization. Gloves were not worn at the time of the incident.",1
An employee was attempting to extinguish a small fire on an exhaust dock machine when the employee experienced smoke inhalation and a sore throat.,1
"An employee was attempting a stunt that required him to roll off the wheel well of a tanker truck moving at 15 miles an hour and to be dragged. He bounced off the wheel well, causing his feet to hit first and flipping him upside down. His head struck the pavement and he was dragged a short distance as the truck he was tethered to came to a stop. He suffered head trauma, causing pressure in the brain.",1
"A temporary employee was attempting to plug in a computer into an outdoor weather-protected outlet. Upon opening the weather cover, he discovered hornets/bees inside. As he retreated from the insects, he tripped and fell into a vehicle, striking his face. He suffered a broken nose and bruises, requiring hospitalization.",1
"An employee was walking behind pack mules on a trail when a mule kicked the employee's chest, causing a contusion that required hospitalization.",1
"An employee turned to walk and slipped, twisting and fracturing her ankle in three places.",1
"An employee was repairing a piece of heavy equipment when a metal plate fell, pinching his right ring fingertip between the plate and the ground and resulting in a fingertip amputation.",0
"An employee was feeding chicken leg quarters into a skinner when the employee's fingertip was caught in the machinery, resulting in a fingertip amputation.",0
"An employee was moving a scrap bin with an overhead crane. As he was lowering the bin, a 20-inch diameter and 80-foot long pipe automatically kicked off of a conveyor into the area where he was standing. The pipe hit the bin and caused the bin to catch his right leg between the bin and a stationary table, fracturing it. He was hospitalized and had surgery.",1
An employee was pushing a rolling cart when she fell and broke her hip.,1
"An employee was attempting to climb into the driver's side of a pickup truck when his left foot slipped off the running board and his left hand lost grip of the handle inside the truck, causing him to fall to the ground and land on his back. He sustained five fractured ribs and a punctured lung, requiring hospitalization.",1
An employee was cleaning the blade to a microtome machine when it was activated via the foot pedal. The blade then amputated the employee's left fingertip. The machine was energized at the time of the incident.,0
"An employee was climbing a ladder when his hand slipped off a rung and he fell to the concrete ground below, breaking a hand and foot.",1
"On August 20, 2018, an employee tripped and fell while walking, suffering a wrist fracture and head contusion. She was hospitalized and had surgery.",1
"An employee was on a trailer at a loading dock helping to load some bags of merchandise when his foot went into the gap between the dock plate and the bay door, lacerating his left shin on the side of the bumper metal bracket that required stitches.",1
"An employee was hammering a steel wedge when a piece of metal flew off and lodged in his chest, requiring hospitalization.",1
"An employee was cleaning cake residue from an indirect contact cooler when he was exposed to 0.02 to 0.03 ppm of chlorine dioxide, aggravating his asthma.",1
"An employee was using a foot to set slips when the right foot was caught between slips and the rig floor, resulting in a partial amputation of the little toe.",0
"An employee was attempting to flip over a concrete column form using a tower crane to access and tighten the pipe braces on the bottom side of the form. His hand was on a partially suspended form when his left thumb was pinched between the form and the pipe brace, resulting in a partial thumb amputation (just below the first knuckle).",0
"An employee heated up a 500 mL bottle of violet red in a mug in the microwave. Upon removal, the heated glass bottle was shaken and shattered. The heated liquid contacted the employee, causing second and third degree burns to the face, neck, and right wrist.",1
"An employee had finished loading drywall from a truck onto two carts at a construction site when one of the carts started to roll and struck the employee, breaking his right leg.",1
"On 8/20/2018, an employee was operating an electric pallet jack when the employee turned a corner, crashed into a wooden pallet, and flew off the pallet jack, impacting the ground and suffering knee and leg injuries.",1
An employee was building a wooden crate with another employee. His arm moved forward at the same time that the second employee lowered the nail gun. The nail gun discharged upon contact with the first employee's arm. The nail entered the employee's right forearm.,1
An employee was stacking boxes of tile when one box fell on and broke his foot. He was hospitalized.,1
An employee was pulling a stock cart when the employee's right ring finger was caught and crushed between the cart and a pole.,1
"An employee was repairing an AC unit and had pumped down the refrigerant to the outside unit. His gauge read less than 0.1 psi and he therefore began to remove a joint using an acetylene turbo torch. However, a quantity of the refrigerant unexpectedly leaked under pressure and was ignited by the torch. This created phosgene gas, which the employee inhaled, causing coughing, nausea and irritation to his throat and lungs. He was hospitalized.",1
"An employee was trying to start a truck engine by adding fuel to the carburetor. There was a fire, and the employee suffered burns to the torso and left arm.",1
"An employee stepped backwards off a trailer lift gate and hit the ground, suffering broken ribs.",1
"At about 10:30 a.m. on August 20, 2018, an employee was measuring a steel bar stored on a storage rack. A 12-foot steel tube, on the rack below the steel bar, fell onto the employee's foot. The employee suffered a broken foot and toes.",1
An employee was de-clumping some material and feeding it through a chute when the chute's auger amputated part of his right index finger. The auger was unguarded at the time of the incident.,1
"An employee was using a chair dolly to remove stacked chairs from a box truck onto a loading dock. While backing out of the truck, his right foot stepped into a void off the right side of the truck. He then fell 4 feet off the dock onto a concrete curb and the chairs fell on top of him. He suffered three broken ribs on the right side, a cut to the forehead, and a nose laceration.",1
An employee was bending pipe on a tube bending machine when he attempted to adjust the tube. The tube bender then caught and crushed his left middle finger. The start button was activated at the time of the incident.,1
"An employee was rigging a crane with a panel. When the crane lifted the panel off the floor, another panel that was next to it fell on the employee, who suffered a broken leg and back fracture.",1
"An employee had just pushed meat across the roller and blade of a skinning machine when the roller grabbed the employee's skinning glove and pulled the employee's right index finger into the blade, lacerating it.",1
"An employee fell 15 feet off a roof to the concrete below, dislocating the right shoulder, fracturing the right elbow, and fracturing the right heel.",1
"On 08/20/18, after helping to locate, expose, and splice a fiber optic service drop to a customer's residence, an employee experienced heat-related illness and was hospitalized with lower leg swelling and heat stroke.",1
"An employee was attempting to clear a jam on the back side of a shaver box when he stepped over  the handrails and slipped, coming into contact with the shaver knives. His right foot was amputated and he was hospitalized. The shaver heads were not locked out at the time of the incident.",1
"On August 20, 2018, an employee sustained a back injury in the course of lifting activities at a job site.",1
"An employee walking up a grand staircase tripped on the upper step and fell onto the landing, suffering a left humerus fracture.",1
"An employee was tightening a chuck on a lathe machine when a bar slipped off and he fell backwards off a 5-foot platform to the concrete floor, fracturing his left ankle.",1
An employee was hit on the head by the cross beam on a racking system while bringing down furniture.,1
"An employee tripped and fell to the ground in an infant classroom, suffering a broken hip. The employee's head also hit the wall.",1
"On 08/20/2018, an employee was moving an unstable load stacked on a forklift truck when the truck began to tip over. The employee jumped off the forklift as it tipped and was struck by the load, which fell off the forks. The employee was hospitalized with back and spinal injuries.",1
"An employee backed into a safety pole while manually pulling a cart. The employee's right wrist was pinned between the pole and the cart, injuring it and requiring hospitalization.",1
"While carrying HVAC equipment on a roof, an employee walked over a foam board covering and fell approximately 18 feet through the rough opening of the skylight to a lower level floor. The employee broke both ankles and suffered a fractured vertebra.",1
An employee's shin was hit by a hammer.,1
"An employee was replacing a cable line on a pole when the pole snapped and the employee fell to the ground/pavement, injuring his shoulder, back, and hip.",1
"An employee was performing metal casting work with molten steel when molten metal spilled onto his right leg and into his boot, burning his foot. Leg protection was not worn at the time of the incident.",1
"An employee was standing on the ground observing pole line construction when he began showing signs of heat exhaustion, requiring hospitalization.",1
"Two employees were arguing in the break room when one of the employees punched the other employee in the face. The injured employee's chest later began hurting, and he suffered a heart attack.",1
"On August 21, 2018, an employee was climbing a step ladder to measure a house foundation when the employee fell from the ladder to the ground, suffering a broken rib and collarbone.",1
"An employee was walking and carrying a bucket of hot rubberized material when he tripped and fell over a propane tank line. The bucket hit the ground, causing hot tar to splash onto his arms and burn his skin.",1
"An employee was attempting to depressurize a threaded natural gas line. He continued to disconnect the pipe and a significant pressure release occurred, dislocating his left shoulder and bruising his right thigh. He was hospitalized.",1
"An employee was rigging up an isolation tool when he started to experience symptoms of heat exhaustion, requiring hospitalization.",1
"On August 21, 2018, a temporary employee was mounting a truck tire on a rim. The tire was too large for the rim; when it was inflated, a sudden release of contained air caused broken bones in the employee's right arm. The employee was hospitalized.",1
"An employee was clearing brush along a fence line using a mini excavator when a small branch fell onto the controls, pinching his finger between the control arm and the branch. His fingertip was partially amputated.",1
An employee was walking up a ramp to the office trailer when he rolled his ankle.,1
"An employee was using a core drill to drill into concrete when the drill bit became stuck, spun around, became airborne, and struck the employee in the head. The employee suffered a small fracture and was hospitalized.",1
"An employee suffered from extreme cramping and vomiting while tying rebar outside, requiring hospitalization for dehydration and heat illness.",1
"On August 21, 2018, an employee was operating a riding pallet jack when his foot slipped off the equipment. His right ankle was then crushed between a column and the pallet jack.",1
"An employee was cleaning under a mutton saw that had been shut off when the blade came into contact with her right index finger, causing a severe laceration. She was hospitalized. The saw was guarded at the time.",1
"An employee was arriving at his workstation when a flash fire occurred inside a plastic scrap recycling machine. He suffered burns to his left arm and shoulder area, requiring hospitalization.",1
"An employee was walking up the ramp to a flammable chemical storage room to empty a container of waste alcohol into a drum when the employee tripped over a 1-inch lip and fell to the spill containment floor, fracturing the right hip.",1
"An employee was clearing a jam on a shredding machine when his right hand was pulled into the conveyor belt, causing an amputation of his right pinky finger. He also suffered lacerations to his right ring finger, middle finger, and thumb.",1
"An employee had just lowered a steel mold to the floor using an overhead crane. He needed to disconnect the lifting chain ring that was attached to the crane and the hoist ring connected to the mold. He was grabbing the lifting chain to disconnect it when his right hand was caught between the chain ring and the steel mold, breaking two bones in his hand.",1
"An employee was performing an ergonomic push/pull meter evaluation while pulling a cart with meter straps when the straps broke away and he fell backwards, hitting the towing hitch of a tow-tugger. He suffered a fractured left leg and broken ribs.",1
"While attempting to clean out the inside of a bin, an employee stepped in the auger, which cut off the back of the employee's heel.",1
An employee was removing an overhead door during demolition-type activities when part of the door came down and injured the employee's finger.,1
"An employee was moving steel from a flatbed trailer when the steel flipped off dunnage on the trailer and rolled onto his right ring finger. The finger was pinched between the steel and the trailer, causing the amputation of the fingertip (with no bone loss).",0
An employee was standing in the store when a customer stabbed him in the back with a crowbar.,1
An employee was stacking slabs of granite when a slab fell over and broke his left leg.,1
"An employee had been applying coating to pipes for about 30 to 45 minutes when he became ill due to heat exhaustion, dehydration, and kidney failure, requiring hospitalization.",1
"An employee was walking into a supply closet when her lab coat became caught in the door and she began to fall. While falling, she attempted to catch herself and grabbed a door jam, lacerating her right pinky fingertip.",1
An employee was bitten by a rattle snake while cleaning out a flower box.,1
An employee fell 19 feet off a two-story residential roof to the concrete below during roofing activities. The employee suffered a broken arm and was hospitalized.,1
"An employee was clamping a cast iron gas meter housing unit into a hydrostatic test unit. While actuating the clamping mechanism, he was holding the body with his right hand. As the clamping mechanism was clamping, the cap on the outlet end (left side of the body) shifted. At this point, he grabbed the body and cap to prevent it from falling out of the testing machine. His left thumb then became caught between the cap and the hydrostatic test clamping mechanism, causing a partial amputation of his thumb tip.",0
"An employee was lifting tiles when he started to feel sick and nauseous due to a herniated and bulging disc in his back, requiring hospitalization and surgery.",1
"An employee was blowing down fish with an airline hose when he took a step back, lost his balance, and fell on a step located behind him. He injured his right rib and right lung.",1
"An employee was saw-cutting a concrete slab with an electric flat saw powered by a generator. The electrical cord was being run through an open doorway. A doorstop was holding the door open. Someone removed the doorstop, and the cord was crushed and shorted out, energizing the saw. When the employee touched the saw, he sustained an electrical shock to the right arm and torso.",1
"An employee was unloading freight/boxes from the lift gate of a straight truck while it was elevated when he fell and struck his head on the ground of the parking lot, suffering a head injury.",1
"An employee was greasing a waterwheel as part of minor servicing when his hand slipped and became stuck in the waterwheel sprocket, causing hand lacerations that required hospitalization and surgery.",1
"An employee was changing gloves while holding a drill when the drill trigger was pushed. The tool drilled into his left hand, causing a laceration and tendon damage to his pinky finger.",1
An employee was trying to retrieve a part that was not loaded correctly in a machine when his finger was pinched and lacerated between the part and a component of the machine.,1
"While making a delivery, an employee fell and suffered a possible amputation of the right pinky finger.",1
"An employee was working at a press when his right hand was caught between the press and a fixture he was bending, resulting in a partial amputation of his right ring finger.",0
"After checking material that was loaded in a tractor trailer, an employee was stepping off the truck when it pulled out. She slipped off the truck and fell 4 feet, breaking her left leg above the ankle.",1
"An employee was inserting a part into a CNC machine and lining up the cutting device when the machine started to rotate and caught the employee's finger, resulting in the amputation of half of the left index finger.",1
An employee was being trained on a wood chipper machine when a second employee switched the machine on. A piece of the blade that was attached to the blade assembly blew off and punctured the employee's right forearm.,1
"On August 22, 2018, an employee slipped on a wet floor and fell, suffering a broken hip. The employee was hospitalized, requiring surgery.",1
"An employee drove a roll-off truck to a landfill and was emptying a load when he noticed a hydraulic leak on one of the hoses. He was looking to see where the leak was coming from when the hydraulic stream hit his left index finger, penetrating his work glove and cutting his finger, which allowed the hydraulic fluid to enter his finger. He was hospitalized.",1
"On 8/22/2018, an employee was putting plywood down between two joists while laying floor decking when he stepped on non-secured plywood and fell through the gap between joists. He fractured his ribs, elbow, and left arm, requiring hospitalization.",1
"An employee was handling a 30-pound tube block to place on a trailer bed. In an attempt to keep the tube block from falling, his right thumb was caught between the tube block and the bed of the trailer, resulting in a right thumb tip amputation.",0
"A forklift struck an employee during sod installation, causing a broken foot. The employee was hospitalized.",1
"An employee was working on a rooftop air conditioning unit and changing a fuse when the fuse exploded, burning the employee's right hand.",1
An employee was working on the roof of a building when he began to feel overheated and experienced cramping in his hand. He was hospitalized for heat exhaustion.,1
"An employee was loading containers onto a vessel when his right thumb was caught and crushed between a 20' container's side wall and the outside corner casting of the container, resulting in a partial amputation of the right thumb tip.",0
"While operating a yard truck, an employee struck a stack of chassis and fractured the left tibia.",1
"An employee was grinding a piece of metal on a drum grinder when her glove became caught, pulling her hand into the grinder. She suffered a right middle finger amputation, fractured right ring finger, and fractured ulna.",0
"At about 3:10 a.m. on August 22, 2018, an employee was changing filters in a residence's attic. As he walked from one end of the attic to the other, he fell through the floor, landing on the floor about 10 feet below. He fractured his right foot and suffered a laceration to the right hand, and was hospitalized.",1
"An employee was cleaning a concrete block tank. The blade engaged, amputating the employee's right arm above the elbow and left hand except the thumb.",1
An employee was standing in line to check out for the day when he suffered a seizure due to dehydration and collapsed.,1
"An employee was cutting a banding on a bundle of pipes when the bundle rolled toward him and knocked him down, pinning his right leg beneath the pipes. He suffered a sprain to his lower right leg and ankle, requiring hospitalization.",1
"An employee was attempting to clear a jam on a rotary mill machine when the employee's fingers were caught in the running cutting tool, resulting in a left middle fingertip amputation.",0
"An employee tripped or slipped while running down the hall to respond to an emergency code on the PA. She fell and suffered a broken arm and wrist, bruised ribs, and a swollen face, requiring hospitalization.",1
"An employee was guiding a die-mounting plate that was suspended from an overhead crane when the crane's eye bolt broke, causing the load to shift and crush the employee's left hand.",1
A temporary employee slipped while mopping the floor and suffered a broken hip.,1
"An employee fell 10 to 12 feet from a roof to the ground while delivering roofing supplies to a residential location, suffering a broken pelvis and elbow that required hospitalization.",1
"An employee was operating a soil compactor when it rolled over. As a result, he suffered arm, collarbone, and rib fractures.",1
"An employee was working on a wood planer when a piece of wood became lodged in the rollers. The employee was attempting to remove the wood when the rollers pulled the employee's left pinky finger inside, resulting in a pinky finger amputation.",0
"An employee fell 6 feet off a straight ladder to the cement floor, fracturing both wrists.",1
"On August 22, 2018, an employee of Industrial Machining Services was replacing a valve on the tank cluster in an isolated work area. After the employee finished welding on the tank outlet cluster, the employee began to assemble the valve when an unknown hot water line sprayed the employee in the arm, resulting in second and third burns and a hospitalization.",1
An employee was attempting to clear a piece of steel out of a cutting press cutter when the cutting press was engaged via the foot pedal. The cutter then partially amputated his right pinky finger.,0
An employee suffered a partial right thumb tip amputation while trying to disengage an airline from a gear at a press infeed roller.,0
An employee was operating an electric pallet jack when the right side of her vehicle was struck by a clamp lift that was being operated by another employee. She suffered hip and back injuries.,1
An employee tripped while walking around a desk and fractured an arm.,1
"An employee was moving an articulating dump truck on a mat bridge when one of the tires caught the edge of the mat bridge and began to slide. The truck slid off the bridge and rolled onto its side. The employee suffered a punctured lung, fractured ribs, and a head laceration, requiring hospitalization.",1
"On August 22, 2018, an employee was attempting to unjam a manual blanking press when his  left hand was caught in the tooling, resulting in three middle fingertip amputations.",0
"An employee was responding to a request for assistance for a sick patient in a cardiac rehab outpatient unit. The employee was running to get towels when the employee's knee struck a bench. The employee then fell backwards incurring additional injuries. The result was a fracture of the left tibia plateau, requiring hospitalization and surgery.",1
An employee suffered heat exhaustion while delivering mail.,1
"An employee was working on a press part revolution clutch and attempting to reach the die when the die crushed her right hand, causing three fractures. The press was guarded at the time of the incident.",1
"After cleaning a patient's bathroom, an employee experienced shortness of breath and nausea due to exposure to bleach-based cleaner and isopropyl alcohol. She was hospitalized.",1
"While backing up an excavator, an employee reached out to pull in a mirror to avoid striking a telephone pole. The employee's hand was caught between the mirror and pole, resulting in fingertip amputations.",0
An employee was collecting trash when a razor blade protruded through the bag and severed his fingertip.,0
An employee was caught between a core puller (a hydraulic cylinder machine) and a quench table. His back and left hip were severely injured.,1
"An employee was on his hands and knees, doing maintenance work on a roof. He stood up, became dizzy and then fell off the roof, landing 12-15 feet below. He suffered broken ribs, a broken pelvis, a head contusion, and a cut to his right little finger. At the time of the incident, the employee's harness that was not tied off.",1
An employee was lifting the tongue of a pull behind mobile light tower when their right ring finger was pinched between the tower's tongue and the ground resulting in a fingertip amputation.,1
"An employee was helping to move a patient to another bed when he suffered severe pain due to a hernia, requiring hospitalization.",1
"An employee was helping remove a raised elevator basket when a chunk of debris fell from the basket to the ground, 70 feet below. The debris bounced off the ground and struck the employee's hand, causing an amputation to his ring and little fingers at the second knuckle.",0
"An employee was using a forklift to load a truck. The forklift ran over the employee's foot, fracturing the right ankle.",1
"An employee was installing new breaker hardware in existing panels. While the employee was wiring the hardware, crossed phases caused an arc flash. The employee suffered severe burns to his face, neck, and both arms and was hospitalized. The hardware was not shut down or locked out at the time of the incident.",1
"A roofer fell off the edge of a roof, suffering broken legs.",1
"A facility was evacuated. One of the evacuated employees was hospitalized, suffering from nausea and headaches suspected to have been brought on by leaking carbon monoxide.",1
An employee was painting steel beams from an aerial lift. The lift basket got caught on a metal beam while the lift was moving and when it freed the employee was thrown against another beam. The employee sustained a fractured shoulder.,1
"An employee fell down two exterior steps while leaving the facility, fracturing the right ankle and requiring surgery.",1
"An employee was attempting to change out a belt on a fan when his left thumb was caught between the belt and pulley, resulting in a thumb tip amputation.",0
"An employee was lowering a concrete pipe (weighing approximately 2,000 lbs.) into a trench when the pipe struck the employee. The employee was hospitalized with a fractured pelvis and ruptured bladder.",1
Two employees got in a fist fight. The injured employee broke his jaw in multiple places.,1
"An employee was preparing two 12-inch by 40-foot pieces of channel iron to be marked and drilled. The two pieces were on work stands; while the employee was moving them closer together, they fell over, bounced off the stands, and struck the employee's lower left leg. He suffered a fracture to the leg, just above the ankle.",1
"An employee was working on a meat stuffing machine when his finger was caught and pinched by a piston returning to its sleeve. He suffered a cut to his fingertip with tissue loss, requiring stitches.",0
"An employee was helping to steady a resin pump that was undergoing a troubleshooting test following maintenance on the pump. His finger entered the path of the pump coupling, which was moving up and down. When the pump closed, it pinched the his left index fingertip, resulting in a fingertip amputation.",0
"An employee was climbing a ladder with a 46-pound aluminum box frame. The frame hit a wall and began to fall; as the employee tried to stop it, he suffered a shoulder dislocation that required surgery.",1
"While stepping from a counter back onto a step ladder, an employee fell to the floor. She was hospitalized for knee surgery and to treat a head injury.",1
"An employee fell 11 feet, 5 inches through a roof hole opening to the next lower level, suffering back, rib, and head injuries. The hole was unmarked and unguarded at the time of the incident.",1
"An employee was cutting brass castings with a cutoff wheel when his left ring finger was cut, resulting in an amputation.",1
"An employee was using a forklift to stack two boxes when her right hand was caught between a box and the forklift forks, resulting in a right index finger amputation.",1
"After reporting to work at 7:00 a.m., an employee became lethargic and shaky at about 9:30. Suffering from possible heat exhaustion, he was hospitalized for testing related to a possible heart attack.",1
"An employee was stacking boxes when his gloved right index finger was caught in the strapping belt, resulting in a partial fingertip amputation.",1
"While discharging pressure from and testing a well head, an employee opened a steel valve fitting under 400 pounds of pressure. The fitting unscrewed and was ejected, striking the employee's lower right leg and breaking it.",1
An employee was helping to build a fence. He reached down to pick up some fencing material when a rattlesnake bit him on the right hand through his gloves. He was hospitalized.,1
"An employee was on the catwalk of a mixing plant at a completed well site. He was burned by a fire, centered on a forklift and a flowback tank that was releasing natural gas. He suffered second- and third-degree burns to his right hand and arm to the shoulder, his left hand, and his back on the right side. He also suffered second-degree burns to the right side of his face (excluding the eyes) and first-degree burns to his forehead. Personal protective equipment and flame-retardant pants were being worn, but not a flame-retardant shirt.",1
"An employee was servicing a truck from underneath when hot antifreeze/engine coolant poured onto him. He suffered burns to the face, arms, and chest.",1
An employee was cutting grass and was adjusting the wheel guard on the lawn mower when the blade cut his fingers.,0
"An employee was installing wire mesh on a second floor, about 20 feet high. He fell, breaking his right arm. A harness was not being worn at the time of the incident, and the employee was outside the area protected by a safety wire.",1
"An employee was removing a wire from a 480 VAC meter when the employee made contact with a live wire. An arc flash occurred, causing second and third degree burns to the employee's face, neck, torso, and left arm. Proper personal protective equipment was not worn at the time of the incident.",1
"An employee fell while stepping out of a manufactured home. The employee's hip struck the corner of a house jack during the fall, resulting in a fractured hip that required hospitalization and surgery.",1
"Two employees were talking near the machine one of them had been operating. A double pallet jack backed out of the adjoining aisle and struck one of the two, pinching his left leg/ankle against the other employee's machine. He suffered fractures to his left tibia/fibula.",1
"On August 23, 2018, an employee was attempting to repair a drain snake that was turned off. His little finger got tangled in the line and the tip was amputated.",0
"An employee was preparing to wash off a mower when he noticed a clump of grass on the mower deck. As he reached down to clean it off, the spinning mower blade struck his left ring finger, amputating the top 1/2"" portion of his finger.",0
An employee was sprayed by 180-degree process condensate water while attempting to remove a level puck from the side of a vessel he thought was empty.,1
"An employee was in a scissor lift welding a clip angle and needed to reposition the scissor lift for the next weld. While repositioning the scissor lift, his left hand was caught between the top rail and an existing pipe support, resulting in a partial pinky fingertip amputation.",0
"An employee passed out while having lunch in a packing shed, requiring hospitalization for dehydration.",1
An employee suffered heat exhaustion while working inside a tunnel pipe.,1
"An employee was pushing a cart, holding two fryers filled with hot oil, to a new position. Two of the cart's wheels broke off. Hot oil spilled onto the employee's lower left arm, causing first-degree burns.",1
"On August 24, 2018, an employee was servicing a conveyor when it pinched the employee's thumb, resulting in a thumb tip amputation.",0
An employee suffered heat-related stress due to dehydration while pursing a group of people.,1
An employee was operating a tandem gin pole truck to assist with a load when the front of the truck began raising up and slammed down to the ground. He then exited the truck and laid on the ground in pain. He was hospitalized with an L2 vertebra fracture.,1
"An employee fell to the cement floor while putting away a mop. The employee suffered a dislocated right knee, sprained right ankle, and broken right wrist.",1
"An employee was using a grinder when it caught onto his shirt and contacted his chest, requiring stitches.",1
"While in a manhole, investigating water complaints from cemetery visitors, an employee lost consciousness due to lack of oxygen.",1
"On August 24, 2018, at around 1:57 p.m., an employee was cleaning a line using a central vacuum system. She went to the discharge side of the system (where scrap barrels get changed out manually) and was reaching through the collar when she made contact with the rotary valve. The moving valve amputated her right index and middle fingertips.",0
"On August 23, 2018, an employee was training to use a coping machine. The employee's glove was snagged on a part, and the employee suffered a partial amputation of the right little finger.",0
An employee was standing on the tongue of a tractor trailer attempting to loosen the safety strap on a load of pipes when he fell 2 feet off the trailer to the ground and broke his hip.,1
"Employees were getting off the roof of a single-story home due to rain. While retrieving tools from the roof, an employee slipped on the wet panels and fell to the ground, about 10 to 12 feet below. He suffered a broken right ankle and was hospitalized for surgery.",1
"An employee was working on a drill rig floor, repairing a draw works cabling system. He began to suffer from illness due to the high temperature outside and was hospitalized.",1
"On August 24, 2018, an employee was bleeding out a line carrying cetyl 16-18 fatty alcohol. The material was frozen in the line; when the employee opened the bleeder valve, the hose blew off and struck him in the face. He suffered fractures of the hard palate and nasal spine and a lacerated gumline that required stitches.",1
"A Rozell Industries employee was working near a contractor who was using a stone wheel grinder when the stone wheel blew apart. The shrapnel hit and broke the employee's leg, requiring hospitalization.",1
"An employee was using a two-handed dolly to move stacks of totes to load into a trailer. The stacks weighed roughly 216 lbs. He picked up a stack, leaned back, and then dropped to the ground in extreme pain. He was hospitalized with a back injury.",1
An employee became ill while doing landscape work. He was hospitalized for possible heat-related illness.,1
"An employee was in a wash bay pulling a grate up to a drain when his right middle finger was caught in the grate, tearing off flesh from his fingertip.",0
"An employee was descending steps when he missed a step and fell to the floor landing, tearing his patella tendon.",1
An employee was opening a box with a utility knife and cut their left thumb.,1
An employee's leg was run over by the front tire of an aircraft in tow.,1
"An employee got dizzy while walking and fell, striking her head against the wall and suffering two fractures to her left foot.",1
An employee was attempting to manually adjust a printing press when the machine amputated her right ring finger down to the first knuckle and lacerated her pinky finger.,1
An employee was walking beside a stand-behind trencher as it dug a trench. The cutting chain pulled in one of his shoelaces and severely lacerated his lower left leg. The chain was guarded at the time of the incident.,1
"A flowback operator was cutting a hole in a 55-gallon poly drum. The knife closed on his left little finger, cutting it. He was hospitalized; the finger was amputated.",1
"An employee was on top of a catwalk to gauge the oil. He opened the thief hatch and fell approximately 13 feet to the ground, suffering multiple broken ribs, a lacerated spleen, a hip injury, and a pelvic injury.",1
"An employee was manually feeding dough into sheeting rollers when his right hand was caught and crushed between two rollers, resulting in index, middle, and ring finger amputations.",1
"An employee was moving a spooling machine when it tipped over, smashing and breaking three of the employee's fingers.",1
"An employee was aligning/guiding a workover rig onto a well-head using a spacing cable when his left ring finger was caught between the spacing cable and the rod blowout preventer, resulting in a fingertip amputation.",0
A crew was stretching a strand that was part of a concrete product when the strand broke and punctured the injured employee's left cheek area.,1
An employee was moving rebar with an overhead crane. The rebar shifted and smashed two fingers causing partial amputations to both fingers.,0
"An employee was descending from a 6-foot ladder when he missed the second step from the bottom and fell to the floor, landing on and breaking his hip.",1
"An employee was observing the hoisting of a steel roof beam. As the crane was setting the beam down so its rigging could be tightened, the beam fell out of the rigging, hit the ground, rolled, and struck the employee. It broke his left ankle and lacerated his right foot.",1
"An employee was operating a joiner saw. While the employee was pushing a board on the saw, the employee's left hand slipped into the guard and touched the blade, which amputated the middle fingertip. The employee was hospitalized.",1
"An employee was in a scissor lift welding lintels. The scissor lift platform was struck from below by a moving personnel hoist crushing the employee into the ceiling. The employee sustained a fractured arm and wrist, a collapsed lung, a blood clot in the lung, and kidney damage.",1
"While an employee was sanitizing hard candy tumblers, a bucket of sodium hydroxide cleaner spilled and the chemical splashed onto the legs of his coveralls and jeans. It soaked through, burning his knees. He was hospitalized.",1
"An employee was moving a piece of steel to its landing position when his left fourth digit fingertip was caught between the steel and its landing position, resulting in a fingertip amputation.",0
"An employee was picking up one end of an 80 lb. steel plate to be moved when the employee's thumb was caught between two steel plates, causing a sheering action that resulted in a right thumb amputation.",0
"An employee had just changed a winder. As he started the winder back up, his finger was caught in the spinning winder, resulting in a fingertip amputation.",1
"An employee was working to free a press feed that became stuck when hot plastic resin contacted the employee's left hand, causing a second degree burn to the palm and fingers. Personal protective equipment was not worn at the time of the incident.",1
"An employee was climbing down a chain-link fence when he slipped and fell about 20 feet to the ground, breaking his ankle and requiring hospitalization and surgery.",1
"An employee was closing a dock door when a rope caught his foot and he fell to the ground, breaking his ribs.",1
"While walking down the steps outside a residence, an employee tripped on the middle step. The employee fell forward, suffering a broken left forearm, and was hospitalized.",1
"An employee was using a rag to lubricate a pulley when the rag was caught in the pulley chain, resulting in his finger being caught between the pulley chain and conveyor wheel/gear. His right index finger was partially amputated. The pulley was not locked/tagged out at the time.",1
An employee was chopping vegetables with a knife and amputated her left thumb tip.,1
"An employee was working on a slide gate at the bottom of a ladle. The employee was lancing the bottom of the ladle to open it up when the oxygen lance leaked oxygen into his glove. A spark then ignited the glove on the employee's left hand, burning it.",1
"An employee was working on a cable for an aircraft door. The employee noticed the cable was sticking out while another employee was closing the aircraft door. The employee attempted to quickly insert the cable before the door fully closed, and the door closed on the employee's finger, resulting in a left index finger amputation below the first knuckle.",0
"An employee stepped into an open trench filled with hot water, suffering third degree burns on his legs/feet. The trench did not have a protective grating at the time of the incident.",1
"An employee was attempting to remove a chunk of lime from the rotary vein of a silo's rotary valve when the rotary vein pulled his right hand into the valve, resulting in a partial right little finger amputation.",0
"While taping an aluminum reverb, an employee believed that molten metal was over-flowing the trough and melting oxygen lines on the floor. The employee then jumped over the handrail of an elevated work platform and fell approximately 5 to 6 feet to the floor below, injuring his left elbow and fracturing the left side of his hip.",1
"An employee was waiting in his vehicle for a beverage delivery truck to arrive at the parking lot of a convenience store. The employee's job was to stock merchandise at the convenience store. While waiting in his car, he was shot twice in the chest by a gunman.",1
An employee was mixing chemicals for a pool when he breathed in fumes that burned his throat.,1
An employee was reaching over a pizza conveyor. The employee's glove was caught between the conveyor and metal plate the conveyor rested on. The belt removed the employee's fingernail; the fingertip was later amputated.,0
"An employee was working between two stacks of concrete posts spaced approximately 2 feet apart from one another. Each stack of posts had a total of two 12-foot long concrete posts, with the first stacked on a 4""x4"" piece of dunnage. There was another post stacked on top of that with a 5"" high piece of dunnage separating the two posts. As the employee was patching the posts, the 4""x4"" dunnage on the bottom of the stack gave way and caused the stack to fall forward. The employee was pinned between the front stack of posts and the stack that fell forward. The employee's mid-section (front and back) was pinned for a few minutes until a forklift operator could push the stack off the employee. The employee was hospitalized for contusions to the upper body.",1
"An employee was hunched over cleaning up debris from the floor using a small shovel when a nearby forklift started backing up. The forklift driver did not see the hunched over employee and ran him over. He suffered a broken left ankle and a fractured right ankle and foot, requiring hospitalization.",1
"An employee fell off his truck to the ground while getting bars and chains to tie down his load, fracturing a leg.",1
"On August 27, 2018, an employee was delivering mail when a dog broke through a screen door and attacked the employee, biting the employee's lower right calf.",1
"An employee was attempting to adjust a chain on a utility pole when the pole moved back into a hole, catching the employee's right thumb between the pole and chain. The employee suffered a thumb tip amputation when he pulled his hand out of the pinch point.",0
"An employee's left thumb, first finger, and second finger were crushed by a crane outrigger jack cylinder and the storage channel on the crane frame resulting in an amputation injury.",0
"An employee was walking by a stack of drywall when the drywall fell on her right leg, breaking her tibia and fibula.",1
"An employee was in a warehouse, using an electric pallet jack to move a pallet. The pallet jack struck and fractured her right ankle.",1
"A temporary employee operating a cutter machine was changing out the foam sizes when his right hand entered the equipment and contacted the cutter blade, amputating his middle and ring fingers at the end of the nailbed. The equipment was locked out at the time.",0
"On August 27, 2018, an employee was working in a dumpster when he attempted to run out of the dumpster and rolled his foot on debris, twisting and fracturing his right ankle.",1
An employee was working on an irrigation pivot when a rattlesnake bit his right shin.,1
"An employee was attempting to place four steel hand carts in the back of his truck when two of the carts contacted his right middle finger, resulting in a fingertip amputation.",0
"An employee was walking near a tug that was pulling a dolly with a DQF when the DQF slipped off the dolly and struck her arm, breaking it.",1
"An employee slipped and twisted his right ankle while attempting to carry a 50-pound bag of seed, fracturing his fibula and tibia.",1
"An employee was using a walk-behind mower equipped with a velkie to mow a parking lot island. He stopped the mower to wait for someone to park. He was then attempting to move away from the mower when the machine started to spin, striking and throwing him to the ground. He was hospitalized with a fractured right femur and right ankle.",1
"While sorting packages, an employee tripped over a crate on the ground, dislocating her right shoulder and fracturing her collarbone.",1
An employee fell from a fixed ladder onto a concrete floor while retrieving product from a loft and suffered a fractured skull with neck and back injuries.,1
"An employee was collecting sweeps when he opened a gut line that was pressurized and the elbow failed, dislodging and hitting his back. He suffered the loss of his spleen and a collapsed lung.",1
"An employee was letting air out of a shaft with his finger when a second employee engaged the roll handling trolley. The first employee's finger was pinched between the core of the roll and the shaft, resulting in a left middle fingertip amputation.",0
"An employee was collecting samples and his left hand entered a peach when the winch moved, resulting in a left index fingertip amputation.",0
"An employee climbed onto the fourth story roof of a multi-family structure to begin installing flashing around chimneys. As he stepped to connect his lanyard to a lifeline, he slipped on synthetic felt covering the roof and fell approximately 30 feet onto a porch overhang, before falling  about 10 more feet onto a concrete driveway. He was hospitalized with a fractured upper front right rib, a laceration to the back of the head, a concussion, and abrasions to the face.",1
"An employee fell on a sticky floor, suffering sore knees and a scrape/cut to the forehead above the eye. He was hospitalized.",1
An employee was delivering mail on a walking route and suffered heat-related symptoms. The employee was hospitalized for heat stroke.,1
"On August 27, 2017, an employee received an amputation just below the left elbow while operating a machine used to fabricate holes for forklift forks (double notcher).",0
"While walking in a foyer, an employee tripped and fell to the floor, breaking a hip.",1
An employee was walking next to a milling machine when it ran over his right foot. Amputating his foot and ankle.,0
An employee was placing caps on the tank openings. A forklift struck the tank and the employee fell about 20 feet to the ground below. The employee's fall protection was not attached to the anchorage point.,1
"On August 27, 2018, an employee was lifting a steel coil with a crane. The coil shifted and swung, and the employee's left little finger was pinched between it and the wall. The employee suffered a partial amputation.",0
"An employee was loading the rear end of a garbage truck with cardboard. When activated, the rear loader smashed his fingers. The tips of his left middle and ring fingers were amputated.",0
"An employee was feeding material into a machine when a hook struck his face, causing a fracture.",1
"An employee was washing an oil and gas drilling rig when he experienced heat stress and cramping due to dehydration, requiring hospitalization.",1
"An employee was exiting a moving shuttle wagon. As he landed, his leg made contact with uneven ground, causing an injury to his left tibia.",1
"An employee was running a cable through trees when he came in contact with overhead powerlines, suffering second degree burns on his wrist.",1
"An employee's hand touched the paddle blades on a blower motor, amputating the nail and distal phalanx of the right, index, middle, and ring fingers.",0
An employee was installing a cast iron pipe when the pipe fell and amputated his right thumb.,0
"On August 27, 2017, an employee inside a powder spray booth was reaching out to touch the controls when the employee fell approximately 6 feet below, breaking the left hip.",1
An employee was feeding putty into the hopper of a putty machine. The machinery amputated the employee's fingertip.,0
"An employee was using a hook to unjam the discharge auger of a meat blender. The auger actuated, pinning his right hand in the discharge chute and impaling it.",1
"An employee's hand was slammed in a bulldozer door as he left the vehicle. The employee's right ring and little fingers were injured; at the hospital, the tip of the little finger was amputated below the first joint.",0
"An employee was loosening a bolt with a wrench when his little finger was trapped between the wrench and concrete. His fingertip was smashed, and he suffered an amputation.",0
"An employee was cleaning a trash chute when the chute door closed on his left pinky, fracturing it.",1
"On November 8, 2018, an employee was electrocuted while trying to cut an electrical line associated with an electrical panel. He was hospitalized.

On August 28, 2018, an employee was reaching for a pair of tongs when a dish rack caught her clothing. She fell, breaking her right arm.

Note to user: This record contains two separate events that were reported simultaneously to OSHA by the employer.  These events are captured as one report.",1
"An employee was breaking down a pump trailer while standing on a platform approximately 3 feet above the ground when the employee turned and fell off the platform to the ground, suffering shoulder and rib fractures.",1
"An employee was cutting deck boards with a power saw. The saw cut the hand he was using to secure a board, severing the ring fingertip just above the end joint and lacerating the index and middle fingers.",0
"An employee was in a maintenance shop, working on a pump that had been removed from a processing line. As the employee rotated the pump by hand, their right little finger was caught between the impeller and the pump housing. The fingertip was amputated.",0
"On August 28, 2018, an employee was traveling backward on a stand-up forklift with no load when he turned a corner and crashed into a bollard next to a dock door. His leg was pinned between the truck and bollard, requiring hospitalization and surgery.",1
An employee became light-headed and suffered an asthma attack while delivering mail. Heat may have been a contributing factor.,1
"An employee was working at a residential construction site when he fell from a window opening to the ground, breaking a femur.",1
An employee was installing a gas line to a residence and felt lightheaded possibly due to the heat.,1
An employee was driving stakes for formwork when he started experiencing cramps throughout his body. He was hospitalized for severe dehydration.,1
An employee became lightheaded due to heat-related illness and fell to the ground while exiting a work vehicle.,1
"An employee was bringing trash down a stairwell when he stumbled and fell down five steps, landing on his head. He suffered bleeding in the brain, a fractured cheekbone, and swelling on the right side of his head and eye.",1
"An employee was carrying debris down the stairs when he stumbled and fell down five stairs, striking a door/door jamb on the ground level. He suffered a head contusion, left eyebrow laceration, and right eye/facial swelling.",1
An employee was trying to connect two baggage carts. The connecting bar amputated the employee's right ring finger.,0
An employee was moving steel plates and lacerated his pinky finger.,1
"An employee was using a circular handheld saw to cut a wood midrail from a guardrail system. While cutting at a downward angle, the employee lost control of the saw, which then lacerated the employee's right thigh.",1
"An employee was using a laser to align two pulleys. As he moved from being on one knee to standing, he placed his left hand on a free-wheeling V-belt near the pulley. The belt moved and pinched his finger in an upper nip point at the pulley, resulting in a partial amputation of the left index finger.",0
"An employee was driving a golf cart. As the cart turned onto a road, a resident's vehicle struck it and it rolled over. The employee suffered foot, wrist, and ear injuries. The employee was hospitalized.",1
"An employee became ill due to heat stress while performing masonry work on a manhole, requiring hospitalization.",1
"While walking near stacked pallets, an employee caught his foot and fell, suffering broken ribs. He was hospitalized.",1
"An employee was straightening an 8-foot long board on a conveyor when his finger became pinched between the board he was moving and a board underneath. As he pulled his hand back, his left index fingertip was partially amputated.",0
"An employee was lifting a small dump trailer with a teammate. They set the trailer's tongue down on a block and the employee's right index finger was pinched between the tongue and the block, resulting in a fingertip amputation.",1
An employee was preparing to change a lock when the employee was shot in the back.,1
"An employee was unloading mail from the back of a truck when he lost his balance and fell approximately 4 feet off the lift gate to the ground, lacerating his scalp, right ear, and right ankle. He was hospitalized and had stitches.",1
"An employee fell to the ground while breaking down boxes, suffering a broken left femur. He was hospitalized.",1
"An employee was moving a 78-pound boxed item to a ladder from a stocking shelf about 9 feet 7 inches above the ground. The employee fell from the ladder to the ground, suffering a bruised lung. The employee was hospitalized.",1
"An employee was conducting a safety walkthrough of the parking lot when she was struck by lighting, suffering burns to both legs, her arms, and her chest. She was hospitalized.",1
"An employee was closing a valve at a berth manifold when the employee fell from a walkway, suffering fractured ribs and contusions. The employee was hospitalized.",1
"An employee was emptying trash cans when he approached a trash can that was behind the support bracing for an overhead crane. He stepped over the support bracing and his left foot was caught on the bracing. He then lost his balance and fell, fracturing his right hip.",1
"An employee was helping a customer load a product when he tripped over a sidewalk, injuring his knee on the ground. Feeling dizzy and short of breath, he was hospitalized.",1
"An employee was operating a knuckle boom crane with hand controls when the chain became loose, dropping a truck bed that hit and broke the employee's hip.",1
"An employee was in an aerial lift parked in a ladle transfer lane, diagnosing a mechanical issue with an empty iron ladle that would not move up and down. Another empty ladle struck him, briefly trapping him inside the lift basket. The heat coming from the ladle's heat shield burned his chest and forearms. He was hospitalized.",1
"An employee was placing an empty wood pallet on 55-gallon drums when a nail, protruding from the pallet, tore through his finger. The fingertip was amputated.",0
"While unwrapping a product that was on a pallet, an employee tripped on a strap laying on the floor and broke the upper right arm.",1
An employee was injured when a steel die fell on his foot.,1
"An employee was holding a release handle for a lifting device on the overhead crane when the load shifted, resulting in a puncture and fracture to the employee's right hand.",1
"An employee was disconnecting a braided metal flex hose that was supplying air to a furnace for the de-coking process. A supplier sent an alternate feed to the furnace, which required the furnace to remain online. The employee went to disconnect the flex hose from the furnace and received second degree burns to the face and first degree burns to the torso from steam/hot condensate. The line was not depressurized at the time of the incident.",1
"An employee was standing on a pallet while retrieving apparel boxes. As she turned around to dismount the pallet, her foot was caught on a piece of plastic and she fell to the floor. She landed on and broke her left shoulder.",1
"While helping to rethread a paper machine at the dryer section, an employee suffered heat symptoms including cramping and difficulty breathing. The employee was hospitalized for heat stroke.",1
"An employee was guiding a load of drywall onto an upper floor. His left hand was caught between the load and a wire rope midrail, and the little finger was amputated.",0
"An employee was forming parts on a press brake when his left thumb was caught and crushed between the top and bottom die, resulting in a partial amputation of the left thumb.",1
"An employee was moving an axle into position when it shifted, crushing his left middle finger against the springs. His fingertip was amputated.",0
"An employee fell to the ground in a parking lot, breaking her elbow.",1
"A Border Patrol agent was thrown from his horse while on patrol. He suffered a broken skull, broken ribs, and a dislocated hip.",1
An employee slipped on a wet road as he approached a leaking hot tar kettle. Hot tar burned 40 percent of the surface of his hands.,1
"An employee stepped off the counterweight of a crane and fell 6 to 8 feet to the ground below, suffering back and rib injuries.",1
"An employee was training another employee on how to light the back part of a paver and set his butane torch down on the paver. When the paver was later started, its doors closed on the torch, causing it to bend, be punctured, and blow up, at which point the employee jumped from the paver. He suffered burns to both arms, his nose, and forehead, as well as a possible broken left heel.",1
"An employee was installing an electrical box when the employee's foot was caught between a free spinning turbine and the counterweight and main bearing of a piece of machinery, causing the amputation of five toes.",1
"An employee was attempting to remove a compressed can from a can crushing baler machine when the equipment's retaining pin malfunctioned and became loose, allowing the head plate to fall and crush the employee's right hand. The employee's right hand was fractured.",1
"An employee was part of a crew that was attempting to remove a Christmas tree from a well head when a high-pressure release and blowout occurred. The Christmas tree fell on and broke the employee's leg, requiring hospitalization.",1
An employee was opening a wooden crate with a rubber-handled claw hammer when his hands slipped off the hammer handle and the rubber end of the hammer struck his face. He suffered a left cheek laceration.,1
"An employee was walking through a facility conducting an inspection when a forklift operator came around a corner and struck the employee, who then fell onto aluminum billets stacked on the floor. He broke his left leg and right shoulder, and he required stitches on the back of his head.",1
"A maintenance mechanic was welding a piece of furnace structure with a portable welding machine when he fell forward. He came into contact with a hot object, possibly a welding rod, and suffered a minor burn and bruising to the right eyelid. He hospitalized.",1
"An employee was walking from a production floor to a break area when she tripped and fell, breaking her wrist, forearm, and collarbone.",1
"An employee was installing starter shingles on a single-story home. He fell from the roof to the ground, about 10 feet below. He suffered internal bleeding and fractures, and was hospitalized.",1
An employee was adjusting a valve when the metal hinged door of a tank cage smashed his right thumb. The tip of the thumb was amputated.,1
"An employee was filling boxes under the chute of a ribbon blender when his hand entered the chute and was pinched in the machinery, resulting in a right hand amputation. The ribbon blender was in operation at the time of the incident.",0
"An employee was lowering a pipe stabilizing tool called a ""slip"" into a drill hole/floor hole. As the drill was being lowered into the slip and drill hole, the employee's right foot lost traction and moved underneath the slip. The drill then entered the slip, which caused the slip to move and crush his right foot. His right big toe was severed at the first knuckle.",0
"An employee was taking the gate off of his flatbed trailer to deliver supplies when his left middle finger was caught between the gate and the truck, resulting in a fingertip amputation.",0
"While making a delivery, an employee was attacked by three dogs belonging to a customer. The employee was bitten, suffering lacerations and puncture wounds, and was hospitalized.",1
"An employee was cleaning an area in and around a heavy piece of equipment (machine removes products from a pallet and moves them to a conveyor belt) when the machinery lowered and crushed him, causing abdominal/internal injuries. The machinery was in motion at the time of the incident.",1
"An employee suffered heat exhaustion while cooking over an outside grill, becoming nauseated and pale. The employee was hospitalized.",1
An employee was helping to take apart drilling equipment when an electrical arc hit a boom she was touching. She was hospitalized.,1
A temporary employee was pouring hot metal at a foundry when he began suffering from cramps. He left work and was hospitalized for dehydration.,1
An employee was driving a pallet jack toward a cross aisle when he collided with a forklift and broke his ankle.,1
"An employee was on a scaffold, spray-painting the awning of a building. The scaffold began to roll; the employee fell from it to the sidewalk 8 feet below, landing on his back and suffering two broken wrist bones and a broken pelvis.",1
"An employee was dismantling a lubricant barrel with a torch when it exploded. The explosive force blew out the bottom of the drum, which flew up and struck the employee's face, smashing the welding helmet he was wearing, sending him backwards, and causing him to hit his head on the concrete floor. He suffered facial lacerations, a skull fracture, and bleeding on the brain.",1
"An employee was performing MIG welding on the bottom outside part of a vessel when the employee appeared to be electrocuted, requiring hospitalization.",1
"A piece of pipe slipped while being set down in a cradle and struck and employee's foot, injuring it.",1
"An employee was attempting to clean an ink spill on a belt using a rag when a second employee jogged the belt and the first employee's rag became caught in the belt. As the first employee attempted to grab the rag, the employee's hand and fingers were caught in the belt, resulting in broken fingers and lacerations. The belt was not locked/tagged out at the time of the incident.",1
"An employee was unchaining a sprayer from a trailer. As he released the last chain binder, its handle hit him in the chin and he fell, landing on his hip and breaking his left femur.",1
"An employee was installing a ground rod with a sledge hammer when the shaft of the handle pulled away from the ground rod, came down, and pinched his right thumb. His thumb was lacerated and required stitches. He was hospitalized after having an allergic reaction to antibiotics.",1
"An employee was working on a lift when the employee's left thumb was pinched between pieces of metal, resulting in a thumb tip amputation.",0
"As an employee was stacking steel beams, a top beam rolled and pushed the other beams, which fell onto and crushed the employee's left ring finger. The fingertip was amputated.",0
"An employee suffered dehydration while collecting trash, requiring hospitalization.",1
"An employee was struck by precast concrete that was hoisted by a crane, suffering a dislocated left knee.",1
An employee's right hand entered a machine and was amputated.,1
"An employee was troubleshooting a pipe machine when it malfunctioned and cycled, catching him in a pinch point and injuring his right hip.",1
"An employee was unhitching a welding trailer from a buggy. As the trailer hitch released, his left thumb was crushed between the hitch and the buggy bumper. The thumb was amputated.",0
"An employee slid a bowl of hot butter, which splashed and burned the employee's left forearm.",1
"An employee was cleaning a cam shaft on a pin setter when the employee's rag and left index finger became caught in the machine, resulting in a finger amputation. The machine was not locked/tagged out and was energized at the time of the incident.",0
An employee was placing plastic film on top of a textile baling machine. The baler was activated and its top plate crushed the employee's right hand. The employee was hospitalized.,1
An employee fainted possibly due to heat and fell to the floor.,1
An employee was carrying trash to a compactor when a forklift backed up over his right foot. His foot was crushed and required hospitalization.,1
"Wind below a door shut on an employee's left index finger, resulting in the amputation of the fingertip.",1
An employee was burned on the hand with hot water while cleaning her work area.,1
"On August 29, 2018, an employee slipped on a wet floor and suffered a broken femur.",1
"On August 29, 2018, at 9:36 a.m., an employee had just returned a two-step stool to its storage location after using it. When she turned around, she tripped on the stool and fell on the floor. She was hospitalized with a bone fracture.",1
"Two employees were moving two pin protectors to another location to weigh them. They were trying to stand the two pin protectors up on end to secure them to a forklift with a chain and bolt. As they stood the pin protectors up, they attempted to pull slack out of the chain. One employee accidentally bumped heads with the injured employee, which caused him to stumble and lose his grip as he put his hand on the ground to balance himself. At that point, the pin protectors fell over onto his finger. He immediately pulled his hand out from under the pin protector, resulting in a right ring finger amputation.",0
"An employee was placing a piece of metal into a welding fixture. His left ring finger was pinched between the metal and the fixture, and the tip was amputated to the base of the nail bed.",0
"An employee was working on a raised platform, tightening a pipe with a pipe wrench. As he was pushing the wrench forward, the wrench slipped, which carried him forward and caused him to fall approximately 3 feet. He fractured his right femur. The platform did not have guardrails at the time of the incident.",1
"An employee tripped and fell into a molding machine opening. The machine's knives injured his hand, exposing and cutting two tendons. He was hospitalized.",1
"On August 29, 2018, an employee was using a threading machine on a 1-inch by 10-inch steel pipe. The pipe holder actuated while the employee's right hand was on the pipe, crushing the employee's right index finger. The employee was hospitalized.",1
An employee's glove was caught in a saw and the blade amputated his left index finger.,0
"An employee passed out on the loading dock, requiring hospitalization.",1
"An employee was hooking a dead red fir log with an escaliner machine when the log went under the line, slipped, and struck the employee. The employee suffered a broken leg, as well as elbow and eye lacerations, requiring hospitalization.",1
"On August 29, 2018, an employee was operating a mechanical shear when the employee's right hand slipped under the guard and the blade amputated the index fingertip.",0
An employee was delivering cases of food product from his tractor trailer when he began feeling sick and having cramps. He was hospitalized with a kidney injury and heat exhaustion. The indoor temperature at the customer location was over 100 degrees with high humidity.,1
"A stand-up forklift struck a beam. Its operator struck his head and face on the inside of the forklift, then fell backwards off the forklift to the ground. He suffered head and face lacerations and was hospitalized.",1
"On August 29, 2018, an employee was exiting a locker room stall after changing out of her uniform. As she was exiting, she dropped her uniform. When attempting to pick it up, she tripped over it and fell to the ground, fracturing her left hip.",1
"An employee was struck by a forklift that crushed and fractured the employee's left foot, requiring hospitalization.",1
"An employee was installing new spoil boards on a router. The vacuum actuated, and the employee's finger was crushed between two boards. He suffered a partial finger amputation with no bone loss.",0
"An employee was using a load arm to transfer a test joint from a transfer line to storage when a bolt came loose on the load arm, causing the test joint to fall out of the load arm and onto the rollers and the table. The employee then fell backward to the ground and hit his head, losing consciousness.",1
"An employee was preparing to service a 69-kilovolt OCB switch. One leg of the switch did not disconnect when the air switch was opened. As the employee grounded the legs of the switch, an arc burned his hands and knocked him to the ground, breaking his ribs.",1
An employee was making an adjustment on a press machine when his right leg was caught in the machine and subsequently amputated below the knee.,1
An employee was changing a tire using a tire changer machine when he injured his lower back.,1
"An employee slipped while walking down an embankment and fell to the ground, suffering a ruptured patellar tendon.",1
"At about 2:30 p.m. on August 30, 2018, an employee was found in his car, having vomited due to heat stress. He was hospitalized.",1
"An employee was attempting to clear a jam from a crimping machine. When the employee removed the jammed material, the machine began to operate and amputated the employee's left thumb tip. The machine was not locked/tagged out at the time of the incident.",0
An employee fell down three stairs to the concrete floor. His left hand was fractured when he used it to brace for the fall.,1
"An employee bent over to sweep/collect debris. As the employee stood up, the employee's head contacted the straight edge of a steel coil and was lacerated, requiring hospitalization and stitches.",1
"An employee's right thumb contacted a concrete truck chute, resulting in a thumb tip amputation.",0
"An employee fell from a ladder while descending from the top of a boat, fracturing his pelvis.",1
"At about 4:00 p.m. on August 30, 2018, an employee was ridding a saddle mule when it spooked and ran up a hillside. He dismounted before being knocked off, landing on rocks and breaking two vertebrae in his lower back. He was hospitalized.",1
"An employee was leaving a straddle carrier cab when the door slammed on the employee's finger, resulting in an amputation of the tip of the finger.",0
"After checking the plumbing in a residential customer's attic, an employee pulled his truck into a local park to perform paperwork. A bystander found him slumped over the wheel. He was hospitalized for dehydration and pneumonia. Heat may have been a contributing factor.",1
"An employee was outside of his vehicle while it was being fueled when he stepped into a small hole and lost his footing, falling to the ground and fracturing his right hip. He was hospitalized.",1
"On August 30, 2018, an employee was carrying a concrete finishing machine when he tripped over a lip. The machine fell on his right hand and one of the blades caught his right ring finger, amputating it above the first joint.",1
An employee was attempting to adjust the band under a conveyor that moves the rollers when the band amputated his left thumb to the first knuckle.,0
"An employee was directing two forklifts in the installation of an 800-pound aluminum chain basket. The basket became unstable and fell, striking him in the face and knocking him to the ground. He suffered lacerations to the face and head and factures to the femur and contusions to the pelvic area.",1
"An employee was operating the casting machine. A malfunction allowed molten copper to be poured into water creating an explosion. The employee sustained burns to the face, neck, and shoulder and an eye injury.",1
An employee was shoveling dirt to backfill an electrical pole hole. The employee began showing signs of dehydration and was hospitalized.,1
"An employee was attempting to install a roller set onto a track system for a rolling-style door on a box railcar. The door was raised and was being supported by a forklift. A sledgehammer was used to hammer the roller set onto the track assembly. The impact of the sledge caused the roller set to slide off the fork, dropping the door 3-4 inches back to its original height. The employee's left index finger was pinched between the fork and a vertical door support pole. The finger was amputated.",0
An employee was cleaning the peanut butter pump and suffered amputation of three fingers on the left hand when the pump activated.,1
An employee was preparing for his delivery route and started not feeling well. He was hospitalized for possible heat exhaustion.,1
"An employee approached a hog that had gotten out of her pen. While defending its babies, the hog bit and knocked down the employee, who suffered face and arm lacerations, puncture wounds on the left arm, and a broken left arm.",1
"An employee was using a jointer on a piece of polymer wall paneling when it hung up. The employee lost his footing and the sawblade amputated about a 1/4"" of his right middle finger.",0
An employee was operating a mechanical power press. The employee's finger was pinched between the workpiece and the press's guard amputating the tip.,0
"An employee was investigating a gas leak at a jobsite when he became dizzy, tired, and had difficulty breathing. He was hospitalized for heat exhaustion.",1
An employee was using a nail gun to install a roofing system when a nail ricocheted and struck the employee's eye. The employee was hospitalized and had surgery.,1
"An employee was cleaning out a catch basin when he was struck in the face by a boom vacuum, breaking bones on the left side of his face.",1
An employee was loading rebars in a box-type trailer when one of the rebar hooks caught his finger. The tip of his middle finger was amputated.,0
"An employee was hand cranking a piece of non-powered equipment when the ply rolled backward causing the stripper roller assembly on the A-frame to flip backwards, amputating the employee's left middle fingertip.",0
An employee was holding a box of product when the bottom of the box gave out. Glass bottles fell to the ground and lacerated the employee' right hand. The employee was hospitalized and had surgery.,1
An employee's right middle finger was struck by a sledgehammer during precast concrete manufacturing. The fingertip was amputated.,0
"A technician was installing communication cables from a ladder. The ladder buckled and he fell about 15 feet, landing on a concrete floor. He suffered a skull fracture and was hospitalized for surgery.",1
"While unstrapping cargo straps on a flatbed, an employee lost his balance and fell to the ground. He suffered a broken ankle and was hospitalized.",1
"An employee was hit by a contractor's truck while crossing the street, breaking both of her legs.",1
"An employee was helping guide a pipe into place to connect to rig equipment. His left hand was caught between the pipe flange and the rig equipment's frame, and his ring finger was pinched. The tip was amputated. Personal protective equipment and impact gloves were being worn at the time of the incident.",1
"While standing on a mezzanine doing electrical work, an employee fell through a cover for the light panels to the floor below. The employee sustained a hip fracture.",1
"An employee's finger was caught between a pipe connection, resulting in a left fingertip amputation.",1
"An employee was holding onto a pressurized hot water hose when hot water splashed onto the employee causing burns to their arms, chest and leg.",1
"An employee was operating an order selector machine when it jumped the wire guide and hit a rack, fracturing the employee's right leg.",1
"An employee was repairing an underground drop at a customer's home when a copperhead snake bit his right middle finger, causing pain, swelling, and nausea.",1
"An employee was using a ladle to pour molten aluminum into a tilt when he started feeling ill and then vomited. He later experienced aching arms and hands, and was hospitalized for severe dehydration.",1
"An employee was standing on the second step of a stepladder painting a wall. As she went to step down, she missed the first step and fell to the floor, breaking her arm.",1
"An employee was assisting a customer with a car that was set on a jack when the car's tire fell onto his left hand, fracturing it.",1
"An employee stepped backward into a fueling pit on the ground that was about 2 to 3 feet deep, suffering a hematoma to his left leg just above his knee.",1
"An employee was mowing a lawn when the blade of a lawnmower contacted his hand, amputating his left middle finger.",0
"Between 6:00 and 7:00 p.m. on August 30, 2018, after returning home from a 10-hour shift, a burner operator began to feel ill. He was hospitalized for severe dehydration.",1
"An employee was grinding a casting using a 20-inch face-front grinding wheel when the employee's finger was pinched at the bottom of the wheel on the seal plate, resulting in an amputation.",0
"An employee was stepping down an extension ladder after installing a ceiling anchor for a section of duct when the ladder and employee fell. He suffered a broken right wrist, broken ribs, and a punctured lung.",1
"An employee was using a table saw to cut backsplashes to a shorter length. The saw lacerated three of his fingers, amputating the first joint of his left middle finger and the tips of his left index and ring fingers.",0
"An employee was delivering packages along his truck route when he became dehydrated due to the hot weather, requiring hospitalization.",1
"An employee became ill while shoving grain inside a kiln, requiring hospitalization for dehydration.",1
An employee tripped and fell while pulling a cart. The employee sustained a fractured hip.,1
"At 3:11 a.m. on August 31, 2018, while working in a manhole, an employee was overcome by an unknown air contaminant and lost consciousness. A second employee entered the manhole to rescue the first, but also lost consciousness. One of the employees was hospitalized.",1
"An employee was operating a boom lift in reverse when he hit a parked mobile crane. His left arm was pinched between the basket guardrail and the crane, fracturing it above the elbow.",1
"An employee used a forklift to pull a pallet from a stack. He got off the forklift and the boxes from the pallet fell on him, fracturing his ankle.",1
"On August 31, 2018, an employee was struck by a forklift's forks while walking across an aisle. The employee suffered a broken leg.",1
"At 4:00 p.m. on August 31, 2018, an employee was installing water lines in a trench when it collapsed, partially burying the employee. The employee suffered a broken pelvis, broken ribs, head trauma, and broken facial bones. Cave-in protection was not installed in the trench.",1
"An employee was helping a customer in the parking lot when a customer's car struck the employee. The employee was crushed between the car and the service center building, suffering a crushed abdomen and ruptured kidney. The employee was hospitalized.",1
"An employee fell to the floor while walking down stairs, suffering a broken left ankle.",1
"An employee dismounted his machine and was on the warehouse floor about to pull an order when the machine activated and struck him, pinning him to a wall. He fractured his pelvis and sacrum, requiring hospitalization.",1
"An employee was removing metal bars from the base of a hammer cage being held up by a crane when the cable holding up the hammer snapped. The hammer dropped and pinned the employee's left hand, which had to be amputated at the wrist.",1
"An employee was loading a forklift machine with steel walings (I-beam) when a waling fell off the forklift and caught his right hand, amputating his ring fingertip.",0
An employee was cutting a metal piece with a shear and suffered an amputation injury to the right thumb. The machine was not guarded at the time of the incident.,0
"An employee was lifting a basket of wood chips with a chain saw that had two choker chains attached when a link in one of the choker chains broke, hitting and fracturing the employee's right forearm.",1
"On August 31, 2018, at approximately 8:50 a.m., an employee was helping an associate cut limbs from a tree when he was struck by a pole saw, suffering an abdominal laceration.",1
"An employee was installing a garage door counterbalance. The spring action lifted the employee 6 to 8 feet into the air, causing fractures to the hip and shoulder. The employee was hospitalized.",1
An employee's right foot was run over by a forklift as the forklift operator was backing out of a freezer. The employee's right foot was crushed and the large toe had to be amputated.,1
"An employee was opening a double hung window. When he operated the sash release, the upper sash dropped and amputated his ring fingertip.",0
"An employee was about 25 feet up a tree, trying to cut off a large overhanging tree limb. The limb he had tied off to broke. He fell to the ground, landing flat on his stomach. He suffered collapsed lungs, fractured ribs, and an internally relocated stomach, requiring surgery.",1
"An employee was attempting to straighten a lumber board on a stacker when her left ring finger was caught and crushed between the end of the lumber and the unit lift mechanism, resulting in a fracture and lacerations.",1
"An employee was picking up a 56-pound casting piece out of an elevated tub that was full of casting pieces when another casting piece became dislodged and fell against the employee's left hand, causing a partial fifth fingertip amputation.",0
"An employee of AROCK Services, LLC, was overexposed to hydrogen sulfide gas while changing a valve on a pumper unit. The employee experienced nausea and inflammation of the throat, requiring hospitalization.",1
"An employee was installing shingles on an approximately 8-foot-high roof when the employee fell from the roof onto a concrete wall, suffering a lacerated lip and fractured jaw.",1
"An employee was under a parked vehicle performing repair work on brake lines when the vehicle rolled over his left arm and left side, momentarily pinning him between the vehicle tire and the ground. He suffered broken ribs as well as multiple cuts and contusions.",1
An employee was driving a truck when the fifth wheel came off and the truck turned over. The employee suffered brain bleeding.,1
"An employee was loading a railcar when he lost his grip on a ladder and fell to the ground. He suffered a fractured right wrist, a sprained left wrist, and chipped vertebrae.",1
"An employee was walking across the parking lot while escorting a patient to a work van when she lost her footing and fell to the ground, breaking her right arm and requiring hospitalization.",1
"An employee was testing the gun for a pressure washer when it shot high-pressure water into his hand. He suffered possible tendon damage, water under the skin of three fingers, and abrasions, requiring hospitalization.",1
"An employee was working in the field, installing and overseeing the installation of a midstream flexible piping system, when he started to feel weak. He was hospitalized due to heat stress and dehydration.",1
"On August 31, 2018, an employee was clearing debris from a small piece remover machine. The employee suffered a partial amputation to the left index finger, a full amputation to the left middle finger, and an injury to the left ring finger. The machine was guarded at the time of the incident.",0
"An employee was walking when she tripped and fell to the floor, fracturing her right wrist and elbow.",1
"An employee was taking inventory inside a truck when he fell out of the truck to the concrete floor, suffering a back injury and internal bleeding.",1
"An employee slipped on the iced floor in a cooler, falling to the floor. She suffered a broken left leg, requiring surgery.",1
"An employee was loading a metal locker onto a forklift when the locker door opened and slammed back, cutting his left ring fingertip and resulting in an amputation.",0
"An employee was on a 6-foot step ladder pulling a box out from under three other boxes on a shelf when she lost her balance and fell approximately 5 feet, hitting the shelves and floor. She was hospitalized with a head contusion, right hand laceration, right ankle sprain, and neck and back strain.",1
An employee was starting the company van to begin work when he felt chest pain. He was hospitalized for a possible lifting injury.,1
"An employee was installing an underground utility when the employee contacted an energized bus and was shocked, suffering electrical burns.",1
"An employee was opening cardboard dumpster when the dumpster gate struck his upper thigh, causing a contusion.",1
An employee tripped over a floor sweeper and sustained broken ribs.,1
"An employee was sorting hops when the employee's finger was caught in a chain and sprocket, resulting in the amputation of a finger. The chain and sprocket were unguarded at the time.",0
"An employee was attacked by a patient. He then fell and hit his head on the floor, suffering a subdural hematoma.",1
"At about 4:00 p.m. on September 2, 2018, an employee was parking a forklift when his left foot was caught between the forklift and a bollard. The foot was crushed; part of his big toe was medically amputated.",0
"An employee was walking when she slipped and fell to the ground, fracturing her left arm and injuring her head. She was hospitalized.",1
"An employee was using a hoist to change a cooling liquid bag filter on a machine when the strap broke, causing the filter's metal strainer to come down on the employee's left hand and amputate the left middle fingertip.",0
"At about 8:20 p.m. on September 2, 2018, an employee was trying to unjam a can necking machine. An aluminum part of a can flew out, striking the employee's left middle finger. The fingertip was amputated. The machine's guard was open at the time of the incident.",0
"An employee was pouring drain cleaner down a clogged pipe when it mixed with a different cleaner that had previously been poured down the drain. The two chemicals reacted and created fumes that the employee inhaled, suffering respiratory distress.",1
"An employee was retrieving water from a frac tank when he contacted a 25 kilovolt line with a pig pole and was electrically shocked. He sustained burns to his hands, feet, and abdomen, requiring hospitalization.",1
Two employees were lifting a box of freight into a trailer when the box fell and struck one of the employees. The employee was hospitalized for a sprain/strain to the shoulder and left hip and a head contusion.,1
"A rig hand was guiding pipe to a racking system on a rig floor to rack back the pipe. He slipped and fell on the rig floor. As he fell, the 90-foot drilling pipe was stabbed into the floor of the rig, pinching his finger against the floor. His finger was partially amputated.",1
"An employee slipped off a platform at a height of approximately 12 feet and fell to the ground below, suffering a broken hip.",1
"While entering a patient's room, an employee slipped on a wet floor mat and fell, striking their face on a bed rail and the back of their head on the floor.",1
"AN employee was carrying a roll of insulation tape when he slipped and fractured his left leg, requiring hospitalization.",1
"An employee was attempting to clean out excess dough from a pretzel folding machine when her hair became caught in a rotating shaft. As a result, she lost hair and a portion of her scalp, requiring hospitalization.",1
"An employee was changing a transmission on a loader/crane. While he was removing a bolt, the flywheel caught and amputated the tip of his left middle finger.",0
"An employee was walking by a room where a subcontractor had been working on a pipe and heard a hissing noise that made him think that gas was leaking. He evacuated the room and told the subcontract workers to leave when the gas ignited. The employee received burns to his hands, face, and shoulders.",1
"An employee was pinning the center section of a mast on a drilling rig when the pin was forced out of the pad eye connection and struck the employee on the right side of face, breaking bones.",1
"An employee was installing trusses when the truss he was tied to faulted and he fell 12 feet to the ground, suffering lacerations to the head and shoulder.",1
"An employee was moving a vibratory plate compactor from the bucket of a mini-excavator. The employee's right little finger was caught on the excavator's bucket hook. It was dislocated and severely lacerated, requiring surgery.",1
"An employee was striping lines in a soccer field.  He placed a metal stake in the ground, using string as chalk. The string did not reach as far as needed and when the employee tugged on the string, the stake came out of the ground like a slingshot, striking his left bicep. The stake traveled through his arm and punctured his lung.",1
"On September 4, 2018, at approximately 2:40 PM, an employee felt dizzy, passed out, hit his head, and suffered a head laceration. He was hospitalized for heat exhaustion.",1
An employee at a water line drilling site was struck by a hose when its fitting broke at the threads. The hose broke the employee's cheekbones.,1
An employee was scrubbing an aluminum panel while a coworker was pressure washing nearby when the water jet from the coworker's pressure washer lacerated the employee's finger. He was hospitalized and required stitches.,1
"An employee was using a tape measurer to measure the circumference of a steel tank that was sitting on rollers when slack in the tape measurer began to create a loop that was getting hung up. As the employee reached for the loop, he inadvertently activated the roller. His left pinky was then caught and smashed between the roller and the tank, resulting in a surgical amputation.",0
Two employees were working from an aerial lift to install insulation within the interior walls and roof of an aviation hangar. The lift operator drove it into an existing two-foot deep excavation causing the lift to tip over. Both employees fell out of the lift basket onto the concrete hangar floor. One employee was hospitalized for multiple leg fractures. Both employees were wearing a personal fall arrest system at the time of the incident.,1
"At about 3:40 a.m., on September 4, 2018, an employee was operating a stand-up forklift. The employee's left foot was caught between the forklift and a curb; she suffered a long bone fracture and was hospitalized.",1
"An employee was removing tubing and sucker rods from a well when a sucker rod broke and fell, striking the employee. The employee was hospitalized with a fractured left arm.",1
"An employee was cleaning and clearing regrind from the area around a large mechanical grinder. The grinder was powered down and locked out with the machine guarding and covering removed. The employee spun the shaft of the grinder by hand to check and see if the shaft/rotor was clear. This caused the shaft to rotate. He then tried to stop the shaft from spinning and his right hand contacted a blade attached to the shaft, causing multiple lacerations to his fingers.",1
"An employee in a slaughter plant tripped on a pallet and fell, breaking his right arm.",1
"The injured employee was walking from a staging area to a receiving bullpen while talking to a forklift operator who was at the dockside of a forklift aisle. A second forklift operator was traveling in the forklift aisle and struck the injured employee's left foot, breaking four toes and causing a large contusion. The employee was hospitalized.",1
"An employee was walking down a hallway that was just mopped when he slipped and fell. He attempted to break his fall with his right hand, splitting it on impact.",1
"An employee was cutting a 5-inch by 6-foot floor board using a table saw. The board jammed, and the employee's left hand was pulled into the saw. His left thumb and palm were severely cut. He was hospitalized, requiring surgery.",1
An employee was loading his car after finishing his work shift when he fell and broke his hip.,1
"Two employees were cleaning a car in a car lot. One of them was struck by a pallet carried by a forklift, suffering a broken arm, broken shoulder, broken ribs, and ruptured spleen. The employee was hospitalized.",1
"An employee was lubricating a shaft on a drum machine when the drum released onto the shaft, crushing and fracturing the employee's right index finger. The employee was hospitalized and had surgery.",1
"An employee was operating the tongs at a rig when the winch line broke and the equipment struck the employee's lower right leg, breaking the tibia. The employee was hospitalized.",1
An employee was pulling a plastic sheet from the plastic feeder part of a bottom crust freezer transport system. Her sleeve was caught and her right hand was pulled into the machine; she suffered broken bones in the wrist and lacerations to the hand.,1
"An employee was being trained by a second employee on how to cut a metal frame on a lathe. As they set the metal frame down on the lathe, the first employee's right thumb was caught and crushed between the frame and the lathe chuck.",1
"An employee was hitching a trailer onto his truck. His thumb was caught under the hitch, suffering a laceration.",1
An employee began experiencing cramps and trouble walking while surveying on a steep slope. The employee was hospitalized for dehydration and heat-related illness.,1
"An employee was walking down a stairway. He tripped on the last step and fell forward, striking his head on a wooden table. He was hospitalized for facial surgery.",1
"A temporary employee was pinning holes using a K-file tool. He placed the K-file in his mouth while checking something and swallowed the tool, requiring hospitalization.",1
"An employee was unwrapping a large coil around a conveyor belt. The coil bounced back, striking and breaking his left hand.",1
"An employee suffered from heat stress while torch-cutting a waste disposal container outside, requiring hospitalization.",1
"An employee was working on a dock, pulling product. A forklift in reverse struck him, smashing the top of his left foot.",1
"An employee was attempting to replace a pressure gauge on a hot gas ammonia line. As the employee loosened the gauge for removal, a quarter-inch pipe and valve broke, releasing ammonia vapor above the processing floor. The employee inhaled the ammonia vapors and required hospitalization.",1
An employee fell from the back of a truck while moving appliances.,1
"An employee was pulling back the rods of a boring machine when the rods became bound. Once they became loose, the bore rods flipped over and a bore head struck the employee's right leg, breaking bones.",1
"An employee was trying to change out a die on a cutoff press. The die crushed his hand, resulting in an amputation. The machine was not locked out or tagged out at the time of the incident.",1
"An employee was tightening a new battery on a truck when the truck slipped off its jack. The employee's left leg was caught on the truck's battery box, breaking the leg and causing a laceration.",1
"An employee was pulling a fan that was packaged in a cardboard box when the packaging ripped, causing the employee to lose her grip. She then fell to the ground and injured her hip.",1
"A security officer was assaulted by an individual he was attempting to restrain in the emergency department. He twisted his right ankle and fell to the ground, requiring hospitalization.",1
An employee began to experience cramping after completing a shift as a pusher side doorman.  The employee was hospitalized to treat heat exhaustion.,1
An employee was attempting to remove a jammed pallet from a conveyor. The employee's left glove was caught by a moving mechanical part and pulled into an ingoing nip point created by a chain and another mechanical part. The ring finger was amputated below the first joint.,1
"While holding a grout hose, an employee suffered chemical burns from grout runoff. The employee was hospitalized.",1
An employee was in a walk-in cooler carrying a box of tomatoes when she tripped over a box on the floor and fractured her right ankle.,1
"An employee was using pipe wrenches to disassemble a 16-gun assembly. After pulling a wire line out of the hole, the employee lost consciousness due to heat stress.",1
"An employee lost consciousness while standing on the second step of a front end loader, 3 feet off the ground. The employee fell, suffering a kidney laceration, a facial fracture, and several fractured ribs. The employee was wearing a hard hat.",1
"On September 5, 2018, an employee was operating a machine to form a part when his right index finger was pinched between a quick clamp and the part, resulting in a fingertip amputation.",0
"An employee was walking in the company driveway during a 15-minute break when the employee's left foot rolled and the employee fell to the ground, suffering a broken hip. The employee was hospitalized.",1
"An employee was using a meat saw to cut down a bone. The saw cut his left middle finger, partially amputating the tip.",0
An employee was burned in an explosion that happened while a vacuum trailer was being power-washed.,1
"An employee was descending a customer's steps when the bottom step broke, kicking up and hitting her; the employee fell and suffered three broken ribs and a partially collapsed lung.",1
"An employee was overseeing as a wire was being run through a machine when the wire became jammed. As he tried to help unjam it, the wire caught his left hand and amputated his upper left thumb.",1
"Am employee was using a grinding wheel to repair a mini-excavator when the grinding wheel became caught, kicked back, and struck his thigh, lacerating it in two places.",1
"An employee was operating an automated linear saw and trying to reposition a board that was being fed into the saw when her finger became caught between the board and the guard of the machine, resulting in the amputation of her left index fingertip.",0
"An employee lost the keys to her postal vehicle while delivering mail. She sat in the vehicle and called for assistance. When the assistance arrived, she was found unresponsive in the vehicle due to dehydration.",1
"An employee was changing the water filter on an extruder. The lid, which was hanging from a hook, came loose and fell onto his hand. His right middle finger was amputated.",0
"Before 6:00 p.m. on September 5, 2018, an employee tripped/slipped and fell on a dryer while carrying a chainsaw. The chainsaw cut the employee's lower left leg above the kneecap, causing a deep laceration.",1
"An employee was climbing up a 6-foot ladder to install a carbonated beverage line above a restaurant ceiling. The ladder shifted and he fell to the floor, breaking his right leg just above the knee.",1
"While cleaning up a work area and shutting down the job for the day, an employee suffered shortness of breath, possibly heat-related.",1
"An employee was on a stand-up forklift, putting trash in a compactor. As he was discarding some netting it snagged the operator control, causing the forklift to move forward. His foot was caught between the forklift and the compactor, resulting in a fracture to the left foot.",1
"An employee was walking through a hydraulic door when he slipped and his pinky finger was caught between the closing door and the door frame, resulting in a pinky amputation.",0
"An employee suffered dermatitis on the upper right thigh while working with 1,6-hexanediol diacrylate.",1
An employee was entering the cab of his truck after fueling when he fell and hit his head on the tractor step or door well.  He was hospitalized for bleeding on the brain and required sutures.,1
An employee was using an embossing machine when it activated and contacted her right middle finger. The fingertip was amputated. The machine was guarded at the time of the incident.,0
"A temporary employee was removing a window from a building during demolition activities when the window broke and lacerated the employee's left wrist, severing a vein. The employee was hospitalized and had surgery.",1
"An employee was removing a guard and frame from a machine during maintenance work when the guard dropped onto his left middle finger, resulting in a fingertip amputation.",0
"An employee was installing a water pipe when he became overheated and later experienced leg cramps, requiring hospitalization for dehydration.",1
"An employee tripped while walking and broke her kneecap on the floor, requiring hospitalization.",1
"An employee was changing a belt on a machine when the belt lacerated the employee's right hand, causing tendon damage that required surgery. The machine was not locked out at the time of the incident.",1
"An employee was walking into her office when she tripped on a torn section of carpet and fell, suffering a sprain/dislocation to her left shoulder. She was hospitalized.",1
"An employee was opening the rear doors on a semi trailer. A 227-pound skid of freight fell out of the trailer, striking the employee in the back of the head and neck.",1
"On 09/05/2018, at 10 a.m., an employee was putting together crates when a piece of thin metal fell or came in contact with his left arm, lacerating it.",1
"An employee was changing a roll of film on a bagging machine when the employee's left hand was caught between the machine's belt and guard, resulting in a partial amputation to the left index finger and a laceration to the left middle finger.",0
An employee was attaching a bar to a cart when the employee tripped over the bar and broke a leg.,1
"An employee was offloading grain from a rail car to a truck. While crossing over a conveyor belt, the employee tripped and fell into the conveyor and was caught in the tube. He suffered ""road rash""-type burns to his back, ribs, and arms and was hospitalized for burn treatment.",1
"An employee was moving a lift into another room and had closed the room door when a sheet metal damper installed in the wall above the door fell from the ceiling and hit the employee's back, fracturing the C5 vertebra and compressing other vertebrae.",1
"At 10:30 a.m. on September 5, 2018, an employee unlocked a shipping container that was mounted on a train, then lost his balance and reached out to grab the container. It shifted, and his right hand was caught between two containers. Three of his fingertips were crushed/amputated.",1
"On 9/5/2018, an employee was walking to move a customer's vehicle to the installation area when another employee backed a vehicle up and struck the injured employee. He fell and hit his head, suffering a subdural hematoma that required hospitalization.",1
"An employee was setting up equipment at an electrical substation when the employee became ill and passed out due to heat exposure, requiring hospitalization.",1
"An employee was walking when her foot became caught on the floor. She then lurched forward and fell, fracturing her right elbow and left knee.",1
"An employee was moving products from one pallet to another when the employee's shoe lace was caught on the corner of a pallet, causing the employee to trip and fall to the floor. The employee fractured the right femur.",1
"An employee fell and broke his leg. He was hospitalized, requiring surgery.",1
An employee's left index finger was caught in a pipe crimp cutter as he used it to cut a piece of tape. The employee's left index fingertip was amputated.,0
An employee suffered a left palm laceration and broken fifth metacarpal while removing the retaining ring from a remote anti-armor munition (RAAM) mine.,1
"An employee was climbing an extension ladder when the employee fell from the ladder to the ground, suffering a shattered heel and other injuries. The employee was hospitalized.",1
"An employee was checking torque on automobiles when she fell off a work platform. She fell about 18 inches, breaking her left leg and left elbow. She was hospitalized, possibly needing surgery.",1
"An employee was threading paper through a roller. As he tried to remove a piece of paper, the roll caught his hand and pulled it into the machine. His right ring finger was amputated.",0
"An employee was driving a clamp lift truck and following another clamp lift to the dock. The lifts were travelling in reverse so the employees had a clear view to the front. The front lift stopped suddenly, and the employee's lift ran into the clamp on the front lift. The employee was struck by the clamp, lacerating his leg from the ankle to above the knee.",1
"An employee was on an 8-foot ladder, taking apart a light fixture in a ceiling grid. A live wire shocked him and he fell to the floor. He suffered burns and lacerations to his left hand.",1
"After cleaning a conveyor belt, an employee noticed something in the belt and was attempting to pull it out when her hand was caught in the sprocket. The skin was removed from the top of her hand. The belt was re-energized at the time of the incident.",1
"An employee became weak while delivering mail due to dehydration, requiring hospitalization.",1
"While walking at a work site, an employee fell and broke her hip.",1
"An employee was operating a concrete mixer when the employee's hand entered the running mixer and contacted the blade, breaking the hand. The employee was hospitalized.",1
An employee was cutting wood when a miter saw amputated the tips of his left index and second fingers.,0
"An employee was working from a 12-foot ladder, pulling parts off a shelf. Two boxes were stuck together; when they gave way, the employee lost his balance and fell to the ground. He suffered contusions to his head, left elbow and left shoulder.",1
"An employee was using a table saw and a push jig to cut a wooden piece when the piece came out of the push jig. As he reached to remove the piece, two of his fingers contacted the blade and were cut. The saw was unguarded at the time.",1
A temporary employee was using a shovel to finish the edges of a clay tennis court. The employee became ill due to heat stress and was hospitalized.,1
An employee was behind a forklift when the forklift reversed and ran over his foot.,1
"An employee was using an air compressor to add air to the compressor on a bus when the bus rolled, pinning him between it and a work truck.",1
"An employee was leaving a yard truck when the door slammed on his foot, breaking it in two places.",1
A robber shot a retail sales employee in the left side of the abdomen. The employee was hospitalized.,1
"An employee missed a step while descending a mobile A-frame ladder and fell to the ground, fracturing a wrist.",1
A temporary employee was operating a forklift. The employee's hand was caught and crushed between the lift and an I-beam. The employee was hospitalized for surgery.,1
"An employee was holding several of an oil drilling rig's electrical cables while the rig was being transferred from one well to another. The cables were damaged, and the employee was shocked.",1
"At 9:00 a.m., an employee began a shift loading crates full of cans into pressure cookers. At about 11:30, he began to feel cramping. By the end of his shift, at about 6:30, his cramping had worsened. He was hospitalized for heat exhaustion.",1
"An employee was cleaning a rotating mold using a pole with a brush attached to the end. The brush got caught on the mold, and the employee was pulled over a barrier wall and slammed to the ground. The employee suffered a lacerated liver and a cracked sternum.",1
"An employee was hit by a tree limb, suffering a partially collapsed lung that required hospitalization.",1
"A tow tractor struck an employee, pinning her against another tow tractor. She suffered an injury to her lower left leg and was hospitalized.",1
"On September 6, 2018, an employee was drying the conveyor belt from the underside of a machine when his hand made contact with the machine's roller and was pulled into the conveyor, breaking his arm. He was hospitalized and had surgery.",1
"A temporary employee was on an elevator under a high-speed sheeter, helping clear a jam between two belts. The elevator activated, pinning the employee between itself and the machine walking platform. The employee suffered a partial collapsed lung and an abrasion injury.",1
"An employee doing maintenance on a roof fell 7 feet, suffering internal injuries.",1
"An employee was installing bolts to hold the metal parts of a framework when a metal part slipped and trapped his right pinky fingertip, resulting in a fingertip amputation.",0
An employee's left middle finger was caught and crushed between the press leg and a metal ring on a tire.,1
"An employee was on a 12-foot ladder changing a light fixture. He lost his balance and fell to the tile floor, suffering a head laceration and fractures to his right elbow, his left wrist, three ribs, an eye socket, and his skull. He was hospitalized.",1
"An employee was using a push mower to mow a sloped portion of grass when he slipped and his left foot slid under the mower. The rotating plastic blades then lacerated his foot, and he was hospitalized.",1
"As a banded load of concrete forms was lowered onto a flatbed trailer using a forklift, it crushed a trailer truck operator's finger. The tip was amputated.",0
"An employer was caught in a conveyor, suffering an amputation 4 inches below his right elbow. The conveyor was guarded with a gate at the time of the incident.",1
"An employee was struck by a load of shoring equipment being moved by an excavator when the boom swung, breaking an ankle and heel. The employee was hospitalized.",1
"An employee was removing a keeper pin with another employee when the keeper pin released more easily than expected and the pin removal tool slipped into the opening of the frame.  The employee's fingertip was caught between the head of the pin removal tool and the turn table, amputating a portion of the fingernail.",0
An employee was standing in a breezeway near a roll-off paint booth taking photos of sub-assemblies when a forklift struck the right side of his body. He suffered a lacerated kidney and contusions.,1
"An employee was cranking down the landing gear of his trailer. The gear handle struck him in the face, breaking a bone on the right side.",1
"An employee was welding when his shirt sleeve contacted a hot weld and ignited. He suffered a second degree burn to his forearm, requiring hospitalization.",1
"An employee was supervising mechanics who were attempting to replace a gauge roller’s drive motor. The mechanics had begun to lift the replacement drive motor and frame assembly with a motorized material handling device when the motor and frame assembly began to move off of the forks and tipped over, making contact with the injured employee's right foot. He then fell and his leg impacted the floor, fracturing his right ankle and tibia. He was hospitalized.",1
An employee's left arm was caught between the roller and belt in a cotton gin conveyor system. The arm was broken; the employee was hospitalized for surgery. The system was not guarded at the time of the incident.,1
An employee was working on a utility line when an electrical flash occurred. The employee suffered second degree burns to the face and neck.,1
An employee of Liberty Technology was setting a pattern on a trolley using a hoist. His fingertip was caught between the form and the carriage and amputated. He was hospitalized.,1
"An employee was loading a carrier when the employee tripped and fell on the aircraft door. The employee's right middle finger was then caught in the carrier handle, breaking and lacerating it.",1
"An employee was operating a powered lift. The employee raised the control arm upright and the emergency brake engaged. The employee lost balance and extended the left leg, which was caught between the back of the vehicle and a barrier. The employee sustained a left lower leg laceration and fracture.",1
"A file cabinet toppled under the weight of wet sheets of paper that had been placed on it to dry, breaking an employee's right femur.",1
"An employee was driving a buggy down a hill when he hit a curve and fell off the buggy onto a concrete sidewalk, hitting his head and suffering a concussion.",1
"An employee was putting his pallet jack into a trailer when the jockey began pulling the trailer, causing the employee to fall from the dock and strike the dock plate before landing on the ground and fracturing three ribs.",0
"A forklift operator had walked away from a forklift when an employee noticed the forks were covered with gravel. The employee was removing the gravel by hand when the forklift operator returned and began operating the forklift, unaware that the employee was below.  The forks then crushed the employee's right index finger, resulting in a medical amputation of the fingertip.",0
"An employee was attempting to separate product as it was exiting a wrapping machine when her left hand was caught in the machine, crushing and fracturing her middle finger. She was hospitalized for surgery.",1
"An employee slipped on wet asphalt and fell, landing on and breaking her left knee. She was hospitalized.",1
"An employee tripped on a small cardboard box in the aisle next to her work table. She fell to the floor, landing on and breaking her left hip.",1
An employee operating a stock picker backed up and was struck by material requiring stitches and hospitalization.,1
"An employee was cleaning the floor and moving a mobile cart when the cart rolled into a drain in the floor and rolled over, falling on and fracturing the employee's lower leg.",1
"A patient closed a door on an employee's hand, causing amputations to her left ring and little fingers.",0
An employee was servicing a soft roll packaging machine when the machine started. His left index fingertip was then caught and amputated in the machine's chain.,0
"On September 7, 2018, at about 6:15 a.m., an employee was using a forklift to empty a trash hopper when the hopper shifted. The employee's middle finger was then caught between the hopper and the forks of the forklift, resulting in a medical amputation of the fingertip.",0
"An employee slipped and fell to the floor of a facility, requiring hospitalization and surgery.",1
"An employee had set down an electrical breaker box inside a motor control center he was preparing to replace the breaker in. He turned to walk away and an electrical arc flashed out of the open door of the cabinet, burning his palms and wrist and causing a slight burn to his right cheek.",1
"An employee was pulling a piece of drill stem when the drill stem dropped. The employee's finger was caught between the drill stem and a metal grate, resulting in an amputation of the distal left ring finger.",0
"An employee was installing an anchor on a roof when the employee slipped and fell off the roof and onto the ground below, breaking a shoulder and hip.",1
"An employee's finger was caught in a conveyor's belt and pulley, and the tip was amputated. The guard was not in place at the time of the incident.",0
"The top of an employee's gang box fell on his finger, resulting in an amputation.",0
"An employee was installing a transformer when an arc flash occurred, causing second degree electrical burns to the employee's right arm. The employee was hospitalized.",1
An employee was manually moving a belt on an HVAC unit when three of the employee's fingers were pinched and amputated between the belt and pulley.,0
"An employee was delivering sodium hypochlorite (bleach) to a customer by tanker truck. The customer directed the employee to the incorrect unloading station, and the sodium hypochlorite was unloaded into a hydrofluorosilicic acid tank. The chemicals were incompatible and produced chlorine gas, which the employee inhaled.",1
An employee was driving a 4x4 all-terrain vehicle when it hit a tree stump and rolled down a steep hill. The employee suffered a neck injury and an abrasion to the left shin and was hospitalized.,1
"On September 7, 2018, an employee fell from a 6-foot step ladder while cutting wiring in a test unit, suffering a fractured skull, broken ribs, and a back injury that required hospitalization.",1
Two employees were transferring a patient from a bed into a chair when one suffered a back and shoulder injury.,1
"An employee was using a ratchet puller to remove a clutch plate off a press while standing on a 10-foot portable ladder when he fell to the ground below, fracturing his left heel and right ankle.",1
The injured employee intervened in an argument between a coworker and a former employee. The former employee stabbed the injured employee three times with a knife.,1
"An employee's feet became entangled in loose metal banding and she fell to the floor, suffering a right arm fracture that required surgery.",1
"An employee was offloading bags from an aircraft when a bag became lodged at the top of the belt loader. The employee stood on a step and tried to dislodge the bag with one hand while holding a rail with the other hand. As the bag became dislodged, there was some spring action that caused the employee to lose footing and fall from the step to the concrete below. The employee fractured the left elbow.",1
"The injured employee was helping a welder while a nearby trackhoe operator had a 4' pipe joint hooked up to the trackhoe with a strap. The operator leaned forward to adjust his side mirror and as he sat back down, his shirt was caught on the joystick, which caused the machine to move the 4' pipe forward. It struck the 6' main line pipe, which in turn fell off the cones and landed on the injured employee's legs. Both legs were broken and she was hospitalized.",1
"An employee was installing a walkway when a motorized wheelbarrow struck his foot, resulting in a cracked ankle and puncture wound that required hospitalization.",1
"An employee was changing a conveyor chain inside a robot cell. He pushed the transmission case forward to take the chain off the sprocket. The transmission case activated a photo sensor, which pushed the next case up the line. The employee's right index finger was then pinched in the chain, resulting in a finger amputation. The conveyor was not locked out at the time of the incident.",0
"An employee was leaving the sleep berth of a truck when she fell, breaking her left knee.",1
"An employee was walking through a dish area when he slipped and fell to the floor, breaking his hip.",1
An employee fell from an order picker in the warehouse and suffered head trauma.,1
"Two employees were taking meat and placing it in yellow trays at the tail end of a production line. The two employees began to disagree about the pace, and one employee punched the injured employee in the face. The injured employee suffered a broken mandible.",1
An employee was assaulted leaving the store after his shift. He was hospitalized with multiple lacerations and a possible concussion.,1
"An employee had been filling steel kegs and moving the kegs using material handling equipment when the employee began to feel unwell, requiring hospitalization for heat exhaustion.",1
"An employee was servicing a paper machine when he attempted to align a pin and contacted a limit switch, causing the machine to cycle and crush his hand.",1
"An employee was rolling a steel beam with an overhead crane and a plate clamp. The clamp slipped and the beam fell, crushing the employee's left middle fingertip. The tip was surgically removed at the first knuckle.",0
"An employee slipped and fell down a flight of stairs that were wet with water, suffering a broken left ankle and fractured kneecap.",1
"An employee was using a chop saw when a piece of wood fell to the floor. As the employee was picking it up, the saw activated, amputating the employee's right middle finger and ring fingertip.",0
"An employee was operating a shear machine when his left middle finger made contact with the hold-down, resulting in an amputation to the first knuckle. The machine was guarded at the time of the incident.",0
"During the breaking of a connection, an employee was holding a ""mud bucket"" against a pipe to minimize the splashing of mud on an oil rig floor. As the two pieces of pipe were moved apart, a spray of mud caused the employee to fall and hit his head on a piece of equipment behind him. He suffered a scalp laceration and a skull fracture.",1
"An employee was removing a part from an assembly press when the press cycled and crushed her right arm, breaking bones and causing lacerations.",1
"An employee was standing near a bundle that a forklift operator was unloading when the bundle's wood bracing hit the dock plate. The wood bracing then broke and struck the employee, causing a deep head laceration.",1
"An employee was leaving the server aisle when her apron became caught on a trash door. Her hip caught the door and she fell, fracturing her hip.",1
"An employee was using a forklift to move a pallet of coffee when the employee dismounted the forklift to retrieve an item that fell. The pallet of coffee then struck the employee, who suffered a broken hip.",1
Two employees were involved in horseplay when one employee tripped the other employee who fell to the floor breaking a knee cap.,1
"An employee was vacuuming fly ash on the top section of a boiler when he stepped into an unusually deep section of fly ash, sinking into it up to his knees. The fly ash, which was still hot, went under his pants and into his shoes, causing second degree burns to both legs from the knees down.",1
"An employee was cleaning up waste plastic under a manufacturing line. A sprocket pinch point caught the employee's left ring finger, causing an amputation of the fingertip. The machine was guarded at the time of the incident.",0
An employee was cleaning inside a tank with a pressure washer. The stream from the washer cut through the employee's right boot and into the employee's foot.,1
"An employee was exposed to mold and moisture while working and began to experience coughing and tightness in the chest, requiring hospitalization for pneumonia and exacerbation of asthma.",1
"An employee was attempting to straighten out the material on a stamping press when a sensor was tripped, causing the automatic clamping/straightening action of the press to activate. The movement caused an amputation of a finger on the employee's left hand.",0
"An employee was cleaning a machine's overhead transfer belt when her hand was pulled between the rollers, breaking her right arm.",1
"At about 12:10 a.m. on September 10, 2018, an employee was walking toward a vehicle when she tripped over the base of a temporary fence set up around a medical services tent. She fell to the pavement, breaking her left arm and shoulder.",1
"An employee slipped and fell on a wet floor while walking through a turnstile door, hitting and injuring his head.",1
"An employee was training a new employee on a belt sander when the actuator was engaged, which caused the machine to move. The employee's finger was then caught between the sander's holder and fixture, resulting in a fingertip amputation.",0
"An employee was cutting wood with a chop saw. The saw caught the employee's left index finger, amputating the tip.",0
"An employee was using a high-pressure hose to find an underground utility line. The wand fell on his left foot, cutting it with water pressure.",1
"While searching for a lost hiker, an employee was bitten by a copperhead snake. The employee was hospitalized to receive antivenom.",1
An employee was walking in a log yard when a loader drove near him and struck his foot with the left front tire. He suffered a left foot laceration.,1
"On September 10, 2018, a tree trimmer was removing a limb from a utility line after a storm. When the tension was released, the limb hit the employee in the face, breaking the skull near the eye socket.",1
"An employee was on a hydraulic tank attached to the back of a truck. He slipped on hydraulic residue and fell from the tank, suffering a punctured spleen, bruised rib, and collapsed lung.",1
"An employee was running a concrete pump truck when the boom struck either the employee or handrail, causing the employee and handrail to fall 29 feet. The employee was hospitalized with a head laceration, five broken ribs, a broken ankle, and a fractured fibula.",1
"While an employee was using a manual post driver, his left middle finger was trapped between the driver and a post. The fingertip was crushed; he was hospitalized, and the tip was medically amputated.",0
An employee was removing a hose from a mud pump with a crescent wrench when the wrench slipped off the nut and his hands were mashed between the wrench and pump.,1
"An employee was cashing out a customer when she stepped back and tripped on a floor mat, falling to the floor and fracturing her right hip. She was hospitalized.",1
"An employee was using a tool to check the correct diameter of sheet metal in a roller machine when his gloved right hand was caught by the roller and pulled into the machine, crushing four fingers. As a result, the four fingers were amputated.",0
"An employee was welding laps on a commercial roof. The employee slipped and fell about 13 feet, suffering a broken humerus, broken rib, broken spinal wing, and pelvic fractures.",1
"An employee was stepping out of his mail delivery truck when he was struck by a moving vehicle, fracturing his left ribs and left arm.",1
"An employee had disconnected a transfer hose from a splitter line and was turning to connect the hose to a tote. Her foot was hooked by a second hose, still connected to the splitter line, and she suffered a broken femur.",1
"An employee was standing on a lift gate and engaged the gate's controls. As the lift approached the bed of a box truck, the employee's right wrist was caught between the control box and the lift. The employee was hospitalized with a fractured right wrist and had surgery.",1
"An employee was operating a shaper machine when his finger came in contact with the 1/4"" round over bit, resulting in a left index finger amputation.",0
"An employee was ripping lumber using a circular saw. The saw kicked back, striking the employee's left thumb and cutting off the tip just below the nail.",1
"A temporary employee was lifting a door forming tool when the 150-pound tool dropped on his right index fingertip, resulting in a fingertip amputation.",1
"An employee was troubleshooting an HVAC system that was making a squeaking noise at the belt. The employee applied pressure to the belt, which then made contact with the pulley system and pulled the employee's left hand into the system. As a result, the employee suffered a partial amputation of the left index finger.",0
An employee was hospitalized for a broken arm.,1
"An employee was checking for a bad bearing on a press when the employee's right middle finger went into the rollers, resulting in an amputation. The roller was unguarded at the time of the incident.",0
"An employee was standing on a two-step stepladder pulling on a tire during a front end alignment. The ladder moved out from under him and he fell to the floor, fracturing his hip and wrist.",1
"An employee was using a circular hand saw to trim the edge of a pallet when the saw jumped back and cut the employee across the left hand, amputating three of his fingers.",1
"An employee was cutting 4-inch shelving. While he was retrieving a piece of wood, the spinning blade amputated his left thumb to the first knuckle.",1
"On September 10, 2018, a truck driver was helping unload steel rolls from a flatbed truck. When the chain supporting the rolls was removed, a roll came loose from the stack and fell onto the employee's leg. The employee suffered a fractured wrist and an above-knee amputation of the left leg.",0
An employee was underneath a tractor supported by two jacks to repair a flat tire when the tractor slid off one of the jacks. The tractor frame struck and cracked the employee's pelvis.,1
"An employee was removing tie straps from freight in a trailer when he turned around and a securement stand slipped off the trailer, striking and fracturing two discs in his back.",1
"An employee was lifting a panel of fencing when it slipped and the employee's ring finger landed between the fence panel and the truck bed, resulting in a partial amputation.",0
An employee was dumping a hopper when the hopper slid and amputated one of his fingertips.,0
"An employee was securing the air seal on a motor mount when another employee, who was attempting to lower a fan assembly, loosened the come-along on the load and the fan assembly shifted, pinning the injured employee into the motor mount. The employee's head was crushed, breaking several bones in his face.",1
"An employee was carrying a car bumper down an enclosed stairway. As he approached the floor level, he missed a step and fell to the floor, breaking his right ankle and requiring hospitalization and surgery.",1
An employee was changing out a work roll in a tilt plant at a finish mill. His left foot was caught and broken in a pinch point.,1
"An employee was walking across the street when he was struck by a pedestrian driving a vehicle, injuring his hip.",1
"An employee was on top of a baker style scaffold that was approximately 5 to 6 feet high attempting to move it when the employee became unstable and fell to the concrete ground below, suffering neck fractures.",1
"On September 11, 2018, an employee was attempting to clear a jam from the rollers of a long coiler machine when the employee's finger was caught in the roller, resulting in an amputation of the right index finger area.",0
An employee twisted a knee while walking. The employee was hospitalized and required surgery for a possible torn ACL/MCL.,1
"An employee was descending from a steel column when he became stuck on a protruding steel plate, suffering a laceration.",1
"An employee fell from a third floor while conducting roofing work, fracturing a leg.",1
An employee was carrying hot tar for a roofing installation when the tar burned him.,1
"An employee was crossing the street while a crew was paving a section of road.  He was within the work zone when he was struck by another passing car that was in the wrong temporary lane of traffic. He flew over the car and landed on the ground behind it. He was hospitalized with a broken ankle, two fractured/chipped vertebrae, minor cuts to his head, loss of skin from the back of one hand, and a small brain bleed.",1
"An employee tripped on a mat and fell to the floor, suffering fractures in the left pelvis area and the left arm. The employee was hospitalized.",1
"An employee was changing out an air bag on a trailer when the bag came free and pinched the employee's left index finger between the bag and a bracket on the trailer, resulting in a fingertip amputation to approximately the base of the nailbed.",0
"A FedEx employee backed a delivery truck into a driveway. Upon exiting the vehicle, she walked to the rear doors to retrieve a package. As she turned to walk around a car that was behind her, the car proceeded to unexpectedly back up, striking the truck first, then pinching and crushing her legs between the bumpers of the truck and car. She suffered multiple fractures to her right leg below the knee.",1
"An employee was operating a stand-up forklift truck when he struck a guardrail, lacerating his right leg and requiring hospitalization.",1
"An employee was walking across a production floor when she tripped and fell to the floor, suffering a dislocated shoulder, a knee injury, and a laceration to the face.",1
"An employee was raking leaves in the front yard of a building when a rattlesnake bit his lower left leg above his work boot, causing nerve injuries.",1
"An employee was climbing a ladder when he fell, suffering a broken wrist and a cut on the forehead.",1
An employee was stepping out of her mail truck in a parking lot. She slipped in a water puddle and broke her right ankle.,1
"An employee was placing a steel plate onto the back of a flatbed truck when the employee slipped off the bed of the truck and fell approximately 5 feet to the ground, fracturing the left femur.",1
An employee was operating a boom in a bucket truck. One outrigger of the truck was placed on the pavement and the other outrigger of the truck was on soft ground. The outrigger that was on soft ground sunk into the ground and caused the truck to roll and the weight to shift on the truck. The employee and bucket then fell to the ground. The employee suffered L1 and L2 vertebrae fractures and a right cheek laceration. Fall protection was worn at the time of the incident.,1
"An employee was pushing an air conditioner on an assembly line when he bumped a valve with his right shoulder. The valve then opened and sprayed refrigerant onto his right back area, causing chemical burns.",1
"On September 11, 2018, while caring for a patient, an employee suffered a strain/sprain to the back.",1
An employee was clearing debris from a shear area when the shear was activated via the foot pedal. The shear then caused an amputation to the employee's left middle finger.,0
An employee was pushing a camera cart when his right little finger was caught between the cart and the wall. The finger was partially amputated.,0
An employee slipped and fell while walking down a wet sidewalk in a parking lot. The employee broke both bones of the left arm below the elbow.,1
"An employee was on a ladder performing work when the ladder collapsed. The employee fell approximately 8 feet, landing on his right foot and fracturing his right ankle.",1
An employee was stripping epoxy spray finish from tile floors when he experienced difficulty breathing and vomited. He was hospitalized for chemical exposure. PPE was not worn at the time of the incident.,1
"An employee placed a ladder against a telephone pole, climbed up, and tied off to the pole with a climbing belt/rig when the pole broke at ground level and fell, pulling the employee down with it. The employee suffered a broken nose.",1
"An employee was walking when she lost her balance and fell, fracturing her kneecap and requiring hospitalization.",1
"An employee was exercising a horse when it was startled and threw her off. Her head struck the ground; she was knocked unconscious, suffering a concussion and minor internal head trauma and bleeding. She was wearing a protective helmet and safety vest at the time of the incident.",1
An employee had thrown a ratchet strap into a truck when the strap bounced back and struck him. He was hospitalized.,1
An employee fell off a stool.,1
"An employee was conducting a maintenance repair on a rotor shaft when the chain grabbed his gloves, pulling his fingers between the chain and sprocket and fracturing them.",1
"An employee was using a band saw to cut pork chops when the saw blade cut the employee's left thumb, resulting in an amputation.",0
"An employee was attempting to adjust stacked carriers that had been bumped by a forklift when his left middle finger was pinched between two carriers, resulting in a fingertip amputation at the first knuckle.",0
"An employee was standing on top of a molding platform and reaching for a guard arm when the employee fell 7' 8"" from the platform to the floor, suffering a fractured hip.",1
An employee's leg was pinned between a stanchion and a forklift jack.,1
"Two employees were untangling lines along a furnace line when one of them, suffering from heat dehydration, became dazed and fell. The employee head struck the concrete floor, causing a head wound.",1
"An employee was riding in the back of a company work truck when a pipe roller made contact with his hand, causing multiple fractures.",1
"An employee was changing a die on a press. He had removed the bottom half of the die and loosened the clamp on the top die, and was sliding the top half of the die to the right of the press when the top half fell about 6 inches onto his right hand. His middle and ring fingers were broken.",1
"An employee was installing an aluminum soffit from an aluminum ladder when he made contact with an electrical line, causing him to fall from the ladder and receive electrical skin burns.",1
"An employee opened the front door to a commercial dryer to add some garments. The dryer did not turn off when the door was opened. Garments in the dryer caught her arm, twisting it and tearing tendons in her hand.",1
"An employee picked up a portable bandsaw. It activated and its blade touched his right hand, amputating the little finger up to the first knuckle.",0
A maintenance employee was aligning a belling head when the machine amputated the tip of his index finger.,0
"An employee was found laying on the ground unresponsive after shearing bushes, requiring hospitalization.",1
"An employee was servicing an oil well. The employee's left hand was caught between a rod rotator and a bridle, and the little finger was amputated.",0
"While in training, an employee lost control of her powered industrial vehicle. As she was attempting to gain control of the vehicle, her left arm went outside the vehicle's cab and became pinned between the vehicle and inventory racking. Her left arm broke.",1
"An employee was moving steel with an overhead crane when the crane hook slipped off the chain and the steel fell on the employee, cracking the employee's right femur.",1
"An employee was crossing a car wash conveyor when the rollers (which pushed the cars) caught her left foot. She suffered lacerations and broken bones, and was hospitalized.",1
An employee was using a screwdriver when it slipped from the employee's hand and struck the employee's left eye. Safety glasses were not worn at the time of the incident.,1
"A flagger was trying to instruct a passenger vehicle to stop when the vehicle's side mirror struck her. She fell to the ground and the truck ran her over, breaking her leg and hip. She was hospitalized.",1
"An employee was struck by a stand-up lift while walking, suffering a left-foot degloving.",1
"An employee was using a hand truck to deliver a 160-pound beer keg to a basement. The keg fell off the hand truck, causing the employee to lose his balance and fall down the steps to the floor. The employee was hospitalized for surgery to treat a severe break to the foot/ankle.",1
"While standing on a bumper checking water levels on a truck, an employee slipped and fell to the ground. The employee was hospitalized with a broken right wrist.",1
"An employee was helping a client load a metal door into a dumpster. His hand was on the edge of the dumpster and, as they were lifting the door into the dumpster, his right little finger was caught between the door and the dumpster. As a result, he suffered a partial amputation of his right little fingertip.",0
"An employee fell while walking, landing on the floor and hitting their right elbow. The employee suffered a dislocated elbow and broken arm and was hospitalized.",1
"An employee was using a rolling ladder to stock shelves. When he stepped onto the rail, the ladder shifted, causing him to slip and fall to the ground. He suffered a concussion and required stitches to his head. The ladder was not locked into place at the time of the incident.",1
"An employee was taking speed shoring out of a truck when it opened, pinching off the employee's little finger.",0
An employee was exiting the back of a trailer when he fell to the ground and broke his leg in several places.,1
"While building a platform to cover an elevator shaft, an employee slipped and fell 8 feet to the ground. The employee suffered broken ribs.",1
"An employee was loading a press machine when another employee suddenly started the machine. The injured employee's left hand was then caught between the press machine, fracturing fingers.",1
"An employee was climbing the stairs on a coker unit to reach a crane cab. A drum of coke was cut open, releasing steam and hot gases; the employee suffered first-degree facial burns and second-degree burns to the left wrist.",1
"On September 12, 2018, two employees were operating the press brake. One of the employee's left hand was caught in the point of operation and crushed by the press.",1
"An employee was exiting a front-end loader cab using the ladder and grab rail when the employee fell backwards to the ground, suffering a possible skull fracture.",1
"An employee was reaching for an item on a shelf in a storage room when she turned and tripped over the wheel of a portable dialysis machine. She fell to the floor and landed on her left kneecap, breaking it and requiring hospitalization and surgery.",1
"An employee slipped and fell off a roof while performing maintenance work, suffering a fractured femur.",1
"A forklift went out of control, breaking through a chained roll-up door opening, skidding out, and tipping over in a loading dock. Its operator's right ankle was broken against the floor.",1
"An employee tripped and fell to the floor while walking down a hallway, suffering a right hip fracture.",1
"An employee was checking a noise on a rapid packer machine when the machine cycled. Its die caused a crushing injury to the employee's left index, middle, and ring fingers.",1
"An employee was driving a powered pallet jack when the employee was caught between the jack and a cantilever rack, fracturing the left leg.",1
"An employee was delivering shingles to a customer on the roof of a house. The employee fell from the roof edge, landing on the ground 12 feet below and suffering injuries to the nose and cervical vertebrae.",1
"Employees were using a machine to remove a phone pole on the street. After the pole was pulled from the ground, an employee's left middle finger was crushed between the pole and the concrete. The fingertip was amputated.",0
"An employee was slicing a zucchini on a floor mixer with a slicer attachment when the zucchini became lodged in the slicer. The employee was attempting to dislodge it when the top portion of the employee's left ring finger was caught in the slicer, resulting in a partial finger amputation.",0
"An employee was performing abrasive blasting when a pipe made contact with his blasting hood and slid down his chest and waist area, knocking him to the ground. He suffered fractures on his spine and pelvic area.",1
"An employee was removing yard debris from a residential customer's home. He stepped up onto his truck to remove a pitchfork, lost his balance, and fell to the ground, fracturing his right leg. He was hospitalized.",1
"An employee was cutting metal with a radial arm saw when the material kicked back, causing the back of the employee's hand to touch the sawblade. The employee suffered a laceration.",1
An employee was lifting the locking mechanism of a trailer when it snapped down and severed his fingertip.,0
"A stand-up lift struck an employee, causing a degloving to his left foot.",1
A nurse was administering medication to a resident when she tripped on a light cord and fell to the floor. She suffered a broken right hip and was hospitalized.,1
"An employee was repairing an air handler pulley when his right hand was caught in the belt on the pulley, causing a partial amputation to his right index fingertip and deep lacerations to his middle finger.",0
"An employee was helping another employee move a generator when he stepped onto a skylight that had been coated over. He fell about 13 feet to the concrete floor, suffering a fractured rib and internal bleeding.",1
"On September 13, 2018, an employee was climbing through an air vent to access a locked garage when the employee fell from the air vent to the ground, breaking the right ankle and requiring hospitalization.",1
"An employee was descending aircraft stairs, tripped on the second to last stair and fell striking their back on the last stair near the ground. The employee sustained three inflamed discs.",1
"A temporary employee was removing a garage door coil spring from recycling equipment. The spring retracted, lacerating the employee's left hand and breaking two of his fingers.",1
"An employee slipped and fell on a wet floor, breaking her wrist and knee. She was hospitalized and had surgery.",1
An employee sustained a broken right ankle while stepping off an electric pallet jack.,1
"An employee was securing a trunnion to a gantry crane with bolts. A bolt slipped while he was tightening it, and his fingers were crushed between the wheel assembly and the blade of a forklift. The tip of his left index finger was amputated.",1
"An employee was walking down the hallway when she tripped and fell on the floor, suffering a hematoma on the forehead and subdural bleeding.",1
"An employee was using a hand truck to move a sofa down a staircase when the employee's finger was caught between the hand rail and hand truck component, resulting in a right index fingertip amputation.",0
An employee was directing an excavator in the installation of water piping. The employee's left middle finger was caught and fractured between the excavator's quick disconnect and a piece of lumber. The employee was hospitalized for surgery.,1
"An employee tripped while walking down a hallway, falling to the floor and suffering face, nose, and right arm injuries.",1
"While building a shipping crate, an employee tripped on a nail gun's air hose. The nail gun shot a nail into the employee's left ankle.",1
"An employee was standing in front of a tractor trailer that had been brought into a customer dock area to unload product. The truck began rolling, pinning the employee against another truck in the dock area. The employee suffered head trauma, sternum damage, and broken ribs, and was hospitalized.",1
"An employee tripped and fell to the floor while walking down a corridor, suffering a compound fracture of the left arm.",1
"An employee was climbing down a 10-foot jobsite wooden ladder from floor 8 to floor 6 1/2. The employee slipped and fell 10-12 feet, striking against the brick wall with his head and body and landing on his right leg. His right femur was broken.",1
A maintenance employee was replacing a ball valve on a pump in a wastewater treatment system when she knelt in a puddle of 20% sodium hydroxide and sustained caustic burns on her right knee.,1
An employee was checking a cooling fan when it cut his right thumb and broke the bone. He was hospitalized.,1
"An employee was acting as a fire watch during operations to weld off steel beams when a steel beam came loose and fell onto his left hand, resulting in partial amputations to four fingers (up to first knuckle) and lacerations to the wrist, face, and ear.",0
"On September 13, 2018, an employee was attempting to move a stuck battery from a heat seal machine when the employee's left index finger was caught between the lid and body of the battery, causing an amputation.",0
The injured employee was stripping concrete forms from jersey barriers in the crane staging area. An overhead crane (crane 1) had the form lifted up just enough to take the weight off it so the concrete could cure. Another employee was operating a mobile crane (crane 2) to move concrete forms into place in the staging area. Crane 2 bumped into crane 1 moving crane 1 slightly out of place. This caused the concrete form to fall over and knock the jersey barrier over onto the injured employee. The employee was hospitalized for fractured vertebrae in the back and a lacerated kidney.,1
An employee sustained a broken hip after tripping on shrink wrap and falling to the same level.,1
"On September 13, 2018, an employee was framing a home when a wall that was being moved by a telehandler lift fell over and struck the employee. The employee suffered a broken pelvis.",1
An employee fell off a bakers scaffold.,1
"A maintenance employee was repairing a chicken grill. As he was lifting the steel top of the grill, it fell on his left hand and severed his index fingertip.",0
"An employee was attempting to remove a wire from inside a fence line machine when the machine cycled, trapping the employee's lower right leg. The employee was hospitalized with a broken right tibia and fibula.",1
"On September 13, 2018, at approximately 11:00 p.m., an employee operating a CNS computer identified a blocked photo eye and used water to clean the photo eye.  The employee then saw wood in the machine and was attempting to remove it when the employee contacted the spline remover, resulting in an amputation of the right hand.",0
"An employee was using an electric pallet jack to pick cases of beer on a warehouse floor. His jack came into contact with another one as he was stepping off it, and his left foot was pinched between the two pallet jacks, suffering bruising and swelling. He was wearing safety shoes.",1
"An employee was taking a stainless steel cutting machine down from a shelf when the machine fell and struck her head, causing blunt force trauma.",1
"A lease employee was on an A-frame ladder, testing wires for live electrical service. When he made the tap, he was shocked. He fell about 4 feet onto concrete, breaking his left hip, left scapula, and right shoulder.",1
"A temporary employee was working from a metal ladder, troubleshooting a lighting problem. The employee was shocked and thrown from the ladder, suffering injuries including (but not limited to) a broken hip and broken ribs. The employee was hospitalized.",1
"An employee was tightening a bolt to begin the starting process for a coiling machine. The tool being used to tighten the bolt slipped off; the employee fell to the floor, suffering a head laceration.",1
"After working in the heat for the past 2.5 days, an employee experienced excessive sweating and occasional vomiting and nausea. He was hospitalized for dehydration and a muscle injury.",1
"While installing a metal roof, an employee fell 5-6 feet to a lower working surface. The employee suffered a broken vertebra and was hospitalized. Fall protection was not in use at the time of the incident.",1
"An employee was feeding material into the in-feed trough of a saw. While the material was being automatically fed by the in-feed device, his right hand came into contact with the activated blade, resulting in the amputation and partial amputation of his right index, middle, and ring fingers. The saw blade was guarded at the time.",0
"On September 13, 2018, an employee was attempting to clear a jam in an automated rubber cutter when the cutter lacerated his right index finger. The rubber cutter was guarded and running at the time of the incident.",1
An employee was climbing into the passenger side of a truck cab when the truck moved forward and ran over the employee's right leg. The employee was hospitalized with a fracture to the right upper leg.,1
An employee was climbing up and over a concrete wall and broke his fibula when he jumped down from the wall to the ground.,1
"An employee was cleaning a filter basket with a 40,000 PSI pressure washer when the water gun rotated towards the employee and the pressurized water blast lacerated his right arm. The employee was hospitalized and the arm was amputated.",1
An employee was delivering feed to a site when he picked up a gallon jug of an odorless cleaning chemical (sodium hypochlorite) and drank it. He suffered internal burns from the corrosive chemical requiring hospitalization.,1
"At about 1:30 p.m. on September 14, 2018, an employee descending a stairway while sweeping the stairs. The employee fell to the ground at the last step, suffering a broken left ankle.",1
"An employee slipped, suffering a broken leg.",1
"On September 14, 2018, an employee was repairing a combine feeder house from a stepstool when the employee fell approximately 24 inches onto the concrete floor and broke the right hip.",1
"An employee fell while sweeping in a freezer, suffering fractures.",1
A pallet jack and an order picker collided. The pallet jack operator's right lower leg was injured.,1
"An employee was going up an aisleway while operating his pallet jack when his foot was crushed between his pallet jack and a stationary pallet jack, requiring hospitalization.",1
"An employee had put his foot on a man lift when another employee turned on the man lift and the first employee fell on his face, suffering head and back injuries.",1
"On September 14, 2018, an employee was changing out a plate on a grinder. The old plate became free, and his finger was caught between it and the new plate. He suffered a fingertip laceration that required medical amputation. The grinder was locked out at the time of the incident.",0
"An employee was inspecting bumpers on a paint line when his foot became stuck in a 4-inch gap on the floor, causing him to trip and fall. As he tried to catch himself, his hand/arm struck the metal frame of equipment and were fractured, requiring hospitalization.",1
"An employee was cleaning a tortilla machine when the employee's right hand was caught in the gears/chain, causing a muscle injury that required surgery.",1
"An employee was working in a residential attic when he fell through the ceiling. He landed on the residence's floor, injuring his left ankle.",1
"An employee was loading wood onto a conveyor that carried the wood away from the employee when a piece of wood became jammed. The employee hit the reverse button and the piece of wood started to come back toward the employee. The employee reached down and grabbed the nearest end of the piece of wood. The conveyor pushed the piece of wood against a metal guard and the employee's thumb tip was caught between the wood and metal guard, resulting in a thumb tip amputation.",0
An employee was cleaning debris out of a machine's door jamb when the door closed on his left middle finger. The tip was amputated.,0
"An employee was un-banding a coil on the forks of a forklift. When the banding was cut, the coil fell forward and the employee was caught between the mast of the forklift and the coil. The employee was hospitalized with a broken clavicle, scapula, and finger, as well as broken ribs.",1
"While making rounds during unit startup, an employee suffered respiratory irritation, possibly due to chlorine inhalation.",1
"At 8:20 p.m. on September 14, 2018, an employee was descending a ladder when he fell into a small cart, suffering an injury. He was hospitalized for surgery.",1
"An employee had been performing helper duties on a blast furnace, including cleaning/loading the mud gun, installing the slag dam, and cleaning the sides of the trough, when he was overcome by heat approximately 6.5 hours into his shift. He suffered heat-related illness, cramping in his arms, and loss of consciousness.",1
An employee was adjusting the blade tension on a band saw when the blade amputated the employee's fingertip. The band saw was running at the time of the incident.,0
"An employee was compacting dirt using a plate compactor when a rubber-track mini-excavator ran over his left foot, breaking two bones.",1
"An employee tripped and fell to the concrete floor, breaking his left forearm.",1
"An employee was preparing to cut the tap to a telecommunications cable. The mid-span line his ladder was leaning on was cut, and he fell 20 feet from his extension ladder to the surface below. His left shoulder blade was shattered.",1
"An employee walked and slipped on the ground level of a terminal, fracturing his right arm.",1
"An employee was walking on the top of the back of his semi trailer (flatbed) where he just finished securing a load when he tripped on the top surface of the flatbed trailer and fell to the concrete slab he was parked on (fall distance height of 3.5'). He fractured his right scapula, right clavicle, and one to four right-side ribs, requiring hospitalization.",1
"An employee was guiding boxes through a transition point between two conveyors when the employee's left hand entered a gap between the conveyor belt and the frame, fracturing the left index finger.",1
An employee was attempting to cut off some strings from a set of rollers when the belt being rotated by the rollers caught his scissors and amputated his right middle and ring fingertips. The machine was running at the time of the incident.,0
"An employee was performing preventive maintenance on an overhead conveyor. While he was removing a belt from a pulley, his gloved hand slipped between rollers and was pinched causing an avulsion injury requiring hospitalization.",1
"The rollers of a mangle caught an employee's right arm, causing a crushing injury. The employee was hospitalized.",1
"An employee experienced heat-related illness and cramping while working outdoors, requiring hospitalization.",1
"Two employees were using ATVs to help transport a 236-foot length of pipe. One ATV struck the other, causing it to roll over; its driver suffered broken legs, a broken pelvis, and a hand laceration. The driver was hospitalized. One of the driver's legs was amputated.",1
"An employee was replacing a roof panel on a storage building when a panel gave out and the employee fell approximately 9 feet onto a concrete block, fracturing bones in the face. The employee was hospitalized.",1
"After loading and unloading parts off an inspection conveyor system, an employee switched to inspecting parts in a black light room. He began to feel unwell and lost consciousness, falling backwards and striking his head on the concrete floor. He sustained severe head trauma and was hospitalized with a brain bleed.",1
"On September 14, 2018, an employee was checking oil levels in units. While manually rotating a unit's door, the employee's left ring finger was caught between the door and a water coupler, resulting in an amputation.",0
"An employee was working on a gift wrapper machine when she collapsed and struck her head on an adjacent conveyor. She got up and then fell again, striking her head on a pallet and then the concrete floor. She was hospitalized.",1
"An employee was placing plywood down on flooring at ground level when he tripped over a gap between two pieces of plywood, causing him to fall and fracture his right arm.",1
"An employee was recording patient information at a hospital while a crew was performing cleaning operations nearby with a bleach-based cleaner. The cleaner triggered an asthmatic reaction in the employee, who required hospitalization.",1
"An employee was cleaning the pan under a separator water reuse screen. His left hand touched the screen drum gear, and it amputated the tips of his index and middle fingers.",0
An employee was working on a machine when it caught his glove. His right thumb was deeply lacerated.,1
"An employee was operating a core bag machine when he attempted to straighten a bag and his left ring finger became tangled in the bag material, causing an amputation to the left ring finger.",1
"An employee was walking between an aisle that was lined with ropes when the employee stepped over the ropes. The employee's foot became caught on the ropes and the employee fell to the concrete floor, fracturing both arms.",1
"On September 15, 2018, an employee removed a pipeline cap on a CIP line and was burned by hot water and chemicals. The employee suffered burns to the face, back, arms, and legs.",1
"At about 5:00 p.m. on September 15, 2018, an employee was driving a utility vehicle at a natural gas pipeline site when it flipped over. The employee suffered a potential stomach tear and was hospitalized.",1
An employee was stocking freight and suffered a heart attack.,1
"An employee was using a ratcheting air tool to remove bolts from a tower when the employee's left third finger was caught in the tool, resulting in an amputation of the distal phalanx.",0
An employee was operating a meat cutting machine when the blade sliced off the top portion of his right thumb just behind the fingernail.,0
"While re-roofing a home, an employee fell off the one-story roof to the ground. The employee suffered a broken forearm.",1
"An employee was vacuuming and washing a confined space hole when he suffered from carbon monoxide overexposure, requiring hospitalization.",1
"An employee was working on a hydraulic dock leveler at a loading dock door. The lift fell and struck him on the head/neck, breaking his C5 vertebra. He was hospitalized.",1
An employee was burned when diesel fuel was thrown into the firebox of a kiln and a fire started. The employee was hospitalized.,1
"An employee was assembling part of a tie rod section using a power-assisted tool. His fingertip was pinched when the tool moved, resulting in a fingertip amputation.",0
An employee was carrying dishes from the line to the dish station when the employee tripped over a container of oil and fell. Some glass from the dishes lacerated the employee's leg. The employee was hospitalized.,1
"An employee was manually resetting a nut feeder when his right index finger was pinched by the weld gun and nut guide, resulting in an amputation.",0
An employee was unhooking a tractor trailer in a parking lot. The employee fell and was impaled by a piece of rebar. The employee was hospitalized.,1
"An employee was helping close the dividers separating ballrooms in a country club. Her hand was caught between two moving panels, which amputated her middle finger midway up the fingernail and crushed her ring finger up to the beginning of the nail.",0
"An employee was on a blowout preventer (stationed on a pressure control trailer), using a wrench to align the tool trap. The wrench slipped and the employee lost his balance, falling about 7.5 feet and injuring his wrist, hip, and shoulder.",1
"While getting an 8-pound container of cider out of a box, an employee felt a pop in the back and became unable to walk.",1
An employee was driving a straddle when the equipment tipped over.,1
"An employee was picking up a spare tooth from under the wheel of a ditching machine when the machine operator lowered the crumming shoe, striking the employee. The employee suffered bruised lungs and a bruised abdomen, as well as two broken ribs.",1
"An employee was adjusting a pipe with a cheater bar when the pipe struck him and he fell on his side, breaking his hip and requiring surgery.",1
"An employee was obtaining shift change information in a patient's room when the employee suffered respiratory issues as a result of a deodorizer that was sprayed in the room, requiring hospitalization.",1
An employee's finger was caught in an opening at the bottom of a sorting bowl when the bowl engaged. The finger was amputated to the first knuckle.,0
"An employee was helping to place a paper roll on a machine when the cable for the pulley came loose. While he was helping get the cable in the right place, the machine started up and pinned his left middle fingertip between the pulley and cable, resulting in a fingertip amputation.",0
An employee was positioning molds onto a car using a remote control crane when the two molds that were on the crane moved and pinned his leg between the two molds on the crane and the two stationary molds. His right femur broke.,1
"At approximately 1:15 PM, was accommodating an empty bucket  to sit on it when a snake bit his left hand, requiring hospitalization.",1
An employee was walking down a stairwell when she tripped and fell down 10 steps. She suffered a subdermal hematoma.,1
An iron worker was injured when a clamp fell approximately thirty-five feet and struck the employee in the head.,1
"On September 17, 2018, an employee was testing a steel hammer handle in the gripper of an all-steel handle rougher when the employee's hand was caught between the steel hammer handle and a 50-grit belt, avulsing the employee's posterior right hand.",1
"An employee was descending from the driver-side platform of a lift truck when he slipped and fell approximately 3 feet from the platform onto the ground. He suffered a partial lung collapse, three fractured ribs on the right side of the ribcage, and a displaced sternum.",1
"An employee was cutting bands around a pipe bundle. When the last band was cut, the pipes shifted and one struck his right shin, causing three fractures to his right tibia.",1
"An employee was using a pneumatic staple gun when the employee's knee bumped the staple gun, causing it to fire a 2-inch staple into the employee's right knee.",1
A spreader chain was holding a tailgate open. The employee pulled the chain out while the employee's finger was between a box and the gate. The tailgate then smashed and severed the employee's right ring fingernail and index finger at the distal joint.,1
An employee's right ankle turned and broke while he was walking between two houses. He was hospitalized.,1
"An employee was standing at a table when a cart of metal plates came by and some plates fell off, causing him to stumble backwards, trip over a pallet, and hit his head on the concrete floor. He was hospitalized with head trauma and a concussion.",1
"An employee was working at a store cash register when an individual robbed the location at gunpoint and demanded money from the employee. When the robber began to flee the store, the employee chased after the robber and was shot in the arm.",1
"An employee pulled a muscle while lifting a table, suffering a hernia to the lower torso area that required hospitalization.",1
"An employee was placing a chain around a steel coil to pick it up with a crane when the steel coil slipped and rolled out onto the employee's right foot, breaking it.",1
"An employee was operating a bag-making machine. One of the bags had lodged at the point between the machine and the offloading chute. While the employee was trying to clear it, the machine cycled and the press plate closed, pinching and injuring her fingertip. The nail and a small part of the fingertip were torn off. The machine was guarded at the time of the incident.",0
"An employee was on the third rung of an A-frame ladder applying caulking to a wall when the employee slipped and fell off the ladder, fracturing both ankles.",1
"An employee was using a circular saw to cut a wood wedge when the saw struck a knot in the wood and kicked back, partially amputating the employee's thumb tip.",1
An employee was changing the tools on an auger driller. The employee's right middle finger was caught between the kelly bar and the slide box. The finger was amputated.,1
"An employee was walking down an aisleway. A forklift struck her while backing up, breaking her left wrist.",1
"An employee was coming down the stairwell and using the handrail when another employee started up the stairwell. As the first employee was crossing over to the other side of the stairwell, she slipped and fell, landing on her wrist and backside. She suffered a collapsed vertebra in the thoracic region and a fractured left radius.",1
"An employee became faint after receiving an immunization and fell down stairs, breaking her kneecap.",1
"An employee was using a power saw to rip 2x4 lumber. The lumber kicked back, striking the employee's hand. The employee's left middle fingertip was amputated; the little finger and ring finger were lacerated, with tendon involvement.",0
"An employee was casing mail when the employee became lightheaded due to possible dehydration, requiring hospitalization.",1
"An employee performing carpentry work fell from an 8 foot stepladder to the ground below and sustained a broken right wrist, bruised chest, and bruised face, requiring hospitalization.",1
"An employee was using an electric miter saw to cut aluminum extrusion frame parts for a bulletin board cabinet. He began to pull a remnant piece of the extrusion from the saw to place in a recycling barrel. The end of the extrusion inside the saw was grabbed by the spinning saw blade and pulled into the machine. The blade lacerated his right index finger, which was medically amputated between the first and second joints.",1
"A maintenance employee was attempting to clear out a rotary valve on a dust collection system when the valve struck his left index finger, resulting in a fingertip amputation.",0
"An employee was placing a wooden spacer between slit steel coils (weighing approximately 600 pounds) to transport them by crane when a coil shifted and fell on the employee's legs, crushing them.",1
"An employee was performing a pre-cording operation, which is part of the manufacturing of snowmobile tracks. While pulling a cord tight, the machine caught and amputated the tip of his left little finger.",0
"An employee slipped on an anti-fatigue mat and struck his head on a cabinet, lacerating his ear and fracturing his neck. He was hospitalized.",1
"An employee was attempting to unjam lead ribbons in a mill machine when his right index finger became pinched between two pieces of lead, amputating his right index fingertip.",0
An employee was hospitalized for heat stress and dehydration after working indoors for a couple of hours.,1
"An employee was hooking up a chipper to a truck. The chipper was resting on a jack stand; the truck hit the chipper as it backed up and knocked it to the ground. As it fell from the stand, its neck/tongue hit an employee's lower leg, causing a spiral fracture.",1
"An employee was using a chop saw to cut a 10-inch steel pipe that was suspended in the air using a telehandler. A piece of cut pipe fell to the ground and toppled over, striking the employee. The employee was hospitalized with a broken left leg and right ankle.",1
An employee fell while moving household items into a moving truck and hit his head.,1
"An employee was holding a bearing and shaft while using a hammer when the hammer hit his left middle finger, causing an avulsion that resulted in a surgical amputation at the first joint.",0
"An employee was removing a metal ring from a concrete mold when the employee's finger was pinched between the metal ring and the concrete mold, resulting in a finger amputation.",1
"An employee was operating a forklift to pull a load of wood pulp from a three-high stow in a warehouse. He grabbed a load from the stack with the clamp and was backing out when the load pulled an adjacent bundle, causing it to become unstable. The adjacent bundle fell against the forklift mast, causing the forklift to tip over. The employee suffered a left forearm laceration and a crushed left leg above the ankle, which required amputation.",1
"An employee was working on a propane cylinder, switching out a valve that was placed in a cement vice on the floor. He attempted to use a breaker bar to remove the bar when the strap slipped and he fell onto the concrete floor, breaking his hip and requiring hospitalization and surgery.",1
"An employee was climbing a ladder up a scaffold that he was erecting. He was carrying a section of the scaffold in his hand when the section became caught on the scaffold, causing him to lose his balance and fall approximately 8 feet. He suffered a cerebral injury, bruising, internal bleeding, loss of feeling in his legs, and paralysis.",1
"An employee was standing on pallets, about 3 feet off the floor, scanning boxes with an electronic scanner. He fell to the floor, breaking his left wrist. He was hospitalized.",1
"An employee was stacking parts using a jib crane when his finger became stuck under a metal sheet he was lifting, causing a partial fingertip amputation.",0
"An employee was slicing ham on a band saw when the ham became caught on the blade. The ham lifted and rotated sideways, causing the employee's hand to slip and contact the blade. The employee suffered a laceration/partial amputation to the left index finger and a small laceration to the left ring finger.",0
Employees were pulling a fiber optic cable with a rope attached to an ATV when the rope snapped and struck an employee on the left arm.,1
"An employee was cleaning press rollers with a rag when his rag was caught between both rollers, pulling his fingers into the nip point between the rollers. The skin was torn from his fingers.",1
"An employee used an air powered grease gun to grease a skid steer following track repairs. As he was rolling up the grease gun and hose, the trigger was pulled and grease injected into the palm of his left hand, requiring hospitalization and surgery.",1
An employee was operating a planer when it amputated all five fingers of his left hand.,1
"Employee was using a stand-up forklift to load a pallet onto the a truck. As his lift backed up, it struck the closed door of another truck. He suffered a fracture to the left pelvis and was hospitalized.",1
"An employee was operating a forklift when its mast lowered, lacerating the employee's right arm.",1
"An employee experienced an unpleasant situation and started to hyperventilate, requiring hospitalization.",1
"An employee was in a truck-mounted aerial lift, trimming trees around a power line. The edge of the lift caught on something, then jerked free, throwing the employee out. The employee fell about 30 feet, landing on the ground and suffering a broken back and head trauma.",1
"An employee was on a ladder next to a wooden wall when the wall bracing broke off, allowing the wall to fall and knock into the ladder. The wall fell on the employee's ankle, fracturing it and requiring surgery.",1
"An employee was assembling truck wheels for tank cars. When he cut the banding straps from side frame parts, the side frames fell on and struck his leg below the knee, fracturing his shin. He was hospitalized.",1
An employee suffered severe cramping after completing a mail route. He was hospitalized for heat exhaustion.,1
"An employee was on a 5-foot tall scaffold painting above pipes while holding onto another pipe when the pipe broke and the employee lost his footing, falling to the concrete floor. He hit his head and landed on his shoulder, suffering a scalp hematoma, fractured shoulder, and fractured vertebra. The scaffold was unguarded at the time of the incident.",1
"An employee was working in a boom lift to take measurements for a replacement panel when the weld between the boom lift mast and jib broke, causing the employee to fall 12 to 15 feet within the basket to the ground. The employee fractured six ribs.",1
An employee was preparing to connect a tow dolly when it pinned and crushed his left hand. He suffered a broken index finger and severe bruising.,1
"An employee was ripping a 2/4 plank on a table saw. As he reached to grab the 2/4 plank, the saw blade lacerated his right index finger and thumb, requiring hospitalization. The saw blades were unguarded at the time of the incident.",1
"An employee fell from a scaffold to the ground while removing foundation pins, suffering a broken pelvis.",1
"An employee was using an air wand to align a conveyor belt when the belt caught and pulled the air wand, sending the employee's hand into the equipment. The employee suffered a laceration to the left-hand little finger, resulting in a partial amputation of the fingertip. The conveyor was energized and running at the time of the incident.",1
"A temporary employee was putting a cylinder on a pallet when his left hand was smashed between the pallet and cylinder, resulting in a fingertip amputation.",0
An employee suffered an amputation injury.,0
"A maintenance employee was releasing pressure off a valve in the melt shop when a pipe failed and ruptured. The metal pipe, under pressure, struck the employee in the head and face, causing an injury that required hospitalization.",1
"An employee was operating a forklift when he turned into a cross aisle that went into a freezer and hit an upright rack. His left foot was pinned between the forklift and the rack, breaking three toes and requiring hospitalization.",1
An employee as working on a cover on a barge when the cover slipped and the employee fell about 20 feet to the bottom of the barge. The employee broke his left femur and was hospitalized.,1
"A 488-pound metal tank flange dropped from an overhead crane connection and struck an employee's right hand, fracturing four fingers.",1
"An employee was observing as a forklift operator removed a voltage regulator from the assembly line when the load became unbalanced and began falling from the forklift. The employee was struck by the falling product and fell to the concrete floor while moving away from it, straining his right shoulder and left knee.",1
"At about 11:40 p.m. on September 18, 2018, an employee was backing up a stand-up forklift in a warehouse. The forklift struck another, stationary forklift; a two-by-four board supporting the pallet on the stationary forklift struck and broke the employee's left ankle. He was hospitalized.",1
"An employee was attempting to set a pylon when the nylon sling that was holding the vertical pipe lost some tension and slipped over the employee's left pinky finger, then cinched back onto the finger and crushed it. The employee's pinky finger had to be surgically amputated.",0
"On 9/18/2018, an employee was descending a staircase from scaffolding on an aircraft wing when the employee slipped and fell. The employee's head struck the staircase, causing an injury that required hospitalization.",1
"An employee was installing trip savors on an electrical line (13,200 volts) from an aerial lift when he attempted to tighten a bolt on a switch bracket using a cordless drill. An arc flash then occurred, resulting in second degree burns to both of his hands. He was hospitalized. Rubber gloves were not worn at the time of the incident.",1
"An employee was using a pneumatic butterfly valve to mix flour and sugar when the flour stopped feeding from above. The employee was attempting to clear the flour when the pneumatic valve closed on the employee's right-hand fingers, resulting in a fingertip amputation and a right ring finger amputation.",1
"An employee was descending from the 6th to the 5th floor when she fell down the stairs. She fractured her elbow and cut her head, requiring hospitalization.",1
"An employee lost consciousness while preparing food and fell to the floor, suffering a broken left hip.",1
An employee suffered an amputation to his right hand (middle finger) while using a band saw to cut meat.,1
"An employee was changing socket blocks when he slipped on a box of rags and fell to the floor, breaking his right femur.",1
"An employee became overheated, lost consciousness, and was hospitalized for dehydration.",1
"An employee fell approximately 9 feet from a basement wall to the concrete floor while installing anchor bolts due to possible heat exhaustion, suffering a broken neck and spinal injuries.",1
"An employee fell from a step ladder to the ground, suffering an injured hip.",1
An employee was setting up a core drill when the bit fell and amputated his fingertip.,0
"While changing a fan on an overhead air conditioner, an employee suffered a 220-volt shock. The employee was hospitalized.",1
"An employee fell from a horse while participating in teambuilding horseback riding. The employee's head struck the ground and the employee lost consciousness, requiring hospitalization.",1
An employee was turning quickly to catch a vender's attention when she fractured her ankle.,1
"An employee started feeling hot after finishing his route as a service provider driver. He then experienced muscle cramps and vomiting, requiring hospitalization for dehydration.",1
"A laminator crushed an employee's right hand and injured his left hand. He was hospitalized, and three of his right fingers were surgically removed. The laminator was guarded at the time of the incident.",1
"An employee was struck by a brass tube at the mill, suffering injuries to the back of the head, the chin, and the chest.",1
"An employee was leaning over to pick up an air hose when his left pinky finger was run over by a motorized cart that ran on precast form molds, resulting in a partial finger amputation. The employee was hospitalized and had surgery.",1
"An employee was operating a combine to harvest soybeans when an access door became unlatched, exposing a rotating auger. As the employee attempted to re-latch the door, the rotating auger amputated the distal phalanx of the employee's third right finger.",0
"While cleaning, an employee picked up a vacuum hose to move it. The employee's hand was sucked into the hose, suffering swelling and bruising.",1
An employee's right ring fingertip was caught in a shutting door. Almost half of the last joint was amputated.,0
"An employee was making a connection for drill collars when a tong struck him, breaking ribs. He was hospitalized.",1
"An employee was offloading pallets from an aircraft onto a dolly when his right index finger was caught between a pallet and the dolly lock, resulting in an amputation of his fingertip. He was hospitalized.",1
"An employee was changing out a belt on a blasting machine when his left ring fingertip was caught between the belt and pulley, causing an amputation.",0
An employee was operating a production line that packs batteries into blister packs when the conveyor belt became jammed. The employee suffered a left index finger amputation while attempting to clear the jam.,1
"An employee was trying to remove a stuck board from a finger jointer's out-feed roller line. When the board dislodged, it kicked up and injured the employee's left pinky and ring fingers.",1
"An employee missed a step on a two-step ladder in the dock area and fell to the floor, suffering a broken right ankle and requiring hospitalization.",1
"An employee began to feel ill on September 17, 2018; after leaving work on September 19 she was hospitalized for heat exhaustion.",1
"An employee was driving a utility vehicle beside a track, towing a small trailer. A railcar mover struck the rear of the trailer, which jackknifed and struck the utility vehicle. The employee suffered fractures to the pelvic region and two ribs.",1
An employee was threading a pipe on a CNC lathe. The machine activated while he was holding a piece of sand paper between the chuck and the pipe. His right middle finger was amputated.,0
"An employee was lining up a slip sheet by hand on a pallet when a forklift operator he was working with activated the slip sheet push and pull attachment, which grabbed the employee's fingers, resulting in an amputation of the first joint of the left index finger.",0
An employee suffered a heart attack after arguing with another employee.,1
"An employee was using a lathe to machine a steel bar. The bar struck him, breaking his elbow. He was hospitalized.",1
"An employee was preparing a bread machine when the blade cycled, causing an amputation to his right index fingertip. The machine was not guarded.",0
An employee was taking cryogen readings from MRI equipment when he tripped over a cabling trough that was part of a new MRI staging set-up and impacted the floor. He suffered fractures to his left-side shoulder and hip.,1
"An employee was framing a new building. The employee fell from the building's roof to the ground, suffering broken ribs, a concussion, and possibly other injuries. The employee was hospitalized.",1
"An employee was looking for signs of mold inside an air handling unit. The unit was locked out, but outside air caused the fan to rotate. The employee's right ring fingertip was amputated between the belt and pulley.",0
"An employee was installing telephone and broadcast service. He was on a cement slab that was covering a water well at ground level. He fell off the cement slab when it collapsed, suffering leg injuries.",1
"An employee was standing in the back of an open box truck when a stack of 96-gallon garbage cans fell over, causing the employee to be pushed from the truck to the ground. The employee fractured his lower right leg.",1
An employee was standing on a piece of plastic that was on top of a piece of metal while a second employee was drilling up through the metal. The drill bit then punctured the first employee's right foot.,1
"While performing metal decking, an employee slipped and fell 14 feet to the ground, suffering a broken back.",1
"An employee was unloading dirt from the dump truck and noticed that the back door was not opened all the way. As the employee manually attempted to open it, the door slammed back down onto their left ring finger and amputated the fingertip.",0
An employee was performing a clean-out of the boiler when fire from the boiler back-flashed and caused second and third degree burns to his body.,1
"An employee was operating a compactor truck in a parking lot. The compactor tipped over; the employee was thrown out, then its rollover protection system struck his right leg, causing an amputation injury. A seat belt was not being worn at the time of the incident.",1
An employee was shocked while removing the steel cover from an underground electric pull box. The employee lost consciousness.,1
"An employee was operating an electric pallet jack when it hit a rack. His right foot was crushed between the pallet jack and the rack, requiring hospitalization.",1
"An employee was walking through a containment, verifying chemical levels, when a chemical splashed onto his left calf. He suffered chemical burns and was hospitalized.",1
"An employee was working on an underground transformer when his arm made contact with the conductor and the side of the transformer housing. He sustained an electric shock and slight burns to his right finger and right elbow, requiring hospitalization.",1
"An employee climbed onto a flatbed truck to rearrange pallets and create space for another pallet. The wooden pallet the employee was moving broke and the employee fell approximately 4.5 feet to the ground, hitting his head on a paved surface. He suffered head trauma and was hospitalized.",1
"An employee was operating a stand-up reach lift in a warehouse. As the employee stepped off the lift, it ran over their left leg crushing it. The employee was hospitalized.",1
"An employee was driving a utility task vehicle, spraying weeds on a trail at a high school. The employee became light-headed, possibly from heat stress/exhaustion.",1
"On September 20, 2018, an employee was cleaning a conveyor belt when the employee's left middle finger was caught between the belt and plexiglass, resulting in a fingertip amputation. The belt was moving at the time of the incident.",0
"An employee was lowering an electronically controlled bay door by leaning over and pushing the control button with his right hand. The bay door rolled over the tip of his left ring finger as it closed, causing an amputation of the fingertip.",1
An employee was troubleshooting a boom lift with an oil leak when the employee's left middle finger was injected with pressurized oil.,1
"While operating a clip rail machine, an employee attempted to relocate 3 x 24 inch boards along the conveyor when the employee's left index finger was caught between two boards, resulting in an amputation of the finger at the nail end.",0
An employee was changing a filter on an air conditioning unit when his ladder slipped. The employee grabbed the side of the unit and their hand struck a piece of angle iron projecting from the unit as it slid down amputating his pinky finger.,1
"An employee was fixing a tap on a sewer line. The trench collapsed, inuring the employee's shoulder, ribs, and back. The employee was hospitalized.",1
"An employee was standing next to a zero turn lawn mower when the mower operator ran over his left foot, resulting in a partial amputation of the big toe.",1
"While exiting a vehicle in a parking lot, an employee slipped in a pool of brake or power steering liquid. The employee's left ankle was broken.",1
"An employee was rigging and helping an excavator operator connect a reinforced concrete pipe when the pipe twisted and struck the employee's right femur, causing a deep contusion.",1
"An employee was going to get a drill when the employee slipped and fell on a wet floor, suffering a broken patella.",1
An employee was operating a roller/compactor when he went down an uneven slope and jumped out of the vehicle. He stepped into a rut in the side of the slope and fractured his lower right leg/ankle.,1
"An employee was attempting to position a die on a punch press machine. When the employee turned the die to position, a portion of the die fell through the hole, trapping the employee's right little finger between the die and the bolster plate. The employee's fingertip had to be amputated.",0
"An employee was sanding a portion of a work basket placed on a saw horse stand when the equipment fell onto the employee's left leg, breaking it and requiring hospitalization.",1
"An employee was wrapping fishing line onto a spinning hub when the employee's right index finger became caught in the line. The employee pulled the finger away, resulting in an amputation above the top of the nail.",0
"On September 20, 2018, an employee was cutting scrap metal with a cutting torch when the employee cut into a metal cylinder that had hydraulic fluid inside it. The torch ignited the fluid, and the employee received burns above both calves and below the waist, requiring hospitalization.",1
An employee received a right middle fingertip amputation while adjusting the main drive on a machine. The machine was not locked out and the safety cover was removed at the time of the incident.,0
An employee was verifying that ground beef transfer equipment had been cleaned. The equipment lacerated her lower left leg. The employee was hospitalized.,1
"An employee was filling up a truck at a gas station when he tripped over the gas pump hose and fell to the ground, suffering a broken collarbone and dislocated shoulder.",1
An employee's left middle finger was caught in a door and partially amputated.,0
"An employee was conducting maintenance on a conveyor belt when an electrical discharge occurred, causing burns to his right hand. The conveyor was not locked/tagged out at the time.",1
"An employee responding to an electrical outage made contact with an energized, 5,000-volt electrical line, suffering an electrical shock that required hospitalization.",1
"An employee was stepping up into a truck when he missed a step and fell to the ground, breaking his hip and requiring hospitalization.",1
An employee was working with window frames in an aluminum extrusion machine. The machine kicked a frame back and it lacerated and broke the employee's thumb. The employee was hospitalized.,1
"An employee was on a stepladder removing a sling from a lifting lug that was welded onto a 300-pound weir wall when the lock nut came loose from the bolt, causing the weir wall to fall and knock the employee 4 to 5 feet off the stepladder to the ground. The employee suffered a lower right leg fracture.",1
"An employee was repairing a steam condensate line. The employee removed a flange and steam condensate was released, causing first and second degree burns to the employee's upper body.",1
"An employee was attacked by another employee over a work disagreement. He was thrown on the floor, hitting and injuring his head.",1
"An employee was on a waste management collection route. The employee was reaching under a broken cylinder of a tipper area when the cylinder crushed the employee's forearm, resulting in soft tissue damage. The employee was hospitalized.",1
An employee was operating a forklift when it ran over his foot. He was hospitalized.,1
"While decontaminating equipment and boots, an employee potentially came in contact with chemicals. The employee suffered an infection to both feet and was hospitalized.",1
"An employee fell backwards while exiting from a trailer. His right knee hit the tongue-side of a dolly below, before he fell to the ground. He fractured both kneecaps and suffered tendon injuries in both knees.",1
"An employee was closing a freight truck door when he slipped and fell off the bumper and struck the ground, breaking his right femur.",1
"An employee was operating rig equipment to drill and install soldier piles. The rig was traveling to the next pile location when it encountered a soft spot on the bench. The employee immediately stopped on command from the spotter. The left side track of the rig then started to sink, causing the rig to tip over on its side. The employee's left leg struck the tramming levers and computer inside the cab when the rig tipped over, suffering two fractures below the knee.",1
An employee was holding wood pieces to be cut by a bead cutter. The machine actuated and its sharp blade amputated the tip of her left middle finger.,0
"An employee was operating a tumble blast machine and dumping the blasting media from the blast onto the conveyor belt. During the process, the employee's left hand came close to the lip of a pan that was contacting the conveyor belt. The glove on the employee's hand became caught between the lip of the pan and the conveyor belt. The rotation of the conveyor belt grabbed and pulled the glove between the pan and the conveyor belt, causing a deep laceration to the employee's left hand below the thumb.",1
"An employee was climbing down a fixed ladder when he lost his grip and fell to the lower level of the building, 10 feet below. He suffered a fractured femur and a fractured back.",1
"An employee was operating a pallet jack to move pallets when she became caught between the pallet and a racking system, crushing and fracturing her foot or ankle.",1
"An employee was sitting in a chair when she dropped an item on the floor.  She reached for the item and the chair rolled forward, causing her to fall and land on her right hip. She suffered a hip fracture.",1
"An employee was plugging an electrical cord from a grill into a wall socket when a flash occurred. He was shocked and received a third degree burn to his left hand, requiring hospitalization.",1
"An auger came loose and struck an employee, breaking the employee's left arm in 16 places.",1
"An employee was helping to install routers under a table when the on switch was hit, causing the router to start and lacerate the employee from the wrist to the upper forearm. The router was not locked/tagged out at the time of the incident.",1
"An employee was operating her machine from the box packing area when a coworker asked where to place a tape gun and she pointed with her left arm to the location. At the same time, an air cylinder retracted and caught her left arm, causing an elbow dislocation, laceration, and fractured wrist.",1
"While setting up temporary traffic control, an employee was struck by a distracted driver in a work zone, suffering facial, skull, rib, and clavicle fractures.",1
"An employee was on a mobile ladder, trying to unjam a machine. The employee fell from the ladder to the floor, suffering a broken hip.",1
"An employee was cleaning a 10-inch line using a high-pressure hydro-blaster with a lance at the nozzle tip when the lance pushed back out of the pipe opening and the tip kicked, redirecting the pressurized water across the employee's left forearm and causing a water laceration.",1
"An employee was descending from an electric pole when he stepped into 6-foot tall weeds and fell backward, impaling his left buttock on a metal fence T-post that was covered by the weeds. He was hospitalized.",1
"On 9/20/2018, an employee was using a spatula to break up clumps of sugar in a commercial mixer when the mixing blades grabbed the spatula, pulling the employee's hand into the blades and resulting in an amputation of the left index fingertip. The mixer was running at the time of the incident.",1
"An employee was removing a top screen of rollers off a chute when he dropped the rollers. His middle finger was then pinched between the falling rollers and more rollers that were below, resulting in a middle fingertip amputation.",1
An employee was turning on a 480-volt breaker to reenergize machines when an arc flash burned the employee's left arm and left hand. The employee was hospitalized.,1
"A truck driver was driving around a corner on a logging road. The trailer went over the bank, causing the cab to flip on its side. The employee suffered possible internal injuries.",1
"An employee walked about 20 feet from her desk to open the front office foyer door. She tripped on the edge of a flat lobby floor mat and fell, fracturing her right shoulder and requiring hospitalization.",1
A pipe fell onto an employee breaking his femur.,1
A maintenance employee was troubleshooting/inspecting a section of a roller conveyor line on a third-level catwalk that was not functioning correctly. He was sitting on the catwalk with his legs hanging over the edge when an automated transfer car system on the second level (directly below the third-level catwalk) traveled beneath the catwalk and pinned his legs between the upper portion of the transfer car and one of the support beams of the catwalk. He was hospitalized with two fractured bones in his lower right leg.,1
"An employee and a contracted forklift operator were moving matting boards that had been stacked in two piles. The top matting board in the shorter pile was forward and off center, leaving a gap between that mat and the taller pile of mats behind it. The employee was standing in the gap. When the forklift extended forward the lifting apparatus became caught on the off-center matting board and pushed it forward. The employee's right ankle was pinched between this mat and the pile of mats behind it, resulting in a broken right tibia and fibula.",1
One employee hit another in the head with a measuring tape. The second employee was hospitalized.,1
"An employee was fitting a skirt to the center core of an upper frame for an excavator when the pneumatic clamp was actuated, making contact with the employee's left thumb and resulting in a fracture and partial amputation of the thumb.",0
"An employee had arrived at the facility and was walking into the building when he tripped on an air hose and fell on the concrete floor, suffering a hip fracture.",1
"An employee had replaced a fire extinguisher on a wall and was turning when her foot caught on the base of an air dryer. She fell to the floor, suffering a broken right arm and facial injuries (including a possible broken nose).",1
"An employee was removing crab legs from a steamer when he slipped and dropped the container that was holding the hot water and crab legs. He received second degree burns on his thighs, arms, and hands and was hospitalized.",1
"A temporary employee was cleaning equipment when an air valve actuated, closing a container lid on the employee's left forearm.",1
"An employee was trying to flip over a D ring so it could be used to secure deck cargo on a vessel. A 20-foot bundle of rebar was being held up with a pry bar so the ring could be flipped. The rebar slipped off the pry bar and crushed the employee's right index finger. The employee was hospitalized, requiring surgery.",1
"On 09/21/2018, an employee was on a step stool attempting to remove merchandise from a store shelf when she fell from the step stool and fractured her wrist, requiring hospitalization.",1
An employee was cleaning the rollers on a roll former machine when his glove was caught in a roller pulling his left hand into the machine and causing a crushing injury. The machine was running at the time of the incident.,1
"An employee was unplugging a bin on a hog feed truck when the auger caught his left foot, causing crushing and laceration injuries.",1
"An employee was trying to remove a board that was jammed in an elevator on a production machine. The board fell about 4-5 feet and struck the employee's right knee, causing lacerations and a dislocation.",1
"An employee was on the second step of a step ladder, using a box wrench to tighten a bolt on a pipe flange. The wrench slipped off the bolt and the employee fell backward, striking his head on a toolbox and losing consciousness.",1
"An employee experienced an allergic reaction to floor waxing vapors, suffering respiratory distress.",1
"An employee was searching for a water line connection in a flooded basement. He stepped into a stormwater sump pit, breaking a rib. He was hospitalized.",1
An employee fell from a residential roof to a concrete floor 12-15 feet below. The employee was hospitalized.,1
"An employee was using a rebar bender when the rebar rose up and struck his torso, causing a bruise below the ribcage that required hospitalization.",1
"An employee fell off a roof and fractured his skull, requiring hospitalization.",1
"An employee was working from a portable ladder when he fell straight down from the top of the ladder, hitting his head and breaking his ribs and clavicle. He was hospitalized.",1
"An employee was attempting to descend a ladder when the employee fell from level 6 to the concrete floor on level 5, sustaining a compound fracture to the right leg below the knee.",1
An employee was leaning on a pile of sheet metal and amputated a finger between sheets of metal.,0
An employee was hospitalized due to smoke inhalation.,1
"An employee was attempting to retrieve a plank that was stuck under a log at a log table when the log table was lowered down on his hand, resulting in a left ring finger amputation.",0
An employee slipped on a freshly mopped floor and fell fracturing her femur. The employee was hospitalized.,1
An employee was adding an extension to a rock drill when the rock drill rotated and fractured the employee's arm.,1
An employee was clearing a jam in the sludge machine when the machine cycled and partially amputated the employee's middle finger.,1
An employee was cutting a chamfer on the edge of the concrete curb with a cut-off saw. The curb broke and pinched the blade which caused the cut-off saw to kick back and cut the employee's shoulder/armpit area.,1
An employee was removing a piece of steel from the top of a mold. The employee's wrist was caught/pinched between the mold and the mold clamp.,1
"While working on a bridge, an employee was catapulted off a surface and fell 20 feet off the bridge onto a dirt embankment, suffering broken vertebrae that required hospitalization.",1
"An employee was servicing a mold in an injection molding machine. A 15-pound rack cylinder fell onto the employee's hand, causing an amputation to the right ring fingertip.",0
"An employee was on a ladder about 15 feet high repairing cable and fell to the concrete below fracturing both wrists, the right hand, the right upper leg and the right hip.",1
An employee was bagging frozen leg quarters with a machine and was attempting to remove a jammed staple when the machine activated and the employee's thumb pad was partially amputated.,0
An employee was cutting insulation from a roll with a circular hand cutter. The cutter amputated his left index fingertip.,0
"While transporting a piece of cut concrete curb that was to be removed, the curb fell off of the forks of the forklift and landed on the injured employee causing a leg fracture.",1
An employee was setting out cones in a work zone after the required signs had been set and was struck by a vehicle. The employee was hospitalized for multiple fractures of the right tibia and a single fracture of the right fibula and lacerations on the left elbow and above the left eye.,1
An employee tripped and fell while leaving a gas station store. The employee landed on the concrete ground and suffered a lung injury.,1
An employee was punching holes in steel plates and caught their hand between the punch and the steel plates causing an open displaced fracture to the middle and distal phalanx of the left index finger with injury to the distal nerve.,1
An employee slipped on water that had spilled onto the floor and fell. The employee sustained right hip and wrist fractures.,1
An employee was setting up rig equipment and pinched his right middle finger between the pipe rack and the laydown machine index arm resulting in a fingertip amputation.,0
An employee lost his footing while walking down the stairs and sustained a right ankle fracture requiring hospitalization.,1
"An employee was standing on a stepladder, replacing coaxial cable on the outside of a home. The employee fell, landing on a cable reel and suffering broken ribs.",1
"An employee was washing a vehicle with a power washer. The hose got caught and as he pulled on the hose, the pressurized water blast struck his right boot under the steel toe and caused a deep open wound on the right toe.",1
An employee was moving a printing machine when he experienced stomach pain. He was hospitalized for a hernia.,1
An employee was emptying a spinal vacuum tank. The employee's right middle finger was caught in a valve; the tip was amputated.,0
"An employee fell from a ladder, suffering bleeding from the ear as a result of the fall.",1
An employee was pushing a mobile cart (non-construction) filled with IT gear through a doorway and caught his left pinky finger in the door as it was closing resulting in soft tissue amputation.,1
An employee was showing the owner the possible issue with the electrical panel when the panel arced. The employee suffered burns to the left side of the face and neck.,1
"An employee was pushing a housekeeping cart around a corner, lost balance and fell striking her head on the floor. The employee was hospitalized for a head injury.",1
"An employee was operating narrow aisle equipment to place a wooden pallet with plastic-wrapped product in the lower level of an aisle. He was attempting to move the equipment forward when the reverse handle was engaged. The movement caused him to be pinned under the second level cross beams and the narrow aisle equipment, fracturing his right kneecap, bruising ribs, lacerating his spleen, and puncturing a lung.",1
"An employee had just put a box on the top of a cabinet. As he descended, his ring caught on a shelving bolt and his left middle finger was amputated.",0
An employee was operating the meat cubing machine when their glove was caught in the roller blades resulting in surgical amputation of the hand.,1
An employee was taking inventory of pieces of round bar. The round bar was sitting on an incline and rolled off the storage timbers striking the employee's legs fracturing both tibias.,1
An employee was standing in a row of curbing and was caught by granite curbing. The employee was hospitalized for a lower leg fracture.,1
"On September 24, 2018, an employee fell approximately 9 feet off a roof when he was taking a measurement of the gutter system. The employee was hospitalized for a fractured T6 vertebra.",1
An employee was operating a stand-up truck. The employee's hand was smashed between the truck and a storage rack.,1
"An employee was washing a car when a pressure washer sprayed his hand, lacerating it.",1
An employee was assisting another employee unchoke a lint cleaner and amputated two left-hand fingers.,1
An employee was connecting a trailer to a pickup truck and pinched their left index finger between the trailer and the ball on the trailer hitch resulting in a fingertip amputation.,0
"While working in an emergency department, an employee had an anaphylactic reaction to an unknown substance, suffering respiratory distress and swelling. The employee was hospitalized.",1
"An employee was painting a shear rack that was sitting on wheeled dollies. The rack shifted, causing the amputation of the employee's left middle fingertip in the pinch point between the rack and the dolly.",0
An electrical lineman working in an elevated bucket sustained an electrical burn under his ribs and atrial fibrillation when the rope he was using to dismantle an overhead electrical distribution system contacted an energized line.,1
An employee was removing the nozzle from the pellet barrel when hot plastic came out of the barrel and burned the employee's left arm.,1
An employee slipped and fell while walking in the kitchen. The employee sustained a fractured tailbone.,1
"An employee was delivering a load of gravel in a dump truck. The truck tipped over and the employee struck his head, suffering a concussion. He was hospitalized.",1
An employee was preparing a metallizer machine to insert a new roll of material to run for production when their right arm was caught inside the machine and lacerated.,1
"An employee was inspecting baggage handling belts. The employee's hand was caught between the rollers on a belt, causing the degloving of two fingers. The employee was hospitalized.",1
An employee was cleaning the air lock used for moving peanut flour in the conveying system. The paddles unexpectedly activated and partially amputated their right index and middle fingers.,0
An employee was handling a coral snake when she was bitten on the right hand. The employee suffered an allergic reaction and was hospitalized for administration of anti-venom.,1
An employee fell off a loading dock and fractured an ankle.,1
"An employee was realigning a cardboard lid in a lidding machine. His sweatshirt was caught on the pulley driving the machine's infeed belts, and his arm was pulled in. He sustained bruises and scratches to his right arm and shoulder and fractured his knee while trying to free himself.",1
"An employee was outside work, walking toward the emergency entrance in the rain. The employee slipped and fell, suffering a knee injury.",1
"A long-term care resident shoved an employee, causing her to fall and hit her head on a desk. She lost consciousness and was hospitalized.",1
An employee was troubleshooting a malfunctioning disengagement clutch in a wood chipper. The tip of his right index finger was amputated at the first knuckle joint by the disengagement belt and pulley mechanism.,0
An employee was watching the hydrotesting of tubing to find a leak. A release of water from the tubing sent the employee back into the tubing board; the employee suffered broken ribs and injury to their spleen.,1
An employee was working on the packaging machine and suffered the partial amputation of the left index finger.,1
"On September 24, 2018, an employee was using an electric sewer cleaning machine to unblock a drain. The coil spring got stuck and caught his left ring finger, amputating the tip.",0
An employee was trying to unclog a blowing machine when its rollers caught his right hand. He suffered injuries resulting in an amputation (of the right finger at the second knuckle) and hospitalization.,1
"An employee tripped and fell, and was hospitalized.",1
"An employee was walking over a portable dock ramp when it tipped over. He fell and the ramp landed on him, breaking his hand, right foot/ankle, jaw, and ribs and lacerating his face.",1
"An employee was on a 6- to 8-foot A-frame ladder, sawing an overhead pipe. The side of the pipe gave way and hit the ladder, knocking the employee to the ground below. The employee suffered a broken tibia and was hospitalized.",1
An employee was shearing metal and amputated the left ring and middle fingers at the first knuckle.,0
An employee was operating a forklift when the forks/mast began to raise and struck a structural steel beam in the ceiling. The collision with the beam abruptly stopped the forklift causing the employee to be ejected from the cab. The employee was hospitalized for broken ribs.,1
An employee was using steam to unclog lines. The steam burned the employee.,1
An employee was assisting with maintenance on the oscillator that was on a rack. The oscillator rolled and fell off the rack onto the employee's left foot fracturing it.,1
An employee was observing work being performed by other employees and was struck by the air horn in use. The employee was hospitalized for a head injury.,1
"An employee was setting up a mill to work on an auger. The auger fell from the jack, hitting the employee's left index finger and amputating it at the first joint.",0
An employee was troubleshooting a 277-volt light pole and suffered electrical burns to his hand.,1
The injured employee was standing on a trailer signaling a forklift operator who was loading pipe onto the trailer deck. The pipe rolled and the injured employee tried to stop the rolling pipe. The pipe knocked the employee off the trailer face first and then landed on the fallen employee. The employee was hospitalized for a fractured pelvis and collapsed lung.,1
An employee was climbing a 10-foot A-frame ladder and fell striking his head on the floor. The employee lost consciousness and was hospitalized.,1
"At about 11:30 p.m. on September 24, 2018, a temporary employee was trying to clear a jam in a lid shoot machine and partially amputated the second finger on his right hand.",0
An employee was using an order picker to place products onto a warehouse rack/shelf. The employee stepped out of the operator's platform and was struck on the head and face by two falling boxes. The employee was hospitalized for a fractured sinus cavity.,1
"While descending a ladder, an employee was struck on the neck by a battery pack and suffered a concussion. The employee was hospitalized.",1
"An employee was walking, tripped over the foot of the merchandise cart and fell. The employee was hospitalized for a fractured and dislocated shoulder.",1
An employee was installing a gas pipe at a residential construction site. He was descending an A-frame ladder when he missed a step and fell. He was hospitalized for a broken foot and ankle.,1
"On September 24, 2018, a dance professor slipped and fell to the floor while walking into her class, breaking her hip.",1
"An employee was re-roofing a residential roof in the rain. He slipped and fell from the roof, landing on the concrete ground 19 feet below. The employee suffered a broken leg.",1
An employee was installing a new drum of sealant into the road sealant machine and caught their left thumb between the compression piston and plunger assembly resulting in amputation of the distal end.,0
"On September 25, 2018, an employee was chasing after a customer to return their change when the employee missed a step on the entrance stairway, lost balance, and fell, suffering an elbow fracture that required hospitalization.",1
"An employee was cleaning up in a picking area. A forklift/picker backed over the employee's left foot and toes, causing an amputation to a toe.",1
"An employee was guiding the removal of an 8-foot piece of reinforced concrete pipe. The pipe cantilevered downward and struck the employee's left little finger, causing an amputation.",1
"An employee was shoveling inedible scraps from the floor into a small tote to dispose of them when his hand reached up and into a meat grinder's moving auger, resulting in the amputation of his left middle, ring, and pinky fingers.",0
"An employee was attempting to clear salt from an inductor. The system energized, causing a gate to close on the employee's hand. This resulted in an amputation of the right ring finger to the nail.",0
"An employee was operating a plasma table with a movable control panel when he backed into a forklift and was caught between the table's controller and the forklift, suffering a contusion to the leg. He was hospitalized overnight for internal bleeding.",1
"An employee was found unconscious after loading a wheelchair. The employee had suffered a head injury, fractured ribs, and a fractured back.",1
"While performing maintenance activities, an employee began to suffer from heat exhaustion, becoming nauseated and sweating heavily.",1
A temporary employee was funneling cat litter into small bags when a sack of the cat litter fell on him. He suffered a broken right hip and was hospitalized.,1
"An employee was working with a crew, pigging a pipe. Built-up pressure shot out a small piece of steel pipe, which struck and lacerated the employee's left leg, resulting in an amputation below the knee. The employee was hospitalized.",0
"An employee was trimming brisket when the board and the knife slipped. The knife hit her thumb; a piece of skin and the knuckle cartilage were detached, exposing the bone.",0
"An employee was adjusting a steel beam on two work horses. It fell off the horses, breaking the tip of his thumb and a bone in his foot.",1
An employee was verifying ingredients inside a tank when his hand was caught in a moving airlock on a conveyor system. Four of his fingers were amputated.,1
A temporary employee's right index and middle fingertips were amputated in a spray dryer.,0
"An employee was clearing a bottle jam from a trimmer reamer when the machine cycled and the employee's hand was caught in the machinery, fracturing four fingers and severely lacerating his hand and fingers.",1
"On September 25, 2018, an employee was walking across a parking lot when a motor vehicle struck her, causing a broken hip and broken ribs. She was hospitalized.",1
"An employee was struck by a pickup truck as it backed up, suffering head and neck injuries.",1
"While trying to straighten straps across a double-stacked, plastic-wrapped unit of lumber on a flatbed trailer, an employee slipped and fell about 10 feet to the paved ground below. During the fall, the employee struck the edge of the trailer bed. The employee was hospitalized with a head injury with brain bleeding, a cracked T4 vertebra, a cut left ear and contusions. Fall protection was not worn at the time of the incident.",1
"An employee fell off a ladder while hanging banners at a community event, suffering a contusion on his pelvis and requiring stitches between his left middle and ring fingers.",1
"An employee was descending stairs, slipped and caught their right arm on a stair stanchion resulting in a fracture to the arm.",1
"While pushing a trash cart in a hallway, the employee stepped onto the base of the trash bin and fell to the floor. The employee suffered a broken right ankle.",1
"An employee was replacing a rotating belt on a baler when the belt pulled him in. His right arm was crushed, requiring surgical amputation.",1
An employee was attempting to unjam a machine when the roller/blade amputated his left index finger.,0
"Employees were trying to connect a wellhead with a two-to-one swedge and a quick coupler. A valve was opened to route pressure through the swedge. The swedge's threads stripped and it struck an employee in the ankle, fracturing it. The employee was hospitalized.",1
"An employee slipped/tripped in a parking lot and fell to the pavement, suffering a broken and dislocated elbow.",1
"Employees were using two 10-ton hydraulic rams in disassembling a sump pump. The rams slipped from position, hitting an employee's left thumb and causing a comminuted distal phalanx fracture. The thumb was subsequently amputated at the base of the nail.",0
"An employee was inching a printing press. Two of the employee's fingers were caught in the press, suffering injuries; the employee was hospitalized.",1
"An employee was clearing jammed lumber in an edger machine. A piece of lumber flew out of the machine, striking the employee. The employee was hospitalized, having suffered injuries to his internal organs, broken ribs, and a broken wrist.",1
"An employee fell to the concrete floor while climbing down a flatbed trailer, suffering broken ribs.",1
"An employee was overseeing the changing out of product on the end of aisles after store closing. She was walking on the sales floor when she slipped and fell in the front speedway, falling to the ground and breaking her right elbow.",1
"On September 25, 2018 an employee was checking fluids in the engine compartment of a vehicle when a gust of wind blew the vehicle hood off of the hood strut. The hood then closed on the employee's left hand, resulting in a left middle finger amputation.",0
"A mechanic had just changed out a broken sprocket on a yard conveyor. The conveyor was powered up, and the sprocket broke his left little finger. He was hospitalized.",1
"An employee tripped and fell over a wheelchair. Her right knee struck the floor, and she suffered a kneecap fracture that required surgery.",1
An employee was carrying a metal piece when the employee tripped and fell. The metal piece then cut off the employee's left thumb tip.,0
"A garbage truck driver was servicing a recycling bin as part of his training. He was getting back on the truck, on the passenger side, when it began to move; he lost his footing and fell onto the road. The truck ran over his left leg, breaking it in several places. He was hospitalized.",1
An employee suffered an electrical injury.,1
An employee was helping a co-worker hang a peg board in a cottage garage when he tripped over another peg board that was propped up against a lawn mower. He fell and broke his hip.,1
"An employee was bleeding down the pressure from a well to a vacuum truck when the gas fumes ignited, causing the employee to receive second degree burns to his hands and face.",1
"An employee was cutting a 6-foot pipe with a chop saw when the blade kicked back, hitting the employee in the face.",1
"An employee fell from a roof to the ground, about two stories below. The employee suffered a fractured pelvis and sacrum, as well as a compressed spine.",1
"An employee was standing on a sitting stool when he lost his balance and fell, fracturing his left tibia.",1
An employee was hydroblasting a vertical line when the hose came out and the pressurized water blast lacerated the employee's right wrist and forearm.,1
An employee was transporting a chemical tote when it began to leak. He then slipped and fell to the ground that was covered with the chemical. The employee suffered chemical burns that required hospitalization.,1
"An employee was in an aisle writing down information about a product order when a swing reach truck ran over his left foot/toes, requiring hospitalization.",1
"An employee was bending a piece of metal in a hydraulic press. The metal shifted, striking and lacerating/amputating the tip of the employee's left index finger.",0
"An employee was feeding foil into a packing machine when the jog button was hit and his fingers became struck between two rollers, resulting in fingertip amputations.",0
"A 3-foot-diameter concrete pipe was being lifted by an excavator while a well point was removed. The load swung over and pinned an employee against a 42-inch iron pipe, causing hairline fractures to his left hip. He was hospitalized.",1
"On September 27, 2018, an employee was injured while using the elevator, sustaining a concussion.",1
An employee tripped over a vacuum cleaner cord and broke her hip on the floor.,1
An employee slipped and fell on cobblestone in a service alley near loading docks.,1
"An employee was operating a forklift to transport a pallet of shoddy pads when the boxes of shoddy pads fell off the pallet. The employee stopped the lift and was trying to exit from the right side when the employee tripped over the levers and pedal and started to fall. The employee grabbed a rack with the right hand to stop themselves from falling to the ground. However, the employee continued to fall while holding onto the rack. The force exerted on the employee's right arm caused a compound fracture.",1
"An employee was attempting to help a forklift operator load a customer's vehicle with a pallet of purchased materials. The employee's hand went under the pallet as the forklift was setting it down behind the customer's vehicle, resulting in a right little fingertip amputation.",1
"An employee was loading a flatbed trailer when the employee fell onto the blacktop ground, suffering possible broken ribs and a left shoulder dislocation. The employee was hospitalized.",1
"On September 26, 2018 an employee had been performing housekeeping duties and working with cleaners and/or chemicals when she fainted and fell to the floor, suffering abrasions on her head and the bridge of her nose. She was hospitalized.",1
"An employee was driving an electric pallet jack. The jack went out of control while the employee was avoiding an object, and the employee jumped off. The jack then ran over the employee's right lower leg, causing a broken ankle.",1
"An employee was driving around the warehouse order picking when the employee started experiencing lower back pain, requiring hospitalization for a lower back strain.",1
"An employee was inside a trailer, hand-stacking cases of tuna onto a pallet. A stack of cases fell, pinning the employee between the cases and the pallet. The employee suffered a broken left femur.",1
"On September 26, 2018, at approximately 10:30 AM, an employee was offloading two I-beams when his finger became trapped between two of the beams. As he pulled his hand away, his third left finger was partially amputated.",0
"An employee dismounted a forklift to secure pipes in a row when a pipe rolled off a rack and hit his pelvic region, causing fractures to the right side of his pelvis.",1
"An employee slipped and fell while walking down the stairs, suffering fractured vertebrae.",1
"An employee was drilling a hole in a piece of wood when the drill bit grabbed his glove and caught his right index finger, resulting in a fingertip amputation.",0
An employee sustained a fingertip amputation while using a band saw.,0
An employee fell 17 feet through a hole in a deck and was hospitalized for multiple fractures.,1
"On September 26, 2018, an employee was pressure washing a truck conveyor when he tripped over the pressure washer hose and fell approximately 14 feet to the ground below. He was hospitalized with a dislocated left shoulder and fractures to the right arm, L1 vertebra, and pelvis.",1
An employee fell approximately six feet during gaffing competency training and was hospitalized with a back injury.,1
"On September 26, 2018, an employee became ill after being exposed to Legionella bacteria in the building's HVAC system, requiring hospitalization.",1
"An employee was in the meat department, cutting pig feet using a bandsaw. One of the cases of pig feet rolled away from him and his hand was caught in the saw. The blade severely cut his finger, causing an amputation.",0
"On September 26, 2018, an employee was helping unload a concrete panel off a forklift truck onto a pickup truck bed. The panel slipped and its weight came down on the employee's little finger, pinching off the tip.",0
An employee was removing a pallet jam from a block machine when the machine's chain and sprocket amputated his right middle fingertip. The machine was not locked/tagged out at the time of the incident.,1
"An employee was standing on the ground, waiting to clear the branches/limbs that fell from a tree being cut above, when a tree limb struck his hard hat. He suffered a laceration to the back of the head and an epidural hematoma, requiring hospitalization.",1
"On September 26, 2018, an employee was using a hardware insertion machine to repair a bent metal panel. The employee was holding some scrap metal (being used to help flatten the panel) when the machine's downward-acting plunger engaged with the panel. The employee's right second finger was pinched, resulting in a fingertip amputation.",0
"An employee was putting a urinal in a dumpster when it shattered, lacerating the employee's wrist and cutting an artery. The employee was hospitalized, requiring surgery.",1
An employee was driving a forklift when he ran into a building column and fell off of the forklift to the ground. He hit his head on the floor and suffered shoulder pain and cuts/scratches. A seat belt was not worn at the time of the incident.,1
"An employee was doing maintenance work on a car. As he walked away from it, he tripped on an air hose and fell to the floor, breaking his hip. He was hospitalized.",1
"An employee was talking with a truck driver when the employee was struck and fell under the truck. The truck/trailer ran over the employee, who suffered broken bones and internal injuries.",1
"An employee was standing on a wooden platform, lifted by a fork truck, while changing rack levels for a lumber company. The platform slid off the truck's forks and the employee fell about 8 feet to the ground, landing on his back. He suffered broken vertebrae and cracked ribs.",1
An employee slipped and fell after opening a switch gear. The employee came into contact with live electrical equipment and suffered burns to both hands.,1
An employee was on a garbage route. The employee's finger was caught between the door and the hopper of a truck; the employee suffered pinched/crushed fingers and contusions.,1
"An employee was assembling a boom lift, inserting and sliding a section of boom into another boom section. The underside of her left middle finger was pinched the two sections, resulting in a partial amputation to the fingertip.",0
"On September 27, 2018, an employee was shoveling corn kernels when his hand hit the side of a conveyor, resulting in a partial fingertip amputation.",0
"At approximately 5:40p.m., an employee (positioned on the south end) was moving a laydown cart to the home position (approximately 20 feet long) with a co-worker (positioned on the north end). When the employee reached the end of the track (home position), the cart closed in on itself (accordion style cart) and pinched his right thumb between the cart frame and extension, resulting in an amputation of the right thumb tip and distal phalange.",1
"An employee was standing on the passenger-side rear step of a recycling truck, moving house to house to pick up recycling material. The sweep blade in the truck's hopper activated and began to push a cardboard box out of the hopper. As the employee tried to keep the box from falling out of the back of the truck, his foot became lodged in the box; the sweep blade came down on the box and his left foot, causing a compound fracture of his ankle as well as a muscle injury.",1
"At about 6:00 p.m. on September 27, 2018, an employee lost their balance and fell, hitting their face against the pavement. The employee suffered a cut below the left eye, head injuries, and bruising/swelling around the brain, and was hospitalized.",1
"An employee was standing on a platform spraying a surfactant onto the bed of an asphalt truck. The truck pulled next to the platform, then veered right; the platform fell over and the employee broke his left leg.",1
"An employee was walking with an electric pallet jack when he stopped quickly and the jack hit his foot, fracturing his lower leg or ankle.",1
"An employee was stepping from a picker lift truck platform to a nearby platform when the employee fell 6 to 8 feet to the ground below, fracturing a leg and requiring hospitalization.",1
"An employee was tying his shoe when he lost his balance and fell backwards, hitting and lacerating his head on the concrete floor.",1
An employee's fingertip was amputated as he operated a horizontal broaching machine.,0
"An employee was struck by an I-beam that was being hosted by a crane. The employee's lower left leg was broken, and the employee was hospitalized.",1
"An employee slipped on water while cleaning the floor, injuring the left hip and requiring surgery.",1
"An employee lost his balance and fell to the floor, injuring his right knee. He was hospitalized.",1
"An employee fell 14 feet from an I-beam to the concrete floor below, suffering head trauma and broken ribs.",1
An employee was walking behind an excavator operating in reverse. The employee's leg/foot was run over and crushed by the excavator's steel track. The lower leg was amputated at the hospital.,1
"An employee was conducting preventive maintenance with two other people. One person was responsible for turning the power switch for the motor of a rotating floor. While the motor was in operation, the employee's hand was near the pulley and his right middle finger was caught in the belt, resulting in an amputation at the top joint.",0
"An employee was installing electrical boxes when a plumbing pipe broke loose and fell on his right knee, severing cartilage and requiring hospitalization.",1
An employee suffered a heat attack while escorting a suspected shoplifter from the hospital gift shop.,1
"On September 27, 2018, an employee was replacing a bolt on the clamps of a drill rig when a clamp closed. The employee's hand was crushed, causing broken bones and an amputation of the ring finger.",1
"An employee fell from a bucket truck that was two stories high to the ground during tree trimming operations, suffering three broken ribs, a broken collarbone, and a hand injury.",1
"On September 27, 2018, an employee was adjusting a wrapper feed and caught their left index finger in a channel. The end of the finger was degloved resulting in a fingertip amputation.",0
An employee slipped and fell on slush while walking out of a freezer. The employee's right leg was broken.,1
"An employee was positioning a swivel into a cradle when the employee's right hand slipped and was caught in a pinch point between the swivel and cradle, resulting in an amputation to the right ring and pinky fingers.",0
An employee was servicing a conveyor roller when his right arm was caught in the machine. He suffered a broken forearm.,1
A yarn cabling operator's finger made contact with moving yarn. This caused an amputation of the tip of his left index finger.,0
"An employee was wearing a harness and tied off to an advertising sign that he was disassembling with an oxy/fuel torch when two fighter jets flew overhead and caused the cut members to vibrate and collapse.  The employee ""rode"" the collapsing structure down and hit his elbow on the steel, breaking a bone. The structure was approximately 17 feet in height and the employee fell approximately 6 feet.",1
"An employee was removing rubber from a sliver cutter when the employee's hand hit the handle. The cutter blade then came down on the employee's left index finger, partially amputating the fingertip.",0
"Employees were pumping concrete into a 6-foot wall. The pump was plugged, then surged, causing concrete to spray out of it in force and the hose to whip. One of the employees was struck by the hose and knocked off the wall to the ground. The employee suffered broken ribs.",1
An employee's arms were lacerated by falling metal sheets.,1
An employee was removing a pipe plug and attempting to clear debris from a rotary valve when the valve amputated the employee's right middle fingertip.,0
"While painting, an employee went to drink water out of a plastic bottle, but the bottle contained a chemical called xylene. The employee ingested the chemical and was hospitalized.",1
An employee was operating a golf cart when it flipped it over. He broke his left arm and scraped his knee.,1
"An employee was cutting tissue blocks on a microtome machine when the employee's right index finger became stuck in the blade, amputating the fingertip.",0
"An employee was cleaning a mixer when she contacted the moving mixer blade, amputating four fingers on her left hand and requiring hospitalization. The mixer was guarded at the time of the incident.",1
"An employee was trying to assemble a rocket cart. The top rack of the rocket cart was not secured and fell on her head, causing a contusion that required hospitalization.",1
An employee collapsed while leading a hiking group and was hospitalized.,1
"An employee was preparing to paint a gas tank inside of a building and was removing a valve when the tank exploded. The employee received burns to the face, both arms, and the stomach.",1
"An employee climbed into a man lift on the ground. He was about to ascend when a piece of hardened asphalt dislodged from the top of a silo, fell toward the ground, and struck his right hand. He suffered fractures and lacerations to the hand and was hospitalized.",1
"An employee was backing up a walkie rider. The employee's right leg struck a static roller section, suffering a laceration; the employee was hospitalized.",1
"An employee was working on a bridge deck when he walked across an unsecured deck mat and it slid, causing him and the mat to fall approximately 30 feet to the road surface below. He suffered arm, leg, pelvic, and skull fractures; liver bleeding; and a concussion.",1
An employee was pruning a plant when the pruning shear cut off part of the employee's left index finger.,1
An employee was moving furniture when a fingertip on her right hand was caught and amputated between two pieces of the furniture.,0
An employee picked up a dumpster from a job site location and was strapping 2 x 6 wood on a roll-off dumpster truck with a bungee cord when the cord snapped and hit the employee's right eye.,1
An employee got out of his car to go into the engine room when the car reversed over his leg.,1
"On September 28, 2018, an employee was realigning a conveyor end shaft when the conveyor amputated the tip of her left index finger.",0
"An employee tripped over an oxygen hose in a patient's room and fell, suffering a fractured hip. The employee was hospitalized and had surgery.",1
An employee's forearm was injured by flying casing material in an explosion.,1
"On September 28, 2018, at 8:00 a.m. two employees were working together to install an exhaust pipe on the rear engine compartment of airport-sized snow removal equipment. The injured employee was working from an attached catwalk on the snow removal equipment to install the exhaust pipe while the other employee was on the roof of the equipment to hold the top of the pipe and secure a bolt. While installing the exhaust pipe, the injured employee stepped back and fell approximately 59 ½ inches landing on the concrete floor below. He was hospitalized for a severe concussion, broken vertebrae in the neck and a shoulder injury.",1
"While kneeling in front of a meter cabinet, an employee came in contact with a 13-kilovolt wire within the cabinet. An arc flash severely burned the right side of the employee's body.",1
"An employee was working with a mold machine when the mold's lock slipped out of place, causing the lid to open up too far and crush the employee's finger. The employee's left ring finger was amputated, requiring surgery and hospitalization.",1
"An employee was struck by a forklift while walking to a jockey truck, suffering a broken right tibia and requiring hospitalization.",1
An employee's finger was caught between a delivery truck's lift gate and its frame. The finger was amputated.,1
"While moving freight, an employee tripped and fell from a trailer to the ground about 5 feet below. The employee suffered a fractured right elbow.",1
"An employee was unstrapping a pallet of steel product weighing 3,500 pounds when the steel product fell onto his legs, pinning him. He was hospitalized for a fractured femur and crushed ankle.",1
"An employee was pulling a utility cart when his thumb was caught between the cart's handle and a ladder, resulting in a partial amputation.",0
A service employee was walking close to the edge of a dock when he stepped off the edge but did not fall off the dock. He fractured his right ankle in two places and required surgery.,1
"An employee was steadying a glass panel in a crate with five other panels when the six panels (weighing approximately 900 pounds each) fell on the employee. The employee was hospitalized with a fractured right fibula, torn ligaments in the right ankle, and cuts to the right hand and forearm.",1
"An employee was cleaning out the inside of a bin indicator when his left hand contacted a rotary valve, resulting in the partial amputation of his index and middle fingers.",0
"An employee was holding a ladder for a coworker, who was installing wiring. A wire fell out of a box at the top of the ladder, striking the employee between the brow and the eye and lacerating the employee's cornea.",1
"An employee was packaging nuts using a bulk vacuum sealer. The sealer's press caught her middle fingertip, crushing it and causing the fingernail to be removed.",1
An employee suffered a foot injury and was hospitalized.,1
"An employee experienced cramps and difficulty breathing after rigging up on location, requiring hospitalization for dehydration.",1
"An employee was unloading a bundle of 4-inch pipe out of a cargo hole when the bundle of pipe shifted and rolled over the employee's left foot, resulting in toe amputations.",1
Three employees were attempting to relocate a shoring tower when the tower fell over and struck them. One of the employees received neck injuries and required stitches to the index and ring fingers. A second employee fractured the lower left leg and was hospitalized. The third employee received a contusion to the right hand.,1
"An employee was trying to move out of the way of merchandise that was falling off a pallet when he tripped and fell to the floor, fracturing his left hip.",1
An employee was lifting a cesspool cover when it fell on and fractured his toe.,1
"An employee was framing a floor and attempted to push the floor assembly unit using a piece of wood at the end of a pusher. When the employee actuated the pusher, the employee's left hand was caught between the floor frame and the piece of lumber at the end of the pusher, resulting in an index fingertip amputation.",0
An employee was operating a pad print press when his right middle finger was caught between two metal blocks of the press's conveyor belt. The finger was amputated above the knuckle.,0
"An employee was on a ladder, changing a battery on a motion sensor above a door. The ladder legs slid out and the employee fell to the floor, suffering a broken right arm and a laceration above the right eye.",1
An employee was attempting to move a display in a cart when the cart and the employee fell onto the floor. The employee suffered a broken right femur.,1
An employee slipped and fell on a wet floor fracturing the right hip. The floor had been recently cleaned.,1
"An employee was servicing a running ear corn picker machine when two fingers were amputated, requiring hospitalization.",1
"An employee tripped and fell while preparing fast food orders, injuring the left ankle.",1
"An employee slipped and fell to the floor while walking in the deli department, fracturing her right hip.",1
"An employee was standing on a stack of sheeting 44 inches high, adjusting a shelving unit. The employee fell backwards, striking their neck on another stack of sheeting and suffering a neck injury. The employee was hospitalized.",1
"Employees were replacing a control valve on a propane tank. A flash fire began in the tank, and an employee suffered second-degree burns to the face and hands.",1
"An employee was operating a dock leveler at a loading dock. As the leveler rose, the employee's left hand was caught between the dock plate and the flap. The employee's left middle fingertip was amputated (with no bone loss).",0
"On October 1, 2018, at approximately 2:15 a.m., during removal of asbestos containing 1/4-inch transite panels, an employee walked along the nailing strips where the panels were secured by nails to the structure. As the employee walked from the top row of panels towards the ladder access point, a transite panel broke and the employee fell 20.6 feet to the concrete surface below the roof. The employee was admitted to the hospital and treated for fractures to three vertebra and the pelvis.",1
"An employee was cleaning debris from the table top of an atomizer. The atomizer sucked in the employee's right hand, causing the amputation of the arm.",1
"An employee was removing a board from an edger when the board pinned him, causing two lumbar fractures.",1
"An employee was operating an overhead crane, using it to move a 20-ton ladle. While the employee was unlatching the safety hook, the crane moved and the hook tightened on the employee's left hand, crushing it against the ladle trunnion/bar. The employee's ring fingertip was amputated to the first knuckle, and the tip of the middle finger was crushed to the first knuckle.",1
"An employee was descending from a warehouse racking shelf to a 4-foot ladder. He fell past the ladder and landed about 7 feet below, on a trash can that had materials in it. He suffered two broken ribs and a punctured lung and was hospitalized.",1
An employee was cleaning a roll on a line. The machine activated while the employee's left hand was in the pinch point of the roll; his hand was broken.,1
An employee was using an abrasive blaster and as he set it down the high-pressure abrasive medium punctured the back of his left calf.,1
"An employee was removing a defective pipe from a pressure washer. The reservoir cover bent, causing his left foot to slide into the hot water. He suffered second-degree burns to the ankle and shin and was hospitalized.",1
An employee was blowing down equipment with an air wand. The employee's hand was caught in a belt drive. The drive was guarded at the time of the incident.,1
"While reaching into a crate of parts, an employee was bitten on the right hand by a spider. The employee was hospitalized.",1
"An employee was stamping metal with a brake press. The guard fell off and hit the brake press brake, causing the press to catch and fracture the employee's thumb.",1
"An employee was standing on the second-to-bottom rung of a step ladder, adjusting ladders on top of a van, when he fell backwards and his head struck the ground. He suffered a head laceration.",1
"An employee was hammering the ends of metal angle bars to align them. The bundle of bars shifted and fell toward the employee, lacerating his left knee.",1
"An employee was checking a grinder for product when a 40-pound block of meat fell. The employee's right little finger was caught between two metal plates, suffering a partial amputation.",0
"An employee was adjusting food in a food chopper when the blade severely injured the third and fourth fingers on the employee's right hand. The middle finger was partially amputated, requiring surgery.",1
"An employee was scraping mud off the inside of a negative paste mixer. The employee's right arm came into contact with vertical mixing blades within the machine, causing amputation of the hand and part of the arm.",0
"An employee was moving wood at a logging site when a copperhead snake bit him, causing his right index finger to swell. He was hospitalized.",1
"An employee stepped up into a truck to get his tool box, which weighed 40-50 pounds. While pulling on the box to get it out of the truck, he felt pain in his back and down his right leg, so severe that it caused him to fall back out of the truck onto the ground.",1
"An employee was feeding a planer when his heel caught on the table leg. He fell to the ground, breaking his hip; he was hospitalized.",1
"An employee was repairing a dump truck on the side of the road when his finger was caught in the pulley and belt of a compressor. He suffered a partial amputation of the left ring finger at the tip, after the nail.",0
"After working at a pellet mixing machine, an employee was found disoriented and bleeding from the head. The employee was hospitalized.",1
An employee stepped on a piece of loose plywood and fell through the floor.,1
An employee suffered an amputation to the right index finger while placing K-cups on a machine.,0
"An employee was unloading a truck when boxes of merchandise collapsed, striking him on the back.",1
"A skid steer ran over an employee's foot, breaking her right shin.",1
"An employee was using an overhead crane to flip a carbon steel metal plate, weighing 400 pounds, 2 inches thick, and 36 inches in diameter. The plate fell from the crane, breaking bones in the employee's right foot.",1
"An employee was on a ladder when it kicked out, injuring the employee.",1
"An employee got lightheaded and fell while walking, striking the ground and suffering minor brain bleeding.",1
"An employee was loading a hutch into a moving truck, pulling it up a ramp as a coworker pushed it from the other side. The hutch knocked the employee off balance; the employee fell, crushing two fingers between the hutch and the ramp. The employee suffered multiple finger fractures requiring surgery.",1
"An employee was pushing a gurney hamper, which turned and hit another hamper. The employee's little finger was broken.",1
"An arborist was trimming a tree when his chainsaw cut his life line. He fell about 28 feet to the ground below, suffering a broken back and ribs.",1
"An employee of The Phoenix Group was in a sample room at a steel plant, using a shear to cut down a steel specimen. The hold-down device contacted his ring finger, causing a partial amputation. The machine was guarded at the time.",0
"An employee tripped and fell to the linoleum floor, suffering a broken hip.",1
"On October 1, 2018, an employee was working on a line pasta forming machine. She was removing accumulated dough from the machine when a gear caught her cover coat sleeve. Her left hand was pulled into the gear, suffering an injury that required hospitalization and surgery.",1
"An employee was working on a retract cylinder that was locked up. The cylinder released and came down on the employee's right middle finger, amputating it above the first knuckle.",0
An employee was dressing a weld on a metal drum when his glove was caught between two rotating wheels on a rotating metal drum machine. The employee's left index fingertip suffered an injury leading to amputation.,0
"An employee climbed a ladder on the front of a trailer to try to lift part of the cover tarp out of the trailer. He fell into the trailer, suffering broken ribs. He was hospitalized.",1
"While walking down steps, an employee fell down two steps to the floor and suffered a broken femur. The employee was hospitalized.",1
An employee was trimming cable with a knife and amputated the tip of his left thumb.,0
"A scaffold carpenter was climbing a ladder to build a deck of scaffolding. He fell about 16 feet to the ground, breaking his right arm. He was hospitalized, requiring surgery.",1
"While planting sugar cane, a temporary employee began to feel dizzy and weak. He was hospitalized, suffering from possible heat exhaustion/dehydration.",1
"While cleaning inside a residential complex, an employee bent down, felt ill, and struck his head on a concrete floor, suffering a head injury.",1
"A temporary employee was walking with a 55-pound bag of seeds when he tripped and fell backwards. The bag landed on him, injuring his lower back.",1
"An employee was climbing a ladder with a bundle of shingles when another bundle of shingles was dropped from the roof onto him. He was knocked to the ground, landing on his head and suffering a head injury. He was hospitalized.",1
An employee drank from a bottle that contained a diluted cleaning chemical (degreaser). The employee became ill and was hospitalized for treatment.,1
"An employee was riding a three-wheel cart down a ramp. While it was stopping, the vehicle flipped and threw the employee to the concrete ramp. His arm and leg were injured.",1
"An employee was on a ladder, holding a bucket of hot asphalt. He lost his balance and fell to the ground; the asphalt splashed onto him, burning his face, arms and legs. He was hospitalized.",1
"On October 2, 2018, an employee was doing quality control checks on shotcrete application, using a welding rod as a probe to measure the thickness of the shotcrete. Shotcrete material separated from the face of the excavation and struck the employee on the head, neck, and face. The employee suffered fractures to the face, neck, and leg.",1
"An employee was running a trash compactor when one of the trash bags burst open, releasing a puff of drywall dust. The employee was hospitalized for tightness in her chest and difficulty breathing.",1
An employee was hanging a light when it began to fall and its wire wrapped around the employee's left ring finger. The finger was amputated.,0
"An employee was crossing the street to collect trash from a residence when he was struck by a car, suffering injuries to multiple body parts.",1
"An Aerotek contract employee was helping a press brake operator position a 4-foot by 2-foot metal sheet, weighing about 35 pounds, in a press brake. The contract employee's right index finger was pinched between the metal part and the press brake support, causing an amputation of the right index fingertip.",0
"An employee was adjusting a machine below a rotary airlock valve. The employee's left hand came into contact with the rotors, causing the amputation of two fingers. The machine was not locked out at the time of the incident.",0
An employee suffered ankle and face injuries when he struck a pole while operating an order picker lift.,1
"A door slammed on an employee's right little finger, amputating the tip at the first knuckle.",0
An employee was putting cheese into a hopper when his finger was pinched in the hopper's funnel cavity. He was hospitalized; the fingertip was amputated.,1
"An employee was carrying a 22-inch by 96-inch piece of particle board. The board he was carrying struck boards in a rack; two of them fell out and hit the employee's right big toe, causing a partial amputation.",1
"An employee was changing filters and greasing the shaft on an air handler unit. The employee's right ring finger was caught between the pulley and the belt, and the tip was amputated.",0
"While standing up, an employee struck his head on a machine motor mount, suffering head trauma with possible cranial bleeding. He was hospitalized.",1
"An employee fell off a dock as the dock plate was being lowered, striking his face on the ground.",1
"An employee fell while walking down stairs, suffering an ankle fracture/dislocation.",1
"An employee was helping install a stair stringer. It fell onto the employee's right lower leg, causing a fracture.",1
"An employee was loading a vibratory roller onto a trailer. The employee missed a step exiting the machine and fell onto the trailer, striking his back and head. He then fell from the trailer onto the ground. He suffered a head abrasion and fracture to the mid- to lower back.",1
"An employee was doing maintenance work on one of two cylinders of a front end loader. The loader's mast fell onto his left leg, pinning it to the floor and breaking it. He was hospitalized.",1
"An employee was moving a boar when it became agitated, striking the employee's thigh and causing a laceration about three inches long.",1
"An employee was holding a sheet metal brake on a dolly when it rolled away, fell, and hit the employee's leg. The employee suffered a broken femur.",1
An employee was handling material on a hand cart when the load shifted. A sheet of aluminum twisted and broke the employee's arm.,1
"An employee was driving a walkie rider down an aisle when it struck another, parked walkie rider. He broke his left ankle and suffered a head injury.",1
"While wiping down a table in an operating room, an employee slipped and fell to the wet floor. She suffered a broken ankle and was hospitalized.",1
"An employee was adjusting a pin press when it cycled, causing the amputation of the employee's right index fingertip. The press was not locked out at the time.",1
"An employee was checking a can filling line lid infeed. The lid feed actuator tripped and the feed mechanism started, amputating the tip/side of his right thumb. The guard had been removed at the time of the incident.",0
An employee was operating a pallet jack and struck a stack of pallets. The employee's foot was twisted.,1
An employee felt pain in the center of his chest after lifting a furniture dolly cover caught under a dolly wheel.,1
An employee was rotating an asphalt plant baghouse rotor when his right index fingertip was pinched between the rotor and the rotor brake. The fingertip was amputated.,0
"An employee was hammering 20-penny nails into a header when the second blow glanced off a nail, causing the nail to ricochet off the header and puncture the employee's cornea. Safety glasses were not being worn at the time.",1
"An employee was pulling a rocket cart when it caught her pants leg, causing her to fall to the ground. She suffered a broken femur.",1
An employee collapsed while loading and unloading mill works. He was hospitalized for a heart condition.,1
"At 11:00 a.m. on October 2, 2018, an employee was installing 15-inch PVC pipe in a storm sewer when his left hand was caught between the pipes. Three of his fingers were smashed; the index finger suffered a partial amputation.",0
"An employee was driving a stand-up tug when it accelerated as he was going around a corner. He jumped off, injuring his head and back on the floor.",1
"An employee tripped while walking, injuring her left knee.",1
"An employee was using a press brake to straighten out a piece of bent product. The employee suffered an amputation to the left thumb before the first knuckle, either from the press brake or the product being pressed.",0
"On October 3, 2018, an employee fractured her wrist in a fall down a flight of stairs.",1
An employee was using a utility knife to cut off the top of a 5-gallon plastic pail. The knife slipped and severely lacerated his left forearm. He was hospitalized.,1
"An employee was kneeling down, working on a dead panel box, when an arc flash and explosion occurred in the adjoining panel. The employee suffered burns to the face and arms and was hospitalized.",1
"An employee was working next to an engraving machine when it caught fire. While he tried to extinguish the fire with a portable extinguisher, he was overcome by the smoke.",1
"On October 3, 2018, an employee stepped down onto an extension ladder from a roof and lost his balance. He fell about 8 feet onto a front porch's wooden rail, then onto the ground. He suffered four broken ribs and scraped his arms.",1
"An employee was disconnecting an asphalt hose from a truck. Hot asphalt splashed onto the employee's arms, torso, and neck, causing third-degree burns. The employee was hospitalized.",1
An employee was working on a backhoe for a tractor when his right middle finger was pinched between the backhoe and the swing frame. The finger was amputated.,0
"While stepping out of a truck, an employee stumbled and fell to the ground. The truck's rear tire ran over the employee's right leg, causing a crushing injury that led to amputation below the knee.",1
"An employee fell through a hatch hole in a metal roof deck, landing on the ground below and suffering injuries to the back and right leg.",1
An employee was fitting a casting roll into a machine when his right index finger was pinched between the roll and the machine frame. He suffered an amputation to the fingertip.,0
"An employee was trying to remove a piece of lumber from a web saw. The saw blade kicked the lumber back, pulling the employee's middle finger toward the fixed guard and amputating the fingertip.",0
An employee was cutting flooring with a table saw when the blade amputated two of the employee's fingers.,0
"An employee had gone up a rig to unhook a block. The rig was clutched in, throwing the employee about 8 feet to the tuba line. His left knee struck a drum guard, which broke the kneecap. He was hospitalized.",1
"While pouring a powdered fiber supplement into cups, an employee inhaled the powder and had an asthma attack. The employee was hospitalized.",1
"At 6:11 a.m. on October 3, 2018, a temporary employee was using a cut and fold machine to crimp pieces of mylar (film strip). While the employee was straightening a piece of mylar, the machine activated and struck her left index finger. Her fingernail was amputated.",0
"An employee was unloading a concrete floor polisher from a vehicle using a lift gate. While trying to stop the polisher from slipping, the employee grabbed a bar that was a part of the machine's suspension system and it moved, pinching the employee's fingers and causing the amputation of the left index and middle fingertips above the first knuckle.",0
An employee's hand was pinched between a conveyor and a guide strip. The employee's left thumb was amputated.,0
"An employee was assaulted by three people while helping a customer. The employee was stabbed with a box cutter and suffered a concussion, and was hospitalized.",1
"An employee was struck by a forklift while walking through a warehouse. The employee suffered a fractured pelvis and hip bone, and was hospitalized.",1
"An employee was rotating a multi-sample tool on a tool cart. The tool came off the cart and his middle finger was caught between the cart and the tool, amputating the fingertip.",1
"On October 3, 2018, an employee was delivering paper to a customer when he fell off the back of a truck, landing on the ground and breaking his pelvis and legs.",1
"An employee was holding an H frame while temporary welds were cut. The frame twisted after a weld was cut, and its edge caught the employee's glove and pulled the employee from the ladder. The employee fell onto a work flat, suffering a broken femur.",1
An employee was spooling a cable on a door when the cable came off and the door fell. The lip on the door's back side lacerated the employee's lower left leg.,1
"An employee was using a chop saw to cut two-by-four plywood. The employee's fingers came into contact with the saw, causing an amputation to the left middle, ring, and little fingers.",1
"A roll-off container door was unlatched to be dumped. It struck an employee in the right foot, breaking it.",1
"An employee was using a beam saw to cut a sheet of plywood. The saw blade contacted his hand, resulting in an amputation of four fingers and part of his thumb.",1
"While working from a roof, an employee fell through a skylight to the concrete floor about 14' below, suffering a broken left leg.",1
"An employee was walking down an aisle when she fell straight forward, striking her face and head on the concrete floor. She suffered a concussion and facial swelling.",1
An employee fell from a rolling scaffold.,1
"An employee slipped on water, hitting the right side of her head on a countertop. She suffered a contusion on the right side of her head.",1
"An employee was leaving an oil platform when he lost his balance while stepping over a centrifugal pump. He slipped off the skid to the ground about 6 inches below, twisting his ankle and suffering a broken fibula. He was hospitalized.",1
An employee was walking on plywood to check an HVAC unit when he stepped off the board and fell through the ceiling. He suffered a fractured orbital socket and two fractured ribs on the lower left side.,1
"Between 9:00 and 10:00 a.m. on October 3, 2018, an employee was guiding the butt of a wooden electrical pole, which was being lifted by the winch of a digger derrick. The employee's neck came into contact with the pole as it was being grabbed by the pole claws; the top of the pole moved into (or close to) overhead high-voltage electrical lines. The employee suffered a 69,000-volt electrical shock down the body and out his foot.",1
"An employee was performing a compression test on a diesel engine. All of the injectors were removed since several of them were broken. A rag was held over an open cylinder to prevent debris and fuel from exiting. When the engine started, air pressure exited the cylinder and caused a puncture wound through the palm of the employee's left hand.",1
"An employee was removing belts from a belt-making machine when the machine activated, degloving the employee's left index finger.",1
"An employee turned into an aisle while driving a pallet jack. During the turn, his right leg was caught between the pallet jack and a yellow bollard, causing a compound fracture. He was hospitalized.",1
"An employee was descending a ladder, taking pictures of system suppression valves, when it tilted. He fell head first onto the carpeted concrete floor about 6 feet below, suffering fractures to the base of his skull, his right wrist, and his left middle fingers.",1
"An employee fell off a 6-foot ladder while cleaning, breaking his ankle when he struck the floor.",1
"Two employees were engaged in horseplay with an industrial staple gun when the gun fired, impaling an employee on the right side of the abdomen. The employee was hospitalized for surgery.",1
"An employee was removing old plywood sheets from a lean-to roof when he stepped into an opening between joists and fell onto a joist, breaking his ribs and puncturing a lung.",1
An employee was using a forklift to put away palletized product. The employee's left foot was caught between the forklift and a bollard; the employee suffered a crushed ankle and fractures to the foot and lower leg.,1
"An employee was sweeping the floor on the second level of a building. The employee fell through an opening in the floor, suffering forehead injuries that required stitches, bruised ribs, and a hip contusion.",1
An employee was removing sheet metal and studs from a ceiling soffit when a steel stud caused a deep cut to his arm. The employee was hospitalized.,1
An employee was cutting wood for a cabinet when the table saw lacerated the tip of his left index finger and thumb.,1
"A flywheel machine cycled while an employee's hand was inside it, breaking his finger. He was hospitalized.",1
"An employee was struck in the chest/abdomen area by a girder being moved by a crane. The employee suffered internal complications, among them injuries to the appendix and large intestine and cracked vertebrae.",1
An employee was walking through the parking lot when a 50 mph wind blew a piece of plexiglass at her and severed her right ear.,1
"An employee's left index finger contacted a moving part inside a pump, which cut off the tip of the finger.",0
"An employee was working from a combination ladder, drilling a hole in a ceiling. He fell off the ladder, breaking two ribs.",1
"An employee felt ill while on his waste collection route. He was hospitalized, suffering from dehydration.",1
"An employee connected a nail gun to an air compressor line. The nail gun shot a nail into the employee's left thigh, deep enough to reach the bone.",1
"An employee was on a garbage route when he lost consciousness, suffering from dehydration and muscle injury.",1
"An employee was attaching parts to a motor grader as part of its assembly. A part to be attached was on a mobile cart; the employee's right ring finger was caught between the cart and the grader, and was partially amputated at the third joint.",1
"An employee was bending metal sheets with a hydraulic press. As the employee adjusted the press, it crushed the employee's hand.",1
An employee suffered repository distress after smelling perfume and was hospitalized.,1
"An employee was cutting lettuce with a lettuce chopper when it caught the tip of his left thumb, amputating the skin from the tip of the thumb.",1
An employee was removing bagasse from a machine. A pry bar pinched off the employee's right little fingertip.,0
"An employee had adjusted the tension on a machine's chain/belt, then energized the machine to evaluate its operation. His hand slipped into the chain area; his finger was caught between the chain and sprocket, and he suffered partial amputations to the left ring and middle fingers. At the time of the incident, the machine's lockout/tagout had been removed and the chain area was unguarded.",0
An employee was standing on a two-step stool to place an electrical item onto a rack. He fell from the stool and broke his femur.,1
"An employee was cutting metal banding. After being cut, the banding shot up and struck the employee's eye causing a corneal injury.",1
"An employee was using an electric pallet jack to move stock. The jack pinned the employee's right foot against a wall, breaking it.",1
"At 4:45 p.m. on October 4, 2018, an employee was using a self-propelled fertilizer spreader to spread dry fertilizer on a customer's farm. He struck a washout in the field, and the spreader's air-ride seat bottomed out. He suffered a compression fracture of his lumbar spine and was hospitalized.",1
"An employee was helping others determine why a roll of fabric was not feeding correctly into a machine. A metal roller, under tension from fabric, bent and slipped out from the roller guide. It struck the employee, causing a compound fracture of the left tibia and fibula.",1
An employee was using a 20-ton air jack to lift the front end of a self-propelled telescoping boom. The machine shifted off the jack and pinched the employee's left middle finger between the machine frame and the jack. The employee's left middle finger was partially amputated.,0
"An employee was working on a panel box when his screwdriver touched a 480-volt panel. He suffered flash burns to the neck, face, chest, and right arm and a laceration to his forehead.",1
"Three employees were moving a motor onto the back of a golf cart. While two employees lowered the motor, the third began to push the motor in place. The motor flipped over, crushing the third employee's right ring finger and crushing and amputating his right middle finger.",1
"An employee was driving a stand-up forklift in an aisle and caught her right foot between the forklift and a merchandise display; she was hospitalized, requiring surgery for an injury to her big toe.",1
"An employee received a flu shot, had an allergic reaction, and was administered an EpiPen. The EpiPen caused an additional allergic reaction and the employee was hospitalized.",1
"An employee fell from the end platform of a railcar to the ground, 4.5 feet below. The employee was hospitalized with a broken ankle.",1
"An employee was changing the forks on a forklift. A fork slid down and crushed the employee's right index finger, causing an injury requiring stitches.",1
"An employee was feeding a new roll of stock material into a slip roller. The employee's left glove was caught between the material and the rolls of the slip roller; the employee's hand was pulled into the machine, suffering amputation of multiple fingers. The machine was guarded at the time of the incident.",1
"Two employees had rigged a 3,000-pound tank to a crane hook using straps. The straps slipped off the hook and the tank fell, hitting one of the employees. The employee suffered broken vertebrae and was hospitalized.",1
"A cart of cabinet doors tipped over while it was being moved, crushing an employee's foot.",1
"A forklift hit a skid, pushing it into a berm. An employee's foot was caught between the skid and the berm; the employee suffered broken toes and was hospitalized.",1
"An employee fell to the ground as she left an office, breaking her left arm.",1
An employee was climbing up to a machine platform when his left hand came into contact with a conveyor pulley system. Three of his fingers were amputated. The pulley system was unguarded at the time.,1
"An employee was handling steel beams while installing a rack. Two of the beams struck each other, crushing his left middle finger between them. The fingertip was amputated, including part of the nail bed.",0
"An employee was guiding a vault into a grave when the wire cable suspending it snapped. The cable struck the employee's right hand, causing injuries to three fingers that required surgery. The employee was hospitalized.",1
"An employee was using a derrick digger truck to lift wooden power poles. A pole lodged partially in the pile while being lifted. It shifted direction erratically after being dislodged and bounced toward the employee, striking his right leg and breaking the tibia and fibula.",1
An employee was using a nail gun to secure a board. A nail shot into the palm of the employee's left hand.,1
"An employee had been machining a part on a vertical lathe. The employee was discovered inside the housing of the machine, having suffered a broken neck, jaw, and ribs, a punctured lung and multiple lacerations. The employee was hospitalized.",1
An employee fell 15 feet through a roof opening while doing roofing work. The employee struck a CNC lathe machine during the fall to the floor and suffered a dislocated shoulder.,1
"An employee lost consciousness while sitting and fell, striking the wall and then landing on the floor. She suffered a head laceration.",1
"An employee was placing a citation onto the windshield of a parked vehicle, lost balance and fell to the ground causing fractures to both wrists.",1
"An employee tripped on a curb and fell to the ground, injuring his left shoulder. He was hospitalized and had his shoulder replaced.",1
"An employee was cooling off a radiator with a water hose. The radiator was uncapped, and the fluids inside it boiled off, burning the employee's torso; he fell to the ground and broke his right elbow. He was hospitalized.",1
"An employee fell from the top of an industrial truck, breaking eight ribs and a vertebra in his upper back and suffering a punctured lung. Fall protection was not being worn at the time.",1
"An employee was driving an ATV uphill. Having pulled over and parked to allow a tracked vehicle to travel down the right-of-way, the employee was trying to pull out and resume when the ATV tipped sideways and rolled about 400 feet downhill. The employee suffered a head laceration and a broken arm, as well as trouble breathing.",1
"An employee moved from a dock plate to the ground to remove a wheel chock. The plate was operated, causing a partial amputation to the employee's left thumb.",0
"An employee was helping lift a 10-foot ductile iron pipe section into a trench box. The pipe came loose from the clamp, bounced sideways, and struck the employee, causing tooth loss and soft tissue injury to an arm.",1
"An employee was deburring a piece of flat metal stock, 3"" x 3"", about 1/8"" thick. The stock lodged in the disc sander, catching and causing the amputation of the tip of the employee's right thumb.",0
"An employee was leaving a second-floor window of a home that was under construction. While hooking his lanyard to a safety rope, he slipped on a wet piece of paper and fell, landing on the ground about 15 feet below and breaking his pelvis on the left side. He was hospitalized.",1
"An employee was on a ladder, installing a toe line for a tubing lift. A weld on the structure broke, bringing it and the ladder down. The employee fell 15-20 feet to the ground, breaking ribs and a scapula.",1
An employee was connecting a portable GPU unit to an aircraft tug when his right ring finger was caught between the two connections. The fingertip was amputated.,1
"A felled tree kicked back and slid down a hill, striking an employee. The employee's pelvis was broken.",1
"While dragging a pallet to the edge of a trailer, an employee fell off the trailer to the ground, suffering thumb and back fractures and a head laceration.",1
"An employee was on a barge, cleaning and cutting out rebar from a concrete trophy. Suffering from dehydration, he became overheated and dizzy and fell. He landed on a steel beam, which struck the left side of his ribcage and caused a pneumothorax.",1
"An employee tripped over an empty wooden pallet on the floor while carrying another empty pallet. The employee fell, suffering a non-displaced fracture in the lower back.",1
An employee tripped and fell over backwards while moving wooden pallets. The employee broke a bone and was hospitalized.,1
An employee was trying to unclog a feed haul when the auger inside the feed haul pulled in his glove. His left middle finger was amputated.,0
"An employee was on a 12-foot A-frame ladder, working on a plumbing fixture in a home under construction. He fell off the ladder, striking his head on the concrete floor. He suffered a head laceration and broken ribs, and was hospitalized.",1
An employee slipped and fell while inside a refrigerated truck. The employee's head struck the floor. The employee was hospitalized.,1
"An employee was injured by a cow when moving a calf, suffering broken ribs.",1
"An employee was walking along a catwalk between a tractor and a trailer when he slipped and fell. His leg/hip area struck the side of the catwalk steps, and his pelvis was fractured. He was hospitalized.",1
"Two warehouse workers were moving six wooden bedroom doors set on a metal cart. One of the doors moved against the side of the cart, causing an amputation (without bone loss) to the tip of one worker's middle finger.",0
An employee was skimming a wash tank. The employee's index finger was caught in a rotating part and amputated.,0
"An employee was standing on a ladder in a stairway, holding ductwork that was being lifted into place. While attempting to secure the duct work, it slipped loose from its collar on the wall and struck the employee, knocking him off the ladder to the ground. He suffered fractured vertebrae in his neck.",1
"An employee's clothing was caught by an uncovered rotating shaft. The shaft mangled the employee's left leg, which was amputated from the knee down.",1
"On October 5, 2018, an employee was moving an electric pallet jack. His right foot was caught between the pallet jack and a pallet of water. He suffered a severe ankle/leg injury and was hospitalized.",1
"On October 5, 2018, while preparing food on a line, an employee slipped and fell to the floor. The employee suffered a hip fracture that required surgery.",1
An employee was using a shear to cut a piece of sheet metal. The employee's finger was pinched under the shear's hold-down; the tip was amputated.,0
"While making deliveries in a truck, an employee experienced heat exhaustion symptoms, becoming nauseated and vomiting.",1
And employee squatted to pull his 30-pound toolbox toward him when he felt a severe pain in his lower back. He was hospitalized.,1
"On October 5, 2018, an employee was lowering a press's ejector head/roller into position when it shifted, pinching the employee's right ring finger between itself and the ejector/roller stand. The finger was broken and punctured by a splinter.",1
An employee was clearing excess product away when his left hand came in contact with a high-pressure water jet. He suffered deep lacerations to the hand and fingers.,1
An employee's hand was lacerated by a thermal lance.  The employee was hospitalized.,1
"An employee was instructing an excavator operator to lift a piece of reinforced concrete pipe (weighing about 10,300 pounds, 6 feet long, and 60 inches in diameter) when it rolled off the excavator bucket and onto the employee, causing a fracture and a torn ligament in his pelvis.",1
An employee was descending a ladder when it slid. It and the employee fell about 4 feet to the ground; the employee suffered a broken elbow.,1
"An employee was using a dolly to remove bottles from a box truck when he slipped and fell on the dock plate, landing flat on his back and striking his tailbone.",1
An employee was hospitalized for a panic attack after hearing another employee was terminated due to restructuring at the company.,1
"An employee tripped over a case of water on the floor behind her. She fell to the floor, suffering a broken right femur.",1
"An employee fell while walking down a hallway, landing on the floor and breaking her right arm. She was hospitalized.",1
"An employee's forklift struck a pallet of product while backing up. His left index finger was caught between the pallet and a leg guard on the forklift, and was amputated.",0
"An employee was troubleshooting a new machine. A piece of metal fell from the machine and struck the employee's left middle finger, causing an amputation.",0
An employee was cleaning the house of the grain probe machine and their left hand was caught inside the opened area of the probe cylinder resulting in partial amputations to the middle and index fingers.,1
"Cardboard bales shifted in a trailer and fell out when the doors were opened. One struck an employee, injuring his pelvis.",1
"An employee was on a ladder, pulling a 2x4 from an overhead rack. The employee fell from the ladder to the ground, suffering five broken ribs and a punctured right lung.",1
An employee was working on a bridge site when he tripped on angle iron and fell onto rebar. He suffered an injury to the parotid gland on the right side of his face.,1
"An employee was operating a press brake when it crushed his left hand. The index, middle and ring fingers were amputated to the second knuckle.",0
An employee was handing a piece of ductwork to a coworker when it slipped from his hand and landed on the ground on top of his left wrist. He suffered a deep laceration to the wrist.,1
"An employee was checking the alignment and tightness of ventilation system drive belts. A belt snagged the employee's glove, pulling the employee's hand into the machinery. The employee suffered multiple fractures, including an open fracture/fingertip amputation.",1
"An employee was inspecting highway work when a passenger vehicle entered the work zone and struck his parked vehicle. The employee was pinned between his vehicle and a concrete barrier, suffering head trauma. He was hospitalized.",1
"An employee was climbing a rope ladder out of a pit. The employee fell from the ladder, landing on the cement floor about 10 feet below and breaking ribs and back vertebrae.",1
"An employee was changing a tire on a tire machine. The machine's arm came down and pinched his right middle finger, resulting in a partial amputation.",0
"While trying to stop a customer to check a receipt, an employee fell, struck her head, and lost consciousness. She was hospitalized.",1
"An employee was punching out a piece of metal channel material with an ironworking machine. His left little finger was caught between the channel material and the equipment, and the tip was amputated.",0
An employee was wiping down a roller with a rag when the rag and the employee's right hand were pulled into the rollers. The employee suffered a finger amputation.,0
"An employee was leaving an elevator when she slipped on a wet floor and fell. She hit her left knee, fracturing the kneecap, and was hospitalized.",1
"An employee was walking through a vestibule when he tripped over a stack of hand baskets on the floor. He fell to the tile floor, breaking his hip.",1
An employee was walking to a receiving dock when she tripped over a bed frame and fell to the ground. She suffered a hip fracture.,1
"An employee was unloading a 205-pound emergency generator from the back of a pickup truck. The generator slipped, coming down on his hands and amputating two fingertips.",1
"An employee was cutting a 4-by-6 board at a 45-degree angle. The saw blade contacted a knot in the wood, causing an amputation to the employee's left index finger.",1
An employee's fingers were caught between a mixer door and a scraper. The employee suffered a finger amputation and three broken fingers.,0
An employee was on a moving conveyor belt when he suffered bruises and a cut on his face. He was hospitalized.,1
An employee had been picking pickles at an agriculture site. The employee became unresponsive due to the heat and was hospitalized.,1
"At about 3:15-3:30 p.m. on October 7, 2018, an apprentice meat cutter at EGW was cutting lamb using a bandsaw. The saw blade hit a bone in the lamb, and the employee's hand was pulled into the blade. He suffered a laceration and fracture of his right index finger, and was hospitalized.",1
"An employee was installing a temporary bypass cable. While reaching down to pick up a wrench, he fell into the pedestal he was working on. His arm was broken, either in the fall or when he was pulled free of the pedestal.",1
"At about 7:40 a.m. on October 7, 2018, a temporary employee was operating the roll stand on a filament extrusion machine. She was stringing up the line when the machine pulled her in, breaking five bones in her left arm. She was hospitalized.",1
"On October 7, 2018, an employee was putting cardboard into a baler when the machine's guard was lowered onto his finger, pinching his left little finger against the frame. The end of the finger was amputated.",0
"On October 8, 2018, an employee tripped on an anti-fatigue safety mat, lost balance, and fell to the floor. The employee suffered a broken hip bone and was hospitalized.",1
"On October 8, 2018, an employee was helping a coworker clean a building's gutters. He got off a ladder onto the roof, then lost his footing and fell through a skylight. A cart broke his fall; then he landed on the ground, suffering a broken wrist and elbow and lacerations on his forehead.",1
An employee was preparing to remove plastic rolls from an extruder machine. The employee's right ring finger was crushed and amputated between two of the rolls.,0
"While checking the belt on a conveyor, an employee was caught in the machine's rotating rollers and belt. The employee suffered a broken left arm and right leg, and was hospitalized.",1
"An employee was operating a stand-up forklift when it struck a ballast, resulting in a fracture to the employee's left foot.",1
"An employee tripped and fell while moving equipment, suffering a back injury.",1
An employee was attempting to park a pallet jack when his toe was pinched and fractured between the pallet jack he was operating and a parked pallet jack.,1
"An employee was cleaning an awning with a vacuum on top of a ladder when the employee fell from the ladder to the ground, suffering broken ribs and a punctured lung.",1
"An employee was on a roof cleaning gutters . The employee slipped and fell to the ground, suffering a fractured elbow and lacerations to the face. The employee was hospitalized.",1
"An employee was on a roof when he tripped on a stone and fell, suffering a broken right femur, a contusion on the right side of his chest, and a cut on his right hand.",1
"An employee was using a tugger to pull a cable on a rope. The tugger began to shake out of control; while the employee was trying to stop it from shaking, his hand was pulled into the tugger. The tugger began to roll on the ground, bringing the employee with it until his right index finger was partially amputated.",0
An employee was performing a calibration to test sulfur content in butane. The valve was stuck so he used a wrench and butane sprayed out and ignited in the lab. The employee suffered second and third degree burns to his arms and face and was hospitalized.,1
"An employee was steering a three-wheeled sweeper that was being towed by a tow motor. The sweeper tilted while going through a curve, and a bar on it (which the employee was holding on to) hit the ground. The employee broke two bones in his left hand and severed his left pinky finger.",1
"A temporary employee bent over to pick something up off the ground when her hair was caught inside a machine grinder. She was pulled in, sustaining a hematoma.",1
"An employee was operating a drill press. The press caught his right glove, and the drill bit lacerated the top of his hand.",1
"An employee was shearing edges off titanium flashings when a piece was ejected from the shear, striking the employee's abdomen and lacerating it above the navel.",1
"An employee was hanging up a pump jack head. As the head was being lowered, it smashed the employee's hand against the pump jack. The employee suffered an amputation of the right forearm.",0
"A temporary employee was using a large bending machine to bend a 3/4-inch by 8-foot piece of metal. As he guided the piece through the rollers on the machine, his fingers were caught in the rollers and his left little finger was amputated.",0
"While getting out of his truck, an employee missed a step and fell onto the ground. He suffered broken ribs and a broken wrist and was hospitalized.",1
"On October 8, 2018, an employee was using a knife to cut a conveyor belt. The knife slipped off the straight edge and cut off the skin on the tip of the employee's thumb.",0
"On October 8, 2018, an employee stepped down the step ladder, lost his balance, and fell off the balcony 11-feet to the ground, breaking his leg. He was hospitalized.",1
"Employees were raising a 10-foot wood wall during framing operations. The wall slipped and fell on one of them, injuring his left elbow and shoulder. He was hospitalized.",1
An employee was installing trim on a home. The employee fell off the second rung of a ladder onto the sharp edge of trim debris causing a laceration including cut tendons and arteries.,1
"On October 8, 2008, an employee was struck on the left leg by an electric pallet jack. The employee suffered a broken left tibia and was hospitalized",1
An employee was trying to open a large mechanical door when his right hand was caught in the door. Part of his right little finger was amputated.,0
"An employee was conducting a bike patrol when he fell from his mountain bike. He landed on the ground, fracturing and dislocating his right femur.",1
A concrete truck driver was washing out the truck's concrete drum when the nozzle of the hose he was using made contact with a hopper. The pad of his right thumb was torn off.,0
"While installing conduit overhead, an employee fell through an opening in a steel platform to the concrete floor below. The employee suffered a head laceration, broken finger, and ruptured spleen.",1
"An employee was showing a coworker the adjustment needed on one of the blade heads on a planer machine. The blade head lacerated the employee's right thumb, index, ring, and little fingers and partially amputated the thumb and index finger. The employee was hospitalized. The blade head was unguarded at the time of the incident.",1
"A dual-drummed roller was lining up on a pad that was being paved, preparing to roll asphalt. The roller slid and its operator went over an embankment, suffering lacerations and multiple skull fractures.",1
"An employee's right foot was run over by a forklift, suffering an amputation of two toes on the right foot. The employee was hospitalized.",1
"An employee was walking around a portable ramp when a forklift, coming off the ramp, struck him and broke his ankle. He was hospitalized.",1
"An employee was walking down an embankment at a construction site. He slipped and fell to the ground below, breaking his tibia and fibula.",1
An employee was walking through a metal entry door and pinched their right thumb in the door resulting in amputation of skin and muscle from the thumb.,1
"An employee was working on a three-step stepladder, moving paint containers from the top of a shelf down to 
another location. As she descended the ladder, she missed the last step and fell to the floor, breaking her hip.",1
"An employee was using air skates to move an industrial drill, weighing about 20,000 pounds. The drill tipped over and crushed the employee's thumb against a wedge mounting block. The thumb was surgically amputated up to the first knuckle.",0
"An employee was bolting a steel beam (weighing approximately 720 pounds) to a structure when the steel plates shifted and pinned the employee's left hand. The employee sustained a broken left wrist, middle finger, and ring finger, as well as a severed thumb.",0
Two Automation employees got into a fist fight; one suffered a facial injury and was hospitalized.,1
An employee was working on a table saw. The blade lacerated two of the employee's fingers and amputated a finger.,1
"While climbing down a ladder, an employee lost footing and fell about 10 feet to the ground. The employee suffered fractured vertebrae.",1
"While doing outside maintenance, an employee tripped over a garden hose and suffered a head injury.",1
"Employees had attached a winch to lift a window rack when the winch gave way and hit the injured employee in the head, requiring hospitalization.",1
An employee was test-driving a go-cart he had been working on when it struck a parked car. He broke his left ankle and two ribs on the left side.,1
"An employee was a passenger inside a work truck that was driving down the road. She stepped out of the work truck to collect roadway signs. As she was walking around the vehicle, a pickup truck struck her, sending her to the ground. She suffered lacerations to the face, ears, and scalp and was hospitalized.",1
"An employee was operating a paint buffer when his headphones cord became tangled in the buffer, resulting in a left index fingertip amputation.",0
An employee was moving steel beams when his finger was pinched and lacerated between two of them. He was wearing cut-resistant gloves.,0
An employee was connecting a pipe to a new manhole inside an excavation when the soil caved in and pinned the employee against the manhole. The employee suffered fractured ribs and shoulder and wrist injuries.,1
"On October 9, 2018, an employee fell from the roof of a two-story home while cleaning gutters. The employee landed on the ground, suffering a fractured pelvis, ribs, and lower back, and was hospitalized.",1
"An employee was providing maintenance to a blower when the blower blade energized and the employee's right hand was sucked into the blade, partially amputating the index finger (from the nail up).",0
"A paramedic was riding in the back of an ambulance when it ran over a pothole or bump in the road, jarring his back. He suffered lower back pain and was hospitalized.",1
"While walking across a warehouse floor, an employee was struck by a powered pallet jack. The employee suffered a broken left tibia.",1
"An employee was standing on the top rung of a 6-foot ladder and using a drill to repair a vinyl crown when he reached to one side and fell off the ladder, landing on a house dolly that was adjacent to his work area. He suffered a dislocation and fracture of the left ankle.",1
"An employee was performing preventative maintenance on a motor assembly with a belt/pulley. He was inspecting the belt for tears when his right pinky finger was caught in a pinch point between the belt and wheel, resulting in a partial amputation of the right pinky finger.",0
An employee was attempting to drive a standup lift through a doorway while moving a storage rack when she missed the door opening and her left foot was crushed by the wall.,1
"An employee tripped and fell to the pavement while stepping from a curb in a parking lot, suffering a knee injury. The employee was hospitalized.",1
"An employee was driving a three-wheel cart up a ramp outside a building, at the second floor level. The cart flipped over during a turn and the employee fell to the ground. Striking asphalt, the employee suffered a mild concussion.",1
"On October 9, 2018, an employee was stung by a wasp while sitting in a guard shack. The employee suffered an allergic reaction and was hospitalized.",1
"An employee was operating an iron worker machine to cut a flat bar when the bar flipped up, catching the employee's left thumb between the bar and machine and resulting in an amputation to the thumb.",0
"Two employees were building a stage deck. The platform shifted, and both employees fell about 11 feet to the ground. One suffered a head injury.",1
"On October 9, 2018, an employee was helping to clear a jam on a paper winder when the winder cycled and the blade caught the employee's right index finger, resulting in a partial amputation.",0
"An employee was loading mineral tubs for cattle onto a truck when the employee's right index finger was caught and crushed under one of the tubs, requiring surgical amputation of the right index fingertip.",1
"An employee was exiting a room when she attempted to straighten a high chair, turned, and her foot became caught on the wall. She fell to the ground and fractured her femur.",1
"An employee was obtaining a sample from a sample port when 400 degree liquid sprayed the employee, causing burns to the face, hand, and chest.",1
The injured employee had dismounted his lift truck to pick up garbage. A second employee backed a forklift into the injured employee and pinned the employee against equipment causing an intestinal injury.,1
"An employee was carrying three pieces of 3/4"" PVC up a ladder. He fell from the ladder to the concrete slab roof, injuring two vertebrae in his lower back.",1
"A supervisor was on a utility cart, watching another employee cut brush using a tractor with a brush head. An object was ejected from the tractor, striking the supervisor in the head just below his hard hat and causing a fracture.",1
"An employee was going up the starch platform when the top handrail of the platform broke and he fell 8 feet to the ground, breaking his ribs and neck bones.",1
"On October 9, 2018, an employee was preparing to unload packages from a trailer when the employee tripped and fell into the wheel well of the trailer, suffering a broken lower leg. The employee was hospitalized and had surgery.",1
"An employee was clearing a lintel machine. The machine moved and trapped the tip of the employee's right middle finger, causing an amputation to the fingertip.",0
"An employee was attacked by a stray dog while walking up to a patient's home, suffering multiple deep lacerations to the right lower leg. The employee was hospitalized.",1
An employee was hit in the head by the side gate of his flatbed truck. He suffered head trauma.,1
"An employee was struck by an excavator while sweeping debris from the street into a trench, fracturing a leg and requiring hospitalization.",1
"An employee was standing by a baggage carousel as a second employee driving a baggage tractor made a U-turn. When the second employee completed the turn, the last dolly slipped and hit the first employee, who sustained a broken right tibia and fibula as well as crushed blood vessels.",1
"An employee was driving a baggage cart when it struck a belt loader. The employee suffered a broken left radius and ulna, damage to the left elbow and left shoulder, and an amputation of the left little finger at the first knuckle.",0
"An employee was moving muck that had been dredged from a waterway with a bulldozer. He drove over a ledge and the bulldozer went down quickly and came to a sudden stop. He was thrown forward and struck the front console and windshield, suffering neck and arm pain. A seatbelt was not worn at the time.",1
"At 3:00 p.m. on October 10, 2018, an employee fell while entering an elevator. The employee's forehead struck the rail, suffering an abrasion; the employee's humerus was broken when they landed on their shoulder on the elevator floor.",1
"On October 10, 2018, an employee was banding aluminum strips that were standing vertically in a gaylord container when the container split open. The aluminum strips then fell toward the employee and knocked him to the ground. He suffered head injuries and a broken hip.",1
"An employee was replacing a panel on a machine that weighed approximately 15 pounds. While lifting and adjusting the panel, the employee pulled a muscle in his lower back.",1
"An employee opened a rail car. A fireball blew out of the car into the employee's face, causing second-degree burns.",1
"An employee was preparing a cow for milking. A cattle gate closed on the employee's hand, causing a partial amputation to the left little finger.",0
"An employee fell in an asphalt parking lot, hitting his head. He suffered an eye socket fracture and lost consciousness. He was hospitalized.",1
"An employee was installing a satellite dish from a ladder. The employee slipped from the ladder, which lacerated the employee's bicep. The employee was hospitalized.",1
"An employee was stocking merchandise in a freezer and became short of breath, with numbness in the extremities. The employee was hospitalized, having suffered a possible heart attack.",1
"An employee was sanding the head of a stainless steel chisel when the employee's right thumb became caught between a vertical belt sander and the work rest, causing an abrasion that resulted in a partial amputation to the thumb tip.",0
"On October 10, 2018, at approximately 7:36 p.m., three employees were working inside an ammunition manufacturing facility on a primer manufacturing line. The injured employee was operating a primer cup shaking unit when the motor stopped working. The employee was troubleshooting the motor and reached through a sliding guard to try and push it to get it going. When the pulley motor started, the employee suffered an avulsion injury to their right index finger. The fingertip was surgically amputated.",0
"On October 10, 2018, an employee was resting his hand on the belt and pulley of a sawdust removal system while attaching a chain when his hand made contact with the pulley, resulting in the removal of a portion of his thumb.",1
"An employee was adjusting the photo eye at the back side of a conveyor. His right hand was resting over the cover of the drive chain and sprocket when his left hand activated the eye. He leaned forward and his right index finger was caught in the chain and sprocket, causing a laceration that resulted in a surgical amputation to the first knuckle.",0
An employee's ring caught on a part of a scissor lift while he was descending. The skin on his finger was torn off.,1
"An employee exiting the building slipped on some mud and fell to the ground, fracturing his tibia and requiring hospitalization.",1
"A roofing crew was starting a roof installation, carrying up large rolls of insulation to be laid out. A gust of wind blew a roll over while an employee was holding its end, and the employee was pushed over the edge of the roofline. The employee fell to the ground, suffering a forehead laceration and a broken elbow. Fall protection was being worn, but was not adjusted for the distance to the ground.",1
"On 10/10/2018, around 8:30 a.m., an employee was attempting to replace a motor on a press machine when the employee was pinned between the motor and the machine frame, suffering contusions that required hospitalization.",1
A patient came into the ER for treatment and smelled like smoke.  The smoke scent caused an employee to have an asthma attack.,1
An employee got into a fight with another person and suffered a broken tibia and fibula. He was hospitalized.,1
"An employee tripped and fell to the floor while carrying a box, suffering a laceration to the face/lip and knee.",1
"An employee was installing exterior plywood while standing on a second floor deck when he fell one story (about 12 feet) to the ground and broke his left arm, requiring hospitalization. A harness with a lanyard was worn at the time of the incident.",1
"Employees were attempting to jumpstart an SUV with a weak battery when the SUV moved forward and struck an employee. He suffered internal bleeding, skull and brain trauma, a crushed pelvic area, and other injuries.",1
"An employee was shot by someone in a vehicle in the parking area, requiring hospitalization.",1
"An employee was welding metal plates when a plate fell onto the employee's right index finger, resulting in a fingertip amputation.",0
"An employee was preparing to lift a vehicle on an auto lift. The vehicle moved forward, striking the employee and pushing them against a tool box. The employee's legs were broken, and the employee was hospitalized.",1
"An employee was using a screwdriver to remove a stick jammed in a descrambler chain. The screwdriver kicked out and the employee's thumb entered the chain area, causing a laceration and amputation injury to the thumb tip.",0
"An employee fell from a ladder to the concrete floor, suffering a head injury, fractured ribs, and a fractured collarbone. The employee was hospitalized.",1
"An employee was running a cup filling machine when she came into contact with the lidder mechanism and her right hand became stuck underneath it, resulting in an amputation to the pinky finger.",0
"An employee was attempting to start a lawn mower. When he pulled the cord, the mower lifted and landed on his left foot, resulting in a  partial amputation of his big toe. He was hospitalized and required surgery.",1
An employee was pull starting a snow blower and tore a knee ligament.,1
"Employees tilted an oven and its stand so that the floor behind it could be cleaned. As the oven and stand were put back on the floor, the stand's adjustable leg caught an employee's right middle finger. The fingertip was amputated at the nail.",1
"An employee was clearing a jam from an automatic box folding machine when the machine cycled, resulting in an amputation of the employee's thumb tip.",0
"Employees were cleaning a mixing machine. The injured employee was attempting to remove meat when the other employee rotated the mixer blades, resulting in an amputation of the injured employee's right hand above the wrist. The injured employee was hospitalized.",1
"An employee was on an extension ladder, about to power-wash a section of roof, when he slipped and fell 10 feet to the ground. His left leg was broken below the knee and his right toe was also fractured.",1
"On October 11, 2018, an employee was using a handheld, gasoline-powered cutoff saw to cut aluminum material for recycling. The saw kicked back and struck the employee's face, causing laceration and fracture injuries. The employee was hospitalized. The hard hat's face shield was not in place at the time of the incident.",1
"An employee lost his footing while moving concrete panels. A panel shifted, knocking him backwards to the ground. He suffered two broken ribs and an injured shoulder.",1
"An employee was using a bending machine to roll a piece of stainless steel when the employee's glove was caught in the dual roller, crushing the employee's hand and causing an amputation. The machine was unguarded at the time of the incident.",0
"An employee was climbing up a ladder secured to a one-story home. Once the ladder was untied, it slipped and the employee fell. The employee suffered a broken left arm and swelling on the left side of the face.",1
"On 10/11/2018 at 6:00, an employee was receiving an airplane when she tripped over a chock, falling to the pavement and breaking her left wrist.",1
"An employee was adjusting a machine. The machine malfunctioned and its clamping mechanism closed on the employee's hand, causing a partial amputation of two fingers.",0
"On 10/11/2018, an employee was observing and recording information about a conveyor drive motor while standing on a step ladder. The conveyor line was located approximately 9 feet above the floor. The sleeve of his smock became caught in the line, causing him to lose his balance and fall from the ladder. He was hospitalized with a laceration and fracture to the left arm.",1
"An employee was spreading MEK solvent on the floor with a broom when a pilot light ignited, causing a fire. The employee suffered first-through third-degree burns on the chest, hands, and arms.",1
An employee was walking in a dock area. A forklift ran over the employee's left foot while backing up.,1
"An employee was cutting material with a saw when it cut his finger, resulting in an amputation.",0
"An employee was moving a piece of furniture. As he was setting down the piece, his middle finger was smashed beneath the furniture, resulting in a partial surgical amputation.",1
"An employee was working on a PNC forming machine when the employee made contact with the grinding wheel on the machine, resulting in amputations to the right index fingertip and thumb tip. The machine was not locked out at the time of the incident.",0
"An employee tried to clean a gang rip saw and its blade injured the employee's right thumb, causing an amputation.",0
An employee tripped while walking down the stairs of an amphitheater and fell onto a table. The worker suffered a lacerated liver and a breathing problem.,1
"While trying to lower and move a loaded pallet jack, an employee slipped and fell to the floor, suffering a broken femur. The employee was hospitalized.",1
"An employee was washing out a pole when an electrical contractor dropped a primary/high voltage line onto the employee's left shoulder area, resulting in an electrocution.",1
An employee was using a disc grinder to grind off the legs of a bracket. The grinder kicked back and lacerated the employee's left leg above the knee.,1
"An employee was washing his hands when he reached up to grab a piece of ceramic steel. At that time, he bumped a knife pouch, resulting in the knife coming out and poking/lacerating him on the right hand above the wrist.",1
"An employee was in a client's home carrying a flower pot down stairs when the employee tripped and fell, fracturing the left leg and requiring hospitalization.",1
"An employee was operating a band saw when his right ring finger contacted the blade, resulting in a fingertip amputation.",0
"An employee was struck by a falling piece of plywood while cleaning a work surface, resulting in a partial amputation of the left middle finger.",0
"An employee was working with a wood production scanner when a board jammed in the machine. When the jam was cleared, the board moved and the employee's hand was drawn into the machine. The employee suffered an avulsion to her right index finger and a broken right thumb.",1
"An employee was walking down stairs and fell, fracturing a leg.",1
An employee was walking on the bridge deck when he fell approximately 16 feet and landed on concrete panels. He suffered left-side rib fractures and fractures to the lower lumbar vertebrae.,1
"An employee was positioning a piece of angle iron on a concrete pad when the angle iron fell off the concrete pad and struck his right leg, breaking it.",1
"An employee was operating a stand-up counterbalanced forklift and was attempting to push a stack of empty pallets using the rear, passenger compartment side of the forklift. As the pallets were being pushed, they became lodged between a rack and the forklift, causing the wooden pallets to break. Pieces of a broken pallet entered the passenger compartment of the forklift and struck the employee in the left leg, fracturing his tibia and fibula.",1
"An employee was descending a scaffold ladder when the employee missed a rung and fell approximately 10 feet to the ground, breaking a leg.",1
"An employee was shocked while doing electrical work and fell from a ladder. The employee suffered fractures to the shoulder, tailbone, and ribs on the left side.",1
"An employee was operating a transfer pump on a drilling rig. The employee removed the dog ear on the cam lock fitting on the suction side hose to unpack the pump. Water base was released from the pump fitting onto his right forearm, causing third-degree burns. The employee was hospitalized.",1
"An employee fell through an open false-floor panel in a mausoleum, landing on a granite and concrete floor 10-12 feet below. He suffered a head concussion/laceration, cracked vertebrae, and strained ligaments in his right knee.",1
"An employee was removing a drive pin from a transmission on a conveyor belt system. The pallet the transmission was on smashed her left index finger, causing an amputation.",0
"An employee was loading a piece of equipment into a trailer. A piece of freight struck the employee's head, causing a laceration and a cut on the ear.",1
An employee was pushing a bagel rack into a walk-in cooler. The employee's shin was cut by the rack and became infected.,1
"A concrete structure became stuck inside a concrete form, and a maintenance employee was called in to remove the tilt doors to enable the concrete structure to be removed from the form. The employee was removing a pin from the form tilt door when the door fell and landed on his leg, dislocating his right knee.",1
"After practicing shooting at a firing range, a public safety officer started to dismantle the gun. A round was still chambered and the weapon discharged, shooting the employee's leg. The employee was hospitalized.",1
"An employee was at a client's home when she tripped over his cane and broke her arm. She was hospitalized, requiring surgery.",1
"An employee was installing gutters on the ridge of a residential building. The employee fell off the roof, suffering a broken pelvis. No fall protection system was in place at the time of the incident.",1
"An employee was on an 8-foot step ladder repairing a glass panel over the boards in a hockey rink when he fell from the ladder to the skating rink ice. He lost consciousness and suffered a concussion, requiring hospitalization.",1
An employee was triaging machines when a forklift ran over and fractured the employee's right foot.,1
An employee was scouting deer in a deer blind and began having chest pains. The employee was hospitalized for a heart attack.,1
An employee was attempting to unjam a pill from a pre-forming machine when the machine amputated the employee's left thumb and index finger.,0
"An employee was pulling a patient in a wheelchair through a door when the patient resisted by holding onto the door frame. The patient became combative and in the struggle, the employee fell down and hit her head on the floor, suffering a concussion.",1
"An employee was hanging plywood to the exterior of an apartment building. The employee was straddling a guardrail and was leaning past it when it swung outwards and the employee fell approximately 11 feet out of a wall opening onto a concrete patio. The employee was wearing a harness and a lifeline, but it failed to arrest his fall. Both of the employee's knees were fractured and his chin and right hand were lacerated.",1
"An employee was struck by a steel beam, suffering a fracture to the left ankle/foot that required hospitalization.",1
"An employee was inserting the final bolt to install a 1,000-pound electrical substation switch on a metal frame. The switch was supported by a magnetic lifting device, which released the switch; it dropped about 2 inches and pinched the employee's left hand against the metal frame. The employee suffered injuries requiring surgery: two broken bones in the hand and lacerations to the index finger and thumb.",1
"An employee was using an aerial lift to change lights in the garden center and fell from the lift sustaining a broken shoulder, pelvis, and leg as well as facial fractures.",1
"An employee was transferring a steel mold plate from one work bench to another using an overhead hoist when the mold plate already on the work table began to fall/tip over. As he tried to catch the plate, it crushed his right hand.",1
"An employee was offloading hydrochloric acid (15% concentration) when the employee was sprayed in the face, suffering acid burns to the face and eyes.",1
"An employee was welding a metal container when a spark ignited a cylinder of hydraulic fluid, causing a flash fire. The employee suffered burns to his face and the left side of his body.",1
"On 10/12/18, an employee was moving a large loom that was mounted to a table on iron caster wheels when one of the caster wheels broke, causing the loom to tip forward and strike the employee's chest. The employee was hospitalized.",1
"An employee was painting on top of a scissor lift platform that was extended 19 feet when the lift went over a ramp incline and became unstable, tipping over. The employee impacted the ground, suffering broken ribs and fractured vertebrae.",1
"An employee was driving a stand-up forklift down an aisle. While he was trying to stop, his left foot and toes were crushed between his forklift and another, parked one. He was hospitalized.",1
"An employee was checking an HVAC control reading at a unit when he tripped over gas line piping and braced himself for the fall, fracturing both wrists.",1
"An employee was climbing on a 10- to 15-foot roof to inspect it for claim damages when he slipped and fell to the ground, suffering bone fractures.",1
An employee was unjamming a machine and suffered a partial amputation of the right index finger and thumb. The machine was guarded at the time.,0
"On October 13, 2018, an employee was cleaning a wall when the employee's right little finger struck a sharp corner, suffering a laceration that required hospitalization.",1
An employee was struck by a vehicle and was hospitalized.,1
"A crew was coming out of a rig hole with tubing when the air backup on the tubing tongs slipped and bumped the injured employee, knocking him over a hand rail of the rig floor. He fell 6 to 7 feet head first, lacerating his forehead and breaking his left eye socket. He was hospitalized.",1
"An employee was removing roller pins from a tray with a hammer when an automated piece of manufacturing line equipment was activated by a sensor and caught the employee's lower left leg between steel components. The equipment continued to press down, causing a compound fracture of the lower left leg above the ankle but below the midpoint of the shin.",1
"An employee was repairing a car's air conditioning unit and checking the tension on the serpentine belt when his hand got caught in the moving belt, causing lacerations and bruises to his right hand and index finger. He was hospitalized and had surgery. The car was running at the time of the incident.",1
An employee and a coworker were moving an aluminum extrusion weighing approximately 43 pounds when the coworker dropped his end. The employee's right middle finger was inside the extrusion at the time and suffered an avulsion that required surgical amputation.,0
"An employee was walking on an uneven surface when she slipped and fell on wet grass, breaking her right foot and ankle in three places. She was hospitalized and had surgery.",1
"An employee was helping to correct the tiedown straps on a palletized load on a flatbed trailer with multiple fixed ladders when the third fixed ladder slammed down onto both his right and left hands. His left index finger was amputated at the first knuckle, an his right index and middle fingers were lacerated.",0
"An employee was sitting at the reception area when a resident asked for help. She stood up and her right foot became tangled with her left foot, causing her to fall to the floor and fracture her left hip.",1
"An employee was walking alongside a hayride cart when she was run over by the cart's wheel, suffering a broken femur.",1
An employee suffered from smoke inhalation while troubleshooting an electrical fire.,1
"While installing a new roof on a facility under construction, an employee fell to the lower level and suffered a broken right arm.",1
An employee was descending the mobile staircase after removing an oil heater from storage. She missed a step and fell to the ground resulting in a broken hip and femur.,1
"An employee was carrying branches and brush to a chipper machine when the employee was struck by a dead tree that fell over, suffering spinal fractures and a concussion. The employee was hospitalized.",1
"An employee was trying to cut yarn from a shaft twister machine when his glove was caught on the rotating shaft, resulting in a left thumb amputation to the first joint. The machine was unguarded and not locked/tagged out at the time of the incident.",1
"An employee was walking down a driveway to deliver mail when the employee slipped in a puddle and fell, breaking the left leg.",1
"An employee was patrolling on a horse when the horse stumbled and fell. The employee fell with the horse, striking his face, shoulder, and arm on the ground. He was hospitalized with facial fractures.",1
"A bucket in a drag conveyor came loose and fell to the bottom of the drag conveyor. A temporary employee was attempting to retrieve the bucket when the drag conveyor energized, pulling the temporary employee's left arm into the conveyor and amputating it at the elbow.",1
Two employees were engaged in arm wrestling when one of the employees sustained a compound fracture of the right arm requiring hospitalization.,1
"An employee was operating an iron roughneck while moving drill pipes when a pipe struck his fingers against the iron roughneck's control box, resulting in a partial amputation of the left ring fingertip. The employee's hand was outside the equipment at the time of the incident.",0
"On 10/14/2018, an employee was securing a container to be loaded with a crane. When the crane lifted the load, he was hit by the bottom container and fell 10 feet, suffering a facial fracture, broken arm, internal bleeding, and a fractured spine. Some of the connectors were not connected correctly at the time of the incident.",1
An employee's foot was run over by a forklift.,1
"An employee was leading a horse from the field to the barn when the horse got away from him. He left the horse in the field to calm down. While he was closing the metal gate (8 feet wide and 4.5 feet high), the horse ran towards the gate and pulled it off its hinges. The gate fell on top of him and the horse ran on top of the gate and the employee. He suffered a brain injury and lost consciousness, requiring hospitalization.",1
"An employee was in the store parking lot helping a customer load a trailer when the trailer hitch broke and rolled back, striking his left leg. He was hospitalized with a broken left leg.",1
"Two journeymen were tasked with operating the capstan and guiding the spider rope on the drum. The injured employee was operating the capstan controls and the second lineman was guiding the spider rope onto the drum utilizing a fiberglass rod. While pulling in the spider rope, it became taught when a roller failed causing the fiberglass rod to come out of the second lineman's hands and strike the capstan operator in the right hip. The injured employee suffered a right leg laceration and a fractured iliac bone requiring surgery and hospitalization.",1
"An employee was run over by a forklift that he was directing, suffering a left leg injury.",1
"An employee was working in an excavation to install a new water line. The employee was cutting an existing steel pipe with a cut-off saw when the pipe broke and caused the saw to kick back. The saw blade contacted and lacerated the employee's neck, requiring hospitalization and surgery.",1
"An employee was guiding a stay rod onto the body of an isolation tool when his left thumb was crushed between the tool and the stay rod, resulting in an amputation to his thumb.",1
"An employee's left thumb was caught between a lift truck mast and the side of the truck, resulting in a partial left thumb tip amputation.",0
"An employee was installing duct work from a 10-foot A-frame ladder when wind blew plywood over, knocking the employee off the ladder. The employee sustained a fracture injury.",1
"An employee was on the fourth step of a 10-foot ladder installing wood blocking over an exterior doorway when he lost his footing and fell to the ground, hitting it face first. He suffered a broken nose and back injury.",1
"An employee was getting ready to bypass a transformer to install a new line pole when the employee clipped the bypass lead onto the center power line and created a short circuit. An arc flash occurred, causing burns to the employee's face and neck.",1
An employee was cutting plywood with a handheld circular saw when it kicked back and lacerated his upper left thigh.,1
An employee was loading a crane onto a transport vehicle (low boy). The employee jumped down from the exit area of the crane and rolled his right ankle fracturing it.,1
"After completing roofing work, an employee experienced headaches, cramps, and vomiting, requiring hospitalization for kidney failure.",1
"An employee was attempting to retrieve a piece of strap lumber from the edger un-scrambler machine when his left gloved hand came into contact with the end rolls' drive chain and sprocket. As a result, he sustained an amputation of the left ring finger, partial amputation of the left pinky finger, and laceration of the left middle finger.",0
"On October 15, 2018, at approximately 6:30 PM, an employee was loading a product roll when the roll fell and clipped the employee. The employee suffered a deep laceration on the left thigh, requiring stitches and hospitalization.",1
"An employee was operating a horizontal broaching machine to cut two metal parts when his index finger was caught between the two parts, resulting in an amputation between the first and second knuckle.",1
"On October 15, 2018, at approximately 7:25 a.m., an employee was walking into a freezer when the employee slipped on some cardboard and fell to the floor, breaking the right arm. The employee was hospitalized and had surgery.",1
An employee was manually stuffing a tote liner inside the torn opening of a sack full of peanuts that was positioned on a pallet on the ground when another sack stacked on top of the sack the employee was stuffing fell on and pinned him against the ground. He sustained a right ankle fracture and lumbar (L5) vertebrae fracture.,1
"An employee reached into a truck with his foot to press the clutch down and start the truck. When he took his foot off the clutch, the vehicle started to move in reverse and he fell to the ground. The truck then ran over the employee, causing a pelvic fracture.",1
An employee was draining a cylinder supported by an overhead crane when the middle tube of the cylinder slid down and trapped her fingers. She was hospitalized with possible amputations to two fingers on her right hand.,1
"An employee was loading H braces onto a truck when one of the H braces fell from the upright position and struck his right leg, causing a fibula fracture. He was hospitalized.",1
An employee was hospitalized for dehydration after not feeling well at the end of his shift.,1
"An employee was standing on a machine table 25 inches off the floor tightening bolts. The employee attempted to step down from the machine table and fell to the floor, suffering a broken hip and requiring hospitalization.",1
"An employee was adjusting a chain on a forklift when his finger was caught between the mast guard and the vise grip hand tool, resulting in a left ring fingertip amputation.",0
"An employee was walking from his workstation when he tripped on a sling and fell to the ground. He tried to break his fall and broke his right wrist, requiring hospitalization.",1
"On October 15, 2018, an employee was welding a rack when the employee's clothing caught fire. The employee was hospitalized with burns to the chest, three right-hand fingers, and left arm.",1
An employee was bitten by a black widow spider requiring hospitalization.,1
"An employee suffered a hernia while removing a 19-pound strut from a rack, requiring hospitalization and surgery.",1
"An employee and a foreman were removing a steel walkway door when the door closed on the employee's finger, smashing it and causing a soft tissue amputation under the fingernail (fingernail still attached).",0
"An employee was mowing the lawn when the mower caught a silt fence, pulling the stakes out of the ground. A wooden stake then struck his face, causing a burn.",1
"An employee was making beds in a room at a senior living facility when she tripped over the corner of a bed, causing her to fall to the floor. She suffered a dislocated and fractured right shoulder.",1
"Four Turner employees were working to remove discharge piping to make modifications. While removing the piping from pumps, the crew placed the pipe (approximately 300 lbs.) onto a cart. It rolled unexpectedly and pinched an employee's left ring finger between it and the cart rail, resulting in a fingertip amputation.",1
An employee's finger was amputated while removing a stuck piece of lumber from a chipper machine.,0
"An employee was activating a barring system to lock in the position on a hyper compressor and conduct preventative maintenance when the employee's right ring finger was crushed between the barring system and the fly wheel, resulting in an amputation to the finger.",1
"An employee was working on the roof bringing down materials to the ground floor. Afterwards, he went to the tent area to take a break and was abnormally fatigued, requiring hospitalization for dehydration and a muscle injury.",1
An employee was preparing a die to be lifted with a forklift while a second employee was positioning the forklift to pick up the die. The second employee crushed the first employee between a rack and the forklift while moving it into position. The first employee suffered multiple rib fractures on both sides.,1
An employee was walking on a level hallway surface inside an office building when she collided with another employee and fell to the floor on her hip area. She fractured her hip and was hospitalized.,1
"A temporary employee was bailing scrap wire. The bailer operates by pulling the wire into the machine and winding the wire. The bailer was operating in automatic mode while the temporary employee used their right foot to guide the wire into the bailing machine. The employee's shoe lace was then snagged by the wire, pulling the temporary employee into the bailing machine. The employee suffered fractures to the right leg below the knee.",1
"An employee was loading canopy deck pans onto a truck and placing cardboard spacers between the canopies to protect the surface. In order to place the spacers, he was standing on the canopy deck pans. His right foot became caught on the edge of a deck pan, causing him to lose his balance. He then fell approximately 10 feet onto the gravel parking/loading area, fracturing his left arm, breaking several ribs, and bruising his left hip.",1
"An employee was getting up from a chair at a lunch room table when he tripped on the chair, lost his balance, and fell, fracturing his right hip.",1
"On October 16, 2018, at 1:15 PM, an employee was building a small roof attached to another building and was setting rafters when one of the rafters started to fall. The employee attempted to grab the rafter and fell head-first about 9 feet, 6 inches, to the concrete below. The employee was hospitalized with a cut on the head, bruises on the chest, and fractured vertebrae.",1
"An employee was performing a test on a diesel fuel tank that is 10 feet high. He used an extension ladder to reach the top of the tank. While descending the ladder, he fell 9 feet to the ground and struck his head, suffering a concussion and skull fracture. The ladder was not tied off at the time of the incident.",1
"An employee was on a ladder checking security cameras at the front of a building when the employee fell to the ground, suffering broken ribs, a punctured lung, and a concussion. The employee was hospitalized.",1
"An employee was transporting a large roll of plastic via hand cart. The hand cart had a vertical pole that struck an overhead piece of equipment, causing the employee's right hand to become caught between the pole and the cart frame. When the employee attempted to removed the hand, the ring and middle fingers were de-gloved. The fingers were later medically amputated.",0
"An employee was descending a wooden electrical pole line with his climbing belt, pull strap, climbing boots, and spikes. He unbelted in order to climb below the telephone lines. While he was putting his climbing belt back on with the pull strap, his spikes lost contact with the wooden pole, causing him to fall 20 feet to the ground and fracture both hips. He was hospitalized.",1
An employee was lowering a plow attached to a forklift with a steel cable. The cable failed and the employee's left pinky finger was crushed between the plow and a fork. The finger was amputated below the fingernail at the first joint.,1
"An employee was exiting the bucket of an aerial lift truck when his foot missed the step, causing him to lose his grip and fall about 8 feet to the ground. He struck his head on the rear outrigger of the truck, suffering a broken C1 vertebra, torn vertebra ligaments, a skull fracture, and two broken ribs. He was hospitalized.",1
"An employee was cleaning his work area when his finger was smashed in a pneumatic vice press, causing a laceration on his right index finger.",1
"An employee's right hand was caught between two magnets during a cleaning operation, causing tendon damage.",1
An employee tripped over the lower chain at the loading dock and fell resulting in a contusion and laceration on the head.,1
"An employee was pouring cement into a foundation form when he was struck by the cement pump truck dispensing arm, causing him to fall approximately 7 feet to the lower working surface. He suffered facial, neck, and head injuries.",1
"An employee was operating a standup forklift and was pinned between the steering wheel and rack while going around a corner, suffering three cracked ribs, a punctured lung, and a ruptured spleen.",1
"An employee tripped and fell into a wall, fracturing her left arm.",1
"On October 16, 2018, at 3:45 PM, a temporary employee reached through the mast to scan a pallet that was on the forks of a powered industrial truck. While the employee was leaning forward to scan the pallet, the lift mast was engaged, crushing the employee's hand between the mast and fixed point of the lift and breaking bones.",1
"An employee was cleaning a kettle pump when his hand entered the pump inlet, resulting in the amputation of two fingers.",0
"An employee was cleaning a meat grinder machine when his right index finger slipped into the faceplate hole and was struck by the screw drive mixing blade, resulting in an amputation of the first finger digit.",0
"On October 16, 2018, an employee was using a ladder to retrieve a box of crab legs from the freezer area when the employee lost balance and fell from the ladder, suffering a broken right wrist that required hospitalization.",1
"An employee fell off the side of a vacuum truck while putting his belongings in the cab. He struck another truck before hitting the ground, suffering fractured lumbar vertebrae.",1
"An employee was crushed between two sections of corrugated pipes being pushed by a loader, suffering a cracked pelvis, bruised spleen, and broken tailbone.",1
"An employee was handling a racking board section. When the employee knocked a pin out of the racking board section, the racking board fell and hit the employee's left leg. The employee suffered a dislocated hip and fractured pelvis, requiring hospitalization. The racking board was not properly tied off at the time of the incident.",1
"An employee was operating a machine when the hydraulic clamp initiated, causing an injury to the employee's left ring finger that resulted in a fingertip amputation.",0
An employee received an electric shock and arc flash burns to the hands and neck while pulling cable.,1
"An employee was moving a ketchup box that weighed 42 pounds when he suffered a musculoskeletal injury in his back, requiring hospitalization.",1
"An employee was unloading a truck when an unoccupied forklift rolled into him, striking him in the back. He suffered injuries to the back and pelvis and was hospitalized.",1
"An employee was helping a vendor unload material from a truck when the material shifted and fell on the employee, causing a right tibia fracture.",1
"On October 16, 2018, an employee was walking through the parking lot when she jumped over a 54-inch-wide drainage ditch and slipped on landing, breaking two bones in her lower leg. She was hospitalized.",1
"An employee was administering a breathing session when the employee tripped over oxygen tubing and hit the floor, fracturing the area right below the right hip (trochanter).",1
"An employee was climbing metal, diamond plated stairs when his foot slipped and he fell into the railing causing a hematoma to the left waist area.",1
"An employee was trying to re-light the pilot light on a combustor. It failed to ignite, then ignited when the door to the box was opened. A flash fire burned the employee's hands and face.",1
An employee was cutting a piece of angle iron with a horizontal fixed-stand band saw when the employee's left index finger entered the point of operation. The blade then amputated the employee's left index fingertip just below the cuticle.,1
"An employee was on break in his vehicle and had taken his handgun out of his glove box and placed it onto his left thigh/leg. When he was putting the gun back in the glove box, it fired. He was hit in his left thigh, and the bullet exited through his left knee. He was hospitalized.",1
"An employee was cutting a steel bar when a hopper gate fell on the employee's head, causing fractures.",1
"An employee was on site cutting down a line of trees with a chainsaw when a branch struck his head, causing head trauma. Personal protective equipment was worn at the time.",1
"An employee was conducting an inspection in a single family home's attic when he fell approximately 12 feet to the ground below, fracturing one of his middle vertebrae.",1
"A temporary employee tripped over the forks of a forklift and fell backwards, hitting her head on the concrete and requiring hospitalization.",1
An employee was binding cardboard totes near the beehive equipment. He fell and contacted moving parts within the equipment sustaining a left index finger amputation.,0
"An employee had just pried up a sewer cover using a pick when it fell onto his right hand, resulting in amputation of his index fingertip.",0
"An employee was stung by a wasp or bee while emptying garbage into a dumpster, suffering swelling on the back of the neck.",1
An employee was cutting meat on a band saw when the saw blade cut off the employee's right middle fingertip (no bone loss).,0
"On October 17, 2018, at approximately 1:40 PM, an employee was straddling a truss approximately 16 feet above the ground and cutting the top off the post with a chainsaw. As he made the cut, the chainsaw cut into his right leg above the knee, requiring hospitalization.",1
A forklift operator was unloading building materials when the forklift got off balance and the operator struck his head on the forklift cage. The employee was hospitalized and received stitches on his head. The operator was not wearing a seat belt at the time.,1
"An employee was conducting maintenance activities on solids control equipment when his right hand was caught in the equipment's grinder, resulting in the amputation of his right-hand fingers.",1
An employee was working on duct work when a piece of duct dislodged and struck the employee's arm.,1
"An employee was putting a piece of decking on the 8-foot roof of a new construction residential home when he fell off the roof and hit the dirt below. He suffered a broken wrist and fracture below his eye, requiring hospitalization and surgery.",1
"An employee was operating a paper bag machine when his right middle finger was caught between the machine's frame and pusher arm, resulting in a fingertip amputation. The machine was guarded at the time of the incident.",1
"An employee was doing formwork when he moved and struck a horizontal rebar near his right eye. He suffered a laceration to his right eye that caused significant swelling, requiring hospitalization.",1
"An employee was working on a hot press in a semi-metallic area when the shoe became stuck between the insert and side of the box. He was attempting to release the shoe with a pry bar when his glove was pulled into the box, resulting in a left index finger amputation.",0
"An employee was operating a concrete dumper to transport soil to a bike/walking trail when the concrete dumper rolled over, pinning him underneath. He suffered a broken left arm and several lacerations to the face.",1
"An employee was struck by a wire reel that was being dragged by a pick-up truck, suffering two fractured legs.",1
A temporary employee was reaching for a part when his left forearm was lacerated by a horizontal blade saw. He was hospitalized and had surgery.,1
An employee slipped and fell resulting in a cracked kneecap.,1
"An employee was installing a gas shock on the lid of a large box in the dress-out area. The box requires two shocks and after installation of the first shock, another employee asked the injured employee to move the box that he was working on. The injured employee was in the process of moving the box when the lid closed and caught his hand between the lid and the box frame. The employee suffered an open left thumb distal phalanx fracture with a nailbed injury.",1
An employee was troubleshooting an ammunition handle box press machine. He was attempting to use a pair of plyers to remove a stuck part in the die when his right hand was caught between the upper die and the stripper sensor. He sustained a laceration and fracture to the fifth metacarpal on his right hand. The press was running and unguarded at the time of the incident.,1
"An employee was getting ready to empty a 30-yard dumpster and was opening the back door when plywood fell off and struck his left ankle. He was hospitalized with a broken left ankle, requiring surgery.",1
"An employee was standing next to a hot, metal plate when his cotton shirt caught on fire from the metal plate. The employee sustained third degree burns to the stomach and chest and second degree burns to the left arm.",1
An employee was hospitalized for anaphylactic shock after being exposed to cashew nuts while preparing to assist with a case in the cardiac catheterization lab.,1
"An employee was trying to retrieve concrete blankets that blew out of a truck on the highway when the employee was struck by another vehicle, suffering a fractured right ulna and humerus. The employee was hospitalized.",1
An employee was removing scrap from the die of a press when the die cycled and sheered off the tip of his left thumb up to his first knuckle.,0
"An employee's arm and hand were caught in a conveyor, requiring hospitalization.",1
"An employee was cutting steel with an oxygen/acetylene torch. The hose of the oxygen line had a small hole that caused a small fire to burst while he cut the steel. His polyester jacket melted from the fire, and he received second degree burns to his right arm.",1
An employee suffered a heart attack while working in the cooler.,1
"An employee was standing next to his forklift when another forklift turned a corner and struck his forklift, causing it to roll over his left foot. Two toes on the left foot (big toe and adjacent toe) were surgically removed.",1
"An employee was delivering parts at a customer location when he tripped on a mat and fell to the ground, breaking his elbow and shoulder.",1
An employee was using a nail gun and injected a nail into his wrist.,1
"An employee was visually inspecting the liner plates. While conducting the inspection, the employee's gloved right hand was caught in the machine roller resulting in a crushing injury to the hand. The machine was not guarded at the time of the incident.",1
"An employee was on a 24-foot ladder that was not fully extended, hooking up a new electrical connection, when he fell approximately 6 to 10 feet backwards off the ladder and landed on a generator below. He dislocated his left elbow and broke four ribs and four spinal tips. He was hospitalized.",1
"On October 17, 2019, at 9:50 a.m., an employee was clearing soft condiment from a blocked pipe on a displacement pump when his left index finger contacted the moving propellers inside the pipe, amputating his fingertip. The equipment was not de-energized and locked out at the time of the incident.",0
"On October 17, 2018, an employee experienced an allergic reaction to the flu vaccine administered earlier that day during a hospital-sponsored flu clinic.",1
"An employee fell while walking down stairs, suffering a spinal contusion.",1
An employee was working on the conveyor of a chocolate line when her right hand entered the exit port of the chocolate tank. The paddles of the agitator then rotated and amputated her right middle fingertip.,0
"An employee was stepping down from a rolling scaffold when the employee lost balance and fell to the ground, fracturing the left hip.",1
"An employee was on the back side of a knot saw when he bent over to pick something up. He then placed his left hand on the top of the saw and reached over the saw with his right hand. As he reached across the saw, he pressed down on the top and his left hand slid over the blade, resulting in the amputation of his left index and ring fingers at the first knuckle.",0
"An employee was troubleshooting equipment when the employee's left index finger was caught in a chain and sprocket, resulting in a partial finger amputation.",0
"Employees were attempting to lift a trailer with a forklift when the trailer slipped off the forks and fell on a stand underneath. The stand kicked out and hit the employee, causing a head injury that required hospitalization.",1
"An employee was on the shoulder of a highway unloading boxes from the bed of a material truck when a parked stripe truck rolled approximately 75 feet across the highway, side-swiped the material truck, and hit the employee. The employee's lower left leg was fractured in multiple locations with multiple lacerations.",1
"An employee was setting up to put tires on a trailer. The trailer was jacked up and he was putting jack stands under the front axle when the trailer bags released and the trailer dropped down, crushing his right index finger between the axle and the jack stand. His fingertip was amputated.",0
An employee sustained a left ring fingertip amputation while opening a hydraulic tank.,1
"An employee was removing a bolt cluster ring from a concrete foundation when he slipped on gravel and the ring struck his lower leg, fracturing his tibia and fibula. He was hospitalized.",1
"An employee slipped as he was exiting his tractor and fell to the ground, striking his left elbow against the pavement. His left elbow fractured.",1
"An employee tripped over the forks of a stand-up forklift and fell to the floor, suffering a hip injury that required hospitalization.",1
"An employee's finger was clamped between a forming plate and a field box, causing an amputation of the fingertip.",0
"On October 18, 2018, an employee was attempting to put down a dock plate when the employee's right middle fingertip was crushed between the dock plate and the dock, resulting in a fingertip amputation.",0
"An employee was laying down tubing. He reached to unlatch the tubing elevator with his right hand and his right index finger was caught between the joint of the elevator and the joint of the tubing. His finger was amputated just above the second knuckle, and he was hospitalized.",1
"An employee was moving cattle from a staging area into a horseshoe for slaughter. He was on top of a closed gate when a cow moved the gate. He lost his balance and fell about 5 feet to the concrete pad below, landing on his right arm and breaking his right wrist.",1
"An employee was un-hooking a strap from tank containers while standing on the fourth step of an A-frame ladder when the ladder collapsed and the employee fell to the ground below, landing on his right leg. He was hospitalized with a broken right ankle.",1
"At approximately 2:00 p.m., on October 18, 2018, an employee moved a recreational vehicle, exited it, and then walked in front of the vehicle. The vehicle was not in park at the time and it rolled over the employee, causing trauma to her lower torso and legs. She was hospitalized.",1
"An employee was troubleshooting a pump that was extracting slurry material from a tank. When the employee removed the pump's discharge hose, slurry material splashed and burned the employee. The employee was hospitalized.",1
A temporary employee was on a ladder cleaning a transfer when the employee slipped off the ladder and caught an arm in a pusher chain. The employee suffered a left triceps injury.,1
"A crane was carrying a load when its handle was bumped, causing the crane to release the load. The load dropped onto the injured employee's finger, crushing it and later resulting in an amputation.",0
"An employee was placing roofing supplies on a roof when he lost his footing and slid approximately 12 feet off the roof to the ground, dislocating his right ankle.",1
"On October 18, 2018, at approximately 2:50 PM, an employee was traveling from the locker room and through the warehouse area when he tripped over a pallet and fell on his right knee. He fractured the right kneecap and was hospitalized for surgery.",1
"An employee was on a 1-ton flatbed truck moving a piece of equipment when he fell approximately 4 feet off the flatbed truck and struck the ground, suffering a head injury and fractured pelvis. He was hospitalized and had surgery.",1
"An employee saw another employee using a power drill with a wobbling drill bit. The employee was attempting to adjust it with his gloved hand on the chuck when the drill turned on. His right middle finger was caught in the rotating chuck, causing a fingertip avulsion.",1
"An employee was pulling a wheeled rack in a holding cooler when one of his left-hand fingers was caught and crushed between the rack he was pulling and another rack, later resulting in a surgical amputation.",0
An employee was operating a lathe machine when the metal bar became loose and hit the employee's jaw. The employee was hospitalized with a concussion.,1
An employee was adjusting a part in the vertical molding machine when the piston of the machine came down on the left index finger resulting in amputation of the finger.,0
"An employee was walking through the welding department when the employee tripped on cords and fell, fracturing the left hip.",1
"An employee was walking to his car in the parking lot at the end of his shift, fell and fractured his wrist.",1
An employee was walking down the stairs when the heel of their boot caught on the step and the employee fell down five stairs to the concrete floor. The employee sustained a broken collar bone.,1
"An employee was driving a motorized cart when she impacted a wall. Her leg was caught between the cart and the wall, causing a severe laceration to her right leg.",1
An employee was helping to secure materials on a truck when a tie-down strap flew back and hit the employee's head above the right eye. The employee was hospitalized.,1
An employee was checking a machine and opened the top access where the gears are located. The machine was jogged and caught the employee's right index finger in the gear resulting in surgical amputation.,0
An employee fell off a ladder onto the floor and injured her left hip and right arm.,1
"An employee was cleaning up the recycling area and was walking backwards when he was struck by a mini-loader. The employee fell and the loader ran over his left foot, fracturing it.",1
"An employee took a misstep while delivering mail, suffering a fractured left ankle that required hospitalization.",1
An employee was helping to move an open pallet of goods when the pallet shifted and the load began to fall. The employee injured his right hip while trying to steady the load.,1
"An employee was using a power washer mounted on a flatbed truck to clean up a grease spill. When the employee started to add fuel to the power washer, a flash fire occurred and he received first degree burns to the face, second degree burns to the left forearm, and third degree burns to the elbow.",1
"A maintenance employee was performing a repair on the door of a rubber mixer.  He was adjusting the limit switch under the machine. When he attempted to climb out from under the mixer, his hand was caught in the rotor. The machine cycled and three fingers on his left hand were amputated.",0
"An overhead crane was being used with a four leg chain to assist in opening a door to a precast form. The hooks from the rigging equipment were attached to the side of the form. As the crane trolley traversed to the side, the trolley made it to its maximum allowed distance. The crane operator stopped operating at that time. A second employee saw the rigging go slack and placed his hand on the hook to remove it from the form. As he had the hook in his hand, the trolley moved back towards the center on its own while the employee’s hand was still on the hook. His middle finger was smashed between the hook and the form, amputating his middle fingertip from the middle of the fingernail to the tip.",0
"On 10/18/2018, at 8:25 AM, an employee experienced back pain while bending over to pick up material from floor level. He had been purging material from an extruder onto poly sheeting placed on the floor. The back pain caused him to sit on the floor, and he was unable to stand up on his own. He was hospitalized with lower disc inflammation.",1
An employee was removing dough that was stuck inside a machine. The employee's right index fingertip was amputated when the blade activated.,0
"An employee was attempting to relight a pilot light on a customer's hot water heater when the unit flashed, causing a propane blowback into the employee's face that knocked off his safety glasses and caused a possible injury to his eyes.",1
"An employee was attempting to clear scrap wood from a web saw's catch tray when the employee made contact with the saw blade, resulting in a right ring fingertip amputation.",0
"An employee was repairing a front rubber bumper on a vessel when the rubber bumper came loose, striking the scaffold the employee was standing on. The employee fell approximately 6 feet to the ground with a torch in hand and was burned on the left upper thigh and upper left neck.",1
"An employee was cleaning hospital rooms when she slipped on an unknown fluid and fell to the floor, fracturing her femur.",1
"An employee was descending from a two-step ladder. He was holding onto a core sampler when his right middle and ring fingers entered a 2"" gap between a hydraulic pipe. A tube then came down and amputated his two fingertips.",0
"An employee was putting down a roof deck when he lost his footing, tripped, and fell on the deck (same level), suffering spiral fractures to both bones in the lower right leg. Fall protection was worn at the time of the incident.",1
"An employee was stung by a bee and had a severe allergic reaction, requiring hospitalization.",1
An employee was climbing a ladder to install roofing flashing when the ladder slipped out from beneath him. He was hospitalized with a broken rib.,1
An employee was retrieving a log from a bundle of wood logs that was stacked high. The employee was struck by a log and sustained right leg fractures.,1
An employee was riding as a passenger in a utility vehicle (UTV) when the driver made a sharp turn and the UTV rolled on its side. The employee suffered a fractured right leg.,1
"An employee was delivering mail when she tripped over screws/rods sticking out of the ground and landed on the ground, dislocating her right elbow.",1
An employee was struck by a nail that ricocheted from another employee's nail gun. The nail struck his eyebrow and went behind his glasses and under his hard hat. The nail did not hit his eye. He was hospitalized.,1
"An employee was placing wings between separators feeding a wing segmenter machine when her left pointer finger was caught between the edge of the manufacturer's guard and the top of one of the separators, resulting in a fingertip amputation.",0
An employee was attempting to insert the lock pin when the machine started and crushed the tips of his middle and ring fingers resulting in an amputation injury to a finger.,0
"An employee was guiding a truck out a refining unit when the employee bent over to pick up an 8-inch hose and was struck by a vehicle, suffering a broken left heel.",1
"An employee was sitting in her office chair when she bent over to pick something up from the floor. The chair slipped out from beneath her and she fell to the ground, fracturing her right hip and suffering contusions to her head and elbow. She was hospitalized.",1
"An employee was preparing to push a cart of medicine for distribution when she was pushed by a client/individual and fell to the floor, fracturing her hip and requiring hospitalization.",1
"An employee fell and struck their head while checking a semi load, suffering a head laceration and possible concussion.",1
An employee was installing a new bar grating machine when his right thumb was caught and broke between the rods of the machine.,1
"An employee was adjusting the chuck jaws of a vertical mill so the material would fit and was placing a 24"" flange into the chuck of the mill. While she was removing the sling strap, the piece slipped and caught her right-hand first fingertip at the base of the nailbed between the material and chuck jaw, resulting in an amputation of her fingertip.",0
"An employee was preparing a molten metal alloy mix to pour a sample for quality testing when the alloy exploded, causing second and third degree burns to the back of his neck, arms, and legs.",1
An employee was walking on a conveyor belt when he fell and twisted his ankle.,1
"An employee was moving product using a crane when he became caught between his suspended load and a fixed object, suffering broken ribs.",1
"An employee was climbing down from a portable manlift when the cage area he was holding onto collapsed and he fell about 6 feet to the floor, breaking his wrist and pelvis. He was hospitalized.",1
"An employee was assisting in the setup of a crane with a fixed jib. As he was handling a tag line, the load moved quickly. When he grabbed the rope, it wrapped around his right middle finger and broke it, requiring hospitalization.",1
An employee was adjusting a cut and square machine which has two functions. First it compresses the ends of a flexible wire into a square and then cuts it into 36-inch segments. It uses two grinding wheels driven by a set of gears to cut the segments. The employee was checking the grinding wheels when the wheels activated and pinched his left hand in the gears. The employee's left middle finger was amputated. The machine was guarded at the time.,1
"An employee was working from an extension ladder to hang drapes on second-floor level windows when he transferred from the ladder to a small plywood ledge. The ledge gave way and he fell backwards, landing on top of a folding table. The table then broke and the employee landed on the floor. His tape measurer was on his belt and it impacted his lower spine. He was hospitalized with a fractured coccyx.",1
"An employee was filling orders using an order picker machine when his left leg was caught between the equipment and a rack, breaking bones.",1
"An employee was crossing the road to retrieve flagger signs when the employee tripped and fell to the road surface, fracturing the left forearm and wrist.",1
"An employee tripped over another employee's foot and fell to the floor, suffering a fractured right hip.",1
"On 10/19/2018 at 6:30 PM, an employee was trying to pick up a box when he fell over and hit his hip, requiring hospitalization and surgery.",1
"An employee was working with a crew to move a drum cutter from a line. While the crew was tugging on the machine, the employee's right middle finger entered a hole in the area the employee had grasped to pull. The employee's right middle fingertip was then amputated at the nailbed by the pulling or rocking movement. The hole was unguarded at the time of the incident.",0
"An employee was using a hand drill while building a pallet when her finger was caught in the chuck of the drill, resulting in a possible break or amputation.",1
An employee was clearing a jam in an air filtration system when another employee re-energized the machine without realizing the injured employee was still working inside it. The blades activated and amputated four fingers of the employee's left hand.,0
"An employee was stacking trusses for shipping. He pushed a truss toward a press and was standing between the truss and press when the back/bottom edge of the truss struck his legs, knocking him forward. He then fell back onto the truss, which allowed his right foot to become caught in the press rollers. His lower right leg and foot were crushed.",1
An employee was monitoring a plating tank when the employee tried to retrieve a part that fell into the tank. The employee came in contact with the plating solution (hexavalent chromium) and suffered an infection.,1
"A temporary employee was inside a portable toilet as other temporary employees were steam spraying a pipe when a welding rod shot out from the pipe and penetrated the portable toilet, striking the employee in the abdomen. She was hospitalized and required stitches.",1
An employee's fingertip was amputated while installing racking for a solar system.,0
"An employee was driving a school bus on a field trip. At a stop, he tripped on a curb and impacted the ground, fracturing his wrist and ribs and requiring hospitalization.",1
"An employee was cutting an 8-foot-long vertical section of an 18-inch-diameter pipe with an oxygen and propane torch when the pipe twisted and fell on his foot after the final cut. His right foot was de-gloved, requiring hospitalization.",1
"An employee was unloading corn from a dump bin attached to a skid loader. He was standing at the back of the dump bin and pushing it upward to get it to dump its contents. As he pushed up, his left hand was placed between the fork and base of the dumpster. The base then lifted up, shifted, and came down and pinched his left fingertip. As he pulled his hand away, his fingertip was amputated.",0
"An employee was manually moving a belt on a fan when his hand slipped and his left index finger was pulled between the belt and pulley of the motor, resulting in a partial amputation of the finger. The fan was locked out at the time of the incident.",0
"An employee was setting up a double tee in a storage section when his finger was caught and crushed between the double tee, resulting in a partial finger amputation.",0
"An employee was inspecting a belt on a refrigeration unit when the unit started. His thumb was pulled into the belt/pulley system, causing a partial thumb amputation.",0
An employee was operating case packing machinery when her right index fingertip was caught in the machine and amputated.,0
"An employee was helping to load a truck at a loading bay when he turned around and was struck by a reversing forklift, suffering a fractured ankle.",1
"An employee was transferring from a blowout prevention structure to a man basket when he fell approximately 12 to 13 feet to the ground below, fracturing his pelvis and ribs. He was hospitalized. The employee's lanyard was untied at the time of the incident.",1
"An employee was walking down a step when the employee fell approximately 10 inches to the floor, breaking the left tibia.",1
"An employee was moving dirty linen to the laundry room when her right hand entered the hinge side of the door as it was closing, catching her middle finger between the jam and the door. Her right middle fingertip was amputated.",0
An employee was working in a ditch and was struck by a stolen vehicle. The employee sustained nose and lower back injuries.,1
"An employee was unloading a trailer containing 600-pound rolls of roofing materials when a roll of material rolled off the trailer and struck his right leg, breaking his tibia and fibula. He was hospitalized and had surgery.",1
An employee was working on a procedure checklist at a splice table machine. His hand was on a bar support above the roll break when it was caught by the roll break and his fingers went into a small gap. His left ring finger was amputated up to half of the nail.,0
"An employee was organizing merchandise on an upper shelf when she lost her balance and fell on her right hip, fracturing it and requiring hospitalization.",1
An employee was closing the door at the back of a trailer truck when the driver pulled away from the dock and the employee fell to the ground. He suffered broken ribs and was hospitalized.,1
"An employee was cleaning a mixer machine and was attempting to scrub the paddle inside the machine when the paddle cut half of his finger, resulting in an amputation.",1
"An employee fell from the back of a box truck to the ground, fracturing an arm.",1
"An employee was operating a table saw when the blade cut his left index finger, causing an avulsion that resulted in a fingertip amputation.",1
"An employee was entering a building and pushed the door open with his foot when the door shut on his right lower arm, causing a contusion that required hospitalization.",1
"An employee was getting down from a roof using a scissor lift when he fell 30 feet to the base of the lift scissor mechanism, suffering internal bleeding, kidney damage and multiple fractures to both legs that required hospitalization.",1
"An employee was holding a bolt while another employee was operating an impact driver to install the bolt into a metal shredder. The employee's glove was caught by the bolt, causing a partial amputation of his left index finger.",0
"An employee was rolling caution tape while walking backwards near a concrete manhole opening when he tripped and fell backwards into the open manhole, hitting his head on the concrete manhole rim. He suffered a skull fracture and bleeding in the brain.",1
An employee was directing an overhead crane from the ground. The employee noticed that the load did not appear to be rigged correctly. The load was brought back down by the crane operator. The employee was re-rigging the load and moved one of the 2x2 boards when her right middle finger was caught under the load. The weight of the load amputated a 1/4 inch of her fingertip.,1
An employee was riding a horse to perform pen moves when the horse became spooked and bucked the employee off. The employee suffered a broken leg.,1
"An employee was setting up a precast concrete bed when his finger was crushed between the sled and end of the precast bed, resulting in a partial finger amputation.",0
"An employee was using an overhead crane to lift a 200-pound part and fixture to be welded. As the part was lifted, it swung upright and the employee's left thumb was caught and crushed between the table and part, resulting in a medical amputation to the thumb tip above the knuckle.",0
"An employee was installing a door rail into a drilling and dowel inserting machine when the employee attempted to adjust the position of a rail so it would be tight against the fence. At the same time, the machine was activated via the foot control and the employee's fingertip was pinched between the rail and hold-down clamp when it closed. The employee suffered a partial fingertip amputation (finger pad; no bone loss).",0
"On October 20, 2018, employees were in the process of removing and replacing a telephone pole. As they prepped the area, the pole fell and struck an employee. She suffered vertebrae fractures and was hospitalized.",1
"An employee lost footing while loading materials onto a truck and fell face first onto concrete, suffering a broken jaw.",1
"An employee was unloading tables from a golf cart when a table fell, hit the power pedal, and launched the golf cart forward. The employee was pinned between the golf cart and a large appliance, suffering leg fractures that required hospitalization and surgery.",1
An employee was attaching an inspection onto a conveyor screw when a cooker gate opened and spilled hot oil that caused second degree burns to his neck and back.,1
"An employee was performing maintenance to a conveyor screw system that contained a cooker with hot oil when the oil splashed his right arm and shoulder, causing second degree burns. The cooker was not locked/tagged out at the time of the incident.",1
"An employee had her safety vest on and was using a walker stacker to pull down a pallet of bags from a steel rack. She backed up against a beam and the walker ran over her foot. Her foot became caught between steel and the walker, causing a compound fracture to the big and little toes. She was hospitalized and had surgery.",1
"An employee was using a band saw to cut a beef shank when the meat flipped and pulled his right finger into the band saw, amputating his right index finger at the first knuckle.",0
A terminated employee attacked another employee who was then hospitalized for a heart condition.,1
An employee was struck by a car when guiding it on and off an alignment lift.,1
"On October 21, 2018, an employee was walking on a concrete roof when the employee tripped over a broom that was laying on the roof and fell to the same level surface. The employee suffered a broken right femur and required surgery.",1
An employee was hospitalized after falling off of a ladder.,1
"An employee was oiling a chain and sprocket. He was attempting to brush some debris off of the machinery when his glove was caught in the sprocket, pulling his left hand into and around the sprocket. His left index, middle, and ring fingers were partially amputated.",0
"An employee was using a pallet jack to pull cases in the freezer. He positioned the pallet jack close to the racking and dismounted it. The pallet jack then ran into his left ankle, fracturing it. He was hospitalized and had surgery.",1
"Employees were moving containers on tugs. An employee was connecting one dolly to another when the tongue of the dolly fell, resulting in an amputation of the employee's right ring fingertip.",0
"On October 21, 2018, an employee was working with another employee to replace a low temperature hot water pump. When he went to disconnect the pump, the water sprayed on him, scalding his left arm and the left side of his torso. The water line to the pump was not turned off at the time of the incident.",1
"An employee was riding on the side of a garbage truck when the employee's right foot became wedged between a small push cart and the truck. The employee felt pain in the lower leg, fell off the truck, and was unable to get up. The employee was hospitalized with a right ankle injury.",1
"An employee was attempting to clear out bridged material from a support hopper in the compounding process. The employee opened the bottom of the hopper to insert a tool to break up the material. Upon clearing the jam, the slide gate closed while his hand was in the zone. The employee's middle fingertip on the right hand was pinched by the slide gate as he pulled his hand out, resulting in a fingertip amputation.",0
"On October 21, 2018, an employee's thumb was amputated by a hand tool/utensil.",0
An employee was troubleshooting equipment. The employee's hand was on the grounding of the equipment's static bar when static electricity discharged through the box and shocked the employee.,1
"An employee was welding and repairing a grapple hook on a knuckle boom loader. The lift driver raised the grappler from the ground to reposition it so the employee could continue welding. The grappler then swung swiftly due to being attached to a come-a-long and struck the employee in the left ankle, fracturing and dislocating it. The employee was hospitalized.",1
"An employee was moving a pallet with a forklift. As he was turning, he backed into the rack behind him. This in turn pushed his body into the windshield of the forklift, causing it to break the glass protective screen, and his body bumped the forklift. He suffered lacerations to the left side of his face and fractured ribs.",1
An employee had an allergic reaction to cleaners used in the restroom.,1
"While delivering a package, an employee missed a 2"" to 3"" step and fell, breaking the ankle in three different locations.",1
"An employee was wiping excess grease from the clamp of a tube bender when the employee's left ring finger was caught in the clamp of the tube bender, resulting in a partial amputation.",0
"A temporary employee was filling carts on a rail system with concrete. There were two carts on the system. His hand was on the front cart when a second cart was pushed into the first cart, pinching and smashing the employee's little finger and resulting in a fingertip amputation.",0
"An employee was cleaning gutters on a residential home. He was working from a ladder and climbed onto the roof to reach a section that was beyond the reach of the ladder when he slipped and fell 20 feet from the roof to the concrete below. He suffered a head laceration, requiring hospitalization and staples.",1
"An employee was sitting on a partially open tool box when the tool box lid closed on and pinched his left ring fingertip, resulting in a fingertip amputation.",0
"An employee was mowing the back side of an apartment complex when he felt a sudden burning in his chest. He looked down and had a gun shot wound in his chest, requiring hospitalization.",1
"An employee was flagging trucks into a job site when a pickup truck drove through the construction zone and struck the employee, who suffered two broken ribs and a bruised elbow.",1
"An employee was standing behind a truck when a joint of pipe was pushed and landed on his ankle, causing him to fall and fracture his left ankle.",1
"An employee was test driving/being trained on an ATV when he hit rough terrain. He was thrown from the ATV onto a hard, rocky terrain, breaking his right scapula and a right-side rib. He was hospitalized.",1
"An employee fell 14 feet from a fixed ladder while climbing up to access the roof, hitting the ground below. He suffered two fractured ankles, a fractured pelvis, and other bruises and contusions.",1
"While sorting packages on a conveyor, an employee attempted to push a loose bolt that came out of a package and became lodged between the roller's transition plate and incline conveyor belt when the conveyor pinched the employee's right index fingertip.",1
"An employee's right ring fingertip was pinched between sections of an interlock belt, resulting in a fingertip amputation. The belt was unguarded at the time.",1
"An employee was balancing 15 4x8, 3/4-inch-thick sheets of plywood while another employee attempted to remove one sheet from the stack. The sheets of plywood then slipped and fell onto the employee's left foot. He sustained fractures to four toes, the top of his foot, and possibly his left ankle.",1
"An employee tripped over a pallet and fell on a concrete surface, suffering a fractured hip that required hospitalization.",1
"An employee was operating a saw to cut plastic boards when he made contact with the saw blade and sustained a laceration to his middle right finger, resulting in a partial amputation of his fingertip.",0
"An employee was walking and carrying dialysis fluid when she opened a door and tripped over a scale. She fell, dislocating her left shoulder and fracturing her left arm.",1
"An employee was helping another employee with a test rig tower when the splitter came out of gear and the metal tub came loose, falling and striking the employee on the head and arm.",1
"An employee was cleaning under a label machine conveyor to remove labels that fell off a production line. As she attempted to pull a label that was stuck, her left ring and middle fingers were amputated at the distal phalanx.",1
"An employee was backing a telehandler off of a dovetail trailer when the right rear tire rolled off the side of the trailer, causing the telehandler to roll over. The employee suffered head injuries, a broken clavicle, broken ribs, and two fractured vertebrae, requiring hospitalization.",1
An employee was moving toward the side of a bale press to pick up a cotton sample bag. The press pushed him and he was thrown to the floor. He suffered a pubic bone fracture and was hospitalized.,1
"An employee was doing general cleaning when he slipped on a piece of meat and lost his balance. As he attempted to catch his fall, his left middle fingertip was caught on the blade of a nearby deli slicer, resulting in a fingertip amputation (no bone loss),",0
"An employee suffered an allergic reaction to something at the bank while processing day-to-day teller transactions, requiring hospitalization.",1
"An employee was standing next to a steel road plate that was suspended and being moved by a backhoe. While in transit, the suspended road plate started swinging and struck the employee's right foot, which was then caught between the road plate and a concrete curb, resulting in the amputation of his toes.",1
"An employee was operating a dough depositor machine when the employee's right hand was caught in the machine, resulting in a right middle fingertip amputation.",0
An employee was packing parts from a flow wrapper when his finger became stuck in a piece of the equipment. The flow wrapper blade then caused a finger amputation. The equipment was guarded at the time of the incident.,0
"An employee was conducting a team lift of a piece of equipment that weighed 135 pounds to put it up on a table for cleaning when the employee strained the lower left abdomen, requiring hospitalization.",1
An employee was operating a powered pallet jack when the employee's right foot was trapped between the pallet jack and a rail. The employee sustained a broken right ankle and broken right lower leg.,1
"An employee was removing nuts and bolts from the brace for a fuel tank. The tank shifted and pinned his left arm and leg, breaking the arm.",1
An employee was walking on the pedestrian walkway along the perimeter of the building when she tripped and fell hitting the left side of her face on a bollard. The employee was hospitalized.,1
"An employee was loading an order of office chairs onto the second level of a semi-trailer truck, which required other employees to pass the chairs up to him so he could roll them back across plywood flooring that he was sitting on. He then attempted to stand up on the edge of the sheet of plywood when the plywood shifted and tilted vertically, causing him to fall approximately 4.5 feet to the wooden floor of the trailer. He landed on his back, head, and neck. His head struck the floor, bounced up, and struck the floor again as it came down. He sustained back, neck, and other bodily injuries, requiring hospitalization.",1
An employee was standing on the side of the excavation and leaned in to check the source of a noise coming from inside the trench. The concrete gave in where the employee was standing and the employee fell. The employee sustained broken ribs on the left side.,1
"An employee was using a hoist and sling to move a shaft. After the employee hooked the sling to the shaft, the up button was pressed on the hoist's wireless remote. The strap then tightened on the shaft and the employee's right hand was caught between the two, causing an amputation of the right middle fingertip above the knuckle.",0
"An employee was attempting to maneuver a headstone when it slipped and fell on the employee's hand, amputating the end of his right middle finger.",0
"In a cleanout area at a plant, an employee was cleaning out the tailgate of a dump truck that was tilted up. A piece of asphalt in the dump body of the truck broke free, falling and striking the employee in the right leg, ankle, and foot. The employee suffered five broken toes and a broken ankle, as well as a laceration on the right leg requiring stitches, and was hospitalized.",1
"An employee climbed a short wooden ladder to a landing platform. While turning around to face the extension ladder, he fell to the ground, injuring both ankles.",1
An employee fell approximately 7 feet from the top of a concrete wall to the bottom of a stairwell after plugging an extension cord into an outside outlet. The employee sustained a fractured pneumothorax and injuries to the left ribs and lung.,1
"An employee was entering the cab of his tractor trailer and opened the door as the tractor trailer beside him was pulling out. His left hand was then caught between the door and the adjacent trailer, suffering swelling, lacerations to the index and middle fingers, and fractures to the ring and pinky fingers.",1
"An employee was getting off a forklift when he missed a step and fell backwards, hitting his head on a parked pickup truck nearby. He suffered fractured vertebrae.",1
"An employee was picking up a skid/small steel I-beam when the skid slipped off and fell on his right foot, fracturing it.",1
"On 10/23/2018, at 2:00 PM, an employee was unloading an 80-foot boom from a trailer. The ramp from the trailer was not lowered at the time. He attempted to stop the lift, but the wheels were already at the edge of the trailer, and the momentum of the boom caused the back two wheels to slide off the trailer. When the wheels hit the ground, the boom had a catapult effect that threw the employee up onto the controls. His foot was still in the accelerator shroud, and his body momentum in combination with his foot being held by the shroud caused the tibia and fibula in his lower right leg to break. When the safety harness lanyard engaged and pulled him back into the basket, he landed on his broken leg, causing the bones to break through his skin.",1
"An employee was lifting a spoil box out of a cart when the employee's fingertip was pinched between the box and cart, resulting in a left pinky fingertip amputation.",0
"An employee was performing repairs on a shredder machine when a shaft fell and caught his left index and middle fingers, causing broken fingers and tendon injuries.",1
An employee was using a handheld grinder to cut off steel bolts on a dock bumper when the grinder grabbed his gloved hand and amputated his left index fingertip.,0
"An employee was working on a telephone pole from a ladder. The employee fell while descending the ladder, suffering two broken right-side ribs, fluid on the lungs, and a bruised kidney and liver.",1
An employee was helping a worker lift a dock plate when the dock plate fell and caught the employee's finger between it and the dock. The employee's right index fingertip was amputated.,0
"An employee was exiting a machine's lower level. As he stepped up, he fell 1.5 feet backwards from the second riser to the floor, suffering bilateral fractures to the wrist and a head contusion. He was hospitalized.",1
"An employee was in an area cleaning when she was struck by a forklift truck, crushing and breaking her foot.",1
The injured employee was walking down the length of the QA final bench or pipe inspection area. One employee pulled the release cord while another employee pushed the bridge arm down button that signals the hydraulic bridge arms to rotate approximately 90 degrees to the stop position. The arm struck the injured employee across the chest and pinned him to the post at the stop position. The employee suffered bruising and contusions to the chest area including the lungs.,1
"An employee was part of a crew engaged in dismantling a mast climber type scaffold. The crew was attempting to fully retract the power unit grab hooks to clear the scaffold mast so it could be removed. One employee was positioned at the controls for the power unit while the injured employee knelt down next to the mast to control/verify the position of the hooks. The grab hook inadvertently contacted one of the rungs of the mast, causing it to tip over and strike the injured employee. The employee suffered broken ribs as well as a broken pelvis and sacrum, requiring hospitalization.",1
"An employee was moving from one location to another with a forklift. The employee was attempting to clear a rolling door when the doors caught the mast of the forklift. The employee's left leg was then caught between the unit and the left platform, causing a compound fracture to the leg.",1
"An employee was attempting to clear a paper jam from a moving machine belt when the employee's left hand was caught by a pickup cylinder on the belt. The employee suffered a severe laceration to the back of the hand and palm, as well as a broken middle finger. The employee was hospitalized.",1
"An employee was getting out of her car and tripped over a laptop bag, breaking her foot and ankle.",1
"Employees were laying sewer pipe when an employee was struck by a pipe, fracturing his hip.",1
An employee had just completed a tooling change on a forge press and the machine was restarted. The employee then attempted to remove some dust or miscellaneous materials from the machine and his hand contacted moving parts. He suffered an amputation of the middle finger on his right hand to the first knuckle.,0
Two employees were working together to lift a manhole cover. One employee placed a claw hammer in the manhole cover to lift it approximately 12 inches when the hammer slipped. The other employee tried to grab the cover but it fell and amputated his left middle fingertip.,1
"An employee was driving a personnel carrier (cart) outside of a plant (courtyard area) when the employee ran into a 4x4 piece of lumber, which caused the cart to fall on its side. The employee fell off in the opposite direction of the falling cart and impacted the concrete floor, suffering a broken bone near the hip socket.",1
"A material handler was running an overhead crane from on top of a table, stacking one rip cut plate onto another to create a two-piece lift. As he approached the edge of the table, carrying one piece on the crane, the injured employee came up to the table and tried to help him line up the piece on the magnet with the piece that was on the table. The injured employee's hands were on top of the plate that was on the magnet. As the plate on the magnet was lowered onto the plate on the table, the employee's finger was pinched between the two plates, cutting off his right ring fingertip above the knuckle.",1
"An employee fell while exiting the back of a truck, suffering four broken ribs.",1
"An employee was setting wall forms when his right thumb was smashed between two forms, resulting in an amputation.",0
"An employee fell during work and injured her knee, requiring surgery.",1
"An employee was positioning kegs on his truck when a keg (165 pounds) dropped on his right hand, fracturing it and requiring hospitalization.",1
"An employee's electronic cigarette batteries ignited, catching his pant leg on fire and leading to second degree leg burns.",1
"A Cardinal Logistics Management Corporation employee was operating a forklift to drop a load when the forklift tipped over. The employee hit his head on the overhead guard of the forklift, requiring hospitalization for a C-1 neck fracture.",1
"An employee stepped backward, tripped, and fell backward, striking her head against a wall and suffering bleeding in the brain.",1
"An employee was installing flashing on a 19th level balcony when he lost his balance and fell backwards off the fourth rung of a ladder, hitting the balcony landing and fracturing his lower vertebra. He was hospitalized.",1
An employee was stabbed in the stomach by a homeless man on the jobsite.,1
"An employee fell from a truck to the ground while loading the bulk truck with material, suffering arm, wrist, and rib fractures.",1
"An employee was operating a shear when his hand got close to the point of operation. When the shear was actuated, the blade amputated his left ring fingertip.",0
An employee was assaulted while stocking freight in an automotive department and was hospitalized with a fractured skull.,1
"An employee was attempting to open up a broken garage door when his right pinky was caught between two panels of the garage door. His pinky was sliced open and broke, requiring hospitalization and surgery.",1
"An employee was pulling a differential when the employee's fingers were caught between the differential and another piece of metal, resulting in a middle finger amputation and partial index finger amputation.",0
An employee was working at a residence and began feeling light headed with chest pains. The employee was hospitalized for dehydration.,1
An employee's right index finger was crushed between a crane and a ring mount; the tip was amputated.,0
"An employee was conducting routine cleaning using a long hoe to scrape and collect excess material (ammonium sulfate) from a moving conveyor line when she was struck by and caught in the line. Other employees came to her aid and cut her loose. She was hospitalized with injuries to her neck, chest, and sternum. The conveyor line was unguarded at the time.",1
"An employee was unstrapping a tote container that had been loaded onto a stake bed truck. The strap became unfastened and struck the employee's left hand, resulting in a partial amputation of the tip of the little finger.",0
"An employee fell off a kiln car to the ground, about 38 inches below. The employee suffered a hip injury that required surgery.",1
"An employee was inspecting a low sloped roof that was damaged in a hurricane when he fell 15 feet through a skylight to a concrete floor.  He sustained a broken left hip, broken tailbone, three broken ribs, a torn spleen, a left orbital eye fracture, and bleeding on the brain. He was hospitalized.",1
An employee was struck and pinned against a forklift by a second forklift. The employee suffered a broken pelvis and was hospitalized.,1
"A temporary employee was in a flat grain storage bin using a sweep auger for cleaning when the employee stepped into the floor auger discharge hole, severing the right lower leg.",1
An employee was cleaning an electrostatic paint gun when the trigger was pulled and air pressure from the electrostatic paint gun injected undercoating material into his left index finger. The trigger was not locked out and the electrostatic air valve was not turned off at the time of the incident.,1
"On October 24, 2018, at approximately 2:30 PM, an employee was exiting the cab of his truck when he fell backwards to the asphalt parking lot and struck his head. He was hospitalized for a laceration and possible concussion.",1
"An employee fell approximately 4 feet off a ladder to the floor while working on a trailer, suffering a broken right arm and forehead laceration.",1
"On October 24, 2018, an employee was moving two bar stocks with a magnet when a piece of bar stock fell on the employee. The employee suffered two broken ribs and a fractured pelvis.",1
"On October 24, 2018, an employee was cleaning inside a grain bin. The foot peg that the employee was standing on came loose, causing him to lose his balance and slide down the bin slope. He suffered a broken tailbone and was hospitalized.",1
An employee was attempting to close the sliding door on a silo to conduct maintenance (replacing the gate) when the employee's right hand was struck by the sledge hammer. The employee's right index finger was crushed.,1
"An employee was working with a driver who was backing a box truck into the garage of a newly built home to unload construction materials. He was standing behind the truck guiding the driver towards the garage. The ramp had been pulled approximately 8 feet out of the back of the box truck at the time. As the driver was attempting to position the truck, the employee was pinned between the ramp and the inside door jam of the garage door, fracturing his upper leg. He was hospitalized.",1
An employee was adjusting a machine when the foot clamp was pressed and the employee's finger was crushed and amputated in a clamp.,0
An employee was trying to clear rubber from a mixer when the door came down and crushed the employee's left arm. The arm was surgically amputated.,1
"An employee was creeling on a beamer. The employee was tying in (from a semi-crouched position) a package on the bottom row of the creel. As the employee finished tying in the package, the employee side-stepped (without standing) to start tying in another package that was on the same row, but one creel section over. While side-stepping, the employee's left foot hit the heel of the right foot, causing the employee to fall from the same level to the floor. The employee landed on the concrete floor, suffering a partial fracture to the left hip on the exterior of the bone.",1
An employee was clearing a clogged drain. The conveyor scraper blade caught the employee's hand between the drain screen crushing three fingers.,1
"An employee was traveling on an ATV to inspect a fire line when the ATV overturned, breaking his ribs.",1
"An employee was trying to hook up a trailer. As he lowered the landing gear with a crank, the crank handle slipped and struck him in the jaw. He was hospitalized, needing surgery.",1
"An employee was moving freight when she tried to move an electric pallet jack out of her way by releasing the lever on the electric pallet jack and allowing it to roll away. She was standing between the pallet jack and the dock door when the pallet jack rolled towards her. She was caught between the pallet jack and the dock door, injuring her right leg.",1
"An employee was manually taking folded rubber off a skid when his hand slipped off the rubber, causing him to lose his balance and fall to the concrete floor. He was hospitalized with a fractured right hip.",1
An employee was struck by a forward moving forklift being driving down the aisle by another temporary worker. The employee's leg was pinched between the side of the forklift and a pallet resulting in fractures.,1
An employee was sharpening a cup cutter. The employee was sprayed in the face with SaniDate chemical when a pressurized line broke.,1
An employee was spraying and cleaning metal rollers near a conveyor belt that was in a raised position to clean underneath it. She tried to pull a piece of meat out from between the metal rollers when her right hand was pulled in by the moving conveyor belt. She sustained a broken right index finger and had her right ring and middle fingers surgically amputated. The belt was moving at the time of the incident.,1
"An employee was jacking up the front end of a truck when the jack slipped and hit him in the forehead, causing a contusion and large gash/cut on his forehead.",1
"An employee was cleaning a tarp underneath a conveyor from a ladder. As he turned on the ladder to reach behind him, he lost his balance and fell off the ladder, suffering back and leg injuries.",1
A maintenance employee was attempting to remove clogged sand from an air blower hole that was approximately 2 inches in diameter when the blower's auger amputated the employee's right index fingertip.,0
"An employee fell from a fiberglass ladder, suffering a broken right leg and ankle. The employee was hospitalized.",1
A temporary employee was trying to remove plastic from a termination machine when the machine actuated and caused an amputation to her finger. The machine was guarded at the time of the incident.,0
"An employee was using a vibratory truss screed for concrete paving. The employee was guiding a winch cable back onto the cable spool; the nip point between cable and spool caught the employee's hand, severing the fingertip.",0
"While stepping down from a step, an employee lost his footing and fell to the ground. His arm was broken, and he was hospitalized.",1
An employee's hand was caught in a rotary grinder. Two of the employee's fingers were amputated.,1
"While making a perimeter check around a courthouse building, a security guard was involved in a hit-and-run accident. The employee suffered a cracked pelvis and was hospitalized.",1
"An employee was trying to close the door of a yard jockey. As he pulled on the door his finger was caught and crushed, resulting in a fingertip amputation.",0
"Employees were servicing a tool and attempting to remove the pivot pins while the tool was in the horizontal position. The first employee was kneeling and facing the tool, while a second employee was operating the grab handle to remove the pivot pins. The first pivot pin was successfully removed.  While attempting to remove the second pivot pin, the second employee rotated the handle from the unlock position to the lock position. He then rotated the grab handle downward. During this operation, the pivot pin came out and allowed the grab handle to rotate past its normal stop (lock position). The second employee's right middle finger was then caught between the grab handle and a weldment, resulting in a fingertip amputation.",0
"An employee's right hand was on the front of a moving bundle (cube) of pavers to check the quality of product. His finger was then pinched between the bundle and the roller on a non-powered roller conveyor, resulting in multiple contusions and the right ring fingernail being removed. The weight of the bundle was approximately 3,300 lbs.",1
"On October 24, 2018, an employee's thumb was amputated by an object that was being lifted or handled.",1
"A valve was installed on a sewer line. When the line was repressurized, a hose with a brass fitting came off the line and struck an employee in the face. The employee suffered a fractured jaw, a broken nose, shattered cheekbone, loss of teeth, and cuts and abrasions to the right eye.",1
"An employee was descending the front stairs of a house after making a delivery when he tripped and impacted the stairs, suffering head trauma.",1
"An employee fell from a drilling rig when its wing collapsed, landing about 14 feet below and suffering injuries to the right leg.",1
"On October 25, 2018, an employee was pushing a casing through a finishing machine when the employee's left-hand fingers were caught and fractured in the machine's rubber rollers. The employee was hospitalized.",1
"An employee was cleaning a V roller on a line when the employee's right middle finger was caught between the rollers, resulting in a fingertip amputation. The power was on at the time of the incident.",0
"An employee was walking to a desk and tripped over loose banding straps, falling to the concrete floor and suffering a left hip fracture.",1
An employee suffered a laceration and wrist injury while operating a roll groove machine.,1
"An employee fell, striking the wall with their shoulder and dislocating it. The employee was hospitalized.",1
"An employee was riding on the back of a garbage truck, standing on a foot platform and holding onto handholds. The truck hit some bumps on the road and the employee fell off, suffering a head injury and skin abrasion on the back.",1
An employee was cleaning ink from rollers when she lost her balance. Her hand was caught by the rollers and partially degloved.,1
An employee was reassembling pipe components after a valve replacement on a mud pump. A section of pipe crushed his finger against a pipe flange. The finger was surgically amputated.,0
"An employee was attempting to troubleshoot and repair a compressor blower in the rail yard and removed a filter using a hex head wrench. His left hand was inside the filter housing's air intake shaft when his middle fingertip came in contact with rotating rotors, resulting in a partial amputation of the left third distal phalanx. The compressor blower was not locked/tagged out at the time of the incident.",1
"An employee was on a platform, manipulating the inner diameter of a vessel with a hydraulic press using quarter-inch square steel tubing. The tubing became free and knocked the employee off the platform and onto the floor. The employee suffered injuries including contusions, lacerations, and broken ribs. The employee was hospitalized.",1
"While laying out a tarp at the end of the day, an employee fell about 10 feet off the edge of a roof. The employee was hospitalized for broken ribs, fractured back and a ruptured spleen.",1
An employee was measuring tank levels when he slipped and fell on the slick/muddy ground. He broke a vertebra in his back and was hospitalized.,1
"An employee was clearing a steam hose in a sulfur recovery unit. The hose sprayed the employee with hot condensate, causing steam burns to the thigh area.",1
"An employee was operating a press. When the machine cycled, his left hand was caught in the injection area. He suffered an amputation to the middle fingertip.",0
"On October 25, 2018, a forklift was depositing a load when it shifted laterally, striking an employee and causing broken bones and lacerations to the head.",1
"An employee was cutting meat in the cafeteria with a meat slicer when the meat slipped and fell. He reached to catch the meat and his thumb contacted the slicer blade, amputating the tip of his thumb.",0
"An employee was following a bison to another location to prepare for a medical operation when the bison turned to run. The bison ran into the employee, causing several injuries to the left cheek and shoulder area, including fractures, contusions, and lacerations.",1
"An employee was connecting wires on the line side of an electrical cabinet when an arc flash occurred, causing second degree burns to the employee's right hand, soft tissue of the neck area, and lower part of the face and right ear. The employee was hospitalized.",1
"An employee was clearing a rock from a truck tailgate when the tailgate closed on his right ring finger, resulting in a fingertip amputation.",0
An employee was climbing an extension ladder to access an HVAC system on a roof when he fell about 12 feet to the ground. He suffered a back and pelvis injury and was hospitalized; the pelvis injury required surgery. Gloves were being worn at the time of the incident.,1
"An employee tripped over the end of a rug and fell to the floor, suffering a fractured pelvis. The employee was hospitalized.",1
"An employee was removing a small section of exterior wall assembly above a precast concrete panel that was being removed.  While he was removing debris around the top of the precast concrete panel, the precast concrete panel shifted, causing his left middle finger to be caught between the top of the precast concrete panel and the bottom of a horizontal structural steel member above. His left middle finger had to be medically amputated.",1
An employee was pulling a sewer cover back into place when the employee's left middle finger was caught in the pinch point between the cover and the road surface.,0
An employee was unbinding cages on a live truck when a forklift operator backed over and fractured his leg. He was hospitalized.,1
"An employee was unloading shower doors from a straight truck when several pieces of glass in the truck fell over and pinned the employee against a rack with boxes on the other side of the truck. The employee suffered broken ribs, a bruised sternum, and a punctured lung.",1
"An employee used a forklift to lift a hopper bin full of wood fines. When the employee pulled the release lever on the hopper, it rotated and allowed the contents to be released. The employee pushed the hopper to release the remaining material. The hopper then rolled back, striking the employee's left ring finger. The employee sustained broken finger bones and a laceration. Gloves were not worn at the time of the incident.",1
"An employee fell about 15 feet from a collapsing scaffold to the ground while installing fascia, suffering fractures.",1
"An employee was helping to work on an 8"" water line when it erupted, striking the employee in the left leg and causing a deep laceration that required 100 stitches.",1
"An employee was walking down the stairs to a basement to make a repair when he slipped on the last few stairs, fell to the floor, and fractured his kneecap.",1
"An employee was working inside an interstate lane closure installing raised pavement markers when an automobile swerved into the work zone and struck his right elbow. His right elbow was fractured, requiring hospitalization and surgery.",1
"An employee was resetting a traffic barrel on its side when an automobile veered off the road and struck the employee. The employee sustained injury to the legs, ribs and wrist.",1
"An employee was transferring a load of copper cathode to a furnace when a piece of the cathode slid off a pallet and struck his lower left leg, lacerating it and requiring surgery.",1
"An employee was observing a saw operation when the saw blade broke and struck the employee, causing serious cuts to the employee's fingers.",1
"An employee was using a portable ladder to change ceiling tiles. While descending the ladder after changing a tile, the employee lost balance and fell to the floor. The employee was hospitalized with a laceration to the back of the head, several fractured ribs, and a contusion to the right hip.",1
An employee was mopping a room when the top of the mop handle smashed into an overhead light's protective glass cover. The glass lacerated the employee's right hand.,1
"An employee was connecting steel tube sections for the installation of helical piles. He was checking the alignment of two tube sections when one of the sections was turned in an effort to align it, and his left index finger was caught in in a bolt hole amputating the fingertip.",1
"A temporary employee was lifting a drum of product to be dumped into a mixer when the drum slipped and caught the employee's left middle finger between the drum and frame, resulting in a fingertip amputation.",0
"An employee was shot in the face, neck, and stomach while getting materials from a work vehicle, suffering trauma and requiring hospitalization.",1
"On October 26, 2018, an employee was retrieving change from a safe drawer when the drawer closed on the employee's thumb, resulting in a thumb tip amputation.",0
"An employee was shutting down a water pump. When the hose was disconnected, hot water was released and burned the employee's leg.",1
"An employee was cleaning a tanker car using a grit-blast hose and stretched it out to roll it up. The hose trigger button was then hit and pressurized grit was released, striking him in the neck. He was hospitalized with a laceration and contusions, requiring surgery.",1
"An employee was using a crane with a magnet to move steel. A steel plate detached from the magnet, and the employee's left ring finger was caught between it and another plate. The fingertip was amputated.",0
"An employee suffered a left arm fracture after being pushed by a guest and falling, requiring hospitalization.",1
"An employee was working on the slider section of a flatbed trailer tandem to determine why the slide lock mechanism was not functioning properly. Repairs were made and the employee needed the trailer tested to ensure proper function of the lock. During the testing process, the trailer brakes are applied and a pallet jack is used to pull the trailer, allowing the lock to engage. His middle finger entered the pin slot right as the trailer was starting to move. When this happened, the plate caught his middle fingertip, causing a deep laceration that resulted in a partial, surgical fingertip amputation.",1
"An employee was moving a manually extending roller section when his right index finger was caught in the rollers, suffering tendon injuries.",1
"An employee was passing a platform crossway when it collapsed and he fell about 5.5 feet to the concrete floor, suffering a concussion and fracture to the spine area. The platform did not have guardrails at the time of the incident.",1
"While exiting the truck shop, an employee mis-stepped off a 6-inch step and fell to the ground, breaking a femur.",1
"An employee was adjusting the jig fixture on a table saw when the jig slipped, causing an amputation of the employee's right index finger.",0
An employee was using a chop saw and amputated the right thumb tip.,0
"On October 26, 2018, an employee was unloading a container of furniture while standing on two boxes (about 2 feet high). He lost his balance and fell backwards.",1
"While working from a podium ladder, an employee lost balance and fell to the ground, suffering a broken left wrist and ribs.",1
An employee was operating the butter filler when her finger was caught and amputated inside the rotary valve.,0
"Maintenance employees were using a sliding C clamp to press bearings onto a shaft. As one maintenance employee tightened the C clamp by hand, the C clamp slipped off the bearing and pinched the injured employee's middle finger, resulting in an amputation.",0
An employee was removing a piece of stuck plastic from a corrugator. The corrugator cycled and her right index finger was caught in the machine's dies. The fingertip was amputated.,0
"An employee was pulled into a conveyor, with their clothing wrapped around a sprocket. The employee suffered internal injuries and amputation of fingers, and was hospitalized.",1
An employee was burned by hot water and a caustic cleaning chemical while rinsing out filling equipment. The employee suffered burns from the waist down to the kneecaps on both legs.,1
"An employee was operating a press brake, which cycled while the employee's hand was in the point of operation. The ram caused the amputation of the tips of the employee's ring and middle fingers.",0
An employee was adjusting the blade of a head saw when the employee's right index finger was caught in the blade and amputated. The saw was running at the time.,0
"On 10/26/18, an employee was operating a horizontal gun drilling machine when the employee's fingers were caught in the machine, resulting in an amputation of the index finger (1/2 nail) and the middle finger (first knuckle to the tip).",0
"An employee was placing a part in a metal bin. He attempted to open the bin door but it was stuck. When it came open, the force caused his left ring finger to become caught between the door and a rack, resulting in an open fracture that required hospitalization.",1
An employee was working on a trailer door hinge and fell from a ladder breaking the tibia and fibula.,0
An employee was driving a forklift out of a truck trailer when the truck trailer rolled away from the loading dock. The employee and the forklift fell to the ground. The forklift's back seat support hit and cut his head.,1
"An employee had just finished rigging a bundle of channel iron together to be lifted to the roof of a building. When the load began to lift, the employee was stepping back from the load to grab the tagline when he reached out and lightly placed his left hand against the load to steady it. At that time, the bundle of channel iron rolled inward, catching his left glove and pulling his hand in between two pieces of iron. He was able to pull his hand back immediately, but his left middle fingertip was crushed, resulting in an amputation (without bone loss) of the distal tip of his left middle finger.",0
"An employee was preparing to jet drain lines when a hose developed a pinhole and water shot out at 3,800 psi. The employee's hand was lacerated between thumb and finger.",1
"On October 26, 2018, an employee was in a trench inspecting a pipe connection when one of the side booms that was holding the pipe in place began to slide downhill. The pipe was then released from the clamp and struck the employee. The employee was hospitalized with a bruised kidney.",1
An employee made contact with an overhead powerline while setting a street light pole and received severe burns to the body.,1
An employee was attempting to unjam wood that was caught in a drive belt when she suffered a partial amputation of her right middle finger. The belt was unguarded and not locked/tagged out at the time of the incident.,1
"On October 26, 2018, an employee was torch cutting a steel racking system when the system struck and fractured the employee's leg, requiring hospitalization.",1
"Three employees stopped their PIVs to clean up a soap spill. The injured employee was standing outside the PIV when the second employee moved their PIV and struck the employee's right leg. The employee suffered a broken tibia and fibula, requiring hospitalization and surgery.",1
"An employee was struck by a reversing forklift, suffering a broken leg and ankle.",1
"An employee was performing a die change during a product change-over. The employee removed the chute and used a metal tool to scrap debris from the opening. The tool became caught in the auger, which pulled the tool and the employee's hand into the auger blade. The employee sustained complete amputations to the four fingers on the right hand. The auger was not locked/tagged out and was running at the time of the incident.",1
An employee was lowering a valve machine into the cradle using a hoist and got his right index finger caught between the lifting ring and the cradle. The fingertip was amputated.,0
"An employee was standing in the parking lot when he lit a firecracker and it exploded in his hand, causing a fracture, lacerations, and an amputation to the index and middle fingers at the first knuckle.",1
An employee put on gloves that had been previously used and suffered a chemical burn.,1
A temporary employee was attempting to clear a jam on a cross cut saw when the saw amputated three fingers.,0
"An employee was working on a milling machine when its drum caught his left foot, amputating the third and fourth toes.",0
Employees were constructing a tank battery and removing a bottom hatch with a grinder when a fire and explosion occurred from an empty tank. The injured employee received body burns that required hospitalization.,1
"An employee was attempting to wipe grease off of a mixer motor when the mixer shaft caught his left thumb, resulting in a partial amputation. The mixer was running at the time of the incident.",0
"On 10/27/18, an employee was helping to construct a parade float and was working on a wooden platform that was 54 inches off the ground. As he walked back to the ladder to exit the platform, he took a misstep off the side of the platform and fell to the ground, fracturing his thoracic vertebrae and requiring hospitalization.",1
"An employee was on the roof cleaning a skylight when the employee fell 25 feet through the skylight to the concrete floor, suffering head trauma and multiple fractures.",1
"An employee tripped and fell over the corner of a pack-and-play crib after opening it, suffering a broken left arm.",1
"An employee was grinding an I-beam when the grinder disk ruptured and blew into the employee's right leg, fracturing the tibia and requiring hospitalization.",1
"An employee was leaving the facility when she collapsed onto the warehouse floor, suffering a possible broken hip.",1
An employee walked into a stack of pallets and fell breaking their arm and shoulder.,1
"A maintenance employee was trying to remove a choker sling on a pulley when the choker became caught and the pulley counterweight fell, causing the employee's foot to slip off of the equipment frame and become caught between the frame and the pulley. The employee suffered multiple ankle fractures.",1
"On October 28, 2018, an employee was servicing a sheet ironer when the employee's right index finger was caught and severely lacerated between a gear and chain, requiring hospitalization.",1
"An employee was dumping a quench tank slag barrel into a dumpster when he grabbed the barrel and it slipped, creating a pinch point on the barrel and self-tipping hopper that amputated the distal phalanges on his right middle and ring fingers.",1
"An employee was cleaning a railcar that was previously carrying phenol material when the employee noticed a valve in the railcar was clogged. The employee applied steam to the clog for 20 minutes to melt the material. Once complete, the employee opened the valve, which had built pressure, forcing the phenol and steam out of the pipe and onto the employee's face and neck. The employee suffered first degree burns to the face and neck and was hospitalized.",1
"An employee was working on a shuttle car when the wheel ran over his right foot, breaking metatarsal bones and two toes. The employee was hospitalized and required surgery.",1
"The employee was bending a piece of 3/4"" diameter round bar in a vice and utilizing a 3"" length of pipe over the bar for leverage. The pipe slipped off causing the employee to lose balance. As a result, the employee fell to the ground and pinched their left index finger between the length of pipe and their body causing a fracture.",1
An employee was slicing onions on a slicer. She was grabbing an onion off of the slicer when the blade amputated her left middle fingertip without bone loss.,0
"Two forklifts were traveling in the same direction. The operator of the first forklift realized he had gone too far and stopped to turn around. When he started to turn, one of the forks struck the employee who was operating the second forklift in the left foot, causing a possible fracture to the foot/toe.",1
An employee was operating a machine and suffered the partial amputation of two fingers. The blade was unguarded at the time of the incident.,0
"An employee was walking/working on a roof and stepped through insulation, falling 8 to 12 feet onto a catwalk. The employee suffered multiple bruises to the neck, shoulder, and shin (tibia).",1
An employee was clearing jammed scrapped aluminum on a moving conveyor and suffered a fingertip amputation.,0
"An employee was in a derrick, making a connection. The employee's right thumb was caught and crushed between the drill pipe and the elevator, suffering an open fracture/dislocation.",1
"An employee tripped over an employee's feet and struck a locker door, injuring her head.",1
"An employee was installing a new ventilation system on the roof of a business and fell four feet through an opening about 24-34 inches between the catwalk and the various water system pipes. The employee suffered two fractured ribs, a laceration of the left ear, contusions and a skull fracture.",1
An employee was installing the pins in the exterior carriage basket of a machine when the drive struck the employee's right leg crushing it.,1
"An employee was backing into an industrial lift on the main floor with a cart of books. The lift was not on the main floor and he fell 12 to 13 feet down the shaft, with the cart of books landing on top of him. He suffered bleeding on the brain and a broken shoulder, and he required stitches to the back of the head and hospitalization.",1
"While preparing to clean the deli/bakery, an employee tripped and struck a pan of fryer oil. The employee sustained second degree burns to his hands and legs.",1
"Two employees were operating a side-by-side piece of equipment when it fell over and struck one of the employees. The employee sustained injuries to the head, knee, leg, and left hand. He was hospitalized and his left index finger was surgically amputated.",1
"An employee was in a trench clearing away dirt when the trench collapsed on the employee. The employee sustained two broken ribs and a collapsed lung, requiring hospitalization.",1
"An employee was lowering a hydraulic tank using a manual bridge hoist when his left pinky fingertip was caught between the clasping hook and the eye bolt, resulting in the removal of a small piece of his pinky finger pad.",1
"A mail carrier was walking across a lawn when he tripped over a stump and fell to the ground, fracturing his skull and spine.",1
"On October 29, 2018, at approximately 6:15 a.m., an employee was standing on the top step of the stairs connected to a truck cab when the step gave way. He fell to the ground, suffering three fractured ribs and a ruptured spleen.",1
"An employee was changing out a die on a machine when the machine suddenly rotated, pinching the employee's finger between the die and the handle of the machine. The tip of his fourth phalange was amputated as a result.",1
"An employee was operating a pallet jack when it crushed his right middle fingers. He was hospitalized, needing surgery.",1
"A dive team was attempting to investigate a target of interest near a buoy. After all pre-dive checks, the diver was given clearance to descend. He followed the marker buoy line to the bottom. When he arrived at the bottom, he lost the marker line and ascended back to the surface. Once he found the proper marker, he descended again to the bottom. He was not able to breathe with his breathing apparatus and lost communication with the dive master. When he was pulled to the surface, he was not breathing and required hospitalization.",1
An employee was treated for an infection after a metal fragment was lodged into her right thumb.,1
"An employee was setting up a molding run. While calibrating the machine, the board kicked back and splintered. A piece punctured the employee in the abdomen.",1
"An employee was straddling an I-beam and scooting across it when he lost his balance and the yo-yo to his harness grabbed him, pulling him backwards. He fell 15 feet from the above floor to the finished concrete below, fracturing his face and lacerating his ear.",1
An employee was climbing onto an excavator when the ring on his finger became caught on the equipment's mirror bracket. He received an avulsion on his left ring finger and was hospitalized.,1
"An employee was walking between buildings when she tripped and fell to the sidewalk, fracturing her left hip.",1
"An employee was oiling a conveyor chain when the employee's glove became caught in the chain, which pulled the employee's hand into the wheel cycle and chain. The employee experienced a fingertip amputation.",0
An employee was struck in the forehead by a metal hook and rope combination that was thrown to him by another employee. The employee sustained a forehead laceration and possible intracranial bleeding.,1
"An employee was on a ladder trimming drywall with a reciprocating saw when the employee fell off the second rung of the ladder to the ground, fracturing the left leg below the knee.",1
An employee was operating a food processor and suffered a partial amputation of two fingers on the right hand.,1
"A diesel mechanic was repairing the marker lights on a box truck. He was entering the body of the truck through the rear door when the gate chain caught his right hand and pulled it into the lift gate chain and roller, crushing the middle finger. The employee was hospitalized, needing surgery; the middle fingertip was amputated and the ring finger required pins.",1
An employee was slicing cucumbers with a manual slicer when the handle came off the slicer. The slicer then amputated the employee's left ring fingertip. Cut-resistant gloves were not worn at the time of the incident.,1
"An employee turned off an optimizing panel saw, went to the back of the machine, opened the blade compartment, and attempted to remove a piece of wood. The employee's right hand then came in contact with the still-rotating main blade, resulting in a partial amputation of the little finger between the first and second knuckle and lacerations to the right palm and thumb.",0
"An employee and two coworkers were attempting to unload hay that was strapped on the back of a truck. When he unstrapped the hay elevator, it slipped and fell 4 feet. The motor portion of the elevator struck his head and mouth, causing a severe laceration to his scalp and a loss of teeth.",1
"An employee was washing dishes in a catering facility when wet ceiling tiles fell and hit his head, causing head and neck contusions.",1
"An employee was replacing a fixed wheel on a tire rack when the tire rack, which was approximately 8 feet high, tipped over onto the employee as he removed one of the fixed wheels. The impact broke his back and ribs.",1
An employee was rotating an A-frame steel weldment on saw horses. As he was laying it down it slipped off the saw horses and his left pinky finger was smashed between the saw horse and the A-frame resulting in amputation of the fingertip (flesh).,0
An employee was welding a patch onto a fuel tank. A flash fire occurred when the employee passed the cutting torch over the tank. He received first and second degree burns to 15% of his body.,1
An employee was changing an insert in a lathe and amputated a fingertip.,0
"An employee was chasing after a youth psychology patient who was running down a hall. The employee got a hold on the patient but fell to the floor, breaking her left humerus. She was hospitalized.",1
"A dryer's fan was started up for testing. It caught an employee's shirt and pulled him in, causing back and arm injuries.",1
"On October 30, 2018, an employee was cleaning a blender when the blade, having been rotated manually, pinched the employee's left little finger and caused an amputation of the fingertip. The machine was locked out at the time of the incident.",0
An employee was cutting parts with a circular saw. It kicked back and the blade entered his left bicep.,1
An employee was walking down an embankment when his leg gave out. He suffered a torn quadriceps.,1
An employee was grinding a steel beam for grounding bracket installation when a gantry crane ran over his foot and crushed it.,1
"On October 30, 2018, an employee was working with a crane, trying to remove lifting forks from a pallet. The employee's left hand was crushed and fractured between the lifting forks and the post supporting the stowed boom. The employee was hospitalized.",1
An employee was boring a 28-inch hole using a concrete boring machine. The machine's anchor bolts broke and the machine spun around and struck the employee causing a left arm fracture.,1
An employee was hoisting a snubbing unit with his hand on the unit  and got his hand caught between the snubbing unit and the derrick resulting in amputation of the right thumb.,0
"An employee was laying metal floor decking on the second floor of a building. While dragging a sheet of deck, the employee fell, landing on a 4-foot pier cap about 18 feet below. The employee suffered two broken ribs, a broken left arm (between the shoulder and the elbow), and a fractured pelvis. Fall protection was not being worn at the time of the incident.",1
The injured employee was on an 8-foot step ladder holding piping while helping another employee install HVAC piping. The employee fell from the ladder and suffered a broken collarbone and a head laceration.,1
"An employee was helping two coworkers change a front end loader's bucket. His finger was in a pinhole when the locking pin actuated, partially amputating his left middle finger.",0
"An employee was driving a golf cart after loading it with firewood from a storage bin. While the cart was maneuvering in the tight space between the bin and a construction truck parked next to it, the employee's left leg was caught between the bin and the cart. The employee was hospitalized, suffering from swelling and laceration to the leg.",1
"An employee was working from a 12-foot step ladder (on the third rung from the top), reaching to clip a wire tie while he was roughing in a heating and air conditioning system. The ladder started to tip, and he jumped from it to avoid falling to the ground. He landed on his feet on the concrete floor, breaking his left heel in five places and his right heel in three places. He was hospitalized, requiring surgery.",1
"An employee was walking on an I-beam in the lay down area. The employee stepped down from the I-beam and another I-bean (approximately 3,200 lbs.) rolled over onto his ankles fracturing both ankles and the lower right leg.",1
An employee was attempting to stop a shoplifter who was pushing a cart of stolen merchandise out of the store. The employee's foot got caught in the cart and the employee fell fracturing his left foot.,1
"While walking near a loading dock, an employee was struck in the foot by a forklift truck. Her right leg was broken.",1
"On October 30, 2018, an employee was engaged in sanitation procedures and suffered amputations to four fingers on the right hand when his hand was caught in the serpentine chain located on the rollers between the coring machine and the trim table.",0
"A temporary employee was operating a baler when a box was caught in it. He attempted to free the box. His left foot was caught between the blades; four toes and part the big toe were amputated. He was hospitalized, needing surgery.",1
An employee was assisting a motorist on the side of the highway and was struck by another vehicle while standing at the back of the assist vehicle. The employee was crushed between the two vehicles and suffered a bilateral leg amputation.,1
The employee was a passenger on an ATV looking at a tract of lumber for purchase. The ATV rolled and the employee sustained an ankle fracture requiring hospitalization.,1
An employee was descending a step ladder and missed the last step. Her knee snapped and she was hospitalized for surgery.,1
An employee was installing light fixtures in a drop ceiling from an 8-foot step ladder. The employee slipped off the third rung while descending the ladder and fell to the ground. The employee suffered fractured vertebrae and was hospitalized.,1
"An employee was carrying a box and walking in a tool department when his right foot became caught on a display item and he fell to the ground. He suffered a fractured patella and was hospitalized, requiring surgery.",1
"As an employee turned to walk back into the store, he fell to the ground and fractured a hip.",1
An employee was cutting a piece of foam when his arm was trapped between the foam and the sawblade. He suffered a laceration on the inside of his right elbow and was hospitalized.,1
An employee tripped on a long tube that was resting on a pallet and fell breaking an arm.,1
An employee was reworking an automotive air conditioning hose and amputated the right index fingertip in the hose cutting machine.,0
"An employee was tightening a plate on a sauce chip tunnel machine when the plate moved (indexed), resulting in an amputation to the tip of the employee's right little finger. The machine was unguarded at the time of the incident.",0
"An employee was drilling a well. The employee's jacket was caught by the auger and the employee was pulled into the drill auger. The employee sustained a broken neck, shoulder, ankle and also internal injuries.",1
An employee was in a scissor lift troubleshooting a machine. The machine activated and the employee was pinned between the machine and the scissor lift railing resulting in six broken ribs.,1
An employee was dizzy and fell from the second floor.,1
An employee was cutting scrap logs with the swing saw and amputated the left index and middle fingers at the middle knuckles.,1
An employee tripped over a pallet of empty tubs and fell breaking a femur. The employee was hospitalized.,1
An employee's arm was caught in a hydraulic press while cleaning it resulting in two fractures in the arm and five fractures in the hand. The employee was hospitalized for surgery. The arm was later amputated below the elbow.,1
A stage hand tripped while rolling a box over a cable ramp and fell backwards striking her head. She was hospitalized for a skull fracture.,1
"An employee was lowering fins into a 95-degree-Celsius water bath, used to stretch fibers. A hole in the employee's left glove allowed water in, and the employee's hand was burned. The employee was hospitalized. Hot stretch gloves over cut-resistant gloves were being worn at the time of the incident.",1
An employee was using a grinder machine and while pushing down on a part amputated their right index fingertip.,0
"An employee was changing out vacuum switches on the third level in an electrical room. The employee fell through the space created by the removal of the switches, landing 7.5 feet below and suffering fractured neck vertebrae and a lacerated scalp.",1
"A crane operator had placed a steel mill beam into a staging area with an overhead crane and was removing the lifting chain. The mill beam (29.5 feet long, weighing 956 pounds) fell forward, striking the crane operator on his left leg. His lower left leg was broken, and he was hospitalized.",1
An employee was operating a microtome machine when it activated. Its blade cut off the tip of her finger.,0
"An employee suffered a self-inflected gunshot wound to his left thigh, when the firearm in his jacket pocket slipped out and fired.",1
"An employee was investigating smoke coming from a 55-gallon drum of resin sitting on a heated rack. After investigating the smoke, he began walking away from the drum; it ignited, producing a ball of fire. He suffered second- or third-degree burns to the right side of his face, back, arm, and knee area. He was hospitalized, requiring surgery.",1
"An employee was spotting for a track hoe when he was caught by the tracks, fracturing his right leg in three places.",1
An employee was trying to unclog an FCM machine when his hand was caught between the hydraulic jack and the machine. His left thumb was broken.,1
"An employee was installing tubing, joining connections onto structural beams. He was tied off to the beam he was trying to connect when one end of it came down, pulling him to the ground from about 15 feet up. He suffered a broken left femur and several cracked ribs and was hospitalized.",1
An employee was showing another employee how to run the portable lathe when their finger contacted the lathe resulting in surgical amputation of the left index finger at the first knuckle.,0
"An employee was carrying a plastic bag while walking when she stepped on the bag, fell to the floor, and fractured her right hip. She was hospitalized.",1
"In either pulling down an elevator door or installing a 5- to 10-pound vibrator on a carbon scale, an employee suffered an abdominal hernia.",1
"An employee was doing overhead piping work while using a manlift. The lift contacted hot water pipes that provided supply and return to a heater in a garage, causing the pipes to bow. When the lift was lowered, one of the pipes burst. The employee was burned with hot water from the pipe. He jumped approximately 10 feet from the lift to the ground and fractured his hip.",1
An employee was working at the furnace raking iron when a furnace tending machine pulled the employee into a beam causing a crushing injury to the employee's left hand.,1
"An employee was crimping the tops of flash bang grenades while they were on a lathe. The crimp is applied via a plunger that rolls the edges. The employee placed a flash bang grenade onto the lathe and engaged the jaws to hold it in place. While the employee was still holding the grenade, the pneumatic plunger engaged and struck the employee's index finger on his right hand, resulting in a finger amputation.",0
An employee was using a forklift to unload pallets. The forklift fell from the dock and the employee broke his left foot.,1
"At about 8:15 a.m. on October 31, 2018, an employee lifted a 5-pound fishing net and felt pain. The pain intensified and he was hospitalized.",1
"An employee was installing a seat on a tractor. While she was torqueing the seat base with a 90-degree torque gun, the rear of the tool rotated toward her in reverse. The tool and its battery struck her face, causing a dislocated jaw and torn ligaments requiring surgery.",1
"An employee fell off the lift gate of a van while moving a patient. She struck the ground and broke her knee, foot, and rib.",1
"An employee was kneeling in the street beside a curb, holding an expansion joint in place while concrete was being poured. As the concrete truck pulled forward, its passenger-side front tire ran over the employee's feet. The employee suffered a fracture in the right little toe, damage to blood vessels in the left foot, and lacerations requiring five stitches to the toes on the left foot.",1
"While installing decking, an employee fell from the decking and suffered a dislocated shoulder. The employee was tied off at the time.",1
An employee was overcome by carbon monoxide fumes while working on a truck tire in a garage. The employee was hospitalized.,1
"An employee was using an air-powered hand grinder when its disc broke apart, lacerating the employee's arm and face.",1
An employee's finger was pinched in the articulation where the fork on a truck went up and down. The finger required surgery.,1
A joint of pipe slipped through elevators and fell on an employee. He suffered head and arm injuries.,1
"At about 11:00 a.m. on October 31, 2018, an employee was carrying a bundle of rebar that was tied with wires. A wire popped and hit him in his safety glasses, lacerating his right eyelid.",1
An employee was standing on a flatbed trailer helping another driver secure a load on the trailer when he lost his grip on the load and fell approximately 3 to 4 feet off the trailer to the concrete. He fractured his left femur and left radius.,1
An employee was adjusting air nozzles on a grinder and removing jammed parts. His little finger was amputated between a part and the grinding wheel.,0
"An employee was scraping hot melted plastic from an extruder machine. The employee's putty knife penetrated a skin formed on the plastic; molten plastic sprayed onto the employee, causing burns to the face, torso, and left and right arms.",1
An employee tripped on a permanent fixture while stocking and injured the left knee requiring surgery.,1
"An employee was reaching for a part when his glove was caught by a CNC saw, causing a partial fingertip amputation.",0
"An employee fell approximately 15 to 16 feet off a scaffold to the wood sub-floor while preparing a ceiling for painting, suffering two broken wrists and a broken nose.",1
"An employee was standing in front of a warehouse office door when the employee was struck by a 10,790-pound forklift and pinned against a protective railing barrier. The employee suffered bruising and soreness of the right side of the body, both legs, and both knees, as well as trapped blood in the right leg muscle. The employee was later hospitalized with an infection and blood clotting.",1
"An employee was retrieving a tool from a ""chucker"" machine when it caused an amputation to his right index finger. The machine was not locked out at the time of the incident.",0
"A temporary employee was operating a chop saw when the saw blade cut the fingers on his right hand, resulting in a right pinky finger amputation.",0
"An employee was working on a piece of directional drilling equipment. Its fan blade lacerated the employee's right thumb, index, and middle fingers. The employee was hospitalized.",1
"An employee was putting a piece of metal into a shear press. The press activated, and his left hand was caught by the spring under the guard that automatically returned the press to its starting position. He sustained a partial fingertip amputation.",0
An employee was walking in the facility when a forklift ran over the employee's foot and broke it.,1
"A groundskeeper was cutting the base of a tree at a private residence. His chainsaw kicked back and struck both his legs, causing severe cuts above the knees. He was hospitalized. Personal protective equipment was not being worn at the time of the incident.",1
"Two employees were loading a dolly with metal frames. One was using a ""J"" bar to hold the frames in place while the other positioned the dolly. The frames hit the employee handling the ""J"" bar on the leg, fracturing the tibia and fibula.",1
"An employee had been dispatched to a store parking lot to tow a disabled vehicle. He parked the tow truck behind the vehicle, then laid on the ground and under the vehicle to hook it up to the tow truck. His legs were sticking out a little more than 1 foot from the side of the vehicle when a car drove over both of his feet, then went into reverse, drove over his left ankle, and parked on it. He was hospitalized.",1
"An employee was helping bring in a new fry hopper. While removing it, he tripped and it fell back on him, breaking his tibia.",1
"An employee was demolishing an abandoned pipeline in a trench, about 5 feet deep, using a demolition saw. He lost balance and the saw cut into his left forearm above the wrist, possibly cutting or nicking tendons. He was hospitalized.",1
An employee stepped on a recently poured concrete form and suffered a fractured right foot.,1
"An employee was feeding bars into a bar machine. While attempting to unjam the machine, the employee suffered an amputation to a finger.",0
"An employee was setting up a pressure washer to clean a roof. The employee was uncoiling the pressure washer hose when the employee fell through a skylight fixture and hit the ground, suffering a fractured left knee and left wrist.",1
"An employee was attempting to open a railcar coupler when the railcar ran over the employee's right leg below the knee, resulting in a right leg amputation.",1
An employee was hospitalized after falling off scaffolding.,1
"An employee fell while walking, suffering a hip injury.",1
"An employee was using a walkie-rider powered industrial truck to move pallets. The employee stopped the machine and stepped off the platform. The machine continued to roll and pinned his foot between the machine and a guardrail on the floor, breaking his ankle.",1
"An employee was operating a firewood cutting machine when it crushed the employee's hand, amputating two fingers.",1
"An employee was unloading furniture from a trailer when he was struck on the head by some stacked furniture, suffering a probable concussion.",1
"An employee was handling large glass when it fell, causing the employee serious abdominal wounds.",1
An employee was operating a press when the rollers caught the fingers of her left hand. She suffered crushing injuries to the fingers and was hospitalized.,1
"An employee was rolling a liquid gas cylinder from a lift gate to a gas supply room when he lost his footing and fell backwards. He reached up to regain his balance and pulled the cylinder over onto his leg, fracturing his tibia and fibula.",1
"An employee was using a remote-controlled crane to stage coil rolls for shipment. His right leg was pinned between two coils, causing a laceration to the knee and a fracture to the lower leg.",1
"An employee was gathering paper tube scrap. While he was grabbing a piece of the tubing from a drop table, the table caught his left middle finger as it opened, causing a (non-bone) fingertip amputation.",0
"An employee was stepping out of a tractor when he fell forward, striking his head on the pavement.  He suffered a gash on top of his head (requiring staples), swelling on his brain, a concussion, and memory problems.",1
An employee was picking up materials out of a hopper when a forklift operator moved forward and hit the employee. The employee was hospitalized with a partially collapsed lung.,1
"An employee was helping others open a retractable security fence gate. The gate's guide wheel caught his hand, breaking fingers and causing an amputation of the left ring finger above the knuckle.",1
"An employee had been watching the gears on the back side of a pleater, trying to determine what was causing a pleater to ""jump"" and not work properly. The cuff of her left glove was caught in the gears; as she tried to free it, the gears grabbed the tip of her right glove, pulling in her right index finger and causing an amputation to the finger. The machine was not guarded at the time.",1
"An employee was under a panel machine, clearing jammed wood. When the jam cleared, a chain caught his left middle finger, causing a partial amputation. The machine was guarded at the time of the incident, and was not locked/tagged out.",0
"On November 1, 2018, at 10:05 p.m., an employee in a lab was using a filter leak checker when his left index finger was caught between the bottom of the filter and the metal base of the machine, resulting in the removal of his fingernail and amputation of his fingertip.",0
An employee was hospitalized after experiencing an respiratory allergic reaction to a flu shot.,1
"An employee was unloading metal stock after it had been bent in a press brake. The employee was caught between the brake and the stock, suffering an amputation to the left middle fingertip.",0
"An employee was unloading doors from a box truck. A pallet of doors fell from the truck's tailgate, breaking the employee's pelvis.",1
"An employee was placing a pallet on the floor in the produce receiving department, tripped backwards over another pallet, and fell to the ground resulting in an open fracture to the right wrist.",1
"An employee was delivering a 75-inch TV in its box. He was carrying the boxed TV from the van when he lost his balance and fell on his left wrist onto a wooden crate, breaking the wrist. He was hospitalized.",1
"An employee was on a ladder installing fire dampers at a retail store when the employee fell from the ladder to the floor, sustaining a fracture to the right wrist and right pelvis.",1
"An employee was on a ladder using a wrench to remove brackets from a wash bay wall when the wrench slipped, causing the employee to lose balance and fall approximately 5 feet to the ground. The injured employee suffered a fractured hip.",1
"An employee was hit by a collapsing concrete boom truck, suffering trauma, a severed spine, and paralysis. The employee was hospitalized.",1
"An employee fell through a hole from the third floor to the second floor, landing on a concrete floor. The employee suffered broken ribs and a hip/pelvis fracture and was hospitalized.",1
"An employee poured a degreaser into a bucket to clean a floor. He added hot water, then started having breathing problems. He was hospitalized with chemical pneumonitis.",1
"An employee was preparing to perform a load test on a battery system. He was receiving directions over the phone from the lead supervising  technician. He and his co-worker were attempting to divide the 240-volt battery system into two 120-volt systems to perform the load test. His supervisor was directing them on where to divide the battery string. The system was then divided at cell 56 instead of cell 58. He was attempting to move the battery strap when the battery connector was placed on the terminal post, closing the 240-volt system. This created a short in the system, resulting in a DC arc flash that burned his left hand. Gloves were not worn at the time of the incident.",1
"While painting the inside of a walk-in freezer, an employee lost consciousness and fell to the floor, suffering a bump on the head.",1
"An employee tripped on cables and fell to the ground, suffering a hip fracture. The employee was hospitalized, requiring surgery.",1
"An employee was erecting steel in an elevator shaft. A winch was engaged while his hand was on a cable, and his fingers were pulled into the snatch block. His first two fingers were amputated.",0
An employee suffered a sprained ankle while stepping off a backhoe.,1
"An employee was making repairs to an overhead gantry crane when a second crane moved, pinning the employee's left foot against the rails. The employee suffered a lacerated heel and was hospitalized.",1
"A flaker operator was trying to unplug a flaker's conveyor belt in order to clean up excess bark with a rake. He lost his balance and fell onto the bark accumulation belt's crossbar, suffering five broken ribs. He was hospitalized.",1
"An employee fell from a trailer while using a pry bar at a construction site. The employee suffered a broken right wrist and elbow, bruised ribs and chest and road rash on the left side of the face.",1
"An employee slipped and fell to a wet floor, suffering a head injury.",1
"An employee was climbing a ladder to stock shelves when he lost consciousness, falling to the concrete floor and suffering internal bleeding.",1
An employee was pulling crates off a cooling line when a crate hung up on the line and fell onto the employee's foot. The employee's right big toe was fractured.,1
An employee was parking a golf cart when it went over a 4-foot retention wall. The employee suffered head trauma and bruising to the buttocks.,1
"An employee was pushing a loaded pallet to the end of a conveyor at a press. The employee noticed a plastic pad lying in front of the pallet and was removing it when the pallet, still rolling, pinched the employee's right ring finger against the metal conveyor end stop amputating it.",0
"An employee was doing a routine equipment check when hot condensate leaked from a steam drum onto his back and shoulder, causing first- and second-degree burns.",1
"An employee fell from an A-frame ladder to the floor, suffering a skull fracture.",1
"An employee was assaulted and robbed in a parking lot, suffering a concussion.",1
An employee was building wooden forms using a staple gun. The gun shot a staple into the back of his left hand. He was hospitalized for surgery to remove the staple.,1
"An employee was performing a quality test on some small pipes and was putting the tubes in a hydraulic ram press. A three-inch disc was projected from the press, lacerating and injuring the employee's head. The employee was hospitalized.",1
An employee's shirt was caught in the chain of a conveyor belt; the employee's arm was dragged into the conveyor and crushed/lacerated.,1
An employee was using a chop saw when it cut off his left thumb.,1
"An employee was using an air nozzle to clean a dual-head table router. The router's blade hit the employee's right thumb, lacerating it.",1
"A forklift struck an employee, breaking his leg.",1
"An employee was working in a warehouse. A forklift pushed a load forward and the employee was trapped between the load and another forklift, suffering a fractured right foot and a dislocated toe.",1
"An employee was wrapping a pallet with plastic wrap. The plastic wrap ripped and the employee fell backward, striking his head on a rack. He suffered a head injury.",1
"At about 9:40 a.m. on November 2, 2018, an employee was reinstalling a chain onto a heat transfer sublimator's sprocket. The employee's left index finger was caught between the chain and the rotating gear, causing an amputation to the fingertip.",0
An employee had just filled the slug pot and lost balance while descending from the 2-step platform. The employee fell and broke their left arm.,1
"Two sliding glass doors caught an employee's finger as they closed, causing an amputation.",0
"An employee was helping repair a gate when its pulley rolled onto his right hand. His middle finger was caught between the pulley and the road, and the tip was amputated.",0
"An employee was on the back of a trailer (about 3 or 4 feet off the ground), loading pieces of a roller coaster. The releasing ratchet strap holding the equipment in place slipped; the employee fell, landing on a piece of the roller coaster's track and suffering two broken ribs and a collapsed lung.",1
"An employee was flagging traffic in a highway work zone. A car struck the employee, who traveled an estimated 90 feet before landing. The employee suffered broken legs and back and head injuries, with multiple lacerations.",1
"An employee was adjusting his lanyard to get more slack so he could move to a different part of the roof he was working on. He slipped and fell 8 feet from the leading edge of the roof to the ground, breaking his arm. He was hospitalized.",1
"An employee was rigging a 6-foot bundle of steel to be hoisted off a roof, approximately 105 feet high, with a crane. When the crane lifted the bundle off the roof, the employee's hand was caught in the wire rope sling. He suffered an amputation to the left index finger.",0
"A heavy tree branch was cut down, striking an employee who was walking below. He suffered a fractured pelvis and fractures to the thoracic spine.",1
"An employee was working in a poly wrap area, taping pipes, when his shirt was caught on a conveyor.",1
An employee slipped on uneven terrain and fell to the ground. The employee suffered bulging discs.,1
"An employee was trying to remove a scrap wrapper box from below a forming section. A chain and sprocket caught the tip of the employee's left middle finger, causing an amputation to the fingertip.",0
"An equipment delivery driver was lowering coolers using a lift gate. He lost his balance and fell backwards from the lift gate to the ground about 3 or 4 feet below, suffering lacerations to the back and front of his head. He was hospitalized.",1
An employee was disassembling an electric pump when his left ring finger was caught between the shaft and the diffuser. The finger was amputated to the first knuckle.,1
"An employee was operating a car wash when she lost consciousness and fell to the floor. She struck the back of her head on the floor, suffering a closed fracture of the occipital bone.",1
"An employee tripped and fell on her back, suffering a broken bone in her neck, a stroke, and a blood clot.",1
"An employee was dragging tree limbs alongside a truck. He tripped on a culvert and fell against it, suffering two broken ribs on his right side. He was hospitalized.",1
"An employee was driving a maintenance cart in a warehouse. His left leg struck a steel racking system, and the lower leg was broken. He was hospitalized.",1
"An employee was descending an 8-foot stepladder when it twisted, causing the employee to fall. The employee suffered a contusion to the left leg.",1
"An employee stepped on a pallet, lost her footing, and fell over, suffering a fractured ankle that required surgery.",1
"An employee was working with a plant component that was being released from tension. The component struck the employee, causing a fractured cheekbone, right wrist, and four ribs.",1
"An employee was driving a stand-up forklift when it struck another, parked forklift. The employee's left arm was caught between the two pieces of equipment, suffering a contusion.",1
"While helping a coworker perform hydroblasting, an employee was struck in both shins by the high-pressure water stream.",1
"An employee was placing a bed sheet in a laundry compressor. Her right hand was caught in the compressor's rollers, and her right forearm and hand were amputated.",1
"An employee welded an ISC spool on a payoff to reconnect the wire. After completing this task, the employee went to the control panel and pressed the start button to begin running the machine. While the machine was running, the employee noticed a loop was in the loose wire on the payoff spool and attempted to twist the loop before the wire closed on the spool, which would have made an ""eye"" in the wire. This would have created a snarl and caused the machine to stop. The employee was attempting to get the loop twisted out when the wire closed down on the spool with his fingers in between. The fingers (index, middle and ring) of the right hand were pinched between the wire, resulting in a partial amputation of the index finger to the second joint, middle finger to the second joint, and ring finger to the first joint.",1
"An employee slipped in an attic and fell through the ceiling, suffering upper body bruises.",1
"An employee was entering the building from a lunch break and slipped and fell in the vestibule, fracturing his L1 vertebra. It was raining at the time of the incident and the employee's shoes were wet.",1
An employee was cleaning a drain when her left hand came into contact with a running riser auger. Four of her fingers were amputated.,1
"An employee fell from the second level to the first level in a mushroom house, suffering a broken tibia.",1
"While moving to a different position on a production line, an employee tripped over a yarn bale and fell to the ground, suffering a broken right hip.",1
An employee was de-wiring bales of pulp when a forklift (which was bringing him more bales) dropped a bale onto his leg. He suffered a compound fracture of the leg and was hospitalized.,1
"An employee was cutting 3-inch copper pipe, locked in a tripod vise, with a portable bandsaw. While he was controlling the saw with his right hand and supporting the end section to be cut with his left, his glove caught on the blade and pulled the end of his fourth finger into the running blade. The fingertip was amputated, and he was hospitalized.",0
"An employee fell through a floor hole, suffering a fractured vertebra. The employee was hospitalized.",1
An employee was reaching between a semi-trailer and a semi-trailer lift to retrieve tail-light wires when the lift operator activated the lift. The employee's hand was then crushed between the lift and the semi-trailer.,1
"On November 4, 2018, an employee slipped on a tree root, falling and suffering a broken arm.",1
"A super sack full of pellets fell onto an employee's right leg, breaking it about 3 inches below the knee. The employee was hospitalized.",1
An employee was preparing to cut lumber with a saw. The saw energized while his left hand was on top of the lumber; four of his fingers were amputated.,1
"An employee was opening a tank lid from a ladder, about 3 to 4 feet off the ground. The ladder slipped out from under him and he fell to the ground, breaking his leg. He was hospitalized.",1
"An employee was standing on a stepladder in a car wash tunnel, wiping down a stainless steel structure and air cylinder with a cloth. The passenger-side grill brush came into contact with the employee's ladder as it pulled away from a vehicle, throwing him to the ground. He landed on his left side and suffered lacerations to the spleen. He was hospitalized.",1
"At 2:39 p.m. on November 5, 2018, an employee was putting a metal storm drain grate (which had been removed for cleaning) back in place. It pinched a finger on his right hand, causing an amputation that left bone visible. He was hospitalized and underwent surgery.",1
"An employee was trying to chunk a box elder tree when a dead limb, about 3 inches thick and 5 feet long, struck him in the face. He suffered forehead, nose, and eye area injuries.",1
"While removing a tree branch from the edge of a one-story-high roof, an employee fell through a skylight to the concrete floor. The employee suffered fractured ribs, a lacerated liver, and a broken wrist.",1
An employee was unloading fertilizer from the cargo hold on a vessel. The employee was standing next to the hauling bucket when the load was grabbed. The employee's leg was pinned between the hauling bucket and the cargo hold wall. The employee suffered crushing injuries and fracture to the lower right leg.,1
"While bending over to pick up a tool, an employee heard a pop in his lower back. He felt pain as he tried to straighten up.",1
"An employee's right glove was caught by a rotating tube in a tube straightener. The employee's hand was pulled into the roller, causing an amputation of the right ring finger.",1
"An employee was operating a road roller when it rolled down an embankment and tipped over, throwing him to the ground. His left hand was broken and he was hospitalized, requiring surgery.",1
"An employee was trying to push something off the auger in a fresh mozzarella mixer. The machine cycled, causing a partial amputation of the employee's left index fingertip.",0
"A sewage transfer pump had been installed on a vessel; during the testing and jogging phase of the installation, the pump was engaged. A mechanic's hand was caught in the drive belt/pulley, and his left middle finger was amputated.",1
"An employee was struck by a forklift as it backed up. The employee fell backward and hit their head on the warehouse floor, suffering a small brain bleed, a fracture to the back of the skull, bruising of the left eye, and a small left cheek laceration.",1
An employee was struck by a tugger after its operator dismounted. The employee's leg was broken.,1
"An employee was trying to remove a breaker plate from an extrusion machine. A piece of metal flew off, striking and lacerating the employee's neck.",1
"An employee was repairing an excavator arm when it fell out of its sling, amputating the employee's index finger.",0
An employee's arm was pulled into a moving conveyor on a recycling sort line. The employee's left ulna was broken.,1
"An employee was driving a powered pallet truck when it veered left toward a rack. The employee jumped off; the pallet truck continued to move forward and struck the employee's right foot, causing multiple deep lacerations.",1
An employee was cutting window muntins with a chop saw. The saw cut off the tip of the employee's left index finger.,1
"An employee was running a chamfer machine when a board got stuck. While the employee was attempting to unjam it, the employee's finger was pinched between the machine and the board, causing an amputation to the fingertip.",0
"An employee was setting up a press brake when it cycled. The die came down on the employee's fingers, causing an amputation.",0
"An employee was using a food slicer to cut onions. The slicer amputated a small portion of the employee's left index fingertip. The guard on the slicer was not on, and a glove was not being worn.",0
"An employee was pulling serial numbers off a hydraulic valve. The strap that was being used to hold the valve snapped and the valve fell, pinning the employee against a forklift. The employee suffered broken ribs and was hospitalized.",1
"An employee was repairing/removing a gantry arm on a finishing line. An I-beam dropped, crushing and fracturing the employee's hand against a fixed structure.",1
"An employee was on a palletizer when it fell on top of him, resulting in a cut to the head and a broken jaw.",1
"An employee tripped and fell while entering a store from a parking lot. She fell, breaking her right leg.",1
An employee was using a circular saw to cut a board. The saw cut two of the employee's fingers off.,0
A slitter operator was removing a piece of plastic that had fallen when the slitter machine was activated. It amputated the tip of the employee's finger.,0
"On November 5, 2018, an employee was placing scrap metal onto a trailer when the load began to shift and the employee dismounted from the trailer. A few pieces of steel slid from the trailer and onto the employee's right leg, fracturing the tibia and fibula. The employee was hospitalized and had surgery.",1
"A truck pulled under a conveyor system (being used to remove dirt that had been excavated from an interior courtyard). The truck's canopy roller struck the conveyor, moving it forward and causing it to strike a nearby employee and break three of his ribs. The employee was hospitalized.",1
An employee was trying to unjam a four-saw edger machine. The employee's right arm was caught in the machine and amputated at the shoulder.,0
"An employee's feet fell through the grate covering a pit, coming into contact with an auger in the pit. The employee suffered amputations to multiple toes on the left foot.",1
"On November 5, 2018, a painter was cutting in the paint from a wall to a ceiling, working from a scaffold 6 feet high. The employee fell from the scaffold, landing on the concrete floor below and suffering fractures to both wrists and a fractured skull. The employee was hospitalized.",1
"A roofer was on a one-tier rolling scaffold, applying lateral pressure to metal roof sheeting. The scaffold fell over and the employee struck the pavement, suffering a bruised right elbow and a fractured vertebra and needing stitches to the head.",1
"On November 4, 2018, an employee was standing on the loading dock, helping dump 50-pound bags of salt into a salt hopper. The employee lost balance and fell about 6 feet to the ground, suffering four fractured ribs, then a collapsed lung. The employee was hospitalized.",1
An employee was installing a metal roof and fell 8 feet from a ladder onto a concrete sidewalk. The employee sustained a concussion and a bruised elbow and knee.,1
"While helping offload concrete traffic barriers at a construction site, two employees were struck by a flatbed truck as it backed up. One of them suffered a broken right foot and ankle and was hospitalized, undergoing surgery.",1
"While hanging doors, an employee fell from a fourth-story balcony, landing on the ground 40 feet below. The employee suffered a fractured right wrist and a contusion to the lower back.",1
An employee was helping close a fence when his finger was caught between the fence's top horizontal post and its metal guide roller. The tip was amputated.,0
"An employee was working on top of a ladder when it shifted, causing the employee to fall approximately 15 feet to the ground. The employee sustained a spiral fracture to the right femur. The employee's safety gear was unclipped at the time of the incident.",1
"While installing lights, an employee fell from a ladder to the floor and suffered a fracture to the left femur.",1
"An employee was on the third step of an A-frame 6-foot ladder in the galley kitchen removing a long fluorescent light cover when he lost his balance and fell on a 30-inch-tall, 30-inch-wide steam kettle that was half full of 200 degree Fahrenheit water. This resulted in second and third degree burns to his right calf and right lower part of his arm and hand. He was hospitalized.",1
An employee was driving a stand-up forklift in reverse toward trash compactors when the forklift crushed her foot.,1
"On November 6, 2018, at 1:30 p.m., an employee incurred an amputation of the tip of his left thumb when his hand was caught between two print-down sections on a flexo-gluer-folder machine as he was closing the sections.",0
"An employee was assisting a press brake operator. The employee's hand was in the point of operation when the press brake actuated, resulting in the amputation of four fingers on the left hand.",0
"An employee was using a chainsaw to cut a tree limb when it became wedged in the limb. A coworker used his chainsaw to cut part of the limb to relieve pressure on the chainsaw. As the employee was retrieving his chainsaw, he moved in the direction of his coworker and his left pinky came in contact with his coworker's chainsaw blade. His left pinky finger had to be medically amputated.",0
"A bolt sheared in the middle of a 3-ton feed mixer. An employee was attempting to align the hole with a punch while another employee hit the switch on and off.  This on/off action pulled the first employee down into the feed mixer. The employee was hospitalized with a broken right shoulder and arm, fractures on the right side of the face, and head lacerations on the right side that required stitches.",1
An employee was about to clamp a small part into a horizontal bandsaw when the hydraulic clamp smashed his fingers. He suffered partial amputations to his left index and middle fingers.,0
"An employee was standing on a truck bed, positioning bundles that were being loaded onto the truck by an overhead crane. The crane lifted a bundle on the truck and it struck the employee, breaking his left femur.",1
"A pre-framed interior wall fell over and struck an employee, resulting in cracked vertebrae.",1
"On November 6, 2018, after spending about 45 minutes unloading cardboard boxes containing chocolate packed with dry ice from a trailer, an employee became ill, vomited, left the trailer, and lost consciousness. Suffering from carbon dioxide intoxication, the employee was hospitalized.",1
"An employee was standing inside the building looking out a window on the garage door. The employee knocked on the window to get the attention of employees outside. One employee that was outside knocked on the glass in response. The window shattered and the injured employee had shards of glass enter his eye, resulting in the probable loss of the eye.",1
"While operating a guillotine blade cutter on the mixing line, an employee received an injury resulting in the amputation of the ring and pinky fingertips. The middle finger was also crushed.",1
"An employee became ill while running on a treadmill during his annual physical. Suffering from a fast heart rate and high blood pressure, he was hospitalized.",1
"An employee slipped and fell while opening a door, suffering a broken left femur.",1
An employee felt sick (suffering from heat stress and dehydration/malnutrition) at the end of the work day.,1
An employee was removing rigging hooks and chains from a concrete storm drain that was being hoisted into a trench when his hand was caught between the hook and the concrete structure. His hand was fractured and lacerated.,1
An employee sustained a broken nose after being struck in the face by a tablet computer that fell from a residential roof.,1
A backhoe was removing tub and frame forms from a new drill pier foundation. An employee got his right index finger caught between the hoisting chain and the bucket of the backhoe resulting in an amputation.,1
An employee was using a mechanical vegetable slicer to cut squash. Her left hand slipped during the process resulting in the amputation of her left middle fingertip.,0
"An employee's finger was caught between the operators handle of a pallet jack and the VRC gate, resulting in a left fingertip amputation.",0
An employee was on break walking around the building when a truck drove through the parking lot with lights off and hit her. She suffered pelvic and shoulder fractures.,1
A temporary employee was moving pallets using a powered industrial truck. The truck went out of control and her lower left leg was broken.,1
"An employee was performing maintenance on a semi truck on the side of the road. Another semi truck struck the one he was working on, and his right leg was broken. He was hospitalized.",1
"While closing a roll-up door, an employee tripped and fell onto his shoulder and hip, fracturing his clavicle and pelvis.",1
"An employee was training on a pallet jack. While reversing, he struck a parked pallet jack and sustained a foot laceration.",1
"An employee sustained a fractured leg after being caught between a concrete wall and a front-end loader, resulting in hospitalization.",1
"A chain on a tote machine amputated the tip of an employee's right index finger, below the nail bed.",0
"An employee tossed a dirt clod at the injured employee, who lost his balance, fell to the ground, and fractured his right arm while trying to break his fall.",1
"On 11/06/2018, at 10:17 a.m., an employee was in a golf cart spraying the lawn in the median when a truck struck the golf cart. The golf cart was on the roadway. The employee sustained injuries to his pelvis, spine and ribs, as well as lacerations, requiring hospitalization.",1
An employee was attempting to remove a slab of wood from a conveyor line that had hung up on a metal chute. His right hand was caught between the slab of wood and the metal chute causing fractures to the right hand and fingers.,1
"An employee was using a load brindle to load a truck. The truck rolled backward, pinning the employee against the load. She suffered a partial collapsed lung and was hospitalized.",1
"An employee was walking, tripped over a root and fell resulting in a kidney injury.",1
"An employee was reaching for a roll of masking tape when he slipped on an aircraft stairway and fell to the concrete ground, fracturing his left arm. He was hospitalized and had surgery.",1
"An employee came into contact with a 5 kV power line and sustained an electric shock, requiring hospitalization.",1
An employee developed an MRSA infection and was hospitalized.,1
"An employee was operating a shear when it came down on the employee's fingers, resulting in amputations to the left index and ring fingers. The guard was in the up position at the time of the incident.",1
"An employee was walking downstairs when he lost his footing on the last step. He fell into the guardrail, suffering two fractured ribs and a kidney laceration.",1
"An employee was operating a pallet jack and as he was crossing a threshold, he lost control and the jack struck his left foot, fracturing toes.",1
A forklift operator was attempting to make a three-point turn after backing up from an aisle. An employee had their back towards the reversing forklift and was struck. The employee's foot was caught in the forklift's wheel well resulting in a fractured ankle.,1
An employee was removing a 200-pound paper roll from a bar on a press. His middle finger was caught between the plate on the side of the machine and the bar. The finger was crushed and had to be amputated.,0
"An employee was cutting wood with a table saw when the blade touched his hand, causing the amputation of his right middle finger.",0
"An employee was unloading a piece of machinery (approximately 800 lbs.) down a ramp with the assistance of other employees. The employee's foot became lodged in the mud and he could not get out of the way when the machine came down the ramp. The machine then hit the employee resulting in a broken right leg and ankle, requiring hospitalization.",1
"An employee was stocking shelves from a ladder and fell from the ladder to the floor, injuring their head, neck, and spine.",1
"On November 6, 2018, an employee was delivering parts to a store and slipped from stairs resulting in hospitalization for head trauma.",1
An employee was adjusting a part of the pneumatic tool on a piece of equipment when his left index finger was caught by the tool and amputated.,1
"An employee was conducting off-road, nighttime motorcycle training. The employee's motorcycle struck a tree stump along a trail, and the employee's right foot was broken.",1
"An employee was walking by a transfer conveyor located at about knee level that moves dimensional lumber into a sorting and stacking machine when he noticed that a board was stuck on the conveyor. As he attempted to unjam it, a running chain and sprocket power transmission apparatus caught his right middle finger, resulting in an amputation at the middle knuckle. The conveyor was guarded at the time of the incident.",0
"An employee was raising a lift gate while standing on it with a hand cart. The hand cart moved, and when the employee attempted to retrieve it, the employee's right foot was smashed in the lift gate. The employee suffered dislocated or fractured toes on the right foot.",1
"On November 7, 2018, an employee stepped on a wire that cut his toe.",1
"An employee was carrying a floor truss across other set trusses when the truss he stepped on broke and he fell 9 feet to the floor, fracturing his ribs and shoulder.",1
"An employee was lifting metal coils via a crane and attachment when the employee's hand was pinched between a metal coil and coil lifting device, resulting in an amputation to the left pinky finger.",0
"An employee was helping a delivery driver offload equipment from an 18-wheeler trailer. He fell from the trailer to the ground about 3 feet below, suffering a head laceration (which required sutures) and a broken left third rib. He was hospitalized.",1
"On November 7, 2018, a quality technician was providing training to one of the departments and was speaking to a co-worker while by her desk. Her foot got wedged in the lower opening of a metal skid that normally holds layers of gum. This caused her to lose balance and fall over causing a closed fracture of the left ankle.",1
"An employee was on a roof, hanging Christmas lights along the edge. He fell off the edge, landing about 9 1/2 feet below with his heels on the edge of the sidewalk and the fronts of his feet in the grass. He suffered two fractured heels and, possibly, fractures to the left tibia and fibula. Fall protection was not being worn at the time of the incident.",1
"An employee operating a stand-on motorized pallet jack got his left leg and foot caught between the pallet jack and the platform of a machine that he was delivering materials to. The employee sustained a fractured tibia, fibula and ankle.",1
"An employee was climbing an A-frame ladder to read the meter on the outside of a business facility when he fell off the ladder to the ground, fracturing his left ankle.",1
"An employee was pushing a wood rail through the blade of a table saw when the rail broke, causing the employee's right index finger to contact the saw blade.",0
An employee was climbing a ladder with a pneumatic nail gun. The nail gun actuated and sent a nail through his knee.,1
"An employee was using a rag to clean the paddles on a machine. The machine caught the rag, pulling the employee's hand in; the employee's left middle finger became wedged against the hopper wall and the blade on the rotating conveyor. The finger was amputated up to the second knuckle, and the employee was hospitalized.",1
"An employee was pulling orders from warehouse shelving when a forklift ran over her foot, causing a sprained left ankle.",1
"An employee was taking down a shore post for deck forming. After removing the pin from the shore post, he put his left hand on the top portion of the post and his right middle finger in one of the adjustment holes for the pin. When he proceeded to remove the shore post, it slid down and his middle finger was caught between the adjustable top slide and the adjustment hole itself, lacerating the very tip of his middle finger and resulting in an amputation.",0
"An employee was standing next to a bulldozer when its blade was set down on his foot, causing two fractures. He was hospitalized.",1
"At about 4:10 p.m. on November 7, 2018, an employee was operating a foot-pedal-activated riveting machine. The employee's left thumb accessed the point-of-operation during a riveting cycle, and a rivet (along with the employee's glove) was embedded in the  thumb.",1
"An employee was participating in a coiled pipe cutting activity when the piece being cut sprung loose and hit the employee, fracturing several vertebrae in his back.",1
"An employee was moving a forming mold when it slid off its blocks and crushed the employee's left middle fingertip, resulting in a medical amputation of the finger.",0
An employee was running a meat mixing machine when his right index and middle fingers were amputated.,1
"An employee was racking drill pipe from a derrick mans platform into a drill rack when a pipe likely swung at the top and struck the employee's head, resulting in a fractured skull.",1
"On November 7, 2018, at approximately 6:15 p.m., an employee was working with a coworker to troubleshoot a counterbalanced forklift. The employees were working on the engine, but immediately prior to the accident had trouble getting the transmission to disengage. They were standing opposite of each other on either side of the forklift with one hand on the ignition switch key and the other in the engine compartment. The forklift's transmission was left in gear and safety switch was disconnected or otherwise not functional to prevent unexpected startup and rolling. Suddenly, the forklift started to roll a few feet and struck a nearby feeder machine staged on saw horses that had some plastic and aluminum material placed on it. Upon impact, that material shifted counterclockwise and struck the injured employee, crushing and pinning him against the forklift. He suffered a fractured pelvis.",1
An employee was adjusting the outboard stand of a tube mill. The crow bar slipped and the employee fell backwards into the machine behind it resulting in a bruised lung.,1
"An employee was stepping out onto a 12-foot-wide, 6-foot-deep wood platform raised to a third-story window opening with a telescoping boom forklift. The platform flipped off the side of the forks and the employee fell about 24 feet to the ground below. The employee suffered a fractured neck vertebra and was hospitalized.",1
"An employee was putting freight away and was cutting open zip ties with a knife. He missed the package and the knife hit his arm, resulting in a large laceration to his left wrist. He was hospitalized and had surgery.",1
An employee was training on a forklift when it struck a column. The employee's left foot was broken.,1
"An employee was walking when she felt pain and fell to the floor, breaking her left femur.",1
"An employee was laying a cement block on the second floor balcony of a new residential building. At the same time, a crane was hoisting a pallet on the eighth floor when a cement block unit fell from the pallet and struck the employee on the balcony. This knocked the employee from the balcony to the ground floor below. The employee suffered a fractured clavicle.",1
"On 11/7/2018, at approximately 8:45 AM CT, an employee was installing a polymer bell and a shackle between an eye bolt inserted through a pole and energized conductor. He made contact with the hoist that was attached to the energized conductor while attempting to push a cotter pin through the shackle pin. The contact with the hoist caused a phase-to-ground incident, electric shocking the employee. Gloves were not worn at the time.",1
"An employee released the top clamps holding the central arm of a weld fixture in place. The arm was under pressure, and it swung down quickly. The employee jumped out of the way and twisted his right knee, causing a fracture just below the knee.",1
"An employee was observing as a crew spooled up a quarter-mile of 3-inch poly pipe. The tail end of the pipe caught on a bush and the middle section pulled inward, knocking the employee to the ground and breaking his right arm and leg. He was hospitalized.",1
"The injured employee was using a chalk line to mark the location of conduit under the roof membrane. The employee slipped on standing water/ice that was near the flag line and fell towards the warning line system. As the employee tried to catch himself, he fell approximately 17 feet off the roof to the ground below. The employee suffered a left hip fracture and lower lumbar fractures (L3 and L4 vertebrae).",1
"Upon turning to exit a van, an employee missed the bumper he intended on using as a step and fell approximately 42"" to the ground below fracturing two bones in his lower leg.",1
"An employee had just cut the last metal band from a bundle of steel tubes that had been placed on top of another bundle of steel tubes. Both bundles collapsed toward his right leg, causing blunt trauma and a possible broken tibia.",1
"An employee was collapsing a set of stairs. The stairs caught the employee's left middle fingertip, cutting it. The employee was hospitalized and underwent surgery.",1
"An employee fell to the floor while walking, fracturing her left femur.",1
"An employee was reroofing a two-story condo complex. While reaching to access a ladder, the employee slipped on debris and fell 18 feet, landing on the ground and coming into contact with a bush. The employee suffered cuts on the eyebrow and lips, a minor fracture of the eyebrow, and a suspected concussion. Fall protection was not being worn at the time of the incident.",1
An employee was closing an access door at the bottom of a spray dryer when a rotary valve partially amputated three fingers on his left hand.,1
"An employee was walking along the ridge of a roof when he slipped and fell approximately 10 feet and landed on a concrete patio.  He sustained broken bones in both legs and ankles, requiring hospitalization.",1
"An employee was putting a skid around a 24-inch pipe, which was in a sling attached to a crane. The crane raised the sling and the employee's right leg was broken between two sections of the pipe.",1
"An employee was using a manual lathe to remove Teflon coating from a 5-inch steel pipe. When the machine was turned on, an unsecured pipe broke the employee's left hand, necessitating surgery.",1
An employee was pulling laundry out of a washer when she heard a pop in her left arm. She had suffered a strain or tear in the arm.,1
"An employee's foot turned in a rut in the ground, and the employee's ankle was broken.",1
"An employee was sitting at a desk in a chair when she stood up and her foot became caught on the strap of her bag. She lost her balance and fell directly onto the floor, breaking her left femur and requiring surgery.",1
An employee was working with an augerbore pipe. His skin contacted concrete and he suffered chemical burns. He was hospitalized.,1
"On November 8, 2018, an employee was sanitizing a 4-by-4 bucket. The bucket hit the employee in the head, causing a brain bleed that required hospitalization.",1
A temporary employee was moving aluminum extrusions to a saw area. The blade of a radial arm saw cut his left index finger. He was hospitalized.,1
"An employee was changing out the blade of a gang rip saw. As the arbor/blade assembly was set on the saw's spindle it lacerated the employee's left forearm, right palm, and right little finger.",1
"An employee stepped into a hot water trench, burning his left foot. He was hospitalized.",1
"An employee was trying to remove a wheel from a rear wheel manipulator. The air cylinder holding pressure to the wheel became stuck. The employee worked to remove the wheel while the power was off; it was then turned on, and the employee's left little finger was amputated to the first knuckle. The machine was not locked/tagged out at the time of the incident.",0
"An employee had positioned a jack under a steel casing and was hand-pumping it when it slipped. It struck him in the forehead, cutting him and fracturing his skull.",1
An employee was cleaning a cement mixer when his right leg was caught in the mixer paddles. His right leg was broken and his left knee was lacerated.,1
An employee was troubleshooting a meat forming machine when the sensor tripped and the machine caught his hand. His right ring finger was injured.,1
"An employee was removing a piece of material from an airlock when the blades amputated the tip and fingernail of his right middle finger. The airlock had been locked out, but then reenergized, before the incident.",0
An employee was removing the guard from a driven roller assembly (to see why the roller was not operating) when his right index finger was caught between the drive belt and the pulley. The finger was amputated just below the nail line; he also suffered a small laceration to the right middle finger. The machine was not locked out at the time of the incident.,0
An employee was inspecting a conveyor belt when his right sleeve wrapped around a horizontal rotating shaft. He suffered a fracture to the right forearm.,1
"An employee was on a mezzanine to start to dismantle it. He was in the process of moving a piece of plywood that had been installed to cover an opening in the mezzanine where an exhaust stack had been previously installed. While in the process of removing the plywood, he lost his footing and fell approximately 9 feet to the concrete floor below, suffering a fractured elbow and leg, as well as a cracked pelvis and hip.",1
"An employee was removing accumulated metal from an overflow trough with a metal lancing rod. The rod became separated from the holder, and oxygen accumulated in the lancing tube and ignited. The employee's left palm received a second-degree burn.",1
An employee was hit by a car while walking in a parking lot. The employee suffered an arm/wrist injury and was hospitalized.,1
"An employee was in a walk-in refrigerator when she tripped on the wheel of a rolling cart. She fell on the stainless steel floor, hitting her face. She suffered a suspected broken nose and bleeding on the brain, as well as a possible concussion; she was hospitalized.",1
An employee was cutting and applying plastic wrap when acid from a leaking battery on a pallet splashed into his eyes.,1
An employee was troubleshooting an edge bander machine when his right little finger was caught in the machine. The fingertip was amputated.,1
"An employee was trying to bend the top rail of a rig mat frame using a pry bar so that he could install a filler block. While his right foot was inside the frame of the rig mat for leverage, the bar slipped, and the momentum caused him to fall to the ground with his foot still in the rig mat frame. His leg was broken above the ankle. He was hospitalized for surgery on his right leg.",1
An employee was cutting a 2-by-4 with a radial arm saw. The saw amputated his left index finger.,0
"An employee was walking by a lower pulley that had a wire rope running through two large pulleys when he slipped and grabbed the wire rope to keep himself from falling. His fingers were then pulled into the rotating pulley, resulting in the partial amputation of three fingers.",0
"An employee was preparing to perform preventive maintenance on an air handler. The air handler had not come to a full stop when he lost his balance and went to hold onto the machine. Three of his fingers were caught between the belt and the pulley, resulting in avulsions.",1
Two employees were engaged in horseplay when they fell to the floor. One broke his leg and knee.,1
"An employee was unloading a truck for delivery when a bed rail fell on the employee's finger, resulting in a right index fingertip amputation.",0
An employee was descending a ladder. The employee's foot caught on a ladder-up device and the employee fell 18 feet to the ground below. The employee suffered a broken pelvis and fingers and was hospitalized.,1
"At 11:00 a.m. on November 8, 2018, an employee was feeding an HDPE plastic lumber panel into a self-feeding table saw. The scrap piece being cut off the panel kicked back at the employee, striking him in the hand and chest and breaking his left ring finger. He was hospitalized.",1
An employee was chasing a student to stop him from going through a fire exit. She turned and broke her ankle.,1
"An employee was assembling a large fan when his glove was caught in the sheave of the fan as he manually turned the drive. The tip of his left middle finger was crushed, necessitating a surgical amputation up to the knuckle.",0
"An employee was beveling a pipe flange with a compact router. The router's bit jammed and struck the employee on the right hand, lacerating it.",1
"An employee was using a 5,000 psi high-pressure washer. The water stream penetrated his steel-toed rubber boot, cutting the top of his foot.",1
"At about 11:53 p.m., an employee was driving on patrol when his vehicle struck a pole at 15 MPH. The employee seems to be paralyzed from the neck down.",1
"An employee was using a cut-off wheel to cut off the bolt suspension of a customer's vehicle when it shattered, causing a laceration to his left arm. Wheel fragments became embedded in the wound, requiring hospitalization.",1
"An employee was cutting a round steak with a vertical meat band saw. The meat slipped, and the blade amputated the employee's left thumb.",0
"An employee was operating a saw when his right index finger came into contact with the blade, causing a laceration to the finger that resulted in an amputation.",0
"An employee was cleaning a press roller with ink buildup when his right thumb was caught between two rollers, resulting in a partial amputation of the thumb tip. The pinch point was not locked out at the time of the incident.",1
"An employee was pouring UV primer from one container to another. Some of it spilled on his left pants leg, later causing chemical burns to his leg. A Tyvek-type suit was being worn, but it had ripped.",1
An employee had removed the filter from the end of a vacuum pump when the rotating fan blade severely cut his middle fingertip. The pump was running at the time of the incident.,1
"An employee was climbing a ladder holding a bushel basket. The basket hit a shelf, which fell; the employee flipped backwards off the ladder and landed on his back on the floor. He suffered a broken vertebra in his lower back, with fragments sticking into the spinal canal.",1
An employee was moving a 3-foot-wide sheet of metal when its edge cut his left lower forearm. He was hospitalized. Cut-resistant gloves were being worn at the time of the incident.,1
"An employee was punching holes in metal pole base plates using a piranha machine. A piece of metal flew into his left eye, injuring the side of his pupil. He was hospitalized for eye surgery. Eye protection was not being worn at the time of the incident.",1
"Two employees were providing maintenance to a vacuum wheel when their hands were caught in the vacuum wheel. One employee received broken bones in his hand and forearm, requiring hospitalization. The second employee suffered acute carpal tunnel in the left wrist. The vacuum wheel was not locked out at the time of the incident.",1
"An employee tripped over a pallet, falling on his left side and suffering a hip/femur fracture. He was hospitalized, needing surgery.",1
"An employee was preparing to brew tea on a dual tea maker/dispenser machine. A customer came up to get some tea from the other dispenser. When the customer pulled on the handle, the housing was pulled too, causing the hot water going into the filter to spill onto and burn the employee's right arm and hand.",1
"An employee fell from a tow truck and the employee's head struck the ground, requiring hospitalization.",1
"A crew was felling a tree on a transmission power line. When the last cut was made, the tree came off the stump, crashing to the ground. Due to the terrain, it bounced and came straight back, striking an employee in the left leg. He suffered a compound fracture between the knee and the ankle.",1
"An employee was preparing a bus for daily use when she slipped and fell in the gravel lot next to the bus, striking the tire and rim and injuring her leg and hip.",1
An employee was loading a truck when she lost balance and fell off the ramp resulting in a fractured right leg.,1
"On November 9, 2018, an employee was changing a battery on a powered industrial truck. The employee's finger was pinched between the battery and the lifting equipment, suffering a partial amputation.",0
"At about 7:00 a.m. on November 9, 2018, an employee was walking in a blacktop-surfaced parking lot. The employee slipped on ice and fell, suffering a broken leg.",1
"An employee was assembling a mold, holding the block with his left hand on the table and placing the top of the mold with his right hand. The top section of the mold tipped over and crushed the employee's left index finger on the table, causing a partial amputation.",0
"An employee was fabricating a bracket on an iron punch press. The press activated while his hand was still in it, and its punch partially amputated his left thumb.",0
"Two employees were doing maintenance work on a dust collector. One employee's right index finger was caught in a belt and pulley on the machine, and was amputated just below the nail bed. The machine was not locked out or guarded at the time.",0
An employee was adjusting a building's flag when his left middle fingertip was caught in a wire rope and amputated.,0
"An employee fell on a shipping dock, suffering a hairline fracture of the left femur near the hip.",1
"An employee was flipping a pallet on material handling equipment when he lost balance and fell to the concrete floor, suffering crushed vertebrae.",1
"As she was about to use a ladder to climb down from a roof, an employee slipped and fell off the roof. She suffered fractured ribs and a concussion.",1
"An employee slipped and fell on a frosty deck, breaking an ankle and requiring hospitalization.",1
"An employee was working with a group of three other employees to strip a column form. The employee was holding the column form upright so that when it loosened it would not fall, while another employee was striking the outside of the form with a metal burke bar to loosen the concrete. The injured employee's left hand slid down the side of the form and the burke bar struck it, causing a laceration and fracture to the left ring finger.",1
A 9-foot alligator bit an employee on his right leg.,1
"An employee was taking a part out of a pointer clamp when the clamp caught the employee's left index finger, causing an amputation of the fingertip.",0
"An employee was bending a piece of metal tubing on a horizontal tube bender. The employee's thumb was caught between the tube and the die, and the tip of the thumb was amputated.",1
"While driving a sit-down forklift, an employee backed up into a rack, suffering an amputation to the left index finger.",0
An employee was performing maintenance on a generator at the plant and fell through an open platform. The employee sustained rib and tailbone injuries.,1
An employee was using an overhead crane to move steel tubing when one stack of tubing fell and struck the employee. The employee was hospitalized with a fractured left leg.,1
"An employee was walking on pavement, delivering mail, when his patellar tendon tore and his knee buckled.",1
"An employee was using a chainsaw to cut wood. The chainsaw kicked back and struck the employee in the kneecap, causing a laceration.",1
"An employee was arc welding when the welding rod came loose from the employee's welding gun. The rod became lodged near the employee's ankle, causing second- and third-degree burns. The employee was hospitalized.",1
"An employee was cleaning his service weapon when it was unintentionally discharged, striking his upper thigh.",1
"An employee fell 12 feet while erecting a steel beam, suffering a broken eye socket, nose, and leg.",1
An employee was measuring the level of a sand silo when his head struck the metal top of the silo. He suffered a subdural hematoma.,1
"An employee was climbing onto an out of service frac tank. At the top of the tank, he tripped on a rope and fell about 9' 4'' to the ground. He experienced three broken ribs, a concussion, a fractured wrist, a ruptured 
spleen, ad a collapsed lung. His personal fall arrest harness was not tied off to an anchor point at the time of the incident.",1
"An employee was climbing a ladder to paint. The hinge was not locked in place, causing the ladder to collapse. He fell to the ground, injuring his back/spine.",1
"A forklift backed over an employee's right foot, breaking it.",1
"An employee was riding as a passenger in a golf cart. The employee's right foot was hanging out the side of the cart when it struck a concrete wall/barrier, fracturing the right foot.",1
"An employee was leaving work for the day. After turning off the lights, he turned to walk out the exit door of the building and tripped over a cart that is used to move supplies and equipment around in the warehouse/docks. He sustained a compound fracture to his right arm, requiring hospitalization and surgery.",1
"An employee was operating an automated bagger. The bagger cycled and the seal bar pinched the employee's right index finger, causing an amputation. The machine was guarded at the time of the incident.",0
"An employee was checking the tension on a belt on a vehicle. The employee's left hand was pulled into the belt and pulley, causing a partial amputation of the left index finger.",0
"An employee was loading rolls of paper on a skid. He lifted the paper up to put a wedge on the skid when the hoist tipped and a roll fell off the skid. It rolled against the employee's right ankle, breaking it.",1
"On November 10, 2018, one of a temporary employee's left-hand fingers was pinched between a truss table and an ejector. The fingertip was amputated.",0
"An employee was climbing down a ladder when he fell to the floor, suffering a compound fracture to his right leg.",1
"An employee was holding a plastic water line under a sink while using a razor knife to trim the line. The knife cut his left little finger, lacerating a tendon. He was hospitalized, needing surgery.",1
"An employee tripped on a 5/8-inch-thick steel plate, used as a wheel stop for forklifts. He fell, breaking his left hip. He was hospitalized.",1
"An employee was on a ladder hanging a flag up on a flag pole when the employee fell from the ladder to the ground, suffering contusions and a concussion.",1
"An employee was cleaning the wheels on an oven infeed conveyor using a drill with a brush attachment when his hand slipped and his glove was caught in the wheels, resulting in amputation of his right index fingertip.",1
"Employees were changing a gasket on a steam line, using a tubular welded scaffold with 28-inch aluminum work planks two sections high. An employee fell about 12 feet from the scaffold, making contact with the scaffold on the way down and suffering five broken ribs, a punctured lung, and a laceration to the forehead. A harness was being worn at the time of the incident, but had been unhooked.",1
"On 11/11/18, an employee was looking for a cargo container on the vessel. He had climbed a ladderway to a catwalk when he lost his balance and fell backwards over a safety railing. He fell approximately 9 feet onto the deck level, before rolling and falling farther onto the main deck. He suffered a dislocated left knee and ankle and had some broken bones in his left foot.",1
"Two employees were pulling a loaded dumpster along a sidewalk. The dumpster's wheels locked up, pushing the front of it into a scaffold on the sidewalk; one employee's hand was wedged between the dumpster and the scaffold's pole. His left hand swelled.",1
"At about 9:00 a.m. on November 11, 2018, an employee was removing a basket of cooked pasta from a pasta cooker. The bottom of the basket got caught on the cooker.  As she pulled it, the cooker tipped over onto her; the water came out and caused second- and third-degree burns to her lower left leg and foot.",1
"At 9:00 a.m. on November 11, 2018, an employee fell off a ladder while stocking shelves. The employee landed on the floor, suffering a leg injury. The employee was hospitalized.",1
"An employee was standing on the rig floor watching another employee operate a set of power tugs when the tugs slipped and rotated, hitting the employee. The employee was knocked from the rig floor and struck the ground. The employee suffered a fractured lower right leg and right wrist.",1
An employee was stocking shelves with apparel from a rolling platform ladder when the employee fell to the floor. The employee was hospitalized with a broken hip.,1
An employee was rigging a load when his hand was caught between the load and a pendant line. His arm and finger(s) were broken.,1
"On November 10, 2018, an employee was in an aerial lift using a propane and oxygen cutting torch while performing demolition of a vessel. During the demolition process, the vessel caught on fire and the employee jumped out of the aerial lift. The employee sustained burns from the fire and a fractured pelvis and wrist from the fall.",1
"An employee tripped on a piece of plastic shrink wrap that was hanging off a pallet. She fell, breaking her hip.",1
"An employee was opening straw bales and loading them into a conveyor. As he was trying to cut the string off a bale, the string snagged and cut his left middle finger, causing a laceration that led to an amputation.",1
An employee was removing turkey gizzards with a gizzard removing machine when the back of the employee's left hand made contact with the gear section of the machine and was degloved.,1
"An employee was attempting to break up ice in a frozen water line when a fitting broke, causing the line to whip around and hit the employee's leg. The employee sustained leg fractures.",1
"An employee was grooving the end of a steel pipe using a roll grooving machine. The machine caught his right middle fingertip, cutting it off.",1
"An employee was in an aisle, doing cycle counts with a scanner, when a forklift struck him. He suffered a broken jaw and skull.",1
An employee fell approximately 8 feet while descending a ladder and struck his head.,1
An employee was attempting to close a gun vault in the rear bed of a law enforcement officer's patrol vehicle when the employee's right third fingertip was pinched between the drawer and cabinet of the gun vault.  The incident resulted in the loss of the right third fingertip past the fingernail and a fractured bone.,1
"An employee was walking in the parking lot, slipped on ice and fell breaking ribs and suffering a punctured lung.",1
"An employee suffered partial amputations to the right first, second, and third digits when her fingers were caught in the rollers of a machine.",1
"An employee was stepping out of a skid steer inside a building. The employee's foot was caught on the bucket and the employee lost balance and fell to the concrete, suffering a right hip/pelvis fracture. The employee was hospitalized.",1
"An employee was walking to his car after work, slipped on a patch of ice and sustained a dislocated ankle and two broken bones. The employee was hospitalized for surgery.",1
An employee fell and was hospitalized because she could not put any pressure on her leg.,1
"An employee was struck by a plastic shopping cart, lost balance, and fell to the floor, suffering a broken hip and wrist. The employee was hospitalized.",1
An employee was loading a hinge leaf into the gang mill. When the clamps activated her right middle finger was caught between the clamp and the fixture and amputated above the third knuckle.,0
"An employee was climbing down an extension ladder when the ladder slipped and he fell to the ground, fracturing his hip and right shoulder.",1
"A trailer shifted while an employee was standing on it. He lost his balance, reached out to catch himself, and placed his left index finger in the pinch point of a power swivel he had been loading onto a trailer. The fingertip was amputated.",0
"An employee was dismantling scaffold that was three frames high and had planking that was three planks wide. As he was dismantling the ladder portion, the ladder tipped forward and he lost his balance and fell 18 feet to the ground, suffering a left heel fracture, a right ankle fracture and compression of numbers 1, 2 and 3 vertebrae.",1
An employee was operating a bender machine and caught their right index finger between the part and the clamping device on the bender resulting in amputation of the finger.,0
"An employee's glove was caught between a conveyor and drive sprocket while the employee was pushing accumulated bagels forward on the conveyor, resulting in a partial amputation of her right index finger.",0
An employee was on a five-foot scaffold conducting framing operations and fell when the scaffold  was moved.  The employee suffered injuries requiring hospitalization.,1
"An employee was installing a shear pin in a cog and drive chain system when the employee's left index finger was caught in a pinch point between the chain and sprocket, resulting in a partial amputation.",1
"An employee was unpacking lockers from a shipping box and stacked a bundle of locker doors to the side. The employee then attempted to move several of the locker doors. A pile of doors fell onto the employee's left leg, fracturing it.",1
"At about 9:00 a.m. on November 12, 2018, an employee was testing a 6000 HP electric motor.  A piece of metal came off the motor and struck the right side of the employee's face, causing multiple head and face fractures. The employee was hospitalized.",1
"An employee was using an electric hand jack on the mixing floor when the jack backed over his right foot, bending his toes back. His toes broke, requiring surgery.",1
"An employee was cleaning a roll coater machine while it was on the cleaning cycle. While she was wiping the rollers with a rag, the cleaning cycle reversed, causing the rollers to reverse. The rag was then caught in the ingoing nip point, pulling her right index finger into the machine. Her fingertip was amputated.",1
An employee's right arm was amputated in a spinning towel dryer.,0
"An employee was standing on the third ring of a 6-foot ladder when he lost his balance and fell to the floor. His lower left leg was fractured and he was hospitalized, needing surgery.",1
An employee was running a shear machine when it amputated his right index finger.,0
"An employee tripped while climbing back into a work station. The employee's hand entered the gap in a saw blade's guarding, and the blade severed the top of the employee's ring finger.",0
"An employee tripped and fell to the floor, fracturing her right ankle.",1
An employee was operating a cold saw and suffered an amputation to the left index finger and part of the middle finger.,0
An employee was cutting scrap foam seat material into smaller pieces using a bandsaw. The saw blade amputated the first joint of the employee's right thumb.,1
"An employee was using a grinder to buff concrete when the wheel broke apart, striking the employee in the chest and causing a chest contusion.",1
"An employee was packaging cheese when the line where the cups go in became jammed from excess cheese. While he was cleaning the area around the cups, the machine became unjammed and caught his lab coat on a metal chain. The chain then fractured his left forearm.",1
An employee exited a vehicle in the parking lot and was walking toward the office entrance when the employee fell on the wet concrete pavement and fractured the right hip.,1
"An employee was directing a large articulating forklift that was moving some insulation off a flatbed truck. Two bales of insulation were stacked vertically on the forklift when the top bale slipped off, falling onto an employee and breaking the employee's hip.",1
"An employee was watching traffic when a rotted pole's base snapped, causing the pole to strike the employee on his back and shoulder. He suffered back and neck injuries.",1
An employee was shocked and burned on the left hand while working on a light switch.,1
"An employee was replacing the bolts that held the tongue to the main frame. The trailer was on the jack stands. Using the torch, he cut out the bolts on the left side then cut out the bolts on the right side. Some slag was still holding the tongue frame to the main frame. The employee used a bar to pry them apart when the front of the trailer fell off the jack stands and onto his foot breaking all five toes.",1
"An employee and a coworker were retrieving a large aluminum-frame screen from among several other aluminum-frame screens. One of the screens hit the employee's left index finger, catching it against the side of a press and causing an amputation to the fingertip.",1
"An employee was cleaning an HVAC unit when his left hand entered the unit and contacted the belt, resulting in an amputation injury to his left middle and ring fingers. The unit was running at the time.",1
"An employee ran into a flatbed trailer while driving a golf cart, suffering rib fractures that required hospitalization.",1
"An employee was removing bases from a truck's trailer when it lifted off the ground. The employee fell off the trailer and hit the sidewalk, suffering a shattered shoulder, a broken left arm, three broken ribs, a punctured lung, a broken left hip, and a broken bone in his back.",1
"An employee was performing maintenance on a piece of heavy equipment when he slipped and fell from the machine to the ground, injuring his head and ribs. He was hospitalized.",1
"An employee was stacking lead bottoms (lead blocks) beside the furnace in order for them to be transferred to the cast and alloying department. The employee stacked the blocks one on top of another and unhooked the gantry crane hooks. While raising the gantry crane to reposition it, one of the hooks was caught on the top of the lead block and the block was pulled over onto his feet. Both feet were broken.",1
"An employee was filling a truck with gas when the gas spilled on his pants leg. The gas-soaked pants later ignited, causing serious burns to his lower right leg. He was hospitalized and had surgery.",1
"An employee was loading and unloading oiled steel material. A load of the steel fell off the play hook and landed on the employee's left foot, crushing the ankle.",1
An employee was wrapping pallets when the chain on the pallet wrapping machine nipped the tip of his left index finger. He underwent surgery to graft skin onto the fingertip.,1
"At approximately 5:00 p.m., on 11/13/2018, an employee attempted to cut a plastic piece hanging from his ink pen using a utility knife. The knife missed the plastic piece and instead amputated his left middle fingertip.",0
An employee was helping to lift a flatrack and had placed his hand on the cable to keep the tension when the tension cable amputated his right ring fingertip.,0
An employee was setting up webbing on a machine when a dye cutter roller pinched him in the machine. He suffered six broken ribs and a stretched nerve in his arm.,1
"An employee was using an 8-foot step ladder to access boxes stored on an upper shelf when the employee fell from the ladder to the floor, suffering a lumbar spine injury.",1
"An employee was stepping off her motorized tug when she tripped and fell to the ground. Another tug ran over her right index finger, causing a laceration to that finger and lesser injuries to three other fingers.",1
"A forklift operator struck a stack of bales weighing approximately 1,200 lbs. As a result, a bale container fell on top of an employee standing in the area. The injured employee was hospitalized.",1
"At about 7:20 p.m. on November 13, 2018, a maintenance worker was installing a plastic clevis pin in the fully extended ram of an air-pressurized pneumatic cylinder. The clevis/pin ram caused a fracture and laceration to his right index fingertip that later resulted in a medical amputation.",0
An employee was using a crane to place a bundle of steel into a rack. An upright of the rack broke and the topmost steel bundle (about 7 or 8 feet high) fell on the employee's left foot. The employee was hospitalized.,1
"An employee tripped over a box while carrying a 40- to 50-pound rotor. The employee's finger was then smashed between the rotor and the ground, resulting in a fingertip amputation.",1
An employee was stacking a microwave on a shelf when the microwave fell and struck his head. He suffered a head laceration and lost consciousness.,1
"An employee was walking near a dryer when the employee slipped and tripped on a plastic bending tool that was on the floor, fracturing the right arm and requiring hospitalization.",1
An employee was using an improvised bailing wire tool to retrieve a piece of scrap metal from the extruder. The tool got entangled in a moving part and was snatched from the employee's hand. The employee's right index fingertip was amputated.,0
"A maintenance employee was attempting to move a fridge from the kitchen when the fridge tipped over and struck a steam table, causing the hot water to splash the employee. The employee was hospitalized with burns to the arms and face.",1
An employee was cleaning branches on the ground when another employee who was trimming a tree from an aerial bucket dropped a log on the employee below. The employee suffered broken ribs.,1
An employee was operating a wood splitter when its blade amputated his left index finger.,0
"An employee was helping install a fork onto a forklift. The employee's right index finger was pinched when the fork snapped onto the carriage, and the fingertip was torn.",0
An employee was on a metal ladder straightening boxes on top of a five-foot rack. He lost his balance and jumped two to three feet off the ladder landing on the concrete floor and shattering bones in his right ankle and leg.,1
A temporary employee was laying down insulation in the attic of a commercial building under construction. The employee fell from the attic to the concrete floor and suffered a concussion.,1
"On November 13, 2018, Cleargage employees developed symptoms such as nausea and respiratory distress the day after an indoor fountain had been waterproofed. One employee was hospitalized for observation and given oxygen.",1
"An employee was working on the roof of a car wash that was being built. The employee fell through a roof panel to the floor about 25 feet below, suffering 22 broken bones and a head laceration. The employee was hospitalized.",1
"An employee was climbing on a step ladder that was leaning against a van when the ladder slipped and the employee fell to the ground, striking his head and sustaining a concussion. The stepladder was closed at the time of the incident.",1
"On November 13, 2018, at 10:30 a.m., an employee was at a customer's facility, loading the truck, when the employee walked around the side of the truck, slipped on ice and snow, fell on the ground and a storm drain, and broke the left femur.",1
"An employee was clocking in with a key when he tripped on tools on the floor and fell to the cement ground, injuring his hip and requiring surgery.",1
An employee's head struck a porch beam. The employee suffered a concussion.,1
"An employee was standing on a chair while hanging holiday decorations in the break room. The employee fell to the floor, suffering a fractured pelvis and hematoma that required hospitalization.",1
"An employee was operating a horizontal saw and attempting to release a part under the saw plate when the blade lacerated his left index finger, resulting in a fingertip amputation.",1
"An employee was trying to spray de-galvanizing solution onto the entry rolls of a roll former. The gear grabbed his glove and pulled his hand under the guard, causing an amputation to his left little fingertip.",0
"An employee was setting up a welding/cutting machine when the robotic welder pinched the employee's fingertip, resulting in a fingertip amputation.",1
"An employee was installing rubber roof material at the edge of a roof. He fell to the ground 39 feet below, suffering a broken pelvis.",1
"An employee was changing out a motor when the motor fell and crushed his right middle finger, resulting in a fingertip amputation.",1
An employee was cutting meat on a bandsaw when he suffered amputations to three fingers on his left hand.,0
"A 12-foot steel plate fell while being lifted with a crane. The head of the plate caught an employee's hand, crushing the hand and the index and middle fingers. The tip of the employee's index finger was surgically amputated.",1
An employee suffered contact burns to the left and right hands after booming down on a power line.,1
"A nurse was putting an IV in a restrained patient. The patient grabbed the nurse, twisting her arm and causing numbness. She was hospitalized.",1
"An employee was on a ladder putting merchandise away. The employee fell from the ladder to the concrete floor, suffering a broken foot.",1
"An employee was sitting in a wheeled office chair at a computer station. While going to stand up, the employee's foot became caught on a computer cable/cord. The employee then tripped and fell, fracturing the right ankle.",1
"An employee was trying to hang a bicycle on a ceiling hook when he lost his balance. The bike fell and hit him on the left lower leg/ankle, breaking it in two places and requiring surgery.",1
"Employees were cleaning the ""skin puller machine"" with a water hose. The injured employee was operating a water hose and nozzle, spray cleaning the machine. After the machine was cleaned and re-energized the employee noticed a tag of skin inside the machine and attempted to retrieve it. The employee's hand contacted the rotating parts resulting in partial amputation of the employee's middle, ring and index fingers.",0
"An employee was placing/staging PVC pipe in various areas when the employee fell approximately 22 feet through an opening onto a wooden platform below, requiring hospitalization.",1
An employee was operating a front-end loader to push flowback solids into the solids bay when fumes from a liquid were ignited causing a flash fire and burning the employee's face and the backside of a hand.,1
"An employee was using a drum transfer cart to move a drum. When the employee disengaged the lock on the drum cart, it broke and injured the employee's hand.",1
"An employee was building pallets, nailing the boards together with a pneumatic nail gun. The gun fired a nail into his left leg above the knee.",1
"An employee was using a rake to brush excess breading from the top of a conveyor belt when his right index finger was caught by the conveyor, resulting in a fingertip amputation. His hand was under the conveyor at the incident.",0
"An employee was climbing a wooden ladder built at the jobsite to go between the third and fourth floors. The employee slipped and slid down the ladder, falling onto the third floor and injuring the left heel/ankle.",1
"An employee was using a hover mower when it slid forward on the dewy grass. He slid forward as well, and as he released the mower his left foot was caught in the bottom of the machine. His big toe and second toe were injured; the big toe was amputated.",0
An employee experienced body cramping and was hospitalized with a muscle injury possibly due to heat stress.,1
"An employee slipped and fell while climbing out of a truck, fracturing his hip.",1
"While cleaning a die press, an employee's left middle and ring fingers were crushed.",1
"An employee was removing a swing drive from an excavator. He had a lift strap wrapped around the swing drive and was attempting to lift the drive out of the machine.  The strap was underneath a fitting and caused excessive pressure on the fitting, which caused the fitting to break off and hit his forehead. He suffered a fractured skull.",1
"An employee was placing a heat exchanger into an outer cabinet. The employee's finger was pinched between the cabinet and the heat exchanger, suffering an amputation near the fingernail area.",0
"An employee was cutting pork loin with a band saw. As he tried to adjust a stuck gauge plate, his left hand contacted the band saw blade, causing a deep knuckle laceration that required surgery to repair the ligament.",1
"On 11/14/18, an employee was setting up a die on a wax press. At approximately 10:30 p.m., the press knockout came down on the employee's left pinky, resulting in a partial finger amputation.",0
An employee was loading film into a packaging machine when the machine activated and partially amputated the employee's right middle finger.,1
An employee was admitted to the hospital for an anxiety attack after a co-worker placed a fake rat on the employee's keyboard.  This caused immediate panic and chest pains.,1
"Two employees were moving a 125-pound piece of steel plate from one pallet to the next when the piece dropped on his right ring finger, resulting in an amputation to their right ring finger and a middle finger injury requiring stitches.",1
"An employee was descending an A-frame ladder when he slipped and fell on a 4-foot long light bulb tube that was set near his ladder. He suffered lacerations and cuts, as shards of glass were embedded in his right arm and lips.",1
"An employee was driving a stand-up forklift putting away products. As the forklift made a sharp turn, his left leg was caught between it and a safety bollard breaking his left foot.",1
"After unloading a truck, an employee went to close the tail gate when her right index finger was pinched by the tail gate, resulting in an amputation of the finger.",0
"On 11/14/18, at approximately 12:15 PM, an employee was using a foot-operated vertical splitter to re-split firewood logs when the blades struck the employee's right thumb, resulting in an amputation above the first knuckle.",0
"An employee was counting tanks in a canister room when she tripped over an O2 cart and was cut on the O2 stands. Suffering from disorientation when she was found, she was hospitalized.",1
"While surveying in the middle of an intersection, an employee was struck by a vehicle and suffered broken ribs.",1
An employee was operating a walk-behind asphalt roller. The employee's left little finger was caught and pinched between the handle of the roller and a building. The upper part of the finger was amputated.,0
An employee was stocking supplies in a parked ambulance when she fell out the back door to the ground and twisted her ankle.,1
An employee was installing panels for a garage when the wind blew a panel onto the employee's foot. The employee was hospitalized with a fractured foot.,1
Two employees were operating a stamping press. As one employee was feeding aluminum strips their right hand was caught in the machine and crushed.,1
"An employee was holding the top portion of a load bar and resting it on the dock when a coworker operating a forklift bumped the bottom portion of the load bar, pressing it into the injured employee's abdomen. The employee lost consciousness and suffered abdominal pain and bruised ribs.",1
"An employee was using a 4-foot ladder when he fell, fracturing his right ankle. He was hospitalized and had surgery.",1
"On November 15, 2018, an employee was stacking glulam timbers when one of the timbers fell. The employee's gloved hand was caught between it and another timber, resulting in a fingertip amputation.",0
"An employee slipped on ice on a stairway, losing his balance and landing on concrete. His leg was broken.",1
"An employee was driving a forklift to the shipping dock when he struck a shrink wrap machine. His left leg was caught between the forklift and the machine's guardrail, resulting in laceration to his left leg that required hospitalization.",1
"An employee was building a platform above a rotating grain leg head (shaft) when his lanyard was caught in the rotating shaft, breaking his right shoulder and left clavicle.",1
An employee was holding a pipe that was being threaded in a pipe threader when the employee's right hand and arm were pulled around the pipe. The employee sustained a right hand injury.,1
"Employees were loading materials when a box of gears fell onto one of them, causing compound fractures of the tibia and fibula.",1
"A WUSM employee was walking down a wooden ramp covered with snow and ice. She fell, breaking her left tibia near the ankle. She was hospitalized.",1
"On November 15, 2018, an employee was changing the bands on the rollers of an automated rolling line. The employee's left arm was caught in the rollers, causing compound fractures that required surgery and hospitalization. The equipment was not locked out or powered off at the time of the incident. Gloves and long sleeves were being worn.",1
"An employee was operating a heat shrink cutting machine when she attempted to adjust the chute. The plastic window/guard came off the machine and her hand entered the machine, contacting moving parts. She suffered an amputation of the middle finger on her right hand.",0
"An employee parked a garbage truck on the side of the road, then began to cross the road to pick up garbage. The employee was struck by an oncoming vehicle, suffering a broken leg, arm, and ribs. The employee was hospitalized.",1
"An employee was hooking a trailer to a truck when he attempted to push up on the chipper plate and the plate came down on his left middle finger, pinching it between the plate and the ground. His left middle finger was partially amputated.",0
An employee was cutting carrots with a food processor when the equipment amputated her right middle fingertip.,0
"An employee was unloading a large flat metal sheet roll (6 feet width) off a trailer. Each roll weighs about 8,000 lbs. The roll was not secured and rolled off the trailer, crushing the employee's lower left leg and resulting in an amputation below the calf muscle.",1
"An employee was using a jointer when the employee's left pinky finger made contact with the blade, resulting in a partial amputation.",0
"A truck driver was unloading his truck. Product fell off the pallet he was unloading and struck him, causing him to fall off the truck's lift plate. He suffered a torn ligament in the elbow or a broken bone.",1
"An employee was repairing a conveyor when the conveyor switched on and his hand was caught and pulled into the sprocket, resulting in an amputation of 50% of the pinky.",0
"An employee was grading mouldings on a moulder machine. When she attempted to blow off the machine with an air hose, her hand went between the guard and the moulder head. The moulder cutter head amputated  her right thumb and index fingers from the end of the nailbed to the tip.",1
"An employee was walking into the building when he slipped and fell to the concrete floor, striking his head on the floor. He suffered a head laceration and brain bleeding/swelling, requiring hospitalization.",1
An employee was conducting janitorial work when he was found unconscious at the bottom of the stairs by another employee. He was hospitalized with a skull fracture.,1
"Four employees were attempting to push electrical fitting material over a lift gate when the material fell onto the injured employee, who was standing below them at the time. The employee sustained five broken ribs and shoulder pain.",1
"A maintenance employee was troubleshooting a strapper machine and asked the machine operator to place the machine in ""Service Mode On."" However, the operator placed the machine in ""Service Mode Off."" The maintenance employee entered the machine and triggered the service eye, causing the machine to cycle. The machine then struck his foot, piercing his safety boot and resulting in the amputation of his right pinky toe.",0
"An employee was cleaning the back window of a truck, lost his balance, and fell to the ground fracturing his ankle.",1
An employee was wrenching down a clamp on a rolling platform ladder. He completed his task and was about to descend when he missed his footing and fell about 50 inches to the ground. He struck his head and right shoulder and was hospitalized.,1
"An employee was removing a vent plug on a pressure transmitter. Hydrofluoric acid and propane sprayed out of the instrument onto the left side of his face, causing chemical burns.",1
An employee was shoveling snow as part of his duties as a residential apartment maintenance mechanic and began feeling tightness in his chest. He was hospitalized.,1
An employee was using a table saw to cut wood when the saw blade amputated the tip of the employee's left thumb.,0
"An employee performed maintenance in conveyor tunnels under a packaging warehouse.  As he was attempting to leave the tunnels, he slipped and his foot was caught in the conveyors, breaking it.",1
An employee was operating a spot welding press when the hone (the cylinder that welds a nut to a part) came down and caused the amputation of a fingertip.,1
"An employee was working on a roof when he fell approximately 20 feet to the ground below, suffering head lacerations and fractured ribs.",1
"An employee was descending on a scissor lift. An electrical conduit on the wall cut through his glove, smashing his left little finger.",1
An employee was operating a tabletop crimper machine. The crimper was not working; the employee was trying to push the gears when they activated and amputated the tip of his left index finger. The machine was not guarded at the time.,0
An employee was straightening boxes. The employee's left-hand fingers were caught and injured in a conveyor belt.,1
"An employee fell approximately 12 feet out of a lift that tipped over onto a concrete surface, breaking bones in both feet.",1
"An employee was working with equipment when his hand was caught in the equipment, amputating half of a finger.",0
"An employee was cutting material on a bandsaw that had a hose connection to a vacuum system to collect the debris. The vacuum system became clogged, so the employee disconnected the hose and tried to clean the system. The system's motor or impeller broke his right wrist and lacerated his palm. The vacuum system was not locked/tagged out at the time of the incident.",1
"An employee raised up from a squatting/kneeling position to avoid a fire hazard from hot work. While doing so, he ruptured/tore his right quadriceps tendon.",1
"An employee was operating a scissor lift to offload a customer's trailer when the scissor lift lost traction on the trailer and slid down the trailer bed before tipping over and throwing the employee from the lift. The employee attempted to catch his fall with his arms, resulting in a broken right wrist and two broken right fingers.",1
"An employee stepped off an electric pallet jack and walked alongside it. He then attempted to stop the pallet jack by operating the controls on the handle. The pallet jack approached another piece of equipment, and his right leg was caught between the two pieces of equipment. He was hospitalized with a fractured right fibula and tibia.",1
"An employee was driving a mule (motorized tractor) outdoors to retrieve an asset. As he exited the mule cab to walk to the asset, he slipped on the frozen ground and fell onto the door frame of the open cab, hitting his back. He suffered several broken ribs and a fractured spine.",1
"An employee was in a parking lot, walking to her vehicle, when she tripped and fell to the ground. She suffered multiple fractures.",1
"While helping unload a trailer, an employee was struck by a forklift and fell off the loading dock to the ground. The employee's left tibia and fibula were broken.",1
"An employee was backing up a forklift when it struck a static conveyor, pinning his leg against the conveyor's support bracket. The employee's leg was amputated.",0
"An employee was installing sheeting on a roof. He slipped near the edge and fell 11 feet to the ground below, suffering broken wrists, broken arms, a head laceration, bruises on a leg, and a back contusion. He was hospitalized.",1
"An employee was performing housekeeping activities on a walking/working surface before installing an electrical panel board. While removing plywood on the walking/working surface, the employee stepped forward and fell through a floor hole opening, resulting in a right middle fingertip amputation.",0
An employee was walking into the car processing area to inspect a van when a heavy lift operator struck the employee. The employee was hospitalized with a fractured pelvis.,1
"An employee was tightening a drill bit with a wrench when the wrench broke free, causing the employee to fall to the ground. He landed on his back and suffered broken vertebrae.",1
"An employee was pulling a pin to uncouple the fifth wheel of a tractor trailer when the employee lost grip and fell backwards onto the ground, suffering a fractured hip and requiring surgery.",1
"An employee was installing girt on the metal roof (30 degrees) of a newly built greenhouse from a scissor lift. He got off the scissor lift to nail down the top of the girt, then fell 26 feet through the roof to the ground, breaking his left leg and injuring his neck. He was hospitalized. Fall protection was not being worn at the time of the incident.",1
"A maintenance employee was removing a hydraulic cylinder from a paint conveyor lift. When the cylinder was removed, the counterbalance was freed. The employee's left hand was then caught between the counterbalance and the stop plate, fracturing the hand.",1
"An employee was delivering packages when a dog attacked her, biting her face. She was hospitalized and had surgery.",1
An employee was trying to grab a letter from the conveyor belt when his hand became stuck between the protective transfer plate and the conveyor belt. He suffered a hand injury and burn marks.,1
"On November 16, 2018, an employee was driving a forklift when it struck a crane ""C"" hook. The employee suffered broken vertebrae and chest injuries and was hospitalized.",1
"An employee was attempting to remove rubber from a mixer door when his left arm entered the mixer, resulting in a left middle finger amputation and crushed left ring finger.",0
An employee was threading a rod on a lathe when the rod caught his gloved hand. His finger was amputated.,0
"An employee was walking from her vehicle to her workplace when she slipped on ice and fell, breaking her ankle. She underwent surgery.",1
"An employee was working from a 6-foot scissor lift. He stepped onto an adjacent ladder and fell, suffering broken ribs and a broken collarbone. He was hospitalized.",1
"An employee was climbing a ladder when the ladder slipped out from under him. He fell approximately 12 feet to the floor, injuring his right shoulder, right wrist, and right ankle and suffering a right knee laceration.",1
An employee was performing checks on a chain and sprocket when he tried to remove a piece of tape from the chain and his hand became caught in the chain and sprocket. He suffered broken bones in his hand.,1
An employee fell to the same level in an icy parking lot. The employee was hospitalized with a fractured left tibia.,1
An employee was cutting wood on a band saw when the blade cut his right hand.,1
"As an employee crossed the door threshold into the building, the employee's left foot slipped and caught a rug edge, causing the employee to fall onto the floor. The employee was hospitalized with injuries to the left knee and left eye, as well as a left arm fracture.",1
An employee fell 8 to 10 feet from a shed while inspecting shingles on its roof.,1
An employee was standing on a 5-gallon bucket while attempting to take a gas meter reading in a residential housing complex. The employee fell approximately 2 feet to the ground and was hospitalized for a broken leg that required surgery.,1
An employee was climbing a ladder up to a roof when the ladder kicked back. He then fell from the ladder to the ground and fractured his fibula and tibia.,1
"An employee was on the second from the top step of a 9-foot step ladder reaching into a bay when he fell to the floor between the ladder and adjacent racking. He suffered a head laceration, requiring staples.",1
"An employee was standing on the second or third step of a 6-foot step ladder, guiding a control box door with a pry bar. The pry bar slipped and he lost his balance and fell to the floor, breaking his right upper tibia below the kneecap.",1
"An employee was climbing a ladder to access a residential attic through a hatch. He slipped and fell, and his body struck against the ladder or another solid object as he fell. He broke four ribs.",1
A reach truck and a forklift collided. The reach truck driver's right foot was broken.,1
"An employee was scraping condensate from a furnace when a condensate flash fire occurred, causing second degree burns to the employee.",1
"An employee was replacing a breaker in a high voltage integrated circuit (HVIC) unit when an arc flash occurred, causing second and third degree burns to both hands.",1
"An employee was helping move a fusion welding unit with a forklift and a sling. The unit was frozen to the ground; when it was suddenly freed it swung, hit a pole, and knocked the employee to the ground, lacerating his face and breaking both his ankles. He was hospitalized.",1
"An employee was using an extended reach all-terrain forklift to move construction materials. The boom struck his right arm, breaking it. He was hospitalized.",1
"An employee was trying to get a heater to light up when it ignited, causing a flash fire. The employee was hospitalized with first and second degree burns to the face, neck, and hands.",1
"An employee was cutting a board on a rip saw while using a push stick.  The board kicked back during cutting and the employee's left hand was drawn into the saw.  The employee suffered an amputation of the thumb, and partial amputations of the pointer and middle fingers on his left hand.",0
"While exiting a plane, an employee tripped over the ramp in the jetway. The employee's left ankle was broken.",1
"An employee was operating a blow mold machine when a piece of plastic became jammed between the chain guard and the conveyor belt bed. As she tried to remove it, her left ring finger was caught and suffered an amputation. She was hospitalized.",1
"An employee had walked about 150 feet up a steep hill after helping pull conduit across a lake. His right foot slipped about 5-6 inches into a ditch and he fell onto his back, breaking his right ankle.",1
An employee was holding the pedal attachment of a pressurized pneumatic torque wrench when the pedal shifted and amputated the employee's right pinky fingertip.,1
"An employee was starting a plastic extruding machine when the die area caught fire, causing third degree burns to the employee's neck, nose, and ears.",1
"While installing reflectors on a street, an employee was struck on the head by the mirror of a car that had driven into the work zone.",1
A concrete truck backed over an employee's right ankle.,1
An employee was replacing a fabric sheet on a paper towel machine. The employee removed a pin on the winch and was checking to see if the machine was lined up when the employee's finger was caught by a moving part. The finger was partially amputated at the middle knuckle.,0
"On 11/17/2018, at 4:00 AM, an employee was working in an enclosed trailer at a customer's location, preparing down-hole tools using a break wash chemical. He was in close proximity to a space heater that ignited the fumes from the chemical. This caused second degree burns to the employee's face, requiring hospitalization.",1
An employee was in a chemical room when cleaning agent sprayed into the employee's eyes.,1
"An employee slipped on ice in a parking lot and fell, hitting his head on the icy pavement. He suffered a mild concussion and body bruising.",1
An employee was hospitalized with broken ribs after being struck by forks that dropped from a powered industrial vehicle.,1
"An employee was moving from one platform to another. The platform gave way and the employee fell 10 feet to the ground, suffering a broken left foot.",1
"A process technician was taking a sample of heated resid. Some of the resid got on the employee's face, causing first- and second-degree burns.",1
An employee was ventilating a building containing a gas leak and the gases ignited when the employee opened the door. The employee suffered first degree burns to the face and neck and second degree burns to both hands.,1
An employee was putting away equipment in a supply closet. The employee's right ring finger was caught and crushed in the closet's door frame.,1
An employee was trying to ignite a grill pilot light when built-up propane gas caused the flame to flare. The employee suffered burns to the eye and the right side of the face.,1
An employee suffered a lower back strain/sprain while bending over to put on boot covers.,1
An employee's hand was on a cable that was being used to lift a pipe from a rig when his finger was amputated.,0
"An employee was using a walkie stacker when his thumb was caught between the handle and a rack, resulting in a laceration to his left thumb.",1
"An employee was going to her vehicle in the parking lot when she slipped and fell on ice, suffering probable head and hip injuries.",1
"An employee was spotting for an articulating manlift operator that was moving materials. The employee climbed down a ladder and turned to go out a doorway, and was caught between the doorway and the lift's knuckle boom. The employee suffered broken ribs and was hospitalized.",1
"An employee was manually pushing a conveyor belt when her finger was caught underneath the belt, suffering a deep cut.",1
An employee was transferring a hot steam well inside the kitchen when she tripped and dropped the hot steam well and hot water on her foot. She suffered burns to her left foot and was hospitalized.,1
"An employee was helping install a conveyor belt. The employee had pulled the belt off the frame when the conveyor started. The employee's right middle fingertip was smashed between the belt and the frame, and the fingertip was amputated.",0
"On November 18, 2018, an employee was trying to clear a clog in the feeder throat of a press. The press cycle was initiated, and the tip of the employee's left middle finger was pinched in a metal door inside the feeder that closed when the press was activated. The employee suffered a fingertip amputation.",0
"At 11:00 a.m. on November 19, 2018, an employee was testing a fire pump controller. The controller arced, causing burns to the employee's neck, eyes, face, and hands. The employee was hospitalized, requiring surgery for the burns to the hands.",1
An employee was installing a drain pipe on a canopy when he started vomiting at the job site and eventually lost consciousness due to heat. The employee was hospitalized.,1
"An employee was winterizing a water craft using a power tool when the tool fell into the engine compartment, causing an explosion. The employee suffered first, second, and third degree burns to his arms, face, neck, and ears.",1
"An employee was operating a small roll press when both of the employee's gloved hands were caught between the rollers, resulting in a right index finger amputation at the second knuckle and smashed middle and ring fingers on the left hand.",1
"On November 19, 2018, an employee was cleaning a sink with drain cleaner that contained sulfuric acid. The cleaner reacted with another cleaner that had already been poured down the sink, and a chemical cloud formed in the bathroom. The employee was exposed and was hospitalized for chemical burns to the lungs, face and skin.",1
"An employee was assaulted by another employee, suffering contusions to the neck and head and a laceration along the left side of the jaw.",1
"An employee was performing repair work on a truck. He was inside the shoot attempting to dislodge a door. When the door popped open, he fell onto the ground 2 feet below, fracturing his pelvis and breaking his left arm.",1
"A temporary employee was changing a part in a bucking machine. The machine engaged and his thumb get stuck under the part, suffering an amputation.",0
A maintenance employee was preparing to replace a steel catwalk grate with a fiberglass grating. He was standing on the steel grate when the supporting bolts and/or grate gave way and he fell to the ground below. He suffered a fractured right ankle and right heel.,1
"An employee fell from a ladder to the ground, suffering broken vertebrae. He was hospitalized.",1
"An employee was delivering packages at a customer's location when he was assaulted by five youths, suffering lacerations, contusions, and a broken jaw.",1
"An employee was attempting to clear the cheese feeding port of a cheesecake machine when the machine moved, resulting in a left index fingertip amputation and broken bones. The machine was running at the time of the incident.",0
"An employee was using a meat band saw to cut up beef feet when the employee's gloved left hand was pulled into the band saw, resulting in a left index finger amputation to the first knuckle.",0
"An employee was working with two other employees to ensure the proper setup/startup of an extrusion machine.  The injured employee was conducting a quality check of the product on the conveyor between the extrusion and fibrillation roller when his left hand was caught between the conveyor roller and fibrillator, resulting in a left hand amputation.",1
"On November 19, 2018, at about 6:45 a.m., a temporary employee slipped and fell while removing snow from the walkways, suffering back and neck injuries.",1
An employee was helping a coworker in a parking lot. The gate arm came down on the employee's head.,1
"An employee tripped and fell on a sidewalk while delivering mail, injuring her right leg.",1
"An employee was using a forklift to move an electrical cabinet into packaging. The cabinet was secured to a skid for transport; the skid and the cabinet began to tip off the forks. The employee jumped off the truck to stabilize the load and the cabinet fell, breaking a bone in his lower leg.",1
"A maintenance technician was installing new plug outlets in a sixth-floor tenant space. He was standing on a 6-foot step ladder, working in the ceiling, when he lost his balance and fell to the floor. He suffered six broken ribs on the right side of his torso, as well as a bruised right lung. He was hospitalized.",1
"An employee was moving a steel beam that pivoted on one end. When the beam reached the end of its travel, it swung back and struck the employee on the shin. The employee suffered a fractured tibia and was hospitalized.",1
"An employee was rigging down an oil rig mast. While the pin was being removed from the derrick board brace, the derrick board swung and hit the employee in the rib area. The employee suffered contusion and fracture injuries in the rib and chest area.",1
"An employee was guiding a trench box into place in a trench when he lost his balance and fell approximately 9 feet into the box, striking his head. He suffered a cut on his head and a concussion.",1
"An employee was fixing an electrical sign while on an extension ladder outside a local bank when he fell from the ladder to the ground, breaking a femur and shattering an ankle.",1
"An employee was making a delivery when he fell out the back of his delivery box truck and hit the ground, injuring his ribs and head.",1
"An employee was using a saw to cut logs of tape on a floating machine. The employee was holding a towel that was then pulled into the saw blade, resulting in a middle fingertip amputation. The machine was not guarded at the time.",0
"While stretching roof insulation, an employee fell through a roof and landed on the ground. The employee suffered head and back injuries.",1
"Two workers were separating a bundle of 2-3 angle iron bar joists. The injured employee was using a pry bar on the ground and was the ""hook-on"" man. He was separating the angle iron (30-feet length x 2ft. high) when a loose iron bar joist fell onto the employee's left leg crushing it.",1
An employee was sitting at her work station when she got up and tripped over a purse strap that was on the floor. She was hospitalized with a broken right femur.,1
"At about 9:55 a.m. on November 19, 2018, an employee slipped on a wet metal decking plate and fell to the floor, breaking his right femur. He was hospitalized, requiring surgery.",1
An employee was putting logs on a crimping machine when it amputated the employee's left index and middle fingertips.,0
"Two employees were moving a sheet of metal from a shear onto a table. One of the employees dropped his end of the metal while the other employee was still holding his end. The employee's left index fingertip was pinched between the sheet of metal he was holding and a sheet of metal that was on the table, resulting in a partial fingertip amputation.",0
An employee was trimming bushes from a ladder when he lost his balance and fell off the ladder and onto a fence and the ground. He suffered a back injury and was hospitalized.,1
An employee was climbing a ladder to cover the exhaust fan when he slipped and fell approximately 12 feet. The employee was hospitalized with two broken ribs and a perforated liver.,1
"An employee was using a pallet jack to maneuver freight inside a delivery truck trailer when he stepped backwards and fell over the edge of the truck trailer. He fell approximately 4 to 6 feet to the ground below, fracturing five ribs on his right side.",1
"An employee exited a backhoe to help other employees raise a pitman arm. As he was on the walking platform, it raised and tilted and he lost his balance. He fell and the pitman arm landed on him, breaking his pelvis.",1
An employee fell while removing a wheelbarrow from a building. The employee suffered a broken right ankle and was hospitalized.,1
"On November 20, 2018, an employee had used solvent to clean a paint spray gun. The pressurized solvent cut into the employee's finger; later the wound began to burn and the employee was hospitalized.",1
"An employee was setting up a bagging machine. The employee was on a forklift so that the machine's legs could be adjusted; the machine tilted, smashing the employee's finger between one of its legs and the floor. The fingertip was amputated.",1
"An employee was laying down on a maintenance service catwalk to examine the electrical busbars on a crane when the crane moved in his direction and snagged his right foot. His right ankle was severely lacerated, eventually leading to a right foot amputation above the ankle.",1
"An employee slipped on ice and fell to the concrete ground, suffering a broken arm. The employee was hospitalized, requiring surgery.",1
"An employee was about to reposition a mandrel by hand when a puller engaged, causing the tooling to press against the puller plate. The employee's ring fingertip and nail were lacerated.",1
An employee was trying to remove a wedged food tray from a heated meal delivery cart. The employee's left index finger was lacerated.,1
"An employee was working from a platform about 4-5 feet off the ground, installing deck joists. The employee fell from the platform onto the concrete below, suffering a head injury.",1
An employee was lining up a water injection pump when naphtha and hydrogen sulfide were released. The employee was exposed and was hospitalized for injuries to the lungs. Personal protective equipment was not being worn at the time of the incident.,1
"An employee was operating the V door on a drilling rig. The joint of the casing was brought up to the rig floor, and the employee was pinched between it and the stump. The employee suffered a bruised spleen and was hospitalized.",1
"An employee was unhooking the converter dolly to a trailer when the dolly rolled and flipped up. The employee's left ring finger was then caught between the dolly and the back of the trailer, resulting in an amputation to the first knuckle.",0
"An employee was using a hand drill to put holes in metal door slats. The drill drilled through the employee's glove into the left middle finger, necessitating the amputation of the fingertip.",0
An employee was walking back into the store when she tripped on a pallet. She fell and broke her left hip.,1
An employee was unloading poles with another employee when one employee dropped his end of the pole and the other end bounced and hit the injured employee in the jaw. The employee was hospitalized with a broken jawbone.,1
An employee was clearing jammed plastic trim from a plastic recycling machine. His hand got stuck at the channel for plastic; he suffered a broken wrist and burns to his hand. He was hospitalized.,1
"An employee was being trained to use a manual lathe when her hand was caught and pulled into the wrap, causing her to flip over the lathe and injuring her arm.",1
"An employee stepped off an electric pallet jack, and their right ankle was caught and lacerated between the jack and a guardrail. The employee was hospitalized.",1
"An employee was cutting a concrete pipe with a saw when the saw kicked back and struck the employee's chest, lacerating it.",1
"An employee was delivering parts to a customer when he tripped over a tire rut in an unpaved parking lot and fell, fracturing his right hip.",1
"An employee was spotting for a forklift driver while it was moving 20-foot long I-beams. The employee walked into a gap about 3 feet wide, between the stacks of I-beams the operator was lifting. 
As the operator was raising the load of steel with a combi-lift, the front stack started to tilt forward. The operator quickly lowered the steel to keep the front stack from toppling over onto the injured employee, but the front stack had passed the tipping point and the steel fell onto the employee's left leg, breaking it.",1
"An employee was reentering a building through a roof hatch when he slipped on the fixed ladder, falling to the level below. The employee was hospitalized for a shattered elbow that required surgery.",1
"An employee was riding on the back of a waste truck. The truck backed over the employee's right foot, breaking it.",1
"An employee was trying to access a rooftop from an adjacent wall. He fell 6 feet to the ground below, suffering fractures to a thoracic bone.",1
"An employee was installing sensor equipment and fell from a fixed ladder to the floor. The employee sustained a fractured left femur, pelvis and arm. He also needed stitches for a laceration on the eyebrow.",1
An employee was conducting an experiment in which he cleaned a piece of equipment with pentane. The pentane spilled onto him and his work area; a nearby open flame caused it to catch fire. The employee suffered second-degree burns and was hospitalized.,1
"An employee was trying to put a dock leveler in place. A load of product was in the way; the leveler came down on his right little finger, causing an amputation up to the first knuckle.",0
An employee was working on a gang wall when their hand was caught between a metal waler and plate washer while installing wall spacers. The left middle finger sustained a laceration requiring surgery.,1
An employee was conducting maintenance on a belt and pulley system on a scrap conveyor. He was tracking the belt. He had loosened the head pulley and was retightening it when his hand slipped into the running belt and pulley system. His right index finger was amputated up to the first joint. The system was unguarded at the time of the incident.,0
"An employee was operating a cheese sealing machine. The sealer bar came down on his fingers, causing crushing injuries that necessitated the amputation of two fingers.",0
"An employee was cutting wood with a table saw. The saw lacerated his right index, middle, and ring fingers. Its blade was unguarded at the time of the incident.",1
"While trying to install a conduit, an employee moved a pallet and tripped over a hole in the floor. A piece of metal stud lacerated his arm.",1
"A grit blasting hose pressurized, blasting an employee's leg with compressed air and blast grit.",1
An employee had a finger under a T-post and was straightening it out when a piece of equipment contacted the T-post. The employee suffered a partial metacarpophalangeal amputation of the finger.,0
"An employee was on a ladder painting the outside of an apartment. The ladder legs slipped and the employee fell to the ground, breaking his leg and nose.",1
"An employee slipped on ice in the company parking lot and fell to the ground, suffering a broken leg and dislocated shoulder.",1
"An employee was on a dock standing next to a ladder where a portable bandsaw was located. The saw tipped and cut the employee's left thumb, causing an amputation.",1
"An employee was in an aerial basket, monitoring an operation. The employee's fingers were caught between a demolished pipe and another pipe, causing amputations to the left middle and ring fingers.",1
An employee was sitting in a chair when she fell from the chair and dislocated her right ankle.,1
"An employee opened a trailer's doors to dump a load of scrap material, then fell through an opening in a railing into an open wood pit. The employee suffered neck fractures, as well as a head laceration (from scrap wood in the pit) that required stitches.",1
An employee was sitting an axle when the employee's left pinky finger was caught and fractured between the I-beam and tie rod.,1
"An employee was cleaning roasting equipment when his hand entered an airlock unit, resulting in a fingertip amputation.",0
An employee was attempting to locate a noise coming from a conveyor system. The employee was checking the pulley for tightness when the belt grabbed his glove and caused severe friction burns to his right hand. He was hospitalized.,1
"An employee was adding sodium hydroxide to a batch of product. The liquid contents foamed out of the kettle and burned the back of the employee's head, cheek (causing redness), and leg.",1
A post pounding machine was being used to pound a post on site. The operator lifted the hammer top high and the hammer came out of the mast. The mast assembly missed an in-plate that would have prevented the hammer from separating from the mast when lifted above a certain height. The hammer struck the employee while he was setting up another post for placement. The hammer fell onto his hard hat and grazed his lip/chin area. The impact caused significant lacerations to the head and face.,1
"An employee was walking on the roof of a building when the employee stepped onto a skylight panel and fell through to the floor below, suffering a broken leg.",1
"An employee was operating a tape-making loom. A knot formed in the line; as it tightened, it caught and amputated the tip of the employee's little finger.",0
"An employee was walking down the stairs when she missed the bottom two stairs and fell, breaking her right femur.",1
"An employee tripped over a rocking chair in the den of a mental health outpatient's residence. She fell to the floor, suffering displaced and fractured ribs.",1
An employee was removing glue from the label paddles on a filling line. The employee's finger was pinched and amputated between a paddle and rollers. The machine was guarded at the time of the incident.,1
An employee was rotating an axle with a spreader bar that had hooks when the axle fell out of the hook and smashed the employee's finger between that axle and another axle. The employee's fingertip was de-gloved.,1
"An employee slipped and fell in an asphalt parking lot, fracturing her tailbone.",1
"An employee was delivering construction material to a residential home construction site, slipped and fell, suffering a broken right ankle.",1
An employee was operating a paper cutter machine that cuts and folds paper into envelopes of different sizes. Part of the process is to stick adhesive onto the envelopes. The adhesive is poured into a reservoir located directly underneath a set of gears (sprockets). The operator was trying to remove a piece of paper that had fallen onto the reservoir when their right index finger was caught in the gears and amputated.,0
"An employee was using a router on a wooden door in a construction shop when the router moved unexpectedly, making contact with the employee's left hand and lacerating it below the thumb.",1
"An employee was lifting a barge cover via a crane with a strap when the employee's right thumb was caught between the strap and the lifting hook of the barge cover, resulting in an amputation injury.",1
"An employee was connecting the trailer to the tractor. While turning the crank on the trailer to level it up with the tractor, the crank flipped around and struck the employee's right elbow fracturing it.",1
"An employee was cutting the bands on a stack of 38-foot railroad ties. When the last band was cut, the ties fell onto the employee's leg and ankle, resulting in a fractured left leg.",1
"An employee slipped while standing up, and his right index finger jammed into a stopped lint cleaner machine. He suffered a three-quarter amputation of the finger.",1
"An employee was helping to remove a manhole cover when the tool used to remove the manhole cover slipped out of the groove, causing the heavy cover to crash down on the employee's finger. The employee suffered a left middle finger laceration that resulted in a fingertip amputation.",0
"An employee was holding a chain to attach to a hook on a hoist. The employee's finger was pinched between the chain and the hook, and the tip was torn off.",0
"An employee was cleaning parts of a pill-making press. The employee's right hand was caught between movable machine parts, and part of the middle fingertip was amputated.",0
An employee was performing drilling operations when his sleeve was caught in the drill. Four fingers on his left hand were amputated.,1
"An employee was doing maintenance work in a substation. As the employee inspected a piece of electrical equipment, an electrical flash occurred in the equipment. The employee's finger was burned.",1
"An employee was using a box cutter to cut shrink wrap from a pallet when the cutter head broke and exposed the blade, causing a deep wound to employee's left index finger. The employee was hospitalized and required surgery.",1
An employee's knee buckled while they were walking down stairs. The employee was hospitalized for an infection.,1
An employee was cleaning a chute when his right hand came into contact with the rotors at the bottom of the chute. Four fingers were amputated.,0
"An employee was cleaning out the salt in a pellet press with an air hose when the air hose wand was pulled into the press by the rollers. As the air hose wand was forced upward by the rollers, the employee's hand was caught in between the air hose handle and the frame on the press' latch door. The employee's right index fingertip was amputated and the same finger was fractured.",1
"An employee was feeding whole fruit and vegetables into the feeder chute of a food processor.  A pepper became stuck in the feeder chute; as he advanced it down the chute, the blade struck his middle finger and severed the tip.",0
"An employee was operating a bagging machine. As the employee replaced a bag, the machine was triggered; the employee's right little fingertip was amputated.",1
"An employee was attempting to close a metal mail cage when it closed on her right middle digit, lacerating and breaking it.",1
An employee was performing a service check on an aircraft and suffered a compound fracture to the right leg/ankle.,1
"On November 23, 2018, an employee was dumping metal scrap into a charge pot in the melt room when an explosion occurred and hot mag flew out and peppered the employee. The employee was hospitalized with burns to the left wrist, right hand, right shoulder, neck, upper arm, head, and scalp.",1
"An employee was changing out the plastic core on a portable winder machine. After replacing the core, the employee turned on the machine and began to wind some material onto the new core. The employee's right hand then contacted the chuck of the winder, resulting in a right index finger fracture and partial amputation. The machine was not locked/tagged out at the time of the incident.",1
"A mail carrier was struck by a vehicle while crossing the street, suffering broken ribs. The carrier was hospitalized.",1
"An employee was walking back into a client's home when she fell on a step, fracturing her hip. She was hospitalized.",1
An employee was maneuvering a golf cart to do a U-turn when the cart tipped over. The employee suffered a dislocated left second toe and an amputation of the left big toe.,1
"An employee tripped or slipped, suffering injuries. The employee was hospitalized.",1
"An employee was conducting maintenance on a forklift when it rolled, pinning the employee to the wall. The employee suffered two broken legs.",1
An employee was hospitalized with lower back pain after engaging in housekeeping activities.,1
"An employee at Dean Steel Buildings, Inc., was operating a flashing machine to bend siding when the machine was activated via the foot pedal and pinched his right hand with the material he was bending. This resulted in a fourth finger amputation and a partial right middle fingertip amputation.",1
"An employee was pre-sorting construction debris. A loader was being used. A wire caught on the loader and tripped the employee, flipping him backwards; he hit his head on the floor, suffering head trauma. He was hospitalized and underwent surgery.",1
"An employee was instructing skiers when a skier collided with the employee. The employee suffered a fractured left leg, requiring hospitalization and surgery.",1
A truck driver was helping a crane operator unload the truck. The crane hook was dropped onto the driver's right index finger resulting in a fingertip amputation.,0
"An employee was lifting an approximately 20-pound glass rack for a dishwasher when the employee's back seized up, requiring hospitalization.",1
"An employee was clearing a jam when his smock became caught on a sprocket and pulled his right arm in, resulting in a severe laceration to the upper right arm.",1
"An employee was chalking lines on a second-level floor when the employee fell 10 to 12 feet to concrete below, suffering a broken right foot, broken toes, a broken vertebra, and a head injury.",1
"A Disney employee tripped over a stone in the hardscape while walking to her car. She suffered a broken elbow and arm and was hospitalized, needing surgery.",1
"On November 24, 2018, an employee was overcome by ammonia leaking from a cooling system.",1
An employee was putting a belt onto a scalping machine. The machine was activated and four fingers on the employee's right hand were amputated.,1
"An employee slipped on ice walking in a parking lot. She fell, breaking her ankle, and was hospitalized for surgery.",1
"An employee was in a parking lot, leaving a car to go to work. He slipped on ice and fell to the ground, pulling a thigh muscle.",1
"A maintenance employee was performing a pre-trip inspection of a trailer. After inspecting the tires he used an air tool to tighten a lug. While tightening the lug, the tire exploded and the employee suffered a broken left leg.",1
"An employee was spraying a chemical to clean a bathroom. After bending down, she felt dizzy, got up, and lost her balance. She fell to the floor, breaking a bone in her right leg under the knee.",1
"An employee was in a feed yard, using a winch to move livestock panels. The suspended panels shifted; as the employee tried to reposition them, he was knocked to the ground. He was hospitalized to treat two vertebrae in his lower back.",1
"An employee was washing glasses when a glass broke and lacerated the employee's right thumb tendon, requiring hospitalization.",1
"An employee was loading a tractor-trailer when the driver moved the tractor. The employee then fell from the tractor and was run over by the trailer, suffering a fractured pelvis.",1
An employee was exposed to bleach vapors while attempting to pressurize a 5-gallon spray can and suffered difficulty breathing.,1
An employee was using a bandsaw to trim meat from a bone. The blade amputated his left index finger.,0
"On November 25, 2018, at about 11:10 AM, an employee was cleaning a shower when she slipped and fell on the shower floor. She injured her lower back and was not able to move her right hand and leg.",1
"An employee was installing house wrap on a deck when he bent over the temporary railing to pick up debris and the railing gave way. He fell 6 to 10 feet to the ground, fracturing a tibia and fibula.",1
"An employee was attempting to troubleshoot a machine that was not working properly when the chain pulled his gloved hand into the moving conveyor, crushing his middle and index fingers and resulting in finger amputations.",0
An employee was cleaning a roll former machine with a rag when his fingers got stuck between the rollers. His index and middle fingers were amputated.,0
"An employee fell to the ground while climbing down a ladder, suffering a broken femur and two punctures to the arm.",1
An employee was caught between an air compressor and a stationary bucket truck. The employee suffered a hip fracture.,1
An employee stepped out of a scissor lift onto a roof that was approximately 11 feet above ground. A second employee was handing the first employee a piece of 14-foot metal trim when a gust of wind swung the metal trim and the first employee into a powerline approximately 15 feet away. The employee suffered an electric shock and second/third degree bilateral arm/leg burns.,1
An employee was shot in the head and hand during a robbery at gun point.,1
"An employee was working at a nurse's station when she had an allergic reaction (sneezing, clogged ears, closed throat) to a coworker's lotion containing tree nut oil. She was hospitalized.",1
"An employee was using an overhead crane to stack steel angles when the sling loosened and the stack of angles tipped over toward him. The stack struck the bottom of his left leg, breaking a bone.",1
"On November 26, 2018, an employee was helping a forklift driver move a 4,000-pound load of rubber when the forklift driver hit the tilt button, causing the load of rubber to shift. This caused the bar that was supporting the rubber to release from the forklift tines and strike the employee, who suffered skull, cheekbone, and neck vertebrae fractures; a broken femur; and a smashed third right toe. The employee required surgery and stitches to the back of the head.",1
"An employee was pulling electrical cables in an electrical vault. The employee was splicing an energized electrical cable when it came close to completing the ground and flashed, causing a second degree burn to the right side of the employee's face.",1
"An employee was cleaning a flashbutt welding machine when the machine was activated via the foot pedal. The two ends of the welder came together and pinched the employee's left forearm, breaking it.",1
"An employee was cleaning a theater and walked up the ramp to the projection booth to turn down the volume. When he left the projection booth, he jumped over a guardrail (6 feet) and impacted the floor, suffering neck and back pain. He was hospitalized with a neck injury.",1
"On 11/26/18, an employee was operating a press brake to bend parts. The employee had slipped the part into the machine when the part fell back behind the press. As the die was coming down, the employee attempted to retrieve the part and the employee's right hand was crushed between the dies.",1
An employee was standing on the dock waiting for a container to be off-loaded so that he could place the container twist-locks. The employee moved in towards the container as the driver began to pull away. The employee was struck by the rear axle of the empty trailer chassis and suffered a fractured pelvis and right hand.,1
"While installing an air system from a walkway, an employee attempted to tighten a pipe with a pipe wrench. He used his body weight to apply more force and fell 12 feet from the walkway to the ground below, breaking his leg.",1
"As an employee reached between a coil roll of steel and a slitter machine, the employee's hand was lacerated and severely fractured.",1
"While doing landscape work in a garden, an employee tripped over a speaker rock and broke his leg.",1
"A nurse was moving patients within a building because of a carbon monoxide leak in the boiler room.  The employee became ill and was hospitalized, suffering from suspected carbon monoxide poisoning.",1
"An associate was removing a loose piece of cardboard from an automated storage and retrieval system to clear a fault. When the cardboard was removed, the machine cycled, pinching and partially amputating a finger on his left hand.",1
"On November 26, 2018, a maintenance employee was working on a packaging machine and amputated the right index fingertip.",0
"An employee was leaving a vehicle to go to work. The employee slipped on ice in the parking lot and fell to the ground, suffering a broken leg.",1
"An employee was working inside a saw when his hand/arm wrapped around a rotating square shaft that powered the conveyor system for the saw. His hand was mangled, requiring hospitalization.",1
"An employee was in a trailer unloading freight. Some of the boxes began to fall, and when she jumped back she tripped over a box and fell to the floor, breaking her right knee and right ankle.",1
"An employee slipped and fell on a wet corridor floor, suffering a broken right arm, one broken right rib, and a broken right hip.",1
An employee was trying to clear out cheese from the wheel area of a molding machine. His left middle fingertip was caught and sliced off.,0
"At about 7:30 p.m. on November 26, 2018, an employee was moving a pallet into a freezer using an electric pallet jack. As the jack turned, his right ankle was pinched and broken between the load and a wall. He was hospitalized.",1
"On November 26, 2018, a material handler was cleaning debris from a clogged chute on a grinder and suffered amputation of the first digit on the two fingers on the right hand.",0
"An employee was moving hams from a dumper to a trimming line. The trimming machine activated, and the trimming blades partially amputated the employee's right little finger.",0
An employee was greasing the plate of a semi-tractor when he fell to the concrete ground and injured his shoulder and ribcage.,1
An employee was looking for keys when a door struck the employee's head. The employee suffered a concussion.,1
"On November 26, 2018, at approximately 9:30 AM, an employee was operating a barrel machine when she attempted to pick up paper scraps that were behind the machine. Her head then entered the running machine and was scalped, requiring hospitalization.",1
"An employee was cutting 2x2 stakes out of 2x4 material with a circular saw. He was making vertical cuts when the cut went through the material and down his right leg, causing an 8- to 10-inch laceration to his lower leg (below the knee and above the ankle) that cut an artery.",1
"An employee was emptying ashes from a dump box when his left ring finger was caught between the handle and the ash box, resulting in a partial fingertip amputation.",0
"A correctional officer was supervising inmates and had just entered the officer's station when an inmate attacked the officer. The correctional officer was hospitalized with two cuts on the left hand, a laceration on the left forehead, a laceration on the left side of the nose, a laceration on the inside of the left upper lip, a hematoma to the right forehead, a laceration through the right ear, bruises on the chest, bleeding from the right ear drum, and a broken nose.",1
"An employee climbed up a turbine, inspected the chain hoist, and noticed that it was stuck. He was attempting to release the chain when it recoiled and pulled his hand into the hoist. He suffered a laceration to the left middle finger and a fracture to the left middle phalanx, requiring hospitalization and surgery.",1
An employee was operating a sheet metal bending machine when both hands were caught in the machine. The fingers on both of the employee's hands were crushed up to the knuckles.,1
An employee was cleaning a mortar machine. A paddle in the machine amputated half of the employee's left ring finger.,0
"An employee's right hand was pulled into a moving conveyor, and the ring and little fingers were degloved.",1
An employee was wiping down the rollers on a glue applier machine. The rollers caught and injured the employee's right hand.,1
An employee was attempting to restrain an aggressive and combative student. The student pushed the employee and hurt her neck. She later went to hospital and was admitted for a mild stroke.,1
"An employee slipped and fell, striking his head on the concrete floor and suffering a subdural hematoma.",1
"At 12:05 p.m. on November 26, 2018, an employee was trying to unjam the sheet metal feeder on a seam welder. The pneumatic pressure pushed the sheet metal against the employee, causing an amputation to part of the left thumb.",0
"An employee was bolting lumber onto a steel beam that was sitting on the ground. The beam tipped over onto his leg, causing compound fractures of the leg bones.",1
"An employee was standing in front of his computer entering information when he felt lightheaded and blacked out, falling flat on his back and hitting his head on the concrete floor. He suffered a brain bleed, a contusion, a concussion, and neck and back soreness, requiring hospitalization.",1
"On November 27, 2018, an employee was driving a stand-up forklift backwards when another forklift operator struck him at an intersection. He suffered a broken heel and torn Achilles tendon, requiring hospitalization.",1
"An employee was rolling metal when his glove was caught between the metal and the roller. The roller pulled in his fingers, smashing them and causing fractures.",1
An employee was using a table saw to cut wood. Their hand slipped and contacted the saw blade resulting in a fingertip amputation.,0
An employee was checking to see how a cutoff switch worked when the machine's paddle mechanism amputated the tip of his right index finger.,0
An employee was rinsing off the hen line and noticed a shackle that was off the rail. He reached to put it back on the rail and caught his right thumb in the shackle. The thumb was amputated between the first and second joint.,1
"An employee was loading/unloading a refrigerated truck when his hand was caught in one of the panels of the truck's sliding door as it was being closed. His fingertip was pinched, removing his fingernail and the surrounding skin/flesh. He was hospitalized.",1
"On November 27, 2018, an employee drank contaminated water out of a previously unopened bottle and was hospitalized.",1
"An employee was in a trench, helping fit up a section of 24-inch pipe. The pipe section pinned him to the trench wall and broke his pelvis. He was hospitalized.",1
"An employee was walking down a 6- to 8-inche slope between two rooms when she slipped and fell to the floor, landing on and fracturing her right femur.",1
An employee was installing flashing around the garage door and fell approximately 9 feet off the scissors lift to the concrete floor. The employee suffered two broken heels.,1
"An employee was standing on the offloading side of a bending machine. The counterweight of a side boom that was backing up came into contact with the machine's radiator. This caused the bolts to break loose from the mount, pushing it forward into the employee's waist. He fell forward into the fan area with his left elbow leading; the elbow suffered a gash/laceration.",1
"Two employees were performing a brake job on a vehicle. A passing coworker flipped an ash or a cigarette, causing some spilled brake fluid to catch fire. One of the employees suffered burns to the left arm and shoulder.",1
An employee slipped on a blanket and fell breaking a hip.,1
"An employee fell from a stack of pipes in a cargo dock, suffering fractured ribs and a dislocated little finger. He was hospitalized.",1
"On November 27, 2018, an employee was leaving a hotel where training was being given. She slipped on ice and fell, breaking her femur.",1
An employee was moving a piece of steel with a five-ton hoist. The metal cut the sling and the steel dropped onto the employee's foot fracturing the metatarsals.,1
"On November 27, 2018, an employee was walking in the trailer yard when the employee slipped on a patch of ice and fell to the ground, suffering broken ribs and a lacerated kidney. The employee was hospitalized.",1
An batch operator was loading beans from a grain bin into a screw conveyor system (auger).  The grate which sits above the conveyor and allows the product to flow into the auger became displaced exposing the auger. The auger blade caught his boot and pulled it into the conveyor system causing the amputation of the operator's big toe.,1
"On November 27, 2018, an employee was lifting a 150-pod ram out of a tripod with a lifting device. The ram twisted free, fell onto a jackleg, and struck the employee in the head. He stumbled forward and dislocated his shoulder as he fell onto his workstation. He was hospitalized.",1
An employee was hospitalized after falling and sustaining a head injury.,1
"An employee entered a cafeteria to retrieve his lunch, tripped over a cafeteria bench, and fell to the floor. He broke his left arm and was hospitalized, undergoing surgery to install pins/plates in the arm.",1
An employee was preparing structural beams for hoisting and was struck by a beam that tipped over during hoisting. The employee sustained a fractured leg.,1
"An employee was installing lightning arrestors at a new electrical substation. The employee had climbed a ladder to see how the lightning arrestors were installed on the energized side when an arc flash occurred. As a result, the employee received burns on his arms and back.",1
An employee was unloading baggage with a belt loader from an aircraft when the employee's scarf became tangled in the belt loader and pulled the employee into the opening between the belt and the guard. The employee suffered swelling and a fracture to the throat.,1
"An employee was checking the level of a floor when a backhoe bucket shifted toward him, pinning his lower legs and causing contusions.",1
An employee was hospitalized as a result of a spider bite.,1
"An employee fell from a ladder while painting with a sprayer. The employee suffered a fractured skull, broken ribs, and a broken pelvis.",1
"On November 27, 2018, an employee was unrolling tarp on a flatbed trailer when he fell off the trailer and broke his leg.",1
An employee was hospitalized after drinking methanol from an unlabeled bottle.,1
"An employee was changing accessories on a trackhoe when his index finger was crushed between the trackhoe and the jackhammer, resulting in a broken bone that required hospitalization.",1
An employee was on a baker scaffold preparing to perform plastering work and fell. The employee suffered a broken right ankle and three broken ribs.,1
"An employee was sleeping in the upper bunk of a tractor trailer. At around 9:45 PM, the employee fell from the top bunk onto the tractor floor, fracturing his right tibia. The bunk safety net was not in place at the time of the incident.",1
"An employee's pallet jack crashed into a rack, causing an injury to his left leg.",1
"An employee was climbing down a ladder with a nail gun. The gun fired a nail into the employee's chest, where it caused tissue damage but missed all vital organs. The nail was surgically removed.",1
A dropped paint can injured an employee's leg.,1
"An employee fell at the workplace, sustaining a contusion to his elbow and twisting his left foot.",1
An employee was using a knife to cut parts from inside a cow when the knife slipped from his hand and lacerated his right leg.,1
"Wire rope was coming out of the hole of a wellhead, being wound onto a counterwheel. As an employee tried to adjust the drum speed, the retracting wire caught his left ring finger. He suffered a partial amputation of the fingertip.",0
"An employee was adjusting blades on a slitting machine when the rollers pulled in his left arm, injuring his bicep.",1
"A temporary employee was cutting metal using a cutting torch when hot metal popped up and landed on the back of his shirt. His shirt ignited and he suffered severe burns to his back, requiring hospitalization.",1
"An employee missed a step of a 4-step stairway and fell to the floor, fracturing the right foot.",1
"An employee was moving wooden pallets onto the floor in a dry shipping dock. As he pushed a pallet, a wood splinter punctured his right hand.",1
An employee was dismounting from a truck when he slipped from the icy truck deck and fell 5 feet. He was hospitalized and required surgery.,1
"An employee was restarting a conveyor. When it started, it removed part of the pad of the employee's left ring finger and fractured the bone.",1
"On November 28, 2018, at approximately 1:45 PM, an employee was wrapping a tree with lights from a ladder at a residential location when a wind gust caused the employee to fall to the ground. He was hospitalized with an L1 back fracture.",1
"While a truck was being moved, a conveyor shifted in a trailer. An employee went up into the trailer to move the conveyor. The conveyor began to tip and struck the employee in the right thigh.",1
A temporary employee was feeding sheet metal into a roller when the roller caught his glove. He suffered an amputation to his left index fingertip.,0
"Air pressure was being applied to an underground natural gas line. The air escaped from the line, and air and dirt entered an employee's skin under his pants leg. He suffered a serious leg injury.",1
"An employee was placing wire on an aerial strand. He fell to the street from about 20 feet up, suffering head and body lacerations.",1
"An employee walking down a dirt incline slid and fell to the ground, breaking two bones and dislocating an ankle.",1
"An employee was dismantling a scaffold at ground level. A scaffold leg component fell over and struck the employee on the thigh, causing a femur fracture.",1
"On November 28, 2018, an employee had a hand on the top of a retort's door frame when the seal was broken. His right middle finger was pinched between the door and the frame, suffering an amputation.",0
An employee was using a pallet jack when his scanner fell. He bent to pick up the scanner and the pallet jack moved and pinched his pinky finger between the battery and plate. The finger was amputated.,0
"Ironworkers were connecting structural steel framing members at roof level. A scissor lift platform was extended approximately 25 feet above the concrete slab when the tagline rope on the end of the beam snagged on the handrail of the scissor lift. 
The top of the scissor lift was pulled over to the north. 
When the lift's center of gravity moved outside of the wheels, the scissor lift fell over. An employee was on the platform when the scissor lift fell over. He was tied off to the anchor point in the scissor lift and hit the concrete slab on level 4, suffering broken bones and internal damage.",1
An employee had his foot/leg run over by a roadway tiller during roadway demolition work in preparation for pavement. His foot and lower leg were crushed and surgically amputated.,1
An employee was repairing concrete and fell from a ladder. The employee was hospitalized for broken ribs.,1
"An employee pulled eight cases of orange juice inside bread baskets weighing approximately 170 pounds across the dock from the staging area to a van. He was trying to load the cases of juice onto the van by hand when the baskets became stuck on the dock going into the van. He pulled the bread baskets and they started to tip over onto the van. As he tried to catch the falling baskets, his right hand was caught between the van floor and bread baskets. He pulled his hand out, resulting in a right middle index fingertip amputation.",0
"An employee was walking down stairs while holding two bags when she fell down the stairs, suffering brain bleeding, broken ribs, a broken scapula, and a broken clavicle.",1
"A Nesika Energy employee had an allergic reaction to laundry detergent used in his flame-retardant uniform. He developed a rash on his forearms and legs, then swelling on the right leg due to infection. He was hospitalized.",1
"An employee was hand-tightening a ground cable in an electrical switchgear enclosure. A fault between two phases above the isolated work area caused an arc flash, and the employee suffered burns to the right side of the face and the backs of both hands.",1
An employee was rolling a tarp using a tarp roller. His right arm was caught in the roller and fractured. He was hospitalized.,1
"An employee was removing a stuck piece of wood from a gang rip saw when the employee's hand was caught by the rotating blade, causing a severe laceration.",1
An employee was rolling a belt on a driver on a re-saw machine. The machine was started up; the employee's right index finger was caught between a belt and pulley and amputated at the first joint.,0
"An employee was unloading a trailer and moving pallets when his foot was pinned between the forklift he was operating and another, parked forklift. The foot was broken.",1
"An employee was working on a machine. The belts and pulleys caught the employee's left hand, causing a partial amputation of the middle finger. The machine was not guarded at the time of the incident.",1
An employee was coming down from a scaffold when he fell to the ground and broke his left ankle.,1
An employee was standing on the dock talking to an employee sitting on a forklift. Another forklift operator was backing out of a trailer adjacent to the employee and struck the employee. The employee suffered a broken right leg.,1
"An employee was cleaning logs at a log deck when one of the logs went into the deck crooked. While the employee was straightening the log, the eye beam recognized another log and sent it to the log deck. The new log hit the employee's hand, which was then crushed between the two logs. As a result, the employee sustained a right pinky finger amputation.",0
"On November 28, 2018, an employee that was discarding trash to an outside dumpster slipped on ice and fell to the ground, suffering fractured ribs.",1
"An employee was spotting a roller truck driver from the top of a dumpster. The lower half of his body was pressed between a beam and a truck, and he suffered ruptured organs.",1
"An employee was clearing a line between a tender boat and a shear barge. The boat and the barge met, smashing the employee's right thumb between them. The thumb was partly amputated.",0
An employee was cleaning a meat/cheese slicer. The slicer amputated the tip of the employee's right thumb (with no bone or nail loss). The slicer was not energized; PPE was not being worn.,0
An employee was operating a standup clamp powered industrial truck (PIT) when he was caught between a concrete bollard and the PIT. He was hospitalized with a crushed ankle.,1
"An employee was operating a work vehicle and driving on a private road to meet with her supervisor when she hit an icy patch in the road and lost control of the vehicle, striking a telephone pole. She suffered a contusion of the left lower leg, a contusion of the right hand, and a contusion and laceration of the cerebrum, requiring hospitalization.",1
"An employee was removing asbestos-covered insulation from electrical lines underground when an arc flash occurred, burning his right and left hands. He was hospitalized.",1
"An employee was performing continuity testing on a circuit breaker. An alligator clip touched energized parts of the circuit breaker, causing an arc flash. The employee suffered second- and third-degree burns.",1
An employee's ankle broke when he slipped on ice while walking in the parking lot.,1
"An employee was setting up stamping arms on a 60-pound pig casting machine. One of the stamping arms was not operating properly, and the employee was on top of the mold chain conveyor trying to fix the stamping arm. The employee was walking up the mold chain conveyor when the employee’s foot became caught in the mold against the slide and the machine began to pull the employee down with the chain. The employee's right foot and ankle were smashed, and large amounts of swelling occurred. The conveyor was moving at the time of the incident.",1
"At about 9:45 a.m. on November 28, 2018, an employee was walking back to a conveyor to make sure no packages had been left behind. The employee slipped, fell forward with the left foot caught, and suffered a broken left fibula. The employee was hospitalized.",1
"An employee was using a directional drill to install 12-inch water pipe. The employee's right leg got stuck between the gearbox and the rod box, suffering breaks in many places. The employee was hospitalized.",1
"After delivering mail, a letter carrier returned to the post office and was lifting 10- to 15-pound tubs and pulling trays. His lower back seized up and he was hospitalized.",1
"On November 28, 2018, an employee was attempting to remove a jammed part from a tumbler door. When the part was removed, the air-actuated door closed on the employee's finger, resulting in the amputation of the right middle finger distal tip.",0
"An employee tripped while stepping over a 5-inch curb and fell into a guardrail, fracturing the left humerus. The employee was hospitalized.",1
"While installing roof decking, an employee fell 15 feet to the ground.",1
"An employee was walking out of a mobile office trailer. The access stairs for the trailer had been moved; the employee fell about 4 feet from the trailer to the ground, suffering several rib fractures.",1
"An employee was operating a brake press to bend a long narrow part that required multiple bends. During the last bend, the bottom of the part popped out and he attempted to grab the part to keep it from falling. His finger was pinched between the part and an exterior holding arm, resulting in an amputation of the end of his finger.",0
"An employee was cutting a tree limb with a chainsaw in an elevated bucket when the limb (after it was cut) fell toward the employee and struck his left forearm, causing a muscle injury.",1
"An employee was guiding/feeding rope through a winch when the winch caught/pinched the employee's left thumb, causing a partial amputation.",1
"On November 28, 2018, an employee was standing in a 4 1/2-foot trench when it collapsed. The falling clay/dirt broke the employee's left leg.",1
"An employee was erecting steel racking when a piece of the steel fell and hit the employee. The employee suffered a broken skull, shoulder, arm, and wrist.",1
"On November 28, 2018, an employee placed a check fixture on a rolling cart using an overhead hoist. As the employee was rolling the cart, the cart struck a seam in the concrete, causing the fixture to shift and crush the employee's left index finger, resulting in a fingertip amputation.",0
"On November 28, 2018, an employee was unloading bars with a forklift and then reversed in order to realign the forklift. The forklift mast was elevated at the time and hit a cross beam overhead, causing his forklift to overturn. His fingers were caught between the overhead guard and a concrete column, resulting in finger amputations.",0
An employee was pushing meat through a short rib saw. His right thumb was caught by the saw blade and was amputated just below the fingernail.,0
"On November 28, 2018, at 9:40 a.m., an employee was removing some meat bins from the meat grinder. As he was removing a meat bin, he was holding the top of the meat mixer cover open. The cover accidentally closed on his finger, injuring the middle finger on his left hand. The injury resulted in a surgical amputation of his left middle fingertip.",0
"An employee working as a bus monitor stood up to aid a student. When the bus hit a bump in the road, the employee fell and hit their head and the left side of their body. The employee was hospitalized for a stroke and brain bleeding.",1
An employee was attempting to release the fifth wheel and fell breaking a hip.,1
An employee was walking into work from the parking lot to start her shift. She slipped on ice and fell in the lot; her left patella was fractured into multiple pieces. She was hospitalized.,1
"An employee was next to a house, using an excavator to dig a trench for drainage pipes. Seeing a coworker run toward the back of the house where another coworker was working, the employee quickly swung the cab away from the side of the house (to make space to exit) and jumped out. The cab swung back, pinning him against a brick chimney. He suffered a crushed torso and collapsed lungs and was hospitalized.",1
"A truck had dumped a load of scrap metal, and a large piece of pipe rolled under the tandem tire. An employee was standing to the side of the truck (about 15 feet away) as it started to pull away. The tire then rolled over the pipe, causing it to shoot out from under the tire and strike the employee in the shin. The employee suffered a broken leg.",1
"During horseplay in a trailer, an employee attempted a backflip and landed on his face. He suffered severe facial lacerations, as well as a fractured and dislocated jaw.",1
"An employee was cutting an HDTP pipe with a chainsaw. The saw kicked back and struck his left leg above the knee, causing a laceration. He was hospitalized.",1
"An employee reached into a conveyor to remove a stuck piece of tire. The guarded tail roller of the conveyor caught his glove and pulled in his left arm, resulting in a broken bone and muscle damage.",1
An employee was clearing the asphalt sprayer bars on the back of a distributor truck when asphalt sprayed and burned his hands and forearm.,1
An employee was preparing wiring for an industrial baler when the wire uncoiled and lacerated his sternum.,1
"An employee was climbing an access ladder attached to the rear of an RV. He slipped and fell about 8 feet to a concrete floor. His left wrist and shoulder were broken, and he was hospitalized for surgery.",1
"A driver was picking up packages. While walking with them, the driver tripped on a wheel chock and fell off the dock to the ground, suffering broken ribs.",1
"An employee was walking through a parking lot to his car when he slipped on ice and fell, suffering several rib fractures.",1
An employee was preparing for work when her left foot struck an object. She then fell to the concrete floor and broke her hip.,1
"An employee was providing home healthcare services when the employee fell to the kitchen floor of a private residence and fractured a shoulder, requiring hospitalization.",1
"An employee was going up a ladder near the top of a module builder when he stepped off the ladder and went to open the door of the module builder cab.  He reached to open the cab door and lost his balance, falling to his right. He grabbed at the ladder but missed, and his right leg went through the ladder and snapped, breaking both bones in his lower leg. He was hospitalized.",1
"An employee was positioning an angle iron to set a stop for punching holes. The punch machine was engaged, crushing his left middle finger and necessitating a medical amputation.",0
"On 11/29/2018 at approximately 7:45 a.m., an employee was positioning a choker strap between a pipe and a reducing ""T"" as it was being lifted when the pipe fell/slid off a skid and pinched/crushed the employee's right thumb between the choker strap and the pipe.",1
An employee slipped on ice/snow and broke his ankle.,1
"An employee was cutting lumber using a powered saw when the blade cut his left hand, resulting in the amputation of two of his fingers.",1
"An employee lost her balance while mopping a restroom. She fell to the floor and struck her left elbow, causing bleeding, swelling, and a possible fracture (pending surgery).",1
"An employee slipped on ice while walking and carrying a block of salt lick through the company parking lot. He slipped and fell on a patch of ice and the salt lick landed on his right index finger, resulting in a partial fingertip amputation.",0
"An employee fell off a roof to the ground 8 feet below, breaking both feet.",1
An employee stepped on a piece of plywood over a screened porch and fell 17 feet backwards to the ground. The employee sustained head and back injuries.,1
"An employee was attempting to anchor down on the top ridge of a new two-story house (7:12 pitch) when his feet became tangled on the tie-off rope, causing him to lose his balance and eventually fall about 20 feet to the ground. He was hospitalized with three broken ribs, a collapsed lung, and a fractured pelvis.",1
"On 11/29/2018, at approximately 9:30 AM CST, an employee was conducting a pressure test of a plug valve manifold when a sudden drop in pressure occurred. He was going around the blast wall to determine the cause of the leak when a bonnet likely separated from the manifold and struck his leg, fracturing and lacerating it.",1
"An employee was cutting and removing the wires from a paper bale when part of the bale fell apart, causing a fracture to his leg.",1
An employee was pulling an empty mail hamper into the building when the employee lost grip of the hamper and fell backwards onto the ground. The employee was hospitalized with a fractured tibia.,1
"An employee was working on a needle press when it became jammed. While he was attempting to unjam the press, his left hand was caught in the press, resulting in the amputation of his left hand and part of his arm. The press had not finished its cycle at the time of the incident.",1
"Employees were moving a piano down the stairs of an apartment. The dolly slipped and an employee was pinned by the chest between the piano and the wall. The employee suffered contusions and pain in the chest/neck/back, losing consciousness briefly.",1
An employee was laying bricks from the working platform of a scaffold. Boards gave way and the employee fell 25-30 feet to a dirt floor. The employee suffered a broken heel and a hairline fracture of the hand.,1
"After strapping a child into a seatbelt, a bus driver's assistant fell to the floor while going to her seat. She broke her ankle and was hospitalized, requiring surgery.",1
"A welder was welding when some paint thinner fell from above, causing an ignition. The welder suffered facial burns.",1
"An employee fell in a facility, suffering a broken left hip.",1
"An employee jumped out of the tailgate of a work truck, breaking his lower left tibia.",1
"An employee collapsed while working on a scaffold, falling to the concrete below. The employee suffered a broken neck and a brain injury.",1
"An employee opened the door to a brewery kettle to check the liquid level. The boiling contents overflowed, causing second-degree burns to the employee's upper body.",1
"An employee was walking down a hallway when her toe caught on the floor. She fell, breaking her arm.",1
"An employee was using an overhead crane to lower a wind wall. As he lowered the piece into place, it crushed the fingers on his left hand. The nail bed had to be surgically removed and two fingers were fractured.",1
"An employee tripped and fell, breaking his right wrist on the ground.",1
An employee was going to hammer in the shaft of a paddle wheel and was waiting for it to rotate to the correct position before shutting it off. His hand was on the guard when it slipped off the guard and became caught between the pulley and the belt. He suffered an amputation of the left ring finger just below the fingernail.,0
An employee was cutting metal rod when the band broke and fell onto the employee's leg breaking it.,1
"An employee was mounting an extension ladder to climb down into a trench when he fell into the trench, breaking a vertebra.",1
"A service technician was working from a bucket truck about 14 feet high, repairing a sign. He received an electrical shock after touching the metal channel letter raceway, suffering severe burns to both of his hands. He was hospitalized.",1
"An employee was reaching between a blowout preventer (BOP) and tubing slips to pick up the BOP ring gasket when the chain broke on the BOP, causing the BOP to fall and crush the employee's right index finger. The employee's finger was amputated to the first knuckle.",0
"A rural mail carrier was walking his route when he fell on a metal object in a yard, cutting his left thigh.",1
"An employee fell off the third or fourth rung of a ladder when its feet slipped. The employee was hospitalized, undergoing surgery for an elbow injury.",1
"An employee was filling pitchers with ice and water. The employee's hand was caught in a door, causing the amputation of a fingertip.",0
"An employee fell from a ladder to the ground and suffered a head injury, requiring hospitalization.",1
"An employee slipped on ice in the parking lot and impacted the ground, sustaining a concussion.",1
"An employee tripped over a power cord and fell to the floor, fracturing her shoulder.",1
"An employee was moving a production pallet into place to be picked up by a forklift. Another pallet shifted and both pallets fell onto the employee's legs, breaking a femur. The employee was hospitalized, requiring surgery.",1
"An employee was intervening with a resident in crisis. The resident punched her twice in the face, causing her to fall to the floor and hit the back of her head. She lost consciousness and suffered a concussion, and was hospitalized.",1
An employee was cutting film when her arm was pulled into a spindle on the winder machine. The arm suffered multiple fractures.,1
"At about 6:45 p.m., an employee was riding in a rear-loading garbage truck, helping the driver. The truck stopped to pick up garbage, and the employee got out to pick up garbage cans. The truck drove forward over his right foot, breaking it.",1
"An employee was sanding an elastomer-covered pipe using an abrasive belt. The rotating lathe caught his right hand and arm, pulling them in and fracturing the arm.",1
"An employee reached under a bacon slicer to remove scraps when his right index finger contacted the slicer blade, resulting in an amputation to his fingertip pad with no bone loss.",0
"An employee was unhooking a shackle when the machine moved the washout box, pinching the employee's left middle finger between the box and the shackle and causing a fingertip amputation.",0
"An employee slipped and fell on ice in the parking lot, suffering a leg fracture that required hospitalization.",1
"An employee was using a manual, lever-style paper cutter to cut lintless wiper tiles to size when his left thumb went over the bar. The paper cutter blade then cut his left thumb tip, resulting in an amputation from the base of the nail through the front tip of the thumb.",0
"On November 30, 2018, at approximately 8:30 a.m., an employee was attempting to adjust the rollers on a rewind machine when his left gloved hand was pulled between the wire and rollers, resulting in the amputation of part of his left middle fingertip.",0
"An employee drove a car into a bay for service work. She fell while leaving the car, breaking her left ankle.",1
"An employee was placing and moving product onto a conveyor belt when he tripped over a pallet on the floor. He hit his head and arm on a support pillar, suffering a laceration to the arm and an injury to the head.",1
"Employees were setting a 700 lbs. I-Beam for bridge construction. The beam was lying on the ground in the roadway. As it was lifted into position to hoist, the beam tipped over onto the injured employee.  The employee sustained multiple broken bones in both lower legs.",1
An employee was cutting a used 55-gallon drum when it exploded. The employee sustained contusions and broken bones.,1
"An employee was attempting to remove frozen material when his hand was crushed by a steel gate, breaking three bones.",1
"An employee fell off a roof to the ground while removing shingles from the roof, suffering a neck injury.",1
"An employee was taking a hydraulic cylinder that was still under pressure off a forklift. The pressurized hydraulic fluid then released, de-gloving the employee's left pinky finger and cutting the ring finger. The pinky finger had to be surgically amputated.",0
An employee struck his head on a metal oil pan while jumping from one bay platform to another. The employee was hospitalized for a concussion.,1
"An employee was struck by a semi-trailer while pulling product out of the truck, suffering six broken ribs.",1
Two employees were in a van when one of the employees drove the van through the doors of a maintenance garage at a cemetery and struck another unoccupied work vehicle. One of the employees was hospitalized for contusions.,1
"While operating a power washer, an employee fell and hit their head, suffering an injury that required surgery.",1
"An employee tripped and fell to the ground while carrying a metal part. The metal part dropped on his hand, crushing his right middle finger and resulting in a fingertip amputation.",0
"On November 30, 2018, an employee was loading a shaft onto a winding machine using an electric hoist when the shaft caught the corner of the machine and began to fall from the hook. The employee's foot was struck by the falling shaft, partially crushing it and resulting in a big toe amputation. The employee was hospitalized.",1
"An employee was carrying a tent with three other employees when he stepped in a grassy area and fell, fracturing his right femur.",1
An employee's leg was caught between an order picker and a guardrail.,1
An employee was cleaning the interior of a gasoline storage tank using a power washer to facilitate disposal. A fire in the tank caused third-degree burns to the employee's face and hands.,1
"An employee was working as a cashier in a convenience store. A man in the store attacked her with a knife, stabbing her in the throat and abdomen.",1
"An employee driving a powered industrial truck (PIT) had paperwork on the PIT and the papers flew off. The employee stepped off the PIT to retrieve the paperwork and the PIT struck the employee's right lower leg, fracturing it.",1
An employee was using a 6-ft. self-supporting fiberglass ladder to remove light fixtures. He was working from the top step when the ladder kicked out from under him and he fell approximately 5 ft. to the ground. The employee sustained a fractured left ankle and a compressed L-4 vertebra disk.,1
An employee dismounted a skid-steer loader and fell into a trench injuring his right shoulder. The employee was hospitalized.,1
"An employee had connected two pieces of large wire together to provide a continuous feed of wire into a plastic extruder. The feed wire comes into the process on large metal reels; the employee was taking up the slack using a reel pay-off machine. As the wire slack was taken up on the reel, the wire swept the employee off his feet. The employee landed on his left shoulder and the left side of his head. He was hospitalized, suffering a subarachnoid and subdural hematoma as well as a shoulder injury.",1
An electrician was troubleshooting 480 volt 3-phase wiring when their left hand fingers contacted exposed wiring causing burns to the ring and pinky fingers.,1
An employee slipped while walking out of the freezer.,1
An employee was walking backwards while pulling a pallet jack and tripped and fell resulting in a fractured left leg.,1
"While accessing a second floor window for cleaning, an employee slipped and slid down the roof to the ground. He fractured his left elbow and left ankle.",1
An employee was hospitalized with a facial laceration and concussion after being struck in the head by the loading bar of a crane.,1
An employee was performing maintenance on an auger at a gin and was pulled into the auger when it was activated. The employee sustained damage to both legs including an amputation injury to the left leg.,1
"An employee was cutting corn. As he dumped it onto a trailer, he slipped and the trailer ran him over, possibly breaking his ribs.",1
"An employee was performing maintenance on a drilling rig when a lever was inadvertently pushed, causing a hydraulic ram to crush the employee's foot and resulting in the amputation of two toes.",0
"On 12/01/2018, a driver was unloading freight, pushing a cart, when it rolled back and jerked and then fell over onto the driver's right leg/ankle. The right ankle was broken and required surgery.",1
"An employee was pulling non-recyclable material and fell, suffering a broken left ankle. The employee was hospitalized.",1
An employee tripped on a cord and fell to the floor. The employee was hospitalized for a broken hip.,1
An employee fell while stepping out of the cab of his truck. He suffered a head injury.,1
An employee was driving the company car and collided with another vehicle in the pumping area. The employee suffered convulsions and difficulty breathing following the collision.,1
"An employee was using a powered industrial truck to transfer and deliver palletized supplies to a staging area. The employee was found lying on the ground next to his truck, which had struck a storage rack and was partially underneath it. He was hospitalized, having suffered rib damage and a punctured lung.",1
"At 8:35 p.m. on December 2, 2018, an employee was on a 9- to 10-foot mobile work platform ladder, using an air hose to dry the head pulley of a feed conveyor to keep it from slipping. The employee lost balance and began to fall forward, and their right glove was caught between the conveyor belt and the head pulley. The employee was pulled in, suffering a closed fracture to the ulna and radius.",1
"An employee was moving an air hose that was under a table, which was being lifted by a forklift. The table shifted, and the employee's right middle finger was caught between it and another table. The finger was partially amputated.",0
"During roofing installation, an employee fell 18 feet from the roof to the ground and sustained broken wrists and facial fractures. Fall protection was not being worn at the time.",1
"A grocery store cashier was shot twice (once in the cheek, once grazing the chest) by a handgun during an attempted armed robbery.",1
An employee working with a tire was injured and hospitalized. ,1
"At about 12:30 p.m. on December 2, 2018, an underground worker was working on a power line when it became energized. He suffered a burn to his hand and finger.",1
An employee suffered a right thumb tip amputation while working on a shaping press.,0
"An employee was installing duct work from a 10-foot ladder when the employee fell off the ladder and was struck by the duct, fracturing the right elbow and left leg.",1
An employee was placing product into a condemn barrel. The barrel is underneath a conveyor belt. Her left arm was caught by the conveyor belt and pulled into the drive shaft resulting in a fractured left arm.,1
"An employee had been setting up a machine for production. The employee reached into the die to check a bolt that may have been loose. At this time, the controls were engaged resulting in a right middle finger amputation.",0
"An employee was walking on an elevated edge, using a broom to clean cobwebs and dust. The employee fell about 9 feet to a concrete floor, suffering a head injury. The employee was hospitalized.",1
"An employee was cutting 4x4x15 pieces of steel on a wall saw. While positioning the steel, the employee's right hand was pinched between the hydraulic clamp and the steel. The right pinky was degloved up to the second knuckle. The employee required a medical amputation of the pinky just below the knuckle.",0
"An employee was undoing a snag of wire splice hung up on a pole. The wire snagged the employee's left glove, pulling the employee's hand into the wire rollers; the employee's left thumb suffered several fractures.",1
"An employee was attempting to clean out clogged product from the bottom gate of an industrial mixer screw conveyor when the screw caught his left index finger, resulting in the amputation of his finger to the first knuckle. The conveyor was running at the time of the incident.",0
"An employee was operating a truck behind a vehicle laying down road striping. A tractor-trailer veered into the work zone, striking the employee's truck. The employee suffered back, neck, hip, and head injuries and was hospitalized.",1
An employee was transferring liquefied petroleum gas to a residential storage tank when a faulty valve released propane vapors that burned the employee's face and caused eye damage.,1
"An employee was conducting an estimation for house insulation when a contractor on site threw debris out of a window. The debris hit the employee's head, causing a head laceration.",1
"An employee was attempting to bend a 90-degree angle on a part at a press brake when his right index finger was caught between the machine and the part, resulting in an amputation from the nailbed to the fingertip.",0
"While repairing a truck trailer, an employee fell backwards to the ground, suffering a broken femur. The employee was hospitalized.",1
An employee slipped on ice and fell in the parking lot between vehicles. The employee was found unconscious and unresponsive.,1
An employee was on a 20-foot extension ladder replacing a light fixture on the outside of the building next to the basement entry. The employee fell approximately 10 to 15 feet off the ladder and was hospitalized.,1
"On December 3, 2018, an employee reached into the fluff grinder of an extrusion machine to empty the fluff. The employee sustained an amputation of the right pinky finger to the first knuckle. The machine was running at the time.",0
"An employee was test-riding a bike he had just assembled. The bike crashed, and the employee suffered a compound fracture to the upper right arm.",1
An employee was lifting a 35-lb. battery and injured his back. He was hospitalized with lower back pain.,1
"On December 3, 2018, two employees were making tablets of an automotive airbag propellant (MA3-71) on the rotary press. The employees were remotely operating the press from the hallway and observing the operation through a window. An explosion in the press occurred and a piece of metal shrapnel penetrated the glass window and lacerated one of the employee's shoulders. The injured employee was hospitalized.",1
"An employee was repairing a broken pin on a 7-millimeter expander. During the repair, a 200-pound guide plate dropped about 5 inches and landed on top of the employee's right fingers. He suffered a broken bone on his right index finger and was hospitalized for surgery.",1
An employee was running a test/debugging equipment when his left thumb was amputated down to the knuckle by the machine blade. The machine was unguarded at the time.,1
An employee was positioned on an extension ladder to pour concrete. The concrete bucket slid from the forks of the forklift and struck the ladder causing the employee to fall 8 to 10 feet to the ground. The employee sustained fractures to the right wrist and left ribs.,1
An employee was punched by another employee causing them to fall to the floor and hit their head. The employee sustained a brain bleed.,1
"An employee was driving a forklift, which struck another forklift. The employee broke a bone above the left ankle.",1
An employee on the production line suffered a fingertip amputation when their finger was caught between a roller and a belt while grinding automotive belts.,0
"While trying to fix a pulley and tarp system on a shred truck, an employee sustained the amputation of half an inch of the middle digit on the right hand.",0
An employee fell from a ladder and was hospitalized.,1
An employee's fingers were amputated while attempting to clear a jam in a sliding table saw. The saw was running at the time.,1
"An employee was performing a pre-trip inspection of a tour bus when she tripped on an opened wheelchair ramp and fell to the ground. She suffered fractures in her arm and right shoulder, and was hospitalized.",1
An employee was placing screens at a sifter when his left middle finger was caught in the press plate of the sifter resulting in a partial amputation of the fingertip.,0
"An employee was lifting heavy boxes in the warehouse when the employee strained the upper arm, experiencing pain that required hospitalization.",1
An employee was using a table saw to cut a 45-degree angle. The saw kicked back during the cut and the employee's hand was forced into the saw blade. The employee suffered a cut on the right palm and a partial amputation of the fifth digit of the right hand. The saw was not guarded at the time.,0
"While using a glass sheet cutting machine, an employee suffered a compound fracture and a partial amputation of the left ring finger.",0
"An employee was getting out of a semi-truck passenger door, inside the mechanic shop. He put his foot on the foot board and went to move it down to the lower step when his foot got caught on the board's grating. He fell approximately 34"" onto the concrete floor sustaining a fractured left hip.",1
An employee was assaulted while attending to a patient under constant observation. The employee was rendered unconscious due to a head injury or strangulation.,1
"An employee was operating a chainsaw while cutting brush and small trees in a utility right-of-way. The employee cut an 8- to 9-inch ash tree and the tip of the saw came in contact with a stump resulting in a kickback. The chainsaw struck the employee, resulting in a laceration and fractures to the face.",1
Two employees were performing aerial work using a bucket truck. One employee was in the bucket when the truck backed into a 3-phase electrical line (7500V). The power grounded him and held him on the wire. He was hospitalized for second to third degree burns to 30-40% of his body.,1
"An employee was removing files from a rolling filing cabinet when her foot was caught on the file base of the cart, resulting in a fractured left ankle and right foot. She was hospitalized.",1
"An employee had blocked the presser to remove a jam from the gasket machine. After starting the machine the employee realized the safety block needed to be removed. When the employee tried to remove the block, the machine completed its cycle and caused the partial amputation of a finger.",0
"An employee was removing ketchup from a fixed pusher bar. The employee's fingernail was caught in the conveyor; the fingernail was removed, the fingertip was amputated, and the distal phalanx was fractured.",1
An employee was using a forklift to transport a mechanical part. During transport the part fell off the forklift causing the operator to look sideways. The forklift struck a support pole of the warehouse canopy. The employee's left foot was crushed between the forklift and the pole.,1
"An employee was plowing a conduit, watching warning tape go into the shoot. The tape holder brushed against a telephone pole while his hand was on it, and his fingertip was pinched and amputated.",0
"An employee was unloading chicken coops from a trailer on a dock. The employee turned to place a coop on a conveyor, and his foot slipped down next to the knuckle chain. He fell, breaking his left leg between the tibia and fibula.",1
"An employee was unloading a telehandler on a flatbed trailer when the telehandler fell from the flatbed trailer and overturned. The employee struck the ground and telehandler as he fell, suffering broken ribs that required hospitalization and surgery.",1
"An employee was transferring a steer into a trailer from a holding pen. An animal struck a gate panel, which caught the employee's left hand. The employee was hospitalized, and three fingers were medically amputated.",1
"An employee sprained their left foot after falling from an upper roof surface to a lower roof surface. The employee was connected to a lifeline, but there was enough slack to allow the employee to contact the lower level before the lifeline stopped the fall.",1
"While lifting a case from the floor, an employee suffered a back injury and was hospitalized.",1
"An employee was screwing a saver sub into tubing when the employee's left pinky finger was caught between the chain and saver sub, resulting in a finger amputation.",0
An employee was driving a forklift when it and an automated vehicle collided. The employee's right hand was smashed and broken between the two vehicles.,1
An employee was turning on a power press while trying to install a crimp ring when the crimping die amputated parts of the employee's right index and middle fingers.,1
"An employee was manually feeding boards into the planer to put a jointing edge along the long side of the boards. Their left hand slipped, bounced off the guard's edge, and contacted the cutting blade. The left ring fingertip was amputated up to the first knuckle.",0
An employee was grinding a part when their glove got caught on a flange and their hand contacted the grinding stone. This resulted in the partial amputation of the left middle finger.,0
"An employee was climbing down from a ladder while stocking light bulbs on a shelf. The employee slipped off the last step and fell to the floor, suffering a shoulder injury.",1
"An employee was cutting chicken with a parts cutting saw. The employee's hand contacted the saw blade, amputating the little finger.",0
An employee's left index finger was caught and amputated in the piercing machine.,0
"An employee was breaking a flange free from a pipe that was approximately 90"" in diameter. When the pipe flange broke free it smashed the employee's left foot against an immovable object.",1
"On December 4, 2018, an employee was walking with a dolly carrying boxes when an unmanned forklift struck the employee. The employee suffered a fractured pelvis.",1
"An employee was moving a gate valve to a different pallet. His left middle fingertip was caught between two hand wheels (one used to open and close that valve, one for another valve) and amputated.",0
"An employee was rigging down a well servicing rig. As the derrick was lowered, it severed his right index finger and thumb under the knuckle. He was hospitalized.",0
"An employee was demonstrating a single-man rescue kit. It is a product that allows an employee to escape from a bucket truck if the truck becomes inoperable. The kit includes a rope and a descender. The employee was to hook onto the bucket and to his harness. While descending, he fell to the ground and sustained a broken right leg.",1
"On December 4, 2018, an employee was getting off a forklift to dump a bin into a dumpster when the bin flipped back. It pinched a finger on the employee's left hand, causing the amputation of the fingertip.",0
"An employee was standing on a 10-foot extension ladder while winding a garage door spring.  The spring broke, causing the employee to lose his balance and fall off the ladder.  The employee suffered sprains in both hands and spinal compression fractures (L1-2 and T-12), requiring hospitalization.",1
"On December 4, 2018, an employee had repaired a hot water system line and it began to leak after it was turned back on. It was then shut off, and an adjacent line and pump were turned on. The employee went to find the serial number off the pump that had leaked; when he was in the area, the adjacent pump sprung a leak and sprayed 180-degree water onto him. His back, shoulder, and eye were scalded.",1
"An employee tripped and fell to the floor inside an elevator, injuring both shoulders.",1
An employee was stocking shelves. He turned to place an item on a shelf and suffered a broken left femur.,1
"An employee was cutting down a pepper tree from ground level using a chain saw which became stuck in a branch. While attempting to free the saw it engaged, kicked back, cut through his glove and lacerated his right palm requiring stitches.",1
"On December 4, 2018, an employee was dismantling and installing pallet uprights. The employee was struck by a narrow-aisle forklift being operated by the host employer Luk USA LLC. The employee sustained a fractured hip and injury to the pelvic area.",1
"A 16"" diameter pipe, being lifted with a crane, was lowered onto an employee's hand. The tip of his right thumb was amputated.",0
An employee was walking under a beam and struck his head.,1
An employee was changing a liquid propane tank on a forklift. Gas leaked from the tank and the employee suffered frostbite on the hand.,1
"An employee was removing plywood from a pallet rack when he slipped and fell. The wood cut his left hand (three middle fingertips) against metal shelving, resulting in the amputation of the three fingertips.",0
"On December 4, 2018, an employee was assisting the operator of a multi-blade cutting system in the woodshop. The employees were cutting down wooden barrels. The operator was adjusting the machine and struck the still spinning blade while removing a piece of wood causing a severe finger laceration.",1
An employee was cleaning a sand muller when their right hand slipped into the machine and the middle finger contacted the blade resulting in a fingertip amputation.,0
An employee was adjusting a part on a threading machine when their finger was caught between a clamp and v-block on the machine. The employee sustained a partial amputation of the right middle fingertip.,0
An employee was working from a 16-foot ladder wiring a light fixture; while doing so the fixture fell. The employee tried to catch it and fell off the ladder. The employee landed on the tile floor and sustained a broken arm.,1
An employee was moving materials and caught a finger between steel and concrete resulting in a left thumb amputation.,1
"An employee was working from a ladder performing repairs on a truck. As he stretched out from the ladder, he lost his balance and fell breaking both wrists.",1
"An employee was about to repair a module truck chain. The chain caught the employee's fingers, causing an amputation. The machine was running at the time.",1
An employee was moving a cart of waste cardboard when her finger was crushed between a swinging door and the cart resulting in a fingertip amputation.,0
An employee was using a pry bar to free metal trim scrap that had become lodged at the exit of a slitter. The weight of the 700-pound scrap caused the pry bar to strike and crush the employee's right thumb. The employee was hospitalized.,1
An employee was climbing up a ladder when it shifted and both the employee and the ladder fell to the ground. The employee sustained a fractured lower right leg.,1
"An employee used a chair to look for some books on the top of a cabinet that was approximately 7 feet tall. As the employee stepped down, she lost her balance and fell to the floor, breaking her upper right arm. She was hospitalized.",1
An employee was tending a sandblasting pot when he attempted to get the hose unstuck and it struck his hand. He then fell backwards and began convulsing. He was hospitalized with a burn to the back of the right hand and internal issues.,1
An employee was stocking 50-pound bags of sugar. A load had shifted during transport in the rail car; the pallet collapsed and the load fell over. The employee was struck by a bag and suffered a fractured hip and nose.,1
An employee was running the horizontal band saw. As the employee was pulling out the piece of cut tubing the saw blade caught the employee's glove and pulled his hand onto the cutting surface under the blade. The employee sustained the amputation of four fingers from his left hand.,1
"An employee was operating a mechanical power press and amputated the right index, middle and ring fingers.",1
An employee was guiding a steel beam during crane operations. His finger was fractured between a sidewall and the steel beam.,1
"An employee was inside a work zone, spotting a dump truck that was backing up to a milling machine. Another truck, coming from the other direction, ran over the employee's left foot with the passenger-side front tire as it passed. He suffered several fractures to the foot, and was hospitalized for surgery.",1
An employee was observing a truck bed being loaded with logs and other tree debris when a log slipped out of the grappler machine and then contacted the employee's right foot. He was hospitalized with a laceration to his right foot.,1
"An employee was preparing to remove a jammed spout from a spout block. The employee attempted to manually lift the spout block by pushing up on the cylinder underneath to get to the spout. The spout block came back down and caught his hand, causing a laceration and fracture. He was hospitalized. The machine was locked out and de-energized at the time.",1
An employee was pushed to the ground during a shoplifting event inquiry. The employee suffered a broken pelvis.,1
An employee was on a ladder helping to guide a 400-pound angle iron into place so he could weld it to the brackets on the precast wall. The angle iron hit a bolt and disconnected from the magnet that was attached to the rigging of the crane. The employee fell from the ladder to the ground and sustained a laceration to his head and bruising throughout his body. The employee was wearing fall protection.,1
"On December 5, 2018, an employee was walking across the shop when their back locked up and they fell to the ground. The employee was hospitalized with back pain.",1
An employee was discarding metal pieces into a bin when the metal bounced back and struck the employee's cheek. The employee was hospitalized with a fractured cheekbone.,1
"An employee was greeting customers at a grocery store entrance. While trying to help another employee push carts into the building, he tripped over his co-worker's feet and fell to the floor. He suffered cracked ribs and possible internal injuries.",1
An employee was exiting an aircraft when he slipped and fell sustaining a fractured hip.,1
"An employee was distributing parcels for delivery. 
The dock door was propped open with a pallet and the employee proceeded to unload parcels and carry them inside the building. The door started closing and the employee lunged toward the dock door to catch it. The employee then tripped on the pallet and fell forward onto the concrete dock resulting in a possible broken orbital bone and fracture to the mandible as well as a bruised forearm and bruised elbows.",1
"On December 5, 2018, an employee was operating a compound miter saw when their glove was caught in the machine, pulling their left thumb into the machine and causing a partial amputation.",0
An employee was driving a pallet jack when it stopped suddenly. The employee lost balance and fell to the ground fracturing the left hip.,1
"On December 5, an employee was moving a bundle of 25 square pipes with an overhead crane. He hooked the bundle at each end. When he lowered the bundle, the pipes, which had separated, pinched back together. He was using his left hand to guide the load and his fingertip was caught between the pipes when they went back together, resulting in a left ring fingertip amputation (tissue only).",1
"An employee was filling a liquid storage tank. When the employee tried to open the filter by the pump, hot waste beer sprayed onto the employee's arm, causing a second-degree burn.",1
"On December 5, 2018, a temporary employee was working at the Interline Brands, Inc. warehouse when her foot was run over by a powered industrial truck. The employee was hospitalized.",1
"An employee was making photos of finished product in the yard before loading when the employee stepped backwards, tripped on level ground, and fell, suffering a leg fracture.",1
"An employee was lifting a bucket of spilled fertilizer into a spreader tractor when the employee fell from the side of the tractor and hit the ground, suffering a concussion that required hospitalization.",1
An employee was placing roofing supplies on the conveyor of his delivery truck when his hand slipped on the conveyor and his fingertip was amputated.,1
"An employee was lifting a metal plate with a hoist when it fell, striking the employee's right ankle. The employee was hospitalized, requiring surgery and stitches.",1
"An employee was loading vehicles in a loading area. When a choke was removed, a vehicle struck the employee, fracturing the employee's tibia.",1
"An employee was mopping the floor when he attempted to prevent a door from closing, slipped, and fell to the floor, injuring his left hip.",1
An employee was struck by an 800-pound coil that was on a spindle when it fell resulting in injury to the left leg and knee cap.,1
"An employee was using a hammer drill when his glove became entangled in the drill, causing an amputation of his left middle fingertip.",0
"An employee tripped on a box while walking through a door, falling to the floor and fracturing the right hip.",1
"While setting up a CNC router, an employee contacted the cutting head resulting in the amputation of the left middle fingertip.",0
"On December 5, 2018, an employee slipped and fell on the polished floor of the manufacturing plant and broke his arm, requiring hospitalization.",1
"An employee was in the grain elevator working to un-choke an airlock using an air gun with a long extension. In the process, the safety tip on the air gun contacted the airlock causing the air gun to twist. The employee's right index finger was caught between the trigger and the body of the air gun, resulting in amputation of the fingertip.",1
"An employee was on a ladder in a stock room, using a top stock cart. While descending the ladder, she fell from the last rung to the floor. She landed on her side, breaking her hip. She was hospitalized.",1
"An employee was exiting a roll-on/roll-off ship. While walking down the side ramp he slipped and fell, landing on the steel ramp surface an breaking his left hip.",1
An employee was moving a defective tank with a PIV walker. The tank rotated to the side and the handle of the PIV knocked him to the ground. The employee sustained a fracture to his right shoulder.,1
"An employee was preparing to clean a neck skinner machine when the employee's hand was caught in the machine rollers, resulting in finger amputations.",0
"An employee was removing a concrete barrier wall. He had his hand on the bolt that joins two pieces of wall together, trying to remove it, when the backhoe shifted slightly and pinched his right middle finger. He pulled the finger out of the pinch point and ripped the skin off the end. The finger was amputated at the first knuckle.",0
An employee was using sandpaper strips to polish a part on a rotating parts polishing machine. The employee's gloved hand was caught by the sand paper and was drawn into the machine resulting in the amputation of the right index finger up to the second knuckle.,0
Employees were purging an epoxy supply hose with MEK (paint thinner) inside an unventilated 4-wheel tow trailer. A torpedo heater in was in use at the time and ignited the MEK. Two employees received burns to the hands and face. A third employee inside the tow trailer was uninjured.,1
An employee was exiting from a scaffolding unit and transferring to a fixed ladder when his foot slipped on the top rung of the ladder. The employee attempted to grab the ladder while falling and dislocated both elbows. The employee was hospitalized for surgery.,1
"An employee was walking through the store, tripped over a box, and fell fracturing their hip. The employee was hospitalized.",1
An employee was clearing a shaft in a confined space when a microbiocide chemical landed in their eye. The employee was hospitalized for chemical burns to the eye and back.,1
An employee was closing a trailer door and smashed their left hand in the door resulting in a partial amputation of the left middle finger.,0
"An employee was standing approximately 10-15 feet from a worker that was hammering on a sheer pin. The pin snapped off and flew into the employee's eye, having passed between his cheek and safety glasses.",1
An employee was working below a rig platform. A rod transfer device was dropped from the  platform and struck the employee in the face. The employee sustained a fracture jaw and other facial bones.,1
An employee was reversing an electric pallet jack into an empty wooden pallet when he slipped off the pallet jack and his left foot was run over resulting in a partial amputation of his big toe.,1
An employee was operating a pallet jack in a refrigerated warehouse. The pallet jack malfunctioned and backed into racking. The employee sustained a broken pelvis.,1
"On December 6, 2018, an employee parked a forklift behind a trailer on the loading dock, got off the forklift and was reading a shipping manifest. Another forklift backed out of a trailer and pinned the injured employee between the two forklifts. The employee suffered a broken leg and was hospitalized.",1
"An employee was using a hoist as part of the cleaning process for a reaction vessel. While moving the basket/screen that sits atop the vessel, a hoist strap on the spreader bar caught and then sprang loose. The employee was struck in the face fracturing maxillary and nasal spine bones and causing a laceration.",1
"An employee had hooked his powered industrial vehicle (PIV) onto an empty rolling rack that is used to haul tire components. While attempting to pull it out, the tip of his right index finger was smashed between the empty rack and the light pole on the PIV. The right index fingertip was surgically removed.",0
"An employee was painting structural beams on a cart. When it came time to flip the beam with the help of other employees, the beam pinched the injured employee's left index finger between it and the cart causing a partial amputation.",0
"While attaching a trailer attachment to a low-boy trailer, an employee's  left index finger was  smashed between the attachment and the low-boy trailer's connectors resulting in amputation of the first knuckle.",0
An employee was hospitalized after both legs were lacerated with a drill bit.,1
"A field tech was working on a ladder on a service call when the messenger cable broke causing the employee to fall 20 feet to the ground below. The employee sustained a fractured pelvis, elbow and shoulder.",1
While walking into work an employee slipped and fell on ice and was hospitalized with a fractured left ankle.,1
An employee was moving a panel on a sliding panel dry-erase board to access the panel beneath it when the board fell on the employee. The employee was hospitalized with stress fractures to the right hip and two fractures in the lower left leg.,1
An employee was sliding boxes along the lobby floor. The top box was lighter than she expected so as she pushed the top box she fell to the floor along with the box. She landed on her side and suffered a broken femur.,1
"A forklift's brakes malfunctioned, resulting in an employee being struck by the forklift. The employee was hospitalized with an injured pelvis.",1
An employee caught an edge and fell while testing a feature in a terrain park. The employee's right arm was broken.,1
An employee had been climbing or positioning himself on rebar and fell approximately 10 feet to the lower level decking. The employee sustained a broken femur.,1
"While operating a rotary drill rig, an employee's right little finger was caught on a winch cable and amputated.",0
An employee was trying to unchoke a machine when their left middle finger was caught in a chain resulting in a fingertip amputation.,0
An employee was working from an aluminum telescoping scaffold approximately 12 feet high. The employee lost his balance and fell to the ground. The employee sustained a fractured right wrist requiring surgery. Fall protection was not worn at the time.,1
An employee was walking near staging on top of a roof and fell 14 ft. through a hole between the staging and the ladder. The employee sustained 3 broken ribs and a back injury.,1
An employee was removing an end bell (round heavy piece of steel) from a chiller unit. The end bell slipped and fell on the employee's foot crushing bones that required surgery.,1
An employee performing preventative maintenance on an air handler. He was about to check the belts that rotate the shaft when the belt amputated his right middle fingertip.,0
An employee was operating a mini-loader when it tipped over and fell on top of them breaking their left femur.,1
"An employee had just welded a clip onto the side of a tube column and then started to weld a second clip. The employee leaned back against the hot clip that had just been completed, and the employee's shirt caught on fire. The employee was hospitalized with burns to the back.",1
An employee was standing next to his forklift when a second forklift backed out of a trailer and struck him. The employee's leg was broken.,1
"An employee was in the parking lot gathering shopping carts. A car struck the shopping carts and the employee was crushed between the shopping carts and a parked car. The employee was bleeding from the head, sustained a back injury and one leg was twisted.",1
An employee was using a hydraulic submersible pump to clean a sewer main. The pump became clogged with rags. The employee suffered partial amputations to two fingers while clearing the clog. The pump was still operating at the time.,1
"An employee was welding a rack together. The welding lead was draped over another rack which he had just finished welding together and had placed onto its side. As the employee was welding, he pulled on his lead and the rack it was draped over tipped and fell onto his lower left leg causing a fracture.",1
An employee was framing in a wood beam. The hoisting strap from a crane got stuck on his 8-foot ladder and pulled the ladder out from under the employee. The employee fell to the floor and was hospitalized with a fractured wrist.,1
"An employee was reeling up a pneumatic hose, lost balance and fell, hitting their lip on the hose reel handle. The lip was cut and required surgery.",1
"An employee was walking from one department to another when he slipped and fell to the concrete floor, breaking his hip.",1
A temporary employee was cleaning tables and pulling a cart that had multiple tables loaded onto it. The tables shifted and collapsed onto her. She was hospitalized with pelvic fractures.,1
An employee was using a horizontal bandsaw. Their glove became caught pulling their hand/thumb into the blade. The employee suffered the amputation of the right thumb tip.,1
An employee fell from a ladder and injured her knee.,1
An employee suffered electrical burns while securing a panel to the front of a panel box.,1
A Disney employee was servicing a noisy washing machine when something at the back of the machine caught his hand. He suffered an amputation injury to the right ring finger.,1
"While repositioning his anchorage point (retractable safety device), the employee fell approximately 30 feet. The employee sustained a pelvic fracture, a broken arm and a spleen injury.",1
An employee was operating an electric forklift in the facility and backed into a control box. The employee's right index finger was caught between the forklift's overhead support and the control box resulting in amputation to the second knuckle.,0
An employee was performing maintenance on a pipe when it broke and sprayed hot water onto the employee causing burns.,1
"An employee was unclogging a drain using a rotary cable. The cable snapped back and hit the employee's left hand, causing a laceration to his left middle finger and a partial amputation to the  ring fingertip.",1
"An employee was moving drywall when the weight shifted and the drywall fell on the employee, resulting in a knee injury.",1
An employee was performing a routine check of the retainer system. He opened a valve to flush the solution back through the closed-loop system into the tank when a part of the valve failed. The heated solution struck the employee causing second degree burns to the right side of the torso and third degree burns to the right forearm.,1
"While scanning at the rear door of a postal truck, an employee tripped over a pallet jack that was on the lift. The employee fell against the railing of the lift and sustained fractured ribs.",1
"An employee slipped on a rag, fell and broke their knee.",1
An employee was walking on the tarmac to remove a cone from the tip of an aircraft's wing when they slipped on ice and fractured the right ankle.,1
An employee was operating a tugger when their left index finger was caught and amputated between the tugger and material.,0
"On December 7, 2018, at 6:15 a.m., an employee delivered a package to a residential customer's door. The employee then slipped and fell on the customer's driveway, resulting in a fractured right leg.",1
An employee was operating a hydraulic press and amputated his left thumb above the knuckle.,0
An employee was walking down the stairs and tripped. The employee fell down several steps and sustained a broken ankle that required surgery.,1
A custodian was working from a portable scaffold system approximately 15 feet above the floor of the gym to repair lights in the scoreboard. Two additional employees were holding onto the scaffold at floor level. The employees tried to move the scaffold while the custodian was still on the platform. The scaffold tipped over and fell to the floor. The custodian and one of the employees on the floor suffered injuries. The custodian was hospitalized with a fractured knee cap and heel. The employee on the ground was treated at a hospital and released.,1
"An employee on a loading dock took a step backwards to load a package onto a truck that had been backed up to the loading dock. However, the truck had pulled away and the employee fell 50 inches to the pavement, resulting in a broken wrist, elbow, hip, and pelvis.",1
An employee sorting paper and plastic recyclables suffered a heart attack.,1
An employee was cutting a tree's root ball using a chain saw. The tree moved and pushed him against another tree resulting in fractures to both legs.,1
An employee was working to clear a piece of trash from a roller on a pallet sorting machine. The roller control actuated causing a piece of plastic trash to wrap around the top part of the employee's left ring finger and pinch it. The employee sustained a partial amputation to the left ring finger just below the nail bed. The roller was not guarded at the time.,0
An employee was feeding the hose for the air dryer and hit their elbow on a frame bracket. The employee sustained an elbow bruise and infection.,1
"An employee was climbing down into a basement egress window using a 6-foot A-frame ladder between the bottom of the window and the floor. He was on the second step from the bottom and fell to the concrete floor, resulting in a hip fracture.",1
"An employee was trying to determine why an air compressor was leaking oil. While the employee had his arm inside a shroud covering a fan, the air compressor cycled on, causing the amputation of the employee's right arm below the elbow.",1
An employee was pulling service power wire through an occupied conduit on a utility pole and contacted a live 120-volt service resulting in burns to both hands.,1
An employee was on an order picker in an aisle when he fell approximately 8 feet to the ground and sustained a laceration on his forehead and a fractured right wrist.,1
"An employee had been installing an approximately 52-foot long hydraulic jack into a PVC pipe in the ground. When there was about 5 feet of jack remaining, a pipe clamp broke causing the jack assembly to fall vertically. There was an approximately 2-foot square piece of metal plate attached to the top of the jack assembly. The employee's right arm was caught between the jack assembly's metal plate and the PVC pipe. The employee sustained crushing injuries including multiple fractures and the amputation of the arm from the elbow down.",1
"An employee was dumping a tub of potatoes onto a conveyor. He lifted his foot to help lift the tub and brought his foot down onto the underside of the conveyor belt, causing the employee to fall. His right foot was then caught and crushed in the roller.",1
An employee had been heating a ball joint with a torch. A 2-inch piece of steel broke off and hit the employee in the chest.,1
An employee working on a forklift reached out to the forklift mast and his hand was crushed by the mast. The employee sustained broken bones in the left hand.,1
An employee was placing a board on a chop saw and lost their footing. The employee extended their left arm to regain balance and contacted the rotating blade of the chop saw resulting in an injury to the left middle finger. The end of the finger had to be medically amputated.,0
"An employee was using a manual slicer to slice potatoes. A potato got jammed in the slicer and when the employee removed the potato, the slicer came down on their right middle finger resulting in amputation of the fingertip.",1
"An employee was operating a forklift to move a bundle of steel from a truck. The bundle shifted on the forks. The employee then got off the forklift to adjust the bundle and the bundle shifted and began to fall off the forks. The employee attempted to get out of the way, but was struck by the bundle and sustained a broken left leg that required hospitalization.",1
An employee was cleaning out a piece of equipment prior to restarting. The palletizer noise dampening lid dropped on the employee's right thumb after the shock absorber failed resulting in amputation of the thumb.,1
"An employee was hooking up the crane to the lifting collar. The pin would not enter the holes on the lifting collar. When the employee checked the holes for obstructions, the collar shifted and the tip of his left thumb was amputated.",0
An employee was performing maintenance on a machine when their left index finger was caught and amputated between the piston and the back of the barrel.,0
An employee was working to connect a sewer line (sewer tap) to a residential building. The wall of an 8-ft. ditch collapsed and the employee was pushed back against the other wall causing a fractured rib and fractured vertebrae between the shoulder and neck.,1
An employee was operating a pull-behind tugger and tripped over the forks of another forklift. The employee fell breaking her elbow and ankle.,1
An employee was lifting an aluminum tank when their right index finger was caught between a chain and the tank. The employee sustained a partial amputation of the right index fingertip.,0
An employee tried to stop a fire associated with food burning in the kitchen oven. The employee inhaled smoke and was hospitalized with difficulty breathing and dizziness.,1
"An employee was getting ready to load a forklift with a 55-gallon drum of hydraulic fluid. While the employee was manually pushing the forks into the pallet, the forks shifted and his right little finger was caught between the forks and the pallet resulting in amputation of the fingertip.",0
"While an employee was scanning bills in the dock area, pallets that were on the forks of a forklift tipped over and fell on the employee. The employee sustained possible broken ribs.",1
"Two employees used lock out/tag out (LOTO) procedures to change carrier chains. The chains became stuck. When one employee tried to release the chains, stored pneumatic energy was released catching the employee's right ring finger and crushing it to the first knuckle resulting in a partial amputation.",0
An employee was servicing a pump and replacing the plunger pump when their left hand was caught between the plunger and piston. The employee sustained amputations to the tips of the middle three fingers and the tip of the left thumb.,0
An employee tripped over a cart and fell to the floor. The employee was hospitalized for a fractured hip ball.,1
An employee was entering the plant on a windy day and the door slammed onto his right middle finger resulting in a partial amputation.,0
An employee was climbing over a scaffold handrail to access a pipe rack when the employee fell approximately 5 feet to a lower level. The employee landed on his right side and sustained fractured ribs and a collapsed lung.,1
An employee was grinding castings on a large snag grinder. The part slipped and the employee's fingertip contacted the grinding wheel resulting in a severe abrasion requiring a surgical amputation.,0
"An employee was operating a machine and amputated approximately 3/8"" of the tip of his right middle finger.",0
"An employee was on the safety platform on top of a tank car tightening up the bolts on a hatch with a ratchet. While turning the ratchet, the socket came off the bolt causing the employee to fall backwards approximately 15 feet to the ground. The employee was hospitalized for a back injury.",1
An employee was using a torch under a vehicle when the fuel line exploded and a fire occurred. The employee was hospitalized for burns.,1
"An employee had shown a car to a customer. After exiting the car, it rolled and struck the employee. The employee was hospitalized with a broken leg.",1
An employee was leaning on a machine in the production area when his hand became caught in the machine. He sustained fractures to his thumb and index finger.,1
An employee was working with a wire sizing machine when a spool of wire became unraveled and the employee's finger was caught behind the spool resulting in a partial amputation.,0
An employee was moving filing cabinets during hurricane cleanup at a job site. A second employee was moving filing cabinets that were on a dolly. The filing cabinets on the dolly tipped over and fell onto the first employee pinning him against a wall and fracturing his left leg. The injured employee was hospitalized and required surgery.,1
"An employee was cleaning the belt on the meatball line. While removing a meatball from the moving metal conveyor their glove was caught in a nip point and the employee's left pinky finger sustained a fracture, torn ligaments and a severe laceration.",1
"At 11:30 a.m. on December 8, 2018, a rural mail carrier slipped on an icy patch while walking through a parking lot toward an apartment building. The carrier fell to the ground, suffering a broken right ankle.",1
"An employee exited their car in a parking lot and slipped and fell on a patch of ice, breaking their right ankle.",1
An employee was helping to move a pipe using a tagline. The pipe was being lifted by a forklift. The pipe began to swing and the employee placed a hand on the pipe to stop it from swinging. The employee's pinky finger became caught between the pipe and one of the forks. The pinky finger was surgically amputated.,0
"An employee was moving a well head blow out preventer (BOP) stack and the chains slipped, amputating approximately 3/8"" of the employee's left index finger.",0
"An employee was walking backwards, pulling a jack dolly when the employee fell backwards on his back and the dolly struck his legs.",1
An employee was installing master bushings during the casing running operation and suffered a crushing injury to the left index fingertip resulting in amputation of the first digit.,0
"An employee slipped in the cooler, hitting their right rib cage on the vertical lip of the floor chain conveyor pan. The employee was admitted to the hospital with a collapsed lung.",1
An employee was moving items from an industrial washer to an industrial dryer. The employee grabbed the laundry with her right hand. The washing machine kept spinning and the employee's right arm got stuck in the laundry resulting in a dislocated elbow and torn ligaments and tendons.,1
"On December 9, 2018, an employee operating a stand-up pallet jack in the stand-up pallet jack parking area backed up his machine and struck another parked stand-up pallet jack. His foot was pinched between the two pallet jacks. The employee was hospitalized with a lacerated and broken left big toe.",1
"About 90 minutes after an employee had completed the processing of an inmate he became unresponsive and was hospitalized, apparently due to an exposure to fentanyl.",1
"On December 9, 2018, at approximately 11:00 AM, a maintenance employee of Toledo Elevator Company responded to a call to service a downed elevator. The employee tripped and fell down three flights of stairs. He was found at the bottom of a stairwell near the elevator shaft with multiple head lacerations, partial loss of an ear, and a fractured C-5 vertebra. The employee was hospitalized.",1
"While an employee was delivering mail, a dog located at a residence jumped into an open window of the postal vehicle and bit the employee on the nose causing a loss of cartilage and a nose fracture.",0
"An employee was conducting a test on a pipeline. While pushing a ""pig"" through a 20"" pipe using compressed air, the steel door at the end of the pipe was blown off and struck the employee causing a broken arm requiring hospitalization and surgery.",1
A forklift got stuck in the loose gravel outside the facility. It began to fall over while pulling it out of the loose gravel using a yard truck. The forklift operator's left hand was crushed between the roll over protection cage and the ground resulting in the amputation of three fingers. One finger was reattached.,0
An employee fell while walking to the office door and sustained a broken lower right leg.,1
An employee was walking across a tractor trailer flat bed when his left leg gave out causing him to fall and fracture his left hip.,1
"On 12/10/2018, an employee was replacing metal roof panels on a steel framed building. There was an open section in the middle of the roof where the old panels had been removed. The employee went to step on a metal purlin to walk across the opening and lost their footing. The employee fell about 12 feet through the opening and landed on top of a tractor cab that was parked inside of the building and then fell off the tractor about 12 feet onto the concrete floor. The employee was hospitalized with a fractured pelvis.",1
"An employee was repairing an RV. The employee was using a flashlight and it fell inside the engine. As the employee was retrieving the flashlight, their right hand was caught in the rotating fan blade. The employee sustained amputation injuries to his right pinky, ring, and middle fingers.",1
"An employee was using an upcut saw. It activated while her left hand was on the platform, amputating part of her thumb and forefinger.",0
An employee had been loading a gas cylinder containing chlorine gas. During loading the cylinder fell and struck the employee in the chin and the valve of the cylinder opened. Chlorine gas was then inhaled by the employee.,1
"An employee was stepping down from an elevated platform, that is 30 inches above the floor, onto two stacked pallets that had two pieces of cardboard stacked on top of each other on the surface of the top pallet. The employee placed his right foot on a piece of cardboard that was not aligned with the pallet. His left foot slipped and he fell backwards, hitting his head on the concrete floor. The employee sustained head injuries including hemorrhagic contusions with associated subarachnoid hemorrhage, subdural hematomas, and a fracture of the occipital bone.",1
An employee was hospitalized for surgery after sustaining a crushing injury when their hand was drawn into a conveyor belt.,1
An employee was in the entrance area moving a cart back into place when a second employee bringing in carts from the parking lot came in and bumped the first employee from behind. The first employee fell to the floor and landed on her side. The employee's wrist and hip were broken.,1
"Two employees were working at a height of 35 feet to perform steel erection. The employees were using a horizontal lifeline for fall protection. They were using the stanchion from the lifeline for leverage when pushing beams with a pry bar. One of the fall protection stanchions that was attached to a beam popped off, and the horizontal lifeline pulled the employees to the ground. One employee struck the concrete half-wall of the parking garage next door and then fell down to the ground. The employee sustained a broken right leg, lacerated liver, heart bruise, and broken ribs.",1
An employee fell 7 feet from a ladder to the floor and sustained a fractured hip.,1
An employee fell from an 8-foot ladder while repairing a freezer door. The employee sustained a right tibia fracture.,1
"An employee was driving a cement mixer. Upon entering the facility, the driver was unable to see the facility entrance due to the elevated lights and veered into a ditch. The employee was hospitalized for brain swelling.",1
"An employee was stepping down out of his yard truck and missed the bottom step of the truck. The employee fell and struck the side of the truck while falling, fracturing four ribs.",1
"An aircraft mechanic was conducting maintenance on an aircraft from the ground. When he extended a boarding ladder, which is built into the aircraft, his left thumb was caught in pinch points and amputated from the nail to the knuckle.",0
An employee was assisting another employee with loading package carts onto a delivery truck when his finger was smashed between the wall and the cart. The employee's fingertip was amputated. The fingertip was later reattached.,1
An employee was carrying a propane tank for a tow motor when he slipped and fell. The tank landed on his hand causing a severe finger fracture.,1
An employee fell from a tree to the ground during trimming operations and sustained an L1 vertebra fracture.,1
"An employee was standing on stilts installing acoustic ceiling grids. He saw a ladder leaned on a corner and a 3-foot diameter plastic ring on the ground. When he took a step, one of the stilts got caught against the ring throwing the employee off balance. As he attempted to regain balance with his other foot, the employee stepped on a piece of conduit lying on the ground causing him to slip and fall. The employee sustained a right femur fracture.",1
An employee's finger was lacerated by a circular saw while cutting plywood.,1
An employee sustained a severe leg injury when a steel splice plate was dropped from an overhead crane.,1
"An employee was bitten by a cat on December 9, 2018, while cleaning out the adoption kennel. The next day, the employee noticed red marks on his arm and was hospitalized for a bacterial infection.",1
An employee was plugging a welder unit into a wall outlet when they were shocked and their hands and wrists were burned.,1
An employee was operating a staple gun and sustained injuries to the left thumb requiring surgery. The employee was hospitalized.,1
An employee was operating a lathe with sandpaper to remove burrs from a shaft. The employee's  glove was caught between the spinning shaft and the sandpaper resulting in a right index finger amputation.,0
An employee was carrying supplies into a room when they slipped and fell breaking their leg in two places.,1
An employee was working from a ladder on the second floor of a residential house. There was a hole in the floor approximately 3 inches in diameter in the area where the ladder was set up. The ladder shifted to the side and the employee fell 4 feet to the wooden floor. The employee sustained a head injury and was hospitalized.,1
"On December 10, 2018, an employee's foot was run over by a forklift resulting in fractures requiring hospitalization and surgery.",1
"An employee was cleaning the two grinders in the grinding room as part of the daily cleaning schedule. The employee was standing on top of stairs at the top of the grinders. The employee slipped and fell, catching his right arm in a grinder. As the employee was trying to right himself, the grinder was activated. The employee sustained multiple fractures to his right arm.",1
An employee suffered a back injury while working near a wood chipper.,1
An employee was cutting a rack of horizontal piping with a with a reciprocating saw while standing on the floor. He freed both ends of the pipe and the pipe fell onto his right leg breaking the lower leg.,1
An employee was inspecting a folder when three fingers on their left hand were caught in the press and amputated.,0
"An employee was part of a work crew that was conducting logging operations. The employee was cutting down a tree. When he had completed the cut and the tree started falling, a branch broke off and fell onto the employee causing a fractured vertebrae. He was hospitalized for surgery.",1
An employee was walking inside a new residential construction home when the floor joist broke under him and he fell 10 feet to the concrete below. The employee sustained a broken collar bone and bleeding from the head.,1
An employee fell from a roof and broke his leg and heel.,1
"An employee was climbing a ladder on a rail car and missed a rung, falling backwards approximately 8 feet to the ground and fracturing the left wrist and tail bone.",1
An employee was pushing a rolling cart when it tilted and her finger was jammed. The employee's right pinky finger was amputated.,0
"An employee fell 14 feet off the side of a ladder to the ground while taping a window on a new residential construction. The employee was hospitalized with strains to both shoulders, a neck strain, and a cut on the head.",1
An employee was installing an upper coupler on a trailer and utilizing a forklift to support the piece. The coupler came down and smashed his left hand middle finger. The fingertip above the top knuckle was medically amputated.,0
"An employee was working on a bulldozer's roller frame. While trying to get to a track adjuster by using a pry bar to turn the idler, the pry bar slipped as the employee was pulling downward. The employee's left boot became caught on the roller guard causing his weight to be placed on his left foot as he fell backwards resulting in a broken left ankle.",1
"An employee was working in the freezer storage section of the facility for 12 hours. The next morning, he was hospitalized for treatment of frostbite on the right index finger.",1
"An employee was on an order picker, moving a pallet from a rack to the order picker, when his right little finger was caught between the pallet and the order picker. The fingertip was amputated.",0
An employee sustained a fractured right hip and right shoulder pain when they slipped and fell to the ground from a concrete mixer truck's ladder.,1
An employee got up to walk away from a table in the break room. Her foot became caught in the chair she had been sitting on and caused her to fall to the floor. The employee sustained a fractured right hip.,1
"An employee was descending a stairway when he fell, breaking two ribs. He was hospitalized.",1
An employee was cleaning the ham pumper in the ham room. They were getting off the 3-foot high platform and stepped on the ham pumper's motor cover. The employee then slipped and fell hitting the cover and landing on the floor. The employee sustained a collapsed lung and a rib fracture.,1
"An employee was guiding an excavator to load a dump truck. The employee's hand was caught between the excavator bucket and the top rail of the dump truck, resulting in an injury that required hospitalization.",1
An employee's feet were burned from exposure to liquid nitrogen during delivery.,1
"An employee working as a ground person was helping a second employee cut down trees along the power lines. The first employee was pulling a tree with a rigging line while it was being cut by the second employee using a chainsaw. While retreating, the first employee tripped over a fence and was struck by the tree. The employee was hospitalized with a broken left hip, and a bruised/lacerated left leg.",1
"An employee accessed a platform that was 6.5 ft. off the floor to clean a drum on the press. After the employee was finished cleaning, he stepped off the side of the platform and fell to the floor below. The employee sustained a laceration, contusion, and a broken hip.",1
"An employee fell through an opening between a loading dock's plate and the wall, suffering an internal injury. The employee was hospitalized.",1
An employee was exiting a yard horse/terminal tractor when he slipped off the top step and his knee contacted the edge of the metal step. The impact severed the lower patella tendon and surgery was required.,1
"An employee was working from a ladder, lost her balance and fell to the ground hitting her head on a conveyor belt and then landing on her back.",1
An employee had been washing and wiping down the pie making machine when his left hand was caught in the machine's chain and sprocket. The employee sustained a severe laceration to three fingers on his left hand.,1
An employee was repairing the control panel on the radiation therapy system. The employee bent down to pick up a dropped tool and their left hand was caught in the moving gantry causing a partial transphalangeal amputation of the middle finger.,1
"A deck engineer was using an endless loop rope to moor a tender vessel to a dredge. The rope was secured to the port side cleat at the stern of the vessel. The dredge was in its cut, moving away from the vessel. As the engineer brought the rope over the cleat, a finger on his left hand was caught between the cleat and the inside of the rope. The fingernail and flesh from the first digit were amputated.",1
An employee fell while retrieving Christmas decorations.,1
"An employee caught her foot on a chair and fell to the floor, landing on the right knee.",1
"An employee was guiding a rod into the tongs. Once it was placed in the tongs, the wind pushed the rod toward him. To prevent the thread from stripping, he slightly pushed the rod away from himself. Then the rod started rotating clockwise and the employee's glove became caught around the rod. His right hand fingers were pushed back, dislocating two fingers.",1
"While walking to the breakroom an employee fell to the ground, hitting her head and injuring her hip, which required surgery.",1
A bucket loader was on an incline in front of a conex box. The loader rolled down the slope and struck an employee on the right foot causing a laceration.,1
"While attempting to reposition a long tubular with a flange welded onto it, an employee's finger became caught between the flange and the rig floor. The employee sustained an amputation to the right ring fingertip.",1
"An employee was stepping down from a powered floor scrubber and tripped, falling to the ground and sustaining a broken femur.",1
"An employee was stocking shelves when she tripped on a box on the floor. Her head struck a shelving unit; she suffered a laceration to the right eye, as well as injuries to her right hip and right wrist.",1
An employee fell 18 inches from a conveyor to the floor and was hospitalized for a broken hip.,1
An employee was riding on a forklift when his left leg was crushed between the truck and a pole. The leg was broken.,1
An employee was using a torch to cut a welded piece of material when it fell on her left hand. The employee sustained third degree burns and lacerations to the top of the left hand that required surgery.,1
A maintenance employee was hospitalized after a brake on a horizontal grain conveyor ruptured and projected a metal shard into his left upper leg.,1
"At about 8:10 a.m. on December 11, 2018, an employee was adjusting material while on the bed of a flatbed truck. The employee slipped on frost and fell off the truck bed, landing on their feet on the ground (about 4 feet below) and breaking their right heel. The employee was hospitalized for surgery.",1
An employee was performing maintenance on a drag chain conveyor. The equipment started and the employee was struck by the drag chain paddles causing fractures to both legs that required surgery and two fractured ribs. The conveyor was not locked out at the time of the incident.,1
"An employee was pushing a cart when his right pinky finger became caught between the cart and a pole, resulting in an amputation.",1
An employee was working on the rig removing rods with the aid of a cable. A rod hit the top of the rig and the cable broke. This caused a block to strike the upper right leg of a second employee who was in a basket. The injured employee was hospitalized with a broken leg.,1
"An employee was fabricating a mount for a conveyor cylinder when he discovered a burr on the short side of a 3-inch by 5-inch piece of metal. He moved to the pedestal disc grinder to remove the burr (still wearing his welding gloves), put the metal down on the rest, and pushed it against the disc. The downward motion of the disc caused the metal to flip up. His right thumb contacted the disc and was pulled down between the grinding disc and grinder rest, suffering an avulsion.",1
"While unloading a freight trailer, an employee was struck by a load retaining bar that had been knocked over. The employee suffered head and right shoulder contusions.",1
An employee was inspecting vehicles on railcars. The employee lost his grip and fell approximately 12 feet from the roof or a railcar to the ground. He sustained a left arm injury and a broken left hip.,1
An employee was helping to tie steel rebar for a generator's concrete pad. The employee was holding rebar as another employee tied steel using tie wire. When the extra tie wire was cut it popped up and grazed the employee's left eye causing an eye laceration.,1
"On December 11, 2018, an employee was exiting a truck when his foot slipped off the truck's step and he fell about 4 feet to the ground. The employee was hospitalized with rib fractures and a lacerated spleen.",1
An employee was operating a fuel-fired heater in an enclosed room when he passed out and struck his head possibly due to carbon dioxide exposure. The employee was hospitalized.,1
"An employee was struck by a metal plate that was dislodged from a crane. The employee was standing approximately 20 ft. away and sustained multiple injuries to the head, neck, and body.",1
"While walking, an employee slipped on oil and fell. The employee sustained a broken arm.",1
An employee removed a rare earth magnet during maintenance activity in the corn processing operation. The magnet was placed on a table that attracted the magnet and his finger was caught between it and the table causing a partial amputation.,0
"While an employee was replacing a valve using a plumber's wrench, the wrench slipped from his hands, causing the employee to lose his balance and fall onto his knee from a step approximately 12-18 inches high. The employee's lower leg was broken.",1
An employee was cleaning metal with a naphtha solvent when a spark from a nearby welder caused the employee's clothing to ignite. The employee sustained burns to the face and respiratory system.,1
"An employee was operating a cordless circular saw to cut a piece of 2x6 wood when the battery started to die causing the saw blade to get stuck in the wood. The employee pulled the saw out and in doing so, the saw kicked back while the blade was still spinning thereby amputating his left pinky above the first knuckle.",0
"An employee was repairing a conveyor line. While performing the repair, the conveyor line started and the employee's thumb was caught in the chain and sprocket causing a partial amputation of his thumb.",0
"An employee was walking down the staircase, turned to talk to a student, lost balance and fell down the stairs. The employee sustained an injury to the back of the head and clavicle.",1
An employee was replacing a left hand drive on a bulldozer using a boom truck and suffered a back injury.,1
An employee was at the dock delivering materials using a pallet jack. The wheel of the pallet jack fell into a gap between the dock plate and the truck. As the employee was pulling on it to get it out a part of the skid broke and the employee fell injuring his right leg.,1
"On December 12, 2018, a maintenance technician was performing piping work on a rail car when approximately 85 pounds of chlorine gas was released. Another employee in the area breathed the chlorine and was hospitalized for acute respiratory problems.",1
"On 12/12/2018, while working on a patient's bed, a cotter pin was pulled which collapsed the bed onto an employee's finger, amputating the left ring fingertip.",0
An employee was mixing and spraying exterior paint throughout the day and cleaned equipment at the end of their shift. The employee then suffered redness and swelling to the face and neck.,1
"An employee was trying to get back onto a forklift when his leg was smashed between the forklift's side and a support column. His left hip and thigh were lacerated, and he was hospitalized.",1
"An employee working from a bucket truck to install a neutral wire on an existing power line sustained arc flash burns to the right hand, arm and right side of the face. The employee was hospitalized.",1
"An employee sat in a wheelchair while speaking with a patient. When the employee stood up, they tripped over the wheelchair's leg rests and fell fracturing a hip.",1
An employee was assisting in hydroblasting operations and received a laceration to the left calf when the water cutting machine malfunctioned.,1
An employee was removing a chain block from a steel structure while standing on a scissor lift. The scissor lift was blown over while fully extended and the employee suffered broken ribs and a punctured lung.,1
"An employee was removing a sampling tube from the soil extruder. During the extraction, the employee's left index and middle fingers were caught between the extruder and the tube resulting in partial amputations to both fingers.",1
An employee was changing a propane tank on a forklift outside the shop when another forklift backed up and struck the employee. The employee was hospitalized with a broken right arm.,1
"An employee was packing ice cream at the end of the filler, helping to clear the machine to change over to another flavor. A sweep arm came around and pinched his arm between it and the filler frame rod breaking the two bones between his wrist and elbow.",1
An employee tripped over the leg of the chair in the break room and fell resulting in a right hip fracture.,1
An employee involved in Ebola training was exposed to the fumes of an aerosolized cleaner that was being used. The employee suffered respiratory distress.,1
"Three employees were working in the yard to rig a single steel beam from a stack of steel in order to lift the beam and move it with a mobile crane. The crane operator walked over to the stacked steel to hand a dog (hook on the end of a chain for lifting steel) to Employee 1, who was located on the other side of the stacked steel. The crane operator could not reach Employee 1 through the stacked steel, so Employee 2 walked between the stacks to take the dog from the crane operator and pass it to Employee 1. When the crane operator leaned over the stack to pass the dog to Employee 2, the steel began to fall, pushing other pieces of steel towards Employee 2 and pinning the employee's legs between pieces of steel. Employee 2 suffered crushing injuries to the right leg that required hospitalization and surgery.",1
A pile of sheetrock fell onto an employee while trying to relocate the extension cord underneath. The employee sustained a fractured leg.,1
"On December 12, 2018, an employee's left ring fingertip was crushed and amputated between the pressure die and the tube/part when the machinery started.",0
"On December 12, 2018, at approximately 6:53 a.m., an employee noticed that a piece of scrap metal from the previous cycle had become lodged in the die area of the blanking machine. While attempting to remove the piece of metal with his hands, the employee slipped on a separate piece of scrap metal that was on the floor. He lost his footing and contacted the foot pedal. The blanking machine cycled while his left thumb tip was in the die area. The thumb tip was amputated at the thumbnail area. The machine was not guarded at the time.",0
"An employee was using a shear to trim casting. A spring-operated guard failed, and the employee's right index finger contacted the shear resulting in a fingertip amputation.",0
An employee reached under a conveyor to clean out the debris from the finish roll area. The employee's thumb was caught between a set of rotating debris diverters and amputated. The machine was guarded at the time.,0
An employee was moving a lawn mower onto a work trailer. His right index and middle fingers were amputated when his right hand went underneath the motor of the mower.,1
"An employee was walking from a building to the parking lot. The employee was walking up paver steps, tripped on a loose paver, and fell on the steps. The employee was hospitalized with a fractured nose, a laceration above the right eye, and pain in the neck, back and left knee.",1
"While working on an electrical subpanel, an employee fell from a mezzanine to a lower level. The employee suffered fractures to the right hand, right foot, and left leg, and was hospitalized for surgery.",1
An employee slipped on ice in the parking lot and fell resulting in a fractured wrist and patella and a chipped front tooth.,1
An employee was using a framing nail gun when a nail was shot into his chest.,1
"On December 12, 2018, the injured employee was directing the operator of a forklift as it was being loaded onto the bed of a truck when the forklift ran over the employee's leg. The employee sustained a fractured ankle requiring surgery.",1
An employee opened up a machine cover to setup the strut line and was using his left index finger to feel underneath the extrusion to check the adjustment. His finger was pulled into the pinch point created by the crimping disk. The fingertip was medically amputated.,0
An employee's hand was resting on the delivery truck's lift gate when it was activated. The employee suffered a finger amputation.,0
An employee was painting a wall while standing on a scaffold approximately two feet high. The employee fell off the scaffold and struck his head on the concrete floor. The employee was hospitalized for a skull fracture and brain bleed.,1
An employee had just repaired the breader machine. As the employee reached into the machine to retrieve a tool his thumb was caught between the belt and auger and amputated.,0
An employee was using a 6-foot step ladder to get grapefruit from the storage rack when he fell to the floor and injured his left side.,1
An employee was feeding clothing through the ironer when her sweater and left arm were pulled into a gear causing a severe laceration to her arm/elbow damaging nerves and an artery.,1
An employee was walking on the slope when he slipped and fell on a hard packed area. He broke several ribs and a bone in his face.,1
An employee was loading logs into a hopper when his hand became caught in a spike roll. The employee was hospitalized with an avulsion of the hand/fingers.,1
An employee was returning from the sink between two operating rooms. As she was entering a room she slipped and fell on the floor sustaining two fractures to her pelvis and a fractured left elbow.,1
"An employee was positioning a Shelby tube during soil extraction when the extruder started and the employee's hand was caught in the machine causing a crushing injury to the index, middle and ring fingers. One finger was amputated.",1
An employee was operating a bending machine when her right middle finger was pinched in the machine resulting in amputation of the finger.,0
"An employee helped a second employee assemble a boom stop, which involved sliding a spring into a tube. The employee's right index finger was pinched between the spring coil and the outer edge of the tube, amputating the fingertip.",0
"An employee was drilling holes on rubber with a drill press when the employee's glove became caught in the drill bit and wrapped around, breaking the employee's thumb.",1
"An employee was standing on a drum while doing inventory in the finished goods warehouse. The employee slipped and fell from the drum resulting in 5 broken ribs, a collapsed left lung and a partially collapsed right lung.",1
"An employee finished working in an attic. While leaving the attic, the employee lost their balance. While falling, the employee caught their right hand on a duct strap resulting in a laceration of the right pinky finger and an injured tendon requiring hospitalization.",1
An employee was riding a motorcycle from one building to another to attend a meeting. The pavement was wet and the motorcycle slid and fell onto the employee's leg fracturing the left fibula.,1
A ladder to the roof was set up on the loading dock. An employee was on the loading dock and getting ready to climb the ladder when the employee fell 3.5 feet off the loading dock. The employee was hospitalized with a fractured skull and broken collar bone.,1
An employee was stocking groceries and fell off a step ladder resulting in a broken hip.,1
An employee was cleaning glue off of the rollers on a chopper when their left hand slipped into the chopper resulting in amputation of the middle and ring fingertips. The machine was not locked out/tagged out at the time.,1
An employee climbed a piece of equipment to work on new equipment that was being installed. The employee fell 12 feet and fractured the left femur.,1
An employee had been tracking a newly installed conveyor belt when his arm was caught by the conveyor belt resulting in fractures to his upper left arm.,1
An employee was vaccinating an animal and stuck himself in the hand with the needle.,1
"An employee was near the copy machine behind the commercial desk when she tripped over an electrical cord, falling and hitting her head on the floor. She sustained a subdural hematoma, a cut above the left eye and pain in the left arm and right knee. She was hospitalized.",1
An employee pulling a piece of steel off of a forklift was hit by the piece of steel and required hospitalization.,1
"An employee performing a leak test of 3"" pipe was struck in the head with an end cap that dislodged once pressurized air was added to the line. The employee sustained a facial fracture and a skull fracture.",1
An employee was working on a pressure pump when his hand was caught between two pieces of steel. The right hand and fingers were broken.,1
An employee was opening a cart and putting down a shelf. She was hit on the right side of the head by the top shelf as she was working on the lower shelf. The employee was hospitalized and had a bruise behind the ear.,1
"An employee was walking down a curved staircase, missed a step, fell 5 or 6 stairs, and landed on her left knee and hit her head against the wall. The left kneecap was broken in two places.",1
An employee was trying to get a package on the conveyor belt and caught their left hand in the belt resulting in a partial amputation of the pinky finger at the second knuckle.,1
"While removing a retention bolt (U-Bolt) from a 3"" iron pipe on a sand separator, an employee's left hand got caught between the pipe and the metal frame, causing a partial amputation of the left middle fingertip above the nail.",0
An employee was closing a boxcar door when his right middle finger was pinched between the door and the boxcar. The right middle finger was amputated to the first digit.,1
An employee slipped and fell down the steps on a porch and was hospitalized for a fractured left knee.,1
An employee was walking to clock-in when they lost footing and fell. The employee sustained fractures to the right facial bones at the right maxillary incisors and a fractured patella. The employee was hospitalized.,1
"An employee was assisting with pouring some molds. After pouring a mold, the employee approached the cart that the mold was sitting on and slid the weight off of the mold. The metal had not solidified yet, causing the mold to separate and liquefied metal to run out between the molds into the employee's boot. The employee sustained second and third degree burns to the lower left leg and foot and was hospitalized.",1
An employee was walking toward the shuttle bus stop and was struck by a turning vehicle. The employee sustained a left knee injury and a fractured big toe.,1
An employee was stepping off the truck when he missed the last step and fell to the ground fracturing a hip.,1
An employee was attaching an air hose to the discharge area of an inserter machine. The engage button was bumped and the air pressure engaged the clamp which shut on his right middle finger amputating the fingertip.,0
"An employee was walking on the mezzanine deck, tripped over a 2x4 board, and fell landing on his left knee. The employee was hospitalized for surgery on his left knee.",1
An employee exited the conex box and stood on a scaffold stairway with guardrails and fell 8.5 feet to the ground. The employee was hospitalized with head and back injuries.,1
An employee was removing an existing roll when their left hand was caught and crushed in the roller wheel.,1
An employee was changing out packing paper in a machine used to crinkle paper for packing and shipping when their hand entered the machine and the left middle fingertip was lacerated. The injury will require surgical amputation. The machine was running at the time.,0
"As an employee was loading a large piece of scrap into the scrap drum, the scrap fell from the hoist and tipped the scrap drum over. This pinched the employee's leg between the drum and an adjacent remelt bloom. The employee sustained a right calf contusion.",1
An employee slipped and fell on slip sheets on the floor and fractured his ribs and pelvis.,1
"An employee was on an 8-foot A-frame stepladder, installing electrical conduit on a ceiling. The employee fainted and fell backwards from the ladder's fourth rung, landing on the concrete floor and suffering a head injury. The employee was hospitalized.",1
"While transitioning from a ladder to a metal roof, an employee slipped and fell backwards onto gravel. The employee was hospitalized with a broken vertebra and cuts on the hand.",1
"An employee was climbing a ladder to access the roof of a building while holding insulation, lost their grip and fell 15 feet. The employee sustained a fractured left ankle.",1
An employee was struck by a forklift while he was sweeping the floor and sustained a fractured pelvis.,1
"An employee was onsite getting estimates for additional work to be done. Later that day, a co-worker found the injured employee on the side of a road with lacerations to the head resulting in 10 staples.",1
An employee was loading materials into a truck using an electric pallet jack. His left pinky finger was pinched between a pallet and the pallet jack handle resulting in a fingertip amputation.,0
"While in a resident's room, an employee slipped and fell fracturing the right hip.",1
An employee was standing between two pipes. One pipe began to roll and caught the employee between the pipes at the hip. The employee sustained fractures to the sacrum and coccyx.,1
While loading beams onto a trailer one of the beams slipped and fell onto a lower beam and amputated the tip of the employee's right ring finger.,0
"On December 13, 2018, an employee was changing a battery on a stand-up forklift and suffered a crushing injury to their hand. The employee was hospitalized and due to complications received a finger amputation.",1
"An employee was walking, tripped and fell into a shelf resulting in a forehead laceration.",1
An employee was performing maintenance on a cooling unit while on a ladder. He fell off backwards when his foot got stuck in between the steps of the ladder. He was hospitalized for a knee injury requiring surgery.,1
"While operating a brake press, an employee's left middle finger was caught between the part and the side of the die resulting in a fingertip amputation.",1
An employee was holding the toe board of an elevator while installing it. The toe board slipped and contacted their pinky finger resulting in a laceration and fracture to the pinky finger.,1
"On December 14, 2018, at 2:00 p.m., after delivering two packages, a rural carrier slipped on ice at the base of a residential customer's steps and fell fracturing the left hip.",1
"On December 14, 2018, an employee was using a razor knife to cut the paint roller off of the paint stick. The razor knife slipped and cut the employee in the forearm/wrist area.",1
An employee was serving samples of food. She took off her gloves to take a picture and her hands began to swell.,1
"A printing machine operator was manually rolling a heavy roller to start the printing process. His left index finger became caught under the heavy roller. When he pulled his finger out from under the heavy roller, the fingertip and fingernail had been amputated.",0
An employee was activating the pneumatic release button on the spindle of the winder when the spool spun and the employee's middle fingertip was caught against part of the spindle cradle and resulting in an avulsion.,1
"On December 14, 2018, an employee's left foot was run over by a stand-up forklift. The employee was hospitalized with a foot injury.",1
An employee was cutting chicken with a chef's knife and amputated his left index fingertip. The fingertip was subsequently reattached.,1
"An employee was using a 15-foot metal rod to clear aluminum chloride from a hopper into a reactor below. After the aluminum chloride fell into the hopper, back-pressure caused the aluminum chloride to come up through the hopper and strike the employee in the upper chest and neck. The employee was hospitalized with third degree burns to his neck and upper chest.",1
An employee was setting up the production line and caught his left pinky finger between two conveyors resulting in amputation of the fingertip.,0
"An employee was transferring toluene solvent from one drum to another using a hand pump. A discharge of static electricity ignited the toluene which then splashed onto the employee's clothing. The employee was hospitalized with second degree burns to his left hand, back, and other parts of the body.",1
"While trying to isolate a valve, an employee was thrown 50 feet by a pressure release. The employee was struck on the head, suffering a head injury requiring eight stitches, and was hospitalized.",1
An employee opened a trailer door and bent over to pick up a package when a rope that was strapped around a pallet snapped and struck him in the left ankle. The left ankle was broken.,1
"An employee was operating a mold machine when their leg became caught between the mold and the platform, causing severe bruising.",1
An employee turned to leave the area to answer a phone and tripped on a mannequin's base. The employee fell and was hospitalized with a fractured hip.,1
An employee was manually unloading a truck when a U-shaped steel column fell on the employee causing a deep laceration to the left thigh.,1
An employee was positioning a palm tree on a flatbed truck. The palm tree rolled and knocked the employee to the floor. The employee sustained a fracture disk.,1
An employee was climbing down from a truck after replacing a light and fell to the floor. The employee sustained a fractured wrist.,1
An employee was operating a mobile crane when it overturned. The employee exited the cab and suffered a fractured ankle. The employee was hospitalized for surgery.,1
A temporary employee was walking down a flight of outdoor stairs and slipped and fell. The employee sustained fractures to the left leg tibia and fibula. It was raining at the time.,1
"An employee was taking pictures of an electrical transfer switch when he lost his footing and slipped, making contact with a live circuit. The employee sustained abrasions on the right shoulder, and burns to the left shoulder, left leg, and both hands.",1
An employee's left index finger was caught in the door hinges while opening the door from the main office to the factory area resulting in amputation.,1
An employee was driving a forklift onto a semi-trailer positioned at a loading dock at the employer's freight terminal. The semi-truck pulled away from the loading dock as the forklift was entering the trailer. The forklift fell to the ground between the back of the trailer and the loading dock and the forklift operator sustained fractured vertebrae.,1
An employee tripped over her hand bag and fell to the floor. She suffered a broken right foot and was hospitalized.,1
"An employee fell while on ski patrol, hit a rock, and sustained multiple broken ribs and a collapsed lung.",1
An employee was hospitalized for high blood pressure and a panic attack after a high stress incident occurred in the work place. A patient physically attacked other people.,1
"Upon completion of his delivery at a customer's location, a driver returned to the truck, placed his feet on the driver's side step, reached into the cab and turned off the power take off. The truck began to roll. The driver tried to enter the cab to apply the brakes, but just before being able to stop the truck, the right front wheel exited the pavement causing the truck to roll onto its right side. The driver went over the truck landing onto the driveway below. The vehicle continued  to roll over, crushing the left side on a rock. The truck came to rest with the damaged step straddling the driver's right leg, fracturing his right ankle.",1
"An employee was pumping diesel at a fuel pump. The pump was not working due to a loose belt. The employee attempted to repair the loose belt and his right had was caught between the belt and pulley. When the belt engaged, the tip of his right thumb was amputated at the nail.",0
An employee was checking the tension on a drum washer's chain. The chain was engaged and severed a fingertip on his left hand.,0
A stack of drywall fell on top of an employee's left leg that ruptured an artery in the knee.,1
"An employee was mixing cake icing. As the employee was lifting the icing bowl, their finger was caught in a chain drive resulting in a thumb tip amputation.",0
An employee fell through a window opening to the ground three stories below. The employee sustained a shattered left wrist and multiple broken ribs.,1
"An employee was exiting a vehicle to make final adjustments when they tripped and fell to the ground, landing on their right side. The employee sustained an injury to the right hip that required surgery.",1
While unloading a trailer an employee lifted a box and fell to the ground. He sustained a back injury.,1
"On December 15, 2018, an employee slipped off a ladder and fell approximately 2-4 feet to the floor below. The employee was hospitalized with a contusion to the back and hip.",1
"While walking on an uneven surface, an employee rolled an ankle and fell sustaining a broken radius and wrist.",1
An employee sustained a contusion injury when they closed their left thumb in the package car rear door.,1
"An employee stepped from a platform (approximately 4"" high) to pick up something from the floor, slipped, and fell to concrete floor resulting in a broken lower left leg.",1
An employee was laying down tubing and guiding the drill pipe when it got hung up and jerked causing the employee to fall through an unguarded V-door from the workover rig floor to a hydraulic catwalk. The employee suffered a fractured skull.,1
"An employee was transferring liquid steel into a buildup area. As he was disconnecting a compressed natural gas hose, it struck him in the face causing a laceration to the jaw and cheek bone area and a potential fracture.",1
An employee's hand was lacerated while clearing a blockage in a leaf vacuum.,1
An employee was climbing up a straight ladder to access a hydraulic excavator when he slipped and fell 6 feet. The employee suffered a fractured left hip.,1
An employee was waxing the floor when they slipped and fell striking his head on the wall. The employee was hospitalized with possible bleeding on the brain.,1
"On December 15, 2018, an employee sustained a partial amputation injury to the thumb while operating a spot welder.",0
"On 12/15/2018, at 10:00 a.m., a ski instructor at Breckenridge Ski Resort fell on difficult terrain while leading a ski class. The employee broke their lower left leg and was hospitalized for surgery.",1
An employee was unloading a pallet of orange juice containers. The shrink wrap broke on a pallet and the employee was struck by the containers.,1
"An employee was attempting to clear accumulating plastic bags in the rejection area with his gloved right hand. His gloved right pinky finger came in contact with the rejection feeder, amputating the fingertip. The machine was guarded at the time.",0
"An employee was driving a vehicle to his station to be cleaned. Once he got out of the vehicle, the car moved forward and pinned him between the vehicle and a yellow pole. The employee sustained injury to the left side and stomach.",1
"While an employee was removing a piece of plastic from a machine, the machine cycled, striking the employee and amputating part of her finger.",1
"An employee was making preparations and fell approximately 12-14 feet. He was hospitalized with two fractured ribs, a broken wrist, a broken shoulder and a dislocated elbow.",1
"An employee was retrieving material off the fourth floor. The employee stepped on the platform of a forklift outside the window and the platform collapsed. The employee fell to the ground and sustained injuries to the jaw, ribs, collar bone, hip, leg and ankle. All injuries occurred to the right side of the body.",1
An employee was collecting payment from a customer near the cashier booth when the customer's vehicle ran over the employee's right foot.,1
An employee fell from unsecured decking on top of structural steel resulting in seven broken ribs and a contusion.,1
"An employee was dismantling a railroad car using a cutting torch and was struck by the end of the railcar and the slope sheet, resulting in a fractured right arm.",1
An employee was using a saw to bevel a 2x4 and amputated a thumb tip.,1
An employee's finger was amputated while cutting meat with a band saw.,0
"An employee had been cleaning a paint gun. He tripped over the paint hose, lost balance and pulled the trigger of the paint gun. His left hand was sprayed with methyl ethyl ketone (MEK) and the force of the spray cut his glove and caused a laceration to the hand. The employee was hospitalized for infection.",1
An employee fell on a staircase at a new customer location. The fall resulted in right knee injuries including dislocation of the patella and a patellar tendon tear. The employee was hospitalized for surgery.,1
"An employee was driving a golf cart with an attached trailer, delivering packages in a residential neighborhood. The golf cart flipped and the employee sustained a right eye injury and a scalp laceration.",1
An employee was moving a rack of purchased glass with an electric power jack. The power jack jackknifed and the employee's hand was caught between the jack handle and the rack of glass resulting in amputation.,0
"On December 17, 2018,  the injured employee was standing near where two other employees were disassembling the winch line from the easement machine. The winch line was being drawn in and the injured employee noticed that the eyelet at the end of the winch line was about to become stuck in the boom tip. As the injured employee grabbed the eyelet with his left hand and twisted it  to free it, the eyelet was abruptly pulled through the boom tip and his left index finger was amputated below the distal joint.",0
"An employee was hit by a falling tree branch (4-5 inches in diameter and several feet long) and sustained lacerations to the left eyebrow, left forehead and right side of the scalp.",1
An employee had completed her mail delivery route and was headed back to the vehicle when she was struck by an on-coming car. The employee suffered a left leg injury.,1
"On December 17, 2018, at approximately 4:00 p.m., the injured employee was directing a shuttle buggy operator who was moving a shuttle buggy which had contacted a light pole. The light pole fell and struck the employee in the head. The employee was hospitalized with cerebral swelling.",1
"An employee was taking packages to the drop-off box, located near the stairwell door, when someone opened that door and caused the employee to fall onto the floor. The employee was hospitalized and required surgery for a broken hip.",1
"An employee was standing and talking to another employee. He had his hand on the platform of a double impact or divine grinder. He stepped on the foot pedal which actuated the machine and his right hand was pulled in resulting in amputation of the pinky, ring and middle fingers as well as the index fingertip.",0
An employee slipped in water on the dock and fell onto his left side. The employee suffered a broken left hip.,1
A pallet jack driver was unloading cases of dry groceries from the trailer to the pallet jack when the trailer's door came down striking him in the face/head. The employee sustained fractures to his skull and nose and was hospitalized.,1
"An employee was standing on a ladder pulling Romex cable. The cable got stuck and the employee lost his balance, falling from the ladder and landing on the right side of his lower back.",1
An employee was setting a beam inside a column when the beam came loose and amputated the employee's right index fingertip.,0
An employee was unloading a machine and a part fell off. The employee reached to catch it and the glove on their left hand was caught in the belt resulting in an amputation to the left middle finger.,0
"An employee was operating the retread builder, applying tread rubber to a casing. The tread rubber was a little short. He put his foot on the builder for additional leverage and grabbed the tread rubber with both hands to ""stretch"" the tread as the machine advanced. His foot was caught by the hub and pulled into the machine resulting in a compound fracture to his left ankle.",1
An employee was working on a light fixture when he lost balance and fell off a ladder to the floor sustaining a broken elbow.,1
An employee fell approximately four feet from a dumpster resulting in a broken right wrist/hand and a fractured pelvis.,1
An employee was on horseback checking cattle in pens. A cow scared the horse and the employee fell resulting in a broken ankle.,1
"An employee was ascending the stairs, slipped and fell.",1
"While an employee was cranking down the landing gear, the handle spun backwards and struck the employee in the face and neck causing a fracture to the jaw.",1
An employee leaving work tripped over a curb in the parking lot and fell breaking a leg.,1
An employee was discovered with breathing issues while making a delivery. The employee was hospitalized with a collapsed lung.,1
An employee was struck-by an 1800 lbs. I-beam as it was being turned over by a crane resulting in multiple fractures of the left leg and tendon damage to the left knee.,1
An employee was working from a ladder replacing a tank liner when the ladder slid out from underneath causing the employee to fall 10 feet. The employee sustained a broken wrist and thumb.,1
"An employee was going up a flight of stairs, missed a step and fell landing on his right side and fracturing the right hip.",1
"An employee was operating a 12-inch dual compound miter saw to make a 45 degree angle cut into a 1-inch thick lead ingot. The employee wore leather-welding gloves and had his left hand on the ingot to hold it in position. As the saw blade contacted the ingot, the ingot shifted, which caused the employee's left hand to contact the saw blade. The employee sustained a laceration to his left hand.",1
"An employee had been operating an excavator inside of the gondola building. Upon exiting the vehicle, the employee fell approximately 4 feet to the ground. The employee sustained a laceration to the right side of the head, rib fractures to his ribs and left wrist and damage to his vertebrae.",1
An employee was setting a side rail on a trailer and smashed his left thumb resulting in an amputation to the first knuckle.,0
"An employee was finishing the edge of a concrete pour for a highway section. He tripped and fell while moving out of the way, and his leg was run over by the wheel of the tube float. The employee sustained a displaced fracture of the right tibia.",1
"An employee was pouring liquid nitrogen into a container. When she moved the container, her thumb was on the rim and liquid nitrogen splashed onto her thumb and index finger.",1
"On December 18, 2018, an employee was cleaning a residential sewer with a steel cable. The cable wound around the employees' right hand, resulting in a partial amputation of the middle fingertip.",0
"An employee was inside a rebar cage, helping a coworker hook up chains to rig for lifting. The cage shifted and the rebar collapsed to one side; the employee suffered crushing injuries to the chest and an ankle contusion. He was hospitalized.",1
"On December 18, 2018, at a tower erection site, an employee working as an oiler was crushed when the jib of the crane fell on them. The employee suffered fractured ribs, pelvis and femur in addition to a collapsed lung and kidney damage.",1
An employee picked up a chicken from a moving conveyor belt and his glove became caught. The employee sustained a fingertip amputation.,0
An employee suffered a broken leg and was hospitalized.,1
Three employees were sliding new auger flighting into a bin. The piece of flighting was 30' long and had to slide across an electric motor mount bracket. The injured employee's left index finger was caught at the pinch point created by the flighting and the motor mount bracket. The fingertip was amputated.,0
An employee suffered a left ankle injury when it was struck by a moving vehicle while his leg was still outside of the vehicle.,1
"An employee was unloading material that was stacked on rolling pallets on the truck. When the employee removed the tie-down strap, the rolling cart struck him and knocked him off the truck and he fell four feet to the pavement below. The employee was hospitalized for a subdermal hematoma to the head, lacerations, fractured ribs and a subdermal hematoma to the abdomen.",1
"While securing the access ladder to the roof, an employee slipped on roofing paper and fell 8 feet. The employee was hospitalized with fractured vertebrae. At the time of the incident, the employee was wearing a harness but was not connected to an anchoring point.",1
"An employee was reaching to access the roller area of a conveyor belt system to clean gypsum from under a roller. His hand was caught between the roller and the conveyor belt, resulting in second and third degree friction burns to the back of his right hand. The machine was running and guarded at the time.",1
"An employee had been using a stone saw to cut granite countertops. After making a cut, the employee used a suction cup to pull a cut countertop toward them. The material dropped onto the table, and the employee's left thumb was caught between the two objects. The thumb was amputated from the first knuckle down.",0
An employee was unloading a pallet containing brake shoes onto pallet racking using a stand-up reach truck. His arm became pinned between the reach truck and the metal racking causing lacerations/bruising to his forearm and elbow. He was hospitalized.,1
An employee was pinned between a wall and a reach truck and sustained a fractured pelvis.,1
An employee was clearing a jam in a bread slicer and suffered amputation of the left middle fingertip.,0
"An employee was putting product away using a powered industrial truck. While stepping off of the equipment, the employee felt pain and discomfort in his foot. The employee was hospitalized for a fractured big toe that required surgery.",1
An employee was building a wooden crate around an industrial fan for shipment. The employee's material slipped and as he tried to catch a board a staple was shot into his right knee cap and femur. The staple need to be surgically removed.,1
An employee was trying to unlock an electrical breaker in a motor control center. An arc flash burned the employee's hands and upper left arm.,1
"On December 18, 2018, an employee was using a cart to transfer a glass making device called a ""baby cooler."" The cart tipped over and the baby cooler fell off onto the employee's left leg fracturing the lower leg.",1
"An employee was loading freight with a forklift and positioning freight against a trailer wall to be secured for transport. Heavy cargo that was moved against the trailer wall, slipped and fell onto the employee before it could be strapped in place. The employee was hospitalized for a possible spinal injury.",1
An employee was hospitalized with a skin infection after checking security in hospital rooms.,1
"An employee was running a punch press, reached to grab a part out of the press, and the ram came down on top of their hand amputating the left index and middle fingers.",0
An employee was operating a chainsaw to cut a small tree next to a fence and suffered lacerations to the left hand. The employee was hospitalized for surgery.,1
"An employee was walking towards a ramp over a large pit. The employee missed the ramp and fell into the pit, landing on the floor approximately 30 feet below. The employee sustained a fractured skull, broken T-5 and T-7 vertebrae, a collapsed lung, and head trauma.",1
"An employee was operating a tooling center machine behind a barricade inside of a building when an explosion of unknown source occurred. The explosion blew the front of the barricade inward, forcing the employee backward and pinning him to the floor. The employee sustained multiple traumas and both legs were broken.",1
An employee was on a rooftop loading shingles from the conveyor to the rooftop. The employee slipped and fell to the ground breaking the left arm.,1
"While an employee was installing a door opener, the limit switch chain engaged and amputated his fingertip.",0
"On December 18, 2018, a temporary employee was spotting equipment being loaded onto a trailer, when a wooden plank fell from the trailer and broke the employee's leg.",1
"A temporary employee was installing duct work at a jobsite when he fell 10 feet through a drop ceiling to the office below. The employee sustained a fractured right ankle, heel, lumbar spine and thumb.",1
An employee was using a pedestal grinder to grind burrs off metal. The employee's right thumb was pinched between the metal and the grinding stone resulting in a thumb tip amputation.,0
An employee was cutting chicken using a knife and amputated his left index  fingertip.,0
An employee was operating a table top drill press drilling one-inch holes into a plastic part. The plastic part became stuck on the drill bit and spun. The employee's gloved right hand was tangled in the rotating chuck resulting in amputation of the index fingertip.,0
"An employee was about to exterminate bugs in an oil well using acrolein. The chemical sprayed out of a valve, striking the employee in the midsection and causing chemical burns to his chest. He was hospitalized.",1
"The injured employee was assisting a tie back drill. As the operator moved the drill toward the wall, the injured employee's left leg was caught between the rotating part of the drill and the wall. The injured employee's lower left leg sustained soft tissue swelling requiring hospitalization.",1
An employee was conducting pest control duties at a residence and was bitten by a dog. The employee was hospitalized.,1
An employee lost consciousness when they slipped and fell on ice while exiting a barn.,1
An employee dropped a humidifier panel on his left middle fingertip resulting in amputation.,0
An employee's right ring finger was caught between the hydraulic cylinder of the juice line press and the cylinder stopper while helping to transfer pineapple juice into a transfer cart to be used on another line. This resulted in an amputation.,1
An employee was removing Christmas tree lights from a trailer when his little finger was smashed between a forklift bar and a steel bar. He suffered an amputation to the finger.,0
"An employee fell while ascending a ladder, catching and breaking his leg between the fifth and sixth rungs.",1
An employee was cutting basil with a knife and amputated the tip of his left thumb.,0
"An employee was performing maintenance on a heater treater. When he opened the heater treater door an explosion occurred. The employee sustained hand, body, and face burns.",1
"An employee was getting out of the truck at a gas station, slipped and fell to the ground. The employee was hospitalized for a ruptured spleen.",1
An employee was climbing a 24-foot extension ladder to get to the roof of a new one-story house when he lost his balance and fell to the ground. He sustained a fractured left wrist and dislocated left shoulder. The employee was hospitalized.,1
An employee was obtaining product samples on a sample testing conveyor when his right hand was caught in a pinch point and the tendon between his thumb and index finger was severed.,1
An employee was oiling a running machine and suffered an amputation injury to the right middle finger when it was caught in a nip point. The machine was not guarded at the time.,0
"An employee tripped over his machine's pedal and fell, suffering broken bones.",1
"An employee was leaving work, slipped on a puddle of water on the floor and fell breaking a kneecap.",1
"A temporary employee was cleaning a conveyor on a machine when the glove on his right hand was caught on the hinge of the conveyor and pulled into the motorized wheel causing a laceration, contusion, and bruises. The employee was hospitalized.",1
An employee was walking down a flight of stairs and fell after missing a step. The employee was hospitalized for a tear in the quadriceps.,1
"An employee was walking up or down the stairs, slipped or tripped and fell striking his head on the door. The employee suffered a laceration to the head.",1
"An employee was stepping out of her truck to perform a pre-trip inspection. As she turned to step down, she slipped and fell to the ground, breaking her left ankle.",1
"While changing the tire on a disabled semi, a technician was struck by a car. The technician suffered multiple lacerations and contusions from the neck to the pelvis, as well as a fractured pelvis.",1
An employee suffered a hernia while lifting a box of gloves weighing between 1 ounce and 20 pounds.,1
"While adjusting a rotating table on a process line, a mechanic caught and amputated the tip of his finger in the drive chain sprocket.",0
An employee was helping to load pipe onto a truck when a pipe came down onto the employee's right index finger causing a fingertip amputation.,1
"While walking on a newly graveled area, an employee tripped and fell, suffering a broken right ankle.",1
An employee was struck from behind by a golf cart causing two fractured ankles and ribs.,1
An employee was installing a hydraulic cylinder when it slipped and fell. His right little finger was caught under it and the fingertip was amputated.,0
An employee was loading bags of resin into containers at a loading dock. His head was injured between a container and the loading dock doorframe. He was hospitalized to treat a brain bleed.,1
An employee stepped into an aisle and was struck by a powered industrial vehicle (PIV). The PIV pinned his foot to a guardrail/toe board. The employee's foot was crushed.,1
"An employee suffered fractured ribs, a fractured ankle, and facial lacerations after falling out of a mountain coaster cart while performing opening maintenance and cleaning on the track.",1
An employee was walking under the racking system at a grease plant when he hit his head on a crossbeam and fell. He suffered a head injury and two broken bones in his right ankle.,1
"An employee slipped while unloading a home health care client's groceries from her car. The employee fell to the wet ground, suffering a broken hip.",1
"An employee was hanging a sign, fell and struck their head on the floor.",1
"On Wednesday, December 19 at approximately 10:00 p.m. an employee was retrieving boxes to take to her work station when she was struck by a forklift that was backing up resulting in injuries to both lower legs.  The employee was hospitalized for surgery.",1
Three employees were exposed to chlorine fumes while draining a tank. One of them was overcome by the fumes while descending a staircase and was hospitalized.,1
"An employee tripped on an antifatigue mat, falling to the floor and breaking a femur. The employee was hospitalized.",1
An employee was using a propane buffer in an enclosed area when he felt dizzy and fell striking his head against a wall. The employee was hospitalized for a head injury and carbon monoxide poisoning.,1
"An employee was moving a stack of drywall that was leaning against a wall. The stack tipped over and fell back onto him, breaking his left tibia.",1
"An employee was loading insulation into pans to go into the oven. The molds jammed and the employee used a crowbar to unjam the molds. When the jam cleared, the crowbar broke loose and struck the employee in the face causing damage to an eye socket.",1
An employee was operating a horizontal band saw to cut pipe and amputated four fingers on the right hand.,1
"While walking around to the other side of a pallet on a movable platform, an employee tripped over the pallet's corner and fell, suffering a broken right leg.",1
"An employee opened the electrical enclosure to do an inspection. The employee reached into the enclosure to check the incoming wiring and contacted the wiring on the top of the breaker with his right ring finger, middle finger and thumb. The employee was hospitalized for burns and electric shock.",1
An employee was rigging a 5th wheel to be lifted by an overhead crane when the employee's right index finger was caught in a pinch point resulting in an amputation.,0
"An employee was performing security services at a gate when she was startled and tripped, falling backwards to the ground. She struck her head, suffering a contusion.",1
An employee tripped and fell while walking in an office hallway. The employee was hospitalized with injuries to the right elbow and left knee.,1
An employee was installing a tire on a rim. As the machine was running his left hand was on the wheel and the roller caught and amputated the tip of his left pinky finger.,0
Employee 1 was slowly transporting an electric motor via a lifting strap from a forklift while another employee (employee 2) was trying to keep the electric motor from swinging as the forklift was passing under a door. The electric motor slipped out of the lifting strap. Employee 2 tried to catch the falling electric motor and severely cut three fingers on his left hand. Employee 2 was hospitalized for hand surgery.,1
"An employee was rinsing the inside of a tank with water from a 1-inch hose. The water pressure surged and the hose whipped around. Its metal nozzle struck the employee's head and face, causing a fracture to the right mandible, a head laceration on the right side of the head behind the ear, and trauma to the right side of the head.",1
An employee was walking in the grass to deliver a package to a customer when they slipped and fell breaking their lower left leg.,1
"An employee added flux to molten metal. As the employee tried to push the flux into the metal with a rake, the metal erupted and splashed the employee. The employee suffered burns to the left side of the face, the top and back of the head, the left arm, the back, and the right ankle.",1
"An employee was on a 9-foot ladder installing cables. He fell to the floor, breaking two ribs on his left side and suffering a concussion.",1
"An employee was repositioning a bucket truck and struck an electrical line. The employee sustained burns to the forehead, left palm and buttocks.",1
"An employee was cleaning out a salt machine. The employee's hand was caught in the auger area, suffering a broken bone.",1
"An employee was climbing into a bucket truck, slipped, and fell. The employee hit their head and suffered a laceration.",1
"Three employees were placing forks onto a backhoe. As the forks were slid onto the holder, an employee's finger was smashed between the forks and the backhoe. The fingertip was medically amputated.",0
An employee was injured when their left arm was caught between the coiling can and idle can of an embosser. The employee suffered a broken left forearm and was hospitalized.,1
An employee was putting air into an expansion tank when it exploded and fractured the left side of their jaw.,1
"An employee was servicing a vision sorter. While the employee was retrieving paper under the machine, the belt and pulley amputated the employee's left index finger above the first knuckle.",0
An employee was handling a bandsaw in preparation to use the tool and severely lacerated a finger while removing the tool from a gang box.,1
An employee was cleaning a spot of asphalt from two rubber-coated rollers. The employee's left hand was pulled into the nip point between the rollers; the hand and fingers were partially degloved on the top side.,1
An employee was attaching/engaging a plate bug or clamp to a finished metal part weighing about 100 lbs. still within a press brake. The downward motion of engaging the plate bug onto the part caused the part to fall off of the press brake. The employee suffered an amputation injury to the right middle finger.,0
"An employee was assisting a forklift operator by pointing out where the forks on the lift needed to go. His left index finger was caught between the forks and some lumber, causing lacerations and an amputation of the fingertip.",0
"An employee operating a guillotine paper cutter amputated the top of the left middle finger while attempting to straighten 24"" X 36"" newspaper sheets that were being cut.",0
An employee was working on an air conditioning unit while on an 8-foot fiberglass ladder. He fell approximately 4-6 feet to the ground hitting his head. The employee sustained four broken ribs on the left side and scrapes on the hands.,1
"After three metal pallets fell off a trailer, an employee came down from the trailer. The trailer then moved, and the tire of the trailer struck a metal pallet. The employee's left leg was caught between the pallet and a retaining wall resulting in a degloving injury to the calf.",1
"An employee was working with a team to move a forming mold: a large steel tooling that weighed about 4,000 pounds. The employee was pushing the cart that held the mold in position. The mold did not position correctly; it kicked back, pinching the employee's right ring finger against the roller wheel on the cart. The finger was amputated.",0
An employee was about to enter a parked car and was struck by a vehicle being operated by another employee resulting in a broken right leg and wrist.,1
"The injured employee was working with a mechanic to locate an oil leak on the crane. When the mechanic moved the crane, the injured employee was struck in the head by the grapple attachment.",1
"An employee was cutting lettuce with a manually operated food slicer. His right thumb contacted the slicer's blades, causing a partial amputation to the tip of the thumb.",0
"An employee was descending a two-step ladder, missed the last step and fell fracturing her hip.",1
"While preparing to lock out equipment, an employee was caught under a platform as air bled from a cylinder. The employee suffered injuries (as well as difficulty breathing while pressed under the platform) and was hospitalized.",1
An employee was hospitalized on 12/21/2018 for an infection resulting from a spider bite that happened at work.,1
"An employee was on a ladder inspecting a roof. The ladder slipped out on a wet deck and the employee fell. The employee fractured 10 ribs, an arm, their head and punctured the right lung.",1
An employee was cutting a rib loin with a bandsaw. The blade amputated his right middle finger at the highest joint and cut his ring finger.,0
"While walking along railroad tracks, an employee was struck by a load that fell from a forklift. The employee's foot was broken.",1
An employee lacerated his ankle while operating a stand-up forklift.,1
An employee was threading paper onto a spool when his hand was caught in the rollers crushing his right arm.,1
"An employee stood up from her desk, tripped on her chair's wheel caster and fell striking a filing cabinet with her shoulder. She sustained a shoulder injury requiring surgery.",1
"An employee was welding a 25-foot, 1,700-pound steel I-beam when a forklift knocked it off its supports. It fell onto the employee, breaking his right collarbone and six ribs on his right side and causing a hematoma on his left leg.",1
An employee was shot by another employee during an altercation with a customer.,1
"An employee was cleaning hot, hardening plastic from a barrel when the plastic exploded out of the barrel. The employee suffered burns to the face and hands.",1
"An employee was climbing up a ladder to insulate a railcar. The ladder slipped and he fell about 4 feet, hitting the concrete floor and breaking his right tibia.",1
A dock employee suffered back pain and a muscle spasm after picking up a box of plastic shopping bags. He was hospitalized.,1
"At about 6:00 p.m. on December 21, 2018, an employee was trying to clear a jam in a hopper. The push plate moved while his right hand was in the hopper, resulting in a crushing injury to his right index finger. The finger was surgically amputated.",0
"An employee was moving a wooden shelf when a skid steer loader ran over his right foot, breaking it. He was hospitalized.",1
An employee was working on an eight-foot step ladder on the third or fourth rung hammering a nail. The employee slipped and fell hitting his head on the ground. The employee sustained a concussion.,1
An employee was checking the tire pressure on a semi-trailer when the tire exploded causing swelling to the employee's head and face.,1
An employee was operating a vertical press and sustained the amputation of the right thumb tip.,1
A finger on an employee's left hand was caught and lacerated in a meat grinder.,1
"While picking up trash, an employee was struck in the head by cinder block debris that fell from a scaffold. The employee suffered a head injury and was hospitalized.",1
"An employee was stamping a brass header plate on a press. When the press was activated, the die crushed his left hand, causing amputations to the index finger (from the middle knuckle) and the ring fingertip.",1
An employee was using an industrial paper cutter to open plastic bags. The cutter caused an amputation (with bone involvement) to the employee's left index finger.,0
"While working at a sorting machine, an employee was struck and pinned against the machine by a forklift. The employee's leg was partially amputated.",1
"At about 10:34 a.m. on December 21, 2018, an employee was replacing a chain on a chain-driven conveyor. While his hands were on the chain, it began to move, amputating the tips of his right index and middle fingers at the first knuckle.",1
An employee performing work outdoors was bit/stung by an insect on the back of his lower left leg and subsequently admitted to a hospital for an allergic reaction.,1
"While unpacking glass, an employee suffered a hand laceration from broken glass and was hospitalized.",1
"An employee was checking 112"" corrugated board for moisture coverage/dry spots to ensure that starch content was correct. While the employee's hand was on a fixed bar, the machine was turned off and another, pneumatically operated bar moved to its off position, pinching the tips of the employee's right index, middle, and ring fingers against the bar the employee was gripping. The employee suffered amputations to the fingertips.",0
"Employee 1 was selecting and moving an order onto the platform of his order picker. Employee 2 was operating a reach truck and entered the aisle where employee 1 was located. Employee 2 drove down the narrow aisle toward the inbound side of the building. While moving, the engine compartment of the swing reach truck impacted employee 1's left leg, pinning it between the moving truck and the platform of the parked order picker. The injured employee suffered a crushed left leg from mid-calf to ankle/foot and sustained multiple broken bones and lacerations.",1
"An employee fell after being playfully shoved on the shoulder. Her head struck the floor, and she suffered a brain injury as well as an ankle injury.",1
"An employee was moving a stand-up powered industrial truck. His left ankle was caught between the truck and a dock plate, causing a hairline fracture of the lower tibia.",1
"While standing by an exit door, an employee was struck by three store signs that had been pushed over by strong winds. The employee fell to the floor, suffering a fracture to the left shoulder.",1
An employee was injured in a fall from height.,1
"An ape bit an employee's right middle finger as she was feeding it, breaking a bone.",1
An employee suffered a broken forearm while operating a lathe machine.,1
"An employee slipped while walking on tanks, suffering a broken leg.",1
"A maintenance die mechanic was lowering a 16-foot extension ladder after inspecting a boiler. His foot became lodged between a gas line on the floor and the ladder, and he lost his balance. He suffered broken bones to his left and right legs.",1
"A maintenance technician was pouring gasoline into a pump when the gasoline ignited, causing second-degree burns to both of his arms. He was hospitalized.",1
"An employee was walking to an office, tripped and fell breaking a hip.",1
"An employee was checking freight when a forklift struck him from behind, breaking his left big toe and second toe.",1
"An employee slipped and fell on a kitchen floor, suffering a broken rib and collapsed lung.",1
"A welder was installing weights on 24-inch plastic pipes, using a wedge to install the two half weights. The wedge moved and the tip of the welder's right thumb got caught between the pipe and the wedge. The thumb tip was amputated.",0
"An employee was walking by a parked forklift when a second, moving forklift struck it. The parked forklift was pushed forward and broke four bones in the employee's foot.",1
"An employee was pulling a cardboard box from a shelf when other boxes fell, causing the employee to fall backward to the ground and suffer a broken hip.",1
"Employees at a rig were removing a section of piping from a basket using an air hoist. The piece of piping was lifted from the basket and raised about 2 feet high, at which point a second piece of piping leaning against the same basket (called a reacher pipe) was bumped. The reacher pipe fell and crushed an employee's lower right leg, breaking his ankle. He was hospitalized.",1
"An employee was unjamming a baler when it started, catching the employee's right foot. Two of the employees toes were amputated and one toe was partially amputated.",1
An employee was burned by hot fryer oil while replacing metal dividers between fryers.,1
"An employee had just removed a cash box from a safe. The safe door closed on the employee's left hand, cutting off the tip of his thumb.",0
"While traveling between buildings during work hours on a public roadway, an employee was involved in an altercation with a pedestrian and sustained a gunshot wound to the hand.",1
An employee was feeding paper from a roll into a paper machine. A piece of paper was caught in the machine; the employee was removing it when his left middle finger was caught between a pulley and the paper roll. The fingertip (including tissue and bone) was amputated.,0
"Employees had just finished rerouting conduit and wiring beneath a rooftop air conditioning unit. The unit had been moved off its stand to access the wiring. While it was being lowered back onto the stand, an employee's right middle finger was caught between the unit and the stand. The fingertip was amputated at the top joint.",0
"An employee was repairing lights in a parking lot from a knuckle boom lift. He parked the truck next to a light pole and boomed up; the boom struck a 14-kilovolt power line, and he suffered burns to 32% of the left side of his body.",1
"An employee fell while skiing down a mountain, landing on a large rock and suffering a hip/pelvis fracture.",1
"On 12/22/18, an employee was clearing a film jam in the forming tube on the packaging machine when the machine unexpectedly energized and amputated his left index finger.",0
A forklift operator was trying to exit a forklift before it struck a column; the operator's lower left leg was crushed between the forklift and the column.,1
An employee's finger was caught between a drill pipe and part of a rig structure during rigging up. The finger was partially amputated.,0
An employee was using a ladder to take a building measurement of a mansard. The ladder slid and the employee suffered two broken heels. The employee was hospitalized.,1
"An employee was descending from a windmill fixture when he fell from a fixed ladder, landing 9 feet below on the vessel deck. He suffered a broken leg.",1
"An employee was defrosting a valve using methanol. The valve ruptured and sprayed methanol on the employee's flame-resistant clothing, causing skin irritation.",1
"An employee tripped while cleaning, suffering a broken tibia.",1
An employee was turning an electric pallet jack. The employee's left little finger was pinched between the pallet jack's handle and a hinge on a freezer door. The fingertip was partially amputated.,0
An employee was overcome with carbon monoxide and suffered shortness of breath.,1
"An employee was blowing down a boiler when a cap came off the steam check valve. The steam caused first- and second-degree burns to the employee's chest, arms, and neck area.",1
An employee was cleaning cotton in a press pit when the press ramrod pinched his right forearm.,1
An employee was fixing a glazing machine on a cake line. The machine amputated the employee's finger.,0
"A driver fell, hitting his head on the pavement. He was hospitalized.",1
An employee was using a chainsaw to cut the top off a tree he had felled. A limb from another tree (weighing about 30 pounds) fell about 30-40 feet and hit him on the back. He suffered four broken ribs and three smaller broken bones near the spine.,1
An employee's right index finger was slammed and broken in a postal vehicle door.,1
"An employee was in a chick room at a hatchery. The room was being washed down and the concrete floor was wet; the employee bent over to pick up a chick off the floor, and when he stood up and began to walk again he slipped and fell to the floor. He struck his head, shoulder, and back and suffered a concussion.",1
"The high density clean out drain knife gate valve was stuck in the open position. When the employee attempted to confirm the knife gate valve was closed, by feel, the knife gate valve closed on the employee's fingers causing the amputation of three fingertips on the right hand.",0
"An employee was fighting a fire caused by an exploded furnace when he was overcome by smoke, fire, and powder from the fire extinguisher.",1
"A tire technician was changing a customer's tire on the shoulder of an interstate highway. As the technician removed a spare tire from under the customer's car, a car left the road, striking the van and the technician. The technician suffered multiple injuries, including a head injury.",1
"An employee was cleaning a masa pump. As he was removing residue from the intake, the tip of his left middle finger was amputated. The product intake cover had been removed at the time of the incident.",0
"A security guard was engaged with a belligerent visitor who had been escorted out of an emergency department waiting area. The visitor stabbed the guard, lacerating the guard's head and neck area.",1
An employee sustained a hernia while throwing the daily trash into the dumpster.,1
An employee was working on a soybean press. The press caused the amputation of the employee's right arm above the elbow.,1
"While walking to a vehicle in a parking lot, an employee tripped on a curb and fell, suffering a broken left leg and left thumb.",1
"An employee fell while stacking boxes on a flatbed truck, landing on the ground and suffering a collarbone fracture and a head injury.",1
"An employee was inside a shipping container, securing it for transport, when a crane component shifted and wedged the employee against a neighboring frame. The employee suffered lacerations to the liver and kidneys and a fractured lumbar vertebra.",1
"An employee was driving a loaded stock picker down an aisle. The loaded product struck a support beam and swung around, pinning the employee against the front of the stock picker. The employee suffered damaged tendons in the right leg.",1
"An employee slipped on ice while walking across a parking lot to a personal vehicle. The employee fell to the ground, suffering a broken upper right femur.",1
An employee was using a pressure washer to clean a paper machine. High-pressure water from the nozzle caused a 4-inch laceration on his left forearm.,1
"While engaged in stocking and clerk activities, an employee fell on water spilled by a customer. The employee suffered a broken hip.",1
"An employee was attaching one end of a steel strip from a pancake reel to the end of a steel strip in a machine. The machine started pulling the strip and pulled the employee's hand in, causing a deep laceration (including bone) to the right middle finger. The employee was hospitalized.",1
An employee had been checking the brake system of a customer's truck in the parking lot. The truck rolled over the employee and caused a fractured pelvic bone and a torn ligament.,1
"An employee fell from a delivery truck, losing consciousness and suffering broken ribs. The employee was hospitalized.",1
"An employee was loading recyclables into a hopper at curbside. A cardboard box began to fall out of the hopper; as he pushed it back in, the tote lifted toward the hopper and trapped the left side of his torso against the truck body. He suffered chest injury, including a punctured lung, and was hospitalized.",1
"While taking inventory of wood in a lumberyard, an employee fell about 6 feet to the ground. The employee suffered multiple head fractures and a possible concussion.",1
"While unloading a truck, an employee fell off the back of the trailer to the ground. The employee suffered a broken left elbow.",1
"An employee was walking with a tray of chocolate when her right leg slipped, causing her to fall and suffer a muscle tear to her right leg.",1
"An employee and a delivery driver were trying to right an electric pallet jack that had fallen to the ground. The employee's right ring finger was caught between a moving part and a fixed part of the pallet jack, causing an amputation at the first knuckle.",0
"An employee had just delivered product to a transfer station. He was on his way back into his truck when a dock plate gave way and he fell between the truck and the loading dock. A powered pallet jack fell with him and struck him in the face, fracturing his face and cheeks.",1
"An employee went to drive his golf cart after a safety meeting, but it would not start. While working on the golf cart, the engine started and the employee's finger was caught in the running belt between the belt and pulley. The employee's right index finger was damaged in the nail area.",1
An employee was installing the harness bracket from an 8-foot ladder. The employee slipped and fell to the ground from the roof line. The employee sustained injury to the lower back.,1
"An employee was cleaning rollers on an extruder with a rag. The employee's right arm was caught in an ingoing nip point, suffering an injury that required hospitalization and surgery. Lockout/tagout was not in effect and the nip point did not have a guard at the time.",1
An employee and his supervisor were repairing an electrical panel when an arc flash burned the employee's left hand.,1
"A shuttle driver was receiving a gas card from the driver of another shuttle. The driver's hand was pinched between the two vehicles, suffering fractures and lacerations.",1
"An employee was walking through the parking lot to her office building when she slipped on ice and fell, breaking both legs near the knees.",1
An employee was clearing a jam in a trimmer machine when the machine cycled and caught his fingers. He suffered amputations to his right index and middle fingers. The machine was not locked out or guarded at the time of the incident.,0
"While a line was being blown down at a gas lift well, an object struck an employee on the head. The employee suffered a forehead contusion with a possible fracture.",1
"While sanitizing a guide roller on a conveyor belt system, an employee sustained fractures to the radius and ulna in his right forearm.",1
"An employee was sweeping at the front of a store. The door opened and hit him on the ankle, causing him to fall and break his hip. He was hospitalized, requiring surgery.",1
"An employee was removing lint from a monitor behind a robot. As the employee was pulling his hand out of the docking piece, the robot moved and caught his finger between the docking piece and the flat piece of metal on the bottom of the robot. The tip of his right little finger was amputated.",0
An employee was descending a ladder in the back room and missed the last step. The employee fell and suffered a broken hip and minor lacerations.,1
"An employee slipped on muddy ground while backfilling a trench. His face struck against a metal gas riser, causing a broken facial bone.",1
An employee was fabricating sheet metal on a jump shear when the jump shear amputated his right index fingertip.,0
"An employee's arm became stuck in a tile counting machine. The employee's hand was injured, suffering nerve damage that was surgically treated.",1
An employee was trimming pieces of lumber on a table saw and partially amputated their left thumb and middle fingers.,1
An employee's right index finger was crushed.,1
"On December 27, 2018, an employee fell from a fixed ladder and struck the ground. The employee was hospitalized with a fractured clavicle and potentially fractured ribs.",1
"An employee was picking orders using an electric pallet jack. The jack ran over his foot, fracturing the foot and a toe.",1
An employee was loading a roll of material with a pallet jack. The jack rolled backwards and crushed his right arm against a machine and fractured it.,1
"An employee was using a forklift to remove a loaded pallet from a rack shelf. As he turned the forklift, a beam struck his left leg and fractured the tibia.",1
"On December 27, 2018, a security officer was struck by a motor vehicle while working at a base entrance gate. The employee suffered a crushed left leg, which had to be amputated.",1
"An employee was installing TPO roofing on the parking garage side of a 3-story building. When he lifted a sheet of insulation, the wind pushed the insulation and caused the employee to lose balance and fall 10 to 12 feet onto the third floor level of the parking garage. The employee sustained injuries to the ribs and arm. The employee was wearing a lifeline at the time.",1
"An employee was assisting with the cleaning of a batter applicator machine. While removing a segment of poultry from a pipe, which was connected to a 1.5-inch positive displacement pump, the employee's right index fingertip was amputated by the pump.",0
"An employee was walking through the parking lot, slipped on ice/snow and fell. The employee suffered a concussion, a skull fracture and a brain bleed.",1
"An employee was adjusting a bending machine, using a crescent wrench on a nut. The wrench slipped off the nut and his finger was smashed between the wrench and the machine. The middle and index fingers of his right hand were lacerated, requiring stitches and cleaning.",1
An employee's back condition was aggravated when he moved a drum from a scale to a pallet. He was hospitalized.,1
"An employee opened a safe to make change. When the safe closed, it struck his right thumb and severed the tip. He was hospitalized, requiring plastic surgery.",1
"An employee fell off a truck while unloading tanks. The employee suffered a skull fracture, a fractured left elbow, and brain bleeding on the left side.",1
An employee was raising the landing gear on a tractor trailer when the cranking handle for the landing gear hit and bruised his jaw.,1
"An employee was working from a scaffold to remove an HVAC unit from a ceiling. Part of the unit fell out and struck the scaffolding, causing the employee to fall to the ground. The employee suffered a cut to the back of the head and a back injury requiring hospitalization.",1
"While checking rebar, an employee fell from an 18-foot height to the ground. The employee fell on their face and suffered a broken pelvis and a nicked artery.",1
"A mail carrier tripped on a 2x4 in a driveway and fell, breaking his upper arm.",1
"An employee was delivering a load from a truck. While pulling on a strap attached to the truck, he fell backwards and hit his head on the ground. He was hospitalized, suffering bleeding on the brain.",1
"On December 28, 2018, an employee fell from a ladder while installing playground equipment. He landed on the concrete and the ladder below, breaking ribs and bones in a foot. He was hospitalized.",1
"On December 27, 2018, an employee was bending over to pick up plates that had fallen to the floor and caught their hand in a machine. The employee suffered lacerations requiring skin grafting.",1
"An employee was lifting a unit load device's lock into the upright/locked 
position after the container had been slid into place on a 777 airplane. The control lever to move the container was struck and the container moved, catching the employee's left ring finger in the lock. The fingertip was partially severed.",1
An employee was trying to move a concrete box when his left ankle was caught and broken between two concrete boxes.,1
An employee was checking the rollers on a conveyor when their glove was caught in the rollers and belt resulting in a fingertip amputation.,0
An employee was cleaning the rollers on a printing press with a rag when a finger was caught in the press causing an amputation injury.,1
"An employee was untangling the whip line and main line of a crawler crane. The employee finished untangling the crane lines and the crane began to move. The main line caught the employee's hand, causing an amputation to the left index finger past the cuticle, an amputation to the left middle finger halfway into the nail bed, and a fractured ring finger.",0
"An employee was standing on a rack installing a fire alarm system when the rack collapsed causing the employee to fall approximately 20 feet to the ground. The employee sustained a fractured pelvis, a broken right wrist, and a laceration to his hand.",1
An employee was lubricating a tabletop paper punch machine. The machine activated and caught and amputated the employee's right ring fingertip.,0
An employee was walking to her car when she slipped on ice and fell to the ground. She suffered neck and back injuries and was hospitalized.,1
"While placing parts on a paint rack, an employee slipped and was struck on the shin by a steel beam. The wound became infected and the employee was hospitalized.",1
A line foreman was responding to an outage and was using a plastic covering to keep dirt from the end of the cable when a flash burn occurred. He was hospitalized with burns to his hands.,1
"As an employee approached her vehicle, she slipped on ice and fell breaking her right ankle.",1
"An employee was helping a customer hook up a trailer to a truck. The customer hit the gas and the truck struck the employee, resulting in a cut to the leg and a brain hemorrhage.",1
"Two employees were on a rig, adjusting arms to line up the holes with the bracket of a power wrench. The bracket caught an employee's left index finger, causing a partial amputation.",1
"An employee was cleaning a motor/chain drive on an overhead trash line. The sprocket caught the rag he was using, pulling his right hand into the chain. His right little and ring fingers were amputated.",0
"An employee was cleaning up behind a counter when she fell over a step stool, breaking her hip.",1
"An employee was vacuuming dust for epoxy floor installation when she fell approximately 9 feet into a lube bay pit. She suffered a broken rib, collarbone and three vertebrae.",1
"An employee slipped on ice while unloading feed. He fell, injuring his head on a trailer hitch.",1
An employee was repairing a chain on a forklift when the forks suddenly moved causing the employee's hand to get caught in the chain. The employee sustained a fingertip amputation.,0
"An employee was walking/standing and waiting for instructions on the floor next to a machine, when his right hand became entangled by the fiber and the machine. The middle finger was amputated.",0
An employee fell while descending a ladder and broke his left wrist requiring surgical repair.,1
"An employee tripped over another employee's foot, falling and breaking her left hip. She was hospitalized.",1
An employee was troubleshooting a light fixture and was shocked. The employee also fell 4 feet from a ladder.,1
"The injured employee was performing a parts inventory. Four parts-bins were being moved with a forklift by another employee. One of the bins collapsed and the load shifted. The upper bins fell, striking the injured employee and causing lacerations to the face requiring stitches, abrasions to the left side of the back, and fractures to the left scapula, one left rib, and the left clavicle.",1
An employee was handling a chain binder that was positioned between the gap of two deck plates inside the hold of a ship. The fourth distal phalange was pinched between the blade of a forklift and the chain binder that was being held causing an amputation injury.,0
"An employee was using a hand-held angle grinder to cut 1/8"" wire. As he was cutting the wire it became entangled in the grinding wheel and the wire struck the employee. The employee sustained lacerations to the first and third fingers on the left hand and two tendons were cut on the left index finger.",1
"An employee slipped on ice and fell, suffering broken wrists. The employee was hospitalized.",1
"A crew was removing and replacing shafts/rolls on a conveyor using an overhead crane. A roll did not fit correctly and needed to be repositioned. A wire rope choker was positioned in a basket configuration around the shaft/roll with the ends of the choker connected to the crane hook. The injured employee was holding the top legs of the choker as the operator lifted up on the hook to put tension on the choker. While the employee was holding the choker legs, the crane hook started to twist. His left hand and glove became tangled between the steel choker legs. His left index finger was stuck between the choker legs, resulting in a distal phalanx amputation.",0
An employee was skiing on an intermediate run and fell sustaining a brain bleed.,1
"On December 29, 2018, two employees were moving a drum with a forklift. One employee's hand was caught between the drum and the forks of the forklift, causing an amputation of the right middle finger.",1
An employee was trying to retrieve a box cutter that had fallen into a tape machine. The chain inside the machine lacerated the employee's left index finger. The cover had been removed from the machine at the time of the incident.,1
An employee was unjamming a package on a conveyor and caught their hand in a pinch point resulting in the amputation of the left pinky finger.,0
"An employee was helping others tuck a new sheet onto a re-reeling machine spool. His right hand got caught in the spool, and the machine pinched his middle, ring, and little fingers. He was hospitalized and his little finger was surgically removed just above the nail.",1
"An employee was traveling across the working surface on a roof, inside the warning lines. He lost his balance, stumbled, and fell from the roof to the ground, breaking his ankle.",1
An employee stepped off a pallet and fell onto the floor fracturing their upper right arm.,1
"An employee was walking a client down steps when she slipped on the wet ground, suffering a 90 percent tear to her right quadriceps.",1
"An employee was injured when he fell 25 feet from a roof. The employee sustained a broken arm, pelvis and ribs.",1
"An employee was cleaning out a compound receiving bin to remove a jam around the flow valve. When the compound receiving bin flow valve became dislodged, the compound bin started again and amputated the employee's left middle fingertip.",0
An employee was lifting CRRT bags and sustained a spine injury.,1
An employee suffered a spinal disk injury while moving a box of baby food. The employee was hospitalized.,1
An employee's right leg gave out causing them to fall to the floor and fracture their right hip.,1
An employee cut his left calf on a roll of coiled steel while cleaning a warehouse. He was hospitalized.,1
"An employee was operating a slicer when he attempted to remove a piece and his right thumb tip contacted the blade, resulting in a partial amputation to the right thumb tip. The blade was not closed at the time of the incident.",0
The injured employee was operating a pallet jack down a rack tunnel and collided with a forklift. The employee suffered a broken left tibia and fibula that required surgery.,1
"While walking down steps, an employee tripped and fell onto the concrete surface. The employee suffered a broken shoulder and was hospitalized.",1
The employee was oiling the spring on an M13 clamp. He placed his right hand on the clamp. The employee pushed down on the clamp and his right middle fingertip was amputated.,1
An employee was driving a golf cart on paved asphalt though an area that had become muddy due to heavy rain. The golf cart tipped over and the employee's left ankle was broken.,1
An employee sustained a fingertip amputation while cleaning a band saw.,1
An employee was working behind the counter when her boyfriend walked up and stabbed her in the neck with a knife.,1
"An employee was cleaning plastic debris off a machine. The employee's left index fingertip was caught in a chain and sprocket, suffering a partial amputation.",0
"An employee was operating a metal rod straightener when the machine caught his shirttail. As he tried to free the shirt, the machine caught and fractured his left arm. He was hospitalized.",1
"On December 31, 2018, an employee was trying to break up a fight between two clients when a door was slammed on the employee's right ring finger. The fingertip was amputated.",0
An employee dropped a heavy crate on his hand and crushed a finger.,1
"An employee was walking to the car at the end of a shift, slipped on ice on the sidewalk and fell fracturing the left hip.",1
"A refinery operator was changing filters in a refinery. While getting down off a step, he ruptured his quad tendons. He was hospitalized for surgery.",1
"An employee was using a stand-up forklift to transport a pallet. The forklift struck a storage structural beam, pinning his ankle against the beam and breaking it.",1
An employee fell down a stairwell that was wet resulting in a broken leg.,1
"An employee was loading casing on a rack with a PIT. One of the casings was hanging off of the rack. When the employee went to move it by hand, it rolled off and struck the employee resulting in a broken clavicle and lacerated spleen.",1
An employee was assaulted while stocking freight and suffered injuries to her head and face.,1
An employee was working on an airlock system. Rotating cups within the system lacerated the employee's left index finger; the fingertip was medically amputated.,0
An employee aggravated a back injury while lifting a 20-pound pan of chicken in the kitchen.,1
"On January 1, 2019, an employee sustained a right middle finger amputation while loading unfinished metal core plates into an automated core plate racking system.",0
"While working on a natural gas drilling rig, an employee sustained a partial amputation to their little finger.",0
An employee was working in the kitchen when a heated can of oil spray exploded and burned the employee's back and legs.,1
"On January 1, 2019, a truck driver slipped on an icy parking lot and fell to the ground, striking their head and losing consciousness. The employee was hospitalized.",1
"An employee was restocking an aircraft from a raised platform catering truck when the employee fell 10 feet off the platform to the ground. The employee's right forearm struck a truck bumper during the fall, sustaining a fracture that required surgery.",1
"An employee was using a jack. His hand was on top of the jack when it went up and crushed his left hand, fracturing it.",1
"At approximately 11:30 AM, an unidentified male attempted to exit the store carrying a power tool combination kit without paying. An employee approached the man and grabbed the merchandise. The man quickly pulled a firearm and shot the employee in the abdomen. The employee was hospitalized.",1
"An employee was working in a ditch installing drainage pipes when a backhoe slid into the ditch, breaking both of the employee's knees.",1
An employee was performing preventative maintenance on a twin screw machine when his left ring finger was caught between the pistons and was amputated.,0
"An employee was removing a pin from a machine with a foot-long bolt driver. When the pin was driven out, the bolt driver dropped, severing his left middle finger to the first knuckle.",0
"An employee was attempting to remove an obstruction from a food craft machine chain when the employee's fingers were pulled into the chain, resulting in an amputation of the left index finger to the end of the nailbed and left middle finger to the first knuckle.",0
An employee was removing a tarp from a flatbed when a bungee strap broke causing him to fall off the flatbed to the ground. The employee was hospitalized with four cracked ribs.,1
"An employee was on an 8-foot fiberglass step ladder checking faulty LED lighting in the ceiling using a volt meter when the employee made contact with 277 volts and received an electrical shock. He fell to the floor, hitting his head.",1
An employee was exiting his pickup truck when he slipped/tripped and hit his running board(s). He sustained multiple rib fractures and was hospitalized.,1
"An employee was refilling a tote tank that was on the back of a flatbed trailer when he lost his balance and fell from the trailer to the ground, fracturing his right wrist and requiring surgery.",1
"An employee was troubleshooting the hydraulic system on a customer's skid to get the hydraulic pump to run. He started up the engine and an unexpected release of hydraulic energy occurred. He attempted to open the dump valve and the discharge hose exploded with his hand on it, releasing oil and severely lacerating his right index finger.",1
An employee was guiding a crane to pick up a spool of wire. While pulling the crane hook over to the spool of wire he reduced the distance to the 19.9 phase 2 ground overhead power line. The power line then arced across to the crane's wire rope shocking the employee. He was also burned on the left wrist and hand and both feet and was hospitalized.,1
"An employee was removing a metal platform when his finger was pinched in the platform, removing skin and flesh (no bone damage) and causing lacerations.",1
"An employee was trying to pull a dock plate out at the loading dock when the plate popped out, resulting in a fingertip amputation.",0
"An Effingham Equity employee was delivering bulk feed to a customer. He had to climb a bulk feed bin to open the lid. While he was climbing the ladder, a rung broke, causing him to fall approximately 10 feet to the ground. He suffered a broken ankle.",1
A carpenter was walking on trusses eight feet above the ground at a residential home construction site. He lost his footing and fell toward the ground. He was wearing a safety harness and lanyard that activated and stopped his fall. His safety helmet fell off and he crashed into the plywood siding of the house. The collision with the plywood caused a laceration to the head requiring hospitalization.,1
"An employee was refueling a gas-powered air compressor. Fuel contacted the hot muffler and ignited. The employee suffered burns to the hands, face and chest.",1
"An employee was holding a horizontal release bar when his left ring finger was pinched between the bar handle and the floor, resulting in an amputation of the finger to the first knuckle.",1
"An employee was helping to take apart a fixture/grid display when the top grid fell and struck her above the eye, causing a laceration. She was hospitalized.",1
"An employee was watching a folder start up when printed books started jamming in the press equipment. He was attempting to pull the jammed paper out when his left hand was pulled in between the tape roller and jaw cylinder. His left hand was crushed, suffering lacerations and fractures.",1
"An employee was offloading chocolate from a tanker truck when the valve assembly closed on his finger, resulting in an index fingertip amputation.",0
"An employee was attempting to unjam a piece of cereal packing equipment when the equipment cycled and crushed the employee's right index fingertip, resulting in a fingertip amputation. The machine was guarded at the time of the incident.",0
"Three concrete panels were placed on dunnage, approximately 6"" off the ground in the batch end area of the plant. The dunnage was perpendicular to the panels and approximately 3 feet from each end of the panel. These panels were spaced about 3 to 4 feet apart and were free standing on the dunnage. At 6:40 p.m., an employee was picking up foam pieces in the same area and placing them into a 5-gallon bucket. He bent down to pick up an item about midway down the panel when the second panel from the bay door started to tip as the employee stood up. The panel came down and hit the employee about waist level (front side) and pushed him back into the third panel (closest to bay door). Both panels fell towards the south end of the building and the second panel ended up on top of the employee's right leg. The dunnage acted as a buffer to keep his leg from being fully crushed. He was hospitalized with a broken right tibia and torn right knee ligaments.",1
"An employee was raising dock doors to inspect a trailer for unloading and loading when the door came down. The corner of the door struck the employee on the inside part of the left knee, resulting in a small laceration/puncture.  The knee became more painful while walking and the employee required hospitalization. The dock door was not secured with a chain at the time of the incident.",1
"An employee was driving a stand-up powered lift truck down an aisle. He was about to strike a parked powered lift truck when his left hand went outside the cage and struck the second truck. He experienced swelling and pain in his left hand, requiring surgery.",1
An employee was removing an injection bottle from a riser pole using an extended fiberglass pole when he felt a strain in his chest.,1
"An employee was using a band saw to trim/cut pork skins when the saw cut his right thumb tip, resulting in a thumb tip amputation.",0
"An employee was replacing a belt associated with a pasting machine cutter when a second employee jogged the machine via a two-hand control. As the second employee activated the two-hand control, the first employee's hand slipped into the cutting head, severing three fingers between the first and second knuckle. One finger was amputated and two other fingers may require amputation.",0
An employee had finished repairs and adjustments on the small piece folder machine. The employee was confirming proper operation of the machine when their right sleeve was caught by a moving part and drawn into the machine causing a severe laceration on the palm of their right hand. The machine was unguarded at the time.,1
"An employee was inside a cargo hold on a ship, guiding in a steel slab load, when the load hit a two-by-four. The two-by-four then popped up and pinched the employee's pinky fingertip between it and the load chain, resulting in a partial finger amputation.",0
An employee lost his balance and fell off of a step ladder onto a concrete floor. The employee was hospitalized with a compound fracture to the wrist.,1
"An employee was assisting a chainsaw operator with felling a tree when the chain bucked, striking and lacerating him on the lower left leg.",1
"An employee was at a customer's home installing home theater equipment when the employee slipped on icy stairs and fell, suffering a broken tibia and fibula. The employee was hospitalized.",1
An employee was walking on a carpeted sales floor when the employee fell to the floor and fractured the left femur.,1
"An employee was walking down stairs and tripped and fell, fracturing her left ankle.",1
"An employee was reaching into a cart when a door closed, smashing her right little finger. She was hospitalized.",1
"On January 2, 2019, an employee was removing an iron pipe cap from a pressurized water line when the line burst and the cap struck him, fracturing his leg.",1
An employee suffered the partial amputation of his middle finger during the installation of a 6-inch diameter water line inside a trench.,0
"An employee was cleaning a machine area when the machine caught the employee's pant leg, causing a fracture that resulted in surgical amputation of the leg.",0
"On January 2, 2019, at 11:30 a.m., an employee was transferring anhydrous ammonia from bullet tanks to two 1,000-gallon nurse wagons when the cross-over line connecting the nurse wagons ruptured, exposing the employee to anhydrous ammonia. He suffered chemical burns to the right side of his face and his respiratory system, requiring hospitalization.",1
"An employee was using a hand truck to unload his delivery truck when he turned around and slipped. His hand truck load also slipped and fell on his left leg, fracturing it in two places.",1
An employee was operating a punch press and sustained a laceration on his left index finger. The machine was guarded at the time.,1
"An employee was operating a double pallet jack, carrying plastic pallets. As he was dismounting, he put his hand on a stack of plastic pallets for balance. The momentum of the pallet jack caused the backrest to strike and mash his hand. When he pulled his hand away, he suffered a fracture to his middle finger and a laceration to his ring finger.",1
"An employee was adjusting the hydraulic fluid pressure valve on a thumper truck when hydraulic fluid spewed from the pressure valve onto the walking surface of the thumper truck. The employee then slipped and fell approximately 6 feet from the truck to the ground, sustaining four broken ribs on the left side and a left lung contusion.",1
An employee was operating a table saw when the employee's hand slipped. The blade then amputated the employee's index finger.,0
An employee was unjamming corrugated sheets from a pre-feeder machine when his right arm was caught in the self-closing gate.,1
"An employee was working on top of a mezzanine. He was getting ready to come down from the mezzanine floor when he fell approximately 12 feet from a fixed ladder to the lower level, suffering forehead and kneecap injuries that required stitches, a concussion, a swollen right eye, partial hearing loss in the right ear, and four broken ribs.",1
"An employee was changing plates on a paper envelope machine. He was holding a metal plate with one hand and using his free hand to jog the machine when his right hand was pulled into the machine's moving parts. His middle finger sustained severe lacerations that required stitches, while the tip and first joint of his pointer finger were amputated.",1
"An employee was moving a chair in a break room. The employee's feet became entangled in the feet of the chair and the employee fell to the floor, suffering a broken right hip.",1
"On January 3, 2019, an employee was setting up steel beams when a beam fell and struck the employee's left ankle, causing a fracture and requiring hospitalization.",1
An employee was standing on the first or second step of a 6-foot step ladder.  He was applying drywall mud to the ceiling tape when he lost his balance and fell to the ground.  He suffered a broken hip.,1
"An employee was working on a skinning machine when his glove was caught in the machine, resulting in an amputation of his right index fingertip.",0
An employee was burned on the right side of his body by 176-degree water that discharged from a pipe.,1
"An employee was attempting to clear scrap from a cavity on a machine's rotating drum. When he extended his arm and tried to clear the scrap, the drum pulled his left index finger into a pinch point between the drum and a form roller. As he pulled his finger away from the pinch point, the nail and a small portion of skin were removed (de-gloved) from his fingertip, exposing a small portion of bone and resulting in an amputation. The machine was guarded at the time of the incident.",1
"While descending a ladder, an employee missed the bottom rung and contacted the floor, suffering a hip fracture.",1
"An employee was manually lifting/flipping a large steel plate when he slipped on some grinding dust and lost his footing. The steel plate, which measured approximately 25"" X 28"" X 2.5"" fell, crushing the employee's right hand. He sustained amputations to his index and middle fingers and was hospitalized.",1
"An employee was cleaning a crumble maker roll machine when his left hand entered the machine and was drawn into the roller, amputating four fingers up to the last knuckle. The machine was running at the time of the incident.",0
"An employee was standing on the front of a utility trailer near the end of a forklift load that was being secured. Only one end of the load was secured when the forklift was removed. The load proceeded to lean over and fall toward the employee, knocking him to the metal fabricated loading dock. He suffered a broken leg, broken collarbone, shoulder blade contusions, and a collapsed lung.",1
"While using a tool to unclog a shredding machine, an employee was caught by the machine's moving parts, suffering lacerations to the right index and middle fingers.",1
"A J.B. Hunt employee was walking across a crosswalk toward his parked truck. He was struck by another J.B. Hunt employee in his personal vehicle, suffering microfractures around the left eye, a bruised right knee, and a fractured cranium on the left side near his hairline.",1
"An employee was operating an articulating hauler and preparing to dump concrete onto a designated site when the earth gave way beneath the truck, causing it to fall and topple on its side. As a result, the employee suffered a broken femur.",1
"An employee was attempting to clear a jam on a truck body fixture when a pneumatic clamp on the fixture cycled onto the employee's hand, amputating the middle fingertip.",0
"An employee was standing under a roll-up door when it automatically closed, striking her on the head. She fell to the concrete surface and suffered a broken right femur.",1
"An employee was installing petroleum piping and working with a dispenser sump at a work site when a small explosion occurred, causing burns to his body.",1
An employee bent over to pick up a binder and suffered a fractured vertebrae.,1
"An employee identified a damaged product on a line conveyor system, about to be caught up into a leg of operations. He tried to remove it as it approached a break in the covered line and his right index finger was caught in the product's nylon material. The chain and sprocket amputated the fingertip.",0
"An employee's right index finger was caught in a foiling machine, causing a traumatic distal amputation to the finger.",1
"An employee was engaged in demolition operations and pulling up a plastic sheet when he fell backwards, striking his head on the gravel ground. He suffered a laceration and lost consciousness, requiring hospitalization.",1
An employee was performing the third bend on a piece of metal in a hydraulic press brake when the machine amputated his left middle finger midway down the fingernail.,0
"On January 3, 2019, at 10:45 a.m., two employees located at ground level pulled a duct transition piece out of a pit conveyor through the pit conveyor ladder access area. As the first employee was exiting the pit, he put his left hand over a 2-inch metal drip edge that goes around the pit access area. At the same time, the second employee was setting the transition down next to the metal drip edge, striking the first employee's finger. The first employee's left middle finger was pinched between the duct transition and the metal drip edge, suffering a partial traumatic metacarpophalangeal amputation.",0
"An employee was on a loading dock about 4 feet high, draping a tarp over 16-foot-long elevator rails. The employee fell backward off the dock, breaking an ankle and a knee.",1
"An employee attempted to sit on a table and fell to the floor, suffering a fractured back/spine.",1
"A temporary employee was parking a forklift and exited the vehicle. The employee's left foot was then pinned between a guardrail and the forklift, sustaining a laceration, soft tissue damage, and ligament damage. The employee was hospitalized and had surgery. The forklift had not come to a complete stop at the time of the incident.",1
"An employee was walking next to a pile of I-beams when a 12-inch I-beam slid off the pile and fell on the employee's right lower leg, fracturing the tibia and fibula.",1
"An employee was operating a golf cart when the employee's knee struck an I-beam, fracturing the patella. The employee's knee was outside the vehicle at the time of the incident.",1
"An employee operating a standing forklift struck a rack, and the employee's head became pinned between the forklift and the rack.",1
"An employee was riding a horse while herding cattle when the horse tripped. The employee fell forward into the saddle and then onto the ground, fracturing multiple ribs.",1
"An employee was standing next to a propane heater when his clothes caught on fire, burning his lower legs.",1
"An employee slipped and fell in a restroom, suffering an injury to the left ankle that required surgery.",1
"An employee was walking across the furnace floor and was passing an I-beam column at the same time that a forklift was in operation. The operator did not see the employee due to the I-beam and hit him with the forklift, injuring his head and chest. He was hospitalized.",1
"An employee was grinding a large stainless steel part on a double-end belt grinder when his right index finger was caught between the belt and the grinding wheel, resulting in a fingertip amputation.",0
An employee was sweeping a floor when a cotton lint-cleaning machine partially amputated the three middle fingers of his right hand. The machine was guarded at the time of the incident.,0
An employee was conducting maintenance on a cut-up system (merchandiser) when the employee walked by a photo-eye and triggered the log kicker. The log kicker rolled a log into the employee's lower leg and broke it.,1
An employee suffered pulmonary edema after participating in a high-altitude simulation.,1
"An employee was on a stepladder cleaning a bathroom ventilation unit. He lost his balance and fell off the ladder, hitting his head on the wall and then landing on his shoulder on the vinyl-covered concrete floor. He was hospitalized.",1
"An employee was servicing an overhead hoist while standing on a trimming table. The employee came down from the table and their right foot was caught on the crossbrace, causing the employee to land awkwardly. The employee suffered fractures to the right ankle, fibula, and tibia.",1
"An employee was bending down to lift a pallet when pain caused his back to seize up and he fell backwards. He suffered a back strain or possible disk injury, requiring hospitalization.",1
"A crane two-blocked while lifting a boat railing. The cable snapped and the headache ball fell onto an employee, severing the employee's leg.",1
"A temporary employee was backing a forklift up to a charging station when the employee's left foot was crushed between the forklift and the charging station, requiring surgery.",1
"While pumping concrete, an employee was struck by the boom of a pump truck when the right front outrigger sank into the ground. The employee was hospitalized with a broken left arm, dislocated right hip, and wound on the right leg.",1
"An employee was delivering mail when a dog bit off the employee's left pinky fingertip, causing an amputation from the knuckle up.",0
An employee was at a machine loading plastic film on a cardboard tube when the employee's wrist was fractured in the machine's roller.,1
An employee was attempting to remove a piece of cardboard from a conveyor when one of his left-hand fingers was pinched between the bars and the cross member.,1
"An employee tripped and fell while walking to a vehicle in the parking lot, suffering a fractured right elbow.",1
"An employee either hit his head while exiting a truck and fell to the ground, or he was standing on the truck catwalk and lost his balance, causing him to fall. He suffered a concussion and multiple contusions.",1
"An employee was dumping a load of pulp material from a tractor trailer when part of the load became stuck in the elevated position, causing the load to become unstable. The trailer then flipped over, ejecting the employee out of the cab and onto the ground. The employee suffered fractured ribs and fluid on the lung.",1
An employee tripped over a box after putting away a tablet in a cabinet. She suffered fractures to her left arm.,1
An employee suffered a partial amputation from a grinder while cleaning up paper.,0
An employee's finger was caught in a door hinge as he held the door open for other employees to enter. The left middle fingertip pad was amputated.,0
"An employee was adjusting the pin lock on a chassis that had a container that was not sitting flush to it. The employee struck the pin multiple times with a hammer in the left hand and chisel in the right hand. On the last swing of the hammer, the chisel hit the pin and then slipped, sending the employee's right ring finger under the container as it fell flush to the chassis. The employee's right ring finger was crushed between the chassis and container, resulting in a fingertip amputation.",0
"An employee was climbing down a ladder attached to a preservation oil truck when he slipped and fell approximately 6 feet to the ground, suffering broken ribs and a collapsed lung. He was hospitalized.",1
"A temporary employee was lifting a bundle of wood with other employees when the bundle of wood slipped and fell on his hand, pinching and fracturing his right index and middle fingers.",1
An employee was removing a vehicle's wheel. The employee's left middle finger was caught between a spoke on the trim and the brake caliper and was amputated.,1
"An employee was holding a door when the employee stepped back and lost balance, falling down six to seven concrete steps. The employee suffered a fractured eye socket and facial lacerations.",1
"An employee was troubleshooting a conveyor belt when the employee's right arm was caught in the conveyor belt, breaking the forearm, injuring the wrist, and pulling skin from the top of the hand.",1
"An employee was picking up a cleaning device sitting on top of a mixing vessel when he fell about 9 feet from the vessel, hitting his back, head, and buttocks on the mobile stair ladder during the fall.",1
"An employee was about to sit on a chair but missed the chair and fell on the floor, fracturing her left hip.",1
"An employee was putting a membrane on the roof of an exterior walk-in cooler at a country club. The employee fell from the cooler, suffering injuries including a skull fracture, brain bleed, a fracture to the upper jaw, and a torn ear.",1
"An employee was loading a pallet of empty shells in the back of a trailer while standing on a raised liftgate when his foot became stuck under the pallet jack. While attempting to remove his foot from under the jack, he lost his balance, pulled down on the pallet jack handle, and fell on the floor. He landed on his right hip and suffered a contusion. The jack handle was engaged when he fell, causing the jack to move backward off the liftgate and fall on his left foot. He suffered a 1-inch laceration on his left foot and bruise on his left knee.",1
"An employee was changing the head on a caser machine. An unsecured piece of equipment fell on the employee's hand, causing the amputation (without bone loss) of the right index fingertip.",0
"An employee was pushing containers off of a machine's conveyor belt. Her right hand was on the containers that were accumulated on the belt when her right pinky finger was caught between the machine's product lane straightener mechanism, resulting in a fingertip amputation.",0
"An engine backfired and ignited gas in the building, causing an explosion and fire that burned an employee's face and neck.",1
"An employee was driving a walkie/rider pallet jack when it suddenly stopped. He fell about 6 inches to the concrete floor, breaking his hip.",1
"An employee was moving material through a plant. The employee's right foot was caught between a conveyor and the transfer car, suffering a laceration.",1
"An employee was on a trailer attempting to secure drilling equipment to the trailer for transport when the employee fell approximately 5 feet off the trailer to the ground. The employee suffered a concussion, loss of consciousness, and hand and wrist contusions.",1
"A temporary employee stepped inside a packaging tote to collect parts and move them into a smaller container. Upon exiting the packaging tote, his foot was caught on the side of the tote, causing him to trip and fall to the floor. He broke his hip and was hospitalized.",1
An employee was operating a walkie stacker and pinned their left foot and ankle against a storage shelf on the opposite side of the aisle causing a fracture and laceration to the foot and heel.,1
"While responding to a 911 emergency call at a residence, a paramedic was overcome by secondhand smoke and suffered an asthma attack, requiring hospitalization.",1
"An employee was on a stepladder, pulling product down from a shelf, when she lost her balance and fell backwards. She broke her right leg and was hospitalized.",1
"An employee was performing emergency repairs on a roof when he noticed that the wind had blown a piece of insulation across the roof to the edge. As he went to retrieve the insulation, it caught the wind and he was pulled off of the roof, falling approximately 30 feet to the ground. He was hospitalized with fractures to his wrists, two broken fingers, and cracked disks in his spinal column.",1
"An employee was standing on a top drive unit (which was sitting on a skid about 18 inches off the ground) helping to test it. The unit was in vertical position at that time. The employee touched a bail that had a sling wrapped around it and the bail fell to a track. The bail brushed the employee’s shin and then landed on his right foot. As he pulled his foot out, he fell backward about 5 to 7 feet away from the bail. He was hospitalized with a bruised metatarsal and tarsal on his right foot and bruised back. He also required stitches on his left arm.",1
"An employee fell to the snow surface while skiing to a duty station on a mountain, fracturing the left tibia and fibula.",1
"An employee was troubleshooting a packaging machine and adjusting the media when his left index finger was caught in the perforation blade, resulting in a traumatic amputation of the distal phalanx.",0
An employee was removing a valve from an air hose when his fingertip was amputated.,0
"An employee was walking into work when she slipped and fell in the parking lot, striking and breaking her elbow on the ground. She was hospitalized.",1
"An employee was offloading a jack when the back right wheel slid off the side of the belt loader and struck his right ring finger, fracturing it.",1
"An employee was holding a cat in place so an IV could be administered when the cat became agitated and bit the employee's right hand. The bite puncture wounds became infected, requiring hospitalization.",1
"An employee was walking in a customer's basement, tracing an old cable line, when he lost his balance and fell into an open pit that housed an old water tank. He struck the water tank, suffering intestinal bruising and a small liver laceration.",1
An employee was setting a vehicle on a lift when the lift began to rise. His right ring finger was caught between the vehicle and the lift. He was hospitalized.,1
An employee suffered a lumbar strain while lifting and carrying boxes of merchandise up and down a ladder.,1
"An employee was on a deck on an elevated section of an interstate, shaking out some pans. The employee fell to the ground, suffering broken bones.",1
"An employee was helping to lower an exhaust catalyst to the ground with a rope when it created a loop that caught the employees' right gloved finger, resulting in a fingertip amputation.",0
An employee was observing and troubleshooting cement powder transfer equipment. He placed his right hand into adjoining piping while clearing cement powder from the pipe. His fingers entered the machinery and two of his fingers were struck by moving parts.,1
"An employee was working from an extension ladder, hanging a gutter on the outside of a 1.5-story barn. The employee came into contact with a hornet's nest and fell from the ladder, landing on the ground about 10 feet below and fracturing two vertebrae.",1
"An employee was in the bucket of a bucket truck, about 16 feet above the ground. A semi truck driving down the road struck the bucket, throwing the employee to the ground. The employee suffered fractures to the leg, elbow, wrist, collarbone, teeth, etc., and was hospitalized.",1
"An employee dropped a bit behind a railroad wheel that was leaning against another wheel. The employee was pulling the wheel to its vertical position to retrieve the bit when the wheel fell backwards onto the employee's right lower leg, fracturing it. The employee also fell and attempted to break the fall, resulting in a fracture to the right wrist.",1
An employee was cutting a loose bar or rebar using a handheld saw. The sparks generated by the cutting process ignited the employee's right pant leg. The employee suffered burns to the right leg.,1
"An employee was trying to unstick a chicken breast from a breast slicer machine when the slicer lacerated the employee's left hand, resulting in a medical amputation of the hand.",0
"An employee was working on an elevated surface when he walked across a board to grab a piece of equipment. Upon returning to his work area, the board he was walking on gave way and he fell 10 feet to the concrete below, breaking his elbow. A harness was not worn at the time of the incident.",1
"An employee was cleaning at a construction site when a board with a nail in it caught her pant leg, causing her to fall from the second to first floor. She was hospitalized with a broken right heel.",1
"A foreman and his crew were about to take a section of a crane hook and move it into position. The foreman stopped work, noticing something wrong, and the pipe shifted and struck his hands while they were on the handrail. He suffered amputation injuries to his left ring and little fingers.",0
"An employee was loading paper into a die press when the employee's finger was caught by the nipper, resulting in the amputation of a finger.",0
An employee was operating a powered industrial truck inside a trailer. His finger was caught between the exterior frame of the truck and the inside wall of the trailer.,0
An employee was walking on the company road to work when he was struck by another employee who was driving a car away from the premises. He suffered a spinal injury and head laceration.,1
An employee was lifting a microwave to place on a pallet when he felt a pop in his neck. He was hospitalized with a fractured neck.,1
An employee was walking away from a pallet to begin cleanup when he slipped/tripped over a strip of banding material and fell to the floor. He broke his hip.,1
"An employee was on a loaded barge when he leaned over the stern of the barge and attempted to free the port stern wire from the lower port knee rubber. He was then crushed between the port knee and the barge, suffering a broken leg.",1
"An employee was standing next to a building post when a tote, carried on a forklift, crushed his right ring finger. The tip was amputated.",1
"An employee was operating a standing tugger, which came into contact with a forklift. The corner of a pallet hit the employee's leg, breaking the tibia.",1
"Two overhead cranes collided. The glass they were transporting fell, striking an employee. The employee was hospitalized.",1
"An employee was on warehouse racking during disassembly when a front piece of the racking swung out and the deck boards gave way, allowing the employee to fall approximately 6 feet to the ground. The employee suffered a fractured right leg.",1
"An employee tripped on a cord and fell on the concrete floor, landing on the right knee. The employee was hospitalized with a right knee contusion and right tibia fracture.",1
"An employee fell from a snow-/ice-covered two-story residential roof while removing snow. The employee landed on their back and cracked two vertebrae. The employee was hospitalized, requiring surgery.",1
"An employee was working in rooms along a hospital hallway, performing respiratory treatments for her assigned patients. She noticed a bleach smell in the hallway as she entered a room. While in the room she continued smelling bleach, so she put on a surgical mask and closed the door behind her. Later, after working in other rooms and removing her mask, she entered a room with a recliner that had been wiped down with bleach shortly before she entered. She was hospitalized, suffering respiratory distress.",1
"An employee was washing buckets when the employee's left pinky finger was caught in a door jam, resulting in a fingertip amputation.",1
"An employee was cutting an abandoned cable when an arc flash occurred, causing electrical burns to the employee.",1
"An employee was on top of an injection molding machine, looking into the machine with a flashlight to find jammed material. The material splashed up onto the employee's face, neck, and arm, causing second- and third-degree burns.",1
"An employee was driving a forklift while another employee drove a second forklift behind him. The first employee slowed down and made a U-turn. The second employee did not see the first employee and the two forklifts collided. One of the employees suffered a laceration on the left foot and a fractured heel bone, requiring hospitalization.",1
"An employee was emptying a 4-yard garbage dumpster. The employee's right middle finger became wedged between the garbage container and the garbage truck, suffering a partial amputation of the fingertip.",0
"An employee was emptying a garbage container when the employee's right middle finger became wedged between the garbage container and the garbage truck, resulting in a partial amputation of the fingertip.",0
"An employee was attempting to clean the printing plates of an envelope machine with a towel when his fingers were caught in the printing rollers, resulting in a partial amputation of the third and fourth right-hand fingers.",0
"While walking on the top floor of a parking garage, an employee slipped and fell to the ground, suffering a broken right leg.",1
"An employee was doing longshoring work inside a vessel. He stepped into a ladderway that was covered by cardboard, fell 17 feet, and suffered spinal injuries requiring hospitalization.",1
"On January 7, 2019, a maintenance employee was replacing a fork on a forklift when the fork smashed his finger between the fork and the forklift. He was hospitalized with a broken right middle finger.",1
"On 1/07/2019, an employee suffered an abdominal hernia while moving pallets with a pallet jack, requiring hospitalization and surgery.",1
"An employee opened a transformer cabinet and an arc flash occurred, causing second degree burns to the employee's hands.",1
"An employee was preparing a truck for loading when he slipped on ice and fell, injuring his head on the walking surface.",1
"An employee was running wire while standing on a stepladder. The employee slipped and fell 4 feet to the ground, suffering a broken femur.",1
An employee was attacked by four dogs while delivering mail. He received bite wounds from the top of his head to the back of his calf. His ears were avulsed.,1
"An employee was wearing cloth gloves while holding a 50-pound concrete brace that was attached to a wall panel being lifted by a 200,000-pound capacity crane. The concrete brace moved toward his left pinky finger, and it was caught between the concrete brace and the brace foot, resulting in a finger amputation above the first knuckle.",0
"An employee was on a van reaching for a ladder when he slipped on the van bumper and fell to the ground, injuring his knee.",1
"An employee was relieving the pressure on a tank lid. He pulled the first and then second latch to let the pressure release, then hit the third latch with his foot.  The third latch opened and the lid struck him, knocking him up and over the railing onto the ground below. He was hospitalized for a fractured wrist and spleen and back injuries.",1
"An employee was removing parts from an oven. The employee removed one part with tongs, went to remove the second part, and lost balance. The employee's left hand touched the first part and was burned. The employee was hospitalized.",1
"An employee was taking off his coat to start his shift when his left index finger hit scrap metal, causing a laceration that required hospitalization and surgery.",1
A temporary employee was taking a battery-powered pallet jack up a loading ramp when the jack slid off the ramp and rolled over the employee's left leg. The employee sustained a lower leg fracture.,1
"On January 8, 2019, at 6:15 a.m., an employee was trying to unplug shot beads from a die cast machine. His finger was inside the area where the machine discharges the beads when the machine activated, amputating his right index fingertip.",0
"An employee was cleaning up in a tire and battery shop when he fell to the floor, suffering a broken left hip.",1
"An employee put his weight on a trailer hitch while getting up from connecting a chain. The hitch was not connected to the ball and sank down, catching his finger and later resulting in fingertip amputations.",0
"An employee fell off a step stool to the floor, suffering three broken ribs and a back injury. She was hospitalized.",1
"An employee was working from a 42-inch-high platform while unloading a trailer. He fell from the platform, breaking his left hip.",1
A leg skinner machine amputated an employee's left ring finger above the knuckle. The machine was guarded at the time of the incident.,0
"An employee fell 16 feet to the lower floor while pulling electrical wire and sustained back, neck and hip injuries.",1
"On January 8, 2019, an employee slipped on ice and was injured, requiring hospitalization.",1
"Two employees were trying to roll an I-beam that was on top of another beam when the beam slipped off the bottom beam and fell onto the injured employee's right hand, crushing the ring fingertip and resulting in an amputation.",1
"An employee was in a parking lot, walking into work. The employee slipped and fell on the snow/ice, suffering a head injury.",1
An employee was riding in an aerial lift when it contacted a high-voltage power line. The employee was hospitalized with burns to the torso and upper body.,1
"An employee was walking back to his utility vehicle while doing landscaping work. He tripped on the sidewalk and fell, hitting his head on a tree. He suffered a left eye injury and a broken nose and was hospitalized, requiring surgery.",1
An employee fell from an 18-foot ladder while doing roofing work. The employee suffered a leg fracture and was hospitalized.,1
"While running wires at the bottom of an excavation, an employee slipped on clay and fell resulting in a broken right tibia.",1
An employee's hand was caught in a printing press roller. The employee suffered an open fracture of the right thumb and a partial amputation of the thumb tip.,0
An employee was walking from a front office to a mailbox located outside when the employee slipped and fell to the floor at the front door. The employee was hospitalized and had surgery for a fractured right hip.,1
"On January 8, 2019, an employee was helping move a wooden board along a chain system. The board fell and struck the employee's left little finger, breaking it.",1
An employee was operating a press brake when it was activated via the foot pedal and crushed the employee's fingers.,1
"At about 9:35 a.m. on January 8, 2019, an employee was clearing a jam in the bagel slicing area on a production line. She came into contact with a moving pressure conveyor and her left index fingertip was amputated. The bagel slicing area was guarded at the time of the incident.",0
"An employee collapsed while walking and struck his head on a wooden crate, suffering a laceration above the right eyebrow.",1
"On January 8, 2019, an employee was holding a fixture in place when their right ring finger was caught between a flange and a target nut resulting in amputation of the finger.",0
An employee was standing on the ground dumping from a hopper rail car while operating a pneumatic car door opener. He was then struck by a compressed air hose and the car door opener while being partially dragged on the ground by a utility vehicle for 15 to 20 feet. He was hospitalized with multiple contusions to the body.,1
An employee was approaching an aircraft door to recover the aircraft when the pressurized door released and hit the employee. The employee lost a tooth and suffered right arm and facial fractures.,1
"An employee was attempting to remove sheet rock that was blocking a shut-off valve when he became caught and fell with the sheet rock, fracturing his lower leg in three places.",1
"An employee was working from an aerial lift to replace telecommunication lines. He lifted the telecommunication line onto his shoulder to get a lashing machine out of a tree. An employee on the ground pulled the lashing line and caused it to come into contact with an overhead power line. The employee in the lift was shocked, resulting in an amputation of his left arm from the elbow down.",0
"An employee was maneuvering a steel transport cart next to a similar steel transport cart when his left fifth digit was pinched between the two carts, causing a laceration, fracture, and dislocation to the distal phalange.",1
"An employee was placing an anchor and was aligning the Kelly bar when his left index finger was pinched between the anchor and Kelly bar, resulting in a partial amputation to his fingertip.",0
An employee was reaching for a scrap piece of wood and contacted the sawmill blade resulting in the amputation of digits on the left ring and middle fingers.,0
"An employee was washing down brick from a scaffold when the employee fell approximately 25 feet from the scaffold to the ground/wall. The employee was hospitalized with a broken leg, broken hip, and broken nose.",1
An employee was stepping off a forklift when his foot was caught between a guardrail bollard and the rolling forklift. He fractured his ankle.,1
"An employee was working on a conveyor system when the rollers caught his left ring finger, amputating part of it.",0
An employee was conducting welding operations when a steel pipe rolled onto his leg. His lower left leg was broken.,1
A line crew was digging post holes with a vehicle-mounted auger. The crew had finished digging a hole and was attempting to stow the auger back onto the vehicle. They had just stowed the Kelley bar when a restraining strap broke. The Kelley bar then sprung loose and hit an employee in the chest. The employee was hospitalized with a spleen injury and seven broken ribs.,1
"An employee poured molten iron into a mold. The molten iron ran out of the mold at the bottom corner of the jacket and onto the employee's right foot causing a burn to the top of the foot, which required hospitalization.",1
An employee was helping a forklift operator load a 1000 lbs. marble slab when the slab slipped out of the clamp and fell onto his left big toe amputating it.,0
"Employees were waiting on a delivery truck to unstrap electrical panels and control panels for unloading. The driver of a tractor trailer unstrapped the electrical and control panels so the employees could unload them. An electrical panel slipped and hit a control panel, which then struck the injured employee, knocking him to the ground where he hit his head on the concrete. He was hospitalized with a contusion to the back of the head and ligament damage to his right knee.",1
"An employee was up righting a table with another employee when the other employee dropped the table and the tabletop fell on the injured employee's finger, resulting in a right middle fingertip amputation.",0
"An employee was running a mulch bagging line when the employee's clothing became stuck in the conveyor, resulting in a fractured upper arm that required surgery.",1
"An employee was conducting maintenance work on an overhead garage door when the employee's thumb was caught in the overhead door's chain drive, resulting in a partial left thumb amputation.",0
An employee was standing on a semi truck trailer attempting to move a pipe when the employee fell 3 feet off the trailer to the frozen ground.,1
An employee was entering the building when they slipped and fell onto the ground. The employee sustained a fractured left femur and was hospitalized.,1
"An employee was working on a scaffold setting up a 30"" pipe for pre-heat. The pipe was tack-welded where the set-up was taking place. Workers on the other end of the pipe removed the pipe fitting dogs, and 15 minutes later the tack welds at the set-up area failed. The employee's lanyard was between the pipe and the scaffold deck at the time. When the tack weld failed, this caused the pipe to fall and pinch the employee's left knee against the pipe, cracking the fibula.",1
"An employee was using a 10-foot water lance to clean the ash off of a wet sifting conveyor located underneath an incinerator when the lance made contact with hot ash, causing the hot ash to make contact with his face. He sustained first and second degree burns to his face, neck, arms, and hands, requiring hospitalization.",1
"An employee was running a line when the case elevator jammed. He climbed up to the level of an overhead conveyor belt and attempted to release the jam. His left arm was struck by the case elevator when the jam released, breaking it. The case elevator was guarded at the time of the incident.",1
"An employee was installing new lines and working around 2700-volt power lines. An arc flash occurred and the employee sustained burns to the jaw, chest, and arms.",1
"An employee was assisting with the changing of steel banding material on an automatic bander. Other employees completed their work and exited the fenced area. When the gate closed, the machine started moving a bundle of pipe down the rollerway where the injured employee stood, pushing him off his feet and pinning his left leg against the roller. This caused a laceration to the side and back of the left leg above the knee and a fracture to the right ankle requiring surgery and hospitalization.",1
An employee reached into a lathe near the point of operation to adjust a lubricant nozzle. His shirt became entangled on the rotating work piece and the employee was pulled into the lathe. He contacted the rotating chuck and received multiple cuts and lacerations and a loss of consciousness.,1
"On 01/09/2019 at 7:25 PM EST, an employee was walking from her vehicle to the seasonal entrance when she tripped and fell on a curb, fracturing her right elbow and requiring hospitalization.",1
Employees were operating/driving a boom lift back to the shop and were crossing a road when a pickup truck struck the lift. One employee was injured and sustained five transverse process fractures and one spinous process fracture in the L2-L4 vertebrae.,1
"An employee attending an operating room event experienced low blood pressure and collapsed, striking his head when he fell. He was hospitalized with a skull fracture.",1
"An employee fainted while writing a report on a bench, suffering a laceration to the forehead.",1
An employee slipped and sustained injuries to her right foot/ankle while selecting products in the freezer.,1
"An employee was transitioning from a ladder to the upper level platform of a 3-buck tubular welded frame scaffold when the employee fell off the ladder to the ground, requiring hospitalization for a fractured heel and possible cracked vertebrae.",1
An employee's fingers contacted the spinning blade of a table saw and were amputated.,1
An employee was cutting tree branches with a chain saw when it kicked back and lacerated the employee's left arm.,1
An employee was hospitalized with a fracture to the right pinky toe after slipping and falling in the kitchen while leaving the restaurant.,1
"An employee was using a roll of shrink wrap to wrap a skid of plastic lugs. He was using a plastic ""handle"" that inserts into the cardboard tube holding the shrink wrap. He was wrapping the skid from the bottom to the top. As he neared the top and was pulling the last wrap tight, the handle came loose from the roll of shrink wrap . He stumbled a few steps and fell to the floor. The employee was hospitalized with a fracture to the left femur.",1
"An employee was connecting a hook and winch cable to a waste container when his left ring finger became tangled in the cable, resulting in a fingertip amputation with no bone loss.",0
"On 1/09/2019, an employee tripped over a floor mat under a chair and fell breaking her tibia in five places.",1
"On January 9, 2019, an employee was crossing the road when a vehicle ran a stop sign and struck an SUV driving down the road the employee was crossing. The SUV spun and struck the employee in the crosswalk. The employee was hospitalized with a fractured pelvis.",1
An employee fell to the ground while walking across a snowy/icy storage yard and sustained an injury to the upper left arm.,1
An employee was operating the patty machine and was wiping off excess meat when the machine cycled and amputated the employee's right index finger between the first and second distal joints.,0
"An employee operating a corrugated machine attempted to jostle a metal tube that was not working correctly.  When the tube moved, it activated a sensor that lowered an elevator gate down on the three middle fingertips of the employee's right hand. Her fingertips were amputated.",1
An employee was operating a fork truck during fork truck training. At approximately 12:05 PM the fork truck collided with a bollard outside of the building pinning the employee's foot between the fork truck and the bollard and injuring the ankle.,1
"An employee working as a climber was removing a storm damaged tree that fell on a communication line. The employee was tied to an adjacent tree and the communication line was secured to keep it from snapping back. The climber started making small cuts on the tree to release tension slowly. On the final cut, the communication line released suddenly and struck the employee in the face. The employee was hospitalized with facial contusions, a swollen left hand, and a concussion.",1
An employee was assisting a customer to unload their electronic recycling items from the trunk of their car. The customer's foot slipped and put the car into reverse slamming into the employee and pinning him against a utility cart and bollard pole. The employee sustained a compound fracture to the leg which lead to surgery and leg amputation.,1
"A crew was rigging down when a winch line became hung up on the operations platform. The platform then failed and an employee was caught between the rails and control panel, suffering bodily contusions.",1
An employee cycled a saw/weld machine using the two-handed control. The machine did not immediately cycle so the employee attempted to pull the workpiece out. The machine then cycled and amputated the first digit of the employee's left index finger.,0
"An employee was ascending a ladder toward a roof access hatch when the employee mis-stepped and lost balance, falling to the floor. The employee lost consciousness and was hospitalized with a severe head injury.",1
An employee operating a stand-up forklift went to exit the forklift while it was in motion and their foot was crushed between the forklift and a guard rail.,1
"An employee was sitting on a stack of three plastic milk crates. When she stood up, the crates became unstable and upended, causing her to fall and land on one of the crates. She suffered a contusion and was hospitalized.",1
"An employee was washing out a concrete pump when their hand became stuck in the cylinder. The middle, ring, and pinky fingers were amputated above the second joint.",1
"An employee was loading shocks onto a machine when the machine cycled and the employee's right pinky finger was pinched between the machine cuff and shock. As a result, the employee's right fifth digit was amputated to the first knuckle.",0
A driver for S&H Transportation was using a tugger to unload his trailer. A forklift operator employed by another company collided with him as he was exiting the trailer. The S&H Transportation employee was hospitalized with two broken ankles.,1
An employee was cutting tripe using the band saw and amputated the little finger on his right hand.,1
"An employee was walking through the front doors of the facility. She was holding the door with her left arm and holding two bags when her arm shifted downward, causing her to lose balance and fall to the floor. She suffered a left hip fracture.",1
"An employee was using a compound miter saw to cut wood for packaging when the blade cut the back of the employee's right hand, requiring hospitalization. The saw was guarded at the time of the incident.",1
"An employee was trying to hang a portable crosswalk on hangers when the employee's left hand was pinched between the portable crosswalk and a barrier rail, resulting in an amputation of the ring finger and a fracture to the forefinger. No tools were used at the time of the incident.",0
"An employee was operating a glass forming machine when the funnel closed on his left arm. The molten glass burned his left hand and forearm, and the machine caused contusions to his forearm and hand.",1
An employee was attempting to unjam a pelletizer pull roller when the machine's fly knife blade drum amputated his right ring finger. The machine was unguarded and running at the time of the incident.,0
"On January 10, 2019, an employee was helping in the operation of a sheet metal slitting machine and was operating a sheet metal re-coiling machine. He was trying to tighten up the sheet metal coil before banding it. As the coil turned, his right pinky finger was caught in a pinch point between the coil and the tensioning bar of the re-coiler. The finger was cut about halfway through and was later surgically amputated just below the first knuckle.",0
An employee slipped on snow while walking into work and required hospitalization for a broken ankle.,1
"An temporary employee 's foot was run over by a forklift, fracturing it and requiring surgery and hospitalization.",1
An employee was on a 6-foot ladder installing sheet rock. The employee fell 3 feet to a lower level and broke an ankle.,1
"An employee had been operating an embossing press. The employee noticed a piece of splicing tape was not adhering correctly. When he attempted to fix the tape, his right hand became caught in the embossing rollers. Four fingers on the right hand were degloved and the employee was hospitalized.",1
"An employee was adding enchilada mix into a mixer when her hand was caught between the paddles and the mixer, resulting in ligament and nerve damage to her left arm and possible broken bones. She was hospitalized.",1
An employee was processing scrap aluminum with an alligator shear and amputated multiple fingers.,0
An employee was unhooking the rig floor from the derrick when the rig floor struck the employee. The employee was hospitalized with leg and rib fractures.,1
"An employee was washing his cement truck when his right foot slipped, causing his ankle to roll and resulting in a fractured right fibula and tibia above the ankle.",1
A temporary employee was sweeping the production floor when a nearby tube cutting machine missed a cut causing a glass tube to miss the landing equipment and strike the employee's left calf. The employee was hospitalized with a puncture wound to the left calf muscle.,1
An employee was helping to moor a coal barge when a rope pinned his foot between it and the barge amputating his left big toe.,0
"A truck driver jumped from the cab of the truck, at seat height, to the ground to avoid a fire and sustained a broken tibia and fibula.",1
"An employee was on an extension ladder installing a window reveal trim inside the second level of a house being constructed when the ladder slipped on the floor, causing the employee to fall approximately 12 feet. The employee suffered a broken wrist, concussion, and sprained ankle.",1
An employee was loading the truck and sustained a left ring finger amputation after being struck by a rolling lighting case.,1
"An employee was found unconscious and unresponsive, lying at the foot of the third floor stairs. It is believed that he fell. He was hospitalized with a head injury.",1
"An employee fell from a fixed ladder accessing the roof and sustained broken ribs, lacerations, and contusions.",1
An employee put a repaired motor back on a stamping press and was turning the belts to make sure they were all lined up in the groove. His hand became caught between the motor pulley and belt. He sustained a crushing injury with an open distal phalanx fracture and a nail and nailbed injury to the left index fingertip.,1
"An employee was operating the garbage truck's lift handle to pull a garbage can up to the truck to dump the garbage. On the way down, his left index finger became caught in the safety latch of the lift. The employee sustained the amputation of the left index fingertip.",0
"On 1/10/2019, an employee fell from a portable staircase while picking orders and suffered bleeding on the brain, requiring hospitalization.",1
"An employee was looping coil on a machine when one of the wires came out of alignment and he moved it back in place. His hand was in the path of the loop when the machine was activated via the foot pedal, causing the loop bar to turn and amputate his right middle fingertip.",0
An employee fell from about 24 feet to the ground below and sustained slipped spinal disk injuries.,1
An employee was performing a cleaning task at the start of a product change-over on the production line. The machine includes a free-floating pan and scraper drum. The employee's left arm became trapped between the pan and drum causing a laceration and fracture.,1
"An employee finished football practice and was on the team bus when he experienced abdominal cramps due to dehydration, requiring hospitalization.",1
"An employee was cleaning up the shop area with a co-worker. There was a plunger on an I-beam. The employee picked up the plunger, then dropped it. The employee tried to catch it, and his right hand was caught between the plunger and a metal pipe stand. The employee sustained a laceration, torn tendon, and fracture to the middle finger.",1
An employee was operating a chamfer machine that bevels metal bars when the machine jammed. The employee was attempting to remove the jam by pushing on the bars when the machine engaged and amputated the employee's fingertip.,0
"An employee poured chlorine (thinking it was water) inside a pump sprayer that had an acidic cleaner inside, creating a noxious fume that caused the sprayer to explode. The chemical mixture spilled onto the employee's left leg and foot, causing chemical burns.",1
An employee sustained the amputation of three fingers while operating a mechanical press brake.,1
An employee fell down about eight steps while coming downstairs from the second floor and was hospitalized with bilateral arm fractures and a possible head injury.,1
"An employee was mopping when his head struck a metal merchandise rack, resulting in a concussion.",1
"An employee was cleaning a pipe when a 14,000 psi hydro-blasting hose exited the pipe and struck his left buttocks area, causing a high-pressure puncture wound.",1
An employee suffered a blister to his left toe from rubbing on his safety boot. The blister became infected and required hospitalization.,1
"An employee was exiting a scissor lift when he slipped on the step and fell, suffering a broken wrist and hip.",1
An employee fell through a cover over a staircase opening to the basement level and was hospitalized with a neck injury.,1
"An employee was helping a backhoe operator place a concrete inlet box. The employee was holding the wire rope cable with his left hand when the backhoe lifted the box. The cable cut the employee's hand, resulting in a finger amputation.",0
An employee was in the back store room moving small boxes when she stepped on a pallet tie which caused her to trip and fall striking the concrete floor. The employee sustained a broken left elbow.,1
"As an employee stepped out of a car in the parking lot, the car began moving in reverse and ran over his leg. The employee was hospitalized with a broken leg.",1
"On 1/11/2019, an employee opened a barn door to release animals when a gazelle cornered her and punctured her leg with its antlers. She was hospitalized.",1
"While exiting a guard shack, an employee missed the first of two steps and fell to the concrete ground, fracturing the left knee and right ankle and lacerating the left middle finger.",1
An employee was positioning a 2x4 wood beam on a table saw when the saw blade deeply cut the employee's right hand.,1
"An employee was cleaning windows from a step ladder. Upon descending from the step ladder, the employee fell and injured the left knee.",1
An employee was troubleshooting a roller that was not rolling on the rolling mill. He stepped to the side and tried to manually roll it when the roller began to roll and his fingers were pinched between the roller and the pipe going through the mill. He suffered partial amputations to his right middle and ring fingers.,0
"An employee un-bolted two rotary mowing machines and was lowering them when they fell onto his foot, causing injury.",1
"A maintenance employee was attempting to remove a jam when the employee's left middle fingertip was caught between a sprocket and chain, resulting in a fingertip amputation.",1
An employee was using a corrugated air gun to repair a pallet when the corrugated fastener cut his left hand and struck an artery. He was hospitalized and required hospitalization.,1
"While an employee was cleaning fiber and metal shavings from a separating machine, the machine energized and the rotating auger struck the employee's right hand causing the amputation of the right thumb.",0
"While unjamming the mandrill unit, an employee sustained a wrist laceration requiring hospitalization.",1
"An employee was inspecting roofing work when the employee slipped and fell 10 to 13 feet from the roof to the ground, fracturing the right heel.",1
An employee was cutting a 4-inch piece of foam in half using a band saw when his left thumb contacted the blade and was partially amputated.,0
"An employee was using an 8-foot A-frame ladder to pull stock from the shelves in the back room. The employee fell from the ladder from an unknown height and hit the floor, lacerating her hand and injuring her back. She was hospitalized.",1
"An employee was getting material from inside a bucket truck bin (compartment) to provide to a lineman working aloft. When the employee released the locking mechanism for the bin door, the door swung open and lacerated the employee's face.",1
"An employee was positioning metal grates on the back of a trailer when his left middle finger was caught on the metal grate, resulting in a finger amputation.",1
"An employee was changing blades on a forklift when a blade fell and pinched his left middle finger between the blade and the ground, resulting in a partial amputation.",1
"While operating a forklift, an employee reached for an object and lost control of the vehicle, which collided with another parked forklift. The employee was pinned between the two forklifts, suffering a crushing injury to the upper chest area.",1
"At approximately 2:12 PM, an employee was operating a wax machine when his left sleeve became caught in the gears of the machine, pulling his arm into the gears. He was hospitalized with a fractured left arm.",1
An employee was leaving a patient's house and getting in her car when she was struck by a passing motorist. She suffered a head injury.,1
"An employee exited the vacuum truck he was driving to close a pen gate at the end of a barn. After closing the gate, he started to walk back to the vacuum truck when he slipped on the snow-covered ground, fracturing his right ankle and damaging the ligament and cartilage.",1
An employee was loading a tanker truck with hot asphalt oil. The hose came loose and splashed the employee with hot asphalt oil causing third degree burns to the arms and legs. The employee was hospitalized.,1
"An employee had just finished delivering a parcel, turned and slipped, and fell down a flight of stairs hitting their head. The employee was hospitalized for a fractured neck bone.",1
"An employee was walking in the trailer yard when the employee slipped on ice and fell to the ground, fracturing the lower leg and requiring hospitalization.",1
An employee was cutting meat with a bone saw and lacerated the tip of his left middle finger resulting in a partial amputation.,0
"An employee was walking in packed snow when the employee slipped and fell to the ground, suffering a fractured right femur.",1
"An employee was adjusting an overhead conveyor belt (8 feet in the air) on a scissor lift when her finger became pinched in an in-running nip point, resulting in a fingertip avulsion. The conveyor belt was running at the time.",1
An employee experienced carbon monoxide poisoning while chaperoning a field trip to see monster trucks.,1
"On January 12, 2019, at approximately 11:10 AM, an employee was walking to the cafeteria when he slipped and fell breaking his femur.",1
An employee was using an airline to blow condenser tubes out. An obstruction was dislodged from a tube and struck the employee in the hand and chin.,1
"An employee's ski tips crossed, causing him to fall to the snow and injure his knee.",1
"An employee was demonstrating an electric bicycle on the sales floor for a customer when the employee fell to the ground, fracturing the left leg and required hospitalization.",1
"An employee was closing the door to the bathroom when the door slammed quickly and caught the tip of the employee's left pinky finger, resulting in a pinky fingertip amputation.",0
"An employee was performing maintenance activities on hospital grounds when the employee slipped on ice and fell to the ground, suffering a hip fracture.",1
The injured employee was spotting for another employee who was backing a conveyor out of a warehouse using a forklift. The injured employee noticed that the forklift was about to hit the overhead door to the warehouse with the conveyor. The injured employee went to lower the conveyor to prevent damage to the overhead door and the conveyor and the forklift struck the employee breaking both legs below the knee.,1
An employee was struck on the lower left leg by two joints of pipe.,1
"An employee was splashed in the face with caustic soda, resulting in some of the material getting in his eye. The employee was hospitalized.",1
"While taking trash outside to a dumpster, an employee tripped and fell resulting in hospitalization for a right shoulder injury.",1
"An employee had climbed a ladder to snap a light cover into place. The light cover swung back and knocked the employee off the ladder, causing injury to the head and back.",1
A metal brick was ejected out of a grinder and caused injury to an employee's left arm and chest.,1
"Two employees were on break sitting in a parked car. One employee accidentally discharged a gun, hitting the other employee's hand and leg. He was hospitalized and had surgery.",1
"An employee was offloading frozen product from a vessel's main freezer onto a conveyor belt system leading to a shoreside warehouse when a box weighing approximately 40 lbs. struck/crushed the employee's left thumb, resulting in a partial amputation.",1
An employee was in the process of putting a tray in the oven when she slipped and fell on her left leg resulting in a broken tibia.,1
An employee was chopping basil with a knife and amputated his left middle fingertip.,1
"On 01/14/19, an employee was working on an injection molding machine and packing plastic parts when a piece of plastic fell to the floor. She bent down to pick it up and her scarf became caught in a grinding machine bearing, resulting in her being choked and suffering lacerations. She was hospitalized.",1
"An employee ascended a flight of seven metal stairs to check supplies. He was going back downstairs with  and was making a turn on the landing when his boot became caught in the galvanized serrated metal grating, causing him to slip and fall to the metal steps, injuring his neck and back. He was hospitalized.",1
An employee suffered a laceration to their pinky finger while operating a lock former.,1
"An employee was unloading couches from a truck. He had three couches boxed up on an industrial-sized hand dolly when the load hit the top of the truck. The couches fell on him with the dolly in between, causing a severe left leg laceration.",1
"An employee was operating a roller press cutting felt paper when the employee's left hand slipped and was caught between the upper roller and the cutting die, resulting in an amputation at the left wrist.",0
"An employee slipped and fell on an icy cement sidewalk outside of a patient's home, suffering a fractured wrist and femur.",1
"An employee was inspecting the parking lot conditions and internal roadways of the facility when he stepped on ice and fell, breaking the right side of his hip.",1
An employee was removing dust from the hooking clasp (called a dog) on a kiln car on a tram and amputated his right index finger.,0
"An employee hitched a ride in the back of another employee's pickup and was thrown from the back of the truck to the ground, suffering head trauma.",1
"Employees were loading 6.5-inch drill collars onto a 40-foot flatbed trailer for transport. The injured employee was attempting to install a band around a collar to secure it when the drill collar rolled off the trailer and struck the employee's right foot. As a result, five of the employee's toes were amputated.",0
"An employee was helping a maintenance man adjust the belt on a stainless steel deburring machine when the employee's left hand was caught between the belt and drum, removing skin from the palm. The machine was running at the time of the incident.",1
"An employee was attempting to push chunks of ice/sawdust/bark into the bucket of a skid steer. In an attempt to gain leverage, the employee grabbed the bucket of the skid steer. At the same time, the equipment operator tilted the bucket. The employee's fingers were then caught between the bucket and a metal support beam, resulting in the amputation of four right-hand fingers at about the second knuckle.",0
"An employee was walking at the worksite when the employee tripped on a 4X4 piece of wood and fell to the ground, fracturing the left elbow.",1
An employee lost balance and fell from the third rung from the top of an 8-foot portal ladder while positioning air ducts in a drop ceiling. The employee contacted the concrete floor and suffered a head injury.,1
An employee was taking out trash behind the outpost and slipped on some ice and fell resulting in injuries to his right hip and pelvis.,1
An employee was using a tire machine and attempted to see if the tire was coming off the rim.  The spinning tire then amputated the employee's fingertip.,1
"An employee's left hand was caught between a chain and sprocket, resulting in a pinky finger amputation.",1
"On January 14, 2019, at 4:30 PM, an employee was standing on the back of a dump truck at a residential construction site when he slipped and fell onto a dirt surface, landing on and fracturing his left wrist. He was hospitalized.",1
"An employee was unloading unit load device containers from an aircraft. He was pulling a pallet when his foot became stuck. The pallet then rolled over his left foot, causing pain, swelling, and bleeding to his toes. He was hospitalized.",1
"An employee was manually clearing a clog in a centrifuge machine when his fingers were caught and crushed between the dryer mechanism and the centrifuge, ripping the skin and meat off and leaving the bone. As a result, his right middle and ring fingers had to be surgically amputated.",0
An employee was bringing in equipment to complete a case. The employee tripped over a cord attached to a piece of equipment and fell to the floor. The employee sustained a fractured right arm requiring surgery.,1
"An employee was leaving a bathroom when the employee's left hand was caught in the hinge side of the restroom door, resulting in a left pinky fingertip amputation.",0
"An employee was using a powered handheld saw to cut 2 x 4's, when his right leg was lacerated above the knee. The employee required hospitalization and surgery.",1
"An employee was attempting to push a waste bin when the waste bin became stuck on a hanger wire. As the employee attempted to get the waste bin unstuck, the employee fell on concrete and injured the right hip.",1
"An employee was unloading a semi-truck into a route truck when the employee's feet became tangled in plastic wrap. The employee tripped and fell off the truck to the ground, suffering a concussion.",1
"An employee slipped and fell to the ground inside a parking garage, hitting his head and requiring hospitalization.",1
"An employee was moving a pallet loaded with empty milk crates when the crates started to fall. The employee tripped and fell to the floor while attempting to move out of the way of the crates, suffering a hip fracture.",1
"An employee was conducting hourly lot trailer exterior security rounds when the employee lost balance and slipped, falling on black ice on the cement ground and fracturing the right leg in two places (below and above the knee). The employee was hospitalized.",1
An employee amputated his thumb while cutting lettuce.,0
"An employee was driving an electric stand-up pallet jack when another pallet jack driver struck him. This caused him to lose control of the pallet jack and to hit a metal railing. His left ankle hit the metal railing, resulting in a laceration and fracture to his left ankle. He was hospitalized.",1
"While clearing snow, an employee slipped on snow/ice and fell, breaking four ribs. The employee was hospitalized.",1
"An employee was relocating a rack of glass using a manual pallet jack when the glass fell on his foot, fracturing four toes. He was hospitalized.",1
"On January 14, 2019, at 8:10 p.m., an employee was scanning mail on a roller table and stepped to the right. The employee's right foot was caught on the edge of a mat and the employee fell to the floor, fracturing the right hip.",1
"An employee had chest pains after shoveling snow, requiring hospitalization.",1
An employee was acting as a spotter and guiding a flatbed operator while standing on the rear passenger side of an outrigger leg when he stepped back onto a mobile crane platform and fell approximately 70 inches to the ground. He was hospitalized with an open fracture to the left ankle.,1
"An employee fell off a ladder from a height of less than 10 feet, resulting in fractures, dislocated bones, and torn ligaments of the wrist.",1
An employee suffered partial amputation of the right index finger during engine maintenance.,1
An employee slipped on ice and fell resulting in a hip fracture.,1
"An employee was attempting to remove a scroll compressor and was pulling on the suction line while his helper was heating the solder joint enough to allow him to pull the joint apart. His helper was in the process of removing the flame when hot refrigerant oil sprayed onto the employee's face, forearm, and neck, causing burns.",1
"An employee fell off a scaffold to the floor, injuring his back, neck, and elbow.",1
"An employee tripped and fell over a wheelchair foot rest, suffering the loss of an eye.",1
"An employee finished drilling a hole into a hinge and was wiggling the hinge out of the drill when his hand raised up and the rotating drill caught his glove, pulling his hand into the drill. He suffered a crushed finger and several fractures to the left index and pinky fingers, leading to amputations.",1
"An employee slipped on ice and hit his leg on the underside of a trailer, fracturing both bones in his leg and requiring hospitalization.",1
"An employee was attaching a cable to a D-ring when the cable tightened, catching and fracturing his right hand between the cable and D-ring.",1
An employee slipped on ice in the parking lot and fell injuring her knee.,1
An employee slipped on ice and fell resulting in a fractured rib and a bruised lung.,1
"An employee was checking concrete grades when a skid steer backed onto the employee's leg, causing multiple fractures.",1
"An employee had been doing an infra-red scan of an uncovered electrical switchgear panel (600 volts, 4,000 amp). As the employee replaced the cover on the panel, an arc flash fire occurred, causing second degree burns to the employee's legs, wrist, and neck.",1
"An employee was walking in the parking lot when he fell, breaking his arm and wrist.",1
An employee was cutting beef shank on the meat saw. After getting toward the end of the shank the saw blade became caught in the bone and jerked the beef shank. This caused the employee's right index finger to be pulled into the saw blade resulting in the amputation of about two-thirds of the finger.,0
"An employee was working from an aerial lift to measure a sign when the employee contacted power lines and was shocked, requiring hospitalization.",1
An employee was in a hole helping to install two sections of a gas pipe at a bend when the pipe slipped through the clamps used to hold it and crushed the employee's right leg. The employee was hospitalized and required surgery.,1
"An employee was walking to her vehicle after her shift when she slipped on the ice and fell to the road, breaking her hip. She was hospitalized.",1
"An employee was loading a metal pipe on a flatbed semi-trailer when the employee fell off the side of the flatbed semi-trailer. After the employee fell off the trailer, the pipe shifted position, rolled off the trailer, and landed on the employee's left leg. The employee was hospitalized with a fractured lower left leg.",1
An employee thought they observed a loose screw towards the rear of a machine and reached in to check the screw. The machine completed its cycle and crushed the employee's left hand. The left middle finger at the knuckle and a portion of the pinky finger were surgically amputated.,1
"While clearing a jam in the head rig chipper an employee had to remove the chipper's lid. When lifting the lid, it was found that a pin which allows the lid to pivot, was not in place. This caused the bottom of the lid to rotate and roll over the bump stop. The lid then rolled over towards the employee, striking the employee in the left arm and the front of his hard hat. The employee sustained a broken left humerus.",1
An employee's right hand was caught between a conveyor and a chain guard. The employee sustained amputations to the right ring and index fingertips and the middle finger to the first knuckle.,1
"An employee was in a guard shack helping a second employee unload tickets and codes when suddenly the shack caught on fire. The employees exited the shack to help a truck driver and to put the fire out. At that time, the first employee received burns.",1
"An employee was adjusting a belt on a pulley. The belt and pulley caught the employee's right hand, causing the amputation of the little finger.",0
An overhead rigging chain with a splice box broke. An employee was struck in head by the chain sling resulting in a contusion and skull fracture.,1
An employee was cleaning the chains in the bed of the module truck. His clothing became caught in the chain and sprocket causing a separation to his right arm's pectoral muscle.,1
"An employee was unloading a bulk trailer. He pressurized the trailer and heard a hissing sound.  He climbed up on top of the trailer to investigate what was leaking. He discovered the cleanout hatch was hissing.  At that time, he touched the cap and it flew off, striking him in the forehead. He was hospitalized with a forehead laceration and required stitches.",1
"Part of the safety cable that ran vertically along the post that was covered by previously poured concrete had been chipped away. As the employee squatted and held onto the safety cable to look at the outer side of the post, the safety cable gave way, causing the employee to lose his balance and fall forward 14 feet over the edge of the second level of the parking garage. The employee was hospitalized with 2 broken heels.",1
An employee was stepping onto a step when he fell and broke his right ankle.,1
"A temporary employee was pulling freight and scanning product when his arm went through a forklift mast to scan a carton. The mast closed on his arm, breaking it.",1
"An employee was redressing a compact setting tool and had it in a vise. He put the mandrel in the sleeve and attempted to screw the mandrel onto the tool. When he let go of the mandrel with his right hand, it fell. As he attempted to catch the mandrel and sleeve, he stumbled and the mandrel struck/pinched his finger on the floor, resulting in a left middle fingertip amputation.",0
"An employee was working from a foot hop. The plank fell off its support when the support moved under it, causing the employee to fall. The employee suffered internal bleeding and contusions.",1
An employee was looking for a crescent wrench and dropped his flashlight. He reached for the falling flashlight and his hand contacted the fan blade of a running generator engine. The employee sustained an amputation to the right index fingertip and a laceration between the thumb and index finger on the right hand.,0
"An employee tripped and fell to the asphalt pavement while exiting his truck for a delivery, fracturing his left hip and requiring hospitalization.",1
"An employee was using a loader to place a 4.5-inch casing onto a pipe rack. The employee noticed the casing was rolling off of the pipe rack and exited the loader to stop it. The casing rolled onto the employee's left arm, pinning and breaking it.",1
"Two employees were using Dexpan when the chemical sprayed into their eyes, causing eye injuries to both. One employee was hospitalized.",1
"An employee was unloading rolling bins from the rear of a semi trailer. A forklift ran over the employee's feet, causing the employee to fall. The employee suffered severe bruising of the left foot and right toes, as well as a hip injury, and was hospitalized.",1
"On January 15, 2019, at approximately 4:53 p.m., an employee delivered a package, turned to descend the stairs, tripped over raised carpet, and fell down 8 stairs to the ground, suffering a lower left leg fracture.",1
An employee was adjusting the position of a paper roll. His hand slipped on the roll causing him to lose balance and fall. The employee fractured his femur.,1
Employee was attempting to remove a jammed box on a conveyor system when his apron was caught in the conveyor roller and pulled him down. The employee caught himself with his hands  and then his left  pinky finger went into the roller. He pulled his finger free and then his right pinky finger went into the roller. The roller partially amputated his right pinky fingertip and his left finger was fractured.,1
"An employee was standing beside a conveyor gate when another employee closed the gate latch on the first employee's left index finger, resulting in a fingertip amputation.",0
"An employee was walking when he fell near the chip chain by the bind. His right hand was caught in the belt at the drive of the chip chain bend, resulting in a pinky finger amputation.",0
An employee sustained a right-hand laceration and fracture to the fourth finger while operating a vertical turret lathe.,1
"A contractor employee was taking a press machine apart when another employee bumped into him, causing him to fall into the pit where the press is housed. He struck his back along the wall of the pit as he was falling to the ground.",1
A garbage truck ran over an employee’s left foot crushing it.,1
"An employee was operating a press brake machine to form 16-gauge cold rolled sheet metal into an 18"" x 12"" metal pan with a 1-inch lip on all four sides. The bottom foot of the press brake fell out of the machine and landed on the employee's left leg/foot, crushing the foot and lacerating the calf and shin.",1
"On January 15, 2019, at 8:45 a.m., an employee was walking into work from where she parked on the street when she slipped and fell, striking her head on the icy sidewalk. She was hospitalized with a fractured occipital bone.",1
"An employee was prepping a vehicle to be dismantled by removing parts when gas splashed near the heater, causing it to ignite. The employee was burned on the face and hands.",1
"On January 15, 2019, an employee was trying to unjam a machine when his finger was caught between a belt and pulley assembly, amputating his right index fingertip.",0
"While installing utility meters, an employee contacted overhead power lines and sustained burns to their hand and face.",1
"An employee slipped and fell on the floor while moving a cooler, tearing the left thigh muscle tendon from the knee.",1
An employee slipped and fell on ice in the parking lot and broke their left femur.,1
"An employee was aligning a casting body that was not centered. The employee was using shims and the tailstock to align the casting body. While holding some pieces of shim material on the center, the employee activated the foot pedal to move the tailstock forward to hold the casting body. The foot pedal malfunctioned and did not move the tailstock forward. When the employee looked at the foot pedal, the tailstock engaged, moved forward, and the employee's fingers were caught between the casting body and the tailstock. The right index and middle fingers were amputated halfway through the fingernails.",0
"An employee slipped and fell from the roof of a two-story house to the ground while on his way to secure his harness to the rope, suffering a right ankle fracture.",1
"An employee was loading plants from a metal trailer on the top shelf of a rack when he stepped on the metal trailer and slipped, catching his right middle finger in the side post of the metal rack. His finger was fractured.",1
"An employee turned around after stacking boxes. The boxes had fallen over, and the employee then tripped over the boxes and fell to the floor, fracturing the right hip.",1
"An employee slipped and fell, breaking a leg.",1
"An employee was removing paper stuck in a vacuum roller when the employee's left thumb was caught in a pinch point, resulting in an amputation at the mid-nail area (no bone loss).",0
"An employee was trying to push a bar that had jammed the chain and the sprockets of a plate freezer machine when his left first finger was caught between the chain and sprockets, resulting in an amputation of his finger.",1
"An employee was attempting to wipe dust off of a machine when his finger entered the exhaust chamber and contacted a blower, resulting in a left middle finger amputation.",0
"An employee was carrying luggage and descending the stairs from a plane when the employee reached ground level and slipped on black ice. She injured her leg, requiring hospitalization.",1
"An employee was sawing a board when the saw kicked the board back. The saw blade contacted the employee's left hand, lacerating it and amputating the ring finger.",0
An employee set a ladder on a second landing's snow and ice rubberized surface. The employee was climbing the ladder when he fell with the ladder from 15 feet onto a concrete slab. He sustained a broken right wrist and four broken ribs.,1
"An employee tripped over a door stop while pulling wires, suffering severe abdominal pain likely due to a severe hernia.",1
"An employee was unstrapping 20 sheets of glass in a truck. After being freed, they fell on him. The employee suffered a torn ACL.",1
"An employee was performing maintenance on a Powerite box and was splashed with a mixture of hot and cold water, receiving second degree burns.",1
"An employee was installing a cap on a gas fireplace vent on the exterior of a house. He fell 6-7 feet off a step ladder onto the ground. The employee sustained a broken rib, punctured lung, and a fractured wrist.",1
An employee was attempting to fix a hydraulic leak in the stacker/grader when the electric eye was activated. The employee's arm was then fractured and an artery was lacerated in the stacker/grader. The stacker/grader was not locked or tagged out at the time of the incident.,1
An employee was working to unjam a reject bin when her glove was caught in a conveyor belt sprocket. The force fractured the employee's right ulna and radius.,1
"An employee was hammering a wooden stake into the ground with a sledge hammer when the hammer hit his right hand, injuring his index finger.",1
An employee was burned on both hands while testing electrical equipment using a pin and sleeve insertion withdraw method.,1
"On January 16, 2019, at approximately 1:30 p.m., an employee was cleaning a storm drain when the J-hook attachment used to pick up and move the storm drain became disengaged from the grate and the 300-pound iron storm grate dropped on his left foot. He was hospitalized with fractures to his three smallest toes and required surgery.",1
An employee was repairing a hole on a steam and condensate blowdown line in the power house when the steam caused second degree burns to 50 percent of the employee's body.,1
"An employee opened the top of the copier, which contacted a fire extinguisher on the wall. The fire extinguisher fell onto the employee's left foot. The employee sustained a partial amputation of the middle toe.",0
"An employee was using a forklift to unload trailers. His hand was under the protected forklift cage as he leaned onto the controls that lowered the boom. His left hand was then caught between the boom and the mast, causing a laceration and three broken bones in his hand. He was hospitalized.",1
"On January 16, 2019, at approximately 3:35 p.m., a machine operator was working to run normal production on the ravioli forming machine. The employee was tasked with continuously supplying (feeding) the filling into the machine and to start/stop the machine to make small production adjustments to the product. At some point during production, the injured employee contacted moving components inside the machine and sustained an amputation, without bone loss, to the middle fingertip of the left hand.",0
"An employee was standing on an A-frame ladder about 12 to 15 feet above the ground while attempting to light a waste oil heater that hangs from the ceiling. The employee pushed the reset button (electric ignition) and a flame came out of the heater, causing second degree burns to the employee's face.",1
"An employee was using a tabletop date code stamper to record information on cardboard packaging when his finger was caught between the stamper head and base of the stamper, resulting in a finger amputation. The plexiglass face had been removed from the stamp at the time of the incident.",1
"After removing an air hose and a 1/2-inch nipple from a line that was being tested, a plug in the line hit and injured both of the employee's hands.",1
"On January 16, 2019, at approximately 4:00 PM, an employee was installing insulation to a steel exhaust vent in the storage garage as a temporary solution to reduce escaping heat. The employee was working from an aerial lift and was found unconscious and face down on the gravel surface below the lift. The lift was positioned in an elevated position with the basket door open. It is presumed that the employee fell from the lift. The employee was hospitalized for head trauma. Fall protection was not worn at the time.",1
"On January 16, 2019, at approximately 4:52 a.m., an employee fell in the parking lot upon arrival to work, fracturing her left femur/hip and requiring hospitalization and surgery.",1
Two employees who worked for different employers got into an argument and began to shove each other. The injured employee fell backwards and fractured his hip.,1
An employee fell in the parking lot.,1
"An employee fell while mopping floors. A fire extinguisher was knocked off the wall and landed on his right index finger, causing an amputation up to the first knuckle.",0
"An employee was attempting to clear a jam at an LED attachment machine when the employee's right fourth finger was pinched between the LED tube feed magazine and the horizontal stationary guide, resulting in an amputation to the distal end of the finger (no bone loss).",0
An employee was bent down picking up trash from the ground in the parking lot when a snow plow reversed into the employee and struck the employee's torso. The employee was hospitalized with broken ribs.,1
An employee was adjusting a nail machine when their hand was caught in a belt and pinched in the pulley. The employee sustained the amputation of the right index fingertip.,0
"An employee was using a reciprocating saw when his right pinky finger contacted the blade, resulting in a fingertip amputation.",0
An employee removed a piece of decking for a welding inspector to see under it when he inadvertently fell through the opening about 16 to 18 feet to the ground below. He was hospitalized with a collapsed lung and fractured ribs.,1
"On January 16, 2019, an employee was exiting her car to enter work when she slipped on ice and fell. She suffered a broken left tibia and was hospitalized.",1
"An employee was walking to a vehicle in the parking lot when he slipped on black ice, dislocating and fracturing his right ankle.",1
"An employee was walking down steps when she fell, breaking her left ankle.",1
"An employee was rinsing cheese conveyor belts when he saw a piece of cheese on a weigh belt and attempted to remove it. His arm was then caught in the weigh belt, resulting in a broken forearm. The weigh belt was guarded at the time of the incident.",1
An employee was operating a crane and experienced respiratory distress caused by exposure to toluene vapors. The employee was hospitalized.,1
"On January 16, 2019, while moving from a front end loader to a semi trailer to strap down a load, an employee slipped and fell about 4 feet to the ground below. He suffered broken ribs and was hospitalized.",1
"An employee was removing straps from the top of a load of lumber in a truck trailer when the employee slipped on snow/ice and fell to the ground, breaking the left foot.",1
"An employee was taking a photo of a product shelved in an upper part of the warehouse. As she was climbing a warehouse extension ladder, it slid downwards. She jumped from the ladder and hit the floor, breaking both legs.",1
An employee had been assigned to perform a heater inspection. The employee planned to use a ladder to access the roof. The employee was found on the floor of the facility with a concussion.,1
"An employee was drilling holes in steel beams when his right hand and glove became entangled in the magnetic drill. The employee was hospitalized due to lacerations, possible ligament damage, and a nail avulsion on his right hand.",1
"An employee dropped a container which contained acetic acid, adam, and MEHQ. The container hit the edge of a fume hood and splashed onto the employee causing second degree burns.",1
"On January 16, 2019, an employee was bending sheet metal on a hydraulic press brake. The height adjustment guard had loosened and created a larger clearance between the sheet metal and the die. The press brake was activated via the foot pedal while the employee's fingers were in the point of operation. His left index finger was crushed, resulting in a partial amputation.",0
"An employee was struck by a rotation bar during a change-over on a thermoformer machine, injuring his spleen, colon, and pancreas. He was hospitalized.",1
"An employee climbed up a portable stair ladder to grab a box from the shelf. On the way down, he missed a step of the ladder and slipped, falling and hitting the back of his head on the concrete floor. He suffered a head laceration and fracture.",1
"A leg from a concrete paver had been removed at the job site and transported to the yard by a material loader. A mechanic truck was used to lift the leg off the loader and place it on the ground. Once on the ground, the leg shifted and the employee was pinned between the leg and a low-boy trailer in the chest and right shoulder area. The employee sustained three broken vertebrae.",1
"An employee was reducing pressure on an over-the-road tank truck for unloading purposes. Due to an over-pressurization event and/or a defect, a 3-inch stainless steel washout pipe nipple cap failed and struck the employee in the face. The employee was hospitalized with head injuries.",1
"An employee was cutting metal from an elevated position of approximately 10 feet. He was tied off to the structure he was cutting. When he cut the structure, it came loose, and both he and the structure fell to the ground. He suffered a broken left leg above the knee, a bump on the back of the left ear, and scratches above the right eye.",1
"An employee had been disassembling a scaffold, working on the fourth tier. Components being stacked on exterior outriggers caused a shift in weight, which led to the collapse of the scaffold's top section. The employee fell 25 feet and sustained a fractured and lacerated right arm.",1
"On January 17, 2019, an employee was cleaning a fryer machine and sustained a partial amputation to the right thumb after it became caught in a chain and sprocket. The machine was not locked out at the time.",0
"On January 17, 2018, at approximately 3:00 p.m., an employee was picking up ventilation duct work on the outside retaining wall of an outdoor grain pile. A second employee was operating farm equipment inside the grain retaining wall to move corn seed. As the second employee was moving seed, a piece of ice on the tarp covering the pile was dislodged and slid down the tarp, striking the retaining wall and sending pieces into the air. One of the pieces of ice struck the first employee on the right side between the rib cage and hip. The employee was hospitalized due to internal muscle bleeding.",1
"An employee was working on the product fill line when the product injection needle injected into the employee's hand, wrist, and arm, requiring hospitalization. The injection needle was guarded at the time.",1
An employee was climbing a ladder when the ladder slid and the employee fell to the ground sustaining back and leg contusions.,1
An employee was assisting others in rotating a canopy on a piece of heavy machinery which was to be placed where welders were working when his finger was caught between two pad eye stops. The employee sustained the amputation of the distal fourth finger on the left hand.,0
An employee was moving steel flat bars from the forks of a forklift by hand when the material shifted and caught the employee's right middle finger. The fingertip was amputated.,0
"An employee was walking next to a forklift being operated by another employee. When the employee stopped walking, the forklift struck and injured the employee's foot.",1
"On 1/17/2019, an employee was walking through the production area when he was struck by a powered industrial vehicle while crossing an intersection. The employee was hospitalized with a broken foot and amputated toe(s).",1
An employee was running the punch machine when the punch came down and blew apart. Shrapnel scattered and struck his left arm.,1
"An employee was putting bricks on an elevator when he fell from a scaffold, landing about 20-30 feet below. Blocks fell on top of him. He was hospitalized with a broken arm and broken back.",1
"On January 17, 2019, an employee was setting up a cut-off grinding machine to smooth two castings. When the cutting/grinding was initiated, the abrasive wheel disintegrated and shot out at the employee. The employee sustained a thumb amputation and other injuries to the hand and chest.",1
"On January 17, 2019, an employee was dumping scrap by hand when a scrap hopper tipped over, causing scrap to spill out onto the employee's feet. The employee's feet were pinned against a conveyor, fracturing both ankles.",1
"An employee was cutting laminate with a table saw when the blade cut his index, middle, and ring fingers on his left hand. His ring finger was completely amputated.",1
"An employee was sending a part through a pass-through parts washer. He was attempting to guide the part when his glove and finger were caught in the conveyor, pinching his fingertip at the transition from the washer to the roller conveyor. As a result, his right ring fingertip was amputated.",0
An employee was on an ATV retrieving material from an outdoor storage area when the employee hit an ice patch on gravel and the ATV flipped. The employee suffered pelvic fractures.,1
"An employee was loading bags of powdered mixture into a sifter. While he was trying to retrieve a fallen box cutter from the hopper, the rotating blade in the hopper severely cut fingers on his right hand.",1
"An employee was moving an under-trailer storage box when he tripped on a trailer. He fell backwards and the storage box fell onto him, landing on his left hand. It smashed his left index finger, causing an amputation.",0
An employee was struck by an outrigger while delivering spa equipment to a residence. The employee suffered a compound fracture to a finger on the right hand.,1
"An employee was pouring a small quantity of heptane into a 1' x 1' pan to conduct a fire test in the laboratory. When the heptane was poured into the pan, it flashed and burned the employee's right hand and left thumb.",1
"An employee's feet became tangled in stretch wrap on the floor of a freezer, causing him to fall fracture his right hip.",1
"An employee's foot became caught and injured on a chair leg in the kitchen area of the office, requiring surgery.",1
"An employee was coming out of a cooler into a passageway in a packing house. A forklift struck her, rupturing tendons in her right ankle.",1
An employee was emptying basil from a blender and amputated their right middle finger. A guard was in place at the time.,0
An employee was using a circular saw to cut boards. The saw cut into the employee's right thigh.,1
"An employee was dry mopping the floor when she tripped over her safety shoe and fell to the floor on her left side, breaking her left arm.",1
"An employee was servicing a forklift at a jobsite and changing out the forks when he lost his balance after picking up the first fork. He stumbled and fell backwards to the ground, fracturing his right arm.",1
An employee was working at a dismantler when a coworker hit the employee with a wooden board. The employee suffered a broken arm.,1
"An employee was moving a basket into position to connect a steel beam when the employee was pinned between the basket and a jack beam, requiring hospitalization for fractured ribs and an absence of oxygen in the tissues.",1
An employee was cleaning the throat and screw on a plastic extrusion machine using a rag. The rag and the employee's right hand were pulled into the rotating screw causing the amputation of the middle fingertip and an avulsion to the index fingertip.,0
An employee was standing on a ladder running fiber optic cable when he fell and landed on his feet sustaining a broken right ankle.,1
"An employee was navigating an obstacle course on a powered pallet jack (as part of training to operate the jack). While turning a corner, the jack slid into a rail, pinning the employee's left foot against the rail. The foot and ankle were broken.",1
"On January 18, 2019, an employee tripped/slipped while walking through a parking lot. The employee fell to the ground, suffering a broken right ankle, and was hospitalized.",1
"An employee slipped off a lift gate, fracturing his leg and cracking his right heel.",1
An employee incurred several arm fractures while cleaning a machine.,1
"An employee was replacing the guard on a lint cleaner machine when his right hand was caught inside the machine, amputating multiple fingers.",0
"An employee was attaching a sucker rod ""birdie"" to remove rods. The employee's left hand was pinched between the sucker rod and a tong winch line. The employee suffered a broken finger and a fingertip amputation.",0
"An employee fell in a parking lot while cleaning snow off her car, breaking her leg.",1
An employee sustained a thumb amputation while using a circular saw.,0
"An employee was walking on an ice rink surface to retrieve a hockey goal when he slipped and struck his head on the ice, suffering a concussion.",1
"An employee was in a wood shop, using a table-mounted radial arm saw to cut wood for pallets. As he turned after deactivating the saw, the saw blade cut his finger, causing an amputation. The part of the blade that cut him was not guarded at the time.",0
An employee's left middle fingertip was caught by the latch of a door as it closed. The fingertip was amputated about halfway down the nail.,1
"On January 18, 2019, at approximately 6:45 a.m. an employee climbed on a two-step ladder to gather containers from the top shelf. On the way down, the employee missed the first step and fell on the floor, requiring hospitalization and surgery for a fractured right hip.",1
"At 7:15 a.m., on January 18, 2019, after stepping outside to go to a garage area, an employee slipped and fell on ice. The employee's head struck the ground. The employee was hospitalized.",1
An employee was using a bolt gun when the bolt shot his temple and he sustained a head injury.,1
An employee was showing another employee how to perform a process on a drill press and moving shavings away from the drilled area when the employee's glove was caught in the press. The employee's left ring fingertip was amputated.,1
"On January 18, 2018, at approximately 7:30 p.m., an employee was packing lamps when she experienced severe back pain as she bent over to pick up an empty tote weighing 5.6 lbs. that was laying 12 inches from the floor. She was hospitalized with a bulging disc.",1
An employee sustained a fractured left leg after slipping and falling on ice in a parking lot.,1
"An employee was standing on an A-frame ladder, loading a truck. The ladder kicked out; the employee struck the truck bed and fell to the ground. He suffered head and lower back injuries.",1
"While walking to class, an employee slipped on ice on the pavement, falling and suffering a broken right ankle.",1
"An employee was investigating a problem with a pants press when it trapped his hand, damaging tendons. He was hospitalized.",1
"At about 8:15 a.m., on January 18, 2019, two employees were trying to clear jammed lumber in a saw. While one of the employees was holding up a lumber indexing guide, the saw switched to reverse feed. A 2-inch by 4-inch piece of lumber caught the bottom of the guide, moving it forward, and pinched the employee's index and little fingers. The tip of the little finger was amputated.",0
"An employee was standing on a ladder while working on a light. He had some wires in his left hand and a tool in his right hand. He was in the process of stripping the wire when he experienced an electric shock (220 volts) through his hand and fell off the 10-foot ladder to the ground, suffering bodily trauma. He was hospitalized.",1
"An employee turned while carrying a ladder, then felt a severe back pain. The employee was hospitalized, suffering from swelling on a nerve.",1
"Employees were attempting to lift and move a cellar cover in order to install a work platform in the cellar for a welder. The cover came into contact with the blowout preventer spool, causing it to fall back. An employee's right middle finger was caught between the cellar cover and the tin horn, causing an amputation to the first knuckle.",0
"An employee was replacing the floor trim, using a pneumatic nail gun. A nail hit something and bounced back into his left eye. The employee sustained an eye injury requiring surgery.",1
"An employee was standing on the back side of an 8-foot fiberglass portable ladder at the lower brace and handing a piece of ductwork up to a second employee who was standing on the 3rd or 4th rung on the front side of the ladder.  The ladder collapsed and both employees fell to the ground.  The ladder and ductwork landed on the first employee, who was hospitalized with a fractured lower left leg.",1
An employee was pulling a dolly toward her when she lost her balance and fell to the concrete floor; the dolly may have fallen onto her. She broke her right hip.,1
An employee fractured a leg after falling from a step ladder.,1
"An employee was unbolting a hopper on a vertical fertilizer blender so that it could be loaded for transportation. When all the bolts except the corner bolts had been taken off, the top corner bolts pulled though the rusted angle iron (and welds broke on the angle iron itself), causing a motion that sent the employee back and to the ground. The employee suffered a broken coccyx.",1
An employee was using a plastic-handled bristled brush to clean dough from a rotating cutter on a dough sheeter when the brush was caught in the cutter and the employee's index finger contacted the cutter. The employee's right index finger was partially amputated.,0
"An employee slipped on water on a hallway floor and fell, fracturing the right ankle.",1
"While operating a stock picker at the Value City Furniture Distribution Center, an employee's hand slipped off the steering mechanism and the stock picker veered towards racking. The employee jumped off the stock picker while it was in motion, and the machine ran over his left foot.",1
"An employee stepped from a catwalk onto a roller bed module feeder to remove plastic from a cotton module. The employee's right foot was caught in a roller, causing an amputation to the foot.",1
"An employee was spraying out glue pans and machine side frames with a water hose. As the employee used a brush on the glue roll as it was turning, his glove and the tip of his right ring finger were caught and pulled between the glue roll and the anti-wrap bar. He suffered a fingertip amputation.",0
"An employee was exiting the building to access her car in the parking lot when she slipped and fell on the icy sidewalk, fracturing her left leg and requiring hospitalization.",1
An employee was descending a flight of stairs when she tripped and fell sustaining broken ribs and a knee injury.,1
"An employee was driving a wedge into a tree that was being felled. The wind blew the tree down in the opposite direction from the one intended; part of the tree struck the employee, causing a broken left ankle.",1
"An employee was standing behind a trailer, holding its door closed. As the trailer backed up, it pinned the employee against the dock, causing hip fractures and pelvic and back injuries.",1
An employee was pushing a patient in a wheelchair and developed chest pain. The employee was hospitalized.,1
An employee's finger was caught in a chain and sprocket causing an amputation.,0
An employee was injecting a vaccine into turkeys when he missed the intended turkey and injected his left index finger.,1
"An employee was holding two young turkeys for vaccination. One of the turkeys fell, and the employee was injected with a small amount of the oil-based vaccine while trying to catch it.",1
An employee was sharpening a chalk stone using a 7-inch hand held grinder. The employee was struck by the grinder and sustained a laceration to the right wrist requiring hospitalization.,1
An employee was helping a forklift operator when the forklift struck the employee. The employee was hospitalized with a fractured right ankle.,1
"While walking down stairs, an employee lost balance and fell, suffering an abrasion to the left leg and a bloody nose.",1
An employee was helping a mechanic replace a drive belt on an electric motor when the belt and pulley lacerated the employee's right thumb.,0
"An employee was traveling down the right side of a ski run. At the bottom, there is a drop called the water bar. The employee hit the water bar, crashed, and tumbled to the bottom of the run, suffering a back injury.",1
An employee was inserting a pipe into a piece of a pasteurizer while troubleshooting a problem. The employee's right ring fingertip was pinched between the end of the pipe and a stationary part of the equipment. The fingertip was amputated.,1
"At 2:45 p.m. on January 20, 2019, an employee was walking back to her parked vehicle after a delivery. She slipped on ice, and her right foot went backwards while her body fell forward. She suffered a closed fracture of the right ankle as well as the foot being dislocated.",1
"An employee was walking on a concrete sidewalk at a landing platform, carrying coffee supplies. Fell on ice and snow, fracturing a tibia and a fibula.",1
"An employee was pumping out water from hospital parking lots with a pump connected to a hose. When disconnecting the hose from the pump, the hose came up and struck the employee's nose, breaking it.",1
"An employee was attaching a pipe wrench to a saver sub in order to torque it to a power swivel. Once the pipe was attached, the power swivel unexpectedly began turning, causing the wrench to spin around and push the employee into the handrails on the rig floor. The employee suffered four broken ribs and internal bleeding.",1
"A piece of plumbing was being removed from a piece of equipment (blender) between the discharge pump and the tub. The piece of plumbing slipped out of the clamp and fell onto an employee's right arm, fracturing it.",1
An employee was exiting the freezer of a restaurant when she tripped and fell to the floor. She suffered a broken pelvis and was hospitalized.,1
"An employee slipped and fell on the tile floor, fracturing her hip.",1
"An employee was pulling a new fiber optic line and fell approximately 30 feet from the bucket to the ground. The employee sustained fractured ribs, hip, pelvis, and an arm.",1
An employee slipped on ice in the parking lot while cleaning her car and sustained a fractured tibia and ankle.,1
"On January 21, 2019, at approximately 1:00 a.m., an employee was walking in the parking lot when a second employee threw a snowball at the first employee. The first employee slipped on ice and fell to the ground while running away from the snowball, fracturing the right ankle and requiring hospitalization.",1
"On January 21, 2019, at approximately 1:00 p.m., an employee was attempting to hook up two trailers using a converter dolly. As the employee was maneuvering the dolly, he slipped and fell to the ground due to ice. When he fell to the ground, the dolly pinned his right ankle against the trailer bumper. He was hospitalized with a fractured ankle.",1
An employee was inside a semi truck scale. He was thawing out the scale using a portable propane heater. A flash fire occurred within the confined area of the scale and caused second degree burns across 70% of his body.,1
An employee slipped on ice in the parking lot during snow removal and sustained a fractured left hand requiring hospitalization.,1
An employee missed a curb step and fell in the parking lot breaking her ankle in three places.,1
"A janitor was entering a restroom, holding a mop with her left hand and the door with her right hand. The door slammed shut, catching her right middle finger between the door and the door jamb. The fingertip was amputated without bone loss.",0
"An employee was helping to move a piece of machinery using the boom of a small backhoe, guiding it with his right hand. His right index finger was caught by the bucket when it was set down, resulting in a fingertip amputation.",0
"An employee was exiting a warehouse when the employee slipped on some icy metal stairs, suffering a back injury.",1
"An employee was setting a load bar inside a trailer, on the upper deck. The deck slid, causing him to fall to the floor of the trailer. His leg was lacerated and broken.",1
"An employee was under a wharf crane resetting a water side twist lock. The crane's spread bar and its load of containers shifted and crushed the employee's fingers, causing an amputation.",1
"Two employees were troubleshooting a 750-pound dock plate that was standing vertically in the air. The plate fell onto one of the employees, breaking bones in the right leg. The employee was hospitalized.",1
"An employee was adjusting a gin stand when the employee's left pointer finger was caught in the pulley, resulting in a finger amputation.",0
"An employee had been operating the strapper machine to strap a bundle of lumber. The employee stepped inside the strapper to remove plastic material from the machine. Plastic strap wrapped around her right leg, pulling her into the bundle of wood and breaking her right tibia.",1
"On 1/21/2019, an employee was opening the door to the laundry area when the employee's hand was caught in the automatic closing doors, resulting in a fingertip amputation.",0
"After scraping ice off a garbage truck's windshield, an employee fell while stepping down from the cab. The employee landed on the concrete of the parking lot about 2 feet below, suffering a broken left femur.",1
"On January 21, 2019, at approximately 6:30 a.m., a seamer operator was attempting to remove a can end when their left arm was pinned between the pocket arm and the frame of the roto-feeder machine. The employee was hospitalized with fractures to the left ulna and radius.",1
"An employee was operating a lathe and was sanding a 1.5 x 20-inch chrome pipe with sand paper when the sand paper became caught on the rotating chuck. The sand paper grabbed his glove and pulled his right hand and arm into the machine, up to his neck. The employee suffered a severe laceration to the face and neck.",1
"An employee was walking through a bay in an airport building. An airplane in the bay had just been coated with de-icing fluid, which was dripping onto the floor. The employee slipped on the accumulated fluid and fell, suffering a broken right arm and a broken right femur.",1
"An employee was measuring the radius of the community exit/entrance when he was struck from behind by a car, dislocating the left ankle and shoulder and fracturing the left fibula.",1
An employee was carrying a bucket of flowers up a flight of stairs. He lost his footing and dislocated his ankle.,1
"An employee was walking across the driveway when he slipped on ice and fell to the ground, breaking his right lower leg and ankle.",1
"An employee was attacked by a patient while cleaning bathrooms, suffering head and face injuries that required hospitalization.",1
"An employee was working near the forming line when the employee's clothing was caught in a conveyor, resulting in a broken arm.",1
An employee was setting up a portable desk in a jobsite trailer. His left index finger became caught in the hinge area of the desk and was amputated at the first knuckle.,0
"An employee was riding a four-wheeler from a shop to an office. As he made a left turn, the ATV rolled over him, fracturing his skull. Personal protective equipment was not being worn at the time.",1
An employee fell from a roof to the ground about 20 feet below. The employee suffered a concussion and fractures to the vertebrae and hip.,1
An employee fell while walking on top of a new construction ship due to a cramp in his foot. He  sustained a broken hip.,1
"An employee was standing on a 3-foot step ladder in a kitchen area, cleaning a hood. The employee fell to the floor, suffering head and back injuries.",1
"An employee was exiting a metal dumpster after dumping a small pull cart with wheels when she took a misstep from a height ranging from 11.5 to 13.5 inches, resulting in a broken and dislocated ankle.",1
"After one of the mechanics repaired the chocolate pump on the trailer, an employee reached into the hose opening and sustained the amputation of the left middle fingertip. The pump was in operation at the time.",0
"An employee was operating a pulling unit to pull rods when his finger was smashed under the rod elevator, resulting in a little fingertip amputation.",0
An employee was in a warehouse when a forklift ran over their feet. The injured employee was hospitalized.,1
"Three employees were constructing a dugout in a baseball stadium. They were on top of the dugout, laying decking down. One of the employees picked up a panel and a gust of wind took him and blew him off the dugout roof. He fell 10 feet, landing on a pile of packed dirt and breaking his hip. Fall protection was not being worn at the time.",1
"An employee was unloading a trailer using a pallet jack on a raising platform. The pallet jack got stuck and when the employee tried to move it, he stepped back and fell off the platform, sustaining a broken left arm.",1
An employee was cutting T-bones with a band saw. The employee's fingers contacted the band saw blade resulting in amputation of the left thumb tip and fingernail.,0
A tractor operator fell backwards while getting out of the spreader. He was hospitalized with back pain.,1
An employee was re-aligning a chain and sprocket on a conveyor. The employee's left hand slipped and his finger was pulled into the sprocket causing a fingertip amputation. The machine was on at the time.,0
"A nursing care technician entered a soiled utility room to place a dirty food tray in a cart. She slipped on a liquid on the floor and fell, injuring her lower back.",1
"An employee was operating an overhead crane to move an I-beam that was 30 to 40 feet long. Half of the beam was outside, while the other half was inside. The employee was walking beside the I-beam when a gust of wind started to move the beam, causing it to strike and pin the employee against a wall. The employee sustained chest and internal injuries, requiring hospitalization.",1
"An employee was working from a ladder when it began to wobble. She fell to the concrete floor, suffering a compression fracture of a vertebra in her lower back.",1
An employee was pulling a mail tray to put in a container and felt a pull in his back.,1
An employee was working in a manlift basket when the basket launched him into the air. The employee fell back into the basket and stuck his head causing a skull fracture. The employee was hospitalized.,1
An employee had been adjusting a belt on the deboning machine. As he was checking the belt his left middle finger got pulled in between the belt and pulley and was amputated.,1
"A temporary employee was preparing to clean excess sludge from a slow-RPM paper roller. The roller caught the employee's shift sleeve, pulling his left arm into the in running nip point and breaking bones in the arm.",1
"An employee was sanding product on a lathe with both hands when the employee's glove became caught, pulling both arms into the lathe machine. The employee suffered broken left and right arms.",1
"An employee was maneuvering a large pump when the hose at the top of the pump hit the ceiling, causing the pump to tip over onto the employee's left ankle. The employee sustained two left ankle fractures.",1
"On January 22, 2019, an employee was struck by a truck that was backing up in the parking lot and sustained broken ribs and an air pocket in the lungs.",1
"An employee was using a pipe wrench to loosen a part in a vise. When the wrench moved, the employee's thigh muscles were torn at both knees. The employee was hospitalized, requiring surgery.",1
An employee was working in the mattress department when she tripped on the wheel of a mattress frame and fractured her right hip.,1
"An employee was feeding the cone on a machine with wire. The wire wrapped around the employee's hand, causing the amputation of a fingertip.",0
"An employee was working on a conveyor that had just been manufactured, testing its speed. A section of the conveyor was missing rollers; this exposed the V-belt and pulley sheave. As the employee measured the belt's speed, his left ring finger was caught between the V-belt and pulley sheave and was amputated.",0
"An employee was hospitalized with a head injury after a slip, trip, and fall incident on an icy working surface.",1
"An employee was preparing to dispose of an old box of pyro-technics (known as stars), which required conducting a controlled burn. He dumped his box out onto the ground and a few stars rolled over to a hot area where a previous controlled burn had just occurred. The stars ignited, creating a chain reaction. The employee sustained first degree burns on the neck and face, as well as third degree burns on both arms, hands, and legs from the knee down.",1
An employee was mixing batches of food in an industrial food mixer. The mixer blades amputated the employee's right hand at the wrist.,0
"An employee was working on a planer, either cleaning or unjamming the in-feed rollers. The rollers caught the employee's right hand, breaking it in three places. The planer was not locked out/tagged out at the time of the incident.",1
"After operating a liquid pharmaceutical machine to make a batch, an employee began to disassemble the machine for cleaning. The employee placed a towel in the machine, which sucked in the towel and the employee's left hand. The employee sustained a partial left index fingertip amputation. The machine was not turned off and was not locked/tagged out at the time of the incident.",1
"An employee slipped and fell to the ground, breaking the right ankle and requiring hospitalization.",1
"An employee's hand was inside a press brake when the machine was activated via the foot pedal, causing it to partially cycle and crush his hand.",1
"A mail carrier slipped on ice and fell to the ground while delivering mail, suffering a broken right clavicle and broken ribs on the right side.",1
"An employee was putting a module chain on a sprocket on a yard truck. His hand was caught and pinched under the chain, causing the tip of his right first finger to be amputated.",0
An employee was spotting a delivery truck that was backing up to the back door of the building when the truck struck the employee. The employee suffered a pelvic fracture.,1
"An employee was walking down a hall to a work area when his left pinky fingertip was caught in a door hinge, resulting in a fingertip amputation.",1
"An employee was climbing a ladder to access a roof. The ladder slipped and the employee fell, suffering a crack and a hairline fracture to two lower-back vertebrae.",1
"An employee was moving pallets with a stand-up rider pallet jack. He was entering a large garage door style opening with his pallet jack when he hit the side of the opening. He lost his balance and overcorrected. His leg was then caught between the pallet jack structure and the guardrail, breaking his lower leg.",1
"While walking toward a parking area, an employee slipped on ice and fell to the ground, suffering a broken right fibula and right ankle.",1
"An employee was walking across the deck of a barge in the dark to move a vehicle that was in the way of the 
unloading process. About 6 feet before the employee reached the truck, he stepped into an open deck plate. The employee 
fell into the tank and dropped about 18 feet down onto an elevated metal platform inside the tank. He fractured both ankles and also sustained 
bruising on both elbows and forearms; a large contusion to his right shin; and minor bruising on his chest, back, and face.",1
"On January 22, 2019, an employee suffered a broken hip while walking over a mound of snow.",1
"An employee was climbing down from a six-step ladder. She fell, suffering a broken leg.",1
"On January 22, 2019, an employee fell from the top of a heating oil truck, breaking several ribs and suffering a concussion.",1
"On 1/22/2019, an employee fell to the ground in the parking garage and broke his hip, requiring hospitalization.",1
"An employee was removing a plastic component that was jammed in a de-energized machine. The employee placed their left hand on a metal slide, then used pliers with their right hand to pry the slide open. Upon applying significant force to the slide with the pliers, the jam broke free. The employee's left index fingertip was pinched and amputated between the slide and an adjacent metal surface.",0
"An employee was walking from a general contractor's trailer to a work area, near a temporary roadway that was being used to bring heavy equipment to the construction site. The employee was struck by a trailer, suffering two broken legs.",1
"An employee was trying to move a roll cart to access a cable. The cart fell on top of the employee, breaking the employee's femur and right knee.",1
"Two employees got into a heated argument and agreed to step into the men's restroom to fight. One of the men fell and struck his head on the sink, suffering a fracture and swelling of the right eye socket. He was hospitalized.",1
"An employee was attempting to undo a sling between a crew material handler truck that was struck in the mud and a four-wheeled pickup truck that was pulling the crew material handler truck when the four-wheeled truck rolled back, pinning his right leg. He suffered lacerations, punctures, and a damaged main artery behind his right knee, requiring hospitalization.",1
"An employee was carrying a gear box weighing approximately 35 pounds when the gear box was dropped on the employee's thigh, resulting in a blood clot.",1
An employee slipped on ice and fell to the ground in the parking lot while walking from a vehicle. The employee suffered rib and pelvic fractures.,1
"While checking on equipment on the back of a welding truck, an employee fell off the back of the truck to the ground about 36 inches below. The employee suffered multiple fractures and was hospitalized.",1
A caregiver fell down a flight of stairs while taking the trash out of a resident's apartment. She suffered broken facial bones and was hospitalized.,1
"An employee was inspecting carpet at a third-party contract coating facility. As the carpet was run through a shearing machine, the employee's left hand was pulled into the machine, causing lacerations and amputation of fingers.",1
"An employee was standing on a stool while cleaning a piece of equipment when the employee slipped. The employee reached out to catch themselves, and the employee's hand contacted the blades on a machine, causing lacerations to three fingers.",1
"An employee was walking and guiding a piece of equipment on a well pad. He slipped and fell on a large containment pad, landing on the ground and breaking his right tibia.",1
"While walking across a parking lot, an employee slipped and fell on the icy surface. The employee suffered three broken ribs and a punctured/collapsed lung on the left side.",1
"An employee was unpacking boxes at a receiving table. The employee tripped on a cable that had dropped off the table and fell, suffering a broken hip. The employee was hospitalized.",1
An employee fell off an extension ladder while bringing material up.,1
An employee was putting a part into a milling machine when a pneumatic vise closed on the employee's fourth fingertip. The fingertip was amputated.,0
An employee stepped into an indentation under the carpet while vacuuming and suffered a fractured right tibia and torn right meniscus.,1
"Employees were replacing a cooling tower fan belt. After the new belt was installed, the injured employee started up the equipment and the belt caught the employee's glove resulting in amputation of the thumb tip.",1
"On January 22, 2019, an employee was walking up exterior stairs that were icy when he fell and hit his head on the stairs. He was hospitalized with head injuries.",1
"An employee was troubleshooting a compressor when a fire occurred, burning his hands. He was hospitalized.",1
"A delivery driver was closing a rollup trailer door. The door closed on his left hand, amputating the tip of his left middle finger.",0
"An employee was working on a ladder inside of a hot zone (internal part of the furnace). While stepping off of the ladder, he fell approximately 6 feet.",1
"An employee was operating a block chopper. A frozen block of product was not feeding properly. While the employee was adjusting it with a meat hook, the chopper grabbed the hook and the employee's right little finger was pinched between the hook and the chopper's feed shoot. The fingertip was amputated.",0
"An employee was throwing trash into a dumpster when he slipped and fell onto the paved driveway below, breaking his ribs and tearing his kidney.",1
"An employee was servicing a conveyor. He fell in a pile of sand and the conveyor caught his left hand and forearm, causing fractures to both. The conveyor was not guarded at the time of the incident.",1
"A delivery driver was beaten in a robbery attempt. The driver was punched and kicked in the ribs and torso area, suffering a potentially punctured lung and broken ribs.",1
"An employee was unloading a shipping container when an aluminum door and window fell over, striking the employee in the right leg. The employee suffered a broken femur.",1
"While getting materials from their car in the hotel parking lot, an employee slipped on ice and fell. The employee sustained a fracture to the pelvic head of their left femur.",1
"An employee was welding from a scissor lift. As the lift moved, he was caught between its rails and a beam. His chest was crushed.",1
"An employee was working on a production line, removing a piece of a cable from a spooler. His hand was smashed between the machine and the wire spool. He was hospitalized, undergoing surgery.",1
An employee was cutting metal on a manual shear and sustained a finger amputation.,0
Two employees were demolishing brick and stone from a facade. The first of them was using a hammer drill to demolish the brick and stone; the second was holding the stone to prevent debris from falling to the ground. The drill bit slipped and the second employee's right ring fingertip was amputated.,1
"An employee fell on a sidewalk, breaking his collar bone.",1
An employee lost his balance while working on a roof installing metal sheet over metal joists. He fell 14 feet landing on the ground and suffering a fracture.,1
Employees were using a cable grip device to remove the end cap of a water main. An employee's left hand became entangled in the device's metal cable; the tip of his ring finger was amputated and his middle finger was broken.,0
"An employee dismounted a vehicle and hit the ground, suffering a punctured lung.",1
"An employee was operating a walk-behind skid steer. He was traveling under an elevated 18"" pipe when the front of the machine dropped into a hole, raising the back of the machine and pinching his left hand between the machine and the pipe. He suffered an amputation of his left middle fingertip (approximately 1/2 inch).",1
An employee was walking across an aisle to her work station when she tripped and fell to the concrete floor. She suffered a tibiofibular joint dislocation and was hospitalized.,1
An employee was unjamming a meat grinder when it amputated the employee's fingertip.,0
"On January 23, 2019, a temporary employee was operating laser cutting equipment. As the employee lifted a part out of the laser nest with a magnetic lift and chain hoist, one of the employee's fingers got stuck between the part and the laser nest. The fingertip was amputated.",0
"An employee slipped on ice while exiting a job trailer, suffering a broken hip and shoulder.",1
"While walking down steps, an employee slipped and fell on ice, suffering a broken right ankle.",1
An employee working in the warehouse was lifting a 250-lb. laundry bin when the lifting arm failed. The employee was hit by the bin and sustained a broken rib.,1
"While lifting a bucket of oil, an employee slipped on the floor. His foot was caught between two pipes that ran along the floor, and the fall caused him to dislocate his ankle and break his fibula.",1
"A driver was carrying out an onsite propane fill from a bobtail truck. There was a fire, and the employee suffered third-degree burns to 36 percent of his body. He was hospitalized.",1
An employee was on the roof of a new one-story house installing fascia and a drip cap when he lost his footing and fell 10 feet to the ground below. He was hospitalized with a broken back and head trauma.,1
"An employee was sweeping up construction debris on the floor when he fell down a stairwell, breaking his pelvis.",1
"An employee was on a ladder when it shifted backwards. The employee fell about 12 feet to the ground, suffering a broken right ankle and a closed compression fracture of a lower-back vertebra.",1
An employee was struck by a car while crossing the street after verifying the depth of a fire hydrant's water valve. Both of the employee's legs were broken.,1
"An employee was on a 6-foot A-frame ladder, doing maintenance in a packaging area. The ladder twisted and/or collapsed, causing the employee to fall to the floor and suffer a broken pelvis.",1
"An employee was cutting a 4x8 piece of laminate on a router. The laminate fell; the employee reached over, picked it up, and suffered an amputation to the right little fingertip from the router.",0
"An employee was attempting to retrieve an object off of the ground. He leaned over and braced himself with his left hand using part of a forklift. His hand contacted a metal fan inside of the forklift, resulting in a left index finger amputation to the first knuckle.",0
"A driver was about to hook a trailer up to a converter dolly. He bent over and used the handles to pick up the converter dolly, then lost his footing as he moved it forward. As he was catching himself, the eye of the converter dolly amputated the tip of his left thumb just below the bottom of the nail bed.",1
"An employee was sweeping up in a loading dock area when a truck hit him, crushing his ribs.",1
"During a towing and recovery task, two employees were unchaining a forklift from a heavy duty rollback. One of them fell from the deck to the ground about 4 feet below, suffering fractures to the ribs and hip. He was found unresponsive, apparently not breathing, and blue in the face.",1
"While walking into an office building, an employee tripped and fell over a construction fence near the entrance. The employee suffered a broken leg.",1
"An employee was operating a mini-excavator in a saw-cut hole. While the employee was trying to climb out of the hole, the excavator became unstable and tipped over. The employee's left foot was wedged and crushed between the excavator and concrete.",1
"An employee was hanging a calendar. As he leaned on his desk, it broke and he fell, breaking a vertebra in his back.",1
"At about 11:00 p.m., on January 23, 2019, an employee was moving stock with a forklift. The employee dismounted the forklift and some tube stock slid off the forks, striking the employee's right foot and causing amputations to the big, first, and second toes. Steel toe boots were being worn at the time of the incident.",0
"An employee was working from plywood in the space above a storage room and bathroom, running new wiring. The employee fell through the drop ceiling into the bathroom, suffering facial lacerations and a concussion, and was hospitalized.",1
"An employee was operating a glue block saw machine, which caused amputation of the employee's left middle and ring fingertips. The machine was guarded at the time.",0
An employee was walking to the front of the building after fueling a truck when the employee slipped on ice and broke a leg.,1
"An employee was about 10 feet up a ladder in a parking lot, preparing to run cable through a hole drilled in a wall. The ladder's feet lost traction on the wet concrete of the parking lot, and the ladder slid down the wall to the ground. The employee fell, suffering a laceration to his chin, two broken fingers on the left hand, a broken left elbow, a broken right arm and elbow, and broken teeth.",1
"An employee was signaling a truck as it backed up. The truck rolled back, pinning the employee's hand between a camlock union and the DOT bar (bumper). The employee suffered a fracture and dislocation of the left thumb, which was surgically amputated and reattached.",1
An employee suffered a heart attack while shoveling road salt from the back of a truck.,1
An employee fell approximately 15 feet from a portable extension ladder to the cement floor in a chiller plant while attempting to attach a chain-fall onto nylon straps near the ceiling. He was hospitalized with a broken tibia plateau in his right leg.,1
"An employee was standing on a catwalk, helping unload bone meal from a truck in a receiving area.  While trying to address a jam, the employee fell from the catwalk down the side of the truck, landing about 10 feet below and suffering a closed displaced fracture of the left patella.",1
"An employee was winching a dumpster box onto a hauler truck. The dumpster got stuck. While the employee was getting it loose and reeling it in, his thumb was caught between the wire rope and the reel. His left thumb was amputated above the knuckle.",1
An employee was showing another employee how to clear a part if it gets stuck in the conveyor belt and sustained a right index fingertip amputation.,0
"While opening a ladder, an employee slipped on water on the tile floor and suffered a broken leg.",1
"While coming down the ladder of a machine, an employee missed the last step, fell onto the concrete, and broke a hip.",1
An employee was operating a polishing machine when the polishing wheel caught his gloved right hand. The tip of his middle finger was amputated.,0
A carpenter was cutting a 2 x 6 using a circular saw when it amputated his right little and ring fingers.,1
An employee had installed a flapper valve on a fresh water tank on a boiler. He was standing next to the pipe release valve when the valve turned on and potassium chloride sprayed into the employee's eyes causing chemical burns.,1
"At about 3:45 a.m. on January 24, 2019, an employee was emptying parts from an electroplating barrel. He rotated the barrel to get the last of the parts, and the gears caught his glove. His left hand was pulled into the gears, resulting in the amputation of the last joint of the left middle finger. He was hospitalized.",1
"An employee was on a ladder using a handheld drill with a 5-inch hole saw tool. The drill kicked back and ejected the hole saw. The circular saw blade hit him in the face, lacerating his face from his eye to his jaw. The employee was hospitalized for surgery.",1
A temporary employee was struck by a forklift which was reversing. The employee sustained broken toes and an injured Achilles tendon.,1
An employee was repairing the gearbox in front of an extruder when he came in contact with molten plastic and sustained second degree burns to the left temple and third degree burns to the left forearm.,1
"An employee was using a wire sling to stand up a 1,000-pound sheave wheel in a vertical position. The wheel fell over and hit his left foot, crushing it against a 4-by-4. He was hospitalized, and a toe was surgically amputated.",1
"An employee was hospitalized with chest pains, headache, and nausea due to hydrogen sulfide exposure.",1
"An employee was operating a sheeter machine that made copy paper. While he was removing a butt roll from a core chuck, his left hand was pinched between the chuck and the roll on the core side. His little finger was broken and lacerated.",1
"An employee tripped while exiting his office, falling to the ground and tearing his hamstring. He was hospitalized, undergoing surgery.",1
"An employee was walking into a building when he slipped on the floor and fell, suffering a broken right hip.",1
"An employee was walking from their car to the building, slipped on a piece of ice and fell. The employee sustained a fractured left knee.",1
"An employee was walking to his work truck when he slipped on black ice in the parking lot, falling to the asphalt pavement and breaking his left tibia and fibula.",1
"While brushing snow off a work truck, an employee slipped on ice and fell to the ground, suffering a broken left foot.",1
"An employee slipped while walking up stairs, falling down the stairs and suffering a broken arm/elbow.",1
Two machine operators were clearing a jam in a feeder machine. When the jam was removed the lever that drops the feeder chains was activated and the feeder chains dropped on the injured employee's left hand. The injured employee sustained deep puncture/lacerations and a compression injury to the left hand.,1
"At about 8:15 a.m., while walking into work from the parking lot, an employee slipped on ice and broke a leg. The employee was hospitalized.",1
"An employee was in a cooler, picking orders, when he struck some racking behind him and broke his leg.",1
"While cutting lumber using a chop saw, an employee sustained a partial amputation of the right middle and index fingers.",1
"An employee had clocked out and was leaving the parking lot, when they got into an altercation with a non-employee that resulted in hospitalization.",1
An employee suffered a back injury while maneuvering a rear seat in a transportation vehicle.,1
An employee was struck in the leg while cutting a piece of metal. The employee was hospitalized.,1
An employee was trying to align a bushing when the machine suddenly energized. The tap head lacerated the employee's right hand and broke a finger. The machine was not locked out at the time.,1
An employee was loading sheet steel on the wood with the crane when his finger was caught and crushed between the wood and the steel.,0
"An employee was transferring materials using a dolly cart. As he was trying to load the cart on a weighing scale, it tipped over on top of him, lacerating his nose and lip and breaking his ankle.",1
A mail carrier had been delivering mail on their route and was hospitalized for frostnip to fingers and toes and for dehydration.,1
"At 9:30 p.m. on January 24, 2019, an employee was outside a building, pulling an empty metal cart up a slight elevated grade to a truck. The cart struck him, tearing his Achilles tendon.",1
An employee was walking out of a stock room when she tripped over a box and fell to the floor. She suffered a broken right hip.,1
"An employee was helping a forklift driver position the forks behind a vehicle to be picked up. The forks were raised, and the employee's right thumb was crushed between them and the vehicle.",0
"An employee was placing a sheet of glass into a hard rack. The glass slipped from his hand; a piece broke off and hit his steel-toed shoe just above the toe cap. His foot was cut and he was hospitalized, undergoing surgery to remove a shard of glass.",1
"An employee slipped on ice in a parking lot and fell to the ground, suffering a broken hip.",1
An employee was cleaning a rotating rubber-covered roller with steel wool when his arm was caught and broken by the rotating shaft.,1
"A delivery driver slipped on ice while exiting a vehicle and fell backwards. The employee's head struck the asphalt, causing lacerations and trauma. The employee was hospitalized.",1
An employee slipped and fell on ice outside of the store. The employee was hospitalized with an injured elbow.,1
"At 11:45 a.m., on January 24, 2019, two employees were inspecting the feed throat of the barrel in an injection molding machine that was having a material flow issue. The screw was retracted and overheated degraded nylon was forced out through the screw feed throat, burning one of the employees on the hands and face. Personal protective equipment was not worn at the time.",1
A pressure gauge was removed while observing a pressure survey on the crude unit and an employee received first and second degree burns.,1
"An employee stepped out of his vehicle to deliver a package, slipped and fell on ice. He sustained a hip fracture/fractured ball joint.",1
"An employee was manually cleaning rotating rolls when they caught his gloved hand. His arm was pulled into the rollers. He was hospitalized, undergoing surgery.",1
"A crew of carpenters were in an electric work cart near a handrail. As the driver of the cart was backing the cart up, the heel of his left foot came into contact with the rail, causing his foot to twist. The foot was broken and he was hospitalized, undergoing surgery.",1
"An employee was training on the operation of a pallet jack when it tipped over, pinning him. He suffered a possible fractured rib.",1
While breaking apart drilling augers an employee was struck in the head by a pipe wrench and sustained a head injury.,1
"An employee had just finished maintenance on a case erecter and had removed lock out from the machine to re-energize it. As he was explaining to another employee what he had done, the machine cycled and amputated his left middle finger.",0
"An employee was descending a ladder, lost footing and fell to the floor breaking a hip.",1
An employee working inside the street barriers on the shoulder of an on-ramp was struck by a  vehicle that swerved into the jobsite. The employee was hospitalized due to a fractured pelvis and internal injuries.,1
An employee was working outside conducting a bump test on a rotor motor for aircraft fuel when the rotating motor amputated the employee's right index finger and partially severed the right middle finger.,1
An employee was working on a ladder at a customer site when they fell from the ladder to the concrete floor and sustained a back injury and fractures to both wrists.,1
"An employee was walking in the corridor, slipped on water and fell to the floor. The employee was hospitalized with a hip fracture.",1
"While walking and working on the road widener machine, an employee fell and broke his left ankle.",1
"While bending rebar, a piece of rebar sprung loose from the bending machine and struck an employee in the neck. The employee was hospitalized with a torn esophagus.",1
"While administering oral medication to a bear, an employee was bitten by the bear and the distal phalange on the left middle finger was amputated.",0
"An employee was completing a film change over on a bag maker machine. She engaged the machine to advance the film and as she realigned the film, her right middle finger became caught in the machine resulting in the amputation of the fingertip.",0
"An employee was conducting maintenance on a conveyor chain drive on a polisher when their right hand was caught and rolled though the sprocket. The index, middle, ring, and pinky fingers were lacerated.",1
"On January 25, 2019, at approximately 4:29 a.m., an employee fell on icy/snowy cement stairs while walking to his car to leave work for the day. He was hospitalized with syncope, lower back pain, and sprains/strains to the lower back, left hip, left knee, and left femur.",1
"An employee was cleaning a restroom when the door struck her foot, causing her to fall to the floor and break her arm. She was hospitalized.",1
A swivel snagged on a Kelly bar. An employee was trying to un-swivel the wire rope while the swivel was turning. The wire rope was winded up and when the tension was released it caught the employee's left hand resulting in the partial amputation of a finger.,0
An employee was working to unhang a belt on a dryer with an extension device. The device got wedged and the employee went through a barrier rail to remove it. His left arm came in contact with the belt sprocket and was pulled into the equipment. The employee received a fracture and laceration to the left arm.,1
An employee was cleaning the rollers of a conveyor belt when their arm became caught in the rollers and sustained open fractures of the radius and ulna bones in the left forearm.,1
"An employee was trying to remove and re-stack cases from a pallet that had turned over on the fourth level of a storage rack in a freezer. He placed two empty pallets in the rack, one to stand on and one to stack product cases on. He climbed up the end cap and onto one of the empty pallets. The turned-over pallet of product shifted, knocking the empty pallet through the racking. The employee fell approximately 20 feet from the fourth level and sustained a neck fracture.",1
An employee was driving a forklift when it ran over a 6 x 6 piece of wood. The employee was thrown up in the air and hit his head on the top of the forklift cage causing a deep head laceration and ruptured artery.,1
"An employee lifted a 55-gallon plastic tank filled with trash to empty it into the dumpster. He placed the 55-gallon tank upside down so it could be completely emptied. The employee then climbed into the dumpster and knelt on the container wall. When he tried to shake the tank to empty it, he lost balance and fell 4 feet to the pavement resulting in a compression fracture to the back.",1
An employee's leg was pinned and broken between a repair rack and a tool box.,1
An employee was in a man basket that had been lifted by a forklift feeding a kiln. The man basket fell from the forklift approximately 12 feet to the ground. The employee sustained fractures to the pelvis and elbow.,1
As an employee stepped out of his vehicle he slipped on ice and fell to the ground breaking his left hip.,1
An employee was working on a flat roof with a 2-foot parapet. He was laying a roll of tar paper when he stumbled and fell over the parapet onto an adjacent scaffold and then fell down to the ground. The 30-foot fall caused a head fracture and a broken arm.,1
"An employee was walking away from the worksite where he had just attached a steel cable to the pulling machine. The employee was struck by a steel cable that broke off from a fiber rope. The employee sustained a right side clavicle fracture, left side rib fracture, and a collapsed lung.",1
"An employee was climbing up a ladder to replace a metal roof. As he was getting ready to connect to a life line, he slipped and fell approximately 20 feet onto metal roof panels. The employee sustained a broken arm, pelvic fracture and facial bruises.",1
An employee slipped and fell on ice in the terminal yard. The employee was hospitalized with a dislocated and broken ankle.,1
An employee was working in a boom lift changing out light fixtures when their arm became caught between the lift basket and a rack. The employee was hospitalized with a right radius fracture and open wound.,1
An employee was on a scissor lift approximately 20 feet high when a forklift made contact with the aerial work platform causing it to tip over. The employee was hospitalized with a head injury.,1
An employee was cutting the banding from around a group of pipes when the pipes rolled over his foot and twisted his knee. The employee suffered a left kneecap fracture.,1
An employee was ripping plywood on a table saw and amputated the tip of his right thumb.,0
An employee was standing on the bank of an excavation. The side of the excavation gave way and the employee fell in. Concrete pieces fell on top of him and he sustained a broken leg.,1
"An employee tripped and fell in the office, hitting her head. She was hospitalized.",1
"An employee was walking across a parking lot, slipped on ice and fell sustaining a fractured hip.",1
"Two mechanics were working together on a spring assembly bench. A leaf spring being held by a hydraulic clamping system flipped, and the clamp caught and broke one mechanic's arm.",1
"At approximately 11:00 p.m., on 1/25/2019, an employee pulled a bottle from a running machine for a required quality check and caught his left index finger in the machine resulting in a partial amputation of the fingertip. The machine was guarded at the time.",0
"On January 25, 2019, an employee was on a step ladder changing a lightbulb. The bulb dropped and as he tried to catch it, he lost balance and fell from the step ladder onto the floor. He was hospitalized with a broken pelvis.",1
An employee's hand was caught in the screw feed of a milling machine. One of his fingertips was amputated.,1
"An employee's right ring, middle, and little fingers were partially amputated while removing a box jam from a rotary die cutter.",0
A forklift backed into an employee and fractured his hip.,1
"An employee was walking across the parking lot when he slipped on ice and fell to the ground, fracturing his hip and requiring hospitalization.",1
An employee was operating a stand-up dock stocker and struck the bollard protecting the sprinkler room. The employee sustained the amputation of three toes on the left foot.,0
"An employee was cutting tissue for examination. During this process, the employee sprayed a freezing agent on the tissue while it was in the cryostat and a flash fire occurred. The employee was hospitalized with burns to the face and neck.",1
An employee was clearing a jam in the chute of a running machine and was caught by the auger. The employee sustained the amputation of the right index finger to the first knuckle.,0
An employee was moving a roof top air conditioning curb and fell approximately 15 feet though a skylight to the floor. The employee's pelvis was fractured in four places and surgery was required.,1
Two forklifts collided; one of the operators had a heel caught between the two vehicles.,1
"An employee was engaged in drywall installation in an attic. The employee fell through the ceiling and landed on the concrete floor below, injuring his hands and nose.",1
An employee was cutting T-bone steaks with a push tool when their hand slipped. The employee sustained the amputation of two fingers on the right hand.,0
An employee slipped on ice and fell breaking his tibia in three places.,1
An employee was putting returns away when she fell and bruised a knee.,1
"An employee was clearing a jam in a gear machine. The employee cleared the jam using a small torque wrench, but another part jam occurred right behind the original jam. After unjamming those parts, the employee used a screwdriver to hold the parts back and his left index finger to prevent the next parts from coming down the track. One of the parts was released and caused the sensor to call for another part. The gate came down and cut his index finger resulting in a partial amputation.",0
An employee fractured a rib when he slipped and fell on a hose reel.,1
An employee was towing empty storage racks with a tug. The employee stopped the tug and was adjusting the racks when the tip of his left thumb was pinched and amputated between the racks.,0
An employee walked into the lobby at work and tripped/slipped on an umbrella bag and fell. The employee was hospitalized with a fractured shoulder.,1
An employee picked up a wear bushing that weighed approximately 50-60 pounds from a table. The employee carried it and went to set it down when it slipped. His finger was pinched between the bushing and the sub-setting. The employee sustained the amputation of his right ring fingertip.,0
An employee was tightening a bolt for the mill draw bar. He lost his footing and fell approximately 3 feet sustaining a fracture to the left arm.,1
"While lifting boxes containing bananas, an employee experienced a pinched nerve. The employee was hospitalized with a herniated disc.",1
An employee was lowering an 82-pound steel stud into a PVC pipe when his right little finger was caught and fractured between the steel stud and the PVC pipe.,1
An employee slipped and fell on snow/ice while walking from the rail shed to a stationary rail car to tighten the hand brake. The employee sustained a rib fracture and possible pneumothorax. The employee was hospitalized.,1
An employee fell off a locomotive's ladder.,1
An employee was boarding a rail car that was moving approximately 2 miles per hour. The employee fell down and their left foot was run over. The employee required the medical amputation of the leg to just below the knee.,0
An employee was reversing a reach truck when he struck a bumper and sustained a broken left leg.,1
"An employee was standing with one foot on the end of a fryer and the other foot on another surface, while cleaning a fryer hood with a duster. The employee's right foot slipped and went into the hot oil causing second and third degree burns to the right foot.",1
An employee had chest muscle pains after finishing snow blowing. The snowblowers reverse gear was not working properly.,1
"An employee fell, suffering brain bleeding as a result.",1
An employee fell to the ground while exiting the bathroom and suffered a left hip fracture.,1
An employee slipped and fell on the floor resulting in a broken leg.,1
"On January 28, 2019, at approximately 1:30 p.m., the injured employee, a scrap operator and employee in training for locomotive operations, was performing scrap railcar spotting operations with a trainer at the half track at Timken Steel Corporation scrap yard. Both employees were riding the leading edge of the railcars proceeding in an easterly direction. The injured employee was riding on the north side of the railcar and the operator was on the south. As the railcar went around a slight bend in the tracks, the injured employee was struck in the lower left leg by a piece of scrap steel. The scrap steel was frozen into the ground and sticking up and was not clear of the railway. The injured employee suffered a broken tibia and fibula that required surgery to repair.",1
"An employee was moving boxes from one conveyer belt to another when something scratched her left ring finger. Her finger became infected, requiring hospitalization.",1
An employee was removing adhesive with a jointer when the jointer caused a partial amputation of the employee's left middle finger.,0
An employee was cleaning the rotary valve of a machine when his right middle and ring fingers were caught in the valve. The employee was hospitalized and both fingers were amputated to the first knuckle.,1
"An employee was wearing a lead vest while bending down to troubleshoot ultrasound equipment when she felt pressure and pain in her lower back and legs, requiring hospitalization.",1
An employee was hospitalized for irritation and swelling of the airway after being exposed to anhydrous ammonia from a leaking condenser on the roof.,1
"An employee was loading metal onto a skid when he turned his foot, lost balance, and dropped the metal. He then fell onto the metal, which lacerated a tendon in his left forearm.",1
"An employee was collecting carts when the employee's left index finger was caught between two carts, resulting in an amputation to the finger (no bone loss).",0
"An employee was cleaning the operating room, slipped and fell resulting in a fractured left hand.",1
"An employee was climbing a ladder to switch off a valve when the employee fell from the ladder, suffering knee and hand injuries.",1
"An employee was microwaving water during food preparation when her apron string was caught on the microwave. When she walked away, the microwave was pulled violently. This caused the hot water to fly out and land on her right hand, resulting in severe burns.",1
"An employee was sticking a rod through an inspection port to clean lime from the bucket elevator inside a lime kiln. He slipped and the rod and hot lime came out of the inspection port. The solid lime particles contacted his right forearm, causing second degree burns that required hospitalization.",1
"On January 28, 2019, at approximately 4:35 p.m., an employee was attempting to move a plastic banded pallet in the bed of a pickup truck when the strap broke causing the employee to fall backwards out of the truck onto the concrete floor. The employee sustained head and neck trauma.",1
"An employee was riding a maintenance tricycle in the facility when he fell from the tricycle, striking the back of his head on the concrete floor.",1
"An employee was fixing a frozen sump pump drain. As the employee was walking up two steps, the employee slipped and fell. The employee suffered two brain bleeds and a contusion to the back of the employee's head.",1
"An employee was setting up RNC (mesh) bags when she slipped on a bag and dislocated her left ankle, requiring hospitalization.",1
"An employee was unloading boxes from a conveyor belt when his left hand contacted the belt while it was moving and was then caught under the conveyor plate, resulting in the partial amputation of two left-hand fingers.",0
An employee tripped over her coat and dislocated her shoulder on the floor.,1
An employee slipped on ice in the parking lot and fell striking his upper back and head. The employee was hospitalized for a fracture of the T5 vertebra.,1
An employee was lifting a coil of metal with his forklift. The load did not settle properly so he attempted to adjust it. The load then shifted and amputated his left middle finger above the first knuckle.,0
"On 1/28/2019, an employee was hospitalized after slipping off of the step of his dump truck and suffering a concussion.",1
"An employee was working from a scaffold chiseling mortar. As the employee set his tools down onto the walk boards between two outriggers, the walk boards gave way and the employee fell feet first to the ground below. The employee suffered a broken ankle and was hospitalized.",1
"An employee was standing near a sandblasting pot when the 2-inch air hose came uncoupled from the pot. Its four-lug couple struck him in the face, causing a fracture to his lower jaw, soft tissue damage to his face, and deep lacerations to his lower face. He was hospitalized.",1
An employee tripped on a floormat and fell breaking a hip.,1
An employee was cleaning the floors using a floor scrubbing machine when she fell and came into contact with corrosive floor stripper chemicals. She was hospitalized with chemical skin burns.,1
"An employee was jogging a machine to verify a preventative maintenance task had been completed when his fingers were pinned between the machine's belt and pulley. He suffered fractures to the topmost joints of his right index and ring fingers, requiring hospitalization.",1
An employee was stepping down from her work stand when her foot was caught in a cardboard box and she fell to the floor. She was hospitalized and required surgery for a compound fracture of the right wrist.,1
"An employee was stepping off an 8-inch step, slipped on some concrete slurry and fell breaking the left tibia and fibula.",1
"An employee was crawling under a truck/trailer to service the water pump PTO when his arm was caught in the rotating PTO driveline, severing his right forearm and requiring hospitalization.",1
"Two maintenance employees were working together replacing a shaft pin, bushings, and spacers on a crimping machine. While they were attempting to lower the top half via a crane into the bottom half, the parts became misaligned. The first employee used his finger to feel inside the shaft hole and determine why it was not fitting together. The second employee, who was at the controls of the hoist, lifted the part, causing the very tip of the first employee's left index finger to become caught. The first employee suffered a fingertip amputation to the index finger on his left hand.",0
"When an employee clipped the metal banding on a paperboard roll, the banding snapped and struck the employee in the left eye causing a laceration.",1
An employee was filling a tank with water and was struck by a pressurized water blast that knocked him to the ground. The employee hit his head on the pavement and sustained a concussion. The employee was hospitalized.,1
"On January 28, 2019, an employee was using an industrial reamer and suffered the amputation of the right ring finger past the second knuckle.",1
"An employee was driving a delivery vehicle when he determined that he needed to put on chains to reach the delivery location. While he was stopped in a parking lot to put on chains, a vehicle in front of him (also putting on chains) began to slide into him due to icy conditions, pinning him against the truck. He sustained damage to his ribs, lungs, and shoulder, as well as nerve damage to his neck and left arm.",1
An employee fell while exiting the bucket of a bucket truck and suffered a fractured tibia. The employee was hospitalized.,1
A temporary employee was using an electric nail gun to build product when a nail nicked his right thumb nail. He was hospitalized due to an infection.,1
An employee was trying to free a piece of trim that was stuck in the rollers of the roller machine when his left hand was pulled into the machine and crushed. Four fingers on the left hand were amputated. The employee was wearing gloves at the time.,1
An employee was descending stairs while carrying a flat mail tray when the employee missed the last two steps. The employee fell and fractured an ankle. The handrail was not used at the time of the incident.,1
While working on a training project (maintenance and rebuilding of a diesel engine) an employee caught two fingers on their left hand between the camshaft and the front of the engine. The left middle and ring fingers were lacerated near the nail and partially amputated.,0
An employee was opening a heavy steel door when a strong wind blew the door closed striking the employee's head.,1
"The injured employee had just finished delivering gas cylinders to a customer. As the employee was folding the lift gate on the truck to put it away, their left ring finger was pinched between the lift gate and the ramp resulting in amputation below the first knuckle.",0
An employee was taking out the trash at a worksite and suffered a suspected heart attack.,1
"An employee was burning debris in an irrigation canal when he lost his balance and fell into the canal, which contained hot ash and burning weeds.  He was hospitalized with skin burns.",1
An employee was delivering mail on a rural route and fell on an icy surface after exiting the car. The employee sustained a fracture to the lower left leg.,1
A bike messenger was riding a bike to make a delivery. The bike slid on wet/icy pavement and the employee fell resulting in hospitalization for a broken ankle.,1
Three employees were running cans at an aerosol manufacturing plant. Some cans fell into the hot water bath and while unjamming several cans exploded. All three employees were injured. One employee sustained a laceration and bruising to the chest that resulted from a flying can and required hospitalization.,1
"An employee was attempting to unjam a punch press when it was activated via the foot pedal, causing the press to injure the employee's left hand. The employee suffered a left index finger amputation and crushed left ring finger. The press was unguarded at the time of the incident.",1
"An employee was operating a forklift and staging 10"" pipe on a concrete parking lot. The first joint of pipe was set down and the second joint was being retrieved when the first joint began to roll. The employee secured the forklift and went to stop the pipe from rolling, but was struck by the rolling pipe on the back of his leg. The employee fell and the pipe rolled up his leg. The employee suffered a broken foot.",1
An employee was on a ladder working on recessed lighting and was shocked. The employee also sustained a burn to the pinky finger.,1
"An employee was walking to their car after work, slipped on ice in the parking lot and fell. The employee struck their head on the ground and suffered a concussion.",1
"An employee was moving a converter dolly for a tandem trailer. While pushing the converter dolly, the employee felt a pop in his lower back, followed by severe pain. He was hospitalized with two bulging discs and a fractured vertebra.",1
An employee was attempting to free a stuck casting from the casting feeder hopper door. The employee sprayed lubricant on the casting and the casting freed from the door. The employee's right forearm was inside the casting feeder hopper door when the casting was freed and the door closed on and crushed his forearm.,1
"On January 30, 2019, at approximately 4:27 PM, an employee was exiting his tractor-trailer at the truck stop, slipped on an icy L bracket on the truck and fell. He proceeded to disconnect the trailer. While cranking down on the legs of the trailer, which were frozen because of the temperature, he felt pressure and heard a pop. The employee was hospitalized for a hernia.",1
"A lasher employee was injured by a fallen lasher rod that was approximately 8-10 feet in length and 1 1/2 inches in diameter. A second lasher employee was removing a container lasher rod on a top tier rack about 20 feet above ground level on a cargo vessel while the injured employee was working on the middle rack approximately 10 feet below the second lasher employee. The lasher rod popped out of the container corner casting and the second employee's hand and fell striking the injured employee on the left eyebrow and causing a laceration. Afterwards, the employee lost consciousness and was hospitalized.",1
A delivery driver climbed into the back of a delivery truck to retrieve a hand truck. He slipped on ice/slush and fell off the back of the truck onto the hand truck. The employee fractured the left tibia/fibula and was hospitalized for surgery.,1
An employee was polishing a pipe with sandpaper. His right index finger was lodged in a hole in the pipe while it was turning and fractured. His finger was surgically amputated.,0
An employee was hospitalized for a broken ankle after slipping and falling on snow and ice in the parking lot.,1
An employee was rolling a patient onto their side to provide care.  The employee pulled the draw sheet to help assist the patient with rolling and heard a pop in their back.,1
"While conducting well servicing operations, an employee's right hand was caught on a spinning rod resulting in amputation of the right middle fingertip.",0
"An employee had just completed mixing the ingredients and was dumping the mix into a tote.  The tote was placed under the ribbon blender and the two discharge doors were opened. The blender pushes the product out the discharge doors and into the totes. Towards the end of this process, the employee noticed a small pile of product inside the discharge door. She attempted to knock it into the tote, at which time, the blender rotated around and caught her right hand between the edge of the discharge door and the blender. She sustained crushing injuries to the hand and severe lacerations to the hand and index finger.



An employee was cleaning a mixer in the grinding room and suffered a finger laceration.",1
"An employee was dismounting a stand-up forklift, lost his balance, and tripped catching his ankle between the forklift and a rack. The employee sustained two broken bones in his ankle and a laceration requiring stiches.",1
"An employee was operating the metal machine to make metal roofing panels when a piece of metal got stuck in the machine. As he attempted to remove the metal piece, the employee's left index finger was amputated.",0
An employee stepped off a powered pallet jack he was operating and the pallet jack coasted into him causing an open fracture on the right ankle. The employee was hospitalized.,1
"An employee was manually maneuvering a steel coil weighing 1,320 lbs. from the storage area to the forks of his forklift when the steel coil fell onto him. The employee was hospitalized for bruises and lacerations and leg fractures.",1
An employee stepped onto a dump truck to check the load. As he was climbing down his ring finger was caught on the steps and lacerated.,1
An employee was performing maintenance on a wind turbine generator. Their jacket was caught on a turning gear pulling his right arm into the gears and causing a crushing injury and laceration to the right arm.,1
An employee was attempting to grab a soil sample when he slipped and his left hand was caught in the chain and sprocket of drilling equipment. He suffered a small finger amputation and two broken fingers.,0
An employee was changing out a battery with another employee. They were lifting the battery out of a forklift with a battery changer when the battery changer hit the injured employee's ankle and broke it. The injured employee was hospitalized.,1
Two employees were going to install a new building service line on an existing power pole. One of the employees climbed the pole when the pole broke at its base and fell on top of the employee. The employee suffered three broken ribs and a partially collapsed lung.,1
"An inspector was at a private residence performing general job duties, slipped on snow and ice and fell breaking the left hip.",1
An employee was spreading pesticide around the perimeter of a customer's house and slipped on snow/ice. His foot got caught on a divot and his left leg twisted causing a fracture of the tibia and fibula.,1
An employee was fueling a tack distributor with gas when it suddenly caught fire on the burners. The employee received burns on his right hand.,1
"On January 29, 2019, three employees were connecting rail cars using a forklift. While connecting the cars, the injured employee noticed the coupler was closed and reached in to open it. His right hand was crushed between the two couplers resulting in surgical amputation of the index, middle and ring fingers.",1
"An employee was treating a patient when the employee tripped over a rolling machine and fell, suffering a left elbow fracture that required hospitalization and surgery.",1
An employee was using a chop saw and was lacerated between his left thumb and forefinger.,1
"An employee was installing a steel band to a pole when the band became loose and one side hit an energized conductor. An arc flash occurred, causing first degree burns to the employee's cheeks and neck and second degree burns to both ears.",1
"An employee was making a delivery, slipped on ice and fell onto a customer's driveway. The employee suffered a fractured left hip.",1
An employee was driving a dead forklift being pushed by a second forklift when the second forklift's forks slipped and hit the employee's foot. The employee was hospitalized due to crushed bones in the foot.,1
An employee was loading the rings into the furnace. The employee was steadying the load with one hand and operating the hoist with the other hand when the lifting device pinched the end of their left middle finger resulting in amputation of one-half inch.,0
An employee was operating a seated motorized pallet jack and struck a steel bollard causing a fracture to his left hip.,1
An employee was pouring drain cleaner from the manufacturer's bottle into a clogged floor drain when some of the solution splashed onto his face and into his left eye. He was hospitalized due to chemical burns.,1
An employee was bitten by a cat while restraining its legs for a vaccination. The bite became infected.,1
An employee was walking into another office when she tripped on a cord and hurt her left knee.,1
"On January 30, 2019, two employees were loading boxes into the baler. Once the boxes were loaded, the gate was lowered and one of the employee's fingers was caught in a pinch point resulting in the amputation of the left middle finger.",0
"An employee was working in a trench (3' 10"" deep by 6' wide) when the walls of the trench collapsed onto the employee's right leg, breaking it.",1
"An employee was inspecting a slitting machine after set-up by using his right hand to check the tension on the roll bar. His cut-resistant gloves became caught in the tooling ring and pulled his fingers into the rings, resulting in a right index finger amputation.",0
"An employee was found on the floor with a broken hip, requiring hospitalization.",1
"A trainee employee was connecting a propane hose to a cylinder tank when his hand hit the handle to open the valve. The propane hose came loose and the employee's jacket was soaked with the propane. The employee received propane burns on his left leg and ankle, his right wrist, and abdominal area.",1
"On January 30, 2019, an employee was making a delivery when the employee slipped and fell on black ice, fracturing the left elbow.",1
An employee was working outside on a dock in zero-degree weather when he experienced numbness in all fingers on both hands. He was hospitalized with frostbite to fingers on both hands.,1
An employee was checking tractors in the freight yard when he slipped on the snow and fell fracturing his ankle.,1
"An employee slipped and fell while exiting the cab of a roll-off truck, striking his face on the truck and dislocating his jaw.",1
An employee was disassembling a form tool when the form tool fell from an overhead crane and crushed the employee's left leg/foot. The employee's foot had to be medically amputated.,1
"An employee was doing maintenance on the bottom part of a two-piece die. He then tried to install the top die but it was rotating. As he tried to stop it from rotating, his finger was caught between the arm of the die and the track, resulting in a left middle fingertip amputation.",0
"An employee was stepping off the shuttle bus, lost her footing and fell fracturing the right ankle.",1
"On January 30, 2019, two employees were attempting to remove a nut from the bolt of a blow-out preventer (BOP) stack with a torque-n-test. The BOP stack was lifting 1-2"" with the pick up line connected to the block when the rigging shifted and came down on one of the employee's left index finger severing it at the second knuckle.",0
An employee was moving the backside of a unit load device (ULD) to push out a container from an aircraft while another employee was pushing a different container. The employee's left foot was then caught between the side rail and the ULD. The employee was hospitalized with a fractured left foot.,1
"An employee was loading steel parts into a bending machine when the intake roller on the bending machine grabbed his glove and pulled his left hand into the roller, resulting in an amputation to his left index finger.",1
"An employee was operating a hand held electric core drill to create a 2.5 inch hole through concrete to install refrigerant piping when the drill became bound in the concrete. It started to rotate, then threw him off the drill. The employee sustained a dislocated hip and was admitted to the hospital.",1
"On 01/30/2019, at 0855, an employee was moving luggage from a cart to a belt loader when he twisted and felt his knee pop. He sustained a dislocated knee and torn ligaments.",1
An employee was attempting to load a shaft onto a flatbed truck using an overhead crane. The pull chain got stuck in the hook on the chain fall. The employee reached up to free the pull chain and his right ring finger was pinched between the chain on the overhead crane and the chain fall resulting in a fingertip amputation.,1
"An employee was securing a load on a trailer, slipped off the trailer and fell to the ground breaking the right radius and ulna.",1
"On January 20, 2019, at approximately 10:30 PM, an employee was descending a rolling staircase after retrieving a vanity from a storage location, missed the bottom step and fell. The employee suffered a hip injury requiring surgery.",1
"While working behind a cash register, an employee tripped on a rubber mat and fell to the ground, suffering a fractured hip.",1
"An employee was directing a forklift operator from the top of a truck flatbed when the forklift pushed the trash box or skid pad, which caused the employee to fall from the flatbed to the ground. He suffered a fractured right arm.",1
"An employee was rotating pallets of product on a forklift when he tripped over racks in the distribution area and fell to the same level, injuring his pelvis and back. He was hospitalized.",1
On 1/30/2019 an employee was feeding a railing into a chop saw and amputated his right thumb half-way through the nail.,0
"An overnight team was stocking a store. A forklift driver was in the main lumber aisle and turned into a middle aisle to return to the receiving area, while the injured employee was standing nearby. The forklift driver ran over the tips of the injured employee's toes. He suffered two broken bones in his foot. Steel-toed boots were worn at the time of the incident.",1
An employee fell off a ladder and onto the ground while removing a car seat from the stock room storage. He fractured his pelvic bone.,1
An employee was attempting to secure material in the shear machine when the machine activated and amputated the left middle fingertip.,0
An employee was helping another employee guide a fuel line tubing through an idler wheel when the employee's finger was caught between the rotating wheel opening and a fixed frame. The employee suffered a partial fingertip amputation.,0
An employee was setting up a thermo-forming press and placing a shim while standing on a step stool. The employee slipped and inadvertently activated the press crushing his left thumb. He was hospitalized for surgery.,1
An employee was cleaning the egg processing machinery. The tool she was using to clean the machinery fell and her right hand contacted the rotating machinery resulting in amputation of the index fingertip.,0
"An employee was loading a coil in the metal stamping press when his left middle finger was caught in the machine, resulting in a partial amputation to his finger (distal portion).",0
"An employee was operating a punch press when his finger was caught in the press, resulting in an amputation to his left index finger.",0
"An employee was connecting a gooseneck trailer to a hitch when the employee's finger was caught and smashed between the trailer connector and hitch body, resulting in a surgical finger amputation.",1
"An employee was delivering mail on her route.  She stepped out of her vehicle onto the edge of the black top road surface. She was on the edge of the road and on uneven ground when she fell and attempted to brace herself with her left hand. As a result, she fractured her left wrist in multiple places. She stood up and immediately passed out. She was hospitalized and had surgery.",1
An employee was retrieving a patient's chart when the employee tripped over an open file cabinet and fractured a shoulder.,1
"An employee was tearing down a fence when the employee was hit on the head with a fence post, suffering a head injury.",1
An employee was taking plastic from a pallet jack wheel when the pallet jack amputated the employee's left middle finger.,0
"An employee was removing the ink from a printing press when her hand was pulled into the rollers, de-gloving her finger. Her fingertip had to be medically amputated.",1
"An employee slipped on a mushroom and tried to break his fall by grabbing a small slicer machine. His left hand fingers were crushed by the machine, resulting in one finger being amputated.",1
An employee was working on a machine that crushes brass shells when a part became congested. He was attempting to remove it when the machine's conveyor belt caught his shirt and then his right arm. He was hospitalized with a fractured right arm.,1
An employee was injured due to carbon monoxide exposure from a gas heater.,1
"An employee was filling a company vehicle with gas when her feet became entangled in the gas hose, causing her to fall and strike her right knee on the concrete. She sustained a fractured knee with a depressed bone, requiring hospitalization and surgery.",1
An employee suffered an incarcerated hernia while lifting a patient out of a shower stall.,1
"An employee was sweeping out the back of a trailer at a loading dock when the driver began to reposition the vehicle. The employee tried to exit the trailer onto the loading dock but missed and hit the ground, fracturing the right ankle, tibia, and fibula. The employee was hospitalized and had surgery.",1
"On January 31, 2019, an employee was struck by a motor vehicle in the employer parking lot while walking from the building to her car. She sustained left lower leg and ankle fractures.",1
"An employee was using a rag to clean rollers when the employee's glove became caught in the rollers, resulting in the amputation of two fingers. The rollers were unguarded at the time of the incident.",1
"Two employees were attempting to fix leaks in a gasoline tank. When they went to heat up the area of the leaks to braze them closed, the gasoline fumes ignited from a small bucket under the tank. The fire burned the injured employee's arms and back, requiring hospitalization.",1
"On January 31, 2019, an employee was opening a door while carrying a battery pack and a clipboard when he tried to catch the door and lost his balance. He then fell onto the floor and broke two ribs.",1
"An employee was loading an ATV using a winch when the employee's right thumb was caught in the winch, resulting in a partial thumb amputation.",0
"An employee was unloading a trailer full of packages with his co-workers while his left hand was resting on the rollers. His left ring finger was caught between the two rollers when his co-workers pushed back the roller section, resulting in the amputation of his left ring fingertip without bone loss.",0
"An employee was changing the fluid flow through piping when an expansion joint on a pump failed, allowing chemical to contact the employee. The employee was hospitalized with chemical burns to the hand and legs.",1
"An employee stood on a 2-foot square 4-inch high step to do a die change. The employee misstepped and fell to the floor, breaking the left hip. The employee was hospitalized for surgery.",1
An employee was conducting quality assurance on the packing line when a forklift ran over and crushed the employee's left foot.,1
"An employee was working on door railings for rollers to a trailer when he slipped off a 6-foot A-frame ladder and then fell on the trailer floor, hitting his ribs. He then fell back and hit his face on the concrete surface below. He was hospitalized with neck and back injuries, requiring surgery.",1
An employee was lifting a magnet to put down on a conveyor when the magnet dropped onto the conveyor. The employee's fingertip was amputated (from the nailbed up) between the magnet and conveyor belt.,0
An employee was operating a trash bucket and had raised the bucket to open the side trap doors in order to scrape out debris when the handle that raises/lowers the bucket was struck. The bucket then came down and struck the employee in the face. The employee sustained eye socket damage to the right side and a broken jaw.,1
"An employee was trying to put a cable back onto the pulley of a furnace door when his gloved left index finger was caught between the cable and the groove of the pulley. The cable tightened and the employee tried to pull his gloved hand out. At that time, the cable amputated his left index finger to the second knuckle.",0
"An employee was opening the rear door of his semi-trailer when pallets of freight fell down on top of him, fracturing his left-side pelvis and T-12 vertebra.",1
"An employee was using a grinding machine with a guard attached to grind on a bevel and prepare it for a welding seam. He was holding his tool with both hands when the grinding machine became stuck, kicked back, and cut the top of his left hand.",1
An employee was working on or near a machine when his hand was crushed between the machine's two rollers.,1
"An employee was carrying installation material up a ladder onto a slate tile roof when the employee slipped on the roof and fell 10 to 12 feet to the ground, breaking an ankle.",1
"An employee was unloading a box truck at a customer's home and was in the back of the trailer putting a thin plastic strap on the product to allow it to slide into the truck. The strap broke and the employee started to fall backwards. He tried to grab the door strap but fell out of the trailer onto the concrete ground on his back, suffering back and neck trauma.",1
"An employee was setting up foil wrap on a new wrap machine. He reached into his back pocket with his right hand while his left hand remained in contact with the machine. His left hand then slid and contacted the blades of the running machine, resulting in a partial left middle fingertip amputation. The blades were guarded at the time of the incident.",0
An employee was attempting to correct a rubber seal that had flipped upside down when a concrete panel shifted and crushed the employee's leg between it and another concrete panel. The employee suffered a left femur fracture and left knee laceration.,1
"An employee was running a vertical milling machine. During the milling process, he was brushing away particles (swarf) near the cutting surface when his glove became caught while the mill was still cutting. The machine then pulled the glove and his left pinky fingertip from his hand, amputating it to the first knuckle.",0
An employee was walking when a forklift pushed the employee down and drove over his left foot. He was hospitalized with fractures to his left foot.,1
"An employee was using the foot control while hand-feeding bed hook components into the point of operation on a 60-ton hydraulic press brake to emboss part numbers on each of the components. The employee's right index finger was in between the upper and lower dies when they came together, resulting in the partial amputation of the index fingertip.",0
"An employee was delivering a pallet of forging material to a vendor. When he opened the rear door of the delivery truck, one piece of material weighing 456 pounds fell off the pallet and landed on him, bruising his arm.",1
"An employee was inspecting a recirculation piping system when the rubber connector failed, releasing hot water onto the employee. The employee was hospitalized for burn injuries.",1
"A dump truck tailgate was elevated, wedged, and would not work correctly. An employee tried to free the tailgate by removing a clump of clay when the tailgate came down and pinched his left middle and ring fingers, amputating them below the nail.",1
An employee was attaching rigging gear to steel joists during crane operations. When the load was lifted his foot was entangled in the tagline and the employee was lifted to a height of approximately eight feet. The employee freed himself and dropped to the ground fracturing his pelvis.,1
"An employee tripped on a power cord while hanging drywall and fell down the stairs. The employee was hospitalized with back, neck, and rib injuries, as well as fractures to both wrists.",1
"An employee working on a milling machine was replacing a chip transfer tube when his right index finger contacted the milling head, resulting in a finger amputation.",0
"An employee was supervising as contractors erected a work-over rig on a drill site. As the floor of the work-over rig was being hoisted, a cable snapped, causing the floor to fall. When the floor struck the ground, it ejected the centerpiece of the floor, which struck the employee. The employee lost consciousness and was hospitalized.",1
An employee was cutting meat with a band saw and amputated his left thumb tip.,0
An employee was sanding a steel shaft on a lathe and performing maintenance when their glove was caught by the shaft pulling his right hand into the shaft and amputating the middle finger at the first joint below the finger nail.,0
An employee fell off an application spreader rig while washing a window and struck the ground. The employee was hospitalized with a fractured cheek bone.,1
"An employee was preparing to put a harrow on a tractor in order to clear ice off of the racetrack, when the employee slipped and fell on the ice sustaining multiple rib fractures.",1
"An employee picked up material from a lower shelf, got back up, turned around, and lost balance and fell. The employee suffered a broken elbow.",1
"A press crew was webbing up the press. A press operator was standing in the folder area when the ribbon started to crinkle. The operator was fixing the ribbon while the press was inching and his left index finger was pulled in by the diverter plate, amputating his left index fingertip.",0
An employee was troubleshooting a paving machine. He was cleaning the grease on the sprocket using a rag wrapped around his finger. The sprocket was running at the time and caught his hand and amputated the left middle finger.,1
An employee was stepping out of a truck when he slipped and fell off the steps and broke his femur.,1
An employee was loading a cardboard baler and caught their left middle finger between the baler and the cardboard resulting in a partial amputation of the finger.,0
"On February 1, 2019, at approximately 4:45 a.m., an employee was feeding sheet plastic into an extruder-winder when his arm became caught in the machine. He sustained a fractured right arm requiring surgery.",1
"As a forklift operator pulled onto a trailer, the trailer pulled away. The operator and forklift fell to the ground (42""), injuring the employee's back.",1
"An employee was climbing down from the roof using a fixed ladder. About five feet from the ground, the employee lost footing and fell landing on his left hip. The employee sustained a hip injury requiring a pin and a sprained left wrist.",1
A machinist was setting up the inserting machine and his hand got caught on a clip causing injury to the hand that required surgery.,1
An employee had just started his shift in the pullet house and noticed a pullet chick caught in the feed chain end wheel. He attempted to retrieve it and his finger was caught in the chain and sprocket resulting in partial amputation of the right ring finger.,0
An employee was lifting a metal coil wrap. The coil fell off a cart and struck his left leg and foot. The employee sustained amputation of the left leg.,1
An employee was reattaching a trailer hitch. The trailer dropped and crushed his hand resulting in the amputation to the knuckle of one finger and another fingertip amputation.,1
"An employee was rolling casing down a pipe rack. The employee's thumbs were in a pipe when it fell off the rack, resulting in the amputation of both thumbs.",1
"A maintenance employee was pulling on a belt while clearing a labeling jam. When it became free, it caught his fingers in the conveyor belt, amputating the end of his pinky finger and fracturing his ring finger.",1
An employee was loading fiberglass into a mold that was suspended from a hoist. The chain broke on the mold and it knocked the employee down. The employee was hospitalized with broken ribs and a broken pelvis.,1
An employee was driving a stand-up forklift out of a trailer when the truck pulled away. The forklift fell to the ground causing contusions to the employee's face and crushing injuries to the employee's leg that required surgery.,1
"While clearing a machine jam, an employee suffered finger lacerations.",1
An employee was working on a catwalk when he slipped on ice and fell onto his side. He was hospitalized with a broken left hip.,1
"An employee was working underneath a motor home installing a steering control when the motor home fell on him, crushing his pelvis, spine, and tailbone.",1
"An employee was performing maintenance on a roof top unit and was either ascending or descending the roof hatch ladder when he lost his footing and fell to the concrete floor. The employee sustained broken eye sockets, a concussion, a fractured knee and internal bleeding.",1
"While unloading a fork attachment for a front-end loader, an employee's finger became caught between a fork and the fork plate resulting in a partial amputation to the right middle finger.",0
An employee tripped and fell and sustained a broken arm and leg.,1
"As an employee was climbing down from a ladder, the ladder began to slide and move. The employee fell approximately 10 feet to the ground below and sustained two fractured ribs, a broken radial bone on the left arm, and a broken left wrist.",1
"The injured employee was outside the building talking to another employee. As the injured employee went to lean back on the railing, he fell onto his left side and suffered a broken hip.",1
An employee was driving a pallet jack down an aisle when it turned and pinned him to a rack resulting in a fractured leg/ankle.,1
"An employee was cutting brush and trees. He stepped onto a tree stump, slipped and landed on a branch or small tree that caused a puncture wound requiring hospitalization.",1
"An employee was traveling down a road on a four-wheeler. While he was avoiding an oncoming semi truck, the four-wheeler rolled over and landed on top of him. He suffered a broken leg and wrist.",1
An employee was visiting a residence when they slipped and fell in the driveway sustaining a fractured ankle.,1
"An employee was loading a lift onto a trailer. As the employee attempted to drive past the hinge point, the lift lost traction and slid off the back of the elevated beaver tail ramp. The employee's chest struck the operator control panel breaking ribs and his sternum.",1
"An employee had been loading furniture into a customer's rented box truck.  As the employee stepped down from the truck, they felt a pull/pain in the pelvic region.",1
"An employee was standing on a pipe trailer to disconnect cabling from a pipe that had just been loaded. While reaching to disconnect the cabling, the employee lost footing and fell 7 to 8 feet from the trailer to the ground. The employee landed on the right hip, causing fractured vertebrae in the lower back. The employee was hospitalized.",1
An employee was shutting the dock door and her right foot became tangled in the rope used to close the door causing her to lose balance and fall to the floor. The employee sustained a fractured right tibia and fibula.,1
"An employee was standing on a drilling rig when a piece of guarding fell from the tower and struck the employee's head, causing a contusion to the left eye, a laceration to the cranium, and fractures to cervical vertebrae and the left scapula.",1
The injured employee was talking to another employee as corrugated sheets were being fed into a press brake on the back side. The injured employee placed his left hand under the die and the press was activated resulting in amputation of the left hand.,1
An employee was operating a pallet jack when her foot was caught between a pallet and the jack resulting in a fractured ankle.,1
An employee was cutting meat with a band saw when his right hand slipped against the blade resulting in partial amputation of the right pinky finger.,1
An employee was struck by a motorist while installing a temporary traffic control pre-warning sign. The employee sustained a fractured pelvis and a ruptured bladder.,1
"On February 1, 2019, around 11:00 a.m., an employee was troubleshooting a unit at the mill. He was removing the wet coal from the feeder wheel using a three-foot flat steel bar and the bar got caught in the rotating wheel. The employee attempted to pull the bar out and pinched his right middle finger between the bar and the inspection port housing resulting in a laceration and broken bone that required surgery to repair. It later required surgical amputation.",1
An employee was walking behind a telehandler all-terrain forklift when the forklift ran over the employee and crushed both legs.,1
"Sometime between 8:00 and 9:00 AM, on 02/02/2019, an employee was walking behind a telehandler when it struck him and his legs were crushed.",1
An employee was troubleshooting a machine when the machine's gears amputated three fingers.,1
"An employee was carrying laundry down to the basement when the stair railing gave way and she fell down 12 steps. She was hospitalized with a subdural hematoma, fractured left thumb, contused forehead, compression fracture to the C7 vertebra, fractured right humerus, abrasion to the buttock, and contused right thigh.",1
"On February 2, 2019, an employee's fingers and thumb tip were amputated while operating a radial saw.",0
On 02/02/2019 a ski instructor was manning the finish line of a race when he was struck by a racer. He was hospitalized with lacerations to the thigh.,1
"An employee had jacked up a car to change the front driver's side tire. While loosening the rim from the rotor, the car fell off the jack and struck the employee. The employee sustained fractures to the left shoulder and head.",1
An employee fell off a stool and sustained a right eye socket fracture.,1
"An employee was working with a patient who became combative and tried to lock her out of a room. The employee's finger was pinched in the door jamb, and the tip was amputated.",0
An employee was working from a mobile scaffold and vacuuming the ceiling in order to prepare it for paint. The employee fell approximately 15-18 feet to the concrete floor and suffered a head injury.,1
"An employee was overcome by the smell from a kitchen and vomited, becoming dehydrated. The employee was hospitalized.",1
There was a fire in the foam department. An employee knocked over a bucket of acetone which splashed onto his clothes. The clothes ignited and the employee was burned.,1
An employee was cleaning out glass fibers in a small channel that houses a cutting blade on a cutting machine and suffered a fingertip amputation.,0
"An employee was walking to her vehicle, slipped or tripped and fell in the parking lot breaking a hip. The injury required surgery to repair.",1
"On February 4, 2019, an employee's right index finger was caught in a pipe bending or tube bending machine and partially amputated.",1
"An employee was blowing down a vessel through a stinger pipe that was pointing up. As he reached with his right hand and opened the ball valve to release pressure, the stinger pipe swung to the left and struck his left elbow, causing multiple fractures.",1
An employee was pulling pipe from a hole using a drill machine. A weld broke and the pipe struck the employee's face breaking the right cheek bone.,1
"An employee had been driving in the middle of a bad snowstorm when he was notified to go home. He walked over to the passenger side of the truck, climbed up the side to grab his belongings, slipped, and fell to the ground, landing on and breaking his left ankle. He was hospitalized and had surgery.",1
"An employee was walking toward the locker room when he slipped and fell on his right side, twisting his leg and resulting in a fracture.",1
An employee was performing maintenance on a docked ship. The employee was descending a ladder and then stepped off the ladder and then fell 6 feet off a mezzanine. The employee was hospitalized with a fractured lower left leg.,1
"An employee was helping to fabricate a new catwalk when a metal burr went through the employee's glove and into the palm of his right hand, leaving a sliver. He removed the sliver, but the next day his hand and arm became swollen due to an infection. He was hospitalized and required surgery.",1
An employee was walking to his car in the company parking lot and fell. The employee suffered a possible concussion and loss of teeth.,1
An employee was performing evening kennel rounds and walking dogs. The employee was knocked down to the concrete floor by a dog and suffered a broken hip.,1
An employee slipped and fell on ice in the parking lot and was hospitalized with a broken ankle.,1
"An employee was repairing the overhead dry and shine automatic towel dryer of the car wash when it fell onto the employee. The employee sustained severe head and facial fractures and lacerations including a broken jaw and teeth. 

The employee was hospitalized.",1
An employee was walking into the store and was struck by a car. The employee suffered a head injury.,1
"An employee was opening a 15' wide by 20' tall manual overhead door using the pull chain. While using the pull chain to the pulley and sprocket, a spring mechanism fell and struck him on the head. The employee was hospitalized with a fractured skull and a cracked C1 vertebrae.",1
An employee operating a forklift in reverse when their left leg was caught between the stand up tow motor and the racking system resulting in a fractured left tibia.,1
"An employee was servicing a pump and was struck by a 10 or 12-inch pressure hose that blew off piping at an adjacent job site. The employee sustained fractured ribs, a broken collar bone and a back injury.",1
An employee was cutting plywood/particle board on a table saw. The board jumped causing the employee's right hand to slip into the blade resulting in amputation of the thumb tip.,0
"A material handler from Remedy Intelligent Staffing was using a forklift to load 95-pound rectangular tubing (4 feet long, 4 inches high, and 6 inches wide) onto a cantilever rack. He got off of the forklift to push the metal tubes onto the rack when one of the tubes fell between the cantilever arms and his right middle finger, causing the amputation of the fingertip.",0
"An employee was unloading countertops from a pallet. After the banding was cut, some of the countertops slid off the pallet and hit the employee's left foot, causing a broken left ankle. The employee was hospitalized, requiring surgery.",1
"An employee was lifting a part with a hoist. As the part was being elevated, the employee's finger was caught between two parts causing a fingertip amputation.",0
An employee was inside a crane positioned on top of a sink hole when the crane tipped over. The employee jumped out of the cab and suffered a hairline fracture to his right leg.,1
An employee was accessing a roof hatch from a fixed ladder and fell approximately 15 feet to the ground. One ankle was broken and the other ankle was injured.,1
An employee was cutting paper with a paper cutter when the cutter slipped and amputated the employee's left thumb tip.,1
"An employee was taping/finishing drywall when he miss-stepped and fell, breaking his wrist.",1
"On February 4, 2019, an employee was removing a sheet of aluminum from a pile of aluminum (~ 4 feet x 10 feet) when the aluminum sheets fell on the employee. The employee was pushed into a rack and pinned. Both legs were broken just under the knee caps.",1
An employee was troubleshooting an insulation saw and caught their left ring finger in the belt and pulley. The fingertip was amputated including most of the fingernail area.,1
An employee was struck in the abdomen by a skid steer.,1
"An employee was felling a tree. Part of a tree that was leaning on the tree the employee was felling fell onto the employee causing a concussion, cracked vertebrae, a cracked rib, broken teeth and a broken femur.",1
"An employee was operating a table saw when his left hand contacted the blade, cutting his hand and fingers. He was hospitalized.",1
"An employee was walking to their vehicle, slipped on ice and fell hitting their head. The employee sustained a concussion.",1
"An employee was using the dock ramp at the facility where he was delivering product when drinks fell under the ramp. When the employee attempted to retrieve them, the ramp moved and pinched his finger causing a fingertip amputation.",0
An employee was operating a forklift to move reinforcing steel spirals and backed into a parked flatbed trailer. As the employee tried to free the forklift from the trailer his left hand was crushed between the forklift and the trailer. The employee's hand was fractured and lacerated and the employee was hospitalized.,1
An employee suffered a fingernail avulsion as he was checking a cable he had replaced on a golf cart.,1
"On February 5, 2019, an employee was operating a cutter machine to cut hooks when a hook became jammed inside the cutter. She stopped the machine on the control panel and attempted to remove the jammed hook. As she was unjamming the machine, the control panel was reactivated and the cutting blade contacted her finger, resulting in a fingertip amputation.",0
An employee was servicing a fan belt and pulley when the belt shifted and amputated the employee's right index and middle fingertips.,0
"An employee was helping to unload metal sheet panels from a truck. A panel sat on a piece of wood and the wood broke crushing the employee's right pinky, ring and middle fingers.",1
An employee was walking when her pant leg became caught on a tote and she fell to the floor. She required surgery for a dislocated shoulder.,1
An employee slipped on an icy sidewalk while delivering mail and fractured the right ankle.,1
"An employee was using a chain hoist to position a pipe to be welded when the chain caught a valve on the existing pipe and opened the valve, releasing hot water on the employee. He suffered burns to the right arm (from his forearm to his bicep) and right torso (from the ribs to the stomach).",1
"An employee was working to repair an 1,800-pound tubing guide. When the employee disassembled a bolt on one side, the gooseneck tipped over, partially pinning and striking the employee's lower right leg. The employee suffered a fractured lower right leg.",1
"An employee came down from a two-step stepstool and fell, injuring her knee on the floor.",1
"The employee was riding a horse, sorting cattle. Due to ice and mud, the horse slipped and fell on top of employee's left leg and shoulder. The employee suffered a rotator cuff dislocation of the left shoulder and a muscle injury to the left leg.",1
"An employee fell from a ladder and fractured the left ankle, requiring surgery.",1
"An employee was hooking up a trailer onto a pickup truck when he stepped on a pygmy rattlesnake, which bit him on his right shin. He was hospitalized.",1
An employee was observing the closing of the coker drum. Their right index finger was pinched when the coker drum closed causing a fingertip amputation.,1
"An employee was putting pipe stoppers into a casing block and then onto a pipe rack when one of the casings came loose and rolled onto his right hand, smashing it and requiring hospitalization. The casing was 36 feet long and weighed 20 pounds per foot.",1
An employee was walking alongside a walkie rider pallet jack when the pallet jack turned and struck the employee's left leg resulting in an ankle fracture.,1
"An employee was stepping off a reach lift truck when the employee's foot was caught between the truck and a post, fracturing the foot and requiring hospitalization. The lift truck had not come to a complete stop at the time of the incident.",1
"An employee was feeding wire into a drawing machine when the wire caught the employee's left hand, resulting in the amputation of the employee's middle and ring fingertips.",0
"Two employees were removing a skid strapped to the wall of a trailer. One employee cut the strap while the other employee held the skid. The skid fell onto the injured employee after the retaining strap was removed, resulting in leg fracture.",1
"An employee was driving a forklift down an aisle when it slid into a rack. The rack entered the forklift compartment and broke his left foot, requiring hospitalization.",1
"An employee was walking down the stairs, tripped and fell hitting her head on the door at the bottom of the stairs. The employee sustained a laceration under her left eye and a head injury.",1
"An employee was going down the stairs when she fell and broke her ankle, requiring hospitalization.",1
"An employee was working from a ladder to remove ductwork from the ceiling. He snipped a hanger on one end at the joint and the duct joint gave way, causing the ductwork to drop at one end and swing back, striking the ladder at the base. This knocked the ladder out from under him, and he fell to the floor, landing on his hands and knees at an angle. He broke his arm, fractured his elbow, and hurt his knee.",1
"An employee was carrying a 10-pound box of aluminum  parts when he fell backwards to the concrete floor. He struck his tailbone and then his head, suffering a fracture to the tailbone and a laceration to the head.",1
"On February 5, 2019, an employee's middle and ring finger tips were amputated while retrieving a part from a stamping press.",1
An employee was stomping on boxes to break them down when she fell to the floor and broke both wrists.,1
"An employee was carrying a box up on a track ladder when she lost her balance and fell to the concrete floor, fracturing her right hip and requiring hospitalization.",1
An employee was pulling a rope out of a tree and fell backwards onto the ground fracturing his ankle.,1
An employee slipped on ice in the parking lot and fell. The employee was hospitalized with a hip fracture.,1
A maintenance employee was making adjustments to the measurements on a tube laser. The employee was inside the inter-lock doors when the machine started up. The employee was struck in the torso by the machine arm and suffered ruptured intestines and internal bleeding.,1
"The employee was assisting to load parts onto a sorting table. An attachment to the forklift tub is filled with parts that are dumped on the sorting table. The forklift operator had just rolled over half a tub onto the sorting table. When the employee was removing a rollover bar from the bin, it broke free and came out of the bin. The tub shifted on the forklift forks and fell over landing on the employee's shoulder, ribs and hip area. The employee sustained three broken ribs and a lumbar hernia.",1
An employee was pushing steel scrap with one hand into a container when a finger was pinched between a piece of scrap metal and the edge of a metal bar railing amputating the fingertip. The employee was wearing gloves at the time.,1
"An employee was throwing debris into a dumpster. As the employee was throwing a pole into the dumpster, it bounced back and struck his left arm fracturing it.",1
"An employee left his vehicle and was walking to the office when he slipped on ice and fell. He was hospitalized with a dislocated and broken elbow, requiring surgery.",1
"An employee was activating a coding machine when its chain and sprocket caught his right hand, resulting in the amputation of the distal joint of his right middle finger.",0
"An employee was using a 9-step ladder to pack down dryer ducts. As she was descending the ladder, she missed the bottom step and fell, breaking her ankle.",1
"An employee was helping tear up an old carpet when he received a minor cut on his left hand between the thumb and the index finger. He was hospitalized the next morning, suffering from blood poisoning.",1
"An employee was using shears when his hand got close to the shears, resulting in a finger amputation.",0
An employee was moving equipment and caught their leg between the equipment and a wall.,1
An employee was lubricating the towel folder and got his right hand caught between the chain and sprocket resulting in a laceration that required surgery.,1
"On February 5, 2019, an employee fell to the ground while exiting or entering his vehicle in a parking lot. He suffered broken bones in his leg/ankle.",1
"An employee was working on an exhaust fan from an A-frame ladder. As the employee was attempting to pry the exhaust fan, the ladder twisted and the employee fell approximately 8 feet. The employee suffered a concussion and back injuries.",1
"An employee was descending a jobsite-made ladder when he slipped and fell, breaking his right ankle.",1
"On February 5, 2019, at approximately 12:10 a.m., a housekeeping employee was walking in the facility parking lot to their vehicle when the employee slipped on ice and fell, fracturing the right hip.",1
A maintenance technician was using a pallet jack to move blast doors when his right middle finger was caught in the pinch point created by the moving pallet jack handle resulting in a partial amputation of the finger.,0
"An employee was preparing a line for maintenance work. The line contained a combination of propane and hydrofluoric acid. He was hooking up the hose to the valve to put a vacuum on the line and pull out the remaining chemicals. Before he could place the hose on the valve, residual chemicals came out and splashed his legs, causing skin burns. He was hospitalized.",1
An employee suffered a fractured right fibula while uninstalling recording equipment from a military vehicle.,1
"When a machine cycled, the tongs inside it whiplashed and struck an employee on the right side, by the ribcage.",1
"An employee was reversing a forklift truck down an inclined and elevated driveway when the forklift fell upright off the elevated driveway, which was approximately 16 inches above level ground. The employee's right hand was crushed between the cab of the forklift and a guardrail post, breaking the right middle finger and tearing tendons.",1
"An employee was standing near a winch truck that was being used to pull out a workover rig that was stuck in the mud. The winch cable was hooked to a cross member on the rig. The winch truck driver attempted to pull on the rig and the cross member welding broke. The cross member swung around and struck the employee's chest. The employee suffered fractured ribs, a collapsed lung, and a ruptured spleen.",1
"An employee was removing a storefront sign using an 8-foot step ladder. While descending the ladder, the employee slipped and fell backwards, hitting the sidewalk with the back of his head. The employee was hospitalized.",1
"On February 6, 2019, an employee was loading a jack into a manual press and attempting to secure it when the jack leg fell and struck the back of his head. He suffered a concussion.",1
An employee was run over by a forklift resulting in severe leg injuries.,1
"Employees were terminating cables at a job site. The electrical room was locked out and all grounds were applied. 
The employees had finished the task and were grabbing their tools.  As they were walking out, an arc flash occurred and caused burns to the injured employee's right hand and face.",1
An employee was performing maintenance repairs on a packing machine when the vertical clamping mechanism activated and partially amputated his right thumb. The safety guard was disengaged at the time of the incident.,0
"An employee fell from a ladder to the ground, suffering a collapsed lung.",1
"An employee was working with a heavy motor when the employee slipped. The employee's hand was then caught in a bolt hole, resulting in a partial phalangeal amputation to the left middle finger.",0
"While accessing an electrical junction box, an employee suffered burns and lacerations to the left- and right-hand fingertips.",1
"An employee slipped on an icy exterior sidewalk and fell to the ground, breaking the right hip.",1
"An employee was walking in a crosswalk between the building and parking lot when the employee was struck by a moving private vehicle. The employee suffered a spinal fracture, L2 process fracture, facial and arm lacerations, and a concussion.",1
"An employee bent over to pick up a part off the floor and felt a pull in the lower back.  When he stood up, he felt a lot of pain. He was hospitalized with two bulging discs.",1
"An employee slipped on ice while stepping out of her car, suffering a fracture and a torn ligament in the right foot.",1
"At about 6:50 p.m. on February 6, 2019, an employee was on top of a generator enclosure, getting ready to clean it in preparation for painting. He fell through a 4-foot by 7-foot opening whose plywood cover slid, landing on the concrete floor about 12 feet below and fracturing both heels. He was hospitalized.",1
An employee suffered a left middle fingertip amputation while operating a production machine. The machine was guarded at the time of the incident.,1
"An employee slipped and fell on ice in the company parking lot while walking into the office. She hit her head, suffering a subdural hematoma and a concussion.",1
"An employee was loosening nuts and bolts on the engine of a drill rig when his finger was caught between a drive belt and pulley, resulting in a fingertip amputation.",0
"An employee was monitoring a dipping operation through an observation window on the closed door of a hot dip galvanizing kettle. Zinc spattered from the kettle, entering the top of the employee's boot and causing a third-degree burn to his left heel. Personal protective equipment was being worn at the time of the incident, but pants were tucked into boots.",1
An employee was trying un-stop a conditioner on an extruder with a shovel when the shovel became caught in the machine and pushed his thumb against the conditioner housing. The tip of his right thumb was amputated between the nail and knuckle.,0
"An employee was operating a forklift to move product inside a warehouse when the forklift struck a support pole. The employee then fell to the concrete floor while exiting the forklift, fracturing his left femur.",1
"An employee was trying to close the trailer door at a dock. The dock plate was not operating correctly. When the dock plate released, it caught the employee's right middle finger, amputating the fingertip.",0
"At about 8:45 p.m. on February 6, 2019, an employee was operating a blow bagger. The employee noticed that the blender, which is operated in close proximity to the bagger, no longer had material flowing from the valve. The employee was investigating this issue and amputated his left hand in the rotating blade in the valve.",1
"An employee was modifying a weaving machine to run a new type of fiberglass product. A bolt dropped before the machine's guards had been replaced; as the employee was retrieving it, his right hand was caught in the belt and pulley system and his right middle fingertip was amputated.",0
"An employee was lifting the gate on a cargo truck. The lift gate became stuck, so the employee attempted to loosen it. The gate jolted, and his middle finger was caught between the gate and truck, resulting in a fingertip amputation.",1
"An employee was feeding fig bars onto a line/conveyor belt. The employee was walking along the conveyor belt line to address a jam when the employee tripped on the leg of a chair and fell to the ground, fracturing an ankle.",1
"An employee was part of a team unloading material from a truck. The employee was waiting for the forklift to pick up the next crate when the crates fell over due to a gust of wind. The fallen crates (weighing approximately 1,500 pounds) pinned the employee's leg to the truck bed. He was hospitalized with a broken right leg and required surgery.",1
"An employee was attempting to spin the wheel on a car when his finger was caught between the caliper and the wheel, resulting in a right middle finger amputation.",0
An employee was aligning a pipe. The steel pipe slipped and struck the employee's left leg and fractured the tibia and fibula.,1
"An employee was core drilling concrete when the drill bit became stuck, causing the drill to spin out from underneath the employee's feet. The employee then suffered a fractured femur.",1
An employee was cutting wood on a table saw. The piece of wood kicked back and his hand came into contact with the saw blade. He suffered amputations to the middle and index fingers of his left hand.,0
"An employee was walking in the kitchen when her foot was caught on a drain, causing her to slip and fall. She fractured her left femur.",1
"An employee was removing a piece of cardboard that was on top of a pallet and underneath a spring hanger when the spring hanger shifted, causing his left ring finger to be caught between two spring hanger parts. His left middle fingertip was amputated with bone loss. Cut-resistant gloves were not worn at the time of the incident.",0
"After a manifold trailer had been pressure-tested to 3,000 psi, a Renegade employee bled it off to 1,200 psi. The accumulator broke and struck the employee's face under pressure, causing lacerations inside and outside the mouth. The employee was hospitalized.",1
"An employee was helping to move a power pole. The aerial crane carrying the pole made contact with 7,200-volt power lines, and the employee suffered first and second degree electrical burns to the right foot.",1
An employee slipped on ice while walking between a vehicle and a patient's home. The employee was hospitalized with a fractured kneecap.,1
An employee received a shock and subsequently dislocated his shoulder. Two other employees were investigating why the employee was shocked when an arc flash occurred and the two employees were burned; one employee was hospitalized due to second degree burns.,1
"An employee was working on a vertical lathe when a part became dislodged during the machining process and struck the lathe door, which then pushed the employee. He lost his balance and fell to the ground, breaking a leg.",1
"While on a ladder picking oranges, an employee came into contact with a power line and suffered electrical burns.",1
"On February 7, 2019, a dump truck an employee was driving broke down and was placed on a flatbed. The dump truck driver climbed onto the flatbed and inside the truck cab to retrieve his lunch box and upon climbing down he fell to the ground below and struck his head. The employee was hospitalized for a head laceration requiring stitches.",1
"An employee was torch-cutting a flatbed railcar when he was showered with sparks and pieces of slag that penetrated his flame-resistant coat, causing severe burns to his left-side abdomen.",1
An employee was performing maintenance on a plastic compression molding machine and suffered the partial amputation of the right thumb. The machine was not guarded or locked-out at the time.,0
An employee was working in the warehouse when a pallet of cauliflower fell from a shelving unit onto the employee's head.,1
"On 2/7/19, an employee was exiting the building to go to her vehicle when the wind blew the papers in her hand. She went to reach for them and lost her balance, tripped, and fell to the ground, fracturing her left wrist.",1
"An employee was standing on the top of concrete forms, which were part of the setup for the basement walls of a new house under construction. The employee was directing the flow of concrete into the forms. The hose from the concrete pumper truck moved unexpectedly as a result of a clog in the hose and knocked the employee to the ground in the interior of the basement. The employee suffered minor vertebrae fractures.",1
"On February 7, 2019, at 3:16 p.m., an employee slipped and fell on the sidewalk while walking to the employee's vehicle. The employee sustained a hip injury.",1
"An employee was standing on the second floor balcony of a multistory home at a construction site. The employee was leaning over the rail, lost his balance, and fell to the concrete floor below. The employee sustained a fractured ankle and a bruised right shoulder.",1
"An employee was changing a belt on a machine that had been locked out when the employee's hand slipped and was caught between the belt and pulley, resulting in a right pinky finger amputation.",0
"A crew was using a crane to lift a section of sheet piling with a chain and clamp lifting device. While the injured employee was guiding the load with a guide line, the clamp malfunctioned and released the load. The sheet pile fell to the ground and over striking the injured employee causing him to fall to the ground resulting in a dislocated hip, a laceration to the eye, and a fractured jaw bone.",1
"On February 7, 2019, an employee was operating a hoist controller to remove chain slack during hook storage. The employee's left hand held the hoist chain in place while the hook was secured to an I-beam. The employee attached the hoist hook to the storage bar and tightened the slack so the hook would not swing. While tightening the slack, the employee's left little finger was caught between the hoist chain and the I-beam, resulting in a fingertip amputation.",1
"An employee was walking on top of rebar reinforcement that was part of a new bridge construction site to measure a bid well motor.  As he moved from one location to another, he tripped, fell and fractured the left wrist. 

The employee was transported to the hospitalized for  surgery.",1
A sheave cable fell from the rig and struck an employee's hand causing a fracture that required hospitalization.,1
"An employee was changing out the insulator on a buswork at a substation. An energized lightning arrester shocked the employee, causing burns to the left hand. The employee was hospitalized.",1
"A spotter truck driver fell after opening a trailer door in a parking lot. He broke his left wrist and was hospitalized, requiring surgery.",1
"An employee was working to remove the side forms from a 72"" bulb tee line. He was unhooking the forms from a jack using lifting devices and steel pins. As he pulled the pin from the lifting device with his right hand, he attempted to push the pin with his left hand. His left index finger then entered the hole on the form brackets. The jack operator then lifted the device from the form, catching the employee's left index finger in the hole on the bracket. He suffered a left index fingertip amputation just below the first joint.",0
"On 2/07/2019, an employee was carrying two bulletin boards out an exit door when the employee tripped and fell on a mat outside the door. The employee fell to the concrete and fractured the left hip.",1
"An employee was on a roof, putting material near a chimney for work later that day. He slipped and fell off the roof, injuring his left lower leg above the ankle. He was hospitalized.",1
"While loading orders from a warehouse, an employee was caught between a stand-up tugger and a 5-S board. The employee's right femur was broken.",1
"While cleaning a pool cover, an employee slipped and fell twice, suffering a back injury. The employee was hospitalized.",1
"An employee was removing ice from the ropes used to pull power lines through a traveler. The grip broke and the rope pulling the cable through the roller pulled the employee's right hand into the traveler, breaking some bones and tearing the carpal tunnel ligament.",1
"An employee slipped on ice and fell to the concrete sidewalk, breaking his left kneecap and fibula.",1
"An employee was cutting a piece of trim when it kicked back. His hand came into contact with the saw blade, causing an amputation to his left thumb.",0
"A gust of wind blew a fence onto an employee, injuring his back.",1
"While building furniture, an employee suffered a smashed finger. The finger became infected, and the employee was hospitalized.",1
An employee felt faint so she grabbed racking. She fell over and hit her head on the shelving or ground.,1
"An employee was climbing an 8-foot A-frame ladder to work on bolted ceiling blocks. He slipped and fell from the ladder to the floor, breaking his wrist and suffering a brain hematoma.",1
"An employee was picking up a man lift from a job site. He was operating the lift inside the man basket and driving it up onto his truck. About halfway up the truck's ramp, the lift lost traction, slid off the ramp, and tipped over. The employee was tied off inside the basket and the fall was approximately 3 to 4 feet to the pavement. He suffered a fractured left femur and dislocated right shoulder, requiring hospitalization and surgery.",1
"On February 7, 2019, an employee was operating an egg flat washing machine. The employee was attempting to unload the washed egg flats when the employee's left middle finger was caught in a chain driven by a sprocket that moved the egg flats along the conveyor through the machine. The employee suffered a left middle finger amputation.",0
"A service technician was working on a rooftop heating/AC unit. The technician slipped on ice and snow and fell from the roof to the ground, suffering a crushed vertebra in the lower back.",1
"An employee was standing on top of a 10-foot ladder platform, prying loose a form panel, when the panel fell and struck the foot of the ladder. The employee fell from the ladder and suffered a dislocated right wrist and fractured finger.",1
"An employee slipped on ice in a parking lot and fell, breaking his left ankle.",1
"An employee was splashed in the face with sodium hydroxide while repairing a transfer pump, suffering chemical burns to the face.",1
"An employee fell while tracking individuals, breaking the left fibula and tearing ligaments.",1
"An employee fell to the floor while working at a cash register, suffering a broken hip.",1
"An employee was forming parts on a press brake. While he was pulling out a part, the machine activated and smashed his left ring and middle fingertips, causing amputation injuries.",0
"On 02/07/19, at approximately 11:45 AM, an employee lost control of a forklift. She attempted to brace herself with her left hand, which struck a desk and was lacerated.",1
"An employee was working in a walk-in freezer, unloading boxes onto a cart, when a box of muffins fell on her head. She was hospitalized with a concussion.",1
An employee was repairing a forklift when a fork fell and injured the employee's right leg.,1
An employee was retracting a truck-mounted winch cable when his right index finger was caught between the cable and a lever. The fingertip was amputated.,0
An employee was organizing flattened boxes by picking them up and stacking them on the floor. She picked up a few boxes and began to walk to the other side when she tripped over a plastic packaging strap that was laying on the floor and broke her left arm.,1
An employee was lifting a steel screen on a vertical boring machine. The screen got caught on a fixture and the employee's hands were caught between the screen and a rail. The employee suffered a fractured left hand and a fractured right thumb. The employee's right index and middle fingers were amputated.,1
An employee was stepping over branches lying on a sidewalk. The employee slipped and twisted her knee resulting in a torn ACL in the right leg.,1
"An employee of Complete Environmental Remediation delivered material to a landfill where a  landfill employee was operating a track hoe. When the employee got out of his truck along with his assistant to cover the truck and prepare to return to the office, he was struck by the bucket of the track hoe in the shoulder, neck and jaw areas.",1
An instructor contracted MRSA through an abrasion on his right knee from bacteria on the padded mats used by personnel during training.,1
"An employee was preparing to hook a chain to a broken, wooden light pole laying on the ground.  A backyard machine tipped over and the boom attachment fell onto the employee. The employee sustained a lacerated spleen, a fractured back, a crushed diaphragm, multiple broken ribs and internal bleeding.",1
An employee was operating a stamping die and crushed his fingers in the machine resulting in amputation of the left index fingertip.,0
"An employee was repairing a roll-up door from an aerial lift. The lift basket suddenly dropped. The employee was admitted to the hospital with nerve damage to their shoulder, back, hip and a foot.",1
An employee was working in the heading department near a molder and dropped a hand warmer into the conveyor belt. The employee attempted to retrieve the warmer and suffered a partial amputation of the right middle finger.,0
An employee was operating a cutting machine and suffered the partial amputation of a middle finger.,1
An employee was stepping on a shelf while reaching for product and fell five feet. The employee sustained an ear laceration and a head contusion.,1
"An employee was walking to the front door, slipped on ice and fell to the ground resulting in injury to their left side.",1
An employee was walking from his car to the nursery entrance and was bitten by a stray dog resulting in the loss of a thumb tip.,1
"An employee was operating a galvanized kettle machine. As he was adjusting the chain link, his right arm slipped and contacting the scalding hot water. The employee was hospitalized for second-degree burns.",1
An employee slipped on ice in the parking lot and fell striking their head on the ground.,1
"An employee was installing chains in the lifting lugs of the transformer to secure the transformer to the trailer. The employee fell from the top of the transformer and sustained a concussion, fractured ribs, a broken clavicle, and a punctured lung all on the left side.",1
"An employee was in an aerial lift connecting a wire to a pipe inside the warehouse. When he raised the lift, his right arm contacted an overhead rotating ceiling fan blade causing a laceration and fracture to right arm/elbow.",1
"An employee opened the right door of a 53-foot trailer loaded with plastic bulkheads and empty 1/6 barrels. As the employee started to open the door, the weight from the shifted cargo pushed the door open causing the employee to fall approximately four feet to the ground. Some of the cargo fell on top of him as well. The employee was hospitalized for a fractured left hip and bruising to his left elbow.",1
"An employee was struck by a hatch lid due to over-pressurization of a void tank. This caused the employee to fall approximately 12-14' to the dry dock floor below resulting in broken ribs, a bruised brain and bruised vertebrae.",1
"On February 8, 2019, at approximately 8:30 AM an employee was cutting a 3"" pipe with a bandsaw.  While cutting, the pipe spun and hit the employee's left thumb area resulting in a laceration and a fracture.",1
The injured employee was assisting coworkers to set a fiberglass wall inside a trench. The injured employee had his hand on the wall when the wall shifted and pinched his finger between it and another section of already placed wall. His right middle finger was amputated behind the nail at the first knuckle.,1
An employee was changing a razor blade on his non-retractable utility knife. He put the knife down on the ground and removed his glove. As he began removing a plastic strip on the bottom of the sheetrock his hand brushed against the knife and lacerated his index finger.,1
"On February 8, 2018, employee was cutting plastic material with a metalworking shear when the machine amputated the tip of his right ring finger. The machine was guarded at the time of the incident.",0
An employee was using a torch to cut a weld on an semi-trailer truck when the employee's coat caught on fire. The employee suffered burns to his chest and back and was hospitalized.,1
An employee was walking down a concrete ramp carrying carpet and fell. The employee sustained an arm fracture that required surgery.,1
A crew was dismantling a hoist on the exterior of a building when one of the turnbuckle ties snapped at the eye where it was bolted into the mast. The mast which weighs approximately 100 lbs. and measures approximately 10.5 feet swung down approximately 4-5 feet and struck an employee on the back of his head.  The employee was hospitalized with skull fractures and hemorrhaging.,1
"An employee was walking from the company truck to the worksite, slipped on mud and fell resulting in a broken right ankle.",1
A custodian was found at the bottom of a stairwell. The employee sustained multiple fractures.,1
"An employee was painting a trailer from an A-frame ladder. The ladder shifted and the employee fell to the ground, suffering a broken left ankle and right heel. The employee was hospitalized.",1
"On February 8, 2019 an employee was checking the airflow in the aluminum chip collector on a saw when a right fingertip was removed by a flapper.",0
"After a roll change, an employee was scooping up waste paper when his left hand was caught in a conveyor on the newspaper press, resulting in a de-gloving injury and hospitalization.",1
"On February 9, 2019, an employee received multiple concussions after tripping over a chair and falling at the nurse station. The employee struck her head on the coat/shoe rack.",1
An employee was working on a section of roof when the chain saw kicked back and cut the employee's right leg. The employee was hospitalized.,1
"On February 9, 2019, an employee was operating an abrasive blasting tool when the pressurized media hit the employee in the knee. The employee was hospitalized for surgery.",1
"An employee was walking down the sidewalk, tripped and fell forward resulting in injuries to her mouth and a forehead abrasion. The employee was hospitalized and had four teeth removed.",1
"An employee was attempting to remove remelt aluminum for a sow mold as it was not full. Ice on the piece of scrap metal he was using caused the molten metal to pop and splash onto his left wrist and the right side of his face, causing first- and second-degree burns. He was hospitalized.",1
An employee slipped on ice in the parking lot and fell to the ground. The employee was hospitalized with a hip injury.,1
A crew was investigating a leak on the side of a road. The injured employee was walking back to his truck when he was struck by a passing vehicle. He suffered a leg fracture. The employee was wearing his high-visibility vest at the time of the incident.,1
An employee slipped on ice in the parking lot and fell breaking the left leg.,1
An employee slipped on ice and fell breaking an ankle.,1
An employee was cutting palm trees and two thorns got stuck in his left hand.,1
An employee was walking on the sidewalk and was struck by a car resulting in a head laceration and broken leg bones.,1
"An employee was removing an idler roll from a lathe using a hoist. The idler roll was rigged using a single nylon web strap that was attached to the idler roll with a choker hitch. When the idler roll was lifted, one end of the idler roll dropped. The employee reached out to catch the roll and the tip of his left little finger was crushed between the idler roll (200 lbs.) and the lathe. The finger was partially amputated.",1
An employee was restocking the ice cream bar and lifting boxes from a lower level to table height and was hospitalized for a back strain.,1
An employee was loading a railcar. While loading the last coil the band broke and struck the employee. The employee was knocked down and sustained an elbow injury.,1
"While discharging bundled pipe, an employee fell into a hole caused by the pipe shifting in transit.  The employee suffered a fractured right leg and was hospitalized.",1
An employee was on a ladder when the ladder broke and the employee fell to the floor resulting in a broken leg.,1
At approximately 4:30 p.m. there was an explosion and fire while starting up a unit at a refinery. One employee was burned on the face.,1
An employee was struck by a forklift causing left foot fractures.,1
An employee was being trained to operate a forklift. The forklift collided with a storage rack and the employee's left foot was lodged between the forklift and the rack.,1
An employee slipped and fell on ice breaking a leg in two places.,1
While walking into the building an employee slipped on ice and fell suffering a possible leg fracture.,1
An employee was replacing a battery on a sporting clay machine out on the ranch when the sporting clay arm unexpectedly energized and hit the employee in the head. The employee was hospitalized for swelling in the brain.,1
An employee was cleaning the hopper on a roll making machine and lacerated their hand and fingers when the machine was energized.,1
A driver was stepping out of his truck when he slipped and fell on snow and ice. He lacerated his arm and was hospitalized.,1
An employee fell approximately three feet from a step ladder.,1
"An employee was cleaning a spill off of racking, tripped over their fall protection and fell breaking an ankle.",1
"On February 11, 2019, at 1:30 p.m., a journeyman mechanic was performing a diagnostic test on a tractor (truck). While standing inside the engine bay of the truck between the frame and the left steer tire axel, the vehicle started and the truck moved forward pinning the employee under the steer tire. The employee's upper leg was crushed and the hip and ankle were fractured.",1
"On February 11, 2019, an employee was working on a machine pinched their left index finger  between the top of the machine and the punch resulting in amputation.",0
"An employee was on a residential property collecting electrical meter readings, slipped on icy grounds and fell fracturing her left foot. The employee was hospitalized for surgery.",1
An employee was putting a basket into a dryer using a hoist. The lid came down on his right hand causing a laceration with exposed bone and tendon.,1
An employee was operating a milling machine when their glove was caught in the machine resulting in amputation of a thumb.,1
"A home health aide was leaving a grocery store when she slipped and fell to the ground in the parking lot, breaking her left hip.",1
"An employee was installing a 20-pound replacement motor assembly, banging on the part. The employee experienced altitude change and heavy lifting stress and was hospitalized with a collapsed right lung.",1
An employee was breaking loose a sheet metal duct connection that was sealed with pure duct seal using a flat head screw driver. The screwdriver slipped and struck his left eye. He was hospitalized.,1
An employee was coming off a fracturing pump when he lost his footing and fell to the ground approximately 17 inches onto this left knee.  The fall resulted in a broken left leg just below the knee which will require surgery. The employee was wearing the personal protective equipment at the time.,1
An employee fell from a ski lift and suffered a fractured right hip.,1
"On February 11, 2019, an employee was helping put a vehicle onto the lift when their left index finger was caught between the lift and the vehicle and amputated below the nail bed.",0
An employee was rolling a bull gear when it rolled over a bolt causing the gear to fall and strike the employee's leg and fracture it.,1
An employee took a sweeper outside because the sweeper had caught on fire. Maintenance came outside with a fire extinguisher to put out the fire. The extinguisher chemicals flew into the employee's face and the employee swallowed some of it. The employee was hospitalized with difficulty breathing.,1
An employee was using a cutoff saw to cut a hole in the top of a digester tank. Sparks ignited the methane gas in the digester tank. He was thrown over a railing and fell. The methane gas explosion burned his back and midsection.,1
An employee was placing a tarp on the load of the truck bed and fell off striking their head on the trailer and the ground. The employee suffered a fractured skull and wrist.,1
An employee slipped on the wet walkway and fell hitting his head. He was hospitalized for bleeding on the brain.,1
"An employee installed a fuel pump on a customer's car and was bleeding the air out of the fuel lines. When all of the air was bled out fuel started to spray out onto his face, chest, arm and hand. He jumped back to get away from the spraying fuel and the wrench he was using to loosen the fuel line touched the positive terminal on the battery and caused a spark which ignited the fuel. The employee suffered third degree burns to the right hand.",1
An employee was moving freight inside the truck trailer with a pallet jack and pinned his right foot between another skid and the pallet jack. The employee's foot bent back and the steel toe tip lacerated and fractured the top of his foot/toes.,1
An employee was using a snow blower and attempted to clear the snow from around the rotating brush when it energized and severed the employee's right index fingertip.,0
"An employee was walking in the parking lot, slipped on ice and fell breaking a femur.",1
An employee was letting visitors out of a set of double doors when a patient bolted from an adjacent room and struck the employee knocking her against a wall. The employee suffered a fractured left humerus that required surgery to repair.,1
"A forklift was backing out of a pick location after doing some work on a raw material container.  While in reverse, the lift struck another employee in the back. This forced the employee's foot into an open end on a drum lifting device. The pressure compressed his steel toe boot and fractured toes on his left foot.",1
An employee was clearing jammed plastic cups and lids in a sauce packaging machine. The employee's middle fingertip was amputated.,0
An employee was climbing an A-frame ladder and fell to the ground sustaining a head injury.,1
Four employees were renovating a pre-existing commercial facility. One employee fell four feet from a scaffold and sustained head and hand injuries.,1
An employee was reaching between oven lines when the robotic arm was tripped and the molds closed. The employee's arm and face were caught in the molds causing severe burns.,1
"An employee was walking to the store from the fuel station, slipped on ice and fell breaking bones.",1
An employee was walking a client to the car to drive the client to work when she slipped on ice in the driveway and fell striking the back of her head.,1
"An employee was checking on equipment in the area where a 55 gallon drum of cleaner was located. The drum is hooked up to a pump and oven and set to clean the oven on an automatic timer. The automatic timer went off while the employee was in the area and he was sprayed with the cleaning chemical, causing chemical burns to the face.",1
"An employee was removing wiring from deactivated poles. As the employee got to the top of the pole, the other pole that was connected by the wires gave way and pulled the pole the employee was on top of down. The employee fell approximately 15-20 feet and was hospitalized for a fractured left hand and lacerations. His left middle finger was surgically amputated at the first knuckle.",1
An employee was slicing tomatoes with a slicer and amputated the tip of her right thumb.,1
An employee was on the ground in a customer lot. He was throwing a strap over the load on a flat bed trailer to prepare for unloading when he slipped on ice and fell injuring his lower left arm and elbow.,1
An employee was on a forklift loading/unloading trailers when the trailer he was on pulled away from the dock door. The forklift with the employee strapped in fell four feet and landed upright. The employee suffered a fractured vertebra.,1
An employee was using a rodder snake to unclog a 4-inch sewer line. The rod hit a blockage while being pulled back and bound around the employee's left hand severing part of the ring finger at approximately the first knuckle.,0
"An employee was using a crowbar to lift the back left side of a section of electrical switchgear cabinet to install a shim. The crowbar rolled, and the weight of the gear came down onto the tip of the flat piece of metal he was pushing the shim with. His left index finger was pinched between the shim metal and the concrete pad amputating the fingertip.",0
"An employee was walking outside, slipped on ice and fell fracturing the right hip.",1
"On February 11, 2019, at approximately 11:29 a.m. a flight attendant was walking from an aircraft to the fixed-base operator's building when she walked into a static wick on the wing of a Cessna airplane. The employee sustained a laceration next to the left eye resulting in five stitches and hospitalization.",1
"An employee was pulling the kingpin from the fifth wheel attachment point, slipped on ice and fell to the ground. The employee sustained a fractured hip.",1
An employee was pulling two sheets of plastic together with his hands. He was holding a nail in his right hand which he was going to use to stitch the sheets together. His right hand slipped off the plastic and traveled toward his face and the nail struck his right eye. The employee sustained an eye injury requiring hospitalization. The employee was wearing safety glasses at the time.,1
"While installing new steel decking on an interior mezzanine, an employee fell 29 feet, suffering a forehead laceration. The employee was hospitalized.",1
An employee was hospitalized when his pacemaker was exposed to magnetic fields causing an irregular heartbeat.,1
"On February 12, 2019, an employee was training to use the pneumatic foam compacting tool and caught his right hand fingers between two plates. The right index, middle and ring fingers were crushed resulting in surgical amputation.",1
An employee amputated his pinky and ring fingers while cutting laminate on a table saw.,1
An employee was conducting concrete crushing operations. The equipment was turned off and the employee moved to an area to remove debris. The concrete crusher was turned back on while the injured employee was in the area causing the amputation of his right arm.,0
An employee was unloading the back of a trailer with an electric pallet jack and smashed his foot between the pallet jack and the trailer interior wall. The employee sustained a broken foot and several broken toes.,1
"An employee was moving rail cars. While standing on the rail car trying to set the brakes, he slipped and fell and the rail car rolled over his foot. The employee's foot was surgically amputated.",1
"An employee was loading packages onto a van. He turned around and was walking on the concrete floor when plastic from pallets he had straightened up caught his legs, causing him to trip and fall to the ground. He suffered a broken left hip.",1
An employee stood up from a chair and tripped over an open file cabinet drawer.  The employee fell to the floor and fractured her right humerus.,1
"An employee was working from a walk plank over stairs, installing sheets of insulation. He fell off the plank to the floor 16 feet below. He was hospitalized for fractured ribs and a kidney laceration.",1
A temporary employee suffered a fingertip amputation while cleaning an oil basting machine.,1
An employee was performing maintenance on the electrical service and was shocked.,1
"An employee was servicing a garage door at a commercial establishment from an extension ladder approximately 15 feet in height. The ladder slid out from under him and the employee fell to the ground, breaking his right arm and spraining an ankle. The employee was hospitalized for surgery on his arm.",1
"An employee was teaching swimming lessons when a participant jumped into the pool and landed on the employee. The employee sustained injuries to his head, neck and shoulders and was hospitalized.",1
"While arriving at work, an employee slipped in the icy parking lot and fell to the ground, suffering two broken ribs. The employee was hospitalized.",1
An employee slipped and fell while exiting a truck fracturing the tail bone.,1
An employee was using a panel saw and positioning a piece of plastic to be cut when his pinky finger was amputated by the saw blade.,0
An employee fell and fractured the right leg.,1
A mold cart rolled backwards and off the side of the ramp at the dump station striking an employee and causing a lower right leg fracture.,1
"An employee was climbing a ladder to retrieve some tools on location at a job. The employee slipped, lost his balance, and fell to the ground breaking both of his legs.",1
An employee fell while salting a concrete sidewalk. He suffered an elbow injury and was hospitalized.,1
A maintenance employee was removing a guard to check a pulley size on a drive when the motor came on and the guard caught on the pulley. The pulley spun and hit the tip of his right middle finger resulting in amputation of the fingertip and nail.,0
An employee was being trained by his supervisor as they removed structural steel from a transfer line. An 8-foot-long .25 thick steel C channel tipped over and the employee's left middle finger was pinched between the steel and the fixed rail support. The fingertip was amputated.,0
An employee fell on the stairs and broke her left leg.,1
An employee was feeding a machine when their glove was caught on a shaft resulting in fractures to the left index and middle fingers.,1
An employee was filling a tire with foam. A sudden release of the foam struck the employee causing abdominal trauma and a contusion.,1
An employee was stacking a skid and tripped over a roll of stretch wrap that was on the walking surface. The employee sustained a fractured femur.,1
"An employee was exiting an elevator when she slipped on a puddle of water and fell to the floor, fracturing her right shoulder. She was hospitalized and had surgery.",1
An employee lost his balance while stepping onto a baker scaffold in the parking garage and fell to the ground resulting in a fractured wrist.,1
An employee's hand got caught in the gate resulting in partial amputation.,1
An employee stepped onto the plexiglass window on the binding machine. The window broke and the employee fell three feet suffering a broken leg.,1
"An employee was walking up a grass hill to the workplace. The employee slipped in mud and slid down the hill, hitting a concrete barrier. The employee suffered a broken left ankle.",1
An employee tripped and fell breaking her femur.,1
An employee was operating a differential crane weighing 300 pounds. He placed a clamp to secure the crane onto the cable. The clamp came undone and the crane fell onto the employee's left leg breaking it. The employee was hospitalized for treatment.,1
"An employee was walking on wet concrete to get to a different shop/unit. He fell, breaking his right tibia and fibula.",1
"The injured employee was working with another employee stripping wax off the floor. The injured employee backed into the area just mopped by the second employee, slipped and fell hitting his head on the floor. The employee suffered a concussion.",1
An employee was helping others load pipe onto the back of his trailer. His right hand was caught under some pipe and the tip of his right ring finger was amputated.,0
An employee was changing the pump at a wellsite. The line froze up and the trapped hot condensate shot out and burned the employee's right forearm.,1
An employee was cutting down packaging materials to build cardboard pallets for export orders. His  fingers contacted the table saw blade causing a left middle fingertip amputation and a laceration to the left index finger requiring stiches.,0
"An employee was moving a steel I-beam using a pendant-controlled crane. The I-beam struck the employee's right foot, causing the amputation of two toes.",0
"An employee was climbing a straight ladder that was secured to a boiler.  On the third or fourth step of the ladder, the employee's foot slipped causing him to fall backwards and hit a fire extinguisher that was on the wall before falling to the concrete ground. The employee was hospitalized due to an injury to his twelfth vertebrae.",1
"A saw operator was rolling a bar on a roller table. The bar fell off and struck his right foot, breaking his second toe. He was hospitalized, requiring immediate surgery.",1
"An employee was walking from his office when he tripped over a temporary wooden sidewalk structure. He suffered a broken tibia and fibula, as well as torn ligaments in his leg and ankle.",1
An employee was using a wheel grinder and severely lacerated his thumb. The grinder was unguarded at the time.,1
"An employee was delivering mail on her route. While walking up to an address to deliver a parcel, she slipped and fell on accumulated snow and ice breaking an ankle.",1
The injured employee was driving a shuttle. He parked the shuttle in an aisle in front of storage racks in the warehouse. A forklift backed out of the storage racks and struck the injured employee's left leg fracturing the shin.,1
A carpenter was using a 7.25 inch circular saw to cut a 2 x 4  wooden board that will be used to construct a barn. The circular saw kicked back causing the amputation of the right tip of his thumb including bone loss.,0
"An employee was climbing a six-foot A-frame ladder to access TV wiring, when she lost her balance and fell to the floor, fracturing six ribs on her right side.",1
"An employee was finishing a roof inspection. While stepping down onto a ladder, the employee fell to the ground and was injured.",1
"A metal worker had raised his air staple gun up to install a soffit when it fired, stapling his left wrist to the bone. He was hospitalized.",1
"An employee was returning to his truck after making a delivery, slipped, and fell to the ground breaking a hip. The employee was hospitalized.",1
"An employee was standing on top of a tank that was about 3 feet off the ground, filling it with treatment mixture. The employee fell from the tank onto metal stairs, suffering two broken ribs and a collapsed lung.",1
An employee was quenching aluminum when boiling water went down the employee's boot. The employee suffered second- and third-degree burns and infection.,1
"The injured employee was part of a wrecking crew removing plywood formwork from a structural concrete deck. He was using a pry bar to loosen the formwork. As he was pushing the pry bar upward, the formwork separated from the concrete and the pry bar slipped upward, smashing his left index finger between the bar and a metal support pole and causing amputation of the proximal joint.",0
"An employee was setting up a piece of metal stock on a lathe to work on. As he adjusted the cutting knife, his right thumb was caught between the knife and the stock. The tip was cut off.",0
"On February 13, 2019, at approximately 2:30 p.m., an employee was cleaning and greasing a conveyor line in the pick area (enclosed building) when something got stuck in the roller/brake below. The employee got off the conveyor line and it was turned off to unjam the roller/brake.   When the conveyor line was turned back on, the employee, who was back on the conveyor line, was carried via the conveyor to the end of the line and out of the building falling approximately 13' feet below onto a debris pile. The employee was hospitalized for a back injury.",1
"An employee was moving a floor pallet jack down a sloped sidewalk from one building to another. The employee fell, striking his head on a pole. He was hospitalized.",1
"At about 4:00 p.m. on February 13, 2019, while measuring glue at a veneer press, an employee was pinned between the press and an automated stacker. The employee suffered contusions/cuts and was hospitalized.",1
An maintenance employee was painting the curbs at an apartment complex and was struck by a car. The employee suffered a broken hip and pelvic bone.,1
An employee was cutting a calf hip carcass with a 5-inch butcher knife when the knife slid off of the carcass and impaled the employee's right thigh.  The employee was hospitalized.,1
An employee was operating a molding machine and suffered a transphalangeal amputation of the right index finger while trying to retrieve a marker.,1
"An employee was adjusting a bicycle's rear gear assembly. The employee's chisel tool slipped and lacerated the employee's left middle finger, causing an amputation to the fingertip.",0
An employee was working on the mill cut off press and lifted a door flap to add oil to the press. The press cycled and crushed the employee's right hand.,1
"An employee tripped on a carpet and fell, suffering a torn right anterior cruciate ligament.",1
An employee was scraping glue off a machine when their left right finger was caught in a cam on the machine and fractured.,1
"Employee was walking to her car when another car struck her, breaking her leg. She was hospitalized.",1
An employee tripped over a paver and fell to the ground resulting in a fractured right knee.,1
"An employee fell on a snow-covered embankment, suffering a broken ankle.",1
An employee was cutting wood using a table saw. The saw amputated the tip of the employee's left thumb. The saw was not guarded at the time of the incident.,0
An employee was exiting the building he was cleaning. The wind slammed the door back onto the employee's hand causing a left right fingertip amputation.,0
"An employee was attaching the tie off to the roof, slipped on ice and fell off the roof to the ground. The employee sustained facial fractures and a fractured left foot.",1
"An employee was transporting a 1700 lbs. electrical panel. The panel fell to the floor and struck the employee causing a fractured back, contusions and facial lacerations.",1
"A worker was positioning the forks on a back hoe when one came loose from the bracket, fell and hit his left leg resulting in left leg fracture.",1
An employee slipped on a patch of ice and fell resulting in a broken ankle that required surgery.,1
An employee was disassembling a scaffold and reaching for a scaffold pole when he fell forward into another horizontal scaffold pole causing a fractured right forearm.,1
An employee fell five feet off a ladder and landed on frozen ground. The employee sustained broken ribs and an injury to the collar bone area.,1
"An employee was using a handcart to move kegs. The cart slipped and pinched the employee's right ring finger, causing the amputation of the fingertip.",0
An employee was MIG welding on the frame of a forklift when his clothing caught on fire. He suffered first- and second-degree burns to the left arm and was hospitalized.,1
The injured employee was standing next to his parked forklift. Another forklift was backing out of a trailer and struck the injured employee pinning him against the parked forklift. The injured employee was hospitalized for a leg injury that required surgery.,1
"An employee was dropping honeycomb (stomach liner) using a 6"" knife. As he was making his upward cut, the knife slipped out of his hand and propelled backwards into his chest and lacerated his liver.",1
An employee was working on top of an overhead crane and changing a wire rope which is considered a half gantry. The crane was activated and the employee was pinned between the two cranes. The employee sustained contusions and bruising to the left thigh.,1
An employee was observing/testing a five-spindle nut runner machine (wheel torque wrench) after preventive maintenance was completed and suffered a partial thumb amputation after contacting one of the five rotating spindles. The employee was wearing gloves at the time.,0
"An employee slipped and fell on a wet floor outside a cafeteria, suffering a vertebral compression fracture.",1
"An employee was operating a head press to manufacture tanks/vessels. A piece of metal fell into the work area and was removed. As the press cycled back up, the employee's glove was caught on a burr on the side of the head pulling their left hand into the press. The left ring finger was lacerated and surgically amputated.",1
"On February 14, 2019, while making an auto parts delivery, an employee slipped on ice and fell to the ground. The employee suffered a broken left hip and was hospitalized.",1
"An employee had been using paint thinner to clean auto body parts. When he went outside to smoke, paint thinner on his gloves ignited and burned his hands.",1
"An employee was filling an order when his leg was pinned between a pallet and a steel rack. He suffered hairline fractures of the right tibia and fibula, as well as a laceration.",1
An employee was removing an old garage door and installing a new one. A piece of the door struck him in the right eye. He was hospitalized.,1
An employee was operating a stand-up forklift when it struck a pole. His left hand suffered crushing/fracture injuries. He was hospitalized.,1
"An employee was walking in a dock area. A forklift struck the employee as it backed up, breaking the employee's right ankle and toes.",1
An employee was reaching for a cardboard box to begin assembling it when he lost his footing and fell back onto a mold that was stationed behind him. The employee was hospitalized for a laceration injury.,1
"On February 14, 2019, a truck mechanic sustained the amputation of his left index fingertip while inspecting work he had performed on a forklift while it was running. The employee had replaced the drive wheel on the forklift.",0
An employee was moving cars to be detailed and was pinned between a moving car and a parked car resulting in knee and leg fractures.,1
"On February 14, 2019, the injured employee was preparing to move an underground boring machine. As the employee was standing next to the machine, another employee was backing up a ""Vac Truck""  and struck the injured employee. The employee was hospitalized for severe back and neck injuries.",1
"On February 14, 2019, at approximately 3:00 p.m., an employee was stepping off a ladder onto a low slope roof approximately 10 feet in height. He stepped onto a section of rotten plywood covered with asphalt shingles which gave way and he fell to the ground below. The employee injured his upper back and was hospitalized.",1
"A mail carrier was attacked by two pit bulls at a house, suffering injuries to the right forearm, left forearm, left hand, and left ring finger.",1
An employee was working on a palletizer when his left index finger became entangled in a conveyor belt and was amputated.,0
"An employee was moving drums in the back of a truck bed using a drum lifter. The employee's thumb was caught between the drum and the lifter, resulting in a partial amputation.",0
An employee was using a wrench to adjust the belt tensioner on a screening machine when the wrench slipped off the bolt and his hand went into the belt and pulley resulting in amputation of the right pinky fingertip and a right forearm laceration.,1
An employee was operating a machine that makes straws and amputated the right middle fingertip. The machine was guarded at the time.,0
"An employee was operating a groove machine. As he checked the grooves in a pipe, his right hand was caught between two metal plates. The index and middle fingers were amputated.",0
"An employee was removing a pipe with a 36"" pipe wrench. The employee was backing up when he slipped and fell backwards hitting his head on a rack.",1
An employee was on a six-foot ladder replacing an aluminum balcony hand rail system and fell onto the concrete bed landing on his hip and breaking his pelvis and possibly his back.,1
An employee contacted an open gear at the gear box under a conveyor belt and amputated the right index fingertip.,0
A masked shooter shot two employees. One employee was shot in the chest and killed. The second employee was hospitalized for multiple gunshot wounds.,1
"An employee was unjamming chicken frames in a rapid deboner. His left index finger was caught between a guard and a chicken frame, resulting in a partial amputation of the finger.",0
"An employee was helping set up a banquet hall and was walking with a tray when the employee lost balance, fell to the floor and fractured the right hip.",1
"On February 14, 2019, an employee slipped and fell on a wet floor while entering a building. The employee suffered a broken shoulder and facial injuries and was hospitalized.",1
"An employee was standing on a wrench, trying to loosen a bolt. The employee slipped and suffered a broken right leg.",1
An employee was scooping dog waste when a dog bit her on the left hand and right calf.,1
Two employees were delivering construction materials to a school site that was being renovated. An employee climbed a rope that was hanging in the gym and fell breaking an ankle.,1
"An employee was trimming a tree limb from a ladder. The limb fell and struck the employee, who in turn fell from the ladder. He struck his head on the concrete sidewalk below, suffering head trauma, and was hospitalized.",1
An employee was servicing an overhead crane and caught their left hand in the chain and sprocket mechanism. The employee suffered the amputation of the right middle fingertip at the at nailbed.,1
An employee was operating a forklift and backed into a pallet of packaged bottles. As she stepped out of the forklift the product fell onto her. Her right lower leg was caught between the pallet and the floor causing injury to the lower leg.,1
"An employee was working from a Baker scaffold when he fell 6 feet to the floor, breaking his hip.",1
"On February 14, 2019, an employee slipped on ice while walking into work. He fell to the ground, shattering his ankle, and was hospitalized for surgery.",1
"An employee was installing a piece of equipment that was being lifted by a mobile crane. The equipment shifted, striking the employee on the right hand and injuring it.",1
"An employee was loading construction and interior office garbage into the rear loader of a garbage truck. As he pushed in a desk, the loader activated; his finger slipped and was caught between the inside wall of the truck and the desk. He suffered a partial amputation of the left thumb above the knuckle.",1
"An employee was moving cars on the lot, slipped on ice and fell backwards hitting his head on the ground. The employee was hospitalized.",1
"An employee was operating a drill press. The bit bottomed out, causing the vise to rotate and crush the employee's left hand. The employee suffered an amputation to the ring finger.",0
An employee fell on ice and fractured the left femur.,1
"An employee was handling a catalyst hoist. As he tried to stop the load from swinging, his left little finger was caught between the hoist and a handrail. The fingertip was crushed.",1
"On February 14, 2019, an employee was between two I-beams while attaching rigging when the second I-beam rolled onto his right foot trapping it. The employee sustained a severe ankle strain.",1
An employee was operating a curl and bead machine and attempting to adjust a part that had dislodged from the machine when his right index finger was caught between a pail and the machine resulting in a fingertip amputation. The machine was guarded at the time.,1
"An employee fell from the roof of a commercial building, landing on the ground about 20 feet below. The employee suffered cracked vertebrae (one in the neck and one in the back) and broke both wrists.",1
"An forklift ran over an employee's right foot, injuring it.",1
An employee was using electrical testing equipment while working with light fixtures and was shocked by a 110-volt current. The employee was hospitalized.,1
An employee was working inside the grain bin loading grain into a truck and stepped on the auger causing a partial amputation of the left foot.,1
"A mail carrier slipped while walking across a snow-/ice-covered lawn. He fell to the ground, breaking his shoulder.",1
"An employee fell off a manhole structure to the ground 8-10 feet below, suffering a broken right knee and a hairline fracture to the left ankle.",1
Two employees were mounting a metal rod on a workbench mounted vice. The metal rod slipped from the vice and struck the tip of one employee's right ring finger causing a fingertip amputation.,0
"While walking across a driveway, an employee was struck and dragged by a delivery truck as it backed up. The employee suffered a concussion, a broken collarbone, four broken ribs, and a broken right femur.",1
"An employee slipped and fell in a parking lot, landing on his back and hitting his head. He suffered back and head injuries.",1
"An employee was standing on the third step of a 6-foot ladder, pulling telephone cable through a ceiling. He fell to the carpeted floor about 10 feet below, and his head struck the wall. He suffered two skull fractures and a trace mastoid effusion. He was hospitalized.",1
An employee was reaching for a rope when his gloved left hand was pulled into a chain and sprocket on the back of a truck. The tip of his index finger was amputated and his middle and ring fingers were broken. The chain and sprocket was unguarded at the time.,0
"An employee was operating a lift gate on a truck. The lift gate mechanism pinched the employee's left ring finger, causing its amputation.",0
"An employee was cleaning pipes. The employee's left index finger was caught between a pipe and a machine, suffering a laceration and a cut tendon.",1
"An employee was on an order selector. The employee fell while reaching for a tire, landing on the warehouse floor about 30 feet below. The employee suffered a broken ankle, hip, and arm. Fall protection was not being worn at the time.",1
"An employee was cleaning out a machine when an edge pusher activated, catching the employee's right index finger and amputating the tip. A different part of the machine was locked out at the time of the incident.",0
"An employee's foot was caught between an electric cart's accelerator and its brake as the employee stepped off the cart. The cart accelerated forward, striking a building column and breaking the employee's right leg/ankle.",1
An employee was installing a concrete storm drain pipe from inside a concrete storm drain box/catch basin. The pipe rolled over and struck the employee in the face/jaw. The employee was hospitalized.,1
"An employee was removing wooden 2-by-4 deck boards from a bulkhead flat railcar. He was using an overhead crane and lifting device to pull the boards up from the securement bolts. He was near the end of the railcar, removing the final groups of boards. The overhead crane's steel lifting device caught a 1/2-inch steel body bolster plate under the wood; as the crane began to lift, the lifting device slipped off the plate and flew into the air. It struck the employee in the face and right arm, causing non-displaced facial fractures and lacerations to the lip and gum line and a bruised right upper arm.",1
"A trackhoe moved a concrete storm box, causing it to break an employee's lower right leg. The employee was hospitalized.",1
"An employee was in a dryer room. Her left hand contacted a rotating airlock/rotary feeder valve in a pipe, causing the amputation of her index fingertip.",0
"An employee was nailing a double-headed nail into a form. One of the heads flew off the nail and struck him in the eye, causing a cut that required surgery.",1
"An employee was troubleshooting and adjusting the edger bar on a strapper. The horizontal bar struck the employee's left arm, causing a contusion.",1
"An employee was checking piece mark numbers on pipe braces. A timber dunnage broke and a pipe rolled off, striking the employee's right foot and breaking his big toe.",1
"An employee was rehearsing a motorcycle stunt for a motion picture: a maneuver in which the motorcycle was stopped on the front wheel with a sidecar attached. The motorcycle's handlebars locked to the left, causing the motorcycle to tip over and the sidecar to strike the employee. It broke the employee's left ankle and collarbone, as well as two ribs.",1
"On February 15, 2019, an employee was using a rolling ladder to retrieve a chair from the top shelf in a warehouse area. He fell while descending the ladder, first landing on the box containing the chair (where he broke three ribs), then landing on the concrete floor (where he struck his head and suffered a concussion). He was hospitalized.",1
"An employee was trying to repair a machine used to flip kettles. A screw had broken in the pivot block, causing a kettle to get stuck; the employee was using a hoist to lift the kettle to reduce tension in order to remove the kettle. The kettle fell onto his hand, amputating the tip of his right thumb.",0
"On February 15, 2019, a truck driver was unstrapping metal beams from a flat truck. A forklift on the opposite side of the truck lifted the beams and they fell onto the driver, breaking ribs and other bones. The employee was hospitalized.",1
"An employee was setting a double-tee into storage with the help of a gantry crane. As he was guiding the piece into position, it swung and pinched fingers on his left hand. His index fingertip was amputated (including bone) and his little finger was injured.",0
"An employee was moving a fixture from a forklift. The fixture slipped and pinched his right index finger, amputating it at the first knuckle.",0
An employee was operating a band saw when the blade came down on his thumb causing an amputation.,0
An employee caught fire while warming up next to a heater. The employee suffered second-degree burns to the left leg.,1
An employee slipped in an icy parking lot and suffered a closed compression fracture of a vertebra in her back.,1
"An employee slipped and fell on a patch of ice while taking out the trash, suffering a knee fracture.",1
"A piece of crane rigging struck an employee's right arm, breaking the radius, dislocating the ulna, and causing a laceration. The employee was hospitalized, requiring surgery.",1
"An employee stepped off a ladder onto a 5-foot-wide porch roof. The roof collapsed, and the employee fell with it to the ground about 18 feet below. The employee suffered wrist and leg fractures and facial lacerations.",1
"An employee was working from a 6-foot stepladder, pulling a piece of wood from a concrete wall. The employee fell backward from the ladder to the ground, landing on their tool belt and suffering a back sprain.",1
An employee was ironing when a sheet became lodged in the gears at the lower part of the ironing machine. The gears injured the employee's right arm.,1
While installing a pin on a trailer an employee lost his footing and fell to the ground below. He broke a vertebra in his back.,1
"An employee was installing a sewer pipe in a trench. He was changing the bucket to a smaller bucket using the quick connect attachment on an excavator when the bucket fell on the employee, breaking his leg. He was hospitalized.",1
"An employee was unloading a skid of antennas from the back of a pickup truck. The truck's lift gate was wet with rain; the employee slipped and fell backwards from it to the ground, suffering a broken right hip.",1
An employee was cutting steel stock on a shear machine. The stock kicked back when it got to the end of the steel bar and pushed the employee's right index finger into the machine's pinch roller. The employee suffered a partial fingertip amputation.,0
"While helping reposition a patient, an employee became tangled in an emergency call wire and fell. The employee suffered a broken right hip and was hospitalized.",1
"An employee's toes were caught between a metal track and a metal roller, causing a fracture to the second toe and lacerations to the first and third toes.",1
"On February 15, 2019, an employee was standing in an aisle when a nearby forklift stopped suddenly, causing a sack of pet food to come off its forks and strike the employee. The employee suffered a broken left hip and was hospitalized.",1
An employee was performing preventive maintenance on a machine. He was lubricating the pulley chain using a rag when the machine cycled and the rag and his right hand were pulled into the pulley chain causing two fingertip amputations.,0
"An employee was changing a cylinder on a printing press. The employee's left index finger was caught in the hoist used to change the cylinder, causing an amputation to the fingertip.",1
An employee was on a ladder pulling merchandise when the employee fell from the ladder and struck the ground. The employee lost consciousness and was hospitalized.,1
"An employee was carrying a dress through a store when she tripped and fell onto the hardwood floor, landing on her right hip and breaking it.",1
"An employee's hand was caught and injured between a pipe and a wooden skid, with an excavator applying pressure.",1
"An employee was standing next to his pallet jack when another employee's pallet jack hit him, injuring his left ankle/foot.",1
"An employee was standing about 18 feet away from a 4-inch hose monitoring a pigging operation. The pig became stuck in the hose, causing pressure to build up; the hose whipped and struck the employee in the right upper arm, breaking his humerus.",1
"An employee was rip cutting on a table saw. The blade came into contact with the employee's right hand, partially amputating the index finger and lacerating the middle and ring fingers.",1
An employee was pulling the locking pin from an attachment on an excavator. Pressure buildup caused the pin to pull back. The employee's right hand was caught between the locking pin and the attachment and the tips of the middle and ring fingers were amputated.,0
"An employee fell on steps in a parking garage, suffering a broken ankle. The employee was hospitalized.",1
"A maintenance employee was working on a conveyor line when a chain and sprocket tore the skin off his right middle finger, broke the bone, and amputated the tip.",0
"An employee slipped on ice while walking across a parking lot, falling to the asphalt. He suffered a skull fracture and brain bleed.",1
An employee was operating a walkie powered industrial truck (PIT) and smashed their left middle finger between the PIT handle and a concrete bollard on the way into the ice room. The finger was amputated at the first knuckle.,0
"An employee slipped and fell while mopping a floor, suffering a broken hip, a bruised left shoulder, and a head contusion.",1
"On February 16, 2019, an employee was placing a liquor bottle on a shelf. The bottle broke and lacerated his right palm. He was hospitalized.",1
"While working on a production floor, an employee was struck by a board kicked from a pallet dismantler. The employee was hospitalized.",1
"A pressure washing stream crossed an employee's left foot, lacerating it. He was hospitalized.",1
"An employee was rinsing equipment from a ladder. The employee fell from the ladder to the floor and was hospitalized, suffering a concussion.",1
"An employee was removing film from the seal bar on a bagging machine. The sealer bar came down onto his right middle finger, causing a partial amputation.",0
"After being removed from a charger, a dead forklift battery exploded in an employee's face. The battery acid caused an eye injury.",1
"An employee was grinding glue off wheels on top of a corrugator machine. The employee's right index finger was caught between two of the machine's rollers, causing the amputation of the fingertip.",0
An employee developed an umbilical hernia after moving a bed. She was hospitalized.,1
"An employee tripped and fell over a crack on a cement floor, suffering a fractured pelvis.",1
"An employee was helping a forklift operator stabilize a load in the top pallet. The employee steadied the load while the operator adjusted the forks. The top pallet slipped and struck the employee in the right leg, breaking the tibial plateau.",1
"An employee's hand was caught between two conveyor belts. The employee suffered a crushed finger, two broken fingers, and a dislocated little finger.",1
"An employee was bending down to move a box so that it would not be run over by a forklift. The forklift ran over the employee's foot, breaking bones.",1
"An employee was de-stressing cabling on a flat pour due to a failed concrete test. The de-tensioning tool slipped and struck the employee, breaking the employee's left radius and causing a hand laceration.",1
"As a tree was being felled, one of its branches struck a second tree, broke loose, and sprung back. It struck the sawyer, causing broken ribs, a broken shoulder, and a facial laceration.",1
An employee was cutting a ductile pipe with a gas-powered chop saw. The saw kicked back and its blade lacerated the employee's chest. The employee was hospitalized.,1
"An employee was consolidating two pallets (on the second tier of some industrial shelving) into one, using an 8-foot ladder. While trying to get back onto the ladder, he fell to the concrete floor, breaking his right wrist.",1
"An employee was removing a clamp to replace a blind. As he removed the bolts on the clamp, the blind came free, striking him in the chin. He suffered a broken jaw, a broken nose, and facial lacerations.",1
A patient punched an employee in the face. The employee was hospitalized.,1
"An employee slipped on ice as he left his tractor. He fell, breaking his left hip.",1
"An employee was using an air gun to blow and remove crumbs from the drip pan of a conveyor. The conveyor belt struck the air gun, pulling its trigger handle into a fixed conveyor support and pinching the employee's right little fingertip between the handle and the conveyor support.",1
"An employee tripped and fell to the floor, suffering a broken left wrist and head and nose injuries.",1
An employee was bucking rivets on an aircraft skin when his finger was smashed. He suffered an infection and was hospitalized.,1
"While delivering mail, a mail carrier slipped on ice and suffered a broken right ankle.",1
"An employee was using water to put out a fire started by cutting torches. Some fuel ignited, burning the employee's face. The employee was hospitalized.",1
"An employee was on a shipping container when he lost his footing on a damaged section of the container. He fell, breaking his wrist and dislocating his elbow.",1
"An employee fell down a flight of seven metal stairs, breaking his skull.",1
"An employee was working from the fourth or fifth rung of a 10-foot ladder, checking for weak parts in a plaster ceiling. He slipped and fell, striking the back of his head against a concrete stair next to the ladder's base.",1
An employee slipped on ice while walking and fell. The employee was hospitalized.,1
"An employee was using a crane to lift the actuator out of a machine. The actuator fell onto the employee's right hand, breaking four fingers and the wrist and dislocating the radius. The employee was hospitalized.",1
"A field employee was walking to her car when she slipped on ice and fell to the ground, breaking her ankle in four places.",1
"An employee was working on a leveling drill rig that was tied down by a winch cable. The employee began pulling on the cable so that it could gain slack. The winch was engaged, pulling in the employee's hand. The employee's right little finger was amputated above the metacarpal.",0
An employee was removing a nail gun from his tool belt when it fired a nail into his right hip.,1
An employee was consolidating non-regulated material into a 55-gallon drum when there was a flash fire. The employee suffered second-degree burns to the face and hands and was hospitalized.,1
"Employees were conducting a training exercise on rescuing employees at a cell tower. One employee, acting as the victim, was being brought down by another. The descending apparatus came down to the ground too fast. In the fall (about 15 feet), the employee acting as the victim broke both ankles and needed to be hospitalized.",1
"An employee fell while climbing down a fiberglass ladder, landing on the ground and suffering a broken left hip joint.",1
"An electronic maintenance technician noticed that part of the tarp covering a radar dome had come off. He was standing on the bed of his pickup truck, pulling a rope attached to the tarp, when he fell off and landed on his back on the asphalt pavement. He suffered a skull fracture and brain hemorrhaging and was hospitalized.",1
"An employee was using a wrench to tighten a header bolt nut to a vertical load rack. The wrench slipped off the nut, and the employee's little finger was caught between its handle and a beam. The fingertip was amputated.",0
"An employee tripped and fell while leaving work, suffering a broken hip.",1
An employee fell on ice in a parking lot after stepping out of his struck. He suffered a head injury and bruises on the arm and leg.,1
"At 5:20 a.m., on February 18, 2019, an employee slipped and fell in a parking lot. The employee suffered a broken femur (directly above the knee) and was hospitalized.",1
"An employee was moving an MRI table when it started to veer the wrong way. As the employee was correcting its course, the employee's right little finger was caught between the table and a doorframe, causing a fingertip amputation.",0
An employee's left hand was caught between an assembly machine and the equipment being assembled. His index finger was broken and he was hospitalized.,1
"While walking into an office, an employee tripped on a step and fell, landing on his arm and chest. He broke two ribs and was hospitalized.",1
"An employee was removing the lid from a liquid tote of hypochlorous acid. Exposed to the vapor, the employee began experiencing shortness of breath and was hospitalized.",1
An employee was lifting a case of coffee when his artificial hip broke loose from his femur.,1
"An employee was walking in the parking lot when he slipped to the ground during a freezing rain event, fracturing two neck bones and requiring surgery.",1
"A load (concrete pile) struck an employee as it was being moved by a crawler crane, breaking the employee's pelvis.",1
An employee collapsed after lifting a boat and was hospitalized with a cervical spine injury.,1
"An employee fell while climbing over a scaffold's cross-braces. The employee landed on the ground, suffering a broken femur and a burst fracture of a lower back vertebra.",1
An employee fell from a rack or shelf to the ground about 6 feet below. He suffered a broken pelvis and minor head injuries.,1
"An employee unhooked a grain wagon from a pickup truck. The wagon began to roll, and the employee's right ring and middle fingers were caught between the concrete ground and a piece of wood being used to stop the wagon from rolling. The employee underwent a revision amputation.",1
"An employee was using a forklift on a rail dock. Its tires went off the dock, causing the forklift to lean; the employee's right hand was pinched between the forklift and a rail car, causing fractures and a laceration.",1
An employee was trying to retrieve a tray that had fallen in a stacker. The stacker cycled and the employee's right middle finger was caught between the tray and the stacker frame. The fingertip was partially amputated.,0
"An employee was climbing down a ladder on a stationary horizontal tank that was 10 feet above the ground. He fell off the ladder to the ground 6 to 8 feet below, injuring his back.",1
"An employee was trying to clear a jam in a machine. The machine cycled, pinning the employee's arm and breaking it.",1
"An employee was working on top of a trailer when he fell to the ground, breaking his hip and his arm.",1
"An employee entered a trench (about 7 feet deep and 7 to 8 feet wide) to install a fitting on a sewer main at the bottom. The trench's one vertical wall collapsed onto the employee, who suffered four broken ribs, a collapsed lung, and a broken shoulder blade.",1
A technician was inspecting an aircraft's wing. A vortex generator on the top of the wing struck and lacerated his left knee. He was hospitalized.,1
"On February 18, 2019, an employee slipped on pavement while walking in a parking lot. The employee fell to the asphalt, breaking a hip, and was hospitalized.",1
An employee and three other volunteers were lifting a children's climbing caterpillar (about 4 feet long) off two 2-inch posts. The employee's hand was caught between the caterpillar and a post. The tip of the employee's left middle finger was amputated.,0
"An employee fell to the ground, landing on his right leg and hip and suffering a contusion to the leg.",1
"An employee fell off a roof at a job site, suffering head, back, and foot injuries. He was hospitalized.",1
"An employee was trying to remove the obstruction from a jammed notched. Its blades caused the amputation of the employee's right first and second fingers to the second knuckle, and the third finger to the first knuckle.",0
An employee was handling a mud pump liner when it shifted. His left little finger was caught between the liner and the mud pump and the tip was amputated.,0
"An employee was operating a brake press in safe mode while changing a die on the press. The press cycled, breaking the employee's left arm.",1
"At 1:37 p.m. on February 19, 2019, a temporary employee was taking an empty 280-pound steel wire reel off a machine when he suddenly felt pain in his neck and back and fell to the floor. He was hospitalized, having suffered sprains/strains of ligaments of the cervical spine and a contusion of the left shoulder.",1
An employee was working with a plastic insertion machine when it cycled and caught the employee's right hand. The employee was hospitalized.,1
"An employee was moving material using a forklift. A spreader bar (being used to carry the material) fell on his right foot, causing a dislocation. The employee was hospitalized, requiring surgery.",1
"An employee was on top of a trailer inside a wash bay area, loosening bolts to the trailer's open dome lid. The employee was found on top of the tanker unconscious and was hospitalized for respiratory failure and cardiac arrest due to toluene exposure.",1
An employee's left ring finger was amputated after a pressurized airline ruptured in his hand.,1
"An employee was trying to transfer lumber from a bundle on a forklift into the bed of a truck. The lumber was frozen together, and another employee began to tap it with a hammer. The wood began to slide, and the first employee's hand was caught between the falling wood and a stack of wood. The employee's right ring fingertip was amputated.",0
"A chair slid out from under an employee as the employee sat down. The employee landed on the ground, suffering a tailbone injury (possibly a fracture). The employee was hospitalized.",1
"While completing a capacitor bank storage installation, an employee came into contact with live equipment and suffered electrical burns to the arms and torso.",1
"An employee was running a microwave bagging machine. A belt jammed; while the employee was fixing the jam, the employee's right index finger was amputated up to the first knuckle. The machine was guarded at the time.",0
"On February 19, 2019, an employee was lowering a purlin onto a rack using an overhead crane. The employee had one hand on the control pendant and one hand on the chain. When the purlin was placed, it rotated and pinched the tip of the left ring finger between the chain and the purlin resulting in a partial amputation.",0
"An employee was walking to his work vehicle when he slipped and fell on a small, icy hill, landing on his laptop in the chest area. He fractured ribs and suffered a collapsed lung.",1
"A truck driver was climbing down a fixed ladder on his truck when he fell, suffering a small head laceration. He was hospitalized.",1
"On February 19, 2019, an employee slipped on ice while walking to a building. The employee suffered a broken right tibia and was hospitalized.",1
An employee was unloading a trailer when he slipped on the wheel well inside the trailer. He fell to the trailer floor and broke his right leg.,1
"An employee was trying to retrieve a box behind some metal fence pickets. The employee was standing on a pallet between the pickets when a bundle of pickets (weighing about 1,020 pounds) toppled over on the employee's ankle, trapping it between bundles of pickets and causing multiple breaks.",1
"An employee was doing maintenance work on a dust collector blower, which was resting on an adjustable work station. The work station was lowered and the blower fell off the table. It struck the employee, breaking the employee's left forearm.",1
"An employee was installing decking. While reaching for a piece of the decking, the employee slipped and fell off the building to the ground, suffering two broken ribs and a skull fracture. The employee was hospitalized.",1
"On February 19, 2019, while sandblasting outside a tank, an employee tripped over the sandblaster hose and fell to the floor, suffering a broken left femur.",1
"An employee was leaving a car to go into work. The employee slipped on ice and fell, suffering sprains to the back and knee.",1
"An employee slipped in a kitchen and fell to the floor, striking his face and hand. He was hospitalized, having suffered lacerations requiring sutures, a concussion, and a cheekbone injury that required surgery.",1
An employee was helping move and sort material at ground level using a hydraulic crane. A bundle of angle iron beams pinched and amputated three of his fingertips. He was hospitalized.,1
"An employee was cutting a piece of wood on a table saw when the wood jumped back, dragging his left hand into the blade and amputating his ring and middle fingers.",1
"An employee was hit by a snag backed rail, suffering a broken left forearm and knee. The employee was hospitalized.",1
"An employee was boring a hole for a power/telephone pole using a utility truck with an auger bit. The employee finished the hole and was stowing the auger bit when the safety cable broke. The auger bit struck the employee, breaking his jaw and causing facial contusions.",1
"An employee slipped on ice and fell, suffering a broken hip.",1
"A valve in a piping system closed on an employee's left fourth and fifth fingers, amputating the tips.",0
"An employee had just unhooked and secured the hitch pin of a transporter. As the transporter pulled away, the pin slid down, causing the hitch to reattach to the transporter. The employee's foot was trapped between the moving transporter and a metal bollard, causing a broken right heel, an 8-inch laceration to the top of the right foot, and smaller lacerations to the inner ankle.",1
An employee was using a chop saw to cut blocks for manufacturing. The saw blade caught his glove and cut off the tip of his left thumb.,0
"On February 19, 2019, an employee was using a saw to cut extruded aluminum when the saw jammed up. The employee was attempting to clear the jam when the saw functioned and cut off the employee's right index fingertip. Gloves were worn at the time.",0
"On February 20, 2019, an employee was walking outside behind a maintenance shop when he slipped on ice. He fell to the ground and struck the back of his head. Suffering from dizziness and vomiting, he was hospitalized.",1
An employee was positioning a steel plate to be welded to the bottom of a railroad car. His left index and middle fingers were caught and broken between the plate and the car. He was hospitalized.,1
"On February 20, 2019, an employee was loading raw material into the vertical plunger system on an injection press when the plunger came down onto the employee's fingers, causing an amputation.",0
"An employee was troubleshooting an exhaust fan on a roof. The employee came into contact with the fan's impeller, suffering an amputation to the tip of the left index finger.",0
An employee was using a power trowel to smooth a concrete surface. The employee was overcome by carbon monoxide fumes.,1
"Employees were troubleshooting a slicer. Its timing belt had just been replaced when it pulled in an employee's latex-gloved right hand, resulting in an amputation of the middle fingertip.",0
An employee was using a bailer machine when it crushed his arm.,1
An employee suffered a laceration to the right leg on top of an elevator that was being serviced. The laceration required surgery.,1
"An employee was loading a gas tank on a conveyor belt to be taken to another station. The employee tripped on a metal cable (connecting a go/no-go gauge to the conveyor belt) and fell to the floor, suffering a broken right hip.",1
"An employee started to cut a thermowell (a 2-inch piece of pipe with a sensor inside) using a portable bandsaw. A flash caused minor burns to the employee's chin, neck, and wrists; the employee was hospitalized.",1
"An employee slipped and fell while climbing onto a trailer. He hit his left lower leg on the guardrail to a scale, breaking it.",1
"An employee was on a platform ensuring that all rails had been pushed in. A lining bar struck his mouth and head, breaking four teeth.",1
"An employee fell approximately 6 feet from a conveyor to a concrete floor, suffering multiple rib fractures and a concussion.",1
"An employee was carrying scrap wire near a rotating machine barrel. The spinning barrel caught the wire and pulled the employee's left arm into the machine, causing cuts, abrasions, fractures, and lost feeling/circulation.",1
"While installing an attic ladder in a home, an employee slipped and fell from the attic onto some shelving and a concrete floor. The employee suffered a facial fracture.",1
"An employee was waiting for the launched component (pig). The launch component was jammed in the pipe and when it released, his right arm suffered abrasions near the wrist and above the elbow.",1
An employee's left hand contacted a blower's belt and pulley amputating his left ring finger at the first knuckle.,0
"An employee was moving packages from a conveyor when a package struck her, breaking her left hip.",1
An employee slipped on ice while walking to a vehicle. The employee's head struck the asphalt parking lot surface; the employee suffered a head injury including internal bleeding.,1
"Employees were performing a drill pipe inspection using an x-ray/ultrasonic test. A forklift was picking up pipes; its boom pressed down on two joints of pipe, and when the pipes were raised they jumped off the pipe rack, striking and breaking an employee's left tibia and fibula.",1
"An employee was on an A-frame ladder, using a beam clamp to guide a truss onto a beam on a new home. The beam clamp broke and the employee fell about 6-7 feet to the ground, suffering back contusions.",1
"An employee was driving a tractor-trailer truck as it dumped a load of logs. The truck hit a bump and the trailer tipped over, taking the cab with it. The employee suffered bruising to the left shoulder and body.",1
"An employee was using a metal pipe with 1/2-inch tines to scrape the feathers off the side of a dryer. The force of the spinning dryer caught the pipe, which impaled the employee in the upper chest and passed through his shoulder. The force then pulled out the pipe and knocked off the lid of the dryer, sending the employee to the floor. He was hospitalized.",1
"An employee was manipulating a finished part by hand by sliding it across the work table when the metal part fell over, catching his right ring finger underneath it and resulting in a fingertip amputation.",0
"An employee was operating a survey boat when he slipped, fell, and hit his head, losing consciousness. The boat subsequently struck a channel buoy and sank. He was hospitalized for a brain bleed.",1
"An employee was loading materials onto a buggy. A 2-by-4 struck the buggy's gear shift, causing the buggy to move and pin the employee against a wall. The employee's leg was broken in two places.",1
An employee was using a pallet wrapping machine to wrap product on a pallet. He had turned the machine off and was at the bottom with the wrap when the pallet shifted and knocked him off balance. His thumb was pinched between the pallet and the machine; the tip was amputated to the first knuckle.,0
"A temporary employee was loading material into a projection welding machine when it was activated via the foot pedal, causing the welding machine pin to hit his finger. He suffered a right middle fingertip amputation.",1
"An employee was transporting a machine part using a forklift. As the forklift made a sharp turn, the employee's hand was caught between the forklift and a nearby assembly line machine and his little finger was crushed. The finger was amputated.",0
"Employees were cleaning out tubing to set a packer, using a tool that screwed onto a joint 25-30 feet in the air. The tool came unscrewed and fell, breaking an employee's pelvis on the left side.",1
"While skiing with a guest, an employee hit a patch of soft snow and fell forward in a twisting motion. The employee suffered a fractured tibia and fibula and was hospitalized.",1
"An employee was working near the boom of a wheel loader. Hydraulic pressure was lost and the boom came down on him, pinning him against the loader. He suffered head and arm injuries and was hospitalized.",1
"An employee was holding a piece of rebar while another employee was cutting it with a cut-off saw when the saw kicked to the side and into the employee's arm, causing a laceration to the right forearm. The employee was hospitalized.",1
"An employee was working from a ladder in a 20-foot-deep press pit, fixing a sensor on the press. He fell from the ladder to the ground (at least 12 feet below) and broke his foot.",1
An employee was preparing to nipple down a blowout preventer. The fingers on his left hand were caught between a metal door and the latch; the middle and ring fingers were amputated at the first joint.,1
"While pulling a pallet off a roller bed conveyor, an employee tripped over a ground-mounted forklift guardrail. The employee fell to the ground, suffering a broken right hip. The employee was hospitalized.",1
"While stepping out of a company van, an employee slipped and fell to the ground, suffering a broken hip or upper leg. The employee was hospitalized.",1
"An employee was entering the building to start work. The pads of her crutches, wet from rain, slipped on the tile floor, causing her to fall onto her right side and shatter her right hip.",1
An employee was on an 8-foot stepladder when one of the spreader bars broke causing the ladder to twist and turn throwing the employee off the ladder. The employee suffered a broken right arm.,1
"At about 2:00 p.m. on February 21, 2019, an employee was descending a rolling ladder on the first floor of a specialty mill. The employee fell from the last step to the ground, suffering multiple fractures to the left wrist. The employee was hospitalized.",1
"An employee was operating a skinner machine and was guiding a ham when the ham slipped, causing the employee's skinner glove and smock sleeve to become caught in the roll/skinning blade. The employee's left elbow was de-gloved as a result.",1
"On February 21, 2019, an employee was using a chain hoist to lift a mechanism housing. The housing broke free of its eye bolt and landed on the employee's left foot, amputating the big toe.",0
"Two officers were inspecting an SUV that was pulling a trailer. An officer asked the driver to pull forward a little while the injured officer was inspecting the trailer hitch area. As the vehicle moved forward, the injured officer was knocked down and became wedged between the trailer driver's side tire and axle and dragged approximately one foot before the vehicle stopped. The injured officer was hospitalized for a fractured lower left leg that required surgery.",1
"An employee was repairing a furnace at a job site. While the furnace was being lifted, it struck him in the leg, breaking his femur.",1
An employee slipped while getting off a flatbed truck. His left ring finger was caught on the truck and amputated.,0
"Two employees were acting as spotters while a forklift moved pipe joints. One of them, on the left side of the forklift, was laying down a tagline when a pipe began to roll. It struck and broke his leg.",1
"An employee was in a flooring mill, clearing a board from a belt. The belt caught his hand, resulting in the amputation of two fingers.",0
"An employee was on a scissor lift 8 or 9 feet from the ground, installing some blast chill fans for a new ammonia refrigeration system. The employee fell to the ground, hitting his head.",1
"An employee was assisting a co-worker to straighten lumber in the saw mill stacker. His foot was caught in the chain and sprocket causing severe tissue damage, a hairline fracture to the heel and a damaged tendon.",1
An employee was repairing the gearbox on a machine at a client location. He slipped or tripped and fell backwards resulting in a laceration on the back of the head and bleeding in the brain.,1
"An employee was working from a 10-foot ladder, cutting into a copper line. A blast of pressurized air was released from the line and the employee fell, landing on the concrete floor 8 feet below. He suffered injuries to the head, back, and spine.",1
"An employee was operating a manual table bender. His left thumb was caught between the backup roller and the bar. The tip was crushed, leading to an amputation.",0
An employee was clearing a blockage of the top photo eye of a baler. A shear inside the hopper caused the amputation of the employee's right index fingertip.,0
Two employees were involved in an altercation. One employee's injuries required hospitalization.,1
An employee was cleaning a slitter machine with a rag. The rag got caught on the rollers pulling his right hand into the machine. The employee sustained a degloving injury to the hand and a right thumb fracture.,1
An employee was slipped on ice in the parking lot and fractured her right hip.,1
An employee was hand threading new material into a rolling mill when his glove got caught on the threaded material and pulled into the rollers causing a left index fingertip amputation.,0
"An employee was transferring from their wheelchair into their car, slipped and fell. The employee suffered a bilateral fractured elbow, a broken nose and a cut on the nose.",1
A roofer fell from the roof and was hospitalized for a head injury. It was raining at the time of the incident.,1
"An employee tripped on the edge of a ramp in a parking lot, falling face first between the wheel and the wheelhouse of the truck that was on the ramp. The employee's shoulder struck a step on the truck, and the whiplash action caused tingling and restricted movement.",1
"An employee was performing quality checks on a press with a built-in stair system. As she came down the stairs, she fell to the concrete floor, breaking her left ankle and lower leg. She was hospitalized, requiring surgery.",1
"A maintenance employee was spreading ice melt outside of the building when the employee slipped and fell to the ground, fracturing three ribs.",1
"An employee slipped on ice in a parking lot, falling to the ground and breaking her right ankle.",1
"A production operator was cleaning a tank. He had just set aside a bag of caustic soda beads (after adding beads to the tank for the necessary cleaning solution) when boiling water erupted from the tank, burning the left side of his back, the back of his left leg, and the back of his left arm.",1
"An employee was working on piping products using a flanging and finishing machine. His left hand was caught between the jaws of the machine and the product, causing the dislocation/fracture of the middle and index fingers.",1
"A maintenance employee was repairing a guard on a machine. When he went to remove the guard, the machine's belt caught and severed the tip of his thumb. The machine was turned off and locked out at the time.",0
"On 2/21/2019, two employees were working to repair/resurface a 120-inch, five blade, four-ton wheel propeller inside the propeller repair shop at a shipyard repair facility. The propeller was just removed from the straightening press and the employees were in the process of moving it over to a floor stand so they could weld it, grind it and apply cosmetic treatment to it. They used an under the hook hoist system to move the propeller over to the floor stand. Once in position, they attempted to place the propeller on the stand by lowering it down onto the top of the stand and then slacking the chain. However, it would not sit flush on the stand and both agreed that they needed a different stand. One employee went to get a different stand, heard a crash and saw that the propeller had started to slide off the stand with the hoist chains now tight. The second employee suffered a deep laceration/fracture to their left leg.
 ",1
"An employee was using a stand-up forklift in a warehouse. The forklift backed into a concrete pole and the employee stepped off at impact. As the employee stepped back on with one leg, the forklift moved and caught the employee's other leg against the pole.",1
"An employee was helping a coworker cut pine boards with a cutoff saw. The sawblade caught his gloved left hand, amputating his left index and middle fingers just behind the knuckles.",0
An inmate stabbed an officer in the abdomen with a knife.,1
"An employee was walking alongside a forklift loaded with frames. The frames began to fall, and the employee tripped and fell while moving to avoid them. The forklift then ran over the employee's foot. The employee was hospitalized.",1
An employee was moving a welder's cable out of the way when the cable shocked his right hand and arm.,1
"On February 21, 2019, an employee was guiding a load of steel that was being moved from a flatbed truck to the ground by a crane. As the load was about four feet from the ground, a rigging failure caused the steel to buckle and strike the employee. The employee was launched into the air about 15-20 feet. The employee sustained a broken arm, collar bone and pelvis.",1
An employee sustained an amputation to his left ring finger while working on a drilling rig.,0
An employee was turning off a conveyor belt when his hand contacted the timing belt. His fingers were crushed and the tip of his left ring finger was amputated.,0
"At about 11:00 a.m. on February 21, 2019, an employee was retrieving a steel channel beam from a stack. The employee pried two steel channel beams apart with a 12-inch pry bar to attach a lifting device. One beam slid off the other, and the employee's right ring fingertip was pinched between the beams and was amputated.",0
"An supervisor was performing a safety observation of another employee who was installing an electric meter. The supervisor slipped on a wet walking surface and fell, breaking his right arm against a railing. He was hospitalized, requiring surgery.",1
"An employee fell more than 12 feet to a concrete floor, suffering broken bones and a concussion. He was hospitalized.",1
"An employee was driving a PIT when the employee lost control of the PIT. The employee's left foot slipped, and the left leg became pinned between the PIT and a rack. The employee suffered a severe ankle laceration and a broken heel.",1
An employee suffered a finger injury while using an alligator shear.,1
"While tracking people through ranchland, an employee suffered heat stress, dehydration, and cramping.",1
An employee was conducting product tumbler cleaning operations when the tumbler struck the employee's head and face.,1
"While leaving a building, an employee slipped on hard-packed snow on a shipping/receiving ramp. The employee fell, suffering a broken hip and femur.",1
"At about 1:00 a.m. on February 22, 2019, an employee was using a grinder when it caught the drawstring of his sweater. It pulled up the string and cut the employee's neck.",1
A security guard was injured while trying to break up a fight between students. He was punched and kicked and hospitalized for elevated blood pressure and heart rate.,1
"An employee was cleaning a double pouch sealant machine. The blade caught the employee's finger, amputating the tip.",0
"An employee was refueling a tracked excavator. The employee slipped and fell off the excavator to the ground injuring their back, shoulder, and head.",1
"An employee was walking out of the building at the end of a shift, tripped on the door sill and fell to the ground breaking the left arm.",1
"An employee slipped on snow-covered ice, suffering an injury to his left foot/ankle.",1
"An employee was performing a re-bend on a press brake. When the brake was actuated, the part being bent rotated up, pinching the employee's right thumb against the upper tooling and severing the tip.",0
"A roofer fell off a roof to the ground 20 feet below, suffering broken wrists and a puncture injury to the head. He was hospitalized. Fall protection was not being worn at the time of the incident.",1
"An employee was walking down a hallway when she tripped and fell to the floor, breaking her right knee.",1
An employee was checking the belt on the infeed conveyor of a palletizer. The belt began to move and pulled the employee's right middle finger into the running palletizer resulting in a fingertip amputation.,0
"An employee was using a powered pallet jack to move a pallet of material. The jack backed into a metal post, pinching off the tip of the employee's right ring finger.",0
"As a forklift driver was closing a gate, it caught the driver's left thumb against the forklift frame. The thumb was amputated.",1
"On February 22, 2019, an employee was finishing a repair on an HVAC unit when a belt and pulley (on a different piece of equipment) caught the employee's left hand. The employee's left index fingertip was amputated.",0
"An employee was installing a metal roof when he slipped and fell on the roof. When the employee fell, he hit the edge of a metal roof panel with his right wrist and suffered a laceration that cut tendon and ligaments, requiring surgery.",1
An employee was operating a stand up forklift and attempted to go through an elevated door way. The top mast of the forklift struck the brick wall of the doorway causing the forklift to tip over and land on the employee's foot. The employee was hospitalized for a foot injury requiring surgery.,1
"An employee was operating a bucket truck picking up road signs along the side of the road at the end of the day. The employee was on the back of the truck strapping down the signs. When he stood up, he struck his head on the bottom of the bucket, lost his balance, and fell approximately four feet off the side of the truck to the ground breaking the lower left leg.",1
An employee smashed his hand between a block of wood and a metal bang board resulting in a partial amputation of the left middle finger.,0
"An employee stepped into the back of a trailer parked in a store's dock area. The truck moved forward and the employee fell out, suffering a right hip injury.",1
"An employee was cleaning a moving table top (carrousel) on a concrete pipe manufacturing machine during set-up. As the employee went to clean the table skirt, his rag and a finger were pulled into the wheel. His right middle finger was crushed and the fingertip, up to the first knuckle, was surgically amputated.",0
"An employee was removing bacon from the oven. The pan hit the door causing grease to spill and burn her arm, neck, chest and stomach. The employee was hospitalized.",1
"On February 22, 2019, an employee slipped on an ice patch in a parking lot and fell, hitting his head and breaking a finger. He was hospitalized, suffering from a subdural bleed.",1
An employee was walking to his unit. As he went around a corner he was struck by a hostler truck resulting in a left knee injury.,1
"A material handler was picking components in the receiving storage area between rows C & D on the south end of the storage area. As the material handler was scanning and loading components onto a cart, a forklift operator was loading components onto the top level rack in row E, adjacent to where the material handler was picking parts. While loading the parts onto the rack, the pallet that was in row D in the same location began to shift and eventually fell from the top level onto the material handler causing fractures to the employee's neck and spine.",1
"A temporary employee was working on a roller machine when it caught his right glove and pulled in his hand. He was hospitalized, undergoing surgery, and lost the tip of a finger.",1
"A falling cement block struck an employee on a job site, causing a fractured skull and a laceration.",1
"An employee collided with a guest while skiing, suffering a broken leg.",1
"An employee was gathering shopping carts from a parking lot. She slipped and fell to the icy concrete pavement, breaking her right wrist and suffering contusions to the tailbone area and right knee.",1
"An employee was assisting a client in their home when she lost her footing and fell, fracturing two discs in her back. She was hospitalized.",1
An employee was performing rigging operations at a well pad. He was walking on a containment pad walkway that was slippery from a recent rain/snow event. He slipped and fell. He attempted to catch himself during the fall and fractured his left wrist. He was hospitalized.,1
"An employee was leaving a front end loader when the wind caught the loader's door, causing the employee to fall to the cement curb about 5 feet below. He suffered broken ribs and a head laceration and was hospitalized.",1
"At 10:45 a.m., on February 22, 2019, an employee was working at an extruder line, clearing accumulated plastic between the guillotine blade and pulley belts. The timed chopping cycle took place, amputating the employee's left index finger above the first knuckle. The employee was hospitalized, undergoing surgery.",0
"A driver was exiting his semi-truck, missed the last step and fell to the ground fracturing a hip.",1
"An employee was repairing a weigh bar on a feed truck. His left hand was pinned between the truck box and frame, causing the amputation of his ring finger and the top of his little finger.",1
An employee was emptying a bag of collected dust from a dust collection system. The bag and the employee's hand were pulled into the airlock hopper valve. The employee's hand was lacerated.,1
An employee was drywall mudding the back corner of a tub. She slipped on some mud that had fallen on the floor and dislocated her ankle. She was hospitalized.,1
An employee got two metal chips imbedded into his toe. The toe was surgically amputated.,0
"An employee was sitting in her chair talking with another employee. When she stood up, she tripped over the leg of the chair and fell breaking a hip.",1
"An employee was traveling through a facility on a stock picker. The stock picker began to tip during a turn, and the employee's left arm struck a rack upright support. He suffered fractures to the arm and was hospitalized.",1
An employee was attaching a crane hook to the mold with his left hand. The hook twisted and crushed his index finger.,1
An employee was cleaning shelving inside the safe room. The employee climbed a ladder and stepped onto a countertop to clean the shelving. When stepping down from the countertop to the ladder the employee fell and fractured her hip.,1
An employee's finger was caught in shelving and  was hospitalized after sustaining a partial finger amputation.,1
"An employee on a 6-foot ladder, cleaning an external dryer vent that was about 11.5 feet above a patio. The ladder tipped over and the employee fell; his head hit the patio furniture and then the concrete patio itself, and he briefly lost consciousness. He was hospitalized.",1
"An employee fell to the ground, suffering a broken wrist and hip socket.",1
An employee was transferring from an aerial lift to a scaffold platform and fell approximately 50 feet to the ground. The employee suffered two broken legs and the loss of teeth.,1
An employee was cleaning saw dust in the basement near a vibrating conveyor and suffered a partial amputation of the right pinky finger just above the first knuckle.,0
An employee fractured her tibia and fibula while skiing down a run.,1
"On February 23, 2019, an employee was removing dust from the sensor of a recycling system. The fingertips on the employee's right hand came into contact with the paddle blade, causing amputations to the middle and ring fingers.",0
"An employee was walking toward his car in a parking lot. He fell to the ground in a grassy section, suffering bruises to the left hip and head.",1
"An employee was changing filter bags on a pan water filter. As the employee was form-fitting the filter to the basket, 200-degree water flowed into the employee's glove, causing second degree burns (and a subsequent infection) to the employee's left wrist/hand.",1
"An employee was moving a bucket and mop when he slipped on a waxed floor and fell, cutting his face on a conveyor lever.",1
An employee was performing maintenance on an industrial printer and suffered the amputation of his right index finger from the knuckle.,1
"An employee was trying to stab a joint of tubing to make a connection. The string of tubing knocked the employee off the rig floor to the ground, causing multiple fractures.",1
"An employee was walking in the dining room, slipped and fell breaking a hip.",1
An employee was operating a press brake. The parts were being held in place by a magnet near the point of operation to allow for a hands free process. The employee's right hand was caught in the point of operation as the press engaged causing a middle fingertip amputation.,0
An employee walking in the parking lot slipped on ice and fell breaking his ankle. The employee was hospitalized and required surgery.,1
"An employee was using a bone-in saw to cut a piece of meat. The saw severed a tendon on the top of the employee's right hand, requiring hospitalization and surgical repair.",1
"At 10:30 a.m. on February 23, 2019, an employee of Starfire Corporation sustained a laceration of his leg and burn injuries to his back from the premature ignition of a fireworks shell as he was loading the shell into the mortar tube in preparation for a fireworks aerial display.",1
An employee was walking through a door. Another employee pushed the same door and hit her on the head. The employee suffered a seizure as a result.,1
An employee was placing finished goods in the back hallway and was struck by a forklift. The employee suffered a lower left leg injury and a fractured right toe.,1
An employee was pushing a product through a band saw and suffered a severe laceration to her left pinky finger.,1
An employee was rotating a compressor flywheel when the first digit of his right index finger was forced against the shaft of the flywheel locking device.,1
"On February 24, 2019, while adding a chemical to a 300-gallon reactor, an employee was exposed to trifluoromethanesulfonate ester and had an allergic reaction. The employee was hospitalized.",1
"An employee was operating a pallet jack, lost balance and fell off the pallet jack. The employee was pinned against a wall and suffered a broken foot.",1
"An employee was outside a trailer rolling down its roll-up door. His right middle finger was caught in the door's ridge panel as the door came down, causing an amputation at the first knuckle.",0
An employee was feeding bran into a rice mill machine when it became clogged. The machine was turned off. It was still turning as the employee attempted to unclog it and his left right fingertip was amputated.,0
"An employee was opening a horizontal manway on top of a drum using a jack. When the manway opened, the employee's right index finger contacted a valve on the manway causing a fingertip amputation.",0
An employee was bitten by a cat and hospitalized for an infection.,1
"An employee was climbing a light tower on stage during the loadout of a show. The tower began to tip and the employee jumped so it would not fall on him. He landed on the stage more than 10 feet below, suffering broken ribs and a punctured lung.",1
"On February 25, 2019, at approximately 11:00 a.m., an employee lacerated their left forearm on a grinding wheel. The employee was cutting a 2"" pipe for replacement.",1
An employee broke his leg while descending from a belt loader to the ground 29 1/2 inches below. He was hospitalized.,1
"After a chipper knife change in the wood yard, employees were rotating the chipper disk to measure the knife clearances. To perform the measurements, the chipper disk is manually rotated to each knife location. To rotate the chipper disk, the injured employee placed his right foot on the card breaker for leverage. The employee's foot slipped and was caught between the card breaker and the feed chute resulting in an avulsion to the top of the foot and two fractured toes. The employee was hospitalized.",1
An employee collapsed while using a ladder in the orange grove. The ladder up against the power lines was seen sparking.,1
An employee was working on a paving job and was pinned between a paving machine and a dump truck resulting in fractures to the left femur and both ankles.,1
"A derrickman was trying to latch a stand of drill pipe at the derrick board. The stand pulled him off the board, pinning his left forearm against the safety gate and breaking it.",1
An employee was struck by a forklift that was backing into position. The employee suffered a fractured lower right leg.,1
"An employee was cutting a band from a bundle of 8-inch sewer pipe with a gas-powered chop saw. The saw's diamond blade struck the employee's lower left leg, cutting it and breaking the tibia. The employee was hospitalized.",1
An employee was operating a stand up forklift and contacted the closing brackets on the corrugated baler machine. His left leg was caught between the forklift and the baler causing a fracture and laceration to his ankle and foot. The employee was hospitalized.,1
"An employee suffered a crushing injury to the right hand and arm, broken ribs and lacerations to the arm when his right hand was caught in the cable and drum while troubleshooting a winch.",1
An employee slipped on ice and fell breaking an ankle.,1
A security officer sustained a lumbar strain while taking a patient out of restraints and was hospitalized.,1
An employee suffered amputation of his right pinky finger while working on an oil rig.,0
A forklift operator's left leg was pinned between the forklift and a racking system.,1
"A truck driver was unloading an auto from the lower level of an auto transport trailer. He fell about 40 inches to the asphalt, suffering lacerations to his left hip and elbow and a fractured pelvis.",1
"An employee was conducting a car check in a snow packed parking lot when he turned or twisted his body and fell to the ground. As a result, the employee suffered a spiral fracture of the left tibia.",1
"An employee was in a weld shop, using a powered metal shear. The employee's fingers were caught in the shear point of the equipment, which amputated the tips of three fingers on his left hand and amputated his right middle finger to the knuckle.",0
An employee's left hand and right leg were burned by hot plastic when it spilled from an injection molding machine. She was hospitalized.,1
An employee was working on the bun molder machine and suffered a left thumb amputation when it was caught in the machine's belt and pulley.,0
"An employee was walking into work, slipped on ice and fell in the parking lot. The employee fractured her right hip.",1
An employee was clearing snow in the parking lot with a snow blower. The employee slipped and fell breaking his tibia.,1
"While picking up repair parts at a local distributor, an employee slipped and fell on an icy sidewalk. The employee's left leg was broken.",1
"At 7:45 a.m. on February 25, 2019, an employee was working as a well tender when he suffered a head injury.",1
An employee was sweeping around metal roofing beams when a metal beam collapsed onto the employee's foot fracturing it.,1
An employee was painting from a bakers scaffold. The scaffold shifted and the employee fell approximately 6 feet to the floor below fracturing their lower back.,1
An employee slipped and fell on icy ground while unloading a down hole pump off of a trailer. The employee sustained a fractured hip.,1
"An employee was riding on the back step of the sanitation truck. When the packer cycled, his right index finger was amputated.",1
"A framing contractor was standing on top of a concrete podium deck on the second floor, working on framing in that area. As he was trying to move a wall, he slipped and fell approximately 10 feet to the first floor, injuring his wrist and lacerating his nose and upper lip.",1
"An employee was picking up debris from a lawn when a tree snapped and fell on her, breaking her knee and injuring her back. She was hospitalized.",1
An employee was operating the manual fish skinner. The employee's glove was caught in the skinning device and the side of her right pinky finger was skinned. Her hand then rotated resulting in a laceration to the top of her right hand.,1
"An employee noticed a blockage in an auger system while delivering grain to an offsite customer. The auger caught her hand against the side of the trough, causing the amputation of the tip of her little finger.",0
"An employee was helping to free a stuck shot tip and was struck by the automated ladling system. The molten metal caused second and third degree burns to his right shoulder, back, neck and face.",1
An employee was cutting wood material with a table-mounted radial arm saw. The saw blade amputated the employee's thumb.,0
"An employee was moving a plastic bead box weighing about 5 pounds. He tripped over a pipe stub and fell, landing on his tape measure. He suffered a broken left leg that required surgery.",1
"A carpenter was on top of a one-story warehouse, moving roof panels during roof installation. He fell through a skylight and suffered rib fractures. He was hospitalized.",1
An employee was guiding the first joint of casing into a conductor in a cellar area. A centralizer (secured around a pipe) was pushed through the rotary table. The centralizer slid down the pipe and caught the employee's left ring finger against the collar on the casing. The employee's left ring fingertip was amputated.,0
"While changing a propane tank, an employee was struck by a forklift. The employee suffered significant swelling on the right leg from the hip to the knee and was hospitalized.",1
"While walking out of a stock room, an employee tripped on the rubber transition piece between the concrete floor and a carpet. The employee fell, suffering a broken left hip.",1
"An employee was using a brake press to flatten a part. When the machine cycled, his right thumb was pinched between the part and the ram and the thumb tip was lacerated.",1
"A tree blew over in the wind, striking the arm and head of a postal worker who was delivering mail. The postal worker suffered fractured vertebrae.",1
"An employee was taping drywall on stilts. The employee tripped on an electrical cord and fell to the ground, suffering a broken kneecap.",1
"An employee tripped and fell while coming out of a walk-in refrigerator, suffering six broken ribs.",1
"An electrician was taking out an uninterruptible power supply (UPS) system. One of the systems was set on the ground by an aerial lift. While the second system was being set on the ground, the employee was walking between the two systems. One of the units fell on him trapping him between the two systems. The employee suffered an ear injury, a broken jaw and a broken leg and was hospitalized.",1
An employee was troubleshooting the actuator on the metal detector in-line unit. The valve was stuck open. The employee's right index finger was inside the valve when the pneumatics were activated and the ball closed on his finger. The fingertip was surgically amputated.,1
"On February 24, 2019, an employee was assisting a resident and fell. The employee's leg was caught between the resident, mattress and floor resulting in a fractured tibia.",1
"On February 25, 2019, at approximately 11:30 AM, an associate was carrying an empty pharmacy tote through an open doorway. The tote struck the door causing the associate to fall backwards onto her hip and leg. She was hospitalized.",1
"An employee was loading a telehandler onto a flatbed trailer to transport it to the next jobsite. The employee was backing the telehandler off the trailer to realign it. While backing up, two tires slipped off the trailer causing the telehandler to tip over on to its side and fall to the ground. The employee sustained a broken pelvis, bruised ribs, and a head laceration. The employee was hospitalized.",1
"While securing a load of steel plates with chains and binders, an employee suffered lacerations to the head, a skull fracture, and a concussion.",1
"On 2/25/19, an employee was operating a horizontal band saw and injured their left index finger. The employee's finger was later amputated.",1
"An employee was reaching to turn off the TV in a patient waiting area, fainted and fell breaking both ankles.",1
"On February 26, 2019, at approximately 1:00 p.m. a tool maintenance employee was prepping an isolation tool when a cup-shaped portion of the tool became caught on a bracket. The employee attempted to free the cup and the employee's left middle finger was caught in the hole of the cup and amputated.",0
"An employee was unloading freight from one trailer and loading it into another. As the employee was unhooking the straps bracing the freight, a skid broke loose and struck the employee on his right leg fracturing the fibula.",1
An employee was descending a 24-foot extension ladder when the ladder began to fall. The employee rode the ladder down and landed on his feet on the concrete ground resulting in a fracture to his right foot and a vertebra.,1
"On February 26, 2019, an employee fell from the lift gate of a delivery truck resulting in hospitalization for a fractured hip.",1
An employee was punched in the face by a temporary employee. The employee sustained a fractured jaw.,1
"On 2/26/2019, an employee fell approximately 3 feet off a truck and was hospitalized for a broken hip.",1
A maintenance technician was replacing a 65-inch motor belt in a grinder mixer. The belt was installed behind a gear box that drove two chains via sprockets. The employee's right arm was inside the motor compartment when it suddenly started to turn. One of the chains amputated his right arm after wedging it against the sprocket.,1
Employees were building the tracks for the kiln. A rail section weighing approximately 900 lbs. fell off the support table onto the employee's right leg breaking his femur.,1
A temporary employee was cleaning up scrap paper off the floor. He placed his hand on the conveyor to stabilize himself and his right pinky finger was caught in a crankshaft resulting in amputation.,0
"An employee was found unresponsive near a heat recovery steam generator, on his knees with blood around his nose and a bump on the head. He was hospitalized, having suffered a traumatic brain injury, a subdermal hemorrhage, multiple facial fractures, and lumbar and thoracic fractures.",1
"An employee was inspecting a compactor and saw an electrical wire near the compactor. The employee then suffered a panic attack involving shortness of breath, dizziness, and heart racing.",1
"An employee was caught between a cart and a powered industrial vehicle while bending down. The vehicle's handle pinned the employee's left arm against the cart, breaking the arm and wrist.",1
An employee was operating a press brake and suffered a crushing injury to the left hand.,1
An employee was hospitalized after experiencing trouble breathing and chest pain due to pesticide and carpet cleaner used in the facility.,1
An employee was stocking pallets of merchandise in an aisle using a manual pallet jack. He tripped over the pallet jack and fell backwards fracturing his arm.,1
An employee was handling a sheave on a rolling cart. The sheave shifted and crushed his left index finger between the cart and the sheave.,1
"An electrician was moving a food warmer table with the help of his co-worker. The table slipped out of his grip and the metal lip at the edge of the table lacerated his left index finger. The employee was wearing heavy, vinyl gloves at the time.",1
"At 9:40 p.m., on February 26, 2019, an employee was performing scheduled maintenance on a small parts folder. As he made an adjustment, his socket wrench touched an energized 480-volt wire, causing a shock/arc flash that burned his right hand/thumb. The machine was not locked out at the time.",1
An employee was adjusting/fixing the cover on the bucket of the truck while it was not in use and fell from the bucket truck. The employee sustained a head injury.,1
"An employee was on an extension ladder, using a metal crowbar to remove shingles from near a second-story window on an outside detached garage. The ladder slipped from under him and he fell, landing on the black asphalt driveway in front of the garage. He suffered an injury to his back and was hospitalized.",1
"At 10:05 a.m., on February 26, 2019, an employee was air operating an actuator. A valve that was lying/sitting on a table/work bench shut on the employee's right index finger, amputating it.",0
An employee was adjusting the tension on a belt on a hamper conveyor system. The belt amputated the tip of his right little finger.,0
An employee suffered asthma exacerbation as a result of exposure to electroencephalography glue.,1
"An employee was walking across an icy parking lot, slipped and fell breaking the fibula and tibia.",1
An employee was flushing out the coil tubing due to a frozen line. He started hammering on the line and it broke apart. He was struck in the chest by the high pressure hose.,1
"A letter carrier was delivering mail when he slipped on ice and fell, breaking his left ankle.",1
"While sorting mail, an employee tripped over a file box that was sitting in front of the mailboxes. The employee fell, suffering a broken right hip.",1
"On February 26, 2019, at approximately 12:15 p.m., an employee at Plaspack U.S.A., Inc. was cleaning the rubber rollers on a knitter machine when a chain and sprocket located above the floor grabbed her clothes and pulled her into a rotating shaft bracket. The employee sustained crushing injuries to the top of her legs and a puncture wound.",1
An employee was in his vehicle in the company parking lot when he was shot in the hand and leg by an individual from his personal life. The employee was hospitalized.,1
An employee was descending steps from the break room to the production floor. She fell on the third step from the bottom and suffered a broken left leg and a dislocated left ankle.,1
"An employee was receiving 2-by-4s from a lower level onto a mezzanine. The employee tripped on a lifting strap and fell about 18 feet from the mezzanine to the ground, suffering a broken pelvis and back injuries.",1
An employee was carrying a sheet of plywood while walking on 2x6 rafters. He lost balance and fell approximately 10 feet to the concrete ground fracturing a hip.,1
An employee fell from an extension ladder while painting. He suffered wrist and face injuries and was hospitalized.,1
"A driver was unloading a bundle of steel tubing. As the employee was pushing loose product back into the bundle, tubing fell from the bundle, hit the ground, and bounced into the driver's leg. The driver suffered a contusion to the right calf.",1
An employee was cutting a steel tube using a band saw and lacerated the top of their left hand requiring stitches. The employee was hospitalized.,1
An employee was struck on the back of the leg by a forklift outside of the garden center on the east side of the building. The employee suffered an ankle injury as he fell to the ground.,1
An employee was using a 24-foot extension ladder to install gutters. The ladder kicked out and slid down the residential home's siding to the ground. The employee fell 15 feet and broke both wrists and sustained a head laceration requiring stitches.,1
An employee was working on a high pressure line. The fitting gave way and the line blew off striking his right ring finger causing two fractures and a laceration.,1
"An employee fell on a floor, breaking her right hip. She was hospitalized.",1
"An employee exited the car to enter work, slipped on ice in the parking lot and fell fracturing their pelvis in multiple places.",1
An employee was shoveling snow and slipped and fell on the ice fracturing the lower right leg.,1
An employee suffered a fingertip amputation while trying to remove frozen milk from a valve.,0
The rig crew was topping off the well with fluid when the operator noticed that the gauge was reading 0 psi. The rig operator leaned over the well head to check for flow inside the well head when an ice plug that had formed released from the well head and struck the employee in the face. The employee suffered injuries to his face and eyes.,1
A bolt broke on a tow hitch. The injured employee placed his finger in the hole to clear the broken bolt when another employee lifted the hitch to move it up and amputated the injured employee's right index fingertip.,0
An employee was walking in the back room to retrieve supplies for the deli. The employee tripped on a baler wire as it was being fed into the baler. The employee fell and suffered a fractured left hip. The employee was hospitalized.,1
"An employee was performing routine maintenance on a coating machine. A stuck idler roll sprung loose, jamming three of the employee's fingers between the idler roll and the frame of the machine. The employee's middle finger was injured.",1
An employee was sliding the tandems on a transport truck and caught his left middle finger in a pinch point resulting in a fingertip amputation.,0
An employee was repairing a gas system when a flash fire burned multiple parts of his body.,1
"On February 27, 2019, an employee was conversing with another associate, turned, tripped, and fell on a nearby air hose resulting in a contusion to the left side of the rib cage and hospitalization.",1
An employee was operating a jack and crushed his foot and ankle between the jack and a pallet.,1
"An employee used the mandrel as a lift onto the catwalk. The employee missed the catwalk and rode the mandrel all the way around to the other side, striking his head on the steel beam at the bottom of the mandrel assembly. The employee suffered a skull fracture.",1
"At 11:01 a.m., on February 27, 2019, an employee was walking from a client's house up a hill to a parking lot. The employee slipped and fell down the hill, suffering a broken left tibia and fibula. The employee was hospitalized, requiring surgery.",1
"An employee was climbing down a ladder in a storeroom when he fell to the floor, breaking his right leg.",1
An employee fell approximately 20 feet while handling construction debris. The employee suffered a broken arm and head lacerations.,1
"An employee was case picking when she tripped over a piece of wood sticking out of a pallet on the floor. She fell to the concrete floor, suffering broken vertebrae.",1
"An employee was on a knee cart. Its handle grip came loose as she turned and she fell to the tiled floor, breaking her lower right tibia and fibula.",1
An employee slipped/tripped and fell in the outdoor yard of a distribution center. The employee suffered a head and back injury and was hospitalized.,1
"An employee slipped on an icy landing and fell, suffering an injury to the right leg. The employee was hospitalized.",1
An employee was cleaning a concrete pump hopper and suffered multiple finger amputations when their hand was caught in the pump intake.,1
An employee had just stepped out from behind a tall pallet of product when a forklift ran over his left foot with its rear tire as it backed up. His foot was broken.,1
Employees were operating a bending machine when an employee's left middle finger was pinched between the metal panel and the top of the tooling portion of the machine. The fingertip was severed.,0
"An employee was repairing a gas leak at a restaurant. Flames from a grill ignited the gas and the employee suffered second degree burns on the hands, face and ankles.",1
An employee was welding and had cramping in his arms and hands. He was hospitalized for heat stress and dehydration.,1
"An employee was walking near a magnetic crane in a mill grade busheling area. A pin was coming loose and the crane had to set the load down. The crane's magnet then swung across the ground, striking the employee in the leg and knocking him to the ground. His ankle was broken.",1
"Two employees were working to couple two empty railcars. The wheel of one of the cars ran over an employee's right foot, resulting in the amputation of several toes.",1
"At 4:00 p.m. on February 28, 2019, an employee was attaching a rubber belting skirt when his foot slipped and got caught in a conveyor, resulting in a leg amputation.",0
A drywall cart with metal panels fell onto an employee's leg fracturing the tibia and fibula.,1
"An employee was inspecting a brake system on a vehicle. A wheel was turned, and the employee's left index finger was caught between the tire and the brake caliper cover. The fingertip was amputated.",0
An employee's hand was crushed on a flatbed.,1
An employee was stringing new rope from a drum onto a pulling machine. The rope started to veer off to one side; the employee was pushing the pulling block back into place with his right hand when his neoprene glove was pulled into the block. The skin on his right thumb tip was torn.,1
An employee slipped while walking down stairs.,1
"On February 28, 2019, an employee slipped on black ice in a trailer yard, falling to the ground and suffering multiple fractures of the right foot.",1
"An employee was lining up a seam between two pieces of metal to be automatically welded. The welder activated and the employee was pinched between it and a mobile vise, suffering broken ribs and a broken hip.",1
"While walking to a car at the end of the shift, an employee slipped and fell on a snowbank, suffering a broken ankle. The employee was hospitalized.",1
"An employee was operating a lathe with a vacuum ejector. The part being ejected got caught in the unloader tube; as the employee was removing it, the employee's left index finger was caught between the ejector tube and the next part. The finger was amputated.",0
"An employee was spraying down overhead belts from the third step of a ladder. He fell onto a moving belt, lacerating his right elbow, forearm, wrist, and hand.",1
"An employee was replacing a conveyor roll on a three-coil miller. As the employee aligned a shaft and bearing, the roll (being supported by an overhead crane) moved upward, pinching the employee's finger and amputating the fingertip.",1
"On February 28, 2019, an employee slipped on the icy ground while exiting a truck. The employee fell, suffering a broken leg.",1
"An employee was unloading a truck. While he was lowering a loading dock, it smashed his right index finger, causing a partial amputation.",0
An employee was opening a table top for delivery inspection. He leaned the table top against a wall and it fell over breaking his right ankle. He was hospitalized for surgery.,1
An employee was running a sheet metal panel forming machine. The employee's right glove was pulled into the urethane feed-in rollers and crushed.,1
An employee was shot in the knee while delivering pizza.,1
"An employee fell backward while removing a manhole cover, landing on the pavement and suffering a broken pelvis.",1
"An employee fell from a metal deck to a concrete slab 10 feet below, suffering a head injury.",1
"An employee was taking a shopping cart out of a cart corral on the sidewalk just outside a store entrance. A car came over the parking block and onto the sidewalk, striking the corral and pinning the employee. The employee suffered a broken leg, a broken ankle, and broken ribs.",1
"An employee tripped over shrink wrap while sweeping a warehouse floor. The employee fell to the cement floor, suffering a broken right hip.",1
An employee's finger was caught in a machine gear and amputated.,1
"An employee was checking the level of iron in a furnace. The control panel joystick stuck in the forward position and the chip cart moved forward, catching the employee against the furnace and causing burns to his left hand, elbow, and stomach.",1
"An employee was supervising children in a park when she fell from a swing set. She slipped on mud, hit her head, and suffered a concussion. She was hospitalized.",1
"An employee was trying to clear a jam of plastic in a winding machine's roller. The plastic caught his hand and pulled it into the roller, causing a fingertip avulsion. The employee was hospitalized.",1
"An employee was putting a slide cover back onto a forklift after changing the battery. The pallet jack was moved back, pinning the employee between the side of the forklift and the front frame of the battery changer. He suffered a fractured pelvis and was hospitalized.",1
"An employee was working on an industrial washer. He was trying to get the drum to rotate when it moved unexpectedly, pulling his finger into the nip point of the belt and pulley. It then rocked back, discharging his finger from the nip point. The employee's pinky finger was amputated. The machine had been locked out at the time of the incident.",0
Two fully loaded pallets fell onto an employee while he was operating a pallet jack.,1
"While trying to remove a bolt from a concrete form, an employee suffered a pinched left ring finger. The fingertip was amputated, including bone.",0
"An employee was doing maintenance on a machine. The machine was turned on, causing the amputation of two of the employee's fingertips in a belt and pulley.",1
A patient bit an employee.,1
An employee was working at a shredder. The employee's hand/right arm was wrapped around a conveyor's tail pulley; the employee suffered a broken right wrist and skin damage on the underside of the upper right arm. The employee was hospitalized. The pulley was guarded at the time of the incident.,1
An employee was operating a backhoe in reverse on a gravel haul road. The backhoe went off the edge of the road two to three feet onto soft dirt. The backhoe rolled over and the employee fell off. The backhoe then struck the employee and pinned his lower legs and feet. The employee sustained a fracture right ankle and a broken left foot.,1
"An employee was unloading a delivery truck when the load shifted. He fell off the back of the truck to the ground, breaking his pelvis.",1
"An employee was trying to loosen a connection with a 60-inch pipe wrench. The wrench slipped off the pipe, spun around, and struck him. He suffered a head injury, an amputated little finger, a broken collarbone, and broken ribs.",1
"An employee was directing a pickup truck as it backed up to get a delivery. The truck struck the employee, causing bruises, contusions, and a blood clot in the leg. The employee was hospitalized.",1
Employees were retracting the pullout extension on the end of the jib attachment on a 35-ton crane. An employee was pushing on the jib extension and his left index finger was crushed by the sheave on the end of the jib causing a fingertip amputation with bone loss.,0
An employee was cleaning out the loft and tossing down materials. A bag weighing 30 pounds struck another employee that was walking under the loft. She was knocked into the stairs and wooden railings and onto the floor. The injured employee could not move her arms or legs and was hospitalized.,1
An employee's fingers were crushed by a hatch while he was working on a ship.,1
"A driver was stepping down from the back of a flatbed trailer, missed the step (DOT bumper) and fell to the ground fracturing his right upper leg.",1
"An employee was struck by a forklift and hit his head on the concrete floor, suffering a head injury and loss of consciousness.",1
An employee was moving an 8 x 10 stone slab with a powered industrial truck (PIT) when the employee's left leg became entangled in one of the PIT's tires and both ankles were injured.,1
"An employee was unloading a truck when materials dropped from it onto his left foot, breaking two toes.",1
An employee tripped on the curb and fell while crossing the street and sustained a broken elbow.,1
"An employee was repairing a leaking drain pipe under a sink at a restaurant. Water splashed on the employee's leg, causing a bacterial infection.",1
"An employee stepped into a chemical spill guard filled with water and sodium hydroxide. The chemical got into his boot, causing a burn. He was hospitalized.",1
An employee was working on a semi-trailer door when a cable snapped and struck the employee's hand. The employee sustained a fingertip amputation.,0
"An employee was repairing a panel where power cables and a card reader were stored. As he was moving a wire, it shocked him, burning three fingers on his left hand and causing muscle, nerve, and tissue damage. He was hospitalized.",1
An employee was cleaning glue off a glue machine when their arm became caught in the roller and frame of the machine. The right arm was fractured.,1
"An employee was working on a customer's semi trailer. The engine was started, causing the trailer to lower onto the employee's right hand. The employee's index and middle fingers were crushed.",1
"An employee was working on a converting line. When he pulled the emergency pull rope to stop the line, the seal bar came down on his left hand, severely injuring his index finger. The finger was amputated.",1
An employee was shoveling snow in the parking lot to assist in getting a delivery vehicle unstuck from the snow and injured their back.,1
"An employee fell in a hallway, fracturing a vertebra in her lower back.",1
An employee was operating a clipper when they were struck by wood that was traveling on a conveyor. The employee was hospitalized with a back injury.,1
An employee was using a hand truck to unload boxes from a box truck. Part of the wooden floor in the box truck gave way and the employee's left leg went through it. He sustained a laceration and a displaced muscle below the knee of his left leg. The employee was hospitalized and had surgery.,1
"On March 1, 2019, at approximately 10:30 PM, workers were attempting to rig down the gull wings of a catwalk. While removing the pins that were holding the gull wings in position, a worker's middle fingers were in holes at the bottom of the gull wings. When the pins were removed, the gull wings swung together and amputated the tips of his middle fingers below the first knuckles.",0
An employee was securing a load of metal on a trailer when a metal beam shifted and amputated his right index fingertip.,0
"An employee fell from a ladder to the ground 7 feet below, breaking his right ankle. He was hospitalized.",1
An employee was driving a forklift when it turned sharply toward a pole. The employee's foot was caught between the pole and the forklift.,1
An employee was assisting a guest when the elevator door shut and amputated his right middle fingertip.,1
"On March 1, 2019, an employee was restarting a pressure washer after refueling it when the pressure washer caught on fire. The employee suffered burns to 20-22% of his body including the left arm and shoulder, the chest and upper back.",1
"An employee was walking backwards, moving a piece of quartz with a colleague, when he tripped over a cart and fell to the floor. The piece of quartz fell on and fractured his left middle finger.",1
"On March 1, 2019, an employee slipped on ice in the parking lot while exiting his vehicle and fell resulting in hospitalization for a fractured hip.",1
"An employee was descending a building on his safety rope. The rack on the rope opened up and he fell about 9 feet to the ground below, dislocating his right elbow.",1
An employee that was operating a gas powered pressure washer sustained carbon monoxide poisoning and was hospitalized.,1
"An employee was climbing a 12'8"" permanent fixed ladder when he fell to the ground, landing on his left side. He suffered a fractured radius, fractured tail bone, fractured lower vertebrae, and internal bleeding.",1
"On March 2, 2019, at 2:30 a.m., an employee was on a ladder attaching screws to a plywood board when he lost balance and fell to the ground. He sustained a fracture to the right arm in the elbow area.",1
An employee was switching a railroad car to an outbound train. The employee was communicating with the conductor via radio. At some point the conductor lost radio contact with the employee. The railroad car made contact with the employee and knocked him down onto cross-ties and a rock. The employee sustained a broken pelvis (left side).,1
"An employee was troubleshooting the starter and control system for the drive motor of the reclaim system’s lump buster. While his left hand was in contact with the pulley drive system, the lump-buster turned on and his thumb was caught between the pulley and sheave and lacerated. The employee required surgery for tendon damage and injury to the knuckle joint.",1
An employee was installing a protector onto a section of pipe that was being held up by a forklift. The pipe slid off the forks and caught the employee's left middle finger between the end of the pipe and another section of the pipe. His left middle fingertip was amputated. The employee was wearing impact resistant gloves at the time of the incident.,0
An employee was walking on stilts installing metal frames in the ceiling. He stepped on a piece of insulation which caused him to lose balance and fall. A bracket on the wall cut tendons in his hand that required surgery.,1
An employee fell while walking into a storage container and suffered head and back injuries.,1
"While cleaning ice from her vehicle, an employee slipped and fell on the icy ground. She suffered a broken hip.",1
"An employee was installing a light fixture when it fell and struck him. He suffered injuries to the nose and right eye, as well as broken facial bones.",1
"On March 2, 2019, an employee slipped and fell on an icy ramp outside a patient's residence. The employee suffered a broken left ankle, tibia and fibula and was hospitalized.",1
"An employee tripped over an open oven door and fell to the ground, breaking her right hip and right humerus.",1
"An employee was taking photographs of fire caulking from a 28-foot extension ladder. He fell about 8 feet to the ground, suffering injuries to both arms including fractures to the right wrist, left elbow, and thumb and a chin injury that required stitches.",1
"An employee was monitoring a mud pump and slipped on a slick surface. While bracing for a fall, the employee contacted a belt and pulley on a pump. His right middle finger was lacerated just above the first knuckle and the fingertip had to be surgically amputated.",1
"While opening a cage containing propane tanks, an employee caught her index finger in the hinge. The finger was crushed, and the tip was medically amputated.",0
An employee was repositioning a cart under a mold. The employee's hand was between the mold and the cart when the mold suddenly dropped into the cart. The employee sustained crushing injuries to the right hand.,1
An employee was refueling a DC-3 airplane and fuel overflowed onto the wing. The employee slipped and fell approximately 4 feet and sustained fractures to the right hip and wrist.,1
An employee was pushing two stock carts. The carts collided when a customer walked into the employee's path resulting in amputation of the employee's fingertip. The employee was hospitalized.,1
"A border patrol agent was bitten by his K9. The agent then drew his pistol and shot the K9. In the process, the agent shot his left index finger and thumb.",1
"An employee was emptying large battery cells into the vibrating pan that feeds a battery shredder. When the cells dumped into the pan they fell against the splash door, pushing the door against his right hand and severing the tips of his middle and ring fingers.",1
A vehicle struck a guardrail that was immediately behind the employee. The employee jumped over a guardrail and then fell approximately 20 feet into a cattle crossing and sustained multiple broken bones and injuries to the teeth.,1
Two pallet jacks collided. One of the pallet jack operators was hospitalized with a fractured and lacerated lower right leg.,1
"An employee slipped and fell on ice on the way to their car, suffering back and head injuries.",1
An employee tripped and fell fracturing the right hip.,1
"While carrying merchandise, an employee tripped and fell to the floor breaking an elbow.",1
"An employee was snowboarding down a slope. The employee's backpack caught on a tree, causing the employee to run into another tree and suffer a broken femur.",1
An employee tripped and fell while walking from a ticket counter toward a break room. The employee suffered a broken right femur and was hospitalized.,1
An employee was removing plastic parts that were lodged in a stacker when the stacker smashed her left middle finger resulting in a fingertip amputation.,1
"A crane technician was in a manlift. A stacker crane struck the manlift, causing it to fall over and the technician to suffer a broken ankle. The technician was appropriately tied off at the time of the incident.",1
An employee was repairing the inside of a turbine blade when he fell onto a sharp edge protruding from the work surface. The employee sustained a laceration to his right arm requiring hospitalization.,1
"An employee was setting up a lathe. As he turned the chuck with a chuck key, his left little finger was caught between the key and the operator panel. The fingertip was amputated to the nailbed.",0
An employee was changing a knife blade on a cutter machine. The blade amputated the tip of her left thumb.,1
"At 1:30 p.m. on March 4, 2019, an employee was installing a pipe. The employee leaned on a door to adjust the pipe and fell 30 feet to the bottom of the pump pit. The employee was hospitalized for a fractured skull.",1
An employee was moving a stack of guard rail by hand and smashed his left index finger resulting in amputation of the fingertip.,0
"An employee sustained an inguinal hernia while lifting a patient. The employee was hospitalized, requiring surgery.",1
An employee was operating a milling machine to surface grind a plastic block. Their gloved left hand became entangled in the bit and pulled into the machine resulting in amputation of the left thumb at the first knuckle.,1
An employee was removing a jam from a planer and amputated his right index finger at the first knuckle.,1
"An employee was trying to replace a bent pallet racking beam. He was standing on a ladder while another employee used a forklift to push against the beam. The beam popped out, causing the employee to fall 3 feet to the concrete floor and suffer a crushed vertebra in the lower back.",1
"While putting a truck bed in the horizontal position, an employee noticed it was not latching properly. While he was investigating, the tailgate released, crushing his left middle and ring fingers against the bed and amputating them.",0
"While shoveling snow from a sidewalk, an employee felt a racing heart, chest pains, and shortness of breath. The employee was hospitalized.",1
"An employee was walking to her car when she slipped and fell on ice in the parking lot, breaking her elbow. She was hospitalized.",1
"On March 4, 2019, an employee slipped in an icy parking lot and fell to the concrete. The employee suffered a broken leg.",1
"An employee slipped on a step while exiting a building. The employee fell to the ground, landing on their knees and suffering a broken knee cap. The employee was hospitalized.",1
"An employee was walking toward a locker room when he slipped and fell on his right side, breaking his left femur in the process.",1
An employee was unblocking a lint cleaner when it crushed his left hand.,1
"An employee slipped on ice in a parking lot and fell to the ground, suffering a broken hip.",1
"An employee was getting a pallet with a pallet jack. His pallet jack moved and pinned his left leg against another pallet jack, breaking the ankle.",1
"An employee slipped on ice in a parking lot and fell, breaking his left hip.",1
"A crew was racking up outriggers on a 50-ton crane. An employee slipped and fell, and his left index finger was caught in the moving parts of an outrigger. The finger was partially amputated.",0
An employee was entering the hospital from the parking lot when she tripped over an object and fell on the concrete sidewalk. The suffered a fractured nose and left wrist.,1
"An employee was servicing a feller-buncher when he slipped on its icy track. He fell to the ground, suffering a broken elbow that required hospitalization and surgery.",1
An employee was picking up a basket of product from the floor. The segmenter blade in a wing separator machine amputated his left middle and ring fingers and part of his little finger.,1
An employee was at a single family home to repair the central heating system and fell through the ceiling to the ground below. The employee sustained injuries to the elbow and eye socket.,1
An employee was using a chop saw to cut pipe. The saw kicked back and the employee sustained a cut to his lip and broken teeth.,1
"While delivering beer kegs, an employee slipped and inside a cooler and broke ribs.",1
"An employee was operating an industrial saw. While he was placing a 2-by-4 to be cut, the saw blade amputated his left middle, ring, and little fingers. He was hospitalized.",1
"On March 4, 2019, an employee was working on a drill press when his shirt sleeve was caught in the chuck on the press and wrapped around his left thumb. His thumb was amputated.",0
"An employee slipped and fell while walking across a production floor. The employee's right hand was caught by a pallet, causing a broken wrist.",1
Two employees were moving sheet metal by hand. One employee lost their grip on the metal and sustained a laceration on his left arm/wrist that required hospitalization and surgery.,1
An employee was on a bakers scaffold finishing drywall. The platform shifted and he fell approximately 7 feet to the ground below and broke his left ankle.,1
"An employee was setting stones and installing a retaining wall. An excavator bucket came down, squeezing his hand/arm against the stone. The arm was broken, and the employee was hospitalized for surgery.",1
The injured employee was moving a case of glass into position to be loaded into a box truck. A forklift ran over the employee's right leg resulting in amputation below the knee.,1
An employee was checking equipment when he fell from a grating cover 18 feet above ground level. He was hospitalized for a fractured hip.,1
An employee was using a pallet jack and crushed their right leg between the pallet jack and a stationary barrier.,1
An employee was clearing a jam in a grinder. The machine started up and amputated four of the employee's fingers.,1
"An employee was installing an extension chute on a cement truck. The chute caught the employee's right middle finger, amputating the tip.",0
An employee fell through an opening in the platform surrounding a rooftop HVAC unit.,1
"On March 5, 2019, an employee slipped on grass and fell fracture an ankle.",1
"An employee was testing a 6-inch water line when a rubber ball struck him and cut his hand. He was hospitalized, requiring surgery.",1
Employees were power washing a debris box. An employee's left middle finger was caught between a metal panel and the wall of the box. The finger was medically amputated.,0
"Two employees were rigging and lifting a load when they were struck by a 12-foot long, 1600-kg structural support that broke free from its chain sling during the lift. One employee suffered broken ribs, a broken left foot, a concussion and required stitches on the left ear.",1
"An employee was on a ladder, looking into an attic to take pictures for a house inspection. The ladder slipped and the employee fell. The employee's left middle finger was amputated to the first joint.",0
"An employee fell from a truck's lift gate as he was unloading tires, landing on the ground and suffering broken ribs, a possible concussion, and cracked vertebrae.",1
"An employee was stacking 4-by-8 sheets on a wooden cart. A sheet of material (i.e., 30 pieces of 4-by-8-sheets) fell on the employee, pinning them and injuring their left leg.",1
An employee slipped on black ice and fell fracturing a hip.,1
"An employee was cleaning a stunner (a lobster/crab processing machine). His right hand was pinched in the idler pulley, causing the amputation of the middle finger just above the fingernail.",0
"Two employees were in a trailer. A lit cigarette ignited gas that had leaked from a propane tank in the trailer, causing an explosion. Both employees suffered second-and third- degree burns to the hands, arms, and face.",1
"An employee was cutting the edges of paper between the rolls at a winding machine using a utility knife. His right index finger was caught in the ingoing nip point between the drum and the core, causing an amputation at the knuckle.",0
"An employee pushed an unloaded pallet into a bin pallet stock/storage area (pallet flow slot return) for reprocessing, then fell to the wood floor, breaking her left hip. She was hospitalized.",1
An employee was on the back of a waste management truck when it was rear-ended by a pickup truck. The employee suffered a broken ankle and was hospitalized.,1
"An employee was trying to open an air valve for a machine being operated. His left hand was caught on a drill bit and the glove he was wearing was twisted and torn off, causing an open fracture of the left little finger and amputation of the last joint.",1
"An employee was using a dipper (a 5-foot pole with a cup) to retrieve molten metal from a gas rotary furnace. The metal splashed him, setting his cotton overalls on fire and causing burns to the left side of his torso and left arm.",1
"An employee was trying to straighten a piece of metal on a belted table. A roller caught his left index finger, causing a partial amputation.",0
"An employee slipped or tripped in a hospital parking lot on the way to the building. She fell to the ground and broke her left tibia and fibula. She was hospitalized, requiring surgery.",1
"An employee was on an 8-foot ladder doing drywall work. He fell, suffering a broken left arm and a cut on the forehead above the left eye.",1
A nail gun shot a nail into an employee's right knee.,1
"An employee was trying to move a fixture for a B-52 strut. The fixture was on a pallet. The fixture roller crushed the employee's right little finger, causing a partial amputation.",0
"An employee was standing between the carriage and the machine frame to change a water rinse bath on an auto plating line. The carriage began moving and the employee's head was crushed between the carriage and the plating line frame, causing a skull fracture and a partial ear avulsion.",1
An employee was working on the warehouse dock. As he stepped from the dock into a tractor trailer he fell and injured his right knee.,1
"On March 5, 2019, an employee slipped on a shallow patch of oil/water mixture on a garage floor. The employee fell to the floor, suffering a broken right ankle. The employee was hospitalized.",1
Wear plates for a mixer were being manufactured. The bit that was used to punch holes shattered and a fragment of it lodged in an employee's neck.,1
An employee slipped and fell on an icy walking surface.,1
An employee suffered a broken right leg when his weight shifted.,1
"While preparing a gizzard machine for cleaning, an employee suffered amputations to the right middle and ring fingers, as well as an index finger injury that required nailbed repair. The machine was not guarded at the time of the incident.",0
An employee was riding on the back of the truck and amputated his right middle finger in the cart tipper.,1
An employee choked on water and fell. The employee's head struck the floor. The employee was hospitalized.,1
"On March 5, 2019, an employee was working near the chain driven conveyor (near the front line) when the glove on their left hand was pulled in by the conveyor chain. The employee sustained the amputation of two left fingertips.",0
"An employee was on a ladder trying to remove a concrete form from a grain silo that was being built. The form shifted, causing the employee to fall to the ground about 8 feet below. His ankle was broken and he was hospitalized, requiring surgery.",1
"A city mail carrier slipped on ice and fell to the ground, breaking a leg.",1
"An employee was connecting railcars. The employee's right foot/ankle was caught between the railcar connection devices, causing crushing injuries that required hospitalization and surgical amputation.",1
"An employee was next to a mini-excavator when its control handles caught his coat. The excavator activated, causing the employee to fall, and its track then ran over and broke his right foot. He was hospitalized, requiring surgery.",1
"An employee was cutting a piece of wood with a table saw. The saw blade cut his left middle finger, resulting in a partial amputation.",0
"An employee was cutting on a dry bulk trailer with a 6-inch grinder. The grinder kicked back and cut off his left index finger at the second knuckle, as well as lacerating his palm. He was hospitalized, requiring surgery.",1
"An employee was soldering parts together. A cable was tangled around her right foot, under her desk; when she stood, she lost her balance and fell, dislocating her left knee.",1
"An employee was performing maintenance on an air-gate. The door of the gate closed on the employee's hand, amputating the tip of his right middle finger.",0
"An employee was torch-cutting steel coils when a piece of steel coil fell and struck the employee, breaking the employee's leg.",1
"On March 6, 2019, an employee was assisting in rigging up. He was working from about 10 feet high when he slipped and fell, his face striking the beam he was standing on. He suffered a facial injury and was hospitalized. Fall protection was being worn at the time of the incident.",1
"An employee was moving windows when a window slipped and pinned his left hand to the floor, causing the amputation of his left ring finger at the base.",1
"On March 6, 2019, an employee was working in a trench when a 20-inch-thick gas pipe slid off a skid and fell into the trench. It struck the employee, injuring the employee's ankle. The employee was hospitalized.",1
"An employee slipped on ice and fell to the ground, suffering a broken right ankle.",1
"An employee was loading a medical laser when it fell onto his stomach, causing an umbilical hernia.",1
"An employee was working on a delinting machine when a newly added belt caused the machine to begin wobbling. The employee turned off the machine and tried to remove the belt, which caught and broke the employee's right ring finger.",0
"As it backed up, a mini excavator ran over an employee's left leg and broke it.",1
"On March 6, 2019, an employee was working from the third or fourth step of a ladder, installing steel on a horse barn. The employee slipped and fell to the ground, suffering a broken wrist and arm, and was hospitalized.",1
"An employee was about to preheat 1-inch carbon steel with an oxygen/propylene torch. The torch caught fire, and the heat caused second-degree burns to the employee's hand through the leather glove.",1
"A safe closed on an employee's left thumb, causing an amputation between the thumbnail and the first joint.",0
"While administering dialysis to a patient, an employee tripped over a machine cord and fell to the floor, suffering a leg injury.",1
A police officer was on a roof during his rounds. He slipped and a closing door ripped the fourth finger off his left hand.,0
"An employee was cleaning up around a sawmill, throwing logs onto a long-log chain-conveyor. The nip point between a metal trough and a log caught his right index finger, causing a partial amputation at the first joint.",0
An employee was stocking shelves when an electric pallet jack injured his foot.,1
"An employee was performing setup procedures on explosives production equipment when some extra energetic residue in the area ignited. The employee's hands, back, and forearm were burned.",1
"An employee slipped on ice in a parking lot and fell to the pavement, suffering a broken hip. The employee was hospitalized.",1
"An employee was pushing a tray cart. One of the trays struck a beam and pushed back into his hand, pinching his right middle fingertip against the push handle. The fingertip was amputated.",0
An employee was cleaning his handgun when it fired into his left hand. He was hospitalized.,1
"An employee was about 6 feet up on an order picker, trying to reach a case. The employee fell from the machine to the rack below, suffering broken ribs. The employee was hospitalized.",1
An employee slipped and fell on ice while picking up a package. He suffered a hip injury and was hospitalized.,1
"An employee was spot-welding an ""eye"" onto a prefabricated wire ladder. The wire machine amputated his left thumb.",0
"An employee was in a truck bay, servicing 18-wheeler trucks. A propane heater ignited an oil rag on his clothes, causing third-degree burns on his front and back. He was hospitalized.",1
"A powered industrial truck ran over an employee's foot, injuring it.",1
"A Trinidad employee was helping pull a winch line with an attached hook through the substructure of a drilling rig. The hook snagged on part of the substructure, causing the line to tighten. The line was lying across the employee's foot, which it crushed and lacerated as it tightened.",1
"An employee was preparing some food in a nursing facility's kitchen. The employee fell on a slippery surface, landing on the floor and suffering a broken right shoulder, right arm, right foot, and left knee.",1
A powered industrial truck ran over an employee's foot as she walked past it.,1
"An employee was moving equipment when a J-hook came loose and struck his left leg, breaking his femur.",1
"An employee was performing maintenance on a backhoe, removing a hydraulic hose. The right valve released hydraulic fluid under pressure. His hand was scraped, and an amount of hydraulic fluid got under his skin.",1
An employee was loading steel beams onto a flatbed truck using a crane. The controls pinched and amputated his right ring finger.,0
"At about 10:00 a.m. on March 6, 2019, an employee was opening the doors of a trailer when a pallet of freight fell out. The freight struck the employee, causing a broken ankle and leg.",1
"A maintenance technician was trying to free a piece of metal lodged in a metal roll former. The machine engaged and crushed the employee's left index, middle, and ring fingers. The ring finger was amputated.",0
"An employee went to the bank for the employer and was driving back to the employer's facility when a vape pen battery reacted with change in his pocket, causing his pants to catch on fire. His leg and hands were burned and he was hospitalized.",1
"Employees were cutting and bending metal using a manual sheet metal brake. The brake closed on an employee's left hand, causing the amputation of the index fingertip.",0
"A mechanic was installing wheel studs when a tool popped out of place and hit him in the jaw, dislocating and breaking it.",1
Employees were trying to raise the elevation of a working platform turntable. A crane lifting the table applied too much upward pull to it before the pins that would release it were removed. An employee on the turntable was flung off when it broke free from its concrete anchors. The employee fell to the ground and suffered a broken lower right leg.,1
An employee was troubleshooting a conveyor when his right hand was caught between the conveyor frame and the crush roll. His hand was broken.,1
An employee was repairing a machine. A moving gear caught his sleeve and amputated part of his right little finger.,0
"An employee was disposing of liquid from an empty cryovac package of pork. He slipped on liquid on the floor, landed on his left side, and broke his left hip.",1
An employee suffered chest pains after shoveling snow off the shop entrance.,1
"A pallet vendor was counting pallets in an aisle when a forklift struck him, breaking his left leg.",1
"An employee and his supervisor were arguing on a loading dock when his supervisor pushed past him. He fell off the dock onto the ground below, suffering a broken hip.",1
"An employee tripped over the safety guardrail near the floor at the end of a storage rack system, breaking her right ankle. She was hospitalized for surgery.",1
An employee was taking a measurement using a micrometer while material moved toward a traction roller. His right little finger was caught on the strip line and amputated; his right ring finger was lacerated.,0
An employee was marking out roof beam locations and fell off the roof. The employee sustained rib fractures.,1
"An employee was using a driveline tool to make repairs to a truck. The tool fell onto his knee, breaking his femur. He was hospitalized.",1
"An employee was installing a new AC motor on a sheller. The come-along chain was pulled into the conveyor below and pulled the chain down onto the employee's left hand, amputating the middle and index fingers.",0
A kitchen cook was cleaning a meat slicer when the pad of her right index finger was amputated.,0
An employee was on a ladder replacing ceiling tiles. The employee fell while descending the ladder and injured their elbow. The injury required surgery.,1
"An employee was installing a cover in a sand machine. The cover shifted, causing the amputation of the employee's left middle fingertip.",0
"An employee was unloading lumber from a trailer. As he was getting down from the truck, his right knee was caught between a nearby forklift cage and the edge of the trailer. He suffered a broken right knee and was hospitalized.",1
"An employee was sandblasting sheets on the ground. The sandblaster was low on media, and the employee released the trigger to refill it. The hose applied pressure to the employee's wrist, which twisted toward the employee's upper leg and hip. The sandblaster then shot media into the employee's midsection, causing a laceration between the hip and leg.",1
"An employee had placed UHMW (ultra-high molecular weight) tube material on a mandrel, then turned on the equipment. The rotating mandrel caught his sleeve and the tube material broke his left arm.",1
"An employee was raising the dock plate at a receiving dock. The employee's finger was crushed in a pinch point, suffering a partial amputation.",0
"An employee's left index fingertip was caught between two horizontal product trucks, resulting in a partial fingertip amputation.",0
"An employee was using a demolition saw to cut pipe. The saw bucked back, lacerating his neck.",1
An employee suffered an allergic reaction to the environment and was hospitalized.,1
"An employee tripped while carrying boxes, rolling her ankle and falling. She suffered stomach pains and was hospitalized.",1
"An employee was trying to disconnect the chain from a birdbath that was still connected to the stinger of a loader. The loader began to back away from the birdbath, which was pulled onto the employee's legs. Both of his lower legs were broken.",1
"Employees were attempting to dislodge a flow line from a hand rail. The rail came loose and fell on the employee's thumb, crushing it.",1
An employee's right hand and arm were caught by a fiber fine opener machine. The arm was amputated just above the elbow.,1
"A door closed on an employee's left hand, causing the amputation of the tip of the little finger.",1
"While processing meat on a fab line, an employee suffered a stab wound to the left calf.",1
"At about 6:00 p.m. on March 7, 2019, an employee was performing preventive maintenance on fans/belts on the HVAC system. He was working on a vertical stack of components that included four belts, working from top to bottom. The bottom belt pulled in his left hand, causing the partial amputation of three fingers. He was hospitalized.",0
"An employee was standing on a chair, filling the ice bend of a soda fountain. The chair slid out from under her and she fell, breaking her ankle.",1
"An employee was mowing the ground using a riding mower. When he placed his hand on a branch to avoid hitting his head, the mower slipped toward the tree. As a result, the employee suffered a right middle finger amputation.",1
"An employee fell from the step of a truck to the ground, breaking his right leg.",1
"An employee was moving a cart down an aisle in the stockroom to pull product. A block riser fell from the top shelf of the cart, striking the employee on the head and causing a contusion.",1
"A closing toolbox lid caught an employee's left index finger, causing the amputation of the tip.",0
"At about 10:45 a.m. on March 7, 2019, an employee was at the back of a printing press, where dried paper had wrapped around a carrying roll. He was 3 feet up a 6-foot ladder, removing the stuck paper, when he fell to the cement floor, encountering wall-mounted valves, a metal catch tray on the floor, and a metal grating. He suffered back pain and two lacerations, one to the back of the head and one on the left elbow. Each laceration required stitches.",1
"An employee was trimming from the basket of an aerial lift. The basket tipped and the employee fell to the ground, suffering a broken femur.",1
"While walking to a conveyor, an employee tripped over a yellow metal guard on the floor. The employee suffered an injury to the right knee.",1
"An employee was on the roof of a nursing facility, replacing an air filter. The roof was completely covered with snow. The employee fell through a skylight and landed on the ground level about 12 feet below, breaking his left ankle.",1
"An employee was rigging up the head section of a bucket elevator for installation. The forklift holding one side of the load shifted, causing the head section to twist. The employee fell 15 feet to the ground, hitting concrete.",1
"Three employees were unloading bundled windows from a box truck. The windows tilted over and fell, striking one of the employees on the right leg below the knee and breaking it.",1
"An employee was walking on a wood 2-by-4 when the wood broke and he fell to the ground about 10 feet below, suffering a right ankle fracture.",1
An employee suffered frostbite on his left little toe after spending most of the day outside pumping gas. The toe had to be amputated.,0
An employee was making a cardboard bale when he started to experience chest pains.,1
"Am employee slipped on a piece of cardboard and fell to the floor, breaking his right hip. He was hospitalized.",1
An employee was walking into a garage area. The handle of a closing door caught his jacket cuff and his right index finger was caught in the door. The tip was amputated (without loss of bone).,0
"An employee was hoisting hides with a hoist attached to a support beam. The beam failed and fell, striking the employee in the head and breaking the employee's jaw. The employee was hospitalized.",1
"An employee was pushing a shopping cart when she tripped on an anti-theft alarm post at an entrance doorway. She fell, breaking her left hip. She was hospitalized.",1
"An employee was operating a forklift when its hydraulic hose became bound. While the employee was trying to remove the hose, the forklift's mast chain moved, causing an amputation to the employee's left thumb to the first joint.",0
"At about 1:15 p.m. on March 8, 2019, an employee was loading grain decks onto a trailer. He fell off the end of one grain deck onto another deck, striking his head, arm, and lower leg. He was hospitalized.",1
"An employee was on stilts when he tripped and fell to the ground, breaking his hip.",1
"An employee was being lowered on a forklift man basket when the hydraulic mechanism of the forklift pinched the employee's right pinky finger, amputating it at the top knuckle.",0
"While walking out from behind a counter, an employee tripped and fell to the floor, suffering a broken right hip.",1
"An employee fell off the edge of a platform to the ground about 32 feet below. He suffered a broken arm, leg and pelvis. A harness was not being worn at the time of the incident.",1
An employee was sweeping a floor to remove lime. The employee was hospitalized with lime dust irritation in the eyes.,1
"An employee was setting up the butt welder to weld a cable. The employee's right hand was in the point of operation when the butt welder clamp activated, amputating two fingertips.",0
An employee was inside the rear of an 18-wheel truck unloading freight when he fell from the truck onto the ground below. He was hospitalized with a left elbow fracture.,1
"An employee was walking out of the cooler in a meat department. He lost his balance and fell to the concrete floor, breaking his right femur. He was hospitalized.",1
"While exiting an excavator, an employee slipped on ice and fell to the ground, suffering a broken tibia that required surgery.",1
"An employee fell through a sheet-metal-covered opening to the concrete floor below. He landed on his feet, then fell down. He suffered soreness, pain, and difficulty putting weight on his feet and was hospitalized.",1
"Plant maintenance workers were disassembling some machinery in a plant. A conveyor tipped, lacerating an employee's forearm.",1
"Two employees were in the bucket of a bucket truck energizing a 13,800-to-2,400-volt stepdown transformer by closing three 100k fused cutouts at the riser pole. A voltage meter used to take readings on the ground was overloaded and failed, causing an arc flash. One of the employees in the bucket suffered first- and second-degree burns to both wrists, the face, the neck, and the ears and was hospitalized.",1
"An employee was helping a forklift unload a metal bin filled with mill scale. When the load was lowered, it slid off the forks and landed on the employee's left index finger, causing the amputation of the tip.",0
An employee was installing a counterweight on a laser machine when it dropped onto the employee's toe. The employee suffered bruising and cuts.,1
"An employee was respooling wire coming from a press. His left hand was caught between the wire and the wire guide pulley, and the ring fingertip was amputated.",0
An employee was operating a bottle descrambler. A bottle flew at him and as he tried to deflect the bottle away his right hand was caught in the machine resulting in amputation of the ring fingertip without bone loss.,1
An employee was re-threading a roll of paper at a paper treating line. His right forearm was caught and broken between two rollers moving in opposite directions.,1
"An employee was cleaning concrete off an aluminum formwork panel and placed it on the ground. Another panel carried by a forklift had gotten stuck on some steel rebar. It fell and hit another panel, causing it to fall and strike the employee.",1
"An employee was holding a crane lifting chain while the load was starting to be lifted. When the chain tightened, the employee's thumb was caught in the chain, resulting in a partial amputation and hospitalization.",1
An employee was operating a forklift when it pinned his left foot against the steel post of some industrial shelving. His ankle was broken.,1
"At about 2:14 p.m. on March 9, 2019, two employees were taking recycling outside on a receiving dock. One of the employees fell off the dock onto her back, hitting her head on the concrete below. She was hospitalized.",1
"An employee was bringing a group of cows to the milking parlor and walking them down a ramp walkway when a bull came up and pushed him against a concrete wall, then lifted him up and over the wall onto the concrete floor. He was hospitalized with a fractured pelvis and fractured lower vertebrae.",1
"An employee was trying to apprehend a fleeing subject, who fell on the employee's right leg. The employee's leg was broken.",1
"While climbing a ladder to clear a baggage jam, an employee fell to the concrete floor, suffering a head injury and losing consciousness. He was hospitalized.",1
"On March 9, 2019, an employee was repairing a splice when the transfer rollers came down and caught his head between a drum and a transfer roll. The employee suffered fractures to the right eye socket, nose, and jaw. He was hospitalized.",1
"While closing up a cargo bin, an employee fell about 6 feet from a belt loader to the ground, suffering a head injury.",1
An employee was unjamming a push rod on a loader. The employee's left middle finger was caught in a pinch point between the loader and the loading ram. The employee suffered an amputation to the finger.,0
"An employee was leaving her car when she slipped on ice, fell on her back (suffering a herniated disk), and lost consciousness.",1
"An employee was pulling a nylon sling up from between loose pieces of material in a bundle cart. The bundle cart tipped over, and seven loose pieces of tubing fell from it to the ground about 30 inches below, then rolled into the employee's left ankle/foot. The employee was pinched between the tubing and a stack of material.",1
"An employee was getting a cooler from the passenger side of his truck. He fell to the ground below, breaking his left hip. He was hospitalized.",1
"An employee was hooking up a chain under a metal floor base. The floor slipped and smashed three fingers on the employee's right hand, breaking them.",1
"An employee was pulling a baggage cart toward a belt loader. The tongue of the baggage cart struck his right middle finger against the belt loader, amputating it at the first knuckle.",0
"A truck driver was parked and waiting outside on the back platform of his truck. The truck was rear-ended by another truck, and the employee fell down on his empty trailer bed, suffering a head injury.",1
"An employee fell about 13 feet from a mezzanine to the concrete ground floor, suffering a broken ankle.",1
"An employee fell from the fourth rung of a ladder to the ground below, breaking his left forearm.",1
"An employee was using a 6-foot breaker bar to demolish an old concrete sidewalk when the concrete slipped off the excavator forks, causing the breaker bar to pop up. Concrete hit the employee in the chin and Adam's apple area, lacerating his neck and knocking him unconscious.",1
"An employee was feeding 8-foot lumber into a pop-up chop saw. As he pushed the lumber up to make the second cut, the saw engaged and amputated the tips of his left index and middle fingers.",0
A store patron struck an employee in the jaw.,1
"At about 11:20 a.m. on March 9, 2019, an employee and his employer were working on the roof of a new construction structure. They were installing paper in the roof when both slipped and fell to the concrete floor. The employee suffered massive bleeding from the head and severe bruises on his left shoulder.",1
"An employee was cutting meat with a bandsaw when it cut the tips of the employee's fingers, causing a thumb laceration and a partial amputation to the index finger.",0
"BMWC employees were unloading 18-inch pipe from a trailer and placing it on the ground. The pipe began to roll, trapped an employee's foot, and rolled up onto his leg, breaking his tibia. He was hospitalized.",1
An employee was walking on tarmac between airport gates when he slipped on ice. He suffered a torn left quadriceps and a broken patella.,1
"A forklift operator stepped off his forklift and it ran over his foot, breaking his ankle.",1
An employee suffered a broken rib and lacerated liver in an altercation with a group home client.,1
An employee was helping put a scrubber machine away when he felt a strain and pain in his elbow.,1
"While walking on base, an employee slipped on ice and fell backwards. The employee's head struck the ground. The employee suffered a concussion and a laceration to the back of the head.",1
"On March 10, 2019, an employee was getting off an order picker when a high-reach lift came around the corner, striking the employee and breaking bones in his ankle.",1
An employee was changing a blade on a kitchen appliance when the blade lacerated the employee's hand.,1
"An employee was moving a cart when a pole hit her hand, breaking and lacerating it.",1
"An employee was assisting with oil well rig-down when the rigging equipment failed. The employee was struck by a sheave, suffering broken vertebrae and ribs.",1
An employee experienced abdominal pain due to a hernia while hose washing the promenade.,1
An employee was cleaning out a trash can with bleach. The bleach reacted with some residual descaling solution in the can; the employee was hospitalized to treat chemical inhalation.,1
"An employee was operating a chuck saw when it lacerated two of the employee's fingers, requiring hospitalization.",1
"An employee was on a ladder repairing a light fixture. The employee fell from the ladder, suffering broken shoulder blades, broken ribs, and a bulging lower-back vertebra.",1
"An employee was servicing a pneumatic pump. After he attached an air hose, the air control valve caught his right middle finger, causing a partial tip amputation with no bone loss.",0
"An employee tripped over carpet, suffering a broken right hip.",1
"An employee was climbing a 35-foot ladder. He slipped and fell from about 12 feet up, landing on the ground and suffering a broken hip and a facial laceration.",1
"An employee was working with a manual core blowing machine with a sliding door. The platen came down on her finger, causing a partial amputation to the right thumb.",0
An employee was pulling a tarp over a semi truck load when he fell from the trailer's platform to the ground 4 to 6 feet below. He suffered fractures to the head of his left humerus and his left elbow.,1
"An employee slipped on ice in a parking lot and fell to the ground, suffering a broken leg.",1
"An employee was unjamming an obstructed tube in a donut injector. The machine cycled, pinching her index finger and amputating the tip.",0
"An employee was loading propane into a tanker truck at the end of the day. When the fill valve was opened, propane from the hose hit the employee on the left side of his chest, causing a cold burn.",1
"After retrieving a part from a shelf, an employee fell from a ladder to the floor. The employee suffered a broken elbow and broken ribs.",1
"While walking out of a job trailer, an employee slipped on ice and fell on his back, suffering broken lower-back vertebrae.",1
"An employee tripped over a concrete parking stop and fell, breaking her left arm.",1
"An employee performing patient care tripped and fell over a blanket to the floor, resulting in a broken left hip that required hospitalization.",1
"An employee was dismantling a stage at the convention center when the stage fell onto the employee's foot, causing multiple fractures.",1
"An employee was walking toward a 3-foot-high pile of new power poles. The pile shifted and a pole rolled up onto the employee's left foot, breaking bones. He was hospitalized.",1
"An employee slipped and fell on an icy walkway while entering a job site. He fell to the ground, suffering a leg fracture that required surgery.",1
"An employee was operating a pallet truck. As he was turning into an aisle from the south dry dock, he struck a guard rail with his right hand, causing the pallet jack to come to a full and complete stop that thrust him forward off the machine. As he fell from the machine, he held onto the throttle. His left foot and leg were then pinned against a rack. He was hospitalized with a crushed right hand, left leg laceration, and fractured fibula.",1
"An employee was walking from her car when she fell onto a concrete curb, suffering a broken hip.",1
An employee fell on ice while walking into a facility where he was scheduled to conduct maintenance on machinery. He broke his leg in two places.,1
"On the morning of 3/11/2019, a temporary employee working for Deventry, was working on an exterior facade that was located on the rear of the school on top of a lower roof using a 16' extension ladder. The employee fell approximately 10 feet from the ladder and struck his head on the lower roof.",1
"On March 11, 2019, an employee was checking a jet nut on a roll forming machine. The nut and its shaft rotated, and his right ring finger was pinched between his Allen wrench and a guide rail within the machine. The fingertip was amputated. The machine was not locked out at the time.",0
"An employee had arrived at a patient's home and was preparing to deliver oxygen and durable medical equipment to the patient when the employee slipped on ice or snow and impacted the ground, fracturing the right tibia and fibula.",1
"An employee fell from an 8-foot step ladder, suffering a broken right lower leg.",1
"An employee was helping a customer unload granite/quartz slabs from the bed of his truck. A slab tilted and fell toward him. He jumped from the trailer to the ground, breaking his leg.",1
"A crane operator was cleaning the outside of a deck crane. He tripped and fell from the back of the crane to the ground floor about 6 feet below. He suffered six broken ribs on his left side, a punctured left lung, and a broken pelvis.",1
"An aerial forklift struck an employee as it backed up, breaking his right leg. He was hospitalized, requiring surgery.",1
"A crane operator was doing rigging work on the deck of a crane. He fell off the deck to the ground 5 to 6 feet below and broke his right femur. He was hospitalized, requiring surgery.",1
"As part of a performance dexterity test, an employee exited a bus via the back emergency door: she opened the door, sat down, scooted out the door, and landed on her feet. She then fell forward, landing on her front on the parking lot pavement. Able to sit up, but not get up, she was hospitalized.",1
"An employee was checking a pressure washer motor belt's tightness when the motor energized, catching the employee's right index finger in the belt and pulley. The employee's right index finger was amputated.",0
"While refilling a condiment station in a dining room, an employee slipped and fell, breaking his hip.",1
"A truck driver slipped as he got out of his truck, falling to the ground and suffering a hip injury.",1
"An employee was operating a mulch grinder in a landfill. The grinder jammed and the employee was caught between the mill and the chain, suffering a broken pelvis.",1
Four employees were working inside the shop on a propane tank. They were removing a valve from the propane tank when the gas filled the workspace and ignited. One employee was burned and required hospitalization.,1
"An employee was standing up when he tripped over the leg of his chair. He fell to the floor, breaking his left hip.",1
"An employee was walking back to their desk, tripped over an ergonomic mat on the floor and fell striking their right hip on the back of a desk. The employee was hospitalized with a broken hip.",1
"An employee fell while walking down an operating room hallway, striking her head on the wall and suffering a head injury.",1
"In the feed mill warehouse, an employee was leaning up against a 36"" industrial wall fan. The fan blade sliced through the steel enclosure and lacerated the employee's right palm. The employee was hospitalized.",1
"While taking trash to a dumpster, an employee slipped on black ice and fell. The employee suffered a broken left leg and underwent ankle surgery.",1
"An employee was lifting a piece of steel weighing approximately 100 lbs. onto the work bench utilizing a magnetic lifting device attached to a jib crane. When the employee began to move the piece of steel, it fell from the magnet and struck the employee's left foot. The employee was hospitalized for foot fractures.",1
"An employee was using a table saw to make an angle cut on a trim board. The board jumped as he pushed it, causing his left hand to come into contact with the sawblade. His middle, ring, and little fingers were lacerated; he was hospitalized, and the ring finger was medically amputated just below the first knuckle.",0
"An employee was using a knuckle boom to clear hurricane debris. A log slid off the grapple bucket and hit him in the face, knocking him out of his seat. He fell about 15 feet to the ground. He suffered a traumatic brain injury, a broken wrist, and other injuries.",1
"An employee was doing a demonstration on how to perform a compact jump. When she jumped into the water, she struck the bottom of the pool and fractured her tibia and fibula.",1
"An employee was walking through the office area when she stumbled and fell to the floor, resulting in a broken hip.",1
"An employee had completed routine reduction cell skimming prior to installation of a new carbon anode. He had exited the catwalk and immediate work area to store tools and cool off when he discovered his shirts were on fire. He suffered third and second degree burns across the lower back, upper left back, and right arm, as well as additional burns to the left-hand fingers. He was hospitalized.",1
"An employee was driving a stand-up forklift when it struck a sit-down forklift. The sit-down forklift's forks struck his right foot, causing lacerations and possible broken bones requiring surgery.",1
"An employee was measuring a section of boat. He was stepping onto the lower swim platform when he lost balance and tried to grab the boat's boarding ladder to brace himself. He fell approximately 7 feet to the cement ground below, landing on his feet and breaking both heels.",1
An employee opened an interlocked guard door and caught their hand in a pinch point causing a fingertip amputation.,1
"An employee was walking into the lobby of the building, tripped and fell.",1
An employee was helping an equipment operator remove the cover and dye roll on a rotary machine. The employee's hand slipped on a fixed roller and came into contact with a knife edge. Two fingertips on the employee's left hand were amputated.,0
A maintenance employee was fixing a chain on a conveyor line when the equipment restarted and amputated his left index fingertip.,0
An employee was installing new wire during construction of a residential townhome and contacted a live pedestal buss bar resulting in electrocution. The employee was wearing flame resistant clothing and electrical protector gloves at the time.,1
"An employee was doing preventative maintenance on a forklift and was checking the fuel regulator on the unit. After cleaning the filter, the employee popped the bolts off the cover of the regulator and the propane blew up in his face. He suffered chemical burns to the left side of his face and both eyes.",1
An employee was preparing to load asphalt into a truck. The employee was about to line up the hose into the opening of the truck when the asphalt in the tanker flashed causing second degree burns to the employee's face and arms.,1
"On March 12, 2019, a Trillium Farms maintenance employee was cutting a T-shaped piece of plastic with a table saw. The blade amputated the employee's right index finger. The saw was unguarded at the time.",0
An employee was pushing a 3-foot ductile steel pipe into an excavator bucket and felt a pop in his lower back. The employee was hospitalized.,1
An employee was removing a fill plug from the differential on a heavy loader. Hot oil causing second degree burns to the employee's left hand and right arm.,1
An employee was operating a forklift and pinned his left foot between the forklift and a metal rack causing a fracture to his left ankle that required surgery.,1
"While walking across a warehouse, an employee was struck by a forklift and fell over. The forklift then ran over the employee's right foot, breaking it.",1
"An employee had been cutting a plastic sheet using a panel saw. As he was picking up the pieces he had cut off, the saw grabbed his left glove and pulled his thumb into the blade, resulting in an amputation between the nail and the joint.",1
"An employee fell off an 18-foot-tall tanker to the concrete floor, suffering a broken skull and five broken ribs.",1
"An employee was suspending a pour pot above an open kettle of hot tar when the wire broke and the pour pot fell into the kettle, splashing hot tar on the employee. The employee was hospitalized with burns to the face and neck.",1
An employee was cutting baseboard with a chop saw and amputated a finger.,1
"An employee was using a powered industrial truck picker to retrieve a shower door. The employee fell from the picker to the ground about 8 feet below. The employee was hospitalized, having suffered brain bruising and a nosebleed.",1
"An employee was moving a 55-gallon drum of malt liquid weighing 655 pounds. The employee's right middle finger was caught between the drum and a frame, causing a partial fingertip amputation.",0
"Employees were conducting rigging operations and lifting a 350-pound lug when it swung unexpectedly and struck the injured employee in the lower left leg, fracturing it.",1
"An employee was working at a well site where tubing was being pulled. As a block was being lowered to place a tube, the brake handle broke, allowing the block to fall down to the decking where the employee was working. The employee was struck by the block or other materials falling from about 6 to 10 feet above. He suffered a head laceration.",1
An employee was adjusting a jammed machine when his finger was amputated.,1
An employee was cutting a recessed cabinet panel on a table saw. The panel jammed and then quickly slipped forward into the blade. The employee's hand was in-line with the saw blade as the panel slipped forward and the employee sustained a left fingertip amputation. The machine was guarded at the time.,0
"An employee was closing a large sliding door when it closed on his right hand, causing a right ring fingertip amputation.",0
"On March 12, 2019, an employee suffered a finger amputation on a powered hand tool/appliance.",1
An employee was cutting wood down to size when the sawblade cut his left hand.,1
An employee lacerated and sustained multiple fractures to his left foot while clearing a jam on a block machine.,1
An employee placed the wire mesh into the wire trim machine. His left middle and ring fingers were amputated when the machine was activated.,0
"An employee was working with a team to lift and move a metal skylight curb. The curb slipped and while the employee tried to stabilize it, the metal corner of the curb lacerated his forearm/wrist area.",1
"An opened valve sprayed hot, hexamethylene diamine (HMD) onto an employee, causing second-degree burns. The employee was hospitalized.",1
"An electric hand grinder was being used to cut an empty metal 55-gallon drum that had held motor oil. The drum exploded. The employee suffered a broken facial bone, moderate burns on the side of the face, and burns to the esophagus and lungs.",1
"An employee was walking up the sidewalk to a patient's home on an uneven, cracked concrete surface. She stepped in a crack and fell, suffering an open fracture of the lower left leg. She was hospitalized, requiring surgery.",1
"An employee was cleaning a lot with an excavator. As he was pulling down branches, a tree limb came through the windshield and smashed his right leg, perforating the skin.",1
An employee was backing up a forklift when his right hand was caught between its cage and a pallet of plywood. His middle and little fingers were amputated above the knuckles.,0
"An employee was driving a tractor along a farm road to collect bags of garbage. She stepped off the tractor and grabbed a trash bag from the ground. While getting back onto the tractor, she slipped and fell. The tractor tire ran over her leg, breaking it.",1
An employee was loading pipe onto a truck using an overhead crane with chains as the lifting attachment. The chain slipped while the employee's hand was on the chain amputating the left ring finger at the first knuckle.,0
A technician was removing wiring when his right arm came into contact with an energized bus carrying 277 volts AC to ground. He was shocked.,1
"An employee was trying to latch a waste container door. The door opening caught his left little fingertip, crushing/cutting it.",1
A temporary employee was working at the plating line to prepare parts for the plating process. He was dipping hooks into a bath solution to remove oil from their surfaces for further production handling. His left hand was pulled into a hot (180 degrees) 4% caustic solution bath and suffered second degree burns. The employee was wearing gloves at the time.,1
An employee was moving the floor scrubber to an area of the warehouse to drain the water reservoir. He opened the door and proceeded to move the floor scrubber towards the door. The scrubber fell out of the door and the employee jumped off of the scrubber and landed on his right elbow and side causing a right elbow fracture and bruising on the right side of his body.,1
"While trying to free a semi's landing gear (which had been frozen to the ground), an employee suffered an abdominal strain. The employee was hospitalized.",1
"An employee was checking a process line when a liquid pulp container blew up, causing second degree burns to the employee's arms, legs, and back.",1
An employee was attaching a trailer to an electronic cart and he severely lacerated his left index finger.,1
"On March 13, 2019, at approximately 6:45 p.m., a temporary employee was setting up a new job on the sheet metal cutting machine when his fingers contacted the blade, resulting in a partial traumatic transphalangeal amputation of the left ring finger. The machine was guarded at the time.",0
"An employee was a passenger in a dock cart when it struck the rear of a forklift. The employee's left leg was pinned between the cart and the forklift, sustaining a fracture and vascular damage.",1
"An employee tripped and fell while arriving at a patient's home, breaking her kneecap.",1
An employee was walking along the slope of a trench and jumped towards a ladder causing fractures on right leg.,1
An employee fell 4-5 feet off the back of a truck and struck the back of his head. The employee was hospitalized for a concussion.,1
"An employee was loosening a fixture (a piece of metal weighing about 30 pounds) that held steel rolls on a lathe. The fixture fell on his right index finger, causing an amputation of the tip.",0
"An employee was disarming safety and arming devices when detonators exploded, causing burns and lacerations to both the employee's hands.",1
"An employee slipped while climbing into a truck cab, falling to the ground and breaking his right arm in three places.",1
"A truck driver slipped and fell while getting onto a truck, breaking his arm in three places.",1
"While moving a traffic barrel/drum, an employee fell into an open manhole. His left tibia was broken in the 2-foot fall.",1
"A piece of a tree that had grown into a service drop was removed. It came loose and fell, striking an employee on the ground. The employee suffered broken ribs.",1
An employee was grinding a piece of metal when the metal became stuck and created a pinch point that caused the amputation of the right index finger to the first knuckle.,0
"An employee was performing maintenance on a conveyor when the employee's finger entered a nip point on the conveyor, resulting in a fingertip amputation. The equipment was not de-energized at the time.",0
"An employee was loading a truck when a piece of bar stock slipped pinching his right thumb between two pieces of bar stock (1.5"" diameter; 21 feet long). The employee sustained a partial amputation.",0
"An employee fell down stairs and was injured, suffering bleeding in the brain.",1
"A temporary employee was watching another, full-time employee adjust a whipped topping machine. Rotating parts in the machine amputated the tip of the temporary employee's thumb.",0
"A temporary employee was operating a forklift with a dumping attachment. The mast extended in the air during a sharp turn, causing the forklift to tip onto its side. The employee suffered a broken foot.",1
An employee was troubleshooting a soap stamping machine. The stamper cycled crushing his right hand and wrist.,1
"A piece of equipment fell on an employee's little finger, breaking it. He was hospitalized.",1
"At about 12:30 on March 13, 2019, an employee was climbing a 6-foot ladder, reached the third or fourth rung, and opened a light fixture lens cover to replace the light bulb. The light fixture (and an 18-by-7-foot section of the T-bar ceiling) fell and knocked the employee off the ladder. He suffered a concussion.",1
"While cleaning floors, an employee was caught in a candy manufacturing machine. He suffered broken ribs and crushing injuries to his chest and arms.",1
"An employee was struck by an automobile while retrieving shopping carts in the store's parking lot, suffering multiple injuries.",1
"An employee was leaning on a guardrail when it broke and he fell approximately 10 feet, breaking his arm and ankle.",1
"An employee was walking down a slope when he hit ice, fell to the concrete, and broke his right arm in seven places. He was hospitalized.",1
"An employee was operating a forklift to stack pallets. While the employee was backing up, the forklift began to fall from the loading dock. He attempted to dismount the forklift, but it pinned his leg and knee. He was later hospitalized for a blood clot in his leg.",1
"An employee was waiting for water to come through the trench drain and then across to him in the wastewater treatment area. Since the water was not coming through the wastewater treatment area, the employee determined the transfer line must be clogged, so he added steam to try to clear the line. The hose popped out of the discharge line in the pit and sprayed the employee with hot steam. He suffered burns to the wrists and abdomen.",1
"An employee slipped on a metal bar inside a truck trailer, suffering a knee injury.",1
"An employee was on top of a trailer, leveling out product. He stepped over a gap about 18 inches wide and fell about 11 feet to the ground, suffering broken ribs and a broken left hip; his spleen was removed.",1
An employee was using a fusion machine and attempting to clamp a pipe when the machine's vise arm closed and the employee's finger was caught in a shear point of the clamp arm. The employee received a partial finger amputation.,0
An employee was checking moisture on the sheet conveyor belt. The employee's left hand was pulled between the two conveyor belts and pinched between a roller. The employee was hospitalized and required surgery for a muscle injury. The machine was unguarded at the time of the incident.,1
"An employee's foot/toes were caught between a moving lift truck and angle iron. The employee's left big toe was crushed, resulting in its amputation.",1
"An employee was trying to push a stuck stack of cardboard from one conveyor belt line to the next. The first line reversed and the employee's left foot was caught between the two lines, sustaining a fracture and laceration.",1
"An employee was struck by a car while doing road construction, suffering an amputation.",1
"An employee was climbing down a ladder when he slipped and fell to the ground, breaking his elbow and pelvis.",1
"An employee was removing jammed blanks from a picker head assembly. The machine was jogged, causing the amputation of the employee's right index fingertip.",0
An employee's left ring finger was amputated in a nip point between rollers.,0
"An employee was serving as a lookout for a forklift operator who was picking up steel beams to move them on the job site. The forklift arm caught something on the ground and caused the load to bounce. When the load bounced, the beams toppled over. The employee was then pinned between a steel beam and a vehicle, suffering a cut to the upper left leg and bruising on the upper right leg.",1
"On March 14, 2019, an employee stepped on a 36"" high pallet to observe a part stored on an upper rack. The employee slipped and fell from the pallet and the stored part fell and struck/grazed the employee's head, causing a skull fracture.",1
"While lifting a box that weighed 34.4 pounds, an employee twisted and experienced a pain in the back. The employee was hospitalized with a strained/sprained back.",1
"An employee was moving a small generator with a cart. The wheel of the cart got caught in a floor seam and the generator tipped over and fell on his right knee and ankle, causing a broken ankle and a chipped knee.",1
The injured employee was positioning wooden chock blocks/boards for leveling a piece of equipment. Another employee tossed a board towards the board the injured employee was holding. It struck the board the injured employee was holding and smashed the tip of the employee's right ring finger. The employee suffered an open fracture and avulsion and underwent a medical amputation of about 1/2 inch off the tip of the finger.,0
"An employee was repairing a motorized boom conveyor used to load trailers. The employee used an open end wrench as a pry tool in an attempt to correct the tracking of the conveyor belt near the end pulley. When the unit was actuated to start to the re-track process, the wrench moved and pinched the employee's right pinky finger against a hard metal surface, amputating the finger from the first joint.",1
"An employee was overseeing a carrot bagging machine. A bag got stuck in the machine; while the employee was trying to remove it, the machine's knives cut off the tip of his right index finger.",0
"An employee was performing maintenance on a workover rig when the employee's left middle finger was pinched in the pin, resulting in a fingertip amputation.",0
"An employee was working on an assembly line for refrigerator cases when he noticed wiring had fallen from the top of the refrigerator case to the bottom, near the rollers. When he was retrieving it, the case was pushed down the line; the tip of the employee's right ring finger was amputated.",1
"An employee on a step ladder was retrieving inventory from a shelf when he stepped back and fell off the ladder, suffering leg trauma.",1
"On March 14, 2019, an employee fell on a seating area while assisting in a concrete pour. The employee suffered a head injury and was hospitalized.",1
"While cleaning a restroom, an employee slipped and fell to the damp floor, suffering a broken elbow.",1
An employee was operating a pallet machine when his glove was caught in the chain and his hand was pulled into the chain and sprocket. The tips of his left little and ring fingers were amputated.,0
"An employee was repairing a garage door when it slipped. The employee's left middle finger was caught between the closing panels, and the tip was amputated.",0
"An employee was pulling a cart with a cast manifold and mopping the floor. The cart rolled forward, dropping one leg into a drain, and the cart tipped. The manifold then fell and landed on the employee, breaking her left index finger, left ankle, and four left toes.",1
An employee was grading and pulling strips. The employee's right ring finger was caught in a conveyor roller on the grading line. The finger was amputated.,0
"While installing underground plumbing, an employee was holding a PVC pipe straight as a skid steer backfilled the pipe. The skid steer bucket struck his fingers, resulting in a left index finger amputation.",1
"An employee was painting from a small scaffold, about 5 feet high. The employee fell off the scaffold, suffering broken ribs and a broken clavicle.",1
"An employee was working on the end of a spiral cooling conveyor belt. During cooling activities, the employee bent over and placed their hand at the end of the cooling conveyor belt. The metal conveyor belt met with a pointed cylindrical free spinning wheel approximately a half inch from the metal conveyor. The employee's middle finger was caught between the conveyor and the free spinning wheel resulting in an amputation injury.",1
A maintenance technician's finger was caught between two gears while he was greasing a machine. He suffered severe damage to his left index and middle fingers.,1
An employee was using a cut-off saw to cut an 8-inch pipe for a water main when the saw kicked back and struck the employee's face. The employee was hospitalized with multiple lacerations.,1
"At about 11:20 a.m. on March 14, 2019, a truck driver was working on top of a tractor trailer to check the fuel level. A gust of wind blew the employee off the top of the trailer. The employee suffered broken bones and was hospitalized.",1
An employee was walking down the stairs and fell. She broke her knee.,1
"On March 14, 2019, at approximately 11:40 AM, an employee was cutting a piece of quarter stock for a trim on a residential housing unit.  As the employee cut the piece, which was approximately 3 inches in length, the employee's left hand became unstable from the wood, and the left index finger contacted the blade. The employee suffered a left index finger amputation.",1
"An employee was walking down a corridor when he slipped on the wet floor, and fractured his left kneecap.",1
"At 1:28 p.m. on March 14, 2019, an employee was in the parking lot helping a customer check their battery. The employee lost his balance, partially due to high winds, and fell onto a concrete parking block. He was hospitalized, having suffered a broken right hip.",1
"An employee's hand was caught in a metal press brake, resulting in amputations to his left middle and ring fingers.",0
"An employee was stacking product in the back of a trailer at a customer's site when he lost balance and fell forward to the trailer floor, landing on his hands. He was hospitalized with broken bones in the hands and wrists, requiring surgery.",1
"An employee slipped on icy slush and fell to the ground while stepping off a curb, fracturing his ankle.",1
"An employee was cutting the banding from bundles of wood when the bundle became unstable, hitting the ground and the shin area of the employee's left leg. The employee suffered a broken leg.",1
An employee was delivering scrap metal at a site and entered the truck trailer to sweep leftover metal for the crane magnet when the employee was hit by the magnet. The employee sustained a pelvic fracture and was hospitalized.,1
An employee suffered a hernia while lifting material.,1
"An employee was operating a press brake while forming parts when the employee's fingers entered the line of fire, resulting in three fractured fingers. The employee was hospitalized.",1
"An employee was picking citrus. At the same time, a loader was backing up. The employee attempted to remove a ladder from the path of the loader when the loader ran over his lower right leg, breaking it.",1
"An employee was part of a crew conducting maintenance on a rail siding. The jack holding the rail fell, and the tip of the employee's left middle finger was caught between a tie plate and the underside of the rail. The fingertip was amputated.",0
"An employee was unloading glass shower door panels (3 feet x 7 feet), when the pile (approximately 20) fell on him, breaking both of his ankles.",1
An employee suffered an amputation of the right arm just under the shoulder when his arm was caught in a machine roller.,1
"At approximately 9:00 AM on March 15, 2019, an employee was seated on the back of a 3-wheeler cart. The driver was reversing the cart when the driver lost control and propelled the employee into a wall and onto the floor. She suffered a severe sprain to her bilateral ankles, shoulder pain, and four dislocated toes (phalanges) on her left foot. She was hospitalized and had surgery.",1
"An employee was setting a truss on a tie-beam when he fell 20 feet to the ground. He suffered broken ankles, legs, arms, a broken neck and back and a fractured skull.",1
"An employee slipped and fell down stairs, breaking the right ankle.",1
"An employee was picking up roofing debris from the ground when a roll of roofing insulation fell and struck his leg, breaking it. He was hospitalized.",1
An employee suffered an index fingertip amputation while attempting to clear a jam.,1
"On March 16, 2019, an employee was using a knife to prepare a meal.  The knife slipped and cut the employee's thumb, amputating the end of it.",0
"An employee was dumping a residential garbage container into the hopper of a refuse truck when the container handle broke, causing the employee to fall backward on the pavement. He fractured his left hip.",1
An employee was installing a hydraulic cylinder onto a dump truck/bed when the employee's right thumb was pinched and lacerated between the hydraulic cylinder and the truck bed.,1
"An employee was attempting to clear a jam on a piece of equipment when the employee's finger entered a pinch point, resulting in a fingertip amputation. The equipment was locked out at the time.",0
"An employee was installing bolts on an electrical pole. The employee fell about 40 feet, suffering a shattered right ankle and a broken left heel. Fall protection was worn at the time.",1
"An employee was standing on a ladder trying to unclog a bark hopper using a high-pressure water hose when he fell from the third step (about 3 feet), then rolled over the ledge (about 3 feet) and onto a bark pile on a truck ramp. He was hospitalized with a fractured T-12 vertebra.",1
"On March 15, at 11 a.m., an employee was running a cable to the floor of a pulling unit when the employee was shocked by approximately 1,050 volts DC from the trailer truck. The employee was hospitalized with an electrical shock to the hands.",1
"An employee was auditing an establishment when the employee fell on the floor, breaking the left hip. The employee was hospitalized and had surgery.",1
"An employee was mounting a track assembly machine when the machine tipped over, pinning the employee underneath. The employee was hospitalized with a laceration to the left middle finger and a hairline fracture to the left fibula.",1
"An employee was feeding an assembled truss into a finish roller to press truss plates into place. The truss was not centered in the opening so it contacted the left vertical safety stop and the rollers stopped. He tried to reverse the roller, but it would not turn back on due to the safety stop being engaged and wedged against the truss tail. He attempted to pull the safety stop back into operating position. When he bent it around the truss, the rollers started moving and the tail of the truss went up the vertical safety stop and pushed his finger against the truss tail. His left pinky fingertip was pulled off the bone.",0
"An employee was cutting a piece of wood with a table saw. The saw blade cut the employee's hand. He was hospitalized, requiring surgery.",0
"An employee fell while walking down stairs, suffering a broken foot.",1
An employee was opening the door to a delivery trailer with the help of two other employees. He was hospitalized for treatment of a pinched nerve on his lower back.,1
"A car struck a temporary employee in an auto auction yard, causing broken ribs.",1
An employee was filling a pot that dispenses hot glue when his right hand contacted the glue and was burned.,1
An employee was installing a safety block in the dough press. The employee was attempting to insert a safety block into the press when the press came down while the employee's fingertip was between the block and the frame. The employee suffered a right middle fingertip amputation.,1
"An employee was tightening the east side of a slitter after a job change and checked to see if the mat was being cut properly. As he was checking, his glove was caught and his fingers were pulled into the compaction roller, de-gloving his left middle, ring, and pinky fingers and resulting in amputation.",1
An employee was feeding cards into a clam shell die cutting machine when the machine closed on and crushed his right hand resulting in amputation of the middle finger and thumb.,1
An employee was helping to asses a patient to be admitted into the acute stabilization unit when the patient poked him in the eye. He was hospitalized and required surgery.,1
An employee suffered an amputation to the left index finger while operating a tortilla-making machine.,1
"An employee was cutting material on a radial arm saw. The saw blade cut his left thumb, amputating the tip.",1
An employee was about to walk into a control room when the door closed on his right middle finger. He was hospitalized.,1
"An employee turned to talk to a member and tripped. She fell into the doors, scraping her face and injuring her back as she hit the ground. She suffered a neck injury and was hospitalized.",1
An employee was operating a foam fixture machine and placing lids in the working area when the top of the blow mold machine crushed the employee's right index and middle fingers resulting in surgical amputation of both fingers. The machine was unguarded at the time of the incident.,0
"An actuator got stuck on a rusted stud and did not release. An employee tried to unjam the actuator and it moved, pinching his finger against the base of the pipe. His right index fingertip was amputated.",0
"An employee was walking down stairs. An oil pipe fell on top of the employee, who suffered skull fractures, a contusion, and head trauma.",1
"An employee was walking in the parking lot from his vehicle to the building when he slipped on ice and fell, striking the ground. He sustained multiple fractured ribs and bruising to his spleen, requiring hospitalization.",1
An employee was removing a roller from a press machine when the roller frame moved up and caught the employee's finger between the stopper block and roller frame. The employee received an amputation to the right ring finger.,0
"An employee was adding water to a forklift battery when it fell, fracturing his legs.",1
An employee fell off a stool and was burned by hot cooking oil.,1
An employee was inspecting an overhead conveyor 9 feet above ground level. The employee's hand was entangled and crushed in the tension roller of an overhead conveyor belt.,1
Two employees were sliding a 150-pound metal I-beam across a deck. One employee's right hand was caught between the I-beam and the deck. The employee's right index finger was crushed.,1
An employee was about to flip a breaker when he suffered a burn to his right hand.,1
"An employee was on a truck, loading a customer's cargo bed. The employee fell from the back of the bed, suffering a broken arm. The employee was hospitalized.",1
"While at work, on a break, an employee was shot twice in the leg, once in the jaw, and once in the stomach.",1
"A case of pickles was about to fall. As an employee tried to stop it, his throat came into contact with the control handle of a pallet jack. His esophagus was crushed.",1
"A employee slipped on a kitchen floor, falling and suffering a broken right hip. The employee was hospitalized.",1
"As an employee exited his vehicle, his coat caught on the gear shift and the vehicle dragged him on the ground, breaking a vertebra.",1
"An employee was working in a chick trailer. As he was repositioning a flat hook (on a winch) attached to the last chick tray, the attached cable straightened out. His left hand was caught between the hook and the dolly and his index finger was crushed. The finger was amputated.",0
An employee was re-dressing a setting tool. The employee's right little finger was caught between the setting sleeve and a mandrel porthole. The tip was amputated.,0
"While setting up a pressure washer, an employee fell to the ground from a height of about 4 feet. The employee was hospitalized.",1
An employee suffered a ruptured spleen after a day moving heavy furniture.,1
"An employee was using a crane when a strap attached to a work bench broke and whipped back, hitting the employee in the hand and amputating the right middle finger.",0
"A trackhoe excavator backed over an employee's leg, injuring the leg and breaking the ankle.",1
A Rent-A-Center employee was picking up a couch from an offsite location. His right wrist was caught and crushed between a truck and its lift gate.,1
"An employee was working on a metal molding machine. He was removing a piece of metal from the mold when the machine activated, amputating the tip of his index finger.",0
"An employee was operating a forklift when it flipped, pinning and spraining the employee's ankle.",1
An employee suffered a thumb fracture while trying to fix a jam in a pallet sorting machine.,1
"An employee was bending a piece of 1-inch-thick, 6-inch-wide, 6-foot-long flat steel in a press fitted with a four-way die. One of the fins on the die broke, allowing the steel to fall and strike the employee's right leg above the knee. The employee suffered a contusion and swelling and was hospitalized, requiring surgery.",1
"An employee tripped on rocks and dirt at a construction site and fell, suffering possible broken ribs. The employee was hospitalized.",1
"An employee was trying to reignite a natural-gas-fueled torch when a flashover occurred, causing second-degree burns to the employee's hands and face. He was hospitalized.",1
"A packer lifted a 46-pound box containing packaging materials from floor level to a cart at waist level. The employee experienced severe pain in the lower back and down the leg and fell to the floor, unable to stand. The employee was hospitalized.",1
An employee was cleaning the scraper bar on a freezer belt exit. The employee's right ring finger was caught between the scraper and the belt; the top knuckle (right under the nailbed) and finger pad were amputated.,0
"The employee was cleaning scrap wood debris off the deck at a sawmill cant dock. He fell off the edge, landing on the floor 7 feet below and hitting his head.",1
"An employee tripped on the lip of a concrete pad near the rear entrance of a bus garage. The employee fell to the concrete, suffering a knee injury.",1
"An employee slipped and fell while descending a fixed ladder and suffered a broken rib, broken vertebrae, and a lacerated kidney.",1
"Two employees were servicing equipment. While a guard was being removed, it fell onto an employee's left hand, breaking two fingers. The employee was hospitalized, requiring surgery.",1
"On March 18, 2019, an employee fell from an airplane catering truck to the ground over 10 feet below. He suffered broken ribs, a collapsed lung, and an injured right shoulder.",1
"Two employees were cleaning on the back side of a coater, standing on decking 50 inches above the floor. One of them fell through a 2-foot-wide gap in the decking, suffering broken vertebrae, diabetic issues, and bruising.",1
An employee fell about 6 feet while dismantling scaffolding and suffered a broken right tibia.,1
"Two employees bumped into each other. One fell, suffering an injury to the right hip that required hospitalization and surgery.",1
"An employee was cutting a tree with a chainsaw when the tree fell. The butt of the tree rocked back onto the employee, breaking his right arm and left leg. He was hospitalized.",1
"An employee was unloading a tractor trailer, standing in the back with the door open. The trailer stopped and moved forward to realign; the employee fell out, suffering a dislocated tibia and a broken knee.",1
"An employee was using a dolly leg handle to lower a trailer so it could be connected. The handle slipped from his hands and it sprung back, striking him in the jaw and neck area, bruising his esophagus, and breaking his jawbone.",1
"An employee was taking a measurement when he contacted a power line, suffering injuries to a nerve in the right forearm.",1
"An employee tripped on an anti-fatigue mat in a production area and fell to the concrete floor, suffering a broken hip. The employee was hospitalized.",1
"An employee was exiting a room and reached to grab the exit door handle. Her hand slipped off the handle due to the resistance of the door, causing her to lose her balance and fall backward to the floor. She landed on and broke her right hip.",1
"An employee was holding a Goldberg fitting up to ductwork. The fitting fell and struck the employee's left forearm, lacerating an artery. The employee was hospitalized.",1
"An employee fell through a weak area on a roof, landing on top of a rack about 6 feet below and then falling another 12 feet to the ground level. The employee suffered a broken lower-back vertebra.",1
"An employee was applying tape to the loose trim on a paper roll. Her right jacket sleeve was caught in the shaft of the winder, pulling in her arm. She suffered a severe laceration of the forearm and a broken wrist, and was hospitalized.",1
"An employee was a passenger in a vacuum truck, which was traveling on a dump road at a client's site. The truck hit a washout and leaned to one side; the employee was bounced around in the cab and suffered a possible concussion. He was hospitalized.",1
"On March 18, 2019, an employee was discarding a toilet in a dumpster. The toilet shattered and deeply lacerated the employee's right forearm.",1
An employee was installing insulation in the 2x6 exterior wall on the third floor when he slipped and fell to the ground about 22 feet below. The employee suffered back and neck fractures.,1
An employee was on the lift of a delivery truck. The employee's foot was caught between the ramp and the lift gate while the lift was operated. The employee's big toe was crushed.,1
"On 3-11-19, around 8 p.m., an employee was moving a sheet of 1/2"" plate from a water-cutting machine using an overhead crane. He tried to transfer the plate from the overhead crane to the forklift by placing the plate on its edge on the floor and moving the forklift close enough to switch the plate clamp from the overhead crane to the forklift.  He lost control of the plate, which fell and struck his left leg.  He was hospitalized with two fractures and ankle dislocations.",1
"An employee was operating a 105-ton press. The press caught the employee's right hand, causing the partial amputation of the middle and index fingertips.",0
"An employee entered a restroom, tripped over the raised threshold, and fell on the floor. The employee injured his lower back.",1
"A pipefitter was climbing down a detachable ladder attached to the side of a flatbed truck. He fell off the ladder and struck the ground, suffering a concussion, a broken collarbone, and broken ribs.",1
An employee was holding metal inside a shear machine. The machine cycled and its guards came down onto the employee's left index and middle fingers. The employee suffered a broken middle finger and an index finger avulsion.,1
An employee suffered a fingertip amputation while cleaning a machine.,0
"An employee was adjusting a stack of pallets so they would interlock and could be moved safely by his forklift. The pallets clicked into place, and his left middle finger was caught between them. The tip was partly amputated.",0
"An employee was climbing a ladder to provide customer service when it shifted and the employee fell off the ladder, breaking his right arm.",1
"An employee was on an A-frame step ladder, rebuilding an inverted bucket trap. After loosening the six bolts holding the trap door in place, the employee was hit by hot condensate steam and suffered burns to the neck, upper arms, and chest area.",1
"An employee was under a crane in his truck. The crane picked up the reefer container the employee's truck was hauling. The container was still locked onto the employee's truck, which was lifted about 1 foot off the ground with the employee inside. He was hospitalized.",1
An employee was cutting an aluminum oxygen cylinder when it exploded. The employee suffered broken fingers and burns.,1
"While cribbing under equipment, an employee was crushed by a 60-pound load. The employee was hospitalized.",1
"An employee slipped and fell, suffering a hip injury. The employee was hospitalized.",1
"An employee had just lowered a partially filled carrier of wire onto a machine turntable and was disengaging the crane hook from the carrier. The hook raised, and the employee's left middle fingertip was amputated between it and the carrier.",1
An employee slipped on ice while walking into a building. Her head struck the concrete and she suffered a broken skull.,1
An employee was welding in a maintenance shop when the welder shocked him.,1
"Two employees were loading cardboard into a baler. The overhead door was closed, but the baler did not read that it was closed properly. When the door was re-closed, it caught an employee's right hand, causing an amputation to the index fingertip/print.",0
"An employee was cutting a 6-inch fire hydrant pipe with a handheld circular saw. The saw blade came up and struck the employee in the chin and chest, causing lacerations.",1
"At 6:30 p.m. on March 19, 2019, a temporary employee was operating a stacker machine. The magnet came up and pinched the employee's right middle finger against the product. The fingertip was amputated (without bone loss).",0
"An employee was cleaning the chain on a machine. The sprocket chain and gear caught the employee's right middle finger, amputating the tip.",0
"An employee was working on a helicopter engine when he slipped and fell on the engine firewall, lacerating his left forearm. He was hospitalized, requiring surgery.",1
An employee was loading a tire into a vehicle trunk when another vehicle struck the employee from behind. Both of the employee's tibias were broken.,1
"An employee was removing chicken parts from a jammed half cutter machine. The machine amputated the employee's right index, middle, and ring fingers.",0
"An employee tripped on a box and fell to the floor, breaking her right hip.",1
"An employee was working on a pad-mount transformer. An arc flash burned the employee's face, shoulders, and chest. The employee also suffered a broken ankle.",1
An employee was cutting cinderblock with a masonry saw and amputated his thumb.,0
"An employee was carrying a duct strap hanger and drill up a ladder. The employee fell 6 feet to the concrete floor, suffering head, left shoulder, and collarbone injuries.",1
"A temporary employee was welding an end plate on a beam. The clamp was on the beam and he was moving the beam to a vertical position when the beam fell on his right foot, causing the amputation of two toes. Steel toe safety shoes were worn at the time.",1
"An employee was reaching over a conveyor belt when a tear in the belt caught her glove, dragging her finger between the belt lacing and head roller. She suffered an amputation to the right middle fingertip.",0
An employee was walking across a crosswalk in a breast deboning department with a knife in his hand. He lost his balance and the knife punctured his chest and lung.,1
"While delivering mail and packages to an apartment building, an employee slipped on ice and fell to the ground. The employee suffered three fractures to the lower right leg.",1
"An employee was in a trench installing a storm drain. A dirt clod fell from the unprotected side of the trench and struck the employee, causing him to fall to the ground and break his left leg.",1
"At 11:10 a.m. on March 19, 2019, a janitor working near the loin saddle position on the main break of a cut floor suffered a right ring finger amputation when reaching to grab a hook that was caught in a conveyor.",0
"Employee fell from a dock to the ground, breaking three ribs and bruising his lung.",1
"An employee was climbing into the cab of his truck when his knee gave out and he fell out onto another parked truck, hitting the top step. He suffered a broken rib and a collapsed lung and was hospitalized.",1
"An employee was turning over an open caulk bucket with the metal lid partially attached. During this process, the open lid scratched the employee's right forearm, causing a 6-inch laceration to the underside that required hospitalization.",1
"A temporary employee was operating a pipe cutting machine and had his hand on a pipe when the machine was activated via the foot pedal. The machine engaged and crushed his right index finger, resulting in an amputation of the entire digit.",0
"An employee was working from a 16-foot extension ladder installing insulation. The employee was standing on the seventh step when he fell to the ground level. He received a broken left arm, bit his lip, and suffered bilateral cracked ribs.",1
An employee was walking down stairs and fell. The employee struck their head on a block wall on the opposite side of the hallway at the bottom of the stairs. The employee was unconscious and bleeding from a head laceration. The employee was hospitalized for a head injury.,1
"An employee was operating a trim saw when one of the chains on the material conveyor jumped the tracks. The employer shut down the saw and proceeded to disconnect the conveyor chain to move it into the correct tooth of the driver sprocket. Once the conveyor chain was loose, the injured employee lifted it out of its track to reposition it and contacted the sawblade, which was still spinning at the time, with the back of his hand. The spinning blade contacted all four fingers of the injured employee's right hand, completely cutting off the end of the little finger.  The injured employee's ring finger was not completely severed, but the second (middle) joint of this finger was completely cut by the spinning blade. The employee's middle and index fingers were mostly still intact, but deeply cut.",0
An employee was using a table mounted circular ripsaw and amputated a finger. The saw was unguarded at the time.,1
"At about 2:00 p.m. on March 20, 2019, an employee was walking down the steps of a client's home when she fell down six steps. She suffered bruised ribs, a nasal fracture, a possible bruised frontal lobe of the brain, and injuries to the left knee and ankle. She was hospitalized.",1
"An employee was attaching hooks and a sling to remove a battery. The hook came loose from the connection to the battery and swung, striking the employee who sustained a leg fracture.",1
"An employee was ripping plywood into 2 1/2"" strips with a table saw. He was toward the end of his rip cut when the blade hit a knot. His push stick and his right hand were pulled into the blade. He suffered cuts to the thumb and index, middle, and ring fingers; the index finger was cut through and had to be amputated at the second joint from the tip.",1
"While resting/on call in crew quarters, an employee was exposed to furnace fire fumes and began coughing. The employee was hospitalized for aggravation of asthma.",1
"An employee was assembling a roll. The shaft got stuck in the roll and as he used a press to force it out, he was struck on his left hand by flying metal debris (possibly the shaft). He left index finger was medically amputated.",0
"An employee was unloading industrial glass off of a roller conveyor when his glove was caught in the powered conveyor shaft. His left index, middle, and ring fingers were amputated.",0
"On March 20, 2019, an employee was towing material with a tugger. The employee's foot was caught between the tugger and a guardrail, sustaining broken bones. The employee was hospitalized.",1
"An employee was removing and installing skylights when the employee fell approximately 42 feet through a skylight to ground level, injuring the lower body and head. The employee was hospitalized.",1
"An employee was attempting to reposition a log that was hung on a conveyor belt when it moved and pinched the employee's left ring fingertip, resulting in a fingertip amputation.",1
"An employee slipped and fell from a ladder to the walking surface, suffering a broken pelvis.",1
"An employee was replacing the chain on a hose reel on the back of a delivery truck. As he was putting the chain on the sprocket, his left index finger was caught between the chain and the sprocket. The fingertip was amputated.",0
An employee was hospitalized after falling on ice.,1
An employee was turning on the water to a pump after replacing a broken flange. The upper pipe gave way and hot water caused second degree burns to the employee's face and hand.,1
"An employee was installing a 3"" schedule 80 line when the load shifted, pinning his lower left leg between the pipe and the ground. He suffered a fractured left tibia.",1
An employee was operating an ATV down a closed street on the jobsite and crashed. The employee suffered a dislocated shoulder and broken bones in the elbow and thumb requiring surgery.,1
"An employee was setting up and trying to adjust a barrel fan when it tilted and caught the employee's right hand, causing a middle finger fracture that required surgery and an index finger laceration.",1
An employee was exiting her car when she slipped on ice on the pavement and fractured her ankle. She was hospitalized for surgery.,1
An employee was setting angle iron in a machine when his right hand was caught between the machine and the machine's rail as the machine changed direction resulting in amputation of the thumb just below the knuckle.,1
"An employee was operating a motorized pallet jack. He picked up two pallets with the jack; the top pallet shifted, causing the bottom pallet to move as well. This caused the pallet jack to suddenly lower. It struck the employee's right shin and dropped onto his left foot. He was hospitalized for surgery on his foot.",1
"An insect bit an employee who was working at a café. The bite became infected, and the employee was hospitalized.",1
"An employee was shoveling left-over wet concrete from under a machine that made concrete blocks. He felt a sharp pain in his lower abdomen and was hospitalized, requiring hernia surgery.",1
An employee was operating a powered industrial truck when his leg was pinned to a guardrail.,0
An employee slipped on ice in the parking lot and fell fracturing her tibia and fibula.,1
"An employee was cutting plastic using a band saw. As he moved the plastic, his hand was caught by the blade causing a deep laceration on the left hand.",1
"An employee slipped off the second or third rung of the ladder on a cattle feeder trailer, falling approximately 2 to 3 feet.  When he landed, his hip hit a railroad tie and his head hit the corner of a concrete slab.",1
An employee was changing a saw blade when his right hand was caught on the chain/sprocket that holds the wood in place causing a partial amputation of the right ring fingertip.,0
An employee was hospitalized after a piece of plastic from the insert of a carpet roll broke off and punctured the employee's left eye.,1
"An employee was inserting a PVC pipe into a spindle mold machine. The employee's fingers were caught in a pinch point, and the employee's right middle fingertip was crushed/amputated.",1
"An employee was climbing into the cab of a crane when he lost his footing and slipped off the access platform, falling 5'8"" onto the concrete pavement below. He landed on his feet and suffered severe foot pain and broken heels.",1
An employee was setting a pallet and was struck by a forklift.  The employee sustained a laceration above the left knee requiring surgery.,1
"An employee was pushing a load on a pallet jack up an incline in a mushroom house. The load slid back toward the load backrest, and the employee's left thumb was caught between the load bin and the backrest. The employee suffered an amputation to the nail and bed of the left thumb.",0
"A temporary employee was walking alongside a skid steer, tripped and fell. His right hand was caught in the skid steer's track causing an amputation injury to the pinky finger.",0
"An employee fell down an escalator at the airport while traveling for work, suffering skull fractures.",1
A welder was welding a nipple to a tank when a flame shot from the tank opening and caused second degree burns to another employee's chest. The injured employee was hospitalized. There may have been some residual cleaning product left after cleaning the oil from the cut (2-inch hole) where the weld was going to be made.,1
"An employee was cutting a small piece of wood on a table saw. The wood jammed, and the sawblade amputated the employee's right little finger and cut two other fingers. The saw was guarded at the time.",0
An employee was changing the tooling on a press brake when the machine was activated via the foot pedal. This caused the machine die to crush and break his left middle and index fingers. He was hospitalized and had surgery.,1
An employee was cutting wood with a table saw when a part on the vacuum on the top of the saw came off and hit the employee. As he reached to grab the part his left thumb was lacerated.,1
An employee was using a saw when it amputated the employee's fingertip.,0
"An employee was trying to remove a board that had stopped a belt. The belt broke free and amputated the employee's left index, middle and ring fingers.",1
"While cleaning in an operating room, an employee slipped on a black anti-fatigue mat on the wet floor. The employee suffered an injury to the left ankle.",1
An employee was adjusting the tines on a forklift. A tine slipped back into place and amputated the tip of the employee's right index finger.,0
An employee was operating a circular saw when the circular saw jumped and contacted the employee's left thumb causing a fingertip amputation.,0
"An employee was cleaning up the warehouse and disposing of old inventory. While trying to compact the trash in a dumpster by standing on it, the employee fell out of the dumpster onto the ground and fractured the right arm.",1
"An employee was mixing feed when the transition (elevator leg) backed up. While he was clearing the backup, the system was turned back on and the employee was caught inside the machine causing a laceration to the back side of the employee's right arm between the shoulder and the elbow. The system was not locked out at the time.",1
A material handler was hospitalized with a knee injury that required surgery after taking a sharp U-turn in a tugger vehicle and falling off the vehicle to the floor.,1
"An employee was on a ladder removing insulation. The employee slipped and fell about 5 feet, suffering a jammed finger on the right hand and a head injury.",1
An employee was riding a pallet mule when his leg was caught between it and a stanchion. His tibia and fibula were crushed.,1
"An employee was moving AC units with a forklift. As a unit was placed on a wooden block, it pinched the employee's right index finger.",1
An employee was getting off an elevator when she starting having respiratory problems from the cologne of someone getting on the elevator.,1
An employee was reaching over to straighten an 1800-pound super bag filled with regrind material when the bag gave in. The super bag fell striking the employee in the shoulder and knocking the employee down. The regrind material then covered the employee. The employee suffered a broken left hip.,1
An employee was pulling a wire through a conduit when their left ring finger was caught in a tugger and partially amputated.,0
An employee was opening the overhead bay door at the back of the shop. His right middle finger was pinched between the cable and the roller and was medically amputated to the first knuckle.,1
"At 3:10 p.m. on March 21, 2019, an employee was trying to reset the gauge on an ID grinder. The parts loader cycled and pinched the employee's left index finger, causing an avulsion and later surgical amputation to the first knuckle.",0
"An employee was flushing a transloading hose with cresylic acid into an intermediate bulk container. The hose slipped out of the tote and splashed residual product on the employee's face, causing burns to his face and eyes.",1
Saw dust used to feed the boiler is off-loaded from specialized transport trailers to a drag chain conveyor trough. The trailers are equipped with a conveying system that is driven by a stationary motor and drive shaft at the facility. The trailers can be parked on opposite sides of the trough. The shafting from the motor connects to yokes on the trailer. There is a yoke on each side of the shaft to accommodate bi-directional parking. The injured employee was cleaning between the trailer and the trough on the side that was not connected to the shaft to the motor drive while the trailer was being unloaded. The employee's left arm was caught in the yoke on the trailer that was not connected and the upper arm was fractured.,1
An employee was manually pushing two sections of 3-inch pipe on two jack stands with wheels. One of the wheels on the stand struck a welders line (cable) and the jack stand stopped quickly and fell over. The pipe fell off the stand and struck the employee's left leg fracturing it.,1
"An employee was on an 8-foot ladder, helping repair a service bay garage door that would not roll up and down. The top three glass door panels fell, causing the employee to fall to the concrete driveway. The employee sustained a punctured lung and a cut on the head from the broken glass.",1
An employee was getting a box from a freezer while standing on a ladder. She fell from the ladder and broke her leg.,1
An employee was checking for an air leak under a pump control stand. A pinhole leak in a hydraulic line caused hydraulic fluid to be injected into the employee's right index finger near the tip.,1
"On March 21, 2019, a maintenance technician was working from an extension ladder to get to the ceiling of a structure to perform maintenance of a heater unit. The employee fell from the ladder, suffering head trauma and fractures to the skull and lower jaw. The employee was hospitalized.",1
"On March 21, 2019, a mail carrier was on route delivering mail when the mail truck door shut on their left middle finger amputating the fingertip.",0
An employee was performing a pressure plate test when a fixture came down on his right hand and amputated the thumb. The machine was not guarded at the time.,0
"An employee was preparing a steel frame to be painted. The frame fell, causing a laceration across the employee's forehead that required stitches. The employee was hospitalized.",1
An employee was climbing a fixed ladder and fell approximately 5 feet to the deck then rolled and fell another 3 feet to the ground. The employee suffered 2 broken ribs and head trauma.,1
"An employee was realigning two pieces of machinery on a press. An ejector plate retracted in the machinery, catching the employee's left hand and causing amputations to the index and middle fingertips.",0
"An employee was moving a metal plate with a crane. The plate moved/shifted while the employee was guiding it to set it down on top of another plate. The employee's fingers were caught between the two plates causing an amputation injury to the left middle, ring and pinky fingers.",0
"An employee was standing in a 6.5- to 7-foot deep excavation preparing to install a plastic drainage pipe when part of one excavation wall caved in, burying the lower half of the employee's body in dirt.  A large chunk of dirt also rolled against his upper body. He was hospitalized with fractures to the pelvis and several vertebrae.",1
"An employee working next to the filter house was blowing down a fan slab under the filter house hopper when his jacket sleeve became tangled in a rotating shaft, pulling his left arm into the shaft. He suffered a mangled left hand, wrist, and forearm.",1
"An employee was struck in the head, upper back, and shoulder by a heavy steel door and suffered a seizure. The employee was hospitalized.",1
"An employee felt abdominal pain while getting out of his truck. He was hospitalized, having suffered a hernia.",1
"An employee was attempting to straighten a digging bar that was wedged in a backhoe. When the bar moved, the employee lost balance and fell breaking the left ankle.",1
An employee was checking for air leaks on a coater when the hydraulic clamp that holds the coating rod in place struck his fingers and amputated his right index and middle fingers.,0
"An employee's left index finger was amputated as he was troubleshooting a machine. The machine was not locked out or guarded at the time, and was running.",0
"An employee slipped while ascending a stairway. He fell and his throat contacted the railing, suffering a contusion of the throat and a fracture to his neck.",1
"As an employee jumped approximately 5 feet from a rack to the ground, a broom leaning against the rack punctured the employee's midsection.",1
"On March 21, 2019, an employee was pouring molten aluminum into a casting when the aluminum contacted the employee's foot, causing severe burns.",1
"On March 21, 2019, a sign installer fell from a step ladder and suffered a head injury that required hospitalization.",1
The injured employee and a forklift operator were unloading bean totes out of rail cars. The totes are large fabric bags with fabric loops that are used to move the totes. The injured employee was guiding the forklift operator to place the forks into the tote's loops when the injured employee's right pinky finger was pinched between the forks and the loops resulting in a partial amputation.,1
"Three employees had moved a metal electrical cabinet (about 8 by 11 feet) for a new power wall at a new construction site. The cabinet was placed against a wall. While holes were being drilled in it, it tipped over and struck one of the employees. The employee was pinned beneath the cabinet and suffered injuries including a broken tailbone. The employee was hospitalized.",1
"An employee was working near a cure pot when its lid caught the employee's finger, causing an avulsion to the fingertip.",1
An employee was adjusting the forks on an electric pallet jack and crushed a right hand finger resulting in an amputation injury.,0
"An employee tripped over a piece of plastic wrap attached to a pallet. The employee fell to the ground, suffering a hip fracture.",1
"An employee's foot hit a shredding recycling bin as she walked. She fell on her right knee, injuring it.",1
"An employee was conducting steel erection activities. He fell approximately 12 feet to the ground below while descending a ladder from the steel structure and fractured his elbow, wrist, pelvis and leg. Fall protection was not connected at the time.",1
"An employee was hooking up a chain from the bucket of a backhoe to a trench box. The trench box was moved, and the employee's right ring finger was amputated.",1
"An employee stepped on a conduit, rolling and fracturing his right ankle. He was hospitalized.",1
"An employee slipped on paper trash on a kitchen floor and fell, suffering a broken right femur.",1
"An employee was removing slack from a sand line when the downhole tool hung up on a pipe scale. The tool slipped past the scale, creating tension on the line around the sand line drum. The employee's fingers were pinched between the line and the drum; his right thumb and index finger were amputated.",0
An employee was assembling/manufacturing a pneumatic press when the press activated and crushed his right hand. The employee sustained muscle damage and a laceration to the hand and required surgery.,1
"An employee tripped over a yellow cement barrier, suffering a broken leg.",1
"A transfer vessel was about to be pressurized to clear a blockage; an employee was standing in front of the discharge piping, holding a sheet of plywood to prevent material spillage. Air suddenly released from the discharge piping at 70 psi, forcing the plywood into the employee's face and throwing him about 15 feet. He suffered a fractured orbital socket, a laceration above the eyebrow, and a subdural hematoma.",1
"An employee was kneeling between the rear end of a crane load (an aircraft tug) and the crane's outriggers. While the back end of the tug was being lowered, it swung toward the employee, striking him and pinning him against an outrigger. He suffered a broken jaw, a collapsed lung, and broken ribs.",1
"An employee received a partial amputation to his right middle finger while attempting to secure a load on a tractor-trailer at their facility. Air was released to lower the rollers on the bed of the truck; the employee's right hand was pinched in the rolling slots, causing an amputation to his middle finger.",0
"An employee slipped and fractured a leg while walking in the lobby of the north campus location of Staten Island University Hospital, requiring hospitalization.",1
"On Friday, March 22, 2019, two employees were lowering material in a wind turbine after repairing a turbine motor. A 6-foot-long tool fell from more than 90 feet up, striking an employee on the ground and causing head trauma.",1
"A window assembler was setting completed mulled windows (about 6 feet wide and 8 feet high) onto the shipping cart (4 feet deep and 8 feet long). When he went to maneuver the cart containing the seven mulled windows to set more windows, some of the windows fell off the cart and onto him. He was hospitalized for a spinal cord injury.",1
An employee was moving a round bar stock from the pan to the saw when the bar slipped. The employee grabbed it and their left thumb was crushed between the bar and the saw arm. The employee was hospitalized with a fractured left thumb.,1
"An employee was working on a sub-roof assembly approximately 13 feet high. The employee was pushing down on a pry bar and lost balance, falling 13 feet to the ground. The employee fractured both legs and the left wrist.",1
"An employee fell while walking down stairs, landing on the floor and suffering fractured ribs and a head contusion/hematoma.",1
An employee contacted the moving auger while cleaning it. The employee sustained three fractured fingers and tendon and nerve damage. The auger was not locked out/tagged out at the time.,1
An employee fell from the curb while crossing the street and hit their knee on the ground. The employee suffered a dislocated right knee.,1
"An employee was using a rebar bending machine. The machine caught the employee's finger, causing the amputation of the fingertip.",0
A roll that was being handled by hoisting equipment shifted and knocked an employee to the ground. The employee suffered a fractured hip.,1
"An employee was operating a tractor with a hay bale spear attachment. The employee was attempting to spear a round hay bale weighing 800 to 1500 lbs. when the hay bale was pushed off the flatbed truck and struck the truck driver who was retrieving a strap on the ground below the bales. The truck driver sustained a dislocated hip, broken ribs, a punctured lung, a back injury and a facial laceration.",1
"An employee lost balance and fell, suffering broken wrists.",1
"A forklift struck a scissor lift, causing the employee inside the scissor lift to fall. The employee suffered a facial fracture and a broken right collarbone.",1
"An employee was cutting a pack of patio umbrellas when his pocket knife stabbed his leg, cutting the femoral artery.",1
An employee was putting a guard back onto the warper machine after cleaning the machine to remove cotton fibers. The guard slipped and landed on his left index finger amputating the tip.,0
"An employee was test-driving a Humvee when it flipped over. The employee suffered head lacerations requiring stitches, as well as broken cervical bones. The employee was hospitalized.",1
"An employee was walking through the office when she slipped and fell on the floor that was wet from rain, injuring her head and face.",1
An employee swung their leg over to climb down a baker scaffold. Their pant leg caught on the frame causing the employee to fall approximately 4.5 feet and suffer a fractured tailbone.,1
An elevator technician was trapped under an elevator.,1
"An employee tripped on nylon plastic banding and fell to the floor, suffering a broken kneecap and a head laceration.",1
An employee was operating an order picker when it struck a storage rack system. The employee suffered a broken pelvis.,1
An employee was cutting wood shims on a table saw using a push stick with his right hand. He used his left hand to hold a wood piece. His left hand slipped and struck the blade amputating his thumb.,0
"A welder ignition arced into a nearby container of brake cleaner/oil, which caught fire. An employee was caught in the flames and suffered burns to the arms, shoulders, face, and neck.",1
An employee was loading a 400-pound roll of plastic bags into a bagging machine and pinched his right ring finger between the shaft and the cradle causing a fingertip amputation.,0
"An employee was working on a load dock. The plate struck the employee's head, knocking the employee unconscious and causing a concussion. The employee was hospitalized.",1
An employee was struck by a forklift while taking inventory. The employee suffered an open fracture of the left ankle.,1
"An employee was cutting a steel beam, about 15 feet long and weighing about 5,000 pounds. The beam reacted to the heat and split in half lengthwise, landing on top of the employee. The employee suffered two broken ankles, a broken knee, and four to six broken ribs.",1
An employee was working on a cyclone fan and amputated the tip of his left thumb on the blade.,0
An employee was carrying a pipe stand when he lost his footing and fell to the ground. The stand smashed his hand. His right ring finger was injured and had to be amputated.,0
"An employee was cleaning a mixer from the outside. The auger caught the employee's glove, amputating the tip of the thumb.",1
"An employee was working on a compressor valve. As the cap was being removed, the valve blew off. It struck him, causing a laceration above the eye and injuries to the wrist, midsection, and ankle. He was hospitalized, requiring surgery to the ankle.",1
An employee was removing a metal drain cover when it slipped out of his hand and pinched the tip of his right middle finger.,0
"An employee tripped in a parking lot and fell to the ground, suffering broken teeth, a concussion, hand abrasions, and a swollen knee. He was hospitalized.",1
"An employee was securing a line from the vessel to the dock when a line struck him in the lower leg, causing a compound fracture that required surgery.",1
"An employee was standing on the fifth step of an 8-foot A-frame ladder, painting a set piece. He lost his balance and fell to the floor, breaking his right tibia.",1
An employee was loading a container onto a garbage truck. He was about to lock in his truncheon bar when the mechanism was turned on. He suffered an amputation to the left index finger.,0
"An employee was part of a four-person crew that was removing a form after a concrete pour was set. A crane tried to pull the form off a concrete column, and the wire rope guideline hung up on something. The employee tried to release the guideline; the employee's right hand was caught between the form rebar and the guideline. The employee suffered a pinch-type amputation of the right index, middle, ring, and little fingers.",0
An employee tripped over an angle iron while walking at a jobsite and was hospitalized for a knee injury that required surgery.,1
An employee was working on a conveyor belt and was trying to adjust the belt when he slipped and fell into the belt and roller. He fell on the ingoing nip point of the belt and was hospitalized for a fracture and a burn on his left hand.,1
"While exiting an oil change bay, an employee was struck by a vehicle pulling into the bay. He suffered a laceration and damage to his right ear.",1
"An employee was cutting plastic wrap. The tip of the employee's utility knife broke off and struck the employee's eye, causing an eye injury requiring stitches; the employee was hospitalized.",1
"Three employees were moving new tires from a stack onto a rack at the back of a store. The stack of tires fell on one of the employees and he fell backwards, striking his head on the floor. He suffered a head contusion and was hospitalized.",1
An employee was cutting cable with a knife and severed tendons on his left thumb.,1
"While moving from one work station to another, an employee was struck by a moving piece of pipe. He suffered a broken rib and a collapsed lung.",1
"An employee was cutting lumber with a chainsaw. The saw made contact with the employee's left foot, causing a laceration and bone fracture. The employee was hospitalized.",1
"An employee was working on the top of a flatbed trailer when the employee slipped and fell from the edge of the trailer while coming down, suffering multiple leg fractures and requiring hospitalization.",1
An employee suffered a broken right ankle while turning to walk.,1
"An employee was training another driver on how to operate a yard truck. While riding on the back of the truck, the employee was caught between the truck and trailer. Both of the employee's legs were broken.",1
"At about 2:30 a.m. on March 25, 2019, an employee was using a modified hydraulic press with a knife tool to remove defective vinyl grips from new hammers. While the employee was retrieving a hammer, his right middle and ring fingertips were caught between moving and stationary parts, causing amputations.",0
An employee was aligning bolts on an excavator counterweight weighing 4400 pounds during assembly. The counterweight slid sideways and pinned the employee's left arm between it and the surface level causing a fracture below the elbow.,1
"An employee was hanging up a DC electric gun. The employee's foot got tangled up in the gun's power cord, and the resulting twisting/pulling motion caused a broken left hip.",1
"An employee fell on a staircase at a home being built, suffering head trauma with concussion, a shoulder injury, and rib damage.",1
An employee was on a stand-up counterbalance forklift when his leg was caught between the forklift and a building column. He suffered crushing injury and a broken bone in the lower leg.,1
An employee was replacing a motor on a platform in the production area. The employee's left hand was on the motor when the chain shifted and pinched the tip of his middle finger between it and the motor causing a fingertip amputation.,0
"An employee was in the wash bay area, turned, tripped on a water containment curb and fell face down. The employee suffered head and neck injuries.",1
"A press operator was helping to change out a press stamping die. The die was rolled from the press and onto a cart; the press operator's left ring finger was pinched between the die and the cart, sustaining a partial fingertip amputation.",0
An employee suffered a fingertip amputation and lacerations on two additional fingers while operating a wood jointer.,0
"An employee was cutting lumber with a table saw. The saw nicked the employee's left little finger, amputating the tip.",0
"An employee was using a wrench to get a conveyor back on track when the wrench slipped, causing an injury to the employee's right index finger that resulted in a finger amputation.",0
A temporary employee was operating a forming station. A robot carrying hot thermoplastic composite struck the employee.,1
"While walking down a hall, an employee tripped over a box and fell to the concrete floor, breaking her left hip.",1
An employee was guiding an oil rig elevator while rods were being pulled. His right hand was pinned between the elevator and a rod and was amputated.,1
"Two employees were repairing a filter fence around a storm drain. A semi-trailer lost its two back wheels, which struck the employees. One of the employees was hospitalized, having suffered a broken wrist, ribs, fingers, and shoulder along with head trauma.",1
"An employee was trying to remove a piece of wood or staple that was stuck in an underpinning machine. The machine activated, catching the employee's left little finger and causing an amputation to the tip.",0
"An employee had just dropped mail through a mail slot when a dog came through a screen door and bit her right calf. She fell to the ground, and the dog removed the calf muscle from her leg.",1
"An employee was walking up onto a barge via the steps between the two tow knees. The tow boat and the barge made full contact, and the employee's right foot was crushed between the two vessels.",1
A temporary employee was cutting lumber using a saw and amputated the tip of his left thumb.,0
"An employee was moving/positioning a rolling barricade when the employee tripped and fell to the pavement, fracturing the left hip.",1
"An employee was moving a propane storage cabinet. The dolly and the cabinet hit together and the cage flopped back, hitting the employee's right ring finger. The fingertip was amputated.",0
"An employee was pushing a muffled cart on a non-energized roller. The employee's left hand was caught between the steel and the roller, causing the amputation of about 1/8 inch of the index fingertip.",0
"An employee was helping to manufacture a trailer and attempting to remove a sheet of metal off of a cart when the metal sheet fell. The employee attempted to grab the falling sheet, which lacerated the employee's left hand. The employee was hospitalized.",1
"An employee was picking product from baker-style rolling carts. While moving the middle of three carts, the employee's left middle finger was caught between carts and the fingertip was amputated.",0
An employee was installing balcony railings and fell from the second floor to the ground resulting in a fractures to his spine.,1
"An employee was welding an 24-inch diameter flange to a pipe that was attached to a weld positioner. The flange and the pipe combined weighed approximately 1,500 to 1,600 pounds. The employee went into the pipe to check the completed partial weld on the opposite end of where the positioner was located. The employee's feet were hanging outside the open end of the pipe. The weld broke causing the pipe and the employee to fall to the floor. The employee's feet were caught between the beveled ended of the pipe and the floor. All of the employee's toes on his right foot were amputated and the big toe on his left foot was fractured.",0
An employee tripped and fell in the office parking lot while conducting her safety surveillance walkthrough of the property site. She fractured both wrists.,1
"While unloading freight, an employee was struck by a falling box, suffering a neck injury.",1
An employee fell from the steps of his truck to the ground below. He suffered torn ligaments on both knees.,1
"While working as a spotter, an employee was struck by a 3,000-gallon plastic tank that fell from a forklift. The employee suffered a broken left tibia and ankle.",1
An employee was attempting to restrain an aggressive student when he fell backwards and struck his head on the floor. The employee was hospitalized for a concussion.,1
"A bundle of folded corrugate fell on an employee, knocking the employee to the ground. The employee suffered a broken nose and a concussion and was hospitalized.",1
"An employee fell while descending a 28-foot ladder, suffering two broken wrists.",1
"An employee was on the second level of an aircraft maintenance platform installing tags on equipment. The employee stepped on a hole cover and it gave way, allowing the employee to fall 9 feet to the concrete floor. The employee sustained head trauma, five fractured ribs, and a fractured L5 vertebra.",1
"A temporary employee was cutting wood with a miter saw when his hand contacted the blade, causing a left thumb amputation. The saw was guarded at the time.",1
An employee suffered a hip injury while moving furniture.,1
"An employee fell to ground level while installing a wall form, suffering a femur fracture.",1
"An employee was banding coil when it fell over and hit his leg, causing lacerations.",1
"An employee was walking down stairs when the employee missed a step and fell approximately 10 steps to the bottom of the stairs, breaking a bone in the neck.",1
"An employee was inserting a sheet of corrugated cardboard into a machine. The machine was activated, catching the employee's left hand. Four of the employee's fingers were injured.",1
"An employee was playing volleyball with the residents, twisted an ankle and fell to the ground. The employee sustained a broken shoulder as a result of the fall.",1
"An employee was mowing the green on a golf course when the mower's tire got caught on the edge of a retaining wall. The employee jumped from the mower and landed on a ledge about 5-6 feet away, suffering fractured back vertebrae.",1
"An employee was cleaning grain spillage adjacent to a running conveyor belt when the employee's arm was caught in the belt and pulley, resulting in a broken radius and ulna in the left arm. The employee was hospitalized.",1
An employee lost his fingertip while operating a lift gate on a truck.,0
"An employee was using a steel brush to clean glue from the lay-up machine when the steel brush was caught in the rollers. The employee's right hand was then lacerated by the steel brush and rollers, requiring hospitalization.",1
"An employee was breaking a bolt on an engine head with a breaker bar when the bolt gave way, which caused the employee to smash his hand into the engine head. He suffered a laceration to his left middle finger and crushed part of the bone.",1
"An employee was attempting to perform physical intervention techniques on an agitated individual in a bus seat while other employees were calming the agitated individual. The agitated individual head-butted the employee, who was hospitalized with a concussion, fractured nose, and bruising to the lip/cheek.",1
"An employee was repairing a door on a shipping container. A 4-by-4 piece of lumber, being used to brace the door, fell onto the employee's right hand. He suffered a partial amputation to the right ring fingertip.",0
"The injured employee was standing next to a metal beam to connect it to a wooden beam. An excavator bucket hit the 2,000-pound metal beam, which in turn knocked the injured employee to the ground. The beam then landed on the employee's right hip/thigh, injuring it. The employee was hospitalized and underwent surgery.",1
"An employee was using measuring tape to shoot grade when he slipped in mud and fell, striking his face above the right eye. He suffered a cracked sinus cavity and required stitches above his right eye.",1
An employee was using a braider machine and suffered an amputation.,0
"A bundle of piping was being moved with a crane, with an employee holding onto the tagline to guide the bundle through an opening. A pipe was dislodged from the bundle and struck the employee in the forehead, knocking the employee unconscious and causing an open laceration and a small skull fracture above the eye. The employee was hospitalized.",1
"An operator was working at the north end of a strip table with another operator at the south end of the table at a nylon unwrapper. The operator was trying to keep the 3/8"" pole on the rollers to help the pole spin as the nylon was being removed from the pole. The end of the pole got caught in a roller and the operator's hand got tangled together with the pole. When the operator pulled his hand out of the entanglement, his right middle fingertip was amputated. The finger was also broken below the amputation point.",0
"An employee was cleaning a dough mixer machine when the mixer's spinning blade contacted his hand, causing a laceration and broken bones. The machine was in operation at the time of the incident.",1
"A Probst Group employee was inspecting a leaking line inside a 5-foot trench when the east wall of the trench caved in on him. His legs were compressed and he sustained a fracture to his pelvis, requiring hospitalization.",1
An employee was helping to load a rice tote on a railcar. He was near the edge of the platform when he fell off the platform (2 feet) and broke his femur.,1
An employee was using the escalator to access the second floor while holding shopping bags when she fell down the escalator and fractured her right leg.,1
"On March 26, 2019, an employee slipped down an embankment, hitting a post and suffering fractures to the face.",1
"An employee was driving a golf cart around a warehouse. The cart went under a storage rack and the employee was pinned between the rack and the cart, suffering head and chest injuries.",1
An employee was helping to change over a material hopper that used compressed air. The employee's left index finger was caught in the gate as it closed resulting in a fingertip amputation.,1
"An employee was moving a 72-inch industrial magnet (weighing 8,460 pounds) on steel sawhorses. The employee was repositioning the sawhorses while the load was suspended from a crane. A weld securing the magnet broke. The magnet fell on the employee's left index finger, crushing it against the sawhorse. The finger was amputated at the first knuckle.",0
"An employee was removing the straps that secured wall panels that weighed approximately 2000 pounds to the wall of a semi-trailer. The panels fell onto the employee causing multiple contusions to the left arm, sternum and head.",1
"An employee was transferring cleaned printing dies from a vertical drying rack back to a horizontal storage rack, about 4-6 feet away. As she turned toward the storage rack, she slipped on the printing plate and fell to the concrete floor, breaking her hip. She was hospitalized, requiring surgery.",1
An employee was moving box lids on a conveyor. A knuckle chain caught his right hand and severely smashed part of his index finger. The finger was medically amputated to the first knuckle.,0
"An employee was on a step ladder installing a low voltage telecommunications cable when he fell from the step ladder to the concrete below, suffering a bruised lung, broken ribs, and a dislocated and fractured shoulder and elbow. He was hospitalized.",1
An employee was walking near an operating backhoe. The bucket struck the employee and fractured three ribs.,1
"An employee was retrieving a bottle cap from a de-capper machine. The mechanism caught the employee's right hand, lacerating it. The employee was hospitalized.",1
"Employees were moving a 500- to 600-pound shaker that was about 6 feet tall and 4 feet in diameter. As the employees were loading the shaker into the bed of a truck, it fell over and struck a temporary employee in the left knee. The employee suffered muscle damage.",1
An employee was sedating an aggressive dog for grooming when the dog bit the employee's hand. The bite wound became infected and required hospitalization.,1
"An employee was stripping a floor with a chemical stripper, which got into his boot and burned him.",1
"On March 26, 2019, at 10:15 p.m., a maintenance employee was working on the loader of an extrusion machine when the ram drifted forward and caused the loader to drop on the employee's left leg, pinning it against a lower tie-rod.",1
An employee was slicing cucumbers using a food processor and amputated the tip of her left middle finger.,0
"An employee was working with two other employees, standing on a work platform, and using two chain fall hoists to remove a 2600 lb. pulley out of the active coke pellet conveyor. When the pulley was hoisted out of the conveyor slot, the weight of the conveyor changed and the pulley moved and pinched the employee's toe between the pulley and its box/container. The employee suffered a partial amputation of the right big toe.",0
"An employee was operating a packaging machine when a package bag became misaligned in the machine. As he tried to fix the position of the bag, his left hand was caught by the sealer/cutter of the machine, resulting in the amputation of three fingertips.",1
"An employee was trying to clear cement from a cement silo knife gate. The gate closed on his left hand, amputating the tip of his little finger.",0
"At 11:30 a.m. on March 26, 2019, an employee was on the lift gate of a truck when it was raised and pinched his middle toe against the truck. He was hospitalized, requiring surgery.",1
"An employee was operating a forklift when the forklift struck a tank under pressure and knocked off a valve. High-pressure water struck him, causing contusions to the lower legs and left buttock.",1
"An employee was standing behind a lowboy trailer, and attempting to unload an excavator. His left hand was underneath the winch cable when the winch line activated, pinching the employee's left index finger between the roller and winch cable. The employee's fingertip had to be surgically amputated.",0
An employee was riding outside on the running boards of an SUV as another employee was driving the SUV. He fell off and was hospitalized with a fractured clavicle.,1
An employee was repairing an air conditioning unit on a truck. The unit's alternator belt amputated the tip of his left middle finger.,0
"An employee's foot became caught on a carpet protector, causing the employee to fall forward to the ground. The employee was hospitalized with a broken humerus, bruised rotator cuff, and sprained wrist.",1
An employee was unjamming a rubber calendar mill and got a hand caught in the rollers. Multiple fingers were amputated.,0
An employee smelled spray paint which aggravated a respiratory condition. The employee was hospitalized.,1
"An employee was cutting wire away from a bar joist that was being held/moved by an excavator. The excavator was moved, and the joist struck the employee in the back. The employee suffered back pain and broken ribs.",1
"An employee was in an elevated scissor lift, repairing vertical struts on the outside of a building. The scissor lift was elevated over an overhead crane; the crane moved and struck the scissor lift, knocking it over. The employee suffered a broken ankle and a lumbar fracture.",1
"An employee was standing on a concrete form, pumping concrete. The pump drew in air and it caused an air hammer in the line, knocking the employee from the form. He suffered broken ribs, a broken arm, and other injuries.",1
An employee was working around the metal grate for a concrete inlet. The employee's fingers were pinched between the grate and the concrete; the employee suffered severe lacerations and the possible amputation of a fingertip.,1
"An employee was cleaning out the rear of the company van and when he closed the rear door, his right thumb was caught in the gap between the hinges. The tip of the thumb was partially amputated.",0
An employee was hand-feeding the end of a plastic roll into the nip point of a forming roller machine when the machine amputated the employee's left middle finger and partially amputated the left ring finger.,0
"An employee was assisting a crane and flipped a duct panel when the employee fell and was struck by the duct panel, injuring the pelvic bone.",1
"An employee was lowering the boom of the manlift. The manlift basket became entangled with a rope attached to a pulley used to hoist screens and tools to the top of the plant. As the manlift descended it put tension on the rope which broke the gantry frame. A section of the frame struck the employee's head/shoulder area. The employee lost consciousness and sustained multiple fractures to his skull, face, shoulder and ribs. The employee was wearing personal protective equipment at the time.",1
"While working on a propane gauge, an employee suffered severe burns to the chest, abdomen, and legs.",1
An employee was cutting a block of graphite with a bandsaw. The saw amputated the employee's left thumb right above the knuckle.,1
"An employee was cleaning out a trailer when chemical hydrated lime slurry splashed on his chest, causing burns and an infection.",1
"An employee was loading thermal paint into tanks for heating when he contacted the metal edge of the cover opening, severing his right pinky and ring fingers just below the nail.",0
An employee was observing a conveyor after repair. The conveyor cycled and the employee's right index finger was caught in the chain and sprocket resulting in a partial amputation. The machine was not guarded at the time.,0
An employee fell down from a deck platform.,1
"At 6:45 p.m. on March 27, 2019, an employee was operating a stand-up forklift in reverse. As the forklift approached a stack of filters, the employee's left little finger was crushed between a pallet in the filter stack and the vertical safety bar on the forklift. The finger was broken and part of it was amputated.",0
"While walking toward a parking lot, an employee tripped on a forklift tine and fell to the ground, fracturing his hip.",1
"While stocking shelves in a grocery story, an employee suffered a head injury. Disoriented and with a forehead laceration, he was hospitalized.",1
An employee was cutting steel with a torch when their shirt caught on fire and the employee was burned.,1
"An employee was attempting to change some broken belts on a dust collector when the guard slipped down and lacerated his right index fingertip, resulting in a fingertip amputation. The dust collector was locked out at the time.",0
An employee was cutting wood with a miter saw. The saw lacerated her left hand.,1
"An employee was adjusting a hydraulic torque wrench to attach a fluid end when a second employee engaged the high torque controls, resulting in an amputation of the first employee's right middle finger.",0
"On March 27, 2019, a maintenance employee was attempting to free a jammed chain inside of a hoist when the chain moved, causing an amputation to the employee's left index fingertip.",0
"The motor on the side of an oil tank, approximately 3-4 feet off the ground and weighing about 585 pounds, fell off a skid and landed on an employee's leg. The employee suffered an open fracture of the left tibia and fibula, as well as a laceration of the left middle finger.",1
"On March 27, 2019, at 8:45 PM, an employee was attempting to clear a clog when the employee's left middle finger was struck by a rotating mixer blade, resulting in a broken finger and partial amputation.",0
"An employee was holding a butterfly valve to adjust it prior to installation. The injured employee asked a second employee to apply compressed air to the valve. When the compressed air was applied, the valve actuated to the closed position, pinching the injured employee's left thumb tip between the disk and the valve body. The employee suffered a laceration/amputation to the left thumb above the knuckle.",1
An employee slipped and fell in a hallway breaking her femur.,1
"An employee was on a baker scaffold when one of the wheels rolled off a curb. The scaffold tipped over and the employee fell about 8 feet to the ground, breaking his left humerus, clavicle, wrist, ribs, and pelvis.",1
"At about 1:00 a.m. on March 27, 2019, a driver unhooked a chemical delivery hose at a customer facility and was sprayed with a corrosive chemical (45% caustic potash). He was hospitalized. Personal protective equipment was not worn at the time.",1
An employee was operating a tortilla making machine when the employee's left hand was caught between a piston and a door. The employee's left hand and wrist were crushed.,1
An employee suffered chemical burns to both arms and legs when her arm entered a container holding caustic residue.,1
An employee was attempting to clean a tail pulley from a conveyor system. The tail pulley caught his shirt and pulled him into the conveyor. He suffered a cut on the left arm. The machine was not guarded or locked out/tagged out at the time.,1
"An employee tripped and fell, breaking her right hip.",1
An employee amputated the tip of his finger while moving a terrain park rail.,0
"An employee was using a vacuum to suction sand out from the bottom of an air filter bed used to filter fiberglass during paper production. The employee stepped down from a plywood plank being used as a temporary work platform; the employee's foot got caught between two dividers in the filter bed, causing the employee to fall. The employee suffered a torn anterior inferior tibiofibular ligament and was hospitalized, requiring surgery.",1
An employee was operating a hoist when the hoist retention hook failed causing the hoist to fall and strike the employee on the head. The employee sustained a head contusion and laceration.,1
"An employee was prepping a foundation for a concrete pour and walked behind an active excavator. As the excavator was turning, the employee was caught between the counterweight and a wall causing a broken pelvis.",1
"At 11:30 a.m. on March 27, 2019, a paramedic suffered a slipped disc in the lower back while lifting a 350-pound patient into an ambulance. He was hospitalized.",1
"An employee was using a hammer to disrupt a bridge of sugar inside of a storage vessel. The employee was outside the vessel. The hammer was dropped into the 12"" x 12"" auger inspection opening. As the employee retrieved the hammer, the auger started and the employee sustained broken bones and lacerations.",1
An employee was using a drill with a hole saw attachment to cut holes for bar ties on a wall form. The drill's chuck snagged his work glove and his left little finger was amputated.,0
"An employee was walking on the rafters in an attic while blowing fiberglass. He stepped on a 2-by-4 board, which slipped out of place, causing him to lose his balance and fall through the ceiling. He suffered a broken right elbow and three compressed vertebrae in his back.",1
"An employee was drilling into a concrete wall with a rag in hand. The rag became tangled in the drill, which then amputated one of the employee's fingertips.",0
An employee was checking the chlorinating system of water wells when the employee removed a section of tubing from the chlorinator and inhaled chlorine gas.,1
"An employee was trying to take readings inside a 480-volt electrical disconnect panel. An arc flash caused burns to fingers on both the employee's hands, as well as the employee's left wrist. Personal protective equipment was being worn at the time.",1
"An employee had placed a dog on a drying table after bathing when the dog bit the employee's lower left arm, causing two puncture wounds.",1
"An employee was manually pushing an industrial cart/buggy by a container when his finger was caught between the cart and the container, resulting in an amputation of the left ring fingertip and nail.",0
"An employee was in an elevated scissor lift, running wires to light ballasts. The lift fell over and the employee fell with it to the cement floor. The employee suffered two broken ankles, a broken pelvis, and a broken vertebra.",1
An employee was operating an electric pallet jack when his leg was caught between the jack and the racking system. His ankle was broken.,1
"An employee was operating a reach truck (stand up forklift)and struck a metal support beam. Her left leg was caught between the operator's cabin of the reach truck and the beam, causing a compound fracture that later required removal of the leg below the knee.",1
"An employee was driving a hustler pulling a container in the middle lane towards a crane when he veered to the left lane and hit a crane stopper. A seat belt was worn at the time of the incident. He suffered back, neck, and knee injuries and was hospitalized.",1
An employee was adding yarn to the slasher machine when his hands were caught in the machine.,1
"An employee was directing a forklift operator to push a skid into a trailer when the forklift struck the employee, who suffered broken ribs.",1
"An employee was attempting to unclog a drain when his left pinky was caught in the drain snake, resulting in a fingertip amputation.",0
"On March 28, 2019, an employee was manually operating an automated guided vehicle (AGV) when the AGV swung around and collided with another AGV. The second AGV struck the employee's leg, pinning and breaking it between the two vehicles.",1
"At 6:00 p.m. on March 28, 2019, an employee was repairing a machine from underneath it. The machine was hit and fell onto the employee, causing a rib contusion and bruises.",1
An employee fell to the ground while exiting a van and sustained a broken right hip.,1
"An employee was sitting at a computer printing paperwork. When she stood up, she tripped on a cord and fell, striking her left hip on the desk and floor. She broke her upper left leg.",1
An employee was pushing a linen cart through a doorway when her right-hand  fingers were crushed between the cart and the door. Her middle fingertip and nailbed were amputated.,0
"An employee was loading mail carts when a cart fell, hitting the employee in both legs and injuring them.",1
An employee was riding a horse in a barn. The horse startled and she fell off; the horse landed on her. Her right leg was broken.,1
"An employee was refilling a juice container when a coffee container stored above the juice on a shelf fell and hit the employee's head, causing a laceration.",1
"Two employees were walking down an aisle in a warehouse. A forklift's rear wheel ran over the left foot of one of the employees, causing crushing injuries. The employee was hospitalized.",1
"An employee was helping unload a food service truck. As he was putting the ramp on the back of the truck down, the ramp caught his left index finger, causing a partial amputation that required surgery.",1
"An employee had to remove a plug from one furnace to allow molten aluminum to move along a trough to another furnace.  When he removed the plug, the molten aluminum splashed out of the trough and went on his pant leg and into his open boot, traveling into the bottom of his shoe and burning the bottom of his foot. Proper PPE was not worn at the time of the incident.",1
"A driver was delivering a zero-turn lawn mower that was strapped to a pallet to a customer. While unloading the shipment, it fell and landed on the driver's side and leg causing multiple rib fractures and a fractured left fibula.",1
"Employees were at a drydock, lifting a section of fin tube onto a foot pad. An employee's gloved hand was caught between two fin tubes. The employee was hospitalized; one of the employee's fingertips was amputated (with no bone loss).",1
An employee was welding an exhaust hood when the welding wire punctured his right index finger.,1
"An employee was on a finished section of the roof of a single-story house during a reroofing job. He slipped and fell off the roof, breaking his left arm. He was hospitalized.",1
"An employee was blowing down a conveyor when he slipped and his hand was caught between two rollers, causing a hand injury.",1
"An employee was testing a transformer when the employee suffered an electrical shock, receiving burns on both palms. The power supply was not turned off at the time of the incident.",1
An employee was using a piece of wood to move a metal tube on a lathe. The lathe amputated the employee's left thumb above the nail.,1
"An employee was on top of an 18-foot flatbed trailer, delivering trees (stacked two high on the trailer) to a nursery. He fell from the trailer to the ground 8 or 9 feet below, suffering broken ribs and a collapsed lung. He was hospitalized.",1
"An employee was unjamming a palletizer when the machine actuated, striking the employee and causing facial/head injuries. The employee was hospitalized.",1
"An employee was jumping over a wooden railing that separates the property when the employee fell to the ground, breaking the right leg and ankle.",1
An employee was helping another employee take inventory when the mast of a forklift caught his right ring finger. The finger was partially amputated.,0
"An employee was working from a 6-foot step ladder inspecting a duct detector when he fell from the fourth step of the ladder to the ground, fracturing his tibia. He was hospitalized and had surgery.",1
"On March 28, 2019, an employee was cleaning a wood planer when the rotating blade caught his glove. He suffered amputations to two fingers on his right hand.",0
"An employee attempted to depressurize a roller to change out the guide paper on the pouring line. While depressurizing the roller, another employee moved a roll of paper that contacted the injured employee's right thumb tip, resulting in a partial amputation.",0
"An employee was rolling a 15-inch by 12-foot pipe off a trailer. When the pipe started to roll, a band clamp on it bent. The pipe caught the employee's glove and pulled the employee off the trailer. The employee's wrist and hand were crushed under the pipe; the employee's thumb was amputated and other fingers were crushed, with skin torn off exposing bone.",1
"The injured employee was supervising another employee who was operating a track skid steer loader during a backfilling excavation. The operator lost control of the skid steer and rotated toward the injured employee's path, striking him on the chest with the bucket. He suffered five to seven broken ribs and a possible collapsed lung.",1
"At about 7:00 a.m. on March 4, 2019, an employee slipped on ice in a parking lot. The back of the employee's head struck the asphalt pavement, causing a concussion. The employee was hospitalized.",1
"An employee was using an overhead crane to set 12-by-10 box culvert. His left hand was caught between two structures, and the index finger and thumb were crushed and broken.",1
"On March 28, 2019, a temporary employee was working inside the USS Iwo Jima's 50-foot tank from a mid-level platform, marking up areas needing repairs, when he fell 17 feet to the bottom of the tank. The platform was unguarded and personal protective equipment was not worn at the time of the incident. The employee was hospitalized with a head contusion and a broken arm.",1
An employee working in a bucket of bucket truck approximately 16 feet above the ground was securing a steel support strand to a building facade when a tractor trailer hit the steel support strand. It detached from the building and struck the employee causing a broken right arm and facial lacerations.,1
"An employee fell down stairs, suffering a broken right femur.",1
"An employee was working from a scissor lift, dismantling pallet stacks. The racks collapsed and knocked the scissor lift to the ground. The employee suffered a head laceration, a fractured elbow, a left hand contusion, a laceration to the right hand, broken ribs, a partially collapsed left lung, and a ruptured spleen.",1
An employee was fixing rollers that were not rolling on a conveyor when his right hand was caught in the pinch point area. He was hospitalized with a dislocated and lacerated right hand.,1
An employee was assisting a forklift driver with moving flanges. The last flange fell over. The  employee walked over to stand the flange up. The employee picked up the flange and it slipped from his hand. The employee's left ring finger was crushed between the flange and a pallet and amputated.,0
"An employee slipped and fell to the floor while delivering food, suffering a hip fracture.",1
"An employee was picking oranges when an orange tree branch scratched his left eye, causing blurred vision.",1
"An employee fell while coming down a ladder, dislocating his arm. He was hospitalized.",1
"An employee was trying to set a dock plate. A truck was moved so that the plate could be reset, and the plate reverted to its resting position. The employee fell to the ground, suffering a broken leg and broken ribs.",1
"A temporary employee was standing on a truck loading gate when the employee fell to the ground, fracturing an ankle.",1
"An employee fell while descending a fixed ladder to a lower-level roof. He fell 5.5 feet, landing on his feet and suffering a broken right leg.",1
An employee was being trained on a walkie stacker when her left thumb was caught between the handle and a storage rack. The thumb was broken.,1
"An employee climbed up the side of a pallet to secure a strap when his foot became tangled in a plastic covering. He lost his balance and fell to the trailer floor, fracturing his humerus. He was hospitalized and had surgery.",1
"An employee was performing maintenance on a weaving machine when his right middle finger was caught in the machine, crushing/shattering the bones in his finger.",1
An employee was cutting welding wire from a welding machine's welding head when he was struck from behind by the welding machine boom and knocked into a steel pipe that was being loaded onto the welding rack. He suffered a ruptured intestine and torn ligament in the right leg.,1
An employee was taking dirty dishes into the back of the store when she slipped on a wet spot and fell onto her back fracturing the T9 vertebra.,1
"An employee was transitioning from a ladder to the fender step of a ready-mix truck when the employee slipped and fell approximately 3 feet to the ground, suffering a fractured tibia.",1
"An employee was attaching a base frame and mast section together on a hoist when his right middle fingertip was caught between the base frame and mast section, resulting in a fingertip amputation.",1
An employee's right thumb was crushed while the employee was moving a pre-conditioner. The thumb suffered an amputation injury.,0
"An employee was unstacking a pallet when her foot got caught in plastic wrap. She fell to the floor, breaking her left leg.",1
"An employee was rigging on a project to remove large pieces of scrap material when the foundation of the structure gave way, causing it to fall on the employee. The employee suffered a cracked rib and cut on the head.",1
"An employee was going to a store to get balloons for an in-store event when she tripped on the sidewalk and fell, hitting her shoulder on a brick pillar and sustaining shoulder fractures.",1
"An employee was replacing coolant on a chiller. The pump leaked propylene glycol on the floor and the employee slipped and fell, tearing a hamstring. The employee was hospitalized.",1
An employee was boring a fly wheel when his hand entered the boring machine and his finger was caught between the fly wheel and the cutting bar. His left ring finger was amputated.,0
An employee was cutting a log when his chainsaw cut his leg.,1
"An employee was working on a roof. The fall protection system the employee was using fell at a gap in the roof, pulling the employee with it; the employee fell 30 feet, suffering maxillofacial and wrist injuries, and was hospitalized.",1
"An employee slipped and fell off a ladder to the ground, breaking an ankle and requiring hospitalization.",1
"An employee was climbing down a fixed ladder when the open end of a stanchion caught a ring on his finger. He suffered a severe laceration to the third phalange, resulting in a partial amputation.",1
An employee was in a boom forklift that had a box attached to it cutting down a tree to clear power line. The employee was in the box. After cutting down the tree it fell towards him and he jumped from the box to avoid it. He fell on a ladder and fractured his leg requiring surgery.,1
"On March 29, 2019, an employee was offloading cypress boards from a machine. The machine caught the employee's shirt and pulled his right arm through, crushing it. The employee suffered a broken right arm and a severed primary nerve in that arm. He was hospitalized.",1
"An employee was strapping down plastic water barriers on a lowboy trailer. A gust of wind knocked a barrier into the employee, knocking him off the trailer. He fell about 2 feet to the ground and suffered a broken hip. He was hospitalized.",1
An employee was placing a steel jamb near the opening of a rotary forging furnace and was struck by the steel jamb when it fell causing a contusion injury to the right calf.,1
"A pickup truck backed into an employee, knocking him to the ground and breaking his right hip.",1
A well tender was putting methanol in a dump-line when the nipple broke off the line. Methanol sprayed into the employee's face and eyes; the employee was hospitalized.,1
"An employee was walking to a table when he fell, hitting his head on the table or a chair. He developed a knot and a cut.",1
"An employee was loading a docked trailer with an electric pallet jack. The trailer moved, creating a gap that the employee fell through to the ground. The employee suffered a dislocated right ankle and broken right foot.",1
An employee was attempting to close the swinging gate in the central hospital when a bovine hit the metal gate causing the employee to fall to the ground. The employee fell on concrete and sustained a concussion.,1
"An employee was in a warehouse, standing on a pallet on the second level of a rack. The employee fell to the floor, suffering broken vertebrae and ribs.",1
An employee was repairing a meter. The meter's glass cover shattered and the employee's left wrist was lacerated.,1
A security guard was trying to quell an argument between two park patrons when they began fighting. The guard was grabbed from behind and thrown to the ground and the two patrons fell on her. She suffered broken ribs and a head injury.,1
"An employee was picking up a box in a meat room. He struck his head on a steel beam as he stood up, suffering a brain bleed.",1
"At about 10:00 a.m. on March 30, 2019, an employee dismounted a backhoe. The backhoe rolled into the employee, pinning the employee between the front bucket and a storage trailer. The employee was hospitalized with a fractured pelvis and a perforated intestine.",1
An employee was going to retrieve a part stored in an auto parts storage cage when he tripped and fell to the floor breaking a hip.,1
An employee was carrying curb forms and experienced chest pain and fell to the ground.,1
The injured employee was operating a forklift in aisle CB while another employee was operating a forklift in aisle CA. The forklift in aisle CA pushed elevated stock into aisle CB and a plastic skid fell and struck the injured employee on the head. The employee was hospitalized for a concussion.,1
"An employee was working from a ladder, removing a tile from a ceiling. The employee fell from the ladder to the floor, suffering a broken left elbow.",1
"An employee was loading a vehicle when an automatic loading dock pinned the employee's toes, causing partial amputations to three toes.",0
An employee was loading equipment onto the seat of his golf cart. He turned around to get some more equipment when something fell off the seat and hit the pedal causing the cart to move forward. The employee attempted to catch the cart when he fell and hit his head.,1
"An employee was attempting to pull an exchanger using an air winch and a pulley. A chain securing the winch broke, causing the winch to lurch forward. The winch struck the employee in the leg, causing a broken left femur.",1
"A truck driver had parked a truck, carrying a container, under a crane. The crane picked up the trailer and took the truck with it, lifting the truck about 10 feet. When the crane lowered the truck, equipment inside the cabin injured the employee's neck, lower back, and right arm. The employee was hospitalized.",1
"Hot water spilled out of a pasta cooker onto a cook, causing burns to the right side of his body that required surgery.",1
"An employee was walking with a client at a diner when she tripped on a rug, fell, and broke her right arm.",1
"On April 1, 2019, an employee was struck by a forklift, resulting in an injury to the right calf that required hospitalization and surgery.",1
An employee injured his hand while using a press brake.,1
"An employee was on an aerial man lift inspecting a roof when the employee contacted a powerline, suffering second/third degree burns on the right arm from the bicep to the wrist.",1
"An employee was applying pipe dope to a thread on a tool joint. His left hand was caught between a lifting sub and elevators, causing crushing injuries that led to the total amputation of the pinky and ring fingers and partial amputation of the middle finger.",1
"An employee was cleaning a sauce depositor head when the machine's photo eye was tripped. The machine's filler head actuated and caught the employee's right index finger, causing a fracture and partially amputating the fingertip.",0
"A driver was positioning a truck for loading at a dock. The driver had gotten out of the cab to place a metal plate between the dock and the truck bed when the truck rolled into the driver, causing a broken left femur.",1
"An employee was working at the eave of a roof when rotten wood in the fascia, decking, and trusses gave out, causing the employee to fall to the ground. The employee suffered a laceration to the right cheek and a broken bone in the right shoulder.",1
"An employee was using a metal shear when a hold-down foot pinched his finger, causing a crushing/amputation injury.",0
"An employee was unloading cardboard from a flatbed truck when the employee missed a step and fell to the cement floor, injuring the right cheek and shoulder. The employee was hospitalized.",1
An employee experienced back pain while carrying a 20 lb. box by rope to the next level.,1
"At about 3:30 p.m. on April 1, 2019, an employee was operating an angle broom machine. A bundle of broom bristles had not loaded correctly in the feed table; the employee was straightening the bundle when the machine cycled, amputating the employee's left little fingertip.",0
"On April 1, 2019, an employee was bending tubes on a CNC tube bending machine when the employee's finger was caught between the dies and material, resulting in an amputation.",0
"While walking down a flight of steps, an employee missed a step, causing him to fall and land face first on the concrete ground. He received several lacerations and fractures to his face.",1
"An employee was standing behind a registration desk when she fell, suffering a broken left leg.",1
An employee was clearing a paper feed jam when the knife cycled and amputated his left middle fingertip. The knife was guarded at the time of the incident.,0
"An employee was exiting a truck. Two of the truck's side steps had been torn off and the employee fell to the pavement, suffering a broken pelvis.",1
"An employee slipped on ice in the parking lot and fell to the ground, suffering a broken hip.",1
"An employee was preparing a crane to load a sheet of metal on a plasma table. The employee straddled the spreader bar to unhook it from the crane, attached a plate clamp, and then stepped over the spreader bar while raising the clamp. The clamp snagged on the lip of the spreader bar, which tipped over. The bar struck the employee's lower left leg, breaking it.",1
"An employee was using a cutting torch with oxygen and acetylene when the hose caught fire, resulting in burns to his left thumb.",1
An employee was installing/splicing bulkhead sheet piling when the employee's hand was caught between sheeting. The employee was hospitalized with a hand fracture.,1
"While operating a CNC lathe machine, an employee was caught in the part. The employee suffered head trauma and was hospitalized.",1
"An employee was cleaning a plate with a grinder. Sparks caught the employee's shirt on fire, causing burns to the right hand and right abdomen.",1
"An employee was walking through the cafeteria when she walked into a door on the bulletin board, fell backwards to the floor, and injured her left hip, femur and pelvis.",1
"An employee was pushing a 40-foot goose neck trailer down a finish line when the chain broke, causing the employee to fall and hit his head on a metal rack. He was hospitalized.",1
"An employee was using a ladder to access a roof. He fell about 10 feet to the grass/concrete ground, suffering wrist, forearm, and pelvis injuries.",1
An employee was conducting maintenance on a free pump when the pump amputated the employee's left middle fingertip.,0
An employee was using a water hose to clear material out of the discharge end of a screw auger of a tender truck. The employee's fingers were pulled into the discharge end of the auger; two fingers were amputated.,0
Two employees were using a telehandler forklift with an adjustable spreader bar to transport rebar at a construction site. When the load was lifted off the ground the spreader bar beam slipped off the forks and struck the employee on the right leg fracturing it.,1
"An employee was cleaning a reject from a press machine when the rollers came on. The employee's right index, middle, and ring fingers were caught between the rollers; she suffered a soft tissue amputation to the tip of the index finger, a missing nail on the ring finger, and a scratch on the middle finger.",1
An employee pulled a lower back muscle while lifting a 50-pound bucket. The employee was hospitalized.,1
"An employee was cutting paper with a manual cutter. The cutter cut off the top of his left thumb to the bone, requiring surgery for a skin graft.",1
"At 10:00 p.m. on April 1, 2019, an employee was on a pallet jack, transferring and lifting equipment. The jack lost power after hitting a bump in the floor, and the employee fell off it and struck his head on the concrete. He suffered a severe head injury and brain bleeding.",1
"An employee was standing on a cart tipper when he fell 3 feet to the ground. His right leg was caught and his left leg hit the ground, breaking the femur.",1
"An employee was laying rebar next to a roadway when an oversized load of wooden trusses on a truck struck the employee in the back, fracturing three ribs and both shoulder blades.",1
An employee was cutting angle iron when the hold-down mechanism smashed the tip of his left middle finger. The employee underwent a medical amputation to the finger.,0
"An employee was guiding a customer's vehicle as it reversed. His right arm was caught between the vehicle and another, stationary vehicle. The forearm was broken.",1
"An employee was walking across a highway when a motor vehicle struck him, breaking his right hip.",1
An employee was stepping up on concrete stairs and slipped and fell on the stairs. She fractured her right femur.,1
"An employee was bucking a fir log when the tension released, launching the log into the air. The log landed on the employee, resulting in two fractured vertebrae in the neck, one back vertebra fracture, five broken ribs, a broken clavicle, a punctured and collapsed lung on one side, a partial collapsed lung on the other side, multiple contusions and scrapes, and a chipped tooth.",1
"An employee was adjusting/moving an aluminum float during a concrete pour when the 30-foot long float swung outside of construction working limits and contacted a 13,200 volt primary power line. The employee received electrical burns to both palms.",1
"An employee was participating in an observation training tour to learn about other locations. He was on the outside perimeter of a substation when he stepped into an uneven portion of natural ground, fracturing his right ankle and leg. He was hospitalized.",1
An employee was standing up from a desk and began to walk away when she tripped on a cord underneath the desk. She fell to the ground and fractured a femur.,1
"An employee was pushing and pulling carts inside a shop area. The front cart got stuck on a ball bearing on the floor and the second cart continued moving, catching the employee's left middle finger between the two carts and amputating the tip.",0
"An employee was unbolting an I-beam when it fell on his right foot, resulting in the amputation of four toes.",1
An employee was threading a carding machine when the employee's left middle finger was caught in the threading rollers resulting in a fingertip amputation. The machine was not guarded at the time.,0
An employee hit the back of his head on a metal spout.,1
"At 3:00 p.m. on April 2, 2019, an employee was setting a frac pump in place. While a Pitman arm was being pulled into place, it struck him in the left leg, causing a dislocated ankle and fractures to the tibia and fibula. He was hospitalized.",1
"An employee was stacking boxes for loading onto a van. A package struck her from behind, causing her to fall. Her left knee struck the floor and the kneecap was broken. She was hospitalized for surgery.",1
"An employee was changing the plastic film on a machine when her glove became caught in the film, resulting in the right wrist being crushed by the machine.",1
"An employee was using an infrared gun to check the temperature of hot mix that was being loaded into an elevator to feed a silo. The flames rose, burning his face and neck.",1
"An employee was trying to remove a board that was stuck vertically in a mill stacker reject bin when it moved toward instead of away from him and it hit his hand. The board caught his finger, causing an amputation.",0
"An employee was holding a flashlight for another employee who was doing maintenance on a downhole sucker rod pump. The second employee was installing a plunger back into the rod pump, using a pry bar. The bar slipped and the plunger was propelled out of the pump toward the first employee. It caught his right hand and carried it downward, pinching the third finger against the fender of the pump. He suffered an avulsion and partial amputation of the finger.",0
An employee fell off a roof to the ground and suffered a back injury.,1
"An employee was trying to close a flatbed trailer door. He stepped off a two-step ladder he had used to reach the door's handle. As he lowered the door, his middle finger was caught between the bottom of the handle and the top of the ladder, causing the amputation of the finger from the first knuckle.",0
"On 4/02/2019, an employee was approximately 6 feet off the ground on an 8-foot ladder, hand-adjusting a wire on ducting/sheet metal that was being hung. He became unbalanced and fell to the concrete floor, fracturing his left upper arm and requiring surgery.",1
"An employee was opening a disk grinder while grinding a metal plate when his glove was caught in the grinder, causing a severe laceration to the left index finger that resulted in a fingertip amputation.",0
An employee had just finished loading metal products onto a flatbed trailer and was attempting to egress the flatbed trailer by stepping on the frame of an adjacent machine when the employee fell approximately 3 to 4 feet to the ground. The employee was hospitalized with broken bones (including a compound fracture) to the left tibia and fibula.,1
An employee suffered an asthma attack after being exposed to potential chemical fumes while working in the laundry room.,1
"An employee was working on a ladder resting on a wooden plywood platform. As the employee was climbing down the platform, the plywood came loose and broke. The employee then fell 6 feet off the ladder and broke an ankle.",1
"An employee was feeding material into a machine when the employee's left pinky finger was pinched between the material and the machine, resulting in a partial left pinky finger amputation.",0
"An employee was helping a sheet metal foreman measure a small sheet metal roof over the dock. The employee walked onto the sheet metal roof and fell through a flush skylight on the canopy.  He fell 16 feet, landed on some 55-gallon drums, bounced, and ended up on the dock concrete flooring. He was hospitalized with broken ribs, broken vertebrae, a punctured lung, an injury to the other lung, and a damaged spleen.",1
An employee was adjusting the installation of a PDC drill bit on a horizontal grinding machine. The grinding wheel started and his right glove and index finger were pulled between the wheel and the surface to be ground. He suffered a partial amputation of the finger.,0
"An employee was in a dry laundry area packing line. When the employee opened a door to adjust a rail, a chain and sprocket caught the employee's left hand, causing cuts and amputations to the index finger (tip amputation), middle finger (amputation to the second knuckle), and ring finger (amputation from tip to nailbed).",1
"On April 2, 2019, an employee was holding onto a hoist chain with one hand and placed the other hand above the hoist block. As the employee pushed the load away from the handrail, the employee's glove pulled the employee's right hand into the hoist block, pinching the fifth digit between the chain guide and hoist chain. As a result, the employee suffered a right pinky finger distal phalanx fracture and soft tissue avulsion, requiring hospitalization and surgery.",1
"An employee was using a box cutter to remove a zip-tie on a tote when it slipped and cut his left arm, severing an artery. He was hospitalized and required surgery.",1
"An employee was pressure-testing a valve outside when it broke and struck his left leg, fracturing his pelvis and lower leg.",1
A temporary employee suffered an index fingertip amputation while attempting to free a package that was stuck on a conveyor belt.,1
"An employee was operating a pneumatic bell press that had a two-hand trip. The employee attempted to adjust a part when the employee's finger was caught between the part and the point of operation, resulting in a right middle fingertip amputation. The machine was activated at the time of the incident.",0
Employees were swabbing a well when a lubricator came down and smashed an employee's left index and middle fingers. The fingers were amputated.,0
"An employee was moving a mat from the asphalt at a golf course and stepped on a sod staple, puncturing the left foot and requiring hospitalization and surgery.",1
"An employee was hooking up a sling for an excavator to move a piece of concrete pipe when the excavator operator pulled up on the sling, crushing the employee's left hand between the pipe and teacup.",1
"An employee grabbed a stop bracket to pull himself across while underneath a trailer tightening up rear-frame attaching bolts. His left middle fingertip was caught between the rear frame and stop bracket, resulting in a fingertip amputation.",0
"An employee was receiving freight when the loading plate malfunctioned and would not move up. The employee tried to move the plate with his hand, and the dock plate was knocked back and hit his right hand, resulting in an index fingertip amputation.",0
"An employee fell to the pavement in a parking lot, breaking her arm.",1
"On April 2, 2019, an employee was cutting garbage can tops with a jamb saw. The saw jammed and went out of control, lacerating the employee's wrist. The employee was hospitalized.",1
"An employee was using a tool to clear a jam in a mechanical power press. When the jam cleared, the stop gate activated, catching the employee's right hand and resulting in the amputation of the right ring and middle fingertips.",0
"An employee was sweeping ash off a kettle when trapped moisture caused molten zinc to pop after steel was submerged in the kettle. The molten zinc contacted the employee, causing second degree burns.",1
An employee fell from a flatbed trailer as he tried to secure the load. He landed on the ground and suffered a broken right wrist.,1
"An employee was taking a half-keg of beer off his truck. The keg fell onto his right ring finger, crushing it and causing the amputation of the fingertip.",0
"An employee was on a riding lawn mower when it tipped over into an embankment. The lawn mower fell on top of him resulting in collapsed lungs, fractures to the wrist, ribs, collar bone, shoulder blade, and cheek bone as well as cuts to the left ear and wrist.",1
"An employee slipped in a hall and fell to the floor, suffering a broken left arm and shoulder.",1
"An employee was working on a second floor deck and fell through an opening in the tool floor approximately 6 feet 8 inches to the first floor deck. He was hospitalized with a cervical strain, concussion and abdominal pain.",1
"On April 3, 2019, at approximately 2:00 AM, an employee was MIG (metal inert gas) welding on a steel bridge cord. A piece of hot silica (slag) fell into the employee's left boot causing a severe burn to the bottom of the foot.",1
"At 2:00 p.m. on April 3, 2019, two employees were removing meat from bones when they began fighting. As the first employee punched at the second, the second raised both arms. The first employee's right wrist was cut by a 6-inch flexible boning knife that was still in the second employee's hand.",1
"An employee was on a raised platform with an inspector, trimming fat from a carcass using an 8-inch knife. As the carcass moved down the line, the knife nicked an artery in the employee's forearm, requiring surgery.",1
"An employee was walking through a facility when she tripped on a wire that was hidden beneath the seat. The wire wrapped around her ankle, causing her to fall and break her knee. She was hospitalized.",1
"An employee was changing a 5-ton compressor on an HVAC unit using an acetylene torch. While applying heat to the discharge line, residual oil/freon that had been expelled during brazing ignited, causing first and second degree burns to the upper chest and face.",1
An employee was folding a lift gate after delivering a package to a customer. The gate pinched the employee's right middle finger; the tip had to be medically amputated.,1
An employee was walking across the workroom floor to retrieve a scanner when she slipped on a puddle of water and fell onto her left side resulting in a fracture to the right femur.,1
An employee was using a router machine and got caught between two tables on the router machine resulting in a pelvic injury.,1
"An employee was transporting a box placed on the seat beside him on the forklift. The box fell while the forklift was in motion. The employee reached down to retrieve it and lost control of the forklift while going down a ramp. When the employee tried to regain control, he was ejected from the forklift and injured his hip.",1
"An employee tripped while stacking electrical conduit and fell to the floor, suffering a broken left arm.",1
"An employee was insulating an AC duct pipe in a ceiling area about 10 feet above ground level, using an 8-foot A-frame ladder. He fell to the ground, injuring his head and breaking his left femur. He was hospitalized.",1
"An employee was prepping to band material when the material tipped off the staging area and struck the employee's leg, fracturing it.",1
"While walking in a blast freezer hallway, an employee was struck by a forklift and suffered a broken lower right leg.",1
An employee was walking into a building when she tripped and fell. She suffered a broken left femur and an injured left knee.,1
"An employee was working from the third step of a 6-foot A-frame ladder when it fell over. He fell onto the ladder and the concrete floor, suffering a lacerated spleen, multiple rib fractures, and a broken left foot/ankle. He was hospitalized.",1
"An employee was helping a resident shower when the resident dropped a tissue. As the employee bent over to pick the tissue up, the employee suffered back pain due to two herniated discs, requiring hospitalization.",1
"An employee was working on a 24-inch PVC pipe when it struck the employee, causing broken ribs and possibly collapsed lungs.",1
An employee was dismantling masonry scaffolding with a partner from a six-foot ladder.  When he pulled one end of the 2x8 boards free the other end also broke free and caught his gloved left pinky finger in a pinch point between the board and a steel pipe. The fingertip was amputated.,0
"An employee was unplugging heat tape used in an exterior drain spout from an electrical box. The box was positioned so that the employee had stand on a grate to access it; the grate gave way and the employee fell into the window well about 90 inches, suffering broken ribs and four broken vertebrae.",1
"An employee was replacing a bearing assembly on the outside of a weighted feed bin. After repairs were completed, the employee was putting the completed assembly back into the feeder housing when the feeder coil suddenly retracted into the feeder housing. His finger was pinched between the bearing cap and the feeder housing, resulting in a partial amputation and open fracture to the left middle finger. The motor on the feed bin was locked out at the time.",0
"On April 3, 2019, at about 9:10 a.m., a temporary employee was hydro-blasting inside a tanker trailer when he slipped backward. The hydro-lance crossed his left foot, causing lacerations that required hospitalization.",1
An employee had been attaching barricade tape when their right foot was fractured by a crane's outrigger.,1
"An employee was operating a ride-on zero-turn mower in a sloped residential yard. The mower slid off course and the employee landed on its blade, suffering amputations to the right first and second toes.",0
"An employee cut a piece of wood on a table saw and was reaching to grab the leftover stock when the employee's thumb struck the saw blade, severing a tendon.",1
"An employee fell while walking, and a paring knife he was carrying stabbed into his abdomen.",1
An employee had a heart attack while at work. The employee was descending a utility pole when he began to present symptoms.,1
"While an employee was using a chainsaw to trim a coconut tree, the chainsaw kicked back causing lacerations to the left forearm and bicep.",1
"A cable installer at a residential single family home hooked his ladder over a metal strand line, climbed up the ladder and hooked up his fall protection to the strand line and began diagnostics on the communications line. A splice on the strand line failed resulting in the ladder and the employee falling 18 feet to the concrete driveway below. The employee sustained fractures to the elbow and pelvis.",1
Two truck drivers got into a fight; one suffered injuries to both eyes and was hospitalized.,1
An employee was filling chemical bottles with sanitizer when the sanitizer entered the employee's boot and caused a severe chemical burn to the top of his foot. He was hospitalized.,1
An employee was taking the plug out of a press. The forks of a forklift had been placed under the plug so it could rest on them when it was unbolted. The employee was unbolting the plug when the forks slipped. The plug fell and crushed the employee's right hand and wrist.,1
"An employee fell from planter racks and suffered a broken right ankle. The employee was hospitalized, requiring surgery.",1
An employee was opening a valve when they slipped onto a concrete barrier and broke three ribs.,1
An employee was holding a cat during a nail trim when the cat bit the employee.,1
An employee was standing on an extension ladder to trim a bush when he fell approximately 4 feet off the ladder to the ground. His ankle was fractured and required surgery.,1
An employee was approached by a dog while delivering mail. He fell and injured his right ankle.,1
The injured employee (mechanic) was troubleshooting a box truck and asked another employee (Employee 2) to go inside the truck. The mechanic told Employee 2 to press on the break and push on the accelerator to hear the sound the truck was making. The mechanic was under the truck when it came off the jacks and rolled forward striking the mechanic and causing rib fractures and trauma to the chest.,1
"An employee was riding an ATV when he lost control and jumped off, fracturing his tibia and fibula.",1
"An MWD tool was being picked up with an air hoist. As it was being lifted and was about 8 feet off the ground, it slipped out of the lifting clamp and fell onto an employee. The employee suffered bruised vertebrae.",1
"An employee was on top of a trailer delivering acid when a 2-inch valve came loose, hitting the employee in the face.  He suffered missing teeth and facial fractures, requiring hospitalization and surgery.",1
"An employee was operating a stand-up powered industrial vehicle near a racking system. The vehicle moved under the rack and the employee's arm was trapped, suffering multiple breaks.",1
"An employee returning from a meeting was walking down the stairs and fell. The employee suffered a head injury, lost consciousness and was hospitalized.",1
"Two mechanics were trying to reposition a crooked race inside a pit furnace that was preventing the furnace cover from closing properly. One of the mechanics was at the upper end of the furnace using a long, steel tool to strike the race in an attempt to pry it loose. The second mechanic was near the bottom of the furnace, checking the position of the race after each attempt to move it. The steel tool  struck his hand and amputated his right ring fingertip.",0
"An employee was cleaning the top of a mixer using an air hose. The employee fell from a platform to the concrete floor, suffering a broken wrist and a concussion.",1
"A border agent was riding on an ATV, chasing after a group of people. The ATV hit a rut with deep vegetation. The agent was thrown from the ATV and suffered broken ribs, a broken collarbone, and a punctured lung.",1
"An employee was using a floor-operated crane to haul a steel beam. The beam struck a stationary beam, which fell and pinned the employee's left leg. The employee suffered a torn ligament in the leg.",1
"An employee was lowering the flop chute on the back of a cement truck. As he was unfolding the flop chute, his right pinky finger was pinched between the sections of the chute and amputated.",0
An employee was carrying a container of a corrosive solution that is used to wash produce. The solution leaked onto the employee's pants and caused a chemical burn to the upper left thigh that required hospitalization.,1
A dumpster attached to a forklift by a chain was being lowered when the dumpster hit an employee's left foot. The employee sustained a fractured big toe requiring hospitalization.,1
An employee was hospitalized with head and neck injuries after falling to the ground while skiing down a trail.,1
An employee was driving a golf cart when his left leg contacted a barrier. He suffered a fracture to the left leg.,1
"An employee was walking in the hallway when the tread on her shoes caught on the floor causing her to trip and fall. Her face, right eye, and teeth struck the floor. She sustained a right orbital fracture and was hospitalized.",1
An employee had been repairing the winch truck. A pipe on the winch truck fell and hit the employee's head causing an injury that required 15 staples.,1
"An employee was unloading a tractor trailer. The load became unstable while the chains were being removed; the employee fell off and was struck by a pipe rack, suffering injuries to both legs.",1
"On April 4, 2019, an employee was unloading pipe from a van to a loading dock. The employee suffered a hernia and was hospitalized.",1
"An employee was climbing a 16-20 foot extension ladder to secure it. While stepping onto the roof to tie off the ladder, the ladder slipped and the employee fell. The employee landed on paver stones on a walkway and was hospitalized with a broken arm and leg.",1
"An employee was working to dislodge a log from a hydraulic log flipper. When the log dislodged, the log flipper's leg came down and amputated the employee's right big toe.",1
An employee was moving a 300-pound piece of sheet metal from its stored position to the shear to cut it to size. The sheet metal fell onto the employee's steel-toe boots. The employee's right foot was punctured by a corner of the metal and several bones in the foot were broken.,1
"An employee was attaching a trailer to a truck when the employee's left pinky finger was pinched in a trailer hitch, resulting in a slight amputation of the finger.",0
"An employee was grinding a flywheel on a lathe. As the machine was winding down, the employee's fingertips were trapped between the wheel and the grinder. The employee suffered amputations to the left little and ring fingers above the first knuckle.",0
An employee was lying on his back underneath a kitchen sink installing a laminate countertop and felt pain in the lower chest while pulling on the countertop.,1
"An employee was working on an automation assembly laser machine when parts moved unexpectedly. The employee's finger was caught in the machine as it advanced, and he suffered a broken bone and a partial fingertip amputation requiring surgery. The machine was not locked out at the time.",0
"An employee fell from a roof to the ground 12 feet below, suffering bruises to the heels, the left arm, and the wrist.",1
An employee was operating a press when a piece of steel snapped in half and caused a head injury requiring hospitalization.,1
An employee's foot was run over and crushed by a telehandler.,1
"An employee was doing setup on a slitter arbor. The table moved; the employee was caught by the chest between the table and the splitter arbor. The employee was then released and fell, striking his head and suffering head injuries.",1
"An employee was spraying the gears of a citrus machine. The gears caught a towel tucked into his pants, then pulled in his right index finger. The finger was crushed and was amputated up to the first knuckle.",0
"An employee was walking along a sidewalk at work when she tripped on an uneven section and fell to the sidewalk, fracturing her right arm and wrist.",1
"An employee was refueling an excavator from a fuel cell located in the back of a pickup truck. When the employee was rolling up the fuel hose and cable, the excavator rotated counter-clockwise and crushed the employee's lower back/torso between the excavator and the pickup truck.",1
"On April 4, 2019, an employee became ill while operating a wire drawing machine. The employee was hospitalized due to carbon monoxide exposure.",1
"An employee was clearing a jammed board from an edger machine. The employee's left hand was caught in the blades of the edger, suffering lacerations and an amputated index finger.",0
An employee suffered an avulsion to the middle fingertip while working on a metal stud machine.,1
"An employee was operating a polyurethane machine. When the employee was detaching the water line, the teeth of the polyurethane machine caused a laceration to the left wrist requiring hospitalization.",1
"An employee had been operating a golf cart and then exited it. He was in front of the golf cart when it rolled into him, running him over. He suffered back injuries.",1
"An employee was installing a new outdoor fire pit. When the pit was ignited, a fire blast knocked the employee back 5-10 feet into the shrubs. He went into shock and suffered minor burns to the hands.",1
"An employee was troubleshooting a calender machine when some of the cords became misaligned. The employee's hand was caught between the machine's rollers, causing lacerations, fractures and the amputation of the employee's ring and pinky fingers.",1
"An employee was cutting plywood with a circular saw when it became stuck and kicked back, making contact with his left hand. The top portion of his left hand below the fingers and above the wrist was lacerated, as well as his left pinky finger below the knuckle.",1
An employee was feeding a client when the client bit off the tip of the employee's right little finger.,0
"On April 5, 2019, at 2:00 p.m., an employee was walking to their car, tripped over a rolling computer bag and fell. The employee sustained fractures to the left foot, ankle, and lower leg.",1
"On April 5, 2019, an employee was feeding the edger machine when a board jammed. After clearing the jam, the employee proceeded to operate the machine when a board kicked back and struck the  employee in the abdomen. The injury required surgery.",1
"On April 5, 2019, at about 3:00 p.m., an employee was performing setup procedures on a press. While feeding webbing into the cylinder, the employee's right middle finger got caught in the cylinder resulting in an amputation to the finger.",1
An employee was clearing a piece of wood that was stuck in a jump saw when the blade activated and amputated his left thumb tip.,0
"An employee was straightening a barrel liner. The liner slipped off the supports, pinching the employee's left index finger between itself and the machine. The employee suffered a partial amputation.",0
"While mopping the stairwell, an employee lost her balance and fell at the bottom of the stairs, breaking her hip.",1
"An employee was servicing equipment when it started up. The employee's right index finger was caught between a fan pulley and a belt, causing an amputation to the upper part of the finger.",1
"An employee was loading aluminum ingots from a truck to a conveyor belt. An ingot fell and struck the employee on the left index finger, causing an amputation to the tip.",0
"An employee was using an angle grinder when he tripped on a sea wall grounding wire, causing the angle grinder to contact and lacerate his right knee as he fell to the ground. The angle grinder blade was unguarded at the time.",1
"An employee was doing maintenance on a semi trailer from a rolling ladder. The ladder broke, causing the employee to fall and strike the ground. The ladder landed on top of the employee. He suffered a broken left hand and two broken bones in his right foot.",1
"A temporary employee was lifting boxes of parts when the box fell on the employee's right foot, resulting in the amputation of the big toe and the second toe.",0
"A bus driver fell out of a bus, which rolled backwards and ran over the driver's leg.",1
"An employee was assaulted by an employee of another contractor, suffering a crushed esophagus, a shattered nose, and bruises to the face.",1
An employee was cutting angle components on a table saw. His hand contacted the backside of the saw blade; the nail and skin on his left index finger were amputated without bone loss. The table saw was guarded at the time.,0
An employee was trying to remove some bubble from a line. It wrapped around a roller and his hand was pulled in and stuck between two rollers. His left arm was injured.,1
"On April 5, 2019, an employee was loading a roll-off container when the chain slipped. It struck the employee in the face, causing a fracture; the employee was hospitalized.",1
"An employee was attempting to remove a stuck towel that was caught in a bin dumper machine when her finger was caught between the bin and bin dumper machine, cutting and lacerating her left index fingertip.",1
An employee was descending from a closet to the sales floor about 4 feet below. He suffered a hairline fracture of the left knee.,1
"An employee came into contact with hydrofluoric acid vapor while working on a line, suffering a second degree burn to the lower face and neck area.",1
Two employees were fighting when one of them threw hot grease on the other. The second employee suffered second- and third-degree burns and was hospitalized.,1
An employee was participating in a formation run with his class when he became exhausted. He was hospitalized.,1
An employee was moving a stack of drywall that was leaning against a wall when the drywall fell onto his right leg breaking his tibia and fibula.,1
"An employee was attempting to repair a cargo door when the door fell down and struck him, causing head, neck, and shoulder injuries. He was hospitalized.",1
"An employee was shutting down a centrifuge for cleaning when it broke off the points just above where it was bolted to the floor. A piece of it struck the employee's chest, causing a cut and injuries. The employee was hospitalized.",1
An employee fell while skiing and suffered a broken leg.,1
An employee was cutting meat with a meat saw. The saw amputated the tip of the employee's left middle finger.,0
"An office manager asked an office assistant to circle something on a patient's treatment plan. The assistant responded, then came up behind the office manager and put her arm around the office manager's neck and squeezed. The office manager felt a pop in her neck and was hospitalized with neck pain, and elevated blood pressure and blood sugar.",1
"An employee was repairing plumbing under the crawl space of a residential dwelling when a spider bit the employee's abdomen, causing an infection that required hospitalization.",1
An employee was opening a trailer door when freight that was against the door amputated his left middle fingertip.,0
"An employee was carrying a garden hose up a fixed ladder. A swing gate at the top of the ladder swung open, causing him to fall 8 to 10 feet to the ground below. He suffered a broken ankle.",1
"An employee fell from a dumpster rail to the ground, suffering a head laceration and fractures to the shoulders, breast plate, and spine. The employee was hospitalized.",1
"An employee was backing up in a forklift when his left arm was pinned between the side of the forklift and the steel racking behind him. The arm was crushed between the elbow and the shoulder, suffering a compound fracture.",1
"Four employees were moving stored chairs out of a golf cart barn. An employee was between parked carts when a charger connected to a cart fell and struck the employee in the head, causing a laceration. The employee was hospitalized.",1
"An employee was connecting two LD-3 containers on dollies. He was moving the rear dolly with his right hand on the dolly tongue and his left hand toward the front dolly's connection hitch when the rear dolly's ring impacted his left ring finger, fracturing it.",1
"An employee was on the fourth floor of a building under construction. The employee was discussing getting welding leads down from up above to ground level. When the employee looked down to see where the welding cables would go, the wooden safety railing failed and the employee fell approximately 25 feet. The employee fractured their right arm, sternum, and two vertebrae in their back.",1
"At approximately 8:10 p.m., a Wood employee was engaged in opening a filter pot. He was holding a box-end wrench while another employee assisted in pushing on the wrench. The nut gave way, pinning the injured employee's left ring finger between the wrench and the filter pot. The fingertip was amputated. The injured employee was wearing gloves at the time of incident.",0
An employee was transferring chemicals from a chemical tote into a tanker truck when the hose whipped out of the tote and struck the employee on the chin. The employee's jaw was broken.,1
"On April 6, 2019, at 11:30 a.m., an employee was attempting to close a drawer in the gun vault of a vehicle when the employee's abdomen bumped the drawer closed on the employee's left index finger, resulting in a fingertip amputation.",0
"An employee went to fill the day tank and was sprayed in the face with sodium hydroxide, requiring hospitalization.",1
An employee suffered a thumb amputation while performing maintenance on a grease pump.,0
An employee was helping to unload pallets when the pallets tilted and fell on the employee's legs. The employee suffered lower left leg fractures and a fractured right ankle.,1
"An employee tripped over a space heater cord, fell and broke her hip.",1
"An employee was cleaning up the processing floor with water and cleaning solution when he turned and lost his footing, falling to the ground. He was hospitalized with a left hip injury.",1
"An employee was restocking a wall display. As the employee dismounted the ladder, their foot got caught on the display causing the employee to fall to the floor and fracture a hip.",1
"An employee was performing roofing work when he fell from elevation and fractured his arm, requiring hospitalization.",1
"The cap blew off a camlock, striking and breaking an employee's right hand.",1
"An employee missed a step as she was walking down the stairs and fell, fracturing her right lower leg and ankle. She was hospitalized and had surgery.",1
"Employee was cleaning with a power washer when his foot became stuck in the mud. As he tried to pull it out, his boot came off, causing him to lose balance and activate the power washer. The power washer then amputated a toe.",1
An employee on a 6-foot ladder was pulling a tarp from a truck when he lost his balance and fell to the ground injuring his lower back.,0
An employee was administering shots to chickens with an avian vaccination needle containing Autogenous Orthoreovirus vaccine. The employee missed the chicken and stuck himself on the left hand resulting in an infection.,1
An employee was escorting a coworker operating an order picker when the coworker turned the picker around and struck the employee's right foot. The employee had surgery on two toes.,1
"An employee was working in a 15-foot-deep foundation when a boulder from the perimeter rolled down and fell on the employee's lower right leg, causing muscle injury.",1
"An employee was lifting a 100-pound CMU block while on a scaffold. The board he was walking on flipped over and he fell about 5 feet to the ground, suffering a broken left leg and ankle.",1
"An employee was in a trench for a sewer line. Part of the trench wall collapsed, knocking the employee to his knees and burying him. He suffered bruises and was hospitalized.",1
"An employee was climbing a ladder into an attic while carrying HVAC supplies. The ladder slipped and the employee fell approximately 9 feet to the ground below. A jug of freon then landed on his head. He suffered a bruise on the left arm, pain/soreness in the hip and back, and a head injury.",1
"An employee was moving a supply cart when she fell to the concrete floor, suffering a wrist fracture that required surgery to install a plate.",1
"An employee was using a wrapping machine to wrap a roll of roofing material when the employee's hand was caught between the machine's guard and wrapping arm, resulting in a right little fingertip amputation.",0
An employee was operating a baggage tug and struck a baggage chute. The employee suffered a laceration to the liver and was hospitalized.,1
"An employee was working from a baker scaffold, removing ceiling tiles. He fell 4 feet to the ground, breaking his shoulder.",1
An employee was working on a blower line air vent when the blades of the vent amputated his right hand.,0
"An employee was getting some roofing material from the top of a pallet. As he stepped down, he twisted and broke his ankle, requiring hospitalization.",1
"On April 8, 2019, an employee tripped and fell on a carpeted floor, breaking her left hip. She was hospitalized.",1
"An employee was cutting meat with a meat saw. The saw amputated the tip of the employee's left thumb, removing soft tissue and bone. The saw was not guarded at the time of the incident.",1
"An employee was cleaning the rollers on a conveyor when the employee's arm was pulled into the rollers, breaking the left arm.",1
"An employee was turning the corner with an electric pallet jack when the employee's leg was caught between warehouse racking and the jack, breaking the employee's tibia.",1
"An employee was tightening a clamp (using channel lock pliers) on a pasteurizer system when a leak was identified. The clamp fastener dislodged while turning and 240-degree liquid discharged onto the employee, causing burns to the waist, abdomen, legs, and knees.",1
"An employee was operating a forklift when the employee stepped off the lift to reach for a roll of shrink wrap and fell, landing on the roll of shrink wrap. The employee suffered contusions to the ribs and chest area.",1
"An employee was performing maintenance on an aircraft when he fell 2 feet from a stepstool to the floor, hitting his head and requiring hospitalization.",1
"An employee was using a railcar mover to move a damaged rail car to be unloaded. The rail car did not have functioning brakes at the time. As the employee backed the rail car down the track, it started to go down an incline. The employee lost control and the rail car and railcar mover flipped on its side. He was dislodged from his seat and his knee struck an object inside the railcar mover.",1
An employee sustained soft tissue damage to the upper left leg when he was caught underneath a trailer tire.,1
"An employee was offloading a 55-gallon steel trash can drum into a larger 30-yard roll-off trash container. He was rolling the drum inside the container, on its edge, when it shifted quickly and pinched his right thumb against the container, causing a deep laceration. He was hospitalized for surgery to repair a tendon and nerve in the tip of his thumb.",1
"An employee was standing near the top of a step ladder, trying to clear a jam on an overhead transport belt, when the ladder legs kicked out. The employee fell to the floor, breaking two ribs on her right side.",1
"An employee was freeing stuck baggage at an airport baggage carousel. The carousel caught the employee's index finger, causing an amputation to the end of the finger.",0
"A skid steer machine's bucket was knocked loose from the machine and fell on an employee's foot, breaking it. The employee was hospitalized.",1
"An employee was in a basket attached to a forklift working on light fixtures. The basket fell off the forks and the employee fell to the ground, suffering fractures.",1
"An employee had reached down to pick up debris from a milling operation. A dump truck rolled over his right hand as it backed up, causing compound fractures of two fingers.",1
"An employee was helping unload pallets of metal parts at a client's site. His foot was pinned between a truck and a metal strap, lacerating his foot and fracturing his little toe.",1
"An employee was tightening the bolts of a saw blade on a tube cutoff machine. The blade was turned, and the employee's wrench followed its movement. His left little finger was crushed between the wrench extension and the framework of the machine. The tip was amputated.",0
An employee was working in a hoist way. The employee's hand was severely injured.,1
"A partially assembled stair landing/post assembly was being hoisted when it shifted and the top of the landing rolled over. It hit an employee in the small of the back, on the left side, and knocked him down. He suffered a hematoma and was hospitalized.",1
"An employee was exiting a vehicle to fuel up when his finger was caught in the pinch point between the driver's side door and a metal post, resulting in an amputation to his right ring fingertip.",0
An employee was standing on the opposite side of the metal brake press machine when it tipped over and fell on the employee. The employee suffered right lower leg bruises.,1
"A plumber was repairing a customer's cast iron stack pipe. As he lifted it to install the band connector, it slid down and amputated the tip of his right index finger.",0
"An employee was walking out of a pantry area when she tripped and fell, sustaining a fractured hip and right shoulder.",1
An employee was hooking up tandem trailers with a dolly when the rear trailer shifted and pinned the employee against the dolly. The employee suffered bruising on the left leg and a broken left thumb.,1
"An employee was unloading feed from a tractor trailer when a blockage occurred.  He was attempting to clear the blockage when his left hand made contact with the auger, causing deep lacerations to his fingers.",1
"An employee's motorized wheelchair rolled out from under him and he fell to the sidewalk, suffering a broken femur.",1
"On April 8, 2019, at 12:26 p.m., an employee was using a manual rolling light duty tilt truck to dump collected garbage into a dumpster at the dock. The employee tilted the truck and its contents backward, and while doing so, his hand was caught between the metal handle of the tilt truck and the edge of the dumpster, amputating his right pinky fingertip.",0
An employee was lifting an automated wire stripper and suffered a right rotator cuff injury.,1
"An employee tripped over a rug and fell to the floor, suffering a broken right hip.",1
"An employee was loading material between rollers on a press machine. The machine engaged and caused the material to shift, catching his right middle finger. The fingernail and nailbed were amputated.",0
An employee was closing the door on a gate. Her right little finger was caught in the door latch and the tip was amputated.,0
"An employee was stepping down a stepladder when she fell from the third step to the floor. Her right leg was broken below the knee, and she was hospitalized.",1
"An employee was standing on the top of a restaurant hood. He fell off the hood to the floor below, suffering a right tibia/fibula fracture.",1
"An employee was cleaning out a frac tank when a tube came into contact with the opening on top of the tank. The employee's right index finger was crushed, and the tip was medically amputated.",0
"An employee was working on a generator with a grinder, cutting off the end of the exhaust pipe, when the grinder flew back and hit the right side of his face. He sustained a cut.",1
An employee slipped and fell on the stairs.,1
"An employee was adjusting a capper. The drive chain and sprocket caught and injured the employee's right hand, causing the amputation of three fingers.",0
"An employee tripped on a skid of product while walking in a warehouse. The employee fell to the ground, suffering a broken hip.",1
"An employee was engaged in changeover activities on the press stacker when the stacker table activated and pinned him, injuring his head and right arm.",1
"An employee was fixing a coffee machine when a blade cut his finger. He lost consciousness and fell, hitting his head and suffering a concussion and a ruptured blood vessel.",1
"A tailgate fell, striking an employee in the head. The employee was hospitalized.",1
"A wooden pole loosened as it was being pulled down and smashed an employee's left hand. One of the employee's fingertips was amputated, and another had the skin and flesh stripped to the bone.",0
An employee was cleaning an upstairs storage area. A motor was being tossed to a lower level when an attached hose clamp snagged his clothing and caused him to fall 10 feet. He suffered a broken leg.,1
"An employee was using a horizontal band saw to dismantle wood pallets when the employee made contact with the band saw blade, suffering a thumb laceration. The saw was guarded at the time.",1
"An employee was standing on a wooden railing 1-2 feet high, hanging a clock. He fell forward to the ground and broke his hip. He was hospitalized.",1
"An employee was locking and unlocking container cones aboard a container ship utilizing a lashing rod. The employee slipped and fell due to wet conditions on the deck, landing on a lower deck about 4-6 feet below and suffering a head injury. The employee was hospitalized.",1
"An employee was fixing a wire breaker from a spool roller machine. The machine engaged, amputating both of his middle fingertips.",0
"On April 9, 2019, an employee was cutting a piece of 6"" pipe with a demo saw.  The saw kicked back and cut the employee's face.",1
"An employee was working on a baler when it caught his hand. He suffered two broken fingers and lacerations, and was hospitalized.",1
An employee was in a work zone flagging traffic. An automobile entered the work zone and struck the employee. The employee was hospitalized with a head injury and a broken leg.,1
"On April 9, 2019, an employee had just gotten off his fork truck when it rolled back onto him, pinning him to the floor and fracturing his pelvis. The emergency brake was not set at the time of the incident.",1
"An employee was lacing up on a roofing shingle maker. The machine caught the employee's hand, peeling off the skin from his left index finger to his left little finger.",1
"An employee was standing up from her seat when she tripped over an ottoman and impacted the floor, fracturing her hip.",1
"An employee was framing a residential home when he fell approximately 4 feet off a step ladder to the ground, breaking his left leg and requiring surgery.",1
"A truck driver was on a truck flatbed, securing a tarp. He fell 4 feet to the concrete floor and suffered a compound fracture to his left ankle. He was hospitalized.",1
"An employee was riding on the passenger-side riding step at the rear of a garbage truck. The employee fell off the truck to the pavement, suffering fractures to a heel, an ankle, a wrist, and two ribs.",1
"An employee was handling and cutting a 44 lb. aluminum cast on a vertical saw work station. The cast became snagged on the saw as the employee attempted to cut the cast. The employee attempted to pull the cast loose from the saw and the saw blade forced the cast downward. The cast fell on the employee's right fifth finger/little finger, crushing it and resulting in a medical amputation of the fifth digit fingertip.",0
"An employee was abrasive blasting a metal platform with aluminum oxide. The abrasive medium struck the employee above the left knee, causing a severe laceration. The employee was hospitalized.",1
An employee was rolling up warning line on a roof when he fell through a skylight to the floor. His lower back was injured and he was hospitalized.,1
"An employee was chopping vegetables with a handheld knife. The knife cut a portion of the employee's thumb, causing an amputation to the fingernail and thumb area.",0
An employee was operating a standup forklift to move stock. His left leg struck a pallet jack that was not being used at the time and pinned between it and the forklift. The employee was hospitalized for a leg fracture.,1
An employee was operating a forklift when it pinned her leg against a concrete end cap.,1
"While performing infill insulation repairs, a roofer fell 20 feet through a repaired roof opening.",1
"On 4/10/2019, a home health aid tripped and fell on an uneven sidewalk while leaving a patient's home and sustained a dislocated/fractured shoulder requiring surgery.",1
"An employee was using an electric belt sander to sand plywood. The employee's left index finger was caught between the sander's belt and the rollers, and the fingertip (to the rear of the nailbed) was amputated.",0
An employee fell through a skylight while conducting roof repair. He was hospitalized.,1
"An employee tripped on a broken section of concrete and fell to the floor, breaking her pelvis.",1
"An employee was removing a metal roof at a stable. The employee fell through an opening left by a removed roof panel, landing in a horse stall about 15 feet below. The employee suffered injuries to the back and pelvis and was hospitalized.",1
"An employee was dragging a piece of plywood to the dumpster. The wind caught the wood and knocked him to the ground. He landed on his hip, breaking it.",1
"A dock plate got stuck while being deployed into a trailer. While an employee was getting it loose, it caught on his glove and slammed down onto his right index finger, causing an amputation.",0
"An employee was carrying a piece of plywood across a parking lot when the wind caught it, causing him to fall on the pavement. He suffered a broken left hip.",1
"An employee was under a vehicle, troubleshooting a component. The engine started, and the compressor/alternator belt caused the amputation of one of the employee's fingers and the partial amputation of another.",1
"An employee was on a ladder, using a pressurized hose to wash a refrigeration unit on a semi trailer. The ladder slipped and he fell to the ground, suffering a concussion.",1
"An employee was operating a planer feed table. As he was clearing a jam, his left hand was caught between the speed-up roll and a piece of timber. He suffered amputations to the left ring and middle fingers to the first and second joints. The machine was not locked out at the time of the incident.",1
"A temporary employee was placing a wheel assembly onto a bead seating machine. When the machine cycled, the cylinder bolts failed allowing the piston, bell housing and wheel assembly to swing out toward the employee's head. The tire struck the employee's face and knocked him backward onto the concrete floor. The employee suffered a loss of consciousness and a laceration to the mouth and the back of the head.",1
"At about 8:10 p.m. on April 10, 2019, an employee was backing a shuttle bus into a parking space. She fell from the bus and it ran over both of her legs, causing severe injuries.",1
"An employee was painting from a baker scaffold. He fell from the scaffold to the floor 1.5 feet below, suffering a tibia/fibula fracture and a fractured ankle.",1
"An employee was defrosting a vessel with a flexible steam line.  He set the steam line in the vessel and it slipped out, allowing steam to burn his neck, chest, and stomach.",1
"An employee was installing Tyvek on a 7:12 pitch roof and fell about 12 feet to the ground, suffering fractures to both wrists and a broken vertebra. Fall protection was not being worn at the time.",1
An employee slipped and fell on a wet floor. The employee suffered bleeding in the brain.,1
"An employee was raising a pallet jack when the pedal kicked back, striking the employee on the shin causing a cut and severe swelling.",1
A valve amputated an employee's fingertip.,0
"An employee was operating a rough terrain forklift. The forklift rolled 270 degrees on an embankment and the roll cage struck the employee, breaking the employee's ribs and scapula.",1
An employee was working near a drive shaft on a naval vessel. He ducked under the propulsion shaft and his hard hat struck the shaft causing a broken vertebra in his neck. He was hospitalized.,1
"An employee had just finished maintenance work on an HVAC system. He was closing the guard cover when it slipped, smashed his left hand (bruising two fingers), and severed the tip of the ring finger.",0
"An employee fell 7-8 feet from a fence, breaking his left ankle.",1
"An employee was stacking material that was coming off a press. The stack fell over and the employee fell backwards, cutting the back of his head on the ground.",1
An employee was diagnosing a water leak on an ice machine when the tip of his left index finger was cut off in a small hole on the machine.,0
"An employee was closing a valve hatch cover on top of a tank railcar. The cover closed on the tip of his right index finger, lacerating the skin. The employee was hospitalized.",1
"On Wednesday, April 10, 2019, at approximately 11:00 AM, an employee was using a step ladder while fixing a piece of exterior siding on a modular home. The employee was at a height of approximately 4 to 6 feet when the ladder tipped and he fell to the ground on his left side. He was hospitalized with a fractured left pelvis.",1
"An employee was unhooking chains that held a de-limber in place on a transport vehicle. The de-limber moved and pinched his right ring finger against a chain, causing an amputation at the first joint.",0
"An employee was holding the tag line for a debris bucket that was being lowered to the ground. The bucket caught the edge of a floor and tipped, spilling part of its contents onto the employee. He suffered fractured neck vertebrae and was hospitalized.",1
A temporary Jacobs Engineering employee's leg was caught in the deck of a mower. His leg was broken.,1
"Two employees were installing a cross-beam on a racking system from 6-foot-tall step ladders. One of the employees fell and their head struck the concrete floor, sustaining an open head injury. The employee was hospitalized.",1
An employee was carrying a board from his work area to the green chain. He was putting the board on the chain and caught his left middle finger between the board and the chain resulting in an amputation.,0
An employee was cleaning parts of a metal fabrication machine. His left little finger was caught between moving rollers and amputated.,0
"Two forklifts were being driven, one behind the other, when the first forklift stopped. The second forklift's fork went through the first forklift's cab, injuring an employee's left foot.",1
"An employee was climbing down from a street sweeper when he fell about 3 feet to the ground, breaking his right leg.",1
An employee was cutting steel at a burning table. His clothes caught fire and he suffered burns to the chest and face.,1
An employee fell while walking down stairs. She suffered a broken left tibia and a dislocated left ankle.,1
"An employee was climbing down an extension ladder set up on a telephone pole. He fell about 20 feet to the ground, suffering broken ribs and a broken shoulder.",1
"A pallet jack went into motion without an operator, crushing an employee's lower leg against a piece of angle iron. The employee suffered an ankle fracture. The pallet jack was tagged out at the time.",1
"An employee fell from a ladder while climbing down, landing on the ground 6-7 feet below. He suffered a broken right ankle and a fractured left humerus.",1
An employee was connecting a propane tank to a sweeper/scrubber machine. The tank began to leak and the employee's right hand was frostbitten by the gas. The employee was hospitalized.,1
"An employee tripped over a mat on the way into the building, suffering a broken right arm. She was hospitalized and underwent surgery.",1
An employee was preparing to install an electrical conduit on a switch gearbox when he fell about 7 1/2 feet to the floor. He suffered nine broken ribs on the left side of his body.,1
"An employee was unbundling bales of recyclable material. When he cut the wire with his wire cutters, it snapped back and poked his left eye. He underwent surgery to relieve pressure behind his eye.",1
"An employee was working on a ladder inside a car wash. The car wash activated, causing the employee to fall off the ladder and suffer a wrist injury.",1
"An employee tripped and fell to the ground, breaking her neck.",1
"An employee was fixing low-voltage wires in a store's garden center when he fell 25 feet to the ground, suffering a broken back and brain hemorrhaging.",1
An employee was retrieving a piece of plastic from a plastic cutter machine when the blade amputated his left ring and middle fingertips. The machine was guarded at the time.,0
"An employee was stocking in a frozen food department when she was thrown off balance by an L-cart of freight and the tape around it. She stumbled and twisted her right ankle. The ankle was dislocated and fractured, requiring surgery.",1
"An employee was crossing the street when a passing car struck him, breaking his femur. He was hospitalized.",1
An employee was using a hammer to loosen a piece of cement from the paddle inside a mixer. The paddle amputated three fingers and part of his right hand.,1
"Employees were drilling a water line/pipe when a sling, used to stabilize the pipe, caught an employee's arm and shoulders. His hands and arms were broken.",1
"An employee was at the top of a ladder changing light bulbs and fell onto a music stand, which impaled the employee and punctured a lung.",1
"An employee was walking in a parking lot when he slipped on ice and fell to the ground. He suffered a concussion and a fracture to the upper jaw, and was hospitalized.",1
"A subcontractor employee was working on a residential trash collection route. As he crossed the street to get to a customer's residence, a passing vehicle struck him. He suffered head fractures and trauma.",1
"An employee was about 6 feet up an 8-foot ladder, fishing wire down a wall. He fell from the ladder to the carpeted floor, breaking his right leg.",1
"An employee was getting ready to open the department store when a gust of wind hit the front double doors, causing them to strike the employee's head. The employee suffered a concussion.",1
"A tree was cut down and fell on an employee, causing a back injury.",1
An employee was performing putty work and final painting work when he reached for a water bottle. After drinking from the water bottle he began to vomit. The employee had ingested paint thinner and was hospitalized.,1
An employee was working at a threader. Shavings had balled up; the employee was removing them with a tool when the shavings were caught and pulled his hand into the machine's disc guard. He suffered a displaced fracture with partial amputation of the right little fingertip.,0
"A temporary employee was helping a forklift driver lift the base off a mold on the ground. The employee's finger was pinched between the lifting loop and the base, causing a fingertip amputation.",1
"An employee was bending sheet metal roof cleats on a folding machine. The ram came down on his hand, amputating the three middle fingers at the knuckle and crushing the little finger. He was hospitalized.",1
A tree rolled onto an employee's legs. The employee was hospitalized.,1
"A truck driver fell off the flatbed of his truck to the ground, suffering a broken hip that required surgery.",1
"An employee was standing on a disassembled section of scaffolding frame, which was lying flat on the ground connected to a second frame. The second frame was hit with a hammer to dislodge it from the first, and the employee lost his balance and fell backwards. His right jaw and head area struck an I-beam and his jaw was fractured.",1
"An employee was working on a rail car ladder, 8-10 feet off the ground, putting a tarp on the rail car. A strong gust of wind blew the tarp, causing the employee to lose his footing. He fell from the ladder to the ground, breaking his right leg and right elbow.",1
A security officer working for Paragon was escorting a customer out of an office when the customer physically attacked him. He was hospitalized.,1
"An employee was guiding a crane as it moved pieces of steel. The employee's right thumb was smashed between two of the pieces, suffering an amputation.",1
A wood chipper caused a partial amputation (to the second joint) of an employee's right index finger.,0
An employee was cleaning the ram on a plastic extruder machine when the employee's hand and arm were caught in the machine causing a fractured right radius.,1
"On April 12, 2019, an employee was removing a jammed bottle from a bottle takeout device machine on a line. A cylinder closed on the employee's right little finger, causing the amputation of the fingertip.",0
"An employee was using a core drilling machine to take samples from larger concrete samples. The drill bit became stuck in the concrete, causing the drill base to swing around and strike the employee's leg, breaking it.",1
"An employee was cleaning out concrete at the bottom of a concrete pump hopper. The pump turned over and caught his fingers, causing partial amputations to two of them. He was hospitalized.",1
"At about 2:15. p.m. on April 12, 2019, a postmaster was on a back dock as empty all-purpose postal containers were being loaded onto a scissor lift to load onto a truck. As the lift was being raised to the level of the truck, one of the containers rolled off and struck the employee in the back, pinning her against the brick wall. She suffered a 2-inch laceration on the top of her head (requiring five staples), a fractured vertebra in her neck, and a concussion.",1
"An employee bent down near a conveyor to inspect a jammed tire shredder. The conveyor caught the tail of his jacket, pulling him into the machine and causing broken ribs and lacerations to his right arm. He was hospitalized.",1
An employee was refueling a gas pump when it caught fire. The employee's legs and arms were burned.,1
An employee was re-banding a unit of lumber on outfeed chains. The lumber advanced and trapped the employee's right middle finger against the end stop. The fingertip was amputated.,1
"An employee's left index finger was caught between a parts rack and a jib crane hook, resulting in a partial amputation.",1
"While using pliers to lift a urethane anvil cover, an employee suffered a slipped disc.",1
"An employee was walking on a second-floor joist when he fell, breaking his right hip.",1
"An employee slipped on a floor and fell, suffering a broken left hip.",1
"An employee was moving a gun safe with a manual pallet jack. The safe slipped, crushing his right toe.",1
An employee was cutting onions when the knife amputated a portion of his right thumb.,0
"An employee was on a third floor balcony of an apartment building that was being built. He fell over a guardrail to the ground below, suffering broken vertebrae and a thumb injury. He was hospitalized.",1
An employee was cleaning a linear saw using compressed air. The saw activated and the employee suffered lacerations to the right hand.,1
"An employee was loading brush into the bucket of a backhoe. His left ring finger was caught between the bucket and a limb of the brush, resulting in a partial amputation.",0
"An employee was examining an unresponsive cat when it suddenly awoke and became aggressive, biting the employee's right hand near the little finger.",1
"An aide was working in a client's home when her foot was caught in a bedframe wheel, causing the employee to fall to the floor and break her hip.",1
"An employee was unloading material from a trailer. When the employee cut the load strap, some pipe rolled off the trailer and onto the employee's legs, breaking the right tibia and dislocating the left knee.",1
"An employee was removing casing. The casing swung from the rig and struck the employee's right index finger against the rig tongs, smashing the fingertip. The employee was hospitalized.",1
"An employee was cleaning a tablet compression machine when it started, catching the employee's fingers and causing an amputation to a finger.",0
A roofer was carrying a box of nails when he fell off of the roof of a one-story house and landed on the ground. He sustained a broken left arm and left pelvis and was hospitalized. A safety lanyard was not connected at the time of the incident.,1
"An employee was replacing the carbon set on a furnace. His fingers were caught in the carbon/head intersection of the furnace, causing the partial amputation of his right ring finger and an injury to the right middle finger.",0
"Several employees were riding in a flatbed truck. The truck had to swerve to avoid a barrel in the road and an employee fell out onto the street. The employee suffered a laceration to the right ear, a broken bone in the right ear area, and lost consciousness. The employee was hospitalized.",1
"A maintenance employee was removing a device from an ice cream freezer when ammonia came out and hit the employee, causing burns.",1
"An employee fell through a ceiling into the room below, landing on the floor and suffering a punctured left lung, rib fractures, and a broken clavicle.",1
"An employee was inspecting a cabinet when a wind gust shut the door on the employee's finger, causing an amputation.",1
"An employee was throwing a pallet into a dumpster. The pallet shifted and landed on his right ring finger, resulting in a partial amputation.",1
An employee was cleaning shavings from a drill press. The press caused a partial amputation to the employee's hand.,0
"An employee was replacing insulated roof panels when his right foot slipped causing him to fall forward into an open space  He fell approximately 10 feet from the roof to the floor of the building striking a wall section and the edge of the stone fire place. The employee sustained contusions and strains to the back and neck and left side of his body. The employee was wearing a harness, but it was not tied off to an anchor point.",1
A maintenance tech was cleaning a piping system (piping from granulator D) and amputated his left thumb. The machine was not locked out/tagged out at the time.,0
An emergency room nurse was treating a patient when she was exposed to fish and suffered a serious allergic reaction. She was hospitalized.,1
"An employee was setting up a muffin depositor machine when the machine activated, causing partial amputations to two of the employee's fingers.",1
"An employee was testing new padlocks on a water tank lid. The lid closed on the employee's right thumb, lacerating it at the nail bed.",1
"On April 13, 2019, an employee's torso and right arm were burned when a pH probe came out of a fermentation vessel fitting and steam was released through the open port.",1
"On April 13, 2019, an employee was delivering mail when the employee slipped off a curb and fell. The employee was hospitalized with a broken pelvis.",1
An employee was degutting a cattle carcass with a knife. The knife punctured the employee's left lung.,1
An employee was loading product into the back of a customer's vehicle when the vehicle struck the employee.,1
"An employee was clearing a jammed part from a chopper on a line. The chopper lacerated the employee's right middle finger, causing an amputation of the first quarter inch of the finger.",0
An employee was removing a broken board from a green chain when his hand was caught in a pinch point. He suffered a fingertip amputation.,0
"An employee was pushing an air handler on a conveyor system when he suffered a hernia. He was hospitalized, requiring surgery.",1
"On February 7, 2019, an employee was standing on a dock plate when a truck pulled forward from the dock. He fell 4 feet to the floor, suffering a compound fracture to the lower right leg. He was hospitalized.",0
An employee was feeding lumber into a planer. A flying object struck the employee below the left ear.,1
An employee was stung by a bee while collecting mail from a mailbox. She suffered an allergic reaction and was hospitalized.,1
"On April 13, 2019, an employee was descending a 16-foot fixed ladder after replacing filters on an extraction system. The employee fell from the ladder to the floor 6 feet below, breaking his right arm in two places. A safety harness was not being worn at the time.",1
"While receiving shopping baskets in a parking lot, an employee tripped and fell over a concrete parking stop. The employee suffered broken ribs and a punctured lung and was hospitalized.",1
"On April 14, 2019, an employee was trying to clear fluff from the cone in an extruder. A rotating screw caught the employee's left index finger, amputating the tip.",0
"While blocking product in a supermarket aisle, a grocery clerk slipped and fell, suffering a broken left hip. The clerk was hospitalized.",1
An employee slipped and fell while walking near a water cooling tank that had just overflowed. The employee suffered a broken left femur.,1
"An employee fell from an aircraft loader, injuring his right knee.",1
"An employee was moving a lawn mower deck on a forklift. While the employee was adjusting the deck, his left ring finger was pinched and cut. Part of the fingertip was amputated.",0
"After test leads were attached to an energized cable, a flash burned an employee's face and hands. The employee was hospitalized.",1
"An employee was stepping up onto a platform. The employee's foot caught on a step and their right shin contacted the step as they fell, causing a broken tibia and fibula.",1
An employee was kneeling down next to an empty IBC tote when a forklift approached to lift the tote. The tote struck and injured the employee; he was hospitalized for a fractured left tibia.,1
An employee was driving a forklift and was pinned between the forklift's backrest and a rack. The employee suffered multiple back fractures.,1
"While working at a cooling tower, an employee was adjusting/leveling a motor and fan. The fan was turned on, which activated the belt and pulley. The employee's left hand contacted the fan's belt and pulley, resulting in a partial amputation (first joint) of the fifth digit.",0
"Employee was on a 6-foot stepladder hanging cables. The employee fell off the ladder, striking his head on the floor 4-5 feet below. The employee suffered a skull fracture and soft tissue trauma.",1
"An employee was cleaning and lubricating the drive chain on a pipe coating machine. The rag he was using to remove excess oil was caught in the machine, which resulted in his hand being pulled in. He suffered a partial amputation of the left index finger.",0
"An employee was using a circular handsaw to cut a wooden board at ground level. The blade ricocheted and cut the toes on the employee's right foot, causing an amputation. The safety guard was not in place at the time.",1
An employee was on an extension ladder when it slid out from under him. The casing of a pump motor lacerated his scalp.,1
"An employee was on an A-frame ladder, trying to unjam a garage door, when he slipped and fell backwards, landing about 4 feet below on his back. He suffered a broken pelvis.",1
"An employee was conducting well-servicing operations. He was attempting to guide a rotating rod away from a winch line when the spinning rod, which was covered in paraffin, caught his gloved left hand, amputating the pinky finger near the knuckle.",0
"An employee was vacuuming catalyst inside a confined space. A piece of the catalyst rolled down from the pile and struck his leg, breaking the femur. He was hospitalized.",1
"An employee was grabbing material out of a shipping container when the wind blew the door closed on the employee's arm, causing a closed fracture to the right forearm.",1
An employee fell down two steps in a theater. She hit her head and suffered two broken fingers and a strained back.,1
An employee was conducting abrasive blasting inside a tank in a submarine. Blast media from the nozzle struck his chest and was embedded in the skin. He was hospitalized.,1
"An employee of Apache Scaffold was disassembling a scaffold when he fell 20-40 feet inside a confined space boiler, suffering multiple injuries.",1
An employee was backing a forklift up to a rack and his leg became lodged between the forklift and the rack. He suffered damaged muscle tissues on the left leg.,1
"An employee was holding up 18 27-by-83-inch pieces of glass while another employee was pulling a sheet of glass from the middle of the stack. The employee fell backwards between two pallets of wood doors. The force of the fall shattered half the glass. The employee suffered two broken tibias, a broken left ring finger, and a laceration on the right thigh.",1
"On April 15, 2019, an employee was cleaning tables in the warehouse area with acetone. The employee heated up the acetone and the solvent ignited, burning him below the knee, on both legs, and the right hand.",1
"An employee was trying to free a dock plate when his right hand was caught between the surface and the dock plate. The top of the hand was lacerated and the little, ring, and middle fingers were broken.",1
An employee was cutting metal with scissors. The metal cut his right hand and he was hospitalized.,1
"An employee was operating a beading machine. The machine caught his left glove, causing the amputation of his middle fingertip.",1
An employee was enroute to show a property to a client when she tripped and fell on an uneven public sidewalk and fractured the left elbow.,1
"A loss prevention employee was bringing a shoplifter back to the office when the shoplifter ran toward the exit door. The employee slipped on the shoplifter's jacket (which had fallen to the ground) and fell, breaking his hip.",1
"A temporary employee was taking wood off a saw and placing it on a cart. His hand was caught by a roller mechanism; the rollers and a chain caused the partial amputation of his middle, ring, and little fingers.",0
"A forklift struck an employee in a warehouse, injuring his left ankle and foot.",1
"An employee was taping a wall for painting when plastic became tangled in his stilts. He fell, suffering two broken elbows.",1
An employee had been cleaning a boat when he was found unresponsive and was not breathing. He sustained a bump on his head above his eye.,1
"At about 2:30 p.m., an employee was documenting a trailer load when a forklift was backing up and struck her, causing fractures. She was hospitalized.",1
An employee was moving totes full of magazines out of his truck. The tool he was using got stuck and flung him forward; his knee struck the floor and was injured.,1
The injured employee and a co-worker had just finished packing up items in a house and were transferring them to a new location when the injured employee felt chest pains as he was driving the moving truck. The employee had a stroke.,1
"While vacuuming a floor, an employee got tangled in the cord and fell sustaining a broken hip.",1
"An employee was hanging lights from a ladder when the employee fell from the ladder to the ground, breaking the left foot.",1
"An employee was climbing a fiberglass extension ladder when it gave way. He fell to the ground, breaking his right kneecap.",1
"An employee was working on a pad-mounted transformer when an arc flash caused second-degree burns to the employee's ear, face, neck, and shoulder area.",1
An employee was lining up a door into a jam to staple it together with a pneumatic staple gun when the gun stapled his stomach with a 2-1/4 inch staple.,1
"On April 17, 2019, an employee was helping to fix an issue with the pipe system. The employee removed a hose from the boiler truck used in the pipe lining process and hot water sprayed out, burning the employee's legs. The employee was hospitalized.",1
"Three employees were working on a welding positioner. One of them was installing a belt when it caught their finger, injuring the finger and necessitating a partial amputation during surgery. The machine was not guarded at the time.",0
An employee was placing a bag over a motor to start clean-up procedures on a mixer when his right hand was caught between a belt and pulley. The middle and right ring fingers were severed to the second knuckle. The index and small fingers were also damaged. The mixer was still running at the time of the incident.,0
"On April 14, 2019, an employee was cutting the ends off frozen pork loins using a bandsaw. The blade amputated the tip of his left thumb.",0
"An employee's right hand and four fingers were caught between a tracking roller and conveyor belt, causing abrasions and burns to the knuckles and the back of the right hand.",1
"An employee was cleaning a paint gun with xylene. He had removed the gun's spray tip when pressurized xylene sprayed out, lacerating and injecting his hand. He was hospitalized with hand swelling and a potential infection.",1
"An employee was closing a vehicle gate when her hand was caught in the gate, smashing three fingers on her left hand and amputating her left middle fingertip.",0
"On April 16, 2019, an employee was cutting product on a bandsaw. The saw caught the employee's left middle finger, amputating the tip.",0
"An employee was setting stairs onto a rig platform when the stairs became disconnected from the rig platform, causing the employee to fall 6 feet from the platform and be struck by the stairs. The employee was hospitalized with four fractured ribs.",1
"While working in the kitchen area, an employee bent over to pick up a phone and fell on the wet floor.",1
An employee suffered a fingertip amputation.,1
"An employee was helping a driver slide the tandems on a containerized chassis when the employee's hand was smashed on the containerized chassis, cracking the wrist bone and a bone in the hand. The employee required surgery.",1
"An employee was attempting to land a pallet jack on an outrigger landing platform (Level 12). The employee was signaling the crane and controlling the load at the same time. His hand was in the open slot at the end of the forks where the wheel retracts into the fork. The wheels were not powered down, but extended because of gravity. As the load was brought down, the wheels retracted into the opening, pinching the employee's fingers. The index and middle fingers were severed at the first knuckle.",1
"An employee was manually adjusting the tongue on a loader in order to place it for towing to a new logging location.  The employee's finger was caught somewhere near the tongue, resulting in a fingertip amputation.",0
An employee slipped on ice while getting out of her car and suffered a broken right femur.,1
"An employee jumped down from his semi-truck, lost balance, and fell to the ground, fracturing his hip.",1
An employee was shelving a shipment of pallets with a pallet jack that had been staged in the staging area. The employee was returning from the shelves to pick up another pallet when she was struck by a forklift at an intersection. She fractured her lower left leg.,1
"An employee was climbing up an 18-foot fixed ladder. He fell to the cement floor about 15 feet below, suffering a broken right heel.",1
"An employee was folding up a mat used for therapy when it caught her foot. She fell forward toward a cabinet, breaking her left arm at the shoulder.",1
"An employee had been trimming logs with a chain saw when he started to move to a new location. His left foot became caught under a log as he stepped over it, causing him to fall forward and fracture his left leg.",1
"An employee was welding when the welding hose blew out, causing third degree burns to his lower abdomen.",1
"An employee was removing wooden forms from 30-foot-tall poured concrete cylinders at a building site. The employee's right hand was caught between the wooden panels of two forms, and the employee's ring fingertip was amputated.",1
"An employee was handing masonry blocks to another employee on a scaffold when the employee walked backwards off the scaffold and fell approximately 5 feet onto a concrete floor. The employee suffered a broken right arm, requiring surgery, and a fractured right hip.",1
"An employee was climbing down from a scaffold. The locking key to the midrail came undone, and the employee lost his grip on the rail (which was wet) and fell. He landed on the ground about 12 feet below, suffering cracked ribs and bruised lungs.",1
An employee slipped and fell on the floor while walking.,1
"An employee was putting frozen packages into a box when his right little finger was caught on the spiral freezer belt, resulting in a finger amputation.",0
"An employee was helping his work crew perform maintenance on furnace slide valves. While the valve components and hardware were being disassembled, the employee's right middle finger was caught between the flange's slide plate and blind. The tip was amputated.",0
An HVAC service technician was responding to a service call at a customer's residential location. The employee was investigating a portion of the HVAC system in the backyard and fell from the elevated deck to the unpaved ground below. The employee suffered contusions and lacerations to the spleen and lower arms that required hospitalization.,1
"An employee was working on a press. After the machine cycled, he pushed down the short pieces with a tool. As he was doing this, the machine was activated via the pedal, causing the spring to come down on the tool and crush the employee's right third finger.",1
"On April 16, 2018, an employee was on a 12-foot ladder soldering a water pipe in the ceiling with a propane torch when the torch flashed, causing first degree burns to the employee's right shoulder and face. The employee fell from the ladder and sustained a concussion, fractured ribs, and fractured vertebrae. The employee was hospitalized.",1
"An employee was connecting pipe when his left middle finger was pinched between a fixed ladder and a swivel pipe component, resulting in a fingertip amputation.",1
An employee was manually adjusting the battery on a forklift in order to add water when the battery shifted unexpectedly due to the forklift's position on an uneven floor.  The employee's finger became caught between the top of the battery and the forklift structure.,1
"On April 16, 2019, an employee was using a staple gun to secure paper to a bundle of completed product to a line roller system. The bundle moved and the employee's finger was pinched between the product and a roller, resulting in a partial amputation of the right middle finger.",1
"On 4/16/2019, at approximately 12:00 p.m., an employee was mowing grass along the road when he attempted to remove a piece of wood that was lodged underneath the mower. The mower's moving pulley and belt lacerated his left hand, damaging the tendons and requiring hospitalization and surgery.",1
"An employee was struck by a cargo truck that was backing up at the outside dock. The employee was hospitalized with internal bleeding, a spleen injury, and broken vertebrae.",1
An employee was in her car during her break when an unknown assailant approached the car and stabbed the employee with an unknown weapon.,1
"An employee who was taking apart shelving slipped and fell off a beam. The employee fell approximately 4 feet to the concrete ground, suffering a fractured tibia and fibula.",1
"An employee was hospitalized for severe back spasms, heat stress, and dehydration after vacuuming up blast media on an aircraft carrier.",1
An employee was participating in training intervals on a treadmill and began displaying signs of fatigue. The employee was hospitalized.,1
"An employee was hanging printing plates with a coworker when the coworker released his stop button, allowing the printing press to jog forward to hang the next plate. The injured employee's left hand was caught in a pinch point, suffering lacerations.",1
"An employee was working from a step ladder with a reciprocating saw. The saw kicked back, causing the employee to drop the saw, which contacted his ankle lacerating it.",1
"An employee's head contacted a nail gun, which fired a nail into his head, puncturing his skull.",1
"Employees were checking to see if an automatic valve to a condensate line was operable. When air was applied, the valve opened and hot condensate went to the U-drain. An employee was standing on the U-drain and sustained second degree thermal burns on the calf and buttocks.",1
"Broken test tools came free after being stuck inside tubing on a workover rig. They struck an employee, breaking the employee's foot.",1
"An employee was splashed with chemicals while pressure washing a tank containment area, receiving chemical burns to his legs.",1
"Employees were installing floor decking on the second floor deck when one of the employees fell approximately 14 feet through the roof, landing on the concrete ground. The employee suffered head trauma.",1
"An employee was cleaning inside a machine when another employee started the machine. The employee suffered hand injuries, broken bones, and a deep laceration of the middle finger.",1
An employee using an air nozzle to blow out a grinder sustained a finger amputation when the grinder energized and the shredding wheel pulled the air nozzle and the employee's hand toward the wheel.,0
An employee was driving a forklift in reverse and hit a shelf which caused a pallet to break the employee's leg.,1
"An employee tripped on her purse strap while getting out of a vehicle, impacted the ground, broke her leg, and was hospitalized.",1
"An employee was conducting maintenance, with several other employees, changing out a wire roller. The doctor blade holder was lifted up on one end of the machine, came loose and fell down on the employee's thumb, fracturing it.",1
An employee was clearing a jam in a drop saw trimmer. The machine caught his clothing and amputated his left arm.,0
"On 4/17/19, an employee was checking a gun for jam when it discharged into the employee's upper leg, damaging the muscle and artery.",1
"An employee was on a scaffold performing overhead demolition of ductwork when a piece of duct swung loose and knocked the employee off the scaffold. The employee fell approximately 5 feet onto the concrete floor, suffering broken ribs.",1
"An employee was struck by a vehicle in a parking lot, suffering full-body injuries. Both employees were performing work activities at the time.",1
"An employee was changing transmission belts on a 40-hp cooling tower fan, when the fan turned on and amputated the left index finger.",0
An employee was operating a bar bending machine to bend rebar when their fingertip was amputated. The machine was unguarded at the time.,1
"An employee was shocked by a 480-volt piler power cord, suffering electrical burns to the left wrist and fingers with entry and exit wounds.",1
"On April 17, 2019, at about 7:50 a.m., an employee was working on a roof measuring a section to be cut out and replaced when the employee fell through the roof inside the building. The employee was hospitalized with head and spinal injuries.",1
"A valve assembly separated and a piece hit an employee's leg, breaking it.",1
A piece of iron became lodged in the jaw of a material processing plant. An employee climbed up the plant. Some material fell from the bottom of the jaw causing the counter-weight to rotate. This caused a belt to move and the employee's finger was pinned between a pulley and the belt. The employee's left ring finger was amputated to the first knuckle. The plant was locked out/tagged out at the time.,0
"An employee was installing water lines on a truck frame when the employee fell off the frame to the ground, suffering a head injury.",1
"An employee was cutting lumber on an upcut saw. The saw amputated his right middle, ring, and little fingers. It was guarded at the time.",0
"An employee was visiting a client in an assisted living facility. On the employee's way out of the facility, the employee tripped while exiting an elevator and fell to the ground, fracturing the left leg above the knee.",1
"While walking out of a cooler, an employee was struck by a forklift. The employee suffered a skin tissue injury.",1
"An employee was in a truck lowering a uniform rack to the ground with the lift gate when the employee fell approximately 3 feet out the back of the truck to the ground, fracturing the right wrist, five ribs on the left side, and a kneecap. The employee was hospitalized.",1
"An employee was struck by a vehicle in a parking lot, suffering a head laceration and bruising.",1
"An employee was unloading a garbage bin from a truck's lift gate when he stepped back, lost balance, and fell about 4 feet to the ground, fracturing his right ankle.",1
"An employee was helping load a CNC machine into a shipping container. The employee's finger was pinched between wood blocks, causing a fingertip amputation.",0
"A forklift had placed a pallet in a wrapper and was backing out of the wrapping area when it ran over an employee's foot, breaking it.",1
"An employee was helping to move a piece of casing off a guide wire from a rig. The casing was on a pipe rack. As the pipe was pushed to move it out of the guide wire, the pipe rolled and caught his right hand, pinching his middle finger and resulting in partial amputation of the fingertip.",0
"An employee was on a three-step ladder down-stacking boxes from the top shelf of a freezer to a lower shelf. While descending the step ladder, the employee missed the last step and fell to the ground, fracturing the left leg.",1
"As part of training, an employee climbed a ladder and attached a safety strap to the stand. While leaning back into the positioning belt, the employee fell feet first through the belt to the ground 12 feet below. The employee sustained a dislocated elbow and back pain.",1
"An employee was re-roofing a commercial building when the employee fell to the ground, suffering a head injury. Fall protection was not worn at the time of the incident.",1
"An employee was cutting lumber with a portable circular saw when it kicked back. The saw blade struck the employee's right index finger, resulting in a fingertip amputation.",0
"An employee was fixing uneven wood on a nailing machine conveyor when the conveyor started moving. His right middle finger was caught between two pallets. When he pulled his hand out, his right middle fingertip was lacerated, resulting in a fingertip amputation.",0
"An employee was inspecting a metal bar that had come out of a straightener machine when a second metal bar was sent out of the machine, causing the employee's finger to become caught between a metal bar and the table. The employee's right ring finger was amputated at the first knuckle.",0
"An employee was driving an SUV out of the carwash. He lost control of the vehicle and it struck a second employee and another vehicle. The second employee suffered multiple injuries to the back, legs, and rear.",1
"An employee was ascending a ladder to stock items when her foot slipped from the second step (approximately 21"" from the floor). She tried to grab onto the ladder to steady herself but missed and fell. Her left leg and knee struck the ladder, a shelf, or both. She suffered a fractured left knee/tibia.",1
"An employee was going up in a bucket truck. Nearby, police were pursuing a vehicle that then struck the bucket truck.  The employee was ejected from the bucket that was about 10 feet high and struck the alleyway. He suffered scrapes and contusions to the face.",1
"An employee was servicing a wrapper machine when it cycled or shifted unexpectedly, catching his right middle finger between the chain and sprocket. His right middle fingertip was amputated.",1
"An employee was on a scissor lift using a manual 2-inch hand threader, threading a piece of pipe to put a valve on. He strained his back, suffering a herniated disk.",1
"An employee was operating a universal swing arm press machine when her fingers entered the press. The press then came down on her fingers, amputating the right middle and ring fingertips.",0
An employee was removing a metal obstruction from a bailer guide when the ram moved and pinned the employee's right index finger between the scrap metal and the bailer resulting in amputation of the fingertip.,0
"An employee was working in an oil lube area and pulled on a bungie cord attached to an oil drain pan stand. The cord dislodged a flat tip screwdriver that was in the nipple valve of the oil drain pan. The screwdriver flew and hit the employee in the eye, causing an injury that required hospitalization.",1
"An employee was cleaning the masa process line with a high pressure water hose. As the employee removed masa dough from the machine, their left middle finger was caught in the rotating blades resulting in an amputation injury to the finger. The machine was energized at the time.",1
"An employee was changing out a compressor at a store. While sweating the lines, the pressure built up in the line and the oil shot out along with flames, causing second degree burns on both arms from his fingertips to the elbows and a slight burn on his lower abdomen.",1
"An employee was cleaning away excess dough on a hopper when the machine was activated. The guillotine engaged and cut the employee's right thumb, resulting in a distal tip amputation.",0
"An employee was entering the back of a truck when the truck pulled away from the dock and the employee fell to the concrete ground, suffering a contusion and lacerations of the cerebrum.  The employee was hospitalized.",1
"An employee was on a roof, painting the exterior of a garage. He fell to the ground and suffered a broken hip.",1
"An employee was pulling a strip of beef off the belt with force when his right second finger was caught between the meat and the trim saver, receiving lacerations. He was hospitalized.",1
"An employee was bailing fish when the bail line received pressure. The employee lost control and fell backwards, striking his head on the grating. He suffered a laceration to the back of the head and a brain bleed.",1
"An employee was bleeding down injection lines, using a 36-inch pipe wrench, to let hydrates thaw overnight. A valve was opened and pressure (about 900 psi) was released, causing a section of pipe to come loose and strike the employee's leg above the knee. He was hospitalized.",1
"An employee was attempting to clean the applicator rollers on a coil coating machine when the employee's right fingers were caught between the in-going rollers. The employee was hospitalized and sustained amputations to the right small, ring, and middle fingers.",1
An employee was using a sledgehammer to remove a bearing from a completed wheel set. A piece of metal broke off the sledgehammer and penetrated the employee's bicep.,1
"While cleaning inside a wind turbine tower, an employee stepped through an open access hatch and fell to the deck below.  The employee sustained fractures to the face, arms and legs. Fall protection was not worn at the time of the incident.",1
"An employee was attempting to unjam a machine when the trimmer plate lowered, smashing his finger between the trimmer plate and the machine frame. His fingertip was partially amputated. The machine was energized and guarded at the time of the incident.",0
"An employee was loading a steel griddle/grill into a customer's vehicle fell when it fell onto her foot, resulting in a fracture and partial medical amputation of the right pinky toe's distal phalanx.",0
An employee was operating a drill press. His glove was caught while he was cleaning sawdust off the machine. The employee sustained a severe laceration to his hand.,1
"An employee was assembling corrugated boxes and was operating a pneumatic stapler when he attempted to move a box that was stuck. His fingertip was then caught in the stapler, resulting in a fingertip amputation.",1
"An employee was working on a seamer when it rolled over his right thumb, causing a partial amputation. The seamer was unguarded at the time of the incident.",0
"An employee was helping to remove a large, damaged 30-foot-high by 4-foot-wide insulated metal building panel from a structure using a mobile telehandler equipped with a vacuum attachment. The telehandler unit retracted the loosened panel from the structure and set it on the ground with its small dimension (4 feet) on the ground. At this point, the panel was standing 30 feet straight into the air when it detached quickly from the vacuum and fell on the injured employee, breaking his right femur.",1
"On April 18, 2019, an employee was removing a dent in a tank using a hydraulic jack and pipe assembly with a saddle. The pipe at one end came loose and fell on the employee's left hand, causing a crushing injury. The employee was hospitalized and required surgery.",1
"An employee was climbing a ladder to the second floor when he fell 6 feet to the ground, suffering a non-displacement right wrist fracture, hairline right patella fracture, and left arm fracture.",1
"An employee tripped on a crack in the sidewalk, fell, and fractured his left femur. He was hospitalized and had surgery.",1
"An employee had taken a 10-foot x 1-inch piece of steel rod out of a straightening machine. The piece of steel was buckled in the middle. With his glove on, the employee grabbed the end of the piece of steel. At that time, the buckle released, causing the end of the steel to jump up and hit his hand. He was hospitalized for surgery on a broken middle finger on his left hand.",1
"An employee was running a lathe to finish a repaired shaft. The employee was using sandpaper to finish the shaft when the employee's shirt was caught in a rotating piece, pulling the employee's arm and hand into the rotating piece. The employee suffered a left ear laceration as well as a broken left arm, wrist, and hand. The employee's left little finger had to be surgically amputated.",1
An employee was unloading baggage and suffered a heart attack.,1
An employee was moving a steel plate onto the plasma cutting table when the steel plate hit the plasma table gantry shutoff cable and pivoted down. The employee's right middle fingertip was caught and amputated between the steel plate and the grating of the plasma cutting table.,0
An employee was visually inspecting the feed of shavings to a furnace when his hand became caught in an auger at the top of the furnace. He sustained multiple fractures and lacerations to the right hand and wrist.,1
"While exiting a building, an employee slipped on the edge of a sidewalk and impacted the ground, resulting in a fractured left ankle and hospitalization.",1
"An employee was walking on a sidewalk, headed towards her car, when she tripped over some sod and fell to the sidewalk, fracturing her left femur. She was hospitalized.",1
An employee's right leg was pinched between a rolling welder and a structure. He suffered an avulsion and fracture to the leg.,1
"An employee was tightening tie-down straps on a flatbed truck when he fell off the truck to the ground, suffering a broken right hip.",1
"An employee was watering plants from a platform that was 7 feet high when a golf cart hit the platform, causing the employee to fall off and onto the ground. The employee suffered a broken wrist and chin laceration.",1
An employee was operating a sit-down cleaning machine to clean the shop floors. He used the machine to push a heavy metal cart out of the way and pinched his right thumb between the cart and the machine. The thumb tip was amputated.,0
"An employee was retrieving a test sample from an ingredient feeder when her right thumb made contact with the auger screw of the feeder. Her right thumb was caught between the screw and the auger housing, resulting in a digit amputation of the right thumb.",0
"An employee was using a hand torch while a second employee was cleaning the floor 2 to 3 feet in front of the hand torch. While the second employee was standing in front of the wall-mounted hand torch array, an internal explosion dislodged the cover, which then struck her in the back of the head. She was hospitalized with a concussion and laceration to the back of the skull.",1
An employee was performing maintenance on a baler. Knives on the baler amputated the employee's right hand.,0
"On April 19, 2019, an employee was weighing the filament density on a twisting machine. The machine was equipped with a semi-portable control panel with a toggle button. While the employee was operating the toggle control, his right hand was inside the machine. The carriage moved and pinched his right index finger, resulting in an amputation to the finger.",0
"A temporary employee was parking a pallet jack and stepped off the jack when it rolled on top of his right foot, pinning it against a guardrail. He suffered pain in his right foot.",1
"On April 19, 2019, at approximately 9:00 a.m., an employee was breaking down pipe with a sledge hammer when he threw out his back and experienced lower back pain. He was hospitalized with a herniated disk at the L4 and L5 vertebrae.",1
An employee was on the ground spreading dirt/gravel with a metal concrete rake when they slipped on loose dirt and fell onto the rake. The employee suffered a rib fracture and a contusion on the spleen.,1
"Three employees were moving a wheeled order-picking cage cart from a trailer at a dock onto a warehouse floor. The cart tipped over and fell on an employee, breaking the employee's back.",1
An employee on the walking beam of a pumping unit had just removed the horse head of a pump jack when a bolt on the beam broke and the beam tilted over. The employee slid down the beam until he hit a motor at the bottom of the pumping unit and fell to the ground approximately 6 to 7 feet below. He was hospitalized with a head laceration and left leg laceration.,1
"An employee was operating a skid steer loader, which struck the leftover stub of a basketball pole. The employee was jolted forward and struck his head on a rollover protection bar. He suffered a broken neck and a cut forehead and was hospitalized.",1
"An employee was repairing a crimper when it clamped onto his right index finger, amputating it to the first knuckle.",0
"An employee was working with two coworkers to load an ice bin onto a truck using a hand cart and the liftgate on the truck. The employee fell approximately 4 feet from the truck onto the pavement below and sustained two broken ribs, a bruised lung, facial abrasions, and lost consciousness.",1
"An employee was putting food away in a refrigerator when a back door opened and hit the refrigerator door, causing it to swing and knock her to the ground. She suffered a shoulder injury.",1
An employee's thumb was amputated by a chain under a conveyor belt.,1
"An employee was welding a hasp onto a metal box. The machine activated and the welding head came down onto the employee's right hand, pinning it against the metal box. The employee suffered finger fractures and was hospitalized.",1
An employee was installing wiring for an alarm system at a construction site for a new apartment complex. The employee walked around a corner and tripped over a ladder left on the ground. The employee fell and injured their spleen.,1
"An employee was using a meat cuber when the employee's glove was caught in the cuber, pulling the employee's left hand into the cuber and resulting in a ring finger amputation at the first knuckle.",1
"An employee was walking by a pipe that was placed on a stand to be unclogged of liquid asphalt. The heated asphalt bubbled out of the pipe and onto the employee as he walked by, burning his arms and legs.",1
An employee was hospitalized with a chemical burn on his foot.,1
"An employee was putting a load ramp away when the ramp slipped and fell on the employee's left foot, crushing the big toe.",1
"An employee was climbing a 4-foot ladder when his foot slipped. As he fell, his leg became entangled in the ladder. When he impacted the ground, he broke his right ankle and left heel.",1
"An employee was driving a baggage tug tractor in the rain. As the employee was maneuvering a turn, the tractor struck a pole. The steering wheel caused internal bruising and lacerations to the employee's intestines.",1
"An employee was removing a bolt from a beam when the beam shifted, crushing his hand. He sustained a broken ring finger below the first joint and a broken index metacarpal.",1
"The injured employee was helping to load a toolbox onto a trailer. As employees were lifting the toolbox, the rigging slipped, amputating the tip of the injured employee's right pinky finger.",0
"An employee was disconnecting a rail car loading arm when Meta-Para-Cresol (M-P-99) splashed on him, causing chemical burns to his face, back, arms, and legs.",1
"An employee was on a mud pump skid, on his hands and knees, searching for a pin that had fallen. A tool fell onto the employee's right little fingertip, amputating the tip.",0
"An employee was cleaning a floor when a forklift slid on the floor and struck him, fracturing his ribs and back and damaging his kidney.",1
"An employee was assisting a vehicle that was on fire. When the employee was putting out the fire under the hood, the smoke came back towards his face. He was hospitalized due to smoke inhalation.",1
An employee was in the office zip tying two individuals to a security vehicle and was struck with a taser twice in the mid-section causing the employee to suffer a heart attack.,1
"An employee changed the gasket on top of a reactor and was descending from the top of the reactor (20 feet above ground) on a fixed ladder. At around 5 feet, the employee slipped and fell off the ladder, hitting the ground. The employee suffered a fractured L4 vertebra and a compressed disc.",1
"An employee was working at a stretch wrapper, applying stretch wrap to a 6-foot-wide tufted roll of carpet. His vest and jacket got caught and were pulled between the roll of carpet and the cradle. His right arm was also pulled between the carpet roll and the cradle. He suffered friction burns to his lower back, right arm in the bicep area/armpit, and right hand.",1
"An employee placed his right hand on a stack of pipes to stabilize himself to step up onto a platform. The piece of pipe slipped and rolled, pinching his right pinky finger between two pieces of pipe. His fingertip was amputated between the nail and first joint.",0
A maintenance employee was using an air-powered grease gun to grease some floating mooring bits when it injected grease underneath his thumb.,1
An employee was moving a 30-to 40-gallon container of cement/mortar that was on wheels. The container tipped over onto the employee resulting in a back fracture.,1
"An employee was operating a forklift to break down produce in boxes stacked on a pallet when he disembarked from the forklift. The forklift kept moving and rolled over his right ankle, breaking it.",1
"A truss fell on an employee, breaking his leg. He was hospitalized.",1
An employee was on a metallic ladder pulling a box from a shelf when he fell and struck his head.,1
"An employee was threading a machine when his left thumb came in contact with a cutting blade, resulting in a thumb tip amputation. The machine was guarded at the time.",0
An employee fell from an 8-foot ladder and hit his head on the ground.,1
"An employee was crossing a 21-inch-high assembly line when she fell to the concrete floor, breaking a vertebra in her lower back.",1
An employee was weeding grass when his right leg was caught in a fence. His tibia and fibula were broken.,1
An employee was standing inside a scissor lift changing a trolley on a hoist. The scissor lift came down and pinched both of the employee's feet.,1
"On April 22, 2019, an employee was changing out a drive belt. The employee's hand was pulled into a pinch point, causing the amputation of a fingertip.",0
"An employee was backing up a forklift when it struck a parked manlift. The employee's right hand was pinched between the forklift's support arm and the counterweight on the manlift. He suffered broken bones, contusions, and lacerations to the hand.",1
"An employee was lifting and moving a coil with an overhead crane. He was crushed between the coil he was lifting and another coil, suffering a cracked vertebra and internal bleeding.",1
"An employee was using a mini excavator to excavate 15 inches of dirt for a flower bed when the excavator rolled over, hitting an employee that was spotting for a gas line. The injured employee suffered a fractured pelvis on the left side.",1
"An employee stumbled and fell on the concrete floor, fracturing her right knee. She was hospitalized.",1
"On 4/22/2019, an employee in the meat room was using a sausage grinding machine when his hand came into contact with the moving parts of the machine, resulting in a fingertip amputation.",0
An employee had been picking oranges all day when he began to suffer from heat exhaustion. He was hospitalized.,1
"An employee was installing a corrugated tin roof on a building. He fell from the roof to the ground, suffering broken arms.",1
"An employee was standing on top of an auger cleaning the beater bars in the silage box. Two coworkers were outside of the box replacing a gearbox. After replacement, they tested the gearbox, which caused the auger to turn on and pull the injured employee's left leg into the auger. The employee suffered left leg lacerations.",1
An employee was carrying a box of lettuce from the delivery truck to the walk-in cooler when the employee experienced pain in the right hip/nerve damage.,1
"An employee was lowering a pallet when the pneumatic cylinder that was holding the pallet malfunctioned. The cylinder did not release the pallet. The employee walked down the stairs of the platform to the lower level and unplugged the hose of the cylinder. When he released the air, it activated the ram of the cylinder. His hand was positioned between the frame work of a metal dumper and the ram of the cylinder. The employee pulled his hand out. His left index finger was amputated at the first joint.",0
"An employee was running a hot stamp machine when it became plugged. As she tried to grab the plugged material, the machine amputated her right second fingertip.",1
"An employee was using loading equipment to install a metal guardrail on a bridge. He was jockeying the rail into place when his right index finger was caught between the guardrail and the equipment, resulting in a finger amputation.",0
"An employee was working on the motor of a stand up order picker and ran the drive to allow the brushes to break in. The employee was walking around the order picker, tripped and fell, catching his hand in the rotating metal cooling fan and sustaining a fingertip amputation.",0
A temporary worker was nailing boards when a nail from a nail gun punctured his forearm.,1
"An employee was walking in the product unit basement area when he stepped on a drain cover for a U-drain that was not fully seated, causing him to twist/roll his ankle and break his leg.",1
"An employee was climbing up a 28-foot extension ladder to replace a cable wire when he missed a step, lost his balance, and grabbed onto a communication drop. The drop broke, causing him to fall  approximately 15 feet to the ground. He suffered two broken vertebrae and bruised his ribs and left shoulder.",1
"On April 22, 2019, a parked golf cart rolled onto an employee, injuring his right leg. He was hospitalized and underwent surgery.",1
"A 3-foot, 1,500- to 2,000-pound bucket  became detached and fell onto a spool, then rotated and flipped over on top of an employee, breaking the employee's skull and a vertebra in the employee's back.",1
"A trailer tire sidewall exploded while being inspected for leaks, breaking bones in an employee's right arm.",1
"At 9:30 on Monday 4/22/2019, a temporary employee was loading material into a machine hopper when he fell off the elevated platform to the concrete surface below, sustaining wrist, shoulder, and eye socket fractures. The employee was hospitalized.",1
"An employee was removing moss from a roof when the employee fell from the roof to the ground, suffering a concussion and requiring hospitalization.",1
An employee was bonding flat rubber with glue using a rolling mill when his left hand was caught in the rolling mill. Four fingers and half of his left hand were amputated. The machine was running at the time.,1
An employee was running a tractor with a sand wagon to fill cow beds. He was stepping over the power take off (PTO) of the tractor and his pants became caught on the shaft and pulled the employee into the rotating shaft causing severe contusions to his legs and a broken thumb.,1
"An employee was standing on a potato trailer and pulling on a rope attached to a tarp. The employee fell from the potato trailer to the ground, resulting in a broken right ankle that required hospitalization and surgery.",1
An employee was using a knife to cut chicken when the knife punctured his right upper abdomen.,1
"On April 22, 2019, an employee's left hand was caught in a rubber mill, resulting in an amputation.",1
"An employee was securing a load of aluminum bundles with straps to a flatbed trailer when the top load of aluminum fell and struck him, breaking his left arm and left leg.",1
An employee's left index finger was amputated between two pieces of metal on a portable generator.,1
"An employee was on a 12-foot stepladder, placing a banner on a wall. He fell about 8-9 feet and broke his left femur.",1
"On April 23, 2019, an employee was struck on the head by a falling hose pump. The employee was hospitalized.",1
"An employee was under a recently planted oak tree when the wind caused it to fall. The employee was struck and trapped beneath the tree, suffering multiple fractures and paralysis.",1
A maintenance employee was filling oil into a vacuum pump. He opened the reservoir and was burned on his shoulder and abdomen by the hot oil. The machine was running at the time of the incident.,1
"A maintenance employee was repairing a gasoline pump at an automotive service gas station. The gasoline line may have potentially leaked and ignited with an unknown source, causing burns to both of the employee's arms that required hospitalization.",1
"An employee was tightening the packing bolts on a beam pumping unit in the oil field by using an air impact wrench when the head of the unit, while in a down stroke, came in contact with the impact wrench forcing it downward and mashing the tool against the left index finger. The employee sustained a partial amputation of the left index fingertip.",0
"An employee was cutting plywood concrete forms. As he was picking up a piece of wood, the sawblade amputated his left little finger.",1
"An employee was about to climb down from a scaffold when he fell onto a concrete slab 6 feet below. He landed on his shoulder and head, his hard hat cracking on the ground; he suffered bleeding to the left ear and a concussion, as well as bruising to the left shoulder. He was hospitalized.",1
"An employee had his left hand on the concrete floor while installing a vapor barrier on exterior walls. A conduit pipe hanging above fell out of its fitting approximately 12"" and hit his left index finger, cutting off approximately 1/2"" - 3/4"" of the tip.",0
"An employee's hand entered a machine that had been turned off and was caught between two rotating gears, resulting in a finger amputation.",0
An employee was cutting a piece of metal that got caught on the blade. The saw blade amputated the employee's right ring and little fingers.,1
"On April 23, 2019, at approximately 3:10 p.m., an employee was attempting to unclog a nut depositor venturi when her pinky contacted the moving parts within the equipment that dispense the nuts, amputating her fingertip.",0
"An employee was replacing a vehicle's serpentine belt's plastic cover when his finger was caught in the serpentine belt, resulting in a fingertip amputation.",0
"An employee was walking toward the deli counter to give produce to a customer. She attempted to move a box on the floor with her foot when she tripped and fell on her left side, fracturing her left humerus.",1
"An employee was returning her housekeeping cart to an off-site storage area when she fell on the ground while running from a snake, suffering a fracture that required hospitalization.",1
"On April 3, 2019, an employee was unjamming a belt using a crow bar. His right thumb was smashed against an electrical panel and electrical box, causing an amputation above the first knuckle.",0
"An employee was removing/loosening webbed material from a rotating roller when the employee's left index finger was caught in the material, causing an amputation to the first knuckle.",0
"An employee was arguing with another employee, felt chest pains, and was hospitalized for cardiac arrest.",1
An employee was using a pry bar to repair a tire when the pry bar came loose and struck the employee under the eye and in the face. The employee was hospitalized with a facial injury and a broken eye socket.,1
"At about 8:10 p.m. on April 23, 2019, a mounted border patrol agent ran into a branch and was knocked off his horse. He suffered a laceration, a concussion, and a hairline fracture to a vertebra in his neck. He was hospitalized.",1
"An employee was working inside a single-phase pad-mounted transformer, pulling wires to energize street lights. A cordless drill that was being used to tighten a lug created a phase-to-phase contact inside the transformer, resulting in an arc flash. The employee suffered second-degree burns to the face and torso.",1
An employee was clearing out land to install a fence around a perimeter when the employee suffered a possible head injury.,1
An employee was attempting to change tong heads when the tongs activated and amputated his left thumb.,0
An employee was on break in his personal truck when he shot himself in the right leg with his personal gun.,1
"An employee slipped while working in the front of the fitting room desk and fell to the floor, fracturing the right hip.",1
A forklift was lifting a piece of scrap metal.  The scrap metal cut the strap tying it to the forklift and fell onto an employee. The skin on the employee's right arm was removed.,1
"An employee was operating a conveyor belt slitter when their thumb was caught between two rollers and pulled into the belt slitter. The employee sustained a degloving injury to the right thumb, requiring hospitalization and a skin graft.",1
"An employee was installing roofing material about 7 or 8 feet from the edge of the flat roof of a one-story residential house. He stepped on an insulation board and lost his balance, falling 8 feet to the concrete patio below and fracturing his left elbow. He was hospitalized.",1
"An employee was working at a hotel under construction, standing on a ladder while pulling wiring. The employee fell and suffered a broken right knee. The employee was hospitalized.",1
An employee was operating an electric pallet jack that collided with another forklift. The employee's lower left foot was injured on the other forklift's forks.,1
"An employee was on a house's second-story roof, cleaning the siding using pressure washing equipment. He stepped backwards and fell from the roof to the ground and landed on his back. He suffered blunt force trauma to his chest. Fall protection was not being worn at the time.",1
"An employee was walking on a concrete walkway when he slipped on wet concrete, fell, and hit the back of his head on the concrete ground. He was hospitalized.",1
"An employee was closing the rolling door on a box truck when the employee's hand was caught in the folds of the door plates, lacerating a finger and requiring sutures.",1
"An employee was on the roof on a single-story building working on cleaning out the rain gutters. He was standing and bent over to reach the gutter. He lost balance and fell to the ground, sustaining broken bones in the legs and was hospitalized.",1
"On April 23, 2019, an employee was testing the voltage on a 34.5-kV, 4160/2400 step-down transformer when an arc flash burned the upper right part of his body. He was hospitalized.",1
An employee was walking behind a horizontal receiving auger when he slipped and his hand contacted the auger. He suffered a broken arm and a bad cut on the hand.,1
An employee was replacing a transmission line. The line shocked and burned the employee's hand and thigh.,1
"A maintenance employee was working on the roof. He was walking down the fixed stairs from the cooling tower when he missed a step and both his knees gave out. He caught himself on the rail and did not fall. He suffered from torn tendons behind both kneecaps, requiring hospitalization and surgery.",1
"While picking up a mold plate with an overhead crane, an employee's left thumb was crushed between a lifting shackle and a mold plate, resulting in a broken thumb and laceration.",1
"An employee was using a crane to load a truck with stacks of granite when one of the stacks broke and crushed three of his right-hand fingers, breaking them. His middle finger had to be amputated to the first knuckle.",0
An employee fell approximately 9 feet from a porch roof to the ground below while installing a metal roof. The employee was hospitalized with tailbone and vertebrae fractures.,1
"On Wednesday, April 24, 2019, an outside dumpster caught on fire. During the evacuation of the building, the employee inhaled smoke. The employee was hospitalized due to smoke inhalation and respiratory issues.",1
"An employee was assembling a parapet with a nail gun when she attempted to move by sliding. Her finger was on the trigger when it hit her leg, causing the nail gun to fire a nail into her upper thigh.",1
"An employee was placing merchandise on shelves while standing on a stool ladder when she fell to the floor and fractured her leg, requiring hospitalization.",1
"An employee was putting an off-road vehicle back in a barn. The vehicle hit a cattle gap, went airborne, and flipped over. The employee suffered head trauma and a broken left arm.",1
An employee was trying to move a vending machine when his right little finger became lodged between a cooler and the frame of a truck. The fingertip was amputated.,0
"An employee was trying to prevent a patient from leaving the hospital. The employee's head struck a door and the ground, and a bone in his neck was broken.",1
"An employee was using a crane to load a concrete I-beam on a flatbed when the crane's chain broke, releasing the I-beam. The I-beam struck the employee, knocking him to the flatbed and then the ground. He suffered fractures to the back, shoulder, and knees.",1
An employee was working in a laboratory and was pouring 1:1 HN03 (nitric acid) out of a 1000ml flask into a 4-liter reagent bottle inside a fume hood when the neck of the 1000ml flask broke and HN03 splashed onto the employee's chest and face. The employee was hospitalized for chemical burns to the chest and face.,1
"An employee was walking to a conference and crossing the street when the employee tripped on a curb and fell to the concrete, breaking the left arm. The employee was hospitalized.",1
"An employee was cleaning/wiping the rollers on an envelope converting machine. The employee's right ring finger was pinched between the rollers, causing an amputation to the fingertip with an avulsion of the nail plate.",0
"An employee was making a repair to the transport system as one belt was tracking off. He was adjusting the belts when his left hand made contact with the moving chain and sprockets, amputating his left middle fingertip. The chain and sprockets were unguarded at the time of the incident.",0
"An employee was reaching out the front of a boom lift cab to remove something on the hood of the machine when his leg hit the controls, thus lowering the boom on his fingers at a pinch point. His right ring and pinky fingers were smashed, resulting in medical amputations of the fingertips.",0
"At about 8:00 p.m. on April 24, 2019, an employee was bitten by an insect while working at an outside bar. She suffered pain and swelling on the left hand and was hospitalized.",1
"An employee was cutting a 4-by-4 board on a saw when the board jumped. The employee's sleeve was then caught in the saw blade, resulting in a left forearm cut to the bone that required surgery.",1
An employee was filling and sealing 50-pound bags of fertilizer. The employee was correcting the alignment of a bag going into the sealer unit when his right middle finger was caught. He suffered a fingertip amputation.,0
"An employee was using a power swivel to connect pipe when the employee's hand was caught between the swivel and a chain, resulting in finger amputations.",0
"An employee delivered nitric acid to a chlorine tank that was mislabeled, causing a reaction with a cloud that affected seven employees and required evacuation. An employee was hospitalized for respiratory irritation due to chemical exposure.",1
"An employee was exiting a bedroom when the employee tripped or lost balance and fell in the doorway between the bedroom and kitchen. The employee's head struck the tile floor, causing a hematoma and brain bleed.",1
"An employee was on a roof, offloading shingles and accessories from a conveyor. As he turned from the conveyor to the material stack, his wrist came in contact with a roof vent on the top of a shingle stack. He suffered a laceration to a ligament in the wrist.",1
"An employee was attempting to clear misplaced product on a conveyor in the packaging area when her glove was caught in the conveyor, resulting in an amputation to her left ring fingertip (approximately 1/8 to 1/4 of an inch).",0
An employee was sitting in a friend's car during break when the employee pulled a gun out of a bag and it discharged into the employee's left thigh.,1
"An employee was using a saw to cut stakes for concrete forms when the saw slipped and struck the employee's leg, causing a laceration.",1
An employee was attempting to shut down the power service to a pole when he made contact with a live wire and received electrical burns to the left hand.,1
"An employee was struck by a metal door that flew off its hinges due to a sudden explosion, suffering a left arm fracture.",1
An employee was cleaning the outside of a galvanized pipe. The employee's left index finger was caught between the cleaning plug and the couplet hole; the tip was amputated.,1
An employee was trying to adjust the air pressure on a reamer machine. The tip of the employee's right little finger was amputated.,0
"An employee was standing on an uprooted tree that was lodged in a healthy tree attempting to cut a limb on the uprooted tree. The employee's primary climbing line was attached to the healthy tree and positioning lanyard was attached to the uprooted tree. After making the cut, the employee was walking back to the healthy tree when the uprooted tree became dislodged from the healthy tree.  The employee fell approximately 60 feet to the ground with the uprooted tree, suffering a fractured femur, pulmonary and head contusion, and forehead laceration.",1
"An employee was function-testing a hydraulic-driven winch on a hydraulic test stand. As he was removing excess oil that had wept from the winch's side plate bottom drain hole, the drum rotated and amputated his left index fingertip.",0
"An employee working in a road construction zone was struck by a motor vehicle that entered the work zone, suffering a broken leg.",1
"An employee was unloading a trailer with a clamp truck when the employee went down hard into the trailer with the clamp truck, suffering a back injury.",1
An employee was replacing a belt on an induction fan when two of his fingers were cut and a fingernail was split on the pulley.,1
An employee was assisting the operator of a vertical form fill sealing (VFFS) machine. He was attempting to align the plastic bags for printing and using the machine activation button to jog the machine when the tip of his left middle finger was caught and amputated between the clamps.,0
"On April 25, 2019, an employee tripped while leaving a storage room. She fell to the floor, dislocating both shoulders.",1
"An employee was operating a machine that winds fiberglass duct when her left pinky finger was caught between a chain and sprocket, causing the amputation of her left pinky fingertip and injury to the adjacent finger.",0
An employee was attempting to remove a part from a CNC machine when it actuated and amputated his right middle finger near the first knuckle.,0
"An employee was standing on the bed of his tractor trailer helping to unload mesh when he lost balance and fell backwards off the trailer to the ground. He sustained 3-9 broken ribs, a fractured clavicle, hairline fractures on his back and a head laceration.",1
"An associate was at this branch location to attend a managers' meeting on a rainy day. The associate entered the side door just before 2:00 PM and walked across the entrance rug. Her foot was in a cast and when she stepped onto the tile floor, she slipped and fell onto her left hip. She was hospitalized for a broken hip that required surgery.",1
"An employee was exiting a trailer with a loaded pallet jack when a metal patch on the floor gave way a bit due to the weight of the loaded pallet jack. The employee lost control of the pallet jack and the handle struck him in the pelvis, causing a deep contusion that required hospitalization.",1
"An employee was leaving her register to take a break when she stumbled and fell to the floor, landing on and fracturing her right hip.",1
An employee was doing a patch repair on a pipe and experienced an inhalation reaction to the epoxy material in the patch while heating it.,1
An employee lacerated three fingers while operating a circular saw and was hospitalized.,1
"An employee was stocking shelves in a supply closest when the employee tripped over a piece of trim on the floor and fell to the same level, fracturing the right hip.",1
"An employee was working inside a 14-foot excavation laying pipeline when a clog of dirt (football size) hit his shoulder. He turned around and ran, then hit his head on an excavator bucket. He was hospitalized with a severe head injury and concussion.",1
An employee was climbing a ladder and fell to the floor.,1
"On 04/25/2019, at approximately 5:27 p.m., an employee was adding rubber to the top of an extruder when the employee's right hand contacted the auger that was below the rollers. All four fingers on the employee's right hand were surgically amputated.",0
"On 4/25/19, an employee went to sit in a chair and missed the chair seat. The employee fell to the floor and suffered injuries to her right hip and elbow. She was hospitalized and had surgery.",1
"An employee was running a plasma punch machine and caught his right middle finger between the plate and the roller of the machine, resulting in a middle finger amputation.",1
An employee was pushing a loaded cart into the oven and struck the oven. His left ring finger was pinched between the cart and a tray that had shifted after he had struck the oven causing a fingertip amputation.,1
"An employee opened a door to go downstairs and caught a right hand finger between the door and the door jamb, resulting in a fingertip amputation.",0
A forklift operator was entering a battery charging area when his foot was caught between the forklift and a guardrail. He sustained a foot injury.,1
"On April 25, 2019, a cook was splashed with hot water and burned while pulling a pan containing water out of the steamer.",1
An employee was checking the line and fell 15 feet from a ladder onto pavement. The employee sustained a fractured the left wrist and lacerations.,1
An employee was setting up a machine when it energized. A blade in the machine amputated the employee's little finger and caused several lacerations to other fingers.,0
An employee was attaching the dock plate to a truck in the loading area when the truck drove forward and the employee fell approximately 4 feet to the ground between the dock and the truck. The employee sustained a knee injury that required surgery.,1
"An employee tripped over a broom and fell. Her head struck a metal cart, and she suffered a head laceration and lost consciousness. She was hospitalized.",1
An employee was carrying a nail gun when a 2.5-inch trim nail discharged from the gun into his abdomen.,1
An employee was retrieving a food item from a freezer when she slipped on ice and fell. The employee struck her head and lost consciousness. The employee was hospitalized for a head contusion.,1
"On April 25, 2019, an employee received an amputation on the left pinky finger while picking up cookies on a conveyor. There was a transition point (1/4 gap) between the conveyor and tracking cable. The employee's finger was caught within the cable, which resulted in hospitalization and an amputation.",0
An employee had been spotting for a truck. The truck backed into a light pole which fell over and hit the employee causing broken vertebrae in the lower neck or upper back and a laceration to the head.,1
An employee was dumping trash into a compressor when the lever to the trash hopper shot back and amputated the tip of his left pinky finger.,0
An employee fell off the steps of a residence while delivering mail.,1
"An employee was performing maintenance on an edger when other maintenance employees dropped a collar. The employee went to pick it up and was struck in the arm by a log kicker, suffering right arm fractures.",1
An employee was fixing an airline utilizing a lift. He fell over the rail as he was repairing the airline with a pair of pliers and struck a tank car below. The employee fractured his pelvis.,1
"An employee was climbing down a 10-foot stepladder when it shifted. He fell about 5 feet to the ground below, breaking his left wrist.",1
"While standing near a mini-excavator, an employee was struck by the track of the machine, suffering leg and foot fractures that required hospitalization.",1
"An employee was operating a side boom on a hill, when it fell, rolled twice, and ejected the employee onto the ground. The employee sustained a broken skull and cervical injuries.",1
An employee was hospitalized for third degree burns after an arc blast occurred while working on a 480V switch gear.,1
"On 4/25/2019, an employee was installing a roll for the tube mill and amputated a fingertip.",0
An employee was stocking the shelf in the front of the store when a customer came into the store and stabbed him in the neck and face. The employee was hospitalized.,1
"An employee was unloading an A-Frame with materials when the A-frame fell on top of the employee after cutting the retention band. The A-frame collapsed and overturned onto the employee causing a dislocated shoulder, bruises and contusions.",1
"On April 25, 2019, two employees were carrying a broken toilet outside to dispose of it in a dumpster. The toilet slipped and cut an employee's wrist, involving tendons and an artery.",1
An employee was cleaning a window and fell about 8 feet from a stairway landing to a lower level. The employee suffered multiple broken bones.,1
"On April 26, 2019, an employee was moving plastic pallets around to get a pallet in place for batching. The employee tripped on a pallet and fell backwards, suffering a compression fracture to the back. The employee was hospitalized.",1
An employee was handling a live ground wire and suffered burns to his finger and the palm of his hand.,1
An employee was replacing switch gear in the basement of a building. The main breaker failed to trip resulting in an arc flash. The employee suffered burns to the torso and upper extremities.,1
An employee was directing traffic and was struck from behind in the legs by an I-beam that was knocked over by a crane. Both of the employee's legs were fractured.,1
An employee was unloading a mini-excavator from a trailer and broke a bone in their arm.,1
"An employee was trying to free a stuck enclosure gate using a wrench and the wrench struck his left eye, rupturing it.",1
"An employee was shocked while servicing a dryer at a customer's home. The employee lost consciousness, regained consciousness, and was hospitalized.",1
"An employee was operating a shear to cut stainless steel and amputated their left ring, middle, and index fingertips.",0
"While unloading a tractor-trailer, an employee fell off the flatbed trailer platform to the ground. The employee suffered a broken skull and possible brain bleeding.",1
"An employee had been filling anhydrous tanks when a valve released anhydrous ammonia liquid and vapor. The employee's googles were blown away from their face and the employee sustained burns and blisters to the face, eyes, and mouth.",1
An employee was unclogging a drain with a mechanical plumbers snake when his right hand was entangled in the hose resulting in the amputation of the right thumb tip.,0
"An employee was inspecting the bottom part of a stack of skids when a powered industrial truck's forks struck the employee in the back of the head/neck, causing a possible concussion.",1
An employee was running on the field to retrieve a baseball bat and ball when he fell to the ground and broke his left femur.,1
An employee was performing a screen change on an extruder and was burned on the right forearm by molten polyvinyl butyral (PVB) after sliding the door open.,1
A maintenance millwright had used an aerosol degreaser to clean the shaft and key on a power press prior to MIG welding. Vapors and/or overspray were in the cavity surrounding the area and did not dissipate prior to striking an arc. A fire resulted that caused burns to the employee's body.,1
Two employees were troubleshooting the sensor on a skid steer unit. The unit started and an engine component partially amputated an employee's right index finger.,1
An employee was walking down a corridor when a stack of drywall fell over and landed on the employee's left ankle fracturing it. The employee was hospitalized.,1
"An employee was laying out wire mesh for a precast concrete form when he slipped on a piece of corrugated duct that was being placed in the product. He fell to the ground, dislocating his right hip and breaking his right femur. He was hospitalized and underwent surgery.",1
An extruder auger crushed an employee's finger.,1
The injured employee walked behind a forklift that was being operated by a second employee. The injured employee's foot was caught and crushed by the forklift.,1
An employee was using a crane to separate two 700 lb. steel plates when his hand was caught between the two plates which resulted in the amputation of the tips of the third and fourth digits on the left hand.,0
"An employee was operating a forklift in the yard. After unloading a pallet of shingles, he headed towards his supervisor, set the forklift's brake on parking, and exited the forklift. The forklift rolled forward and pinned him between his forklift and his supervisor's parked forklift. The employee sustained a fractured pelvis.",1
An employee was lifting a patient and suffered a neck strain. The employee was hospitalized.,1
An employee was moving a 1000 lbs. tire rack. His right middle finger was caught between tire racks and amputated at the first knuckle.,1
"An employee was directing a garbage truck as it backed up. He tripped and fell on the road, suffering a head injury and abrasions.",1
"An employee fell off a 16-foot ladder to the concrete below, suffering a broken right ankle.",1
"While an employee was making a template on a table saw from 3/4"" plywood, the blade kicked the plywood up and the employee's finger contacted the blade. The employee's middle finger was amputated.",1
"An employee was using a bandsaw to cut a block of ice. The block jerked and drew the employee's hand into the saw, which amputated the employee's left little fingertip.",0
"An employee was unloading his truck using a lift gate. He fell off the gate, injuring his hip.",1
"A temporary employee was using a de-riveter machine to remove rivets from a brake shoe. The employee placed a sheet of material down on the table of the de-riveter and then placed the brake shoe on top of it. The employee held the brake shoe in place on the table and engaged the de-riveter. During the machine's cycle, the brake shoe shifted on the surface and crushed the employee's right ring fingertip between the shoe and the de-riveter table, resulting in amputation of the fingertip.",0
The injured employee was installing metal cap facia using a 20-foot extension ladder at a residence. The ladder was set up on top of gravel and shifted laterally. The employee fell approximately 13 feet to the ground breaking the left humerus.,1
"An employee slipped and fell while pulling a hose, striking his head on the ground and suffering head and neck injuries.",1
An employee was working on a crane and suffered a broken leg.,1
A journeyman iron worker was working on top of a piece of iron to cut it loose from the rigging. The piece rolled causing the journeyman to fall off the piece and strike his ribs on the connecting point.  The employee suffered two fractured ribs.,1
"A client choked an employee and repeatedly punched him in the head and face, causing swelling and bruising. The employee was hospitalized.",1
"An employee was on a roof behind a parapet wall, guiding a rough-terrain forklift as it raised a trash bin to the roof. The bin crushed the employee's right middle finger against the wall. She was hospitalized and the fingertip was medically amputated.",1
An employee was repairing a grease gun. The piston dropped from the gun and amputated the employee's right index fingertip.,1
"An employee was welding the outside of a tank. Developer fumes within the tank ignited and the employee suffered burns to the right hand, arm, and shoulder.",1
An employee was manually lowering a lift. The elevator weight on the tensioning chain jammed between the frame and elevator; the employee's lower leg was broken as she tried to clear the jam.,1
An employee was lifting an animal carcass while tightening a chain and pushing buttons on the controls at the same time. His finger was amputated in the chain.,0
"An employee was cleaning a tank when a trouble light broke, causing the cleaning chemicals to burst into flames. The employee suffered burns to the hands and forearms.",1
"While cleaning and watering plants in a nursing area, an employee slipped on a piece of a plant on the floor and suffered a left knee injury.",1
"An employee was loading pigs weighing approximately 270 lbs. into a truck. The pigs were coming down the ramp in between the barn and the truck, when a hog got out, and struck the employee from behind causing a broken tibia.",1
"An employee was working with hot cooking oil. The oil spilled onto his right foot, burning it.",1
"While thermally treating stone, an employee suffered third-degree burns to the face and ear. The employee was found face-up on the floor.",1
"An employee was taking apart an extended conveyor after using it to unload a package. The equipment sliced his right thumb and he was hospitalized, undergoing surgery.",1
"An employee was disconnecting two barges that were pinned together for the duration of a project. After cutting through the pinned connection with a torch, the barge shifted unexpectedly on land and struck the employee's chest resulting in broken ribs.",1
"An employee had been working at his desk. While getting up from his chair, he tripped on a torn piece of carpet and fell backwards. The employee was hospitalized with a bruised back.",1
"An employee was closing a gate, when she was struck by her personal vehicle, which pinned her against the gate. She sustained injuries to the torso and a broken arm.",1
"On April 28, 2019, an employee was walking down a hallway she slipped and fell. Her left kneecap was fractured and she was hospitalized.",1
"While working in a cold warehouse, an employee suffered frostbite on the right index finger. The finger was amputated.",1
An employee was dropping equipment off an 8-foot roof when he lost his balance and jumped to the concrete ground approximately 11 feet below. The employee suffered fractured heels and ankle.,1
"On April 29, 2019, at approximately 1:45 p.m. an employee was attempting to lift a metal locker that had tipped over. The locker door closed on the employee's right middle finger resulting in a fingertip amputation.",0
An employee was delivering a package and suffered a dislocated ankle while stepping off a porch. The injury required surgery.,1
"A welder was removing a steel production part from a welding fixture using an overhead crane. He connected the lifting hook to the steel part's center post, then applied tension to the overhead crane. His little finger was pinched between the lifting hook and the steel part, causing the amputation of the tip.",0
"On 4/29/2019, an employee was conducting landscaping operations at a street corner. He pushed a tree branch out of his way, and it snapped back and struck his face. A splinter pierced the left upper cheek just below the eye. Safety glasses were worn at the time.",1
An employee was using a table saw to cut wooden frame parts and suffered amputation injuries to his left index and middle fingers.,0
"An employee was cutting plate steel with a flame cutter. Sparks caught his trouser leg on fire, causing second- and third-degree burns to his leg.",1
"On 4/30/2019, a carrier tripped over a raised piece of sidewalk and broke their right arm. The employee was hospitalized for surgery.",1
"An employee was stacking beams in a yard. A 10-by-4-by-6 block was in the middle of the pile. He lifted the end of the bundle of beams and got off his lift to pull the block out. The block twisted and its weight caught the tip of his finger on the flange, amputating the fingertip. He was hospitalized.",1
"An employee was placing parts on a conveyor system. The employee's left middle finger was caught in the system's chain and sprocket, resulting in the amputation of the fingertip. The system was guarded at the time.",0
An employee was repositioning a unit on a skid with a crane when his finger was caught between two units (transformers) causing a partial amputation to his right pinky finger.,0
"On April 29, 2019, at 4:30 p.m., an employee was assisting with the final pass of torqueing the hydraulic torque wrench when the tip of the employee's glove got stuck between the nut and the tool. The tool engaged and the employee's ring fingertip was amputated.",0
An employee was walking into work from his personal vehicle when he tripped and fell hitting his head on the concrete sidewalk. He was hospitalized with a head laceration.,1
"At about 5:30 a.m. on April 29, 2019, an employee reached into a machine, through a light curtain, to adjust a proximity switch. The carriage of the machine lifted up and pinned the employee against the roof of the machine. The employee suffered rib fractures and was hospitalized.",1
"A forklift was carrying two stacked pallets. The top pallet fell and struck an employee, who suffered a broken right leg and was hospitalized.",1
An employee fell off the loading dock.,1
"An employee was unloading a freight trailer when a sheet of metal shifted, pinning the employee's leg against a pallet and breaking it.",1
An employee was working in the hydro area cleaning flanges. The employee reached over to try and level the berry hone device (a rotating shaft inside of a pipe that removes burrs) that was in another pipe and the employee's left pinky finger was amputated.,0
"An employee was climbing a rail car ladder when he fell about 10 feet, hitting the ground and an adjacent rail car. He suffered a broken jaw and fractured vertebrae.",1
"An employee was walking into the guard shack, lost her footing and fell, hitting her head on a metal table. She lost consciousness and sustained a head injury.",1
"A nurse tank was being filled with anhydrous ammonia when a valve was opened. Ammonia was released, causing chemical burns to an employee's midsection.",1
"An employee bent over to hook up the truck to a fire hydrant to load water. While bending over, he herniated a disc in his back.",1
An employee was on the ground handling a cable attached to a crane. The crane touched a power line and the employee was shocked.,1
An employee's hand was caught between a hoist lifting crane device and a frame that was being hoisted causing a partial amputation.,1
"On April 29, 2019, at approximately 9:50 a.m., an employee was operating a punch press when their right index finger was pinched between the dye plate and the post being stamped causing a fingertip amputation.",0
An employee slipped on a tool box in a truck bed and fell to the concrete floor 5-6 feet below. He suffered a skull fracture and was hospitalized.,1
An employee was attempting to hook a piece of aircraft equipment to a trailer when his right index finger got caught between the pintle hook and tow bar resulting in a partial amputation.,0
"An employee was switching rail cars. After he stepped off a railcar onto the rail, the railcar that was just uncoupled rolled over his right foot. Three toes were crushed and the tips of two toes were surgically amputated.",1
"An employee was spraying walls and ceilings with paint. While trying to fix the tip of the paint sprayer, the air valve trigger was pressed and the employee suffered a small cut on the left side of the thumb. Paint got inside the wound and the employee was hospitalized for an infection requiring surgery.",1
An employee was unhooking a trailer when the trailer started to roll. The employee placed a hammer in front of the wheels to stop it and the employee right index finger was pinched between the trailer and the hammer. The fingertip was amputated.,0
"Employee 1 was operating a forklift in reverse and collided with another forklift, operated by Employee 2, that was stopped in an aisle. The forks of the moving forklift were raised and penetrated Employee 2's right leg upon impact. Employee 2 was hospitalized with lacerations and a fractured tibia.",1
"An employee was attempting to operate a newly installed dock leveler. It was not operating properly. He thought it was a pin on the leveler that was causing the hold up. The maintenance pin for the leveler is located underneath it and can only be accessed from the underside of the leveler.  He went underneath the leveler to release the pin. When the pin was released, the leveler fell on top of him breaking his leg and ribs and fracturing his back.",1
"The injured employee was on a ladder and was holding two wires out of the way for the lead technician. When the wires were energized, the injured employee was shocked. The employee sustained an electric shock to the right hand and a dislocated shoulder when he slid off the ladder.",1
An employee tripped and fell while walking on a tile floor. The employee sustained a left hip fracture that required hospitalization and surgery.,1
An employee was removing a pressure relief valve from a mud pump with a 36-inch pipe wrench.  The pipe wrench slipped and caught the employee's finger between the wrench and the mud pump resulting in amputation of the left middle finger and a fracture to the ring finger.,0
"An employee was working in a new underground table conductor that was not energized and was using a machine to conduct a test to determine if the table was ready to be energized. While using the machine, he was shocked (2400 DC volts). The employee was hospitalized with blisters on his right leg and red marks in his chest.",1
"The injured employee was working on the catwalk pedestal of an oil and gas drilling rig. While lifting a single joint of drill pipe, it fell out of the elevator and came down on the injured employee's left hand which was on the handrail. The employee sustained lacerations, fractures and nerve damage to the left hand.",1
An employee was exposed to high levels of carbon monoxide while working on a press line.,1
"An employee was removing roofing material from a retail store front canopy. The employee was walking on plywood that had been placed over the support braces. The employee stepped into an area that did not have plywood and fell to the ground. His fall was partially arrested by his safety harness. The employee suffered fractures to the face, nose and right arm.",1
An employee was using a table saw to cut wooden shingles. The shingles kicked back and the employee's hand contacted the blade resulting in a laceration to the left index finger. The fingertip was medically amputated.,0
An employee was disconnecting the rigging on a 6x6 precast panel and his right middle finger was caught between the cable and the anchor resulting in a partial amputation.,1
While troubleshooting a clogged pump an employee's fingertip was amputated by the gears in the pump motor.,1
Two employees were removing tin from a roof. One employee fell through a piece of unsupported tin to the concrete floor. The employee sustained a fractured left elbow that required surgery and a head laceration.,1
"An employee was sorting boxes in a recycling bin while standing on a concrete wall that was 18 inches high. As he stepped down, he twisted his knee and fractured his left tibia.",1
An employee was stepping off of a scale (approximately 6.5 inches) and his knee buckled. The employee was hospitalized for swelling.,1
"An employee was descending an 8-foot stepladder after doing a paint touch-up above a garage door when he missed the last step and fell to the floor, fracturing his hip.",1
An employee was working from a step-ladder approximately 14 feet above grade to paint a ceiling. The employee missed a rung and fell to the ground resulting in fractures to the face and wrist.,1
"On April 30, 2019, an employee stepped up onto a electrical box to gain access to plastic pellets inside a hopper. Due to oil, the employee slipped and fell off the electrical box approximately 46 inches tall. The employee was hospitalized with a fracture and laceration to their left pinkie finger.",1
"An employee was walking from the side of the building toward the parking lot. As she entered the parking lot area, she tripped over a parking space marker (marker /speed bump in the front of the parking space to prevent vehicles from rolling forward) and fell to the ground, breaking her left kneecap.",1
An employee was attaching sandbag straps to a lifting chain hook in preparation for lifting a bag when the employee's right thumb was pinched between the strap and chain hook. The tip of the thumb was amputated.,0
An employee was ascending a ladder and fell on his right side striking a metal grate. The employee suffered a torn tendon on his right arm.,1
"Just before 5:00PM, several employees were heading to the front office to clock out. Employee #1 used a company yard truck to drive to the front office. The tailgate of the company yard truck was down at the time. Employee #2 was walking and jumped onto the tailgate and then fell to the ground. The employee was hospitalized.",1
"An employee was putting pieces of steel on one side of pallets. He then turned around the pallets to put on other pieces of steel when the steel pieces slipped and hit his left foot, breaking two toes.",1
"An employee was operating a wood table cutting machine when the clamp smashed his left ring finger, resulting in a partial finger amputation.",1
"An employee was using a saw. As the employee tried to remove the trim piece with his left hand, the clamp closed and pinched his left index finger between the clamp and the material causing an amputation of the distal phalanx.",0
An employee was sweeping and picking up construction trash when the employee started having cramps and nausea due to possible dehydration and heat exhaustion.,1
"An employee was stepping out of a vehicle while making a delivery when he stepped into a pothole and broke his ankle, requiring surgery.",1
An employee was operating an ATV when the employee lost control and the ATV flipped over. The employee sustained a fractured left foot and was hospitalized.,1
An employee was installing cable. A saddle fell and hit him knocking him backwards. He landed on a rock on his back and suffered a spine injury.,1
An employee was driving a mini-roller onto a lowboy trailer when the mini-roller slipped off the trailer and rolled on its side. He struck his head and had his leg semi-pinned by the steering column. He was hospitalized with a head knot and possible concussion.,1
A cowboy was bucked off a horse and broke their left tibia and fibula. The cowboy was hospitalized.,1
"An employee was walking into the seat shop, slipped on water that had collected on the floor due to the rain and fell breaking their right hip.",1
The injured employee was walking out of the building next to a soft-side tandem-axle delivery truck when the soft-side and tie-down straps were released and the load fell onto the employee causing a broken hip and femur.,1
An employee was operating a press brake and amputated the right thumb tip.,0
An employee was adding dunnage while assisting in picking materials for processing. The material fell and struck his right thumb. The employee was hospitalized the next night.,1
A medical assistant suffered a respiratory reaction to a cleaning chemical and was hospitalized.,1
A crew was in the process of tripping pipe back into the well bore. The elevator failed to latch properly allowing the pipe to fall approximately 4 feet back down to the matting board. The stand of pipe bounced off the matting board and struck an employee who was working on the ground on the right foot resulting in amputation of the fifth metatarsal.,1
An employee contracted a bacterial illness while providing nursing care in the hospital.,1
An employee felt faint during a mandatory physical training run. He sat down on the running trail and started going in and out of consciousness. The employee was hospitalized.,1
An employee was attempting to remove a spur gear from a die casting machine. The spur gear slipped and caught his left finger resulting in amputation of the fingertip.,0
An employee was in the trench putting a gasket on the previous pipe joint when an excavator  started lifting the cut joint. The pipe swung like a pendulum as it was lifted and smashed the employee's left-hand fingers between the swinging pipe and the existing pipe. Two fingers were surgically amputated to the first knuckle.,1
An employee was performing maintenance on a dock plate. The docking plate chain that holds the plate in place failed. The employee received a crushing injury that resulted in amputation of the right ring finger.,1
"An employee was attempting to lift a manual pallet jack up 18"" with another employee. When setting the pallet jack down on the concrete walkway, the employee's left ring finger was crushed by the bottom of the pallet jack causing a fingertip amputation.",0
An employee was transferring hydrogen chloride (HCl) from one container to another when the HCl sprayed into the employee's face. The employee was hospitalized for inhalation burns.,1
An employee was adjusting a machine with a crowbar. The crowbar slipped and the employee's finger was crushed and amputated between the machine and the tool.,0
An employee was removing a rear trailer door. The door fell on him causing him to fall forward and hit his face on the ground. The employee suffered facial fractures.,1
An aerial zipline guide lost his grip on a rappelling rope and fell approximately 15 feet to the wooden landing platform breaking both ankles.,1
"An employee was using a backhoe to move dirt from the material holding area to a low spot where dirt is discarded for backfill. While the employee was moving the dirt, the soil collapsed under the weight of the loader, causing it to slide down an embankment before overturning. Upon overturning, the employee fell from the seat and landed on his left side, fracturing his pelvis.",1
An employee was mopping hot tar on a roof when his foot stuck to the roof. As he tried to move he fell and his arms landed in the mop bucket which contained hot tar. The employee sustained burns to the left arm and right hand requiring hospitalization.,1
"A maintenance employee was accessing the roof using a temporary ladder. When the employee grabbed the safety rail, it gave way and the employee fell approximately 14 feet. The employee struck lockers and then the floor resulting in four fractured ribs.",1
An employee was removing a tarp/cover from a container to unload cargo from the container. While standing on top of the cargo the employee reached for a tool while bracing himself against the cover ribs. The employee fell from the cargo to the bottom of the container and then fell from the container to the floor below. The employee sustained a fractured C2 vertebrae.,1
"A temporary employee was operating a metal crusher machine, which binds two metal pieces, when her right index and middle fingers were caught in the machine. She sustained multiple fractures to her fingers and was hospitalized.",1
"Employees were lifting the top plate from a stack of finished steel plates using an overhead crane. The plate hooks were inserted and positioned for hoisting. The crane’s trolley travel button was pressed. The steel plate began to slide off the stack and contacted an employee below the left knee, pinching the lower left leg between the plate and an adjacent stack of plates. The employee sustained a laceration to the left lower leg.",1
"An employee had been topping a dead tree while tied into an adjacent buckeye tree. When the employee had finished topping and was descending the tree, the top of the buckeye tree broke and the employee fell about 33 feet to the ground sustaining multiple fractured ribs.",1
An employee was backing up a golf cart to a dumpster. Her left leg was caught between the golf cart and a steel wall resulting in a laceration and fracture to the left ankle.,1
"An employee had been painting the steps on a log truck loader from the loader's ladder. The employee fell from the ladder to the ground, landing on his face and shoulder. He sustained a facial fracture requiring hospitalization.",1
An employee was working on the wood waste belt when their arm was caught in the power transmission drive. The arm was amputated at the bicep area.,1
An employee was shot in the chest during a robbery at the store.,1
"On May 3, 2019, an employee was placing pipe in a trench and was working in the vicinity of an excavator. A hydraulic line on the excavator ruptured causing the bucket to swing down and strike the employee. The employee sustained a fractured right arm and kidney damage.",1
An employee was unloading and picking up merchandise from a truck when several boxes of canned dog food fell from the rack. The employee was struck in the head and was hospitalized with internal bleeding.,1
"On May 1, 2019, an employee sustained a chemical burn to their right eye while pouring bleach from a gallon jug into a bucket of water.",1
An employee was unloading a truck when the employee slipped between the dock and the truck. The employee fractured a hip.,1
Employee was on a section of 7-foot scaffold doing propeller repair. The scaffold shifted causing the employee to fall to the ground and fracture the left arm.,1
An employee was hospitalized after a case of shoes fell on his right foot and his third toe became infected.,1
"An employee operating a pallet jack was making a turn near a racking system. When the pallet jack got too close to the racking system, the employee jumped from the pallet jack. He was pinched between the pallet jack and the storage rack and sustained a broken ankle.",1
"When an employee was relighting the dryer burner, the system malfunctioned and flashed. The employee's arm was burned.",1
"On May 1, 2019, an employee was cleaning out the cyclone of the cryo line downstream of the mill take-away. The employee contacted the rotary air lock and amputated his right middle, ring, and pinky fingers.",0
An employee was removing a bearing from a bearing loader. The bearing loader cylinder cycled when the extra bearing was removed resulting in a left middle fingertip amputation.,0
An employee was walking when their toe caught on the floor causing the employee to fall and fracture their wrist and hip.,1
An employee fell in the break room and suffered a head laceration.,1
"An employee had been burning off old cloth that was on tongs so it could be replaced. To cool off the tongs, the employee accessed the water coolant stream on the upsetter forging machine. The employee slipped and stepped on the pedal that engaged the machine and half of his left pinky finger was amputated.",0
An employee was test driving the company utility vehicle. The vehicle turned onto its side and the employee sustained a fractured left leg.,1
An employee was opening a treatment pot of the hot water loop system to adjust treatment levels in the system when hot water was released and caused second degree burns to his face and hands.,1
An employee was lifting a cover for a hole using a crane. A cheater bar that was inside the cover fell and struck the employee's face causing a laceration requiring hospitalization.,1
An employee was checking the cat pump for pressure loss. When he removed his hand it was sucked down and his middle finger was amputated. The machine was unguarded at the time.,0
An employee slipped while walking and fell backwards striking her head on the concrete floor. The employee sustained a severe concussion.,1
An employee fell about 40 feet off an order picker to the ground.,1
"On May 1, 2019, an employee was walking toward the packaging conveyor to remove boxes when she tripped and landed on her right knee resulting in a hairline fracture of her right patella.",1
An electric pallet jack operator was pulling a load of boxes when he was struck by a stand-up forklift and sustained a crushing injury to the right tibia.,1
An employee tripped on forklift forks while walking and fractured both wrists while breaking the fall.,1
"An employee was programming a press brake and leaned against a pallet that was being used for parts placement. The pallet tilted and spilled twelve metal parts, each weighing 11.5 pounds. Some of the falling parts fractured the employee's left foot.",1
A maintenance employee was transporting a pizza oven to a truck using a cart. The oven slipped from the cart during transport and hit the employee's leg. The employee suffered lacerations and cut tendons in the calf area. He was hospitalized for surgery.,1
An employee fell from a 6-foot scaffold and hit his forehead on a concrete block. He sustained a head injury.,1
An employee was helping dismantle and transfer dispensing equipment to a van in the parking lot. The employee stumbled and fell from the loading dock to the parking lot surface hitting his head and left shoulder.,1
An employee was deburring a small metal part and got a metal sliver in their left hand which developed an infection.,1
"An employee was trimming a tree when the rope slipped off the tree and the employee fell to the ground, suffering broken ribs and a broken back.",1
"An employee was picking product from a rack 64"" off the ground. The employee stepped back from the pallet on the rack and slipped off striking his leg on the order picker or the pallet and lacerating his right leg just below the knee. Fall protection was worn at the time.",1
"An employee was unloading carpet from a truck's trailer using a forklift. When the truck rolled forward away from the dock, the forklift fell off the dock and the employee was thrown from the forklift to the ground, injuring her left-upper back and two right-hand fingers.",1
"On May 1, 2019, an employee's thumb was amputated by machinery.",1
"An employee had been using a chipping gun to dislodge hardened concrete inside a plant mixer drum. The employee was being relieved by another employee and stood up to exit the drum. He then slipped on concrete debris, lost balance and fell forward striking his right side on a mixing fin in the drum. The employee fractured two ribs.",1
An employee was greasing and manually turning a bearing when his left ring fingertip was amputated.,0
An employee was operating a chainsaw and severely lacerated his left forearm.,1
"An employee was reroofing a flat roof of a single story dwelling. The employee went to get a chalk line from the ground. He then climbed back up the ladder and knelt down on the edge of the roof to snap the chalk line. The roof gave way and he fell 8 feet 4 inches onto a pile of landscaping posts and sustained fractured ribs. The employee was wearing fall protection, but it was not connected at the time of the fall.",1
"While an employee was operating a forklift at the loading dock, the tractor-trailer moved away from the dock plate. The forklift fell off the tractor-trailer or the dock and impacted the ground. The operator was hospitalized for a concussion and fractured vertebrae.",1
"A temporary employee was stacking wooden trusses about 3 feet high. When he was finished, a forklift lifted up the trusses to be moved elsewhere. The trusses on the forks shifted and the employee’s gloved, right ring fingertip got caught between the bottom truss and the forks. He sustained the amputation of his right ring fingertip without bone loss.",0
"An employee was going to heat up a burrito in the dog house (work trailer). When the employee went to turn on the stove/cook top, a flash fire occurred due to gas accumulation. The employee sustained burns to the face and neck, and had second degree burns on both hands.",1
An employee operating a forklift stepped off the forklift before it was completely stopped. Their left foot was caught between the forklift and a cement curb resulting in several broken toes.,1
An employee's right ring finger was caught between a door and the door frame when the door closed resulting in a partial amputation.,0
An employee was entering the utility closet when their finger was caught between the door and the door frame resulting in a partial amputation of the right fifth finger.,0
"An employee was adjusting and lubricating a chain and sprocket on a conveyor belt roller. His hand became caught between the chain and sprocket, causing a laceration to his right palm and an amputation of the right middle fingertip without bone loss.",1
"A maintenance technician was fixing a machine's roller belt, which was off center, when his hand got caught on the belt, causing the amputation of his right thumb.",0
An employee was loading a ball warp onto a cart. The cart tilted and the ball warp fell on him causing a fractured left pelvic bone.,1
An employee fell approximately 6 feet from an elevated area of a roof and sustained a head injury and a fractured leg and wrist.,1
"On May 2, 2019, at 9:00 a.m., an employee was working from an 8-foot step ladder while washing interior windows. The employee fell from the step ladder to the floor and sustained a fractured right elbow.",1
An employee was standing behind a press operator and adjusting a part in the press when the hydraulic press activated. The employee sustained the amputation of his right middle fingertip.,0
"An employee was unloading a van using a non-energized unloading device. While lifting, the employee's finger got caught in a pinch point on the unloading device resulting in a partial finger amputation.",0
An employee's left pinky fingertip was partially amputated when it was caught in a closing door.,0
"An employee was installing metal edging on roof fascia while working from an extension ladder when he lost balance and fell approximately 18 feet onto a pile of rocks. The employee was hospitalized with a broken pelvis and hip, and also sustained injuries to his knee, elbow, and heel.",1
An employee was walking toward an excavator to get the operator's attention when he fell in dirt. The excavator then rolled over his left leg and broke his tibia.,1
An employee was grinding a cast iron part when his hand slipped and contacted the grinding wheel. The employee's left ring fingertip was amputated.,0
"While operating a trash compactor on a client's property the injured worker noticed hydraulic fluid on the ground. He had punched the start button on the compactor and it began its cycle. While the compactor was cycling, he looked for the source of the hydraulic leak and in doing so reached forward to touch the hose. The hose became pressurized when the hydraulic ram reversed. There was a hole in the line and hydraulic fluid injected into his right thumb. He was hospitalized for chemical exposure and debridement of the thumb.",1
"As an employee was moving a pallet jack, she was caught between the pallet jack and the dock plate. She sustained lacerations and punctures to her right ankle.",1
"An employee was standing at the rear of a refuse truck, picking up a refuse container and was struck by a passing motor vehicle resulting in severe leg injuries.",1
An employee was operating a printing press when their hand was pulled into the rollers resulting in a fingertip amputation.,0
"On May 2, 2019, at approximately 11:45 AM, an employee was utilizing a hanger tool to remove fibers from the bottom of the C beam diffuser from the side of the beam. The employee was using the tool with his right hand and reached over the railing and grabbed the fibers with his gloved left hand. The fibers pulled the employee's left hand and forearm into the heated press roll (248 degrees F). The employee was hospitalized with severe burns to the left hand and forearm.",1
An employee fell from a ladder to the ground breaking both heels and dislocating an ankle.,1
"An employee was exiting his truck to make a delivery. While he was walking down the truck's ramp he lost balance, fell off the ramp and broke his left hip.",1
"An employee was working near the reverberatory furnace when it exploded. The employee sustained burns to his head, neck, hands, and legs.",1
"An employee was waiting to get delivery papers signed by the docking area when a 30-inch sheave wheel, weighing approximately 40-50 lbs., came down on his big right toe.",1
"On May 3, 2019, a forklift was moving pallets when the forks struck and broke a pipe. The injured employee went to examine the broken pipe when a blast of air struck the employee causing a surface burn to their right arm and hand.",1
An employee was trimming an oak tree on a golf course. A branch fell and swept the ladder from underneath him. The employee fell to the ground and sustained nine broken ribs and a partially collapsed lung.,1
"On May 3, 2019, at approximately 1:05 p.m., after completing a mail delivery at the front entrance, an employee was stepping down to the cement walkway and fell to the ground breaking her left femur.",1
"An employee was changing out a meter for a 277-480 volt line that was servicing a fire pump. There was an arc flash and the employee sustained burns to both hands, both arms, and the face.",1
An employee was repairing the speed sensor alignment on a plastic grinder's out-feed blower. A pipe wrench on the blower shaft spun around and caught his hand between the wrench and the blower housing resulting in lacerations to his hand and a crushing injury to his middle finger.,1
"The injured employee was holding an overhead garage door while a second employee was making repairs. While working on the door, the cable support broke. The door came down and the injured employee's finger was caught in the door track and amputated.",1
An employee was attaching a dumpster to the sanitation truck and got their right ring finger caught between the truck and the dumpster. The employee suffered an avulsion injury to the fingertip.,1
"An employee fell from the edge of the third floor of the building to the ground while unloading HVAC fan coils from a forklift basket resulting in a dislocated shoulder, two broken ribs and a bruised lung. Fall protection was not worn at the time.",1
An employee tripped while walking backwards in the service drive area and fell to the concrete floor. The employee's right femur was fractured and required surgery.,1
"An employee missed a step while getting down from a truck bed and fell 8-10 feet. The employee sustained fractures to the ribs, jaw, and both wrists.",1
"An employee was testing jig operations at the beginning of his shift. After a cycle did not complete properly, he reached to adjust the jig. The jig cycled another 1/2 inch causing the partial amputation of his left middle finger.",0
"A grain elevator operator was shoveling wheat toward the auger when he caught his boot/pant leg on the auger and was pulled in, resulting in amputation of his left leg.",1
"An employee had been manually loading a wooden shoe holding device with a die-cut urethane foam piece. As the employee moved the shoe into the cutting machine along a fixed pathway, one of the saw blades came in contact with the shoe, causing the 4"" blade to break into many small pieces. One or more of these pieces struck the employee’s fingers. The right-hand pinky and ring fingers sustained cuts that required stitches. The ring finger also required surgery for a cut ligament and blood vessel.",1
An employee was wrapping film around a new roll in a printing press during a roll change over. The employee's hand became caught in the press resulting in a fracture to the left forearm.,1
"An employee was teaching a non-violent crisis intervention refresher course. While being held by a student and demonstrating how to manage the movement of an aggressive person, the employee tore his right hamstring.",1
An employee was skiing down a designated route to reach a locker at the end of a shift. The employee skied over a patch of snow that was sticky and fell forward sustaining a fractured tibia requiring surgery.,1
An employee was operating a pallet jack when she became caught between the pallet jack and a pallet that was in front of her. The employee sustained contusions to both legs.,1
An employee was standing on the ground retrieving product from a pallet. A pallet truck struck the pallet on the ground and the employee's left leg was caught between the pallet and a rack resulting in a fractured fibula.,1
"On May 3, 2019, at 5:15 p.m., an employee had finished working for the day and began walking up a slippery grassy incline to his truck. He slipped and fell fracturing the right ankle. The employee was hospitalized.",1
An employee was hitting a concrete hose with a hammer to unjam a plug in the line. The plug released and the pressure in the hose caused the hose to whip around and strike the employee in the leg breaking his tibia and fibula.,1
An employee was staging pallets with a double selection pallet jack. The employee was reversing the pallet jack and making a turn when his right thumb was crushed between the pallet jack and a stationary rack.,1
"The injured employee was standing next to the drilling piping, holding material over the pipe joint to channel residual mud downward, ready to swing the disconnected piping out of the way. Oil-based drilling mud came out under pressure and three employees got mud in their eyes when their hard hats and safety glasses were blown off. One employee was hospitalized for an eye injury. The eye was burning, swollen and the employee was unable to see.",1
An employee standing on the back of a flatbed chassis was securing 3-inch cables to the block of a ship's crane. The crane began the lift and the cable rolled and landed on the employee causing a fractured left ankle and a strained right rotator cuff.,1
"An employee was trying to stop an aggressive patient that was springing toward a nurse and was pushed into a door frame, suffering head, neck, and elbow injuries.",1
"An employee was using a table saw to rip wood when the employee's right hand made contact with the spinning circular blade, causing a severe laceration between the right thumb and forefinger. The employee was hospitalized and had surgery.",1
An employee slipped while working on an extension ladder and fell six feet to the ground. The employee suffered a left knee injury and was hospitalized.,1
"An employee had been performing preventative maintenance on a shrink wrap machine. While replacing the chain guard, the employee's glove became caught in the chain drive and he sustained a right index fingertip amputation.",1
"An employee was performing preventive maintenance on a shrink wrap machine. After oiling the chain, the employee was replacing the guard and his glove became caught in the chain, amputating his right middle fingertip.",0
"On May 3, 2019, at approximately 8:00 AM, an employee was buffing a 4-foot long metal shaft on a lathe using an abrasive pad. The spinning shaft caught the employee's glove causing a partial amputation of the right thumb.",0
An employee operating a pallet jack turned a corner and his foot was caught between a rack and the pallet jack. The employee sustained a fracture to the top of the left foot and fractured toes.,1
An employee was performing maintenance on a ski lift motor. The employee was removing a coupling from the gear box when his finger was pinched between the belt and pulley. His left ring fingertip was amputated.,1
"An employee was repairing a window from the roof. While climbing back into the window from the roof, he slipped and fell approximately 11 feet rom the roof to the ground. He sustained fractures to the hip, femur, ribs, and back.",1
"An employee was engaged in pest control duties at a private residence. The employee lost balance while descending brick steps, fell, and sustained a dislocated left knee requiring hospitalization.",1
An employee was dismantling a scaffold. He was placing a section on the ground and when he turned around an aluminum plank fell 10 feet onto his left forearm causing a laceration that required surgery to repair a tendon.,1
"An employee walking back to the area after lunch break was struck on the head, neck and back area by a stack of pallets that fell. The employee sustained fractured ribs and possible fractured vertebrae.",1
"An employee was manually unfolding the chute (wing) on a fast loader machine (sorting conveyor), so boxes could be removed from a semi-trailer and sorted into individual department carts. The employee's left middle finger was pinched between a hinge and partially amputated.",0
An employee was operating the rotor die casting machine and amputated the medial phalange of his right pinky finger in the V block drawer.,1
An employee was operating a fork truck. The load was suspended above a plastic bin. When the employee reached to untie the load his shirt pocket caught on an operating lever and the load lowered with his arm inside the mast. The employee sustained a fractured right ulna and radius.,1
"On May 3, 2019, an employee was struck by a reversing forklift resulting in a fractured wrist and a broken ankle.",1
"An employee was cutting an 18"" pipe with a demo saw when the pipe kicked back. The employee was hospitalized with a cut on the chest that required stitches.",1
An employee was helping another employee dispose of an old forklift truck into a dumpster truck. After placing the forklift in the dumpster the forks of the forklift slipped and struck the injured employee's ankle.,1
"An employee was trimming a tree when the branch he was cutting came close enough to a power line that electricity arced over to him, causing burns to his right hand and toes.",1
"A maintenance employee was working alone on May 4, 2019. The employee may have been performing a sanding operation in an office and fallen from a 6-foot step ladder. He was found with head trauma and was hospitalized.",1
An employee was painting a window frame when a window frame that was above the employee fell and struck the employee. The employee was hospitalized with a head injury and a blood blister.,1
An employee lifted the cover off a five-gallon pail of liquid chlorine and was overcome by the chlorine gas that was released and was hospitalized for chemical pneumonitis.,1
"On May 4, 2019, at about 2:30 p.m., an employee had finished a service call and started having symptoms of heat stress including leg cramps. The employee was hospitalized.",1
An employee was on the lift gate of a box truck unloading when a cart containing food started rolling towards him. The employee jumped from the truck to the parking lot and fractured the right knee and left calcaneus.,1
An employee was repairing an agitator on the production line when their hand was caught in the machine's chain. The employee's pinky finger was severed and three other fingers suffered severe damage. The machine was energized at the time.,0
An employee tripped and fell while carrying a container of sulfuric acid. The acid splashed under the employee's face shield. The employee was hospitalized with first degree burns to the face and the right side of the neck.,1
"An employee was walking into the cooler, slipped and fell. The employee was hospitalized with a bulging disc in her neck.",1
"On May 4, 2019, a valet parking attendant fell from a continuous belt manlift that he was riding.",1
"An employee was siphoning curing compound and inadvertently swallowed some, causing him to vomit. The employee was hospitalized with mouth and stomach pain.",1
An employee was operating a rewinder machine. Her left middle finger was caught by a nip roller and pulled into the machine resulting in amputation of the finger.,1
"An employee was connecting elevators to pipe. He slipped on the wet muddy floor and while trying to catch himself, his right ring finger was caught between elevators and a tool joint at the moment when the driller was going to pick up the elevators. His finger was smashed and partially amputated.",1
An employee was performing maintenance on a pellet mill when his gloves were caught between the rollers and the die resulting in amputation of the right middle fingertip.,0
"A technician was working in a customer's attic replacing a cable line. As the employee pulled on the cable, he lost footing on the rafter and fell through the sheet rock ceiling to the carpeted floor 9 to 10 feet below. The employee was hospitalized with broken ribs.",1
An employee was learning to use a lathe when his finger was caught between the rotating chuck jaws and the tool rest adjustment lever. The employees right index fingertip was pinched and required medical amputation.,0
"On 05/05/2019, at 3:46 a.m., an employee was cleaning inside a cabinet when his headset came in contact with one of the cables and he sustained an electric shock. He was hospitalized.",1
"An employee was dehydrated so he went to the cafeteria to retrieve some water and then returned to his work station which is an exhausted, electric, heat-treating oven. Later, another employee walked around the work station and saw the injured employee lying unconscious on the floor. The employee sustained a fractured C7 vertebra.",1
An employee had been scraping ice from the walk-in freezer door. The employee slipped and fell on ice or a wet floor while coming out of the freezer and broke her right ankle. The employee was hospitalized and required surgery.,1
"Two employees were sitting on cradles (U-shaped steel beams) staged between the outer wall columns in Pot Room A to take a break. While the employees were seated, the outermost cradle began to shift. The employees stood and attempted to get out of the line of fire. The falling cradle struck one of the employee's legs causing a broken tibia.",1
An employee was polishing a tool on the engine lathe and his finger got caught.,1
An employee was cutting bone-in pork when his hand slipped and contacted the band saw blade. He sustained a partial amputation to his right index fingertip.,0
"An employee was performing maintenance on a refrigerator unit while working from a ladder. He went to step down from the ladder, missed a step and fell 3 feet onto the concrete floor. He sustained right rib fractures.",1
"An employee was working on a vehicle that was elevated on a car lift. While walking beneath the elevated car lift, the employee tripped on the 4"" lip of a well that the lift retracts into when in the stored position. The employee fell to the ground and broke the left ankle.",1
An employee was helping to lift a plate using a chain when the chain snapped and caused an amputation to the employee's finger.,0
An employee was cutting conduit with a battery-operated band saw. The band saw jammed and kicked back amputating the employee's left index finger to the nail bed.,0
An employee was loading incoming merchandise onto a pallet racking system using a forklift. The forklift struck a loose pallet on the floor and spun out of control. The employee was thrown from the machine and pinned against the racking system. The employee was hospitalized for internal bleeding.,1
"An employee was removing a three-inch diaphragm pump from a storage room in the accumulator house. After placing the diaphragm pump onto the ground outside the storage room, he tripped on a board protruding out from under the right side of the accumulator house and fell to the ground knocking the pump onto his right calf muscle and crushing it.",1
An employee was on top of a platform ladder near the door jam section of the facility. The ladder fell over and the employee suffered injuries to the shoulder.,1
An employee was climbing on the back of a fuel truck to remove a chain when he slipped and fell. The employee suffered two broken ribs and a punctured lung.,1
An employee was using a hammer to remove a sprocket when a piece broke off the sprocket and embedded into his left knee. It required surgical removal.,1
"On May 6, 2019, at approximately 3:49 PM, an employee working on a brake press and handling a piece of sheet metal (approximately 2' x 4'). The sheet slipped and lacerated the ulnar artery on his left wrist, just above the glove. The employee was hospitalized for surgery.",1
An employee reached into the oxygen compartment to obtain a broom. The ambulance door then closed on her left middle finger and amputated it.,0
An employee was cutting coil tubing with a handheld band saw. The tubing swung back and lacerated his knee.,1
"An employee loaded pallets onto a pallet jack. When he started moving the jack his leg was pinned between the pallet jack and a cinder block wall. The employee sustained a fracture to the lower leg and ankle, and a laceration to the heel.",1
"On May 6, 2019, at approximately 5:50 PM, an employee was taking a sample from a slurry tank when his fingers were caught in the slurry tank causing a partial amputation of the employee's right index finger and injury to his right pinky finger.",0
Two employees were adjusting the insertion machine. The machine unexpectedly started up and the injured employee's right thumb was caught in a pinch point and crushed.,1
An employee working near a conveyor was reaching for a bag of cooked chicken when her sleeve was caught in a rotating shaft resulting in a broken left radius and ulna.,1
"On May 6, 2019, at approximately 7:00 AM, an employee was pulling bones from a conveyor and stacking them on the table of a bandsaw. The employee turned to retrieve more bones and his left pinky finger struck the running saw blade causing a partial amputation.",0
"A driver was tightening a strap on his trailer to secure a load. The ratchet came loose and flew off the trailer hitting the driver in the mouth. The driver sustained an injured lip, broken mouth, and broken teeth.",1
"An employee was finishing the process of evacuating sugar from the pocket of a railcar. The employee lifted a portable air-operated railcar vibrator, weighting 47 pounds, to place it into the railcar. While lifting, he felt a pop in his back. He required hospitalization for a lumbar disk herniation.",1
An employee was adding a pad to the pusher in order to square up the boards on a running bundler machine. The employee's right index finger was caught between a lug and the guard around the chain and was partially amputated.,0
An employee was trying to remove a jammed nail in the pneumatic panel nail machine and suffered the amputation of the left index fingertip. The machine was not locked out at the time.,0
An employee was cleaning out a dryer when the rotary valve struck their left ring finger and amputated it to the first knuckle.,0
An employee was using a roller board device placed in a trailer to load packages. While moving the device his finger became caught in it. He sustained a severe laceration to his right index finger requiring hospitalization and a skin graft.,1
"On 5/06/2019, at 9:00 a.m., a temporary employee was installing ceiling tiles from a scaffold. She went to move the 3-foot scaffold, but the scaffold broke and she fell onto the concrete ground fracturing her right wrist which required surgery.",1
An employee was using a bucket lift to work on the hull of a ship. The employee's hand was on the top of the bucket when the lift made contact with the hull of the ship and the employee's hand was caught between the bucket and the ship's hull. Two fingers were damaged and a third finger was medically amputated.,1
An employee was operating a reach lift and caught his foot between the lift and a piece of equipment.,1
"An employee fell from a ladder which resulted in a fractured left wrist, right elbow, and possibly fractured ribs.",1
"An employee was walking during a demolition job when he tripped and fell onto the steel decking of the working surface he was on. He sustained several fractured ribs on the right side of the body, an injury to his right lung, and a laceration to the liver.",1
An employee was inspecting carriers traveling down the conveyor system and was walking over a mezzanine when his right foot slipped and was caught and amputated in the conveyor rollers.,1
The injured employee was standing in the back of a trailer at the loading docks. Another tractor trailer rolled into the trailer and crushed the employee's legs.,1
"An employee was helping to move pieces of scrap metal. When the magnet crane was loading the  scrap metal, the employee's left ring finger was caught and crushed between two pieces of scrap metal. The employee was hospitalized.",1
An employee was cleaning a room when the door to the room was slammed shut by a gust of wind. The employee's right middle fingertip was amputated in the door jam.,0
An employee walking across an existing metal roof stepped through a skylight and fell 20 feet to the floor below. The employee sustained two broken arms.,1
An employee had been operating a pumping unit at a salt water disposal facility when a fire/explosion occurred. The employee sustained third degree burns to 60 percent of his body.,1
"While scarfing a forging, a hot spark got inside the employee's protective clothing. When the employee opened his clothing, enough oxygen got in to allow the clothing to catch fire. The employee sustained second degree burns.",1
An employee was securing a trailer to the dock to unload products. The employee engaged the dock lock and extended the manual dock plate. The plate did not go down when the employee stepped on it. The employee then used a stand-up lift to lower the plate. The employee backed the lift towards the dock and his left foot was caught between the stand-up lift and the dock plate. The employee sustained a laceration and fracture to his left toe requiring surgery.,1
An employee was dismantling an engineered scaffold and fell approximately 57 feet. The employee was hospitalized for compound fractures to his legs and ankles and two fractured ribs.,1
"An employee was instructing a class on 5/6/2019, when the employee tripped over a stool and fell onto the floor. The employee was hospitalized with a left hip fracture that required surgery.",1
An employee was walking down the stairs at a new construction site when he tripped and fell. The employee suffered broken ribs and a broken left arm.,1
"An employee was walking in the accessories department by the price checker, tripped on a fallen mesh bag on the floor, and fell breaking the right elbow.",1
An employee was carrying a tool box to a coworker's car to place it in the trunk. The employee's finger was caught between the tool box and equipment in the car and the fingertip was amputated.,0
"An employee was flipping a concrete slab, tread side up, in preparation for shipping. As he was flipping the concrete slab, the load shifted and started to swing. The employee’s hand was caught between the slab and an adjacent object. The employee was hospitalized with a hand laceration.",1
"Two employees were replacing a 4 x 8 floor tile. The floor tile was on pedestals when the injured employee's finger was caught below the tile, resulting in an amputation.",0
"An employee was riding a horse and struck a guy-wire attached to a power pole. The employee suffered a head laceration, a broken finger and severed a finger.",1
"An employee was escorting a person who was having behavioral issues to a quiet place. The person assaulted the employee, head-butting him on the side of the head. The employee suffered a concussion.",1
An employee was being trained on the operation of a 5-step depositor machine that fills muffin baking cups with batter. While the working motion of the machine was being demonstrated the employee contacted the slicing blade resulting in amputation of the pad of a finger. The machine was unguarded at the time.,0
A cashier returning to her cash register tripped and fell. The employee struck her head on the ground and was hospitalized.,1
An employee was tossing old light fixtures into a scrap bin when he felt pain in his lower left quadrant. He was admitted to the hospital for surgery to repair a hernia.,1
An employee was operating a chop saw to cut wood and amputated the right index fingertip while indexing a board.,0
"On 5/7/2019, an employee was working on the ground level collecting falling brush from a tree and disposing of it in a wood chipper. A second employee was performing tree pruning and utility line clearance operations in a utility truck bucket approximately 45 feet high. The second employee began to cut a tree lead, approximately 15 feet in length, with a chainsaw. The tree lead then fell and struck the first employee's face, causing nose and facial lacerations, fractures, and contusions.",1
"A temporary employee had been cutting a section of a catwalk with a torch. After completing the cutting, the catwalk made a twisting motion and caused a light pole on the far end of the catwalk to fall and strike the employee. The employee sustained a puncture wound to his left upper cheek and a laceration on his back and was hospitalized due to symptoms of a concussion.",1
An employee was cutting wood blocks with a circular saw and lacerated their left ring finger. The finger was medically amputated at the first joint.,0
"A pipe slipped while an employee's hand was on it, breaking the employee's little finger.",1
An employee was positioning an alloy bar in a vertical band saw. His finger became caught between a horizontal clamp and the alloy bar and sustained an amputation.,0
An automotive technician was spinning a tire when his right middle finger got stuck between the rim and caliper. The fingertip was amputated and the employee was hospitalized.,1
"An employee had been using a bucket truck to repair a telecommunications cable at a customer's residence. The employee completed the job and got down into the truck bed from the bucket itself, and was then stepping off the platform at the rear of the truck when he missed a step, lost balance and fell from the back of the truck to the ground approximately 4-5 ft below. The employee landed on his tool belt and the right side of his lower back. He was hospitalized with four fractured vertebrae in the lower back.",1
While a crane was lifting a jaw crusher that was being removed for repair a section of ductwork that was connected to the building fell and struck employee on the head. The employee sustained a fractured vertebra.,1
"A hydraulic line on an excavator blew as the machine was picking up a 60"" tube. When it lost pressure and fluid, the arm suddenly came down and fully extended striking an employee and pinning him to the ground.",1
An employee slipped down the stairs and was injured resulting in hospitalization.,1
A painter working in the sonar dome of a submarine was power washing in a confined space when they fell three levels (approximately 20 feet) through a 2' x 4' access hole. The employee lost consciousness and suffered a contusion to the back of the head and pneumonia from inhaled water.,1
An employee was building a horse stall when an unlocked roof panel swung open catching the employee's left ring finger in the hinge and amputating the fingertip.,0
An employee was working inside a bucket truck replacing old power lines with new power lines. An arc occurred between the two lines and one employee was burned on his stomach and left arm.,1
An employee removed the radiator cap and was sprayed in the face by hot liquid. The employee suffered burns to the face.,1
"A jockey truck driver was attempting to make a U-turn and collided with another truck in another lane. The employee suffered blunt-force trauma to the neck, head and shoulder and a laceration on the head from initial impact inside the cab and subsequently striking the ground after being discharged through the driver-side window.",1
"An employee was cleaning a rotary die cutter machine, which takes sheets of corrugated cardboard and cuts out pizza boxes. The employee was cleaning out ink that accumulates at the side section of the ink metering rolls and suffered a partial amputation of the right index finger below the nail. The machine was not locked out at the time.",0
An employee was pushing a piece of plywood through a table saw and amputated his left ring and middle fingers. The index fingertip was also amputated.,1
An employee was carrying insulation to a second floor when he injured his lower back.,1
"While adjusting the rigging for the bull gear installation, the bull gear became unstable and shifted. The shifting gear contacted the mobile platform on which the employee was standing knocking the platform over and causing the employee to fall to the ground. When the gear shifted, the employee's right index finger was caught between the rigging and the wood block resulting in amputation of the finger.",0
An employee was operating the cabinet hinge press to attach doors to cabinets. The employee's left hand got caught between the cabinets and the machine which resulted in the amputation of a fingertip.,0
"The injured employee was picking up the first concrete tilt-wall panel. As they were bringing the panel in to set it, another employee put his pry bar in to catch the panel. When the panel hit the bar, the bar came back and struck the injured employee in the shoulder/neck area causing a cervical bone fracture.",1
"An employee had been sand blasting and removed a valve pipe plug when it became clogged. As the employee was removing material, air bled out of the system and caused the valve piston to shut and amputate the employee's left index fingertip.",1
"An employee was on a roof inspecting network hardware and cabling. As the employee transitioned from the roof edge onto a ladder, he slipped and fell 25-30 feet to the ground below and suffered a broken left leg and ankle.",1
"An employee was removing two stacked pallets from a truck while standing on a scissor lift. The top pallet of product fell and struck the employee knocking him to the ground. The employee sustained injuries to his head, back, arms and legs.",1
"An employee was watching boxed product enter the tape machine when his shirt was grabbed by the machine, pulling the employee's arm into the equipment. The flight arm retracted and pinched the employee's wrist between the flight arm and the frame of the machine. The employee suffered a broken wrist that required surgery.",1
An employee was pushing boxes down into the trash compactor with his foot. The compactor came down on his foot and fractured it.,1
An employee was positioning a pallet jack within a trailer when the pallet jack lurched back and pushed his right foot into an awkward position causing the dislocation of the first and second toes.,1
"A maintenance technician was changing a light fixture inside a CNC machine. When the employee was taking his hands out the machine, he was punctured by one of the machine's drill bits. The drill bits are sharp, needle like. The drill bit broke off inside the employees left index finger, just above the knuckle and had to be removed surgically.",1
An employee was feeding lumber into the up-cut saw when their right hand was caught in the saw resulting in the amputation of three fingers.,0
An employee was attacked by a customer with a knife. He was stabbed multiple times.,1
An employee was running the floor scrubber while other employees were cleaning up glass bottles. One glass bottle was put in the hopper and shattered. A glass fragment hit an employee's head and went into the employee's left eye causing a laceration to the cornea.,1
An employee was painting from a scissor lift and fell 30 feet between the platform and the middle guardrail to the ground below. The employee sustained a fractured hip. The employee's harness was not tied off to the equipment at the time of the incident.,1
An employee was teaching a class and while walking towards a student her leg twisted causing a fractured femur.,1
An employee fell from a 6-foot ladder and suffered a wrist fracture requiring hospitalization.,1
An employee was bending rebar on a fabrication/bending machine when his right pinky finger was caught between the two ends of a piece of rebar as the ends overlapped to form a circle. The employee's fingertip was amputated.,1
An employee was using a forklift to unload a pallet of 55-gallon drums from a tractor trailer. A 55-gallon drum containing hydrofluoric acid was leaking and the acid was released into the air. The employee was hospitalized for exposure to the acid including lung and throat injuries.,1
An employee was attempting to disconnect a trailer and stepped up onto the tractor's catwalk. He slipped on the wet surface and fell to the ground. The employee was hospitalized for a left hip fracture and multiple rib fractures.,1
"On May 8, 2019, a temporary employee was feeding candy into a machine hopper on a line while standing on a three-step metal ladder. The employee moved to the left and fell to the floor resulting in a closed head injury.",1
An employee was on a ladder that was leaning against a pole to disconnect cable TV from a client's house. The pole the ladder was leaning on broke at the base and the employee and the ladder fell to the ground. The employee sustained four broken ribs and a bruised lung.,1
"On May 8, 2019, an employee was operating a pelletizer machine when it became blocked with plastic. The employee's finger was then caught in the feeder of the pelletizer, resulting in a middle finger amputation.",1
A truck driver was climbing into the cab of his semi-truck when he lost his footing and fell backwards to the ground and struck his head.,1
An employee was working near a backhoe and was struck by the rig of the backhoe. The employee suffered a leg and hip injury and was hospitalized.,1
An employee was assembling a separator vessel onto a concrete slab when the vessel became unstable and fell onto the employee's right leg breaking it.,1
An employee was operating a winch to unload a 2-yard rear loading dumpster. The employee's gloved left hand got caught in the winch mechanism causing an amputation to the first joint of the left pinky finger.,0
"While loading and unloading meat from a trailer, an employee slipped on condensation that had accumulated on the floor and fell breaking his left ankle.",1
An employee was climbing a ladder and fell to the cement floor. He was hospitalized for a fractured tibia and fibula.,1
An employee was blowing chips off his machine when the machine was turned on and started to spin. The employee was repeatedly struck by the table chucks and suffered six broken ribs.,1
"An employee was operating a forklift to move product from one plant location to another. While backing up, his left hand was crushed between the forklift frame and a roll of product hanging from a hoist.",1
"A delivery driver slipped while walking on wet concrete and fell, landing on his right side. The driver's hand cart, loaded with food products, fell and amputated the driver's right middle finger.",1
"An employee tripped and fell, suffering a broken bone in the lower leg.",1
"An employee was installing a vent fan when it shifted and the employee's right hand was caught between the fan and a storage container. The employee pulled the hand back and the right index finger was de-gloved, resulting in a surgical amputation.",1
An employee was moving a cooling fan out of the way when his left thumb passed through the guard on the fan resulting in amputation of the thumb tip.,0
"An employee was moving a bulk cart when the employee's right index finger was pinched between the bulk cart handle and a support beam, crushing the fingertip. As a result, the employee's fingertip was partially amputated (no bone loss).",1
"The injured employee was holding a cart carrying a 10' section of drilling pipe. A crew attached a snatch block to the section of pipe to lift the piece and connect it to the rig to continue digging deeper. As the crew began to lift the section of pipe off the cart, dirt had accumulated on the chain causing the pipe to fall around 6 inches and crush the injured employee's right hand between the cart and the pipe. The employee suffered fractures and lacerations to his fingers.",1
"While closing the cash office's safe door, the employee's left index finger was caught in the safe door resulting in a fingertip amputation.",0
"Two employees were operating the cut-down saw in the distribution area. While the cut-down saw was in the lowered position, the injured employee was taking measurements. When the saw engaged, the injured employee's finger was caught in the saw guard and partially amputated.",0
An employee was cutting a 2x4 wood stud with a hand-held saw. The blade contacted his left hand and amputated two fingers and lacerated a third finger.,0
An employee was feeding a reel onto the pasting machine. The tension tightened on the reel and it snapped. The employee was hit by the recoiling reel and his left index fingertip was amputated.,0
An employee tripped and fell to the ground suffering injury to the right shoulder and elbow.,1
An employee was operating a magnetic-mounted drill to drill one-inch holes in a stainless steel I-beam. As the employee was using a fox-tail style brush to sweep metal shavings off the I-beam his right middle finger was caught in the rotating drill bit. His right middle finger was degloved and two other fingers were fractured. He also sustained a fractured wrist. The employee was hospitalized.,1
An employee was clearing an automated metering valve in a cyclone overspray collector and amputated the left index and middle fingertips when the metering valve actuated.,0
An employee had been walking on the flat roof of a school when he fell approximately 20 feet through a hole to the ground below. He was hospitalized with a fractured pelvis and fractured ribs.,1
An employee was monitoring a 4-inch pump line being used to pump flood water away from a retention pond next to the facility. Two men drove up to the employee and robbed and stabbed him with a box cutter. He was hospitalized for bowel injuries.,1
"An employee was sliding a mold frame onto a table with another employee when his finger was pinched between the table and mold frame, resulting in a partial amputation on the left middle finger between the bottom of the nail and first knuckle.",0
"An employee was operating a router machine mounted to the table. As he was pushing the wood, the router kicked back and his left ring finger contacted the blade resulting in amputation of the employee's left ring finger at the nail bed.",0
"An operator was showing another employee how to switch out the dies on a staker/crimper. The operator's right hand was caught in the staker/crimper and the middle, ring and pinky fingers were amputated.",1
"An employee was cleaning a water sprinkler system used to keep rock moist before use. The employee as standing on top of the material bin wall. The wall is about 2.5 to 3 feet thick. The height of the wall is about 8 to 9 feet (3-blocks high : 6ft long by 3ft high). The sprinkler system's pipes run on the top of the wall. The employee was cleaning one of the holes on the pipe with both feet on the wall. When the employee was standing up, his right foot slipped and he fell forward 9 feet into the empty bin that was next to it. The employee sustained multiple fractures including the right scapula, left pelvis, lumbar vertebrae and two left ribs.",1
"An employee was on an A-frame ladder while trying to loosen a nut from the top of the boom arm of a car wash. The employee was putting force on the wrench when the ladder tilted to its side and the employee fell five feet to the ground. The employee suffered a broken collar bone, nine broken ribs, and a punctured lung.",1
"An employee was installing a downspout from a ladder. The ladder was leaning on the side wall of a two-story house. The employee dropped the downspout and tried to catch it with his foot. The employee lost balance and tried to get his foot on the ladder, but missed the rung. The employee fell 12 - 15 feet from the ladder to the mulch bed resulting in fractures to his left arm, the first two left ribs and left scapula. The employee was hospitalized.",1
A warehouse technician was moving a cart with two pieces of granite countertop weighing 300 pounds. The cart tipped over and struck the floor. One of the broken pieces of granite landed on the employee's left foot and lacerated it. He was wearing steel toed boots at the time.,1
"An employee was operating a slitter machine when it malfunctioned. As the employee attempted to fix the malfunction, their hand slammed into the blade and sustained a laceration.",1
An employee was disassembling a scaffold and fell approximately 7 feet from the scaffold to the ground resulting in hospitalization for fractured ribs and an injury to the left side of his head.,1
An employee was adjusting freight in a trailer and suffered a compound fracture to the left foot. The employee was hospitalized.,1
An employee was putting away a pallet jack when the employee's foot was caught between a pole and the pallet jack. The employee was hospitalized with a broken foot.,1
An employee was standing on the doorway less than four feet high while setting up a press. The employee was stepping across tie bars and fell to the floor below. The employee was hospitalized for a fractured femur and wrist.,1
An employee was climbing a fixed ladder when he slipped and fell about 8 feet to the ground. The employee suffered a fractured left arm.,1
An employee was reaching up to close a trailer door from the loading dock when his foot slipped off the dock plate and the employee fell into the trailer breaking his right arm.,1
An employee went to sit down on a computer chair when it rolled away from the employee. The employee fell to the ground and hit her head.,1
"An employee was positioned on the second step of a three-step stepstool conducting inventory. While descending the stepstool, the employee missed a step and fell approximately 15 inches onto the floor and fractured the left hip.",1
"On May 9, 2019, an employee was performing a tool change on a quenching press and suffered multiple fractures to their left arm when their left arm was caught between the tooling on the hydraulic cylinder and the base plate.",1
An employee working on a metal roof fell 20 feet through an opening to the interior concrete surface below. He was hospitalized with a fractured wrist and two compressed fractures in his back.,1
An employee was performing internal maintenance on a waste sorting machine and sustained a back injury while attempting to crawl out of the tight space.,1
An employee was entering the facility and got his finger caught in the door resulting in amputation of the right middle finger.,0
"An employee was shearing a piece of 1/4"" thick X 4"" wide piece of steel flat bar on an ironworker machine. The employee's gloved, left middle finger was caught between the flat bar and the shear resulting in a fingertip amputation with bone loss.",0
An employee was inserting small pieces of steel into an iron worker when the clamping mechanism activated and amputated a fingertip.,0
"An employee was in a manhole when he mis-stepped and lost his balance. His right hand then contacted an energized wire, causing an arc flash that burned his right wrist. He was hospitalized.",1
"An employee was feeding rebar into a rebar bending machine when the employee's glove became caught and was pulled into the conveyor belt, resulting in the amputation of the employee's left pinky and ring fingers.",1
"On May 9, 2019, an employee was stepping down from a work platform when a forklift drove by and pinned his leg between the platform and the forklift tire. His leg was fractured.",1
"An employee was pushing product into a molding press when the employee's left index finger was smashed between the mold and the safety bar, resulting in a fingertip amputation.",0
An employee was patching a 2-inch hole in the bottom of a corn auger with a glove and duct tape. The auger caught the glove and pulled his thumb into the machine resulting in amputation at the first knuckle.,1
Employees were preparing to unload material with a crane. When the front outriggers were extended it contacted an employee's right foot resulting in a crushing injury and great toe amputation.,1
"An employee was climbing an A-frame ladder to access heating and air conditioning units on a building rooftop when the ladder wobbled and he fell off, requiring hospitalization.",1
"The injured employee was exiting a tractor-trailer. He stepped down onto the front tire, slipped and fell approximately four feet to the ground resulting in four broken ribs and a punctured lung.",1
"An employee was installing an exterior aluminum trim when the employee fell from a ladder jack scaffold to the ground, suffering a broken left wrist and fractured pelvis.",1
"Four employees were unloading a vehicle lift off the back of a trailer. As the injured employee and another team member were backing the lift down the trailer ramp, the back wheel of the lift got stuck in the space between the ramp and the concrete. This caused the lift to fall onto the injured employee and fracture his right ankle in two places.",1
An employee amputated a fingertip while cutting cabbage with a chef's knife.,0
An employee slipped or tripped and fell hitting her head on an autoclave cart. The employee sustained a head laceration.,1
"An employee was lifting a machine frame off of a welding bench and lowering it down to the ground. His fingers were under the frame to shift it when the frame fell and pinched his fingers, resulting in a fingertip amputation.",0
An employee was climbing a ladder to install a cable connection to a business and fell to the ground resulting in a broken bone in their back.,1
The injured employee was watching another employee utilize a drill reamer. The injured employee slipped or fell into the hole being reamed and contacted the drill reamer. The employee suffered a foot amputation.,1
The employee was operating a forklift to unload a rack from a trailer at the dock. The employee stopped the forklift and dismounted it. The forklift rolled forward and the employee's right leg was pinned between the racks and the forklift causing a right ankle fracture.,1
An employee was using a table saw to cut wood and amputated the left index fingertip.,0
"An employee was working overhead and brazing 4"" copper when a galvanized hanger was heated and he inhaled zinc. He later experienced respiratory distress and was hospitalized.",1
A temporary worker was operating a press brake to bend a 70mm piece of sheet metal. Their right hand was caught in the press when it was actuated resulting in amputation of the thumb tip.,0
"An employee tripped over an extension cord and impacted the ground, fracturing his left hip.",1
"An employee was removing a broken/damaged box from a conveyor when the employee's safety glove was caught in the gap between the conveyor side guards, resulting in a partial amputation to the right pinky fingertip.",0
An employee was cleaning out water and debris around column footers in preparation for filling with concrete. The employee experienced skin irritation to the hands including discoloration suggesting possible infection.,1
"An employee was assisting in the removal of a trench box from an excavation. The employee noted that a rigging hook was stuck on a corner of the trench box and went to unlatch it. At the same time, the excavator operator lifted the rigging and the employee's middle finger was caught between the rigging and the trench box resulting in a fingertip amputation.",0
"An employee was walking from a parking garage in downtown Pittsburgh to a client's office when she stepped off the curb and fell backwards into a puddle. She broke her ankle, requiring hospitalization and surgery.",1
"An employee was crossing the street with a client when a vehicle struck the employee. The employee sprained the bi-lateral knee, neck, and left and right shoulders.",1
"An employee was climbing out of the lower section of a crane cab when he grabbed a strap from the door for assistance and the strap broke, causing him to fall to the ground. He fractured his femur.",1
An employee was operating an aluminum extrusion press. He was attempting to cross over a table roll section with two automatic puller machines overhead and was struck by the returning puller and caught between the puller rollers. Four fingers on the employee's left hand were crushed and severely lacerated. The thumb was partially amputated.,1
An employee noticed that a pallet slipped on the shelving while he was centering a pallet below. The pallet shifted and fell on top of a box that was on the lower pallet. The employee's finger was pinched between the box and the lower pallet. The employee sustained a partial amputation of the left middle fingertip.,0
An employee was training a new employee on how to operate a hostler tractor to hook into a trailer. The trainee high-hooked the trailer and pinned the employee's left leg between the trailer and the tractor. The employee suffered a shattered left ankle.,1
"On May 10, 2019, at about 7:00 p.m., an employee was working on a fleshing machine to remove the manure roller when the roller (weighing about 1200 pounds) started to roll. As he attempted to move out of the way, the roller struck and broke his lower right leg.",1
"An employee slipped and fell on the concrete sidewalk while walking, sustaining a broken left arm and cuts.",1
An employee was climbing down a concrete column form and fell. The employee suffered a dislocated shoulder and a laceration.,1
An employee was operating a forklift and pinned a leg between the forklift and a pillar. The employee's left leg was fractured.,1
"An employee was straightening boards when a board fell and hit the tip of his left little finger, causing a partial amputation.",0
An employee fractured his left ring finger while disconnecting a baggage cart.,1
"An employee was on a scaffold shaking mortar when the employee stepped backward and fell approximately 20 feet between two boards to the ground below. The employee suffered a collapsed lung, fractured vertebrae, and a skull contusion.",1
"On May 10, 2019, at approximately 3:00 p.m., an employee was putting a tarp on a semi trailer and fell to the ground below. The employee suffered a head laceration and fractured ribs and vertebrae.",1
An employee was in the middle of a procedure in the lab. The employee went to get an injector and while turning left and walking her left leg gave out and she fell forward to the ground resulting in a hip fracture.,1
"An employee was loading a hand truck onto a trailer, slipped and fell out of the trailer to the ground below. The employee fractured a hip.",1
An employee was feeding cardboard into a flexo folder feeder when a jam occurred. As the employee tried to unjam the machine his left pinky fingertip was amputated.,0
An employee was using a 10- foot rolling staircase to perform repairs on the roof of a fifth wheel travel trailer. He slipped from the staircase and landed on his feet causing injury to his right heel.,1
An employee wearing cut resistant gloves was utilizing a retractable knife when the knife slipped resulting in a partial amputation to the left thumb.,0
"An employee was accessing the area above a drop ceiling using a ladder. While he was ascending the ladder, it shifted and he lost his balance, falling approximately 4 feet. He struck a table and then landed on the floor, requiring hospitalization for fractures.",1
"Two employees were preparing to stop working for the day and had started to lower the scissor lift to the ground. Both employees were tied off with their fall arrest systems. A gust of wind caused the trusses on the building to fall. It resulted in a domino effect and the last truss struck the scissor lift that was approximately 16 feet high, causing it to tip over while the employees were in it. One employee sprained his ankle and was treated and released that day. The other employee suffered injury to both elbows that required surgery and a laceration on the forehead that required stitches.  He was hospitalized.",1
An employee was unloading a flat-bed trailer. A building material item fell from the trailer and struck the employee's leg causing a knee fracture that required surgery.,1
An employee was conducting a food product demonstration. The employee took a bite of the product and had an anaphylactic reaction requiring hospitalization.,1
An employee was unloading steel with a crane. He placed an 8-foot wood block under some angles. The angles shifted and the block popped out and struck him causing him to fall. The employee suffered a concussion and a neck injury.,1
"An employee was getting out of his truck on the driver's side when he fell to the ground, breaking his right hip bone and requiring hospitalization.",1
"An employee was connecting a vibratory hammer using a 2-inch, 10-foot choker. The employee contacted the point of operation at the sheave and cable and their right ring finger was amputated below the nail.",0
An employee was cutting meat with a band saw and amputated their right index finger between the first and second joint.,0
Two employees were arguing over a method to fix an overhead garage door. Employee 1 lunged at Employee 2 with a box cutter. Employee 2 struck Employee 1 on the head with a cordless impact wrench. Employee 2 was rendered unconscious and was hospitalized with a head injury.,1
An employee was hit in the head while racking and was hospitalized with a head injury.,1
"An employee was cleaning a light fixture and pipe on a 12-foot A-frame ladder near an entryway with an automatic upward sliding door. The door was activated, opened upward and knocked the employee off the ladder. He fractured his left shoulder and neck.",1
"An employee was operating a scissor lift, traveling down a ramp in a parking garage. The lift started slipping due to the flooring conditions and a 9-degree grade. The scissor lift slid until it hit a curb at the bottom of the parking garage. When the lift hit the curb it stopped and the employee was ejected onto the concrete floor. The employee sustained 4-5 broken ribs, a fractured tail bone, a contusion to the right side of his head, and a lacerated liver.",1
"An employee was power washing the top shed of the shakers approximately 8 feet above the lower level. As he was transferring to the ladder to leave the shed top, he fell and struck his head on the tank's metal grating. The employee suffered a torn muscle in the neck and a concussion.",1
An employee received an electrical shock and burns while securing the power cable to the tower crane.,1
An employee walked through an area of wet carpet and then stepped onto a tiled area and slipped. The employee fell and broke her wrist.,1
"An employee was setting up a board over a 3-foot deep excavation so that he could access the control valve to stop a leak. The employee fell into the excavation that was filled with hot water and suffered burns to the feet, leg and knee.",1
"An employee was moving straws from one side to the other of a hopper when the employee's hand slipped into the conveyor, resulting in a right middle finger amputation.",0
An employee placed a customer's car onto an automotive lift to check the wheel bearings. The employee manually spun the wheel to emulate movement in order to hear if the wheel bearing was bad. While the wheel was spinning the employee's left index finger was caught between the wheel and the brake rotor amputating the finger to the first knuckle.,0
An employee was helping to set up a tent for an event and was holding a metal pole. A strong electrical current struck the metal pole due to a lighting strike. The injured employee had pain in his right arm.,1
An employee was servicing a re-grinder and amputated four fingers.,0
"An employee had been connecting/disconnecting air lines from his yard spotter truck to the trailer. When the employee was stepping down from the spotter truck, he slipped and fell to the ground sustaining fractured ribs and a punctured lung.",1
"An employee was working on a ladder approximately 45 inches high when his wrench slipped, causing him to fall off the ladder to the ground. He suffered fractured ribs.",1
"An employee slipped on a plastic wet floor sign that was lying on the floor when she walked through a back door and jammed her leg into the door, sustaining a left leg injury.",1
"An employee was making a key way in a concrete platform when he stepped on a 3 X 4 bracing that gave way. He then fell about 24 feet to the next 3 X 4 bracing and broke eight ribs, requiring hospitalization.",1
"An employee was watering plants in the garden center when she tripped over the hose and fell to the floor, breaking her right femur and requiring hospitalization.",1
"An employee was walking down stairs, missed a step and fell fracturing the right hip.",1
"An employee was struck by a golf cart while he was filling in divots on a golf course tee hole. He suffered a fractured nose, cut lip, and scrapes.",1
"On May 13, 2019, the injured employee was performing demo work with a pry bar in one hand while his other hand was leaning against a door jam. Another employee closed the door causing and pinched the injured employee's finger between the door and the door frame resulting in a fingertip amputation.",0
"An employee was loading a pallet of milk on a trailer. His pallet jack fork hit a piece of wood that had broken off from a pallet he had just loaded, causing the milk to start to tip over. The employee dismounted the pallet jack and tried to stop the pallet from falling. His finger was pinched between the falling pallet of milk and the side of the trailer, resulting in a left middle fingertip amputation.",1
"An employee carrying a large filter and assembly from a warehouse area into a pump shop tripped and fell forward, cutting his right middle finger on the filter edge.",1
"An employee was standing on top of a string line when he lost his footing, twisted, and dislocated his hip.",1
"While operating a coupling machine, an employee got a laceration on her hand that required stitches and immediately started to have seizures. The employee was hospitalized.",1
"An employee was grinding a part on a grinding wheel when his finger came into contact with the grinding wheel, resulting in a de-gloving of his finger and bone loss.",0
"An employee was operating the manual side of a press stretcher (the tail side). He placed a block inside the channel of the aluminum extrusion and clamped it in the jaw end of the stretcher. When the employee noticed the block was out of alignment, he opened the jaw with his right hand and used his left hand to re-align the block. While he was re-aligning the block, the jaw handle slipped from his hand and closed on his finger. This occurred at the same time the head stretcher began pulling on the extrusion. 
The employee's left index finger was caught between the jaw and the extrusion. He pulled his hand back and lost his fingertip.",0
"An employee was picking up rigging shackles at the foundation base of a purposed cell tower. A climber on the tower had a tool pouch with a wrench that came loose off of his belt. The tool bag and metal wrench fell and struck the employee in the face, lacerating his upper lip and breaking his jaw and teeth.",1
An employee was using a scraper to clean debris from an asphalt paver when his safety vest became caught on the paver and he was pulled in toward the auger. He was hospitalized with second and third degree burns from the mid-torso to the armpit. The paver was running at the time of the incident.,1
An employee was operating a scrapper on the side of the road and began to feel unwell. He was hospitalized for heat stress.,1
"An employee was electric welding a goose neck trailer when the employee's shirt caught on fire from welding slag, causing second degree burns to the employee's torso and left arm.",1
An employee was removing a tube stand from under a piece of equipment when the tube dropped and partially amputated his left ring fingertip.,1
"An employee was starting to do work on a mobile scaffold when the scaffold fell over. The employee fell on a bench, suffering broken ribs and a collapsed lung.",1
"An employee fell and struck their head on the floor, requiring hospitalization.",1
"On May 13, 2019, an employee was asked to locate a motor in the storage room. About 20-30 minutes later a maintenance employee came into the storage room and found the injured employee leaning against a rack and bleeding. A ladder was found on the floor and the injured employee later said he had been on the ladder about 4 feet high. The employee was hospitalized with a skull fracture.",1
An employee was riding a horse looking for sick cattle when the horse was spooked and threw the employee off into a fence. He broke his jaw and was hospitalized.,1
An employee was moving a gurney past a mounted sink and pinched his right pinky finger between the gurney and the laminate support for the counter top resulting in a fingertip amputation.,1
An employee was hauling cardboard to a dumpster on an industrial forklift. He reached to open the gate while on the lift. The gate stopped when he was trying to drive through it and his hand was smashed and a finger was broken between the forklift and the gate.,1
An employee was selecting a grocery order using a double pallet truck. The employee's hand became caught between the handle bar of the pallet truck and a product pallet. The employee sustained an injury to the right thumb.,1
"An employee was operating a crane to lift a compressor and put shrink wrap around a flange. The load shifted, causing the compressor to strike him. He suffered a broken fibula and tibia.",1
"An employee was struck by a rail buggy while working on a gas pipe line, suffering a crushed ankle.",1
"An employee was cleaning a printing press with a rag when the press cycled and struck her right hand, amputating her right fifth digit at the first knuckle and fourth digit at the second knuckle.",0
"An employee was operating a stand-up forklift when he had a seizure, lost consciousness and slumped forward onto the steering handle. This caused the forklift to travel in reverse. The employee's left foot became pinned between the forklift and a trash can, which in turn was pinned against a guardrail post. The employee's left foot was amputated back to the heel.",0
"An employee was sliding a heavy piece of stone when it slipped down and pinched his left index finger between the stone and a meter cover on the ground. His left index finger was smashed, resulting in an amputation.",0
"An employee was using a hand saw to cut a piece of 1 x 6 fence picket when the saw cut his left middle finger, requiring hospitalization and surgery.",1
"An employee was pumping down an existing refrigeration line set in a mechanical room when there was a release of liquid refrigerant. While working to stop the release, the employee received burns to the right hand, requiring hospitalization.",1
"On May 13, 2019, at approximately 8:20 a.m., an employee was pumping anhydrous ammonia from bulk storage tanks into a 1000 gallon anhydrous ammonia mobile nurse tank. Ammonia released from the valve and burned the employee.",1
"An employee was removing a pin on the lift cylinder of a mini excavator when the cylinder fell. He tried to catch the cylinder and his right ring finger was crushed between the cylinder and the blade, causing a dislocation with an open wound.",1
"An employee was using a tool to clean film buildup off of a set of equipment leveler rollers. Once completed, the employee selected jog mode on the operator console to turn the leveler rollers and inspect if all of the film was removed. During the process of jogging the rollers forward, the employee's right hand was pulled into the leveler rollers causing a laceration to the palm.",1
"The injured employee was standing on a flat bed truck reading labels on parts to another employee who was on the ground. The injured employee put their foot on an interior support column weighing 826 pounds that was stacked four high and the stack shifted. The employee jumped to the ground and the column fell on top of him. The employee was hospitalized for broken ribs, a punctured lung, a punctured liver and internal bleeding.",1
An employee was using a chain come-a-long to move a boiler down the steps into a building. The neutral lever hit a solid surface and disengaged the come-a-long. As the chain began moving freely the employee's finger became caught in the sprocket of the come-a-long resulting in the amputation of the left ring finger.,0
An employee was walking through the facility near where flattened boxes were stacked when the boxes fell and knocked him down. He suffered broken bones in his leg.,1
An employee was operating a saw to cut a raw aluminum ingot. The employee's finger was smashed between the ingot and the saw table resulting in amputation of the left middle finger from the tip to the top knuckle.,0
An employee was reaching from one conveyor belt to the other  and fell over 12 feet onto the concrete floor. The employee suffered a concussion and broken bones.,1
An employee fell back and struck his head on the ground after a faulty control valve back fired.,1
An employee was working at the service desk when a customer brought in a leaking battery. The employee inhaled the off gassing from the battery and experienced respiratory discomfort.,1
An employee had an allergic reaction while installing stuffer blocks and was hospitalized.,1
An employee was cleaning a flo freezer. He was on the conveyor belts between two rakes and got caught by the rake behind him. The employee suffered a puncture wound to his left thigh and injury to a right knee ligament.,1
"On May 14, 2019, an employee exiting the cab of a semi truck when he fell and struck his head.",1
"An employee was carrying a large piece of sheet metal when it was dropped on his foot, causing an injury that resulted in a little toe amputation.",0
"An employee stood up to walk away from her desk when her foot became entangled in the computer cables under her desk/workstation, causing her to lose balance and fall to the floor. She extended her arms to break her fall and broke her left arm in two places.",1
An employee was removing a 48-inch x 8-foot long pipe from a machine when the employee's fingers were smashed between the pipe and an I-beam.,1
"On May 14, 2019, an employee was airing up a 14"" tire on a 14-1/2"" rim when the tire exploded. The employee suffered a broken and dislocated elbow and was hospitalized.",1
"An employee was performing a self rescue operation as part of his annual recertification as a tower climber. The employee attempted to lower himself to the ground using the release mechanism on his climbing equipment.  When he was approximately 8 feet off the ground, he fell to the ground and landed on his back, fracturing his vertebrae.",1
"An employee was struck by a forklift while walking toward the front of the building, suffering a right foot injury.",1
"An employee was using a telescoping radial miter saw to cut an aluminum angle extrusion when the saw kicked back, cutting the employee's right bicep.",1
"While driving a water delivery route, an employee felt unwell due to heat exposure. The employee was hospitalized for dehydration.",1
"An employee's hard hat slipped off of his head. He leaned forward to catch it and struck his eye on a smock rack. He was hospitalized with lacerations to the upper eyelid, lower eyelid, and tear duct.",1
"An employee was installing lights in a deli area from an 8-foot ladder when the ladder slipped and he fell to ground, fracturing both ankles.",1
"An employee was trying to find a gas leak on a heater that was returned by a customer. In order to test the fuel injector spray pattern, the employee pressed the start button. Fuel was expelled from the engine and caught fire. The employee's right arm was burned.",1
"On May 14, 2019, at 4:30 p.m., an employee was repairing an RV when the 6-ton jack stand failed, allowing the RV to fall. The employee's leg was caught under the RV, puncturing his upper right thigh and breaking his right lower leg. He was hospitalized.",1
"On 5/14/19 at 5:30 a.m., an employee was clearing a jam in a forming machine when the machine cycled and caught the employee's right arm in the machine. The employee suffered lacerations to the right forearm.",1
An employee was resetting crimp plates and caught her left ring finger in the crimper head when it recessed into the machine causing a partial amputation of the fingertip.,0
"An employee was checking oil on a loader. He went to shut the side engine panel/cowling when his right index finger was smashed in the hinge area of the panel, requiring surgical amputation of the bone.",0
"On 5/14/2019, an employee fell down stairs and fractured the right ankle, requiring hospitalization.",1
An employee was bending (stamping) a part when her hand entered the die. The die came down and caught her hand between it and the press. She suffered four broken fingers.,1
"An employee was stripping a wire at a job site when he lacerated his wrist or arm and went to get a bandage out of his truck. He then passed out and hit his head on the truck or ground, sustaining head injuries.",1
"On May 14, 2019, an employee was removing a temperature gauge from a piece of equipment when he was sprayed in the face with a chemical. He suffered chemical burns on his face and was hospitalized.",1
"An employee was struck by an electric pallet jack that lurched forward while he was loading his delivery truck, fracturing his right leg.",1
"An employee was putting parts into a machine when the employee's hand slipped on oil and was caught in a pinch point, resulting in a partial thumb tip amputation (no bone loss).",0
"An employee was operating a high-speed, automated robotic component saw. After running a series of parts through the saw, the employee rested his right hand on the lumber feed conveyor, which pinched his right index finger, resulting in a fingertip amputation.",1
"An employee was trying to nail a rafter while standing on a joist. He was stepping onto the wall and slipped, falling 10 to 12 feet to the ground. He suffered a fractured arm and back soreness.",1
"An employee was using a saw and feeding a piece of material into the saw when she attempted to fix material that became dislodged. Her right ring finger was pinched/crushed by the feeding mechanism, resulting in a fingertip amputation.",0
"An employee was parking a forklift by a charging station. When the employee stepped out, the employee's left foot was caught and broken between the forklift and a metal barrier.",1
"An employee was transitioning from a forklift platform to a roof when the employee fell approximately 18 feet from the roof to the ground, suffering a dislocated right wrist and a compression fracture in the back.",1
"An employee opened the swinging doors of a truck trailer. A pallet had shifted during the drive and fell out. The pallet hit his lower body, injuring both his knees. He was hospitalized and required surgery.",1
"An employee was using a chop saw to cut pieces of wood. He made a cut with the chop saw and moved back to his workstation with the piece of wood. He went to make an additional cut. The chop saw blade was still spinning from the previous cut when his left hand contacted the moving blade, causing a laceration between the index finger and the thumb.",1
An employee was attempting to rekindle a small fire with gasoline to burn scrap wood when the resulting fire burned the employee.,1
An employee was cutting vinyl on a saw when a piece of vinyl was caught. She removed her foot from the pedal and went to remove the caught material. The saw was reactivated via the foot pedal resulting in amputation of her left middle fingertip at the nail bed.,0
"An employee was processing cattle in the feed yard when his right little finger was pinched, resulting in a partial finger amputation.",0
"An employee's left hand was caught in the moving rollers of a rolling machine, crushing four fingers.",1
"An employee was pulling a pallet with a pallet jack when a forklift backed up over the employee's foot, crushing it.",1
"An employee was climbing a 20-foot ladder while transporting roofing materials when the ladder slipped and the employee fell, landing on an air conditioner unit and suffering broken ribs.",1
"An employee was operating a wood splitter machine. His left hand was in the point of operation when the machine was actuated via the foot pedal. The vertical knife blade contacted his left hand, resulting in a partial amputation of the left index finger and a severe laceration.",1
"An employee was opening the door to an asphalt truck when it exploded, causing burns to both arms and his chest, neck, and face.",1
"An employee was washing conveyor belts that run food into a chopper when the employee's rain coat sleeve became caught between the conveyor belt and the roller, resulting in a laceration to the left wrist/hand.",1
An employee had a reaction to an MMR vaccination; they had chest pains and an elevated heart rate.,1
An employee was operating a pasting line when several plates fell. The employee attempted to remove the plates from under the moving V-belt flattener and suffered a partial amputation to the right ring finger.,0
An overhead dock door fell and struck an employee on his head as he was rolling it down. He was hospitalized with a cervical strain.,1
"An employee was working under a platform when a piece of slag fell off the furnace, hitting him in the hard hat and knocking him into a 2.5-foot pit. He suffered injuries to his scalp and a fractured leg.",1
"On 5/15/2019 at approximately 8:00 p.m. an employee was using an acetylene torch to cut the top off of a 15-gallon, metal drum. The drum's last contents were highly flammable and the drum exploded as the employee was cutting the top. The employee sustained a head injury.",1
An employee was on the third floor decking and reached down to pick up his gloves and fell to the second floor decking injuring his chest and back.,1
"An employee was working on an extruding machine when an arc blast occurred. The employee sustained burns to his face, ears, neck, chest and arms.",1
An employee was involved in an altercation with a shoplifter and was hospitalized.,1
Two employees were carrying rebar. One employee lost balance and fell onto a stack of rebar fracturing their left leg.,1
An employee was tracking a group through brush country and was bitten by a rattlesnake.,1
"An employee was operating a forklift to load a box truck when the truck moved away from the loading dock, causing the forklift to fall to the ground. The employee sustained a knee injury.",1
"An employee fell to the ground and fractured her right hip, requiring hospitalization.",1
"An employee was unjamming a cable splitting machine when his left hand was caught inside the machine, resulting in a severe laceration to the thumbs and partial amputations to the tips of his index and middle fingers.",1
"As a bundle of steel was being lowered by an overhead crane, it shifted and pinched an employee's left middle finger. The tip was amputated.",0
"An employee's hand was crushed in a 32-ton press, amputating four fingertips.",1
An employee fell off a ladder to the ground and broke a leg.,1
"Employees were performing maintenance on a fertilizer truck loading arm when the spring tensioner released, allowing the arm to drop and strike an employee who was offering guidance and observing the work. The employee was struck on the head and knocked down.",1
An employee was using a sponge to remove dried ink from a press ink pan when the employee's right hand and arm were caught by a rotating cylinder that was near the ink pan. The machine was operating at the time.,1
"An employee was attacked and bitten on the finger by a dog while delivering mail, resulting in a possible amputation of the pinky finger.",1
An employee was using abrasive blasting equipment as part of the fabrication process for a steel tubular rack. The employee's left hand suffered an abrasion that required hospitalization after it was struck by the blasting media.,1
An employee was rigging and walking around a construction site when he became ill and required hospitalization for heat exhaustion.,1
"An employee was pushing a rack when she tripped and fell into the rack, striking her arm on a roller and fracturing her elbow.",1
The injured employee transported chemicals to a field location. A second employee was operating an applicator and drove up to receive the chemicals. The injured employee hooked up the hoses to the applicator. The applicator dropped the spraying arms down and they contacted a power line. The injured employee was shocked and hospitalized for burns to a hand and foot and amputation of the lower left arm.,1
An employee was riding a bicycle on the flight line apron headed to a building when the employee was struck by the trailing edge of a B-1 stabilizer on a parked trailer. The employee suffered facial fractures and lacerations.,1
An employee suffered the amputation of the right middle fingertip while installing a chain over a drive gear sprocket on the ribbon blender.,0
An employee was driving a utility terrain vehicle (UTV) and struck some 4-inch PVC pipes laying on the ground. The employee lost control of UTV and as he was about to be ejected he grabbed the rear view mirror causing it to break and lacerate his left index and middle fingers.,1
An employee was preparing to install a wiring harness to the base of an outside air conditioning unit that was being manufactured. The base of the unit contained the compressor and two sets of wires. One set of wires had fallen below and was caught in a section of rotating chain and sprocket on the conveyor. The employee attempted to remove the wires and both of her hands were caught between the chain and sprocket. Both middle fingertips were amputated.,0
"An employee was lifting a 5,000-pound steel plate with a small ground hoist that was rated for 7,500 pounds. The plate suddenly lowered down onto the employee's lower leg, causing him to fall to the ground. The plate rested on the side of his right foot, resulting in two bone fractures. He was hospitalized and had surgery.",1
An employee was in an aerial lift installing a section of angle iron for the installation of a new elevated walkway at a tank farm. There was a pipe racking system located behind the aerial lift's basket. When the employee retracted the lift basket it retracted into the racking system and the employee was caught between the lift's controls and the fixed racking system. The employee lost consciousness and sustained chest bruising.,1
An employee was sweeping grain and got caught in the drag chain conveyor after stepping into an opening in the walking surface. The employee suffered the surgical amputation of three toes on the left foot.,0
"An employee was pulling out a marble slab when the slab leaned on the employee's head, causing a head injury.",1
An employee was loading a rear load container to dump into the back of a garbage truck when the container shifted and smashed the employee's fingers. The employee fractured multiple fingers and received a severe laceration to the middle finger.,1
An employee was polishing a rod using an emery cloth and a lathe. The employee's left hand was caught in the lathe resulting in a fractured wrist.,1
An employee was rotating a crane when the crane tipped over. The employee jumped off the crane and fractured a leg upon impact with the ground.,1
"An employee was walking on metal grate flooring above a chemical tank and fell through a section of the grate. His right foot was submerged in the chemical mixture that was heated to 160 degrees, and caused second degree burns half way up his shin.",1
Two employees were welding pipe when the 9x9 steel welding hut blew over due to a microburst. One employee was hospitalized for a fractured leg and hip.,1
"An employee was assisting in the laundry room when the door slammed on his right index finger, resulting in an amputation above the first knuckle.",0
An employee was loading a truck with the assistance of a power conveyor belt. The employee was struck by two boxes that fell on him while he was stacking the boxes.,1
An employee was troubleshooting a rotary furnace and caught their left index finger in a pulley under the furnace. The fingertip was amputated.,0
"An employee opened a container with dichloroacetyl chloride residue, which is acidic. When the container was opened, tank pressure was released and some product discharged onto the employee. The product got on his back, the side of his body, and his face. He suffered first degree burns and irritation to the body and face, and was hospitalized for redness/irritation to his eyes. Safety glasses were worn at the time.",1
An employee was cutting chicken wings with a circular saw when the saw amputated her left index finger distal to the third knuckle.,0
"An employee was operating a press brake machine and making an adjustment. Her left middle finger was caught in the point of operation, amputating it at the first knuckle.",0
"While using a hand held 1/4"" drill the injured employee's glove became entangled in the rotary file bit resulting in the amputation of a fingertip.",0
"An employee was cleaning a roller during the recoil process when the employee's right hand was caught in the roller, suffering a broken bone and laceration.",1
"An employee was carrying auto parts inside the store, tripped over a cart, and fell breaking the left hip.",1
Two employees were tightening a belt on a conveyor while standing on a platform on a flatbed truck. The platform slipped down off the truck and both employees fell off the truck bed. The first employee sustained right-side stomach abrasions. The second employee fractured four ribs and was hospitalized.,1
While working on a platform lift installing electric service an employee was electrically shocked. The employee then fell 18 feet from the lift to the ground and suffered a broken ankle.,1
An employee was working on a weakened power pole from a ladder. The pole snapped and the employee fell to the ground resulting in a fractured jaw.,1
"An employee was helping a mechanic install a boom on a pipelayer. They were trying to pin the block when the block caught the employee's left pinky finger between the boom and the block, resulting in a finger amputation behind the nail.",0
"An employee was addressing an alignment issue with the metal trim at the end of the conveyor. After making the adjustment, the employee's right hand was caught in the moving conveyor belt. The employee's pinky finger was fractured and dislocated. The employee also sustained a laceration from the mid-pinky to the middle of his right palm.",1
"An employee was placing tools and equipment in a line truck when he slipped on the steps at a height of 2 to 3 feet and fell to the gravel ground, injuring his back.",1
An employee was performing roofing construction and fell through a skylight fracturing a hip and leg.,1
"An employee was cleaning a large bearing in a wash tank. The employee fell backwards with the bearing and landed on concrete. The employee suffered head trauma, a broken right forearm and lacerations.",1
An employee was using a fire extinguisher on the brake area of his semi-trailer when a tire exploded causing burns to his neck and left hand along with debris in his left eye.,1
An employee was picking up a 30lbs. case of turkeys and suffered a torn muscle.,1
"An electrician was in an elevated bucket truck utilizing a tie wire to tie a conductor. A live power line above the employee's head contacted his body and generated an arc flash. The employee suffered burns on his face, mid torso and his abdomen.",1
"An employee was attempting to enter a semi-trailer, lost balance and fell backwards off the step approximately 18 inches to the concrete ground. The employee suffered a right hip fracture that required hospitalization.",1
The employee stepped onto the sweeper and fell to the tile floor breaking a hip.,1
"An employee was on a manlift changing light bulbs. Rail cars were being moved and the employee felt like the rail car was going to hit the lift therefore, he jumped approximately 10 to 12 feet to the ground resulting in a fractured left arm and a fractured right leg and ankle.",1
An employee was involved in a mock exercise for a hostage situation when an impact grenade detonated close to her. She suffered tissue damage to the left calf area.,1
"An employee was dragging a stack of I-beams using a chain and a forklift. The chain snapped and hit the employee in the jaw, breaking it and requiring surgery.",1
"An employee was operating an 18-inch wood chipper with a winch attachment. The employee had tied a piece of wood to the machine's winch and a piece of excess rope from the winch was wrapped around his leg. As the machine began feeding the piece of wood into the chipper, the employee's leg was yanked towards the machine. The employee was able to engage a safety mechanism that stopped the chipper before his leg reached the chipper wheel. The employee was hospitalized for a fractured pelvis and other injuries.",1
"An employee was using a pry bar to shift a water line over to connect it to the existing line. When he ran the pry bar into the ground, he struck a 15,000-volt electrical line, resulting in shock and burn injuries.",1
"An employee was checking a wheel bearing noise by spinning the tire and listening with a stethoscope when his right hand slipped into the rim and it caught his fingertip. As a result, he suffered an amputation to the right index finger from below the nail to the top of the first knuckle.",0
"An employee was working at a pug mill, loading clay chunks into a wad mill and offloading pugs that came off the wad mill. An extrusion plate, which pushed chunks of clay off a push cart, pinned the employee's left leg against the push cart, causing injuries and fractures to the leg.",1
A maintenance team member was walking down a set of stairs. He was holding the rail with one hand and was holding a tool bag in the other hand. He lost his balance and slipped on the last couple of stairs. As he attempted to catch himself he landed hard on his foot and felt pain in his knee. He was hospitalized for a tear in the tendon that stabilizes the knee cap.,1
"An employee was loading/unloading a delivery truck when the employee's right toe was pinched by the lift gate, requiring hospitalization.",1
An employee was replacing an adjustment pin on a tail bearing and amputated the left middle finger.,0
A crane operator was closing the crane door and pinched his left thumb between the door and the door frame.,1
An employee was working from a ladder when he fell approximately 7 feet to the concrete floor and suffered a shoulder injury. He was hospitalized.,1
"An employee was changing out a propane tank. As the employee tightened a fitting on the tank, propane leaked out and contacted the employee's right hand resulting in cold burns to three fingers.",1
An employee tripped on an electrical cord and fell striking their face on a medication cart. The employee suffered a dislocated right shoulder and a fractured right patella.,1
"An employee fell from a small 4-step ladder to the floor in a store meat cooler, suffering a skull fracture. He was hospitalized.",1
"An employee fell down one to two carpeted steps in the chapel and suffered a brain bleed, a left shoulder fracture and a black left eye. The employee was hospitalized.",1
An employee was troubleshooting a noise that was coming from a machine. The machine started and the employee's left index finger was caught in the chain and sprocket resulting in amputation of the fingertip.,0
An employee was in a scissor lift approximately 22 feet in the air attaching a gutter to the hopper. The crane pendant dropped into the gutter. The crane began to move dislodging the gutter and it swung out and struck the scissor lift knocking it over. The employee was hospitalized for a fractured hip and a contusion to the skull.,1
The injured employee was rigging up a component of a very large transformer to remove it by lifting it off the main transformer body using an all terrain telescoping forklift. The employee was positioned on top of the transformer completing the rigging with lifting hooks when the forklift operator accidentally bumped the joystick causing the boom to drop and catch the injured employee's right arm between the boom and a metal beam. The employee suffered broken bones in the right arm.,1
"An employee was walking in the building when the employee tripped and fell on carpet, fracturing the left hip.",1
An employee was operating an electric power jack in an aisle and lost control of the jack when it went through a milk spill on the floor. The operator jumped off the jack and was pinned between the jack and pallet racking. The employee sustained a compound fracture to his lower leg/ankle.,1
"An employee was unloading a truck and placing metal rods onto a cantilever rack with the aid of a hoist. A metal rod dislodged from the rack, fell, and struck the employee on the back. The employee suffered a fractured back bone and was hospitalized.",1
"An employee was operating a drill press to drill holes on a door frame. As the employee was holding a piece of the material, the glove on his right hand got caught in the drill. The force of the glove being twisted severed his right index finger at the first knuckle.",0
An employee fell four to five feet off the ramp of a ramp truck and landed on his back. The employee was hospitalized for a partially collapsed lung.,1
An employee was collapsing an empty wire display bin and amputated the tip of her right middle finger near the first joint.,0
"An employee was going to step up on an 11- to 12-inch rail to measure a piece of steel when he slipped off and fell, injuring his hip.",1
An employee was using a toe kick saw to cut flooring when it struck a nail and kicked back. The employee's fingers were caught in the blade resulting in amputation of his right index finger.,0
"An employee was working from a fiberglass ladder to install an electrical conductor on a 120v circuit when he received an electrical shock, became startled, dismounted the ladder, and fell on the concrete floor. He fractured his hip and pelvis. The power to the conductor was not shut off at the time of the incident.",1
"Two employees were operating remote-controlled guillotine concrete breakers. The breakers have steel plates that come down and break the roadway concrete for removal. The injured employee's breaker was not operating and he got between the two units. When the second unit moved, the injured employee was pinned between the two breaker units resulting in a fractured left fibula.",1
An employee was leaving the building for the day and jumped off the loading dock to the paved parking lot. The employee fell and broke a hip.,1
"An employee was attempting to place a bundle of conduit on a rack. The employee was stepping on another bundle of conduit when that bundle shifted and caused the employee to fall to the ground, fracturing his pelvis, hip, and tailbone and injuring his shoulder.",1
"An employee was walking into the bar area when the employee slipped and fell on the wet floor that had just been mopped, suffering a broken left hip.",1
"An employee was operating a drill press, drilling a hole in a piece of plywood, when his gloved right ring finger was caught in the rotating drill bit, causing an amputation.",1
"The injured employee was acting as a spotter in the parking lot for a lift operator that was loading a pallet of mulch into a customer's vehicle. The lift operator was positioning the load when the pallet of mulch shifted, toppled over, and struck the injured employee on the shoulder, knocking him to the ground. The employee struck his head on the pavement and was hospitalized for head trauma.",1
An employee was centering product on a roller bed when their finger was crushed between the roller bed and a rail lift. The employee sustained the amputation of the left index fingertip.,0
"The injured employee was washing out a 55-gallon barrel with a hose next to the U-drain. The U-drain screen was clogged so another employee removed one grate to remove the clog. The injured employee was about one foot from the U-drain washing the barrel and stepped into the unguarded drain. The U-drain was about 10 feet in length, 16 inches wide and about 3 feet deep and had hot water in it. The injured employee suffered second degree burns to the leg, waist and stomach.",1
An employee was lifting chairs when he experienced pain in his back from a bulging disc.,1
An employee was sitting at the light station inspecting glass containers and noticed a piece of metal equipment from the forming department on the line. The employee was removing it from the line when the metal snagged her glove and amputated her left pinky finger.,0
"An employee was moving behind a structure that was being installed when an I-beam dislodged, rotated, and fell, striking the employee's head and arms.",1
An employee was threading the pulp sheet machine when their left hand was caught in a pinch point resulting in a fractured hand and wrist.,1
An employee was operating a forklift and navigating around a metal container. His left arm was severely lacerated when it was pinned between the forklift and the container.,1
An employee was entering the back of a truck to load a handcart when the truck pulled away from the loading dock and the employee fell four feet to the concrete parking lot resulting in a head injury.,1
"The employee was verifying a tag on a stainless steel coil. The employee took the coil out and set it on the floor. The crane adjusted weight on the floor and the coil rolled back towards the employee, hitting the employee and fracturing their pelvis.",1
"An employee was on a ladder spraying water on a conveyor line when the employee lost balance and fell 2 feet onto the moving conveyor, suffering a broken arm.",1
An employee was positioning two concrete form panels (8 ft. x 30 in.) when their left pinky finger was caught between the two panels and crushed as the forklift moved the panels together.,1
"An employee was bending down to get something from a bottom counter when the employee's eye hit a metal bag holder, causing an eye injury.",1
"An employee was helping a patient use the toilet when the patient lost grip and started to fall. The injured employee grabbed the patient to keep her from falling. The force required to lift and hold the patient caused the employee's pre-existing hernia to be aggravated, resulting in hospitalization.",1
An employee's gloved finger was caught while aligning a swivel causing a fingertip amputation.,0
"An employee was unloading product from the back of a tractor trailer. While coming down the ramp with a two-wheeled hand cart, the employee's foot slipped and he fell off the ramp. The hand cart then fell on top of him lacerating his ankle and crushing his heel.",1
"An employee was working from a ladder cutting an old pipe. When the pipe was completely cut through, it fell and struck the ladder, knocking the employee to the floor. He broke his femur and was hospitalized.",1
"An employee was prepping deli sandwiches, tripped over a box on the floor, fell and was hospitalized for a hip injury.",1
An employee was straightening the file after making a film change on a bagger machine when the clamp that seals each end of the product bag amputated the employee's left middle fingertip.,0
"An employee was moving a 55-gallon drum from a pallet onto a hand truck. The employee's left hand was smashed between two of the 55-gallon drums, causing an amputation to the tip of the middle finger.",0
An employee was erecting a scaffold and fell approximately eight feet to the ground when a plank broke. The employee suffered a chipped bone in his shoulder.,1
A maintenance employee was using a fly mower and ran over his left foot resulting in amputation of two toes.,1
"While chasing a shoplifter out of a store, an employee fell and suffered a knee injury.",1
"An employee had climbed a ladder and unsecured the top of the ladder from the building so that it could be lowered when he fell from the ladder to the ground below fracturing a hip, ankle and heel.",1
"An employee fell from the deck of a front-end loader to the ground below, sustaining a hairline skull fracture.",1
An employee was training another employee on how to clean the shake machine when the shake machine expelled excess cleaning solution onto an electrical outlet. The employee unplugged the shake machine's cord from the outlet and was shocked.,1
"An employee was walking, tripped over the edge of a broken floor tile and fell breaking her left wrist.",1
"An employee tripped while pulling carts and landed on the ground, injuring the left shoulder.",1
"An employee was installing roof decking and fell approximately 20 feet through the roof, landing on the practice gym floor. The employee sustained fractures to both legs that required hospitalization.",1
"On 5/20/2019, at 1:00 PM, an employee was training on a stand-up forklift and pinned his left ankle between the forklift and a pallet. The employee's ankle was fractured.",1
"The injured employee was spotting a truck while it backed up. The employee slipped on fresh snow and his legs went under the rear passenger-side, dual truck tires resulting in a muscle injury to the lower left leg.",1
An employee was setting up form work for concrete and was struck in the left eye by a tie bar.,1
A letter carrier was delivering mail to a residence and was bitten by a dog. The employee sustained severe lacerations to the right hand and middle finger and the lower right leg.,1
An employee in the wood department lacerated three fingers while cutting wood on a table saw. The employee was hospitalized.,1
"An employee tried to sit on a tall, wheeled lab chair. She slipped off the seat, pushing the chair back and fell backwards against a lab refrigerator and hit her head. The employee was hospitalized for a head injury.",1
"Tri-axle dump trucks were importing stone to the worksite. After one of the trucks emptied its load the injured employee noticed stone on the tail of the body where the tailgate would close. The employee notified the driver who, again, raised and lowered the bed of the tri-axle to dislodge the debris. When the bed lowered the employee's left hand was caught in a pinch point between the truck body and the tailgate resulting in amputation of the middle and ring fingertips.",1
An employee had entered a forging press to make adjustments. The employee was stepping down from a step stool when he slipped and fell to the ground striking his jaw on the concrete floor. The employee was hospitalized for surgery on his jaw.,1
"An employee was on a ladder reaching for a metal basket on a shelf when the employee fell to the concrete floor, suffering a head injury and broken ribs. The employee was hospitalized.",1
"On May 20, 2019, an employee was pushing a semi-truck to be placed onto a jack stand and slipped. The truck rolled over his left leg and fractured it. The employee also sustained a bruised right leg.",1
An employee was sorting a truck/warehouse delivery. Totes are stacked 7 high x 2 on dollies with wheels. She was reaching for a top tote when either a tote fell and hit her on the head or she fell and hit her head. She was hospitalized with head trauma.,1
"An employee felt dizzy and lightheaded while working in the black oxide room with chemicals. The employee was hospitalized with chemical burns to the lungs, chemical irritation, and skin blisters.",1
"An employee was placing broken glass into a hopper when the glass hit another piece of glass, which then struck the employee. The employee suffered a severe laceration to the lower forearm.",1
An employee was loading a log onto a log splitter when the splitter was engaged and amputated the employee's right thumb.,0
"A temporary worker was operating a motorized pallet jack to move pallets. While in reverse, the employee dismounted the lift and pinned his right leg between the lift and a support beam. The right leg was fractured.",1
"A diver was underwater cutting steel floor beams from an anchor span truss when the anchor span moved and pinched his hand between the previously cut lateral beam and the truss. The employee was trapped for a few minutes until the steel structures moved and released him, allowing him to surface. He suffered a right ring finger and pinky fingertip amputation, as well as a right middle finger laceration.",1
An employee was driving a utility terrain vehicle (UTV) to close the worksite gates. The UTV overturned and the employee was ejected from the vehicle. The employee suffered a broken nose.,1
"An employee was fixing a garage door from an extension ladder when the employee fell approximately 14 feet to the ground, suffering wrist, ankle, and rib fractures.",1
"An employee was moving product with a cart. An empty cart was positioned next to a full cart. As the employee was positioning his cart next to the empty cart, he pinched his left pinky finger between the carts causing a fingertip amputation.",0
An employee stepped off a curb and fell fracturing the left ankle and tibia.,1
"On 5/20/2019, at 8:00 AM, an employee suffered a spiral fracture to his tibia and fibula while turning around.",1
An employee was using an air gun to remove paper from a cylinder. The air gun struck their left hand causing a laceration and compressed air was injected into their left arm. The employee was hospitalized that evening with pneumomediastinum and subcutaneous emphysema in the left chest wall and neck.,1
An employee was compacting cardboard and crushed their left ring and pinky fingers in the compactor's safety gate.,1
An employee on the cleaning crew was struck from behind by a forklift and suffered broken ribs.,1
"An employee was unloading equipment from a flatbed trailer, lost his footing and fell less than 4 feet off the side of the trailer to the ground. The employee shattered his elbow and was hospitalized.",1
"On 5/20/2019, at approximately 10:00 a.m., an employee was helping another employee unload a large cylindrical item off of a trailer bed using nylon straps/slings. The object began to fall on one end, which pulled on the sling the first employee had wrapped around his arm. The force of the falling object caused the first employee to be pulled off of the ground, and he started to be pulled up and over the flatbed. His foot became caught on a gate, and his right femur became a fulcrum and was fractured.",1
"An employee was helping to unload a steel pipe (10""x40' / 2850 lbs.) from a truck. The pipe was lowered onto 4x4s when it rolled forward, jumped the chock, and rolled over the employee. The employee was hospitalized with a broken right leg, three cracked ribs, and a broken collarbone.",1
An employee was positioning a piece of steel in a band saw's pneumatically powered clamp mechanism to hold the sample for cutting when his right thumb distal tip was caught in the clamp. He suffered a partial amputation of the thumb tissue under the nail.,0
An employee was sanding a chock on a belt sander when their right middle finger was caught in the belt resulting in a partial amputation.,0
An employee was troubleshooting an air conveyance system when his left hand was struck by the spinning paddles resulting in amputation of the left index finger and part of the left thumb just below the nail.,0
"An employee was palletizing finish good products. When he turned towards the pallet while holding a package, he tripped on the corner of the pallet and fell to the floor resulting in fractured ribs.",1
"On 5-20-2019, at approximately 11:30 AM, an employee was attempting to stand up in the bathroom when he slipped on water and hit his head against the sink. He suffered blunt force trauma to the head.",1
"An employee was on a ladder troubleshooting a faulty CO2 sensor. As she was removing the existing mounting bracket, a hot water pipe became dislodged due to corrosion and sprayed her with hot water, causing her to dismount the ladder and fall on the floor. She suffered hot water burns on her upper and lower back and left ribs, as well as bruises from the fall.",1
An employee was operating a stand-up forklift when their left foot slipped off the compartment and was run over by the lift wheel smashing the big toe and the two toes next to it. The employee was hospitalized.,1
A roofing employee fell 10 feet from a roof and was hospitalized for a back injury.,1
An temporary employee was working on the sanitation crew cleaning a meat grinder when his right hand was caught in the grinding aperture. The employee's hand was amputated.,0
An employee was adjusting the pouch line machine and amputated his right ring finger just below the first knuckle.,1
An employee was operating an alligator shear and amputated his right thumb tip.,0
A temporary employee was attaching a dump door pan to a spreader bar using a hydraulic fastening gun. The employee's right index finger was caught and crushed between the spreader bar and the trigger of the gun. The employee was hospitalized.,1
An employee slipped and fell off a utility truck while loading a drain pipe. The employee's head struck the concrete floor.,1
"An employee was working in the field where a tornado had destroyed 4 to 5 substructures. The employee was marking lines with tape when a wire was freed and sprung up, striking and injuring the employee's back.",1
"An employee was walking, tripped over an anchored stop plate for equipment and fell breaking their left femur.",1
An employee received a fingertip amputation while pushing meat through a blade after it was shut down.,0
An employee was cutting pipe on a portable band saw and lacerated his left index finger. The finger was surgically amputated at the first knuckle.,0
"A temporary employee was feeding film into a pancake line machine when his right hand was caught on the cutting head, resulting in a middle fingertip amputation. The machine was guarded at the time.",0
"An employee was operating a forklift in the warehouse. He turned abruptly to avoid another forklift, got off balance and jumped off the forklift. His left foot was caught between the corner rack guard and the forklift and fractured.",1
An employee loaded plants onto a trailer wagon. The trailer was being moved to another section and the employee was walking behind the trailer. The trailer wagon was being pulled by another empty trailer in the same driveway. The employee thought the loaded trailer was going to contact the empty one and put his hand between the two trailers resulting in a partial amputation of the right index finger.,1
An employee was removing the headpin from a high load scaffold (shoring system) when it fell on his left ring finger resulting in an open fracture and partial amputation.,0
"An employee was leaving the facility when the employee slipped and fell on a wet floor, injuring the left knee.",1
"An employee was exiting the office space via the rear door when a wind gust pushed a door mat up, causing her to trip on the mat and impact the ground. She fractured her left femur.",1
Two employees were on the roof of the Scooters ride installing the top canvas. One of the employees was on a catwalk. The two employees were pulling on the canvas in opposite directions to straighten it out when one employee unexpectedly let go of the canvas causing the other employee to lose his balance and fall backwards approximately 10 feet off the roof to the ground. The employee was hospitalized with a broken leg immediately below the knee.,1
"An employee was sanding/deburring the edge of an S-hook part against a sanding belt when the S-hook's open end slipped over the edge of the sanding belt drive wheel, pinching the employee's hands between the S-hook and the sanding belt's lower guard. His right middle finger was lacerated, requiring hospitalization.",1
"An employee was walking down the steps between the second and third floor, missed a step and fell. The employee hit his head during the fall down the stairs and again at the bottom of the stairs against the marble baseboard. He briefly lost consciousness while waiting for the paramedics. The employee was hospitalized for a fractured vertebra in his neck and a laceration on his forehead.",1
An employee tried to catch a discharge head. It slipped while he tried to catch it and pinched his finger between the strap and the discharge head causing a laceration.,1
"Two employees were in the dock area and walking towards the parking lot. One employee climbed over a railing to take a short cut and the railing gave way and fell on both employees. One employee was hospitalized for traumatic injury to the neck, shoulder and foot.",1
"An employee was shutting a garage door while carrying supplies when the employee's little finger was caught between door panels, resulting in a smashed finger and a possible amputation.",0
"An employee was unloading packages on a trailer's lift gate when the employee mis-stepped and fell to the ground, suffering broken ribs and a punctured lung. The employee was hospitalized.",1
An employee performing plastering activities fell 20 feet from a scaffold and was hospitalized.,1
"An employee walking on the job site slipped on a piece of cardboard and impacted the ground, fracturing his hip.",1
An employee was cutting meat using a band saw and lacerated a tendon on the right third finger.,1
"An employee was flipping the ""boom strip"" from a horizontal position to a vertical position with a flipper bar when the tool slipped causing the ""boom strip"" to shift and strike the employee's left leg. The employee suffered a fractured and dislocated left ankle.",1
An employee was handling 6-inch PVC piping from a dewatering system that was full of water and heavy while trying to connect it to a pump. The pipe fell onto another pipe and the employee's right ring finger was pinched between the two pipes causing a partial amputation.,0
Maintenance employees were moving a catwalk with a forklift. The catwalk fell off the forks and struck the legs of one of the maintenance employees. The employee suffered broken bones in both legs.,1
An employee was doing routine maintenance (replacing worn belts) on a bag sealing machine when his left hand was caught in the machine. The employee's hand was crushed and burned and a fingertip was amputated. The machine was not locked out at the time of the incident.,1
"An employee was working to unjam a press brake when the paddle was hit, turning the machine on. The press brake then partially amputated the employee's left thumb.",0
An employee was removing excess dough around the cutter of a dough machine when the cutter partially amputated the employee's left index and middle fingers. The cutter was unguarded at the time of the incident.,0
An employee was visually checking a conveyor system located outside. The employee slipped and fell and amputated their right index fingertip.,1
An employee was dismantling a shore tower at a construction site. The shore tower tipped over and struck the employee causing a compound fracture to the lower left leg.,1
An employee was cleaning out a 1-inch diameter pipe that feeds organic peroxide catalyst into a mixing bucket. A pneumatic valve closed on the employee's right pinky finger and amputated half an inch from the tip of the finger.,0
"A temporary employee was operating a standup reach forklift when the forklift slid and struck a pole. His left leg was pinned between the lift and the pole resulting in multiple fractures to the left foot, three fractured toes and an open fracture on top of his foot.",1
An employee was struck by a forklift and hospitalized with fractures and a laceration.,1
An employee was struck by a reversing forklift and was hospitalized for a leg fracture.,1
"An employee was checking the power and ground at the pigtail of a vehicle's AC compressor when his right hand contacted the serpentine belt, causing a laceration to his hand and fingers. He was hospitalized.",1
An employee fell two to three feet from the elevated platform of a powered stock lifter onto the floor resulting in a hip fracture. He was hospitalized.,1
"An employee was climbing up a 24-foot extension ladder to paint the top portion of a building when the ladder slid backwards, causing him to fall on the concrete floor. He suffered fractured ribs and a fractured skull, as well as a broken back.",1
An employee was climbing a ladder placed on soil when the ladder shifted. The employee fell 3 to 5 feet to concrete ground and suffered a concussion.,1
"An employee was walking through the aisle, tripped over boxes and fell striking their head on the floor. The employee was hospitalized with swelling and bleeding in the brain.",1
An employee was hospitalized with a broken lower left leg after being struck by a forklift.,1
"An employee was setting steel channels on a layout line when the employee's right middle finger was pinched between a channel and a steel plate, resulting in a finger amputation.",1
"An employee was spotting for a forklift operated by a coworker. The employee attempted to pick up debris behind the forklift and was struck by the forklift, suffering a left tibia fracture. The employee was hospitalized.",1
An employee was working on a ladder when a forklift struck the ladder causing the employee to fall and fracture the left wrist.,1
"An employee was walking in the storage yard, tripped and fell to the ground. The employee was hospitalized with head and neck injuries.",1
An employee was hoisting loads. The load swung and the employee's hand was pinched between two loads. A finger was crushed and required surgery.,1
"An employee was cleaning out the fuel additive bucket at the gas pumps when a customer's vehicle struck the employee. The employee was hospitalized with fracture ribs, facial injuries and a lacerated liver.",1
An employee was cleaning around a belt guard for a shaker motor and amputated her left index fingertip and left thumb tip in the belt and pulley.,0
"An employee was turning on a breaker on a disconnect box when an arc flash occurred, causing burns to the employee's left hand and face.",1
An employee slipped and fell to the floor while attending a meeting at a restaurant. The employee was hospitalized for a fractured right hip.,1
"An employee was injured during a  filter change when the filter caught fire. The employee was hospitalized with first and second degree burns to the hands, neck and face.",1
"An employee fell to the ground while walking across a parking lot, suffering a broken right leg.",1
"An employee was loading a coupling into an assembler when the employee's right index fingertip entered the pinch point as the machine cycled, resulting in a fingertip amputation.",0
"An employee was operating a roller to compact dirt along the edge of an embankment in a construction zone. As the machine was backing up, the left rear tire ran off the edge of the embankment and the machine rolled down the embankment four to five feet and came to rest on its side. The employee was hospitalized for a rib fracture and a fractured pelvis.",1
An employee was loading watermelons into the field truck and stated that he was feeling tired and started passing out due to heat stroke.,1
"An employee was on a 12-foot A-frame ladder inspecting an air leak on a discharge pipe. As the employee was descending the ladder, he accidentally opened a release valve, which released a powder-like substance onto his face; this caused him to lose balance and fall from the ladder to the ground.  He suffered broken ribs.",1
An employee was edging a lawn and began to feel sick and ended up vomiting. He was hospitalized due to heat syncope.,1
"A crew was applying hot asphalt to a built-up roof. They were tearing off the old roof and applying layers of asphalt and roofing materials to build the roof up at several layers. Asphalt is heated on the ground and built up through a pipe, put into a pie boy and a low-profile mop cart (400 to 500 degrees F), and applied to the roof with a mop that spreads hot asphalt at the right thickness. Because the asphalt cools quickly, the crew had to lay it out in a grid on rolls of felt. The injured employee was dry-setting some felt while others were mopping. He was walking backwards and bent over, rolling out the felt. As he walked back to the cart, someone called out to him. He then fell over the tires and back onto the hot cart, rolled to the side to try and avoid the hot asphalt, but tipped over the cart. His inside forearm and outside forearm came into contact with hot asphalt, suffering third degree burns.",1
An employee was walking in the field and was struck on the shoulder by a flat bed truck that was backing up. The employee fell to the ground and the truck's rear passenger tire ran over their left leg.,1
"An employee was greasing hook rolls in the house while the machine was running. The employee's hand was then caught in the machine's belt and pulley, amputating the middle and ring fingers.",1
"An employee slipped and fell while climbing a caged ladder. The employee struck the cage and landed on the floor, suffering fractures.",1
An employee was entering a production line to weld a tab on a pipe when the employee's left leg (between the ankle and knee) was caught and injured between a steel pipe and a roller breaker.,1
"An employee slipped on gravel while throwing trash away, falling to the gravel and fracturing/dislocating the right arm.",1
An employee was caught between a counter weight and the crane outrigger when the outrigger slipped during crane assembly. The employee sustained approximately 4-5 fractured ribs and a fractured T12 vertebra.,1
An employee fell 10 feet from a bridge that was being demolished to the ground and suffered a left wrist fracture and a contusion on the left side of their body. Fall protection was not used at the time.,1
"On May 22, 2019, an employee slipped on a wet floor and fell while walking down a hallway. The employee was hospitalized with a broken left patella.",1
"An employee was performing maintenance on a rotator. The rotator had a catch in it so the employee was manually rotating the machine by pulling on the strongback, which was not bolted to the machine. As the machine rotated the strongback fell and struck the employee's right leg causing a fractured tibia and fibula.",1
An employee was standing on top of a conveyor belt that feeds the main bowl in the concrete plant trying to adjust the pulley. He was trying to loosen clamps or bolts when the belt started and the employee's right leg was caught in the belt opening resulting in amputation of the employee's right foot.,1
An employee tripped over a coolant container in the tool refurbishment department and fell to the ground. The employee suffered a broken right shoulder and either a broken right hip or femur.,1
"An employee stepped onto a wooden pallet, then onto a box to reach a box of vinyl gloves that were on a storage rack. She was approximately 12 
inches off the floor when she stepped down, tripped on plastic wrap, and fell to the floor, landing 
on her left side. She broke her left hip and required surgery.",1
A steel pallet fell off a conveyor that was not moving and onto an employee. The pallet crushed the employee's elbow.,1
An employee was securing the tarp on top of the trailer while standing on the trailer's fixed ladder. The employee fell off the ladder and suffered a head laceration and a bruised back.,1
"An employee and a second employee were cutting a log with a chain saw next to a storm water ditch. The employee walked to the downhill side of the log to position a 6-foot crowbar to assist with the log cutting. When he repositioned the crowbar, the log began to roll towards him and he fell into the ditch (approximately a 2-foot dry ditch). While he was in the ditch, another log rolled down. The second log crushed him and pinned him to the ground. He suffered a fractured pelvis and punctured bowel.",1
"An employee was working on the controller drive for the down hole equipment when he received an electrical shock, resulting in burns to the right thumb and left forearm and face.",1
"An employee was operating an offset roll machine when a steel part rotated and fell from the machine, striking the employee. The employee suffered a broken femur.",1
An employee was delivering pool supplies. The rope used to lift the roll-up door on the back of the truck got stuck. The employee attempted to use the powered lift gate to get the rope out by operating the lift gate and caught their left index finger between the lift gate and the truck. The finger was amputated.,0
"An employee was operating a golf cart in which he was carrying boxed materials. When the employee made a turn, the materials shifted and the employee reached back with his left hand to stop the boxes from falling out. At the same time, the golf cart was over-steered, causing the employee to fall out and hit the ground. He broke his wrist and was hospitalized.",1
"An employee was watching a crane operator lift a man-lift when the man-lift shifted toward the employee. He was pinned between the lift load and a piece of metal, fracturing his left arm.",1
An employee opened a bleed down valve and was struck by the bleed down line in the head and shoulder causing a laceration over the right eye and injury to the right shoulder.,1
An employee was feeding metal bar stock into a plate roller. The employee's right hand was caught between the rollers crushing the index and middle fingers. The two fingertips were surgically amputated.,0
"An employee was working on a 120, 240, service when a hot leg touched a neutral and an arc flash occurred. The employee received a third degree burn to the right middle finger.",1
An employee slipped on a trailer ramp and fractured a leg.,1
"An employee was cleaning off a roof when the employee fell 19 feet off of the roof to the ground below, suffering a fractured foot and vertebrae fractures.",1
"On May 22, 2019, at 12:00 PM, while an employee was trying to remove a valve on a forklift truck tire, it exploded in his face causing two lacerations on the face and fractured left elbow. The tire was not attached to the forklift at the time.",1
"An employee entered the newly remodeled fitness room, slipped on the wet concrete floor and fell breaking their pelvis.",1
An employee was filling bags with dry paint and had difficulty breathing. The employee experienced an allergic reaction to the paint.,1
"An employee was helping a crew perform a dry run for placing concrete slab when his hand was caught in a wrench drive shaft that engaged, causing a right hand laceration and finger dislocation.",1
"An employee was on top of a tractor trailer to secure dunnage and a spreader bar at the front of the trailer. He stepped backwards and fell off of the trailer, suffering a laceration to his right arm above the elbow that required hospitalization.",1
An employee was running a chain hoist to stack concrete lids on concrete bases. His left middle finger was caught between a lid and a base and the tip was amputated.,0
An employee sustained a knee injury while pulling a pallet off a truck.,1
"An employee was operating a lift truck to move a pallet when the lift truck collided with a support pillar. During this collision, the employee's hand was trapped/crushed between the vehicle and the pillar, requiring hospitalization.",1
"An employee was working with another employee on top of an oil storage tank at a field site, dismantling piping and attachments to the tank. They had removed a piece of 4-inch vent piping and were attempting to throw the pipe to the ground. While they were throwing the pipe from the tank top, the pipe caught the harness of the injured employee, causing him to fall 15 feet to the ground. He broke his right wrist and pelvis. The employee's fall protection harness was not tied off at the time of the incident.",1
An employee suffered a laceration to the left palm and amputation of the left thumb while using a saddle saw.,0
"An employee was loading an approximately 550-pound cargo box onto an aircraft when his finger was caught between the cargo and the aircraft's cargo bin door, resulting in a left pinky fingertip amputation.",0
"An employee was operating a pallet jack when the employee backed up into another driver whose load of pallets then fell onto the employee. The employee sustained a crushed left leg and broken left femur, requiring hospitalization and surgery.",1
"An employee, using a sling and hoist, was flipping a liner plate to inspect the underside. When he flipped and laid it down, the plate began to slip across the table. The employee used his right hand to try and stop the plate from sliding and the plate pinched his fingertip against the frame of the table. He suffered an amputation of the last digit of his right middle finger.",0
An employee was trying to hook up a trailer when he lost his grip and the middle of his left palm was crushed.,1
"An employee was bent over using a multi-purpose saw to cut a knee-high plank lagging board that was jammed. During the cut, the saw blade pinched, causing the blade to kick back and lacerate the employee's right shoulder.",1
"An employee was working near a conveyor that carried totes of tank bottoms. Another employee stopped the upstream. The employee placed a tank bottom on the stopped conveyor and it fell off.  The employee tried to catch it, and the tank bottom lacerated the employee's right inner forearm.  The employee was hospitalized.",1
"An employee was climbing a ladder to adjust the tarp on his dump truck when he fell from the top of the dump truck to the ground, injuring his head and requiring hospitalization.",1
"An employee slipped on a wet floor in front of the housekeeping storage room, suffering a right knee fracture.",1
An employee was using a table saw to cut wood when a board kicked back. The employee's left index finger contacted the saw blade and was amputated. The saw was unguarded at the time of the incident.,1
"An employee was pulling a pallet of produce out of a truck when he fell 3.5 feet off the truck's lift gate to the ground, suffering a skull fracture.",1
"An employee fell to the ground while exiting a delivery truck, breaking six ribs and his collarbone.",1
"An employee was directing a toter tractor operator to park a manufactured home in the second yard. He attempted to mount the moving tractor while the operator was in the process of making a turn. He fell and was struck and run over by the rear tire of the tractor, injuring the left side of his body. He suffered fractured ribs and a fractured leg.",1
"An employee lost control of his standup lift vehicle and dismounted it. The steering tire rolled onto his left foot, de-gloving his foot from the metatarsal to the toes and resulting in the loss of three toes.",1
An employee was cleaning a reciprocating conveyor. When the machine started the employee's right arm was caught in the conveyor and suffered multiple fractures.,1
An employee was talking to another employee when his legs started to give and he fell backwards and struck his head on the floor. He sustained a skull fracture and head trauma.,1
An employee was cleaning/replacing blades on a potato slicer when the slicer caused a partial right thumb amputation.,1
An employee was hospitalized after being struck by an airborne piece of wood. He sustained head and shoulder contusions.,1
"On May 23, 2019, an employee was operating a tube bender when her left hand was crushed in the pinch point between the clamp and a part. She was hospitalized with broken and lacerated fingers.",1
"An employee was helping a patient onto an elevator when the employee's foot was caught in the gap between the elevator and the building floor. The employee fell to the floor and fractured the right hip, requiring hospitalization and surgery.",1
"An employee was operating a pallet transfer lift when she reached under the lift to check the alignment of the lifting tabs and the lifting tabs engaged the underside of the unit, catching her left index finger between the lifting tab and the bottom of the unit. She suffered a fingertip amputation.",0
The forklift an employee was operating rolled and the employee sustained a head injury.,1
"An employee was putting a license plate onto the front of a truck when the truck ran over him and drug him into the wash bay. He was hospitalized with lacerations and a puncture to the face, lacerations to the arms, part of the ear cut off, and multiple internal injuries.",1
An employee was cutting a piece of wood with a circular saw when the saw amputated his left thumb.,0
An employee was attempting to clear a jam in the dust collector and caught their left ring and pinky fingers in the belt and pulley. The ring finger was amputated to the first knuckle and the pinky fingertip was broken. The machine was not locked out at the time.,0
An employee was working on a conveyor system trying to replace a chain that got out of the sprocket. The employee's middle finger was caught on the sprocket and amputated.,0
"An employee was performing her duties as a flagger when she was over by a forklift, fracturing her right leg and dislocating her pelvic bone.",1
"An employee was washing down a neck skinner machine when his left hand contacted the cutting blades, amputating five fingers.",0
An employee was operating a lift inside a wind turbine. He was outside of the lift when it moved and crushed his left arm between it and a rung. His arm broke and required surgery.,1
"On May 24, 2019, an employee was bitten by a spider. The employee was hospitalized the next day when the bite became infected.",1
An employee was guiding a forklift into a building when an A-frame that was holding four slabs of marble/granite broke. A slab then broke the employee's leg.,1
"Employees were installing a coupler in a rail car. The coupler got stuck to the forks on the forklift and as they were attempting to loosen the coupler, it fell onto an employee's right foot causing an open fracture to the big toe.",1
"On May 24, 2019, an employee was filling an oxygen tank when a valve on the tank failed and a flash fire occurred. The employee was hospitalized with burns to the face and torso.",1
"While cleaning a liquid bulk tank truck, an employee made dermal contact with aniline and was hospitalized for methemoglobinemia.",1
"An employee was climbing up a ladder to install low voltage wiring when he stepped back and fell approximately 3 feet to the ground, breaking his leg.",1
An employee was cutting a concrete pipe with a saw when the saw kicked back and lacerated the employee's bicep.,1
"An employee was performing preventative maintenance on a trimmer and when he went to lower the saw box platform, the pin holding the platform became stuck. The employee hammered at the pin, and when the pin dislodged, the platform swung down and hit the employee. The employee suffered a smashed upper arm with swelling and numbness.",1
An employee was operating a pallet jack and went to turn his pallet jack around when the jack slid on a piece of fat causing it to slide into a pillar that was holding a plastic roll holder. His left leg was caught between the plastic roll holder and the pallet jack resulting in a compound fracture to his leg.,1
"An employee was moving a cart of scrapple when the wheel of the cart became stuck in a floor drain, causing the cart to topple onto the employee. The employee suffered a dislocated left hip.",1
"On May 24, 2019, at approximately 0540, an employee was adjusting the sensors on the doors of a molding machine when the doors closed, trapping the employee. The employee suffered a fractured femur and fractured ribs.",1
"An employee was setting up a picking room when hot water spilled and caused second degree burns to the employee's neck, back, arm, and chest. The employee was hospitalized.",1
"An employee was bitten by a rattlesnake while measuring stream flow, requiring hospitalization.",1
"An employee was cleaning batching tank equipment when the employee disconnected a process pipe that was pressurized with hot water and chemical solution. He was sprayed with the mixture, causing first and second degree burns to approximately 11% of his torso and back.",1
"An employee was walking on a tiled hallway leading to the kitchen when he slipped and fell on the wet or damp floor, fracturing his right femur.",1
A crew was cutting trees along a fence line when a branch fell and hit an employee on the back of the head.,1
"When an employee disconnected a hose from a steam line, steam burned the employee's arms, hands, and stomach.",1
"An employee was threading a 12"" tail into the lead-out roll under the thru air dryer on a paper machine when the paper tail fell out. The employee went to manually tuck it into the nip point, and his right arm was drawn into the roller. He suffered a third degree burn to the right forearm that required hospitalization.",1
"Two employees were positioning a roll body on the floor in the vertical position to remove the profile sleeve. Once the roll body was positioned, an employee started to remove the lower drive key retaining bolt with a hex key. He was kneeling on the floor next to the roll body with his right hand resting on the side of the sleeve and his left hand operating the hex key. When the retaining bolt came loose, he lost his balance and his right hand moved to the floor to stabilize himself. As the retaining bolt and key fell out, the sleeve slid down the roll body to the floor, striking the employee's right hand. He suffered broken bones in the backside of the hand and a minor laceration when he pulled his hand out from under the sleeve.",1
"An employee was going into a resident's room and slipped on a wet floor, falling to the floor and breaking her right leg.",1
An employee dislocated an ankle when she turned resulting in a hospitalization.,1
"An employee was disassembling a powered actuated tool that was jammed. As he attempted to put the barrel back on the device, it was actuated and the ram rod impaled his right hand.",1
"An employee was installing duct work for an HVAC system when a 10-foot ladder slipped out from under the employee. The employee fell, breaking four ribs and lacerating a heel.",1
"An employee was operating a deli slicer. After she was done cutting, the moving blade amputated her left middle fingertip.",0
Ae employee's right hand was crushed while changing the forks on the forklift resulting in amputation of two fingertips and a crushing injury to a third finger on the right hand.,1
"An employee was patrolling the complex in a golf cart when the employee collided with a stationary trailer, suffering a laceration to the right leg, body contusions, a bruised aorta, and a blood clot in the heart.",1
"An employee was standing on a 24-inch high platform cleaning exhaust fans when he slipped and fell to the floor, breaking his hand and some bones in his fingers and dislocating his wrist.",1
An employee was changing the machine to another job and filling the tank with water. Her foot was caught on the machine as she turned the valve. She lost balance and fell backwards striking her head on the ground. The employee was hospitalized for a concussion.,1
An employee was performing maintenance on a rotating blower wheel when his pinky finger became entangled in a manually moving belt and pulley. The employee's fingertip was amputated.,0
An employee suffered a broken left ankle with contusions and bruising to the right ankle after being hit by a forklift.,1
"On May 25, 2019, an employee was pulling a cart when it spun out of control and smash the employee's finger. As a result, the employee's finger was amputated.",0
An associate was cutting a pork hock with a powered meat saw when the hock rotated and his right middle finger contacted the blade causing a partial amputation.,0
"On May 25, 2019, an employee was removing a 480V breaker when an arc flash occurred, resulting in burns to the upper parts of the employee's body.",1
An employee was moving a pallet of merchandise with a pallet jack when their arm was caught between the pallet jack and a carboard baler and fractured.,1
An employee's right index fingertip was amputated when it was caught in a chain and sprocket while working on a piece of equipment.,0
"An employee closed the door of her vehicle on her finger, resulting in a left index fingertip amputation.",0
"An employee was changing out a mud motor on the directional drilling rig. To make sure the motor was aligned, the employee did a bump test with a wrench. The wrench then swung and hit the employee in the hard hat, causing a small fracture to the head and slight bruising.",1
An employee was changing an anode mold. The employee's right hand was caught in a pinch point when a forklift raised the hot anode mold. The employee received second and third degree burns on the right hand.,1
"An employee was ripping plywood with a circular saw and prepping it to attach sheet rock when the saw hit a knot hole and bucked, landing on the employee's left hand and amputating the middle and ring fingers.",0
"An employee was walking through an aisle, slipped on detergent that spilled on the floor and fell. The employee suffered a broken pelvis.",1
"An employee was opening vertical coil tongs that were on the floor. As the employee began to open the device, it fell over and struck him on the right side. The employee suffered a right leg fracture and three broken ribs.",1
"An employee was stepping out of a plane onto the platform at the top of a movable stairway, slipped and fell fracturing an ankle.",1
"On 5/26/19, at approximately 11:30 p.m., an employee was using a chicken cutting blade to separate a leg quarter from a shackle when the employee's fingers contacted the blade, resulting in right index and middle finger amputations.",0
An employee was trying to dislodge a container lock on a vessel when he fell from a catwalk to the deck surface. The employee was hospitalized with a compound fracture to the lower right leg.,1
An employee was lifting a bin and suffered a muscle injury.,1
"On 5/27/2019, a grocery clerk was moving a pallet in the produce department with a powered pallet jack (walkie). The employee's foot was caught between a steel bollard on the corner of the deli case and the pallet jack resulting in fractures that required surgery and hospitalization.",1
"An employee was getting food from the walk-in refrigerator when she slipped on the wet rubber floor mat and fell backwards, hitting her head and back on a large metal keg of beer. She was hospitalized with a concussion and back strain.",1
An employee was operating an electric pallet jack. He jumped from the pallet jack and the jack struck a racking system. The employee's right big and second toes were crushed between the pallet jack and racking system.,1
"An employee was filling anhydrous ammonia in a nurse tank when it sprayed his face, causing a chemical burn.",1
"An employee was getting out of a truck cab after driving when he started to have back spasms, requiring hospitalization.",1
An employee was cleaning out a grain bin when their left leg was caught in the auger resulting in amputation of the lower leg.,0
Two employees were working on the Matterhorn ride. A cart came towards the injured employee and as he tried to push it out of the way he stepped into a hole on the machine. His leg twisted and fractured.,1
"While conducting fracking operations, an employee was digging out sand from the auger to a blender when the auger released and struck the employee's left middle finger, resulting in a laceration and amputation of the fingertip.",1
An employee was cleaning a reciprocating belt conveyor when the belt started up and the employee's arm was caught and fractured.,1
An employee was on an 8-foot step ladder removing a display. The employee fell from the ladder and fractured an ankle.,1
"An employee was riding a stand-up forklift and lost control, hitting a guardrail and lacerating a leg.",1
"On May 27, 2019, an employee was exiting her vehicle to deliver mail to a residence and stepped into a hole causing her to lose balance and fall to the ground. The employee suffered a left leg fracture.",1
"An employee was assisting with a boat docking when his finger was caught and crushed between the rope cleat, resulting in a finger amputation.",1
"An employee was climbing down a ladder after installing a sign. The ladder's leg slipped on muddy ground and the employee fell about 6 feet to the ground, suffering a broken wrist and lacerated liver.",1
"An employee was standing on a ladder working on a garage door when the employee's left index finger was caught in the garage door opener chain and sprocket, resulting in a finger amputation.",1
An employee was troubleshooting a testing machine and cleaning the laser. The machine has a rotating table above a hole where the laser shines through. The employee's left middle finger was caught between the edge of the hole opening and the rotating table when the machine was activated resulting in a fingertip amputation.,0
An employee was landing steel decking. A bar joist where the steel was being landed gave way causing the employee to ride the decking 25 feet to the ground. The employee suffered a cracked sternum and a broken rib.,1
"An employee was operating a blister sealing machine. While the employee was holding house wrap paper in place, the paper slipped and the employee's right hand entered the sealing machine. The employee's right thumb was amputated.",0
"An employee fell while on stairs, suffering a broken T-12 vertebra in the back.",1
"An employee was on a work platform placing a tarp on a mulch trailer when the employee fell approximately 10 feet to the ground, suffering a head injury.",1
"An employee was moving a rack of product to the staging area when the employee's left hand was caught in between the racks at the staging area, resulting in an amputation to the left ring fingertip.",0
An employee was using a circular saw to trim a wood frame. The blade slipped and severely lacerated the employee's index finger.,1
"An employee was walking to the time clock at the end of her shift, tripped over a mobile clothing rack and fell breaking her scapula and three ribs.",1
"On May 28, 2019, an employee was attempting to clear a jam from a foam swab machine when the employee's right hand was caught between the chain and sprocket, resulting in a middle fingertip amputation. The machine was guarded and not locked out at the time of the incident.",0
An employee was walking through the yard toward the shop when he was struck from behind by a feed truck. The employee was hospitalized with seven broken ribs.,1
An employee became disoriented while working outdoors during the pouring of a concrete bed. He poured ice cold water on himself and cramped up. He was hospitalized due to heat exposure.,1
An employee was walking in the lunch room slipped on the wet floor and fell. The employee suffered a fractured right foot that required surgery.,1
"An employee was operating a re-cutter machine and turned it off to remove a piece of trim from the mandrel. The machine was not fully stopped before he began to remove the trim and the moving parts contacted his left hand, resulting in a partial left index finger amputation.",0
An employee was operating a stand-up forklift in the warehouse when he approached another forklift and his left foot was caught between the forklifts. He received a fracture and laceration on his left foot.,1
"An employee was stepping down from a semi-tractor cab to hook up airlines and raise the trailer landing gear when the employee's foot missed one of the cab steps, causing the employee to fall 3 to 4 feet and strike the pavement. The employee injured the left elbow, requiring hospitalization and surgery.",1
"An arc flash occurred while an elbow was being removed from a transformer, and an employee suffered third-degree burns on the face, hands, and belly. The employee was hospitalized.",1
"An employee was using a cleaning agent when the employee ingested the agent, requiring hospitalization.",1
A safe door closed on an employee's right thumb and amputated it.,0
An employee was operating a shear and amputated the left middle finger.,0
An employee was found on the floor between two stacks of lumber. The employee had been stacking lumber in the frame mill upholstery department. The employee was hospitalized for cardiac arrest.,1
An employee was standing on a 4-foot elevated platform at a loading dock when the employee fell from the platform. The employee was hospitalized with a fractured left heel and a shattered left foot. The chains on the platform were not up at the time of the incident.,1
"A maintenance employee and a coworker were responding to a call in which an air intake hose had become disconnected from the air pump inlet. Upon arrival, the injured employee and coworker went to the electrical panel, which powered four 40-horsepower motors. The power to pump number 13-1 was turned off. The employee then went to the location of air pump 31-2 and reached around the intake to confirm there was no suction. The unit was still operating and sucked his left hand into the air intake impeller, severely injuring four fingers and resulting in the amputation of the first digit to the middle finger. The left hand index finger required sutures with no loss of bone, and the ring and little fingers had minor avulsions.",0
An employee attempted to slide an MC connector to splice an electrical wire and received an electrical shock.,1
"A nurse was checking on a patient in their room, tripped on a power cord and fell. Her head struck the floor causing a hematoma.",1
"An employee was welding two steel plates when one fell from its lifting device and struck his leg, causing multiple fractures.",1
An employee was walking to pick up tools on the 14th floor when he slipped on the wet floor and fell into a metal stud causing a laceration to the left hand/wrist.,1
An employee was operating an electric pallet jack when he was pinned between the jack and a rack.  He suffered a leg injury.,1
An employee fell to the ground when his boot lace became entangled on the fuel delivery hose fitting connected to the underground fuel tank. The employee suffered a torn right anterior cruciate ligament (ACL).,1
An employee was grinding stainless steel shim packs. The grinder kicked back and struck the employee's left hand causing a laceration to the index finger.,1
An employee was stepping over a washer and caught his foot in the loop of the rope attached to his cart. He fell and suffered a subdural hematoma.,1
"On May 29, 2019, at 1:30 p.m., an electrical maintenance technician was using a wrench to tighten a bolt on a roof exhaust fan assembly. As the employee was tightening the bolt, it broke causing their right hand to strike against the fan assembly resulting in amputation of the ring and index fingertips. The fan's energy source was isolated and locked out at the time.",0
"Employees were replacing a gasket on a well head that was tied to a crane. When they removed the bolts from the flange, the well head tipped over and fell onto the injured employee. Both of the employee's shoulder blades (scapula) were fractured as well as multiple vertebrae.",1
"While cleaning the restroom with bleach, an employee suffered an asthma attack and was hospitalized.",1
"On May 29, 2019, an employee was hospitalized after being struck in the chest by a piece of metal while troubleshooting the chip compactor after an explosion inside the machine. The employee sustained a chest burn and bruise.",1
"An employee was burning some pallets in an incinerator. Gasoline was poured on the pallets to help start the fire. When the fire started, the employee suffered burns on both arms, elbows and hands. His neck, face and ears were also burned.",1
An employee was wiping paint residue off a tire and lacerated their right arm.,1
"Three employees were in an all-terrain vehicle when the accelerator pedal stuck, causing the ATV to speed up. It rolled over as it swerved to miss a solar panel and pinned one of the three employees, breaking his femur and foot. He was hospitalized, requiring surgery.",1
An employee was troubleshooting a curver machine and amputated the left pinky fingertip.,1
An employee was inspecting a conveyor and caught their left ring finger between the conveyor and the conveyor frame resulting in a fingertip amputation.,0
An employee became ill and threw up while loading bales of hay. The employee was hospitalized for heat exhaustion.,1
"An employee was helping a drill rig operator and was cleaning out a pinhole when the pin was removed, causing the drill rig bar to raise and pin the employee's finger between the pinhole and the rig bar. The employee's left index finger was completely amputated at the distal phalanx joint.",1
An employee was lifting a box in a meat cooler and felt pain in his back. The employee suffered a lower back fracture and was admitted to the hospital.,1
An employee was icing the hides. A tub fell from a forklift during transport and struck the employee fracturing a leg.,1
An employee's left foot was caught in the load wheel on a forklift causing a crushing injury and a laceration to the big toe.,1
"An employee was pushing an emergency panic bar on an automatic sliding door, trying to close the door. Her left little finger was caught between the door and the frame, suffering a fracture.",1
An employee was pumping gas into a car. The car pulled away from the pump while the nozzle was still in the gas tank. The employee fell and suffered a hip injury that required surgery.,1
"On May 29, 2019, at 6:09 p.m., an employee was operating a manual metal lathe when his gloved, right hand was caught by the rotating equipment causing partial amputations to four fingers.",1
"At about 7:00 a.m. on May 29, 2019, an employee was pulling two pots apart when he had a severe allergic reaction to shellfish. Suffering breathing difficulty, he was hospitalized.",1
An employee was unhooking a float and crushed their right hand. The employee sustained an open fracture of the distal phalanx of one finger and a laceration to the middle finger.,1
"A press cycled and the die came down on an employee's left hand, amputating the little, ring, and middle fingers. The machine was energized and not locked/tagged out at the time.",0
An employee was troubleshooting a machine and was shocked causing the employee to fall to the ground and fracture their left arm and hip.,1
An employee was tightening down the cables on the railcars. As he was putting tension on the cable it pulled the slack and knocked him to the ground. The employee suffered a broken right leg.,1
An employee was helping to move floor tiles when the tiles struck and fractured the employee's foot.,1
"An employee was descending a ladder, lost his balance and fell 7 feet. The employee sustained a broken orbital bone and fractured vertebrae.",1
"An employee was using a grinder to sharpen a pick axe when his finger struck the rotating grinder wheel, resulting in a partial finger amputation.",0
An employee was working on a package delivery truck inside the shop when he started to feel dizzy and lightheaded and then fell to the ground. He was hospitalized for dehydration.,1
"An employee's stool collapsed, and its leg punctured the employee's leg.",1
An employee was conducting abrasive blasting on a 2-inch wide support for a garden chair. The hose dropped and the blasting material struck the back of his right leg.,1
A maintenance employee was working on a leaking pump and amputated the left ring finger.,0
"An employee was exercising and riding a horse for guest rides when a deer jumped out from behind garbage cans. The horse reacted to the deer, moving quickly or bucking. The employee was thrown to the ground, where the horse may have stepped on the employee. The employee suffered a right calf injury with swelling.",1
An employee was performing electrical rewiring operations and received an electric shock that required hospitalization.,1
An employee was standing at her work station doing spray bottle quality control when she turned around and fell fracturing her right leg.,1
"While cleaning a food processing machine, an employee suffered a severe laceration to the left ring finger.",1
"An employee was walking down a flight  of stairs when she slipped and fell to the hard floor, injuring her knees and striking her head. She suffered a possible concussion and was hospitalized.",1
"On May 29, 2019, a forklift was picking up a wooden pallet with parts on it off of a flat bed trailer. The pallet broke and the parts fell off the skid and bounced off the trailer, striking an employee that was walking by on the left knee. The employee was hospitalized for a knee fracture and lacerations.",1
An employee was taking a box off the conveyor belt. The employee turned and felt pain in the ankle. The employee then tripped and fell.,1
"A sharp aluminum piece on a die punctured an employee's left thumb. The wound became infected, requiring hospitalization.",1
An employee was operating a manual cutting machine and suffered a partial amputation to his left pinky finger while adjusting the die for a 10x10x16 piece of metal.,0
An employee was operating a grommet machine and suffered an amputation to their right index finger after their hand was caught in the machine.,0
"On May 29, 2019, at approximately 9:32 a.m. an employee was returning from a water break when he tripped and fell to the concrete sidewalk resulting in hospitalization for a fractured left hip.",1
"An employee was grinding a steel part on a stand-up grinder. While he was putting the part into the grinder and turning it, the wheel grabbed the part and then his gloved hand. His right thumb was ground down to the first knuckle.",0
"An employee was helping a customer unload palletized merchandise from the back of a trailer using a pallet jack. The employee's foot slipped off the ICC bumper while the employee's hand was on the strap to the overhead door; the door came down as the employee's body reached ground level, slamming on top of her hand. She suffered finger injuries that required pins and bolts to be installed.",1
An employee was using a reaming/beveling machine when his right index finger was caught in the clamp of the machine. The fingertip was amputated and was reattached at the emergency room.,0
"On May 30, 2019, an employee was using a battery-operated pipe shear to cut PVC pipe and suffered a partial amputation to the left index finger.",0
An employee was cutting aluminum with a miter saw when their left index finger was pinched by the plate of the miter saw. The finger was medically amputated at the first knuckle.,0
"An employee was using a miter saw when the blade cut the employee's left index finger, resulting in a medical finger amputation.",0
"An employee was operating a conduit-fitting pull test machine when he noticed the cable was not fully seated in the jaws. He pushed down the cable into the jaws. When the cable clicked into position, the machine finished the cycle with his fingertip still inside it, resulting in an amputation. The machine was guarded and had a light curtain on at the time of the incident.",1
An employee became dizzy from heat stress while driving a mail vehicle.,1
"An employee was opening a trailer door when the door hit the employee's head, cutting it. The employee was hospitalized.",1
"An employee was using a pry bar to loosen a chipper wheel on a piece of machinery when wet saw dust caused the chipper wheel to lock up. When the employee loosened the wheel, his position and force caused him to fall backwards. His foot was under the frame of the machine at the time and because of his momentum and angle, he fractured his right femur.",1
An employee was moving a water tank. Their finger was in a hole in the handle when the water tank struck the barrier protecting the electrical panels and removed the fingertip.,1
An employee was riding on the forks of a front loader and fell off. The employee was run over and sustained cracked ribs.,1
"An employee was walking around the plant doing inventory when a 200-pound load lift bar that was leaning against a wall fell onto his right calf, requiring several stitches.",1
An employee was lifting bags of salt for a water softener when he suffered a back injury. He was hospitalized.,1
An agent was operating an ATV during field operations when it rolled over. The employee was hospitalized for dehydration.,1
"An employee fell from his truck and landed on the floor, breaking his arm, his shoulder, several ribs, and his tailbone.",1
An employee fell out of a chair and injured their hip. The employee was hospitalized.,1
"An employee was adjusting a screw on an air puncher machine. The machine activated and pinched the tip of his left index finger, amputating it.",0
"An employee was removing a plywood blockout from inside a concrete box culvert segment. As the employee was sitting on the lip of the culvert and trying to grab a ladder, he fell off the culvert onto steel plate decking 3-4 below. He suffered a broken left tibia and was hospitalized.",1
"After placing empty cardboard into the baler, an employee grabbed the baler gate handle with his right hand and began to pull the gate down to close it. While he was adjusting cardboard with his left hand, the gate closed on his hand. The left index finger was partially amputated without bone loss, and the left middle and ring fingers were fractured.",0
"An employee was in a truck loading a wheelbarrow when the employee slipped and fell off the truck to the ground, suffering a head contusion.",1
An employee was investigating a leak on a mobile nursery tank that was filled with anhydrous ammonia when the anhydrous ammonia released contacted the employee. The employee experienced temporary vision loss and respiratory issues.,1
"While cleaning carpet in an office, an employee fell onto their left hip. The employee suffered a broken pelvis and was hospitalized.",1
Two employees were working from an aerial lift about 10 feet off the ground. One employee was taking off a bracket to remove an overhead wood platform. The platform fell and pinned the other employee's pinky finger against the lift's rail resulting in the amputation of the employee's pinky finger.,1
"An employee was unloading food from a truck when the employee fell between the truck and the dock to the floor, suffering contusions to the thigh and elbow.",1
An employee was on a 6-foot ladder in the waffle room cleaning the wall. The employee was on the third rung of the ladder and fell to the floor breaking his pelvis.,1
"An employee tripped over forklift forks and fell to the pavement, suffering a concussion with bleeding from the nose and mouth.",1
"An employee was using a handheld grinding tool when sparks ignited fuel vapors. The employee received burns to the legs, back, and arms.",1
"An employee was working on a ladder when the ladder's foot shifted on loose soil, causing the employee to fall 8 feet off the ladder. He fractured and dislocated his left ankle, requiring surgery.",1
"An employee was picking up a roll of paper from the corrugator with a clamp truck to take it to the roll room. The roll was elevated approximately 3 feet. The employee noticed that the outer wrap around the roll was loose. She got off the clamp truck to tape the loose paper while the roll was still elevated. She taped one edge of the roll and then walked in front of the roll to tape the other edge. As she was bent down in a crouching position to grab the loose paper, the roll came out of the clamp and fell on top of and then rolled over her. The employee was hospitalized for fractures to the left ankle, pelvis, tibia, rib cage and bruising.",1
An employee was descending a loader and fell fracturing his hip.,1
Four employees were lowering a boat into the water at a dock. An employee's left middle finger was caught in a gear resulting in a fingertip amputation.,0
An employee was handling a tag line for a unit assembly when the employee fell approximately 5 feet and suffered a back injury.,1
"An employee lost his balance and fell 8 feet from a residential flat roof to the grass/ground below, suffering a compound fracture of the tibia and a fractured tailbone.",1
"Two employees were trying to move a 62-foot-long, 2,000-pound part over on a conveyor table. On the third attempt, the part fell off the conveyor and landed on one employee's left foot. The employee suffered two broken toes and was hospitalized; the little toe was medically amputated.",1
"An employee tripped and fell to the sidewalk while turning, suffering a broken right femur.",1
"An employee was clearing a jam on a juice filling machine when his left middle finger was caught on the conveying chain, resulting in a fingertip amputation.",0
"An employee unlocked part of a two-part door. A metal lip was left at the bottom of the door. The employee tripped over the lip when walking through the open door frame. She fell and struck her left leg, fracturing the lower leg.",1
"An employee had climbed to the top of a ladder to stock tools. The wheels on the bottom of the ladder were not locked and another employee began to move the ladder to another location. The employee on top of the ladder lost balance and fell to the floor, suffering broken ribs and a punctured lung.",1
"An employee was delivering mail when a dog attacked the employee. The employee fell and hit their head, suffering a broken hip and head injury that required hospitalization.",1
An employee was hospitalized with a fractured left hip after tripping over merchandise in an upstairs office and falling to the floor.,1
"An employee was driving a go-cart on location when the employee showed signs of dehydration, confusion, and vomiting, requiring hospitalization for possible heat stress.",1
An employee was taping empty tubes on a bar when the bar started to rotate grabbing the tape and the employee's left arm. The employee suffered a broken left wrist.,1
"A 2,640-pound tote was being unloaded from a delivery truck when it rolled onto an employee's left leg, breaking it.",1
"An employee was forming a part on a brake press machine when the employee's finger was pinched between the part and the die, resulting in a right index fingertip amputation and a broken right index finger.",0
"On May 31, 2019, an employee was filling a propane gas cylinder used for forklifts when pressure from the nozzle came off of the propane cylinder and knocked him to the ground. He sustained a fracture to his right hip and was hospitalized.",1
"An employee was pushing through the entrance door when he reached back to keep it from slamming shut. His right ring finger was then caught between the door hinge. When he felt the door closing on his finger, he pulled his hand away. The fingernail to come out and amputate his fingertip.",0
"An employee was cutting chicken when he reached over a box and his plastic apron became caught on something. He was attempting to pull on his apron when his arm to flew out and struck a saw blade, resulting in an arterial laceration to the left forearm.",1
An employee was operating a die cutting machine when his left hand was caught between the clamshell platen and a stationary die. All four fingers (except thumb) on the left hand were crushed resulting in amputation.,1
"An employee was attempting to clear a jam on a filler machine when her right hand was pulled into the machine and pinched between the mandrel, resulting in lacerations and broken bones to the right hand.",1
"An employee was locating a dog pin in the reel when their finger was caught between the dog pin and wire reel, resulting in a fingertip amputation.",0
"An employee was connecting a water pump on a truck when the truck driver pulled forward, running over and fracturing the employee's right foot.",1
"On May 30, 2019, at approximately 7:40 p.m., an employee was performing set-up tasks on a material molder when the employee's right hand contacted an unguarded rotating cutter head.  The injury resulted in an amputation to the right index finger at the second joint, and a partial amputation to the right middle fingertip.",0
"An employee was cleaning an elevator shaft pit prior to installation of elevator doors. The employee began descending a step ladder into the elevator shaft pit when the employee fell from the ladder onto a steel pipe at the bottom of the pit, fracturing the right femur. The employee was hospitalized and had surgery. The step ladder legs were not set and locked at the time of the incident.",1
An employee was nailing siding on a building with a nail gun in a lift. The gun shot him in the lower chest and upper stomach.,1
An employee was filling concrete molds when a cement auger amputated the index and middle fingers from one of his hands. The machine was guarded at the time.,1
"An employee was helping care for youths when one of them struck her seven or eight times from behind, in the head, with the metal gooseneck of a faucet. She was hospitalized.",1
"An employee was driving an electric cart in reverse down an incline. While coming down the incline at an increased speed, he turned the wheel and was thrown from the cart onto a concrete driveway, injuring his head.",1
"An employee was catching veneer material off a moving table. When the table moved upwards and then down, the employee's pinky fingertip was caught under the tabletop, resulting in a fingertip amputation.",0
"An employee was crimping wire terminals using a crimping machine. As she was fixing a jam, the machine crushed a finger on her left hand, causing the amputation of the tip. The machine was guarded at the time.",0
"An employee was lifting a dry goods box to unload it from a semi trailer. The employee was facing a 2 in. x 4 in. x 4 ft. wooden brace, lodged across the width of the trailer. The brace moved and struck the employee in the face, causing a cervical contusion, a disc herniation with radiculopathy, cervical stenosis, and facial lacerations.",1
"On May 31, 2019, an employee was clearing a jammed bag from the bagging machine sealer when his right middle and ring fingers were caught between the transfer belt and the bagging machine's shaft. He sustained a laceration to both his right middle and ring fingers and was hospitalized.",1
"An employee was serving as the spotter while iron was being offloaded from a loader. The iron struck him, causing fractures to the face and jaw.",1
"An employee was working on a scaffold 3 feet off the ground when the employee lost footing and slipped, causing the employee's arm to come down onto the frame of the scaffold. The underside of the employee's arm caught the scaffold pin, causing a 3- to 4-inch laceration that required sutures and hospitalization.",1
An employee was mowing a lawn when the mower amputated his ring finger.,1
"While terminating some cables in an electrical cabinet, an employee suffered second- and third-degree burns from an arc flash.",1
"An employee was adjusting a slow-flow valve while resting his free hand on the H block. As he was tuning the valve, his finger was caught and crushed by the H block.",1
"An employee was changing a tire on a spreader at a farm. The employee removed the right, rear tire and was rolling it to the front of the spreader. The tire kicked out and as the employee tried to get away from the tire, he slipped on loose gravel and fell to his knees. The tire landed across his back and pinned him to the ground. The employee was hospitalized for three fractured lumbar vertebrae.",1
An employee was attempting to load a tractor into the bed of a pickup truck when the tractor flipped and landed on top of him. He was hospitalized with two fractured vertebrae in the back.,1
"An employee was operating a powered pallet jack and heading to the north cooler door. When the employee made it to the north cooler, another pallet jack operator was leaving the cooler. The employee backed out to allow the other pallet jack operator to exit the cooler. After the other pallet operator exited, the employee turned the handle on his pallet jack and the machine went backwards. The pallet jack then hit the cooler guard and the employee's lower left leg was caught between the jack and guard, resulting in a broken lower left leg.",1
A temporary employee was running a spot welding machine when it was activated via the foot pedal. The machine then cut his right index finger at the first knuckle.,1
An employee was manually trying to slide the forks over on a forklift. A finger on his left hand was caught between the fork and the forklift's carriage (a piece that hung down). The fingertip was amputated.,1
"An employee driving his scheduled route in a semi-truck was shot in the left shoulder, in a random act of violence, and was hospitalized.",1
"At approximately 12:55 a.m., an employee was helping another employee load steel beams onto a tractor trailer. He picked up a beam with an overhead crane using the crane's remote control box.  After attempting to maneuver the beam into an open space on the trailer, he determined the beam would not fit because it was too wide. He placed the beam on top of a smaller pile of beams. During this process, the chain holding the load caught the flange of an adjacent beam, tipping both beams and a tube. One of the beams landed on him. He was hospitalized with a fracture to his right ankle, a laceration on his right leg, and a sprain to his left ankle.",1
"An employee was climbing down a ladder when a nearby belt and pulley system caught his left hand, causing the amputation of the little finger.",0
"An employee was working with archived files in a large outside metal container in the heat and suffered dehydration, an acute kidney injury, and muscle breakdown.",1
"An employee was working at an aluminum press. As he was inserting the clean-out ring, the press closed on his left hand, amputating four fingers.",0
Two employees were in a scissor lift removing a brick wall using a cutoff saw. The saw bucked and lacerated the left forearm of the second employee.,1
"An employee was working at a new home construction site on a ladder, lost his balance and fell to the concrete floor below. The employee fractured the right wrist and had pain in the lower back and hip.",1
"An employee was removing dough caught in the stamping station of a roll-making machine. The machine caught his right hand, amputating the little finger.",0
An employee was stepping off the bottom rung of a ladder when he fell to the floor and fractured his right hip.,1
An employee was operating a standup counter-balanced forklift when he lost control and was about to hit a vendor's vehicle parked inside the warehouse. His foot stuck out before impact and became stuck between the forklift and the vehicle. He suffered a broken and lacerated big toe and a punctured calf.,1
An employee was stabbed multiple times with a knife while working at a client's home.,1
"An employee was replacing a light on a trailer using an extension ladder. The employee fell off the ladder to the ground about 4 feet below, breaking his right tibia and fibula.",1
"An employee had just finished installing knives on a planer. When power was connected and the machine was started, a knife broke and part of it flew into the employee's left forearm and head.",1
An employee fell while working in a concession stand and was injured.,1
An employee was caught in between a vehicle and tool boxes when a van came off the lift.,1
An employee was operating a press brake and partially amputated the left middle and ring fingers.,1
"An employee was on a 10-foot ladder retrieving product from a shelf, when he fell and struck his head on the concrete floor. The employee suffered a fractured skull and an intracranial hemorrhage.",1
"An employee was up a tower in a wind turbine. A metal plate (a blade access cover) moved, causing the employee to fall about 7-10 feet into the inside of a blade. The employee suffered internal abdominal injuries.",1
"An employee had just straightened a crooked stack of pans going into a pan unstacker. The pan eye activated the machine, causing it to cycle. The employee's left index finger was caught in the machine, causing a degloving injury and an amputation injury.",0
"An employee working in a deli tripped and fell to the floor, breaking her hip.",1
"On June 2, 2019, at approximately 3:00 a.m. an employee was working on the line in the converting department. The employee's duties were to flip packs of towels as they exited the bundler and before they entered the case lift. The employee flipped a pack and noticed it did not flip completely over. As the employee tried to retrieve the pack, his left arm slipped and his left hand was caught in the conveyor rollers. The employee was hospitalized with hand and arm injuries.",1
An employee was securing empty barges when his right middle finger was caught between a mule rope and a barge cleat. He suffered an amputation to the finger.,0
An employee was adjusting a screw machine when the 18-pound lid on the back of the machine fell on his left ring ringer. The tip was amputated.,0
An employee was involved in a truck accident on a private road and was hospitalized.,1
An employee was involved in a motor vehicle accident at an intersection at the port. The employee was knocked unconscious and suffered broken bones.,1
An employee amputated a fingertip while using a hydraulic cylinder and wrench to remove a nut from a blow out preventer.,0
"On June 2, 2019, an employee was aligning watermelons on a conveyor belt when a forklift pushed a flat plastic pallet against his feet. He suffered an injury to the right ankle and was hospitalized.",1
"Two employees were using a scissor grab to lift a graphite spacer. As they were standing the spacer upright, the grab slipped off, fully extended, and spun, striking one of the employees on the left hand. The tip of the employee's little finger was amputated.",0
"An employee was checking a conveyor through an inspection port. The employee's left hand was caught in the inspection port and lacerated, on the top and bottom, by the paddles on the auger. The employee was hospitalized and had surgery.",1
"An employee was riding a horse while herding/checking cattle when the gate to the pen contacted the horse she was riding. The horse was startled and the rider was bucked off resulting in a fractured right clavicle, right scapula and ribs on the right side.",1
An associate fell off a ladder while working in the produce cooler. The employee fell onto a knee and sustained a knee injury that requires surgery.,1
An employee was cleaning off a saw table at the end of the day and amputated the right pinky fingertip.,1
"An employee tripped while climbing stairs, and his hand was caught in the pinch point of a conveyor belt. He suffered an amputation injury to a finger.",0
An employee was removing a piece of wood from the off end of a wood dryer. The employee's right hand was caught in the dryer's chain and sprocket; four fingertips were amputated.,0
"An employee was cutting a steel beam on the 11th floor. As the employee was relocating the steel beam, it slipped and amputated a portion of his right index finger.",0
"An employee was in a stairwell, going downstairs, when a loose stair nose caused her to fall forward down the stairs. She suffered a broken jaw (in three places); a broken tooth; and bruising to both thighs, her chest, and her left shin.",1
"One employee struck another during a physical altercation, breaking the second employee's jaw. The injured employee was hospitalized.",1
"An employee was reeling in a winch cable on a garbage truck. The employee's finger was caught between the cable and the winch drum, and the tip was amputated.",0
An employee's foot was caught between a metal storage rack and a 6-inch beam that a forklift was pushing. The employee's left ankle was broken.,1
"An employee was on fire watch and fell 18 feet from an open catwalk to the ground. The employee was hospitalized for a fractured scapula and a broken rib on the left side, a head laceration and heavy bruising on the right arm.",1
An employee was using two-wheel hand carts to move merchandise. The hand cart trays separated and the dolly was knocked out from under the stack. The stack came back toward the employee causing him to lose balance and fall off the dock onto the ground fracturing an elbow.,1
An employee fell while climbing down from a step on a tractor catwalk. The employee's head struck the concrete floor.,1
An employee slipped and fell on wet grass and struck his head on the sidewalk. He was hospitalized for a concussion.,1
"On June 3, 2019, an employee experienced heat stress/dehydration and was hospitalized.",1
A maintenance employee was troubleshooting a thermoformer machine. The machine started up while his hand was near the belt and pulley causing a partial amputation of his thumb.,0
An employee was clearing a clump of dough from a pasta machine when the machine's knife amputated the tip of his finger. The machine was guarded at the time.,0
A roofer felt dizzy and nauseous. He was hospitalized for heat related injuries.,1
An employee fell from the back of a garbage truck to the ground near the road. The employee was hospitalized for a fractured skull and a back strain. The employee also had a seizure and/or a brain bleed.,1
A pipeline inspector was walking up a hill when he started having pain in his chest and shoulder. The employee was hospitalized for a potential heart issue.,1
"An employee was releasing the tie-down strap and fell from his truck. He sustained a broken hip, bruised ribs and a right shoulder injury.",1
An employee was unjamming a paper bagging machine and amputated the tip of his left middle finger.,0
An employee was removing and stacking pieces of lumber from a saw when his shirt became wrapped around a shaft on the outfeed resulting in a laceration to his left shoulder that required hospitalization.,1
An employee was feeding steel into the die of a press. The tip of the employee's left pointer finger was amputated.,0
"An employee was hooking a trailer to a tractor. The truck began rolling backwards, and the employee's upper left arm was pinned and broken between a container parked next to the truck and the open driver-side door.",1
An employee was closing an air hole on a charcoal kiln with insulation when the kiln surged and fire came out of the hole. The employee sustained third degree burns.,1
An employee was using a powered weed trimmer at a customer site and passed out. He was admitted to the hospital for heat exhaustion.,1
An employee stepped down from an uneven surface and fractured their right tibia and fibula.,1
A welder was placing a long piece of metal (18 ft. x 1 ft. x 2 in.) on a table in preparation for welding when the metal slipped from his hand and smashed his left thumb between the piece of metal and the table. The employee was hospitalized for a possible left thumb tip amputation.,1
"An employee was cutting a piece of aluminum with a chop saw, which caused an amputation to his left index finger.",0
An employee was sanding plates on a sander when his left hand was caught between the material and the sander wheel as it was rotating. The employee received stitches on the ring and index fingers and amputated the middle finger at the first knuckle.,0
An employee was operating a rewinder machine and partially amputated the right index finger (distal phalanx).,0
"An employee was preparing to melt granulated sugar with hot water to make liquid invert sucrose. The employee turned on the drum pump and walked over to the measuring tank to monitor filling. While the employee's back was facing the pump, the pump discharge hose came undone and a discharge of hydrochloric acid (HCl) struck the employee's back causing first and second degree chemical burns.",1
An employee tripped and fell in the store and broke a knee.,1
"At about 10:30 a.m. on June 3, 2019, an employee was on an oil rig that was being rigged down. As the rig was reaching half mast, the employee was on the rear of the rig, placing the weight bucket onto the storage hook. As he dismounted the rig, he lost his footing and his right hand was caught in a pinch point between the top and bottom sections of the derrick mast as it came down. He suffered injuries, including an amputation injury, to the index, middle, and ring fingers.",1
"At about 10:30 p.m., an employee was collecting mail outdoors when he tripped and fell onto a rock, breaking his jaw. He was hospitalized.",1
An employee slipped and fell and suffered a broken right arm.,1
An employee was separating a cow from a gate. The cow struck the gate which in turn struck the employee in the left forearm causing a forearm fracture that required surgery.,1
"An employee tripped and fell on their way into work, suffering a broken hip.",1
A server was carrying a bowl of cornbread and fell resulting in a fracture of the distal humerus and hospitalization.,1
Employee received an electrical shock while pulling cable from a customer's attic.,1
"On June 3, 2019, at approximately 12:00 PM, a temporary employee was placing reams of paper onto a conveyor when her glove was caught pulling her left hand into an area where two conveyors converge. The employee's left ring and pinky fingers were injured and the employee was hospitalized.",1
"An employee was moving a gas meter post to a truck, tripped and fell. The post landed onto his left hand and fractured three fingers.",1
"An employee was changing out a hydraulic cylinder when his finger was pinched between the cylinder and the base, causing a partial fingertip amputation.",0
"On June 4, 2019, an employee was working on a residential garbage route. As he was cycling the hopper's blade to make room for more garbage, a chemical splashed onto his upper limbs and abdomen, causing second-degree burns. He was hospitalized.",1
A Ramco employee was directing a dump truck into position at a worksite when a pickup truck backed over the employee breaking both legs.,1
An employee operating a forklift collided with another employee operating a pallet jack. The pallet jack operator suffered fractured toes on the left foot.,1
Two employees were carrying a pipe when a connection clamp released and closed on a finger on one employee's right hand. The finger was amputated at the third phalanx.,0
An employee was opening a large dumpster lid when the lid fell and the employee fell down to the ground hitting her head on the concrete. She sustained a concussion and a hematoma to the head.,1
"On June 4, 2019, a crew was installing fiber across a railroad crossing. A train came through and snagged the fiber. The fiber caught an employee in the neck area and the employee was thrown to the ground. The employee sustained cuts to the head and neck and was hospitalized.",1
"On 6/04/2019, an employee was performing a sanitation detail on a conveyor belt. His arm was caught in the roller and twisted resulting in a fractured forearm that required surgery and hospitalization.",1
"Wire wrapped around a bulldozer operator's ankle, breaking it.",1
"An employee was working outside at a vegetable farm, pulling plastic off vegetables. The employee lost consciousness due to heat-related illness.",1
"On 6/04/2019, an employee was cleaning debris off the roof of a residential property and fell off the roof. He was hospitalized for injuries to his head and left arm.",1
An employee's feet were crushed by a mud bin.,1
"A lineman was working in an aerial lift when a leaking, broken hydraulic line injected fluid into his hand. He was hospitalized.",1
"On June 4, 2019, an employee was using an ATV to spray herbicide along the grass beside a highway. The vehicle got stuck in a rut and was being pulled out by another ATV when it rolled over, ejecting her to the ground. She suffered a fracture to the lower left leg and was hospitalized.",1
While walking to her work vehicle an employee tripped and fell on the concrete fracturing her right hip.,1
An employee was moving a loaded roll cart from the room to the staging area. He was pulling the cart by the handle using an underhand grip and struck a support beam crushing his right thumb between the beam and handle.,1
"An employee was assessing the condition of a boat, an auction item. While exiting the boat, the employee fell 3-4 feet to the floor, suffering injuries including a broken right leg. The employee was hospitalized.",1
An employee was adjusting the tension on the conveyor belt and caught their index finger between the belt and the roller resulting in a laceration.,1
"An employee was finishing a vehicle when he lost consciousness due to dehydration, causing him to fall and hit his head.",1
An employee was parking a standup forklift and caught his left foot between a wall and the forklift resulting in broken bones and hospitalization.,1
An employee was working with hydrochloric acid when the acid went straight up in the air and landed on the employee's apron sleeve. The liquid flowed down the apron into the employee's glove and burned the employee's hand.,1
An employee was attempting to clean sawdust out of the dust pipe on the six-head bandsaw and contacted the moving saw blade causing an open fracture/laceration on the right middle and ring fingers. A part of the middle finger was surgically amputated. The machine was unguarded and not locked out/tagged out at the time of the incident.,1
An employee was gathering cattle into the pen. Cattle struck the gate and the gate struck the employee knocking the employee to the ground. The employee struck their head on a rock and suffered a skull fracture.,1
An employee was struck by a forklift and suffered fractures.,1
An employee was trying to lock a trailer into a loading dock when he was pinned between the trailer and the dock. He suffered a crushed pelvis and femoral artery.,1
"An employee slipped and fell while walking out of a freezer, suffering a broken lower left leg.",1
An employee was standing on a ladder installing a light fixture and fell approximately 3 feet when the metal ladder collapsed resulting in a broken right arm.,1
"An employee was walking in the vehicle check-in area, tripped on a manhole cover and fell to the ground. The employee sustained cuts on his face, a torn muscle in the left leg, and a pulled hamstring in the left leg.",1
An employee was repairing pallets using a nail gun when a nail was fired into his upper right thigh.,1
"An employee was working on an HVAC system on the roof. The employee bent over to drink water, lost footing on lose rocks on the roof and fell onto a skylight. The skylight broke and the employee fell approximately 20 feet onto a stairway landing. The employee suffered a broken left wrist, 
left side rib, 
tailbone and left hip.",1
"An employee tripped on a pallet while moving merchandise. The employee fell to the concrete floor, suffering a dislocated left kneecap.",1
An employee was operating a forklift and crushed their left foot between the lift and a rack.,1
An employee was on a scaffold performing stucco work at a one-story residence and fell approximately 8 feet striking his forehead on the face of the building. The employee was hospitalized for abrasions to his forehead.,1
"Before noon on June 4, 2019, a marine inspector was conducting an inspection on board a fishing vessel at a shipyard. As the employee was climbing out of the vessel's anchor chain locker, he was shocked by a damaged extension cord running through a chain attached to shelving on a bulkhead. He suffered nerve damage to his thumb and thermal burns to his forearm muscle, and was hospitalized.",1
An employee at a gas station was walking across the pumps wearing a reflective vest and was grazed by a car. He lost his balance and fell. He was hospitalized for two broken bones in his neck.,1
"An employee was on a 24-foot extension ladder when the ladder's metal feet slid on the smooth concrete floor and the employee fell about 8 feet to the floor. In striking the floor and the ladder, he suffered a broken wrist.",1
"On June 4, 2019, at approximately 11:45 AM, an employee was judging the weight of a piece of metal (solid slag metal for centrifuge) by lifting it. The metal piece slipped and fell catching the employee's left index finger between the metal and the ground or pallet jack and caused a fingertip amputation.",0
"An employee had just finished cutting a tree with a chainsaw. As the employee stepped back, his foot went into a mucky hole and he fell. The tree bounced and fell onto his right hand while it was on a stump, crushing the ring finger. The finger was amputated.",0
"An employee was getting ready to grind a part. The lathe (rotating roll) was turned off but was still spinning when the employee's hand was pulled into a pinch point between the roll and grinding wheel, amputating a finger.",0
"An employee was moving a pneumatic chain saw. When the employee picked the saw up, it struck another employee, causing lacerations below the shin.",1
"An employee was confirming measurements on the fascia/soffits. While dismounting the ladder, he lost balance, caught his foot on the front rail of the ladder, and fell onto metal cutting shears that impaled his right side. He suffered injury to his kidney, liver and colon.",1
An employee was cutting a steel irrigation pipe with a powered concrete saw. The saw kicked back and lacerated the employee's face and neck.,1
An employee was training a dog when he became tangled in the leash. When the tangled employee turned around the dog bit him on the left arm. The bite broke one bone and bruised the other bone on the forearm.,1
"An employee was standing at a pile of 50-foot wooden utility poles, measuring a pole, when a pole shifted, pinning his right leg and breaking the femur.",1
An employee was stepping from an interstitial concrete landing 10 feet above the floor onto a 16-foot fiberglass A-frame ladder. He had one foot on the interstitial landing and one foot on the ladder when the ladder tipped sideways and he fell 10 feet to floor below. He fractured his left heel bone and left L4 vertebra.,1
"An employee was feeding parts into a shaper cutter. As the employee was edging a panel, the machine's moving blade amputated all five first joints on the employee's right hand. The machine was not guarded at the time.",1
"An employee was resetting a breaker on an electric motor when an electrical arc occurred resulting in burns to the employee's right ear, right hand, thumb, and index finger.",1
"An employee was pulling a riding lawn mower up a ramp onto a truck. The truck's tail gate gave out and fell, causing the ramp to fall; the lawn mower then fell onto the employee.",1
An employee was walking towards the back of the forklift to talk to the employee who was operating the forklift. The forklift rolled back and over the employee's right foot. The employee fell down and landed on his back suffering a broken right pinky toe and severe bruising to his lower right leg.,1
An employee was using a plasma cutter to cut a hole for a fitting. The plasma cutter penetrated the tank wall and residue within the tank ignited. A flame shot out of the hole and burned the employee.,1
An employee operating a pneumatic press sustained a right index finger amputation at the second joint.,0
"An employee was hit by a car while guiding a team driver into a loading position. She suffered fractures to the ribs, right thigh, and left knee.",1
An employee was performing roofing activity using a circular saw and cut his right thumb resulting in an amputation.,1
An employee was picking up an electrical box to install it. The box slipped and when the employee went to grab it his right hand went inside of the box and contacted a thin sheet metal edge that severed tendons and veins on the middle and index fingers.,1
"An employee was driving a water truck to spray a newly chipped road, lost control, jumped from the truck and was partially run over. The employee sustained a broken leg and pelvis.",1
An employee was operating a double jack and was backing out of the tractor trailer when he struck the corner of a portable conveyor causing a laceration to the lower left leg.,1
An employee suffered a fingertip amputation when the hydraulics released and their finger was caught within a space between the bar of the magnet and the claw of the manipulator machine.,0
"An employee jumped off a truck while it was moving. The employee's head struck the road, causing a head injury.",1
"While conducting equipment and vehicle maintenance, an employee was struck on the head by the hatch door of the vehicle, suffering a head injury that required stitches.",1
An employee sustained a partial amputation to their left ring finger while lowering the liftgate on a tractor trailer.,0
"On June 05, 2019, an analyst was walking across a carpeted surface to her workstation when she tripped and fell fracturing her elbow. She was admitted to the hospital.",1
"An employee was sandblasting from a scaffold. The scaffold fell and the employee struck the ground, suffering broken vertebrae.",1
An employee slipped while trying to get to a basket of food at a fryer. His right hand went into the hot oil and he suffered a burn.,1
An employee fell from a mobile ladder stand.,1
An employee was positioning a metal pipe to make a connection. He was holding on to one end of the pipe when a coworker went to move the pipe into place on the other end. The employee's left hand was caught between the pipe and a rock resulting in amputation of the index fingertip.,0
An employee was notching materials on a vertical band saw and partially amputated his right index finger.,1
An employee was pulling a customer order. He was walking backwards from a storage rack when he tripped and fell on the floor. He sustained a fractured left hip.,1
An employee was conducting maintenance on the conveyors. His left index finger was caught in the chain and sprocket of the gear controls causing a partial amputation.,1
"An employee was on a ladder installing cable at customer's two-story house. The ladder slipped and the ladder and the employee fell to the ground. The employee sustained a wrist fracture, a chin fracture, a concussion and a facial laceration.",1
An employee was pushing one cart and pulling another full of merchandise. One cart stopped abruptly in the doorway and the employee's finger was crushed between the two carts resulting in a fingertip amputation.,1
An employee was disconnecting a flow board and was burned on the abdomen by hot water.,1
An employee slipped and fell while grabbing a door handle on a delivery vehicle. His head struck the ground and he suffered a concussion. He was hospitalized.,1
"Two employees were on a platform under a bridge, removing decking. The platform failed and both employees fell to the riprap area; one employee broke his pelvis.",1
A security officer was attacked by a patient and struck his head on the floor. He sustained a skull fracture and a brain bleed. He was hospitalized.,1
An employee fell while going down a stairwell and broke an ankle.,1
"On June 5, 2019, an electrician was performing electrical work at an assisted living facility that was under construction. He was working with a junction box at an open ceiling grid from an 8-foot A-frame ladder when he was shocked and fell to the ground. He suffered several broken ribs, a head contusion and fractures to the L3 an L4 vertebrae. He was hospitalized.",1
"An employee was unloading a bundle of bridge foundation beams. While disconnecting the rigging chains, the beams shifted and the employee's leg and foot were pinned between two beams causing foot and ankle fractures.",1
"An employee was working in an attic when he fell through the ceiling to the first floor 25 feet below. He suffered multiple injuries to the left side of his face, left pelvis, left lung, brain, right and left wrists, arm, and right knee.",1
An employee test drove a stand-up model control pallet truck after a repair and lost control resulting in lower leg fractures that required hospitalization.,1
An employee was cutting a piece of wood with a portable powered saw. The saw amputated two digits on the employee's right hand.,1
"An employee was at the side of a truck (a pulling unit) removing tools. As the pole on the unit was extended, the elevator came unclasped off the hook, fell, and struck the employee on the side of his head. He suffered a skull fracture.",1
An employee was inside a truck counting the load and started feeling dizzy and fainted due to possible heat exhaustion.,1
An employee was walking in the production area while carrying bags of product. The employee slipped on water drainage from adjacent equipment that was being washed and fell striking their head on the floor. The employee was hospitalized.,1
"An employee was climbing down a ladder when he fell 3 feet to the ground, breaking his arm.",1
An employee was preparing a shaft weighing 831 lbs. for grit blasting. The saw horse legs kicked up; the shaft began to fall and the employee tried to catch it. The shaft struck the employee's abdomen and crushed it.,1
An employee was struck by a car in a parking structure. She suffered a broken left ankle and a torn right rotator cuff and was hospitalized.,1
An employee was changing the die on a die cutting press when four fingers were crushed. Two fingers were later surgically amputated.,1
"An employee noticed a coolant hose dripping on a blow mold during a new mold setup. The employee attempted to push the hose into a quick connect fitting to stop the leak. Upon reaching into the molding area, the employee's thumb came to rest on top of a positive stop. The mold then closed, capturing his thumb on the positive stop. His right thumb had to be surgically amputated. The blow mold was guarded at the time of the incident.",1
"An employee was lifting a patient with a lift, lost balance and fell striking her head on a dresser. The employee was hospitalized for a possible concussion and a bruise on the left arm.",1
An employee was assisting with removing the chain tongs from the drill string. The chain struck his finger and pinched it against the drill head. The employee was hospitalized with a broken finger. The employee was wearing impact gloves.,1
"An employee was responding to a part jam in a CNC machine. A pressurized spindle fell into place, pinching two of the employee's fingers and amputating the tips.",0
The injured employee was detailing the trunk of a vehicle to get it ready for auction. Another employee moved a car forward and pinned the injured employee against the trunk causing significant injury to the left leg (multiple fractures and muscle damage).,1
"A fitting on a line popped off and hot water sprayed an employee's left foot, causing a burn.",1
An employee used an air jack to lift a vehicle for electronic measure. The jack slipped and amputated the employee's left thumb.,0
"An employee fell from a roof to the floor about 8 feet below, breaking his heel.",1
An employee was struck by lightning while unloading shingles onto a residential roof. The employee sustained burns.,1
An employee was installing an engine cradle bolt when the cradle shifted and partially amputated the tip of his left thumb.,0
An employee was cutting winding pins on a band saw when the pin slipped and the employee made contact with the blade. The employee sustained an amputation to one of their fingers.,0
"An employee was cutting tile with a tile saw when the saw blade cut his fingers, resulting in amputations of the index, middle, and ring fingers on his left hand.",0
"An employee was seated in a car rental office lobby. He stood up, lost his footing, and fell, hitting the right side of his head on a glass wall and breaking his right hip on the floor.",1
An assistant starter was handling a horse in a starting gate. The horse acted up and smashed the employee's left middle finger against the structure. He was hospitalized.,1
"The injured employee was emptying scrap hoppers. The employee released the latch so the hopper can dump into the dumpster. The employee placed his left hand on the fork attachment point of the hopper and when the emptied hopper moved back into the latched position his gloved, left hand was caught between the hopper and the attachment point on the forks. The employee suffered a left ring finger amputation.",0
"An employee was standing on the top cap of a 3-foot step ladder cleaning a vent. As she was stepping down from the top cap, she lost her footing and fell off the ladder landing on her right leg and fracturing the tibia.",1
The employee was taking in a delivery while standing on the ramp of the receiving dock. The delivery driver pulled away from the ramp while the employee was taking in the delivery and the employee fell four feet from the dock to the ground below and broke the right knee cap.,1
An employee was assisting an inmate when the inmate became aggressive and placed the employee in a choke hold and knocked her to the floor. The employee fractured her left knee and was hospitalized.,1
"On June 6, 2019, an employee traveling on a forklift struck a rack, had a seizure, fell off the forklift and struck his head on the floor, fracturing his eye socket.",1
An employee was working to unfold a crease at the end of fabric that was feeding into a set of nip rolls on a machine. The employee's right hand fingers were pulled into the nip roll injuring the index and middle fingers. The middle fingertip was amputated.,0
An employee fell 10 feet from a ladder.,1
"An iron worker was shaking out steel deck panels when he fell from a 32-foot-high deck to the ground, suffering multiple fractures.",1
A machine operator was working on plank edge finishing. Her left pinky finger was amputated with it was caught between the pads on the machine and pulled into the machine.,1
An employee tripped and fell as she moved from a parking lot onto a sidewalk. She suffered a broken hip and was hospitalized.,1
An employee suffered fractures to the fingers while operating a liftgate.,1
An employee was cutting plywood when the blade amputated the tip of the employee's left index finger.,0
"An employee was working in a portable office trailer when a tornado touched down on the jobsite, tossing the trailer. The employee suffered cuts and broken ribs.",1
"On June 5, 2019, an employee was installing countertops in an apartment and stepped on a screw that went through the sole of his shoe into the ball of his right foot. The employee was hospitalized to treat an infection.",1
"As it was being removed from the ground, a 20-foot section of sheet piling struck an employee in the face, causing fractures to the upper jaw and the orbit of the left eye.",1
An employee was operating a pallet jack loading donated goods onto a truck. He slipped and fell on the floor and sustained injuries that required hospitalization.,1
"An employee tripped over an uneven surface at a construction site and fell to the ground, suffering patella fractures.",1
An employee was working at the site moving building materials. He was not feeling well and suffered from heat stroke/exhaustion.,1
"An employee was setting up a ladder when his hand slipped off the ladder and struck a threaded rod, breaking his hand.",1
An employee fell down steps and hit his head on the concrete floor. He was hospitalized.,1
"An employee was pulling utility poles with metal chains. The chain got stuck and as the employee was freeing the snag with his hand, the chain snapped back and struck the employee's left thumb causing a partial amputation.",1
"On June 6, 2019, an employee was separating a fiberglass part from a mold using compressed air. The part released from the mold and struck the employee's forehead. The employee was hospitalized for a skull fracture.",1
"On June 6, 2019, a grain elevator operator was cleaning out a grain bin using a long scraper to scrape the residual grain from the edges while standing on a ladder. The ladder cannot be opened in the area due to the conveyor belt running down the middle. The employee leaned the ladder up against the wall and climbed up to perform the scraping duties. The employee's foot hit the moving conveyor causing the ladder and the employee to fall over. The employee landed on the conveyor and was dragged under a spout where the employee got stuck. The employee suffered a broken hip, broken ribs and a punctured lung requiring hospitalization.",1
An employee was pouring some compound on the ground and began to feel unwell and had cramps. The employee was hospitalized for dehydration.,1
"An employee was cleaning a slicer when the employee's right index fingertip was cut on the slicer blade, resulting in a fingertip amputation.",0
"An employee was removing a gear from an engine using a crane. The employee was unhooking a come-a-long when the crane operator noticed tension on the gear box. The crane operator lowered the gear and the employee unhooked the come along. The gear box came loose, swung, and hit the employee, pinning him between the gear box and bulk head. He fractured his left arm and ribs on the left side.",1
"An employee was removing a bird from a house when he fell from the back door to the concrete 8-10 feet below (there was no back deck). He broke his leg in five places and was hospitalized, undergoing surgery.",1
"An employee was bringing out product from a cooler and tripped over a box. The employee fell to the floor, fracturing her left femur.",1
"A forklift ran over an employee's ankle, causing a fracture and ligament damage.",1
"An employee was walking alongside two rail cars. When they were disconnected, the rear car began to move. The employee was moving to set its hand brake when the wheel ran over his right leg. The leg was medically amputated below the knee.",1
The injured employee was with another employee who was lifting a pallet of freight with a crowbar. The injured employee placed their hand under the pallet and the crowbar slipped causing a right index fingertip amputation.,0
"An employee was walking a dog when the dog took off running and pulled the chain, causing the employee to fall to the ground and break his arm.",1
"An employee was working on a valve on a water chiller (storing several thousand gallons of water) for a high-rise building. A nozzle or pipe broke off, sending water under very high pressure out of the pipe. The force of the spray knocked the employee off of his feet and pinned him against the wall. His legs were subjected to water under high pressure for about two minutes.",1
An employee was walking along the loading dock and fell four feet to the concrete ground. The employee was hospitalized with eight broken ribs.,1
"An employee was working in an attic when he fell through the ceiling to the ground 8 feet below. He suffered a broken shoulder, a facial laceration, and a concussion.",1
An employee was operating a manipulator (a piece of equipment used to lift a 50- to 100-pound connecting pin). The employee's right ring finger was caught between the manipulator's handlebar and a metal workstation desk; the fingertip was amputated.,0
"An employee was performing maintenance on a wireline tool that was hooked up to a control panel. He closed a panel on the tool with a command at the control panel. As the panel was closing, he was turning the tool and his fingers were caught in the backup shoe of the tool resulting in an amputation injury.",0
An arborist was climbing onto a roof from a ladder to trim trees near the roof and fell 10.5 feet to the flagstone and cement walkway breaking both shoulder blades and an upper thoracic vertebra.,1
"On June 7, 2019, an employee was changing a gasket on the CSP line. The employee opened a clamp and was sprayed by hot water, suffering second degree burns to both arms, the chest, the back, and the neck.",1
"A saw activated while an employee was checking for an air leak, and the rotating blade amputated part of the employee's right thumb.",0
An employee was driving a stand-up forklift down an aisle when the forklift hit a rack. The employee suffered a compound fracture to the leg.,1
An employee suffered a heat-related illness after a 12-hour work shift. The employee was hospitalized.,1
"An employee was adjusting a shim in a saw when the clamping mechanism closed, amputating the employee's right index finger between the clamp and the shim.",0
"On June 7, 2019, an employee was installing wood trim on the ceiling of a new house from a baker's scaffold. The scaffold came apart and the employee fell 7 feet to the ground. He sustained a broken left wrist and right elbow and was hospitalized.",1
"An employee was rolling a piece of 3/8-inch round bar into a plate roll when his glove was pulled into the form rolling machine, resulting in a left-hand fracture/partial amputation.",0
"An employee was juking a pile of concrete when a triangle beam hit the top of the concrete pile, causing a section of the top edge to chip off, fall, and strike the employee. The employee was hospitalized with a fractured left humerus and skin avulsion.",1
"An employee tripped and fell on a floor, suffering an open arm fracture with blood loss.",1
An employee was cleaning and restacking 2-liter bottles when the employee's foot became tangled in shrink wrap. The employee fell onto the concrete floor and suffered a hip fracture.,1
"An employee was operating a horizontal bandsaw. The clamp amputated his left index finger, about halfway to three-quarters of the way down the finger.",0
An employee was painting the dormer of a house when the employee fell approximately 9 feet from the roof onto the ground and broke the right wrist.,1
An employee was operating a stand-up sprayer and fell off a retaining wall. The employee was hospitalized for multiple fractures to the right shoulder.,1
"An employee was standing in an excavation when a capped, abandoned-in-place, 12"" cast iron water line became pressurized and pushed out of the ground, striking and pinning the employee's leg against the cut end of another pipe. The employee's leg was severely crushed.",1
An employee was loading a trailer. The employee's hand was on the edge of the trailer job box when the lid slammed down and amputated the right middle fingertip above the nail.,0
An employee was climbing over an iron fence at a customer's home to deliver a package. He slipped and the fence impaled his right leg.,1
"An employee was climbing a ladder to repair an HVAC system when he fell from the ladder, suffering a broken pelvis, broken right foot, and head injuries.",1
"A temporary employee was helping unload corn crates. A tossed crate hit the employee in the head, causing a head injury. The employee was hospitalized.",1
An employee was threading a machine when his right arm was caught in a nip point between the drum reel and the spool. He suffered a crushing injury to the forearm and amputation of the ring and pinky fingers on the right hand.,1
"On June 7, 2019, an employee's fingertip was pinched while he was operating a manual clamp. He suffered an amputation and was hospitalized.",0
"An employee was trying to direct a crane load from the back of a Palletized Load System (PLS) vehicle. The employee was struck by the crane load while getting out of the way of the swinging load and suffered a fractured left wrist and elbow, a bruised hip, and a torn left rotator cuff.",1
An employee was shocked while restoring a plate on a bus table. The employee was hospitalized with a burn.,1
An employee was making adjustments on a machine and suffered a partial amputation of the left ring finger.,0
"An employee was operating a forklift, which had a T-bone collision with another forklift. The employee suffered four broken right ribs, a bruised right lung, and skin bruising and was hospitalized.",1
An employee was loading raw material into the ginning machine and amputated his hand at the wrist.,0
"An employee was helping a vacuum truck operator during pigging operations when a fitting broke, allowing the vacuum hose to whip and strike the employee's heel. The employee suffered a left heel contusion.",1
An employee slipped on a piece of raw chicken laying on the floor and fell. He dislocated his right hip and injured his right knee.,1
"An employee fell, suffering a knee injury.",1
An employee had just finished harvesting honeydew melons and was riding a trailer to the parking lot. He fainted and fell backwards injuring his head. He was hospitalized with a laceration to his head and for possible heat exhaustion/stroke.,1
An employee was hospitalized after falling off of a ladder onto the ground. The employee fractured their pelvis and right wrist and tore a ligament in their knee.,1
"An employee was trying to install a motor when the motor slipped and he tried to catch it. His fingers were pinched between the motor and the bracket, partially amputating two fingers.",0
"An employee was helping to secure a header part when it became unhooked and fell on his right big toe, dislocating it and lacerating toes next to it.",1
An employee was exiting an armored truck to make a delivery when an attempted robbery occurred. He was shot in the arm and required hospitalization.,1
"An employee slipped on water on the floor and fell, suffering a broken left leg and right arm.",1
An employee was attempting to apprehend a shoplifter when the employee fell and broke the left tibia.,1
"An employee fell from a fixed ladder on scaffolding, landing on the floor on his left side and injuring his left wrist and torso.",1
An employee was trying to unclog a pipe to a discharge bag when a rotary blade inside the valve amputated the fingers on the employee's left hand. The machine was energized at the time.,1
An employee tripped on a parked hand pump jack. He fell on the pump jack and broke his right arm.,1
"An employee was filling a propane cylinder when the hose came loose from the cylinder. Propane sprayed on the employee's thighs, causing first degree burns.",1
An employee was climbing an electrical pole to make a line connection. His hand was burned by the electrical line; he was hospitalized. The line was energized at the time.,1
"An employee was carrying a tray of coleslaw into a cooler. He tripped over a produce box on the floor and fell, his right knee striking the concrete floor. He suffered a broken right femur and was hospitalized.",1
"An employee was cleaning out a rock dump with an air lance when the air lance became caught in the rock agitator, pulling the employee's hand into a moving part. The employee suffered a laceration and dislocation to the right index finger. The agitator chute was not guarded at the time of the incident.",1
"On 6/08/2019, an employee was power washing a building from inside a motorized bucket lift when the water hose of the power washer became lodged in the lift, causing it to trigger the up switch located in the bucket. When the lift began to rise unexpectedly, the employee jumped out of the lift, falling approximately 12 feet to the concrete sidewalk below. The employee fractured the left arm, nasal, and orbital bones; suffered a concussion and blood clot; and lacerated the left leg.",1
"On June 9, 2019, an employee tripped on the corner edge of a wall partition and fell to the floor, suffering a back fracture.",1
"An employee was walking down some stairs when he fell down the stairs and his face struck the ground, resulting in facial fractures and lacerations.",1
An employee was working outside in a rail car cleaning process area. The employee began to suffer heat-related muscle cramps and was hospitalized.,1
"An employee backed a forklift next to a battery charger and stepped off. The forklift ran over his foot, fracturing it.",1
"An employee was riding a motorcycle when his foot peg became caught on the ground and he ran into a light pole. He fractured his wrist, shoulder, and pelvis.",1
"An employee was trying to remove paper at the infeed side of a paper machine's pull stack. The employee's fingers were caught in the paper rollers, causing amputations to the three middle fingers of the employee's left hand (at the first joint) and the right index finger.",1
"An employee was cutting meat with a bandsaw when the saw amputated his right little fingertip, which was reattached at the hospital.",0
"An employee was helping a forklift with its load. The forklift pinned the employee, causing a broken right tibia. The employee was hospitalized.",1
"An employee was providing bedside care to a patient with a catheter and was walking away from the patient when she tripped over the catheter, which was implanted into the patient at the time. In order to avoid forcible removal of the catheter from the patient, she attempted to adjust her fall. In the process of doing so, she landed awkwardly on the floor, resulting in a fracture of her left hip and left wrist. 

She was hospitalized and required surgery.",1
"An employee was cleaning the scrap pit around a baler when his glove was caught in the in-running nip between the belt and the idler roller, resulting in a left arm fracture. He was hospitalized.",1
"An employee was restarting a vapor combustion unit when a burner lit, causing a flash fire. The employee suffered second degree burns.",1
"An employee was offloading a road milling machine from a lowboy trailer when it fell off the trailer and tipped over. The employee was thrown from the machine and struck his head on a parked asphalt roller. He received a head laceration, injured elbow, and three broken ribs.",1
"An employee was cleaning out a kettle when the contents in the kettle overheated, boiled out, and splashed him. He sustained chemical burns on his right arm, back, and hips.",1
"A boiler plug was leaking and the new plug would not seal due to galling on the threads. Employees tried to grind the threads straight. A boiler gate valve was closed, so the employees used a spray of penetrating oil. Sparks from the grinding caused flames to release from the boiler. The pressure forced an employee backwards and led to burns on both of the employee's arms.",1
"Two employees were operating forklifts throughout the facility. The first employee was leading and the second was following at the time of the incident. Both employees were operating without loads. While traveling, the first employee made an abrupt turn in front of the second employee. The second employee was unable to stop or swerve to avoid collision and ran into the rear of the first employee's forklift, causing it to roll over. The first employee's foot was pinned and broken between the forklift and the ground.",1
"Two employees were adjusting the placement of a 500-pound steel beam on a truck. The beam rolled over onto the employee's hand, crushing and amputating his left middle fingertip.",0
"An employee was knocking down a cinder block wall when the block wall fell on and injured him, requiring hospitalization.",1
An employee was bending over to scan a product on the bottom of a cart when the employee's head hit the cart. The employee may have suffered a concussion.,1
"An employee was reinserting a burner tube into a separator when his left index finger was caught between the tube and separator, amputation the top half-inch of his finger.",1
"An employee was bent down, welding retaining straps for drydock blocks, when a forklift knocked over a stack of blocks. The blocks rolled over and hit the employee, causing a lower back injury.",1
"On June 10, 2019, an employee was helping to unjam a conveyor belt when the conveyor started up and caught the employee's right hand. The employee suffered compound fractures to the little and ring fingers.",1
An employee fell from the hood of a tile plow and struck his head on the floor. He suffered a concussion and bleeding on the brain and was hospitalized.,1
An employee was answering a roadside service call. The sleeve on a jack stand came down and amputated part of the employee's thumb.,0
A temporary employee was retrieving a trowel from a concrete form when their right thumb was caught between a concrete bucket and the form during a concrete pour. The thumb was amputated.,1
An employee tripped and fell while leaving a walk-in cooler. She suffered a broken left femur.,1
"An employee was on a walkie rider and lost control, slamming into a staged pallet of merchandise and falling off the rider. The employee suffered a foot injury.",1
"An employee fell on a wet kitchen floor, suffering a concussion and back injuries.",1
"Two employees were rolling a piece of tube steel over when one of the employee's fingers was caught between the steel and the floor, resulting in a right middle fingertip amputation.",0
"An employee was standing near the front of a loader carrying pipe. Several pipes rolled off the loader and one of them struck the employee's right foot, rolling up his leg and causing a fracture of the lower leg.",1
An employee was operating an ironworker machine. The employee's left index finger was caught and amputated in a pinch point between a pipe and a guard.,0
"On June 10, 2019, an employee was exiting a railcar after loading a vehicle on the top deck when the employee slipped on the ladder rung and fell to the ground. The employee experienced fractured ankles and fibulas and a broken right foot.",1
"An employee was climbing an extension ladder when it slipped out of place and fell, taking the employee with it. He broke his left leg.",1
An employee retrieved a box of film from a shelf and was climbing down a step stool when the employee missed a step and broke the right ankle.,1
"An employee was adjusting the flywheel on a partial revolution power press. The employee's left middle finger was caught between the flywheel rod and a piece of metal, causing the amputation of the last digit.",0
"An employee fell while working at the rear of a delivery truck. The employee's head struck the asphalt ground, causing a head injury; the employee was hospitalized.",1
"On June 10, 2019, an employee was using a hammer to nail a pallet board when a piece of the nail broke off and hit the employee's eye, requiring hospitalization and surgery.",1
"An employee was moving a part off a welding fixture using a hoist. The magnet released, dropping the part on the employee's left hand. The employee's left middle fingertip was amputated.",1
An employee was operating a stand-up forklift to remove shrink rolls when a shrink roll fell off the dashboard. He tried to move it with his left foot and his left ankle was pinned between the forklift and a mobile lifting machine.,1
"An employee was adjusting a portable temperature probe used to take temperatures on blanks when the blanks closed on the employee's finger, amputating the right index fingertip.",0
"An employee was transporting a patient on a gurney and walking backwards up a slight incline when the employee tripped and fell to the floor, suffering a broken hip.",1
An employee was driving a golf cart in the lot area. The employee was returning inside the building because it started raining. There was an open metal bed trailer parked in the lot with the tongue hitch sticking out. The employee did not see the trailer's tongue hitch and hit it with the golf cart. The plastic windshield of the golf cart hit first and came off. Then the employee hit the tongue hitch with his face. The employee suffered lacerations to the face and a fractured left eye socket and a fractured lower jaw.,1
An employee fell on a wet floor while walking through a shop. She suffered a broken left femur.,1
"While unloading a truck, an employee saw a pallet falling over and tried to stop it. The pallet fell on the employee's left thigh, causing a contusion.",1
"An employee was using a die changeover table with a snake chain conveyor. The e employee activated the snake chain via remote and it moved quickly, causing the employee's right index finger to be pinched between the pin and edge of the die and amputated.",0
"An employee was near a scrap pile. An excavator was pulling metal from the pile when a piece of railing got caught on some scrap, broke free, and went flying. It struck the employee's left calf and lacerated it. The employee was hospitalized.",1
"On June 11, 2019, an employee was using a powered press to heat-press leather sheets together. The machine crushed the employee's left ring finger as it closed. The finger was surgically amputated.",0
"An employee was loading furniture in a car when a bee stung him, causing an allergic reaction. He was hospitalized.",1
"An employee was changing a bit on a millwork machine. A wrench fell into the machine while it was spinning, contacting the employee's little and ring fingers and causing amputations to both.",0
An employee's left hand was caught between an elevator rail and the floor while he was moving the rail using a channel dolly. The middle and ring fingertips were amputated.,0
"On June 11, 2019, an employee was pulling a pallet off a truck when it fell on him, dislocating his shoulder and breaking his foot.",1
"An employee was using an A-frame ladder to access a backyard when the employee fell to the ground, suffering fractured vertebrae.",1
"An employee was working from a 3-foot step ladder while cleaning a machine when the employee fell from the ladder, resulting in a broken ankle.",1
"An employee was walking into the store when she tripped on a rippled rug at the entrance and fell to the floor, fracturing her right shoulder.",1
"An employee was on top of a stacker attempting to adjust some bundles. The bundles became unstable and fell on the employee, who suffered a broken pelvis and broken ribs.",1
"An employee was raking cans into a pit for recycling. While the employee was in the pit, his arm was caught in the conveyor, suffering an amputation at or near the elbow.",1
An employee was visiting a site prior to it becoming fully operational for shipping. He exited the warehouse and was walking towards the parking lot when he fell approximately 5 feet off the dock and into the loading pit. The loading dock was open at the time of the incident.,1
"An employee was hoisting a 5,000-pound steady rest with a 50-ton overhead shop crane. The load fell on his left leg, crushing it from the knee down. The leg was medically amputated.",1
An employee was attending firearm training at a shooting range. A second employee had a live round in his rifle that discharged while he was doing a gun function test. The first employee was shot in the right foot.,1
"An employee was ""rodding"" a boiler (unclogging a plug of smelt) when the plug let loose. The smelt, which was under pressure, then sprayed the employee. The employee was severely burned by molten smelt on the face, neck, shoulder, and leg, requiring hospitalization.",1
"An employee fell down a flight of stairs, striking a planter and suffering head contusions and lacerations.",1
An employee was moving an extension ladder from a house in order to load it back onto a truck. The ladder either made contact with an electric line or the electricity arced to the ladder and electrocuted the employee.,1
"An employee was operating a chop saw to cut dunnage when the employee's right pinky finger contacted the saw blade, resulting in a partial finger amputation.",0
An employee was washing the inside of a tanker with a high-pressure hose when he lost control of the hose and jumped off the top of the trailer. He suffered a shattered left foot.,1
"An employee was completing an inventory when the entire second floor where she was working collapsed beneath her. She fell and landed on construction material, fracturing her neck and requiring hospitalization.",1
"An employee was removing rope from a pipe when the employee's right hand was caught and crushed between the pipe and a tire, requiring hospitalization.",1
"On June 11, 2019, an employee was climbing an extension ladder. The ladder shifted when he was on the third or fourth rung, forcing him to jump; he broke his left leg upon landing on the ground. He was hospitalized, undergoing surgery.",1
"An employee was trying to assist another employee in getting a downed animal to stand up. When the downed animal was able to stand, it charged one of the employees from behind. The employee suffered a fractured pelvis.",1
An employee was loading packages inside a trailer. The employee was standing between the boxes and the edge of the conveyor when the conveyor moved forward and pinned the employee against the boxes. The employee suffered a punctured lung.,1
An employee felt dizzy and had cramps while conducting landscaping operations. He rested to the end of the shift and was later hospitalized for heat illness.,1
"An employee was closing a door to a paint booth. The employee's left thumb was caught between the door and the jamb, sustaining a partial amputation to the tip.",0
An employee was operating a stand-up forklift. It backed into a parked forklift and the employee suffered lacerations to the thigh. The employee was hospitalized.,1
"On June 11, 2019, an employee was attempting to reach the edge of a metal roof when he slipped and fell approximately 15 feet to the ground. He sustained a fracture to his right wrist, multiple facial fractures (including his mandible), and a concussion. He was hospitalized. The employee's lanyard was unhooked at the time of the incident.",1
"An employee was pinned between an outrigger and a truck, suffering a fracture of a lower-back vertebra and abdominal trauma.",1
"An employee was helping to clear a pallet jam in a pallet exchange machine when the pallet machine released and pinched his left middle fingertip, resulting in a fingertip amputation.",0
An employee was cutting a wooden 2x4 using a hand-held circular saw and amputated his left thumb.,0
"An employee was trying to retrieve stuck candy from a wrapping machine when the lid came down on the tip of her left ring finger, amputating it.",0
"A load of material suspended from a forklift became unstable and fell, breaking an employee's leg.",1
"An employee was operating an asphalt saturator when a break in paper occurred. The employee was removing the asphalt-saturated paper from the saturator box when a roller caught the employee's gloved left hand and pinned it against the gate, crushing and burning it. The employee was hospitalized, undergoing surgery.",1
"An employee was removing a roller from a conveyor belt. The roller fell, smashing his left little finger against the floor and amputating the tip.",0
An employee was walking across a bulk dock when she was struck by the forks of a passing forklift. She broke her left ankle and foot.,1
A temporary employee was operating a stand-up forklift when the forklift struck a rack. The employee suffered a left foot injury.,1
"An employee was lifting a walkway grating over a cross joint when the employee's right middle finger was pinched between the grating and the cross joint, resulting in a fingertip amputation.",0
"On June 11, 2019, an employee fell 14 feet down a freight elevator shaft and suffered a broken elbow.",0
"An employee was using a portable grinder. Its wheel lacerated the employee's forearm, and the employee was hospitalized.",1
An employee sustained a hot tar burn on his hand from a hot tar kettle splash.,1
"An employee was on a ladder when it slipped on the smooth floor, causing the employee to fall. He suffered a laceration to the left knee, fractured left-side ribs, and a punctured left lung.",1
"An employee was using a saw to cut a sample ceramic tile piece when the saw blade cut her right pinky finger, resulting in amputation of the finger.",0
"A U.S. Postal Service employee suffered heat-related dizziness, shortness of breath, and cramps while delivering mail. The employee was hospitalized.",1
"An employee was changing casings on a clipper machine when the employee's left hand entered the machine's point of operation, resulting in an amputation of the left pinky finger and laceration of the left ring finger.",0
"An employee was offloading bags when multiple bags fell and struck the employee's left knee, resulting in a possible infection to the knee joint.",1
"An employee was in a loader bucket 10 to 13 feet high working on a crane when he fell and landed on the ground, suffering fractures to the ribs, kneecap, and toe. Fall protection was not worn at the time of the incident.",1
"An employee was exiting the break room as another employee was entering. The door or the other employee bumped into the injured employee, resulting in her falling to the floor. She was hospitalized with a right hip fracture, requiring surgery.",1
"An employee was inside a trench putting lube on a laid pipe when an iron pipe came loose from a backhoe and struck him, injuring his left side and left lung.",1
"An employee received an electric shock to the head and face while testing a battery bank, suffering head and facial electrical burns.",1
An employee was cleaning a press. The employee's right ring fingertip was caught and amputated in a pinch point.,0
"An employee was working in an airplane's aft cargo section. A tug struck the belt loader and pushed it into the belly of the aircraft, where it scraped the employee's feet (causing swelling) and broke the employee's legs above the ankles.",1
"On June 12, 2019, an employee delivering mail for approximately 4 to 5 hours experienced heat exhaustion. The employee was hospitalized.",1
"An employee was addressing a break in the paper product on a production line. The employee removed some asphalt-saturated paper from the saturator box. As the employee attempted to remove additional paper from the machinery, the employee's gloved left hand became caught and crushed on a roller. The employee was hospitalized.",1
"An employee was climbing down from a trailer truck when he fell to the ground, breaking his left leg and right wrist.",1
"An employee was loading and unloading trailers on a dock when he was involved in an altercation with a coworker. The coworker hit him on the left side of his face with a dock hook. He was knocked unconscious and hit his head on concrete when he fell, suffering facial fractures and a concussion.",1
"An employee was banding a bundle of cut flat steel bars with an overhead crane when the bundle slipped out of the hoist chains and fell onto the employee's right middle finger, crushing and breaking it.",1
"An employee fell over a pallet in a stock room, landing on the floor face first. The employee suffered a head injury that required stitches, as well as a broken kneecap.",1
"An employee was turning to climb down a fixed ladder when he lost his balance and fell approximately 15 feet to the floor, breaking three vertebrae and his left elbow. He was hospitalized.",1
"An employee was pulling a pallet jack when he entered a lane of traffic and was struck by a pallet on a forklift. He suffered a dislocated ankle, fractured fibula, and fractured tibia.",1
"An employee was aligning a bushing on a tubular machine. The housing moved, pinching the employee's left index finger against the bushing. The tip was amputated.",0
"An employee was attempting to reposition a board on a stacker unscrambler when the unscrambler moved and caused another board to fall on the employee's hand. The employee's hand was caught between the two boards. The employee sustained a crushing injuring to the right middle finger, resulting in amputation. The machine was not locked out at the time of the incident.",0
"On June 12, 2019, an employee was adjusting the air line on the back of a truck. The employee slipped and fell, suffering a head injury and a lost tooth.",1
"An employee was using a 9"" grinder on a skid when the grinder slipped off the skid and slashed the inside of the employee's left upper leg. The employee was hospitalized and had surgery.",1
An employee was working from a ladder above a suspended ceiling. The employee fell through the ceiling to the concrete floor and suffered a broken clavicle and multiple broken vertebrae.,1
"On June 12, 2019, at approximately 10:06 a.m., an employee was working near the back of a concrete truck when the bolts that hold the tag axle in place broke, causing the tag axle to fall and strike the employee. The employee was hospitalized with a broken clavicle, broken foot, broken ribs, and a ruptured spleen.",1
"An employee was cutting a stainless steel line with a chop saw. Residual radiation-curing resin inside the line sprayed out onto his chest, stomach, and thighs, causing second-degree burns.",1
An employee was on a man basket near the wellhead on an oil and gas rig. The employee was screwing an entry guide onto a blowout preventer while a crane was removing it from the wellhead. The lubricator/blowout preventer moved and caught his right middle and ring fingers between the entry guide and the cap on the frac head. The middle finger was amputated and the ring finger required surgical treatment.,1
"An employee fell from an order picker, suffered a broken wrist, and was hospitalized.",1
An ironworker was using a magnetic drill to drill a steel beam. The drill bit caught his left glove and amputated his left thumb.,1
"An employee was helping to drain a knockout pot containing 65% nitric acid. The drain hose became loose and the employee was sprayed in the face. The employee received burns to the face and eyes, requiring hospitalization.",1
An employee was evaluating a firearm that a customer brought in to sell when the firearm discharged and shot the employee's hand.,1
"An employee tripped over a jack, fell to the floor, and sustained a fractured left wrist that required surgery.",1
An employee's left index finger was punctured and cauterized by a tungsten rod. The employee hospitalized for surgery.,1
An employee suffered heat exhaustion while delivering mail and was hospitalized.,1
"An employee was handing a piece of cardboard to a co-worker when she lost her balance and fell backwards, hitting her head on the ground.",1
"An employee was assaulted by a former employee, suffering injuries to the face. He was hospitalized.",1
"On June 13, 2019, two employees were in an area operating standup forklifts to select product. The first employee struck the second employee's forklift. The second employee's left forearm was pinched and crushed between the two forklifts, requiring hospitalization.",1
"An employee was walking at ground level when he slipped and fell, injuring his head on the concrete floor.",1
"On 06/13/2019, an employee was cutting a piece of flooring tile with a knife when the blade cut his right thumb, causing an avulsion.",1
"A temporary employee was attempting to remove a piece of plastic foam from a foam-cutting machine when the cutter snatched her glove and pulled her left hand into the moving cutter blade, resulting in the amputation of her left middle finger from the first knuckle and a broken ring finger.",0
"On June 13, 2019, an employee was standing on a post peeler machine by the motor watching his two coworkers change out a busted hydraulic hose. His coworkers turned on the machine. After the machine was energized, his right middle fingertip was amputated with bone loss by the machine's moving belt.",0
"An employee was riding a bike to go on patrol. As he was coming around the corner, a gust of wind began to blow off his hat. He used his right hand to keep his hat on and accidentally hit the front brake with his left hand. He then went over the handlebars and fractured the top of his left hip at the socket. He was hospitalized.",1
"An employee was putting a bumper on a car that was on a lift at eye level when a hand tool slipped and struck the employee's eye, lacerating it.",1
"An employee was cutting a metal pipe. The pipe struck the employee's left foot, causing a contusion.",1
"In a postal facility, an employee tripped over the corner of a wooden platform, fell to the ground, and broke her elbow.",1
"An employee was operating a tub grinder when a conveyor fell and hit him, breaking his hip.",1
"An employee was positioning a wooden pallet on top of a stack of steel. The pallet dropped onto a steel coil from about 18 inches up, crushing the employee's right index finger and causing a partial amputation.",1
"An employee was moving a steel box to remove excess molten zinc after it came out of a kettle when the wire holding the box broke and the box fell into the kettle. Molten zinc splashed on the employee, causing second and third degree burns to his neck, chest, and arms.",1
An employee was loading a truck when he fell 52 inches from the flatbed section. He suffered a broken left wrist and was hospitalized.,1
"On June 13, 2019, an employee was kicked in the stomach during a patient restraint procedure. The employee was hospitalized with a left abdominal contusion.",1
"An employee was cleaning up a spill when he slipped and fell on the floor, injuring his right hip.",1
"An employee was installing a piece of sheet metal on a roof when he fell through the 4-foot by 4-foot hole for it. He landed on the concrete floor, suffering two broken ribs and injuries to both legs.",1
"On June 13, 2019, an employee was washing windows at a four-story building and fell approximately 40 feet from the roof, suffering broken ribs.",1
"An employee was climbing down the steps of a pump trailer when he slipped and injured his left knee, resulting in a torn patella tendon.",1
"An employee was removing finished spools from the stranding machine. As he lifted the spool, the end of the wire got caught on the side of the cradle that supports the spool. He grabbed the wire to dislodge it and was struck on the chest by the wire causing a laceration/contusion. He was hospitalized.",1
"An employee was cutting metal parts on a saw. While he was retrieving the parts, the saw lacerated his left index finger.",1
"An employee was using a work assist vehicle to get folded boxes from a storage rack. She was stepping back from the rack onto the wave when she fell to the ground, suffering injuries to the shoulder, ribs, back, and leg.",1
"An employee was repairing an overhead door and installing cable when the cable slipped and struck both of the employee's hands, amputating three fingers.",1
"Employees were installing a precast concrete barrier wall. An 18-wheeler drifted over and struck a piece of equipment that was being used to set a section of the wall. This knocked the wall section loose, and it crushed two of an employee's toes. The toes were medically amputated.",0
"An employee was installing form panels for pouring concrete when the row of panels tipped over and landed on top of him. He suffered several fractured ribs, right knee pain, and a laceration on the lower left jaw.",1
"An employee was grinding meat for burgers when the grinder jammed. As he attempted to unjam it, the stored energy was released and his left thumb was caught in the meat grinder and amputated.",0
Employees were fighting and one employee was injured and hospitalized.,1
"An employee was working on a powerline pole. The employee was installing an equal potential zone while using a cluster bar that attached to the pole. A chain hangs from the cluster bar, which started swinging back and forth after it was attached to the pole. The employee attempted to grab the swinging chain and came into contact with the energized powerline. An entry wound was present on his hand and an exit wound was present on his chest. He was hospitalized with burns.",1
"An employee was removing a filter screen while cleaning a line for a flavor change when hot water sprayed out from the pressurized filter and contacted the employee. The employee was hospitalized with first degree burns to the torso, arms, and upper legs.",1
"An employee was standing on a level surface and was using his hands to guide an iron column, which was being moved by a small tower crane. As he was guiding the suspended column, his finger was caught between a flange of the column and a tie-back cable (for a swing-stage) that was behind him. This resulted in a crushed right index finger and a laceration to the right middle finger. Following the injury, his right index fingertip was amputated at the hospital (from the top knuckle up), and his middle finger required stitches.",1
"An employee was removing line from a trimmer/weedwhacker when he injured his right index finger, suffering a potential fracture.",1
"An employee was operating a tractor when it became stuck in the field. While he was unhooking the chain from the front axle, the steering wheel was inadvertently turned, pinning the employee between the front tire and the tractor frame. He broke 8 ribs and punctured a lung.",1
An employee was securing a jib with a chain fall. His right index finger was caught and crushed between the chain and hoist rail. He was hospitalized.,1
"An employee experienced anaphylactic shock while completing intake forms on a patient in the emergency room, requiring hospitalization.",1
An employee fell from his tractor-trailer and broke his hip.,1
"An employee was operating a saw cutter while cutting a concrete slab (balcony) on the second floor level of a residential home when he slipped and fell approximately 8 feet down to the concrete ground level. He was hospitalized with a head fracture, a spinal fracture, and rib fractures.",1
"An employee was placing a molding machine on two 3-by-4 pieces of wood on the forks of a forklift. When the wood was adjusted, the employee's right thumb tip was caught between the wood and the forks and was amputated.",0
"While walking toward a customer to deliver product, an employee tripped on a concrete step and fell. The employee's right knee struck the ground, and the employee suffered a broken patella.",1
"On June 14, 2019, an employee was getting onto a scaffold to descend to the ground and retrieve more materials. When he stepped onto the unsecured planks, the planks fell off and he fell about 12 feet to the ground, landing on his feet. He sustained a fracture to his lower back and ruptured a lower back disc, requiring hospitalization.",1
"An employee was conducting cleaning services inside a school when she mis-stepped on a step, tripped, and fell on the last step of a stairway. She attempted to stop her fall with her hands and fractured her wrist.",1
"An employee was bitten by a dog on her lower right arm while working on her mail route, suffering a possible infection.",1
"An employee was walking from the back of a warehouse to an office when a bundle of rolled insulation fell and struck her, knocked her down, and rolled on top of her. She suffered a head injury.",1
"An employee was using a trim saw machine to trim boards. While he was clearing clippings from the machine, the saw amputated his right ring fingertip.",0
An employee was walking around the driver's side of a semi trailer to secure the trailer doors when the wind blew the semi trailer door into the employee. The employee sustained a laceration to the head and two broken ribs.,1
"An employee stepped into the floor auger of a grain bin, resulting in the amputation of some toes.  The employee was hospitalized and had surgery.",1
"An employee was attempting to close an overhead door when it closed on his fingers, crushing his fingertips.",1
"An employee was working on a garage/bay door when the ladder he was standing on crumpled beneath him, causing him to fall approximately 8 feet. He suffered broken ribs and a back injury.",1
"An employee slipped and fell 10-12 feet off a picker, landing on the floor and suffering fractures to the skull, collarbone, back, and face.",1
"An employee was working in a bucket changing out a utility pole when an electrical flash occurred, causing burns to the employee's face, neck, and upper chest.",1
"After delivering mail on a rural route, an employee experienced an aggravated heartbeat due to heat stress, requiring hospitalization.",1
An employee was walking when she tripped on her sandals and suffered a broken femur and laceration. She was hospitalized.,1
"An employee was operating a saw when the blade amputated a half-inch of his fingertip, requiring surgery.",1
An employee slipped on water and fell to the floor while walking to get water from a water dispenser where the drip tray had overflowed onto the floor. The employee suffered a right fibula fracture.,1
"On June 14, 2019, an employee was dumping approximately 3 tons of asphalt that was left inside the bed of a dump truck from the night before. The employee raised the dump truck and then exited the truck. While the employee was standing at the rear of the truck, the asphalt broke loose and fell onto the employee, pinning the employee between the pavement and the tailgate of the dump truck. The employee suffered burns, lacerations, broken bones, and the amputation of toes.",1
An employee was moving merchandise with a pallet jack when it ran over his foot.,1
"An employee was operating a boot turning machine when the employee's finger was caught in the machine, resulting in a fingertip amputation.",0
"On 6/14/2019, an employee was watching an apprentice lineman perform work. The employee took control of the work from the apprentice lineman, and grabbed the base of the utility pole. The pole came within proximity of a 69 KV line and an arc occurred, energizing the utility pole. The inside of the employee's right forearm contacted the pole at the time it became energized. The employee suffered superficial burns to the right forearm (just above the glove cuff) beneath the elbow, and burns to both feet.",1
"An employee was guiding a steel header piece that was being lowered by a crane on top of a mold. When the crane set the header down, the employee's right index finger was caught between the piece and the mold. His right index finger was amputated.",1
"An employee pulling nails on a roof fell 10 to 12 feet to the ground, breaking a leg.",1
"An employee slipped and fell to the ground while walking between roof trusses, breaking the left and right wrists.",1
"An employee was on a ladder servicing a cooling unit at a customer site and fell to the ground, suffering a possible fractured back.",1
"An employee was closing the door to an audiology booth and pinched their right little finger between the door and booth, resulting in a partial finger amputation.",0
An employee was attaching a dolly to his lead TRL when he slipped and his left pinky finger was caught between the front dolly and the TRL pintle hook.,1
"An employee was using a pry bar to unload steel from the back of a semi-trailer for a customer when he slipped and fell, hitting his head on a spreader bar. He lost consciousness and suffered blunt trauma to the head, requiring hospitalization.",1
"An employee was cleaning a meat slicer when the employee's fingers contacted the blade, resulting in amputations of the right index and middle fingertips.",0
"An employee was reaching for a hook caught on the side of a carcass with his left hand when his right hand came in contact with the piston of the bone clipper, amputating his right middle fingertip.",0
"On June 14, 2019, an employee installed an adapter on a compressed gas cylinder, then actuated the cylinder. There was a suspected failure in the adapter, and the cylinder struck the employee. The employee suffered fractures to the ribs and shoulder, as well as a head injury.",1
"An employee was loading a bottle of water into a cooler in the back of a work truck when another employee entered the driver seat of the vehicle to move it. When the second employee moved the truck forward, the injured employee fell out of the truck and hit his head on the ground, suffering head trauma.",1
"A part of a boring machine struck a hand tool, sending it flying through the air. It struck an employee in the back and injured the employee's spleen.",1
"While helping a resident out of a wheelchair, an employee slipped and fell to the ground. The employee suffered a broken right wrist that required surgery.",1
An employee was operating a molding press when a hose detached from the mold and sprayed hot oil in the employee's face. The employee suffered burns to the face and neck.,1
"At 11:00 a.m. on June 14, 2019, an employee of Manhattan Construction Company (MCC) and an employee of Centennial Moisture Control were in a yard when a piece of corrugated metal decking fell onto them from about 140 feet above, knocking them to the ground. The MCC employee suffered significant facial trauma and was hospitalized.",1
"An employee was working on a road crew that was replacing asphalt in a closed left lane when a vehicle involved in a high-speed police pursuit entered the left lane road closure area. The speeding vehicle swerved around a state police vehicle stationed at the construction site and struck another vehicle. One of the vehicles struck the employee, who suffered a punctured lung; a ruptured spleen; and lacerations to the right knee, ankle, and wrist.",1
"An employee was repairing a light bulb on a light pole when the employee received an electrical shock, suffering two burns on the right middle finger and one burn on the right pointer finger.",1
An employee was using a pinch-off tool when the tool struck his head/jaw.,1
An employee was attempting to clear a jam inside a dust collector chute when a rotating part in the chute amputated three of the employee's fingertips.,0
An employee was passing out fliers when she fainted due to the heat.,1
An employee was cleaning the inside of an incline auger when the running blade amputated her right middle fingertip.,0
"An employee was punched by another employee and fell onto a hamper, suffering a broken jaw and lost tooth.",1
"An employee was in the freezer, standing on a ladder to cap bins. She fell off the ladder to the ground and fractured her hip. She was hospitalized.",1
"On 6/15/2019, an employee was observing glass-making machines, removing jammed bottles, performing housekeeping, and lubricating equipment when he began feeling weak and dizzy from heat stress. He was hospitalized with dehydration and acute kidney failure.",1
"An employee was getting out of a vehicle and stepped onto a branch, causing her to slip on mud on the street. She fell and injured her left hip.",1
"On June 15, 2019, an employee was using a hoist to lift a finished roll when the employee's left index finger was pinched by the roll, resulting in a fingertip amputation.",0
An employee was cleaning bottles of consumer alcohol with a rag and disposing of broken glass. The employee ingested a 3-millimeter piece of glass and was hospitalized.,1
"An employee was using a 6-foot step ladder to clean a convex mirror when she fell from the ladder, striking her head on the concrete floor. She suffered a fracture of the skull at the base of the head, a broken right shoulder blade, and two brain bleeds in the front of her head.",1
"An employee had just completed replacing the oxygen block in a furnace port. As the employee was walking away, his left pant leg caught on fire. He attempted to extinguish the fire with his left hand, causing his shirt sleeve to catch on fire. He was hospitalized with second and third degree burns.",1
"At 9:45 a.m. on June 15, 2019, an employee suffered a possible hernia while lifting a door onto a dolly.",1
"An employee was at a register when she tripped over a shopping hand basket on the floor, falling to the floor and fracturing her left knee.",1
An employee's head hit an oil change tray as the employee was walking in a lower bay. The employee was hospitalized.,1
"A sanitizing crew was in the picking room and had removed the drain grates in the floor to clean. While the crew was cleaning in the picking area, a maintenance employee entered the picking area. As the maintenance employee was walking to the equipment needing maintenance, he tripped in an open drain. He fell and tried to catch himself, fracturing the radius and ulna of his left arm.",1
"An employee was attempting to clear parts from a belt when his left index finger was caught in the chain and sprocket, resulting in a finger amputation.",0
"An employee was squatting down to pick an order when a pallet jack struck the employee, injuring his right ankle and knee.",1
"An oil rig floor hand was connecting elevators to a lifting sub. When the elevators were lifted, the floor hand's right middle fingertip was crushed between the elevators and the lifting sub. The fingertip was surgically amputated.",0
"An employee was going back to her classroom when she tripped and fell to the floor, suffering multiple fractures to her arm and kneecap.",1
"An employee was teaching another employee how to operate a backhoe. He was standing on the top step by the cab when the other employee hit a rough area. He then fell off the backhoe to the ground, breaking his left upper femur just below the pelvis area.",1
"An employee was pulling out a tea filter holder that still had hot water in it when the water splashed on the employee, burning her face and arm.",1
"Two employees were working to clear trees from powerlines. The tree being cleared had fallen onto the power line, which was angled down due to recent storms. A tree limb had been cut into three pieces, and the injured employee was trying to free the limb from the power line. The tree limb swung and hit the employee's face, causing lacerations from the nose to the lips.",1
"An employee was tarping a truck load and applying plastic between the load and the tarp. The employee became tangled in the plastic and slipped from the trailer, hitting the ground. The employee suffered two broken wrists, a broken left cheekbone, and eye socket damage.",1
"While a confectionery machine was being reassembled, an employee's hand was pinched between the caramel-dispensing part of the machine and the machine frame. The employee's right little fingertip was amputated.",0
"An employee was operating a printing press folder. The employee was jogging the machine to feed the paper back into the folder, after changing out the cutting blades, when his right hand was pulled in. The folder's cutting blade amputated his middle finger and the tips of his index, ring, and little fingers.",0
An employee was repositioning a 55-gallon oil drum when his left little finger was caught between the drum and the enclosed belt conveyor frame. He suffered an amputation to the fingertip.,0
"On June 17, 2019, an employee was receiving a scaffolding piece on the ground as other employees dismantled a scaffold. The well wheel used to manually lower the equipment broke apart, causing the load to fall and strike the employee, who suffered a laceration to the upper left shoulder.",1
"The injured employee asked the skinner operator for a long hook that was hanging over a meat conveyor. As the skinner operator retrieved the hook, the injured employee's right hand became caught in the skinner roller and the blade amputated three fingertips. There are no guards along the edges of the top of the skinner.",0
"While delivering mail, an employee was bitten by a dog on the right knee and left ear. The employee was hospitalized.",1
"On June 17, 2019, an employee was stapling wood together using a pneumatic staple gun. The gun shot a staple into the employee's elbow.",1
"An employee was operating a mill saw. The saw caught his gloves, broke his middle finger, and amputated his left ring and little fingers at the first knuckle.",0
"An employee was helping a forklift operator identify parts to pull for orders. The employee had mounted the right side of the forklift when the operator turned sharply. The employee then fell off the forklift, which proceeded to run over his right heel, cutting the inside of his heel pad.",1
"An employee was dismounting a conveyor after flagging a sensor. Upon dismounting, her left arm was pulled into the equipment, resulting in an amputation.",0
"An employee fell from a trailer hitch to the concrete floor about 3 feet below, suffering fractures to the rib cage, elbow, and hip area. The employee was hospitalized.",1
"An employee was banding foundation blocks. The tier lift came down on his foot, injuring his left fourth toe.",1
"On June 17, 2019, an employee was painting on an elevated platform when the power went out. The employee fell 10 feet 6 inches to the floor and was injured. The employee was hospitalized for facial fractures.",1
"An employee was in a scissor lift, loading it onto a trailer bed. The scissor lift skidded and went down the side of the trailer bed; the employee was ejected onto a paved parking lot. The employee suffered a scraped elbow and a broken left femur near the hip socket.",1
"An employee was cleaning pieces of meat from a poultry skinner. Her hand was caught in the machine, two opposing rubber belts (which rub skin off the meat as it enters the machine) caused an amputation of her left little fingertip, broke the tip of the bone, and degloved the palm side of the finger.",0
"An employee was sitting on top of the middle section of a truss while waiting for another truss to be delivered by crane. The truss broke and employee fell approximately 15 feet to the ground and suffered a compound fracture to the left elbow, a fractured hip, and a fractured pelvis.",1
"An employee tripped on a dolly behind him and fell on the concrete floor, fracturing both elbows.",1
An employee was fixing a tractor when it moved and struck the employee. The employee suffered a left leg injury.,1
"An employee was cutting a block of cheese with a cheese harp when the harp string snapped, causing the employee to fall backward onto the same level. The employee suffered a broken bone in his left hip as a result of the fall.",1
"An employee was operating a walk-behind grass aerator when he became hot, dizzy, and weak, suffering from blurry vision, low blood pressure, and dehydration. He was hospitalized for heat illness.",1
An employee was dropping a 10-inch cast iron pipe into a hole when his hand was caught between the cement wall and the pipe. He was hospitalized with a swollen hand.,1
An employee became dehydrated while picking up residential trash and was hospitalized.,1
"An employee was picking up a spray gun to spray ceiling texture. The gun injected sheet rock material into the employee's right ring finger, causing an infection.",1
"An employee was using a cutting torch to disassemble a metal staircase. The stringer became loose, causing the landing to begin shaking, and the employee lost his balance and fell 9 to 12 feet. He suffered injuries to his head and right shoulder.",1
"An employee was run over by a forklift and was hospitalized, undergoing surgery to the left arm and right leg.",1
"On June 17, 2019, an employee was picking up residential garbage containers when he began to suffer heat-related illness; after being put in the air-conditioned cab of the garbage truck he became unresponsive. He was hospitalized, suffering from kidney failure.",1
"An employee fell to the ground while exiting the cab of a tractor trailer, suffering a broken arm.",1
An employee who was ill inside a moving roll-off container truck fell out of the truck while trying to roll down the window.,1
"An employee was standing on the forks of a forklift approximately 10 feet off the ground when the forklift turned around a corner and tipped over. The employee jumped off the forklift, breaking one ankle and spraining the other.",1
"On June 18, 2019, an employee was attempting to retrieve a dropped pin from the inside of a pin-sitter machine when the machine was activated via the foot pedal. The machine then caused a finger amputation, requiring surgery.",1
"On June 18, 2019, an employee was operating a riding pallet jack. She was thrown from the pallet jack and collided with a rack, suffering a lower lumbar fracture. She was hospitalized.",1
"On June 18, 2019, at approximately 1:30 AM, two employees were blowing out an asphalt hose after loading a barge when the lines pressurized and blew apart, spraying them with hot liquid asphalt. One of the employees was hospitalized with first, second, and third degree burns.",1
"An employee was attempting to remove empty film and jammed candy from the discharge end of a wrapper machine when his right index finger was cut by the machine's crimper blade, resulting in a fingertip amputation.",0
"An employee was trying to place a gearbox/motor unit into place using a pry bar and his hands. 
The gearbox/motor unit was partially in place but did not sit all the way down. The employee tried to feel what was blocking the unit when the unit fell the rest of the way into place and pinched his left thumb, resulting in a thumb amputation at the nailbed.",1
"An employee conducting electrical work was descending a 10-foot step ladder when he lost his balance and fell to the ground, striking his right arm on a metal stud. He was hospitalized with back pain and an arm laceration that required surgery.",1
An employee suffered a right middle finger amputation when a drain cover fell on his hand.,0
"An employee was moving a battery when it dropped and fell on the employee's right big toe, breaking it. The employee was hospitalized.",1
"An employee was cleaning the cab of his truck. As he was climbing down using the cab steps, he lost his balance, fell backwards, and struck the back of his head on the paved ground. He sustained a contusion to the back of the head and bleeding to the back of the brain.",1
"An employee was working 4 to 5 miles offshore on board a utility vessel and helping to retrieve a box core (device that goes to the bottom to scoop sediment) when his fingers were caught in a 24-volt winch, resulting in the partial amputation of his left ring finger.",0
"An employee was using new retraction tool to disassemble an air cycle machine unit. In the process of removing the retaining nut, the retraction tool's thread shaft adapter broke, causing a bubble or burst of hydraulic fluid to rupture at up to approximately 6,000 psi. The fluid cut/lacerated the employee's left hand between the middle and forefingers. He was hospitalized and required surgery.",1
An employee was at a job site helping to unload a truck when the employee became overheated and dehydrated. The employee was hospitalized due to heat exhaustion.,1
"An employee was operating a two-hand control O-ring stretcher. When she attempted to dislodge a stuck O-ring with her finger, the stretcher partially amputated her right middle fingertip.",0
"On June 18, 2019, at approximately 4:10 p.m., an employee was preparing a conveyor system to discharge kiln-dried concrete blocks to the tumbler line. The employee was attempting to correct a misaligned photo sensor when a different sensor eye was covered, causing the machine to cycle. As the machine cycled, the push arm swung out and pinned the employee between the pusher and the block turnover frame. The employee was hospitalized with a pelvic fracture. The machine was not locked out/tagged out at the time of the incident.",1
"An employee was performing short training (bending, squatting, hiding behind barricades) exercises at a firing range when he developed muscle cramps and tingling in his legs. He was hospitalized for a heat related illness.",1
An employee was using a roller to roll a tarp out over concrete when the employee's right ring finger was caught between a push plate and the handle of the roller. The employee suffered a deep laceration to the middle of the right ring finger.,1
An employee was removing a hook from an outfeed table that pulls tubes through the annealing furnace. The hook did not come off the chain and table on its own. The employee noticed the hook still attached and went to unhook the table. The hook and chain were still moving. The employee's right finger was smashed between the hook and chain and the fingertip was amputated.,0
"An employee had been installing solar panels on a roof during the day. As he was installing the last two, his hands cramped up and he was removed from the roof. He then began to have whole-body cramps and he was hospitalized, suffering from heat stress.",1
An employee fell while getting past a 6-foot gate and broke his left ankle.,1
"An employee was loosening up plastic resin on a machine. An air bubble popped and resin got on the employee, causing a burn.",1
An employee was using a motorized pallet jack to load products when she stepped off the motorized pallet jack and accidentally pulled the throttle handle. The pallet jack then backed into her leg and broke it.,1
"An employee was picking tomato stakes from a tomato field when the employee experienced dizziness, cramps, weakness, and stomach pain. The employee was hospitalized due to dehydration.",1
An employee was operating a bandsaw when its blade amputated the employee's left thumb.,1
"An employee was grinding meat in a meat market when his hand entered the meat grinder, resulting in an amputation to the end of his right middle finger.",1
An employee was checking a belt in an air handler. The employee's hand was pulled into a nip point and the belt and pulley amputated three fingertips.,0
"An employee fell to the ground while performing maintenance on a crane, suffering a head injury.",1
"An employee was removing the inside steel pieces of a 91-inch by 91-inch by 6-foot concrete form, breaking the form down. The floor piece of the form (weighing more than 1,000 pounds) fell onto the employee's right side, lacerating his liver and injuring his right kidney and spleen.",1
"An employee was moving a buoy with a forklift when he attempted to move a piece of wood by the buoy. The buoy then rolled and caught his left index finger, resulting in the amputation of 2/3 of the finger.",0
"An employee working on an elevated platform fell 25 feet through the oxygen load opening, landing on the lower level of a basic oxygen furnace. The employee was attempting to arrest flames while tapping steel. The employee suffered multiple fractures and second degree burns.",1
An employee was cutting a board with a chop saw when the blade partially amputated the employee's finger.,1
An employee was clearing a jam in a running conveyor. His left hand was drawn between the belt and the rollers. He suffered three crushed fingers and a burn from the belt that requires skin grafts.,1
"An employee was doing demolition work in a storm drain culvert. As he was adjusting a steel I-beam, the tip of his right index finger was caught between the two pieces of the adjustable beam. The fingertip was amputated.",0
"An employee was working in a de-molding section. While he was walking on the back of the plate of the mold, the tension plate fell off and landed on his legs. His left fibula was broken and tissue was torn in his right leg, requiring stitching. He was hospitalized.",1
An employee was moving a step ladder and his tools from the first floor to the lobby when he fell down a single set of stairs breaking both legs.,1
"On June 18, 2019, an employee suffered three finger amputations while operating a band notcher machine.",0
"An employee slipped and his foot went under a lawnmower, resulting in the partial amputation of his toes.",1
"An employee was walking a family member into a surgical care suite when she tripped and fell, hitting her head on the aluminum door and fracturing her first cervical vertebra.",1
"An employee was disassembling a scaffold and fell to a lower level. He suffered fractures to the left scapula, right forefoot, and right ankle.",1
"An employee was exiting a scissor lift and fell 2.5 to 3 feet to the concrete ground, suffering a broken left wrist and hip.",1
"An employee was operating a trenching machine when it struck an old, unmarked natural gas pipeline. The machine caught fire before the operator could turn it off; he suffered burns to his right hand as he left the cab, as well as a broken right knee and left wrist as he jumped to the ground. He was hospitalized.",1
An employee became dehydrated and suffered heat exhaustion while delivering shingle pallets to a roof.,1
"An employee was moving a safe on a wheeled dolly when the wheel of the dolly ran over imperfections in the floor. The safe then tipped off the dolly and onto the employee's leg, breaking it.",1
An employee was assisting with rigging a 500 lbs. load. The employee was standing by the truck when the load fell onto his foot causing four metatarsal fractures.,1
"An employee was disconnecting a hose when the employee lost control of the hose. The hose ripped the employee's personal protective suit, and the chemical that was coming out of the hose contacted the employee's body. The employee was hospitalized with third degree burns to the lower body.",1
An employee fell approximately 25 feet while making his way down a cell phone tower.,1
An employee was transferring product from a trailer to a tote when the employee was splashed with sulfuric acid on the face and left eye.,1
An employee had been pulling cable and was hospitalized for heat related illness.,1
A temporary employee was trying to clear a jam on a final press machine when his right thumb was pinched by the wood object being moved through the press. The tip of the thumb was amputated.,1
An employee overheated while driving and was hospitalized.,1
"An employee was loading his forklift when it moved and pinned him against a pallet, fracturing his tibia and fibula.",1
An employee reached down to check the lawn mower tire while the mower was running. The lawn mower blade lacerated his left ring finger and fractured the left middle finger that resulted in the amputation of the distal phalanx.,0
"An employee was fabricating metal parts on a brake press when his hand was crushed by the brake press, resulting in an amputated left index finger and three crushed fingers.",0
"An employee was diverting product trays along a conveyor system when his left ring finger was pinched between the conveyor and a stationary metal tray diverter, resulting in a fingertip amputation.",0
An employee was performing construction work when he became lightheaded and vomited due to heat stress.,1
"An employee had been wearing a training suit while instructing law enforcement trainees in personal defense. Early the following morning, he woke with a fever and a severe headache, requiring hospitalization for a staph infection in his leg.",1
"An employee was replacing catalyst parts in the heat and became ill due to heat exhaustion, requiring hospitalization.",1
"An employee was operating a forklift outside the facility to move a  mast weighing approximately 3700 lbs. As the mast was lifted to maximum height to avoid another parked forklift, it shifted to the left and the forklift overturned. The employee suffered a broken collarbone and broken ribs.",1
"On June 19, 2019, two employees were moving an electrical cabinet with a forklift to place in a new control room when the cabinet fell from the forklift and pinned the injured employee's left leg. The employee suffered a fractured tibia, fibula, and femur.",1
An employee became ill after doing an install and doubled over in pain from heat cramps. The employee was hospitalized for heat exhaustion.,1
"An employee was helping correct a malfunction in a trim press, adjusting the limit switch. The machine activated, cycled, and came down on the employee's right little finger, causing an amputation.",0
"On June 19, 2019, an employee was operating a machine that carries shingles onto a roof when the belt came off. As he attempted to set the belt onto the machine's pulley, his right index finger was caught between the pulley and the belt, resulting in an amputation of his right index finger without bone loss. The machine was energized at the time of the incident.",0
"An employee was at a dock operating a high-low forklift when a bulk mail cart (BMC) started rolling towards him.  He extended his right arm in an attempt to stop the BMC and his right middle finger was pinched between the BMC and his forklift, resulting in an amputation to the finger.",0
An employee fell approximately 18 feet from a ladder while performing work.,1
"An employee was using a drill press with a hole saw bit installed, when the bit caught the employee's glove, pulling the employee's left thumb into the bit and resulting in an amputation (from the middle).",1
"An employee was attempting to unclog salt that was damp from recent humid weather. The salt was added to the process through a 10-inch-long pipe with a rotary gate valve at the end. The employee's finger was caught in the turning valve, resulting in an amputation.",0
An employee contracted an infectious parasite while servicing a client.,1
An employee was hooking a front end loader to his tow truck to get it out of a wash pit in a concrete plant. The employee suffered chemical burns to the legs from the 3-foot-deep water the loader was in. He was hospitalized.,1
"An employee was reconfiguring a 1"" airline. The employee's hand was on a 90-degree fitting while a co-worker turned the pipe using an 18-inch pipe wrench. The employee's hand then became caught between the 90-degree fitting and a steel skid, resulting in a fractured left ring finger and nail avulsion that required surgery.",1
"An employee was cleaning a 3-way valve (ball type), using a 10-inch screwdriver to remove process powder. A vacuum hose was attached to the other end of the 3-way valve to suck out the powder removed by the screwdriver. While he was cleaning, the screwdriver became stuck inside the valve. After several attempts to remove the screwdriver from the valve, the employee then placed his hand on the side of the valve to generate force to remove the screwdriver. Once the screwdriver was freed from the valve, the employee's left ring finger slipped and entered the valve. Because the hose was on the other end, an alarm for low pressure immediately triggered the valve to actuate while his finger was inside. As a result, his left ring fingertip was amputated in the nailbed area.",0
"An employee was positioning a flap gate airlock valve. The valve was turned while his hand was on it, resulting in an amputation.",0
"An employee was attempting to move a wet log that was dislodged from a loading platform in a sawmill when the log slipped and crushed the employee's finger against equipment, resulting in an amputation.",0
"An employee was using a rag to clean a machine when the rag became caught, pulling his hand into the machine's chain and sprocket. As a result, he suffered an amputation of his middle finger, a partial amputation of his ring finger, and lacerations to two fingers. The machine was running at the time of the incident.",0
"An employee was removing a transducer when high pressure fluid struck his hand, penetrating his skin.",1
"At 10:00 p.m., on June 19, 2019, an employee was helping a coworker line up a flange prior to bolt-up when he lost his footing and fell to the ground, fracturing his femur. He was hospitalized.",1
"An employee was fixing a chain and unjamming an edger machine when the machine was turned on. The employee's right hand was pulled into the machine, injuring the back of the right hand and the right wrist.",1
An employee was loading boxes onto a pallet when the employee tripped over the corner of the pallet and suffered a broken hip.,1
"An employee unscrewed a platen collar during set-up. The vibration of the thermoformer caused the platen to shift and fall on the employee's finger, amputating the tip (without bone loss).",0
An employee was hammering a concrete nail into the brace of a concrete pad when the concrete nail broke and went into the employee's right eyeball.,1
"An employee was placing a metal plate into a furnace to be heat-treated when he tripped and fell forward, resulting in his hands making contact with the hot metal plate. He suffered burns to the palms of both hands and was hospitalized.",1
"An employee slipped while walking on a wet floor and experienced a hip fracture, resulting in hospitalization and surgery.",1
An employee was mounting/installing a motor into place when the motor shifted and his finger became pinched between the motor and the wall of the machine. He broke his left index finger.,1
An employee was on a track ladder stocking merchandise when the employee missed a step and fell approximately 6 feet from the ladder to the concrete floor. The employee was hospitalized and required surgery for a right ankle injury.,1
An employee was installing an air conditioner at a customer's home. He was using a set of needle-nose pliers. The pliers slipped off from the object they were grasping and the employee's fist hit his left eye. He sustained a laceration to the globe of the left eye.,1
"An employee was disassembling a guardrail on a rig floor when his safety harness became caught on the guardrail and the weight pulled him down to the ground, breaking his left leg. He was hospitalized.",1
An employee was climbing a ladder and fell off the ladder 4-5 feet fracturing the left hip and heel.,1
"An employee was stacking boxes on pallets at a loading dock when a forklift struck his left foot, breaking several tarsal bones.",1
"An employee was dumping trash when he lost his balance, fell off the loading dock (approximately 4 feet), struck the concrete floor, and broke his left tibia. He was hospitalized for surgery.",1
An employee was burned while performing underground installation when the cable was inadvertently energized.,1
"An employee fell 8 feet from a scaffold while setting a roof on a modular home, suffering a broken hip.",1
An employee was using a nail gun when a nail ricocheted off another nail and impaled the employee through the tongue and into the roof of the mouth. The employee was hospitalized.,1
A garbage collection crew was on its way to a landfill when one of the employees became ill with cramps and started sweating. The employee was hospitalized due to heat stress and dehydration.,1
An employee was sweeping a curb when his left foot was run over by a reversing mini excavator. His left foot broke.,1
A temporary employee was using an upcut saw when the blade amputated four of his fingers.,0
An employee was installing bracing on the edge form as the crew prepared a bridge for a deck pour. The employee began to feel hot and thirsty and then fainted. He was hospitalized for heat stress.,1
"An employee slipped and fell on the wet grass and mud while walking to her car, fracturing her foot/ankle.",1
An employee was bitten on his left finger by a venomous snake and sustained effects from the venom.,1
"An employee was working in the yard when it began to hail. He was running for cover when he ran into the back of a truck, sustaining fractures to the face.",1
An employee was struck in the face by a rigging hook.,1
An employee on a commercial roofing job was gluing an adhered membrane when he stepped backwards and fell approximately 20 feet through an unguarded skylight opening in the roof. He fractured his pelvis.,1
An employee became light-headed due to heat and missed his step on a rebar mat. His left leg went through the rebar mat and his left knee sustained a cut.,1
"An employee was assembling a shutter when his right thumb was struck by a punch press, resulting in a thumb contusion.",1
"On June 20, 2019, at 6:11 p.m., an employee was attempting to remove a gaylord box on a pallet from a flatbed trailer when the corner of the box tore, knocking the employee off balance. The employee fell about 5 feet to the concrete floor and broke three ribs.",1
"An employee was harvesting peas when his foot was caught between a combine frame and a hopper, fracturing his foot.",1
"An employee was checking the tension on an exhaust fan belt when his finger was caught between the fan's belt and pulley, injuring his fingertip.",1
"An employee was manually catching a carcass that went down the incorrect rail line. The employee caught the carcass before it passed a gate and signaled a nearby employee to shut down the line to allow the carcass to be pulled backwards and moved onto the correct rail. During this process, the carcass fell off the rail system and onto the employee's leg, fracturing a shin bone.",1
"An employee was working near the edge of a concrete slab preparing a skip pan to be removed from the building. The employee fell 10 feet when a skip pan that was on a cart rolled off the side of the first level of the building. The employee suffered a broken nose, three dislocated fingers on the right hand, and a right front hematoma.",1
"An employee fell from the deck of a trailer, suffering injuries that required hospitalization.",1
"An employee slipped and fell while taking the trash out, breaking the L1 vertebra.",1
An employee was changing a tire on a company truck with a bottle jack when the jack started to slip. Another employee pulled the injured employee out from under the truck before it fell off the jack. The trailer hitch on the truck struck and broke the employee's left eye socket and lacerated his nose.,1
"An employee used a glass cleaner chemical to clean her eye glasses. When she put the glasses on her face, she had an allergic reaction.",1
An employee was digging a trench for a new water service line when they became short of breath and had chest pain. The employee was hospitalized with a collapsed lung.,1
"An employee was on a ladder installing a canvas cover for a customer when he fell off the ladder and hit the ground, breaking his ankle and wrist.",1
"A low impact collision occurred when a skid steer backed into a buggy. During impact, the injured employee suffered a fractured fibula, requiring hospitalization.",1
An employee was walking in the pharmacy when she tripped on an anti-fatigue mat and fell fracturing the right humerus.,1
An employee slipped and fell on her knee in the deli department. She fractured her kneecap.,1
"An employee was struck by a company vehicle while taking out the trash, suffering a knee injury.",1
A firefighter had been taking a running test and suffered either heat exhaustion or heat stroke.,1
An employee was trying to release the brake on the engine twister of a compactor bailer using a crescent wrench. The twister motor spun out and the wrench struck the employee's right hand causing an injury that required surgery.,1
A temporary worker was walking in a warehouse and was struck by a forklift. The forklift ran over his left foot resulting in amputation of two toes.,1
"On June 21, 2019, an employee was visually inspecting product packaging seals on a conveyor. He went to grab a suspect package with both hands when his right pinky finger became stuck in the conveyor belt webbing, resulting in an amputation of tissue from the distal phalanx (nailbed to tip).",0
"An employee was closing his tool box when it shut on his finger, resulting in an amputation of the skin on his fingertip.",0
"An employee was approximately 1 foot high on an uneven surface, removing the cross-over pin from a casing collar, when the employee slipped on the uneven surface and fell to the ground. The employee fractured the first four vertebrae.",1
An employee was repairing the feed rail on a strapper machine when his hand was struck by the pendulum and rotating assembly of the strapper. He suffered lacerations to his right hand and a fractured right pinky finger. He was hospitalized.,1
"An employee was working on a four-step step ladder repairing a pane of glass over a door frame. While descending the ladder, he missed a step and fell backwards into a corner wall. The employee was hospitalized for back pain and tingling in his legs.",1
An employee was sweeping around a cluster cutter. The machine was dropping some beans on the floor. The employee tried to attach a deflector to the running machine to keep the beans from falling onto the floor. His right middle finger contacted the sickle bar on the machine and a small piece of the side of his middle fingertip was amputated.,0
"An employee was helping a driver unchain a load on a haul trailer. The load weighed approximately 20,000 to 30,000 pounds. The trailer was lowered onto the employee's feet fracturing the employee's toes.",1
"An employee was making deliveries when he began to experience signs of heat-related illness, including feeling lightheaded and weak. He was hospitalized due to dehydration.",1
"While descending from a forklift, an employee was caught by the moving parts of a conveyor and suffered a leg fracture.",1
Two employees were moving parts from one area to another area for cleaning. The equipment was on a cart and the non-injured employee slipped causing the piece of equipment to shift and pinch the other employee's left middle finger between the equipment and the cart. The fingertip was amputated.,0
"An employee was setting up a tube to be bent in a machine. As the employee reached for a dropped tool, a finger was caught in a clamp resulting in an amputation injury.",0
"On June 21, 2019, an employee was working on his route for at least 5 hours and started experiencing cramps. The employee continued driving for approximately two hours alongside a supervisor who was delivering the packages to the clients. The employee was later hospitalized due to heat exhaustion and was diagnosed with a muscle injury.",1
Bleach was mixed with acid that resulted in a chemical reaction and a cloud. An employee inhaled a chemical mixture and was hospitalized.,1
"An employee was using a heat sealing gun powered by propane when he experienced asthmatic symptoms, including shortness of breath and slight disorientation. He was hospitalized.",1
"An employee tripped and fell to the ground while walking towards his motorized golf car, fracturing his hip and requiring hospitalization.",1
An employee was attempting to change out rubber belts on a fine screw system when he slipped and fell from the fine screw system approximately 10 feet to the concrete floor. The employee was hospitalized for contusions and lacerations to the jaw and shoulder.,1
"An employee was trying to dismount the operator seat of a boom truck when he lost his balance and fell approximately 6 feet to the ground, landing on his back. He was hospitalized with six fractured ribs, lumbar vertebrae chipping, and a slight puncture of his left lung.",1
"An employee was removing narcotics from a safe when the steel door closed on her finger, resulting in a right ring fingertip amputation.",0
An employee was removing fiber from beneath a machine when their right hand was caught in the rotating roller.,1
"An employee and his coworker were lowering a 10-foot long, 3-inch conduit steel pipe to be installed at the ceiling part of the tunnel when the employee's right pinky finger was caught between the end of the pipe and a fixed ladder located at the west wall of the tunnel. He suffered the amputation of his right pinky fingertip without bone loss. Leather gloves were worn at the time of the incident.",0
An employee slipped and fell on water on the floor while washing the dishes in the kitchen area. The employee suffered a hip fracture.,1
"An employee was following up on preventive maintenance when a pressured pipeline exploded. As a result, the employee was hospitalized and suffered a leg amputation.",1
"An employee was on an 8-foot step ladder using a saw to cut sheathing for fireplace pipes and a firestop when he stepped onto a piece of wood that was not load bearing and fell to the ground level. He injured his head, left hand, and ribs.",1
An employee's left ring finger was caught and crushed in a door frame.,1
"On June 21, 2019, at 11:30 a.m., an employee's right index fingertip came in contact with a sharp object while threading paper into the two-fold napkin machine causing an amputation injury.",0
"A temporary employee was operating a press brake machine to form a piece of aluminum. As the employee engaged the press brake, the ram of the press brake crushed the employee's fingers on both hands. The employee sustained partial amputations to four of his fingers.",0
"An employee was checking/inspecting the hose to a trencher that was parked over a pit when he fell into the floor of the pit, suffering broken ribs.",1
An employee was struck by a service van in the parking lot resulting in a broken femur.,1
An employee was performing paving work and was pinned between the paver the employee was standing on and a roller machine. The employee suffered a fractured pelvis.,1
An employee was working on a modified scaffold preparing to install an I-beam and fell approximately 9 feet to the concrete ground. The employee suffered a head and back injury.,1
"An employee was pulling pipe when the employee became ill, requiring hospitalization for possible heat stress.",1
An employee was using a scoop to clean grit from a lube box on a draw machine when his gloved left hand was caught by a running wire. He suffered a left middle finger injury and a left ring fingertip amputation.,0
An employee was shocked while working on an AC unit and suffered a brain bleed.,1
An employee slipped on a trash can lid while walking in the deli department and fell resulting in a fractured hip.,1
"A maintenance employee was completing work on a metal shaft that was in a milling machine. The employee turned the milling equipment on and was polishing the end of the rotating shaft with a piece of emery cloth. During the process, his glove or the emery cloth wrapped around the rotating shaft, pulling his hand onto the shaft. He suffered a dislocation to his left little finger, as well as an avulsion and partial amputation to a left distal fingertip.",0
"While exiting the passenger side of a truck, an employee mis-stepped and fell 2 to 3 feet to the ground, fracturing a femur.",1
"After welding from 6:00 a.m. to 7:30 a.m., an employee suffered from heat-related illness.",1
"In the facility shop area, an employee was overcome by chemical vapors. The employee experienced shortness of breath and was hospitalized.",1
"An employee was placing jars into a cashier's safe. Her left middle finger was caught in the closing safe door, amputating the fingertip to the knuckle.",0
An employee was repairing a front load vehicle in the shop when a build up of compress natural gas (CNG) that was leaking from the regulator or the vehicle ignited and burned the employee's chest.,1
"On June 22, 2019, an employee stocking merchandise was found laying on the platform of the order picker he was using. He suffered head injuries.",1
An employee was cutting sirloin steaks on a bandsaw and lacerated a finger and a knuckle bone.,1
"An employee was troubleshooting and performing maintenance to the limit switch on a casting machine trough. The trough became energized causing the trough (and the attached chute) to turn over and strike the employee in the head/neck. The employee was then pulled under the trough. The employee suffered broken ribs, a broken chest plate and a punctured lung.",1
"An employee was preparing  to replace wires in a manhole. As he was slicing a cable, the knife slipped out of his hand and cut his finger at the second joint where the finger bends, resulting in a pinky finger amputation.",0
An employee was bitten on the left thumb by a snake while picking up valves to discard them.,1
An employee was carrying a pallet rack upright and went to stack it on top of the forklift forks. The employee's right pinky finger was pinched between the pallet rack and the forklift forks resulting in an amputation injury.,0
An employee fell 4 feet from a ladder to the concrete ground while pulling a boxed lawn mower down. The employee suffered head and brain injuries.,1
"An employee was working on a water well when he was caught in a winch line and fell, fracturing his ribs.",1
"An employee was moving a cooling fan from one section of the plant to another when the employee fell onto the concrete floor, suffering a lumbar fracture.",1
"An employee was working at a customer's home, replacing an aerial drop. His ladder was on the strand approximately 15 feet above the ground. As he began to descend the ladder, the strand shifted, causing the ladder to shift, and he fell about 10 feet to the ground. He suffered a bruised rib and liver.",1
"On June 22, 2019, an employee was descending the ladder of a 20-foot container when a 20-pound metal top plug swung and struck his head. The top plug was connected via rigging wire to a cargo vessel's aft crane. He sustained a contusion with a 2-inch cut above his left eyebrow, requiring hospitalization.",1
"An employee was observing a chipper repair when he was shocked and received electrical burns to his legs and feet, requiring hospitalization.",1
"An employee was inspecting a roof for storm damage when the employee fell to the ground, suffering elbow, rib, and pelvic fractures as well as a punctured lung. The employee was hospitalized.",1
An employee was trying to fix malfunctioning saw equipment when the saw blade cycled on and lacerated the employee's left upper arm and elbow. The saw was unguarded at the time of the incident.,1
"On June 24, 2019, at 1:20 p.m., an employee and coworker were attempting to install a transverse compartment box weighing approximately 60 pounds in the back of a cab when the box slipped out of the employee's hand. The employee's left index finger was then pinched between the box and the wall of the cab, resulting in a fingertip amputation.",0
"An employee was applying hot asphalt to material layers. As the employee moved toward a parapet wall to cut a roll of felt, the employee slipped and fell forward. The employee's hand then entered the mop cart that contained the hot asphalt, causing third degree burns to the right hand and wrist.",1
"An employee was welding on a newly fabricated fuel tank when a flash fire occurred. Residual fumes in the tank ignited and flames exited the tank opening, causing burns to the employee's face and chest.",1
"An employee was troubleshooting a noise on a conveyor. Noticing some oil dripping off the chain as it ran, he reached to stop the machine; the chain caught the rag he was using and pulled his left ring finger into the chain, causing the amputation of the fingertip.",0
"An employee was riding an electric pallet jack selecting cases for orders. He turned into an aisle and collided with a parked forklift. His right foot was caught between the two forklifts, amputating his right middle toe.",0
"An employee was using a cart to transport a full liquid nitrogen dewar when the liquid nitrogen dewar slipped/shifted position on the hook holding it in place. The employee's right middle finger was then crushed between the dewar and the cart, resulting in a fingertip amputation.",1
"On June 24, 2019, an employee was operating a CNC mill when the employee's glove was caught by the tooling, resulting in the amputation of the left-hand ring and middle fingers.",1
"An employee bent down to pick up a small section of rebar so a backhoe operator would not run over the rebar and puncture a tire. When the employee stood upright and started walking, he tripped on a small object, causing him to fall and land on his right shoulder. He was hospitalized due to a right shoulder fracture.",1
"An employee was delivering trusses from a tractor trailer. He tilted the truck bed to dump the trusses and went to the back of the truck to see if they had come off. He walked back to the cab and had his hand on the trailer when the trusses began to slide off. His finger was caught between a truss and the roller at the edge of the trailer, resulting in a right index finger amputation.",0
"An employee was working on a step stool. When she stepped down, she mis-stepped and twisted/fractured her left ankle.",1
"An employee fell from a ladder to the concrete floor after losing his footing, fracturing five vertebrae, his ribs, and sternum.",1
"An employee was sandblasting a steel bridge beam when he tripped on a beam behind him and fell with the sandblaster in hand. The sandblaster's deadman switch was tripped, but a residual amount of media made contact with and abraded the employee's torso area.",1
"On 6/24/2019, an employee was using a 4-inch blade scraper to remove vinyl from a store fixture when the scraper cut the employee's left hand, causing tendon, nerve, and artery damage that required hospitalization.",1
An employee was pushing wet corn meal down into the throat of a twin screw cooker with his left hand when his fingers were caught in the ingoing nip point of the twin screws. He suffered amputation injuries to four fingers (excluding the thumb) on his left hand.,1
An employee was exposed to fumes from solvent/adhesive that entered the building's air handler as a result of roofing contractor activities. The employee was hospitalized with back pain from coughing and other respiratory ailments.,1
"An employee slipped on brake fluid located on a convenience store floor and suffered a broken hip, requiring hospitalization and surgery.",1
"An employee stepped into a hot water drain while cleaning, suffering second degree burns to the left foot.",1
An employee was running terminals through a press machine when a terminal became jammed in the press. He was attempting to unjam the press when it was activated via the foot pedal. The press then partially amputated his left index finger.,1
"Hot laminate splashed onto the back of an employee's head, arm, and hand.",1
"On June 24, 2019, an employee was on a flat roof checking an HVAC leak. As he was descending from a fixed ladder without a cage, he fell to the ground. The building's height is approximately 20 feet. He sustained several rib fractures and a head wound, requiring hospitalization.",1
"An employee slipped while stepping off a flatbed truck, fell to the ground, and landed on his side, breaking his wrist.",1
"An employee tripped over a patient blanket warmer in a clean linen storage room and fell to the floor, breaking her leg.",1
An employee was working in the extruder area preforming purging activities when the employee became injured by the material compound and sustained burns to the left side of the face and right wrist. The employee was hospitalized.,1
An employee was threading pipe that was chained to a winch when the chain lurched and caught four of the employee's left-hand fingers. The employee suffered four broken and de-gloved fingers.,1
An employee was standing in the parking lot when a truck backed up and struck him. He was hospitalized with a skull fracture and broken ribs.,1
An employee was walking down a hallway to use an office printer when she tripped on the carpet and fell to the floor. She hit her head and fractured her left hand and wrist while trying to catch her fall.,1
"An employee was using an overhead crane to lift 25 pieces of 1/8"" x 10"" x 20 long flat bar material to block it for loading onto a tractor trailer. During the blocking process, the employee was installing the wood block when the chain in the overhead crane slipped out due to the bow of the material at the lifted height. The 25 pieces of material fell, smashing the employee's left gloved thumb between the wood block and the material. When he removed his hand, his thumb tip was amputated.",0
An employee was performing a repair on a downed utility line. The utility line arced and caused third-degree electrical burns to his left arm and left side of the back.,1
An employee (an assistant utility operator)was  removing ash build-up and cleaning at the Metals Recovery Systems (MRS) building in high ambient temperatures. The MRS building houses an incinerator and it is made completely of metal materials. The employee experienced heat exhaustion and was hospitalized for severe dehydration.,1
An employee was climbing into a quad axle dump truck cab when he slipped to the ground and suffered broken ribs.,1
"An employee was working on an extension ladder 10 to 12 feet from the ground. Upon descending, his foot was caught in a ladder rung and he fell to the ground, injuring his hip and right foot. He was hospitalized.",1
"An employee was cutting a 24-inch concrete pipe with a cut-off saw when the saw kicked back and struck his head, causing a concussion and jaw fracture.",1
"An employee's wedding ring and finger were caught on a hopper's stationary J-bolt while the employee was climbing down a ladder, causing a partial amputation of the finger.",1
"On June 24, 2019, an employee working on a shear suffered a crushing injury/amputation of the left index finger.",1
"An employee was cutting T-beams with a cutting torch when the employee's pants caught on fire possibly due to a piece of molten slag, resulting in second and third degree burns to the employee's inner thighs.",1
"An employee was carrying a bucket of plastic waste when she stepped in a spot of oil and slipped backwards. She braced herself with her right arm, and when her right palm struck the concrete floor, she sustained a right wrist fracture.",1
"An employee was hand carrying a piece of sheet metal when it fell and severely lacerated his forearm, requiring hospitalization and surgery.",1
"An employee fell approximately 30 to 40 feet out of a scissor lift while painting, hitting the ground and suffering broken bones.",1
"An employee was operating a tractor with a pull-behind mowing deck when a stick became caught in the mowing deck. As the employee attempted to remove the stick, the employee's right ring and pinky fingertips were amputated by the moving belt and pulley.",0
An employee was chopping bacon when the knife amputated the tip of his thumb.,0
"An employee was climbing up a 10-foot ladder when he lost his balance and fell to the ground, injuring his left wrist and right eye.",1
"An employee was setting up a hand-operated coil punch machine. Her index finger was in the area of the clamp when the machine was activated via the foot pedal. The clamp then came down on her left ring finger, resulting in a finger amputation.",0
"An employee was cleaning the hydraulics on a macaroni press. The machine started and crushed the employee's arm and hand, breaking two bones. The machine was not locked out at the time.",1
"An employee was climbing the upper portion of an extension ladder when the ladder slipped. The employee then fell 8 feet to the ground, suffering fluid in the lungs.",1
"On June 24, 2019, an employee was guiding a steel pipe into a pipe clamp to marry it to another piece of pipe when the pipe moved unexpectedly, pinching his right pinky finger and causing an amputation.",0
"An employee went out to the parking lot to help gather loose carts as a thunderstorm was approaching when a strong gust of wind blew the employee down. The employee's face struck the ground, requiring hospitalization.",1
"On June 24, 2019, an employee was hooking up carts to his tugger when he tried to turn around and lost his balance, falling to the floor. He suffered a non-displaced fracture to his right hip, requiring hospitalization.",1
"An employee was adjusting the belt on a slicing machine. The employee went to step up onto the platform, missed the step, and fell to the concrete ground. The employee was hospitalized with a broken lower leg.",1
"An employee was welding material when the material fell on his finger, causing a traumatic amputation of the distal portion of the phalanges .",0
An employee experienced a severe allergic reaction while sitting in the grass during a break.,1
"An employee was driving a four-wheeler. As the employee was leaving the dirt parking lot, the vehicle's tire caught the edge of the concrete. The vehicle tipped and the employee's right foot was caught and twisted between it and the concrete ground. The employee suffered a broken ankle.",1
An employee was closing the trailer bay door while operating a dock jeep and got his head stuck between the safety bars of the dock jeep and the trailer bay door. He suffered multiple facial fractures and a right temporal intracranial skull fracture.,1
"An employee was burned by steam, hot water, and a caustic cleaning chemical while disconnecting a pipe during a clean in place (CIP) process. The employee was hospitalized with second and third degree burns.",1
An employee was using a band saw to cut meat and amputated his left thumb.,1
"An employee was delivering a load of ready mix concrete to a location. The employee climbed on a silo's fixed ladder to adjust the customer's airline when the line came loose and startled the employee, who fell off the ladder and landed feet first. The employee suffered an ankle fracture.",1
"An employee was preparing for the second job of the day, which consisted of putting up fencing when he experienced heat stress due to dehydration. He was hospitalized.",1
"An employee was operating a loader with a grapple attachment to unload tree logs from a truck when he noticed the temperature indicator light flashing. The employee turned off the loader and waited a few minutes to let the engine cool off. Next, the employee started to remove one of the radiator caps on the loader. As he started removing the cap, hot water and steam released from that area, striking the employee. He sustained third degree burns to his left wrist, left arm, and left side torso.",1
An employee suffered an amputation to several fingers on both hands while operating a press brake.,0
"While walking across a parking lot, an employee tripped over an ergonomic mat that had been placed over a drain hole. The employee fell to the ground, suffering a broken hip.",1
An employee was hospitalized for heat stress  while collecting waste.,1
"An employee was attempting to remove a metal wedge from a tall tunnel boring machine when pressure from the equipment caused the wedge to strike the employee's face, injuring the right cheek and nose.",1
Two employees were moving a 2-inch iron pipe to their acid pump truck when the injured employee's right ring finger was caught between the pipe and the pipe rack it rested on. He suffered an open fracture to the fingertip.,1
"An employee was using a jackhammer when it jumped back on his big toe, lacerating and breaking it.",1
"On June 25, 2019, at approximately 7:30 a.m., an employee was filling a hopper full of sand when the auger at the bottom of the hopper amputated the employee's right index finger.",0
An employee injured their left leg with a nail gun.,1
An employee was fixing a leak under a break room sink when the employee was shocked and burned by 110 voltage. The employee recoiled and hit their head. The employee was hospitalized.,1
An employee was working under the front of a truck when another employee got in the truck and backed up over the employee. The employee suffered a fractured right hip and pelvic area.,1
An employee was emptying a waste container that was elevated on a forklift into a dumpster. He fell six feet to the ground below and broke an ankle.,1
An employee operating a powered industrial truck fell from a loading dock.,1
"An employee was walking through the production area, tripped on plastic banding that was lying on the ground, fell and broke her hip.",1
"An employee was recovering items in the men's department after the store was closing when she slipped on water on the floor, fell and fractured her right leg.",1
"After an employee removed an obstruction from a box loader machine, the pusher arm returned to its home position and caught the employee's forearm, resulting in a forearm laceration and tendon damage.",1
"An employee was hooking up air lines on a trailer when the employee's heel became caught on a buffalo box (curb box). The employee then fell backwards onto a fire hydrant, fracturing the lumbar vertebrae.",1
An employee was attaching a casing ring tool to an overhead crane when the employee's left middle finger was caught between the hook and the pad eye amputating the finger pad.,0
An employee was working in an aisle way filling an order when he was struck by a narrow aisle rack truck. He was hospitalized with rib and pelvis fractures.,1
An employee was tightening a guy wire in proximity of an energized line and received an electric discharge causing burns on the left leg and right arm and hand. The employee was hospitalized for surgery on the arm and leg.,1
"On June 25, 2019, an employee was repairing a machine that moves pipes (36 inches in diameter, 1/2-inch thick, and 40 feet long) from a set position to a skid position. He was welding on a hydraulic cylinder clevis that holds the cylinder to the machine. When he moved the machine arm, it triggered the automated car to deliver a pipe to the machine. Seeing that a pipe was coming toward him, he jumped out of the way and landed near a skid pipe. He fractured his left foot and was hospitalized.",1
An employee was operating a bagging machine at a cereal plant. The machine's jaws (which shut and sealed bags) caught the employee's left index finger and amputated it.,0
An employee was going up an escalator from the second floor to the third floor when she lost her balance and fell backwards to the second floor level. She was hospitalized with a fractured spine and arm scrapes.,1
"An employee was checking (from an 8-foot A-frame ladder) the inside of an asphalt drum through the chute's opening to make sure there was no clogging. As he was descending from the ladder, his feet became tangled on the fourth rung and he fell backwards about 3 feet to the gravel floor. He injured his left ankle and lacerated the back of his head, requiring hospitalization.",1
"An employee was moving a piece of debris from a motorized chain and steel pan when a piece of lumber struck him in the chest. He suffered a left rib fracture, right rib fracture, left transverse process fracture, left scapula fracture, and left collapsed lung.",1
"An employee was working on the flat roof of an elementary school and fell approximately 8 feet to the ground below, suffering fractured ribs that required hospitalization.",1
An employee was working on a high-power electrical line when he made contact with a hot line. He received an electric shock that entered through the arm and exited through the stomach.,1
An employee was opening a 150-pound 5-foot by 3-foot metal hatch on a ship while standing on a 6-stair inclined stairway. The hatch fell on the employee and fractured his wrist and T6 vertebra.,1
An employee was assisting in the removal of a monomer pump bowl when he was sprayed with hot monomer (a slurry of PET plastic) and sustained a second degree burn to the lower face.,1
"An employee was running a table saw and pushed the material through the saw. After the material was through the saw, his thumb contacted the blade. His left thumb was amputated below the knuckle.",0
"An employee was changing out a welding head when it slipped and fell on his left hand, resulting in a partial amputation of his third left digit.",0
"An employee was driving a forklift to a charging station. As the employee was backing up the forklift to park it at the charging station, it struck a wall and the employee's right leg and foot were crushed between the wall and the forklift.",1
An employee was sealing a gas furnace exhaust pipe on a two-story roof. The employee fell off the roof and broke a rib and bruised a leg. The employee was not wearing fall protection at the time.,1
"An employee was helping to set up furniture in a conference room when a cart tilted and landed on the employee, causing an L1 fracture.",1
"A maintenance employee was attempting to loosen a bolt with a wrench and a sledge hammer. As he swung the hammer, he struck his left index finger, fracturing his fingertip.",1
"An employee suffered a heat-related illness, including cramping, after being exposed to excess heat while operating a wood chipper.",1
An employee was walking to her car in the parking lot at the end of her shift. She tripped on an uneven surface and fell breaking a rib.,1
An employee was walking to the truck and was struck on the right side of the face with the bucket of a front end loader. The employee suffered a facial laceration that required surgery.,1
An employee was cutting trim work with a power miter saw. The saw cut his hand.,1
"An employee was using a power washer to clean heavy equipment when high-pressure water from its nozzle lacerated the top of his right foot and injected dirt and water into the foot. The employee was hospitalized, requiring surgery.",1
An employee was assembling a wire line gun. His finger was pinched between the gun and a workbench causing an amputation to his right ring finger.,0
An employee was moving a mobile scaffold vertical lift that was approximately 800 pounds. It fell back on the employee causing a fractured left ankle that required surgery.,1
"After picking debris up outside between 8:00 a.m. and 4:30 p.m., a temporary employee became overheated and was cramping up due to heat exhaustion.",1
An employee's right foot was caught between the ground and the outriggers on a magnet crane. The employee's toes were fractured.,1
An employee was repairing a storage rack and suffered a partial amputation to the distal phalanx of the right index finger.,0
An employee was getting ready to leave for a jobsite in the morning and needed to put something away in his car when a stranger approached him and hit him in the head. He suffered a cracked skull and bleeding/swelling on the brain.,1
"An employee was changing the wire on a cheese harp when the wire snapped, hitting the employee in the eye.",1
"An employee was attempting to align the chain and dog ears of a component cyber saw when the spinning saw blade flicked his hand towards the blade teeth, causing an injury that resulted in a thumb amputation. The saw was locked out at the time.",0
"An employee suffered a nose bleed and dizziness while working on a vertical machine, possibly due to coolant exposure. The employee was hospitalized.",1
An employee was rolling backer plates using a 5' plate roller. Their glove was caught between the bottom roller and the underside of the plate resulting in amputation of the right index fingertip.,0
An employee fell while climbing a stairway and broke a knee.,1
An employee was unloading a flat bed truck. He slipped off the truck and fell to the ground breaking the left ankle.,1
"An employee was delivering chemicals and removing transfer tubing at a bulk chemical storage tank when residual peracetic acid reacted with an unknown substance, causing off-gassing. The employee was hospitalized with a respiratory injury.",1
An employee was exiting a racking aisle on a reach truck and collided with another employee in the main aisle traveling on a walkie rider. The employee suffered a contusion fracture to the hip.,1
"On June 26, 2019, an employee reached into an electrical cabinet and received a shock injury to the arm, requiring hospitalization. The cabinet was energized at the time of the incident.",1
A maintenance employee was removing a conveyor belt. The employee performed lockout/tagout and removed the guard from the V belts and pulley on the side of the head pulley. The employee then began to manually move the V belts over the pulley. His left pinky and ring finger were caught  between the V belt and pulley resulting in amputation of the top 1/4 of the employee's left pinky finger.,0
"An employee was hitching a trailer to a truck when the employee's left pinky finger was pinched between the trailer and the ball of the hitch, resulting in an amputation.",0
"An employee was standing on a third floor fire escape balcony while moving trash debris from an inside apartment unit when the balcony gave way, sending him to the ground below. He suffered head, neck, and knee injuries.",1
An employee was performing maintenance on a MCC bucket. The fuses went phase-to-phase and shocked the employee. The employee suffered first and second degree burns to the right forearm.,1
"An employee was exiting his truck. As he began to descend the steps, his foot missed a step and he fell to the ground, injuring his head.",1
"An employee was clearing product from the bottom of a load-out hopper. The product was not flowing correctly from the hopper, so the employee tried to remove any obstructions. The electrically driven slide gate valve then closed on and crushed the employee's right forearm, fracturing it.",1
"An employee was assembling shoring to prep for a concrete pour when the employee fell from an approximately 40-inch high platform to the concrete below, breaking the left ankle. The employee was hospitalized and had surgery.",1
An employee was in a forklift lift cage (man basket) replacing a piece of metal siding. The employee fell out of the man basket 8-10 feet and fractured his right arm. He also sustained a cut on the forehead.,1
An employee was setting up hoses and a sprayer to spray coat a roof. He fell 30 feet off the roof and fractured bones.,1
"An employee suffered burns to both hands and forearms, the face, and neck, when an arc flash occurred as he opened a 480-volt electrical panel door.",1
"An employee was working outside around noon, putting up a satellite dish outside a house, when he started feeling dizzy and nauseated. He came off his ladder to stand on the ground and was walking to a van to sit in the shade and drink water when he passed out. He was hospitalized for possible dehydration.",1
An employee was cleaning a fryer when hot oil from the fryer splashed onto and burned his right foot.,1
"An employee was using a vertical belt sander to smooth the edges of a 3-inch by approximately 14-inch piece of steel. The employee used his hands to tilt the back end of the piece of steel upwards in order to sand it at one end when the belt grabbed the piece of steel, causing his left index finger to be caught between the belt and the piece of steel. His left index fingertip was amputated.",0
"An employee was walking toward a container and stepped on a lock bar that was propped up against a container. The lock bar struck the employee in the head. The employee then walked away and fell backwards, hitting their head on the concrete floor. The employee suffered a hairline fracture to the skull.",1
An employee was unloading a sign trailer and disconnecting a sign from its travel supports. The employee's right arm was caught on the horizontal stiffener (Z-bar). The employee fell off the trailer and suffered a laceration to the right arm from under the arm pit to below the elbow. The brachial artery was severed.,1
"A maintenance employee fell from a scissor lift to the floor while repairing a roof, suffering a skull fracture and bleeding and broken bones in the back.",1
"An employee was working outside most of the day landscaping, tilling, and laying out straw roll. He was driving a tractor tilling the ground when he started to feel exhausted, was excessively sweating, and felt like he was overheating. He went inside to drink some water. He felt nauseous and threw up. He was hospitalized with heat exhaustion, an acute kidney injury, and dehydration.",1
"Two employees were engaged in horse playing at the loading dock. One of the employee's forcefully contacted the ground, suffering compression fractures to the T10 and T11 vertebrae and a right elbow contusion. The employee was hospitalized.",1
"An employee suffered a heat-related injury, becoming nauseous and fatigued, while walking throughout the unit checking valves and preparing the unit for start up.",1
"An employee was removing a paper jam (newspapers) from a stacker when his left hand was caught in the belt and pinched in the pulley wheel, resulting in a left middle fingertip amputation. The machine was running at the time of the incident.",0
"At approximately 3:00 p.m., an employee whose shift started at 8:00 a.m. was found unresponsive under a tree due to heat stress.",1
An employee was walking across a paved parking lot when a strong gust of wind picked him up and slammed him to the pavement. He suffered broken ribs and punctured lungs.,1
An employee was clearing debris from a running taper machine and suffered a level 2 amputation to the tip of his right middle finger.,0
"An employee was preparing to pull in new electrical power lines with a rope when the rope became entangled in the base of a street sign, causing the sign to become loose and strike the employee in the back. The employee was hospitalized with a bruised left lung, cracked ribs, and bruised vertebrae.",1
A CCA employee suffered a heat-related injury (confusion and heavy breathing) while training with another employee delivering mail.,1
An employee was responding to a grease fire on an apartment tenant's stove when the burning grease caused second degree burns to the employee's right hand.,1
"An employee was working inside the belly of an aircraft to dislodge a 6,000-pound container. He reached down to release a lock on a container and his thumb was crushed between the container and the lock. He was hospitalized and had surgery.",1
"On June 27, 2019, an employee drove an upright pallet jack into the trailer to retrieve a pallet. He slipped off the pallet jack and his right leg was caught between the pallet jack and the trailer's wall. He sustained a fracture to his right shin and was hospitalized.",1
An employee was operating a meat grinder and amputated the right ring finger.,0
An employee was struck by a vehicle while directing vehicles coming into the parking lot. The employee suffered chin and ankle injuries.,1
An employee was assaulted at a rest area along I-95 South by another driver resulting in a broken ankle.,1
An employee was applying sealant to the roof of a covered bridge when the employee slipped and fell off the roof to the ground below. The employee was hospitalized with a fractured back and broken right arm.,1
"A crew was removing an old, silt fence.  As the injured employee was reaching for part of the fence to pull it out, a rattlesnake bit the employee's left hand.",1
An employee was operating a shear and amputated a fingertip on their right hand.,0
"While an employee was inspecting tooling in the storage rack, the lid closed on his hand and smashed his pinky finger, resulting in an amputation.",0
An employee was on a scaffold and fell approximately 6 feet to ground resulting in a leg injury.,1
An employee was pumping chemicals in a hot oiler pump truck. A chemical reaction caused an explosion that propelled the employee into the back of another vehicle. The employee suffered facial contusions.,1
An employee was working near a machine. His left hand was caught in the machine and lacerated in the metacarpal area. The employee also suffered a torn tendon and a fractured pinky.,1
"While walking in a downdraft paint booth, an employee tripped and fell on the steel grating covering the pit. The employee suffered broken ribs.",1
An employee was cutting lumber with a cut-off saw when it kicked back and lacerated the employee from the cheek to the chest.,1
An employee fell off the second step of a crane ladder to the ground while attempting to secure the jib on the crane. The employee suffered a bruised right knee.,1
"An employee fell from the catwalk of an excavator, suffering broken ribs and a bruised left lung.",1
"An employee was working on a metal press when the die broke and his head lunged forward, striking the equipment. He suffered a laceration requiring stitches.",1
"An employee was cutting chicken with a saw when his hand contacted the saw, resulting in a fingertip amputation.",0
"An employee was getting equipment from a truck when the truck door closed on him, rupturing a disc in his back. He was hospitalized.",1
"An employee was helping a flatbed semi driver receive a load. The employee had cut banding on 3 rolled coils of metal. The coils shifted, causing one of them to fall onto the employee. The employee's right leg had to be surgically removed below the knee. The employee also suffered fractures to the left ankle and right wrist.",1
"An employee was climbing up a ladder and lost grip, falling to the floor. The employee was hospitalized.",1
An employee was using a drill press on a 3-inch by 3-inch square of aluminum. The drill bit caught the employee's right glove and amputated the tip of the employee's middle finger.,0
"Employees were cleaning and removing sludge from a pit. A vacuum truck was vacuuming the sludge out of the pit. An employee was using a pressure washer to help make the sludge more flowable.  Another employee was holding the vacuum hose to evacuate the sludge when his foot became stuck in the sludge. The employee operating the pressure washer used it around the other employee's stuck foot in an attempt to free it. The water from the pressure washer penetrated through the top of the employee's boot, injuring the fourth toe of his left foot. He was hospitalized.",1
"An employee was carrying a pipe while approaching steps when he dropped the pipe. He went to pick up the pipe and tripped, falling down the steps and injuring his neck, back, and arm. He was hospitalized.",1
"An employee was operating a manual concrete bagging machine when his finger became pinched, resulting in a right index fingertip amputation between the fingernail and first knuckle.",1
An employee was hospitalized for dehydration after feeling dizzy and lightheaded while on his route.,1
"An employee was assisting in patient care when the employee stepped on a medical line attached to a piece of equipment, causing the equipment to strike and fracture the employee's left ankle.",1
"An employee got off of a forklift to reposition a steel coil (4,980 pounds, 68 inches high, 5.5 inches wide) that was on the forks of the forklift before setting it on an uncoiler machine when he was struck by the coil. He suffered broken ribs and a punctured right lung, requiring hospitalization.",1
An employee was cleaning oil off the floor of a turbine unit with a pressure washer at a compressor station when he began to feel dizzy and later experienced headaches. He was hospitalized for heat exhaustion.,1
A temporary employee was moving boxes by hand from a conveyor onto pallets. He tripped over a pallet jack and fell to the floor breaking the left leg.,1
"An employee was delivering mail when he began feeling sick. He was hospitalized that evening, suffering from heat exhaustion and dehydration.",1
An employee was cleaning around a walking beam machine. She went to remove the last three channels that were in the machine. Her left arm was lying on the press die when she removed the middle channel and the press came down and lacerated her left forearm.,1
"An employee was operating a crane and changing out a roof-top air conditioner at a school building when the employee began to feel symptoms of heat-related illness, including vomiting and feeling overheated, tired, faint, and weak.",1
An employee suffered a heat-related illness and began vomiting. The employee was hospitalized.,1
An 120-pound roll of environmental fabric struck an employee as it rolled off a delivery truck. The employee suffered a dislocated hip.,1
"On June 28, 2019, a maintenance employee was cutting through a damaged highway guardrail with a portable reciprocating saw when the guardrail moved and struck his left forearm, resulting in a tendon laceration that required hospitalization.",1
"An employee was operating an extrusion line and had fed fibers through the roll stand. While he was attempting to separate the strands of fiber, his right middle finger was caught in the roller causing amputation of the fingertip.",0
An employee got up from her desk to walk away. Her foot got caught in the computer wires underneath the desk. She fell and fractured her left hip and femur.,1
An employee was operating a multi-vac bag sealer and amputated the left ring and middle fingers.,0
"An employee was operating a band saw to cut slabs of cooked bacon when the saw cut his finger, resulting in an amputation to his right index fingertip.",0
An employee was working on a lift and was pinched causing a contusion.,1
"An employee was removing a steel wedge from a bending clamp that was used to secure a steel pipe in a bending machine when the wedge came out with force and struck the employee in the head. The employee then fell from the steps he was working from and to the ground, fracturing his skull and back.",1
"While spinning a belt onto a pulley, an employee's right ring and middle fingers were caught and contacted the pulley.  The top of the ring finger was cut off at approximately the top knuckle joint.  The middle finger suffered lacerations and is possibly broken.",1
"An employee was inspecting a mower when his hand went under the deck and made contact with the blade, resulting in amputations of the right-hand index, middle, and ring fingers at the middle phalanges. The mower was running at the time of the incident.",0
"An employee had cut the bands on a bundle of rails in a bunk above him. Three rails rolled off the bunk and two hit the back of his head. He was knocked out for about 30 seconds, then regained consciousness. He suffered bruising in his head area.",1
"An employee was removing a box on a pallet when the strap on the box broke, causing the employee to fall onto the floor and racking system behind him. He suffered a head laceration and a broken right femur.",1
An employee was standing on a ladder trying to remove an anode when the anode struck him and he fell 4 feet off the ladder onto a dirt berm. He landed on his right waist area and was hospitalized with kidney and liver lacerations.,1
An employee was descending an 8-foot A-frame ladder and fell approximately two feet. The employee suffered a broken hip.,1
"An employee grabbed a drilling line that was being used to lift gin poles and the line pulled the employee's hand into the top sheave of the gin poles, smashing four of his left-hand fingers at the mid-knuckle and resulting in an amputation.",0
An employee exited a tug at the Denver International Airport. Lightening struck near-by equipment and travelled to the employee's leg.,1
An employee was using a band saw to cut pork steaks when his right ring fingertip was amputated.,0
An employee was closing overhead dock doors when the rope attached to the bottom of the door broke and the employee fell off the loading dock to the ground. The employee suffered a cracked vertebra in the neck.,1
An employee was operating a utility terrain vehicle (UTV). The UTV rolled onto its left side and the employee sustained lacerations and skin damage to the left leg and knee requiring hospitalization.,1
An employee's muscles cramped up while emptying trash cans due to heat stress.,1
"An employee was working on trucks when his shop rag ignited from a spark, causing his clothing to catch on fire. He sustained burns on his arms and legs and was hospitalized.",1
"An employee was using a chop saw to cut wood when the saw cut the employee's right thumb, resulting in a partial amputation.",0
"While planting shrubs at a worksite, an employee suffered heat exhaustion and was hospitalized.",1
"An employee was cutting a tree, fell off the tree and was hospitalized.",1
"An employee was riding in a forklift basket through a warehouse while inventorying insulation rolls. As the forklift placed the basket down, the employee's finger was crushed between the basket and the forklift mast, resulting in a finger amputation.",0
An employee was operating a standup forklift and backed into a clamp truck. The employee was caught between the two forklifts and hospitalized for a fractured pelvis.,1
"An employee heard a loud noise coming from the pool pumps. During the employee's investigation of the noise, the pump exploded and trichloroisocyanuric acid splashed onto the employee's face, neck, and chest causing chemical burns.",1
"An employee became ill due to excessive heat exposure and dehydration after delivering mail, requiring hospitalization.",1
"An employee tripped over the leg of a window test wall and fell to the same level, resulting in a broken hip.",1
"An employee was climbing down from a tree after cutting a limb when he was struck by lightning, suffering burns.",1
An employee was working on a canopy when the truss and pole caught and smashed the employee's right pinky finger.,1
An employee was removing pallets of merchandise from a trailer using a standup forklift when there was a pallet he could not reach. The employee got off the lift to arrange the pallet in such a manner that he could reach it when an unstable pallet next to the pallet he was manipulating fell on and broke his leg.,1
"An employee was installing sheet metal when a panel of the metal slipped out of his hands and cut his left arm, lacerating an artery. He was hospitalized, requiring surgery.",1
"Employees were ""daylighting"" (exposing) a 2-inch pipeline in the ground to remove the pipeline. Thirty feet of pipe was already exposed. An excavator was digging down 6 inches to expose the pipeline. When the bucket of dirt was rotated away from the pipeline, the tooth of the bucket struck the pipe causing the far end of the pipe to shift and strike an employee at the far end of the pipeline (30 feet) in the neck and jaw. The employee was hospitalized for a fractured jaw.",1
An employee was walking from a carwash exit to a detail shop entrance. The employee transitioned from a rock hardscaped island and was stepping down from the curb when he slipped on a steel storm-sewer grate and fell on the surface of the grate. He fractured his left hip.,1
An employee was hospitalized due to heat-related stress.,1
"An employee was cleaning under a cheese tower conveyor belt when hot water (175 °F) was released on the employee, burning the left shoulder and arm.",1
"An employee was moving a mobile unit postal vehicle. He parked the vehicle and proceeded to dismount it. After exiting the vehicle, he turned to face the vehicle to push in the side mirror and was struck by a customer's car. He sustained lacerations to his head and pelvic region, an abrasion to his right elbow, and pain in his right leg.",1
"An employee was performing a manual shutdown of a glass furnace during a power outage when a fire occurred, causing second degree burns to the employee's face.",1
"An employee slipped on a wet bathroom floor and the left side of her stomach struck a trash can and the floor. She was hospitalized, requiring surgery.",1
An employee was delivering mail when he started experiencing stomach cramps and nausea. He was hospitalized due to heat exhaustion and dehydration.,1
"An employee was removing a piece of plastic from a conveyor when the conveyor's cradle retracted, caught the tip of his left middle finger, and amputated it (without bone loss).",0
"An employee tripped over an extension cord on the floor and fell to the ground, breaking his right hip.",1
"A maintenance employee was working at the service desk when a customer's child ran into him, causing him to fall. He suffered a broken femur and was hospitalized.",1
An employee was fitting/welding on a structural type weldment while standing on a ladder approximately 3 to 4 feet off the ground. The employee stepped off the ladder and onto the weldment. The weldment then became unbalanced and fell to the ground. He suffered a fractured left shoulder and broken left ankle.,1
"An employee was manually wrapping a pallet when the wrap broke. He lost his balance and fell to the floor, injuring his left hip.",1
"An employee was part of a crew replacing a joint on a bridge. As he was pushing and pulling to get the joint in position, his finger got caught between the concrete and steel joint, resulting in a fingertip amputation.",0
"While working on top of a paint booth, an employee suffered a cut to the left knee from a glass panel.",1
"On July 1, 2019, an employee cleaning a room sprayed cleaning material that was in a spray bottle. The employee inhaled the mist from the spray and suffered an asthma attack, requiring hospitalization.",1
"A lift was being used to place a stack of ten scaffold planks on an erected scaffold. Several planks fell off the lift and hit an employee, pinning the employee's leg between the planks and construction equipment. The employee was hospitalized with a fractured leg.",1
"While taking recycling debris to a dumpster, an employee tripped on wooden skids in the path. She fell to the concrete and injured her knees, hand, and elbow. She was hospitalized.",1
"An employee working inside a trench box located in a 9' deep excavation slipped and fell, hitting his head on the trench box spreader bar and suffering a head injury.",1
An employee fainted due to the heat while working on a roof. The employee was hospitalized.,1
"On July 1, 2019, an employee was on a riding mower cutting grass beside a highway, 20 feet from the concrete shoulder. A vehicle veered to avoid tire debris and struck him on the left side. He suffered broken ribs, a punctured lung, and other injuries, and was hospitalized.",1
"An employee was holding 1-inch by 2-foot stainless steel duct strapping. The strapping spun when a self-tapping screw was set into it; the employee suffered a laceration at the base of the left thumb. He was hospitalized, undergoing surgery.",1
An employee was loading a machine onto a trailer that was not attached to a truck. The trailer or machine started to move and the employee attempted to dismount the machine. The employee suffered a compound fracture to his right leg.,1
"An employee fell from an 8-foot step ladder while washing down a metal ceiling. The employee was found on the floor unconscious and bleeding from the head, having suffered contusions and brain swelling.",1
"An employee was repairing a palletizer and removed some bolts from the palletizer. A piece of metal then slipped and pinned his right ring finger, resulting in a finger amputation.",1
"An employee was flagging a forklift driver when metal slag broke off a piece of steel being welded and hit the employee in the leg, causing a fracture. The employee was hospitalized.",1
"An employee was pushing a linen cart in a hallway. The employee's foot became tangled and the employee fell, suffering a broken hip.",1
An employee was holding a cow's tail when part of his index finger was cut off by a hydraulic tail clipper.,0
"An employee was attempting to close a manual valve after flushing a hydraulic choke. When the manual valve would not close, he went to retrieve a tool (wrench) to help close the valve and tripped over a flow line. He fell to the ground and broke his left arm.",1
"An employee was driving an excavator onto a parked trailer when the trailer tipped up and rolled into the back of the truck, pinning a second employee between the trailer and the truck.",1
"On July 1, 2019, an employee was using an air compressor to fill a forklift tire that was mounted to the forklift and attached to a single-piece rim wheel. While the employee was filling the tire it exploded and blew the employee back. The employee hit the wall and suffered a possible concussion.",1
"An employee was disassembling a hydraulic dumper when the carriage assembly came down on his left hand, amputating his middle finger.",1
"An employee was connecting a 3-phase, 460-volt, 50 amp male-to-female plug when an arc flash occurred, burning both of the employee's hands and forearms.",1
"An employee was walking around her supervisor's desk when she tripped on a pallet, fell, and cracked her kneecap.",1
"An employee was adjusting a box maker when it pinched her finger, resulting in a partial fingertip amputation.",1
"A forklift struck an employee, breaking his pelvis.",1
An employee injured his back while pushing a cart of product weighing approximately 600 lbs. up a ramp.,1
An employee tripped and fell into an elevator that had stopped 8-10 inches above floor level. The employee landed on the floor and suffered a broken humerus.,1
"An employee was attempting to remove a metal lid that had been stamped and was stuck in a punch press die when the press was activated via the foot pedal, causing it to cycle and sever his left hand.",1
"After working a full shift delivering mail, a mail carrier suffered from heat exhaustion and was hospitalized.",1
"On July 1, 2019, an employee was attempting to restrain a patient when the patient headbutted him, knocking his head into a television set. He was hospitalized with a head injury.",1
"An employee fell to the ground while walking in a garage, fracturing a wrist.",1
"An employee was climbing back into a dump truck when he lost his balance and fell backwards, striking his head, back, and ribs on the ground. His head required stitches, and his back and ribs were possibly broken.",1
"On 7/1/2019, an employee amputated a finger on machinery.",1
"An employee was on a scaffold doing masonry work when he fell 5 feet to the ground below, suffering broken ribs and requiring hospitalization.",1
"An employee leaned out a doorway and fell 15 feet to the ground after the temporary safety railing failed. The employee was hospitalized for fractures to the hip, pelvis, ribs, and sternum as well as head lacerations.",1
An employee was manually cutting blackberry canes in the field. The employee sustained heat stroke and was hospitalized.,1
An employee was unloading a portable boom lift by driving it from a trailer onto a portable loading ramp. The forward wheel base of the boom pushed the trailer forward and the boom dropped about 18 inches; the employee's right upper arm struck the upper guardrail and was broken.,1
"An employee suffered heat exhaustion while driving a tractor, requiring hospitalization.",1
"An employee was 6 feet up an 8-foot ladder. While descending, the employee slipped and fell to the dirt ground, suffering a right shoulder injury.",1
An employee was on the roof on his knees drilling holes on the edge of a building with a hammer drill. He used force to push the hammer drill into the concrete edge of the building and strained his left knee.,1
"An employee was unloading a tree (approximately 1,500 lbs.) from a truck when the tree fell on top of him. He was hospitalized with rib fractures.",1
"An employee was near a truck loaded with pipes when a pipe shifted and rolled off the truck. The employee was pinned between the pipe and a stack of pipes, fracturing his pelvis.",1
An employee suffered an amputation of the left index finger to the first knuckle while working on a metal press.,0
"An employee was operating a table saw to make cuts on a die holder (16-18 inches L, 4x4 wood) when his fingers made contact with the rotating blade. The employee suffered a complete amputation of the left ring finger and a partial thumb amputation (to the first knuckle).",0
An employee was sitting power tongs down on a base. The employee's right hand was resting on the rig where the tongs come down and the tongs smashed and deeply cut the employee's right thumb.,1
"A forklift was used to lift a set wall, which weighed several hundred pounds, so an employee could shim it. The forklift blade was inserted beneath a metal beam that the 10' by 8' wall sat on, causing the beam to bend when it was lifted. When the employee attempted to shim the wall, his left pinky finger was crushed/pinched, resulting in a partial amputation.",1
A forklift operator was loading plastic pipe onto a trailer. The forklift backed up and ran over another employee's leg. The injured employee suffered a laceration to the leg and broken bone in the ankle.,1
An employee was using a handheld knife to cut meat. The knife cut his left index finger.,1
"An employee was moving masonry blocks when he dropped a block on his hand, pinching his fingertip. As a result, his fingertip was amputated.",0
An employee was operating a stand-up forklift when it collided with a stack of wooden pallets. The employee suffered a broken pelvis.,1
An employee was using fish tape to retrieve a broken rope that had been used to pull wires from a 480-volt panel when an arc flash occurred. The employee suffered third degree burns to the arms.,1
"A crew was finishing setup of crane outriggers and then prepared to switch from a 3-sheave block to a headache ball/pill. An employee was helping to un-reeve the crane block. The operator swung the crane over to the side and placed the block on level ground. He got down from operator's cab and checked to ensure it would not topple over under its own weight. He then helped the employee remove pins from the block to remove the rope. The crane operator then went up onto the crane and heard the employee yelling. The block from the crane had shifted and pulled the wire rope down, causing the rope to tighten up. The employee's finger was caught between the crane boom tip sheave and wire rope. The crane operator ran to pick up the block and relieve tension on the wire rope. The employee suffered an amputation of the right ring fingertip.",0
An employee's right ring and little fingers were caught in a swinging door with a self-closure hinge. Both fingertips were partially amputated.,0
"At the chill dock, an employee who was picking orders dismounted a pallet jack and was struck by the pallet jack, suffering a fractured tibia. The pallet jack had not made a complete stop at the time of the incident.",1
"An employee was servicing a baling machine on a farm. A hydraulic lever was activated and the employee was caught in the machine, suffering a severe laceration (with possible nerve damage) to the left bicep.",1
"An employee was moving kegs and a pallet onto a truck when a keg slid into another keg and crushed the employee's left middle finger, resulting in a partial finger amputation.",1
"An employee was walking in wet grass to get to the office when the employee fell on the grass, breaking the right ankle.",1
"At approximately 9:30 a.m. on July 2, 2019, an employee was walking on a ship cableway located on the port side of the space en route to the port forward corner of the space when he tripped on the cableway and fell. As he fell, his calf impacted and was impaled by a U-channel bracket that was holding up the raceway. He was hospitalized.",1
"An employee tripped on an area rug in a hallway and fell to the wood floor, suffering a broken left hip.",1
An employee was moving the chute on a ready-mix truck. The chute was opened and the employee's right-hand fingers were caught between two folding parts of the chute. The middle and little fingers were broken and the ring finger was dislocated.,1
An employee was moving merchandise from a trailer truck when the employee was hit by three king-size headboards while pushing a hand dolly outside the trailer. The employee suffered a right-side head and shoulder injury (contusion).,1
An employee was working on overhead lines in the bucket of an aerial lift when the employee was overcome by heat and had to be hospitalized for a heat stress-related injury.,1
"An employee was helping another employee (the operator) operate a press machine. The employee was feeding rubber into the press machine, which punches 1-inch-diameter holes in the rubber, when the punch came down and amputated his fourth and fifth fingers.",1
"On July 2, 2019, an employee had been bending down to take temperature measurements from solar panels. The next morning, he awoke with a pinching sensation and pain. He was hospitalized with a herniated disc.",1
"An employee was working on a residential roof when she went to get additional screws. As she was walking, she stepped on an ISO board that was hanging off of the roof and fell down to the surface below, fracturing her ankle and the base of her spine. Fall protection was not worn at the time of the incident.",1
"An employee was joining rail links when a bolt (1"" diameter X 6"" long) failed to line up. The employee struck the bolt with a hammer and it jumped out, striking the employee's leg. The employee sustained a left lower leg fracture and was hospitalized.",1
An employee was taking photographs at the main entrance of the park and then went on a break. The employee was found on the floor of the stock room/break area and was hospitalized with cardiac arrhythmia and heat stress related symptoms.,1
"An employee was holding a screw when the metal shaping machine came down and crushed the tip of the employee's thumb, resulting in a thumb tip amputation.",0
"An employee was walking outside to take out a customer order when the employee stepped off the curb and fell, fracturing the lower tibia and sustaining a ligament injury to the ankle.",1
"On July 2, 2019, an employee was operating a chop saw when his left index finger contacted the spinning blade, resulting in a fingertip amputation.",1
"After inspecting an HVAC unit on a roof, an employee was coming down from the roof on a ladder when the ladder kicked out, causing the employee to fall to the ground. The employee broke both wrists and both ankles.",1
"An employee was attempting to pull a motor out of a sump tank when both eye bolts on the hoisting rig snapped, dropping the motor on top of the employee's right hand. The employee received multiple lacerations and broken bones on the right hand, requiring hospitalization.",1
An employee was operating a vertical panel saw when it cut the employee's left little finger.,1
"An employee was making adjustments on a flag indicator for a block unloader machine. The employee had climbed up onto a 12-foot-high block rack to access the flags and make the adjustments. The employee placed his right hand on the track as the unloader returned to gather another row of palletized bricks. The unloader then crushed his fingers, resulting in broken bones, cuts, and severed tendons in the right index finger, as well as cuts and a partially severed tendon to the right middle finger.",1
"At about 1:00 p.m. on July 3, 2019, a truck driver returned to work after a shift and became ill. The employee was hospitalized, suffering from heat-related dehydration.",1
"An employee was attempting to clear a jam on a chain roll when the employee's left index finger came into contact with the chain roll, resulting in amputation.",0
"An employee was operating a table saw, which cut his hand. He was hospitalized and part of his index finger was medically amputated.",1
"A pile rack was being lifted during bridge construction. A piece of the load slipped off the rack and struck an employee, causing fractures to the scapula and pelvis.",1
An employee had just inspected hail damage on a one-story roof and was coming down a ladder to inspect a gutter. The employee fell from the ladder and broke both legs.,1
An employee was removing thread protectors and was caught between two joints of pipe. The employee suffered four broken ribs and was hospitalized.,1
An employee was delivering mail and started feeling bad due to heat exhaustion and dehydration. He was hospitalized.,1
"On July 3, 2019, an employee suffered from dehydration while working on roofing activities.",1
An employee had been picking squash in the fields all day. He sustained heat stroke and was hospitalized.,1
"An employee fell from a ladder to the ground, suffering a broken collarbone.",1
"An employee was manually rolling pipe on a pipe rack when his right thumb was crushed between the pipe and rack, resulting in a partial amputation of the skin and a bone fracture on the top digit of his right thumb.",1
"An employee slipped and fell while getting out of a truck, suffering a broken rib and punctured lung.",1
"On July 3, 2019, two employees were off the clock and in the parking lot, inside one of the employee's privately owned vehicle. One of the employees was accidentally shot in the leg, requiring hospitalization.",1
"An employee was holding a piece of material in place for a bandsaw. When the clamps were closed, the employee's little finger was smashed between the clamps and the material. The fingertip was amputated.",0
"On July 3, 2019, an employee was struck by a powered industrial truck that was moving in reverse, resulting in a right foot injury.",1
"After delivering packages, an employee became dizzy and light-headed due to heat stress and dehydration. He was hospitalized.",1
"An employee was in a yard starting a gas-powered air compressor. As the compressor started, a flash fire burned his left arm and face. He was hospitalized.",1
"An employee was using a radial arm saw to cut 2 X 4's and 2 X 6's, both 4 feet and 8 feet, into 2-foot pieces when the blade grabbed his glove, pulling his right hand into the saw. This resulted in a middle fingertip amputation midway down the nail. His ring finger on his right hand was cut almost completely off at the first knuckle.",1
"An employee was stripping concrete forms while tied into a form. The employee's lanyard became unattached and the employee fell 14-16 feet, suffering fractures to the back and wrist.",1
"An employee was climbing down a ladder when the ladder's footing slipped out and it fell. The employee fell to the ground, suffering knee and head injuries.",1
"An employee was helping set up a crane jib. The jib fell about 7 feet and hit the employee's left ankle, causing a laceration and fracture to the ankle as well as lacerations to the left middle and ring fingers (with no bone loss).",1
An employee was installing cable in a customer's attic when he fell through the drywall ceiling and landed on a rafter between his legs. He suffered an injury that required surgery and was hospitalized.,1
An employee was working as a material handler on the back side of an aluminum extrusion machine when the employee's arms and legs started cramping. The employee was hospitalized with a heat injury.,1
"An employee was cleaning a thermoplastic cart. The thermoplastic was being drained into a 55-gallon metal drum and was heated. The drum had trash in it and the thermoplastic heated up some aerosol paint cans that were not visible and caused them to explode.  The explosion threw the hot thermoplastic on the employee's head and arms, causing burns.",1
"An employee was changing the elevated blade on a bulldozer when the blade slipped, resulting in a full left middle finger amputation.",0
"An employee was using a hoist to lower round stock into a module after a grinding operation. He was controlling the hoist pendant in his left hand and guiding the lifting sling with his right middle finger. The sling was being pulled up by the hoist, its loose end drawn through the bars. The bars were not separated at each end to have space for the sling to move freely and they rolled, pinching his finger. The sling was then drawn through the bars with his finger still attached. His finger was trapped in the hole of the sling, causing a partial amputation.",1
"A temporary employee had been picking up trash cans and dumping them in the rear loader of a garbage truck. At the time of the incident, he was helping the truck driver back up in the street. As the driver was backing up, the employee's right hand (finger) was caught between the rear loader and a 4 x 4 piece of wood, resulting in a finger amputation.",1
An employee was operating a forklift inside a truck when the truck began to pull away. The employee jumped out of the forklift and broke both heels.,1
"An employee was working on grain fertilizer equipment. The cheater bar he was using slipped, causing him to fall and break his leg.",1
"While unloading a trailer, an employee experienced muscle cramping due to dehydration.",1
"An employee was cutting a top round steak at 1/8 inch, at a customer's request. His hand slipped and contacted the saw blade partially amputating the left middle fingertip. The blade was not guarded at the time.",1
"An employee was working on a 28-foot extension ladder that was leaned against a telephone pole.  While he was coming back down, the ladder shifted and he jumped to the uneven ground and landed on his feet. He fractured both ankles and was hospitalized for surgery.",1
"While changing out the belt on a conveyor, an employee was caught in the machine, suffering a broken arm and lacerations.",1
"An employee was preparing to lift and move a 25-foot, 1,897-pound structural beam from a conveyor system with a crane. He was using a lifting chain to make the lift when the thumb on his left hand was caught between the chain and the structural beam, resulting in a thumb fracture.",1
"An employee fell from a fixed ladder to the floor, suffering a broken hip.",1
"An employee was removing leaves from gutters. The employee returned to the truck to get water, lost consciousness due to heat stress and dehydration, and struck their head on the truck. The employee suffered a concussion.",1
An employee fell 4 feet from a boat while removing shrink wrap and landed on the concrete floor below. The employee was hospitalized for a fractured hip.,1
"An employee was walking outside, slipped and fell on the ground resulting in a fractured right ankle. The employee was hospitalized and had surgery.",1
"An employee fell about 12 feet to the ground while descending an extension ladder at a customer location, fracturing his pelvis.",1
"An employee was performing a preventive maintenance procedure on a drum/thigh separator when the employee's finger contacted the blade, resulting in a right ring fingertip amputation.",0
An employee was operating a press machine when the machine amputated his right middle finger.,1
An employee was guiding a load being lifted by a crane. The employee's right little finger was caught between the crane hook and the load and partially amputated.,0
"An employee was guiding a concrete barrier onto a flatbed trailer. The barrier crumbled in the employee's hand, causing him to lose his balance and fall off the trailer. He struck his head on the crane tire rim and suffered a laceration to the rear crown of his head.",1
"An employee was cutting parsley with a knife, which amputated the tip of the employee's index finger.",0
"An employee was walking across the floor to inspect an eyewash station. The employee slipped and fell on the wet floor, suffering a broken right ankle and right wrist, and was hospitalized.",1
An employee stepped off his powered equipment and it pinned his left foot against a tier rack. The foot was broken and the employee was hospitalized.,1
"On July 4, 2019, an employee was inserting a part into a pneumatic vise. The employee's finger was pinched between the part and the vise, causing a fingertip amputation.",0
"On July 4, 2019, an employee was changing a blade on a derinder machine. The machine fell onto the employee, lacerating the employee's left leg. The employee was hospitalized.",1
An employee was drilling a hole in a concrete wall with a hammer drill. His right middle fingertip was amputated.,1
"An employee was working on a trim press in a forge shop with tongs and a swab. He was putting oil on the trim press when the machine was activated, causing a partial amputation to his right index finger and the next two fingers.",1
An employee was removing a jammed tortilla from a tortilla machine. The machine grabbed and cut his hand.,1
"An employee was hanging a hose on a wall-mounted rack. The hose sprayed hot water on the employee, causing second-degree burns to his torso and right arm.",1
"An employee was bitten by an insect. The bite became infected, and the employee was hospitalized.",1
An employee was helping a customer who was in a powered scooter. She fell; the scooter ran over her left wrist (causing pain) and injured her left leg (causing bruising and swelling).,1
"An employee was using a bending machine when it cycled on his right hand, amputating the tip of his thumb above the knuckle.",1
"An employee was building pallets using a nail gun. As he bent down to nail a pallet, the gun fired into his leg, lodging a nail into his knee.",1
"An employee was placing freight inside a trailer. The trailer pulled away from the dock and the employee fell to the ground, suffering injuries to the right leg, right hip, and left arm.",1
"On July 5, 2019, an employee was working in a flatbed trailer area, consolidating corrugated metal culverts on a pallet at ground level. The employee lifted one end of a culvert and it slipped and cut the employee's left ring and little fingers. The employee was hospitalized, undergoing surgery.",1
An employee was hospitalized after being struck in the head by a falling pipe.,1
"While moving tables for a banquet, an employee suffered a sprained right middle finger. The finger became infected, and the employee was hospitalized for surgery.",1
An employee was using a pneumatic staple gun to secure components of a wooden truss together. The gun shot a staple into the knuckle of the employee's left thumb. The employee was hospitalized.,1
An employee was cleaning up a conveyor system. The employee's left index finger was crushed and amputated in the system.,0
"An employee was operating a press using a foot pedal. As he was changing the die, the machine cycled and the press came down on his left hand. The tips of his ring and middle fingers were amputated.",0
"An employee tripped over the corner of a pallet and fell, suffering injuries to the right elbow and leg. The employee was hospitalized.",1
"An employee was manually moving material to finish fabrication. The angle rolled over the employee's finger, smashing it between the sawhorse and material. His fingertip was amputated.",0
"An employee was cleaning a condenser coil on a rooftop unit. The access plate slipped while the employee was reinstalling it, and the employee's hand went into the unit's fan blade. The employee suffered severe lacerations to the right thumb, index, and middle finger and was hospitalized, requiring surgery.",1
An employee was using a beam saw to cut cabinet parts. The clamp of the saw came down and amputated the tips of the employee's left ring and middle fingers. He was hospitalized.,1
"An employee was putting material on metal racks using a forklift. The forklift struck the racks, which fell on him and broke his jaw. He was hospitalized.",1
An employee was testing the repair of an electrical cord. An arc flash from the cord burned the employee.,1
"A machine activated during material changeover, inserting a rivet into a finger on an employee's left hand.",1
An employee was climbing a ladder when it moved. She jumped off to avoid a fall and suffered a broken ankle and minor cuts to the face and arms.,1
An employee was installing labels on the insides of cones when she became ill. She was hospitalized the next day for dehydration.,1
An employee was cleaning excess batter from a batter machine. His left hand was caught in the machine; three fingers were broken and his palm was lacerated.,1
"An employee was working in and out of a customer's attic pulling fiber optic cable. The employee's body began cramping, with muscle contractions. The employee was hospitalized for severe dehydration causing kidney failure.",1
"An employee was pushing a metal hopper when the wheel became caught in the grating. The hopper tipped over and struck the employee in the leg, breaking the employee's tibia.",1
"An employee was loading cardboard into a baler. She tripped over a pallet and fell to the floor, breaking her hip.",1
Employees were moving a cart full of metal product. One of the employees was pushing the cart when his left little finger was caught between the cart and the product and partially amputated.,1
"An employee was helping start up an extruder, pulling the sheet over the mandrel for string-up. The sheet bunched up on the bar of the mandrel blade, and the blade amputated the employee's right middle fingertip.",1
"An employee was operating a sealing machine when the lower die moved. The employee's left index finger was caught between the lower and upper dies, sustaining a partial amputation.",0
"An employee fell from a ladder to the ground, suffering a head injury.",1
An employee was clearing stuck slices of bread from a bread slicer. The blade amputated the employee's left index fingertip.,0
"An employee stepped on a tack. The employee's left foot became infected, and the employee was hospitalized.",1
"An employee was operating a pallet jack. The jack hit a bollard, and the employee stepped off. The jack then pinned his right leg against the bollard, causing a break above the ankle.",1
"An employee was cleaning a skewer in a meat prep room when she slipped on wash water and fell to the floor, breaking her right radius and ulna.",1
"An employee was working on a stud mill machine. The machine amputated the employee's left thumb, index finger, and middle finger.",1
"An employee suffered heat illness (vomiting, cramps, and dizziness) while slabbing cores.",1
An employee was cleaning out an outdoor fire pit when he began feeling ill and had difficulty speaking. He was hospitalized due to heat stress.,1
"An employee was cleaning up water on the floor of the facility. She finished cleaning the water spot and took a step away from the area and slipped and fell to the floor. She sustained a fractured right hip and right knee contusion, requiring hospitalization and surgery.",1
"An employee was assisting on a refiner in a paperboard mill. While his hand was in a drain, a valve was opened and hot water splashed onto and severely burned his right hand and wrist.",1
"An employee was putting up a fence on a construction site when he experienced heat-related cramping, pain, and nausea. He was hospitalized.",1
"An employee was closing a door when he tripped on a 2-inch lip and fell, hitting his head on the doorframe.",1
An employee working as a cashier was shot during a robbery attempt.,1
"An employee was on the second floor of an apartment complex, collecting trash at each door, when he became lightheaded and dizzy. He was hospitalized, suffering from heat-related illness.",1
"On July 7, 2019, an employee arrived at a gated residence to deliver a shipment. The front door was located in the rear of the residence past the garage. To access the front porch, the employee entered the gated property. The employee was then attacked by a dog and hopped over the fence, hitting the ground and landing on the tailbone. The employee was hospitalized with fractured vertebrae.",1
An employee was operating a plastic extrusion line. The employee was using a hand tool to scrape excess plastic from the end of the line when a pocket of hot gas and plastic erupted and burned the employee's hands and forearm.,1
An employee was in the parking lot collecting carts and collapsed. She had been outside for approximately 15 minutes before collapsing. She was hospitalized for a heat induced seizure.,1
"An employee was moving an overhead, empty 500-gallon fuel tank with a truck-mounted crane and chains when the chain came loose and the tank fell on top of the employee. He sustained a femoral fracture, rib fracture, and medial tibia fracture, requiring hospitalization.",1
"An employee fell down stairs while delivering mail, suffering leg fractures.",1
"An employee was changing out an emergency lighting fixture. The employee was shocked and fell from a filing cabinet to the ground, suffering back and shoulder fractures.",1
"An employee was guiding a guardrail post out of the ground. It released from the hole with force and jumped up. The employee's right hand was pinched between the post and the boom of the puller machine, causing an amputation of soft tissue on the ring finger.",0
"An employee was standing on an 8-foot ladder conducting repairs. He fell from the ladder to the floor, breaking his right femur.",1
"An employee had been performing landscaping work. While riding in the truck after leaving the job site, the employee experienced cramping in the legs. He was hospitalized with heat stress.",1
An employee had left a roof during a lightning storm and was entering his work van. Lightning struck the ground and the employee was shocked as he entered the van.,1
"An employee became ill while installing irrigation pipe. The employee was hospitalized, suffering from heat fatigue.",1
"An employee was on the back of a flatbed truck, cutting with a torch. The employee lost consciousness due to heat/dehydration and was hospitalized.",1
"On July 8, 2019, an employee was using a forklift (to unload a heater from a truck) when it caught fire. The employee suffered second and third degree burns to 40 percent of his body and hospitalized.",1
"A loose belt on a gluer caught an employee's right hand, causing the amputation of the little fingertip and lacerations on the ring and middle fingers.",0
"An employee was working to prep rebar lines, an activity that involved a lot of movement. He experienced cramping and was hospitalized, suffering from heat exhaustion.",1
A steel construction employee was hospitalized with heat stress symptoms.,1
"An employee lost consciousness while typing at his desk and fell to the floor. He suffered a fractured shoulder and compression fractures to vertebrae in his back, and was hospitalized.",1
"An employee was kneeling down to retrieve parcels from a pallet. The employee's knee gave out and the employee fell to the ground, suffering a broken foot/ankle.",1
"A forklift fork slid off its slide rail, striking and fracturing an employee's left big toe.",1
"An employee fell 20 feet from a mast to the ground, suffering a broken wrist.",1
An employee was using a handheld hydraulic crimping tool. A hose failed and injected the employee's left flank with hydraulic fluid.,1
An employee was pulling weeds and trimming bushes using a hedge trimmer. The trimmer severed the employee's first finger and severely cut the second finger.,0
An employee was closing the back door of a dump truck when he slipped on debris on the ground. He grabbed the bottom edge of the entranceway and the door shut on his finger. The tip was amputated and later reattached at the hospital.,1
"An employee was helping unload metal piping material at a delivery location. While he was repositioning piping that had become crooked during unloading, the pipes shifted and his left hand was smashed between them. He suffered the  amputation of the little finger.",0
"Two employees were checking on a clogged dust collector at a baghouse unit outside a facility. After the bag had been removed, one of the employees tried to unclog the collector. The fan blades amputated the employee's right middle and index fingertips.",0
"An employee was trying to unjam a conveyor of pipe when the conveyor actuated. His right hand was caught between the conveyor and the pipe, and his middle finger, ring finger, and little finger were amputated. He was hospitalized, undergoing surgery.",1
"An employee was cutting plastic during packaging and it wrapped around his leg. He fell, breaking his left hip.",1
An employee fell about 30 feet through a metal roof. The employee suffered facial fractures and was hospitalized.,1
"An employee was moving a loaded dumpster on wheels. The employee's right index finger was pinched between the lid and the hinge, causing an amputation to the fingertip.",0
An employee was welding on a pipe bracket between a pumphouse and tank batteries at a salt water disposal site. A flash fire burned the employee.,1
"An employee was on the fifth rung of a ladder, securing it to the wall. The ladder's feet slid out and the employee fell to the concrete floor, breaking his wrist.",1
An employee was performing maintenance on a natural gas compressor. He was turning over an engine by barring over when his left pinky finger was caught between the bar and the guard for the bull wheel. Two centimeters of the tip were amputated.,0
"An employee was lifting the elevator chain of a 1,200-ton press to place on a gear. The counterweight fell and the employee's left middle finger was caught in the elevator chain, suffering an amputation/crushing injury to the fingertip.",1
"An employee fell about 6.5 feet from the utility body of a truck and suffered a wrist injury. The employee was hospitalized, requiring surgery.",1
"An employee was painting equipment from a platform approximately 30 inches high when he lost his balance and fell to the ground, fracturing his right hip and requiring surgery.",1
"An employee fell from a stepladder to the gravel and concrete ground, suffering a compound fracture of the lower right leg.",1
An employee's left ring finger was caught in a door as she closed it. She suffered a fingertip amputation.,0
An employee was hit and knocked to the ground by a fellow team member.,1
"At about 11:45 a.m. on July 8, 2019, an employee was working with a crane operator to flip a sheet of steel piling with two shakeout hooks hung from the crane. While the sheet of piling was being lifted, a hook became dislodged and struck the employee in the right leg, breaking the tibia. The employee was hospitalized.",1
"On July 8, 2019, an employee was making an adjustment under a round bailer when the accumulator was activated and moved downward. It crushed the employee against the ground, breaking ribs.",1
An employee was pulled into a coil line machine when her right arm was caught between a coil line belt and a straight bar going across the belt. The arm was broken in two places.,1
"An employee was dislodging a forklift from a drain. The employee's hand was caught between two forklift cages, causing a fingertip amputation.",0
An employee suffered a leg injury while climbing into a jockey truck. The employee was hospitalized.,1
"At 12:30 p.m. on July 8, 2019, an employee was helping supervise the unloading of a truck with a forklift. A package tilted over while the forklift was moving and fell onto the employee. He was hospitalized to treat a head injury (requiring 18 stitches) and a fractured vertebra.",1
An employee was pulling an empty lumber cart when his left index finger was caught between it and another cart. The fingertip was amputated.,0
"An employee was travelling in an ATV to the worksite. The ATV passed through tall grasses, fireweed, and cow parsnip. The employee had an allergic reaction to the local vegetation which affected the eyes, skin, and airway and required hospitalization.",1
"An employee fell from a ladder to the crushed concrete ground while hanging security cameras on the outside of a building. The employee suffered a broken and dislocated left elbow, a broken right wrist, and a laceration to the floorhead.",1
"An employee suffered heat-related illness (vomiting, dehydration, kidney function issue) while hanging steel. The employee was hospitalized.",1
"On July 9, 2019, an employee was being trained to calibrate an oxygen test bench. He was lying on the floor under the bench during a simulated repair when a 40-pound counterweight's cable broke loose. The counterweight fell from 3 to 4 feet above the floor onto his head. He suffered a broken eye socket and possible skull fracture and was hospitalized.",1
An employee was assisting with moving a large medical cart. The cart's legs caught on a door jam during the move and the equipment fell onto the employee. The employee was hospitalized with multiple fractures to the back and hand.,1
"An employee was in-cutting a steel slab with a portable burning machine. The machine did not cut all the way through the slab. The employee bent down to turn off the machine and the end of the slab broke loose, causing the machine to come down and hit the employee in the back of the head. The employee was hospitalized, suffering from a laceration and bleeding.",1
"On July 9, 2019, a maintenance technician was replacing the plastic wrap at the pin and arm of a baler machine when the arm moved toward him causing him to be caught between the arm and door of the baler. He sustained two rib fractures and a contusion to the kidney and was hospitalized.",1
"After installing grounding wire in rebar mats, an employee became dehydrated and was hospitalized.",1
An employee was cutting a beef shank with a meat saw when a bone struck the blade causing the item to flip. The meat cutter blade caught the employee's right index finger and the employee sustained an amputation.,0
An employee was climbing down from the back of a semi truck when he fell to the ground and sustained a broken leg.,1
"An employee was hand-digging to access a natural gas line. He became ill and was hospitalized, suffering from heat stress/exhaustion.",1
An employee fell five feet ten inches from a rebar wall mold to the ground below and suffered a concussion and a fractured hand.,1
An employee was pulling plastic film on a patch line when a wrap-around occurred on the core.  The employee's hand became entangled in the material and came into contact with the core. The employee's left arm was broken.,1
"An employee had been tying rebar prior to pouring concrete at work. The employee finished work and when he got home he was getting cramps. Later, the employee felt sick, fainted, and was hospitalized for a heat injury.",1
"An employee lost balance, fell on the floor, and sustained a right knee injury.",1
An employee slipped while climbing a rack. The employee's ring was caught on a metal crate resulting in amputation of the ring finger.,1
"An employee was moving some equipment with an electric power jack. When she dismounted, her foot got caught under the machine and sustained a crushing injury. The employee was later hospitalized with a swollen foot.",1
"An employee was shoveling wood chips in a sawmill near a chipper conveyor. He fell and broke his leg. He was hospitalized, requiring surgery.",1
"At about 7:00 p.m. on July 9, 2019, at an employee was putting equipment in the back of a pickup truck when the truck backed up, running the employee over. The employee suffered fractures to the upper left arm, the left femur, the left-side pelvis, and three ribs on the left side.",1
An employee had cramps after a work shift and was hospitalized for dehydration.,1
"An employee was climbing down an extension ladder when he fell, suffering a broken heel and hip. He was hospitalized.",1
"An employee was welding a spigot to a 55-gallon drum's lid. Flammable residue caused the drum to explode and the lid struck the employee, causing a facial fracture and a laceration to the right arm.",1
"An employee's right foot was caught on the edge of a guardrail and she fell, injuring her right knee. She was hospitalized, undergoing surgery.",1
"While tracing security camera conduit lines, an employee fell 28 feet from a second-level platform to a platform outside a grain receiving control room. The employee suffered broken ribs.",1
An employee was using a production band saw to cut beef. The saw amputated the tip of his finger.,0
"On 7/9/19, an employee slipped on water on the floor by the nurse's station and broke an elbow, requiring hospitalization.",1
"After collecting carts, an employee had trouble breathing and was hospitalized with a heat related illness.",1
An employee was retrieving 9-inch rebar from a saw when the saw actuated and amputated the tip of his thumb.,0
An employee was operating a metal brake shear when his left little finger was caught in the machine's hold-down. He suffered a partial amputation to the fingertip.,0
"An employee was throwing brush into a chipper. A guy wire attached to the brush caught the employee, pulled him to the ground, and caused severe lacerations to his back and arm.",1
"On July 9, 2019, an employee was using a low-pressure washing system when it failed. A hose or fitting from the system struck the employee in the ankle and broke it.",1
"On July 9, 2019, an employee was using a pneumatic handle press when it came down on his right thumb and forefinger, amputating the tip of his thumb.",0
An employee fell from a ladder and suffered a broken wrist and a contusion over one eye. He was hospitalized.,1
"An employee was hanging drywall from a scissor lift. The employee fell off the scissor lift after having an apparent seizure. The employee landed on the floor and sustained brain swelling, a broken back, and a broken neck.",1
"An employee was in the passenger seat of a vehicle, winding a trimming string. The loose string caught on a tire, wrapped around the employee's fingers, and tightened until it severed the tips of his left ring and pinky fingers.",0
An employee was loading a trailer when he became dizzy and sat down. The employee lost consciousness and was hospitalized for heat stress.,1
An employee suffered dehydration and possible kidney failure and was hospitalized.,1
"An employee was walking beside a skid steer, adjusting the width on the skid swing arm. The skid steer ran over the employee's left leg, breaking the tibia and fibula. The employee was hospitalized.",1
"While working on a network panel, an employee fell through the panel into an opening and broke four ribs.",1
An employee was wrapping a pallet with shrink wrap when another employee noticed he was acting strange and seemed confused. The employee was hospitalized for dehydration.,1
An employee was bitten by a spider while stocking shelves in a warehouse. The employee was hospitalized.,1
An employee was mixing concrete using a drill with a paddle attachment. The employee's right middle finger got caught in the drill and the fingertip was amputated.,0
"An employee was moving freight inside a truck when his pallet jack became stuck on a pallet. The employee tugged on the pallet jack to free it. When the pallet jack became free it began rolling toward the employee. He fell off the lift gate onto the parking lot, landing on his left elbow and side. He sustained a broken left arm.",1
"An employee fell from a swing set to the ground, suffering a broken vertebra in his back. He was hospitalized.",1
"An employee was pulling a steel trolley. The employee's left thumb was caught between the trolley and a door frame, causing a loss of tissue and the nail.",0
An employee was working on a door latch when it closed on his left ring finger. The skin beneath the fingernail was amputated.,0
"An employee was spreading a gasket for sound wall installation. The vacuum lifter released and dropped the barrier, which crushed his right hand.",1
An employee was unloading pipes from trucks. The employee began to suffer cramps from the heat and was hospitalized.,1
"An employee was driving an electric pallet jack. It collided with a parked stand-up forklift, whose forks cut and fractured the employee's right foot.",1
"An employee was loading 50-pound bags of chocolate into a commercial-grade mixer. The employee slipped and fell into the mixer, where the agitator broke the employee's left arm. The employee was hospitalized.",1
An employee's right index fingertip was caught in a belt and pulley and amputated.,0
"A forklift operator and two spotters were removing a 600-pound pump from a paper machine's virgin pulper. The pump was being lifted by nylon straps, attached to the tines of the forklift, when it became stuck on a pipe flange. The pump disengaged from the housing and started to swing, striking one of the spotters twice in the right leg. The employee received a laceration to the right thigh and another to the right knee, and was hospitalized.",1
"An employee was operating an electric pallet jack when the pallet jack rolled over his foot, resulting in hospitalization and surgery for a fractured foot.",1
An employee was opening bag of lettuce when the knife slipped and amputated a fingertip.,0
An employee was completing a transaction at the register when they tripped over the scanner's cord and fell to the floor. The employee sustained fractures to the face.,1
"An employee was cleaning up residual igniter powder when the igniter powder flashed, causing second and third degree burns to both hands.",1
An employee was servicing equipment when his right hand was caught between a roller and a drum and his right-hand fingers were amputated.,0
An employee was assisting the operator of a window sill mold press. The machine cycled in reverse while the employee's hand was inside resulting in amputations to the right ring and pinky fingertips.,0
An employee was conducting a grading operation and cutting down a 25-foot tree for new homes to be built. The tree struck the employee and fractured the right hip.,1
"An employee was putting product away in a warehouse. While walking backwards he struck a stack of pallets, fell and sustained a broken ankle.",1
An employee was cleaning the rig floor and felt sick from dehydration.,1
"After an employee had completed a delivery, the boom lift was moving back into position and struck the employee in the chest. The employee was hospitalized with multiple fractures to the right side ribs.",1
An employee was plunge-cutting a 2x4 for an outlet using a circular saw. The saw grabbed the wood and then lacerated the employee's wrist.,1
An employee was reversing an unloaded powered buggy down a concrete ramp. The ramp was damp from the rain. The buggy slid as it was descending the ramp and struck a tandem dump truck that was parked near the base of the ramp. The employee's ankle/leg was caught between the wheeled buggy and the dump truck and the employee sustained a fracture to the left ankle/fibula.,1
"An employee was operating a CNC wood router table. As he reached for a loose piece of wood, his hand was struck by the router bit resulting in the amputation of his right pinky finger to the first knuckle.",1
A Brock employee was installing insulation in or near the vent drum of an aerator when hot water condensate released out of a steam line directly above the employee. The employee sustained second degree burns and was hospitalized.,1
An employee was rigging four sets of pipe from around 12:30 PM to 2:30 PM. The employee then began to feel ill. The employee sustained heat stress and kidney failure.,1
"An employee was setting up a new product line for plastic bottles. The employee's finger was caught in a mold, causing an amputation.",0
"An employee was line trimming and edging at multiple properties throughout the day. When he returned back to the branch at 3:00 PM, he was showing signs of a heat illness. After about an hour, the employee's condition did not improve and he was hospitalized.",1
An employee was moving a mobile conveyor when it fell and landed on their foot fracturing it.,1
"An employee was at the feeding table, feeding molding/wood pieces into the wrapping machine. The employee complained of chest pains and then slumped over a pallet of wood. She was hospitalized for heat-related illness.",1
"A machinist was drilling a core out of a part with a drill press when their glove became entangled resulting in a broken wrist, broken fingers, and a partial amputation of the right index finger past the first knuckle.",1
"After their work shift, an employee began to feel sick, light headed, had stomach cramping and was ill. The employee was hospitalized for possible dehydration.",1
An employee was carrying two plastic drums/containers when the top one bounced. It pinched and fractured his left thumb between the two containers. He was hospitalized.,1
An employee was testing the low side of a transformer. The test equipment exploded and the employee sustained arc flash burns to the face.,1
"An employee was moving a piece of aluminum into a furnace. The aluminum fell off the forklift that was transporting it, landed in molten aluminum, and created a splash that caused molten aluminum to burn the employee's arm.",1
An employee was hospitalized for dehydration.,1
"An employee backed up a tugger to attach it to a transport rack. After the employee dismounted the tugger, his fingers were caught between the tugger and a part on the transport rack. He sustained the amputation of the right middle fingertip and a contusion to the ring finger.",1
An employee working from a platform lost their footing and fell to the ground 28 inches below. The employee's ankle was fractured.,1
Two temporary employees working in the forming area were involved in a physical altercation. During the altercation the two employees grabbed one another and fell to the ground. One employee fell on the other employee. The employee that was fallen on sustained a fractured right ankle.,1
"Two employees were removing a screw from a high-speed injection molding machine. As they were removing the screw tip, pressurized molten plastic was released through an opening around the screw tip which resulted in both employees being burned by the molten plastic. They sustained burns to the forehead, right neck, face, right arm, and right hand. One employee was hospitalized.",1
"An employee was attaching a sensor to a robot arm. When he manually released the clamp, it closed on his left pinky causing a fracture and partial amputation.",0
An employee was removing wood debris from a planer machine when his right hand was caught in the machine. His index and middle fingers on the right hand were amputated.,0
"An employee was walking to her desk, tripped over a raised floor tile, and fell hitting her head on the desk. She sustained a laceration above the left eye.",1
"An employee was working on a drilling rig as a pipe was being raised out of the hole. The pipe struck the employee resulting in hospitalization for broken ribs, a punctured lung, and a broken back.",1
An employee was inserting a shaft into a cardboard core on the winder machine when his right middle fingertip was amputated.,1
An employee was operating a stand-up mower to mow a lawn. The mower slid approximately 10 feet down a hill and hit a board. The employee fell off the mower and the mower ran over his left foot lacerating the heel.,1
An employee was moving a 55-gallon metal drum onto a pallet when his left middle finger became caught between two barrels. The fingertip was amputated.,0
An employee was working on an air conditioning unit. Two fingers on the right hand were lacerated when they came in contact with the fan blade.,1
"An employee was cutting a piece of wood with a table saw. The wood jerked and caused his hand to slip and contact the saw blade. The tip of his pinky finger was amputated below the fingernail, and two other fingers were cut.",1
An employee was monitoring ladles and was hospitalized due to heat related illness.,1
An employee was preparing to cut a de-energized and grounded primary cable. An energized cable was cut and the employee was burned by an arc flash and hospitalized.,1
An employee was changing a tooth on the bucket of an excavator. He was using a hammer and chisel to remove the tooth when a piece of the tooth fragmented and struck him on the left wrist and in the stomach. The employee sustained an internal injury to the stomach resulting in surgery.,1
An employee operating a tire shredder was using a pry bar to free a jammed tire from the tire shredder's conveyor guard. The employee's hands became caught between the pry bar and the guard. The employee sustained four fractured metacarpal bones in the left hand and the right thumb was amputated and later reattached.,1
"An employee was installing culvert ends. While removing a temporary light, the light fell and struck his head. He was hospitalized with scalp and facial lacerations.",1
"An employee was changing a die on a stretch blow molding machine when the die press fell and crushed his right hand, resulting in index and middle finger amputations.",0
An employee working on a roof was sweating profusely and had pain in their side. The employee was hospitalized for heat exhaustion.,1
"On 7/10/2019, an employee fainted while riding a self-propelled walk-behind mower. The employee was hospitalized with a laceration on his forehead.",1
"An employee walked from the sales area to the cash register. From the cash register, the employee started to turn and then fell to the floor. The employee stood up and walked away. Later, the employee was hospitalized with a fractured right hip and femur.",1
"An employee was clearing out an 8"" pelletizer. The employee's hand got caught in the pelletizer resulting in the amputation of the thumb and index finger. The machine was not locked out at the time.",0
"While operating a one-yard cement mixer, a temporary employee (working for Express Employment) was caught and entangled by the mixer. The employee suffered a crushed left forearm and lacerations.",1
An employee was working from a ladder replacing a fan belt. The employee fell 12 feet to the floor and was hospitalized with head trauma.,1
"An employee was troubleshooting an aircraft from the cockpit. The employee exited the left side of the cockpit and stepped on the engine intake. When his weight shifted to his right foot, his foot slipped off the intake and he fell off the aircraft. He sustained a compound fracture to the wrist that required hospitalization and surgery.",1
An employee suffered heat-related cramping on returning to the ground after cutting/trimming trees.,1
"On July 10, 2019, an employee pressed the button to raise a dock plate, but the dock plate did not lift all the way on the left side. He went to raise it by hand and it fell, pinching his left hand between the plate and the dock resulting in amputation of the ring fingertip.",0
"An employee was learning to climb a utility pole using a climbing strap and spikes. As he was descending, he lost balance and his weight shifted. His climbing spike became stuck in the pole, causing his knee to buckle. This resulted in a dislocated knee and fractured tibia.",1
"When a boom fell, a 5-inch concrete delivery pipe attached to the boom struck an employee in the leg resulting in a compound fracture of the right femur.",1
An employee operating a punch press was struck by the die and was hospitalized with crushing injuries to the left hand.,1
An employee was retrieving a pan of chili meat and hot water that had been cooking inside the microwave. The pan slipped out of her hands and hot chili spilled over her left arm and hand. She sustained first and second degree burns.,1
An employee was pealing sand away with a bar to direct the flow of molten iron. The iron ejected and contacted the employee causing burns from the base of his left index finger to his left wrist. The employee was hospitalized.,1
"An employee was changing a coating machine for a print run when two of its rolls moved together, pinching the employee's thumb. The thumb tip was medically amputated.",0
"Employees were driving piles. An employee was using his left hand to guide the leads (upright portion that drives the hammer). The lines were suspended by a crane and the third line was not in use. As the crane lowered the leads, the weight of the leads draped onto the third line. This caused the third line to tighten against the employee’s hand causing an amputation to the left thumb just below the nailbed near the first joint.",0
An employee was operating an aerial lift to reach an elevation on a baler. The employee exited the aerial lift to gain access to the baler. The employee fell from the baler to the ground below and was hospitalized for multiple fractures including hip fractures.,1
An employee was assisting three other employees in sliding a new A/C unit under a house. The A/C unit exposed a live electrical line that was buried and the employee was shocked.,1
"An employee was operating a core drill with a 4-inch core barrel to cut concrete and asphalt, and an enhanced sub-base to collect soil samples. The drill bound up and rotated, striking the employee's left hand. The employee was hospitalized with fractures to the left hand and fingers.",1
"An employee was getting ready to repair an air handler. He looked inside the air handler to see what tools were needed. He was attempting to shut off the equipment when his left hand contacted the moving fan blade, resulting in a left ring fingertip amputation. The fan was running at the time of the incident.",0
"An employee was reinstalling the mast chain on a forklift after it had jammed. When the chain went back on, the mast dropped and pulled his hand around the sprocket causing the amputation of three fingertips on the right hand.",1
"On July 10, 2019, an employee was adjusting a hold-down on a molding machine and contacted the spinning circular blade. The employee sustained a partial amputation to the left middle finger.",1
A temporary employee was cutting wood on a band saw when the saw amputated his middle fingertip.,0
"An employee was patrolling the border on an ATV when the ATV rolled over. The employee sustained injuries to the neck, back, and face.",1
An employee was cutting a piece of wood on a table saw. The blade amputated his left index finger.,0
An employee had been feeding wood slabs into a slab recovery saw. The employee turned the saw off and was sweeping out the saw dust when the still spinning blade amputated a finger on the employee's right hand.,0
"While removing insulation, an employee lost their footing and fell 12 feet to the concrete floor. The employee sustained a head injury.",1
"An employee fell to the ground, breaking her right kneecap and left wrist.",1
"An employee was operating a mobile pallet jack and moving product in a warehouse. When he stepped off the pallet jack, it struck the employee's foot and lacerate the lower left leg.",1
"On July 11, 2019, an asphalt maintenance technician was removing a handicap sign in preparation for resurfacing the parking lot when a bee or wasp nest was disturbed and he got stung. He collapsed to the ground and had difficulty breathing. He was hospitalized for an allergic reaction to the sting.",1
"An employee was standing on an A-frame ladder. While transitioning from the ladder to the top of a transformer unit he slipped and fell off the ladder. The employee landed on their left hip and the back of the head resulting in a left hip fracture requiring surgery, and a laceration to the back of the head requiring staples and stitches.",1
"Employees were working to re-line sewer lines with a fiberglass liner. The employees had cut out a piece of fiberglass liner and were pulling it up using a forklift and rope when the piece caught on the manhole rim. The rope was severed and the piece fell and struck an employee, who was in the manhole, on the left foot amputating the middle toe.",1
"An employee noticed the flames of a propane grill had gone out. While re-lighting the grill, the employee sustained burns to his face.",1
"An employee was loading a block (meat ice cube) onto a conveyor. Their left ring and pinky fingers were smashed under the block and fractured, requiring hospitalization.",1
"While leaving work for the day, an employee started to suffer from severe cramping. The employee was hospitalized for dehydration/heat stress.",1
"An employee was four steps up a track ladder, bringing boxes down, when she fell to the concrete floor and broke her leg.",1
An employee was checking for vibration on an applicator roll drive shaft. The grease fitting came around and caught the ring on the employee's left ring finger. The left ring finger was pulled into the applicator roll drive and was de-gloved and medically amputated at the lower knuckle.,0
"An employee was working as a surveyor in the field. He felt ill and left work. Later, he suffered muscle cramping and was hospitalized for dehydration.",1
An employee was washing the shaker screens when he felt short of breath and light-headed. The employee was hospitalized with pneumonitis that was induced by diesel fuel inhalation.,1
An employee was separating a bundle of joists when one of the joists fell on him and hit him in the shoulder. He was hospitalized.,1
An employee was removing a clog from the tumbler when the conveyor belt activated and broke the employee's arm. The employee was hospitalized.,1
An employee was conducting lay-out work from a one-tier bakers scaffold and fell 4 feet to the cement floor resulting in head trauma.,1
"While walking and turning, an employee slipped and fell to the floor. The employee was hospitalized with a broken hip.",1
An employee was bitten by a copperhead snake while pruning a tree. He was hospitalized.,1
"On July 11, 2019, a maintenance employee was removing the motor from a pump in the wastewater area outside of the plant. The motor fell onto the employee's left middle fingertip, which was crushed and required medical amputation.",0
"An employee was removing aluminum from a piece of scrap copper using a shear. As he was using the shear, it cut his finger, resulting in an amputation to the right pinky fingertip just below the fingernail.",0
An employee sustained a possible electrical shock while vacuuming.,1
"A forklift struck a box bin, which in turn struck an employee, breaking the employee's legs.",1
An employee was picking up a piece of plywood to move it to another area. The plywood had been covering an 8-ft hole. The employee fell into the hole and sustained a broken ankle.,1
"An employee was collecting welding leads to leave work for the day. A 1-foot round pipe was on the ground and slid in mud caused by heavy rain. The pipe struck the employee in the leg, breaking his ankle.",1
"On July 11, 2019, an employee was laying an 8-foot, 36-inch diameter concrete pipe as an excavator was pulling the grade. As the excavator was setting the bucket (54-inch wide) down on the ground it pushed the employee towards the 36-inch pipe. The employee's lower back got caught between the bucket and the pipe. He sustained bruising and a contusion to his lower back and was hospitalized.",1
An employee had been dragging tree limbs to the brush chipper 30 feet away. His hands and legs started cramping and he felt ill. He was later hospitalized for heat stress.,1
"Two employees were cutting a concrete wall with a chop saw. The blade got stuck within the cut and the saw kicked back, cutting both employees on the leg. One employee received stitches and was not hospitalized. The other employee had to have surgery on the right leg.",1
An employee became dizzy while building forms along an interstate. The employee was hospitalized for dehydration.,1
"While walking down the hall after lunch, an employee lost balance and fell resulting in bruises to the shoulder, head and face.",1
"An employee bagging material at the 200-cubic foot mixing station was clearing a jam in the dust collector using a mallet. While bracing his body with the left hand, he contacted the rotary airlock resulting in the amputation of the left middle fingertip.",0
"An employee was operating a pallet jack when the employee's left leg hit a pole, resulting in a left ankle fracture.",1
"On July 11, 2019, an employee was making a delivery. While pulling a skid to the back of a trailer, the skid broke causing the employee to fall out of the back of the truck onto the ground. The employee sustained a hip injury.",1
An employee was on an A-frame ladder replacing a light on top of his truck when he fell approximately 3.5 feet to the ground below. The employee hit his head and hip.,1
"An employee was utilizing a magnetic drill to drill holes in 1.5"" tube. The employee was removing metal shavings and his glove was caught by the bit pulling his left hand into the drill. The drill amputated his index fingertip and thumb, and lacerated his middle finger.",0
An employee started working from an aerial lift after returning from lunch when he started to feel ill. The employee was hospitalized for heat stroke.,1
"An employee directed the driver of a tractor trailer to disconnect and pull forward so he could place a trailer stand underneath the trailer. The truck disconnected and rolled backwards, pinning the employee between the rear of the truck and the trailer. The employee was hospitalized with a fractured pelvis.",1
A maintenance employee was cleaning drain pipes and fell from a 6-foot high retaining wall to the concrete surface below and sustained fractures to both ankles.,1
An employee working as a framer was putting hardware on the bottom of an exterior wall on the right side of the house. He was standing on the completed deck floor of the second story when he fell to the dirt ground. The employee sustained a spinal cord injury resulting in paralysis from the chest down.,1
"On July 12, 2019, a crane operator was trying to hook 6-foot-tall steel cover sheets. His left ring fingertip hit the corner of the cover sheets and was broken. He was hospitalized.",1
An employee suffered heat exhaustion while connecting conductors to underground transformers.,1
"On July 12, at approximately 2:30 p.m., an employee was working in the warehouse on the second floor stowing material. The employee tripped while walking and fell to the floor. The employee sustained a fractured hip requiring hospitalization and surgery.",1
The injured employee was working in the lumber yard and was standing next to a yard forklift talking with the operator. A truck backed up and struck the yard forklift and the injured employee was pinned between the truck and the forklift. The employee sustained broken ribs.,1
"An employee was operating a CNC machine when a cutter attachment installed on the machine contacted the employee's head. The employee sustained a laceration to the forehead on the left side, extending upward.",1
An employee had finished two coke oven charges and was hospitalized for heat exhaustion after his shift.,1
An employee had been working on electrical panels in a room at a new construction site. The employee was found on the floor at the bottom of a ladder unresponsive and not breathing.,1
"An employee was using an overhead crane to move parts when a part slipped, causing the load to become unbalanced. While trying to stabilize the load and catch the falling piece, the employee sustained a broken thumb.",1
An employee suffered heat cramps while collecting residential trash.,1
"While an employee was loading a crate into a container, the crate began to break into pieces. A sharp piece of wood punctured the safety boot behind the protected area and caused a fracture which later required medical amputation of the right great toe.",1
An employee was using a tag line on a pipe with a sling. The pipe slipped out of the sling and pinched the employee's hand between the pipe and the pipe stand resulting in smashed fingers.,1
A temporary employee was towel drying a moving belt conveyor. The employee's arm became caught between the conveyor and a product quality control roller. The employee sustained compression injuries to the arm and was hospitalized.,1
An employee was installing roofing material. While walking on trusses he fell approximately 9 ft. to the ground and sustained a broken right ankle. Fall protection was not worn at the time.,1
An employee was cleaning debris from the rollers of a calendar machine while it was in operation. The mill cleaning cloth the employee was using caught on one of the rollers and the employee was pulled in between two rollers. He sustained crushing injuries to the upper body and head.,1
"An employee walking through the loading dock area became entangled in discarded plastic wrapping. The employee fell to the floor, sustained a fractured left femur, and was hospitalized.",1
An employee was struck by a forklift in a warehouse and sustained multiple fractures.,1
An employee was sitting on the rear tire of a lift truck when it pulled forward and turned to the left. The employee sustained a broken leg.,1
"An employee stepped over a pump, put his arm out to brace himself, and came in contact with a valve which then opened and sprayed sulfuric acid on him. He was hospitalized with chemical burns to the face and neck.",1
The injured employee was holding a piece of 2x4 wood while a co-worker was cutting it with a circular saw. The circular saw kicked back and amputated the injured employee's left thumb.,0
"An employee was installing a ramp into the body of a box truck. When the ramp was pushed into the body of the truck, his left thumb was pinched between the ramp and the cross members of the box truck. The thumb was amputated from the middle of the nail.",0
Employees up the hill were cutting down a tree. The falling tree caught onto a leaning tree which then struck an employee in the chest. The employee was hospitalized with cracked ribs.,1
"An employee was loading a truck. While positioning a steel chemical drum on a drum tipper apparatus, the drum slipped through the straps and pinched the employee's hand. The employee was hospitalized for a severe laceration to the thumb.",1
An employee was applying stickers to boxes. He went to remove something that was stuck in the rotary valve when the valve became energized and caused the amputation of the left index finger at the second knuckle.,0
An employee completed pressure washing the deck of an onstage area in the water park. The employee was gathering equipment to clean up the pressure washer. The pressure washer activated while it was resting on his left work boot. The employee sustained a wound to his left foot that required surgery.,1
An employee was operating a motorized concrete buggy that was filled with concrete when his lower right leg was pinned and broken between the buggy and a fence.,1
An employee sustained a foot injury when he fell off a roof and landed on the ground.,1
"An employee standing on a step ladder was struck in the chest by a truss jib and fell 12 feet onto a boulder retaining wall. The employee was hospitalized with multiple fractures to the right arm, broken ribs, a partially collapsed lung, and lacerations to the head.",1
An employee was repairing a forklift when the forklift's axle moved. It caught and dragged the employee several feet resulting in broken ribs and hospitalization.,1
An employee was operating a dicer machine when a sharp part of the machine amputated their left index finger.,0
"An employee was working to de-chock a set of four high work rolls which were being removed from the roll mill for maintenance. While he was removing the spreader bar, he was caught in a pinch point between the spreader bar and a roll resulting in amputation of the right pinky fingertip.",0
An employee was mounting a tire to a rim when the tire and rim assembly fell over. The employee attempted to protect the rim and his finger was caught between the rim and the floor resulting in an amputation of the left middle fingertip.,0
"An employee was de-rigging and unplugging motors. While sliding a motor to a cart, the employee fell and the motor landed on their hand. The employee sustained a stretched ligament in the right hand.",1
An employee was struck by a food truck at the jobsite resulting in contusions and a possible concussion.,1
A thermo-former operator had been trimming excess flashing off the hot water pan and then placing the bar code stickers onto them. He clocked out for lunch when he started to feel cramps in his legs and arms and was sweating profusely. He then felt pain throughout his body. He was hospitalized for dehydration.,1
"While an aircraft was preparing for departure, a ramp service employee was conducting a physical walk-around safety check. He noticed that the forward wing slat was deployed and a piece of rubber stripping was protruding. As the employee attempted to push the rubber back in, the slat retracted, trapping his hand. The employee's right index fingertip was amputated at the nail cuticle.",0
An employee was helping a resident move from the bed to a bedside commode when she tripped over a wheelchair. She fell to her knees and her face hit the bedframe. She suffered a facial contusion and fractured right tibia.,1
"An employee was at the ironing machine making adjustments to the machine's performance. She used a hammer to press down on a belt inside the machine. While pressing down on the belt, it moved and caused the employee's hand to strike a sharp edge on part of the ironing machine. The employee's left index fingertip was amputated.",1
"An employee was moving a granite table top and lost his grip. The table top fell, pinching his finger when it hit the ground. The employee's right ring fingertip was amputated.",0
"An employee was unloading an asphalt roller off of a trailer. The roller slipped off the ramp and the employee was pinned between the ramp and the roller. The employee sustained fractures to the left hip, knee, and ankle. The employee was hospitalized and had surgery.",1
"An employee was making a repair to a forklift. The tines of the forklift were elevated in order to access the brackets at the bottom of the backrest. While the employee was loosening one of the brackets, the backrest and tines fell off the forklift, striking the employee's back, legs, and feet. The employee was hospitalized with a fractured left leg that was broken in two places and a laceration to the right foot.",1
"While tightening a hold-down strap on the roll-off truck, an employee slipped and struck their head on the bumper. The employee was knocked unconscious and hospitalized with a contusion to the head.",1
An employee was working outside when he passed out from heat exhaustion.,1
An employee was welding the inner rim plate of a pontoon using a wire welding machine with .045 flux-core welding wire. The employee stopped welding and then proceeded to chip the slag from the weld when a piece of hot slag popped off the weld and landed on the employee's right upper and lower eyelids resulting in second-degree burns.,1
An employee was pressure washing an excavator. The pressure washer hose became tangled. When the employee went to untangle the hose she was hit by high pressure water. The employee was hospitalized with a puncture wound and burn to the left calf.,1
"On 7/13/2019, at 8:00 AM an employee working as an operator and carpenter was stripping the wall forms of a structure. While repositioning himself he lost his footing, fell to the ground and landed on his foot. He sustained a broken lower left leg requiring hospitalization and surgery. The employee was wearing fall protection, but it was not connected at the time of the fall.",1
"An employee was moving material using a telehandler. He was on the road, which is elevated, and the right wheels dropped off the embankment. The telehandler rolled over and the employee was hospitalized with broken ribs.",1
"An employee was filling gas into a vehicle while standing on a trailer. The employee tripped on the trailer, fell to the ground and hit his head.",1
An employee was attempting to unjam a pump. The pump unjammed while the employee's right hand was on the v-belt. The employee's hand was drawn into the pulley and the pinky finger was amputated. The tendon on the ring finger was also severed.,0
An employee was helping to move precast concrete panels in the yard using a gantry crane. The employee was caught between two panels as one was being placed and the employee tried to reset the foot panel on which the panel rests. The employee sustained broken ribs and a punctured lung.,1
"An employee was walking in the yard when he was struck by a truck backing up. He sustained fractured ribs, a punctured lung, and his left ear was removed.",1
An employee was working on an air compressor when a steel plate fell on his hand/fingers. The steel plate crushed his finger and he sustained an amputation injury.,1
"A postal employee was bitten by two dogs, causing the employee to fall and hit their head on the concrete walking surface. The employee was hospitalized with a skull fracture.",1
"An employee was lowering an industrial mixing bowl. The mixing bowl malfunctioned and continued to lower, crushing the employee's foot.",1
An employee was operating a standup forklift when the back wheels struck a piece of wood causing the forklift to become unstable. The employee lost balance and the forklift struck a shelving rack. The shelves' horizontal member struck the employee in the chest causing a rib fracture on the right side.,1
Two employees were installing a sink. An employee was underneath the sink while the injured employee was pushing the sink down. The sink fell through and broke. The injured employee's right arm went through the sink and his forearm was lacerated.,1
An employee was standing on a pipe rack and fell 3-4 feet to the ground. The employee sustained a fracture to the T3 vertebra.,1
An employee was cutting meat with the saw machine when the bone slipped and the meat cutter lacerated his left index finger.,1
"An employee was installing conduit in the ceiling area of a new school building utilizing a 12-foot A-frame ladder. The employee's legs got caught in the ladder rungs, causing the ladder and the employee to fall. The employee struck the floor and was hospitalized with cracked ribs and lacerations to the head.",1
An employee was walking on the second level of a mushroom house. The employee fell to the first level due to an unsecured walk board. The employee sustained three fractured transverse processes in the lower spine and was hospitalized.,1
"An employee was threading the web on a coater machine. While verifying the tape on the silicon roll was under the web, the employee noticed contamination (scrap film) on the coater drum and attempted to remove it. The employee's left hand was caught in an ingoing nip point and was degloved.",1
An employee opened a pressurized heat exchanger to conduct maintenance. The employee sustained second degree burns on the torso and was also burned on both arms.,1
Two employees were working on a tooling cross bar section. One employee had his right hand on top of a pneumatically controlled front tilt head. The tilt head actuated and pinched the tip of his right ring finger resulting in amputation of the fingertip.,0
An employee was greasing a chain on a 5 cubic-foot blender. The employee's hand was caught in the chain and sprocket resulting in a partial amputation of three fingers on the right hand.,1
An employee fell to the ground level of a vessel while climbing down a ladder. The employee sustained a broken left radius.,1
"On July 14, 2019, an employee was helping to set a die into a machine. The slack in the chain tightened and caught the employee's right ring finger between the chain and the die, resulting in an amputation.",0
"While checking product temperatures in a smokehouse, an employee got something slippery on his boots and then slipped on the floor outside of the smokehouse. The employee's left kneecap made contact with the floor and was displaced.",1
"An employee was working with an emergency response team to restore electricity after an earthquake. The employee suffered heat stroke, then kidney failure.",1
"At approximately 1:00 a.m., on 7/15/2019, a machine operator was performing a maintenance procedure on a board press. The operator was connecting a wire when a cog (wheel) grabbed her right hand and damaged the tissue between the thumb and index finger and knuckles.",1
"While cutting limbs from a tree, an employee sustained a severe laceration to the arm/wrist from a chainsaw. The injury required surgery.",1
"An employee was fixing a pivot and fell approximately 10 feet to the ground, sustaining two broken ribs and a sprained back.",1
"While performing rounds in an apartment complex parking lot, a security officer was struck by a vehicle that was backing into a parking spot. The security officer was hospitalized for a broken leg and abdominal and head injuries.",1
"An employee was roping an elevator car and lowering the ropes to the counterweight. Several feet of rope slack on the machine room floor needed to be released from the hoisting rope. When removing the wire rope clamps, the rope slid through the remaining clamp. The rope gained momentum and struck the employee on the right forearm and fractured it.",1
"On July 15, 2019, an employee fell into a ribbon blender while taking a sample resulting in a broken right leg and ankle. The employee was hospitalized.",1
"An employee was placing a cable around a stack of steel bars when a 4x4 supporting the stack broke and the stack rolled down, pinning and breaking the employee's leg.",1
"An employee was installing steel decking to the roof a warehouse while standing on a roof truss. The employee lost his footing and fell. He was wearing personal fall protection which included a full body harness, a D-ring extension, a retractable lanyard, and a beam anchor clamp. After falling approximately 21 feet, the retractable device caught and stopped his fall but then the D-ring extension’s threading failed and it broke. The employee then free-fell approximately 27 feet to the concrete floor. The employee was hospitalized with injuries including: the right knee shattered into twenty pieces, the right leg fractured in three places, fractures to the front of the skull/forehead, a broken nose, five teeth knocked out, and numerous facial lacerations.",1
An employee was operating a truck-mounted aerial lift to remove a dead ash tree. The boom truck tipped over while the operator was in the aerial lift. The employee suffered a broken leg and a back injury.,1
A temporary employee was struck by a vehicle that was backing up and fell to the ground. The employee was hospitalized with a fractured right wrist.,1
"While attaching a low-bed trailer to a tractor, the trailer fell off the attaching device and landed on an employee's feet crushing them.",1
An employee was pulling/stacking tree limbs on the curb when he felt nauseous and dizzy and was ill. He was hospitalized with a heat related illness.,1
An employee was training a young colt when the horse reared up and the saddle horn was pushed into the employee's abdomen rupturing the employee's spleen.,1
Two employees patrolling the U.S. border suffered from dehydration. One employee was hospitalized.,1
An employee fell to the floor while working in the family birthing unit and was hospitalized with a possible seizure and bruising.,1
"On July 15, 2019, at approximately 5:15 PM, an employee was cutting meat on a bandsaw. The employee's glove got caught on the bandsaw blade and pulled his left thumb into the blade resulting in the amputation of the thumb tip.",0
"An operator was working near the sifter on the bun line. While troubleshooting the flour flow on the sifter, the operator sustained the amputation of the right middle and ring fingertips.",0
An employee on a portable ladder was placing merchandise on an overhead shelf when she slipped and fell off the ladder. The employee sustained head and hip injuries.,1
"On 7/15/2019, at 5:50 AM, a temporary laboratory technician was going to clock in when he slipped and fell to the ground breaking a hip. He was hospitalized and had surgery.",1
"While walking, an employee stepped on a wooden board and landed on the floor, sustaining a broken femur.",1
An employee was using a product picking machine while standing on the machine's platform at a height of almost 10 feet. The employee fell from the platform to the ground and sustained blunt force trauma injuries to the body.,1
"An employee was walking on the sales floor, tripped over a rug, and fell fracturing a femur.",1
"While working in a stairwell installing shoring, an employee was struck by an aluminum beam and sustained injury to the right shoulder.",1
An employee was working near a register when they lost balance and fell resulting in leg fractures.,1
An employee carrying a bucket of hot water was splashed by the water and sustained severe burns.,1
"An employee was checking the position of the grinding wheel to ensure that there was a correct gap between the wheel and the steel. His left thumb came in contact with the grinding wheel while it was still rotating, resulting in severe lacerations and a broken knuckle.",1
An employee was in a scissor lift raising to an elevated working height to install fire suppression equipment. The employee was caught between a structural beam and the scissor lift and sustained a severe head injury.,1
"An employee was coming down from a tower. He stepped onto a transformer cover and fell approximately 4 to 8 feet. He sustained two broken ribs, cuts to the face, and a dislocated shoulder.",1
Employees were using an overhead crane to move logs. One employee was controlling the crane with a remote control. Another employee had his right hand on top of the hoist block when the block was raised. The employee's index finger was caught between the block and a pipe resulting in a partial amputation of the right index finger.,0
An employee was in a trench cleaning soil off of the water line in preparation for a connection. The trench collapsed along with the soil pile that was approximately one foot from the edge of the trench. The employee was completely covered with soil and was hospitalized for a broken jaw and lacerations to the ear and right arm.,1
An employee was assisting in lifting a 55-gallon drum with a crane and a chain. The chain slipped on the drum and the employee sustained a left ring fingertip amputation.,0
"An employee was removing a clog from the impeller of a filter press using a pipe wrench. When the clog became free, a V-belt moved as a result of gravity and crushed the employee's left middle finger, resulting in an avulsion.",1
"An employee fell while climbing out of a truck. A barrel fell on him, breaking his tibia and fibula.",1
"An employee was operating a tractor with a bush clearing device attached to the rear to mow along the pipeline. While descending a steep grade, the tractor slipped, turned sideways, and then rolled over. The employee sustained multiple fractured ribs, collapsed lungs, and lacerations to the head and elbow.",1
An employee was working on the sixth rung of an 8-foot ladder. He was unplugging temporary lights when he received an electrical shock from the temporary lighting cords and fell from the ladder. He landed on and fractured his left ankle.,1
An employee was operating a full revolution mechanical power press when the dies closed while the employee's hands were in the die area. The employee sustained a partial right hand amputation.,0
A delivery employee lost his footing while off-loading a crate during a liftgate delivery and fell off the back of the truck approximately 48 inches to the pavement. The employee was hospitalized with broken ribs and punctured lungs.,1
An employee was operating a pallet jack to move pallets when his leg was pinned between a guardrail and the pallet jack. The employee sustained a compound fracture to his leg.,1
An employee had been shoveling sand when he felt light-headed and dizzy and fell to his knees. The employee suffered from dehydration and heat illness.,1
An employee was cleaning a tank of sand using a high-pressure water hose. The high-pressure water ran across his right foot and cut the big toe.,1
A soil compacting machine rolled over and an employee was caught between the ground and the roll bar.,1
"An employee was delivering mail, walking house to house. The employee became overheated and ill, collapsed, and was hospitalized.",1
An employee was performing maintenance on the deck of a brush clearing machine. The support gave way and the deck landed on the employee's ankle causing injury.,1
An employee was servicing a skid steer bucket from a quick attachment point when the spring holding the hydraulic cylinder gave way and crushed their finger. The employee sustained a broken index finger and lacerations to the skin that required surgery and stitches.,1
"An employee was working above a turbine. The employee fell about 15 feet, suffering a broken pelvis.",1
An employee was running the hand coiler when his thumb made contact with a turning flange on the reel and his left thumb tip was amputated.,0
"An employee was repairing a winch cable when it came loose, struck him on the chin, and fractured his jaw.",1
"An employee was sitting inside a trailer with a/c and had a seizure, possibly brought about due to heat stress.",1
"While troubleshooting a conveyor system, an employee's right hand became caught in the machinery. The employee sustained some degloving and two fingertips were amputated.",1
"While removing material from a blender that had a malfunction, an employee sustained a fracture and laceration to the right arm.",1
An employee was checking the freight he had just loaded into a truck for transport when a forklift backed into him and fractured his left ankle.,1
An employee was changing/mounting a tire onto a wheel that was not mounted on a vehicle. Something popped and the wheel/tire struck the employee. The employee was hospitalized with a broken arm and head injuries.,1
"An employee finished cutting a 2x4 with a circular saw and set the saw on the saw horse. The saw then fell and as he tried to catch it, his right middle finger became caught in the spinning blade amputating a portion of the finger.",1
"On July 16, 2019, employee 1 was spraying down an area with hot water. Another employee lost their balance, causing them to spray employee 1 with hot water. Employee 1 was hospitalized with burns to the right leg and foot.",1
"An employee was performing re-roofing work when he lost his footing, slipped, and fell 7 feet to the ground, breaking his left leg. He was hospitalized. Personal fall protection was worn at the time of the incident.",1
An employee was adding lubrication to a tortilla machine when the machine caught her glove and amputated her right pinky fingertip. The machine was running at the time.,0
"An employee was unloading a semi-trailer truck. As he was repositioning a pallet, he stepped on some moisture that had accumulated and fell 4-5 feet onto the pavement. The employee was hospitalized with a fractured left leg.",1
"Two employees were loading appliances into a delivery truck using a 2-wheeler/dolly. One employee was helping push a refrigerator while the other employee pulled it towards the dolly. The refrigerator fell on one of the employee's lower extremities and mid-section, causing the employee to fall on the floor. The employee was hospitalized with a fractured T7 vertebra.",1
An employee was working on the harvesting floor as a steamback operator. The trolley came into the room and the employee removed it from the track. The employee's fingers were pinched by the trolley wheel and rail and a fingertip was amputated.,0
"While inserting an air hose on a conveyor belt, an employee's right pinky finger was amputated by the conveyor belt.",0
"An employee was walking on a concrete walkway, heading to a designated break area. The employee stumbled on the walkway and fell on their knee, resulting in a fracture of the left lateral tibial plateau.",1
"An employee was boring holes using a milling machine, along the bottom of an amphibious transport dock ship. He was also checking alignment measurements on the intermediate strut of the ship. He stepped down from an upper level work platform and fell to a catwalk below. The employee then rolled under the bottom railing of the catwalk and fell 8 feet to a concrete surface. He sustained broken ribs, a fractured right wrist, and a head laceration.",1
"An employee was pulling the pull cord on a generator. The cord jumped and wrapped around his right hand, then retracted and pulled the hand in, causing an abrasion across the hand and an abrasion on the index finger.",1
A third-party truck was departing the facility and stopped at the gate. An employee was walking over to the passenger side of the truck to talk to the driver and got caught in between the gate and the truck as the gate was closing. The employee was crushed and sustained internal bleeding.,1
"An employee had been cutting grass on a tractor. The employee was found laying on the break room floor. He was shaking, feeling ill, and could not get up on his own. He was hospitalized with possible dehydration, a heart attack, or heat stroke.",1
"An employee had been inspecting a leg processor machine. While adjusting a water sprayer hose on the machine, their right hand was caught and crushed in a moving gripper chain.",1
"An employee walking down a landing, slipped, and fell on the floor, breaking a wrist and the left ankle.",1
An employee walking along the catwalk on the back of an 18-wheeler fell 3 feet to the ground and sustained a compression fracture to the L1 vertebra.,1
"An employee slipped while walking up a flight of wet stairs. The employee fell, suffering a broken kneecap and ankle.",1
An employee was operating a shear when his left ring fingertip was amputated by the blade. The machine was guarded at the time.,0
"An employee had been performing regular packing duties. When he finished processing a cart of boxes, he went to the cooler to stack the boxes onto a storage cart inside the cooler. While transporting the boxes, he tripped over the corner of a pallet and struck his head on a stationary cart inside the cooler. The employee was hospitalized with a bruised head and a cut to the nose.",1
An employee had been weeding in the field and experienced chest tightness resulting in hospitalization.,1
"On July 16, 2019, an employee was feeding product into a silo 30 minutes before the end of his shift. He began to sweat and have hip and lower back cramps, then later dizziness and vomiting. He was hospitalized for dehydration.",1
An employee was helping install a belt and pulley roller when his left hand was caught on the conveyor belt of the grain truck. His hand was injured.,1
"An employee was assisting in the operation of a pallet inverter. The employee noticed wood debris near the roller. As the employee was removing the wood, the inverter actuated and caught the employee's hand/arm resulting in a fractured arm and a laceration from the fingers to the forearm.",1
"An employee was using a hose and hot water to clean a belly line on a trailer. When the employee removed the end cap, pressure in the line caused hot water to spray out, resulting in burns to the employee's stomach area, shins, and the front of the thighs.",1
"Employee 1 went behind a press to turn on the oiler. At that time, another employee pushed a steel I-beam along a manual roller bed to the press. The I-beam struck the right arm of employee 1 and caused a puncture wound requiring hospitalization.",1
"When an employee was walking to the garage of a residential dwelling, the home owner's dog came from the garage and bit the employee's right forearm. The employee was hospitalized for an infection.",1
An employee was feeding dough into the forming die when the fingertips of their middle and ring fingers were caught and amputated by the dough roller.,0
"An employee was found semi-conscious on a lower stairway landing. The employee was spitting up blood and was bleeding from the face, mouth, nose, and ear.",1
"While carrying items, an employee tripped on a table cloth and fell to the floor. The employee was hospitalized with a fractured left hip.",1
"An employee was cutting an 8-inch PVC pipe with a saw. When the saw cut through the pipe, both ends of the pipe came together and pinched the saw's blade. The saw kicked back and lacerated the employee's chest. The employee had surgery to clean the wound.",1
"While an employee was using a wet-saw to cut a concrete wall for a door header, he fell from staging and landed on the ground. The employee sustained a laceration to the right side of the head and a fractured skull.",1
"An employee was waiting out a storm in his work truck but had to use a nearby portable toilet. While he was in the portable toilet, a lightning strike occurred approximately 50 feet away. He collapsed after coming out of the toilet. He suffered a concussion and brain swelling, requiring hospitalization.",1
"At a summer camp, an employee was leading a group of young men on a hiking trip. He stepped on a rock which rolled, and he fell approximately 40-50 feet down a mountain and was hospitalized with multiple internal injuries, a collapsed lung, and cracked ribs.",1
An employee was using gas powered sheers to trim shrubs and lacerated their fingers.,1
"The injured employee was driving a forklift and following another forklift. When the other forklift stopped, the injured employee's forklift continued forward and his leg was caught between the two forklifts. The employee sustained a broken left foot.",1
An employee was using a portable worm-drive circular saw to cut slots in 4X4 lumber for trailer stairs and cut their left middle finger resulting in a fingertip amputation without bone loss.,0
"An employee was standing up while riding on the back of a scissor lift. The employee was crushed between the scissor lift's rail and an exterior metal door frame, resulting in broken ribs and blood in the lungs.",1
"An employee was pressing down on a pressing board foot pedal with her right foot when her left foot became caught under the pedal, cracking her toenail.",1
"An employee had been sitting idle in an air conditioned 18-wheeler and then came into the office with symptoms of lightheadedness, dizziness, and slightly elevated blood pressure. The employee was hospitalized due to heat stress (dehydration, heat exhaustion).",1
"An employee was exiting from the back of a tractor trailer. The employee slipped on wet diamond plate and fell to the ground, breaking his hip.",1
An employee was cutting wood using a table saw and sustained a partial amputation of the left index finger.,0
"An employee was moving a chassis onto a dolly to transport it to the paint both. The employee's hand was smashed between the chassis and the dolly, resulting in a left index finger amputation.",0
An employee was wiring batteries (125 volts) to test them. One of the batteries was placed backwards. The wire became hot and burned his hands.,1
An employee was burned by an arc flash while screwing a face-plate onto an electrical gutter.,1
An employee was sanitizing equipment when the auger from a meat grinder amputated their right index finger. The machine was energized at the time.,0
"On July 17, 2019, a temporary employee was hand picking discarded construction materials while using cloth gloves when a piece of ceramic tile flipped and lacerated his left forearm near the wrist. He was hospitalized.",1
"An employee was manufacturing acoustic panels with fiberglass products. The employee was cutting a panel with a table saw when his right pinky finger contacted the saw blade. The finger was amputated below the second knuckle, and was later reattached.",0
"A wooden crate that contained plate glass toppled over and struck an employee resulting in fractures to the ankle, leg and hand.",1
"An employee was returning a cart mule (a machine used to move carts) to the grocery receiving side of the front of a store. The employee's right-hand fingers were caught between the cart mule and a concrete wall, causing an amputation.",1
"While working a 12-hour shift as a laborer and forklift driver in a molding department, an employee suffered heat-related illness and was hospitalized.",1
"An employee was building manhole tops at a construction worksite. After work, the employee was hospitalized for heat stress and dehydration.",1
"An employee was unloading freight inside a trailer while standing on a deck that was 3-4 feet above the floor of the trailer. The employee fell from the deck and landed on the trailer floor. The employee was hospitalized for injuries to the ribs, left clavicle, and back.",1
"An employee was building a concrete structure while on top of a 20-foot wall. The employee fell from the wall and was hospitalized with fractures to the femur, jaw, and hip.",1
"After working from 6 AM to 7 PM as a flagger for an asphalt crew, coordinating traffic around an area that was being repaved, the employee became ill and required hospitalization for dehydration.",1
An employee was walking in the office building and slipped on the vinyl flooring. The employee sustained a spiral fracture of the right leg/ankle.,1
An employee performing acoustical ceiling work fell from a scaffold to the floor and was hospitalized with a possible wrist fracture.,1
"An employee was rolling a piece of carbon steel pipe from a conveyor onto a storage rack. The pipe was 14 inches in diameter, approximately 65 inches long and weighed about 300 pounds. When the pipe shifted and began to fall between the supports of the storage rack, the employee attempted to regain control of the falling pipe. The employee’s fingers were caught between the pipe and the storage rack resulting in lacerations to the middle and ring fingers of the employee’s left hand.",1
A golf equipment operator was mowing a bunker with a hover mover when he slipped on grass and the mower contacted his left foot. Four toes were cut and the employee had surgery.,1
"An employee was servicing a skid steer when its bucket came down, striking the employee in the head.",1
"While an employee was observing and lubricating a chain-driven conveyor belt, a spray bottle he was holding slipped out of his hand. As he attempted to catch the spray bottle, two of his fingers contacted the moving conveyor belt resulting in the partial amputation of his index and middle fingers.",1
"An employee's hand was pulled into a machine roller, resulting in an index finger amputation.",1
An employee was getting out of a chair when she fell to the floor and sustained a fractured elbow and wrist.,1
"On July 17, 2019, an employee was operating an asphalt paver for a road construction company. At approximately 10:00 a.m. the employee was stepping down from a platform on the paver when he rolled and fractured his ankle.",1
An employee was using a portable band saw to cut threaded rod when the blade cut his left thumb. The employee got an infection that required surgery and antibiotics.,1
An employee was working from a telephone pole to provide service to a residence when he felt a sharp pain in his back. He was hospitalized with a bulging disk.,1
"An employee was building a scaffold frame for use as a temporary structure. While attaching a truss frame, he lost balance and fell approximately 8 feet to the ground. The employee was hospitalized with a concussion.",1
"An employee was using an abrasive wheel to cut water pipe when the wheel kicked back, knocked the employee's face shield off and caused facial lacerations.",1
"An employee walked into a press to grab a tire that was in the unloader. The press pushed the employee into a hot ring, causing burns.",1
An employee was riding a bike on a mountain trail to replace a sign when the employee crashed while trying to avoid a customer. The employee was hospitalized with a left knee injury.,1
"While reversing an electric pallet jack, an employee's left foot struck the step to the cab of a truck that was in the loading area. The employee was hospitalized with lacerations to the left heel.",1
"While walking in a hallway, an employee slipped and fell on the floor sustaining a broken hip and wrist.",1
"An employee was standing on a 10-foot aluminum step ladder reaching through a ceiling hatch during maintenance on a unit. After placing his tools through the hatch he lost balance and fell to the floor. The employee sustained seven broken ribs, a punctured lung, and a spleen injury.",1
An employee was screwing a nut onto a bolt using a battery-powered torque tool when their left index fingertip was pinched between the tool and the bolt. The fingertip was amputated.,0
"An employee was driving a pallet jack when he was hit from behind by another pallet jack. His foot was then caught between the pallet jack and a pole, resulting in a small left toe amputation.",0
"An employee was working inside a robotic cell, handling parts coming out of an X-ray machine. While waiting for the next tray of parts to come out of the X-ray, he rested his hand on the side edge of the roller system. The chain/sprocket teeth then caught his right glove, pulling his fingers into the sprocket. He pulled his right hand out of the sprocket gear and injured the tip of his right middle finger, resulting in a fingertip amputation. The chain and sprocket were unguarded at the time of the incident.",0
"An employee was getting off the truck after washing it down. The employee fell to the concrete ground and landed on his right knee, sustaining a knee injury.",1
"An employee was changing a die inside the pellet mill of a press. The employee was using a torque wrench to tighten the inner bolts, applying pressure in a downward motion, when the wrench either gave way, or reached the desired amount of torque and completed its designed function to break loose. The employee's right thumb was caught between the wrench handle and a piece of adjacent equipment (the aspiration line) resulting in an amputation to the right thumb.",0
An employee was climbing down a ladder on the side of a tank truck when he lost his footing and fell approximately 7 feet to the concrete ground. The employee sustained fractures to both ankles.,1
"An employee was using a meat band saw to cut some pork when his hand slipped and went into the saw blade, resulting in a right thumb amputation.",0
An employee was shot in the stomach by a robber while delivering a pizza to a private residence at 12:30 AM.,1
An employee was moving furniture and boxes into a new home when the employee became overheated and suffered heat exhaustion.,1
"A block of cheese was transferring from the brine area to the packaging area on the metal mesh transfer conveyor. An employee was straightening the block of cheese when his finger got caught in the metal mesh belt. When the employee pulled his hand free, the pad of the employee's left index finger was amputated.",0
"An employee was using a bridge crane to replace slag trays in the burn table. The employee's left ring finger was caught between a slag tray and the inside receiving edge of the burn table, resulting in the fracture and amputation of the left ring fingertip.",0
An employee experienced cramping from dehydration while riding in a truck.,1
"While opening the door of his car, an employee turned around, slipped, and fell. The employee was hospitalized with a broken leg.",1
"An employee was on a ladder, using a saw to trim back low branches from a tree on a golf course. The ladder shifted against the tree and he fell about 5 feet to the grass below. He suffered fractures to his hip, collarbone, and some ribs, as well as a punctured lung and a torn carotid artery.",1
"While an employee was moving a bowl ladle with an automatic control, molten metal splashed from the bowl ladle and landed on the employee's feet. The employee sustained burns to both feet.",1
"An employee had been draining a small vat used for cleaning machine parts; he had carried a 5-gallon bucket of cleaning fluid upstairs four times to pour it into a waste oil collection tank. He suffered dehydration and heat-exhaustion-related hand cramping, then chest and abdomen cramping.",1
An employee's right middle fingertip was amputated by a saw.,0
An employee lost the tip of his finger while working with a lathe.,0
An employee had been setting up a steel plate to cover an excavation. The employee signaled the excavator operator to move the plate using an attached chain. The employee's left hand became caught in the chain resulting in amputation of multiple fingers.,0
An employee was delivering mail in an apartment complex when she slipped and fell on a wet floor. The employee sustained a broken right leg.,1
"As an employee exited the lab, he lost footing on a slippery floor. His left pinky finger got caught in the door jam as the door closed and his finger was amputated.",1
"An employee was in a baler, attempting to unjam cardboard from a hook. When the cardboard came free, the hook struck the employee in the left side of the head and face. The employee suffered a fractured left jaw and left orbit, as well as a cut under the left eye that required stitches.",1
An employee suffered leg cramps due to heat exhaustion and was hospitalized.,1
An employee had been pushing carts from the parking lot to the front of the store. The employee reported back pain and wrist pain and was hospitalized with heat exhaustion.,1
"After operating a forklift, an employee walked to an outside shipping area, lost consciousness, and fell, striking his head on the concrete. He was hospitalized for heat exhaustion and the head injury.",1
An employee on a scaffold was pulling up a load of stone when he fell approximately 50 feet to the lower working surface and sustained a crushed pelvis and internal injuries.,1
"While bending down and leaning forward to open a chuck on the fabric calendar, an employee released a lever manually (not powered). A tiny part then slid across and pinched their right pinky finger resulting in a fingertip amputation.",0
An employee was taking out trash when a sharp object in the trash injured his right thumb.,1
An employee was loading pallets onto a trailer using a stand-up forklift when their right hand contacted the trailer and was fractured.,1
"On July 18, 2019, two employees were washing down ash in the economizer hopper. The water that was being applied struck a pocket of hot ash, causing it to flash. Ash and steam contacted one employee’s thighs and forearms, and entered his work boots, resulting in burns and hospitalization. The second employee sustained a minor burn to his arm requiring first aid.",1
An employee was conducting a changeover on a blow molding machine and was caught in the machine while making an adjustment. The employee's left arm was amputated at the elbow and the right hand was also amputated.,1
An employee was operating a pallet jack when it collided with a moving forklift. The employee fell from the pallet jack and the forklift ran over and broke his lower left leg.,1
"While pulling and pushing a patient onto an examination table, an employee suffered a back injury. The employee was hospitalized.",1
An employee was operating a reach truck. The employee's hand was pinned between the truck and a warehouse rack.,1
An employee was retrieving plastic film from a machine. When the employee pulled the film the machine's blade amputated the left pointer and middle fingertips.,0
A temporary employee was manually clearing plastic material off the air rod of an extruder as it was running into the corrugator when the corrugator machine caught his finger and amputated the fingertip.,0
An employee was cleaning material from behind a press. The press cycled and crushed fingers on his left hand. The index and middle fingers were surgically amputated.,0
"While walking down from the twenty-seventh floor to the twenty-sixth floor, an employee slipped and fell down the stairs fracturing the left leg.",1
"An employee slipped while walking down the stairs, fell to the ground, and sustained a broken ankle requiring surgery.",1
An employee was opening the door of a dishwasher when it came off the track and seriously lacerated his arm.,1
"Two employees were working on a malfunctioning conveyor, attempting to free it by hand. When the table became free, one employee's hand was pinched and the padding behind his right fingertip was amputated.",0
An employee was moving a pallet of boxes from a rack. A second rack rolled forward; the employee's left hand was pinned and the little finger was amputated.,1
An employee was running electrical conduit when he suffered cramps and felt ill. He was hospitalized for heat-related muscle injury.,1
"An employee was removing a suspension bushing from a 53-ft. trailer using a pry bar. Part of the suspension moved, catching his left hand. The employee sustained an amputation to the left middle finger.",1
"An employee was working with a router, rounding the corners of boards. The employee's push stick got hung up. As he attempted to free it, his finger was caught in the router blade and the right middle fingertip was amputated from mid-nail.",0
"An employee was walking around a table inside the kitchen when she tripped and fell to the floor, breaking her hip. The employee was hospitalized.",1
"An employee fell while working from a ladder, suffering a jaw injury that required surgery.",1
"An employee was operating a push mower. While pushing the mower under playground equipment, his finger got caught between the mower's handle and a bar on the playground equipment. The employee sustained a partial amputation of the left index finger.",0
An employee was preparing to shrink-wrap a tote for shipment. She got a roll of wrap from the floor and was carrying it when an unknown insect bit her in the abdomen area. She was hospitalized.,1
An employee in pursuit of a suspect was struck by a motor vehicle. The employee was hospitalized with a broken pelvis.,1
"An employee was not feeling well after his shift. He worked the next day and when he got home that night, he was still not feeling well and could not sleep. The next morning he was hospitalized with low kidney function due to heat exhaustion and dehydration.",1
An employee stepped off the frame of the crusher and fell to the ground. He was hospitalized with injuries to his ribs and right hip.,1
An employee was using a handheld power saw when the spinning blade struck and amputated his index finger.,1
"An employee was working on a beam about 12 feet from ground level, prepping for welding operations. He became lightheaded and dizzy due to the heat and fell from the beam. His personal fall arrest system stopped him from falling to the ground, but his head struck the beam. He lost consciousness and was hospitalized.",1
"An employee was conducting an inspection of the product line when the product being inspected, a spar cap, fell from the cart. It landed on and injured the employee's legs.",1
"While adjusting pallets with a lift truck, an employee slipped and fell to the ground, breaking seven ribs.",1
An employee suffered heat exhaustion while loading a barge with wood pellets.,1
An employee was struck by an 80-gallon water heater in a staging area. The employee suffered fractured vertebrae and was hospitalized.,1
"An employee was helping to unload a truck frame using a forklift. The frame shifted and fell off the forklift, striking the employee and causing a partial amputation of the left thumb tip.",0
"An employee was running a trencher in a yard. The trencher hit a 10-foot rod that had been covered with dirt, and the rod flipped into the employee's back thigh and caused a puncture wound above the knee. The employee was hospitalized.",1
"While walking to the back of the building, wet ruts caused an employee to stumble and fall to the ground. The employee sustained a broken thumb.",1
An employee had disconnected a trailer from a pickup. The trailer started to roll away and the employee tried to slow/stop the trailer while two other employees went to get a block to put under the wheels. The employee sustained broken bones in the right foot from the rolling trailer.,1
An employee had been driving a garbage truck and loading garbage when he began to experience cramps. The employee was hospitalized with a heat-related illness.,1
"An employee was wrapping a box of shrink wrap using green banding. While moving around the box, the employee slipped on some of the shrink wrap causing him to fall on his right hip. The employee was hospitalized with a broken right hip.",1
"An employee was assembling a pallet at the end of an aisle. A 10-pound box of material fell from a third-level rack and hit him on the left shoulder, breaking his clavicle.",1
An employee was working on a mezzanine when it collapsed. The employee fell to the floor and suffered shoulder and head injuries.,1
"On July 19, 2019, wet cement got on an employee's elbow. The employee developed cellulitis on the elbow and was hospitalized.",1
An employee was relocating traffic control signs when a gust of wind blew the sign the employee was holding causing injury to the left wrist.,1
"An employee was descending a ladder when it slipped out, causing the employee to fall 15 ft. to the ground and sustain a broken ankle.",1
"At 5:45 p.m. on July 19, 2019, an employee was using a jib on a bucket truck. He had his left hand on the winch line to help with the slack; when he turned, his left little finger was drawn into the pinch point created by the winch line and spool. He suffered a partial transphalangeal amputation of the left little finger, as well as a fracture to the little finger and ring finger.",0
"An employee was walking and collapsed, having a cardiac event from heat exhaustion.",1
An employee was re-welding a part when his finger was pinched between a cylinder and the part. The employee sustained a fingertip amputation.,0
"An employee was trying to clean out a key slot on a sifter shaft. When the employee pulled the trigger, the wheel fell apart, causing a compound fracture to the employee's left hand.",1
An employee slipped off a wet metal roof and fell 12 feet to the ground. The employee sustained a concussion and his face was fractured on the right side. The employee was not tied off at the time of the fall.,1
"An employee was headed to the exit door when she tripped and struck her shoulder on the floor, bruising it.",1
A driver was backing a refuse truck down a dead-end street. Another employee attempted to mount the riding step on the left rear side of the truck while it was in motion. The employee slipped and was struck by the rear tandem wheels of the truck. The employee sustained fractures to the lower left ankle/foot that required surgical amputation and also sustained multiple fractures to the right leg.,1
"An employee was cleaning the fingers of a spray booth machine. When the employee turned back to the machine, he was picked up by the machine and sustained a back injury.",1
An employee was unloading a piece of equipment when the chain broke and struck him in the leg fracturing his tibia and fibula.,1
"An employee was driving a powered industrial truck. The truck struck a rack, and the employee suffered a broken left femur and a laceration to the interior back side of the leg.",1
"An employee was switching out an empty storage rack with a full storage rack that she had towed to the production line. The employee began closing the shelves on the empty rack, lowering each shelf, one at a time, starting with the bottom and working her way up. As the employee lowered the third shelf from the top, the second shelf dropped and closed on her right index finger. The fingertip was amputated.",0
"An employee was cleaning and sharpening a meat slicer blade when it contacted the employee's right index finger, resulting in a fingertip amputation. The meat slicer was not locked out at the time of the incident.",0
An employee was moving steel from a trailer using a boom truck. The load shifted and caught the tip of his right middle finger. The fingertip was amputated.,0
"On July 19, 2019, an employee was working on a crew cleaning a rest area when he collapsed and experienced seizures and heat stroke.",1
"At 9:15 a.m., on July 19, 2019, an employee was installing gutter screens while standing on the roof of a house. The employee slipped and fell from the roof, landing on a concrete sidewalk about 10 feet below and suffering a broken pelvis and vertebrae.",1
"An employee's left foot was caught between the forklift he was operating and a storage rack, resulting in amputations to his left toes.",0
An employee was attempting to remove metal shavings from a horizontal band saw using a no-touch tool. The sawblade lacerated his right hand.,1
"An employee was trimming a tree and unknowingly cut his primary climbing rope. When he completed his cutting work, he unfastened his secondary (safety) rope to begin his decent down the tree and immediately fell to the ground.",1
An employee was clamping down a truss. The employee's finger was pinched between a board and the truss jig. Part of the fingertip was amputated.,0
"A temporary employee was operating a forklift and dumping a tilt hopper full of aluminum turnings. When the hopper tilted forward, the employee's fingers were pinched between a fork tine and the hopper. Three fingertips on the left hand were amputated.",0
"A service technician was installing an excavator's hydraulic cylinder by hand when it slipped and his right index finger was caught between the base of the cylinder and the ""thumb"" (a part of the bucket and boom arm). The employee sustained amputation of the right index fingertip without bone loss.",0
An employee was welding on a cargo trailer when he began to feel lightheaded and dizzy. He was hospitalized for dehydration.,1
An employee was on the roof setting up a ladder to reach higher elevations during siding installation operations. He fell off the roof and landed on a table 10 feet below. The employee sustained fractures to his shoulders and face.,1
An employee was using a sandblasting gun on a pipeline. The gun hit his right arm and the sandblast media caused an open wound on the forearm.,1
"An employee was completing a fluid treatment process. The employee had just closed a 4-inch valve on a ""T"" manifold when he tripped and fell forward, striking the shin of his right leg against a valve handle and then landing on the ground. The employee's right leg sustained a spiral fracture requiring hospitalization and surgery.",1
An employee was going to hammer protruding nails into a wall in preparation to take down shelving. The nails were more than 10 feet above the ground. The employee was standing on a wooden pallet which was raised on the forks of a forklift when the pallet failed. The employee lost balance and fell more than 10 feet to the ground. The employee sustained a broken left ankle.,1
An employee was walking backwards and pulling a chain when he tripped over an existing chain that was on the floor and fell fracturing the left hip.,1
An employee was pushing a hand cart full of packages to a loading bay when her left ring finger was caught between the hand cart and the building's metal support beam causing the amputation of her left ring fingertip without bone loss.,1
"While installing a guide rail, a post pounder machine backed up and ran over an employee's left foot. The employee suffered a broken foot and ankle.",1
"An employee was loading angle iron onto a trough which was attached to an overhead crane. The trough became disconnected from the overhead crane and it fell along with the angle iron, striking the employee. She sustained fractures to the tibia, six ribs, and multiple vertebrae.",1
"While working in the foundry, an employee became light-headed and nauseated. The employee was hospitalized for dehydration.",1
"A caretaker was leaving a patient's residence when she slipped on the wet floor  tile and fell, breaking a femur. She was hospitalized.",1
An employee tripped over a wheel chock and fell to the ground. The employee was hospitalized.,1
An employee fell from a ladder while cutting a tree branch. The employee struck the ground and suffered a broken left femur and dislocated left shoulder.,1
"On July 20, 2019, an employee was not feeling well while performing her normal job duties as a laborer. She went home and was later hospitalized with dehydration.",1
An employee was hospitalized with a right hand laceration after being bitten by a cat.,1
"At 4:50 p.m. on July 20, 2019, an employee was clearing a tree caught in a downed telecommunication line. The tree shifted and struck the employee, who suffered a severed spinal cord and fractures of vertebrae, pelvis, shoulder, and ribs.",1
An employee slipped and fell on a wet sidewalk and fractured the left wrist.,1
An employee developed a heat-related illness while charging a furnace and was hospitalized.,1
"An employee was transporting a 64 pound box of parts using a hand truck/dolly. As the employee was bringing the dolly up some steps, he felt a severe pain in his lower back. He was hospitalized.",1
"An employee was changing out a battery for a pallet jack. The new battery was hooked up to a hoist when it slipped, falling down onto the employee's foot. The employee sustained a fractured left foot.",1
"An employee was manually moving a 55-gallon drum of caulking from a wood pallet to a dolly. The drum slipped back into its original position, pinching his finger against an adjacent drum. The injury resulted in a fingertip amputation.",1
An employee was using a table saw when the blade caused an amputation of the index finger and a laceration to the thumb and middle finger.,1
An employee was serving as a spotter for the adjustment of staging when several of the staging planks became dislodged and fell to the ground. One of the planks bounced far enough to strike the employee in the back. The employee was hospitalized with an umbilical hernia and had surgery.,1
"An employee had ascended a ladder to stand on the diesel tank of the frac pump to change the transmission oil filters. When stepping down from the ladder, he slipped and fell to the ground breaking four to ten left-side ribs.",1
"An employee was feeding a bear during a safari tour when the bear reached through the 4""x4"" cage and grabbed and bit the employee. The employee was hospitalized with damage to the right forearm and bicep.",1
"On July 20, 2019, an employee was on a lift making a pipe connection inside of a garage door when  the garage door opened and pushed the lift over. The employee fell and sustained face and head injuries.",1
"An employee was repairing the belt on a vacuum pump when it started and rotated, causing the amputation of the employee's right ring finger.",0
An employee operating a press brake sustained partial amputations to the left index finger and the right middle finger when both of his hands were caught between the dies.,0
An employee was troubleshooting a limit switch on a conveyor when he dropped his wrench. The wrench hit the limit switch and caused the conveyor to move forward. The hanger on the conveyor caught his hand and he sustained a severe laceration to the right hand.,1
"An employee was inspecting a 12,000-volt transformer for an overload. When the employee approached the transformer's door, an electrical flash occurred. The employee sustained second degree burns to both hands and was hospitalized.",1
"A conductor bled rail cars. The cars started to roll southeast down the lead. An employee attempted to apply the handbrake. While reaching for the handbrake, the employee stepped on a rail and then a rail car ran onto and stopped on his left foot. Half of his foot was amputated.",1
"An employee was near a stand that was holding a swivel when the stand fell onto the employee's foot behind the steel toe cap, causing a laceration.",1
"A wireline operator was rebuilding a hydraulic setting tool. He finished rebuilding the bottom section of the tool and noticed it was partially stroked out. He went to use the weight of the setting sleeve to finish stroking the tool vertically. His finger was in the hole at the end of the setting sleeve and when he hit the ground with the tool, it stroked and amputated his right ring fingertip.",0
"During a brush fire, an employee was spraying water on a hot spot. The employee stepped on hot ash which collapsed and he fell into a pit of hot ash. The employee sustained second and third degree burns on the legs, arms, and hands.",1
"During training, an employee's right thumb was amputated while closing a hose cover on the fire truck.",0
"On 7/21/2019, an employee was threading a paper machine when their fingers got caught. The employee's left thumb, middle and ring fingers were amputated.",1
"While climbing down a ladder, an employee missed a step, fell to the floor, and fractured a hip.",1
An employee felt symptoms of a heart attack and was admitted to hospital with heat stress.,1
"On 7/21/2019, an employee returned early from their delivery route and felt tired. The employee was hospitalized for a possible heat-related illness.",1
An employee was doing preventative maintenance on a conveyor motor. The employee was using a rag to wipe off excess lubricant from the motor's housing when their right hand became caught in the sprocket and chain on the motor resulting in the right index finger being amputated to the first knuckle.,0
"At 4:30 p.m. on July 21, 2019, an employee tripped over frozen metal and fell into a sow mold containing molten metal. The employee suffered burns to the arm and torso.",1
An employee experienced heat stress.,1
"On July 22, 2019, a controls technician was working on a rewiring job. He was pulling the top off a box containing equipment parts. As the top came off, he jerked backwards and went over the railing of the walkway he was standing on. He fell 14 feet, hit a wire reel, and struck his head on the floor. He was hospitalized and had surgery for severe head injuries.",1
"A housekeeper was cleaning a room. Her left hand was holding onto the door frame. When she reached with her right hand to get something off her cart, the door closed on her left hand. She was hospitalized with an injury to the index fingernail.",1
An employee was operating a stand-up forklift in the warehouse and struck a rack. The employee  and sustained a hip laceration.,1
"An employee was rigging angle steel sections to be hoisted by a crane. A section was lifted by hand and pushed in order to free it from the rest of the bundle. While holding the section, gravel shifted under his feet and caused the employee to lose control. The steel pulled back to its original position and caught the employee's hand against the resting section of steel. He sustained a crushing injury which required amputation of the right middle and ring fingertips.",0
An employee driving a forklift was looking for a shelf to put his load on when the forklift hit a puddle of water and slid to the side. The employee's left heel was crushed between the forklift and a wall.,1
"An employee was standing between the cab of a truck and a trailer. The truck's automatic tarp arm had been activated and was under tension when it broke and swung, hitting the employee in the back. The employee was hospitalized with fractured ribs and a spleen injury.",1
"While an employee was loading pieces of wood into a machine, two pieces of wood pinched his left ring finger resulting in amputation of the fingertip and part of the nail bed.",0
"When an employee jumped off a platform that was 54 inches above the ground, his left armpit was punctured by a metal tube. The employee was hospitalized.",1
An employee was loading cattle onto a shackling chain when he stumbled and a finger got caught in the shackling chain resulting in amputation to a fingertip.,0
A truck driver was opening up the back gate of his trailer when a forklift that was pulling a trailer down the street struck the truck driver. The truck driver sustained lacerations to the right side of the stomach and two broken ribs.,1
"An employee was using a tool to tighten a bolt to a flange. As the employee was removing the tool, the tool actuated resulting in the amputation of the left index fingertip.",0
"An employee was testing a hot water solenoid for the dripping process when he was sprayed with hot water and sustained burns to his chest, neck, and face.",1
"An employee attempted to lift a brake actuator when he felt a sharp pain in his back, resulting in a back strain.",1
"An employee was getting ready to place a pin in the rod basket. The employee slipped and fell approximately 14.5 feet from the top of the derrick to the ground below and sustained a fractured skull, fractures to the face, and a fractured right hand.",1
"During a truck inspection, an employee opened a valve on the truck and was sprayed with phenol and detergent. He sustained burns on his forehead, abdominal area, chest and underarm area.",1
"An employee was walking across a lawn to deliver a package. The employee fell approximately 5 feet off a wall and landed on the driveway, breaking his femur.",1
An employee was pouring molten aluminum from a hand ladle when the aluminum spilled and burned his leg.,1
"An employee had been delivering uniforms, mats, and towels. The employee was sweating, lost consciousness and was hospitalized due to dehydration.",1
"An employee was loading a one-person aerial lift onto a trailer and securing the lift to the trailer with a come-along. A hook from the come-along came loose from its attachment point on the trailer. The tension from the come-along cable ratchet system caused the hook to fly back toward the employee, striking and injuring his left thumb resulting in medical amputation of the thumb tip.",0
"While assembling hydraulic cylinders, an employee's finger was pinched between a rod bearing and a cylinder barrel resulting in amputation of the right index fingertip.",0
"An employee was pinned between the spreader bar of a trench box and an excavator bucket during a sewer main installation. The employee sustained lower lumbar and thoracic compression fractures, a bruised liver, and dislocated ribs.",1
"On July 22, 2019, an employee was hand feeding metal rods into the chute of a welding machine when her right ring finger was caught by a clamping device and the fingertip was amputated.",0
"An employee was working on a large wheel loader, installing a ring and pinion in an axle. His left ring finger became caught between the ring and pinion and he sustained a fingertip amputation.",0
An employee set the brake and exited a forklift inside a trailer. The forklift then moved and struck the back of their right foot/ankle area. The injury required surgery.,1
"An employee taking meter readings at a customer's home was attacked by a pack of fifteen dogs. She sustained bite injuries to the head, arms, and legs.",1
"An employee was riding on the running board of a moving pickup truck when his hat blew off. He jumped off the truck and hit his head on the ground, requiring hospitalization.",1
An employee was installing a mirror in a home under construction. The mirror broke and fell on their forearm causing a laceration that required hospitalization.,1
"On 7/22/2019, an employee was walking out of a patient's room when she slipped and rolled her ankle. She was hospitalized for a fractured ankle and required surgery.",1
An employee was cutting a door on a table saw when his right hand contacted the blade resulting in amputations to the index and middle fingers. The saw was unguarded at the time.,0
"An employee's apron became entangled in the mixer paddles of a mixer and the employee's arm was pulled into the mixer paddles, resulting in a broken arm.",1
An employee was operating a jointer and was pushing a hold-down across the jointer table when their hand slipped and their left index fingertip was amputated.,0
"An employee was setting up a tool to cut. While pushing the tool into a machine, a clamp closed on the employee's finger and he sustained a fingertip amputation.",0
"The injured employee was kneeling beside a core drill in order to put water on it while another employee was drilling a 2"" diameter hole into the bonded overlay. The core drill seized up in the concrete, causing the entire drill to spin, striking the kneeling employee on his left side and throwing him into the foundation wall. The employee sustained contusions to his knee and elbow.",1
"An employee was getting parts out of a box to inspect, tripped on the corner of a pallet and fell. The employee was hospitalized with injuries to the left side and right arm.",1
An employee was ascending a tree when the tree limb that their climbing line was attached to failed. Their fall protection equipment activated and the employee sustained suspension injuries including bruises.,1
"An employee was moving pallet jack out of a charging station in order to put another jack in the charging station and struck metal racking. His right foot was pinned against the metal racking, causing a heel laceration.",1
"On 7/23/2019, an employee was attempting to remove a crate from a pile of stacked materials when a pile of steel beams became dislodged and fell toward the employee. The smaller steel beams struck a larger steel beam, which then fell onto the employee's right foot. The employee sustained multiple broken foot bones, requiring hospitalization and surgery.",1
"An employee tripped and fell down a stairway, injuring both elbows.",1
An employee crawled under the lamination line she was operating  and her right hand and arm were burned by a heated roller.,1
"An employee was helping to move a granite slab onto the photograph station using an overhead crane with a clamp attachment. The clamp holding the slab lost its grip and the slab fell, causing crushing injuries to the employee's right foot and the amputation of all the toes.",0
"An employee was installing lighting from an 8-foot A-frame step ladder when he lost his balance and fell to the ground, breaking his right wrist and requiring hospitalization.",1
An employee was strapping a boat mold onto a trailer when he lost consciousness due to heat exhaustion and fell to the ground. The employee sustained a laceration to the head from striking the ground.,1
"While tripping pipe, an employee tried to catch a pipe collar as it was falling. The employee's fingers were lacerated.",1
An employee was making electrical connections for lighting in the first floor locker room. While connecting two wires the employee sustained a transthoracic electric shock and burns on both hands.,1
"An employee was making a delivery at a customer's job site. He went to step into the job site trailer when his left foot became stuck on the threshold, causing him to lose balance and hit both knees against the wall of the trailer. He then collapsed to the floor inside the trailer. He fractured both kneecaps.",1
"On July 23, 2019, an employee was walking down the hallway pulling a travel suitcase when she tripped and fell to the ground, fracturing her left hip.",1
"An employee was walking to the parking lot when she tripped and fell, fracturing the right knee.",1
"An employee was using plywood to cover access openings in the bridge decking when he slipped and fell through. He fell about 5.5 feet to the temporary platform below, sustaining bruising and fractures to the ribs and wrist.",1
An employee was installing a crank seal on the mid-bore assembly line using an automated seal press. The press completed and was returning to the home position when it pinched the employee's left ring finger and amputated the finger pad.,0
"An employee was walking up stairs and fell, fracturing her foot.",1
"An employee was walking between the dining room and kitchen when she tripped over the flipped corner of a mat. She fell forward, hitting the front of her face on the ground and injuring her neck. She was hospitalized and had surgery.",1
"While operator training was being conducted for an excavator operator, an employee was run over by the excavator and sustained a right leg injury.",1
An employee was hooking up a foundry hook to a load when their right thumb was trapped and smashed between the hook and the load.,1
"On July 23, 2019, at 10:00 a.m., an employee was in an elevator at the plaza level when the elevator dropped one to two floors causing a fractured right ankle and a fractured L2 vertebra.",1
An employee fell down stairs.,1
"On July 23, 2019, at approximately 10:30 AM, an employee was installing new hinge pins on the driver's side door of a truck. He bent down to move the stand arms of the lift, and when he stood back up the adjustment handle of the tool holding the door in place poked/contacted his armpit. Approximately 30 minutes later, the employee reported that it was getting painful and difficult to breathe. The employee was hospitalized for a partially collapsed left lung.",1
"A work crew was tasked with installing a 21-inch diameter, 9-foot long, 200-pound pipe sleeve for a duct bank installation through an underground transformer room (vault). The crew knocked out a hole from the wall of the existing vault leading out to an excavated space. Four crew members, located in the vault, got the pipe sleeve into position, approximately 10-feet off the floor, and were able to push the pipe sleeve into the hole towards the employee inside. The center of gravity of the pipe sleeve shifted and slid into the hole. The employee's left pinky was caught between the pipe sleeve and the concrete wall. The top portion of the pinky required medical amputation.",1
An employee was helping to move a pump assembly when the pump fell off the forklift and struck the employee breaking his pelvis.,1
An employee had been spinning yarn on a frame when her hair got caught in the yarn take-up shaft. The hair was completely pulled out and the scalp was peeled back.,1
"An employee had changed out belts/sheaves on fan motors for a dry kiln machine. While the employee was manually turning the belt to test the tension, his left index finger got caught between the belt and a sheave and was amputated.",0
An employee was moving pallets with an electric pallet jack. The employee was backing out of the aisle when falling pallets injured her legs.,1
"During the dismantling process, an employee was removing shoring poles from underneath forms. He was struck by a horizontal beam and sustained crushing injuries to the left leg.",1
"An employee was removing roofing materials and trusses from a camp structure. He was walking on the tin roof when he slid off the roof and fell approximately 22 feet to the ground, suffering a fracture.",1
An employee was putting away inbound freight using a forklift and struck a wall. The employee's left leg was caught and broken between the forklift and the wall.,1
"On 7/23/2019, an employee was cleaning a dock plate. When a tractor trailer disengaged from the dock, the employee fell from the dock and landed on the ground below. He sustained broken ribs.",1
"On 7/24/2019, an employee slipped on a wet tile floor and fell on the right hip, fracturing it and requiring hospitalization.",1
"An employee was standing on top of a tanker truck while filling it with ethanol using a gravity-fed mechanism. As the employee was filling the ethanol through the top hatchway of the tanker truck, a flash fire occurred. The employee's shirt caught on fire and the employee jumped approximately 12 feet from the top of the tanker truck to the earthen ground below. The employee sustained burns to his torso and arms, as well as a fractured left leg.",1
An employee was using a forklift to unload building materials. The forklift tipped and he was hospitalized for head injuries.,1
"At the transition of the carpet and tile floors, an employee tripped and fell onto a cart and then the floor, fracturing her arm above the elbow.",1
"While using a forklift to elevate a 500-gallon tote to put 400 gallons of diesel fuel into the fourth compartment of the fuel truck, an explosion occurred and the employee was burned on the face, arms, hands, left side of the body and left leg.",1
An employee was sealing cracks in the highway with a wand that dispenses rubber sealant from a slowly moving truck when the truck's light tower struck overhead power lines. Electricity traveled through the vehicle and down the wand where it shocked the employee.,1
"The injured employee was holding materials while another employee was pouring molten metal using a spoon. The spoon failed, allowing the molten metal to spill and contact the injured employee's right leg. The molten metal then ran down into the employee's boot causing burns to the ankle and foot.",1
An employee was operating a shrink wrapper. The employee stepped out from behind a pallet on the shrink wrapper and was struck by a powered industrial truck causing a right leg fracture.,1
"After making a delivery, an employee was shot and sustained injury to the lower abdomen and left leg.",1
"An employee took the handle of a press and went to a lathe to reshape the handle. While using the chuck to reshape the handle, the employee's fingertip was partially amputated.",1
"An employee was climbing a ladder with a pack of shingles when he fell off the ladder and landed on a pallet, injuring his back.",1
"An employee was either ascending or descending an equipment-mounted ladder when he fell to the ground, breaking his scapula, rib, and elbow on the left side of his body.",1
"An employee was attempting to clear a jam in a palletizer when the machine cycled, crushing the employee between a pallet and the wall. He suffered a spinal injury at the waistline.",1
"An employee was entering a construction trailer with a box when the employee tripped, fell, and landed on the trailer floor, suffering a hip injury.",1
"An employee was on a platform cutting boards when he fell approximately 12 feet from the platform to the ground, suffering spinal fractures, a broken left collarbone and shoulder, a rib fracture, a torn lung, and a concussion.",1
"An employee was cutting boards with a circular saw. The saw hit a knot in the board and kicked back, amputating the employee's left thumb tip.",0
"An employee was using a 7,000-psi pressure washer to clean out caulk from concrete. The hose to the pressure washer got entangled and as the employee freed the hose, the pressure washer traversed across his foot while spraying, causing a severe laceration requiring hospitalization.",1
"An employee was ducking under a manual chute when his nose was caught on a small ""s"" hook attached to a chain. The hook went up his nose and had to be surgically removed.",1
An employee was standing next to a tractor when it rolled backwards and the right front tire rolled onto the employee's right foot. The employee sustained torn tendons and a fractured right foot.,1
"An employee was clearing trash from an area surrounding a lift when the lift was lowered onto his right foot, resulting in the partial amputation of his middle toe.",0
An employee was trimming shrubs when he was bitten by a copperhead snake.,1
An employee was walking in the split case picking area of the distribution center when she tripped or lost her footing and fell. She sustained a fractured right wrist.,1
"While getting down from a dozer, and employee stepped onto the track and was then stepping onto the arm of the dozer when he lost his footing. His left leg slipped between the dozer track and arm, breaking it.",1
An employee was unloading boxes while doing a delivery and became ill. He was hospitalized due to severe dehydration and heat exhaustion.,1
An employee sustained a hernia while lowering a 5-gallon bucket of grease.,1
"An employee fell to the ground while clocking out, fracturing the left humerus and left femur.",1
An employee was operating a forklift when the side of the forklift came in contact with a guard that was protecting a piece of equipment. The guard snapped and hit the employee in the elbow resulting in a laceration. The employee was hospitalized.,1
An employee was assisting another associate in utilizing the large roll bender to bend 3-foot steel pipe. The employee's left index finger was caught in the machine and sustained an avulsion resulting in amputation to the first knuckle.,1
"An employee was involved in a forklift accident, fracturing his pelvis and foot.",1
"At the loading dock, an employee was assisting a co-worker with closing a trailer door. As the trailer was pulling out about 15 feet, the employee was caught between the trailer door and an adjacent concrete wall. He was hospitalized with a crushed shoulder/arm.",1
An employee working on the debone line was looking for a pair of scissors when the employee's smock pulled her arm into the line resulting in a fracture to the left arm.,1
"An employee was unjamming boards from a rip saw and contacted the spinning blades. He sustained three lacerations to the left hand and forearm, broken fourth and fifth metacarpal bones in the left hand, and a broken ulna in the left forearm. The machine was unguarded at the time.",1
"An employee was welding on a part that was standing upright in a metal stand when the part tipped, pinching and breaking the employee's thumb between the part and the stand.",1
"An employee was performing a mid-shift wash down in the evisceration department when she saw a chicken hanging in the neck skin cutter. She was trying to remove it when her fingers were caught in the cutter, resulting in a finger amputation.",1
"An employee was wiping off a machine's safety guard while the bottom side rolls were forward coating. Part of his rag dropped into the nip and sucked his hand into the rolls, de-gloving his left index finger.",1
"A driver was making a delivery. While unloading the trailer, his foot became caught in the lift on the back of the trailer causing the employee to fall and break his right ankle.",1
"After returning from her afternoon break, an employee felt dizzy, nauseous, and had shortness of breath. The employee was hospitalized for possible heat-related illness.",1
"An employee was sitting in the cab of an excavator as employees were taking a trench box apart. A pin was pulled and the trench box's connecting bar went into the cab of the excavator, striking the employee's left leg and fracturing it below the knee. The employee was hospitalized and required surgery.",1
"On July 24, 2019, at 10:00 p.m., an employee suffered an anaphylactic reaction to honey while sitting next to someone eating honey-flavored cereal.",1
"An employee was using a bandsaw to cut beef when the left index finger contacted the bandsaw blade, amputating the fingertip above the first knuckle.",0
"A temporary employee's right arm was caught between two slabs of concrete, causing deep lacerations.",1
An employee was polishing a small stainless steel part when their glove was caught in the spindle of the polishing machine resulting in amputation of the right middle finger.,0
"An employee was using a ratchet strap to plumb and shim a vertical post that was part of a mezzanine installation. The employee released the ratchet strap and his right index finger was caught in the strap, resulting in a broken finger. He was hospitalized.",1
"An employee was releasing tension off a securement binder when it rolled and pinched his left ring finger between the binder and the trailer edge. As a result, his fingertip was amputated to the nailbed.",0
An employee sustained a gunshot wound to his buttocks and lower body area when another employee (temporary worker) discharged a bullet from a firearm.,1
"An employee was cutting lumber with a pull saw. He had accumulated some scrap lumber underneath the blade. He turned the saw off and proceeded to clean under the saw blade and guard when his hand hit the blade, lacerating his left thumb and index finger. The blade had not come to a complete stop at the time of the incident.",1
"An employee was heating tar with a propane torch. Tar and fire blew out of the tank when the valve came off. The employee suffered burns to the arms, legs and body.",1
"An employee was feeding a web into the rolls of a printing press when the rolls were jogged while his finger was in the pinch point, resulting in the amputation of the employee's fingertip.",0
An employee was using a sledgehammer to strike a stake into the ground when the sledgehammer struck and broke his right index finger.,1
An employee was adjusting a clipper using a hex key when the clipper's ram activated and amputated his left fingertip.,0
"An employee was aligning an elevator inside a tower when the employee fell from a height and suffered a head injury, broken pelvis, and broken back.",1
An employee was merchandising an account when he began to feel symptoms of heat stress and was hospitalized.,1
"An employee was cleaning the end of a rotating shaft. The shaft caught the cleaning cloth and the employee was flipped over it, suffering a broken arm and ribs.",1
"While an employee was being trained to operate a forklift, his left leg was pinned between the vehicle's cab and a column.",1
"An employee was working with an automatic can palletizer when he noticed cans had fallen off a pallet. While the employee was resetting the cans, he was struck in the right leg by the machine causing a fracture to the tibia and fibula.",1
An employee was operating a punch press when his left middle and index fingers became caught in the press and were crushed.,1
"An employee was cutting wood on a table saw when his left hand was caught and lacerated in the saw, resulting in possible amputations to the index, middle, and ring fingers. He was hospitalized. The saw was unguarded at the time of the incident.",1
An employee was hospitalized for head trauma after falling 20-25 feet from an order picker onto the cement floor.,1
An employee was moving a cart of glass mat sheathing when the cart tipped onto his lower left leg and fractured the tibia and fibula.,1
"An employee was walking down concrete steps from a 19"" concrete platform. On the last step, the employee's left foot stepped on the front edge of the step, causing the employee's right foot to roll. He lost his balance and continued to step down. His body and leg moved in a twisting motion, causing a break in his right tibia as his right foot impacted the ground. He did not fall down. He then sat down on the step and radioed for help.",1
"An employee was cleaning small pieces of material off a fan when the fan cut his fingers, resulting in amputations to his thumb, index finger, and middle finger.",0
An employee was using a miter saw to cut wood and amputated his thumb.,0
"On July 25, 2019, an employee was opening a dock door and preparing to load a truck when the employee's left ring finger was crushed between the dock plate and truck, resulting in an amputation to the finger.",0
"Two employees were changing out machine pads on a bar turner machine. To get to the machine pads, they needed to open another door within the machine that was pinned and hinged, however the door was stuck. Both employees pushed the door. When the door moved, the injured employee’s right middle finger was caught in one of the pin holes and the distal portion of the finger was amputated.",0
"An employee was pulling a mold out of a machine when the mold pinned the employee's hand against the machine, causing a laceration and fracture to the hand that required surgery and hospitalization.",1
"An employee was cleaning up an aisleway. The employee picked up a portion of a log and went to throw it on the waste conveyor. The employee slipped on the incline that led up to the conveyor, fell down, and his foot got caught on the conveyor. The conveyor belt pulled off his boot and cut his foot. The employee was hospitalized.",1
An employee sustained an amputation to the tip of his left thumb while lifting a street grate.,0
"An employee was bundling in the finishing department. The employee was fixing a twisted piece of product in the stacker. While trying to reorient the metal, the employees right middle finger was pinched in the stacker resulting in a partial amputation. The machine was running at the time.",0
An employee was testing a welding robot for routine maintenance when his left ring finger was caught and amputated in the hydraulic clamp.,0
"An employee was using a rag to wipe off the motor of a running blower when the rag was pulled into the blower. He was trying to remove the rag when his left hand contacted the blower fan blades, resulting in a left index finger amputation.",0
"An employee was attempting to adjust material in a machine when the employee was pulled into the machine, fracturing the left arm and ribs and requiring hospitalization.",1
An employee stepped on a nail or screw and suffered a puncture to the foot.,1
An employee was performing a pre-trip inspection of a pallet jack when it moved forward and pinned his left leg against a guard rail. The employee sustained a broken leg that required surgery.,1
An employee was installing a belt over a pulley on a fan when his left middle finger was caught between the belt and the pulley. He pulled his hand out and tissue was removed from the first joint of his finger.,0
"An employee was repairing a water leak on a pier and fell approximately 15 inches to the ground, suffering a broken femur.",1
An employee was using a pipe to pry a stacker table back into the cart as it came off the tracks. The pipe sprung back towards him and hit him on top of his head. The employee sustained a contusion and laceration to the head.,1
An employee was removing an old meter face. When he attempted to restore power an arc flash occurred. He was electrocuted and required hospitalization.,1
"An employee was putting a box into a trash compactor when his leg was caught in the compactor, breaking his left tibia and deeply lacerating his leg above the left knee.",1
"On July 25, 2019, at about 9:45 p.m., an employee was checking a machine to ensure the line was clean and all food was removed when the employee's right hand became stuck and was crushed in a 3/4-inch gap between the two augers.",1
A forklift was moving a skid down the dock when it caught the corner of a crate that was on the dock. The crate was pushed into a dockworker's left foot and fractured it.,1
An employee was rinsing the immersion blender when it slipped from her hands and she tried to catch it. Her right ring finger was caught in the blender and sustained a partial amputation.,0
"On July 25, an employee was installing a metal spiral duct at a newly built grocery store. He was walking backwards while moving the spiral duct to a different location when he lost his footing and fell on a piece of metal conduit. He suffered a pelvic injury and was hospitalized.",1
"An employee was driving an ATV during recertification training when the employee lost control of the vehicle during a turn and rolled over. The employee suffered six fractured ribs (right side), a fractured right arm, and a bruised liver.",1
An employee was performing HVAC start-up work when he was found unconscious and was hospitalized for a head injury.,1
"An employee was operating a weed eater cleaning around guard rails when he disturbed a yellow jacket nest and was stung numerous times, suffering an allergic reaction to the stings.",1
"An employee was engaging in metal-working operations, handling a large coil of metal. A hydraulic holding bar came down to secure the coil prior to the machine performing its work. The metal holder came down onto his right thumb, causing a broken bone and laceration to the right thumb.",1
An employee was operating a plate compactor when a dump truck backed into him. The tire ran over his leg and pelvis. He was hospitalized with a broken pelvis and tailbone and required a skin graft on his leg.,1
"An employee was trying to remove round bar risers from pipelines to replace them with marine board risers. He rigged two pipelines to be elevated so that the round bar could be cut off and replaced with marine board. His hand was on an outside pipe and when the two rigged pipelines were elevated, they swung and collided with his right hand. His right middle finger was crushed and had to be surgically amputated.",1
An employee was running a bag machine. When he attempted to clean a roller his right index finger was amputated. The roller was unguarded at the time of the incident.,0
"An employee was holding the doors open for employees leaving the fab area when his right thumb was caught in the hinge of a door, causing an amputation to the tip of his right thumb.",0
An employee was driving a forklift when it hit a support column. The employee suffered a broken arm.,1
"An employee was operating an edger when a stave (board) became jammed in the edger. The employee tried to push a second stave through to clear the edger when the stave kicked back and hit the employee's stomach, causing internal bleeding.",1
"On July 26, 2019, a technician was installing a short belt to circumvent the air conditioning system in the engine compartment of a truck. The employee's right second and third fingers got caught between a pulley and drive belt resulting in partial amputations at the first joints.",1
"An employee was charging an AC unit when freon splashed onto his right hand from an open valve, causing frostbite.",1
An employee was working in her office when she fainted due to fumes from painting in the area. She was hospitalized.,1
"An employee was laying deck. He was attempting to untangle his retractable when he fell 27 feet onto the concrete floor below. He suffered a back fracture and puncture wound near the liver, requiring hospitalization and surgery. His retractable was not worn at the time of the incident.",1
"An employee was repairing an automatic pool cover machine when his left middle finger was caught in the moving parts, resulting in a left middle fingertip amputation.",1
"An employee was lubricating a chain and sprocket when he dropped the spray nozzle. He was attempting to retrieve the nozzle when his finger was caught by the chain and sprocket, resulting in a left index fingertip amputation. The chain and sprocket were covered at the time of the incident.",0
"An employee was using a sprayer to spray a soybean field when a pin in the equipment broke. She was examining the sprayer's hydraulic hoses and loosened one when the spray boom dropped and struck her lower right leg, breaking it.",1
"An employee was driving a forklift when he approached a steel rack. He was attempting to use his left leg to prevent the forklift from hitting the rack when he struck a steel rack, fracturing his left tibia.",1
"An employee was using a 6-foot A-frame ladder to access and clean windows. The employee fell approximately 2 feet from the ladder and hit their head on the pavement, resulting in a concussion and brain bleed.",1
"An employee was operating a telehandler to set trusses on a new construction site. The employee was making a y-turn maneuver to position the telehandler perpendicular to the sidewall and raise the small post frame truss up and over the 12-foot sidewall. The telehandler was on a steep grade. As the employee was making the maneuver, the telehandler began tipping to the side. The employee attempted to jump from the operator's seat and was struck by the roll cage. The employee was hospitalized with lacerations to the forehead and fingers.",1
"An employee was pinned between two trailers and suffered internal injuries, requiring hospitalization.",1
"An employee was installing insulation into the cavity of a wall. A wooden guardrail system was installed around the opened area. The employee was leaning over the guardrails when one topsail separated, allowing the employee to fall from the fourth to the second level floor. The employee was hospitalized with a fractured pelvis and right arm.",1
An employee helping to clean the patio area was pinned between a manlift and a welder resulting in a laceration to the right calf requiring surgery to repair tendons.,1
"An employee was using a ratcheting lifting device to lift the tongue of the pull-behind hydro-seeder off of the hitch of the bull dozer. Once it was off the hitch, the tongue fell and landed on the injured employee's left foot. The employee sustained crushing injuries to the left foot and toes, as well as the amputation of the fourth toe.",1
"An employee was in a trailer moving a pallet of merchandise with a pallet jack when the shrink wrap around the boxes of merchandise came loose. The boxes then fell and struck the employee, causing him to fall from the back of the trailer to the ground. He broke his wrist.",1
An employee was using a powered industrial truck (PIT) when his right leg was pinned between the PIT and a storage rack. His left tibia was fractured and he sustained two puncture wounds on the left leg as well.,1
"An employee was attempting to free a section of tarp cover that was caught on a trailer when the trailer’s air-operated gate was engaged. His hand was caught and crushed by the closing gate, requiring hospitalization and surgery.",1
An employee was on a plane returning from fighting a forest fire in Arizona when the employee became ill due to heat and dehydration. The employee was hospitalized with a muscle injury.,1
An employee was holding the door open for a co-worker when a fire extinguisher fell off the wall and landed on the employee's left leg. The employee sustained a broken femur.,1
"On July 26, 2019, at approximately 8:30 a.m., an electrician was using a reciprocating saw to remove a bolt from a sump pit at a gas station in order to make a repair. As the employee was sawing the metal bolt, a flash fire occurred and the employee was burned on several areas of the upper body. The employee was hospitalized.",1
An employee was driving a golf cart in the facility when their left leg came in contact with a steel safety barrier and was fractured.,1
An employee was walking to his workstation when cardboard bales fell over and struck him. He sustained shoulder pain and a possible broken ankle.,1
"An employee was prepping a truck for painting when a paint scraper grazed the employee's left hand, injuring the middle finger.",1
"After performing ground work, an employee experienced leg cramps at the end of his shift that became worse. He was hospitalized for dehydration.",1
"An employee was on a tractor trailer, securing a load. He lost footing while getting off the truck and fell to the concrete ground breaking his left ankle.",1
"An employee on a roof was headed towards a lift, and slipped on a fiberglass panel and fell 12 feet to a dock below. The employee was hospitalized with a broken nose, bruised and lacerated right eye socket, broken right elbow, broken ribs on the right side, and injuries to the pelvis. Fall protection was not connected at the time of the fall.",1
An employee was standing on the step on the back of a stopped trash truck. The police were pursuing a vehicle at a high rate of speed when the vehicle hit the back of the trash truck. The employee was thrown from the truck. He stood up and walked for a moment before falling down. He suffered a concussion and neck/upper back strains.,1
"An employee was performing a tool change in an eight-spindle chucking machine. After completing the other seven spindles, he rotated the machine to the eighth spindle and pushed the stop button. The employee's left middle finger contacted a spindle before it had come to a complete stop resulting in a fingertip amputation.",0
"An employee was working to remove a broken bolt out of the top drive unit. While removing the swivel/quill, it shifted and fell back into place causing the partial amputation of his left index finger.",0
"An employee was operating water-jetting equipment when it got plugged. He reported the issue and stepped back while another employee started troubleshooting. After steps were taken to continue working, the second employee restarted the equipment. The equipment stopped working again and quickly turned sideways under pressure. Pressurized water struck and penetrated the first employee's blast boot, piercing the skin on his right foot.",1
An employee was working with a crew on the road to help install cable when the employee crossed the road and was struck by a pedestrian vehicle. The employee broke both legs.,1
"While an employee was cleaning around boilers, a blast of fire came through an open observation door of a boiler. The employee sustained second degree burns to the back of his hands, arms, neck, and face.",1
"An employee was unloading a safe-way trailer using a remote control when he pushed the ""in"" button instead of the ""out"" button. His finger was then caught between the hook and cart, resulting in a left ring finger amputation when he pulled his hand back.",0
"An employee had a team working on a new conduit feeder to a substation switchgear. The 480-volt side of the switchgear where the work was taking place was locked out, tagged out, and verified with a meter to not have power.  At the entrance point of the conduit into the substation, another employee was using a knock-out set to punch a hole into the gear. He was having trouble getting the knock-out started, so the injured employee attempted to help him. The injured employee was standing on a two-step riser working with his hands over his head. He was trying to adjust and move some existing wires out of the location of the new knock-out location to thread on the cutting die. As he was moving and pulling, he pushed against the side wall of the switchgear. The side wall flexed into the adjacent compartment, touching a buss that caused an arc flash. The injured employee suffered burns to the hands, left arm, and midsection of his body.",1
"On July 26, 2019, an employee tripped and fell on a carpeted surface while walking out of a patient's room. The employee suffered five bone fractures in her hip, requiring hospitalization and surgery.",1
"An employee tripped over a box and fell to the floor, fracturing a fibula.",1
"An employee had just climbed down a ladder after completing a welding job. The employee was then struck by a concrete block and sustained cuts, scrapes, and a fracture to an arm.",1
"An employee was putting together an order by stacking materials on wood pallets. The employee went to step over a pallet, caught his foot, and fell to the concrete ground. He landed on his shoulder and was hospitalized for shoulder surgery.",1
An employee was performing work between a tender truck and an applicator truck. The applicator truck coasted forward and pinned the employee between the two vehicles. The employee sustained multiple fractured ribs.,1
"An employee was delivering mail when he became ill due to dehydration, requiring hospitalization.",1
"An employee was preparing dunnage for the setting of concrete products. The employee's hand was on top of the dunnage when the product was placed, pinching the employee's finger between the dunnage and the product. As a result, the employee's left index fingertip had to be amputated at the nail.",0
"An employee was cleaning out a rotary valve when his right hand contacted the moving valve, resulting in the partial amputation of his right index and middle fingers.",0
"An employee was assisting another driver in loading a couch onto the company truck. As the employee was stepping into the truck he slipped off the tail gate, fell backwards, and hit his head on the ground. He was hospitalized with contusions to the head, right shoulder and right ribs.",1
"An employee fell off a powered industrial truck, suffering a broken leg.",1
An employee was operating a manual dough cutter. The cutter amputated the tip of the employee's left middle finger.,1
"An employee was adding paneling on the roof of a 25-foot tall home when he fell off the roof onto concrete. He was hospitalized for a head injury, broken arms, and a fractured skull. Multiple surgeries have also been performed. Fall protection was not worn at the time of the incident.",1
"An employee was doing maintenance on a piece of machinery with a rotating belt drive. The belt caught the employee's hand, amputating the fingertips.",1
An employee was cleaning a conveyor/line at the deli walk area of a plant with a chlorine liquid solution (foam spray) and went to the breakroom because she experienced difficulty breathing. She was eventually hospitalized due to inhalation of the foam spray.,1
"On 7/28/2019, an employee was attempting to manually let down a dock plate when another employee released the safety latch because the plate would not come down. The dock plate came down and struck the employee, pushing him into product and the wall of a trailer and landing on his right leg. He was hospitalized with a fractured leg and dislocated shoulder.",1
"An employee was purging material through a silo that has a rotary air lock on the bottom. Product was not flowing; when the employee tried to get the product flowing again, three fingers were amputated in the air-lock mechanism.",1
"On July 28, 2019, at approximately 2:15 p.m., an employee was in the office when her knee gave out. She fell to the ground and sustained fractures to the left shoulder and was hospitalized.",1
"A maintenance employee was attempting to repair a dripping A/C unit on top of a mezzanine when he fell 9 feet through a drop ceiling, suffering a head injury, broken ribs, broken vertebrae, and a concussion. The mezzanine was not fully guarded at the time of the incident.",1
"An employee was checking an unsecured tow bar connected to a push-out tractor and an aircraft when the tow bar fell onto his right big toe, causing a fracture that required surgery.",1
"On July 28, 2019, a temporary employee was packing containers of product into boxes when the employee's left pinky finger got caught in a pinch point of the turn table and was amputated.",0
"On July 28, 2019, an employee was bent over at the waist to access bottles on a low shelf in a kitchen. An opening cooler door struck her and she fell to the floor, breaking her right hip.",1
"An employee fell about 10 feet to the ground while loading a tanker trailer, resulting in a broken left forearm.",1
"An employee was operating a floor auger when it jammed. When clearing the jam, the employee's finger became caught on an internal shaft resulting in a partial amputation.",0
"An employee was unplugging raw material from a feed elevator when he asked another employee to turn on the elevator to make sure it was not plugged in. He saw sticks piling up at the bottom and  went to pull them out. His hand was near the opening of the elevator when he lost his balance and one of the buckets caught his right hand. His right hand was then pulled inside the elevator, causing a laceration to the right middle finger. As a result, the bottom of his right middle fingertip was amputated and he shattered the tip of the bone on the same finger.",0
"An employee fell to the ground and hit his head, suffering a spinal cord injury.",1
"On July 28, 2019, an employee was fixing a steel grading product to a fixture. A steel grading product fell and the employee was hospitalized with fractures to both arms.",1
"An employee was driving a side-by-side ATV along a berm checking a levee for damage when he hit a rock and lost control of the ATV, causing it to roll. He was ejected from the ATV, breaking his left ankle and receiving lacerations to the head.",1
"An employee was working on a ladder adjusting the line on a flagpole when he lost his balance and fell to the ground, breaking his hip.",1
"An employee was on a roof guiding insulated roof panels into place to secure them into steel beams with self-tapping bolts. He was working with two other employees who were in a scissor lift. The roof panel slipped from the beam at the peak before being secured and fell to the scissor lift below.  This caused the other end of the lift to teeter upward, making contact with a 7,620-volt powerline. All three employees were shocked and received electrical burns. The employee on the roof fell approximately 25 feet to the concrete ground below. He was hospitalized with multiple breaks of the right leg and arm, numerous broken facial bones, severely damaged lungs, a tear in the aorta, and possible spinal damage.",1
"While on patrol, an employee was ejected from an ATV when it rolled over. The employee was hospitalized with broken ribs, contusions/bruising, and a brain bleed.",1
"An employee was searching for scrap debris behind tailing rolls. The employee was descending a step at the tension reel area towards the coil car when his heel slipped, causing him to fall into the coil car, striking his rib cage. He sustained three broken ribs and a contusion on the side.",1
An employee was trying to determine what was wrong with operation of a miter saw when the saw amputated the end of the employee's left index finger.,0
"An employee was helping guide a fiberglass barge cover as it was lowered onto a hopper barge. The employee's right middle finger was pinched between the cover and the steel barge coaming wall, causing an amputation of the end of the finger.",0
"While loading baskets with material, an employee's hand got caught between a basket and a stop. The employee's right middle finger was smashed and amputated.",0
"An employee was rigging a muck box on a crane. As the crane operator hoisted slack out of the rigging, one of the lifting eyes did not align. The employee attempted to hit the lifting eye with his hand to straighten it out when his left ring, middle, and index fingertips were crushed by the muck box lifting eye, resulting in an amputation.",0
"An employee was stocking shelves from a two-step step ladder. The employee fell, suffering a broken left ankle.",1
"A Metro Public Safety security officer was following someone through a store. As the guard turned a corner, the person they were following struck the guard's face and head with two thick glass bottles, causing a skull fracture.",1
An employee was packing muffins into containers and felt ill. She was hospitalized with heat exhaustion/dehydration.,1
"An employee was performing maintenance activities from an A-frame ladder when he fell from the ladder to a lower level, breaking his right arm.",1
An employee was leaving the building to go home when she fell and landed on her right hip on the concrete.,1
"An employee was inside a box truck walking backwards while pulling out equipment on wheels when he overstepped and fell backwards onto a lift gate, fracturing his right arm.",1
"An employee fell, hitting his nose and forehead on the ground below. The employee was hospitalized for a head injury and lacerations to the nose and above the right eyebrow.",1
"An employee fell to the floor while walking, suffering a head injury.",1
"While drilling out a part in a milling machine, an employee's glove got caught in the drill bit resulting in amputation of the left index finger just past the nailbed.",0
"An employee was attempting to move a torch cart when the cart fell, striking the employee on the leg and pinning the employee on the concrete floor. The employee suffered a broken hip.",1
"An employee was using a 60-foot long pole to knock a piece of steel scrap loose from the heating section of a continuous annealer after a strip break when a refractory brick came loose and fell, striking the employee's hard hat and causing a concussion. A second employee sustained a head contusion when the fragmented refractory brick bounced off the first employee's hard hat and struck him in the head. The first employee was hospitalized.",1
"An employee was changing a floor filter in a spray booth. While the employee was sliding the floor grate back into place, the employee's finger was pinched between the grate and the floor. The employee suffered a fingertip amputation.",0
"An employee was unloading a truck of metal. The metal began falling off the truck, and a piece caught the employee's left hand against the bed of the truck, injuring the ring and little fingers. The little finger was medically amputated.",0
"An employee was beginning to install solar panels. Anchors and ropes had been installed for the job that day. While mapping out the job, the employee fell off the roof two stories to the ground and landed on his left side. He sustained a broken left arm and a broken pelvis.",1
"An employee reached onto a conveyor system to remove a jammed box when the employee's right middle finger was caught between the diverter belt and pulley, resulting in a fingertip amputation.",0
An employee was pulling a sheet of stainless steel from a rack when he dropped the sheet metal and it severely lacerated the back of his leg.,1
"An employee was operating an overhead bridge crane to move steel beams. The employee placed a beam on the floor to be staged, then unhooked the clamp from the beam. When the hoist was raised, a hook from the clamp caught on the flange of the beam causing the beam to fall onto the employee. He sustained bilateral open femur fractures and a pelvis fracture.",1
"An employee was changing a fan motor on an air conditioning unit. The employee fell from the top of the AC unit to the rooftop about 8 feet below, suffering broken ribs and a broken right collarbone.",1
"On July 29, 2019, an employee was cutting a hydraulic hose with a cutting saw when the employee's left hand contacted the saw blade and was cut. The saw blade was unguarded at the time of the incident.",1
"An employee was standing on a 12-foot step ladder when a powered industrial truck struck the ladder, causing the employee to fall and hit the floor. The employee received multiple facial, hand, and finger injuries.",1
An employee was stripping cable with a sharp tool when the tool cut his index finger.,1
"On July 29, 2019,at 10:30 a.m., an employee was preparing to add sugar product to a metering chute. He reached up into the metering chute to verify the equipment was off and his right middle finger was struck by a pneumatic slide gate. His finger was fractured and lacerated, resulting in a surgical fingertip amputation.",0
"An employee was lifting a cart onto the access floor with another employee. The second employee dropped his side and the injured employee could not hold the weight by himself. His left ring finer was smashed between the cart and the access floor, resulting in a partial amputation.",0
A machine operator was loading metal strips into a folding machine when his left thumb was caught between the machine's two clamping arms. He suffered an amputation to the thumb without bone loss. The machine was guarded at the time.,0
"Employees were core drilling into the foundation of a new 
building. When they finished drilling, they tried to pull the 
drill bit out of the machine using two wrenches positioned on 
either side of the drill bit. An employee was attempting to loosen the bit when the 
wrench came loose and struck the employee's right eye, requiring hospitalization.",1
An employee was disconnecting the back trailer from the converter dolly on the truck. There are hooked safety chains between the trailer and the converter dolly. The trailer dropped and pulled a safety chain tight. The chain caught his finger and caused the amputation of the right index finger to the second joint.,1
"An employee was installing a communication main line drop from an extension ladder and fell 15 feet to the ground, suffering a fractured vertebra that required surgery.",1
"An employee was bending over to pick up a crane outrigger pad when the outrigger retracted, catching the employee's left hand. The employee suffered a dislocation and laceration of the left wrist.",1
"An employee working in climbing gear was installing a new ground wire on a power pole. He made contact with a bracket for a security light, which was energized because the photo controller was improperly wired. After making contact, he donned ""secondary"" gloves and continued working. About 20-30 minutes later he lost consciousness and stopped breathing. He was hospitalized with cardiac arrest.",1
"Employees were lifting a metal plate with a chain and hoist. The steel plate was to be modified/outfitted with eyehooks. Once the eye hooks were welded onto the plate, the plate was lowered. As the plate was being lowered one of the welds failed causing the plate to fall and land on the employee's foot resulting in an amputation.",1
"An employee working on a tallow hot tank was loosening a clamp on a pipe when he was sprayed with 200 degree product, resulting in burns to his face, neck, chest, wrist, and hands. He was hospitalized.",1
An employee was operating a forklift when it drove off the dock. The employee suffered a head injury.,1
"On July 29, an employee slipped while walking down a staircase and suffered a bilateral quad tendon tear, requiring hospitalization.",1
An employee was washing a car. The door shut on her right ring finger and the tip was amputated.,0
"An employee was working on a portable sub-station with a battery and transformer when the employee suffered an electrical shock, burns, and a fall that required hospitalization.",1
"An employee was lowering a 120-pound helical screw into a centrifuge using a chain fall suspended from an I-beam. When the screw fell quickly into place, the employee's right ring finger was caught between it and the shaft. The fingertip was amputated.",0
"An employee was testing an electrical drive panel using an AC meter. A wire touched the employee's hand, burning it. The employee was hospitalized.",1
"An employee was setting up a press die when the die struck his left hand, resulting in amputations of the middle and index fingers.",1
An employee was setting up a precast concrete form when he began to feel dizzy and nauseous. The employee was hospitalized for dehydration.,1
"On July 30, 2019, a maintenance technician was standing on an 18-foot step stand, preparing to replace a light ballast. He was shocked while working with the 277-volt circuit and fell onto the stand. He lost consciousness and suffered burns and bruises to the hands, and was hospitalized.",1
"An employee was working at a customer's residence, installing fiber optic service. He began to feel cramping in his stomach and right arm and back area. He was hospitalized, suffering from heat-related dehydration.",1
"On July 30, 2019, a mold dropped while being put in position, pinching the tip of an employee's little finger against the frame of the machine. The employee suffered an amputation to the finger.",0
An employee suffered an electrical shock while plugging a cellphone cord into an outlet.,1
"An employee was feeding an extruder machine. As he tried to clear a jammed piece, the machine caught and lacerated his finger.",1
A fabric calendar operator's right thumb was caught between fabric and a roller. The tip of the thumb was amputated.,0
An employee was doing landscaping work in the sun when he began to feel ill due to dehydration.,1
"Employees were troubleshooting a T-nut machine. The machine started while an employee's right index finger was placed where the machine punches, resulting in a fingertip amputation.",0
"An employee was cutting out a caulk joint with utility knife when the knife was caught in the joint, causing the blade to slip and cut into the employee's left wrist.",1
An employee was clearing a carcass stuck in a carcass saw. The saw amputated the employee's right index finger.,1
"An employee was standing on a flatbed trailer, pulling a tarp over a load of cast iron pipe that was covered in plastic. When he went to step down off the cargo, his left foot slipped, breaking through the plastic cover and his left leg slipped in between the cast iron pipes. The employee sustained lacerations to the left calf and knee and was hospitalized.",1
"An employee fell approximately 50 feet from the roof of a water tower to the ground, suffering a broken arm that required hospitalization.",1
"An employee was standing at ground level, unloading a truck, when he fell into a cellar.",1
An employee working in the converting department felt cramps and looked pale and was hospitalized for dehydration.,1
"An employee was adjusting the setting points on a car lift which had a car on it. The lift raised up, trapping the employee's left index finger between the setting point of the lift and the undercarriage of the car resulting in the amputation of the left index fingertip.",1
"Two carpenters were hoisting an aluminum bridge between water tanks at a water treatment plant. The elevated load struck one of the employees in the torso, resulting in possible broken ribs.",1
"An employee was putting trash into a compactor when a large chair fell onto his chest, breaking his ribs.",1
"After clearing a jammed board, an employee was making a final adjustment on the molder/planer machine. Material was fed into the machine, causing the employee's hand to get pushed into the machine. The employee's left hand contacted the machine's cutting head and was amputated.",0
An employee was leaning against a sod harvester machine when his right thumb got caught between the conveyor belt and the pulley causing the amputation of the thumb from the first knuckle.,0
"On July 30, 2019, an employee was moving boxes onto a pallet when he felt a pinch in his lower left pelvic area. He was hospitalized due to a hernia.",1
"An employee was tearing off the existing roof on a residential structure when he fell approximately 8 feet to the ground below, fracturing his pelvis and collarbone. He was hospitalized and had surgery.",1
An employee was in a boat traveling back to a dam when the boat passed through an opened gate. The boat became caught on the gate and tipped over. The employee went underneath the water and suffered an amputation to 1/4 inch of the distal joint of the left ring finger.,0
"An employee was logging when a snag hit his leg. He suffered a broken kneecap and femur and was hospitalized, undergoing surgery.",1
"An employee slipped on a wet floor while walking through a break room, falling to the floor and breaking her kneecap.",1
"An employee was performing a structural upgrade on a tower. The employee's fall protection detached when a part of the tower was removed. The employee fell about 180 feet, striking an ice cover and an ice bridge, and suffered injuries to both legs, the right arm, and the chest.",1
Two employees were running a rig to brush a well.  One employee's finger was pulled into a pulley by a cable as he checked cable tension. The tip of his right index finger was severed.,0
"A cook was cleaning out the deep fryers. When she opened the valve to clean it, hot cooking oil shot out. The employee sustained burns on the elbows and hand, and got second degree burns on the right arm.",1
"While pulling a cart, an employee tripped on a piece of hardboard and fell, twisting and landing on her left knee. She suffered a broken left leg.",1
An employee experienced dizziness and weakness from possible heat stroke after being exposed to high temperatures generated by a melter.,1
"On July 30, 2019, an employee was scraping varnish away from a blade with a chisel. The chisel slipped off the blade and the employee sustained a tissue amputation to the right index finger that required sutures.",0
An employee was cleaning under the shake clipper when the clipper came down and amputated the left ring and middle fingers.,0
An employee amputated his right pinky finger while attempting to remove the workpiece from a drill press.,0
"An employee was washing a tank barge that contained a caustic product. The product splashed on his upper left arm, then spread to his waist and lower extremities, causing second- and third-degree burns.",1
"A 6-inch riser for sprinklers was being installed. To attach the riser to the system, an employee pulled off a 6-inch grooved cap. The system discharged air, which blew the coupling and cap into the employee's left thumb. The thumb was amputated and the employee was hospitalized.",1
"While an employee was removing a soffit support jack, the cushion block on the bottom of the soffit fell and smashed the ends of his right middle and ring fingers. He sustained an amputation of the right ring fingertip and was hospitalized.",1
An employee was preparing to close the site for the day and was securing the fence to the dumpster. The employee was struck by a roller machine and was pinned between the fence and dumpster. The employee sustained injuries to the foot and shoulder and also sustained a broken pelvis.,1
"An employee tripped and fell to the floor, suffering a broken hip.",1
An employee was hospitalized due to heat exhaustion.,1
An employee's finger was caught and amputated between a loader bucket and attachments.,0
"An employee was assembling parts in a clean room while wearing a new smock with a tightly woven hood. She became faint (possibly due to overheating), lost consciousness, and fell to the floor, breaking her hip. She was hospitalized, undergoing surgery.",1
A mechanical engineer technician was upgrading a load bearing machine from manual to automatic when his glove and right index finger got caught between the sprocket and chain. The right index fingertip was amputated.,0
"While standing up from a chair, an employee tripped over the strap of a bag that was on the floor. The employee fell to the floor, suffering a left shoulder injury.",1
An employee was working from a scaffold platform. The employee began vomiting due to heat exhaustion and was hospitalized.,1
An employee on a trailer was standing on a load of pipe while spreading a tarp. He fell about 6 to 8 feet off the trailer to the ground and hit his head on a forklift which was sitting next to the trailer. He sustained a head laceration and was hospitalized.,1
An employee was using an overhead crane to pick up a discharge head. His right hand was caught between the lifting apparatus and the discharge head; his right thumb was crushed and bone was broken.,1
"An employee was changing a light bulb from a ladder. The ladder slipped and the employee fell 18 feet to the floor, suffering six broken ribs, a broken pelvis, and a broken hip.",1
An employee was slicing potatoes with a food processor. The cutting blades caused amputations to three of the employee's fingers.,1
"An employee was working on a combine truck trying to get a part loose. The employee was using a blow torch when it exploded. The employee was hospitalized with severe burns, especially on the right leg, and smoke inhalation.",1
"An employee was using a remote-controlled, vehicle-mounted jackhammer to demolish an oven. While the employee was removing debris built up near the hammer, the hammer head crushed his left hand against the floor, injuring his index finger and thumb.",1
"An employee was helping a carpenter place handrail/guardrail material around pier holes, as well as moving lumber from material storage to the work area. He began to sweat excessively, then felt cramps down both legs, his arms, and his abdomen as well as nausea. He was hospitalized, suffering from heat-related dehydration.",1
"An employee became sick while working outdoors and was hospitalized with heat exhaustion, dehydration, and possible muscle damage.",1
An employee operating a stand-up lift truck in reverse backed into a parked lift truck and sustained a broken hip.,1
An employee was cleaning a rotary press machine with a rag when the machine's roller caught and crushed his left middle finger and amputated the ring fingertip.,1
An employee stepped down from a curb and suffered a hamstring injury.,1
"While walking to a door, an employee slipped and fell, suffering a left ankle fracture that required surgery.",1
"An employee was receiving irrigation pipes while standing on a moving trailer connected to a tractor. The employee fell from the trailer and was run over by the tractor/trailer, suffering fractures to the ribs, a scapula, neck vertebrae, and facial bones.",1
"An employee was positioning product on the shelves in the chip aisle. The employee then turned to walk, tripped over a display, and fell to the floor. The employee sustained a fractured hip.",1
"An employee delivering building materials fell from the truck to the ground, resulting in a fractured right ankle, a forehead laceration, and an injured wrist requiring hospitalization.",1
"An employee was waiting for a crane to bring him lifting chains so that he could attach them to a compressor being swapped out at an oil well site. He lost his balance and struck a muffler, which his fall protection was tied off to; the muffler fell to the ground and carried him with it. He suffered broken ribs and was hospitalized.",1
An employee was moving heavy floor mats out of a building and into his car. He suffered neck and back strains due to the heaving lifting.,1
An employee was in the center of the street applying marks to the pavement for placement of reflective buttons to mark the lanes. An SUV turned onto the street at a high rate of speed. It dragged the employee before running them over with the front and rear tires. The employee sustained injuries including: an open fracture to the left pelvis; fractured right pelvis; bilateral hip fractures; fractured bones near the eye and cheek bone areas; fractured nose; bruised right lung; bruised liver; and abraded skin and tissue of the face.,1
"An employee was rigging up a mold to an overhead crane. He fell into the mold storage pit, landing 7 feet below, losing consciousness, and suffering a broken rib. He was hospitalized.",1
"While leaving a classroom, an employee tripped over the baseboard or doorjamb. The employee suffered a broken pelvis and possibly a broken right arm.",1
"An employee was walking between two telehandlers. Her leg was caught on the fork support bar of one of them and its blade caught her foot. She fell backwards, breaking her right wrist.",1
"While marking gas lines at the side of a road, an employee was struck by a vehicle. The employee suffered broken bones and was hospitalized.",1
"The injured employee was helping another employee to drop a pallet with a forklift. The pallet was dropped and the injured employee's right index finger was smashed between it and a metal rack beam, resulting in hospitalization.",1
"An employee was standing by, waiting for other employees to finish stacking boxes. The lower boxes in the stack collapsed, causing the upper boxes to fall forward onto the employee breaking both legs.",1
An employee spraying product onto the ceiling of a building fell to the concrete floor from a 39-inch scaffold. The employee was hospitalized with a ruptured spleen and a left shoulder injury.,1
An employee was troubleshooting a heater treater on a water tank. A flash back from the heater burned the employee's face.,1
An employee was pulling a trash bag out of a trash bin that is on a wheeled base. The employee fell and fractured a kneecap.,1
An employee was moving hoses on a frac spread. He had the hoses over his shoulder when residual biocide from one of them flowed onto his shoulders and back. He later lost consciousness and was hospitalized to treat dehydration and skin rashes.,1
"An employee was doing demolition work on a concrete masonry unit wall with a sledgehammer. Part of the wall gave way and fell onto the employee, breaking his right leg.",1
An employee was working in a customer's attic above the second story. The employee fell two stories through the ceiling and landed on the concrete floor. The employee was hospitalized with a shoulder injury.,1
"On 7/31/2019, at approximately 11:07 AM, an employee was walking inside the facility when he was struck by a forklift and sustained multiple fractures to the left foot. The injured employee was hospitalized and had surgery.",1
"While being cut, a 20-inch metal pipe separated and a section struck an employee's lower right leg, causing broken bones.",1
"An employee was monitoring a tree climber. A tree was cut down, rolled into another tree, became airborne, and landed on the employee's right foot, breaking a bone. The employee was hospitalized, undergoing surgery.",1
"Two employees lifted a large animal. Later, one of them began feeling numbness and tingling in the legs and feet. She was hospitalized, having suffered a back injury.",1
An employee was helping to lift a C-channel cross member into place when the C-bolt channel clip amputated the employee's fingertip.,0
An employee was pulling fish out of a bin in a fish processing room. A fish's fin poked him through his glove. His right little finger was amputated.,0
"An employee was pumping raw milk. As he changed or shut a valve, his right fourth finger was sucked into a vacuum hose. The fingertip was amputated.",0
An employee was loading a steel cylinder cradle onto a forklift when the cradle slipped off the forks and hit the back of his head and other parts of his body. He suffered a fractured skull.,1
"After cutting a dead tree, an employee was pulling it down with a rope. As the tree came down it struck another tree, which caused a branch from that tree to break and strike the employee in the head. He suffered a concussion and a possible broken bone in his upper back.",1
An employee was working on an automated rebar bending machine when it severely lacerated his finger.,1
An employee was struck by a truck's rear wheel while directing traffic. The employee suffered a broken shoulder and severe abrasion to the back and neck.,1
"An employee was working outdoors on powerlines. On returning to the yard, the employee became ill and was hospitalized for heat stress.",1
"An employee was putting metal in a pot to melt. The top of the metal started to solidify; the employee was using a rebar to poke a hole in the top to mix the metal when some of the metal splashed onto coils outside the pot. This caused steam to build up and pressurize the metal, which expanded and flew out of the pot. The employee fell while trying to escape the splash, landing on metal that had hit the floor. The employee suffered second-degree burns to the hands, left knee, and stomach.",1
An employee was pulling plywood from a storage bin when he suffered a hernia.,1
An employee was disconnecting a hose when it struck him. He was burned by ammonium hydroxide from the hose.,1
"Two employees were replacing roofing panels from the platform of a lift. The lift made a sudden upward movement, causing one employee to hit a steel beam above. The employee suffered head injuries and was hospitalized.",1
"On August 1, 2019, an employee slipped on a freshly painted floor and fell, suffering broken vertebrae. The employee was hospitalized.",1
"An employee fell from a ladder, struck his head, and injured his back.",1
An employee was helping to hoist a pipe. The pipe swung and the employee's finger was caught between it and a beam. He suffered an amputation to the left middle finger.,0
"An employee was installing pipe with a pipe crew. The employee began to have leg cramps and was hospitalized, suffering from dehydration.",1
"An employee was grading lumber. A 1x4 board entering the trimmer skewed, causing the board to be cut lengthwise (instead of crosswise) and to be ejected from the saw. It struck the employee on the right side of the abdomen, causing a contusion. The employee was hospitalized.",1
"An employee was using a forklift to dump trash into a dumpster. He fell from the forklift or the dumpster to the concrete pavement, suffering a fractured skull.",1
"An employee was coming down a 16-inch lift when he fell, landing on the floor. He suffered back pain and leg weakness.",1
"A jackhammer smashed a finger on an employee's left hand against a structure, causing an avulsion.",1
"An employee was coming out of a stairway when an emergency door slammed on his finger, causing an amputation.",1
An employee was exiting his truck when he slipped on the ground which was wet from rain and slid down the incline against a retaining wall. He suffered a broken left hip.,1
An employee was filling cushions with blown polyester fiber. The employee's right hand was amputated in the machine's fiber opening drum.,1
"An employee was trying to flush a liquid bulk tank trailer with hot water. Hot water splashed from a valve in an adjacent bay onto the employee's left leg, burning the calf and the back of the thigh.",1
"An employee was checking on an in-service gas well because the gas had stopped flowing. As hot water ran through the system to melt built-up paraffin, the cap blew off the pipe and the hot water sprayed the employee's face. The employee was hospitalized.",1
Employees were using a forklift to move a 12-inch by 4-inch by 13-foot steel tube radius. The boom came down quickly and an employee's left foot was crushed between the tube and the ground.,1
"An employee was checking a movie theater auditorium when he fell down the stairs, breaking his ankle.",1
An employee was digging in a customer's yard when he came into contact with pesticides that had been used to treat the yard. He developed a rash the next day and was hospitalized for dermatitis and cellulitis.,1
"An employee clocked out for the day and was walking to her car. The employee stepped off of a curb, heard a pop in her right leg, and fell. She sustained a fractured right ankle, torn tendon, and calf strain. The employee was hospitalized.",1
An employee was punched in the face by another employee and was hospitalized with a head injury.,1
"At about 9:20 a.m. on August 1, 2019, an employee slipped on a spot of water in a hallway and fell, suffering a torn right hamstring. The employee was hospitalized.",1
"A boiler damper was closed, causing an employee to be exposed to carbon monoxide and lose consciousness.",1
An employee tripped while leaving a register bay. She fell to the floor and cut her head.,1
"An employee was in the street, using a blower to blow cut grass. A passing car struck the employee, causing a traumatic brain injury, a broken jaw and femur, skin abrasions, and an eye injury requiring surgery.",1
"While unloading a conveyor belt, an employee became faint, began to sit, twisted his ankle, and then fell and broke his leg.",1
A temporary employee was operating a rebar bending machine. His finger got stuck between the rebar and the pin for bending it and was injured.,1
"At about 11:15 p.m. on August 1, 2019, a stage hand was pushing a road case on stage when he fell (less than 6 feet) from the stage to the concrete floor. He hit his head, suffering a concussion, and was hospitalized.",1
An employee was mowing a lawn on a zero turn mower when the front wheel struck a gate. The employee suffered a contusion on the right leg and a broken left leg.,1
An employee reached up to pull a bag that had been sucked up by a rotary valve. The rotary valve amputated the tip of his left middle finger.,0
"An employee was repairing the steering column on a mobile crane. His hammer struck his right index finger, causing the amputation of the fingertip.",0
"At about 11:30 a.m. on August 1, 2019, an employee was working from a bucket truck, taking measurements of a telephone pole. A power line touched him, causing electrical burns. He was hospitalized.",1
"An employee was cleaning cement off an end dump trailer's tailgate latch. The tailgate closed, pinching the employee's left ring finger between the gate pin and the latch and amputating the fingertip just above the nailbed.",1
"While leaving an exam room, a nurse tripped over the exam step and fell to the floor, suffering a broken left humerus. The nurse was hospitalized, undergoing surgery.",1
"At about 12:00 p.m. on August 1, 2019, an employee was leaving a cafeteria when her foot caught on rubber flooring and she fell, breaking both kneecaps. She was hospitalized.",1
An employee was trying to check the tension on a belt and pulley attached to a pump assembly. The motor started and the employee's fingers were fractured and amputated.,0
"An employee was exiting an elevator when he tripped and fell, hitting his head on a wall. The employee sustained a concussion and a fractured left hip.",1
"Employees were inspecting a joint of pipe on a rack. Another joint of pipe, rolling from the blast line toward the inspection rack, rolled over the stops and struck one of the employees, breaking his leg. He was hospitalized, undergoing surgery.",1
"An employee was pulling a bologna tree (rack) on a rail system to an oven when the tree snapped and fell on his left leg, breaking it.",1
"An employee was being trained on how to use a punch press. The punch activated while his hand was under the die, amputating the tip of his left thumb and the top of his right index finger.",1
"An employee was hooking the latch from a truck to a dumpster. The truck's lifting lever was engaged, and the employee suffered a partial thumb amputation in the pinch point.",0
An employee was riding on an amusement park's mountain ride. He lost his balance and came partly out of the cart; his arm hit the track and his arm was broken.,1
"A no-bake foundry operator was cleaning sand from a mixer discharge. The sand mixer blades came into contact with the employee's fingers. About an inch of the left index finger was amputated; the employee was hospitalized, requiring surgery to other fingers.",1
"An employee was on a piece of machinery retrieving something. He slipped and fell about 2 feet to the ground, where he hit his head on the pavement.",1
"An overhead crane was being used to stack 4-by-4-by-20-foot steel beams on an existing pile of beams. An employee was walking through the area when a stack of about 20 beams from the pile collapsed and struck the employee's legs, breaking both of them.",1
"An employee was moving a gearbox when it landed on his index finger, amputating the tip. He was hospitalized.",1
"At 3:00 p.m. on August 2, 2019, an employee was trying to relight a pizza oven's pilot light when an explosion occurred and fire burned him. He was hospitalized.",1
"An employee had climbed a ladder to diagnose a jammed conveyor belt. An industrial ceiling fan's rotating blades struck his head, causing contusions and cuts. He was hospitalized.",1
"An employee was loading a trailer when his foot became lodged between a bar and a moving conveyor belt near the tail of the belt. His right ankle was broken and he was hospitalized, requiring surgery.",1
"An employee was working from a ladder on a trailer, covering glass with a tarp. The tarp got caught on something. The employee lost his balance and fell to the ground, suffering a broken neck.",1
"A machine operator was moving a 4,200-pound steel plate into position onto an oxy burning table, about 2.5 feet above the floor. The employee was on the table, moving the plate into position using an overhead crane and a bar walker magnet, when the plate got hung up. It then popped up, shifted, and struck the employee in the leg. He fell off the table and suffered a compound fracture to the left leg.",1
"An employee fell to the ground from a 5-foot ladder, suffering head trauma.",1
"An employee was at a substation removing a bird's nest. The employee suffered a 7,200-volt shock and was hospitalized.",1
An employee's right hand was caught between a hanger and a stationary part of a clothing conveyor system. Three fingers on the employee's right hand were crushed. The tip of the right index finger was amputated up to the first knuckle.,1
An employee fell and hit her head. She was hospitalized.,1
"An employee was moving a scissor lift between rows of stacked wood to apply end tags. As the lift rose, her left hand was pinched between its handrail and a stack of wood. A fingertip was amputated.",0
"An employee fell about 4 feet from a ladder, hitting his head on the floor and suffering a concussion.",1
An employee was notching metal material on a notcher machine and amputated the right middle finger at the first joint.,1
An employee was cleaning a pep machine when a moving chain amputated one of his fingers.,0
"An employee was getting off a tractor to close a gate. The tractor moved backward and the front tire knocked him down. He suffered a dislocated hip, a dislocated shoulder, and a possible hip fracture.",1
"While replacing a ceiling light fixture, an employee was shocked and fell. The employee's head struck the floor, and the employee was hospitalized with head trauma.",1
"An employee was using a crane with a hand-held pendant to turn over a piece of railroad rail (up to 80 feet long, weighing up to 2,000 pounds) on a work table. The rail rolled toward him and broke his left arm.",1
An employee was retrieving a fallen part from a shot blast machine. The employee's lower left arm was pinched and lacerated between the rotating internal bed and the machinery wall.,1
"An employee was using a half-gallon metal transfer ladle. After she finished the transfer process, the kettle sat on a hot plate. She was clearing a wax chunk from its inside lip when the chunk fell into the kettle and splashed hot wax on her hand. She suffered burns to both hands (mainly the back of the right hand) and possibly on the back of her neck.",1
"An employee was working on a 12- to 15-foot aluminum aircraft floor beam resting on a table. The employee tripped on the table leg and, as she fell to the floor, the beam fell onto her. She suffered a broken right hip and was hospitalized for surgery.",1
"An employee was operating a standup forklift. A metal rack made contact with the employee's right foot, causing lacerations. The employee was hospitalized.",1
"An employee was unhooking a cable from a block of metal. The end of the cable was fitted with a quick disconnect device. As the employee removed the cable, the device closed and cut the employee's left middle finger. The employee was hospitalized for infection prevention.",1
"An employee was standing in front of a deli department when a customer's shopping cart struck her. She fell to the floor and suffered pelvic fractures, and was hospitalized.",1
An employee was in a receiving area when a roll-up receiving door fell off the wall and struck the employee on the arm. The employee suffered a cut and bruising and was hospitalized.,1
"An employee was descending in an aerial lift when his right shoulder made contact with an energized power line (138, 000 volts, about 25 feet from the ground). He suffered burns from the right side of his neck to his pelvis and was hospitalized.",1
"An employee was closing a 2-inch ball valve on a test separator to make repairs to the down side of a low-pressure sand knockout. The employee was about 2 to 3 feet from the ball valve as he closed it; when he got the valve three-quarters closed, the bell reducer pipe on the back side of the ball valve separated in two, releasing pressure in the test separator. The employee suffered sand blast burns to the left side of his body, a broken arm, a sprained ankle, a fractured back vertebra, and a head laceration.",1
"While an employee was filling a drum/tote on the production floor, an e-cigarette that was in his pocket caught on fire. The employee sustained burns.",1
"Three HVAC mechanics were trying to stop a water drip from a steam line. They isolated the line upstream and downstream from the location of the leak. One of the employees cracked open a pipe union to drain the condensate from the line. Steam began to release from the pipe union unexpectedly, causing second-degree burns to his right hand and arm. He was hospitalized.",1
An employee was working in a body manufacturing shop when his fingers were caught by a conveyor. Two fingertips were amputated.,0
"An employee was cutting 10-inch-wide, 1,600-pound concrete piles from inside a 15-foot-deep excavation. A pile fell on him, breaking his back, pelvis/hip, and upper and lower leg.",1
"On August 3, 2019, an employee was putting feed in a kennel when a dog bit the tip of the employee's ear off. The employee was hospitalized.",1
"An employee was painting touch-up areas while on a suspended work platform. The employee fell 12 feet off the platform, landing on a hard surface and suffering a back/shoulder injury. The employee was hospitalized.",1
An employee was cleaning a bean-grading machine in preparation for sanitation. The employee was opening the doors to clean the machine with a power washer when his right ring finger was caught by a roller with a solid bar. The finger was amputated at the second knuckle.,0
An employee was splashed with hot tar after a machinery malfunction.,1
"An employee was working at a nurse station. A member of a patient's family sprayed deodorizer at the door, causing an allergic reaction and severe respiratory distress in the employee. The employee was hospitalized.",1
An employee was removing batteries from a substation battery house when a flash fire caused first- and second-degree burns to his face.,1
"An employee loaded a piece of rebar onto a rebar bending machine. His finger was in a pinch point between the end of the rebar and a positive stop on the machine when the machine was cycled, resulting in an amputation of the upper portion of his left index finger.",0
"Approximately six hours into his shift, an employee was sweating profusely and came into the air-conditioned quality control lab to cool down. The employee became ill, lost consciousness, and was hospitalized with heat exhaustion.",1
"While getting out of a truck, an employee slipped on a step and fell to the ground. The employee's lower leg was broken.",1
"During the unloading of a vessel, an employee was disconnecting twist locks from shipping containers. A twist lock from a container above the employee fell and struck the employee in the face, causing facial fractures.",1
"While cleaning under a conveyor, the employee became entangled in the conveyor and suffered a strangulation injury.",1
"An employee was dismantling the jib on a crane. When the connecting pin was removed, the jib shifted, striking and lacerating three fingers on the employee's left hand.",1
An employee was doing maintenance on a skinner machine. His finger was caught in a belt and amputated above the first knuckle.,0
An employee became dehydrated (due to the weather) while overseeing a pipeline project.,1
"An employee was pulling a manual pallet jack when the pallet jack became stuck by pitting on the floor. When the pallet jack became free, the wheel ran over the employee's foot causing lacerations to the second and third toes on the right foot.",1
"An employee's foot got stuck in some shrink wrap that was hanging off a vendor's pallet. He tripped, hitting his head on another pallet and suffering a head laceration and fractured vertebrae.",1
"An employee was washing a drill stabilizer (100 pounds per foot, about 8 feet to 10 feet long) when it fell, striking the employee on the right foot between the big toe and the second toe. The big toe was medically amputated.",1
"On August 4, 2019, a maintenance mechanic was tracking plastic film through a package-sealing machine during a setup process. A film clip caught the mechanic's jacket, pulling the mechanic's right hand toward the chain and gear. The mechanic suffered amputation of the middle and fourth fingertips.",0
"On August 4, 2019, a hose in a pump house water pit disconnected while a valve was being opened. Steam burned an employee on the left side of his body.",1
An employee fell to the ground while walking. He suffered contusions to the head and left hand and was hospitalized.,1
"An employee was pulling a cart loaded with supplies out of a truck. He fell off the lift gate, got his leg caught on the gate, and was left hanging upside down. He suffered broken bones in the lower right leg.",1
An employee was using a meat saw to cut marrow bones into smaller sections when his right hand slipped and contacted the blade resulting in a deep laceration to his right index finger.,1
An employee slipped on the second step of a stairway and fell to the concrete ground. The employee was hospitalized with a concussion and a subdermal hematoma.,1
An employee helping to unload a telehandler had his hand caught between the telehandler's carriage and the wall board.,1
A technician was troubleshooting a multi-spindle CNC lathe which is used for metalworking. The technician was manually spinning the spindle which causes the belt and pully to spin. The injured employee’s hand became caught in the machine resulting in an amputation to the left index finger.,0
Employees were using a forklift to move a piece of steel onto a structure when an employee's hand was caught between the steel load and the structure. The employee sustained a crushing injury that resulted in amputation of the right ring fingertip.,0
"An employee had leaned a small ladder against the truck in order to load a larger ladder onto the truck. The ladder he was on slipped and he fell backwards about 2 feet to the asphalt, hitting his head.",1
An employee was driving a standup forklift to transfer a pallet from the production area to a warehouse. The forklift veered off course and struck a concrete wall. The employee’s left foot was caught between the forklift and the wall. He sustained a fractured left foot and ankle.,1
An employee fell down a set of stairs and was hospitalized with a dislocated shoulder and cracked ribs.,1
"An employee was changing a tire on a tractor. The jack stand that the tractor was on had a piece of wood underneath because the ground was not level. The piece of wood cracked, and the jack stand slipped. The tire came off the lugs and struck the employee. The employee was hospitalized with a ruptured spleen and had surgery.",1
An employee was cleaning a paint gun at the end of the day when a paint and water mixture was injected into his left middle finger. The employee was hospitalized.,1
"The employee was working on a radiator on a forklift. A fire truck backed up into the employee, impaling the employee's left forearm between the truck and the radiator bolt.",1
"An employee developed heat stress while cleaning a plant site and securing a load to a semi-trailer throughout the day, requiring hospitalization.",1
"An employee fell from a ladder while accessing a mezzanine, suffering four cracked ribs and a fracture to the base of the head.",1
"While being moved, a modified handicap vehicle with the pedals reversed, drove forward and an employee was pinned between the van and a workbench. The employee suffered crushing injuries.",1
An employee had completed approximately seven hours and forty-five minutes of mail carrying duties. He returned to the post office and went to the break area. He was observed to be ill but was responsive. The employee was hospitalized for a heat-related illness.,1
"An employee was using a router with a diamond bit to cut a granite slab. While the tool was running, the diamond outer shell broke and a piece of the broken router bit struck another employee in the eye.",1
"An employee was driving a forklift with a dump bucket attachment full of dirt. The employee stopped the forklift and prepared to dump the bucket. When he pulled the manual latch of the dump bucket, the bucket slid backwards toward the lift. One of his fingers was caught and partially amputated between the forklift and the bucket.",0
"An employee was bending over to remove a license plate from a car. He then stood up, lost his balance, and fell to the ground. The employee sustained a contusion to the left side of the forehead, a subdural hematoma, and a laceration above the left eye.",1
"On August 5, 2019, an employee was operating a stand-up forklift when the forklift struck a horizontal PVC pipe that is suspended by chain and used as an area barrier. The end of the pipe shattered and pieces fell to the floor. The employee sustained lacerations to the left side of the face and bone fractures resulting in surgery.",1
An employee had entered the auto stacker area to straighten wood when his clothing became entangled in a rotating shaft. The employee was hospitalized with a pelvic injury that required surgery.,1
"At 7:40 a.m. on August 5, 2019, an employee slipped and fell on a wet floor, suffering contusions and left hip and leg pain. The employee was hospitalized.",1
"An employee was trying to get a sick steer out of a pen. The steer tried to return to the pen and his horse tried to stop it. The employee's horse then fell to the ground with him still on it, causing the horse to fall on his left leg. With help from another employee, the injured employee was able to get his foot out of the stirrup. His ankle broke in two locations and he suffered a blood clot in his left leg, requiring hospitalization.",1
An employee was stripping formwork from poured concrete using a prybar when the prybar slipped and caused him to lose balance. The employee stepped back onto a piece of plywood which caused his foot to twist and fractured his right leg.,1
"An employee was working from an elevated platform. When the employee grabbed a wire rope guardrail, the guardrail collapsed, and the employee fell head first approximately 6 feet into a lift basket. The employee sustained bruising to the spinal cord, fractured vertebrae, and a broken nose.",1
An employee was struck by a forklift and sustained a laceration to the right leg and amputation of the right foot.,1
"Two employees were removing a motor from an overhead bracket and turned to lower it to the floor. As they were lowering it, one of the employees had his left middle finger caught and crushed between the motor and a 12-inch chute. The employee sustained amputation of the distal phalanx.",0
"On 8/05/2019, an employee was standing on a wood shelf while dismantling an upper shelf. The shelf that the employee was on broke and he fell about 5 feet to the floor. He sustained a dislocated knee.",1
An employee fell from the roof of a single-story residence while bringing product up to the roof. The employee suffered a broken ankle.,1
An employee was working on a 7.6 kV electrical switch gear panel to add a new cable. The employee was electrocuted and sustained burns to both feet and the right hand.,1
An employee was tied off in a scissor lift approximately 15 feet high when a beam broke loose and overturned the scissor lift. The employee sustained a shattered wrist and fractured hip.,1
"An employee was installing raptor control on a powerline when the employee contacted the 7,200-volt line jumper. The employee was hospitalized with a burn to the right index finger.",1
"While entering a 3-foot trench, an employee fell onto the handle of a shovel. The employee was impaled by the handle, and sustained injuries which included a perforated intestine and a broken rib.",1
"An employee was running cables in an office ceiling. While ascending a 6-foot A-frame ladder, he fell to the floor and sustained a broken right clavicle, skull fracture, and a brain aneurysm consistent with a concussion.",1
"An employee was climbing a ladder to trim a palm tree. Before reaching the top, to tie the ladder to the palm tree, the employee fell backwards off the ladder. He landed on the brick patio 10 feet below and sustained fractured vertebrae in the neck and back and fractured ribs.",1
An employee was stacking pallets when a forklift ran into him and pinned him against pallets. The employee sustained crushing injuries to the abdomen and a collapsed lung.,1
An employee was uncoupling semi trucks via the temporary fifth wheel connection. The trucks had been setup in the piggy back configuration for transport. The employee was pinned between two semi trucks and sustained a fractured jaw and a head laceration.,1
An employee was walking behind the planter machine that was planting sugar cane. While on break the employee collapsed. The employee was hospitalized for heat stroke with complications.,1
"An employee was standing in the cab of his truck, in a bent position, adjusting the shifter boot. He stepped backwards, lost balance and fell from the cab. He sustained injuries to the hip, back, and head, as well as a brain bleed.",1
"In preparation to cut rebar, a Bechtel Construction Services employee was picking up a battery-powered band saw from the ground with his right hand. He simultaneously reached underneath the housing of the band saw and grasped the blade with his gloved left hand. The band saw activated and caused a laceration to his left index finger.",1
"An employee was walking down a two-step stairway, and either missed a step or his foot gave out. The employee landed on the floor and fractured a hip.",1
"An employee was checking fuses at a 480-volt control panel when a flash fire occurred burning the employees face, left hand, and right forearm.",1
An employee was hospitalized due to stress-related angina.,1
An employee was responding to a quality issue with a piece of equipment that had a fixture out of place. The clamp was under pressure with air and continued to move once the fixture was back in place. The clamp then pinched the employee's left middle finger and tore off the nail and fingertip.,1
"While in pursuit of a suspect in the desert, an employee ran through a mesquite bush that caused a puncture injury requiring hospitalization.",1
"An employee was riding an ATV to the next prairie dog town. The ATV went into a drainage ditch that was hidden by vegetation. As the employee fell into the ditch their head struck an adjacent embankment. The employee initially lost feeling below the neck, and later recovered some sense of touch. The ditch was approximately 5 feet deep by 4 feet wide.",1
"An employee was delivering mail to a house when a dog came out of the door and bit her left hand, left wrist, and right leg. The employee was hospitalized.",1
An employee was replacing the hydraulic assembly on a trailer when the third fingertip on the employee's left hand was amputated in a pinch point.,0
"An employee was unloading a dump trailer when the dump trailer tipped over and caused the truck to tip over on the passenger side. The employee sustained a head contusion, kidney laceration, four broken ribs, and a punctured lung.",1
An employee was using a table saw to make a drawer box for a cabinet. The drawer side kicked back and the table saw amputated the employee's left middle finger above the first knuckle.,0
An employee was throwing laundry down a linen chute when the chute door closed on the employee's left ring finger.,1
"An employee was opening a vessel's pump valve when hot pressurized water inside the vessel splashed out and sprayed the employee. The employee received second degree burns to the legs, chest, and arms.",1
"An employee was cleaning and sweeping around a conveyor when his left arm got caught in the conveyor belt, pulling him onto the conveyor. The employee was hospitalized with torn skin and muscle around the left arm at the shoulder.",1
An employee's left index fingertip was amputated by a power press.,1
An employee had two fingers amputated by the powder die in a mechanical power press.,0
An employee was bitten on the leg by a spider while cleaning cobwebs and developed an infection.,1
An employee fell from a step ladder to the ground and sustained broken bones.,1
"While removing a 60 x 48-inch glass window in a school gym, an employee fell 12 feet from the bleachers. The employee struck his head on the concrete floor resulting in a fractured skull, brain bleeding, and swelling of the brain.",1
"On August 6, 2019, an employee was picking his shipment on a standup forklift. As he was backing up with the load, his left foot was caught between the forklift and an I-beam. He sustained broken toes and a partial amputation of the big toe.",1
An employee tripped and fell while walking into the office. The employee was hospitalized.,1
An employee fell from a ladder.,1
"An employee fell from atop a tractor trailer, landing on the ground and suffering a dislocated left elbow and two torn ligaments.",1
"An employee had completed his shift as a delivery driver. Later, while at home, he felt ill and was hospitalized for kidney problems possibly associated with heat and dehydration.",1
"An employee was preparing to transfer hydrofluoric acid. A transfer pump motor/gear needed repair in order to transfer the hydrofluoric acid. The employee removed the pump, made the repair, and returned to reassemble the pump. The employee was splashed by hydrofluoric acid and sustained chemical burns to the torso.",1
An employee was manually lighting burner boxes on hot oil trucks. When using a cigarette lighter to ignite a pilot burner a liquid propane gas flashback (woof) occurred and the employee suffered flash fire burns to the face and lungs.,1
"An employee was torch-cutting a coupler off a railcar. The coupler fell onto the employee's left foot, breaking it.",1
"At 9:30 a.m., on August 6, 2019, an employee was using a ladder to reach the edge of a ceiling. He fell 12 feet from the ladder, suffering a broken left femur and tibia. He was hospitalized.",1
"While stepping onto the track of a bulldozer, an employee sustained a bilateral quadriceps tendon rupture. He was hospitalized.",1
"An employee was using a circular saw to cut roofing decking. The saw became stuck, then came loose and cut the employee's right and left forearms.",1
"An employee entered a room to check trash bins. She tripped on a table leg, fell and broke her hip.",1
An employee driving an electric pallet jack collided with another employee driving a forklift. The pallet jack driver sustained injury to the left heel.,1
"On August 6, 2019, an employee was supervising the renovation of an elementary school. He was reconnecting a light fixture to the power source when he was electrically shocked and fell about 8 feet from an A-frame ladder to the floor. He sustained burns to his hands and dislocated his left knee cap. He was hospitalized and required surgery.",1
"An employee was using an electric jackhammer to break up rock under a pipeline. Flammable gas reacted with the electric motor of the jackhammer, causing a flash fire. The employee was burned on the forearms and face.",1
"While setting up an I-beam for installation, an employee's right big toe was amputated by a pile driver.",0
An employee was pressure washing a rig when the employee began to see spots and experienced dizziness due to dehydration.,1
"An employee had stepped off a forklift to scan product when pallets behind him fell and struck him, causing a right hip dislocation.",1
"On August 7, 2019, an employee experienced cramps and was hospitalized due to heat stress.",1
"An employee had climbed onto a plasma cutter table to retrieve cut-outs. While the employee was stepping off of the plasma table, part of the grate bent, causing him to fall and hit his head on the plasma track. He suffered a large laceration on top of his head.",1
An employee was pressure testing a container when the lid blew off and injured his left elbow.,1
"An employee was manually repositioning a full 55-gallon drum when the employee's left index fingertip was caught between the rim of the drum and a second 55-gallon drum, resulting in a fingertip amputation.",1
An employee was attempting to remove a jammed product from a griddle discharge conveyor. The employee went under the conveyor to remove the jam and scraped their left hand on the ground. The scrape became infected.,1
An employee was standing on top of forklift forks when the forks were lowered and the employee's finger was caught in the hydraulic pinch point. The employee's left index fingertip was amputated.,0
"An employee was installing plywood on a roof. The plywood was staged on forklift forks that were raised approximately 12 feet. The employee climbed from the roof onto the forks of the forklift to retrieve the plywood. The employee was kneeling on the stack of plywood when it fell to the ground. The employee fell with the plywood approximately 12 feet onto concrete, requiring hospitalization for a fractured left ankle.",1
"An employee slipped and fell on the floor while entering the break room, suffering a hip fracture.",1
An employee was using a pipe wrench to tighten a fitting when the wrench amputated his little finger.,0
"An employee was operating a trim saw to trim boards to length. He fed the board material into the discharge side of the saw at which time his glove was caught on the chain conveyor, pulling his hand into the blade. The index finger and ring finger on his right hand were severed.",1
An employee experienced cramping in his hands and arms due to heat stress.,1
"An employee fell off a stack of pallets to the ground, dislocating his foot.",1
"After returning an item to the produce section, an employee was walking back toward the cash register area when his left shoe caught on the floor causing him to lose balance and fall onto his right side. He was hospitalized with a fractured right hip.",1
An employee was using a hose to spray an overhead conveyor while on a six-foot extension ladder. The employee lost balance and their hand became caught in the running conveyor belt. The employee sustained three broken fingers and a partial degloving of the left hand.,1
"An employee was working outside at a saw mill, sorting boards on a green chain line. He began to suffer from heat-related illness and was hospitalized.",1
"An employee was performing stucco work using a scaffold when the scaffold collapsed and the employee fell to the ground. The employee was hospitalized with a broken left shin, shattered ball area of a foot, and two fractures to a finger on the right hand.",1
An employee was stepping down from the back of a shuttle/vehicle and landed awkwardly resulting in a fractured ankle.,1
"An employee was feeding sassafras leaves into a hammer mill when the bottom of the cyclone dust collector connected to the milling machine became clogged. While clearing the clog, her hand was caught in the rotating impeller of the cyclone dust collector. All fingers on the right hand, except the thumb, were amputated near the first knuckle.",1
"An employee went to remove a gladhand lock from a trailer when a yard jockey backed up and struck the employee, resulting in broken/bruised ribs and a collapsed lung.",1
"While operating a fiberglass mat cutter, an employee's finger was caught in a pneumatic clamping mechanism. The employee sustained an amputation to the left index fingertip.",0
"An employee had used a prybar to remove an un-flattened end of a new coil, and was standing on the coil in an attempt to feed the end into the shear. The coil was moved, and the employee's left foot was caught and fractured between the coil and a hold-down roller.",1
An employee became overheated and suffered heat exhaustion while working in a manhole.,1
"An employee was on a ladder attempting to put a belt on an exhaust fan when the fan began spinning.  The pulley popped out and hit him on the head, knocking him off the ladder. He suffered a cervical spinal cord injury.",1
"An employee was stepping off a stand-up forklift in the battery charging area in order to charge the lift. The lift moved as the employee stepped off, and it pinched his right ankle between the lift and a metal cart. The employee was hospitalized for a broken right ankle that required surgery.",1
An employee was using a mud mixer (hand-held) when his hand entered the bucket with a rag. The running mixer amputated his pinky finger.,1
An employee was walking around the property when he became dizzy and had to sit down. He was hospitalized due to heat stress.,1
"Two employees were moving a 55-gallon drum containing windshield wiper fluid. One of the employees had to re-position the barrel from the vertical to the horizontal position using a rocking stand and strap. As the employee was positioning the barrel, it slipped. The employee's right pinky finger was caught between the drum and stand, resulting in a finger amputation.",0
"After delivering packages to customers, an employee began to suffer heat-related illness, arm pain, and vomiting. The employee was hospitalized.",1
"On August 7, 2019, employees were diagnosing a malfunctioning grease pump that is used to grease truck joints and moving parts. When the injured employee lifted the pump, the cylinder located inside the pump fell and lacerated the employee's left ring finger which later resulted in amputation of the fingertip.",0
An employee was loading bundles of shingles onto a two-story home when he lost his footing and fell to the lower surface. He suffered back and knee injuries.,1
An employee working in a residential bathroom fell while climbing or while on top of a 5-foot tall single-stage scaffold. The employee sustained a head injury.,1
"An employee was unloading a trailer when the employee slipped on liquid soap and fell to the floor, suffering a broken tibia and fibula.",1
"An arborist was working in a tree, approximately 30 feet above grade, when a felled branch contacted a single-phase electrical line. This caused the employee to sustain an electrical shock and burns.",1
"An employee's finger was mashed between a trench box spreader and the shackle of an excavator, resulting in a fracture and laceration to the left ring finger.",1
An employee was installing plumbing when sharp metal scratched and cut the lower part of his leg.,1
"An employee was using an excavator along with a chain to pull a dump truck that was stuck. The chain broke and hit the employee in the chest causing a laceration, a bruise, a cracked sternum, and also caused his heart to beat out of rhythm. The employee was hospitalized.",1
"An employee was assisting with services related to cementing (closing) an oil well when a valve detached from the wellhead under pressure. Part of the valve hit the employee's legs, fracturing the left tibia and fibula.",1
"An employee was power washing equipment with a gas-fired, truck-mounted unit. The employee felt ill and was hospitalized with muscle pain and chest pain due to dehydration.",1
An employee was operating a sit-down forklift to stack pallets when they fell over. The employee got off the forklift to straighten them and was struck by additional falling pallets. The employee was hospitalized with sternum and rib fractures.,1
"An employee was delivering a refrigerator when it slipped off the dolly, falling on his ankle and breaking it.",1
An employee was operating a hydraulic compactor during product packaging. The compactor amputated the employee's left hand.,1
An employee was lifting an empty pallet when he felt a pop in his lower back. He was hospitalized with bulging discs in his lower back.,1
"An employee fell while climbing a portable ladder, landing on the ground and suffering a broken left arm and lacerations.",1
"An employee was working on a gas line when a gas leak caused a small explosion/fire, burning the employee's hands.",1
"An employee was repairing a refrigeration unit and determined that there was a defective electrical switch. Other contractors were at the facility bleeding a gas line at the time. The employee went to the circuit breaker to shut off power by manually flipping the breaker when an explosion occurred. The employee suffered second degree burns to the upper body, including the face, arms, and hands.",1
"An employee tripped on a curb while walking into a bank. The employee fell, breaking his wrist and ankle.",1
An employee received an amputation.,0
"While walking across a yard, a mail carrier stepped into a divot concealed by grass. The employee suffered leg fractures and was hospitalized, requiring surgery.",1
An employee installing a roof membrane was hospitalized with heat stroke.,1
An employee was assisting a supervisor to clear jammed material from a machine. A 40-pound knife blade moved and amputated the employee's right index fingertip.,0
An employee was climbing a fiberglass ladder when the ladder snapped and the employee fell 10 feet to the ground resulting in fractures.,1
"An employee was walking out of the facility when he tripped/slipped on an object on the floor, falling forward and hitting his head and left shoulder on the floor.",1
An employee was bending down into a receiving bin retrieving boxes when an empty box slid down the chute and hit the employee in the back of the head. The employee was hospitalized with swelling of an arterial vessel.,1
"An employee fell off a ladder to the ground, suffering a fractured shoulder and hip. The employee was hospitalized.",1
"An employee was ascending a ladder to remove a drop (phone line) when the employee fell off the ladder to the ground, fracturing a wrist and ribs. The employee was hospitalized.",1
"An employee was climbing an aluminum extension ladder. The employee fell up to 26 feet to the ground, suffering injuries to both heels, both ankles, the left elbow, the left fibula, and the head.",1
"An employee was on a ladder cleaning a grill hood. She fell from the ladder, breaking her right kneecap.",1
"An employee was cutting plywood on a table saw when a piece of plywood kicked back and struck the employee's abdomen, puncturing it.",1
"An employee was setting up to cut a cable and needed to release a come-a-long that was attached to the temporary suspender at the cable. At this point, the temporary suspender spun and pinched the employee between the existing suspender and temporary suspender assembly. The employee suffered a broken left tibia and fibula, dislocated right knee, and cut head.",1
"Employees were working on a muller wheel. One employee was standing in front of a forklift that another employee was operating. The muller wheel came off the forklift and landed on him, striking his lower right leg and both feet and causing multiple fractures.",1
"An employee slipped on wet grass while using a shovel to remove it, falling backwards and striking his head on asphalt paving. He fractured his skull/head.",1
An employee was moving a battery when his right ring finger was pinched and amputated between two large batteries weighing 2700 pounds.,0
An employee was walking backwards pulling a hand cart containing batteries. One of the employee's feet came in contact with a concrete curb causing the employee to fall backwards and hit their head on the ground. The employee sustained a contusion to the head and a blood spot on the brain.,1
"An employee climbed a ladder to the roof, opened a hatch door to the roof, and then opened a gate at the top of the roof hatch. When she opened the gate, her finger was caught and crushed in the gate hinge, causing a severe laceration and fracture of the right index finger.",1
"An employee was using a band saw to cut a piece of copper pipe when the employee's left finger contacted the saw blade, resulting in a finger amputation.",1
"An employee was walking up a ramp from the street to the building when he fell on the ramp. His leg hit the ramp floor, injuring his left knee/thigh and causing a hematoma.",1
An employee was using a meat grinder to tenderize round steaks when her gloved left hand became caught in the blades. The employee sustained lacerations and torn tendons.,1
An employee was driving his vehicle (golf cart style) to an aircraft when he passed by two large baggage carts and was T-boned by another vehicle. He was hospitalized with a broken left leg.,1
"The injured employee was assisting other employees move a steel beam to a staging location using drywall carts. Once in place, the beam was lifted using rigging and an electric pallet jack. The carts were removed, cribbing was placed, and the beam was lowered onto the cribbing. As the pallet jack backed up, the beam rolled onto the injured employee's right leg causing a lower leg fracture.",1
An employee was operating tongs when the tongs lacerated the employee's right thumb.,1
"While using a ladder to clean rain gutters, the ladder contacted an electrical line. The employee was hospitalized for electric shock and burns to both hands.",1
An employee tripped on carpet in an office area and fell sustaining a fractured hip that required surgery.,1
An employee was operating a stock picker and got caught between the stock picker and a pallet rack resulting in a fractured pelvis.,1
"An auto technician was under a 30-foot RV in a parking lot, installing a spare tire. The jack the RV was on slipped, pinning him under the RV. He suffered 15 broken ribs, a punctured lung, and a lacerated liver and was hospitalized.",1
"An employee was using a clam-shaped curing press to vulcanize tires. The employee had to hold a tire in the press as a bladder inflated. The employee's right hand got stuck between the tire and the bladder; the curing press cycled while the employee's hand was stuck, causing open fractures to the middle and ring fingers.",1
"An employee was removing a tractor tire when the employee's right index finger was pinched between the hub and the rim, resulting in an amputation of the fingertip flesh.",0
An employee was performing maintenance on a drill rig when a chain coupler dislodged and struck the employee's lower back. The employee suffered fractured discs and bruising to the lower back.,1
An employee was working a grinder when the employee lost control of the equipment. The grinding wheel then struck and lacerated the employee's bicep.,1
"An employee was pushing stackable carts. One cart was off center and the top cart came down and locked into the bottom cart, pinching the employee's finger between the cart pins. The employee suffered a fingertip amputation.",0
An employee was walking in an aisleway when the employee tripped over a pallet laying on the floor. The employee suffered a fractured pelvis.,1
"An employee was mounting and dismounting a tire on a vehicle when his left thumb was pinched between the vehicle frame and the lift jack, causing a thumb laceration.",1
"An employee was cutting band iron on an ironworker machine. When he engaged the ironworker, the employee's fingers were smashed between the iron band and the base plate as the band was being cut by the ironworker. He suffered amputations of the right-hand middle, ring, and pinky fingertips below the nail.",0
"An employee was helping a forklift driver move a sole press machine when the machine tipped over and fell onto the employee. The employee was pinned between the machine and the floor, suffering broken ribs, a collapsed lung, and a cut to the left ear.",1
An employee fell 5 feet while climbing down from an excavator he had been working on. He suffered a broken left hip.,1
An employee was closing a valve when welding sparks ignited ethanol. The employee suffered second-degree burns to both arms.,1
An employee was moving a sub into a sub box when the sub structure crushed his right thumb.,1
An employee was unclogging a filler machine. Its blades amputated his left index and middle fingers at the knuckles.,1
An employee was getting ready to shut down an overwrap machine when it had a problem with one of the packages. The employee attempted to grab the package and the device that cuts off the wrap severed the tip of the employee's right middle finger.,0
"An employee was working on a roof, replacing metal sheets for exterior roofing. The employee fell through a roof opening into the first floor, suffering a broken leg, broken elbow, and broken jaw. The employee was hospitalized, requiring surgery.",1
"An employee was cutting a wooden board with a saw to make skids when the board kicked back and the sawblade hit his left thumb, resulting in a thumb amputation.",0
"An employee was using compressed air to blow a sponge through a concrete pipeline to clean the pipe. The employee was disengaging the fitting of the air hose reducer, which was still under pressure, when the reducer struck the employee just below the hard hat line. The employee suffered a concussion, brain bleed, and forehead laceration.",1
An employee was underneath a transport trailer greasing a brake when the trailer pulled forward and rolled over his legs. He suffered a broken leg and broken pelvis.,1
"An employee was pressure washing when the pressure washer nozzle came off and bounced back, striking the employee's forearm. The employee suffered a laceration to the right forearm and a possible impact injury to an artery.",1
An employee fell while closing a rolling entrance gate. Her left ring finger was caught between the pulley and the gate and the tip was amputated.,0
An employee was climbing down from a formwork wall when he fell approximately 10 feet to the ground and broke his right leg.,1
"On August 9, 2019, an employee was working at his forming station. The employee started to feel ill, went home and was then hospitalized with heat stroke and kidney failure.",1
"An employee had been preparing and moving pallets using a powered industrial truck. As the employee stepped off the truck, it crushed the employee's ankle and foot against a pallet, breaking the ankle and foot.",1
"Ventilation fans inside the restrooms of the employee cafeteria experienced a mechanical issue, causing smoke to occupy the restroom. An employee working in the cafeteria at the time of the mechanical issue experienced trouble breathing and had an asthma attack due to smoke inhalation, requiring hospitalization.",1
"An employee went to a medication room to retrieve medication for a patient when his right arm at the elbow was caught in the door while someone was pushing it. The employee suffered a hematoma of the right arm that became infected, requiring hospitalization.",1
"On August 9, 2019, an employee was tying ladders to the top of a work trailer when he fell off the side of the trailer and landed on the ground, breaking his heel bone. He was hospitalized.",1
"An employee was shopping during her lunch break when she slipped and fell to the floor, fracturing her hip.",1
An employee sustained a left middle fingertip amputation while cleaning a plastics grinder machine.,0
"An employee was working on a production line when the employee stepped back and tripped over the edge of a pallet that was sitting on the floor. The employee fell to the concrete floor and fractured the right hip, requiring hospitalization.",1
An employee was working near a concrete pump truck that had a hose and hose clamp connected to the exterior output connection of the truck. The truck was pumping concrete when the hose clamp broke off and struck the employee in the face. The employee suffered facial lacerations.,1
"A scissor lift, moving through a doorway, pinched an employee's left index finger against the doorjamb. The finger was amputated up to the knuckle.",1
"An employee turned into a walkway between portion sizers at a poultry processing facility, carrying four or five tote liners. The employee slid on a small piece of chicken and fell to the floor, suffering a broken left hip.",1
"An employee was placing boxes on a pallet. The employee's gloves were caught in a tape machine's sprocket, causing hand fractures.",1
"An employee was using a web sling to load a steel coil onto a hoist when the web sling failed, allowing the coil to fall to the ground and land on the employee's left foot, breaking it.",1
"An employee was run over by a dump truck while rolling up a hose, suffering severe skin abrasions to the legs.",1
An employee was stacking containers adjacent to a self-closing door. The door closed on the employee's pinky finger resulting in a fingertip amputation.,1
Employees were tasked with fixing an indoor rail car that is utilized for brick making activities. The injured employee went into an open storage area to retrieve corrugated aluminum to utilize for repair activities. The employee stepped on a piece of foam board and fell through the foam board approximately 10 feet into the room below.,1
An employee was filling a tanker with hot asphalt when the asphalt blew back and struck his face under his face shield. He suffered burns to his face and upper body.,1
"An employee was offloading a truck with process fluid. The employee came into contact with the fluid and suffered second-degree burns to the face, neck, and shoulder.",1
An employee was making a delivery when he tripped and fell.,1
An employee was driving a trailer to deliver liquefied petroleum gas to customers when the gas leaked and the employee was exposed to gas inhalation. The employee was hospitalized.,1
"An employee was coming down from a derrick digger truck boom's seat when he fell to the ground, suffering a head abrasion and fractures to both heels, his tailbone, his right ankle, and a toe on his right foot. He was hospitalized.",1
While cleaning a pump motor an employee's middle fingertip was amputated. The motor was running at the time.,1
"An employee was checking whether the safety pin on a piece of equipment was locked. The locking mechanism was engaged, and the employee's right little finger was pinched in the mechanism. The fingertip was amputated.",0
An employee was refilling a container of chemicals when the employee became dizzy and could not breathe due to exposure to chlorine gas.,1
"An employee was standing about two-thirds of the way up on a 12-foot portable ladder. He was using the claw of a hammer to partially loosen a screw that was embedded on a wooden board attached to the wall. When the screw came free, the employee lost his balance and fell off the ladder landing on his feet on the concrete floor. He sustained a left heel fracture and a right tibia/fibula fracture.",1
"An employee went to the break room to make herself a cup of tea when she tripped and fell to the floor, breaking her hip.",1
"An employee was offloading fish from a fishing tender vessel using a 12-inch suction hose. The hose had an air pocket that caused it to whip, striking the employee's hand against the coaming on a hatch. The employee sustained right-hand lacerations and a fracture.",1
"A tractor-trailer driver had opened the rear trailer doors and returned to the tractor cab to back the trailer to the dock door. An employee entered the space between the back of the trailer and the edge of the dock. The trailer backed up, trapping the employee between the back of the trailer and the loading dock. The employee suffered a fractured left wrist, fractured pelvic/hip bone, and fractured sacrum.",1
An employee bent down to gather tools and suffered a hernia. The employee had surgery and was hospitalized.,1
"An employee tripped and fell to the floor, suffering a broken hip. The employee was hospitalized.",1
"An employee was adjusting something on a rack when the rack above bent/failed, causing a large roll to fall onto and crush the employee's arm.",1
An employee was clearing starch from a drain when their right hand struck the rotating screw conveyor resulting in amputation of three fingertips.,0
"An employee was loosening a hose from a rail car when the hose splashed sulfuric acid on the employee, causing chemical burns to the shoulder.",1
An employee was processing cotton modules when a module injured his right foot.,1
"An employee was walking with a powered pallet jack in an aisle when he recognized that another employee on a pallet jack needed to go around him. He was moving his pallet jack toward the rack when his right foot was pinned between his pallet jack and the rack. The injured employee's right foot sustained damaged ligaments, a fractured bone and dislocated toes. The injured foot required surgery.",1
"An employee was dumping a trip hopper. The employee's left little finger was pinched between the forks of the forklift and the trip hopper, causing an amputation at the first joint.",0
"An employee was loading sand from a commercial vehicle into a locomotive. When the door of the sand tank was opened, the pressure caused it to strike the employee in the face, causing lacerations and a fracture to the left side of the face.",1
"On August 11, 2019, an employee slipped and fell into a puddle of hot syrup while walking across a production floor. The employee suffered burns to the hands and back.",1
"An employee was driving a stand-up forklift. While making a turn, the forklift struck a product being pulled by another forklift. The employee's leg was caught and broken between his forklift and the product.",1
"While leaving a ticket kiosk, an employee tripped over the leg of a crowd control barrier. The employee fell onto the asphalt and suffered a fracture to the head of the left femur.",1
"An employee was putting a box of produce on the shelf in the produce cooler. She was standing on the steel shelving wedge placed on the vertical base of the steel shelves to prevent damage when she slipped and her ring became caught on the steel shelving, resulting in a left ring finger degloving.",1
"On August 12, 2019, at 2:00 PM, an employee was carrying an electrical panel (86 inches long, 44 inches wide, 9 inches deep, and 72 pounds) with a co-worker. The electrical panel slipped out of his hands, causing a laceration to his right arm near the elbow. He was hospitalized.",1
"On August 12, 2019, an employee was setting up a printing press, pulling out the paper roll. The machine jogged while the employee's left index finger was inside it, amputating it at the first or second knuckle.",0
"An employee was removing fencing panels from the back of a truck. After pushing a panel off the top of the pile, the employee moved to get down off the truck, slipped, and fell between the fencing panels and the stands that held the fencing up. The employee suffered injuries to the back, left shoulder, and right arm.",1
"On August 12, 2019, an employee was taking measurements utilizing a tape measurer and cutting PVC pipe for about 15 minutes using a PVC ratchet cutter. The employee later felt unwell and was hospitalized for heat-related illness and acute kidney failure.",1
"An employee was using a floor cleaning machine. When he stepped off, the equipment moved and hit his left leg, fracturing it.",1
"An employee was pouring molten brass into a pig mold. Brass splashed into his boot, causing second-degree burns to the side of his right foot and third-degree burns to the top of the foot.",1
"As an employee was exiting a restroom (pushing forward on a hinged door that opens outward), another employee was pulling a pallet of products past the restroom door. The door hit the pallet and then bounced back and hit the employee in the head. The employee suffered a head injury.",1
"An employee was walking when his leg gave out, causing him to fall to the ground and injure his leg.",1
"An employee climbed up on a storage crate and then fell to the ground, breaking an ankle.",1
An employee was cutting metal brackets while wearing wet gloves and was shocked. The employee was hospitalized.,1
"An employee was tightening bolts on a resin tank. The employee was using a slugging hammer, which hit and crushed the employee's finger.",1
An employee was walking in front of a reach forklift to get product when the forklift fork struck and cut the employee's right heel.,1
An employee was loading industrial washers in the plant. The employee appeared unwell and was hospitalized for possible heat stress and/or heat stroke.,1
An employee was unloading an 18-wheeler trailer when a truck frame that was on the truck fell and caught his right pinky finger between the wall of the trailer and the truck frame. His right pinky finger was amputated to the first joint.,0
An employee tripped and fell sideways on a cylindrical tube sticking up from the same level. The employee was hospitalized with a puncture wound and two broken ribs.,1
"An employee was assembling a valve when the parts slid together, crushing his left index finger and resulting in a finger amputation.",0
"An employee was using a post hole digger to dig holes in order to build a fence. The employee inserted the post hole digger into the ground and hit a powerline, which created a flame that shot up and burned portions of the employee's left and right arms. The employee may have suffered a mild electric shock as well.",1
"While performing tasks inside and outside, an employee suffered heat-related illness.",1
"While working in the baggage area under a terminal, an employee was helping to guide a tractor in next to the baggage belt. As the tractor and first cart passed her and turned away from the baggage belt, the second container hit the back of the employee's right hand, which was on a bollard between the carts and the employee. The employee suffered a broken right hand.",1
"An employee was on a forklift platform, using the forklift to move vehicle hoods into a dumpster for recycling. A vehicle hood knocked him off the platform, causing him to fall about 5-6 feet to the ground. He suffered a broken collarbone and a laceration to the back of his head requiring stitches.",1
"An employee was driving a standup forklift down the main aisle to the break room for lunch. When the employee approached the area where the empty forklifts are staged, he turned the corner and hit a parked forklift. His foot was pinned between the two lifts. He sustained a fractured ankle and was hospitalized.",1
"An employee was driving a shag truck outside of a warehouse when he drove into a concrete post  in the dock area. He was thrown forward, striking his right leg on the truck's dash. He was hospitalized with a fractured right lower leg.",1
"An employee was carrying a pneumatic ventilation blower and slipped when stepping off one barge to another barge. The employee fell to the deck of the barge and the blower fell on his right thumb, crushing it and resulting in a partial amputation.",1
"An employee was unloading scaffold sections from a flatbed truck when he fell from the truck to the ground and hit his head, suffering internal bleeding and head trauma.",1
An employee was using a 14-foot aluminum extension ladder to go from the second to the first floor when the employee fell to the concrete floor and suffered skull fractures.,1
An employee was doing the wood framing around a window when he suffered a nail gun puncture wound to the chest cavity. He was hospitalized.,1
"On August 12, 2019, at approximately 9:15 AM, an employee was troubleshooting the press stacker when the employee's right hand entered the stacker and activated the lift plate. The plate came down on the employee's right-hand fingers, resulting in a partial amputation to his middle and ring fingers.",0
"An employee was helping a resident when she slipped and fell on a recently mopped floor, injuring her right knee and left thumb.",1
"An employee was pressure washing a roll-off box when the employee contacted the pressurized water, suffering a left foot injury.",1
An employee was laying pipe in a trench under hot conditions. The employee began to look ill and lost consciousness. He was hospitalized for heat-related illness.,1
"An employee was attempting to remove a drive gear from beneath equipment. The employee was operating a pneumatic drill with his left hand while bracing himself with his right hand on the drive gear. The torque of the drill caused the gear to shift and catch the distal phalange of his right pinky finger, resulting in a partial amputation.",1
"A large spool of electrical wire fell on an employee, injuring his hand.",1
"An employee was blocking a ham that was being cut with a band saw when the ham turned sideways. His hand then came into contact with the sawblade, resulting in an amputation of the pad of his right thumb.",1
"An employee was removing paint in a stairwell where the floor had been removed and fell through a hole in the floor, suffering broken bones.",1
An employee was walking by a rack when she tripped on a handrail that was in the rack and fell to the floor. She suffered a broken left femur.,1
"An employee was loading a boom attachment onto the tines of a forklift. Noticing that the chain was wrapped around the clamp, the employee attempted to unwrap it. When the chain released, the employees right index finger was caught in the slack of the chain; a bone was broken and the tip was amputated.",1
"An employee tripped and fell while working in an overhead storage area, suffering broken vertebrae.",1
An employee was unloading 50 percent sodium hydroxide from a tanker truck when he became hot and sat down to cool off and drink water. He was hospitalized for possible heat exhaustion.,1
"An employee was performing garbage collection duties (riding on the outside of a trash collection vehicle, collecting garbage from the curb, and putting it into the collection vehicle) when he began to feel flushed and nauseated and stopped sweating. He was hospitalized for dehydration.",1
An employee drove to a site to shoot wells with a non-radioactive source when the employee became dehydrated and experienced a heat injury.,1
An employee was removing a tundish with a remote overhead crane when the tundish fell off the crane and struck another employee against a second tundish on the floor. The injured employee suffered a broken pelvis.,1
"An employee was operating a table saw when the employee's left thumb contacted the saw blade, resulting in a left thumb tip amputation.",0
"An employee slipped while climbing onto a baker's scaffold and fell to the ground, fracturing ribs and the clavicle. The employee was hospitalized.",1
An employee was removing a student from oncoming traffic when she broke her left ankle on a cement curb.,1
"An employee had just finished strapping a tractor into a truck bed. As the employee came down from the truck, he fell onto the ground, landing on his back. He suffered a broken back and was hospitalized.",1
"An employee was walking in a parking lot when she fell, landing on the ground on her right knee. Her kneecap was broken and she was hospitalized.",1
An employee was doing extermination work at a private residence when a bee stung his hand. He went into anaphylaxis and was hospitalized.,1
"At 1:00 PM on August 13, 2019, an employee was working on a storm drainage pipe-laying project when the employee experienced cramps and nausea, requiring hospitalization for heat illness-related dehydration.",1
An employee fell from a truck and sustained back pain.,1
"A Hirsh Industries employee was unloading drawer wraps from a roll form. While removing one drawer wrap, a second drawer wrap was released by the roll form and collided with the one being removed by the employee. This caused the employee's finger to be pinched between the first drawer wrap and a closed gate. The employee's right pinky fingertip was amputated between the fingernail and first knuckle.",0
"An employee was pre-mixing 18 pounds of xanthan gum with 15 gallons of isopropanol alcohol. Sparks from a drill ignited isopropanol fumes in the kettle and created a flash fire, which burned the employee's hand and nose.",1
"On August 12, 2019, an employee was installing HVAC ductwork in a residential attic. The employee felt ill and was hospitalized, suffering from a kidney infection and dehydration.",1
An employee was repairing a farm tractor while underneath it. The tractor started and ran over the employee causing a fractured pelvis.,1
"An employee lost consciousness while using a wood chipper on tree limbs. The employee was hospitalized, suffering from heat exhaustion.",1
An employee was assisting with water well drilling operations when he began to feel ill and had cramping due to dehydration/heat stress.,1
An employee was unjamming a grinder when his left index fingertip was caught and amputated between the blades and the housing. The machine was not locked out at the time.,0
"An employee stood up at their desk to plug a phone into their computer. When the employee went to sit back down, they missed the chair and fell, hitting their head. The employee required hospitalization for a post-concussive head injury.",1
"A driver backed a truck up to a loading dock door and then went into the building to unload the truck. When he mistakenly opened the doors to a truck in an adjacent bay, that truck started to pull away. The driver then jumped from the dock and landed on the ground below. He sustained a fracture to the left leg below the knee that required hospitalization and surgery.",1
"An employee was climbing down a 6-foot A-frame ladder. He slipped on the second step from the bottom, fell, and suffered a back injury.",1
"A hose, pressurized at 9,000 psi, ruptured while being tested. An employee's left tibia was injured.",1
"An employee was on a ladder while repairing a shutter on the second story of an apartment building. The ladder gave way and the employee fell straight down to the ground, landing on his feet and suffering a broken back and a fractured foot/ankle.",1
An employee was operating a roll-off truck when he began to feel a tingling in his arm and became short of breath. He was hospitalized for heat stress/exhaustion.,1
An employee was clearing a material bridge. A cutter head pinched the employee's foot and partially amputated the little toe.,0
An employee suffered heat exhaustion and lost consciousness while making deliveries.,1
An employee working on the de-bone line was cleaning out her work area when her right hand got caught in a small space between the guard and the shaft of the conveyor belt. She sustained a right thumb abrasion and fractured right index finger.,1
"An employee was doing a security patrol when a vehicle struck him, injuring his lower body.",1
An employee was riding on the rear driver side step of a rear load trash truck. The truck was reversing onto a no-outlet street when it backed into a roll-off container on the side of the street. The employee was crushed between the truck and the container.,1
"While doing housekeeping in the early morning, an employee tripped on an HDPE pipe and fell, breaking his ankle.",1
An employee was removing an 800-pound inner wheel and tire from a tractor. The wheel slid down the tapered axle shaft and fell on top of the employee resulting in a broken pelvis.,1
"An employee was opening a pneumatic hatch on top of a truck trailer. The employee fell from the trailer to the ground about 13 feet below and suffered a fractured rib, shoulder, and little finger, as well as a punctured lung and a dislocated collarbone.",1
"On August 13, 2019, a yard truck operator was hospitalized for possible dehydration.",1
"An employee was framing an outdoor kitchen. He was on the third step of an A-frame ladder when he and the ladder fell. His head hit the concrete floor, causing skull fractures. He was hospitalized.",1
"At around 9:30 a.m., an employee lost consciousness at a work site due to dehydration.",1
"An employee was on a 6-foot ladder, changing out a bubble wrap roll. The employee fell from the ladder to the ground, suffering a broken right ankle/leg.",1
An employee was on a roof trimming tree branches when he backed up and stepped through a skylight. He fell 20 feet to the garage floor and sustained fractured ribs and a punctured lung.,1
An employee was lifting an ATV that was stuck when she suffered a bulged disc in her lower back.,1
An employee was attaching a chain between a payloader and a truck. The payloader tightened the chain and the employee's left index fingertip was caught in the chain and amputated.,1
"An employee in a bucket truck was removing the cover off of a center phase 35.5-kV top circuit and was hit by an arc flash. The employee sustained third degree burns to the neck and the left side of a hand. The employee also sustained first and second degree burns to the face, right shoulder and arm, and around the back from rib to rib.",1
"An employee was going to turn the power off of an air conditioning unit located in the receiving area of the warehouse. The employee got into a bucket that was on top of a wooden pallet on the high-lift. The high-lift was extended about 25 feet into the air. As the employee reached towards the air conditioning unit, he stepped to the left side (front) of the bucket and the bucket slid off the high-lift. The employee fell to the concrete floor, landed on his left side (back), and hit his head on the floor. He suffered a laceration to the back of his head and severe back pain.",1
An employee fell on a public sidewalk on campus and broke an arm.,1
"An employee was climbing down from the bottom rung of a portable ladder that was leaned against a segment of a caster on a transport car. While dismounting the ladder, the employee lost balance and fell approximately 3' 2"" to the floor below. The employee was hospitalized with two fractured vertebrae in the back and required surgery.",1
"While working in the field, installing pipes, an employee began cramping and suffered a heat-related injury.",1
"The injured employee was training another employee on a robot that is used to weld steel battery boxes. While removing a box from the tray fixture, the tray got stuck, bounced, and the upper fixture fell down, amputating the injured employee's right pinky fingertip.",0
An employee experienced a heat related illness after handling filing cabinets on an overhead conveyor of the paint line. The employee was hospitalized.,1
An employee was operating an electric pallet jack behind a floor scrubber when the scrubber stopped and the employee collided with the scrubber's back bumper bar. The employee sustained a fibular fracture to the lower left leg and was hospitalized.,1
"On August 13, 2019, an employee was doing roofing work when he began cramping and vomiting. Later that night, he was hospitalized for heat stress.",1
An employee was on top of a plastic injection molding machine when their hand became caught in the running machine. The employee sustained the amputation of three fingers on the left hand.,0
"An employee was riding on the driver's side rear riding step of the trash collection truck. The employee dismounted the step before the truck had fully stopped and fell to the pavement, resulting in a fractured right hip requiring hospitalization.",1
"An employee was hooking up a tractor trailer when he slipped off the side of it and fell to the ground, suffering a hip injury.",1
"An employee was turning a unit and brushing welded flanges. The employee's left foot was caught between the lifting table and the surface of the unit, resulting in an amputation to the big toe and the second toe.",0
An employee slipped and fell while walking down a hillside. The tree gaff he was carrying punctured his lower back.,1
"An employee was tearing down a trench box (which was on the ground, not in use). When the last pin holding two panels together was pulled out, one of the panels struck the employee and injured his leg/hip.",1
"While installing a catch pan at the base of a bandsaw, an employee was shocked by a power cord.",1
An employee was clearing a clog in a brine pump. The pump blade amputated the employee's fingertip.,0
An employee was hooking up a trailer to a vehicle. The hitch slipped and the employee's right index finger was caught between the hitch and the trailer. The tip was amputated to the first knuckle.,0
"An employee had ascended approximately 21 feet up a grain elevator to close a hatch located at the eave of the bin. While descending, the employee fell to the ground and sustained multiple fractures and a concussion.",1
"On August 14, 2019, a temporary employee was cleaning out a grain bin with a vacuum system. The employee was engulfed in the grain (which was about 5 feet deep) up to about chest height. He was hospitalized, suffering from breathing issues.",1
"An employee began to feel cramping during a work break, then felt ill and was hospitalized, suffering from acute kidney failure and heat-related muscle injury.",1
"At 2:00 p.m. on August 14, 2019, after driving a pickup truck in the morning, an employee began to suffer cramping and lightheadedness. He was hospitalized, suffering from possible heat stress.",1
"An employee was bent over in a parking lot, checking fuel delivery spill buckets. The employee was struck by a customer's SUV, suffering leg, hip, and wrist injuries.",1
"An employee was in the locker room preparing to leave for their shift. The employee felt stomach pain, began vomiting, and was hospitalized, suffering from heat stress.",1
"An employee fell from a truss that was being installed, landing on the ground 13 feet below and suffering broken bones and head trauma.",1
"At 3:10 p.m. on August 14, 2019, an employee was clamping parts into a fixture to prepare them for spot-welding. The spot-welding machine activated while his hand was in the point of operation and the electrode amputated his right index fingertip.",1
"Three employees were repairing forks on a forklift. While they lifted the forks together, one employee suffered a back injury.",1
"An employee was working near the slat conveyor. When he attempted to retrieve his drink bottle,  his right pinky finger was pinched in the conveyor. As a result, his right pinky fingertip was amputated. The slat conveyor was guarded at the time of the incident.",0
"Two employees were rigging up a conveyor to slide it out and lift it up with a forklift; one employee was on the far side of the conveyor and the other was operating the forklift. The tines on the forklift hit the first employee's lower left leg, breaking it.",1
"An employee was wiping down a pastry press with a paper towel. The press pinched the employee's finger, causing the amputation of the fingertip.",1
"An employee was preparing to leave a roof when he slipped and fell to the porch below, striking his head; he then fell over the porch to the ground, where he struck his head again.",1
An employee fell on the bathroom floor and suffered a hip injury.,1
An employee was stocking shelves when the shelving amputated her left ring finger.,1
"An employee was cutting meat with a bandsaw. The saw cut his left middle finger. He was hospitalized, requiring surgery to amputate the fingertip.",1
An employee was forming pieces of material at a press brake. Two fingers on his right hand were crushed between the material and the punch of the brake.,1
"An employee was working on a roof, removing damaged panels. An electrical shock burned the employee's right hand and right foot.",1
"A mechanic was troubleshooting equipment when his finger was caught in a machine roller, resulting in a partial amputation.",0
"A temporary employee was on a 10-foot ladder, installing insulation and doing mastic duct work. The employee came into contact with an exposed temporary wire, was shocked, and fell off the third or fourth rung of the ladder. Along with the electric shock, he suffered a broken left heel.",1
"An employee was climbing down a ladder after putting material away on shelves. She fell to the ground, hitting her hand and head and twisting her ankle and leg. She was hospitalized with a broken femur.",1
"An employee was changing a condensate filter. A fire erupted, burning the employee's arms, legs, neck, and face.",1
"On August 14, 2019, an employee was walking into a trailer to add dunnage onto the freight when a forklift struck him while backing up. He suffered a bruised left ankle and broken right hip and was hospitalized.",1
"While driving, an employee began to feel dizzy and unwell. The employee suffered from heat stroke.",1
"An employee was hydroblasting the tubes in a spare condenser with a lance. As he moved the lance from one tube to the next, the lance engaged, jumped back, and lacerated the employee's right hand.",1
An employee was operating a table saw to cut lumber for doors being manufactured. The saw amputated his right index and ring fingertips.,1
"An employee fell while stepping over a roof parapet wall, falling to the ground and suffering compressed vertebrae.",1
An employee was running a drilling unit in a field. The drill hit an underground power line. He lost consciousness and was hospitalized.,1
"After working the day shift cleaning and repairing a compressor at an oilfield site, an employee began to exhibit signs of illness. The employee was hospitalized with a possible heat-related illness.",1
"At about 9:15 a.m. on August 15, 2019, three employees were removing a spindle used to feed steel coils into manufacturing equipment. The spindle was being lowered to the floor using straps and a bridge crane. When the spindle came to rest on the floor, the load shifted and the tension bar struck one of the employees on the lower legs, knocking him to the concrete floor. He suffered a broken right hip and a broken left ankle and was hospitalized.",1
"An employee climbed up an electric wind tower nacelle to perform maintenance activities when he became ill, experiencing dizziness and fatigue. He was hospitalized with possible heat exhaustion.",1
"While working on a wind turbine, an employee suffered heat exhaustion. The employee was hospitalized.",1
"At 1:45 p.m. on August 15, 2019, an employee was working in a paint booth, preparing a jacked-up car for painting. The car rolled backwards and hit the employee. The employee was hospitalized.",1
"An employee sandblasting a pipeline. The sandblasting medium was not blowing well, so he approached the compressor; when the hose was disconnected, the machine sandblasted his left hand. He was hospitalized.",1
"An employee was turning a ball valve on the bypass relief for a filter. The employee was cycling out dirty oil and adding fresh oil. The sanitary fitting on the top of the valve came loose, allowing oil to exit the pipe and burn both of the employee's legs.",1
"An employee fell through a skylight on a roof, suffering internal injuries.",1
"An employee was cleaning an aspirator. He was caught by the rotating 12-inch screw auger at the bottom of the equipment, which severely lacerated his left leg. The leg was medically amputated just below the knee.",1
"As a pipe-laying job site was being closed up, an employee was struck by lightning. The employee was hospitalized.",1
"A temporary employee (of Savvy Staffing) was standing in front of a valve when it was opened. Scalding water was discharged onto the employee, causing severe burns to 40 percent of the employee's body including the lower abdomen, pelvis, thighs, arms, and hands. The employee was hospitalized.",1
"On Thursday, August 15, an employee was walking from the cafeteria to her office when she tripped, slipped, or fell to the floor.  She broke her right humerus and was hospitalized, requiring surgery.",1
"An employee was shoveling dirt. The shovel hit an aerosol can and a piece of metal struck the employee's left forearm, cutting the main artery.",1
"On August 15, 2019, an employee was lowering a dump trailer onto the ball hitch on a truck. His left middle finger was pinched between the ball and the trailer hitch, causing a partial amputation.",1
"An employee was replacing a drive belt on a locked-out conveyor. The pulley was turned from the other side, and his thumb was caught between the pulley and the belt. He suffered a soft-tissue amputation (losing the skin and the nail) from his left thumb just below the thumbnail.",0
"An employee was working from a bucket truck, moving 7.2-kilovolt lines 40 feet up on a power pole. A live wire touched the employee's right hand or head; the employee was hospitalized and the hand was amputated.",1
An employee was using a powered round knife when it cut off the tip of his finger.,0
"An employee was installing sheet metal panels. The employee's hand got caught between a panel and the metal structural frame, which pinched the tip of his right middle finger off.",1
An employee was blowing down acetylene bottles. The acetylene ignited and the employee's arms and legs were burned.,1
"An employee was walking across a parking lot when she tripped on some sidewalk repair material, fell, and struck her knee on the curb. She suffered a broken bone in her right leg.",1
An employee was climbing an A-frame ladder when it slipped and the employee fell. The employee suffered a broken back.,1
"An employee was on a wet metal roof, preparing to install wall panels. The employee fell, landing on the ground 18 feet below and suffering multiple contusions and fractures. The employee was hospitalized.",1
An employee sustained possible heat stroke while working on an injection molding line.,1
"An employee tripped while exiting a room and fell to the floor, suffering a broken right lower forearm.",1
"As a light was being installed, a neutral wire that was being backfed touched an employee, who suffered minor electrical burns to his index finger and thumb.",1
An employee was struck by a pallet jack while picking orders. The employee suffered a broken tibia and fibula and was hospitalized.,1
"An employee was removing an air bubble in the plastic film on a winding machine. His right hand fingers were pinched between two rotating rollers, resulting in amputation of the middle and ring fingertips.",0
"An employee was standing on the rear tire of a multi-axle trailer, preparing it for transport. He fell onto the tire and then to the ground, suffering broken right-side ribs and a broken right foot.",1
"An employee was moving/lifting a running push mower when the mower was set down on the top of his left foot. The mower blade lacerated his left foot, resulting in the partial amputation of two toes.",1
An employee was helping offload a guardrail from a trailer. A damaged piece of guardrail struck the employee in the abdomen.,1
"An employee tripped over a wardrobe Z-rack and fell to the floor, breaking her right hip.",1
"A crew was setting up to fix storm damage when an employee was shocked, suffering small burns on his index finger and right thumb.",1
An employee was removing electrical wiring. A short circuit caused second- and third-degree burns to his arm and side.,1
An employee was standing in the bucket of construction equipment to work on an electrical reel that was mounted above when the employee fell approximately 10 feet to the concrete floor below. The employee sustained a fractured collarbone and multiple skull fractures.,1
"An employee was changing a battery in an electric pallet jack. His finger was caught between the pallet jack's frame and the battery, causing a fingertip amputation without bone loss.",0
"An employee was working from a ladder when he fell off, landing on the ground 7 or 8 feet below. He suffered a head injury requiring sutures and a concussion and was hospitalized.",1
"While trimming a tree limb using a chainsaw, an employee's lower right leg was cut by the chainsaw. He was hospitalized.",1
An employee was beginning to descend a three-step stairway when he lost balance and suffered a partially torn quadriceps tendon.,1
An employee fell from the second floor while removing metal framing. He broke his ankle and another bone in his leg.,1
"An employee was working near a parking deck when a roll of cables fell from the deck, striking him and injuring his head.",1
"An employee was working on a conveyor line, waiting for part of a bus frame to reach his area. When the conveyor line started, it caught his glove and pulled his left middle finger into the sprocket, which amputated his left middle fingertip.",1
"An employee was operating a broom truck on the shoulder of a highway that was being repaired. A dump truck struck the employee's broom truck. The employee suffered a broken arm, a dislocated elbow, a broken leg, a fractured pelvis, multiple broken ribs, a punctured lung, fractured vertebrae, and decompression.",1
An employee fell on the stairs while delivering furniture.,1
"An employee was on a 10-foot A-frame ladder, cutting steel brackets that held a wooden dock to a cement pier. One of the brackets hit the ladder and the employee fell, suffering a broken wrist.",1
An employee was trying to catch product coming off a conveyor when his fingers were caught between the conveyor and a metal bar under it. His left index finger was amputated.,0
"An employee was cutting sheets of cotton batting with a lightweight round knife. The knife cut his left middle finger, causing the amputation of flesh from the fingertip.",0
"After work (installing wellheads and valves in the field), an employee suffered severe heat exhaustion and cramping and was hospitalized.",1
"On August 16, 2019, a maintenance field technician was on top of an elevator at the third floor level. The elevator began to move up and he had to jump through the doors to the third floor. He suffered a broken shoulder and broken ribs.",1
"An employee was leaving a truck at the end of his shift. As he climbed down the stairs built into the tailgate, he slipped, hit his forehead on the truck (suffering a forehead laceration that required stitches), and then fell backwards to the ground, breaking his left wrist.",1
An employee fell from a ladder and suffered facial injuries.,1
"A packing associate was cleaning under a packing bin and as he stood back up he grabbed the discharge chute. The discharge chute came down, pinching his finger at the hinge point, causing a partial amputation of his right thumb tip.",0
"An employee tripped and fell to the floor while walking into the building, injuring her left elbow.",1
"An employee's fingers entered a running machine and came in contact with the cutting blade inside, resulting in amputations of parts of the fingers.",0
"At 6:15 p.m. on August 16, 2019, an employee was performing a change-over from one product to the next in a mill area. While the employee was installing one of the conveyors, an open metal cover closed, hitting his left hand and breaking his index and middle fingers.",1
An employee was transferring a stabilizer from a forklift to a catwalk. One end of the stabilizer slid off the catwalk and fell onto the employee's lower left leg. The employee's tibia and fibula were broken.,1
"At about 6:45 a.m. on August 16, 2019, a temporary employee was using an electric powered industrial vehicle to pick cases in a warehouse. The employee's left foot was pinned and crushed between the vehicle and a racking support. The employee was hospitalized, undergoing surgery.",1
"An employee was driving a powered industrial truck. His hand was crushed between the truck and a rack, and he was hospitalized.",1
"An employee slipped on the floor, fell, and broke her right patella.",1
An employee was unloading steel beams from a flatbed truck. A beam fell off the truck and broke the employee's leg.,1
"An employee was about to begin grooming a dog when it bit her left thumb. She was hospitalized, requiring surgery.",1
An employee was cutting ice with a bandsaw. The saw amputated two of the employee's fingertips.,1
"At about 9:40 a.m. on August 16, 2019, a temporary employee was loading a spool of shrink-wrap on a shrink-wrap machine using an electric powered hoist. The hoist dropped the load onto the employee's finger while adjusting a roller tab that had to be in the vertical position for the roll to set in place. The employee suffered the amputation of the left middle fingertip.",0
"On August 16, 2019, an employee was climbing a scaffold ladder carrying a wire spool. He fell to the ground about 15 feet below, injuring a vertebra in his lower back.",1
"An employee tripped and fell to the floor while carrying drywall material, suffering abrasions to the nose and possible neck fractures.",1
"After erecting and connecting a base to a mid tower section, employees were preparing to lower tools. An employee fell through a hatch (open so that tools could be lowered) to the concrete 60 feet below and suffered fractured ribs, a fracture to the T-12 vertebrae, a knee injury, and laceration to the back of the head.",1
"An employee was sitting on a truck, lowering a camera into a manhole. A front end loader struck him, causing amputations to his right big and second toes.",0
"An employee was on the rack of a bucket truck, preparing to enter the bucket, when he fell to the ground and suffered a head injury.",1
"On August 16, 2019, an employee was cutting a telephone pole with a chainsaw. The saw kicked back and struck his right leg, causing a severe laceration, a chipped bone, and cut tendons. He was hospitalized and underwent surgery.",1
An employee raised the door to a breading machine and the machine caused an amputation to the employee's right index finger.,0
"An employee was struck by a tractor, suffering a broken pelvis.",1
"An employee was removing the catwalk on a tank battery. The catwalk tilted down and the employee's fall protection came off; the employee fell about 20 feet, suffering knee injuries and a head injury requiring a stitch.",1
"An employee was forming a part on a press brake. His left middle finger was pinched between the part being formed and the face/ram of the press brake, causing a partial amputation of the fingertip.",0
"A driver for LeSaint was on a dock. He and another employee fought and the other employee cut his abdomen with a box cutter, causing a laceration and a collapsed lung. He was hospitalized, requiring surgery.",1
"An employee was operating a conveyor system for concrete work. The conveyor system dislodged and pinned the employee to the ground, causing a thoracic compression fracture of the spine.",1
An employee was shot by a customer after an altercation began at the drive-thru menu board. The employee was hospitalized for the gunshot wound which resulted in a fractured left femur.,1
An employee was using heat from a blow torch to help loosen a bolt from a vessel's engine when an explosion occurred. The employee suffered first and second degree burns to both arms and both knees.,1
"An employee had been realigning a conveyor chain at an unscrambler. The employee went back to grab a board off the conveyor the machine started. The employee's arm was pinched between the chain and the unscrambler wall; the employee suffered fractures to the left ulna, radius, and hand, as well as a laceration between the left thumb and forefinger.",1
"On August 17, 2019, a mail carrier was at the last stop of his route when he became nauseated and began vomiting. He was hospitalized for heat-related illness.",1
An employee was inflating the brake airbags on a lowboy trailer. The airbags blew and knocked the trailer off the jack or jack stands. The employee suffered broken ribs.,1
"A telehandler operator was lifting a finishing machine to the third floor to be used to finish the concrete floor. The operator was trying to get the finisher over the safety cables and went to push the safety cable down. As the operator was pushing the safety cable down, one of the uprights holding up the safety cable detached from the angle iron causing the operator to fall approximately 30 feet. The employee suffered a fractured pelvis and liver damage.",1
An employee's hand was caught between two pipes while he was aligning them. He suffered a partial amputation to the right index finger.,0
An employee was checking the tension on a motor's belt. The belt pulled him in and his finger went across the spindle. His middle fingertip was amputated above the first knuckle and his index fingernail was removed.,0
"An employee's little and ring fingers came into contact with fan blades, which caused an amputation to the little finger and a fracture to the ring finger.",1
"An employee was driving a customer vehicle. The vehicle's hood popped up and smashed the windshield, sending glass into the employee's eye. The employee's eye was scratched.",1
An employee was cleaning the laminator machine. Their left hand was caught in the conveyor belt and fractured.,1
"An employee was driving a three-wheel maintenance buggy. The buggy rolled over in a turn, and the employee's left lower leg was smashed between it and the ground.",1
"An employee of Aries Wells Service was visually and physically inspecting a tubing line. He glove got stuck on the line and his right index finger was pulled into the drum, which pinched it, removing skin. He was hospitalized and the finger was medically amputated.",0
An employee was adjusting a screen print machine. A rotating cam in the machine caught and amputated the tip of his right ring finger.,1
"An employee was exiting a forklift. The employee's foot was caught between the forks and they tripped, breaking their ankle.",1
"An employee was cleaning out a tortilla machine. The pneumatic attachment to the masa pump had been removed to prepare for cleaning, and the rotor inside the pump amputated her right middle finger at the first knuckle.",0
"A meter technician was replacing a CT meter loop that had been damaged during a storm; he had been working outdoors most of the day. He became ill, with blurred vision and disorientation. He was hospitalized for dehydration and/or heart-related issues.",1
"An employee was working on the kitchen in front of a steam table. While lifting a tray, his hand slipped into the steam table water, burning his right hand. He was hospitalized and required surgery.",1
An employee was moving a transformer on a dolly. The transformer slipped off the dolly and crushed the employee's left middle finger.,1
An employee fell while getting up from her chair. She landed on the floor and broke her leg.,1
An employee was conducting a screen change on equipment when the employee's left middle finger was punctured through the work gloves by the equipment.,1
"At 7:30 a.m. on 8/18/19, a maintenance employee was removing bolts from the bearing housing of a mixer using a break-over bar with a socket. He was standing inside the mixer panel on a flat surface with the break-over bar at chest height lifting upwards when he felt a sharp pain in his back and his knees became weak. He then laid down on his back. He suffered a compression fracture on his L7 vertebra.",1
"On August 18, 2019, an employee was standing on an exterior top plate setting trusses when the employee fell approximately 16.5 feet off the top plate and onto a saw horse and the ground. The employee suffered a fractured leg and jaw. Fall protection was not worn at the time of the incident.",1
An employee was attempting to turn on a light switch in resident's bathroom when she received an electrical shock to her right hand and was hospitalized.,1
"An employee was at an oil rig. The line he was tied off to was cut, and its weight pulled him down to the rig floor about 12 feet below. He suffered a spleen injury.",1
"An employee was cleaning a restroom. He discovered water spots on the floor in one of the stalls and placed a caution sign on the floor. As he was about to get a mop, he tripped over the sign and fell to the floor, suffering facial contusions and neck strain. He was hospitalized, undergoing spine surgery.",1
"An employee was walking, delivering mail, when he suffered a hip injury and fell to the ground. He was hospitalized, undergoing surgery for a broken hip.",1
"An employee was at a register checking out customers. The employee scanned toilet paper and proceeded to grab the hand-held scanner. The employee was walking around the bag carousel to the customer's cart when the employee's foot was caught on the corner of the fixed carousel. The employee tripped, lost balance, and fell to the ground, suffering a lower body fracture and muscle tears.",1
"On August 19, 2019, an employee was walking a horse when it reared and kicked the employee. The employee suffered broken ribs and a lacerated liver and was hospitalized.",1
"An employee was painting while standing on the second rung of a ladder. He leaned over to move a pole that was holding up a plastic barrier and lost his balance, falling to the floor and fracturing his right hip.",1
An employee was cutting sheet metal when the metal separated and hit the employee in the eye. The employee was hospitalized and required surgery.,1
"An employee was opening a hangar door when it slammed shut onto his left middle finger, resulting in a partial fingertip amputation.",1
"On August 19, 2019, an aircraft mechanic was working on the wing of an aircraft, slipped and fell 5 to 6 feet onto the concrete. He suffered a fractured left hip.",1
"An employee was operating a numeric bender to bend tubing when the employee's left hand entered the point of operation, resulting in the dislocation/fracture of the left index finger.",1
An employee was working an overtime postal route when a second employee found the employee with symptoms of heat stress. The first employee was hospitalized.,1
An employee was lifting an aircraft component with an overhead hoist. The component being hoisted created a shear point between itself and the test stand. The employee's thumb tip was amputated in the shear point.,0
"An employee was setting a pier column and needed to cut a piece of rebar with a gas-powered saw. When the employee started the saw to cut the rebar, it exploded and his pant leg caught on fire, burning the back of his left leg.",1
"An employee was operating a press and proceeded to clean the press. When he removed the bar from the press, the machine activated and pulled his hand into the tooling, cutting his left index finger and resulting in an amputation.",1
"An employee was helping a customer with a propane tank when he inhaled propane, suffering respiratory irritation.",1
"An employee was using a band saw to cut gating off of a part when the employee contacted the saw blade, resulting in an amputation to the right middle fingertip.",0
"An employee was helping a client when the client slipped and fell onto the employee. As a result, the employee suffered a broken hip and leg.",1
"An employee was delivering mail in a postal vehicle when the employee was struck by another vehicle at an intersection, suffering a leg fracture and open wounds to the leg.",1
"An employee was operating a telehandler forklift while wearing his personal fall protection harness. When he went to back up, a lanyard that was hanging down and not attached to the harness caught under the front wheel and jerked him violently in his seat. He was wearing his seat belt at the time. He struck the metal guards on the side seat of the forklift and fractured vertebrae in his back.",1
An employee was hanging up concrete chutes when the employee's left index fingertip was amputated by the chutes.,0
An employee was feeding sheets of steel into a masking machine when the employee's left hand was caught and lacerated between two moving rollers.,1
"After delivering mail, an employee stopped sweating and became dizzy. He was hospitalized with a heat illness.",1
"An employee was attempting to use a portable concrete mixer along with two other employees when the lid of the cement mixer came off and hit the top of the employee's forehead, causing a laceration just behind the hairline.",1
An employee was using his foot to push down material that was stuck in the automatic baler's loading hopper. His foot went through the cardboard into a void area causing the him to lose his balance and fall into the loading hopper then into the compactor ram area. The ram cycled and his feet were caught between the ram and a side of the compactor area. The employee suffered a broken tibia and the right foot was crushed. The employee's right leg was later amputated below the knee.,1
"On August 19, 2019, an employee was opening the pellet warming machine to prepare serving plates for the residents' dinner.  When the employee grabbed the handle on the lid, the employee received an electric shock and collapsed to the floor.",1
"An employee was working on a case packer when a piston was activated, creating a pinch point that amputated the employee's right pinky finger.",1
"An employee was climbing up a ladder when, at approximately 6 feet, the ladder slid sideways. The employee fell to the side, landed on his feet, and then fell backwards onto his back, fracturing vertebrae.",1
"An employee lost balance while on a ladder connecting steel and fell approximately 14 feet to the floor, suffering a compound fracture to the right leg.",1
An employee installed a new incline belt and was doing a test run when the incline belt would not start up. The employee was attempting to help the belt move when the belt amputated the employee's left thumb tip.,0
"On August 19, 2019, an employee was slicing chicken on a meat slicer in automatic mode. He was trying to move the fence carriage closer to the meat to better hold it in place when the machine pushed his left thumb tip into the blade. As a result, he sustained an amputation to his left thumb tip.",0
An employee was reaching out for a crane remote control when it slipped off his hand and activated the crane. The crane moved and his fingers were crushed between two pieces of metal.,1
"An employee was operating a slab saw when her hand was caught in the blade, causing severe hand damage.",1
"On August 19, 2019, an employee was working on a baker's scaffold while mudding drywall inside a commercial building. At approximately 11:20 a.m., the employee was standing on the scaffold and using his arms to move the scaffold across the floor when he lost balance and fell over the guardrails, landing on the concrete floor below. He fractured seven ribs and his skull.",1
An employee was lancing an underflow pump when he pulled on the whip and it came out of the pump. The high-pressure water jet then injured the employee's right forearm.,1
An employee was guiding a student who was backing a trailer into a parking spot when the employee was pinned between the trailer and a parked trailer. He was hospitalized with kidney/liver contusions.,1
An employee was cleaning debris around a core machine. The employee kneeled down and placed their left hand on a support bar. The machine cycled and the employee's left middle finger was amputated to the first knuckle.,0
"An employee was driving a forklift by a column when his foot was caught between the forklift and the building column, causing a foot injury that resulted in the amputation of three toes.",1
An employee was pushing cartons along a conveyor when his hand was caught between the roller and belt. He pulled his hand and suffered severe abrasions.,1
"Three employees were a replacing an extruder header. The first employee went to acquire rigging equipment and prepare a hoist. The second employee detached the extruder supply/return lines and began loosening the side clamps. The third employee was preparing the header for removal by removing the eight mounting bolts. Upon removal of the eighth bolt, the header fell approximately 6 feet from its cradle and hit the third employee in the left arm and leg. The third employee fell to the ground and the drive side of the header was resting on the employee's left leg. The employee suffered a broken left tibia, fibula, and humerus as well as a sprained right ankle.",1
"An employee was inside a hull stepping up onto staging from the keel when he lost his balance, fell 3 feet down, and landed on his left leg, breaking his femur.",1
"An employee was bundling pipes. When he pulled one down, it rolled over and smashed his fingers, amputating the tips of his left ring and middle fingers.",0
"An employee was soft washing the roof of a one-story house when he slipped and fell 12 feet off the roof onto the pavers below. He was hospitalized with three fractures on his mid vertebrae, a bruised left knee, a laceration to the back of his head, and a concussion.",1
"An employee was riding on the rear step of a garbage truck when the driver moved the vehicle onto the shoulder to avoid an oncoming vehicle. The employee was caught between the truck and a tree, suffering a rib fracture and chest contusion.",1
"An employee was transporting drums of finished polyester resin to a reactor for rework. When he removed the bung on one of the drums, the polyester resin splashed his face, causing a chemical burn.",1
"On August 19, 2019, an employee was preparing to trim a tree. The employee climbed a ladder and buckled into a tree limb when the limb snapped, causing the employee to fall approximately 15 feet to the ground below. The employee was hospitalized with broken ribs and a fractured spine.",1
"An employee was loading packages onto a van line when the employee was caught between a package and the line's fixed static rollers (not powered), resulting in a partial left ring fingertip amputation.",1
"An employee was rebuilding a diesel engine at a customer's power generation plant when he attempted to move a four-wheel trailer out of the building that was in his way. The trailer was on a slight incline and, due to the size and weight, got away from him and headed toward some valves and piping along the fence line. He attempted to get in front of it to redirect and steer it when he twisted his lower back and pelvis area, causing factures to the lower vertebra and pelvis. He was hospitalized.",1
"An employee was using a table saw when the wood flipped and the employee's hand slipped, resulting in a left thumb tip amputation.",0
An employee lost her balance and fell backwards while putting back a hand-held basket. She injured her right hip.,1
"An employee was stung by several bees while weed whacking, suffering a reaction that required hospitalization.",1
"An employee was operating an overhead crane to lift a stabilizer from a test fixture. The stabilizer shifted and one end swung upward towards the injured employee, contacting his left forearm and trapping his thumb between the stabilizer and the crane remote sitting on top of the test fixture. He was able to use his other hand to raise up the stabilizer and release his hand. His left thumb tip was amputated.",1
An employee cut his left wrist using unguarded grinder with a saw blade.,1
An employee was welding a large casting when he passed out from heat-related illness and fell into the hot casting. His helmet also cut his lip. He suffered a facial abrasion and burns to the stomach and arm.,1
An employee was re-positioning a gasket between two steel pipes when a pipe shifted and the employee's left middle finger was caught between the pipes. His left middle finger was amputated at the end.,1
"An employee was preparing a food cart when the employee suffered an abdominal strain, requiring hospitalization.",1
"An employee was attempting to lift a manhole cover when the cover caught the employee's right middle fingertip, resulting in a fingertip amputation.",0
"An employee was operating a pallet jack when her foot was caught between the pallet jack and a trailer, breaking her foot.",1
"An employee was helping a customer load items in her car when she tripped over a bag behind her and impacted the ground, breaking her knee.",1
"Two employees were repairing a steam leak on a pre-dryer on a 20-foot elevated surface. While welding, both employees fell approximately 20 feet when they both lost their footing on the platform. One employee fell on a peg that punctured his right thigh and was subsequently hospitalized. The second employee received a head laceration that required 9 stitches. The second employee was treated and released the same day.",1
An employee was assisting a customer to position a shaker basket on a shaker skid utilizing a forklift operated by the customer. Three of the employee's fingers on the left hand were caught and injured between the shaker basket and the cross support of the shaker skid.,1
An employee fell off an extension ladder to the cement ground while hanging a banner and suffered a broken jaw.,1
"On August 19, 2019, an employee was riding on an ATV to check leaks in pipe lines when the ATV flipped over in a washout.  He was hospitalized with eight fractured ribs.",1
A temporary employee suffered a foot amputation while operating a cardboard compactor.,1
"An employee was hooking a load up to a crane when the employee walked into a conveyor line. A steel pipe was coming down the conveyor line and struck the employee, causing side and stomach contusions.",1
An employee was cutting 1/2 inch round metal rod into 4-inch pieces using a horizontal band saw. As the employee removed a piece the glove on his left hand was caught pulling his hand into the blade. Part of his left hand and two fingers were amputated by the saw blade.,0
"An employee was holding the guide wire rope of a rig that was being relocated. The employee walked into the loop of the guide wire over the base beam as a cable moved forward and was caught between the base beam and the loop of the wire, breaking the left lower leg.",1
"An employee was selecting cases of napkins from a pallet. The product on the bottom of the double stacked pallets became compromised and caused the above pallets to lean forward. After the employee selected a few cases of napkins, the pallets fell forward. The employee had her back to the pallets at that point and was struck by several cases of napkins as she went to the ground. She was hospitalized.",1
"An employee was in the process of shrink wrapping a pallet when it shifted and struck him, fracturing his shoulder.",1
"After fixing a roof that was making excessive noise, an employee became ill and was hospitalized for heat exhaustion.",1
"An employee lost balance and fell from an 8-foot ladder onto a desk, suffering a broken hip.",1
"An employee was using a rag to wipe off oil on a part that was being cut by a horizontal band saw. The saw blade caught the rag and pulled the employee's hand into the saw, resulting in a partial amputation of his right fifth fingertip.",0
An employee climbing a pole during training activities became ill and was later hospitalized for heat stress.,1
"An employee was driving a pickup truck towards the hangar. When he turned towards the hanger door the truck impacted the stationary clamp used to secure the hangar doors. He struck his head inside of the vehicle and sustained a concussion, forehead laceration, and a herniated disc in the neck.",1
An employee was working around a ditch when his hands and torso started to cramp up. He was hospitalized due to heat stress.,1
"An employee was moving a steel plate with a chain. The chain caught the employee's right middle finger, severely injuring it. The fingertip was amputated.",0
"An employee walking on a wet floor slipped and fell, hit the back of his head on the floor, and was hospitalized with a concussion.",1
An employee was caught/struck by a backhoe bucket while attempting to open a storage container. The employee sustained injuries to both lower legs and was hospitalized.,1
"At the end of an employee's work day, he took his personal vehicle down to the location and parked his vehicle to tell a loader some information. His body was then pinned between a loader tire and his personal vehicle. He suffered abrasions, bumps, bruising, swelling, back pain, and lower body pain.",1
"A maintenance employee was preparing to rotate a degas vessel. He was looking up at the hoisted platform above the degas vessel when his foot was caught between the vessel and the platform, resulting in a fractured and de-gloved left great toe.",1
"An employee was pulling a pallet of product in a walk-in freezer when he slipped on a substance and fell on the floor, fracturing his left hip.",1
An employee was painting when the employee slipped and fell.,1
An employee was helping to assemble scaffolding near a fluidized catalytic cracker at a refinery. He began having heat-exposure-related symptoms. He was hospitalized and treated for low electrolytes and dehydration.,1
An employee was shutting the doors on a scrap trailer when he slipped and fell onto a sharp object that caused a 4-inch wide and 1-inch deep laceration to his left knee (2 inches below).,1
"An employee was loading packages averaging 15 to 20 pounds onto the back of a van that could not be flushed into the van line (dock) because the van's bumper size. While the employee was tossing a package into the van from the van line (dock), he lost his balance and fell about 28 inches to the ground. He broke his right leg and was hospitalized.",1
"On August 20, 2019, an employee was adjusting the forks on a powered industrial truck when a second employee drove down an adjacent row and struck/pushed returnable metal frame packaging toward the first employee. The first employee was pinned between the packaging and the mast of his powered industrial truck, suffering fractured ribs, a lacerated kidney, and a lung contusion.",1
"An employee had just replaced a rubber O-ring on a manifold and was trying to put the bull plug back on the missile when it slipped off and took the employee's hand down, striking it against the flat metal plate below. As a result, the employee suffered a partial fingertip amputation.",1
"Two employees were capping off an old gas well when the pressure of the well reached a high level and the well head blew off. One employee sustained fractured facial bones, contusions and burns to the chest, and shrapnel in the skin of the lower and upper torso.",1
An employee was providing home health services to a patient when she missed a step and fell to a lower level. She sprained her right ankle and fractured her left patella.,1
An employee was walking into work when she slipped and fell on a rug. She fractured her proximal humeral head and required hospitalization and surgery.,1
"An employee parked his electric pallet jack next to a delivery van and stepped off. He then decided to move the electric pallet jack away from the van, pulling it towards himself. His lower left leg was crushed and broken between the bumper of the van and the electric pallet jack.",1
"An employee was carrying display boxes at a store when he tripped and fell to the floor, fracturing his hip and requiring surgery.",1
"An employee fell from the same level while moving chairs and floor mats, suffering a broken hip.",1
"An employee stepped onto an unsupported cantilevered platform. The platform gave way and the employee fell approximately 7 to 8 feet into a water retention pit below, suffering a head laceration.",1
An employee was standing on a pallet and lifting a box when the employee lost balance and fell to the floor. The employee was hospitalized with left leg and hip injuries.,1
"An employee was cutting a piece of metal with a saw when the saw blade broke and lacerated his leg, requiring stitches.",1
"An employee was moving oxygen-compressed air cylinders when one started to tip and fell onto another bottle where his finger was. His finger was caught between the two bottles, fracturing his left pinky finger and knuckle.",1
An employee suffered an electrical burn to his left hand when he took a part out of a machine.,1
An employee was loading a truck when he was stung by a bee.,1
An employee was painting three links on a railcar's hand brake chain when his right-hand fingers were caught in the chain and pulled into the brake housing. He suffered partial amputations to the index and middle fingers.,0
"An employee was removing flash from a forged product using a long rod.  The forge operator did not see the wand while it was within the press, cycled the hammer, and struck the wand.  The wand then flew upwards, striking the employee in the right side of his face and resulting in a fractured jaw and cheek bone. The employee fell backwards and struck his head, resulting in a skull fracture.",1
"An employee was hand digging a shallow trench for an electrical conduit installation. While digging the trench, the employee encountered tree roots.  To remove the tree roots, he cut partially through the roots with his personal utility knife. After cutting the majority of the exposed roots, he placed the utility knife outside the trench. He then attempted to pull the remaining roots and the sudden release of the roots caused his arm to rotate backwards, allowing his left wrist to contact the utility knife blade and suffer a laceration.",1
An employee was removing the rigging rope from a telehandler after loading a stack (3) of trusses onto an exterior wall when the telehandler shifted forward and caused the telehandler jib to strike the employee. The employee suffered a broken femur.,1
An employee was adjusting a product in a packing machine when the machine caused an injury that resulted in the amputation of the left first distal phalanx.,0
"An employee was pulling a lift gate down with his right hand when it closed on his left hand, crushing his left middle and ring fingers.",1
"An employee was loading a part into a press when it actuated, resulting in the amputation of the two left middle fingers.",1
"An employee was leaving a chicken house through a door when the door slammed on and crushed his finger, resulting in a left middle fingertip amputation.",0
"An employee was cutting an aluminum bracket with a miter saw when the bracket pinned his finger up against the backstop, resulting in fingertip amputation.",0
An employee was laying hot rubberized asphalt material when it splashed and burned the employee's left wrist.,1
"Employees were at site to plug a well and were pulling casing from the well and laying them on a skid. An employee who was standing on a metal bench/stool lost his footing. The case fell off the rack and struck him in the right leg, breaking his tibia and fibula. He was hospitalized and had surgery.",1
"While delivering mail, an employee began to suffer heat-/dehydration-related illness.",1
An employee was on a step ladder running wire along a ledge above the door when he fell off the step ladder sideways and hit a plastic slop sink with his left side. He fractured four ribs.,1
"An employee was cutting a piece of wood with a table saw when the blade cut his right pointer finger, resulting in an amputation and fracture above the first knuckle.",0
"Two employees were setting up to test a piece of equipment with a hydraulic clamp. The first employee started to operate the hydraulic clamp grip while the second employee's hand was in the grip and the clamp closed on his hand, crushing his right index fingertip. His fingertip had to be amputated to the nailbed.",0
"An employee was moving a portable rolling section when two other employees pushed the section at the same time, crushing his left index finger.",1
"An employee was practicing football when his foot became stuck in the ground, resulting in a dislocated/fractured right ankle.",1
"An employee fell to the ground while climbing a powerline utility pole, fracturing three ribs and requiring hospitalization.",1
An employee was cutting a block of meat using a bandsaw. The saw blade cut his right little finger; the tip was medically amputated.,0
"An employee was using a chain hooked around scrap lodged in a shear's press box and attached to an excavator's grapple. When the employee put tension on the chain it broke, causing the grapple to swing and strike the employee's leg. The employee's left leg was fractured, requiring surgery.",1
"An employee was run over by a semi-truck while directing traffic in the recycle yard, suffering full-body, right-side injuries.",1
"An employee was replacing a fire hydrant when he became dehydrated and cramped up, requiring hospitalization for heat stress.",1
"An employee was using a band saw to trim a plastic part. As he moved the part, the band saw caught his left ring finger, amputating the fingertip down to the first knuckle.",0
"An employee was sliding a 30-pound rotor into a rotor block when his finger was caught in a nip point, resulting in an amputation of the right fourth digit (1/2 to 3/4 of an inch).",1
"An employee was loading a coil into a machine when the coil became jammed. When the employee unjammed the coil, the machine's spindle caused an amputation of his right ring finger.",1
An employee was offloading petroleum gas from a tanker when the oil-based petroleum gas liquid sprayed him as he removed the hose. He sustained chemical burns to both arms.,1
"An employee slipped and fell on the restroom floor, breaking the left ankle.",1
An employee was standing on a chair in a restroom while opening a paper towel dispenser when he fell to the floor and fractured his hip.,1
"An employee was assembling a pre-hung residential door and needed to add some wooden door jamb extension strips to achieve the proper dimensions for the opening size. He was ripping a board to the needed size on a table saw when the board kicked back. He pushed it back down and his finger came in contact with the blade, lacerating his left index fingertip. As a result, his skin had to be surgically trimmed.",0
"On 8/21/2019, an employee was cleaning inside the back of a box truck while the equipment was running. Toward the end of the shift, the employee began feeling lightheaded and nauseated due to possible heat stress. The employee was hospitalized.",1
An employee was securing a vessel to a dock. The employee's right foot got stuck between planks and the big toe was crushed.,1
An employee was cutting a driveway to pour concrete when a motorcycle came around the flaggers and signs and hit the employee. The employee suffered a broken leg.,1
"An employee was unloading a large metal container that holds mail trays. She removed the netting from the front of the container to retrieve the trays and placed the netting on the ground. After retrieving the trays, she tripped on the netting and fell to the ground, landing on the trays she was carrying. She broke her hip.",1
"The injured employee was directing another employee (fork truck operator) on the placement of a 12' x 8' container onto a flatbed trailer. The employee was pointing to the place on the trailer where the container needed to be in order to secure it for transport. When the injured employee moved his hand, he felt a tug on his right index finger. He observed that the tip of his right index finger had been amputated.",0
"An employee was climbing onto a trailer when he fell to the ground, breaking his wrist and injuring his hip.",1
"A conveyor caught an employee's left hand during maintenance, fracturing the arm.",1
"An employee was walking over a transfer surface for hot steel bars when the employee fell towards the hot bar. The employee's right leg came in contact with the hot bar, receiving second and third degree burns from the knee down and above the ankle. The employee also received a burn on the left wrist.",1
"On August 21, 2019, a temporary employee was applying grated cheese to a pizza crust moving on a conveyor line to a plastic wrapping system. He was attempting to grab grated cheese that drops into a catch bin under the conveyor when his finger was caught in the chain and sprocket system, resulting in a finger amputation on his right hand.",1
"An employee's right hand was crushed by an industrial press, resulting in an amputation.",0
"On August 21, 2019, an employee was on break in the cafeteria and walking to a table when the employee slipped and fell to the same level. The employee suffered a broken hip, requiring hospitalization and surgery.",1
"An employee was stung on the neck by an insect while collecting garbage, requiring hospitalization.",1
An employee fell 24 feet from a third floor while installing plywood on the exterior of a building. The employee was hospitalized for bruises and contusions.,1
A driver was on his trailer handling a tarp when he slipped and fell to the ground sustaining a head injury.,1
"An employee was running sheet metal panels though a panel machine when the employee's hand went under the sheers, resulting in an amputation to the left hand (only the pinky finger remains).",0
"An employee was passing through the atrium area of the facility to another area where she tripped over a floor mat and fell to the floor.  She experienced a concussion, wrist fracture, and vertebral compression.",1
"An employee was pulling wire mesh into place on a roof deck when the employee fell 14 feet, 7 inches, through a cover-over hole to the concrete floor below. The employee suffered contusions and fractures to the right ankle, right thigh, and L4 vertebra.",1
"An employee was holding a piece of metal attached to a cable when the cable pulled and the employee's hand was caught between a metal part and pipe, causing an amputation of the left middle finger above the second joint.",0
An employee had been connecting generator cables for hours when he felt nauseous and lightheaded. He was hospitalized with potential heat stress.,1
"An employee suffered a reaction while cleaning a kitchen sink with bleach, requiring hospitalization.",1
"On August 21, 2019, an employee was walking outside when he slipped and fell. He hit his head and required hospitalization.",1
"An employee was setting up a stage for a television event when he fell 5 feet off the stage and struck his chest on the edge of the stage, sustaining fractured ribs.",1
An employee was moving a heating coil when it fell on the tip of his right index finger. The fingertip was amputated.,0
"While working in a power plant, an engineer became dehydrated due to the heat. He was hospitalized.",1
An employee was handling and assembling extruding equipment when his fingertip entered the side port of a head body while inserting the flow divider. This resulted in a left index fingertip amputation.,1
"An employee was canvassing addresses for verification purposes. She parked her car on an incline, stepped out, and slipped and fell. She injured her right thumb, broke her left leg, and suffered a swollen eye.",1
"An employee was performing maintenance on a paper machine inside the facility when he started to feel fatigue and sat down. Shortly thereafter, the employee became unresponsive and stopped breathing. He regained consciousness and was hospitalized for dehydration.",1
An employee was tightening a thread inside a relief valve when both of the employee's hands were crushed and fractured by the compression collar.,1
An employee was throwing trash into a burn pile. Something in the trash exploded and burned the employee's face and left arm.,1
An employee fell off a ladder after being startled by an electrical short and suffered head injuries and a broken collarbone.,1
"An employee was hydrostatically testing a pipe when the hydro plug was ejected, striking and breaking her leg. She was hospitalized.",1
"An employee tripped while adjusting a fall mat, falling to the floor and suffering a hip fracture.",1
"An employee was driving a fork truck, headed to a put-away location with a pallet of product, when the employee collided with another forklift. The employee suffered an open fracture of the left lower leg just above the ankle.",1
"An employee was pressure-washing algae on a tank. As he was leaving work for the day, he started experiencing body cramps due to dehydration.",1
"An employee was walking up metal stairs when he slipped, fell, and hit his head on the stairs. He was knocked unconscious and suffered a head laceration and concussion.",1
A security guard was shot in the stomach while standing by a guard booth.,1
"An employee was power-washing concrete at 4,500 psi. The water ran across his right foot, causing a wound to the big toe that required surgery.",1
A maintenance employee was servicing a casting machine when the automatic ladle spilled molten aluminum on the employee's back. The employee was hospitalized with severe burns to the back.,1
"An employee was setting up a flange machine during training. The machine shifted, pinching his right hand against the flange. The hand was broken and lacerated, and he was hospitalized.",1
"An employee had been trying to clear a clogged drain with drain cleaner. As the employee was using compressed air to clear the drain, the drain cleaner sprayed out and caused second-degree burns to his cheek, nose and forehead.",1
"An employee was in a forklift that was stuck in mud. A truck was pulling the forklift with a chain to get it out of the mud when the chain broke and snapped, hitting the employee who was in the forklift. The employee suffered fractured ribs and a fractured shoulder blade.",1
An employee was delivering mail to a residence when he was stung by a wasp or bee. The employee had a severe allergic reaction and went into anaphylactic shock which caused a heart attack.,1
"An employee was sorting chicken necks on a conveyor belt when her finger was caught between the belt and guide, resulting in an amputation.",0
"On 8/22/2019, an employee was clearing merchandise off a conveyor when the employee's hands were caught in the conveyor, causing flesh wounds that required hospitalization.",1
"A metal vibe plate was being lifted off a truss plate by an overhead crane. As an employee was removing two bolts on the end of the plate, the employee's left little finger was crushed between the plates. The tip was amputated.",0
"An employee was outside helping gather carts from the parking lot. While inside a cart corral, the employee noticed a flat cart was headed towards a vehicle. The employee jumped over the cart corral, landed awkwardly, and sustained a broken leg.",1
An employee was helping secure a container of poultry sanitizing chemical to a forklift when he slipped in a puddle of spilled chemical and fell. He suffered first- and second-degree chemical burns to the left side of his body.,1
"An employee was helping others to pull a pole from a stack and load it onto a digger derrick when the pole fell and struck the employee, fracturing his pelvis and puncturing his bladder.",1
"An employee tripped and fell while walking boars, hitting the boot of another employee in front of her. Later, she collapsed again. In the course of both falls, she suffered bleeding on the brain and scrapes to the right elbow, the right shoulder, and the right side of her face.",1
"An employee was on a compactor platform throwing cardboard into the trash compactor when she fell 1 foot off the ledge of the platform to the ground, breaking her tibia.",1
"An employee was walking toward the building entrance when she tripped on pavement and fell to the ground, injuring her right shoulder, collarbone, ribs, and left toe.",1
"An employee was operating a debarker. When he went to remove a log, a chain grabbed his left foot, tearing off the skin and breaking bones.",1
An employee was attempting to clear a piece of wood stuck under the guard of a cabinet defect saw. The saw activated and amputated the right middle and ring fingers at the first knuckle.,0
"An employee was in a bucket trimming limbs with a hydraulic stick saw. A cut limb fell onto a primary power line, pushing the primary line down into the neutral line. The resulting arc flash burned the employee's right hand.",1
"An employee was strapping freight to a truck trailer. A forklift moved and struck the employee, causing a broken foot/ankle.",1
"An employee was cutting material with a band saw. He turned off the band saw to straighten the material in the vice. When he pushed the button to close the vice, his left middle finger was still in the vice as it closed, resulting in an amputation of his finger to the first knuckle.",0
"On August 22, 2019, having spent the previous two days installing solar panels at a residence and feeling nauseous at the end of the second workday, an employee felt unwell and lost consciousness at work. The employee was hospitalized for heat exhaustion, dehydration, and related kidney function issues.",1
"An employee was mixing rubber on a mill when the employee experienced shortness of breath due to heat stress, requiring hospitalization.",1
An employee was on a ladder installing internet at a residence when the ladder tipped over and the employee fell to the ground.,1
"An employee was walking and carrying pants inside the store when she tripped over another employee's foot. She fractured her left hip and elbow on the ground, requiring hospitalization.",1
"An employee was preparing to hook up a hoist to an engine when it fell off the table it was on and pinned his feet, fracturing them.",1
An employee was performing pest control services at a customer's home when the employee was bitten on the hand by a snake or spider. The employee was hospitalized.,1
"After cutting insulated panels outdoors, an employee was climbing a stair to a work trailer when he fell to the ground due to heat exhaustion and dehydration, injuring his shoulder. He was hospitalized.",1
An overhead lineman was elevated in a bucket while removing the rubber cover from a primary power line. An arc flash caused first- and second-degree burns to the employee's stomach and the area under the right arm. The employee was hospitalized.,1
"An employee was stopping a fan belt when his finger was caught between the fan belt and pulley, resulting in a fingertip amputation.",0
"An employee was clearing a tile jam on the line when the employee's fingertip was injured, resulting in the amputation of 3 mm of the left little fingertip.",0
"An employee was removing tie-down straps from a trailer load of plastic pipe. When the tie-downs were removed, the pipe rolled off the trailer and struck the employee's left ankle, fracturing it.",1
An employee had been moving materials and was found laying on their stomach on the floor with a fractured skull and laceration requiring 2 staples. It is believed that the employee had a seizure and fell striking their head on a lag bolt that holds a guardrail in place on the concrete. The employee was hospitalized.,1
"An employee was learning to operate a table saw and was cutting a wooden 2x4 when the employee's left hand contacted the saw blade, resulting in a left index finger amputation.",1
An employee climbed a ladder to the roof. He slipped on the roof's surface after dismounting the ladder and fell to the ground. He suffered fractured L1 and L2 vertebrae.,1
"An employee's finger was caught in a set of double industrial automatic doors, causing an amputation of the right ring distal fingertip.",0
"An employee was loading an oil drum onto a hand truck. Upon placing the oil drum onto the hand truck, the employee's fingers were caught between the two objects. The employee sustained amputations of the right middle and index fingertips.",0
"An employee was changing air hoses on a milling machine and had loaded wood to run through the machine. While pushing the wood through the milling machine, the employee's right hand fingers were struck by the rotating sharper head and the employee suffered amputation of 1/3 of the third digit and amputation of the second digit underneath the first knuckle.",0
"An employee was changing out an empty tote of wash for a full tote in a foundry. The mixer/frame fell and struck the employee's left arm, causing a compound fracture.",1
"An employee was standing on the ground as a come-along was being lowered from a roof when the come-along came loose and fell, hitting the employee. The employee sustained a head injury.",1
"An employee was working in the warehouse when he tripped and fell, breaking four ribs and requiring hospitalization.",1
An employee fell while climbing a 10-foot scaffold to access a swing stage scaffold directly above it. The employee suffered a broken tibia in the left knee with damaged ligaments.,1
"An employee was helping another employee string a wire at a press when his finger was caught by the press, resulting in a fingertip amputation.",0
An employee was arranging a rebar wall for a vault that was being constructed when three parts of the rebar became detached and struck the employee in the head and chest. The employee was hospitalized.,1
"While operating a motorized walk-behind pallet jack, an employee's hand was caught between the handle of the machine and a shelf. This resulted in a fracture to the right-hand pinky finger and dislocated right thumb, requiring subsequent surgery.",1
"An employee was working on commercial roof to pick up a debris and materials. He picked up a piece of plywood put there by another contractor. He did not know it was covering a 4' x 4' hole, stepped in it, and fell 20 feet to the concrete below, breaking his right foot and requiring stitches on his left leg.",1
An employee was crossing a street on campus when the employee tripped over the base of a pedestrian crossing sign and broke a leg on the ground.,1
"An employee was operating a stand-up mini skid loader when one of the track's slid on some rocks, causing the machine to tip over. The employee's left leg was caught between the machine and a building. The employee was hospitalized with bruising to the upper left leg.",1
An employee fell while operating a powered pallet jack and her right foot became lodged underneath. She pulled her foot out from under the equipment and suffered a fracture to her right heel. She was hospitalized.,1
"An employee tripped over a rake that was propped up and fell, landing on the floor and a tape measurer that was on the employee's tool belt. The employee was hospitalized with a fractured right femur.",1
An employee became dehydrated while delivering building materials due to the heat.,1
"An employee was working in the front stock room. She was standing on an 8-foot ladder near the top, putting 8-pound boxes onto shelves. She lost her balance and jumped from the ladder. She landed on both feet and suffered heel and ankle fractures.",1
"An employee was unloading a truck at the loading dock when the employee fell backwards off the dock to a lower level, striking his head on concrete. He sustained a head laceration requiring stitches, and blood on the brain. He was hospitalized.",1
An employee was tripping pipe when the pipe stand shifted on soft ground and the pipe hit his leg. He was hospitalized with a fractured leg and had surgery.,1
"An employee was struck and run over by a forklift that was driving in the forward position with wood pallets stacked approximately 5 feet off the ground. The employee sustained a severe laceration to her left leg, a fractured left ankle, and contusions to her right leg and arms.",1
"An employee was using a jib crane with a magnetic attachment to lift a steel plate. While stabilizing the load with his left hand, the weight shifted and his left middle finger was pinched between the magnet and the hook partially amputating skin from the finger.",0
"An employee was using a ""blast car"" to transfer a vehicle from the blast room to the staging area. The employee was found beneath the blast car carriage, and required an amputation to the left leg below the knee.",1
"An employee slipped and fell while walking down stairs, hitting the ground and suffering a head injury.",1
"While dismantling a catwalk, an employee fell about 20 feet off the catwalk to the ground, breaking the right arm, left leg, and multiple ribs. The employee was not tied off at the time of the incident.",1
An employee was installing a cylinder underneath a trailer when a bolt on the conveyor came off and the trailer's back end came down and struck the employee. The employee suffered a fractured skull and broken ribs.,1
"An employee was attempting to repair a crane boom dolly. The employee released the air supply to the crane boom dolly, allowing the brakes to release. The dolly rolled over its wheel chocks back toward the crane, pinching the employee between the crane and dolly. The employee suffered a fractured pelvis.",1
"On August 23, 2019, an employee was positioning a scissor lift underneath a vehicle and reached up under the lift with his left hand when the lift collapsed on his left arm, breaking it.",1
An employee was operating an electric pallet jack when the pallet jack was placed in reverse and pinned his left ankle between the pallet jack and a pallet. His left tibia/ankle were fractured.,1
"An employee was running electrical cord while standing on a ladder extended against a tree. The ladder became unstable. The employee then dismounted the ladder and his foot landed on a root, resulting in a broken left ankle.",1
"An employee was prepping to start cutting on a copper pipe with a cordless grinder. When the employee started to cut on the pipe, the cordless grinder slipped and cut him on the top of his left hand, causing a deep laceration.",1
"An employee was at a roaster machine moving a manual cart with a part on it. The employee's finger was pinched between the cart and a frame of the machine, resulting in an amputation to the left ring finger with no bone involvement.",0
"Employees were moving a pipeline inspection tool barrel. The injured employee was pulling on the rigging in order to allow a forklift to move the barrel through an open door. As the barrel was coming through the door, the rigging slipped off the fork and the barrel landed on the employee's foot. The employee's two left toes adjacent to his big toe were amputated.",0
"An employee was cutting sheet metal when the sheet metal shear contacted his right middle finger, resulting in a fingertip amputation.",0
"An employee had just concluded pumping fish from the fish hold on a vessel. He climbed out of the fish hold from a fixed ladder and then slipped from the main deck of the vessel, falling approximately 9 feet backwards into the fish hold and landing on his back. He was hospitalized with a stable fracture to the back.",1
"An employee was positioning a riding lawn mower when he lost grip and fell to the concrete floor, breaking his right femur and requiring hospitalization.",1
"An employee was on a ladder installing a nut and bolt overhead when he fell 5 feet off the ladder to the concrete floor, hitting his head and fracturing his skull.",1
An employee was opening a valve when the hot caustic (main component: sodium hydroxide) from an adjacent valve that was open sprayed him. The piping was shut down for maintenance and the injured employee was restoring it to service prior to the incident. The employee sustained a second degree burn on 2% of the right leg surface. The employee was hospitalized.,1
"An employee was helping clean a patient up. The employee then leaned over the  bed to press the ""weight"" button. The employee lost her balance and her right foot became caught on a cord under the bed. The employee fell to the floor and broke her left hip.",1
"An employee was cleaning/restocking a bar area and carrying a case of drinks when she stepped backwards and tripped over a flatbed rolling cart. She fell to the ground, hitting and fracturing her right elbow.",1
"On 8/24/2019, an employee was unloading wooden building materials from a truck using a forklift. At the jobsite, a vehicle was in his way, so he lifted the load above the vehicle. The forklift then tipped forward. While the forklift was tipped, he attempted to exit the forklift and fell against the roll cage structure, fracturing his shoulder.",1
"An employee had been collecting grocery carts in a store parking lot after the power, which had gone out, was restored to the store. The employee started to feel unwell and was later found laying down. He was hospitalized due to heat exhaustion and acute kidney failure.",1
"An employee was operating a forklift when his foot became pinned between the forklift and a rack, resulting in a broken foot/leg.",1
"An employee was loading a cart with flowers when the employee stepped back, twisted a heel, and fell backwards to the ground. The employee suffered a hip fracture.",1
"On August 24, 2019, an employee was unplugging the rotary valve under a cyclone when the employee's left index finger contacted the moving rotary valve, resulting in a partial amputation of the left index fingertip.",0
"An employee slipped while descending an A-frame ladder and attempted to grab a rail, which pinched his left pinky, resulting in a partial pinky fingertip amputation.",0
"On Saturday, August 24, 2019, at approximately 2:45 AM, an employee was carrying a lithium ion battery in his pocket when the battery failed and exploded, causing a burn injury to the employee's right leg. The employee was hospitalized.",1
"An employee was cleaning and doing routine maintenance on a screen conveyor belt when he lost his footing and fell backwards onto the belt, suffering fractures to the lower back.",1
"An employee tripped on a floor mat while walking and fell to the floor, fracturing the right hip.",1
"An employee was placing supplies under her cash register when her shoelace became caught. She lost her balance and fell onto her left side on the floor, fracturing her left hip.",1
"An employee was transporting a 5-gallon ink bucket on a 3-wheel scooter when the rear right tire struck a conveyor, causing him to be ejected onto the concrete floor. He suffered a dislocated vertebra disc.",1
An employee was repairing a turntable when the turntable unexpectedly activated and punctured the employee's leg. The turntable was unguarded at the time of the incident.,1
An employee was driving an electric pallet jack with double-stacked pallets when the top pallet (900 pounds) fell on the injured employee and fractured both legs.,1
"An employee was replacing lighting fixtures at a customer's location. The circuit to the section where the employee was working was de-energized, but one fixture was incorrectly tied to a separate circuit, resulting in an electrical shock to the employee.",1
"An employee was running an electrical wire and ethernet cable across a large dip tank when the tank cover collapsed and the employee fell into the tank, which was full of alkaline cleaner. The employee received chemical burns across the entire body.",1
"An employee was helping to disassemble a scaffold when the employee fell 13 feet through a board that gave way, suffering rib and back injuries.",1
An employee was trying to set a spring-operated dock plate in place when a malfunction occurred and the employee's fingers were pinched in the dock plate. The employee suffered right index and middle fingertip amputations.,0
An employee was on a horse working with cattle when the horse lost its footing in mud and fell with the employee to the ground. The employee broke a finger and was hospitalized.,1
"An employee was walking in the restaurant when she tripped over a phone cord and hit the floor, breaking her hip.",1
"An employee was climbing a steel two-section, truck-mounted ladder when one section shifted and caught the employee's finger between rungs. The employee's left ring fingertip was amputated at the first knuckle.",0
"An employee was de-energizing the main distribution switch board. The breaker had been opened and locked. He tested it and deemed there was no voltage present at the lugs on the supply side of the breaker. A leg of a ground cluster was attached to the neutral bus. Another leg of the ground cluster came in contact with the energized ""A"" phase on the supply side of the breaker, resulting in an arc flash (480v/277v). The employee sustained first degree burns on the right side of his face and neck and second degree burns on his lips, under his chin, and behind his right ear.",1
"An employee was unloading a truck of ice using an electric pallet jack when the employee slipped on ice that had built up on the floor of the truck and fell, breaking a leg. The employee was hospitalized.",1
An employee's left pinky finger was smashed and fractured between two joints of 12-inch steel pipe while he was laying out pipe.,1
"An employee was climbing onto an over-the-road tractor when the employee slipped off the running board, resulting in a ruptured knee tendon.",1
"An employee was transferring a PVB table from the PVB stretch machine when the middle fingertip on his left hand was compressed between the PVB table and the base of the table holding the PVB table. As a result, he sustained a left middle fingertip tissue amputation (no bone loss or removal of fingernail).",1
"An employee was lifting an auger out of a metal cylindrical screen to clean meat residue off the auger when it slipped from his hand. The fourth finger on his left hand was then pinched between the auger he was lifting and the screen that was resting on the floor, resulting in a distal fingertip amputation.",0
"An employee was being trained on an electric pallet jack when the employee lost control and jumped off the pallet jack, which then ran over the employee's ankle/foot. The employee was hospitalized with a compound fracture between the left shin and ankle.",1
"Two employees were using a scissor lift to access and repair a damaged valve. The employees were approximately 12 feet above the floor. Employee 1 was using a pipe wrench to open the valve when the gasket failed. Hot, production fluid sprayed both employees in the lift, blocking access to the scissor lift controls. Employee 2 climbed over the rail and down the scissors to the ground. Employee 2 sustained first and second degree burns to the face and scalp, was treated and released. Employee 1 fell out of the lift and sustained multiple orbital fractures, a fractured sternum, a broken knee cap, and a laceration to the forehead. Employee 1 was hospitalized.",1
"An employee was using a bench grinder to clean up 2-inch sub assemblies when his right index fingertip was caught between the grinder and the workpiece, resulting in a fingertip amputation at the knuckle.",0
"An employee was changing misters on a condenser unit. The employee fell 10 feet to the ground below, suffering injuries to three lower-back vertebrae, broken toes, and a lacerated little finger.",1
"An employee was repairing an aerial lift when a hydraulic hose leaked, causing high-pressure hydraulic fluid to come out and puncture the skin on the employee's left middle finger. The wound became infected and required hospitalization.",1
"An employee fell off an electric scooter and hit his head on a concrete apron, suffering a severe head injury, cut to the left eye, and loss of consciousness.",1
"An employee was on a ladder inspecting the coil section of an air handling unit when a PVC cap with a steel bushing burst free and struck the employee in the lower right jaw, knocking him off the ladder. He fell backward onto concrete, causing a 1-inch laceration to the back of his head. The impact to his face caused his jaw to break.",1
An employee was cutting 1-by-6-by-6s with a chop saw. The saw amputated the last joint of his left index finger.,0
"An employee was standing on an 8-foot A-frame ladder, cutting exhaust hood ductwork apart for removal. A portion of the ductwork fell and struck the ladder, causing the employee to lose his balance and fall to the floor. The employee suffered a head injury and a broken collarbone.",1
A temporary employee was unclearing a jam of product on an extrusion machine when the employee's hand was caught and injured between moving parts on the machine.,1
An employee experienced heat-related illness while delivering mail on his route and was hospitalized for dehydration.,1
"An employee was dismantling sections of scaffolding. A section of the scaffolding took his personal fall protection with it as it fell, causing the employee to fall about 15 feet to the ground. He suffered a fractured left shin and a laceration to his forehead.",1
"After constructing a concrete sidewalk, an employee was found slumped over during a break. He was hospitalized due to heat-related illness.",1
"An employee was operating a pallet jack to unload pallets from a semi trailer.  The stack of pallets would not clear the door of the trailer, and the top pallet became stuck on the trailer door, pulling it closed on the employee's arm.  The employee suffered a broken left forearm and required surgery.",1
"An employee was attempting to retrieve a part in a punch press machine area when the punch press cycled, crushing and puncturing the employee's left hand.",1
"An employee was driving a forklift with a pallet full of products into a storage container when he put his left foot against the inside wall of the storage container. The forklift then moved, causing his left foot to be caught between the container's wall and forklift. He suffered multiple fractures to his left foot and ankle. He was hospitalized.",1
"An employee was clearing a blockage on hammer mill equipment. A blade in the spout of the airlock struck his left middle and ring fingers, amputating the tips.",0
"An employee had been baking donuts and was walking when the employee slipped on water and fell to the floor, injuring the left knee. The employee was hospitalized.",1
"An employee was loading feed on a trailer when the feed spilled. The employee attempted to clean the feed and fell off the trailer, suffering a loss of consciousness, an open wound and contusion to the head, a fractured left rib and scapula, and two fractured vertebrae. The employee was hospitalized.",1
"An employee's foot was caught on a phone/computer cable and she fell to the floor on her left side. She broke her hip, requiring hospitalization and surgery.",1
"An employee was unloading a furniture box at a customer's location when the box fell and hit the employee's right ankle, fracturing it. The employee was hospitalized.",1
"An employee was cleaning and servicing rental cars. One of the cars pinned him against the wall, causing lacerations and a fracture to his lower extremities. He was hospitalized.",1
An employee was conducting landscaping activities and went to clear a blockage within the blade area of a riding lawnmower when the blade amputated a right-hand fingertip.,1
An employee was emptying a garbage compactor when a metal bar fell on and injured the employee's foot.,1
An employee slipped on beans and wrenched his knee while working.,1
"An employee was lining up a part on a mini punch press machine when the employee's left middle finger was caught between the press and the metal piece, resulting in a fingertip amputation.",0
"An employee was struck in the throat by a patient that came into the emergency room, suffering a contusion to the larynx.",1
An employee was disassembling a paint booth while standing on top of the booth when he fell 7 feet to the ground. He was hospitalized with a fracture to his left ankle.,1
An employee was coming down the roof using an extension ladder when he slipped and fell about 8 feet.  A stick from a recently timed tree went through his bicep.,1
"An employee was using a fire hose to flush water from a newly installed water line when the hose whipped. The employee tripped or was knocked off balance to the ground by the whipping hose, dislocating the left elbow.",1
"After working, an employee felt sick and was hospitalized due to dehydration.",1
"On August 26, 2019, at approximately 5:40 a.m., an employee was walking down the hall when she lost her balance, tripped, and fell into the wall. She fractured her left hip and was hospitalized.",1
"An employee tripped and fell while walking on a work platform, suffering a back injury that required hospitalization.",1
"An employee was walking to her car when she tripped on the corner of a speed bump. She fell and fractured her right wrist, requiring hospitalization.",1
"An employee was adjusting the spray tip of a pneumatic powered paint sprayer when the spray trigger was activated, causing the spray stream of paint to contact the employee's hand. Paint was injected into the employee's hand, requiring hospitalization and surgery.",1
"Two employees were exploring an area within the forest and conducting a field botanical survey. The area included steep, rocky ground and talus slopes. One employee slipped/fell on the rocks of a slope and tumbled 45 feet toward a creek bed. The employee sustained head lacerations, fractures to the C-4  and C-5 vertebrae, and body bruising.",1
An employee was sandblasting rebar so he could lay new concrete when he tripped on a piece of rebar and sandblasted his right foot.,1
"An employee was exiting a box truck when the employee slipped off the step and fell to the ground, breaking the left hip and femur.",1
"An employee was walking toward a trailer to unload it. The employee slipped into the trailer tire, suffering an injury that resulted in knee and calf swelling.",1
An employee was in the process of unclogging a drain valve on a paper machine stock refiner when the pulp material inside the valve sprayed out. The temperature of the pulp material was approximately 140 to 200 degrees Fahrenheit. The employee sustained second degree burns to his left hand.,1
"An employee was loading equipment into the rear storage area of a company truck when the employee's right elbow struck an inside latch mechanism on the rear storage door. The employee then fainted and fell backward. The employee's head struck the ground, causing a concussion.",1
"An employee was repairing an auger when the hook holding the tension on the coil became unhooked and caught the employee's middle fingertip, causing an amputation.",0
"On August 26, 2019, an employee was struck by a vehicle while flagging traffic, suffering a broken pelvis and broken ribs.",1
"An employee was grinding spent marijuana using a shredder/mulcher. As the employee tried to clear a jam, the grinder blade amputated the employee's left index finger.",0
"An employee was climbing up the side ladder of a cement pavement machine. When he was more than halfway up, 5-6 feet from the ground, he fell to the concrete below and broke his left ankle.",1
An employee was grabbing an overhead cable to pull himself up when the metal cable lacerated his fingers.,1
An employee was riding an ATV at a team building event when the ATV flipped. The employee suffered a fractured leg.,1
"An employee was attempting to retrieve a label that was sucked up into a dust collection tube when his right-hand fingers contacted the rotating blades, resulting in amputations of his right middle and ring fingers.",0
An employee slipped and fell. Her leg entered a tank of 180 degree water. She was hospitalized for second degree burns on her left leg at the back side of the knee and ankle.,1
"After performing her duties, an employee was parking the tractor at the dock. The tractor went off the dock and the employee was hospitalized with a fractured skull and a subdural hematoma.",1
"While restocking a vending machine at a customer site, an employee began to fell unwell and suffered cramping. The employee was hospitalized for dehydration.",1
An employee was moving 40-pound crates from one spot to another when his gallbladder ruptured.,1
"An employee was sitting at a computer workstation when she stood up to walk and her foot became tangled in the hoses and cords to the chairside handpieces. When she went to step to her right, her foot was snagged on the hoses and she fell forward, breaking her arm.",1
"An employee's fingers were pinched in tongs, resulting in an amputation.",1
An employee was providing medical surveillance to responding wildland firefighters when the employee was stung by a bee and suffered a severe allergic reaction. The employee was hospitalized.,1
"An employee was arguing with another employee when he was punched in the face, later requiring hospitalization for a concussion.",1
An employee was cutting a 2x4 wood stake with a circular saw when the saw kicked back and severely lacerated the top of the employee's left thumb.,1
"An employee was attempting to free a pallet stuck on its roller system. The pallet would not move so the employee braced himself against the mezzanine guardrail system and pushed.  The weld on the steel upright broke and the employee fell to the floor, breaking both legs and suffering one compound fracture. He was hospitalized and had surgery.",1
An employee and his crew were removing a broken power pole. The top portion of the pole was hung in a tree and still attached to the power lines. The crew was digging the bottom broken section out of the ground when they heard the top portion crack. The broken pole fell on the employee and injured his lower back.,1
"An employee had been pulling customer orders while operating a forklift when a second employee heard him call for help. He was found sitting in a pool of blood with a large cut on the head, requiring hospitalization.",1
"An employee was using a pry bar to separate metal coils and create a gap so a chain could be inserted to lift and load the metal coils onto a flatbed trailer for shipment. During the process, the pry bar slipped and the employee fell backwards to the ground, fracturing his left foot.",1
An employee was struck in the leg by a pipe and sustained a fracture.,1
"An employee was operating material handling equipment (MHE) when he hit a column in the warehouse. Just before impact, he stuck his foot outside of the MHE. His foot was caught between a column protector and the bottom of the MHE, resulting in a fractured ankle.",1
An employee was a passenger on an ATV when the ATV rolled over. The employee suffered a fractured left elbow and a lower back contusion.,1
"On 08/27/2019, an employee was stepping over a 14-inch I-beam on the ground when he tripped over the beam and impacted the ground, suffering a broken rib and bruised arm.",1
"An employee had just removed a food item from a steamer and was walking toward the plate warmer to put the food on top of it. The employee slipped on a small amount of water on the floor, grabbed onto the side of the plate warmer, and suffered an electrical shock.",1
An employee was having shortness of breath and difficulty breathing while delivering beverages to various locations. The employee was hospitalized for dehydration.,1
"An employee was walking into the building, stumbled, and fell to the ground. She was hospitalized for a broken right shoulder.",1
"An employee was working at a policyholder's residence responding to their insurance claim. He was on their outside deck and began to climb up a ladder. He was on the 2nd rung from the ground when the ladder lifted back towards him, hitting his forehead area. He continued to fall backwards, hitting the back of his head on the deck and knocking him unconscious.",1
"An employee was walking down the permanent stairs on a residential construction site when he tripped and fell down seven steps, breaking his left leg.",1
An employee was attaching a jib to a crane. The jib fell and caught his left index and middle fingers between the jib and the top rail of the aerial lift. Part of the left middle finger was medically amputated.,0
An employee was operating a fabric cutting machine when the equipment created sparks and his shirt caught on fire. The employee was burned.,1
"An employee was placing a sheet of corrugated metal onto a lid frame from an intermodal container. As he tossed the sheet onto the frame assembly, the sheet struck his left arm, cut through his welding sleeves and shirt, and caused a deep laceration to his left bicep.",1
"While working inside an air handling unit, an employee's right hand was caught in the fan belt resulting in a middle fingertip amputation.",0
An employee was operating a stand-up mower when the side cover on the deck hit a rock and the blades turned off. The employee's hand entered the deck when the still-moving blades severed a right-hand fingertip to the bone and caused a deep tissue cut.,0
"An employee was replacing a starter generator bracket on a gas-powered golf cart. This required removal of the starter. He removed the seat to gain access to engine compartment and knelt on the floorboard of the car to get into position to perform the task. He loosened the starter generator adjustment bolt so that the starter generator belt could be removed. After loosening the adjustment bolt, he began to pull the belt off the front pully on the starter generator. At the same time, his knee pressed the accelerator pedal on the car. This caused the starter generator to be energized and it began to turn catching his left middle finger between the pully and the belt resulting in a partial amputation.",1
An employee was working at the break chain area using a circular saw to make cuts in a carcass when the saw amputated the employee's left ring finger above the middle knuckle.,0
"An employee was delivering well parts at a worksite. A flash fire burned the employee's upper body, back, arms, and head.",1
A temporary was grinding on the tooth of a plow shank to bevel it when the grinder wheel broke and lacerated the employee's left elbow.,1
"An employee was walking along a gravel road when she stepped into a puddle of mud and fell to the ground, fracturing her right ankle.",1
An employee was struck by a vehicle in the parking lot.,1
An employee was using an overhead crane with a hoist to lift steel band material when the lifting device experienced tension from the overhead crane and slipped from the steel band. The steel band then struck and fractured his chin.,1
An employee was loading a door into the door machine when the boring bit lacerated the back of his right hand.,1
An employee was attempting to clean debris out of a rotary vane under a dust collector when the rotary airlock vane grabbed his gloved left hand and amputated his third and fourth fingertips.,0
"An employee was cutting down a tree when the tree trunk fell and became stuck in another tree. The employee was moving to the other side of the tree, using the tree and stump as leverage to get over the tree. On his way over, the tree rolled, pinning his left index finger between the tree and the stump. His left index fingertip was crushed, resulting in a fingertip amputation.",0
"An employee stood up to check in and assist a patient. When she went to sit back down, she missed the chair and fell to the floor, injuring her right hip.",1
An employee was team lifting a large package onto a tugger cart when he lost his grip on the package and his left hand slipped down. His left middle finger was then caught between the package and the steel frame on the cart.,0
"An employee was preparing to clean up grain from the outside of a grain bin using a grain vacuum. When the vacuum was started, it sucked on to the grain door. It then released suddenly as the employee pulled it off; the employee fell backwards and hit his head and back on a drag conveyor. He suffered a contusion to the back of the head.",1
"An employee was trying to remove a chain that was bound up in a door stacker machine. When the employee removed the chain, it became free and rolled over. The employee's fingers were then caught between the chain and gear, resulting in possible middle and ring fingertip amputations on the right hand.",0
"An employee removed his shoes upon entering a customer's home so as not to soil the customer's floor. As he was taking the stairs leading to the patio, he slipped and fell, hitting his head on the floor and requiring hospitalization for a brain bleed.",1
An employee sustained an amputation of soft tissue on his index finger.,0
An employee was cleaning the soil return belt. She lost her footing and her finger was caught in the rotating parts resulting in an amputation injury.,0
"An employee was installing insulation from a ladder. He fell from the ladder onto a handrail 4 feet below, suffering a broken rib.",1
An employee was walking by a pond area with his lunch box when he fell onto his knees and the grass face first. He was hospitalized for renal failure possibly due to dehydration and heat illness.,1
"An employee was coming down from a roof, about 9 feet high. The employee fell from a ladder to the ground, suffering a broken ankle.",1
"On August 28, 2019, around 3:30 PM, an employee was pulling a 500-pound cart by hand when he backed into a low guardrail that was approximately 1.5 feet tall. The cart then impacted his leg at the calf and shin. The next day, his calf became swollen and blackish, requiring hospitalization and surgery for a muscle injury.",1
"An employee was using a rope to pull down a 50-foot tree when the tree fell on him. He suffered a fracture to his C7 vertebra and a broken hip, requiring hospitalization.",1
An employee was removing entrails from a slaughtered cow when a piece of hair from the cow lodged in his middle fingernail bed on his right hand. The employee developed an infection in his hand requiring hospitalization.,1
"While leaving after shift ended, an employee ran off the road while exiting the facility's parking lot and was found unresponsive and/or incoherent. The employee was hospitalized due to heat-related illness.",1
"An employee was cleaning bag pieces out of a packaging machine when another employee cycled the machine. His right thumb came in contact with an internal blade and the tip was amputated (only flesh, no bone, partial nail).",0
An employee was fabricating metal on a roll former and the roller de-gloved his left index finger. The employee was hospitalized for surgery.,1
An employee was washing a ready mix truck when the employee's water hose became caught on the mixer's drum fin and the employee's arm was pulled into the mixer. The employee suffered a right arm laceration.,1
An employee was operating a powered pallet jack when he struck another party and suffered broken bones in his right foot.,1
An employee was setting a 90-degree elbow while another employee operated the crown. The block dropped and crushed the employee's right hand.,1
"A conveyor jammed and was at a complete stop. An employee cleared the jam and the conveyor activated. It caught his right glove and pulled his hand in, lacerating it.",1
"An employee was closing a roof hatch when it closed on his right hand, resulting in a right hand pointer fingertip amputation and fracture.",0
An employee was loading bags onto a luggage cart. A bag fell off a luggage slide and struck the employee in the head. The employee was hospitalized with a head injury.,1
"An employee was handling an 8 foot, 2x6 board while descending a ladder when the ladder shifted and he fell 5 feet to ground, landing on his feet. The fall resulted in a broken ankle and a compressed spinal disk.",1
"An associate was walking down the aisle to assist a customer, tripped over a pallet, and fell. The employee suffered a broken right hip.",1
"An employee was filing paperwork when she fell to the floor, suffering a broken hip and wrist and a forehead laceration.",1
"An employee walked over to help support a bin of clothing that was on the rear lift of a box truck. The operator started to lower the bin to ground level when it fell off and struck the employee. The employee was knocked backwards and fell, striking her head on the concrete and suffering a possible brain hemorrhage.",1
An employee was cleaning out drill mud sediment from a frac tank. He began to experience body cramps and was hospitalized for dehydration and a heat-related muscle injury.,1
"At about 10:20 a.m. on August 28, 2019, a St. Louis Service Base employee was using an industrial shear to cut 6-inch by 6-inch strips of 3/8-inch-thick steel for an ongoing fabrication project. While placing the metal sheet into the shear, the employee closed the clamping apparatus. The apparatus closed on the employee's right ring finger, pinching it under the metal sheet and amputating the last quarter-inch, with exposed nerve endings and bone damage. The fingertip was medically amputated at the first knuckle.",0
"An employee was threading wire into a wire drawing machine when his finger slipped as the machine was pulling the wire, resulting in a partial amputation of the left ring finger.",0
An employee was evaluating and repairing an AC unit when his left middle and ring fingers were caught in a pulley belt resulting in a laceration and crushing injury to both fingers.,1
"An employee was framing a utility power pole when it rolled onto his right leg, fracturing his tibia and fibula.",1
"An employee was cutting concrete with a masonry saw and using a garden hose to spray water directly on the blade to control dust. The saw became stuck and jumped out of its cut channel, striking the employee in the right upper thigh. The employee suffered a thigh laceration requiring surgery, as well as damaged thigh muscle and tissue.",1
Changing the brushes of an engine. A cable got caught by the rotating engine. The employee attempted to retrieve it and his right hand was pulled to the engine. He suffered a severe laceration on the upper part of the hand.,1
"The injured employee was welding on an assembly line with other workers. After completing a repair, the conveyor started up. The injured employee stepped back to check the weld and was caught by the conveyor resulting in a leg injury.",1
"An employee was using a powered pallet jack to load cardboard into a trailer. He tripped over an empty pallet in the trailer and his right foot and ankle were pinned between the powered pallet jack and the empty pallet, resulting in fractures to the right foot.",1
"An employee was loading a trailer when he tripped over a pallet, breaking his right leg.",1
An employee was cleaning out the bed of his pickup truck when wet mud/concrete slid out and landed on his right foot. Two of the employee's toes were amputated.,0
An employee was laying rebar and preparing to pour cement for a pre-cast wall. The employee lost consciousness while walking to the breakroom and was hospitalized for dehydration and heat related illness.,1
An employee was cleaning the rollers on a printing press. The rag got caught and pulled the employee's hand into the roller resulting in a fracture and partial loss of a nail.,1
"An employee was walking out a door when the door closed on the employee's right hand, amputating the middle fingertip.",1
"An employee was injured during a football game. The employee was running and was tackled from behind, suffering a broken right foot.",1
"An employee was transporting hot dripping fluid to a used cooking oil container when the fluid contacted the employee, causing first and second degree burns.",1
"An employee was moving material around in a warehouse. Sheets of particle board became unbalanced and fell on the employee, pushing him into a stack of drywall. He suffered broken ribs, a punctured lung, and a cut above the right eye.",1
"An employee was on a ladder to remove an electrical box. When he opened the box, he was shocked and jumped off the ladder to the ground. He suffered two broken heels.",1
An employee was returning to his forklift when corrugated boxes that were nearby fell on him. He was hospitalized with a broken left leg and dislocated left ankle.,1
"On August 29, 2019, an employee was driving a sit-down forklift when it struck a barrier. The employee was found unconscious on the ground, having suffered a neck injury. He was hospitalized.",1
An employee's thumb on his left hand was amputated while using a circular saw.,0
A bee stung an employee in the head as he put on his hard hat. He had an allergic reaction and was hospitalized.,1
"An employee was unloading items from the back of a truck. He fell out of the back of the truck and landed on the ground on his knees, breaking both legs below the kneecap. He was hospitalized.",1
"An employee was at a water well working with other employees when the employee suffered from dehydration, requiring hospitalization.",1
"An employee was tearing material from a flat roof, roughly 100 feet from the edge, when the employee stepped on a splice and fell through the roof to the floor. The employee was hospitalized with head and shoulder injuries.",1
"On August 29, 2019, an employee was engaging the brake on a zip line when wind caused the brake to hit and engage the emergency arrest device (EAD). This caused the employee to stop abruptly and be jolted in the air. The employee's foot then hit the zip line and sustained a compound fracture.",1
"An employee was using a step ladder to cut branches off trees. One of the branches fell and hit the ladder, causing the employee to lose his balance and fall to the ground. He suffered a broken right wrist.",1
"An employee was descending from a transmission tower when he fell 25 feet to the ground, suffering a separated shoulder and L2 and L3 vertebrae injuries. He was hospitalized and had surgery.",1
"At 3:48 a.m., an employee was descending from a roof to a lower roof. The employee fell down a stairway, landing 10 feet below and breaking his left leg and foot.",1
"An employee was using an industrial size dust collector (vacuum) to clear out a packaging machine. The employee's hand became caught in a turning valve roll in the packaging machine, resulting in the amputation of the right index and middle fingertips. The machine was running at the time of the incident.",0
An employee was emptying out a soup warmer well when she lost her grip and the hot soup spilled on her chest and stomach. She was hospitalized with burns to the chest and stomach.,1
"An employee slipped and fell on an office floor that had just been mopped, suffering a broken hip.",1
An employee was working on a utility installation (pipe) crew when the employee exhibited signs of dehydration. The employee was hospitalized.,1
"An employee was inflating a tire he had just mounted. It ruptured, causing severe injuries to both his arms.",1
"A truck driver was wrapping and tightening a load at a logging site. He lost his balance while pulling on the wrapper, slipped and fell, suffering broken bones above the left ankle. He was hospitalized.",1
"An employee was changing the chuck in a lathe when the chuck clamped and crushed the employee's fingers, resulting in amputations of the left third and fourth fingertips.",1
"An employee was changing a work piece on the lathe using a pin piece. While screwing in the punch pin, the employee was caught in the machine resulting in a fractured arm and shoulder, fractured ribs, and a collapsed artery requiring hospitalization.",1
An employee operating a forklift struck a rack and sustained a foot injury.,1
An employee was operating a table saw. The employee hit the stop button and reached toward the machine to clear out some saw dust and debris. The blade had not stopped moving at the time and partially amputated the employee's right thumb.,0
An employee contacted a chain on the automatic nailing machine and it pulled his left middle finger into the sprocket amputating the fingertip.,0
"An employee was at a bridge construction project, cleaning up with a shovel. As he was working behind an aerial lift, it backed up and ran over his foot, then his right leg. His leg was crushed.",1
"An employee was inspecting beef on the kill floor when a cattle carcass rolled off an open switch and struck the employee from behind, fracturing the left tibia.",1
"An employee was trying to hook up a dolly to a trailer and slipped while the dolly was moving. The employee's hand was then caught between the dolly and trailer, crushing the left ring and middle fingers.",1
An employee was riding in the cargo bed area of an ATV while completing an exercise when she fell off the ATV and hit her head on the pavement. She was hospitalized with a fracture at the temporal lobe and hemorrhage of the frontal lobe.,1
A forklift operator was loading chicken products onto a crane going to a vessel's freezer area when he struck an employee who was on the dry dock. The forklift's fork punctured the injured employee's right calf and pinned the employee between the forklift and a wood pier piling on the dock.,1
An employee was exiting the building and walking to the parking lot when someone off the premises shot the employee. The employee sustained a bullet wound to the face/neck and was hospitalized.,1
"An employee was rigging up equipment before moving it. When he started to raise the load, the chain tightened around his left hand, resulting in a crushing injury and partial amputation of the left little finger.",0
"On August 29, 2019, an employee was hitching a trailer when the employee's finger was pinched and amputated in the trailer dolly.",0
"An employee was trying to free a screw that was clogged with rice hulls. The employee shut off the power to the screw and went to pull on the belt that was connected to the pulley that ran the screw. While the employee was pulling on the belt, the screw became free. The stored energy from the bound screw caused the belt and pulley to rotate while the employee was holding the belt. The employee's left index finger entered the pinch point of the belt and pulley, amputating the left fingertip above the nail cuticle.",0
"An employee conducted a claims adjustment inspection on the roof of a 10-foot shed and was attempting to descend a ladder from the roof when the employee slipped off the ladder and fell 10 feet to the ground. The employee was hospitalized with a broken shoulder, three broken ribs, punctured lungs, a pulmonary embolism, and cracked thoracic vertebrae.",1
An employee was working outside to prepare for a hurricane. He felt ill and began vomiting and was hospitalized. He sustained a head contusion and possible heat-related illness.,1
An employee on a ladder twisted and aggravated a hernia.,1
An employee was changing an auger on a digger truck when two of his fingers were amputated.,1
"An employee was using a portable band saw to cut threaded rod when the saw slipped and cut his left index finger, resulting in a finger amputation.",0
"On August 29, 2019, an automotive lift fell on an employee, breaking his pelvis and ankle.",1
"An employee was mixing mortar in a plastic bucket using a mixing drill. The mixer caught the employee's left glove, amputating the employee's left little finger to the nail.",0
"An employee was installing an 11- by 2-foot steel plate onto the inside of a barge when the plate slipped and crushed two fingers on the employee's right hand, resulting in the amputation of the third and fourth fingers.",0
Two employees were assembling the mold plates and flipped them over. An employee then picked up a plate and it fell smashing the employee's right index finger.,1
"An employee was on an extension ladder working on a television cable line when the cable broke, causing him to lose his balance and fall approximately 14 feet to the ground. His wrist was fractured.",1
An employee fell off a 4-foot ladder to the ground and broke his leg.,1
"An employee tripped on another employee's feet. She fell and hit her head, suffering a detached retina. She was hospitalized.",1
"After delivering mail, an employee felt unwell and was hospitalized for possible heat stress.",1
"On 8/30/2019, at approximately 11:20 AM, an employee was changing lightbulbs from a ladder when he fell 8 feet to the ground. He suffered a head laceration and concussion, requiring hospitalization.",1
"An employee was walking across a concrete parking lot. The employee tripped on a parking space curb, fell, and struck his face on the concrete, suffering a contusion and a broken nose. He was hospitalized.",1
"An employee was using a forklift to load pallets onto a semi truck. While the pallet load was off the semi, the employee got off the forklift to label it. The forklift moved forward, pinning the employee against the load and breaking his pelvis.",1
"An employee was investigating an issue with a clean in place (CIP) system that cleans pipes. He removed the strainer and disconnected the pump. The pump had pressure behind it and hot water/caustic cleaning chemical burned him on his upper and lower back, requiring hospitalization.",1
"An employee was preparing to load a delivery truck at a client's site. The employee was attempting to position a dock plate at a loading dock when the flap at the end of the dock plate became stuck. When the employee tried to free the flap, it sprung and came down on his finger, resulting in a right index finger amputation.",0
A Pepsi employee was standing in the doorway of a restaurant. The door was partially opened and caught the employee's right index fingertip against the doorjamb. Part of the fingertip was medically amputated.,0
"An employee was attempting to roll a trailer door when his foot slipped off the rear trailer bumper  while he was still holding onto the door strap. The door then came down and crushed his left hand, resulting in an amputation of his left pinky fingertip.",0
An employee was working on a conveyor belt. His right hand was pinched between a transfer plate and a flight; the tip of his ring finger was amputated.,0
"On 8/30/19, an employee tripped over a box and landed on her kneecap. She was hospitalized and had surgery for a broken kneecap.",1
An employee was trying to relieve the tension on a bailer wire channel.  His hand was on the wire/channel when he turned the machine on. The wire then penetrated his left palm and came out the side of his wrist/forearm.,1
An employee was hooking up a dolly to a lead trailer when his index finger was caught between the pintle hook and the dolly.  This resulted an index fingertip amputation before the first knuckle.,0
An employee was cutting meat on a band saw when the saw cut the side and back portion of his left thumb. He received lacerations and an avulsion to his left thumb.,0
"An employee was changing out a forklift's propane tank. The forklift moved and struck the employee, breaking the employee's fibula.",1
"Employees went to a site for a water leak and had to remove the floor access hatch. While doing so, the door came off its hinge. They were attempting to reposition the hatch when the injured employee placed his fingers under the hatch to move it. The hatch then shifted on the broken hinge and dropped on his finger, resulting in the partial amputation of his left middle fingertip (no bone loss).",1
"On August 30, 2019, four employees were working from the top of a commercial building, removing the old roof and installing a new roof. One of them fell through a flush-mounted fiberglass skylight, landing on the concrete floor about 12 feet below. He suffered major head trauma and was hospitalized. Fall protection was being worn, but the safety lanyard was not tied off, at the time of the incident.",1
"An employee was driving a forklift while carrying a pallet. A second forklift driver was directly behind the first forklift traveling in the same direction. The pallet blocked the safety sensor on the first forklift, causing it to suddenly stop. The second forklift then hit the first one and the employee on the first forklift suffered two broken legs. One of the leg fractures was a compound fracture.",1
"At 10:40 a.m. on August 30, 2019, a cook foreman was peeling potatoes with an electrical vegetable chopper. The chopper partially amputated the employee's right thumb.",0
"An employee was tapping the crucible of a bath when the crucible became full. The employee removed the looking glass and molten bath flowed out, contacting the employee. The employee received second degree burns to the arm and abdomen, requiring hospitalization.",1
An employee was loading skids on a trailer with a forklift. The trailer truck moved away from the dock door and the forklift fell 4 feet to the ground. The employee suffered back and neck injuries and a concussion.,1
"At 11:00 a.m. on August 30, 2019, an employee was clearing a lit burn pit. An explosion caused second-degree burns to both his arms and first-degree burns to his face and side. He was hospitalized.",1
"An employee was cleaning the transfer system located at the back of a building. His hand was on a pipe when the sliding gate to the transfer system closed back to its original position, resulting in the amputation of all five left-hand fingers (knuckles and up). The employee was hospitalized and had surgery.",1
"An employee fell down a hill while walking with clients, hitting the ground and suffering impact injuries.",1
"An employee was descending a ladder when his hand was caught in a shackle. He received a laceration to the right palm, near amputation to the right ring finger, and a fracture/dislocation of the right middle finger.",1
"An employee was using a handheld circular saw to trim a fiberglass bathtub. The saw kicked back and fell onto the employee's right foot, resulting in a partial amputation of his right big toe.",0
"An employee climbed a stack of precast concrete products to place support pads onto the top edge of the top product. After placing the pads, he lost his grip and fell approximately 6' 8"" from the stack onto the ground below, breaking his left femur.",1
"On 8/31/19, an employee had tied a chain to a tree limb and attempted to pull it with a truck.  The limb as caught in the crotch of the tree and landed on the employee's leg, fracturing it.",1
"At about 3:30 p.m. on August 31, 2019, an employee fell while walking and was found with a laceration above the left eyebrow, a mild facial fracture, a maxillary sinus fracture, and a subarachnoid fracture. The employee was hospitalized.",1
"On August 31, 2019, an employee was guiding a roll of film into a pizza sauce machine that was being lowered with an overhead hoist when the employee's hand was caught between the film roll shaft and the cradle of the pizza sauce machine. The employee pulled her hand back and received an amputation of the right index fingertip. The unbalanced film roll struck her on the right side of her face between the nose and cheek, causing blunt trauma to the face. She was hospitalized.",1
"An employee was cleaning a semi-truck engine when his right arm caught on fire, sustaining second or third degree burns.",1
"An employee was operating an electric pallet jack when it crashed into a pole, crushing his foot.",1
An employee was standing behind a saw picking up wood as it was being cut when a piece of wood kicked back and struck him. The piece of wood impaled his back and came out of his lower body. He was hospitalized.,1
An employee slipped and fell from a small ladder while performing a cleaning operation. The employee did not lose consciousness and was hospitalized.,1
"On 8/31/2019, an Ovations employee was walking out of a storage trailer/warehouse when he stepped off of the edge of the trailer and fell, hitting his lower back on metal flooring. He experienced pain and could not move the lower part of his body.",1
"An employee was attempting to de-escalate a psych/combative patient when the employee tripped over a rover and fell to the ground, striking the left hip and fracturing the left foot.",1
An employee was cutting a steam pipe. The pipe rolled off the stand and hit the employee. The employee suffered injuries to the right femur and left-side ribs.,1
"An employee was removing excess foam by the second guide in a conveyor when the employee's left ring fingertip was caught between a machinery/door panel and the conveyor line, resulting in a fingertip amputation.",1
"An employee was inspecting under the hood of a fire truck's engine compartment when the hood shut on the employee's right index finger, causing an amputation.",0
"An employee was driving an electric cargo tractor back to his station. The tractor was pulling an empty luggage cart. While taking a sharp right turn, the employee was ejected from the tractor and sustained a fracture to the lower left leg.",1
"An employee was walking back to her work station from a break. She slipped on a puddle of oily water and fell to the floor, breaking her hip.",1
An employee lost consciousness due to exposure to dry ice vapors while moving plasma to a dry ice freezer. The employee was hospitalized.,1
"An employee tripped over a plasma cutter wand cable and fell to the floor, suffering a hip injury.",1
An employee was in a scissor lift when his little finger was caught and injured. The finger was medically amputated.,1
"An employee was putting fries into a deep fat fryer when the fryer boiled over. Hot grease splashed the employee's face and hands, burning them.",1
"An employee was attempting to repair or diagnose an issue with the raise valve on a combine header at a customer's farm. A hydraulic line broke loose, injecting hydraulic fluid into the employee's left index finger and fracturing the finger, requiring hospitalization.",1
"While an employee was emptying a mixer, it activated and fractured his arm. The employee was hospitalized.",1
An employee was helping another employee lower a platform on the side of a pump. A pivotal latch caused the amputation of the first joint of his left little finger.,0
"A piece of quartz countertop material was stored on an A-frame metal storage stand that was 9 3/4 inches off the floor, with wheels on one end and permanent legs on the opposite end. The material slipped off the edge of the stand onto an employee's right foot, breaking two toes. The employee was admitted to the hospital.",1
"An employee was working to pull out drip lines by hand from the ground. While re-winding the line into the tape roller (an auxiliary tractor attachment), the injured employee asked the tractor driver to stop. Then due to a lack of slack, he asked the driver to pull forward. When the tractor pulled forward, the employee was pulled into the roller and sustained broken ribs.",1
An employee was tasked with palletizing debris from a store project. He was using a saw when the saw cut into a finger on his left hand.,1
"An employee was operating a golf cart. While making a turn, the golf cart rolled over onto the employee's leg. He sustained lacerations and a broken lower left leg.",1
An employee came in contact with process fluid at a petroleum refinery. The employee suffered burns to the right arm and torso and was hospitalized.,1
"While walking to the time clock, an employee slipped and fell to the ground and sustained injury to the lower extremities.",1
Five employees were exposed to ammonia released while refrigeration pipes were being welded. One employee (working for National Beef) was hospitalized.,1
"An employee was in training, operating a stand-up pallet lift, when his left foot was caught in the designated pathway railings. The employee sustained torn muscles and ligaments.",1
"An employee was assisting other workers in moving a patient from a bariatric bed to an exam table using a lifting device. Two employees were pushing the patient and two were pulling. While pushing the patient, the injured employee felt pain in her lower back, radiating up to her shoulder blades. The employee was hospitalized with a pelvic injury.",1
An employee was baling hops. The employee shook the bin and a drive chain amputated the employee's left little fingertip.,0
"An employee was lifting a log onto a wood chipper when it fell from the wood chipper, struck, and amputated his right middle fingertip.",0
"An employee was welding and grinding on a 14-inch, 40-foot pipe resting on two sawhorses. As employees adjusted the pipe, it fell off the sawhorses and struck the employee doing the welding, who suffered a broken right thigh bone, a broken left ankle, and an amputated fingertip on the right hand.",1
"On September 3, 2019, an employee tripped and fell backwards onto a 2-by-4 wooden stake that projected 20 inches from the ground. The employee suffered two broken ribs and a bruised spleen.",1
An employee was running a trim press on a forging line. His body started cramping and his supervisor took him to the break room to cool off. He later went to the hospital for dehydration.,1
An employee was water blasting onboard an aircraft carrier when the water lacerated her right calf.,1
"An employee was struck by a rolling 600-pound cylinder, suffering a broken hand and ankle.",1
"A driver was turning an articulating haul truck at the top of a hill at a reservoir under construction. The left tire came off the roadway, and the haul truck rolled over. The driver was taken to the hospital with a bruised back and bruised left ribs, a cervical strain, chest contusions, and a head hematoma.",1
"An employee was conducting a training scenario with pepper spray and a baton. The employee went to get up from his knees, but fell back and rolled on his ankle breaking it in two places.",1
"After operating a lawn mower for approximately 6-7 hours intermittently, an employee fainted while resting outside between the work truck and a trailer. He was hospitalized with heat-related illness.",1
"An employee was placing a steel to block up a conveyor. The conveyor was being raised with a chain fall. It shifted and pinched the employee's left index fingertip, causing an amputation.",0
An employee was on a ladder preparing to do interior framing work in the garage of a single-family home under construction. The employee fell from the ladder to the concrete floor and was hospitalized with a skull fracture.,1
An employee was handing material to another employee when his finger was caught between the material and a hole cover. His right little finger was amputated.,0
An employee was moving pre-finished door products into position for assembly when his right middle fingertip was caught and amputated between finished products.,0
"An employee suffered a heat related illness on September 3, 2019, while setting up tents in a stadium.",1
"An employee pulled a van forward, then got out of the van to check the air pressure. As he was getting the tire gauge, the van started rolling backwards and he was pinned between the van and a pickup truck. The employee was hospitalized with a broken pelvis.",1
"An employee was moving a pipe dolly to a staged piping area. An extended boom forklift's right front tire struck the employee, who suffered a broken pelvis and a broken left femur.",1
An employee fell from a ladder while working on the tailgate of a dump truck. The employee landed on the ground and suffered a broken pelvis.,1
An employee was rolling a 600-pound spool of rubber into position when the spool shifted and the employee's left pinky finger was caught between the spool and an I-beam causing a fingertip amputation.,1
"An employee was on a small stepladder, getting a nut and bolt needed to fasten a steel tool storage cabinet's roof to its frame. A weight shift caused his right arm twist, and his shoulder was dislocated.",1
An employee was clearing a plugged roller mill. The employee's hand was caught in the mill; two of the employee's fingers were severely injured and two were amputated.,0
"An employee was utilizing a ride-on pallet jack. While making a turn, the pallet jack overturned, throwing the employee to the floor and resulting in a fractured left femur.",1
"While walking through the injection molding department, an employee stepped over a skid, got a foot tangled in some banding, and fell on the concrete floor resulting in a broken left hip.",1
An employee was working with an engineer to complete layout for a project on a state roadway. While on the shoulder of the road the employee was struck by a motor vehicle and sustained a compound fracture of the tibia/fibula.,1
"An employee was standing outside his truck at a loading dock. Another truck's trailer struck the employee as it backed up to the dock, causing fractures and open wounds to both the employee's legs. The employee was hospitalized.",1
An employee was using a hoist to change a mold. The hoist pivoted and the employee's finger was caught in a pinch point in the hoist. The left middle fingertip was crushed.,1
"An employee was picking up a 10-inch, 230-pound piece of C-channel, using a 7.5-ton overhead bridge crane. The C-channel slipped off the clamping device and fell approximately 7 feet onto the employee's right leg. The employee was hospitalized with lacerations to the right leg.",1
"An employee was operating a stand-up forklift, delivering a gaylord container of scrap metal to a recycling dumpster. The employee's left foot and leg were crushed between the forklift and a bollard that protects a concrete wall. This resulted in amputation of the leg below the knee.",1
"While a crew was completing a casing connection, which involves pieces of pipe being torqued together, an employee's fingers were caught in the top drive wheel. The employee's right middle finger was amputated, and the index and ring fingers were lacerated.",1
"An employee was dumping a 4-yard dumpster with a truck. The dumpster released and jumped back at the employee, breaking his rib and causing him to suffer a punctured lung. He was hospitalized.",1
"A driver was setting up hoses for fuel delivery. He had connected the vapor line and was walking to set up the next line when he tripped over the lines and fell toward the curb. He landed on his arm, breaking it in three places. He was hospitalized, requiring surgery.",1
A driver was unstrapping a load when a 541-pound truss fell on him. He suffered a neck injury and a broken back.,1
An employee slipped and fell in the parking lot while preparing to make a delivery. The employee sustained a fractured tibia and fibula.,1
An employee was cut while using a box cutter and was hospitalized.,1
"An employee was loading concrete slabs into a dumpster which was attached to a telehandler. The telehandler went into reverse and ran over the employee. The injured employee sustained a fractured pelvis, fractured right fibula, and two broken bones on the left foot.",1
"Employees were conducting roofing work on a flat roof. Debris was being placed into a dumpster via a chute. An employee entered the dumpster to even out the pile of debris. The employee fell out of the dumpster and landed on the concrete pavement. The employee was hospitalized with a broken vertebra and abrasions to the head, hands and back.",1
An employee was operating a saw when it deeply lacerated his left ring finger.,1
"As a field technician was using his hands to check for air leaks, a machine caused amputations to three fingertips on the employee's left hand.",1
"An employee was bleeding liquid from a vapor line. The employee was exposed to anhydrous ammonia from the waist up, suffering chemical burns and an inhalation injury. The employee was hospitalized.",1
"An employee was using a pallet jack to move a pallet of boxes and was struck by a reversing forklift. The employee sustained a crushed right foot that resulted in amputation of three toes, a right ankle fracture, and a torn meniscus in the right knee.",1
A welder was working from scaffolding approximately 12 feet high when a scaffolding plank broke. The employee fell and sustained fractures to the hip and tailbone resulting in hospitalization.,1
An employee was adjusting a gasoline-powered push mower when the blade amputated the tip of the employee's left index finger.,0
"A truck driver was delivering 30-inch PVC pipe. While the pipe was being unloaded from the rear of the truck and the driver was standing nearby, a pipe came out of the cradle in the front of the truck and fell off the truck. It hit the driver's left leg resulting in surgical amputation. The driver was hospitalized.",1
"While walking out of an office an employee tripped over a chair leg, fell to the floor, and broke their right hip.",1
"An employee was heating butter in a pan on a stove. When the butter burned, the employee placed the pan in the sink and poured water on it. The oil spattered and burned her face and arms.",1
An employee was taking the trash out before the end of her shift. While putting the trash in the container the employee slipped and fell on the floor fracturing a hip.,1
"An employee was climbing down a ladder he had been working from. He fell to the ground about 7 or 8 feet below, suffering a compression fracture to the spine.",1
"An employee was spraying an adhesive for insulation. The atmosphere ignited and the employee suffered second- and third-degree burns to the face, neck, arms, and hands.",1
An employee was picking up trash at a job site and had been working since 12:00 PM. The employee passed out and was hospitalized with dehydration.,1
An employee had been at work for approximately 2 hours. He was operating a weld plate press machine when he experienced heat stress symptoms and was hospitalized.,1
An employee was working on the floor near a cart when a forklift hit the cart and the cart hit the employee. The employee was hospitalized with pelvic fractures.,1
An employee's hand was inside a derrick girder when his hand was struck and fractured by the rig's top drive.,1
An employee suffered a cut finger while cleaning painting equipment.,1
An employee was power washing a building while on a 12-foot section of ladder taken from a fiberglass extension ladder. The employee fell off the ladder and sustained broken ribs.,1
"An employee was helping a forklift operator from the ground when the forks became stuck under material. They then recoiled and struck the employee in the throat, bruising it. The employee was hospitalized.",1
An employee fell in the parking lot while walking to her vehicle and sustained a fractured right ankle.,1
An employee was using a pallet jack to unload a pallet of water from a trailer. His left ankle was pinned between the pallet jack and the pallet; he suffered a broken left ankle and a head laceration.,1
"While moving a long fork out of the equipment parking area, an employee's right lower leg was caught and fractured between the long fork and a parked forklift.",1
"An employee was using a stepladder to retrieve items from a top shelf. The employee fell off the ladder, suffering a broken tibia.",1
"While operating a pump, an employee's left thumb tip was amputated.",1
"In the raw meat department, an employee stepped up onto a machine's lift platform that was less than 3 feet high. The employee slipped off the platform and fell onto his back. The employee sustained broken rib(s) and was hospitalized.",1
"An employee was walking in the yard when he tripped and fell to the ground, landing on and bruising his knee.",1
"An employee was using an oxygen acetylene torch when its flame went out. He turned off the oxygen supply to the torch. The flame then returned and the torch's hose separated, causing a large flame that caused second-degree burns to his arms and abdomen. He was hospitalized.",1
A maintenance employee was working on a take-up roller when he fell to the floor and sustained a compound fracture to the left fibula and two broken fingers on the left hand.,1
"An employee was operating a press brake when it caught his left middle finger, amputating it.",0
An employee's hand was caught in a door jamb. The employee's left ring fingertip was amputated.,0
A lineman performing repairs on an overhead electrical line came into contact with the electrical line. The lineman was hospitalized for flash burn injuries.,1
"An employee was gathering carts in the storage area, tripped over pallet, and fell to the floor. The employee sustained a fractured hip and a fractured wrist.",1
An employee was removing jammed cardboard from a box-making machine. The machine lacerated the employee's left thumb.,1
An employee was operating a press brake when his hand slipped into the jaw resulting in fractures to four fingers.,1
An employee was loading a coil roll of steel into a press. The coil roll fell and pinned the employee against the press. The employee suffered broken ribs and internal bleeding and was hospitalized.,1
"A piece of heavy equipment backed up over an employee, who suffered a broken pelvic bone, broken ribs (in the back), and a ruptured bladder.",1
A rattlesnake bit an employee. The employee was hospitalized.,1
"An employee was in a milking parlor when he slipped and fell on a floor that was damp with water. After a couple of hours, he began to suffer a headache and head injury symptoms. He was hospitalized.",1
"An employee had just filled a water tank in a plant. After he removed the hose, the employee used his left middle finger to check the seal on the tank. As he was removing his finger from the tank and simultaneously stepping down from the work platform, he ring was caught in the tank and the left middle fingertip was amputated. He was hospitalized.",1
An employee was operating a CNC machine when it crushed the tip of the employee's left index finger.,1
"While conducting landscaping, an employee was bitten by an insect. The employee sustained an infection.",1
"While an employee was preparing a coupler for installation on a pipeline, residual natural gas flared and caught fire. The employee was hospitalized with burns to the face and arms.",1
A flat bar was being cut on an automatic horizontal bandsaw. A piece of steel tubing was being used to guide the parts being cut into a bin. The tubing moved and the rotating sawblade caught an employee's glove. His left index finger was partially amputated.,1
An employee fell while exiting her vehicle and broke her hip.,1
An employee sustained blisters on the bottom of his feet after working on strip casting equipment that was hot.,1
"An employee moved a forging from the layout table to the centering machine using an overhead crane. The employee removed the crane’s hook from the forging and then moved the crane away from the area. As the crane was moving away, the hook got caught on the centering machine. The hook came under tension and then let loose, striking the employee on the right side of his head. The employee sustained a fractured orbital bone and eye damage.",1
An employee was cutting a pipe with a grinder. The pipe started to slip and the employee tried to catch the pipe. The grinder cut a tendon and artery in the employee's arm.,1
"An employee had been at a customer's home doing warranty work on a shed. After returning to the shop, the employee almost passed out and felt numbness/tingling in one arm. The employee was hospitalized for heat exhaustion.",1
"An employee was operating a hand grinder. When the employee stood up to respond to another employee, the cord/plug of the hand grinder struck him in the neck. The employee was hospitalized and received stitches in the neck area.",1
"An employee was on an elevated walkway. When the employee opened a manway cover, wort boiled over from a brewery kettle, hitting the employee on the chest and abdomen. The employee suffered first-degree burns on the chest and abdomen, second-degree burns on the left arm, and third-degree burns on the abdomen.",1
An employee stopped at a restaurant after completing his mail route. He started cramping and passed out. The employee was hospitalized for a heat-related injury.,1
"An employee had a spool of wire on a spooling machine. The spool was wrapped with plastic wrap and the employee was taping it as it was spinning. While holding the tape with his left hand, he went to cut the tape but it didn't break off. The machine then pulled the employee, flipped him over the machine, and wrapped his arm around the machine. The employee sustained multiple fractures to their arm.",1
An employee working in the yard started feeling weak and was cramping. He was hospitalized for heat stroke.,1
An employee was using a shovel while working on an irrigation system. The employee suffered heat exhaustion.,1
An employee was installing foundation repair equipment when a pipe slipped and struck the employee on the head and left hand. The employee suffered a broken left hand.,1
"An employee was standing at the end of a wrapper line monitoring operating conditions. The employee's left index finger came in contact with a wrapper cutting knife, resulting in amputation of the left index finger.",0
An employee was maneuvering a hospital bed into an elevator when it ran over and injured his left foot.,1
"An employee was lifting the upper part of a galvanizing basket guard when the employee's finger was pinched between the guard and hard surface, crushing/amputating the fingertip.",0
"While using a chemical to clean equipment, an employee suffered a chemical burn to the elbow.",1
"An employee had been working at an asphalt plant. The employee left work around 4:00 PM, and started feeling ill. Later that night, the employee was hospitalized for dehydration.",1
An employee was operating controls to steer and level a trailer. A tire on the trailer made contact with the curb and exploded with a loud pop. The employee sustained ringing in the ear and reduced hearing.,1
An employee was cleaning paint residue off a protective cover of a machine. The employee was scraping with his right hand when his left hand was caught in a moving chain. The left index finger was amputated at the first knuckle.,0
"On September 05, 2019, an employee was clearing out a creamer filling machine when the chain activated, catching and causing an amputation injury to their right index finger.",0
"An employee was descending down the side of a building in a boatswain chair. A kink in the rope got caught in the descending device, causing him to lose balance. He began swinging around and hit his ankle on a protruding concrete balcony. He sustained a compound fracture above the left ankle requiring hospitalization and surgery.",1
"An employee was threading pipe on a machine with two separate clamps, one outside and one inside. The inner clamp closed on the employee's right little finger, partially amputating it.",0
"While transferring a patient from a stretcher to a bed, an employee sustained a herniated disc in her back.",1
An employee was riding a lawn mower when he ran over tree roots and fell off the mower. The mower blade then lacerated his left arm.,1
"An employee was adjusting a tarp on the trailer of his tractor/trailer combination. He was standing on a catwalk, preparing to exit the fixed ladder, when his foot slipped and he fell approximately 8 feet to the gravel lot surface. He sustained a fractured wrist, fractured ribs, and a cracked pelvis.",1
An employee was training on swabbing a bottle in a bottle forming machine when two of their fingertips were amputated by the machine.,1
"While clearing trees for an install project, an employee was struck on the head by a falling tree branch and sustained a head injury.",1
An employee was removing a stay rod nut using a hydraulic pump. He was holding the torque tool with his right hand while removing the nut with his left hand. The hydraulic pump kicked on without the operation control being pressed and pinched his right middle finger between the stay rod and the grease pan. The employee’s right middle fingertip was amputated.,0
"An employee got off a forklift. It rolled forward and its wheel struck the employee's right foot, causing fractures.",1
An employee was hospitalized after he fainted in a sugar cane field due to heat stress.,1
"An employee tripped and fell, breaking his left ankle.",1
"An employee had been cutting wood on a saw machine. While removing debris, the saw blade caused a severe laceration to the employee's wrist.",1
"An employee's safety vest became entangled with a trenching machine's blade, and the blade lacerated the employee's back.",1
"An employee was operating a propane-powered forklift, started feeling dizzy, and was hospitalized for exposure to carbon monoxide.",1
Employees were pulling slips while running drill pipe in a well bore. An employee suffered a hernia.,1
"An employee had just finished a job assignment and went to assist a co-worker. In order to assist the co-worker with the job task, the employee's machine needed a different setup. While changing the setup of the mechanical machine press, the employee's hand was caught in the machine, resulting in a finger amputation.",0
"While observing work outside, an employee suffered from heat exhaustion.",1
"An employee tripped on a lower shelf in a supply room and fell, suffering a broken left hip. The employee was hospitalized, requiring surgery.",1
"An employee was outside of the store, at the loading dock, receiving a shipment of shopping carts. The carts were packaged on a pallet, handle side down. When the carts were separated, they shifted and pushed the employee off the loading dock. He landed on his left side, striking his shoulder, head, and hip.",1
An employee driving a pallet jack entered the rail dock through the overhead door from the expansion dock. He began traveling east on the rail dock and the pallet jack ran into a barrier pole that protects a door on the rail dock. His foot was caught between the pallet jack and the barrier pole. He sustained a crushing injury to the left foot resulting in amputations to the tips of two toes. He was wearing safety toe boots at the time.,1
"An employee was cutting blocks of fish on a bandsaw when the employee's left index finger contacted the blade, resulting in a fingertip amputation.",0
"An employee pulled into a driveway to deliver parcels that would not fit into a mailbox. The employee got out of their vehicle to retrieve parcels out of the back. As her back was turned, a dog came from behind and bit her right forearm and hand, removing a section of skin from the forearm. The employee was hospitalized.",1
An employee sustained an amputation to the left index finger while using a band saw.,0
"An employee was on a bridge carrying wood when he stepped on unsecured metal decking and fell approximately 30 feet to the ground below, striking his head.",1
An employee was setting the anchor for an ice-boom onboard a derrick boat. The employee cut a line that was holding the anchor chain and was then struck by a rigging chain. The employee sustained fractures to both bones in the lower right leg and a shoulder injury from falling overboard.,1
An employee was hospitalized with dehydration after experiencing heat cramps.,1
"An employee was standing next to a roller bed waiting for the next joist to come down. He reached to stop the joist and pull it over to him so he could tack the two ends. When he grabbed the end bar, it fell between two pieces of angle. The employee's left pinky finger was pinched between the two angles resulting in a partial amputation to the fingertip.",0
An employee was traveling down an aisle while operating a stand-up forklift when his lower left leg was caught between the forklift and racking. He sustained a laceration.,1
"While using a tire machine, an employee's left middle finger was amputated by the coupler and hydraulic mounting post.",0
"An employee was putting bottles on a pallet. A bottle broke, lacerating his left wrist.",1
"An employee was installing a metal panel when his finger was pinched between the housing unit and a 2x4 wooden board, resulting in a fingertip amputation.",0
"An employee was preparing food and filling hoppers with food. He opened an outdoor food hopper to add feed and was bitten on the left hand by a rattlesnake that was in the hopper, resulting in hospitalization.",1
An employee was stepping off a bundle of trusses onto the bed of a flatbed trailer. He fell off the flatbed trailer and struck the ground with his shoulder and head. The employee passed out from head trauma and was hospitalized.,1
"After lining up a cable roller stand with floor anchor holes, an employee was cleaning dirt out of a floor anchor hole. While doing this, another employee moved the cable roller stand to line up a different bolt hole and the injured employee's finger was pinched in a hole. The injured employee sustained a partial amputation and avulsion of the right index fingertip.",0
An employee installing insulation on the top of a treater shack fell approximately 8 feet from the top of the treater shack to the ground. The employee sustained fractured ribs and neck vertebrae.,1
"An employee was operating a cherry picker to place an appliance on a shelf. The employee fell from the cherry picker to the concrete floor of the warehouse and sustained a head injury, fractured collar bone, and a fractured shoulder.",1
"On September 6, 2019, an employee had finished installing gutters on a two-story residential home, when he began to feel ill. After arriving back at the warehouse, the employee began cramping up and was hospitalized with heat exhaustion.",1
An employee was pushing an engine block from one conveyor belt to another. The employee's left middle finger got caught in the rubber grate of the pallet the engine block was on; the tip was amputated.,0
An employee suffered heat exhaustion while performing an X-ray of a weld inside a new tank construction at a rural site.,1
An employee was capping bins while working from a ladder. The employee fell backwards off the ladder and landed on the ground. The employee was hospitalized with a brain bleed.,1
"An employee was operating a grinding machine (for tire manufacturing). The employee's hand was caught between rims on the machine, suffering finger amputation injuries.",1
"During unloading of a commercial water heater from a delivery truck, an employee's left index finger was pinched between a fork on the unloading vehicle and the top edge of the water heater. The left index finger was lacerated approximately 1 inch from the tip. A portion of the left index finger was surgically amputated.",0
An employee was using a band saw to cut neck bones when the blade caused an amputation to their right middle fingertip.,0
"While working on the warehouse floor, an employee was struck by a forklift and sustained a fractured right leg.",1
"An employee was travelling down a public road in a telehandler. When the employee pulled to the side of the paved road to allow vehicles to pass, the tires on one side went off the pavement and the telehandler rolled over. The employee sustained an amputated foot, broken legs, a broken pelvis, and a punctured lung.",1
An employee was testing the effectiveness of repairs to an extendable conveyor and was caught between the extendable conveyor and the front of a trailer when the extendable conveyor was activated. The employee sustained a swollen arm with internal bleeding.,1
An employee tripped over bins that parts were being sorted into and fell to the concrete floor. The employee suffered a broken left hip.,1
An employee was scanning placards on the city dock. A tug that was pulling three containers of mail came around to unload and the end of a container struck the injured employee. The employee was hospitalized.,1
"An employee was pushing a cart full of garments through a doorway. The employee then transitioned to the front of the cart to continue pulling it. As the walkway began to slope downwards, the cart caught the employee’s leg against a pallet of quick-dry cement. The employee was hospitalized with a broken tibia and fibula.",1
"An employee was pulling material with a pallet jack when she slipped and fell backwards, sustaining a broken right wrist and hip.",1
"On 9/06/2019, the injured employee was helping put a patient to bed with the help of two additional employees. The injured employee was knocked down by a patient, fell to the floor, and sustained a fractured hip.",1
An employee was using a digging bar to break rock that was preventing a trench box from fitting into an excavation. The tool caused a compound fracture to the employee's ring finger.,1
"While an employee was installing pipe casing, a shackle moved down and forwards, which caught the employee's middle finger on his gloved left hand. The employee sustained an amputation to the fingertip above the first knuckle.",1
An employee was welding a tension rod on the rear axle of a truck when the seal came loose and the tension cap struck the employee on the chest causing a laceration.,1
An employee was servicing trash containers in a residential neighborhood and experienced weakness in his legs. He was hospitalized with a heat illness.,1
An employee had been helping with plumbing work at a jobsite. The employee experienced cramping and was hospitalized with dehydration and heat exhaustion.,1
An employee was attempting to remove a vehicle seat from a conveyor transport pallet. The employee's right hand and glove were caught under the seat latching lever and they suffered an amputation to their right index finger.,0
An employee was clearing a jam when a cylinder activated and fractured their left ring finger.,1
"An employee was washing the oven room. When she turned on a heated water hose, her left leg was sprayed with 180-degree water causing second and third degree burns.",1
An employee had been working and later experienced severe cramping. The employee was hospitalized for dehydration.,1
An employee was fixing the layer wind of a covered cable on a wooden reel. The employee used his left hand to guide the cable onto the reel. The machine was activated while the employee's finger was under the cable that was under tension. The employee sustained a left middle finger amputation.,0
An employee slipped and fell to the ground while getting down from a work vehicle. The employee sustained two broken ribs and a ruptured spleen.,1
"On September 6, 2019, an employee was working as a keeper helper on the cast floor at the blast furnaces. This involved observing the filling of torpedo ladles, maintaining the iron run, and taking temperature and iron samples. After experiencing cramping, the employee was hospitalized with heat related illness.",1
"An employee was guiding a chiller head as it was being hoisted by a chain hoist. A strap that was used to hang the chain hoist snapped, causing the chain hoist and the chiller head to fall. As it was falling the chiller head hit a section of steam piping and veered off towards the employee, landing on the bridge of his right foot. Four metatarsals were each fractured in two places, requiring hospitalization.",1
"An employee slipped and fell to the floor in the bathroom, suffering bruising to the left hip.",1
"An employee was opening the trailer doors. The employee opened the right-side door. Then the employee opened the left side door, and product fell out, causing a gash on their head. The employee then fell and fractured a leg.",1
An employee was taking product from a drum and placing it on a chute that leads to the rework area. The employee's right hand made contact with a conveyor adjacent to the chute and became caught between the conveyor belt and the conveyor frame. The employee sustained the amputation of the right pinky fingertip.,0
"An employee was on his route delivering mail when he lost consciousness due to the heat and fell, striking his head on a mailbox. He was hospitalized.",1
An employee was dressing chickens and got their arm caught in the machine resulting in a open fracture to the arm requiring hospitalization.,1
An employee fell on flat ground and his left leg was run over by a telescoping forklift. He was hospitalized.,1
A third-party truck driver was getting ready to back up a semi-trailer as an employee came into the loading dock area. The employee was pinned between the semi-trailer and the dock plate. The employee sustained internal injuries and was hospitalized.,1
"On September 7, 2019, an employee was walking out of the lobby when he slipped on a rubber mat and fell to the floor. He hit his head, causing a deep laceration, and fractured his hip, requiring surgery.",1
"An employee was grinding the end of a 30-inch diameter, 40-foot long spiral steel pipe. The pipe was spinning and was set on fixed rotating wheels. The employee was in line with the V-roller line which brings pipe to the rotation station. The V-roller line engaged, sending a pipe in a south to north track. The employee was caught between the moving pipe and the pipe that was on the rotating wheels. The employee was hospitalized for an abrasion.",1
"On September 7, 2019, an employee was troubleshooting a conveyor belt when the conveyor belt started up, catching and injuring the employee's right hand between the drive and the belt.",1
An employee was positioning himself as a safety guide or wing walker to guide a departing aircraft and was struck by a van near the vehicle service road. The employee was hospitalized.,1
"A technician was in training, performing a check on the wheel abrator. He opened the door on the enclosed equipment to visually inspect and noticed debris at the bottom of the machine. He went to clean out the debris and his left middle and ring fingers made contact with the rotary blades resulting in amputation of the fingers and hospitalization.",1
"While performing maintenance on the tire shine machine, an employee sustained amputation of their left ring fingertip.",0
"An employee was hooking up a water hose. When he lifted his head, his head struck the window sill and he was hospitalized with a concussion.",1
"An employee had been conducting work on a scaffold. While descending on the outside of the scaffold, the employee fell approximately 15 feet to the ground. The employee sustained cuts to the face and a knee injury.",1
"An employee was putting tires onto storage racks. The employee slipped and grabbed a rack, trying to prevent a fall. His left pinky finger was caught by the rack and amputated to the first knuckle when he fell approximately six feet.",0
An employee pulled the pin of a steel dumpster door. The door then swung open and struck the employee in the head causing a head injury.,1
"While observing two other maintenance employees troubleshoot a skinning machine, the injured employee's hand was caught between the tooth rollers of the skinning machine. The injured employee sustained the amputation of four digits.",0
"An employee was checking the belts on a pumping unit. The unit came on, catching his thumb. The employee sustained the partial amputation of his left thumb.",0
"While coming out of a room, an employee slipped and fell sustaining torn knee muscles.",1
"An employee loading boxes into a case packer machine lost their footing. Upon slipping, the employee's thumb contacted a part of the machine causing a partial de-gloving of the right thumb that required hospitalization.",1
An employee was working as a floor hand in support of an oilfield operation. He became ill from heat stress and was hospitalized.,1
An employee working around the grain bunker was bitten by a snake.,1
A pedestrian door closed on an employee's finger resulting in amputation of the right ring fingertip.,1
"An employee was walking across the venue when she tripped on a crack/uneven area of pavement and fell to the concrete surface. She hit her head on the ground and sustained injuries including a contusion/laceration to the forehead above the right eye, shoulder and upper arm pain on the right side, and numbness of the left arm. She was hospitalized and required neck surgery.",1
"The injured employee was guiding the operator of a forklift which was lifting a 750-lbs. steel roll. As the forklift was backing out with the load, the steel roll slipped out of the slings and landed on the injured employee's foot. The composite toe cap in the boot clamped down crushing the employee's foot and resulting in toe amputations.",1
An employee was preparing to put out lane closure signs and equipment. He fell from a temporary platform and the arrow board trailer rolled over his left leg. He sustained a fractured left ankle.,1
"An employee was sorting cattle. A cow's horn got stuck in the pen gate; when she shook her head to free it, the horn punctured the employee's eye.",1
An employee was lifting a 5-gallon bucket of a fermentation enzyme named SZM XT-20+. The bucket tipped and the employee was splashed in the face and upper body by the chemical. The employee was hospitalized with decreased lung capacity due to an allergic reaction.,1
"An employee was attempting to dislodge a blockage from the transfer line. The steam was shut off, but pressure remained in the line. When the blockage was dislodged, hot resin (200 degrees Celsius) sprayed down into the drum and onto the employee's face and neck. The employee was hospitalized with burns to the face and neck.",1
"An employee was walking from the pack floor to the stuff floor to run a hose through a location so that he could perform a cleaning duty. While he was walking over the clean-in-place (CIP) tank, the grating broke and he fell in. His left leg was burned. The CIP process was being run at the time, so it contained hot water and chemicals.",1
"An employee was raking slag while standing on a platform. A plug in the boiler came loose causing water and slag to eject at high pressure and strike the employee. The employee was hospitalized with a laceration to the back, a compression fracture to vertebrae, and a brain hematoma.",1
"An employee was slicing onions with a vegetable slicer when the slicer cut his left index finger, resulting in a fingertip amputation.",0
"While loading a piece of metal into a shear, an employee's finger contacted the shear blade. The employee sustained a laceration to his index finger.",1
"A maintenance employee had just tightened a bolt. A second employee then put a wrench on it to check it. As the second employee was applying pressure to the wrench, a valve which controls the flow from the degreaser to the washer opened slightly. The injured employee was sprayed by 200-degree stock. He sustained third degree burns to both hands and second degree burns to his back.",1
An employee was directing traffic in a work zone when he was struck by a car. He was hospitalized with a head injury.,1
An employee was installing a pump to a mixer on a production line when he sustained an electrical shock.,1
"An employee was changing a filter at a hood above a prep cook surface. The filter dropped behind the equipment and damaged a gas line. Gas leaked and ignited. The employee sustained burns to the face, neck, and arm.",1
An employee was performing maintenance on a clean-in-place (CIP) machine when the tip of the employee's thumb was caught in a pinch point and amputated.,0
"An employee in the quality lab was pushing a chair back to her desk. Her feet got tangled in the chair and she fell to the floor, breaking both wrists and the left knee.",1
An employee was struck by the bucket of an excavator when the machine rotated. The employee sustained a broken right lower leg.,1
An employee was re-stacking boxes that had fallen. A double-stack of pallets that was behind the employee fell and landed on the employee resulting in a fractured right ankle.,1
An employee was using a band saw to cut meat when their index finger contacted the blade and was lacerated.,1
An employee was removing an aluminum casting from a basket after the heat treating process. The employee's left hand was caught between the lifting hook and the parts hook resulting in a partial amputation of the left pointer finger.,0
An employee was cutting onions with a knife when it slipped and cut her left middle finger.,1
A temporary employee was removing a tablet that did not properly eject from a press. The press cycled as the employee's left hand was in the point of operation causing the amputation of the left middle finger.,0
An employee was cutting a steel plate using a grinder equipped with a cut-off wheel. The cut-off wheel jammed in the material causing the grinder to kick back. The employee dropped the grinder. The employee was hit by the spinning cut-off wheel and sustained a laceration to the right shin area.,1
"At about 6:30 a.m., an employee slipped and fell down stairs, suffering multiple injuries including cracked ribs.",1
An employee's left middle finger was caught and amputated by a finishing line conveyor.,0
An employee became ill while working at her cubicle and was hospitalized due to mold exposure.,1
An employee was unloading a mail truck when the cable for the rear cargo door broke causing the door to fall on the employee's head. The employee sustained a cut and a concussion.,1
"While pulling electrical line using a tugger and tensioner, an employee came in contact with a live electric current and sustained burns to the left hand.",1
A nurse was assisting in lifting a patient from a stretcher to a wheel chair and suffered lower back pain. The employee was hospitalized.,1
"While climbing down a 32-foot fiberglass ladder, an employee fell approximately two stories to the ground and sustained fractures to the ribs, pelvis, and collar bone.",1
An employee was using a laser cutter to cut polyurethane when she felt sick and had difficulty breathing. She was hospitalized with carbon monoxide poisoning.,1
"On September 09, 2019, an employee was installing window wrap from a 40-foot extension ladder when he fell about 15 feet to the ground. He suffered fractures to his right shoulder blade, ring finger, and lower back and a laceration to the right side of his face. He was hospitalized. The ladder's feet were not properly positioned at the time of the incident.",1
An employee was using a wrench to loosen a nut to adjust the vibrating conveyor system of the alloy system hopper. The wrench came off the bolt and the employee fell 6-feet 10-inches. The employee struck their head and sustained lacerations requiring fifteen staples and hospitalization.,1
"While troubleshooting a light fixture, an employee sustained an electric shock and fell from a ladder.",1
"An employee was finishing the inspection of a crane. As he was getting off the crane, the employee slipped and fell to the ground and sustained a fractured pelvis.",1
"On September 10, 2019, an employee was walking into the hospital building when she fell. While catching herself, she fractured her right arm in two places. She was hospitalized.",1
An employee was unloading products from inside a truck trailer when he passed out in part due to the heat and hit his head on the ground. He was hospitalized.,1
An employee was shrink wrapping a skid when his left index fingertip was amputated by the cutter on the shrink wrap machine.,0
"While operating a machine, an employee's hand went into a pinch point and the thumb tip was amputated.",0
An employee was building the frame of a trailer. The trailer frame was lowered via hydraulics while the employee's finger was in a pinch point. The distal portion of his left fifth digit was amputated.,0
"While racking store fixtures, an employee was struck by a clothing rack that had become stuck in an overhead conveyor. The employee fell to the ground and was hospitalized with a fractured lower left leg.",1
An employee operating a motorized pallet jack was picking goods from the racking systems when they were struck by another pallet jack and sustained a broken leg.,1
Security officers were pursuing a suspect. An officer running on the concrete sidewalk fell and injured both knees.,1
An employee was retrieving tools from his tool bag when his finger was caught by the claw of a small hammer resulting in a fingertip amputation.,0
"An employee was placing clothing/hangers onto a moving screw conveyor. A hanger got caught in the screw conveyor, and as the employee was removing it, their left index finger got caught in the conveyor and the end of the finger was amputated.",0
An employee pushed a bar through rollers. The employee's gloved hand was then pulled into the rollers resulting in a thumb amputation.,0
"An employee was using a pallet jack to unload pallets from a truck. The dock plate rose up about 1 ft. when the employee entered the truck. While backing out, the employee's right foot was crushed between the dock plate and the pallet jack.",1
"An employee was climbing off of a roof where he had been installing a roof vent. While trying to step down onto the ladder, the employee fell to the ground and sustained broken ribs.",1
"An employee was power washing a farrowing crate when, as he stepped out of the crate, he slipped and lost control of the power washing gun. High-pressure water then hit and lacerated his right elbow and forearm.",1
"An employee turned off a conveyor belt to pull out a skid that had gotten stuck. While his hand was inside the machine, the machine was turned on again. The employee was hospitalized for injuries to his left hand which require surgery.",1
A maintenance employee was working on an exhaust fan on the roof of the dining hall. The employee's finger got caught between a belt and pulley and he sustained the amputation of the right index fingertip. The exhaust fan was turned off at the time.,0
"An employee had been putting trim onto a cart. The employee felt something in his safety boot and took the boot off to check for a foreign body. A trim cart then ran over his foot. He sustained an amputation, without bone loss, of the tip of a toe on the left foot.",0
"While building a truss, an employee's left hand was holding onto a wooden truss when a pneumatic clamp, designed to hold the sides of the truss in place during manufacturing, engaged and caused the partial amputation of the employee's left thumb tip.",0
An employee was using a chop saw to cut an aluminum gutter into smaller scrap pieces. The chop saw blade contacted his hand causing a cut that required surgery.,1
A temporary employee was carrying formwork jacks when his right thumb was caught and crushed between the jacks and a stack of crates.,1
"An employee was walking between tie-off points and fell through a roof opening to the concrete floor 23 feet below. The employee suffered broken ribs, a collapsed lung, a displaced left hip, a shattered left wrist, and a broken pelvis and was hospitalized.",1
"A maintenance employee was walking into the maintenance shop. He tripped while entering the shop and reached out to break his fall, striking his right hand on an axe which was stored near the door. His right ring finger and palm were cut on the axe blade.",1
An employee was climbing down a ladder. He was on the second rung when he felt his quadricep pull. He requiring hospitalization and surgery for a detached right quadricep muscle.,1
"An employee was pulling on a tree limb located on the ground using a 6-foot long hanger puller. When the hanger puller became dislodged from the limb, the employee tripped over an anchored guy wire directly behind him. The employee's momentum carried him approximately 6 feet further where he struck his left shoulder on a decorative concrete wall and then fell. The employee sustained fractures to the right fibula, ankle, and left shoulder.",1
"An employee was testing a 16-inch pipe with a test ball when the test ball flew out of the pipe causing the employee to fly back, landing on his right arm. The employee was hospitalized with a broken arm.",1
"An employee was cleaning out the parking garage fan room. The employee's hand was in the doorway when the exhaust fan turned on and pulled the door shut on the employee's left pinky finger, amputating the fingertip.",1
An employee was walking backwards while installing flashing on a roof. The employee fell approximately 15 feet from the roof and sustained a fractured left elbow and wrist. Fall protection was not worn at the time.,1
An employee sustained an electric shock on his right ring finger while troubleshooting a wind tower. He was hospitalized.,1
"A forklift was transporting two bales of aluminum, one on top of the other. The bottom bale gave way causing the top bale to roll onto an employee who was working on a piece of equipment. The injured employee sustained severe contusions to the pelvis.",1
"Two temporary employees cut a new window opening into metal siding on the second floor of a building. The employees then went to the first floor to install door and window frames. The injured employee went back up to the second floor to get a cordless drill and then heard the other employee call for something. When the injured employee went to the window opening to look down, the metal siding gave way. The injured employee fell 12 feet from the second floor, landing on the concrete pavement and broken roof tiles that were outside of the building fracturing his right elbow and hip.",1
"An employee was in the basement area looking at completed welding locations at the ceiling line. The employee fell approximately 20 feet from a concrete stair landing and sustained a broken leg, and possible spinal fractures.",1
"The injured employee was holding a valve that was being closed by another employee when his thumb entered the valve. As the other employee closed the valve, the ball of the valve sliced off the injured employee's thumb tip.",0
"An employee turned off the power to a chipper in order to change the blade. The employee then went to get tools. When he returned to the chipper, he checked to see if the blade had stopped spinning and his left ring finger became caught between the belt drive and sheave. He sustained a fingertip and fingernail amputation.",0
"On September 10, 2019, an employee was being trained on how to load and unload batteries from a motorized pallet jack's charger when the pallet jack hit and fractured his lower right leg. He was hospitalized.",1
An employee walked into a storage closet and fell into an uncovered crawl space. The light was off at the time.,1
An employee was participating in a live fire training exercise and began to feel lightheaded and dizzy. The employee was hospitalized due to low potassium.,1
An employee was working at a gut table when the employee experienced muscle cramps and heavy sweating due to possible heat exhaustion. The employee was hospitalized with a muscle injury.,1
"On 9/10/2019, an employee dismounted a forklift to move an object by hand. The forklift moved and pinched the employee between an object and the forklift. The forklift punctured the employee's leg, requiring hospitalization.",1
"An employee was operating a mower and his finger contacted the mower blade, resulting in a fingertip amputation.",0
"An employee sitting in an office chair went to stand up, twisted her ankle, and fell to the floor fracturing the right pelvis.",1
An employee was driving a forklift on an unpaved road. The forklift left the road and tipped over in a ditch. The employee's legs were pinned under the forklift and sustained bruising.,1
"An employee was torqueing bolts under a catwalk when a steel frame released, hitting the employee in the head and eye regions and fracturing bones.",1
An employee was descending an A-frame ladder when he slipped on the second or third rung and fell 2 to 3 feet to the concrete floor. The ladder fell on him and onto the floor. He sustained a compound fracture to his left ankle.,1
An employee was cleaning at an machine operator workstation when an unassociated hot water pipe failed and sprayed the employee. The employee suffered burns to the arm and torso.,1
"An employee had finished grinding a shaft on a lathe and turned the machine off. As he went to remove the shaft, a switch was contacted and turned the lathe on. The shaft on the lathe grabbed his glove wrapping it around the shaft and causing an amputation to the left index finger.",1
"An employee was inserting a die into CNC machining equipment when the die fell out onto the employee's finger, amputating it.",1
"An employee arrived at work about one hour before his shift started. While walking in the break room to get a cup of coffee, he tripped on a cart and fell. He sustained a broken hip and was hospitalized.",1
"On September 10, an employee was being trained on how to operate a motorized pallet jack and lost control of the vehicle. The pallet jack then hit and fractured his lower leg near the ankle.",1
"An employee was standing on a dunnage rack to reach pizza items on the top shelf in the freezer area. When the employee reached for the items, a bag of cheese opened and cheese scattered onto the floor. The employee stepped backward off the rack and then slipped on the cheese that was on the floor. He fell against the racks that were behind him and sustained a punctured lung, broken shoulder, and two broken ribs. He was hospitalized.",1
"While walking into an office, an employee entered the path of a forklift that was carrying metal siding. The forklift shifted, causing the siding to fall off the forklift and land on the employee's foot. He suffered toe lacerations. Steel-toed boots were worn at the time of the incident.",1
An employee was working outdoors performing waste collection activities on a residential route and suffered heat exhaustion.,1
A truck driver along with another employee had just finished draining a tanker. They were unhooking the hose from the tanker when hot liquid asphalt struck the driver's arm causing severe burns. The driver was hospitalized.,1
"An employee was using a crane to unload a windmill. As the employee was hooking a safety latch to the corner casting of a windmill, the vessel where the employee was working moved a little, creating tension on the hook. The employee's left ring finger was caught in the safety latch, fractured, and the fingertip was amputated without bone loss.",0
"An employee of Dreisilker was working as a field service technician, performing infrared testing for a customer. The employee was walking away while a third-party contractor employee was closing the door of a fuse box. An arc flash came from the fuse box and burned both employees, and they were both hospitalized. The Dreisilker employee sustained burns to the right hand, and on the left side of the neck, forearm and face.",1
"An employee was lifting a case of eight 1-gallon water jugs when the case fell on his right foot. Suffering from swelling (as well as what appeared to be an insect bite) on the foot, he was hospitalized.",1
"An employee was walking up a sloped gravel hill when he tripped and fell to the ground, resulting in a fracture to the right ankle.",1
"An employee was using a grommet machine to place a grommet in the holder. The machine activated and came down on the top of the employee's right index finger, causing an amputation.",0
An employee was moving a dresser out of a hotel room in order to refinish it. A metal rim on the bottom of the dresser cut the employee's hand and severed a tendon. The employee was hospitalized.,1
"An employee got off a pallet jack and was walking down an aisle to a pick location. The employee tripped over a box and fell, sustaining a fractured left femur.",1
"An employee was circulating bad oil into tanks. He then went to remove a leaking dump valve from a compressor to conduct repair. While the dump valve was being removed, fluids sprayed out and were ignited by the hot manifold of a compressor. The employee sustained second degree burns to the palms and top surface of both hands and was hospitalized.",1
An employee was electric shocked while plugging a warmer machine into an outlet.,1
An employee was hospitalized with a fractured fibula after their leg was caught between a dock and a delivery truck.,1
"A temporary employee was teaching an employee how to clean rollers in the pouring and debridge area of the facility. When they were done cleaning the roller, the employee placed it back into the lathe and used a chuck key to tighten it into place. The temporary employee instructed the other employee to turn on the lathe. As the lathe was being turned on, the temporary employee saw the key was still in the chuck and went to remove it. The employee's finger got caught between the key and the guard resulting in amputation of the left index fingertip.",0
"An employee was using a pocket knife to cut a plastic zip tie when the knife slipped and lacerated his wrist, requiring hospitalization.",1
"An employee was driving a forklift onto a trailer when the forklift turned over sideways and he hit his head on the inside wall of the forklift's cabin. He suffered a skull fracture and a hematoma, requiring hospitalization.",1
"An employee was unloading supplies in the back of a delivery box truck when his foot was caught on a pallet and he fell, breaking his pelvis.",1
"While standing on the sixth step of a 10-foot step ladder, an employee was adjusting a conveyor belt using a pry bar. He fell to the floor and broke both wrists.",1
"An employee was holding a door open when the door automatically closed, catching his hand and causing a partial amputation to the right middle finger.",0
"While throwing roofing material from the roof into a dumpster on ground level, an employee fell approximately 18 feet from the roof to the ground. The employee sustained a fractured vertebra and a punctured lung.",1
"While checking the meter voltage on a rail, an employee experienced an electric shock to the right hand.",1
"An employee fell to the ground after interacting with a fellow employee, fracturing the left ulna and requiring hospitalization.",1
"An employee was holding the vertical support of a racking system while it was being anchored into the floor when the support fell, striking the employee in the head, back, and left leg.",1
"While driving a powered pallet jack, an employee's left foot was caught between the pallet jack and a metal guard. The employee sustained an amputation to the left leg just above the ankle.",1
"An employee was climbing a ladder, fell to the ground, and was hospitalized with a back injury.",1
A shear machine amputated an employee's right middle fingertip (with no bone loss).,0
An employee was shaping pieces of material on the table shaper. He then turned the machine off to clean it. The employee's hand contacted the tool while it was still in motion. The employee sustained amputations to the index and middle fingers without bone loss.,1
"An employee was filling a water pump with gas when the gas vapors ignited. The flames contacted the employee, causing first and second degree burns to the employee's hand, arm, face, and stomach.",1
"An employee's right middle finger was trapped in a closing office door, resulting in a fingertip amputation.",0
"An employee was performing a routine walkthrough of a boiler room. As the employee passed a contractor removing a steam-line pump, a neoprene seal ruptured, causing a chemical release onto the employee. The employee suffered chemical burns and eye irritation.",1
"An employee was delivering supplies at a construction job site. As a customer was taking rebar from the back of the employee's trailer, the rebar began falling off of the trailer. It struck the employee's right leg and landed on his ankle and foot, breaking two bones in the foot. The employee was hospitalized.",1
An employee was conducting repairs in an MRI room when he made contact with a live electrical wire and suffered a severe electrical shock.,1
"An employee was climbing down a ladder when he was attacked by a swarm of bees. He fell to the concrete below, suffering a fractured elbow and leg, a broken nose, and the loss of some teeth.",1
"On September 11, 2019, at approximately 2:30 PM, an employee lost his balance and fell off an A-frame ladder while cleaning a wall inside an empty grain bin. The employee was hospitalized with fractures to both heels.",1
"Three employees were disassembling a lattice boom crane. One of the employees took a pin out of the crane by hitting it with a sledgehammer. A section of the boom then struck the employee on his right side, fracturing his clavicle, ribs, and femur.",1
An employee became ill and was hospitalized due to heat stress while working on a molten aluminum production of sows.,1
"An employee was fusing a pipe into a fusion machine when his finger was caught in the clamping mechanism of the machine, resulting in a right middle finger amputation.",0
"An employee was using a ratchet to tighten banding on a cart. The ratchet slipped and struck the employee's left cheek and eye area, causing facial fractures and lacerations above and below the eye.",1
"An employee was installing purlins while tied off to a truss on a new construction commercial building. The truss rolled over and the employee fell approximately 16 feet to the ground, suffering broken vertebrae.",1
"An employee was using a nibble saw to cut a pallet when his glove became caught in the nibbler saw, resulting an amputation of his right thumb tip and nail.",0
An employee suffered severe leg and abdominal muscle cramps and was hospitalized due to heat stress.,1
An employee was descending from a crane boom due to incoming rain when lightning struck the crane boom. The employee sustained burns to the feet.,1
An employee was installing attic insulation when he sustained heat stroke. The employee was hospitalized and treated for dehydration.,1
An employee was performing maintenance on a cucumber header when the machine activated and damaged a muscle in the employee's leg.,1
An employee was closing a gate when a gust of wind knocked the gate off the track. The gate struck and fractured the employee's hip.,1
An employee was loading a skidder onto a trailer. The D-ring used to attach the strap that retained the trailer snapped forward and crushed the employee's left index fingertip. The fingertip required surgical amputation.,0
"An employee was inspecting a thigh machine in a deboning department. The employee fell forward while walking between two machines, and part of one of the machines amputated the tip of the employee's finger.",0
"While leaving a building, an employee fell down a stairway and suffered injuries to the left and right ankles.",1
An employee fell while walking on the concrete floor in a parking lot. The employee was hospitalized with a leg injury.,1
"An employee was scanning freight from a forklift. His hand was through the forklift mast when the mast was lowered, amputating his left index finger and requiring surgery.",1
"An employee was operating the controls of a combo dumper. When the dumper was raised, it pinched his right little finger against the rail, causing the amputation of the finger.",0
"After emptying shredded paper from the box of a truck, an employee was preparing to make an adjustment to the tensioning and position of the conveyor belt in the box. The conveyor then injured his forearm, requiring hospitalization and surgery.",1
"An employee tripped and fell over boxes while stocking in a dry produce area, breaking the left hip.",1
"An employee slipped on a rung while descending a ladder, falling approximately 10 feet and breaking his left femur.",1
"An employee had completed his route of delivering beverages when he became ill, requiring hospitalization for heat exhaustion.",1
"An employee was doing maintenance on a wall-mounted exhaust fan. The metal fan blade struck the employee, lacerating the employee's right elbow.",1
"An employee was called to restrain a patient. After physical contact with the patient, the employee experienced a sore arm and lightheadedness.",1
"An employee was using the entry door into the facility when the door closed on his pinky finger, resulting in a fingertip amputation.",0
"An employee was removing water from a cleaning bay with a portable electric pump. An explosion occurred when the pump ignited flammable vapors, causing burns to the employee's chest.",1
"An employee was struck by a moving vehicle while setting up road patterns. The employee suffered a crushed right ankle, broken right collarbone and a concussion.",1
"An employee ran into a cabbage tree while driving a UTV, injuring his right knee and lower leg. He was hospitalized.",1
An employee was operating a chop saw when it amputated his middle fingertip.,0
An employee fell from a baker's scaffold.,1
"A lineman was trying to change out a recloser when hot hydraulic fluid splashed on his arm and back, causing second-degree burns.",1
"Employees were rigging up a work-over rig. One of the rig wires caught on a 1-inch ball valve and the pressure from the rig rising caused the valve to be sent up as a projectile. It struck an employee on the right side of the face and forehead, fracturing his skull. He was hospitalized.",1
An employee was operating a portable saw to cut a pipe when the saw amputated two of his fingers.,0
"An employee became dizzy while planting sugar cane and was hospitalized, suffering from heat stress.",1
"An employee was removing a 6-foot section of duct when the duct rolled off the support bracket and onto his right leg, fracturing it.",1
"On September 11, 2019, at approximately 10:30 a.m., an employee was dumping a rolling tub of scrap bags when the employee noticed several individual scrap bags remained in the bottom of the scrap tub. The employee reached into the tub to remove the remaining bags. As the employee pushed on the corner of the tub to provide leverage to raise up the scrap tub, the scrap tub tipped sideways, causing the employee to lose balance and fall to the ground. The employee was hospitalized with a right hip fracture.",1
"An employee was standing on the floor of a drilling rig while hooking up a Kelly hose to a pipe. The hose struck him below the left shoulder blade, and he rolled off the rig and fell to the ground. He suffered kidney trauma, broken ribs, and a liver laceration.",1
"An employee was operating a bagging machine on the production line. When she changed the bags,  her finger was caught in the jaw assembly and her left index fingertip was amputated.",0
"An employee was entering a cafeteria. A nursing care resident was in the doorway and the employee tripped on one of the resident's wheels, falling to the ground and suffering a broken right hip.",1
An employee was under training for clamp truck operation. The employee turned and tried to stop the vehicle. He moved his leg out and was caught between the clamp truck and a yellow fence. He was hospitalized and had surgery.,1
"An employee was servicing a compression unit. When he began to shut the unit down, a flash fire occurred. He suffered primarily first- and second-degree burns. He was hospitalized.",1
"An employee was tied to the bucket of a boom truck and cutting the branch of a pine tree when the branch started to fall. The employee attempted to grab the branch and contacted the saw, cutting his right hand/wrist above the thumb area. He was hospitalized. The chain saw was still running at the time of the incident.",1
"An employee was installing rafters on a new farm building when he lost his footing and slipped, falling onto the rafter he was working on. The impact against the rafter ruptured his large intestine. He was hospitalized.",1
"An employee was using a manual guillotine cutter to cut plastic tags and cut their left thumb, resulting in a thumb tip amputation.",0
An employee was trying to uncouple an attachment from an excavator when his left middle finger was pinched in the coupler.,0
"An employee was trying to connect a beam to a column when the employee fell 14.5 feet onto concrete, suffering a fractured orbital socket and contusions on the face and nose. The employee was hospitalized.",1
An employee was working an overtime shift on top of a battery area when the employee became ill due to heat and dehydration. The employee was hospitalized for acute kidney failure and dehydration.,1
"Employees were performing maintenance on a boom lift. While they were disassembling the boom, a piece of the boom fell down and pinned an employee's hand between the boom and a machine, resulting in the amputation of the employee's finger.",0
"An employee was bitten by an unknown bug while moving fixtures and products for merchandise setting, requiring hospitalization.",1
"An employee was walking across a board during a team building activity at the company retreat when the board slipped or turned, causing the employee to fall to the ground. She suffered a fracture below the right kneecap (tibia plateau), requiring hospitalization.",1
An employee was replacing/fixing wiring on a light pole while in a bucket truck when the employee received electrical burns to the face and body.,1
"An employee bent down to grab a dock plate. The employee's right foot became tangled in a door strap and the employee fell backwards to the concrete floor, suffering a broken left wrist. The employee was hospitalized and underwent surgery.",1
"An employee was setting up jack stands for a section of pipe to rest on when a contractor on site turned on a concrete pump hose that moved the jack stand out of position. The employee attempted to set up the jack stand again while a section of pipe was being positioned on it. His right middle finger was caught between the jack stand and the section of pipe, resulting in a finger amputation from the first knuckle behind the nail.",0
"An employee was measuring a ductile iron pipe with another employee. The pipe was on the ground on top of 2x4's and was previously cut at one end, which was sharp. When they tried to move the pipe, it rolled, pinning the employee against the tire of a loader and lacerating his right knee. He was hospitalized.",1
"An employee was walking down a hallway when a scrubber machine struck her, causing her to fall over a pallet and break both ankles.",1
An employee was loading steel beams when the load shifted and the steel landed on his legs and ankle. He suffered broken legs.,1
"An employee was installing ground anchors for a fence when the employee struck an unmarked electrical line, suffering an electric shock.",1
"An employee was cutting pieces of metal on a shear. The employee's hand was under the hold-down when it actuated, crushing the employee's left thumb and resulting in a partial left thumb amputation.",0
"An employee was hooking up cargo to a crane hook for discharge from a vessel. The ship moved, causing the cargo (rubber in a metal basket) to strike the employee, who suffered a broken left hip and was hospitalized.",1
"An employee was operating a shear machine. While he was picking up a piece of metal, it slipped through his fingers and amputated the third and fourth fingers on his left hand.",0
An employee fell from the second rung of a fixed ladder on a feed bin. The employee landed on the ground and suffered a back injury.,1
"An employee fell to the floor while climbing a fixed ladder, suffering a cranial hemorrhage, broken ribs, and a broken back.",1
"A maintenance employee was operating a powered piece of equipment to clear a drain in a concrete floor when the glove on the employee's left hand became caught in the equipment's cable. The employee's left hand was then pulled into the apparatus in the drain, resulting in a partial left ring finger amputation.",1
"An employee was lifting and dumping a tilt cart (with a helper) into a roll-off dumpster at a loading dock. The cart tipped downward suddenly from the shift in contents and the employee's pinky finger was caught in a pinch point between the tipped cart and the jagged edge of the roll-off dumpster. As a result, the employee's right pinky finger was amputated.",0
An employee was attempting to hook a dolly to a tug by hand when the dolly rolled over the employee's foot.,1
An employee was raising a trailer gate. The employee's left little fingertip was caught between the gate and the trailer's side wall; the fingertip was amputated.,0
"An employee was stocking drywall and using a cart to move the drywall. The ground was uneven, and the drywall cart became stuck (15 sheets of 4x12) and fell over. The employee tried to get out of the way, but the cart pinned him against a beam and hit him on the upper thigh, breaking his left leg.",1
"An employee was removing a beam from a blaster and manually turning it to remove a steel shot when the beam rolled onto his hand, resulting in a left ring finger amputation.",0
"An employee was running to a customer service window when he fell to the floor, breaking his femur.",1
"An employee was on a scissor lift at 30 feet when the lift hydraulics failed and the lift suddenly went straight down. As a result, the employee broke both ankles.",1
"While adjusting material on a delivery truck's flatbed trailer, an employee fell from the trailer to the ground. The employee suffered a broken hip, broken ribs, and cranial bleeding.",1
An employee was scuffing the bottom of a dump truck bed while standing on the truck's frame when the employee slipped and fell approximately 4 feet to the concrete floor below. The employee was hospitalized with four broken ribs on the right side.,1
An employee was working on a poly-bag cutting machine when the machine amputated the employee's left ring fingertip.,0
"An employee was using a deboning saw to debone a poultry thigh when the employee's left index finger contacted the rotating saw blade, resulting in an amputation to the extreme end of the left index finger. Protective gloves were not worn at the time of the incident.",0
"Two employees were changing an expansion valve on an outdoor chiller unit. One employee was using a canister torch to sweat the piping and valve while the other was pulling on the pipe with a pair of pliers. When the connection came loose, excess fluid inside of the valve was ignited by the torch and splashed onto the employee with the torch. The employee suffered second-degree burns from the right side of the face down to the right side of the waist.",1
"While an employee was making an adjustment on the rivet squeezers, the machine actuated and caused an amputation of the right thumb proximal to the nail bed.",0
"An employee was collecting trash while a co-worker was using a winch to remove trash from the truck. The employee's hand became stuck in a pinch point between the winch and the truck, injuring his right index finger and resulting in a partial finger amputation.",1
"Inside a building being renovated, an employee was working from a 12-foot A-frame stepladder while using a grinder to remove an air duct when the air duct swung down and struck the ladder. This caused the employee to fall to the concrete floor below, suffering a broken left pelvis/hip, left arm bone chip, and a cut above left eye.",1
An employee was on a 7-foot scaffold pumping concrete when the hose became plugged and started whipping around. The hose hit the employee and he fell 7 feet from the scaffold. He was hospitalized with fractures to his pelvis.,1
An employee was dismantling a personnel and material hoist when the top portion of the motor pack fell over and onto the employee. The employee suffered broken ribs.,1
"On 9/12/2019, at approximately 11:30 AM, an employee was carrying a piece of drywall from a stock pile to hand to an installer on a scissor lift. As the installer was lowering the lift, the employee's right ring finger was pinched and crushed between the lift and the piece of drywall, resulting in a finger amputation.",0
An employee was leaving a delivery truck when his wedding ring caught on the back of the truck.  His left ring finger was amputated.,1
An employee fell from a trailer and suffered a broken leg.,1
"An employee was reaching into a packaging machine when the sensors activated and the machine cycled, amputating his index fingertip.",0
An employee was operating a forklift and slid into a barrier. The employee sustained a left knee fracture.,1
An employee was standing at the rear of his delivery truck when he was struck by an automobile. The employee sustained multiple fractures to the body and was hospitalized.,1
"While an employee was working on machinery, a sprocket caused the amputation of the employee's right little fingertip at the nail.",1
"An employee was performing maintenance on a TCU that was overheating when the TCU blew up. The employee received burns to the face, arm, hands, back of the neck, and hip.",1
"An employee was working on a roof approximately 20 feet high when the employee walked backwards and fell off the edge to the ground, suffering a skull fracture and contusion that required stitches.",1
"An employee was conducting a quality check on a pile being driven into the ground and was struck by a rolling pipe weighing 7,000 lbs. The employee sustained leg fractures.",1
An employee was operating a standup forklift in reverse after placing a skid of material on the storage rack. The forklift struck a boom attachment that was stored in the area and the boom struck the employee's left leg causing a compound fracture to the lower leg.,1
"An employee fell off a roof during roofing work, suffering a broken right hip, broken right elbow, and broken right ribs.",1
"On September 13, 2019, an employee was pruning branches when the tie-in point for the rope broke. The employee fell 18 feet to the ground, fracturing a vertebra in his back.",1
"An employee was delivering materials to a job site when a block of foam forms fell and struck the employee, causing a neck injury.",1
An employee was using a circular saw to cut wood stakes when the saw amputated the tip of their left thumb.,0
"On September 13, 2019, an employee was cutting a zip tie when the knife lacerated his wrist.",1
An employee was assisting in a test of a new pan line that was being installed when he was struck by a pan on the line and sustained a broken right hand.,1
An employee was preparing meat logs to be placed in the meat slicer. The employee's hand slipped down while the meat slicer was in operation and the blade caused an amputation to the left middle finger.,0
"When an employee was mounting a tire onto a wheel, the wheel came out of the tire and struck the employee in the shoulder. The employee was hospitalized with a broken clavicle and required surgery.",1
"An employee was cleaning out a hose leading to a tank. When a steam line was connected to the hose, the hose whipped around and released steam, which burned the employee's left arm and chest. He was hospitalized.",1
"An employee fell to the floor while cleaning, suffering an arm sprain and head laceration.",1
"An employee twisted his ankle while going down stairs. When he sat down to rest, he lost consciousness, fell off the chair, and hit his head on the ground, suffering a head injury.",1
"An employee was using a push mower to mow grass. As he was lowering the blades, the mower amputated part of his left middle finger and lacerated his left ring finger.",0
"An employee was walking to open the park when she lost her balance, stepped backwards, and tripped on a curb, falling to the ground and injuring her back. She was hospitalized.",1
An employee fell from concrete formwork to the ground and was hospitalized with a fractured pelvis.,1
"An employee was moving a water box (weighing 160 pounds) and trying to adjust it on a pallet to get it ready for shipping. The injured employee was on the other side of the box trying to move it when her left index finger was caught in between the edge of the water box and the plank on the pallet, resulting in a fingertip amputation.",0
"On September 13, 2019, at approximately 8:36 AM, an employee was repairing a door hinge on a bus that was in for service. The employee bent over and a foreign body struck their left eye. The employee was hospitalized.",1
"An employee was trying to separate two wheel wells with a chisel and a mallet. The wheel wells came back and struck the employee's finger, causing a split finger and an amputation.",0
"Two employees were operating the slitter machine and hydraulic table on Line 1. Employee 1 was operating the controls while Employee 2 was using a wooden stick to pick up the ends of sheet metal coming from the slitter head to set them on the hydraulic table. As the hydraulic table moved towards the slitter head, Employee 2 was caught in between the slitter machine and the hydraulic table. Employee 2 was hospitalized for a contusion and crushed chest wall, liver lacerations and bruised kidneys.",1
An employee was trying to clear a meat grinder. The grinder amputated 1/8-inch of the employee's right index fingertip.,1
"While walking across a warehouse, an employee tripped over a staged pallet and fell to the concrete floor. The employee suffered a leg injury.",1
"Am employee tripped on the edge of the concrete floor (where the gravel drive meets the building floor) and fell to the floor level, suffering a contusion and traumatic hematoma to the right knee.",1
"On September 13, 2019, at 9:50 A.M., an employee was disconnecting a hose from an asphaltic cement tanker when hot asphaltic cement material contacted and burned his hands, arms, and knees. The tanker valve was not closed at the time of the incident.",1
"An employee suffered a degloving of the little finger, which resulted in the amputation of the finger.",0
An employee fainted while installing a door at a construction site and fell to the concrete floor. The employee was hospitalized due to dehydration and a fractured first metatarsal on the right ring finger.,1
"On September 13, 2019, at approximately 10:10 p.m., the injured employee offered to help a second employee load three pieces of 20-foot angle onto a trailer using an overhead crane. During the lift, two of the angles became stuck together. The injured employee asked the second employee to further raise the south hoist. As the second employee lifted the angle, the injured employee attempted to release the raised angle from the adjacent angle. When the angles released, the angle being raised released from the chain on the south end. The south end of the raised angle fell to the ground and struck the adjacent angle, which in turn struck the injured employee on his right calf. He was hospitalized with a contusion/compartment syndrome to his right calf.",1
"An employee was trimming a tree while attached to a crane when the employee's fall protection harness broke. The employee fell approximately 50 feet to the ground, sustaining injuries to the back, ankle, ribs, and sternum.",1
An employee was stung by a bee while throwing trash into a dumpster and had an allergic reaction.,1
"An employee walked through an open loading bay door and fell 5 feet from the loading dock to the ground, breaking his femur. He was hospitalized.",1
"An employee was working with an edger when a board became stuck. While the saw was still running, the board that was jammed spun out of the edger chamber and struck the employee in the right arm resulting in a fractured radius and ulna.",1
A security officer was punched by a hospital patient and fell to the ground resulting in a skull fracture.,1
An employee was walking backwards while pulling a piece of steel when the employee slipped on plywood and fell backwards. The employee was hospitalized with a fracture to the T-12 vertebra.,1
"An employee was using a bandsaw when the blade severely lacerated his right index finger, requiring hospitalization and surgery.",1
"An employee was feeding debris into a trimming machine. The trimmer caught his right hand, lacerating the hand/fingers.",1
An employee was electrocuted while using a chipping hammer.,1
"A maintenance employee changed the knives on the hog barrel while the machine was locked out. After installing the new knives, the employee had to spin the barrel to ensure the knives did not hit the machine. As the barrel was spinning, his left hand was struck by a knife. The employee was hospitalized and required surgery on his left thumb.",1
An employee was guiding a crane as it lifted gravel onto a roof in its clamshell bucket. The employee's hand was caught and crushed in the bucket.,1
An employee was filling a wheelbarrow with sand at a blast furnace when the employee became lightheaded. The employee was hospitalized for dehydration.,1
An employee slipped and fell to the ground while walking in a parking lot resulting in a possible shoulder injury. It was raining at the time of the incident.,1
An employee had been performing their regular duties as a sales representative which include talking with customers outside and showing RVs. She suffered heat stroke.,1
"An employee was directing a rear-discharge ready-mix concrete truck that was reversing so its discharge chute could reach the receiving hopper located at the rear of a stationary pump truck. As the employee was adjusting the chute on the concrete ready-mix truck, the ready-mix truck rolled forward, then backed up, pinning the employee between a pipe connected to the pump truck hopper and the ready-mix truck's DOT bumper. The employee sustained a leg hematoma that required surgery.",1
"An employee struck a mezzanine while operating a lift truck, suffering a fractured femur.",1
"An employee was cutting meat with a meat saw when the employee's left hand contacted the sawblade, sustaining a cut, broken bone, and severed tendon.",1
"An employee was descending a 24-foot extension ladder after attaching an aerial service wire to a home. His left foot slipped on the second rung from the bottom, causing him to fall and land awkwardly. He broke his left foot.",1
"The sole of an employee's shoe stuck to the floor. She lost her balance and fell; her left knee, right arm, and shoulder struck the floor and she suffered fractures to the left patella and right humerus. She was hospitalized.",1
An employee was unloading pipes from a truck trailer when he tripped over a screw that was sticking up on the trailer and fell approximately 3.5 feet from the trailer to the ground. He sustained a right hip injury.,1
"An employee was in a warehouse that had three 6-foot high tiers of tires stacked on top of each other. The employee had climbed on top of a picker, stepped on the second tier tires, and was reaching for the third tier when the tire he was standing on slipped. The employee and tire then fell to the concrete floor, breaking his foot and toe.",1
An employee was cleaning up bolts at a jobsite when the employee's legs began cramping. The employee was hospitalized for dehydration.,1
An employee was operating a powered pallet jack and ran into a forklift being driven by another employee. The employee suffered a fractured left ankle.,1
"An employee was driving a forklift truck. The truck slid toward a guardrail, and the employee's left foot was caught and injured between the forklift and the rail.",1
"An employee was on a ladder attempting to remove tree limbs from the top of a truck when a tree limb fell and hit the ladder, causing the employee to fall to the ground. The employee was hospitalized with fractured ribs.",1
"An employee was bitten by a spider while driving a vehicle, requiring hospitalization for an infection.",1
An employee was using slip-joint pliers to clear a jam in a cutter machine's hoppers when the cutter partially amputated the employee's right middle fingertip.,0
"An employee was walking away from a table in the restaurant when she stumbled and fell, hitting her hip on the floor. She suffered a fractured hip and shoulder injury, requiring hospitalization.",1
"An employee was delivering plywood panels at a site when he slipped on a piece of cardboard and fell, breaking his left ankle.",1
"An employee working as a coating press operator noticed that the starch silo had jammed and was attempting to clear the jam. When the jammed starch cleared, the auger actuated and contacted the employee's hand. The employee sustained a partial amputation to the right index finger, just below the first knuckle.",0
An employee heard a noise in a machine he was working on. He made a repair and had another employee turn the machine back on. His hand was inside the machine and his right index finger was caught and severely damaged in a mechanism in the panel. He was hospitalized and had surgery. The machine was unguarded at the time of the incident.,1
"An employee was cleaning around a machine when he noticed a loose cover. As he was tightening the screw on the panel, it arced and caused burns to both his hands.",1
"On September 16, 2019, an employee fell approximately 10 feet to the concrete floor while attempting to access an extension ladder from a barrel vault standing seam roof. The employee's shoulder and pelvis were fractured.",1
"An employee was taking an LP tank to the refill station when a propane flash fire suddenly occurred, causing second degree burns to the employee's hands and face.",1
"An employee was driving a golf cart on a tarmac when she made a sharp turn and fell out of the cart, breaking both ankles.",1
"An employee was in a truck picking up trash at a residential site. When he exited the truck to pick up the trash, the truck rolled back and pinned him against another vehicle. He was hospitalized with a broken right leg. The truck was not in neutral at the time of the incident.",1
An employee was adjusting the height of a hydraulic press table to insert the positioning pin when the hydraulic press came down and crushed the employee's hand between the pin and press table. The employee suffered a fractured left hand requiring surgery and hospitalization.,1
A public safety officer was de-escalating a fight between family members in a NICU waiting room when the employee was punched in the face. The officer was hospitalized with a broken nose.,1
"An employee was unloading metal racks containing chicks using a hook and winch system. His left hand was caught between a rack and a hook, and his middle and index fingers were lacerated.",1
An employee was shocked while changing out a motor on an offline washer. The employee was hospitalized.,1
"An employee was performing maintenance on a photo tool. Afterward, he added refrigerant to the tool, which began to leak. He attempted to stop the leak and contacted the refrigerant, burning both of his hands.",1
An employee was performing preventive maintenance and was removing built-up grease from a moving chain when his right index fingertip was amputated.,0
An employee was walking beside a cart when it caught her feet. She tripped and her left arm was broken.,1
"On September 16, 2019, an employee was operating a telehandler when it went off the road onto its side. The employee suffered several face and head injuries.",1
"An employee was working on a single point vinyl welder when he turned to talk to another employee. His hand was placed on the top plate of the press welder at the time. When the welder finished its cycle, it came up and trapped his right pointer finger between the top plate and top of the welder. He pulled his gloved finger out and suffered a fingertip amputation.",0
"While an employee was adjusting a chain on a machine, the chain caused an amputation to the employee's right index finger.",0
"An employee was dismantling a temporary tower when a swivel hook appeared to shear, dropping a section of the steel tower 10 feet. The section hit the employee, who sustained a fractured sternum.",1
"The injured employee was holding a long, metal, hollow pole out of the way inside a truck container while a second employee was operating a forklift to load the container. The forklift mast struck the injured employee's hand pushing his hand into the end of the pole and amputating the thumb.",1
"An employee was refueling a water pump when the gasoline began to overflow out of the fuel tanks. It spilled on both the exhaust and the employee, then ignited, burning the backs of the employee's legs above the knees.",1
"An employee was holding a stake to be driven into the ground by another employee when the employee was struck on the hand with a sledgehammer, suffering a fingertip laceration.",1
An employee fell from a belt loader as he was securing cargo bin netting. The employee was hospitalized with a fractured elbow and hip.,1
"An employee was making adjustments at the back of a machine. When the machine operator started the machine, the employee's thumb was under a chain on the machine and was smashed, resulting in the amputation of the left thumb tip.",0
An employee was bitten on the leg by a rattlesnake while walking in the pasture.,1
"An employee was putting a wood crate together with a pneumatic stapler. The staple gun came into contact with his thigh and went off, embedding a 2-inch staple in his leg between the knee and the thigh.",1
An employee was on a ladder when a wasp attacked him. He fell backward from the ladder and suffered broken ribs and an abdominal injury.,1
"An employee was attempting to remove a panel cover on a cable tray while working from an 8-foot stepladder when he felt the ladder shift and lost his balance. He jumped off the ladder and hit the floor, suffering two broken ribs, two cracked vertebrae, a fractured wrist, and a concussion. He also required stitches above his right eye.",1
"While clearing a parts jam on a buckle base machine, an employee's finger was caught and lacerated in the probe.",1
"An employee was hooking the trailer to a pickup truck. Some of the weight of the trailer came down on the employee's left index finger, crushing it against the hitch ball. The fingertip was amputated.",0
"An employee was coming down a wireline truck ladder. As he stepped down, his ankle rolled and he fell to the ground. He landed on and broke his right femur, and was hospitalized.",1
"An employee was showing fire department first responders the entrance to a building when the building exploded. The propane explosion injured the employee's head and leg, also causing second- and third-degree burns on 85% of the employee's body. The employee was hospitalized.",1
"An employee fell from a sidewalk/curb to the ground. She suffered wrist, knee, and ankle injuries and was hospitalized, requiring surgery.",1
"An employee had been carrying mail on a city route that included driving and walking. After work, the employee had a cardiac event associated with exposure to heat, and was hospitalized.",1
An employee was operating a power jack. As he was walking backwards he was caught between his power jack and another stationary power jack. The power jack he was operating rolled over his right foot causing a laceration and multiple fractures.,1
An employee was helping another employee pull a lawnmower out of a ditch using a tractor. The tractor went into gear and knocked the employee off the tractor. The tractor then ran over the employee's leg and face causing injuries.,1
"An employee removed or loosened the coil spring of an overhead garage door and was struck by the assembly, suffering a fractured arm.",1
"An employee was unloading a large cylindrical metal filter housing from a pallet onto the floor to be cleaned when he dropped the assembly on his foot, causing a hairline fracture to his right toe.",1
"On 9/16/2019, at approximately 0945 hours, a border patrol agent was on a horse working traffic when the agent spotted a group running. The agent was riding to the area when the horse started bucking. The agent was attempting to gain control of the horse as it headed straight for a fence and into a metal H-brace. The agent's right leg struck the H-brace, suffering a broken femur.",1
"An employee was helping to move a piece of equipment when it slid off a cross beam. His finger was then caught between the floor and the equipment, stripping the meat from the bone. As a result, his left middle finger had to be surgically amputated at the first joint.",1
"An employee was strapping walls to a flatbed trailer when the employee stepped off the end of the trailer and fell approximately 3.5 feet to the ground, suffering a fractured skull, broken ribs, and bleeding on the brain.",1
An employee was attempting to retrieve material from a plate saw when the employee's fingers touched a moving blade. Two of the employee's fingers were lacerated.,1
"An employee was picking trash and throwing it out over a balcony railing when the railing gave out. The employee and the railing fell approximately 20 feet to the ground. He fractured his right wrist, forearm, and leg.",1
"An employee was standing on top of a container while a spreader bar was being lowered. The bar swung forward, causing the employee to step back and fall approximately 9 feet off of the container and onto the dock. He broke his wrist and suffered a damaged vertebra.",1
"An employee was attempting to unjam a saw when his left hand touched the rotating blade, lacerating his hand and little finger. As a result, his little finger had to be medically amputated.",0
An employee was pulling tubing at a well site when an object fell off the derrick and punctured the employee's leg.,1
"An employee was stripping the floor with chemicals when the stripper chemicals spilled on his foot, causing chemical burns that required hospitalization.",1
"An employee's right hand contacted a moving band saw blade, resulting in a right index fingertip amputation.",0
"An employee had climbed down from a roof and was still wearing his fall protection harness and lanyard. He proceeded to operate a forklift and ran over his lanyard, pulling him out of the forklift.  He was hospitalized with three broken ribs and other possible injuries.",1
"As a forklift was being lifted into a truck, an employee's foot was caught in a dock plate. The employee suffered a broken left hip and was hospitalized.",1
An employee was sweeping when his hand hit against a metal frame. His hand experienced swelling that required surgery.,1
"An employee was washing down an area using an 8-foot portable ladder. The employee was descending the ladder and on the way down, felt dizzy, missed the last step, and fell and hit his head on the concrete floor. The employee suffered a cut on the scalp that required stitches and hospitalization.",1
An employee was adjusting a clutch brake on a tractor. The clutch brake cylinder amputated the employee's left ring fingertip.,0
"An employee was on an extension ladder removing bolts to detach a 15x6 tank from a tank cart arm when he fell 12 feet from the ladder to the concrete below. He landed on his right side, breaking his right wrist and right femur.",1
"An employee was on a trailer moving some equipment (mix tanks) when he fell off the trailer and hit the ground, breaking his right leg.",1
"An employee was standing on a three-step, 3-foot ladder working on a wall. As she stepped down, she fell 18 to 24 inches to the floor. She suffered a broken right ankle and was hospitalized.",1
"An employee was attempting to retrieve a socket wrench attached to a truck when another employee started the truck. The flywheel then caught the employee's finger, resulting in an amputation.",0
"An employee was loading a 705-pound steel coil on a de-coiling wheel. The coil slipped off the forks of a forklift and fell to the ground, striking the employee. The employee suffered a broken ankle.",1
"An employee was attempting to lower a dock plate. He lifted the dock plate up, then placed his fingers between the dock plates in order to fold the plates out so he could lay them flat. In doing so, his right hand fingers were pinched between the dock plates. His fourth finger needed stitches and his third finger was cut to the bone. One of his fingers required partial surgical amputation.",1
"On September 17, 2019, an employee was filling an oxygen bottle when it caught on fire. The employee was burned and hospitalized.",1
An employee fell while dismounting an excavator. His elbow struck the concrete and was broken.,1
A temporary employee was dragging boxed furniture off a truck trailer. The truck was not backed up all the way to the building and the employee's leg slipped between the truck and building. The employee was hospitalized for leg and hip injuries.,1
"An employee was operating a machine when the ram brushed his gloved right hand. He was startled and extended his fingers.  The fourth fingertip on his right hand was then run over by the roller wheel on the ram head, resulting in a fingertip amputation.",1
"An employee was using a high-pressure washer to clean an aircraft when his left foot was sprayed with the water, causing a puncture wound.",1
"An employee was in a scissor lift attaching a roof drain pipe to the wall when the employee fell 8 to 10 feet onto the concrete floor, fracturing the left ankle.",1
"An employee was working in the field, servicing customer fire trucks at their location. The employee began to feel dizzy and disoriented. He left the work site and drove himself home. He was hospitalized later that evening for heat stress.",1
"An employee was walking through a food pickup area. She slipped on a piece of ice and fell, suffering an open distal fracture of the left knee.",1
"An employee was grinding/cutting off an old steel column for an overhead canopy using a 4.5"" angle grinder with a cut-off disc when the grinder slipped and severely lacerated the employee's left arm.",1
"An employee was helping process cattle into a chute. While the employee was waiting for the next cow to come into the chute, the back gate was opened and the employee's finger was pinched between it and the bracket. The employee suffered a partial amputation.",0
An employee fell and required hospitalization.,1
An employee was helping re-spool the winch line on a tubing tester truck when the line caught his right hand. Four fingers were amputated.,0
An employee delivering mail was walking when he fell on loose gravel and broke his hip.,1
An employee was injured while working on a trailer. The employee was hospitalized.,1
"An employee fell, suffering an injury to the left hip.",1
An employee fell 17 feet to the floor below while releasing a load of steel decking that had been hoisted by a crane. The employee suffered broken bones and internal injuries.,1
An employee was on a ladder checking the framing on a church's roof when the employee slipped from the ladder and fell approximately 6 feet. The employee was hospitalized with three cracked vertebrae and three broken ribs.,1
"On September 17, 2019, an employee collapsed while loading gallon jugs into a pickup truck. The employee's head hit the ground and the employee was hospitalized with a head fracture.",1
"A temporary employee was operating a power folder when the equipment was activated via the foot pedal. Two of the employee's fingers were then caught under the clamp, crushing the fingertips and resulting in a fingertip amputation.",0
An employee slipped on sauce that had been spilled on the floor and fell flat on his back. He suffered a collapsed right lung.,1
"An employee was loading chemicals into a pickup when he slipped and fell to the ground. He suffered a dislocated shoulder and was hospitalized, requiring surgery.",1
"An employee lost his balance while moving a tire and fell, striking his right forearm on a steel plate.",1
An employee was working in the freezer/cooler area when he incurred frostbite to his right ring finger and middle finger.,1
"An employee was walking down a driveway. Her left foot hit raised pavement and she fell. Both her knees, both her hands, and her face struck the ground; she suffered a broken left patella, a sprained left wrist, and bruising under her lips.",1
An employee was hospitalized after a fight in a parking lot.,1
An employee was using a spot welder to weld two 10-inch rings. His right index finger was pinched in the welder and the tip was amputated.,0
"An employee was making an adjustment on a piece of machinery when his left index finger was caught in a pinch point, resulting in a fingertip amputation.",1
An employee was attempting to clear a blocked grease line by injecting steam into the line. Pressure overcame the seal on the lid and ejected hot grease onto the employee's shoulder and arm. The employee sustained second degree burns to the top of the shoulders and the right arm. The employee was hospitalized.,1
"On September 17, 2019, an employee was working when she experienced an allergic reaction to an unknown substance, requiring hospitalization.",1
An employee walking on the sidewalk was struck by a car as it was coming out of a garage. The employee was hospitalized with a fractured pelvis.,1
"An employee was loading a truck when the employee's left ring finger was caught in the truck's lift gate, resulting in a finger amputation.",1
"While performing a break-out and disassembling equipment on-site, an employee removed the meter cover. Then, while removing the bypass blades with pliers and a screwdriver, the screwdriver contacted the meter box, causing an arc flash. The employee sustained second degree burns on his face, chest, and left hand, and sustained a second/third degree burn on his right hand.",1
"A border patrol agent was working at an access control check point when a driver in a stolen vehicle ran the checkpoint, blew out his tires, and attempted to escape down the road. The agent was chasing the driver on foot across the roadway median when the agent was struck by an 18-wheeler. The employee suffered a broken lower right leg and required a right leg amputation below the knee.",1
"An employee's left hand was pinched between the forks of a forklift and a trash hopper, resulting in an amputation of the left pinky finger above the first joint.",0
An employee was walking in the parking garage and fell. Her right knee cap was fractured and required surgery.,1
"An employee was on an A-frame ladder changing a light bulb. When he started to dismount, he shifted his weight and the ladder slid out from under him. He impacted the tile floor and suffered a broken right arm, three fractured ribs, a broken collarbone, a broken cheek bone, and a broken eye socket.",1
An employee was hospitalized due to dehydration.,1
"An employee fell from a fixed ladder to the ground about 10 feet below. Both his heels were broken and he was hospitalized, requiring surgery.",1
"An employee was trying to dislodge the lift gate on the rear of a delivery truck. The gate abruptly dropped on the employee's left hand and injured it. The employee was hospitalized, requiring surgery.",1
"An employee's finger was caught in a molding machine, resulting in a fingertip amputation.",0
"On September 18, 2019, an employee was about to remove a 1.5 gate bilge valve inside a vessel's engine room (offshore towing vessel) when he collapsed and then regained consciousness. He was hospitalized due to dehydration (heat stress).",1
An employee was using an electric food slicer when it caught his left ring finger and amputated the tip.,1
"While engaged in horseplay, an employee fell from trusses to the second floor. The employee suffered a torn liver and a broken jaw, and was hospitalized.",1
"An employee tripped on an uneven sidewalk and fell to the ground, suffering a broken left wrist, a broken neck vertebra, and a laceration to the left temple.",1
An employee's right hand was caught between a guard and a band mill. The employee's middle finger was amputated to the first knuckle.,0
An employee was struck in the leg by pieces of a tire that ruptured while being filled with air. The employee was hospitalized.,1
"An employee was working from a ladder painting the inside of an apartment room. The employee opened the lid of a paint remover and inhaled the vapors, causing a burning sensation to the employee's throat.",1
"An employee was carrying a 24-inch gasket on cardboard wrapped with plastic on the tips of his fingers. The wrapped gasket slipped out of his hand, and he struck a work bench and then fell to the floor. He suffered a fractured ball joint in his right hip.",1
"An employee was climbing out a window and onto a roof ledge when he slipped. While trying to hold on and break his fall, his right forearm contacted glass from a possible broken window and was lacerated.",1
"On September 19, 2019, an employee was about to remove a 1.5 gate bilge valve inside a ship vessel's engine room (offshore towing vessel) when he collapsed and then regained consciousness. The employee was hospitalized for dehydration and heat stress.",1
"While following an excavator, guiding in new material, an employee became disoriented and collapsed due to heat exhaustion. The employee was hospitalized.",1
"An employee was changing out a 2.5-pound CO2 canister for a kombucha kegerator when the replacement canister involuntarily went off due to a gas release and flew into the employee. The canister struck the employee's right foot and split it open, requiring surgery and hospitalization.",1
"While unloading packages from the rear door of a truck onto a dolly, an employee became ill and experienced cramping, nausea, and pain. He was hospitalized for dehydration and acute kidney failure.",1
An employee became ill from heat exposure while working at a substation. The employee was hospitalized.,1
"An employee was cleaning a tortilla mixer when the machine turned on. His right arm was then caught in the machine, resulting in a broken bone above the right wrist.",1
"An employee fell about 7 feet from a roof to the ground, suffering head, rib, and hand injuries. The employee was hospitalized.",1
"An employee was attempting to install a main landing gear when his finger was caught between the gear lube and trunnion lube, resulting in left middle and ring fingertip amputations.",1
"An employee completed repairs on a potato cleaning machine and was climbing to the top of the machine to remove a rock. The employee then fell into the machine, and the employee's arm was drawn in between the metal and rubber rollers. The employee's arm was crushed up to the bicep.",1
"An employee was changing the saw blade on a piece of machinery. A tool fell onto the machine, causing it to activate, and the blade amputated the employee's middle and ring fingers at the first knuckle.",1
"An employee was attempting to move a 3,000-pound forklift battery when his right index finger was caught between the battery and the battery housing, resulting in a fingertip amputation.",0
"An employee was refueling his equipment (track-hoe) when he noticed a few sparks occur once he touched the fuel nozzle to the neck of the fuel tank opening. He went to pull the nozzle out and a burst of flames shot out, causing burns on his right arm and the right side of his face.",1
An employee fell backwards and struck the back of his head. He was later hospitalized for internal head bleeding.,1
"On September 18, 2019, at approximately 20:30 hours, an employee was replacing three fluorescent light units with LED light units in the HR office. The lights were turned off using two toggle switches, but were still energized. While installing the second LED light unit, the employee sustained an electric shock, second degree burns to his right hand, and a labral tear and crushing injury to the right shoulder.",1
"An employee was putting carboard boxes into a compactor when he became dizzy and fell, striking his head on the ground.",1
"After repairing a ceiling from a ladder, an employee was found on the floor with one leg in the ladder rung. The employee was hospitalized with a forehead laceration and left leg and back injuries.",1
"An employee was installing siding at an apartment complex when he became dizzy and fell off the roof, hitting his head and injuring his neck. He was hospitalized.",1
"On September 18, 2019, a maintenance employee was installing panels for new warehouse racking from a scissor lift when a panel fell, flipping the employee out of the scissor lift. The employee hit the concrete floor and suffered head and back injuries that required hospitalization.",1
An employee was cutting wood for a residential deck using a chop saw. The saw amputated his left thumb.,1
"On September 18, 2019, an employee was removing rust from a round stock with emery paper while the part was turning on a lathe when the employee's glove was caught on the round stock, resulting in hand injuries.",1
An employee was working on a ladder painting the exterior of a building when the ladder slid out and the employee fell to the ground. The employee was hospitalized with a fractured left leg.,1
"An employee fell off a horse, suffering three broken ribs and a collapsed lung. The employee was hospitalized.",1
An employee was unloading parts from a window staking press when the machine amputated the tip of her right ring finger.,0
"Two employees were removing a cutter bar from a soybean header. The bar slid into one employee's right hand, amputating the little finger.",0
An employee was pushing an engine block onto a conveyor when their right thumb was pinched between the engine block and a clamp inside a machine. The employee sustained a laceration and an open fracture to the thumb.,1
"An employee was measuring the 4x4 posts of a staircase. The employee was squatting down on the sixth or seventh step from the bottom, with his back facing down the stairs, looking at the condition of the soil under the stairs. While he was doing so, the ball of his foot slipped off the leading edge of the step, causing him to lose his balance and fall backwards to the bottom of the staircase and onto the pavement. He landed on his left side, sustaining contusions to the left hip and left shoulder as well as a sprain to the lower back. He was hospitalized.",1
"An employee was using a forklift to tow a baggage cart. The cart disengaged from the forklift, and he left the forklift to stop the cart from rolling down a ramp. The forklift struck him from behind, breaking his left ankle.",1
"During their work shift, three employees were involved in horseplay that progressed into an altercation. One employee threw a pair of scissors at another employee, puncturing his arm and causing vascular and muscular damage. The injured employee was hospitalized and had surgery.",1
"An employee was operating a sheet metal folding machine. The machine activated and crushed the employee's hands, causing the amputation of three fingers. The employee was hospitalized.",1
"An employee was working from plaster scaffolding to repair a 9-foot ceiling. The employee fell about 3.75 feet from the scaffolding to the cement floor, suffering several broken ribs, a punctured right lung, and a broken pelvis.",1
"On September 18, 2019, an employee was directing a fork truck operator and was struck by the forks, suffering a broken right lower leg. The employee was hospitalized.",1
"An employee walking towards a patient's home stepped onto a curb, tripped and fell. The employee was hospitalized with a fractured left arm, and pain in the left shoulder, elbow and knee.",1
"A maintenance employee was trying to clear a mail jam from a machine when the conveyor pulled his right arm into the machine. He suffered a broken humerus bone to his right arm, requiring hospitalization and surgery.",1
"An employee was installing a turret wheel on a tablet machine. When the employee was moving the machine into position, it activated and a punch came down on his right ring finger. The fingernail was partially removed, with no loss of bone.",0
"An employee was showing another employee how to conduct a test on a machine when the employee's right hand entered the machine. The employee's fingers were caught between a roller and belt, crushing the right middle and ring fingers and resulting in a ring fingertip amputation.",0
"An employee was trying to free a pipe on a horizontal directional drill when the pipe shifted, catching the employee's finger between the drill pipe and the frame of the unit and resulting in a fingertip amputation.",0
"An employee was working on a conveyor belt assembly. The employee's finger was caught by a belt and hit a pulley, causing an avulsion to the left index finger.",1
"An employee tripped and fell to the floor, suffering a broken nose and a swollen, bruised right eye.",1
"An employee was cleaning a spill bucket at a fuel station. A truck struck her and threw her 8-10 feet. She suffered a head laceration, a broken collarbone, and a dislocated hip.",1
"An employee was helping move cows into a milking parlor. A cow spooked and turned quickly, pinching the employee's hand against the gate. The tip of his left ring finger was amputated.",0
"Employees were installing a 36-inch auger bore under a railroad. A 40-foot 
length of casing and auger had just been lowered so it could be connected to the previously installed length. The casing moved unexpectedly and pinched an employee's left thumb between a block of wood and the boring machine. The employee was hospitalized, undergoing surgery to the thumb.",1
"An employee was placing steel abutments onto a sled (a setup and transportation tool) using a hoist. Two abutments were being lifted in the hoist. As the employee placed one of them, the second one swung back toward it, pinching the employee's left ring finger between the two. The employee was hospitalized, undergoing exploratory surgery.",1
"An employee was operating a shear on the continuous rolling mill. While a steel bar was being cut on the shear, it pivoted and struck the employee, fracturing their left arm.",1
An employee was operating a hydraulic jig and positioning a plate for tack welding when the hydraulic ram actuated the swing clamp. The swing clamp amputated the employee's right pinky fingertip.,0
"An employee's foot was caught in a door and a bone in the foot was broken. He was hospitalized, undergoing surgery.",1
"An employee climbed onto a collector conveyor belt to pry a large rock out from under a feeder grate. The plant was started and the employee was pulled down onto the conveyor under another feeder conveyor. He fell clear after about four seconds of the belt moving under him, having suffered several broken ribs and an internal injury.",1
"An employee was performing an oil change when he slipped and fell to the floor, hitting the back of his head. He suffered a concussion.",1
An employee was exposed to latex balloons in a conference room and had an anaphylactic reaction.,1
"The injured employee was building scaffolding in a stairwell when another employee approached from behind, struck him in the back of the head and then pushed him down the stairs, approximately 6 feet. The injured employee was hospitalized with a subdural hematoma, lacerations to the back of the head, lacerations to the face/lips, and contusions to the back.",1
An employee was replacing a separator cap on a back engine on a sweeping truck when the blades on the radiator fan amputated two of the employee's fingertips.,1
"An employee was transferring xylene (a solvent) from tanks into a mixer. The xylene splashed on the employee, injuring the employee's face and eyes.",1
"While repairing a stuck/clogged valve, an employee fell 8 to 9 feet from a ladder and landed on the floor. The employee sustained a fractured left leg.",1
"While loading angle into a machine for cutting, an employee's finger was pinched between the angle being loaded and the machine's clamp resulting in amputation of the left middle fingertip.",0
An employee had been washing the covered area of the parking lot. The employee was coming down an extension ladder and fell about 6 feet to the ground. The employee sustained two fractured vertebrae in their back.,1
"On September 19, 2019, an employee was guiding a piece of product being lifted by an overhead crane. The employee's hand was crushed between two pieces of product; the employee suffered a broken finger and needed stitches.",1
An employee operating a horizontal band saw contacted the blade and sustained a finger amputation.,0
"An employee tripped over fixed equipment, falling to the floor and striking the equipment. His face and shoulder were injured, and he was hospitalized.",1
An employee was using a cutter to cut ducting. The cutter amputated the employee's middle fingertip.,0
An employee tripped and fell on asphalt sustaining a fractured hip and bruises to the hand and elbow.,1
"An employee was climbing an extension ladder when it slid on the floor. The employee fell to the floor, suffering an open fracture of the right tibia and a dislocated right ankle.",1
An employee was hospitalized after a welding wire poked through his welding glove causing an infection of the finger.,1
An employee was moving 20-hp electric motor weighing approximately 280 lbs. The employee was sliding the motor on the floor in the storage area using their foot and guiding it with their hands. The employee's finger was pinched between the shaft of the motor they were moving and a stationary motor resulting in an amputation of the left pinky finger.,0
"An employee was injured when a forklift drove over their left foot, causing the employee to buckle, and then the forklift drove over their lower right leg. The employee was hospitalized with a fractured right tibia.",1
"An employee was unstrapping a pipe rack when it fell over on the employee, who suffered fractured vertebrae.",1
"An employee was driving a forklift, moving coiled steel. The employee dismounted the forklift and went to roll the coil to reset it. The 1,520-pound coil rolled toward him, over his ankle, causing a compound fracture and lacerations.",1
"An employee was working on an overhead power line from the bucket of an aerial lift. The line touched his hands, burning them. They were amputated at the hospital.",1
An employee was running a tufting machine when it crushed the employee's left index finger.,1
"An employee was pouring molten steel into a mold. Some of the steel passed through a trench cover's lifting holes and came into contact with water. This created superheated steam, which caused the molten steel to spray back through the holes onto the employee. The employee suffered second-degree burns on 18 percent of the body: arms, upper front torso, face, and mouth.",1
An employee fell from a roof to a lower-level roof 12 to 15 feet below when a lifeline broke. The employee suffered a fractured collarbone and wrist and bruised ribs and was hospitalized.,1
"An employee was sealing the roof vent on a grain bin (about 24 feet above the ground) for fumigation. The weld holding the employee's fall protection anchor point failed; the employee fell from the roof of the bin, suffering broken bones in the ankle, heel, and pelvis on the left side.",1
An employee was working near a conveyor belt system when their left ring finger and middle fingertip were amputated by the conveyor.,0
An employee was cutting off floor decking with a circular saw. The saw kicked back and cut into the joint of his left index finger.,1
An employee and a co-worker were installing conveyor equipment at the worksite. The injured employee's right hand became caught in the belt of a conveyor while it was moving. Multiple fingers and a thumb were amputated.,1
"On September 19, 2019, an employee was conducting nursing activities inside the facility. Chemicals being used on the roof of the facility were pulled into the ventilation system and the employee suffered an allergic reaction.",1
"An employee was cutting a large piece of metal with a torch. The lines that supplied gas to the torch burst into flames, causing first- and second-degree burns to the employee's thighs and abdomen.",1
"An employee fell from a roof to the ground, suffering a broken ankle and broken vertebra. The employee was hospitalized.",1
"On September 20, 2019, an employee was operating a runoff machine. The fiberglass material started to bind up. As the employee was correcting the issue, his left hand entangled in the fiberglass strands. The strands pulled his hand in, resulting a partial amputation of the thumb.",0
"While loading/offloading a truck, an employee's hand was caught between a skid tote and a pipe. The employee's right pinky fingertip was amputated without bone loss.",0
"An employee was clearing the conveyor belt that fed an auto shredder. A piece of rebar stuck in the conveyor struck the employee's lower left leg, breaking it.",1
"An employee was moving mail from a flat sorter area to a trolley. As he left the flat sorter area, he tripped over an all-purpose-container and fell to the ground, breaking his left hip.",1
An employee was changing a tire. The employee's right leg was pinned and lacerated between the tire-changing machine and the automobile.,1
An employee was stringing material on a line. She was pulled into a roller and suffered finger fractures and third-degree burns. She was hospitalized.,1
"An employee was using a crane to move a 6,000-pound piece of equipment into another piece of equipment. The first piece did not fully go inside the second, causing the nylon lifting straps to loosen and making adjustments necessary. As the employee made adjustments, the 6,000-pound piece suddenly dropped into the other piece; the nylon straps tightened on the lifting bail ring and crushed the employee's fingers.",1
An employee was changing a fan belt on an HVAC unit when his left hand got caught up in the belt. The tip of his index finger was amputated.,0
"An employee was run over by a skid steer, suffering a fracture to his right lower leg.",1
"An employee was picking up an object off the ground. A forklift backed into the employee, lacerating the employee's right leg.",1
"An employee was caught between a beam and an aerial lift, suffering a fractured top rib and a bruised shoulder.",1
"An employee was scanning boxes as they came off a truck. Her foot slipped between the loading dock and the trailer, and her leg was broken in multiple places.",1
"A driver climbed on top of a garbage truck to close the doghouse door on the compactor. He slipped and fell, suffering a broken right wrist, a compound fracture above his right elbow, and a dislocation to the elbow. He was hospitalized, requiring surgery.",1
"A stack of about 20 pieces of plywood fell on an employee's left leg, scraping the entire and landing on the left ankle. Both bones in the employee's lower leg were broken.",1
"An  employee was using a chop saw to cut boards. A board jammed. As he was clearing the jam, his right hand came in contact with the blade, resulting in the amputation of his middle and index fingers at the first joint. The machine was guarded at the time.",0
"An employee was moving a block of expanded polystyrene foam from a tilt table with a cart. The block started moving toward him, causing him to fall to the ground. He suffered a broken right femur and was hospitalized, requiring surgery.",1
"An employee stepped off a ladder onto a roof and fell about 10 feet. He suffered forehead lacerations, a broken right forearm, a broken left shoulder, a broken rib, and a broken nose. He was hospitalized, undergoing surgery to the forearm.",1
"An employee was pulling a 700- to 800-pound rigging hoist, which was on a four-wheel cart, out of a test fixture. The cart caught the side of the fixture and the hoist slid off it onto the employee's steel-toed boot. The employee suffered a fracture and laceration to the foot, as well as a knee contusion. The employee was hospitalized, requiring surgery.",1
"An employee inhaled chlorine from chlorine tablets he was retrieving. The next day, on reporting to work, he experienced burning in his throat and lungs when taking deep breaths. He was hospitalized.",1
An employee was dragging cut brush and forming a pile. The employee was using a chainsaw to cut up the brush. The chainsaw kicked back and cut the employee's right thigh and right arm. The employee was hospitalized for surgery.,1
An employee was loading well pipe into a trough when it bounced and dropped on his right index finger. The finger was amputated at the first knuckle.,0
"At about 9:30 a.m. on September 20, 2019, an employee was about to cut a board on a table saw when the sawblade amputated the first and fifth digits of the employee's right hand.",0
"At about 9:30 p.m. on September 20, 2019, an employee was entering a hospital's behavioral health unit in response to an alarm. A patient struck him in the face, causing severe facial injuries. The employee was hospitalized.",1
"An employee was driving a forklift truck. A nylon cord that was wrapped around the employee's left hand became caught under the forklift's tire, causing the partial amputation of the hand.",0
"An excavator was being used to remove a handrail attached to the bridge sidewalk. The handrail struck an employee in the head, causing a skull fracture and a broken rib. The employee was hospitalized.",1
"An employee was cleaning out dough at a conveyor belt. The belt caught the employee's left arm, causing it to strike a roller assembly. The arm was broken.",1
An employee was standing in a community center when someone at her side tripped on the wheel of a rolling walker and fell against her left knee area. She suffered a broken shinbone and was hospitalized.,1
An employee was performing maintenance work on a diesel generator's turbo chamber when the employee's hand entered the chamber to see if the turbo was functioning properly. The generator then amputated the employee's left pinky fingertip.,0
"An employee was unloading a truck with a stand-up forklift. The forks went beneath the rack footings and the forklift continued forward into the rack. The employee was crushed between the forklift and the racking, suffering three broken ribs, two fractured vertebrae, and internal bleeding.",1
"An employee was bending down, reaching through a tower frame for a work platform to bind straps and frames together in preparation for shipping. The frame flipped over and landed on his left ankle, dislocating and fracturing it. He was hospitalized.",1
"An employee was operating a chute for cattle movement. A steer reversed course and hit a cattle gate. The gate hit the employee, who then struck a secondary gate.",1
"An employee was repairing the drive unit on a lint beater. The machine was reactivated and its belt caught the employee's right ring finger, causing the amputation of the fingertip.",1
"An employee was using a bandsaw to cut out foam for packaging. The sawblade came into contact with the employee's left index finger, amputating the tip.",0
"An employee was helping install an aboveground storage unit. While the employee was helping lift two 26,000-pound panels, his left thumb was caught and amputated between the panels.",0
"An employee slipped and fell, suffering a contusion and an open wound.",1
"An employee operating an electric pallet jack crashed into a rack, resulting in a foot injury.",1
An employee was lifting a flood gate when it dropped onto his right toes. One of the toes was amputated.,1
"An employee fell from a bicycle to the ground while conducting trail maintenance operations, fracturing the right arm.",1
"An employee was operating a stand-up forklift in reverse while carrying a load. The employee was caught between the forklift and the racking system, suffering a broken rib.",1
"An employee was cutting bands on a pallet when he tripped and fell, breaking his right hip.",1
"An employee was dismantling equipment for scrap removal. As he was about to remove a motor from a height adjustment rack, the motor slid down the track and struck his left ring finger. He suffered a partial amputation and was hospitalized.",1
An employee was working with a landscaping crew. The employee suffered a separated shoulder with a possible chest contusion while pulling a seedling.,1
"An employee was changing dies on a press. The upper die slipped out and crushed the employee's right ring finger, resulting in an amputation.",0
"An employee was providing roadside assistance in a highway breakdown lane. A passing vehicle struck the employee's vehicle, and he suffered a spinal injury, a punctured lung, and internal bleeding. He was hospitalized.",1
An employee was aligning the wheels of an automobile on an alignment lift. The car rolled off the lift and into the garage door frame. The employee's left hand was caught between the automobile and the door frame; the ring finger and the tip of the little finger were amputated.,1
"An employee was clearing broken sheet glass from a rack. A piece of the glass punctured the top of his right hand, lacerating a tendon.",1
"An employee was picking cases in a dairy refrigerator. As the employee walked towards a pallet, boxes of product fell and struck the employee. The employee was hospitalized for a crushed pelvis.",1
"An employee stepped back into the aisle behind a cash register. Her heel caught part of a motorized cart, causing her to lose her balance and brace her right arm. Her right shoulder was dislocated. She was hospitalized.",1
An employee was working in the back of a restaurant when a man came in and stabbed the employee eight times.,1
"An employee was scanning dog food with a hand scanner when the employee turned and the employee's foot became caught underneath a kick plate. The employee fell to the ground, resulting in a fractured femur.",1
"A maintenance technician was replacing a hydraulic hose on an extruder. An adjacent hot water hose burst at the connector, spraying him with 200-degree water. He suffered second-degree burns to his right arm, stomach, and right thigh and was hospitalized.",1
"An employee was changing out a fan belt in an overhead kitchen fan. The belt caught the employee's right middle finger, causing a laceration and partial amputation.",0
"An employee was walking across the carwash bay just as a vehicle was exiting it and was struck. The employee was hospitalized with a skull fracture, subarachnoid hemorrhage, and friction burns to the left shoulder, elbow, and ankle.",1
"An employee was placing a shelf on a rack system when he lost balance and fell 4-5 feet from the rack to the warehouse floor, striking his head and sustaining a head contusion.",1
An employee was opening the lid of a trash bin when she fell about a foot to the asphalt. Both her wrists were broken.,1
An employee was walking on a lawn to make a delivery and fell into a 13-ft. sink hole. The employee sustained bruises.,1
"An employee was working from a ladder when he fell to the ground, hitting his head and suffering temporary paralysis.",1
"An employee was taking a law enforcement handgun training class. As she pulled the gun out of the holster it discharged, shooting the employee in the right calf.",1
An employee was coming upstairs from a basement when his foot was caught in a hole in a step. He fell backward and tore his quadriceps. He was hospitalized for surgery.,1
"An employee tripped on a pallet while walking. He fell to the concrete, suffering a broken left femur.",1
An employee was cutting small pieces of wood on a bandsaw. The saw amputated the tip of his left little finger.,0
"An employee was operating a scissor lift from the ground using handheld controls. The lift turned and its right wheel struck the employee, breaking the tibia and another leg bone. The employee was hospitalized.",1
An employee was descending a ladder on the rear of a bobtail fuel truck. The employee fell to the ground and suffered a head injury. The employee was hospitalized.,1
"While trying to dislodge a stuck sling, a rigger was caught between two 24-inch pipes and suffered a pelvic fracture. The rigger was hospitalized.",1
"Am employee was cleaning an open-top tank by filling it with water to flush it. The employee lost consciousness and her forehead struck the top of a gate valve, which caused a vertical laceration.",1
An employee was on a fiberglass extension ladder strapping electrical conduit to a hanger wall when the ladder slipped on the polished floor. The employee fell to the concrete floor and fractured a femur.,1
"An employee was performing routine maintenance on equipment when a bolt dropped onto a moving chain and sprocket belt. He attempted to retrieve the bolt and his finger was caught in the chain and sprocket, resulting in a partial amputation of his left pinky finger.",0
"On September 23, 2019, a blow mold assembler suffered a crushing injury to her left middle finger in the nail area, resulting in a partial finger amputation.",0
"At about 4:00 p.m. on September 23, 2019, an employee was moving a shoulder widener paving machine along a highway under construction. The machine rolled over the edge of the highway embankment, ejecting him. He suffered severe head and facial trauma and was hospitalized.",1
A machine operator was cleaning a glue pod when his right thumb became stuck. The motor caused the amputation of the thumb tip.,0
"At about 4:11 p.m. on September 23, 2019, an employee was putting a rubber O-ring on a tire using a pry bar. The pry slipped and the wheel lock ring amputated the employee's left index fingertip.",0
An employee was getting into his truck when he fell and struck his head on the asphalt. He suffered a fractured skull and brain bleeding.,1
"An employee was driving a trailer truck when it lost a tire. The employee left the vehicle and was trying to stop the tire from rolling into oncoming traffic when his right foot got caught in its rim. He fell on his left knee, suffering a fracture to the left leg.",1
"An employee was removing a ring that had jammed inside the a bore grinding machine during setup. After the ring was retrieved, the machine loaded the next ring from above, pinching the employee's right index finger between the ring and the cylinder. Part of the inside tip of the finger was pinched off.",0
"An employee was climbing down a ladder from the top of a trailer. He fell, suffering broken ribs and a punctured lung.",1
"An employee was walking through the shipping section of a warehouse. A forklift ran over the employee, who suffered a broken right leg, a broken left shoulder, and four broken ribs on the left side of her body. She was hospitalized.",1
An employee was pulling a load for a truck. The employee's foot was caught between the pallet and the pallet jack. The foot was crushed and broken.,1
"A door closed on an employee, bruising the employee's lower back and buttocks.",1
"An employee was operating a forklift loaded with rebar. The front left wheel of the forklift hit a lower/uneven surface, causing the forklift to tip over. As the employee was getting away from the forklift, the fork or the rebar struck him and knocked him to the ground. He suffered a broken right femur, severe bruising of the right arm, and cuts and scratches on the face.",1
"At about 8:00 a.m. on September 23, 2019, a doctor was bitten by a cat on the right wrist and hand while treating it. The wound became infected, and the employee was hospitalized later that evening.",1
"An employee was removing an excavator bucket pin with a crowbar. The crowbar slipped and struck the employee, who fell and suffered a cut on the right side of his face, a broken nose, a possible broken right upper cheek, sore neck muscles, and a concussion. The employee was hospitalized.",1
An employee was struck by a motor vehicle while flagging traffic. The employee suffered a broken leg.,1
"While repairing a tin roof, an employee fell through a skylight to the concrete floor about 15 feet below.",1
"An employee was unloading job material from the bed of a company vehicle when his left thumb was pinched between steel and the bed of the truck, resulting in a partial amputation.",1
"On September 23, 2019, an employee was cleaning machinery after production had stopped. The employee was struck by the bone cannon hopper as it was being emptied, causing possible ruptured spinal disks.",1
"An employee was inside a machine attempting to fix the glue mechanism when the machine activated. The machine's tray cut his lower left leg, requiring hospitalization.",1
An employee was standing near a low-pressure separator. A flash fire in the separator caused a hose to become detached. The hose struck the employee in the head. Fire was coming out of the hose when it became detached and the employee was burned on the head as well. The employee was hospitalized for a head injury and burns.,1
"An employee fell, suffering an open wound to the lower left leg. The employee was hospitalized.",1
"An employee was laying out hardware and preparing to lay out doors. Several doors came down and fell on his lower left calf area, breaking his tibia. He was hospitalized, undergoing surgery.",1
"An employee fell from a bailer while operating it, landing on the ground or on equipment and suffering a skull fracture. The employee was hospitalized.",1
An employee was flagging traffic when a truck ran over his left foot and ankle. The ankle was broken.,1
"An employee was installing snow retention on a roof from a 16-foot ladder. The employee fell from the ladder, breaking one to three vertebrae.",1
"An employee was climbing on a roof and slipped in wet coating, falling about 15 feet to the ground. The employee suffered arm and leg fractures and was hospitalized.",1
"An employee was climbing out of a tractor trailer. The employee fell to the concrete dock floor, suffering a broken hip.",1
"An employee fell in a stairwell, landing on a hard surface and suffering a knee injury.",1
"An employee was moving stone slabs from a forklift to a stacked pile of stone in a yard. The slabs began sliding off the forklift supports, and the employee's fingers were pinched between two of them. The fingertips were torn off, and the fingers were crushed and torn open from the fingernail about halfway down the fingers; no bone was involved.",0
"Limestone panels were being set. A 1,200-pound panel fell over and knocked over a ladder, which in turn struck an employee and pinned him to the ground. He suffered a broken pelvis.",1
"An employee was securing a load on a flatbed truck that had a crane attached along with portable forks. A fork fell on the employee's leg, causing an injury to the heel that required surgery.",1
"A nurse was helping a patient (who was sitting on a 3-foot-high-stretcher) sit up and get off the stretcher. She was pulling up on the patient when she felt a pop in her lower back. She was hospitalized, with back pain radiating to her right leg.",1
"An employee was climbing a portable ladder. The ladder slipped and the employee fell onto a shovel 4 or 5 feet below, suffering bruised ribs and a partially collapsed right lung. The employee was hospitalized.",1
"An employee exited a truck, which then rolled over him. The employee sustained injuries to the skull and legs.",1
"An employee was inspecting a fan assembly. The fan belt had been pulled, and the employee was checking fan blade rotation, when the employee's right hand was caught in the belt and pulley system. The right ring finger and the tip of the little finger were amputated.",0
"An employee was working in a grease manufacturing area. The employee became nauseated, suffering lightheadedness and leg cramping. He was hospitalized for dehydration.",1
"An employee was moving a pump motor when it fell on his foot, breaking it.",1
An employee was walking into work through the employer's parking garage and tripped over a low-profile cargo cart. The employee sustained a left ankle fracture.,1
"While doing scaffold work, an employee became overheated and started cramping. The employee was hospitalized for dehydration.",1
"An employee slipped on a wet floor in a grocery store, falling to the floor. The suffered a broken tailbone, a broken rib, and a head contusion.",1
"On September 24, 2019, an employee was climbing out of the cab of a truck when he fell to the asphalt/concrete ground, striking his head.",1
"An employee fell from the back of a propane delivery truck to the ground, suffering head and neck injuries.",1
"An employee was moving trays onto a production line. The cart shifted and trays landed on his left ankle, causing a fracture/dislocation. The employee was hospitalized.",1
"An employee was helping another employee troubleshoot a ceiling-mounted VAV box on a 6-foot step ladder. He was shocked and fell about 3 feet to the floor, suffering back injuries. He was hospitalized.",1
An employee was sorting potatoes on a conveyor. The chain from the conveyor's chain drive struck and avulsed the employee's right index fingertip.,1
An employee was grinding a piece of metal on a bench grinder. His right hand was caught in the grinder and the thumb was amputated near the first joint.,0
"An employee was installing cable along the exterior of a residential building from a 24-foot extension ladder. The ladder twisted and the employee fell about 10 feet to the ground, suffering a facial laceration and foot, back, and upper torso/rib injuries.",1
An employee was trying to lay metal flat on a cooling table from a safety basket. The arm of a tail stretcher machine caught the employee's right leg and broke the thigh.,1
"Employee was loading sheet metal into a press die. The die activated, caught the employee's hand, and crushed it. The employee was hospitalized.",1
"While repairing a roof, an employee fell from the roof and suffered a shattered heel, a broken ankle, and a hairline fracture to the knee. The employee was hospitalized.",1
"At 8:00 a.m. on September 24, 2019, an employee was pushing a garbage cart. The employee tripped on the cart's lid and fell forward into the cart, suffering breaks to the nose and orbital bone.",1
An employee fell while walking in the chiller room. He broke his ankle and fibula.,1
"An employee was driving a scissor lift into a warehouse. The lift jolted and the employee fell out, suffering a cut above the right eyebrow and a dislocated left elbow with two broken pieces of bone. The employee was hospitalized, requiring surgery.",1
"A door closed on an employee's left middle finger, resulting in an amputation to the fingertip.",0
"An employee was pulling a slide arm from a cold run rig cart. An adjacent cart pinched the slide arm the employee was pulling, causing the amputation of the employee's fingertip.",0
"An employee was welding near another employee who was using a hand grinder. The grinder wheel struck the employee, breaking the employee's femur. The employee was hospitalized.",1
An employee was chopping cilantro with a chef's knife. The knife amputated about 1/4 inch of his right index fingertip.,0
"A public safety officer was responding to a motor vehicle accident. An electric crosswalk signal had been severed at the base and suspended over the road by a single cable. While trying to move it so it would not fall onto the road, the officer was shocked, suffering pain and numbness in his left ring and little fingers.",1
"An employee was bringing a high chair to a table when she stumbled and fell to the floor, hitting her face and arm. She was hospitalized with a broken nose, broken ribs, and a shattered elbow, requiring surgery.",1
"An employee fell approximately 15 feet from a roof onto stored material on the ground, suffering a broken arm, rib, and foot. The employee was hospitalized.",1
"An employee was operating an electric pallet jack when it struck another forklift. The employee was ejected and crashed into the floor, suffering a deep gash to the left thigh and lacerations under his chin and on his ear.",1
"An employee was grinding down a casting when the grinding wheel exploded, striking and cutting his left leg. He fell backward and broke his tibia in two places. He was hospitalized, undergoing surgery.",1
An employee was trying to remove a chip tray from the bottom of a drilling machine. The machine injured the top of the employee's right hand and the tips of four fingers.,1
"On September 25, 2019, an employee was on a roof of a commercial metal building, straightening out the roofing insulation. He fell though the roof to the concrete floor 16 feet below and hit his head on a steel girder, suffering head trauma. He was hospitalized.",1
"An employee took a drink from a water bottle and his mouth and throat started burning. The water bottle contained a chemical instead of water and the employee suffered chemical burns to the mouth, throat and esophagus.",1
An employee was operating a flexible-shaft grinder. Fan blades inside the machine's motor caused the partial amputation and non-displaced fracture of his left middle finger.,0
"Three employees were removing and cleaning equipment and fixtures and tidying up a restaurant that had been closed recently. A gasoline-powered pressure washer was in use near the back door of the restaurant. Carbon monoxide from the machine entered the building, causing all three workers to become lightheaded. One of them lost consciousness and was hospitalized.",1
An employee was cutting and draining a pipe that connected to a mixing tank when an unknown corrosive liquid caused a chemical burn to the employee's lower right leg.,1
"An employee was retrieving something from the top shelf of a shelving unit. The employee fell, and the top shelf caught her ring and pulled her finger off.",0
"On September 25, 2019, an employee was pushing a rail cart (holding steel) through a single exit door. The cart became jammed in the doorframe. The employee's finger was caught between the doorframe and the cart, and the employee's right little fingertip was amputated.",0
An employee was blowing out a clogged grease line. The line burst and the grease caused second-degree burns to the back of the employee's neck and both ears.,1
"An employee had been doing lawn care work when he felt pain in his abdomen that radiated to his hip and right leg. He developed a rash and was hospitalized, suffering from cellulitis.",1
"On September 25, 2019, an employee was working at a metal detector in an icings, fillings, and mixes room. As the employee was removing product, a valve closed on the top of the employee's left middle finger, amputating the fingertip.",0
"An employee was inspecting fan belts and bearings. The employee's right middle finger was pinched between the belt and the sheave, causing the amputation of the fingertip.",1
An employee was riding a company owned shuttle bus from the hospital building to a personal vehicle located in the company parking lot. The employee slipped on the steps while exiting the shuttle bus and fell. The employee was hospitalized for a right hip fracture that required surgery.,1
"An employee was clearing a film jam on a bagger. The bagger's jaws closed on the employee's left index finger, causing an amputation. The machine was guarded at the time of the incident.",1
"An employee was walking down stairs while exiting a freezer. The employee fell. The employee's head struck the walking/working surface, causing brain bleeding.",1
"An employee was using an overhead crane to lift a 1,000-plus-pound roll (in a cardboard box, with a piece of wood blocking the center of the roll). As the roll was being lifted, it shifted and started to fall. The end of the roll struck the employee's left middle finger, causing a soft tissue amputation to the fingertip.",0
"An employee was moving a patient when he felt a pop and burning in his abdomen, followed by stomach pain. He was hospitalized with an umbilical hernia.",1
An employee was cutting a pressurized 16-inch PVC water line with a chop saw. The line exploded and the employee suffered a fractured pelvis and other injuries. He was hospitalized.,1
An employee was moving a skid steer fork attachment that was on a trailer. The attachment rocked back and pinched the employee's left middle finger between the forks and the trailer. The fingertip was amputated.,0
"An employee was standing next to a pile of mortar bags. An excavator struck the employee, breaking the employee's right leg.",1
"An employee was cutting pork on a slicer. The blade caught the employee's glove/finger, causing a partial amputation to the employee's right index finger.",0
"An employee was installing fall protection anchor points on a roof. The employee fell to the ground about 20 feet below, breaking both legs.",1
An employee was using a T-post driver to set posts around a proposed excavation site. The employee's right thumb was crushed between the driver and a post. He was hospitalized.,1
An employee was hit by a fleeing shoplifter's vehicle and sustained an injury to her head.,1
An employee was trying to remove a rattlesnake from a worksite when it bit him.,1
An employee tripped over a doorstop while walking into a door walkway. The employee fell to the ground and suffered a hip injury.,1
"An employee was checking the source of dripping water on dust collector equipment after cleaning, before production start up. While the employee's right hand was below a vacuum air rotary valve on the bottom end of the dust collector's filter unit (about 3 feet above the floor), air flow moved the employee's right middle finger upward into an internal rotating component. The employee's fingertip was lacerated.",1
"On September 25, 2019, a warehouse worker was picking up products on the floor when a forklift struck his right ankle while turning into a rack slot. The employee's right ankle was broken. He was hospitalized.",1
An employee slipped and fell from the forks of a powered industrial truck to the concrete ground. The employee suffered wrist and head injuries.,1
An employee was walking through a warehouse when a forklift ran over her right ankle. She was hospitalized.,1
An employee was scraping the underside of a conveyor when his right arm was pulled into the roller. Both bones in the forearm were broken.,1
"An employee was refueling a small boat. The employee was checking the battery connections to the fuel pump when gasoline vapors flashed, causing second and third degree burns to the employee's arm and head. The employee was hospitalized.",1
An employee 's left thumb was caught in a safe door as it closed. He suffered an avulsion to the thumb tip.,1
An employee was back-stocking merchandise and fell off a ladder. The employee suffered a broken leg and displaced knee.,1
"On September 25, 2019, an employee picked up a container of product and suffered a disc herniation and arm numbness.",1
An employee was loading food into a dumbwaiter. The dumbwaiter's doors smashed the employee's right thumb while closing.,1
"An employee was operating a side puller that removes animal hides when his hand was caught in the gripper, resulting in amputations of the fourth and fifth fingertips.",0
An employee was hit by a pallet jack while operating a forklift. The employee suffered a broken collarbone and was hospitalized.,1
A truck driver was using a supermarket restroom when someone stabbed him in the right shoulder and right side. He was hospitalized.,1
An employee was entangled in the cable for a crane when the grapple shifted. Both of his legs were amputated.,1
"An employee was repairing siding on a residential home. As the employee was climbing down the ladder, it slid out from under him and the employee fell onto the wooden deck. The employee suffered a hip injury.",1
An employee was moving a stand-up forklift off a dock leveler when the forklift drove off the dock. The employee jumped from the forklift and landed on the concrete ground approximately 4 feet below the dock. The employee suffered a broken right leg just above the ankle.,1
"An employee was closing a window blind in a nursing resident's room. The blind pulled out of the snaps and separated from the holder, falling and hitting the employee in the head. The employee suffered a concussion and a laceration to the right eye, requiring stitches.",1
An employee had an asthma attack at work after breathing in a chemical in the floor wax.,1
"A wire used for towing wrapped around an employee's lower leg, breaking it. The employee was hospitalized.",1
"An employee was sorting on a conveyor line. PVC mini blinds were coming down the belt when one became caught in the belt and then struck the employee in the center of his chest, causing contusions.",1
"An employee was standing on top of a 7-foot-tall machine, cleaning it. He fell off the edge and landed on the ground, suffering two fractured vertebrae in his neck, a fractured left radius and left wrist, and head lacerations.",1
"An employee fell out of the bucket of a mini-loader and was run over, suffering a broken right leg.",1
"An employee was operating a machine when the tip of his glove became caught in the rollers, resulting in the amputation of his left small fingertip.",1
"An employee tripped and fell while walking, striking their right elbow on a pipe. The employee was hospitalized.",1
An employee was checking to see if feed was coming out of a machine when the fins on the feeder amputated her third and fourth fingers at the first knuckle on the left hand.,0
"Four employees were working on cable pairs, doing aerial work. One of them was 20 feet up on a ladder that was leaning on a strand. The strand gave way and the employee fell with the ladder, suffering a closed fracture of a lower-back vertebra.",1
Doors fell over an employee while being unstrapped. The employee suffered lacerations to an ear.,1
An employee fell forward as he stepped up from the dirt to a concrete pad. He hit a steel wall and suffered a dislocated right shoulder and a severe laceration on the right elbow.,1
"An employee was troubleshooting the waste conveyor of a flatbed die cutter, trying to find a squeaking roller. His right hand was caught between a roller and the belt. He suffered a fracture to the neck of the fifth metacarpal bone, requiring hospitalization.",1
An employee was working on an overhead walkway when the employee fell approximately 20 feet through grating to the concrete floor of an empty water tank. The employee broke both ankles.,1
An employee was attempting to realign the overwrap on a muffin overwrap machine when the employee's right middle fingertip was amputated by the machine's jaws. The machine was guarded at the time of the incident.,0
"An employee was using a drill with a brush attachment. The power cord wrapped around the tool, causing amputations to the employee's right-hand fingers at the first joints.",0
"An employee was replacing a bearing on a pulley. While the employee was lifting the centering roller, the conveyor belt pinched the employee's left middle finger. The finger was surgically amputated at the first digit.",0
An employee was evaluating metal floor grates in a stairway platform. The employee attempted to reset a metal floor panel in the stairway platform when the grate broke free. The employee's thumbs were crushed between the dislodged grate and a cement step. Both thumbs were amputated.,1
"An employee was standing next to scaffolding, waiting for a concrete pour. A wheelbarrow, being used to move bricks from one side of the scaffolds to the next, became unbalanced. It leaned sideways and the top layer of brick fell out of the wheelbarrow and off the scaffold, striking the employee about 45 feet below. The employee suffered a broken left humerus.",1
"An employee was helping a millwright install the bottom block of the wire-pulling device on a wire-drawing machine. The employee was holding onto the 400-600 pound block, trying to straighten it so it would continue traveling down its shaft. The block unjammed and traveled 4-5 inches, injuring the employee's left middle finger in the nail area. The injury resulted in an amputation above the first knuckle.",0
"An employee was moving a 40-foot-tall scaffold with rollers. The scaffold rolled over the employee's foot, causing lacerations and possible fractures.",1
"A burst of chemical mixture splattered out of a foamer system. The foaming solution hit an employee in the face, causing throat and eye irritation.",1
An employee was moving mail across the work floor when a reversing forklift struck the employee. The employee suffered lacerations to the face and a broken ankle.,1
"An employee was slitting a roll to a smaller size using a slitter. The employee's arm was pulled into the slitter, causing fractures to the right ulna and radius. The employee was hospitalized, requiring a surgical plate for one shattered bone.",1
"An employee was attempting to hold a load-out hose when its valve opened, releasing pressure. The hose struck and broke the employee's lower right leg.",1
"An employee was cutting into a shock absorber under pressure when a projectile struck and fractured the employee's arm, requiring hospitalization.",1
An employee was caught between two electric pallet jacks when one of them began moving. The employee suffered a broken right foot and was hospitalized.,1
"An employee was trying to put a numbered pinny on a person walking a horse as they were entering a paddock area before a race. The horse startled and kicked the employee in the face, breaking the employee's jaw. The employee was hospitalized.",1
"A truck driver was mixing oil (heated at about 375-380 degrees) in his truck for road work. The oil sprayed the driver, burning his neck, forehead, and lower arms.",1
"An employee was lowering supplies onto a truck and buggy drill. The employee slipped and fell onto the truck bed/rail, suffering broken ribs.",1
An employee was operating a paper folding machine when it pinched her finger. The tip needed to be amputated.,1
"An employee fell from a fixed ladder to the ground, losing consciousness. The employee was hospitalized.",1
"An employee was walking from the parking lot to her building to report to work. She lost her footing on a 6-inch step and fell to the concrete surface, suffering a broken left hip, a broken rib, and two fractures in her lower back.",1
"An employee was using a rebar bending machine. The machine activated, catching the employee's left hand in a pinch point. He suffered an amputation to the left ring finger and was hospitalized.",1
"An employee was cutting wooden strapping for ceilings when a board kicked and the employee's hand struck the blade, resulting in severe hand/finger lacerations. The employee was hospitalized.",1
"An employee was cutting a 2-by-4 with a circular saw. The saw kicked back out of the cut, causing the blade to cut through the employee's glove, cut the back of the employee's left hand/thumb, and broke the thumb. The employee was hospitalized.",1
"An employee was operating a forklift, unloading a bobtail truck. The truck's back door had been unlatched and was being raised when the door handle caught the employee's finger. The employee suffered an amputation to the left index finger/left hand.",1
"An employee was cleaning a line while waiting for maintenance to repair the machine. When she tried to remove scrap product from a roller, the cutter belt crushed her left arm, causing multiple fractures to her fingers.",1
"An employee was operating a skid steer loader. The loader fell into a pit and the employee suffered broken ribs, a broken left hand, and a collapsed lung.",1
"At about 10:15 a.m. on September 26, 2019, an employee was helping to set a manhole section on a site. The hook keeper on the chain sling broke, causing the manhole section to drop. The employee's left index finger and thumb were pinned between two manhole sections, suffering severe trauma.",1
"An employee was riding in a golf cart when she fell off the cart and hit the ground, injuring her head and requiring hospitalization.",1
"An employee was using a table saw to cut a wood skid when the saw blade caught the employee's finger, resulting in a left pinky amputation.",0
"An employee was mounting tires on a machine. The machine caught and tore the employee's left index finger, causing a partial amputation.",0
"An employee was operating a machine that applies coating to metal sheets used in the manufacture of steel pails. The employee attempted to clean the rear of a catch tray with a wiping rag. The rag entered a gap between the tray and the composite roller and became caught in an in-running nip point between two rollers. The employee's right hand was pulled into the rollers, resulting in a crushing injury. The machine was in motion at the time of the incident.",1
An employee was backing a mini-excavator out of a bay. The machine rotated and pinned his head between the cab and the bay door frame. He was bleeding from the ears. The employee was hospitalized and needed surgery to relieve pressure on his brain.,1
"During his shift preparing cars for drivers outside in the sun, a temporary employee began to feel unwell. He was hospitalized, suffering from low blood pressure and heat exhaustion.",1
An employee was using an industrial paper cutter to trim labels and amputated his left index fingertip.,1
An employee was using a crowbar to lift the bottom mold to reach under it and screw on the eye bolt. The crowbar kicked out and the mold fell on the employee's left index finger causing a partial amputation.,0
"An employee was climbing down a vertical ladder inside a tunnel pit. He fell about 10 feet to the bottom of the pit, landing on a steel plate and suffering fractures to the left and right foot and ankle.",1
"An employee was operating a tube cut-off machine when there was a mis-cut resulting in a longer piece of tubing exiting the machine. The operator saw the mis-cut and reached to remove the tubing. The next tube to be cut struck the end of the tube the operator was trying to remove, causing the employee's fingers to be pinned between the end of the tube and the exit chute. The employee sustained amputation of his left index finger.",0
"An employee was moving a piece of equipment using a forklift and sling. The equipment spun and struck the employee on the left hip, breaking the employee's pelvis.",1
"An employee was standing between a forklift and an elevated bucket while trash was being dumped. The forklift operator drove the forklift into the employee and struck the employee's cell phone. The cell phone exploded, and the employee was pinned between the forklift and the wall. The employee sustained cuts and burns to the left gluteus.",1
"An employee was driving a golf cart. The cart ran into a trailer, which knocked another trailer over. The employee was injured and was hospitalized.",1
Two employees were backing out a landing joint from a hanger using two chain tongues on each side. One of the employees suffered a back injury while pulling the equipment. He was hospitalized for a ruptured disk.,1
"An employee was stenciling a roll of toilet paper on a tissue machine and went to remove the roll when his right middle finger was pinched between the pusher and paper, resulting in a fingertip amputation.",1
"An employee was installing solar panels on a two-story residential house when the employee fell off the roof, suffering a broken pelvis, a broken wrist, broken ribs, and internal bleeding. Fall protection was not worn at the time of the incident.",1
"An employee was loading an excavator onto a lowboy trailer. The employee's hand slipped while securing the thumb/bucket and the bucket fell on the employee's hand, crushing the fingers.",1
"An employee was trying to free a chain from the end gate of a truck. The gate slammed shut on his left middle finger, amputating it.",0
An employee suffered a fingertip amputation.,0
An employee was operating a forklift when the forklift went off the road. The employee jumped from the forklift and was crushed by the forklift from the waist down.,1
"On September 27, 2019, an employee's stand-up tugger was hit by another stand-up tugger. The employee fell to the ground when the tugger was hit. The employee was hospitalized with abdominal and left foot pain.",1
"An employee was removing wood from behind a conveyor. The employee's hand struck the steel conveyor framing and the employee's lower left arm was broken. The employee was hospitalized, requiring surgery.",1
"An employee was operating a bar bending machine when his finger was caught between the rebar and mandrel bender wheel, resulting in a right index finger amputation just above the first digit behind the fingernail.",1
"An employee slipped and fell while walking down steps, fracturing the left ankle.",1
"An employee was striking a suspended basket filled with bolts with a stick when a 48-inch anchor bolt flew out of the basket and struck the employee in the forehead, causing severe injury to the frontal lobe.",1
"An employee tripped over a water hose and fell to the floor, suffering a broken right femur.",1
"An employee was bending a 2-inch by 8-inch piece of metal with a press brake. The brake activated, causing partial amputations to all four fingers on the employee's right hand.",0
"After installing scenic cabling into a concrete wall, an employee was descending a ladder when he lost his balance and fell. His right foot went between the first and second rungs of the ladder as he was falling, resulting in a broken right ankle.",1
An employee picked up a beverage bottle that had previously fallen from a janitor's cart and drank from it. The bottle contained a blue liquid that was a disinfectant cleaning solution. The employee suffered chemical burns to the throat and esophagus and was hospitalized.,1
"An employee was attempting to move or operate an electric pallet jack parked near a doorway when she was struck/crushed by the pallet jack. She sustained multiple fractures in her right leg, requiring surgery and hospitalization.",1
"An employee was painting from an extension ladder. The ladder fell and the employee fell with it, landing on the ground and suffering a broken nose, right wrist, and knee. The employee was hospitalized.",1
"An employee was using an overhead crane with slings to separate granite slabs and inserting spacer blocks between the slabs. As the employee was inserting the spacer, the sling slipped, causing the slab to close against the separator block. The employee's left index finger was crushed between the slab and spacer block, resulting in a fingertip amputation.",0
"An employee was installing a rubber band/gasket, on a battery-operated portable band saw, for the cutting blade to travel on, when his right index finger was caught by the rubber band/gasket, resulting in a fingertip amputation (no bone).",0
"An employee tripped over a pallet, fell, and fractured their right wrist on the concrete floor.",1
An employee was exiting a semi deck when he fell from behind the semi cab and fractured his wrist and vertebra.,1
"An employee was moving shoring jacks on a construction site when the employee's right middle finger was caught in a pinch point on the shoring machine, resulting in a partial finger amputation.",0
"An employee was working on a hook lift roll-off truck. The employee tapped a steel plate with a hammer on the truck to get it to move and the plate dislodged, pinning his right hand and causing multiple fractures.",1
"While performing cleanup operations at a job site, an employee became ill due to direct sun exposure, requiring hospitalization for heat stress.",1
"An employee was loading a trailer. A cart crashed into a pallet jack and the employee's finger was crushed between the two, causing a fingertip amputation.",0
An employee was installing flashing and fell from a second-story roof to the ground and landed on their back and head. The employee was hospitalized.,1
"An employee was getting a case of cooking oil off a storage rack to fill an order. As he pulled the case of cooking oil and twisted to place it on the cart, he felt and heard a pop in his hip. He sustained a broken right hip.",1
"An employee was running the flex line in the re-hang department. While removing a chicken wing, the employee's hand was caught and the left middle finger was amputated by the wing saw.",0
"An employee was loading boxes onto a mobile cart. After lifting a box, the employee suffered pain in the left side of their neck.",1
An employee was cutting the straps off of a bundle of wood in the lumber drive-thru when the knife went through a strap and caused a laceration and puncture to his left wrist.,1
"While cutting a cardboard box with a safety knife on the receiving dock, an employee cut his left arm. The employee was hospitalized and required surgery for a severed artery.",1
An employee was helping a crane operator reposition a manhole cover when the hook of the crane broke. The employee suffered a left middle fingertip amputation.,1
"An employee had delivered mail to a residence and was walking back to his vehicle when a dog pushed through a security screen and attacked him. He suffered a severe dog bite on his left hand, requiring surgery.",1
An employee was cutting wood with a jig saw when the blade hit a nail. The saw jumped and the blade contacted an artery in the employee's wrist requiring hospitalization and surgery.,1
"An employee was pulling tills out of a safe when she backed up and her foot was caught on the carpet. She fell backwards to the floor, fracturing her hip and requiring surgery.",1
"On September 28, 2019, an employee was centering a print screen on a machine when the employee's right pinky finger was amputated above the first joint at the point of operation.",0
An employee was using a stand grinder to bevel a small piece of pipe in preparation for a welding test. The grinding wheel contacted his left middle finger resulting in a partial amputation.,0
"An employee was turning on a portable burner when a flash fire sparked due to a punctured butane can. The employee received severe burns to his face, chest, and arms.",1
An employee was repairing a mud flap on his truck while it was raining. Lightning struck in the area and the employee sustained tingling of the right side.,1
"After using a hose to transfer asphalt from a distributor to a holding tank, an employee was removing the hose when the asphalt splashed him, burning his face, neck, arms, chest, and stomach. He was hospitalized.",1
"While on a ladder, an employee was going to do a line break on a 2-inch PVC line of bleach (16% sodium hypochlorite) in order to repair a leak. The line was 8 feet above the ground. When the 2-inch PVC  line was cut, the employee came in contact with the bleach, sustaining chemical burns on the upper body. The employee was hospitalized.",1
An employee was using a walk-behind powered industrial truck (PIT) to move pallets onto a rack. The PIT ran over his foot fracturing his left big toe.,1
An employee was standing on the side of a skid plate while waiting for a welding box to be delivered. A second employee was driving a golf cart to bring the first employee the welding box. The welding box fell onto the accelerator pedal while the driver was approaching the first employee. The golf cart then struck the first employee on the back of his right leg and pushed him onto the skid plate. He sustained a fractured leg.,1
An employee was walking through an area with her supervisor when her leg made contact with a guarding sensor used to protect automobiles from contacting equipment. She fell to the floor and broke her left femur.,1
An employee was carrying out trash when she lost balance and fell onto the dumpster. She then fell backward striking her head on the ground. The employee sustained a head injury.,1
An employee was hospitalized after receiving a bite from a cat undergoing veterinary care.,1
"An employee was releasing a chain clamp on a two-way spreader used to lower a sheet pile when his finger was pinched between the chains and the sheet, resulting in a right index finger amputation.",0
"An employee was draining waste vegetable oil from a fryer. The employee opened the spigot and allowed the used oil to drain. He shut off the spigot after the bucket was about 3/4 full and emptied the bucket into the 50-gallon wheeled collection bin. A fire started in the fryer and hot oil was expelled over the employee's feet, burning them.",1
"An employee was walking to put something away when the employee tripped on a bench and fell the ground. The employee suffered a fractured right hip and possible head contusion, requiring hospitalization.",1
An employee's fingertip was amputated by a door's hinge as the door opened.,0
"An employee was reaching for a pan on a shelf when a few other pans began to fall. She turned around in a hurry to catch them and tripped and fell, fracturing her right ankle.",1
"An employee was walking toward the office when he tripped over a tote of merchandise and fell to the floor, fracturing his hip.",1
"An employee was walking at a customer's garage when she lost her balance and fell to the floor, breaking her hip and femur.",1
"An employee was removing a tire from a rim using a tire machine when the employee's left middle finger was pinched in the tire machine, resulting in a fingertip amputation.",0
"An employee was unlocking a saddle so it could latch around the pin that was holding it in place. When it was unlocked, it released down and caught and amputated the employee's left middle fingertip.",0
"An employee fell 14 feet to the ground while working on metal decking, suffering head injuries and fractured bones.",1
"An employee was using a nylon strap to dislodge an internal clamp from a pipe when the nylon strap broke, allowing a metal rod being used to pull the clamp to swing and strike the employee's head.",1
An employee was troubleshooting the robotic welder. The employee was attempting to access the alignment of the welding tips when the pneumatic solenoid activated and his right index finger was caught between the welding tips resulting in a partial fingertip amputation.,0
An employee was making a delivery to a restaurant when an unknown insect bit or stung the employee. The employee developed an infection and was hospitalized.,1
"An employee was loading a compact utility loader onto a trailer. The employee slipped off a ramp and the loader fell on the employee's leg, pinning it against the ramp. The employee was hospitalized with severe lacerations to the lower leg.",1
"An employee was getting tools from a job box on a forklift when the employee fell approximately 15 feet to the ground below, suffering head injuries.",1
An employee was working on a concrete truck when the employee's hand was caught in a rotating mixer drum.,1
A logging employee was setting chokers when a log got hung up and the choker snapped back. The employee was hit by the choker and sustained seven broken ribs.,1
An employee became ill due to heat stress and was hospitalized.,1
An employee was using a jack hammer on the concrete floor on the upper level of the parking garage. The floor gave way and the employee fell. The employee was hospitalized for a concussion and fractures.,1
An employee standing in the bucket of a tractor was trimming trees and fell approximately 3 to 4 feet from the bucket. The employee was hospitalized.,1
"An employee was machining a round bar when a nest of shavings started to build up. He reached over to turn the machine off when the shavings cut his left wrist, requiring hospitalization.",1
"On 9/30/2019, an employee was walking when their foot caught on a floor tile that was slightly raised. The employee tripped and fell, hit their head, and was hospitalized.",1
An employee's left middle finger was amputated after becoming caught in a door.,0
"On 9/30/2019, an employee was performing preventive maintenance on the conveyor belt to a shirt press. The moving conveyor amputated the employee's middle fingertip.",0
An employee was operating a skid steer when his right foot became stuck and was crushed between the bucket and a machine.,1
"An employee stepped up onto the right side of a trailer's tire bar, which is 24.5 inches high, to set a deck pin. When the employee stepped back down, his left ankle twisted on the asphalt, causing him to fall on his back and strike the back of his head on the asphalt. He suffered a concussion, a laceration to the back of his head, and a sprained left ankle.",1
"An employee slipped and fell on the ground, fracturing his right hip.",1
"On September 30, 2019, an employee fell from a moving escalator during cleaning operations. The employee fractured his C-2 vertebra and was hospitalized.",1
An employee was on a ladder removing product from a shelf when the shelf collapsed and threw the employee from the ladder to the floor. The employee was hospitalized for a broken right elbow.,1
An employee was putting napkins into an ironer machine when her left hand was caught on the rotating shaft and injured.,1
"An employee was operating a standup powered industrial truck when he struck against the beam of a rack system, suffering broken ribs.",1
"An employee was on a 28-foot ladder, installing cable on a pole on the street. The employee lost his grip on his meter, his left foot slipped, and he fell from about halfway down the ladder. The employee was injured and hospitalized.",1
An employee was assisting co-workers with installing a 5x10-foot glass whiteboard. The employee's fingertip was amputated by a sharp piece of metal backing that was on the whiteboard.,0
"An employee was tying illumination electrical branches to an emergency system when the employee made contact with an energized source, suffering a 277-volt electric shock.",1
"An employee was operating a forklift when the forklift tipped over. The employee's left leg and left hand were pinned under the forklift. The employee sustained a broken finger, torn ligaments, and a hyper-extended knee.",1
"An employee was preparing to perform maintenance on a reach truck. While standing on the forks of the truck, the carriage lowered and struck the employee in the abdomen. The employee sustained injury to the intestines.",1
An employee was pressure washing and lost control of the belly pan and the hold-down loop which smashed their finger. The first digit of the right pinky finger was amputated.,0
"On September 30, 2019, an employee was moving a microscope when he dropped it on his foot. He was hospitalized and required surgery for a foot injury.",1
An employee was cutting multiple wood 2x4's using a circular saw and amputated the left index finger above the first knuckle.,0
"On 9/30/19, an employee went up the ladder of a separator tank. He was on top of the ladder when a pop-off valve released. He was exposed to gas and lost consciousness, falling 20 to 30 feet to the ground. He was hospitalized with a fractured left fibula, fractured right hip, and ruptured kidney.",1
"An employee was using a forklift to lift a splice box from a pit when the forklift tipped over into the pit. The employee was pinned against the splice box, suffering a fractured left forearm and elbow.",1
An employee was changing over a jig cart. The lock pin to hold the jig in place would not advance through the plate on the jig. When the lock pin became unstuck it crushed the employee's right middle fingertip resulting in an amputation.,0
"An employee was working as a catcher, approximately 30 feet from the lumber molder machine. While the machine was idling, the employee was cleaning up behind the machine using an air hose and nozzle. At some point, the bottom head of the lumber molder machine activated and amputated the employee's right thumb and index finger from the middle knuckle up.",1
"An employee was cutting small-diameter trees and shrubs with a chainsaw when he slipped on rocks. The saw contacted the bottom of his chaps, pulling them away from the back of his leg. The saw then contacted the back of his leg and cut his calf, requiring hospitalization.",1
"An employee was building an 18-inch channel block in press brake. As he was making the second bend, his left hand went into a pinch point. The machine cycled and caused the amputation of three fingers on the left hand.",0
A temporary employee was operating a lawn mower when they slipped on wet grass and their right foot contacted the mower. The employee sustained a laceration to three toes and was hospitalized.,1
"An employee was descending in a boom lift when the lift jolted and the employee hit his head on steel, sustaining a laceration by his ear and a vertebra injury.",1
An employee was operating a welding machine when their right middle finger was amputated by the machine.,0
"While operating a walkie rider pallet jack and coming out of an aisle, a temporary employee collided with a reach forklift. The temporary employee was thrown from the walkie rider to the floor, suffering a back injury and broken leg. The temporary employee was hospitalized.",1
An employee was riding one of the horses at the stables and the horse bucked her off. The employee landed on the ground and was hospitalized with a fractured pelvis and tailbone.,1
An employee was maneuvering a full 55-gallon drum of antifreeze. The employee went to let the drum back down to the floor and their right pinky finger was smashed between two 55-gallon steel drums. The right pinky fingertip was amputated.,1
"An employee was using a hand tool to remove a fitting from a hot water heater when the employee's right hand slipped and contacted a razor knife, lacerating the right hand in the wrist area.",1
"An employee tripped while heading into a hallway and fell to the floor, suffering a broken left femur.",1
"An employee was performing maintenance on a steam valve when he was sprayed by the steam, receiving first and second degree burns on the arms and chest.",1
An employee was hospitalized after feeling dizzy and short of breath.,1
"An employee fell off a flat roof or ladder while reaching for a paint sprayer, suffering a sprained left knee, dislocated left hip, and broken right ring finger.",1
"A trench collapsed, trapping an employee inside. The employee suffered liver damage and three fractured vertebrae.",1
"An employee was adjusting an air cylinder clamp on a table router. The clamp moved and struck the employee in the head, lacerating it.",1
"An employee was providing maintenance on a primer paint booth when a drum up-ender came down on his hand, breaking his ring finger.",1
"At about 3:30 p.m. on October 1, 2019, a processing blender was changing a soft-drink-making system over from clean-in-place to production. After he broke the line, the system discharged cool water (due to condensation), then steam. He suffered first- and second-degree burns to the chest and back and was hospitalized.",1
"A temporary employee was putting an 80-pound section of steel into place. The steel dropped onto him, breaking his wrist and ankle.",1
"An employee was using a lifting magnet to lift a plate when the metal plate fell and crushed the employee's left index finger and thumb, resulting in fingertip and thumb tip amputations.",0
"An employee was in his vehicle, making a package delivery, when someone robbed him and shot him with a shotgun. He suffered a gunshot wound, with a spray of pellets and debris affecting multiple parts of his body and body systems.",1
"An employee used a bar stool to get on a bar top and dust light fixtures. After she finished cleaning, she jumped down from the bar and landed on the floor, breaking her right tibia/fibula.",1
"An employee was dismantling a machine in order to clean it. He was pulling out a star blade when the edge of the blade cut his right middle fingertip, resulting in a fingertip amputation.",0
"An employee was walking toward a home when the employee tripped, fell, and broke the left arm.",1
"An employee was driving a stand-up reach forklift and struck an interior drywall, lost consciousness and had a seizure.",1
"An employee was operating a magnetic drill to drill holes into flanges. After drilling and creating metal shavings, the employee utilized his left hand to wipe away the shavings. The employee's glove made contact with the drill, pulling his left hand into the drill and resulting in an amputation to the left ring fingertip.",0
"An employee's finger was caught between a belt and pulley while he was installing a new belt on a machine, resulting in an avulsion to his left ring finger.",1
"While walking out of an office, an employee tripped on a bag and fell to the floor. The employee's hip was broken.",1
"An employee was cleaning a pour hole in a foam mold when the pour hole lid trapped the employee's hand, resulting in avulsions and lacerations to the right-hand fingers.",1
An employee was loading a trailer when the employee's right leg went through a hole on the trailer floor. The employee's right leg and ankle were injured.,1
An employee was placing the wire from a capstan onto the empty take-off spool of a mill machine when the employee's left index fingertip was caught in the wire and amputated.,1
"An employee slipped on the grating of a containment sump and fell. The liquid in the sump splashed on him, causing second-degree chemical (dimethyladamantylamine) burns to his buttocks, hamstrings, and left leg.",1
"A stagehand was unloading a truck to set up for a show. The lift gate got stuck, then fell on the employee's left big toe, resulting in a partial amputation.",0
An employee was pre-drilling holes into steel siding with a handheld cordless drill. The employee's left glove got caught on the drill bit and wrapped around the bit with the employee's thumb still inside. The outer cutting edge of the drill bit amputated the thumb.,1
An employee fell from a ladder while climbing down it. The employee suffered a hand injury and was hospitalized.,1
"An employee was trying to stop cases from falling and was forced to jump about 8 feet to the floor, suffering a broken right ankle. He was hospitalized.",1
An employee suffered a 480-volt shock while investigating a power outage in a production area.,1
An employee was setting up his outdoor vending cart when he brushed against a frayed electric cable and was shocked. He was hospitalized for bradycardia.,1
"An employee was operating an aerial lift to perform maintenance on a plant lime silo when he made contact with the silo support brace. During this contact, his right index finger was pinched between the top rail of the lift and the support brace, resulting in a laceration and break of the first knuckle.",1
"A bundle of aluminum planks was being placed on a structural steel ramp. The tagline from the tower crane got stuck underneath the bundle. The bundle was lifted. When it was set down, it caught an employee's finger, causing the amputation of the fingertip.",0
"An employee fell from a ladder while installing a gutter at a private residence, suffering a left knee injury.",1
An employee was training on how to operate a forklift. The employee's finger was caught and crushed against a fixed metal rack. It was later surgically amputated.,0
"An employee tripped over a floor bolt and fell, suffering a fractured neck. The employee was hospitalized.",1
"An employee was attempting to troubleshoot an issue with a shaker table that continued to break belts connected to the oscillator. The pulley turned and pulled the employee's thumb in between the sheave and the belt, resulting in an amputation to the right thumb above the knuckle.",0
"An employee was walking down a catwalk. At the same time, an automated system was cleaning and removing aggregate from the drag conveyor of asphalt equipment by spraying diesel fuel onto the conveyor. As the cleaning was taking place, the vapors from the diesel fuel ignited, creating a flash fire. The employee was burned on his face, neck, and arms, requiring hospitalization.",1
An employee was operating the cutting machine. As he was manually sliding the lift of paper into the cutting position he suffered a hernia.,1
"While cutting shrubs in a swamp, an employee lost consciousness due to heat-related dehydration.",1
An employee was driving a forklift when his foot was caught against a rail barrier and injured. The foot was surgically amputated.,1
An employee was climbing a scaffold ladder when he slipped and fell to the ground 4 or 5 feet below. He suffered a broken femur.,1
"A temporary employee working for Stellar Staffing, LLC, was cleaning up around a depalletizer. He was recovering empty bottles that had accumulated in the depalletizer when it caught and crushed his right arm, breaking it.",1
An employee's hand was in the door frame near the hinges when the door closed on her hand and amputated her fingertip.,0
An employee was working to erect a wind tower when he was struck on the hard hat by a bolt that was dropped from above. He suffered a skull fracture and was hospitalized.,1
"An employee was doing a roofing work on a new single-family home when he slipped and fell about 9 feet, fracturing his hip. His harness was not connected to a life line at the time of the incident.",1
"On October 2, 2019, an employee was adjusting the torque on a bottle-capping machine. His right index finger was caught in the running belt and pulley and the tip was amputated at the first joint.",0
An employee was observing the loading of a hopper truck with pet food while standing on the mid-rail. He hopped backwards from the mid-rail coming in contact with the end of a probe.,1
"An employee was moving an air compressor. It shifted and pinned the employee's left leg against the concrete, lacerating it.",1
"An employee was exiting the tractor of a semi truck when he fell to the ground, suffering a broken hip.",1
"An employee was slicing ham on a machine. When she went to get the ham, the machine was still running and the slicer cut off part of her thumb.",0
An employee was hospitalized for heat stress after remodeling a store.,1
An employee was pulling a trash bag out of a container when an object protruding out from the bag punctured his right eye.,1
"An employee was reaching for a piece of chicken on the underside of a hopper conveyor belt when the employee's left hand was caught between the hopper conveyor belt and frame, resulting in an amputated index fingertip and avulsion of the nailbed and flesh.",0
An employee was working on a valve in an extrusion area. The valve amputated the employee's little finger.,0
An employee suffered heat exhaustion while hand digging a hole to install a meter on a house. The employee was hospitalized.,1
An employee was participating in a pre-operational startup of a fryer in the processing plant when the employee suffered an amputation of the left index fingertip and avulsion of the left middle finger. The fryer was not locked/tagged out at the time.,0
"An employee twisted his knee while pushing a pallet jack, suffering a contusion.",1
An employee descending the top segment of an extension ladder fell approximately 8 feet to the lower level when the ladder slipped out from underneath him. He was hospitalized with contusions to the right and left sides of his body.,1
"An employee climbed a dumpster to move a cabinet inside the dumpster to the other side when the employee fell from the dumpster to the ground, breaking the left patella. The employee was hospitalized.",1
"An employee was unloading equipment with a crane, hoist, and strap when the strap broke, gashing the employee's head and breaking the employee's right leg.",1
An employee was operating a boring machine. The drill amputated his left index finger.,0
"An employee was using tongs to run tubing. As the employee went to set the tongs on a post, the employee's right thumb was caught between the tongs and the post. The employee was hospitalized with a lacerated and fractured right thumb.",1
"An employee was walking down the hallway when she fell to the floor, fracturing her femur and radial neck.",1
"Employees were placing a temporary concrete barrier in a highway work zone. An 18-wheeler truck came into the work zone, hitting the truck carrying the barrier device and a barrier. This caused a barrier to fall on an employee's left foot. The foot was amputated.",0
"An employee was in a verbal altercation with a coworker. The site foreman intervened and the employee began walking away. As the employee was walking away, the coworker assaulted him from behind with a punch to the head. He lost consciousness and fell into hot asphalt that had been freshly poured nearby. He was hospitalized with burns to the left side of the face, the left shoulder, and left forearm.",1
An employee sustained a mandible injury upon striking a turn stile gate and was hospitalized.,1
An employee was using a table saw to cut wood when the saw blade partially amputated his left index finger.,0
"An employee was trying to unjam a tool. The employee's hand was caught between a conveyor and a belt, causing an injury that required hospitalization.",1
"An employee was pulling hose to fill a truck tanker trailer when he slipped and fell, striking the ground's asphalt surface. He injured his right hip, requiring surgery and hospitalization.",1
An employee was cutting frozen pork rib belly with a meat cutting band saw when the blade amputated his pinky finger at the knuckle.,1
"An employee was attempting to clear a jam in an aggregate conveyor when the employee's left arm was caught in the conveyor, resulting in a left arm amputation.",1
"An employee was loading a truck with a 10-ton overhead crane when his left ring finger was pinched between the bundle of steel and the truck, resulting in amputation of the left ring finger.",0
"An employee was working in a trench, using a spud bar to find the opening in a manhole to line up the next piece of pipe to connect. A steel plate next to the trench box fell on the employee's lower right leg, breaking it.",1
An employee suffered a broken left leg (above the ankle) while descending a ladder.,1
An employee was working on a 6-foot folding ladder when he fell 5 feet to the ground below. He was hospitalized with a broken left ankle.,1
"On October 2, 2019, at 12:42 p.m., an employee was walking into the casino for a menu tasting when he tripped on a metal brace for slot signage that was being installed and fell to the floor. Later, at approximately 3:00 p.m., he was found in the men's restroom experiencing shortness of breath and dizziness. He was hospitalized with an abdominal aortic aneurysm, collapsed lung, and an aneurysm of the right iliac artery.",1
"An employee was exiting a garbage truck to retrieve a garbage container when he was sideswiped by a motor vehicle, receiving fractures to the right foot, right elbow, and right ribs. He was hospitalized.",1
"An employee fell from the door of a truck cab to the ground and was knocked unconscious, suffering a head injury.",1
An employee was inspecting and fixing a tire on a tractor when the tire blew out and impacted the employee. The employee experienced internal bleeding.,1
"An employee was equipping himself to enter a trench. A water pipe and lid exploded after one bolt was loosened; the pipe struck the employee, breaking his leg.",1
"An employee was trying to remove a wood chip that was jamming a saw. After clearing the jam, the employee became caught in moving parts inside the saw and suffered amputation of his right index finger at the second knuckle.",1
"An employee was moving a bundle of angle iron with a hoist when the iron fell and crushed his foot, resulting in the medical amputation of the tips of two toes.",0
"An employee's right hand was injured by rotors inside a control panel. The employee suffered an amputation to the end of the middle finger as well as deep lacerations to the end of the index finger, the right thumb, and the right palm from the pinky finger to the thumb.",0
"An employee was cleaning an underground electrical vault. The employee was shocked, fell from the stepladder, and was injured. The employee's left hand was amputated due to the electric shock.",1
"An employee was replacing the belt of an air handling unit when his hand slipped and his left ring finger was caught in the in-running nip point of the pulley, resulting in a partial finger amputation.",0
"An employee was using a rope to pull himself onto a trailer to sweep. The rope came untied while the employee was pulling himself up, causing him to fall 3 feet to the ground and strike his head. He was hospitalized with a brain bleed.",1
"An employee was shutting a truck trailer gate while standing on the edge of the trailer. When the door was halfway down, the employee jumped down to the ground while still pulling the trailer gate with his right hand. His left hand rested on the trailer floor directly under the trailer gate, which came down on his hand, amputating the tip of his left ring finger.",0
"An employee was moving plywood to install scaffolding when the employee fell through a hole under the plywood, fracturing the collarbone, nose, and ribs and suffering bleeding on the brain.",1
"An employee was cleaning the belt to a metal detector. While she was cleaning underneath the machine, the roller to the belt grabbed the towel she was using and pulled her right hand and forearm into the roller, causing an open right upper extremity fracture. The conveyor was not turned off at the time of the incident.",1
"An employee was using a belt sander to grind down a thin disk. His right index finger was pulled into the sander, which ripped off the nail, skin, and some bone.",0
"An employee was retrieving a boat dolly to use in the lamination area when he mis-stepped and his left foot caught the underside of the dolly. The employee's left ankle twisted and his foot rolled, which caused a severe break, three fractures, and an ankle dislocation.",1
"An employee's hand was crushed in a vehicle door, resulting in a left pinky finger amputation.",0
"Employees were replacing stripping rubber. As they were pulling the line up with a lifting hook, the line became caught on a kick-out beam. When the line released from being snagged, it snapped up and the lifting hook struck the injured employee in the mouth. The employee lost three teeth, suffered a broken palate and maxilla, and had one tooth embedded into the roof of his mouth. He was hospitalized.",1
"An employee was attempting to clear a jam on an oil fill machine. He removed the washer and the slide released its stored energy. The slide piece then pinned his fingertip against the front metal slide, resulting in an amputation to the palm side of his right index finger just below the nail
bed.",0
"On 10/03/2019, an employee was lifting a roll with an overhead crane and adjusting the nylon rigging where it attached to the crane's hook when the employee's middle finger was caught in between the strap and the hook, resulting in a fingertip amputation.",0
"An employee slipped while walking, suffering fractures to the left arm and right leg.",1
"An employee was troubleshooting a film cutting machine. While adjusting the roller, his right index fingertip was amputated.",1
"An employee was changing a plastic wrap roll on a robo pack wheel and frame machine. The employee's left hand was pinched against a metal bracket, causing the amputation of the ring fingertip.",0
An employee was cutting pipes at the heat exchanger and using a portable hand grinder to replace damaged and clogged pipes. The grinder slipped and lacerated the employee's left bicep region.,1
An employee was driving a tug with a luggage cart attached. The employee lost consciousness and the tug drove into an airplane. The employee suffered broken ribs and internal contusions.,1
"A forklift operator was setting down a load of corrugated sheet steel when the load shifted. The injured employee attempted to manually stop the load from shifting. The employee's hand was caught under the shifting load, smashing the right middle fingertip and resulting in a fingertip amputation.",0
"An employee was loading cases onto a conveyor. While she was retrieving a pneumatic wand, the line started and her left hand was caught between the conveyor roller and chain. She suffered a broken index finger and an amputation to the middle fingertip.",0
"An employee was transitioning from a ladder to a scaffold when the ladder displaced, causing the employee to fall to the concrete floor and suffer fractured vertebrae.",1
An employee was using a circular saw to cut wooden stakes when the blade partially amputated the employee's left thumb pad.,0
"An employee was driving a stand-up forklift and carrying a load as part of his stocking duties. He was going down the same aisle as another employee that was also driving the same kind of forklift. The employee in front suddenly stopped and reversed with the forks in the high position, striking the employee that was behind him. The employee was hospitalized with puncture injuries to the right calf and main arteries.",1
An employee was tapping a hot water pipe to install a valve. An ice plug failed and the employee's upper body was burned by 180-degree water/glycol.,1
"An employee was struck by a forklift while walking in the warehouse, breaking the right leg and requiring hospitalization.",1
"An employee was cleaning a potato harvester with a pry bar. The conveyor moved and the bar struck the employee, causing multiple broken ribs, a bruised lung, cuts, and lacerations.",1
"An employee fell approximately 12 feet into an abandoned plating pit, suffering a leg injury.",1
"An employee walked into a fill room while a hot sanitation process was completing. When the hot water was sent to the drain, some of it sprayed out and hit the employees feet. The employee sustained a second degree burn to the upper left foot and the right heel, requiring hospitalization.",1
"An employee was standing on a bobbin to clear a blockage on an extruder. While she was clearing the block, the equipment cycled, causing a second degree burn on her right hand and pinning her between the extruder and the cage guard. She broke four ribs.",1
An employee was walking into a plant when he slipped on spilled liquid near a trash can. He fell to the floor and broke his right femur.,1
"An employee was sampling product as it came out of a piston filler machine when the machine struck her fingers, resulting in the amputation of the ring and middle fingers.",0
An employee stood on a wheeled office chair to dust and fell to the floor. The employee was hospitalized.,1
"An employee was operating a machine that removes the heads of fish when the blade cut the employee's right pinky finger, resulting in a partial finger amputation.",0
"An employee was rigging up his equipment in a pulling unit. The blowout preventer was opened, blew the slips, and hit the rig floor. The rig floor broke; the employee slid down the broken part of the floor and hit the slips on the ground. He suffered a lower back injury.",1
An employee suffered a partial finger amputation.,1
"An employee was walking on a stone surface at a job site. The employee fell to the ground, suffering a broken hip.",1
A Postal Service employee was delivering mail when he became ill due to possible heat-related illness.,1
"A conveyor was stopped, but then became unstuck and started moving. An employee's right hand was pinched between the conveyor and a support bracket on the side. A quarter-inch of the employee's index finger was amputated.",1
"Two employees were clearing a jam on a baler. Once the jam was cleared, both employees fell to the ground below. One of them landed on a concrete surface and suffered a back injury.",1
"An employee was standing on a pipe railing that was approximately 2 feet high while he was cleaning out a fertilizer blender. He slipped off of the rail and fell, resulting in three broken ribs and a possible punctured lung.",1
"An employee was running a wire re-spooling line into a 500-foot roll. His right ring finger got stuck between the guide and the plastic spool, and the fingertip was lacerated. It was surgically removed to the first knuckle.",1
"An employee slipped on a wet floor, suffering a broken right arm and dislocated right shoulder. The injuries required surgery.",1
"On October 3, 2019, at approximately 10:25 a.m., an employee was cleaning leaves from a residential street using a leaf blower when a passing vehicle struck the employee. The employee sustained fractures to the right leg and ankle.",1
"An employee was using a shear when his left middle finger was caught between the metal and the table being used to hold the metal, resulting in a partial amputation.",0
"An employee was pushing a die cart into position at a press machine. As the cart rolled into position, her left ring and middle fingers were crushed and broken between the cart and frame of the press machine.",1
"An employee was working on a lawnmower lifted by a jack. The lawnmower's front wheels fell off the jack onto the employee, who suffered a broken left forearm.",1
An employee was operating a table saw to cut plywood when the saw blade cut and amputated his left middle fingertip.,0
"An employee was selecting groceries in the warehouse when she lost her balance and activated her pallet jack, causing her to fall and fracture her left ankle.",1
"On October 4, 2019, an employee was pulling mufflers from a trailer parked against the loading dock and then stepped onto a 55-gallon drum filled with concrete to hand a muffler to a customer. The employee tripped and fell approximately 42 inches to the concrete driveway. The employee was hospitalized with a fractured eye socket, sprained wrist, twisted knee, and brain bleed.",1
An employee was operating a table saw when it lacerated his left hand.,1
"An employee was lifting wood panels and twisted his back, suffering a severe back strain.",1
"An employee was walking across a roller conveyor. As he was climbing down off the platform, he fell, hitting the adjustment bar on a packing machine and then the floor. He suffered broken facial bones around his left eye socket, bruised ribs on the left side, and bruises on his belt line.",1
"An employee was opening the bay doors in the morning. After hitting the button to open a bay door, her right ring and pinky fingers became wrapped in a loose cable of the bay door. As the door went up, she tried to free her fingers with her other hand, but her right pinky and ring fingers were severed at the second joint.",0
"An employee was removing the blades from a forklift. They fell off, causing an amputation to the employee's right index finger.",0
"An employee was cleaning a kitchen area when a knife fell. The employee attempted to catch the knife, which amputated the employee's left ring fingertip.",0
An employee's foot became caught on the lip of a trailer and he broke his right leg.,1
"A warehouse employee was stepping onto a walking rider forklift truck. The forklift struck the employee on the left ankle, causing a laceration and fracture of the ankle.",1
"An employee was deboning breast meat. The knife fell. As the employee retrieved it, it stabbed him in the pelvic region. He was hospitalized.",1
"When an employee went to ignite a cutting torch, he heard a quick popping sound within the torch, which resulted in a burst of the oxygen line approximately 6 inches from the fitting. The employee suffered burns to the lower abdominal/naval area.",1
"An employee was cutting a piece of plywood with a power saw. The saw kicked back and lacerated his right leg above the knee, causing an 8-inch-long and 3-inch-deep cut.",1
An employee was using a de-spooler machine to un-spool wire. The employee's left thumb was smashed between two rollers in the machine.,1
"An employee was attempting to break a concrete privacy fence panel with a sledgehammer when he swung back and hit himself on the right cheek with the sledgehammer, suffering a facial contusion.",1
"An employee was blowing debris off a roof with a backpack leaf blower when the employee fell off the roof to the ground, sustaining fractures to the hips and arm.",1
"An employee was attempting to clean the drain underneath a garbage disposal. The employee had treated the drain with bleach earlier in the shift to eliminate smells and kill fruit flies. When the smell persisted, the employee attempted to treat the drain with a different chemical. This caused a chemical reaction that produced gas. The employee became ill and dizzy, requiring hospitalization for inhalation/exposure to chlorine gas.",1
An employee was using a portable step ladder to access/egress from a roof when the employee missed a step and fell approximately 10 feet to a lower level. The employee suffered fractures to the left fibula and tibia.,1
"An employee fell off a dump truck to the floor, breaking his ankle.",1
"An employee was standing next to a trailer when a 50-foot pipe weighing approximately 1,850 lbs. rolled off the trailer and struck the employee. The employee suffered a compound fracture to the femur and multiple broken bones in the lower leg, later resulting in an amputation of the leg above the knee. The employee also suffered broken ribs and a shoulder injury.",1
"An employee was walking down a hallway. The employee slipped on the recently mopped floor and fell backwards, striking the back of his head. He lost consciousness, suffering a concussion and bleeding from his brain.",1
An employee was cleaning a kettle when the employee slipped and fell under the kettle. The employee was hospitalized with broken bones in the right leg.,1
"An employee was being trained on how to operate a motorcycle through an obstacle course. The employee fell off the motorcycle when it came to a stop, fracturing the right tibia.",1
"An employee fell in between a truck trailer and a loading dock while unloading the truck trailer, suffering a fractured pelvis, bruised right thigh, and two broken teeth. The employee was hospitalized.",1
An employee was hospitalized after performing physical exercises.,1
An employee was repairing a wire inside a machine that sweeps logs onto a conveyor belt when the machine struck the employee. The employee suffered a broken right shoulder and was hospitalized.,1
An employee was stepping over a string line when he tripped and fell to the ground. He fractured his hip and was hospitalized.,1
"While unloading a truck, an employee sustained a heart attack.",1
An employee was troubleshooting a ground fault on a pump when a transformer exploded. The employee sustained burns.,1
"An employee was conducting a security patrol of an area where buses and trailers park when the employee was struck by a vehicle, suffering blunt force trauma.",1
"A line cook had poured boiling sauce into a blender. When the blender was turned on, its lid came off and the sauce splashed on the cook's face, neck, and shoulder, causing second-degree burns to the face and neck.",1
"An employee helped install a new blade on the bun slicer section of a production line. Upon restarting the production line, a bun was misaligned and the employee attempted to straighten it. The slicer blade contacted the employee's right hand, resulting in amputation of the index finger and lacerations to the other fingers.",0
"An employee was retrieving pouches of cereal for a conveyor belt. Her right thumb was caught between the belt's moving parts, causing a partial amputation.",0
"An employee was walking in a parking garage when he tripped over a structure expansion joint and fell to the ground, injuring his right femur bone.",1
"An employee was accessing a work area from elevated heights (tank) to survey for radiation when the employee slipped and fell 10 feet onto a catwalk beam, suffering fractured vertebrae.",1
A deli slicer cut the tip of an employee's ring finger as he was cleaning it. The fingertip was removed.,0
"An employee was standing at a table folding clothes on the sales floor when she tripped and fell to the floor, injuring her hip.",1
"An employee was picking parts for an order when he fell about 8 feet off the end of a mezzanine onto an empty wooden pallet on the floor below. He was hospitalized for a severe concussion, a fractured rib and multiple lacerations.",1
"An employee fell while walking down a three-step stairway, suffering a broken right ankle and a laceration on the right arm. The employee was hospitalized, undergoing surgery.",1
"An employee was using a prybar to unjam a pallet that was stuck on a conveyor when the wood in the pallet gave way and caused the employee to lose his balance and fall backwards. He rolled his left ankle and broke it, requiring hospitalization.",1
An employee was hospitalized with a neck fracture after falling through shelving in a garden center.,1
"An employee was removing bolts from an actuator when the actuator fell and struck the employee's right wrist, breaking it.",1
"An employee fell to the floor while turning. The right side of her head and her knee hit the floor. She was hospitalized, suffering brain bleeding and swelling.",1
"An employee was on an ATV, rinsing sand off an adjacent truck using a hose. He fell 3 feet to the floor below, suffering a dislocated right knee.",1
An employee approached a suspected shoplifter in the parking lot to verbally deter him and was punched and kicked in the body by the shoplifter.,1
An employee was walking in the yard when he tripped over a piece of wood and injured his back.,1
An employee's fingers were smashed in a door. The employee suffered a degloving of the tip of the middle finger at the nail and the removal of the ring fingertip above the nail.,0
"An employee was entering the front of the facility when she slipped and fell, striking the linoleum floor. She injured her knee, requiring hospitalization and surgery.",1
"An employee was replacing seal rings on a valve strainer. After isolating the valve and bleeding off steam, the employee was removing a plate holding the seal ring when water released within the strainer and valve. The water contacted hot metal, which caused it to steam. The steam contacted and burned the employee's stomach and upper legs.",1
"Two forklifts collided in a warehouse. The head and shoulder of one of the drivers struck the floor, and the driver was hospitalized.",1
"An employee was setting up a line for 14-inch PVC pipe production. As the PVC pipe came out of the extruder, it started to sag. The employee lifted the pipe with the left hand to align it and was controlling the remote with the right hand. When the tank came in, the employee's left thumb was caught between the alignment pin and the tank, resulting in a thumb tip amputation between the nail and first knuckle.",0
An employee was working from an A-frame ladder while looking for a steam valve when the employee fell to the floor. The employee was hospitalized with broken ribs.,1
"An employee was loading sanitation debris into a sanitation truck when the truck backed up and ran over the employee's foot, breaking it. He was hospitalized.",1
An employee was cutting a small piece of wood on a miter saw when the blade partially amputated his right index fingertip.,1
"On October 7, 2019, around 1:30 p.m., an employee was nailing a bridging on a truss from a manlift at approximately 12 feet from the ground. The truss slipped and struck the manlift, causing him to fall to the concrete floor. He was hospitalized with a dislocated hip and a facial contusion.",1
An employee was cutting cardboard with a table saw. The saw cut his left index finger.,1
"On October 7, 2019, a security guard was punched in the face and knocked down by a hospital patient. The guard suffered a laceration to the lip and left elbow, as well as abrasions.",1
A rebar cage  broke free from its rigging while suspended from a crane. The rebar cage fell to the ground and then onto a nearby employee. The employee was hospitalized and required surgery for bone fractures in the neck and left foot.,1
"At about 2:30 p.m. on October 7, 2019, an employee was trying to retrieve a crushed cup from a rotary filler. The machine automatically cycled, and the employee's right middle finger was caught in the head heater area, causing an amputation between the first and second joints. The heater head was unguarded at the time of the incident.",0
"A pallet fell from a picker lift, striking an employee in the leg. The employee suffered a broken kneecap.",1
An employee was pulling weeds from a potted plant when a snake bit her on the hand. The employee was hospitalized because of the venomous bite.,1
"An employee was unhooking a 24-inch, 7-foot sewer pipe inside a trench. The pipe struck the employee, breaking four ribs and collapsing a lung.",1
"An employee was feeding mule tape through a 1 1/2-inch conduit using a power blower. The tape got stuck at about 20-25 feet. As the employee tried to dislodge the line dart, the pressure hose was separated or removed and the dart was pushed back due to the backpressure built up in the line. The dart impaled the employee in the right chest area, causing a severe puncture injury with partial lung collapse.",1
"On 10/07/2019, at approximately 17:45, an employee was filling a propane tank inside a scrubber when a static ignition source was created and ignited the propane vapors in the area, causing a flash fire. The employee received burns to the left arm and both legs, requiring hospitalization.",1
"An employee was securing vehicles on a car hauler trailer when the employee fell to the concrete ground, suffering a fractured right ankle and left knee.",1
"An employee was taking a coolant sample from a CNC milling machine. The employee's finger contacted spinning machinery and was lacerated, requiring surgery.",1
"An employee was cutting a catalytic converter with alligator shears. While the employee was trying to prevent the converter from falling, the clamp actuated. The employee's right index finger was crushed between the converter and the clamp and amputated at the first digit.",1
"An employee was conducting work under a machine when his right middle finger above the first knuckle was struck by a moving chain under the machine, resulting in an amputation.",1
An employee was helping to operate a hoist used to raise stone to an elevated work area.  The employee grabbed the cable on the hoist to help guide a lift when his finger went into the pulley.  The employee sustained an injury to his left pinky finger that required an amputation at the first joint below the nail.,1
"Three employees were installing a cage back into the crusher. They were transporting the cage back to the crusher utilizing a trolley system with three-ton chain falls attached to the trolley. The cage, that weighed 8000 lbs., tilted catching the injured employee's left hand between the chain and the striker plates resulting in amputation of the middle finger just above the second knuckle. The index finger was crushed.",0
"An employee was on a scaffold, framing a roof. The employee fell 17 feet to the ground, suffering a back injury and a head contusion.",1
An employee climbed a ladder and got onto a form to nail a 2x4 beam when he lost his balance and fell 10 feet. He was hospitalized with a cervical fracture and fracture of the right distal femur.,1
"An employee was working near a router head when a piece of wood was vacuumed into the router head. As the employee was trying to remove the wood, the employee's hand was pulled into the bit. The employee suffered lacerations and a fracture to the left ring finger, along the top.",1
"On October 7, 2019, an employee was emptying trash out of a rolling dumpster on the loading dock when he tripped over a pallet and fractured his right hip, requiring hospitalization.",1
An employee was exiting an shuttle in front of the hospital when the employee fell down three steps leading out of the shuttle into the parking lot. The employee suffered bleeding in the hip area.,1
"An employee was installing shingles and fell from a roof to the ground, suffering fractures.",1
An employee fell off a roof about 16 feet in the air. The employee was hospitalized.,1
An employee was climbing down the back of his truck when the employee slipped on the wet tailgate and fell. The employee struck the tailgate and suffered a pelvic injury.,1
"An employee was moving a pipe stand when the stand's leg folded and his right index finger was caught in the shear point, resulting in an amputation to the first digit of his right index finger.",0
"An employee was inserting a rug into a roller shaft opening when the machine started and pulled her left hand into the roller shaft opening, resulting in amputation of the left ring finger.",0
"An employee was inspecting bad cable at a take-up reel. The employee's left hand was caught between the cable and the reel, causing the amputation of the tip of the little finger.",0
"An employee was standing near his tractor and waiting for a service truck. When the service truck arrived, the driver's foot slipped off the brake. The employee was then pinned and crushed between his tractor and the service truck. He was hospitalized for excessive blood loss in a lower extremity and his right leg had to be amputated above the knee.",1
"An employee was on a truck, using a bar to move a pallet jammed against another. The pallet broke and the employee fell off the back of the truck to the ground 39 inches below.",1
An employee tripped and fell to the ground as she was walking to her office. She was hospitalized for a broken left foot and fractured left wrist.,1
"An employee leaned over to select a case from a slot and hit his head on the rack, suffering a head injury.",1
An employee was installing ceiling lights from an 8-foot A-frame step ladder. The employee fell off the ladder and suffered a head injury.,1
"An employee fell while walking on a sidewalk. The employee's right shoulder hit a welding machine, causing a fracture to the right upper arm.",1
An employee fell about 18 feet to the ground while exiting an aerial lift onto a roof. He suffered fractures.,1
An employee fell from a powered industrial truck to the floor after colliding with a stack of material. The employee suffered a back injury and broken hip.,1
"The injured employee was operating an electric pallet jack to shuttle empty totes and was driving around a pallet of freight. At the same time, a forklift operator was driving around the pallet of freight while carrying an empty pallet. The empty pallet contacted the injured employee’s lower leg area, causing the employee to be thrown from the pallet jack and strike their head on the floor. The injured employee broke a leg.",1
"An employee was disassembling a scaffold. When the employee moved his side of the staging, the load became heavy and he fell backwards onto a railroad track. He suffered a broken rib.",1
"After cleaning and sanitizing a table, an employee was pushing a chair back under the table when his foot became caught under the chair, causing him to fall forward onto the back of the chair. He suffered fractured ribs.",1
"An employee was stowing away the catwalk on a pavement marking vehicle when his left ring finger was caught in the catwalk, resulting in a fingertip amputation.",0
"An employee was performing maintenance on an automatic stacker with two co-workers. He was under the stacker when it suddenly dropped from an undetermined height and caught his shoulder and knee, crushing them and causing compound fractures.",1
"A temporary employee went to disengage the drum for the woodchipper. When he stepped up to activate the lever, a piece of wood hit his hard hat. He fell to the ground, hitting his face. He was hospitalized with bleeding on the brain and had surgery.",1
An employee was making a truck delivery. A second truck rolled and pinned the employee between the two trucks. The employee suffered chest trauma.,1
"An employee was coming down from an A-frame platform ladder when he inadvertently missed a step, causing him to fall approximately 7 feet. He hit the ground and broke his right shoulder, requiring surgery.",1
An employee fell while descending a step ladder and landed on a metal floor cart. He was hospitalized with four broken ribs and a punctured lung.,1
"After delivering mail to a residential house, an employee was walking down from the wooden steps when she fell to the ground, resulting in a fractured right ankle.",1
An employee was cleaning up the job site with his co-workers towards the end of the day when he passed out. He was hospitalized for dehydration and heat stress.,1
"On October 8, 2019, an employee slipped and fell in an MRI reception area, breaking her hip.",1
An employee was fixing a toaster and may have received an electric shock.,1
An employee was driving a utility vehicle around a building pad that was under construction. The vehicle tipped over while going up a slope and the employee sustained a broken left ankle. He was hospitalized.,1
"An employee was gauging a tank at an established well site. He lost consciousness and was found on top of the tank, with his head down in the manhole and with rib injuries. He was hospitalized.",1
"A technician was removing a discharge valve from a cylinder at a machine shop. The valve and chair came out, causing the discharge valve to drop slightly. His left middle finger was pinched in the opening and the fingertip was severely damaged. The fingertip was amputated.",0
An employee was using a grinder when the wheel shattered and struck the employee's face. The employee was hospitalized.,1
"An employee was struck by a vehicle being moved by another employee, suffering injuries to the chest/ribs, back, and head.",1
"An employee was installing a floodlight from a ladder. The ladder's feet slipped out and the employee fell, suffering broken ribs.",1
"An employee was splashed/sprayed by hot water while removing a clamp to a hot water pipe on a press, causing second degree burns to the back and neck.",1
"An employee was using a T-handled tool to attempt to pull a food-filled drain basket out of the floor. She fell to her left side, landing in the hot water that was flooding the floor. She was burned on the left side, back, and forearm, and was hospitalized.",1
An employee fell while getting on a bus and broke her ankle.,1
"An employee was rigging a load of rebar for a lift via a tower crane. The load lifted and swung out, carrying the employee with it. The employee fell after being raised about 20 feet, suffering fractures.",1
"An employee was exiting a dining area and crossing through a doorway toward the outside. She tripped on a doormat and fell forward to the concrete floor outside the dining room, suffering a broken left lower leg.",1
"An employee was taking concrete out from a cast mold when his middle finger became caught while trying to keep the ""key-way"" open, resulting in a left middle fingertip amputation.",1
"An employee was cutting meat on a process floor. His knife struck him in the chest above his mesh apron, causing a laceration.",1
"An employee was preparing a flat roof to be silver-coated. While removing excess water with a squeegee, the employee fell to the ground below and suffered a head laceration and a broken vertebra.",1
An employee was cleaning the top of a vessel with a water hose. The employee lost consciousness.,1
"An employee was unloading plant material from a tractor trailer. The employee was using a plant hook to grab the plastic container and pull the container to the rear of the trailer. As he neared the back of the trailer, the container broke and the associate fell from the trailer, suffering a broken femur.",1
"On October 8, 2019, at approximately 9:54 a.m., an employee was removing a broken section of concrete sidewalk from around a wrought iron fence.  As the employee manually lifted and moved a section of concrete away from the fence, the employee was struck in the face by the bucket of an excavator. The employee's head was temporally pinned between the bucket of the excavator and the fence. The employee was hospitalized for treatment of a broken arm, broken jaw, separation of the right ear, and injuries to the head and neck.",1
"An employee was tapping out a hole at the back of a boat being built, using an angle drill, a socket, and a tap. The employee's gloved left hand was pulled into the rotating tap, resulting in the partial amputation of the thumb.",0
"On October 8, 2019, an employee was using a radial arm drill press to balance a propeller when the drill press amputated the employee's left thumb at the first knuckle.",0
"An employee was on a ladder changing a ballast in a light fixture when he was shocked and fell from the ladder, hitting his head on the concrete ground and losing consciousness.",1
 An employee experienced a fingertip amputation while operating a compactor.,0
"An employee was operating a meat slicer when the employee's right middle finger contacted the blade, resulting in a fingertip amputation.",0
"An employee was running a pallet-nailing machine. One of the hydraulic nailers in the machine jammed; as he was trying to clear the jam, another nailer descended and amputated his left little finger.",0
An employee was clearing a jam when the machine cycled and amputated two fingers in the point of operation.,0
"An employee was accessing a lower staircase from a catwalk. The employee fell to a lower level, suffering a broken back.",1
"An employee was lowering a dump truck's tailgate when his left hand was caught between the tailgate and safety chain, resulting in an amputation to the ring finger.",0
"An employee was using a drum lift to pour acrylic acid. The drum slipped and splashed acid on the right side of the employee's body. The employee suffered chemical burns to the right arm, leg, neck, chest, and face.",1
"An employee lost his balance while stepping off a wooden box, landing on and fracturing his heels.",1
An employee was operating a can filler/seamer machine when the machine became jammed. The employee was attempting to remove the jam when the machine amputated the employee's left index finger.,0
"An employee was stocking in a stockroom. The employee tripped over a hand truck and fell to the floor, suffering a broken hip.",1
"An employee reached into the bench area of a draw bench to retrieve a piece of wood for cribbing for steel bundles. The operator of the draw bench dropped a steel bar which fell onto the employee's right hand, causing dislocated finger bones (requiring resetting), cuts (requiring stitches), and bruises.",1
"On October 9, 2019, an employee was riding a ride-on spreader to treat a turf area with herbicide when the employee went over a hole that caused him to be jolted and land on his ankle. He suffered a dislocated and fractured ankle.",1
"An employee was grinding a piece of copper on a disc sander when his glove was caught between the sander belt, pulling his right thumb into the sander operation area and resulting in the amputation of his right thumb tip. He was hospitalized.",1
"An employee was watching a rotary screen while washing down the floor and equipment. In the area was a chemical dosing pump that delivers peroxide to a mixing system to clean and sanitize carcasses. The suction side of this pump has a chemical O-ring that compresses the suction hose feeding the chemical into the pump. The O-ring was compromised, allowing chemical to drip out of the hose and onto the floor. The employee breathed in the chemical vapors, exposing his respiratory system to them.",1
"On October 9, 2019, an employee was walking up an incline to enter the main building and tripped on either the mat covering the incline or the incline itself. The employee fell backwards and struck the back of his head on the ground, suffering a head injury and bleeding out of an ear.",1
"An employee was conducting grinding operations on a flange weighing 265 pounds. The flange was supported by two metal saw horses. After the employee finished grinding on the top side of the flange, the flange had to be flipped over to grind the bottom side. A crane was used to lift and flip the flange. As the flange was being flipped over, it started to fall off one of the saw horses. The employee attempted to grab the flange. The employee's middle finger on his left hand was caught in between the flange and the saw horse. The employee was hospitalized  for a compound fracture of the left middle finger that required surgery.",1
"An employee was installing tape on top of an aircraft engine when he fell about 13 feet to the ground, suffering fractures.",1
"An employee was reaching into a wooden crate to retrieve some parts. A wasp stung him, and the sting site became red and painful. The next morning, his hand was swollen and difficult to move. He was hospitalized.",1
"An employee was entering a trench when the employee was trapped by falling dirt, suffering crushing injuries that required hospitalization.",1
"Three employees were moving an upright piano into a residence using moving straps. A piano leg landed on the right foot of one of the employees, breaking it. She was hospitalized.",1
"An employee was cleaning dough from a straightening-out device in a bakery. Her right arm was pulled into the rollers, causing a fractured arm, a laceration to the hand, and ligament and tendon injuries to the hand.",1
An employee's right thumb was caught in a belt plate on a conveyor belt. The thumb was amputated.,1
An employee was washing down a press with a high-pressure water machine when he dropped the wand and high-pressure water injected into his left arm just above the elbow. He was hospitalized.,1
"An employee was trying to unstick a conveyor belt. He gripped the conveyor belt with his right hand and pulled on it to get it to move again. His right thumb was still underneath the belt as it began to move. The moving belt pulled the skin off his thumb to the bone, causing a partial right thumb amputation.",0
An employee was putting on a work boot when a fiberglass splinter punctured the bottom of the employee's left foot. The employee was hospitalized for an infection.,1
"An employee was setting up a large press machine when a nearby forklift lifted the press. The press fell into a tub and then rolled onto the employee, who suffered a laceration/fracture of the right arm and a laceration of the left leg.",1
"An employee was putting his tools in a container when a spray paint can rapidly decompressed and bounced off a wall, hitting him in the face. He suffered a laceration and fracture to the nose.",1
"An employee operating a tiara machine began to jog (actuate) the machine. The foil band did not feed through the cutter into the mandrel. The employee was attempting to straighten the band when the employee's right third finger was caught by the cutter, resulting in a fracture and laceration to the fingertip. The employee was hospitalized.",1
A truck driver arrived at work before the start of his shift at 7:00 AM. He was bitten on the right thumb by a venomous snake and was hospitalized.,1
"An employee was operating a tugger, proceeding down a travel lane in front of a receiving dock. He passed a forklift, which struck the tugger in the rear. He fell out of the tugger to the concrete floor, suffering a lower back injury.",1
"On October 9, 2019, an employee heard a ""pop"" in his back while he was lifting a heavy bag of concrete. He was hospitalized for a pinched nerve/pulled muscle.",1
"An employee was cleaning a floor with water from a hose. He became tangled in the hose and fell, breaking a rib.",1
"An employee was carrying a ballistic pad and walking by her sewing machine when she slipped and fell on a piece of fabric that was on the floor. She impacted the concrete floor, fracturing her left arm.",1
"An employee was checking the belt on a conveyor. The machine cut on and pulled the employee's right hand into the pulley. The tip of the index finger, knuckle of the middle finger, and tip of the ring finger were amputated.",0
An employee suffered an amputation of the left ring fingertip.,0
"An employee was cutting a concrete header using a handheld concrete saw with a 14-inch blade. The saw blade hit the rebar, kicked back, and cut the employee under the left arm.",1
"While performing part inspection and packaging, an employee noticed a sprue was lodged in a stripping fixture. He climbed a step stool and was trying to dislodge the sprue when a robot approached and struck his right forearm and hand as it came down. As it continued to cycle, it tore the skin and removed flesh in a downward and upward motion.",1
"An employee was using a jack knife to cut a zip tie that was keeping two items of luggage together. As he was cutting the zip tie with his right hand, his hand moved towards the left hand, cutting his left wrist to the vein.",1
An employee was cleaning a meat processing machine. The employee's left hand was caught on a moving plunger and the ring fingertip was amputated.,0
"An employee was removing a ""Christmas tree"" fitting from a pressurized wax tank. The pressure in the wax tank caused the wax to burst from the fitting and onto the employee. The employee was hospitalized for burns to the body.",1
"On October 9, 2019, an employee was crossing the street in a crosswalk. A motor vehicle struck the employee, causing a broken wrist, shoulder, hip, and sacrum. The employee was hospitalized.",1
An employee was cutting meat with a knife when the blade sliced and amputated her right little fingertip.,0
"An employee fell while walking down a wet walkway ramp, hitting the ground and breaking her ankle.",1
"Employees were dumping powder from a super sack into a tank on a tanker trailer when a spark occurred, causing an explosion. One employee suffered burns to the face and eyes. A second employee suffered burns to the arms and face.",1
"An employee was assembling an amusement ride while standing on the deck. He stepped off the deck just as he was walking off a curb and fell approximately 5 to 6 feet to the ground, suffering a concussion and left forearm fracture.",1
"A temporary employee was moving a pallet containing four steel molds using a sit-down forklift. When the employee lifted the forks on the forklift, the pallet broke apart causing two molds to fall on the floor. The employee retrieved a new pallet to replace the broken pallet. He then attempted to pull and slide over one of the remaining molds on the broken pallet onto the new pallet, which he had placed alongside the forks. The steel mold was approximately 500 lbs., and when he slid it to the pallet edge, the pallet once again broke apart. This caused the mold to come crashing down onto the employee's left hand, resulting in a left middle fingertip amputation.",0
"An employee was hydroblasting when the sprinkler head malfunctioned. Water shot out of the hose at 18,000 psi, blowing off a piece of pipe and tubing. The piece impaled an employee's left leg, breaking the tibia.",1
"An employee was helping a contractor close a tarp atop a trailer. The tarp was pulled and the employee fell 8 feet to the ground, suffering a broken left elbow, a broken left wrist, and a head injury. The employee was hospitalized.",1
"An employee was installing crown molding with a nail gun. One of the nails bounced back and pierced his right eyebrow, going all the way in.",1
"An employee was removing bolts from a flanged cooling water pipe connection. When the last bolt was removed, a surge of blast furnace gas came out of the pipe, exposing the employee to carbon monoxide.",1
"An employee was part of a team that was rebuilding a cement hopper used to bag cement. While being lifted, the metal hopper twisted and struck the employee in the head. The employee was hospitalized with a head injury.",1
"An employee was exiting a vehicle on a mail route when the employee slipped and fell to the ground, fracturing the right leg. The employee was hospitalized.",1
"An employee was removing the housing from a drill rod and putting on the reamer. A pipe wrench slipped off of the pipe and spun around, striking and breaking the employee's left leg.",1
"An employee pushed a button on the milling machine when the track came around and ran over his foot, breaking it.",1
"An employee was installing a horizontal rack beam from a scissor lift. When he moved the scissor lift, he was pinned against the rail of the lift and the rack beam. He then fell from the lift. He suffered fractured vertebrae and a severed lymph node system.",1
"An employee was hoisting a propane tank when the chain rigging caught the employee's hand, resulting in an index finger amputation.",0
"A sawblade came off a concrete saw and struck an employee who was working nearby, breaking and lacerating the employee's leg.",1
An employee suffered fractured ribs and a punctured lung after he slipped and fell off of a bucket truck.,1
"An employee was moving pieces of steel when a piece shifted and smashed the employee's left index finger, causing a partial amputation and bone damage.",1
"An employee was loading chicken feathers into a bin. Rendering fluid splashed on him, causing third-degree burns over 40 percent of his body.",1
An employee was lifting a dolly to place on the pintle hook of a trailer. The employee's left hand got caught between the dolly and the trailer. The hand was broken.,1
"While adjusting a guard, an employee came into contact with an exit chain drive. He suffered a partial amputation to the tip of his left middle finger.",0
An employee was changing out a bucket on a bucket loader. The loader was actuated and the employee's left hand was smashed. The employee underwent surgery to amputate fingers.,0
"On October 11, 2019, a door closed on an employee's left hand, injuring the middle finger. The employee was hospitalized and the fingertip was later medically amputated.",1
"An employee was pushing cattle through a gate. The wind was moving the gate, and the employee's left thumb was caught between the gate and the fence. The employee suffered an amputation to the thumb.",1
"An employee was helping to unload near-empty wire-duct spools (2 feet tall, 200-300 pounds) off a trailer bed that was about 2 feet off the ground. The last spool rolled over from the trailer and one side fell on the employee, who suffered a fractured vertebra and was hospitalized.",1
An employee fell from a ladder while reattaching electrical service to a house. The employee landed on the ground and suffered a broken wrist and a back injury.,1
"An employee was trying to realign a tray when he fell, landing on his back on the concrete floor.",1
"An employee was returning a truck unloading platform's transition plates to their resting position. The plates struck his right thumb, causing a fracture and an avulsion of the nailbed.",1
"An employee was framing a wall for a new construction. The employee fell backward against a guardrail, which broke; the employee then fell from the second floor to the ground, suffering a concussion and broken ribs.",1
"A forklift operator was moving kegs. The top keg on the forks tipped and fell back toward the operator. The keg crushed the operator's right hand against the top of the rollover protection system, causing fractures to multiple fingers.",1
"Two employees were opening a sliding gate. One employee's right-hand fingers got caught in the gate roller guide, causing severe fractures to the ring and little fingers.",1
"An employee was cutting pants at a cutting table. The textile cutting machine's blade lacerated her left middle finger, causing a partial amputation.",0
"An employee was walking down stairs. His foot slipped on a step, causing his right leg to strike the edge of the lower step. The leg was broken.",1
"An employee was lifting a piece of wood when a forklift contacted the wood, causing the wood to come down on his right index finger, resulting in an amputation to his fingertip.",1
"An employee was using a press laundry washing machine. The press came down on the employee's hand, amputating at least one finger.",0
"An employee was working at a gate. As she opened the door for an inbound truck, she fell to the floor and broke her hip.",1
"A driver slipped and fell while exiting the cab of his truck. He landed on his right side and suffered fractures to the right elbow, wrist, and knee.",1
"An employee was driving a lift truck to pick up and empty a trash dumpster when a pallet fell off the dumpster and struck the employee, crushing the right index finger and resulting in a partial surgical amputation.",1
"An employee was hooking up two sets of trailers when he slipped on the ground and lost his footing. His hand was pinched in between the dolly and the trailer, resulting in a laceration to the left thumb that required hospitalization.",1
An employee was setting up an in-line machine. The employee noticed a wrinkle in the material inside the machine and was about to clean it when his hand was drawn into the roller. His ring fingertip was amputated and his little finger was broken.,0
"Employees were preparing to move a precast wall with a forklift. The wall fell on an employee's leg, crushing it.",1
An employee was oiling the chain on a running small stacker machine. He had a rag in his right hand and an oil can in his left hand when the rag was caught in the chain and sprocket. His right middle fingertip was then amputated by the chain.,0
An employee's right index fingertip was amputated by a chain and sprocket.,0
"An employee was climbing a tree. At 15 feet up, he fell from the tree to the ground, breaking the sacrum bone near his tailbone.",1
"While working in a steam vault, an employee suffered second-degree burns from a release of steam.",1
"An employee was driving a tow motor down an aisle. Her tow motor crashed into another one, which was stopped at an intersection, and her left leg was crushed between the two tow motors. Her lower leg was injured and she was hospitalized.",1
"A driver was stepping out of the truck he had just parked. He fell and hit his head on the ground. He was hospitalized, undergoing surgery for brain bleeding.",1
An employee's hand was caught between the rollers and a metal beam on a saw production line. The employee's left index fingertip was amputated.,1
An employee was rebuilding a chopper assembly for a packaging machine in the maintenance shop. He was hooking up compressed air to test the unit while his left hand was resting against the chopper blade when the blade cut off the fingerprint pad on his left finger.,0
"An employee was picking parts from a rack. A forklift on the other side of the rack was taking a pallet down from the top of the rack. It pushed a container off the top rack that fell on the employee, who suffered head and neck injuries. The employee was hospitalized.",1
"At about 11:05 p.m. on October 10, 2019, an employee was cutting vinyl window parts using a pneumatic saw. The saw caused a partial amputation of the employee's left ring and middle fingers and a laceration to the tip of the left index finger.",0
An employee was clearing out concrete from the inside of a 5-inch pipeline. A metal object that was being used to remove the concrete lacerated the employee's cheek.,1
"An employee was fitting insulation into a hole and fell through a roof opening, landing on the floor 17.5 feet below. The employee suffered blunt trauma injuries.",1
"An employee was using a wire-end brush attachment in a pneumatic die grinder to clean debris out of a casting mold. The employee stepped down from a 6-inch raised platform, then felt severe pain in his left knee as soon as it was bearing weight. A 1-inch-long, 0.0104-inch-thick steel wire from the brush had penetrated the knee. The employee was hospitalized.",1
"An employee was rolling angles along non-mechanical conveyor rollers to bring material closer to a cutting saw. The employee's left little finger was crushed between a roller and the material, resulting in a partial amputation of the fingertip.",1
"On October 11, 2019, an employee was bitten by a dog while providing home healthcare services at a patient's home. The employee was hospitalized.",1
"An employee started a troweling machine while it was hanging in mid air. The troweling machine's pan came off and struck the employee's leg, breaking it.",1
An employee's finger was pinched in a closet door. The tip was amputated.,0
"An employee was bringing dogs inside when a dog  got loose and bit another dog's nose. As she attempted to pull the dog off the other dog, he bit her. She sustained three puncture wounds to her left arm/wrist and an amputated right pinky fingertip.",0
An employee was operating a press brake when his right hand was caught between a metal fixture (the product) and the brake press. The hand was broken and lacerated.,1
"A belt fell off a pulley. As an employee moved to reconnect the pulley, another pulley caught his glove and right ring finger, amputating the tip.",0
An employee tripped on a pallet while pulling a mattress. The employee suffered a broken arm and was hospitalized.,1
"An employee's right thumb came in contact with an electric slicer while slicing ham, causing the amputation of the thumb nail and thumb tip.",1
"On October 11, 2019, an employee was unloading metal ductwork from a box truck. A large sheet metal duct fell and trapped the employee's wrist between its sharp edge and the edge of the truck floor. The employee suffered a lacerated wrist and cut tendons.",1
An employee was cleaning vents from a scissor lift. The employee fell through an opening to the ground about 8 feet below. The employee suffered a head injury causing brain bleeding and was hospitalized.,1
An employee was guiding a crane during a container lift. The employee's hand was crushed between containers.,1
"On October 11, 2019, at approximately 9:00 a.m., an employee was installing an egg belt conveyor system at an animal confinement building. A temporary cable and pulley system was being used as part of the installation process to transport materials. The cable became dislodged and the employee's left index and middle fingers were caught by the cable and pulled into a pulley. The employee's left index finger was amputated at the middle knuckle, and the left middle finger was fractured.",0
An employee was bitten by a copperhead snake at a garden center. He was hospitalized.,1
An employee was checking a leak in equipment when an auger blade caught his middle finger under the equipment. The fingertip was amputated.,0
"An employee was walking over a transfer hose when he lost his balance and fell, breaking his left arm.",1
An employee suffered a headache after inhaling spilled nitroglycerin in a manufacturing area.,1
"The morning after a shift spent repeatedly bending and lifting up to 20 pounds, a temporary employee suffered pain in her lower back and legs and could not move properly. She was hospitalized.",1
"Two employees were moving a treadmill. One of them had a foot caught in a pallet; when they began a team lift of the treadmill, he fell over and broke his femur.",1
"An employee was operating a pallet jack. The jack ran over his left foot, crushing it.",1
"An employee was standing next to a crate of windshields that were packed vertically. The windshields fell forward and the crate broke. The falling materials struck the employee, causing multiple pelvic fractures on both sides, a tailbone fracture, bulging discs, and lacerations to the arm.",1
"An employee was working on the brakes of a baggage cart. The employee's left little finger was smashed between the side of the trailer and a tongue that locked the tires. The finger required surgery, having suffered minor damage to the bone.",1
An employee was clearing meat from a bone collector when a piston on the machine amputated his right index fingertip.,0
"An employee was helping another employee clear a jam from a bag machine. The bags dislodged, causing the employee's left little fingertip to strike a sharp plate. The plate amputated the fingertip.",1
"An employee was standing on a ladder to restock prizes. As the employee was coming down, the ladder came out from beneath him, and he fell 4 feet to the floor. The employee hit his head on the floor or the bottom of a display shelf and then had a seizure.",1
"An employee was walking down a store aisle when her rubber-soled footwear became stuck on the floor and her shoe came off. She then tripped and fell, fracturing her pelvis and requiring hospitalization.",1
"A certified nursing assistant was leaving a patient room. She slipped on liquid in the hallway and fell to the floor, injuring a knee. She was hospitalized, undergoing surgery.",1
"An employee was operating an electrical gangway when the gangway hydraulics failed, causing the gangway and employee to fall 10 feet to the lower level. The employee contacted the gangway's metal frame. His knees were bruised and he lost consciousness.",1
An employee slipped while carrying a stick of galvanized pipe. He fell to the floor and suffered a left-arm muscle injury that required surgery.,1
"An employee was clearing a jam on a stem cartridge filling machine when his left index finger was caught between a pneumatic plunger and the frame of the machine, resulting in a fingertip amputation. The air source was not locked/tagged out at the time of the incident.",0
"An employee was walking across a floor that had just been mopped when he slipped and fell to the floor, fracturing his right hip and requiring hospitalization. ""Wet floor"" signs were posted at the time of the incident.",1
An employee was removing shavings from a magnetic drill. His hand was caught by the drill bit. His ring finger was surgically amputated.,0
"An employee was a spotter for a forklift operator. He was walking backwards when he stumbled and fell to the ground. The forklift driver stopped and the load (pit liner material roll) rolled off the forks, striking the employee and breaking his legs.",1
"An employee was moving a cappuccino machine from a cart to a pallet. The legs of the machine dropped through the top of the slats on the pallet, causing the employee's finger to be pinched between the body of the machine and the pallet. The employee's left ring fingertip was amputated.",0
An employee was bending lance pipes when he slipped and struck the edge of a pallet carrier. He suffered facial injuries.,1
"An employee was removing bolts from a steam line when an adjacent steam line burped, releasing steam that burned his lower rear section.",1
"An employee was climbing a ladder while doing maintenance work when he missed a rung and fell to the floor. The fall resulted in a broken wrist, requiring hospitalization.",1
"An employee was walking into a locker room when he slipped and fell onto the floor. He hit his head, right elbow, and right hip. He was hospitalized the next day, having broken the hip.",1
An employee's left arm was caught and broken between a roll-up spindle and plastic wrap.,1
"An employee was trying to get away from a wasp, stepped backwards off a curb, and fell on the concrete ground, fracturing his left hip. He was hospitalized.",1
An employee was assembling a crane. His finger was cut and bruised while he was aligning a pennant on a boom.,1
An employee was using a powered lathe to polish a steel shaft with an emery cloth when his hand was caught between the cloth and the shaft. He suffered fractures to three fingers and his wrist.,1
"An employee fell approximately 6 feet while attempting to hammer a pin in the swing away attachment on the boom of a crane. The boom was activated while the employee was inside the swing away attachment, causing the attachment to disengage from the boom and fall to the ground with the employee inside it. The employee suffered multiple back fractures and bruises.",1
"After installing rooftop HVAC systems, an employee started to descend the extension ladder from the roof when it retracted, causing the employee to fall approximately 25 feet to the ground. The employee suffered four cracked ribs, a fractured pelvis, and a fractured vertebra.",1
"While cleaning equipment prior to rig down, an employee was working with a rig contractor to rig down a centrifuge slide with a forklift. The employee was sitting on a beam under the centrifuge and behind the slide when the slide slipped off the forklift, swinging and pinning the employee against the beam of the centrifuge. He sustained a fractured tibia and fibula just below the left knee.",1
"An employee was crouching down while sand-blasting a void tank on a barge when abrasive material from blast nozzle struck his right calf, causing a skin abrasion.",1
An employee walking up a ramp fell over the rails and injured his back and ribs. He was hospitalized.,1
"An employee was setting floor joists when one of the joists became dislodged, fell, and struck a step ladder. The step ladder then struck the employee's right shoulder, requiring hospitalization.",1
An employee was bitten by a rattlesnake on the left index finger while engaged in search and tracking operations in the field. The employee was hospitalized.,1
"An employee stepped up on the rear tire of a pickup truck to access a toolbox in the truck bed. As he was getting down, he lost his balance and fell onto the ground, fracturing his left leg and ankle. He was hospitalized.",1
"An employee fell approximately 25 feet to the ground while descending an electrical tower, suffering broken bones and contusions.",1
"On October 14, 2019, an employee was placing a wire rope choker around a pedestal that was going to be moved by an all-terrain forklift when his hand was pinched between a piece of rigging (wire rope choker) and the load that was to be moved. He was hospitalized with fractures to three of his fingers and a laceration to the palm of his left hand.",1
An employee filling propane cylinders for forklifts was burned on the arms and back following a release of propane that ignited.,1
"An employee was moving a metal food cart so that she could wash the floor under it. A wheel came off the cart, causing her to fall. The cart struck her left hand and broke her left middle finger. She was hospitalized, undergoing surgery.",1
"While working in a oil mill, an employee stepped on a screw conveyor belt cover. The cover shifted, causing the employee to fall into the conveyor belt and resulting in a left ankle amputation.",1
"An employee driving a lift truck hit a barrier and was ejected from the lift truck, suffering a broken left leg.",1
An employee was operating a powered industrial vehicle to transport wheeled material baskets when the transported baskets struck a stationary basket. The struck basket fell and was going to hit a computer station. The employee left the vehicle and was struck while attempting to prevent the basket from striking the computer station. The employee suffered a right knee laceration.,1
"An employee was setting up his work area. While he was lifting his saw, he pulled a muscle in his lower body, requiring hospitalization.",1
"An employee was clearing clogged material on an auger when his finger was caught between the auger and the auger housing, resulting in a right index fingertip amputation.",0
An employee was repairing a potable water cabinet on a jet bridge from an A-frame ladder when the jet bridge moved and knocked the employee approximately 8 feet to the ground. The employee was hospitalized with a fractured left heel.,1
An employee was operating a golf cart while performing maintenance repairs when his foot slipped off the pedal and became caught on a parking lot barrier. He was hospitalized with an overextended foot.,1
An employee overextended and injured his back while reaching to tighten a bolt during a wheel alignment. He was hospitalized.,1
An employee was walking from her vehicle in the employee parking lot to the main building when she tripped on the seam of a cement slab and fell to the cement ground. She broke her hip and required hospitalization.,1
"An employee was showing another employee how to shut off a stud machine when the cable on the stud machine arced. The employee reacted by jumping out of the back of the trailer (height of approximately 4.5 feet). His foot became caught on the ladder, causing him to land awkwardly on his arms. He suffered a fractured radial head on his left arm, as well as a broken radial head and dislocated elbow in his right arm.",1
"An employee was pushing a drywall cart when a wheel broke off the cart and the drywall fell on the employee's leg, causing muscle damage and bruising.",1
An employee was operating a forklift in reverse and struck another employee that was walking in the area. The injured employee suffered a laceration and broken bone to the left foot.,1
"An employee was attempting to remove the drag link, also known as a steering arm, on a ready-mix concrete truck. He removed the front nut and was attempting to remove the rear nut but it would not come free. He then used a sledge hammer and struck the nut, which came off, causing the steering to swing and strike the employee on the left cheek and eye. The employee sustained a left orbital fracture, requiring hospitalization and surgery.",1
"On October 14, 2019, an employee was checking a machine's chain for bent pins when his right hand came in contact with the chain and sprocket. This resulted in the amputation of his right ring fingertip.",0
"A propane smoker exploded while an employee was trying to light it. The employee suffered injuries to the right forearm, right hand, and right side of the face. The employee was hospitalized.",1
"An employee was hospitalized after falling in a staircase, requiring surgery.",1
An employee was sitting in chair at a push position location. She got out of the chair and stumbled. She reached for something and her left pinky finger was amputated.,0
An employee was cutting something with a knife. The knife cut off the tip of his left middle finger.,0
"An employee was putting cardboard into a compactor. His right ankle got stuck and was then caught by the compactor, causing a double fracture above the ankle. He was hospitalized, requiring surgery.",1
"An employee was working on a customer's electric forklift, which had a dead battery. After power was connected to the battery, the forklift moved in reverse and crushed the employee's lower leg against another piece of machinery. The leg was broken.",1
An employee was operating a CNC router machine and was drilling holes into a metal part that was loaded into the router. The tool bit in the router machine broke and particles punctured his abdominal area. The particles entered his body and had to be removed surgically.,1
"An employee was placing recycled cardboard into a bailing conveyor machine while maintenance cleanup was being conducted nearby on an open floor panel of the machine. He fell through the open floor panel into the hole and struck the outer surfaces, sustaining bodily lacerations and contusions near his chest and back.",1
"On October 14, 2019, an employee was operating an upcut saw. As the employee was loading approximately two inch by three quarter inch wood material into the saw, the employee's left hand was clamped into the saw's point of operation. The saw blade cycled and amputated four fingers. The employee was hospitalized.",1
"An employee was on a walkie pallet jack, picking orders. The employee's pallet jack bumped into another one, stopped in front of him, and his little finger was crushed. The finger underwent an amputation.",0
"An employee was repairing the pour spout on a furnace. He had stepped over and was straddling the spout when his foot became caught on the edge of the furnace lid. He lost his balance and fell backwards into the furnace slag pit, suffering multiple fractures to his back and ribs. He was hospitalized.",1
"An employee was repairing a side shift cylinder on a forklift. The lever on the unit that actuates the side shift cylinder was then moved. The employee's hand slipped and fell inside of the cylinder hole, amputating the left index fingertip.",0
"While stepping down into a catch basin, an employee fell feet first into the bottom of the basin. The employee suffered injuries to both heels and was hospitalized.",1
An employee was standing on a loading dock when a stand-up forklift ran over the employee's toes causing lacerations. An antibiotic used to treat the employee caused a reaction and the employee was hospitalized.,1
"An employee was cleaning plastic film that had dripped from the hanger die of a bubble machine. The employee's left hand was caught between the machine's roller and nip roller, causing fractured fingers and a degloving injury to the ring and index fingers.",1
"An employee was on a 10-foot ladder hanging and removing signs from the front of a building. While coming down the ladder, he slipped and lost his footing, falling from about the halfway point on the ladder to the ground. He landed on his left back side, injuring his back, neck, left knee, and left elbow.",1
An employee's leg was crushed and broken when a semi-tractor trailer he was working on rolled over his leg.,1
"An employee was taking a lift truck outside to perform preventive maintenance on it. While he was moving the lift truck, he heard a squeaking noise coming from the engine compartment. He opened the bonnet/hood and was trying to figure out where the noise was actually coming from. The engine was running at the time. While he was trying to get a better look at the water pump area, his right index finger was caught between the fan belt and pulley, resulting in a finger amputation.",0
"On October 15, 2019, an employee was operating a portable circular saw when the saw blade amputated the employee's left thumb and left little finger.",1
"An employee was operating a crane in a pot room when a fire occurred. While exiting the crane, the employee suffered burns to the hands and face.",1
"An employee was on a pallet jack pulling an order. When the employee dismounted the pallet jack, it rolled over the back of the employee's left foot, causing a laceration to the left Achilles tendon.",1
An employee was operating a machine that load tiles into a box. The employee attempted to correct mis-loading of tiles into the box when their gloved index finger was caught in the pulleys that drive the roller and conveyor feeding tiles into the box resulting in amputation.,1
"An employee was bent down beside a pallet when a forklift backed into him, causing the amputation of his right leg below the knee.",1
An employee had two fingers amputated during installation of a soil/cave protection system.,1
"An employee was moving reels in a machine. The employee unloaded a full reel from the machine and was rotating an empty reel to be loaded.  The employee's left hand was caught between the full reel and the empty one, causing the amputation of the index, middle, and ring fingertips.",1
An employee was operating a winding machine when the employee's left arm was caught and fractured in the machine.,1
An employee was bending a part on a press brake. His left index finger was caught between the top of the part and the front of the upper die. The finger was partially amputated.,0
An employee installing drywall fell from the third step of a step ladder and broke his leg.,1
"An employee was driving a forklift into a trailer. While turning to avoid a pail, he struck a metal bar used to raise or lower the extendable, suffering a puncture wound to the left leg and a fractured lower leg bone.",1
"An employee was using a handheld circular saw to cut wooden planks when the saw blade came in contact with his lower leg area, causing a severe laceration to his right calf muscle that required hospitalization and surgery. He was installing a roof at a residential construction site at the time of the accident.",1
An employee was operating a lift gate control to lower a dock plate when the dock plate lacerated his left hand along the outer edge of his palm below the pinky.,1
"An employee was attempting to enter a tractor when a bolt on the first step broke off, causing the employee's leg to impact the ground and resulting in pain to his lower back.",1
"An employee went to remove an actuator from a valve. The actuator was still energized and sprung up, hitting the employee in the ribs. The employee was hospitalized with five broken ribs.",1
"An employee fell 8 feet from the platform of an order picker to the floor, suffering back injuries.",1
"A maintenance employee was setting the calibration on the metal detection section of the packing line, which was not running at the time. The employee's calibration card fell into the belting on the conveyor. The conveyor belt was lifted to retrieve the card. During this time, the belt was activated. The employee's hands were caught between the bottom of the conveyor belt and a conveyor roller. He sustained the amputation of the left middle fingertip and lacerations to fingers on his right hand.",0
"An employee was delivering mail when he began to experience nausea and heat cramps, requiring hospitalization.",1
"An employee was changing the sandpaper on a disk sander with a 3-inch putty knife. The sander kicked back, causing the putty knife to slip and amputate the employee's left index finger at the middle joint.",1
"A Kinder Morgan employee accessed the top of a truck during a loading operation. When he opened the dome lid, alkylate pressure released and propelled him onto the truck rack roof, then to the ground below. He suffered multiple fractures and a torn artery in the skull, requiring hospitalization.",1
"An employee was cleaning material from a screen located above a rotary valve when the employee's right index fingertip was caught in the rotary valve, resulting in a fingertip amputation.",1
"On October 15, 2019, a driver had finished servicing a school when he went to get a drink from the back of the refrigerated box truck. He climbed up the truck's door to reach for the drink when he slipped and fell about 4 feet to the ground. He suffered a fracture to the ball joint going into his hip socket and was hospitalized.",1
An employee was using a table saw to cut plywood for a crate. The saw blade amputated the tip of the employee's left thumb.,1
An employee was investigating a thermostat that was mounted about 10 feet above grade. She was using a step ladder to access the thermostat. She was standing approximately 4 to 5 feet up the ladder when it tipped over. The resulting injuries required hospitalization.,1
"An employee was operating a conveyor belt when his right arm was caught in between a roller and the conveyor belt, resulting in his right arm at the wrist and forearm being severely lacerated.",1
"An employee was erecting a barn when a wind gust hit the wall of the barn, causing it to become unstable and strike the employee. The employee suffered a broken back and broken ribs.",1
"An employee was testing the RPM of a chain drive on an airlock valve assembly when the employee's right middle fingertip was caught in the chain drive, resulting in a fingertip amputation to the middle of the fingernail.",0
"An employee became caught under a dolly while moving a trailer, suffering a broken hip and broken ribs.",1
"On October 15, 2019, an employee was painting lines on pavement when the paint can fell and exploded. The employee's face was struck and lacerated by the can.",0
"An employee was operating a hoist to move steel I-beams and set up an area. As he was moving an I-beam, it bumped into another I-beam and caused it to fall over. The falling I-beam landed on the employee's left leg, breaking it. He was hospitalized and had surgery.",1
"On October 15, 2019, an employee was attempting to clear a jam on an extruder machine when the employee's right hand made contact with the extruder's rotating screw, resulting in a partial amputation of the right index finger at the first knuckle.",0
"An employee fell off a step ladder while hanging an extension cord, suffering a broken tibia.",1
"A joint of pipe that had an end hook was conveyed into the CNC machine. In order to process the hooked material, an employee decided to shim the pipe. He was holding a shim next to the pipe with his right hand while his left hand was resting on the chuck ring. He activated the foot pedal that engages the self-centering arms to align the pipe and clamp the jaws. Once the pipe was aligned, the jaws clamped on the pipe and the centering arms retracted, causing the employee's left middle finger to be caught in the chuck ring. He suffered a left middle fingertip amputation.",0
"An employee was installing a displacement ramp onto a light-capacity rough-terrain forklift chassis. The employee's left middle finger was caught between two pieces of equipment, causing the amputation of the tip.",0
"An employee was striking a nail with a hammer when it ricocheted and struck him in the corner of an eye under his glasses, severely rupturing the globe. He was hospitalized and had surgery.",1
"On October 15, 2019, an employee was attempting to secure a barge when his right hand was crushed and lacerated by the winch wheel.",1
"An employee was on a step stool scanning price tags when the employee fell to the floor, suffering a hairline fracture to the pelvis.",1
"An employee was working on a basket that was attached to a forklift when he fell with the basket to the ground, breaking an arm and ribs.",1
"Two employees were working in a man-made basket that was tied to the clamps and mast of a powered industrial truck. The basket was raised 7 feet when a safety attachment broke and both employees fell to the ground. One employee was hospitalized with a fractured right elbow, fractured right ribs, and a punctured right lung.",1
"An employee was walking toward the customer service desk when she slipped on something and fell to the floor, breaking her hip.",1
"An employee was walking through a door when it closed on his little finger, amputating it.",0
"An employee was installing a pumping unit at a well site. The employee was measuring a rod with a tape measurer when the rod slipped through the safety clamps. The employee's fingers were crushed between the rod clamp and load cell, resulting in amputations of the right index and left ring fingers.",0
"An employee was performing a parts replacement on equipment when a stainless steel mesh part struck his hand, causing a laceration through his leather work glove. He was hospitalized, requiring stitches and surgery.",1
"An employee was attempting to put a chain on a sprocket, turned on the power for the sprocket to rotate, and his right middle and ring fingers were caught between the sprocket and chain, resulting in finger amputations.",0
"An employee was unloading a shipment of mattresses from a truck at the loading dock. The employee slipped and fell about 18"" from the loading dock to the ground floor. The employee was hospitalized with a fracture to the humerus in the right elbow.",1
"An employee was removing a valve that had been heated to liquify the solder binding the valve to a pipe. Oil had collected in the piping at the valve; when the valve was removed, the oil ignited and caused first-degree burns to the employee's face and second-degree burns to his wrist.",1
An employee had placed a truck on a lift to perform vehicle maintenance when the truck fell off the lift and struck the employee. The employee sustained a fractured tibia and fibula.,1
"An employee was using a molder machine. As the employee went to remove a piece of wood, his left pinky finger was caught and amputated by the moving gear.",0
"An employee was standing on a roof cleaning gutters. He slipped and fell to the ground, suffering back and wrist injuries.",1
A maintenance technician was grinding on a piece of metal using a 7-inch electric hand grinder when part of the grinding disc broke off and hit the employee in the pelvic region. The employee was hospitalized.,1
"At 2:40 a.m. on October 16, 2019, an employee was working on the cold foil web unit on a press. While the employee was webbing the ancillary piece of equipment with the foil, the press was jogged and the employee's finger was partially amputated.",1
"An employee tripped over an anti-fatigue mat and fell to the floor, suffering a head contusion and a broken left hip.",1
"An employee was milling an active pharmaceutical compound and was exposed to buprenorphine hydrochloride. The employee began vomiting, was lethargic, and suffered a decreased pulse rate. The employee was hospitalized.",1
An employee was working in the plate department when a roller caused a crushing and debridement injury to his lower right leg.,1
"An employee was trying to unclog a jam on a conveyor. The employee fell and got caught in a conveyor sprocket, suffering lacerations to the right thigh. The employee was hospitalized.",1
"When a driver opened the tractor trailer door, the safety strap came off the trailer and product struck the driver on the head, causing him to fall to the ground. The driver sustained a fracture to the lower back.",1
"On October 16, 2019, an employee experienced strong pressure in his abdomen after lifting a 20-pound case of sodas while stocking the cooler. He was later hospitalized due to a hernia.",1
An employee fell 15 feet during a ready-mix batch cleaning operation. The employee landed on the ground and suffered a broken sternum and a broken vertebra.,1
"An employee was removing rigging from a deck panel. When a crane raised the panel, it struck and lacerated the employee's right inner thigh as it moved.",1
An employee was sliding a single mold pouring pan with a cast tree on it. The employee moved the pouring pan by hand onto the forks of a powered industrial truck (PIT). When the pan was moved the cast tree fell over. The employee attempted to grab the tree to stop it from falling. Molten stainless steel poured onto their right forearm/hand causing second degree burns requiring hospitalization.,1
"An employee was counting money in a small safe. The safe's door closed on the employee's right middle finger, which was amputated at the first knuckle.",0
"An employee was walking between cash registers when she tripped on a floor mat and fell, striking her left knee on the floor.",1
"An employee was training a new hire on the milk selection process, which involves the use of a portable (wrist mounted) RF scanner and a powered pallet jack. He was walking backwards behind his jack when the lower part of his left leg was caught between the pallet jack and a stationary jack. The impact fractured his lower left leg requiring hospitalization and surgery.",1
"While tearing down a roof, an employee fell through a weak spot, suffering broken ribs and a lung collapse.",1
An employee mis-stepped while getting off a tour bus. The impact onto the ground surface caused a compound fracture to their leg requiring hospitalization.,1
An employee was preparing the next drill location when a rock fell onto his right foot. He sustained fractured toes and lacerations to the foot.,1
"An electrician was working on a circuit breaker at a private residence. When the employee's wrench touched a live wire, he was shocked and sustained electrical burns requiring hospitalization.",1
An employee suffered an amputation from a saw.,0
Three employees were trying to unjam a buckled service door using a forklift. They were using the forks to put pressure on the front of the door. One employee's fingertip got caught between the forks and the steel service door. The employee sustained a partial amputation of the left middle finger.,0
An employee was caught between two rolls of paper as they proceeded off the paper machine. He sustained a pulled muscle in the pelvic region and back pain.,1
"An employee was operating a wood notching machine when the machine made contact with his fingers, resulting in partial amputations to three left-hand fingers.",0
"As an employee turned to walk from his computer station to another area, his feet became entangled in the hoses of an air/wet polisher. He fell to the concrete floor, suffering a broken left leg.",1
An employee was working at a cash register. A metal shoplifting alarm pin lodged in her wrist. She was hospitalized and the pin was surgically removed.,1
"An employee was installing springs on a pickup truck. He was using a wrench and another part to compress the spring on the rear of the truck. The part slipped, causing the spring to snap back and  pinch his hand between the spring and the frame of the truck. He was hospitalized with a fractured right hand.",1
"An employee fell off a step while leaving a cash register area, landing on the floor and suffering a broken hip.",1
"An employee slipped on food on a classroom floor while cleaning after children's lunch, dislocated the right hip.",1
An employee was on top of a tanker truck using a tape measure to check the depth of the waste blood being pumped into the tanker. He was later found unresponsive laying near the open hatch of the truck with his right arm and head in the access hole on top of the tanker truck. He also had a cut on his forehead and suffered possible exposure to hydrogen sulfide.,1
An employee was helping an excavator operator with ground operations. The excavator bucket was swinging to pick up a scoop of dirt when dirt that was stuck to the outside of the bucket broke loose and hit the employee on the back. The employee suffered a back fracture.,1
"An employee was performing hydroblasting activities when the hydroblasting device's wand came back and struck the employee's right leg, lacerating it.",1
"An employee was standing on a delivery truck, trying to move a 700-pound pipe. The employee fell off the truck, landing 8 feet below; the pipe then fell on him and broke his pelvis.",1
An employee was opening a box and walking when he tripped over a pallet and struck the floor. He fractured his hip and required surgery.,1
"An employee was using a three-step stool to count inventory. She fell from the last step as she climbed down, landing on the floor and breaking her right wrist.",1
An employee was servicing a lavatory on an airplane using a cart that connects a hose to the waste port to evacuate waste off of the airplane. The employee stood up beneath the aircraft engine and hit their head on the engine's oil drain mast. The employee suffered a concussion and bruising on the head.,1
"On October 17, 2019, an employee fell approximately 5 feet from an extension ladder while cleaning a solar panel at a gauge station. He landed on his back on top of the ladder, breaking a back bone and requiring hospitalization.",1
"While working on a roof, an employee fell through foam board insulation to the ground. The employee suffered a back injury and was hospitalized.",1
"An employee was pulling control cable from a control house to a manhole. A pull rope was pulling the cable through the manhole; the employee's right ring finger was pinched under the rope on the spool, and the tip of his finger was amputated at the first joint behind the nail.",0
An employee's big toe on their right foot was partially amputated when an outrigger on the laser screen machine was dropped on it.,1
"An employee slipped and fell backwards into a box while entering a sit-down fork truck, suffering a fractured vertebra.",1
"An employee was cleaning gutters from a ladder. He fell from the ladder, landing on his head 15 to 20 feet below. He suffered skull and facial fractures.",1
"A car struck an employee in a parking lot, causing head and leg injuries.",1
An employee handling frozen turkeys felt severe pain in his abdomen and was hospitalized with a hernia.,1
"An employee was helping load equipment into a truck. A stack of equipment was pushed into the equipment bin the employee was working on, and the bin in turn crushed the employee's right middle finger against the truck wall. The fingertip was amputated.",0
"Employees were installing a 54-inch pipe. Both the manhole and pipe were inside a trench box. While operators were repositioning, the excavator slid down in the mud, causing the pipe to move further into the manhole. An employee was pinned between the interior wall of the manhole and the pipe. The employee was hospitalized with leg and abdomen bruising.",1
"On October 16, 2019, an employee was operating a shape pad machine. The pads were sticking to the bottom roller and under the felt lubrication bar. The employee adjusted the bottom vacuum unit while knocking pads off the bottom roller. The top rollers caught the employee's right index finger, crushing it. The employee underwent surgery that included removing a piece of bone.",0
An employee was crimping six wires together using a crimping press. The dies closed on the employee's right index finger amputating the tip. The machine was unguarded at the time.,1
"An employee tripped and fell while walking down the steps outside the shop. She had her lunch bag with her, and that bag had a paring knife inside. When she fell, the knife punctured her left lower abdomen, requiring hospitalization.",1
"On October 22, 2019, an employee suffered a right index finger amputation while working with a precision surface grinder machine.",1
"An employee was coming back from break when he slipped and fell to the ground, breaking his ankle.",1
"An employee was rigging a steel beam with an overhead crane when the overhead crane was impacted by a second overhead crane on the same rail. The steel beam shifted and impacted the employee, who suffered a broken left leg and ankle.",1
"An employee was cutting a ply board with a skill saw when the employee's glove and left hand were pulled into the saw, resulting in a partial left index finger amputation.",0
"On October 17, 2019, an employee was using a shrink wrap machine to wrap cardboard boxes of plastic bottles on a pallet when his right thumb was caught in the wrapping process, causing a soft tissue amputation.",0
"An employee was using a cheese conditioner machine. While the machine was rotating, his left middle finger and left index finger were amputated.",0
"An employee was straightening the foot pad of a filler machine when the machine shifted and crushed the employee's left middle finger, resulting in a partial amputation.",1
"An employee was using a power drill with a connected ground wire. The employee was drilling some holes when the wire became wrapped on the drill head. The employee's finger was then caught between the wire and drill, resulting in a left middle fingertip amputation.",0
"An employee was polishing a part in a rotating lathe, using a sandpaper strip. The sandpaper and the employee's right hand were pulled into the lathe. The employee suffered a cut finger and a broken right arm above the wrist.",1
"An employee was attempting to reposition a ladder while standing on the third rung when the employee lost footing and fell to the floor, suffering a concussion and requiring hospitalization.",1
"An employee was feeding a sheet of metal into a shear machine when his finger came in contact with a spring in the machine, resulting in a left middle finger amputation.",1
"A roofer was climbing to a penthouse roof from the main roof, using a fixed ladder on the building. He slipped and fell, injuring his lower legs.",1
"A employee slipped on wet pavement while walking to her car, fracturing her patella.",1
An employee was using a jackhammer to clear a conduit obstruction. The jackhammer struck the top of the employee's left foot just before the big toe.,1
"An employee fell off a lift gate while product was being unloaded, suffering a broken left leg and a collapsed lung.",1
An employee was cutting wood using a table saw when the saw amputated approximately half an inch from the middle and ring fingers of the left hand.,0
An employee was loading ham into a machine. His left index fingertip was amputated by the machine's product metal detector.,0
"A landscaper was mowing the grass at a high school, using a stand-up riding mower. A hole, tree stump, or root caused the mower to bounce and his right foot was caught between the mower's deck and its discharge platform. He suffered a broken toe and was hospitalized.",1
"On October 17, 2019, an employee fell out of the back of a trailer to the ground, suffering a broken collarbone and a head injury that required staples.",1
"An employee was outside the back of the store, carrying a plastic tote of parts for delivery, when he tripped and fell down a flight of eight stairs, striking his head on the pavement. He was found unconscious at the base of the stairs. He suffered a head laceration and cranial fracture.",1
"An employee was walking down a hall. She turned, tripped, and fell to the floor, suffering fractures to both upper arms and her right shinbone. She was hospitalized.",1
"An employee was unwinding a winch when his left middle finger was pulled into the winch, resulting in an amputation to the second knuckle.",0
"An employee was riding a mule up a trail. The mule lost its footing, and it and the employee tumbled down the mountain. The employee suffered a broken sternum, six broken ribs, and lacerations to the head and arm.",1
"An employee was approximately 3 feet up on a free standing ladder looking at and cleaning site glass on a water knock when the ladder twisted, causing the employee to fall to the ground. The employee sustained a head injury.",1
"An employee was climbing a ladder when it slid, causing the employee to fall 2 to 3 feet to the ground from a flatbed truck. He received a compound fracture to his lower right leg.",1
An employee was aligning a mold with his finger using a hydraulic jack trolley when the valve power brake was pressed which lowered the valve onto the employee's middle finger and amputated the fingertip below the nail.,0
"An employee was driving a forklift and he reached down to pick up a loose piece of banding. As the forklift drove forward, the banding was wrapped under the forklift. His finger was caught between the forklift and banding, resulting in a fingertip amputation.",0
"An employee was carrying a tray to the kitchen and something was blocking the kitchen door. The employee tried to push the door open. The door came back and hit the tray, which struck the employee in the throat area. The employee suffered blunt neck trauma and respiratory failure.",1
"An employee was operating a stand-up forklift, traveling across the end of an aisle. A ride-along pallet jack struck him as it exited the aisle. His leg was broken and he was hospitalized, requiring surgery.",1
"In the thermal forming department, a machine was shut down because the sheet was wrapped around the rolls. The sheet was cleared, and the leader sheet was in place to start the line. During the start-up process, the sheet broke away from the leader sheet.  An employee was on the east side of the chrome-roll stand between the scanner and draw rolls. The employee was trying to save the sheet and manually hand feeding the sheet into the draw rolls when his hand was caught between the rolls and his arm was pulled in. He suffered injuries to his fingers, hand, and arm up to the bicep and internal bleeding.",1
"An employee was adjusting a chain on a sprocket. His right index finger was pinched between the chain and the sprocket. The fingertip was partially amputated, with a partial loss of the nail. The machine was unguarded at the time.",0
"While removing a truck bumper, an employee stood up, lost consciousness, and fell hitting their head on the floor. The employee suffered a concussion.",1
An employee was operating a tube mill machine. The mill fractured the employee's right little finger.,1
"While valet parking, an employee put a car in park but the car kept moving. He fell down and his right hand went under the bumper. His right-hand pinky finger was crushed, requiring stitches.",1
"An employee was caught between a hoist hook and a mold, resulting in the amputation of the left middle fingertip.",1
"An employee was installing guardrails on a one-tier scaffold. The employee fell onto a mound of dirt on the ground, suffering a broken ankle and a dislocated knee.",1
"An employee was operating metal shears. The shears' hydraulic stop crushed the last joint on the employee's left little finger, leading to an amputation.",0
"An employee was cleaning out an injector line in a milling area. The employee's right index finger was caught in a butterfly valve when the machine cycled, causing the amputation of the finger.",0
"An employee was attempting to move a roller bed from a cooler entrance when his left thumb was pinched, resulting in a left thumb tip amputation.",0
"A frac pump was running at a well location. An employee heard a rattling sound and walked over to investigate. A maintenance packing bar was laying on top of the pump. When the employee got even with pump, the packing bar slipped into the pump, which kicked the packing bar back out. The packing bar struck the employee in the right eye, causing right eye orbital socket fractures.",1
"An employee was pulling a cart when it rolled up onto the employee's ankle, cutting the Achilles tendon.",1
An employee was cutting an exhaust pipe when the metal blade shattered and a piece of it lodged in the employee's neck. The employee was hospitalized.,1
"A maintenance employee was cleaning a moving drive chain on a conveyor belt when the employee's hand was caught in a pinch point in the machinery, resulting in a fingertip amputation.",0
"An employee was walking along the top of a block wall to pull a tarp over a trailer in the loading pit. The employee slipped and fell to the concrete floor about 4.5 feet below, suffering several broken ribs.",1
"Cookies were getting hung up on a cutter on an oven. An employee was clearing the jam when the cutter activated, amputating the employee's middle fingertip.",0
An employee fell 13 feet from a roof and was hospitalized.,1
"On October 18, 2019, an employee was using an access ladder to access another level of a water tower to remove tools. He stepped off of the ladder onto a ceiling that he thought was a platform. He fell through the acoustic ceiling approximately 15' to the ground, fracturing his lower spine.",1
An employee was installing a backyard utility pole. The employee was climbing the pole with foot spikes when the employee fell approximately 12 feet onto bushes and grass. The employee suffered a back injury with possible compressed vertebrae.,1
"While an employee was attempting to change a leaking O-ring on an excavator's hydraulic line, a sudden release of hydraulic oil startled the employee. The employee fell back off the catwalk and down about 11 feet to the barge below. The employee hit a concrete ballast block, suffering several broken ribs, a broken pelvis (in three places), a concussion, a laceration of the ear, a fractured wrist, and a broken cheek bone.",1
"An employee fell off a beam while installing an HVAC unit, suffering a broken rib.",1
"An employee tripped on a rug while walking up to a store's front registers. The employee fell to the floor, suffering bruises to the head and left shoulder and a right knee injury that required surgery.",1
An employee fell from the roof of a building.,1
"An employee fell through the roof of a job site building, suffering a fractured wrist and hip as well as head trauma. The employee was hospitalized.",1
"An employee's hand was caught between a roll of paper and a machine mechanism while the paper was being loaded into the machine. The employee suffered a partial amputation to the right ring finger, losing the pad of the first knuckle and part of the bone.",0
"While stocking shelves, an employee stood up, became dizzy, and fell to the ground, suffering a shoulder injury.",1
"Two employees fought, and one suffered neck, back, and head injuries, including an eye injury that required surgery. The employee was hospitalized.",1
"At 12:53 a.m. on 10/19/2019, an employee was running to her car in the parking lot when she slipped and fell. She injured her head, suffering a concussion and possible brain swelling/bleeding.",1
An employee was cutting meat with a band saw and amputated three fingers.,0
An employee was performing work on an electrical switch gear and suffered arc flash burns.,1
"An employee tripped and fell on cardboard while walking, breaking a rib.",1
An employee was opening a box with a safety cutter when the cutter severely lacerated his left arm and wrist.,1
"An employee was cleaning a depositor spool valve when his right middle finger contacted the valve's rotating parts, resulting in a fingertip amputation at the first joint.",0
An employee was cutting a plywood form with a circular saw. The sawblade caught the metal lifting strap for the inlet structure and jerked the saw in a new direction. It cut into the employee's left hand and wrist.,1
An employee was cutting open a salmon packet when his knife amputated the tip of his left index finger.,0
An employee was in a patient's residence when she bent down to pick something up and hit her head on a table. She was hospitalized with a head injury.,1
"An employee was rolling a trash can out a door when he slipped and fell, breaking his leg.",1
"An employee was performing flagging duties in a work zone when a motorist drove into the work zone lane closure and struck the employee. The employee suffered a head laceration and fractures to the shoulder, pelvis, and leg.",1
"On October 19, 2019, an employee was assembling a rock hopper. The bottom part fell and the employee's finger was caught between the base of the hopper and the concrete floor. The employee suffered an amputation to the right middle finger.",0
"An employee was working on a sand conveyor, using the jog switch with a key interlock to run the belt up and down identifying bad bearings, as well as installing a cover. Power to the conveyor was turned on and it amputated the employee's left middle finger.",0
An employee was walking out of a building when a forklift struck her. She suffered a broken left foot and hit her head.,1
An employee was stocking freight and saw a spider. She killed the spider and then experienced heart attack symptoms and was hospitalized.,1
"An employee was walking into the building for a project management meeting when an AC unit fell from the roof, striking the employee and knocking him to the ground. He suffered injuries to the ribs, lung, and collarbone.",1
An employee opened the release latch on the bottom of a mixer to allow materials to exit the hopper. His hand then entered the latch opening and the mixer severed his left index finger. The mixer was turned on at the time of the incident.,1
"An employee was helping a trucker load material. A power pole shifted on the trailer, causing it to roll. The employee jumped off the trailer bed to the ground to avoid the pole and broke his left ankle and tibia.",1
"An employee was climbing an extension ladder with a spray rig gun in his right hand. The trigger to the spray gun was hit accidentally while the gun's extension was resting on his palm below his left index finger. The spray rig discharged, and the pressure cut through the skin and injected paint into the palm of his hand.",1
"An employee was retrieving a sample solution from a drain valve located near the bottom of the kettle when a hot chemical (caustic) solution spilled over the top of the kettle and burned the employee's back, left side, and leg/foot.",1
"An employee using a step ladder to replace a cosmetic event sign fell approximately 4 feet from the step ladder to the floor level, suffering a couple of broken ribs.",1
"An employee was working on a compressor and attempting to dump a scrubber on the compressor. At the time, the scrubber would not dump because it had frozen up. The employee opened a valve and gas began to exit the valve, causing a flash fire. He sustained second and third degree burns on the face and hand, requiring hospitalization.",1
An employee was cutting fish on a band saw when the saw amputated the employee's right index finger.,1
"An employee was doing maintenance at a sawmill. While getting ready to start the chip heads, he leaned in to observe a chain. The chain moved into position and caught the employee's right leg. He suffered a broken femur and was hospitalized requiring surgery.",1
"On October 20, 2019, an employee was acting as a rock climbing guide and walking across a gulley when the employee fell about 30 feet to the ground. The employee was hospitalized with head trauma, eye injuries, and fractures to the pelvis.",1
"An employee was climbing a ladder to enter a trailer when a gust of wind blew the trailer door open, causing the employee to fall off the ladder and sustain a concussion.",1
"An employee was stabbing a piece of casing with a backhoe when a joint of pipe struck him in the leg, causing bruising and soreness of the lower leg/shin area.",1
An employee was extinguishing a grass fire and was overcome by smoke inhalation. The employee was hospitalized.,1
"An employee was helping a retirement community resident when she tripped on an electrical cord and fell to the floor, breaking her hip. She was hospitalized.",1
"An employee tripped on a box of plastic bags and struck her head, requiring hospitalization.",1
"At approximately 1400 hours on 21 October, an employee was cutting wood using a table saw when the wood kicked back and struck the employee's lower body.",1
"On October 21, 2019, an employee was observing a log being removed from a damaged tree when the log swung and struck the employee. The employee was hospitalized with a fractured skull and collarbone.",1
"An employee was climbing into his truck to get asphalt when his leg became tangled in a chain and he fell 3 feet to the ground, fracturing his left leg.",1
"An employee was moving scraps on an assembly line. She was sitting down beside the conveyor belt with her hand resting on the conveyor belt. The conveyor belt is automatic and turned on. Her cotton glove was caught in the belt, resulting in the left index finger getting caught between the chain and the frame. She was hospitalized with a lacerated/broken left index finger.",1
An employee was cutting lumber and pushing wood through a table saw when the saw amputated the employee's left ring finger.,0
"An employee was walking behind meat slicers in a deli department. The employee slipped on a piece of lunch meat on the floor and fell backwards, striking her head on the floor.",1
"On October 21, 2019, an employee was guiding a rope to prevent it from catching/rubbing on a piece of equipment while millwrights (contractors) were installing/pulling the belt up into a leg housing. The rope then broke, causing the employee to fall backwards on the gravel parking lot (same level) and land on their shoulder. The employee then stood up for about 30 to 60 seconds and fainted, falling to the ground (same level) and striking their head. The employee suffered a separated right shoulder and collarbone and a laceration to the skull.",1
"An employee was operating a press brake. His hand was inside the die area when the press brake was activated via the foot pedal. His hand was caught in the die, resulting in the amputation of three right-hand fingers.",0
"An employee was trying to attach a bridle to a horsehead on a pumping unit. The horsehead became detached and fell from the walking beam on the pumping unit, striking the employee in both legs. The employee suffered a broken right kneecap.",1
"On or about October 21, 2019, an employee had just removed an empty pallet off a stack and slid it onto the floor when the employee felt a sharp pain in the lower back hip area. The employee had a back spasm and was hospitalized for a back sprain.",1
"Two employees were making repairs to HVAC equipment. A fan blade struck one of the employee's finger, resulting in a left pinky fingertip amputation.",0
"While attaching a lifting sling to a truck, an employee was struck by a backhoe bucket. The employee suffered a right hip injury.",1
"An employee was trying to install a transmission in a clutch assembly. The transmission would not go into the clutch due to a plate that had moved. When the clutch was unbolted, its weight caused it to fall and crush his right middle finger against the flywheel housing.",1
An employee was closing an overhead door when his right little finger was caught between the door and the doorjamb (on the latch of the door).,0
"On October 21, 2019, an employee was using a rolling cart to move a center console toward a boat. The cart tipped over, striking and injuring the employee's lower back. He was hospitalized.",1
"An employee was pulling a nail out of a board with a claw hammer when it flew into his right eye, impaling it and requiring surgery.",1
"A temporary employee was working with a rivet machine when it triggered, causing an amputation to the employee's right thumb.",0
An employee was using an air-powered nail gun to attach a piece of wood to a crate when the tip of the nail gun turned sideways and a 2-inch nail went into his left hand which was holding the piece of wood. The employee was hospitalized.,1
An employee was repairing a downspout. The employee's right middle finger was crushed in the downspout hole and amputated.,0
"An employee was standing in front of stacked bales when a 1,200-pound paper bale fell and struck him. He was hospitalized with internal injuries and a right leg injury.",1
"An employee was using a rolling ladder to install window signs. He fell from the ladder and hit his head on the concrete sidewalk, suffering a head laceration.",1
"On October 21, 2019, at approximately 10:15 p.m., an employee was emptying a hopper into a hog. He used his hand to release the bottom lever when it snapped back and caught his left middle finger, causing a partial fingertip amputation.",0
"An employee was using a portable table saw to cut wood for a crate when the saw blade made contact with the employee's left hand, amputating part of his left ring finger at the middle joint and partially amputating the middle finger on the same hand.",0
"An employee was walking to another building when she tripped over an uneven sidewalk. She sustained a fracture to her left knee and right wrist, requiring hospitalization and surgery.",1
"An employee was working near a grader that was cutting the road. The employee went to push a roll of plastic and it caused him to stumble backwards. The grader then ran over and fractured his left ankle, causing him to fall backwards and sustain a second fracture on his left arm.",1
"An employee fell down a set of stairs, suffering a broken clavicle and brain bleed. The employee was hospitalized.",1
"An employee was hand loading 8-inch x 18-inch cement cinder blocks from a store's lumber yard onto a customer's vehicle. The employee wrenched his back and was hospitalized for a possible pinched nerve, slipped disc, or spinal injury.",1
"On October 21, 2019, an employee was installing the rails for solar panels on the low pitched roof of a residence. When he walked backwards to check the alignment of the rails, he fell 10 feet to the ground. He landed on his feet and suffered two broken heels, requiring hospitalization. Fall protection equipment was not worn at the time of the incident.",1
"On October 22, 2019, an employee operating a forklift struck a vertical metal aspirator stand. The employee's finger was crushed between the aspirator stand and the forklift side rail, resulting in a surgical amputation to the first knuckle.",0
"On October 22, 2019, an employee was cutting a vinyl floor plank on a table saw. The sawblade amputated the employee's right little finger at the middle.",0
"An employee was repairing a skid steer loader, draining the hydraulic lines. The bucket, which had been raised in the air, came down, hitting the overhead cover of the engine compartment and striking and trapping the employee. The employee suffered a broken jaw and facial bones.",1
An employee had just adjusted the meat in a meat cutter machine when his left index finger was pinched between the machine's moving parts. He suffered an amputation to the finger.,0
"An employee fell 12 to 14 feet down into an open hatch on a vessel and hit the floor, fracturing an arm and requiring hospitalization.",1
"An employee was attempting to remove a chunk of concrete from a hopper when his hand was caught in the concrete pumping mechanism, amputating four fingers on his right hand.",1
"An employee was climbing a fixed ladder in order to perform maintenance services on a cooling tower. During the ascension of the fixed ladder, he fell about 14 feet to the ground onto his left side. He was hospitalized with broken ribs, damaged vertebrae/collarbone, and a bruised lung.",1
"An employee was using a tarp to cover an overbleed stack. He slipped on the tarp and fell, landing on a solid metal surface and breaking his pelvis.",1
An employee was packing boxes using an electric tape dispenser when the machine became jammed. The employee was attempting to clear the jam when the machine started. The tape dispenser blade then amputated the employee's left index fingertip.,0
"An employee was loading personal items into his truck in preparation for a delivery. He was holding onto the outer handle of the truck cab when it broke. He then fell to ground, fracturing three ribs and his pelvis.",1
An employee's right index finger was caught between the double doors of a paint booth. The finger was amputated.,1
Two fingers in an employee's left hand became stuck/crushed in a pizza dough rolling machine.,1
"An employee was filling a can with alcohol. The alcohol ignited and splashed onto the employee's hand and arm, igniting her clothing. She suffered second-degree burns to the hand and arm.",1
"An employee was getting a flu shot when the employee experienced nausea, dizziness, chest pressure, palpitations, and shortness of breath.",1
"An employee slipped and fell to the floor while bending over to pick up paper off the floor, breaking an ankle.",1
"An employee was climbing down a 28-foot fiberglass extension ladder when the base of the ladder became unstable and slid down a small incline and out onto the street. The ladder was struck by a moving vehicle, resulting in the employee falling 20 feet. The employee suffered a fractured right hip, cracked rib, and broken nose.",1
An employee was removing condensation from a vacuum when the blades in the vacuum amputated a fingertip.,0
"An employee was operating a motorized push cart when the employee's right index finger was caught between the lever on the push cart and frame of a home being built, resulting in a fracture and partial fingertip amputation.",0
"An employee was operating a forklift when he ran into a steel column. Upon impact, he struck his head against the overhead lift cage. He was hospitalized for a laceration, requiring stiches and surgery.",1
"An employee was walking to her car in the dark when she slipped on wet leaves in the parking lot and broke her ankle, requiring surgery.",1
"An employee was struck by another employee who fell from a ladder, suffering a neck injury that required hospitalization.",1
An employee was replacing a chain when their finger got caught in a chain hole. The chain then moved and crushed the employee's finger resulting in amputation of the right index finger.,1
An employee was cutting a metal stud with a band saw when the saw got in a bind and pulled his hand into the blade.,1
"An employee was doing maintenance work on a mixer shaft. The shaft rotated and struck him in the head, smashing his face against a forklift mast. He suffered facial fractures.",1
"On October 22, 2019, an employee was pushing a dolly containing boxes of cleaning supplies down the ramp when he slipped and fell. He was hospitalized with a muscle injury to a leg.",1
"An employee was working as a crew member at a substation when the employee placed a test lead from a tube stick on an energized conductor.  An arc flash occurred, causing thermal burns to the employee's face and chest.",1
"An employee was on a ladder to clean gutters on a residential home. The ladder became displaced from the base and the employee fell to the ground, spraining his ankle and requiring hospitalization.",1
"An employee was performing a procedure on a patient when she cauterized her right index finger near her palm. The next day, she noticed that the injury was getting worse and was hospitalized.",1
"On October 22, 2019, an employee began having muscle cramps after a day servicing customers' lawns. He was hospitalized for dehydration.",1
"On October 22, 2019, an employee was using a hydraulic bolt tensioner when a seal failed, shooting pressurized hydraulic fluid in the employee's face. The employee suffered a laceration from the lip to the ear on the side of the face.",1
"An employee was heating a mold. A propane tank exploded and the employee was knocked to the floor, suffering a broken wrist and burns to the body.",1
"An employee was delivering furniture to a home location. He struck his head on a low hanging wall while walking down stairs and fell, striking a concrete landing. He was hospitalized with a head injury and concussion.",1
"An employee was bitten by a rattlesnake on the left middle finger while installing a moisture barrier at a customer's residence, suffering swelling and soreness. The employee was hospitalized.",1
"An employee was attempting to rotate the drum of a commercial washing machine when his fingers were caught between the drum and the housing of the machine, cutting three fingers and amputating the tip of his second left finger.",0
"An employee was hanging a steel beam as part of a new construction project. The employee fell about 14 feet from the beam, suffering a broken hand and a head injury.",1
"An employee was opening the parts plate after a cycle on a compression molding machine. As the upper plate opened, the employee noticed a part stuck in the upper plate. The employee reached in between the upper plate and the tool to reach the stuck part. As the employee reached in, the hook from the hoist chain released and the upper plate fell down onto the employee's hand, causing a burn injury.",1
"An employee was on horseback herding cattle in the penning arena. When a calf/steer ran into his horse, the horse reared up and threw the rider against a fence and onto the ground. The employee was hospitalized with a head injury and a broken arm requiring surgery.",1
"An employee was putting grams into a machine. The employee opened the screen and was using the left hand to move the gram when the employee's left middle finger was caught by the moving auger inside the machine, amputating the fingertip.",0
"An employee was splicing piles when the upper pile, which was suspended by a crane, broke free, swung, and struck the employee in the back, resulting in broken vertebrae tips and requiring hospitalization.",1
"An employee was trimming a plant with his pocket knife when his hand slipped and the knife cut his left forearm, causing an arterial laceration.",1
"An employee was performing a tire change on a forklift and in the middle of inflating the tire, the tire blew up in his face. He was hospitalized for injuries to his face and jaw.",1
"An employee was handling a rope (tagline) while removing a lid from a barge. A gust of wind moved the barge lid, causing the rope to jerk around the employee's thumb and resulting in an amputation of the right thumb.",0
"After trimming a tree, an employee was taking off climbing gear while on the ground. The employee was removing the right climbing gaff and slipped, causing the gaff to impale the employee's left calf.",1
"An employee was cleaning a machine when the employee's thumb became stuck in the machine, amputating skin from the thumb.",0
"An employee was trying to transfer molten wax from a bulk container. During troubleshooting, a cap was removed from the line and the wax sprayed on the employee's right hand and forearm resulting in burns.",1
"An employee was holding a tagline during a lifting operation at a wind farm when a crop duster aircraft flew between the wind tower and tagline that the employee was holding. The aircraft struck the tagline, which caused the employee to be lifted into the air and subsequently land on his back on the ground. He suffered a fractured L1 vertebra.",1
"An employee was working on electrical power lines at a substation. An arc flash caused the employee to jump out of the bucket to the ground. The employee suffered a broken leg, a broken pelvis, and two broken ribs.",1
"An employee was unloading empty pallet carts. Tension was applied to a flat metal winch hook, and his middle fingertip was pinched between the hook and a pallet cart. He suffered a partial fingertip amputation.",0
"An employee was working in a scissor lift, replacing the ground wire in an electrical box. The employee came into contact with the live wire and an arc flash shocked the employee with 480 volts, causing first- and second-degree burns to the employee's face and arms.",1
"While performing duties as a valet, an employee was walking to the designated valet service parking lot to retrieve a customer's vehicle and was struck from behind by a pickup truck.  The employee was knocked down and his left leg was run over. The employee sustained a broken left tibia, three broken toes on the left foot and torn tendons in the left leg.",1
"An employee was waiting to pull product from a pallet inverter machine to load the product into a wrap machine for storage. A second employee was operating a forklift to pull the product from the machine. The second employee lowered the forklift bucket, and the first employee stepped in front of the pallet of product and was struck by the forklift's right fork. He fell to the ground, sustaining a laceration to his left foot and a broken heel.",1
"Two employees were working inside a truck trailer to repair it. One employee was installing a scuff plate while the other sprayed an adhesive to help install the next scuff plate. The first employee's cordless drill ignited fumes from the spray adhesive, creating a flash fire that caused first- through third-degree burns to the employee's face, hands, neck, and leg.",1
"An employee had been setting forms for concrete and became ill. The employee was shaking and unresponsive, due to possible heat stroke.",1
"An employee was using a handheld cup-shaped grinder on a manhole cover. The cup flew off, striking the employee on the right knee and hand. He was hospitalized.",1
"On 10/23/2019, an employee was rewinding material and pressing material down when their fingers were pulled into the rewind roller. The employee sustained a broken left forearm.",1
An employee was changing tools on a machine when the employee's left pinky finger was caught between the pusher tool and another tool. The employee suffered a broken left pinky and torn ligament.,1
An employee was walking into a freezer when the employee tripped over a box that was propping the freezer door open and fractured a femur.,1
"An employee was helping assemble a crane by connecting an outrigger pad (shoe) to it. A pin popped out of the shoe and struck him in the face and right wrist, causing fractures to the face, wrist, and nose.",1
"An employee was cutting a veal shank using a bandsaw when the shank bone slipped. The employee's thumb was then cut by the bandsaw, resulting in a partial right thumb amputation.",0
"An employee was working behind the counter when a man entered the store with a container of gasoline, chased her back to the kitchen, doused her with gasoline, and set her on fire. She was hospitalized with 32% burn coverage to the face, neck, chest, and extremities.",1
"An employee was cutting and removing a fallen tree and was pinning down the power line and communication cables. As the tree was being cut and removed, the communication cable sprang up and struck the employee in the face. The employee was hospitalized with facial injuries.",1
"While loading a rail car with monomethylamine (MEA), a transfer operator wiped away sweat with glove covered hands. The gloves had become contaminated with monomethylamine. The employee began experiencing eye irritation and was hospitalized with chemical burns to the eyes.",1
"An employee was working on a roll-down shop door while standing inside a loader bucket for elevation when the door rolled closed and struck the employee in the loader bucket. The employee was thrown to the ground, suffering a fractured hip, right wrist, and left ring finger, as well as lacerations.",1
"An employee was backing up a loaded forklift when it struck a parked pallet jack. The employee's left foot was run over, suffering fractures to the main bone and four toes.",1
An employee was operating a two-roll mill machine and lifting material when the employee suffered a hernia.,1
A contract mechanic was doing maintenance on a baghouse machine. The machine's moving parts amputated the tip of the mechanic's left thumb.,0
An employee was conducting physical training when he felt pain in his upper left shoulder and chest. The employee was hospitalized for pericarditis.,1
"An employee was operating a straightener machine when the employee's hand was caught by a piece of steel that was being straightened, resulting in the partial amputation of the left middle finger and degloving injuries to the left ring and pinky fingers.",0
"On October 23, 2019, an employee was struck by a skid steer as it backed up. The employee suffered a lower extremity injury.",1
An employee was changing a burner tube on a furnace when molten salt poured out of the tube and onto their leg. The employee was hospitalized with third degree burns to the right leg.,1
An employee was climbing down after adjusting a steel pipe loaded on an open railcar when a trackhoe struck him with the bucket's loading attachment device. He suffered a fractured pelvis.,1
"An employee was raking asphalt behind a road paver when the employee was struck by a vehicle, suffering a head injury, fractured rib, and fractured left leg.",1
"An employee tripped and fell while walking on a tile floor, suffering a broken nose, fractured left eye socket, concussion, and subdermal bleeding. She was hospitalized.",1
"An employee was working with a rotatory hammer drill to dill into concrete when his gloved left hand became caught, resulting in amputation of the pinky finger.",1
"At 11:30 a.m. on October 23, 2019, a roofer fell from a fixed ladder while accessing a roof. The roofer landed on the concrete surface below, suffering head trauma and broken ribs.",1
"An employee was filling propane cylinders at a commercial landscape business. A propane line disconnected from a cylinder and sprayed liquefied petroleum gas on the employee's right leg, causing severe cold burns to the leg.",1
"An employee was topping a 100-foot-tall tree. The employee was attached to the tree using a climbing line and a safety line, about 60 feet high, when the tree split below the cutting point. The employee was knocked off the tree and struck by the split section of the tree, suffering a broken right leg, abdominal contusions, and a chipped lower-back vertebra.",1
"An employee slipped and fell while descending a stairway, landing on the concrete floor below and suffering contusions and a head injury.",1
An employee was cutting the banding off a piece of steel with a torch. The steel popped off its resting place and landed on another employee's left leg. The second employee suffered fractures to the left tibia and fibula.,1
"On October 24, 2019, an employee was replacing pulley belts on a dust collector system. The employee's left little finger was caught between the belt and the pulley sheave, causing a partial amputation to the finger.",0
An employee was inspecting an attic when he fell approximately 9 to 10 feet through the ceiling and struck his head on the concrete garage floor. He suffered a head laceration and multiple fractures.,1
"An employee was using a brake press to bend sheet metal. During the second bend, the press caught her right middle finger causing an amputation.",1
"An employee slipped and fell to the floor while walking down an aisle, fracturing the right hip.",1
An employee suffered a left thumb tip amputation.,0
"An employee was unloading packages from a trailer when the employee's right middle finger was pinched between the trailer and an extendable conveyor, resulting in a middle fingertip amputation.",0
"An employee was moving from a roof to a ladder. The employee tripped and fell to the ground below, suffering fractures, abrasions, and a traumatic brain injury.",1
"An employee was shaking vines out of a harvester when he was bitten by a snake on the hand, requiring hospitalization.",1
An employee was attempting to install a grounding rod. A piece of debris struck him in the eye. The debris was embedded and the injury required surgery.,1
An employee was riding on a tractor when he fell off. The tractor's rear tire ran over him and broke his hip.,1
"An AECOM maintenance employee was troubleshooting a malfunctioning encoder device. To access the device, the employee had to stand on top of a tank holding a caustic cleaning solution, about 3 feet off the ground. The employee's left leg slipped through one of the access covers and was immersed in the caustic solution up to the knee. The employee suffered third-degree burns to the lower leg.",1
"An employee was on an extension ladder inspecting gutters on the leading edge of a roof. The ladder slipped and the employee fell with the ladder. The employee suffered a right foot fracture and abrasions, requiring hospitalization.",1
"An employee was getting down from a ladder and missed the last rung, impacting the ground and suffering a fractured hip.",1
"An employee was taking cash out of a vault for a customer when his right thumb was caught in the vault door, severing part of his thumb tip.",0
"An employee experienced dehydration symptoms while conducting lead refining tasks, requiring hospitalization.",1
"An employee was assembling a belt conveyor on a roller conveyor when the belt conveyor tipped over and struck the employee in the head, causing the employee to fall to the floor. The employee suffered a head injury and knee fracture.",1
"An employee was cleaning around a tank. The tank overflowed, splashing the employee with boiling water and causing second-degree burns to his arm and lower legs.",1
"An employee was entering a facility when she tripped on the entrance steps. She fell, suffering a broken hip.",1
"On October 24, 2019, a forklift operator picked up two pieces of granite slabs using a lifter that was attached to a forklift truck. The two slabs weighed approximately 3,421 pounds. The injured employee had his hand on the two granite slabs while the forklift operator was moving them into position to place them on a truck. The injured employee was on the left side of the forklift when the two slabs shifted. The employee moved under the mast of the forklift and the front left tire ran over the employee's leg.",1
"An employee was walking across the parking lot when she tripped over the curb and fell, fracturing her ankle.",1
"An employee was removing a person from a property when the person attacked the employee with a brick, causing severe facial lacerations.",1
"A temporary employee was loading garbage into a hopper of a residential garbage truck. As the packer panel mechanism was activated, the employee's right hand was caught in a pinch point, causing a severe laceration to the thumb from the sweep blade. The employee required surgery.",1
"An employee was adjusting a dock plate when the dock plate fell, hitting the employee's head and chest. The employee suffered a chest contusion and laceration to the hairline.",1
"An employee's finger was caught between a re-bar bender and a table, resulting in a right pinky finger amputation to the knuckle.",0
"An employee was providing therapy to a resident when a fire started in a room across the hall. The employee suffered from smoke inhalation symptoms in her respiratory tract, including throat irritation, dizziness, and weakness. She was hospitalized.",1
An employee was running a drill press. The press caught the sleeve of the employee's welding jacket and pulled in the employee's arm. The employee's arm was fractured.,1
An employee was cutting 3/4-inch EMT conduit with a bandsaw. The saw blade partially amputated the tip of the employee's left middle finger.,0
"An employee was loading dump trucks with an excavator when the gate on a dump truck would not latch. The employee got off the excavator and tried to manually latch the gate shut. At the same time, the dump truck driver was trying to latch the gate with the hydraulic system. The hydraulic system caused the gate to latch and crush the employee's fingertip.",0
An employee was installing recessed lights. A spring struck and punctured his eye.,1
"On October 24, 2019, an employee was trimming floor boards with a table saw when his finger came in contact with the blade, resulting in a partial index finger amputation.",0
"An employee was transporting two sections of 3-inch schedule 50 piping. While the employee was offloading the trailer and moving the pipes from a pallet to cribbing, a pipe slipped and fell onto the employee's right foot; the employee then fell while turning, hitting the ground and suffering a broken fibula and tibia.",1
"An employee was lowering a lift gate on a vehicle. The gate struck the employee's left hand, causing the amputation of the ring and little fingertips.",0
"An employee was helping to unload a generator from a truck when the truck's lift gate actuated, pinching his left leg and fracturing his tibia/fibula. He was hospitalized.",1
An employee was loading a press machine prior to pressing a two-handed device. The two-handed device malfunctioned and the press cycled while the employee's finger was in the point of operation. The employee sustained the amputation of the first digit of the left ring finger.,0
"A temporary employee was struck by a forklift. He suffered five toe fractures, foot fractures, and ligament damage to the left foot. He was hospitalized.",1
An employee was nailing siding with a pneumatic coil nail gun. The gun shot a nail into her foot. She was hospitalized.,1
An employee was working as the lead operator of an extrusion line and was monitoring the operation of the plastics extruder. The employee was standing next to the vent of an extruder machine when hot plastic overflowed from the extrusion line’s vacuum vent. The employee sustained severe burns to his arms and forehead.,1
"While leaving a parking garage, an employee was shocked and burned by electrical wiring that was being tested.",1
An employee suffered an allergic reaction to aerosol air freshener being utilized in the bathroom.,1
An employee was operating a tug when he heard a bang and saw smoke. He jumped from the tug while it was in motion and sustained a broken right femur.,1
"An employee tripped over a cart and fell to the floor, fracturing the left hip and requiring surgery.",1
"An employee was closing a van's sliding door when her right pinky finger was caught between the door and door jam, resulting in a pinky fingertip amputation.",0
"An employee was cleaning a belt. The employee's right ring finger was caught between the pulley and the belt, resulting in a fingertip amputation.",0
"An employee was climbing down from a roof on a ladder. The employee fell to the ground, suffering fractured vertebrae.",1
"An employee fell off a ladder while picking apples, suffering a broken leg.",1
"On October 24, 2019, an employee experienced an anaphylactic reaction likely associated with the cooking of shellfish-containing food(s) in the kitchen/cafeteria area of the outpatient clinic.  Due to the nature/severity of the allergic reaction, the employee was hospitalized.",1
"An employee was unloading drywall at a job site when the load of drywall fell on the employee, fracturing the right femur.",1
While getting up from a chair an employee's boot became caught in the cord of a security scanner. The employee fell to the floor and sustained a fractured hip.,1
An employee was walking by a cooler and tripped on another employee's foot. The employee fell forward into a wall and suffered a broken left femur.,1
An employee was working with the rigging of a piece of metal. The rigging failed and the piece of metal struck the employee's lower body. The employee sustained a fractured hip.,1
"An employee was clearing debris from a conveyor belt using a 2 X 4. The 2 X 4 was sucked into the machine along with the employee's body, injuring his left arm and shoulder, his head, and causing part of his left ring finger to be amputated.",1
An employee was at the bundle squeezer when a bundle went past and the bundle squeezer closed on their finger. The employee sustained crushing injuries to their left index finger.,1
An employee was cutting a notch on a piece of plastic using a notching machine. The machine caught the employee's finger and caused a partial amputation (skin of the nail and nailbed) to the fingertip.,0
An employee was operating a separation table when his right index and middle fingers were amputated in the rotary airlock valve.,0
"An employee was lighting a pilot light on an asphalt heater when a flame came out through the pilot light access point, causing second degree burns over his face, left arm, and right hand. He was hospitalized.",1
"An employee was pulling on a stackable metal bookshelf while a second employee was pushing it. The first employee slipped and fell to the floor, fracturing the T12 vertebra and requiring hospitalization.",1
An employee tripped over a curb and fell to the ground while carrying flowers. She suffered a broken upper left arm.,1
"An employee was working on a railroad car coupling. A piece of metal fell out of the coupling and smashed the employee's finger, causing a fracture and a contusion. The employee was hospitalized.",1
"An employee was standing on an 8-foot A-frame ladder, catching debris in a 5-gallon bucket from a contractor coring through the concrete floor above, when the employee fell from the ladder and sustained a head injury. The employee was hospitalized.",1
"An employee was disassembling a piece of equipment in the strip mill. The employee was removing a shaft. The shaft came out at the bottom once the bolts were removed. The shaft then struck the employee's legs, causing fractures to both legs.",1
"An employee was unjamming a cartoner machine. A chain inside the machine pinched the employee's right index finger, amputating the fingertip.",0
"An employee testing a piece of rebar on a bending machine when his hand was caught between the roller and the piece of rebar, causing an amputation of his right ring finger and pinky.",0
An employee's left index finger was caught between a conveyor and the guard. The fingertip was amputated.,1
"An employee was working on an industrial magnet, removing nuts, bolts, and washers. The magnet got close to another magnet and they snapped together. The employee's right index finger was amputated.",0
"An employee was closing an overhead transformer fuse with an insulated stick. The transformer lid separated; oil sprayed out and burned the employee's back, back of the head, and forehead.",1
"An employee was dumping a container of scrap wood that was attached to forklift forks into a dumpster when his finger was pinched between the container and the dumpster, resulting in a fingertip amputation.",0
"An employee was working on a ladder to remove insulation when the employee fell off the ladder to the floor, suffering a concussion.",1
An employee was cleaning equipment from a 15-foot-high platform. The employee fell and suffered a broken back.,1
"While pushing a vehicle into a parking spot, an employee was steering the vehicle with the driver's door open and walking along side of it. When he reached the halfway point of putting the vehicle into a 
parking spot, his right thigh was caught between the door and the vehicle parked next to him, pinching his upper thigh muscle.",1
"An employee had just finished her shift and clocked out. As she was leaving the hospital, a women approached her with a baby that was not breathing. The employee began CPR and then carried the baby to the ER department. After the incident, the employee reported being short of breath and was later hospitalized, suffering from an aggravation of a neuromuscular disease.",1
"An employee was cutting chicken on a bandsaw when his left thumb contacted the blade, cutting his left thumb tip.",1
"An employee had a three-wheeled sweeper tractor on the hitch of a company-owned pickup truck. The employee exited the truck and tried to disconnect the sweeper from it. When the latch would not budge, the employee grabbed a piece of rebar from the bed of the truck. As the employee pushed the latch up with the rebar, the sweeper popped off the hitch and began to roll away from the truck. The employee chased the tractor as it was traveling down a small hill toward a busy road and was reaching for the brake when the sweeper ran over the employee. The employee suffered two broken ribs, a punctured lung, and bleeding on the brain. The employee also sustained a lump and cuts on the forehead and cuts on the right arm from the bristles of the broom tractor. The employee was hospitalized.",1
"On October 25, 2019, an employee was inside a man lift (18 feet high) installing lighting when the lift tipped over. The employee jumped out of the lift at the last minute as the lift was falling to the ground. The employee was hospitalized with a dislocated right elbow and right heel.",1
An employee was mixing icing when his index finger entered a pump and was amputated.,0
An employee was talking to a co-worker while walking to lunch and tripped over a pallet that was against the wall. The employee fell to the floor and sustained a laceration to the left arm and a fractured elbow.,1
An employee was putting on a bolt when a machine was activated and smashed the employee's hand. The employee was hospitalized and suffered amputation of the right ring and pinky fingers.,1
An employee was opening a blasting pot when pressure in the blasting pot caused the top to blow off and throw the employee off the blasting pot. The employee sustained injuries to the head and arm.,1
"An employee was draining water from a water booth vessel when steam/hot water released from a loose fitting onto the employee's midsection, causing first and second degree burns.",1
A temporary employee was operating a pallet jack when he stepped off the pallet jack. It continued moving and crushed his ankle between the pallet jack frame and a bollard. He was hospitalized with a fractured ankle.,1
An employee was putting plastic scrap into a pallet box. The scrap lacerated his left index and middle fingers. The fingertips were medically amputated.,1
"On October 26, 2019, a crew was performing roofing work in a commercial building. At approximately 4:30 PM, wind was blowing away the TPO (thermoplastic polyolefin) that an employee was installing. The employee tried to grab the TPO and the wind caused the employee to back up towards an old skylight. The skylight broke and the employee fell approximately 50 ft. to the concrete floor. The employee sustained a brain injury and a broken arm and leg.",1
"While bending over to pick up newspapers, an employee lost their balance and fell on the sidewalk, sustaining a fractured hip.",1
An employee fell while walking down an aisle. The employee sustained a fractured femur and dislocated left knee.,1
A maintenance employee made contact with an energized conductor when he was in the process of removing a bolt inside an electrical box (240 volts) with a wrench. This action induced an arc flash. The employee sustained first degree burns to both hands and second degree burns to his left forearm.,1
"An employee was placing cases of product on the floor when he tripped over a wood pallet and fell on his left knee, fracturing it.",1
An employee was checking the hydraulic lines of a skid steer for leaks when two of their fingers became caught in the hydraulics and were smashed. One finger had to be amputated to the nail.,0
"An employee was hooking up a panel on a flatbed trailer. The employee mis-stepped and fell off the trailer, suffering a broken arm and a small brain bleed. The employee was hospitalized.",1
An employee was driving to a service call when individuals in Halloween masks stopped the vehicle and assaulted the employee. The employee suffered a broken jaw and facial laceration.,1
"On October 27, 2019, a temporary employee was taking apart a cheese shredder and contacted the rotating shredder head, suffering amputation of multiple fingers.",0
An employee slipped and fell to the floor while exiting a room in the deli department. The employee sustained a broken left hip.,1
An employee fell 34 feet to the ground through an opening in metal roof decking and sustained a fractured leg and arm.,1
"An employee attempted to crush a box under foot and fell to the floor, breaking the right leg. The employee was hospitalized and had surgery.",1
"An employee was cranking on a jack with their foot to raise up a trailer when the jack failed, allowing the trailer to fall on and crush the employee's second, third, and fourth toes on the left foot and resulting in possible toe amputations.",1
"An employee was unloading a box that was positioned on a pallet. The forklift driver came over to move the pallet. The forks did not go all the way in. When the pallet was moved, it shifted and pinned the employee's left leg between the pallet and a flatbed trailer. The employee suffered hyperextension of the left leg.",1
"An employee walked over the top of a rope extension/partition. Her foot became entangled in the partition rope, causing her to fall and break her hip.",1
"An employee was taking roils out of an oven when she lost her balance and fell to the floor, breaking her hip.",1
"An employee was painting a 4"" pipe when he tried to clean the residual paint off the paint mixer drill bit attachment. He was using a nylon sack to wipe the excess paint off when the drill was inadvertently activated. His left pinky finger became wrapped in the nylon sack material, resulting in a finger amputation.",1
"An employee was riding the leading-end platform of a railcar as it was entering a road crossing when a semi-truck and trailer operated by a third-party trucking company entered the crossing just in front of the train. The train was unable to stop in time to avoid a collision and the employee was struck by the truck, which fractured both of his legs above the ankle.",1
An employee was using a powered industrial truck to load a pallet into a trailer when the employee's leg was caught and fractured between the truck and a pillar. The employee was hospitalized.,1
"An employee slipped on a boot dryer on the floor. She struck a credenza, suffering knee and tibia injuries.",1
"An employee was stepping off a porch when the employee fell to the ground, tearing the quadriceps in both knees. The employee was hospitalized and had surgery.",1
An employee was installing a roof on a steel building when he lost his balance and fell approximately 30 feet to the ground. He was hospitalized with an injury to his arm and leg. Fall protection was unhooked at the time of the incident.,1
"An employee was installing guttering from an aerial lift when the employee contacted a power transmission line, suffering electrical burns to the face, hands, and body.",1
"An employee fell off a mobile nightstand, suffering a broken hip.",1
"An employee tripped over a bucket and fell onto a concrete patio, suffering a broken hip.",1
"An employee was moving a lettuce slicer when her left thumb was caught between the slicer's blade and guard. She bumped the handle and the blade cut her left thumb, resulting in a thumb amputation.",0
"An employee was operating a scissor lift when material fell and pushed the lift, causing it to top over and fall with the employee inside. The employee suffered a fractured right wrist and lacerations.",1
"An employee was on the roof of a residential home. He was in the process of removing shingles from a pallet on an elevated forklift when the pallet broke, causing the employee to fall approximately 9 feet to the ground. He broke his right foot and ankle.",1
"An employee was in a scissor lift repairing an oven. A pusher struck the scissor lift. The employee sustained extensive facial and orbital fractures, a left scapula fracture, a T-12 compression fracture, a C-1 fracture, multiple fractured ribs on the left side, a chest wall laceration, upper lip laceration, and a laceration to the nasal tip.",1
An employee was moving a bagging machine when it slid off the edge of a mobile cart and crushed the employee's left thumb.,1
An employee was picking up a tool bag when a venomous snake that was under the tool bag bit the employee's left index finger.,1
An employee was cleaning the fuzzy seed location when the dust caused an asthma attack.,1
Two maintenance employees were trying to clear a clogged pipe using a small piece of metal. One of the employees was holding down the manual button on a solenoid so the gate would stay open. The employee holding the button let go of the button and the gate closed on the other employee's finger. He suffered a right middle fingertip amputation.,0
"An employee was in a receiving aisle doing merchandising work. At the same time, a forklift two aisles over was moving something when the forklift struck an item. The item fell onto a safe that was double stacked on a pallet. The safe then fell onto the employee. The employee was hospitalized with two fractured vertebrae.",1
"An employee was going to sand blast when the high-pressure sanding unit began to roll. He was trying to stop it when his right index finger was caught between the lid and the lip of the unit, resulting in a fingertip amputation.",0
"An employee was struck by an ATV while crossing the road, suffering a hairline fracture to the skull and a fractured tibia.",1
"An employee was operating a band saw when the employee's hand slipped and contacted the blade, resulting in a possible right index finger amputation.",0
An employee was building a load for a trailer. One of the I-beams being prepared was caught in the beam hooks and rolled onto the employee's right leg. His leg was broken right above the ankle.,1
"An employee was changing a roll of paper on a rack with a 10- to 12-foot bar. The bar's pin was removed on one end. When the employee pulled up on the end of the bar, it came loose, causing the opposite end of the bar to fall. This then caused the entire bar to fall, and the employee's left fourth finger was caught between the bar and the rack, amputating the fingertip.",0
"An employee was rolling cut pipe from a conveyor when the employee's hand was caught between two pipes, resulting in a pinky fingernail amputation.",0
An employee was clearing a bone from the jaw separating machine when their fingertip was pinched in the machine. The employee sustained an avulsion to the left index finger that required amputation of the fingertip.,0
"An employee was assembling a pallet with an air gun. When he fired a nail into the pallet, debris entered his eye, requiring hospitalization and surgery. Safety glasses were not worn at the time of the incident.",1
"An employee was winterizing a gas compressor when a flash fire occurred. He received burns to his face, neck, and hands.",1
"On October 28, 2019, an employee was in an auto salvage yard when a cottonmouth snake fell from a car's bumper area. It bit the employee's right hand, and he was hospitalized.",1
"An employee fell to the hard surface in a room, suffering a brain bleed/skull fracture.",1
An employee was loading a feed truck compartment when the wind blew the lid closed on his left index finger.,1
An employee was bitten by an unknown insect and hospitalized.,1
"At about 10:00 a.m. on October 28, 2019, an employee was lowering the landing gear of a log trailer when the ""swing"" landing gear beam crushed his right middle and ring fingers.",1
Two employees were arguing. The injured employee attacked the second employee with a shovel. The second employee used a garden rake to defend himself and broke the injured employee's arm.,1
"An employee was working from a one-person pod lift, installing network cable in a loading dock area. An overhead door struck the lift while being opened, causing the lift to tip over and the employee to fall to the floor. The employee suffered trauma to the back, shoulder, arm, and hand.",1
"An employee was cleaning debris from glue rollers when the employee's right thumb and index finger were caught between two rotating glue application rollers. As a result, the employee suffered a partial amputation to the right thumb and fracture to the right index finger.",0
"An employee was operating a powered lift truck when his left foot was crushed between a bollard and the lift truck, requiring hospitalization.",1
An employee was cutting tortilla strips when the knife slipped and amputated a fingertip.,0
"An employee was trying to remove a bad book from a conveyor when the employee tripped and fell forward, contacting the floor. The employee suffered abrasions and bruising on the knees, a cut on the lower lip, and a concussion.",1
An employee suffered an eye injury while pouring a zinc oxide product into a bucket.,1
"An employee was on an orchard ladder pruning trees using a pole pruner. The spring component of the pruner caught on a limb. When the employee attempted to move the pole to make another cut, the pole pulled him off balance. The employee fell 10 feet from the ladder to the ground, landing on his right foot. He sustained a fracture to the right heel.",1
"An employee was climbing a step ladder when she lost her balance and fell to the floor, suffering a compression fracture of the L1 vertebra.",1
An employee was scanning a cotton bale when a forklift hit his right ankle. He was hospitalized.,1
"An employee was trying to open the door to a semi trailer. The strap broke and the employee fell backward off the trailer to the ground, suffering a broken left elbow.",1
"An employee was inspecting a piece of equipment that was making noise when the employee's glove was caught between the equipment's chain and sprocket. His finger was pulled into the spinning chain and sprocket, resulting in a right middle fingertip amputation.",0
An employee was bitten by a venomous snake while installing dewatering materials.,1
"An employee was working in a two-person crew to address a steam leak from a flange. A wooden plug was placed into the flange to reduce and mitigate the leak in preparation for the job. The plug dislodged, and the resulting burst of steam burned the employee's right hand, leg, and face. The employee was hospitalized.",1
"An employee was trying to get into a vehicle that was on a slow moving conveyor in order to move the vehicle to another conveyor for inspection. A second employee was already in the vehicle. When the second employee started driving the vehicle, the first employee lost his balance and fell to the floor, fracturing his hip.",1
"An employee fell from a ladder to the ground, suffering head trauma, broken ribs, and a broken leg.",1
"An employee was handling two industrial magnets. The magnets attracted each other while in the worker's hands, came together, and amputated his left thumb tip.",0
An employee tripped over the base of a fence post and fell. The employee was hospitalized with a possible dislocated elbow.,1
"On 10/29, an employee was stocking books on shelves when she slipped and fell to the floor, fracturing her elbows and nose. She was hospitalized and had surgery.",1
An employee was spooling wire coming off a wire draw machine when the end of a piece of fence wire struck the employee's eye. The employee suffered an eye injury requiring stitches. Safety glasses were not worn at the time of the incident.,1
"An employee was inspecting a trailer. While its door was being closed, the employee's left thumb was caught between the trailer and the door. The tip was amputated.",0
An employee was attempting to remove a wedge that was under tension in the weld of a bucket when the wedge flew out and struck the employee in the face. He suffered a fractured orbital bone.,1
An employee suffered a leg injury when a rifle accidentally discharged while adjusting the scope mount and bore sight.,1
"An employee was attempting to light the pilot light on a heater treater when a faulty valve allowed gas to escape and ignite, causing second degree burns to the employee's face.",1
"An employee was standing on the fifth floor supervising workers. The employee took a step back and fell through a hole approximately 14 feet to the fourth floor. The employee sustained a laceration to the back of the head, and fractures to the spine, ribs, and jaw.",1
"An employee was operating a press brake. To get the angle correct on a piece of sheet metal, a second piece had been added. When the machine was activated, the employee's right index finger was caught between the two pieces amputating the fingertip.",0
"On 10/29/2019, an employee was walking across the parking lot when he slipped and fell to the ground, hitting his head.",1
"An employee was walking to his vehicle when he slipped on ice and fell to the ground, breaking his left tibia and fibula. He was hospitalized.",1
An employee was attempting to catch a bottle that was falling off of a cart when she lost her balance and fell. She was hospitalized with a right hip fracture.,1
"An employee was unloading a shipping container. A portable loading ramp was being moved into place when it fell off the forklift and landed on the employee's foot. The steel cap of his steel-toed boots was crushed against his toes, resulting in medical amputation of four toes.",1
"An employee was climbing a 28-foot extension ladder to attach an aerial service wire to a communications pole when the pole snapped due to wood rot. The employee fell 15 feet to the ground and broke his left arm, requiring hospitalization.",1
"An employee attempted to remove a board that was jammed in the entrance of the gang saw. On the third attempt to remove the board, the employee's arm contacted the planer head of the gang saw resulting in amputation of the right arm below the elbow.",0
"An employee slipped on ice/snow and fell in the parking lot while accessing a work truck, suffering a back/rib injury.",1
"An employee was getting a saw out of a toolbox when his right middle finger was pinched, resulting in a fingertip amputation.",0
"An employee was preparing a mold to be blasted. While maneuvering the molding into place, the employee's right ring finger was pinched by the mold, causing an amputation to his fingertip without bone loss.",1
A temporary employee had his right foot on the brake of a hand truck and was in the process of leaning the hand truck back toward himself when one of the boxes on the hand truck shifted. The result of this action altered the distribution of the load and exerted pressure onto the employee's right leg. He sustained fractures to his right tibia and fibula.,1
"An employee was entering a hot rinse water tank when he slipped and fell into the hot water up to his waist, suffering burns.",1
An employee was cutting pipe with a construction saw when the saw kicked back and lacerated the employee's throat.,1
"An employee was standing in the back of a truck, setting out traffic cones on the edge of a road. The truck moved forward and the employee fell from the truck, landing on his back. An arrow-board in tow ran over his right leg, breaking it.",1
"An employee was attempting to unclog a jammed vacuum unit when his right hand entered the energized unit. His right index finger was then caught between the vacuum's airlock and flange, resulting in a partial finger amputation.",0
"An employee was assisting a patient in a parking lot and contacted a foreign substance, possibly Fentanyl, that was on the patient. The employee started having cardiac issues and was hospitalized.",1
"An electrician was climbing down a ladder when she fell, landing on the ground below and breaking her right ankle.",1
"An employee was removing trim from a 6-foot step ladder when he lost his balance and fell off the ladder, fracturing his leg and ankle.",1
"An employee was on a scissor lift 20 feet high, removing a damaged aisle upright. The scissor lift fell over with the employee inside, and the employee suffered a broken ankle.",1
"An employee climbed to the 6-foot level of a ladder on a deck to remove screws and trim boards when the ladder slipped on the deck. He fell to the side and then jumped to the floor off the deck, landing on his feet before collapsing. He fractured his right tibia and injured his left heel, requiring surgery.",1
"An employee was pouring a hot load of molten steel into a mold when a hot piece of metal splashed and went inside his boot, burning his foot. He was hospitalized.",1
"An employee stepped off a stair step, twisted his leg, fell to the ground, and broke his leg.",1
An employee was manually moving a rack weighing 500-800 pounds when it tipped over on top of the employee. The employee sustained fractures to the upper left leg and ankle.,1
"On October 30, 2019, at approximately 1:40 a.m., an employee was placing steel pallet forms used to create foam insulation panels into a press. The pallets are guided into the press by rollers located underneath the pallets. As the employee was moving a pallet form into the press, the pallet form became stuck on the guide rollers. The employee was attempting to reach up to free the pallet when the roller drive mechanism engaged, causing the employee's right hand to be caught between the pallet and a vertical steel press support column. The employee suffered a fracture of the 5th metacarpal in the right hand (pinky finger between knuckle and wrist joint), requiring hospitalization and surgery.",1
An employee was disassembling a shelf when it fell and cut off part of the employee's little finger.,1
"While inspecting lumber, an employee was struck by a stack of lumber that was being conveyed. He sustained a laceration to his leg resulting in hospitalization.",1
Employees were attempting to attach forks to a backhoe. The injured employee was holding the forks when he fell off the casing trailer. The forks landed on his chest and he sustained broken ribs.,1
"An employee was going to use a water hose to remove chicken debris from the floor inside the further processing oven room. As the water valve was turned to the on position, the pressure from the hose caused it to slip out of the employee's hands and the end of the hose made contact with the left eye of another employee standing nearby. The eye injury required surgery.",1
An employee fell approximately 12 feet to the ground while installing a single-wide mobile home roof and suffered fractured vertebrae.,1
"An employee was removing a coaster car from the tracks using a forklift, when their right hand was caught between the wheels and the axel. The employee sustained amputation of the right pinky fingertip.",0
"A maintenance employee was fixing a folding rail that was stuck. When the scissor railing lowered, the employee's finger was caught in a pinch point of the folding section. The employee's left pinky fingertip was amputated.",0
An employee was assembling a trench box and sliding a side panel into a corner post when the steel panel amputated the employee's right ring fingertip to the first knuckle.,0
A maintenance employee was conducting a leak test when their right hand was caught on the die resulting in amputation of the thumb tip.,1
"An employee was using a battery-powered handheld circular saw to cut wood. He was adjusting his grip on a piece of wood when his hand came in contact with the moving blade, resulting in a left pinky finger amputation.",1
"An employee was working in an excavation, connecting horizontal boring drill attachments. The boring machine kicks out soil while it is operating underground. This soil was being scooped up by an excavator when the excavator's bucket bumped the wall of the excavation, causing a wall of soil to fall onto the employee. The employee sustained a fractured ankle and pelvis.",1
"Two employees were pulling a manure hose through a culvert using a tractor in order to field-spread manure. The injured employee's leg became entangled in the manure hose, and the tractor dragged him. The injured employee sustained a partial leg amputation (above the knee).",0
"An employee was walking to her car when she slipped on black ice in the parking lot and fell to the ground, breaking her left ankle.",1
"An employee was trimming branches from a tree when they slipped from a branch. The fall protection system engaged, causing the employee to swing and hit the trunk of the tree. The employee was hospitalized with a lower back injury.",1
"An employee was securing material for a delivery when the employee fell approximately 4 feet from a flatbed truck to the ground. The employee suffered a fractured skull, broken ribs, and a bruised lung.",1
"Two employees were putting pallets and wood in a roll-off dumpster. After completion, some pieces were sticking out above the fill line. The employees climbed the dumpster to rearrange the wood to fit within the fill line. The injured employee fell from the dumpster to the ground below, sustaining a broken hip that required surgery.",1
"An employee was observing line machinery operations when he attempted to check an air cylinder actuator with his left hand. The actuator suddenly actuated, and his left ring finger became lodged, resulting in a finger amputation.",1
An employee was walking when a forklift reversed and ran over the employee's left foot. The employee's foot was crushed and had to be amputated.,1
An employee was using a drill press to drill a hole in a piece of metal when the piece began to spin and amputated the employee's fingertip.,1
An employee was attempting to jump a cable from a temporary meter when an arc flash occurred. The employee received electrical burns to the arm and face.,1
"An employee was operating a walkie/rider electric jack when he turned the electric jack to the left and his left foot hit a concrete pole. His foot became caught between the pole and the electric jack, resulting in a swollen left foot area with two fractures and a cut. His foot was off the forklift platform at the time of the incident.",1
"An employee was working as an assistant on the extrusion line, pulling plastic out from the machine. The roller was dropped on the injured employee's right hand, crushing two fingers between the machine's rollers. The employee sustained a partial amputation of the ring and middle fingers.",0
"An employee was operating a press machine when the employee's left middle and ring fingers were caught in the machine, resulting in the amputation of the middle and ring fingertips.",1
"An employee was walking in the locker room when hardware in his prosthetic leg failed, causing him to fall to the floor. The employee was hospitalized with possible broken ribs.",1
"On October 30, 2019, an employee was preparing an area to throw bundles of mail underneath the automated parcel bundle sorter. He got on a powered operated pallet jack to move it.  While he was moving the pallet jack, the control handle unexpectedly came up, causing the pallet jack to come to a quick stop. He fell off of the pallet jack and landed on his back on the concrete floor. He was hospitalized with a fractured back.",1
"An employee was dislodging a piece of lumber from a conveyor when another piece of lumber hit the piece he was attempting to remove, causing his left pinky finger to be caught between the lumber and a piece of steel. As a result, his left pinky finger was amputated.",0
An employee was cleaning a piece of lab equipment and amputated his right index fingertip.,0
"An employee was attempting to remove a rock that had jammed a mechanical gate on a batch plant hopper and conveyor. When the rock became free, the gate snapped shut, pinching the employee's hand and fingers between the gate and the stop point of the gate. Four fingers were amputated at the second joint of the knuckles.",1
An employee was cutting material on a block using a chop saw when the saw kicked back and amputated his left index fingertip.,0
"While unloading a flatbed truck, an employee slipped off the truck and fell approximately 4.5 feet to the ground, suffering a broken femur.",1
"An employee was retrieving his fallen hard hat from under the mold line when the line indexed, impacting the employee's head. The employee was hospitalized for a skull fracture.",1
An employee was at the range when a disc in his neck broke into three pieces and one of the pieces went through a ligament.,1
An employee was standing on the incline of a grinder. The employee fell 3 feet off the grinder onto the floor breaking two ribs and puncturing a lung.,1
An employee was going to lift steel products using a chain sling and an overhead bridge crane. The employee's left thumb was pinched between two chain pieces when the crane started lifting the product. He sustained a laceration and fracture of the left thumb.,1
"An employee was operating a standup forklift to load produce at dock door #4. En route to the dock office, the forklift backed into the concrete dock office wall and the driver's ankle was fractured.",1
"An employee was felling a tree when a tree or branch struck the employee, causing fractures to the neck and cheekbone.",1
"An employee was throwing trash in a truck when his finger became caught in a pinch point between the cable and the truck, resulting in a fingertip amputation.",0
An employee was operating a four-wheeler to take soil samples when it hit a rock. The four-wheeler rolled over onto the employee's left leg fracturing the fibula and tibia.,1
An employee was lifting material with a crane when a skid of metal fell and landed on him. He suffered a leg laceration and contusions to the abdomen and pelvis.,1
An employee broke his leg when a wall partition fell on his leg.,1
"An employee was sliding a box across the floor when the box struck a raised floor-mounted electrical outlet, causing the employee to lose her balance and fall head-first into merchandise shelving. She sustained a head injury.",1
An employee was cradling a 20-pound spool of synthetic yarn that had become unraveled. The employee was attempting to find the end of the ball of yarn and had been making loops with their left hand. The employee dropped the spool and it fell to the ground. As a result one of the loops of yarn clinched tight on the end of the employee's left little finger pad and sliced/tore the skin away.,1
"An employee was walking on a paved road to a training class at a training facility. When he reached the crosswalk, he slipped and fell to the ground. He suffered a broken left leg and was hospitalized.",1
An employee offloading boxes from a truck suffered chest pains and was hospitalized.,1
"An employee fell approximately 9 feet from a ladder to the ground while attempting to reach an alarm that was going off on top of a machine. The employee suffered a broken left arm and fractured ribs, requiring hospitalization.",1
An employee seated in a chair fell out of the chair and injured their back.,1
"An employee was sliding a fork extension onto forklift forks when the fork extension slipped from his grip and his left hand was caught between the fork extension and the forklift forks, resulting in an amputation to the left middle digit.",0
An employee on a ladder was nailing siding using a nail gun. While securing the nail gun it missed his pouch causing a nail to shoot and penetrate his thigh.,1
An employee was punched in the face by a patient. The employee was hospitalized with a fractured jaw.,1
"An employee was cleaning and emptying trash cans when the employee tripped over a guest's foot and fell onto a display case. The employee's head/lip area struck the case, and the employee suffered head, face, and chest injuries.",1
An employee was taking apart a countertop. The countertop fell and caused an amputation to the employee's finger.,0
An employee's right hand was caught and de-gloved between two rollers on a rubber mill.,1
"An employee was cleaning mud off his boots with a 3,500 psi pressure washer when he lost control of the pressure washer and was struck on the right calf with pressurized washer spray. He suffered a puncture wound to the right calf and was hospitalized.",1
"An employee was working inside a barricaded area on a road replacing a broken electrical pole. A car broke through the barricade and contacted a fiber optic cable that was on the ground. The cable then struck the employee, throwing him into the road and dragging him approximately 27 feet. The employee sustained injury to the head and face.",1
"An employee was placing cribbing underneath a part when the part slipped, catching his finger between the material and a machine. The employee's right index fingertip was amputated.",0
An employee was installing a drive shaft when it fell and struck his right forearm.,1
An employee was climbing a portable ladder and fell to the floor below resulting in two fractured vertebrae.,1
"An employee was rehanging a line on a pole approximately 18 feet high. During high winds, a nearby tree broke and fell onto the feeder cable causing the top of the pole to snap below the transformer. The employee did not fall from the pole, but was struck by the pole or the transformer. The employee was hospitalized.",1
"An employee was working from home constructing an A-frame easel to be used at the store. He was operating a table saw, turned the saw off and reached for the cut piece of wood. The still moving blade severely lacerated his left index and middle fingers. He was hospitalized.",1
An employee was injured by an arc flash while working on a live electrical panel. The employee received burns to the face and hands.,1
An employee was repairing a stacking machine when the machine belt suddenly started and amputated the tip of his thumb.,0
"An employee was walking on top of a fuel tanker preparing to fill the truck. He stepped over an opening, lost his footing, and fell to the ground sustaining a bruised left leg and lacerations to the nose and forehead.",1
"Two employees were unboxing stadium chairs. Employee 1 picked up a paddle-lock and hit the injured employee in the head with it. The injured employee was knocked out, began having seizures, and was hospitalized with severe head trauma.",1
An employee was getting ready to change out a tool die on the press. The lifting device shifted and dropped; the top shut on the employee's hand. The employee sustained a fractured right index finger and the right ring finger was amputated.,0
"On 10/31/2019, at approximately 10:00 AM, an employee was on his hands and knees balanced on trusses while sheeting a roof. He lost balance and fell approximately 14 feet to the concrete below, sustaining a neck injury.",1
An employee was collecting solid waste material at residences. The employee was riding on the back of the truck. It was raining and the vehicle was wet. The employee fell from the back of the truck and was hospitalized with head injuries.,1
"An employee fell 43 inches from a crane platform while removing a pin from the boom. The pin weighs about 50 lbs. and the employee lost his balance and fell to the concrete floor, hitting his head. He suffered two fractured vertebrae in the back and one fractured vertebra in the neck.",1
An employee was cutting a section of a sidewalk using a saw when the saw kick backed and lacerated the top of his left foot.,1
"An employee was hanging ceiling grids while wearing adjustable stilts. A screw came out of the stilts and the stilts collapsed, causing the employee to fall and break a leg.",1
"An employee was working on an automatic drill apparatus. A tool was left on top of the machine, and the vibration from the machine started to move the tool. The employee was attempting to grab the tool when the machine cycled again. The employee's left arm was caught in the machine, resulting in a left arm fracture and severe lacerations.",1
An employee was operating a brake press when her finger got caught between the two dies resulting in amputation of the left index finger.,1
"An employee was spraying an area with a water hose when she slipped and fell, injuring her knee.",1
An employee was tapping a chain when his index and middle fingers were caught in the chain and sprocket. He suffered an amputation to the index and middle finger on the left hand.,1
An employee was using a multi-meter to troubleshoot an electrical issue on a 26-kv primary switch. An arc flash occurred and the employee sustained electrical burns to the hands and face.,1
"An employee was attempting to tack weld and repair a tubular steel livestock gate. The gate was in a bind due to a broken component and was positioned in such a way that a gap was present between the broken component and anchoring rail. As the employee placed the left hand on the anchoring rail, it dropped, pinching the soft tissue of the employee's left index finger between the component and anchor. As the employee pulled the hand back, the employee's left index finger was amputated (without bone loss).",0
"An employee was assembling a 6"" bend for a manhole vent when his finger was caught in between the bolts and the hood, fracturing his middle finger.",1
"An employee was on a truck's platform, unhooking air lines from the trailer. The employee fell off the platform to the asphalt ground and suffered a broken right femur.",1
"An employee was operating an electric pallet jack, taking it to be charged. When the employee dismounted the pallet jack, his right foot became caught under the pallet jack, fracturing his right ankle. The employee was hospitalized.",1
An employee was injured while shoveling soil inside a trench when the side collapsed and struck his right leg. The employee suffered a lower leg fracture.,1
An employee jumped down into an excavation that was 9 feet deep and then the walls of the excavation caved-in on him. The employee sustained broken ribs and a crushed collarbone and jaw.,1
"An employee was operating a sweeper truck and hit a guardrail, suffering a deep laceration above his right ankle.",1
"An employee was working with a ground man to remove a storm-damaged red oak tree that had fallen on a primary power line and secondary communication lines. The tree was being supported by two branches near ground level. When one branch was cut, the weight shifted onto the other branch, which failed. This caused the tree to roll and strike the employee in the right leg, fracturing his femur.",1
"On November 1, 2019, an employee was unjamming material from the caking roller using a wrench. The wrench was pulled into the caking roller and the employee's fingers were crushed by the wrench and the ingoing rollers. The employee sustained the amputation of their left pinky fingertip and a fractured middle finger.",0
An employee was taking a picture from the back of an empty trailer when she was struck from behind by a forward moving tractor. The employee sustained a contusion to the abdomen.,1
"An employee slipped on ice while leaving a vehicle in the company parking lot. The employee fell to the pavement, suffering an injured back and neck, and was hospitalized.",1
An employee was patrolling a parking lot when she was shot once in the abdomen and once in the hip.,1
"An employee had delivered housekeeping equipment to another building. Upon returning from the other part of the facility, the employee slipped on ice that was on the ground in front of the entrance door. The employee sustained a broken leg requiring hospitalization and surgery.",1
"An employee was operating a press machine. The employee was attempting to pull a pin out of the master bushing while the chain was moving forward when the employee's left hand was caught between the left/front pusher head and the pin being pushed out. As a result, the employee sustained an amputation to the left pinky finger.",0
"Employees were working on a ride-on core aerator in a garage. The core aerator was raised up on a forklift so the employees could examine the belt. As the injured employee was examining the belt, the aerator was turned back on and the injured employee sustained amputation of the left middle fingertip.",0
"An employee slipped/tripped on ice on the frozen ground, breaking the left femur.",1
"An employee had picked up an odd-shaped piece of decking material that weighed approximately 44 lbs. and was moving it to a place on the deck when he slipped, lost his balance, and fell onto the deck. As he fell, he let go of the decking material and it struck his calf, breaking his left tibia and fibula.",1
An employee's legs were pinned between a concrete piling and the tire of his truck while he was trying to remove a piece of wood from the cement piling. He suffered a torn left ACL.,1
"An employee was helping a machine operator load a personnel bucket onto a trailer when the employee was struck by the boom of a rear-easement backyard digger-derrick machine. The employee suffered fractures to the ribs, hips, and right femur.",1
An employee operating a double pallet jack in the freezer was struck by a forklift and was hospitalized with a broken ankle.,1
A maintenance employee was cleaning a forklift engine with a pressure washer when the nozzle tip came off and steam released. He suffered a laceration and burns to his hand.,1
"An employee tripped and fell down while descending a staircase inside the facility. The employee suffered a fractured left wrist, contusion on the forehead, and potential concussion.",1
"An employee had been inspecting a roof line from a ladder. As the employee climbed down the ladder, the ladder's base gave out and the employee fell onto a porch roof and deck. The employee suffered a compression fracture to a back vertebra.",1
An employee was unloading crates of apples that weighed approximately 20 to 30 pounds when he fell and hit his head against the base of a shopping cart. He suffered a head laceration and two fractured vertebrae.,1
An employee was walking around a truck that had a form extending beyond the truck's body when she lost her footing and fell onto the asphalt surface. She broke her right femur and required hospitalization for surgery.,1
"On October 27, 2019, at about 7:45 a.m., an employee was trying to get a power washer to turn over. The employee was testing the battery and solenoid when the motor moved and caught the employee's left ring finger in the belt, resulting in an amputation to the finger.",0
"On November 1, 2019, an employee was hanging birthday decorations from a sales countertop. She went to step onto an A-frame ladder and slipped, falling to the floor on her knees and elbow. She was hospitalized with sprained knees and a dislocated elbow.",1
"A temporary employee was hooking up a cargo load in the hull of a boat when the straps holding the pipes broke, allowing the pipes to fall on top of him and strike his legs. He suffered a broken left leg and right leg laceration.",1
An employee was lifting a pot of water to empty at the steam table when she felt something pop in her back. She fell onto the steam table and possibly down to the floor as well.,1
"An employee was attempting to apprehend a shoplifter when the shoplifter pushed the employee. The employee fell and struck their head on the ground, suffering swelling of the brain and requiring hospitalization.",1
"An employee was working the cash register at the front of the store. A masked person entered the store and demanded money. As the employee turned to open the cash register, the person shot the employee twice in the stomach.",1
"When a flight attendant sat in the forward cabin jump-seat, his left ring finger was caught in the seat's folding mechanism. The flight attendant sustained a fingertip amputation and a broken finger.",0
An employee was straightening boards on a chain conveyor when his glove was caught by the conveyor's chain. The employee's left ring fingertip was amputated.,0
"An employee was closing a dock door when he lost his footing as he was bringing the door down, causing it to land on and break his left arm.",1
An employee was kneeling down to look under an welder machine to see if he could find a bracket that had broken off. The employee lost his balance and his left hand slipped off the frame of the machine. His left index finger was caught between a table transfer cylinder and a metal stop and the fingertip was amputated.,0
"An employee was working a pipeline tie-in operation, aligning a pipeline section with an existing pipeline. The nylon sling attached to the track hoe that was holding the pipeline section had too much slack, and the pipeline fell about 2 feet (while still in the sling) and struck the employee. The employee suffered a hairline hip fracture.",1
An employee was operating a yard horse and was exiting the cab onto the platform of the yard horse when their safety boot got stuck on the platform grating causing the employee to fall approximately 42 inches from the platform onto the pavement. The employee was hospitalized with a fractured right elbow and vertigo.,1
"An employee was mounting a tire on a tire changing machine. He was attempting to clean off debris from the automated duck head when his right index fingertip was pinched between the duck head and the wheel of the tire, resulting in a partial finger amputation. The duck head was in motion at the time of the incident.",0
"An employee was preparing to work on the brakes of an overhead crane when the brake shoes were removed on the static brake and the crane moved. The employee was caught between the crane trolley and the beam, suffering a spleen injury that required surgery.",1
The injured employee was steadying an 8-inch pipe that was positioned on a pipe stand so that another employee could grind a tack weld on the pipe. The pipe slipped off the stand and crushed the injured employee's left arm against the stand. The injured employee sustained a broken ulna and radius and required surgery.,1
"On November 01, 2019, an employee was cleaning a mandrel (metal cylinder which holds the can) of a can printing decorating machine when the printer jogged, causing his right hand to be caught between machine's mandrel and blanket wheel (transfers the image onto the can). The employee suffered a laceration and fracture to his right hand, requiring hospitalization.",1
"An employee was working on the top floor of the mill attempting to unplug a cyclone, when he lost balance and fell into the open hatch of the auger. The auger rotated and amputated the employee's lower left leg. At the hospital, the employee's leg above the knee was surgically amputated.",1
An employee was setting dunnage for crane pads when the employee's finger became stuck between the dunnage and the crane pad. The employee's left index finger was de-gloved and had to be medically amputated.,0
An employee was acting as a spotter for a moving aerial work platform when one of the platform's wheels struck and fractured the employee's left leg.,1
An employee was inspecting fire extinguishers on a fourth floor roof when he fell from the roof.,1
"An employee was sealing a trailer before it departed. The trailer pulled away from the loading dock and the employee fell approximately 4 feet from the loading dock. The employee sustained a head contusion, fractured ribs, and a punctured lung.",1
"An employee had just hooked up to a bulk chemical trailer and was performing a pre-trip inspection. Caustic soda ash blew from a rail car inside the plant and the employee sustained chemical burns to the eyes, face, throat, and lungs.",1
An employee was unclogging a pneumatic paint gun when bronze paint was discharged into a finger on the employee's right hand. The employee was hospitalized.,1
"An employee was standing on the elevated forks of a forklift to reach racking in a warehouse. As he was being lowered down from the racking, the forklift shifted, causing him to lose his balance and fall approximately 5 feet to the ground. He suffered closed head trauma.",1
"An employee was working on or around 13,800-volt electrical equipment at a substation. An arc flash occurred and the employee sustained second and third degree burns to the face and neck.",1
The injured employee was helping a co-worker near the boiler when he noticed a pressure valve was providing a false reading. He tapped on the fluttering boiler gauge; the gauge dislodged and sprayed hot water (180-190 degrees F) onto his left forearm resulting in a second degree burn.,1
An employee was pulling a line of baggage carts when he pulled a muscle in his back.,1
An employee was opening a sliding metal gate when the gate came off its track and struck the employee on the left shoulder and thigh. The employee sustained a ligament tear in the thigh.,1
"An employee was operating a flow wrapper, pushing film through it, when his hand contacted the flow wrapper blade and amputated his right index finger.",0
"An employee was trying to put a muzzle brake in a howitzer. His finger entered a slot of the muzzle gun, which weighed 144 pounds, to align it.  When he turned the gun, his left index finger was caught in the slot, resulting in a fingertip amputation.",0
"An employee was standing next to a trackhoe looking at pipe when the bucket coupler released. The trackhoe's bucket struck the employee in the back and the bucket's teeth pierced the employee's side. The employee sustained injuries to the spine, ribs, spleen, and kidney.",1
"An employee was removing rigging to a piece of equipment that arrived by flatbed truck when the truck rolled backwards, struck the employee's left leg, and pinned it against a crane that was waiting to lift equipment. The employee suffered a broken femur, fractured tibia, and fractured patella.",1
"An employee was manually tying a cable on an automatic cut line that was malfunctioning. When the machine unjammed, it began operating while the employee's hand was in a pinch point area. The employee suffered a laceration from the middle of the middle and ring fingers down to the wrist on his left arm and was hospitalized.",1
"An employee was loading batteries onto a pallet when he tripped on a battery on the ground and landed on his left hip, breaking it.",1
"An employee was finished performing duties on the warehouse floor. While reaching down to grab his laptop bag, he had positioned his hand on a fusion table. A nearby forklift carrying a PVC pipe was rocked; the pipe went to the back of the forks and the edge of the table. The employee was caught and sustained a revision amputation of the left pinky finger.",1
An employee was in the office shutting down for the day. The employee impacted the back of their head on an unknown object and was hospitalized with a head injury.,1
"An employee was exiting a truck when he lost his footing while descending the cab stairs. He fell to the ground and injured his left elbow, requiring hospitalization.",1
An employee was cleaning needles used to inject an animal antibiotic into cattle when the needle punctured his left thumb.,1
"An employee was walking into the break room when the employee slipped on the wet floor and sprained a knee, requiring hospitalization and surgery.",1
"An employee was conducting drywall operations approximately 14 feet high on a scaffold when the employee fell to the ground, suffering a head injury.",1
"An employee was using a forklift to relocate a concrete pre-cast form when the hook chain sling became dislodged, causing the form to fall on the employee's right foot. He suffered fractures to his third and fourth toes.",1
"An employee was stepping off a ladder onto a roof. The ladder fell, causing the employee to fall approximately 20 feet to the ground below. The employee sustained fractures to the wrist, vertebrae, and heel.",1
"An employee was cleaning cotton from around the area of a cotton gin and had accessed the box area. While cleaning, he was struck by the box as it rotated, suffering a broken left arm (radius) and dislocated left elbow. He was hospitalized.",1
"An employee was loading, pushing, and pulling a cart with wooden doors that weighed approximately 20 pounds when he suffered an abdominal hernia, requiring hospitalization and surgery.",1
"An employee approached a folding machine that was folding metal plates. As he was putting on his personal protective equipment, one of his gloves fell into a gap between the work table and the edge of the machine. He was reaching into the gap for his gloves when the machine started. The positioning bar then moved, catching and lacerating his right forearm.",1
"An employee was carrying a box when she tripped over an object and fell to the floor, landing on and breaking her arm.",1
"An employee was removing a 55-gallon barrel from one pallet to another when the pallet broke. The employee lost balance and dropped the barrel, which struck the employee. The employee suffered bruising and was hospitalized.",1
"An employee was standing on a guardrail to cut the top off a form when he fell approximately 12 feet to the ground, breaking a vertebra in his neck.",1
"On November 4, 2019, an employee was working near the lime silo when the employee's eyes were exposed to powdered lime. The employee was hospitalized.",1
"While helping a customer, an employee heard the CO2 alarm go off and then called the fire department. The fire department came and did not find any problem, then turned off and reset the alarm. After the fire department left, the employee felt dizzy and was hospitalized for CO2 poisoning.",1
"An employee was checking the operating software on sizer machines. While walking between two machines, the employee fell and fractured the upper left arm.",1
"An employee was replacing a wire rope on an elevator. A pair of wire rope cutters were on the counterweight. When he started the elevator, the wire rope cutters fell on his foot, causing a fracture and laceration that required surgery.",1
"An employee fell approximately 18 to 20 feet down to the ground while descending from a 32-foot fiberglass extension ladder, fracturing the right ankle.",1
"An employee was moving bovine into a pen when an animal pushed her to the ground, causing her to fracture her right femur.",1
"An employee was installing siding from a 10-foot scaffold when he fell from the scaffold to the ground below. He suffered wrist and neck fractures, as well as an ear laceration.",1
An employee was attempting to remove excess onion skins from an onion slicing machine when the slicer blade amputated the employee's fingertip (no bone; only nail and flesh).,0
An employee was using a dolly to move boxes of bottle caps to the production area when he slipped on a pool of standing water. He fell to the concrete floor and was buried under the dolly and the boxes of bottle caps. He was hospitalized with a broken right pelvis and torn ligament in his right wrist.,1
"On 11/4/19, an employee was standing on the bottom row of parts racking approximately 1 foot above the floor to retrieve parts from the top row, which was approximately 5 feet above the floor. At approximately 12:17 p.m., the employee fell backwards from the bottom rack. Her head hit the floor, and the parts bin slid out of the rack and also struck her head. She was hospitalized with a head injury.",1
"An employee was using a two-shelf ladder cart to restock spices onto floor shelves. She was positioned on the second rung and reaching over to unload spices when the ladder began to roll. She lost balance, fell to the ground, and broke two bones in her right ankle.",1
An employee was cleaning the entry pinch roll on the cut-to-length line when their right hand was caught in the entry pinch roll. The employee's right thumb and index finger were partially amputated.,0
"Two employees were installing a heavy metal cabinet through an opening in the raised floor of a fire truck rear compartment. The injured employee had one hand through another opening in the rear compartment. While both employees were attempting to align the cabinet to a bolt hole, the cabinet pinched the injured employee's fingers, causing a partial amputation of the employee's right index fingertip.",0
"An employee was struck in the abdomen by a piece of metal while performing a die change. The employee suffered an abdominal laceration, requiring surgery and hospitalization.",1
"On November 5, 2019, an employee was adjusting the return flap on a conveyor system when the employee received an electric shock.",1
"An employee was checking out a trailer after he noticed the latch had been tampered with. When he opened the doors, he inhaled chemical fumes and became ill/nauseous.",1
"An employee was climbing down a 10-foot ladder. It slipped out from under him and he fell, landing on a 3-inch-diameter PVC pipe that was lying on the ground. He suffered six broken ribs and a punctured lung.",1
"On November 5, 2019, at 2:07 PM, an employee was walking between a tote container filled with empty hangers on the floor and a Z-rack. As she turned the corner, she tripped over the base of the Z-rack and her face struck the base of the Z-rack bar. She sustained a compound fracture to her left arm and a right wrist fracture, requiring hospitalization.",1
"An employee was driving an order picker forward between two racks when a rack guide rail broke, causing the vehicle to stop suddenly. The employee hit the end of the next piece of the guide rail and was thrown forward. His head hit the windscreen and he fell backwards. The employee sustained a concussion and a cut on the bridge of his nose.",1
"While operating a band saw to cut meat, an employee was struck by the blade resulting in a fingertip amputation.",0
"While working under or around a scaffold, an employee was struck in the chest by a 3-foot long, 65-pound S-spool that fell while it was being buffered with a wire wheel by an employee up on the 10-foot scaffold deck. The employee was hospitalized with chest bruising.",1
"An employee was standing on a ladder cleaning air vents when the employee fell from the ladder to the concrete ground, suffering a fractured skull.",1
"An employee was attempting to free a piece of carpet that was jammed on a cut table when the table blade contacted the employee's hand, resulting in the partial amputation of the employee's right index and middle fingers. The cut table was guarded at the time of the incident.",0
An employee was helping to tear down an A-frame hoist when the employee's thumb was amputated at the first knuckle.,1
"An employee was on a walkway installing mechanical equipment when he fell 3 feet to the ground on his left side, fracturing his collarbone, six ribs, and his pelvis.",1
"An employee was walking across the front end of the store when she slipped and fell to the floor, fracturing her right hip.",1
An employee was walking in the middle of the store when she tripped over raised granite that was part of the floor structure and injured her hip.,1
"An employee was cleaning the guard of a press machine with a rag when the rollers of the machine caught the corner of the rag and dragged the employee's right middle finger, resulting in a degloving injury from the distal interphalangeal joint to the tip of the finger. The employee's fingertip had to be surgically amputated.",0
"An employee was turning to grab a saw horse when he slipped and fell on the floor, landing on and fracturing his left hip.",1
Two employees were moving a five-drawer cabinet on a four-wheel dolly. One of the wheels got caught on a damaged part of the floor. The cabinet tipped over and injured an employee's lower back. The employee was hospitalized.,1
"An employee was working from the top platform of a portable stair tower. While reaching in the direction of the stairs, the employee fell approximately 5 feet to the ground below and sustained a broken ankle.",1
An employee was moving a drum roller in the yard when a mechanical vehicle hit the employee and broke his left leg.,1
An employee was rigging a 2.5-inch anchor safety shackler weighing 75 pounds when he suffered a herniated disc in his back.,1
"An employee was delivering steel beams to a residential job site. He pulled parallel to the curb and unstrapped his load. When he pulled a beam toward himself, the far end of the beam shifted and the beam tipped towards him and the beam pinned his left middle finger against the truck bed. He pulled his hand out from underneath the beam, and the beam fell to the ground. His left middle finger was amputated at the middle of the nail bed.",0
"An employee was changing the transfer paper roll on the back of a blanket press when her right arm became trapped under a large, heavy pin and pressed down and twisted on the conveyor belt. While waiting in the first aid area, the employee passed out, fell backward, and hit her head on the concrete floor. She was hospitalized with a right arm injury from the elbow down, right knuckle abrasions, and a head injury.",1
An employee was responding to an issue with a shape machine; a wheel was stuck in the upper punch retainer tooling. The wheel was under stored nitrogen energy and released from the tooling. The employee's right hand and index finger were caught between the wheel and the machine resulting in partial amputation of the right index finger.,0
"An employee was cutting sheet metal on a shearing machine when the employee's left hand was caught in the point of operation, amputating two fingers.",1
An employee was operating a machine that punches holes into canvas material when her right hand went under the guard and the machine operated. Her right middle fingertip and ring fingernail were amputated.,0
"An employee has helping to demobilize a crane. While the employee was putting the feet of the outriggers into storage, the crane began to pull the outriggers in. The employee's arm was caught between the crane and the outrigger. The employee sustained a broken upper right arm and muscle damage.",1
An employee fell to the ground while walking into work for the day. The employee was hospitalized with a dislocated knee.,1
An employee was loading a pipeline cleaning pig into a launcher when the third finger on their left hand was pinched between the pig and the launcher. The employee sustained a partial amputation of the finger near the distal joint.,0
"An employee was installing bottom bracing on framing to support a concrete pour. The employee used a battery operated circular saw to make a shallow cut into a wooden board. The employee sustained a cut to the left hand at the inside of the middle finger and down through the palm, which required hospitalization for tendon repair surgery.",1
"On November 05, 2019, at approximately 10:00 a.m., an employee was found unconscious on a reach truck after becoming caught between the reach truck and a pallet while trying to exit the vehicle. He suffered an abdominal injury and was hospitalized.",1
"An employee was riding a horse, corralling livestock, when the horse lost its footing and fell on the employee. The employee sustained a broken leg.",1
An employee was fixing lawn equipment. He tripped on the equipment and broke his right femur.,1
Employee was rounding a tree stump when he slipped on the roots and the soft ground. He suffered a broken leg bone.,1
"An employee was sitting on a forklift with his seatbelt on. The forklift he was operating was stuck in the yard, so another forklift had hooked a chain to his forklift and was attempting to pull it loose. The forklift then turned over on its side and the employee's foot was caught underneath it, fracturing the foot.",1
"An employee was cleaning out a choke with an air hose when the hose was caught by and pulled into a moving gear. The employee's hand was also pulled into the gear, suffering a cut and an avulsion injury.",1
"An employee was standing outside the dressing room when the employee lost footing and fell to the floor, fracturing the right hip and wrist.",1
"On November 5, 2019, a temporary employee was placing parts in a machine when it caught his right thumb. He suffered crushing injuries and an amputation of the thumb.",0
"An employee was reaching for a broom and dust pan that was under a work station with her leg/foot when her foot became caught in some computer wires. As she pulled her leg out from under the table, it became wound up on cables and she fell to the ground, breaking her hip.",1
"Two agents were conducting patrols using ATVs. The injured agent struck the other agent's ATV from behind and was ejected. The injured agent sustained six broken ribs, a fractured sternum and a torn lung.",1
"An employee was operating a drill machine when his glove was caught in the drill bit, resulting in a right pinky finger amputation.",1
"At about 1:00 p.m. on November 6, 2019, an employee was operating a cement mixer when it amputated the employee's fingertips.",0
An employee was moving a scrap cart away from the machine where he was stationed when the fifth digit on his left hand was caught between the cart and the machine and the fingertip was amputated.,0
"An employee slipped and fell while walking down stairs, landing on concrete and suffering a broken pelvis.",1
"An employee was setting a cast iron tub. The tub fell on the floor, landing on the employee's right index finger. The tip of the finger was ripped off.",0
An employee was exiting a work vehicle on the passenger side while taking a break. His foot got caught under the dashboard causing him to fall out of the truck and break his right arm.,1
An employee was in the bottom of a trench directing the excavator operator by giving him hand signals when the employee's arm was pinned between the excavator bucket and the trench box. The employee suffered possible soft tissue/nerve damage.,1
"An employee was cleaning near a roller system using a rag when the rag was caught in the rollers and pulled the employee into the roller system. The employee sustained a dislocated right shoulder, a broken right clavicle, a broken right arm, and broken ribs.",1
"An employee was removing rust from the interior of a 60-70 gallon diesel fuel tank using a portable electric tool. The flammable vapors ignited and a flash fire occurred inside the tank. The employee suffered burns to the left hand, arm and neck.",1
"An employee was attempting to clean a concrete pump when the pump mechanism caught his left middle and ring fingers, resulting in the partial amputation of both fingers.",0
An employee was repairing a damaged railing and fell 25 feet through the railing to the concrete floor below. The employee suffered multiple injuries including broken bones.,1
An employee missed a step while climbing down a ladder and fell approximately 3 feet onto a mat-covered dirt floor sustaining a broken right hip.,1
"An employee was driving a forklift down an access ramp when the forklift fell off the ramp and pinned the employee against the pavement and the overhead guard of the roll cage. The employee suffered leg, hip, rib, and back injuries.",1
An employee was trying to light the pilot on a buster at a tank battery when a  flash-back occurred which blew him back 15-20 feet. The employee sustained second degree burns on part of his face and hands and was hospitalized.,1
"An employee was operating an edge banding machine. While cleaning out the build up of glue, wood dust, and cutting debris, his left hand contacted the rotating blades resulting in amputation of the middle and ring fingers at the second knuckle and the index finger at the first knuckle.",0
"An employee was just getting ready to start work for the day. To get to the roof, the employee needed to climb up several flights of stairs and a ladder. After climbing the stairs and ladder, the employee felt dizzy. He sat down and then became unconscious. He was hospitalized with a heart attack.",1
An employee left a meeting at the job trailer and slipped and fell on ice while walking back to the job site. The employee hit his head and was hospitalized.,1
"An employee was unloading a window from a dolly when he lost his footing and the window fell on his foot, fracturing it.",1
"An employee was unloading a truck when the employee's left finger was caught between the tailgate and the chain, resulting in a fingertip amputation.",0
"An employee slipped and fell, suffering a broken leg. The employee was hospitalized.",1
"An employee and his co-worker were feeding ground wire underneath a transformer cabinet. His co-worker was pushing down on the ground cable with a metal framing system when the tension on the cable released, causing the metal framing system to drop down onto the employee's right hand. As a result, the employee sustained an amputation of the right index finger above the first knuckle.",0
An employee was operating a machine when it amputated several fingers on his right hand.,0
An employee was using a band saw to cut pork chops when their right index finger contacted the  blade resulting in a laceration/fracture.,1
"An employee was holding a 2-foot section of tubing on a bender machine when the die closed on the employee's finger, resulting in an amputation to the right ring fingertip.",0
An employee was operating a forklift and crushed his right hand between the forklift and a fiberglass mold. Four fingers on his right hand were amputated.,0
"An employee was helping to offload a 267-pound cement load-bearing handhold from the flatbed of a truck when his left hand was caught under the handhold, injuring two fingers. He was hospitalized and had surgery.",1
"An employee was observing a concrete precast form being moved and cleaned when the form headwall shifted and impacted his left foot, crushing it.",1
An employee was in the process of moving over ceiling lights in the electrical grid. The employee was daisy chaining lights to a main panel's junction box in an electrical closet when he received 277-volt electrical burns on both hands.,1
"An employee fell from a height and was hospitalized for a broken nose, a fractured right elbow and lacerations to the forehead and knee.",1
An employee was pushing a stream liner cart full of files when her supervisor noticed she was having problems breathing. She was hospitalized.,1
"An employee was transporting a patient in a vehicle. The employee struck their head, slipped, and fell on the vehicle's access ramp, suffering a broken wrist.",1
An employee was moving metals from a powered rotating table when his finger got pinched between the metals (approximately 25 pounds) and the edge of the wood table top. His right middle fingertip was amputated.,0
An employee was standing next to a material handler preparing to cut material being removed from the pile. A steel lattice beam fell from the pile and struck the employee fracturing the employee's left foot and right lower leg and ankle.,1
"An employee was descending an 8-foot fixed ladder when she lost her grip on the ladder and fell approximately 3 to 5 feet to the ground, suffering a laceration and hematoma to the forehead and abrasions to the left cheek.",1
"On November 6, 2019, at 11:50 AM, an employee was using a gas-powered chain saw to cut shrubs when the saw contacted his left foot, causing a fracture and cutting two tendons.",1
"At 11:50 a.m. on November 6, 2019, an employee was using a gas-powered chain saw to cut shrubs. The saw cut his left foot, cutting two tendons and causing a fracture.",1
"On November 6, 2019, an employee fell 21 feet from the roof of a utility building to the ground below when the framing supporting their body weight broke. The employee sustained a shoulder fracture, rib fractures and a punctured lung.",1
An employee was watching a crane lower an overhead load when the load struck and broke his right ankle.,1
"An employee was moving suspended metal plates when they fell onto the employee's hand, causing an amputation.",0
An employee was using a come-a-long when the chain snapped and the come-a-long fell onto the employee's foot breaking a toe. The toe was medically amputated.,1
An employee sustained a fractured leg while trying to move a blast pot used in abrasive blasting.,1
"An employee was walking to his vehicle in the parking lot when he slipped and fell on ice, fracturing his ribs.",1
An employee was dismantling a manual overhead bay door. His hoodie was caught in the spring when it was released and hit left arm was broken.,1
"A transformer fell from the forks of a fork truck, striking an employee. The employee suffered respiratory complications.",1
"On November 7, 2019, at 2:30 p.m., an employee performing aircraft servicing prior to departure slipped and fell due to glycol on the ground. The employee was hospitalized with a fracture to the right ankle.",1
An employee sustained a partial amputation of the left pinky when a door closed on his finger.,0
An employee was transferring bulk material from a tanker truck to a storage tank. The employee's leg was struck by the transfer hose when the hose coupling broke. The employee was hospitalized with a fractured lower leg and required surgery.,1
"An employee was on a ladder stand, removing bolts. He fell to the ground and suffered broken ribs.",1
An employee was walking to work from her car when she slipped and fell due to icy conditions. She suffered a broken leg.,1
An employee was walking from their car to the facility in the morning when they slipped on ice and sustained a fractured right ankle.,1
"An employee was stepping down from a forklift when he slipped off the running board and fell to the ground, sustaining a broken right wrist.",1
"While operating a coin sorter an employee noticed the conveyor belt was not operating properly. While adjusting the tensioner, his left index finger was caught between the belt and gear and was amputated.",0
"An employee was helping to check bearings on an air handler. The employee's right little finger got caught in the pulley, causing the fingertip to be amputated.",0
An employee hanging dry wall fell from a 6-foot ladder to the concrete floor. The employee was hospitalized with a spleen injury and rib fracture.,1
An employee assisting customers at the self check-in kiosks tripped over a customer's bag. The employee fell to the floor and was hospitalized with a fractured hip.,1
An employee was feeding 2x4s into the horizontal band saw. Saw dust was being ejected toward him so he went to clear the dust port. His right index finger contacted the blade and required surgical amputation.,0
A temporary employee was using his left hand to push a piece of stock into a rolling machine when his left pinky and ring fingers slid into the rollers and were crushed.  The employee was hospitalized.,1
An employee was cleaning a bender/tumbler while mixing pellets and was struck by the blades resulting in lacerations to three fingers.,1
"An employee slipped on wet stairs as she was walking down them. She fell, suffering a strained neck and lower back.",1
"An employee was climbing down an A-frame ladder. At the third step from the bottom, he slipped and the right side of his upper body struck the corner of a metal tote stand. He suffered four broken ribs.",1
"An employee at a customer site was attempting to free a stuck pallet. When the jack came free, the employee fell backwards sustaining a fracture to their left wrist requiring hospitalization and surgery.",1
"On November 7, 2019, an employee was signaling a 75-ton crane from the ground. It began to rain, and a galvanized tube (12 feet long, 4 feet in diameter, weighing 500 pounds) slipped from the crane's rigging and fell. It bounced from a second-story beam and hit the employee, breaking a bone in the employee's foot and cracking three ribs.",1
An employee was unloading a new trackhoe from a tractor trailer. The trackhoe's tracks moved and crushed the employee's hand. The employee's left index finger was amputated.,1
A deck hand was attaching a shackle to a deck line and a hole in a dolphin (circular bridge protection dome) on the water when the shackle released and landed on his fingers. He sustained amputation of his left pinky fingertip and a laceration to his left ring finger.,0
"On November 7, 2019, an employee was performing setup and changing the coil on an automatic crimper machine. As the employee was feeding the coil into a new point of terminals, the machine actuated and the anvil came down on his finger. The finger was amputated.",0
An employee was loading a trailer when the portable ramp slipped off the back of the trailer and fell onto his left hand and amputated the middle finger.,0
An employee was guiding a beam to the area where prefabrication was to take place. An all-terrain forklift rolled over his left foot and ankle causing multiple fractures to the ankle.,1
"An employee was sorting and packing polishing wheels. The employee tripped on a wheel on the floor and fell, suffering a broken left hip.",1
"At about 1:30 p.m. on November 8, 2018, a truck driver was climbing down the ladder of his trailer after getting a sample of the corn germ that a customer had just loaded into the trailer. He slipped off the ladder and fell 10 to 12 feet onto concrete, suffering a concussion and fractures to the nose, wrist, hand, and leg.",1
"An employee was placing a trailer axle on a jack stand when the employee's index finger was pinched between the axle and jack stand, resulting in an amputation.",0
"Two employees were reinstalling bolts on a steel ring that held a rubber membrane in place on the bottom of a laundry press. The metal basket had been raised using the system's hydraulics so the ring could be accessed. The basket dropped onto one employee's fingers, causing fractures and lacerations.",1
"An employee was pulling into a customer's driveway. The employee fell out of the truck to the concrete, suffering a broken left leg.",1
"An employee was conducting a survey in a parking lot. A vehicle struck the employee, who suffered a hip fracture.",1
"An employee was folding logs of dough in half on a cart behind a ravioli former. The employee tried to remove a small piece of hanging dough, and the employee's left ring fingertip was pinched between the side of the anvil roller and the die roller. The fingertip was amputated.",0
"An employee was disposing of old coffee. When the employee poured it into a cleaning bucket, it melted through the bucket and spilled onto the employee's legs, burning the employee's thighs.",1
"Two employees were carrying a large pot of hot fish stock, each holding one handle of the pot with both hands. One of them tripped on the leg of a shelf and fell and the stock spilled from the pot, splashing him. He suffered burns to the right arm and the right side of the lower back.",1
"An employee was providing ground support and acting as a spotter when a steel wire that was being lifted drifted toward a boom cylinder. The employee was trying to stop it from striking a digger derrick when the employee's pinky and ring fingers were pinched between the wire wheel and the boom cylinder, resulting in partial amputations of both fingers.",0
An employee was cleaning a cocoa press. The machine caught the employee's left index finger and amputated it between the first and second knuckles.,0
"An employee was cleaning equipment when his left index finger was caught in the equipment, resulting in a fingertip amputation.",1
"While lifting a metal kitchen exhaust, an employee slipped on snow/ice. The kitchen exhaust fell on the employee's arm, causing contusions.",1
"An employee was checking the material level in the melter on a striping truck, which was parallel to a 
supply truck from which a hose was running into the melter. The hose ruptured and the employee was sprayed with molten thermoplastic. He suffered second- and third-degree burns to the face and the back of the neck, and some plastic adhered to his skin.",1
"An employee was operating a rag tearing line. The material jammed in the line; as the employee was unjamming it, the exit rollers grabbed the employee's left hand and broke it.",1
An employee was clearing a jam in a rinse tank in a galvanizing-after-weaving department. The employee slipped and fell into a hot galvanizing tank next to the rinse tank. The employee suffered burns to the sole of a foot and the lower leg.,1
"An employee fell from the second level to the first level in a mushroom house, suffering head and back injuries. The employee was hospitalized.",1
An employee left a vehicle to check clearance for a turn. The vehicle moved forward and pinned the employee against a guardrail. The employee suffered multiple fractures in both legs.,1
"An employee was transferring an air pallet from a stationary rack to a dolly. The pallet tilted, catching the employee's foot and amputating the big toe and the second toe.",1
Two employees were putting a down joint of pipe on the back of a fracturing pump unit for mobilization. The down joint was to be placed between the ladder and the step handle. One employee's right index finger was caught between the joint of pipe and trailer deck of the unit. The finger was injured and was surgically amputated.,0
An employee was cutting chicken wings in a deboning area. A saw blade amputated the tip of his left middle finger.,0
An employee fell from a ladder and broke her leg. She was hospitalized.,1
"Employees were setting 5-foot by 5-foot concrete mechanically stabilized earth (MSE) wall panels. While they were adjusting a panel, the tooth of an excavator caught the metal strap of an adjacent retaining wall, causing it to fall over and break an employee's pelvis.",1
"An employee was manually offloading an 1,130-pound manlift from a trailer at a jobsite. The manlift rolled over the employee and then toppled over him. He suffered three broken right-side ribs, a broken left clavicle, head lacerations on the left side, a lacerated left ear, and a broken lower-back vertebra.",1
"An employee was driving a flat, bag cart. While making a left turn, the cart struck and amputated his left index finger from the top joint to the tip.",0
An employee was helping a welder when he fell through a floor hole from the second floor to the first floor. He suffered a broken elbow and hip.,1
"An employee was emptying a garbage can while standing on a ladder/stand. He fell to the ground, hit his head, and lost consciousness.",1
"An employee was cutting meat with a saw. The saw hit the employee's left thumb, causing a partial amputation.",0
An employee was driving sheet piling when a sheet piling hammer fell on the employee. The employee suffered fractures to the left leg and facial fractures; the employee's left arm was medically amputated.,1
"An employee was on a catwalk, unjamming a sheet of material at the cross-cut saw on an extrusion line. The employee's right leg was caught between a fixed roller conveyor and a saw carriage that moved back and forth on the conveyor. The employee suffered a compound fracture to the leg.",1
An employee was leaving a patient's home. She fell as she stepped down; her right knee struck the concrete and her femur was broken near the knee.,1
"An employee was walking down metal stairs. The employee's ice cleats got caught on the stairs and the employee fell back against the stairs, suffering two broken vertebrae.",1
"An employee was reaching down to pull a stuck board from an unscrambler machine. The machine gate came down and smashed the employee's upper body. He suffered a cut above the eye, as well as cuts and scrapes to the head that required stitches.",1
"An employee was mopping a train car. The employee fell out of the train to the concrete ground, suffering five broken ribs.",1
Two employees got into a fight at a work station. The both went to the floor; one suffered a shoulder injury and was hospitalized.,1
An employee was cleaning glue rollers on a press machine. The rollers caught the employee's right hand and amputated three fingers. The machine was guarded at the time.,1
"An employee was working on a stacking machine. The cart moved and struck the employee, who fell onto a stop plate and suffered a broken lower-back vertebra.",1
"An employee was walking inside an airport terminal when his radio fell down. As he went to pick it up, he lost his balance and fell onto his right knee, fracturing it. He was hospitalized.",1
"At about 9:30 p.m. on November 9, 2019, an employee was trying to retrieve a cheese block from the top shelf inside a walk-in cooler. She fell from a metal keg, which struck and lacerated her right shin under the knee.",1
"An employee was stacking pallets with a forklift. After getting out of the forklift, the employee was struck by a falling pallet and suffered a pulled neck muscle.",1
"An employee was on her way to do an inventory count at a store when she tripped over uneven concrete in the parking lot and fell, fracturing her ankle. She was hospitalized and had surgery.",1
"An employee was cleaning box labels off a conveyor. The employee was removing a label from under the roller when the conveyor caught the employee's right arm, pulling it in. The arm was broken and the employee was hospitalized.",1
"At 1:30 p.m. on November 10, 2019, an employee was working near a confectionery-making machine's reject conveyor. The conveyor caught and lacerated the employee's little finger, and the fingertip was amputated.",0
"An employee was inside an aerial lift while placing sheeting on the underside of a bridge when the employee fell 16 to 18 feet from the lift basket, fracturing the pelvis and both wrists.",1
"An employee was moving a ladle hoist into position to pour material into a form. The metal framework for the hoist came loose and fell 8-10 feet onto the employee, striking his hand, arms, and shoulder.",1
An employee was trying to release solids in a centrifuge that had packed off. His left ring finger was caught between a belt and a pulley and the fingertip was amputated.,0
"On November 10, 2019, an employee was on a step ladder, trying to clear a piece of plastic from the head pulley on the product belt of a crusher. The employee fell from the ladder into the conveyor, suffering an amputation to the left little finger.",0
An employee was knocked to the ground while breaking up an altercation between two customers outside a market. His head hit the floor and he suffered head injuries.,1
"An employee was putting trays on a conveyor. The chain came off the sprocket. While trying to get it back on, the employee suffered an amputation to the tip of the left ring finger.",1
An employee was operating a sash welder. The employee's chest/shoulder was caught and crushed between two heads when the welder cycled. The employee was hospitalized.,1
An employee was exiting a trailer when he was robbed and hit on the head with a pistol. He suffered a head injury.,1
An employee was dumping sand from his truck. The truck tumbled over and the employee hit his head on the inside of the truck door. He suffered a laceration to the top of the head that required stitches.,1
"An employee was erecting a scaffold when a plank board he was standing on broke. He fell 6 feet, suffering injuries to the left knee and right ankle.",1
An employee's left hand was caught between the deck of a trailer and a piece of equipment as the trailer bed was lowering. The little finger was amputated.,0
"An employee was working with an irrigation machine when his finger slipped and was caught by the machine's chain, resulting in a fingertip amputation.",0
"An employee was using a scissor lift, working on the chain drive for a roll cooler line. The employee's right hand was caught in the chain and his index finger was amputated.",0
A pop-up saw amputated an employee's right ring fingertip.,0
"An employee was adjusting sheet metal on a machine. The machine came down on the employee's left index finger, amputating the tip.",0
"An employee was tightening the valve on a 120-liter HDPE tank. The nipple to the valve broke off, releasing the sulfuric acid in the tank. The acid sprayed the employee's upper chest, arms, thighs, and face. He suffered second-degree burns on the body and third-degree burns on the legs. He was hospitalized.",1
"An employee was moving calves from one trailer (cattle trailer) to another (semi-trailer) when the trailer door closed on his finger, partially amputating his left index finger.",0
An employee was using a leaf blower to blow leaves. The employee stepped off a curb and was struck by a lawnmower. The employee suffered a broken left leg and knee injury.,1
"An employee was helping someone roll a steel tie bar onto a cart when the tie bar fell and the employee attempted to catch it. The tie bar rolled on top of the employee's left ring and middle fingers, crushing them and resulting in a partial traumatic amputation of the left middle finger through the phalanx.",1
"An employee was climbing down the ladder of a front end loader. He fell at the last step, landing on his right foot about 3 feet below and suffering a twisted ankle. He was hospitalized, requiring surgery.",1
"An employee was using a stand grinder to grind a riser and contacts off a casting. His left little finger made contact between the casting and the grinding stone, and the grinding stone caused a partial amputation to the finger.",1
"A forklift operator was using the forklift to take pallets from receiving docks to a reserve storage location. The forklift reversed and his left little finger was pinched between the forklift and a rack, causing an amputation of the fingertip with bone loss.",0
"Two employees were cleaning up debris in a yard. A piece of wood fell over as one of them was swinging an axe to split it; the other employee's left hand was caught between the wood and the axe, and the ring finger was amputated.",1
"An employee fell approximately four feet to the ground while exiting a wind turbine, breaking an arm.",1
"An employee was trying to pull out a stuck cage inside a baghouse. The cage's lid crushed the employee's left index fingertip, causing an amputation.",0
An employee fell off a ladder and fractured his hip. The employee was hospitalized.,1
An employee was clearing wood on a conveyor system when his glove was pinched. He jerked his hand back and his left index finger was amputated.,0
An employee was running a coiler. His left hand was caught between the fixed arm and the moveable arm when the machine operated; the thumb was amputated at the tip.,0
An employee received steam burns to the left hand/arm after reaching over a bowl that was boiling on a kettle while making pastries in a resort kitchen. The employee was hospitalized.,1
An employee was operating a garbage truck. Part of the vehicle caught him and fractured his wrist.,1
"An employee was replacing the rubber gasket on a dredge boat's discharge pipe. The dredge boat was moving with the waves, which pushed the dredge pipe into the pontoon of the boat. The employee was holding the end of the dredge pipe when it struck the pontoon of the boat. The employee's right index finger was caught between the end of the pipe and the pontoon, resulting in a fingertip amputation.",1
"A manufactured walkway (8 feet long, 3 feet wide, and 3 feet tall) fell over while being lifted. It caught an employee's left ring finger and amputated the tip at the nail bed.",0
"An employee was inspecting a fiberglass saw, adjusting the height of the clamp. His left thumb was pinched between the clamp and the saw and amputated.",0
A correctional officer was attempting to secure an inmate who had a suspicious item. He was holding onto the inmate with his feet planted on the ground as the inmate tried to break away from him. This caused the officer to fall to the ground. He was hospitalized with dislocated kneecaps.,1
An employee was lowering the wheels on a tractor-trailer when the crank started to spin and struck him in the head. He suffered a concussion and was hospitalized.,1
"An employee was moving an 800-pound core box with a hoist. As the box was lowered, it slid off the hoist hook and struck the employee's ankle, breaking it.",1
"An employee was climbing a 6-foot ladder. The ladder wobbled, then fell; the employee fell with it to the floor and suffered a back injury. He was hospitalized.",1
"An employee was walking up a ramp to a patient's home. The ramp was wet and cold, and the employee slipped and fell, suffering a broken left leg. The employee was hospitalized, requiring surgery.",1
An employee fell in a parking lot and his head struck the ground. He suffered brain bleeding.,1
"An employee was ""charging"" a furnace with more metal stock. There was a reaction when the metal stock was placed into the molten metal in the furnace, and molten metal blasted off onto the employee. He suffered burns to his hands, torso, and legs.",1
"An employee was pinned between a forklift and the wall of a trailer, suffering a bruised chest.",1
"An employee was troubleshooting a fan belt on a conveyor system. The belt amputated the employee's left ring, middle, and index fingers, and the employee was hospitalized.",1
An employee was adjusting a piece of cardboard behind the draw rolls on a bag machine. The rolls caught and crushed the employee's right index finger. He was hospitalized and the finger was medically amputated.,1
"An employee was sealing bags with a heat sealer. The employee's right little finger got caught in the sealer, and the tip was amputated.",1
An employee was given diluted industrial degreaser and told it was a sports drink. The employee drank the liquid and was hospitalized.,1
"An employee was preparing wiring and other components for power line installation. A de-energized line became hot and the current burned the employee's hands and legs, most severely injuring the employee's left hand.",1
"An employee was cleaning a clogged box tipper screen that weighed 45 pounds. As the employee removed the broom handle that held the screen up, the raised screen fell and crushed the employee's left middle finger. The fingertip was medically amputated.",1
"An employee was punched in the face by a client, suffering a sprained jaw. He was hospitalized.",1
An employee was unloading an air conditioner unit from a pickup truck when the employee dropped the unit and fell backwards on the curb. The employee experienced swelling of the spinal area and was hospitalized with a lower back contusion.,1
"An employee was preparing to load a tanker truck. The employee slipped and fell from the top of the truck to the concrete floor and suffered a concussion, fractures and cuts/lacerations.",1
An employee suffered a hernia while changing bedsheets. He was hospitalized.,1
An employee suffered an avulsion of the right thumb tip while cleaning a machine. The machine was guarded at the time of the incident.,1
"An employee was standing at the rear of a big rig attaching a cable. The wind blew the door shut and caught the employee's left middle finger, causing an amputation at the first knuckle.",0
"An employee was attempting to push a roof truss into a larger roller press with his right foot when his shoe laces or pant leg became caught on the truss. The truss then pulled his foot/leg into the roller press, resulting in the amputation of his right foot.",0
"An employee was installing sprinklers for landscaping while a dump truck from another company was dumping sand close to a highline wire. The dump truck hit the energized wire, causing it to split and fall on top of the employee. He received an electrical shock and experienced trouble breathing, a sore chest, and burns from the neck down.",1
An employee was setting up a rail press machine. The press amputated the employee's right middle finger.,0
An employee broke both his arms in an endless sander.,1
An employee was walking and stepped on the edge of a sidewalk (next to grass) when her foot became caught on the edge. She fell forward and rolled to her right to try and catch herself but landed on her right shoulder. She suffered a right shoulder strain and contusion.,1
"An employee was removing a stuck 100-pound fiberglass fan blade from a mold. A wedge between the blade and the mold came out, and the blade dropped down and lacerated his right ring fingertip. He was hospitalized.",1
An employee was operating a lift truck when it struck a guardrail. His left foot was caught and he suffered an amputation to the heel.,0
"An employee was walking in the yard when he was clipped/hit by a truck's mirror while the truck and trailer were backing up. The employee fell to the ground and the truck tire ran over his left leg, fracturing bones above the ankle and below the knee. He was hospitalized and had surgery.",1
"A cashier was using three buckets stacked upside down as a step stool to install a flat cardboard box over the cashier's register hut's roof to keep the sun out. The buckets tipped over, causing her to fall about 2 feet to the ground. She suffered a broken right leg and was hospitalized.",1
"A forklift struck a Hwashin American employee as it backed up. It knocked down the employee and ran over both of the employee's legs, breaking them.",1
"An employee was dumping a 55-gallon drum into a galvanizing trough with the assistance of a cab-operated crane. As the drum was dumping, the employee's thumb was pinched between the drum and the galvanizing trough. The employee suffered a broken left thumb that required surgery.",1
"An employee was helping another employee box antenna equipment. The other employee left to get something and when he came back, he found the injured employee on the concrete floor with a head injury.",1
"On November 12, 2019, an employee working at Tri-City Heat Treat was walking to retrieve tools from a parked vehicle when the employee slipped and fell onto an ice-covered walkway, suffering a broken hip.",1
"An employee was descending a ladder when he fell from the third rung from ground level to the ground, breaking his leg.",1
"An employee was walking from his car into the building when he slipped on the icy sidewalk and fell. His head hit the concrete, causing brain swelling that required hospitalization.",1
"At 5:30 a.m. on November 12, 2019, an employee was unhooking and moving a dolly converter from a trailer. The employee's right index finger got caught in between the dolly converter's safety chain and the dolly itself, and the tip was amputated.",0
"On November 12, 2019, a temporary employee was attempting to remove a stuck label from inside a label machine when her left hand became caught and fractured between the machine's paddles. The machine was operating at the time of the incident.",1
"An employee was on the air ring of an extruder drum, trying to pull up a foam sheet that was being fed from a lower platform but had jammed against a slitter blade. The employee's left index finger contacted the stationary slitter blade, and the pad was cut off.",0
"An employee was sitting on a maintenance sweeper scrubber, training another employee on a reach truck, when the employee was struck by a pallet that was released from the pallet return. The injured employee suffered a skull fracture.",1
An employee was being trained on how to operate a high-reach forklift when he hit his head on a cross brace and broke his jaw.,1
"An employee was unwrapping a skid when her shoe became caught in the plastic wrapping. She fell to the ground, landing on and contusing her left hip.",1
"An employee was being trained on crane operation when a bundle of steel bars pushed the employee's right hand into a cabinet, resulting in the amputation of 3/4-inch of the employee's right middle finger.",0
An employee was blocking product on the shelves when he had an asthma attack and was hospitalized.,1
"An employee fell from a truck loaded with trusses, suffering a broken femur.",1
"An employee was cutting a 1-inch steel tube with a bandsaw. The blade caught the tubing, and the employee's left thumb was pulled in toward it. The thumb tip was amputated.",0
"An employee was operating an overhead crane and loading I-beams into the camber machine. The camber machine bends the steel I-beam by securing the ends of the beam and applying hydraulic pressure to the center.  The employee was approximately 6 to 8 feet to the side of the machine waiting to load another beam when one of the blocks that secure the ends of the I-beam failed.  The block ejected from the camber machine and struck the employee, fracturing the lower left arm in two places.",1
"While stepping off a deck that was 2 inches above the floor, an employee suffered a twisted right ankle and fractures to the tibia and fibula.",1
An employee was working on a sling for a three-part form when the safety latch unhooked and fell on the employee's head. The employee suffered a head laceration and broken jaw.,1
"Four employees were inside a warehouse, installing a 15-foot-long steel beam for the top of a roll-up exterior door yet to be installed. The beam twisted as it was being installed into a notch and struck one of the employees in the face. The employee was hospitalized.",1
"An employee was struck by a bundle of tubing that slid off the forks of a forklift, suffering a fractured left hand and right leg.",1
"A water tank driver was offloading at a job site when the employee's elbow struck a valve. The cap from the valve came off and struck the employee in the stomach, cutting the abdomen. The employee was hospitalized.",1
An employee slipped on ice in a parking lot while conducting a pre-trip inspection. The employee suffered a broken ankle.,1
"The injured employee and a coworker were moving a walk-behind powered pallet stacker down a slight decline from an elevated platform to a lower level to prep for moving additional equipment on the lower level. The stacker moved quicker than expected and the brake did not activate sufficiently enough to stop the stacker completely on the decline. The stacker continued to move down the ramp, causing the employee to let go of the machine handle. Once the stacker reached the flat surface it spun to the right, striking the injured employee on the right side of his right foot causing a broken right foot and a laceration.",1
"An employee was using a knife to remove a solid gasket that was attached to the manway of an oil/gas/water separator. A vacuum on the separator was being used to draw the remaining contents out of the bottom of the tank to a vacuum truck. The vacuum pulled the employee forward, causing a traumatic head injury, an injury to a neck vertebra, several damaged/broken ribs, and a collapsed lung.",1
An employee was connecting a trailer to a work truck. His right middle finger was caught in the ball hitch's connection point. He suffered a partial amputation to the finger.,1
"An employee was dismantling a scaffold when the employee fell 40 feet from the scaffold to the ground, suffering multiple injuries.",1
"An employee was using an arc gouger with compressed air when his fire resistant shirt caught a hot spot. The hot spot was put out but rekindled, resulting in a burn on the employee's left tricep. The employee was hospitalized.",1
"An employee was using a 12-foot ladder to change a light bulb. He was working from the fourth rung when he fell to the ground, suffering leg and heel fractures. He was hospitalized.",1
"An employee was using an overhead crane to lift a metal basket used to move tubulars. As it swung off a stand, the basket hit him on the right upper thigh and knocked him to the ground. He suffered a deep cut (to the bone) and a bone bruise; he was hospitalized, requiring surgery.",1
"An employee was involved in lifting a pipe out of a double service well rig and taking apart the slip bowl assembly. The operator had attached the lift sub to bring the pipe up when the threads failed, causing the pipe to come back down and amputate four of the fingers on the employee's left hand.",0
An employee was observing the operation of a lint cleaner when he attempted to move the cotton and his right hand was caught between the rollers. His hand was crushed and sustained a possible fracture.,1
"An employee was reattaching a thumb grapple to an excavator when he lost control of the hydraulic and his hand was pinned between the hydraulic and the thumb grapple. He suffered a severed tendon and broken finger, requiring hospitalization.",1
"An employee fell while walking down the stairs, suffering a broken ankle.",1
"An employee fell while getting off a school bus, landing face up on the concrete sidewalk. The employee suffered a laceration and swelling on the back of the head, as well as brain bleeding, and was hospitalized.",1
"An employee was talking to a forklift operator when the forklift struck the employee's right foot, causing tissue damage.",1
"An employee was picking up material from the floor under a crane. A crane attachment fell onto him, breaking his right leg and foot.",1
"An employee was walking to his car in the parking lot when he stepped off a curb, lost his balance, and fell to the ground, landing on and breaking his hip. He was hospitalized.",1
"An employee was delivering supplies to the store and putting them away when the employee tripped over a tote of materials, falling to the floor and fracturing the right shoulder.",1
"An employee was operating a palletizing machine when the employee's arm was pinned between the palletizer apron, the mesh belt of the section behind it, and a lower bracket. The employee was hospitalized with a pinched and bruised arm.",1
"An employee was walking to do a sales call at a business when the employee slipped and fell on gravel, breaking the left femur.",1
"An employee was using a trackhoe to move a water line in a trench using the bucket and a strap. The strap slipped and the pipe struck the employee, knocking the employee into the trench. The employee suffered two broken legs and was hospitalized.",1
An employee was walking near a dolly tug while it was making a U-turn when the employee was caught between the dolly tug and an air can (cargo container). The employee was hospitalized with a muscle injury to the left ankle.,1
An employee was attaching forks to a delivery truck. The employee was clearing snow and ice from a pin hole when the fork was pushed to slide it into place. The employee's right index finger was amputated beyond the third knuckle.,1
"An employee was on an 8-foot step ladder wiring an LED light fixture when the employee received an electric shock and fell approximately 6 feet to the floor. The employee was hospitalized with a head contusion, a hematoma to the posterior head with a small abrasion, a thoracic spine compression fracture, blistering to the right index finger, and an avulsion to the left index finger.",1
"At about 3:00 p.m. on November 13, 2019, a roofer was climbing down a ladder when he slipped on debris and fell to the ground, suffering a compound fracture of the left ankle.",1
"A temporary employee was bolting down steel poles. A spiral section struck him as it was being lowered, breaking three bones in his thumb.",1
An employee was attempting to remove the pony rod from a pump when his finger was caught in between the pony rod and the pump metal base. He received fractures to his left-hand index finger and was hospitalized.,1
An employee fell while descending a scaffold. He suffered a broken tibia.,1
"Two employees were moving metal baking carts. One of them suffered an amputation to the right middle fingertip, below the nail, when it was caught between two of the carts.",0
"An employee was conducting a demonstration of a large commercial blower used to remove leaves from sports fields and parking lots. He was using the blower on an incline and lost control of the machinery, which then struck his leg and fractured his tibia.",1
"A maintenance employee was cleaning a piece of fiber from a roller shaft bearing when the roller turned and the protruding teeth struck the employee, causing an amputation to the right index finger.",1
An employee was on a ladder repairing an overhead vacuum hose when the employee fell from the ladder and fractured the left ankle.,1
"Employees were pouring concrete in drill shafts. An overhead power line arced, struck the concrete pump truck, and struck an employee. The employee was shocked and lost consciousness, and was hospitalized to treat right hand/fingertip burns.",1
"A temporary employee was making a delivery when he fell off a loading dock to the ground and broke his leg, requiring hospitalization and surgery.",1
"Two employees were checking the baskets in a dual filter basket system for debris. The hot water flow had been diverted to one basket while they checked the other one; as they were about to replace that basket's lid, there was a pop and hot water rushed into it, scalding the two employees and causing second- and third-degree burns on their arms and chests. One of them was hospitalized.",1
"While running a plastic extrusion line, an employee saw a piece of plastic that was stuck, shut off the machine, and attempted to remove the plastic. The employee was contacted by moving parts, resulting in a thumb amputation.",0
"On November 13, 2019, an employee was working on a paint line and noticed a defect on an aluminum coil. He was trying to brush off the defect when the strip grabbed his right hand and pulled him into the rollers of the accumulator tower. He suffered a dislocated right elbow that required surgery and bruised ribs.",1
"An employee was sanding the pulleys on a ski lift when the employee's hand was pinched between a pulley and the drive belt, amputating the right hand. The employee's head also struck the upper pulley, causing head lacerations and the loss of teeth.",1
"An employee was cutting meat with a meat saw when the top of the employee's right hand contacted the saw blade, causing a laceration and cut tendon.",1
An employee was cleaning drum rollers. The rollers spun and the employee's hand was pulled in and crushed.,1
"An Emera Maine employee was using a hammer drill to drill a hole in concrete. His mitten slid off the hammer drill and got caught in the drill bit, causing the employee's left thumb to be amputated.",0
An employee slipped on black ice in the parking lot and hit the pavement.,1
"An employee was welding on an overhead unit when weld slag dropped onto his clothing, resulting in second and third degree burns to the back.",1
An employee was disconnecting a 2-inch coupler on a steam line to remove a clog. The coupler had been loosened an hour earlier to release pressure. The employee loosened the coupler further to perform the maintenance and was hit with steam on the right arm and back. He suffered second-degree burns.,1
"An employee slipped/tripped and fell on a paved surface, suffering a broken right lower leg that required surgery.",1
"An employee was using a shaper to cut a cabinet door when the board kicked back and his hand slid into the shaper blade, cutting his right index and middle fingers.",1
"On November 13, 2019, an employee was getting carts from the parking lot. A bungee cord was placed along the side of 6 to 8 mini carts to hold them in place by the cart corral, with the intention of bringing them into the store. The cord came loose and the plastic hook went through the employee's glasses and gouged part of the employee's eye.",0
"An employee was operating a band saw when his right hand contacted the saw blade, resulting in amputation of his right middle and ring fingers.",0
"An employee was driving an electric pallet jack. While the jack turned by the end of an aisle, the employee's left foot got caught between the jack and the racking. He suffered a mild bone displacement.",1
"An employee was checking a wire for scratches on a block machine wheel when the employee's right hand was caught in the wheel behind the block, resulting in a middle finger amputation.",0
"An employee was driving to the next destination on a lab route when she lost control of the vehicle on the icy roadway and crossed the center line, colliding with an oncoming vehicle in the opposite lane. She suffered multiple broken bones in her legs, arms, feet, and pelvis.",1
"An employee was on a ladder. A peracetic acid solution splashed on the employee's hip, causing a burn that required skin grafting.",1
"An employee was connecting a pipe fitting when the pressure of the pump dropped and his pinky finger was caught between the fitting and pump stand, resulting in a severe fracture that required surgery.",1
An employee was moving waste lumber. The lumber slipped and the employee fell to the floor as he tried to move out of the way. His left wrist was broken.,1
An employee was about 13 feet high on a scissor lift taking a measurement. The employee fell off the back of the lift to the concrete below. The employee was hospitalized for head trauma and a broken collarbone.,1
"A maintenance employee was performing maintenance of a dock plate by using an electric pallet jack to extend the dock plate. 

During the process, the pallet jack wheel fell in between the dock and plate. 

The pallet jack then fell over, trapping the employee between the body of the pallet jack and a rail. The employee suffered a broken pelvis.",1
"An employee was removing a piece of rubber from a transfer belt when the employee's right arm was caught in the conveyor, fracturing the right forearm.",1
"An employee was operating a sample pack machine. The employee was helping spread out material in the sample pack bowl when the paddles advanced, trapping her right middle finger. The fingertip was amputated.",0
"An employee was working on a 10-foot ladder, installing conduit for a rough-in. The employee fell 8-10 feet to the concrete floor below, suffering a concussion, bruises, and lacerations to the top of his head on the right side; internal bleeding in his head; a broken right collarbone; and three broken ribs.",1
"An employee was in the trailer inspection lane at a facility to have his trailer inspected for suitability to load. There was a small amount of debris inside the trailer. He climbed into the trailer, collected the debris, and put it at the rear of the trailer for disposal. He then climbed down from the trailer and stepped onto the ground. The pavement was wet and sloped toward a drain, causing him to lose his balance and fall to the ground. He attempted to catch himself with his left hand and arm, and his left wrist was fractured as a result of the fall. He was hospitalized and had surgery.",1
"An employee was sitting on a stool when the employee fell off the stool to the floor, suffering broken bones.",1
"On November 14, 2019, an employee tripped and fell while walking through a packaging area. He landed on the concrete floor, breaking his right hip.",1
An employee was operating a picker when it malfunctioned and struck a support column. The employee suffered an elbow injury that required surgery.,1
"An employee had completed a welding job inside an industrial boiler and was removing a bladder from a water pipe, as the last step, and was outside the confined space when hot water spewed out, causing second and third degree burns to his right hand.",1
An employee was helping to prevent an engine block from falling when the engine block blade caught and amputated his right index fingertip.,0
"An employee was kicking out a piece of pipe. As the pipe kicked out, the two jack cylinders from the turn rolls were not fully retracted, causing the pipe to knock the turn rolls over. As the employee placed his hand on the frame and was attempting to re-center the turn rolls, the frame of the turn rolls slid off the jack cylinders and pinched his left middle finger against the frame assembly and the floor plate. As a result, his left middle finger was partially amputated.",0
"On November 14, 2019, an employee was using a nail gun to conduct roofing activities when he put the nail gun down and went to get more shingles. When he picked up the nail gun, he accidentally hit the trigger and a nail shot into his leg. He was hospitalized with a puncture wound to his leg.",1
An employee was monitoring the transfer of raw material via a temporary feed pipe. The pipe slipped; the employee's left little finger struck against the feed auger and was lacerated. The finger was medically amputated above the second knuckle.,0
"An associate was cleaning and sanitizing a cutter, which housed motor-driven blades used to cut the product created by an extruder. The employee's left thumb  contacted the cutter blades, resulting in an inch-long laceration to the back inner side of the left thumb that in turn caused a partial amputation of the thumb.",0
"An employee was greasing a tree shear attachment on an excavator with an automatic greaser when the tree shear head rotated while the employee was out of the cab and the equipment was idling. The shear head caught the employee's work vest and pulled the employee's right arm into the shear head. The employee suffered a deep laceration to the underside of the right arm up to the armpit, requiring hospitalization and surgery.",1
"An employee was helping a customer with a package in a parking lot. The employee tripped over a bicycle and fell to the concrete, breaking her hip.",1
A temporary employee was adjusting trays that were not stacking properly on a candy production line. The employee's right middle finger was caught in the line's chain and sprocket and was amputated at the first joint.,1
"An employee was carrying cases of water from ground level up a flight of stairs. When he squatted down to pick up the last three cases of water, he suffered a severe back strain with two torn discs. He was hospitalized.",1
"An employee was walking to her station while carrying a box when she met a work assist vehicle operator between pack stations and a rack. As the employee waited for the operator to reverse and clear her path, the operator accidentally moved toward her and hit her leg against the upright rack. She sustained a fractured shin bone.",1
"An employee was adjusting a sensor on an air cylinder. The machine was cycling to check the correct position when it faulted, so the employee went to re-position the sensor. Before he was finished, another employee at the controls reset the machine, causing the air cylinder to fire and pinch his finger between the air cylinder and top block of the assembly. His left index fingertip was amputated.",1
"An employee fell through a loose board on the deck of a flat, metal roof, landing on the concrete floor 14 feet below. The fall resulted in a fracture.",1
"An employee was passing wood over a jointer when the tips of his fingers on his right hand became caught in the machine, resulting in the amputation of three middle fingertips.",0
"While walking down the steps of an RV, an employee slipped on the wet surface and fell, injuring his left ankle.",1
"An employee fell in a parking lot, landing on the ground and suffered torn tendons above both knees.",1
"An employee was trying to remove a damaged hydraulic hose on a roll-off truck. The employee was using a wrench and heat to loosen a tight connection.  When the connection loosened, residual hot hydraulic fluid in the line leaked on the employee's forehead, burning it. The employee was hospitalized.",1
"An employee was cutting a piece of tube steel attached to a steel truss. A steel piece fell onto the employee's hand, smashing the hand and fingers.",1
An employee was standing on the deck of a truck when a tower crane-suspended load of concrete formwork panels struck the employee. The employee sustained a lower back injury and was hospitalized.,1
An employee was pushing a 5-inch by 8-inch piece of wood through a table saw blade. The saw blade amputated the employee's left index fingertip.,0
An employee sustained a partial amputation of the left index finger while cutting a mud flap with a saw.,1
"An employee was on a catwalk, about 10 feet high. When the employee opened a hopper door, ash flew out of the hopper and created a plume. While climbing down a permanent 10-foot ladder, the employee fell and suffered a broken femur.",1
An employee was taking waste out of a warehouse when her left index finger was pinched in a door. The fingertip was severed.,0
"An employee fell 10 feet through a hole in the roof after attempting to flip a piece of wood covering the hole. The employee suffered broken ribs, a broken thumb, and facial fractures and lacerations.",1
An employee was standing on a ladder installing an overhead plastic water pipe when he lost his balance and fell backward to the concrete floor. He suffered seven broken ribs and one cracked neck vertebrae.,1
"An employee was operating a pallet jack. Another forklift struck him, its forks breaking his left ankle.",1
"An employee was using compressed air to blow down the conveyor system when the air wand was caught by the magnetic roller, pulling the employee's hand in between the magnetic roller and the conveyor belt. The employee's middle and ring fingers were fractured.",1
"An employee was using a ratchet to apply pressure to and calibrate a torque wrench when the ratchet struck his eyeglasses and pushed them into his left eye, causing an eye injury.",1
"An employee was reversing a standup forklift when his right foot became caught between a steel rack and the forklift, fracturing his right ankle.",1
"On November 15, 2019, an employee was attempting to fix the water hose on a vertical band saw machine when two fingertips contacted the running saw blade and were amputated.",1
An employee was removing the metal cover off a radiator and cut his thumb on a sharp edge of the cover. The employee was hospitalized and required surgery.,1
"An employee was performing an in-home wireless installation when the homeowner's dog bit his finger. The bite became infected, requiring hospitalization.",1
"An employee tripped and fell on machine skates on the floor. His elbow struck the concrete floor and was broken; he was hospitalized, requiring surgery.",1
"On November 15, 2019, an employee fell while swiping a security badge to open a pair of double doors. The employee's head struck a door, causing two lacerations on the back of the head and fractures to two neck vertebrae.",1
"On November 15, 2019, an employee fell while straightening two pallets that were stacked on top of each other. The suffered a broken left hip and was hospitalized.",1
"At about 3:00 or 4:00 p.m. on November 15, 2019, an employee was doing a repair on a building while on an A-frame ladder, about 2.5 feet from the ground. He fell to the concrete floor, suffering a skull fracture, broken ribs, and a dislocated right shoulder, and was hospitalized.",1
"A delivery driver was in a dock receiving area, making a delivery. He was adjusting a dock plate when it fell on his left foot, causing a contusion that resulted in the amputation of the big toe.",0
"At 3:15 p.m. on November 15, 2019, an employee was pulling lumber at a green chain. The employee's left index finger was caught in a chain and sprocket. The finger was amputated.",0
"An employee was setting up a machine for a weekend run. The metal door closed on the employee's left index finger, causing a partial amputation.",0
An employee was unloading a UPS truck. The employee stepped on a package on the floor and suffered a broken left ankle.,1
"An employee was walking through an automatic door when it began to close and struck her. She then fell to the ground, hitting and fracturing her hip.",1
"An employee fell onto a conveyor belt and was carried along until he fell over 20 feet onto a cage. He suffered crushed legs, a broken spine, punctured lungs, and spinal injuries.",1
"An employee was unfolding the lift gate on a truck when the employee's fingertip was caught in a pinch point on the lift gate, resulting in a partial fingertip amputation.",0
"An employee had just finished dropping off a trailer at a plant. While leaving the cab, the employee fell to a curb below, landing on his back (on the left side, near the middle). He suffered two broken ribs, a collapsed lung, and a bruised lung.",1
"An elevator door closed on an employee's foot and the employee fell backward onto the floor, suffering a broken D12 vertebra.",1
"On 11/15/2019, an employee was prepping two molds on a prep table when the employee's right index fingertip was caught between the two molds, resulting in a fingertip amputation.",1
"An employee was reaching into a car trunk. As he was pulling an item out of the trunk, he pivoted and fell to the pavement. He broke both arms while cushioning the fall.",1
"At 8:00 a.m. on November 15, 2019, an employee was putting a vinyl sash into a fusion welder. The employee's right little finger was caught and pinched between the vinyl sash and the clamping plate and the fingertip was amputated.",0
An employee was operating a mini jerk machine when his hand was smashed between the lever and the machine.,1
"An employee fell about 18 feet into an excavation, possibly from a ladder. The employee suffered injuries and was hospitalized.",1
"An employee was climbing a ladder about 10 to 12 feet up when his foot slipped through the rungs and he fell backwards to the ground. The ladder then fell on him. His head either struck the ground or was hit by the ladder, causing a bruise on the brain that required hospitalization.",1
"An employee was attempting to install a new steel coil onto an uncoiler machine when the steel coil fell onto his left lower leg, causing a severe compound fracture.",1
"An employee was working on a piece of plywood panel when it fell onto the employee, who suffered a broken right femur and a broken left foot. The employee was hospitalized.",1
An employee was lowering a scissor lift. The employee's finger was caught in the lift and the tip was amputated.,0
"An employee was working with a metal pot that tipped over. Molten metal spilled out of the pot, contacting the employee's lower left leg. The employee was hospitalized with second degree burns and had surgery.",1
"At 10:30 on November 15, 2019, an employee was standing on a 6-foot stepladder, de-racking a 50-pound radar transmitter box. As the box was releasing from the housing rack, the rack's spring force moved the box with enough momentum to knock the employee off the stepladder to the floor. He suffered a laceration and a broken arm.",1
"An employee was pressure-washing a concrete walkway using a 10,000-psi water spin jet system. His hose got caught on the railing and the gun shot water onto his right foot, lacerating it.",1
"An employee had just opened an autoclave when a bottle of 5% hydrochloric acid and water pressurized and splashed hot acid on her face and neck, causing second-degree burns. She was hospitalized.",1
"An employee was getting ready to clear brush in the area and exited a tractor. As he was walking, a large tree limb hit him on the head. 
He suffered a fractured neck and was hospitalized.",1
An employee was helping the operator of a press brake machine. The employee's right-hand fingers were smashed in the machine and the employee was hospitalized.,1
"An employee was working near a press machine when he turned and fell to the floor on his right side, fracturing his right hip and requiring hospitalization.",1
An employee slipped/tripped while standing up from a desk. The employee's nose struck the desk and began to bleed. The employee was hospitalized.,1
"An employee was guiding a truck when it ran over his right foot, causing an injury that required surgery.",1
"An employee was trying to deliver mail when a dog ran out of the house and chased her. She tripped in a hole in the ground, suffering a broken right knee.",1
"An employee was removing paper waste from a rewinder machine. A sharp object poked his hand, causing blood poisoning.",1
A strand of cable from prestressed concrete impaled an employee's right leg.,1
"A nurse clinician was taking care of a patient in a room. When the patient started to argue with her, she started to have chest pain.",1
"An employee was helping to walk a shoplifter back into a store. Once inside the store, the shoplifter pushed the employee to the floor. The employee suffered a skull fracture and brain bleeding.",1
"An employee tripped on an anti-fatigue mat while working a checkout line. The employee fell to the floor, suffering a hip dislocation.",1
"An employee was pulling a hose across a spiral freezer conveyor. The employee's sleeve got caught between the belt and the point where the scraper contacted the belt, causing injuries to the employee's left-hand fingers.",1
"While taking equipment off a trailer, an employee noticed a hydraulic leak. He was under a directional boring drill, trying to stop the leak, when hydraulic fluid spilled out and the drill lowered onto his chest. He suffered a chest contusion and a lack of oxygen.",1
"An employee was operating a press machine. Aluminum plugged the die; the press continued, pushing the aluminum. The pressure caused the metal to shoot out of the press, smashing the employee's left hand between the aluminum and a run-out table. The employee suffered an amputation to the index finger.",0
"A temporary employee from QPS Employment Group was working with another employee to set up a hydraulic press. The press would not cycle. While the second employee was away and the first employee was cleaning up the area around the press, the press activated and amputated the employee's finger.",0
"An employee was working in a deli. As the employee stepped around a table, an electric cord caught the employee's foot and the employee tripped, suffering a broken hip.",1
"An employee was bent down to pick up a hard hat when a vehicle entered the work zone and hit him, breaking bones.",1
"An employee slipped on ice and fell to the concrete, suffering a broken femur/hip. The employee was hospitalized.",1
An employee was cutting pork loin with a meat saw. The blade cut the employee's right index and middle fingers.,1
"An employee was opening the door to a closet. As she tried to prop the door open, it shut on her right hand. Her little finger was amputated at the first knuckle.",0
"While clocking in to work, the injured employee was attacked by another employee using a knife. The injured employee sustained multiple stab wounds.",1
"An employee was riding as a passenger in a baggage tug at an airport. A second tug struck the employee's tug, breaking the employee's right foot. The employee was hospitalized.",1
"An employee was in a staging area, moving a pallet using a stand-up forklift. The forklift began to tilt forward and the employee fell off it; the pallet then fell off of the forklift and the forklift came back down, landing on the employee's legs. The employee was hospitalized, undergoing surgery to remove a blood clot.",1
"An employee was training another employee on a projection welder. He was adjusting a piece in the equipment when the equipment cycled, its top piece catching the employee's left index finger. The fingertip was amputated.",0
"An employee was locking up the building to leave work for the day. As he was exiting the building, he tripped on floor mats at the door that had become bunched up. He fell towards the loading dock and dock stairs. He reached out to grab the stair hand rail but broke his wrist and fell off the dock to the concrete driveway, landing on and fracturing his hip.",1
"An employee was walking a rolling rack of apparel merchandise to the freight elevator. The rolling rack fell over and the employee fell with it. During the fall, she sustained a laceration to the lip, a cracked front tooth and a broken humerus that required hospitalization and surgery.",1
"An employee was sawing a notch into a cedar board with a chainsaw. The saw bound up and, when pulled free, struck the right side of the employee's chin. He suffered a laceration all the way to the cheekbone.",1
"An employee was getting ready to mop the floor. While carrying a bucket of hot water, the employee slipped and fell. The water burned the employee's right hand and arm. The employee was hospitalized.",1
An employee was reattaching a chain guard on a packaging machine when the machine amputated the employee's index fingertip.,1
"A home inspector was inspecting a roof. As he came down a ladder, it slipped from under him and he fell onto the patio 9 feet below. He suffered broken teeth, a broken left wrist, and a broken pelvis and was hospitalized, undergoing surgery.",1
"An employee was applying winter poly to the outside of a greenhouse. The employee fell 12 feet to the ground level below, suffering head, neck, chest, and back injuries.",1
"An employee was accessing a pedestrian bridge. While approaching a ladder at the end of the bridge, the employee fell 5-8 feet onto the sloped paving, suffering a broken left ankle.",1
An employee was loading a dishwasher when they slipped on water and fractured their right ankle.,1
An employee was installing ridge racking within a facility. The employee fell about 4 feet from the racking and broke three ribs. The employee was hospitalized.,1
"On November 18, 2019, a temporary employee was walking to clock-in when he stumbled over wire covers. He sustained a fractured femur and was hospitalized.",1
"An employee was attaching a hoisting chain to an excavator bucket. The employee's finger was pinched between the chain and the load, causing an amputation.",0
An employee was clearing excess shrubbery using a chainsaw. He slipped on an uphill slope and the chainsaw cut his knee.,1
"While scanning merchandise in the back room, an employee tripped over rolling bin track rails in the floor and fell, sustaining a broken hip.",1
"An employee was driving a forklift up a ramp. One of the wheels came off the ramp causing the forklift to tip over and fall onto the employee, injuring his right foot.",1
"An employee was walking on the road toward a car. The employee tripped over a sidewalk curb, falling to the ground and suffering a broken right forearm.",1
"An employee was pulling a grocery dolly when she tripped and fell to the concrete floor, breaking her hip.",1
"An employee slipped on ice while walking to his car, falling and injuring his head.",1
"An employee was trying to remove aluminum that was stuck to an iron pin from previous work by dipping the pin in molten aluminum that was already in the mold. The pin dropped into the molten aluminum; while the employee was retrieving it using a shovel, the aluminum burned the employee's foot. The employee was hospitalized.",1
"An employee was on an 8-foot ladder, grouting a light fixture. The employee fell from the ladder to the concrete and suffered a broken wrist, bleeding in the brain, and a laceration.",1
"An employee was working on a scissor lift. The employee left the lift and stepped onto a steel beam to work on a piece of rebar. The rebar broke, causing the employee to fall with it to ground level. The employee suffered fractures to the tibia, clavicle, and the disks of the neck.",1
"While directing the operator of a backhoe, an employee was lining up the last four tubular braces with the inner short tube of the trench box wall. His gloved left hand was caught between the two tubes and his index fingertip was amputated.",1
An employee was trying to release a dock lock from a semi trailer. The employee's right hand was caught between the loading dock and the trailer. The hand was crushed and the index fingertip was amputated.,1
An employee was removing built-up debris from the chute of a walk-behind mower. The impeller smashed/crushed the top part of his left middle finger and index finger.,1
An employee walking to the break room was struck by the side mast of a forklift. The employee was hospitalized with a fractured pelvis.,1
"An employee was operating a load press machine, working on a metal casing, when the part did not eject. The machine was under pressure and expelled the part just as the employee was reaching to get the casing. The ejected part struck the employee's ring finger causing a contusion and laceration to the ring finger.",1
"An employee was threading the core on a paper winder. A nip point in the winder pinched the tip of his left middle finger, removing the skin at the tip. The bone tip was medically amputated.",1
An employee was opening a ball valve when a mechanical failure occurred and the employee was sprayed with a chemical solution resulting in chemical burns to the hands and face.,1
"Hot oil from a fryer that was being unclogged splashed onto an employee's hand and arm, causing second-degree burns.",1
"Two employees were putting two pieces of tooling together. As the two pieces were hammered together, an employee's left index finger was caught between the two pieces. The fingertip was amputated.",0
"An employee fell, striking his head on the side of a building and then on a concrete step landing area. He suffered serious face/head injuries.",1
"An employee was working on a crane drum and observed an oil leak coming from the crane causing distraction. The employee's hand was caught between the stub and the drum, causing torn tendons.",1
"At about 10:15 a.m. on November 18, 2019, an employee was cutting 2-by-4 wood material with a circular saw. The saw kicked back and the blade contacted the employee's thumb, partially amputating it.",0
"An employee was climbing a mulberry tree. The employee fell to the ground 4-5 feet below, subsequently suffering lower back pain.",1
"An employee fell from a dock plate when a truck pulled away, landing on the ground 4 feet below and suffering a broken ankle.",1
"At about 11:30 a.m. on November, 18, 2019, an employee was doing guardrail work when he got entangled in a magnetic drill. Three of his fingers were amputated and he was hospitalized.",1
"An employee was descending a flight of stairs. Two steps from the bottom, the employee fell and suffered a broken ankle.",1
An employee was operating a forklift and crushed his left leg between the forklift and a metal post as he approached the office. His lower leg was fractured.,1
"While walking into the emergency department observation unit, an employee became dizzy, passed out, and fell to the floor. The employee sustained a cut to the head.",1
"An employee was holding a tag line for a rotary head that was being lifted 300 feet into the air for installation. The tag line got hung up in the shackle. When the employee disentangled it, his right hand got caught in the tag line and pulled into the shackle. His index finger was amputated above the fingernail.",0
"An employee was working on a ridge cap near the peak of the roof when he slid off the roof landing on the ground below. He sustained fractures to the right heel, left wrist, and vertebrae.",1
"An employee was unloading six commercial doors from a box truck inside a loading dock. The doors had shifted, and when they were unstrapped they fell on him and pinned him to the inside of the truck. He suffered facial fractures and lacerations and nose injuries. He was hospitalized.",1
An employee was stocking the gift shop supplies when she stepped back and tripped over a rubber threshold. She fell to the floor and sustained a broken left wrist and a fractured pelvis.,1
"An employee was working on the re-saw machine in the pallet assembly and cutting area. While adjusting the height of the blade with his right hand, his left hand was pinched between the moving infeed conveyor belt and the feed wheel. This pushed his hand into the moving saw blade. He sustained severe lacerations to his left ring and pinky fingers resulting in surgical amputation of both fingers.",1
"An employee was working on the engine compartment of a vehicle. The employee fell 6.5 feet into the mechanics pit, suffering three broken lower-back vertebrae.",1
"An employee was standing on top of a feed truck attempting to loosen something with a pipe wrench. The pipe wrench slipped out of the employee's hand and he slipped and fell to the ground. The employee was hospitalized with fractures to an arm, hip, femur, and heel.",1
"An employee was installing a cupola at the peak of a pole barn. The employee slipped on the metal roof, slid, and landed in the basket of a scissor lift, sustaining a fractured right hip.",1
An employee was leaving the site at the end of his shift when he noticed a piece of stationary equipment (hydraulic plant) was still running. He stepped out of his truck to shut off the equipment. He was struck by a steel shim that weighs 1.38 lbs. and that fell from a height of approximately 35 feet. He sustained a head laceration and skull fracture.,1
"An employee was cutting flooring on a table saw. The employee's hand contacted the saw blade, resulting in a severe laceration to the pinky, ring finger, and middle fingers. The employee was hospitalized and had surgery.",1
"Employees were exposed to dishwasher sanitizer, a corrosive chemical. One employee was hospitalized.",1
An employee's finger was caught between a nut and a reaction arm while using an electric torque tool resulting in an amputation.,1
An employee was using a coin rolling machine when his fingertip was amputated in the conveyor.,1
An employee was working with racks of clothes. She turned and fell on her left side sustaining fractures to the left side ribs and cuts on the left arm.,1
"An employee was operating a forklift and hit a pallet of boxes. The forklift went out of control,  changed direction, and struck another employee causing a fractured ankle.",1
An employee was walking along the main corridor when she tripped and fell to the floor. The employee was hospitalized with a fractured left shoulder.,1
An employee was walking by the service desk and tripped on the anti-fatigue mat and fell to the floor. The employee sustained a displaced left knee and a fractured patella requiring hospitalization and surgery.,1
"An employee tripped and fell into a service pit, suffering fracture injuries.",1
An employee was walking into work from her car when she slipped and fell in the parking lot. She sustained a fractured tibia and fibula. The ground was slippery due to condensation.,1
An employee descending a 4-step set of stairs rolled and fractured his ankle.,1
"An employee was cutting a 6-foot by 6-foot piece of horizontal structural steel frame using a powered grinding tool. Once the cut was through, the cutting wheel/disk became lodged in the steel, causing the grinding tool to kick back and lacerate the employee's left forearm above the wrist.",1
An employee was delivering milk to a store in the airport and collapsed. The employee was hospitalized with a heart attack.,1
An employee was directing a 6-inch pipe spool during a bull rigging operation. He went to move a piece of chain out of the way when the pipe spool came down onto his right forearm. The employee was hospitalized with two fractured bones in the right forearm.,1
"Employees were moving a 35-foot utility pole using a pole truck equipped with a tension hook. When the utility pole was raised, it broke and struck the injured employee causing three broken bones in the neck and a broken left tibia.",1
An employee was moving a copper fixture weighing 117 pounds and sustained a hernia.,1
"An employee was picking up pipe. He set one end on a jack. As he was about to put the other end on another jack, the pipe fell off the first jack and his left middle and ring fingers were smashed between the second jack and the pipe. He suffered amputations to both fingers.",0
"The injured employee was spotting/escorting another employee who was driving a forklift loaded with a pallet of plywood. The plywood shifted and the injured employee moved out of the way, but tripped and fell to the ground sustaining a fractured arm.",1
An employee was manually clearing a jam at the duct bagging station when the pusher caused a partial amputation of their left index finger and fractured their left middle finger.,0
"An employee was cleaning a lamination roller with a rag. The employee's right hand and the rag were caught between the two rollers, and the hand was crushed.",1
An employee was compacting backfill around a manhole in a trench when he was struck by a truck that rolled into the trench. He sustained a broken collarbone and broken ribs.,1
An employee descending a fixed ladder fell backwards and landed on the concrete ground. The employee sustained multiple fractures to the back and neck and required three staples in the head.,1
An employee was struck by a forklift and was hospitalized for a leg injury.,1
An employee was pulling on a lifting strap while offloading a toolbox from a truck's lift. The strap broke causing the employee to fall backwards 2-3 feet. The employee impacted a vehicle lift during the fall and sustained fractured ribs and a punctured lung.,1
"An employee was working on a structure's exterior walls. While climbing from a beam onto a scaffold, the employee fell to the concrete surface below and suffered a fracture.",1
"Employees were setting up for a stress test using a 6""x6"" wooden piece of dunnage that was 8 feet long. They were using a forklift to assist in moving the dunnage and counterweights. When the forklift lowered its forks, the weight of the dunnage shifted and it went off balance. The injured employee's right middle finger was pinched between the ground and the end of the dunnage. The employee was hospitalized and his fingertip was medically amputated.",1
An employee was installing a vent chimney for a gas fireplace and fell from the roof to the ground below. The employee was hospitalized with bilateral foot fractures.,1
An employee was bent over while standing on the ground installing fence components. The employee collapsed and was hospitalized for a heart attack.,1
Two employees were using a hoist to move a cylinder from a paint truck. Employee 1 removed the hoist cylinder pin and was lowering the cylinder to the top of the transfer case. The injured employee's right hand was then caught and crushed between the hoist cylinder and the transfer case. The injured employee sustained an amputation to the right ring finger and required stitches on the middle and pinky fingers.,0
An employee sustained an electrical shock from an overhead line as he was leaving a lease road.,1
"A temporary was leaving work, walking down steps. The employee fell and suffered broken ribs.",1
"An employee was on a roof, pulling up plywood to install on the roof. The employee fell to the ground and suffered a hip injury.",1
"An employee was drilling holes in a metal tube. The drill bit snagged his left hand, causing a partial amputation of the index fingertip.",0
An employee was cleaning a machine when his foot slipped. His chin and cheekbone struck the machine and were lacerated. He was hospitalized.,1
An employee was working in a 3-foot-deep trench when the soil became loose and hit him on the right knee.,1
An employee was moving a garage door pan when it fell on his wrist. The employee was hospitalized with a laceration to an artery in their right wrist.,1
An employee was on a forklift's riding platform when it struck a guard rail. The employee suffered a broken tibia and a muscle injury to the leg.,1
"An employee was driving a golf cart. The cart and a moving tractor trailer collided and the employee suffered fractures to the sternum, the right arm, and a lower back vertebra. The employee was hospitalized.",1
An employee was driving a backhoe down a highway in a construction zone. An 18-wheeler semi truck struck the backhoe from behind; the employee suffered a broken nose (requiring emergency surgery) and a large laceration to the back of the head (requiring stitches).,1
"At 6:12 a.m. on November 20, 2019, an employee was unloading merchandise, pulling cardboard boxes of recliners to the edge of a trailer. He fell out of the trailer and his back struck the metal railing of a scissor lift. He suffered four broken ribs and a lacerated spleen.",1
"An employee was carrying empty trash bags when the bags fell out of her hand and she tripped on the bags and fell to the ground, striking her left elbow and fracturing it.",1
"An employee was going to conduct an inspection and evaluation of an air handler unit that did not sound right. His right hand was caught by moving v-belts and pulled into a large fan pulley, resulting in partial amputations to the ring and middle fingers on the right hand.",1
An employee was clearing leaves and water from a roof using a leaf blower. The employee fell from the roof to the ground and sustained a back injury.,1
"The injured employee was moving out of the way of another employee who was moving machinery. The injured employee lost their footing on shifting boards and fell from the second level to the first, sustaining injury to the back and head.",1
An employee's fingers were caught/crushed between a roller guide and a manual fence gate leading into the shipping/receiving area. The employee was hospitalized and had surgery.,1
An employee was riding the tractor (ride on mower) near a lake embankment when the tractor tipped over on a slope and injured his left ankle/foot area.,1
An employee was unchoking a cotton gin machine. The machine's saw blade caught and amputated his right hand.,1
An employee was preparing to load a part into the back of a van when the van rolled backwards and pinned the employee against axle assemblies. The employee sustained a broken left femur and knee ligament damage.,1
The tip of an employee's finger was amputated.,0
"While entering the office, an employee tripped over a wooden block that was beneath the mail tub located in the doorway of the room. He placed his hand out to break the fall and sustained injury to the left wrist and knee.",1
"An employee was operating an order picker. As he was lowering it, his right ring finger was caught between its head rest and the shelf rack, causing a partial amputation at the tip.",0
"An employee was stacking columns of boxes. The boxes became unstable and began to fall. The employee attempted to get out of the way and tripped and fell to the floor, breaking their right hip.",1
"An employee was venting steam from a manhole. The employee got tangled up with a pipe and fell to the ground, suffering a broken right leg.",1
"An employee stepped off a curb, lost their balance, and fell sustaining a broken hip.",1
An employee was trying to sit on the top level of a two-step ladder when the ladder folded up. Her finger was caught in between the steps of the ladder and she sustained an amputation to the left index finger.,0
An employee was watching a cubing machine. The employee stuck his hand into the cubing machine and the machine amputated the tip of the employee's middle finger.,0
"An employee was refilling a blast pot for sand blasting operations. When the lid of the blast pot was loosened, pressure was released and the blasting media was discharged into his face. The force also knocked him back, causing him to fall and strike his head on another blasting pot. The employee was hospitalized with abrasions to the face and eyes and injuries to his head.",1
An employee fell from a ladder.,1
An employee was working on the roof and fell approximately 10 feet from the roof to the ground. The employee sustained broken bones and a head injury.,1
"An employee fell 4 feet while washing a truck. The employee suffered a shoulder injury, a cracked rib, and a concussion and was hospitalized.",1
"An employee was operating a ground rod to set poles in an area for powerline distribution. He was raising the ground rod when his right hand was caught between the rod and the handle, resulting in an amputation of his right index finger.",0
An employee was reaching for a hoist cable over a guardrail. The employee and the guardrail fell to the ground about 25 feet below and the employee suffered broken bones.,1
"An employee had emptied a roll-off box. As the employee went to close the door of the roll-off box, he stopped to pick up a securement strap and the door blew open, trapping the employee between the door and the roll-off box. The employee sustained facial fractures, brain bleeding, ear lacerations, and contusions.",1
"Employees were working to remove and change the air swivel on the down the hole hammer (DTH) machine. They were using a 60"" pipe wrench weighing 60lbs. to loosen the drill steel by over-torqueing the pipe wrench and wedging it against the mast while rotating the drill steel in a counter direction. After some attempts, the DTH operator approached to help Employee 2. The drill then rotated and the pipe wrench contacted the right side of Employee 2's face, knocking him to the ground. The wrench then struck the DTH operator on the hard hat. Both employees were taken to the hospital. The DTH operator was released from the hospital after an evaluation. Employee 2 was hospitalized with multiple fractures to his jaw and cheek bone on the right side of the face.",1
An employee was guiding a steel structure onto anchor bolts for securement. The steel structure began to rotate and the employee grabbed the base of the structure to prevent movement. The employee's finger was pinched between the steel structure and the anchor bolts resulting in an amputation to the left middle fingertip.,0
"On November 21, 2019, in the paint kitchen, an employee was clearing oil inside a pneumatic spray pump and their fingertip became caught between the pneumatically driven pump cup and the pump body. The employee sustained a fingertip and partial nail amputation to the second finger on the right hand.",0
An employee was in a drop ceiling changing air filters. He fell 8 feet to the ground and suffered a head laceration.,1
"While walking on a sidewalk delivering mail, an employee was attacked by a dog.  The employee was hospitalized with lacerations to the right forearm.",1
"An employee was exiting the building through a door when the door's shade caught her pant leg, causing her to fall to the ground and bust her knee.",1
"A temporary employee was assisting another employee with moving a metal grate onto a wooden pallet in order to clean underneath the grate. While positioning the grate onto the pallet, the temporary employee's left middle finger was caught between the grate and the pallet resulting in amputation of the distal end of the left middle finger.",0
Maintenance employees had finished a repair on a board edger machine. When the machine was re-started an employee's arm and wrist were caught between a heavy metal guard that measures board thickness and a conveyor belt. The employee was hospitalized with a broken arm and required surgery to reduce swelling.,1
"An employee was doing preventative maintenance on a pelletizing mill. The equipment grabbed his left glove and broke his index, ring, and little fingers. The tip of his little finger was also severely damaged.",1
"An employee stepped off a curb and sustained fractures to both feet, requiring hospitalization.",1
"On 11/21/2019, employees were securing the crawler crane's boom and the headache ball to the barge so they could transfer the crane to another work location. When the crane operator lowered the boom, the line that held the headache ball 30 feet up in the air released and the headache ball fell. It bounced on the deck of the barge and struck the injured employee who was assisting in securing the lines to the barge. The employee's right toe was crushed and later amputated.",1
"On November 21, 2019, an employee was mounting a center-ride double pallet jack. The pallet jack moved in reverse and the employee's leg was crushed between the pallet jack and a safety post. The employee's leg sustained internal damage that required surgery.",1
"An employee was removing boards from a scaffold. While the employee was pulling a nail from a board with a hammer, the nail flew off and struck the employee between his nose and right eye, becoming embedded in his skin. He was hospitalized.",1
"While turning, a bus swung and its side pinned an employee against a wall. The employee's ribs and neck were injured.",1
"On November 21, 2019, at 7:30 AM, employees were installing underground wire and conduit. An employee who had just been fired returned to the job site and assaulted the injured employee, stabbing him in the neck with a knife. The injured employee was hospitalized and had surgery.",1
An employee was walking along side a pallet jack in a frozen food aisle when he was caught between the pallet jack and a metal racking system. The employee sustained a hip fracture requiring hospitalization and surgery.,1
A temporary employee was processing lobster bodies when their finger was caught in a conveyor. The finger was partially amputated.,1
An employee was doing maintenance work on a cement truck. The trailer rolled backwards and the employee was caught and injured between the axle and the ground.,1
An employee was assisting in cutting plastic off of round cotton bales when the employee was caught between a powered industrial truck and a loading skid. The employee's pelvis was crushed.,1
An employee was using a saw. The saw cut off the top of his right thumb.,0
An employee was replacing the front plate of a mechanical barrier when the barrier dropped down onto his arm. The employee's middle finger was amputated and the ring finger was partially amputated.,1
"An employee was performing rigging operations when a headache ball (overhaul hook ball) became caught on an I-beam. When the employee freed the headache ball, it made contact with the employee's left foot. The steel toe on the employee's boot pressed down on the big toe, requiring stitches and hospitalization.",1
"An employee was heating oil with a hot oiler on frac tanks when a fire started. The employee was hospitalized with second degree burns on the face, hands, and back.",1
A Fastklean employee was cleaning up spilled milk at a distribution center and was struck by an electric pallet jack operated by a distribution center employee. The Fastklean employee suffered fractured hips and was hospitalized for surgery.,1
"An employee was making an adjustment to the welding arm of a stationary spot welding machine when her right index finger was smashed on the up-stroke, causing a partial amputation of the fingertip.",0
An employee was hospitalized with a suspected spider bite on his right lower extremity.,1
An employee was taking inventory in the warehouse when she lifted a bucket of bolts and sustained a back injury.,1
"An employee was reworking a part on a lathe. The tool grabbed the part and ejected it through the closed main operating door. The door pushed the employee to the floor as it flew off, and the employee suffered injuries to the hip, back, neck, and head.",1
An employee was using a shear to cut thin pieces of metal. The shear activated while his right hand was at the cutting area and the tip of his right middle finger was amputated. The shear was unguarded at the time.,0
"The injured employee was spotting for a dump truck while it backed up to dump crushed stone near an approximately 76-inch deep excavation. While signaling the dump truck, the injured employee lost his footing and fell into the open hole, landing upright, and sustaining a fractured right ankle.",1
An employee was slicing meat and suffered a partial amputation to the right middle finger.,0
An employee was struck in the head by a piece of falling scrap metal.,1
An employee was using a knife to remove banding around oriented strand board product that he had delivered to a construction site. The knife slipped and caused a laceration to a patellar tendon that required hospitalization and surgery.,1
"At about 1:00 a.m. on November 22, 2019, a cheese cuber operator was trying to clear cheese particles from a photo eye. The machine cycled and amputated the operator's right middle fingertip.",0
"On November 22, 2019, an employee fell while walking down a flight of stairs, suffering a bruised knee and neck and back injuries. The employee was hospitalized.",1
"An employee was riding in the passenger side of a buggy. The buggy turned and the employee was ejected, landing on the airport tarmac and suffering head trauma. The employee was hospitalized.",1
"An employee was reading a meter on a residential property. A dog chased him, and he broke his leg while jumping over a ditch.",1
"An employee was walking from a parking lot to a walkway. The employee slipped on the icy curb/walkway and fell to the ground, suffering a broken fibula and left elbow.",1
An employee was climbing an extension ladder set up on a slope to install a surveillance camera when the bottom of the ladder slid out and the employee fell to the ground approximately 10 feet below. The employee sustained a fractured left ankle requiring surgery.,1
"An employee was operating a shredder truck. The machine jammed, and as the employee tried to unjam it the employee's foot was caught in the shredder. Four of the employee's toes were later amputated.",1
"An employee was adjusting the forks on a forklift to move items in the shop. While holding a fork up and trying to slide it, the fork slipped out of his hand and his hand was caught between the fork and the carriage. The employee's hand was smashed.",1
"Two employees were operating a metal shearing machine. It jammed and, while one of the employees was helping free the material, the shear blade came down on the tip of her left thumb. The thumb tip was amputated. The machine was guarded at the time.",0
"An employee was in the break room when she fell, striking her head on a metal rack as she fell to the floor. She was hospitalized with a laceration over the left eye and a fractured cervical vertebra.",1
"While working on the slitter machine, an employee was moving a piece of plastic and his left index and middle fingers contacted the slitter blades resulting in two fingertip amputations.",0
An employee was walking into work when she tripped on stones in the parking lot. She fell to the ground and sustained abrasions to the face and right knee as well as a fractured right shoulder which required surgery.,1
"An employee was putting a piece of heavy equipment into a storage rack. The employee's left little finger was pinched between the equipment and the cradle, and a depositor valve severed the fingertip.",0
"An employee was working around a labeler machine, performing housekeeping tasks when he observed a jam. When the employee attempted to clear the jam, their left middle fingertip was amputated.",1
The injured employee was helping a co-worker unpack a front load washer in the main drive aisle between appliances and plumbing. The injured employee went to step backwards and tripped. He fell backwards and landed flat on his back and his head struck the floor. He sustained a suspected brain bleed and concussion.,1
"An aluminum extrusion run had just finished, and two employees were using a die separator machine to separate the molds and tools from the die. As one of the employees started the machine, a hydraulic line on it blew apart at a fitting. The line, with the fitting on the end, struck one of the employees on the right shin. The employee was hospitalized for surgery on his leg.",1
"An employee was telling two temporary employees that they had been fired. One of the temporary employees punched him in the face, causing him to fall back onto the floor. He suffered soreness in his chest, as well as a gash in the back of his head that required staples to close. He was hospitalized.",1
An employee was using sand paper to manually finish a part on a lathe. The employee's glove got caught on the spinning lathe and pulled his arm into the lathe. The employee was hospitalized for an injury to his right hand and lower forearm.,1
An employee was lifting a bag off a belt in the bag room. The employee fell to the ground due to the weight of the bag and sustained a hip fracture.,1
"An employee was cutting tripe on a vertical bandsaw. The sawblade caught his little finger, amputating the tip.",0
"An employee was training a customer on the use of a skid steer with an attachment. The side window of the skid steer was frozen shut and the employee was positioned between the skid steer and the front attachment. While the customer was operating the skid steer, it lurched, and the employee fell onto the blades of the attachment sustaining broken ribs and a collapsed lung.",1
An employee was driving a stand-up reach truck when it struck shelving and he was caught between the reach truck and a fixed shelving unit. The employee sustained a pelvic injury and a hernia.,1
"On November 22, 2019, an employee was walking to their next jobsite with a maintenance cart. A forklift struck the maintenance cart which then struck the employee. The employee fell to the concrete floor and sustained a broken right hip.",1
An employee was holding an apparatus designed to help pull a piece of equipment when his thumb was caught and crushed. The employee sustained an amputation to the nailbed of the left thumb.,1
"An employee was filling a missing cell into a carrier, which involved opening a door while a conveyor was running. The sleeve of the employee's smock was caught in the sprocket that moved the conveyor; the employee's arm was pulled into and through the sprocket, and the employee was trapped in the machine. She was hospitalized.",1
"An employee had unloaded the table of the surface grinder. The grinder was in the stop position as the employee used a hose and a rag to wipe the table for cleaning purposes. The employee's left hand went under the grinder's wheel. The employee sustained amputations to her left middle fingertip, and index finger.",0
An employee was exiting a yard truck when their foot became wedged between the frame and the catwalk of the equipment and he fell to the ground. The employee sustained a leg injury and was hospitalized.,1
"Employees were removing a tarp from blades using a powered industrial truck. While the powered industrial truck was working on the opposite side of the blades, the forks contacted the injured employee's left middle finger, resulting in an amputation of the first digit.",0
"On November 22, 2019, an employee was placing lids on wooden boxes filled with cheese then affixing straps to the boxes for shipping. A wooden box being fed into the conveyor struck a door that had swung open. The wooden box then kicked back towards the tipping mechanism and the employee's right thumb was caught and partially amputated between the wooden box and the rail of the tipping mechanism.",0
An employee was using a hammer to strike equipment numbers onto buckets. The hammer head separated from the hammer and struck the employee's left ring finger. The finger was amputated.,0
"An employee was carrying a roll of shrink wrap. The employee tripped over a pallet and fell, the roll crushing the employee's left little finger against the floor. The employee's fingertip was amputated.",0
"An employee was troubleshooting a bailer leg cutout separator. The employee lost balance and the employee's left hand slipped into the separator resulting in a laceration to the thumb. The employee was hospitalized, requiring surgery.",1
An employee was assisting in loading cargo onto a flatbed truck. The employee held a piece of 4x4 wood while a forklift driver pushed the wood in order to center some cargo. The employee's right middle finger was caught and fractured between the wood and the cargo.,1
"An employee was rolling out a trash can to the side of the road when he fell while holding onto the handle of the trash can. His right middle finger was pinched between the handle and asphalt surface, resulting in a partial middle finger amputation.",0
"Onboard an aircraft carrier, a rigger helper was steadying a pipe in a compartment while pipefitters adjusted the pipe in another compartment. While adjusting the pipe, the light end of the pipe shifted upwards and the rigger helper’s left little and ring fingers were caught between the pipe flange and the overhead. The tip of the pinky finger was crushed and the fingernail was removed, and the ring finger sustained a 2-3” laceration. The employee was hospitalized and the pinky finger was amputated to the base of the fingernail.",0
An employee riding in the passenger side of a sanitation truck jumped out of the truck and their right foot was run over by the truck.,1
"While replacing a light pole in a parking lot, an employee received an electric shock.",1
"An employee was cutting meat on a vertical band saw when the employee slipped and the bandsaw blade cut the right index finger, resulting in an amputation.",0
An employee was using a metal press to form metal parts. The employee's right middle fingertip was amputated.,1
An employee observing the bridge conveyor on the corrugator machine was struck by a powered industrial clamp truck. The employee sustained a broken right ankle and foot and a laceration on the right leg.,1
"An employee was mounting a tire when his finger was caught, causing an amputation.",1
"While working on a saltwater disposal system, an employee was checking the rotation of a pump and noticed the oil tank was bulging at the bottom. The employee ran to get away from it when a flash fire erupted. The employee sustained second degree burns to the face, lower back, and both hands.",1
An employee was clearing a material jam at the slitter machine and amputated a finger on the right hand.,0
"An employee was transferring sodium hydroxide solution from a bulk liquid tank. An external valve failed and the solution sprayed onto the employee, causing a chemical burn.",1
"An employee was trimming trees when a branch that he cut rotated back into the ladder causing him to fall off the ladder. He sustained a broken arm, a dislocated shoulder, and a fractured wrist.",1
An employee was on top of a stock cart removing items from shelves when she lost her balance and fell to the floor on her right side resulting in a fractured femur that required surgery.,1
"An employee was walking with a steel pipe. The employee tripped over a portable bandsaw and fell; the sharp end of the pipe struck the employee's hand, amputating about 3/4 inch of the right little finger.",0
An employee sustained a right thumb amputation while operating a mechanical power press.,0
"An employee was pushing carts into an indoor cart corral. The employee tripped on a piece of metal and fell, suffering a nose bleed, broken right shoulder, and broken right upper arm. The employee was hospitalized.",1
An employee was slicing salami and suffered a partial finger amputation.,0
An employee was putting money and stamps in a safe when the safe door closed on their thumb and amputated the tip.,0
A maintenance employee was filling a container on wheels with scalding hot water for cleaning behind kitchen equipment and was struck by the scalding hot water. The employee sustained third degree burns on both feet and ankles.,1
"An employee tripped on non-slip mats and fell, breaking her hip.",1
Employees had replaced old poles with new ones and then went back to the yard to take the old poles off the truck using tongs. The tongs shredded a pole and part of the pole bounced up striking an employee in the stomach. The employee was hospitalized with internal bleeding due to a lacerated liver.,1
"A range safety officer was observing a customer at a shooting range who was shooting a handgun when a hot shell casing flew down the customer's shirt, startling her. She stepped back from the firing line, turned towards the range safety officer, squeezed the trigger, and unintentionally shot the range safety officer in the leg. The right leg of the range safety officer was amputated.",1
An employee was attaching a tow bar to an aircraft when he noticed it was not lined up properly. He stopped the tug and exited the tug to tend to the tow bar. The tug then lurched forward pinning the employee between the tow bar and the hatch to the front landing gear. The employee sustained a fractured left forearm and a fractured sternum.,1
An employee was assisting the sawyers with putting the de-bark machine back into service by placing a pin back into the center ring. The center ring of the de-bark machine caused a partial amputation of the employee's left middle finger.,0
An employee was pulling an online grocery cart when they felt pain in the abdomen. The employee sustained a muscle strain.,1
"An employee tripped over a rock and fell to the ground with another employee, who landed on top of him. He suffered a broken femur and was hospitalized.",1
An employee was adjusting a dock plate at a loading dock. His finger was caught and lacerated between the plate and the dock. He was hospitalized.,1
"An employee was attaching a steel cable for rigging a steel beam when the steel cable slid, pinching and amputating the thumb at the first joint.",1
An employee was walking through the office and fell sustaining a broken ankle.,1
"An employee was 4 to 6 feet up a ladder, placing a lock on a closed valve during a lockout/tagout process. The employee fell from the ladder to the floor, suffering fractures to the right wrist, right pelvis, and nose, and was hospitalized.",1
"An employee was operating a stand-up forklift when the paddle of a second forklift struck his left leg, breaking it.",1
An employee was doing maintenance work on an air cylinder that operates a jaw bagger when their finger was pinched by the air cylinder. The employee sustained an amputation to the left distal fingertip without bone loss.,0
"An employee was unloading a trailer when her shoelaces were caught in a conveyor wheel, causing her to trip and fall on her right knee. The knee was fractured and required surgery.",1
An employee troubleshooting an LED light fixture lost their balance while plugging in the light fixture and fell from a height to the floor below.,1
"While climbing down from the roof on a 24-foot extension ladder, an employee's foot was caught, and the employee fell off the ladder. The employee sustained a broken right tibia.",1
"An employee was connecting a nitrogen hose to a main line. The gasket inside the hose fell out. While the employee was trying to close the valve on the process side, PTBP crude sprayed the employee, causing second-degree burns to the neck and the hand.",1
"An employee had finished his break. He then mounted a horse and was leaving the horse barn area. The horse began to buck and threw the employee to the ground. The employee sustained a separated shoulder, a left-side subdural hematoma, and a temporal fracture.",1
An employee was helping a mechanic diagnose a problem with an airlock. The mechanic had the airlock open to access the fan that was inside. The employee attempted to clear cocoa powder that was stuck in the port with his finger. The running airlock fan propeller then amputated his right index fingertip.,1
The injured employee was shrink wrapping a pallet of product when their foot was run over by an electric pallet jack operated by another employee. The injured employee sustained a crushing injury to the left foot.,1
An employee was painting storage tanks using an 8-foot ladder. He fell from the ladder to the concrete floor and sustained broken ribs.,1
"An employee was working at a table saw. When he fed a board through the saw, the blade amputated multiple fingers.",1
An employee was pushing a truss on rollers. A chain on the motor caught the employee's glove and amputated the employee's right middle fingertip.,0
"An employee was cleaning paddles on a concrete mixer. His foot slipped into the mixer, coming into contact with the blades; three toes were amputated.",1
"An employee was standing next to the forks of his industrial truck. Another industrial truck pushed the forks into the employee's lower leg, causing a broken ankle that required surgery.",1
"An employee was removing an 8"" cap from the air tested 8"" main when the cap blew off and struck him. The employee sustained a bruised shoulder and fractures to the jaw/teeth.",1
"An employee was moving scaffold planks during a dismantling process. The employee stepped on an unsupported plank and fell about 20 feet to the floor below, suffering a torso laceration.",1
"An employee was using an overhead crane to move a 5,500-lbs. part. The magnet slipped, causing the part to drop onto the machine and amputate the employee's right index, middle, and ring fingertips.",0
"An employee was cutting up a piece of equipment for removal. The employee cut a chain and then threw it over a de-energized sprocket. The counter weight yanked the chain and his fingers into the sprocket assembly, pinching the tips of his fingers. The pinky and ring fingertips on the right hand were amputated and further surgery was required on the middle finger.",0
"An employee was bending over, adjacent to a garbage truck, to pick up a piece of cardboard. The employee was struck by the truck. He then fell onto his back and the front right tire of the truck ran over his right hand, wrist, and forearm resulting in lacerations, contusions and a degloving injury.",1
"An employee was on a scaffold finishing drywall on an interior soffit when the employee fell off the scaffold onto a concrete floor. The employee was hospitalized with broken ribs, a broken wrist, and a punctured lung.",1
An employee experienced respiratory issues due to carbon monoxide exposure while operating a grinding machine.,1
"An employee was standing at her work station, folding towels, and passed out. The employee fell to the floor, hitting her head. The employee was hospitalized with a laceration to the head.",1
An employee in the battery room changed a battery on a walk-behind powered pallet jack. As the employee was exiting the battery room his thumb was caught and smashed between the pallet jack and a concrete bollard. The employee sustained a partial thumb amputation.,0
An employee was using a knife to cut onions and amputated the tip of his left thumb.,1
An employee was using a plasma torch to cut metal off an excavator bucket. The heat created a fire that ignited his clothes. The employee sustained second degree burns to the left side of the torso.,1
An employee was on a wooden step stool taking banners and streamers down from the locker room ceiling. The employee fell backwards off the step stool and was injured.,1
An employee was preparing a piece of material to slice on a slicer machine when the blade of the slicer amputated the index and middle fingers on the right hand.,1
"An employee was helping the knuckle boom operator to unjam a log on the conveyor. The employee attempted to rig a chain around to the log and back to the knuckle boom, but the chain did not reach the knuckle boom. When the knuckle boom operator made a minor adjustment to the boom, the grappler attachment swayed on its swivel joint and pinned the employee's right ring finger against the conveyor's side wall. The fingertip was crushed and surgically amputated to the second knuckle.",0
"An employee was driving an electric pallet jack. The employee's left leg was pinned between the jack and a rack during a turn, and the rack cut the employee's upper thigh. The employee was hospitalized.",1
An operator was lowering a poly pipe into the bell hole for a poly fuse tie-in. The injured employee was in the hole receiving the pipe when the pipe shifted and crushed his hand against the poly machine. The employee's right thumb and right index finger were crushed. The thumb nail and part of the thumb were removed. The index finger was degloved and later amputated at the hospital.,0
"On 11/25/19, an employee was walking to her car when she tripped over a parking block and fell in the company parking lot, fracturing her right kneecap and requiring hospitalization.",1
An employee was using a knife to cut the plastic banding on a pile of lumber when the knife slipped and lacerated his leg just above the knee. He was hospitalized and required surgery.,1
"The injured employee was working on a split sizing line, placing pieces of chicken breast onto the conveyor belt. At the same time, other employees were next to her restacking a pellet of 70-pound totes. Three totes then fell off the pallet and struck the injured employee's back. The impact caused her to fall down. She suffered lower back and neck injuries.",1
"An employee was branding a tire. A piece of rubber came away from the tire and remained on the branding iron. When the employee flung the burning piece of rubber onto the floor, it caught rags on the floor on fire and the employee suffered burns to the left lower leg.",1
"An employee was working at her computer workstation. She tripped on a 6-inch step, hitting her knees on a grated platform. She suffered a broken right knee and was hospitalized.",1
An employee was climbing a ladder to install electrical connections at a new residential building. The ladder slipped and the employee fell about 10 feet onto a stack of bricks. The employee suffered cracked ribs and a fractured skull.,1
"While cleaning a centrifuge, an employee dropped a tool into the machine. The machine then grabbed the employee's glove and amputated their right index finger.",0
"An employee went to the roof to repair a belt on a fan. The fan was turned off but was not completely done rotating at the time. The employee was trying to manually slow the fan when the moving belt pulled his hand inside the belt and rotated it through the pulley system, where it pinched off his left index fingertip.",1
"At around 1:20 p.m. on November 26, 2019, an employee was pulling an empty cardboard box out from a combo dumper by the plastic tie binding. The binding broke, causing him to fall forward onto the concrete floor and suffer a broken right femur. He was hospitalized.",1
An employee was pulling a ladder cart full of dairy overstock back to the walk-in cooler when their finger was caught between the cart and a door handle resulting in a partial amputation.,0
"An employee was carrying a box down the stairs on a boat. He slipped and fell down the stairs, breaking his leg.",1
"On November 26, 2019, an employee was maneuvering a platform lift truck through a doorway. His head became caught between the truck and the door frame. He suffered damage to the mouth and jaw that required oral surgery.",1
"An employee was working on a building's third floor, installing floor trusses. As he stepped out onto a balcony framing member, the board broke and he fell about 30 feet to the ground below. He suffered a dislocated shoulder and bruised ribs.",1
"An employee had been using a ladder to repair a light fixture. While coming down the ladder, he fell at the last step and broke his left leg.",1
"An employee was using a crane to lift chains when the crane's hook got tangled. The crane's cable snapped and hit the employee in the lower back, causing a bruised liver, three fractured ribs, and a lumbar fracture.",1
An employee was reaching to operate a lever on a hopper that had been raised by a forklift. The hopper shifted and pinched the employee's left ring finger against the forklift fork. The end of the finger was amputated.,0
"At 3:24 p.m. on November 26, 2019, an employee was helping customers in the front end of a store when she lost her balance and fell to the floor, breaking her hip, She was hospitalized, undergoing surgery.",1
"An employee was closing a terminal box's access hatch. The hatch caught, then closed suddenly, pinching his left middle finger. The fingertip was amputated.",0
An employee was adjusting a conveyor belt using a wrench. The wrench slipped and the employee's right thumb was caught and lacerated between the belt and the pulley.,1
"An employee was tying down tarps on a truck. While moving from the truck bed to a catwalk, he slipped and fell to the ground, injuring his leg.",1
"An employee was working in a manlift to push something when the employee slipped and fell over a railing, falling 14 feet to the ground below. The employee suffered a broken arm and cracked ribs.",1
An employee sustained a right ring fingertip amputation while testing a flow mixed fan assembly.,0
"An employee was cleaning a slide plate on a concrete funnel. The slide plate moved, striking the employee and breaking the employee's ribs.",1
"While sitting in his truck taking a break, an employee felt chest pains. He was hospitalized with a collapsed lung believed to be the result of cranking the landing gear on the trailer.",1
An employee's hand slipped while cutting 2x4s with a table saw. The sleeve of the employee's jacket was caught by the blade and their hand was pulled into the blade resulting in amputation of two fingers.,0
"An employee was walking in a parking lot. The employee slipped on ice and fell to the ground, suffering a broken hip.",1
A sloth bit an employee at an amusement park. The wound became infected and she was hospitalized.,1
An employee was walking through the plant. He stopped and turned to talk to a co-worker when his left knee gave out and he fell to the floor. The employee's left femur was fractured.,1
"The injured employee used a step ladder to climb on top of a mold. Another employee was on the step ladder assisting him and handing him tools as needed. The injured employee was startled and fell approximately 7 feet from the mold to the concrete floor, sustaining head and back injuries.",1
An employee was using steel wool to clean a high-speed patcher. It grabbed his right hand and crushed it; he was hospitalized and a finger was medically amputated.,1
"An outrigger on a boom truck broke. The truck tilted and the boom hit an employee, who lost consciousness and suffered a head injury, back injury, and broken ribs. The employee was hospitalized.",1
"An employee was exiting a supply room carrying a load. The employee tripped over a pallet and fell to the floor, suffering a broken femur.",1
"While setting up decorations, an employee fell from a chair, landing on the ground and incurring a compression fracture to the back. The employee was hospitalized.",1
"An employee was drilling a hole in a wall. When the drill came through the wall, it struck his index finger and amputated the tip.",0
An employee was cutting aluminum sheet metal on a notcher machine. The blade amputated the tip of his left little finger.,0
"An employee was on a platform with a removable railing (designed to allow forklifts to bring down pallets with boxes of product). As the employee put the last box on the pallet closest to the edge, he fell off the platform, landing on the concrete floor 11.5 feet below and fracturing a heel.",1
"An employee was using a saw to cut a pipe when the saw slipped and cut his right knee, requiring hospitalization.",1
An employee was using a circular trim saw to cut material down to size. The saw amputated the employee's left middle finger.,0
An employee was troubleshooting an air-actuated spray booth damper when he sustained an amputation to his right thumb at the first knuckle.,0
An employee was preparing to cut a 2-by-4 with a power saw. The saw caught the employee's glove and amputated the tip of the employee's left index finger.,0
"An employee fell about 6 feet from an extension ladder, landing on the ground and suffering broken ribs and a broken hip.",1
An employee was transferring 6x6 timber from a roll case in a planar mill when the timber slipped and pinched the employee's right ring finger between it and the roll case guard. The employee suffered a right ring fingertip amputation.,0
"An employee was preparing food in a kitchen. Her left foot was caught under a food cart and she fell, the cart landing on her. She suffered a broken hip and was hospitalized, required surgery.",1
"An employee was running a ripsaw and doing minor maintenance. The shaving bin caught fire. When it was opened, the shavings dropped out and burned the employee's forearms. He was hospitalized.",1
An employee working at her desk fell and sustained a possible broken hip.,1
An employee slipped and fell off the dock while closing a garage door. The employee sustained a  skull fracture.,1
"A driver pulled a truck away from the loading dock and then climbed up on the bumper to pull down the roll-up door. The driver slipped from the bumper and fell approximately 4 feet, striking his head resulting in a skull fracture.",1
An employee was pulling two containers into a tractor trailer. The two containers rolled into one another and smashed his right thumb. The employee was hospitalized.,1
"An employee was working along a slope. The employee fell 8 to 10 feet down the sloped ledge, suffering a broken leg. He was hospitalized.",1
An employee was moving a snow plow blade from a pallet. The blade slipped and smashed the employee's left middle finger against the pallet. The end of the finger was amputated.,0
An employee was standing on a 20' extension ladder that was positioned against the roof at the rear of a single-story residential construction site. The employee was using the ladder to apply caulking to the fascia boards in preparation for painting. The ladder slipped and the employee held onto the edge of the roof and then fell to the ground. The employee suffered a fractured back.,1
"While exiting a loader that was missing a step, an employee lost balance and got his right leg tangled in the netting resulting in a fracture of the right leg.",1
"An employee was installing a pop-off valve on a vessel. A pipe wrench jaw broke, causing the employee to lose balance and fall. The employee's right leg was caught in the piping, and the tibia and the fibula were broken.",1
"An employee was changing a filter roll in a filter system using a broomstick. The employee's right arm was caught between the conveyor belt and the platen. The employee sustained an 8"" laceration and two broken bones to the right arm, resulting in medical amputation above the elbow.",1
"An employee was standing/working under the front end of a motor vehicle while attempting to raise the front end of the vehicle further using a pneumatic jack, in order to perform a front end alignment. The vehicle rolled backwards and slipped off of the jack, causing the jack to rotate and strike the employee in the neck.",1
"After delivering mail, an employee was walking back to their vehicle and was struck by a cement truck. The employee's right forearm was crushed.",1
An employee was changing paper rolls on a paper machine when the employee's right ring and middle fingers were caught and crushed in between two embossing rolls on the machine.,1
An employee was sweeping near a conveyor belt when her sweatshirt hood got snagged in a set-screw on the end of a shaft. The hood and sweatshirt wound up tightly in the shaft and caused a laceration to the employee's ear and shoulder area.,1
An employee suffered back pain while loading/unloading package cars. The employee was hospitalized.,1
"An employee was removing rubber product from a calender roll's rollers. The rollers caught the employee's arm, burning the forearm and elbow with their heat.",1
"An employee was driving a forklift to unload a stack of 15 pallets at a dock door when he struck a pole/column. The abrupt stop caused him to strike his head on the roll-over protective structure of the forklift, resulting in head and spinal injuries that required hospitalization. A seatbelt was not worn at the time of the incident.",1
An employee was delivering a package to a residential address when a masked man approached the employee and shot him in the ankle with a gun.,1
"At about 8:10 p.m., an employee was using a hydraulic press brake to form a steel part. As the steel part was re-struck, the material bent up into the front of the dies while the employee was holding it. The employee's left thumb was pinched between the die and steel part at the middle of the thumbnail, causing the amputation of the thumb tip.",0
"An employee was stocking merchandise on a store shelf from a ladder. He fell (no more than about 4 feet), striking his head on the floor. He suffered head trauma and was hospitalized, undergoing treatment to release pressure to his brain.",1
"On November 27, 2019, an employee slipped and struck their left arm on a concrete retaining wall. The employee was hospitalized for surgery on a broken arm.",1
"An employee was hoisting a bundle of pipes, and the employee's right hand was positioned on the bundle for stability. The hoist's up button was pushed, causing the employee's right middle and ring fingers to become crushed between the pipes and resulting in the amputation of both fingertips.",0
An employee was picking up trash in an aisle when a pallet jack and forklift collided. The employee sustained a fractured ankle.,1
"An employee was operating the core cutter. When the employee lowered the core cutter, the blade (18"") caught the core (7"" long). The employee's right thumb was then pulled into the blade, partially amputating the right thumb including the nail bed.",0
"An employee was riding on an electric pallet jack. The jack struck a golf cart, causing an injury to the employee's leg.",1
"An employee was conducting airport ramp service operations, assisting on an offload from a cargo pit. One of the back locks on the dolly was not fully secured; the employee was securing it when the cargo pallet conveyor severed his right index finger at the first knuckle.",0
"An employee was using a hoist to lift a bundle while standing on an elevated platform. The employee fell about 8-10 feet to the ground, breaking three ribs and a bone in the back. The employee was hospitalized.",1
"An employee was setting up a molder machine. The employee ran a small piece of the wood through the machine and the wood splintered. While the employee was clearing the splintered wood, the bottom planer head crushed his left ring finger. The finger was later amputated.",0
"An employee was on a flat, single-story roof inspecting temporary waterproofing. As the employee inspected a corner, a full sheet of plywood (spanning a section where two jack rafters had not yet been installed) shifted diagonally. The employee fell about 13 feet to the dirt below. He suffered fractured back vertebrae and was hospitalized, undergoing surgery.",1
"An employee was cutting down trim kit pieces with a mitre saw. The employee was holding the board in place when the blade came down. The board kicked back and pulled his left hand into the table, amputating his index finger (at the second knuckle) and the tips of his middle and ring fingers.",0
"On 11/28/2019, at 1:30 a.m., a temporary employee was inspecting a roller on the conveyor belt of a pattern-maker machine when his hand became wrapped in the roller. He suffered a compartment syndrome injury to the right wrist, requiring hospitalization and surgery.",1
"An employee was walking a property, ""chasing wires"" to find a controller that was not working properly with the irrigation system (sprinklers). The employee was walking down stairs when he slipped on the last step, turning on his left foot. He lost balance and stumbled, but did not fall to the ground. The employee sustained a pinched nerve in the lower spine.",1
"An employee was performing a roving fire watch duty when she went to transition through a door. While transitioning through the door, her glove became caught between the door and the door frame. The door then closed on her finger, resulting in a partial finger amputation.",0
"An employee was climbing a 32-foot extension ladder. When he was approximately 6 to 8 feet up, a 30 MPH gust of wind knocked him and the ladder down to the ground. He suffered a broken heel on the right foot and a fractured L1 lumbar spine.",1
An employee was using a power washer to perform sanitation duties when the power washer wand sprayed and lacerated three toes. The employee was hospitalized.,1
An employee was going to search for a patient's dentures inside a dumpster. She felt dizzy while bending over to start searching. She went to stand up and hit her head on the dumpster. She suffered a concussion and required hospitalization.,1
"An employee was working with portioning equipment to produce ground lamb when the employee's hand contacted the equipment's pneumatic guillotine blade, resulting in a left middle fingertip amputation.",0
"While cleaning up a room, an employee slipped and landed on her back. She sustained injury to the spinal cord and was hospitalized.",1
An employee was driving a vehicle. The vehicle hit a bump and the employee felt tingling in their legs. The employee was hospitalized and had back surgery.,1
"An employee was at the time clock, clocking out to go home, when she stepped back and tripped over three carrying trays and fell to the floor. The employee was hospitalized with three broken bones in the right foot.",1
An employee was assisting in moving a patient in their bed when she lost balance and landed on her knee. The employee sustained a fractured right knee that required surgery.,1
"An employee was changing the forks of a pallet jack from a double to a single. When he pressed the controller to move forward, the pallet jack moved in reverse. A metal cross-beam struck the employee's chest resulting in fractured ribs and a partially collapsed lung.",1
"While headed towards their car, an employee fell off a dock that was approximately 2 feet high and landed on the concrete surface below. The employee was hospitalized with fractured ribs and a punctured lung.",1
"An employee was performing machine startup. The employee went to check the torque on the rotary valve and his fingers were caught in moving parts. The employee sustained lacerations to the left index and middle fingers, and the left ring finger was amputated to the knuckle.",1
An employee slipped and fell while closing a sliding gate to the facility. The employee's knee was injured and required surgery.,1
An employee arrived at a well location to perform chemical treatment. The employee felt a pop in the back while walking on gravel and required hospitalization for back pain.,1
An employee was operating a stitcher machine when her right index finger was caught in the blades. The fingertip was amputated.,0
"An employee was moving a transferring container out from an air loader to a dolly to roll the container into a warehouse. She started to lift the lock on the dolly and was trying to secure the container to the dolly when her right hand was crushed between the dolly and the container. Her ring and middle fingers were crushed, requiring surgery.",1
"While connecting a can to the flange, an employee's finger was pinched between the can and the flange and the first digit of the left hand was amputated.",0
"A employee had just removed a granite countertop when the countertop fell on the employee's right toes, resulting in the amputation of the two middle toes.",1
"An employee was adjusting a patient in an electrically operated chair when his finger was caught in between the metal parts of the chair, resulting in a right middle fingertip amputation.",0
"On November 29, 2019 at 1:15 p.m., an employee was working in the stairway between the 3rd and 2nd floors to de-gloss a handrail. While he was repositioning himself, he lost his balance and fell down the stairs, suffering a 1-inch laceration to the top of his head.",1
"An employee had operated a meat grinder with a foot pedal. Afterwards, the pedal was not put away in the assigned spot at the machine. The employee then started cleaning tasks and tripped over the foot pedal, falling to the floor and fracturing his left knee. He was hospitalized and had surgery.",1
"An employee was walking behind a gun counter with a long gun box when he tripped and fell, fracturing his leg.",1
"An employee was climbing up a de-icing unit truck and fell approximately 28 feet. The employee struck the top of the de-icing unit truck, then the open driver's door, and then the floor. The employee was hospitalized for a ruptured spleen and liver and multiple fractures.",1
"During a project to make way for a fire sprinkler system, employees were doing demolition work. While approximately 15 feet above the concrete floor, the employees worked from a 2x12x20 plank in the rafters. The injured employee was using a leaf rake to remove insulation when the employee fell approximately 15 feet to the concrete floor below, suffering a head injury.",1
"While feeding paper into a roller, an employee's finger was caught on a bolt hole in the winder/slitter assembly band. The right index fingertip was amputated.",0
"An employee was attempting to clear material that was on fire inside a lint cleaning machine. The employee turned off the power and reached in to remove the burning material. The blade cleaning drum was still rotating and contacted the employee's hand. As a result, the employee sustained a thumb amputation and fingertip amputations to the middle and ring fingers.",1
"While an employee was troubleshooting an overheating hydraulic unit, smoke came out of an oil residue tank. The employee was hospitalized with a respiratory illness.",1
An employee pulled a cart with a Christmas tree on it to a customer's vehicle. She put the Christmas tree down to be loaded and was turning to leave when her foot was caught in the tree stand. This caused her to trip and fall onto her right side on the concrete walkway. She broke her right hip.,1
An employee was checking receipts when a customer punched him repeatedly in the face until he fell to the ground. He suffered broken facial bones.,1
"An employee was walking across a parking lot. The employee slipped on ice and fell, suffering a broken left femur.",1
"An employee was attempting to restart a boiler. When the employee opened the observation window, a flash occurred, causing first and second degree burns to the employee.",1
"An employee was pushing cotton that falls apart from the bale down on the module feeder to the gin when his left foot was caught and mashed between two rollers, causing skin to be pulled from the bottom of his foot. He was hospitalized.",1
"An employee was performing maintenance duties on a check valve when the valve failed, causing chemical to shoot out at the employee. The employee received second degree chemical burns to the face and neck.",1
An employee was operating a TUG that ran out of gas and was subsequently being pushed by another TUG/belt loader. The stairs on the TUG/belt loader struck and broke the employee's foot.,1
"An employee was placing product on a pallet when a forklift ran over his left foot, resulting in amputations to the second and third toes.",0
"An employee was transporting vehicles from one area to another when the employee slipped on ice and fell to the ground. The employee suffered a fractured right fibula, requiring surgery.",1
"An employee was cleaning a mirror in a nursing care resident's bathroom. A self-closing door closed on her little finger, cutting off the tip.",1
An employee was troubleshooting a saw and asked a coworker to shut it down. He opened a panel to check on the blade and his left hand came in contact with a moving belt and pulley. He sustained a partial amputation of the middle and index fingers (to the first joint).,0
"An employee was removing shelving from a storage rack. The employee was positioned on the shelving when the rack became unstable as screws were removed, which caused the employee to fall approximately 6 feet to the floor below. The employee suffered a fractured left wrist.",1
An employee was painting on a roof landing and fell 13 feet. The employee was hospitalized for a back injury.,1
"An employee slipped and fell on ice after exiting a vehicle, requiring hospitalization for a left hip injury.",1
"On December 2, 2019, an employee was moving tables around in the dining room when she tripped over a chair and fell to the floor, resulting in a fractured right hip and hospitalization.",1
"An employee and a coworker were handling a cutter blade when the blade cut his thumb, resulting in a possible amputation.",1
"An employee was conducting a fuel test under the hood of a vehicle when the vehicle caught on fire, causing burns to his nose, face, and right ear.",1
"An employee was moving a stack of empty pallets with an electric pallet jack in a congested area when he tripped and fell. The pallet jack then rolled over his right foot, fracturing it.",1
"An employee was observing the injection machine filling up bottles. The injection machine was moving fast, so the employee tried to make an adjustment to slow it down. The employee's finger was then caught in the pinch point area, resulting in a right middle fingertip amputation.",0
"An employee was delivering mail on his route when he slipped and fell on ice, tearing his quadriceps tendon.",1
"An employee was sweeping out the grain trailer. While climbing down a ladder on the trailer, the employee lost footing and fell to the ground, fracturing both heels.",1
"On December 2, 2019, an employee was turning the crank on the light tower to lower it to the down position when the hoist cable fell, causing the light tower to collapse onto his head and right hand. He received a laceration to the head and three broken fingers on his right hand, requiring hospitalization.",1
An employee received an amputation while installing a grate on the floor.,0
An employee was walking up to the building using the sidewalk when the employee slipped on ice. The employee was hospitalized with a fractured ankle and leg.,1
"An employee was welding a structural steel beam when his hoodie caught on fire, burning his left ribcage and back.",1
"An employee was attempting to leash a dog when it bit the employee's hands, resulting in a fingertip amputation.",0
"On 12/02/2019, at approximately 7:20 p.m., an employee was delivering mail when the employee stepped off the curb and was struck by an SUV. The employee sustained injuries to the head and ribs and was hospitalized.",1
"On 12/2, an employee slipped and fell in the parking lot following a snow storm. The employee was hospitalized the next day for broken ribs and a lung problem.",1
"An employee was acting as a spotter for a forklift operator that was moving pallets with bags of concrete. The operator hit the brakes as the exposed employee was in front of the load. Bags of concrete fell from the pallets and struck the employee, who suffered a hip fracture.",1
An employee was raking top soil when another employee drove over the injured employee's foot with an excavator truck. The injured employee suffered a broken left foot and ankle.,1
"An employee was walking on a company sidewalk when she slipped on black ice and fell, breaking her leg in two places.",1
"An employee was working at the liver harvester position when the employee's glove was caught by the conveyor line and pulled into a fixed blade, resulting in an amputation of the right index finger at the first joint.",1
"On December 2, 2019, an employee was unloading and pulling parts when the employee felt a pain in the stomach. The employee was hospitalized the next day with a hernia, requiring surgery.",1
An employee was setting up a punch press and changing a die when the press was activated via the foot pedal. The ram then came down and amputated his thumb.,0
"An employee was processing a board through the jointer to square off the board. The employee's hand slipped off of the board and went into the blade of the jointer, amputating the fingertip of the right middle finger.",0
"On December 2, 2019, an employee fell from a ladder while working on an overhead door. He broke his hip bone and was hospitalized.",1
"An employee was sweeping the floor when the employee's left hand entered a running cotton lint cleaner, receiving multiple lacerations and a middle finger amputation.",0
An employee was delivering mail on his route when he felt chest pain. The employee was hospitalized.,1
"An employee went to a truck to get a drill to fix a door. After retrieving the drill from the truck, the employee turned to close the truck door. His index fingertip was then caught and amputated between the truck door and the truck door frame.",0
An employee was shoveling snow and ice from a walkway near the warehouse and suffered a heart attack.,1
An employee was training another employee to operate the scrap metal recycling equipment when their finger was caught in the equipment and amputated.,0
An employee was lancing a line (high-pressure water cleaning) when the lance whipped out under pressure and cut the employee. The employee received a water laceration to the ribcage area.,1
"An employee was using a commercial T-post driver to drive a post when the T-post driver hit and smashed his left ring fingertip, requiring hospitalization and surgery.",1
"An employee was inspecting product when her hand was caught in a moving conveyor belt, resulting in a partial amputation of her finger/hand.",0
An employee was using a band saw when his right pointer finger entered the cutting area and was amputated by the blade.,0
"An employee was trimming flashing around a drip edge with an electric nipper while on an extendable ladder when he lost balance and fell 11 to 12 feet onto a prepped gutter on the ground. He was hospitalized with broken bones to the top of the left foot, requiring surgery.",1
"An employee was releasing a pin from a crane's rigging when the cable tightened and caught the employee's fingers between the cable and sheave. As a result, the employee sustained an amputation to the left middle finger just below the knuckle.",0
"An employee was retrieving empty boxes from a pallet. The employee unknowingly stepped into a loose section of banding on a bundle of boxes on the bottom of the pallet. When she went to walk away, she tripped and fell to the ground, breaking her hip.",1
"An employee was working in the engine room of a boat. When he stood up, he struck his head.",1
"An employee was closing the safe door in a store's cash room when the door closed on the employee's left index finger, resulting in a partial amputation of the fingertip.",1
"An employee was squatting down behind a belly dump trailer, adjusting the brakes. The inside dual tire blew up, and debris broke the employee's right arm and lacerated the employee's face.",1
"An employee was welding overhead when molten metal slag dropped onto the employee's shirt, causing it to catch fire. The employee was hospitalized with burns to the upper right torso and arm.",1
"An employee was preparing to use a ride-on blower. He pushed the flap inward and three of his fingers were caught in the fan, resulting in a middle fingertip amputation and two broken fingers.",0
An employee suffered a partial finger amputation while lifting a pallet on the sales floor.,0
"An employee was on a step stool. It moved and the employee fell 3 feet to the ground, suffering a broken left leg.",1
An employee was shoveling snow to get his work vehicle unstuck and collapsed from a heart attack.,1
An employee was replacing hydraulic oil on a lift conveyor when the lift fell on his right elbow. He was hospitalized with a broken elbow.,1
"An employee was unloading a refrigerator with a hand truck. As he was walking out of the truck, the refrigerator fell on his leg.",1
"An employee returned from a trip and parked his bus at the shop. He was walking down the steps of the coach when he fell, hit his head on the door of the coach, and landed on his back on the floor. He was hospitalized with a concussion and a back injury.",1
"An employee slipped on a snow-covered walkway and struck the curb, suffering a fractured hip and requiring surgery.",1
"On December 3, 2019, an employee was programming an overhead door remote control while on an aerial lift. The employee was reaching overhead when the employee's left index finger became caught in the drive chain of the overhead door, resulting in a partial finger amputation.",0
"While walking between buildings, an employee slipped on a patch of ice and fell. The back of the employee's head struck the ground, suffering a concussion.",1
"During a changeover, an employee was trying to move a stand, but the actuator would not move. He then tried to use a racket wrench on the top nut to get it to engage but was unsuccessful. The wrench was left on the nut. The employee found a missing key and turned the switch that allowed the system to engage. When the system engaged, the wrench hit his right arm, fracturing his right distal humerus.",1
An employee was cutting a piece of meat with a handheld knife when the knife severely lacerated his left middle finger.,1
An employee became ill and was hospitalized after being exposed to carbon monoxide while assembling parts.,1
"On 12/03/2019, at 8:30 a.m., an employee was setting floor on a second floor when he fell through to the first floor, which was concrete. The employee suffered a head injury and back injury and was hospitalized.",1
"On December 3, 2019, at 8:45 a.m., an employee was operating a drill press to drill holes in a block of material when his sweatshirt strings became wound in the spindle of the drill press, strangling him. He was found unconscious and hospitalized with short-term memory loss.",1
An employee was working in a field/harvesting when he was bitten/stung on his leg by an insect or spider. He was subsequently hospitalized with an infection.,1
"An employee was trimming a 4"" wide by 5' long board with a table saw in the back production area when he moved to the back side of the saw to advance the board through the saw and received an amputation of his left thumb tip.",0
"On December 03, 2019, a maintenance employee was working in a commercial fishing boat's engine room to install a new deck. While he was using a slide grinder to grind a piece of metal, the grinder became stuck and then kicked back, lacerating his right hand. He was hospitalized.",1
"While rigging up a trolley line, an employee fell through a missing grate on a platform and hit the ground. The employee was hospitalized.",1
"An employee was installing a gutter on a home and fell from an extension ladder. Upon striking the ground, the employee suffered a chin laceration and possible fracture to the left ankle.",1
An employee was trying to clear ice from a snowblower with a stick when the snowblower broke the employee's right middle and ring fingers and amputated the right middle fingertip. The snowblower was running at the time of the incident.,0
"An employee was attempting to remove a box that was stuck on a 
conveyor when his finger entered a hole in the belt, pinching it against the belt guide. As a result, he suffered a partial fingertip amputation of the fourth digit on his right hand.",0
"An employee was clerking and counting bundled steel pipes that had already been unloaded from a barge for a forklift to pick up and bring to a staging area. A 4x8 piece of wood used to stack the bundles broke between one of the tiers, causing the bundled pipes to roll off and pinch the employee between pipes. The employee suffered a fractured pelvis and hip, along with some internal bleeding.",1
An employee was sanitizing a neck skinner machine when the machine amputated the employee's right index finger. The machine was not locked/tagged out at the time of the incident.,0
"While clearing wildlife out of an attic, an employee was leaning on a 32' ladder when he slipped and fell to the ground, fracturing his left heel and hip.",1
"An employee pulled up to a wellsite and exited his truck. He was walking over to a control unit to restart the well when he slipped on ice, suffering a hip fracture.",1
"An employee was pulling cardboard to the back opening of a truck. There was slush that made the back of the truck slippery. The employee slipped and fell backward 4 feet from the truck to the ground, sustaining three broken ribs, a collapsed lung, and a severe head laceration. The employee was hospitalized.",1
"An employee was servicing a small water well rig and was on the deck, which is about 4 feet from the ground. He put the rig in gear and then fell. His pants became caught in the drive line, which burned his right-side upper torso. He was hospitalized with burns and lacerations.",1
"An employee parked a forklift, exited it, and was attempting to open a dock door when the spring broke on the door, causing it to come down. The employee lost balance and fell onto the parked forklift, suffering lacerations to the head, a wrist sprain, and a back injury. The employee was hospitalized and required staples.",1
"After moving his car so a plow truck could plow the area, an employee stepped out of his car and slipped on ice. He fell on his elbow, sustaining an injury that required surgery.",1
"An employee was using a lift to hold a platform for him to stand on while installing blocking on a metal building. He fell to the ground and the platform fell on top of him. He suffered multiple broken ribs, a broken back, a cracked sternum, and a head laceration.",1
"On December 4, 2019, an employee was trying to position an I-beam that was being supported by a forklift when the employee's right thumb was pinched between the forklift fork and the I-beam, resulting in a thumb tip amputation.",0
"An employee was working on the roof of a residential building when he fell to the ground, fracturing his left leg and left elbow.",1
"An employee was working on a commercial dryer. A pulley on the dryer started to rotate as the employee was holding it, causing a puncture on the employee's left hand.",1
An employee slipped and fell on acorns in a landscaped area of the parking lot. She suffered displaced tibia and fibula fractures to the right leg/ankle.,1
"An employee and a coworker were spooling up a steel cable on a winch line when the employee's hand was caught between the sheave and the cable, resulting in the surgical amputation of the right index finger and surgical repair of the third digit.",0
"An employee was dismounting from an excavator when his right foot slipped off the track. He fell to the ground, fracturing his pelvis.",1
An employee was driving a scissor lift that was elevated 8 to 10 feet on uneven ground when the scissor lift tipped over and crushed the left side of the employee. The employee suffered a broken left arm and leg.,1
An employee was working on a machine's wet end when the employee's right hand and arm were pinched between a steel bar and the machine's bull wheel.,1
An employee was putting a wheel loader cylinder in place on a piece of construction equipment when the cylinder started to roll and crushed his right index and middle fingers resulting in fingertip amputations.,1
"During construction of a log cabin kit, an employee was getting ready to put in a snap line on the second floor. He slipped and fell onto the ground, suffering a broken right hip. He was hospitalized for surgery.",1
"An employee was unchoking a gin when the employee's hand was caught in the machine, resulting in the amputation of four fingers.",1
"On December 4, 2019, an employee slipped and fell on an icy aluminum staircase while exiting a job trailer. The employee's left quadriceps was torn.",1
An employee was cutting papers with a manual paper cutter when the cutter blade cut off the tip of her left thumb.,0
"At about 6:00 p.m., an employee was leaving his truck when he slipped and fell, his left side and back striking the truck's bumper. He suffered muscle and tendon injuries and lower back pain.",1
"An employee slipped and fell while descending a flight of stairs, breaking his hip.",1
"An employee was walking down steps after delivering a package at a residence when she tripped and fell to the ground, fracturing her left foot.",1
"An employee was walking to a van in a parking lot. The employee slipped on black ice and fell to the asphalt, suffering a broken right pelvis, arm, and shoulder.",1
"An employee was struck by a UTV while walking along a road on site, dislocating the employee's left ankle and fracturing the left fibula.",1
"An employee was pulling a wheeled cart into a temporary storage area when the cart rolled into a building support. His gloved hand was caught between the support and cart, resulting in a right pinky finger amputation to the first knuckle.",1
"An employee was monitoring a 2-inch hose that was being thawed out using steam and was about to uncouple it to drain the line. When he unlatched the cam locks, built-up steam in the line released and burned the employee's face.",1
"An employee slipped and fell on a wooden ramp while exiting the external freezer. The employee was hospitalized with an injury to the right ankle or right leg, requiring surgery.",1
An employee had taken a 32-foot extension ladder apart and was using it to put up a safety platform when the employee fell with the ladder 14 feet to the ground. The employee was hospitalized with a broken leg and facial contusion.,1
An employee was conducting surveillance to make an arrest when his firearm discharged into his thigh.,1
"An employee was doing light demolition work on junction boxes and conduit using a power saw. The saw came into contact with the concrete ceiling, causing him to fall/jump from the ladder to the ground. His left tibia was broken.",1
"An employee was replacing a spindle using a hoist when the spindle slipped approximately 3 to 4 inches, pinching the employee's fingertip between the spindle and a fixed object (separator base). As a result, the employee's fingertip was partially amputated.",0
An employee slipped on ice and fell in the parking while walking to a vehicle. The employee was hospitalized with a head contusion and possible concussion.,1
An employee operating a pallet jack was struck by a forklift backing out of a trailer. The employee's right leg was broken.,1
"An employee slipped while getting off a ladder and fell on the concrete, suffering a broken right leg.",1
"An employee was attempting to clean rotating rollers with a rag when the employee's right hand and three fingers (index, middle, and ring) were crushed between the two turning rollers, resulting in the amputation of the index and middle fingers.",1
"An employee was helping to unload rolls of rubber (500 pounds each). The rolls are placed on racks and are secured with straps during delivery until it is time to unload. During the unloading, the pole attachment of a forklift could not reach high enough to get the roll. The employee was moving the rolls on the rack so they could be reached with the pole attachment when a roll fell on top of the employee's left leg, causing a fracture that required surgery.",1
"An employee was walking to a dining area when she slipped on a freshly mopped floor, injuring her left leg.",1
"When a conveyor was activated, an employee's right hand was caught between the indexing mechanism and the conveyor. Three of the employee's fingers were amputated.",0
"An employee was putting up Christmas decorations in an office. The employee was on a table when it tipped and the employee fell, striking a vent as she hit the ground. She suffered six broken ribs.",1
An employee was checking cargo for marks on the warehouse floor when a forklift struck the employee on the right leg and thigh. The employee sustained a thigh contusion.,1
"At 10:45 a.m. on December 4, 2019, an employee was hanging a piece of material. While the employee was trying to secure the material with wire to prevent it from swinging, the material shifted, pinching the tip of the employee's left middle finger between two pieces of steel. The employee suffered a laceration and amputation of the fingertip.",0
"An employee was attacked by a police dog while trying to tag it. The dog attacked her face and left arm, causing the loss of a third of the muscle mass in her arm, the loss of her lower right eyelid, and cuts all the way through her bottom lip.",1
"A forklift ran over an employee's left foot, breaking it. He was hospitalized.",1
"An employee was working on a rollout table. A piece of tube got hung up on the table, then sprung free and struck the employee's face. The employee suffered a fractured jaw, a laceration, and broken teeth.",1
"An employee was using a metal tape measurer when it contacted live electrical wires, resulting in electrical burns to the employee's hands and both sides of the body.",1
An employee was at the back of a forklift changing out a propane tank when another forklift driver backed into the employee. The employee was pinned between the two forklifts and suffered a fractured pelvis.,1
"An employee was trimming a piece of wood on a table saw. The piece kicked back and struck the employee in the chest, causing a laceration that required stitches. The employee was hospitalized.",1
"An employee was climbing down a ladder to access a work area when he tripped and fell, landing on a hot boiler casing. He suffered a burn to the left palm (requiring a graft) and minor burns to the right hand.",1
"While dusting walls and ceilings, an employee fell down a flight of stairs. The employee suffered broken vertebrae and was hospitalized.",1
"An employee was pulling a line with a take-up reel leaning against mule tape. The mule tape had a small tracer wire in it. The employee came in close proximity to the electrical line and an arc occurred, shocking the employee's left hand.",1
"An employee was welding when a spark landed on his shirt under his uniform and ignited both layers of clothing. He received first, second, and third degree burns to the upper torso, neck, and face.",1
"An employee was valeting and checked in a customer's vehicle that had been modified to accommodate the customer's physical disability. The employee went to move the vehicle from drive when it accelerated unexpectedly. Due to the modifications on the vehicle, the employee was unable to locate the brake pedal. In an attempt to avoid two vehicles and an ambulance parked on the drive, the employee swerved  but was unable to avoid the vehicles. The employee struck several vehicles before hitting a wooden/aluminum shelter and a concrete wall and finally coming to a stop. The employee sustained a knee injury and was hospitalized for surgery.",1
"On 12/05/2019, at 2:13 p.m., an employee was lighting a propane burner when the propane splashed back onto him. He suffered second degree flash burns on the right side of his arm down to his fingertips, requiring hospitalization.",1
"An employee was installing metal decking on an existing building when the employee tripped over another employee's lanyard and fell off the roof. The employee was hospitalized with a broken right leg, left wrist and ankle, and pelvis. The employee's harness was not tied off at the time of the incident.",1
"An employee suffered a hand injury and lost consciousness, falling to the floor and injuring their jaw and tongue.",1
"An employee was walking on the sidewalk outside when the employee tripped on a branch sticking out of the ground and fell, suffering a left knee injury.",1
An employee was walking in a store's meat department when she tripped on a loose tile and fell into a pole. She suffered a broken femur and was hospitalized.,1
"On December 5, 2019, an employee was observing as another employee unloaded a pallet of juice from a truck with a pallet jack. The pallet fell on his left leg, breaking it. He was hospitalized.",1
"An employee was walking down cement steps when the employee tripped and fell, hitting the stairs. The employee suffered a broken tibia and rib.",1
An employee was trilling a plexiglass test fixer when the drill press caught his glove. The press amputated his ring and little fingers.,0
An employee was struck by a light pole that was being transported by a mini excavator traveling backwards and a back hoe pushing it from the front. The employee was hospitalized with leg injuries.,1
An employee was removing a blind in a depressurized line at a refinery when a flash came out of the flange and burned his ear and wrists between his gloves and FRC sleeves.,1
An employee was trying to release the lock on an auto lift to lower a vehicle. The auto lift's locking mechanism caught two fingers on the employee's left hand. The middle finger was medically amputated above the knuckle. The ring finger was crushed but surgically repaired.,1
An employee was struck by a vehicle while crossing a road. The employee suffered head injuries and was hospitalized.,1
An employee was changing and cleaning a conveyor belt when the roller caught his arm.,1
"An employee was working on a frac tree. The tree fell, catching the employee on the leg and breaking it.",1
"On 12/5/2019, at 6:10 AM, an employee was working on a palletizing line and was attempting to untangle the drive bands on the rolling conveyor. His right middle fingertip was caught in the bands and subsequently amputated.",0
"An employee was making a jig to accommodate tube bending. The employee was holding stock near the chuck of the tube bending CNC machine while waiting for another employee to find an extension to hold the stock in the chuck, prior to actuating the clamp via a control panel. The clamp actuated, catching the employee's finger and degloving the fingertip which resulted in a medical amputation.",0
"An employee was climbing an extension ladder when the latch slipped, causing the ladder and the employee to fall approximately 10 feet to the ground. The employee was hospitalized with fractures to both legs.",1
"An employee was trying to fit up a pin with a channel on a component that was being assembled. Another employee slid the component back and caught the employee's finger between the hole and component, resulting in a left index fingertip amputation.",0
"An employee was walking down a hall to the break area when he tripped and fell to the floor, resulting in a fractured right hip.",1
An employee was entering a building when he fell to the floor and broke his left leg.,1
"At about 9:00 a.m. on December 5, 2019, an employee was climbing an oak tree. The employee was moving to a new position on the tree when he fell, landing on the ground about 20-25 feet below and suffering a broken lower leg. The employee was hospitalized and underwent surgery.",1
"An employee was taping a finished roll of rubber when her left hand was caught between the roll of rubber and the wind-up roller wheel. She received a crushing injury to her left hand, requiring surgery to relieve the pressure.",1
"An employee was disconnecting his cart from an order picker (PIT) when another PIT struck the employee's cart from behind. He was caught between the cart and his PIT, resulting in the amputation of his right foot.",1
"An employee was trying to clear a jam inside a machine when his right middle finger became caught, resulting in an amputation.",0
"An employee was working from a ladder, installing gas lines at a home under construction. A gust of wind blew a door open, knocking him off the ladder. He suffered a laceration above his right eye and was hospitalized.",1
"An employee was on a 6-foot A-frame ladder using a screw gun to install lights in the ceiling grid when the employee fell backwards to the floor, suffering fractured vertebrae and a head injury.",1
"An employee was picking up twigs from the ground while another employee was in a tree cutting it down. A section of the tree dropped onto the head of the employee on the ground, who suffered a broken skull.",1
"An employee was running an extrusion line in the manufacturing of a hydraulic hose. In the process of finishing a run, the employee attempted to separate the hose from a reel that was attached with string. The employee's left index finger was inadvertently tangled in the string, which tightened around the employee's fingertip. As a result, the skin and nail was removed from the fingertip.",0
"An employee was inspecting a property and walking across its parking lot when she slipped on a layer of snow and ice and fell to the ground, breaking her right tibia and fibula.",1
"An employee was troubleshooting and testing the air blast in a folding machine when the employee's left hand was caught by the rollers, causing a contusion and laceration to the hand.",1
"An employee was loading materials into a skid steer bucket when he went to grab falling materials and his finger was pinched by the skid steer's grapple, resulting in a right pinky fingertip amputation.",1
An employee was helping to clear a jam on a punch press when the die caused amputations on two of the employee's fingers.,0
An employee's hand/arm was entangled in a conveyor belt. The employee was hospitalized.,1
"An employee was installing a new garage door opener. He was working from an extension ladder, which was leaning against the garage door; the door unexpectedly opened and he fell about 14 feet to the ground and landed on his buttocks. He was hospitalized.",1
"An employee was operating a stand-up forklift when he struck a column, crushing and lacerating his foot.",1
"An employee was chasing individuals on foot when the employee fell 10 feet onto gravel ground, suffering a broken jaw and nose.",1
Two employees were unclogging a drain at a building's wastewater system. One employee was using a hose plugged into a pressure washer; the hose burst and high-pressure water lacerated the other employee's index finger.,1
"An employee was moving packages from a conveyor to a baker's rack. The items fell and the employee slipped on the packages, breaking a femur. She was hospitalized.",1
"An employee was working in a trim picking aisle at a steel plant. She was performing a cycle count for a stand-up bin of ridge caps. As she counted the pieces she was leaning the ridge caps against her shoulder. Eventually, the weight of the stack of ridge caps pushed her back and she fell to the floor with the stack on top of her. She suffered an abdominal injury and was hospitalized.",1
"An employee had been cutting lumber when he bent down and used the saw table as a brace. His hand then came into contact with the saw blade, which was still de-energizing, resulting in the amputation of half of his ring finger.",0
"An employee was operating a horizontal lathe when he attempted to change the tooling on the tail stock. The moving chuck caught his tooling, causing the tooling to rotate and strike his left hand. He broke his left hand and received several lacerations on his two middle fingers that required stitches.",1
"A nurse had just completed a home visit and was walking through a parking lot to her car. She slipped on a patch of ice and fell onto her right side, suffering a broken right tibia and fibula.",1
An employee was lifting a heavy box from inside a trailer when it caused her left shoulder to pop out of place. She was hospitalized.,1
"After performing a mill changeover, an employee was adjusting the rollers. The employee's left hand was caught between the rollers and the pipe running through the mill, and the left little fingertip was amputated. The machine was unguarded at the time of the incident.",0
"An employee was wrapping yarn around a beam on a rebeamer machine when her hand was pulled forward, causing her to jump back reflexively. In the process, her right ring finger was partially amputated.",0
"A Tradesmen International employee was helping paint an electrical tower. An arc flash injured the employee, who was hospitalized.",1
An employee was identifying wires using a jumper wire when an arc flash occurred between the jumper wire and hot wire. The employee was hospitalized with burns on the right forearm and left hand.,1
"An employee was attempting to repair a vibration pad. While working on the pad, the employee was sitting on the battery box. When the employee connected two wires, the vibration pad raised up and pinched the employee's ankle, breaking it.",1
"An employee went to the wastewater area to get additional sulfuric acid for the anodizing process. While walking back to the anodizing area with a bucket of sulfuric acid, she tripped and fell. The sulfuric acid splashed on her, causing chemical burns to the wrist, neck, and legs.",1
"An employee was using a vacuum lift to move an air conditioning unit onto a pallet. The unit's metal edge cut the employee's right little finger, resulting in an amputation of the fingertip to the end of the nail.",0
"At about 2:55 p.m. on December 6, 2019, an employee was moving a steel trim staging table. The employee's left thumb tip was pinched between the table and another, stationary table. It was lacerated and subsequently amputated.",0
An employee was driving a company service truck on a rail terminal when he crashed into a parked intermodal chassis with a container attached to it. The employee's legs were crushed.,1
"An employee was standing on a rolling 10-foot aluminum ladder, removing a sign. He fell from the fourth rung to the concrete floor and broke his hip.",1
"On December 6, 2019, a truck had been backed into a parking space close to a cinderblock wall, next to a loading dock. One of its loading doors was open. An employee was standing next to the truck, waiting for the driver to pull out to give the door enough clearance from the cinderblock wall to be closed. The door began to swing back toward the cinderblock wall as the driver began to pull out. As the employee tried to keep the door from striking the wall, the employee's upper right forearm got caught between the door and the wall. The employee suffered a laceration of the right upper arm.",1
An employee was sprayed with hydrofluoric acid and suffered chemical burns.,1
An employee was drying a conveyor and loading plastic into a feed wrap. The feed roller caused a laceration on her right arm that required stitches.,1
"On December 6, 2019, an employee was reaching for a tool between a stack of guardrails when the stack of guardrails fell on the employee's finger, resulting in a partial finger amputation.",0
"An employee was helping to lift tin panels off a flatbed truck. A spreader bar fell off the tines of a forklift and struck the employee, who fell backward onto the trailer. He suffered a broken left ankle, a contusion to the back/neck, and a laceration to the head.",1
A police officer responded to an active shooter situation. He entered the building with three other base policemen and was shot in the leg by the suspect. He was hospitalized.,1
"An employee was standing on the deck of a flatbed truck trailer. He fell to the ground, suffering a dislocated elbow, a broken arm, and broken ribs.",1
"An employee was climbing a fixed ladder to access an overhead crane to perform work. The crane was still energized. When the employee touched the crane, it shocked him, causing him to fall to the ground below. He suffered a fractured back and collapsed lung.",1
An employee was pulling down the roll door on the back of a trailer after making a delivery when he suffered an abdominal hernia.,1
"An employee was standing on her desk attempting to adjust an air vent when she lost her balance and fell to the ground, fracturing her left hip and left wrist.",1
"An employee was pushing a gangway to a railcar. The gangway was extended. The extension piece fell down and struck the employee's hand, injuring it. The employee was hospitalized and underwent surgery.",1
"At 10:00 p.m. on December 6, 2019, an employee was operating a powered industrial truck when his foot was caught between the truck and a metal rack. He suffered a contusion, followed by muscle injury. He was hospitalized and underwent surgery.",1
"On December 6, 2019, a crane was landing a bundle of steel decking on the ground when it struck a 52"" steel beam that was on cribbing. The beam fell onto an employee's foot, causing a fracture that required hospitalization.",1
"An employee was banding down material on a pallet when a forklift, parked behind him, rolled into his heel. He suffered severed tendons and a broken foot.",1
An employee slipped and fell on ice while delivering propane to a customer's home. The employee suffered a concussion and was hospitalized.,1
"An employee was torqueing a bolt with an impact gun. The employee's finger was caught between the bolt and socket when the impact gun trigger was engaged, resulting in a left index fingertip amputation.",0
"An employee was cleaning up logs that were laying on the lawn after a storm. The employee used a crowbar to lever a log as a second employee used a chainsaw to cut the log into smaller pieces. The crowbar lever was dropped, and the log rolled onto the first employee's ankle and fractured it.",1
An employee was repairing a light fixture from the third step of a 6-foot ladder. He fell and suffered a back injury.,1
"A Sunshine Staffing temporary employee lifted products at a job site from 4:00 p.m. to 12:00 a.m. He became sore, stopped working, and was then hospitalized, due to a muscle injury.",1
An employee was working on a pig launching platform. A flash fire caused second-degree burns to the employee's hands.,1
"An employee was attempting to manually wipe excess lubricant off of elevator cables when the car moved, putting the injured employee's arm in the pinch point between the ropes and the sheaves. The employee was hospitalized with a severe fracture and laceration to the left arm.",1
"An employee was moving feed in the feed building. It was cold and rainy, so the employee went over to a propane heater mounted on a 30 lb. tank inside the feed building to warm up. The employee was standing near the heater when his jacket caught on fire, causing third degree burns on his back that required hospitalization.",1
"An employee was on a ladder, helping remove a window from a wall. The window started falling; he moved out the way, but was caught between the window and a forklift. He suffered broken ribs and lacerations.",1
"An employee was approaching the entrance end of a car wash when she slipped and fell on the wet surface (diamond plate), fracturing her left ankle and tibia. She was hospitalized.",1
"An employee was in a warehouse. The employee walked between two tall pallets holding product, turned and tripped on a pallet, fell, and suffered a broken hip.",1
An employee had a cardiac event which resulted in them falling over and striking their head on the floor.,1
"An employee was taking out trash. A vehicle struck him while he was in a crosswalk, and he suffered a concussion and bruises.",1
An employee was walking on an aircraft flight line when a vehicle on the flight line made an abrupt U-turn and impacted the employee. He was hospitalized with injuries to his hip and pelvis.,1
"An employee was draining natural gas condensate from a level transmitter. When a valve was opened, the escaping gas ignited. The employee suffered first- and second-degree burns to the face and neck.",1
"An employee was pulling a spud pin out of a barge's rear spud. Before he could get the spud all the way out, the spud was lowered, causing the pin to jump up and strike him on the left side of the face. He was hospitalized with a fractured orbital bone and mandible, requiring surgery.",1
An employee was exiting a vehicle when the employee slipped on the running board and fell onto the car parked next to the driver's side. The employee was hospitalized with head and neck injuries.,1
"An employee was unfolding a glue conveyor into its flat position. The conveyor flipped on its own, pinching the employee's right ring finger. The fingertip was amputated.",0
"An employee was removing electrical cables from an A-frame when an arc blast occurred, injuring one employee.",1
An employee was helping another machine operator at a finishing press. The employee was checking the die with her hand in the press when the press engaged. The die then caused partial amputations of the employee's right index and middle fingers.,0
An employee fell from a makeshift 18-inch-high stairway leading up to a 36-inch foundation. The employee landed on the ground and broke his right tibia.,1
"An employee tripped on a 4-by-4 pallet support board and fell to the concrete floor, suffering a possible leg fracture.",1
"An employee was attaching a trailer tongue to a truck hitch when his left index finger was caught between the trailer tongue and truck hitch, amputating it at the nailbed.",1
"An employee was operating an all terrain vehicle to intercept a drug smuggler when the employee struck barbed wire, suffering a throat laceration.",1
An employee was attempting to engage dolly locks when her right leg entered the pathway of the moving dollies. Her right leg was then pulled in between a dolly and a commander platform as the dollies were moving forward. She was hospitalized with bruising to the right leg.,1
"While working at a cash register, and employee became lightheaded and fell to the floor. The employee suffered a possible vertebral fracture.",1
"An employee was attempting to place a bale in a cotton bale press when his right hand was caught in the press, resulting in amputations of the right middle, ring, and pinky fingers. The press was guarded at the time of the incident.",0
An employee was power washing the shop when he was struck by a reversing forklift that ran over and broke his right leg.,1
An employee was making a routine adjustment on the slicing line of a repack machine when the machine's cross-cutting knife amputated the employee's middle and ring fingers near the first knuckle.,0
"An employee was attempting to locate the cause of a noise in the cooling fan of a piece of lab equipment. The employee was tapping the fan blade when his right index finger was caught in the blade, causing a fingertip amputation. The fan's cover was removed at the time of the incident.",0
An employee was operating and turning a motorized scooter when the scooter slipped out from under him and landed on his leg. He sustained a broken leg and ankle.,1
"An employee was sitting in a wheeled chair. The employee bent down out of the chair to pick up a piece of paper, became dizzy, and fell. The employee's head struck the floor.",1
"An employee was removing the yoke from the transmission on a commercial truck. A bolt broke and shot back into the employee's face. The employee suffered a left-side facial fracture and tearing of the orbital socket, requiring hospitalization for surgery.",1
"An employee was operating a 1,600-ton dry press machine. He was standing on the pressing platform while waiting for the press cycle to complete. He fell off the platform and his head struck the reinforced concrete floor about 2 feet below. He lost consciousness and began bleeding from the back of his head and the side of his nose. He was hospitalized.",1
"An employee was on a step stool organizing supplies when the employee fell off the stool and fractured the right hip, requiring hospitalization.",1
"An employee was walking to her car at the end of her shift. Precipitation had frozen to the ground. The employee slipped and fell, breaking their femur and requiring surgery.",1
"An employee was cutting insulation off of a cable that he thought was de-energized. However, the cable was energized, and he received third degree electrical burns to his knees and elbows and a first degree burn to his face.",1
"An employee was cleaning a bread slicer when the blade lacerated the employee's right thumb, index finger, and middle finger. The slicer was unguarded at the time of the incident.",1
An employee was trying to close the jammed back door to a postal delivery truck. His left middle finger was caught between the two panels of the door and was amputated to the first knuckle.,1
"An employee was taking wrapping off palletized boxed produce. A box of the produce fell off the top of the pallet and struck him in the chest. He fell backwards to the floor, and the box landed on him. He suffered chest and lower back injuries and was hospitalized.",1
"An employee was performing maintenance on a sand mixer machine. He loosened a metal plate on the machine, which then fell onto his left hand, crushing his left index finger and resulting in a medical finger amputation.",1
"An employee was operating a powered industrial truck (PIT) when the PIT struck a sprinkler head, creating a flood of water from overhead. The employee disembarked the PIT and slipped and fell on the wet concrete floor while attempting to exit the flooded area, suffering a serious spinal injury.",1
"An employee was exiting a package delivery vehicle. She fell, suffering a broken right wrist and a head laceration.",1
"An employee was driving a forklift across an iron pour area. A ladle containing molten iron struck the forklift; as the employee left the forklift, the employee's feet came into contact with molten iron and were burned.",1
An electrical technician was using a multimeter test for voltage across a live circuit and sustained burns from an arc flash requiring hospitalization.,1
"An employee was working at the self checkout lanes when a customer came up behind her and began punching her in the face. She suffered a broken nose, fractured left eye socket and cheek, and injured right ear.",1
"An employee was looking under the hood of a truck. The employee's hand was on the engine alternator belt when the engine was started. The employee's fingertip was then caught between the belt and pulley, resulting in an amputation.",0
"An employee was walking across the parking lot when he slipped on the icy pavement and landed on his foot, breaking his ankle.",1
An employee suffered the amputation of three left-hand fingers while operating a shear.,0
"An employee was using a full-size metal shear to cut metal. As the employee was holding the metal in place, the shear actuated and cut off the tip of the employee's right middle finger to the top of the nail bed.",1
"An employee was operating a mini-grinder. The equipment jammed; while the employee was trying to unjam it, the running paddles caught and amputated the employee's left index finger.",0
"On December 9, 2019, at 8:55 a.m., an employee was working on a PIV. The employee was tightening the hose clamp with a socket wrench when the tool slipped and the employee's left hand made contact with the PIV engine's drive belt, causing an amputation to the left pinky finger. The engine was running at the time of the incident.",0
"An employee was troubleshooting a drying problem on a pellet dryer. The employee removed the airlock hose on the bottom of the dryer and used his right pinky finger to sweep away a piece of debris. The airlock rotated and caught his leather glove. When he pulled his hand out, his right pinky fingertip was amputated.",0
"An employee was placing trash into a trash compactor. The employee tried to remove an item from the trash compactor and amputated their left middle, ring, and pinky fingers.",1
"An employee was hooking up a trailer to a pickup while a second employee was using a skid steer to remove snow around the trailer. The skid steer bucket struck the first employee, causing a compound fracture of the lower left leg below the knee and a fracture to the right wrist. The employee was hospitalized.",1
"An employee was attempting to clear jammed wire from machinery when the employee's hand entered the point of operation. The machine then cycled, resulting in a fingertip amputation.",0
"An employee was operating a press brake. As he was removing stuck material, the machine caught and partially amputated his right thumb.",0
"An employee was manually jogging a machine by pulling on the drive belt when the employee's hand was caught in the pulley, resulting in a finger amputation.",1
"An employee was using an electric saw to cut drywall. The blade hit an object, causing the saw to jump back and cut two of the employee's fingers. The employee was hospitalized, requiring surgery.",1
"An employee fell to the ground while helping another employee tarp a trailer. The employee suffered a broken wrist, broken elbow, and fractured hip.",1
"An employee was walking through a parking lot on a slight grade. The employee slipped on wet grass, fell to the ground, and suffered broken teeth. The employee was hospitalized.",1
"An employee was repairing a broken chain on a machine on a repair line when the machine was activated while his hand was on the chain, resulting in a left little finger amputation and broken left ring and middle fingers.",0
An employee suffered a partial distal tip amputation while operating a production conveyor.,0
"An employee drove a log skidder to a site to drag a log out of the woods. When he got out of the log skidder, a dead tree fell and hit him, knocking him to the ground and against part of the skidder. He suffered a broken/fractured elbow, fracture to several vertebrae, and a fractured pelvis.",1
"An employee was using a chain hoist to lift a 150-pound heat pump when an overhead anchor broke free from the cement ceiling, causing the pump to fall and strike the employee. He suffered a cervical injury.",1
"A 1-ton tow truck backed over an employee, breaking the employee's left ankle.",1
"An employee was operating a manual surface grinder and tried to move the diamond dressing tool with his right hand while the grinder wheel was running. His right index finger was caught in between the grinding wheel and the diamond dressing tool, resulting in a finger amputation.",0
"An employee was clearing a jam on a line that had caused a belt to come off a roller. The employee slipped and fell 7 feet to the cement floor below, suffering a broken vertebra.",1
"An employee was carrying equipment into a store. He fell to the floor as he entered a room, breaking his right wrist.",1
An employee received an electric shock while installing exterior lighting outside a central plant.,1
"Casing was being run at a drilling site. The employee was reaching for a safety chain on an elevator door when the casing was pushed into the employee's right arm, smashing it against the pipe and tool that was in the hole. The employee's arm was broken.",1
"The injured employee was working in the waste processing area of plant discussing tasks and duties with employee 2. The injured employee was assaulted by employee 2. The injured employee was punched while inside the plant. Then the altercation moved outside to the parking lot, where the injured employee was shot and pistol-whipped by employee 2. The injured employee sustained a gunshot wound and broken ribs.",1
An employee was walking behind a forklift when the forklift started to back up. The forklift operator did not see the employee and struck him. He suffered a fractured left tibia and broken left ankle.,1
"An employee was working on a small air press. While she was getting a part from the machine, it cut her right index finger. She suffered an amputation to the finger.",0
"An employee was trying to remove a rag from a milling machine. The employee's right hand was pulled into the machine's rotating parts, causing the amputation of the little finger, the ring finger, and half of the middle finger.",1
"A 6-foot piece of steel weighing approximately 1,300 pounds was being hoisted, when it slipped from the rigging and fell from approximately 8 feet, striking a machine and then striking an employee in the leg. The employee's leg was fractured.",1
"An employee was working at the edger when he started to fall. He reached his hand out and it contacted the edger chain and/or was caught between two boards, resulting in a left pinky finger amputation. The chain and sprocket was unguarded at the time of the incident.",1
"An employee was cutting metal on a shear. As he pushed material into the shear, the machine started. His finger was crushed and the tip was amputated.",0
An employee was clearing a jam on a machine. The rollers caught him and amputated his left thumb.,1
"An employee was adjusting the forks on a forklift when his hand was caught between the forks and the carriage, resulting in the surgical amputation of the middle finger.",0
"An employee was pulling rods from a well and placing them in a basket on a truck. A rod fell from the basket and struck him on the shoulder. He suffered a collapsed lung and broken bones in the shoulder, and was hospitalized.",1
"An employee was inspecting a butter pump and loading it with a block of butter. The employee's left-hand fingers were pinched between the top guard and the side of the pump, resulting in a partial amputation of the tips of the ring and middle fingers.",0
An employee was on top of a shot blaster pushing down metal shots from a sight glass into the auger when the auger caught the employee's hand and pulled his arm into the shot blaster. He sustained vascular damage in his arm and was hospitalized.,1
Two employees got into an argument. They went outside and the argument escalated into a fight outside the restaurant. One employee was stabbed five times and hospitalized.,1
"An employee was working on a front end loader. The locking attachment pin struck the employee's left middle finger, which was later medically amputated.",1
"An employee was getting ready to pull parts from an oven with an electric cart dolly. He was reversing the electric cart dolly in high gear toward the oven when the handle bar of the cart dolly pinned his hand against the oven door. He suffered a hand injury, requiring hospitalization and surgery.",1
"An employee was ripping wood flooring on a sliding table saw. A piece of flooring got stuck. While the employee was clearing it, the blade cut his right index middle fingers. The index finger, which had been cut at the knuckle, underwent a medical amputation; the middle finger required stitches. The blade was guarded at the time of the incident.",1
An employee fell to the ground and broke his head while unloading freight from the lift gate of a trailer.,1
"On December 10, 2019, an employee was struck by a backhoe blade while milling and paving a roadway. The employee was hospitalized and suffered an amputation.",1
"An employee was delivering product to a customer when the employee slipped and fell on ice, breaking the right hip.",1
"An employee was in a man lift changing a light bulb in a gym when a spotter lowered one of the stabilizers, causing the employee to fall 25 to 30 feet to the ground. The employee was hospitalized with facial, head, and internal organ injuries.",1
"An employee was preparing to service a car and placed it on a lift. The car fell off the lift and pinned the employee to the ground, causing contusions and possible fractures to the right side of the body. The employee was hospitalized.",1
"An employee was dropping boxes into an elevator shaft when the employee fell down the shaft and hit the shaft floor, suffering a back injury.",1
An employee fell from a 4- to 5-foot scaffold to the concrete landing below. The employee suffered a broken left femur.,1
"An employee was measuring a forklift fork. Another fork, lying next to the one the employee was measuring, was knocked over and amputated the employee's left middle fingertip and left index fingertip.",1
"An employee was helping another employee investigate the operation of a lift gate on a box truck. The second employee lowered the lift gate, but the mechanism was stuck. The second employee freed the mechanism and used the controls to lower the lift gate. The lift gate ramp then needed to be flipped over. Both employees grabbed the ramp plate to flip it over and as they were bringing the ramp plate over, it fell on the first employee's right foot. The first employee was hospitalized with four toe fractures.",1
"An employee was cutting down a tree when it fell on him, breaking his nose, back, and shoulder.",1
"An employee was walking out of the building when she slipped and fell on a slippery floor, fracturing her left hip.",1
"An employee was poling a light when a small amount of molten bath splashed on his jacket, causing it to ignite. He received burns to his left-side flank under his arm.",1
"An employee was throwing trash into a dumpster from a receiving dock when the employee slipped and fell off the dock, which was wet. The employee landed on the dumpster and received lacerations to the spleen, kidney, and left elbow; a fractured rib, and a right knee injury.",1
"At 12:55 a.m. in a highway construction work zone, a van struck the employer's pickup truck, which in turn struck two employees. One of the employees was hospitalized, having suffered two broken ribs, two broken vertebrae, and a bruised lung.",1
An employee was feeding rebar into a cutting machine. It actuated and his hand got stuck in the machine. He suffered broken bones and underwent a surgical amputation.,1
An employee was walking down a flight of stairs carrying packages from the mailroom when the employee missed the last step and fell to the hard stairwell surface. The employee was hospitalized with a ruptured quadriceps tendon.,1
"An employee was using a cut-off saw to cut a pipe when the saw became caught or kicked back and struck the employee's face, causing severe facial lacerations that required hospitalization and stitches.",1
Employees were using a skid steer to load flat rails onto a trailer. One employee's fingers were caught and crushed between a rail and the trailer.,1
"An employee was cleaning a roller conveyor when the employee's finger contacted the chain, resulting in the amputation of the left small fingertip.",0
"A maintenance employee was installing a harmonic balancer on a crank shaft on a frac pump. He was pulling himself up using a strap when the strap sheared a bolt holding some of the components together.  This caused the metal lifting eye to fall and strike the employee's hand, resulting in an amputation of the right pinky finger.",0
"An employee was cutting 2X4 lumber with a miter saw when his hand slipped and contacted the blade, lacerating his left index, middle, and ring fingers.",1
"An employee was coming into work from the parking lot when she lost her balance and fell to the ground, hitting her head. She was hospitalized with a brain bleed.",1
"An employee was working on a 5-foot ladder to remove cardboard from a shelf when the employee fell off the ladder, suffering left rib and left leg injuries that required hospitalization.",1
"An employee was cleaning up mulch spillage around a screener (electric and hydraulic) when a piece of tarp was blown into the screener.  The screener operator stopped the screener and the employee attempted to remove the tarp piece. His left hand became wrapped up in the idler roller, resulting in fractures to the hand. He was hospitalized.",1
"An employee was on the upper level of a drop-deck flatbed trailer, rigging electrical bushings so a crane could remove them from the back of the trailer. He fell from the upper level to the lower level, 3 feet below, and broke his left tibia and fibula.",1
An employee was working with another employee to unjam a fiber picker machine when the employee's left arm was pulled into the hazardous area. The employee was hospitalized with left hand and arm injuries.,1
An employee was operating a flange-refacing machine. His arm contacted a rotating part and was injured. He was hospitalized.,1
An employee was climbing down from a rough terrain crane when he lost his footing and fell to the ground. He was hospitalized with a  fracture above his left ankle.,1
"On December 11, 2019, a live-in caregiver was taking trash to a can outside a house. She tripped on the edge of a small ramp and broke her ankle. She was hospitalized, undergoing surgery.",1
"An employee was in an aerial lift helping to erect precast tilt-up concrete panels. Approximately 5 minutes after the panel's installation, workers adjusting the panel began to notice it shifting away from its structure. Immediately after noticing the shift, workers started clearing the area. Within seconds, the panel became displaced and completely fell. During the panel's descent, it struck the left side of the employee's aerial lift guardrail. The panel's strike caused the aerial lift to rebound sporadically. The rebounding motions caused the injured employee to strike the left side of his abdomen against the aerial lift's guardrails and platform. This caused him to break his fifth and sixth left-side ribs, and suffer a partially collapsed lung. He was hospitalized.",1
An employee was picking up trash when he slipped on ice in front of the store and broke his ankle.,1
"An employee had been standing in the bed of a pickup truck, shoveling salt out to de-ice walkways. After jumping down off the truck he lost consciousness and fell to the ground, striking his head on the concrete. He suffered a head injury and minor brain bleeding, and was hospitalized.",1
"An employee was rigging and lifting a load with an overhead jib crane when the load fell on the employee's hand, smashing the fifth distal phalanx and resulting in a fourth finger amputation.",0
A fabric cutter's blade amputated the tip of an employee's left middle finger.,0
"An employee was working on the loading dock when a forklift driver reversed over the employee's foot, fracturing it. The employee was hospitalized.",1
"At 7:30 p.m. on December 11, 2019, an employee was folding up the legs of a foldable table. When the hinge of a leg was released, the leg dropped forward, slicing open the employee's right eye.",1
An employee was attempting to unjam a heat sealing machine when the machine burned the employee's right hand and forearm.,1
"A patient bit the tip of an employee's finger, causing the amputation of the tip without loss of bone.",0
"An employee was walking to a moving storage box in a parking lot when she slipped on black ice and fell to the parking lot surface. She broke her lower right leg in two places and was hospitalized, requiring surgery.",1
"An employee was riding on the rear steps of a residential collection truck when a piece of debris flew in his face, causing him to either jump or fall off the rear step onto the ground. He suffered a fractured ankle, neck, and back as well as shoulder soreness.",1
"An employee was cleaning the stairs with water and bleach. The employee slipped on the wet floor, tripped and fell down the stairs from the first floor to the basement. The employee sustained a fracture requiring surgery.",1
"An employee tripped over a chair in the ICU breakroom and impacted the ground, fracturing the left hip.",1
An employee's fingertip was amputated by a closing steel door.,0
"An employee was standing in front of a standard-transmission vehicle, looking into the engine. The vehicle was started while it was in gear and its bumper pinned the employee against a concrete barrier. The employee's leg was broken.",1
"An employee arrived at work for a monthly meeting. The employee entered an auditorium where latex balloons had been left from a previous event. Upon entering the room, the employee began experiencing a severe allergic reaction to the latex and respiratory distress, requiring hospitalization.",1
"An employee was loading a cart with plywood when the plywood slid off the cart, striking the employee in the sternum. He flew 10 feet and fell to the floor, hitting his head. He was hospitalized with a head injury requiring stitches, sternum injuries, and a possible concussion.",1
"An employee was trying to flush contaminants from a chemical line. The flow came out at a higher rate than expected. Toluene di-isocyanate splashed out of the containment bucket and onto two employees. One of them, splashed in the head, face, and chest area, suffered skin irritation and the effects of chemical inhalation.",1
"On December 11, 2019, an employee was cutting wood stock with a chop saw to fabricate a window when the spinning saw blade amputated the employee's right thumb.",1
"Employees were moving a large steel vessel head piece with a forklift when the head piece was pushed off of the cribbing onto the injured employee's foot, crushing it and resulting in a small toe amputation.",1
An employee was walking on a snow-covered surface when he fell to the ground and fractured his ankle.,1
"An employee fell off a ladder he was climbing, landing on the concrete floor about 8 feet below. He suffered a cut to the back of the head, a cut to the chin, a broken shoulder, and a broken heel.",1
"An employee either fell to the floor while standing on a chair or tripped and fell to the floor while walking. The employee sustained a broken leg in two places, requiring hospitalization.",1
"An employee tripped on the corner of a pallet and fell to the floor, breaking both arms.",1
"An employee was preparing to lift a bundle of rebar with a crane when the employee's thumb became caught in the clamp of the crane's jib, resulting in a thumb amputation.",1
"An employee reached into a tray former to grab a box tab. The plunger that grabbed the boxes came down and struck his right index finger, breaking it; the finger was later amputated.",0
"An employee was climbing down a pier when he slipped and his eye contacted uncapped rebar, causing an eye contusion.",1
An employee was sitting in the cab of a forklift while fueling the lift. The fuel started to overflow so the employee exited the cab and slipped and fell 3 feet to the cement. She landed on and fractured her ankle.,1
An employee was offloading a tractor trailer. The employee's left index finger was pinched by the load and partially amputated.,1
"An employee was returning from lunch and collapsed, requiring hospitalization.",1
"On December 11, 2019, at approximately 11:00 a.m., an employee was attempting to clear a piece of wood that was lodged in a lumber finish planer when a rotating cutter head contacted the employee's right pinky finger, resulting in an amputation.",0
An employee was changing out a liquor gun for a recovery boiler when black liquor (caustic-type material) contacted the employee's face. He was hospitalized with second degree burns to the face and upper chest.,1
"An employee on a second floor was installing floor trusses into hangers. A truss pushed out of the hanger, causing the employee to fall 18 feet from the second story to the ground. The employee sustained a concussion.",1
"An employee of Andino's Landscape was working on bar countertop trim using a 7.5-inch circular saw. He was cutting a piece of trim on a balcony. The sawblade made contact with the guardrail, causing the saw to kick back and contact the employee's left index finger. The finger was amputated.",1
"An employee was installing safety railings on a new parking deck construction when he tripped and fell through an elevator shaft to the ground below (approximately 50 feet). He suffered fractures to both legs, two fractured ribs, and a major spinal compression, requiring hospitalization. Fall protection was not worn at the time of the incident.",1
"Two employees were loading a backyard machine onto a trailer for transport. When the machine was backed up, its right track slipped off the right ramp and it tipped over. It struck the employee who was acting as a spotter, causing a broken vertebra, broken ribs, and bruised lungs.",1
"On December 12, 2019, around 3:00 PM, an employee was operating a forklift inside a freezer when he pressed the gas instead of the brakes. His hand was outside of the forklift cage at the time and became caught between the forklift and a rack. He suffered a thumb fracture and ligament damage and was hospitalized where the thumb was surgically amputated.",1
"While doing a bait monitor check, an employee fell at a customer's house and struck his head on concrete. The employee sustained severe head injuries and seizures.",1
The employee was bracing a pallet with his foot so he could nail it with a nail gun. The employee slipped and the nail gun shot a nail into his foot.,1
"An employee was moving a parallel bar. The bar fell on the employee's finger, resulting in an amputation.",0
An employee tripped and fell while moving an empty shopping cart. The employee suffered broken ribs.,1
"On December 12, 2019, at approximately 5:00 PM, an employee was leaving for the day when the employee slipped in the hallway and fell. The employee refractured the right hip.",1
"An employee was placing a 425-pound turbine disk into a crate for shipment. While attempting to position the turbine disk, the employee's right middle finger was caught in between a 2x4 inside the crate and the turbine disk. When the employee attempted to pull out the right middle finger, the right distal phalangeal tip was amputated.",0
"An employee fell while walking out of work, suffering a broken left hip.",1
"An employee was performing remedial concrete work on a wall from an extension ladder. The ladder slid out from beneath him and he fell approximately 8 feet to the ground below. He broke his left wrist and suffered contusions to his left ribs, requiring hospitalization.",1
"On 12/12/2019, an employee was manually moving forms when he felt a ""pop"" in his stomach area. He was hospitalized with an umbilical hernia that required surgery.",1
An employee was repairing a leaky extrusion press when the employee slipped on oil from the press on the floor and fractured the right leg.,1
An employee was using a stump grinder to remove a tree stump from a golf course. The grinder's teeth lacerated the employee's right big toe.,1
"On December 12, 2019, an employee lost her balance and fell onto the floor, fracturing her left hip and requiring hospitalization.",1
An employee was on top of a tank when it exploded. He was thrown from the tank and required hospitalization for multiple fractures.,1
"An employee was operating a PIT vehicle when it struck a guardrail. As a result, the employee suffered five broken ribs.",1
"An employee was walking in a parking lot when another employee's vehicle hit him, causing a bone fracture.",1
An employee was guiding a fence panel that was suspended by a crane. The employee's finger was crushed between the suspended load and an object on the ground. The finger was amputated.,0
An employee using a table saw to rip lumber sustained a partial amputation to his left thumb.,0
"On December 12, 2019, an employee was helping with a crane load being lifted when a steel sheet slid out from the load and pinned the employee between the sheet and a manlift tire. The employee suffered a fractured right leg.",1
"An employee climbed a ladder to a roof. As soon as he stepped off of the ladder and onto the roof, he fell approximately 12 feet to the ground, suffering broken bones and a left ankle injury.",1
"An employee was loading wood onto a bandsaw for cutting. A part snagged, stopping the wood; the sawblade lacerated the employee's right middle and index fingers.",1
An employee fell from the fifth floor to the fourth floor while cutting a wood joist and suffered bone fractures.,1
"An employee was on a ladder fastening a structure on a tank when the employee fell off the ladder, suffering a fractured back.",1
"An employee was laying sticks on the back of a stacker when his finger was caught between a wooden board and metal pipe on the stacker, resulting in the amputation of his left ring finger.",0
"An employee was walking in a transfer yard when he tripped over a metal pipe, fell to the ground, and broke his leg.",1
"An employee was walking from a scrap pile to the office. A customer's pickup truck backed into the employee, causing a dislocated left shoulder and a broken right hip and leg.",1
"An employee fell onto a joist while tearing off decking, suffering fractured ribs.",1
"An employee was standing on a chair while filing when the chair rolled out from under her and she fell to the floor, hitting her head and tailbone.",1
An employee was cutting a tree when another tree fell and hit him on the head. He was hospitalized with a fractured neck and had surgery.,1
"An employee slipped on a water hose while walking in the wash bay, falling to the floor and suffering a broken hip. The employee was hospitalized.",1
"An employee was using a battery-powered hand drill to get paint out of tapped holes in a framework and mount casters/level feet when the employee's right thumb was caught in between the framework foot pad and concrete floor, resulting in a partial distal phalange amputation of the left thumb.",0
"An employee was walking toward the exit door of a lobby. She tripped, hit her face against the door, and broke her fall to the floor with her hands. She suffered injuries to the nose and arms.",1
"An employee was exiting the facility at shift change. While en route to the gate, the employee ducked and walked under a transport trailer. When he raised up, he struck his head against the metal structure of the trailer, injuring his neck.",1
"An employee was getting material from the back of a pot. His right ring finger was jammed, cut, and fractured.",1
An employee's right ring finger was caught between a steel plate. The finger was lacerated and fractured.,1
A CHEP employee was standing off to the side of a service area when a pallet jack operator lost control of the pallet jack and struck the employee's left leg against upright racking. He suffered broken bones in his left leg.,1
"An employee was walking to his car in the parking lot to move it when he stumbled on the curb, lost his balance, and fell. He hit his forehead, suffering a brain hemorrhage and loss of consciousness. He was hospitalized.",1
"While scraping off a car in a parking lot, an employee fell on ice and suffered a broken hip.",1
An employee was loading plastic film into a bacon packaging machine. The machine's cutting blade amputated the employee's finger.,0
"An employee was walking with a relief crew, inspecting rig-down operations. The employee fell through an open hinge floor plate, landing 3 1/2 feet below and suffering a dislocated left shoulder and broken left humerus.",1
An employee was clearing a jammed tray from a trim press when the perimeter die closed on the employee's right middle finger and amputated it at the first knuckle.,0
"An employee's hand entered an automatic slicer, resulting in a right index fingertip amputation.",1
A temporary employee was cutting pre-cooked chicken with a kitchen knife. The knife amputated the employee's left thumb tip.,0
"An employee was installing a 1,200-pound switch on a man lift. He finished securing the switch and was removing the round sling from the hook when he noticed that the headache ball was still coming down. He tried to move his hand out of the way by moving the hook. His left hand was then caught between the beam and the headache ball, resulting in an amputation of the left index finger to the first knuckle.",0
"An employee fell while walking down stairs, suffering a broken right leg.",1
"At about 8:45 a.m. on December 13, 2019,  an employee fell through a skylight during a re-roofing project. The employee landed on the concrete floor 18 feet 7 inches below, suffering a broken elbow, a shattered pelvis, and a compression fracture to his back.",1
An employee was delivering mail. She stepped out of her vehicle to deliver a package to a house and a dog bit both her legs; she fell and suffered a wrist injury. The bites became infected and she was hospitalized.,1
"On 12/13/2019 at 9:55 a.m., an employee was packing items for customers at her workstation when she tripped over a box on the ground and fell onto the concrete floor. She suffered a right ankle fracture and distal fractures to the tibia and fibula, requiring hospitalization and surgery.",1
"An employee had finished using an overhead crane with a c-hook attachment to unload steel coils off a flatbed trailer. Employees were trying to use a forklift to pick up the attachment for use at a different crane when the attachment fell over onto the crane operator, causing a broken left leg.",1
An employee suffered a partial finger amputation and a fracture of the distal middle finger when putting a chickpea cart back on the rail.,1
"An employee was climbing an A-frame ladder to remove a piece of plywood from a wall when he slipped and fell off the ladder, fracturing his left wrist. It was raining at the time of the incident.",1
"An employee was clearing a clog in an industrial vacuum when the automatic flapper shut on his left arm, crushing it and causing a laceration and bruising.",1
"An employee was operating an electric pallet jack when he turned the wheel and accelerated.  At that time, the employee's leg was outside the vehicle and was pinned between the pallet jack and a rack. The employee's right leg was fractured.",1
"An employee was working on a strut and spring, and placed the equipment in a spring compressor. The strut and spring released from the compressor, hitting him in the face. He suffered a fractured nose, fractured cheek bone, and shoulder injury.",1
"An employee's socks became wet while pressing on sand bags, which caused extreme blistering and skin around the area to turn black, resulting in a right toe amputation.",1
"On December 13, 2019, an employee tripped and fell in a corridor. The employee suffered a broken right forearm and underwent surgery.",1
"On December 14, 2019, at approximately 1:00 PM, an employee was walking through the parking lot returning to the store after break when she was struck by a motor vehicle, fracturing her right tibia and big toe.",1
"An employee was moving cows from one area to another area. When she attempted to close a fence gate, a bull struck her. She was hospitalized with a broken shoulder or collarbone and a possible collapsed lung.",1
"An employee was flying a helicopter, which had a mechanical failure. The employee's ribs were broken.",1
An employee was measuring the remaining plastic in a roll on a rotating shaft when the employee's hair was caught by the rotating roll. Her hair and skin were pulled off of her head,1
"An employee was using a stepladder to pour seasoning mix into a mixer. The scoop fell into the machine; as the employee was retrieving it, the machine amputated his right ring finger to the second knuckle and lacerated his right little finger with tendon damage. The machine was not guarded at the time of the incident.",0
"An employee was handling a steel manhole lid. The lid fell onto his right foot, breaking a bone.",1
"An employee slipped and fell in the store, suffering a hip injury that required hospitalization and surgery.",1
An employee was cutting fruit with a knife and amputated the tip of their left thumb.,1
"An employee was cleaning an aircraft window when she fell approximately 21 inches off a ladder to the ground, fracturing her L1 vertebra.",1
"An employee was cleaning up the restaurant for the evening. The employee grabbed a hot pot of water with his apron. The pot was so hot that he spilled the hot water on his left arm and hand, receiving second degree burns.",1
"An employee slipped and fell 16 feet to the floor below while laying floor decking, suffering a broken wrist that required hospitalization.",1
"An employee driving a forklift was backing up and fell off the loading dock. The employee attempted to jump off, but the forklift landed on and injured his pelvic area. A seatbelt was not worn at the time of the incident.",1
"An employee was walking in the kitchen when the employee slipped on water on the floor and fell, impacting the floor. The employee suffered a concussion/head injury.",1
"An employee slipped and fell on ice while walking to her car, fracturing her hip and requiring hospitalization.",1
An employee's left toe was amputated.,1
An employee was cleaning a conveyor when he attempted to remove stuck material. The conveyor then amputated his right pinky finger.,1
An employee was on site installing new furniture. He went out to the second-story balcony to throw out a box. The permanent metal railing failed and the employee fell from the balcony. He required stitches on his head.,1
"An employee was adjusting a bottle conveyor screw when his wrench slipped and fell into the clutch box assembly underneath the conveyer belt. He removed the face plate of the clutch box assembly and retrieved the wrench. Upon restarting the line, he received a clutch jam notification that stopped the machine. He went back to the clutch box assembly and attempted to determine what was causing the clutch jam. He asked a partner to intermittently operate the human machine interface that starts and stops the machine as he observed and adjusted the clutch mechanism and sensor. As he was troubleshooting back and forth between the clutch mechanism and the sensor, his finger became caught in the clutch gear and belt, resulting in a medical amputation to the left index finger’s first digit.",1
"An employee had hooked two concrete pilings to a travel lift crane. He was standing at the end of the pilings, holding a 2-inch by 4-inch by 3-foot board to use as a cushion between them. The board fell to the ground. While the employee was retrieving it, the pilings were lifted and pinched the employee's right arm.",1
"An employee tripped on a box while walking to a stock room. The employee fell to the floor, suffering a broken hip.",1
An employee was driving a utility vehicle when it hit a small tree in a median. The employee fell to the ground and suffered a hip injury.,1
An employee was descending a ladder when he fell to the concrete below and fractured his hip and leg.,1
An employee was threading a machine when the machine's 50-inch blade amputated four fingers on his left hand.,1
An employee fell from a ladder while picking orders to stock. She suffered a broken ankle and was hospitalized.,1
"An employee was fitting an engine frame onto its roll-over fixture. As the employee was guiding the pins on the engine frame into the holes on the roll-over fixture, the frame moved downward and pinched the employee's left hand between the frame and the roll-over fixture. He was hospitalized for hand surgery.",1
"An employee was descending a ladder while stocking groceries when she missed the last step and fell to the ground, landing on and fracturing her knee.",1
"An employee was slicing tomatoes when the slicer blade cut her right index finger, resulting in an amputation of the finger.",1
"An employee was helping install a metal staircase. It shifted and pinched the employee's left middle finger, amputating it at the first knuckle.",0
"An employee was closing a safe door when the door closed on the employee's finger, causing a fingertip amputation.",0
"An employee was working on a trailer unloading carts when he tripped and fell, injuring his right ankle.",1
An employee slipped on wet grass while delivering mail. The employee suffered a twisted right knee that required surgery.,1
"An employee fell through an attic ceiling, suffering a broken wrist and cheekbone.",1
"An employee was in the process of unloading a rail car. While he was disconnecting a product line hose containing sulfuric acid, residual pressure on the unloading line caused the sulfuric acid to expel and contact the right side of his face, right arm, and waist, causing second degree burns.",1
An employee pulled her back while watering a plant with a watering can. She began to have difficulty breathing and was hospitalized.,1
"An employee was on an A-frame ladder installing a data cable when he fell from the ladder and landed on the concrete floor, hitting his head and suffering head trauma.",1
"An employee was adjusting the fork width on a telescopic handler. The fork smashed his right index fingertip, causing the amputation of the tip with no bone loss.",1
"An employee was operating a plasma saw. When he attempted to clear metal shavings from the table, the saw blade caught his glove, pulling his left ring finger into the blade and amputating the fingertip.",0
"An employee was standing on two pallets, getting boxes down. The employee fell and suffered a broken right leg.",1
"An employee was showing a maintenance electrician a problem he was having moving a part of a mixing machine. When the injured employee adjusted the ball valves on the equipment the employee received an electric shock and sustained a fractured right scapula, and a fractured and dislocated left shoulder.",1
An employee was digging around the saddle of a sewer tap at a residential job site. The side wall of the ditch collapsed and a chunk of asphalt and dirt pinned the employee against the side of the ditch. He suffered broken ribs and a broken pelvis.,1
"An employee was installing gutters on a two-story residential roof. He fell while moving from the roof to a ladder, landing on a cement floor and suffering a broken arm.",1
An employee was using a power drill to drill a hole through a conduit when the drill bit pulled his leather glove and wrapped it around the bit. His left index fingertip was lacerated and his left middle finger was amputated from the nail up.,0
"An employee fell backwards to the ground while entering a personal vehicle, suffering a fractured pelvis.",1
"An employee was standing on a ladder installing a video surveillance camera. When the employee was climbing down the ladder, his foot slipped and he fell backwards, landing on his left arm. He sustained injuries to the left wrist and arm.",1
"An employee tripped while carrying a tub of silverware and fell to the ground, suffering a broken right ankle.",1
An employee tripped on forklift tines and suffered broken ribs.,1
"An employee was preparing to mop a floor and was wringing out the mop when she fell, breaking her left femur.",1
An employee was installing a 480 VAC circuit breaker when the employee's pliers contacted the energized bus bar and caused an arc flash. The employee was hospitalized with first and second degree electrical burns to the face and arms.,1
"An employee was on top of a coil, trying to align its head end with its tail end for stationary welding. The coil clamp was lowered onto the employee's left foot, amputating the big toe.",0
"An employee was using an electric pallet jack to position a load near a conveyor when the employee ran into the conveyor, suffering a left leg laceration that required surgery.",1
"A block from a crane pinned an employee's leg and fractured it, requiring hospitalization.",1
"An employee was descending a 3-rung ships ladder, missed a rung, and fell 36 inches to the floor sustaining a broken ankle.",1
"An employee was sorting packages in the back of a mail truck on a rainy day. As the employee exited the rear door of the truck, the employee slipped and fell out, injuring the right knee.",1
"An employee was rolling an 80"" tall x 9"" round, 1,500-pound tool to storage when the tool began to tip over. He tried to stop the tool from falling and it landed on the lower part of his body, causing a possible fractured hip.",1
"An employee was on a ramp, delivering food using a hard cart. The employee slipped and fell, suffering finger cuts and an amputation to the left little finger at the first knuckle.",0
An employee was clearing a clogged pipe when their hand was caught inside a pump motor. The employee suffered a fractured hand and lacerated fingers.,1
"An employee was lifting cam blocks out of a die when the employee felt stomach pains, requiring hospitalization for a hernia.",1
"An employee was bringing belongings into a patient's room when another patient followed him into the room and struck his right temple with his fist. The employee fell, hitting his head on the patient's bed and floor. The employee also struck his tailbone against the floor as he fell. He was hospitalized with head and tailbone injuries.",1
An employee fell while exiting a trailer on a load stand. He landed on his right knee and suffered a broken kneecap.,1
"An employee was using an overhead crane when an attachment fell, striking her and injuring her leg. She was hospitalized.",1
"An employee was walking through a hallway when the employee slipped and fell on the wet floor, suffering a Colles fracture.",1
"An employee was using a circular saw to cut a wooden post when the saw blade cut the employee's index finger, resulting in a possible amputation.",1
"Two employees were changing out a plastic mold cavity. The machine engaged while one employee's hand was in it, and the employee's right little fingertip was amputated.",0
"An employee's foot was caught in the chain and sprocket of an unscrambler, causing severe injuries on the lower left leg.",1
An employee fell while stepping off a two-step stool. The employee suffered a back injury and was hospitalized.,1
An employee was attempting to grab a bottle that was jammed in the trip chute of a blow molding machine when the trimmer block cycled and amputated approximately one-half of his left index finger.,0
"While operating a tube bender machine, an employee's right pinky finger was caught in a pinch point on the machine, resulting in a pinky finger amputation.",1
An employee stepped onto a 2-inch diamond plate floor scale ramp to weigh a chemo waste container when he slipped and fell on the scale. He was hospitalized with a broken right leg.,1
"An employee slipped on ice and snow while walking across a parking lot. The employee fell, suffering broken ribs and a broken clavicle.",1
An employee was probing ground. The bucket of a mini excavator struck and lacerated the employee's lower left leg. The employee was hospitalized.,1
"After parking his vehicle, an employee was walking to a security office when he slipped on black ice in the walkway. He fell, suffering broken ribs and a possible collapsed lung.",1
An employee was driving a forklift when his right forearm/wrist/hand was pinched between a wall and a junction box. He suffered a cut to the forearm that required two stitches and a muscle injury to the hand that required hospitalization and surgery.,1
"On December 16, 2019, an employee was moving raw material to a band saw area when his right middle finger was caught in the saw's vice clamp, crushing two fingertips on his right hand. He was hospitalized.",1
"An employee was exiting the rear of a delivery vehicle from the passenger side using three points of contact when his foot slipped off of the vehicle's step. He was unable to grip the handrail before falling on the ground. His left hip hit the rear bumper, causing a fracture to his hip, and he also fractured his wrist upon impact with the ground. He was hospitalized.",1
"An employee fell 13 feet from a metal roof to the ground. The employee was hospitalized with broken legs, arms, and ribs.",1
"An employee was working from a 10-foot ladder, pulling old telephone wires in a ceiling. The employee fell off the ladder and suffered a concussion, a small brain bleed, and a dislocated left hand.",1
"An employee was pulling a tube and injured his back, requiring hospitalization.",1
Two employees were troubleshooting a conveyor in a feed mill. The conveyor caught one employee's coat and pulled his left arm in. The arm was lacerated and his index finger was partially amputated. He was hospitalized.,1
An employee suffered a left index fingertip amputation while operating a grinding machine and clearing material that was stuck on the screw.,0
"An employee was working on a water blast machine when the employee's right index finger was caught between the hydraulic clamps, resulting in hospitalization and subsequent partial amputation.",1
"An employee was operating a packaging machine when a piece of cardboard jammed. He was clearing the machine when a gluer tube exploded, spraying the machine and the employee with 350-degree melted glue.",1
"An employee's hand was resting on a hydraulic dump trailer when the down button was pressed instead of the up button. His right pinky finger was then pinned by the dump trailer, smashing his fingertip.",1
"An employee participating in a team building event lost her footing while trying to hit a balloon. She fell backwards to the ground and landed on her hands, fracturing her left wrist.",1
"An employee was asked to load large granite slabs onto a truck with the assistance of another person. The slabs were on a dolly. When he moved the slabs, a domino effect occurred and the slabs fell on him. He was caught underneath, crushing and breaking bones in both legs.",1
An employee was taking materials and supplies from a pallet inside the warehouse when a brown recluse spider bit him in his left elbow area. He was hospitalized.,1
"An employee was moving a kitchen cabinet using a dolly when he ran over a metal piece and his left foot was caught between the dolly and metal piece, fracturing his three middle toes.",1
"On 12/17/2019, an employee was moving a steel beam in the yard when it dropped, crushing the tip of his index finger. Surgery was required, resulting in bone loss to the fingertip.",0
"While moving boxes to another floor, an employee entered an elevator and stepped on a few empty boxes. The employee then fell in the elevator and fractured a leg.",1
"An employee was sweeping a floor. The employee fell, landing on the floor and suffering broken ribs and a punctured lung on the right side.",1
"An extension ladder slipped out from underneath an employee. She fell about 7 to 10 feet; her right arm was broken in multiple places as she fell, and she landed on the ladder.",1
"An employee was stacking boxes of vegetables on a wooden pallet when his foot was caught between the wooden slats of the pallet. He lost his balance and fell to the ground and onto his right hip, resulting in a fracture that required surgery.",1
"An employee was unloading new mattresses off the bed of a pickup truck when he fell and hit his head on the ground, sustaining head trauma.",1
"While walking, an employee's feet became caught on the concrete floor, causing the employee to trip and fall into the wall/floor. The employee suffered a broken left wrist and right shoulder and required lip stitches.",1
"An employee was in an uninsulated attic installing a thermostat wire. While he was walking on a truss chord, the lumber broke and he fell through the ceiling to the concrete floor below. He suffered a broken leg and blunt force trauma, requiring hospitalization.",1
"An employee was setting a retaining wall. The employee's left hand was caught between a shackle and rigging, and the index finger was amputated at the second knuckle.",0
"An employee was pulling a mixing bowl from a bowl lift when the bowl slipped, hit another bowl, and injured the tip of his left ring finger, resulting in a fingertip amputation.",1
"An employee was working on a distribution line after a storm, repairing a fused cutout switch that was 7,200 volts, when he contacted the live switch and received a flash burn on his right arm.",1
"An employee was working at a head rig saw when a conveyor carrying wood slabs jammed. The employee went to clear the jam, and the employee's left index finger was pinched and cut between the jammed slab and another slab.",1
"An employee was using a battery-operated impact drill to screw a lag bolt into a wooden pallet. The bolt caught the employee's gloved left hand, and his middle finger was amputated.",1
An employee was struck by a vehicle in a parking lot while walking to a building. The employee suffered a broken left lower leg.,1
"An employee was operating a continually running radial saw. He attempted to clear debris from the saw when his left hand touched the blade, resulting in amputations of parts of the middle and index fingers.",1
"An employee was climbing up a ladder when she fell, suffering a pelvic fracture.",1
"While walking into the building, an employee slipped and fell on ice and snow, suffering a brain bleed.",1
"An employee was attempting to move a luggage cart when she lost her balance and fell to the ground, breaking her hip. She was hospitalized and had surgery.",1
An employee slipped on ice and sustained a broken ankle.,1
"An employee was stationed on the winder end of a winding machine and tasked with observing the product (roll of paper poly/film) being rolled. The employee had his left hand crushed between the floating shaft (holds roll on machine) and ejector roll bar, resulting in the ripping/amputation of the tips of the middle finger and ring finger by the machine.",0
"While walking toward the store, an employee slipped on ice in the parking lot and fell. The employee was hospitalized with a fractured leg.",1
"An employee fell from a plane while loading the cargo bin with luggage. The employee landed on the ground, suffering head injuries.",1
"An employee was conducting maintenance operations when he attempted to clean flour out of a pipe so he could look inside. His right index finger was caught in the pipe, resulting in a fingertip amputation.",0
An employee was helping to load paper onto trucks and was cutting a nylon cord with a paper knife when the knife severely lacerated his right hand. Gloves were not worn at the time of the incident.,1
"An employee was repairing a leak on a gas line in the vicinity of a melting furnace. After fixing the gas line, the employee noticed the leak was still present. The employee was doing additional repairs when a flash fire occurred, causing burns to the front of the employee.",1
"On December 17, 2019, at 11:00 AM, two employees were in a scissor lift in an elevated position repairing a natural gas furnace. One of the employees was not contained by the safety gear of the scissor lift and fell approximately 8 feet onto the floor of the warehouse. The employee sustained a fractured skull, fractured vertebrae, and bleeding on the brain as a result of the fall.",1
"An employee was helping break down a transformer and rig copper winding onto a rough-terrain forklift. The forklift struck the employee against the transformer's base, breaking two of the employee's ribs on the left side.",1
An employee was burned with water while checking a piping system. The employee suffered first- and second-degree burns.,1
An employee was pulling electrical wires from a pulling machine when a piece of the equipment became loose and struck the employee's forehead. The employee was hospitalized with a forehead cut.,1
"An employee was adjusting a piece of wood on a multi-saw stacker conveyor fork when the employee's right middle finger was pinched between the fork and the wood, resulting in a right middle fingertip amputation.",0
"Employees were moving an electric motor with a crane. When the motor came free, a piece of its mount struck an employee, breaking their left forearm.",1
"An employee was standing in the doorway of a room with his hand resting between the door and frame when the self-closing door closed on his left hand, resulting in a ring fingertip amputation.",0
"An employee and a co-worker were turning over a piece of structural steel for painting operations when the steel rolled onto the injured employee's right foot, resulting in fractured bones.",1
"An employee was on an A-frame ladder while installing a gutter system when the employee lost footing and fell 5 feet to the ground, suffering a broken leg.",1
"An employee was using a skid steer to move a metal pole stand, used to support a wooden electrical pole. The wooden pole slid on the forks of the skid steer and pinched the employee's right little finger against the pole stand. The fingertip was amputated.",0
"An employee was using a transport dolly to maneuver a metal frame from one area of the plant to another when the base of the metal frame started to slip off the dolly. The employee's left hand was in the pinch point zone, and the metal frame contacted the employee's hand. The employee's left ring finger was lacerated, resulting in the surgical amputation of the fingertip.",0
"An employee was investigating a smell behind the office. She entered the 6-foot high wooden fenced-in area when the self-locking gate proceeded to lock behind her. After several attempted calls for help, she proceeded to climb the fence and jumped down on the parking lot side. She landed awkwardly, fracturing the tibia and fibula in her left leg",1
"An employee's right pinky finger was caught in a pinch point between overlapping cables, resulting in an amputation to the finger.",0
"An employee was in her office, getting out of her desk chair. When she pushed the chair away from the desk, the wheels of the chair caught on a portion of the carpet. The chair tipped backwards, causing the employee to hit her head on the desk behind her and sustain a cut to the head.",1
An employee was installing a 10-foot fiberglass column when the employee lost control of the column. The employee's left middle fingertip was amputated between the fiberglass and the ground.,0
An employee was hospitalized after suffering a traumatic injury with a sprained lower right arm and wrist.,1
An employee slipped and fell while trying to access a 5-ton truck in a maintenance shop. The employee's throat struck a handrail and suffered a contusion.,1
"An employee tripped and fell to a concrete warehouse floor, suffering a broken right hip.",1
"An employee was stocking an item when a forklift ran over his foot, breaking it.",1
"An employee was removing three guards to access the adjustment knuckles on a conveyor belt. While the employee was observing the belt, he fell forward toward the conveyor. His left arm landed on top of one of the conveyor rollers and was pulled under it, sustaining a compound fracture. The employee was hospitalized.",1
"An employee was trying to move an aluminum baking rack that was stuck to another rack. A second employee was attempting to help the injured employee un-stick the rack when the racks shifted and crushed the employee's left middle finger between two of the racks. As a result, the employee's left middle fingertip was amputated.",0
"An employee was getting out of a truck at his hotel when he fell to the ground, suffering a ruptured patellar tendon.",1
"An employee in the cooling tower yard was making adjustments to a chiller plant when he tripped over a piece of maintenance equipment and fell to the concrete surface on the same level. He was hospitalized with a fractured hip, requiring surgery.",1
"An employee was attempting to pull a dry skid off a trailer and onto a rail gate (a moving platform that freight is loaded onto) with a pump jack. The rail gate was slippery from the previous day's snow. He got onto the platform of the rail gate and turned the handle of the pump jack to stop its movement, but the pump jack kept sliding toward him. As he tried to get out of the way, he fell approximately 4 to 5 feet to the ground. He suffered a cut over the left eye, bruised ribs, and a crushed left elbow.",1
"An employee was walking toward a bucket trailer truck, 6 feet off the road. A car fishtailed out of control and struck the truck and the employee, breaking the employee's left femur.",1
"The injured employee was assisting another employee, who was operating a punch press. The press was actuated as the injured employee was pulling out a part, partially amputating their right index finger.",0
"An employee was operating a walkie/rider electric jack to perform warehouse stocking activities when the employee was crushed between the jack and a rail, resulting in a fractured right ankle.",1
An employee was using a grommet to punch in material when the grommet caused an amputation to the employee's left index finger up to the nail.,0
"An employee was closing a dump truck tail gate when the tail gate closed on his right thumb, resulting in a partial thumb amputation.",0
"An employee was helping another person move a pallet with a transformer on it when he dropped his side of the pallet. He was unable to move his hands in time and the transformer landed on his fingers, resulting in amputations of the left middle and ring fingertips, as well as the right middle fingertip.",0
"On December 18, 2019, at 11:00 a.m., an employee was uncrating a large machine when one side of the wooden crate fell and he was pinned underneath it, resulting in a fractured pelvis and hospitalization.",1
"An employee was moving the tubing tongs on a workover rig over the head when the tongs caught the head and the level became stuck while the motor was in high gear, causing his gloved hand to become wrapped in the coil. His left distal phalange was degloved, resulting in an amputation.",0
"An employee was walking through a neonatal intensive care unit to put a pacifier in an infant's mouth. The employee tripped on the cord to a machine and fell, landing on the floor on her stomach. She suffered a broken right ankle.",1
"An employee was working in the bakery back room when she tripped, striking her arm on the leg of a metal table. She was hospitalized with a broken arm.",1
"An employee was lifting boxes in the casting department when the employee slipped and fell, suffering burns to the hands and thigh.",1
"An employee slipped on black ice while closing the back door of a truck trailer, impacting the ground and breaking the right leg.",1
An employee was standing in the hallway of a pediatric unit when a coworker sprayed aerosolized air freshener and the employee began having wheezing and having difficulty breathing.,1
"An employee was clearing a parking lot when the employee slipped and fell on ice, suffering a broken ankle that required surgery.",1
"An employee was removing a cast iron heater from the overhead in a mill. Ropes that were temporarily holding the unit broke and the unit knocked the employee from his ladder to the floor. He suffered 11 broken ribs, a punctured lung, and a head laceration and was hospitalized.",1
"An employee was dismounting from a crane onto the work deck next to the cab. He attempted to jump from the platform approximately 3 feet across to a road work area. When he landed, his foot slipped and he fell backwards to the ground. He was hospitalized with a fractured vertebra.",1
"An employee was struck by a train while driving a tractor. He was bounced around inside the cab, suffering contusions.",1
An employee was moving a cart of poles and metals when the cart tipped over and hit his head and fractured his right leg.,1
"An employee was climbing down an aluminum extension ladder when he missed the last step of the ladder with his foot and fell on the concrete floor, injuring his upper torso and head.",1
"An employee was guiding a bucket truck that was being backed up when he tripped and fell, hitting his head on a concrete sidewalk and breaking his neck.",1
"An employee fell down stairs to a concrete floor, suffering a concussion.",1
"An employee was setting a ladder on the side of a house when the employee lost balance and fell backwards to the ground, breaking both wrists.",1
An employee was entering a building when she tripped on the edge of a rug (in place to collect snow/water/ice/salt in the entryway) and fell to the concrete. She suffered a broken left hip.,1
"An employee was working on the setup of an aluminum caster machine. The machine, which is supposed to cycle once at a time, must be cycled in order to gauge the machine. The machine cycled once and the employee was attempting to gauge it when the machine cycled again, closing down on his fingers. All fingers besides the thumbs were crushed on both hands.",1
 An employee was working from a ladder cleaning a bead blast conveyor when he fell from the ladder and fractured his L1 vertebra.,1
"On December 19, 2019, an employee was conducting maintenance on a forming machine. He was checking the machine's ventilation system when the mold came down on his right thumb, causing an amputation without bone loss.",0
"Two employees were observing a crew who was in the process of reconfiguring a well head. Trapped pressure was released within the well and blew shrapnel (nuts, bolt, plastic parts of the inside of the valves that are part of the well head tree) at the two employees. One employee received an amputation injury to his right thumb. The other employee received shrapnel injuries to his body requiring him to be hospitalized and undergo surgery to remove the shrapnel.",1
An employee was working on a tractor trailer's brakes. His brake wrench hit him in the left eye. He was hospitalized.,1
An employee was working on the chain and pulley of an overhead door when the chain hooked to the employee's glove and pulled his hand onto the sprocket. He sustained a couple of broken left-hand fingers and damage to the nerve and veins.,1
An employee working on a machine sustained a partial amputation of the right index finger.,0
"A maintenance employee was descending a ladder to the pit floor to check the governor tension sheave switch when he either missed or slipped on one of the bottom rungs and fell, breaking his leg.",1
"An employee was walking to his truck when he slipped and fell on ice in the trailer lot, landing on and injuring his right knee.",1
"An employee was getting down from a truck when the employee's ring finger was caught on a hook, resulting in a partial finger amputation.",1
"An employee fell off a 7- to 8-foot ladder, suffered broken ribs, and was hospitalized.",1
"An employee was on a ladder, retrieving merchandise for a customer order. He fell from the ladder, about 3 feet, and his right little fingertip was caught on a shelf and amputated at the knuckle.",0
"An ironworker was unhooking a steel beam. When he cabled up on the crane, the rigging hook hung on the beam and pulled the beam over onto his right leg, breaking it.",1
"On 12/19/2019, at 9:05 AM, an employee was walking around a parked concrete truck when the employee slipped and fell on the icy pavement, fracturing the left tibia and fibula. The employee was hospitalized.",1
"A temporary employee was cutting banding from a bundle of steel tubing. When the last section of the banding was cut, the tubing rolled and caught his left pinky finger between the tubing and an upright stop on the table. His left pinky finger received an avulsion that resulted in a medical amputation of the fingertip.",1
"An employee was using a drill press when the employee's glove was caught in the running drill bit, resulting in a partial finger amputation.",0
"An employee was inspecting a cotton gin that was sparking. The lower service door was removed, and the employee looked into the machine and used his left hand to steady himself on the doffer scroll. The machine was electronically locked out but had not come to a complete stop at the time. The doffer pulled the employee's left hand and arm 18 inches down into the radius scroll, severely injuring his left arm.",1
An employee was painting on a scaffold when he slipped and fell approximately 5 feet from the scaffold to the floor. He was hospitalized with a fracture to the L2 vertebra.,1
An employee fell to the ground in a parking lot and broke an elbow.,1
"On December 19, 2019, an employee was working inside an electrical vault. As the employee tried to climb an extension ladder, the ladder failed and the employee fell about 15 feet, suffering a broken pelvis and two broken wrists.",1
"While removing a crushed can from a seamer, an employee cut their thumb on a torn can edge.",1
"An employee was pulling stacked recyclable cardboard when he fell backwards, landing on the ground and suffering an elbow injury.",1
"An employee slipped and fell on black ice in the parking lot, suffering a blood clot in the back of the head close to the neck.",1
"An employee was holding an asphalt wand to spray liquid asphalt when the wand's hose burst, spraying hot asphalt onto the employee. The employee suffered burns to the face, ear, and hand.",1
"An employee was attempting to lift a 40-pound box of banding clips onto a table that was 36 inches tall. The box became caught on edge of table and he lost his balance and fell, fracturing his hip.",1
An employee was clearing a jam in a production line when an air piston actuated and caught the employee's right index finger. The finger was partially amputated.,1
An employee was standing on a forklift trying to empty a dustbin barrel. The barrel slipped and the employee fell into a hopper. The employee's right leg was pinned under the barrel and broken.,1
"An employee was cleaning a planer wheel with a paper towel when he was pulled into the machine, ripping the skin from his arms and requiring stitches.",1
An employee was installing a piece of equipment in the facility that involved moving the equipment into place and plugging it into a receptacle. The employee realized the plug and the receptacle did not match. When the employee removed the receptacle from the wall to inspect the wiring an arc flash occurred and burned the employee's hands.,1
"A temporary employee was loading mattresses in a trailer. A mattress fell and knocked him out of the trailer to the ground. He suffered head and neck injuries, including a large cut on the head.",1
"An employee was placing sheet metal onto a hydraulic shear when his left hand was caught between the down and shear, resulting in a left middle finger amputation.",0
"An employee slipped and fell on ice while walking into the building, fracturing the right ankle.",1
"An employee was cleaning dirt from the tip of a sprayer nozzle and wand when the gun actuated while his palm was directly under the nozzle. The paint penetrated far into his hand, causing tissue damage and the entry of foreign material.",1
An employee suffered a partial amputation of their middle finger while using a drop saw.,1
An employee was trying to calm a residential client and direct him back to his room. The employee's left thumb was caught in a door and the tip was amputated.,1
"At 6:00 a.m. on December 20, 2019, an employee was positioning a hoist to move a rack of tooling to a wash bay. As the employee operated the hoist to remove the slack from the chain, the eyehole of the hook pinched and smashed the employee's left index finger due to the weight of the rack being lifted. The employee's fingertip was amputated.",0
"An employee was operating a horizontal fiber baling unit when the steel door to the baler closed on his left hand, amputating his left thumb tip.",1
An employee's right ring fingertip was caught and injured between a large roll pin and a roller.,1
"An employee was getting leaf rakes from a truck when a vehicle struck the back of the truck, also hitting the employee. The employee suffered a broken leg.",1
"An employee was stepping off of a 24"" tall platform when he fell and landed on a 1"" steel pipe, suffering fractured ribs and a perforated lung.",1
"An employee was at a press, aligning a die, when the stripped plate dropped and amputated the employee's left little finger.",1
"After driving around the bank to check the ATM and make sure the building wasn't broken into, an employee exited her car and slipped on ice. She fell and broke her leg.",1
"An employee was crouched down, doing maintenance work on a brush cutter, when a truck backed over her leg. Her right femur was broken.",1
An employee was moving the scrap skeleton of a steel plate when his thumb was caught between the scrap bin and the steel plate as it slid into place. His right thumb was fractured.,1
"An employee was retrieving a customer's walker and lost balance, falling to the ground and breaking the left hip.",1
"An employee was loading a new bore roll in a machine when his left index finger was smashed between the roller and cone, causing a laceration that later resulted in a fingertip amputation.",0
"A temporary employee was unloading a crated kitchen range from a tractor trailer at the warehouse's dock when he mis-stepped, slipped, and lost control of the load. He then fell and was struck on the head by the falling appliance, suffering a mastoid effusion, L1 burst fracture, severed central canal, compression of conus or proximal calida equina leukocytosis, and hyperglycemia.",1
"On December 20, 2019, an employee fell approximately 8 feet while climbing wall supports during the construction of the exterior walls of a pole barn. The employee was hospitalized for fractured ribs and vertebrae.",1
"An employee was trying to free a stuck mold from a blow mold machine. The mold closed on his right hand, crushing it. His index finger had to be amputated during surgery.",1
"An employee was pulling a customer order on an electric pallet jack. When he stepped off the jack, it ran over his right ankle, crushing it.",1
An employee was driving an ATV to check Christmas light displays when the ATV tipped over onto the employee. The employee was hospitalized.,1
"While removing scaffold components, an employee tripped over a pallet. The employee's right hand got caught between bearings and the ring finger was broken. The employee was hospitalized.",1
An employee was walking toward equipment when the employee tripped on a 2-inch pipe on the ground. The employee hit their nose and upper lip and suffered a dislocated shoulder.,1
An employee was unloading and strapping material on the bed of a flatbed truck at a customer's location when he tripped on an A-frame and fell to the deck of the truck before rolling off to ground. He dislocated his shoulder and sustained a neck injury.,1
"On December 20, 2019, an employee was installing insulation for an HVAC unit when he possibly stepped on a nail. The next day, his middle toe became infected, requiring hospitalization.",1
"On December 20, 2019, an employee received a left thumb tip amputation while using a chop saw.",0
An employee was placing sheet metal onto the table of a hydraulic shear. The machine caught his left middle finger and amputated the tip.,0
An employee pulled back muscles and experienced back spasms while placing a heavy garbage bag into a compactor.,1
"While throwing cardboard to a compactor, an employee tripped over an empty flattened box on the floor. The employee suffered a fracture and was hospitalized.",1
"An employee was changing the belt on a machine that was powered down when his gloves became caught in between the belt and the pulley, resulting in a partial right thumb amputation.",1
"While walking, an employee slipped on ice and fell sustaining a fractured hip.",1
"On December 21, 2019, at approximately 5:30 p.m., an employee was changing the linens on the bed of one of the members (residents) at the facility. The employee tripped on the cord of the call light button and fell onto the floor. As a result of the fall, the employee sustained a bloody nose and a left arm fracture.",1
"An employee was helping a nurse's aide pull up a resident's pants when she felt a pop in her back, requiring hospitalization for a back injury.",1
An employee's hand was caught in a trimming machine's point of operation. One of the employee's fingers was amputated.,1
An employee was cutting meat with a saw when his left hand contacted the saw blade. The employee sustained amputation of fingers on the left hand and a laceration to the upper inner arm.,0
"Two employees, both carrying food items, collided in a kitchen. One of them tripped, hit the ground, and suffered a dislocated shoulder. The employee was hospitalized.",1
"An employee was installing a piece of grated flooring when the flooring that the employee was standing on slipped, causing the employee to fall into the wastewater tank below. The employee suffered block vertebrae in the lower back.",1
An employee was troubleshooting a machine when the cutting blade partially amputated their left index finger.,0
"An employee was holding a column in place when the eyelet broke, causing the column to shift and strike the employee's back. The employee was hospitalized with a back fracture.",1
"A roadside technician was under a truck replacing a steer tire. The truck fell off the jack and pinned the employee, who suffered a broken pelvis.",1
"An employee was erecting a tower crane when a beam attached to the ballast tower base folded onto the employee's left hand, crushing it.",1
"An employee was inspecting a washer when another washer sprayed him with water and hot steam, burning his back, arm, and possibly his chest. He was hospitalized.",1
An employee was cleaning slag off the platform and slipped off a ledge. Their foot fell into a molten zinc pot resulting in burns to the leg and foot.,1
"An employee was pulling slack on an auxiliary winch line mounted to a pressure drill rig. A sheave mast struck the employee's right hand, causing a laceration, broken bones, and the amputation of the middle finger.",1
"An employee was on top of a working platform. While exiting the platform around the tank, a pressurized line came loose and knocked the employee to the ground. The employee suffered a fractured right arm and fractured ribs.",1
"An employee was prepping lettuce outside of a freezer door. As she walked in front of the freezer, someone opened the door. The door hit her right shoulder. She then lost balance and fell onto her left side on the floor, fracturing her left hip and lower femur.",1
"An employee tripped over a stress mat on the ground while walking between machines, suffering a fractured right hip.",1
An employee slipped and fell on a wet surface while delivering mail. The employee suffered a broken leg and was hospitalized.,1
An employee working as a pallet sorter was moving bales of cardboard with a pallet jack when a bale fell over and struck him on the head and back. He was hospitalized for back and head injuries.,1
An employee was adjusting a floor rug when his foot slipped and he fell to the floor. He suffered an injured hip and was hospitalized.,1
"An employee was lowering a scaffold board using a rope and pulley assembly when the board slipped out of the rope and fell. The board caught a tangle in the rope and caused the hook end of the rope to shoot upward, where it hit the employee in the face and head. The employee suffered a probable fracture or concussion and tissue damage in the right eye area.",1
An employee's left middle finger was lacerated while the employee was moving a railing segment. The fingertip was medically amputated.,1
"An employee fell while skiing down a ski run, sliding to the bottom of the run and suffering a broken left tibia and fibula.",1
"An employee was climbing a ladder to access a second-story roof. The ladder slipped/moved and the employee fell about 20 feet to the ground, suffering a lower back fracture.",1
"An employee tripped on a pallet while moving a trash can. The employee fell to the concrete floor, suffering an oblique fracture of the left femur.",1
An employee was hooking up a water trailer to a truck. The trailer moved and the employee's left ring finger was caught between the trailer coupler and the hitch ball. The fingertip was amputated.,0
"Two employees were troubleshooting a whining noise on a machine. The machine was activated while one employee's left hand was on a conveyor belt feeding into it, and the employee's thumb was pushed toward the rollers and caught between a roller and the belt. The tip of the thumb was amputated.",0
A cashier was shot in the leg by one of two people robbing a store. The cashier suffered a broken femur.,1
An employee was working on the grippers on a cheese slicer. The employee's right thumb was caught between the pulley and the tooth belt. The tip was amputated.,0
"An employee fell in a parking lot, suffering a broken ankle.",1
"An employee was standing on the back of a boom truck, installing gates. A hinged section of a gate moved and caught his right index finger, causing the amputation of the fingertip.",0
An employee was preparing to remove a plastics injection mold from a press. The employee's left ring finger was caught between a jam bar and a mold press plate and was amputated.,0
"A drilling rig was tripping pipe out of a hole. An employee grabbed the drill stand before the spinners latched, causing amputation of the employee's left middle finger.",0
An employee was removing snow and ice from the parking lot with a skid steer loader when the loader struck into a pile of snow and ice. The employee suffered an umbilical hernia.,1
"A parts delivery driver offloaded two boxes from a van onto a hand truck. As he was pulling the hand truck back, he slipped and fell, his right side hitting the ground. He suffered a broken right hip and was hospitalized.",1
"An employee was entering a hospital on a walker. She tripped on a walk-off mat just inside the door, falling and breaking her left ankle.",1
"An employee was walking on a steel beam when he fell about 26 feet to the frozen ground below. He suffered injuries to the back, ribs, and head.",1
"An employee was working on the roof of a construction project. The employee fell through a 5-foot by 5-foot opening, landing on a floor about 24 feet below and suffering head and neck injuries.",1
"An employee was performing a belt replacement on a fan motor for the AC-1 unit. The employee had locked out the power source(s) to the fan motor, loosened the motor / tension on the belts, and replaced the belt when the pulley ""free-wheeled."" Her fingertip was caught between the belt and the pulley, resulting in a fingertip amputation.",0
"A longshoreman was standing next to a partially lifted load of mixed-length pipe, preparing to pull slings from beneath the load supported by the vessel's crane. One 20-foot piece of pipe (stowed on top of 40-foot pipe) rolled from the bundle, rolling onto the longshoreman's left ankle and causing multiple fractures. The longshoreman was hospitalized.",1
"An employee was bending metal on a 3-foot press brake. The employee's finger was caught between the metal and the press brake die, causing an amputation of the right index finger.",0
"An employee was walking into a facility when she slipped and fell to the concrete ground, injuring her right hip.",1
An employee was feeding a caged primate. The primate bit the employee's right little finger. The fingertip was amputated.,0
"An employee was checking a customer's backyard for electrical service when the employee stepped on a pad transformer, slipped, and fell to the ground, breaking the lower back.",1
An employee fell from the dock and sustained a broken ankle and a dislocated shoulder.,1
A forklift collided with another forklift as it exited an aisle. Its operator's left tibia was broken in the collision.,1
"An employee was stocking a remix pallet of bulk cereal and small paper. The employee lifted a box of napkins off the pallet, then fell onto their right side. The employee suffered a broken right femur, requiring surgery.",1
An employee suffered a reaction to a mandatory flu shot.,1
An employee was struck by a vehicle while crossing a street to deliver a package. The employee was hospitalized.,1
A metal shipping bar cut off a driver's toes.,0
"An employee was clearing a roof to install solar modules when he slipped and fell to the ground 10 feet below, fracturing a vertebra in his back.",1
"While walking a site, a security officer was stabbed with a knife. The officer was hospitalized.",1
"An employee was grinding metal wire on a benchtop grinder. The grinder pulled in the employee's left hand, causing a partial amputation of the ring finger (to the second knuckle) and a partial amputation of the little finger (to the first knuckle).",0
"On 12/23/2019, an employee was working as a caregiver at a client's house when she hit her head on an air conditioning unit. She was hospitalized with a  concussion and laceration.",1
"An employee was using a mechanical meat slicer to slice sausage, placing the sliced sausage into a container. The container slipped and the rotating blade cut his right thumb, amputating the tip.",0
"An employee was locating underground utilities at a street intersection. A car hit the employee, who suffered two broken legs and a broken arm.",1
An employee was visiting a client's home when she slipped on an icy lawn and fell onto her hip. Her hip was broken.,0
"An employee was helping a second employee carry a gas meter down the exterior stairs at a customer's premises. The employee was walking backward in the lead, while the second employee walked forward in the rear. The gas meter weighed approximately 70 pounds. About halfway down the stairs, the employee walking backward lost his footing and fell down the stairs, breaking his left leg. He was hospitalized and had surgery.",1
An employee tripped over telephone wires while sitting at her desk. She suffered a broken shoulder.,1
An employee was injured by an arc flash after equipment was re-energized. The employee was hospitalized.,1
"While entering a vehicle, an employee slipped on black ice, fell, and suffered a kneecap injury.",1
"An employee was working on a feed system. Spring tension caught and pinched the employee's left middle finger, causing a broken bone and a laceration. The employee was hospitalized.",1
"An employee slipped while walking through a facility, falling to the floor and suffering an open head wound. The employee was hospitalized.",1
"An employee was lifting a drum from a pallet when the employee's left middle finger was caught between the drum and pallet, resulting in a fingertip amputation.",0
"On December 26, 2019, an employee was using an air-powered grinder to remove slag from an 875-pound steel part, suspended over a wooden pallet with a permanent lifting magnet. The part slid off the magnet from 40 inches above the floor and struck the employee, causing fractures to the employee's left-side pelvis region. The employee was hospitalized.",1
"An employee slipped while skiing, falling to the ground and suffering a broken pelvis.",1
"An employee was in a stockroom, looking on a shelf for a pair of shoes for a customer. He fell to the floor, suffering a laceration to his head and fractures to a rib and his shoulder.",1
"An employee was struck on the head by a clamp used on a forklift while working with a material handler, suffering a head contusion.",1
An employee was patrolling in an ATV. The ATV struck a border fence and the employee suffered a broken left arm.,1
"An employee fell while stepping off a 6-inch platform, landing on the floor and suffering a broken rib and a collapsed lung.",1
"While lifting return totes, an employee heard a popping sound between the right shoulder and elbow. Approximately 2 hours later, the employee lifted another tote and heard the popping sound again. The employee was hospitalized with a broken arm.",1
"Two employees were working at a press machine to assemble valve bodies. When the machine was turned on, one employee's left middle finger was caught in one of the side presses and was partially amputated.",1
"A metal strap (which had been holding a clamp together) came down on an employee's left ring finger, crushing and breaking it.",1
An employee was cleaning the fat puller end of a puller machine when she attempted to remove a piece of chicken fat from the plastic auger's point of operation. The plastic auger then amputated her right index fingertip.,0
"On December 26, 2019, an employee fell and hit an elbow. The employee was hospitalized with a fractured elbow.",1
An employee was cutting a section of pipe at an angle using a table saw. The employee lost his grip on the pipe and his hand slipped back against the blade of the saw resulting in a laceration to the left index finger.,1
"An employee was on a ladder, looking for a drill hole in an awning. The employee stepped on the awning and fell 12 feet onto the concrete dock below. The employee suffered fractures to the right arm, right leg, pelvis, and ribs.",1
"On December 26, 2019, while retrieving mail out of a delivery point sequence rack, an employee tripped over a rack door on the floor. The employee fell backwards and landed on the floor, suffering a broken lower-back vertebra. The employee was hospitalized.",1
"An employee was on a trailer, handing scaffold sections to employees on the ground. A frame that he was holding hooked another frame, which started shifting onto him; as he jumped off the trailer to avoid it, he fell and landed on his side. He suffered a broken left shoulder and was hospitalized.",1
"An employee was adjusting the jaws on a large buck-on machine. The jaws closed on his left hand, smashing the thumb just below the knuckle.",1
"An employee fell from a plane door to the ground about 8 feet below, suffering broken ribs and lacerations to the head and face.",1
A ski instructor was skiing down a trail when she hit some unconsolidated snow. She fell and lost her skis; her right tibia was broken at the knee.,1
"An employee was on a ladder, cleaning a conveyor belt. The employee fell, suffering an injury to the left side of the body.",1
"An employee was hanging blinds from an extension ladder. The ladder slipped out from under the employee, who fell to the floor and suffered contusions.",1
"An employee was setting up a core drill with a 16-inch bit. The drill bit fell from the motor onto the employee's left hand, injuring the ring finger. The fingertip was surgically amputated.",0
"An employee was fixing a garage door. While the employee was placing a spring, it recoiled and struck the employee, causing a facial laceration and an eye injury.",1
"An employee was installing cable at a house, working from a ladder. The employee fell from the ladder to the ground about 15 feet below, suffering several fractures and brain swelling. The employee was hospitalized.",1
"An employee was working in a trench box. A backhoe, working outside the trench box, smashed the employee's left hand as it rested on the top of the box, breaking the ring finger and cutting the little, ring, and middle fingers.",1
"A produce clerk was walking in a produce department when her foot was caught in a utility water hose. She tripped and fell onto her left side, suffering a broken left leg. She was hospitalized.",1
"A delivery driver climbed onto a trailer to unhook the ratchet strap holding lumber to the trailer. When the strap released, the employee fell to the ground below and sustained back and neck injuries requiring surgery and hospitalization.",1
"An employee was cleaning out a dust collection system. The employee's flashlight fell into a chute leading to an auger system; as the employee was retrieving it, the rotating auger amputated his lower right arm.",0
"An employee was operating a threader machine. The threader bar jammed. While trying to dislodge it, the employee became trapped between the feed table and the threader machine. The employee suffered broken ribs and a lacerated liver.",1
An employee was walking into the building when she tripped on a water-soaked rug and broke her foot. She was hospitalized and required surgery.,1
"While climbing a rock wall, an employee fell 10 to 30 feet to the ground, suffering a broken right arm, dislocated left and right ankles, and broken left and right toes.",1
An employee was changing a belt on an air handler system. The belt/pulley partially amputated his little finger.,0
An employee was attempting to clear product from a meat grinder when the grinder amputated the employee's right middle fingertip. The grinder was running at the time if the incident.,1
"An employee was assembling a boom when a metal wedge fell out of the boom assembly and struck the employee on the forehead, causing a broken skull and a contusion.",1
"An employee attempted to stop a shoplifter and was punched in the face. The employee fell and struck his head on the ground, suffering a head contusion and concussion.",1
"An employee was on a step stool, cutting plastic off of boxes. She slipped off the stool and broke her kneecap on the floor. She was hospitalized.",1
An employee was using a ladder to enter the back of a trailer when he felt a pop in his calf.  He was hospitalized with a calf muscle tear.,1
"An employee was moving a ride-on concrete buggy in the snow. Its tires slipped on ice, causing the employee to fall backwards and land on a tape measure in his hip pocket. He suffered a hip injury.",1
"An employee was walking on a loading dock when a steel security barrier closed on his left foot, lacerating it.",1
"An employee slipped on mud and fell while retrieving mail, injuring her knee. She was hospitalized, requiring surgery.",1
"An employee slipped on black ice while getting out of her vehicle and landed on her knee, fracturing her kneecap. She was hospitalized.",1
An employee was picking up a bushing when it amputated the tip of his middle finger.,0
"An employee was cutting an aluminum stack band using a grinder with a fibrous chop saw blade. The blade exploded and the pieces cut his stomach, lacerating the abdominal wall and small intestine.",1
"An employee slipped and fell on black ice on the ground, requiring hospitalization for a patella fracture.",1
"The injured employee was helping install LED light fixtures on the poles at a baseball park. While a crane was resetting the poles, one of the light fixtures disconnected and fell to the ground, striking the injured employee in the head. The employee was hospitalized with a fractured skull.",1
"On December 27, 2019, an employee fell from a ladder to the floor, suffering leg injuries.",1
"An employee was removing a roll from a copper rolling process using a handheld hydraulic press. The press caught the employee's finger, pinching off the fatty part of the employee's finger.",1
"An employee was checking the fit of a pipe wrench on a rotating shaft when the pipe wrench became caught on the pipe and rotated, striking the employee. The employee then fell approximately 5 to 8 feet to the ground. The employee was hospitalized with vertebral and head injuries.",1
"An employee was using a cherry picker forklift to pull product from upper shelves. Her foot was smashed between the platform and a pallet or part of the shelving unit. The foot was crushed and she was hospitalized, requiring surgery.",1
"On December 27, 2019, at 10:36 AM, an employee threw hot water or gravy onto the injured employee's back, causing second degree burns that required hospitalization.",1
An employee fell from a semi cab while climbing out.,1
"An employee was demolishing an interior masonry wall in a school locker room. The ceiling collapsed, trapping the employee, who suffered broken ribs. The employee was hospitalized.",1
"An employee was on a 6-foot ladder, working on a light fixture. The employee came into contact with a live wire and fell to the ground, breaking a rib on his left side.",1
"An employee was descending a stairway when her foot and knee twisted, causing her to fall forward.  Two other employees prevented her from falling to the ground, but she suffered a torn right meniscus and a torn ligament in the left ankle.",1
An employee was working on an HVAC on top of a roof when the employee fell 25 feet through the skylight to the floor below. The employee was hospitalized for broken bones.,1
"An employee was in a truck, retrieving an item for delivery. As left the truck, he tripped off the lift gate and fell 2 or 3 feet to the ground. His left leg was broken.",1
"An employee was running a load tiering device. As the employee was trying to remove a piece of strap that was lodged or caught in the machine, the forks caught his right hand. He suffered a broken middle finger and lacerations to the palm and back of the hand. He was hospitalized, requiring surgery.",1
An employee was shot in the back and stomach while delivering mail.,1
"An employee entered the workplace and slipped on the wet restroom floor, fracturing her right hip and neck.",1
"An employee was standing between two vehicles when a forklift struck one of the vehicles. The employee's leg was then pinned between the two vehicles, suffering bruising that required hospitalization.",1
An employee was changing the filter on a brake press and used a ladder to access the top of the press. The employee fell from the ladder approximately 6 feet and struck his head on the press frame. The employee was hospitalized with a concussion and an open head wound.,1
An employee had been using a slicer to cut deli meat. The employee slipped and fell on meat slices that were on the floor. The employee was hospitalized with a chest injury and a hernia injury in the stomach.,1
"Two employees were moving a pallet onto a conveyor when the pallet fell onto the floor, deeply lacerating the injured employee's left middle finger.",1
"An employee was working on a truck at a fuel station when the truck back-fired and ignited the gasoline vapors, causing second degree burns to both of the employee's arms.",1
An employee was removing stuck product on a mesh conveyor when his left ring finger was caught in the mesh. The fingertip was amputated.,0
"An employee was on a service call to a shop when a semi tire ruptured and pushed the employee back, breaking ribs.",1
"An employee had an allergic reaction to peanuts while eating lunch, requiring hospitalization.",1
An employee dropped a syringe and sustained a puncture wound to the foot.,1
"On December 29, 2019, an employee inhaled cleaning chemicals while cleaning a toilet, experiencing shortness of breath, nausea, and coughing. The employee was hospitalized.",1
An employee had been stocking freight and baking and suffered a heart attack while on break.,1
An employee slipped on the floor and fractured an ankle while rigging a blender unit.,1
An employee was delivering a 46-pound parcel when she suffered a hernia. She was hospitalized.,1
"An employee fell from a rolling ladder while operating a valve, landing on a concrete surface about 4 feet below. The employee suffered a broken left femur and a dislocated right elbow and was hospitalized, undergoing surgery.",1
"An employee's leg broke at the top of a step while delivering mail, requiring hospitalization and surgery.",1
An employee had assisted a customer to load several bags of concrete into the bed of her truck. The employee was found unresponsive and was hospitalized for a possible heart attack.,1
An employee was cutting frozen pork with a bandsaw. The sawblade lacerated his right hand and partially amputated the thumb.,0
"An employee was cleaning the restroom when the employee slipped and fell on the partially wet floor, breaking the right hip.",1
An employee was repairing the cover for a control panel button. The employee received a 340-volt shock and was hospitalized.,1
"An employee was walking down stairs when he reached the bottom step and his legs buckled. He leaned against the handrail and rolled to the landing approximately 12 inches below, tearing a ligament in his right knee. He was hospitalized.",1
"An employee was welding on an excavator bucket when the bucket fell from its stand and crushed the employee's right foot big toe, fracturing it.",1
"An employee was using a 24-volt battery-powered drill to drill into a plastic vault used for telecommunication equipment when the glove on his left hand was snagged by the rotating drill bit. As a result, he suffered a partial amputation to the ring finger on his left hand with a small amount of bone loss.",0
"An employee was rolling a 10-inch pipe on a pipe rack when another 10-inch pipe fell on his left hand, crushing it.",1
"An employee was working in an office setting when she stepped onto a paper cutter that was on the floor. The paper cutter lacerated a tendon in her left foot, requiring hospitalization and surgery.",1
An employee was cutting wood for truss assembly using a radial arm saw. The employee had a seizure while operating the saw and the tip of his left thumb was amputated.,1
"On 12/30/2019, an employee was working inside an aerial lift to install metal siding onto the exterior of a new construction addition when the employee received an electrical shock from a 7,500-volt electrical transmission line. The employee suffered second and third degree burns.",1
"An employee was using a handheld pry bar to lift/remove a floor drain grate. The employee had the pry bar in the grate and was applying pressure to pop it out while reaching his right hand under the grate end to help lift it. The pry bar then slipped out and onto his right index finger, pinching it. He reacted by pulling his gloved hand out, which resulted in a right index fingertip amputation.",0
"An employee was standing on a 4-foot step ladder, using a hand drill to screw in a telecommunications cable anchor, when his foot slipped between two rungs, causing him to fall. He suffered a leg injury to the quadricep muscle and tendons.",1
"On December 30, 2019, an employee was beginning to thread a write through a machine when the employee stepped into a cooling tank, suffering a leg burn that required hospitalization.",1
"On December 30, 2019, an employee was getting a roll of paper towels from a  pallet when, as the employee stepped backward away from the pallet, the employee's left heel became caught on a loose bit of shrink wrap around the bottom of the pallet. The employee then fell backwards and fractured the right femur, requiring hospitalization.",1
"An employee was bending over to pick up a box when he lost his balance and fell to the floor, hitting his head and hip. He suffered a fractured femur.",1
"An employee fell from a ladder, and a drywall metal packing lacerated his elbow during the fall.",1
"A boiler operator was sitting on a bucket, watching the boiler feed system. He fell while standing up, landing on the floor and breaking his left hip.",1
An employee suffered a severe injury to a gluteus muscle while carrying an altar up a stairway.,1
"While investigating a jammed machine, a maintenance worked suffered an amputation of the left thumb.",1
"On December 31, 2019, an employee was sprayed with hot water/caustic solution when a pipe cap clamp loosened, spraying his back with the cleaning solution in a tank. He sustained first and second degree burns.",1
"An employee was manufacturing a de-panner using a handheld grinder. The grinder's wheel exploded, lacerating his right middle finger and ring finger. The middle finger was medically amputated at the second knuckle.",0
"An employee was walking through a parking lot. She slipped on ice while stepping off a curb and fell to the pavement, breaking her right ankle.",1
An employee tripped and fell over a step while entering a building. The employee suffered a left-side pelvic fracture.,1
"An employee was caught between the front of a telehandler and a crane winch that was resting on the ground, resulting in a crushing injury to his chest.",1
"An employee slipped on ice when walking across a roof and suffered a broken tibia and fibula. The employee was hospitalized, requiring surgery.",1
"A braided stainless steel hose (about 1 inch in diameter by 1 foot long) between fixed piping and the discharge side of a compressor on an odorant delivery truck ruptured. Debris from the ruptured hose struck a Chevron Phillips employee on the left side of the face. The employee was hospitalized, undergoing eye surgery.",1
"An employee slipped on ice on the floor next to an ice maker. The employee fell to the floor, suffering a broken hip.",1
An employee was using a winch and a cable when his hand was caught between the winch and a truck frame. The employee suffered an amputation.,0
"An employee was working from a barge, stabilizing a pier. While the employee was removing dunnage, the employee's left middle and ring fingers were caught between an H-beam and a steel plate. The ring fingertip was surgically amputated.",0
"During drill rig set up, a raised piece of drill pipe slipped out of the pipe stop housing that keeps the pipe from moving when placed in the upright rack and an employee's left thumb was caught and crushed between the pipe and the housing. The employee was hospitalized for surgery.",1
"An employee was reaching into the second level of a rack to cut a strap on product. A bundle of pipes on the first level of the rack rolled off and struck the employee's right foot, breaking bones.",1
"An employee was cutting down a tree as part of a land clearing operation. He was walking away from the tree after his cut when the branches struck him, breaking his elbow, ribs, and knee.",1
"An employee was up in a lift, looking at a conveyor belt to find its serial number. The machine was turned on and the belt broke his left middle finger and removed the skin. He was hospitalized, undergoing surgery to amputate the fingertip.",1
"An employee was trying to remove a piece of stuck bark debris from a conveyor system. The conveyor caught the employee's left hand, lacerating the thumb and possibly amputating the index fingertip.",0
"An employee was welding under a truck. A spark landed in a puddle of brake cleaner, which caught on fire. The fire spread to the employee's pants leg, burning his right calf.",1
"An employee was using a box cutter to open a 5-gallon bucket of paint. The knife slipped and cut the radial artery in his left wrist. He was hospitalized, undergoing surgery.",1
An employee cleaning a truck tripped over a salt pile and broke their right hip. The employee was hospitalized.,1
"An employee slipped on black ice near a stairwell. She fell, her right side striking the parking lot pavement, and suffered possible fractures to the wrist and hip.",1
"An employee fell from a ladder while climbing down it, landing on the ground and suffering a broken hip.",1
"A ski patrol employee was performing trail checks. The employee's ski caught a patch of ice and the employee fell backwards, suffering a broken left knee.",1
"An employee was removing a power cord from an aircraft. As he was descending the ladder, he fell to the ground and suffered two broken bones below the knee. He was hospitalized, undergoing surgery.",0
"While decking a metal roof, a worker tripped and fell to the ground about 14 feet below. He was hospitalized with a fractured arm.",1
"An employee was handing mail to a customer when a dog attacked her, biting off the top part of her right middle finger.",1
"On January 2, 2020, an employee was removing pallets from a box truck when a pallet caught on something and the employee had to jump out of the back of the truck rather than fall. He landed on both feet, breaking his right ankle and left tibial plateau.",1
"An employee was operating a powered industrial truck lift when the employee fell from the elevated lift and suffered head, back, and neck injuries. The employee was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee was skiing with a client. Her ski caught a branch and she fell, breaking her left leg.",1
"An employee fell while exiting a tractor, landing on the ground about 4 feet below. He suffered a torn quadriceps muscle and was hospitalized, undergoing surgery.",1
"An employee was walking backwards when he tripped and fell to the floor, fracturing his wrist as he tried to catch himself. He got up, became dizzy, and fell a second time, hitting his head on the floor and fracturing his skull.",1
An employee was operating a forklift when it ran into a steel barricade. The employee suffered a broken left leg.,1
"An employee fell to the floor while walking into a patient's room, fracturing vertebrae and requiring hospitalization.",1
An employee was packing boxes when a small package conveyor disconnected due to loose bolts and hit her thighs. She suffered temporary paralysis in both legs and a swollen muscle.,1
"An employee was screwing a metal treaded stud into plastic. The employee's gloves became entangled with the stud, causing an injury to the right middle finger. The finger was medically amputated down to the first joint.",0
"An employee was in an aerial lift's operator seat, lowering the lift to the ground. The lift titled and ejected the employee, causing head injuries.",1
"An employee was carrying a flowerpot through a store. His right leg caught on the leg of a shelf and he fell to the floor, breaking his right femur.",1
A forklift operator unloading pallets on a semi truck. The truck drove off while the employee was in the back of the trailer; the employee was flung out and suffered trauma to the head and neck.,1
"An employee was walking around a semi trailer. The employee slipped on black ice and fell to the ground, suffering a broken ankle.",1
"An employee was using a powered hand truck to move scrap from a cutoff area to a foundry. The employee's left little finger was rammed into a wall and sustained an open fracture, with amputation of the fingertip.",0
An employee was performing service and maintenance on conveyor line equipment when the employee's left arm entered an area of the moving conveyor system and was amputated at the elbow.,0
"An employee slipped on ice while walking from their vehicle to the store, falling and suffering a broken left femur.",1
"An employee was walking to a locker room restroom. He tripped and fell, and his face struck a steel column with a latch mount for a fire extinguished. He suffered a facial fracture with damage to the eye area.",1
"While unloading branches from a trailer, an employee tripped and fell onto a stump. The employee broke two ribs and suffered partially collapsed lungs.",1
"An employee was getting on a ladder to come down from a metal roof. The ladder slipped and fell from under him, and he fell to the ground. His cheekbone was broken.",1
"Lifting a bag of animal feed exacerbated an employee's hernia. The employee was hospitalized, requiring surgery.",1
"An employee was climbing up a ladder with a rope on his shoulder when the ladder slipped and he fell backwards about 20 feet to a lower level roof, suffering fractured vertebrae.",1
"An employee fell in a kitchen, striking her head on the edge of the counter and then the floor. She was hospitalized, having suffered a head injury.",1
An employee was cutting wood on a bandsaw. The blade severely lacerated the employee's left thumb at the second joint.,1
"An employee was on an extension ladder, changing a ballast. The employee fell from the ladder to the workroom floor about 12 feet below, suffering three broken ribs.",1
A forklift struck an employee's left ankle as it backed up.,1
An employee was felling dead ash trees when an adjacent ash tree fell and struck his head. He was hospitalized with a fractured spine.,1
"An employee was doing maintenance on an air handler machine. A part in the machine, still rotating after the power had been shut off, amputated part of his right ring finger and lacerated his little finger.",1
"An employee was walking down a hallway when she tripped on a wrinkled rug, fell to the floor, and suffered a back injury. She was hospitalized.",1
An employee was loading a debris truck. A 2-by-4 got stuck in the hopper; the employee was guiding it into the truck when it caught his hand against the wall. His left index finger was amputated at the first joint.,0
"An employee was standing between two trucks, helping transfer cargo from one truck to the other. One of the trucks moved and the employee's leg was caught and broken between the two trucks.",1
"An employee fell while descending a ladder, landing on the ground 3-4 feet below and suffering a rotational fracture to the tibia and fibula.",1
"An employee was servicing an elevated heating unit. The platform the employee was standing on came loose and the employee fell to the floor, suffering a broken right arm and a head injury.",1
"An employee was using his hands to push and slide a paper roll onto the forks of a forklift when the operator inadvertently hit a button in the cab and the forks started to raise, causing the roll to move towards the employee. The employee began to run/jump out of the way when the roll struck the employee and pinched his leg against a second roll that was sitting on the floor behind him. He suffered a left fibula fracture.",1
"An employee was removing a temporary water line when hot water spewed out, causing second degree burns to the employee that required hospitalization.",1
An employee was conducting an inspection on a finger car where the kiln is located. He slipped while descending from the rack shelf frame and fell 10 feet to the floor. He was hospitalized with a fractured left wrist and lumbar.,1
"An employee was performing maintenance on tongs when the tongs engaged, amputating the employee's right index fingertip.",0
An employee was repairing an assembly machine. The turntable activated and his arm was trapped in the machine and broken.,1
A maintenance employee was moving boxes and items out of the way at a client's location to gain access to an air conditioning unit when a paper cutting machine with a swing blade attachment fell and cut the employee's right index finger. He was hospitalized and had skin graft surgery.,1
"A mechanic was using a truck jack to place a wheel ramp under a tire. The tire blew out and the jack broke loose, striking his side and back. He suffered a fractured rib and a punctured lung.",1
"An employee had finished checking on an alarm in the master bedroom. He then walked down stairs, missed the bottom step and fell to the ground, suffering a head contusion.",1
"An employee was adjusting racking when the employee's right index finger was crushed between an upright and a horizontal beam, resulting in a partial traumatic amputation of the right index finger through the phalanx.",1
"An employee was cleaning excess dough from a dough machine's rollers. The employee's hand was caught between the feed roller and the roller die, causing a fingertip amputation.",0
"On January 3, 2020, a press room operator developed blisters and a rash after washing their hands with a cleaner over an extended period. The employee was hospitalized.",1
"An employee was attempting to deliver a package when two dogs charged at the employee after the homeowner opened the door. One of the dogs bit the employee's left ankle, injuring the Achilles tendon. The employee was hospitalized and had surgery.",1
"An employee was working at a residential home. While ascending a ladder outside, the employee fell around 9 feet to the ground, requiring hospitalization for a possible rib injury and a collapsed lung.",1
An employee was closing a kitchen drawer. The drawer caught her left index finger.,0
"An employee was unloading a small aircraft when the employee lost balance and fell 4 feet, requiring hospitalization for possible hand, wrist, and spinal fractures.",1
"A window washer was on the roof of a building, preparing to start washing windows. When he attempted to plug a rig into an outlet, he received an electrical shock, afterward suffering numbness to an arm and a headache.",1
"An employee had finished cutting a round metal ingot with a saw. The employee went to move the scrap piece and it fell/sank down into a bed of mechanical rollers. The mechanical rollers are normally used to remove the scrap piece out of the way so the piece can be lifted by a crane. The employee then attempted to manually move the scrap piece by pulling it off of the mechanical rolls. The piece was too heavy and rolled backwards towards the ingot. The employee's left middle finger became trapped/pinched between the ingot and scrap piece, resulting in a fingertip amputation.",0
An employee was preparing to cut fabric with an electric cutter. The cutter amputated the pad of his left middle finger.,1
"On January 3, 2020, an employee was attempting to unjam a de-palletizer machine when the machine amputated the employee's left middle finger at the first knuckle.",1
"An employee performed a roof security check and then started descending a ladder from the roof. The employee was attempting to step down while approximately 4 feet off the ground when the employee lost balance. The employee then jumped down and landed on their feet, fracturing both tibias and requiring hospitalization.",1
"An employee was guiding a bundle of box channels/tube columns toward the ground. His left hand was on the bundle when it shifted, causing his left hand to become pinched between two pieces of steel. His left hand was lacerated.",1
"An employee was working underneath a vehicle on a lift to remove a suspension bolt when he lost his footing and fell to the floor, fracturing his tibia and fibula. He was hospitalized.",1
"On January 3, 2020, employees were hanging connections when the injured employee's right middle finger was smashed between two iron bar joists after the load came down. The employee's right middle fingertip was medically amputated.",0
"On January 3, 2020, a press operator was using the press machine on the draft gear line and a welder was observing the press operator insert pins into a draft gear. The pins were not correctly inserted into the draft gear and the welder attempted to insert the pins properly. The press machine cycled, pressing down on the draft gear, and the welder's hands were pinched between the pins and conveyor guide rail, resulting in amputation of the left index fingertip and a laceration to the right pinky finger.",0
"An employee was reattaching a customer's tire to the rim using a tire mounting machine. His right little finger was caught between the rim and the machine, and the fingertip was amputated without bone loss.",0
"An employee was unloading a grocery truck. He fell from a platform lift to the concrete floor about 4 feet below, suffering a broken right arm. He was hospitalized.",1
"An employee was using stilts to hang drywall when he fell to the ground, fracturing his right knee and requiring hospitalization and surgery.",1
"An employee was using a planer when it became jammed. He was attempting to unjam the equipment when his right hand made contact with the top of the planer head, amputating his fingers and mangling his hand. The planer was running at the time of the incident.",0
"A maintenance employee was attempting to tighten a friction belt with an Allen wrench on a wrapper machine when the employee's hand was caught in the friction belt, resulting in lacerations to the right index and ring fingers.",1
"On Friday, January 3, 2020, at approximately 10:50 AM, an employee was troubleshooting an injection molding machine. With the machine locked out, the employee reached into the molding area of the machine and manually pressed against the mold-closing mechanism. The mechanism closed and caught his right pinky finger, resulting in a first digit amputation.",0
"An employee fell from a 6-foot ladder, suffering three broken ribs and a punctured lung.",1
An employee working in the dishwashing area of the kitchen tripped or slipped and fell striking her left knee on the concrete floor. The kneecap was fractured and the employee was hospitalized for surgery.,1
An employee was hospitalized for an injured thumb.,1
"An employee was stocking freight on shelves from a ladder when the employee slipped and fell off the ladder, suffering a broken hip and cuts to the arm.",1
An employee was on a ladder installing cable when he fell off the ladder and fractured his skull.,1
"An employee was attempting to remove trash bags from the top of a truck. The employee fell from the top of the truck to the ground, suffering a broken right foot.",1
"On January 3, 2020, an employee was working on the singlefacer to troubleshoot a quality issue with the machine. A singlefacer is an enclosed machine that forms a corrugated shape in a sheet of kraft paper and bonds it to a sheet of flat linerboard using a starch-based adhesive. While removing bolts from the steam chest, the chest unexpectedly dropped and released hot water onto the employee's chest, arms, and legs. The employee was hospitalized for burns.",1
"An employee was greasing a fillet machine when the employee's right index finger was caught in the machine, resulting in a fingertip amputation.",0
"The injured employee was training another employee, watching the second employee conduct a pump swap. The expansion joint fitting failed during the swap and caustic lime solution sprayed about 10-15 feet, hitting the injured employee. The employee suffered chemical burns to the leg, torso, and left eye and was hospitalized.",1
An employee was removing a shred cooker lid. The employee's left middle finger was pinched between a spud wrench and a railing; the fingertip was amputated with no fracture or bone loss.,0
"An employee climbed up stairs to a tank gauging platform, accessed the tank to be gauged, cracked the gauging hatch to let it vapor off while standing upwind, and gauged the tank twice. During the third gauging effort, the employee was exposed to hydrogen sulfide (H2S). He was hospitalized for upper respiratory tract irritation, dizziness and disorientation.",1
"An employee slipped while descending stairs on a drill rig, falling and breaking his ankle.",1
"An employee was on a ladder getting boxes down from shelves when the employee fell from the ladder to the floor, suffering an ankle injury.",1
"While stocking products in an aisle, an employee was descending a rolling ladder carrying a box when she missed the second step from the bottom and fell forward, catching her right foot on the bottom step and then impacting the floor. She was hospitalized and required surgery for a right lower leg/ankle fracture.",1
"An employee was adjusting a film roller in a vacuum forming machine. The employee was pulled into the machine, and all four fingers and part of the thumb on the employee's left hand were amputated.",1
"An employee was walking behind another employee who was pulling a pallet jack when he tripped on the pallet jack and fell on the concrete floor, fracturing his hip.",1
"An employee was helping to move a piece of equipment out of the plant with a team of people. While moving the object that was controlled by other employees, the employee was positioned between the edge of the dock and the machine. He dismounted from the dock to reposition himself. When his feet struck the ground, he broke both heel bones.",1
"An employee was reorganizing a shed when a grill slipped and fell on his right foot, breaking the first and second toes.",1
"On, January 6, 2020, an employee was unloading a steel delivery of 15' 9'' long ""I"" beams. After the steel was taken off the truck by a forklift, it was set down on two A-frames and rolled to a storage location by two employees. There was one employee on each A-frame. The steel on the A-frames was on uneven ground near a curb and sewer drain while the employees waited for help to remove it from the A-frames and place it on the ground. While waiting, one employee walked in between the A-frame and sewer grate, which is slightly pitched for drainage, placing one foot on the curb and the other on the grating with his back to the steel beam. The A-frame slowly started moving down toward the grating. Once the front wheel of the A-frame hit the grating, it tipped over, causing the steel beam to roll toward the ground and land on the employee's leg, knocking him to the ground. He suffered a broken ankle and was hospitalized.",1
"An employee slipped and fell on a wet floor while walking to punch out, suffering a fractured hip.",1
"An employee was concrete form stakes with a circular saw. The sawblade hit a piece of the sawhorse table, causing the saw to jump back and cut the employee's left middle finger (including tendons and bone). The finger was amputated to the first knuckle; the employee was hospitalized, undergoing surgery.",1
An employee fell to a laboratory floor while trying to sit down on a wheeled chair. The employee suffered a broken left hip.,1
"An employee was performing a preventive maintenance check on a machine when the employee's right index finger was caught in a running chain, resulting in a finger amputation.",1
"An employee was walking to his work station when he tripped on a pipe assembly and fell to the ground, suffering a spinal compression injury.",1
"An employee was attacked by a dog during a home health visit, suffering lacerations to the face, arm, and leg.",1
"An employee was adjusting the orientation of a 300-pound cast metal part while it was on the floor in a sling. The part shifted and pinched the employee's left middle and ring fingers against the sling, causing the amputation of the middle fingertip and an avulsion on the ring finger.",0
"An employee was driving a car when he was involved in a car accident, resulting in a leg amputation.",1
"While walking to his car, an employee tripped going down stairs and fell to the ground, breaking his neck.",1
"On January 6, 2020, an employee was adjusting the weights on a mechanical press when the employee's left thumb was pinched between the wheel for the weights and the table on the press.  The employee suffered a traumatic amputation of the left thumb and was hospitalized.",1
"An employee was removing meat from a meat tenderizer. His gloved left hand was caught by the machine and carried through its teeth, where it was crushed and lacerated. He was hospitalized.",1
"An employee was lifting an engine attached to a pallet out of a flatbed truck using a hydraulic hoist when the chains connected to the pallet and engine slipped, allowing the engine and pallet to roll toward the employee. The pallet with the engine struck him, tearing open his left arm and pushing his left knee sideways, causing tendon damage. He was hospitalized and had surgery.",1
"An employee was walking from the rear of his truck to the cab when he slipped and fell to the ground on his knees, dislocating his quad muscle.",1
An employee was using a hand tool to work on a Velcro strip for his truck when the tool punctured his right index finger and he fainted. He was hospitalized and had surgery.,1
"An employee was dumping an 8-yard rear-load container. A piece of furniture was caught between the scraper blade and the hopper seal. When the blade came down, it kicked the container off the truck and into the employee, who suffered bruising to the kidney, spleen, and liver, as well as possible fractures to ribs and/or vertebrae.",1
"An employee was loosening a cargo strap when the tightening mechanism struck his right index finger. The finger was crushed and he was hospitalized, requiring surgery.",1
"An employee was changing a power cable for an electromagnetic crane when he was struck by the crane's H-link, fracturing his right arm.",1
"An employee was dismantling a scaffold. The employee fell through a floor opening to the concrete 14 feet below, suffering injuries to the brain and ribs.",1
"An employee was backing up an electric pallet jack. The employee's left elbow was caught between the pallet jack's handle and a rolling stairs stand, causing trauma to the forearm.",1
"An employee was performing chicken leg deboning when his knife slipped out of his hand and stabbed his abdomen, lacerating it.",1
"An employee was aligning a board as it traveled along a roll case conveyor when the board pushed his right hand against the side of the conveyor angle iron, resulting in lacerations and a fracture to the right index finger knuckle.",1
"An employee was cutting banding around a steel pipe when the pipe rolled off the rack and struck the employee's right leg, fracturing the tibia and fibula.",1
"An employee tripped on a hallway rug, falling to the floor and suffering a broken left leg.",1
"An employee was laying decking when he lost his footing and fell approximately 10 feet to the ground below, breaking his left wrist.",1
An employee was repairing a transport platform and removing an exit gate from the platform when a spring struck and fractured the employee's right thumb.,1
"An employee was installing a steel beam and using a dolly to support and move the beam. The dolly was approximately 5 feet off the ground when the beam fell off the dolly and landed on the employee's right foot, breaking three toes.",1
An employee tripped and fell requiring hospitalization.,1
"An employee was loading rolls of paper into a machine and crushed their right thumb, index finger, and middle finger in the machine.",1
"An employee was working on a utility line installing new equipment. The employee was attempting to change the battery on an impact gun when the employee's left hand contacted the tail of the conductor, causing electrical burns to the hand. Gloves were not worn at the time of the incident.",1
"An employee was clearing jammed boards on a conveyor. The conveyor chain caught the employee's hands, causing the amputation of four fingers on the left hand and two on the right hand.",1
"An employee was using a compound miter saw to cut a piece of pine when the saw blade contacted his left hand, resulting in an amputation to the thumb and index finger.",1
"An employee was performing maintenance checks on the tail rotor of a helicopter. While on the ladder doing visual inspections, the employee fell 6 to 8 feet, landing on the ground. The employee suffered fractured ribs, a fractured pelvis, and a fractured left arm.",1
"An employee was adjusting a pallet on a forklift's forks. The employee's right index finger was crushed between the forks and the pallet, causing its amputation.",1
"While spotting a crane, an employee tripped on laminate timber mats and fell to the ground, suffering face, head, neck, and back injuries.",1
An employee was struck on the lower leg by an ingot that fell from a crane. The employee's right lower leg was fractured.,1
"An employee used a sit-down forklift truck to load a 4 ft. x 4 ft. x 4 ft. tote filled with scrap onto a flatbed truck. The flatbed truck was backed up to the dock and was slightly lower than the dock. As the forklift was being driven down the dock plate, the flatbed truck rolled forward about 7 or 8 feet. The forklift fell and hit the ground in the upright position. The employee jumped out the left side of the forklift, landed on his left side, and rolled onto his back side, suffering multiple injuries, including a fractured left hip, shoulder injuries, a left elbow injury, and a head injury.",1
"At 3:54 a.m. on January 7, 2020, an employee was preparing to clean an auger that fed the mixers on a production line. His left hand came into contact with an adjacent, moving auger, which amputated about 1/2 inch of his left thumb. He was hospitalized.",1
"An employee was descending a short ladder underneath a conveyor when he lost his balance and his right hand entered the in-running nip point of the conveyor, resulting in amputations to part of the first and second fingers.",0
"An employee was stacking bread on a conveyor when the employee's left hand made contact with an unguarded chain on the conveyor, resulting in a partial amputation of the left ring and middle fingers.",0
"Employee was walking from her car to the building when she slipped on ice in the parking lot and impacted the ground, breaking her hip.",1
"An employee was walking in the parking lot when she slipped on ice and fell to the ground, striking her head.",1
An employee was descending a 4-foot ladder when he fell to the ground and his legs became twisted in the bottom two rungs. He suffered a fracture to the right ankle that required hospitalization and surgery.,1
"An employee was on a 10-foot step ladder drilling into concrete with a hammer drill when the employee fell from the eighth rung to the ground below, suffering a hip injury.",1
"An employee was reaching for a broken piece of lumber that was hung up on a board edger's infeed chains. His right hand was caught between two cants (or a cant and part of the machinery); the hand was lacerated and the index, middle, ring, and little fingers were broken.",1
"After pulling a 36-pound skid into place and then repeatedly moving 14-pound boxes, an employee suffered a muscle tear in the lower right abdomen. She was hospitalized.",1
"An employee was installing a brake part on a refurbished rail car. The employee fell from a 4-foot ladder to the cement floor, suffering head injuries and losing consciousness. He was hospitalized.",1
An employee was pulling a cart with 140-pound equipment down a wet ramp when she slipped and fell. The cart then struck her ankle and dislocated it.,1
"Two employees were performing a pre-trip inspection on a dump truck. While one employee was checking the fan belt, the second employee started the engine. The first employee's hand made contact with the moving pulley and fan belt, amputating the left index and middle fingers.",0
"An employee was part of a crew clearing land and moving a downed tree when a branch on a felled tree broke and snapped back, striking the employee. The employee suffered severe back and knee injuries and was hospitalized.",1
"An employee was installing a new rail and bracing himself on a railcar when the suspended rail struck his left middle finger, resulting in an amputation above the first knuckle.",1
An employee in a kitchen prep line suffered a laceration to the forehead when another employee stabbed him with a kitchen knife.,1
"An employee was clearing a piece of wood from the infeed of a dryer. A sprocket caught his jacket, and the chain and sprocket abraded and burned the bottom and underside of his right upper arm.",1
"An employee fell through a roof while installing decking and was hospitalized for a fractured skull and pelvis, a brain bleed and a laceration to the right elbow.",1
"An employee was unloading rolls of insulation from the back of a flatbed trailer when a roll struck the employee, causing him to fall off the truck to the ground. He suffered broken ribs, a broken back, and a potential brain bleed.",1
"While holding a door open and trying to push a cart through, an employee suffered a hernia.",1
An employee was pumping concrete when the employee's hand entered the concrete pump and sustained an injury.,1
An employee was on a fixed ladder in an elevator pit performing elevator testing and maintenance when the employee slipped on the third rung and fell 3 feet. The employee was hospitalized with a knee injury and fractured tibia.,1
"An employee was painting on a ladder in a stairwell. The employee reached to paint a pipe and the ladder gave way. The employee fell approximately 5 feet and struck the stair railing on the way down, sustaining a fractured wrist and cuts to the front and back of the head.",1
"An employee was removing the safety strut on a dock leveler when the clamp on the crane slipped, allowing the dock leveler to fall on the employee and drive him to the ground. He cut his ear and broke his leg.",1
An employee was assembling a wood crate using a pneumatic staple gun when the staple gun's safety mechanism pressed against the employee's thumb while he simultaneously depressed the trigger. The staple released into his thumb and he required hospitalization.,1
"An employee was resetting film on a laminator after a breakout. The employee's gloves were caught in the bottom roller; the roller pulled in his hands, causing contusions to both hands and his right arm.",1
An employee suffered a head injury while skiing.,1
An employee was lifting a part with an overhead crane when the part dislodged from the rigging system and moved toward the employee and fractured the employee's hip. The employee was hospitalized.,1
"On January 07, 2020, an employee was removing the metal sheeting of a 1:12 pitched roof while using his personal fall protection. He was anchored to the peak of the roof when he stepped back while pulling a metal sheet and fell head first through a skylight about 16 feet to the concrete floor below. He suffered head trauma and was hospitalized.",1
"An employee came off a ladder and then fell down the steps, breaking a shoulder and wrist.",1
"An employee was installing an adapter plate into a mill stand when the employee's left middle finger was caught between the base of the stand and the 400-pound adapter plate, breaking his finger.",1
"An employee was pulling product and placing it on a pallet, which rested on an electric pallet jack. The employee's leg was pinned between two pallet jacks, and the employee's tibia was broken.",1
"An employee was low-voltage wiring HVAC equipment located under a raised floor. While attempting to de-energize the equipment, the employee's hand touched a live hot leg, receiving an electrical shock and burns to the left-hand fingertips. The employee was hospitalized.",1
"At about 2:15 a.m. on January 8, 2020, an employee was wiping down a coil of titanium with a rag before it went into a machine. The rag got caught and the employee's finger was pulled into the machine and partially amputated.",0
An employee was cleaning a stove and then went to the sink to rinse the cloth in a resident's home. The employee turned to return to the stove and her foot became caught on something on the floor. The employee fell on her right side to the level floor and sustained a broken lateral rib on her right side.,1
"A part jammed in the track of the thread roller on a piece of machining equipment. An employee removed the access cap to get the jammed part. Once the part was removed, the load shuttle moved horizontally and contacted the employee's right middle and index fingers. The middle finger was partially amputated.",0
An employee was changing into her work uniform in a locker room when she had a suspected allergic reaction to peanuts.,1
"An employee tripped while stepping off a 12-inch-high workstation and fell to the floor, suffering a broken right hip.",1
"On January 8, 2020, at approximately 3:15 a.m., an employee was setting up a print press when the employee attempted to clean the print rollers. The employee's glove was pulled into the machine's rollers, crushing the employee's right hand. The employee sustained four broken fingers and the amputation of the pointer, middle, and index fingertips. The machine was running at the time of the incident.",1
An employee suffered breathing problems and a burn to the lungs while extinguishing a fire. The employee was hospitalized.,1
"On January 08, 2019, an employee was operating a beading machine that seals metal tubes for HVAC ducting parts when his glove was pulled into the beading section of the machine (wheels that bead the metal), resulting in the amputation of his left middle and ring fingers from the first knuckle.",0
"An employee fell while exiting a truck, landing on the ground about 1 to 1 1/2 feet below and suffering a broken hip.",1
An employee was removing a straw from a wrapper machine. The machine partially amputated the employee's right index finger.,0
An employee was exiting her vehicle when she slipped on ice and injured her tibia and fibula.,1
"While removing objects from their car at a client's home, a home health care employee was stabbed in the stomach with a knife.",1
"An employee was climbing a ladder that was approximately 27 feet high to the second roof of a commercial building when the employee slipped at the top of the ladder and fell from the second roof to the top of the first roof. The employee broke both ankles, the left tibia, and a heel.",1
"An employee was clearing a sponge that had become stuck in a pneumatic bench-mounted launcher. The employee's hand got entangled in the machine's piston, causing a fingertip amputation.",0
An employee fell while walking on a wet pool deck to enter a locker room.,1
"An employee was walking through a swing gate when it hit her from behind, causing her to fall forward and break her right hip.",1
"After repairing a roof HVAC unit, an employee was descending a ladder when it became displaced. The employee then fell 15 feet to the blacktop driveway below, suffering a broken left wrist, fractured left elbow, two fractured left ribs, a compound fracture of the back, a lacerated kidney, and a fractured pelvis.",1
"An employee suffered from dizziness, head pressure, fatigue, soreness, and chest pains while conducting abrasive blasting operations.",1
"An employee was walking to a curb when she fell at a hole in the concrete sidewalk. She landed on the sidewalk and suffered a broken right arm. She was hospitalized, undergoing surgery.",1
An employee was shot in the leg while delivering pizza to a residence.,1
"An employee was working on a lathe, which caught and broke the employee's thumb.",1
"An employee was trying to remove debris from a gang saw. He bent over and the wood became dislodged, hitting his face. He suffered a facial laceration requiring stitches, a concussion, and a nasal bone fracture.",1
"An employee was conducting a pipe laydown operation. An elevator struck a mast, kicking the pipe out so that it struck the employee in the face. The employee was hospitalized.",1
An employee was struck in the head by a boom from a buggy during trenching operations for pipeline construction.,1
"An employee was working on a flatbed truck while tying merchandise when he fell approximately 4 feet from the truck to the ground, suffering head trauma.",1
"An employee was de-burring a part in the lathe while it was rotating using a sand paper strip. The employee was pulled into the lathe, suffering a fractured right arm and lacerated right thumb.",1
"An employee was driving a truck when it caught fire. After pulling it over and using a fire extinguisher, she suffered from smoke inhalation and was hospitalized.",1
"An employee was helping to connect a container dumpster to a roll-off truck when another employee engaged the hook lift system of the truck. The employee's left foot was then caught between the metal hoist rails of the truck, causing deep lacerations to the left foot and the first and second toes.",1
"Two employees were repositioning an extrusion press's tail stretcher. The head stretcher was moved closer to the tail stretcher while one employee's right hand was on the material flow table. His little finger was pinched between the metal and the table, suffering an amputation.",0
"An employee was descending a ladder, slipped and fell approximately 10 feet off the ladder. The employee suffered a broken wrist.",1
An employee was removing a jammed box from a conveyor. His finger was caught and crushed between a roller and the box.,1
"An employee was performing housekeeping duties when she was exposed to the smell of perfume, causing her to experience shortness of breath and an asthma attack. She was hospitalized.",1
"An employee was unloading a laser machine onto a cart when wind blew fibers off the machine/cart. The employee pressed the brake on the cart, retrieved the fibers, and took them inside the building. When the employee returned for the cart, it was rolling toward cars in the parking lot. The employee chased the cart and ran into a concrete barrier and fell, suffering a fractured right hip and right elbow injury.",1
An employee fell while walking across loose dirt. He suffered a broken right elbow and was hospitalized.,1
"An employee came into contact with live electrical cable, suffering burns to both hands.",1
"On January 9, 2020, an employee was putting a product in a bandsaw when the bandsaw's clamp pinched the employee's left middle finger against the product. The fingertip was amputated.",0
"On January 9, 2020, an industrial mechanic was replacing suction cups on an end-of-arm tool for a robotic depalletizing machine in a distribution plant. The employee was on an elevated depalletizing table between the depalletizing machine and a conveyor. A mechanical bar (used to push palletized merchandise from the depalletizing table onto the adjacent conveyor) struck the employee's left foot. The employee was hospitalized, requiring stitches and then surgery. The area was guarded with light curtains at the time of the incident.",1
An employee was disposing of psyllium dietary fiber by mixing it with cat litter. The employee began to have difficulty breathing after inhaling the psyllium dust.,1
An employee stepped into an aisleway and was struck by the tine of a forklift. The employee suffered a laceration and fracture to the left foot.,1
"An employee was caught between a truck and a trailer, suffering a pelvis injury. The employee was hospitalized.",1
"A pipe lining crew was using a hot water system to inflate a liner inside a pipe. Hot water and 6.5 pounds of pressure were added to invert the tubes inside the pipes. An employee was standing next to the tube when it burst at the seam, spraying hot water on the employee and causing second- and third-degree burns to the right side of his body. The employee was hospitalized.",1
"An employee was operating a tire changing machine. The employee aired up the tire and the bead did not seat properly. The pressurized tire and rim then flew from the machine and struck his face, causing facial trauma.",1
An employee was holding a blast hose in his left hand and reaching to turn off the compressor with his right when he became tangled in the hose and blasted his right arm.,1
"An employee was conducting a security check, slipped on ice, and fell to the ground injuring the right ankle.",1
"A temporary employee lifted a load of totes with a forklift. As the forklift was turning, the load became unstable, fell, and knocked them employee down onto the concrete floor. The employee suffered a broken pelvis.",1
An employee reached into the running engine of a bus and severed the tip of his finger.,0
An employee fell while walking and struck her head on the wall.,1
An employee delivered a package and was returning to the delivery vehicle when the employee slipped on ice in the customer's driveway and fell breaking a knee.,1
"An employee fell while skiing, suffering a broken left leg. The employee was hospitalized.",1
"As an employee shut the tool cabinet door, his left ring finger was caught between the door and the frame resulting in a fingertip amputation.",0
The injured employee was working in a warehouse and was using a motorized double jack. A nearby powered industrial truck (PIT) was lifting a pallet of boxes that contained frozen meat and weighed 60 pounds each. The PIT struck a cross-member of a storage rack. The load then shifted and the PIT overturned. The boxes fell off the pallet and struck the injured employee breaking his right tibia.,1
"An employee was laying steel columns out for future placement with another employee and a crane. When the crane lifted the column, the material started rotating. The injured employee placed his hand on the column to stabilize it and his right ring finger was pinched between the shackle and the column, amputating the fingertip.",0
An employee was exiting a room and caught their left pinky finger between the door and the door jamb resulting in amputation of the fingertip.,1
"An employee was unloading a semi-trailer, slipped from the edge and fell to the ground breaking their humerus.",1
"An employee was operating forklift. It hit a ramp, causing his left leg to fall out and hit a trailer. He suffered a laceration and a broken bone in his left foot.",1
"An employee was working at the laydown yard moving windmill components. As the employee was stepping from atop one windmill machine head to another adjacent windmill machine head, she slipped and fell 15 feet to the ground below. The employee suffered a compression fracture of the L1 vertebra, a broken pelvis and a broken right ankle.",1
"An employee was stacking cut pieces of wood coming off a conveyor. As the employee was aligning a piece, another one became airborne and struck the employee on the right side of the head.",1
An employee was replacing a fan while on a 4-foot step ladder that was placed on an elevated platform. The employee fell approximately 8 feet and landed on a slanted plastic surface. The employee sustained two broken ribs in the upper back.,1
An employee was guiding a hoisted bundle of decking. The decking swung and pinned the employee's left hand against a structural steel frame. His index finger was amputated.,0
"A driver was making a delivery. While walking to the customer's door, he tripped and fell hitting his head on a parked van. The employee sustained fractured vertebrae in his neck.",1
"An employee slipped in an icy, snow-covered parking lot. The employee fell to the ground and suffered a broken left femur.",1
An employee was cutting tortillas using a kitchen knife and amputated a fingertip and nail.,0
"The injured employee parked the vacuum truck on the SW end of the pulling unit. Another employee used the winch line on the pulling unit to grab a pipe. He wrapped the winch line around the vacuum truck's bumper tow pin and back up around the pipe to just below half-way up the pipe. The pipe began to bow in the middle. The pipe gave way and hit the injured employee on the left side, stomach, and back knocking the employee to the ground.",1
"An employee opened the grinder for inspection and cleaning. He stepped up on some angles on the front of the grinder, held onto the machinery with one hand, and rotated the grinder blade with the other hand. As he was manually rotating the blades in reverse, his left middle fingertip was amputated.",0
An employee was cutting sweet potatoes with a knife. The knife partially amputated the tip of his thumb.,0
An employee was straightening up after reaching under his desk to get something out of his backpack. When the employee came back up he hit the top of his head on a security control panel. He suffered a cut on the head and was hospitalized.,1
An employee was trimming the flash off a part when another part touched his shirt and set it on fire. The employee suffered second- and third-degree burns on the back and was hospitalized.,1
"An employee was operating a router when his left hand was caught in the machine, amputating his two middle fingers.",0
An employee fell and struck a boiler.,1
"A refuse driver was returning a garbage tote, slipped on a curb and fell fracturing the left hip.",1
"An employee was applying plastic stretch film to a roll of carpet using a trolley-mounted stretch film head. The film tore and retracted back into the head of the film machine, wrapping around some small middle tension rollers. The employee was removing the film from the rollers with scissors when the machine activated and fed more film. His gloved left hand was caught between the small rollers and the lid of the stretch wrap machine, causing friction burns to the back of the hand, the little finger, and the middle finger.",1
"An employee fell while moving from a roof to a ladder, landing on the ground about 20 feet below. The employee suffered a broken right leg and foot and a separation of the right shoulder.",1
"An employee was attempting to break loose rail wheels from icy conditions so they could be unloaded. When the rail wheel broke free, it rolled forward and crushed the employee's right leg against a piece of machinery, causing bruising.",1
"An employee was picking up a piece of scrap iron to place it in the recycle hopper when he lost his balance and fell onto the hopper. When he landed, his finger was caught between the hopper and the scrap iron resulting in a partial amputation.",0
An employee was watching foam blocks travel down a conveyor. A piece of plastic that was on one of the blocks got wrapped around one of the conveyer's rollers. The conveyor stopped and the employee tried to remove the piece of plastic; the conveyor started again and the employee's hand was entangled in the plastic and pulled into the roller. The employee suffered a dislocated left shoulder and elbow.,1
"An employee was stung by an insect while working aboard a ship in the shipyard constructing platforms, requiring hospitalization.",1
"An employee was trying to extract a pipe liner out of a pipe, holding and positioning a bar inside the pipe (through an opening on the pipe) while another employee used a press to press the liner out. The first employee's wrist was crushed between the liner and the pipe.",1
"An employee was cutting meat with a band saw when his right middle finger contacted the saw blade, resulting in a soft tissue amputation to the finger.",0
An employee was clearing sugar buildup within the sugar hopper when his left hand contacted the rotary valve resulting in amputation of the middle fingertip.,0
An employee was preparing the dock plate for a forklift to unload a shipment of rolls inside a shipping container. The rolls of fabric inside the container shifted and rolled onto the employee breaking a leg(s).,1
"An employee tripped on a 2-by-4 on a lowboy trailer and fell about 2 feet to the ground, suffering a broken femur.",1
An employee was lowering a pickup truck's tail gate when his right ring finger was caught between a cable and the tailgate's upper rail. The fingertip was amputated at the first knuckle.,0
An employee was cleaning out the powder feed area of a starve feeder. He was clearing some clogged powder near an auger when the auger caught and severely lacerated his right index and middle fingers.,1
An employee had just climbed off a transfer truck (yard mule) and was walking towards the facility when a forklift struck the employee from behind. The employee suffered a fractured left ankle and lacerations to both knees.,1
"An employee fell through an attic ceiling, suffering broken ribs.",1
"An employee was standing on the ground, operating the control panel to a grain bin's slide gate. The gate came out of the slide and fell 60 feet, striking the employee in the head. He was hospitalized.",1
"At about 10:20 a.m. on January 10, 2020, an employee was using a traveling crane to lift concrete product. The crane's lifting bar cable broke and struck the employee, breaking his collarbone. He was hospitalized.",1
"On January 10, 2020, an employee was struck by a falling skid of stringers after a forklift had struck the skid and caused it to fall. The employee was hospitalized with a fractured lower left leg.",1
"An employee was helping the operator remove an auger bit from a drilling rig. During the removal, his left hand was crushed between the head of the auger bit and outer kelly resulting in amputation of the pinky finger.",0
"An employee was pulling blank sheets of metal off a burn table using a crane. The employee was shaking the metal to loosen the blanks from it when a sheet fell onto the employee's left little finger, pinching it against a slat. The fingertip was amputated.",0
"An employee was standing next to a dump truck, dumping a load. A bale of trash from a previous load rolled off a pile and pinned him against the truck. He suffered a punctured lung, two broken ribs on the left side, and a broken collarbone.",1
"A roofer fell off a roof to the ground, suffering fractures to both arms and the right femur.",1
"On January 20, 2020, an employee was working with a 3-4-foot pipe wrench when the employee slipped and fell to the floor striking his head on the pipe wrench. The employee was hospitalized for a skull fracture and a laceration.",1
An employee was working on equipment when it fell and struck his foot causing a fracture. The employee was hospitalized.,1
"An employee was working on 480 volt equipment when an arc flash occurred, burning the employee.",1
"An employee was picking up a steel beam with two gantry cranes. As the employee was moving the beam towards himself, he tripped over the wheel of the crane and fractured his foot, requiring hospitalization.",1
An employee was accidentally shot by a customer's concealed hand gun. The employee was hospitalized.,1
"An employee was transferring a safe with a hand truck. While tilting the hand truck backwards, the safe door opened and fell backwards causing her left middle finger to be caught between the door and side of the safe. The employee suffered a fingertip amputation without bone loss.",1
An employee was removing dough from the extruder cutter head section of a dough-cutting machine. The cutter amputated the tip of his right ring finger.,0
"An employee felt ill after a fatality occurred in the workplace, requiring hospitalization for a possible heart problem.",1
An employee was walking from an excavator to a pickup truck when he slipped on ice and suffered broken leg.,1
"At about 5:50 a.m. on January 12, 2020, an employee was loading a delivery van when he fell off the loading dock to the ground 3 feet below. He suffered head injuries and was hospitalized.",1
An employee was using a battery charging machine. His arm was pinched by a lever and suffered muscle and tendon damage. He was hospitalized.,1
"An employee was driving a bag cart down a ramp. Her left leg was caught between the bag cart and a wall. The leg was broken and she was hospitalized, undergoing surgery.",1
"An employee was attempting to reposition a ride-along pallet jack between steel racking units in a freezer when the pallet jack hit an upright. The employee's hand was outside the steering guard at the time and was caught between the steel upright and the frame of the pallet jack. As a result, the employee's left pinky finger was amputated.",0
"An employee was exiting the cab of a tractor to hook up airlines from the trailer. As he put his right foot on the bottom step, his foot slipped and he fell backwards to the ground onto his left hip.  The fall resulted in a fracture to his left hip that required hospitalization.",1
"An employee was erecting a hanging scaffold onboard a ship. While traversing across a lattice girder, the employee fell 25 feet to the concrete surface below, suffering a broken wrist, shattered left ankle, and fractured right ankle.",1
"An employee was doing preventive maintenance on a gallon caser, cycling the cylinders to identify leaking cylinders or sticking solenoids. He noticed some buildup on the fingers of the machine and was trying to determine how much buildup was present when the fingers crushed his right index finger, removing about half his fingernail and some tissue above the bone.",0
An employee fell and broke his hip while helping a customer push his vehicle in a gas station area.,1
"An employee was attempting to exit a tractor trailer by climbing over a pallet when he fell approximately 4 to 5 feet out of the trailer and onto the ground, breaking his left hip.",1
"An employee was in the back of a flatbed truck moving portable signs when the wind caught one of the signs and caused it to strike the employee, knocking him off the truck. He then struck his head on the roadway.",1
An automated saw's drive shaft caught an employee's glove and pulled him into the machine. His left arm was broken.,1
"An employee fell while turning, striking the back of his head (behind the right ear) on the stone wall as he fell to the floor. He suffered fractures to the right ankle and was hospitalized, requiring surgery.",1
"A maintenance employee climbed a ladder to access an intake on top of a grinder machine and install new equipment. He was attempting to remove a bolt with a wrench when the wrench slipped off the bolt. The momentum of his body caused him to lose his balance and fall 6 feet to the concrete surface below, fracturing his left wrist and left leg.",1
"An employee was attempting to unclog a drain. He added a household drain cleaner to water and a chemical reaction occurred. The chemical mixture splashed onto him, causing second degree burns to his right arm and minor burns to his left arm, neck, and lip.",1
"An employee was sweeping the floor in a smoking area when a customer ripped a door off a cabinet and threw it at her. It struck her head. While she was on the floor, the customer punched her three times in the face. She suffered a 3-inch facial cut.",1
"An employee was operating a gantry crane. The crane raised two steel plates instead of one, and the lower plate slipped from a clamp and landed on the employee's left index finger. The finger was partially amputated at the first joint.",0
"An employee was operating an electric forklift when the forklift slid off of the dock while making a left turn and hit the ground. The employee fractured his right arm, right-side ribs, and collarbone; suffered a bruised liver; and required staples on the right side of his head.",1
"An employee was up on a work platform removing the cover from an oil filter housing to change out the filters on a furnace when the oil pump continued to push out the oil, which contacted the employee and landed on the hot furnace. The oil then flashed and the employee received second and third degree burns on the left arm, left side of the back, buttocks, and flank area.",1
An employee fell while picking up a passenger at their home.,1
"An employee was inspecting the inside of a new tank car. He attempted to maneuver around another employee inside the tank car when he slipped and fell, suffering a femoral neck fracture.",1
"An employee was operating an auger when the employee was pulled into the auger, suffering broken ribs and a broken right arm and wrist.",1
"An employee lost balance while loading dishes into a dishwasher and fell to the floor, breaking a femur.",1
"An employee slipped on snow or ice on the sidewalk, impacting the concrete and suffering five fractured ribs, three fractured vertebrae, and a punctured lung.",1
"A forklift backed into an employee, running over his right foot and leg. The employee suffered a leg fracture.",1
"An employee was climbing out of his truck in the rain when he slipped and fell to the ground, fracturing his right hip and requiring surgery.",1
An employee was driving a forklift into a warehouse when the forklift struck the door frame. The employee's left leg was broken between the door frame and the forklift.,1
"On January 13, 2020, the injured employee made a 3/4 cut into a 7-inch abandoned water pipe. An excavator operator extended the excavator bucket to push down onto the pipe and finish breaking it off. After the pipe broke loose, the excavator operator hooked the cut end of the pipe with one of the bucket's teeth and started to slide the pipe away from underneath the trench box. The pipe popped off the bucket's tooth and struck the injured employee in the leg.",1
"An employee was power-washing engine parts with a high-pressure water hose. The water from the pressure wand cut through the employee's steel-toed right shoe, lacerating the foot.",1
An employee was trying to lift heavy metal stairs when he heard a pop on his back. He was hospitalized with fractured vertebrae.,1
"An employee was working with others on top of a derrick to drill a pipe into the ground. He placed his hands on the pipe to steady it and his fingertips were caught between the collar and elevator, resulting in middle and ring fingertip amputations.",0
"On January 10, 2020, an employee finished drinking a bottle of sports drink and set it down empty in a maintenance shop before leaving for the weekend. The bottle was then used to hold brake cleaner. On January 3, the employee refilled the bottle with water, began drinking, and became nauseated and vomited after the first few gulps. The employee was hospitalized.",1
An employee was receiving a data cable that was being moved through a conduit. He suffered an electrical shock causing a cardiac event and was hospitalized.,1
"On January 13, 2020, an employee was operating a clip jig machine. The employee operated the lever to lower a hold-down fixture, placed clips on the part, and then operated the lever again to lower another fixture that pressed the clips into the part. The employee's right index finger was caught in the point of operation and the tip was amputated.",0
"An employee was exiting a truck when its steering wheels ran over the employee's left foot, causing crushing injuries.",1
An employee was testing a tool by running it down into a pipe with a gun when the employee's right middle finger was caught between the pipe and the testing tool. The employee was hospitalized.,1
"An employee was working from a telescoping ladder in an elevator shaft. The ladder collapsed and the employee fell into the elevator pit, breaking both heels.",1
"An employee was stocking empty watch boxes onto shelves while on a rolling stool when the stool rolled out from underneath the employee. The employee fell to the floor, suffering a fractured hip.",1
An employee fell approximately 10 feet from a wet ladder while climbing down off a roof. He was hospitalized for a possible lower back fracture.,1
"An employee was atop a ladder when it slipped, causing him to fall 14 feet to the ground below. He suffered a left eye socket fracture and a laceration from below the left eye to the mouth area and was hospitalized.",1
"An employee was clearing a clog in a dust collector using a chop saw. The sawblade lacerated the employee's right index and middle fingers. He was hospitalized, undergoing surgery.",1
"An employee fell about 10-14 feet from a trailer and suffered a dislocated left wrist, a fractured right wrist, a hairline fracture to vertebrae and the neck, and a 1-1.5 inch laceration to the head. The employee was hospitalized.",1
"An employee was operating a roller machine that stamps out Kaiser rolls when his hand entered the machine's roller. His finger was caught by the chain that places the indentation in the roll, resulting in a left ring fingertip amputation.",0
"An employee was changing a belt on an air handling unit. Their right pinky finger was caught between the belt and a sheave, resulting in amputation below the first knuckle.",0
"On January 14, 2020, at approximately 2:35 p.m., an employee was reversing a stand-up lift truck while moving pallets from the rail dock to racks. A clamp truck operator at the rail dock stopped to yield the right-of-way to the employee, who attempted to stop and change directions. The lift truck then slid on condensation on the dock floor and impacted the clamp truck, resulting in the clamp striking the employee's left foot. He was hospitalized with a punctured left foot.",1
An employee was operating a wood chipper machine when it became jammed with material. The employee's fingertip was amputated while trying to unjam it and the employee was hospitalized. The machine was not running at the time of the incident.,1
"An employee was driving a tractor on an earthen ramp when the ramp's surface area broke away, causing the tractor to flip over. The employee suffered a back injury.",1
An employee was sorting boxes on the pre-sort line and attempted to make an adjustment to a box on the box line. The line was in motion and caught the employee's thumb between the box and a guardrail upright at the end of the platform. The employee sustained an amputation of the distal phalanx on the left thumb.,0
"An employee was attempting to repair a conveyor belt when his right pinky finger was caught between the belt and the drive pulley, resulting in a finger amputation.",0
"An employee was throwing garbage when he slipped or stepped on a loose brick and fell to the floor. He suffered head, shoulder, and right ankle injuries.",1
"An employee drank liquid from a water bottle. The employee sustained chemical burns to the lips, mouth, throat, and legs and was hospitalized. A coworker had intentionally substituted the injured employee's water bottle with a water bottle containing sulfuric acid.",1
An employee was using a snowmobile to access a remote site when a change in the terrain caused the snowmobile to roll over onto the employee. The employee was hospitalized with a compound leg fracture.,1
"An employee was walking and hit his head on a fire extinguisher wheel. He fell to the ground, struck his head on the floor, and was knocked unconscious. He was hospitalized with a head injury.",1
An employee slipped and fell while walking down a stairway and sustained a fractured left tibia and fibula.,1
An employee got off a forklift to adjust the forks. An electric tugger with four dollies attached turned the corner and one of the dollies pinned the employee against the forklift. The employee was hospitalized with bruising to the buttocks.,1
An employee was working on the construction of a wall when the employee tripped on a clamp and fell. The impact of the fall resulted in a broken leg that required surgery.,1
"While working from a scissor lift, and employee contacted live electrical components and was shocked, receiving electrical burns.",1
"An employee was riding a lift gate when his right foot was caught between the lift gate and trailer, resulting in the amputation of his middle and fourth right toes.",0
"An employee was using a jack to lift a vehicle fuel tank. The air-powered jack pinched the employee's fingers when activated, fracturing the left index and middle fingers and injuring the left index extensor tendon.",1
An employee was struck by a falling pallet of cat food that a forklift operator pushed off an overhead rack. The employee suffered a fractured C7 vertebra in the spine.,1
"An employee was trying to gain access to the attic from the second floor when the employee fell approximately 10 to 12 feet to the concrete below. The employee suffered forehead trauma (bleeding on frontal lobe), facial lacerations and fractures, and a collapsed lung.",1
An employee was loading a 5-foot auger drill bit onto a flatbed truck. His right pinky finger was caught between the auger he was rolling and another that was already on the truck. He sustained amputation of the pinky finger below the lower knuckle.,0
"A roof truss had stopped moving at the location where the finished trusses come out of the building and go into the finish press. An employee went into the approximately 2-foot wide gap between the wall and the finish press to push the truss into the press. The press engaged, and the truss hit the employee. The employee sustained a hair-line fracture of the pelvis, requiring hospitalization.",1
"An employee was helping to clean up an iron spill. A 3-foot skimming rod was laid on top of the machine ladle of a casting machine. The rod had been previously dipped in the blacking liquid. The wet rod fell into the ladle, causing a reaction that ejected molten iron from the ladle. The molten iron contacted and burned the employee's left foot.",1
An employee was inspecting the MDO rolls for wrapper film when his hand was caught between the rotating MDO rolls.,1
"An employee was filling a mop bucket with hot water for cleaning. 200-degree water spilled out of the bucket onto the employee, causing first- and second-degree burns to the front of the employee's body and the employee's left leg.",1
"On January 14, 2020, an employee was clearing a blockage in the gate valve of the deaerator tank located in the boiler room. As the employee was getting the gate valve fully nested, the blockage cleared and the employee was sprayed with hot water (225°F). The employee was hospitalized with burns to the face, neck and shoulders.",1
An employee was vacuuming the framework around a belt conveyor when the vacuum attachment and employee's arm were pulled into the conveyor. The employee suffered fractures to the right radius and ulna.,1
"An employee's hand entered a CCS machine, resulting in a left hand amputation.",1
Two employees were working to unchoke a dust collector. The injured employee suffered amputation of two fingertips when he contacted the rotating rotary valve. The valve was unguarded at the time of the incident.,0
"An employee was lifting a mold using an overhead wire sling when the employee's left ring finger was caught and crushed between the mold and the wire sling, resulting in a partial amputation of the finger.",1
"An employee was moving a pumping unit into the top-dead-bottom position. He stood behind the pump jack motor and began pushing on the belt to help roll the pump unit. The unit moved and suddenly shifted. The employee then slipped and lost his balance. His left hand contacted the bottom belt and was pulled into and around the motor sheave, amputating his left pinky fingertip and lacerating and fracturing his left ring and middle fingers.",0
"An employee was inside a mid-level ballast tank onboard an amphibious transport dock (naval vessel). He was walking across the deck and stepped onto a board that was covering an open hole. The board split and the employee fell about 15 feet to the bottom of the tank. He sustained internal bleeding, a brain hematoma, and fractured the C6 and L1 vertebrae.",1
"An employee was on a scaffold tearing down a pool cage and knocking down a beam with a hammer when the entire sidewall gave way and knocked the employee from the scaffold onto the paved deck below. The employee subsequently fell into an empty pool, suffering a broken rib and broken jaw.",1
An employee was cleaning parts in a solvent tank when solvent spilled on the employee's clothing. The employee walked by a furnace and the solvent on their clothing caught on fire resulting in burns to the entire lower half of his body.,1
An employee was sanding a piece of metal with a disk sander when the clamps holding the piece of metal did not fully engage due to a build-up of debris. The disk sander then amputated the employee's right thumb tip with bone loss.,0
An employee was prepping an 8-inch by 20-foot long piece of steel to cut. The steel was being moved by a crane with a webbed piece of strap when the steel fell over and crushed the employee's finger against a table. The employee sustained a partial amputation of the left index fingertip.,0
"A truck driver was performing a delivery. While walking towards the customer's lift gate, the driver slipped and fell sustaining a fractured shoulder.",1
An employee was pressure washing a vent hood on the roof of a building. He was standing on the parapet wall when he fell off the roof to the ground. He was hospitalized.,1
"An employee was changing out of his smock and tripped, falling to the floor and fracturing a hip.",1
"While participating in a unit-level training exercise, an employee was acting as a gate guard. During the exercise, a role player approached the entry control point driving a black vehicle. The employee was attempting to take the role player into custody when a small struggle occurred and the employee fell to the ground. The employee's lower body contacted the role player's knee, causing blunt force trauma and a blood clot to the lower body that required hospitalization.",1
"While standing on a step ladder an employee was washing out a cattle trailer using a water hose. The employee slipped and fell off the ladder, landing on concrete. The employee was hospitalized with fractured ribs and a fractured right shoulder.",1
"An employee was run over by a machine while cutting a lawn, suffering a broken clavicle and tibia.",1
The injured employee was cutting down a tree while another employee was operating heavy machinery to help pull the tree down. The tree fell and struck the injured employee in the head causing a laceration to the head and injury to the neck and chest.,1
"An employee had been using a pry bar to remove a sign (weighing 150 lbs.) from an endcap. The employee was holding the structure when the sign came loose and fell, striking and amputating their right thumb.",1
"An employee was getting laundry out of a dryer at a client's home. The employee fell to the floor, suffering a broken hip ball socket.",1
"An employee was operating an overhead crane to lift a forklift battery for cleaning when his left middle finger was caught in the crane clamp, resulting in a left middle fingertip amputation.",0
"An employee climbed up a ladder to pull product from a back room when she lost her balance and fell from the ladder to the floor, suffering a compound fracture to her left lower leg.",1
"An employee was working at a machine when hydraulic oil started spraying out from a cracked fitting. The spray contacted the hot end of a part, which ignited the oil. The employee suffered a second-degree burn on his forearm and was hospitalized.",1
"An employee was in the back of a truck taking load bars down when he slipped and fell onto the truck trailer floor, fracturing his left hip.",1
"At about 3:30 a.m. on January 15, 2020, an employee was scanning a barcode on a truck. When the scissor lift was lowered, the employee's left foot was caught under it. The big toe was amputated.",0
"An employee was operating a hydraulic press when their finger went between the dies, resulting in an amputation to the left index fingertip.",0
"An employee was lifting a die plate with a hoist. The employee's finger was caught between the hoist hook and the die plate eyebolt, and the fingertip was amputated.",0
"On January 15, 2020, an employee was working at a welding machine and holding the tarp as it came out of the machine. As the machine began to cut the tarp, the employee attempted to cut the corner of the tarp with scissors. The machine's blade then contacted his finger, resulting in a partial amputation of the left fifth digit.",0
"An employee was clearing a jam on a vacuum packaging line. While threading film through the machine, her left hand was pulled into the machine. The employee's index, middle, and ring fingertips were amputated.",0
"On January 15, 2020, an employee was using a pendent-controlled crane to lower a part onto a prep table when the employee's left ring finger was pinched between the part and the prep table, resulting in a fingertip amputation.",0
An employee was entering a locker room when she was hit by the door as another employee was exiting the locker room. She suffered a contusion to her face near the right eye.,1
"An employee was checking the tension on a canter trash chain when the employee came into contact with the moving chain, resulting in a right index fingertip amputation.",0
"An employee was repairing a sensor on a conveyor line when the employee's finger was caught between a moving chain and sprocket drive, resulting in a middle fingertip amputation.",0
"An employee was using a hammer and chisel to remove some floor tiling when a piece of tile went under the employee's safety glasses and into the eye, lacerating it and requiring surgery.",1
"An employee was pulling a parts basket that weighed between 500 and 3,000 pounds when the employee's left pinky finger was caught between the basket and a rack, resulting in a pinky fingertip amputation.",0
An employee slipped on ice while walking outside and suffered a broken tibia and fibula.,1
"An employee was cleaning lights while standing on a stainless steel surgery table/bed. The wheels on the bed moved, and the employee fell to the floor sustaining a broken left leg.",1
"An employee was helping to fold up a long table attached to a wall when the table fell onto her pelvis, fracturing it.",1
"An employee was making a wooden crate with a pneumatic nail gun when the employee slipped with the nail gun in hand. The trigger release was hit and the nail gun went off, shooting a nail into the employee's left foot.",1
"While an employee was repairing a water condensate motor and pump, the grating covering an adjacent u-drain dislodged. This caused the employee's right leg to drop into hot water condensate resulting in a thermal burn to the lower right leg.",1
"An employee was installing a skillet blind when the employee's left index finger was caught between a wrench and a bolt, resulting in a fingertip amputation.",0
"On January 15, 2020, an employee was walking toward a wire carrier that was about to finish uncoiling when the wire carrier became jammed and fell onto the employee's ankle, breaking it.",1
An employee was working in the chipper location when their leg was caught in part of the chipper. The employee sustained a leg amputation.,0
"An employee was on a roof setting up a personal fall arrest system when the roof gave way and the employee fell 25 feet to a platform below, suffering a broken wrist.",1
"On January 15, 2020, an employee was sitting on a rub rail at a dock. At the same time, a truck driver was backing a truck trailer into the dock. The employee was struck and caught between the truck and trailer, requiring hospitalization for fractured ribs and a lacerated kidney.",1
"While working on a small scaffold, an employee fell between the scaffold planks. The employee was hospitalized with multiple fractured ribs.",1
"An employee hit a concrete wall while operating a standup forklift. The employee's left foot was crushed, resulting in a foot amputation.",1
An employee suffered a ruptured gluteal artery while providing physical therapy at a patient's home.,1
"An employee slipped and fell on wet concrete paving, suffering a broken hip.",1
An employee was opening the top steam vent on the main fractionator. The trapped hot condensate from the vent leaked out and landed on the employee's back and shoulders. The employee was hospitalized with second degree burns.,1
"An employee was hooking up a dolly as a coupling between two trailers. The dolly went over a lip in the asphalt, and the employee's left hand was pinched between its frame and the lead trailer. The ring finger was lacerated and broken.",1
"An employee was setting up a lane closure. A Truck Mounted Attenuator (TMA) was stationed in the roadway with the crash cushion in the downward position. The arrow board was mounted on the TMA in the upward position with the arrow activated instructing the traffic to move over. The pilot vehicle with a trailer attached was approximately 102 feet in front of the TMA. The employee was between the pilot vehicle and the TMA, standing on the berm of the road with one foot on the berm and one foot on the fog line. A motorist went around the TMA and then took evasive action, came back across the lane, and struck the employee. The employee was hospitalized with broken ribs, a broken leg, and a head injury.",1
"While an employee was weighing product, her hand was caught on the shaft of a moving transfer conveyor. The employee's hand was injured.",1
"An employee was operating a lathe in a tool and die shop when a lanyard around his neck was caught by the lathe. He was pulled in and was struck by the handle. The employee sustained torso, lower back, and posterior head trauma resulting in hospitalization.",1
"An employee was mixing a batch of starch. As the employee added steam to the mixer, the starch overflowed. The employee slipped on the hot starch, which burned the employee's left hand and lower left leg. The employee was hospitalized.",1
"An employee became pinned by two I-beams while performing rigging operations, injuring the left leg above the left ankle.",1
An employee was performing preservation work on a new construction hatch door when the 400-pound hatch door closed on the employee's left hand. The impact crushed the employee's left ring and middle fingertips and resulted in an amputation of the employee's left middle fingertip.,1
"An employee's left middle fingertip was crushed by an excavator bucket, resulting in a fingertip amputation.",0
A rural mail carrier was shot by an assailant while delivering mail and sustained head trauma.,1
"An employee was installing water-proofing on a balcony with a 2x4 wooden railing when the railing cracked and became off place. The employee fell three stories to the ground, breaking his hands and suffering head trauma.",1
An employee delivering packages experienced a cardiac event.,1
"An employee was walking when an I-beam fell on his right foot, causing lacerations that required hospitalization.",1
"An employee was stacking and organizing materials at a tower construction site when he fell through a 3-foot-by-6-foot hole that had been covered by plywood. He landed on a lower-level floor and suffered fractures to the left femur, left foot, left arm, and pelvis.",1
"An employee was working on a running lathe. He was attempting to advance the ring on the well to make it flush with another component. When he attempted to mark the steel with a marker, the long finger of his left hand was caught between the gap in the ring, resulting in a fingertip amputation.",0
"While attempting to realign a crate, an employee slipped and fell to the same level. The employee was hospitalized with a fractured leg.",1
"An employee entered the conveyor area to insert multiple extensions into profiles. The employee stepped on the framework while exiting the conveyor area and fell forward, resulting in the employee being pinned between the framework.  The employee suffered a broken ankle, a broken fibula, and a dislocated knee, requiring hospitalization.",1
An employee was guiding a top mold plate down to connect to a bottom mold plate when the employee's fingertip was caught and amputated between the two plates.,1
"On January 16, 2020, at 6:20 p.m., an employee stepped out of the cab of a trailer truck and onto an asphalt road when he slipped on black ice, fell on the road. He suffered a head injury and laceration, requiring hospitalization.",1
An employee stepped off an electric pallet jack and it cut her foot.,1
"On January 16, 2020, at approximately 7:15 a.m., an employee was loading surfaced hardwood onto a cart when a wood splinter punctured the glove on the employee's left hand and pierced the skin between the index and middle finger. The employee was hospitalized the next day.",1
"A driver was delivering a garbage container to a customer residence. An SUV struck the driver from behind, causing injuries that necessitated the amputation of the employee's leg.",1
"While moving merchandise, an employee slipped on spilled liquid on a sales floor, fell, and suffered a broken kneecap.",1
"An employee was operating an electrical pallet jack with extended forks and was making a turn at the end of the aisle when his foot was caught between the pallet jack and a bollard, smashing four of his toes.",1
"An employee was operating a screw conveyor when his left hand entered the conveyor's auger, resulting in an amputation of approximately 3/4 of the middle finger.",0
"An employee was operating an electric pallet jack when he lost control of the jack and it ran over his right foot, injuring it.",1
"An employee was measuring a steel coil as it traveled down a roller conveyor when the employee's left index finger was pinched between the steel coil and the roller on the conveyor, resulting in a fingertip amputation.",0
"An employee was retrieving a 17-pound stator from an overhead bin when the stator fell on his head, striking and lacerating his face.",1
An employee was helping to offload a container when the container contents leaked and he was sprayed with caprolactam. He was hospitalized with thermal burns from the hot chemical (over 100 degrees).,1
"An employee tripped and fell into a conveyor, which caught and broke his right forearm.",1
A branch fell from a tree that was being trimmed. It struck an employee on the head; the employee suffered a skull fracture and was hospitalized.,1
"At about 10:40 a.m. on January 16, 2020, an employee was with a crew removing boiler panels after a demolition. He was at ground level receiving the metal panels. He was holding on to a panel, trying to position it as it was being lowered. It stopped, then came down suddenly, striking and pinning down his left foot. He suffered a deep laceration on the side of the foot, as well as broken toes. He was hospitalized.",1
"An employee was supervising the movement of two houses by line roll. He was on the ground level when he tripped on a hanging wire and impacted the concrete floor, fracturing his right femur.",1
"An employee was trying to clear debris from a grinder machine. His left hand was holding the vacuum hose as the plastic bag was about to be sucked into the machine. As he was trying to move it, his fingers slipped through the bars and the grinder paddles amputated three fingertips.",0
"An employee was climbing a scaffold near the captain's deck of a ship to paint the hull when the scaffold began to fall. The employee jumped 7 to 8 feet as the scaffold was falling, landing on his feet. He broke his left ankle, suffered a compound fracture to his right foot, and ruptured a lower disk.",1
"An employee was lowering a stop sign when the employee's finger was caught in between the stop sign and the brace, resulting in an avulsion to the right pinky fingertip.",1
An employee was cutting a piece of wood with a saw when the blade amputated his left index and middle fingers.,1
"An employee was conducting a roof inspection when he tripped on an air hose and injured his right knee extensor, requiring hospitalization and surgery.",1
"An employee climbed an extension ladder with a 5-gallon bucket and was traversing from the ladder onto the roof when the employee's hand slipped while reaching for an upper rung. The employee lost hold and fell 18 feet to a lower roof, suffering fractures and a punctured lung.",1
"Two employees were delivering refrigerator up a ramp using a furniture dolly when the dolly and refrigerator tipped over, striking one employee. The employee suffered three broken vertebrae in the neck area and was hospitalized.",1
"An employee was installing an grab bar at the home of a customer. He drilled in the wall and made contact with an electrical wire, receiving an electrical shock that required hospitalization.",1
"An employee was on a 6-foot ladder, drilling into a metal stud to install conduit. The employee fell from the ladder to the ground about 4 feet below, suffering a broken left wrist.",1
An employee was cutting a pallet with a power saw. The sawblade cut the employee's leg.,1
An employee was installing a bait station in the attic of a residential home when the employee fell approximately 8 feet through the sheetrock to the floor below. The employee suffered a broken left ankle and required surgery.,1
"At 2:15 p.m. on January 17, 2020, an employee was climbing down a scaffold ladder. As he moved from the ladder to the work platform, he slipped and fell about 5 feet to the lower level. He suffered a broken bone in the left leg.",1
"An employee tripped on a pallet jack and fell to the floor, breaking an arm.",1
"An employee was driving new vehicles from the plant to the rail station. While getting out of a van, she lost her footing and stumbled to the ground, breaking her right wrist. She was hospitalized and later had surgery on her wrist.",1
"An employee was placing a chuck and strand into a stressing jack arm. The chuck and strand fell into the ram. The employee grabbed the chuck and tried to reposition it.  At the same time, another employee was moving the ram down and the injured employee's right little pinky and ring fingers were pinched between the chuck and stressing ram. As a result, the employee's right pinky fingertip was amputated and right ring finger was cut.",1
"The employee was trying to repair a snow blower in an enclosed garage. He was overcome by carbon monoxide fumes from the blower, collapsed, and was hospitalized.",1
"An employee was aligning metal beams on a table by hand before pushing them into a cutting machine when his hand was wedged between two beams, resulting in a left ring finger amputation.",1
An employee approached a customer about a product he was leaving the store with and the customer shot the employee in the left leg. The employee experienced bleeding and a broken femur.,1
"An employee was exiting a truck when the employee's foot slipped off the truck step. The employee fell and struck the ground, suffering fractured ribs. The employee was hospitalized.",1
"On January 17, 2020, at approximately 6:10 p.m., an employee who was operating a forklift came to a stop and exited his vehicle. An RF scanner on the vehicle fell onto the throttle, causing the forklift to accelerate in the employee's direction. He fell to the floor and his left leg was pinned underneath the forklift, resulting in a compound fracture to the left leg.",1
An employee was servicing a first stage rescuer when his hand was caught and lacerated in the channel faws.,1
An employee was setting up parts on a 2-ton press. The press came down and amputated the employee's left pinky and left ring finger.,0
"An employee was walking past a lint cleaner when he slipped. His hand was caught in the lint cleaner, and four of his fingers were amputated.",0
"An employee slipped on an icy sidewalk while walking into a building. The employee fell to the concrete, suffered a broken left ankle, and was hospitalized.",1
"The injured employee was holding a stack of doors while another employee pulled a door out from the stack. The injured employee fell to the ground, striking his head (which sustained a 1-inch cut) and back and suffering a broken hip.",1
"An employee was in a pipe rack area. A pipe rolled and struck him in the back of the head. It pushed his head into another pipe, which crushed his face. He suffered fractures to the jaw bone, left eye socket, and facial bones, as well as a slight skull injury.",1
"An employee fell through the door of a gas station kiosk, landing on the concrete ground and suffering fractures to the right rib and shoulder. He was hospitalized.",1
"On 1/17/2020, an employee was re-roofing a second-story tile roof when he fell onto the first-story roof and then rolled off onto the ground. He was hospitalized with crushed vertebrae in the lower back, requiring surgery.",1
"A truck driver was in the back of a trailer, clearing it out after a delivery. The driver began to climb out of the trailer using a ladder leaning against it; the ladder kicked out and the employee fell to the pavement, suffering a broken hip and bruised ribs.",1
"An employee was walking toward a stack of wood to remove a tag for material tracking. He slipped on ice and fell, suffering broken ribs.",1
An employee was connecting a dolly to a yard hostler truck and severed the tip of his left thumb.,1
"An employee was standing on a step stool in the cooler to reach a product when he fell off the step stool and struck his head on a rack in the cooler. He suffered a concussion and strains and sprains to the neck and back, requiring hospitalization.",1
"An employee was replacing chains on a forklift, whose mast was hooked and supported by an overhead 5-ton crane. When the support nuts at the bottom of the fork chains were removed, the forklift forks and backstop fell on the employee, knocking him down and pinning him to the floor. He suffered injuries to the left hand, neck, back, and collarbone and a broken left femur. During surgery, his left ring finger was amputated to the first joint.",1
"An employee was unloading items from a top stock cart on the sales floor when she lost her balance and fell around 4 feet to the ground, fracturing the right tibia plateau.",1
"While working in the feed yard, an employee slipped on ice and fell resulting in back pain.",1
An employee was operating a forklift when the employee's foot was pinned and injured between two forklifts.,1
"An employee was stepping onto an angled piece of metal to reach/wash off the gravity table when he slipped, reached to catch himself, and his left hand contacted the drive head roll belt, resulting in lacerations to the top of his left hand and a boxer's fracture. He required surgery to repair tendon damage.",1
"On January 17, 2020, an employee was working on a double bender. While the first bend was being made on a piece of metal, the bending pin broke and struck the employee on the right side of his face, lacerating it.",1
"An employee was helping to move cargo when his left-hand fingers were caught in a pinch point on the load, resulting in a laceration and dislocation.",1
"An employee was walking a patient in the ICU when the patient fainted and fell on the employee. The employee's leg was twisted, requiring surgery.",1
"On 1/17/2020, an employee was lifting a piece of steel (shaft) with another employee when suddenly the metal fell and crushed the employee's left middle fingertip. The employee was hospitalized and required stitches.",1
An employee experienced a fingertip amputation while attempting too unjam a bag packer auger.,1
"An employee was helping to roll a pipe into position when his finger was caught between pipes, resulting in a right index fingertip amputation.",1
An employee was troubleshooting a varnish pump. He removed and replaced the pump. The pump was turned on and the pump impeller amputated his right middle fingertip.,0
An employee was bending while using a hose to clean underneath a product cooker when the employee sprained/strained the lower back.,1
"An employee was assembling warehouse storage racks/shelving when a PIT struck and knocked over three 4-foot-wide by 30-foot-long upright racks that were laying parallel to the floor in the staging area. The uprights struck the employee, who suffered a fractured hip and three fractures in his back. He was hospitalized.",1
"An employee was struck in the head by a pipe while servicing a compressor, requiring hospitalization for a head injury. A hard hat was not worn at the time of the incident.",1
"An employee was moving a steel bundle with an overhead crane when the wrong button was depressed on the overhead crane controls, causing the steel load to crush him. He suffered a fractured hip or pelvis.",1
"An employee was crossing into the kitchen area when she slipped on the floor, which had recently been mopped. She fell to the floor, hitting the back of her head and spraining her lower back. She was hospitalized.",1
"An employee was placing frozen items into a bin containing hot water to defrost them when the hot water splashed on the employee, causing burns that required hospitalization.",1
"An employee tripped and fell while zoning and cleaning up an area, suffering a hip fracture that required surgery.",1
"An employee was working on the sort line when it became jammed. He had to go onto the line to remove a wire that was twisted in the conveyor. When the wire was removed, he entered an area above the chute. Once the belt was restarted, he missed a step and fell down the chute, landing on the pile of refuse below. He suffered multiple lacerations.",1
"An employee tripped on a curb and fell to the ground while walking into work, breaking the left wrist.",1
"An employee was walking on an icy driveway to make a propane delivery when the employee slipped on ice and fell the ground, breaking an ankle.",1
An employee was operating a forklift when the employee's left foot was crushed and fractured between two forklifts.,1
"An employee was lowering a vehicle on an automotive lift when his finger was caught in the nip point of the lift's moving gear, resulting in a fingertip amputation.",0
An employee was working on a standalone ice making unit in the maintenance area when he bent over the machine to move it into a better access point and heard a pop in his back. He was hospitalized with a compression fracture of the lower vertebrae.,1
"An employee was working with a crew on a roof to remove the existing concrete tile and underlayment. He walked down to the eave of the roof with his rope to install the new underlayment. While installing the underlayment, he slipped off of the roof onto the concrete porch below, fracturing his arm and leg.",1
"An employee was in a basket on a forklift, wrapping a new home. The basket fell off the forklift to the ground, and the employee suffered a broken femur, broken ribs, and a collapsed lung.",1
An employee was attempting to clean metal scrap out of a machine when the ram came down and smashed his right hand.,1
"An employee was putting tools back on a tool rack in the tank farm area when the employee tripped on a drain hose and hit the ground, fracturing the left hip.",1
"An employee was replacing a sawblade. While he was bringing the saw cylinder back to home position, the cylinder framework lacerated his head near the left eye. The machine was guarded at the time.",1
"Employees were moving material with a crane when the plate clamps that were attached to the crane caught the flag of a steel beam. The clamps flipped off the rollers and landed on the employee's foot, causing a laceration.",1
"Employees were working to remove a blow-out preventer (BOP) by dragging it with a tandem bed truck on the BOP skid from between two rig subs during rig-down operations. An employee was spotting the BOP skid as it was being pulled out by a tandem bed truck so it did not contact the rig sub's cylinders. He was standing on each side of the BOP skid directly beside the gas well cellar that the BOP had been removed from in order to watch the skid pass the cylinders and communicate with the bed truck operator as he pulled the skid away from the spotters. At the time, the well cellar guards had been removed from around the BOP, as is required to disconnect the BOP and lay it over on the skid. The employee stepped back into the cellar opening and fell 4 feet down onto a metal work platform and toe board, resulting in a broken collar bone, broken ribs, and a punctured lung.",1
An employee slipped while shoveling snow. The employee's hand broke a window and was lacerated by the glass.,1
"An employee was helping a client unclog a dryer discharge chute when hot process water and salts spilled onto the employee, causing second degree burns to 25 percent of his body.",1
"An employee was operating an excavator to sort scrap metals when a pipe flew off from being sheared by another excavator and pierced through his operator cab's glass. The metal pipe them struck him, causing a head concussion.",1
An employee suffered burns and lacerations to both hands while cutting a ground wire.,1
"An employee was plumbing a wall when he fell from a 6-foot-4-inch scaffold, landing on the ground and suffering broken ribs and cuts on his head.",1
"An employee was pulling a pallet jack backwards in the stock room when the employee tripped on the handle. The employee's head struck the concrete floor, causing severe head trauma that required hospitalization.",1
An employee was cutting meat on a band saw and amputated his right index finger.,0
"An employee developed metal fume fever due to grinding or welding operations on a metal base, requiring hospitalization.",1
"An employee fell down an unmarked, open elevator shaft, hitting the ground and sustaining a back injury that required surgery.",1
"An employee was operating a powered industrial truck (PIT) to unload a trailer when a second PIT turned and the pallet being carried struck the employee, lacerating his side.",1
"An employee was helping a customer near the fitting room. While getting a dress for the customer, the employee slipped and fell to the floor. She sustained neck injuries and was hospitalized for surgery.",1
"An employee was helping an operator set up a rebar-bending machine. The employee's little finger was caught, broken, and lacerated between the rebar and a pin.",1
"An employee slipped and fell on ice while entering a patient's home, breaking the right ankle.",1
"On January 20, 2020, at approximately 3:45 PM, an employee was driving a golf cart around a curve when the cart started to tip. The employee put her leg out to steady the cart when it tipped to the side and her leg was caught between the cart and the ground. She suffered a right ankle fracture.",1
"On January 20, 2020, an employee was working under a semi-truck that was on a jack. The employee was changing tires and doing an oil change when the truck slipped from the jack and crushed the employee's chest.",1
"An employee was using a horizontal bandsaw to cut materials. As the saw was rising to the top position after completing a cut, the employee attempted to remove the drop scrap piece. The blade was still moving at the time and caught the drop scrap, which then struck and amputated the employee's left index and middle fingertips.",1
"An employee slipped on a patch of ice while walking into work, impacting the ground and suffering a compression fracture to the spine.",1
"While going to get salt to treat ice on a city road that runs between the building and the yard, an employee slipped and fell on ice on the street, breaking the left hip and requiring hospitalization for surgery.",1
"On Monday, January 20, 2020, at approximately 6:45AM, an employee was exiting the cab of his truck when he stepped on an ice patch and fell, fracturing his left ankle. He was hospitalized and had surgery.",1
"Three employees were manually flipping a roll of coiled tubing when the tubing struck the injured employee's right thumb, resulting in a fracture and soft tissue amputation of the thumb.",0
"An employee was stocking groceries using a 2-step stool. As she stepped down, she fell to the floor and fractured her hip.",1
"An employee was walking in a designated aisle when the employee turned a corner and tripped on a pallet, fracturing the left patella.",1
"While walking, an employee slipped on icy ground and fell resulting in fractures to the right fibula and tibia.",1
"An employee tried to clean a roller with a metal tong when the employee's right hand was caught between the roller and the tong, causing an amputation to the index finger.",0
"An employee slipped and fell on a patch of ice, resulting in a fracture to his right radius and nerve damage.",1
"An employee was moving metal in a forming machine when an adjacent employee hit a button, causing the machine and metal to cycle in the wrong direction. The metal struck the employee's leg, causing severe leg lacerations that required hospitalization.",1
An employee was operating a hydraulic press brake when his right index finger went between the metal and the bending blade. The hydraulic press brake then cycled and severed his right index finger.,0
"An employee was closing a safe when the safe door closed on the employee's left middle finger, resulting in a partial amputation.",0
"An employee was on the roof of the facility, and was accessing the penthouse roof, when he slipped on ice and fell, fracturing his right leg. He was hospitalized and had surgery.",1
"An employee was cutting shams on a table saw when the employee's left hand made contact with the saw blade, lacerating four fingers.",1
"An employee was working on a wind-out and putting a calendar on the roll. While he was guiding the roll holding the bar, the roll slipped and pinched the tip of his left index finger, resulting in a finger amputation.",0
"A temporary employee slipped and fell after coming inside out of the snow, suffering a broken right ankle. The employee was hospitalized for surgery.",1
An employee was replacing a converter box in a wind tower. He contacted an electrical line and suffered burns to the left hand. He was hospitalized.,1
"An employee stepped down from his truck and slipped on ice, suffering torn ligaments in his left knee.",1
"On January 20, 2020, an employee was at a residence removing a fan unit from the sidewall while on a scissor lift. He lost his balance and fell 8 feet from the lift to the floor, hitting his head. He suffered several facial and head lacerations and a skull fracture.",1
An employee was running electrical wire through a panel box when an arc flash caused second degree burns to his face and wrist.,1
An employee was climbing out of a truck when he slipped on ice and broke his ankle.,1
"An employee was walking when her prosthetic shifted and she fell to the ground, dislocating her hip.",1
An employee was cutting concrete with a saw when the saw kicked back and lacerated his right forearm.,1
"An employee's fingers were in the eye of a hook being connected to a bucket. When the bucket was lifted, the employee suffered lacerations and ligament damage to the fingers. The employee was hospitalized, requiring surgery.",1
"On January 20, 2020, at approximately 11:45 p.m., an employee was walking on a sidewalk to reset a circuit breaker when the employee slipped and fell on ice, breaking an ankle. The employee was hospitalized.",1
"An employee was putting bags in cart for a customer. She then walked backwards to her register and tripped on a rock salt display, causing her to fall. She landed on and fractured her right hip.",1
An employee was drilling a 2-inch hole into a piece of aluminum when the employee's shirt sleeve became caught in the drill filing and pulled the employee's arm into the drill press bench. The employee was hospitalized with a fractured right forearm.,1
"An employee was having a conversation with an excavator operator when the push blade of the excavator fell onto the employee's left foot, pinning it to the ground. He was hospitalized with injuries to his left toes.",1
"An employee was assisting a patient when she tripped on the patient's wheelchair and fell to the ground, landing on her right side and breaking her right hip.",1
"A maintenance crew was working on a belt attached to a chip feeder with the guarding on. After the belt was fixed, the guarding was removed, signaling that the machine was again operational. The injured employee's hand was near the machine at the time, and when it came back on, the employee's hand was injured.  A quarter of the bone in the left thumb was lost due to the injury.",0
"An employee was operating a stand-on mower when suddenly his left index finger was crushed between the handle of the mower and a tree, cutting his fingertip. He was hospitalized and had surgery.",1
An employee mistakenly drank methanol that was in a soft drink bottle and sustained poisoning.,1
"A driver was backing a trailer into a jobsite when the trailer became caught on a road sign. After the road sign was released, it sprung back and struck the injured employee in the midsection. The employee suffered three fractured ribs, a collapsed lung, and internal bleeding.",1
"An employee was walking down the stairs when she stumbled and fell down the stairs, injuring her head and requiring hospitalization.",1
"An employee slipped and fell on ice while exiting a postal vehicle, suffering a broken kneecap and torn muscle.",1
"A crew was exposing a new water line looking for a leak. A trench was excavated near the pipe with a compact excavator, and an employee was exposing the pipe with a shovel.  A piece of dirt from the top of the trench fell on the back of his legs and he suffered a pelvic fracture. The trench was approximately 4.5 feet deep.",1
"An employee missed a step while stepping down from a step stool, causing the employee to fall and sustained a fractured hip.",1
"An employee was using a 16-pound sledgehammer to set formwork for concrete along the side of the street when the hammer struck his right index finger, resulting in a fingertip amputation.",0
An employee was walking in the stockroom and tripped on a furniture skate. The employee fell to the ground and broke a leg.,1
"An employee was putting ingredients inside a grinding machine when a bag fell inside the machine. The employee tried to grab the bag and contacted the auger inside the machine, resulting in a left hand amputation.",0
An employee tripped over an aircraft grounding cord while exiting a scissor lift and fell onto an apparatus near the aircraft and the floor surface. The employee was hospitalized for leg and hip injuries.,1
An employee was struck by a powered industrial truck while standing near a semi-trailer. The employee suffered a broken ankle and back pain.,1
"An employee was struck by a vehicle while operating a stand-on mower on a median island, suffering broken bones in the leg and shoulder.",1
"On January 21, 2020, an employee was assessing an air handler unit that needed new insulation when the employee's left hand came in contact with the belt and pulley on the unit, resulting in a fingertip amputation. The belt and pulley were not completely guarded, and the unit was not locked/tagged out at the time of the incident.",0
"An employee had exited a truck to deliver produce when the truck rolled forward, pinning him between it and another truck. He suffered a broken leg. The brake was not applied at the time of the incident.",1
"An employee was walking down stairs when the employee tripped on the last step and fell to the ground, tearing tendons in the right and left knees.",1
"Employees were processing a pipe on site. A forklift driver lowered the pipe and, believing the forks had cleared the pipe, began to turn the forks to move the pipe. When the pipe started to move, it struck a nearby employee in the left leg. The injured employee suffered leg fractures, requiring hospitalization and surgery.",1
"An employee was using a feeding hose to remove material from a tank when a flash fire occurred within the tank and contacted the employee's face, causing second degree burns.",1
"An employee was rinsing out chemical barrels when sanitizing chemicals mixed with phosphoric acid and produced chlorine gas. The employee inhaled the chlorine gas, suffering a chemical burn in the lungs.",1
"On November 21, 2019, an employee suffered a back strain while climbing a ladder.",1
"An employee was attempting to pull a part out of a press. He went to the end of the press where the belt motor is located and was squeezing the belt when his glove was caught in the pulley. As a result, his right index fingertip was amputated at the nail.",1
"An employee was pulling down the hood of a sprayer and had one foot on the step and one foot on the sprayer frame. The employee was hooking up the strap to the crane on the service truck when the employee's foot slipped.  The employee fell from the sprayer and struck the ground, breaking the hip socket and requiring surgery.",1
"An employee was stepping off the curb when he slipped and fell to the ground, fracturing two fingers. He was hospitalized for surgery.",1
"An employee was attempting to loosen a strap that was on a trailer loaded with PVC pipe.  As he began to loosen the fourth strap, a bundle of PVC pipes fell and struck him on the head, rendering him unconscious. He sustained multiple fractures to the cervical spine.",1
"An employee slipped and fell on ice while walking to a client's house, suffering a fractured ankle.",1
"An employee fell down a flight of stairs and injured both knees, requiring surgery.",1
"An employee was cutting a fire hydrant using a chop saw. The saw's guard struck the employee in the face, lacerating it.",1
"An employee was de-burring metal with an abrasive pad on a CNC lathe. The lathe caught the employee's glove, pulled in his arm, and broke it.",1
"An employee was doing maintenance work at an oven. As he cleaned one of the chains, his hand got caught and his left middle finger was amputated. He was hospitalized, undergoing surgery.",1
"While sorting mail, an employee tripped on a large mail bin and fell to the concrete floor, suffering a broken left femur.",1
"Steam burst out of an autoclave when an employee opened it, causing second-degree burns to the employee's face, chest, and right arm.",1
"An employee was leaving his station for lunch after completing construction of a scaffold. While stepping over a pipe, he tripped and fell, twisting his leg and breaking his left tibia and fibula.",1
An employee was standing outside a trench when the side wall gave way. He fell into the trench and ended up on his knees with dirt up to his waist. He suffered hip and rib injuries and was hospitalized.,1
"An employee was carrying a surgical scope into an operating room. She tripped over a part of the surgical table and fell, breaking her right ankle.",1
"An employee was walking around his truck when he slipped on snow-covered ice and fell, striking his head on the ground.",1
"An employee was on a ladder performing a cleaning operation when he lost his footing and fell onto a hard surface, injuring his back and requiring hospitalization.",1
"An employee was operating an overhead crane. While he was hoisting the crane, the block contacted the upper limit switch. The switch was set off but did not stop the crane's movement, causing the crane's cable to snap. When the cable snapped, the crane block (weighing 91 lbs.) and chain (weighing 43 lbs.) fell 18 feet and hit the employee. He was hospitalized with a broken right foot.",1
An employee fell out of a chair and landed on his knees. He was hospitalized.,1
"An employee's finger was caught under the belt of a plate former carriage, resulting in a partial amputation to the fifth digit of the left hand.",0
"An employee was in a storage closet, applying fire caulk from a 12-foot A-frame self-supporting ladder. The employee fell from the ladder; the employee's head struck the concrete floor and was injured.",1
"An employee was removing a part from the permanent mold machine.  When the machine opened, the employee's glove and fingertip became caught between the ejector plate and airline, resulting in a left middle fingertip amputation. Two other employees helped him release his finger.",0
"An employee was operating a table saw to cut wood. When he attempted to clear debris from the saw, his left hand contacted the blade causing lacerations to his left hand that resulted in an amputation. The blade was unguarded and in motion at the time of the incident.",0
"An employee had finished loading a grain truck and was coming down a fixed ladder when the employee fell approximately 10 feet onto the metal grates of a dump pit. The employee suffered a broken right wrist, lower back, and pelvis.",1
"On January 22, 2020, am employee's truck was impacted by another truck while parked in the safety zone. The employee suffered a broken pelvis.",1
"While dropping fuel, an employee slipped on a small patch of ice and fell to the ground, breaking the left femur.",1
"An employee was performing a final sugar addition to a heated solution of caustic, silver nitrate water when a portion of the mixture ejected from the lid of the 100-gallon reaction vessel and contacted the employee's body. The employee suffered second and third degree chemical burns to the face, arm, back, and leg.",1
"On January 21, 2020, at around 3:00 PM, an employee was fixing a printing press when his right hand fingers were caught between the belt and pulley resulting in lacerations to the index and middle fingers. The middle fingertip was surgically amputated.",1
"An employee was being lifted on an alignment rack when the employee fell from the lift to the ground below, suffering fractures to the ankle, hip, elbow, and finger.",1
An employee was operating the tail end of a material stretcher and actuating the stretcher foot to remove the aluminum profile material. The material remained fastened to the stretcher foot. The employee's left index finger was on the material when the material broke free of the foot and the employee's finger was crushed between the material and the machine. The fingertip was amputated with bone loss.,1
An employee was holding a cell phone flashlight to illuminate a breaker panel while another employee worked on the panel. An arc flash burned the employee's face and neck.,1
"An employee was on a ladder, attaching a metal track to concrete. The employee fell from the ladder, suffering three broken ribs; the employee was hospitalized.",1
"An employee was repairing a flexible cable tray on a production machine. The tray was raised using a bottle jack. The bottle jack kicked out while the employee's finger was in an alignment hole on the flexible cable tray, resulting in a left index fingertip amputation.",0
"A shuttle bus driver was placing safety cones around a bus in a parking lot. He slipped on ice, fell backwards to the ground, and hit his head, suffering an abrasion and a hemorrhage. He was hospitalized.",1
"While helping a client out of a paratransit vehicle, an employee was knocked to the ground and suffered a broken leg.",1
"An employee was loading a roll of paper (500 to 800 lbs.) from a railcar onto a powered industrial vehicle (PIV) when the roll fell on top of the employee's PIV protective cage. The employee raised his hand to protect himself and his fingers went outside of the cage and were crushed between the bar of the cage and the roll of paper. As a result, he sustained a partial amputation of his left index finger and debridement of his left middle finger.",0
"An employee was doing maintenance on a fence weaver machine. The machine activated, and a rotating shaft caught his hand. His right arm was wrapped around the shaft and suffered multiple fractures.",1
"An employee performing preventive maintenance on an excavator slipped and fell to the ground while stepping off the equipment's battery box, fracturing his left ankle.",1
An employee was lifting dishes out of a dishwasher when his body twisted and he injured his back.,1
"On January 22, 2020, a store cashier was helping customers when two masked men came into the store. One of them shot her in the upper right shoulder. She was hospitalized.",1
"An employee was locking a fan motor after making an adjustment when his hand slipped and his finger hit the fan motor blades, resulting in a right index finger amputation.",0
"An employee slipped on a patch of ice while walking from one building to another outside and fell to the ground, fracturing the left fibula and tibia.",1
"An employee was cutting meat on a band saw when the saw blade cut the employee's right index and middle fingers, resulting in index and middle finger amputations.",0
"An employee was operating a handheld grinder when the grinding wheel disintegrated, and the grinder hit the employee's face, lacerating the lower lip.",1
"An employee was operating a cash safe door. While the door was closing, it caught the employee's left index finger, causing a partial amputation of the fingertip.",0
An employee was walking backwards while uncoiling a hose when he stepped into a hole and was burned by steam and hot water.,1
"An employee was operating a rivet machine when the machine crushed the employee's right thumb, resulting in the surgical amputation of the thumb's first digit.",0
An employee was in the elevated platform of a scissor lift pulling a telecommunications cable. He reached out and handed the cable to an employee in an adjacent scissor lift and heard a pop. The employee suffered an abdominal hernia that needed surgery.,1
"An employee was working from a ladder while attempting to install a clamp and hoist onto a metal boot (industrial plow) when the boot shifted, knocking the ladder away and causing the employee to fall approximately 10 feet to the ground below. The employee suffered 7 broken ribs, a lacerated kidney, and internal bleeding.",1
An employee was using a jaw puller in a harvest line. The jaw puller activated and the employee's thumb was bent backwards and broken.,1
An employee was helping install a fence post. The employee's hand was on top of the fence post when a fellow employee struck it with a sledge hammer. The employee suffered a broken hand.,1
"An employee was deburring a part on a CNC lathe when his glove became caught and his hand was pulled into the lathe, resulting in a right index finger amputation at the second knuckle.",0
"Employees were at a dewatering line filling a tank on a subcontractor's truck when the tank pressurized and forced water from a hatch. The pressurized water made contact with two employees. One of the employees was hospitalized with head, back, face, and eye injuries.",1
"An employee was attempting to climb down from a burner table when he slipped and fell 2 to 4 feet to the ground, breaking his right arm and requiring surgery.",1
An employee was helping another employee position a forklift attachment into place when the employee's left middle finger was caught in the positioning hole used to place a pin in the attachment and amputated.,0
"An employee was in training for defensive tactics. As she attempted to perform a hip toss move, she felt a tearing sensation in her lower back. She was hospitalized with a lower back injury.",1
"An employee was troubleshooting a machine when the employee's right thumb was caught in the belt and pulley at the in-running nip point, resulting in a thumb amputation and palm laceration.",1
"An employee was splicing an electric cable in a trench that was 4 to 5 feet deep, 14 feet long, and 4 to 5 feet wide when the side wall caved in and contacted his right leg, breaking his tibia and fibula. He was hospitalized and had surgery.",1
"On 1/22/20, an employee was walking up the icy sidewalk of a residential house when the homeowner's dog barked. The employee was startled and turned to see where the dog was, causing him to slip and fall on the sidewalk. He fractured his right ankle.",1
"An employee was spotting for a skid steer that was loading a bucket into a pickup truck when the employee slipped and fell near the skid steer tracks. The skid steer moved forward and ran over the employee's leg, fracturing the tibia.",1
"An employee was walking through a maintenance shop after completing a DVIR (Driver's Vehicle Inspection Report) when she slipped (possibly on a piece of insulation) and fell to the concrete floor, hitting her head. She suffered a brain injury.",1
"An employee was removing cotton from a lint cleaner. A part in the machine struck the employee's fingers, causing fractures and lacerations.",1
An employee was stapling a piece of wood. The staple gun shot a staple into the employee's left middle finger.,1
An employee was installing new drywall in a bathroom and slipped off the first step of a ladder resulting in a dislocated knee and hospitalization. The leg was amputated above the knee a week later due to poor circulation.,1
An employee was stepping down from a 12-inch-high scale when the employee fell and fractured the right arm.,1
An employee fell while walking down an exterior stairway and tore a quadriceps muscle from the bone.,1
"An employee was exiting the office building and descending the entry staircase when she missed the bottom step and fell onto the sidewalk, breaking her left distal femur and requiring hospitalization.",1
"An employee was cleaning a saw when his hand was caught in the moving blade, resulting in a hand amputation.",0
"On January 23, 2020, an employee used an extension ladder to access the roof of a new one-story house in order to install the dry-in. After stepping onto the roof, he slipped off the roof before he had the chance to connect his lanyard onto the anchor point. He fell about 12 feet to the ground and was hospitalized with a right heel injury.",1
An employee was walking when a reversing forklift struck the employee. The employee suffered internal bruising and a hematoma in the abdomen.,1
"An employee was cleaning the bottom of a grain bin when he stepped on the door of the auger and it became displaced. He then fell into the auger, resulting in a severe laceration and amputation of the lower left leg.",1
An employee working as a finishing operator was using sand paper to clean a spindle roll on a slitter machine. The employee's arm was caught in the spinning rollers. The employee sustained a compound fracture to the right arm requiring hospitalization and surgery.,1
"While exiting a vehicle at a residential home, an employee slipped on ice/snow and fell to the ground, requiring hospitalization for a fractured wrist.",1
"An employee was operating a metal sheet bender machine. He was adjusting a metal sheet. When he pressed the button that engages to hold the metal sheet, his left hand was caught between the two holder components. He suffered an injury to his left hand that required hospitalization and the amputation of his left ring finger.",1
"An employee was working at a tail stretcher operation when he crossed over some equipment and was struck in the leg by a machine's transfer arm. He was hospitalized the next day for a broken leg, requiring surgery.",1
"At about 3:50 p.m., an employee was driving a forklift when it struck another, stopped forklift. She suffered an injury to her left ankle and was hospitalized.",1
"An employee was working on a truck that required a steering arm replacement. The employee released the tie rod and a clip or tab flew out and hit him in the eye, puncturing his cornea. He was hospitalized.",1
An employee walked past a doctor who was using essential oils and had a respiratory reaction.,1
"While walking to a car, an employee slipped and fell on ice. The employee sustained an ankle injury and was hospitalized.",1
"An employee was transporting sulfuric acid in a plastic bucket when the bucket handle failed and the bucket tipped. The corrosive acid contacted the employee's legs, causing third degree chemical burns to the legs and feet.",1
"An employee was using a planer when the employee's left hand contacted the blade, resulting in amputation of the left pinky and ring fingers.",0
"A Tradesmen International employee was moving a delivery chute for a cement delivery vehicle. The chute joint caught his right index finger, causing a soft tissue amputation.",0
"An electrician was on a ladder, working on a lighting circuit. The electrician came into contact with a 277-volt energized circuit, suffered burns to the thumbs and fingers, fell from the ladder, and suffered chest abrasions. The electrician was hospitalized.",1
"An employee was working on a water main. A pipe cap struck the employee's left leg, causing artery damage. The employee was hospitalized.",1
A truck struck an employee while he was jogging as part of physical training. He suffered multiple serious injuries.,1
"An employee was leaving the store when she slipped and fell on ice, breaking her ankle.",1
"An employee was at a coffee station when he tripped on a dustpan and impacted the floor, breaking his right ankle and leg and sustaining a meniscus tear.",1
"A security guard was assisting with an unruly patient when the guard lost balance and fell to the floor, suffering a broken hip.",1
"An employee was using a table saw to cut wood. While the employee was removing an object that was stuck in the saw, the saw caught the employee's glove and pulled the employee's hand into the saw blade. The employee suffered a finger amputation and crushing injuries.",0
"An employee was walking to his car after parking a bus in the parking lot when the employee slipped on ice and fell, suffering a broken hip that required hospitalization.",1
An employee was clearing product from a pump. The employee's right middle and ring fingers were amputated by the pump rotors.,0
"An employee was standing around talking inside the office on ground level when he stepped back, turned, and lost his balance. He fell, struck the floor, and was hospitalized with a broken femur.",1
"An employee was standing near stacked steel beams, using a handheld remote to raise the top beam with a crane. When the beam was lifted up, the bottom beam became unstable and shifted off the dunnage onto the employee's right leg. The employee suffered a compound fracture of the lower leg.",1
An employee was cleaning a grader drum with compressed air. His arm was caught and injured between the drum and the equipment's frame. He was hospitalized to treat a muscle injury.,1
"An employee was holding a door open for someone when it shut on her right hand, amputating the tip of her ring finger.",0
"An employee was driving a stand-up reach forklift with a load elevated in the air. The load caught a ceiling-mounted heater, causing the forklift to tip backwards. The employee's left foot was caught between the forklift and the ground, causing several fractures to the foot and ankle.",1
"An employee was installing roof decking on a warehouse. He fell from the roof decking to the ground about 40 feet below, suffering fractures to the legs, pelvis, and arms.",1
An employee was moving scrap aluminum beams into a stack in a warehouse. His right middle finger got stuck between the beams and sustained an amputation.,1
"An employee was walking from a kitchen to a bathroom after cleaning a fryer with degreaser. He became lightheaded and fell to the floor, breaking his right leg.",1
"An employee was operating a pneumatic shear machine when his left thumb tip was caught in the shear, resulting in a thumb tip amputation.",0
An employee was using a stand-up rebar pipe bending machine. He was grabbing rebar when he was caught in the bending pen. His pinky finger was amputated and the middle and ring fingers were fractured.,0
An employee was cutting strips of metal with a metal shear. The shear crushed the employee's right ring finger; the finger was partially amputated.,0
An employee fell from a second-story balcony when the railing broke.,1
An employee was attempting to jump over a pipe that was being lowered into a bell hole when the employee hit the pipe. The pipe then fell and struck the employee's lower abdomen and hip.,1
"An employee checking a belt on a pulley when the employee's finger was caught in the rotating pulley, resulting in a fingertip amputation.",0
"An employee was delivering propane to a customer's residence. He parked his propane truck on the driveway and connected his transfer hose to the customer's storage tank.  As he proceeded to return to his truck, he slipped on ice that was present on the property. He fell to the icy ground and hit his head.  He slowly got back up and walked back to the propane truck to stop the transfer pump.  At this time, the customer returned home to see the employee leaning next to his truck dazed. He was hospitalized for a concussion and some brain bleeding.",1
A police trainee suffered an exertion-related muscle injury during training.,1
An employee was operating a machine and caught their left thumb in the point of operation resulting in amputation of the thumb tip.,0
Employees had been laying down fire cloth in the engine room to prepare for pipe fitting and welding repairs. An employee fell approximately 18-20 feet into the hull of a floating maritime academy training vessel and was found lying unconscious. The employee was hospitalized with injuries including gashes to the head and thigh requiring stitches and severe hematomas.,1
"An employee was spraying food processing equipment with a hose when the machine started running and caught the hose. The employee attempted to pull back on the hose and the employee's left hand was pulled into the machine, causing a laceration and penetrating injuries to the left hand.",1
An employee was standing inside a building between two loading docks at the steps leading to a lower level.  A package fell off a belt and hit the employee. The employee lost his balance and fell down the steps. He suffered a head laceration and limited movement in his arms and legs due to pressure on his spine.,1
"An employee was installing 10-foot, 500 lb. posts when the employee's finger was caught between the floor and a post, resulting in a partial finger amputation.",1
"An employee was attaching a shackle to a steel plate that was being lifted by a loader when the employee's left thumb was caught between the shackle and the steel plate, resulting in a left thumb amputation just past the fingernail. The employee was hospitalized and had surgery.",1
"An employee was moving a bundle of stainless steel bars. The bars cut the bundle's strap and dropped onto the employee's left foot, causing broken bones.",1
"An employee was moving silo panels when his left thumb was caught in a pinch point between a jib and a strap, resulting in a left thumb amputation.",0
"An employee was attempting to help another employee remove a 70 lb. stop/guide pin from leads. The injured employee's left ring finger was between the leads and the pin when the other employee struck the pin with a sledgehammer to free it. As a result, his left ring fingertip was amputated.",0
"An employee was using a crane to pick up metal strapping bound into a coil. The coil fell to the ground and came undone, smashing the employee's right big toe. The employee suffered a partial amputation.",1
"An employee was clearing a jam in a lamination glue filter. The pneumatic ball valve actuated, catching the employee's left middle finger and amputating the fingertip.",0
An employee was cutting plywood using a table saw. The plywood bounced and the employee's index finger struck the blade causing a fingertip amputation.,1
An employee was shot by a temporary employee while walking across the parking lot.,1
"On January 24, 2020, an employee was removing a plastic ball from the feed throat of an injection molding machine. The employee's right middle finger was caught between the screw and the barrel, and the tip was amputated.",0
"A maintenance employee was attempting to repair/replace an inoperative breaker to a hot oil furnace when an electrical arc flash occurred, causing first degree burns to the employee's hands.",1
"An employee was receiving training on how to operate a pallet jack when the employee was struck by the pallet jack, suffering a broken left ankle that required hospitalization.",1
"An employee was trying to remove a jam from a VH machine when another employee jogged the machine. The employee's left ring finger was then caught in a pinch point between two rollers, resulting in a fingertip amputation.",0
An employee was preparing to receive roof trusses. He was moving from an extension ladder and going onto the tie beams when he fell and struck his head on the concrete below. He was hospitalized with head injuries.,1
"On January 23, 2020, an employee working for AK Steel was starting to pour an electric arc furnace when an explosion inside of the furnace caused molten metal to be ejected from the furnace, striking the employee. The employee was hospitalized with serious burns to her upper body.",1
"An employee was troubleshooting a pump that was not working. The employee was on top of the  piping system checking the flow switch. While troubleshooting the flow switch, the cap was removed and the employee noticed the flow switch was leaking. The employee made contact with electrical parts within the flow switch and a fire started. The employee then jumped off the piping system. The employee suffered a broken left leg and third degree burns to both hands.",1
"An employee was driving an aerial lift into a building along a concrete ramp. When the lift entered the building, its front wheels came off the ramp and fell 10 inches, causing the basket to shoot upward and throw the employee out. He hit the ground and suffered a broken leg.",1
An employee was carrying drinks to serve to customers when the bartender added more alcohol to the drinks and they flared up. The employee received second degree burns to the throat and face.,1
"An employee was sitting on a chair when he leaned back and the chair broke. He fell backwards and hit his head on the concrete floor, suffering a concussion.",1
"An employee was painting the dump door of a dump truck. The door fell shut, amputating the employee's left index fingertip.",0
"An employee was removing a pipe stand roller from a pallet jack when a portion of the employee's middle finger near the area of the fingernail was caught between the base of the pipe stand roller and the concrete floor, resulting in a partial amputation to the middle fingertip.",0
"An employee backed his truck up to a bay door to load stock. While exiting the vehicle, he stepped on a 2-pallet stack, lost his footing, and fell to the ground. He put out his left arm to stop himself. His arm hit the ground and broke. He was hospitalized with a broken left arm and bloody nose.",1
"A paramedic was walking up to the scene of a medical incident when she slipped on ice and fell, suffering a broken right hip.",1
"A longshoreman was unloading I-beams off a cargo ship. The beams were secured with a lashing system composed of wooden 4-by-4s and cables. While the cables were being loosened, a 4-by-4 sprung loose and struck the employee on the hardhat, causing a head injury.",1
"An employee tripped on a toy on the floor in a toy department. She fell to the floor, suffered a broken right elbow, and was hospitalized for surgery.",1
"An employee was pushing a job cart out of a building. The double door slammed shut, catching and amputating the tip of the employee's little finger.",1
"An employee was performing a pre-trip inspection on a vehicle when the employee's gloved right hand was caught and pulled into the engine's rotating belt. As a result, the employee's right thumb was amputated.",0
An employee was applying aerosol lubricant to a crane boom hoist. The employee's left index finger was caught between the boom hoist rope and the fleeting sheave and was partially amputated.,0
An employee tripped and fell while unloading a pallet. The employee suffered a head laceration and a torn quadriceps.,1
An employee was operating a reach truck when it collided with a support beam. The employee's left leg was pinned between the truck and the beam and was broken below the knee.,1
An employee suffered a back strain while moving pallets.,1
"An employee was cutting a door jam with a table saw when the employee's right hand slipped into the moving blade, cutting the hand.",1
"An employee was working from an order picker, pulling a freezer off a shelf. He fell several feet to the ground below, suffering leg and hip injuries. He was hospitalized.",1
"An employee was meeting a prospective client with her sales manager at the prospective client's residence. Upon entering the home, the employee missed a step on the stairs leading to the foyer and fell, fracturing her right hip and requiring surgery.",1
"An employee was working on a hanging furnace while standing on a ladder when the employee fell approximately 4 feet to the floor, suffering a head injury that required hospitalization.",1
"An employee was cutting meat with a band saw when the employee's sleeve became caught, pulling the employee's arm into the saw blade and causing an amputation.",1
"While exiting an elevator, an employee tripped and fell to the same level, broke a hip, and was hospitalized.",1
An employee was putting notches in 2x4 wooden boards with a woodcutting notching machine when the machine amputated two middle fingers and part of the pinky finger on the employee's right hand.,1
"An employee lost sight of the edge of a platform, fell, and landed on his right elbow. His elbow broke and required surgery.",1
An employee lost consciousness due to dehydration.,1
An employee was walking on a stage when he fell approximately 42 inches off the stage to the floor below. He was hospitalized and had to have his spleen removed.,1
"An employee fell to the ground while moving cars for de-icing, suffering a large contusion to the left hip.",1
An employee was walking to her register when she tripped on another employee's walker. She fell and suffered a broken femur.,1
"An employee picked up a hopper with a front end loader. It became unstable and smashed his middle finger, causing an amputation at the end.",0
"An employee was molding a rubber weight on a rubber press. He was attempting to move the rubber weight mold inside the press when the start button was pressed. The machine then crushed his left pinky, ring, and middle fingers.",1
"An employee was operating machinery when their left ring finger was caught, resulting in a fingertip amputation.",0
"An employee was ejected from a ski lift chair while on the platform, resulting in multiple rib fractures that required hospitalization.",1
An employee was cleaning an offline grinding machine when its blade amputated his left middle finger.,1
"An employee was rinsing equipment with a high-pressure hose when he raised one of his legs approximately 3 feet off the ground and his foot entered an opening in the side of the equipment. His foot became entangled with the equipment, resulting in an amputation at the left knee.",1
"An employee was working as a self checkout host. The employee went to help a customer with an override and turned around and tripped over a case of water at the store. The employee impacted the ground, suffering a broken hip that required surgery.",1
"An employee was re-securing a load on the back of a trailer. He fell off the trailer to the concrete 5 feet below, suffering a concussion and abrasions.",1
"An employee was shutting the lid of a cargo bin when the lid fell onto his right index finger, causing a fingertip amputation.",0
"An employee was operating a forklift and got off of it to move a double pallet jack. He leaned forward and grabbed the pallet jack's throttle. The pallet jack then went to the side into racking. The pallet jack and racking struck the employee's right ankle, causing a fracture.",1
"An employee was hooking a chain hook onto a crankshaft buggy that lifts the crane shaft. The buggy moved and smashed his left index fingertip between the hook and the buggy, causing an amputation of the left index finger.",0
"An employee was working inside an enclosure on the overhead roll-up garage door. The power to the door was turned on and the employee was crushed between the door and a wall, suffering four broken pelvic bones. The door had been turned off but not locked/tagged out at the time of the incident.",1
"While taking out the trash, an employee slipped on ice and fell. The employee lost consciousness and suffered a head laceration.",1
An employee was climbing out the back of a truck trailer when he slipped on the icy floor and hit his head on the truck's bumper. His head received a cut that required stitches.,1
"An employee was sweeping the floor by the shipping dock when he attempted to move a molded piece of steel with his hands. The steel then fell on his leg, causing fractures to his leg and toes.",1
An employee suffered a hernia while picking up a steel ramp for a forklift.,1
"An employee was standing on the curb waiting for a bus when her foot became caught in a gap and she fell to the concrete, fracturing her hip.",1
"The injured employee and a co-worker were receiving and inspecting scrap metal. A large scrap electrical cabinet needed to be moved to a different area for processing. Prior to moving it, they wanted to inspect the inside of the large electrical cabinet to ensure there were no unacceptable materials in the box. There was a large electrical control panel on top of the electrical box and it was sitting at an angle. As the injured employee lifted the door, the control panel shifted and fell, striking his left hand. He sustained a laceration of his left hand and a broken middle finger, which required surgery to repair.",1
"An employee was using a step stool while performing automotive work when he slipped and fell, injuring his knee and requiring surgery.",1
An employee was cutting fajitas with a knife and amputated the tip of his left thumb.,1
An employee was cutting metal with a shear machine when the blade amputated the employee's fingertip.,0
An employee was conducting quality checking when his right index finger got caught in between a die and a can resulting in a fingertip amputation.,0
"An employee was securing the forks to a forklift when the employee's fingers became pinched between the mast and the boom on the forklift, resulting in a left middle fingertip amputation.",0
An employee was vacuuming the trunk of a vehicle when another vehicle rolled toward the employee and pinned the employee between the two vehicles. He employee was hospitalized with a fractured right femur.,1
"An employee was walking from a carpeted area to a tile floor when the employee slipped and fell onto the tile floor, suffering shoulder, knee, nose, and mouth injuries that required hospitalization.",1
"An employee was erecting a masonry scaffold when his left index finger was pinched between the cross brace and the frame of the scaffold, resulting in the amputation of the distal phalanx of the left index finger.",0
"An employee was roping a horse off when his hand was caught between the rope and a saddle horn, mangling his right thumb.",1
An employee was drilling an electrical cover when the employee contacted live electrical wires and an arc flash occurred. The employee sustained burn injuries to the face and right hand/arm.,1
"An employee was mixing corrosive chemicals when the chemicals splashed on the employee's face, eyes, neck, chest, and upper extremities, causing chemical burns.",1
An employee was attempting to put a clevis on a section of fiberglass walls stored on a cart. The sections are used to make cooling towers. The employee moved a piece to clear the clevis and approximately 10-12 4'x30' sections fell over and struck the employee on his left femur. The employee was knocked to the ground and the pieces landed on his leg. He sustained a broken left femur that required surgical repair.,1
"An employee was using a core-making machine when the machine severely crushed the employee's left index fingertip, resulting in a surgical amputation.",1
An employee was removing a stuck bottle from a conveyor. The conveyor caught his right index finger and amputated the tip.,0
"A temporary employee was performing maintenance on a depositing machine when a second employee cycled the machine as the temporary employee's finger was in the point of operation. As a result, the temporary employee received an amputation.",0
"An employee was cleaning the outfeed rolls on a press with kerosene and a towel when the employee's right hand was pulled into the roll opening, resulting in a right ring finger amputation.",0
"An employee was working near a metal beam for a concrete form when the rigging slipped and the 42-foot, 500-lb. beam fell on the employee's right foot, causing multiple fractures and requiring surgery.",1
"A traffic control flagger was struck by a truck while standing on the curb, suffering bruised ribs.",1
"An employee placed his right hand on top of a mortar mixer grate to pull the drum back into the upright position when the paddles came down and made contact with three of the employee's fingers, causing a partial amputation of the ring finger.",1
"An employee was sitting in a concrete truck that was stuck in the mud. The back of a second concrete truck was attached to the front of the concrete truck that was stuck in the mud by a ratcheting strap. The connecting strap snapped, flinging the metal ratchet device crashing through the driver side window of the concrete truck. The device struck the employee in the head, causing a forehead laceration that required sutures and hospitalization.",1
An employee was scooping debris with a shovel and pitchfork from a pit for a railcar and putting it into the grapple of an excavator when the employee's leg was pinned between the excavator bucket and a section of train track. The employee received a compound fracture of the left ankle.,1
"An employee was in a basket attached to a forklift. He was approximately 5 feet up when the basket fell, sending the employee to the ground. He broke his arm.",1
"An employee was installing a vent boot on a roof when the employee fell 25 feet to the ground, fracturing the left arm and right heel.",1
"An employee was using a saw to cut a bow blank when the saw lacerated his right index finger, resulting in a surgical amputation down to the middle knuckle.",0
"An employee was working from a scissor lift, helping install a new lighting truss below a false ceiling. The employee fell (along with the ceiling) to the concrete floor about 24 feet below, suffering multiple arm fractures.",1
"An employee was standing on the second landing of a recently poured concrete staircase, cleaning mortar droppings from handrails, when the employee lost balance and slipped/fell down six concrete steps.",1
"An employee was on a ladder installing a tankless hot water heater. While descending the ladder, the employee missed a step and fell, suffering a laceration to the head and a brain bleed.",1
"An employee tripped and fell on a carpeted area, suffering broken bones in the leg.",1
"An employee was using a hammer to set a piece of metal channel into place. His finger was under the channel when it fell into place, resulting in a right index fingertip amputation.",0
An employee was working on a eviscerator in the evisceration department of the processing plant and caught her arm in the machine. The injury required stitches.,1
"An employee was using a table saw when his finger contacted the blade, resulting in a pinky fingertip amputation.",0
An employee was attempting to get on a moving aggregate spreader when the employee slipped and the tire ran over the employee's right foot. The employee's right foot was injured and required surgery.,1
"On January 27, 2020, an employee was setting up an assembler in the assembly department when the employee's fingers became pinched between the die and the roller assembly, resulting in partial amputations of the index, middle, and ring fingers on the left hand.",0
"An employee lost balance while reaching for a swing gate at the top of stairs and fell to the floor, suffering a traumatic left hip fracture.",1
"An employee was transferring chemicals from a 55-gallon container when a flash fire occurred, causing second degree burns to the employee.",1
"An employee, walking down a flight of stairs, fell and struck a stationary pipe object at the bottom landing. The employee incurred serious injuries, including a lacerated spleen, a liver laceration, and a possible fractured rib.",1
An employee was helping a yardman unload a metal material lift from a flatbed truck to the ground using a forklift when the metal material lift fell forward and hit the employee's forehead.  The employee fell to the ground and hurt his neck and back.,1
"An employee was replacing the door tracks on a roll-up door for a storage unit when the tension came off the spring, releasing the door frame. The door frame struck the employee in the face, resulting in potential facial fractures that required hospitalization.",1
"An employee was climbing a ladder with a nail gun hanging off a tool belt when the nail gun trigger hit the ladder, resulting in a nail penetrating the employee's knee. The employee was hospitalized.",1
An employee was sliding a dock section on a table and caught their left middle finger between the section and the table resulting in a fingertip amputation.,1
"An employee was operating a cartoner and feeding a box of product into the machine when paper fell out and became jammed. The employee cycled the machine to clear the jam and the employee's finger became caught in a chain, resulting in a fingertip amputation.",0
"An employee was loading empty carts into a semi-trailer using the lift gate mounted on the rear of the trailer. While he was riding the lift gate up and demonstrating this process to a trainee, he tried to reposition his feet, shifting from one foot to the other. In doing so, he stepped over the lip at the side of the lift gate. His foot then hooked onto one of the bars that allows the lift gate to travel up and down and his leg became caught, causing a scrape and swelling to the calf. He was hospitalized.",1
"An employee was unjamming the a machine when the maintenance operator began to assist in the process.  The maintenance operator activated the machine and it cycled while the employee's hand was inside, resulting in the partial amputation of the left thumb and full amputation of the left index finger.",0
An employee was trimming tree limbs when the employee's cutter hit an electrical line. The employee received an electrical burn to the left hand and right foot.,1
"An employee was assisting a patient, tripped over an electric wheel chair foot rest, and fell to the floor striking a door jamb/frame during the fall. The employee was hospitalized for a subarachnoid hemorrhage.",1
An employee was finishing his daily duties and exiting his delivery truck when the truck rolled into him. He was hospitalized with broken ribs.,1
"An employee was performing preventative maintenance/greasing a chain on a conveyor system when his right index finger was caught between the chain and sprocket, resulting in a fingertip amputation.",0
"An employee was jumping a short distance to push a box farther onto a shelf when the employee's ring became caught on the shelf and lacerated the employee's finger, resulting in a surgical amputation.",0
"An employee was troubleshooting a door machine issue when his right hand entered the point of operation, striking a rotating drill bit and amputating the right ring finger at the base of the hand and the first knuckle.",1
"An employee was using an in-house manufactured utility cart to move 50 metal plates. The plates were stacked on the cantilevered end when the cart tipped and the metal plates slid off, striking the employee. The employee suffered a fractured left foot, tibia, fibula, and ankle.",1
"An employee was attempting to cut a small plate of stainless steel into smaller pieces to weld them. The plate was not inserted far enough, so he pushed the edge of the plate with his right index finger to reposition it. In doing so, his middle finger extended into/between the shear's point of operation as he stepped on the foot pedal actuator. The shear blade dropped down, cutting and causing a partial amputation of his right middle finger.",0
"An employee heard a noise and dismounted from a pallet jack to investigate. The pallet jack continued to roll when she got off and pinned her between the jack and rack, fracturing her left foot.",1
"A maintenance employee had locked a machine out and was preparing for maintenance. The employee was tightening a spanner nut when he bumped the hydraulic oil line. The oil sprayed out of the line and cut the employee's finger, which required 2 stitches and hospitalization.",1
"An employee was moving metal around a manual metal bending machine when his arms were caught in the machine, lacerating both arms.",1
"An employee was operating a power stocker lift. The lift was coming down when the employee stepped backwards and fell approximately 2 to 3 feet to the ground, striking his head and requiring hospitalization.",1
"An employee was on a ladder dumping trash onto trucks. He lost his balance and fell off the ladder, twisting his body and falling to the pavement on his right arm, which was dislocated.",1
"An employee was unloading product from a trailer when the trailer door slammed shut on his finger, crushing it. He was hospitalized and had surgery.",1
"An employee was stepping out of his delivery truck onto the street when he slipped on an ice buildup, injuring his hip.",1
"An employee was walking out onto a new car sales lot when the employee slipped on ice, suffering a broken ankle.",1
"An employee was setting wall forms while tied to a beam. The beam gave way, causing the employee to slide down to the ground level via his lanyard. He landed on his feet and then fell backwards, injuring his back.",1
An employee was standing on a ladder while changing a light bulb and fell to the ground. The employee sustained broken ribs and required hospitalization.,1
"After installing light fixtures in a room of a new 3-story house, an employee opened the door to an elevator shaft thinking it was another room and fell down approximately 36 feet to the ground floor. He suffered fractures to both legs, a vertebra, and an arm and was hospitalized.",1
"The injured employee was working on a ramp behind a manlift. As the manlift was going up the ramp it began to roll back. The employee operating the manlift applied the brakes, but nothing happed. The injured employee was pinned between the manlift and the wall and fractured the right leg.",1
An employee was painting from a scissor lift with a sprayer gun when he fell between 15 and 16 feet from the lift. Fall protection was not worn and the lift's end door was not closed at the time of the incident.,1
"An employee was inspecting an aircraft and tripped on a 3-step stand, fell to the same level, suffered a broken hip, and was hospitalized.",1
"On January 28, 2020, an employee was installing a soffit board on a two-story beach house from a walk board when he lost his balance and fell 10 feet to the ground. He suffered a broken left leg and was hospitalized.",1
"An employee fell off stilts that were 9 feet high and hit the floor during a rehearsal, impacting and injuring his lower back, shoulder, and head.",1
"An employee was working from a scissor lift and wiring a light fixture near a roll-up door when the door was activated and the employee became rolled up in the door. Nearby employees activated the door to release the employee, who fell approximately 10 feet to the concrete floor and suffered broken ribs.",1
An employee was removing nitrogen from a system when a tool malfunctioned and a Schrader pin hit the employee's hand and nitrogen gas got under the skin on the employee's left arm and hand.,1
"An employee was reassembling a valve actuator in the machine shop when a piston rod plate dropped on the employee's right pinky finger, resulting in a partial finger amputation.",1
An employee was untwisting nail wire in a nail maker machine and suffered a right thumb amputation.,0
"An employee was working on a compressor when his wrench slipped, causing him to fall and hit his head on the concrete. He suffered fractures to the head and back.",1
An employee was on scaffolding framing up a fur down (dry wall ceiling) and hanging sheetrock. The employee fell and was hospitalized for broken ribs and a leg contusion.,1
"An employee was up in a gumbo limbo tree cutting it when the tree base snapped and he fell, hitting and fracturing his head. He was hospitalized.",1
An employee was walking in the rain and observed an aluminum container on the ground. The employee picked it up and attempted to see if there was anything in the container. The top came off and exposed the pellets inside to the rain.  The pellets inside the container were highly reactive to water and exploded when the rain entered the container. The employee suffered burns to the eyes.,1
"An employee was preparing to install solar panels at a residence using a 17-foot ladder. The employee was holding onto the gutter when it broke, causing the employee to fall from the ladder to the floor. The employee was hospitalized with a broken leg.",1
"An employee was sweeping debris from the sidewalk when she hit an uneven piece of the sidewalk and fell, fracturing her right knee.",1
"Two employees were removing a meter inside a customer's establishment to perform a meter transfer. The injured employee was lowering the meter when he lost his grip and it slipped from his hands, striking his left thigh. He suffered a ruptured quadricep in his left thigh.",1
"An employee was parked at the end of an aisle with his pallet jack. He asked a forklift driver to reverse in order to make room for him to drive his pallet jack. The forklift driver accidentally drove the forklift forward and struck the employee's left foot, causing a laceration and broken bones.",1
An employee was trimming material on a fabric cutting machine when the machine amputated her finger.,0
"An employee was using a ladder to install cable TV/internet services when the ladder shifted, causing the employee to fall to the floor. The employee suffered a broken left heel, broken left leg, and dislocated left shoulder.",1
"An employee was walking on a car carrier when he fell about 4 feet to the ground, striking his head and back. He suffered hyperextension of the neck, requiring surgery.",1
"An employee was walking through the parking lot when she was struck and run over by a waste removal truck, requiring hospitalization.",1
The injured employee was trying to hold a door open for another employee when the automatic door closed on the injured employee's left ring finger. The employee's fingertip was amputated halfway down the fingernail.,1
"On January 29, 2020, an employee operating a stand-up forklift in the warehouse struck a parked forklift, resulting in a left foot injury and the amputation of two toes.",1
"An employee was working to fit two 1-1/2-inch stainless steel spool pieces at a flanged connection to bolt up. 

To align the two spool pieces, the top section of pipe (10 feet in length) was rigged using a nylon strap choker, attached to a 1/2-ton chain. 

As the employee attempted to move the pipe, the load shifted in the nylon strap, causing the top section of the pipe to drop approximately 1-2 inches, which pinched the injured employee's left index finger in the flanged connection and resulted in an amputation of the finger's distal tip.",0
"An employee was on a stand assisting a setup when he slipped from the stand and struck his head on the edge of the platform, lacerating the left side of his head.",1
"An employee was moving a cart with tomatoes when two carts bumped each other, resulting in amputation of the employee's thumb tip.",0
"An employee got onto a roof and was in the process of installing his anchor to the roof when he slipped down the side of the roof (two stories) and fell to the ground, fracturing his left orbital bones.",1
"An employee was cutting bacon with a 10-inch chef's knife when the blade lacerated the employee's left thumb, resulting in a suspected amputation of the thumb tip.",0
"While descending from a ladder, an employee missed a rung and fell to the concrete ground, suffering cracked ribs and a broken clavicle.",1
"An employee was using a 10-foot extension ladder to hang a sign in the warehouse.  The ladder slipped out from under the employee, who fell to the ground and suffered from a partial fracture to the spine. The employee was hospitalized.",1
An employee was installing a water calibration meter on top of the concrete plant and fell 12 feet from a concrete conveyor to the concrete floor. The employee was hospitalized with a broken right shoulder and a fractured back.,1
The injured employee was removing soil to lay a concrete form when a loader that was backing up ran over the employee's leg and fractured it.,1
"An employee had stepped out of a scissor lift that was approximately 8 feet high onto a steel beam to retrieve a fan. The employee fell off of the beam and landed on the concrete floor, breaking his right knee and left ankle.",1
"An employee was cutting wood with a hydraulic wood splitter when his hand went in front of the cutting section of the hydraulic wood splitter, causing an amputation to the left pointer finger.",0
"An employee was pulling on a green vinyl strap that was part of the sheet skid packaging in an attempt to move the sheet skid to the back of the trailer for the next delivery. The vinyl strap broke, causing him to lose his balance and fall off the back of the trailer, landing on the ground. He sustained a laceration to the back of his head and broke four ribs.",1
"An employee was cutting siding with a circular saw when he hit a wood stud and the saw caught the end of his left pinky finger, resulting in a fingertip amputation.",0
"An employee was moving a pallet of material using a reach truck/powered industrial vehicle when the pallet began falling from the forks. The employee reached out to stop the materials from falling and then dismounted the truck to stop it. The truck continued to move, and his left leg was pinned and crushed between the truck and a nearby railing.",1
"On January 29, 2020, at approximately 10:50 a.m., an employee was setting up equipment in preparation for cable pulling when his finger made inadvertent contact with the duct dog (cable pulling equipment), resulting in a left pinky fingertip amputation.",1
"An employee was operating a dry packaging machine when the machine jammed. As the employee attempted to unjam the hopper, the auger caught and degloved the employee's left index finger, resulting in the loss of the nail.",1
"An employee tripped and fell while unloading a pallet, striking the left leg on a tote. The employee suffered fractured left patella.",1
"An employee came up behind a second employee, who was getting parts off a shelf, to put snow down his shirt. The second employee stood up and turned around, which knocked the first employee over. He fell against a tire and broke his right hip.",1
"An employee was putting merchandise on a mobile cart. As he was taking laundry baskets out of a box to put them on the cart, the cart moved and he tripped over one of the boxes and fell to the ground, breaking his left hip. He was hospitalized and had surgery.",1
"An employee was adjusting the sheeter rollers on a bun divider machine with his right hand. As he was making the adjustment (changing the dough pans), he slipped and his left hand slid into the rotating roller, which was unguarded at the time. His left pinky and middle fingers received lacerations and his left ring fingertip was crushed, resulting in a surgical amputation.",0
"An employee walked to the edge of a retaining wall to throw a chain rigging onto a flatbed truck. He stepped on the edge of the concrete block retaining wall, slipped, and lost his balance, falling approximately 5 feet and landing between the flatbed truck and the retaining wall. He fractured his right tibia.",1
"An employee was operating a hand-held circular saw to cut wood when the saw slipped and his left thumb contacted the blade, resulting in a left thumb tip amputation.",1
"An employee was cutting tomatoes with a knife when he hit a hard spot on the sundried tomato, causing the knife to jump and smash down on his right thumb. As a result, his right thumb tip was amputated.",0
"An employee was moving a box of parts (less than 20 lbs.). She took a step and bumped her right foot into the leg of the staging table, which caused her to lose her balance and fall to the floor. While falling, her left leg became caught on a platform behind a CNC machine. She fractured her left hip.",1
An employee was closing a door and caught their left middle finger in the door resulting in a fingertip amputation.,0
"A USPS employee was pulling a pallet jack when the pallet jack ran over the employee's foot, resulting in multiple broken foot bones and requiring hospitalization.",1
"On January 30, 2020, an employee was quoting repairs on a cooling tower basin. He was standing on the concrete area that the boilers are on, discussing the repairs with the customer and a subcontractor. He attempted to step off of the platform but was closer to the edge than he realized, causing him to lose balance and fall about 20 inches to the ground below. He suffered a broken hip and broken right wrist.",1
"An employee was stocking a shelf when a case fell from the shelf, striking the dead man's switch on his machine. His machine then pinned him to the wall, breaking his left pelvis.",1
"On 1/30/2020, an employee was participating in a race when he fell, hurting both knees and requiring hospitalization.",1
An employee was struck by a forklift that was carrying materials and suffered a lower right leg fracture.,1
An employee was standing on an A-frame ladder installing plastic material over an I-beam before starting to paint. The employee fell off the ladder and sustained two broken wrists and injuries to his back.,1
"An employee was stepping off a truck inside a warehouse, missed a step and fell approximately 4 feet to the concrete floor. The employee sustained a wrist sprain and head trauma.",1
"Two employees were rigging down a cellar pump line while another contractor was rigging down a standpipe line. While both operations were close to each other, the crews were working separately. The injured employee had attempted to stabilize the standpipe with a come-along and forklift prior to rigging the line down, but when one of the hammer unions broke loose, the entire line shifted out of the support stand and fell on his right leg just above his ankle. He was hospitalized with a fractured ankle.",1
An employee was cleaning the flights of the rotary valve. He manually moved one flight to reach another flight to clean it.  His hand slipped and slid past a sharp edge that cut through his cut-resistant glove and amputated his right index fingertip.,0
An employee was mixing paint using a mixing drill. A rag became caught in the mixer and his left pinky finger was caught in the mixer drill and ripped off.,1
An employee was measuring the length of an I-beam prior to cross cutting it on a band saw when his right hand was caught between the remote-controlled pneumatic clamp and the back fence of the saw where the I-beams are secured prior to cutting. Three fingers on the right hand were broken and the employee's ring finger was amputated below the first joint.,0
"An employee was getting ready to unload a truck. He extended the dock plate and was walking onto the truck when the truck driver pulled away to square the truck up, causing the dock plate to fall. The employee fell to the ground, hitting his head and landing on his back. He sustained contusions to his back and the back of his head.",1
"An employee was loading ductwork onto a flatbed trailer when the sliding gate pinched the employee's right middle finger, causing a partial amputation to the fingertip.",1
An employee was checking pigeon traps and fell off the roof. The employee sustained a fractured wrist and three fractured vertebrae.,1
An employee was conducting a visual inspection of a marine vessel inside dry dock. The employee fell approximately 9 feet from a fixed ladder to the bottom of the dry dock and sustained multiple fractures to the left arm.,1
"An employee was mixing masa in the tumbler in preparation for making dough for tortillas and contacted one of the spiral assembly parts with his right hand. The employee sustained lacerations to his thumb, palm and part of right hand.",1
"An employee was changing a grinding wheel when it fell onto his left hand, causing a partial amputation of the left pinky finger.",0
An employee tripped and fell on stairs while delivering mail. The employee was hospitalized for a right hip fracture.,1
"An employee was working on a forklift when the forklift carriage fell from the guide and hit (fell on) the employee. He was hospitalized with a laceration, fractured left femur, and vertebrae fractures.",1
An employee was walking toward a customer to take an order at the deli when the employee slipped on grease from rotisserie chickens that was on the floor and impacted the ground. The employee sustained a fractured right femur.,1
An employee slipped and fell on a wet floor resulting in hospitalization for a left hip fracture.,1
"An employee was carrying a large box of material into the inventory storage area, tripped over a part on the floor, and fell breaking the right femur.",1
"An employee was stepping off the bottom rung of a step ladder, lost balance and fell. The employee sustained a broken pelvis and a broken left wrist.",1
"While walking, an employee tripped and fell face first onto the floor, suffering facial and mouth injuries.",1
"An electrician was retrieving an aerial lift from the dock. While driving the equipment back to the facility, the lift turned sharply, forcing the front right tire off the road and onto a levee. The lift tipped and ejected the employee from the basket. The employee was hospitalized with multiple fractures to the right leg including the shin and ankle.",1
"A security officer was attending to an aggressive dog(s) by the patient entrance to the hospital. During the intervention with the dog(s), the officer was bitten. At that point, the officer discharged a firearm at the dog and the discharged round struck the officer in the left little finger area.",1
"At approximately 3:00 a.m. on January 31, 2020, an employee was operating a delivery truck's lift gate when the employee fell forward off the lift gate after miss-stepping over the edge. The employee fell chest-down on the ground and was hospitalized with four fractured ribs.",1
An employee was skiing and practicing G-turns when a guest skier traversing a slope struck the employee. The employee sustained a fractured femur.,1
"An employee was stocking shelves with new, unopened chemicals. The employee fell over and struck their head on the ground. The employee was hospitalized for a head injury and possible chemical exposure.",1
"An employee was operating a manual lathe, machining an auger journal end. The employee pressed the stop control, and the lathe started slowing down. The employee attempted to visually inspect the part and placed his left hand on the steady rest to get a better view. His hand then slipped and struck the spinning auger, resulting in medical amputation of the left pinky finger.",0
"An employee was stepping out of a crane carrier onto a walking working surface when he slipped and fell off of the crane carrier and landed on a log. He suffered three broken ribs and a bruised lung, requiring hospitalization.",1
"An employee was a welder tasked with moving an idle roller with a forklift used to stabilize ships for welding operations. As he was positioning dunnage under the idle rollers for the forklift, the idle roller slipped, crushing his left foot. He was hospitalized and required surgical amputation of his left big toe tip.",0
An employee's fingertip was amputated by a hedge clipper.,0
An employee was loading his machine (scraper) on a clay slope at approximately 5:10 AM. The scraper hit an uneven surface and jostled the employee in the seat. The employee immediately felt a sharp pain in their back and was hospitalized for a T12 fracture.,1
An employee was opening a gate and caught their left ring finger in the gate resulting in a fingertip amputation.,1
"An employee was removing a 6-foot pipe from a machine when his hand went between the machine turret and the pipe, smashing his right ring finger and resulting in a fingertip amputation.",0
"An employee was removing 65-foot concrete wall braces using a powered industrial truck and a choker sling. He was holding a tag line at the end of the brace. When the brace was removed the balance was uneven. The brace cantilevered and seesawed the employee 20 feet into the air. He struck the ground, fracturing his pelvis.",1
"On January 31, 2020, an employee was tearing down a die and emptying molten metal from a mold when the molten metal contacted the employee, burning his right leg and ankle. He was hospitalized.",1
"An employee had an unknown allergic reaction to something, requiring hospitalization.",1
"On January 31, 2020, at approximately 7:35 AM, the injured employee was inspecting carcasses for contamination on the pre-final rail while another employee was operating a handheld skinner on the opposite side of the carcass. The employee using the handheld skinner started to remove hair on the right side of the carcass at the same time that the injured employee reached to turn the carcass with the left hand. As the carcass was turned, the injured employee's left hand hit against the skinner, resulting in an amputation of the left 5th fingertip down to the first knuckle and a laceration to the left 4th fingertip.",0
"On 1/31/2020, an employee was helping two other employees move a safe down stairs.  The safe slid down the stairs and struck the employee, crushing the employee's abdomen.",1
An employee was repairing a vertical injection press when the bolt broke and the injector unit fell and crushed the employee's right hand.,1
An employee was operating a motorized pallet jack and got wedged between the pallet jack and shelving. The employee was hospitalized for a rib injury.,1
An employee was using a mag drill when his glove was caught in the drill and his left thumb was amputated.,1
"An employee was performing maintenance on a machine conveyor. He was physically checking the rotation of the sprocket and chain when his finger became caught in the chain and sprocket, resulting in a right index fingertip amputation.",1
An employee was using a table saw to cut plywood when the saw blade amputated the tip of his right thumb.,1
"An employee was riding a pallet jack and stopped to pick up his jacket that had fallen off the machine. As the employee stepped off the machine and reached down to retrieve his jacket, the operation controls were triggered and the pallet ran over his left foot. The employee sustained lacerations to the left leg and crushed toes.",1
An employee was unjamming a packing machine and amputated their left index fingertip.,0
An employee slipped and fell on a cement floor resulting in hospitalization for a hip fracture.,1
An employee was reaching into a tuber machine to clean a tape cutting blade when the machine cycled and the employee sustained a left index fingertip amputation.,0
"An employee was in the process of cleaning and setting a 20' steel siderail for a mold while standing on top of the 2.5' high mold. The employee stuck a piece of rebar into a hole of the mold to adjust the siderail's position in the mold. The employee pulled on the rebar and it came out of the hole, causing the employee to fall to the ground and fracture the right femur.",1
"An employee was cleaning a loading belt in a lettuce processing area. A piece of lettuce fell between the belt rollers, and as he was catching it the rollers caught the glove on his left hand. He suffered fractures to the fingers, as well as his left arm.",1
"On February 1, 2020, a maintenance employee was cleaning the roller of a bacon transfer conveyor also known as the precook bacon machine. The employee was scraping a rotating roller with a 2x4 (approximately) scraper while working inside the Ready to Eat (RTE) room. While cleaning, the scraper slipped and the employee's left index fingertip was caught and amputated between the moving roller and a metal bar. The machine was not locked out/tagged out at the time of the incident.",0
"An employee was folding a 45' W by 100' L rubber sheet when she fell backwards, striking her head on the concrete ground and suffering a brain bleed.",1
"An employee's hand was caught in a molding machine, resulting in several broken bones and requiring surgery.",1
"An employee received burns to his neck, face, head, and both forearms after an aerosol paint can exploded, requiring hospitalization.",1
"An employee was moving pallets of products on the warehouse floor. While repositioning an electric pallet jack, her foot was pinned between the pallet jack and an empty pallet. She was hospitalized with lacerations and fractures to the first, fourth, and fifth toes, requiring surgery.",1
"Employees were using an extending boom forklift to move a dumpster. The injured employee was securing the dumpster to the forklift forks with chains. The employee's foot was leveraged against the side of a railing when the dumpster and forklift shifted slightly and pinched the employee's toes between the dumpster and the railing. As a result, two of the employee's right toes were amputated.",1
An employee was attempting to clear a jam in a rotary molder when it partially amputated two fingertips on the employee's right hand. The rotary molder was on at the time of the incident.,1
"On February 1, 2020, a maintenance employee was using a de-greaser containing de-natured alcohol to re-ignite a charcoal grill when the de-greaser caught on fire and flashed/exploded. The employee suffered burns to his arm and face.",1
"An employee was changing out air handler bearings, using a beltway to rotate a motor shaft. The drive belt rolled his gloved right index finger into the pulley sheave, causing the amputation of the fingertip.",0
"An employee fell from a rooftop, suffering two fractured ankles and a chin laceration.",1
An employee was removing blades from a cane knife when the blades amputated the employee's left middle finger.,0
"An employee was unloading concert equipment using an automatic loader. The garage door on a ramp would not open; while the employee was trying to open it automatically, the automatic loader slipped, catching his right foot between the ramp and the I-beam underneath the garage door. His right second toe was medically amputated.",1
"An employee was carrying cold cuts to a shelf when he tripped over a customer and fell to the floor, suffering a broken humerus.",1
"While working with a client on a couch, an employee's leg became numb. When she stood up from the couch, she lost balance and fell, breaking her hip and pelvis.",1
"An employee was snowboarding down a ski slope. The employee collided with a guest who had come to a sudden stop, and a two-way radio punctured the employee's abdomen and caused trauma to the spleen.",1
"An employee was walking into work from her car on 02/03/2020 when she slipped and fell on ice in the parking lot, fracturing her leg.",1
An employee was overcome by carbon monoxide while working behind a counter.,1
"While walking into work, an employee slipped on ice that was on a sidewalk. The employee fell, suffering a broken ankle, and was hospitalized for surgery.",1
"An employee was cleaning up the hardwood shaker area and attempted to pull a piece of metal out of a conveyor. The piece of metal then severely lacerated the employee's left thumb, resulting in a surgical thumb tip amputation. The conveyor was running at the time of the incident.",0
An employee was operating a band saw to cut meat when the band saw lacerated and fractured her right middle and index fingertips. She was hospitalized.,1
"On February 3, 2020, an employee was checking whether a recirculation pump was clean when the pump started. The pump's blade then partially amputated his left ring finger (entire nail area).",0
"An employee was changing a tire on a school bus. While the spare was being lowered from under the bus, the ratchet strap came loose and pinched off the tip of the employee's index finger.",0
"An employee was directing trucks at the company site yard. A truck ran over his feet, breaking the left one.",1
"An employee fell off a 4-foot scaffold to the floor, suffering a broken leg.",1
An employee was struck by a 50-pound bag of onions while trying to free a stuck pallet on rolling racks. He suffered a spinal cord injury that caused paralysis.,1
An employee's middle finger was amputated by the hoist on a truck.,0
An employee was clearing metal debris from a press. The ram came down onto her forearm and broke it in two places.,1
"An employee was walking down stairs. She fell at the last step, breaking her lower left hip.",1
A maintenance employee was in the shop cleaning up for the day when he took a juice container from a tool bucket and ingested it. He realized that it was not his drink and had a strange taste. He became ill and required hospitalization.,1
An employee was cleaning a rotating chain and sprocket using a cloth when his right ring fingertip was amputated.,0
"An employee was preparing to weld the bottom flange on a steel channel when the steel channel fell on and smashed his middle finger, resulting in a finger amputation.",0
"An employee was taking a piece of cut material off a hydraulic vise machine and asked a second employee to help. The second employee accidentally pushed the wrong button and activated the machine. The injured employee's hand was crushed between points of contact on the hydraulic vise, resulting in a partial amputation of the left ring finger and a crushed middle finger.",0
"An employee fell from a ladder to the ground, suffering a head contusion and concussion.",1
An employee tripped over a bollard on ground level while walking and suffered a facial injury to the right cheek.,1
"An employee was climbing a stepladder on a trailer. The employee fell from the ladder to the ground about 3 feet below, suffering a fracture near the right eye, a broken pelvis, and broken ribs.",1
"An employee slipped on ice and fell to the ground, suffering bruising.",1
"An employee hooked up a hose and then tripped over it, fracturing the right hip on the ground.",0
"While getting out of her car, an employee slipped and fell to the parking lot ground. She suffered a broken arm and was hospitalized.",1
"At about 8:00 a.m. on February 3, 2020, an employee was cutting a 2-by-4 with a circular saw. The saw hit a knot, jumped, and struck the employee. It partially amputated his left thumb (below the nail) and lacerated his left index and middle fingers.",0
An employee walking through a parking lot to go to work slipped on ice and fractured his left leg.,1
"On February 3, 2020, an employee was dumping a scrap hopper of metal into a larger hopper. The scrap hopper started to slide down the forks, and the employee's fingers were caught between the forks and the scrap hopper. Two of the employee's fingertips were amputated.",0
"An employee slipped on a wet floor in a room and fell, breaking his left hip.",1
An employee was on a ladder retrieving parts in a back storage building when he fell off the ladder and landed on the floor. He was hospitalized for leg fractures.,1
"Two employees had lifted a 200-pound hatch and attached a gas shock to the hatch assembly (to be prototyped as a hold-open device). A third employee reached up to pull on the hatch and determine the force needed for the hatch to close with the gas shock in place. The tack welds that held one end of the gas shock broke, causing the hatch to close on the employee's right hand. The employee's hand and fingers were broken and a tendon and an artery in the hand were torn.",1
"An employee was building an electrical rack (support rack) with an 8' by 20' steel plate (2,200 lbs.). The employee was helping to hold the plate vertically while a forklift driver was trying to turn it over when the forklift bumped the steel plate, causing it to fall on top of the employee's legs. The employee suffered a broken right tibia, fibula, and femur.",1
"While exiting the doghouse of a nitrogen unit, an employee fell from a ladder to the ground, suffering a back injury.",1
"At about 10:45 p.m. on February 3, 2020, an employee fell while pulling a pallet positioning cart into place to load cardboard into a packaging machine. The employee's head struck the concrete floor, causing a concussion and a laceration that required three stitches to close. The employee was hospitalized.",1
"On February 3, 2020, an employee slipped and fell while stepping over some snow. He suffered a broken lower right leg.",1
An employee was repairing/troubleshooting a portable pressure washer whose belts were seizing up. His right hand was pulled into a nip point between the belt and pulley causing a partial amputation of his right middle finger. He was hospitalized for surgery.,1
An employee was performing a rescue bag safety check and simulating a fall/recovery that resulted in an actual fall of approximately 15 feet. The employee suffered fractured heels. Fall protection was not attached at the time of the incident.,1
"An employee was leaving a client's home after delivering food. While stepping down in the icy conditions, the employee fell from the porch to the ground and suffered compound fractures to her left leg. She was hospitalized.",1
An employee was using a leaf blower when the rotor cut her left index finger. She was hospitalized.,1
An employee fell in the parking lot at a satellite location and fractured a hip.,1
An employee tripped while measuring the length of a beam. He fell to the ground and broke his right arm.,1
An employee was walking through the parking ramp from her car and was struck by a vehicle going 5-10 mph. She suffered an open fracture on the right leg.,1
"On February 3, 2020, an employee was loading a snow pusher attachment onto a trailer for transport when the employee's hand was crushed by the snow pusher, resulting in amputated fingers.",0
"A security guard was assaulted by a homeless person with a pipe while walking around the building, suffering a head injury.",1
"An employee was unloading new equipment from a pallet skid. The employee was removing the strapping from a panel when it became dislodged from the transportation skid and began to tip. The employee attempted to balance the paneling but succumbed to the size. The panel continued to tip and caught the employee's finger between the panel and the parked forklift's mast, resulting in a partial amputation to the right ring finger from the nail bed to the tip.",1
"An employee was returning to work from lunch. While talking to another employee on the other side of a closing access gate, the employee leaned against the gate before it completely stopped. His left hand was caught in the top roll bar of the gate, crushing the left fourth digit and requiring an amputation of the tip.",0
"An employee was closing a gate when the employee's left hand was pinched between the gate's roller, resulting in a broken left hand and a laceration.",1
"An employee was walking down the stairs when she missed the last step and fell to the ground, breaking her right femur and requiring hospitalization.",1
"An employee was on a ladder stocking items when the employee fell off the ladder to the floor, suffering a head injury.",1
An employee was using a bailer when it crushed his left hand. The ring and middle fingers were medically amputated.,0
An employee was operating a bending machine. He was putting pieces of trim in the machine. His fingers were on the top of a metal piece when the machine was activated via the foot pedal. The machine amputated his left index finger and crushed his right index and middle fingers.,0
"An employee was stepping off a ladder at a client's home. The ladder slipped out from the employee, who fell to the ground, suffering injuries to the back and buttocks. The employee was hospitalized.",1
"An employee was taking out a small trash cart. The employee picked up the cart to dump the trash, and the cart slipped out of the employee's hand. The employee's left middle finger was caught between the cart and a dumpster, sustaining a partial amputation.",0
"An employee was performing nursing rounds and caregiving activities for patients at the psychiatric unit of the hospital. A patient pulled the fire alarm in an attempt to escape, and threw water on the floor behind him as he was running. The employee ran after the patient, caught him, and brought him back to the unit. The patient became combative and bit the employee's finger and both of them slipped on the water and fell to the floor. Once the patient was secured back in their room, the employee went to the emergency room for a laceration he sustained when the patient bit his finger. The employee was then hospitalized for a heart attack.",1
"An employee was operating and reversing a standup forklift. The forklift collided with a stationary pallet jack, resulting in a left ankle and heel contusion. The employee was hospitalized.",1
An employee was adjusting a belt guide under a cutting machine. His right hand was pulled between two rollers and the index and middle fingers were injured.,1
"An employee was going down the stairs of a school bus when she slipped and fell, suffering a broken right femur.",1
"An employee was doing maintenance on ventilation fans. A fan belt pulled his left hand toward a pulley, where the tip of his middle finger was amputated.",0
"An employee was installing flashing materials on a second-floor roof, slipped, and fell to the ground. The employee was hospitalized for fractured ankles.",1
"On February 4, 2020, an employee was coming down off the rooftop of a building after checking on a humidifier issue on an air handler. The employee climbed down from the roof via a fixed ladder. In order to close the roof hatch, the lock must slide out. When the employee slid the lock, the hatch was caught by the wind and came down. The employee's finger was caught between the hatch and the frame, resulting in an open fracture of the left index finger/partial amputation.",1
"A forklift was carrying a double-stacked load approximately 12 feet high. The load fell while the forklift operator was attempting to stage the pallets, striking an employee working in the area. The employee sustained a broken ankle and elbow and a head laceration that required 24 staples.",1
"An employee turned to reach for container lids, fell to the floor, and landed on her right elbow. She was hospitalized with a fractured elbow.",1
"An employee was holding a part to deburr it on a drill machine when the employee's gloved hand became caught in the drill, resulting in amputations to two fingers.",1
A employee was operating a standup forklift when it malfunctioned and threw her into a storage rack. She suffered an 8-inch cut on the arm that required surgery.,1
"On February 4, 2020, an employee was bent over to re-stock a lower bin/shelf when he stood up and struck his head/face on a plastic shelving bin. He suffered a subdural hematoma and acute subdural bleed over a chronic bleed in the frontal lobe of the brain, requiring hospitalization and surgery.",1
"An employee was on a ladder repairing a light fixture. The employee fell to the ground while coming down the ladder, detaching the muscle in both knees.",1
"An employee was on a step ladder changing belts out on an exhaust fan for preventative maintenance when he reached to steady himself and his left pinky finger was caught between the fan's belt and pulley. As a result, his pinky fingertip was amputated. The fan was turned off but still turning at the time of the incident.",0
"An employee was attempting to blow out the core box mold to make sure it was clear from residual sand when the machine cycled unexpectedly, pinching his left index finger between the pin and the cup. His finger was amputated at the first knuckle (mid-nail). The machine was in automatic mode at the time of the incident.",0
An employee was doing maintenance on a feed auger. The auger activated and amputated the employee's right index finger at the middle joint.,0
An employee tripped over a plastic tote while pulling a customer's order. The employee fell and fractured the left hip.,1
"An employee was unjamming a log on a reject log deck. The employee slipped and the chain conveyor caught his right foot, lacerating the foot and ankle.",1
"An employee was running the breading machine. He looked into the product entry opening and saw breading had clotted up inside. He was attempting to remove the clot when his right hand contacted a conveyor belt flap inside the machine, resulting in a right middle fingertip amputation.",0
"An employee was starting up a horizontal injection machine when the employee's right arm was caught by the park takeout area chute, resulting in an arm fracture.",1
"An employee had completed measuring the second floor of a new residential construction project for insulation and was stepping onto the top tread of a temporary staircase to go down to the first floor. When he stepped down and placed body weight onto the top tread, the staircase gave way, causing him to fall approximately 16 feet into the basement. He struck the back of his head on the basement floor or plywood on the first floor, rendering him unconscious. He received four broken ribs, a broken scapula, a broken clavicle, and broken vertebrae.",1
"An employee was attempting to clean a conveyor machine part when his left index finger became caught on the conveyor, resulting in  the amputation of his fingertip. The conveyor was running at the time of the incident.",0
"An employee was attempting to remove a mirror off a wall from a 6-foot ladder when the mirror fell and struck the ladder, causing the employee to fall from the ladder to the ground. He suffered a right femur fracture.",1
"At about 1:00 p.m. on February 5, 2020, an employee was disassembling a 40-gallon water expansion tank to scrap it. Pressurized air from a bladder in the tank discharged when a flange bolt was removed, causing the flange to strike and injure the employee's face.",1
"An employee was stringing film in a packaging machine during a product change-over when his right hand entered the area of the machine that cuts film, resulting in an amputation to the right ring fingertip.",1
An employee was descending a tree using a rope tied at the top. The knot came undone and the rope and the employee fell to the ground. The employee suffered a broken right leg and wrist.,1
"An employee was working on an overhead garage door opener, reprogramming the controller. He was approximately 5 to 6 feet up on a 10-foot A-frame ladder when the door was opened. He reached for the door and lost his balance on the ladder, falling to the concrete floor. He suffered a broken right tibia and fibula and a right shoulder rotator injury.",1
"On February 5, 2020, at approximately 11:45 a.m., an employee was operating a stand-up forklift when his foot made contact with a storage rack as he drove past it. He was hospitalized with four fractured toes of the left foot.",1
"On February 5, 2020, at approximately 11:46 a.m., an employee was slicing ham on a manual slicer in the employee dining room when his thumb contacted the blade, resulting in a severe laceration and possible amputation.",0
An employee was pulling a cart loaded with aluminum bars inside. A caster hung up on the floor and the cart tipped over onto his right leg. He suffered a broken right femur.,1
"An employee was pulling a 150-200 lbs. wheeled fire extinguisher unit up a 6"" lip when he lost his balance, slipped, and fell backwards down a nearby grading of stairs. The wheeled fire extinguisher unit fell with the employee and landed on his right hand. His right hand sustained multiple injuries including a broken index and middle finger.",1
"On February 5, 2020, an employee was training a new employee on a notcher machine, which creates half moon-shaped notches on pallets. The employee changed the setting on the machine to create notches on 50-inch long lumber. The machine then jammed and he immediately pushed the E-stop button. He attempted to remove the jammed piece of wood with his left hand when the machine's blade caused an amputation of his left thumb tip and index fingertip with bone loss.",0
"While loading and positioning a new empty scrap box onto a line, a fork truck accidentally struck the corner of the box.  This caused the empty box to shift, striking the employee who was at the controls of the lift for the box. The employee sustained a fractured pelvis and was hospitalized.",1
"An employee was stocking shelves using a top stock ladder cart when the employee fell from the third step (approximately 29 inches) to the ground, suffering neck and back injuries that required hospitalization.",1
"On February 5, 2020, at approximately 4:30 PM, an employee was holding a rigging chain that was part of a drill bar set. The load was released, causing the rigging chain to swivel. The chain hook caught and crushed the employee's left middle fingertip, resulting in a medical amputation.",0
An employee was cleaning a machine's feed rollers when his left hand became stuck and injured in the rollers.,1
"An employee was using an overhead crane to put a piece of metal scrap in a dumpster. A stack of beams turned over and pinned the employee, injuring the employee's legs. The employee was hospitalized.",1
"An employee poured a diesel fuel additive into his truck to prevent the fuel from gelling up in extremely cold weather. Afterwards, he placed the half-emptied bottle in the cab of the truck. While driving the truck he became ill due to exposure to the diesel fuel additive.",1
"An employee was entering the building carrying a briefcase and his lunch when he lost his balance while opening the door. He fell down six outside steps, resulting in a fractured arm and contusions to the head and knee.",1
"An employee was filling the cup and lid dispensing mechanism of a packing machine when the lids became jammed. She was able to remove all lids that were stacked in the dispensing mechanism, but one lid was jammed between the stacking mechanism and the lidding stomper. As she attempted to remove this lid, her right index fingertip was pinched between the lid stomper and the rotating table (nest plates), resulting in the amputation of the fingertip right above the nail bed.",0
An employee was grinding a rubber roller on a manual lathe. The employee's right hand came into contact with the grinding wheel and the employee's right middle and index fingers were partially amputated.,0
An employee was loading 55 bags of mulch in a trailer when he slipped off the trailer to the ground and broke a bone in his right shoulder.,1
An employee suffered a foot injury while driving a forklift.,1
"On February 5, 2020, at approximately 8:45 a.m., an employee was operating a forklift. While backing-up the forklift and making a left turn, the employee's left foot was caught between a guardrail and the outside frame of the forklift, resulting in fractures to the 4th and 5th distal bones of the left foot. The employee was hospitalized and had surgery.",1
"On February 5, 2020, an employee was running a rewind slitting machine when his left arm was caught in between the rollers, crushing his left arm up to the elbow.",1
An employee was using a power washer when it slipped from his hands and cut his right forearm.,1
"An employee was stocking shelves from a ""high low"" powered industrial vehicle and fell onto the warehouse floor. The employee suffered a broken hip, elbow and ankle and a head injury.",1
"On February 5, 2020, an employee was rolling up a hose to load it into a fire truck when the hose jerked forward and jolted him. He suffered a hernia, requiring hospitalization and surgery.",1
"An employee was working near a rebar cage when it came loose and struck the employee. The employee suffered brain bleeding, fractured vertebrae, and broken ribs.",1
"An employee was walking toward the back of the store when the employee slipped and fell on the wet floor, which a third-party was stripping. The employee was hospitalized with a head contusion that required staples and three injured ribs.",1
"An employee fell while retrieving a part from an aisle and struck his head on the floor, losing consciousness.",1
"An employee was on an A-frame ladder, changing a light ballast. The ballast broke free and hit his right eye, cutting it; he fell off the ladder and suffered a broken right leg.",1
"Two electricians were troubleshooting an HVAC (condenser) unit in a control room. Both employees went to the control room and applied group lockout to a single disconnect rated at 250 VDC power. After locking out the power to the control room and condenser unit, the employees began troubleshooting several deficiencies they observed while looking through the control panel. After repairing those items, the two employees removed the locks and validated that the repairs were working. The employees observed everything working as required except the HVAC compressor. The injured employee went up to the condenser area on an elevated walking surface that was covered in blaze which is a byproduct of the coke produced at the plant. The accumulation of blaze created an uneven surface. The employee had to remove an exterior covering or guard to validate that 250 VDC was coming from the thermostat to the junction box on the compressor motor. The employee squatted down and lost his balance before checking for 250 VDC. The employee reached to catch himself and in doing so grabbed the belts that drive the compressor motor. When contact was made, the motor began running and the employee's left hand was pulled through the pulleys amputating his left middle and ring fingers.",0
An employee was moving a mobile conveyor for her workstation (a 300-ton press). The employee's left ring and little fingers got caught on the conveyor and the fingertips were amputated.,0
"An employee was working on an assembly line when he attempted to free a pallet that was stuck in the pallet elevator. When he released the pallet, a proximity switch was activated, causing the machine to cycle. His left arm was then caught between the pallet and the elevator, resulting in a lower left arm fracture.",1
"An employee was making a delivery using a liftgate trailer when he lost his footing on the liftgate step and fell to the concrete ground, requiring hospitalization.",1
Alloy from a crane hook piece flipped onto an employee's left hand and pinched off the tip of the ring finger.,0
An employee was hanging a cable TV drop on a customer's home. The employee fell onto the driveway and suffered broken ribs.,1
"An employee had been driving a truck. He stopped and climbed up a dumpster. He then slipped and fell approximately 5.5 feet from the dumpster, suffering a head laceration and left knee injury.",1
"On February 06, 2020, an employee was cutting rebar using a rebar machine when the machine was inadvertently activated via the foot pedal, resulting in the amputation of his left middle finger.",0
"An employee was pushing a cart with manufacturing materials in boxes. The cart went over a cleanup hose and tipped over; the employee fell onto it, suffering a broken right leg.",1
"An employee slipped on a truck's lift gate and fell, suffering broken ribs and a ruptured spleen. The employee was hospitalized.",1
"On February 6, 2020, an employee fell from a ladder to the ground about 20 feet below. The employee suffered broken bones and was hospitalized.",1
An employee was using an electric pallet jack to move inventory. His foot was pinned between the pallet jack and a pallet.,1
An employee was taking care of a client in her home. The house caught fire. The employee suffered smoke inhalation while trying to get the client out of the house. The employee was hospitalized.,1
An employee was carrying linen through a door when the door closed on his right hand. His little fingertip was amputated.,0
"On February 6, 2020, an employee was clearing a jam in an envelope folding machine when his right index finger was amputated in the machine's cylinder.",0
"An employee was crimping wire ends. The handle on the crimper machine kept getting stuck; as the employee tried to get it to release, it smashed and lacerated the employee's left middle finger.",1
"An employee dismounted from a pallet truck, which then moved. Its handle pinned the employee against a rack, causing a ruptured spleen.",1
"On February 6, 2020, an employee slipped and fell on ice in the parking lot, breaking an ankle and requiring hospitalization.",1
"An employee was cutting slat boards with a cut-off saw. The saw/guard control was activated while her right hand was under the pneumatic guard. The guard came down and the saw blade started and came up, amputating her right index, middle, and ring fingers and the tip of the little finger.",1
"An employee was on a delivery truck, helping a forklift operator unload it. He slipped and fell from the trailer, suffering fractures to the right tibia and fibula.",1
An employee was walking down stairs when she fell and broke her leg.,1
An employee was snowboarding downhill to report to his lift station. He suffered a concussion and a broken jaw.,1
An employee was operating a printing machine. The machine's moving parts amputated the employee's right middle finger at the first knuckle.,0
"An employee was snowboarding down a mountain after his shift. He collided with an ascending snowmobile, suffering a broken femur.",1
"An employee was removing wood cladding from the ceiling when a piece fell and struck him on the hardhat, knocking him down. He sustained a concussion.",1
An employee was testing a fan when its blade cut off the tip of the employee's middle finger.,0
"At about 10:30 a.m. on February 6, 2020, an employee was delivering bulk oil to a customer's property. The employee suffered a hernia while pulling open a large, heavy shed door and was hospitalized.",1
"An employee was delivering mail at a residence. The employee slipped on ice while walking down a ramp and fell to the ground, suffering a broken foot.",1
An employee jumped down from a garbage truck and was pushed into a garbage pile by a bulldozer. The employee suffered a broken femur and lacerations from the dozer's bucket.,1
An employee knelt on a pebble while stocking bottom shelves. His left knee became infected.,1
"While leaving a production line, an employee tripped on a pallet and fell, suffering a broken left femur.",1
"An employee was attempting to remove debris from inside a kiln. His right wrist and forearm were pulled into a chain and sprocket, sustaining lacerations.",1
An employee was working from a walk board that was elevated by two A-frame step ladders to place metal sheeting on the roof of a newly constructed protective structure for an outside air compressor. The employee fell about four feet from the walk board and was injured.,1
"An employee was driving an ATV when it ran over a fallen tree branch. The branch popped up and went through the ATV's floor, striking the employee. The employee suffered a broken arm, a bleeding spleen and liver, and a head laceration.",1
"An employee was at the back of a building, unloading a truck of goods using a forklift. A truck entered the back driveway (followed by a police car) and struck the employee on the forklift. The employee suffered internal bleeding.",1
"An employee was trying to reinstall a cover on a machine she was operating. A machine belt caught her glove and pulled in her left hand, causing a partial amputation of the index finger.",1
"An employee was on a 5-foot mobile platform removing window tint. He fell from the platform, suffering a broken fibula and a head injury that required seven stitches.",1
"An employee stepped out of a forklift, which then pinned the employee's leg.",1
"While carrying towels, an employee slipped on liquid air freshener on the ground and fell, suffering a broken leg.",1
"An employee slipped on ice in a parking lot and fell, suffering a broken ankle.",1
"On February 7, 2020, an employee was running an overhead conduit pipe from a 6-foot A-frame ladder when the ladder's spreader bar came off, causing him to fall about 4 to 5 feet to the ground. He fractured his right elbow and was hospitalized.",1
"An employee was walking down the inclined portion of a covered parking garage surface. The employee slipped and fell on ice, suffering a broken left ankle.",1
"An employee was grabbing some insulation. Its weight shifted, causing the work knife in his hand to lacerate his stomach.",1
"An employee was moving a pallet with a piece of equipment on it. The pallet started to shift and the equipment struck the employee's left hand and arm, causing a fractured wrist and a large cut on the arm.",1
"An employee was picking up a patient from the hospital. As the employee was transferring a wheelchair to the van, the patient slipped. The employee strained herself while trying to lift the patient. The employee sat down and experienced chest pain.",1
"An employee tripped and fell in the parking lot while walking to a car, fracturing the right leg.",1
Two employees were removing fence chain links at an event area. The fence chain links came down and amputated one employee's fingertip.,0
"An employee was connecting a trailer to a truck. He lowered the trailer's landing gear so the trailer could be connected. The landing gear handle sprung back when released, striking his right arm below the elbow and breaking it. He was hospitalized.",1
"An employee was operating and standing on a dock plate when he slipped. While trying to catch himself, his right middle and ring fingers were pinched in between the plate's joint and lip, causing an avulsion to the soft tissue on the fingers.",1
"An employee was opening a store. While marking her way toward the alarm to disarm it, she slipped and fell on the tile, suffering a broken right leg.",1
"An employee was trying to clear a jam from a welding machine. When the jam was cleared, the machine smashed the employee's right middle finger, causing the amputation of the fingertip.",0
"An employee was walking through entrance sliding doors when the employee tripped on a mat that was in the doorway and fell onto the floor, fracturing the right knee.",1
"On February 7, 2020, an employee was operating an up-cut saw to cut 2 x 12's when he made contact with the spinning circular blade, resulting in a partial amputation to the right index finger.",1
An employee was driving an off-road dump truck at a construction site. The truck went into a hole in a snow-covered area; the employee suffered cracked ribs and a punctured lung and spleen.,1
"An employee and the company owner were working in aerial lift buckets, converting a single-phase line to a three-phase line. The employee came into contact with an energized line and suffered burns to both arms, both elbows, and the right hand.",1
"An employee was sweeping a bedroom on the second floor of a new-built residence. She backed into a hallway and fell from a balcony in a place where the guardrail had not been completed. She landed about 12 feet below, on stairs at the bottom of a stairway; she then rolled down to the floor. She suffered three broken ribs on the left side, as well as a fractured lower-back vertebra.",1
"An employee was working in a plant's coating area where pipes came down a rack. A 24-inch pipe rolled down the rack and did not stop at the bumper, rolling over the employee's entire body but stopping before reaching the head. The employee suffered a broken right leg and was hospitalized.",1
"On February 7, 2020, an employee collapsed while running during training due to dehydration, resulting in acute kidney damage and hospitalization.",1
"An employee was placing a 4-inch by 8-inch piece of sheet metal in a punch press. When the press was activated, the metal shifted and pinched his glove and the tip of his right index finger against the fiberglass guard on the machine. He suffered an amputation to the finger.",0
"A an employee was cycling a brake press when it caught the tip of her right thumb, causing an amputation to the thumbtip.",0
An employee fell while walking near a trailer. Her head struck the trailer and was injured.,1
A bakery machine roller crushed an employee's arm. She was hospitalized.,1
Two employees were repositioning a patient in bed when one of them suffered a back injury.,1
An employee was standing on a sidewalk in front of the building when he was hit by a stray bullet during a police chase of a suspect who was running down the street. He suffered a head injury and was hospitalized.,1
"An employee was on a scaffold 6 feet high, filling wall cavities with a pump truck hose, when the hose hit him in the face and knocked him to the ground. He was hospitalized with head trauma.",1
"An employee was troubleshooting a die cast machine. The top part of the die plunged at high velocity and hot metal was expelled, causing second- and third-degree burns to the employee's right arm, chest, and face.",1
An employee was operating a hydraulic press to straighten out a rolling cart when their right pinky finger was pinched in the press and the fingertip was amputated.,0
"An employee was conducting a security patrol when they slipped and fell on ice on a walkway, sustaining a fractured ankle.",1
"At 5:15 AM, the crew had started drilling horizontal holes in an island slab. At 5:45 AM, an employee noticed a hole had been drilled 1/2 inch off from the correct location. To correct the issue, an employee grabbed a drill, thinking that it had stopped running, but the drill was still on. The employee's glove was caught in the drill bit resulting in an amputation of the top of the employee's middle finger.",0
"An employee was pushing a cart that was full of water. The cart got hung up on some carpet and the employee flipped over the top of the cart and landed on her back, sustaining a back injury.",1
An employee was working the tray line and turned to reach for an item when she tripped and fell sustaining a broken hip.,1
"An employee was sitting in a chair at the parts counter. When he pushed back away from the counter, the chair tipped over causing the employee to fall onto the floor and fracture a hip.",1
An employee was cutting a fallen tree when his feet became entangled in the branches. The employee fell backwards and broke his left femur.,1
An employee was performing preventive maintenance on an overhead ground beef take-up conveyor and its motor/gearbox assembly. The employee's left arm was caught in the moving conveyor and skin was burned/removed.,1
An employee was helping a discharged patient walk out of the emergency room. The patient started to fall and the employee went to brace the patient using her foot and felt a pop in her back. The employee was hospitalized with a back injury.,1
"An employee was standing near a cannon-type heater trying to warm himself. The employee's shirt ignited due to contact with the heater. The employee sustained second degree burns to the left front, side, and back torso, and the left thumb, fingers, and palm.",1
A football player was blocking during an offensive play when an opposing player fell onto him and dislocated his left knee.,1
An employee was struck by a forklift during offloading operations and sustained a broken lower leg and ankle and five broken ribs.,1
"On February 9, 2020, an employee was brushing snow from her vehicle in a parking lot when she slipped and fell, breaking her left ankle.",1
"On Feb 9, 2020, at approximately 7:15 PM, an employee was moving between two large fixtures in the storage room to get through to another aisle. The employee struggled to get through and fell onto the concrete floor. The employee was hospitalized with a broken right hip.",1
"An employee was walking away from the blancher after turning it off. The blancher then shot out hot water which burned the employee's back, neck, and shoulder.",1
"An employee was unloading lumber from a railcar. Railcars have ladders welded to each side for employees to enter/exit. The employee was climbing down one of the railcar ladders and slipped and fell between 6 and 8 feet to the ground. The employee suffered a fractured back, dislocated shoulder, and laceration to the top of the head.",1
An employee's right thumb tip was pinched in a hoist hook resulting in amputation of the thumb tip without loss of bone.,0
An employee was bitten by a venomous spider while landscaping and had a severe reaction to the venom that required hospitalization.,1
"An employee was feeding a hopper when her right middle finger was caught in the auger, resulting in a middle finger amputation.",0
An employee was walking around a school bus conducting a pre-trip inspection. The employee slipped and fell on ice that was covered by fresh snow and sustained a broken ankle requiring hospitalization.,1
"An employee lost her balance and fell to the floor, injuring her hip and back. She was hospitalized and required hip surgery.",1
An employee was adjusting a sensor inside of a de-stacker machine. The machine was then activated and the injured employee was struck by the suction cup carriage as it came down resulting in fractured ribs and a fractured shoulder that required hospitalization. The machine was not locked out at the time.,1
An employee was getting her lunch bag from the lunch room. Her right hand was on the hinge side of the door when the door closed and amputated her middle fingertip.,0
An employee slipped on ice in a parking lot and fell. The employee was hospitalized with injuries to the tailbone and lower back.,1
"An employee was closing up the personal water craft (PWC) rentals. While operating one of the PWC's, he took a sharp turn and hit a wave. The employee then contacted the dash and handles. He sustained a hernia which required surgery.",1
"On February 10, 2020, an employee was gathering runners from a conveyor belt when the employee's finger was caught between the guard and the belt, pulling the employee's left hand into the belt. The employee was hospitalized with a broken left wrist.",1
"An employee was hand stacking cases when he tripped and fell forward, hitting his head on a lab station desk. He was hospitalized with a forehead contusion.",1
An employee walking in the work area slipped on a puddle of water and fell sustaining head and arm injuries.,1
An employee was walking from her vehicle to the workplace when she slipped and fell on ice that was covered by fresh snow. She sustained a broken left leg that required hospitalization.,1
An employee slipped and fell on the kitchen floor and sustained a fractured right hip. The employee was hospitalized.,1
"An employee was walking to her car when she slipped on ice and fell to the ground, breaking her lower right leg.",1
"An employee was manually rotating a belt pulley during oil servicing. The employee's left hand was pulled into the pulley system, resulting in amputation of the middle and ring fingertips.",0
"At about 8:30 AM, an employee was opening a scrubber pot. Flammable gasses escaped from the pot and ignited. The employee sustained burns to the hands and face and was hospitalized.",1
"An employee was ascending a portable ladder attached to a telephone pole in order to replace a coaxial cable known as a ""cable drop."" The ladder was resting against the telephone pole and was connected to the base with a ladder strap. While climbing, the employee fell approximately 16 feet from the ladder to the ground and sustained multiple fractures to the lower limbs.",1
An employee suffered burns to the neck and back from hot water and steam while cleaning a processing kettle.,1
"An employee was working on an extruder when he went into the winder to re-thread the sheet. He asked his helper to position the turret forward to gain access to the sheet roll. When the helper rotated the turret, the employee was caught between the idle roller and the pull roll guard. The injured employee sustained fractured ribs.",1
"An employee was on the loading dock while another employee was using a forklift to load a trailer. As the employee turned to get a pallet jack, the employee's foot became pinched between the rear of the forklift and the dock plate. The employee was hospitalized with a broken ankle and tendon damage.",1
"An employee was polishing a roll on a grinding lathe and contacted the headstock of the lathe, resulting in lacerations and a fractured left shoulder.",1
An employee was attempting to load a rough terrain forklift onto a flatbed trailer. The forklift slipped off the trailer onto its side and the employee suffered a fractured pelvis and three fractured ribs.,1
"An employee was on a 5-foot ladder repairing a hydraulic valve and changing the internal packing. He used pressurized air to push the piston up. He then bled the fluid out of the valve. Once he removed the last bolt, pressure released, and the valve housing struck the employee in the rib area knocking him off the ladder. The employee sustained bruised ribs and back pain.",1
"Employees were working on a press machine that had a mold that was leaking rubber. The employees proceeded towards the control panel to manually lower the mold. The injured employee entered the machine between the front knock-out slides, with a flashlight and approached the mold. Upon starting the inspection of the donut, the employee heard a suction sound. The employee was startled as the top plate came down and he quickly turned his head down and away from the front side of the machine. The employee struck his forehead on the left side rails and then fell backwards and struck the backside of his head on the opposite rail. The employee received staples to the back of the head and stitches to an eye and was hospitalized for a concussion.",1
"An employee was working as a net mender, tasked with positioning the nets for fishing operations. While the employee was wrapping a rope around the cathead to position the net, his left hand was caught in the cathead and he was wrapped around the cathead several times. The employee was hospitalized with a lacerated left forearm.",1
"An employee was on a ladder prepping a house to install insulation when the ladder slipped out from under him. He fell 12 to 15 feet to the ground, landing on his lower back and breaking his tailbone.",1
An employee was trying to remove a cat from a warehouse. The cat bit the employee's knuckle.,1
An employee was walking down an aisle way and tripped over a box of flowers. The employee fell on the floor and sustained a fractured right shoulder.,1
"An employee was working from a floating platform to remove a concrete form when a wave in the water caused the platform to rise up above the protective bumpers. His left little finger was then caught between the formwork bolt and the platform, causing a partial amputation of the left little finger.",0
An employee was descending from the third floor deck in an aerial lift and made contact with a 69-Kv power line. The employee sustained flash burns to the face.,1
"A delivery truck with a flatbed semi-trailer was parked in the yard. The back end of the trailer has a hydraulic dovetail to facilitate drive-on/drive off loading and unloading. It was in the down position. The injured employee drove a scissor lift and parked it over the tail end lip of the lowered dovetail. With the unit placed against the dovetail, the injured employee initiated testing of the pothole protection system and began lifting the basket. The delivery truck driver, unaware of the scissor lift's presence, used a remote to lift the dovetail to its travel position so he could depart. The dovetail lifted the scissor lift and caused it to tip over with the injured employee in it. The employee fell 10-12 feet to the ground and sustained a fractured pelvis.",1
While setting up a dining table an employee fell to the ground and injured their hip.,1
"An employee was setting a garbage tote back on the ground after emptying it into the back of a garbage truck when the arm of the garbage truck sprung open and struck his right leg, fracturing it.",1
"An employee was leaving a breakroom. While she was holding the door open for another employee, the door slammed on her right little finger. The employee sustained a partial amputation to the finger.",0
An employee was patching drywall from a stepladder and fell to the floor. The employee was hospitalized for a broken ankle.,1
An employee was water jetting a clogged section of pipe when the employee lost their grip and the water jet line forced itself back out of the pipe due to the pressure. The water jet pierced the employee's left glove and punctured the left hand as it came out of the pipe.,1
An aerial crew was lashing a span of fiber telecommunications line when the fiber rose under tension and contacted the overhead primary electrical line. An employee working out of the bucket sustained burns to both hands and was hospitalized.,1
An employee was using a router to duplicate chair parts in plywood. She was feeding the corner of the material into the spinning bit when the bit grabbed the material and spun it out of her control. She suffered a deep laceration to the left index finger.,0
An employee was attempting to de-escalate an agitated student when the student head-butted the employee. The employee sustained a concussion.,1
"On February 11, 2020, an employee was using a handheld circular saw to cut a plastic barrel when the saw slipped and struck the employee's left leg above the knee, causing a laceration that required hospitalization.",1
"An employee was on a ladder preparing a wall for an electric conduit when he became unbalanced and fell 8 to 10 feet to the concrete floor, suffering a head laceration and a broken arm. He was hospitalized.",1
"An employee was in the back of his trailer offloading a 1500 lb. crate for a customer. There were two straps on the crate holding it to the wall. He released a strap so the customer could unload the crate completely. When he released the strap, the crate tipped over onto him. He sustained a broken shoulder, broken ribs, and an ear contusion.",1
"An employee fell to the ground while picking up a cracker box, suffering a fractured pelvis.",1
"An employee was picking up parts from a plastic bin on the floor. When the employee turned around, she caught the edge of the pan with her foot, causing her to fall onto the cement floor.  She landed on her left side and sustained injuries to the left tibial plateau, right ankle medial/lateral malleolus, and right metatarsal.",1
An employee slipped onto a cement mixer while it was being cleaned. His right forearm was caught in the mixer and he sustained lacerations to the right arm.,1
"On February 11, 2020, an employee was carrying roof decking material into the active area of the roof deck replacement. The employee stumbled and fell through an open hole in the roof deck and landed on the concrete floor. The employee was hospitalized with injuries to the spinal cord and wrist.",1
An employee had just finished painting a metal carriage for battery handling. The employee was pulling the carriage out of a paint booth to put it in a blast oven when it slipped out of the employee's hand and the momentum from pulling it caused the employee to fall to the ground. The employee broke the left hip and was hospitalized.,1
An employee was helping a forklift operator when the forklift's wheel ran over his left foot. He suffered detached ligaments and was hospitalized.,1
An employee was loading a truck with pieces of granite. A piece of granite rolled onto the employee's hand and amputated the end joint of his finger.,0
An employee was using a clamp when the clamp closed on his finger resulting in a partial amputation of the left index fingertip.,0
"An employee was trying to attach a ground power unit (GPU) to the rear hitch of a tug. As the employee was pulling the tongue of the GPU, his left hand was caught between it and the hitch of the tug. The employee suffered an amputation of a fingertip to the first knuckle.",1
An employee was attempting to unjam a stick recovery machine when he was caught between the metal kicker and the metal frame. He was hospitalized with internal injuries in the abdominal area and kidney damage.,1
An employee was performing maintenance on a golf cart that was on a jack lift when the cart moved while the employee was working underneath it and fell on the employee. The employee suffered four broken ribs and an air pocket in the lung. The cart was not in park at the time of the incident.,1
An employee was walking down concrete steps toward his vehicle when he fell onto his right knee on the concrete. He was hospitalized and required surgery.,1
"An employee was painting a tank car when his left hand came in contact with the spray from the paint sprayer, puncturing his left index finger. He was hospitalized and required surgery.",1
"An employee was using a two-handed drill to make holes in the wall studs for piping, and was standing on a ladder. When the drill bit came through the wall stud, it caught the employee's sleeve and lacerated his left forearm.",1
"Employees were moving 10x10-foot panels to screw onto a structure. The crane that was being used made the structure move, hitting an employee who was on a ladder. The employee fell off the ladder and sustained a fractured pelvis.",1
"While delivering building products to a residential jobsite, an employee slipped and fell from a rooftop to the ground below. The employee sustained fractured vertebra and ribs and was hospitalized.",1
"An employee fell to the floor while walking out of a refrigeration room, breaking her right hip and requiring hospitalization.",1
"An employee entered a silo (tank) to clean the remainder of the grain from it and handle the sweeper machine. While the other sweepers were operating, he stepped back and his foot went inside the sweeper. The sweeper machine caught his boot first and then his foot, causing an open wound and broken bone.",1
"An employee was removing material from a roof and loading it into a wheel barrel when he lost his balance and fell through an intact skylight to the concrete floor below. He suffered a broken collarbone, three fractured ribs, and a crushed vertebra, and he required staples in his head.",1
An employee was driving a golf cart when it was struck by a guest's car. The employee suffered a broken ankle.,1
"While descending a ladder from a roof, an employee fell 8 feet from the second story, rolled down the roof and fell to the ground. The employee sustained a broken wrist and a concussion.",1
"An employee was working as an event specialist, tasked with performing product demonstrations. While she was in the backroom looking for a water sprayer, she tripped and fell, injuring her hip. She was hospitalized and had surgery.",1
"Employees were moving a large electrical cabinet when it tipped over, striking an employee. The injured employee sustained a fracture and ligament damage requiring hospitalization and surgery.",1
"An employee was walking on metal mesh to retrieve a tool. The mesh panel gave way and the employee fell 27 feet to the floor, suffering broken hips and legs.",1
"An employee was helping building maintenance install a new dock plate. While the employee was installing the dock plate by hand, the dock plate shifted and caught the employee's gloved hand, pinching it between the new dock plate and the concrete dock. As a result, the employee's right thumb tip was amputated.",0
"On February 11, 2020, an employee was using a hose to spray off equipment. The employee attempted to move a conveyor belt, but its casters were locked; the employee's left hand slipped into the running conveyor belt, which amputated the middle fingertip.",0
"An employee was troubleshooting a machine's conveyor when his fingers were caught in a nip-point between the belt and roller, amputating the fingertips of the left index and middle fingers.",0
An employee was cutting baseboards with a circular saw. The saw amputated the employee's left ring finger and cut the employee's left little finger.,1
"While disconnecting a quick-connect hose fitting, an employee's finger was pinched between the quick-connect fitting and a steel pallet resulting in a fingertip amputation.",0
An employee working at the salad bar was filling a food processor when her fingers contacted the blade. The employee sustained amputations to two fingertips before the nails.,1
"An employee was walking up to the front door of a residence to deliver a parcel when he missed the first step leading up to the door, causing him to lose his balance and fall onto his left side on the concrete pavement ground. He was hospitalized with a fractured left hip.",1
An employee was operating a crane with a clamshell bucket attachment. The anti-two-block device came free from the main line and fell into the operator's cab after bouncing down the boom. The employee suffered a broken right arm and a major contusion of the right thigh. He was hospitalized.,1
"Employees at an oil rig were breaking down its blowout preventers. After removing the preventers from the wellhead, they put a wooden board on the ground to set the preventer on and keep it from getting muddy. When one employee unhooked his tagline from a preventer, the preventer shifted and the locking stem on its top struck the top of the employee's left boot. He suffered a laceration to the foot and two broken toes.",1
An employee was cleaning around an edger saw using an air wand. The employee was removing a piece of wood lodged in the edger when its rollers caught his coat sleeve and broke his right hand in three places.,1
"An employee was standing behind a winch truck. The truck rolled back and ran over the employee's left leg. The employee suffered a thigh injury, a head laceration, and bruising to the right-side ribs.",1
"A maintenance employee was performing repairs on a CNC machine.  The automatic tool changer (ATC) door next to the tool arm was misaligned, and the employee was removing it. The employee manually turned the tool arm which caused the door to actuate and shut suddenly pinching the employee's left hand and causing a partial amputation of the distal phalanx of the middle finger.",0
"An employee was helping in loading operations involving a chain sling and crane. Sheets of steel shifted in the load, and a finger on the employee's left hand was caught and crushed between the sling and the material. The finger was amputated.",1
"An employee was repairing a food processor when a blade in it cut his finger. He was hospitalized, requiring surgery.",1
"After a concrete bucket was filled from a chute, the chute was raised up and crushed the left little finger of the employee who had been filling the bucket. The employee suffered an amputation to the finger.",0
"An employee was standing on an upper deck unclogging a cyclone. A steam release caused an explosion panel in the hopper to blow out toward the employee, who suffered a third-degree steam burn to the face.",1
An employee was setting filters in molds in a molding machine. The employee's leg was pinched and broken between the foundry mold carriage and a roller bracket.,1
"An employee was operating an electric pallet jack. The employee's foot was pinned between the pallet jack's platform and a stack of pallets, sustaining a contusion.",1
"On February 12, 2020, at approximately 7:10 AM, an employee was preparing to load liquid feed into a truck. As the employee applied additional force to release a transfer hose cap that was stuck, the hose cap popped up and struck him on the right side of his face. The employee sustained a fractured orbital bone and fractured nasal bones as well as a laceration to the nose and an abrasion to the right side of the face. The employee was hospitalized and required surgery.",1
"On February 12, 2020, an employee was checking the water level at a riverbank. The employee slipped on a rock and fell 4 feet to the water's edge, suffering a broken left leg.",1
"A forklift was lifting a block cart so an employee could hit the caster wheel with a ""dead sledge"" in an attempt to straighten the wheel. Due to the striking of the caster wheel, the block cart shifted and slipped on the forks, which caused the base plate to slide off the block cart. The employee lost his balance and fell to the ground. The base plate slid and struck the employee's left leg causing a broken left femur.",1
"An employee was welding an impeller section when the impeller shifted and he tried to grab it. The impeller spun and struck his left leg, causing a fracture to the left tibial plateau that required surgery and hospitalization.",1
"An employee was walking to her truck to retrieve a set of gloves while preparing for feedlot bedding operations. A front loader emptied a load onto the bedding wagon. The loader then backed up and the employee was knocked to the ground by the loader's bucket, and then run over. The employee sustained fractures to five lower vertebrae.",1
"An employee was walking into the bag room in a golf cart barn when he tripped over a golf bag on the barn floor. He fell onto his hands and knees, and a nearby chair struck this throat and chest; he suffered broken vertebrae, three cracked ribs, and a torn esophagus.",1
"An employee was installing insulation. As she was drilling a hole into the metal insulation, her cut resistant gloves got caught in the drill bit and her left index finger was smashed between the drill bit and the metal insulation. Her left index fingertip was amputated.",0
"At 8:15 a.m. on February 12, 2020, a Roll-Rite employee was installing a tarp system for a trailer when his left little finger was caught between a cable and a pulley. The fingertip was pinched off. The employee was hospitalized.",1
"An employee slipped on wet, sloping ground near the base of a tree. He fell and was knocked unconscious, also suffering a bruised shoulder.",1
An employee was using a forklift to empty a dump bin when their left index finger was caught and smashed in a pinch point between the forks and the dump bin resulting in a partial amputation.,0
"An employee was replacing a new liquid propane tank for a forklift. The propane leaked through a valve from the tank and onto the employee's right index and middle fingers, burning them.",1
"An employee had just finished working on a fan motor. When the fan was turned on to verify the direction of its rotation, the vacuum of the fan pulled the tip of the employee's right index finger into the spinning blade, causing it to be severely lacerated from the middle of the nail to the end of the finger.",1
A temporary employee was running a printing machine when it became jammed. The employee's left hand then became caught in the printing machine and two fingers were crushed. A portion of the left middle finger needed to be medically amputated.,0
An employee was changing a tank on a forklift. The valve was faulty and sprayed the employee with propane. The employee sustained frozen/burned skin and required a skin graft.,1
"An employee was inspecting the roof of a building for possible repairs to be made, when he slipped and fell approximately 19 feet from the roof to the ground below. He sustained a dislocated shoulder and left hip, and a fractured left ankle.",1
"The injured employee was training another employee on a molding machine and observed that the mold needed adjustment. While the injured employee was reaching into the machine, the trainee unknowingly pushed the start button, cycling the machine. The injured employee sustained crushing injuries to the right thumb resulting in amputation.",1
"Two employees were descending in an aerial lift after doing bridge work. The boom and basket became stuck against the bridge girder. When the boom came loose, the wheels of the boom lift came off the ground and threw the employees out of the basket. Both suffered broken legs, and one was hospitalized.",1
An employee fell approximately 20 feet from a scaffold while installing a window. The employee’s leg was broken and he was hospitalized.,1
"An employee was installing a new tank hatch lid. The lid struck the employee's left hand, amputating the tip of the thumb (with no bone loss).",1
An employee was walking up the back steps to a warehouse. He fell forward and his face struck a guardrail at the top of the stair platform. He suffered a facial laceration and possible fracture.,1
An employee was securing equipment on a pickup truck with a bungee cord. The bungee cord snapped loose and struck the employee on the left eye causing an injury that required hospitalization.,1
An employee was operating a machine press. The press activated and his right middle finger was caught under it. The fingertip was amputated.,0
"An employee was outside, about to perform a yard check of tractor/trailers. Another employee's car backed into the employee, injuring the employee's left hip and leg.",1
"An employee was working in a freezer unit, slipped and fell, suffering a bruised back and ribs and a blood clot. He was hospitalized.",1
"An electrician was relocating a live, 480-volt wire in an electrical panel. Carpenters from another company were drilling a hole on the floor with a track underneath the panel. An arc flash occurred in the electrical panel and hit the electrician and two carpenters. The electrician sustained burns to his face and stomach. One carpenter sustained burns to his back. The other carpenter had buzzing in his ear due to the loud sound.",1
An employee was loading a jackhammer attachment onto a trailer. The equipment slid from its wooden pallet onto his left middle finger. The finger was partially amputated.,0
"An employee's finger was caught in a door, and the fingertip was amputated.",0
"An employee was using a shear to cut through a piece of iron. When the shear cut through, the piece of metal flew back and struck the employee in the back. He sustained a concussion, skull fracture, and a fractured rib.",1
An employee fell off a trailer while unloading freight from it. The employee landed on a forklift and was injured. The employee was hospitalized.,1
"An employee was servicing an airlock machine when it amputated his left index, middle, and ring fingertips.",0
"An employee fell through an opening in a catwalk, landing on the ground 60 feet below and suffering multiple fractures and head trauma.",1
"An employee slipped on uneven ground in a parking lot and fell. He hit the ground and suffered injuries to the left elbow, left hand, left hip, and lower back.",1
"An employee was oiling the chain on a machine. As he was wiping off excess oil, the chain caught his hand and amputated his right middle fingertip, removing two-thirds of the nail.",0
"An employee was descending a rolling staircase. The employee fell from the staircase to the floor below, suffering a broken right knee. The employee was hospitalized for treatment and surgery.",1
Two employees had a domestic incident at work. The injured employee was struck in the head by the other employee and was rendered unconscious.,1
An employee was changing a roll of seal film on a sealer. The film slicing clamp came down on her right ring finger. The tip was medically amputated.,0
"An employee was watching hotdogs on a packing machine to be sure they were straight. The employee was straightening them out when a block came down and struck the employee's right little finger, causing three fractures. The machine was unguarded at the time.",1
"An employee slipped on ice in a parking lot and fell to the pavement, suffering a broken right hip.",1
"An employee was operating a riding pallet jack, staging a load of pallets. As he was backing the pallets into the staging area, the top pallet came in contact with a concrete pillar. It shifted forward and struck the employee's right hand as it rested on the throttle control of the pallet jack. The employee suffered a compound fracture and laceration to the little finger, resulting in a medical amputation to the finger.",0
"An employee was cutting marine board at the glass cutting area on a table saw. The blade caught the board; then the saw kicked back, resulting in the amputation of his left middle fingertip.",0
"An employee was bent over, picking up stacks of boxes from the floor to put into a carriage. He picked up multiple boxes and turned and felt a pop in his back. He was hospitalized with a back strain.",1
"While leaving a customer's docking area, an employee slipped on the snowy floor and fell to the ground. The employee was hospitalized for bleeding in the brain.",1
An employee fell off a truck ramp while raising it. The employee landed on concrete and suffered laceration requiring stitches.,1
"An employee was clearing snow from the load on a curtain trailer. He slipped off the load and landed on the floor below, suffering a broken pelvis and a dislocated hip.",1
"At about 8:30 a.m. on February 13, 2020, two employees were doing carpentry work at an office building. A section of HVAC duct broke free from ceiling mounts and struck one employee's head, injuring it.",1
"An employee was helping lean windows back to get another window. The windows fell on him, breaking a vertebra in his lower back and causing a laceration above the left eye.",1
"An employee slipped on snow-coated steps outside of the facility and fell to the ground, breaking her leg and requiring hospitalization.",1
"An employee tripped on a curb in a parking lot and fell to the asphalt, suffering a dislocation and fracture of two toes on the left foot.",1
"An employee was on a scaffold, using a gas-powered saw to cut out a lintel. The saw caught on something and kicked back, striking the employee in the right cheek. The employee suffered lacerations from the cheek to the top of the nose.",1
An employee had been checking airlines on railcars. The pickup truck that the employee had been driving rolled backwards and pinned him between the driver's side door and a rail car. He sustained bruised ribs.,1
"An employee tripped on a cone that was covering a hazard on a cafeteria floor. He lost his balance, fell to the floor, got up, slipped, and fell again, breaking his left hip. He was hospitalized.",1
An employee was trying to unjam a resin clog in a spin dryer. The rotating blades inside the exit port amputated his left ring fingertip.,1
"An employee was shutting end gates in the back of a semi trailer. The trailer pulled away and the employee fell out, suffering a broken right leg.",1
"An employee fell while trying to jump onto a runaway forklift, landing on the concrete floor and suffering contusions and bumps.",1
"While holding a sheet metal part and bending it in a press brake, an employee's right ring fingertip was caught between the sheet metal part and the work rest. The right middle fingertip was amputated.",0
"An employee was operating a forklift with a mule attachment. The metal frame of the mule came off the metal bracket on the forklift. As the employee attempted to adjust it, his pinky finger was pinched between the metal bracket on the forklift and the metal mule frame. The top one-third of the employee's pinky finger was amputated.",0
"An employee was welding on a 55-gallon drum when it exploded, injuring the employee.",1
"An employee was putting up products in the beauty department and slipped, landing on the countertop. The employee sustained a fractured right hip.",1
"On February 13, 2020, an employee was slicing cucumbers with a meat slicer. The machine amputated the tip of his right thumb.",0
An employee was operating a food processor when its blade amputated the tip of his left middle finger.,1
An employee was on a scaffold applying insulation. The scaffold and the employee fell. The employee's right foot landed on the protruding shower drain pipe and was fractured.,1
"An employee was tightening a gas line fitting. The employee's wrench slipped off the fitting, and the employee fell backwards onto a tree stump, suffering a broken right rib and a punctured lung.",1
An employee sustained a dog bite to their left forearm and was hospitalized for surgery.,1
"An employee fell from a scissor lift, landing about 10 feet below and suffering two broken ribs, a sprained ankle, and a sprained wrist. The employee was hospitalized.",1
An employee was switching out the battery on an electric pallet jack using an electric overhead hoist. The employee's finger was caught between the hoist hook and the pallet jack battery resulting in amputation.,0
"An employee was cleaning a spiral inlet belt on a line. A sprocket on the belt caught his left hand, and his left arm was broken.",1
"An employee was installing a toilet. The toilet fell and broke, and its sharp edge lacerated the employee's left arm to the bone.",1
"An employee was on a roof when he tripped on a skylight and fell backwards to the roof surface, breaking his ankle.",1
An employee was working inside of the air handling unit and was working on the fan blade belt and pulley system. The employee rotated the fan blade pulley belt and amputated a finger between the fan blade and belt system. The air handling unit was not locked out/tagged out at the time of the incident.,0
"Three employees were moving steel plates using an overhead crane. One employee's left little finger was caught between the ring of the lifting clamp and the hook of the crane chain, causing an amputation of the fingertip.",0
"An employee slipped and fell on ice while walking toward a self-storage unit, suffering a broken femur.",1
"A personal care assistant was walking up to a house when she slipped on ice and fell to the ground, suffering a broken right femur. She was hospitalized.",1
"An employee was walking to their car in the parking lot, slipped and fell on ice and fractured ribs.",1
"An employee was connecting two dollies. He had pulled the pin from the eyelet of one dolly and was pulling the other dolly to make a connection when his right middle finger was caught between the tongue of one dolly and the eyelet of the other dolly. The finger was lacerated between the nail and the first knuckle, and the fingertip was medically amputated.",0
An employee was using a skid-steer to clean up debris and dump it into an over-the-road dump truck. The dump truck's bed was partially raised. The employee exited the skid-steer and stood behind the truck. Hot asphalt flowed from the truck bed onto the employee resulting in second and third degree burns to the hands and face.  The employee was hospitalized.,1
An employee was loosening a loading spout and fell approximately 12 feet. The employee sustained a fractured right elbow and left tibia and a torn left ACL. Fall protection was not worn at the time of the incident.,1
"An employee was in the stock room hallway when a construction worker asked the employee to move a piece of sheet rock by hand. The sheet rock fell and struck the injured employee's leg, breaking it.",1
The injured employee slipped and fell on the slick roadway during a heavy snow storm. The employee was hospitalized for a fractured right femur.,1
"An employee was walking on the deli department sales floor, tripped and fell on her right shoulder. The shoulder was fractured.",1
Two employees were moving a 3-inch shaft. The shaft slipped and trapped one employee's left index finger against the rollers of the trough below. The employee's fingertip was amputated.,0
An employee's hand was caught in the rollers of an outdoor electric gate.,1
"After moving a box from one pallet to another, an employee turned to walk away; her foot caught in wrapping on a pallet and she fell, suffering a broken hip.",1
An employee was preparing for breakfast in a kitchen restaurant. The employee was shot twice in the head and once in the shoulder.,1
"An employee slipped on an icy patch on a rubber membrane roof, fell to the roof surface, and suffered two broken back vertebrae.",1
"A maintenance employee was troubleshooting a tool-changer on a horizontal mill. The tool changer cycled while the employee was inside the machine, striking the employee in the chest. The employee suffered a fractured sternum, two fractured ribs, and small fractures to two bones on the spine. The employee was hospitalized.",1
Explosive powder material was being poured into a plastic container. An explosion occurred and five employees were transported to the hospital. One employee sustained burns to the face and left hand.,1
"On February 14, 2020, an employee was turning on the glue and the air in a carpet winder machine. The machine was turned on and the employee's left arm was broken. The employee was hospitalized, requiring surgery.",1
"An employee was adjusting the tooling on a brake press. The upper die descended onto the employee's right arm and left hand, severely injuring both.",1
"After repairing a power press machine, an employee began to operate it. The clutch pin was not positioned properly and eventually slipped off, causing the press to come down twice in rapid succession and amputate the employee's left thumb and index finger.",0
An employee had tarped the load on his truck. He was on top of the load to fix a twisted strap when he fell off the back of the truck and injured his neck.,1
"An employee was inspecting the inside of a dryer. An object moved inside the dryer, crushing the employee's skull against the side of the dryer. The employee suffered multiple skull fractures.",1
An employee was using a shear press to cut metal and cardboard. The press activated while the employee's fingers were in the point of operation and amputated the top of the employee's left middle finger.,0
"At about 12:00 p.m. on February 14, 2020, an employee was taking product through a warehouse using a stand-up clamp truck. He fell off the lift, struck his head on the concrete ground, and lost consciousness, beginning to shake. He was hospitalized, in a coma and suffering from a skull laceration.",1
"An employee was conducting a walk-around, inspecting a house to see where to install a satellite dish, when a neighbor from 120 yards away saw him, thought he was trying to break in, and started shooting at him. He was shot in the left bicep, requiring hospitalization and surgery.",1
An employee was assisting in cutting downed logs into small sections. An end section of log came loose from the tractor and struck the employee in the right leg fracturing the femur.,1
An employee suffered a punctured lung while carrying a sauce bucket. The employee dropped the bucket and the bucket bounced off a door and struck the employee.,1
An employee conducting re-roofing work was hospitalized for back and leg injuries after falling 28 feet from a flat roof into a metal dumpster below.,1
"An employee was making a propane delivery at a residential customer location. As he walked to the customer's door, he slipped on ice and fell resulting in a right leg and ankle fracture.",1
"An employee was walking, tripped over an elevated floor plank, and fell. The employee was hospitalized for a hip fracture.",1
"A ski instructor was carving a turn during a morning training session. The instructor's skis caught on the snow and the instructor fell to the ground, suffering a spiral fracture of the left tibia and fibula.",1
An employee was laying pipe when two of his fingers were pinched between two trench boxes. He suffered an amputation.,1
An employee was directing a crane operator with hand signals to pick up a piece of scrap steel off the floor when his hand was caught between the sheet of scrap metal and the lifting device (grab). The employee sustained a finger amputation and a laceration.,0
"An employee was bringing a patient something to drink when she tripped on a toy and fell, striking her head and fracturing a vertebra.",1
An employee was holding the stand in order to set a die onto to it. The die was placed on the employee's pinky finger resulting in a fingertip amputation.,0
An employee was struck by crane as the company was performing a rig move. The employee suffered a fractured left heel.,1
"An employee fell approximately 20 feet through an unsecured grate that was being refurbished. The employee was hospitalized for a broken left leg and five broken ribs, a concussion and lung contusions.",1
An employee's foot got caught on the computer cord when she stood up from her workstation. The employee fell and was hospitalized for a right ankle injury.,1
Two employees were installing a metal panel. The panel slipped out of the hands of the employee holding it and it struck and fractured the other employee's lower right leg.,1
"An employee was using a tube squaring machine to cut tubes. The employee had turned off the machine in order to tighten the clamping shell. The machine had not come to a full stop as the employee moved his right hand into position to turn the tensioning screw. While turning the tensioning screw, the employee’s right hand slipped and his right ring finger contacted the square tube blade resulting in a fingertip amputation without bone loss.",0
"An employee was backing up a dock stocker when it collided with a storage rack. The employee's foot was caught and crushed between the dock stocker and the rack. The employee was hospitalized, requiring surgery to the foot.",1
"An employee was placing snaps and positioning webbing material into the snapping machine. The machine was activated via the foot pedal while the employee's index finger was in the point of operation. As a result, he suffered a fracture to his finger.",1
An employee was operating a ham skinner. His right ring fingertip was caught and lacerated in the skinner.,1
An employee was peeling carrots when a carrot got stuck in the peeler machine. She was trying to dislodge the carrot when the machine amputated the tip of her left middle finger.,0
"An employee slipped and fell, suffering a broken hip and requiring hospitalization.",1
"An employee was operating a walk-behind gasoline-powered tamper, trying to repair a low section of asphalt. While the employee was tampering the temporary asphalt, the fuel line connection broke from the fuel tank at the rubber grommet, discharging gasoline on his pants, which then ignited. He suffered second degree burns to both legs.",1
An employee slipped on ice in the parking lot of the facility and fell resulting in a bruised lung and fractured ribs.,1
An employee was driving a tractor up a trailer ramp when the tractor started going backwards and rolled over. The employee was struck by the tractor and suffered a pelvic fracture.,1
"As a crane truck was rigging down, an employee's hand was caught between the outrigger and the crane. Three fingers on the employee's right hand were crushed and the employee was hospitalized.",1
"An employee was exiting an RV using an affixed three-step assembly when he lost balance while stepping down from the last step, which was approximately 4 inches from the ground. The momentum of his body when his foot contacted the ground resulted in a left ankle fracture.",1
"An employee was removing trash from a rail car. As the employee exited the railcar and stepped onto the dock plate to re-enter the dock, the employee mis-stepped and fell to the ground. The employee sustained a fractured clavicle and fractured ribs.",1
"An employee slipped on ice while on a path into work and fell to the ground, suffering a broken left fibula.",1
An employee was cleaning a pit when a shackle fell from overhead and struck the employee. The employee sustained a back fracture.,1
"While an employee was putting cheese into a cutter machine, his left arm got caught and crushed in the machine.",1
"An employee slipped and fell while walking on a sidewalk, striking his head on the ground. He was hospitalized with a head injury.",1
An employee was performing maintenance work and replacing strips on a conveyor. The employee tripped and fell onto the conveyor hitting their arm. The employee was hospitalized for a fractured arm.,1
"An employee slipped and fell on ice in the parking lot, fracturing the right ankle and requiring hospitalization.",1
"An employee was removing a tire from a car. The tire became unbalanced and struck the employee's hand, pinning it against a tire and causing lacerations and a fracture.",1
"An employee was standing on the tail end of a trailer, taking boxes off a scissor lift that was against the trailer. The scissor lift moved and the employee fell about 5 feet to the ground between the end of the trailer and the lift. The employee suffered a head contusion, a lacerated right leg, and a broken right arm.",1
"An employee was making a delivery, slipped on snow covered ice, and broke an ankle.",1
"An employee was lowering a boom from a crane onto the ground for disassembly. Two load blocks were placed next to each other and one of the blocks knocked into the adjacent block, causing it to fall over onto the employee's left foot. The employee's foot was crushed.",1
"An employee was talking to a skid-steer operator. The skid-steer turned to move, and the tracks ran over the employee's feet resulting in fractures and other injuries to his feet.",1
"An employee was lifting a manhole cover when it slipped and pinched his left middle finger, causing an avulsion.",1
"An employee was troubleshooting a corner post part stacker to determine if there were any faulty sensors. The machine cycled and pushed a slide mechanism into the employee's hand, amputating the tip of the ring finger at the first joint.",0
An employee was operating a forklift and got their foot caught between the forklift and a guard pole.,1
An employee was examining a cat when the cat lunged at her and bit her right middle finger. She was hospitalized as a result of the animal bite.,1
"An employee was operating a chain breaker when the chain breaker slipped and struck his face, causing impact injuries, a laceration, and a fracture.",1
"An employee twisted his back, suffering a herniated disk, while stepping down from his work trailer. He was hospitalized.",1
A trainer was entering a stall and was kicked in the chest by a horse. The employee suffered a lacerated liver.,1
An employee was cleaning a truck when he fell from its running board. He suffered cuts to his right shin.,1
"On February 17, 2020, an employee was replacing a shingle roof on a three-story apartment building when his left foot slipped out from under him and he fell off the roof onto the ground. He was hospitalized for a fractured neck.",1
"An employee was being lifted in a man basket and tried to hook up a cable to a construction truck bucket. He asked the forklift operator to raise him higher and his finger was pinched between the man basket and a bolt, causing a deep tissue injury that required surgery.",1
An employee was operating a drill press when it grabbed his left glove. He suffered an amputation to the left little finger and a broken ring finger.,0
"While attempting to restrain a combative patient, an employee passed out due to physical exertion.",1
"An employee was taking garbage out to a trash bin on the sidewalk. The employee tripped on a water display case and fell, suffering a closed fracture of the left hip that required surgery.",1
"An employee was stocking product was using a three-step ladder. As he was descending, he missed the last step and fell. The employee sustained a fracture to his left femur and hip.",1
An employee was putting papers away in a cubicle cabinet when she fell on the floor and broke her hip.,1
"An employee tripped over a cord while maneuvering around a resident's bed, striking the ground and requiring hospitalization for a broken pelvis.",1
"An employee was operating a leather machine to trim excess leather off a shoe when the machine became jammed. While the employee was trying to remove the leather, the machine gears struck the employee's hand, resulting in an amputation of the right index finger.",1
An employee was trying to cut a tangled thread from a twisting machine. The machine caused the amputation of the employee's left ring fingertip.,0
"An employee was asked by a table saw's control panel operator to push back stacked material to be cut through the hold-down bar area. The injured employee hit the E-stop button to push back the material as requested. While his hand was still on the material, the control panel operator hit the cut buttons, causing the hold-down bar to come down on the injured employee's right hand. The employee pulled his right hand out from under the hold-down bar, resulting in an amputation of the right index finger up to the knuckle with bone loss.",0
"A welder was restocking a steel plate when it slipped from his hands and landed on his foot, breaking it. He was hospitalized and underwent surgery.",1
"On February 18, 2020, an employee was using a biscuit joiner cutter for cabinet frames. The cutter lacerated his left index finger and thumb.",1
"An employee was operating an edger saw when the employee's arm was pulled into the shaft of the lumber deck, causing a compound fracture to the upper arm and a fracture to the lower arm.",1
"An employee was using a pipe on the end of an air pressure gun. When the air was activated, the pipe became airborne and hit the employee in the face.",1
An employee slipped on ice while getting out of her car in a parking lot. She suffered a broken arm and was hospitalized.,1
"An employee was installing metal decking when he went through a hole and fell 12 feet to the next lower level, suffering broken wrists.",1
A team of employees was carrying a 10-foot section of iron tubing. One of them slipped and the tubing struck the back of his head. He suffered dizziness and blurred vision.,1
"An employee was operating a header machine when his foot slipped from the brake and his right hand thumb was caught in the machine, amputating the tip of his thumb.",0
"An employee was moving metal walls on a movie set, setting them against the side of a truck. One of the walls fell forward and struck the employee on the head, tearing ligaments in the employee's neck.",1
The mobile gantry crane was being assembled when a collapse occurred and a piece of the crane struck an employee and fractured their right leg.,1
"On 02/18/2020, at 9:15 a.m., an employee was working on a packaging line that was feeding film when product started jamming. As he attempted to get a better visual of the heat cramp sealer, his right hand was pulled into the heat cramp sealer area, resulting in a right thumb tip amputation. The heat cramp sealer was unguarded at the time of the incident.",1
"An employee was framing a soffit at the top of a scaffold. He pushed himself using bars attached to a desk as leverage. The scaffold started to roll too fast, and when he tried to stop it, he fell approximately 5 feet from the top of the scaffold onto the concrete floor. He suffered a cut on the head, a right knee and lower leg fracture, and a left knee fracture.",1
An employee was using the bagel slicing machine when a bagel got stuck. The employee was removing the bagel when their right middle fingertip was amputated.,0
"An employee slipped on a damp walkway and overcompensated to keep from falling down, resulting in a fractured left ankle. The employee was hospitalized.",1
"An employee was cleaning a cement mixer when the mixer paddle struck the employee's finger, resulting in an amputation to the right index finger.",1
"An employee was verbally harassed by a client and experienced extreme heart palpitations and a spike in blood pressure, requiring hospitalization.",1
Two employees were  pushing a cart when one of them suffered a hernia.,1
"An employee was standing on a forklift/picker platform, retrieving product from a third-tier shelf. He fell about 15 feet, suffering a broken wrist, broken ribs and a head wound that required stitches. The employee's lanyard was not connected at the time of the fall.",1
"An employee was walking from her personal vehicle back into the school by going down an embankment that was 18 feet long and had a slope of approximately 70 degrees. While walking down the embankment, she fell and broke her left leg (fibula and tibia).",1
An employee was caught in the track of a moving excavator. The employee's ankle was broken.,1
"An employee was loading rail cars. The employee fell from a car, suffering broken ribs and further injuries, and was hospitalized.",1
"A welder/fabricator was moving an 8-inch-diameter, 8-foot-long pipe across a table to where other pipes were. The pipe rolled over his left hand, fracturing and lacerating his ring and middle fingers.",1
"An employee was trying to remove jammed material from a bagger machine when the employee's right middle finger was caught in the machine, resulting in a finger tip amputation. The machine guard door was open at the time of the incident.",0
An employee was observing a forklift unload his 44-foot trailer when he was struck by a steel round bar (1 ft. 11/16 in. diameter; 24 ft. long and weighs 186 lbs.) as it was forklifted from his trailer. He sustained a fractured right arm and lacerations to the back of his head.,1
"On February 19, 2020, an employee fell from a 10-foot step ladder while climbing it to power-wash walls. The employee landed on the ground and suffered a broken rib, a facial contusion, and a leg injury.",1
"An employee was pin spotting or installing rivets on panels. The panels were coated with an adhesive, and the tool used to rivet the panels caused a spark that ignited the adhesive. The resulting flames caused second degree burns to the employee's face, burned the employee's head and hair, and caused a possible respiratory tract injury. The employee was hospitalized.",1
"An employee was repairing a bushing on a fixture stand in a repair area, using a portable drill tool with a deburring attachment. The tool started to jump around, and the employee's left gloved hand made contact with the deburring attachment. The employee suffered a laceration to the top of the hand and an amputation of the tip of the little finger.",0
"An employee was using a mobile trash tote to take garbage to the dumpster. The employee was propping the mobile tote between the dock and the dumpster when the mobile tote began to slip and caught the employee's left middle finger between the tote and the dumpster. As a result, the employee's left middle finger was partially amputated.",0
"An employee was installing wiring for new screens inside a canopy. An access door gave way and she fell through it, landing 17 feet below and suffering facial and arm trauma that required surgery.",1
"An employee's hand slipped while changing a belt on an air handling unit. The employee's left pinky, ring, and middle fingers were lacerated and fractured as they were caught between the belt and the pulley. The unit was powered off at the time of the incident and a lock out/tag out procedure was followed prior to starting work on the unit.",1
"On February 19, 2020, an employee was adding chemical to an alcohol wash holding tank when alcohol wash splashed onto the employee's clothes. The employee put the shirt on the ground and tried to burn off the alcohol with a torch. The shirt caught fire and set the employee's pants on fire as well. The employee suffered burns to the hands, arms, chest, and legs.",1
"An employee was cleaning a dough roller with a towel. The machine caught the employee's right hand, breaking it.",1
"An employee was cleaning a hog farrowing floor with a high-pressure washer. The water jet cut through his boot into the top of his foot, causing laceration, trauma, and infiltration of hog manure. The employee was hospitalized.",1
An employee was shifting paint containers around on a 5- or 6-foot-high scaffold when she lost her balance and fell off of the scaffold to the ground. She suffered a broken leg and was hospitalized.,1
"An employee was tracking the transfer belt on a machine when his hand was pulled by the belt, resulting in a fracture to his arm.",1
"On February 19, 2020, an employee was cleaning a roll on a printer press when the employee's hand was pulled into a running nip point on the press. The employee suffered a partial amputation of the right thumb and right middle finger as well as damage to the right pinky finger.",0
"An employee was on-site (outside) working on a forklift battery. He was burning a negative cable on the battery. When he finished, he pushed the battery back into the forklift. He noticed that the battery was on an incline and it was slowly moving. He grabbed the battery and his right index finger was pinched by the battery causing injury to the finger.",1
"An employee was standing on a customer's dock when a reversing forklift struck the employee, resulting in a broken left arm and hand.",1
An employee was performing well servicing operations when a swivel amputated a thumb tip.,0
"An employee tripped and fell while walking through a lobby. The employee suffered a left wrist contusion, a laceration at the upper left lip, and a possible concussion.",1
An employee was attempting to unjam an auto shear machine when his hand entered an area where a temporary guard was loose and the machine amputated his left pinky finger.,1
An employee was pulling a door slab from a shelf when he lost balance and fell backwards onto the concrete floor. He suffered an injury to a spinal disc and was hospitalized.,1
"An employee was using his right hand to remove jammed paper from a paper machine when his right arm and hand were caught between two rope sheaves, causing severe lacerations, a severed main artery in the forearm, and a fractured hand bone. The machine was unguarded at the time of the incident.",1
"An employee was using an angle grinder to grind out imperfections in a concrete curb. The grinding wheel exploded. Flying pieces of it hit his left knee pad (causing the knee to swell) and lacerated his left index finger, damaging the bone.",1
"An employee stepped up on the second step of a step ladder. Some screws/the connector had broken off the ladder, causing it to collapse. The employee fell to the floor, suffering a back injury.",1
"An employee was getting out of a forklift truck when he slipped on ice and fell, breaking his leg.",1
An employee was handling pallets when fiberglass particles became airborne and caused the employee to experience lung irritation. The employee was hospitalized.,1
"An employee was setting up to replace elevator cables when the employee's finger was caught in a cable shackle, resulting in a fingertip amputation.",0
"An employee fell from a 71-inch stair platform, suffering a broken right arm and right hip. The platform did not have a handrail at the time of the incident.",1
"On 2/19/2020, an employee was removing food items from a wooden pallet when she tripped and fell on the corner of the pallet, injuring her left knee and elbow. She was hospitalized and required knee surgery.",1
"A truck knocked over an employee, who suffered broken bones.",1
An employee was installing a carpet runner under a roller table. The employee's left ring fingertip was caught and injured between a roller and a metal plate. The fingertip was medically amputated.,0
An employee's hand entered a rethermalizer machine and sustained a second degree burn.,1
"Two employees were assembling doors onto storage cabinets while the cabinets were laying on their backs. After attaching the doors, they stood the cabinet up onto a wooden dolly. The doors came open and the excess weight away from the center of gravity caused the cabinet to fall forward on top of one employee. The employee was hospitalized with abrasions to the left arm and pelvis.",1
"An employee climbed to the top of a ladder and was stepping onto a roof when he lost his balance and fell toward the ground. A coworker caught him under his arms from behind, preventing his head from hitting the ground, but not before his heels hit the sidewalk hard. He suffered a compression fracture and heelbone fractures, requiring hospitalization.",1
"On February 19, 2020, an employee was working to clean a salt spreader on a landscaping truck when the employee's right arm was caught in an auger, crushing and breaking bones in the arm.",1
"On February 19, 2020, an employee was operating a pallet jack when it crushed his foot between steel shelving uprights. He suffered a broken ankle.",1
An employee slipped on ice and fell to the ground at a customer's site. The employee sustained broken ribs.,1
"An employee was on a catwalk performing a fire watch for a welder when the catwalk collapsed during the weld. The employee fell 12 feet from the catwalk, sustaining a hairline fracture to his neck.",1
An employee suffered a back strain while preparing a hotel room for pest treatment.,1
"While working on a cup polisher machine, an employee suffered an amputation to the left middle finger at the first joint.",0
"An employee was standing on a hatch cover, removing twist locks on the forward end of a container. A container attached to a crane spreader struck and pushed the employee, breaking the employee's right arm.",1
"An employee was removing a chain binder holding a 54-inch concrete stormwater pipe. As he snapped the binder free, the chain released and caught his left index finger and thumb in the chain links. As a result, his left thumb tip was amputated and his left index finger was fractured.",0
"An employee and a coworker were completing a roll change at the caster runout. They had already removed the old roll and were putting the new roll into final position. The roll was supported by an overhead crane. The coworker on the west end of the roll was providing hand signals to the crane operator in the cab. The injured employee was on the east end of the roll trying to guide the bolts into the bolt holes. The injured employee's finger was caught between the flange of the bearing housing and a piece of key stock welded to the structure, resulting in a right index finger amputation at the first knuckle.",0
"An employee was reaching over an asphalt machine. The employee's jacket sleeve was caught between the trunnion and a tire, causing a partial amputation of the left ring finger and the laceration of the left little and middle fingers.",1
"An employee was checking an asphalt machine on an asphalt plant truck when his jacket sleeve was caught between the trunnion and the tire. As a result, his left ring ringer was partially amputated and his left pinky and middle fingers were lacerated.",1
"An employee was using a hole saw to cut a hole in a plywood sheathing to install a toilet flange when the saw became caught and kicked back, striking the employee's leg above the knee. The employee sustained a severe laceration to the lower right thigh.",1
"An employee was unloading a trailer when a crate fell on his head, causing a concussion.",1
"An employee was moving a man lift when the lift wobbled and landed on his left arm, causing tendon damage that required surgery.",1
"An employee was working on an end dump truck. While he was flushing the hydraulic pump's pipes out with air, the tank blew off and struck his right leg, dislocating his right knee and partially cutting the interior artery.",1
"An employee was working on drywall trim from a platform about 3 feet above the ground. The platform collapsed and the employee fell, suffering a broken right tibia and fibula.",1
"An employee was performing housekeeping and cleaning up wood used to build forms. She was dragging a heavy wooden saw horse while walking backwards when she tripped over a stack of rebar and impacted the ground, fracturing her right femoral head.",1
"An employee was exiting the bus when she fell head-first onto the bus stairs, suffering broken ribs, a head injury, and loss of consciousness.",1
An employee tripped over an extension cord and injured her shoulder and hip on the ground.,1
"An employee slipped from the steps of a deicer truck and fell to the ground, suffering a broken right tibia and fibula. The employee was hospitalized.",1
"An employee was operating an electric pallet jack when the jack pinned his leg against a rack. He suffered a broken leg and was hospitalized, requiring surgery.",1
"An employee was working from a pallet to remove a bale from a compactor when he fell backwards, striking his head on the ground and requiring hospitalization.",1
An employee was standing next to a mini excavator being used to push PVC pipe under a golf cart path when the PVC pipe shattered. He was struck in the left eye by a piece of the shattered PVC pipe.,1
"An employee was taking boxes of food down a ramp on a dolly. The employee fell, suffering a head injury. The employee was hospitalized.",1
"An employee was hammering a nail to install siding onto a building when the nail ricocheted and flew back, striking his right eye.",1
"An employee slipped on ice in the parking lot and fell to the ground, hitting her head and suffering a brain bleed. She was hospitalized.",1
"An employee was replacing a part in a press brake when the part shifted, catching his right thumb and resulting in a thumb tip amputation.",0
"An employee was moving a bundle of pipe when his left hand was caught in the bundle, resulting in a left ring fingertip amputation.",0
"An employee was stepping out of a truck at a worksite when he slipped on ice and fell to the ground, hitting his head. He was hospitalized.",1
"An employee was loading material into a cure press using a mobile ladder. While descending the ladder at a height of 3 feet, the employee tripped and fell into a nearby forklift, suffering broken bones.",1
"An employee was working aloft in a locust tree with his tie-in point high in the middle of the tree. He had worked his way out on a branch to make the needed cuts and was walking back in toward the main trunk when he slipped and swung back into the trunk. He struck his foot, causing a break in both bones of his lower leg.",1
"An employee was working on the vertical slide of a sub-arc. The motor bolts were loosened and as the employee pushed on the motor to adjust the tension on the belt, the slide dropped down and pinched the employee's thumb, amputating it to the first knuckle.",0
"An employee was on a table storing materials on an upper shelf when he fell from the table to the ground, breaking ribs on his left side and suffering a concussion. He was hospitalized.",1
A corrections officer was escorting an inmate to his cell. The officer was opening a shower door when the inmate attacked him. The officer was hospitalized with scratches to the face and neck and contusions to the eyes.,1
"A crew was clearing away signage and cones after a survey. A vehicle struck an employee who was putting cones into the back of a truck, causing the amputation of both the employee's legs.",1
"An employee was moving a reel with a crane. The crane topped over and the employee fell out, suffering a shoulder injury. He was hospitalized.",1
"A maintenance employee was conducting maintenance on the left side of a gang saw while other employees were changing a saw blade on the right side of the equipment. Once the saw blade was attached, the equipment began operating and the maintenance employee was caught in a pinch point, suffering injuries to the left hip and pelvis.",1
An employee was coming down a straight ladder when it slid and he fell to the ground. His left leg was broken in two places between the knee and the ankle. He was hospitalized.,1
"On 2/20/2020, at 11:00 a.m., an employee was bagging a mattress using a bag sealer when the bag sealer amputated a finger on the employee's left hand.",0
An employee was removing runners from a notching machine when their right hand was struck by the rotating notcher head. The employee's right index and ring fingers were amputated at the first knuckle. The middle and pinky fingers were also injured.,0
An employee was constructing a pergola in the backyard of a residential property when a beam being hoisted by a winch fell from the top of the pergola and struck the employee. The employee was hospitalized with broken ribs and a punctured lung.,1
"An employee was walking to his truck to get tools when he slipped in mud while walking down an incline. His right foot became stuck in the mud, resulting in a broken fibula and tibia.",1
An employee was erecting a concrete form from a scaffold when his anchor system collapsed and he fell about 20 feet to the ground. He suffered a broken leg.,1
"An employee was rolling a 550-pound truck tire rim across a shop floor. The rim tipped over and struck his hip and leg, breaking the leg and damaging the hip.",1
"An employee was bending a metal sheet on a flip forming and bending machine when his gloved hand was pulled in between the rollers, crushing his middle and index fingertips.",1
"An employee was helping an extruder operator with the machine when he attempted to prevent a wrap-up and his left arm was pulled in between two rolls, causing lacerations.",1
"Two employees were lifting a solar panel when one of them suffered a hernia. The employee was hospitalized, undergoing surgery.",1
"An employee was reaching to attach a sign cable between two I-beams while standing on a 4-foot ladder when the employee fell about 4 feet to the concrete floor, suffering a fractured hip.",1
An employee had been pushing a car and later collapsed to the floor with chest pains and was coughing up blood. The employee was hospitalized with a tear where the esophagus and stomach meet.,1
An employee was in a construction zone inspecting the road when a car drove through the work zone and struck the employee. The employee was hospitalized.,1
"An employee was operating an overhead crane to move a coil to a staging rack. After setting the coil down next to another coil, the employee did not move the chain, which was caught between the two coils. When the employee went to move the crane with the lodged chain, the coil became unstable and began to fall. The employee stepped out onto the staging rack to stabilize the coil with his hands. The coil was too heavy and fell onto the rack and the employee's right and left legs. As a result, the employee suffered amputation of the left leg and a fracture to the right leg.",0
An employee was tying rebar when a post-tension cable snapped and struck the employee's hands. Both thumbs were lacerated.,1
"An employee was operating a band saw and using a push stick. He placed material on the table and secured it with clamps. The material became jammed, so he moved to the other side and activated the saw blade. The saw blade caught the push stick and amputated his right index finger.",1
"An employee was dismantling a scaffold while working on an elevated platform that was lifted on the forks of a telehandler forklift and was equipped with a steel guardrail system. The employee was working from one side of the platform and slid a 24-foot aluminum scaffold platform from the wall bracket onto the top of the guardrail. The scaffold platform pivoted on the guardrail and fell 12 feet to the ground below. The employee was holding onto the platform as it fell and was ejected from the platform onto the ground below. The employee was hospitalized for a concussion and fractures to the hip, wrist and ankle.",1
"An employee was operating an order picker to place pallets on shelving when he lost his handle on the controls and overcorrected. The order picker then struck a rack, and his arm was caught and broken between the rack and the order picker.",1
"An employee was acting as a spotter for the loading of a rig pump. The employee tried to remove a pin that was in the way of the resting point of the pump and his right thumb was caught in a pinch point, resulting in an amputation of the thumb at the first knuckle.",0
An employee was bending down to pick up a hose to connect to a pump to pressurize it when he felt pain. He was hospitalized and required surgery for a hernia.,1
A reach truck struck an order picker. The employee operating the reach truck suffered a cut left Achilles tendon.,1
"An employee was manually rotating the rubber ironing roll of a separator to back-thread the tail through the machine in order to make a splice. After making a couple of rotations, the employee's right index finger was caught between the rubber roll and the material on the arbor roll, pinching and causing a partial amputation of the left side of the employee's right index fingertip.",0
"An employee was walking on a shanking conveyor when he slipped while stepping over a piece of conduit. His hand went into a chain and sprocket on the roller conveyor, resulting in an amputation to his right ring fingertip. The chain and sprocket were unguarded at the time of the incident.",0
An employee fell on ice while delivering auto parts to a customer. The employee suffered a broken hip.,1
"An employee was clearing a jam when his right hand came in contact with a knife head, resulting in the amputation of his right thumb and finger.",0
"An employee tripped and fell to the ground while walking though a doorway, suffering a fractured hip.",1
"An employee was helping a driver reverse a vehicle using hand signals when the employee was pinned between two vehicles, resulting in muscle damage to the left thigh.",1
"An employee was working on the top section of a 4,160-volt switch gear. The employee's hat fell into the bottom section of the switch gear, and an arc flash burned the employee's face and left hand as he was retrieving it.",1
An employee was working as a trim inspector while standing on a bulk scale when a powered industrial truck operator struck her. She was hospitalized with fractures to both ankles.,1
"An employee was reaching with a push stick to adjust an empty plastic bottle that was stuck about 14 feet overhead. A forklift backed out of an 18-wheeler trailer and struck the employee's right leg, breaking it. The employee was hospitalized and the employee's right foot was medically amputated.",1
A crew was in the process of adjusting the rigging on a flat rack when a pipe shifted and contacted the injured employee's right leg.,1
An employee was calibrating the dye on a hydraulic press when the employee's right thumb was caught and amputated in a pinch point on the hydraulic press shaft.,0
"An employee was picking up debris and placing it in refuse bins when a nearby forklift operator reversed without looking and hit two pallets. The pallets hit the employee, who suffered a right leg injury.",1
"Two employees were diagnosing a bundling machine and were in the process of removing blocks.  When the employees actuated the bundling machine, the machine lifted but the machine frame did not. One employee had his fingers between the frame and machine at the time, resulting in the amputation of the employee's right middle and ring fingers.",0
An employee was operating a lathe when the lathe amputated the employee's finger.,0
"An employee was stepping onto a roof from a ladder. He slipped and fell, landing on the ground 12 feet below and suffering an injury to a lower-back disk.",1
"An employee was driving a lowboy to move equipment off a construction site. While exiting the vehicle, he fell approximately 4 feet onto the gravel surface, fracturing his left fibula and tibia.",1
"An employee was walking through a doorway and pushed on the swinging door. The employee expected more resistance and fell to the concrete floor, suffering a right hip injury and a fractured femoral neck bone.",1
"An employee was operating a digger derrick to dig for utility line access. While he was troubleshooting the faulty boom of the truck, his hand was placed on the boom, crushing his left ring finger.",1
"An employee installing solar panels on a residential roof fell to the ground and broke an arm, requiring hospitalization.",1
"Two employees were working in a lift. The lift was raised and a beam struck one employee's hard hat, cutting the employee's ear.",1
"An employee was loading a semi-trailer when a load bar impacted a pallet. The pallet and load then struck the employee, who suffered a broken right leg.",1
"An employee's left index fingertip was caught in a folding cement chute, resulting in a fingertip amputation.",0
"An employee was pinned between two pickup trucks inside the building, sustaining external and internal bruising in the abdomen.",1
An employee was removing a die set when his left middle finger was caught between the cradle and the safety guard. The tip of the finger was amputated.,0
"An employee was pushing down a loading dock plate when it came down on the employee's hand, amputating the tips of the employee's right middle and index fingers.",1
"After running overhead beverage lines in a restaurant, an employee jumped off a ladder, landed wrong, and suffered a broken foot. He was hospitalized, requiring surgery.",1
An employee was using a table saw when it kicked back while the employee was cutting wood. The employee suffered an amputation of the right pinky fingertip.,0
An employee was removing a pallet from a bucket truck in a production area. He slipped and fell on his left hip fracturing it.,1
"An employee was attempting to clear a pellet clog in a conveyor using a wrench when the hand wrench contacted the moving conveyor chain, causing the wrench to move forward and resulting in the employee's right index finger being pinched between the wrench and the conveyor housing. The employee sustained an amputation of the distal right index fingertip.",0
"An employee was dumping a tote of rice using a forklift. The employee dropped his work knife. As he went to retrieve the knife, his right hand was caught in a lump breaker resulting in nerve damage.",1
An employee attempted to untangle ends on machine when their right hand got caught in the yarn and severed the tip of employee's pinky finger.,0
"An employee was observing a welder when a piece of angle iron fell on the employee's left foot, breaking a toe.",1
An employee fainted after attending to a patient and broke their right ankle.,1
"An employee was pouring molten iron back into a furnace using a ladle. The metal splashed onto his lower body, burning his waist and legs.",1
An employee was feeding paper through a winder. The paper did not transfer from the back of the drum to the roll; the employee was trying to transfer it when the front drum came into contact with her left arm and pulled it into the nip point between the roll and the drum. The arm was bruised.,1
"After assisting a customer, an employee became dizzy and stumbled to the floor, hitting their head on a shopping cart. The employee was hospitalized.",1
"An employee was lifting rollers when one of them fell on his right big toe, lacerating it.",1
An employee fell from an 8-foot A-frame ladder while carrying a sheet metal part. The employee sustained a laceration to the left side of his face and a broken shoulder.,1
"An employee was standing next to a pallet, cutting stretch wrap. A forklift backed into him, pinning his left foot against the pallet and breaking it.",1
"An employee was carrying mail on a postal route when she tripped while stepping over a brick. The employee fell to the ground, breaking her left arm. She was hospitalized.",1
"An employee was moving a motorcycle from the service area to the pre-owned area. The employee lost control of the motorcycle, jumped off, and the motorcycle fell on top of him. He was hospitalized with broken ribs and a punctured lung.",1
"A temporary employee was positioning a pipe in a sledger when it crimped on the pipe, catching the employee's left hand and partially amputating the thumb and forefinger.",0
An employee was in a scissor lift using a sheetrock knife to cut sheetrock. He was putting the knife on the tray when his arm hit the cable tray causing the knife to ricocheted out of his hand and strike his left eye causing damage to the retina.,1
A host in the restaurant tripped over a chair leg and fell breaking the right femur.,1
An employee was getting bales of hay for a customer from a trailer using a bay hook. The bales of hay fell onto the employee causing a fractured knee cap and a torn meniscus and ACL.,1
An employee was operating a storm water lift pump and hot water condensation blew out of the atmospheric muffler vent onto the operator's back causing first and second degree burns.,1
A cashier was pushing shopping carts in a crosswalk on the main lane in front of the store when a vehicle impacted the shopping carts and subsequently struck the employee. The employee suffered a concussion.,1
"While operating a ride-on electric pallet jack, an employee got caught between the pallet jack and the wall. The employee's ankle was fractured and he was hospitalized.",1
"An employee was using a spray bottle to clean a coating machine. The employee dropped the spray bottle, and when he reached for it, his hand was caught in the machine. His hand was crushed and lacerated. The machine was running at the time.",1
"Two employees were performing a changeover of steel rolls/tooling. While one employee was pushing a metal roll stand back onto a shaft, the injured employee's left middle finger was caught between the metal spacer and the key-way of the metal stand. The fingertip was amputated.",0
"While climbing a fixed ladder to access the roof, an employee slipped and fell 6 to 7 feet and landed on the floor, sustaining a lower back injury.",1
An employee was breaking down equipment and was found laying on the ground with head trauma and lacerations. Pieces of support truss were nearby.,1
"On February 23, 2020, at approximately 12:30 a.m. an employee was working in a commercial bakery on a bread line machine where the dough is rolled into a loaf. The employee needed to clean the machine top belt, which is done by manually opening the top of the belt in a door-like fashion. The employee finished cleaning the belt and when he closed the belt manually, the employee's left pinky finger was closed in the belt and amputated.",0
"An employee was on a 7-step rolling staircase to clear a jam on the overhead conveyor. While clearing the jam, the staircase shifted and the employee lost balance and fell over the railing onto the ground causing a partial collapse of the right lung.",1
An employee was operating a ride-on pallet jack when his thigh was caught between the pallet jack and a material rack. He sustained a bruised left thigh and possible hematoma.,1
"An employee was servicing an air conditioner unit at a customer's house. Upon completion, the employee attempted to disconnect a Freon gauge from the air conditioner unit. One of the valves got stuck and Freon gas started to flow out. The employee reapplied the gauge as the Freon was coming out and sustained freon burns to both hands.",1
An employee was unloading palletized scrap metal from the bed of a bobtail truck using a pallet jack. The pallet of scrap metal started to fall over the edge at the end of the truck causing the pallet jack to raise up and crush the employee's right index finger between it and the scrap metal. The fingertip was amputated.,0
An employee was walking on a crushed-stone path from the work area towards his vehicle when he slipped on ice that was obscured by standing water and fell to the ground. He sustained fractures to the left ankle and left leg.,1
"While an employee was removing a guard, the guard slipped and pinched his left index finger. The finger was amputated.",0
An employee was using a reciprocating saw to trim excess conduit and sustained lacerations on the elbows and knees.,1
An employee was off loading a drill stem using a caliper. The drill stem fell out of the caliper and fractured the employee's left leg.,1
"An employee was executing the removal of the unloading arm coupling blind and was struck by the coupling blind. The employee was hospitalized with a fracture to the arm/wrist, fractured ribs, and amputation of the right index finger.",1
"An employee was loading a folding ladder onto a golf cart. The ladder tipped forward and pressed the accelerator, causing the cart to drive forward and run over the employee's foot. The employee's foot was broken.",1
"An employee was installing a valve on a compressor cylinder. The valve flipped and as the employee tried to stop it, his hands were caught in a pinch point causing amputation of the middle, ring, and pinky fingertips on the right hand. The employee was hospitalized and the fingertips were reattached.",0
An employee working as a chemical operator was attempting to light one of the mills. Solvent vapor was ignited by a spark and the employee was burned on the face and hand. The employee was hospitalized.,1
"An employee was applying double-sided tape to the slitting machine core when the positioner came across and caught the employee between the slitting machine and the positioner. The employee was hospitalized with a head laceration, fractured sternum, and two fractured ribs.",1
"While pumping fluid out of a pit into a vacuum truck, an employee slipped from the operator's platform and hit his knee on the ground. The employee suffered a knee injury that required surgery.",1
An employee was repairing a clogged drain on an automatic beverage machine at a restaurant. The employee heard a popping noise while lifting the machine over drain pipes. The employee sustained a hernia.,1
An employee was hospitalized with a fractured ankle after tripping over a gas pump hose and falling at the gas station.,1
"An employee was securing a load on a flatbed trailer and fell off the trailer onto the ground. The employee sustained broken ribs, swelling around the spine, and an abrasion above an eye.",1
An employee was making coffee. The coffee pot overflowed and the employee's hand was burned.,1
"An employee was walking up a ramp placed on the bed of a straight truck. The ramp fell off the truck and the employee fell on top of the ramp resulting in broken ribs and vertebrae.

See 1547058 for information on a second injured employee due to this incident.",1
"An employee was walking up a ramp from the ground into the back of a truck when the ramp fell from the truck. The employee fell onto the edge of the ramp and sustained fractures to the ribs and vertebrae.

See 1547045 for information on a second injured employee due to this incident.",1
"An employee was replacing a bearing on the shaker table. The injured employee and three co-workers were trying to place the shaker table back on the central pin, when the injured employee lost their grip and the shaker table came down on their right hand. The right index finger was broken in two places and the middle finger was broken and lacerated. The injuries required surgery.",1
"A carpenter was cutting 5-inch shims for a door jam project. While cutting on two saw horses, his saw kicked back and cut his left hand which was holding the wood board. He was hospitalized for a cut to his first and fifth digits and a severed tendon on the first digit that requires surgery.",1
An employee's right index fingertip was amputated when he manually pushed an endplate down the shaft into the motor housing unit.,0
An employee was removing a high mast light pole at a highway interchange. The crane rigging broke and struck the employee resulting in a broken arm.,1
An employee was cleaning the production floor in the packaging room. The employee reached for a water hose in front of the bagger and fell. The employee sustained chemical burns to the right buttock from the cleaning product.,1
"An employee was using a drill to mix concrete inside a 5-gallon bucket. When the employee checked the drill's chuck to see if it was loose, the left index fingertip portion of his glove got caught in the teeth of the spinning chuck and the employee's finger was amputated at the first knuckle.",1
An employee was using a squeegee to apply roofing paper on a commercial roof. The employee fell 7 feet onto a lower roof adjacent to the building and suffered bruised vertebrae.,1
An employee was conducting demolition and repair work on a concrete parking garage stairwell. The employee began to remove concrete slabs from the top of the second-floor platform when the metal sub-sheet underneath him collapsed and he fell approximately 10 feet through the opening. He landed on the concrete ground and sustained fractures to his hands and pelvis.,1
"An employee was standing on top of stacked wooden utility poles that were positioned on a flatbed trailer while connecting lifting chains to one of the poles to be unloaded. While connecting the lifting chains, the employee lost his balance and fell approximately 10 feet to the earthen ground, sustaining a fractured right tibia.",1
"On February 24, 2020, an employee was feeding bonobo monkeys when she lost her balance and  her right index finger went though the mesh. The monkey bit her finger resulting in amputation of the finger from the nail up.",0
"An employee was working as a chill cell helper to move the trays of meat on the rail system to and from different coolers. The employee was moving a 1500 lb. rack of meat along the overhead rail system. When the employee came to a switch (interchange), the rack fell from the overhead rail system and struck the employee who fell to the concrete ground. The employee sustained fractures to the back, pelvis and sternum.",1
An employee was power washing a previous concrete pour to prep for the next pour when he stumbled over the steel mesh that was in place. He then lost control of the power washer wand and the top of his left boot was punctured by the hot water. He sustained second and third degree burns to the foot and was hospitalized.,1
An employee was cutting a 2x4 with a circular saw. The board twisted and the saw kicked back causing a partial amputation of the left ring finger.,1
An employee was found incoherent with injuries to the face and arm and was hospitalized. The employee may have fallen from a ladder.,1
"An employee was draining condensate from an air compressor when a catastrophic failure occurred on a check valve on a natural gas line. The natural gas began blowing toward the running compressor and the gas ignited causing an explosion. The employee was hospitalized for second and third degree burns to the face, hands, left leg, and left midsection.",1
An employee was grinding a spring and suffered a partial amputation to the left ring finger.,0
An employee was operating the former machine and crushed three fingers on their right hand. Two fingertips were amputated.,0
"An employee had parked their vehicle in an offsite parking garage on the third level and proceeded to the south stairwell to go down to the shuttle bus on the ground floor. The employee missed a stair and fell, sustaining fractures to the second, third, and fourth metatarsals of the left foot.",1
An employee slipped and fell onto the floor while picking up an item. The employee suffered a fractured pelvis.,1
An associate was walking through the lawn and garden center and tripped over a grate in the ground and fell resulting in a broken left elbow that required surgery and hospitalization.,1
"An employee was on an 8-foot step ladder taping a camper to prepare for painting. When he descended the ladder, he missed the last rung and fell backwards hitting his head on the concrete ground. The employee suffered a laceration and bruises to the head.",1
An employee was trying to unrig sheet pile and crushed the tip of their index finger causing an avulsion injury.,1
"An employee was welding a piece of 36"" cutter pipe on a welding table. When the table was moved, the pipe fell onto the employee's knee, fracturing his tibia. He then fell from his stool and suffered a laceration to the side of his head.",1
"While washing the inside of the walk-in cooler, an employee slipped on ice and fell to the floor. He was hospitalized with a back injury and a cut on an eyebrow.",1
"An employee was removing a CB antenna on the platform on the side of a tractor-trailer. As the employee descended the platform, he missed a step and fell to the ground onto his back. The employee sustained a back fracture requiring hospitalization.",1
"While walking down an aisle in the restaurant, an employee slipped, hit her head on a table, and fell to the ground. The employee was hospitalized with a forehead laceration.",1
"On February 25, 2020, an employee slipped and fell on the icy sidewalk while walking to work from the parking lot.",1
The injured employee was standing beside a forklift going through paperwork. The forklift operator moved the forklift and it struck the injured employee resulting in a broken left fibula.,1
An employee had been fastening a wooden splash guard to the backside of a cleaning table in the Caustic Room using a power drill. He began to have trouble breathing and felt ill. The employee was hospitalized.,1
"An employee opened the rear door of an open top refuse container and was struck by a roll of plastic sheeting that weighed approximately 300 pounds. As the roll struck him, the employee fell backwards and struck the back of his head on a concrete pad. Another roll of plastic sheeting dislodged from the container and landed on top of his legs. The employee sustained fractures to his right ankle and pelvis, as well as a laceration to back of his head.",1
"An employee was changing the blades on a miter saw. A wood block was placed under the miter saw blades to hold the blades against the wood block. When the employee loosened the saw blade nut, the wood block slipped, and the saw blade came down and amputated their right middle fingertip.",0
"An employee was closing the cage door after walking the dog and the dog jumped up on door. As the employee went to close the door to prevent the dog from escaping, the dog bit her hand through the cage bars. The employee's left middle fingertip was amputated and required surgery.",1
An employee was walking around a desk and wiping it off when the employee tripped over wires around the desk and fell onto a metal chair resulting in facial cuts and a broken orbital bone.,1
"As an employee was repositioning a steel box fan, a can of glue fell into the fan. When the employee attempted to retrieve the can, her right hand contacted the fan blade and her index, middle, and ring fingers were broken and lacerated.",1
An employee was operating a wing saw in the debone area and sustained an amputation to a fingertip.,0
"On February 25, 2020, a driver was in the back of his delivery truck at a dock when he lost consciousness and fell to the floor. He struck his head, suffering head trauma, and was hospitalized.",1
An employee was repairing a window and fell through a floor opening resulting in fractured vertebrae.,1
"An employee had been picking up a load from a customer. The truck rolled over a curb into a gas line. The gas line ruptured and caught on fire. The employee exited the truck and jumped through the flames, sustaining second degree burns to the left hand and first degree burns to the right hand and face.",1
"While adjusting the forks of a forklift that were resting on a flatbed trailer, something shifted and the employee's left arm was crushed. The employee was hospitalized.",1
"An employee was attending a meeting near a production line. He activated a tilt table in order to move it out of the way. The table came down on his left foot, fracturing the big toe.",1
An employee was standing in the excavation area around a gas main at night signaling the excavator operator when the excavator bucket struck the employee's right foot causing four dislocated toes and tendon and ligament damage that required surgery.,1
"The injured employee was working on a coal car while the air valves were also being worked on. When air was connected, the doors closed on the injured employee's legs resulting in fractures to both legs.",1
An employee was approaching a skid-steer from the side when the skid-steer ran over his left foot and fractured a toe.,1
"An employee was walking back to the work area, slipped, and fell to the ground fracturing the right tibia and fibula.",1
"An employee was unloading shingles at a new construction job site. While trying to release a crane hook on the delivery vehicle, his left hand was caught in a pinch point between a spring loaded shackle and the track it rests on. The employee sustained partial amputations of the left middle and ring fingers.",0
"An employee was clearing a jam on a conveyor belt, slipped, and fell 1.5 feet to the floor sustaining a back injury. The employee was hospitalized.",1
An employee was trying to free a stuck truck when an ATV ramp dislodged and struck the employee's shin and fractured it.,1
An employee was loading parts onto the chuck of a surface grinder when his left hand was pulled in causing a partial amputation to the left index and middle fingers. The machine was guarded at the time of the incident.,0
An employee was using a concrete saw to cut up a demolished deck when the saw cut his chest.,1
"An employee was using a chainsaw to clear brush. While cutting a tree, the tree kicked out and struck the employee causing a lower leg fracture.",1
"An employee was getting off the bed of a truck, slipped, and fell to the ground fracturing their left foot.",1
An employee was performing a voltage check on 1440V and received first and second degree electrical flash burns to the face. The employee was hospitalized.,1
"At approximately 2:00 p.m., an employee working in the warehouse bent over to pick a piece of paper off the floor. At that time, a forklift was backing off from a trailer. As the forklift turned to the right, it made contact with the employee. The employee sustained foot fractures and was hospitalized.",1
An employee was installing an exhaust fan belt when their fingers were caught between the belt and the pulley. The ring and middle fingers on the right hand were broken and the right pinky finger was amputated above the fingernail.,0
"An employee reached for a valve stem pulling tool that was near the swing arm of the tire changing machine. At this point, the swing arm was moved and crushed the employee's fingertip against the adjustment knob of the tire changing machine's frame. The employee sustained an amputation to the right index fingertip.",0
"An employee was riding on the side of a front-end loader. It passed a pile of hardened dirt, which caught the employee's leg. The employee fell to the ground and suffered a broken right tibia.",1
"An employee was blowing excess sand off a pneumatic trash compactor skid that had recently been sandblasted prior to painting. While repositioning himself onto the platform, the weight shifted to one side, forcing the equipment to tip and pin him to the ground. The employee's right fibula and tibia were broken.",1
"An employee was working from a scissor lift. The employee fell from the lift to the ground 10 feet below, suffering fractures to the left wrist, hip, and vertebrae.",1
"An employee was working on a product's display foot to level the display out. The display tipped over, causing the employee to fall backwards and hit his head on the floor.",1
"An employee was transporting 50,000 lbs. of materials on a cart. The injured employee was standing nearby and the cart ran over their left foot resulting in five broken toes and abrasions.",1
"An employee was working on a printer machine, cleaning the front printer roller. Their rag was pulled into a pinch point and the right ring finger was pulled in and crushed resulting in a partial fingertip amputation.",0
An employee was unloading a trailer with a pallet jack when she tripped over an empty pallet and fell. Her left foot was struck by the pallet jack wheel resulting in fractures.,1
An employee jumped off a retaining wall and broke her left tibia and fibula.,1
An employee was operating a surface grinder and suffered an amputation.,0
An employee was lifting a metal plate with an overhead crane and a magnet. The plate or the magnet shifted and struck the employee's chin. The employee sustained a fracture and laceration to the chin and a concussion.,1
"While removing jammed bottles from a detabber machine, the operator's glove was caught in the ejection belt conveyor pulling his hand toward the belt. The employee's left ringer fingertip was amputated.",0
"An employee arrived at work and started shoveling snow. Within minutes, the employee felt upper chest pain and went back inside to alert others. The employee was hospitalized for a heart attack and underwent surgery.",1
An employee was walking back to his work station from the tool room when he tripped on a stand that holds the fans for the harvesters and fell onto the concrete floor. He landed on and fractured his right hip.,1
An employee was adjusting and tightening the chain links to a conveyor. The conveyor activated and the employee's right foot was caught between the chain and sprocket amputating toes.,1
"An employee was stocking shelves, tripped over a pallet, and fell onto a case of wine bottles. The employee suffered fractured ribs and a punctured left lung.",1
"A maintenance employee entered the cheese molding cell after de-activating it to troubleshoot the equipment. When the equipment was re-activated, the cheese lid armature moved and struck the maintenance employee on the face causing a laceration from the forehead to the lower cheek that required surgery.",1
Two employees were in a scissor lift removing a plumbing piece from the side of a building. The lift moved unexpectedly in reverse instead of down and the injured employee struck his head on a structural beam on the side of the building. He bounced back and struck his head on the rail of the scissor lift. The injured employee was hospitalized for head and face injuries.,1
"An employee was working in a yard when a panel shifted and pinned his arm, breaking it in two places.",1
An employee was adjusting a metal plow on a forklift and amputated their right pinky fingertip.,0
An employee was moving cereal boxes on shelves while on a step stool. The employee mis-stepped while descending the step stool and fell to the floor. The employee sustained a fractured left hip and injury to the left wrist and left leg.,1
"An employee was feeding plastic into a plastic bag manufacturing machine. The machine pulled in her right hand, partially degloving the front and back of it. She was hospitalized, requiring surgery.",1
An employee was using a handsaw in the debone area and amputated their left thumb.,0
A temporary employee was working at a brake press. The employee was sitting on a stool and lost balance. The employee extended their hand to the middle of the press to catch their balance and at the same time the machine cycled and amputated three fingers. The employee was hospitalized.,1
"An employee was clearing a jammed part in a tapper machine. The employee's right index fingertip got caught in the jaws of the tapper machine as they closed. When the employee pulled their finger back, their fingertip remained in the jaws and was avulsed, and the bone of the fingertip was fractured. At the time of the incident, the machine was in manual mode.",1
An employee was returning to her mail truck after delivering mail when she slipped on ice and fell on the ground. The employee was hospitalized with a broken ankle.,1
"An employee was in the back of a truck, loading it with product. The truck started and began to pull away from the dock. The employee fell out of the back of the truck and landed on the concrete ground. The employee suffered a broken ankle, a broken left tibia and fibula, and two broken ribs, and was hospitalized.",1
An employee was cleaning a restroom with a cleaning wipe and became ill from the fumes.,1
"An employee was working on a CNC machine. As he went to remove a part, the drill bit caught his glove and left index finger. The finger was fractured.",1
"Employees were on-site delivering a bundle of pipes. An employee was unloading the pipes by tying the pipes with a chain that was hooked to the back of a pickup truck. When the pipes came off the flat bed, one of the pipes struck the injured employee, who was standing on the ground near the flat bed, on the head resulting in a laceration.",1
An employee was operating a disc sander when his glove was caught in the sanding disc. The employee's right thumb was amputated at the first knuckle.,0
Two employees were removing an overhang bracket. One employee was holding the bracket while another employee was using an air impact wrench. The socket slipped off the nut causing the wrench to drop down and strike the employee's first finger on the right hand causing an avulsion between the second and third knuckle.,1
"At 1:00 p.m. on February 27, 2020, a temporary employee tripped over a pallet, fell, and hit her head on the concrete floor. She was hospitalized.",1
An employee sustained a fingertip amputation while operating a die cutting machine.,0
"Employees were using a rope puller to load a broken chipper onto a flatbed trailer. When the rope puller was tensioned, the hook broke; the rope and broken hook rebounded, striking an employee. The employee suffered a broken right arm and internal bleeding.",1
"An employee was standing on roof joists, installing plywood. He fell off the joist and landed on the floor about 7 feet below. He was hospitalized for a fracture injury.",1
"An employee was bending gutter straps using a motorized folding machine. The machine clamed on his right middle and ring fingers, crushing them and amputating the fingertips.",0
"An employee was standing on the steps of a single drum compactor, cleaning its windows. His left foot slipped from the wet front frame and he fell to the ground, breaking his leg.",1
"An employee was using a mortar mixer to mix fireproofing material. He was cleaning off the sides of the mixer drum when the mixing blade caught his fingers. His right index finger had skin removed, and his right middle fingertip was amputated.",0
An employee was working on a machine that draws welding wire when the wire pinched his fingertip between the cylinder head and the wire resulting in loss of the finger nail. The employee later sustained a partial left index fingertip amputation after treatment to close the wound.,0
An employee was removing a piece of meat left on a machine when the machine activated and amputated their right index fingertip.,1
"On February 27, 2020, at approximately 6:40AM, an employee was unhooking a load of galvanized steel from a crane when his right pinky finger was caught between the hook and the galvanized steel crushing the fingertip. The employee was hospitalized for surgery to remove the crushed fingertip.",1
"An employee was working in the pit under a vehicle. While using a two-handed tool to loosen a bolt on the vehicle, the tool hit the front passenger-side tire. The tool then pinched the employee's finger against the vehicle's skid plate resulting in a partial amputation to the middle finger on the left hand. The vehicle was not moving, but the tires were rotating at the time.",0
An employee was standing on the floor and bending over to stock shelves at ground level. The employee fell and sustained a broken right ankle.,1
"An employee was standing next to a forklift with steel totes on its forks. A tote fell off the forks, striking the employee's left arm and breaking it in two places.",1
"An employee was installing gutters on a newly constructed residential dwelling. The employee was climbing a portable extension ladder to install a downspout over the garage and fell approximately 10 feet head-first onto the concrete driveway. The employee sustained a skull fracture, swelling of the brain, eight broken ribs and a collapsed lung and was hospitalized.",1
"A machine operator and his co-worker were removing the gear boxes (weighing between 300 and 400 pounds) from the roll mill machine. His co-worker was using the forklift with a lifting strap attachment to lift a gear box off of the roll mill machine to be serviced when another, unbolted gear box got caught on one of the forks of the forklift causing it to break free and moved towards the machine operator. The machine operator moved away from the flying gear box, fell to the ground, and hit his head on a machine guard that was on the floor, causing a laceration to his ear and the top of his head and two cracked neck vertebrae.",1
An employee was checking a pumping unit to see if the belt was loose. The pumping unit activated and the belt amputated this right pinky fingertip.,1
"An employee was changing gaskets on a valve that contained condensate. When the employee opened the pipe/valve, he was sprayed with hot water and sustained first and second degree burns to the back and legs.",1
An employee slipped and fell on ice in a parking lot and sustained a broken ankle requiring surgery and hospitalization.,1
"An employee was going to visit a client. While going up the steps at a neighbor's house, the employee slipped on an icy stairway and fell down the stairs. The employee sustained a broken right ankle.",1
"At about 10:00 a.m. on February 27, 2020, a vehicle struck an employee as he was helping pedestrians at a crosswalk in a valet parking area. He suffered fractures to the shoulder, shoulderblade, vertebrae, and ribs, as well as a collapsed lung.",1
An employee was riding on a tug and suffered injuries to his neck and lower back when the tug went under a belt.,1
"A maintenance employee was visually inspecting a stacker package maker to troubleshoot a reported issue. He placed his right leg inside the roll case area of the machine to obtain a better visual. As he was looking upwards in an attempt to identify the issue, the stacker activated and a package of wood came down the roll case area and struck the employee's right leg. The employee sustained fractures to the right tibia and fibula.",1
"An employee was releasing the emergency release on a garage door. The door swung up, catching the employee's collar and pulling the employee off a telehandler basket. The employee fell 10-15 feet to the ground, suffering broken vertebrae.",1
"An employee was putting tires on a rack. He fell from the rack to the floor, suffering a head injury that caused brain bleeding.",1
"On February 27, 2020, an employee fell to the ground outside near welding gas cylinders, suffering a head injury. The employee was found unconscious and was hospitalized.",1
"An employee was manually pulling electrical wiring through the rear side of a 300-pound, partially assembled HVAC unit, when the unit tipped over and landed on the employee. The employee sustained a fractured lumbar vertebra.",1
An employee was shocked while moving components in an electrical outlet box.,1
An employee was moving furniture on a loading dock. The employee felt dizzy and fell backwards three feet off the loading dock to the ground. The employee sustained bleeding on the brain.,1
"An employee was pulling a pin from a stud in preparation for mooring operations. The pin struck the employee, causing contusions and a laceration on the right side of the face and a hematoma on the back of the head.",1
"An employee was moving a granite slab. The slab fell on the employee's foot, breaking it; the employee was hospitalized.",1
"An employee was changing a sensor on a tank. The scale on the tank read zero so he thought the tank was empty. When he removed the sensor, hot asphalt sprayed out and the employee sustained second degree burns to the face and arm.",1
"An employee was tasked with operating the rotary blast machine. While walking to his work station, he tripped on a piece of banding and fell to the floor, injuring his right hip. The employee was hospitalized and had surgery.",1
"An employee was assisting others carry a 3/4"" pipe. When he stepped on the edge of a 4"" concrete pad, the employee's ankle rolled and fractured.",1
An employee was cleaning up after replacing a motor on a conveyor. While trying to pick up the old motor it slipped and fell. The employee tried to catch it and the motor fell on his right hand causing broken bones.,1
An employee was part of a crew installing guardrails on the side of the highway. The employee was knocked down by a concrete truck and the truck ran over his toes. The employee suffered toe fractures that required surgery.,1
"An employee was loading two empty containers onto a forklift. They became tangled, and the employee left the forklift to straighten the load. One of the containers fell and struck the employee's right leg. The employee was hospitalized.",1
A bundle of angle iron was being lowered and the injured employee's left thumb was caught under the bundle resulting in amputation of the thumb tip.,0
An employee was cleaning the lobby area when he tripped over a broom and fell breaking his right hip.,1
An employee was operating a brake press and fractured two fingers and dislocated one finger.,1
"An employee was stationed on the ground hoisting materials via a crane. While following the materials on the crane, the employee tripped on a staged joist and fell injuring his left knee.",1
"During swabbing operations, an employee was changing a drain hose from one bucket to another when hydrogen sulfide gas released from the hose. The employee fainted and was hospitalized for hydrogen sulfide exposure.",1
"An employee was removing snow from their shoes after walking into work. The employee slipped and fell to the floor, suffering a broken leg.",1
An employee was shocked by an industrial vacuum cleaner while using it to vacuum blasting grit. The employee was hospitalized.,1
"An employee was moving pallets in a tractor trailer. A pallet fell onto the employee's face, causing a broken nose and fractures to the upper jaw and chest.",1
An employee was pulling a board with a bar from the rerun deck. The board struck the employee's lower right leg and fractured it.,1
An employee was roll-forming sheet metal into an 8-inch tube. The radius had been made too small. The employee tried to pull the metal piece out and their right hand was pulled into the roller. The pinky and ring fingers on their right hand were smashed resulting in medical amputation of the pinky finger. The machine was in auto-run at the time.,0
An employee fell from a telehandler basket onto the ground and suffered a broken wrist and arm injuries.,1
An employee retrieving a case of product which had fallen in an automatic storage and retrieval system (ASRS) was caught between the rack and the shuttle. The employee was hospitalized with broken bones in both legs and feet.,1
"An employee was monitoring machines on the production floor when he noticed plastic sticking to the head of the machine. As the employee tried to remove the plastic, the machine clamp closed on and crushed his left hand.",1
An employee was using a hand truck to move a large compression testing machine. The shipping weight of the item was 975 lbs. The load was top heavy and when the employee tipped it back it fell and struck his lower left leg causing a fracture near the ankle.,1
"An employee was moving a 550-pound titanium slab to another location on the plant floor using a  vacuum attached to a crane. She then went to mark the slab when the vacuum failed and the slab fell, pinning her right hand between the slab and the floor. This resulted in a fracture to the right middle finger and amputation of the right index fingertip.",0
An employee was repairing wood on the roof and fell approximately 18 feet from the roof onto the ground. The employee suffered fractures.,1
"A crew of ironworkers was disassembling am 1,100-pound steel jacking frame using chain hoists. The upper section of the frame freed from the upper bracket and the load became unstable, swung free, and knocked an employee to the ground. The employee suffered a concussion and lacerations to the kidney and pancreas.",1
An employee was pulling landscaping ivy from the grounds and felt chest pain. The employee was hospitalized with unstable angina.,1
An employee was removing a battery from a powered industrial truck (PIT) with a hoist. The battery fell from the hoist onto the employee's foot and caused a partial amputation of the second toe.,1
"An employee was struck by a concrete form and sustained a ruptured disk, and other related shoulder, back, and neck injuries.",1
An employee was testing the operation of a fan when a finger on their right hand was caught in the fan belt and pulley resulting in lacerations and a fingertip amputation.,0
An employee was pushing cattle in the pens when a steer jumped the 10-foot gate and struck the employee causing multiple facial fractures and a laceration across the nose. The employee was hospitalized.,1
"An employee tripped over a large dolly and fell to the floor, hitting several items on the way down. She suffered a broken bone in her left thigh and a strained right wrist.",1
"An employee was securing the lock on a container when a coworker pushed the adjacent container while his hand was still on the lock. His right index finger was caught between the container and the floor, resulting in a fingertip amputation.",1
An employee was shutting the back room exit door when wind caused the door to slam shut. The employee's finger was smashed between the door and its frame resulting in a partial amputation.,0
"An employee was operating a forklift behind the store when the forklift fell off the dock and rolled onto its side. The employee was hospitalized with a possible broken pelvis, arm, and rib.",1
"An employee was showing a camper to customers. When the employee tried to fold down a counter extension, their index finger was caught in the folding arm resulting in a fingertip amputation.",0
An employee was emptying a tub of ham shank bones situated near a band saw and contacted the saw blade resulting in amputation of the left middle fingertip.,0
"On February 29, 2020, a sales employee entered a tire service bay and tripped over a pneumatic air hose, striking his head on a wall.  He suffered a head laceration and two fractured vertebrae and was hospitalized.",1
An employee was operating a standup forklift and moving a pallet of product. The employee jumped off the forklift as it veered toward a pallet racking system. The employee's foot was crushed between the forklift and the rack guard protection.,1
"An employee was walking on top of mold tools, staged between molding machines, in order to stage a hoisted mold tool in the same area. The employee slipped off the top of a mold tool and fell approximately four feet to the concrete floor. The employee was hospitalized for contusions to the head and torso.",1
"On February 29, 2020, an employee was on an elevated platform to perform routine cleaning activities and fell through an open access hatch in the floor of the platform. The employee fell onto a metal grate and sustained fractures to both arms and a rib requiring hospitalization.",1
An employee was carrying hot water in a pitcher in the kitchen. The pitcher overflowed onto her right hand causing second degree burns.,1
"While hooking up a pump trailer to the hitch on a truck, an employee's finger was caught between the hitch ball on the truck and the coupler on the trailer. The employee sustained a crushing injury/fracture to the left middle finger that required surgical amputation.",0
An employee was replacing a baggage conveyor system clutch and checking the drive belt when the employee's glove was caught and their left hand was pulled into the machine's pulley resulting in a partial amputation of the index finger.,1
An employee was working on plastic display racks in the garden center. The employee was standing on a table attempting to pull a leg out of one of the racks when the table became unstable and the employee fell to the concrete floor. The employee fractured a hip.,1
"On March 1, 2020, at approximately 5:40 a.m., the injured employee was catering a flight with employees 2 and 3. While the catering box on the lift truck was elevated, employees 2 and 3 were closing the aircraft's door and heard a noise. They observed the injured employee on the ground below. It is believed that the injured employee was inside the catering box while it was raised to service the aircraft and fell out after the box's door was opened. The injured employee sustained a skull fracture.",1
An employee lost balance while operating an electric pallet jack. The employee fell from the pallet jack and their left foot was caught between the pallet jack and a pallet. The employee was hospitalized with an open fracture of the left big toe.,1
"An employee was mopping a floor. When he went to get a caution sign, he slipped and fell to the floor, breaking and dislocating his elbow.",1
"An employee was producing a run of product on a machine when it jammed. While clearing the jam, the employee's middle finger and either the ring or index finger on his left hand were amputated.",0
"Two driver employees were riding a lift gate from the ground to the trailer's edge. As they were traveling up, one employee reached down to lift up the trailer's roll up door. While reaching for the trailer's door, the employee's left foot got caught between the lift gate and the back of the trailer. Three toes on the employee's left foot were broken and the employee was hospitalized.",1
The injured employee was going through a doorway on the roof to re-enter the building when he missed the step into the facility and fell down the step. He was hospitalized with a broken right hip.,1
"An employee was using a torch to cut back-to-backs from 12-inch channel iron. His hose got caught; as he tried to free it, the torch slid down his hand into his glove. It caused second- and third-degree burns to the palm and hand.",1
"An employee had just stepped off the back of a truck when the truck backed up. Its tire ran over the employee's foot, breaking it.",1
An employee was feeding raw product into an extruding machine when their hand was caught in a roller. The employee sustained a partial de-gloving injury.,1
"An employee was in a truck lane after sealing a truck. A truck backed up and pinned the employee against the building, crushing the employee's legs.",1
"An employee was applying sealer on roofing paper. The employee stepped backward and fell through a skylight opening, landing about 18 feet below and suffering a cerebral hemorrhage, broken bones, and a lacerated liver and spleen.",1
An employee suffered a partial amputation to the ring fingertip while working on a butterfly valve actuator.,1
"An employee working on a barge slipped and fell, sustaining a pulled hamstring.",1
"The injured employee was on an aerial lift, conducting an orientation of a steam valve. Upon completion of the job, the injured employee came down from the lift. He went to remove his lock from the lockbox, and struggled with getting the lock off. Another employee noticed the injured employee's hands were shaking, his breathing was labored, and he seemed confused. The injured employee was hospitalized with heat exhaustion.",1
An employee was trying to direct milking heifers into milking stalls. The employee was pushing one of the heifers into the stall when she jerked her head up and caught the employee's finger against an overhead guardrail. The finger was amputated.,0
"An employee was pushing a stand of drill pipe to its stowed position. While pushing the drill pipe, he slipped and fell forward. He placed his right hand on the deck to catch his fall. The stand of drill pipe swung back towards the injured employee as the driller was lowering the top drive to catch the stand, before it swung across the mast. The stand of drill pipe was then set down on the injured employee's right hand, amputating his ring finger.",0
"An employee was setting up an oven's outfeed plates. The rake initiated and struck the employee, causing second-degree burns to the employee's back.",1
An employee was operating the groove side end matcher machine when the rotating saw blade contacted the employee's fingers resulting in partial amputation of the left thumb and index finger.,0
"An employee slipped in liquid and fell down the stairs. He sustained injuries to the left side of his body, including internal injury.",1
"An employee was on a pathway, walking toward a building, when she slipped on ice and fell to the ground. She suffered a broken right leg.",1
"On March 2, 2020, an employee was helping winch a treetop to a wood chipper when the winch rope lacerated the employee's right hand. The employee's right index, middle, and ring fingers were medically amputated.",1
"Two employees were trying to pull a cow out of a ditch. After they got the cow out, one employee's horse got scared and started bucking. The employee fell from the horse and the rope became tangled around his neck, causing face and neck injuries.",1
An employee fell down a flight of stairs and sustained a head injury.,1
"Employees were preparing a pig receiver and pig launcher. The block valves had been closed, and the receiver and launcher had been blown down; liquids were draining from the opening of the launcher. A forklift was being used to open the receiver hatch. The hatch struck the forklift's forks, and liquids at the receiver and launcher ignited. An employee suffered second-degree burns to the face and right hand, as well as first-degree burns to the left and right lower legs, and was hospitalized.",1
"An employee was helping align a press, to be used in welding beams. His right hand was amputated between the ram and the shoe of the die.",1
"An employee was moving a UPS cabinet off a pallet using a pallet jack. The pallet buckled and tipped toward the employee, bending his right hand back. He suffered two broken bones in the hand and was hospitalized, requiring surgery.",1
An employee was on a forklift when its rear wheel amputated half of his left foot.,0
"An employee was operating a powered industrial truck by remote. The truck activated and ran over his leg, breaking it.",1
An employee was greasing a trailer at a loading dock. A forklift entered the trailer causing the trailer to bounce and the height locking mechanism to disengage. The trailer frame then came down on the axel and the employee's left middle finger was caught and crushed between the axel and frame. The injury led to an amputation.,1
"An employee was placing wood skids, setting a cradle for 36-inch steel pipe while the operator turned it to set it in place. A skid fell and smashed the employee's right hand against a piece of pipe. The employee's thumb was partially amputated.",1
"While moving a table, an employee's finger was caught between the framework of the table and an adjacent table. The finger was amputated to the first knuckle.",0
"On March 2, 2020 at 10:43 PM, an employee was preparing to close the lobby service area of the restaurant when a robber shot the employee in the back, causing injury to the back, torso, and lung.",1
"A truck driver had stopped to adjust the loose tarpaulin over the load of dirt in the dump truck. While climbing down after adjusting the tarpaulin, he fell to the ground breaking two ribs on the left side.",1
"While working in the backroom, an employee's foot/feet got tangled in plastic wrap that was on a pallet. This caused her to fall and strike both the floor and a wooden pallet. The employee was hospitalized with a fracture below the knee.",1
"An employee was waiting for a mechanic to gather tools needed to reeve a hoist cable through a single-sheave rope block. The block fell over, pushing the employee forward and causing him to fall. The block then landed on his left ankle/leg, breaking the ankle and the tibia.",1
"An employee was cutting a small narrow piece of wood with a table saw and using a push stick. After finishing the necessary cut, the employee reached to shut the machine off. While reaching for the stop button, the employee's hand entered the vicinity of the blade before it had come to a complete stop. Three fingertips came in contact with the blade, resulting in fingertip amputations.",0
An employee was cutting metal on a shear. His hand slipped and the shear amputated four of his fingers.,0
"An employee was on break in the break room. The employee put her foot up onto a chair, to tie her shoe, while she was standing. When the employee lifted her head back up, from tying her shoe, she passed-out, fell backward, and hit her head. The employee sustained a hematoma on the back of her head and was hospitalized.",1
"At 1:30 p.m. on March 3, 2020, an employee was lining up separate pieces of lumber to be spliced together on a splicer machine. The machine tripped, and the employee's left hand was caught between the piece of lumber and the machine's metal rollers. The thumb, index finger, and middle finger were broken.",1
"An employee was using a radial arm saw to cut wood 2 x 4s. The saw kicked back and the employee's finger contacted the blade, resulting in an amputation of the left index finger to the third knuckle.",0
"An employee was receiving a pig from the pipeline, when the pig exploded through the cover. The employee sustained a fractured hand and a concussion.",1
A mechanic was investigating a possible hydraulic leak on the lift gate of a semi-trailer. A hydraulic line on the lift gate released pressurized hydraulic fluid which lacerated the mechanic's right middle finger and fluid was injected into the finger.,1
"Two employees were fixing and troubleshooting a machine. One of them was on a ladder on top of a belt that needed to be replaced, 3.5 feet high. The machine was activated and the belt moved the ladder, causing the employee to fall to the ground and injure his lower right leg.",1
An employee had finished securing a load on a flatbed trailer when the employee lost balance and fell to the ground below. The employee's left arm was dislocated at the elbow.,1
"An employee was tying in a newly installed, de-energized domestic water line by brazing a 3-inch copper coupling in a shallow excavated area with a gas brazing rod. A natural gas explosion burned the employee.",1
"An employee was operating a cable-cutting machine. As she was realigning a cable, the machine actuated and amputated the tip of her right thumb.",0
"An employee was leaving a client's facility when she tripped over a curb and fell to the ground, breaking her knee. She was hospitalized.",1
"An employee was priming the seal water pumps for a paper machine. The employee removed a cap and was struck by discharging hot water, suffering first- and second-degree burns to the arms and back. The employee was hospitalized.",1
"While walking to her car at the end of the day an employee's left foot slipped off the sidewalk and landed in the parking lot, causing her to lose balance and fall face first onto the sidewalk. The employee sustained a broken nose, facial fracture, concussion, and contusions.",1
An employee suffered a back injury while restacking pallets in a freezer.,1
An employee was judging a polo match and was struck by a horse. The employee was hospitalized with a broken leg and a dislocated shoulder.,1
"An employee was cleaning a truck in the rain. As the employee began to step down on the passenger side of the truck, she fell. Her back struck the ground. She suffered a closed head injury, a lumbar strain, a thoracic strain, and pain in both ankles.",1
An employee was cutting plywood with a table saw and amputated his left thumb. His left index finger suffered a partial amputation.,1
An employee was operating a border wire (clinching) gun when his finger was caught between the wire and the gun. The tip of his finger was amputated.,0
An employee was removing container deck shoes while containers were being discharged. He walked to the side of the hatch lid to get out of the swing radius of the crane. The employee then turned and stepped off the hatch lid. He fell and sustained a closed skull fracture.,1
"Employees were laying down an 8"" drill collar from the catwalk using the main rig hoist. During this, the injured employee was placing a 3x6 wooden board under the collar. When the collar came in contact with the board, it caused the end of the board to rise up, partially degloving the employee's left shin that required a skin graft.",1
"An employee was using a hoist to move a wall into place so it could be screwed down. While moving the wall into place, it bumped into an existing wall and was displaced from the hoist, falling onto the employee. The employee sustained a neck fracture.",1
An employee was speaking on the phone at the nurses station when a patient attacked the employee by striking her in the face and neck. The employee was hospitalized with cervical and neck injuries.,1
"An employee was servicing a car. A cover, placed under the car, slid when the employee stepped on it. The employee fell to the floor and suffered a dislocated right shoulder.",1
"The operator of the up-cut saw pressed the lever to lock down the guard and start the saw cycle. As the guard was lowered an employee, who was responsible for take-off, reached to adjust the wood that was being cut. The blade contacted his right thumb, amputating the tip.",0
"An employee was operating a re-saw. While the employee was repositioning the ""stop"" on the saw, his foot contacted the saw blade. He sustained a laceration to a toe and tendon requiring surgery. The machine was running at the time.",1
"A security guard was walking through a kiln when he stepped into a hole filled with hot water. He suffered second-degree burns to the right leg, from the foot to just under the knee.",1
"An employee was placing a B-arm on a pole and was using an impact wrench. The impact wrench loosened the bolt and the arm fell, pinching the employee's index finger between the arm and the pole resulting in amputation of the fingertip.",0
An employee was entering the cab of a forklift. While shutting the door the employee's left middle finger was pinched between the door and the door jam resulting in a partial amputation.,0
"At about 9:30 a.m. on March 3, 2020, an employee was using a winch on a disposal truck to move a dumpster. The employee's arm was caught in the winch cable between the dumpster and the truck, and was severed just above the wrist. The employee was hospitalized.",1
An employee sustained back pain due to riding in a truck bed.,1
"Employees were placing front tongue load-bearing metal poles into metal stand boots. A metal pole weight slipped, and an employee's right thumb was caught between the pole base and the boot rim. It was amputated at the first joint. The employee was hospitalized and the thumb was surgically reattached.",1
"An employee was retrieving a pallet of baked goods. The pallet in front of that one fell, striking the employee in the head and leg as he was exiting the fork truck. The employee was hospitalized and had surgery for the injured leg.",1
"Air was being reintroduced to a dry pipe fire suppression system as part of an inspection. The air supply pipe burst. The pipe struck an employee standing outside the room, about 3 feet from the door. It cut his head, causing an injury that required hospitalized and stitches.",1
"An employee was standing next to a dumpster. A hopper was being moved, and the employee's little finger was caught between the hopper and the dumpster. The fingertip was amputated.",0
An employee was removing metal from a wall while standing on the log deck. He lost his footing and fell through a gap between the log deck and the transfer deck and landed on the basement floor. He sustained a closed head injury and a lumbar disc herniation.,1
"While closing the door of the recovery boiler personnel elevator, an employee's right hand was caught in the closing door and three metacarpal bones were fractured.",1
"An employee was changing a water filter for heated processed water. When the employee opened the filter, water splashed onto the inside portion of their upper right arm, causing a second degree burn.",1
"The injured employee was supervising another employee who was cutting grooves into a piece of pipe. When the injured employee reached to grab a pipe, his right hand was caught in the roll groover machine and two fingers were amputated.",1
An employee suffered second-degree burns while conducting an arc flash study. The employee was hospitalized.,1
An excavator was being used to turn a wrench to remove nuts on a crusher. The wrench came loose and hit an employee in the head. The employee suffered a welt and knot on his forehead and a swollen right eye.,1
"An employee was loading a single, push-around manlift onto the lift-gate of a stake-body truck. The lift became unstable. While the employee attempted to stabilize it, he slipped and fell sustaining a severe laceration on his left shin.",1
"On March 4, 2020, a lineman was transferring #6 copper wire from an old pole to a new pole while on an aerial lift (30 feet above the ground). He was using a MAC (used as a temporary jumper wire) when a live #6 copper wire at the other end of the MAC touched his left thigh and right elbow, which completed the circuit, causing contact burns to his left thigh and right elbow. The employee was hospitalized.",1
"While walking into the building an employee tripped and fell on the floor, fracturing their hip.",1
An employee was operating a bagging machine. The employee stopped the bagger and was inspecting the side sealer when the sealer cycled. The knife came down and amputated his right middle fingertip.,0
"An employee was disassembling an MRI medical table when it fell onto his hand, breaking it.",1
An employee was cutting a piece of aluminum in the band saw when his left hand slipped and his left middle finger was partially amputated by the saw blade.,0
"A cashier was getting a pizza for a customer. She tripped on a rubber mat and fell, breaking her hip. She was hospitalized and underwent surgery.",1
"An employee had been inspecting an HVAC unit on the roof of a building. He then climbed down the first section of a fixed ladder from the roof and was standing on a metal platform before climbing down the second section of the ladder. He fell through the opening in the platform where the second section of the ladder starts, and landed on the ladder's base, which is a raised metal platform. He sustained fractures to the left arm and right ankle.",1
"A sanitation employee was cleaning a dough cruncher/roller machine when two fingers on his right hand were amputated between the nail and knuckle. At the time of the incident, the blade was not in the machine, but the machine was running.",1
"An employee was dumping a dump hopper. The hopper came back down and struck the employee's left little finger, resulting in an amputation.",0
"A mail carrier was delivering mail to a residence. While running from a barking dog, the mail carrier fell and struck their head against the wheel of a customer's car. The mail carrier sustained fractures to an eye socket, the right shoulder, and left elbow.",1
An employee was dismantling shoring when a beam fell on him and broke his right leg.,1
"A battery on a pallet fell onto an employee's leg, breaking the tibia and causing a chemical burn.",1
An employee had an allergic reaction to an antibiotic and was hospitalized.,1
An employee's right middle finger was pinched between two grates in a piece of equipment. The fingertip was amputated.,0
"An employee slipped and fell about 10 feet off of a residential roof, landing on frozen ground. The employee's right heel was fractured.",1
An employee was working on an individual folder machine. The employee slipped and their hand contacted a gear resulting in amputation of the right index fingertip.,1
The injured employee was talking to another employee while kneeling on the mud pan. The injured employee's right foot/leg were caught between the mud pan and the catwalk resulting in a fracture to the right leg. The machine was in operation at the time.,1
An employee had an allergic reaction to shrimp that someone was eating nearby and was hospitalized.,1
An employee tripped and fell over a curb while participating in a fire drill. The employee struck the ground and suffered a broken right knee and right-side contusions.,1
"An employee was working on an excavator bucket, he tripped over a pry bar and fell to the floor, breaking and dislocating his left wrist. He was hospitalized.",1
An employee passed out while sitting in a meeting. He was hospitalized with altitude sickness and dehydration.,1
An employee was backing up a motorized pallet jack. The employee started to step off the pallet jack while it was still moving backwards and her right leg was pinned between the pallet jack and a floor scale. The employee sustained two broken bones in the lower right leg.,1
"An employee was observing a changeover of a rolling mill. The carriage moved and pinched the employee's right hand, amputating the middle finger above the tip.",0
An employee was closing the gate to the pipe storage area (bullpen) and caught a finger between the gate stop and the gate resulting in a partial amputation.,0
A temporary employee was cutting wood on a table saw. The wood kicked up and the blade amputated the employee's left middle finger.,1
"An employee removed the tarp from a load on her truck, suffered a heart attack, and was hospitalized.",1
"After recharging the furnace, there was an explosion inside the furnace. An employee was hit by a hot piece of scrap metal that flew out of the furnace while he was using the lance. The scrap metal struck the employee in the left shoulder near the arm pit.",1
"On March 4, 2020, an employee was using a table saw when he noticed that the dust collecting vacuum appeared to be clogged. He was reaching to tap the hose/vacuum when his hand hit the moving blade, severely lacerating two fingers.",0
"To repair a pump, an employee removed a grate from a 2-foot deep pit containing hot water which drains from a corrugated machine. The employee lost his balance and his left leg entered the water up to the calf. The employee was hospitalized with a second degree burn.",1
An employee was removing a mold from press. The employee's finger was pinched between the accordion mold and the stop block. The finger was partially amputated.,0
An employee was operating a kick shear and amputated their left index and middle fingers.,0
"As an employee was walking to his work station, he saw two boards misaligned on the green trimmer conveyor belt. When he reached to align the boards his left pinky finger was jammed between the conveyor belt wall and the boards. His left pinky fingertip was surgically amputated.",0
An employee fell from a dumpster and sustained severe head injuries.,1
"While walking around the exterior of the building, an employee stepped in mud and sustained a broken ankle.",1
"Employee 1 was using a front-end loader inside a concrete storage bin to scoop up a boulder of burnt soybeans that had clumped together. Employee 1 could not scoop the boulder into the front-end loader's bucket. The confined space attendant and a supervisor went into the storage bin to assist the front-end loader in scooping the boulder into its bucket. Another soybean boulder, weighing approximately 100 pounds, fell down and hit the attendant and the supervisor and they both sustained fractures to the pelvis. One employee was hospitalized.",1
"An employee was getting out of their vehicle on their mail route, slipped in slush, and fell to the ground breaking the left ankle.",1
"An employee fell down the stairs from an office trailer, landing on the ground and breaking his leg in two places. He was hospitalized.",1
An employee was operating a stand-up forklift when it was struck by another stand-up forklift at an intersection inside the facility. The employee was hospitalized with a broken leg.,1
"An employee was cutting steaks with a bandsaw, The sawblade amputated his right index fingertip.",0
Employees were trying to move a roadside traffic arrow sign onto a lowboy trailer. One employee's finger was pinched between the sign's hitch and the trailer frame. The employee sustained a partial amputation to the left middle fingertip.,0
"The injured employee was assisting another employee with removing a pin from a mini-excavator. When the pin came out, it struck the injured employee's left hand causing a fractured wrist and a tendon/ligament injury. The employee was hospitalized and required surgery.",1
An employee slipped and fell in a staff bathroom. Her left shoulder struck the wall between the table and the toilet and was broken.,1
"An employee had been connecting cables between a load bank and a transformer (neither were connected to an energy source). After that he began to roll out and position cables to connect the transformer to an electrical switchboard. While positioning cables at the rear of the switchboard in preparation for making the final connections, he contacted an energized buss bar. The employee sustained first degree burns on both arms, with second degree burns on his forearms and hands. He also sustained first and second degree burns on the left side of his chest. Additionally, he sustained two exit wounds on his left leg, one on the knee and the other just above the knee.",1
An employee was loading up a stall with a crane on an exterior crane to a building. The employee's left pinky finger was caught between pieces of steel; the pinky finger was broken and tendons were lacerated on the pinky and ring fingers. The employee was hospitalized for surgery.,1
"A cowboy was walking his horse out of the horse barn to start the day. When he climbed on his horse it started to buck and he fell to the ground. He sustained fractured ribs and vertebrae, and a punctured lung.",1
An employee was walking down a stairwell en route to her office. The employee miss-stepped and fell down the flight of stairs to the stair landing. The employee was hospitalized with a fractured left ankle.,1
"An employee was filling cylinders with pressurized nitrogen. A piece of metal came loose, lacerating and breaking the employee's arm.",1
An employee was exiting the back of the delivery truck after he finished a delivery. He missed a step and fell 38 inches to the ground resulting in a fractured right patella.,1
"On March 5, 2020, an employee was using a handheld grinder to grind on metal. The grinding wheel severely lacerated the employee's leg.",1
A forklift pushed a metal vat against a bollard while an employee had their hand on the vat. The employee's left middle finger was smashed between the vat and the bollard and the fingertip was amputated.,0
"An employee slipped on a bubble of linoleum in the floor and fell, injuring his back.",1
An employee was cutting product from a carcass. The knife lacerated the employee's inner right thigh; the employee was hospitalized.,1
"While using an order picker machine, an employee fell 12-15 feet to the concrete floor. He was hospitalized with a broken back, ruptured spleen, and multiple rib fractures.",1
"On 3/5/2020, a custodian was cleaning a toilet. The employee placed bleach in the toilet and then added a germicidal bowl cleanser chemical to the toilet. A chemical reaction occurred and the employee had an asthma attack. The employee was hospitalized.",1
"On March 5, 2020, an employee was using a pressure washer to clean a scrubber. When the washer was activated, the wand jumped away from the hose and lacerated his left hand with water (pressurized at 3,500 psi). He was hospitalized.",1
"An employee was in a bucket truck's bucket. The upper boom caught between branches; while the booms were being moved, a branch broke, causing the upper boom to spring side to side. The employee fell out of the bucket and was caught by his full-body harness after falling 2 feet. He suffered a broken hip and was hospitalized, undergoing surgery.",1
"An employee was performing an operations check on a recently assembled rifle. A component of the rifle was missing, allowing the rifle's bolt to be ejected, lacerating the employee's face and imbedding into their shoulder.",1
An employee was threading a production line with plastic. The employee's head was caught and injured between two rollers.,1
"An employee was walking around a unit of corrugate, tripped on dunnage, and fell to the ground. The employee sustained a fractured femur.",1
"An employee was cutting metal with a torch. Metal splattered onto his right leg, burning the inside calf area.",1
An employee of Collins Aerospace and an employee with another company were working on the back rest of an aircraft seat. The Collins Aerospace employee suffered an amputation of a right-hand fingertip between the first knuckle and the nailbed.,0
"An employee was pulling a strip of rubber out of a rubber warming mill. The rubber broke, causing her to fall backwards to the floor and suffer multiple broken bones in her left arm and wrist.",1
An employee was operating a standup forklift and was making a right hand turn into an aisle. The employee's leg hit a guardrail and the employee sustained a sore foot. The employee later had surgery to amputate the big toe and the tip of the second toe.,0
An employee was putting a brass bushing in a ring bearing for a beam. A forklift was lowering the beam while the employee was manually adjusting the position of the bushing. The injured employee's left ring finger was crushed by the beam resulting in surgical amputation.,0
"An employee was pouring gasoline into a vehicle carburetor. The gasoline ignited and burned the employee's right arm and hand, right-side chest and neck, and left arm.",1
An employee was using a sledgehammer to straighten out a piece of metal on a vehicle when a piece of metal broke off and hit him in the eye.,1
"A service technician was installing rental equipment attachments. As he was inserting a retaining ring, the equipment attachment fell and his left index finger was caught and lacerated between the ground and the attachment. He was hospitalized and had surgery on his left index finger.",1
"An employee was visually inspecting the calciner (furnace) tube. When the employee removed the manifold for the calciner tube, tungsten (product) and nitrogen and/or hydrogen caused an explosion inside the calciner tube. Flames shot out of the end of the tube and burned the employee's face and right forearm.",1
An employee was working on a garbage truck. The employee disconnected the hydraulics and the arms of the truck came down and trapped the employee. The employee was hospitalized with a broken pelvis.,1
A temporary employee was using a sandblaster to prepare steel product for painting. The employee lost control of the sandblaster and sandblasting material struck the employee's face and eyes. The employee sustained abrasions to the left side of the face (cheek and forehead).,1
An employee was loading a trailer using a forklift. The truck moved forward and the forklift fell to the ground. The employee suffered a cut or pinch to the right thumb/palm.,1
"While returning to his parked vehicle after delivering a package to a residential address, an employee was attacked by three dogs. The employee sustained multiple bites and scratches to the hands, arms, and legs and was hospitalized.",1
"An employee was unloading ductwork from a truck to a skip pan. The employee slipped and fell through a 2- to 3-foot gap between the truck and the pan, landing on the ground 3 feet 8 inches below. The employee hit the side of the truck while falling, suffering five broken right-side ribs (one of which punctured the lung).",1
"An employee tripped on a rack's leg and fell, suffering a glass cut to the right hand.",1
"An employee was greasing equipment while standing on a conveyor belt. When the equipment was powered on, the employee fell from the conveyor and struck his head and right hand. The employee sustained injuries to his right hand.",1
An employee was pressing bus parts using a 90-ton press. The machine actuated and amputated the tips of eight of the employee's fingers.,1
"On March 6, 2020, an electrician in a mechanical room was disconnecting wires that feed to the fire alarm pump, to replace it. The power company arrived to perform the power shutdown and told the electrician that he could flip the breaker. Afterwards, he disconnected the wiring and the breaker arc flashed, causing second and third degree burns to his face and hands. He was hospitalized.",1
An employee was operating an extruder. His right hand was caught in a running nip point in the machine while removing waste material from the die and the little fingertip was amputated.,1
"An employee was transferring sulfuric acid from a railcar to a cargo tank trailer. When the railcar was empty, the employee removed the product transfer hose. While removing the valve fitting, sulfuric acid (in the form of a mist) sprayed out and contacted the employee's face and upper torso. The employee was hospitalized for chemical burns.",1
"While running conduit, an employee fell partially through a ceiling. The employee suffered broken ribs and a punctured lung, and was hospitalized.",1
"An employee was conducting a measurement setup on a parabolic eye forming apparatus. During the setup process, the forming assembly cycled and the employee's left index finger was crushed between the forming assembly and the die block. The employee sustained a laceration and fracture to the left index finger that resulted in medical amputation of the fingertip.",0
"An employee tripped and fell while walking down stairs, landing on the floor and suffering a broken right tibia and head pain.",1
An employee was in a trailer moving around freight. He was unstrapping and moving a skid when a skid fell and struck his back. The employee was hospitalized with a back injury.,1
"An employee was traversing south in a walkway, entering a T-intersection in the mechanical components department. A forklift that was hauling a hopper full of scrap metal came from the right and turned left into the intersection. The hopper struck the employee on the left side knocking the employee to the ground. The employee sustained a right forearm contusion, two or three fractured ribs on the left side, a fracture of the left upper femoral head, a fractured vertebra, and a concussion.",1
An employee was walking and tripped over a cable that was attached to a chair. The employee was hospitalized with a broken hip.,1
"On 3/6/2020, an employee was unloading a tractor trailer at a convenience store. While walking up the tractor trailer ramp, he struck his head on the tractor trailer door and fell off the loading ramp. The employee sustained a fractured pelvis and was hospitalized.",1
"A front loader operator was salvaging parts of a car. As he was loosening the bolt on a spring assembly, his hand struck against the interior of the car's wheel well, injuring his left ring finger. The fingertip was surgically amputated.",0
"While working a wedding event, an employee was walking down the stairs, misstepped on the first stair, and fell down the stairs. The employee sustained a broken elbow.",1
"Automated carts/wagons moved and struck an employee's left leg, lacerating the upper thigh.",1
"An employee was transporting a pallet containing two paper rolls (weighing about 900-1,000 pounds each) using a standup rider pallet jack. The pallet jack collided with another pallet, causing the rolls to shift. One struck his leg, breaking it.",1
"An employee was operating a CNC lathe when an article of their clothing made contact with a bolt on the chuck. The employee was pulled into the moving chuck and sustained a broken wrist, a broken jaw, and a cut on the neck.",1
An employee was spraying the ceiling of a parking lot while on a rolling scaffold. The employee turned to spray and fell 6 feet from the scaffold to the concrete below. The employee was hospitalized with a subdural hematoma and facial fractures.,1
"A temporary employee utilized an overhead crane to move a concrete panel from one area to another. The panel started moving towards a post. The employee put his hand on the concrete panel to stop it before hitting the post, but his left hand was caught between the panel and the post.  The employee sustained a crushing injury to the left hand and was hospitalized for surgery.",1
A terrain park employee broke his tibia and fibula after landing wrong while skiing.,1
An employee was walking at the job site when he tripped over some material and sustained a broken leg.,1
"An employee was pushing a steel mud bucket inside a tunnel work area. The bucket was loaded with pieces of lumber and C-shaped steel beam rings. A piece of the steel caught the edge of the tunnel wall, moved back, and caught the employee's right index finger against the upper edge of the bucket. The employee suffered an amputation to the finger.",0
"On March 7, 2020, an employee went to talk to a co-worker in a back office which is near a stock room/merchandise processing area. In that area, cardboard boxes are broken down and flattened so they can be removed from the area. Afterwards, she walked to the merchandise processing area, slipped on a cardboard box, and fell to the floor. She was hospitalized with a sprained knee and fractures to her left femur and hip.",1
"An employee was cutting up scrap metal. There was a hole at the connection in the hose of the hand torch which caused the employee's shirt to become saturated with oxygen. When the employee lit the torch, his shirt caught on fire. The employee was hospitalized with burns on his stomach, right arm, and back.",1
An employee was breaking down storage racks when their right pinky finger was struck by a long-handled sledgehammer. The finger was smashed between the rack and the hammer and required a partial amputation at the hospital.,0
"An employee was assisting with patients in the emergency department. The employee became faint, weak, and lethargic in part due to exhaustion, then began having seizures. The employee was hospitalized for surgery.",1
An employee was stringing a machine when his finger was caught. The fingertip was broken resulting in a partial amputation.,0
An employee was struck by a forklift while walking toward a break room. The employee suffered fractures and was hospitalized.,1
"A boom lift ran over an employee's right foot, causing a fracture of the first metatarsal and a laceration of the foot.",1
"An employee had just finished unloading a pallet of product. The employee picked up the empty wood pallet to place it on top of the stack of empties and got a splinter in their right hand. The next day, the employee was hospitalized due to an infection in the hand.",1
"An employee was working on skis, removing a fence. The employee fell down onto the trail and suffered a broken hip/pelvis.",1
The injured employee had been taking the orders of drive-through customers. The injured employee was then involved in an altercation with fellow employees and sustained a broken eye socket.,1
"An employee was placing cartons on packaging equipment. The employee tripped on a pallet leveler corner base and fell, suffering a broken hip.",1
"An employee had climbed on a desk to change a clock on the wall. The employee became light-headed and fell to the floor, hitting his head and sustaining a contusion.",1
"The cast deck crew were performing a ladle exchange, which involves the ladle turret being rotated from north to south to exchange the empty ladle with a full ladle. The crew were changing the ladle shroud during the ladle exchange. The crew removed the spent shroud from the empty ladle and turret rotation was then initiated to exchange the empty ladle. The crew was placing a new shroud onto the shrouding device, when an employee’s foot was caught between the shrouding device and the access stairway on the north tundish car. The injured employee was hospitalized with a crushing injury to the left foot.",1
"An employee was walking through the deli backroom area when her sneaker caught on the trim around a floor drain causing her to fall forward and strike a wall several feet away. The employee sustained a fracture to her left humerus, a laceration to her left knee requiring 6 stitches, and a contusion to the left wrist. The employee required surgery.",1
"Two employees were working on a feed line. They had shut the power off to the feed auger and were clearing a rock from it. Once the rock was pried free, the auger swung back to its normal position and amputated one employee's right index fingertip, also lacerating the employee's right middle and ring fingers.",0
"An employee was operating a cash register when a cord caught her foot and she fell. She was hospitalized, undergoing surgery for her broken leg.",1
An employee reached into an ingoing nip point and suffered a fractured finger.,1
"An employee was operating a yard hostler or yard dog. While making a turn on the dock, the hostler rolled over and the glass in the cab shattered. The employee sustained lacerations to the arm.",1
An employee was on an A-frame ladder trimming a tree with loppers. The employee lost his balance and fell onto his left hand fracturing the wrist.,1
An employee was operating a forklift when it struck a large planter and rolled onto its side. The employee was hospitalized with a fractured left ankle.,1
"On March 9, 2020, an employee was trying to remove a tool die from a thermoforming machine when his left index fingertip was caught between the machine's handle and its shaft. The fingertip was amputated.",0
An employee was trying to remove built-up margarine that was clogging a machine. The machine caught her glove and amputated the tip of her finger.,0
An employee was waiting for glass to come down the conveyor/roller system when their fingers were caught in the system. The left ring finger was de-gloved and the left middle finger was amputated at the second knuckle.,0
"An employee fell while beginning to climb down a 24-foot ladder, landing on a concrete pad and suffering a broken right ankle.",1
An employee was using a pocket knife to remove a headlight switch from a truck. The knife cut his left thumb.,1
"On March 9, 2020, an employee was walking in the parking lot at the hospital, going into work. The employee was struck on the side by a vehicle which caused her to fall and hit the ground forcibly, resulting in a fracture to the L3 vertebra.",1
"An employee was using a pry bar to help align a front end loader and its pin so he could guide the pin back into place. The pry bar slipped, causing an amputation (not affecting bone) to the employee's right index finger.",0
An employee was about 18 feet up on a ladder at a job site when the ladder slid and the employee fell hitting his head. The employee was hospitalized with a concussion.,1
"An employee was operating an extruder machine. While aligning a plastic string inside the cutter, the employee's fingertip was amputated.",1
"An employee was function testing the wench line for leaks, slipped on the oil rig floor, and fell onto a sheave, amputating two fingers on his left hand. The sheave was partially guarded at the time.",1
"During a commercial dive, an employee suffered an injury that resulted in an amputation to a left-hand finger.",1
An employee was operating a machine. The employee's arm was caught and fractured in a nip point between a roller and the product.,1
"Inside a dumpster, bleach and washer fluid had mixed, resulting in chloroform gas being generated and entering the building. An employee scheduling patients for medical services was overcome by the gas. The employee was hospitalized with lung and gastrointestinal illnesses.",1
"An employee fell off a scaffold while sanding drywall. The employee suffered a broken, leg, arm, and finger.",1
An employee was walking with a pallet jack to pick up a set of pallets. The handle of the pallet jack jerked to the right and the pallet jack pinned the employee's right foot against a barrier. The employee sustained fractures to the right foot.,1
An employee was operating a stand-up forklift in a warehouse when his foot/ankle were caught and crushed between the forklift and a guardrail. The employee was hospitalized with presumed fractures of the foot and/or ankle.,1
An employee was working on a cord crimper and amputated the right forefinger.,1
"An employee was setting up a horizontal band saw. The saw's hydraulic vises caught the employee's fingers, causing amputations to three fingers on his left hand.",0
An employee was using a deli slicer when its blade partially amputated her left index finger.,1
An employee was tightening bolts inside an electrical cabinet. An arc flash caused first-degree burns to the employee's face.,1
An employee was hanging sheet rock in an elevator shaft and fell. The employee had back pain.,1
"An employee was spotting for a powered industrial vehicle operator who was loading a large toolbox onto a truck. The toolbox slipped and the employee tried to catch it, resulting in a broken leg and arm gash.",1
"A well service floor hand was connecting pipe to a power swivel. The employee's left thumb was caught and crushed between the tubing elevators and a lifting cable. The employee was hospitalized, undergoing a surgical amputation to the thumb.",1
The injured employee was assisting another associate in working on a bumper winch. The injured employee's hand was on the bumper when someone under the truck called the employee's name. The injured employee looked under the truck and the eyelet on the bumper winch caught their thumb. The employee sustained a partial amputation to the right thumb.,0
"An employee took off his hard hat, struck another employee in the face with it (breaking his nose in two places), and beat the second employee",1
"An employee was removing a tire, rim, and wheel assembly from a tractor. The wheel hit the ground, causing the chain to come undone and the tire to fall on him. He suffered broken vertebrae and a broken pelvis and was hospitalized.",1
"After crushing boxes inside a dumpster, an employee was climbing out of the dumpster when something caught his trousers and caused him to fall. He landed against the metal edge of a nearby compactor table and suffered three broken ribs.",1
An employee was cleaning the deli slicing room conveyor belt (the belt after the slicer) when the belt caught his glove and pulled his hand into the roller of the drive shaft. His left middle finger was amputated.,0
"An employee was using a meat saw. The saw cut the employee's finger to the bone and the employee was hospitalized, undergoing a surgical amputation to the finger.",1
An employee was using a table saw to cut plastic when the blade amputated the left middle and ring fingers.,0
"On March 10, 2020, an employee was forming retainer parts on a 90-ton brake press. The press dropped onto the first three fingers of his right hand, crushing them. He was hospitalized.",1
"An employee was riding in the back of a trailer with signs and barricades. The barricades fell over. As the employee tried to stop them from falling, he fell from the moving trailer onto the highway. The employee sustained bruises and contusions.",1
"An employee was carrying lab supplies through a lab. The employee tripped over a table leg and fell, suffering a hip injury.",1
"An employee was feeding bar stock into a bar straightener. The employee's apron became wrapped on the spinning bar; as the employee tried to free the apron, his left hand was caught between the bar and the machine guard. The tip of his little finger was amputated and the middle and ring fingers were broken.",0
While walking down stairs an employee fell and injured her ankle. The employee may have also hit her head.,1
"The injured employee was cutting tree branches with other employees, when a tree branch fell and struck the injured employee in the head. The employee sustained a bruised head and a possible concussion.",1
"An employee was doing cornice work from a 20-foot scaffold. He fell from the scaffold to the ground, landing on his face and shoulder and suffering broken bones. He was hospitalized.",1
An employee was rewinding a roll on a spool at the rewind station. The employee's hand was caught in the roll to the rewind machine and the employee sustained multiple arm fractures.,1
"The injured employee was collecting produced water from a well site when he observed a person collapse. The injured employee attempted to render aid to the person, when he succumbed to hydrogen sulfide (H2S). The injured employee was hospitalized for H2S exposure.",1
An employee was loading parts on a nut welding machine when an electrode came down on the welding machine and smashed the employee's thumb. The left thumb was amputated.,0
"While clearing wood from a under a chipper machine, an employee's right hand was caught in the chain and sprocket, resulting in amputation of the thumb and index fingers and lacerations to the right hand, forearm, shoulder, chest, and the back of the head.",1
An employee was exposed to hydrogen sulfide and was hospitalized for an inhalation injury.,1
An employee sustained a severe laceration to the forearm when a channel iron came forward from a machine and struck the employee.,1
An employee was dismounting a pallet jack when his ankle got caught between the jack and a yellow barrier pole. The employee was hospitalized and required surgery.,1
An employee was using an overhead crane to move a rack upright. The 200-pound rack fell from the crane and crushed the employee's left foot.,1
A plumber was installing a concrete anchor using a drill. His glove got caught in the drill and part of his finger was removed. The finger was amputated at the hospital.,0
"An employee was operating a roll threader machine to manufacture a metal bolt. The employee picked up a piece of material and positioned it into the threader dies to thread. He closed the dies with the foot pedal and used his left hand to help balance the material. When the material began to spin, his glove was caught and his left arm was twisted and broken.",1
"An employee was behind a truck, preparing to dump one of two pallets of lumber from the truck's dump body (which had been raised so the lumber could be unloaded). The other pallet slid off the truck and struck the employee's lower leg, breaking it.",1
"An employee was retrieving something from a postal car when she slipped and fell to the ground, breaking her left ankle.",1
An employee sustained burns to the abdomen while cleaning a crock pot.,1
"An employee was operating the crosscut machine, which uses table extensions for cutting larger rugs. To unfold a table, the employee pushed in the left bracket and then went to push in the right bracket. When he pushed in the bracket that is underneath the table, the extension came down, catching his fingertip between the middle and right table extensions. This resulted in a partial amputation and a fracture to the fingertip.",1
An employee was reinserting a die in a punch press when his middle finger was caught in a keyway. The 28-pound die amputated his fingertip.,0
An employee was blasting a steel structure using black beauty/coal slag as the blast media. The employee lost control of the hose and blasting device and was struck in the upper right arm by the blast media sustaining a laceration and penetration of the skin.,1
"A mechanic was working on a pump truck's belt drive radiator fan system. His left little finger was caught between the timing belt and a pulley, and the fingertip was amputated.",0
An employee was clearing product from a conveyor belt and contacted a band saw blade resulting in a deep laceration to the left middle finger.,1
"On March 10, 2020, an employee was working on an alligator shear when it activated and lacerated the employee's left middle and ring fingers.",1
"While cleaning a dining room, an employee tripped on a customer's foot, fell to the floor, and suffered a bruised wrist and dizziness.",1
"An employee had placed a skid between the blades of a skid steer and a concrete drain box to prevent damage. As the skid steer applied pressure to move the concrete box, the employee's finger was crushed between the skid and the concrete box, resulting in a partial amputation to the index finger.",0
"An employee was monitoring a welding heat prep operation for a large drum shell that was braced for support. The drum expanded during heating, and the brace failed and struck the employee, who fell to the concrete floor. The employee suffered a head injury requiring stitches and hospitalization.",1
The injured employee was using a drum lifter to move 55-gallon drums. A drum became dislodged and another employee was helping to lift it manually. The 55-gallon drum then fell off the drum lifter and amputated the injured employee's left thumb tip.,1
"The employee was punching small parts on the hydraulic punch press when a part got stuck. As she tried to pull the small part out of the punch press, the punch activated, smashing the end of her finger. The fingertip was amputated to just behind the fingernail.",0
"An employee was pulling a battery cart carrying 40 cells. The cart struck a parked cart and the employee's right ring finger was pinched between the two, causing the amputation of the fingertip at the first joint.",0
An employee was removing something from the rollers of the glue machine when their right hand was caught in the rotating rollers and the right thumb was crushed. The thumb was amputated to the first knuckle.,1
"An employee was operating a resistance welder. The employee placed a ring band on the lower electrode. She then placed a closure handle on the top of the band. Once the welding process was initiated, the employee reached for the next band to process with her left hand, and reached for the ring she was currently welding with her right hand. The machine had not completed the clamping process and her right index finger was caught between the upper electrode and the ring. The fingertip was amputated.",1
An employee had been removing formwork to set up for a different job and was struck by the concrete formwork and sustained a broken pelvis requiring hospitalization.,1
"An employee working as a tower operator was performing a task that requires the blending of compounds used to fabricate plastic. While operating the regrind machine, the employee's left middle finger was partially amputated.",0
"An employee was backing away from a cash register when she tripped on another employee's foot and fell, breaking her femur. She was hospitalized.",1
An employee was repairing a garage door opener while standing on an adjustable A-frame ladder. A cable snapped and the employee fell to ground. The employee suffered a fractured wrist and leg.,1
"While picking up traffic cones, an employee was struck by a vehicle mirror. The employee was hospitalized.",1
An employee was operating an upcut saw and contacted the blade with their left hand resulting in amputation of the left thumb and a hand injury.,0
"An employee tripped and fell backwards into a concrete catch basin, landing about 7 feet below and suffering broken ribs and a concussion.",1
"An employee rolled her ankle while walking, felling and sustained fractures to the lower tibia and fibula near the ankle joint.",1
An employee was trying to clear a jam in a line so that flour would feed from a hopper. The employee's right middle finger was caught between a chain and a hook; the first digit of the right middle finger was amputated.,0
"An employee was on a metal, fixed ladder. He was opening the roof hatch to go onto the roof when he fell about 12-14 feet to the floor, hitting a sink faucet and the ladder on the way down. The employee was hospitalized with multiple rib fractures on the left side, a fractured scapula, and a bruised lung.",1
"An employee was pushing a bird cart guiding it into a walkway. While entering the walkway, the employee's finger was caught between the cart and a stationary metal rail. The employee sustained amputation of the pinky fingertip.",0
An employee fell from a ladder and suffered a broken leg.,1
"An employee was entering a building when the door closed on his left hand, crushing the fingers.",1
"Earlier in the day the injured employee was visiting a client and had tripped on the curb, injuring his shoulder. A few hours later while at the office, he began to feel ill. The employee passed out and landed on the floor in an awkward position resulting in a fractured left foot and a dislocated left ankle. The employee was hospitalized.",1
An employee was putting a valve assembly back together when their right pinky finger was pinched and amputated in the valve assembly.,0
"An employee was removing and repairing a hydraulic lift cylinder on a piece of equipment. The employee loosened a connection and pressurized hydraulic fluid burst out, hitting the employee's hand. Hydraulic fluid penetrated into the skin tissue and muscle of the thumb on the palm side of the hand.",1
"An employee was loading a plastic applicator machine. A roller caught the employee's clothing and pulled the employee's left wrist into the applicator, where it was crushed and broken.",1
An employee was accessing the vane feeder to clean it out. The employee removed the cover and proceeded to clean out the vane feeder with his right hand. The employee's right index finger was caught in the machine resulting in an amputation down to the first knuckle. The machine was in operation at the time.,0
"An employee was visually inspecting a faulty part for the cuber carrier. The employee had stepped out of the basket into the frame when the cuber carrier moved, causing him to lose balance and fall 12 to 13 feet onto a slat conveyor. The employee sustained fractures to the left wrist and left hip. Fall protection was not worn at the time of the incident.",1
"An employee was using a blower to blow leaves off a planter. He fell off the planter to the ground 3 feet below, suffering a laceration to the back of the head. He was hospitalized.",1
An employee was clearing a jam in the cutter blades of a jelly machine. The blades amputated the employee's ring and middle fingertips.,0
A brick mason was using a drill to mix mortar when the drill's cord wrapped around their left ring finger causing a laceration that required hospitalization.,1
"An employee was snowboarding from one lift area to the next to relieve another ski lift operator. The employee struck a tree, suffering a broken femur.",1
"An employee was changing a valve while working from a ladder. The ladder slipped and the employee fell with the ladder to the concrete floor, sustaining a head injury.",1
"At about 11:30 p.m. on March 11, 2020, an employee was setting up a drawbench machine to pull aluminum wire. The employee's right ring finger was caught between the wire and the capstan wheel, and the fingertip was amputated.",0
An employee was tipping plastic recyclable materials from a rolling cart into a dumpster when their right middle finger was caught between the cart and the dumpster. The distal end of the finger was amputated.,0
An employee assisting in hydro-excavation operations sustained injuries to the left foot from a pressure washer being operated by another employee. The injured employee sustained lacerations on the left foot a few inches above the ankle and between the little toe and the fourth toe.,1
"An employee slipped on ice while walking to her car and fell, suffering a knee injury. She was hospitalized.",1
"At about 12:20 a.m. on March 11, 2020, an employee was trying to adjust a stack of sheet metal when the stack fell. The employee's left ring finger was pinched between the sheet metal and a pallet, and the fingertip was amputated.",0
An employee was unjamming the bottom plate of a cardboard baler. The bottom plate popped up and pinched the employee's right index finger against the baler frame. The fingertip was amputated.,0
An employee's left hand was caught in a sprocket as the employee checked a chain. The employee suffered possible finger amputations.,1
"After finishing orientation and safety training, an employee went out in the yard to learn how to clean and assemble molds. While building a mold, the mold header dropped onto the employee's right ring finger resulting in amputation of the last 3/4-inch of the finger.",0
A forklift operator's foot contacted a steel upright shelf. The operator suffered a broken ankle and was hospitalized.,1
"An employee was hooking up a trailer to the back of a tractor. The employee's ring finger was pinched between the hitch and the trailer, suffering a soft tissue amputation to the fingertip. The fingertip was sutured.",1
"An employee tripped and fell, and was hospitalized.",1
"While operating a bandsaw, an employee suffered an avulsion to the tip of his right thumb.",1
"An employee was struck by a motor vehicle in a construction zone, suffering a broken clavicle, ribs, and pelvis.",1
An employee was using a staple gun to secure cardboard to a shipping crate. The gun shot a 3/4-inch staple into his knee.,1
"An employee tripped and fell in a store, suffering a knee injury. She was hospitalized.",1
An employee had been tearing down 2000-pound corrugated blocks of sugar. A chunk of sugar sloughed off the block and struck the employee in the back of the left leg. The employee sustained a fractured left tibia and fibula.,1
"An employee was stepping from a sidewalk to a parking lot when she turned her left ankle and fell to the pavement, suffering a broken left ankle.",1
"An employee got out of his forklift and it moved forward, running over his foot and causing a compound fracture. He was hospitalized.",1
"On March 12, 2020, an employee was getting on a parked forklift and was struck by another forklift resulting in a broken left ankle and foot.",1
"An employee was strapping down a load on a tractor trailer when he fell off the trailer, landing on the pavement and suffering a broken hip.",1
"An employee was using a hammer to remove parts when it smashed his finger, causing the amputation of the fingertip.",0
An employee was loading pails of adhesive into the bucket of a utility loader when their left middle finger was pinched between a 15-gallon pail and the bucket and amputated.,0
"The injured employee was standing at the end of the dock waiting for a pallet to be set on the ground and then be loaded into a delivery truck. The pallet was set on the ground and as the forklift driver was removing the forks, the pallet tipped over and struck the injured employee. The injured employee sustained a fractured right hip and a rib fracture.",1
"An employee was operating a crane that was lifting a mold with a turnover system. Another employee was operating the turnover system. The first employee was holding the hook to align the mold while the hydraulic lock on the hook was cycled. When the lock was cycled, the employee's left middle finger was pinched and partially amputated.",0
An employee was attaching oriented strand board (OSB) sheathing to exterior wall paneling using a staple bridge machine and was caught in the in-feed chain resulting in partial amputation of the distal part of the right middle finger.,0
The injured employee was assisting another employee with fueling a push boat when fumes/vapors in the area were ignited by a spark from the battery post. The injured employee sustained flash burns.,1
An employee was walking in the hallway in the lab. The employee tripped on a co-worker's foot and fell to the floor sustaining a fractured left hip.,1
An employee's left pinky finger was caught and amputated while using a tire machine to remove a tire from a rim.,0
An employee was standing on stored materials to take a measurement of materials on a storage rack. The employee slipped and fell backwards approximately 2 feet. The employee was hospitalized with a broken back and bruised legs and ankles.,1
"An employee became dizzy while oiling a fifth wheel, fell, and injured his back. He was hospitalized.",1
"While entering his tractor trailer on the driver's side, an employee felt a pop in his lower back. He did not slip or fall. After driving for one hour, the driver's seat came out of locked position and he sustained pain in the lower back.",1
"An employee was assembling a meat grinder. While pushing a screw into the housing, the employee's right index finder got caught between the housing and the screw. The employee was hospitalized with a hand injury.",1
"On March 12, 2020, an employee was trying to remove part of a broken power transmission line from the distribution line it had fallen on. An electrical flash burned the employee's stomach and wrist.",1
"An employee was retrieving a window from a trash box attached to an aerial lift. When setting the window, the trash box tipped over and the employee fell 17 feet. The employee sustained a compression fracture to the spine.",1
"An employee was cutting a ductile-iron pipe using a gas-powered handheld chop saw. The saw bound up, kicked back, and cut the employee on the right side of the chest.",1
"The injured employee was overseeing that the rod connections were going well. A work crew was coming out of the well with 1.5-inch, fiberglass rods and double stands. They had just made the connection. An approximately 60-foot fiberglass rod unscrewed from the holding, slipped out of the transfer, fell out of the barrack, and hit the rig floor. It then bounced off the rig floor onto the ground and struck the injured employee on the left side of the head, knocking him unconscious.",1
"An employee was removing overhead wood framing from a soffit. His foot slipped and he fell, breaking his right femur against a concrete flower planter.",1
"Am employee was installing metal decking on the roof of a steel building. While going backwards, the employee fell approximately 19 feet off the roof and fractured an arm.",1
"An employee was climbing a ladder to leave an excavation. A strap broke from the ladder and the employee fell to the ground at the bottom of the excavation, suffering a broken leg.",1
"An employee was on a step ladder, troubleshooting an issue with a conveyor, when he lost his balance and made contact with the conveyor belt and pulley. The employee's left little finger was amputated.",0
"An employee was cleaning on the third-floor mezzanine when they fell through an access hatch and landed on the second-floor mezzanine. The employee sustained a broken collar bone, a broken rib, a possibly broken vertebra, and a brain hematoma.",1
An employee was performing an inspection of the inside of a pipe near a solenoid valve. The valve actuated while his left hand was inside the pipe resulting in a partial amputation of the index and middle fingers.,1
An employee suffered a partial amputation of his left middle finger while cleaning a dicer machine.,1
"An employee was helping install a gearbox on a machine. The gearbox slipped off the lift and caught the employee's right hand against the machine. The hand was lacerated, the middle finger was broken, and the little finger was dislocated.",1
An employee was troubleshooting and performing service and/or maintenance on equipment when an actuator valve engaged and caught the employee's finger. The left index finger was amputated. The equipment was not locked out/tagged out at the time.,0
"An employee was feeding tubes into a draw machine. The employee's left ring and middle fingers were pinched between two tubes, and a fingertip was crushed and amputated.",0
"An employee was checking for a seam under a suspended pipe. The sling holding the pipe shifted and the pipe lowered onto his right index finger, crushing the tip. The fingertip was amputated past the nail.",0
"An employee was locking all the doors and securing the building after their shift. The employee tripped over a dock plate and fell to the ground, landing on their left elbow. The employee sustained a compound fracture of the left arm.",1
"On March 13, 2020, an employee was overcome by gasoline motor fumes while spray-painting inside a home being built. The employee was hospitalized.",1
"An employee was changing the die on a mechanical punch press. The die came down on employee's hands and fingers, amputating the left middle finger, index finger, and half of the thumb and crushing the right index and middle fingers.",1
"While taking garbage to a dumpster, an employee slipped on ice in the parking lot and fell on their leg fracturing it.",1
"An employee was troubleshooting an R-22 refrigeration system. When the employee went to disconnect a connector from a valve, the connector did not fully disengage from the valve, causing the valve to be halfway open. R-22 refrigerant escaped. The employee was hospitalized with second degree chemical burns and frostbite to the top of both hands.",1
An employee was cutting turkey on a meat slicer. The blade partially amputated the employee's left middle finger.,0
"At 4:30 p.m. on March 11, 2020, an employee was moving plastic-wrapped pallets. The employee tripped over plastic wrap and fell to the concrete floor, suffering a broken hip.",1
An employee was cleaning an idle roller of a card press. The employee was removing some material when the press tore a tendon in the employee's left index finger.,1
A passing school bus tire grabbed an employee's leg which was then torn open and degloved.,1
"A truck driver was on the ground, directing a loader as it unloaded his truck. His right hand was caught between the trailer and the loader, amputating the ring and little fingers. He was hospitalized, undergoing surgery.",1
An employee was moving a bundle of rebar off a pallet. His right little fingertip was pinched and sustained an amputation.,0
"An employee was helping move a bundle of metal tubes. A couple of the tubes came loose and fell onto the employee, pinning him against another bundle and breaking his right shin.",1
"An employee was using a wheel balancing machine. While reaching for a tool, his finger was struck by the wheel balancing machine. His right index finger was amputated to the first knuckle.",0
"An employee was pouring a corrosive cleaning chemical when it splashed in his eyes and onto his neck and shoulder. The bucket containing the chemical then fell, splashing his right leg as well. He suffered chemical burns to the eyes, neck, shoulder, and leg.",1
An employee was positioning an oilfield drill bit when it fell from the connection fixture it was connected onto. The bit fell onto the employee's left ring fingertip and crushed it against the work surface. The fingertip was medically amputated.,1
"An employee slipped on a roof and fell to the ground, suffering a broken hip and wrists.",1
"An employee was backing a forklift through an aisle when it struck another forklift. The employee suffered a loss of consciousness, then pain and weakness in the upper extremities.",1
An employee was tying off a fish pump with a rope. The employee's thumb was caught in the rope and partially amputated.,0
An employee was checking a customer's car when the engine belt amputated the employee's middle finger.,1
An employee was waxing metal slides so that lumber would slide over them better. The employee's left hand was crushed between two pieces of metal as they came together.,1
"An employee was standing on a 5-gallon bucket when it slipped out from under her. She fell to the concrete floor, suffering wrist fractures.",1
"An employee was using a manual pipe dolly to move a pipe fabrication into a building for installation. He was guiding the pipe along the path when his right thumb was pinched between the pipe fabrication and an existing support, resulting in a partial transphalangeal amputation of the right thumb.",0
"An employee climbed a 6-foot ladder to cut a tree branch. While cutting the tree branch with an electric saw, the employee lost balance and fell off the ladder sideways, landing on the left side of his back. The employee sustained fractures to the left wrist, ribs, and pelvis.",1
"An employee slipped in water in a vestibule, suffering a dislocation of the left knee and a broken leg.",1
An employee was loading hose into a hose machine. The employee's left middle and ring fingertips were caught in the machine. The fingertips were medically amputated.,0
An employee was performing maintenance on a saw when the blade amputated his right middle finger.,1
"An employee was cleaning wood dust from a molder after running the machine. The blades snagged the tips of his gloves, pulling his right hand under the guard and into the splitting head. The employee suffered amputations to the ring and little fingers above the knuckle.",1
"While actuating a control valve, an employee was struck by a jet stream of hot water from a nearby hose. The employee sustained first and second degree burns.",1
"An employee tripped over a pallet strap and fell to the concrete floor, suffering a broken left femur.",1
An employee was backing up a pallet jack when his right foot was caught between the jack and the wall. The foot sustained a dislocation and fracture.,1
"An employee was bitten by a client's cat on the finger. The wound became infected, requiring hospitalization.",1
An employee had an asthma attack while operating a two-saw edger.,1
"An 8-ton tugger (a pneumatic winch with cables and pulleys) and snatch block were being used to move a coil pack into position. An employee was monitoring the cable and pulleys. The employee's right hand was caught between the cable and the channel of the block, causing amputations to the right index, middle, ring, and little fingers and a non-displaced fracture to the right little finger.",1
An employee was helping to unload a truck when three boxes fell and struck him in the head. He was hospitalized.,1
An employee was cleaning a meat slicer. She lowered the slicing basket and went to scrub the upside face of the blade using a sanitized cloth. She extended her hand further out and her right ring finger ran across the blade resulting in amputation of the fingertip.,1
An employee was walking into work from their car to begin their shift. The employee slipped on ice and fell on the pavement. The employee was hospitalized with a broken right hip.,1
"An employee was lifting bay doors when they came loose. He fell backwards and hit his head on the concrete ground, suffering a concussion.",1
An employee was repairing a fuel pole stanchion when his finger was caught between the clamp and the steel pole. The employee sustained a fingertip amputation.,1
"An employee was operating a reach forklift in an aisle that had been blocked off with a safety barrier. A customer went under the safety barrier and walked in front of the forklift to grab a case of mayonnaise. The employee tried to step off the forklift, but his shirt got stuck on the drive handle. The forklift then accelerated into steel pallet racking and the employee was pinned between the rack and the forklift. The employee sustained a fractured pelvis.",1
An associate was stabbed while trying to save customers from a person with a knife. He was stabbed in the leg and suffered hand injuries that required surgery.,1
"An employee was traveling upward on an aerial lift inside a tank. The lift stalled at a height of about 57 feet, then fell. The employee fell with the basket to the floor of the tank, breaking both feet and both ankles and suffering lacerations and five broken vertebrae.",1
"An employee was holding a hose during the filling of a storage tank. A valve blew apart and the hose backlashed, striking the employee on the left side of the face. The employee sustained a broken jaw and facial lacerations. The employee was hospitalized.",1
"An employee was working inside a gondola rail car, rigging bundles of steel rebar for hoisting out of the car. During a partial breakout lift (hoisting about 2 feet to gain access for slinging), a nylon strap parted under the 1,100-2,200-pound load, which fell back into the car and struck the employee. The employee suffered a broken femur and collarbone.",1
"An employee fell while climbing a rack, landing on a pallet about 4 feet below and suffering a broken and dislocated left hip.",1
An employee was sandblasting a cap aluminum dye assembly. He stood the part up to turn it onto the other side. The part then tipped over and amputated his left middle fingertip.,0
"On March 14, 2020, an employee was injured while apprehending a potential shoplifter. The employee was hospitalized for a broken leg.",1
"While walking to a laundry cart, an employee stubbed their toe on the floor, tripped and fell, suffering a broken right femur and left shoulder.",1
An employee had been pulling brick from a conveyor. The employee's finger was caught in the conveyor plates and was amputated.,1
"While an employee was cutting plywood using a table saw, the plywood bound up on the saw. When the wood suddenly became free, the employee's left hand contacted the saw blade. The employee sustained a partial amputation of the left index finger.",0
"An employee was ascending a fiberglass extension ladder to check a customer's electrical connections. He was approximately 6 feet off the ground when the ladder slipped off of the house, causing the employee to fall and hit his elbow on the ground. The employee was hospitalized with a fractured right elbow.",1
An employee was using a table saw when his right thumb tip was amputated at the first knuckle. The employee was hospitalized and underwent surgery. The table saw was unguarded at the time.,1
"An employee was attempting to take the vitals of an inmate. The inmate jumped out of a wheelchair and assaulted the employee. The employee sustained multiple contusions to the right-side ribs, a fractured nose, two black eyes, a puncture wound to the right side of the back of the head, pain in the right arm and neck, pain/bruising to the lower left leg, and a blood blister on the lower lip.",1
An employee was entering the cab of a semi-truck when he slipped from the handle and step of the truck. The employee fell backwards and struck his head on the ground. He was unconscious for a few seconds and was bleeding from the nose and ears.,1
An employee sat a package down and his knee buckled. The employee was hospitalized.,1
An employee was lowering an object into a pulverizer when his fingers were caught in a come-a-long chain. His left index finger was amputated at the hospital and the left middle finger was pinned and sutured.,1
"An employee was moving bison heifers into a pen. The group of bison turned around and ran towards the employee, knocking him down and stepping on him. The employee sustained an abrasion on his armpit.",1
"While operating a powered industrial truck (PIT), an employee's arm got caught between the cage and a door. The employee sustained a broken arm.",1
"An employee was working on a flatbed semi-trailer that could extend its length. The air cylinder to release the pinning device was not working properly, and he manually released it. When the truck pulled forward, the employee was caught between two pieces of steel. He suffered broken ribs and punctured lungs.",1
An employee was adjusting a flexographic press. The press amputated the employee's right middle fingertip.,1
"An employee was working the third shift, either mopping or running the cash register, when the employee was shot in the leg by an active shooter.",1
"An employee tripped and fell into a mobile material handling cart, breaking his left arm.",1
"An employee was putting fiberglass into the wrapper stacker machine. The employee was correcting fiberglass that was going in crooked, when his hand was pulled into the rollers of the machine. The right ring finger had to be amputated.",0
"An employee fell from the top of a tandem trailer while unloading trash at a landfill. The employee sustained lacerations to the head, a dislocated shoulder, and a concussion.",1
An employee was installing metal decking on the second floor of a building when he fell through an opening and landed on the ground floor. The employee sustained multiple fractures of the upper extremities.,1
While moving a dust vacuum an employee tripped over the vacuum's cord and fell 3.5 feet. The employee sustained pain in their back and shoulder.,1
"An employee was operating a loom when the mechanical chain drive seized. The employee tried loosening bolts to the mechanism to free the chain drive, but that did not work. The employee then tried to manually manipulate the chain drive mechanism resulting in amputation of the right thumb tip.",1
"An employee was under a sawmill, investigating an issue with the dust chain. The drag chain caught his left foot and entangled him against a chain hold-down arm. He suffered a broken bone, a broken big toe, and a small laceration to the right foot.",1
An employee was operating a press when her fingers were caught in the rollers. Her left index and middle fingertips were amputated.,1
An employee fell in a parking lot after stepping on a small animal. He sustained a back injury and was hospitalized.,1
"An employee was using a 4-foot mobile staircase to retrieve a part from an inventory rack. The employee missed the bottom step while descending the staircase and fell to the ground, fracturing a hip.",1
"An employee was transferring finished product (cured concrete) from a staging area. As he moved a piece of wood cribbing, his left hand was pinched between the concrete and the cribbing. He was hospitalized for a hand injury.",1
"An employee was walking through a shipping area. A forklift backed into the employee, severely lacerating the employee's right leg.",1
"An employee was riding in the back of a cow trailer. The back door of the trailer opened and the employee fell out, hitting his head on the concrete drive. He suffered brain bleeding.",1
"An employee was closing a door from the batch plant office. A gust of wind blew the door shut, catching his left thumb in the doorframe and resulting in amputation of the thumb tip.",0
An employee was dragging an empty pallet when she slipped and fell. The pallet landed on her. Her left leg was broken below the hip.,1
An employee working as a deckhand was securing ropes on a barge when he was struck under the knee by the rope. He was hospitalized with a fractured right leg.,1
"An employee was operating an aerial lift and was elevated 9.5 feet. While traveling backwards, he was pinned between the cage of the aerial lift and overhead structure bracing. The employee's chest/neck area was pinned, cutting off oxygen and resulting in strangulation.",1
An employee walking on an 8-foot high walkway of creel rack fell through the gate on the walkway and landed on the concrete floor. The employee sustained a fractured right hip.,1
"An employee was checking a metal disk used for metal detection in food. The metal disk fell. When the employee reached up beneath the conveyor for the disk, their glove got stuck in the conveyor which caused a laceration to the middle of the employee's right hand. The employee required surgery.",1
An employee was carrying a conveyor part to a pallet and fell on the floor. The conveyor part landed on the employee's leg and broke it.,1
"While moving 55-gallon drums from one pallet to a storage pallet, a barrel slipped and an employee's hand was caught between two barrels, amputating part of the right middle finger.",0
"An employee was operating a tomato slicer when she contacted the blade with her cut glove, resulting in a left thumb tip amputation.",0
An employee was operating a die set machine when their left hand was caught between the machine and the die set resulting in a partial amputation to the pinky finger.,1
"An employee was cutting a piece of metal. The employee's right middle finger was caught between the metal and a machine, and the top of the finger was amputated.",0
An employee pushing a copier machine slipped and fell. The employee sustained a spine injury.,1
"An employee was pouring caustic into a kettle with hot water to sanitize the kettle. A chemical reaction occurred, causing caustic to splash back onto him. The employee sustained chemical burns to parts of the face, the eye, and also to the wrists, neck, thigh, and buttocks.",1
An employee was working on replacing an 8-inch compact light and suffered an electric shock. The employee was hospitalized.,1
"A forklift's mast struck the top of a doorway and two of the wall panels it was carrying fell onto an employee. It struck the top left side of his head, causing a laceration and neck pain.",1
An employee was operating a pipe bender when their fingers were caught and crushed. The fingers were later medically amputated.,0
"While preparing to mop the area an employee stepped over a case of water bottles, tripped, and fell to the ground resulting in fractures to the left wrist and hip.",1
An employee was using a table saw. The employee's hand slipped and contacted the running blade; the employee suffered an amputation to a finger.,1
An employee was using a man-up forklift to pick an order from the warehouse racking and fell 17-18 feet to the floor. The employee was hospitalized with spine and skull fractures.,1
An employee was unloading a rebar delivery at a new home construction site using a forklift. The forklift tipped forward and the employee was thrown off the forklift. The employee sustained a fractured vertebra and lacerations to the head.,1
"An employee was preparing to raise a steel frame using an overhead crane and chain sling. The tip of the crane hook was being used to raise the frame. After the frame was raised 6-12 inches from the floor, the employee went to position the chain and the frame fell onto his left hand. He sustained amputations to the middle, ring, and pinky fingers and was hospitalized.",1
"While framing the inside of a structure, an employee fell approximately 12 feet through a floor opening and suffered head trauma.",1
An employee was cleaning wood chips off a machine when the plates of the machine amputated her left index fingertip.,0
"An employee was driving a forklift with a hopper attached to the forks. The hopper was full of metal chips. The employee then parked the forklift, released the hopper's dump mechanism, and dumped the hopper's contents into a large receptacle. As the employee moved the hopper back into the upright position, his left hand was caught at the point where the hopper latches into the upright position and the hopper crushed his left middle finger. The finger was amputated from the first knuckle.",0
"A temporary employee fell through a manhole at a demolition site, landing 14 feet below and suffering a severe head injury and broken ribs.",1
An employee was guiding a suspended conveyor belt by hand as its tension was adjusted. The employee's right-hand fingertips were caught between a plate and the adjustment nuts on the conveyor. The ring and little fingers were partially amputated.,1
"An employee uploaded water into a tank at a man camp. After uploading the water, he was reversing the pump to clear out the line. As he pulled the pin from the plunger bar his finger was caught between the plunger nut and the valve. The fifth digit on his left hand was amputated.",1
"While descending a ladder, an employee fell from the third or fourth rung to the concrete floor, suffering a broken right leg.",1
"An employee was aligning/installing the bottom punch in a forging press. An airline was hooked up to extend cylinders for the die pod. The airline became disconnected and the die pod fell, pinching the employee's left index finger between the die and the punch. The finger was amputated to the second knuckle.",0
"An employee was on an extension ladder, clearing a bottle jam in an overhead conveyor. The employee fell off the ladder to the floor about 12 feet below, suffering a head injury.",1
An employee was carrying a tray with parts soaking in it when the employee slipped and fell on the concrete floor. The employee was hospitalized with a fractured hip that required surgery.,1
"An employee was working on the paper machine winder. While moving a large roll of paper on the cradle, the employee's right index finger was caught and amputated between two rolls of paper.",1
An employee tripped and fell face first in the shop. She was hospitalized with a possible back injury.,1
"An employee was inspecting and writing down the serial number of a casing adapter tool in the yard. The employee rolled the tool over and the tool proceeded to roll over again, striking and amputating the employee's right index finger.",0
"An employee was transferring material contained in a forklift's hopper attachment to the trash. When the hopper was released, it rotated forward and pinched the employee's left hand between a forklift tine and the attachment tube resulting in amputation of the pinky finger.",0
"An employee was breaking loose a bundle of sheet metal parts. The bundle had been placed on a wood pallet on a table. The whole bundle of sheet metal parts slipped off the table, falling to the ground and landing on the employee's right foot. The employee sustained fractures to four toes.",1
"An employee was trying to load a bar straightener machine. The employee's arm was pulled into the machine, where it was broken and lacerated.",1
An employee tripped and fell to the floor. Her right femur was broken at the hip and she was hospitalized.,1
An employee was spooling new cable into an air winch. His right middle finger was caught between the cable and the spool body and was partially amputated.,0
An employee was performing auto repair work when his finger was pinched and fractured in a hydraulic jack. The employee was hospitalized.,1
"An employee placed an 8-foot piece of louver material onto a non-automatic saw bed and was attempting to cut the louver when her left thumb and forefinger contacted the blade, receiving amputations.",0
"An employee was operating a press brake. The press brake came down on the employee's left hand, crushing three fingers.",1
An employee was repositioning an elevated steel beam on a lifting device that was about 6 inches off the ground. The employee was hitting the steel beam with a hammer when the beam slipped off the lifting device and crushed the toes on the employee's right foot.,1
An employee was pulling a dolly (holding a fireproof cabinet weighing about 500-600 pounds) while two other employees pushed it. The employee slipped on the wet ground and fell; his leg landed between the ground and the dolly and was broken.,1
"An employee was closing the rear door of a truck. His left ring finger was pinched in the door handle, and the tip was amputated.",0
"An employee was unjamming a conveyor when her left index finger was caught in a ""dog flap"" on the conveyor. The fingertip was amputated.",0
"An employee was driving an order picker, moving a pallet of wire to be put away. While he was backing the order picker into position to offload the pallet, his left index finger was pinched between an overhead pipe and the overhead guard. His fingertip was lacerated and part of it was amputated.",1
"An employee was working from an elevated pallet on a forklift when he fell 6 feet to the ground, striking his head. He was hospitalized with a head injury.",1
An employee was doing abrasive blasting from an 8-foot step ladder. He fell from the ladder and blasting medium was injected into his armpit. He was hospitalized.,1
An employee was walking down a hallway. She fell to the floor and broke her right arm.,1
An employee got cut in the stomach while operating a blade machine.,1
"An employee was repairing a broken yard end. While he was untying yarn ends to remove a yarn wrap from a 4-inch feed roller, the roller cycled, pinching the tip of his right thumb between a 2-inch tension roller and the 4-inch feed roller. He suffered an amputation to the thumb.",0
"Two employees were picking up palletized product that had fallen and was leaning against the wall. When one employee pulled a pallet loose, the pallet and product fell onto the second employee. The injured employee had fractures to the right collarbone and knee, as well as bruising to the right knee. The injured employee was hospitalized.",1
An employee slipped due to icy conditions in the parking lot and suffered a left hip injury.,1
"A cleaning technician was cleaning a tank trailer that contained residual sodium bisulfide. As he was cleaning the tank trailer with hot steam, he began to experience shortness of breath.",1
"An employee was performing taping work, tripped over plumbing that was coming out of the floor and fell. The employee sustained a broken right leg.",1
An employee had been unloading cheese from a blender. The employee was holding two buttons used to control the cheese blender paddles/manually jog the equipment. The employee let go of the buttons and went to grab a piece of cheese that was stuck in the blender. There was a 4-second delay after letting go of the buttons before the paddles completely stopped moving. The employee's hand contacted the still moving paddles. The employee sustained an amputation to the corner of the left pinky fingertip and a laceration on the pad of the left pinky finger.,0
An employee was exiting the receiving area and tripped and fell to the floor while stepping over product that was on a partially empty pallet. The employee sustained a broken hip.,1
An employee was being trained to operate a saw machine. The employee was guiding pieces of wood from the chain deck conveyor into the saw. The employee's fingertip got caught between the wood being pushed and the chain conveyor's guard. When the employee felt his fingertip get pinched he pulled his hand out. His left pinky fingertip was fractured and a portion of the fingertip was pulled off.,0
An equipment operator was reaching to move a paver into a conveyor system when a robotic arm struck him. His left thumb was broken and lacerated and he was hospitalized.,1
An employee jumped to the ground from the third rung of a ladder and broke their lower right leg.,1
"An employee was operating a brake press machine and amputated their right middle, ring, and pinky fingertips.",1
An employee was leaving a room when the door shut on her right middle finger and latched. She suffered a fracture and an amputation to the fingertip.,0
An employee sustained a partial finger amputation while operating a punch press.,1
An employee was feeding sheet metal into a rolling machine when his glove got struck on a burr on the sheet metal and his left hand was drawn into the roller. The employee sustained the amputation of his left ring finger.,0
"A Davey employee was in a coned work zone. A vehicle ran through the cones and struck the employee, causing fractures to the right lower leg and eye socket, bleeding in the skull, and a neck injury.",1
"While painting the hull of a ship, a painter fell to the ground from a scaffold. He was hospitalized with lacerations to his arm, a skull fracture, lumbar fracture, and a pulmonary contusion.",1
An employee was installing the third chute to dispense cement from the cement truck. The employee lost balance and grabbed the chute. The second chute then came down and pinched his fingers between the two chutes resulting in amputation of the left index and middle fingertips.,0
"An employee was conducting maintenance on equipment when the cover started to slide and caught the employee's right index finger, resulting in an amputation.",0
"An employee was removing a load bar from the back of a trailer. The truck pulled forward and the employee fell to the ground, suffering a broken left femur and right wrist.",1
An employee was cleaning out a hose that was used during concrete pouring. He was pulling out the slack and pulled the trigger on the pressure washer. Water shot out of the pressure washer and punctured his left ring finger.,1
"An employee was loading sawblades onto a cart for cleaning. A 24-inch blade fell and struck the employee's left foot, lacerating it.",1
An employee was coupling railcars near the melt shop. The employee's right foot was crushed between railcar couplers and toes were amputated by the steel toe of their boot. The employee was hospitalized and their leg was medically amputated from the knee down.,1
"An employee was working from a 15-foot-high scissor lift, replacing lightbulbs along a ceiling. An overhead crane struck the scissor lift, causing it to tip over. Its basket fell onto a table on the floor, then ejected the employee; the employee suffered a broken elbow, a possibly broken arm, a broken collarbone, and a head injury.",1
An employee was troubleshooting a candy machine when their left middle fingertip was amputated by the rotary valve blades.,1
An employee was cutting plastic when his right thumb came into contact with the blade of a floor-mounted vertical bandsaw. The thumb tip was amputated.,0
An employee was walking to the sink to wash his hands when he slipped and fell on the floor. He was hospitalized with injuries to his lower back and hip.,1
"An employee was ripping 3/4-inch strips of wood using a table saw when his hand contacted the blade, resulting in an amputation his left middle and pointer fingertips.",1
"Two maintenance employees were disconnecting utility lines to remove a large oven. The injured employee was lying on his right side applying a valve lock device beneath the oven when his coworker cut the compressed air line, releasing the residual air pressure and allowing the door to glide down and pin the employee to the floor. The employee was hospitalized with rib compression fractures.",1
An employee was scrubbing the framework of a conveyor belt. The belt had been removed. The sprockets on the running shaft snagged the employee's jacket and pulled his arm between the framework and the shaft. The employee suffered lacerations and other injuries to the lower left arm and was hospitalized.,1
"While an employee was scrubbing the framework of a conveyor, their rain jacket was snagged by the sprockets on a running shaft. The employee's left arm was pulled between the framework and the shaft. The employee was hospitalized with lacerations and other injures to the lower left arm.",1
"An employee was on a roof removing leaves. He fell off the roof to the surface below, suffering a back injury. He was hospitalized.",1
An employee had just finished with vegetative watering and was on the hydro-seeder. The employee stood up as the hydro-seeder went under a low hanging line and he was knocked off the hydro-seeder. He fell to the ground and sustained a fractured hip.,1
"An employee was operating a lift to move a heat wagon when the lift turned over and he fell off. His leg was pinned under the lift, causing a foot/ankle injury that required hospitalization and surgery.",1
An employee was troubleshooting an overhead crane. A part in the electrical cabinet caused an arc flash that burned his right hand. He was hospitalized.,1
"After completing maintenance repairs above a finished product freezer, an employee was climbing down a self-supporting ladder to clean up the work area. The ladder shifted forward and caused the employee to lose balance and lean back against a wall. The shift in weight then caused the ladder to shift even further forward, away from the employee, and the employee fell an estimated 6 feet to the concrete floor below. The employee braced for the fall by reaching out his left arm and landed on his elbow. The elbow was fractured.",1
An employee was hospitalized with a concussion after falling from a stationary ladder.,1
"An employee was using a hose to clean a mixer. The hose got pulled into the mixer and as the employee was pulling out the hose, their hand was pulled into the mixer blades. The employee sustained lacerations requiring hospitalization and surgery.",1
An employee's left hand was amputated while using a cutoff saw.,1
An employee was changing a chain and sprocket when the employee's fingertip was caught in the sprocket and amputated.,0
"An employee was removing burrs from a rotating shaft with a hand grinder. The shaft caught the employee's glove and pulled the employee's left hand into the roller, causing two broken fingers and nerve damage for which surgery was needed.",1
"An employee was cleaning a dust screw auger. The auger caught the employee's hand, causing the amputation of two fingers.",1
An employee was operating a bagger machine line when it became backed up and needed to be cleared. The employee switched the machine to manual and began clearing fasteners with his left hand. The bagger clamps closed on the employee's left ring finger and amputated the fingertip.,0
An employee was helping to move a slab of granite by hand when it shifted and struck him in the head.,1
"An employee was attempting to load a steel plate onto a work table for a water jet to cut when the piece shifted, and a finger on the employee's left hand was caught in a pinch point and amputated.",1
"An employee suffered a hernia while lifting a large bag of dog food, requiring hospitalization.",1
"An employee was strapping product to a skid. The employee's gloved left middle finger was caught between the strap and the product, and the fingertip was amputated.",0
"An employee was delivering mail when she slipped on wet pavement and impacted the ground, breaking her ankle.",1
"At breaktime, an employee was parking an electric pallet jack and was struck by another electric pallet jack. The injured employee sustained a broken lower left leg.",1
"A CNC part fell from an overhead crane sling. An employee jumped out of its way and struck a tool cabinet, suffering a broken rib.",1
An employee was cleaning spilled glue from a belt and pulley. The belt and pulley grabbed the employee's right index finger and amputated it.,0
"An employee was spooling out cable with a power winch. There was slack in the cable. The winch was put into forward, then reverse; the cable tensed and caught the employee's finger against the metal housing. The employee's fingertip was amputated (without bone loss).",0
An employee was handling a large locker door when it slipped and hit his forearm.,1
An employee was leaving the department to take a break. The employee fell and fractured an ankle.,1
"At the hospital, a nurse was injured trying to subdue a patient. The nurse was hospitalized.",1
"On March 20, 2020, an employee was reaching to flip a tube when their arm was caught by the chuck and lacerated. The employee was hospitalized and had surgery.",1
"An employee had climbed onto the roof to perform a task. When the employee was coming down the ladder, the ladder came out from underneath him and he fell to the ground. The employee sustained an ankle fracture and five broken ribs. He also sustained bumps and bruises.",1
"An employee was walking on a work platform when he stumbled and lost balance, then fell and hit his head on a metal bar. He was hospitalized with a scalp laceration and subarachnoid hemorrhage.",1
"An employee was moving a shopping cart out of the office and tripped, resulting in a fracture to her right foot.",1
An employee was unloading appliances. A washing machine fell from a stack onto the employee.,1
An employee was climbing down a 4-foot ladder and fell to the floor. The employee suffered a broken leg.,1
An employee was climbing into her truck when she slipped on ice and suffered a back strain.,1
An employee slipped while transporting hot adhesive. The adhesive went into their glove causing second degree burns to the left hand.,1
"While picking up equipment outside, an employee slipped on a wet, wooden deck and fell. The employee sustained a broken leg.",1
An employee tripped over a hand truck while making a delivery. He fell and was injured.,1
"While unloading a dump truck at a refinery, an employee's hand was crushed by the dump truck's gate.",1
"A flashlight was charging in a small truck cab. It ignited, causing an employee to suffer smoke inhalation.",1
"On March 20, 2020, at about 11:00 AM, an employee was cutting a four-foot piece of wood on a radial saw when the wood kicked back and injured the employee’s left index finger. At the hospital, the finger was amputated to the second knuckle.",0
"On March 20, 2020, an employee was hooking a coil of metal to put in a dip tank when his finger was pinched between the coil and the hook, resulting in a left middle fingertip amputation.",1
An employee was getting ready to access a manlift when he slipped and fell into the opening of the manlift. The metal steps of the manlift hit his chest and pinned him against the concrete opening. The employee was hospitalized with broken ribs.,1
An employee tripped over a flat cart in the warehouse. The employee fell to the concrete floor and their kneecap was shattered.,1
"An employee was working from a manlift in close proximity to the underside of a barge. While maneuvering the manlift closer to the barge, the manlift jerked in an upward fashion causing the employee’s head to be caught between the bottom of the barge and the top rail of the manlift. The employee sustained a fractured mandible and a subarachnoid hemorrhage.",1
"An employee was installing insulated blankets into a knife switch for future work. As the employee was attaching a blanket with a clip, an arc flash burned his hand, shoulder, and ankle.",1
An employee tripped and fell to the cement while unloading materials. He suffered a broken hip and was hospitalized.,1
"A vacuum truck driver was loading his truck with salt water from a tank battery. The truck rolled backward and pinned him to a firewall, severely injuring his right leg and abdomen. He was hospitalized.",1
An employee slipped and fell approximately 8 feet to the floor from the third level of a rack system. The employee sustained fractures to both legs.,1
"An employee was replacing a bumper on a semi-trailer. While aligning the bolt holes, the bumper slipped and the employee's finger was pinched inside a bolt hole. The employee sustained a left index finger amputation.",1
An employee had been driving in a pasture to check on a pregnant cow. The truck door closed on the employee's hand causing an amputation to the right middle fingertip that was closed with stitches.,0
"Two employees were checking secondary voltage in a pad-mounted transformer. One of the employees was holding a voltmeter while the other held its test probes. A test probe was pulled out of the second employee's hand and made contact with an energized device. This energized the voltmeter the first employee was holding, burning his left hand, left shoulder, and both feet.",1
An employee was struck in the head by a falling tree while walking across a job site. He was hospitalized.,1
"An employee was adjusting a pallet when it fell on his leg, breaking it.",1
"While attempting to free a potato that was stuck in a conveyor, an employee's fingertips were nipped by moving parts of the conveyor. The middle fingertip on the employee's left hand was amputated.",0
"On March 21, 2020, an employee was cleaning the rollers on a pasta machine when his smock was caught and his arm was pulled into the machine. The rotating blade inside the machine amputated the employee's arm below the elbow.",1
"An employee was clearing debris from a feed shoot. The employee's left hand was caught in a rotary sorter, which amputated the index, middle, and ring fingers.",0
An employee had been dispatching APCs using a ride-on pallet jack and struck an I-beam. The employee was thrown from the pallet jack onto the floor and fractured their right ankle.,1
The injured employee had been supervising a group and working on a plastic molding machine. The employee's right index finger was partially amputated by the air cleanout device.,0
An employee was troubleshooting a clogged batter pump when the valve turned back on and the auger caught the back side of her finger. The employee sustained a partial amputation of the left index finger.,0
"An employee was carrying plywood on the jobsite and fell through a hole in the parking structure. The employee fell 9 feet to the level below, sustaining injuries to the leg, head, and back.",1
"An employee was conducting a service call for replacement and assembly of a windmill gear box. The employee picked up the pillow block and while setting it into place, his left middle finger was pinched between a plate hole and the stud of the nacelle bed plate main frame. The employee's left middle fingertip was amputated.",0
"While servicing a conveyor belt, a box fell from an overhead conveyor belt and struck an employee in the head. The employee then fell and hit his jaw on a floor-level conveyor. The employee sustained a facial laceration and jaw injury.",1
An employee fell from a roof while looking for a circuit breaker. The employee landed on the ground and suffered a traumatic brain injury.,1
An employee fell down a flight of stairs at a client's private residence. The employee was hospitalized with broken ribs and a closed head injury.,1
"While handling a patient's wallet, an employee came into contact with a white powder resulting in a possible exposure to fentanyl.",1
A security guard was conducting a patrol of the hardwood mill. He stepped over a floor opening and onto a lower lumber deck. He then slipped on a floor grate and broke his left leg and ankle.,1
A tree fell onto an employee's head after being cut down. The employee sustained fractures to vertebrae T2 and T4.,1
"An employee's right glove was caught between the roller, belt, and conveyor under a powered belt conveyor. The employee's arm was broken.",1
An iron worker was walking towards a forklift that was moving a steel beam (about 200 pounds) to the other side of the site. His feet were run over by the left front tire of the forklift. He was hospitalized with a fractured leg and ankle.,1
"An employee tripped over a tool bag and fell to the ground, suffering an injury to the right elbow.",1
"On March 23, 2020, an employee's left index finger was smashed and broken in a rail car's sliding steel door. The employee was hospitalized, requiring surgery.",1
"An employee was moving a roll of film into place. The roll of film dropped, and his right index finger was caught between the roll positioning rod and the framework of the machine he was placing it on. The fingertip was partially amputated.",0
"An employee slipped and fell on a concrete floor. The employee suffered fractures to the left shoulder and upper back, as well as a right knee injury, and was hospitalized.",1
An employee fell to the concrete ground while walking into a hospital. The employee suffered a broken right fibula and was hospitalized.,1
"An employee was removing a clamp from the cable on the swivel. The decking had been removed and the employee was standing on the beam. The employee slipped and fell, landing on the surface casing valve. The employee sustained broken ribs and a punctured lung.",1
"While loading material onto a flatbed trailer, an employee lost his balance and fell to the ground. He sustained a fractured arm.",1
An employee was climbing a 40-foot wooden pole. The employee was about 8-10 feet up the pole when his gaffs cut out and he fell to the ground; he suffered a fractured disc and a bruised leg.,1
"An employee slipped on wet pavement and fell to the street, suffering a broken leg.",1
An employee was getting a cup of coffee when she fell on the floor and injured her right elbow.,1
"An employee was securing the dock locks on a trailer when the trailer moved, causing the employee to slip and get caught between the trailer and the dock. The trailer then rolled back and caused a crushing injury to the employee's head.",1
An employee was transferring product from one truck to another using a transfer plate. The employee slipped and the transfer plate broke the employee's left leg.,1
An employee was using a sealer for plastic bags. A rotating shaft in the sealer caught his sleeve and broke his left arm.,1
"An employee was climbing a ladder. The employee slipped and fell to the concrete floor, suffering a broken right wrist, chipped teeth, and a broken jaw.",1
"An employee was measuring the thickness of a brass strip as it was being fed into a press. A micrometer the employee was using was pulled into a 4-inch gap at the press opening, taking the employee's right hand with it. The employee's little finger was partially amputated.",0
"An employee was on a catwalk, cutting into a tank so it could be scrapped. A spark got into a nearby tank, causing an explosion. The employee suffered a broken jaw and lacerations to the face.",1
"While walking into the bakery, an employee tripped and fell on the floor, resulting in a fractured hip.",1
"An employee was working guard duty when an inmate beat him in the head with a sock that contained a lock. The employee suffered head and facial injuries and swelling, and lost consciousness. He was hospitalized.",1
"During rig down, an employee was attempting to move a hose supported on a spreader bar. The hose came free from the spreader bar and swung into a machine, and the employee's left little finger was caught between the hose and the machine. The distal phalanx of the left pinky finger had to be medically amputated.",0
"An employee was folding up the hydro platform truck. He got the platform stowed, then extended the outriggers/tracks. Afterwards, he flipped the outrigger locks and walked back behind the truck. The hydro platform truck rolled back and pinned him against the tool truck. He was hospitalized with six broken ribs, a punctured lung, a broken left tibia, and a broken right femur.",1
"An employee was operating a nut tapping machine, that cuts screw threads inside the nut, when the nut became jammed. As he tried to clear the jam, his gloved left hand became caught in the rotating nut tap. He suffered at least one fractured finger requiring surgery, with other fingers receiving lacerations. He was hospitalized.",1
"An employee was adjusting a belt tracking on rollers. As he moved to tap a roller with a hammer, his right hand was caught between the roller and the belt, resulting in a partial amputation of the index finger across the nailbed.",0
An employee's finger was amputated.,1
"During barge lid operations, an excavator boom struck an employee standing in the swing zone, breaking the employee's feet. The employee was hospitalized, requiring surgery.",1
An employee was climbing an extension ladder to install metal wall panels at a residential building. The employee fell off the ladder and landed on the ground. He sustained a broken right femur and a laceration to the head.,1
An employee was wiping the outside of a parcel conveyor system with a rag and cleaner. The system activated and pulled his left hand into the roller and belt. His arm and finger were broken.,1
"An employee fell through a drop ceiling while installing insulation, landing on the floor and suffering a severe ankle/foot injury.",1
"An employee was stocking a shelf from a 2-foot stepladder. The employee fell from the stepladder to the floor, suffering a broken left femur. The employee was hospitalized.",1
An employee fell while walking down stairs. The employee landed on a metal landing and broke both kneecaps.,1
"An employee had just loaded a car onto a car hauler. He left the car and the car moved, catching his right thumb against the car hauler. The thumb was injured and was later amputated.",1
"An employee was at a customer's home to repair a cable/internet line. While carrying his ladder to set up against a utility pole, he tripped and broke his ankle.",1
Two employees were unwrapping a crate containing a new pump. The crate slipped and an employee's left hand struck against the pump. The employee suffered a laceration to the index finger and an amputation to the middle fingertip.,0
"An employee was inspecting the brake drum and the left wheel on a forklift. While the employee was reinstalling the brake, his left little finger was caught between the drum and the brake drum. The finger was lacerated and the tip was amputated.",0
"An employee was doing maintenance work on an electrical breaker when an arc flash burned the employee's right hand, abdomen, and forearm.",1
"An employee was using a spudbar/tamping bar to remove asphalt insulation roofing material. As he lifted the bar, his right little finger was caught between it and the metal handlebar of a piece of nearby roofing equipment. The finger was lacerated and broken.",1
An employee had locked out a plastic bottle grinder and was clearing jammed material when a finger on his left hand was caught between two blades. The fingertip was amputated.,1
An employee jumped from a loading dock to the pavement about 3 feet below. He suffered a broken tibia and was hospitalized.,1
An employee was cutting wood stock on a table saw. The saw amputated three fingers on the employee's right hand.,0
"An employee who had been exercising, experienced a heart attack and was hospitalized.",1
"An employee was in a sawmill's re-cutting machine, clearing out a jam. The machine activated. The employee suffered three broken toes, one of which had its tip amputated.",1
"An employee was grinding concrete floor edges using a handheld grinder. When he put the grinder down, his left glove got caught on the wheel as the machine was winding down. He suffered a closed, nondisplaced fracture at the middle of the left little finger.",1
An employee fell (from the roof or a ladder) while working on a residence. The employee landed on the ground and suffered broken vertebrae and brain bleeding.,1
"An employee was unloading a truck at a customer's site. The employee fell from the back of the truck to the ground, suffering broken ribs, a broken collarbone, and a head laceration. The employee was hospitalized.",1
"An employee was on a 28-foot extension ladder that was leaning against (and strapped to) a telephone pole. He was connecting a line from the pole to a house when he fell about 18 feet to the ground, suffering a broken leg.",1
"A forklift backed into an employee, breaking his left foot/ankle.",1
"A driver was raising a trailer's freight door when an item fell on him, breaking his elbow and giving him a concussion.",1
An employee was using a high-pressure water gun to wash parts of a line. The water stream lacerated the top of the employee's left hand.,1
"An employee had grabbed jammed boards at the outfeed of a splitter box when the machine's feed rolls were reversed. The employee's left-hand fingers made contact with the press rolls, resulting in cuts and an amputation of the first joint of the index finger.",0
The tip of an employee's right little finger was amputated.,1
"An employee was using skid steer with an attachment to pull fence poles out of the ground. The skid steer was backing up, carrying a pole, when its bucket tilted and came down. The pole struck and broke the employee's lower right leg.",1
"An employee was cutting logs with a billet saw. The saw blade broke, causing amputations to the employee's left little, ring, and middle fingers. The employee was hospitalized.",1
"An employee tripped and fell to the concrete floor, suffering a broken left elbow.",1
An employee was moving lumber from a saw to a conveyor. The employee's right hand was pulled into the conveyor belt. The hand and finger(s) were lacerated and broken.,1
"An employee was mounting a core box on a machine. The machine snapped shut, amputating his right thumb tip.",1
An employee fell while walking from one side of a patient's bed to the other. The employee suffered a broken left hip.,1
An employee was using a bin drill to clear material hung up inside an ingredient bin. The employee's arm was caught in the drill and broken.,1
An employee was clearing a blockage in a sausage machine. A blade in the machine amputated the top of the employee's left index finger.,0
"An employee fell from the rear of a trailer while loading it, landing on the ground and suffering a broken femur.",1
An employee was burning excess cardboard boxes when a gust of wind blew the flames toward him. His shirt caught fire and he suffered second degree burns.,1
An employee was troubleshooting a machine when her left ring finger was caught in its belt and pulley. The fingertip was amputated.,0
"An employee slipped on ice and fell to the sidewalk, suffering a broken left ankle.",1
"An employee had been traveling on a riding pallet jack. While the employee was off the pallet jack, it struck the employee, tearing ligaments in the employee's left leg and right wrist.",1
"On March 25, 2020, an employee was sanitizing equipment when he lost his balance. The moving parts of a poultry machine (a tail quill puller) caught his right hand, amputating four ringers.",0
"An employee was doing pipeline maintenance work. While the employee was inserting a pig into a barrel, the employee's left middle finger got stuck between the pig and the barrel. The fingertip was amputated.",0
"An employee was trying to unjam a pallet on a conveyor. His right thumb was pinched under the pallet, causing a soft tissue amputation of the thumb tip.",0
An employee was cutting a piece of metal with a saw. The saw kicked back and lacerated the employee's upper stomach.,1
"A forklift struck a cart, which in turn struck and fractured an employee's lower left leg.",1
"An employee was repinning a cable sheave onto a side boom. The employee's left middle finger was caught between the cable sheave and the pinning arm, and was partially amputated.",0
An employee suffered heat-related illness while riding on the back of a trash collection truck. The employee was hospitalized.,1
"An employee fell while walking across a fabric rug, landing on the floor and suffering a broken left hip and wrist.",1
"At about 7:05 a.m. on March 25, 2020,  a McDonald's employee shot five times by another employee. The employee was hospitalized.",1
An employee was removing 2-by-4s from bridge forms. A form fell and broke the employee's collarbone and ribs.,1
"An employee was standing three or four rungs up on an extension ladder that was leaning against the gutter in front of a garage, taking pictures of the roof. He slipped off the ladder and his right leg was caught between its rungs, causing fractures to right tibia and fibula.",1
"An employee was closing the door of an empty trailer. The door's cable was broken and it closed quickly, striking and fracturing the employee's right hand. The employee was hospitalized and underwent surgery.",1
"An employee was walking in a tunnel between two buildings. The employee slipped on a wet floor and fell to the floor, suffering a broken right wrist.",1
"An employee was sandblasting a pipe when the sandblasting machine discharged blasting medium at the employee, lacerating and burning the employee's face.",1
"An employee was riding in the basket of a scissor lift. The employee was caught between the basket and a concrete structure, suffering a broken sternum.",1
"An employee was installing conduit on a wall. He had to loosen the metal straps to get the pipe in the correct position. As he was adjusting the pipe, it slipped and fell. Its circular end struck his left middle and ring fingers, severing the fingertips.",1
"While dismantling a scaffold, an employee fell from the scaffold to the ground. The employee suffered a broken hip and femur.",1
"An employee was delivering glass to a client. He was attempting to secure tarps that were covering the glass on a flatbed trailer when he pulled on a rope and the rope broke. When the rope broke, he fell off the trailer and onto the concrete ground, fracturing his right scapula and three right ribs. He also suffered a concussion and neck injury.",1
"The employee was torqueing bolts on the sprocket of a bulldozer, using a handheld torque gun. The employee's fingertip was caught and crushed between a bolt and the torque gun's reaction arm.",1
"An employee fell into an electrical vault, landing on a concrete floor about 10 feet below and suffering bruises and sprains.",1
"An employee was heating a tub girder when he fell to the ground, suffering a cut to the head that required stitches.",1
"An employee tripped over a forklift's forks and fell against the mast, suffering broken ribs and a punctured lung.",1
"An HVAC technician was returning from lunch to a maintenance job at a home. He was showing a 9-millimeter firearm to another employee when it discharged, shooting him in the left leg. He was hospitalized with a wound to the knee and thigh.",1
"An employee was erecting a steel beam. The employee fell to the ground 13 feet below, suffering a broken hip.",1
"An employee was spray painting a building from a ladder when the employee fell 8 feet to the ground, suffering multiple fractures to the back, knee, and ankle.",1
"An employee was on a roof when it collapsed. He fell 16 feet, landing on a floor inside the building and suffering back and ankle injuries.",1
An employee was working on an air manifold when a fan partially amputated his right ring finger.,0
"An employee was using a pallet jack to move a container from inside a box truck to a lift gate. The employee set the container on the lift gate. When the lift gate was lowered, the pallet jack and the container shifted, and the container knocked the employee to the ground. His right leg was caught between the lift gate and its support and was broken in three places between the knee and the ankle; his right arm struck the ground and was broken between the elbow and the wrist.",1
An employee was unrolling waterproof conduit on a roof. He tripped over a fall protection anchor installed in the roof and fell backwards onto a 3-inch plumbing vent pipe that extended 14 inches above the roof. He suffered several cracked ribs.,1
"While walking, an employee tripped over a 1.75-inch elevated metal edge protecting a floor scale. The employee fell to the floor and suffered a broken left hip.",1
An employee fell while helping offload a trailer. She suffered a cut to the head and a possible leg injury and was hospitalized.,1
"An employee was cutting yarn. The waste yarn cut the employee's left ring finger, amputating the tip.",0
"An employee was using a stand-up mower. His right foot was caught on the lawn mower stand, and he suffered a broken ankle.",1
"An employee was struck by a terminal tractor while picking up a load, requiring hospitalization for a head injury.",1
"An employee was using a bandsaw. The product slipped out of the employee's hand and the bandsaw amputated the employee's right thumb, also breaking the index finger and lacerating the middle finger.",0
"While walking from a parking lot to the workplace, an employee slipped on a rock and fell, suffering a broken arm.",1
"An employee was bringing a piece of equipment into a warehouse on a pallet jack. As he entered the warehouse, the pallet jack hit a hump in the floor and tipped over, breaking vertebrae in the employee's back.",1
"An employee was removing bolts from a piece of machinery. A bolt got stuck; when it came loose, the employee's left index finger was pinched in a tongue and partially amputated.",0
"An employee was using a nail gun to nail a slab on top of a pallet. A nail went through the wood of the pallet and into the employee's leg, right below the calf.",1
"An employee was helping a forklift driver prepare 720-pound 
nose-blocks (slightly curved, cast cement blocks) for shipment when the forklift driver lowered the forks of the forklift, smashing the employee's thumb between the nose-block and 
the wood block and resulting in an amputation.",1
An employee suffered a back injury while lifting a 45-pound box.,1
"An employee was caring for a patient. The employee's foot was caught by cords that were connected with a plastic tie. The employee fell to the floor, suffering a broken hip.",1
"On March 26, 2020, an employee was installing an airbag underneath a vehicle. The pressure released and the airbag struck the employee in the head, causing a shattered jaw and a broken skull. The employee was hospitalized.",1
"An employee was feeding metal into a machine when the metal material kicked back and struck his mid-section, rupturing his colon.",1
"An employee was replacing shingles on a roof. The employee tripped over the hose for a nail gun and fell to the stone ground 8 feet below, suffering three broken ribs and a cut to the head.",1
"An employee was in a 3-foot ditch, unhooking a cement curb inlet. The inlet was raised before it was completely unhooked and struck the employee, causing a back injury.",1
An employee had been pumping gas and was hospitalized for an allergic reaction to a wasp sting.,1
"An employee was rolling a pole on a trailer to unload it when the pole fell from the trailer and struck the employee's left leg, resulting in a broken tibia/fibula.",1
"An employee was on a loading dock checking a delivery truck that had backed up to the dock. The employee fell off the dock and landed between it and the truck, suffering a broken left humerus.",1
A skid steer struck and broke an employee's right leg while the employee was walking.,1
An employee slipped on a board while walking. He fell to the floor and twisted his left leg.,1
"An employee was exiting the stairwell on the second level of the parking garage when she tripped and fell over the curb. She suffered a closed fracture of the left olecranon process (bony tip of the elbow, left arm).",1
"An employee was washing the back of a dump truck. The latches for the back gate were stuck closed, and the employee lifted them up to allow the gate to close. The gate closed and pinched his right middle finger, causing an amputation to the fingertip.",0
"An employee was using a torque multiplier ratchet wrench to loosen a bolt. The wrench broke and struck him in the arm, breaking the forearm. He was hospitalized and underwent surgery.",1
"An employee was working on an R-valve that was clogged with rice. He was using a metal rod to break up the clog. When the clog of rice broke loose, the blades in the R-valve started to rotate and amputated his left middle fingertip.",0
"An employee had just adjusted the speed of a shaker table, and was turning to walk away, when the table's belt caught his left glove and pulled his index finger into the pulley. He suffered a fracture and an amputation to the finger.",0
"At approximately 6:45 a.m., an employee was hand-operating a gang switch when one of the three legs detached from the switch. The live part contacted the employee's left hand and thigh, causing burns that required hospitalization.",1
"An employee attempted to walk a pallet jack backwards when the steering handle turned, causing him to be pinned between the pallet jack and a rack. He suffered a contusion to the chest and collapsed lung, requiring hospitalization.",1
"An employee was welding in a tight area when he accidentally hit the whip line button. The line popped out and ignited his shirt. He had to take his gloves off to unsnap his right sleeve cuff and remove his shirt, resulting in a second degree burn to his right wrist.",1
"An employee fell out of his truck while arriving at work. His left hip was injured on the parking lot surface and he was hospitalized, requiring surgery.",1
"While performing composite clean up, a temporary employee slipped and fell into some metal panels. The panels then caused an industrial exhaust fan to fall on top of the employee, fracturing his pelvis.",1
"An employee was standing on a conveyor system, trying to remove foam material hanging from a roller overhead. The employee slipped and the foam pulled his left hand and arm into the roller. He suffered a broken forearm and was hospitalized.",1
An employee was on an elevated platform removing temporary power after completing a job when the mast the employee was working on broke. The employee fell to the ground below.,1
"An employee was helping a delivery driver stabilize a large switchgear on a lift gate. The switchgear shifted and fell off the gate, breaking the employee's ankle.",1
"An employee was moving a cheese mold on a conveyor using a tool. As the employee was pulling the mold, the employee slipped and fell to the floor, suffering an ankle and possible leg fracture.",1
"An employee was helping replace plastic straps on a unit of corrugated boxes. He tripped on a plastic strap that had been removed during this process and fell to the floor, breaking the ball joint in his left hip.",1
"An employee was driving a forklift in a warehouse. As he was backing up with a skid (wood pallet) load, the load caught on a beam post; his head hit the handle of the forklift and his abdomen hit the steering wheel. He suffered a vertical cut between his eyebrows, about 2-2.5 inches long, as well as an abdominal injury with possible internal bleeding.",1
An employee was trying to retrieve a tray pack of product that was wedged inside a tunnel. The conveyor belt the pack was sitting on pulled the employee's right hand into the sprocket. His little fingertip was amputated and his middle and ring fingers were broken.,1
"An employee was working on a tree about 25 feet up from ground level. He fell, suffering fractures to his left shoulder, wrist, collarbone, and spine.",1
"An employee was unloading a box trailer using a forklift. As the employee drove over the dock plate (which had initially not lined up with the trailer, but had been adjusted), the forklift fell. Two of the employee's fingers were crushed between the forklift's frame and the wall, and were amputated.",0
"An employee was setting up a machine when a piece of steel caught his hand and pushed his pinky finger into a saw blade, resulting in an amputation of the left pinky fingertip.",0
"An employee was repairing a valve when air pressure was lost and the valve closed on the employee's pinky finger, resulting in a fingertip amputation.",0
"An employee was backing a forklift out of a trailer. The employee's left foot struck the trailer wall, causing fractures to the fibula and tibia.",1
"An employee was walking down a ship's ladder carrying an 8-foot-long scaffold pole. Her foot slipped on the wet steps of the ship's ladder and she fell 6-7 feet, striking several metal surfaces. The employee suffered a scalp laceration, four broken ribs, and fractures to three vertebrae in her lower back.",1
"An employee was delivering a package to a residence. A chained-up dog bit the employee, lacerating the employee's right forearm and causing possible nerve damage.",1
"An employee was troubleshooting the cause of a glass jam in a forming machine. As the employee was removing a knuckle pin from a glass forming machine so it could be replaced, the adjacent section's hanger opened. The employee's left thumb was pinched between the two sections, causing a partial amputation of the thumb tip.",0
"An employee was changing the die on a roll former. The machine activated, causing amputations to the employee's fingers.",0
"An employee was adjusting the forks on a forklift. Her thumb was caught in the pivot point of the forks, suffering a partial amputation.",0
An employee slipped on the floor where a drink had been spilled. He suffered an injury to his left leg and was hospitalized.,1
An employee was installing breaker wires. An arc flash burned the employee's forehead.,1
"An employee tripped while turning and fell to the floor, suffering a broken hip.",1
"An employee had just moved the bed of a tow truck using a winch attached to an overhead crane. As he set the bed down on a cart, the winch detached, came back up toward the employee, and struck his left hand, pinching it against the crane hook. He suffered a partial amputation of the middle finger.",0
An employee was carrying a box of fortune cookies from the front of the store to the back of the store when the box became caught on the wall. The box struck the employee in the stomach and she was hospitalized with a liver laceration.,1
An employee was operating a UTV to haul chickens when the UTV hit a pole. The employee sustained a fractured C2 vertebra.,1
A driver was unjamming a load of freight. He fell from the freight and broke his lower leg.,1
"An employee was working on a corrugator machine. As the employee was adjusting a glue machine, the glue machine's chain and sprocket caused an amputation to the employee's left index finger.",0
"While testing an electrical system, an employee suffered an electrical burn to the hand.",1
A forklift ran over an employee's right foot with its back tire. The foot was crushed.,1
"An employee was using a tool to tighten lug nuts on a truck. The tool's reaction bar rotated counterclockwise, pinching the employee's left index finger against the truck wheel. The finger was partially amputated.",0
"An employee was grabbing an apparel cart when her foot got caught on the rack, causing her to trip. Her knee struck the floor and was injured; she was hospitalized, requiring surgery.",1
"At 8:10 a.m. on March 30, 2020, an employee was moving a forklift's forks when his fingers were caught between a fork and the mast. Five-eighths of a finger on his right hand were amputated.",0
"An employee was on a container ship's catwalk, lashing containers to secure them. The employee fell to a deck about 15 feet below and suffered spine fractures, lacerations to the liver, and a head injury that required stitching. The employee was hospitalized.",1
"An employee was setting a steel plate when the steel plate landed on the employee, causing a broken hip and lacerations that required hospitalization.",1
"An employee was cleaning batter from the interior housing of a mixer. Moving parts in the housing caught the employee's right hand, causing the partial amputation of the index fingertip. The employee was hospitalized for surgery.",1
"An employee was removing a stuck board from a wooden container manufacturing machine. The machine lacerated the employee's head above the eye, causing an injury that required nine stitches.",1
An employee was operating a machine. Moving parts inside the machine caused amputations to two of the employee's fingers.,0
"A veterinarian was preparing to give an IV injection to a cat. The cat bit the veterinarian's left thumb; the bite became infected, and the employee was hospitalized.",1
"Two employees were adjusting a roller table and bracing. The metal roll casing fell onto one employee's right index finger while being lifted, resulting in a partial amputation.",1
"An employee was moving a part from the metal pallet. The metal pallet moved as well, catching the employee's right middle finger against a table. The fingertip was amputated.",0
"An employee was in an aerial lift, preparing to remove a section of a bus. A 500-kilovolt power line caused second-degree burns to the employee's chest and arms.",1
"An employee fell off the stool they were sitting on and landed on the floor, breaking their right lower leg.",1
"An employee fell from the second-floor level to ground level while installing a staircase. The employee suffered two fractured ribs and a punctured lung and was hospitalized, requiring surgery.",1
A postal carrier was leaving his postal vehicle to walk his delivery route. An SUV rear-ended the postal vehicle and catapulted the carrier 17 feet into the street. The carrier injured his head on the road surface and was hospitalized.,1
"On March 31, 2020, an employee was standing on the ground, using an extended chainsaw to cut a tree limb that was near an energized wire. The wind blew the tree limb into the wire. The employee suffered entry and exit burn wounds on his right hand and left foot. He was hospitalized.",1
"An employee was moving a chair from the bed of a pickup truck to a loading dock. He stepped into a gap between the tailgate and the loading dock and fell into the truck bed. His right leg was trapped in the gap and broken. He was hospitalized, requiring surgery.",1
"An employee was loosening the bolts in a 1,500-2,000 pound sign. The sign fell and struck the employee in the back, breaking a vertebra. The employee was hospitalized.",1
"An employee was setting up a machine. The employee's left middle finger came into contact with rotating gears, resulting in a partial amputation.",0
"An employee was moving a movable rack containing meats to the smoker when another employee also using a movable rack rammed into him, causing his right middle finger to be caught between the two racks. The employee suffered an amputation without bone loss to his right middle finger.",0
"On March 31, 2020, an employee was cutting sheets of plastic on a table saw. The saw blade amputated the tip of the employee's right index finger.",0
"An employee was cleaning a slitter machine when the employee's hand was caught in the rollers, removing skin from the hand. The employee was hospitalized.",1
An employee was using a pallet jack to pull a pallet of goods off a truck. He fell off the back of the truck and broke both his feet.,1
An employee was attempting to reconnect a hose when the thumb hole punch unit amputated the employee's right ring and pinky fingertips. The unit was guarded at the time of the incident.,0
"An employee was driving a forklift when it struck another, parked forklift. His left foot was caught and lacerated between the two forklifts. He was hospitalized.",1
"An employee was retrieving food from a walk-in storage cooler. The door closed on the employee's hand, amputating the tip of his left middle finger.",0
"An employee was standing on a rolling safety ladder/platform, testing a machine that had been assembled. He fell to the floor, hitting his head, breaking his jaw on the left side, and suffering broken fingers on his left hand.",1
"An employee was servicing a conveyor belt when the chain caught his fingers, amputating his right index and middle fingers.",0
"On March 31, 2020, at approximately 7:48 PM, an employee was unloading a (demountable) pod when he smashed two fingers, amputating one of the fingertips.",1
"An employee was changing out a broken cable. The cable was raised and had a punch installed to hold the weight of the door while the employee was performing the maintenance. When the cable was replaced, the weight of the door dropped, resulting in an amputation of the employee's left middle finger to the joint and a damaged ring finger.",0
"An employee climbed a walking deck to gain access to the hull side of a barge to move a portable welding machine so she could continue welding tank side stiffeners. While climbing down, she attempted to step onto a side stiffener but missed. Her right leg then contacted the tank side angle, causing a fracture to her right tibia.",1
"An employee was splitting bricks with a hammer. The hammer smashed the employee's thumb, and the employee was hospitalized.",1
"An employee was standing on a 2-step step stool to remove a decal/sticker from the exterior of a building when she lost her balance and fell to the ground, hitting her head. She sustained a head injury with brain bleeding.",1
"Two electricians/journeyman mechanics were doing preventative maintenance on a high-density storage system, an aisle with two cranes. They were preparing to lubricate the chains on one of the cranes. One of them was on the lift station, seated above the crane on a cross-support bar to perform lubrication and test the vertical limit switch. He tripped the vertical limit switch to begin the work. The crane and the lift station began to move up, and his right leg was pinned and broken between the frame of the crane and the crossbar of the lift station.",1
"An employee was replacing a wheel on a kiln cart. He was aligning the wheel with the wheel bracket when the wheel dropped down and pinched his left middle finger, amputating 1/3-inch from the fingertip.",0
An employee was trying to tighten slack in a conveyor line. The conveyor line started and amputated the employee's right ring and little fingertips.,0
"While replacing electric insulators, a lineman came into contact with an energized line. The current entered the lineman's hand and exited through his back.",1
A forklift driver was loading a truck at a dock door. The trailer moved away and the forklift fell to the ground; the driver suffered a severe lower back strain/sprain and was hospitalized.,1
"An employee was repairing an HVAC unit on the roof of a school. He slipped on the rooftop ladder and fell. The ladder caught his left little finger as he fell, causing an amputation to the finger.",1
An employee was notching a tree when his chainsaw kicked and cut his right shin.,1
"On April 1, 2020, an employee was performing a screen and magnet check on a B filler when the employee was burned by hot water. The employee was hospitalized.",1
An employee was pushing a board into a wood moulder. The feed roller engaged and pinched his right index finger against the board. He suffered a partial amputation to the finger (without bone loss) and the nailbed.,0
"An employee was pulling a barrel of bell peppers when the employee was struck by the right rear tire of a forklift, suffering bruising, lacerations, and possible fractures to the right foot, ankle, and lower leg.",1
"On April 1, 2020, an employee was operating a 35-ton punch press when it came down on the employee's right hand, amputating the index fingertip.",0
An employee slipped while cleaning the cement floor and broke his hip.,1
An employee was cutting an onion with a knife when the blade amputated two fingertips.,0
"An employee was operating a press brake when it cycled, causing an amputation to his right index finger.",0
"An employee was attempting to align a brick in a strapping machine when the employee's fingers were caught in the machine, resulting in the removal of skin from two fingers.",1
"An employee was attempting to move a light cart when his hand contacted the tongue of the light cart, smashing his finger and resulting in a fingertip amputation.",0
"An employee fell from a ladder onto a concrete slab 15 feet below, suffering broken ribs and a broken nose.",1
"An employee was attempting to load a reel in a machine. While he was lining up the reel with the pintle and operating the controls with his left hand, the reel shifted and smashed his right-hand fingers between the reel and the pintle. His right index fingertip was amputated as a result.",0
An employee was working on a control panel and connecting wires when an arc flash occurred. The employee sustained burns to the face and hands.,1
"An employee was operating a rototiller when the blades of the rototiller became stuck in the ground.  The employee moved to the front of the rototiller and attempted to dislodge it.  The rototiller moved forward and the blades struck the employee's lower left leg, causing multiple fractures.",1
"On April 1, 2020, an employee was using a water hose to wash down a work area when he was either struck in the face by the water hose or fell to the ground and impacted his face. He was hospitalized with lacerations to his face and mouth.",1
An employee was pushing a piece of fabric into a 1-inch crimper. The machine activated and amputated his left index fingertip.,0
"Employees were trying to remove a guardrail so they could replace a concrete sidewalk. One of the guardrail's bolts was 
stripped and would not come out. A skid steer did not succeed in removing the bolt, so they released the pressure from the guardrail. The bolt then came loose, causing the guardrail to pop up and hit one of the employees on the chin. He suffered a neck injury and was knocked unconscious, then had trouble breathing after waking up. He was hospitalized.",1
"An employee was moving a trough full of dough into a secondary mixer when his right hand slipped and his right index finger was caught between the locking mechanism and the trough, resulting in an amputation of his right index fingertip.",0
An employee was mowing grass on a riding mower. The mower caught a boulder and threw the employee backward to the ground. The employee suffered a lower back injury and was hospitalized.,1
"A temporary employee was ascending scaffolding when he reached the top rung, slipped, and fell approximately 6 feet to the concrete floor. He fractured both ankles.",1
"At about 10:50 a.m. on April 1, 2020, four employees were trying to unjam a sheet of drywall that was stuck in a kiln dryer. One of the employees was pulling on the sheet when it moved, causing the drive belt and assembly to rotate and pin his left hand. The pad of his middle finger was cut off to the first knuckle.",0
"A seven-employee crew was removing a 100-foot poplar tree. The crown was cut off and the employee on the tip line (which controls the direction of the tree limbs, keeping them away from power lines) was signaled to begin pulling. The tree limb that the tip line was attached to broke free and struck the employee's torso.",1
"On April 1, 2020, an employee was operating a car haul to move a railcar to the next position on a repair truck. As the railcar approached the car haul the employee shut off the air to the car haul's chugger motor. He then stepped in front of the car haul to remove the car haul's hook from the railcars. As he moved to the front of the car haul, he stepped into a cable loop that had formed on the ground. At this point, the railcar was moving past the employee and car haul position, causing the cable loop on the ground to begin tightening as slack was now being picked up. The cable caught the employee around his hip, pulling and pinching him against the car haul frame. He was hospitalized with a fractured pelvis and perforated bladder.",1
"An employee was climbing a ladder to a roof. The employee fell from the ladder to the ground, suffering a broken pelvis, a shattered left heel, fractured lower vertebrae, and a ruptured spleen.",1
"An employee was feeding product into a sizing machine. The employee's right hand was injured at the infeed point, and the employee was hospitalized.",1
"An employee was carrying a casket when she stepped into a hole and fell, breaking her leg.",1
An employee was operating a manual furnace loader to unload a heat treating furnace when his right foot was caught and crushed between the manual furnace loader and a parked loader.,1
An employee fell from an unknown area and remains unconscious.,1
An employee was removing a utility pole from the ground when the pole struck the back of his left leg. The employee was hospitalized with an injury to the calf muscle.,1
"On April 2, 2020, an employee was sending pieces of wood stock through a chop saw's infeed table. The wood jammed, and the sawblade cut the top of the employee's left hand while he tried to clear the machine.",1
"An employee was emptying the remaining aluminum from a kettle into a mold. The hot metal hit the cold mold and exploded, splattering onto the employee and burning his chest, arms, and legs. He was hospitalized.",1
"An employee was leaving an elevator with a cart which was carrying metal sheets. A sheet fell off the cart and struck the employee's left leg, breaking the femur.",1
An employee was cleaning a bathroom when she slipped on the floor and fell onto the toilet. She suffered broken ribs and a deflated lung.,1
An employee was using a manual pallet jack to move a freight down a steep driveway when the employee tripped over the pallet jack tires and fell on their left side to the concrete driveway. The employee suffered a non-displaced left hip fracture.,1
"On April 2, 2020, at approximately 2:45 PM, an employee was climbing up a portable ladder to inspect a flood gauge on a tank when he slipped and fell to the concrete floor. He was hospitalized with a compression fracture on his back.",1
"An employee was climbing a 4-foot sawhorse ladder to gain access to a narrow scaffold. The scaffold shifted and he fell to the ground, his right leg becoming entangled in the rungs. The leg was broken.",1
An employee was operating a forklift when she hit a safety barrier and injured her lower left leg.,1
"While leaving a supply room, an employee stepped over a rope gate, which entangled the employee's left foot. The employee fell to the concrete floor and suffered a broken right arm.",1
An employee was sitting on a stool working on the computer when the stool broke and impaled the employee in the buttocks.,1
"An employee was using a tagline to guide a crane that was lifting a sign to a post when the employee went near a powerline and it arced over to the crane. The employee was hit with an arc flash, suffering second and third degree burns to the stomach and back.",1
"An employee was changing a pressure transducer on an extruder barrel when hot polyester polymer released due to a pressure buildup, causing severe burns to the employee's right arm and neck.",1
"An employee depressed the foot pedal on an air bending machine to bend parts. He rested his left hand on the area where the arm meets the bending roller, which controls the bending arm. When he released the foot pedal, the bending arm automatically returned to home position and his left thumb was pinched between the arm and the bending roller. His left thumb tip was amputated as a result.",0
"Employees were using a front-end loader to load equipment onto a trailer when the equipment shifted, striking an employee's hand and trapping it between the equipment and the trailer. The employee sustained a broken right pinky finger that required surgery and received stitches on the right ring finger.",1
An employee was operating a powered industrial truck (PIT) when he lost control of the PIT and his leg was crushed between the PIT and a concrete barrier.,1
An employee was cutting wood with a chop saw. The sawblade caught his left glove and amputated his little finger.,1
"An employee was filling a gas truck with liquid propane fuel. The fuel caught fire and the employee suffered burns to both hands, a wrist, and the forehead. The employee was hospitalized.",1
"An employee was standing on a pallet that a forklift operator had lifted approximately 10 feet in the air to remove an exhaust pipe. The employee fell from the pallet while attempting to remove the exhaust pipe 
and struck his left wrist on a water pipe as he fell to the floor. He suffered a severe fracture of his left wrist resulting in hospitalization.",1
An employee suffered a fingertip amputation.,0
"An employee slipped on ice and fell to the asphalt ground, suffering a broken left leg.",1
"An employee was performing maintenance on a vertical two-phase separator. The employee was reconfiguring the sight glass and using various wrenches to loosen the existing fittings and tighten the new fittings. The fitting that connected the vessel to the sight glass piping broke behind the closed valve. The swage (fitting that broke) caused the pressurized hydrocarbons to release into the air, which found an ignition source and started a fire. The employee received second and third degree burns to the hands, legs, and arms and was hospitalized.",1
"An employee went onto a rollcase to try and release a board that was trapped inside the outfeed rollcase of an edger machine. He lost his balance and fell 10 feet onto a steel waste chute, then slid an additional 10 feet to the bottom of the chute. He suffered a fractured pelvis and broken ribs, as well as a laceration above the eye.",1
"An employee opened the trailer door of a truck that had just arrived. A double-stacked pallet inside the truck had become unstable, and its weight pushed the door open very quickly. The employee was knocked to the floor between the truck and the dock plate; the pallet then fell from the trailer onto the employee's right knee. The employee suffered a broken right tibia.",1
"An employee was pressure washing a piece of drilling equipment when he slightly slipped, lost his balance, and ran the tip of the pressure washer wand across his foot, causing an injection wound. He was hospitalized with a foot laceration from the high-pressure water.",1
"The injured employee was inventorying tires when another employee, who was helping, pushed a ladder forward to the next section of shelves and bumped a tire, knocking it off the shelf. The falling tire struck the injured employee, causing a neck injury.",1
An employee was operating package filling equipment when he attempted to loosen clumped sugar in the equipment piping and injured his right hand. He was hospitalized with fractures to four fingers on his right hand.,1
"While walking out of a building, an employee slipped on a patch of ice and fell to the ground, suffering a broken left hip.",1
"An employee was operating a self-piercing rivet machine when it struck her left middle finger, lacerating and crushing the fingertip resulting in amputation.",1
"An employee was removing jammed plastic between an extrusion head and the top of molds when the mold clamp closed, crushing the employee's left-hand pinky, ring, and middle fingers. The employee was hospitalized and required surgery.",1
"An employee was performing safety maintenance pruning procedures on a large oak tree using a chainsaw, pole saw, and hand saw. He was using a tree edge saddle/fall protection gear with a climbing line that was secured in the upper canopy of the tree. He had just finished pruning some dead limbs from the tips of a large scaffold branch and started walking back down the limb toward the trunk. He noticed a branch he had cut was stuck between two limbs, so he lowered himself down in between the limbs. He grabbed his handsaw (blade up) and reached out to pull the limb toward him. During that time, the limb freed up. The force of his pull caused his hand and handsaw to jerk toward his climbing line. The handsaw contacted his climbing line, which then snapped in half at the point of contact, causing him to fall 35 to 40 feet to the ground. He suffered a broken wrist and three broken bones in his ankle.",1
"An employee was attempting to hook a dolly up to a trailer when the employee's left ring finger was caught between the trailer and dolly, resulting in a fingertip amputation (no bone).",0
"An employee was connecting a towable arrow-board to a truck hitch. A car entered the construction zone and struck the arrow-board, knocking it into the employee. The employee suffered leg and facial injuries.",1
An employee was using a machete to free a cut tree limb from vines. The machete cut the employee's left hand.,1
"A temporary employee was adjusting dunnage under a lifted load of corrugated metal decking when he signaled the forklift operator to let the boom out. During this process, a piece of decking slid off and hit his lower leg. He was hospitalized with a right ankle fracture and a fractured right tibia and fibula.",1
"On April 3, 2020, an employee was placing caution tape around a crane lifting area when the crane extended the outriggers, one of which landed on the employee's right foot. As a result, he sustained three toe amputations.",0
"An employee was unjamming a de-clipper machine. After the air lines were shut down, the clipper head partially amputated the employee's thumb.",1
An employee was unloading a control panel with a pallet jack when the panel tipped over and fell on the employee. The employee suffered a left leg injury.,1
"An employee was pinned between two concrete molds while checking on a kiln issue, resulting in severe leg injuries.",1
"An employee was about 10 feet off the ground in a bucket truck's bucket, trimming a pecan tree. The bucket was snagged by a branch and the tension pushed it. The employee fell to the ground and suffered a sprained back and shoulder. He was hospitalized, requiring surgery.",1
"An exit swing conveyor (which directed piping to a quenching machine) was undergoing maintenance. The swing conveyor abruptly cycled and swung to the left, pinning an employee's leg against a building column. The employee suffered a broken right femur and was hospitalized.",1
An employee was stabbed while fighting with a customer. The employee was hospitalized.,1
"An employee jumped over rails and landed on a surface that gave way, falling to the next level below.",1
An employee was found laying unconscious next to a utility vehicle with a broken jaw and cuts to his lip and head.,1
"An employee was loading a piece of equipment onto his flatbed delivery truck when he slipped and fell to the ground, dislocating his right arm from his shoulder.",1
"At about 1:00 p.m. on April 4, 2020, an employee was removing a patient to a seclusion room. The patient kicked a door, which slammed on the employee's fingers. The employee's right middle and ring fingertips were amputated.",0
An employee was spotting for a backhoe when its track struck the employee. The employee's left leg was amputated from the knee down.,1
An employee was operating a metal shear when the shear amputated his left index finger to the first knuckle.,0
"An employee had been moving 4 x 8 pieces of wood. The employee fell through a ceiling, landed on the ground, and sustained a laceration to the head.",1
"An employee was mowing grass. The employee slipped and his left foot went under the mower deck, where the mower blade amputated his big toe and second toe.",0
"An employee had just started a coating line and lowered the rollers over the rod. The employee reached over the rod to tap it, in order to remove some air bubbles in the coating liquid. The sleeve of employee's cleanroom suit, along with his right arm, were pulled in between the idler and the film. The employee sustained a fractured right arm.",1
"An employee carried an extension ladder to the work location and was raising it to a strand. He realized that the strand hooks were not extended, so he slowly lowered the ladder to extend the strand hooks. He then stepped into a hole in the customer's yard and twisted his ankle. He was hospitalized with a fractured ankle and had surgery.",1
"An employee was slicing potatoes. The slicing machine caught the employee's left hand, partially amputating the middle finger.",1
"An employee was in a buffer room, putting pallets away using a forklift. His hand was caught between his forklift and another forklift, and he suffered fractures to the left ring and little fingers and a lacerated palm.",1
An employee walking down a passageway was struck by a loaded fork truck. The employee was hospitalized with broken bones.,1
"On April 5, 2020, at approximately 2:30 AM, an employee was checking the chain tension on a discharge conveyor. His right index finger became pinched in the conveyor's chain and sprocket and was amputated.",0
An employee was troubleshooting the dehydration unit at the compressor station when he sustained burns to the hand and face from a fire. He was hospitalized.,1
The injured employee was in the back room with a cart and was speaking with another associate. The injured employee then stepped backwards out the back door and fell from the dock to the ground. The employee was hospitalized for a broken femur.,1
"An employee was cleaning waste material from a ready-mix plant. A piece of the material broke free and rolled into the employee's right lower leg, breaking it.",1
"The injured employee was replacing linens underneath a patient and moving the patient from an operating room table to a patient bed with the assistance of co-workers. During this work, the injured employee tweaked his lower back. The injured employee was hospitalized with a lumbar sprain.",1
"An employee was investigating a power outage. As the employee was using a multimeter to see if a panel had power, an arc flash burned the employee's arms and hands.",1
"An employee was explaining a framing change and stepped backwards off the second-floor deck. The employee fell 11 feet to the ground below and sustained fractures to a leg, an arm, and the pelvis.",1
"While walking around the property, an employee stepped in a hole and fell. The employee sustained a broken leg and a hip injury.",1
An employee fell approximately 18 feet from a bridge. He was hospitalized with a broken C7 vertebra and two broken arms that required surgery. The employee wasn't wearing fall protection at the time.,1
"An employee was removing metal shavings from a lathe when the lathe rotated, causing an amputation to the tip of the employee's right thumb.",1
An employee had been collecting molten copper samples for testing and started feeling sick. The employee was hospitalized for heat exhaustion.,1
"An employee was operating an all-terrain forklift on a construction road. The forklift drove off the gravel road and rolled over onto its side. The employee sustained fractured ribs, a fractured C6 vertebra, and a vertebral wedge fracture.",1
An employee was walking to a cash register when he tripped on a trash can and fell on the floor. He sustained a broken femur that required surgery.,1
"An employee was cleaning his knife at the end of a shift. The knife stabbed his left hand, puncturing his cut-resistant glove and cutting an artery. He was hospitalized.",1
"An employee was using a grinder with a cutoff wheel to cut pipe. The wheel broke apart and struck the employee in the left forearm, pieces of it became embedding in the forearm. The employee was hospitalized.",1
"While walking an employee tripped over a shopping cart and fell, sustaining a broken hip that required surgery.",1
"An employee was hooking a tractor up to a trailer when the entire unit began to roll. The employee tried to stop the unit with a hammer, but was injured by the tractor trailer. The employee sustained abrasions and cuts to the chest, abdomen, right hand, foot, and ankle.",1
"While engaged in sanitation collection, the employee was struck by a motor vehicle. The employee was hospitalized and required surgery for compound fractures to the lower right leg/foot.",1
"On April 6, 2020, an employee climbed a 25-foot pine tree to complete routine maintenance trimming on a two-phase powerline. The employee completed the work on the southwest side of the tree, passed through the center, and began to reposition to the northeast side of the tree. While the employee was repositioning, the limb that he had his work positioning lanyard attached to failed and the employee fell approximately 20 feet to the ground, landing on his back near the base of the tree. The employee was hospitalized with a ruptured diaphragm, collapsed lung, multiple lumbar and thoracic fractures, laceration of the spleen, epidural hematoma, right renal contusion, and multiple rib fractures.",1
"An employee moved a fixture into the load area using a cart caddy/fixture mover, then went to the other end of the facility in the unload area to retrieve another fixture to move. As the employee was walking backwards across the facility and operating the cart caddy/fixture mover, he was caught between the cart caddy/fixture mover and the fixture he had deposited earlier. He sustained an abdominal compression injury.",1
An employee had been cutting or measuring the coating on a 20-foot section of pipe. The employee was pulled into a rotating lathe and sustained lacerations to the face and upper body. The employee was hospitalized.,1
"An employee was climbing out of his tractor and missed the bottom step. He fell to the ground, landing on his left knee. The employee's patellar tendon was torn, requiring hospitalization and surgery.",1
"An employee was putting a chain back on the drive sprocket of the live hang. The line came on, catching his hand between the sprocket and the chain, resulting in a cut and fracture to the left hand.",1
"At 9:30 a.m. on April 6, 2020, an employee was drilling a hole in concrete for bollard installation. The drill bit got stuck in the concrete and started to wobble. The foot then broke free and turned, hitting the employee's foot and knocking him to the ground. He suffered a broken hip and was hospitalized.",1
An employee was removing a jammed stick from a band saw when the saw blade amputated the end of the employee's left index finger.,0
"An employee was carrying work materials towards a lumber bundle. While walking, the employee was struck by a forklift that was traveling towards the lumber bundle. The employee was hospitalized with a broken left femur.",1
"A bundle of paper rolls fell off a rack as it was being lifted by a forklift. It rolled into an employee who was adjusting a slitting machine, pinning him against the machine and breaking his right femur.",1
"An employee had been packing up some belongings. The employee started picking up papers from the floor while sitting in an office chair. The employee lost their balance and fell to the floor. After being helped back up, the employee proceeded to their car, but fell in the parking lot. The employee sustained a hematoma on the back of the head and may have a broken bone in their neck.",1
"An employee was transferring a patient from a bed to a wheelchair. The brakes on the wheelchair failed and the employee fell, suffering injuries to her right upper leg, hip, and elbow.",1
"An employee fell off an 8-foot step ladder and landed on the ground. The employee was hospitalized with injuries to the back, elbow, and ribs.",1
"An employee was part of a roofing crew that was demolishing a roof. The employee was walking toward the roof ladder when he fell through a section of the roof that had been cut out. He landed on the ground about 18-20 feet below, broke the left leg, and was hospitalized.",1
"An employee was preparing to remove a bolt when the cut-off wheel came loose and struck the employee's neck, lacerating it. The employee was hospitalized.",1
"An employee was bending 3-foot long rebar on a rebar bending machine. He was bending to 90-degree angles, using the foot pedal for control. His finger was caught in a pinch point and was partially amputated.",0
"At 1:40 p.m. on April 7, 2020, two employees were replacing a 150-pound drive unit on a forklift. The drive unit shifted and fell onto one employee's left index finger, pinning it against a nearby floor jack. The finger was amputated above the nailbed.",0
"An employee was using a machine to bend metal ridge cap shingles. The machine's dies closed on his right hand and crushed the fingers. The ring finger was surgically amputated, as were the middle and little fingertips.",0
"An employee was on the back of a digger derrick, prepping the unit for an endurance test. The employee was using a torque wrench to remove bolts for analysis. As the employee was applying force, the socket slipped from the bolt resulting in a loss of balance. The employee fell 4' 7"" from the back of the truck onto the ground. The employee landed on both feet and sustained a broken left ankle that required surgery.",1
"An employee had been trimming a tree at a peak working height of approximately 40 feet. While descending the tree, the employee fell approximately 10 feet to the ground and sustained a fractured sternum.",1
"An employee was using a pressure washer to wash grease off of equipment. The employee was moving the power washer wand from side to side, when the wand went across his right foot. The pressurized spray cut through his boot and caused abrasions and lacerations to his right foot. The employee was hospitalized.",1
"An employee was leaving work. A car struck her in the parking lot, breaking a bone.",1
"An employee was loading a tube into the collet of a bending machine when the grip closed on the employee's little finger, amputating the first joint.",1
"On April 7, 2020, at approximately 7:20 AM, a maintenance employee was adjusting the height of a mower, which requires adding or removing shims from travel tires. While removing shims, the hydraulics bled down, causing the mower to slide down and catch the employee’s right hand in a pinch point. The employee sustained a compound fracture to the fourth finger and the fingertip was amputated.",0
"An employee was cleaning tandems with a hot water hose. While cleaning his left boot with the hot water, he sustained second and third degree burns on the left ankle.",1
"While trying to strike a nail with a hammer to flatten it. The hammer struck the employee's finger, cutting it.",1
"An employee was using a water hose to add water to cement in a cement mixer. The mixer pulled in the hose and the employee's hand, and the paddles amputated his index and middle fingers.",0
An employee had been unloading material from a truck. The employee had a heart attack and was hospitalized.,1
"A carpenter was operating the concrete mixer. He used an all-thread rod to loosen hardening concrete. The all-thread rod and the employee's shirt sleeve got caught in the concrete mixer's shaft injuring the employee's hand. He sustained lacerations to his fingers. In addition, one finger was amputated and another finger was partially amputated.",0
"An employee was using a scouring pad to remove excess zinc from a steel tube on a mill. As the employee was moving up and down the tube, the employee's gloved hand was pulled into the mill's rollers, resulting in partial amputations to the right middle and ring fingers.",0
"An employee was fixing a crossup at the sorter incline chain. The employee was attempting to get on the grating under the incline chain when his foot slipped and he fell in-between the guardrail and the grating. He fell 14 feet to the floor, hitting an airline on the way down. The employee was hospitalized with a fractured skull and possible fractured vertebrae.",1
"An employee was closing an overhead door with an attached tagline for closing the door. The bolt the tagline was attached to came loose and struck the employee in the head; the employee fell backwards, suffering a broken ankle.",1
"An employee was working from a ladder to fix a hole in a spout. The ladder slipped and the employee slid down the ladder, catching his thumb on the ladder. The employee sustained a partial amputation to his left thumb.",0
An employee jacked up a trailer for repair and then got under the axle to perform work. The trailer was equipped with an auto-leveling system. The system activated and pinned the employee between the axle and the ground.,1
An employee had been installing door and inside trim at a location. The employee was cutting lumber with a chop saw and amputated his left middle and index fingers.,0
An employee was driving down an aisle in a powered industrial truck. The truck hit some racking and a pallet on the rack struck the employee. The employee suffered a broken hip and was hospitalized.,1
"Two employees were performing monitoring well services for environmental compliance. One of the employees was kneeling to remove a well cap when a car that had just been fueled drove away from a pump and ran over the employee's right leg. The employee suffered a broken tibia and was hospitalized, undergoing surgery.",1
"While making boxes in the back room of the store, an employee tripped over the corner of a pallet that was on the ground and fell to the floor. He was hospitalized with a broken right hip.",1
"An employee was sitting on a large engine, masking an electrical system off for painting. The employee moved to step onto a lift and fell to the ground, suffering a broken elbow.",1
An employee was manually shrink wrapping a pallet while walking around it. The employee tripped and fell to the floor of the loading dock. The employee sustained a broken left hip and was hospitalized.,1
"On April 8, 2020, an employee was on an A-frame ladder, cutting pipes of a heat steam tube to remove the heat exchanger. The employee cut above two valves on the heat exchanger and the heat exchanger rolled forward. The cut tube lacerated the inside of his elbow.",1
"An employee was unloading cargo. When he cut a banding strap, the cargo shifted and crushed his pinky finger. The fingertip was amputated.",0
"An employee had been performing roofing activity. While descending from a ladder, the employee lost his footing and fell 5 feet to the ground. He was hospitalized with a twisted ankle.",1
"An employee was throwing a strap over a load in the yard. The strap got stuck so he got onto the truck to adjust the strap. He slipped off the truck, injuring four ribs on the way down.",1
An employee was climbing down off a loader when he fell to the ground 3 feet below. He suffered a broken hip.,1
"An employee was climbing down from a flatbed truck. He slipped and fell to the ground, breaking his femur. He was hospitalized.",1
"An employee was driving a luggage cart in the drive lane. Another cart approached from the opposite direction; the employee swerved and made contact with a parked luggage cart. The parked cart's spring-loaded hitch detached and struck the employee, breaking the employee's ribs.",1
An employee was setting up anchor points on a roof when he slipped and fell 14 feet off the roof. He was hospitalized.,1
"A delivery driver was unstrapping a load of aluminum for delivery. Part of the load fell on him, fracturing his back.",1
"An employee was using a roller to flake corn. While removing some rocks from the rolls, the employee suffered a partial amputation.",1
"An employee was working on a weed-wacker and cut their right index finger. When the employee saw blood, the employee passed out and fell to the ground, breaking a jaw bone.",1
"An employee was cleaning a cheese hopper. Her sleeve became entangled in the mixing rod and was pulled in, entangling her arm. The employee was pulled into the side of a hot tank, which caused burns to her face, shoulder, and chest. The employee also sustained injuries to the right arm.",1
"An employee was working out of a lineman truck bucket about 18 feet over a coned-off lane, installing traffic light mounts on an under-bridge deck. A semi tractor trailer swung wide and hit the bottom corner of the lineman truck bucket. The impact pinched the employee's arm between the bucket and bridge, breaking the arm.",1
"While walking out of an elevator, an employee tripped and fell on her right arm, fracturing it in two places.",1
"On April 8, 2020, an employee was assembling and feeding copper and cables into a crimper machine. The machine closed on her left index finger, breaking the finger and partially amputating the fingertip.",1
"At 1:00 p.m. on April 9, 2020, an employee was turning to walk away from his truck when he tripped on a flatbed cart and fell to the ground. He landed on his knees and sustained injury to the knees and quadriceps tendon.",1
"An employee was grabbing pieces of OSB board from a stack and placing them on top of shingle pallets. Four or five pieces fell, one at a time, and a corner of a piece struck the employee on the toe resulting in a fractured toe.",1
"An employee was cleaning up debris in a second-floor room. The employee fell into a 3-foot by 3-foot hole, landing on the floor about 12 feet below.",1
An employee was on a scissor lift installing sheet metal for a mini-storage unit. The employee was approximately 19 feet high when a strong wind blew the scissor lift over. The employee sustained back injuries and a broken arm.,1
"An employee was operating a motorized pallet jack. It collided with another, parked pallet jack; the employee's left foot was caught between the two pallet jacks and the big toe was broken. He was hospitalized.",1
An employee was packing up his truck at the end of the work day. There was a group arguing in the distance and a shooting occurred. The employee was struck in the thigh by a stray bullet.,1
An employee was on a 32-foot extension ladder while inspecting the roofline of a two-story residential home. The employee fell from the ladder and broke both ankles.,1
"An employee was on a bridge, fixing containment for sandblasting. He fell from the edge to the ground 4-5 feet below and suffered a broken pelvis.",1
A taping machine caused an amputation to an employee's left index finger.,0
"An employee was stepping into a truck when he slipped in the rain and fell to the ground, suffering a broken right leg.",1
"On April 9, 2020, an employee was operating a pesticide sprayer on a slope at a golf course. The sprayer rolled over and broke his right thigh.",1
"An employee was exiting a parked scissor lift. While descending the ladder, the employee fell to the ground and sustained a broken hip.",1
An employee was placing a beam using a boom lift. The employee was pushing away the beam when his right thumb was pinched between the top of the lift and the beam. The tip of the thumb was amputated.,0
An employee suffered facial injuries while setting up a small press.,1
An employee sustained a crushing injury from an electric pallet jack. The employee was hospitalized with a fractured tibia and fibula.,1
An employee was working on a conveyor line. A machine activated and struck the employee's leg resulting in a laceration and fracture to the leg.,1
An employee fell 11 feet to a lower level through a floor opening. The employee suffered a fracture injury.,1
An employee was on top of a dumpster to cut a strap. The frame that holds the basket hit him in the forehead and knocked him into the dumpster. He suffered head and back injuries.,1
"An employee was walking down an aisle. The employee turned, lost his footing, and fell to the floor. The employee sustained a broken nose, a broken shoulder, and a laceration on the forehead.",1
"While threading pipe, an employee's hand was pinched between a wrench and pipe threading, resulting in the partial amputation of a fingertip.",0
An employee was cutting bone on a bandsaw. The saw cut off one of his fingertips.,1
"An employee was cleaning a fryer when a bucket spilled excess hot oil onto his body, burning him. He was hospitalized.",1
An employee was using an overhead crane to lower material onto a table. His left-hand fingers got caught between the material and the table. Four fingers were broken.,1
An employee was stepping from the ground to the second step when their body twisted and their knee gave out. The employee fell to the ground. The employee was hospitalized with meniscus tears in both knees and a fracture above the right knee.,1
An employee was shocked while working on equipment.,1
The injured employee was moving a cart with three other employees. The cart was holding a fiberglass console. The cart hit the edge of concrete causing the load to shift and fall onto the injured employee's hand. The injured employee was hospitalized with lacerations to the pinky and ring fingers on the left hand.,1
"An employee was performing a CT scan when she slipped on an IV cap on the floor. Her ankle rolled and she fell, landing on and breaking her right arm.",1
"On April 10, 2020, an employee was performing stocking duties. The employee was coming down a track ladder in the back storeroom, missed the last step, and fell to the concrete floor. The employee landed on and fractured her right hip.",1
"During power restoration work after a storm related outage, a crew was assigned to clear a broken pole and low wires from a roadway. An employee was removing the remaining primary take off conductor. The pole dropped straight down, but then bounced back up and towards him. The telephone cable struck him in the neck region, knocking him unconscious, and pinning him in the bucket. The employee was hospitalized with a contusion to the right side of the neck and possible injuries to his thyroid and carotid.",1
An employee was cleaning a conveyor in the evisceration area when their arm was caught by the roller. The employee sustained multiple lacerations to the left arm.,1
A valve on a tanker truck actuated while an employee was putting in a part. It amputated about 1/8 inch of the employee's fingertip.,0
An employee was driving a pallet jack to the back of the dry storage area to put away the dry mop. The employee exited the pallet jack as it was coming to a stop. The pallet jack rolled over the employee's right foot causing a crushing injury.,1
"At 4:10 a.m. on April 10, 2020, an employee was setting up a new roll of plastic on a winder machine. The machine pulled in the employee's left hand, breaking several bones in the forearm area. The employee was hospitalized.",1
An employee was hitching two cargo dollies together. A tug struck one of the dollies creating a nip point with the trailer hitch and tongue that amputated the employee's fingertip.,0
"An employee was driving a stand-up forklift, carrying a load of batteries. His left ankle was caught between the vehicle and a fixed racking system. He suffered fractures to the ankle and was hospitalized.",1
"An employee was cleaning a gas pump, working inside a coned off area, while wearing a reflectorized vest. A vehicle entered the coned off area and ran over the employee's feet. The employee sustained a fractured right ankle.",1
"An employee tripped on the edge of a pallet and fell to the floor, suffering an injury to the left hip.",1
"While stepping over trays of bread, an employee tripped over a roller of empty trays and fell to the floor, breaking his right hip.",1
"An employee stepped off a waste management truck, which then ran over his right foot, crushing his foot/leg.",1
"While working on a panel, an electrical arc flash occurred and burned an employee's torso and arms. The employee was hospitalized.",1
"An employee slipped on a drain plug in the floor and fell, their head striking a table. The employee suffered a pinched nerve and was hospitalized, requiring surgery.",1
An employee was using bolt cutters to open a transfer trailer door. The door sprung open and struck the employee in the face causing lacerations.,1
An employee was using a band saw to cut meat. The saw amputated the tip of the employee's right middle finger.,0
"An employee was sanding the edges of some parts. The sander pulled in the employee's right index finger, partially amputating it.",0
The injured employee was helping another employee unload a skid steer and a few attachments off a delivery truck. The injured employee was helping to guide the driver of the skid steer when his left foot was caught under the skid steer's tracks as it moved closer to the attachments to connect them for unloading. He suffered a right distal tibia fracture and was hospitalized for surgery.,1
"An employee was unjamming a piece of frozen meat from a locked-out auger. When the employee inserted a T-handled bar into the winding down auger, the bar moved, and pinched the employee's hand against the machine's fixed guard. The employee sustained an amputation.",0
An employee suffered a partial amputation to the right thumb while closing a magnetic safe.,0
"An employee was climbing into his truck cab when he fell backward, hitting his head on the concrete slab and breaking his skull.",1
An employee's finger was caught in a doorjamb. The fingertip was amputated.,1
"An employee was working in a wet air oxidation unit. As she was clearing a hose into a tank, she was sprayed with spent caustic released from the tank's top hatch. She suffered chemical burns and was hospitalized.",1
"An employee fell off a golf cart, striking his head on the ground and suffering a fracture.",1
"An employee went to close the door of a diverter. When he pushed the diverter closed, it came back and smashed the end of his right thumb resulting in a partial amputation.",1
"An employee was drilling holes in a part using a radial drill press. His left hand was entangled with the drill and injured, with partial amputations to multiple fingers.",1
An employee was thrown from a powered industrial truck to the floor. The employee suffered a broken leg and was hospitalized.,1
"A temporary employee was lifting a transformer from on top of a pallet when his left index finger was caught between the pallet and the floor, resulting in a partial amputation of his left index finger.",0
An employee was lifting a transformer from on top of a pallet. The employee's left index finger was caught between the pallet and the floor and was partially amputated.,0
"While walking from the fifth floor to the fourth floor, an employee tripped and fell down two steps to the ground. He sustained a broken right ankle.",1
"An employee was about to remove the stair tower so that he and other crew members could replace it with a new tower. He was at the stair landing between the bottom floor and the second floor. He stepped up the first stair tread. The angle clip that held the tread in place was rotted. The employee fell through the stairs to the ground, breaking his right leg.",1
Employee was climbing down from a pole after assisting CMP with storm restoration and fell to the ground. He was hospitalized with a heart attack and pneumonia.,1
"An employee was in an excavation about 15 feet deep, probing with a probe bar to find an existing sewer pipe. Part of a step fell and hit him on the knee, causing him to fall. He suffered injuries to his knee and two left-side ribs.",1
An employee was operating an aluminum stretcher machine. The employee was struck by a piece of steel tooling that failed while in the machine. The employee sustained a laceration and a fractured lower leg.,1
A dog bit an employee on the right forearm while the employee was delivering mail.,1
An employee was coming down a ladder while holding his brick holder and shovel when he missed a step and fell to the concrete floor. He fractured his leg.,1
"On April 13, 2020, a UPS employee was returning to her package car after making a delivery to a customer's porch. When the customer opened their door to retrieve their package, a dog ran out of the house and bit the employee's right calf. The employee was hospitalized.",1
"An employee tripped over a pallet jack and fell to the ground, suffering a broken hip.",1
"An employee was walking out of a shower he had just cleaned. The closing door caught his prosthetic left leg, causing him to trip and fall to the tile floor. His hip was broken.",1
"The injured employee walked across the customer's parking lot to help another driver who was working in a trailer. The injured employee was entering the back of the trailer by climbing up the side of the lift gate, while it was in the raised position. The injured employee slipped and fell approximately 3 feet to the ground, landing on their hip. The injured employee was hospitalized with a fractured right hip and required surgery.",1
"An employee was stabilizing a load on a pallet when the contents collapsed on him. He then fell out of an open dock door and landed on the receiving dock ramp. The employee sustained a head injury, two fractured ribs, and a fractured clavicle.",1
"An employee was operating a bending machine, making bends into thin gauge stainless steel bands. As the employee loaded the end of a steel band into the machine's tooling, her finger slipped up the side of the band and was caught in the point of operation. The fingertip was amputated.",0
"A temporary employee was trying to turn a riding pallet jack when he lost his balance and fell from the pallet jack, landing on his tail bone/back and hitting his head. He was hospitalized with bruising to his back and head.",1
"While delivering mail, an employee slipped on ice and fell to the ground, suffering a broken right femur.",1
"An employee was using an overhead crane to return a spent parent roll to a stand. The roll bounced and smashed his left middle and index fingers against the crane hook. Both fingers were crushed and cut, and the middle finger was amputated to the first knuckle.",0
"An employee was cutting hind shank with a bandsaw. The bandsaw cut his right middle and ring fingers, amputating both.",1
An employee sustained a right knee contusion while operating a pallet jack.,1
An employee was treating a patient in the back of an ambulance. The ambulance stopped quickly and the employee suffered a fractured C7 vertebra and bruises.,1
"An employee was collecting sawdust from under the edger and saw a piece of wood lodged in the bottom side of the edger. When he reached to remove the wood, the saw caught the scrap wood and pulled the employee's hand into the blade resulting in an amputation.",0
"An employee was hooking up piping connections. He removed a pipe from a tank that was filled with hot water. When he raised the pipe up, it filled his boot with hot water. The water burned his lower leg and foot.",1
A machine operator was completing a setup to run another sheet metal part on an automatic straight side press. The machine cycled and the employee's hand was caught by the die. He sustained amputations of the left index and middle fingers.,0
"An employee was walking away from a log conveyor when he tripped. His hand was caught on the conveyor belt, and he suffered two broken fingertips and a flesh amputation.",0
"An employee was adjusting a pipe when the employee's hand was caught between a pipe shoe and angle iron, crushing the employee's finger.",1
"An employee was working on a floor truss on a floor truss manufacturing machine's table. After the employee turned the truss, the table closed on his left thumb and amputated it about halfway down the nail.",0
"After planing the edge of a piece of wood with a jointer, an employee was inspecting the wood when the jointer's cutting head caught his left glove at the little finger. The finger was amputated at the first joint, below the fingernail.",0
"An Eversource employee was recovering downed power lines in a street. A vehicle entered the work zone and struck the employee, running over and breaking the employee's ankle as well as striking the employee with its side view mirror.",1
An employee was working with a hydraulic strand jack machine when a stream of hydraulic fluid entered their right middle finger. The employee was hospitalized with a possible infection.,1
An employee fell off a ladder and sustained a back strain.,1
"An employee was climbing the steps of the compactor roller and fell to the ground. The employee sustained fractures to the right ankle, fibula, and tibia.",1
"An employee was climbing up a fixed ladder to verify a process valve lineup. He fell off the ladder, landing 10 feet below on a rail and gravel. He suffered lacerations to his left elbow; collapsed lungs; and fractures to the ribs, elbow, and pelvis.",1
An employee was preparing to assist the trackhoe operator with plate placement. The employee was struck by the swing arm of the trackhoe and was then pinned between the trackhoe's bucket and a rock box. The employee sustained a broken left hip.,1
An employee was loading an aluminum bar into a machine from behind when his right hand was punctured by the bar.,1
"At about 9:30 a.m. on April 14, 2020, an employee was operating a table saw when it cut his hand. He was hospitalized.",1
An employee was removing a piece of glass from a truck. The glass broke and lacerated the employee's arm.,1
An employee was preparing to hook up electrical service on a pedestal when the employee was exposed to an arc flash resulting in burns to the face and neck.,1
An employee was clearing an opening to run bailer wire around a cardboard bail when the up-right bailer machine cycled. The one-foot long iron bar tool he was holding shifted and caught his left pinky finger against the bailer machine resulting in an amputation.,0
An employee was removing a piece of wood from a pallet on a roller conveyor when their right middle fingertip was pinched between the pallet and the backstop of the roller conveyor and  amputated.,0
"On April 14, 2020, an employee was retrieving produce from a walk-in cooler. The employee tripped on a pallet and fell forward onto the concrete floor. The employee was hospitalized with a fractured nose and contusions to the cheek and forehead.",1
"Two employees were assembling a roll-up door. Tension had been applied to help roll the curtain into the door barrel; one of the employees was using a metal bar and a pin to secure the pre-tension wheel as this tension was slowly released. The pin dislodged and the wheel spun, pinching the employee's left hand between the end bell metal plate and the bar. The employee's index and middle fingers were crushed and the tip of the left index finger was amputated.",1
"An employee was working on a metal cover on a second-level carousel. The employee fell about 14 feet to the floor below, suffering a contusion to the left side of the body, a contusion with abrasion/swelling to the back of the head, a contusion/abrasion to the front of the left hand, a contusion (and pain) to the left shoulder, and a contusion/swelling to the left hand/wrist.",1
"An employee was walking across a repair bay doorway when a vehicle struck him, causing a closed fracture of the right tibia.",1
An employee was operating a soil compactor in a building. The compactor backed into the structural framing of the building and the employee was caught between a steel I-beam and the compactor's steering wheel. The employee suffered possible internal injuries.,1
"An employee was found under a pile of racks, pallets, and salt after a rack in the warehouse broke and fell on the employee. He suffered ACL and tibia injuries.",1
"An employee was helping to disconnect a trailer from a truck. The trailer hitch slipped and the trailer fell on the employee's leg, resulting in an amputation from the knee down.",1
"An employee was working on a car that would not start. When he jumpstarted the starter, the car jumped into gear and pinned him between two cars. He sustained a fractured pelvis and two cracked vertebrae.",1
"An employee was running meat through a saw. His metal mesh glove came into contact with the sawblade, which pulled his left middle finger into the saw and caused a partial fingertip amputation.",0
"An employee was driving a concrete mixer truck down a hill. While turning, the truck tipped onto its side. The employee suffered a concussion and a scratched eye from broken glass.",1
An employee was found on the concrete floor on his back unresponsive on 4-15-2020 at 4:00 PM. He had a bump on the back of his head and was hospitalized for a brain bleed.,1
An employee fell in a stairway and was hospitalized.,1
"On April 15, 2020, an employee was using an ethanol filter to make sanitizer. As the employee was using a pump to filter ethanol from one 5-gallon bucket (through tubing and a charcoal filter) to another, the ethanol started to spray out and immediately caught fire. The employee suffered second-degree burns to the face, hands, and arms.",1
An employee was dislodging a paper core that had fallen into a slitter rewinder machine. The employee's right index finger was caught by a belt driven pulley and sustained an amputation.,0
"An employee was discharging a can of belt dressing onto a conveyor belt. The belt's roller caught the employee's left arm, causing a partial amputation to the arm.",0
"On April 15, 2020, an aircraft electrician was retrieving a tool that fell through the grated cover of a two-foot utility trench. While lifting the grated trench cover, he lost his grip. The trench cover fell and his middle finger was caught between the cover and the floor. He sustained an amputation without bone loss to his right middle fingertip.",0
"A temporary employee was attaching ropes to piping coming off an assembly line. As he was positioning a rope on a 42-inch pipe, the pipe rolled and crushed his left hand. His left little and middle fingers were medically amputated.",0
"An employee was putting tension on a conveyor and aligning it at the bacon microwave for the morning startup. While he was steadying himself, his left thumb was caught in an ingoing nip point, resulting in a thumb tip amputation and left thumb fracture.",0
"An employee was using a metal grabber and overhead crane to assemble a chute out of various pieces of steel. The employee had positioned a sheet of steel in a vertical manner and then climbed onto an 8-foot step ladder to remove the metal grabber from the top of the sheet of steel. The metal grabber moved away from the employee, and the employee lost balance and fell to the floor, landing on the right side. The employee sustained a contusion to the right elbow.",1
An employee was forming the end of copper tubing using a swaging/flaring tool when his right ring fingertip was amputated by the tool.,0
"An employee was pulling a tarp off while standing on a 6-foot step ladder when he slipped off the ladder onto the concrete floor, fracturing his left femur. The employee's shoes were wet at the time of the incident.",1
"An employee was using a circular saw to cut a 2x4 when the saw blade came into contact with his right thumb, resulting in a thumb tip amputation.",0
An employee was reaching under a nail table where nail guns are kept when he struck the handle of a nail gun with his head and it discharged a nail into the back of his head. He was hospitalized.,1
"An employee was performing electrical work on a 6-foot step ladder at ceiling height when he fell and impacted the floor. He was hospitalized with a broken wrist, cracked ribs, and head contusion.",1
"An employee was changing the film roller on a winder machine when the employee's left hand was pulled back into the winder, amputating her left middle finger.",1
"An employee was replacing an old fuse cutout in order to install a trip saver. A lightning arrester failed, causing an electrical arc. The employee suffered first- and second-degree burns to the arms and face. He was hospitalized.",1
"An employee was fixing a chain on a piler when the piler was turned on. The employee's left index finger become caught and pinched between the chain and wheel sprocket, amputating the fingertip.",1
An employee was removing an interior wall when he came in contact with copper wire. The back of his hands were burned.,1
"An employee was climbing up a ladder. The ladder slipped from the side of the building and the employee fell to the ground about 10 feet below. He landed on his feet, then tripped over the ladder lying on the ground and fell. He was hospitalized, having suffered a broken left ankle.",1
"An employee had lifted a 15- to 20-pound box of rotisserie chicken and was frying the chicken when he suffered a slipped disk in his back. He was hospitalized, undergoing surgery.",1
"An employee was on a 6-foot step ladder, using a wire cutter/stripper to prepare a wire for reconnection to a light fixture in a drop ceiling. A short-circuit caused a flash of light and the employee fell from the ladder to the concrete floor. The employee suffered two broken ribs on the left side, a bruised left lung, and a contusion, and was hospitalized.",1
An employee suffered a fingertip avulsion while operating equipment.,1
"A truck driver's tractor had begun to roll away from its trailer. The driver was trying to reach it to stop it when his body struck one of the tires. He fell, rolled, and suffered a laceration above the left eye, another laceration on his nose, and hip and pelvis fractures. He was hospitalized, requiring sutures to the forehead and glue for the nose laceration.",1
An employee was installing a single roof panel when the employee slid off the roof to the ground. The employee was hospitalized with a left femur fracture.,1
An employee was closing an elevator walk-on plate. The plate caught the employee's right ring finger resulting in a partial amputation.,0
"An employee was setting up for hot work on a scaffolding platform. He opened the swing gate at the platform entry and lost his grip on the ladder while transferring from the platform, falling approximately 5 feet onto the main deck of the ship. He was hospitalized with a compression fracture to the T2 vertebra.",1
"On April 15, 2020, a nurse was leaving a patient's home when a member of the patient's family attacked and stabbed her multiple times. She suffered damage to the larynx and the phrenic nerve, as well as a shoulder injury and the near amputation of one of her fingers.",1
An employee was moving a 65-foot-long beam with cranes when one end of the beam swung around and pinned the employee between it and another beam. The employee sustained a pelvic fracture that required hospitalization.,1
"An employee was installing a pipeline in a trench. The employee coiled tubing on a spool and was attempting to tie in two pipe ends when the pipe slipped and flexed, striking and fracturing the employee's fibula.",1
"On April 16, 2020, an employee was walking when she tripped over broken down cardboard boxes and fell to the ground, injuring her shoulder. She was hospitalized.",1
"An employee was sitting in the break room when another employee walked over and threw hot soup into the employee's face. The employee suffered burns to the left and right eyes, left cheek, and right nostril.",1
An employee lost his balance while securing lawn mowers on a flatbed trailer. He grabbed one of the lawn mower hoods to prevent himself from falling. The hood flipped up and the employee fell 3 to 6 feet onto his back. He suffered bruising to his back and knees and was hospitalized.,1
"An employee was picking up cases of product that had fallen off a pallet. He tripped over one of the cases and fell to the floor, suffering a broken hip. He was hospitalized.",1
"An employee was operating a forklift while closing a door when the employee's foot slipped off the forklift brake. The forklift continued to travel and the employee's right hand was caught in the door, resulting in a partial hand amputation.",1
"An employee was a passenger in a golf cart when he fell out of the golf cart as it turned to enter the facility. He tried to gain his footing but fell backwards onto the concrete, hitting his head on the pavement. He suffered a skull fracture and subdermal hematoma.",1
An employee had climbed up a fixed ladder on a roof parapet wall to install conduit when he fell 9 feet through the fixed ladder opening to the roof below. He was hospitalized with fractured vertebrate and lacerations to the head .,1
An employee was checking for a hydraulic leak on a piece of machinery when the machinery lacerated one half-inch of his finger.,1
"An employee slipped on recently mopped wet tile in an elevator landing at work, falling to the wet floor and breaking her hip. She was hospitalized.",1
An employee was lifting a cord (angle iron) onto a rigging table when the cord suddenly moved approximately 10 inches and caused amputations to his left ring and middle fingertips. He was hospitalized.,1
"An employee was removing a rack from a hanger. The rack dropped onto his right foot, causing an open fracture, as well as a puncture wound and contusions.",1
An employee was baling cardboard when he fainted and hit his head on the floor. He was hospitalized with a severe head injury.,1
"An employee was acting as a spotter for employees who were moving a boom lift into position when the lift's basket hit a piece of steel, causing it to tip over and strike the employee on the left leg. The employee suffered a lower leg compound fracture.",1
"On April 16, 2020, an employee was on the roof of the first level of a 2-story split-level house caulking the dormers to be painted when he slipped and fell 12 feet to the ground, resulting in a broken right hand. He was hospitalized.",1
"An employee was climbing down a ladder when she missed the last step and impacted the floor, severely injuring her tibia and kneecap.",1
"An employee was operating a standup forklift when he stopped his lift on a shipping dock in front of a door. A sit-down forklift was backing out of the door and hit the employee's leg, pinning it between the two lifts. His left leg had a fractured femur, requiring hospitalization and surgery.",1
"An employee was organizing an area full of part buggies and pushing them to their proper locations. As the employee was pushing a cart, the front side struck another buggy. When this happened, it caused wood stiles inside the buggy to shift, crushing her right middle finger between the stiles and the handle of the buggy and resulting in a fingertip amputation.",1
"An employee was repositioning the print tape that prints labeling on a cable. The tape stuck to his finger when he tried to position it on the cable, causing his finger to get caught between the print wheel and the cable resulting in an amputation injury.",1
"An employee was performing a quality control check when his finger struck against a sharp object in a bean bowl mixer, resulting in a partial finger amputation.",0
"An employee was unclogging the steam line for a lawn mixer. The steam line was not locked out and the steam line valve was not turned off at the time. When the line was unclogged, steam was released, and the employee sustained second degree burns on both arms and hands.",1
"An employee was standing beside a concrete column form, guiding it as a crane picked it up. The rigging came loose and the form fell to the ground, striking the employee on the way down. The employee suffered a left clavicle fracture, a left acetabulum fracture, transverse vertebrae fractures, compression vertebrae fractures, and multiple contusions and abrasions.",1
"An employee was on a ladder installing an electric metallic tube. While attaching the tubing, the employee was startled by a shock and slipped off the ladder, falling to the ground and breaking his wrist. He was hospitalized.",1
"An employee was standing on top of a 4-foot concrete road barrier when he fell and his leg was caught in between another barrier, resulting in a broken femur.",1
"An employee took the plug out of a hydraulic cylinder when the metal arm on the cylinder came down under its own weight and pinched his pinky finger between the two pieces of metal. As a result, his right pinky finger was partially amputated at the first knuckle. The employee was hospitalized.",1
"An employee was framing the scope of work on the roof at the entry of a house. While cutting sub fascia from the entry, he fell 14 feet to the ground, suffering bruised ribs.",1
An employee was moving lumber when his leg was pinned between two bundles of lumber. He was hospitalized with a broken leg.,1
"An employee was feeding a board through a shaper machine when the machine jumped and caught his left middle finger, causing a partial amputation of the fingertip.",0
An employee was un-jamming a slitter machine when the cutting blade cut off his pinky fingertip.,0
An employee was removing a panel to access a fan belt when the employee's left index finger was pinched and fractured between the fan belt and pulley. The employee was hospitalized.,1
"An employee was cleaning a chain on a wire wheel when his hand became stuck on the chain, resulting in a left pinky fingertip amputation.",0
"An employee was manually positioning  a 13-foot long, 460-pound steel I-beam with his hands onto cribbing with the assistance of a forklift when other I-beams stationed on the forks of the lift shifted. This action resulted in the employee having his right-hand middle finger caught between I-beams, which resulted in a partial amputation to his finger.",0
"An employee had removed the conveyor on the backside of a machine to clean. When the employee went to put the machine back in place, the employee's left ring finger was caught in a pinch point created by the lug conveyor chain and the traying machine. As a result, the employee's left ring fingertip was amputated.",1
An employee was loading card stock into a corner-cutting machine. The blade in the machine amputated the employee's left middle fingertip.,0
"An employee was walking to a car to deliver food. She tripped over an uneven spot in the concrete and fell to the ground, suffering a broken ankle.",1
"An employee was hiking over rough terrain en route to respond to a fire. He lost his footing and fell, breaking his ankle.",1
An employee slipped on ice while walking and sustained a fracture.,1
"An employee was cleaning mud out of a concrete footing with a hydroexcavator when the insert from the excavator's rubber vacuum hose sheared off, severing the connection with the dig tubes and causing the dig tubes to fall and strike the employee. The employee was hospitalized with a compression fracture to the back.",1
An employee was unlatching a pin on a tractor when his right hand was caught between the equipment. He sustained a laceration to his right hand requiring hospitalization.,1
"An employee was pulling a box from a shelf when the box ripped. He then fell backwards, hitting an ice machine and then the ground with his right hip. He suffered a right hip fracture.",1
An employee exited his vehicle and was entering the worksite. He slipped on ice in the parking lot and fell sustaining a head injury. The employee was hospitalized for a brain bleed.,1
"An employee was going into a warehouse when he fell, striking and injuring his head.",1
"An employee tripped over a tool box and fell through the back door of a van, suffering a dislocated jaw.",1
"An employee was attempting to position a power cylinder head into storage with an overhead crane. While placing the power cylinder in the bottom part of the rack, the rack shook and knocked off another power cylinder that struck the employee, who suffered broken ribs and a collapsed lung.",1
"The injured employee climbed up a ladder to access the top of a concrete ledge, which was part of the support structure for a furnace, and was standing on the north side of a cylinder as another employee was operating a lift to align the pin on top of the cylinder. A third employee was working a come-a-long to help align the cylinder top. The injured employee was flagging from the platform when he fell approximately 8 feet, landing on the concrete surface below. He was hospitalized with a fractured tibia and fibula in the left leg.",1
"An employee was welding a steel plate onto an I-beam when the plate slipped off and struck his left leg (femur), causing a fracture and requiring hospitalization and surgery.",1
"An employee was in the process of switching railcars in the scrap yard when he slipped and fell from the engine landing beneath the railcar wheel as the railcar was moving. His right leg and left foot were crushed, resulting in a right leg amputation.",1
An employee was descending a structural fixed ladder when the employee lost grip and fell approximately 10 feet to the lower level. The employee suffered fractures to the right and left ankles.,1
An employee was welding from a bucket truck when sparks dropped into the bucket and caused a fire. The employee sustained burns to the legs and back.,1
"An employee fell and fractured her hip, requiring surgery and hospitalization.",1
"An employee was loading boxes onto a trailer. The conveyor belt caught the employee's left middle finger, partially amputating it. The employee was hospitalized.",1
"Employees were drilling a water well. As they were removing a cut-out portion of the well casing from the drill floor, the casing was bumped and shifted, causing it to fall enough to take slack out of the cable. The injured employee had placed his hand on the cable to remove it from the hook and his finger was caught between the hook and the cable. As a result, the distal phalange of his left index finger was amputated.",0
An employee was unloading a vehicle from a flatbed tow truck. The vehicle slid sideways and its frame pinned his arm against the frame of the tow truck bed. His arm was broken and he was hospitalized.,1
An employee was moving a sandblasting hose. It activated and sprayed sand in his eyes.,1
"An employee was unloading doors from a truck when wood molding and building materials fell off the truck and struck his face, causing cuts and lacerations to the face and head. He was hospitalized.",1
An employee tripped and fell during horseplay with other nurses and broke a hip.,1
"An employee was cleaning a rice miller's cooling chamber discharge. The feed screw inside the machine caught his right index finger, amputating it below the nailbed.",0
An employee was using a band saw to cut meat when the blade amputated his left middle fingertip.,1
An employee was up a ladder and on steel beams while lifting box freight when he fell to the floor and landed on his right side. He fractured his humerus in his right arm.,1
"An employee was securing a dead front panel on a panel board when an arc flash occurred, causing second and third degree burns to the employee's hands, arms, and face. The employee was hospitalized.",1
"An employee was walking to the front of a trailer when she tripped over the rollers in the trailer and fell to the ground, breaking her right ankle.",1
"An employee was unjamming a box from a conveyor. The employee's right glove was caught between the conveyor belt and a roller, and the back of the employee's right hand was abraded.",1
"An employee was on a ladder tightening a steam pipe when the steam pipe burst. A piece of the pipe hit the employee on the head, knocking him off the ladder. He hit a piece of equipment on the way to the ground and landed on the concrete floor. He was hospitalized.",1
"A mechanic was notified of a cooling issue on a refrigerator trailer in the fleet. He had just brought the trailer in from the yard and parked in the work bay of the trailer shop to begin the troubleshooting process. While performing the tension checks, the thermostat on the trailer triggered the engine to start. A belt pulled the mechanic's hand into a pulley and his fingers were caught at a pinch point. He sustained an amputation to the left middle finger at the first joint, and an amputation to the left index finger at the base of the fingernail.",0
An employee was loading metals into a loader with a scrap crane when his right middle finger was caught between a crane magnet and the scrap metal and  amputated.,1
"Employees were organizing iron beams with an overhead crane and sweeping the work area when the steel beam tipped over and pinned the injured employee's legs, causing fractures to both.",1
"An employee was showing another employee his gun. The gun fell to the floor and discharged, hitting the second employee in the left thigh. The second employee was hospitalized.",1
"An employee was loading in the top of an open container when he lost his balance and fell approximately 3 feet to the concrete ground, landing on his tailbone and injuring his lower back.",1
"An employee was climbing down from a front-end loader when his foot slipped on a lower step. He fell about 4 feet to the ground below, suffering a broken fibula.",1
"An employee was operating the extruder for polystyrene rolls when a roll snapped. He was feeding the sheet through the rubber rollers that control the tension on the roll when the rolls grabbed his fingers, injuring his right middle and ring fingertips.",1
"An employee was working under a conveyor casing. The casing fell on the employee, breaking the employee's ribs and collarbone.",1
"An employee was using a flat-bladed screwdriver to remove a screw out of a concrete wall in preparation to paint the wall. As he applied force to remove the screw, the screwdriver slipped and lacerated his left arm/wrist area, causing a vascular bleed that required surgery and hospitalization.",1
"An employee was assisting as a crane moved a load. As the crane lifted the load, his finger was caught between the sling and the load, resulting in a fracture and amputation.",0
"An employee was operating a ribbon cutting machine. The machine became jammed with elastic; while the employee was clearing the jam, the machine cycled and amputated the tip of the employee's right index finger.",0
"An employee was on an 8-foot A-frame ladder, cutting sheetrock to attach an electrical terminal box. His elbow hit the terminal box and he was thrown off balance, falling to the floor from about four rungs up. He suffered a dislocated right wrist and a cut from a metal bracelet he was wearing.",1
An employee had been stacking boxes and started having chest pains. The employee was hospitalized and had cardiac related surgery.,1
A maintenance employee was helping move a die that was sitting on a pallet. The die tilted and pinched the employee's right little finger against another die causing a cut that required surgery and hospitalization.,1
"An employee was operating a table saw when the saw's power was cut. His right ring finger made contact with the saw as it was slowing down, and the fingertip was partially amputated.",1
"An employee was moving turf with a walk-behind mower. The mower partially ran over the employee's left foot, lacerating it; the employee was hospitalized.",1
"An employee was standing at the edge of an approximately 48-inch diameter hole that was approximately 18 feet deep. The employee was using a winch cable off the back of a drilling rig with a hook on it, attempting to retrieve a shovel that had fallen into the hole, when he lost his footing and fell approximately 18 feet to the bottom of the hole. He broke his right leg in two places with possible additional injuries to the left leg.",1
An employee was walking from a trailer to an office with paperwork when the employee's knee gave out. The employee fell onto the concrete ground and broke the kneecap.,1
An employee was cutting scrap material with a torch when the material shifted and struck the employee's right foot. The employee sustained a right foot laceration and fracture.,1
"After unloading materials from a flatbed truck, an employee was climbing down from the flatbed truck when the employee fell and suffered a head concussion.",1
"Employees were measuring a vault that was under construction at a new bank location when the vault fell on top of an employee, trapping and crushing her. She suffered multiple bone fractures to her lower extremities.",1
"An employee was attempting to clear an equipment jam when his right index finger was caught between the equipment's roller and drum, resulting in a fingertip amputation.",0
"An employee was attempting to clear what he believed to be a clogged blower chute from the spin trimmer. As he was shaking the chute to clear it, the chute disconnected from the blower unit. He pulled a rolling ladder to the unit and then attempted to reconnect the chute to the blower. His left hand slipped and entered the motor where the impeller blades struck and amputated the fingertips of his index, middle, and ring fingers.",1
An employee was using a sand mixer when the employee's hands entered the mixer. The mixer blade then cut off two of the employee's fingers. The mixer chute was unguarded at the time of the incident.,1
"An employee was cleaning up a job site and throwing a board into a dumpster when he was struck by a sheet of siding that was dropped from a boom lift 20 feet above. He suffered multiple head contusions; abrasions to the head, neck, back, and chest; and fractured ribs. He was hospitalized.",1
An employee was struck on the head and neck by a falling ladder.,1
"An employee was repairing a conveyor belt when it activated. The chain and sprocket caught his fingers, amputating the left index and ring fingers.",0
"An employee was retrieving a tire that had fallen from a truck. While retrieving the tire, the employee was bitten by a water moccasin snake. The employee was then hospitalized.",1
"A temporary employee cleaned a tripper and radioed the operator to restart the machine. The employee was then caught in a rotating shaft, suffering a left shoulder dislocation and left arm fracture that required hospitalization. The guard was removed at the time of the incident.",1
"An employee was climbing down the steps of a bucket truck when he placed his hand on the open tool box and a co-worker closed the tool box lid on his hand. As a result, his right index finger was amputated to the first knuckle.",1
"An employee was installing a gutter from a ladder when he fell 20 feet, striking his head and requiring hospitalization for head trauma.",1
"An employee was shifting a larger timber off of a smaller timber as it was going down the line when his finger was caught between the larger timber and the metal side rail of the line, resulting in a fingertip amputation.",0
"A truck driver was preparing to load his truck, using a lift bar to manually place the dock leveler. As he was guiding the dock leveler plate onto the back of the truck, the tip of his left index finger was amputated in the hinge.",1
"An employee was moving material when his finger was pinched between the handle of a cart and a metal stud, and he was hospitalized.",1
"An employee was cleaning up material near a flight of steps at a jobsite when the employee fell down 10 steps to the ground, suffering a head laceration/injury.",1
"To help move cardboard boxes, an employee used a lift machine to move the pallets storing the boxes. He exited the lift while it was still in motion and his hand was caught between the back of the lift and a yellow bin. He was hospitalized with a broken/bruised right thumb/palm.",1
"An employee was riding on horse back, checking the health of feedlot cattle when the horse lost its footing and rolled over on the employee's leg, breaking the tibia on the right side.",1
An employee had just disconnected a tractor/trailer and exited the truck to put in a support bracket that sits under the nose of the trailer. His tractor rolled backwards and pinned him between the trailer and the back of the tractor. He sustained lacerations.,1
"An employee was attempting to remove an actuator pipe/valve combo that had fallen into a hopper with an auger when his arm triggered a sensor, causing a pneumatic valve to close on his right ring finger and amputate the fingertip. The auger was moving at the time of the incident.",0
An employee was intervening in an argument between two elder care clients when she was accidentally pushed down a flight of stairs. She landed on the sidewalk and was injured.,1
"On April 21, 2020, an employee had just completed preventive maintenance on a conveyor's belt and bearings, and was checking how the belt was tracking, when a powered roller in the middle of the belt caught his right thumb. He suffered a degloving that resulted in a partial amputation of the thumb tip.",0
An employee was coming down an extension ladder from the roof of a building when the ladder and employee fell. The employee suffered a broken left wrist and left hip. The ladder was not attached to the building and was missing feet at the time of the incident.,1
"An employee was helping a crew run a cleaning pig through a pipe running from an oil well into the manifold. During the pig retrieval process, the pig became dislodged by unanticipated vapor buildup and exited the pipe. The vapor burst exited the pipe and the employee was overcome by the H2S vapors.",1
Two employees were lifting a valve when one of them suffered a back injury. He was hospitalized.,1
"Two employees were unloading a truck at a dock; one was driving a standup forklift and the other was driving a high reach forklift. While the standup forklift was backing up, its operator's leg was pierced by the high reach forklift's forks.",1
"An employee was feeding wood into the chipper when a board kicked out and struck him in the left hip, which was fractured. He was hospitalized.",1
An employee was attempting to remove a superstructure from an engine using a crane when the down button on the crane was pressed instead of the up button. The superstructure then amputated the employee's right index finger.,0
An employee was using a motorized drain auger to unclog a machine. A spinning spiral mechanism (which turned the auger) caught his thick leather glove and cut off the tip of his right ring finger.,1
"An employee was cleaning a roll former's tooling with a rag and manually jogged the machine with a remote control. The employee's glove and cleaning rag came in contact with the roll former, pulling his finger between the rolls. His left index finger was pinched and rolled over, resulting in surgical amputation of the finger to the first knuckle.",0
An employee was cutting trees with a chainsaw when the chainsaw lacerated his arm and cut a nerve. He had surgery and was hospitalized.,1
"An employee was taking down or placing chairs in storage while standing on the top platform of a rolling stair ladder when he fainted and fell to the concrete floor. He was hospitalized with a fractured skull, fractured spine, and a broken rib.",1
"An employee was helping a co-worker move some drywall when the drywall fell over and struck him in the leg, resulting in a broken leg.",1
"An employee was attempting to climb into a railcar when he slipped and fell, hitting his face on a roll of paper and injuring his neck.",1
An employee was adjusting the chain on an arm pole when the employee's right ring finger was caught between the pole and its stand and fractured.,1
An employee was transitioning over a precast bed form when he fell approximately 3 feet to the floor below and broke his hip. He was hospitalized.,1
"An employee was contacted by moving parts while cleaning a machine, sustaining severe lacerations to the left hand and fingers. The employee was hospitalized.",1
An employee was removing a wedge from a mill stand guide when the guide shifted and amputated the tip of the employee's left pinky finger.,1
"An employee was troubleshooting a de-energized screw conveyor. While he was manually moving the belt drive, the jammed object came free and the conveyor belt moved and pulled his hand in between the belt and pulley. He suffered a left ring fingertip amputation.",0
"An employee was emptying a tip dumpster into a larger roll-away dumpster with a forklift. When the employee released the lever allowing the tip dumpster's contents to transfer to the larger dumpster, the weight shifted and the employee's left ring fingertip was caught between the tip dumpster and the forklift fork, resulting in a fingertip amputation.",1
"The injured employee was cleaning rollers with a partner when one of the rollers was moved. The injured employee's finger was then pinched between the rollers, breaking a bone in his index finger.",1
"An employee was on a ladder when it slipped out from under him. He fell and landed on the concrete floor, hitting his face and chin and suffering a cracked rib.",1
"An employee was helping with the installation of a brace on a prefab concrete panel when the nylon sling slipped out of the lifting hook, slid down the panel, and the brace struck the employee. The employee sustained head, neck, and back injuries.",1
An employee suffered a herniated disc in his back while lifting a package during a delivery.,1
"The injured employee was moving a stone up one level to another employee on a scaffold, when he lost his balance and fell on the stone he was standing on, injuring his back and hand.",1
"An employee was visiting various construction sites. After parking their vehicle, the employee walked across the road to a construction site and was struck by a car, suffering a broken left femur.",1
"On April 22, 2020, a temporary employee was walking from across an aisle way. A forklift backed into her and ran over her right leg, crushing it. She was hospitalized.",1
"An employee was working on a ladder on top of a truck. While descending the ladder, the employee missed the last rung and fell onto the truck before falling onto the concrete below. The employee suffered a fractured skull and broken finger on the right hand.",1
"On April 22, 2020, an employee was attempting to climb into a jockey truck when the employee reached for the grab bar and missed, causing a loss of balance. The employee fell backwards, striking the elbow on the jockey's steel platform and resulting in a left elbow laceration, torn bicep, and torn tricep, which required stitches, surgical muscle repair, and hospitalization.",1
"An employee was washing out a concrete truck after unloading it. While the employee was spraying down the fins, the hopper of the truck came down onto the employee's left hand, fracturing it. The employee was hospitalized.",1
"An employee was inspecting pieces as they came out of a machine. He went to pull apart the pieces. The punch came down and injured his fingers, resulting in amputations to his pinky finger as well as his middle and ring fingertips.",1
"An employee slipped on tile and fell to the floor, suffering a broken hip.",1
"On April 23, 2020, at 2:40 PM, an employee was performing maintenance under an air handler unit. When the employee stood up, an iron bracket cut the back of the employee's neck.",1
"An employee was climbing a ladder. The employee's foot got caught between two rungs; she lost balance and fell about 3 feet to the ground, suffering a broken right foot. She was hospitalized and underwent surgery.",1
"An employee was stocking shelves using a ladder. While stepping down backwards, the employee fell to the floor, suffering a broken hip or femur.",1
An employee was using a grinder on a metal railcar running board. The wheel on the grinder came off and lacerated his left thigh.,1
"An employee was on a ladder, installing new security cameras on a university building. He fell from the ladder to the ground 15 feet below, striking his head. He was hospitalized, suffering from brain bleeding and lung bleeding.",1
"An employee slipped and fell down a staircase, breaking one finger.",1
"An employee was pushing a two-wheeled cart carrying a 55-gallon drum. The cart slipped and pressed the employee's left little finger between the cart and the wall, causing the amputation of the fingertip.",0
An employee fell from the top of a ladder while checking a new property. The employee struck the ground and suffered a dislocation to the foot.,1
"An employee slipped while walking down stairs, falling and breaking his leg. He was hospitalized and underwent surgery.",1
"An employee was helping a crane operator retrieve a roll from a storage rack. The employee was working on the west side of the rack and the crane operator was working on the east side of the rack. The employee's hand was resting on the end of the roll. When the operator lifted the top roll, the other roll moved, pinching the employee's left hand and resulting in amputations to the left pinky and ring fingers.",0
"An employee was moving a cart when the employee slipped on a mat and fell, breaking the right femur.",1
"On April 23, 2020, at approximately 8:25 p.m., an employee was adjusting the position of a conveyor belt. He grabbed the belt with both hands in order to pull the belt over. As he was pulling the belt over, the fingers on his left hand were pinched between the belt and roller, amputating his left ring fingertip and fracturing his left middle finger.",0
An employee was cutting trees when a branch fell on him. He suffered broken ribs.,1
"An employee was standing on the fork of a forklift 2 feet off the ground pulling on shrink wrap when he slipped and fell to the ground, fracturing his hip.",1
"An employee had unloaded a tracked drill rig off of a trailer and started to drill when the employee's pant leg became caught in the drill auger. As a result, the employee suffered a fracture to the left fibula with contusions and a hematoma, requiring hospitalization.",1
"An employee was attaching an elevator to a column pipe when the elevator slid up to the lifting lug, smashing the employee's right pinky finger. The employee's finger was partially amputated.",0
"Two employees were troubleshooting a variable-frequency drive. As one of the employees was removing the wires from the bottom of the control disconnect, a wire touched the frame of the drive, causing an arc flash that burned the employee's right hand and face.",1
"An employee was retrieving an item from a machine. A sharp object in the machine cut the employee's hand near the thumb, causing an injury that needed stitches.",1
"Two employees were taking cross-braces off a shoring tower and handing them to a third employee at the base of the frame. They were working from the top down, and had removed the braces from the top two sections; as they began to remove the braces from the bottom section, the tower tipped over and landed on the employee on the ground. The employee suffered three broken vertebrae and three dislocated vertebrae in the back.",1
"A millwright was doing preventive maintenance on a cooling wheel that was locked out. The failsafe brake malfunctioned, causing the wheel to turn and strike him. He suffered a broken left arm, a broken left leg, and broken ribs and was hospitalized.",1
"An employee lost his footing and fell to the ground while climbing down an 8-foot ladder, fracturing his arm.",1
"An employee was trying to unclog a flux system when his hand entered a valve that was activated, resulting in amputations to three fingertips on the right hand just below the fingernail.",0
"An employee was using a drill and paddle bit to drill holes in a plywood form, which was lying on the ground. While drilling, he hit a can of spray adhesive, causing a fire that burned his hands, arms, chest, and head. He was hospitalized.",1
"An employee was repositioning a patient using a draw sheet with another technician when she experienced pain due to a severe back sprain, requiring hospitalization.",1
An employee had just serviced a generator. The employee was removing a rag when the generator's fan blade cut off the tip of the employee's left index finger.,0
"An employee was hauling granite on a flatbed truck and stopped at a truck stop for a routine check of the load. The employee noticed one of the chains was becoming loose and used a snap binder to secure the load. The employee went up on the flatbed to tighten the chain when the snap binder snapped back up and hit the employee in the face, causing a fractured skull and brain bleed. The employee was found unconscious on the ground.",1
"An employee was applying coating to a weld at a pipe joint when an adjacent pipe shifted, pinning the employee against a second pipe. The employee sustained fractures to his rib cage and tailbone along with bruising to the right leg.",1
An employee was operating a trench machine when he took the cap off a radiator and was sprayed by hot anti-freeze. He received burns to the left thigh and left arm and fractured his ankle when he jumped off the machine.,1
"An employee was pulling a part out of a reamer machine when his thumb was pulled into the machine, resulting in a partial thumb amputation.",0
"After pulling a pallet jack with a pallet 2 feet away from his workstation, an employee walked backwards and tripped over the pallet, breaking his left leg in two places.",1
An employee was attempting to remove a splintered piece of wood debris that was stuck at the feed inside a molder machine when a spinning profile cutter removed a deep chunk from his right index finger.,1
"On April 23, 2020, an employee was operating a demolition saw at a construction worksite. On April 24, 2020, the employee was hospitalized for a ruptured aorta and required surgery.",1
"An employee was setting up to sanitize a production line when her rain jacket hood was caught by a moving shackle, pulling her down to a drip pan where she struck a support post and then fell 4 or 5 feet to the ground. She suffered an internal laceration to her liver.",1
"An employee was troubleshooting a new conveyor. While he was sitting on it, two of its wires were reconnected and the conveyor activated. He traveled on the conveyor for about 6 feet; a cross brace struck his back, injuring it.",1
An employee was chipping at some concrete stuck in an I-beam when the I-beam swung out and smashed his right index finger. He was hospitalized.,1
"An employee was lowering an aluminum mullion from a rack. It slipped and his left ring, middle, and index fingers were crushed against the ground. He suffered fractures and was hospitalized.",1
"An employee working on cabling was shocked by a 277-volt exposed wire in the ceiling, burning the third and fourth fingers.",1
"An employee fell off the deck of his rollback truck while climbing up to get his winch cable, striking his head on the ground.",1
"An employee was working near a dock operating a forklift. He was reaching for paperwork when he lost control of his forklift and it struck the dock, injuring his foot.",1
"An employee was walking to an assigned work location when the employee slipped and fell to the ground, suffering a broken ankle.",1
"An employee was changing a blade on a sawmill module. His glove got caught and pulled off, and the blade amputated his left ring fingertip.",0
"On April 25, 2020, at approximately 2:00 a.m., an employee was being trained to use an electric  pallet jack (PIT). While going in reverse, he lost control of the electric pallet jack and let go of the arm. As he let go of the arm, he stepped off the jack and his left leg was pinned against a rack. He suffered a lower left leg fracture.",1
An employee sustained second degree steam burns to his upper right arm and right torso while operating a steam hose on a railcar.,1
"An employee was removing a piece of plastic from a conveyor line when her right hand was caught between the conveyor roller and a nip point, resulting in a right ring fingertip amputation.",0
"On April 25, 2020, at approximately 6:15 a.m., an employee was inflating a dismounted tractor-trailer tire on the interstate when the single piece wheel rim was ejected from the tire and struck the employee in the head. The employee sustained face and head injuries.",1
"An employee was working in a COVID-19 unit, and accordingly was wearing full PPE during her shifts on April 25 and April 26, 2020, including an N95 mask. She felt itching on her forehead and around the mask on April 25, then developed swollen eyelids and hives to the face, trunk, and legs on April 26. She became short of breath at home on April 28 and was hospitalized, suffering from diffuse urticaria and dyspnea, possibly from the mask.",1
An employee was driving a forklift in reverse when the forklift struck a support beam from the left side. The employee's left foot sustained injury which required surgery and hospitalization.,1
An employee was operating a landscaping vehicle when it flipped over. The employee's arm/hand was caught between the vehicle and a tree.,1
An employee was cleaning the chain on a foil machine. The chain caught the employee's right glove and amputated the employee's ring and middle fingertips.,0
"An employee was moving a tote when she tripped on a dolly and fell, breaking her left leg and requiring surgery.",1
"An employee was cleaning apple packing equipment when the employee's right thumb and fingers were caught in the machinery, resulting in an amputation of the right thumb tip and fractured fingers.",1
"An employee was trying to remove a T-post fencing stake using a stake remover tool. While using his body weight to push down on the lever, his leg twisted and broke. He was hospitalized, requiring surgery.",1
"An employee was stepping over a caution tape barrier when she tripped over the barrier and fell, fracturing her left shoulder and upper arm. She was hospitalized and had surgery.",1
An employee was cleaning the coater pan of a press oven when the employee's gloved hand became caught between two moving rollers on the machine. The employee's left pinky and ring fingers were amputated.,0
"An employee was cleaning the work area when his arm was injured in a piece of equipment, sustaining lacerations.",1
"An employee was installing a satellite dish. The employee fell off a ladder to the ground about 5-6 feet below, suffering a contusion.",1
"A nurse was attacked by a patient in a care unit. She suffered a cut to the forehead, a bruised elbow, eye injuries, and injuries to the head area and was hospitalized.",1
"An employee was working in a steel trench box (about approximately 10-12 feet deep), spreading rock at the bottom of the trench and waterline pipe. A pipe struck the employee as the employee was working in the trench and fractured the employee's pelvis.",1
"An employee scraped a hand on a bent safety steel slat while stocking, receiving a laceration that required surgery.",1
An employee was carrying a 6-foot-long and 5-inch-diameter pipe filled with dirt when he tripped into a 2-foot-deep ditch. He fell on top of the pipe with his hand between the pipe and ground. He sustained a fracture to his right hand that required surgery.,1
An employee was lifting a mold block using an overhead crane. The block broke the employee's left arm and crushed the employee's right arm and hand.,1
"An employee was on a deck delivering a package. He jumped onto a bench to get away from a dog, then lost his balance and fell from the deck to the ground, suffering broken ribs.",1
"An employee was cutting up a felled tree with a chainsaw. The chainsaw got stuck and the employee turned it off. Another employee stepped between the tree and another tree, pushing down the tree with the chainsaw stuck in it. The tree freed itself from the stump and hit the employee's left knee, fracturing and dislocating it.",1
"An employee was stocking merchandise from a step ladder or a rolling staircase when he missed a step and fell to the floor, injuring his left hip. He was hospitalized.",1
"An employee was walking in a hallway, when she scuffed her foot, lost balance, and fell on her left knee, fracturing her patella.",1
"An employee was found laying on the ground with a broken rib, concussion, and laceration above his eye, potentially as a result of a fall from a ladder. He was hospitalized.",1
"At about 6:50 p.m. on April 27, 2020, an employee fell off the end of a product picking location and landed in netting. The employee suffered a lacerated right shin that required surgery.",1
"An employee was moving a surgical laser machine to a different location when the fingers of his right hand were caught and crushed between the machine and a door frame, resulting in the surgical amputation of his right small fingertip.",0
An employee was guiding a telehandler forklift with a sheet of steel attached. The employee slipped and fell and the forklift's tire amputated the employee's left foot.,1
"An employee was using an industrial sewing machine to make slings. The presser foot rose while the employee's finger was in the path of the metal channel, and the employee's left middle finger was amputated.",0
"Three employees were trying to set up a concrete silo mixing plant and had the silo lifted on a forklift. The back legs on the silo needed to be adjusted to level out the silo. The legs were stuck, so the forklift was tilted forward to try and force the legs free by lowering it onto the ground. The silo slid forward and struck the employees, one of whom suffered a fractured leg and was hospitalized for surgery.",1
An employee was walking in a warehouse when her leg was caught in plastic wrap. She fell and fractured her tibia.,1
"An employee was storing a golf cart that was not working. He attempted to accelerate the cart to get it going again. The cart was in reverse instead of neutral at the time and went backward. The cart's belt then pulled his finger toward the engine pulley, cutting and amputating his index fingertip.",1
"An employee was unloading materials onto a roof when the employee slipped and fell off the roof. During the fall to the ground, the employee's head hit a trailer, resulting in a fractured skull and injuries to the nose, mouth, teeth, jaw, ear, and left shoulder. The employee lost consciousness and was hospitalized. Fall protection was not worn at the time of the incident.",1
"An employee was oiling a product chain during routine preventive maintenance when his hand was caught between the chain and sprocket, resulting in ligament and nerve damage.",1
"An employee was working near a cart with a concrete stair tread on it. The cart tipped over and the stair tread fell, slid down the employee's leg, and landed on his left foot. His little toe was crushed.",1
"An employee was unjamming and realigning steel bars on a bar straightener. Her left hand was caught between a steel bar and a roller, and the middle fingertip was amputated.",0
"An employee was helping a driver load pipes onto a transport trailer when a pipe rolled and wedged his left thumb, resulting in a thumb amputation.",0
"An employee was repairing a leak on a barge. After repairing the leak, the employee was working overhead when fire/slag from a welding torch's oxygen line fell on his glove, igniting and burning his left hand and forearm. He was hospitalized.",1
"An employee was exiting a farm tractor when the wind blew the door closed on his finger, smashing and amputating his fingertip.",0
"On April 27, 2020, an employee was walking in a canyon adjacent to the road while performing orientation training and was bitten by a rattlesnake. The employee was hospitalized.",1
"On 04/27/2020, at 10:52 a.m., an employee was cutting a palm tree with a chainsaw when the chainsaw kicked back and cut his left wrist. He had surgery and was hospitalized.",1
An employee was dismounting a powered industrial truck. The vehicle went into reverse and injured the employee's foot and ankle.,1
"An employee was working on a marine engine with a rag in his hand. A belt pulled the rag, which then pulled his right index finger through the pulley. This caused the amputation of approximately half of the finger.",0
"A temporary employee was picking up trash in a ditch. He tripped on a rock and fell to the ground, suffering lacerations to the elbows and hands, as well as a strain and pain in the knee.",1
"An employee who had been operating an excavator reported experiencing a headache, increased heart rate, and chest pains. The employee was hospitalized.",1
"On April 27, 2020, at 12:30 p.m., an employee began rolling the rubber sheet coming out of a press machine onto the electric roller when his left hand and arm were pulled into the rubber roller on the press. He was hospitalized with left arm fractures.",1
"An employee was sanitizing shopping carts in front of a building. She fell from a cement curb, suffering injuries to her left leg. She was hospitalized.",1
"An air-powered muntin bar knocker (used to cut, shape, and notch glass) amputated an employee's finger.",1
"At about 1:00 p.m. on April 28, 2020, an employee was checking a sulfuric acid railcar to ensure that it was empty before it was sent offsite for cleaning and decommissioning. The employee loosened the railcar's dip tube cap with a pipe wrench, then removed it. Residual pressure in the railcar sprayed about 4 pounds of acid into the employee's face, causing chemical burns to the employee's forehead, cheeks and nose.",1
An employee was cutting meat with a saw. The blade amputated the tip of his left pinky finger.,0
"The injured employee was loading books into a gondola from a protected hydraulic tipper and transporting the gondola to a staging area with the assistance of another employee. While putting the gondola bin in the staging area, the injured employee removed his hand from the handles and placed them on the top rail. His right pinky finger was then caught and pinched between the bin on his gondola and a second gondola's bin. As a result, the employee's right pinky finger was amputated at the top joint.",1
A volunteer collapsed at work and was hospitalized.,1
An employee was attempting to clear a clog in an auger-driven material transfer line when the employee's fingers were contacted by energized/moving parts. The middle and ring fingertips on the right hand were amputated.,1
"An employee was bolting a support leg onto the bottom of a trailer. The front of the trailer was lifted slightly in order to insert the leg mounting bracket into position under the trailer mounting bracket. Once in position and after being lowered, the two brackets can be bolted together. The employee's left hand was on the back side of the support leg and his thumb tip was amputated in a pinch point between the two brackets while the trailer was being lowered.",0
An employee was carrying a stack of cardboard when he tripped over a pallet and fell to the concrete floor. He suffered a broken elbow and was hospitalized.,1
"An employee was using a lift to paint a ceiling beam when he was caught between the lift and the beam, suffering crushing injuries.",1
"An employee was on a ladder using an air hose to blow off a break tank when the employee fell from the ladder, suffering a hip injury.",1
"An employee was performing maintenance on a tie jig (equipment that grabs railroad ties) which was connected to the bucket of an excavator. After performing some repairs underneath the tie jig, the employee crawled underneath the other side of the tie jig to make a final repair and was crushed by the tie jig. The employee was hospitalized with a broken sternum and broken ribs.",1
"An employee was cleaning a vent within the building and as he was descending a ladder, he fell from the ladder to the floor below.  He sustained a broken clavicle and broken ribs and was hospitalized.",1
"An employee was standing inside a man basket assisting with a line washing task at a well head tree when he was struck on his right leg (shin area) with pressurized water, sand, and shale from the well head tree flow line. He was hospitalized with a broken right leg, requiring surgery.",1
"An employee was freeing a stuck pulley belt on an auger. The belt took off and pulled the employee's hand into the pulley, amputating a fingertip up to the first knuckle.",0
An employee had just removed the bands on a pallet of siding when the stack of siding tipped over and landed on his leg. He suffered a fracture above the ankle.,1
"An employee was installing wire lath on the side of a house when he fell off a ladder onto the edge of a dumpster, injuring his back. He required back surgery and was hospitalized.",1
"An employee was starting up a reel on a wire packaging machine when a loop in the wire wrapped around his pinky finger. As the reel was turning to wrap around the drum, the loop tightened around his pinky finger and lacerated it, resulting in a pinky fingertip amputation.",0
"On April 28, 2020, a temporary employee was operating the brownie mix sifter in the layer packaging department. The sifter became clogged with the brownie mix product at the sifter beat screw housing. The employee's left hand fingers were caught in the rotating auger while unclogging the sifter severing the fingertips.",1
"An employee fell from a two-story roof to the ground while conducting an insurance inspection, suffering injuries to the head, neck, back, and left leg and a brain bleed.",1
"An employee was guiding/lowering a Kelly hose off to the side of the work floor with a winch line when a counterweight slid down the winch line and struck the employee's left hand, causing an open fracture that required hospitalization.",1
"At 7:15 AM, an employee was operating a refiner and was on the operation control end with his hand on the quick-release lever. The lever was in the up position when the quick release became disengaged and the lever came down on the employee's hand with force. The lever amputated his left thumb just above the second knuckle. He was hospitalized.",1
"An employee was operating a continuous vulcanizing line, which extrudes rubber jacketing around a conductor cable and uses an indent printing process to label the cable. The indent printer housing had a steel cap on the side; the employee had just tightened this cap into place and was making adjustments on a panel when steam pressure ejected the cap into his abdomen. The cap knocked the wind out of him and he suffered first- and second-degree burns from the steam. He was hospitalized.",1
"An employee was using a paint scaffold to reach boxes on an industrial shelf about 6-feet 4-inches high. A metal frame caught his foot, causing him to trip and fall onto a pipe. He suffered a broken pelvis, broken ribs, and a collapsed lung.",1
"An employee was standing next to concrete forms when a crane operator began lifting the forms. The pile of forms shifted and the employee's finger was pinched between two forms, resulting in a fingertip amputation.",0
"An employee was loading a curtain trailer when the employee slipped on insulation and fell backward off the trailer. The employee fell 4 to 5 feet, suffering a fractured right arm that required surgery.",1
"An employee was climbing down a 6-foot step ladder. At the last step, he fell to the concrete floor and sustained a hip fracture and a concussion.",1
"An employee tripped over a speed bump in a parking lot and fell, suffering a broken right elbow.",1
"An employee climbed 5 feet up a 10-foot ladder to tighten a coupler bolt when the employee fell to the ground, suffering a back injury with fractured vertebrae.",1
An employee was lifting a hollow structural steel rib for a dome when a hollow steel section broke off and struck the employee. The employee was hospitalized with a concussion.,1
"An employee was working from a scaffold, installing a beam clamp. The employee fell 5 feet to the ground, suffering three broken ribs as well as head and ear lacerations from his hard hat.",1
An employee was heading out of the office and down the stairs to begin her shift at the gate. It was stormy with heavy winds at the time. She stepped out onto the landing and shut the door when a gust of wind caused her to lose her balance and fall down the stairs. She was hospitalized with a possible concussion and a fractured coccyx.,1
"An employee was unboxing a crate of glass. When the side of the box was opened, the product fell out and caught the employee, crushing his hip.",1
"An employee was on a loading dock lowering the door of a refrigerated trailer when the trailer door rapidly closed on the employee's left index finger. The employee's finger was pinched in the door, resulting in a partial left index fingertip amputation.",0
An employee lost consciousness while splitting lumber on a resaw. His right elbow got caught in the blade and was cut.,1
"An employee was labeling clothing using heat transfer labels. She smelled a chemical smell, then felt dizzy and weak, and experienced numbness on her left side.",1
"An employee was installing a drainage pipe in a trench when the dirt trench walls collapsed on the employee, who suffered a broken pelvis and hip.",1
"The injured employee was helping another employee move dunnage with a forklift when the dunnage slipped off the forklift and struck the injured employee's right jaw, breaking it.",1
An employee suffered a right-hand finger amputation while operating a drill press.,0
"An employee was laying pipe in a trench when a chunk of dirt/mud rolled into the trench box and onto the employee, who suffered a broken leg.",1
"An employee was using a press to bend a piece to a 90-degree angle. When the die came down, the piece did not bend 90 percent as it was supposed to, so the employee lifted the die, held the piece with both hands, and activated the press with the foot pedal. The press die then amputated the employee's thumbs from the middle of the nail to the tip.",1
"An employee was parking a powered industrial truck (PIT) when he noticed that the left tine was not aligned properly. He turned off the truck with the tines elevated in order to reposition the tine so that it could be securely lowered to the ground for the evening. The truck was parked over an unused metal PIT attachment. He grabbed the horizontal section of the tine with his right hand and as he began to place pressure on the tine to move it toward the center, the tine dislodged from the carriage and fell onto the metal attachment below, crushing the middle and ring fingers on his right hand. As a result, he suffered amputations of the fingertips of the third and fourth distal phalanges on the right hand (above the nail bed).",1
"An employee was holding a knife in his right hand to debone a poultry thigh when the knife suddenly slipped from his right hand. As he attempted to catch the knife, the tip of the blade made a small cut on the right side of his lower abdomen.",1
"An employee was going to dispose of a piece of plate/liner material. She placed the plate/liner on the floor and later stepped on it, causing her to slip and fall to the floor. She fractured her hip and was hospitalized.",1
An employee was off his forklift when another forklift ran over his foot. He suffered a severe crushing injury to his left foot and a cut to his left shin.,1
"An employee was attempting to clear a jam on an extruder machine when the employee's hand came into contact with a rotating valve, resulting in the amputation of four fingers.",0
"An employee was working around a can line conveyor when his left leg lower extremity made contact with a metal bracket mounted to the can line conveyor, resulting in a laceration to his left Achilles tendon. He was hospitalized and had surgery.",1
"An employee was standing 8 to 10 feet up on a ladder inside a water tank applying tank coating when the employee fell to the metal bottom of the tank. The employee sustained fractured vertebrae, broken ribs, and a punctured neck.",1
An employee lifted the tongue of a generator to move it when his finger was caught/pinched between the jack and tongue. This resulted in a partial amputation of the right index fingertip.,0
"An employee was taking down the canopy over a walkway. When he stepped on a brace on the canopy, it gave way and he fell approximately 10 feet to the ground below. He suffered a fractured skull with intracranial bleeding and a T12 vertebra burst fracture.",1
"An employee was in a lift removing a window about 30 feet above ground. The lift got close to an FPL wire and a power surge shocked the employee, causing injuries including a leg amputation.",1
An employee was leaning over a propane grill to light it through the cooking grates when the flames jumped and burned the employee's face and arms.,1
An employee was conducting welding operations on a spot welder when the machine cycled and partially amputated the employee's right index finger.,0
"An employee was moving a parts table with two pallets stacked on top of each other when a pallet shifted, causing the employee's fingers to be caught between the two pallets. As a result, the employee sustained a left middle fingertip amputation.",0
"An employee was removing a wooden pallet from the second level of a metal angle rack when the next pallet came forward. The employee's thumb was caught between the metal rack and the wooden pallet, resulting in a right thumb amputation.",0
An employee was pressing meat into the glide toward the blade on a meat band saw when his left hand slipped and went into the saw blade. The employee suffered an amputation of the left pinky finger.,0
"On April 29, 2020, at 12:45 PM, an employee was walking to the back store room to check the level of the anti-freeze drum. Less then a minute later, an explosion occurred in the building. Two employees ran to the back room and found the employee with face and neck burns and singed hair. He was hospitalized.",1
"On April 29, 2020, a pilot driver for an oversized load that had been transported from Texas was struck in the legs by the decking of the trailer that had been used to transport the oversized load. When a crane attempted to lift the decking at its destination in Florida, the load shifted and struck the pilot driver in the legs causing a fracture. The employee was hospitalized.",1
"An employee was working at a customer's address to troubleshoot an in-channel frequency response issue. The employee was preparing to check radio frequency levels at the tap located on the strand next to a wood utility pole at the end of the customer's concrete pad driveway. He set up his 28-foot extension ladder onto the wood utility pole and began his ascent. He ascended the ladder to about the 13th or 14th rung and was reaching for his fall restraint lanyard to secure himself and the ladder to the pole when the pole began to break at its base. He fell from the extension ladder from a height of approximately 13 or 14 feet and contacted the concrete pad driveway below, landing on the side of his body and suffering fractured ribs.",1
"An employee was cutting metal with a small handheld grinder when his hands flinched, which caused the tool to come toward his face. The rotating disk severed the left side of his lip and his face below the eye. He was hospitalized.",1
"On 4/30/2020, at approximately 2:00 PM, an employee was delivering mail to residents when he stepped backwards onto a stone or brick that came loose and twisted his left ankle. The employee then fell to the ground, suffering two fractures and a dislocation of the left ankle. The employee was hospitalized and had surgery.",1
"At 2:15 PM on April 30, 2020, an employee was unloading a bushing from a flatbed trailer. He was lifting one side of the bushing to place a lifting strap under it. As he lowered the bushing, it pinched his finger against the bushing that was beneath it, resulting in the amputation of his right index fingertip to the first knuckle.",0
"An employee was using a jib crane to position a beam onto a workhorse when the beam struck a second beam, causing the second beam to fall to the floor. The beam, which weighed 644 lbs., fell on and crushed the employee's left foot.",1
"An employee was helping a loader operator transfer catalyst from a bin into a roll-off box when the bin came off the loader's forks and fell on the ground. The employee was standing next to the bin when it fell and attempted to get out of the way, falling down in the process. The employee sustained left and right knee injuries.",1
"An employee was operating a handheld grinder while grinding a patch on a silo to finish repairs when the disc shattered and fragmented pieces embedded into his left forearm, causing two lacerations.",1
"An employee tripped on a cash register cord and fell to the floor, suffering a broken right arm.",1
"An employee was approximately 36 inches up on a ladder removing conduit from beneath a catwalk when the base of the ladder kicked out. The employee fell to the floor and suffered a displaced fracture to the right humerus, requiring hospitalization.",1
"An employee was using a forklift to empty a dumpster into a roll-off container when slack in the lift chain caused the forklift's mast to fall. His left thumb was caught between the mast and the dumpster, resulting in a partial left thumb amputation.",0
"An employee was on a ladder at a customer's house, dropping a new cable line. The cable moved and knocked the employee off the ladder to the ground. He suffered a broken right arm near the wrist, as well as a concussion.",1
An employee was lifting a case of bottled water when she felt a sharp pain in her abdomen. She was hospitalized and required surgery for a hernia.,1
"An employee was operating an oil pump machine when his right index finger was caught between the machine's chain drive and gear, resulting in amputation.",0
"An employee was clearing a clog of sawdust on the discharge side of a sawdust collection unit when his hand was contacted by the impeller, resulting in an amputation to the left middle finger and hand lacerations.",0
"At about 9:30 p.m. on April 30, 2020, an employee was cleaning a conveyor belt on a tomato slicing machine. His left glove got caught in the conveyor gear on the left side of the belt, resulting in the amputation of his left middle fingertip. The belt was running at the time of the incident.",0
"An employee slipped and fell from a standard mower. His left foot was caught under the mower, against the concrete, and his tibia was broken at the ankle.",1
"On April 30, 2020, an employee was removing torque rods from a truck tractor using a 25-pound sledge hammer when the sledge hammer struck his left third finger, lacerating it and requiring surgery and hospitalization.",1
"An employee was attempting to manually open an overhead garage door when the cables on which the door ran, snapped, causing the door to come down on his hand. He suffered a broken hand, requiring surgery.",1
An employee was getting ready to conduct framing operations on the third floor when he removed the floor cover and fell approximately 26 feet through to the ground level. Both of the employee's ankles were fractured.,1
An employee was operating an industrial vacuum machine when his right arm was pulled into the end of the hose while he was reaching down to pick it up. He experienced arm swelling that required hospitalization.,1
"An employee was directing an excavator operator who was backfilling on the downhill side of a retaining wall when the operator disengaged the hydraulic control. The employee was then struck by the excavator bucket or mud, suffering a fractured leg.",1
"An employee was unchoking a friction washer system. He climbed on the floater table, which is 50 inches from the ground, and placed the lid back on the friction washer. As he was climbing back down, he slipped and his left leg fell into the auger, resulting in the amputation of the left leg above the knee.",0
"An employee was inspecting rooms in a house under construction when he opened an elevator access door thinking it was a closet. He fell four stories down the elevator shaft to the cement floor, suffering leg and spinal fractures. He was hospitalized.",1
"An employee was cleaning the inside of a tanker truck and passed out, requiring hospitalization.",1
"While working in a space to unclog a sewer line, an employee became hot, dizzy and nauseated, requiring hospitalization.",1
An employee was working on top of a 4-foot scaffold installing plastic trim when he lost his balance and fell on ceramic. He was hospitalized for internal bleeding.,1
An employee was struck by a forklift.,1
"An employee was in a trench box (near the ladder, about 5 feet inside the box) when a large boulder of dirt fell immediately outside the box. Some of the dirt rolled into the end opening of the box, striking the employee on his heel as he tried to get away and knocking him down to the ground. As he fell, his head struck a T-valve, resulting in contusions to his head and face area. He was hospitalized.",1
An employee was operating an edge bander. The moving saw blade partially amputated the employee's little finger.,0
"An employee was operating a double-length walkie rider pallet jack. While turning into a lane, the pallet jack struck a support beam; the employee was thrown off and fell 3 feet to the floor, suffering a broken hip.",1
"An oil/gas well employee was pushing down on a liner washer tube with a pin. The pin slipped, and the employee's right thumb was caught and smashed between the piston and the liner. The employee suffered a partial amputation to the thumb.",0
"An employee lost his balance and fell from a 3-foot A-frame ladder, breaking his leg.",1
An employee was setting a piece of equipment down on a stand. The employee's right middle finger was partially amputated by the stand and the equipment.,0
"A door caught an employee's left hand, causing the amputation of the tip of the index finger.",0
"An employee was leaving a room when the door closed on his left index finger, amputating the fingertip.",0
"An employee was adjusting a forklift's fork extender chain. The chain lacerated three fingers on the employee's right hand. He was hospitalized, undergoing surgery.",1
An employee was cleaning out a cement mixer when it caught and broke his left hand.,1
"An employee was using a measuring tape to measure an aluminum log on a conveyor. The conveyor started while the employee's hand was between two of the logs, crushing his fingers and resulting in the surgical amputation of his left middle fingertip.",0
"An employee was pulling a set of skate rollers when she tripped over a pallet jack and fell to the floor, breaking her hip.",1
"An employee was trying to raise a trailer's lift gate. The gate was lowered and crushed the employee's right middle finger. The fingertip was medically amputated at the first knuckle on May 2, 2020.",0
"An employee was torqueing bolts with a hydraulic torque wrench inside a wind turbine. The employee was reaching to clear plastic debris from between the bolt and the wrench when the wrench actuated, crushing his right little finger and ring finger. He suffered an amputation to the little finger (6 millimeters from the nail); the injury to the ring finger required stitches.",0
"An employee was trying to de-burr a piece of metal with a grinder. The tip of the employee's left middle finger was caught between the part, the table, and/or the sanding disc, causing a partial amputation of the fingertip.",0
"An employee was welding a 2,200-pound steel I-beam from a sitting position. The I-beam rolled off the sawhorses supporting it and fell on the employee's legs, breaking them both below the knee.",1
"During an altercation, an employee picked up another employee and slammed that employee to the ground, breaking the employee's leg.",1
"An employee was attempting to retrieve a small stack of pallets using a front rider pallet jack. As the employee was reversing to exit the rack storing the pallets, the pallet jack’s front lift control box caught on a rack beam. The employee’s left index finger was caught between the lift box and the rack beam, and the fingertip was amputated.",0
"An employee was working on a blow mold machine. While he was cleaning out a mixing/blender cylinder, the mixer lacerated his arm. He was hospitalized.",1
An employee was washing out a paint filling machine. The filler head's automated valve closed on his left middle fingertip. About an inch of the finger was amputated.,0
"An employee was on an extension ladder, using a caulk gun to service a customer's leaking window. He fell from the ladder to the ground and suffered a broken wrist, six broken ribs, a broken knee, a broken septum, and various other cuts and contusions.",1
"On May 1, 2020, an employee was stepping down from a 4-foot ladder when he lost his balance, jumped from the ladder and landed awkwardly on the ground, breaking his right leg. He was hospitalized.",1
An employee was doing electrical work at a remote worksite. The employee came into contact with a downed primary electrical wire and was shocked. The employee suffered hand injuries and was hospitalized.,1
"An employee was re-taping a large irregular package. The employee's right hand was caught between the package and the package cart, causing two broken fingers. The employee was hospitalized.",1
"An employee was holding a rope that was wrapped around the base of a tree trunk to lower a limb.  The rope was slick due to inclement weather conditions and slipped out of the employee's hands.  The limb started to fall, pulling the rope and causing it to unwind around the trunk. The rope struck the employee in the left eye, requiring hospitalization.",1
"An employee was picking up a stack of pallets with an electric jack. His hand was caught between the jack and the warehouse racking, causing a partial amputation of the left ring finger.",0
"On May 2, 2020, an employee fell from the back of a golf cart as the cart went around a curve. His head struck the pavement; he suffered a concussion and was hospitalized.",1
"A metal chip used to test the metal detector had fallen off the conveyor. As an employee reached to retrieve the metal chip, her cotton glove was caught by a sprocket. Her arm and hand were pulled around the bar attached to the sprocket. The employee was hospitalized and had surgery on her wrist.",1
"At 4:00 p.m. on May 2, 2020, an employee was hooking a chain that connected an H-pile to a crane block. The crane started lifting the pile, and the employee's right index fingertip was pinched in the chain. The fingertip was amputated.",0
"At 5:16 a.m., a convenience store manager was forced into the store at gunpoint, then shot, suffering a leg injury.",1
"A driver got into an altercation with a citizen while on the road and was injured, suffering from concussion-like symptoms. The employee was hospitalized.",1
"An employee fell from a ladder to the floor below while restocking shelves, injuring the left wrist.",1
An employee was standing behind a concrete pump truck when the piping system failed and swung into the employee's legs. The employee suffered a broken femur.,1
"On May 2, 2020, a delivery driver slipped in mud while walking around the back of a semi trailer. The employee fell, suffering a broken right ankle.",1
"An employee was diagnosing a problem with a car. When the customer sat inside the car, the shock absorber in the car's wheel well pinched the employee's ring finger, amputating the fingertip.",0
"An employee was trying to get the jaws to retract inside a machine's drum. The jaws retracted on the employee's left little finger, causing an amputation to the tip.",0
"An employee was cleaning a van after a trip. The van began to roll and ran over the employee, causing fractures to the employee's pelvis, ribs, and shoulder.",1
An employee was pulling a cart. The employee's left little finger was caught and amputated between the cart and another cart.,0
An employee was driving a reach forklift when it struck a bollard. The employee's leg was caught between the forklift and the bollard and was broken.,1
"An employee was loading traffic control barrels into the bed of a truck. The truck moved and the employee lost his balance and fell to the highway asphalt, breaking his wrist.",1
"An employee was removing the lockout bar from a dumper. The dumper fell on the employee, breaking the employee's lower leg, ankle, and shoulder.",1
"An employee removed a piece of pipe to clear a blockage. After removing the pipe, the employee backed away and removed his PPE. The blockage broke loose and he was splashed/sprayed with condensate/steam heated to about 180-200 degrees Fahrenheit. He was hospitalized with burns to his elbow and shoulder blades.",1
"An employee was installing/winding a rope on a four-drum, motorized rope puller. The employee's right little finger was caught between the rope and the drum, and 1/2 inch was amputated from the tip of the finger.",0
"An employee fell while climbing down an extension ladder. The employee landed about 7 feet below, suffering fractures to the right arm, right shoulder, and right-side ribs.",1
"An employee was removing bolts on a shaft adapter with a ratcheting allen head socket wrench. While the employee was loosening a bolt, the blocking bar for the shaft slipped, allowing the shaft to drop 6 inches and pinch the employee's left little fingertip between the ratchet and the top of the gearbox. The finger was partially amputated.",0
An employee was holding a piece of trim to be bent in a trim folding machine. The machine actuated and the employee's left hand was caught under the clamping beam. The employee's fourth and fifth fingertips were amputated.,0
"After bagging fertilizer, an employee shut off the bagger and began clearing out the hopper at its top. The auger began to turn and amputated the employee's right index finger.",0
"An employee was polishing a metal drive shaft attached to a manual lathe. His rubber glove got caught and the lathe twisted his arm, breaking it.",1
"An employee was loading a package car. The employee's leg became sore and the employee was hospitalized, having suffered a broken hip.",1
An employee was using a horizontal saw to cut tubes. The saw cut about 1/8 inch off the tip off his left middle finger.,0
"An employee was lubricating a chain and sprocket during preventive maintenance when the employee's hand was caught in the chain and sprocket, resulting in a fractured right finger.",1
"An employee was moving a dock leveler plate when the plate dropped, causing a fingertip amputation.",0
"While installing under-cabinet lighting, an employee fell off a 4-foot step ladder and landed on the floor, resulting in a loss of consciousness, two broken front teeth, and a broken nose. The employee was hospitalized.",1
"An employee tripped on plastic while stepping off a pallet. The employee fell, suffering a broken hip.",1
"An employee was securing a front-end loader that was loaded on a trailer. He fell from the loader onto the concrete below, suffering injuries to the shoulder blade, ribs, a collarbone, as well as blood in the lungs.",1
"An employee tripped and fell to the floor, suffering a compound fracture to the right elbow.",1
"The injured employee was in a cherry picker. A stand-up forklift struck the cherry picker's wheel and the injured employee fell, landing 20 feet below and suffering a head contusion, a broken collarbone, and broken ribs. Fall protection was not worn at the time.",1
"An employee was stepping down while walking into an area. His foot rolled and he fell onto a concrete floor, breaking his left lower tibia and fibula.",1
An employee was stepping out of a scissor lift when his left ring finger got caught in the metal wire/pins of the scissor lift gate. The fingertip was amputated at the first knuckle.,0
"An employee was waiting to help guide a concrete barrier as it was moved. The barrier struck his left foot, injuring it.",1
"An employee was loading tools onto a truck. While closing a cover, the employee fell from the back of the service truck, landing on the ground 4-5 feet below and suffering a broken arm.",1
A mail carrier tripped and fell on stairs at a residence. The employee sustained broken ribs and a punctured lung.,1
An employee was walking a scissor lift up a ramp. The lift rolled back and caught the employee's right arm against a wooden platform. The arm was broken at the forearm and elbow.,1
"An employee's truck broke down while he was on a dirt pit site. A mechanic on site put the truck on a low boy to transport it back to the company's physical location. While the truck was on the low boy, the employee entered the truck to retrieve paperwork, slipped, and fell off the low boy onto the ground and landed on his left arm and wrist. His left wrist was fractured.",1
An employee was manufacturing 4-foot-long pieces of strip metal into cable hangers. The employee's right middle fingertip was caught in the stamping press. The fingertip was amputated just below the fingernail.,0
An employee was performing preventative maintenance on a paper machine's hood exhaust fan. The employee was trying to remove a belt when their right middle and ring fingers were pinched and lacerated between the exhaust fan belt and sheave. The employee sustained an amputation to the fourth finger on the right hand.,0
"An employee was standing on level ground, stocking cases of tissues. He became lightheaded, lost his balance and fell. He tried to catch himself on a forklift and his right forearm got stuck between a pallet and the forklift backrest. The employee suffered a fractured right forearm and was hospitalized.",1
"While carrying wood blocks, an employee turned, tripped, and fell. The employee's head hit a metal tool box, requiring hospitalization.",1
"A temporary employee backed into a parked cement truck while operating a concrete buggy, resulting in contusions and lacerations to the right leg.",1
"A service technician was standing on the frame rail of a truck and torqueing engine cylinder head-bolts using a torque wrench. He fell to the floor, suffering a broken hip and wrist.",1
"An employee was lowering a transfer hose between two liquid cargo barges. The winch started to free-spool and the hand crank came out of its seat. The employee was putting the hand crank back in to stop the winch from free-spooling, when the gears on the winch caused a partial amputation of a finger on the right hand and a fracture.",1
"An employee was picking up metal scraps around a jobsite when he tripped and fell 20 feet from a balcony to the ground. He suffered seven broken ribs, a concussion, a collapsed lung, and a possible right arm fracture, requiring hospitalization.",1
"A truck driver had just dumped dirt from his truck on a shoulder. A skid steer loader began moving the dirt from the shoulder to grade out the slope. The skid steer was backing up to the slope to get its second load of dirt when the truck driver's right arm was caught between the back of the skid steer and the back of the truck. The driver's radial artery and radial nerve were severed and the driver was hospitalized, undergoing surgery.",1
"An employee was in a newly dug grave, measuring it, when its walls gave way and the employee was trapped. The employee suffered lower back and chest pain and was hospitalized.",1
"An employee was working in a lumber yard when a forklift backed into him, breaking his left leg.",1
"An employee was setting a ring on a manhole when the ring came down on and crushed his left middle fingertip, amputating the underside and half of his fingernail.",0
"While installing plumbing in a clean room, an employee contacted a white powdery substance that burst into flames. The employee suffered thermal burns to the hands.",1
A nurse practitioner slipped on a wet floor while evaluating a patient. She fell backwards and her head struck the floor.,1
"A temporary employee fell from a board to the ground about 5 feet below. The board was on top of a retracted scissor lift. The employee was hospitalized, having suffered a broken hip that required surgery.",1
"An employee was delivering mail when slipped and fell to the ground, suffering a broken hip.",1
"An employee was trimming a sheet of plywood on a table saw. The blade caught his fingers, amputating the tip of his right index finger.",0
"An employee was preparing to pull mirrors from a rack to get at a particular mirror. The stack of glass hit the left side of the employee's face, causing a severe cut. The employee was hospitalized.",1
"An employee slipped in loose gravel while walking across a parking lot. The employee fell, suffering a broken hip and a twisted ankle.",1
"An employee was operating a forklift when his left leg was caught between the forklift and a stationary metal rail guard. He suffered an open fracture of the tibia and fibula, as well as an injury to the left peroneal artery.",1
"On May 5, 2020, an employee was measuring a trailer to install a winch when he tripped and hit his head on the truck's bumper. He suffered a bruise on his left side and was hospitalized with a head injury.",1
"An employee tripped on a banding strap and fell to the ground while walking, fracturing a kneecap.",1
"An employee was disconnecting the electrical supply from a piece of equipment for removal and transport. When he returned to the machine after testing the source to be sure it did not have power and verifying that the disconnect was in an off position, the cut wires burst open from an arc flash that burned his face, left hand, and arm.",1
An employee was installing exterior handrails on the fourth floor of a multi-family residential building under construction when the employee fell approximately 40 feet to the ground. The employee was hospitalized with leg and back injuries.,1
"An employee was using a forklift to offload drywall. While sitting in the forklift, the forklift became unbalanced causing him to hit his head on the top rail, suffering a contusion to the top of his head.",1
An employee was attempting to unclog a flour build-up in the spout transition section of a flour distribution station when a rotary valve activated and amputated the distal joint of his right index finger.,0
"An employee was washing off the machine wash rack area using a spray wand. He then started washing down the wash rack floor, stepping backwards while continuing to wash in a side to side motion. The pressure washer wand went across his left knee area; the water punctured his jeans and his skin just above the left knee. He was hospitalized.",1
"An employee fell while walking down a stairway, landing on the concrete floor at the bottom and suffering a head laceration. The employee was hospitalized.",1
"An employee was going down a set of stairs when he stumbled on the bottom few steps and lost his balance. After taking a couple of steps to regain his balance on level ground, he bumped into another employee and fell to the ground on his left hip. He was hospitalized with a fracture to the left femur at the hip joint.",1
A temporary employee was changing the filter in a dust collector. A fan in the hose caught his finger and amputated the fingertip.,0
"An employee was on a step ladder, placing an auto part on a shelf. He fell off the ladder and struck his head on the floor, suffering a head laceration. He was hospitalized.",1
"An employee stepped off a single step, fell, and suffered a broken left hip. The employee was hospitalized, requiring surgery.",1
"An employee was using his gloved fingers to clean out a gunite machine's feed wheel area when his glove was caught in a pinch point. The feed wheel then caught his left index and ring fingers, resulting in the medical amputation of his index finger and requiring surgery for his ring finger.",1
"On 5/5/20, an employee was walking to his work station when he was struck by the tail of a forklift as it was making a three-point turn. He sustained a broken right leg and was hospitalized. The designated pedestrian walkway was not used at the time of the incident.",1
"An employee was trying to clear a jam on a tablet press when the machine became disengaged and the release pin came down and pinched his right middle finger, causing an avulsion.",1
"An employee tripped over a cone used to indicate social distancing requirements and fell, resulting in a broken hip.",1
An employee was operating an electric hand truck. The controls struck an upright on a storage rack; the employee's hand was caught and injured between the controls and the storage unit.,1
"An employee was attempting to clear debris that was causing noise in a machine's dust collection system. His hand was inside the discharge chute when the dust collection blades partially amputated his right pinky, ring, and middle fingers at the first joint past the nail.",1
"An employee was unloading a truck of medical supplies. As the employee lifted the truck's lift gate and the automatic dock plate, the employee's hand was caught between the lift gate and the dock. The employee sustained crushing injuries to the right hand second through fifth fingers, requiring hospitalization and surgery.",1
An employee was driving a pallet jack when it hit a shrink wrap machine. The employee suffered a broken right big toe and was hospitalized.,1
"An employee opened a process lid to address a jam in a piece of equipment. The lid bounced back and closed, catching his right thumb and amputating the tip.",0
"Three employees were cleaning a heater treater when a gas build-up caused an explosion in the building. Two of the employees received minor injuries; the third was hospitalized, having suffered a severe laceration across the forehead, burns to the face and neck, and a fractured spine.",1
An employee fell from a 10-foot A-frame ladder to the ground while descending. The employee's elbow hit a push cart and their head hit a metal cover on the floor resulting in a fractured elbow and stitches above the eyebrow.,1
An employee was installing a telephone pole. He backed up from the sidewalk and was stepping off the curb when he lost his balance. He tried to turn his body to catch himself when he landed face first on his side on the street. He suffered two fractured ribs and a bruised spleen.,1
An employee was attempting to cover a loaded dump truck with a tarp along with another employee on top of the dump bed when the wind caught the tarp and blew him off the top of the bed to the ground. He was hospitalized with a concussion and a laceration to the back of the head.,1
"A product fell on an employee who was working on an order picker. The employee suffered neck and head injuries and was hospitalized on May 7, 2020.",1
"An employee was cutting a piece of frozen meat with a band saw when his hand slipped and the blade cut his right little finger, causing a displaced fracture of the distal phalanx.",1
"An employee was operating a loader when it backed over a hill. The employee was thrown from the loader and was hospitalized for a dislocated shoulder, three broken ribs, a cracked pelvis and a bleeding spleen.",1
"An employee was leveling out trash and roofing debris inside a roll-off dumpster. Another employee picked up a piece of newly removed roofing debris and proceeded to dispose of it into same roll-off dumpster, hitting the injured employee on his right hand. He suffered injuries to his right wrist/forearm and the right side of his body.",1
"An employee was operating a skid steer while another employee acted as a spotter. The two employees were talking, with the skid steer stopped; the machine jerked and its track struck the spotter, breaking her left tibia. She was hospitalized.",1
"On May 6, 2020, at approximately 7:45 p.m., an employee stopped a lathe and pulled a nylon strap through the center of a 13-inch long, 8-inch diameter part. The nylon strap was attached to a jib crane, and the employee needed to jog the lathe to lock the chuck. The lathe did not jog and instead began running at operational speed. The employee's gloved right hand was caught between the nylon strap and rotating metal part, resulting in a broken thumb, severed nerves and tendons, and severe tissue damage to the hand.",1
"On May 6, 2020, an employee was operating a metal shear to cut 2-inch strips of aluminum. He was attempting to catch the strips behind the shear so they would not fall on the floor. While his hand was behind the machine, the shear was actuated via the foot petal, causing the shear to come down on his left middle finger. His fingertip was amputated to approximately the end of the nail bed.",0
"An employee walked into the back room and tripped over quick service restaurant equipment, fell, and injured her knee. She was hospitalized and had knee surgery.",1
"An employee was mopping a restroom floor when her hand slipped from the mop handle and she lost balance and fell to the floor. She broke her left leg and was unable to stand, requiring hospitalization.",1
"An employee was standing on a stack of cardboard, labeling and reviewing items to be moved when a stock order picker (equipment) came around the corner. When the employee saw the equipment approaching, she attempted to step down and ensure she was not in a hazardous situation with the equipment. She stepped on the side of a wheeled cart, causing the cart to move, and she lost her balance. She fell and hit her head on the concrete floor, suffering a subdural hematoma that required hospitalization.",1
"At about 8:10 a.m. on May 6, 2020, an employee was running a low-pressure test line to a pressurized tank. The employee's foot got caught in the exhaust hoses and he fell, landing on his right hip and breaking it. He was hospitalized.",1
"An employee slipped on shrink wrap and fell, her head striking an automatic dishwasher. She suffered a head injury, with a possible concussion.",1
"An employee was in a bucket replacing an existing electrical pole. The employee became entangled in his lanyard. As he was untangling his lanyard, the bucket shifted. A powerline under tension and pulled around a jib frame, rolled up and off the jib frame as the bucket shifted. The power line acted like a rubber band and struck the employee. The employee was ejected from the bucket and fell about 32 feet to the ground. The employee suffered broken bones in both feet and a broken arm.",1
An employee was using a utility knife to cut a pipe for a slab conduit when the knife slipped off the pipe and lacerated the employee's right forearm.,1
"An employee was driving a forklift in the warehouse freezer. When he came to a stop, he slid into the forks of another forklift and hit his left foot on the forks, causing a soft tissue injury.",1
An employee was cutting pork with a meat saw. The saw amputated his right index finger.,0
An employee stepped on a storm inlet grate that was not seated fully on the top flange after getting off equipment. The lid flipped in and the worker fell approximately 15 feet to the bottom of the inlet.  He was hospitalized with a dislocated shoulder and possible cracked vertebrae.,1
"An employee was on a roof, caulking a chimney. He fell from the roof to the ground, suffering a broken leg.",1
"An employee was at the loading dock ready to unload a truck. The employee manually picked up the lift dock plate with the assistance of the delivery driver. The delivery driver released too soon, which caused the plate to land on the employee's right pinky and ring fingers. Part of the pinky finger was amputated during the incident.",0
An employee was backing up from a trailer on his forklift when the pallets fell off the forks. He got off to place the pallets back on the forks. The forklift rolled forward and pinned him between the pallets on the forks and the I-beam under the trailer. He suffered a broken leg and ankle and was hospitalized.,1
"An employee was backing up a construction/utility vehicle. The corner of the vehicle's bucket caught a stack of three bales and tipped over the top bale. The bale struck the injured employee who was separating cardboard in the area, causing a broken leg and bruised ribs.",1
"An employee was using a pipe to fill a 5-gallon bucket from a barrel containing chemical. The pipe broke, allowing chemical to splash and burn the employee's lower body.",1
"An employee was removing a small piece of drywall that also had a ceramic tile attached. After it was removed from its metal stud framing, the material fell toward the floor, and the ceramic tile cut through his work boot and lacerated the top of his left foot.",1
"An employee fell as he was descending a wet grassy slope, resulting in bilateral knee injuries requiring surgery.",1
"An employee was operating a planer. The planer's blade touched his right thumb as he tried to pull out a piece of lumber, partially amputating the thumb.",0
"An employee was rinsing down a tub wash machine in the off position with a water hose when he noticed a piece of plastic in the machine and turned it on. He was attempting to retrieve the plastic when the moving conveyor belt caught his glove and proceeded to cut his finger, resulting in an amputation to the left ring finger.",0
"An employee was attempting to empty and depressurize kegs. As he removed the stem from a keg, the stem discharged into his face, fracturing his facial bones.",1
"A delivery driver became dizzy and vomited, suffering from heat-related dehydration.",1
"An employee was conducting wildlife surveys from a UTV. After attempting to dig out the UTV, she was climbing back into the vehicle and had her hand on the roll bar when her foot slipped off the step-up plate, causing a sudden sharp pain to her abdomen area. She was in severe pain and required hospitalization for a muscle injury.",1
"While ringing out customers, an employee suffered an allergic reaction to latex from the gloves worn by customers.",1
"An employee was working from an extension ladder at the edge of a high-ceilinged room. The ladder's feet slipped on the floor and it fell; the employee fell with it and landed on the concrete floor, also striking the ladder itself on the way down. The employee suffered a broken right femur, a broken right elbow, and lacerations to both legs, and was hospitalized.",1
"An employee was installing an electrical system neutral when the wire came into contact with the energized side of an insulator, creating an arc flash. The employee received electrical burns to the hands and was hospitalized.",1
An employee was performing roofing work when he fell 12 to 15 feet through the roof and suffered a compound fracture in his arm. He was hospitalized.,1
"An employee was operating a film cutting machine when his hand entered the machine's chute, resulting in an amputation to his right index finger.",1
"An employee was pulling product when he stepped backward and tripped on a pallet on the concrete floor, resulting in a fractured left wrist.",1
"An employee was operating a scraper when the cushion hitch closed, restricting the shock-absorbing capabilities of the scraper loaded with soil. The employee hit an obscure bump on the haul road and as a result experienced a back injury that required hospitalization.",1
"An employee was stepping into a vehicle at a customer site, holding a package she had just picked up. She fell to the ground, suffering a broken right femur.",1
"On May 7, 2020, an employee was helping to set up a scaffold tower on ground level when the jacking system fell over and struck his right foot, resulting in the amputation of one toe. He was hospitalized.",1
An employee was gathering up work tools at the end of a work day when a piece of angle iron fell off dunnage and hit his ankle area. He was hospitalized and required surgery for broken bones in his ankle/leg area.,1
"An employee was removing tooling from a hydraulic press brake when the brake came down on the employee's right hand, resulting in a partial amputation to the right ring finger.",0
"An employee was attempting to lift a dock plate when his hand slipped from the handle. He fell backwards, lost his balance, and hit his head on the ground.",1
"At approximately 6:30 p.m. on May 7, 2020, an employee was using a set of  5-foot high job-made wooden scaffolds, standing on a 2x10 plank, while nailing a floor joist overhead. He lost his balance and fell to the concrete floor, hitting his head. He experienced dizziness and was hospitalized for a concussion.",1
An employee was operating a foil cap insert machine when his hand entered the point of operation and the foil shear amputated his right ring fingertip.,0
"An employee was changing out a paper roll set on a winder. The core chucks were being retracted, and he was clearing a piece of paper from them when the tip of his left index finger was caught in the wedge hole. As the chuck retracted into the outer cylinder, about a centimeter of the fingertip was sheared off.",1
"An employee was prepping a piggyback air emergency spring brake chamber to later be placed on a truck in need on a service call.  To cage the spring and remove hazardous energy from the internals of the part, he supplied air pressure to compress the spring and then placed the caging bolt in the hole on the end to retain the spring.  When his finger was in the pinch point placing the nut on the caging bolt, the chamber lost air and actuated the spring with the bolt in it. His finger was then caught between the nut and the base of the chamber, causing skin removal and partial nail removal to his right index fingertip.",1
"An employee had just delivered a 30-foot cantilever gate. He began re-strapping his remaining load while others unloaded the gate. The gate slipped out of the forks of a skid steer, tipped over, and struck the employee's legs from behind. Both his ankles were broken and he was hospitalized.",1
"An employee tripped and fell forward. Her left shoulder struck a stacked pallet of gas meters, and her left humerus was broken.",1
"An employee was rigging steel beams for unloading from a trailer when he tripped and fell from the trailer to the ground, landing on his left side. He suffered a fractured left elbow, laceration, and contusions to the head.",1
"On May 07, 2020, at 8:30 a.m., an employee was operating a powered pallet jack when a co-worker operating another powered pallet jack struck his pallet jack, causing him to lose control of his pallet jack. He crashed into a rack, pinning his ankle between his pallet jack and the rack.",1
"An employee was taking down a palm tree when he was struck by a tree limb, suffering three broken ribs.",1
"On May 7, at approximately 10:24 AM, a temporary employee was standing on a platform while insulation was being rolled on a laminating machine's mandrel when his hand was pulled into the rotating mandrel. He suffered a cervical fracture in his neck and two fractured bones in his right arm, requiring hospitalization and neck surgery.",1
"Employees were lowering the bottom half of a distribution box into an excavation when the shackles became caught on the notch outs. The load was re-rigged with wire to allow the box to be completely set into place. One of the shackles was stuck and the injured employee was trying to get it to break free. The wire broke before the shackle could be released, allowing the load to drop on the employee's foot and partially amputate the employee's left big toe.",0
"A temporary employee was attempting to close a sliding warehouse door from the outside when a metal horizontal beam fell from the door framing and struck his left hand. His left ring finger was almost completely severed during the incident, which also broke his left pinky finger and caused a puncture wound.",1
"On May 8, 2020, an employee was operating a lathe and polishing a tube using an emery cloth when the employee's right-hand glove came in contact with the rotating part and pulled the employee's hand into the lathe. As a result, the index and middle fingers on the right hand were amputated.",1
"At approximately 1:45 p.m. on 5/8/2020, an employee was struck by a vehicle that entered a work zone on I-95.",1
"An employee was adjusting a shim on an excavator arm to install a new pin. The employee asked the operator to lift the arm slightly. His fingers were then caught in a pinch point, resulting in the amputation of his index and middle fingertips.",0
"On May 8, 2020, an employee was moving a finished core from an unwinder machine with a crane and attempting to set the core onto the slabbing table. The table flipped and the core struck the employee in the right shin, resulting in a fracture.",1
An employee was standing on a trailer looking at the motor of a construction loader when he fell backwards off the trailer onto the asphalt ground. He suffered two damaged neck vertebrae and a laceration to the back of the head.,1
An employee was welding in a manlift approximately 14 feet above the ground when the manlift pinned the employee against the bottom of an I-beam. He was hospitalized with a fractured jaw and neck injuries.,1
An employee was found on the floor after delivering his last package.,1
"An employee was trying to remove the fifth wheel from the back of a truck when the employee slipped and fell to the ground, suffering broken ribs.",1
"On May 8, 2020, an employee's foot became caught on the leg of a table. She tripped and fell, breaking her hip and requiring hospitalization.",1
An employee was reaching for rebar gathered in a trough on a rebar stretching machine when the employee's right ring fingertip was pinched as the trough actuated. The employee sustained a distal amputation on the right ring finger.,1
"On May 8, 2020, an employee was using a maul hammer when part of the tool struck the employee's left pinky, causing crushing injuries and a pinky fingertip amputation.",0
"An employee was working on a scaffold 8 feet high and scooting from one area to another when one side of the scaffold fell into a drainage hole. The scaffold then began to tip over, and the employee jumped out of the scaffold. Upon landing on the ground, the employee fractured his left ankle, right tibia, and right fibula.",1
"On 5/08/2020, at 09:30 AM, an employee was delivering concrete to a construction site and installing the metal chutes on his ready mix truck when his right two middle fingers were pinched between chutes. As a result, he sustained a partial traumatic transphalangeal amputation of his right middle finger.",0
An employee was inspecting his powered industrial vehicle (PIV) when another PIV struck him and he was caught between the two vehicles. He was hospitalized with a fractured hip.,1
"An employee was checking the belts on a commercial truck when the operator started the truck while the employee's hand was in the belts. When the truck started, the employee's right hand became caught between the belt and pulley, resulting in the amputation of his right index finger and middle finger.",0
"An employee was walking outside the premises of the main building. The soil foundation was loose and he stepped over vapor lines under the ground, resulting in his left leg getting burned from the calf down. He was hospitalized.",1
"On May 8, 2020, at 10:30 AM, an employee was spraying a wasp nest with wasp spray. The nest then fell to the ground and she went to step on the nest. As she did this, she rolled her ankle and fell into the side of the building. She felt pain in her ankle and was hospitalized for three broken bones and a torn ligament in her foot.",1
"An employee was setting a power pole when his right thumb tip was caught in the boom tip on a digger truck, partially amputating the tip of his right thumb.",0
An employee was trying to lift a dock plate into place with another employee when the employee lost balance and fell backward onto the concrete floor. The employee was hospitalized with a broken right hip requiring surgery.,1
"An employee was drilling a hole on a pole during an inspection. When the employee pulled the drill out of the hole, the bit came off the drill and struck the employee on the face, resulting in a fractured jaw.",1
"An employee was using a paper cutter. The cutter came down on the employee's left thumb, amputating the tip.",0
"An employee was handling the lift gate of a company truck when his pinky finger was caught by the gate, resulting in a fingertip amputation.",0
"An employee suffered a right index finger amputation while operating a chop saw, requiring hospitalization.",1
"An employee was working to remove a section of catwalk that was approximately 30 feet high when he stepped from the catwalk section being removed onto the assumed catwalk to be left in place. The planking of the catwalk bent, causing him to lose his balance and fall to the ground. He suffered a broken right arm.",1
"While drilling a hole for installation of a dirt infiltration system, the machine became unbalanced and tipped over. The employee suffered a fractured foot.",1
"An employee was adjusting a trailer dolly between two trailers. As the employee began to move the dolly from under the rear trailer, the weight of the trailer shot the dolly forward. The dolly hit and pushed the employee, who became pinned between the two trailers and injured his pelvis.",1
"While walking through a doorway, an employee tripped over the threshold and fell to the ground, suffering a broken hip.",1
"An employee initiated a machine to start a production cycle. His hand was in the path of the machine's closing guard, which closed on and caused the amputation of his left index finger's distal phalanx.",0
"An employee was loading/securing equipment on a trailer when a bucket attachment moved and pinched his right hand between the bucket and an excavator boom, resulting in a partial amputation of his right ring finger.",1
"On May 9, 2020, an employee was using an Allen wrench to tighten a manual lathe when the wrench slipped, resulting in his left ring finger hitting the lathe's blade. His fingertip was amputated. The lathe was not in operation at the time of the incident.",1
"An employee was repairing a truck when an adjacent truck pulled away and ran over his right foot, breaking it. He was hospitalized.",1
"An employee went to clean the belt of a trimmer on a machine that is used to make plastic bottles. The belt caught the rag, pulling his right index finger and pinching it in the equipment. As a result, he sustained a partial amputation of the right index fingertip (no bone loss).",0
"An employee was cleaning around an airlock on a blower system when the employee's fingers were struck by the moving paddles, resulting in the amputation of the right middle and ring fingers to the first knuckle.",0
"An employee was on a ladder trimming a tree when he slipped and fell from the ladder, landing on his back. He was hospitalized with a back injury.",1
"An employee was troubleshooting an electrical circuit in an electrical cabinet at the base of a wind turbine when an arc flash occurred, causing second degree burns to the employee's right hand.",1
"An employee was working on a roof when wind blew the employee 30 feet across the roof and 18 feet off of it. The employee suffered a broken wrist, fractured leg, and torn knee.",1
"An employee was driving a forklift when it struck pallets loaded on another forklift. The pallets hit the employee, who suffered a broken pelvis.",1
"An employee was kneeling down prepping towable vacuum equipment to connect to grooving equipment. When he stood up, he lost his balance, fell forward, and struck the right side of his face on the hitch of the grooving equipment. He was hospitalized with a face injury.",1
An employee was operating a pick cart when the employee turned and fell onto the concrete floor. The employee was hospitalized with a severe hip injury.,1
An employee was cutting cilantro with a knife. The knife partially amputated his left thumb.,1
"An employee was using a foot-actuated stamping press when she lost her balance and leaned forward. Her hand then entered the point of operation while the actuating pedal was being pressed. The press crushed her left pinky finger, resulting in an amputation at or just above the distal joint.",1
"On May 11, 2020, an employee was feeding panels into a double end tenoner when the blade cut her left hand/fingers.",1
An employee was unloading a general merchandise truck when he experienced chest pains. He was hospitalized with a heart attack.,1
"An employee was clearing grass along a ditch using a side-by-side mower. One of the mower's tires went into the ditch line, causing the mower to flip. It struck the employee in the back, injuring two lumbar vertebrae. He was hospitalized for surgery.",1
"An employee was conducting maintenance on a side plate's coupon feeder when the side plate retracted back to the home position, catching his right middle finger between the slide plate and a roller. As a result, the employee's right middle finger was amputated.",0
An employee experienced breathing difficulty while smoke jumping and was hospitalized.,1
An employee experienced an amputation of his right arm while operating a cable stripper on 05/11/20 at 5:15 p.m.,1
"While operating a straddle machine, an employee attempted to make a right turn when the straddle tipped over. The employee sustained a left arm fracture.",1
"An employee was helping to restrain a combative patient in an emergency room. The patient attacked and fell backwards onto the employee's left leg, causing a fracture that required hospitalization and surgery.",1
"An employee was walking along the dock, scanning bar codes, when a forklift backed up and struck him. He suffered a fractured pelvis.",1
"While preparing work on a tubular welded scaffold, an employee fell approximately 15 feet from the scaffold to the ground, suffering broken ribs.",1
"On May 11, 2020, an employee was operating a drill press while wearing a glove. The employee's glove became caught on the rotating chuck, resulting in a thumb amputation.",0
"An employee was preparing to fill a truck up with water at a water station. The truck had a 3-inch cam lock and when the employee attempted to make a connection, the hose popped off, striking the employee in the face with approximately 700 PSI. The employee sustained a concussion, broken nose, and facial lacerations, requiring hospitalization.",1
"An employee was climbing a fixed ladder while carrying plastic to place the plastic over a hole on the roof that was leaking due to a storm. He slipped and fell approximately 12 feet off the ladder to a lower level, fracturing his right wrist and right hip.",1
"An employee was repairing an industrial powered truck when the hydraulics failed, causing the lift carriage to fall onto his back.",1
"An employee was replacing forks on a warehouse forklift truck. The employee was standing in front of the forklift, facing the forklift carriage. He lifted the pin on top of the carriage fork holder and was installing the fork. His co-worker, who was sitting in the forklift, operated the control lever and pinched the employee's left thumb between the carriage and the fork, resulting in a thumb tip amputation.",0
"An employee was in the process of turning a coil on the mill when he attempted to push the coil behind a safety gate. The coil then uncoiled, catching his left thumb between the safety gate and the coil. As a result, his left thumb was partially amputated.",0
"An employee was in the in the rear of a bucket truck making up material when another employee aloft in the bucket began to lower the basket to its cradled position. The employee in the back of the truck was struck on the right shoulder by the bottom of the basket, which caused forward momentum and positioned him between the basket rest and the basket as it came to its resting position. He suffered five broken ribs on the right side of his abdomen and a hemopneumothorax.",1
"An employee was cutting a piece of Styrofoam on a table saw when his left hand came in contact with the table saw blade, cutting three fingers.",1
"An employee was driving a forklift when a bale of dry waste fell onto his leg, causing a compound fracture.",1
"An employee was walking up stairs that went over a conveyor. The employee tripped and fell, suffering a broken right upper arm, a head injury, and an injury to the left little finger.",1
An employee was doing a pre-check of the warehouse when he heard something metal coming down the screen. He opened the airlock and was investigating with his hand when the airlock fan blade amputated three of his fingers.,1
"An employee was a team member inspecting an aircraft hangar. While opening the hangar doors, the employee's hand was caught between one of the hangar door panels and a support beam, resulting in a laceration and broken fingers.",1
"While walking, an employee's legs gave out and the employee fell to the floor, suffering severe facial contusions and a broken nose.",1
"An employee was unloading a railcar. Product collapsed and fell on the employee, who suffered multiple fractures.",1
"After repairing an AC unit on top of a lab area, an employee was descending a ladder when the ladder brace came loose. He fell off the ladder to the ground, hitting his head on the cement floor and suffering head trauma.",1
Two employees were working in a manhole within a roadwork zone. A vehicle crossed into the work zone and struck the employees. One of them suffered multiple fractures and was hospitalized.,1
"An employee was walking through a set of double doors. As she was closing the door, her right pinky finger was caught between the door and the frame, causing a laceration that resulted in a partial finger amputation.",0
A temporary employee was trying to dislodge a keyboard that had fallen onto a machine. The machine amputated the employee's fingertip.,0
"A commercial driver was opening the doors of a trailer when a bundle of insulation fell out from the trailer, knocking the driver to the ground. The driver suffered injuries to multiple body parts (including rib and ankle fractures) and was hospitalized.",1
"Two employees were replacing a cover on a compact trench system. While they were dropping the cover in, one employee's left middle and ring fingers were pinched. Both fingers were broken, and the middle fingertip was amputated. The employee underwent surgery.",0
"An employee was operating a concrete saw. The saw kicked back and landed on his foot, causing a laceration to the top of the foot that required surgery.",1
An employee was unloading grain from a transport trailer when the employee slipped and fell off the top of the trailer to the dirt ground. The employee was hospitalized with a shattered hip.,1
"An employee was placing material into a metal folding press to be fabricated when the operating pedal was engaged before her hand was out of the way of the moving parts. Her hand was caught in the machine, resulting in one broken bone in her right middle finger and one broken bone in her right ring finger. She was hospitalized.",1
"An employee was feeding a panel saw and holding the boards to be cut. The employee's left thumb was pinched between the pressure beam of the saw and the stack of wood, resulting in a fingertip amputation.",0
An employee was testing an electrical line. The termination point of the line shocked the employee.,1
"An employee entered a forklift. When he engaged it, his right leg got caught in a strap (used to secure cargo to the floor of the forklift truck) and was broken.",1
"An employee was climbing a 6-foot step ladder to access the back of a flatbed crash truck. He realized he needed to move the ladder and climbed down. As he stepped down to the first step, he lost his balance and fell to the concrete floor, twisting and landing on his hip. He suffered a fracture at the top of a femur.",1
"The injured employee was setting a truss about 10 feet high on a residential building. He was working with two other employees. The truss was not going into the right position and when one of the employees pushed it, the injured employee, who was grabbing the truss, lost his balance and fell to the floor, fracturing his hip. The employee required surgery.",1
An employee was shutting down a piece of equipment. He removed a bin and was brushing debris off the equipment when his left hand was drawn into the roto-lock. His index and ring fingers were amputated.,0
"An employee was working on a painter's scaffold, 4.5 feet off the floor, demolishing a wall made of steel and plaster. A wall part shifted and knocked him off the scaffold to the floor. He suffered fractures to a tibia and a small bone in the ankle.",1
"A rail car technician was compressing springs. When he released the spring from the press cage, the bolt released from the lower seat of the spring and hit his throat, injuring it.",1
"An employee put a piece of metal into a shearing machine. The machine caught his left hand, crushing the index and middle fingers.",1
"An employee was picking up a load. While walking from his truck to the security check-in area, he tripped and fell, suffering two broken ribs and a punctured lung. He was hospitalized.",1
"An employee was taking out old parts of a 690-volt electrical panel. When the employee removed one of the panel's doors and placed it next to the live side of the panel, an arc flash burned both of the employee's hands. The employee was hospitalized.",1
"An employee was approaching the exit end of an automated and fully enclosed shot machine. A spring that was discharging jammed between the discharge pusher and the discharge transfer plate. The spring unjammed suddenly. Due to the excess force created between the discharge pusher and the discharge transfer plate, the spring shot out of the machine to the stop plate, a distance of approximately 8 feet. At that exact moment, the employee's hand was near the discharge table and the spring struck the employee's right arm, catching it between the spring and the stop plate. The employee suffered broken bones to the lower right arm (wrist area) as well as severed tendons and nerves.",1
"An employee was moving a mule from one pasture to another when the animal spooked and ran her over, breaking her left femur.",1
"An employee was attempting to mount the step to the cab of a moving backhoe when he lost his balance. He then fell between the tractor and the wheel, and the wheel ran over both of his legs. Both legs were severely injured and possibly broken. He was hospitalized.",1
An employee was servicing a lift truck for a customer at the costumer's site when the employee collided with a stationary object and suffered a broken foot.,1
An employee suffered a hand amputation while operating a saw.,1
"An employee was transferring the material he was running from one spindle on a winder to another spindle when the cutting function on the machined failed to cut through the material. He crawled underneath the spindle within the winder and attempted to cut through the film with a knife. His hand slipped and then his left wrist was wedged between the film and the roller, resulting in bilateral wrist and finger injuries that required hospitalization.",1
"An employee was on a roof looking for leaks when the employee fell through a roof skylight to the concrete floor, suffering a broken arm and shoulder. The employee was hospitalized.",1
"An employee turned off a lathe machine, opened it, and used a push bar to push material into the lathe. The push bar was still in the machine when the lathe was reactivated. The push bar was then thrown into the employee's head, fracturing the skull. The lathe was unguarded at the time of the incident.",1
"An employee was holding/monitoring the purging ""pigging"" of a concrete pumping hose after testing. The hose began flailing and struck the employee in the face, causing face, jaw, cheek, and nose injuries/lacerations. The employee was hospitalized.",1
"An employee was operating an electric pallet jack that had glass on one side and was empty on the other side. When the pallet jack came to a stop, the glass shifted, came off the rack, and struck the employee, pinning him against another rack of glass. The employee suffered a head injury.",1
"An employee was installing solar panel mounting supports on the roof of a commercial building when the anchor he was tied off to ripped out of its seam, causing him to fall 20 to 25 feet to the asphalt below. He suffered brain swelling, a collapsed lung, and paralysis.",1
"An employee was assembling a table. While making adjustments on top of the table, he fell from the table and struck a rebar, which impaled him.",1
"An employee was laying brick while working on a scaffold. The employee tripped and fell 20 feet from the scaffold to the ground below. The employee sustained a broken femur and tissue damage to the leg, as well as an injury to the rotator cuff, and cuts and scrapes.",1
"An employee was attempting to start an extruder. The extruder would not start, so the employee grabbed the belt to pull and rotate the motor with his right hand. Four of his right fingertips were then pulled by the belt into the pulleys, resulting in the amputation of the four fingers.",0
"On May 13, 2020, an employee was operating a metal lathe. The employee inserted a metal pry bar into the chuck of the lathe to spin the tool while cleaning its end with an emery pad. The spinning tool caught and partially amputated the employee's left thumb.",1
An employee in the parking lot suffered an amputation of the end of the pinky finger up to the first joint below the fingernail when a coworker closed a car door on the injured employee's finger.,0
"An employee was helping move a portable scaffold on wheels. The scaffold struck a parked forklift, and the scaffold railing amputated the employee's left ring and middle fingertips. The employee was hospitalized, undergoing surgery to have the fingertips reattached.",1
"An employee was operating a skid loader. While his feet were resting outside the front of the cab, he lowered the bucket, which then pinched and broke both of his feet.",1
An employee was performing maintenance and starting a gas plant by turning the valves when a flash fire and explosion occurred. He suffered burn injuries to his hands and face.,1
"An employee fell from the top of a stack of paper rolls, landing 11 feet below and breaking his right hip in three places.",1
"An employee fell from a fixed ladder and landed about 20 feet below, hitting a skylight on the way down. He suffered a broken left tibia and fibula.",1
"An employee was flagging traffic as part of an equipment road crossing effort. The employee had successfully stopped the first vehicle when a second vehicle approached the traffic control scene behind the first. The second vehicle suddenly swerved to the right, contacted the first vehicle, and then struck the employee. The employee was hospitalized with broken legs and a broken back.",1
An employee was using a knife to cut open a box when the knife severely lacerated the employee's abdomen.,1
An employee was struck in the back by a falling bale of boxes.,1
"An employee was using a grease gun to grease a wood chipper turret. The chipper was spun, and the employee's right index finger was pinched in a grease outlet hole on the chipper. The fingertip was amputated.",0
"An employee was working on a roll-up door in the maintenance shop when he noticed that the chain was loose on top, so he placed a ladder next to the door to climb up and fix it. The ladder was placed on the bottom lip of the garage door. The employee asked another employee to push the button to have the door roll up so he could monitor the movement of the door/chain. As the door rolled up, it pushed on the ladder, causing the employee to fall. He struck the ladder, a nearby object, and the concrete floor, injuring his back, side, leg, and arm.",1
"An employee was loading a mold into a vise to saw off an eye bolt when the vise closed on the employee's finger, resulting in a left ring fingertip amputation.",0
"An employee was struck by a car while crossing the street to retrieve a trash tote. The employee was hospitalized with a head/brain injury; a broken back, leg, ankle, knee, and forearm; and broken ribs.",1
"An employee was servicing an ice maker. His knee gave out and he fell to the floor, breaking his right hip. He was hospitalized.",1
An employee was operating a forklift and got off the lift to pick some product when another employee got on the forklift and backed up over his foot. He suffered broken toes and required stitches.,1
An employee was retrieving a tape measure from a roof. The roof was wet and the employee slipped and fell to the ground 10-12 feet below. The employee suffered a broken kneecap.,1
"On May 13, 2020, an employee's left little finger was caught between a metal bale (a device used for lifting, carrying, and rolling boxes) and a pattern box with a sand core inside it. The fingertip was crushed, resulting in its amputation.",0
"An employee fell from a flatbed trailer, suffering right facial fractures, a cervical spine fracture, a right cheek abrasion, a forehead laceration, and paralysis.",1
"An employee was tightening a nut on a polished rod's 2-bolt clamp on a horse head while standing on a well head cap 2 feet off ground when the employee slipped and fell back, hitting a concrete block. The employee suffered a head contusion.",1
An employee was operating a blender in a kitchen production area. The employee was removing a stuck piece of chicken when a paddle inside the machine pinched off the tip of the employee's left thumb.,1
"An employee was setting 20 lb. charcoal bags at a Publix supermarket when the employee felt dizzy and fell to the floor, suffering a cracked rib and minor cuts to the face and hands.",1
"An employee was operating an auto-tarp before dumping a 40-yard open top container. A tarp arm struck him in the face, causing facial fractures, head contusions, cervical fractures, and swelling in his spinal column. He was hospitalized.",1
"An employee was slicing a ham on a table saw when the ham flipped in his hand and his hand came in contact with the blade, amputating his right index fingertip.",0
"An employee was setting up a fence line machine. A moving part of the machine pinned the employee's knees together at the exit table, breaking the employee's right leg and causing nerve damage.",1
"An employee was driving an ATV when the ATV tipped over while making a sharp turn. As a result, the employee suffered broken bones to the left leg.",1
"An employee was repairing an elevated conveyor belt that had separated and stopped turning on the rollers. He repaired the belt and re-energized the system. The belt still did not move properly, and he moved to view the mechanism from a different angle. The belt caught his left hand and pulled it into the roller mechanism. The employee's left hand was crushed and degloved.",1
"An employee was leaving the kitchen after putting water away when the kitchen door slammed on the employee's left index finger, resulting in a fingertip amputation.",1
"An employee was repairing equipment with the aid of a hoist. Another employee accidentally made contact with the hoist controller, causing the hoist to rise and amputated the first employee's finger.",0
An employee was cutting trim on a miter saw when her finger contacted the blade. She sustained a deep laceration with an open fracture to the right second finger. The finger was surgically amputated at the hospital.,1
"An employee was doing roof work. The employee fell from a ladder to the ground, suffering a broken collarbone, a broken sternum, a fractured spine, and slight amnesia.",1
"An employee was lowering a component onto a welding table using a crane when the employee's left small finger was caught between the load and the table, resulting in a fracture and partial fingertip amputation.",0
"An employee was cutting concrete with a chop saw when the saw kicked back, caught his shirt, and pulled him into the saw. The blade severely lacerated his neck, requiring surgery and hospitalization.",1
"An employee was operating a forklift when material wrapped around the employee's leg and forklift, resulting in a broken ankle/leg.",1
"On May 14, 2020, at approximately 1:00 p.m., an employee was operating a dispensing machine fed by a moving conveyor belt. As the employee attempted to retrieve material from the conveyor, the employee's right pinky fingertip was amputated by the moving belt and pulley.",0
"An employee was placing angle iron pieces on a dolly the long way. He placed his hand on the load and his other hand on the handle of the dolly. As he was moving the load, the load shifted and smashed his right index finger between the load and the handle, causing a fingertip amputation.",0
"An employee was training on how to clean off the wire of an auto-tie baler. His right hand was between two pieces of the frame on the machine when the baler cycled and caught his gloved right hand, causing a laceration and open hand fracture. He was hospitalized and had hand surgery.",1
"An employee was standing on the step outside a truck, leaning into the cab to wire a harness, when he fell to the ground. He sustained damage to a previously implanted hip replacement, requiring hospitalization.",1
"An employee was on a silage pile to roll down side walls and weigh them down with tires. A tire rolled downward, striking him in the face. He suffered a damaged ligament in the neck.",1
An employee was spotting for a forklift driver. His left hand was caught and crushed between the forklift's mast and a crate. Four of the fingers were injured and required surgery.,1
"An employee was driving a forklift when it struck a structural steel column, which separated the mast from the forklift. The right side of the employee's skull struck a front support post in the forklift cabin, and the employee suffered a neck fracture and a concussion.",1
"An employee was doing maintenance on a circular head saw blade splitter. The employee was straightening the splitter with an adjustable wrench and cheater pipe extension. The wrench slipped off the splitter, causing the employee to fall backwards onto a platform and suffer a dislocated/fractured right ankle.",1
An employee was pulling electrical wiring for a new sub-station under construction when a flash occurred. The employee sustained flash burns and was hospitalized.,1
An employee suffered an amputation of the right index finger and partial amputation of the right thumb while attempting to unjam a bagger machine. The machine was guarded at the time of the incident.,0
"An employee was driving a double pallet jack. The pallet jack struck a steel racking system as it went around a corner, and the employee suffered a fractured pelvis and vertebrae.",1
"An employee was operating air-powered manufacturing equipment when the employee's left middle finger was caught in the machine, resulting in a fingertip amputation.",0
"An employee was using a cable-cutting machine to cut wires. The wires got caught inside the machine, and the employee was trying to get them unstuck when the machine cycled and amputated the employee's middle and index fingertips. The machine was unguarded at the time.",1
"While moving breakfast trays, an employee tripped on a doorframe and fell to the floor, fracturing the right hip.",1
"A temporary employee was driving a golf cart when it struck a steel beam. The beam broke through the golf cart's windshield, hitting him in the chest and then landing on his legs. He was hospitalized and required stitches (no broken bones).",1
An employee was replacing a hot water tank. Sharp metal on the tank cut the employee's right ring finger. The employee was hospitalized.,1
An employee was manually putting cardboard into a baler when he stepped backwards into the pathway of a forklift and was struck by the forklift's load. He sustained a broken left hip and was hospitalized.,1
"An employee was climbing down a roof access hatch ladder. About halfway down, he fell, landing on the ground about 8 feet below. He suffered a broken left femur and was hospitalized.",1
"An employee hit something while mowing a lawn, causing his leg to break.",1
An employee was operating a stand-on mower. His right foot went under the mowing deck while the blades were rotating. His second toe was degloved and he suffered cuts on his third and fourth toes that required stitches. He was hospitalized.,1
An employee was using a chainsaw on the ground to create a notch in the tree. He had completed the face cut and begun to make the undercut when his foot slipped and the chainsaw's chain lacerated his right thumb. He was hospitalized.,1
An employee was hydraulic hand-sawing on a concrete wall when the diamond-tipped blade made contact with a wood beam. The saw handle kicked back and knocked the employee off a 4-foot baker's scaffold. The employee sustained a skull fracture.,1
"An employee lost balance while putting on and standing up on a pair of drywall stilts. The employee fell from the stilts and broke an arm, requiring hospitalization.",1
"An employee fell to the ground while ascending a ladder, fracturing the left tibia.",1
"While carrying boxes filled with plumbing stock, an employee tripped and fell. His left elbow struck the floor and was shattered.",1
"An employee was cutting a willow tree branch (12-14"" diameter) when the branch snapped and came down on the employee. He suffered lacerations to the head and right kidney.",1
"On May 15, 2020, an employee was moving equipment between a truck and the shop. While stepping off the truck bumper to the shop floor, the employee landed awkwardly and fell to the concrete floor, suffering a broken hip and pelvis.",1
"An employee was using an overhead hoist to lift an assembly (tire and rim) that was still attached to a mounting machine. When the employee lifted the assembly, it caused the machine to lift as well, so the employee unlocked the assembly. At that time, the mounting machine fell on the employee's left foot, crushing it.",1
"An employee was removing flanges with a piece of equipment. A crane moved the equipment, causing it to wedge the employee's little finger against the concrete floor. The fingertip was amputated.",0
"While driving a forklift, an employee hit a pothole and lost control. The forklift overturned and the employee sustained a head injury, requiring hospitalization.",1
"An employee fell down from the third rung of an 8-foot ladder while installing electrical wiring, sustaining a bump and laceration that required stitches to the head.",1
An employee was adjusting a bundle of material that he had loaded on a trailer. He was using a crane to raise one end of the bundle (to slide a block under it) when the bundle slipped off the crane's chain and pinched his hand. His left index finger was amputated.,0
"An employee was working at a paper machine winder, cutting plastic and using a razor. The winder caught his right index finger, causing an amputation above the knuckle.",0
"An employee was walking in an office when she fell to the floor, suffering a broken hip.",1
"An employee was operating a forklift truck when he turned to check his blind spot. As he did, he placed his right hand on the chassis of the forklift. While he was traveling in reverse, his pinky finger was pinched between the chassis and a truck, resulting in a surgical amputation of the finger.",0
An employee was installing a square duct while standing on an 8-foot A-frame stepladder when he lost his balance and fell to the ground. He required stitches on his left eyebrow area and broke his left wrist and T12 vertebra.,1
An employee was walking in the hallway to give out medication to patients when she slipped on wet cereal residue that was spilled on the floor and fell on her knee. She fractured her right patella and was hospitalized.,1
An employee was on an extension ladder affixed to a telecommunications strand. The strand failed and the employee fell to the ground 15-18 feet below. The employee suffered broken ribs and a partially collapsed lung.,1
A maintenance employee was fixing a refrigerator diffuser in a produce cooler that was leaking water. The produce cooler has dock doors for truck deliveries. The employee was squeegeeing the water out of the produce cooler when he slipped on the water and fell off the dock onto the concrete below. He suffered a broken hip.,1
"A fire sprinkler pipe burst or became detached from an anchor, causing large pieces of piping to fall. A falling piece of the pipe stuck the employee in the shoulder and head. The employee suffered broken ribs, a broken sternum, a heart injury, two punctured lungs, and a crushed back vertebra that caused paralysis from the chest down.",1
"An employee was on the ground, trying to get a pallet jack unstuck from under a pallet. Another employee was trying to pry it loose using a forklift. One of the forks on the forklift popped up, hitting the bottom of the first employee's right foot and breaking his heel. He was hospitalized, requiring surgery.",1
"An employee was sitting on a four-legged chair in the break room. When she stood up from the chair, her foot became caught under one of the chair's legs and she tripped, falling to the ground on her right side. She was hospitalized with a fractured right hip.",1
"An employee was cutting a piece of wood with a table saw when the wood kicked back and pulled his hand toward the blade, resulting in a left middle fingertip amputation.",1
"An agent was arresting a fugitive that was in a car. When the fugitive was told to get out of the car, he shot the agent in the right hip.",1
"On May 15, 2020, an employee was carrying empty carboard boxes to place them in a metal crate used to transport the cardboard. After placing the cardboard on the metal crate, she turned to walk away and her pant leg became caught on a piece of metal wire sticking out about 1 inch from the crate's corner. She then fell on the floor and fractured her left hip, requiring hospitalization.",1
"An employee's left hand contacted the moving parts of a braiding machine, resulting in a left ring fingertip amputation (no bone loss).",0
"An employee was assigned with cleaning around the facilities near the fuel islands at a truck stop. While closing the door to an out building, the employee's right fifth digit (pinky) was caught in the door jamb, which ripped his nail and most of the finger off.",0
"An employee was installing insulation while standing on a scaffold when the employee lost balance and fell 6 feet to the ground. The employee suffered a fractured nose and fractures to both wrists, requiring surgery.",1
An employee was cutting meat on a meat saw. He slipped on a piece of fat on the ground and fell; his right middle finger came into contact with the blade and he suffered a partial fingertip amputation.,0
"At about 5:40 a.m. on May 16, 2020, an employee fell while walking into work. The employee's face struck the concrete, causing a head contusion and a laceration above the right eye.  The employee was hospitalized.",1
An employee was adjusting the belt on a capper machine. The drive belt caught and lacerated the employee's right ring finger.,1
"An employee was tasked with removing sweet potato plants from a trailer to be planted in the field. While the employee was climbing on the side of the parked trailer, the top side bracing bar of the trailer came off and the employee fell approximately 1 foot to the ground. The employee was hospitalized with a fractured back.",1
"An employee was lowering the upper die on a brake press to bend a steel cart leg (6-8"" long) when the upper die came down on the employee's left index finger, resulting in a fingertip amputation.",0
"On May 15, 2020, employees were installing drywall sheets, and one employee had his weight on a stack of about 12 sheets piled up against wall studs, when one of the sheets broke. The rest came down on his right knee and broke his right tibia. He was hospitalized.",1
"An employee was giving hand signals to a forklift operator who was lowering a wacker packer into an elevator pit. The forklift operator had boomed out toward the elevator pit when the back wheels of the forklift lifted off the ground. The injured employee was standing on ground level on the other side of the pit. The forklift bucket then hit him at about shoulder level and traveled down his side, pushing him to the ground and coming to a rest on his leg. He suffered a broken ankle, torn ligaments and other damage to his knee, three broken ribs, and a fractured sternum.",1
An employee was using a chop saw when the blade amputated the second and third fingers of the employee's left hand.,1
An employee was cleaning a slicer when she leaned forward and her apron became caught on the start knob. The slicer then amputated her right pointer and middle fingertips.,0
An employee was cutting boneless meat on a boneless meat band saw when the blade amputated the employee's right index finger to the end of the nail.,1
"An employee was walking while conducting housekeeping activities when her shoes became caught on the floor. She tripped and fell, striking and fracturing her right hip and the neck of her right femur.",1
"An employee was removing a steel plate to deliver materials. A pin fell out of the steel plate and the plate fell onto the employee's lower body. The employee sustained a broken leg, pelvis, ribs, and arm.",1
"An employee was climbing down a ladder on a tanker truck. The pneumatic guardrail system on the top of the truck retracted and struck the employee. The employee fell to the ground, suffering broken bones.",1
"An employee was cutting pork loins on a bandsaw in the deli. While positioning the meat, the employee's hand slipped and contacted the blade. The employee suffered a lacerated right index finger and fingernail avulsion.",1
"An employee was working to clear a clogged machine. When he opened the fitting to clear the clog, 190-degree water entered his glove, causing burns to his left forearm.",1
"An employee was setting highway cones on pavement from the back of a cone/attenuator truck. As the employee finished setting the cones, he placed his hand on the support bracket of the truck-mounted attenuator. At the same time, the driver of the cone truck began to retract the attenuator. The employee's right middle fingertip was then caught and smashed between the attenuator and the support bracket, resulting in a partial fingertip amputation.",0
"An employee was cleaning material off a concrete block push-off machine. The pusher cycled and crushed his right arm against the guide, removing skin.",1
"An employee was adjusting a bellypan conveyor belt when his right arm was caught by and pulled into the moving conveyor belt, trapping his arm and causing severe damage to the right arm muscle.",1
"A maintenance employee was installing a lift cylinder on an iron. While he was aligning the lift cylinder bolt hole and a roller, the roller moved and his right thumb was caught between the roller and lift cylinder bolt hole. As a result, he sustained a fractured right thumb.",1
"An employee was running to stop a shopping cart that that was rolling toward parked vehicles. She fell to the concrete/asphalt ground, suffering a broken jaw and shoulder.",1
"After driving and delivering product, an employee returned from a customer site and experienced cramps that did not go away. The employee was hospitalized due to dehydration.",1
"An employee was bringing shopping carts into the warehouse and began to separate two carts that were together. When the carts separated, a cart tailgate fell and pinched his right ring finger, resulting in a medical fingertip amputation.",0
"An employee was operating a tug when the door to the tug blew shut on the employee's finger. The employee's left ring finger was caught between the tug and the door, resulting in an amputation to the finger.",0
An employee was operating a repacking machine. The machine amputated the employee's left thumb.,0
"An employee was cutting flashing on a machine when the flashing stabbed his hand between the index finger and thumb, cutting a tendon. He was hospitalized and had surgery.",1
An employee was in the process of tightening a winch line when his right index fingertip was severed between the winch line and a bracket.,0
An employee was sorting packages on a caster dock when he fell from the dock to the floor below. He was hospitalized with broken ribs and a collapsed lung.,1
"An employee was on two ladders that were tied together to power wash the side of a house. As he was trying to reach the roof, the ladders collapsed and he fell four feet to the ground. The fallen ladders landed on top of him. The employee suffered multiple fractures.",1
"An employee was operating a machine in automatic mode. Copper and scrap material built up in the machine and the employee used his left hand to clear the copper and scrap. When the copper and scrap was removed, the machine cycled and the employee's left index finger was caught between a copper tube and the machine. As a result, the employee's left index finger was fractured. The machine was running at the time of the incident.",1
"On May 18, 2020, a nurse was leaving a home after caring for a patient. She fell to the floor of the home's porch, suffering a hairline fracture to her jaw and an injury to her left leg resulting in damage to an artery. She was hospitalized.",1
"An employee was directing a tug operator to connect the tug to a dolly with mail. The tug operator mistakenly reversed instead of pulling forward, causing the employee's left leg to be pinned between the tug and the dolly. He suffered a puncture wound to his lower left leg.",1
"While cleaning material with a power washer, an employee slipped on a wet surface and struck the edge of a press machine, suffering fractured ribs and contusions.",1
"An employee was helping to lift a steel road plate when the plate pinched his finger, resulting in a fingertip amputation.",1
"On May 18, 2020, at approximately 10:15 a.m., an employee was helping another employee cut sheet aluminum and when his left thumb entered the shear at the same time that the other employee stepped onto the lever. The shear then amputated the employee's left thumb tip.",0
"Two employees were using a propane-powered saw indoors to cut concrete. They began to feel sick, stopped work, and went to the doorway for some fresh air. One of them lost consciousness and was hospitalized, suffering from carbon monoxide poisoning.",1
"An employee was performing controls maintenance on an HVAC unit. While stepping down from working on top of an air handler and onto an A-frame ladder, he fell off the fourth ladder step and injured his left wrist while attempting to break his fall.",1
"An employee was cutting block outs for concrete forms with a worm drive saw when the saw kicked back and cut the employee's left hand, resulting in a left pinky finger amputation.",0
"An employee was pressure-washing an AC unit on a guard shack roof. The employee fell to the ground 12 to 15 feet below, suffered a broken leg, a broken arm, and a broken finger.",1
"An employee was adjusting the plates on an in-ground vehicle lift. As he was sliding the plates, his thumb entered one of the holes in the plate and was pinched, resulting in an amputation to his right thumb tip.",0
"An employee was inside a cage elevated by a forklift cleaning out gutters. The forklift began to roll down the hill and then tipped over. The employee struck the ground and suffered fractures to the back, abdomen and neck.",1
"An employee climbed on top of a roll-off trash container to remove some debris. As he went to get down from the container, he lost his balance and fell 5 feet to the asphalt ground. He was hospitalized with fractures to his right hip and pelvic bone.",1
"An employee was working on a hospital bed when the bed frame collapsed on the employee's left hand, causing lacerations and a possible fracture.",1
"An employee was working with a crew of three people to repair a metal roof. He fell through a flat, corrugated translucent fiberglass panel, suffering injuries.",1
"On May 19, 2020, at 1:30 p.m., an employee was guiding a commercial sign into position when the sign dropped from the rigging used by a boom truck crane to raise and position the sign. The sign struck his left foot, breaking multiple bones and requiring hospitalization.",1
"An employee was trying to open the sealer bar on a piece of bagging equipment, which had closed in the down position due to low air pressure. The sealer bar closed on the employee's right index finger, causing a partial fingertip amputation (halfway down the nail, with no bone loss).",0
An employee was loading a commercial water tank onto a truck using a stair climber dolly. The tank slipped and the employee suffered a broken leg.,1
An employee was looking through a warehouse for missing parts. The employee tripped over some spools of electrical wire and suffered a broken right ankle.,1
"An employee was clearing straws from a wrapping hopper. A transfer belt (which fed straws from the extruder machine to the wrapping hopper) made contact with the employee's right middle finger, amputating the tip just above the first knuckle",0
An employee was removing surface rust on a lathe machine's shaft when the employee's cut-resistant glove became caught in the lathe machine and pulled the employee's arm into the machine. The employee sustained a broken hand and arm.,1
"An employee was replacing cooling fan motors in a switch gear. When he leaned in to install the fan, his right arm came into contact with an energized coil. He received electrical burns to the right arm.",1
"An employee was climbing down a ladder from a trailer. He fell to the ground, his head striking a girder as he fell. He suffered a broken right hip socket.",1
An employee was bitten by a rattlesnake while cleaning up construction debris.,1
"An employee was moving a truck dolly when it pinned the employee's left hand, causing a laceration that required surgery.",1
"An employee was driving a commercial truck on public roadways while hauling poles and equipment for installation of electric utilities.  The truck's brakes did not hold the load while descending very steep terrain in a mountainous area. The truck crashed into the back of other vehicles and the employee was seriously injured, requiring hospitalization for head and other bodily trauma.",1
An employee was cutting lumber with a skill saw. The sawblade lacerated his left hand.,1
An employee was using a circular saw to cut wood when the blade contacted his left hand between the thumb and forefinger causing a laceration.,1
An employee was adjusting an operator seat in a ramp tug. The wind blew a door shut on the employee's finger. The fingertip was amputated.,0
"A temporary employee was servicing a waste container while at the operator position on the back of a garbage truck. As he tried to grab the container with his hand, he leaned onto a hydraulic lever that activated the trash sweeper blade, which crushed his hand. This condition resulted in the surgical amputation of his right hand.",0
"An employee parked a reach truck at the battery recharging station, fell and struck his head on a battery charger. The employee was hospitalized with a laceration, concussion, and a fractured nose.",1
An employee suffered a hernia while lifting a package weighing over 70 pounds. He was hospitalized.,1
"An employee picked up a hose and walked backward into a trench where the metal grate covers had been removed for water extraction. He fell into the trench, injuring his lower left leg and requiring surgery.",1
"Two employees were using a golf cart to transit from one production building to the other when the golf cart veered off the road and turned over into a ditch. The cart landed on one employee's right leg, breaking it in several places.",1
"On May 20, 2020, an employee was mopping a restaurant floor. As he was wringing the mop in the bucket, he slipped, fell, and broke his left hip. He hospitalized.",1
"An employee was operating a processing line. He was moving to insert a drain plug into a hopper, below an auger, when his left middle finger slipped into the drain hole. The auger amputated his fingertip.",0
A sales person was walking down a city street while coming from or going to a customer's business/home when a man robbed and shot the employee in the stomach. The employee required surgery.,1
"An employee fell from a flatbed trailer to the ground. The employee suffered a broken skull, with brain bleeding, and was hospitalized.",1
"An employee was moving a dock with another employee when his hand was caught between the dock board and a pipe, incurring severe lacerations that required hospitalization and surgery.",1
"An employee fell off a moving pallet of potatoes. The employee's right side struck the ground, and the employee's right hip was broken.",1
"An employee was standing on a ladder in the spa section of an empty pool, installing a screen enclosure. The ladder shifted and he fell into the deep section of the pool, hitting the concrete floor and suffering a broken femur and two broken wrists.",1
An employee who was cleaning slipped on soap that was on the floor from soap draining from the walls and pipes. The employee fell on top of a motor and fractured four ribs.,1
"An employee was maneuvering a piece of melamine material through a table saw. The employee's hand came into contact with the spinning sawblade, which cut his hand and finger.",1
An employee was operating a filler machine when her left index finger was punctured by a screw/pin on the machine's moving piston.,1
An employee was testing a gauge when a stream of hydraulic fluid came out the side of a connection and penetrated his finger. He was hospitalized.,1
"An employee was counting wire harnesses when the employee tripped over a wire harness that was hanging over the edge of a barrel. The employee fell to the concrete ground on their right side and suffered a collapsed lung, requiring hospitalization.",1
"At about 2:50 p.m. on May 20, 2020, an employee was loading broth from a holding tank into a tanker trailer in an animal feed department. As the trailer became full, the employee began to remove the load hose from the trailer connection and was sprayed by the broth, suffering burns to the right arm, the torso, and the right side of the face. The employee was hospitalized.",1
An employee's left thumb tip was caught and amputated in the door of a CNC machine.,0
"An employee was securing wooden trusses on a newly constructed pole barn when a truss fell, causing the employee to fall from heights. The employee was hospitalized with back injuries.",1
"An employee was power-washing a concrete drive. Water from the high-pressure power washer tore through his clothes and cut deeply into the skin, muscle, and ligaments of his leg and knee. He was hospitalized.",1
An employee was cleaning the dressing wheel on a grinder. The rag he was using fell between the wheels and pulled his left hand into the wheel. The finger was cut down to the first joint.,1
An employee was operating a meat saw. The saw blade flipped the piece of meat and sliced off the tip of the employee's right middle finger.,0
"An employee was replacing an 80-pound grating over a hole when he dropped the grating on his right index finger, resulting in a fingertip amputation.",0
An employee was moving a piece of board through a jointer. The employee's left middle finger made contact with the blade; the employee suffered an amputation to the finger.,0
"On May 20, 2020, at approximately 7:15 PM, an employee was removing an aggressive client to a seclusion room when the client kicked the seclusion room door. The door slammed on the employee's finger, resulting in a partial amputation of her right middle fingertip.",0
"An employee was going to infill an opening on an existing wall built in 1995. As he prepared to begin, a masonry block fell and landed on his head. He suffered head trauma. He was wearing a hard hat at the time.",1
An employee slipped on the floor and fractured her femur.,1
"An employee was monitoring chicken as it went into an oven. The chicken was getting stuck between two conveyors; when the employee grabbed one of the conveyors to move it, his finger got stuck, and the fingertip was amputated at the first knuckle.",0
"An employee was receiving a package from a mail handler. A case the mail handler was leaning on tipped over and struck the employee, breaking a bone in the employee's lower right leg.",1
An employee was working on a vacuum pipe when a metal plate inside the pipe moved and crushed his right thumb. The thumb was partially amputated at the bottom of the nailbed.,0
"An employee was on a scissor lift, installing flashing over an accordion-style hangar door. The door opened and pushed the scissor lift over. The employee fell to the ground and suffered broken limbs and internal bleeding.",1
"A Prock Marine Company employee was helping a crew set up steel I-beams on a barge to move them to the dock with a crane. In the process, one of the I-beams fell, hitting the employee's leg and knocking the employee into the water. The employee suffered a broken lower left leg.",1
"An employee was inspecting heavy weights in the yard when he experienced stomach aches and cramps, requiring hospitalization due to potential heat exhaustion.",1
"An employee was hanging a piece of rubber matting on the right rear corner of a milling machine. The track on the machine ran over her right foot, fracturing it and smashing the toes.",0
"After processing meat, an employee put his left hand into a sterilizer. His inner rubber glove had come off when he removed his outer cotton glove, and the sterilizer's hot water burned his hand and fingers.",1
"An employee fell off a sawhorse while loading a horizontal boring mill part onto a crane. The part severely lacerated the employee's right wrist, and the employee was hospitalized for surgery.",1
"An employee was adjusting a malfunctioning lift gate. The gate moved downward, crushing the employee's left little finger. The fingertip was amputated without bone loss.",0
"An employee was removing the rear axel on a forklift for maintenance purposes. While the forklift was blocked underneath, the employee utilized a chain-link hoist to lift the rear of the forklift. In the process of doing this, the employee's finger was caught between the chain-link hoist and the forklift counterweight, resulting in a left ring finger amputation down to the first knuckle.",0
An employee was repairing a hoist from a rolling ladder. The employee fell off the ladder and landed about 8 feet below. The employee was hospitalized.,1
"An employee tripped while walking down an aisle, falling to the floor on her left side and suffering a broken hip.",1
"An employee was on a rolling chair, watering plants. The chair slid out from the employee, who fell to the floor and suffered an L1 back fracture.",1
"An employee was driving a stand-up forklift. The employee fell off the forklift as it turned, landing on the concrete floor and suffering a broken hip. The employee was hospitalized.",1
"On 5/20/2020, around 12:20 p.m., an employee was walking down the stairs and tripped on the first set. The employee struck his head and received a fracture to the left wrist and a skull fracture. The employee was hospitalized.",1
"An employee performing groundskeeping activities was swarmed by bees, causing the employee to fall and break an ankle. The employee was hospitalized.",1
"An employee was going from the bag room to the main building when an overhead door started closing on her. She rushed to get through and slipped on the sandy floor, breaking her ankle.",1
"On May 21, 2020, at 1:00 a.m., an employee was checking the belt tension on a conveyor's serpentine belt when the conveyor activated and partially amputated the employee's finger.",0
"An employee was knocking risers off of castings using a sledge hammer. As he was swinging the sledge hammer, his left index finger was smashed between the sledge hammer handle and a part of the casting. The injury resulted in a soft tissue defect with an amputation at the distal aspect of the left index finger (no bone loss).",0
"An employee was shoveling hot asphalt when he started to feel unwell. Around the afternoon, after sitting in the shade and drinking some water, he became ill and required hospitalization for heat illness.",1
An employee was holding a flashlight for his partner who was cutting a bumper off a truck when the bumper fell on the employee. He suffered a broken jaw and a damaged nerve around the eye.,1
"Two employees were troubleshooting air actuation issues at a plastic injection molding press. One employee activated the press while the second employee was inside the press. The pin inside the press then struck the second employee's right arm, crushing the right elbow. The employee was hospitalized.",1
"An employee was labeling palletized 20-pound boxes suspended on the forks of a forklift. The boxes fell on her, knocking her to the floor and breaking her femur.",1
"An employee was climbing down from a truck and was 2 to 3 feet from the ground when his left foot missed a step, he lost his grip, and his right foot became hung up in a step. As a result, he sustained a right ankle fracture.",1
"An employee on a ladder was replacing cables on the side of a building at a height of 8 feet when the employee's foot slipped and was caught between two rungs. The ladder fell to the side, causing the employee to fall and hit the ground. The employee suffered a left leg fracture.",1
"An employee was helping to remove pipe from a structure when the pipe fell and struck the employee's right leg, fracturing the tibia and fibula.",1
An employee was working with a flammable membrane cleaner. The cleaner caught fire when the employee went to light his cigarette and both of his hands were burned.,1
An employee was carrying a 10- to 12-foot long metal channel up a metal ladder when he contacted an overhead power line and received an electrical shock. He then fell from the ladder. He sustained electrical burns and fractures.,1
"An employee was balancing a blower assembly that had a mechanical indicator with a magnet. While the blower wheel was moving to check for vibrations, his hand entered the assembly and it caught his thumb, resulting in a right thumb amputation. He was hospitalized.",1
An employee was herding cattle onto a truck when a calf broke away and ran over the employee. The employee suffered a fractured skull.,1
An employee suffered a partial amputation to his left middle finger when his hand entered the discharge chute of a hammer mill while it was operating.,1
"An employee was loading a truck for the day with rolls of fencing when he lost his balance and fell from the bed of the truck to the ground, striking and fracturing his skull.",1
"An employee fell about 5 feet off an 8-foot step ladder to the ground while putting up fiberglass panels, fracturing an ankle and wrist.",1
An employee was fixing leaks in and around reverse osmosis equipment when he was exposed to the exhaust of a high pressure washer. He became ill and collapsed due to carbon monoxide poisoning.,1
"On May 21, 2020, an employee was entering a pavilion through a doorway when she slipped and fell to the ground, fracturing her left tibia and requiring surgery.",1
"An employee was operating an up-cut saw to trim scrap material. The employee's left hand was in the point of operation when the saw was actuated via the foot pedal. The saw then amputated the employee's left middle finger to the second knuckle, the ring finger to the first knuckle, and the pinky fingertip.",0
"An employee was running a tagline of an elevated load (conveyor bed) during an installation. As the load was lifted, the tagline became twisted around the employee's thumb. As the load moved, the rope caused an open wound to the right thumb that resulted in a thumb tip amputation.",1
An employee was speaking with another employee when a forklift came through a roll-up door and struck him. He was hospitalized with a head injury and possible fracture.,1
An employee was removing a pump for a hot water heater when hot water burned his torso.,1
"An employee climbed a ladder to hang a banner for Memorial Day and fell off the ladder, resulting in a dislocated shoulder and a splinter in the hand. The splinter had to be surgically removed. The employee was hospitalized.",1
An employee was climbing a ladder to repair a piece of fascia when the piece of facia contacted a powerline. He received an electric shock and suffered second and third degree burns on 40 percent of his body (mostly his back and hands). He was hospitalized.,1
"An employee was transporting handheld power tools to another location when he slipped, engaged the handheld grinder, and lacerated the top of his left hand.",1
"An employee was working on a commercial roof when a chain fell on his hand, resulting in two possible fingertip amputations.",0
"An employee was felling a tree with a chainsaw. As he attempted to maneuver around the tree base, he slipped and lost his footing. As a result, he contacted the chainsaw with his left arm, resulting in a cut to his forearm and a fractured ulna.",1
"An employee was trimming an overhead limb off a felled tree when the tree branch fell and struck the employee. The employee suffered three fractured ribs, a collapsed lung, and a T-12 vertebrae fracture.",1
"An employee was cleaning up trash around a pumpjack unit. The unit turned on, caught the employee's shirt, and pinned the employee against the unit's fence enclosure. The employee lost some skin on the left leg, as well as torn ligaments in the left knee.",1
"An employee was jackhammering a concrete deck on the top level of a parking garage when the deck collapsed and he fell to the level below. He impacted concrete rubble on the floor and a piece of concrete slab that sheared from the deck, suffering a fractured femur, broken tibia, and cracked ribs.",1
"An employee was reinstalling a square pack blade back into an automated refuse truck. He went to reposition the come-a-long when the pack blade slipped and fell on his left leg, fracturing it.",1
"An employee was attempting to remove a TPU sheet from a TPU machine when her thumb was caught between two rollers, resulting in a thumb tip amputation.",0
An employee was working on a fan assembly line when their thumb became caught in a fan and was amputated.,1
An employee was cutting a soil nail to remove a whaler from an excavation protective system when the whaler tipped over onto him. The employee suffered a spinal injury and was hospitalized.,1
"An employee was cutting concrete form stakes out of 2""x6"" lumber laying on a couple of sawhorses. There was a nail embedded in a 2""x6"" that caused the saw to bounce when he cut into it. The saw bounced down onto his right leg, cutting his right inner thigh and requiring surgery.",1
"An employee was hoisting a steel plate. The employee's fingers were caught between the plate and another surface, causing amputation of the right little finger at the first knuckle.",0
"An employee was moving into a new office space and that had junk left in the office areas from previous tenants. He was taking a large piece of commercial glass to the dumpster using a dolly. As he was picking up the glass over his head to throw it in the dumpster, the glass broke and half went into the dumpster and the other half fell on his right lower leg, severely cutting it. He was hospitalized with a severed tendon.",1
"After performing general maintenance around a plant, an employee started experiencing muscle spasms and was hospitalized for a possible heat stress injury.",1
"An employee was drilling a water well. A single pipe rod holder malfunctioned and came down on the employee's little finger, crushing it.",1
"After disconnecting a clevis from an excavation bucket, an employee bent down to pick up a stack when the excavator operator turned the excavator. The bucket then hit the employee in the head, causing a neck fracture.",1
"An employee was tarping a load of lumber on a flatbed trailer when the employee tripped and fell off the trailer to the ground, suffering a laceration above the left eye and a broken left ankle.",1
"An employee was working in her designated area pulling parts when she slipped and fell to the floor, striking her left knee and forehead. She was hospitalized for her injuries.",1
"An employee was working on shop doors while standing on a step ladder when he fell to the ground and struck his head. He suffered broken ribs and a concussion, requiring hospitalization.",1
"An employee was attempting to move materials with a push dolly when he fell to the ground and fractured his right femur, requiring hospitalization.",1
"An employee was carrying a hot pot when it tipped over, hitting the employee's left hand and causing a burn.",1
"An employee was pulling an auger while standing on top of a scale house when the auger gave, causing the employee to lose footing and fall to the ground. The employee suffered a broken left arm, multiple broken ribs on the left side, and a broken pelvis.",1
"On Friday, May 22, 2020, an employee was unloading materials off a sky track lift on a third floor balcony when he fell approximately 20 feet to the ground. He was hospitalized with a hairline fracture on the jaw and a broken arm.",1
"An employee was climbing up a hill when he slipped and fell to the ground, breaking his leg.",1
"An employee was fixing the coin hopper in a coin recycler that would not dispense change. After emptying out the pennies and coin holders, she was closing the coin hopper when her hand was caught in the closing door. As a result, she suffered a left index fingernail amputation.",0
An employee was testing an HVAC system when the face of the pressure regulator blew off and hit the employee in the face. The employee suffered multiple fractures and lacerations to the face and a ruptured eardrum.,1
An employee was working on a hydraulic shear machine. He was attempting to turn a cylinder that was being processed when his fingers were caught in the shear. Two fingers were amputated.,1
"An employee slipped and fell to the floor while walking, breaking her femur.",1
"An employee was tasked with welding a pipe. As he was getting a cutting torch from a toolbox on a buggy, he became caught between the side boom of a pipelayer and the buggy. He suffered internal bleeding and damage to his small intestine, requiring hospitalization and surgery.",1
"An employee was helping operate a hydraulic mold press. The press engaged, crushing the employee's left index fingertip. The employee suffered an amputation to the finger.",0
"An employee was performing maintenance on a wheel loader (front-end loader) and removed an access plate to the bottom of the engine compartment. After the fasteners were removed, the access plate fell to the floor and crushed the employee's forearm between the plate and the floor. The employee suffered damage to the muscle and connective tissue (no broken bones).",1
"On May 22, 2020, an employee was walking across a wet mopped floor when the employee slipped and fell to the floor, suffering a compression fracture to the lower back. The employee was hospitalized.",1
"On May 22, 2020, an employee fell into a drainage ditch while walking to his car. He was hospitalized with broken ribs, a punctured lung, and bruises.",1
An employee was helping a forklift operator load material inside a truck when the employee was pinned between the material he was loading and the existing material in the truck. He suffered injuries in the abdominal area and was hospitalized.,1
"An employee fell to a concrete floor and hit her head, suffering a contusion and a small brain bleed.",1
"An employee was walking near a steel platform performing maintenance when the wire ropes holding the platform snapped, causing the platform to strike the employee. The employee was hospitalized with two fractured ribs, a punctured lung, and a slight fracture to the spine.",1
"An employee was working on a former. The employee stood up into a rail, fell, and suffered a concussion.",1
"An employee was using a rag to clean a conveyor belt on a bag flattener. The employee's arms were pulled into the nip point between the belt and an idler pulley, causing arm contusions, abrasions, and potential soft tissue damage.",1
An employee lost consciousness while applying spray for fire ant control at a commercial location. The employee was hospitalized to treat heat-related dehydration.,1
"An employee was closing a garage door when the employee's fingers were pinched between the closing door panels, resulting in the amputation of the left middle and ring fingertips.",0
"An employee was rigging the motor on a tower when his right hand was caught in a pinch point, resulting in an open fracture with an amputation of the right middle distal fingertip.",1
"An employee was on top of a trailer rigging steal beams so that they could be lifted when he fell off the trailer to the ground, injuring his right shoulder and lower back.",1
"An employee tripped on a mouse cord while standing up from a desk. The employee fell to the floor, suffering a broken humerus.",1
"On May 22, 2020, at approximately 12:00 p.m., an employee was working in a lab drive-through shed when she sprayed a wasp with wasp spray. The wasp started to chase her, so she ran. While running, she tripped and fell in the parking lot, fracturing both wrists.",1
"An employee was struck by a patient and knocked to the floor, requiring hospitalization and surgery on her neck and back.",1
"On 5/22/2020, an employee was breaking up a cast iron boiler with a sledgehammer when a metal fragment struck the employee in the eye, causing eye trauma that required hospitalization.",1
"An employee was leveling product on a store shelf 
when an errant vehicle crashed through the front of the store. The vehicle struck the employee on the right side of his body. He suffered broken bones in the right cheek, the loss of several teeth, and a right arm laceration that required stitches.",1
"On May 23, 2020, a UPS employee was walking out of the rear of a package car and onto the dock when he stepped on a package that had fallen out of his hand. He rolled and broke his ankle, requiring hospitalization.",1
"An employee was having his tractor filled with dry fertilizer. He was on the front section of the tractor's hopper box, about to perform a density check on the fertilizer, when he slipped. A sharp object on the tractor caused a degloving injury to the inside of his right index, middle, and ring fingers.",1
An employee was checking the voltage of an on-ground 150 kVA transformer when the transformer shorted out and shocked the employee. The employee was hospitalized.,1
"While conducting a taste test, an employee mistakenly grabbed a sample cup that contained sodium hydroxide, incurring chemical burns to the mouth and lip. The employee was hospitalized.",1
"An employee was opening an inspection door to clean inside a coal chute when his left middle finger was pinched between the door and the piping next to it, resulting in a fingertip amputation.",0
"An employee was material handling freight with a jack. When she advanced the jack, she was pinned between an upright beam and the jack. She suffered deep bruising in the liver area.",1
"An employee was assisting a customer. The customer pulled out a machete and attacked the employee, injuring her face, head, neck, and shoulders. She was hospitalized.",1
"An employee was on a stand inspecting aluminum rolls from a roller mill by taking sheets out to inspect for quality issues when he fell to the same-level concrete surface and hit his head, requiring staples.",1
An employee was performing preventative maintenance on a glass washer when the employee's right middle and ring fingers were caught and crushed in the nip point of the washer's belt.,1
"An employee was rolling a fully loaded cart down a truck ramp to deliver products to a retail store when the cart struck the edge of the truck ramp, causing the load to shift forward and the employee to lose control of the cart. The employee then fell off the ramp to the ground below, breaking the left tibia.",1
"An employee was working in the kitchen at a nursing home. The employee was on a two-step ladder to reach a pan on a top shelf when the employee lost balance and fell, fracturing the left femur.",1
"An employee was loading a gun safe into a customer's vehicle with three other employees. The employee was in the bed of the vehicle when the gun safe slid onto his left middle finger, causing it to be caught between the gun safe and the vehicle. The employee was hospitalized with a fractured left middle finger.",1
"An employee was working at a paper machine. As he was checking a label on a roll of paper, his foot was pulled into the conveyor. He suffered a broken toe and was hospitalized.",1
"An employee was performing cleaning services at a food processing facility when he tripped over a water hose and fell. As he attempted to catch himself, his finger was caught in a conveyor belt, resulting in a pinky finger amputation.",0
"At 8:47 a.m. on May 24, 2020, an employee was trying to pull a winch line from the back of a dozer when his left hand was pinched between the shackle and spool. His index and middle fingers were partially amputated.",0
An employee felt a sharp pain in the lower body while pushing a patient in a wheelchair. The employee was hospitalized for a bilateral hernia.,1
"An employee suffered a cut thumb while cutting chicken with a knife. While washing the cut, the employee fell, striking their head on the sink and the floor. The employee suffered a fractured skull.",1
"An employee was cleaning a welding table when he bumped the table with his body. A 150-pound part from a coal pulverizer then shifted and fell, pinching the employee's left pinky fingertip between the part and the grating on the table. As a result, his left pinky fingertip was amputated.",0
"An employee was on the roof of a fertilizer storage building, shoveling fertilizer that had spilled out through the hole in the roof. He slipped and fell down 20 feet of roof, then dropped 12 feet straight onto a trolley rail, then fell from the rail to the ground 18 inches below. The employee suffered three brain bleeds, a broken fractured left wrist, stomach injury, a kidney injury, a fractured eye socket, a pelvis fracture, a gash in the forehead (requiring stitches), and a cut that left skin hanging from his forehead.",1
"An employee was stocking groceries in the walk-in refrigerator when she slipped on the floor and fell, fracturing her tibia/fibula.",1
"An employee was getting back onto his tractor when he fell and struck a memorial, fracturing six ribs.",1
"On May 24, 2020,at approximately 11:30 a.m., an employee was operating a side-by-side UTV downhill when he realized the slope was too steep to negotiate. He attempted to reverse the UTV, and it flipped and rolled to the bottom of the slope. The employee suffered a fractured ankle.",1
"On May 25, 2020, an employee was moving a pallet by hand when she slipped and fell on the concrete floor. The employee was hospitalized with a fractured hip.",1
"An employee slipped on a wet floor and fell, fracturing her right knee. She was hospitalized.",1
"An employee was walking in the warehouse, picking parts for an order. The employee turned a corner and collided with another worker, head-to-head. One of the workers fell to the floor fracturing her left shoulder. The other worker was not injured.",1
"While changing blades on a machine, a blade fell and partially amputated an employee's right ring finger.",0
An employee was about to spray lubricant onto the chain and sprockets of a conveyor belt. He fell forward and his right index finger was caught in the moving chain and sprockets. The finger was amputated at the first knuckle.,0
"While helping to install a sanitary sewer, an employee became dehydrated and had signs of heat exhaustion.",1
"An employee fell to the ground while erecting scaffolding, suffering ankle and wrist fractures that required hospitalization.",1
"An employee was getting ready to use an oxy propane torch to cut some aluminum on or near empty 55-gallon drums that last contained tertiary-butyl alcohol. During lighting of the torch, vapors in a drum immediately adjacent to the torch exploded. The employee suffered second and third degree burns to the hands, face, chest, and stomach.",1
An employee was moving equipment from the grass to the pavement when the employee slipped and fell onto a jack. The employee suffered an internal abdominal injury.,1
"An employee was positioning a utility pole on a trailer when the pole made contact with the employee's foot, causing a foot injury.",1
"An employee was assembling parts of the all-wheel steering on a piece of agricultural equipment. A suspended strap failed and a heavy metal wheel dropped down on the employee's left index finger, causing an amputation.",1
"An employee was transporting goods on a two-wheel hand cart down a ramp from the back of a delivery truck when he slipped on the ramp, sustaining injuries to his back and neck and several broken bones.",1
"An employee was moving a pallet with an electric pallet jack when he took a turn and his leg went outside of the pallet jack and was struck by the pallet jack. As a result, he suffered a right ankle fracture.",1
An employee was positioning the end of a coil into the butt welder machine. As the employee pressed the foot pedal to close the pneumatic clamp his right index finger was caught in the clamp and amputated at the first knuckle.,1
"An employee was walking out of a patient room when her shoe caught the floor, causing her to lose her balance and strike a chair's wooden arm. She suffered three broken ribs.",1
"A piece of metal grating slipped after an employee replaced it in a storage rack. The employee was trying to push it back in place when the grate fell between two crossbeams, catching the employee's right middle finger against the storage rack beam and causing the amputation of the fingertip.",0
"An employee was stepping out of an excavator onto its right side track. He fell from the track to the ground, suffering a broken hip. He was hospitalized and underwent surgery.",1
"The left front wheel of a piece of material handling equipment rolled over an employee's left foot, breaking three toes.",1
"An employee was pulling a cart between buildings. The cart got stuck, then fell over onto the employee's right leg and broke it.",1
"An employee was adding a dry powder cleaning agent to a trolly wash tank when the mix reacted aggressively with the water and flashed onto the employee, causing third degree burns to the face and body.",1
"An employee was crushed between an electric pallet jack and a forklift while moving boxes, suffering broken legs and a shattered pelvis.",1
"An employee was on a barge, pulling rigging on top of a stack of steel pipe pilings. He fell off the end of the stack, landed on crane mats used as dunnage, then fell 7 feet to the deck of the barge. His right leg struck a 6-by-6 piece of dunnage lying on the deck, and he suffered a broken femur.",1
"While walking in an office hallway, an employee slipped on a mat from a 6-inch step, suffering a dislocated knee.",1
"An employee was working with a pipe grooving machine when an article of his clothing was caught in the machine. As he was attempting to remove the article of clothing, his right index and middle fingers were amputated by the machine.",0
An employee was disassembling a cubicle with a screwdriver when the screwdriver slipped and impaled the employee right below the right eye.,1
"On May 26, 2020, an employee was cutting concrete using a concrete saw when he slipped as he cut between a drain and a sidewalk. The saw cut his right knee, causing a 2-inch laceration. He was hospitalized.",1
"An employee tripped over an air hose, fell to the ground, and suffered a neck injury.",1
"An employee was adjusting a tractor trailer to put it on dolly legs when the trailer shifted, causing the trailer crank to spin and come down on the employee's head. The employee suffered a concussion and broken facial bones.",1
"A tractor trailer pinned an employee against a loading dock as it backed up. The employee suffered fractures to the ribs, hip, and back, as well as a liver laceration.",1
Employee tripped while stepping onto a curb and fell into a stone wall. The employee's purse snagged on the wall as she fell. She suffered a broken nose and left shoulder.,1
"An employee lost his balance while climbing down a ladder between the 22nd and 21st floor of a new construction and fell approximately 6 feet, breaking his right leg above the ankle.",1
"While using a leaf blower, a temporary employee removed a tube to the motor assembly. His left hand slipped into the blades and his left pinky fingertip was amputated.",0
"An employee was climbing up an extension ladder to secure it at the top. The bottom kicked out and the employee fell 17 feet to the ground. The employee was hospitalized with a bruised spleen and fractures to the leg, wrist, and ribs.",1
An employee was stepping onto a pallet jack when it turned into him. He suffered a cut to the top of his foot and a ruptured Achilles tendon.,1
"An employee was making his rounds to verify the mill was shut down when he noticed a wood block lodged in the trim/block conveyor underneath the trimmer. When employee moved the wood block, the conveyor belt started and his finger was caught between the block and the belt causing an amputation to the end of the right ring finger.",0
"On May 27, 2020, an employee was operating an automated trim saw. When the employee tried to remove a piece of wood, the saw blade caused an amputation to the employee's right thumb, index finger, and middle finger.",0
An employee was using a metal shear to manufacture live banding material. The shear amputated the employee's left ring fingertip.,0
"An employee was clearing loose product from the end of a bandsaw when the blade cut the employee's third finger, resulting in a partial finger amputation.",1
"On 5/27/2020, an employee was delivering mail to a residence. The employee approached the porch between a car and the yard, then stepped off the paved walkway and slipped on the mud on the irrigated yard. The employee fell, landing on the ground and sidewalk, and sustained a broken right elbow and abrasions to the knee.",1
An employee was unloading sheet metal from a shear press. His sleeve got caught on the edge of the sheet metal and his elbow sustained a severe cut.,1
"An employee was descending a set of stairs inside a facility. She fell, suffering a broken left ankle.",1
An employee was inside a fuel tank preparing to clean it out using a high-pressure water hose. The water was turned on and the hose whipped around and hit the employee in the arm causing a laceration. The employee was hospitalized and had surgery on his arm.,1
A team of three employees were removing wood panels from the wall. Two workers were at the top of the panel and one was at the bottom. The panel weighed approximately 90 lbs. It slipped out of the hands of the workers at the top and landed on the hand of the employee at the bottom severing the employee's left ring finger.,0
"While working on top of a rail car, an employee's leg got caught on the top of the rail car. The employee fell to the rail car surface and sustained a broken tibia and fibula.",1
"An employee was helping to move a piece of angle iron when it fell on his left index finger, resulting in a partial finger amputation.",0
An employee was trying to sharpen the blade of a guillotine at the end of a plastic extruder line. The blade cycled down and cut off the tips of his left middle and ring fingers.,0
"An employee fell to the ground while climbing a 20-foot portable ladder at a customer's residence. The employee suffered multiple fractured ribs, a shoulder fracture, and a back fracture with loss of feeling in the legs.",1
"An employee was painting a water tower with a pneumatic paint sprayer. While on top of the water tower, the employee slipped and fell over the edge striking the catwalk and then the ground about 100 feet below. He was hospitalized for multiple fractures. The employee was wearing a harness with a lanyard attachment, but the lanyard was not attached to an anchor point.",1
"An employee was standing on the floor inspecting parts for paint quality. When he was finished looking at a part, he starting walking backwards and tripped on a wooden pallet that was laying on the floor behind him. He fell to the concrete floor and fractured a hip.",1
"While doing touchup work on the second story, an employee fell 12 feet and was hospitalized for a fractured rib and a fractured left foot.",1
"After cutting paper from a roll on a rewinder, an employee tried to pull the paper out from underneath the spool. The spool came loose and pinned the employee's leg against a cart behind him, breaking the leg.",1
"While walking across a break area, an employee slipped on water in front of an ice machine. She fell to the floor, dislocating her knee.",1
An employee was closing the door to a storage box when his left thumb was caught between the storage box and the closing door. He sustained a partial amputation of the tip of the left thumb.,0
"While removing debris from a manure handling belt, an employee slipped and their hand was caught in the chain and sprocket drive system of the belt. The employee sustained amputations of the pinky and ring fingers at the proximal joints.",0
"Three pieces of metal, weighing approximately 250 pounds each, were being lifted using slings attached to an overhead crane. An employee was guiding the metal as it was lifted out of a rack. The metal pinched the employee’s finger against the rack resulting in the amputation of his right ring fingertip.",1
"An employee was rotating tires on a customer's vehicle. While carrying the tires from the rear to the front of the vehicle, the employee tripped over an air hose and fell. The employee's head struck a four-post lift, and the employee suffered a spine injury.",1
"An employee was delivering a package at a resident's home when a dog escaped out the door and attacked her. She received bites on the left leg (thigh near knee) and right leg (back of thigh), and her left thumb tip was bitten off.",0
"An employee tripped and fell while leaving his work area. He was hospitalized, suffering internal bleeding.",1
An employee was using a cart to deliver groceries to a customer when the cart's weight pushed the employee onto the ground. The employee was hospitalized with a broken hip.,1
An employee was chopping slices of bacon when the knife partially amputated her left thumb tip.,0
"After delivering a load of stone to the jobsite, the driver of the dump truck was checking to see why the tailgate of the dump truck was not closing properly. When he pushed the tailgate, it returned, trapping the fingers on his left hand between the bed and the gate. The ring and middle fingers were amputated to the first joint.",1
An employee was stepping off the lower step of an aerial lift platform when the employee's left knee struck an unknown object. The employee then fell backwards and landed on the sidewalk. The employee suffered a fractured kneecap.,1
An employee had been mopping and hand scrubbing spilled paint off the floor. The employee lost consciousness due to a possible heart attack. He fell and struck his head on a pallet jack.,1
"An employee was riding on the rear step of a rear-loading trash truck. The truck hit a bump and the employee fell off the step, suffering multiple lacerations, contusions, road rash, and a broken arm and nose.",1
"An employee was walking away from a patient when he chased her down and flipped her onto the ground. She landed on her head, suffering a hematoma and skull fracture. She was hospitalized.",1
An employee was unloading and restocking a delivery truck when she fell from the lift gate to the ground 4 feet below. She suffered a broken knee.,1
"An employee was on the top of a bulk trailer. The employee slipped between the guardrail system and the trailer, falling to the ground and suffering broken ribs, a punctured lung, and lacerations.",1
"An employee was cutting an 18-inch concrete pipe using a concrete saw. He was almost finished cutting it when the concrete saw locked in the cut, causing it to swing back and lacerate his jaw.",1
An employee injured their back while lifting equipment. The employee was hospitalized.,1
"While trying to move the drive-thru canopy back into place, an employee fell off a ladder. The employee landed on the concrete driveway and sustained a head injury.",1
"An employee was on a ladder, installing a window and removing trim. The employee fell about 11 feet to the concrete driveway below, suffering a back injury.",1
"An employee was moving a rolling ladder back into its designated storage location. The employee tripped over the stabilizer and fell to the floor, landing on her right side and suffering a hip fracture. She was hospitalized, requiring surgery.",1
An employee was installing a planter box at a private residence while standing on a ladder when the ladder slipped from the bottom and the employee fell to the ground. The employee was hospitalized with broken wrists.,1
A driver was loading new vehicles onto his auto hauler. After driving a vehicle onto the trailer he exited the vehicle and slipped. He fell about 4 feet to the ground injuring his heels.,1
An employee was grinding the flat surface of his welding table to remove old welds from a previous set-up. He was using a 5-inch angle grinder equipped with a cut-off disk. The disk disintegrated and fragments hit the employee causing lacerations to the stomach area. The employee also sustained internal bleeding as a result of contusion to arteries.,1
"An employee fell from a 2-foot-high platform to the concrete floor, suffering a broken hip.",1
An employee was going up a ladder when he slipped and fell 4 feet onto the ground. He sustained a fractured vertebrae disk and was hospitalized.,1
"At about 11:30 a.m. on May 28, 2020, an employee was clearing a clog from the classification system for a plastic media recovery system. When the clog cleared, the open adjustable rotor started to spin, causing amputations to the employee's left index, middle, and ring fingers (with bone loss to the furthest knuckle on the middle finger).",0
"An employee was checking a top seal machine to determine why the bags were not heat sealing properly when he contacted an energized 240 volt, 20 amp electrical wire and received electrical burns to his right hand.",1
"An employee was driving a checker vehicle when it collided with a truck that was backing up. The employee suffered a right superior articulating facet fracture of the C6 vertebra, a fracture of the left posterior tubercle at the C5 vertebra, a grade IV blunt cerebrovascular injury with distal reconstitution, abrasions to the left ear and left elbow, and decreased sensation in the right thumb and index finger.",1
"At about 11:55 p.m. on May 28, 2020, an employee was replacing a light ballast from an extension ladder. The ladder slipped out from under him and he fell about 8 feet to the floor, suffering a fracture to the back, a left heel injury, and lacerations to the head and fingers.",1
"An employee was standing on a concrete slab, examining a broken weld. He slipped on some wood chips and fell to the ground, suffering a broken leg. He was hospitalized and underwent surgery.",1
"An employee stood up from a chair, then lost consciousness and fell to the floor, fracturing her right arm.",1
An employee was adjusting a conveyor. The employee's right foot fell through a top plate and was injured by the conveyor.,1
An employee was moving soda bibs from around a soda machine when she suffered a pinched nerve in the lower back. She was hospitalized.,1
An employee was moving a backpack with a pair of lopping shears attached to the side when the shears opened and amputated his right index finger.,0
An employee tripped and fell down the stairs. He was hospitalized with broken ribs and other injuries.,1
"An employee was walking out of an office when the employee's right index finger was caught in the door jam as the door closed, resulting in a partial amputation to the top of the finger.",0
"An employee was moving a food cart down a cement ramp on a loading dock. She tripped and fell to the ground at the bottom of the ramp, and the cart landed (upright) on her ankle. She suffered a fractured vertebra in her back.",1
An employee was using a pair of vice grips to hold a piece of metal that the employee was grinding on a bench grinder when the vice grips came loose and hit the employee in the head.,1
"An employee was on a mower, trying to engage its emergency brake as it rolled downhill. The mower crashed into a pontoon boat (on dry land); the employee suffered three broken left-side ribs, a large laceration on the left leg, and a knee injury.",1
An employee suffered a back injury while lifting a box of apples. She was hospitalized.,1
"An employee experienced heat stress while delivering mail, requiring hospitalization.",1
"On May 29, 2020, an employee was placing decking on a nail machine. His left hand was crushed under the nail chuck.",1
An employee tripped and fell on the concrete floor while carrying a flat piece of cardboard to be recycled. There was a score in the concrete at the site of the fall but nothing was sticking up. She sustained a fractured left hip requiring surgery.,1
"An employee was operating a riding pallet jack when his left foot became jammed between the pallet jack and a shrink wrap machine, causing a severe left foot injury that required hospitalization.",1
"An employee was cleaning a bathroom when a stall door closed on her right hand. Her right ring finger was caught in the door hinge, resulting in a fingertip amputation and open fracture to her finger.",1
"An employee was working at a paper winder. He taped the paper to the core and it began to tear. While he was trying to grab the tail of the paper, the winder grabbed his right-hand fingers and pulled his hand in. He suffered fractures to his middle and ring fingers.",1
"An employee was cleaning a CNC lathe with a rag. The rag was caught between the pulley and the belt, and the belt amputated the employee's finger.",1
"Two employees were moving a cart, one pushing it and the other pulling it. They reached a point where they needed to turn, and as they did the second employee's right little finger was caught between the cart and a metal pole. The finger was amputated.",0
"While moving plywood on a roof, an employee stepped into a hole and fell 25 feet onto concrete. The employee suffered a broken femur, broken arm, broken ribs, and brain swelling.",1
"An employee was moving aluminum castings to be grinded when the end of a compressor tank blew off. Shrapnel from the explosion struck the employee, who was hospitalized with a head laceration and brain bleed.",1
An employee was repairing a breaker when energized wires burned the employee's right hand. The burns resulted in a finger amputation.,1
An employee was operating a saw when his hand slipped and his right pinky finger contacted the moving saw blade. He suffered an open fracture and partial amputation to his finger.,0
"An employee was carrying a propane cylinder bottle in the storage area. He was walking and removing the cylinder from the storage cage when he lost his balance upon turning and fell. The cylinder fell on his left hand, causing fractures.",1
Two employees were repairing a bearing on an ice resurfacer. One of the employees reached in to adjust the bearing and suffered an amputation to the right middle finger from the nailbed forward.,0
"An employee was working from a 12-foot A-frame ladder. A board he was working on broke away and he lost his balance and fell, landing on the concrete floor 7-8 feet below. He broke ankles, his hip, and a femur.",1
An employee was working on a piece of equipment when his knife slipped and went into his chest.,1
"An employee was using a gas trimmer to cut brush when he was stung by a wasp on the left arm. The employee swatted with his right hand across his body and made contact with the blades of the trimmer, amputating the tip of his right ring finger.",0
"An employee was loading meat product onto a conveyor belt when a piece of meat got stuck. As the employee was dislodging the meat, his finger was caught between the catch plate and the moving conveyor belt. He sustained a fingertip amputation.",0
"An employee was standing near a plywood manufacturing line. A piece of MDF board came down the conveyor path and was automatically ejected, striking the employee's right leg just above the ankle and breaking his tibia and fibula.",1
"An employee was cleaning a paving machine's hopper with a shovel. The employee noticed that the ""auto"" button was activated and tried to shut it off. The machine's front apron came down and caught the employee's right foot against the front bumper. He suffered a broken right foot, a broken left collarbone, and a burned right hand.",1
"An employee was loading parts into a foam press using a roll-in/out table. The table was moved by a chain and sprocket system. While the employee was pulling out the parts, the chain and sprocket caught the employee's gloves and amputated the employee's left index finger.",0
"An employee was walking toward a door entry when he lost his footing on the edge of the sidewalk and fell to the ground, suffering multiple fractures to his hip joint.",1
"At 4:20 p.m. on May 30, 2020, an employee was retrieving an object from an alligator pen when an alligator bit him on the right elbow. He was hospitalized.",1
"An employee was driving a fork truck. As his truck and another one approached each other, the employee's left foot was caught between the two. The foot was severely injured and the employee was hospitalized, requiring surgery.",1
"While troubleshooting on a natural gas train platform, an employee went down the stairs and fell to the ground, suffering a hip fracture.",1
"On May 30, 2020, an employee was bending parts on a press brake. The employee's left index finger was caught between a part and the bottom of the die. The finger was pinched, leading to the amputation of the fingertip.",0
"An employee was operating a forklift when it got stuck on low overhead ducts. As the employee tried to back up, his right hand was caught between the forklift's overhead cage and a duct. His little finger was amputated.",1
An employee was making iced tea when she noticed a clog in the brewing basket. She was pulling the brew bucket out to unclog it when hot water scalded her left arm.,1
An employee was struck by a steel board moving on a conveyor. The employee was hospitalized.,1
"An employee was changing the roll on a winder machine when the employee's hand entered the machine to cut plastic, resulting in amputation of the right index finger.",0
"An employee was loading a last-minute bag into the cargo bin of an aircraft. The belt loader that was normally used was pulled away, so the employee jumped from the ground to the cargo bin. The employee fell from the cargo bin and struck the back of his head on the concrete, suffering a traumatic brain injury, temporal skull fracture, and subarachnoid and subdural bleeding.",1
"An employee was helping a customer load a tool box into the back of the customer's pick-up truck. After loading the truck, he fell from the truck and landed on the ground, fracturing his right ankle. He was hospitalized.",1
"An employee was beneath a vehicle, welding, when a container of gas/tar caught fire. The employee suffered second- and third-degree burns to the arms and face and was hospitalized.",1
An employee was pulling the foot from a fence lag when he lost his balance and fell over the side of an 8-foot wall. He broke his left arm and was hospitalized.,1
"An employee was moving landscape timber. One of the timber cores fell off the loading table, crushing the employee's left little finger against the metal frame of the machine. The finger was later amputated.",0
An employee had been using a dolly to move a barrel. The employee hit his head on an overhead walkway while wearing a hardhat. He got back up and continued working until he later passed out and had a seizure. The employee broke his nose during the seizure. The employee was hospitalized.,1
An employee was installing pipes for highway construction. Two of the employee's fingers were crushed between a girder and a PVC pipe. The employee underwent surgery.,1
"An employee was setting up a medical cart when she tripped on a computer cord, fell, and landed on the floor on her back. She was hospitalized.",1
An employee pulling weeds at a private residence was bitten on the finger by a copperhead snake.,1
An employee was removing brackets from an exterior wall. The ladder he was using slipped out from under him and he fell to the tile floor about 6 feet below. He suffered a broken arm and was hospitalized.,1
"An employee tripped and fell while exiting a tractor, suffering a left ankle injury.",1
An employee was throwing appliance boxes over a third floor railing when the railing gave out and the employee fell approximately 24 feet to the ground. He experienced back pain and was not able to move his legs.,1
An employee was running copper wire into a large wooden take-up reel when his right foot and body were caught in the rotating reel. He suffered a broken left femur.,1
"An employee was walking towards his car in the parking lot after his work shift was over. A car backed out of a parking spot, then drove forward striking the employee. The injured employee sustained a laceration to his left foot.",1
Employees were decommissioning a tower. The tower collapsed while two employees were on it. One employee was hospitalized for a fractured pelvis and legs.,1
An employee was using a table saw to cut thin foam material when his glove was pulled into the blade and his right index finger was amputated.,0
"An employee was tucking cables into an electrical cabinet up the tower on a wind turbine when he was electrically shocked, suffering burns to the left forearm that required hospitalization.",1
An employee was driving a stand-on pallet jack to pick up a pallet when his hand was pinched between an I-beam and the handle bar of the pallet jack. Multiple fingers were injured and he sustained an amputation to the index finger just above the last knuckle.,0
"On 6/01/2020, at about 6:30 AM, an employee was cutting grass with a lawnmower when his foot slid under the lawnmower and contacted the blade. The big toe of the left foot was amputated, and other toes may have been fractured.",1
"While delivering mail, an employee tripped on the sidewalk and sustained a broken right ankle. The employee was hospitalized.",1
"An employee was applying manifolds to a coil. The coil got stuck on the stopper. As the employee pushed the stopper, the employee's glove was caught between it and the coil. The employee's left middle finger was fractured and partially amputated.",0
"While coming into work in the morning, an employee tripped going up the steps, fell, and broke their right arm. The employee was hospitalized for surgery.",1
An employee was walking from one cocoa processing machine to another when she slipped on a grated platform. The pulley belt on a husker machine amputated three fingers on her right hand.,1
An employee broke a leg in two places while crossing over a rollover draw machine.,1
"An employee was adjusting a fan when the rotating fan blade struck the employee's finger, resulting in a partial amputation.",0
"An employee was hanging chickens on shackles in the evisceration department. While removing a chicken from a hook, the employee's finger was lacerated by a double leg shackle resulting in a partial amputation.",1
"An employee was descending a step ladder when he slipped off the bottom step, stuck his hands out to catch himself, and struck the floor, breaking his right wrist.",1
"A machinist was filing a burr using a CNC lathe. The file ejected from the machine, hitting him in the abdomen and perforating his small intestine. He was hospitalized and underwent surgery.",1
"An employee torch-cut an expansion joint around a piece of ductwork at a cage mill. After removal of the last piece of expansion joint, the top pipe chute came down and caught the employee's right arm between the top pipe chute and the bottom pipe chute. The employee sustained a crushing injury to the right arm, requiring hospitalization for surgery.",1
"An ironworker was checking a bolt hole on a steel column to see why a bolt would not go into the hole. A steel beam (still attached to a crane) was being connected to the column. The beam shifted and pinched the employee's finger, amputating the left middle fingertip.",0
An employee was hospitalized after being exposed to iodoacetonitrile.,1
"An employee was operating a wheelchair outside when the wheelchair rolled over a curb and toppled, throwing her to the pavement in the parking lot. She suffered a broken hip and femur.",1
"An employee was installing a roof on a building. He was carrying a roof sheet up to the peak when a purlin broke underfoot. The employee fell to the ground about 20 feet below, suffering a broken hip.",1
An employee was helping an associate lift a side stack off a garden cart when he tripped on the lip of the cart and hit his face on the floor or a beam. He suffered a broken nose and was hospitalized.,1
"An employee was sitting under a patio having lunch when the entire structure of the patio collapsed. The employee sustained a fracture between the knee and ankle, requiring hospitalization and surgery.",1
An employee was wrecking on the first floor of a parking garage under construction. He placed a hand on a fence and felt an electrical shock through his arm. He was hospitalized with an increased heart rate and elevated blood pressure.,1
An employee was bleeding down a pressurized line that was being pressure tested when the head of the line burst off the line and struck his right arm. He was hospitalized with a fractured right arm.,1
"An employee was attempting to detain a patient and was pushed to the ground. He fell backwards and hit his head on the ground, requiring hospitalization.",1
An employee sustained lacerations to his face from the release of pressurized urea solids.,1
An employee was moving a scaffold when his thumb was caught between the I-beams. He broke his thumb and required surgery.,1
"Two employees were assembling part of a tree spade. A pin in the stabilizer leg was not aligning in its hole properly. One employee was trying to find the groove between two bushings in the pinhole when the pin was pulled out, amputating the employee's left middle finger.",0
"An employee was using a hand-held circular saw to cut a piece of wood lath. The blade contacted the employee's left index finger, resulting in an amputation down to the first knuckle.",0
"An employee was working on a press when the press operator started the machine. The press then crushed the employee's right hand, resulting in a finger amputation.",1
"An employee tripped and fell to the floor, suffering a broken pelvis. The employee was hospitalized.",1
An employee was brooming concrete on the third level of a parking garage under construction. The handle of the broom came into contact with overhead power lines. The employee suffered electrical burns to both hands and was hospitalized.,1
"An employee was exiting the building when she tripped on the floor mat at the employee exit and impacted the floor, resulting in abrasions on the face, an injury to the right wrist, and a hospitalization for a fractured L5 vertebra.",1
An employee was installing shingles on a roof and fell 30 feet from the roof to the ground. The employee suffered two fractured wrists and injuries to the mouth.,1
"An employee was organizing/cleaning around a wire bound machine when the employee's hair was caught on a rotating shaft, scalping the employee.",1
"An employee was driving home after work and became lightheaded. He pulled over, got out of the car, became disoriented, and stumbled into a ditch due to heat stress.",1
"On June 2, 2020, an employee was going to the parking lot to park cars. Thieves were stealing trucks from the storage lot and struck the employee with a vehicle. The employee sustained fractures.",1
"A driver was using a dolly cart to unload product from the back of a truck. His shoe got caught in the bumper as he was stepping down to the ground, causing him to fall. The employee was hospitalized with a broken lower right leg and had surgery.",1
An employee was struck on his left leg by a high-powered pressure washer and sustained a deep laceration.,1
"An employee was using a rod to clean coal ash out of a bin. The employee felt pain in his upper back, neck, and both arms and was later taken to the hospital.",1
"An employee was entering the company truck which was parked in the service bay between the automotive lift posts. The employee slipped and fell on same level inside of the automobile service area. The employee landed on his shoulder/back on an automotive lift arm, which was at ground level, and sustained a punctured lung.",1
"An employee was on the roof of a shop, retrieving a tree trimmer, when he fell through a skylight to the concrete floor 17 feet below. He suffered a broken wrist, elbow, and femur; kidney and liver injuries; and facial fractures.",1
"An employee was trying to dislodge a mattress that was stuck on a wooden pallet. The forklift that had loaded the mattress moved to the side, freeing it and causing it to pinch the employee's ring finger. The fingertip was amputated.",0
An employee fell down the front steps and sustained fractures to the left arm and elbows.,1
"An employee fell from a fixed ladder when it became unattached from the building, suffering a broken ankle.",1
"An employee was working on the roof, removing plastic coverings (formerly skylights) and replacing them with plywood. The employee fell 19 feet through an open space to the floor below. He sustained cuts, including cuts near his eye, a possible broken wrist, a possible dislocated finger, and a possible concussion.",1
An employee sustained an amputation to the right index finger while changing a bit on a router machine.,1
"An employee was clearing debris from a machine. Power was turned back on, and his right arm was pulled under a roller and broken.",1
An employee was performing maintenance work from a ladder when he slipped and fell off the ladder and hit his head on a concrete pillar. He suffered a traumatic head injury.,1
"While troubleshooting a jam in a laminator machine, the machine cycled and an employee's hand was caught and crushed in the machine, resulting in surgery and hospitalization.",1
"An employee was working in an attic installing tubing. When the employee finished and was heading back to the stairwell, he stepped on an old access hole and fell through to the concrete below. He suffered heel and vertebrae fractures.",1
"An employee was helping to reinsert a 10,000-lb. die set on a cupper. While pushing the die set in, the employee’s left hand was on the bottom of the die set, with the tips of his fingers in a recessed hole underneath the die set. As the die set slid into place, the employee's fingertips were contacted by the straight edge of the lower base of the cavity, resulting in the amputation of the index, middle, and ring fingertips.",0
An employee was trimming trees at a residential property. A limb fell and lacerated the employee's face. The employee was hospitalized.,1
"An employee was operating a battery-powered pallet jack. Its handle struck the employee in the abdomen, causing three broken ribs and a bruised liver.",1
An employee was installing insulating boots on a de-energized 5-kilovolt termination and suffered an electrical shock.,1
An employee suffered a hernia while bending over to pick up a pallet.,1
Two employees were in a scissor lift surveying storm damage on a roof panel. One of the employees fell from the lift cage to the concrete below and fractured their back.,1
"An employee was spackling from a baker's scaffold about 18-20 feet above a concrete floor. He fell, struck the ground feet first, and rolled, suffering muscle strains throughout his body.",1
"A foundry employee was using a hoist to move cast iron parts. He was overcome by the heat and was hospitalized, suffering from heat exhaustion.",1
"An employee was cleaning his work area when the strap holding a container rotator in a vertical position failed. The container rotator, and the container roll-in/out platform it was attached to, swung and struck the employee on the right upper torso and hip area. He suffered broken and dislocated ribs, a pelvic fracture, and fractures to lower-back vertebrae.",1
"An employee was sitting at her desk performing management tasks. A guest went to the front lobby brandishing a 9mm gun. The guest approached the employee, hit her in the head with the gun and then, as security approached the area, shot the employee five times hitting her on the arm three times. The employee sustained a head injury and gunshot wounds to the left arm.",1
"An employee was pushing the ripped wall of an intermodal trailer back into place from the outside. A piece of protruding metal lacerated the employee's right forearm near the wrist. The employee was hospitalized on June 3, 2020.",1
"An employee was offloading product from a multiple-head drill press. His right hand hit the turning bit, causing laceration to the back of the hand. He was hospitalized and underwent surgery.",1
"An employee was cutting plastic with a table saw. His left hand slipped, broke the guard, and was drawn into the blade. The employee suffered a partial amputation to the left little finger.",0
"An employee was cutting deli meat. The deli slicer cut the employee's left index finger and the employee was hospitalized, requiring stitches.",1
An employee was cutting a tree limb when he fell from an excavator's claw to the ground 15 feet below. He suffered broken ribs and a broken left femur and was hospitalized.,1
An employee was struck by the tracks of a mini-excavator and sustained a fractured ankle.,1
"An employee was climbing down a fixed ladder on a TV broadcast tower. The employee fell 25-30 feet to the ground. He suffered broken ankles, broken ribs, a punctured lung, and a spinal cord injury and was hospitalized.",1
An employee was backing an ATV toward a loading dock when it rolled off the dock. The employee suffered a broken ankle and possibly cracked vertebrae.,1
An employee was inspecting the paint job on a roof when he fell through a plastic sunroof sheet to the ground about 12 feet below. He suffered neck and head injuries.,1
"An employee was cleaning glue off the rollers on a laminator machine. The machine was turned on in reverse, catching the rag and pulling it into the rollers along with the employee's hand. The blades behind the rollers amputated two of her fingertips.",1
"An employee was starting a fire in a boiler. The fire flashed back, causing first-degree burns to the employee's hands and second-degree burns to the arms.",1
An employee was helping to load food boxes onto a school bus when he became overheated. He was hospitalized.,1
"On June 3, 2020, an employee was walking in an office when she felt a pain in her leg and fell to the floor. She was hospitalized, having suffered a broken femur.",1
"At about 8:55 p.m., an employee trying to dump waste into a large container using a forklift with a self-dumping attachment. As the forks were raised, the load shifted and pinched his left ring finger, partially amputating it. The employee was hospitalized.",1
"An employee was power-washing a vessel when the water stream struck his foot, causing a wound that became infected. He underwent surgery to clean the wound.",1
"An employee fell from an excavator, suffering broken ribs and a punctured lung.",1
"An employee was stepping over a 2-foot retaining wall while holding a 25-foot aluminum pole. The pole touched an overhead transformer fuse, and the employee was shocked. The employee suffered second- and third-degree burns to the leg, buttocks, and arm.",1
"An employee was unloading freight at a store. He fell while bent over a pallet of product and landed on his back, suffering a lower-back fracture. He was hospitalized.",1
"An employee had removed an extension rod from a load and was about to put a shorter extension in its place. The load tipped over and fell on his right arm, pinching it between the metal staging rack and the retort of the load. The employee suffered a broken bone above the elbow.",1
"An employee was traveling through a warehouse on a pallet jack. She slipped off the jack and it ran over her right leg, causing a laceration from the ankle to the knee.",1
An employee was spraying sanitizer when she tripped on a crack in the concrete and fell. She suffered multiple fractures to her left arm and was hospitalized.,1
An employee slipped and fell while bringing in shopping carts. His leg was broken and he was hospitalized.,1
An employee was cutting up felled trees. The tree supporting the tree he was cutting snapped back and struck the employee in the knee. The employee suffered a fractured knee and torn ligaments.,1
An employee was filling a fruit display and tripped over a shopping cart resulting in a fall. The employee sustained a broken hip.,1
An employee was cleaning a cheese blender when it partially amputated three of the employee's fingers.,0
"While placing a fiber line at a residential property, an employee became ill from overheating.",1
"On June 4, 2020, an employee was working from a ladder, pulling cable. The employee fell to the floor, landing on their feet and breaking both heels. The employee was hospitalized.",1
An employee was monitoring tubing as it exited the run-off table into a bin. A piece of pipe struck him as it was falling into the bin causing a laceration to the right upper arm.,1
"An employee was stocking merchandise in an aisle. When she knelt down, glass on the floor punctured her right leg beneath the kneecap. She was hospitalized, undergoing surgery.",1
"An employee tripped and fell, suffering a dislocated left elbow and a broken left wrist that needed surgery.",1
An employee was draining glue from melted adhesive. The glue severely burned his fingertip and he was hospitalized.,1
"Two employees were installing braces on trusses. One of them was using a nail gun when it struck the other employee's head and discharged, firing a 3 1/2-inch framing nail into his head.",1
"An employee was moving a wire feeder when its safety latch failed and its lid slammed shut, amputating the employee's left index fingertip at the first knuckle.",0
"An employee was untangling wiring in a suspended electrical pole. The pole slipped in its rigging, pinning the employee's right middle finger against the base. The fingertip was lacerated.",1
"An employee was reinstalling an auger housing. The housing came down and injured the employee's right index finger, resulting in a fingertip amputation.",0
"An employee was installing a 550-pound blower on a generator engine. While the employee was raising the blower into position with a half-ton chain, the blower was caught between the generator and its A-frame. While being pulled loose, it swung and caught the employee's right little finger against the generator's A-frame. The employee suffered an amputation to the finger.",0
"After a shift using a backhoe to move dirt on a median, an employee developed heat-related illness and was hospitalized.",1
"An employee opened a paint oven door to unload a cart of parts from the oven. As he was reaching into the oven, the door hit the left side of his forehead above the eye. He fell to the ground and the door of the oven broke loose from the chain, then fell onto him. He suffered a broken hip, a broken thumb, and a cracked heel bone and was hospitalized.",1
"An employee was dumping a manual trash hopper. The hopper pinched four of her fingers, causing injuries that required surgery.",1
"An employee was cutting a chain when it broke and struck the employee's hand, breaking his finger. He was hospitalized.",1
"An employee was using an electric pallet jack to move merchandise in a warehouse. The jack pinned the employee's leg against a bollard, breaking it.",1
"While walking through a wooded area, an employee tripped on a tree root and fell to the ground. She suffered a broken pelvis and a dislocation femur.",1
An employee was dislodging a rock from a concrete mixer when the mixer amputated one of the employee's fingers.,0
"On June 4, 2020, after working from 8:00 a.m. to 6:00 p.m., an insulation installer began having dehydration-related cramps. He was hospitalized.",1
An employee was placing a bag of marinara sauce in hot water. The water overflowed and burned the top of the employee's left foot.,1
"An employee fell and the knife he was holding cut his left leg. He was hospitalized, having suffered nerve damage that required surgery.",1
"On June 4, 2020, an employee was trying to get a cow to move from a scale. The cow stood up and pushed the employee against a fence, causing fractures to the left hip, pelvis, and sacrum. The employee was hospitalized.",1
Two employees were using an overhead crane to lift a steel column that was interlocked with a second steel column. The columns were side-by-side standing on the floor. Employee 1 attached the lifting device to the second column. When Employee 2 lifted the second column it swung and caused the first column to fall over and land on top of Employee 2. Employee 2 suffered a broken left femur and lacerations to the right leg.,1
"An employee was cleaning a dough auger when it caught the employee's right hand, amputating three fingers.",1
"An employee was carrying a box, stepping from a loading dock into his truck. He fell between the truck and the dock, and the truck's bumper severely lacerated his lower right leg.",1
An employee was cutting PVC pipe on a chop saw. The employee's left hand slipped and the sawblade amputated the tip of the employee's thumb.,0
"An employee was on a 10-foot A-frame ladder (at about the fourth rung) when he fell to the concrete ground. He suffered head injuries requiring four staples, as well as a compound wrist fracture.",1
"An employee was limbing a tree when the tree rolled, crushing his left lower leg and causing a compound fracture.",1
"An employee was picking up trash in the highway median. A vehicle hit the employee, causing broken ribs, a fractured neck, and a broken leg.",1
An employee was trying to remove a piece of paper stuck in a machine. The machine crushed three fingers on the employee's right hand.,1
"An employee fell from a ladder to the ground, suffering a broken right femur.",1
"An employee tripped over a vacuum cord and fell, suffering a broken hip.",1
An employee was using a scraper to clean the inside of a pretzel auger machine. Her hand was caught and injured by the auger's spinning coil.,1
An employee was changing the chain tension on a machine. The chain caught his hand and amputated his right index finger. He was hospitalized.,1
An employee was backing up a tractor when it rolled onto its side. The employee fell to the ground and suffered a back injury.,1
An employee was operating a forklift when it ran into storage racks. Her left foot was caught between the forklift and a rack. The foot was broken and toes were amputated.,1
"An employee was riding on the back of a truck cab, training a new hire. As the tractor backed up, the fifth wheel of the tractor did not engage the trailer pin and the tractor continued back into the front of the trailer. The employee was crushed between the two and suffered a broken leg and a broken pelvis.",1
"An employee was folding linens and moving items at a warehouse where the temperature was 86.5 degrees F. Suffering from heat stress, the employee became dizzy and was hospitalized.",1
An employee was retrieving formwork materials off a pickup truck. He fell to the ground and suffered a skull fracture.,1
"An employee was making a seal by combining the top and bottom plastic at the infeed of a fold and roll machine. While adjusting the plastic, the front heat seal bar began sequencing and came down onto the employee's arm, pinning it in the machine. The employee was hospitalized with burns and bruising to the right forearm.",1
"An employee experienced breathing difficulty after opening a bucket of pool chemicals, requiring hospitalization for a collapsed right lung.",1
"On June 5, 2020, an employee was working at his machine. The floor in his work area was being cleaned with a cleaning solution. The employee was overcome by the vapors from the cleaning solution and had difficulty breathing.",1
"An employee used a hook to pry up a cast iron manhole cover to check if water was flowing through the drain system. The cover slipped from the hook and fell on his right middle fingertip, causing an amputation that included bone.",0
"While welding with a wire fed welder, an employee stood up, lost his balance, and his hand caught the hot wire tip on the welder. The employee was hospitalized with a swollen and burned index finger.",1
"An employee was powder coating racks in a paint booth. The employee lost consciousness in the paint booth and was hospitalized for acute respiratory failure, heat stroke/malignant hyperthermia, acute renal failure and septic shock.",1
"An employee was cleaning a conveyor. The employee's rubber glove and rag got caught between the turnover of the belt and the ending piece of metal, causing the amputation of the left little finger, a fracture to the left ring finger, and a laceration across the left palm.",0
"An employee was driving a powered industrial truck. As it turned, the employee's right foot was raked between the machine and a rack, causing a cut to the foot/heel.",1
"An employee was at a weld press printing station, performing a product change using an overhead crane. His left ring finger got caught between the lock collar and the gear sleeve, causing the amputation of the fingertip.",0
"On June 5, 2020, at 3:30 PM, an employee was helping a customer load lumber onto a lumber cart. The cart tipped onto the employee's arm. The employee was hospitalized with a fractured left forearm.",1
An employee was struck by a telehandler while inspecting it before use. The employee was hospitalized for a tear to the small intestine.,1
"An employee was walking into a wind tower to check on a restart failure inside the cabinet at the base of the wind turbine. An arc flash caused burns to the employee's chest, neck, and face.",1
"An employee was getting out of a parked semi cab. He slipped and fell to the ground, suffering a tear to his spleen.",1
An employee was unjamming a ring from a compounder machine when the machine finished a cycle and amputated the employee's left middle fingertip.,0
"An employee was working from a scissor lift, doing maintenance on an overhead gantry crane. The crane moved and pushed the scissor lift over. He fell and was impaled on a piece of equipment on a table below, suffering internal injuries. He was hospitalized.",1
"On June 5, 2020, a utility cart and a golf cart collided. The golf cart's driver fell out of the cart and suffered a hip injury. The employee was hospitalized.",1
"On June 5, 2020, an employee was straightening a sheet of veneer from the out-feed of a dryer machine. The employee's left hand and glove were caught in a chain and sprocket in the machine, causing amputations to his left little, ring, and middle fingers at the first joint and his right index fingertip above the first joint.",0
"An employee had placed a piece of sheet metal into a folding machine and was operating the machine when the metal slipped further into the machine. The top plate came down on the employee's left middle fingertip, causing an amputation.",0
"An employee had been loading a mail truck when she was found unconscious on the ground. She was suffering from brain bleeding, having struck her head.",1
"An employee fell through a skylight on a roof, landing on the floor below and suffering a broken leg.",1
An employee fell about 6 feet from a communications repeater affixed to a building. He suffered fractures to both heels.,1
"An employee was using a saw to cut metal roofing materials when he slipped and his left hand contacted the saw blade, resulting in full index, middle, and ring finger amputations.",1
An employee was cutting meat with a meat saw. The saw amputated part of his finger.,1
"An employee was guiding a wall into place. The wall came down on the employee's left index finger, amputating part of it.",0
An employee who had been irrigating mushrooms fell through open floorboards to the level below. The employee was hospitalized with a head laceration.,1
"An employee fell through a floor hole in an elevated platform, landing about 6 feet below and suffering a head laceration.",1
"An employee was trying to unjam a pulley on a forming machine when the wire rope on the pulley let go and pulled her thumb under it, causing a partial amputation.",0
An employee was holding a small plastic cap in his teeth while preparing to take a carbon dioxide sample. The cap went back into his throat and became lodged in his trachea. The cap eventually became logged in his lung.,1
"An employee was aligning a pump on its base when it slid and smashed his fingers, causing amputations to his fingertips.",1
"On June 5, 2020, an employee was using a table saw to cut wood trim when the blade caused lacerations to the middle finger, index finger, and thumb of the left hand requiring hospitalization.",1
"An employee was operating a powered pallet jack. As he was turning in a warehouse aisle, his left ankle was pinned between the pallet jack and a product.",1
"While delivering mail, an employee was startled by a dog causing him to back up and fall over a rail, landing on the ground 12 feet below. The employee was hospitalized with two skull fractures and a broken wrist.",1
"An employee was standing on the intermediate platform on the 22nd floor, holding the end of a concrete chute. He was casting the lower section of a set of stairs which spanned between the 22nd and 23rd floors. The concrete chute hung from a concrete hopper that was set up on the 27th floor, and consisted of a series of chutes fastened to one another by interlocking chains on either side. The employee felt a violent jerk and the chute, which was filled with concrete, slammed into his right knee and leg. He lunged forward and fell down to the framed lower stairs. The rest of the chutes continued to fall from above. The employee sustained a fractured femur and was hospitalized.",1
An employee was using a circular saw to cut a plastic drum when the saw skipped/slipped and caused a cut to the bones in his left forearm just above the wrist.,1
An employee tripped over a metal grate while walking into a building at a construction site. The employee fell forward and extended his left arm toward the wall adjacent to the doorway to prevent himself from falling. His arm struck the wall and the humerus was broken. The employee was hospitalized.,1
"An employee was pouring corrosive cleaning chemicals into equipment when some of the chemical splashed onto the employee's wrist, causing chemical burns.",1
"An employee was driving a stand-up forklift through an aisleway. The forklift ran into a support column, pinning the employee's left leg against the column. The employee suffered a leg injury that required surgery.",1
"An employee became faint while directing a queue outside. The employee was hospitalized, suffering from heat exhaustion.",1
"An employee was trying to get animals from their enclosure inside for the night. He opened the door for the smaller, siamang animals, but one of the animals would not go inside. As he went to retrieve his keys from the open door, an orangutan in a separate enclosure grabbed his hand and bit him. The employee suffered a puncture wound on his right forearm and a broken finger on his right hand. He was hospitalized for treatment.",1
"An employee was spotting a forklift as it pulled forward into a storage building. The employee's foot was caught under the forklift's wheel, and the employee suffered a broken foot/lower leg.",1
An employee was walking from the water cooler back to the table when her leg gave out. She landed on the floor and sustained a fractured hip requiring hospitalization and surgery.,1
"An LSC Communications security guard was performing security checks throughout the facility while operating a three-wheeled electric cart. The cart struck a vertical steel I-beam, causing the employee to continue forward and contact the edge of the I-beam and then fall to the concrete floor. The employee was hospitalized with lacerations on the forehead and nose, and fractures to the forehead and right cheek bone.",1
"On 6/6/2020, an employee received an electrical shock to his left hand and right forearm while performing a harness connection to a solar module. The employee was hospitalized.",1
"An employee was removing a slab from a paper roll (to address two breaks that had happened near each other on the paper machine rewinder). The employee was tucking the paper back into the infeed between the bed roll and the finished roll when the nip point pulled the employee's arm in, about to the elbow. The employee suffered soft tissue damage.",1
"An employee was walking down steps when he fell to the cement ground, suffering ligament damage to his knee.",1
"An employee was standing in a basket getting ready to repair a downed powerline. While attempting to attach a ground wire to the top of a neutral wire on a pole, the employee received an electrical shock.",1
"An employee was using a napkin to wipe away dirt on a macerator machine. The employee's left hand was pulled into the machine, and its knives amputated two of the employee's fingers.",0
Two employees were working on a pad mount transformer. One employee tripped on a rock and fell into the open equipment. An arc flash burned the employee's left hand and arm.,1
"An employee was cleaning floors in a deli. The employee slipped over a deli slicer stand leg and fell to the floor, suffering a broken hip.",1
"An employee had climbed a 10-foot ladder to unhook a chain from a crane when he fell from the ladder to the ground, suffering multiple vertebrae injuries and a fractured clavicle. He was hospitalized.",1
An employee was walking in the break room when her right foot caught the leg of a chair causing her to fall on her right side and fracture a hip.,1
An employee was climbing down a ladder into an 18-wheeler trailer to change out the load level indicator. The leg of the ladder shifted and the employee fell approximately three feet into the trailer breaking their lower right leg.,1
"A part being machined with a CNC machine hit a door on the machine where an employee was working. The door in turn hit the employee, bruising the employee's torso.",1
An employee was repairing a pipe joint and was inserting another pipe. His finger was at the edge of the pipe and when he inserted the pipe section his fingertip was amputated.,0
"An employee was on top of a concrete finishing machine to reach a generator that was mounted to the unit. As he was moving the generator, the plywood it was sitting on gave way. The employee fell from a concrete finishing machine to the ground; the generator fell on his leg, breaking his left shin and foot.",1
"An employee was dismantling a car. While the employee was cutting out a seat belt with a box cutter, the cutter severely lacerated the employee's left index finger.",1
A temporary employee had been closing a door. A forklift backed into the employee causing a broken leg that required surgery.,1
"An employee was directing the driver of a truck. The truck's right front tire drove over the employee's lower left leg (below the knee) and onto the right leg near the calf. The truck was then backed off the employee. The employee was hospitalized with swelling, a contusion, and a blood clot.",1
An employee was approaching a resident to collect enumerating data and was bitten on the right calf by a dog causing a laceration.,1
An employee was starting a roll of metal building insulation. His right hand was caught in the roller and pulled in. The employee sustained a broken right hand.,1
An employee was unclogging a dust collector on a binder machine. The machine amputated the employee's left middle fingertip.,0
"While jack hammering concrete, an employee slipped and fell 5 feet.",1
An employee was removing concrete with a jackhammer when he made contact with a buried electrical line and received an electrical shock.,1
"An employee was sitting in a buggy entering measurement data for drilling, when he started feeling ill. He was hospitalized with heat stroke.",1
"An employee was working on the demolition of electrical wiring in a school. The employee fell from a ladder to the floor, sustaining a cut on the head and broken ribs.",1
An employee was driving a truck on a construction site when it overturned. The employee sustained a head injury and was hospitalized.,1
An employee was handing out water when he stepped into a walk-behind trowel machine that was running. The employee was injured by the blade of the walk-behind trowel resulting in hospitalization.,1
"An employee was waiting to disconnect a box blade attachment from a tractor. The attachment rolled onto the employee's right foot, crushing the tip of the big toe.",1
"An employee slipped on oil in a dry storeroom and fell to the floor, suffering a dislocated right elbow and a broken right arm.",1
An employee drove a forklift into the aerosol room with a pallet of product on the forks. She drove down the back driveway to the aisle of racking she needed to turn into. The forklift drove through salt brine that was on the floor and slid into a concrete bollard at the end of that aisle. The employee's left foot got caught between the bollard and the forklift. The employee was hospitalized with four broken toes and a laceration to the left foot.,1
"An employee slipped and fell on a wet kitchen floor, suffering an injury to the right hip. The employee was hospitalized.",1
"A technician was removing a drive shaft from a truck. He disconnected the drive shaft from the transmission and then unbolted the swing bearing. When the shaft came free, it fell off the transmission jack that was supporting it and landed on his right hand. The hand was crushed and the pinky finger was amputated.",1
An employee fell in a parking lot. His head struck the pavement and he suffered a brain bleed.,1
"An employee was preparing to install a piece of steel angle iron when it fell from the top flange of a beam, striking the employee and causing a shoulder injury that required surgery.",1
"While walking, an employee tripped on a pallet and fell breaking his lower left leg.",1
"On June 8, 2020, an employee was walking to their car after their shift and was struck by a customer's vehicle. The employee was hospitalized with injuries to multiple body parts.",1
"The injured employee was building a tubular scaffold to do a stucco repair on a condo. While the injured employee was receiving a scaffold frame, the employee that was handing the frame lost their grip on it, and the injured employee fell 15 ft. with the frame in hand. The injured employee sustained a compound fracture to the right leg and a laceration to the forehead.",1
"An employee was preparing a dock plate for a truck that had just arrived at a loading deck. The employee fell from the dock plate and the truck, suffering multiple fractures to the left leg and cracked ribs on the left side. He was hospitalized.",1
"A gas powered concrete buggy began to roll down a concrete driveway. An employee attempted to stop it and was struck by the buggy, sustaining a broken leg.",1
An employee was hospitalized after falling off a ladder while inspecting a battery on a crawler crane.,1
"An employee was pulling a cart of waste onto a freight lift. He fell approximately 4.5 feet off the lift and landed on the floor. The employee sustained a fractured clavicle, fractured pelvis, and three broken ribs.",1
"An employee was taking apart a flange to a 2-inch pipe. Alkaline product inside the pipe sprayed onto his forehead, upper chest, and abdomen. He suffered chemical burns in those areas, including third-degree burns to the chest and abdomen.",1
"An employee was laying down string line on the ground for an asphalt paving crew when an asphalt delivery truck backed into the employee, knocking him to the ground, and then running over his foot. He required stitches to the underside of his foot where the toes connect.",1
"An employee was catching metal plates. The material was binding and sliding down after it was cut. The employee's right middle finger was caught between the stop and the material, sustaining a partial amputation.",0
An employee was operating a thread-rolling machine. Her hair got caught in the machine and her scalp was removed.,1
"An employee was attempting to release the pressure on a breaker (excavator attachment) to remove it from the machine. The equipment's thumb released and came down, pinching the toes of his left foot between the breaker and thumb. The third toe was partially amputated.",0
"An employee was unloading a 48-inch steel roller form a 40-ton trailer. The roller lost traction, causing it to turn 90 degrees and flip over. The right side and part of the roller landed on the employee's right foot, severing the toe next to the big toe.",0
"An employee fell while coming down a ladder, missing the last two steps and landing on the ground. The employee's femur was broken near the hip.",1
"An employee was cleaning a pie maker when she hit the release button, which caused the roller to close on her left hand. This resulted in an amputation of the left pinky and ring fingertips.",1
An employee fell off a ladder after receiving an electrical shock from a live conductor. He landed on an office partition and sustained broken ribs.,1
"After working at an outdoor job site, an employee became overheated, sat on the steps of a truck to rest, and then lost consciousness. After awaking, he was hospitalized.",1
"An employee was cutting up tree logs and branches, while on the ground, when the chainsaw he was using kicked out and caught his left leg. He sustained severe cuts to the calf and was hospitalized for surgery.",1
"An employee ascended stairs to make a delivery, then missed a step coming down and fell to the ground. The employee suffered a fractured left arm, right femur, and kneecap, as well as a fracture to the nose or sinuses.",1
A steel coil fell off a forklift and landed on an employee's leg resulting in a broken femur.,1
"An employee was directing a forklift. The forklift picked up a load, backed up, and ran over the employee's left foot and leg, causing fractures and severe lacerations.",0
"An employee was standing on the tail of a truck and a dock plate to close the door. The bobtail pulled out of the dock door and the employee fell, landing on the cement about 4 feet below and suffering a dislocated knee.",1
An employee's left thumb was amputated while using a powered circular saw.,0
An employee woke in the middle of the night feeling ill and was hospitalized with a heat-related muscular injury.,1
"After cutting a board on a table saw, an employee was walking away from the saw when he tripped. His left hand came into contact with the saw's spinning blade; the index fingertip was amputated and the thumb was broken.",0
"An employee was hooking two trailers. As the employee was positioning a converter dolly at the first trailer, the dolly started to roll toward him. His left thumb was caught between the dolly and the lead trailer and sustained an amputation.",0
"Two employees were pulling wires on the scissor lift. While maneuvering between a door, the scissor lift caught the face of one of the employees against the door of the electric building. The employee sustained neck and back injuries.",1
"A brace surrounding the photo eye on the stretch wrapper machine was loose, causing the photo eye to be misaligned. This caused the chain to stop on the conveyor. An employee knelt down to adjust the brace. His hand was on the chain guard on both sides of the brace when the photo eye became aligned and the chain started up again. The chain caught his right middle finger causing a partial amputation to the distal phalanx.",0
A Sysco delivery driver was delivering to his last stop. He felt cramps all over his body and was hospitalized with dehydration.,1
"An employee was on top of a press machine when his foot slipped into the press, becoming trapped. The press came down on his foot, breaking toes and amputating three toes.",1
A carpenter apprentice was assisting in building a form for a turbine pit when he fell approximately 5 feet to the concrete below. He landed on his left arm and sustained a broken humerus and elbow.,1
"An employee was on a ladder. When he tried to adjust it, he and the ladder fell. The employee sustained a broken tailbone.",1
An employee was using a circular saw to remove a silt fence so a truck could back down the path to the work area and lacerated (soft tissue and muscle) his left leg. The employee was hospitalized.,1
"Two employees were in a fabrication shop, working on opposite ends of a 30x150 steel beam. One of them reached out to push/stop the beam as he was trying to move out of its path, but the bottom flange caught his left foot, causing a laceration and broken bones. He was hospitalized.",1
"An employee was operating a duct line. As the employee was adjusting the feed, the duct line amputated his right little finger. The machine was not locked out/tagged out at the time.",1
"An employee jumped over a counter and fell, sustaining a fractured left ankle.",1
"An employee was adjusting a 6-inch gutter coil machine. The machine was actuated and caught his finger, amputating the fingertip.",0
"An employee was surveying a sewer system. His camera equipment touched an overhead line, causing an electrical arc that burned the employee's feet (most severely affecting the left foot).",1
"Two employees were trying to fix a bar on a spreader truck. One of them was holding the bar when it snapped into place and pinched his gloved left hand, injuring the left little finger. The finger was surgically amputated.",0
An employee was hydrostatically testing a vessel when it ruptured. The employee suffered facial lacerations.,1
"While an employee was disconnecting a sling, an I-beam slid downward pinching the employee's finger. He sustained an amputation to the left ring fingertip.",1
"An employee was doing lawn care work when, suffering from heat stress, he began vomiting and suffered cramping in his feet.",1
"An employee was getting out of a truck when he fell about 30 inches to the ground, suffering a possible broken hip. He was hospitalized.",1
"On June 9, 2020, an employee was operating a full-revolution mechanical power press. The employee's right index finger got caught in the die, sustaining a partial amputation.",0
"An employee was inserting an oxygen lance into a furnace to melt metal that had solidified over the argon injection ports. Molten metal splashed out onto the employee's face and neck, melted the employee's face shield and safety glasses, and caused first- and second-degree burns over five percent of the employee's face and neck. The employee was hospitalized.",1
"An employee was cutting boards with a compound miter saw when the blade cut his fingers, resulting in amputations to his left ring, middle, and index fingertips.",0
An employee fell off a 6-foot ladder while pruning a tree. The employee struck a hard surface and suffered several broken ribs and vertebrae.,1
"An employee was making a mail delivery. While running from a dog, the employee fell to the ground and fractured her left tibia.",1
"An employee was using a dolly to take packages up a stairway. The employee fell down the stairs, suffering a broken femur. The employee was hospitalized.",1
"A support for erecting a solar array was being driven into the ground, but had stopped due to an underground obstruction. An employee was re-connecting a chain to the ground support when the puller ram machine activated, causing the chain to rise up and tighten around the support and catch the employee's finger. The employee sustained an open fracture, laceration, and hematoma to the index finger.",1
"An employee was climbing down a wall. The wooden cross-bracing failed when the employee stepped on it, and the employee fell 10-12 feet. The employee suffered a broken left kneecap and a broken nose, and was hospitalized.",1
"An employee was driving a forklift, raising and lowering equipment for an AC repairman to work on a unit. As he lowered the equipment on the forklift, a freon canister started to roll off the pallet, and the employee jumped off the forklift. The forklift was moving slowly and struck the employee's lower right leg, causing multiple fractures and torn ligaments.",1
"A service clerk was helping a customer in the propane tank area. As he was exchanging a propane tank, a propane tank that was on a shelf fell and fractured the second toe on his right foot. He was hospitalized and had surgery on his right foot.",1
"An employee was helping to guide a home elevator piston onto a jack stand. While the chain-fall was being lowered, his thumb was pinched between the bottom of the piston and the top of the piston jack. A bone in the left thumb was crushed.",1
"After climbing an attached ladder to retrieve packages from a conveyor, an employee began climbing down the ladder when he fell off and hit his arm on the top of a control box. He punctured his right inner arm and was hospitalized.",1
"An employee was attempting to cut a small piece of tape that was taped around multiple wires with a splicing knife when he was shocked/electrocuted. His entire right arm tensed up all the way up to his shoulder, causing him to drop his splicing knife.",1
"While tasked with checking inventory in the warehouse, an employee was stung on the left thigh by an insect. The employee was hospitalized.",1
"An employee was using a forklift to move pallets at a warehouse. As he was backing up the forklift, his hand went outside the forklift and was crushed between the forklift and an adjacent trailer. He was hospitalized.",1
An employee was attempting to unclog a heat shrink machine when the machine's blade amputated the employee's right middle fingertip.,0
An employee suffered a twisted leg while delivering mail.,1
"An employee was removing dough and attempting to clear a photo eye on a dough-dividing machine that was malfunctioning when the employee's right hand was caught in a shear point, resulting in the amputation of three fingers.",1
"An employee was trying to restart a conveyor belt that would not run. The employee was checking the tension on the motor belt when the auger motor started running, causing an amputation of his left thumb above the first joint.",1
An employee was pushing a container to the end of a flatbed truck's bed. A forklift pushed a container while it was lifting another container from the truck's bed. The employee's right ankle got caught between two containers on the flatbed and was fractured.,1
"An employee was on the roof checking an air handling unit when the pulley grabbed the employee's glove and pulled in the left hand, cutting the left ring finger just below the nailbed and resulting in an amputation.",0
An employee was working to free a trailer's roll-up door that was stuck. He grabbed a panel on the door and applied force in the opposite direction. The panel came free from the track and the momentum caused the employee to fall down onto his right side resulting in a fractured leg.,1
An employee was checking a dust collection system when his hand was caught in a rotary blade. Four fingers were amputated.,1
An employee was taking measurements when an access door shut on their finger amputating the right middle fingertip.,0
"An employee was assigned to clean all the work areas. While climbing down a fixed ladder, the employee's right index finger got caught on the grill steel surface. She lost her balance and fell approximately 10-12 feet to the ground, resulting in a partial amputation of the right index finger.",0
"While removing the roof of a mobile home, an employee fell approximately 10 feet from the roof to the ground. The employee was hospitalized for a strained lower back.",1
"After operating a paver screed, an employee became ill and was hospitalized for heat exhaustion.",1
"An employee was operating a forklift when the forklift blade became caught on a piece of metal over the expansion joint on a dock surface, causing the forklift to abruptly stop. The employee was buckled but his head impacted the forklift's front guard. He was hospitalized with a head injury.",1
"An employee was carrying a bucket of water. The bucket fell to the floor; then the employee fell, suffering second- and third-degree burns to the arm and stomach from the water.",1
"An employee was closing a cardboard baler with his left hand. He pulled down the door and continued to hang onto the handle of the cardboard baler with his left hand as it closed. He reached with his right hand to start the baler. As he did this, his left pinky and ring fingers were caught in the baler, which started to pull his fingers in. His fingers were then caught on the safety mechanism.",0
"An employee drove a car into the shop that had been treated with an anti-odor, anti-mold chemical. The employee was hospitalized for chest pain and symptoms of an allergic reaction to the chemical.",1
An employee was sanding a pole sander from the top of a 6-foot stepladder when he lost his balance and fell to the floor. The employee suffered broken bones.,1
An employee was cutting a laminated board with a table saw. The sawblade amputated the employee's right thumb and ring finger and lacerated the index and middle fingers.,1
An employee was walking when he tripped and fell to the floor fracturing his right tibia.,1
"An employee was cleaning a fryer when the employee's hand slipped and hot oil splashed the employee's chest, face, left shoulder, and left hand/arm.",1
"An employee was struck by a forklift that was backing out of a trailer on a warehouse dock, suffering a broken right leg.",1
"An employee had been operating a gasoline powered water pump. When the water pump ran out of gasoline, the employee went to add gasoline and the gasoline fumes ignited. The employee was burned on the left hand, left arm, and left leg.",1
An employee had been performing maintenance on an air compressor. The employee was testing the voltage on the motor control panel when an arc flash occurred. The employee was treated for second and third degree burns to the arm and both hands.,1
"An employee was using a circular saw to cut wood when the saw partially severed his right-hand index, middle, and ring fingers.",1
"While sandblasting, an employee lost his grip on the sand blasting nozzle. The nozzle recoiled back at the employee's leg and blast grit embedded into the skin on his leg. The employee was hospitalized.",1
An employee was hand wrapping a skid to repair a section that was torn. The employee was walking counter-clockwise around the skid when the wrapping broke and he lost balance. The employee fell and sustained a fractured right femur.,1
"At about 11:15 a.m. on June 10, 2020, an employee was in a tree, performing utility line clearing. His chainsaw struck the top of his left hand, lacerating it. He was hospitalized.",1
An employee fell into a hole while walking and broke his leg.,1
"After performing work in a vault, a mechanic was climbing up a ladder when his hand slipped and he fell 8 feet to the bottom of the vault. He sustained a leg injury that required surgery.",1
"An employee was surveying for plants in a canyon. While hiking through the canyon, a rock dislodged and stuck the employee on the left ankle and foot. The employee sustained fractures to the ankle and foot.",1
An employee opened a box that contained cashews and almonds and experienced an allergic reaction to the nuts.,1
An employee was operating a stand-up lift in the warehouse when it started to slide on water that was on the floor and struck a column (rack). The employee sustained fractures to a toe on his left foot.,1
An employee was turning into the company parking lot when his tractor trailer tipped over. The employee sustained lacerations and a broken shoulder.,1
"On June 11, 2020, at 1:30 PM an employee was operating the radius bending machine. He was bending two pieces of rebar, when his glove got stuck between the two pieces and pulled his left hand into the machine's gears. The employee sustained a fingertip amputation and a fractured finger.",1
"An employee walked into her cube, tripped over her chair, and hit her eye on her chair leg. She was hospitalized with a broken left leg and a right eye injury that required surgery.",1
"An employee was assisting a forklift operator move an oxy/acetylene cutting rig. The employee's hand got caught between a fork and the lifting eye on the cutting rig, causing a fracture to the index metacarpal bone in the hand.",1
"An electric pallet jack operator was traveling down an aisle attempting to pass another stopped pallet jack, when his pallet/load got caught on another pallet in a pick location. The operator lost his balance when the equipment stopped suddenly, and his hand engaged the throttle, causing the pallet jack to move forward. His right foot had slipped off the platform and became pinned between the platform and racking. The operator was hospitalized with a fractured right foot.",1
An employee was standing at the box making machine's manual conveyor. The employee's foot got caught on the fixed leg of the conveyor. The employee's knee then buckled and she fell. The employee was hospitalized with a fractured right patella and a fractured left humerus.,1
"An employee was helping a patient get up out of bed. The patient pulled down on her to stand up, and the employee felt a sharp pain in her mid-right back. The next day, the employee experienced shortness of breath and was hospitalized for a back strain and collapsed lung.",1
"An employee was connecting an airline from a tractor trailer when he slipped and fell to the ground, resulting in a broken hip.",1
"An employee was stepping out of the back of his parts truck, using the grab bar. He stepped down onto the bumper of another truck that was parked right next to his truck. His boot got stuck and he slipped and twisted his leg. The employee sustained a fractured left tibia.",1
A driver exited the truck in front of a fuel island. The truck proceeded to roll and pinned the driver against the fuel island. The driver sustained a fractured foot and pelvis.,1
"An employee was adjusting the guardrail of an elevated lift platform. The employee was pushing the guardrail up while another employee, who was standing on the lift, was pushing down on the guardrail. The injured employee got his right middle finger caught in a pinch point on the guardrail and sustained a fingertip amputation.",0
An employee working in a meat cooler opened the cooler door to exit when his finger was caught between the door handle and the wall on the cooler. The employee's middle finger on his left hand was amputated.,0
"On June 11, 2020, at 7:30 a.m., an employee was diagnosing why a breaker kept tripping on a dust extraction system at a grain dryer facility. As the employee was cleaning out the dust near the airlocks, the system started. The fan blades then amputated all four of his fingers on his right hand.",1
"An employee was unloading a super sack that was hoisted by a forklift into a hopper when the loops that hold the super sack up broke, causing the sack to fall onto the employee. The employee suffered a broken leg requiring surgery.",1
"An employee was descending a light pole and stepped onto an A-frame ladder in the closed position. The ladder gave way and the employee fell approximately 8 feet to the ground level, suffering right hip and right rib injuries.",1
"An employee was walking from the maintenance shop to the warehouse area. He was struck in the back by a sit-down forklift that was carrying two stacks of oriented strand board (OSB) that had been recently heat-treated. Each stack weighed approximately 3,500 pounds and had a temperature of approximately 250 degrees Fahrenheit. The employee sustained burn injuries to his lower back and buttocks, a puncture wound to his right forearm, and contusions to his ribs.",1
"An employee was operating a forklift to unload a truck when the truck moved, causing the employee to fall to the ground and suffer a spinal injury.",1
"An employee was working from the ceiling joists while installing ductwork on a single-family residential house under new construction when one of the joists broke apart, causing him to fall approximately 23 feet to the concrete floor below. He fractured both wrists and his left elbow.",1
"An employee was removing a lug on a cylinder mount. He fell from the railing, outside the shredder, approximately 12 feet onto concrete and scrap metal. The employee was unconscious and sustained internal bleeding and head injuries.",1
"An employee collapsed while moving merchandize and experienced shortness of breath, facial tingling, and numbness in his face and hand. He was hospitalized due to dehydration.",1
An employee was preparing to close the roll-up door on the back of a package delivery truck. He stepped backwards to place his foot on the lift gate and fell approximately 5 feet to the ground. The employee was hospitalized with a dislocated and fractured elbow that required surgery.,1
"An employee was conducting an emissions test of a nitrogen vaporizer unit inside an instrument test trailer when a pipe explosion occurred outside. Pieces of the steel pipe scattered in all directions, including toward the trailer. As a result, the employee suffered a fractured right radius bone, requiring hospitalization and surgery.",1
"An employee was installing a new elevator, working from a false elevator car in the shaft. A railing on the false car fell apart and the employee fell through it, landing 23 feet below in the pit of the elevator shaft. The employee suffered a broken foot, dislocated shoulder, and broken pelvis.",1
An employee was going onto a roof to retrieve a tool when the employee fell from the roof to scaffolding and then to a catwalk. The employee suffered broken ribs.,1
"An employee was attempting to remove the lid from a plastic container by applying heat with a torch to loosen the top. The liquid inside the container heated up and the container burst open under pressure, spraying the employee who suffered first and second degree burns to the front of his body.",1
"An employee was applying edge protectors on top of a load of drywall on a flatbed truck. He fell to the ground, suffering broken vertebrae and bleeding under the skin.",1
An employee was operating a scissor lift using the remote control box. The employee was struck by the lift and his foot was broken. He was hospitalized.,1
An employee was cleaning out scrap from a 100-ton press. The machine started and amputated four fingers of his left hand at the first knuckle.,0
"An employee was using an industrial lifting magnet to pick up a steel plate when the magnet dropped the steel plate. The employee had his left ring finger on the table when the plate dropped, smashing the fingertip, which had to be amputated.",0
"An employee was cleaning a room with a mop. The employee stepped backward and their foot became entangled in the mop. The employee tripped and fell backward to the floor, resulting in a back injury and a hip contusion.",1
"An employee was working while a running forklift was parked nearby. The forklift began to roll and struck the employee, resulting in hospitalization for a broken leg.",1
"An employee was working inside a manhole, trying to connect an air gun to the an compressor. Air pressure built up; the air gun popped off and hit him between his elbow and wrist on his left arm. He developed cellulitis and was hospitalized.",1
A carpenter was stripping column forms when his right middle fingertip was pinched between the brackets on the hinge side. The fingernail and skin on the fingertip were removed and the bone was fractured.,1
An employee was attempting to remove a plastic label from a plastic blow molding machine when the machine amputated the employee's right index fingertip.,0
"While exiting from a truck, an employee stepped into a pot hole and fell, fracturing her right hip.",1
"An employee was on a ladder using a chainsaw to trim trees above a residential home. The employee lost his footing on the ladder, causing the chainsaw to slip and lacerate his right forearm.",1
"A temporary employee was operating a shear to cut rebar. The employee was removing two pieces of rebar from the gauge table when his finger was pinched between a piece of rebar, the prybar he was using, and the gauge table. This resulted in surgical amputation of the right middle fingertip, just below the fingernail.",0
An employee was supervising the clearing of a floor drain when he slipped on wet cheese powder. He fell on the floor and broke his left hip.,1
"An employee was stocking chemicals on shelves and fell off a step ladder, hitting his head. The employee was hospitalized with a head injury.",1
An employee was helping to move a hay trailer on a dolly. The hay trailer fell off the dolly and struck the employee between the knee and upper part of the leg resulting in hospitalization with a possible fracture.,1
"While placing a piece of nonwoven geotextile along the shoreline bank, a bucket excavator struck an employee resulting in a broken pelvis and fractured ribs requiring hospitalization.",1
An employee flagging traffic was hit by a vehicle's passenger side fender and side mirror. The employee sustained contusions.,1
An employee was disconnecting an attachment on a skid steer when the arms dropped a little and caught him on the hip against the machine. The employee sustained a broken pelvis.,1
"An employee was offloading sliding glass doors. After removing a strap, the employee was walking away and the doors fell on him. The employee was hospitalized with a cervical fracture.",1
An employee was standing near a shaft while it was being moved with an overhead crane. The shaft bumped into another shaft which hit the employee's foot. His right foot was fractured.,1
An employee tripped and fell while walking and sustained a fractured elbow.,1
"An employee was picking up construction debris behind a skid steer when the skid steer backed into him and ran over his foot, breaking two bones in his right ankle. He was hospitalized and had surgery.",1
A maintenance employee was attempting to clear a jam on a conveyor. The employee's hand was between the conveyor bars when the equipment moved and cut the employee's hand. The employee was hospitalized and required surgery.,1
An employee was troubleshooting a press. The employee had used a ladder to reach a portion of the press when the press activated and caused a partial amputation to his left middle fingertip.,0
An employee standing on a scaffold was helping to guide a load onto the roof. The back of his left hand was cut when it contacted the edge of the building's tin roof.,1
Two employees were operating high reach stand-up forklifts. Employee 1 was traveling north along an aisle in a room while employee 2 was putting away a pallet in the same aisle. Employee 1 jumped out of his forklift and was crushed between his forklift and employee 2's forklift. Employee 1 was hospitalized with a pelvic fracture.,1
"An employee was injured when another employee driving a pickup truck backed into him, pinning him between the truck and heavy equipment. He was hospitalized with a puncture laceration to the right buttocks.",1
"While lifting a case of drinks, an employee suffered damage to a pre-existing hernia. The employee was hospitalized.",1
"An employee was handling a ladder on a sales floor when his left little finger got caught in the rungs. As the ladder tipped over, the finger was amputated at the knuckle.",0
"An employee entered a patient's room, tripped over the patient's shoes, and fell on her right knee. The knee was fractured.",1
"On June 13, 2020, an employee was conducting touch-up paint work on traffic arrows on the asphalt parking lot. The employee had set up cones around the work area. The employee was struck by a customer's vehicle resulting in crushing injuries to the lower left leg.",1
"A driver was pulling a pallet of dry product onto the liftgate of a delivery truck using a manual pallet jack. The weight of the pallet pushed him back against the chain on the liftgate causing him to lose balance and fall backward. His right leg was pinned between the pallet, the manual jack, and the chain. The driver was holding onto the chain while hanging from the gate and was able to pull his leg free. The driver was hospitalized with a broken right lower leg.",1
"An employee was torch cutting springs on a boiler. When the spring being worked on would not come off, the employee went to remove it by hand, and the spring struck his hand. The employee sustained a palm laceration and a fractured right middle finger.",1
An employee was driving a forklift down an enclosed corridor when the forklift struck a steel rack.  The employee's left foot was crushed between the forklift and the steel rack.,1
An employee was traveling through an aisle on a forklift when it skidded on a powder substance that was on the floor and struck a storage rack. The employee's left ankle was broken in five places.,1
An employee was riding a motorcycle on a trail when the front tire hit a rock and the employee was thrown from the motorcycle. The employee sustained a broken leg and a broken wrist.,1
"An employee fell from a metal roof that was being removed and replaced. The employee landed on a concrete floor about 22 feet below, suffering skull and neck fractures.",1
An employee was performing an audit of the cash in the safe when their right thumb was caught and amputated by the safe door as it was closing.,0
An employee was trying to reach for a document when he fell to the ground and broke his leg.,1
An employee was on a rig floor walkway removing a wireline top tree flange when the walkway collapsed to the ground. The employee suffered a broken leg and a head laceration.,1
An employee was cleaning a discharge auger at the bag house when his right middle and ring fingers were caught and amputated in the rotating auger.,0
"An employee was cutting metal when his left ring finger was caught under a metal clamp. Once he pressed the pedal to actuate the cutter, his finger was crushed from the nail to the fingertip causing it to be amputated.",1
An employee operating a reach truck struck a bollard pole and sustained a left lower leg fracture.,1
A cashier was checking out and assisting a customer when she tripped over a flat cart and fell to the floor. She sustained a broken right femur and was hospitalized.,1
"An employee was moving plastic tote containers when he fell to the surface. He was hospitalized, suffering from neck, back, leg, and arm pain.",1
"On June 13, 2020, an employee fell down the stairs at his house and fractured his foot. The next day, he went to work and was pulling a parts cart up a ramp when he felt his foot pop. He was hospitalized, and his foot had to be amputated.",1
"On June 15, 2020, an employee was operating a punch press when his left hand entered the die area of the press. The foot pedal was then pressed, causing the machine to cycle and crush the employee's left palm and four fingers. As a result, the employee's left index finger was partially amputated.",1
"An employee was assisting a resident when she got caught and tripped on the patient’s bedding and fell to the floor, breaking her tibia and fibula. The employee required surgery.",1
"An employee was cleaning glue from the roller of a glue machine when the employee's hand was caught in the roller, resulting in torn ligaments. The machine was not locked out at the time of the incident.",1
"An employee was operating a roller machine to seal coat on asphalt when the employee swerved to avoid a dog and the roller machine rolled down a hillside. As a result, the employee sustained four fractured ribs and a burned right leg, requiring hospitalization.",1
"An employee was pulling wire through a cabinet using a chugger when the cabinet tipped over onto the employee, who suffered two fractured ribs and three fractured vertebrae.",1
An employee was using his right arm to release a package jam. He suffered an overextension-related injury to the right shoulder.,1
"An employee had just checked a vehicle's exhaust from a lift. As the employee moved from the lift to a stool, he fell about 4 feet to the floor and suffered a collapsed lung. He was hospitalized.",1
"At about 2:30 p.m. on June 15, 2020, a temporary employee was drilling holes in the outside wall of a house (to install shutters) when he became lightheaded due to heat exhaustion and dehydration. He was hospitalized.",1
"An employee was tightening straps on a 3,000-pound wire ram. Straps on the opposite side became loose and the ram began to dig into the ground, then fell and pinned the employee to the ground. The employee suffered a lower lumbar compression.",1
"An employee was doing caulking work from a scaffold when he fell. He landed on the ground about 8 feet below, suffering a dislocated shoulder and broken femur.",1
"An employee was climbing a ladder out of a chip pit. When he reached the top, he fell straight down about 10 feet to the concrete floor, breaking both his heel bones.",1
An employee developed heat-related dizziness and a headache while finishing a collection route.,1
"On 6/15/20, an employee began cramping and became ill due to possible heat exhaustion. The employee was hospitalized.",1
An off-center fan belt was turned and pulled an employee's left hand between the pulley and the belt. The employee's middle fingertip was amputated.,0
"An employee was painting the exterior of a home from a 12-foot ladder. The employee fell from the ladder and landed on a patio, suffering multiple broken ribs and a large gash on the head. He was hospitalized.",1
"A truck driver was moving the seal of a leaking pump. His right index finger got stuck in a valve, which amputated the fingertip.",0
"An employee arrived at the shop to pick up parts. He used a lift jack to move crates, uncrated a crate, took the parts out and set them on the side. There was a heavy metal pole that is used for the lift jacks that fell off the shelf and hit his hand. He sustained the amputation of the left middle fingertip.",0
An employee was holding down the hose pump to transfer chemicals from the dip tank to a tote. The employee was exposed via inhalation to phosphoric acid resulting in chemical burns to the lung.,1
"An employee was working the hand brake to stop a railcar. The hand brake jammed causing the railcar to bump into a shop truck that was on the same line. The employee's right hand got caught between the railcar and the shop truck, causing the amputation of the index finger, middle finger, and thumb.",0
"An employee was machining a component on a horizontal boring mill when the employee's glove was caught in the rotating boring instrument, resulting in the amputation of the employee's right hand thumb.",0
"An employee was using a portable ladder to access the second level of the roof from the first level. The bottom of the ladder slid out, causing the employee to fall to the first level. He suffered fractured vertebrae.",1
"Two employees were pushing a cart that was fully loaded with drywall sheets (weighting about 600 pounds) when the cart's wheel fell into a hole in the ground. The cart tilted and the drywall sheets fell onto one employee, pushing him backward. He landed on top of another drywall stack and sustained a back injury.",1
An employee was performing maintenance on a fuse box when the fuse box caught on fire. The employee sustained burns to his arms and was hospitalized.,1
"On June 15, 2020, at approximately 8:00 AM, an employee (temporary employee contracted to site) was reaching over a turkey gizzard processing machine when her gloved hand became trapped in the machine. The employee sustained a fractured thumb and was hospitalized.",1
"A crew blew a tire on the highway. They decided to change the tire. After changing the tire, they were placing the damaged tire back on the trailer when the tire slipped and pinched the injured employee's right pinky finger, amputating the top inch.",0
An employee was turning off a valve with a wrench when he developed a hernia. He was hospitalized.,1
"While an employee was performing routine maintenance on the conveyor system, the conveyors turned on and pulled the employee's right hand through the sprocket. Four fingers on the right hand were amputated.",1
An employee was operating a front deck lawnmower when he drove into some stairs. His finger was pinned and fractured.,1
"An employee was using his right hand to clean residual dough out of a trough. The door to the trough was locked in the up position while the employee was cleaning out the excess dough. The employee bumped the trough and the door suddenly released and slid down, striking the employee's right hand and resulting in a partial amputation of the right ring finger.",0
"An employee was working in the mechanical room doing an inspection on the air handler (checking belts, bearings, pulleys, etc. for vibration). He put his left hand on the inboard bearing and was rolling the belts to rotate the shaft while feeling the bearing for abnormal vibration or noises. The belt grabbed his glove and pulled his right hand into the groove of the pulley and belt. He sustained lacerations at two fingertips on the right hand without bone loss.",1
"An employee had a mandrel in the vertical position in a vise. As the employee was opening the vise to release the mandrel, the mandrel tipped to the right, causing the employee's right hand to move to the right. During this process, the employee's right pinky finger was caught between the jaw casting and body casting of the vise, causing a partial amputation of the fingertip.",0
"Two employees were removing a door from a control room to take out a refrigerator while another employee was lying on the ground removing screws to disassemble a countertop. The door was let go and it fell over, striking the employee that was lying on the ground. The injured employee was hospitalized with a broken lower left leg and a dislocated ankle.",1
An employee was mowing a terrace lawn on a zero-turn mower when the mower got close to a hill and flipped sideways. The employee suffered a broken hip/pelvis.,1
"An employee was unloading a mail cart when the cart rolled away on the parking lot surface incline. The employee chased after the cart and fell to the parking lot surface, fracturing his right forearm. He was hospitalized and had surgery.",1
"A mini-loader was carrying flowers to a planting area. An employee was planting flowers when the bucket of the mini-loader pinned his leg to a cement structure, resulting in a left ankle fracture.",1
"An employee was changing blades in a bag machine. While reaching to orient the new blade assembly with both hands, his left-hand glove was pulled under the drive belt guard and into the drive belt resulting in amputation of the left middle and ring fingers.",1
"An employee was fixing a hydraulic hose on an industrial trash compactor. While his right hand was holding the hose that goes to the ram of the compactor, the compactor actuated. Up to 6500 PSI of hydraulic fluid shot out of a small hole in the hose and pierced a hole in the pad of the employee’s right index finger.",1
"An employee was driving a company vehicle (bucket truck). As they passed by a convenience store, they were struck in the neck by a stray bullet that may have been shot as part of a shootout that occurred at the convenience store.",1
"An employee tripped and fell to the ground while walking in the breakroom, suffering a left femoral fracture.",1
"An employee was rigging a precast panel. A metal pole brace came loose from the precast column and struck the employee on the left shoulder, causing broken left-side ribs and a possible concussion.",1
An employee was operating a standup counter-balanced forklift and was traveling toward a unit of plank siding with the forks trailing. He tried to stop the lift using the dead man pedal. His right foot was crushed between the lift and the plank siding.,1
"An employee was backing a forklift out of a trailer when the truck's roll-up door rolled down about 6 inches. He pushed it up using his hand and pressed the accelerator. His hand was then caught between the forklift cage and the truck's roll-up door, suffering fractures. He was hospitalized.",1
"An employee was standing on the top rung of an 8-foot ladder that was placed on a hill. While the employee was stretching to screw a strap to the wall, the ladder tipped over, causing the employee to fall and sustain a broken left leg below the knee.",1
"An employee was operating an asphalt fiber feeder. His glove was caught in the drive chain, which amputated three of his fingers. The drive chain was not guarded at the time.",0
"An employee was training to pack boxes on the extruding line. While reaching for a lid, the employee's left pinky finger was caught in the slat conveyor. The left pinky fingertip was amputated to the first knuckle at the hospital.",0
An employee was using a chain saw to cut into a birch tree branch at ground level when the chain saw kicked back and severely lacerated the employee's bicep. The employee was hospitalized.,1
"An employee was walking on a sidewalk when her foot went between grass and the sidewalk. She rolled her ankle and fell on her right shoulder and elbow, fracturing both.",1
"An employee was sitting down at the break table. When she went to get up from the table, her feet became twisted and she fell to the side. She was hospitalized with a bruised elbow, sprained ankle, and possible hip fractures.",1
An employee was operating a miller machine to pour a concrete mow strip in the center median of the highway. He dismounted the machine complaining of a headache due to the heat/exhaust of the machine. He started having trouble breathing and was hospitalized for heat exhaustion.,1
"An employee was working on a trim side winder line and was attempting to secure two tether brackets using a secure gun. The employee was using the secure gun while holding the bracket when the bracket spun and struck the breakaway gloves, causing them to break but still catch the employee's finger and cause a compound fracture to the finger.",1
"On June 16, 2020, at approximately 5:00 PM, an employee reached to use controls to lower a hydraulic part of a trailer. The truck was on a hill and the unmovable part of the trailer moved and pinched his forearm against a concrete beam. He was hospitalized with injury to the right forearm.",1
"An employee was elevated in the bucket of a back hoe and was using a bottle jack to straighten the body of a dump truck under repair. The bottle jack became dislodged and struck the employee in the face. The employee was propelled backwards and hit the back of their head against the bucket of the back hoe, sustaining a head injury.",1
"An employee was operating a continuous draw machine when his right hand entered the point of operation, resulting in the amputation of the two middle fingers.",1
An employee was operating a forklift to move pallets out of a slot when his left calf was pinned and fractured between the forklift and a rack. His foot was outside the forklift at the time of the incident. He was hospitalized.,1
A welder was drilling 2-inch thick steel plate with a magnetic drill. He was brushing filings away from the drill bit when his glove was caught by the drill and his hand was pulled in. The drill bit amputated his left pinky finger above the knuckle.,1
"An employee was thrown off a horse and sustained a broken clavicle, three broken ribs, and a possible punctured lung.",1
"At 9:35 AM on June 16, 2020, an employee was cutting potatoes to make French fries when the potato cutter amputated his right index fingertip.",0
An employee was standing in the basement at the project site when a mini-skid steer struck the employee from behind in the back of the leg. The employee sustained a broken ankle.,1
An employee was lifting a box that weighed no more than 25 pounds and experienced pain in the abdomen. The employee sustained a hernia requiring hospitalization and surgery.,1
"An employee was cutting a countertop with a cordless circular saw when the saw cut his finger, resulting in a 3/4-inch amputation.",0
"An employee was performing a tire exchange service. During the air up process on the rim clamp tire equipment, the tire sidewall failed/exploded, causing the rim and tire assembly to strike the employee in the left arm/wrist area. The employee was hospitalized with left arm injuries.",1
"An employee was cutting lettuce with a vegetable grip arm when the employee's left index finger contacted the slicer blade, resulting in a partial fingertip amputation.",0
An employee was using a cut-to-length slitter machine. A piece of 0.036 metal sheeting became stuck and he was attempting to dislodge it when three fingers became entangled. The fingers were broken and required surgery.,1
An employee was rolling a roll-off box to the ground when his right middle finger was caught between the box and it's rail resulting in an amputation.,0
"An employee was taking inventory of lighting fixtures in the hallway and then proceeded to come down the stairs. The employee slipped and fell down the stairs, which were wet because wax was being stripped. The employee's head struck the stairs and he sustained three broken bones in his left arm. He was hospitalized and required surgery on his arm.",1
"An employee was preparing to put a camper in a frame. He raised the jig while his hand was resting on the block. When he lowered the jig, his left thumb was caught between the I-beam and the block, resulting in a thumb tip amputation.",0
"An employee was doing maintenance work on a flipover. While bolts were being removed, the inner frame of the flipover fell and landed on the employee's foot, breaking it. The employee was hospitalized, requiring surgery.",1
An employee was using an overhead hoist to move a partial tub filled with components when his finger was caught in the hoist. The employee sustained a partial amputation to one finger.,0
"An employee was walking across the dock when he fell and tripped over a handheld pallet wrapper, breaking his right ankle.",1
"An employee was refueling a company vehicle at a fueling station when the pump spilled gas on the ground. The employee slipped on the gas and fell to the ground, sustaining a torn tendon.",1
"An employee was using a drill press to drill out a plug in a turbo housing. He wanted to change the drill bit and thought the drill press was in neutral. As he reached under the turbo housing, his right middle finger came in contact with the still-spinning drill bit, causing  a severe laceration that resulted in an amputation to the first digit.",0
While sweeping and cleaning up garbage an employee fell 10 feet through a stair hole. The employee landed on the floor and sustained a head injury.,1
An employee was working in the shop in the tire machine when the machine crushed the employee's left hand.,1
"An employee was checking the rotation of a fill machine. A sharp edge cut the employee's left middle finger, causing a partial amputation.",0
"An employee sat down on his tool box. His left middle finger was then pinched between the lid and the box, resulting in a finger amputation with bone loss.",0
"An employee was operating a stand-on commercial mower when the employee fell off the mower, suffering a laceration and broken heel.",1
"An employee was standing on the deck of a flatbed truck getting ready to un-tarp a load. When he pulled the tarp, he lost balance and fell to the ground sustaining abrasions and a sore hip.",1
An employee was using a cutting torch to remove rusted bolts off a spreader buggy when his hand slipped and the torch flame made contact with his left hand. He sustained burn injures to his left thumb and index finger.,1
A employee was grinding a metal bar on a floor grinder. The bar became caught between the work rest and grinding wheel. The employee's right middle fingertip was amputated when the bar was pulled by the grinding wheel.,0
"An employee had just finished operating a crane. While exiting the cab, the employee rolled his ankle and fell to the ground. He sustained a fractured ankle and possible tendon damage.",1
"An employee was delivering mail when a dog approached him. As he reached for his dog spray and retreated, he tripped and fell to the ground, suffering a broken wrist.",1
An employee was changing the trash bag on a shim vacuum when he attempted to check the vacuum impeller for a clog. The moving impeller blades then amputated his right ring fingertip and 1 inch from his right index fingertip. The vacuum was energized at the time of the incident.,0
An employee was performing an operational test on a muffin depositor when his right ring fingertip was amputated.,1
"An employee was operating a bottle blow molding machine when he dropped his cell phone through the front opening of the machine. He activated the machine to move forward and attempted to retrieve his cell phone. While bending over, he touched the stop button, which caused the machine to reverse into the home position. The employee then became pinned when the panel moved into the home position, injuring his left arm and upper torso on the left side.",1
"An employee was walking on a ramp to deliver a laundry cart when she took a step backwards and her foot was caught in a cart track. She fell to the ground and fractured her ankle, requiring hospitalization.",1
An employee was working at their workstation. The employee changed direction and tripped over a pallet falling to the floor and fracturing the left knee.,1
"An employee was in the process of cutting a coil of steel when the coil sprung open, catching his left leg and pinning it to the ground. He sustained a severe injury to his left ankle and was hospitalized for surgery.",1
"An employee was connecting a bucket attachment to a front loader when the employee's right index finger was caught between the locking pin and the circular hole attachment point, amputating the fingertip.",0
"On June 17, 2020, an employee was cleaning a grain chute and was caught in the chute when their neck was pinched by a grain chute lever and injured.",1
"An employee was starting the hammer mill line from the control station. Once the start button is activated a short delay occurs before the machine starts moving. The employee then ran down two flights of stairs, lifted the rubber cover on the chute for the elevator bucket, and was caught by the equipment as it started to move. The employee sustained fractures to the ulna and radius in his right forearm and the right index finger was amputated to the second knuckle.",1
An employee was using a grinder to clean a part when the grinding wheel contacted the employee's hand. The employee sustained an open fracture to his left pinky finger.,1
"An employee operating a forklift attempted to stop at a stop sign and slid into a flatbed cart, suffering a fractured leg.",1
"An employee was about to start winding the core of a hose on a reel, which requires attaching the end of the core to an air inlet on the side of the reel. The reel becomes automated once the hose core is attached and begins to spin. When she went to attach the core to the air inlet, the reel began to automatically spin. Her hand was caught between the spinning reel and a clamp that holds the pin in, resulting in a fracture to the second metacarpal bone of the left hand.",1
A coil repair technician was using a drill press when the drill press caught the glove on his left hand and pulled his hand into the press. He sustained injury to the left hand that required surgery and a partial amputation of the thumb.,1
"An employee was operating a forklift truck. His left hand was outside the cage area of forklift as he was moving parallel to a storage rack. He positioned his left hand on one of the rack beams and then slightly turned the truck with his right hand. The truck maneuvered at an angle, and the rear cage frame struck his left hand.",1
"An employee was walking to her car to put some supplies in it when she tripped over a concrete parking block and fell forward, fracturing her pelvis in two places.",1
"An employee was involved in an accident while riding an ATV, suffering an arm injury.",1
"An employee was taking a break from laying sod. When he went to get up, he fell backward and needed assistance to get up. He suffered from dehydration.",1
"An employee and other employees were transporting a 400-pound gastric bypass patient on a machine-powered bed. The bed accelerated, pinning the employee's leg between the bed and the wall. The employee was hospitalized with a broken lower right leg.",1
"An employee was operating a machine used to manufacture wire mesh when a spool on the turn table shifted. As he was attempting to adjust it, the table created a shear point and amputated his right index fingertip down to the knuckle.",0
"While installing roof decking, an employee fell approximately 12 feet from a ladder. He landed on his back and was hospitalized with a back injury.",1
An employee was chopping lettuce with a chef's knife when the blade amputated the employee's left thumb tip.,0
"An employee fell approximately 12 feet off a ladder to the floor, suffering broken ribs and a broken hip.",1
"An employee mounted a chiller section hoisted about 4 feet above the ground by a crane.  When getting back off the section, the employee fell and hit their head on the ground. The employee suffered a concussion that required hospitalization.",1
"An employee was operating a stacker machine when one of the boards became jammed. He hit the board with his hand, causing the jam to clear. The cleared board then struck his hand, smashing his right pinky finger against a metal frame just below the fingernail and resulting in a partial finger amputation.",0
"While stocking merchandise on top shelves, an employee fell from a stock cart to the floor. The employee was hospitalized with injuries to the head, arm and wrist, and required surgery for her wrist.",1
A maintenance employee was tightening a loose screw on a machine to stop it from wobbling in the drum area when the rotating drum partially amputated one of his left-hand fingers. He was hospitalized.,1
"An employee was offloading a pipe when his hand was caught between the pipe and the bollard protecting an exterior roll-up door, resulting in a right middle finger amputation.",0
"An employee was walking on a roof when he stepped into a floor hole and fell. He was hospitalized with fractures to the left leg, both wrists, and the right elbow.",1
"An employee was making deliveries on their route. During the seventh or eighth hour of their shift , the employee was hospitalized with heat stress.",1
An employee crushed his right ankle while jumping off a pump truck cabin to the ground.,1
"After working on a water tower at a height of approximately 120 feet, an employee returned to the ground and felt ill. He was hospitalized for heat exhaustion.",1
"An employee was troubleshooting an air conditioner in a customer's attic. As the employee was exiting the attic area using the customer's ladder, it slipped and the employee fell approximately 10 to 15 feet to the concrete floor. The employee sustained a concussion, blood clots in the head, and swelling of the brain.",1
An employee became lightheaded while en route to make a delivery. He was hospitalized for dehydration.,1
"An employee was moving forks on a zoom boom telehandler to fit into a manhole when the forks became stuck. As he was trying to push them over, the forks swung back and caught his right middle finger, crushing and severing the tip.",1
While moving a box on conveyor belts an employee's right hand was caught between the box and the conveyor belts. The employee sustained a muscular injury to his hand.,1
An employee was repairing a CNC router machine when the machine cycled and his head was pinched. The employee sustained a fractured skull.,1
"An employee fell off a motorized pallet jack and hit her head on the ground, suffering a concussion and requiring hospitalization.",1
"An employee was dismounting a pallet jack when the pallet jack was pulled toward him, pinning his leg against a guard post. He suffered a leg injury and fractured ankle.",1
A delivery driver fell to the ground while stepping down from his truck. He sustained a dislocated right ankle and a torn left patella tendon and was hospitalized.,1
An employee was standing on a ladder when a free standing leg support was bumped and fell over causing a laceration to the employee's right leg.,1
An employee was trimming a tree at heights when a tree branch contacted power lines. The employee was indirectly shocked and sustained burns to the right hand and both forearms.,1
An employee was utilizing a ram on a jack stand to close a structural gap when the stand kicked out and the ram struck his face. He suffered a fractured jaw and other facial fractures.,1
An employee assisting with the placement of a deck panel had his finger pinched outside the deck panel. He sustained an amputation of the left index finger.,0
"An employee was removing a screw while standing on a walk board when the walk board shifted, causing the employee to lose balance and fall 6 to 8 feet to the ground. The employee suffered lacerations to the head/face and fractures to the ribs and hand.",1
An employee was helping cut shoulders when the knife cut his hand. He sustained a laceration to the top of the right hand that involved a tendon.,1
An employee was helping to clean up around a conveyor belt area. Another employee turned the conveyor on so it could move and clear some material. The employee attempted to remove a large piece of bark under the conveyor. His left arm was caught in the moving parts under the conveyor. He was hospitalized with a broken left arm and required surgery.,1
An employee was stripping wood from a concrete roof with a hammer when a piece of metal went under his glasses and into his eye.,1
"An employee was assembling a new trailer. While cutting a Z-member channel, the material got caught forcing the band saw to work backwards. The employee sustained a right index fingertip amputation.",1
An employee experienced dizziness and cramps due to dehydration while building cranes outside.,1
An employee was riding a lawn tractor when the tractor drove into a ditch. The employee fell from the lawn tractor and three fingers on the left hand were severely lacerated.,1
"An employee was performing a pre-shift inspection of the straddle carrier truck (PIT). While climbing up the fixed ladder to the cab of the PIT, the employee fell approximately six to seven feet to the floor below. The employee sustained a fractured left heel and a possible compressed disc. The employee was hospitalized and had surgery.",1
An employee was assisting in the loading of raw milk onto a truck when the pressure within the tank equalized and the pressure relief valve shut. The employee's right index finger was caught in the valve and the fingertip was amputated.,0
An employee stopped at a metal store on his way to work. He was moving expanded metal sheets when they slipped and lacerated his arm.,1
"An employee exited his truck to assess the job site and work to be done. When he reached the edge of the area excavated for the work, the ground gave way causing him to fall into the excavation. The employee was impaled by a piece of rebar. It entered his left armpit and went through his chest muscles and up to his collar bone area.",1
"On June 19, 2020, an employee was operating a cutting tool machine when the employee's right thumb was caught and partially amputated in the machine.",1
"An employee was using an extension ladder to look above the ceiling in an airport terminal. As he was climbing the ladder, it slipped out from under him and he fell to the ground. He scraped his elbow and bumped his hip and leg. He was hospitalized and required surgery for a fractured hip.",1
An employee was attempting to remove a jammed round from an ammunition reloading mechanism he brought from home when the round discharged. Part of the ammunition casing struck his upper arm. The injury required surgical removal of the casing shrapnel from his upper arm.,1
"An employee was attempting to repair a newspaper machine when he lost his balance while standing on a roll of newspapers. He fell and fractured his ribs, requiring hospitalization.",1
"An employee was unloading a trailer using a freight stacking system when the system was released and dropped a beam. The beam landed on the employee's head, causing a fractured C2 vertebra.",1
An employee suffered a finger amputation.,0
"An employee was working off an A-frame ladder when he lost his balance and fell approximately 5 feet onto a customer's trailer hitch that was directly under him. He struck his abdomen and right arm, requiring hospitalization.",1
"An employee working on a scaffold on the opposite side of the guard rails fell 18 to 20 feet to the ground, breaking a leg and requiring hospitalization.",1
"An employee was walking across wet slippery totes that were on top of a flatbed truck when he slipped and fell approximately 20 feet to a floating concrete dock below. He suffered a broken pelvis, a broken elbow, and broken bones in his face.",1
An employee was loading a mandrel rod onto a machine when the pusher connector rod slipped off the pusher. The operator of the control panel stopped the pushing device and put it in reverse. The employee's finger was then caught and amputated in the machine.,0
An employee was riding in a UTV when the steering mechanism malfunctioned as a left turn was being made. The UTV flipped and fractured the employee's lower right leg.,1
An employee was skinning and pushing meat with their hands when the meat skinner amputated the employee's left pinky finger. A hook was not used at the time of the incident.,0
An employee was operating a CNC bender when the machine closed the tooling clamp on his left index finger. The employee sustained an amputation to the left index finger.,0
"On 06/19/2020, an employee tripped over a clothing rack and 
fell, cutting the back of her right leg when she hit the ground. The employee required a skin graft for her laceration.",1
"An employee was operating a packaging machine when a jam occurred. As the employee was clearing plastic debris, the machine cycled causing its jaws to close on the employee's left hand. The employee’s left thumb was amputated at the base of the fingernail.",0
An employee was clearing a blockage on the exhaust system at start-up while standing on the cooling bath rotor. The fins on the cooling bath roller cut through the employee's steel-toed safety shoe and amputated the right pinky toe. The machine was not guarded at the time.,0
An employee was unloading a produce truck when she was sideswiped by a pallet. She fell on the floor and landed on her left wrist. She suffered a wrist injury that required hospitalization and surgery.,1
"While closing the sliding door of the delivery truck, an employee's hand was caught in the door. The employee sustained a partial amputation and had surgery.",0
"An employee was climbing a ladder attached to a rail car, with the intention of inspecting a valve. The employee was on the fourth rung, slipped, and fell to the cement ground below. The employee was hospitalized with broken leg bones.",1
An employee was transitioning from a roof onto a ladder when he lost his footing and fell to the ground. He broke his hip and injured his neck and leg.,1
An employee was prepping an overhead crane for painting. The crane slipped off the 2-foot tall stands it was sitting on and landed on the employee. The employee was hospitalized with a fracture below the clavicle.,1
"An employee was attempting to fix a transmission issue in a box truck. He was underneath the vehicle when the transmission slipped out of gear and the vehicle rolled backwards onto him. As a result, he suffered broken ribs, scrapes to the side and buttocks, a collapsed lung, and bruises.",1
"An employee was operating a pallet jack to stock inside a freezer when his finger became stuck between a steel plate and the power jack, resulting in a right index fingertip amputation.",1
"An employee was operating an ATV at the edge of a pond that was 1 foot deep, spreading weed killer on pond weeds, when the ATV turned over and landed on his back. He suffered a C7 vertebra fracture and a bruised lung.",1
"An employee was servicing a traffic arresting barrier gate that was equipped with a retractable bollard. The bollard is moved into the up position by use of a pump and hydraulic pressure. The bollard moves into the down position by gravity as a solenoid is triggered to open a valve to relieve hydraulic pressure. When the gate is closed, the bollard is in the up position. When the gate is triggered to be opened, the bollard retracts below the road surface and then the gate slides open.  There was a removable access panel that allows access below the surface of the road to a pit where adjustments to limit switches, sensors, etc. may be made. After diagnosing the problems with the gate, the employee discovered an issue with the proximity sensor within the pit below the access panel. While adhering magnets to the surface of the bollard in line with the proximity sensor, the bollard unexpectedly descended into the frame sleeve below the road surface without the hydraulic pump activating. The employee's hands were in the pit at the time and his fingers were inside the frame sleeve. The employee's left middle and ring fingertips were amputated. The right middle fingertip was also amputated.",0
"An employee was helping to steady a light pole that was being removed when the light fixture fell from the pole and struck his head, causing a severe laceration.",1
"An employee was working to ignite a scrap wood burn pile using gasoline. When the gasoline caught fire there was a large burst of flame and the employee sustained burns to both arms, a portion of the back, their lips, and hair.",1
"An employee was removing concrete, reached down to pick up concrete, and was shocked by a cut, exposed, live electric lead. The employee suffered disorientation, arrhythmia, and headache.",1
"An employee was installing a new damper actuator on an air handler unit. He was using a cordless impact driver while working from a step ladder. While driving a self-tapping screw into a bracket, the screw bound up in the bracket causing the bracket to spin. The bracket knocked off the employee’s prescription safety glasses and struck his right eye.",1
"An employee was conducting welding and cleanup onboard a naval ship. The employee was on a straight vertical ladder, went to grab the hatch cover above, and fell approximately 4-5 feet to the deck. The employee sustained two broken bones in the right foot.",1
"While an employee was moving a trash can of product, the can fell onto the employee resulting in a broken left ankle.",1
An employee was delivering mail when a dog bit the employee's right hand. The bite became infected and required hospitalization.,1
An employee was delivering mail to a residence when a dog came through the unsecured front door and bit the employee's legs and hand.,1
"An employee was placing block dividers in-between material on a forklift's forks. The material slipped and smashed the employee's fingers against the forks, resulting in amputation.",0
An employee was removing a jam from the vertical raceway bucket scale system. The employee’s right hand slipped into the machine and the pinky finger was amputated.,0
"An employee tripped and fell over a step stool while getting product off a shelf, suffering a broken right hip.",1
An employee tripped over a chair and fell to the ground while carrying a tray and bruised a knee.,1
An employee had chest pain and difficulty breathing after pushing a wheelchair to drop off a passenger at an airport gate. The employee was hospitalized.,1
"An employee was parking his tractor trailer truck. He was found on the ground with broken ribs, a broken forearm, lacerations on the back, and a bloodshot eye. He appears to have been assaulted.",1
"An employee was moving boxes in a bakery freezer and stepped on a stack of two pallets. The employee lost balance and fell back, hitting their head and shoulder on a steel shelving unit.",1
"While walking through the facility, an employee tripped over a pallet and fell to the floor. The employee was hospitalized with a knee laceration.",1
"An employee was climbing a steel ladder. The employee felt dizzy, took a step backwards off the ladder, and sustained a fractured ankle requiring hospitalization and surgery.",1
An employee tripped over a mat and fell on the ground. She broke her femur and was hospitalized.,1
"An employee slipped and/or fell to the floor and suffered a head injury, requiring hospitalization.",1
The injured employee was showing a maintenance employee where a problem was on a piece of machinery when their right hand was crushed between the machine's frame and the transfer carriage.,1
An employee was cleaning up scraps of paper and tossing them over a wall when a slab of paper struck and fractured his left forearm.,1
An employee was loading chicks on a truck when he crushed and amputated his left middle and ring fingers.,0
An employee tripped on a water hose causing him to fall to the ground and break his hip.,1
"An employee was climbing up a two-foot step ladder to unjam the head of a turret machine. The employee missed one of the steps, fell off the ladder, and landed on the floor. He was hospitalized with a broken collar bone and a subdermal hematoma.",1
An employee was changing an AC filter from a 13 -foot A-frame ladder when a monorail crane system knocked the employee off the ladder. The employee fell to the concrete floor and sustained left arm and left knee fractures requiring hospitalization.,1
A maintenance mechanic was replacing a wheel on a machine and sustained the amputation of the right index finger.,0
"An employee was operating a gypsum pump when he lost his footing and grabbed an area to prevent him from falling. The area he grabbed contained mixing blades that were rotating. As a result, he lost the end of his left middle and ring fingers just above the fingernail.",0
"An employee was leaning against a mule train going over a rough patch in a corn field. He was trying to adjust the wing to stabilize it when the wing moved and came down, crushing his finger. As a result, his left index fingertip was amputated.",0
An employee was having a heated discussion with a customer when the customer pushed the employee to the floor. He landed on and fractured his left knee.,1
"On 06/22/2020 at about 4:30 PM, an employee was off-loading equipment after doing eight hours of landscaping duties and riding for one hour in the air conditioned truck. He started feeling ill and was hospitalized for a heart attack and dehydration.",1
An employee was clearing a jam on a conveyor when his fingers were caught by the conveyor belt. He sustained a fracture to the left thumb and a contusion to the left index finger.,1
"While closing a refuse compactor's door, a piece of cardboard started to fall out. The employee grabbed the cardboard and the compactor's door closed on his left hand, crushing two fingers.",1
"An employee was in the process of adding sulfuric acid to an acid bath when the hose he was using to pour the acid into the tank became loose and spilled the acid onto his upper legs, resulting in severe burns.  He was rushed to a quick drench shower and then hospitalized.",1
"An employee was trying to seal a punctured bag of material that was at the bottom of a stack.  The top bag of material (2,000 lb.) fell on top of the employee, who suffered three broken ribs and a possible fractured eye socket.",1
"A forklift struck an employee's foot, injuring it.",1
An employee was using a hot stamp machine. The machine actuated and partially amputated the employee's left ring finger.,0
"On June 22, 2020, at 7:20 PM, an employee was loading packages into a trailer using a loader assist machine. As he was finishing loading the trailer, the loader assist machine pushed forward into the trailer, hitting the employee in the back and pressing him into the wall. He was hospitalized with a back injury.",1
An employee was carrying a bundle of electrical cable when his legs felt weak and he fell to the ground. He suffered a herniated disc in his back that caused a pinched nerve.,1
"An employee was gathering stacked building materials at the perimeter of the job site. When the employee picked up a piece of lumber, a raccoon jumped out from underneath the pile and bit the employee's right hand. The bite pierced the employee's glove. The employee was hospitalized due to rabies.",1
"An employee was climbing a ladder between platforms on a ready-mix plant while holding a hose in one hand. The employee then slipped and fell approximately 10 feet from the ladder to the platform below, fracturing the right knee and elbow.",1
"An employee was on the back of a truck trailer, unloading pipe from the trailer. The employee fell to the ground due to environmental conditions and muddy boots. The employee sustained four fractured ribs and an L12 vertebra fracture.",1
"An employee was cleaning out a tool box on the back of a buggy. The lid to the tool box was open when the side boom was signaled to move forward. The boom struck the lid, trapping the employee between the lid and tool box. The employee suffered back and leg injuries.",1
"In the vehicle maintenance shop, an employee was attempting to access the loft (10 feet high) with a ladder. The employee fell off the ladder and fractured his skull, ribs, and thumb. The employee was hospitalized.",1
"An employee was conducting a pre-startup walkthrough, looking into inspection doors and checking for irregularities. His hand was in the process directly below a rotary feeder when the rotary feeder caught his gloved hand, resulting in a partial amputation of his left middle fingertip.",0
An employee was threading a steel cable through a stress head when it became obstructed. The employee looked in the equipment to see what the obstruction was when the tension released and the wire struck him in the eye.,1
"An employee was backing up an electric pallet jack and hit a truck cart. He dismounted the pallet jack with his hand still on the steering arm, and caused the pallet jack to run into his leg. The employee sustained a left leg fracture.",1
"An employee was retrieving shelving from the third row of warehouse racking. The employee lost their footing and fell, sustaining a fractured ankle.",1
A temporary employee was lifting a steel crane arm off the floor. The crane arm fell onto the employee's fingers. Two fingers on the left hand were partially amputated.,1
"On June 22, 2020, at 10:50 AM, an employee was installing a fuel sender in a 31-foot boat's fuel tank. As he connected the fuel sender wires, a spark was created and ignited the fuel vapors. The vapors exploded and then caught on fire, burning the employee. He jumped down from the boat and other employees ran over to put out the fire. He was hospitalized with third degree burns on his hands and a concussion.",1
"An employee was packaging finished parts when she turned to step off a mat and her inner left foot caught the edge of the mat. Her left ankle rolled and she fell on her right side, fracturing her right fibula and multiple bones in her lower right leg.",1
"An employee was struck by a forklift, suffering a broken left leg. The employee was hospitalized.",1
An employee was working on site when a powered industrial truck driver ran over and fractured the employee's foot. The employee was hospitalized.,1
An employee sustained an amputation of the right ring finger when a 500-pound steel plate fell from a jib crane and landed on the employee's finger.,0
"An employee was inspecting a conveyor system, looking for the source of a noise, when their left arm was caught in the conveyor. The employee was hospitalized with wrist and elbow lacerations, requiring surgery.",1
"An employee was on a forklift's forks, which had been raised so he could unwrap a tarpaulin. As he unwrapped the tarp, he was dragged off the forks and fell to the ground, injuring his head on the concrete driveway.",1
"An employee was throwing metal into the hopper when his finger was caught between metal and the hopper, resulting in a finger amputation.",0
"An employee was moving stacked doors when the doors shifted and fell on top of him, fracturing his back.",1
"While exiting a refrigerator, an employee's hand was caught and degloved by the closing door.",1
An employee was stocking shelves and turned to grab another box when his leg gave out and he fell to the ground resulting in a fractured hip.,1
"A skid steer backed into an employee, pinning him against a barrier. He suffered a pinched artery and was hospitalized.",1
"Two employees were accessing a water tower. They climbed a ladder to access a walkway. One of the employees fell from the walkway to the ground, a distance of 23 feet. The employee suffered multiple fractures including a fractured pelvis, upper arm and two ribs.",1
A tire technician was changing the tires on a forklift when their left hand was caught between the turning table and the tires. The technician's left hand sustained four broken fingers and two torn tendons.,1
A temporary employee was observing two employees using a hydraulic torque wrench. When the machine was in cycle the temporary employee's hand became caught and a fingertip was amputated.,1
An employee had been operating a utility vehicle. He was found unresponsive in a field and was hospitalized with a head contusion and possible brain bleed.,1
An employee was edging and trimming when he began to feel ill and had cramps in his arms. Later that day he was hospitalized for renal failure due to dehydration.,1
An employee was using a forklift to move a metal frame divider/welding blind. The employee had partially lifted the divider (blind) and then exited the forklift to push over the divider onto its side. The blind slid on the forks and tipped upwards causing one of the support legs on the blind stand to contact the employee's left ribs. He sustained fractured ribs and a hemothorax.,1
"An employee set a ladder on top of the pedestal of a memorial to hang poly over a window. When he accessed the ladder, the platform moved and caused him to fall. His right pinky finger was caught in the framing of the window and amputated.",0
An employee who had been engaged in driver training with a supervisor was hospitalized with dehydration.,1
An employee received an electrical shock while changing fuses on a portable trailer.,1
An employee was hospitalized due to a heat-related injury.,1
An employee was wiping crumbs off the belt and the edge of a conveyor when their fingers were caught between the chain and sprocket at the bagel slicer. The employee sustained the amputation of four fingertips on the left hand.,1
"An employee was using a sleever bar to separate a steel bar joist from a bundle that contained five steel bar joists. The nearest steel bar joist fell on the employee and rolled on the front of the employee's abdomen. The steel bar joist weighs approximately 1,500 pounds. The employee was hospitalized.",1
"An employee experienced shortness of breath and dehydration while restocking shelves in a warehouse, requiring hospitalization.",1
An employee was operating an ATV while inspecting vegetation in a utility right of way. The ATV was traversing a hill when the left front tire dropped off into a washout area. The ATV rolled over and landed on top of the employee. The ATV remained running as the employee worked to free himself. The hot muffler was just above the employee's back while he was under the ATV and caused third degree burns on the right side of his back.,1
An employee was cutting concrete decking with a demo saw when the demo saw kicked back and cut his neck.,1
"An employee was attempting to move a 96"" X 4"" X 7"" C channel by hand on his fixture table. As he began to pull the C channel across his fixture table, his right thumb was pinched between a square hole in the fixture table and the C channel, resulting in a partial soft tissue amputation without bone loss of the fingerprint side of his right thumb.",0
An employee was operating a radial edge miter saw when his hand was caught in the blade and a finger was amputated.,1
"An employee was on the production floor cleaning a machine with a metal rod. The metal rod got caught and was pulled by the gear of the machine causing the handle of the rod to press the employee's fingers against the edge of the area being cleaned. The employee's index, middle, and ring fingers were amputated.",1
An employee was working on a breaker isolation switch of unknown voltage. The employee received an electrical shock from the switch and was hospitalized.,1
"A temporary employee was cleaning excess oil from around the air operator machine (punches a hole in material). When the employee inadvertently contacted a button located below the table, the air cylinder moved down and caught the employee's left middle fingertip between the vertical guides, resulting in fracture and partial amputation. The machine was not guarded.",0
"An employee fell from a ladder to the concrete floor while performing maintenance work, suffering a head injury.",1
An employee was ripping a 2x4 for a keyway using a portable circular saw when the saw amputated his right pinky finger.,0
A Presbyterian Night Shelter employee was hit by the trash truck he was working on. He suffered a left foot fracture that required surgery.,1
"An employee was spotting for a forklift operator moving rebar to reinforce steel. The load became stuck on the ground, causing it to fall off the forks of the forklift and onto the employee's right leg. The employee suffered a fractured ankle, requiring surgery and hospitalization.",1
An employee fell while walking into her office. She landed on the ground and suffered a broken hip.,1
A Waste Management driver was backing a waste truck in a cul-de-sac when the truck struck another helper employee. The injured employee sustained a fractured left foot.,1
"An employee installing a metal roof deck fell through an opening in the roof approximately 26 feet to the concrete ground. The employee sustained fractures to the left leg, left arm, pelvis, and cheek bone.",1
"An employee was transferring flammable liquid in the lab from a 5-gallon container to a 1-gallon container when the liquid ignited, resulting in burns to the employee's hands, knee, and left forearm.",1
"An employee fell from a 5-rung step ladder while removing Christmas decorations, suffering a broken femur.",1
"An employee was operating a narrow-aisle standup powered industrial truck (PIT) in the manufacturing warehouse. When he attempted to slow down, the lift started to slide due to the damp floor from the rain. His left foot became pinched between the PIT and a steel bollard. He sustained an open displaced fracture with a laceration of the left big toe.",1
"A maintenance employee was using a ladder to perform utility activities in a ceiling. Upon descending the ladder, the employee slipped on the last rung and landed horizontally on his left hip, sustaining a fractured pelvis.",1
A driver had just gotten a skid off the truck while delivering cargo to a customer when he came into contact with a mower blade that was sticking out of the cardboard container that it was in. The driver sustained a cut to the Achilles tendon on his right ankle that required hospitalization and surgery.,1
"An employee fell approximately 15 feet off a roof hatch to the floor, suffering brain injuries.",1
"An employee was standing to the left of a chair with his right foot on the chair leg when he lost his balance and fell to the floor. As a result of striking the floor, the employee broke his left foot.",1
An employee was moving a stone slab from an A frame when the stone slab fell on the employee. The employee sustained a broken leg.,1
"Employees were moving a large window through a door of an apartment. The window had to be tilted so it could pass through the door, and its rail plastic safety block fell off. The windowpane slid and caught the right middle finger of one employee (working for Juarez Glass) against the frame. The last joint of the finger was amputated.",0
"An employee was removing an open-head drum from a skid. When he removed it, he rolled it on the floor. His finger got caught between the drum he was moving and another drum that was stationary. The employee's right ring finger was amputated between the two drums.",0
"An employee was walking down the service road to clock-in for their shift. When the employee went to step onto the grass, they lost their footing and stepped back into a pothole and fell. The employee was hospitalized with a fractured left fibula and an open fracture of the left ankle.",1
"While walking through the parking lot, an employee tripped and fell and stumbled into a brick wall. The employee was hospitalized with a hematoma to the right eye, a contusion to the right shoulder, and a fractured right femur.",1
An employee had been outside pushing dirt using a broom. He was hospitalized with dehydration.,1
"An employee was forming a part on a roller when his right glove became caught and his hand was pulled into the roller. His right index and middle fingers were crushed, resulting in a fracture and amputation of the distal fingertip.",0
"A temporary employee was removing a part that she had just fabricated from the rolling machine. She stepped on the foot pedal while her hand was near the roller, which snagged her glove and pulled two fingertips into the roller. Her right middle and index fingertips were crushed.",1
"An employee was weighing cans and placing gallon-sized cans on a small cart. While pulling the cart, the cart caught the employee's foot, causing the employee to trip and fall on the floor. The cart and three cans fell on her. She was hospitalized with a fractured wrist and hip.",1
An employee was using a rag to clean ink blots from the rollers of a flexo press. The rag became caught in the rollers and pulled the employee's left hand into the machine's rollers. The employee sustained amputation of the left index and middle fingertips.,0
"An employee was assisting in attaching a bucket, with a large pin, to an excavator. The pin was dropped and it crushed the injured employee's hand against the bucket. The employee sustained the amputation of the ring finger and was hospitalized with open fractures to multiple fingers of the left hand.",0
"After her shift, a driver was hospitalized due to dehydration.",1
An employee attending a company going away party had an allergic reaction to latex balloons.,1
"An employee was walking down a grassy slope. She became unsteady or slipped. At that point her right knee locked in place, her leg bent the wrong way, and she fell to the ground. The employee was hospitalized with a fractured right tibia.",1
An employee working on air conditioning vents fell through an opening to a lower level. The employee was hospitalized.,1
An employee was removing an extractor fan from the top of a manhole when he stepped forward and fell into the manhole. He sustained multiple broken bones.,1
An employee was changing the die on a molding machine when the tip of her thumb was amputated.,0
An employee fell down stairs and bruised her left knee.,1
"While unloading a truck, an employee fell to the ground from the back of the truck. The employee was hospitalized with multiple contusions.",1
An employee was performing drywall finishing work while on a scaffold. The scaffold's caster wheel fell into a floor opening causing the scaffold to tip over. The employee sustained fractured vertebrae.,1
"An employee was standing on the lower platform of a utility truck that was being driven slowly. He had picked up a construction-related temporary sign and was putting it in the back of the truck when he fell, landing on hard pavement and suffering several skull fractures and soft tissue damage to his face.",1
"A contractor employee supervised by Tennessee Valley Authority was greasing a trackhoe when the bucket of the trackhoe moved, fracturing the employee's pelvis.",1
"While closing a gate, an employee's finger was pinched in the gate's roller resulting in amputation of the left pinky fingertip.",0
An employee was pushing garbage into the waste truck when the blade of the hopper amputated his left ring fingertip.,0
A driver had been making a delivery and was walking back to the trailer. The driver tripped over a speed bump in the parking lot and fell to the ground sustaining a fractured right humerus requiring hospitalization and surgery.,1
"While moving a frame rail from left to right, an employee's finger was pinched between the frame rail bracket and a J-hook. The employee's right ring fingertip was amputated.",0
"An employee was removing cut sections of sheet metal from the laser conveyor. One of the sheets moved forward, pinning his finger against the opposite side. The employee sustained a right middle fingertip amputation.",1
"An employee was unbolting two adjoining pieces of a steel walkway/platform frame on wood blocks at the bottom of the clarifier. He reached over and around the steel member, grabbing it with his left hand. The member fell approximately 1- to 3-inches, pinning his left index finger against a wood block and fracturing it.",1
"An employee was working as a flagger on a highway project. While directing northbound traffic, he was struck by a motorist heading northbound. The employee was hospitalized.",1
"An employee was placing a steel beam that was being lowered by a hoist onto the ground. After he released the straps, the steel beam rolled and struck his calf lacerating an artery.",1
"While an employee was lowering a trailer, the landing gear on the trailer spun and struck the employee's right hand.",1
An employee suffered a finger amputation.,0
"An employee was about to move a cart that was blocking an automated guided vehicle from its designated stop. The cart started to move and the employee's finger against a pole, amputating the underside of the finger.",0
An employee was driving a spotting truck with a shipping container into a loading dock. The truck came into contact with a trailer in the adjoining dock; his left arm was pinched between the truck and the trailer.,1
An employee was changing the trim blade on a machine when the blade dropped on the employee's right wrist causing a laceration to the wrist that severed an artery and grazed a nerve.,1
"An employee was being tied to a buck hoist. While the elevator was descending, the counterweight amputated his left hand.",1
"Two employees were torqueing bolts on a valve. The torque machine was actuated and crushed one of the employees' fingers against the valve, causing fractures.",1
"An employee developed a headache and lightheadedness at about 2:00 p.m., then began vomiting. He went home and was hospitalized at 5:00 p.m., suffering from heat-related dehydration.",1
"An employee was helping to troubleshoot a resin conveying butterfly valve for proper operation. To perform the operation check, the employee had to support the weight of the valve to minimize the strain on the valve's wiring harness. His right thumb inadvertently entered the butterfly valve's area of actuation, and the butterfly valve smashed his right thumb diagonally across the nail, resulting in an amputation.",0
"An employee was handling poultry and laying them down on a conveyor when the employee's right second finger was caught in a moving shaft, resulting in a finger amputation.",0
An employee was using air to pressure test a tank. The tank burst and a piece of the tank struck the employee in the left shin and fractured the lower leg.,1
"An employee was operating a pallet jack. The tine of a forklift struck the employee, breaking the employee's left foot",1
"An employee was cutting a gated part on a saw when a piece of the metal part broke off and caused the abrasive saw blade to grab/pull in the part. The employee's thumb tip was also pulled into the blade, amputating the tip upon impact.",0
"An employee was in the back of his trailer, making a delivery. As he loaded his hand dolly, he slipped on some condensation and fell to the ground. He suffered contusions to the left rib and hip, as well as a ruptured spleen.",1
"At 8:07 a.m. on June 25, 2020, an employee was struck on the side of his hard hat by a piece of flying material. He suffered a skull fracture and underwent surgery.",1
"An employee was working on a grain dryer door when the door moved and pinched his right thumb, resulting in a thumb fracture and requiring hospitalization.",1
An employee was chipping on an electrical duct. An arc flash burned the employee's upper torso.,1
"An employee was doing demolition work on a brick wall. The wall fell over and crushed the employee's leg, breaking it.",1
An employee was standing on her vehicle's bumper to unload parcels when she fell to the ground resulting in a broken tibia and fibula that required surgery.,1
A mechanic was working under a vehicle that had been raised on jacks. The jacks were released and the vehicle came down; its tires rolled toward the employee's back and he suffered a broken pelvis.,1
An employee was filling a 125-gallon propane cylinder when the connection tube ruptured. The employee sustained a concussion.,1
"On June 25, 2020, an employee was acting as a groundman to assist the locomotive driver in staging cars in the blast building. As the railcar was moving past a beam that is part of the building, the employee became pinned between the beam and the railcar and sustained a fractured pelvis.",1
An employee was turning a valve with a wrench when he suffered a twisted back muscle.,1
"An employee was going across a working platform when he fell to the ground 30 feet below. He suffered multiple fractures to his head, sternum, and pelvis; a broken left arm; and a broken back with three disc fractures.",1
"An employee was installing a panel and using a power planer. The employee's right hand was on the planer and their left hand was in front of the discharge when the planer blade cut the employee's left ring finger, resulting in a fingertip amputation.",1
An employee was putting cardboard into a coil on the slitter when his glove got caught by the edge of the steel and pulled his arm into the slitter. The employee's left arm was amputated above the elbow.,0
"A truck's lift gate was raised while the driver's hand was on it. The gate pinched the driver's left thumb,",1
"A Tyson Poultry commercial motor vehicle driver was struck from behind by an empty cage being carried on a three-wheel forklift. The driver suffered lacerations to the right elbow and the top of the left hand, a compound fracture to the right tibia and fibula, fractures to three lower-back vertebrae, and body abrasions.",1
"An employee was assisting a press operator. When the power press engaged, it caught the employee's fingers in the machine resulting in amputations.",0
"On June 25, 2020, an employee was using a high-pressure water lance. The rigid lance broke at a connection near the employee, and a high-pressure water stream severely lacerated the employee's arm and shoulder.",1
"An employee was working to remove an aircraft landing gear assembly. The landing gear moved and struck either the employee or the ladder that the employee was standing on, causing the employee to fall to the ground. The employee was knocked unconscious, suffering a concussion and leg bruising. He was hospitalized.",1
"An employee was on an ATV when it flipped on its side. The employee fell to the ground. His left forearm was broken in three places, and the shoulder and elbow were dislocated.",1
"Two employees were preparing to install a new die in a press. One employee was pulling the spring block off the top of the die to accommodate the shut height of the brake press. When the employee got the bolts out of the block, the die hung up on the guide pins; as the employee worked the block loose, the die freed and came down on the stop block. The other employee's right middle finger was between the stop block and the top of the die, and the fingertip was amputated.",0
"While operating a band saw machine, an employee attempted to retrieve the cut piece of metal from inside the machine. The blade had not yet come to a complete stop and lacerated his left index finger.",1
"An employee was struck on the head with a winch bar while securing a ratchet on a pipe hauling trailer, suffering a concussion and a forehead laceration that required sutures. The employee was hospitalized.",1
"An employee had just cleared a machine, jammed by a mis-cut, in poultry cut-up area. The employee was reaching to remove a second mis-cut when the circular saw started up and amputated the tips of the employee's right thumb and index finger (with no bone loss).",0
"On June 26, 2020, a steel chain on a roll-off truck trailer broke and struck an employee on the arm, causing fractured ribs, a fractured sternum, a small contusion to the right lung, a heart contusion, a broken right hand (at the metacarpal joint), and a wrist laceration.",1
"An employee was closing a trailer when the employee's right pinky finger was caught between the trailer flap, resulting in a finger amputation.",0
"An employee was setting timing on the inline section of a printing machine, which had been removed from service and was in a maintenance shop. The employee's right little finger was caught in the timing gear and amputated.",1
"A follow block fell from a jib crane and struck an employee's left hand, causing fractures. The employee was hospitalized.",1
"An employee was guiding a piece of ductwork as it was pushed into another piece. The employee's right index finger was pinched between the two pieces, causing the amputation of the fingertip.",0
An employee was waiting in the cab of his truck to deliver materials to a worksite when he was overcome by what was believed to be carbon monoxide exposure.,1
"As an employee was working in a shallow trench, the ground beneath an excavator collapsed, causing the excavator to fall into the trench and strike the employee. The employee was temporarily pinned between the excavator and a communication box installed in the trench, suffering broken ribs and back vertebrae.",1
"An employee was about to polish a work piece using a grinding tool, with a Velcro-attached polishing pad. When the tool was started, the pad separated and hit the employee's left eye.",1
A postal employee developed heat exhaustion while delivering mail. He was hospitalized.,1
"At about 4:00 a.m. on June 26, 2020, an employee was setting up a newly installed ultrasonic welder. While he was adjusting the head of the equipment on the mount relative to the welding plate, a gap was created between the head of the equipment and the welding fixture. When the computer recognized that the machine was too far out of adjustment, the welding fixture recoiled back up, closing the gap on the employee's left index finger. The finger was partially amputated.",0
"An employee was riding a zero turn mower. The wheel began to slide down an embankment. The mower turned around, did not flip, and slid down the embankment. The mower's blade cut the employee's left foot, causing fractures to the first, second, and third toes as well as severe cuts.",1
"An employee was waiting to remove the connecting pin to the rotator on a harbor crane when the remote control that was being used malfunctioned, causing the rotator to fall to one side. The rotator struck and crushed the employee's right hand.",1
"A garbage truck driver had picked up a trash bag and was walking back to his truck when a vehicle struck him, knocking him unconscious. He suffered a dislocated left shoulder and a broken bone above his right ankle. He was hospitalized.",1
"An employee was straightening material on an oven feed line. He was reaching around and under the machine to adjust the material when his fingers were caught in the nip rollers of the feeder line. He suffered three fractured right fingers, and his ring finger was degloved and partially amputated.",1
An employee suffered from heat exhaustion while supervising a lifeguard team at a water park.,1
An employee slipped on spilled hair lotion while stocking products on shelves. The employee fell to the concrete floor and suffered a broken right knee.,1
"An employee was on an order picker, pulling a tempered part from a top rack. The employee fell from the order picker at 6:45 a.m., landing about 15 feet below.",1
"On June 26, 2020, at 7:00 PM, an employee was guiding a light pole being lifted by a forklift down onto a platform. The pole then swung into the employee's hand, pinning it between the pole and the forklift. His left hand was crushed and he suffered finger amputations.",1
"A machine operator was cleaning glue from a glue spreader's rollers. Two rollers pulled in the employee's left hand, degloving the thumb. The employee was hospitalized.",1
"An employee was repairing a feed-bagging machine. A roller caught the employee's left ring finger, amputating the fingertip.",0
"An employee was dismantling a scaffold. A forklift rolled into the scaffold and the employee fell, landing on the concrete floor and suffering a head injury.",1
"An employee was operating a roller on an incline. As the roller backed down the incline, it began to roll quickly downhill, struck a parked work truck, and rolled over. The employee suffered head, arms, and upper extremity injuries.",1
"An employee lacerated his left pinky finger on a toolbox. The laceration became infected, and his pinky fingertip had to be surgically amputated on June 26, 2020.",0
"An employee was removing an air breather off of a boat motor when the engine's turbo pulled the employee's finger into the engine rotor blade, resulting in a right index fingertip amputation.",0
A pest control employee was stung by bees while trying to exterminate a beehive at a customer's house. He suffered multiple stings to the head and stomach.,1
"While climbing down an 8-foot fixed ladder, an employee slipped and fell off the ladder to the concrete floor, suffering a fractured pelvis.",1
"An employee was using a wire wheel brush on a pedestal grinder to deburr a piece of strut. The wheel caught the employee's glove and pulled in his right hand, causing a degloving injury to the middle, ring, and little fingers. He was hospitalized.",1
An employee was using an articulating front end loader to move bales of hay. The loader tipped over on its side and broke the employee's leg. The employee was hospitalized.,1
"An employee was unloading steel rods from a forklift onto a storage rack. His right hand was between the forks of the forklift while he was pulling on a rod. The large steel rod then moved and struck his right pinky finger, resulting in a fingertip amputation.",0
A driver was exposed to carbon monoxide while waiting in his truck. He became ill and was hospitalized.,1
An employee was cleaning a wall from a one-tier-high baker scaffold. The employee fell to the floor and suffered a sprained left leg.,1
"Two employees were in the bed of a customer's pickup truck, moving a grill to the back of the bed. The customer removed his ratchet straps from the truck's cab and threw them on the ground. When one of the two employees stepped down from the truck bed, his left foot landed on top of the ratchet. The employee went to the ground and the foot was broken.",1
"An employee was scanning small packages at a sorter. A nearby tugger struck a rolling bin, which in turn hit the employee's left hip and caused a contusion.",1
"An employee was removing a ladder from the first tier of a roof when he fell 10 feet from the roof, suffering back, neck, and hand injuries. He was hospitalized and had surgery.",1
"Two employees were standing next to a wall when a strong breeze caused the wall to crack. It fell onto one of the workers, covering his body in blocks. He suffered broken teeth and bones.",1
An employee was working on a flour rounder machine. When she tried to get a piece of dough out of the machine she suffered a right index finger amputation.,0
"On June 27, 2020, an employee was tying a new breaker into a busway. As he was about to hook up the ground wires, the ground wire touched one of the energized bus bars; an arc flash caused second-degree burns to the employee's neck, face, right hand, and arm.",1
"On June 27, 2020, an employee was entering a fertilizer bin through the top access when the employee fell off the bin's internally mounted ladder and struck internal structural members and the bottom of the bin. The employee was hospitalized with a fractured right arm, fractured left shoulder, fractured ribs, and cracked vertebrae.",1
"An employee was riding a bike trail after placing signage at a trail junction. The bike's rear tire washed out and the employee fell to the ground, suffering a broken left forearm. The employee was hospitalized.",1
"An employee was setting up an assembly line conveyor belt on a fill machine when her right pinky finger was caught between the chain and sprocket, resulting in a finger amputation.",0
"An employee was working on a scaffold raised to a height of approximately four feet to install can light trim and sheet rock the ceiling. As the employee exited the end of the scaffold, he mis-stepped on the rung of the ladder integrated to the scaffold. He fell backward and struck his head on the wall. His hard hat fell off and then his head struck the floor. He was hospitalized for a fractured skull and bleeding in the brain.",1
"On June 27, 2020, an employee was working from a ladder at a customer's home. The ladder slid down the cable strand and the employee fell to the ground. The employee suffered a broken leg, a chipped heel, and a broken shoulder.",1
"A utility terrain vehicle had driven off a maintenance road and had been attached to a winch. The backlashed winch line tightened when the payout control was engaged, pinching an employee's left index finger against the vehicle's bumper. The finger was lacerated and suffered nerve damage that necessitated a partial medical amputation.",1
An employee was changing a print die on a die-cutter printer. The employee's right middle and index fingers were pulled into the stationary rollers and broken.,1
"On a rig at a well site, a hydraulic line ruptured and sprayed diesel fuel onto a turbo, which caused a fire. Two rig employees hit the kill switch and jumped off of a 15-foot platform. One employee suffered a fractured ankle and was hospitalized.",1
"An employee was cutting meat. A bone jerked and the meat saw lacerated the employee's right index finger, causing a partial amputation to the fingertip.",1
"An employee lost her balance and fell backward while walking in the deli. She landed on her hands, breaking both.",1
"An employee had clocked out and left work feeling ill. After the employee arrived home and was still feeling ill, the employee was hospitalized for heat stroke.",1
"An employee fell from the third or fourth rung of a ladder to concrete below, suffering a head laceration.",1
"At 1:45 p.m. on June 29, 2020, an employee was installing plumbing at the bottom of an excavation, about 5-7 feet deep, when the side of the excavation collapsed and fell on him. He suffered fractures to the ribs, collarbone, and pelvis and was hospitalized.",1
"An employee was building a box to hold an order for shipping. The employee stapled the first half of the box and spun the box around to staple the other half, but the flap of the box got caught on the platform of the stapler. The employee was freeing the flap when the stapler activated and amputated his left middle fingertip.",1
"An employee was doing maintenance work on a raised automotive lift. The lift's automated locking mechanism failed and it dropped, trapping his hands beneath it. Both hands were severely lacerated. The employee was hospitalized.",1
"The injured employee was assisting in the backfilling of a trench after sewer line and water line repair. A co-worker was directing a waiting vehicle while the injured employee was directing the operator of an excavator that was moving out of the road. The excavator made contact with an overhead electrical line and the injured employee touched the handle on the excavator resulting in a 7400-volt electric shock. The employee was hospitalized for burns to the hand, back and feet.",1
"On 6/29/2020, at approximately 3:38 p.m., an employee was using his lanyard to lift a piece of grating when he fell through the floor opening in the mezzanine, contacting the mezzanine, grating, and/or floor while falling. He suffered lacerations to the head and neck.",1
An employee fell from a roof while cleaning gutters and was hospitalized.,1
"An employee was climbing a ladder to paint a wall. The employee fell to the ground, suffering a fracture.",1
An employee suffered respiratory problems caused by mixed bleach and an alcohol.,1
"An employee had been folding boxes and walking back to the line when she fainted and hit her head on the concrete floor, suffering an internal head injury.",1
An employee was operating a scissor lift to load a truck trailer when the dock plate gave way and the scissor lift tipped over. His foot fell between the plate and the back of the trailer and he suffered a laceration to his lower right shin area and a fractured shoulder requiring hospitalization.,1
"While delivering a new container to a customer, an employee attempted to repair the existing container that was already at the residence. The employee was holding the container up with a knuckle crane on the employee's truck and a jack from the customer when the crane slipped, dropping the container on top of the employee. The employee experienced a broken clavicle and two broken ribs, requiring hospitalization.",1
"An employee walked into a resident's room, slipped on the wet surface, and fell onto his back, hitting his head on the concrete floor.",1
"An employee tripped on coil wrapping and fell to the concrete floor, suffering a broken hip.",1
"Two employees were attempting to dislodge two steel carts that had become entangled when a cart shifted on its base, coming into contact with the injured employee's right pinky finger. As a result, the employee's right pinky fingertip was amputated.",0
An employee was loading a pallet full of beverages when a forklift struck him and pinned him between two pallets. He suffered a broken ankle and hip.,1
An employee was attempting to replace a spring in the tooling system. The employee's left hand got caught in the tooling system as it cycled resulting in injuries to the left ring and pinky fingers. The pinky finger was amputated.,1
"An employee was preparing to transfer material from a tote to a packaging line when the employee was exposed to insecticide, sustaining second degree chemical burns to the lower right leg, ankle, shin, and calf.",1
"An employee was cutting a concrete pile when a cut off section of the pile broke loose and crushed the employee's right hand, resulting in a thumb amputation.",0
An employee was moving steel in a bin. A piece shifted and severely cut his left forearm. He was hospitalized.,1
"A forklift was being used to take material off a roof. Its forks and the load became stuck in the roofing material; the forks dislodged and struck the employee in the face, causing a broken nose and a facial laceration.",1
"While trying to redirect a person's behavior, a group home employee fell to the ground and suffered a broken femur.",1
Employees were working from a non-stop scaffold. The scaffold's planks had moved; an employee was walking across the planks to correct them when he fell to the ground about 16-18 feet below. He suffered an upper back fracture and was hospitalized.,1
"An employee was operating a brake press to bend a part when the employee's right thumb was pinched, resulting in a thumb tip amputation.",0
An employee was moving a piece of angle iron in an outside assembly roller area when the angle iron tipped over and pinched his index fingertip. The fingertip was amputated.,0
"An employee was laying down trusses. The employee fell from the trusses to a concrete slab, suffering a broken skull, three broken ribs, and fractures to a cheekbone and an eye socket.",1
"On June 28, 2020, an employee was adjusting the chain tension and linkage on a packaging machine. The employee's right hand was crushed in the point of operation of the die.",1
"An employee was loading a telehandler onto a flatbed trailer. The employee stepped down 1 foot, trying to avoid mud, and stepped onto a grassy patch, then rolled his left ankle which was fractured and dislocated.",1
"An employee who had been operating a front-end loader was found trapped and crushed underneath the loader, requiring hospitalization.",1
"An employee was backing a mower into a tractor trailer when the mower's gas tank struck the trailer and exploded. The employee received burns to the face (around eyes and forehead), arms, and knees.",1
"An employee was sitting on a tower platform running a new cable to the top for a new antenna installation. A gust of wind blew the other end of the cable, causing it to swing and then strike proximal transmission lines. An arc occurred, and the current went into the employee's left arm and out his lower left side. He descended a fixed ladder with assistance and was hospitalized with electrical burns to the left arm, buttock, and thigh.",1
An employee was sanding a part after welding it. His right thumb was caught between the metal and the sanding belt and was amputated below the fingernail.,0
"After doing landscaping work all day, an employee became ill and was hospitalized for dehydration.",1
"An employee was on a 6-foot mobile scaffold, applying stucco to a corner beam. The employee fell to the ground about 4 1/2 feet below, suffering a fractured left wrist that required hospitalization.",1
"On June 30, 2020, at approximately 3:45 PM, a temporary employee picking orders in the warehouse was struck in the back of the neck by a stack of boxes that fell from stacked pallets. The employee sustained fractures to the back, ribs, and pelvis, requiring hospitalization.",1
"On June 30, 2020, an employee was installing sheathing on a low slope roof of a residential structure. The employee fell about 4 feet onto a self-supported scaffold system below the work area; a vertical scaffold post struck the employee's right armpit, causing a laceration/avulsion and severe bleeding to the armpit.",1
"An employee suffered heat-related illness while carrying letters and other mail, requiring hospitalization.",1
"After carrying mail at about 100 degrees Fahrenheit, an employee suffered heat exhaustion and was hospitalized.",1
An employee suffered a heat-related illness while repairing a gas meter outside.,1
An employee was moving a 10-gallon water container on a four-wheeled dolly. The dolly hit a bump and the container moved. The employee suffered a muscle strain in the lower back while trying to prevent the container from falling.,1
"An employee was removing a valve cap on a compressor at a compressor station. Trapped pressure caused the cap to fly off and strike the employee on the right side of his face. Glass from his safety glasses was embedded in his right eye, necessitating surgery to remove the eye.",1
"An employee was clearing shredded plastic out of a grinder. While the equipment was locked out, the employee pushed the blade to clear out more plastic and his finger became caught between the blade and edge of the grinder, resulting in a partial amputation of his left pinky finger.",0
An employee was operating a forklift to carry bricks when the metal strap that held the bricks together became caught in the forklift tire. The metal strap amputated his third right fingertip.,1
"An employee was working on a tractor's drive shaft. The tractor was positioned on an incline at the time. After working on the drive shaft, the employee moved some blocks that were used to hold the wheels in place. The brakes were not set at the time, so the tractor rolled slowly back and crushed his body between the tractor and a flatbed that was waiting outside the bay. He was hospitalized for a fractured hip.",1
An employee was setting a steel beam in a form. The employee was adjusting the beam when his left index finger was caught between the steel pipe and the chamfer. The fingertip was amputated.,0
A temporary employee was loading a piece of furniture into the hopper of a garbage truck. A glass part on the furniture broke and severely lacerated the employee's lower right leg.,1
"An employee was using a pry bar on a hot mold in a tire change press. His left pinky finger contacted the hot mold, resulting in a burn. He was hospitalized for an infection.",1
"An employee was using a square pipe to dislodge material that was jammed in the outlet gate of a machine's oil filter. The square pipe pinched his left thumb, resulting in a thumb tip amputation.",1
An employee was clearing an apparent jam from a dust collector machine. A rotary valve on the bottom of the dust collector amputated the first joint of the employee's right thumb.,1
"An employee was using a log processor to cut a log. He tried to support a cut piece of log with his hand when the weight of the log pushed his hand into the log splitter's blade, resulting in the amputation of his left hand at the wrist.",1
"An employee was rigging a piece of angle iron on a dock to an excavator bucket on a barge. The excavator was swaying due to being on the barge, causing the bucket to go up and down on the dock. The bucket came down and struck the employee on top of his foot, resulting in a partial amputation of his big toe.",0
"An employee was emptying trash containers in the back of a compactor truck when his hand was contacted by the compactor blade, resulting in a partial amputation to the distal phalanx of his left middle finger.",0
"An employee was standing on the back of a golf cart while the cart was in motion. The employee fell off the golf cart and struck his head on the pavement, suffering a head injury.",1
"An employee was standing on a 12-foot ladder, cutting a 3-inch water pipe. When he cut it, the pipe swung down and knocked the ladder out from under him. He fell to the ground about 9 feet below, landing on the ladder and suffering rib, lung, and hip damage.",1
"A maintenance employee was painting the trim inside a resident's bathroom when he lost his balance and fell, fracturing some ribs.",1
An employee was sweeping around a 3-foot by 4-foot roof opening. The employee fell through the opening to the floor about 30 feet below. The employee suffered multiple fractures to the upper body and head and was hospitalized.,1
"An employee was operating a meat packaging machine. The employee's right hand was caught between the sealing head and the sealing bucket. The employee suffered lacerations to the middle and index fingers, as well as an amputation to the ring finger.",1
"An employee was using a paint brush to touch the side of a spool that another employee was loading onto a trailer using an overhead crane when the spool (12 feet long with a 12-inch diameter) caught another spool on the trailer. This caused the other spool, to fall off the trailer and strike the employee's left foot, fracturing it.",1
"An employee was trying to clear rock from the manual tailgate of a dump truck when the tailgate fell and caught his fingers between it and the bed of the truck, resulting in the amputation of his right middle and ring fingertips.",0
A maintenance employee was injected with hydraulic fluid in the right index finger while using their hand to try to feel for a hydraulic hose leak.,1
"An employee was cutting a piece of wood with a circular saw when it bound up in the wood.  The employee pulled the saw up and it released, cutting the fingers on his left hand and resulting in an amputation of his left ring finger.",0
"On June 30, 2020, an employee was fastening straps on an empty trailer. As the employee was tightening the winch, the strap came undone and he lost his balance. He fell into the trailer, struck his head on the edge, and then fell to the ground. He suffered a head injury that required stitches, as well as a torn esophagus.",1
"An employee was removing lime from an outdoor pit by manipulating a 6"" diameter hose from a vacuum truck. The pit was estimated to be approximately 8' to 10' x 4' x 7' deep. The employee was wearing a protective garment, goggles, and a cartridge respirator. The employee sustained second degree chemical burns from the lime to the neck, abdomen, both upper both arms, both thighs, and both ankles, as well as third degree burns on one ankle.",1
"An employee stood up to reach for material at a workstation and lost balance, falling to the floor. The employee was hospitalized with a left hip fracture.",1
"At about 12:30 p.m. on June 30, 2020, an employee was adjusting the position of books on a cutting machine. The clamp cycled and came down on the employee's hand, causing a partial finger amputation.",0
An employee was actuating a valve handle at an open end pipe extension of a well tree to release gas from a natural gas storage well. The well tree rotated and the pipe extension struck the employee's head causing a skull fracture behind the right ear.,1
"An employee was using a ladder to enter a pit to remove rails and install machines. The employee stepped off the ladder approximately 1 foot from the pit floor and tripped over a pit rail, falling to the ground (the rail was not unbolted from the ground at this time and is a fixed part of the pit). The employee was hospitalized with a broken right femur.",1
"A drilling pipe was being unloaded from a flatbed trailer and being strapped to a backhoe. The flatbed trailer collapsed. The pipe rolled to the right and struck an employee in the chest, causing chest and neck injuries. The employee was hospitalized.",1
"An employee was resetting a punch press.  As the employee finished resetting the press, he tripped and his right middle finger was caught in a gear mechanism and crushed.",1
"An employee was moving a patient's walker out of a hospital aisle. The employee tripped over the walker, fell, and was injured.",1
"An employee was at a construction site, standing beside a vehicle track being carried by a forklift. The forklift lowered the track. As it hit the ground, the employee lost his balance and fell. A portion of the track slid off the forks and struck him as he tried to stand up. He suffered a broken back vertebra, a broken left eye socket, and a laceration to the back of the head.",1
An employee was consolidating aerosol cans. A can fell to the ground and shot back up striking the employee in the eye. The employee was hospitalized and underwent surgery to remove the eye.,1
"An employee working at the magnetic particle inspection clamp in the track machine line activated a hydraulic clamp and pinched their right ring finger between the side edge of the product being clamped and the clamp wall. The pinching action trapped the employee's finger and removed the soft tissue portion of the ring finger pad under the fingernail, resulting in a partial amputation.",1
An employee was using a nail gun to frame the chimney area of a house when the gun shot a nail into his right lower leg. He was hospitalized and had surgery to remove the nail.,1
"An employee was on a 4-foot stepladder, replacing a vent pipe on an oil tank outside a garage. The employee fell from the ladder. His left hip struck a steel/concrete bollard and was injured.",1
"An employee was changing out punches in a plate duplicator machine. The machine began to operate, causing fractures to the employee's tibia and fibula as well as a severe laceration.",1
"An employee was driving his personal vehicle on the property when he lost control of the vehicle, spun out 20 feet, and hit a tree. He sustained fractures to the ankle, hip, and vertebrae and lost consciousness.",1
"An employee experienced a back strain while repositioning a patient's bed, requiring hospitalization.",1
"An employee was picking up trash during a roof removal process when the employee fell through the roof and landed on the concrete approximately 20 feet below, suffering fractures.",1
"An employee was clearing jammed film on a packaging machine when the employee's right hand was caught between the die hand and die plate, fracturing the right middle and index fingers. The employee was hospitalized.",1
An employee as cleaning up debris using a concrete buggy when he inadvertently reversed the buggy into a parked vehicle and broke his leg.,1
"At 7:05 a.m. on July 1, 2020, a Waste Pro employee was gathering a pile of refuse about 40 feet from a road. A vehicle swerved to avoid the employee's garbage truck, went off the road, and struck the employee. The employee suffered multiple injuries including a broken arm and a dislocated shoulder and was hospitalized.",1
An employee was lowering a metal sign into place when the sign crushed two of the employee's fingers.,1
"On July 1, 2020, an employee was unjamming a packaging machine and sustained a partial amputation to the right index finger when the gloved finger contacted the blades inside of the machine.",0
"An employee's knee went out and the employee fell to the floor, suffering a broken left hip.",1
"An employee was checking the air pressure of a truck tire when the tire blew out, fracturing the employee's leg.",1
"An employee tripped on a path between an office area and a garage. The employee fell to the ground, suffering a herniated disk in the lower back.",1
An employee suffered a fingertip avulsion while trying to unclog a spray valve.,1
"At 7:47 a.m. on July 2, 2020, an employee was clearing leakage from a meat processing machine. The machine's moving mold plate amputated the tip of his right middle finger.",0
"An employee was cutting a weld out of a roof panel when the cutting wheel became pinched between two sections of metal. The grinder spun and kicked back toward the employee, its disk striking her in the face. She suffered a laceration across the nose and on both cheeks.",1
An employee was cutting granite with a grinder when the grinder cut the employee's right hand above the middle finger knuckle.,1
An employee was installing a 10-foot long pipe to a new separator. The pipe came loose and struck the employee's thumb against a support bracket. The thumb tip was medically amputated.,0
"On July 1, 2020, an employee was sweeping soy beans and cleaning up the flat storage facility when the employee slipped on spilled beans and fell to the concrete floor. The employee suffered a hip fracture, requiring hospitalization and surgery.",1
"An employee was lubricating a chain on an elliptical machine when his gloved finger became caught between the chain and sprocket, resulting in a fingertip amputation.",0
"An employee was on a ladder painting the exterior of a house. The ladder was set on decorative rock that shifted and caused the ladder to slip. The employee fell five feet from the ladder onto the ground and rocks, sustaining a left elbow injury that required surgery.",1
"An employee fell while descending from a step stool. The employee landed on the floor, suffering a broken hip.",1
"At about 7:40 a.m. on July 1, 2020, an employee was sweeping beans into a rotating auger. The auger amputated the employee's foot. The employee was hospitalized.",1
"On July 1, 2020, a temporary employee was slicing meat on a deli slicer when the blade caught his finger, resulting in a finger amputation.",0
"An employee was loading boxes on a conveyor when the employee's hand entered the moving parts, causing lacerations and crushing injuries.",1
"An employee was cleaning a light fixture on a loading dock. Her foot was entangled in the dock door's pull rope and she fell to the floor, suffering a broken left hip.",1
"On July 2, 2020, an employee tripped and fell while sweeping a sales floor, suffering a hip fracture.",1
An employee was delivering mail on their normal route. The employee felt ill and became disoriented. The employee was hospitalized with heat stroke.,1
"An employee was trying to repair a leaking valve on a pipeline that delivered milk product to a milk carton filling machine. A spray of steam came out of the filling machine, contacting his right hand, face, and neck. He suffered second-degree burns to the right hand and his right side.",1
"An employee finished cleaning the feeder from the extruder line and was descending a step ladder. The ladder moved unexpectedly, causing the employee to lose balance and fall. The employee's left ring finger contacted a slowly rotating agitator resulting in a broken bone and lacerated tendon.",1
"On July 2, 2020, at 2:00 p.m., an employee was unloading freight at a store when a rollatini measuring 2' x 4' fell on his leg. The rolltainer was on a lift gate and became unlevel, tipping over and striking the employee's ankle. The employee was hospitalized with a closed, non-displaced fracture of the medial malleolus of the right tibia that required surgery.",1
"An employee was working on a garage door from an A-frame ladder when a motion detector sensor was engaged, causing the door to start to come down. The door struck the employee's head, causing him to fall off the ladder and hit his head on the ground. The employee was hospitalized with injury to his head.",1
"An employee was assisting with hoisting piping by a crane. The piping struck the employee and caused the employee to fall 5 feet off a trailer to the ground. The employee suffered a partial dislocation of their left shoulder with a possible fracture, as well as L2, L3, and L4 transitional lumbar fractures.",1
An employee was working on a wind tower when he began to experience cramping. He was hospitalized for heat stress.,1
"An employee was working on an air conditioning unit in a single-family home. He was injured by an electrical shock, suffering injuries including severe burns to the face and losing consciousness.",1
An employee was checking whether a car's fan was working when the fan partially amputated his left ring and index fingers.,0
"An employee was checking repairs to a truck-mounted compressor. While he was securing the cover to the compressor fan, the fan lacerated his right thumb. He was hospitalized, undergoing surgery.",1
"On July 2, 2020, an employee was performing maintenance work on a pneumatic cylinder to remove a spacer. The cylinder amputated four of the employee's fingers. Two fingers on each hand were amputated.",0
"An employee was standing on the third rung from the bottom of an eight-foot ladder while assisting with a hanging metal door. The employee lost his balance and fell, bringing the ladder down on top of him. The employee sustained a fractured and dislocated left ankle.",1
An employee’s hand contacted a conveyor belt shaft and was drawn into the ingoing nip point. The employee sustained an amputation of the left middle fingertip.,0
An employee tripped over an electrical cord powering a pedestal fan. The employee fell to the floor and sustained a broken hip.,1
An employee was lowering the metal chute of a concrete truck when it crushed the tips of his left middle and ring fingers. The fingertips were medically amputated.,0
An employee tripped on his cane and hit his head on a cabinet.,1
An employee was utilizing crutches and fell while on the way to the presort meeting area. The employee sustained a fractured left hip.,1
"While climbing down a ladder at a water treatment plant, an employee fell into a 10-foot-deep pit, landing on the cement floor and suffering a head injury.",1
"An employee was making a delivery at a dealership when he slipped and fell, breaking his hip.",1
"A recycle tech was recycling foam material. While attempting to clear an obstruction from the conveyor, his right arm was caught in the conveyor belt resulting in a fractured forearm.",1
"An employee was installing a hydraulic cylinder onto a forklift using an overhead crane. While manually maneuvering the cylinder into place, the employee’s left thumb was pinched between the cylinder and the forklift carriage resulting an amputation up to the first knuckle.",0
"An employee was cutting lumber with a saw. The saw bucked, pulled in the lumber, and amputated the employee's hand.",1
"An employee was on a scissor lift, pulling data cable. The lift struck and injured his stomach.",1
An employee amputated their right middle finger while handling sheet metal plate.,1
"An employee was wiping down a hood filter area with a towel. The employee slipped and fell into hot water, suffering burns.",1
"As a moving cart was being lowered by a truck's lift gate, one of the four table tops it was carrying slid off. The table top struck an employee's lower left leg, breaking the fibula. The employee was hospitalized for surgery.",1
"An employee was assisting a crane operator in positioning a conservator when his left ring finger was crushed by the conservator, resulting in hospitalization.",1
"On July 2, 2020, an employee using a hydraulic bottle jack on a mobile home trailer frame suffered a crushed hand and was hospitalized.",1
An employee was cutting strip steaks with a meat saw. The saw amputated the employee's right index fingertip.,0
An employee was hospitalized for renal failure and dehydration after offloading tankers.,1
"An employee was working on a mule at an airport. A hydraulic line burst as he was pressurizing the hydraulic system, causing him to fall backwards and hit his head on the pavement.",1
An employee approached an I-beam in order to start welding on it. The I-beam had been set on the ground with an overhead crane and unhooked from the rigging before the crane traveled away. The beam then rolled and landed on the employee's right foot. The employee sustained broken bones and deep lacerations to their right foot. The employee was hospitalized for surgery and wound cleaning.,1
An employee was hospitalized due to dehydration.,1
"An employee was cleaning oil fryers. A hose broke off and sprayed hot oil onto the employee, who suffered multiple burns.",1
"An employee was handling a wheel at the inspection station. While turning the wheel over onto the table, the flange of the wheel landed on the employee's left index finger causing an avulsion to the distal phalanx that resulted in a surgical amputation.",0
An employee was sitting on a stool after working a shift. He lost consciousness and fell off the stool due to dehydration.,1
"An employee fell while cleaning the inside of a tank that had contained ethyl alcohol. The employee injured his face and knocked out two teeth, possibly aspirating one tooth.",1
"A motorized pallet jack struck an employee's foot, breaking it.",1
"On 7/3/2020, at 7:00 PM, an employee was climbing down a scaffold and was sprayed by water. This startled him and he jumped off the scaffold. He landed on his heels and fractured them.",1
An employee was found laying on the ground by a coworker. It is believed he was struck by a package. The employee sustained a concussion.,1
An employee was operating a mower on a sloped hill of a golf course. The employee sustained a head injury and broken ribs after the mower tipped over and pinned the employee to the ground.,1
An employee was removing a roller on the mast of a gantry head when it shifted and broke the employee's left forearm.,1
"A temporary employee was collecting garbage and picked up a large piece of glass. The employee attempted to turn over the glass and it shattered, lacerating his right arm. The arm was surgically amputated below the elbow.",1
"An employee fell through an opening in scaffold planking, landing on the concrete surface below and suffering a severe head laceration.",1
An employee was unjamming a wood cutting/wood splitter machine when it amputated the employee's hand.,1
An employee suffered hot water burns while making tea.,1
"An employee stepped out of a pickup truck, which began to move. The employee fell and the truck ran over the employee's right leg, causing tibia and fibula fractures that required surgery.",1
"An employee was working on a six-foot ladder fishing line through a wall when he fell to the ground and sustained a concussion, broken ribs, and a collapsed lung.",1
"An employee was using a lift truck to put product away in an aisle. After putting product away in a slot, he backed out into a stack of pallets. The top pallet went into the operator compartment, pinning his leg and breaking his tibia and fibula. When he drove forward to free his leg, he fell out of the lift onto the floor. He was hospitalized, undergoing surgery.",1
An employee suffered a fingertip amputation when their hand was caught in a machine.,0
"An employee was driving an ATV while inspecting the property. He lost control of the vehicle and ran off an embankment. The employee was hospitalized with multiple injuries, including fractured ribs.",1
"On July 3, 2020, a cabin service agent fainted. She was hospitalized on July 4, 2020, for dehydration.",1
An employee was cleaning a conveyor belt when his finger was caught between the belt and a sprocket. The fingertip was amputated.,0
An employee fell approximately 10 feet from the second elevated platform to the first elevated platform of an elevated sort tower and landed on the guard rail resulting in a fracture injury.,1
An employee was walking from the morning meeting to a turnstile. The employee fell to the ground and sustained a broken left knee.,1
An employee's right ring finger was pinched between a cart and a form tool. The employee suffered a soft tissue amputation to the fingertip.,0
A nursing assistant's foot caught on the edge of a patient's bed as she was leaving the room. The employee fell to the floor and tried to break her fall with her hands. She sustained two broken wrists.,1
"An employee slipped and fell while walking behind a café serving line. She caught a wall-mounted fire extinguisher as she fell; it fell onto her hand when she landed on the floor, amputating her left index finger at the first knuckle.",1
"An employee was working at the opening of a silo. A metal panel, propped up next to the silo, slipped and fell to the ground, striking the employee's left foot and causing two fractures and a puncture wound.",1
An employee feeding paper into a single slice doughboy machine made contact with the heated knife that cuts the paper. The employee sustained amputation of the left ring fingertip.,1
"An employee was on the second step of a step stool replacing grill hood filters when the employee fell. The employee's arm landed in a fryer containing hot cooking oil, resulting in burns on their right hand, arm, stomach, and back.",1
An employee was attempting to throw away cardboard after stocking shelves when she suffered an amputation injury to her left index finger when it was caught between two stock shelving carts.,0
"An employee became dizzy while descending a water park tower, falling down three stairs and hitting her middle back and the back of her head.",1
"An excavator bucket struck an employee in the head, causing the employee to fall off a jetty and land on a rock. The employee suffered a broken leg.",1
An employee was moving a 1-inch-diameter metal pipe onto the forks of a forklift. The employee's left hand was pinched between the pipe and the forks; the ring fingertip was crushed and amputated.,0
"On the evening of July 6, 2020, an employee was helping install a power line when his finger was caught in a chain that was being used to lift equipment. He suffered a fingertip amputation.",0
"An employee dismounted a forklift and the forklift continued to move. As he reached for the parking brake, his leg got caught in the right rear tire and was lacerated. The employee was hospitalized.",1
"A 9-foot concrete form fell on an employee's left index and middle fingers, causing avulsions to the ring and middle fingers.",1
An employee was closing the overhead door of a box truck. The tip of his left ring finger was caught in the joint between the panels and was amputated (without bone loss).,0
"An employee was performing door-to-door sales. While walking between sales visits, the employee tripped on an uneven sidewalk/driveway slab of concrete and fell to the ground, striking his left knee area and suffering bone fractures.",1
An employee was climbing down a ladder when it shifted. The employee fell and suffered a broken leg. He was hospitalized.,1
"A Goodyear employee was replacing a steer tire on a semi truck on an interstate highway. A vehicle struck the back of the Goodyear truck, which in turn struck the employee. The employee suffered multiple injuries and was hospitalized, undergoing surgery.",1
"An employee was reversing the lock out/tag out while on a pumpjack, removing the chain and binder from 
the unit. The employee slipped and fell onto an angle iron on the outer side of the concrete base. The employee sustained injuries to his right side, including his right hip and elbow, as well as transverse process fractures in two locations.",1
An employee suffered back pain while lifting a box and collapsed.,1
An employee suffered a back strain while helping to organize a warehouse.,1
An employee suffered a lacerated and bruised finger.,1
"An employee tripped on a bale of wood shavings in a chicken house, suffering a broken femur.",1
An employee fell approximately 12 feet from a garage roof after loading shingles. The fall occurred as the employee was transitioning from the roof to a conveyor used to descend the roof. The employee sustained a broken right hip and was hospitalized.,1
An employee was cleaning out pieces of dough from a machine and amputated her fingertip.,0
An employee was on a 5-foot rolling scaffold that was being moved as work progressed. The scaffold's wheel got caught causing it and the employee to fall to the concrete floor. The employee sustained head and face injuries.,1
"An employee was preparing to paint a bulk propane storage tank while on a 16' ladder. The employee fell from the ladder onto the ground and sustained a broken pelvis, hip joint, and two ribs.",1
"An employee slipped and fell to the floor while entering the restaurant, suffering a broken hip and fractured femur.",1
"An employee was preparing to remove a trailer from a dump truck. The employee had unhooked the electricity and had just removed the pin to the trailer hitch when an excavator was offloaded from the trailer. The tongue of the trailer jumped off the hitch and pinched the employee's right index finger, causing a fracture, a torn ligament, the loss of the nail, and the amputation of about 3/8 inch of the tip.",0
"Employees were clearing underbrush and trees to clear a path for a road to be built. An excavator, used to move a downed tree, struck an employee in the left leg, causing an open fracture.",1
"A construction worker was working with two other workers to remove a metal plate from a semiconductor tool base. The employee was attempting to remove inertial dampeners from the bottom of the plate while it was being suspended by a gantry. The bolt holding the plate sheared and the plate fell, fracturing the employee's arm.",1
"An employee was preparing to use a hoist to move a large, metal plate. The metal plate fell on the operator's right arm, resulting in a fracture.",1
"On July 6, 2020, a mobile equipment operator was operating an overhead crane inside a building and felt light-headed. The employee then took a 15-minute break and drank a bottle of water. After the break the employee was standing and fell to the ground breaking his left ankle. The employee was hospitalized for heat exhaustion.",1
"An employee was removing a clamp from a pipe connection. The pipe sprayed 200-degree water onto the employee, who suffered second-degree burns to the face and from the chest to the knees.",1
An employee was collecting trash in a residential neighborhood. The employee was placing a 3 x 3 foot mirror into the front-loading garbage truck when the mirror broke. The employee sustained a laceration to their left bicep.,1
An employee tripped while stepping down from an 8-inch elevated work surface. She fell and suffered a broken hip. She was hospitalized.,1
An employee was operating a trim die machine and the machine amputated 75% of the employee's left pinky finger.,1
"An employee had been using a trimming machine with a 1-inch-diameter radial blade to trim off excess leather shoe material. While he was moving a case of finished trimmed work, the blade nipped his left middle and ring fingers, causing partial amputations.",0
An employee was installing a solar panel on a second-story residential roof. The employee fell 20 feet from the roof and struck an AC unit. The employee suffered a collapsed lung and was hospitalized.,1
An employee had entered the cab of a delivery truck and was closing the slide door. The door caught the employee's left ring finger as it closed and amputated the top of the finger.,0
"A temporary employee had been loading and unloading tires into a truck trailer when he experienced cramps. He was hospitalized for severe dehydration, heat exhaustion, a kidney injury, and hypochloremia.",1
An employee was cleaning debris from an auger. The employee suffered an amputation to the left ring finger caused by pliers.,1
"Two employees were moving a 4-foot-diameter hub into position on a 1,300-pound stainless steel shaft. The rigging on the crane carrying the hub failed; the hub fell onto an employee's foot, causing two broken toes and a laceration.",1
"At the end of a 30-minute lunch break, an employee stood up from a chair, lost consciousness (due to heat exhaustion and dehydration), and fell to the floor.",1
"An city mail carrier was attacked by a dog while delivering mail. The dog bit the carrier's left shin severely; the carrier was hospitalized, requiring surgery.",1
"An employee was changing the motor and motor sheath of an HVAC unit. As the motor was rotated, his right ring finger was caught between its belt and pulley. The finger was amputated above the first knuckle.",0
"An employee was pulling material from a coil to be cut to proper size. While he was holding the material down, the shearing knife actuated and amputated the tips of his left middle and ring fingers.",0
An employee was driving a forklift toward a freezer. The forklift slid on the moist floor and collided with a stock picker in a battery charging room. The employee's left foot was caught between the two trucks and broken.,1
An employee was going up a staircase when his right foot slipped on the first step. His right shin hit the second step and suffered a hematoma.,1
"An employee was filling a chemical day tank when 5 gallons of acid overflowed onto the floor. As he was cleaning it up, the acid flowed over his shoes and burned his feet and toes.",1
"An employee was cleaning out a grinder. As the wheel was being spun, the machine's blade caught his left hand, cutting the fingers and amputating the middle fingertip.",0
"An employee was carrying a box down stairs. She fell at the last step, landing on the floor and suffering a broken ankle. She was hospitalized and underwent surgery.",1
An employee developed dehydration while removing bracing from a shoring tower.,1
An employee was on an extension ladder when it broke. The employee fell to the ground and suffered a leg injury.,1
An employee was exiting a trailer when his left knee buckled. He was hospitalized.,1
"An employee was watching as equipment was loaded onto a flatbed truck. The employee was caught between the machine carrier's two moving poles while unhooking a chain, suffering four broken ribs.",1
"On July 7, 2020, an employee was using an aerial lift to change sprinkler heads in a warehouse facility. The employee was raising the lift and was about 7-8 feet up when his back struck a ceiling beam. The beam pinned the employee against the lift control panel.  The employee suffered abdominal crushing injuries (bruise, contusion, abrasion) and was hospitalized.",1
"An employee was pulling a pallet of milk out of a walk-in cooler with a powered pallet jack. As he turned, his right little finger was caught between the pallet and the steel door frame. The fingertip was amputated.",0
"On July 7, 2020, an employee was adjusting a metal dock plate. The plate fell on the employee's right hand, causing amputations to the middle and ring fingers.",1
"An employee was stacking product off a conveyor belt onto pallets. A carton fell, and the employee's hand was caught between it and the conveyor belt. His middle finger was broken and the tip of his little finger was amputated.",1
An employee was installing a new power pole when he came into contact with live wires. He suffered electrical burns to his hands.,1
An employee was trimming the outer edge of a plastic part with a knife. The knife slipped and punctured the employee's forearm.,1
An employee was doing maintenance work on a commercial trailer's airbag system. An airbag exploded and sent metal fragments into the employee's abdomen. The employee was hospitalized.,1
"An employee was guiding the tail end of a steel strip through the guide rolls on a press. The employee's right index finger was caught between the strip and the edge guide roll, and the fingertip was amputated.",0
"An employee was mixing coloring into a distillery tank. A flash fire burned the employee's right middle, ring, and little fingers.",1
An employee was using a saw when it kicked back and struck him in the chest. He suffered a severe cut.,1
An employee was operating a press brake when it cycled and amputated four fingers on their left hand.,1
"An employee was loading a box truck. The employee fell off the lift gate, landing about 4 feet below and suffering a broken left arm.",1
"An employee was performing remodeling work at a school. The employee turned off the breaker. He was standing on an 8-foot ladder and started stripping a wire, when he was electrocuted. He sustained burns on the right index finger and left middle finger. He also fell off the ladder and sustained a fracture to the head and twisted his back.",1
An employee was riding a belted man lift when his fall protection became caught in the man lift. The employee fell approximately 8 feet and broke his lower left leg. The employee was hospitalized.,1
An employee had installed a fan in production. The employee was hospitalized for heat stroke.,1
"An employee was using a cant hook to remove a stuck cant from a cant catcher. The cant kicked back and struck the employee in the lower left leg, breaking the leg. The employee was hospitalized.",1
"An employee was placing parts onto a sawhorse with a crane. The parts started rocking; his finger was caught between them and the sawhorse, and the fingertip was amputated. He was hospitalized, undergoing surgery.",1
"An employee was standing on the ground when the wind knocked a 10-foot stepladder from the fourth-floor level. The ladder struck the employee on his hard hat, causing a fracture.",1
"An employee was delivering mail when he became ill, suffering from dizziness and vision problems. He was hospitalized.",1
"An employee was on a ladder hanging a soffit and fascia. The employee fell from the ladder and struck an object on the ground, suffering a burst fracture to a lower-back vertebra.",1
A piece of logging equipment ran up onto the legs of an employee who was near its left rear track. The employee suffered fractures to both legs that required surgery.,1
"An employee approached a brush pile to gather cut brush. A second employee was cutting limbs in the brush pile using a chainsaw. When that employee turned, the tip of the chainsaw lacerated the first employee's right arm.",1
"While applying a sealant to a home foundation, two employees were overcome by the fumes from the sealant product. One of them was hospitalized.",1
"On July 8, 2020, an employee developed heat exhaustion while performing a post inspection on a garbage truck. The employee was hospitalized.",1
"On July 8, 2020, an employee began cramping and vomiting at the end of a shift doing concrete work. He was hospitalized, suffering from heat stress.",1
"An employee was cleaning a container/tank. When the steam hose/line was removed from the container/tank, steam condensate struck the employee in the chest, neck, and face causing second degree burns.",1
"An employee was running a 50-pound bag of sugar through a bag sealer while attempting to correct a problem with the machine. His left index finger was caught in the machine's drive pulleys, and the fingertip was medically amputated. The machine was not guarded at the time of the incident.",0
"An employee was backing up a stand-up forklift when his left leg was pinned between the forklift's outer cage and a structural pole. He suffered a large laceration and contusion, with broken bones in the lower leg.",1
"After pulling cable in a ceiling and shoveling dirt onto the back of a truck, an employee developed a hernia. He was hospitalized, requiring surgery.",1
"An employee was in a warehouse, standing on a dock plate between the dock and a truck trailer. The truck pulled forward and the employee was pinched between the trailer and the dock wall. The employee suffered fractures to both legs and some internal bleeding.",1
"An employee was putting a gas-powered generator into an enclosed trailer. As he was moving a metal gas can, a flash fire began and caused burns over 40 percent of his body.",1
An employee was loading chicken in the thigh deboning machine at the shackle. As he pushed the thighs into the moving shackle his right thumb was caught in a space behind the shackle and amputated.,0
"On July 8, 2020, an employee became ill while delivering packages. The employee was hospitalized, suffering from dehydration.",1
An employee had been working on the line applying molding. The employee was hospitalized with dehydration and renal failure.,1
An employee fell 15 feet to the floor from the top of a steel rack and sustained injury to both feet and ankles.,1
An employee fell approximately 15 feet to the floor from metal racking and landed on their feet. The employee was hospitalized for feet and ankle injuries.,1
"A temporary employee was traveling to a job site. The employee's car broke down at 6:00 p.m. The employee arrived at the site at 8:00 p.m., developed symptoms of heat exhaustion at 8:15, and was hospitalized.",1
"An employee's hand was crushed in a propane cage while exchanging propane cylinders, requiring hospitalization and a finger amputation.",1
"An employee was moving a rack of 25 20-foot steel channel stacks, weighing 625 pounds, on a cart. The cart got stuck on a crack on the ground and tipped over; the channels fell onto the employee's left leg and broke it.",1
"An employee was repairing fog nozzles from a 6-foot ladder. The employee fell to the ground, breaking a wrist and the left ankle.",1
"A forklift was about to lower 800-pound steel decking, being carried on the forklift's forks. Instead the load titled forward and slid off the forks; it fell about 12 inches and hit an employee in the head and the ankle. The employee suffered fractures to the ankle, the tibia, and a back vertebra.",1
"An employee was helping a driver back up a truck. The employee was pinned between the loading dock and the truck's bumper, suffering a crushing injury.",1
"An employee was helping load a semi-trailer truck. As steel material was being placed on the truck, it amputated the employee's left middle fingertip.",0
"An employee was operating a forklift at a freight terminal dock. As the forklift backed up, it pinned the employee's right middle finger against a safety pole next to a dock door. The fingertip was amputated.",1
"An employee was on a ladder, hanging a TV on a wall. The employee fell to the floor and suffered a head injury. The employee was hospitalized.",1
"An employee was working at the front desk in an extended-stay hotel. A guest who had just received an eviction notice stabbed the employee, causing multiple injuries including a black eye and a possibly punctured lung.",1
"On July 8, 2020, an employee suffered a hiatal hernia while loading an 800-pound safe onto a truck, requiring hospitalization.",1
"An employee was moving a pallet of product with a power jack. After the pallet jack was removed from the pallet, the pallet of product became unstable and cases of product fell onto the employee, injuring one of the employee's ears.",1
An employee was doing form work when concrete/cement got into his boots. He sustained chemical burns.,1
"Three employees were bracing porcelain tile panels that weighed 2000 pounds. The panels fell and landed on one of the employees, trapping his legs. He suffered minor internal bleeding, a broken pelvis, and five fractures to the femur. He was hospitalized.",1
"Employees were erecting scaffolding inside a vessel. An employee climbed up from near the bottom to the top of the vessel (at ground level). As he was walking up a sloped duct, he lost his balance and fell, sliding about 15 feet down. He suffered a head contusion and an injury to the side.",1
"An employee was driving a stand-up pallet jack in a warehouse. While turning, the jack slipped on oil that was on the floor. The employee's right foot was caught between the jack and the wall, and his large and middle toes were amputated.",0
"An employee was moving livestock. A bull hit a corral gate, which in turn struck the employee. The employee suffered a broken kneecap, a possible throat injury, and a concussion.",1
"An employee was staging sheet metal for manufacturing. The employee bent down to pick up a sheet of paper from the floor. When he stood up, his head struck a piece of sheet metal in a storage rack, and the metal lacerated his scalp.",1
"On July 9, 2020, an employee was in a training class, practicing how to rig and flip I-beams using a chain. His right thumb was slammed between the chain and the beam, causing an avulsion; the thumb tip was medically amputated on July 10, 2020.",0
"An employee was driving a tug with a load into a warehouse. While the employee was trying to disconnect the dolly from the tow tractor hitch, the dolly brake tongue swung and struck his left knee. He suffered a broken leg and was hospitalized.",1
"An inmate punched an employee in the face multiple times, causing facial swelling and a concussion.",1
"An employee was cutting wooden sticks of lumber for a crating operation. When the radial arm saw retracted, it hung up on a small pile of debris. As he reached for a new piece of lumber to cut, the saw blade lacerated his forearm.",1
An employee suffered nose and eye socket fractures while using an ATV.,1
An employee was training a new operator when a machine jammed. The employee had used an adjustable wrench to remove bolts and was clearing the machine when its moving parts amputated three fingertips on her left hand.,1
"An employee fell from a conveyor, landing about 10 feet below and breaking his kneecap.",1
"An employee had been cooking. After throwing water on a pan fire, he fell to the floor. The pan and hot grease fell on top of him resulting in second degree burns to the face, arm, and neck.",1
"An employee was standing on a ladder, using a circular saw to cut siding for a residential construction project. The saw kicked back and struck the employee in the left shoulder, cutting it. The employee was hospitalized.",1
"A pallet jack ran over an employee's left heel, causing a fracture and a laceration.",1
"An employee was cleaning the top of a 19-foot tank. The top gave way and he fell to the bottom, suffering fractures to a lower-back vertebra and four toes on the right foot.",1
"An employee was rigging a heat exchanger to a crane. As the crane was applying tension to the load, the rigging slipped. The employee was trying to move the rigging back into place when his hand was caught in the pinch point. Three of his fingers were broken.",1
An employee had been taking packaged olives off a conveyor. The employee sustained abrasions to her left arm when it was caught between the conveyor and a rolling belt.,1
"An employee was standing at two sawhorses, assembling pieces of wood to be part of a larger concrete form work. She was holding a 2-by-4 with her left hand and a gas-powered nail gun in her right hand. When she fired a 16-penny nail into the wood, it hit a knot, turned out, and punctured her left index finger.",1
"While sanding an axle on a lathe, an employee suffered amputations to the right index, ring, and little fingers (to the first knuckle), as well as the tip of the middle finger when their glove was caught in the lathe.",1
"Two employees were trying to tip a dumpster over onto its front and then onto its top so that they could straighten out the back of the dumpster. One of the doors of the dumpster closed on an employee's left index finger, causing an amputation of the fingertip.",0
"An employee was showing another contractor an upcoming scaffolding job on the outside of an electrical substation. He was standing outside the barrier for a 15-kilovolt rectifier when his pants zipper came in contact with the barrier. Electricity arced from the rectifier to his right arm and then grounded to his zipper, causing electrical burns to his right upper body and pelvic region.",1
"An employee was assisting in positioning a small set of stairs. While on a platform 9 feet from the ground, the employee had a seizure and fell onto the AC unit. He sustained facial fractures.",1
An employee was walking to his car in the parking lot when he was shot in the abdomen by a former coworker who had been terminated a few days earlier.,1
A welder suffered heat-related muscle spasms while carrying out general maintenance welding duties. The employee was hospitalized.,1
"A zoo employee was checking on a newborn pygmy zebu calf. The calf's mother attacked the employee, who suffered head and chest injuries and was hospitalized.",1
An employee was operating a saw when the blade amputated their right index finger and thumb.,1
"An employee was working from a ladder, finishing up wiring on a lighting circuit. When a wire was cut, the employee was shocked and fell about 6 feet onto equipment below. He suffered a severe laceration to the left triceps and was hospitalized.",1
"On 7/10/2020, an employee was using a cable hoist to load a utility terrain vehicle (UTV) onto a trailer. The cable caught the employee's right middle finger, causing an amputation of the fingertip.",0
An employee was re-filling the gas tank of a mobile pump and sustained second degree burns on the front of both legs between the top of the ankle and the mid-thigh area.,1
"An employee was changing a surface casing of a drill rig, pulling it up with the drill pipe. His right thumb was caught in a pinch point between the mast and the casing. The thumb tuft was amputated, along with the soft tissue of the thumb tip.",1
An employee was loading a pallet of merchandise and suffered possible heat stress.,1
"An employee was working to free a stuck overhead door. While trying to get a roller back into the track, a bottom plate which was under tension, came loose, and sprung up striking the employee in the forehead. The employee sustained a forehead laceration and possible skull fracture in the frontal lobe area.",1
An employee was finishing a shift and preparing the miscellaneous pail line for the next (first) shift.  The employee was trouble-shooting the clutch mechanism or making a last-minute adjustment on the curler machine when it cycled and amputated the employee's right index and middle fingers.,1
"An employee had been doing plumbing work at a warehouse. At the end of his shift, he was stepping into his truck when he lost consciousness, fell backwards, and struck his head on the concrete. He was hospitalized.",1
An employee was lowering a tool from a height of about 17 feet. The rope wrapped around his right little finger and removed his flesh to the bone on half his finger on the palm side.,1
"An employee slipped on a wet floor, fell to the floor, and suffered spine disc damage.",1
"An employee was riding a horse, rounding up sick cattle at a feedlot. The horse bucked. The employee fell to the ground and suffered a broken pelvis.",1
An employee was moving a pallet jack when his left ankle was caught between its platform and the wall. He suffered a broken ankle and tibia.,1
"An employee was setting hollow-core plank at a new construction site. The employee fell from the third floor to the second floor, suffering a broken rib and a broken bone in the back.",1
"An employee was using rigging to replace a manhole. The lifting jib fell into the hole, striking the employee in the abdomen.",1
Substrate beneath a track hoe gave way and the machine lunged forward. The bucket struck an employee who was standing in the trench box. The employee was hospitalized for a contusion on their back.,1
"An employee was repositioning a ventilation fan. It shifted and fell over, severely pinching the employee's left index finger. The fingertip was medically amputated.",0
"An employee was climbing down a ladder. The employee fell to the ground, suffered a broken leg, and was hospitalized.",1
"An employee had just finished spray painting the floor of a generator enclosure. The spray paint can was knocked over and ruptured, and the escaping paint vapors ignited. The employee suffered serious burns to the face, neck, hand, and arm.",1
An employee was overcome by fumes while brazing on an expansion valve and copper line set.,1
"An employee was riding a horse to check on cattle when the horse caught a soft spot on the ground causing the horse to bend down and the employee was knocked into a fence. The employee suffered a possible concussion, head laceration, neck pain, and mouth laceration and pain.",1
"An employee was pulling tools up onto the roof. He laid on his stomach and slid off the upper roof onto the lower roof. When he landed, he suffered a dislocated ankle.",1
An employee was unjamming a towel when he was pulled between two conveyor belts. He suffered injuries to his neck and legs.,1
An employee was loading cattle into a pen when two cows charged the employee causing internal injuries and a partially collapsed lung.,1
"An employee was operating a meat press when a mold jammed. As the employee was fixing the mold, the machine activated and his right hand was caught in the machine. The employee suffered lacerations and fractures to the right hand and was hospitalized.",1
"An employee was rotating a carousel stacked with cut lumber when he suffered a hernia. He was hospitalized, undergoing surgery.",1
"An employee was in the process of exiting a scaffold when he lost his balance and fell approximately 3 to 3.5 feet to the ground below. During the fall, he struck a scaffold bracket. The employee suffered bruised ribs and possible internal bleeding.",1
"An employee was cutting metal on a shear machine. The machine cycled and the ram came down to hold the piece of metal. It crushed the tip of the employee's right little finger, which was medically amputated to the first knuckle.",0
"On July 10, 2020, a hospital employee fell, injuring his head and leg. He was hospitalized.",1
Three employees were assembling a wooden truss. A nail from a pneumatic nail gun ricocheted off the truss and punctured the left side of the employee's chest.,1
While delivering products an employee fell about 5 feet off the back of a truck bed and sustained a broken humerus.,1
An employee was driving a pallet jack down an aisle. The jack spun out on a spill; the employee was pinned between it and a middle rack for a moment. He suffered a lacerated ankle.,1
"An employee's chain glove was caught by a wing module on a moving line. Her left ring finger was pinched between the module and a stainless steel guide, causing the amputation of the fingertip.",0
A forklift operator was driving in reverse when he hit the side of a wooden pallet. His right little fingertip was amputated.,0
"An employee was on the 7th rung of a step ladder performing sheet metal work. The employee fell off the ladder and suffered two broken feet, two fractured vertebrae, and a fractured pelvis (two places).",1
"While delivering food to a drive-through line, an employee tripped on the cord from a floor fan. The employee fell, suffering a broken femur.",1
"An employee was pushing a flight out of the gate. While disconnecting the tow bar, the bar dropped onto the employee's left foot. The employee sustained a partial amputation of the second toe and a fractured big toe on the left foot.",0
An employee was removing trap lines from a vessel in order to launch the vessel when the wheel of the forklift carrying the vessel struck and fractured the employee's left foot.,1
The injured employee was holding a door for a co-worker when their finger was pinched between the door and the frame resulting in an amputation.,0
An employee tried to stop a load bar from falling off the back of a trailer. The falling bar struck and injured the employee's pinky finger.,1
"An employee fell down a ladder, landing on both feet and breaking both heels.",1
An employee was delivering a package and was bitten by a dog. The employee sustained serious lacerations and other injuries that required surgery.,1
An employee was cleaning a car wash tunnel with a cleaning chemical when the chemical spilled onto his shoe. The employee was hospitalized with chemical burns to his foot/toes.,1
"An employee was servicing an exhaust fan motor. The fan suddenly began to turn, and the employee's thumb was pulled into the pulley and amputated.",1
"An employee was troubleshooting an air conditioner. The discharge line exploded, and a piece of the copper line went into the employee's leg.",1
An employee was sorting and moving product in the receiving area and began to have an asthma exacerbation. The employee was working with a face covering on.,1
"During demolition of a gel coat booth, an employee stepped on a sheet of plywood and fell approximately 10 feet to the ground. The employee sustained a fracture injury requiring hospitalization. Fall protection was not worn at the time.",1
An employee was delivering mail and felt dizzy. The employee was hospitalized for dehydration.,1
An employee was relocating a steel I-beam when their finger was pinched between the beam and a fixed surface. The left index finger was partially amputated.,1
An employee was on a forklift when the employee's left foot struck a metal beam. The employee suffered toe amputations.,1
An employee was clearing a piece of meat from the drain plug of a meat grinder and suffered amputation of the left middle and ring fingers.,0
"While coming into work an employee walked up the sidewalk, tripped into a ditch along the sidewalk, and fell into a nearby wall. She was hospitalized with a fractured right arm.",1
An employee was operating a meat saw to cut dry-aged beef and amputated her left pinky fingertip. The employee was hospitalized.,1
"An employee was mopping a floor with bleach. The bleach came into contact with the bottoms of the employee's feet, burning them.",1
An employee was moving a container of boiling water off the stove when the water spilled on her leg. She then slipped in the water and fell. The employee was hospitalized with burns.,1
"An employee was using an electric riding pallet jack to unload a trailer when the jack stopped running and the employee fell off. The jack then kept going, striking and pinning the employee to the trailer floor. The employee was hospitalized with a broken leg.",1
An employee was on the loading dock throwing trash into a dumpster. The employee lost balance and fell to the ground. The employee was hospitalized with injuries to the leg and head.,1
An employee was making a delivery at a customer's shop. He fell from a flatbed truck to the pavement and sustained a broken femur. The employee was hospitalized.,1
"On July 13, 2020, an employee was working on the roof and fell approximately 12 to 15 feet to the ground. He sustained a broken patella and was hospitalized.",1
"An employee was setting up work stations and maneuvering a pallet jack down an aisle-way.  Upon setting the load down, he pressed his left thumb against the racks. The handle of the pallet jack then came down and smashed his left thumb. He sustained a crushed left thumb, resulting in an open fracture and partial amputation of the left thumb tip.",0
An employee was cleaning parts in the parts washing area in the brass department and began to feel unwell. The employee was hospitalized for heat stress.,1
While collecting trash on a residential route an employee became dehydrated and suffered heat exhaustion.,1
"An employee was adjusting product placement in the finished part container, which sits on the end of the quench tank. Water splashed out of the tank and landed on the employee causing second degree burns to the left arm and hand and the left side of the torso.",1
While stepping out of an elevator an employee slipped and fell into a table. The employee sustained a laceration to the forehead.,1
An employee was using a mechanical hammer to clean debris from the furnace. As the impact of the hammer knocked debris loose a large section of debris fell and struck the employee resulting in hospitalization for a crushing/blunt force trauma injury.,1
"On July 13, 2020, an employee rolled a flat cart to the outside of the receiving bay door in order to drain standing water off the cart. The cart was next to a delivery truck and when the delivery truck left the dock, the employee fell 3.5 feet off the dock. He was hospitalized with a broken left leg.",1
"An employee was cleaning a packaging machine. While lowering a spiral metal chute, the equipment slammed onto his finger. The employee's right pinky finger was amputated.",0
"An employee was wiring lights when he fell from the fourth step of an 8-foot step ladder. The employee sustained fractures to the clavicle and sternum, and was bleeding from his head.",1
A truck driver experienced heat exhaustion on the way to the company's terminal.,1
"An employee was emptying a small garbage dumpster on a forklift into a larger dumpster. The employee pulled a lever, then grabbed onto the dumpster, which moved and pinched the employee's fingertip between the two dumpsters. The fingertip was partially amputated.",0
"An employee walked onto a floor that was being stripped with floor stripper. The employee slipped and fell on the floor, hitting their hip, back, and head.",1
"A mechanic was servicing an elevator. As he was reaching around to secure a bolt, he was shocked by the electrical wiring. The employee pulled his arm back suddenly which resulted in a dislocation of his shoulder and a fracture in his arm.",1
"At the feed mill, an employee was wrapping red duct tape around a metal trough. His left index fingertip went inside the trough housing through an unseen hole in the metal. The conveyor screw inside the trough caused a partial amputation of the left index fingertip.",0
"While maintenance employees were evaluating an actuator on top of his work box, the injured employee supplied air to see which direction controlled the valve. When the air released, the injured employee's left index fingertip was amputated by the actuator valve.",0
An employee was using a grinding disc to grind concrete. The disc broke and the employee sustained a severe cut.,1
"An employee was walking the zoo grounds and tripped on a crack in the sidewalk. The employee sustained a broken left hip, requiring surgery.",1
"An employee was loading a trash cart onto a trailer. He lost his footing and fell approximately 15 feet, sustaining a fractured right hip.",1
An employee was feeding a piece of stainless steel into a shear press when their fingertip was pinched between the metal part and the base of the press. The fingertip was amputated.,0
"An employee was lifting the trailer hitch of an air compressor and sustained torn muscles in his legs, hips, and buttocks.",1
"An employee was climbing down a scaffold, lost his grip while transitioning to a ladder, and fell 12 feet to a pallet on the ground below. He sustained a twisted ankle and broken bones.",1
"An employee was feeding a branch into a chipper when the branch kicked back and caught the employee's hand between it and the top of the chipper. The employee's fingertip was smashed, resulting in an amputation of the left fifth digit tip.",0
An employee was operating a shear and suffered a partial amputation of the left middle fingertip.,1
An employee had been working on a roof and felt ill. He was hospitalized with heat exhaustion.,1
"On July 13, 2020, at approximately 11:45 AM, an employee was in a bucket truck using a chainsaw to cut a tree. While cutting, the chainsaw got stuck, causing the tree to twist. A rope, which is used to lower the tree, swung and caught the employee around the neck. The employee was pulled from the bucket but was suspended by his fall harness. The employee was hospitalized with neck injuries.",1
An employee was loading a trailer when the tip of their right middle finger got caught in an extendable conveyor belt and was amputated.,0
"An employee had been tasked with roofing work. Upon descending the roof for lunch, a portion of the roof collapsed and the employee fell to the ground. The employee sustained two broken ribs and a head laceration requiring stitches.",1
"A welder was tasked with a repair project on a de-barker machine. He was carrying a 44-pound roll of welding wire to the location. Accessing the de-barker drum requires walking down a rubber conveyor. While stepping onto the conveyor, the employee slipped. This caused him to drop the roll of wire onto his right hand. He sustained crushing injuries to the fingers on his right hand and required surgery for his right middle finger.",1
"On July 13, 2020, at approximately 4:30 p.m., an employee was removing a bale (12"" x 10"" x 8"") of scrap aluminum from the discharge area on a baling machine. His right little finger was caught in the baling press area and was amputated to the first knuckle.",0
"An employee shut off the leveler and climbed on the tarp to straighten it. As he was stepping off the tarp, the leveler started back up. The employee slipped. His foot landed on the leveling paddle and his leg got caught between the rotating paddle wheel and the frame. The employee’s lower leg was fractured.",1
"An employee was doing a final inspection to verify that all contracted work had been completed. While retrieving a paint tray that was left on the roof, he fell approximately 8 to 10 feet from the roof to a bed of rocks and a concrete sidewalk. He was hospitalized with a fractured vertebra, a fractured toe, a broken wrist, a cut on his forehead that required stitches, and a bump on the forehead.",1
"An electric gate at a third party facility would not operate. The pin pad had been disabled and the chain had been unhooked from the operator for the gate. An employee was manually opening the gate (pushing it open) when the chain got caught on a bolt or other object. While the employee was trying to release the chain, the gate moved, causing the employee's hand to go through a roller. He sustained contusions and lacerations to four fingers and a partial amputation of his left middle fingertip.",0
"An employee had been rigging long-span steel joists for hoisting when several joists that were leaning against a wall fell, striking the employee's foot. The employee sustained a compound fracture to the ankle.",1
An employee was working above ceiling tiles installing a junction box. The employee fell from a ladder and sustained a skull fracture.,1
"On July 14, 2020, an employee was felling a tree from the ground using a chainsaw when a tree trunk hit his pelvis area. The employee was hospitalized with a fractured pelvis.",1
"A lighting fixture slipped out of an employee's hand. As he tried to catch it, the sharp edge of the fixture cut his wrist in two places, severing the tendon.",1
"An employee was inspecting the installation of a peel and stick membrane on a residential roof. The employee tried to peel off a section of the membrane, lost his balance, and fell approximately 12 feet to the concrete ground. The employee suffered a fractured back and dislocated wrist.",1
An employee was removing a jammed bundle from a conveyor when their finger was pulled by a sheet metal guide. The employee sustained an amputation of the right ring fingertip.,0
"After carrying out tire servicing, waiting on maintenance shop customers, and answering phone calls, an employee became ill. He was hospitalized, suffering from heat stress.",1
"An employee was pulling a rear sway bar off of a vehicle when a piece of metal came loose and hit him in the eye. He sustained a tear to the iris and cornea of the right eye, requiring hospitalization and surgery.",1
An employee was changing a tire on a forklift when the forklift slipped and smashed his right hand. The employee was hospitalized with possible broken bones.,1
"While using a band saw to cut meat, an employee's thumb was amputated at the first joint.",0
An employee was operating a slitting machine when his left hand was contacted by either the coil or the mandrel. His left index fingertip was amputated.,0
An EMT was responding to a grass fire and went into a home to evacuate it. The employee suffered smoke inhalation and was hospitalized.,1
"An employee was guiding an overhead crane C-hook into coils of sheet metal. His hand was on the back side of the C-hook when it struck another master coil. His finger was caught between the C-hook and the coil, resulting in a partial amputation of his right distal pinky finger.",1
An employee was driving a loader with pipes attached to the bucket. The loader's rear wheels left the ground while it was driving down a hill. The employee then lowered the bucket and the loader began bucking. The employee was thrown around inside the cab. He was hospitalized with a compressed disc in his neck and pinched nerves.,1
"An employee was driving on his designated route, delivering mail, when he felt cramps in both hands and both legs. The employee suffered dehydration.",1
"Two employees were performing work on an automated welder. One employee was operating the main control panel and the injured employee was working at the rear of the machine. When the machine was restarted, it pinched the injured employee's pinky finger causing an amputation of the fingertip.",0
An employee was carrying an 8-inch cast iron casting from the yard when he tripped on a pallet of ready-mix concrete bags and fell. His right thumb was pinched and severely lacerated.,1
An employee exited the passenger side of a refuse truck to collect garbage. The truck's passenger side front tire rolled over his right foot causing a crushing injury to the foot.,1
An employee was using a knife to cut sheets into rags when the knife cut their right thumb. The laceration resulted in amputation of the thumb tip.,0
"On 7/14/2020, an employee on a loading dock was scanning a barcode that was attached to the rear door of a trailer. The employee lost her balance and fell 45 inches from the dock to the cement ground. The employee sustained a broken left arm, requiring hospitalization and surgery.",1
"On July 14, 2020, an employee was operating a machine that wraps plastic film over seafood trays when the plastic film became jammed. As he attempted to pull out the plastic from the back side of the machine with his right hand, the machine's blade amputated his right middle fingertip.",0
An employee was operating a pallet jack in reverse when it struck a rack. The employee was pinned between the pallet jack and the rack and sustained broken bones and internal bleeding.,1
An employee was making trial parts in a press when the press unexpectedly stopped. The employee reached into the die and the press finished its cycle causing fractures and lacerations to the employee's wrist.,1
An employee was picking up trash on a route and operating the levers that put the sweep blade into motion to sweep recycling materials into the body of the rear-load truck. The sweep blade knocked some of the material out of the hopper. The employee was pushing material back into the hopper when his left hand was caught by the sweep blade. The thumb on his left hand was pinched and broken.,1
"An employee was on the raised platform of an order selector. While trying to reach something, he fell to the ground resulting in fractures to both legs.",1
"An employee was turning a plastic part in a puller machine when his left hand was caught in the machine, resulting in multiple lacerations and stitches. He was hospitalized.",1
"An employee was moving furniture. When the piece being carried bumped into a stationary object, the carried piece's glass shattered. The glass lacerated the employee's arm resulting in a cut artery and nerve.",1
"An employee was operating a roll former when either his glove and/or a rag was caught in the machine. He was hospitalized with partial amputations to the right middle, ring, and pinky fingers. The machine was not guarded at the time.",1
An employee was assisting with cutting a tree. A branch that was being cut spun on the rope and struck the employee. He was hospitalized with fractures to the ribs and pelvis.,1
"On July 14, 2020, an overhead linesman was standing in his bucket waiting for the rope which pulls the wiring lead conductor. The roller broke and a piece of it projected towards him striking his left arm. He was hospitalized with a broken left arm.",1
"An employee was inspecting the inside of an industrial heat treating furnace. A defective relay allowed natural gas to flow into an area of the furnace and the gas was ignited by the radiant tube heating system. The employee was directly in front of a fireball that came from the oven, and sustained second degree burns to the head, face, and neck.",1
A delivery driver had clocked out and gone home after his shift. The employee later called management and informed them he felt ill. The employee was hospitalized due to heat stress and dehydration.,1
"An employee was climbing an extension ladder to access a roof when the ladder kicked out at the bottom. He was 8 to 9 feet above ground level and tried to hold on to the roof line to stop falling.  However, the ladder continued to kick out and he fell, sustaining a sprained left ankle and knee, two fractured disks, and a broken tailbone. He was hospitalized.",1
Three employees were moving a patient. The patient fell and one of the employees sustained a back injury requiring hospitalization.,1
An employee was working as a rigger for a crane that was putting a separator on a trailer. The rigging slipped as the load touched down and the chain struck the employee. The employee was hospitalized with a compound fracture of the left arm.,1
"An employee was cutting a large tree (135') in order to provide an anchor point for the yarder. When the tree came down, it landed on several root wads that were on the ground from a previous felling operation for road clearing the year before. The rood wads moved another tree (50') that was covered with brush. The arms of the tree that was on the ground came up and struck the employee in the face. The employee sustained a concussion, a broken and lacerated nose, severe bruising and a fractured eye socket, and a punctured lung.",1
"An employee was gathering carts in the parking lot and putting them on the cart mule. The employee was walking back to the mule and was hit by a customer's vehicle. The employee was thrown approximately 25 feet from the point of impact and sustained a broken leg, a broken wrist, and other injuries.",1
"An employee was throwing away scrap. In the scrap bin, the employee moved a mandrel hanger to an empty spot and his right little finger got caught against another mandrel resulting in amputation.",0
An employee slipped and fell while entering a warehouse. The employee was hospitalized with a lower back injury.,1
"An employee was on a dock attempting to dislodge a tarp winder that was caught on a truck trailer. When the tarp winder became dislodged, the employee fell 4.5 to 5 feet to the concrete floor between the dock and the trailer, cracking his pelvis and seven ribs.",1
"An employee descended from a forklift to fill a container with a chemical from a tote that was mounted on the forks of a forklift. The chemical tote hit the employee, resulting in injury and hospitalization.",1
An employee was using a ratchet wrench to loosen a bolt. The adapter that holds the socket on the wrench broke. This caused the employee to fall to the ground and sustain a broken right femur.,1
"An employee had been making a bale with the baler. While ejecting the bale, she noticed the metal wire was stuck on the chain in the machine. The employee cut the wire free. The bale then fell, knocking her over and resulting in two broken wrists. She was hospitalized and had surgery.",1
"An employee was putting a grease container on a fuel service truck at the fueling station. He tripped and fell on the ground, sustaining a dislocated knee that required surgery.",1
An employee fell on the floor and fractured their wrist. The employee was hospitalized.,1
"An employee was on a truck picking up road cones when he fell off the back of the truck, suffering a broken ankle and head laceration.",1
"An employee was using a hand truck to move a refrigerator from the shipping container to the receiving area. While moving the appliance onto the dock plate, the weight of the refrigerator caused her to fall onto her back and the refrigerator landed on top of her. The employee was hospitalized.",1
"While standing next to a forklift, an employee was struck by another forklift that was backing up. He was pinned against the forklift that he was standing next to. The employee's leg was further injured when the vehicle turned to pull away.",1
"While walking, an employee was struck from behind by a forklift that was backing up. Both of the employee's legs were amputated.",1
"An employee was operating a machine. While clearing a jam, the blade amputated their left ring fingertip.",0
An employee was performing maintenance on a depanner conveyor when their finger was caught between a chain and sprocket. The right index finger was amputated.,0
An employee was assisting with the hoisting of a concrete barrier. The hoist chain caught the employee's thumb against the concrete barrier and the thumb tip was amputated.,0
"A temporary employee was working with a garbage collection truck. The employee's finger was cut by the edge of a television while picking it up. He sustained an amputation of the left ring finger, was hospitalized, and had surgery.",1
Two employees were performing maintenance on a shear. One of the employee's hands slipped during a lift and the guard fell on their right middle finger. The fingertip was amputated.,0
"An employee was pulling wire on the ceiling of a structure under construction. The employee fell through an opening in the ceiling, landing on the concrete floor about 9 feet below and suffering a broken lower-back vertebra.",1
"An employee was on the back of a work truck platform. As he was stepping off the platform, he slipped and fell, struck his head, and sustained a skull fracture.",1
An employee was monitoring the flow of lumber at the even end rollers of the planer mill's stacker unscrambler. A board skewed off the even end rollers striking the employee and causing him to fall and hit his head on the floor. He sustained a laceration to the back of the head.,1
"An employee walked to the back of the assembly line to sign off on the completion of the fail-safe process. When they were returning to the front side of the assembly line, the employee stepped inside the frame of a finished goods cart and tripped, striking their head and right shoulder against the cart and the floor. The employee was hospitalized with a head laceration and a dislocated right shoulder.",1
A fire occurred while an employee was transferring fuel from a larger tank to a smaller tank on a pickup truck. The employee was burned on the right arm and the right side from their armpit to their waistline. The employee was hospitalized.,1
"An employee on a horse was pushing yearlings (cattle) out of the willows to the meadow. The employee was riding his horse over to rope a yearling when the yearling turned quickly, along with the horse. The horse slipped on wet grass and fell on top of the employee. His leg was caught between the horse and the ground. The employee was hospitalized with a broken pelvis.",1
"An employee was spotting for the operator of a road paver as it was backing up. The employee was struck by the paver and caught against a road roller machine. He sustained injury, including a crushed artery, to the left thigh requiring surgery.",1
An employee was connecting electrical pipes. A pipe slipped and struck the employee's finger.,1
"On 7/15/2020, an employee was working near the barb wire manufacturing machines. He was making sure wire was in the machine and was adding and removing spools of wire. The employee experienced cramps and was hospitalized for dehydration.",1
"An employee was walking to her car when she tripped and fell in the parking lot, fracturing her shoulder and breaking her wrist.",1
An employee was descending stairs and missed the bottom step. The employee fell on his right elbow.,1
"An employee was delivering mail when she stepped on a board which broke, causing her to twist and fracture her ankle.",1
The injured employee stumbled while walking and bumped into another employee that was using scissors to cut poultry. The injured employee was struck by the scissors and was hospitalized with a puncture to the right side of the chest.,1
"An employee was performing roofing work, suffered heat exhaustion/heat stroke, and was hospitalized.",1
"An employee was changing the plastic film roll on a conveyor belt when the employee's finger was caught between the conveyor chain and the chain cover, resulting in a fingertip amputation.",0
"An employee was moving a generator at a storage yard. While re-adjusting the generator on a trailer, the rope snapped and the employee was ejected from the bucket truck. The employee fell to the ground, hitting the trailer on the way down. The employee sustained fractures to the ribs, hip, and left leg.",1
An employee was working in the cooler when their foot got caught in the floor chain that moves product throughout the cooler. The employee sustained crushing injuries to the right foot.,1
"An employee had been operating fans with wind-power equipment. The employee fell backwards, off a ladder, approximately five feet to the lower surface. The employee sustained a lower back and tailbone injury.",1
"An employee descending from an 8-foot step ladder lost his balance and fell to the concrete floor, breaking his wrist and hip.",1
An employee was helping to install steel piping for a water well. A well digging machine was holding the pipe vertically and moving it into position when the pipe came out of the holder and fell on the employee's left foot. Several toes were crushed and had to be amputated.,1
"An employee was moving a load of steel with a forklift. The load shifted, so the employee got off the forklift to straighten up the load. The load fell on him and injured his back.",1
An employee fell on a slippery belt loader that was wet due to rain and broke the right ankle.,1
A YRC driver was standing in front of a freight dock waiting for paper work. The driver was struck from behind by a trailer that was backing into the dock. The driver felt the impact in their hip/back area and immediately turned to the left and fell to the ground. The injured driver was hospitalized with a possible fractured pelvis.,1
"An employee was leak testing gas riser parts when the leak tester's sliding clamp returned to its home position and caught his left index fingertip, resulting in a partial amputation.",0
An employee was walking in the parking lot and was struck by a tractor trailer that was in the process of parking. The employee sustained fractures to a rib and elbow and head lacerations.,1
An employee was operating a hydraulic press and attempting to remove a cut piece of metal when the machine was actuated and amputated his left index and middle fingertips.,0
"An employee was preforming daily maintenance on an asphalt crusher when he lost his balance and fell approximately 8 feet to the ground, hitting his head. He was hospitalized.",1
"An employee was removing tooling components from a 2,000-ton trim press. He was using a ratchet to loosen the bottom bolts to secure the tooling. The weight of the upper portion of the tooling was secured by a 2 x 2 block of wood. This block failed, allowing the top portion to contact the employee's hand and crush his left middle finger. He was hospitalized for surgery.",1
An employee was moving a flat bar/plate from a storage rack using an overhead crane equipped with a lifting magnet. The magnet detached from the plate and the plate struck the employee's left forearm as it fell to the ground. The employee sustained a severe laceration.,1
"An employee was swabbing a valve at an oil well site when the swab tool spun around and struck him in the torso. He sustained a broken right arm, broken sternum, and a concussion. The employee was hospitalized.",1
"An employee was working with an air handling unit when his head struck the unit, causing numbness in his arm, head, and neck.",1
"An employee was holding a box down on a box printer machine when the employee's left hand became pinched between the feeder opening and the guide that pushes the box into the machine, resulting in an amputation of the ring fingertip.",0
"An employee was cleaning a roll forming machine when it activated, causing the partial amputation of a finger.",0
"A high-pressure hose separated, swung, and struck an employee's arm, breaking it.",1
"An employee was airing up a single tire on an implement rim when the tire blew off the rim, resulting in facial fractures requiring hospitalization.",1
An employee was making cuts on a 20-inch long piece of material using a radial arm saw. One of the pieces cut crooked. The employee went to even the cut and the blade caused a severe laceration to his left thumb.,1
An employee was using a table saw to cut through 2 inches of ISO insulation when his thumb was amputated. It was later reattached during surgery. The palm of the hand was also injured. The employee was hospitalized.,0
An employee received an electric shock while connecting a new construction residential home to an outside pedestal.,1
An employee was cutting wood with a circular saw when it kicked back and lacerated the inside of his right leg below the knee. He was hospitalized.,1
"An employee was trimming a tree limb with a chainsaw. When the limb started to come down, the employee reached to grab it and the chainsaw cut his right wrist/hand, including an artery. The injury required surgery.",1
An employee was reversing a forklift into a parking spot when the employee became dizzy and lost control of the forklift. The employee collided with a rack and sustained a lower left leg fracture and laceration.,1
"A delivery driver was lifting bundles of wire mesh off a flatbed trailer using a truck-mounted lift. As he was lowering the mesh, the lift tipped over and ejected him forwards. He landed on the ground and was injured.",1
"At approximately 1:33 PM on July 17, 2020, an employee was walking toward a water dispenser to refill her water bottle when she tripped over a safety mat and fell to the floor, breaking her humerus. She was hospitalized.",1
"An employee was supervising a shift starting at 5:30 PM and was also assisting in running the glass machines. Around 2:30 AM, the employee began to cramp up and went home. He was later hospitalized with heat exhaustion.",1
"On 7/17/2020, at 3:00 PM, an employee entered a screen machine to clear debris from the spindles and discs. The employee exited the screen machine via the downstream conveyor. The employee walked alongside the conveyor to exit the area and fell through a material chute at the end of the conveyor to the ground 17 feet below. The employee was hospitalized for a concussion and fractures to the left leg, pelvis, ribs and face.",1
An employee fell approximately 10 to 12 feet from the top of a concrete masonry unit wall to the ground.,1
"An employee was walking by a pit at the bus maintenance garage when he slipped and fell at least 6 feet down into the pit. The employee was hospitalized for broken ribs, a punctured lung, a head contusion and possible bleeding on the brain.",1
"An employee was seated behind a desk. The employee stood up, turned, lost balance, tripped and fell, sustaining a broken left hip.",1
An employee was climbing a ladder while carrying a piece of aluminum fascia when the fascia contacted an overhead power line. The employee received an electric shock.,1
While an employee was adjusting a stop on a machine the machine engaged and amputated the employee's fingertip.,1
An employee was guiding a small piece of metal into a shear cutter when the blade partially amputated his left middle finger (no bone).,0
"An employee was attempting to bend back a loose pulley onto the mast of a powered industrial truck when the employee made contact with the lever. The mast then tilted back, causing the employee to become caught between the truck's mast and overhead guard. The employee sustained abdominal injuries and intestinal bleeding.",1
"An employee fell from a fixed ladder while closing a ceiling hatch, shattering both heels and sustaining a laceration to the back of his head.",1
An employee tripped on the arm of a machine and fell into hot asphalt. He sustained burns and was hospitalized.,1
"An employee was team lifting a frame from the ground and trying to hang it on the non-powered spur of an overhead conveyance system when the frame slipped and struck the employee's right forearm, causing a laceration.",1
An employee was using a grinder to cut mortar joints in a concrete masonry unit when the grinder kicked back and cut into the right side of his face/mouth.,1
An employee was unloading windows out of a box truck at a customer's place of business when the windows fell over and knocked him out of the truck and onto the ground. He sustained a fractured rib and punctured lung.,1
"An employee was operating a forklift to stack insulation and attempted to reverse the forklift. The forklift contacted another roll of insulation, which fell on top of the forklift. The employee stepped out of the forklift to remove the insulation. The insulation then hit the ground and bounced, striking and breaking the employee's left fibula.",1
An employee was stabbed multiple times by a shoplifter in the store and suffered a head injury.,1
"On July 17, 2020, an employee was using a circular saw to cut a piece of a window sill when a small piece of wood became stuck, causing the blade guard to not fully retract. The blade then kicked back and lacerated his leg.",1
An employee was making precast connections at the construction of a new air tower. The anchor gave way and the employee fell 3 to 4 feet to the next level resulting in a fractured left leg.,1
An employee was standing on top of a sand truck. The truck moved and the employee fell approximately 8 feet to the ground below. The employee sustained injury to his ribs and a laceration to his head.,1
An employee fell while walking and was hospitalized.,1
While operating a forklift an employee became ill and fell to the ground. He fractured his neck and was hospitalized.,1
"On July 17, 2020, two employees were using a 6-wheeled utility vehicle to assist them in traveling between rows of apple trees to pick up pruned branches from the ground. At approximately 10:00 a.m., the injured employee was picking-up branches and was struck by the utility vehicle. The injured employee was hospitalized with multiple fractures of the sternum, pelvis, and ribs.",1
An employee was providing security services when a customer came in the facility and started stabbing people with a knife. The employee suffered multiple stab wounds.,1
An employee was bitten/stung by a small animal (insect or similarly sized) while cleaning a student dorm.,1
"An employee was trying to clear a slab that was jammed in a saw when his right arm contacted the saw, resulting in an amputation below the elbow. The saw was operational at the time of the incident.",1
An employee was gathering brush on the ground when a 4-inch by 2-foot piece of wood fell and struck the employee's hard hat. The employee sustained a bruised spinal cord.,1
An employee was moving concrete barrier blocks when their pinky finger got caught between two blocks. The finger was fractured and required surgery.,1
"An employee fell from a ladder that was more than 15 feet high to the unpaved dirt ground, suffering a broken clavicle as well as broken ribs and vertebrae.",1
"While cutting and trimming grating with a torch, an employee cut the grating he was laying on and fell 7 feet to the concrete ground, fracturing his left hip.",1
"An employee was flagging traffic when a vehicle veered into the work zone and struck the employee. The injured employee sustained a torn aorta and fractures to the hip, arm, and hand.",1
"An employee was laying sheathing onto a flat roof. A sheet of OSB slipped out and he fell through the roof trusses to the ground 17 feet below. He suffered a broken right ankle, two damaged vertebrae, and soft tissue injures and was hospitalized.",1
"A temporary employee was using a cordless drill to attach a hose clamp to machinery. The drill arced, which caused a fuel bucket to ignite. The employee's left arm and right hand were burned by the fire.",1
"An employee climbed on a conveyor to unjam a box. While dismounting the conveyor, he was flipped and then fell on his arm. He sustained broken bones in his right forearm.",1
An employee was walking down a stairway when his knee buckled.,1
"On 7/18/2020, at 1:30 PM, an employee fell from a ropes course while doing some maintenance work. The employee was hospitalized with a dislocated elbow and fractured pelvis.",1
A paramedic and was providing patient care in full personal protective equipment (PPE) and became dehydrated. The employee was hospitalized.,1
"An employee was cutting a chain length with an angle grinder when the grinder kicked back and cut the employee's left forearm, requiring hospitalization.",1
"An employee was on the ground using a chain saw to cut a tree that was storm-damaged when he slipped and dropped the chain saw. He then fell on the saw blade, cutting his arm and requiring hospitalization and surgery.",1
"An employee was at the door of a pulpit. His left hand was on the door jamb when the door closed on and pinched his left ring finger, resulting in a left ring fingertip amputation.",0
An employee was maneuvering a pallet of produce when it began to tip over. Produce fell off the pallet onto his right ankle causing a contusion.,1
"After cutting wood on a table saw, an employee turned the saw off and attempted to grab the cut pieces of wood. The still-rotating blade then partially amputated his right ring finger and amputated his right middle finger and right index fingertip.",0
An employee was using chemical cleaning products to unclog a sink drain when the employee inhaled the chemical mixture and suffered respiratory irritation.,1
"On July 18, 2020, a temporary employee, who is supervised by Imeson Distribution Center, was dissembling racks. The employee was using a platform on a forklift to  reach the first rack's crossbars. The employee fell 5 to 6 feet from the forklift to the ground. He was hospitalized with a broken left elbow.",1
An employee was removing an electric pallet jack from the equipment room when the pallet jack crushed his foot against the wall. The employee's left foot was amputated at the hospital.,0
An employee was troubleshooting a cutting machine. He lifted the pusher and the machine activated. The machine then struck and injured his right elbow.,1
"An employee was working on an HVAC system replacing a belt on an exhaust fan. The cover to the exhaust fan was on his left on the roof surface. The employee took a picture of his completed work,   and stepped to the left when his pants caught on the edge of the exhaust fan cover. He then fell backwards onto a rooftop access hatch. The employee sustained three broken vertebrae and four broken ribs.",1
An ABS employee fell and was hospitalized.,1
An employee was detasseling corn and felt ill. The employee was hospitalized.,1
"An employee was attempting to saw down a small pine tree near a larger rotting pine tree when the small tree fell against the larger tree and jolted it. An upper section of the larger pine became dislodged and fell several minutes later. The employee was struck and pinned to the ground by a protruding branch of the trunk section that fell. He suffered crushed vertebrae, broken ribs, and a collapsed lung.",1
An employee fell to the ground while climbing down a ladder and sustained a broken leg/ankle.,1
"An employee was operating a pallet jack in the warehouse when his foot was caught between the standing platform of the pallet jack and a support column. The employee was hospitalized with a crushed right foot, requiring surgery.",1
"Employees were setting large sandbags along the edge of a retaining wall using an excavator to lift the bags into place. An employee was attaching the hook when his right index finger was caught between the hook and the nylon strap. When the load was lifted, the finger was amputated at the first knuckle.",1
"An employee was checking on an error. He went to level off the tabber equipment when the machine turned on, amputating his right middle fingertip.",1
"An employee was operating a forklift. While traveling on the dock, the forklift hit a guardrail and stanchion pole. The employee's leg was pinched between the stanchion and the forklift resulting in a fractured left foot.",1
"An employee was working as a cashier inside the fuel kiosk while the roof was being replaced. The employee became nauseous, got a headache, and experienced chest pains from the fumes inside the kiosk.",1
An employee was operating a forklift when it struck a safety bollard. His left thumb was caught between the forklift and the bollard and amputated.,0
"An employee was breaking up hardened residual ash to remove it from the inside of the second chamber of a dryer during a scheduled outage of the equipment. A piece of the ash fell and pinned the employee's legs. Interior layers of the residual ash were still hot, causing third degree burns on the right leg, second degree burns on the left leg, and second degree burns to portions of both arms. The employee was hospitalized.",1
A test plug blew off and struck an employee in the face. The employee was hospitalized.,1
An employee was moving a portable fan when their fingers were contacted by the blades resulting in amputation of the ring fingertip.,0
"An employee was working behind a register. There were wires connected to a counterfeit bill checker that were under the counter. As she passed by, her foot became tangled in the wires causing her to fall and strike her hip and head on the floor. She sustained a broken left hip and injury to the head.",1
An employee was standing between two concrete forms. One of the forms was lifted and during the lift it shifted and struck the employee's leg. The employee was hospitalized with injury to the ankle and knee.,1
An employee was mixing cement using a cement mixer when he felt ill. The employee started sweating and became lethargic due to possible heat stress.,1
An employee was cleaning up and sweeping the floor inside the facility when he fainted. The employee was hospitalized.,1
"An employee was standing on top of a ceiling joist in attic space to install an HVAC vent system. The ceiling joist cracked, split, and broke in half causing the employee to fall approximately 10 feet. The employee was hospitalized for a concussion and head, back and neck trauma.",1
"While operating the edger and long chain conveyors, an employee's glove got caught between the roller and guard. Three fingers were crushed.",1
An employee had been repairing a roof and later that evening was hospitalized for dehydration.,1
"An employee was driving a utility vehicle (UTV) on sloped terrain on the side of the road, off the public way. The vehicle rolled several times, hitting the driver. The employee was hospitalized.",1
An employee was delivering mail and suffered heat stroke.,1
"An employee was on a wooden ladder climbing to the second floor of an apartment complex. The ladder gave way, causing the employee to fall to the ground. He sustained fractured ribs.",1
"A forklift operator had just placed a 3-high stack of bundled lumber on the ground. He then backed the forks out from underneath the bundles and exited the forklift. He used a pair of snips to cut the nylon banding off the top bundle. The top bundle moved and the bottom board fell to the ground. As the employee moved away from the stacked bundles, he tripped over the forks and fell to the concrete ground. The employee was hospitalized with fractures to the right ilium and femur.",1
An employee fell approximately 10-12 feet off a ladder and was hospitalized.,1
The injured employee slipped and fell while practicing tactical body carrying. The trainee being carried landed on the injured employee's ankle and broke it.,1
"An employee was under a truck using a stethoscope to diagnose a problem. The rear of the truck was on a lift, raised about 1 foot; the front of the truck was on the ground. The employee was pinned under a spinning tire and sustained chest compression.",1
"While working in the facility, the injured employee's throat was cut by another employee.",1
An employee tripped over a curb and injured their wrist requiring surgery.,1
An employee was using a chain hoist to lift a cant from a conveyor. The cant swung and crushed the employee's fingers against the conveyor frame resulting in amputation of the left ring and pinky fingers.,1
An employee was using a boom lift to access and install a light bracket on the side of a bridge. The bracket came loose and struck the employee causing injury to the forearm that required surgery and hospitalization.,1
An employee was cleaning an empty hospital room using a cleaner with bleach. He developed breathing problems after inhaling the bleach fumes and was hospitalized.,1
An employee was driving a forklift when his left foot struck a pallet of freight and was fractured.,1
"While cleaning an automatic screw machine, an employee's left thumb was crushed and partially amputated in the machine. The employee was hospitalized and had surgery.",1
"An employee was loading and unloading boxes of chickens onto a freight elevator. The elevator's doors struck the employee, breaking both arms.",1
An employee turned on belt washers to help the sanitation crew. A hose then whipped and the fitting on the end of the hose struck the employee's left leg resulting in a compound fracture.,1
An employee was lowering a bundle of PVC pipe links with a truck's tailgate when his hand was caught between the lift gate chain and the lift gate. His right index finger was fractured.,1
An employee was walking in the facility when they stepped in front of a traveling powered industrial truck (PIT). The PIT stopped abruptly and stretch-wrapped barrels of product rolled forward off the forks and contacted the employee. The injured employee was knocked to the floor and sustained a fracture to the pelvis and left wrist.,1
"An employee sustained amputation, crushing, and laceration injuries to his right hand while setting up a roll form machine.",1
An employee was operating a screw machine when the gears caused an amputation to three fingers on their left hand.,0
"At 12:10 p.m. on July 20, 2020, a city mail carrier was delivering a parcel at a front door when a dog charged through the screen door and began to chase him. As he ran from the dog, he fell and his head struck the curb. He suffered a concussion and lost consciousness and was hospitalized.",1
A mini-excavator was being loaded onto a flatbed trailer when it rolled over the side of the trailer and struck an employee. The employee was hospitalized with a bruised kidney.,1
An employee of West Texas Boring was 2.5 feet from the edge of a pit trying to measure the distance of the water line. The ground gave way under his feet and he slid down into the pit. The employee was buried up to his waist in approximately 4 cubic yards of heavy rock and dirt. He sustained fractures to the ribs and a leg.,1
An employee was walking backwards with a powered pallet jack when their leg was caught between the pallet jack and a pole. The employee was hospitalized with a broken tibia/fibula.,1
An employee's left little finger was caught and lacerated in a cutting machine.,1
"While walking down the hall an employee tripped and hit their head on a wall, resulting in a concussion.",1
"An employee was using a table saw equipped with a dado blade to cut a notch in a board. When the employee turned on the saw, the dado blade caught the board and kicked it back, causing the employee's left hand to contact the dado blade. Three fingertips were amputated.",0
The employee was working from a bucket truck transferring live wires from an old power pole to a new pole. The employee's lanyard got close enough to a live wire that an arc flash occurred. The employee sustained second degree burns where the metal parts of the harness contacted his body.,1
"An employee was changing an air filter in an attic. The employee fell through the ceiling to the floor 13 feet 9 inches  below, suffering a broken wrist and a concussion.",1
A driver was delivering groceries from a truck to a store. He slipped on the ramp at the back of the truck and fell to the ground along with the dolly he was using. He suffered a broken right ankle and was hospitalized.,1
An employee was moving product through a warehouse using a powered industrial truck (PIT). The PIT reversed and struck a post. The employee sustained a broken left tibia and fibula.,1
An employee was stocking shelves of vitamins using a 3-tiered step stool. The employee missed the last step while descending the step stool and fell backwards to the floor. The employee sustained a broken left hip.,1
The injured employee was painting while another subcontractor on the same floor was using a generator to conduct welding. Carbon monoxide from the generator accumulated and overcame the injured employee.,1
An employee was removing pipe from the lifting hook when the pipe slipped out of the hook and partially amputated the employee's right middle finger.,0
An employee was standing nearby while a dump truck dumped a load of gravel. The employee tried to manually remove a rock that was stuck in the tailgate and suffered a fingertip amputation.,0
An employee was hospitalized due to heat stress.,1
An employee was repairing an automobile when the vehicle's control arm dropped on the employee's left hand. The employee sustained an amputation to the nailbed and first knuckle of the left middle finger.,0
An employee was doing a walk-around inspection of a tractor trailer when he tripped and fell over a tire that was hidden in the grass. His knee was dislocated.,1
An employee was sorting packages on the conveyor belt. The employee felt cramps throughout their entire body and was hospitalized due to heat stress/dehydration.,1
"An employee was removing excess butter from a machine when the filler caught the employee's disposable glove, forcing their finger into the mold. The employee sustained lacerations and fractures to two areas of their left middle finger.",1
"On July 21, 2020, after working the morning in his office, an employee filled in for a delivery driver in the afternoon. He fell ill after the end of the workday and was hospitalized with symptoms of dehydration.",1
An employee slipped and fell approximately 5 feet to the floor from a shelving unit. The employee sustained contusions to the face and a compound fracture to the right ankle requiring hospitalization.,1
"An electrician was performing repair work on an electric panel and tightening the lugs on some wires in the panel. An arc blast occurred resulting in burns to his face, arms, chest, and neck.",1
"On 7/21/2020, an employee was standing on the tines of a forklift to repair a trailer door and fell to the ground. The employee was found unresponsive next to the trailer with head and neck trauma.",1
An employee was bending rebar on a rebar bending machine when their finger was caught. The fingertip was crushed and was amputated at the hospital.,0
"An employee had been conducting framing work. The employee was laying plywood to a window opening and was leaning against the guardrail. The guardrail gave way and he fell from the third floor. He struck a beam on the second floor and landed between two concrete platforms in the grass. The employee sustained multiple injuries including a compressed fracture with retropulsion at the L2 vertebra, a pelvic fracture, and a non-displaced sacral alar fracture.",1
An employee was pushing electrical wire through an underground conduit. The electrical wire arc-flashed with a switch gear and the employee sustained burns to the hands and face.,1
An employee was stepping off a truck crane and fell from the ladder to the ground fracturing an ankle.,1
"An employee was helping to set the pick on the anchors. The approximately 15-foot rail fell and hit the employee. The employee sustained an injury to the legs or spine, and a fractured foot. The employee was hospitalized and required surgery.",1
An employee fell through an opening in a deck. He landed about 7 feet below and suffered a broken hip.,1
An employee was cutting a piece of aluminum with a bandsaw when he sustained the amputation of approximately 1/2 inch of the right index fingertip.,0
"An employee was returning a client to bed from the shower. The employee slipped and the client rolled out of the bed, landing on the employee's leg and fracturing the patella and fibula. The employee was hospitalized.",1
An employee was clearing debris from a conveyor when a pedal on the machine caught his right index finger resulting in an amputation to the first knuckle.,0
The injured employee was in the nose of a 53-foot trailer inspecting a piece of freight. Another employee pulled onto the dock plate at the rear of the trailer and the freight fell on the injured employee's leg. The employee was hospitalized with a broken femur.,1
"While loading a dumpster, an employee turned, fell to the ground, and sustained a fractured hip.",1
An employee was cutting plywood on a table saw and amputated a fingertip.,0
An employee fell down a flight of stairs when her heel got caught on one of the stair treads. The employee sustained a fractured tibia.,1
"An employee was checking a dewatering pump when he fell from a step stool, landing on his chest and fracturing two ribs.",1
"While cleaning a mill roll, an employee's finger was caught by metal on the moving roll. The employee sustained a partial amputation of the right index finger.",0
An employee was sanding drywall while standing on a 6-foot step ladder. She fell and sustained a fractured left ankle.,1
"On July 22, 2020, an employee was loading material onto a machine when his back struck the static metal bar on the machine. The employee's back was injured and the employee was hospitalized.",1
"An employee was hooking up a tandem trailer. While attaching the dolly section, the employee was pinned between the dolly and the trailer and suffered a broken left leg.",1
An employee exited the cab of a crane and walked down the middle of the bed to the ladder. He lost his footing and fell from the bed to the ground.,1
"On July 22, 2020, at approximately 2:00 AM, an employee was preparing to wash down equipment. When he opened the door of the equipment, his left thumb was pinched against the power panel attached to the opposite wall, causing an injury that required surgical amputation of the distal portion of the thumb.",0
An employee was off-loading a windmill blade when his right index finger was caught in the rigging. He sustained an amputation to the right index finger near the nail.,0
An employee was hiking down steep rocky terrain when he twisted his right knee.,1
An employee was operating a mill creating taps and dyes and suffered a laceration to the left middle finger requiring surgery.,1
An employee collapsed while loading tools at the end of a shift. The employee was hospitalized for a heat injury.,1
"An employer was in back of the concrete mixer truck washing down the fins. A loader backed up and bumped into him, knocking him down. He sustained injury to both legs.",1
A gas pump attendant had an altercation with a customer and the customer hit the employee with their vehicle.  The employee sustained a fractured hip.,1
"An employee was changing a forklift's tire. The employee removed the lug nuts and had grabbed the sides of the tire to remove it. As the employee was rocking the tire, the forklift fell off the jack and pinned the employee's arm between it's fender and the tire. The employees arm was fractured and required surgery and hospitalization.",1
"Two temporary employees were installing a fence post. The post was driven down with a post driver; one employee's hand was on the post, and that employee suffered a severe laceration that resulted in the amputation of the right little finger.",0
When an employee reached for a falling ham both of the employee's forearms came in contact with the skinner machine and were lacerated.,1
An employee's right index finger got pinched in a file cabinet while moving it resulting in a partial amputation.,0
"A truck driver backed up to a door at a front dock. He alighted from the truck and proceeded to the dock area. He then engaged the dock plate lever, but the transition plate did not flip up. The driver then went into his truck, secured a strap, attached it to the lip of the dock plate and pulled back. He lost balance, slipped and fell back, using his right hand to break his fall. He sustained a fractured right wrist.",1
"An employee was cleaning out debris from a wood pellet mill. The employee's hand was pulled between the mill's die and roller; the employee suffered compression injuries to the left hand, with partial amputations to the left index and middle fingers.",1
"An employee was climbing an extension ladder to install plumbing test plugs on a second level. Once the employee had ascended to the top of the ladder, it collapsed and the employee fell to the ground below. The employee was hospitalized with spinal injuries and broken bones in his feet.",1
"While performing solar panel installation on a residential home, an employee fell from an extension ladder and sustained a broken foot.",1
"An employee fell off the edge of a deck, landing on the ground below and suffering left knee and chin lacerations, as well as a broken right wrist.",1
"An employee was working in the office when they stepped back, tripped over a bag that was on the floor, and fell. The employee sustained a dislocated hip requiring hospitalization.",1
"A road project was utilizing two excavator mounted drilling attachments, which have telescoping Kelly bars to make the drill bit go down into the ground. Two mechanics came out to inspect the Kelly bars. The injured mechanic was facing the excavator operator and signaled the operator to raise the boom, but the Kelly bar raised/collapsed instead. The injured mechanic’s right hand slipped into the inner and outer Kelly bars of the drill and the first, middle, and ring fingers were injured. The top of one of the fingers was surgically amputated.",1
"An employee was connecting a 90 psi, half-inch air hose to a bottle. The hose released from the tank and struck the employee in the neck, lacerating it. The employee was hospitalized.",1
"An employee and the owner were changing a tire on a yarder. The tire next to it exploded, breaking both of their ribs. The employee and the owner were hospitalized.",1
"On July 22, 2020, at approximately 12:15 PM, the injured employee had been removing a jammed bag from a packaging machine. A supervisor found the injured employee on the floor, unresponsive. The employee had been injured by the bag carriage device on the packer machine. He was hospitalized with head trauma, lacerations on the left eyebrow and back of the head, two broken ribs on the right side, and multiple fractures to the right side of the jaw requiring surgery.",1
"Within 15 minutes of being on the job, an employee became ill. He continued to work throughout the day, taking frequent rest breaks. The employee was having cramps on his left side throughout the day. After finishing the day, the employee went home and was later hospitalized with dehydration, suspected heat exhaustion, and acute kidney failure.",1
"While working on a rooftop unit, an employee's lanyard failed, resulting in the employee falling from the roof of a store and landing on the ground. He sustained broken vertebrae.",1
An employee who had been delivering mail was hospitalized with heat exhaustion and dehydration.,1
"An employee was removing a fabricated roll cage from a tractor using a 4 1/2-inch grinder with a metal cutoff wheel. The employee started cutting the weld. When the employee got to the end of the cut, the wheel hit the center between the tubing and kicked back, jerking the grinder from the employee's hands. The grinder lacerated the employee's hand.",1
"An employee was removing plastic debris from a saw when the blade contacted their left hand. At the time of the incident, the saw had been powered down, but the blade was still spinning. The employee's left ring, middle, and pinky fingers were crushed. The middle finger was amputated at the hospital.",0
"On July 23, 2020, a mechanic was conducting maintenance on piping in a boiler room. The employee’s leg started cramping in mid-morning. In the afternoon, after returning to work, the employee started cramping in the hands and foot. The employee was hospitalized for heat-related illness.",1
"An employee was detailing a yacht at a marina. The employee fell from the yacht to the marina's deck 5 feet below, breaking both his feet.",1
"An employee was preparing a house for gutter installation. The employee got off a ladder and stepped onto the porch roof to remove shingle strips. He then fell 9 to 10 feet off the roof, landing on the lawn and breaking his right femur.",1
"An employee was patching holes on a large refractory product. The product slipped off the working surface and fell on his leg, breaking it.",1
An employee sustained heat stress and dehydration while working on the rig.,1
"An employee was climbing a ladder to install internet. The ladder was set against a light pole which severed at the base and collapsed. The employee fell to the ground, sustaining a dislocated shoulder and a broken humerus. The employee was hospitalized.",1
An employee was watching a lint cleaner machine. He was cleaning cotton from the machine when it cut the top of his hand.,1
"An employee was on a work platform about 6 inches above the floor. The employee stepped back, lost footing, and fell backwards from the platform to the concrete floor. The employee was hospitalized with injuries to the left wrist.",1
An employee was closing a sanitation closet. The door cut the tip of the employee's middle finger.,1
"An employee was performing framing work on the first floor of a building and fell into an open stair hole, landing on the basement floor. The employee was hospitalized with a broken collarbone and a skull fracture.",1
"An employee was assisting with moving crane mats. When the excavator moved onto a crane mat, the mat shifted and the employee fell from the mat to the ground. He landed on his side on the flange of a steel beam that was laying on the ground. The employee sustained a laceration on his eyebrow and broken ribs.",1
"An employee was repairing pallets using a hammer, a pallet disassembly pry bar, and a pneumatic coil nailer. While he was placing a new board on a broken pallet, the coil nailer nailed his left middle finger to the board. He was hospitalized, undergoing surgery.",1
"While installing steel pan decking, an employee fell 10 to 12 feet off a bridge onto a paved parking lot. The employee suffered a skull fracture.",1
An employee was operating a forming press machine and amputated the tip of his right index finger.,0
An employee operating a rebar bending machine had his finger pinched between a piece of rebar and a fixed point on the rebar bending machine. The employee sustained a fingertip amputation without bone loss.,0
An employee was filling a cylinder with a mixture of CO2 and argon gas. The cylinder ruptured and the bottom of the cylinder fractured the employee's left leg.,1
"An employee was bending a part in a hydraulic press brake. The employee's right middle finger was pinched between the part and the machine (not at the point of operation), causing a partial fingertip amputation.",0
An employee slipped and fell on a wet floor resulting in a broken jaw and a concussion.,1
An employee was using a mixer during a production run when his right middle finger contacted a rotating screw. The employee sustained a fracture and partial amputation of the right middle finger.,0
A temporary employee received chemical burns during mixing operations.,1
"An employee was using a forklift to unload a trailer attached to the cab of a truck. The truck pulled away from the dock and the forklift fell toward the ground. The employee was injured in escaping from the forklift, and was hospitalized.",1
An employee was being trained to operate a dual pallet jack when the forward control actuated and the pallet jack crushed his right ankle against wall curbing. The employee sustained a fracture and lacerations to the right ankle.,1
"An employee had been surveying when they started feeling dehydrated. The employee left the job site, became ill, and was hospitalized for heat stress.",1
An employee was cleaning a racking system when a rack fell towards him and hit his leg. The employee sustained a broken right femur.,1
"On July 24, 2020, employees were taking a patient upstairs using a stair chair. One of the employees suffered a back muscle pull and a bulging disk. She was hospitalized.",1
After picking up trash around the work zone an employee was hospitalized for heat stress.,1
"An employee was installing wiring at a home. As he was coming down an 8-foot ladder, he fell. He landed on the ground and broke his right ankle.",1
"An employee was closing a gang box door. The door closed on the tip of the employee's right ring finger, amputating the tip (with no bone loss).",0
"On July 24, 2020, an employee was walking from the maintenance shop to the cardboard container recycling mill. When he arrived at the cardboard container recycling mill he slipped and fell on the concrete floor fracturing his left femur.",1
"On July 24, 2020, a maintenance technician was demolishing a 10-foot-high structure inside a manufacturing facility. He had removed the structure's plywood roof and was about to climb down a ladder when the fascia board collapsed and knocked him down. He fell about 10 feet, striking a table and the floor. He suffered a broken jaw and bruising to his face, shoulders, and thighs.",1
An employee was using steel tongs to attach a 15-foot metal rod to the existing drill rod string. The drill rod began rotating and the employee was stuck by the pipe tongs causing a left forearm fracture.,1
"An employee was removing personal equipment from the cab of a temporary tractor. He fell while stepping down from the tractor, landing on the ground and suffering two broken ribs and bleeding in a lung.",1
"An employee had been doing custom wiring installation. The employee had felt ill for three days. After finishing work on the third day, the employee was hospitalized for dehydration and kidney failure possibly due to heat exposure.",1
"While an employee was loading a board onto a chain, a saw blade lacerated his index, middle, and ring fingers.",1
An employee fell and hit his head while walking to his vehicle. The employee was hospitalized.,1
"While walking across a drain grate, an employee's foot went through the drain grate into hot waste water and was burned.",1
An employee was climbing to fix a transformer that was placed on a trailer when he slipped. His foot got wedged and his left leg was fractured above the knee and required surgery.,1
An employee tripped on a floor mat and fell fracturing her hip.,1
An employee was using a hand-held leaf blower to remove debris from a flat roof. The employee fell approximately 15 feet from the roof and sustained fractures to the wrist and leg.,1
"An employee was walking past a machine-operated press when it ejected material, which struck the employee and broke the employee's pelvis.",1
"An employee was on a portable ladder changing out a compressor for an air handler. The ladder slipped and the employee fell to the ground about 5 feet below, suffering a spinal fracture in the lower back.",1
"On July 24, 2020, an employee sustained lacerations to the fingers on their left hand.",1
An employee was working outside installing pipeline and doing directional drilling. The employee became dehydrated and was hospitalized.,1
"An employee was servicing a piece of rental equipment. While the employee was looking for a hydraulic leak, the employee's finger contacted the high-pressure leak and was lacerated by the hydraulic fluid. The employee was hospitalized.",1
"An employee was placing rubber mats on the ground to protect the concrete from the metal tracks on the curb machine. His right leg was caught and run over by the curb machine. The employee sustained an abrasion to the foot, dislocated toes, and swelling. He also required leg surgery.",1
An employee was handling a wire mail basket. Her finger was caught in the container while she was placing it on the counter resulting in an amputation to the left middle fingertip.,0
"An employee was working on a boom lift when the equipment started to slowly come down and the basket tilted sideways. As the employee tried to push the basket away from the wall his left hand got caught between the top rail of the basket and the wall resulting in fractures to the thumb, index, and middle fingers.",1
An employee was installing solar panels when they slipped and fell from the roof to the ground. The employee sustained a broken ankle.,1
"An employee was delivering mail. When she stepped off the delivery vehicle she misstepped and fell, resulting in a fractured right femur.",1
"An employee was performing maintenance on an 8,600-ton shear press. The employee was standing on a metal plate approximately 3.5 feet long by 1.5 feet wide. The metal plate had a weld fail which caused the plate to break and fall into a pit. The employee fell partially into the pit and sustained a fracture to the right femur.",1
"An employee was watching another employee use an AR-15 during a team-building exercise. A metal object (possibly a piece from the target) struck the employee, causing an arterial laceration.",1
"An employee was assembling cabinet frames. While using a table saw, the third and fourth fingers on his left hand were partially amputated.",0
"An employee was loading a coil on a press using a forklift with a boom, hook, and chain. The employee was struck on the right side by a forklift and fell to the ground. His right foot was pinned under the forklift resulting in amputation of the right leg just below the knee.",1
The injured employee had just completed a postal route and upon returning to the post office began displaying symptoms of heat-related illness. The employee was hospitalized.,1
"On July 25, 2020, a roofer was installing a 5:12-pitched roof on a new three-story apartment when he slipped and fell about 32 feet to the ground and landed on his back. He was hospitalized with spinal injuries and a punctured lung.",1
"An employee was mopping the floor. While carrying the mop, bucket, and a bottle down the stairs, she slipped on the fifth or sixth steps from the bottom. She fell backwards and hit the back of her head. She was hospitalized for a possible head injury.",1
"An employee was placing items into a jewelry safe. When the employee closed the safe door, her left thumb was crushed and partially amputated.",1
An employee was putting cash in a safe. The safe door crushed the employee's fingers.,1
"An employee was performing cleaning procedures prior to roofing installation on a three-story building. The employee removed a piece of plywood and then fell through a hatch, about 15 to 16 feet to the ground. He sustained a head laceration and left tibia fracture.",1
"An employee was filling a store order. While lifting a 40-pound bag of onions from a pallet, he tripped over shrink wrap that was attached to the pallet. The employee fell to the floor sustaining a swollen disk and lower back pain requiring hospitalization.",1
"An employee was troubleshooting limit switches using an electrical meter. One of the switches tripped and activated a magnet to retract, which caught his finger between the magnet and a switch bracket. His left pinky finger was partially amputated, below the first knuckle.",0
"On July 26, 2020, an employee received a call from a tenant that the elevator was not working at their rental house. The employee drove to the three-story rental house to fix the issue. While trying to reset the elevator, the employee lost her balance and fell about 30 feet through the sheet rock to the first floor of the elevator shaft. The employee was hospitalized with a back injury.",1
"An employee was using a circular saw to cut plywood for a scaffold. A board kicked back and the saw contacted the employee's hand, amputating the pinky finger.",1
"An employee was conducting a safety inspection of a semi-truck when he missed a step and fell off the truck, hitting his head on the floor.",1
"While surveying the plant, an employee tripped on a berm and fell to the ground. The employee was hospitalized with a laceration.",1
"An employee was placing dough in a tortilla machine line. The chain and sprocket conveyor inside the tortilla machine caught her left hand, causing an amputation to the left index finger.",0
"On July 26, 2020, an employee was checking can codes on a canning line. While retrieving a can, the employee's left middle finger was caught between the conveyor and a transfer plate and amputated.",0
"A postal employee was delivering mail in a post office letter carrier vehicle. The vehicle was equipped with a comfort fan but no air conditioning. At approximately 5:55 p.m. on July 27, 2020, the employee was found unresponsive inside his vehicle. The employee was hospitalized with a high temperature and a possible seizure. Heat stress/exhaustion is suspected.",1
An employee was ascending a portable extension ladder to access a piece of equipment. The employee lost their footing and fell approximately 8 feet to the ground below. The employee sustained fractures to the collar bone and ribs.,1
"An employee was repairing two dust collector systems under a shed in the back of the shop. The dust collector began to tip over and contacted the employee, causing a contusion and cuts to his face, as well as a possible broken bone in his face.",1
An employee fell 6 to 7 feet from an A-frame ladder to the ground and sustained possible rib fractures.,1
"An employee fell between a loading dock and a trailer, suffering a broken leg.",1
A Vivid Mechanical employee was removing couplings from a chilled water pipe (connected to a chiller). The pipe struck the employee in the face and knocked the employee over. The employee suffered a fracture and lacerations to the face and lacerations to the torso.,1
"Two employees were troubleshooting a lift table that was not functioning. When air flow to the table was turned on, the table tilted down quickly and an empty mold plan slammed into the guide rail. An employee's right index finger was smashed between the guide rail and the mold; the fingertip was amputated during treatment.",0
An employee was walking across the yard to assist a forklift operator by spotting for him. He missstepped and fell sideways to the ground. The employee was hospitalized with a broken left hip.,1
"On July 27, 2020, an employee was operating an end rider pallet jack and struck an elevated platform. The employee sustained a laceration to the left calf.",1
"An employee was performing repairs on a 15-foot high roof when he fell off, hitting his head on a traffic arm box while falling to the ground. He sustained a head injury.",1
An employee was lifting a patient when she suffered an abdominal injury that caused stomach pain and vomiting.,1
"An employee was walking on a concrete block wall near a trash compactor. The employee fell from the wall to the ground, suffering a broken rib, broken left wrist, and bleeding around the kidneys. The employee was hospitalized.",1
"After chocking the wheels of a rail car an employee stood up and felt dizzy. The employee then fell onto a concrete curb along the rail track. He sustained lacerations to the head and hand, a bruised sternum, and fractured ribs.",1
"An employee was working to clear a soda ash blockage that jammed the rotary feeder blades of a silo. Once the employee cleared the blockage, the rotary feeder blades rotated and amputated the second and third fingertips on the employee's left hand.",0
An employee was lifting a hydraulic cylinder onto a bench vise for repairs. The vice rotated and the employee's left thumb was caught in a fitting hole. Then the cylinder rotated and caught the employee's thumb against the vise amputating the fingertip.,0
"An employee was dropping a trailer and opening the doors. Upon opening the last door to the trailer, the employee passed out and fell from the back of the trailer to the ground. The employee was hospitalized with heat exhaustion and syncope.",1
An employee moved a small step stool under a stationary fan so he could reach the fan. The employee was repositioning the fan when his left hand slipped past the guard and contacted the metal fan blades. The first and third fingertips on his left hand were lacerated and the second fingertip was amputated.,0
"An employee was walking down a flight of stairs. His left leg buckled and he fell, suffering a broken left femur. He was hospitalized.",1
An employee's right index finger was amputated in a screw conveyor.,0
"During paving operations, an employee was releasing a hose at the hot plant to clear out the line, when hot oil sprayed out onto the employee. The employee sustained burns to the arms requiring hospitalization.",1
"While walking toward the time clock, an employee tripped over a parts pan that was on the floor, injuring his knee.",1
"An employee was placing a 55-gallon drum on a pallet. The employee's finger was smashed between two of the drums, causing an amputation.",0
An employee was cutting pork loins with a bandsaw. The sawblade amputated the employee's left little finger at the first knuckle.,0
"An employee was on the ledge of a piece of fryer equipment, changing the vent filters above the hood. Her right foot slipped into the hot oil, and she suffered third-degree burns to the calf, ankle, and foot.",1
"An employee fell while walking up stairs, suffering broken bones.",1
"An employee fell from a roof, injuring his ankle and elbow.",1
"An employee was investigating a noise in an HVAC duct-system. He located a suspect auxiliary blower unit, deenergized it, and then went to retrieve tools. He returned to the blower after approximately 10 minutes. The fan/belt/pulley were slowly rotating even though power had been isolated. The employee removed a cover so he could press a tool against the belt to bring the blower to a stop. While reaching for the tool, his hand slipped into the pulley/belt resulting in an amputation to the right index finger from the base of the nail to the end of the finger. Also, the top third of the right middle finger was degloved.",0
An employee was operating a bench disk sander. The sander amputated the tip of the employee's ring finger.,0
An employee was carrying a 36-inch by 60-inch sheet of paper and stepped on the paper which caused him to trip and fall. The employee braced his fall with his elbow and sustained a fracture to the left humerus.,1
While servicing an auger head an employee sustained an amputation.,1
An employee was filling up a small engine with gas. A fire started and burned the employee's legs and hand.,1
"An employee was overseeing the process of emptying a condensation pit into a relief pit. While observing a pump, hot steam from a condensation tank leaked out onto the employee resulting in first and second degree burns to their back, the backside of both arms, and the backside of both legs.",1
"Two employees were fixing a commercial washing machine. As the drum was being manually spun to bring a broken airline into view, the injured employee's left middle finger became caught in the pulley system resulting in amputation of the fingertip.",1
"On July 28, 2020, a technician was investigating a lack of cooling in the HVAC system of a building. He determined there was a refrigerant leak. While showing his supervisor what had been found, the technician opened a 3-phase, 208-volt junction box and sustained electric shock and burns to his hands, resulting in hospitalization.",1
"An employee was using a forklift to move a triple-stacked pallet of drums containing chemicals. An expandable concrete joint hit the pallet, causing the material to shift. One drum was punctured and sprayed chemical onto the employee's entire body.",1
"An employee was making a delivery on his regular route. After retrieving a package from the package car, the employee was closing the bulkhead door of the delivery truck when his right pinky finger got caught in the door. The fingertip was amputated.",0
"An employee was unloading porcelain panels (5' x 10') from an A-frame storage unit. When he cut the tension straps, the panels collapsed on him resulting in fractures to both legs.",1
"An employee was walking a 100-pound-plus dog. The dog lunged forward and the employee fell, suffering a broken right femur and a broken right wrist.",1
"On July 28, 2020, an employee was moving a piece of steel on his workbench. The steel shifted and struck him in the face, lacerating his cheek.",1
"On July 28, 2020, an employee was doing housekeeping at the end of his shift. As he walked across the work area after emptying a trash can, he slipped in oil and fell, suffering a left ankle injury that required hospitalization and surgery.",1
An employee was walking down the stairs near the loading dock when they fell and broke a bone in their left foot.,1
"An employee had left the store to get supplies for the shop from a business next door. On his way back to the bay area of the store in a heavy rain, the employee lost his footing on the wet and slippery ground and fell. The right side of the employee's head hit the ground and he was unconscious for about a minute. The employee was hospitalized.",1
An employee was removing a hydraulic access panel while doing maintenance on an excavator. The panel swung back and crushed the employee's hand against the excavator's track. The employee's left index finger was amputated.,0
An employee was on top of a fuel truck filling it up when the fueling arm swung around and knocked him to the ground. The employee was hospitalized with fractures to the ribs and pelvis.,1
"An employee was driving a forklift, loading and unloading tires from a trailer. The forklift slipped on water on the floor, and the employee's left leg was crushed.",1
While unloading steel an employee sustained a crushing injury to their foot.,1
"An employee was cooking a batch of lubricating grease. Flames and grease slurry came out of the grease cooking kettle and splashed onto the employee; this also started a fire outside the kettle. The grease/oil slurry was approximately 185-200 degrees and caused second degree burns to the employee's face, neck, arms and hands.",1
Two employees were moving the hood of a car. One of the employees sustained a back strain and fell to the ground.,1
"Two employees were removing interior metal liner wall panels two at a time, leaning them against the wall, and then lowering them to the ground to be stacked. Each panel is 3' wide x 18' 6"" long, and weighs approximately 30 to 35 pounds. Two panels were leaning against the wall. The employees  lowered the first panel to the floor and were about to stack it, when the second panel fell and hit the injured employee’s hard hat and cut his nose and cheek. The injured employee was hospitalized.",1
An employee was using a polishing cloth to clean aluminum tubes after they were cut by the automatic circular saw. As the employee was moving aluminum tubing down the finishing table air that was blowing from a fan flipped a corner of the polishing cloth that was in his hand under the saw guard. The saw then pulled in the cloth and the employee's right index finger was amputated.,1
"An employee was placing personal protective equipment into a storage cabinet. She slipped and fell backwards, hitting her head on a cabinet as she fell. She suffered a laceration to the back of the head.",1
"An employee was working on a flaker assembly line. As he was moving a unit, it fell from his hands and its stainless steel edges lacerated his chin and his arm. He was hospitalized, requiring surgery.",1
"A crew was working on a single-phase re-conductor project. The digger truck, which was pulling the four-drum puller trailer, had been driven into position to start pulling ropes on a section of line. The puller was at a 90-degree angle to the digger truck to align the drums with the existing poles. The puller then needed to be repositioned. An employee used two safety chains to connect the puller to the winch line from the digger. He then winched up so he could disconnect the puller from the back of the digger truck. At this point the puller disconnected from the hitch and rolled forward on sloped ground, pinning the employee between the digger truck and the puller. He sustained injury to the pelvis and back.",1
"An employee was moving a sick steer. The steer hit the employee with its head, knocking the employee into a steel fence. The employee suffered bruises, fractures to the left shoulder blade and ribs on both sides, and upper torso swelling.",1
A temporary employee was operating a leak tester machine when the clamping cylinder caught her left middle finger in the point of operation. The fingertip was amputated.,1
"On July 28, 2020, while helping the driver of a truck to back in an employee was pinned between the reversing truck and a stationary trailer. He sustained an abdominal hematoma.",1
"An employee was unloading a heater and a tool belt from the company truck. The employee felt ill, so he started walking back to his vehicle but passed out in the elevator of the parking garage, hitting a handrail as he fell. He was hospitalized with a laceration on the head, a bruised rib, and heat exhaustion.",1
An employee was using a knife to prepare food in the kitchen when the knife slipped and partially amputated his thumb tip.,0
"An employee was lifting a heavy box to throw it into a dumpster. His hand was crushed between the box and dumpster, causing a severe laceration.",1
An employee was climbing down a ladder on a flatbed truck and jumped from the second rung. The employee landed on the ground and suffered a broken leg.,1
"An employee was cutting wood on a table saw. The employee reached for a piece of wood to cut; the sawblade caught the wood and the employee's hand was pulled into the blade. The employee's left index, middle, and ring fingers were amputated, along with the tip of the thumb.",1
"An employee was lubricating the lift cylinder of a powered industrial truck. When grease lubricant was injected, it came out of a crack in the truck's grease hose and perforated the skin of the employee's right palm. The employee was hospitalized.",1
"Employees were putting an electrical panel back together after repairing it. An arc flash occurred that burned an employee's left arm, hands, and eyes.",1
"An employee was climbing a scaffold ladder on a metal wall. When the ladder slid off, the employee fell and was impacted by the ladder, sustaining a broken left arm requiring surgery.",1
"An employee was delivering mail. While stepping out of their vehicle, the employee's ankle twisted and fractured.",1
"On July 29, 2020, an employee was working on a pump on a water ride. As he was descending a ladder down a rock formation to go into a concrete channel to work on the pump, he tripped and fell approximately 16 feet into the channel, which had been drained of water. The employee's injuries included fractures and dislocations.",1
While cleaning a deli slicer an employee sustained a possible fingertip amputation.,0
"A fuel truck had just been freed after being stuck in sand. The driver left the truck and unhooked it. While he was between the two trucks, the fuel truck rolled forward, pinning him between the two trucks. He suffered a broken pelvis and a possible vertebral injury.",1
An employee had been working outside and carrying a silt fence and experienced symptoms of heat stress. The employee was hospitalized.,1
An employee was removing cheese curd from a plugged line when the rotating star valve amputated approximately 3/4-inch of his right index fingertip.,0
"An employee tripped and fell, suffering a broken left hip.",1
While connecting a purlin an employee fell from the boom lift.,1
An employee working from a step ladder fell backwards and fractured a hip.,1
"An employee fell while walking security rounds, suffering a knee injury and left-side numbness.",1
"After working on a computer server, an employee was replacing a steel beam guard. The beam dropped on his right ring finger causing a partial amputation to the fingertip without bone loss.",0
An employee was climbing from a ladder onto a residential roof to inspect it when he slipped off the roof and fell to the ground below. The employee's spine was broken.,1
"An employee's foot caught a photo eye on a conveyor. He fell, his face striking an electrical box mounted on a hydraulic unit. He suffered a broken bone in the face, a lost tooth, and a facial laceration.",1
Two employees were pushing a multi-tiered material handling cart that weighed approximately 363 pounds. The cart rolled over the foot and ankle of one of the employees. The injured employee sustained lacerations to the ankle and chipped bone.,1
An employee was cleaning before closing the department for the night. The employee fell on the floor and sustained a fractured right elbow.,1
"An employee drank from an unlabeled water bottle sitting next to another employee's water bottle. The bottle the employee drank from contained solvent. The employee began vomiting, then felt better, but began coughing up blood the next morning and was hospitalized.",1
"An employee fell while entering a truck trailer, striking the parking lot surface and a curb and suffering a head injury and a broken leg.",1
An employee was pulling product through a machine. The employee's hand was crushed when the puller cycled. The machine was not guarded or locked out/tagged out at the time.,1
"An employee was walking into the building through the vestibule entrance. A driver reversed out of a space in the parking lot and struck the employee, sending her through the frame/glass between the entrance and exit doors. The employee sustained broken ribs, a broken elbow, a broken thigh bone, multiple lacerations, and internal bleeding.",1
An employee was working as an apprentice operator on a shop bottle forming machine and was hospitalized due to heat stress/dehydration.,1
"An employee was pushing the head unit on an automated cable-wrapping machine along its roller bar tracks. The employee's right hand was caught between the head unit and a support mount on the roller bar tracks, causing a partial amputation to the little finger.",0
An employee's fingers were caught in a meat grinder; three fingers were amputated.,1
"An employee was running a controls and equipment test on a chiller. One of the pumps started up, causing a spark. The employee was burned.",1
"A maintenance employee was removing a level control valve when he was sprayed with Hexamethylenediamine (HMD). The contents of the pipe were under pressure and the liquid was hot, but less than 100 degrees Celsius. The employee sustained chemical burns and possibly thermal burns to his face and back.",1
"An employee was placing a case of vegetables onto the bottom shelf of a cart. As she stood up, her head hit the cart's top shelf, resulting in a scalp contusion.",1
"While lifting a 55-pound mold in a molding oven room, an employee briefly lost consciousness.",1
"An employee was watching the flow of product in a meal load sampler. The automatic sampler in the machine struck the employee's left arm, causing a break that required hospitalization and surgery.",1
"On July 30, 2020, an employee became overheated and was hospitalized, suffering from dehydration.",1
"Employees were replacing a double circuit pole. When one phase of a 3-phase, 200V-power line was energized, it went straight to ground, causing an arc flash. An employee sustained second degree burns to the face and upper left arm.",1
An employee was found unconscious on the dock floor with possible heat stroke.,1
An employee was adjusting a dock plate in order to unload a truck. The employee's finger was pinched between the dock plate and the truck resulting in a partial amputation.,0
"An employee was walking out of a facility when he slipped on a piece of plastic and fell to the ground, breaking his left leg below the knee. He was hospitalized.",1
"While taking her lunch break, an employee was exposed to another person's vaping, triggering a severe asthma attack that resulted in hospitalization.",1
"An employee was running an excavator with a grapple magnet. The magnet swung back and hit the cab and power box, and the employee was shocked.",1
"An employee was using a dolly to transport seven cases of product through a doorway. He fell; the cart also fell, striking his right hand and amputating the tips of his middle and ring fingers.",1
An employee was operating a hydraulic press brake when his right index fingertip was amputated by the machine.,0
"At 4:30 p.m., after delivering mail from a van, an employee developed heat stress and was hospitalized.",1
The injured employee was watching another employee operate a machine when the saw table returned home and crushed his finger resulting in a severe laceration and partial amputation.,1
"Two employees were using a gantry crane to flip a dock (approximately 45 feet long by 4 feet wide) from pontoons side up to pontoons side down. While the dock was at an approximately 45-degree angle, with the pontoons facing down, the injured employee began lowering the dock to the floor using the gantry crane’s pendant. He then saw an issue and began to lift the dock back up, to roll the dock backwards and position it vertically. At this point, the rigging slipped out of the gantry crane’s hook. When the injured employee began to lower the dock again, the dock fell on top of him, crushing his left ankle and fracturing his right femur.",1
An employee's right hand was burned in a pan containing hot fry oil.,1
An employee had been caulking while on an 8-foot ladder. The employee lost balance/footing while descending the ladder and jumped from the ladder. The employee impacted the floor and sustained a lower leg fracture requiring hospitalization and surgery.,1
An employee was operating an excavator to excavate coal combustion residual (CCR) from below ground to create a sump. The sump was being excavated to a lower elevation to allow water to be collected at the bottom and pumped into a ditch. The surface material the excavator was placed on set down vertically approximately 6 to 8 feet. The employee then jumped off the excavator and landed on the ground resulting in a fractured left tibia.,1
"An employee was transferring food into a cooler from a rack that was on a pallet jack. The employee was moving the pallet jack so the rack would be closer to the cooler. While getting off the pallet jack, the employee became caught between the pallet jack and the cooler. His right ankle was fractured.",1
"An employee was walking between a transformer and wall-mounted, lead-jacketed secondary cable. His right shoulder brushed against the cable and his left elbow touched the transformer bracket, causing an arc flash. He suffered first- and second-degree burns to the left arm and the left chest area.",1
"An employee was using a demo saw to cut pipe. The saw kicked back, striking him in the face and breaking his nose and cheekbone.",1
"An employee was helping install a loader storage bin. While hoisting the bin up, it slipped off, causing a laceration to the employee's left thumb that required surgery.",1
An employee had been tack-welding boundary bars for insulation on the deck. The employee experienced severe cramps and was hospitalized for dehydration and an acute kidney injury.,1
"An employee was fixing a conveyor belt. The middle roller on the adjacent belt caught his right hand and burned the hand, wrist, and back of the hand.",1
An employee was operating a skid steer. The skid steer shifted and the employee's fingers were caught in its hinged door. The employee suffered a finger avulsion.,1
"An employee had been standing and giving a presentation. When finished, he went to sit down in a chair but the chair rolled out from under him. The employee fell to the floor, sustained a left hip injury, and was hospitalized.",1
An employee was descending a ladder that was against an electrical pole when the pole broke at the base. The employee landed on the ground and sustained a broken pelvis.,1
An employee was pulling out a winch line when his fingers were pinched between the winch cable and the housing of the winch. The middle and index fingertips were surgically amputated.,0
"On July 30, 2020, at approximately 10:30 AM, a temporary employee was operating a rotary molder and adding dough in the rollers. The employee came in contact with the knife on the rollers resulting in a partial amputation to the right thumb.",1
"A pallet jack crashed into an angle iron, pinning an employee. The employee suffered a broken right tibia and fibula.",1
An employee was collecting shopping carts in a parking lot. The employee fell to the ground and suffered a broken right arm.,1
"An employee was unloading a piece of equipment from the lift gate of a truck. The equipment fell on the employee, causing broken ribs, a lacerated liver, and a torn aorta.",1
An employee had a severe allergic reaction to some citrus fruit that another employee had brought to the lunchroom. The employee was hospitalized.,1
"An employee was operating a hydrovac when a hose burst in it, cutting the employee's right bicep.",1
An employee was using a dynamic cone penetrometer (DCP) tester when his left ring fingertip got caught between the weight and the top of the tool. The fingertip was crushed.,0
An employee was taking a sample of molten metal when a piece of slag contacted the tongue of his boot. The employee was hospitalized with burns to his leg.,1
An employee's finger got caught in the door of the company truck. The left index fingertip was amputated.,0
An employee was operating a brake press. The press activated and severed four fingers on the employee's right hand.,0
"After finishing a double shift, an employee became ill while waiting in a parking lot. He was hospitalized, suffering from dehydration.",1
"During hurricane clean up, an employee fell through a trash chute on the third floor. The employee landed on the ground and sustained a fracture to the second lumbar vertebra.",1
"An employee was changing a bit on a hammering gun when the gun actuated, causing an amputation to the employee's little finger.",0
An employee had chest pain after chasing a patient who was attempting to leave the unit.,1
"An employee was operating a brake press to flatten a part. The employee reached down to straighten the part, when the pedal was pushed and the machine actuated, resulting in amputation of the right middle, ring, and little fingers at the distal joint.",0
An employee was operating a pallet rider when his foot slipped off the vehicle and it lacerated his foot near the ankle. He was hospitalized.,1
An employee was operating a radial arm saw and amputated the tip of his left thumb.,0
"An employee was on top of a condo, moving an 800-pound sandblasting machine on its two wheels. The pot tilted over and landed on his leg. He suffered a broken tibia and fibula and was hospitalized.",1
"An employee was using a wire stripping machine. The machine caught his glove and pulled in his hand. He suffered lacerations to his index and middle fingers and his thumb (which was split down the middle), as well as a broken bone.",1
"An employee was using a forklift to empty trash into a dumpster. He fell to the ground, suffering a head laceration, cracked ribs, and a punctured lung. He was hospitalized.",1
"An employee was moving material from a loading dock to the seventh-floor level via hoist. He became dizzy, began to sweat heavily, and could not stand. He was hospitalized, suffering from dehydration and an elevated heart rate possibly due to heat exposure.",1
An employee working on a milling machine placed a round bushing into the fixture-activated pneumatic hold-down. The clamp came down and partially amputated her left index finger.,0
"An employee was frying chicken when hot grease spilled from the pan. The employee slipped and fell into the hot grease, burning both legs and both forearms.",1
"On July 31, 2020, a groundsman was using a hammer to drive a steel pile into the groove of a driving machine when the hammer hit his left index finger causing a fracture. He was hospitalized.",1
"On July 31, 2020, an employee's hand was crushed in a swing load rigged to a crane, after the load tightened during a lift. The employee suffered crushed fingertips, resulting in an amputation.",0
An employee fell 4 feet off a bakers scaffold and was hospitalized for fractured ribs.,1
"On August 1, 2020, an employee was delivering mail when he developed heat exhaustion, suffering from muscle cramps and difficulty walking. He was hospitalized.",1
"On August 1, 2020, an employee missed the last step while descending from an A-frame ladder and fell to the floor, resulting in a fractured right heel.",1
"An employee had just placed some timbers on a pipe stack. As he was moving away, a 16-inch by 10-foot pipe that was being stacked rolled onto the timbers past the intended placement. This caused the timbers to catapult over the pipe. One of the two timbers struck the employee on the right side as it was coming down, knocking him to the ground. He suffered fractures to the right wrist, nose, face, and skull on the right side. He was hospitalized.",1
"An employee tripped and fell while walking, suffering a fracture in their left arm.",1
"An employee was assisting an ATV and a forklift in pulling wire. The ATV slid into a 3-foot trench where the employee was standing, trapping them between the ATV and the ground. The employee sustained a dislocated right shoulder and a damaged L1 vertebrae.",1
"An employee was cleaning filters when he lost consciousness and fell to the ground, striking his head. He was hospitalized.",1
"A census employee was leaving the home of a census respondent when the employee fell down the stairs, resulting in a fractured hip.",1
"An employee fell while walking down a flight of stairs, landing on the concrete floor below. The employee suffered a broken arm.",1
An employee was cleaning a conveyor belt when the conveyor belt was turned on and crushed her left hand and wrist. The employee sustained a fractured left wrist that required surgery.,1
An employee was working as a go-kart track attendant. Several of the carts collided and stopped; the employee was resolving the situation when another cart drove into his right foot. He suffered two broken toes and a laceration and was hospitalized.,1
An employee was spooling new wire into a road mesh machine when his hand got caught in part of the machine and the reverse button on the machine was pressed. The employee suffered a fingertip amputation.,0
"An employee was under a disabled vehicle that had been raised on a flatbed truck. The vehicle rolled off the bed of the truck and its tire landed on the employee's right forearm, causing multiple fractures.",1
"A security guard was escorting a patient to the restroom when the patient attacked him, causing facial bone fractures.",1
"An employee slipped on a wet floor and struck the back of their head on the floor, resulting in hospitalization.",1
"A Census Bureau employee was delivering census packets. He lost consciousness while approaching a home, fell, and struck his face on the ground. He was hospitalized, suffering from heat exhaustion and facial abrasions.",1
An employee was pulling out a pipe from a furnace when the mechanism that he was using malfunctioned and caused a part to break and hit the employee. The employee suffered a forehead laceration.,1
A pump coupling failed and caused objects to fly in the air and strike an employee. The employee received two lacerations to the inner left thigh.,1
A border patrol agent became dehydrated while tracking in the brush.,1
An employee was training sea lions when one of them bit the employee's upper right thigh. The employee was hospitalized.,1
"On August 3, 2020, at approximately 9:27 a.m., an employee suffered a partial amputation of the left arm while cleaning a meat grinder.",0
"On August 3, 2020, an employee was descending a metal staircase and fell three steps from the bottom. The employee fell against the step or hand rail and injured their abdomen. The employee suffered a lacerated spleen.",1
"A one-ton pallet of material fell, striking and pinning an employee. The employee suffered fractures and cuts/abrasions.",1
"An employee was drilling a support column when a metal shaving caught his glove and pulled his fingers around the drill bit. The drill bit amputated the tip of his left middle finger, damaged the tendon on his ring finger, and bruised his thumb, index finger, and pinky finger.",1
"An employee was cutting the edge off a 2-by-4 using a handheld circular saw. The guard caught and the saw cut the employee's left thumb, breaking a metacarpal and causing arterial bleeding.",1
"An employee was guiding in a 150-pound section of bar grading that was being hoisted by a crane. The grading pinned his arm against a steel I-beam, breaking the forearm. He was hospitalized and underwent surgery.",1
An employee was cutting lumber on a table saw. The sawblade amputated part of the employee's left index finger.,0
A forklift collision broke an employee's heel and ankle.,1
"While closing the door to his terminal tractor with his right hand, a maintenance employee's left index finger slipped in-between the door and the door frame, resulting in a partial fingertip amputation.",0
"A recycling driver had emptied a recycling bin and was taking it back to a residence. A vehicle struck the employee, resulting in a broken leg and arm.",1
"An employee was taking out trash when he fell to the pavement, suffering a compound fracture to the left arm. He was hospitalized and underwent surgery.",1
"A rock climbing guide fell while rappelling down a wall, landing on the ground about 20-30 feet below and breaking both wrists.",1
The injured employee was assisting an extruder line operator when the synthetic fibers wound tightly around his left thumb and amputated it.,1
A temporary employee was operating a horizontal band saw when his hand got caught in the vice that held the piece to be cut. The employee was hospitalized for a muscular injury and swelling in their hand.,1
"An employee was walking out of her office when she fell to floor, fracturing her left kneecap.",1
"An employee was transferring products from a pallet to a non-motorized conveyor belt. While walking around the pallet, she tripped on one of its corners and fell to the ground, breaking her lower left leg.",1
An employee attempted to unclog the rotary valve of a dryer when he suffered a partial amputation of his left index finger.,0
"An employee slipped and fell in an office hallway, landing on the tile floor, and suffering a broken kneecap.",1
"An employee was using a crow bar to attach a metal drag bar (10 feet long, weighing 400 pounds) to the bucket of a front end loader. The employee's hand was caught between the bottom of the drag bar and the ground, causing a partial amputation to the right index finger.",0
"An employee set down his personal bag containing a gun and it accidentally discharged, striking another employee in the lower leg.",1
"An employee was crushing boxes in a bailer. The door came down and crushed the employee's right index finger, causing a partial amputation.",0
An employee was operating a center-rider pallet truck when his right foot came into contact with a piece of wood from a broken pallet. He suffered an avulsion to the middle of the foot and was hospitalized.,1
"An employee working on an extension ladder fell off the ladder after the ladder slipped. The employee suffered a broken left wrist, broken tail bone, and damage to their back.",1
"Trusses fell from a cart, breaking a temporary employee's pelvis.",1
An employee tripped over a shopping cart and fractured their back.,1
"On August 1, 2020, a foundry employee was cleaning a sand muller prior to changing out the liners. The employee stepped on the wheel when in the muller, slipped, and fell causing the wheel to turn. His leg was caught in the 1 1/2-inch gap between the wheel and the wall of the muller. He was hospitalized, suffering from a muscle injury.",1
"An employee was loading chicken crates. One of the crates hung up, and while the employee was getting it loose he fell from a platform to the ground 6 feet below. He suffered a head injury and was hospitalized.",1
An employee was performing housekeeping duties when they backed into a ball valve causing steam to release. The employee sustained second degree burns to their back.,1
A painter was picking up an airless spray gun and suffered an injection wound to the left index finger.,1
A driver was connecting a dolly to their truck when the tip of their left little finger was amputated.,1
An employee suffered two pulled chest muscles while moving heavy pieces of wood onto the forks of a forklift. The employee was hospitalized.,1
"An employee was climbing a portable extension ladder to get onto a scaffold platform. The ladder fell away, and he fell to the floor about 11 feet below and suffered broken vertebrae.",1
"An employee was installing a cylinder on the applicator boom of an agricultural sprayer when the cylinder slipped and struck the employee in the head and shoulder, leading to a contusion.",1
"An employee was loading a coil that weighed 1,368 lbs. into the feeder for the press using a forklift. The coil was turned the wrong way, so the employee lowered the coil onto the ground so that it was standing up. The employee attempted to turn the coil manually so he could pick it back up with the forklift and in the process of turning it fell on the employee's left leg. The employee was hospitalized for a compound fracture of the left leg.",1
An employee fell while changing a flat truck tire and their fingers got caught between the truck's fender and the tire. The employee suffered a partial amputation.,1
"An employee was picking cases in a four-deep pallet location with two pallets left in it. As the employee was taking two cases off one of the pallets, their weight pulled the employee off the second level of the modular line. The employee landed on the floor and suffered a broken right wrist.",1
"On August 4, 2020, a machine operator was bending thin aluminum tread plate parts on a press brake when the tip of his right index finger got caught between the part and the bottom die. The employee suffered the amputation of half of his fingernail to his fingertip.",0
"An employee was pulling a plate clamp out from under a 1,600-pound stainless steel plate above a plasma table. The plate slipped out and pinched his finger against one of the slats on the plasma table. His fingertip was medically amputated at the first knuckle.",0
"On August 4, 2020, an employee was installing a French drain when his muscles started to cramp. He was hospitalized due low electrolytes.",1
"An employee was hospitalized for a heart attack, possibly related to heat stress.",1
"A driver was climbing from the top of a trailer when his heel caught on the trailer, causing him to fall backward to the ground onto gravel. He sustained fractured ribs, a head contusion, and a sore back with bruises and scrapes.",1
"An employee was opening a package of seafood with a box knife. The knife cut the employee's left thumb, resulting in the amputation of the tip.",0
"An employee became dizzy and nauseated and lost consciousness. He was hospitalized, suffering from kidney failure due heat-related illness.",1
"On August 4, 2020, at approximately 4:20 PM, an employee was walking outside between work stations in extreme heat. The employee had his duty gear on and was carrying a backpack with first responder gear when he collapsed. The employee had a heart attack and was hospitalized.",1
An employee was cleaning a sidehook machine. The machine's arm came down and pressed the employee's hand into a recessed area for a mandrel. The hand was crushed and the employee underwent bone reduction surgery to the little finger.,1
An employee was attempting to move a conveyor when her left middle finger slipped into a channel behind a pneumatic slide on the side of the conveyor. The device activated and amputated the fingertip.,0
"An employee was setting up a small tube-sheet. A 3-foot plastic block slipped from underneath the tube-sheet, causing the tube-sheet to fall on the employee's right little finger. The employee suffered a soft-tissue amputation to the fingertip.",0
"An employee was walking to a customer's vehicle to deliver a curbside order. She tripped on a crack in the sidewalk and fell to the ground, suffering a broken leg.",1
"An employee was conducting maintenance on a natural gas glycol dehydration unit when the housing unit ruptured and hot glycol fluid made contact with the employee, leading to hospitalization for third degree burns on top of the head, neck, and back.",1
A temporary employee was operating an electric pallet jack when his foot was caught between the pallet jack and the wall resulting in injury to the left ankle.,1
"A Johnson Controls employee was working on a rooftop HVAC unit. A gust of wind blew the unit's door closed on his right middle finger, amputating the fingertip.",1
"A vehicle struck an employee while she was walking across a parking lot, breaking her right shoulder and her tibia.",1
"An employee was moving glass jars when a jar broke. A piece of broken glass cut the employee's right wrist, resulting in hospitalization and surgery.",1
"An employee was cutting the concrete surface in a parking garage. He fell through the resulting opening to the lower level, suffering minor bruises and contusions on the concrete floor.",1
"An employee tripped and fell in the office parking lot while attempting to remove a case of sodas from her car. The case of sodas fell on her right leg and foot, fracturing both.",1
An employee slipped and fell to the ground while walking towards the entrance to the worksite. She sustained a broken hip.,1
"An employee was moving a sheet of plywood. The plywood fell onto a drive plate, which then struck the top of his foot and broke it.",1
An employee was working in a dishwashing area when she slipped and fell. Her right ankle was caught under a pole and was broken and dislocated. She was hospitalized.,1
"An employee was walking down a hallway when he tripped and fell, suffering a broken hip.",1
"An employee was lifting a large roll. The roll released and dropped on his right little finger, resulting in an amputation.",0
"Five employees were unloading sign structures using a crane. The crane tilted over and the structure fell onto an employee, smashing his right foot.",1
"On August 4, 2020, a roofer fell about 12 feet from a ladder to the ground while preparing to climb onto a roof and suffered a broken femur.",1
"While at a construction site, an employee fell from a scaffold's side bracket platform that was approximately 7'4"" off the concrete flooring, sustaining fractures to their skull, arms, and wrist, as well as a laceration to the skull.",1
An employee was lifting a cable off the floor when he felt pain in his abdomen. The employee was hospitalized.,1
"On August 4, 2020, an employee was installing a satellite dish at a customer's home. He fell off his ladder to the ground 20 feet below, suffering three broken vertebrae and a head injury. He was hospitalized.",1
"An employee fell while descending an aerial lift platform that was approximately 17 inches from the ground. The employee hit the ground, fracturing his hip and requiring hospitalization.",1
"An employee fell approximately 18-20 feet from a second story door while removing and discarding old HVAC duct work. The employee was hospitalized with a broken right arm and foot, and also received staples to close a laceration on his head.",1
An employee fell while delivering mail on a city carrier route. The employee suffered a knee injury.,1
"An employee was opening a hatch to check liquid sulfur draining into a pit. The liquid sulfur splashed onto the employee's hand and face, causing chemical burns.",1
"An employee was servicing a crane. The employee's right index finger was stuck in a pinch point, and the fingertip was amputated.",1
An employee was taking pressure readings on a hull when his right foot fell into the hull opening where grating had been removed. The employee was hospitalized with broken ribs and torn tissue in his knee.,1
"An employee was replacing forks on a forklift when the forks crushed his ring finger, causing a partial amputation to the fingertip.",0
"An employee was stepping from a secured pipe on a trailer deck when he fell to the ground, leading to right-side distal tibia and fibular fractures.",1
"An employee collapsed and fell, striking his head on the concrete floor.",1
"As a hopper was being moved over a concrete form, it caught an employee's right middle and ring fingers against the form. The two fingertips were amputated.",0
"An employee was walking down stairs when she slipped. Her ankle struck the edge of a concrete step, causing a burst Achilles tendon. She was hospitalized and underwent surgery.",1
Employees were cutting and torching metal scraps. A metal object fell onto an employee causing multiple fractures to the ribs and spine.,1
An employee was trimming shrubbery and fell approximately 4-5 feet from a ladder/wall before landing on concrete. He was hospitalized with a broken arm.,1
An employee was standing on a dock when a dock plate shifted. The employee's right foot was caught between the curb stop and the rear end of a forklift. The employee suffered a degloving to the right ankle.,1
"On August 5, 2020, a service provider completing a delivery began to feel light headed and nauseous. He was hospitalized for dehydration.",1
An employee was cutting wood on a straight line rip saw when a piece of the scrap wood was ejected from the cutting area and impaled the employee's upper left leg.,1
"An employee was struck by a boulder while working to extinguish a fire, causing the employee to fall approximately 20 feet down a hill. The employee suffered a skull fracture and lacerations.",1
"An employee came into contact with a battery backup wire while replacing a light fixture. He fell off his ladder to the floor, suffering a head injury.",1
"On August 5, 2020, an employee slipped and fell while walking down a spiral staircase, suffering a ruptured right patella tendon. The employee was hospitalized.",1
"An employee was using a piece of I-beam to pound out a piece of scrap metal from a mandrel when his hand got caught between the I-beam and the scrap metal, leading to a cut and a smashed hand.",1
A landscaping employee suffered cramps and dehydration due to a heat-related illness.,1
" An employee was providing care to a patient when the patient kicked the employee in the chest, knocking her to the floor and breaking a hip.",1
"An employee was operating a stand-up forklift. During a turn in an aisle, her torso struck against racking and she suffered fractures. She was hospitalized.",1
An employee was turning on a standing forklift when his left leg struck a shelving unit. He suffered a broken ankle.,1
"An employee was clearing debris from the pin hole while setting up an auger into a shaft. The shaft and auger then fell into place and pinched his right middle finger. The employee suffered a fingertip amputation, just above the nailbed.",0
"An employee was standing on the roof performing masonry wall repairs when he fell 10 feet from the edge to the ground and suffered a broken jaw and arm, requiring hospitalization.",1
An employee fell onto pavement while loading parts into a van for delivery.,1
"A can punch was activated and caught the tips of two fingers on an employee's left hand, leading to the amputation of the smallest phalanges on each finger.",0
"An employee was operating a manlift onto a levee dock ramp when the manlift began to slide down the levee for about 15 feet. The tires caught on the levee and the manlift flipped over sideways, causing the employee to land outside of the manlift basket. The employee was hospitalized with a broken leg.",1
"An employee was standing on an antistatic mat when they tripped and fell onto the concrete floor, leading to hospitalization for a dislocated hip.",1
An employee was replacing a water line in a 7-foot deep trench. The trench caved-in and the employee was caught in the dislodged soil. The employee sustained bruises.,1
"An employee was operating an excavator. While extending the tracks, the excavator tipped over and landed on top of an employee's left foot. The impact ripped the leather of his steel toed boots just above the steel and resulted in broken toes.",1
"An operator was attempting to retrieve a part from a furnace loader when his shoe got caught in a cable, causing him to fall onto his side from a height of about 1 foot. The employee was hospitalized with a fractured hip.",1
An employee amputated the tips of two fingers using a circular saw.,0
"An employee was standing on a 3-foot 6-inch platform. The platform collapsed and the employee fell to the floor, suffering a broken tibia. The employee was hospitalized and underwent surgery.",1
A go kart ride attendant was walking in the pit area. A kart struck the employee and caused a laceration to their foot.,1
"An employee fell from the top step of a rubber-tired front-end loader. His back hit the fender, causing him to flip and land on the ground on his head. He suffered a head contusion and a broken left wrist.",1
"An employee was using a router to complete the assembly of a picnic table for staff use when his finger got caught in the blade, resulting in amputation of a left-hand fingertip.",0
"An employee was walking on conveyors when another employee removed a roller from the conveyor. The employee stepped where there was no roller and fell, cutting his arm on the centering device.",1
"An employee was moving an air compressor trailer by hand when it impacted the back of a vehicle. The employee's left hand was pinched between the air compressor trailer and the vehicle's hitch, resulting in a fracture above his wrist.",1
"An employee was grinding meat when the machine jammed. The employee cleared the machine and retracted her hand when the sleeve of her smock got caught and triggered the clicker, causing the blade to come down. The employee suffered an amputation of their left ring, middle, and index fingers.",0
"Two employees were lowering a large roll using a hoist. One employee's hand was caught between the roll's steel core and a storage rack, causing a thumb injury with exposed tissue.",1
"An employee was handling a pressurized water hose to clean a large culvert pipe when the hose slipped from his hands and began to flail around, striking the employee approximately four times. The employee was hospitalized with an abdominal injury.",1
"An employee was checking the voltage on the power source to a chipper motor. The meter blew up, causing an arc flash that burned the employee's neck, face, and hands.",1
"An employee was performing routine maintenance on a running bottle conveyor when the rag she was holding got pulled into the conveyor, injuring her left hand and causing a partial amputation of the left thumb. The employee was hospitalized.",1
"An employee was cutting ribeye steaks on a band saw when he suffered a laceration on his right index finger, leading to hospitalization.",1
"An employee was wiping grease off a machine with a paper towel. The towel got caught in the machine, pulling his hand in and partially amputating his right ring finger.",1
"On August 5, 2020, an employee was cutting metal pieces on an automatic saw. The machine stopped running; after he got it running again, his left middle finger was caught by its belt. The fingertip was amputated.",0
"On August 5, 2020, a cemetery landscaper was mowing a slope when the mower got out of control and the employee let go. The mower slid down the hill, struck a headstone, and bounced toward the employee, landing on his leg and causing two factures in his tibia.",1
"An employee was climbing out of a trench when the bucket of a trackhoe struck the employee's hand, crushing it between the edge of the bucket and the surface of a road. The employee suffered a partial fingertip amputation of the left ring finger.",0
"An employee was driving a utility vehicle when it tipped over, leading to hospitalization and fractures in his wrist and ankle.",1
"An employee slipped while descending a ladder and fell, landing on the ladder and then on the floor about 5 feet below. The employee suffered a compound fracture of the left ankle, a left shoulder dislocation, and a broken nose.",1
An employee was clearing a clog in a dust collector. The rotary drive paddles caused a partial amputation of the employee's left index and middle fingers.,1
"An employee was preparing a concrete pump to fill a concrete truck hopper when the employee was struck by the concrete truck, resulting in a crushed pelvis.",1
"An employee fell off of a moving garbage truck, hitting the ground and sustaining a head injury.",1
An employee was placing brush into a disc chipper while trimming trees. The employee tripped and fell backward into the brush and was pulled into the disc chipper. The employee was hospitalized for severe lacerations and cuts to the left shoulder.,1
An employee was cleaning a conveyor belt when his left hand/glove was caught by the conveyor and his arm was pulled into the conveyor/sprocket. The employee sustained multiple fractures to the left forearm.,1
"An employee fell while descending concrete stairs, resulting in a contusion and fractures to the back and center of his head.",1
An employee broke their teeth on the railing of a boom lift while attempting to navigate the lift onto a curb.,1
"An employee lost consciousness while dismounting a forklift, fell, and struck his head on the concrete floor. He was hospitalized and required stitches to the forehead.",1
"An employee was driving a forklift through a door. The mast on the forklift struck the door header. The employee was ejected from the forklift, struck the floor, and suffered a broken left elbow.",1
"An employee was climbing a step ladder when the ladder was kicked out from underneath him, causing him to fall and hit the right side of his head on the ground below.",1
"While inspecting completed railroad wheels, a railroad wheel fell on an employee's legs and knocked him over. The employee suffered a compound fracture in his left ankle, broken metatarsals in his right foot, and an injury to his right ankle.",1
"An employee was trying to mount the rear riding step on a residential trash truck. The employee missed the step and the truck tire rolled over the employee's foot, causing a laceration and possible broken bones.",1
"While conducting molding of plastic tubing, an employee's index finger got caught in a hydraulic cold press, resulting in a cut fingernail and a laceration to the fingertip.",1
"An employee entered a hopper with an auger in the floor to tighten screws on the inside of the hopper. While in the hopper, the auger turned on and caught the employee's feet. The employee was hospitalized for right foot fractures.",1
An employee became faint and dizzy while painting in an apartment. He was hospitalized.,1
"An employee was scanning his badge at the card reader to open a gate when he fell from his vehicle and was run over by a truck, leading to internal injuries to his spleen and kidney. The employee was hospitalized and had surgery for his injuries.",1
"An employee was mowing the grass when the mower slid into a drainage ditch and landed on top of them. The employee suffered amputated fingers on the right hand (3rd, 4th, 5th fingers) and a portion of the palm, leading to hospitalization and surgery.",1
An employee was closing a vehicle's tailgate. The employee's right little finger was caught in the latch mechanism and was partially amputated.,0
Two spotters and an operator were offloading excavators from a vessel using a crane when an excavator that was suspended in the air struck and pinned one of the spotters against the vessel. The spotter suffered broken ribs and a punctured lung.,1
An employee was pulling out pipe from over his head when his left bicep tore.,1
"A mail carrier was bitten by two dogs, suffering a hand injury.",1
"An employee was at a repair station, filling lumber on the bottom shelf of a lumber rack. Another employee placed a nail gun on the bottom shelf of a nearby table, and the gun fired a nail into the first employee's upper back on the left side.",1
"An employee was using a forklift to move materials on pallets. He got off the forklift when its forks became stuck in the crates. As he was trying to move the forks, a tine fell onto his finger, causing the amputation of the fingertip.",0
"An employee set up a 24-foot extension ladder to 12 feet. When he climbed the ladder, it twisted and collapsed causing the employee to fall and fracture his ankle.",1
"An employee fell while exiting a piece of cargo handling equipment, landing on the ground about 15 feet below. The employee suffered a broken knee, femur, tailbone, and pelvis.",1
"An employee was using a drill to replace the screws on the dead front panel of a 600-volt disconnect box. A screw penetrated the insulation of an energized wire, causing an arc flash that burned the employee's arms and hands.",1
An employee was taping carpet on the metal roll of a roll forming machine when both of the employee's hands were pulled between the rolls. The employee was hospitalized for broken bones and multiple finger amputations on both hands.,1
"An employee was cleaning a rip saw when his right pinky finger got caught on the blade, resulting in amputation.",0
"Two employees were securing a tarp to a dump trailer. The tailgate smashed one employee's left little finger, causing an amputation of the fingertip.",1
"While unloading boxes that contained hunting stands from a shipping container, an employee collapsed and lost consciousness. He was hospitalized, suffering from heat exhaustion.",1
An employee had a heart attack while testing a transformer and removing the lines.,1
An employee was preparing to remove copper lines from an old compressor using an oxygen and acetylene welding torch. Flames came out as soon as the torch was turned on and the employee was burned on their face and arm. The employee was hospitalized.,1
An employee was painting parking lot lines and became dehydrated. The employee was later hospitalized with a heat-related illness.,1
An employee tripped and fell over an empty box that was next to a trash can. Her right elbow was shattered and required surgery.,1
An employee had been driving a skid steer loader on the job site. Both of his feet were fractured by the loader's bucket. The employee was hospitalized.,1
A temporary employee was operating a press. The press cycled and his left index finger was caught in the die. The finger was partially amputated.,0
An employee disengaged a shaft cylinder and in the process severely pinched her right index finger between the shaft and the shaft collar.,1
"An employee was sitting on the seat of a forklift when he stuck his arm through the mast of his forklift to scan freight. The cord from his scan gun caught the lever to move the mast up and down, causing the mast to retract and come down on his right arm. As a result, he suffered a right arm amputation.",1
"On August 7, 2020, at approximately 2:38 AM, two security guards were conducting an exterior patrol of a bus station. The guards directed a person to leave the property for failing to provide a valid ticket. The person then stood up and hit one of the guards on the left side of the face/neck with a metal pole. An altercation ensued; the assailant then pulled out a knife and began striking the injured guard in the left forearm and right hand. The injured guard sustained lacerations to the arm, hand, and neck.",1
"An employee was walking and tripped on the floor's transition strip. The employee fell to the ground and hit their head/face, suffering a concussion.",1
"An employee was performing maintenance on a lock/latch mechanism when their pinky finger got caught between the piston and the rail of the machine, resulting in amputation of the pinky finger from the knuckle up.",1
"On August 7, 2020, an employee was pulling on a pie tin that was caught under a kick-off arm. The employee's left middle finger was pinched between the kick-off arm and the pie plate, and the fingertip was amputated.",0
"An employee was stepping through a metal rack when the rack lacerated the employee's leg, requiring hospitalization.",1
"An employee was working on a 6-foot Baker scaffold when the walk board collapsed. He fell to the concrete floor about 4 feet below, suffering a broken ankle that required surgery.",1
An employee delivering mail on a route was attacked by a dog from the property.,1
An employee was parking a reach truck when the employee's foot was caught between the reach truck they were operating and a second reach truck. The employee suffered a left foot fracture.,1
"An assembler was using a cordless drill with a 3/8"" bit to drill through a fiberglass reinforced panel on a truck when the drill bit went through the steel wall of the truck cab and grabbed onto his glove. The right index fingertip was amputated.",0
"An employee was in the bucket of a truck making repairs to an electrical power system. He was shocked while using a drill to make a ""hot tap,"" receiving an electrical burn on his left index finger.",1
An employee fell seven to eight feet off a scaffold onto the ground and suffered a concussion and contusions and abrasions to his arms.,1
"On August 7, 2020, a paramedic/EMT was bitten on the right hand by an insect in the course of several ambulance calls. She was hospitalized the next day for infection.",1
"An employee was spraying down drip-pan equipment with foam chlorine when she fell off the third rung of a 6-foot A-frame ladder and landed on her left knee. The employee suffered fractures to her left leg, femur, tibia, and knee.",1
"An employee was struck in the face with a golf club while walking behind a golfer, leading to hospitalization.",1
"An employee fell while stepping off a bus, suffering a broken hip. The employee was hospitalized.",1
"An employee was working as a helper on a resaw line when a cant became skewed on the live roller deck, causing the cant to stop moving. The employee stepped onto the deck and corrected the alignment of the cant. He turned and was stepping down when he slipped, causing him to fall onto his right hip/leg. He fractured his right femur, requiring hospitalization and surgery.",1
"While driving a forklift to be parked, an employee got caught between the forklift and an automated forklift, leading to two broken legs.",1
An employee was using a band saw to cut a beef shank when the shank became displaced after contacting the saw blade. The blade then amputated the employee's left middle finger.,0
"An employee fell off a ladder while servicing an alarm system and hit the ground, resulting in an injured arm and femur.",1
"A work crew was moving concrete barriers along a traffic lane using an excavator with a barrier lifter. The excavator's boom contacted a 19.9-kilovolt overhead power line, and an employee was shocked. The employee suffered burns to the right hand and right foot.",1
"An employee fell off a moving golf cart to the ground, suffering a head injury that required hospitalization.",1
"An employee fell while descending steps outside a residence, suffering contusions to the forehead, right wrist, and both knees. The contusion to the forehead resulted in internal bleeding on the brain.",1
An employee was operating a yard hostler and moving a container to be loaded onto a ship. He became disoriented and drove the yard hostler into a parked forklift and then into a privately owned vehicle that was also parked. The employee was hospitalized with dehydration.,1
An employee fell off a ladder and suffered a leg injury.,1
An employee was walking to re-rack a product when he fell and had a seizure that may have been heat-related.,1
An employee was preparing a choke sling for piping when the excavator rotated and struck the employee. The employee suffered rib fractures and internal bleeding.,1
An employee was adjusting a misaligned pallet on a conveyor system. The pallet return lift station rose up and pinched the employee's forearms against the frame of the machine. She suffered bruises and contusions on both forearms.,1
"Four employees were transporting cleaning chemicals when there was a spill and/or chemical reaction when the chemicals mixed. One of the employees was hospitalized, suffering from difficulty breathing, shortness of breath, and lightheadedness.",1
"An employee was boiling water to cook oatmeal. Boiling water spilled down the employee's front, causing burns to the abdominal area and the left foot and toes.",1
"An employee was about 8 feet up an extension ladder when he fell, striking the handrail and then the landing of a stairwell. He suffered broken ribs on the right side, as well as internal bleeding.",1
"An employee swung a sledge hammer to hit a hammer union. The sledge hammer missed and caused the employee to lose balance and fall approximately 3 feet, hitting his back on a mud pump module and suction pipe. The employee sustained fractures to the L2, L3, and L4 vertebrae.",1
"An employee was in a kitchen, helping prepare dinner for group home residents. An aggressive patient entered the kitchen with a rock and struck the employee with the rock and his fists, then took the employee's frying pan and struck her in the head with it. She fell to the ground and the resident continued to strike her. She was hospitalized, suffering from bruising to the face and body and general soreness.",1
"An employee was driving a forklift when he collided with another forklift at an intersection. His left foot was smashed between the two forklifts, resulting in an amputation injury to his left foot.",0
"An employee was stepping down from a three-step top stock cart and missed the last step, falling to the floor. She was hospitalized with a fractured left hip.",1
"An employee was grinding a concrete panel with a 4-inch grinder. The top of the panel broke and fell to the ground, landing on his left foot and breaking all five toes.",1
"An employee was attempting to clean a running conveyor belt when his hand was pulled into the roller, resulting in a broken wrist.",1
An employee was assaulted by two customers while operating a ride and suffered a broken jaw.,1
"An employee was opening a valve on an acid prep tank. The pipe fitting was loose and acid sprayed the employee, burning the employee's upper body.",1
An employee was using a machine to change a tire when his thumb got caught in the machine as it mechanically lowered to break the tire bead from the rim. The employee suffered an amputation of the tip of his left them.,1
An employee was cleaning a crimper machine when the machine amputated his left index fingertip.,0
An employee was walking to his work station when he slipped on air conditioner condensate on the floor. He fell and fractured his right leg.,1
"An employee was trying to pull a winch hook out on a tilt trailer. The winch was activated, partially amputating one of the employee's fingers.",0
An employee was trying to dislodge scrap from the exit end of a scrap chute. The scrap chopper in the chute amputated the tip of his left ring finger above the first knuckle.,0
"On August 10, 2020, at approximately 1:30 a.m., an employee fell to the floor while loading a mail container. The employee's foot became caught in the strip of the container and the employee sustained a fractured right hip.",1
"An employee began experiencing leg cramps while working in a trench. The cramps worsened and the employee was hospitalized, suffering from heat stress/dehydration.",1
"An employee was operating a reach truck when the safety flags fell between the operator's compartment and mast. The employee attempted to grab the flags and hit the controller while doing so. The mast lowered, trapping his right arm in the machine. He was hospitalized with a degloved arm.",1
"An employee was spray-painting the ceiling and upper walls of a dock area. He was working from a heavy-duty plastic utility storage bin/box placed on the forks of a forklift. The box shifted, tossing him to the concrete floor about 9 feet below. He suffered broken ribs.",1
"An employee was running a labeler on a bottling line when there was a glue build up on the labeler. The employee began cleaning it with a rag, when the rag got pulled into the machine and the employee suffered a partial amputation of their right index finger.",1
An employee was loading his truck when he fainted and was hospitalized for dehydration.,1
"An employee was in a bucket truck in the raised position to perform power line repairs. While removing some foliage from the power lines, the employee was shocked by the power lines, and sustained burns to both hands.",1
"An employee was opening a swing door on a tractor trailer. The wind pushed the door back, and it struck the employee's head and shoulder. The employee was hospitalized, having suffered a head injury requiring stitches as well as a broken right arm.",1
"On August 10, 2020, a plumber was cutting copper pipe with an angle grinder while working from a ladder when the angle grinder wheel became stuck in the pipe. He tried to dislodge the grinder by pulling on it and fell from ladder, sustaining a cut on his right forearm and leading to hospitalization and surgery.",1
An employee was traveling through an airport to return home when he fell down some stairs and landed on concrete. He lost consciousness and was hospitalized due to a concussion and brain bleed.,1
An employee was punched in the head while stopped at a traffic light. The employee lost consciousness.,1
"On August 10, 2020, an employee was removing tools from a press. He was using his right hand to operate the hoist chain while his left hand was on the eye bolt. When he pulled the hoist chain, it created tension on the eye bolt as it picked up the load. His left index finger was then crushed between the eye bolt and the spinner, resulting in a finger amputation.",0
An employee tripped over a computer cord and struck her head against a countertop. She suffered head lacerations.,1
"Two employees were felling a de-limbed, live tree. They attached a rope to the tree to help control the direction of fall and ensure nothing fell toward the road. As the tree was falling, it went off course and the two employees went separate ways. One of the employees went into the path of the falling tree, which hit the left side of his back and hip area. He broke his left femur, lumbar spine, left hip, and left leg.",1
"An employee hit his left hand while closing a trailer roll-up door, fracturing his ring finger and requiring stitches on his left middle finger.",1
"At about 9:00 a.m. on August 10, 2020, an employee was using a table saw to rip a piece of hardwood flooring when the wood kicked back and the employee's left hand was pulled into the blade. The employee suffered partial amputations to three fingers on the left hand.",0
"On August 10, 2020, an employee was changing out pins and dies on a pill press machine when the machine was actuated and a pin came down onto his finger. The employee was hospitalized with a partial amputation of his right pinky finger. The feed tray was not installed in the machine at the time of the incident.",0
"An employee was backing up a stand-up forklift. The forklift's mast struck a 900-pound bundle of aluminum channel overhead, causing it to fall from a rack onto the employee's right hand. He suffered a laceration and a fracture to his right index finger.",1
"An employee opened a T-handle valve on a tanker truck. The running pump caused the valve to slam shut on the employee's left ring finger, amputating the tip.",0
A temporary employee's glove was caught by a roller. The employee sustained injury to their right ring and pinky fingers resulting in amputation and hospitalization.,1
"An employee was kneeling on a platform. He stood up, then fell off the platform to the ground 7 feet 10 inches below, suffering broken ribs.",1
"An employee was cutting a piece of plywood on a table saw. His left hand came into contact with the sawblade, which partially amputated the first and second fingers.",0
A saw blade lacerated the top of an employee's right hand.,1
"An employee was changing the film on a machine when the employee's left middle and index fingers were pinched between the heating plate and die box, resulting in fingertip amputations.",0
"An employee was lining up a piece of product to cut using an upcut saw when the foot pedal was engaged while the employee's thumb was still on the product, leading to an amputation of the left thumb.",1
"While installing sheetrock in a closet, an employee received a electric shock to the right shoulder and left hand from a 110-volt temporary light. The employee was hospitalized.",1
An employee was climbing a ladder when a gust of wind caused the ladder to break free of its tie. The employee fell with the ladder and suffered a broken finger and elbow.,1
An employee was cleaning up the job site and suffered heat exhaustion.,1
An employee was working on the driveline of a semi-truck when the driveline shaft fell onto their fingers. Two fingers were amputated.,0
"An employee working as a scaffold helper was tasked with handing material to the scaffold workers. At the end of his shift, the employee felt ill and became unresponsive. The employee was hospitalized with swelling in his brain and elevated body temperature.",1
"An employee lost her footing while pulling on a door knob, fell, and hit her head on the ground. She was hospitalized with a brain bleed.",1
Employees were utilizing boom trucks to transfer live power lines to a new pole. One of the employees reached out to another to grab a tool while simultaneously holding the power line and experienced an electric shock. The injured employee was hospitalized.,1
An employee was shocked on the finger/hand while plugging a machine into a wall outlet.,1
"While performing an inspection on hydraulic lines, an employee lost footing on an uneven surface and fell to the ground, hitting their ribs on a solid metal object. The employee's ribs were fractured.",1
"An employee was walking up steps when a handrail gave way, causing the employee to fall forward onto the steps. He suffered an injury to the left elbow and a broken left forearm and right wrist.",1
A census taker was attacked by a dog at a private residence. The census taker fell to the ground and suffered two broken thumbs.,1
"An employee was walking with an armful of bottled product. The employee tripped over an ankle-high fan cord and fell to the concrete floor, suffering head injuries.",1
"An employee had climbed a 6-foot A-frame ladder that was leaned up against a baler machine and was going to use pressurized air to clear debris off the electronic eye. The baler activated and the blade swept, amputating a portion of the employee’s left index finger.",0
"An employee was removing a defective piece of pipe from a bundle of 40 to 60 pipes about 20 feet long and was mounted on a metal cart. When the defective pipe came loose, it pushed back, pinching the employee's right ring finger against the cart. The employee sustained a laceration that resulted in surgical amputation of the fingertip.",0
"On August 11, 2020, an employee was working in a textile mill operating a fabric line in the pre-shear department. The fabric was beginning to curl under prior to entering the shear. The employee attempted to uncurl the fabric and contacted the spinning shear blade resulting in amputation of their left index and middle fingers above the first joint. The shear blade was not guarded at the time.",0
"An employee tripped over a cart while walking into the meat cooler and fell to the floor. The employee sustained fractures to the nose and jaw, and broken teeth.",1
"An employee fell through a ceiling at a demolition site, suffering hand lacerations.",1
"An employee was conducting interviews and handing out booklets to residents. As she was walking down a driveway, she stepped into a two-foot hole and suffered a broken left ankle.",1
A truck was pulled over while an employee had one foot in the truck and the other foot on a dock. The employee fell.,1
"An employee was driving a counterbalance forklift. His left foot struck an object outside the forklift platform, and he suffered three broken toes.",1
"An employee was repairing a primary jumper. The employee was shocked, suffering a burn on the hand as well as a fractured back vertebra.",1
An employee was installing floor sheathing on the second floor of a residential structure and fell through an opening in the floor to the basement level. The employee sustained multiple fractures and a collapsed lung.,1
"An employee was delivering propane to a customer when the tank released propane gas into his face. As well as propane inhalation, he suffered minor facial burns and contusions where the tank cap struck his face.",1
"An employee was riding a lawn mower while cutting the grass when the lawn mower slid down a bank and flipped into a lake, leading to hospitalization.",1
An employee was conducting log out operations on the plate ridge trail when the employee was struck by a falling log resulting in left arm bruising.,1
An employee was repairing the bed of a dump truck when the eyelet that was holding the gate broke. The gate released and crushed the employee's right arm.,1
"An employee was assisting with moving cargo that was blocking the path at a customer's location. The customer was driving a forklift to move a pallet. While positioning cargo with a strap, the pallet shifted and the employee's fingers were caught between the strap and the pallet. Two fingertips were amputated.",0
An employee fell from a ladder while removing stock from a shelf. The employee suffered a broken left leg.,1
"On August 12, 2020, a mechanic was lubricating the boom cable of a crawler crane and caught his right hand between the cable and the sheave resulting in the amputation of his right middle, index and pinky fingers. He was hospitalized.",0
An employee was cleaning a paving machine. He was on the machine's conveyor belt when it actuated. He fell onto the conveyor belt and fractured the L1 vertebra.,1
"An employee was changing the plunger on a press and adding bolts to the side of the plunger. When the employee lowered the lazy Susan, the plunger fell and one of the bolts punctured the employee's right hand, causing an open fracture. The employee was hospitalized, requiring surgery.",1
"An employee was on an extension ladder, using a hammer drill to drill into a concrete block. The employee fell to the floor, breaking both feet and suffering a head laceration.",1
"An employee was descending the ladder of an elevated cargo loader when he slipped and fell, landing on the ground about 10 feet below. He suffered head and back injuries including fractured vertebrae, an acute subdural hematoma, and an intraparenchymal hematoma of the brain.",1
"While walking down a set of stairs that had four steps, an employee missed a step and slid down the stairs, catching his leg between the upper and lower hand rail. The employee's knee twisted, tearing a thigh muscle.",1
"An employee developed heat stress symptoms after delivering packages. The employee was hospitalized, suffering from dehydration.",1
An employee was using a ladder to access to the attic of a residential home. The employee fell off the ladder onto the ground and fractured his left femur.,1
"An employee had been dismantling a scaffold when he experienced stomach cramps. He was monitored for approximately 45 minutes while in an air conditioned environment and his stomach cramps improved. After work, he was hospitalized with dehydration/heat stress.",1
An employee fell from a ladder and injured both feet and his back.,1
"On August 12, 2020, an employee was walking at a construction site when his foot fell into a hole and he tripped. He landed on a piece of metal, suffering a broken femur.",1
An employee lifting a loaded trailer of sulfuric acid sustained chemical burns on his back after coming into contact with sulfuric acid that had leaked from the trailer.,1
An employee fell to the floor while trying to break up a fight between patients. The employee suffered a fracture to the lower back.,1
An employee was working in the fields chopping bushes and developed muscle cramps. The employee was hospitalized for a muscle injury and heat exhaustion.,1
An employee sustained a fractured hip while attending to a fallen tree.,1
An employee was investigating a jam when his left index fingertip was amputated inside a silo.,0
"On August 12, 2020, a roofer was installing dry-in materials on the roof when he slipped and fell off of the roof onto the ground. He suffered cracked vertebrae and was hospitalized.",1
"An employee was on a 10-foot A-frame portable step ladder positioned in front of a forklift. The forklift mast moved forward and knocked the employee off the ladder. He fell to the floor about 7 to 8 feet below, suffering a broken ankle (which required surgery) and an elbow injury.",1
"On August 12, 2020, an employee was walking out of an office, turned, tripped over a resident's feet, and fell. The employee was for a fractured right shoulder and knee that required surgery.",1
An employee was moving and stacking commercial truck tire rims. His finger got pinched between two rims causing an amputation of the employee's left middle fingertip.,0
An employee was delivering a bag of groceries to a customer and slipped and fell in the parking lot. The employee sustained a lower leg fracture.,1
"On 8/12/2020, an employee was meeting with a juvenile around 2030 hours. The juvenile became aggressive and the employee attempted to restrain them. The juvenile assaulted the employee, resulting in the employee's head hitting a chair. The employee was knocked unconscious and the juvenile continued to assault him. The employee was hospitalized with a skull fracture.",1
An employee was loosening bolts with a wrench. The wrench slipped and cut the employee's fingertip.,0
An employee was attaching an extension chute to the back of a concrete mixer truck. The employee's left index finger was partially amputated in a pinch point between the chute and the truck.,0
A forklift operator's hand was crushed when a box of metal valves fell onto it.,1
"An employee was handling a rare-earth magnet. The magnet was attracted to a metal plate, and the employee's fingertip was amputated between the two.",0
"A power crew was picking up wood poles. A sling released and a pole fell, hit the ground, and bounced back. It struck an employee in the left leg, breaking it. The employee was hospitalized.",1
"An employee was walking in a hallway when she slipped on some residual salad dressing. She fell to the floor, landing on her right knee and suffering a broken right kneecap that required surgery.",1
"On August 12, 2020, an employee was troubleshooting tracking issues with the belt on a belt wrapper. The belt and a roller pulled in the employee's left hand and forearm; the employee suffered a wrist/forearm fracture.",1
"An employee was burned by hot liquid polymer, released as he took a nozzle out of a drain. He suffered second- and third-degree burns.",1
"At about 11:30 p.m. on August 12, 2020, an employee was working on a truck with his penlight in his mouth. The penlight was jammed backwards into his throat, puncturing the back of his throat. He was hospitalized later that night, suffering from internal bleeding in the throat.",1
An employee was lifting a 5-pound tray of pasta off a cart when she developed a hernia. She was hospitalized.,1
"An employee was checking a butterfly valve after cleaning it. The valve pinched his finger, amputating the tip with no bone or nail loss.",0
"An employee was unloading glass. The employee's hand was caught in a pinch point on a pallet jack, causing the amputation of a fingertip.",0
A temporary employee passed out while flagging traffic at a road construction project. He sustained a heat related illness.,1
A temporary employee was attempting to place an empty bin under a shredder. The bin was not in alignment so two co-workers pushed the bin forward while the injured employee guided it through. The injured employee's right thumb was pinched between the bin and the shredder frame. The employee was hospitalized for an open fracture of the right thumb.,1
"An employee was placing a work piece on a female die section. The press was activated and the male die section came down on the employee's right middle and ring fingertips, crushing them. Each fingertip was amputated at the first joint.",0
An employee was testing equipment and suffered heat exhaustion.,1
An employee was on scaffolding installing trim on the edge of a roof. The employee fell off the scaffolding onto the ground and suffered a fractured skull and a fractured back.,1
An employee developed heat exhaustion while placing bricks and mesh so a concrete slab could be poured.,1
The injured employee was riding on the back of a hostler truck (yard mule). The injured employee fell off the truck and was struck by the back wheels. The employee was hospitalized for a broken ankle and a blood clot in the hip area.,1
"At around 4:45 p.m. on August 13, 2020, an employee had just parked a rubber tire gantry and was climbing down from it. He slipped and fell from the fourth rung to the ground, suffering a broken leg and a possible broken tibia and fibula.",1
"An employee was inspecting a conveyor belt to make sure it was clean. It caught his arm, breaking and lacerating it.",1
"An employee was conducting maintenance on a molding tool when it kicked out, causing a partial amputation to the employee's finger.",0
An employee fell from a scooter and suffered a right tibial plateau fracture with damage to the knee joint. The employee also suffered abrasions on the left elbow and left ankle pain.,1
"An employee was sorting pallets at a pallet sorting machine. The machine's cushion arm returned to the ""up"" position, and the employee's left middle finger was caught between the cushion arm and a roller. The finger was partially amputated.",1
"A service technician was tasked with moving equipment. As he was moving a carrier basket from a pallet, the equipment fell and crushed his right index finger. The employee was taken to the hospital where the tip of his right index finger was amputated.",0
"An employee was spotting a forklift as it moved a 11,642-pound steel shaft. The shaft moved, and when the forklift tines were raised it was knocked off its wooden end supports. It rolled over onto the employee's foot, crushing the top and middle parts of the foot. The foot was amputated just below the ankle.",1
"On August 13, 2020, an employee was removing a filter screen from a washer machine. While the employee's right ring finger was between the screen and the filter housing, the edge of the filter screen struck it and amputated the fingertip.",0
An employee was picking up a dropped part near a drill press when the press caught and lacerated the employee's right ring finger.,1
"On August 13, 2020, an employee was demonstrating an issue involving a loose chain on the socket of the label machine. The chain grabbed the employee's right gloved hand and pulled it into the socket resulting in a finger amputation.",0
"An employee was testing the drive belt on an oilfield pump. The pump was started, and the belt partially amputated the employee's right thumb.",1
An employee was standing on stairs that were being held by welds and chain falls. The welds broke and the employee fell approximately 15 feet onto the concrete floor. The stairs fell on top of him. He was hospitalized with multiple fractures.,1
An employee was taking a piece of product off the skinner and stumbled forward. The employee's fourth finger on the right hand contacted the skinner's blade and the fingertip was amputated.,0
An employee working as a rigger began work at approximately 7:00 AM and was assisting another worker at ground level to rig pieces of precast concrete. He began feeling ill at the start of the day and was later hospitalized with dehydration.,1
"At 1:30 p.m. on August 14, 2020, an employee was shoveling dirt along the edge of a concrete curb into the path of a road grader. The road grader's wheel struck the employee from behind, causing a crushed foot, ankle, and lower leg. The employee was hospitalized.",1
"On August 13, 2020, the employee was repairing a leak on an aluminum tanker truck that previously hauled gasoline and diesel fuel. The employee was welding the cracked area when an explosion occurred within the confined space of the tanker. The force from the explosion caused the front head of the tank to blow out toward the victim. The victim was crushed in the rear of the tank and lost consciousness. The employee was hospitalized for traumatic brain injuries, broken ribs and a broken collarbone.",1
"An employee was grinding/welding inside a tanker truck tank. An explosion blew out the aluminum head and it struck the employee, knocking the employee unconscious and causing a broken collarbone, broken ribs, and brain swelling.",1
"An employee was working atop a horizontal whaler (steel I-beam) within a coffer cell approximately 12 feet from ground level. The employee was tied off to a cable lifeline above. When the crane hoisted the rigging out of the cell, one of the rigging hooks caught the whaler and broke the welds. This caused the whaler and the employee to fall. The employee struck the top of a concrete pile during the fall and sustained a fracture to his right acetabular bone (hip).",1
"An employee was operating an angle grinder, cleaning a metal surface on a cart. The wire wheel caught a large burr, kicked back, and caught the employee's shirt. It wrapped up in the loose material and lacerated the employee's left wrist/forearm. The employee was hospitalized.",1
"An employee was carrying an electric motor that weighed 35lbs. and had to use four sets of stairs to reach the area where the motor was to be installed. After coming down the third set of steps, he was on a flat surface when he tripped over an air wand hose that was on the ground. The motor he was carrying came down on his right ring finger, causing an amputation of the soft tissue of the right ring fingertip.",1
"An employee was mounting a tire. The tire machine robot arm's head was pressing against the edge of the lip of the wheel; it then slipped off the wheel and down onto the tire, pinching the employee's right little finger against the tire rim. The finger was amputated.",1
"While pushing a test weight onto the belt loader, an employee's finger got caught between the hand extension and the loader's pillar resulting in a right index fingertip amputation.",1
"While loading a roller, an employee fell from a lowboy trailer to the ground and broke his wrist.",1
An employee was laying metal decking on a metal building about 15 feet high. The employee fell off the leading edge to the ground.,1
An employee was observing a power press when her hand was caught in a conveyor belt and was fractured.,1
"An employee was doing an inventory check. He stepped onto an L-cart to check the second shelf, then fell to the concrete floor and struck his head. He suffered a brain bleed and lost consciousness.",1
"While relocating his fall protection anchor, an employee slipped and fell off a residential roof onto the ground. The employee was hospitalized for back and neck fractures.",1
"At about 8:00 a.m. on August 14, 2020, an employee was adjusting a binding machine when its feed hopper lowered and crushed the employee's left index finger. The fingertip was medically amputated. The machine's safety interlock was not operational at the time of the incident.",0
"Two employees were carrying a 100-pound foam void. One of them fell backwards to the ground, hitting his head and losing consciousness.",1
"An employee was moving a cart of recycled material. A manual jack struck the cart. The employee fell backwards to the ground, suffering a rib injury.",1
An employee was walking to a nurse's station when she slipped on a cotton bandage and fell. She suffered a thoracic spine injury.,1
"While erecting stair tower scaffolding, an employee fell about 6 feet and landed on a concrete slab. The employee suffered a back injury.",1
"On August 14, 2020, a temporary employee was throwing an empty cardboard box into a construction dumpster when nearby employees heard him call out. They found him on his knees with his hands on the dumpster. He experienced neck pain and numb legs, requiring hospitalization.",1
"After working on an HVAC system on top of a warehouse office, an employee was descending a ladder when it started to slip. He then jumped down a couple of feet and dislocated his ankle.",1
"An employee was installing a roof on top of a newly constructed water tank. The employee fell 16 feet through the roof to the steel surface below, suffering a head injury, a broken pelvis, and a broken vertebra.",1
"On August 14, 2020, a temporary employee was hanging spline shaft parts on vertical racking on a line to be washed. The employee hung a part on the top row of the racking and was hanging a part on the bottom row when the part fell from the top row. It landed on the employee's left hand, breaking and wounding the little finger.",1
An employee was performing aircraft maintenance and fell approximately 8 feet from the work platform to the concrete floor resulting in a fractured elbow.,1
A mechanic was performing an alignment on a vehicle. A second mechanic was inside the vehicle checking on an air conditioning part. The vehicle was inadvertently placed in drive and the brake brace was knocked out of the way. The vehicle fell off the ramp and struck the first mechanic in the head. The mechanic was hospitalized for a fractured skull and ear laceration.,1
An employee was walking into her work area when she slipped on the wet floor and fell. She sustained a fractured femur and was hospitalized.,1
"On August 15, 2020, an employee working at a cash register experienced a back spasm that required hospitalization.",1
An employee was using a bandsaw in a meat processing area. The blade caught her glove and amputated her left middle fingertip.,0
An employee was securing a tarp on a trailer and fell 12 feet from the trailer to the ground. The employee suffered a broken wrist and arm.,1
An employee was operating a standup forklift when his left foot was pinned between the back of the forklift and the baseplate of a safety bollard near the path of travel. He was hospitalized with left foot fractures and lacerations.,1
"An employee was tying back airlines and cables near a moving belt. His gloves touched the belt, which drew his hand into the end pulley. He suffered a broken wrist.",1
An employee was approaching a cat (a veterinary patient) when it bit her left middle finger.,1
An employee was unjamming a press when the press was activated and the press crushed/severed the employee's right ring finger. The press was unguarded and was not locked/tagged out at the time of the incident.,0
An employee fainted inside a trailer during a delivery due to dehydration and heat stress.,1
"On August 15, 2020, an employee was unjamming the rotating diverter wheel on a production machine. The tension released, pushing the employee's hand into a compressed air jet. The air punctured her hand and she was hospitalized.",1
An employee was working on a ladder positioned on a scaffold and fell to the ground. The employee was hospitalized with head and back injuries.,1
An employee was rolling a trim roll of paper when it hit the side of a packaging machine and tipped over. The roll landed on the employee's foot and amputated two toes.,0
An employee had attached crane rigging to a transformer coil and was adjusting an outrigger block. The crane activated and the employee's left thumb was caught between the crane block and the rigging. The thumb tip was amputated.,0
"A mechanic was preparing to replace a filter assembly for a recirculation fan on a passenger aircraft. He reached to remove a screw near the fan, which sucked in his right hand and amputated his index fingertip.",0
"An employee was attempting to close the extended lip of a malfunctioning dock plate. He used a T-bar to prop the dock plate up while trying to disengage the dock lock with another T-bar. The T-bar propping up the dock plate fell, causing the dock plate to fall down on his left arm and break it.",1
An employee was washing the southeast side of a poultry barn with a pressure washer. Water from the pressure wand lacerated her left forearm.,1
"An employee was working near a shelf containing sheet metal parts when a forklift truck on the other side pushed a sheet metal part off the shelf. The part fell on the employee, causing a facial laceration and fractured right femur.",1
"An employee was using a circular saw to cut wood. The wood got jammed inside the saw's guard, and the saw cut the employee's ankle, causing a laceration that required surgery.",1
"An employee was repairing broken blades on a sod cutter. As he was checking his work, a blade amputated his right thumb.",0
"An employee was transporting a patient to a psychiatric unit. The patient struck the employee in the nose with a stethoscope, breaking the employee's nose. The employee was hospitalized.",1
The injured employee was standing in a hole with a pipe in it during road construction. The employee was unloading bags of concrete from an excavator bucket in preparation for pouring the concrete around the pipe in the hole. The excavator bucket was lowered onto the employee's left foot. The employee was hospitalized for a crushing injury to the left foot that required surgery.,1
An employee was installing a pipe liner in a sewer manhole and suffered second-degree burns.,1
An employee was bending metal to make air ducts and the machine caught the employee's hair.,1
An employee was cutting a lintel with a chop saw. The saw kicked back and cut him.,1
A roofer was climbing a ladder to go onto the roof when he fell off the ladder onto the ground and broke his right ankle.,1
"An employee tripped over a cart and fell to the floor, suffering a broken hip.",1
An employee was lowering the trailer's support arm to the hitch on a truck and amputated the left ring and middle fingers.,1
"An employee fell from a stand-up reach truck to the concrete floor, suffering a 2-inch head laceration.",1
An employee fell down a flight of stairs and sustained a broken hip.,1
"Two employees were changing out a dock leveler's dock plate. While the injured employee was on his hands and knees under the leveler, installing the keeper-pins, a forklift that had been holding up the dock leveler's lip hinge moved back and released the dock plate. The plate fell on the injured employee, breaking most of his ribs, causing internal bleeding, and causing a T-Fracture in his lower back as well as fracture to the upper back.",1
"An employee was operating a caustic flush and adding potassium hydroxide to water when the solution splashed him, causing chemical burns to his arm, face, and head. He was hospitalized.",1
An employee was preparing to bend copper pipe with a hand-held pipe bender. The employee's left thumb was caught and fractured between the pipe bender's cylinder and the pipe.,1
"On August 17, 2020, an employee was using a pry bar to remove nails from metal on the edge of a roof. He fell off the roof to the concrete ground below, suffering two broken wrists, broken ribs, a neck injury, and a collapsed lung.",1
"An employee was guiding a steel stair suspended from a crane hook into place to be connected with bolts. He used his sleever bar to guide and make sure the stair riser cleared the opening in the steel, but the top stair riser got hung up on the support beam. He pushed the stair riser with his foot. A clip angle on the stair got caught on the employee's pant leg and the stair swung back and caught the employee's right leg between the stair and the steel support beam. The leg was fractured above the ankle and required surgery.",1
"An employee was grabbing a knife tub containing approximately 40 knives when the employee's left hand entered a hole on the bottom of the tub and contacted a knife blade, causing a laceration.",1
"While attempting to repel from a tree, a smoke jumper fell approximately 25 feet to the ground. The employee was hospitalized with a fractured L4 vertebra and a shoulder injury requiring surgery.",1
"On August 17, 2020, an employee was cutting a demolished section of a ceiling into pieces. The employee's saw jerked at the end of a cut and lacerated the employee's left shoulder and chest.",1
"On August 19, 2020, a piece of cracked window glass fell out while being moved, cutting an employee's right calf muscle.",1
"An employee was climbing down an access ladder from a roof. He fell from the fourth rung, landing on his side and suffering a broken right hip.",1
"A forklift struck the employee spotting it as it backed up, injuring the employee's ankle. The employee was hospitalized.",1
The injured employee was talking to an employee that was on a skid steer when the injured employee's foot got caught under the skid steer. The injured employee sustained the amputation of the right big toe and possibly the second toe.,0
An employee climbed a wooden pole to remove a downed conductor. The employee's right arm contacted the bottom of the energized switch and received third degree burns.,1
An employee suffered a broken bone while working on deliveries via a box truck.,1
"An employee was in a boom truck, cutting limbs off a tree. He made a notch on a limb that forced the boom down and he was ejected, landing on the ground 15-20 feet below. He suffered a fractured skull and fractured vertebrae. Fall protection was not tied in at the time.",1
"An employee was standing by a press, waiting for a fork truck to drop off a metal coil. The coil was set on the floor and the fork truck backed out. The coil started to roll, then fell over while the employee was trying to balance it. It struck the employee's right leg, causing a fracture that required surgery.",1
"An employee hit his head on the inside of his car. He was hospitalized, suffering from brain bleeding.",1
"Employees were inside the basket of the feed truck repairing the drive shaft on the main floor chain that is beneath the grain pile and perpendicular to the feeder/delivery chain. As the employees were removing feed from the main floor basket to access the drive shaft, an employee was swept by the feeder chain and pulled up and entangled into the beater bar. The employee was hospitalized with a lacerated chest, punctured lung and broken left tibia.",1
"An employee was cutting lamb with a meat bandsaw. The saw amputated his right thumb tip, just past the fingernail.",0
An employee was coming down a 4-foot step ladder and missed the last rung. The employee fell to the floor and suffered multiple fractures to the lower left leg.,1
An employee was moving grain from a truck into a mill. A nearby auger caught the employee's pants leg and pulled the clothing off; the employee suffered an abdominal injury that required surgery.,1
"An employee was standing on a baker's scaffold, pumping concrete into a concrete block wall. A 4-inch drop in the concrete slab caused the scaffold to lean against the wall. The impact broke the employee's leg.",1
"An employee was unclogging a riding lawn mower. The mower's impeller cut the employee's left middle finger at the knuckle, causing a fracture and ligament damage that required surgery.",1
"An employee fell from a 4-foot ladder while restocking 5 lb. bags, impacting the ground and fracturing his lower left leg.",1
"An employee was installing an 18-inch pipeline flange that weighed about 150 pounds. The flange made contact with the employee's right thumb, lacerating and breaking it.",1
"An employee was loading countertop slabs onto an A-frame on the back of a flatbed truck. The slabs began to fall, causing the employee to fall onto the ground with his head and torso below the truck. The slabs then fell onto his legs. His left leg was amputated.",1
"An employee was on a ladder, lost balance, and fell to the ground. The employee suffered a broken collarbone, scapula and broken ribs.",1
An employee was on a scissor lift using a pressure washer and fell to the concrete floor. The employee sustained a broken femur and elbow.,1
"After performing grinding outdoors, an employee suffered heat stress.",1
"On August 18, 2020, an employee was adjusting the timing on a tray forming machine. The employee's left hand was caught between a counterweight and a stationary support for the machine; two bones in the hand were broken and the employee was hospitalized.",1
"On August 18, 2020, a car drove through the front of an office. An employee working in the office suffered broken bones and internal injuries. She was hospitalized.",1
"An employee was in the bucket of a bucket truck, repairing a storm-damaged electrical distribution line at the top of a pole. The employee was shocked, suffering first- and second-degree burns. The employee was hospitalized.",1
"An employee was removing the gas cap from a gasoline engine that was in a semi-trailer. The vapor from the fuel ignited, severely burning the employee.",1
"An employee was inspecting the welds on a 10-inch pipe. A 24-inch pipe next to the 10-inch pipe rolled off a piece of dunnage while the employee was passing over it, causing the employee to strike the 10-inch pipe with his right side. He suffered a kidney injury and was hospitalized.",1
"An employee was loading a trailer when the tongue of the trailer struck him, fracturing his right leg.",1
"An employee was opening a bundle of bar joists. One of the joists fell and caused another joist to hit the employee's left leg, breaking it. The employee was hospitalized.",1
"An employee was struck by a car while walking in a parking lot, suffering a broken tibia.",1
An employee was operating a ride-on pallet jack. His foot was caught and broken between the pallet jack and a conveyor.,1
"An employee was helping reconnect a drag chain. The chain began jumping; as he tried to hold it down, his foot was caught between the chain and a sprocket. Three of his toes were smashed, and there was an amputation.",1
"An employee fell from the top of a tanker trailer, landing on the ground about 8-10 feet below. The employee suffered a bruised right shoulder and a cut above the right eyebrow that required stitches.",1
An employee was operating an electric pallet rider when he hit a parked pallet rider. His left foot was caught between the two riders.,1
"An employee was next to the ""little blue cars"" at a shipyard. When the cars were pushed under a strongback (a wooden block) that was supporting a unit, the block was pushed off and fell onto the employee's left hand. He suffered a partial amputation of the middle fingertip, as well as open fractures of the middle and ring fingers.",0
An employee turned on a combustor at an oil and gas production site. A flash fire caused second-degree burns to the employee's hands and first-degree burns to his nose and ears.,1
"An employee was checking a belt. The returning fan and pulley caught the employee's right hand, amputating the tip of the employee's thumb.",0
"An employee was riding on a trailer inside a closed traffic lane, picking up traffic cones. His foot slipped off, hit the pavement directly in front of the trailer tire, and was run over. He suffered a broken ankle.",1
"An employee fell through a 48-inch opening in the roof where two panels had been removed and struck a shelving unit and then landed on the floor approximately 30 feet below. The employee suffered fractured ribs, a punctured lung, and a bruised liver. The employee was not tied off at the time.",1
An employee was clearing a jam on a conveyor when the machine started up and amputated the employee's right index finger.,0
"An employee was helping a forklift operator move a pallet and a 4X4 piece of wood when the employee's right pinky was crushed between the pallet and the 4x4, resulting in a fingertip amputation.",1
"An employee was unloading a piece of quartz from a truck. The quartz dropped onto his foot, breaking his toes.",1
"A temporary employee was cleaning out a nut mixer when the blade started and pinned his right arm to the side of the mixer, crushing it. He was hospitalized.",1
"An employee's fingers were pinched in the cart tipper on the back of a garbage truck, causing injuries that required surgery.",1
"An employee fell while walking down a flight of stairs, suffering a broken right hip.",1
"A machine struck an employee in the leg, lacerating it. The employee was hospitalized.",1
"A maintenance technician was inside the bucket of a bucket truck, which was on the side of the highway. The bucket was 20 feet in the air when the bucket truck was struck by a passing vehicle. The employee was thrown from the bucket to the ground and sustained a broken pelvis, fractured ribs, and a dislocated shoulder. The employee was hospitalized.",1
"At 11:35 a.m. on August 18, 2020, an employee was poisoned after drinking from a drink bottle containing a chemical.",1
"An employee was working on a sewer line in a trench, replacing water line saddles when soil materials broke loose from the trench wall and fell on the employee's leg, fracturing it.",1
"An employee slipped on a wet lobby floor and fell, suffering a broken kneecap.",1
"An employee was removing an earth mover's drive shaft when it fell and crushed his left middle finger, causing an avulsion.",1
"A census worker was on a house porch, asking the homeowner questions. A dog ran out of the house and knocked her off the porch to the ground. She suffered broken ribs and a twisted knee.",1
An employee was loading marble slabs onto a delivery truck using a forklift. A slab fell off the truck and struck the employee in the back of the neck/shoulders. The employee then fell forward and struck their head on a slab that was stored adjacent to the truck. The employee was hospitalized for a laceration.,1
"An employee was performing repairs to the fan deck in a cooling tower. Upon entry into the cooling tower, the platform failed and the employee fell approximately 50 feet to the concrete basin at the bottom of the tower. The employee was hospitalized for three fractured vertebrae in the back, fractured tibia bones in both legs, a left elbow fracture, injuries to both knees, internal bleeding, bruised lungs, a concussion, lacerations to the head, and nerve impingement (back).",1
"An employee fell out of a vehicle after it was lifted 4 feet with him inside it. He landed on the concrete floor, suffering lacerations and broken bones.",1
"At 1:45 p.m. on August 19, 2020, two employees were putting a highway sign on a flatbed truck. The wind blew the sign, knocking one of the employees off the truck. The back of his head struck the curb. He suffered lacerations to the back of the head, a laceration near his left cheek, a broken forearm, and a concussion. He was hospitalized.",1
An employee returned from making deliveries and began to experience chest pain. The employee was hospitalized with an inflamed muscle.,1
"On August 19, 2020, an employee was shocked by a live wire while working on a moored yacht. The employee was hospitalized.",1
"An employee was cleaning bottles in the trimmer section of a blow mold machine when the employee's finger was caught in the machinery, resulting in a transphalangeal amputation of the right ring finger.",0
"An employee pinched their right thumb between a wrench and a nut, resulting in a partial amputation.",0
"An employee was sawing tubing on a horizontal band saw. He was brushing chips away from the saw blade when it amputated his left middle fingertip just behind the nail, also lacerating his ring finger.",0
The injured employee was rolling up product with a co-worker when a roller pulled his gloved left hand forward. The weight of the roller smashed his fingers resulting in a partial amputation of the index finger and a fracture to the middle finger.,0
"An employee was standing on the ladder/steps of a semi-truck. While swatting at a bug, the employee fell to the ground and fractured the left tibia.",1
"An employee had been retrieving a one-gallon pail of paint from a shelf. While descending a three-step step ladder, the employee fell from the second step to the floor and sustained a broken hip.",1
"An employee was trying to move a box jammed in racking. The box was dislodged and the employee slipped, fell, and hit the ground, suffering a broken left hip.",1
An employee experienced cramping at the end of his shift. He was hospitalized for dehydration.,1
"On 8/19/2020, at 6:20 a.m., an employee was performing routine cleaning on a reclaim pelletizer. While performing this task, the employee attempted to activate the dump valve that stores hot water. Due to an internal defect on the pipe valve, the hot water did not drain out completely. As the employee released the locking collar, the stored water released through the gap, spraying hot water onto the employee. The employee sustained first and second degree thermal burns to the chest and left arm.",1
"An employee fell from the second floor of a creel rack, suffering a broken left femur.",1
A staple gun fired a staple into an employee's right thumb. The employee was hospitalized.,1
"An employee was tasked with maintenance work on top of a cooling tower. While leaving the tower, the employee lost his footing and fell to the ground, resulting in a head laceration, bruised lung, and spinal fractures.",1
An employee was repairing a leak on a metal roof. While walking on the roof the employee fell 15 feet through an opening to the concrete surface below. The employee was hospitalized for a concussion.,1
An employee was investigating a car accident in the parking lot outside the lobby and was struck by another car. The employee suffered a head injury.,1
"On August 19, 2020, an employee was turning to pick up cleaning rags from a countertop, tripped over the legs of a stool, and fell to the floor. The employee was hospitalized for a leg fracture in two places.",1
An employee tripped on a curb and fell to the ground on their side. The employee suffered five broken ribs.,1
An employee was driving a mobile cart. His left foot was caught and broken between the cart and a stationary post.,1
"An employee was on an extension ladder approximately 4 feet off the ground opening a junction box on the exterior of a house to trace the wires for a security camera installation. Upon removal of the cover plate of the junction box, a swarm of wasps started to rapidly fly out of the junction box toward the employee. The employee was startled, lost balance on the ladder, and fell to the ground. The employee sustained a fractured left wrist and a fractured L1 vertebra, requiring hospitalization.",1
"An employee was using a portable hydraulic press to push a pin out of a pipe. The pin sheared off and flew toward the employee's head, lacerating it.",1
"An employee was attempting to unclog a breading machine. When he tried to jog the belt his hand was caught between the belt and pulley, resulting in a fingertip amputation.",0
"An employee fell down a two-step stairway, hitting a paved surface and suffering a broken pelvis/hip. She was hospitalized.",1
An employee was cutting 3/4-inch plywood with a table saw. The saw lacerated the employee's left thumb. The employee was hospitalized for surgery to repair the injury.,1
"A census worker was approaching a residence when a dog bit her ankle. One of its teeth was embedded in the ankle and she was hospitalized, undergoing surgery.",1
An employee was attempting to open a door to enter the office area when she slipped and fell to the floor. She was hospitalized with a hairline fracture to her hip.,1
"On August 19, 2020, at approximately 12:15 PM, an employee was restocking the supplies in a customer service area. She placed her stock onto the counter and walked around, entering the retail lobby through the lobby entrance. As she pushed open the lobby door, she fell onto her right side. She was hospitalized with a broken hip.",1
The injured employee delivered cement to the customer and was cleaning the chute on the concrete truck in the staging area established at the site for cleaning tools. A track hoe arrived at the staging area for cleaning. The injured employee was standing between the concrete truck and track hoe and was struck in the abdomen by the track hoe bucket. The employee was hospitalized.,1
An employee slipped on spilled juice while walking across a dining area. She fell to the ground and suffered a broken left kneecap.,1
While grinding a piece of metal an employee's left thumb got caught between the piece of metal and the grinding wheel resulting in partial amputation of the left thumb.,0
"An employee developed heat-related illness about 45 minutes before the end of his shift offloading cars. He was hospitalized the next morning, suffering from dehydration.",1
An employee was moving a tote of chicken when their right thumb and index finger were pinched by the belt drive on the shaker table resulting in a partial amputation.,0
An employee was operating a feed auger mounted on a 2-ton truck. The auger caught the employee's arm and amputated his hand. He was hospitalized.,1
"An employee was getting ready to switch out a motor on a piece of foundry equipment. The motor shifted, crushing the employee's left ring finger against its metal frame and causing a partial amputation to the finger.",0
"An outrigger on a concrete truck shifted, causing the truck boom to strike an employee. The employee suffered a bruised spine and was hospitalized.",1
"An employee fell to the concrete ground while stepping out of the cab of his tractor-trailer. The employee sustained a fractured left hip, requiring hospitalization and surgery.",1
"An employee was cleaning a lawn mower that was on a jack. When the employee was lowering the jack, the jack fell on his hand and amputated the tip of his left thumb.",0
An employee was troubleshooting a system when his left middle finger was caught between the mount and guiderail of a stencil machine. The tip of the finger was amputated with no bone loss.,0
"On August 20, 2020, a grocery clerk reached for the cash drawer to pull himself up from a kneeling position and tore his left triceps muscle. The employee was admitted to the hospital.",1
"An employee tripped and fell from a single step to the ground, resulting in fractured right leg.",1
"An employee was pulling a wheeled cart containing parts to another area of the assembly line. During transport, the cart hit a floor mounted rail track in the aisle, causing the cart to tip over. The cart struck the employee's lower right leg and fractured the tibia and fibula.",1
"A crane operator was moving a high-tension power pole. The top/spreader bar on a foundry hook made contact with the pole, causing slack in the crane cable. It disconnected, fell about 3 feet, and struck the employee's shoulder.",1
"An employee was straightening rollers on a load when the roller's wheels collapsed and fell on his right foot, breaking two bones.",1
An employee was washing down a conveyor belt. He slipped on a platform and his glove went into a 3/4-inch gap in the back of the chain guard. The chain drive pulled in his hand. He suffered amputations to the left ring and index fingers.,1
An employee was struck by a piece of wood that fell off a swing stage scaffold and suffered a broken leg.,1
"An employee arrived at work, turned the corner leading into the cafeteria, tripped over a box, and fell. The employee sustained a broken right kneecap.",1
While walking through the parking lot an employee tripped on the corner of a curb around a flag pole and fell onto the concrete flag pole setting. The employee was hospitalized with fractured ribs and a punctured/collapsed lung.,1
An employee felt upper-leg pain while walking into a building. The employee's femur was broken.,1
An employee was post-tensioning an arch culvert. The post-tensioning machine caught and injured the employee's left thumb. The employee was hospitalized.,1
"An employee was clearing soil away from an underground power line with a shovel. The shovel cut through the wire's insulation, resulting in an arc flash that caused first-degree burns to the employee's arms and neck.",1
An employee was attempting to free a plastic bag that had become jammed in the bagging machine and suffered a partial amputation of the right index finger.,0
"Two mechanics were working on a semi. The semi was started from the ground and lurched forward, pinning one of the employees against the back of a box truck. The employee suffered a crushing injury to the left leg and torso.",1
An employee was riding on the paver box when their fingers were caught between the guardrail and the mechanical lift on the paver. The employee's left middle and ring fingertips were amputated.,0
"An employee was loading large cylindrical arbors vertically into a cart with wheels when an arbor fell. This caused a shift in weight and the basket became top-heavy and tilted. The employee's hand was still on the lifting device connected to the hoist and arbor when the basket and arbors shifted. His left ring finger was caught in a pinch point, resulting in a fingertip amputation.",0
An employee was inserting the pin of the hydraulic cylinder into the trench box hole when her right middle finger got caught in between the pin of the hydraulic cylinder and the trench box hole and was amputated.,0
An employee was removing paper from a paper bag machine. The gears in the bundler amputated the employee's right index finger at the knuckle.,0
An employee was inspecting bearings on equipment while walking around the equipment. He stepped through an open hatchway and fell eight feet to the level below landing on grating. The employee sustained a fractured spine and a concussion.,1
An employee was disassembling a mobile crane. Part of the crane came in contact with a service line for a cell tower. The employee sustained electrical burns to the left arm and right foot.,1
"An employee and fell while walking to retrieve a seat cushion, suffering a broken ankle.",1
An employee was driving a golf cart when it crashed into a stationary bollard. The employee suffered contusions to the chest and abdomen.,1
"A driver was at a customer's location unloading fiberglass insulation on pallets. As the driver was removing a pallet, the top bags got caught on the door and shifted. The driver tried to shift them back and fell from the liftgate at the back of the truck. The driver sustained a cut on the leg and possible bone damage.",1
"An employee was operating a machine when his foot was caught in its chain and sprocket. He suffered severe lacerations and fractures and was hospitalized, requiring surgery.",1
An employee was sweeping sunflower seeds into the floor auger portals in a flat-bottom grain storage bin. He slipped down a pile of seeds (about 5-6 feet tall) and his leg was caught by an auger. His leg was amputated.,1
An employee climbed onto the wing of a B-52 aircraft from an aerial lift to begin preparations for priming. The employee slid off the wing to the floor approximately 7 feet below. The employee landed on his knees then hit his head on the rear landing gear tire that resulted in an injury requiring stitches. The employee also sustained a possible fractured hip. The employee was wearing fall protection at the time.,1
"An employee was working on slab lifter tongs with another employee. The employee was placing a stone slab wedge to separate bundles so that the clamps could pick up a stone slab. The 400-pound stone slab overturned, pinning the employee between the stone slab and the unloading dock. The employee sustained a broken ankle and was hospitalized.",1
"On August 21, 2020, a census worker was on a residential porch. The resident opened the screen door and the resident's dog lunged at the employee, causing the employee to fall off the porch and suffer a broken ankle, a broken leg, and a dislocated shoulder.",1
An employee fell from a ladder to the ground and sustained a laceration and possible concussion.,1
An employee was operating a press to bend metal flashing. His finger slipped into the press at the same time the machine cycled and his hands were crushed. The employee was hospitalized.,1
An employee sustained a middle finger amputation during the operation of a meat tenderizer.,0
"An employee was standing next to a forklift when it turned and caught the employee's leg, resulting in hospitalization with broken bones.",1
An employee was attempting to punch a hole into the cooling tower support beam using the hydraulic punch set. The employee's foot slipped out on uneven ground and the employee fell to the ground dropping the tool onto his leg and fracturing it.,1
An employee was lifting a dock plate to make a delivery when the dock plate smashed and crushed the employee's pinky finger.,1
An employee was removing meat from a grinder and the blade amputated finger(s) on the left hand.,0
An employee had been conducting flagging operations at an intersection where other employees were applying hot tar to the road. The employee went to get onto the hot tar buggy to ride to the next intersection but fell off the buggy and landed in hot tar that had puddled on the road. The employee sustained burns to his left arm and right hand. He also sustained a bruised left leg.,1
An employee had been wearing a surgical mask for extended periods of time which caused a cut into the back of the left ear that resulted in a bacterial infection. The employee was hospitalized.,1
An employee suffered an amputated right index finger while tying a rope around a cleat on a dock to secure a boat.,0
An employee was sand blasting a tank and was struck in the right arm by the air and sand (125 psi) which penetrated and lacerated their arm.,1
An employee was using a chain to close a parking lot gate. The gate was connected to an electric fence; one of the electric guide wires touched the chain and the employee was shocked. The employee was hospitalized.,1
"An employee was putting a 120-pound piece of scrap steel plate into a scrap bin. The piece fell onto the employee's right foot, causing ligament damage.",1
An employee was on the platform of a 4-foot high platform step ladder to install reshoring for pour-in-place concrete construction. The employee fell approximately 4 feet from the platform to the floor and sustained a back injury.,1
An employee was driving a four-wheeler when it hit a ditch and rolled over. The employee's lower right leg was broken.,1
An employee was wiping the top of a machine with a cloth when her finger slipped through an opening on the guard and the mold clamp closed on her fingertip and amputated it.,0
An employee was forming parts on a 100-ton press brake and caught his left hand between the lower and upper die resulting in four broken fingers and a lacerated thumb.,1
"A pharmacy courier was pushing a med-cart into the facility when the employee lost control, causing the cart and the employee to fall off the edge of a loading dock. The employee was hospitalized for multiple fractures to his right arm.",1
An employee was operating a skid steer when his foot was caught between the bucket and base of the skid steer. The employee sustained two closed fractures to the right ankle.,1
An employee was moving wood in a roll-off box when a piece of wood slipped and lacerated the employee's right leg.,1
An employee was working on top of an elevator car removing counterweights. The elevator car was being lowered when the coffing hoist holding it up snapped and the elevator car and the employee fell from the 10th floor to the basement. The employee sustained broken bones.,1
"An employee was preparing steel flats to be loaded using an overhead crane and a hook. He lifted the material about 4 inches up and attempted to put a block under the material with his right hand. The material slipped off the hook and came down on his right hand, crushing and amputating the index finger below the second knuckle.",0
While reaching for the button to raise the overhead door of a truck an employee's arm was caught in a loop of the wire cable that raises and lowers the door. The employee was lifted and sustained two arm fractures.,1
"An employee fell from the top of a truck cab to the ground, suffering injuries. The employee was hospitalized.",1
"An employee was tightening bolts on the handrail system of a boat dock under construction. The employee fell from the dock's roof, landed on the construction platform, and then fell to the ground. The employee suffered contusions and lacerations to the head, neck, left arm, and left leg, as well as a wrist fracture that required surgery. The employee was hospitalized.",1
"An employee was placing a vinyl/canvas cover over the bucket of a bucket truck. The employee slipped on the non-skid surface of the platform beneath the boom cradle and fell to the ground, suffering a broken left tibia and fibula.",1
An employee was descending the stairs from the fourth floor down to the third floor when she slipped and fell. The employee was hospitalized with a fractured left ankle.,1
An employee was clearing product out of the cutting machine and amputated the tip of his left middle finger.,0
"At about 8:15 a.m. on August 22, 2020, an employee was in a truck yard opening the swing-style doors on the back of a semi trailer. When the employee opened the right-side door, a generator weighing over 200 pounds fell and struck the employee, knocking her to the ground. She suffered a broken right ankle.",1
An employee was working on a box conveyor machine. He was cleaning the chain when the chain and sprocket caught his fingers. His right ring and little fingers were amputated.,1
An employee was ascending a tree using climbing equipment. A large hollow space in the tree collapsed causing the employee to fall 30 feet to the ground. The employee was hospitalized for a  broken right shoulder and broken ribs.,1
"A small book cart slipped off the forks of a forklift and fell on an employee, crushing the employee's arm and shoulder.",1
"On August 22, 2020, the injured employee and a coworker were removing a trash gondola out of a compactor. Both were positioned outside of the compactor. As they were attempting to slide it down to the base of the gondola tipper, the gondola moved and caught the injured employee's fifth digit on his right hand and amputated it at the nail bed.",0
"An employee was using a pneumatic nail gun. A nail bounced back and struck the employee in the eye, cutting the eyelid. The employee was hospitalized.",1
"An employee slipped and fell on concrete steps while walking toward a house to conduct work, suffering a fractured leg.",1
"An employee was helping a customer inside the store when a motorist outside lost control of her vehicle, crashed through the store wall, and struck the employee. He was hospitalized with a lacerated liver.",1
An employee had been helping to switching cars. The employee began to feel ill and was hospitalized with dehydration.,1
"An employee was on the working platform of a scaffold at a height of approximately 9 feet doing welding operations. During an alarm, the employee fell from the scaffold's ladder to the ground, resulting in a compound fracture to the lower left leg requiring hospitalization and surgery.",1
"On August 23, 2020, an employee was walking from a fitting room to a sales floor. The employee's foot got caught under a chair and the employee fell, suffering a twisted and strained left knee. The employee was hospitalized.",1
"An employee was in a restroom when the automatic lights shut off. He was trying to find the exit when his head struck the wall. He lost consciousness and suffered head, neck, and back injuries.",1
"On August 23, 2020, an employee was checking the pressure on compressed oxygen cylinders used for boiler chemistry control. When the employee opened a cylinder manifold valve, the stainless steel braided hose connecting the cylinder cradle to the pressure gauge failed and whipped around, striking the employee on the back and the left elbow. The employee suffered a 6-inch laceration to the elbow and was hospitalized.",1
"An employee was retrieving two cargo airbags for loading a truck. While driving a powered industrial truck (PIT) down the dock, the PIT collided with a bollard by a door. The employee sustained a left thumb amputation.",1
"A cashier was walking from her register to a desk. She tripped over her portable oxygen hose and fell to the floor, suffering a broken hip.",1
"An employee was trying to get a dock plate up to put in the back of a trailer. The plate was stuck. Another employee picked it back up; the first employee slipped and fell, and his hand was pinched by the lip of the dock plate. He suffered a partial amputation to the left thumb (with no bone loss).",0
While working on a metal slitter machine an employee sustained an amputation to the right index finger and a laceration to the right middle finger.,1
"An employee was changing out the capacitor on the blower motor of a heat pump. After the swap out, he turned the power back on, but the blower motor was not working. He reached under the unit and disconnected the 277-volt power. The employee was then electrocuted and dropped to the floor.",1
An employee slipped and fell down stairs while delivering mail. She hit the ground and suffered a broken right ankle.,1
"An employee was placing steel angles on skids. Multiple steel angles fell off a skid, dislocating and fracturing the employee's heels. The employee was hospitalized.",1
"An employee was using a cutoff saw when it kicked back and lacerated the employee's upper left arm. The employee was hospitalized, requiring surgery.",1
"An employee was fixing a clamp on a metal saw. The clamp was moved and caught the employee's hand/wrist against the side wall of the machine, breaking them.",1
"On 8-24-2020 at 2:40 a.m., an Ivory Solutions employee was on a stepladder removing a ceiling when the ceiling fell, causing the employee to fall off the stepladder. As he fell, he hit his ribs on the ladder, injuring them and requiring hospitalization.",1
"An employee was filling a wall using a grout pump that was mounted on the elevated forks of a telehandler. The lift tipped forward and the pump struck the employee. The employee was hospitalized with injuries to the head, ribs, eye, and hand.",1
"An employee tripped on a fuel hose while fueling a vehicle at a gas station. The employee fell to the ground, suffering a broken and dislocated elbow.",1
An employee was drilling holes in crane mats. A grate guarding the auger underneath the floor was dislodged and the employee's foot slipped through the hole and was lacerated by the auger.,1
"An employee was cleaning up steel banding. The banding whipped and cut the employee, causing an inch-deep laceration about an inch above the right elbow.",1
"On August 24, 2020, two employees were installing the lower shelf inside a carousel used to dispense prescription medicine. The carousel cycled and its door came down on one employee's chest, causing cracked ribs, a collapsed lung, and hematomas.",1
An employee was removing a tarp covering a mechanical fabrication area. The employee was standing on the fourth rung of an 8-foot ladder when he lost his footing and fell to the ground sustaining a broken tibia/fibula.,1
An employee lost balance while on an extension ladder and fell. The employee sustained broken bones in the shoulder and ankle requiring surgery.,1
"An employee fell, injuring his ankle and breaking his index finger. He was hospitalized.",1
"An employee was walking a piece of angle steel down to be loaded onto a truck for delivery. While removing the chain from around the piece of steel, the chain slipped and caught the employee's fingertip against the angle steel, resulting in a fingertip amputation.",0
An employee was waiting for rebar to be unloaded from a trailer. Straps broke and rebar struck the employee in the head. The employee was hospitalized with a head injury.,1
"An employee injured her hand in a machine. She was hospitalized, requiring surgery.",1
An employee was crossing over a conveyor when she stepped on the moving conveyor. The conveyor caught her leg and fractured it in three places.,1
An employee was receiving a piece of rebar that was being lowered to him. The rebar was dropped. Its point hit the employee's hard hat and was deflected into the back of his left shoulder.,1
"An employee tripped over debris and fell, striking his right hip on the ground. The employee sustained a broken hip, requiring hospitalization and surgery.",1
An employee suffered a dislocated kneecap while squatting to inspect a pallet.,1
"An employee was operating an incinerator. While opening the door of the incinerator, a metal part of the incinerator lacerated the employee's left forearm.",1
An employee was operating a portable circular saw. The saw amputated two fingers from his left hand.,0
"An employee was using a circular saw when it cut his finger, resulting in an amputation.",0
An employee was rolling a dumpster to the loading dock for collection when his right hand was caught and fractured between the roll-off dumpster and a concrete wall.,1
Two employees were repairing a grain auger that was hitched to a tractor. The tractor was turned on to make the auger rotate so the employees could ensure that the repair was complete. When the auger began to rotate it caught the left foot of one of the employees. The injured employee sustained a partial amputation of the left foot (from the arch to the toes).,1
An employee was replacing a damaged air break switch at a distribution circuit. A surge arrestor connected to the air break switch failed and an arc flash caused burns to the employee's face.,1
An employee was applying brush-on paint stripper to a concrete wall. Paint stripper ran into his glove and contacted his forearm. The employee was hospitalized with chemical burns to the forearm.,1
"At about 11:40 a.m. on August 24, 2020, an employee was aligning the lower flight into a grain cart with a hoist. As the flight dropped into place, it amputated the tip of his right index finger.",0
An employee was preparing to realign a product back onto the core of a shaft. The employee's arm was caught by the rotating shaft and became bound up in the product. The employee's left shoulder was dislocated and their left forearm was broken.,1
"An employee was climbing a 16-foot ladder that had been placed on a wall. He slipped and fell from halfway up the ladder, landing on the floor in a standing position and suffering a broken right ankle. He was hospitalized, requiring surgery.",1
"Two barges were lodged together. An employee was on the walking surface of one of the barges when the two barges abruptly dislodged. The employee was ejected from the barge, landing in the water and sustaining lacerations to the head and left arm.",1
An employee was backing a forklift down a warehouse dock. The forklift collided with another forklift; the employee's left foot was caught and broken between the two.,1
"An employee fell while climbing down a ladder. The employee struck a guardrail and then landed on the ground, suffering injuries to the lower back and abdomen.",1
"An employee was operating a skid steer in a closed lane of a public roadway. A city bus struck the skid steer, which tipped on its side. The employee suffered possible broken ribs and a concussion.",1
"A hopper lid fell on an employee who was removing a bag, injuring the back of his neck and his upper back.",1
A crew of five employees used two forklifts along with a telehandler to load and carry pipe that had been cut into 125-foot sections from the fuel pier to the parking lot for painting. The injured employee was guiding the pipe while it was being moved by the forklift. The pipe struck a bush and began swaying and the injured employee's hand was caught between the pipe and the building next to it. The employee's right ring and pinky fingers were amputated.,0
"On August 24, 2020, an employee was servicing a diesel engine when he was struck by a forklift being operated in reverse, suffering a fractured pelvis.",1
An employee operating a riding lawn mower at a commercial jobsite fell off the lawn mower. The mower blade then caused an amputation to his foot.,1
"An employee was leading a horse into a show ring when the horse spooked, pulled itself to the end of the lead, and kicked the employee in the stomach. The employee suffered an intestinal injury.",1
"An employee was handling rope attached to a machine. The machine was energized, drawing the rope across the employee's hand and amputating the tips of the index, middle, and ring fingers.",1
An employee stepped into the nose of a drop-frame trailer to cross to the other side. The open rollers caused him to lose his footing and fall. He suffered abdominal injury.,1
"A load lugger work crew was unloading a roll-off bin. An employee was removing a cable from the bin when the truck rocked backwards slightly. The employee's left leg was pinched between the tilted rails where the cables were attached, resulting in a fracture to his fibula and a laceration to his calf area. He was hospitalized, requiring surgery.",1
"An employee was clearing a deck of unlocking poles. The employee fell from a platform to a surface 8 feet below, suffering broken bones.",1
"An employee experienced heat stress while demolishing a brick façade, requiring hospitalization.",1
"An employee was dismantling a roofing truss on the ground when the truss became displaced and struck his lower left leg, fracturing it. He was hospitalized.",1
"Employees were installing a 25-foot steel column that had a hitch to a steel base plate. As they tried to put the base plate on the foundation with a telehandler, it slipped out of the nylon sling. The hitch struck an employee on the left lower leg between the knee and ankle, causing a compound fracture.",1
"An employee was cleaning the bottom lock area of a raised dump truck bed when a chunk of asphalt fell down the bed and hit him, fracturing his ankle.",1
"An employee was working in a robot area. His muscles began cramping in the morning and he was hospitalized that afternoon, suffering from heat stress.",1
An employee was offloading pipe using a 5-ton overhead crane. He was lowering a bundle that had been lifted off center and was using his left hand to level and balance the load when the chain sling slipped and his left hand was trapped between the chain and the pipe. He was hospitalized.,1
An employee was pouring a pre-cast member while standing on a concrete form. The employee fell to the ground 4.5 feet below and was hospitalized for a concussion.,1
"An employee was climbing down from a roof on a fixed metal ladder. The ladder broke from the wall and he fell 5-6 feet to the ground, suffering broken ribs and a head injury.",1
An employee was drilling holes with a core drill. The employee's right thumb was pinched between the drill handle and the adjacent equipment. The thumb was amputated.,0
"An employee was climbing an extension ladder. The ladder slid and the employee fell to the ground 4-5 feet below, suffering broken ribs and a closed fracture of the spine. The employee was hospitalized.",1
An employee missed the last 2 steps while descending from an A-frame ladder. She fell to the concrete floor and suffered a possible brain hemorrhage.,1
"An employee was loading a pallet onto a semi-trailer using a fork truck when his left arm was caught between the fork truck and the trailer, resulting in a fractured arm.",1
"An employee was doing preventive maintenance on a conveyor. The employee's shirt was entangled in the conveyor belt and roller, and the employee suffered four fractures to the left arm.",1
An employee that had been driving a forklift suffered a heart attack.,1
An employee was replacing a belt on a motor. The motor started and the employee's right middle fingertip was pinched between the belt and a pulley. The fingertip was amputated.,0
An employee was walking toward a counter in a store. A member of the public stabbed the employee in the back multiple times with a knife.,1
"An employee was walking away from a counter when she tripped on a wire. She fell, suffering a hip/pelvis fracture as well as elbow and head injuries. She was hospitalized.",1
A Rogers and Sons Concrete employee sustained a leg fracture at a construction site.,1
An employee was servicing a material handling kicker plate when it activated. The cylinder retracted and crushed his right thumb between the kicker framework and a conveyor belt. He suffered an open fracture to the thumb tip.,1
"An employee was removing a small strap coil band from an arbor by sliding off the uncoiler drum. The drum was still collapsing to allow the coil to be removed, and as it closed it crushed and broke the employee's right ring and little fingers.",1
"An employee was changing out the die on a pellet mill. When he spun the die, it caught his left-hand thumb, resulting in the amputation of 1/2 an inch of his thumb.",0
A spray can exploded on a conveyor line after getting jammed near a heat plate. Three employees suffered burns and one was hospitalized.,1
A maintenance employee was installing a light while standing on an 8 foot extension ladder. The bottom of the ladder kicked out due to a wet floor and the employee fell. He was hospitalized for a broken ankle.,1
An employee was cutting a piece of foam on a table saw. The material kicked back and the saw cut three fingers on the employee's left hand. The little finger needed partial surgical amputation.,1
"An employee tripped and fell while walking away from a residence, hitting rocks and the ground itself. The employee suffered a broken humerus and a laceration over the eyebrow.",1
"On August 25, 2020, an employee was operating a vertical band saw to cut meat when the employee's right hand made contact with the energized saw blade, resulting in an amputation to the right thumb tip.",0
"An employee was driving an ATV when it flipped over on him, causing broken ribs and a broken knee.",1
"An employee was using an ATV when it ran into some overgrown brush, then flipped back and landed on the employee. The employee suffered broken ribs and a broken knee.",1
"While taking out drywall and insulation, an employee began to feel ill and developed stomach issues. He was hospitalized, suffering from possible heat stress.",1
"An employee fell while installing metal roof sheeting, landing on the ground 41 feet below and suffering broken ribs, legs, and hips.",1
"A coater operator was working at a board machine, adjusting the coater wipe at the coater rolls. The rolls caught the employee's right forearm, crushing it. He was hospitalized and his right hand was surgically amputated.",1
"An employee was lowering a dock plate onto the rear of a trailer. Another employee stepped on the plate, causing it to pinch the first employee's hand. He suffered a fingertip amputation.",0
"On August 26, 2020, an employee was placing a sticker on a trailer in a yard when a tractor ran her over. She suffered a leg injury and was hospitalized.",1
"An employee was using an overhead bridge crane to pick up a bundle of steel rebar. As the bundle was clearing the bin pocket, it swung into the employee's right arm and hit it against a fixed piece of machinery. His arm was broken and he was hospitalized, undergoing surgery.",1
"An employee was hospitalized, suffering from possible heat-related dehydration.",1
"An employee was stepping off a ladder cart when she fell from the last step, landing on the tile/concrete floor and suffering a broken leg and possible broken hip.",1
"On August 26, 2020, an employee was cleaning an industrial mixer when a flash fire erupted within the mixer and burned the employee's face, neck, and hands. The cleaning process involves manually scraping a mixture of aluminum paste with petroleum distillate carrier. Isopropyl alcohol is then used to wash the mixer.",1
"An employee was on an extension ladder when it fell. The employee fell with it, and both landed on the ground two stories below. He suffered lacerations to the eyebrow and mouth and a broken nose.",1
"An employee was driving a forklift forward when she tried to move a dolly's break bar by pushing it with her arm. Her ring and middle fingers were then caught between the overhead guard frame of the forklift and the dolly's break bar, resulting in a ring fingertip amputation and middle finger laceration.",0
"An employee was unloading a treadmill from a truck using a dolly. The treadmill and the dolly fell on him, breaking a vertebra at the base of his neck. He was hospitalized.",1
"A 2,200-pound bulk bag of peanuts had fallen to a warehouse floor and come open. Employees were cleaning up when another bulk bag fell onto one of them, covering his entire body except for his head and feet. He suffered a broken femur and humerus, as well as head lacerations. He was hospitalized.",1
"An employee became dizzy and lost his balance while operating a press brake. While he was getting his balance, the press brake closed on his right hand, crushing the middle and index fingers.",1
"On August 26, 2020, an employee lost control of a stand-up forklift. The employee's leg became caught between the machine and a guardrail, causing the employee to sustain a broken left leg.",1
"On August 26, 2020, a temporary employee was operating a fork truck when it tipped onto its side, causing the overhead guard to land on the employee's left foot and break it. The employee was hospitalized, requiring surgery.",1
An employee had completed his shift and was preparing to punch out when he became disoriented. He later had a seizure and was hospitalized for heat exhaustion.,1
"On August 26, 2020, a delivery driver became dizzy after making a drop-off. He was hospitalized, suffering from dehydration.",1
An employee's left hand and arm were pulled into a net puller machine. The employee suffered an open fracture of the arm and was hospitalized.,1
"An employee was rolling a 1,500-pound metal coil. The coil tipped over onto the employee's left ankle, breaking it.",1
An employee became dehydrated and had to be hospitalized.,1
An employee was operating a dock plate when it partially amputated the employee's left middle finger.,0
An employee was cutting a ductile water line pipe to be replaced using a gas powered cut off saw. Something caused the saw to kick upwards and the body of the saw struck the employee's face causing fractures and a laceration. The employee was hospitalized.,1
"An employee was climbing a tree in order to cut it. His rope failed and he fell 45 feet to the ground, suffering a broken back.",1
"At 9:30 a.m. on August 26, 2020, an employee was cutting off fiberglass material that had wrapped around a roller on a production line. A chain and gear caught the employee's gloved-hand, causing a 3-millimeter fingertip amputation.",1
An employee was leaving a pallet area when a stand-up forklift ran over his left foot. He suffered a broken and dislocated big toe.,1
"An employee was scraping a grill after applying a chemical cleaner to it. The chemical splashed back and struck the employee's right hand, causing second- and third-degree burns.",1
"A UPS delivery driver returned to the UPS facility after a day delivering packages. She became ill, suffering from heat-related dehydration.",1
A veterinarian was drawing blood from a patient for a test when the dog pulled her arm and jerked it back. The needle went into the veterinarian's thumb about an inch. Her hand started swelling in the evening. She later went to the hospital for an infection.,1
"An employee was sitting on the liquid petroleum tank of a forward-tipping forklift, unloading a safe into a dumpster. The forklift tipped forward. When it tipped back to a neutral position, the employee suffered a lower back injury.",1
"An employee was using a meat slicing machine when his hand was caught in the machine, resulting in the amputation of three fingers.",1
An employee was cutting a flagpole with a demolition saw. The saw lacerated the employee's chest.,1
An employee sat down to take a break and had a seizure that was possibly heat-related and suffered a dislocated shoulder.,1
An employee was working outdoors in the lumber yard and building material orders. The employee became light-headed and had chest pain. The employee was hospitalized due to heat exhaustion.,1
"An employee was helping a crane operator move a valve off a pallet. The employee hooked up the valve by the shaft. When it was raised, the valve shifted and caught the employee's right index finger against the crane block. The fingertip was amputated.",0
An employee fell while walking down steps. The employee's right ankle was broken in three places.,1
"An employee was in a manhole, tending a ladder while a pipe plug was being deflated. The pressure inside the pipe caused the plug to pop out of the pipe and strike the access ladder inside the manhole. The ladder in turn struck the employee in the throat, causing a neck contusion.",1
"An employee was cutting 3/4"" x 2.25"" floorboards with a saw-stop table saw. While he was attempting to cut a plank, the board kicked back and struck his lower right abdomen. He suffered a perforated intestine.",1
"After performing maintenance-related tasks on a skid steer using a sledge for an hour and a half, an employee developed heat-related illness.",1
An employee developed muscle cramps after working on a rooftop. He was hospitalized for heat exhaustion.,1
"An employee was operating a powered pallet jack to pick orders when the jack struck a guardrail, tearing a ligament in the employee's right leg.",1
An employee received an amputation while removing paint buildup from inside a powder coating machine.,0
An employee's left hand was caught in a rolling mill. Two-thirds of the employee's middle and ring fingers were amputated.,1
"An employee was servicing an overhead light fixture when he received an electric shock that made him fall from an 8-foot ladder to the ground. He hit shelving as he fell, cutting his head. He also suffered a broken wrist and broken ribs.",1
An employee was using a tube cutting machine. The machine operated while his hand was inside a chute and amputated the tip of his finger.,0
"An employee was standing on a desk when it collapsed. As she fell, her mouth hit a metal bracket from the broken desk. She suffered lacerations to the inside and outside bottom lip, broken teeth, and a broken left foot.",1
An employee was cleaning up a solvent leak from a membrane skid in a manufacturing facility. A nearby heat gun caused fumes from the leak to ignite. The employee suffered second-degree burns to the hand and arm.,1
"An employee fell from a chain used to rope off the dock and landed on the floor 4 feet below, suffering injuries to the ribs, collarbone, and face.",1
"Two employees were throwing away a toilet in a dumpster. One employee's left middle finger was lodged between the toilet and the dumpster rim, resulting in an amputation of the fingertip.",1
A cat bit a veterinary technician's left hand. The wound became infected and she was hospitalized.,1
An employee was trying to unjam batteries on an assembly line. The employee's left index finger was pinched between the conveyor framework and the stopper. The finger was partially amputated.,0
"An employee was setting up a machine and feeding marking thread through the die to prepare for startup. The employee's right middle fingertip was crushed, resulting in a partial amputation.",0
"An employee was performing his routine job duties when he passed out, possibly due to high heat exposure. He was hospitalized.",1
An employee amputated two fingers while operating a slicer machine.,0
An employee was trying to remove a small piece of burning cotton from a cotton gin machine. The machine's saw amputated his finger.,1
"An employee was trying to reposition a resident in bed. The resident was pulling on the employee and hurting her, and she leaned back to get away from him. When he released her, she fell and lacerated the left side of her forehead on the leg of the patient's lift machine. She was hospitalized.",1
An employee tripped and fell while carrying a medication tray. She landed on the ground and suffered a broken left patella.,1
"An employee was working at a treatment facility construction site. A flatbed had transported a single platform about 1 mile to the site. The platform was strapped onto the flatbed and had wood blocks to keep it from moving. During the transport, one of the pieces of wood vibrated out of position. When the employee released the ratcheted straps, the tubular steel frame platform toppled over and off the flatbed. The platform struck and broke his left leg. He was hospitalized and had surgery.",1
"Two employees were driving a utility terrain vehicle when it slid on muddy soil and rolled over on an incline. An employee's leg was caught underneath the vehicle against the soil/mud. The employee suffered a compound fracture to the leg and was hospitalized, requiring surgery.",1
An employee was loading livestock into a cattle hauler when he began experiencing symptoms such as dizziness and lightheadedness. The employee took a break to hydrate and returned to work when he felt better. Later that night the employee went to the hospital with heat stroke.,1
"An employee was trying to replace the gasket on a pump before replacing the hose. When the employee tried to fully seat the gasket, the pump impellers amputated the tip of his finger.",0
"An employee was changing the drum brakes on a yard truck. As he used a pry bar to help install the upper brake shoe of the right rear drum, his left little finger was caught between the S-Cam roller and the brake shoe. The fingertip was amputated.",0
"An employee was using a hand vacuum to clean up tea powder around a machine. Her cleaning rag fell off the side of the machine into a coned-shape opening where bags of material were being cut. She tried grabbing her rag with her left hand, but the rag was caught and pulled by the machine. As she tried pulling the rag out, her left index fingertip was cut by the machine blades.",0
"An employee's knee gave out and she fell, hitting her head on a door frame. She suffered a head laceration and a broken right hip.",1
"An employee was stepping over a guardrail when it caught his shoe, causing him to fall to the cement floor. He suffered a contusion to the left kidney, a muscle strain in his shoulder/left upper arm, and a lower back strain.",1
An employee fell while trying to climb off a residential roof onto a fixed ladder attached to the service truck. The employee landed on the ground about 8 feet below and suffered a concussion and cracked vertebrae. Fall protection was not in use at the time.,1
"An employee was lifting a steel I-beam to be placed on a table when the I-beam slipped. The employee attempted to grab the I-beam and it fell on his index finger, resulting in a fingertip amputation.",1
"An employee was trying to start a pulley by hand when the pulley grabbed and pulled the employee's right ring finger between the pulley and belt, resulting in an amputation of the finger.",0
"On August 28, 2020, around 4:13 a.m., an employee was preparing to help unload a trailer at a loading dock. As the employee was traversing from the loading dock to the trailer, he missed the trailer and fell to the ground. He put his right arm out, which took the force of the fall and resulted in a fractured right wrist.",1
"On August 28, 2020, at 4:15 p.m., a United States Postal Service employee was on his route when he started to feel dizzy and lightheaded. He was hospitalized for heat-related illness.",1
"An employee had been driving a truck all day performing delivery activities in the heat. Near the end of his shift, he was hospitalized for heat exhaustion.",1
"After shoveling coke in heated conditions, an employee experienced dehydration and had to be hospitalized.",1
An employee was using a sheet metal bender. The machine amputated the tip of the employee's left thumb.,1
"On August 28, 2020, a forklift struck an employee's left foot, resulting in amputations to the big and second toes.",0
"An employee was using a miter saw to cut pine wood blocking stock. The wood stock was pulled into the sawblade, which amputated four fingers on the employee's left hand, also lacerating the thumb.",0
"An employee was stacking lumber coming out of a moulder. A bundle of MDF slipped off the front of a forklift, hitting the cart holding the lumber. The employee was pinned between the lumber and the moulder, suffering a broken lower left leg.",1
An employee was sanding the rough edge of a stainless steel sheet after a plasma cut using a 4.5 inch electric hand held grinder with a sanding disk when the employee's hair was caught in the tool's rotating assembly. The sanding disk cut the employee's left temple and the employee was hospitalized.,1
"An employee was moving a cart loaded with packages. His thumb was smashed between a metal I-beam and the cart structure, causing an injury that required surgery.",1
"At approximately 9:45 a.m. (CST), an employee was using a crane to move a piece of sheet metal. The piece of sheet metal became stuck on another sheet. The employee tried to free the piece of sheet metal with his right hand. When the piece of metal dislodged, it struck the employee's right ring finger and caused an amputation of the right ring fingertip.",1
"An employee was stepping out of a manlift while attempting to connect to a steel pipe when the employee fell 15 feet, suffering a fractured pelvis and lower back fracture.",1
"On August 28, 2020, an employee was affixing the D-ring of a pallet lifting device to the sling hook of an overhead crane when the crane's hook was raised. The employee's left thumb was caught between the crane hook and the D-ring, and the thumb tip was amputated.",0
"An employee was using a band saw to cut a block of wood when the wood became jammed. As he attempted to unjam the wood, the saw blade amputated a quarter inch of his left thumb tip (no bone loss).",0
"A temporary employee was helping with a bundle of steel when a vertical row of 7 pieces of 2"" tubing began to fall over. He reached out with his right arm to catch them, and when he pulled his arm back, his upper arm brushed against the end of one of the tubes, resulting in a laceration.",1
"An employee was shot by his former spouse (non-employee), suffering gunshot wounds to the chest and torso area, buttock, and leg. He was hospitalized.",1
"An employee was trying to repair an auger in a volumetric cement mixer when the employee fell 7 to 13 feet out of a raised bucket truck to the ground below. The employee suffered fractures to the elbow, resulting in surgery and hospitalization.",1
A forklift ran over and broke an employee's left foot as it backed up.,1
"On August 28, 2020, an employee was inserting vegetables into a food processing machine. Blades inside the machine's chute amputated two of the employee's fingertips.",0
An employee tripped and fell while cleaning shopping carts. Her head struck the floor.,1
"An employee was climbing a 20-foot extension ladder. He fell from 16 feet up; his head struck a beam before he landed on the platform below, and he briefly lost consciousness. He was hospitalized, having suffered four cracked ribs, a cracked pelvic bone, a concussion, and a broken hand.",1
"A census employee was shot in the leg, through a car door, while parked near a sample unit.",1
"An employee was operating a punch press. The press cycled and caught the employee's left ring finger, causing a partial amputation above the first knuckle.",0
"An employee had been setting long span girders, welding, and adding X-bracing in the gym area. The employee was hospitalized due to heat stress.",1
"An employee became ill after loading diesel onto a tanker trailer. He was hospitalized, suffering from heat exhaustion.",1
"An employee fell down a flight of stairs, suffering bruised right and left knees and a sprained ankle.",1
"A security officer was at a check-out gate, moving product inside a pickup bed, when a spider bit his arm. He developed a staphylococcus infection and was hospitalized.",1
"An employee was changing out dies on a hydraulic press brake. As the employee was trying to move the plastic die in the point of operation, the brake closed on the employee's left-hand fingers. The two middle fingers were later amputated to the knuckle.",1
"An employee was working from a ladder as part of a crew who were tearing off an old roof on a residential property. The employee missed a rung as he was climbing down the ladder and fell to the ground, resulting in a broken right wrist. He was hospitalized.",1
"An employee was performing concrete grouting when a nearby box truck hit a barrel, causing the barrel ring to fly out and hit the employee's left leg. His left shin broke, requiring hospitalization and surgery.",1
"Two employees were replacing a bearing on an acceleration belt roll. A 20-pound roll bearing fell to the ground, wedging one employee's right hand against the ground. The middle finger was amputated at the second knuckle, the index finger was lacerated, and the ring finger was crushed.",0
"An employee was preparing to reinstall a box chain that had broken. When he tried to rotate the drive belt manually (in order to straighten the chain and thus find its end), the chain shifted and the drive belt rotated in the opposite direction. His right ring finger was pulled in and trapped between the sheave and the V-belt. The fingertip was amputated.",0
"An employee fell in a produce cooler, hit his head, and sustained a broken nose. He was hospitalized.",1
"An employee was installing an impact table on the south side of a conveyor. The impact table was resting on the conveyor rail. When the employee attempted to move the table, it fell off the side of the conveyor frame and dropped down, crushing his left index finger between the conveyor frame and the top of the impact table plate.",1
"While switching a slurry strainer, an employee was struck by hot mash, receiving second/third degree burns that required hospitalization.",1
"An employee slipped and fell on a wet floor, suffering a broken hip.",1
An employee was using an abrasive wheel to sharpen a tool when the wheel shattered and lacerated his hand.,1
An employee was pulling film out of the can that has a vacuum on top that pulls the waste film off of the line. The fan blades lacerated two fingers on the employee's left hand. A fingertip was surgically amputated.,1
"An employee was on a utility pole, making repairs. An electric power line shocked the employee.",1
A temporary employee had an allergic reaction after being stung by a bee and was hospitalized.,1
"An employee slipped on the last step while walking down stairs, landing on the ground and suffering an injured right knee and a broken pelvis.",1
"A hospital bed collapsed during a motor change, causing a severe laceration to an employee's left hand. The injury required surgery and hospitalization.",1
"An employee was setting up a drill press. The employee's shirt and hair were caught in the drill bit, causing injuries including a right ear injury, a broken left pinky finger and scalping.",1
"An employee fell while walking down a hallway, breaking her left hip.",1
"An employee fell while walking down a hall, breaking her left hip.",1
"An excavator load struck an employee. The employee was knocked over onto a steel diaphragm, which caught the employee's leg and pinned it as the employee continued to fall. The leg was broken.",1
An employee was backing a stand-up reach truck into an aisle. His left thumb was pinched between a load beam and the truck.,1
"An employee fell from a ladder to the floor about 9 feet below, suffering a broken wrist and a lacerated kidney.",1
"An employee was securing a load on a tractor trailer. He fell to the ground, suffering a broken hip. He was hospitalized.",1
"An employee was installing plywood/decking in a residential barn's attic. The employee fell to the ground about 14 feet below, suffering injuries to the back and arm, and was hospitalized.",1
"A Tree Wizard, Inc., employee was helping remove a tree that had struck a power line. When he made the final cut on the tree, the line rolled under the log and struck him in the face. He suffered a fractured eye socket, a fractured skull, and multiple facial lacerations.",1
An employee was manually unloading sections of counterweight pipe. Each pipe had swiveling D-rings mounted on the ends to be used for lifting the pipes with slings. The employee's finger got caught between a D-ring and a pipe resulting in a partial finger amputation.,0
An employee had just stepped off a step ladder onto the floor when he caught his foot in a grated section of the floor and fell. He suffered an ankle injury and was hospitalized.,1
An employee was cleaning a meat grinder when the auger caused partial amputations to three fingers on the employee's right hand.,0
"An employee was driving a motorized pallet jack. The jack struck a stopped maintenance cart, and the employee's left ankle was crushed.",1
"On August 31, 2020, an employee fell while walking up the three steps on a pop wrap machine. His head and shoulder struck the floor and he suffered a scalp laceration, a head contusion, and a fractured shoulder. He was hospitalized.",1
"A forklift rolled backward over an employee's leg, causing fractures to the femur and the lower leg.",1
"As a forklift backed out of a trailer, a strap on the trailer's wall caught the steering wheel of the forklift, causing a collision. The forklift's seat slid forward, and the drive suffered a broken right tibia and fibula.",1
"An employee was walking across the manufacturing floor when a forklift ran over the employee's foot, breaking it. The employee was hospitalized and required surgery.",1
"An employee was lifting a portable generator out of the back of a truck with the help of another employee. The generator fell and the employee's left thumb was pinched between the frame and lifting handle. When the employee pulled his hand back, the tip of his left thumb was amputated.",0
An employee's hand was caught and lacerated by the blade inside a hopper box. The wound became infected.,1
"An employee was feeding meat into a meat cuber when the employee's gloved fingers were pulled into the meat cuber, resulting in an amputation of the left index finger.",1
"An employee cut the strap on a bundle of lumber and it collapsed on him, breaking his hip. He was hospitalized.",1
An employee's right thumb was caught between a turnaround conveyor and a product guiderail. Half an inch of the thumb was amputated.,0
"On August 31, 2020, an iron worker was installing a steel wall curtain while attached to the steel wall curtain approximately 12 feet from the ground. The steel wall curtain was on an overhead crane and employees were making ties at certain points. When the steel wall curtain was released by the crane it overturned and the iron worker was either struck by the steel wall curtain and/or struck an air compressor that was on the ground where he fell. The employee was hospitalized for fractured ribs.",1
"An employee was on an ATV, monitoring plants and endangered species on a remote road. The ATV hit a rock and the employee fell off; the ATV then tumbled over the employee, who suffered a sore right leg, a sore lower back, and a spleen laceration.",1
"An employee was operating a machine that worked with extruded plastic. The grinder attached to the machine became clogged and the employee stopped the machine to unclog the grinder. As he was clearing the jam, the grinder motor was still winding down and the still rotating blades inside the equipment amputated multiple fingers.",0
"An employee was using a handheld grinder to cut an angle iron when the cutting blade became trapped between two pieces of metal and jumped back, cutting his right index finger to the bone. He was hospitalized and had surgery.",1
"An employee was cleaning a meat slicer in the kitchen area that was powered off when his left middle finger struck the blade, resulting in a partial finger amputation (skin only).",0
"On 8/31/2020, a Noble Casing, Inc., employee was on location performing rathole operations. A nearby skid steer operator was unloading a joint of pipe from a trailer and had the pipe elevated while backing to clear the bunks. The pipe then slid off the skid steer forks and trapped the employee between the pipe and trailer. The employee suffered a dislocated left elbow, broken left femur, single vertebra fracture, and bleeding in the brain, requiring hospitalization and surgery.",1
An excavator's track caught an employee's left leg as the excavator backed up.,1
An employee's left middle finger was pinched in the dust collector of a mixer. The finger was partially amputated.,0
"A customer punched an employee, who hit his head on the ground (causing contusions) and lost consciousness.",1
"An employee was cutting a two-by-four with a powered circular saw. The wood pinched the blade, causing the saw to kick back and amputate the employee's right little fingertip.",0
"An employee fell while climbing down a 5-foot A-frame ladder, landing on the ground and suffering a broken right lower leg.",1
"An employee tripped over uneven sidewalk pavement and fell onto steps, suffering a broken left arm.",1
"An employee was doing masonry work from a scaffold. A board dislodged when the employee stepped on it; the employee fell through the scaffolding to the ground about 12 to 15 feet below, suffering a head injury requiring staples, a left leg injury that required stitches, and a broken/sprained foot . The employee was hospitalized.",1
"An employee fell while climbing down an A-frame ladder, landing on the ground about 3-5 feet below and suffering broken vertebrae.",1
An employee's right middle finger was amputated above the knuckle by the blade inside an edge band trimmer.,1
"Material was being loaded in a metal building laminating machine. The machine's saw blade came off, cutting an employee's foot.",1
"An employee was turning a motorized pallet jack. The employee's left hand came into contact with steel shelving, which severed the employee's left little finger. The employee was hospitalized.",1
"An employee was climbing onto a frack pump. He fell to the ground about 5 feet below, suffering a broken arm.",1
An employee was operating a pneumatic press when it crushed his right middle and ring fingers.,0
An employee started exhibiting signs of heat exhaustion and was hospitalized.,1
An employee was helping another employee replace a fire hydrant. After lunch the employee became ill. The employee was hospitalized for heat exhaustion.,1
"An employee was repairing a bucket loader in a maintenance shop. A jack kicked out, striking him in the head and knocking him to the floor. He suffered a skull fracture.",1
"An employee was handling pieces of flat steel bar when they fell on his foot, crushing the foot and causing a laceration.",1
"An employee was rolling pipe by hand on jack stands when a section of pipe rolled off the jack stands. The pipe pinned the employee's right hand and amputated the ring, middle, and index fingers.",0
An employee was operating a punch press when the press came down on both of the employee's hands. The employee sustained the amputation of three fingers on each hand.,0
An employee tripped over a box of tiles while walking down an aisle. She suffered injuries to the right wrist and left knee and was hospitalized.,1
"An employee was moving sows. As he moved through a doorway, the wind caught the door and slammed it shut on his right middle finger. He suffered a partial amputation of the last joint.",0
"An employee was working on the wind farm and received an electric shock from a cattle gate. He was hospitalized, suffering from dizziness and a low heart rate.",1
"An employee  was moving drums in the bed of a pickup. He fell from the tailgate, landing on his back and striking his head on the concrete ground. He suffered a contusion to the back of the head and bleeding in the brain.",1
"At approximately 4:00 p.m. on September 1, 2020, an employee was closing a delivery truck door after unloading it. The truck pulled away and the employee jumped down to the ground between the truck and the dock. She was hospitalized.",1
An employee was going down stairs at the end of her shift when she fell and broke her ankle. The employee was hospitalized.,1
A mechanic was performing maintenance on an exhaust blower when his finger got caught in a belt/pulley. The employee's fingertip was amputated.,0
"An employee had climbed on a tire to change a windshield wiper blade when the employee slipped and fell to the ground, resulting in a head injury that required hospitalization.",1
"At around 4:40 AM, two employees were hooking up an air compressor to the back of a pickup truck. Due to wet weather, the injured employee's hand slipped, causing the end of the compressor to fall, pinching his left middle finger between the arm of the compressor hitch and the top of his boot. The employee sustained a partial amputation of the middle fingertip.",1
"The injured employee was helping another employee change the propane tank on the dock sweeper. The tank was leaking and when the injured employee tried to start the sweeper, a large flame burned both of his arms and legs.",1
"An employee was charging an aluminum furnace by adding a solid aluminum ingot into the molten aluminum bath. When the ingot was added, an explosion occurred and the employee sustained burns to multiple parts of the body.",1
"An employee was observing the patient monitors and experienced an allergic reaction, possibly caused by the cleaner that is used on the monitors.",1
An employee working as a cashier near the drive-thru window experienced heat exhaustion and collapsed while walking to the walk-in cooler. The employee struck their head during the fall which resulted in a concussion and seizure.,1
An employee was returning collected garbage to the lay-down site at the end of his shift when he  started cramping up. The employee was taken to the hospital where he was treated for dehydration.,1
"An employee was lining a hydraulic cylinder up with the eye (opening). The hydraulic cylinder was attached to a 300-pound crush plate and was supported by a pry bar. The pry bar slipped out and the cylinder dropped, pinching his right middle finger and causing a fingertip amputation.",0
An employee was preparing to remove a film roll from a chuck. The roll was pulled and the first employee's right index finger was caught between the roll and a cradle. He suffered an amputation to the finger.,1
"An employee was cleaning around a blower machine and noticed labels stuck inside. She was attempting to remove the labels when her left index finger was caught in the belt and pulley, resulting in a fingertip amputation.",0
"An employee was placing a post to support a stair landing when he lost his balance and fell to the ground, injuring his side and right arm.",1
"On September 1, 2020, at approximately 8:00 p.m., an employee was working on conduit for a new installation from the platform of a scissor lift that was not yet elevated when it came in contact with (and was dragged by) a rotary dryer. The employee was crushed between the scissor lift and the rotary blower, suffering fractures on his mandible, clavicle, and right orbital bone. He was hospitalized.",1
"An employee was greasing the chain on a machine when the lubricating hose of the grease device became caught on the chain and sprocket, pulling the employee's right hand into the chain and sprocket. As a result, the employee's right index fingertip was amputated.",0
"After making a delivery to a customer's address, an employee began to feel pain in their lower back due to dehydration.",1
An employee was mopping the floor when she slipped on the wet floor and fell. The employee sustained a broken femur.,1
"An employee was walking into a filler room and started to step up on the threshold of the door but he slipped and fell, landing on his knee. He was hospitalized and required surgery for a broken left kneecap.",1
"An employee was on an H-pile in the center span of a bridge, walking towards the pier cap to retrieve his water bottle. The employee went to step up and stumbled onto rebar which impaled him.",1
"On September 1, 2020, at around 10:00 AM, an employee was pulling wire. He had a hoist on the conductor. As he was pulling slack, his hand slipped off the handle and the handle hit him in the face. The employee sustained swelling to the eyes and nose.",1
"While standing on a step stool to clean a mirror, an employee fell backward onto a hard surface and suffered a back injury.",1
"On September 1, 2020, at approximately 10:00 a.m., an employee was getting ready to clean hot water and resin from a strainer when a bolt became loose as he was standing over the system. He was then sprayed with hot material through the cap on top of system. He received first and second degree burns on his right and left thighs, lower body, right and left arms, abdomen, chest, and left ear and was hospitalized.",1
An employee was removing lime from the interior wall of a holding tank while working from a baker-style scaffold. A section of lime fell and struck the side of the scaffold causing it to tip over. The employee fell to the ground approximately 5 feet below and sustained fractures to both wrists.,1
A temporary employee was wiping/cleaning a conveyor belt in the blending room when her right arm got caught between the rollers and the belt. The employee sustained a fracture to the right forearm.,1
An employee had dropped a roll of change by the pizza cabinet and bent down to pick it up. While standing back up he struck the back of his head on the bottom edge of an open drawer and sustained a laceration/contusion.,1
An employee was driving a pallet mover around a corner in the warehouse when she fell off the mover and was dragged by the mover and then crushed against nearby racking. She sustained abdominal injuries.,1
"An employee was using a grinder to modify a 10"" pipe when the grinder kicked back and lacerated the employee's upper thigh.",1
An employee was on a work platform located on the second level of a printing press when they slipped and fell backward onto the working surface. The employee sustained a back injury.,1
An employee was cutting a board on a table saw. The board kicked back and the employee's right ring finger was partially amputated by the blade.,0
"An employee was putting a bend channel in a sheet of metal using a press brake. The brake actuated and the sheet metal rose up against the brake die, smashing the employee's fingers between the brake die and the sheet metal. The employee suffered a partial amputation of the left middle finger at the last joint.",0
"After working with 2-by-4s in direct sunlight, an employee became overheated and started cramping. The employee was hospitalized, suffering from heat exhaustion and dehydration.",1
"While working from an aerial lift, an employee came into contact with an overhead energized line. The employee was shocked and suffered a burn to the hand.",1
An employee was using a stressing jack when hydraulic fluid blew through a pin hole in the hydraulic hose of the jack and entered his left-hand palm.,1
An employee was replacing a bearing. The employee was using an air chisel to help remove the bearing from the brace when a piece of metal broke off and struck the employee's right eye.,1
"An employee was performing preventative maintenance on a medium volt switchgear. The employee began to wipe the area with a rag and sustained an electric shock (13,800 volts) to the left arm. The employee was hospitalized and has second degree burns on six percent of their body.",1
"An employee was changing a heat print ribbon when the print wheel was lowered onto the wire. The rolling wheel crushed the employee's left index finger, causing an open tuft fracture.",1
"A mechanic was servicing a vehicle. As he moved the grating to the underside of the car, his finger got caught in the grating. The fingertip was medically amputated.",0
"On September 2, 2020, an employee was sliding up an interactive whiteboard when it detached from the wall. It fell about 3 feet and knocked the employee to the ground. She suffered a broken hip and/or femur and was hospitalized.",1
"An employee was operating a meat tenderizer machine, feeding small pieces of beef into the machine from the top opening. The machine became jammed with product and the employee suffered a partial amputation of the right ring finger while trying to clear the jam.",0
An employee was leaning over the laser sensors using his finger to check that a part was not rotating in the pipe bending machine when he slipped and fell into the clamp on the machine. The employee's right index fingertip was amputated.,0
"While walking across the parking lot, an employee tripped on a section of raised asphalt and fell to the ground. The employee was hospitalized with a fractured upper right arm.",1
An employee was lifting boxes weighing 27.8 lbs. to stack on a pallet and suffered a back strain.,1
An employee was clearing a jammed piece of cardboard packaging from a machine when the cutter engaged and amputated her fingertip.,0
A temporary employee was guiding the mult coil (over 2000 lbs.) that was being placed onto the uncoiler machine with a crane. The employee was standing behind the mult coil while the crane operator maneuvered to position the load onto the uncoiler machine. The crane operator was not able to position the mult coil onto the uncoiler machine so it was placed back on the ground. It was unbalanced and fell. The employee was struck by the mult coil and fell to the ground. In the process the employee's right hand was caught between the mult coil and uncoiler machine and crushed. The employee was hospitalized for surgery.,1
When an employee turned the control on the robotic extruder machine to auto the sensor on the gate malfunctioned and allowed the robot to operate. The robot swung and hit the employee on the right side causing broken ribs and a punctured lung.,1
An employee was unloading a trailer. The employee was pulling a pallet jack out of the trailer when it went onto their left foot resulting in the amputation of a toe.,1
"A UPS driver became ill after completing his work day and was hospitalized, suffering from heat stress.",1
A utility van door closed on an employee's right thumb. The employee was hospitalized.,1
An employee was feeding paper into the plate machine when his left index finger was caught in a pinch point and the fingertip was amputated.,0
An employee was working in the fabrication shop when he tripped and his left arm struck a piece of sheet metal. The employee was hospitalized and had surgery for a severed artery and tendon in his left arm.,1
"An employee was working in trench when one side of the trench caved in, pinning the employee under the soil. The employee sustained a broken wrist, dislocated jaw, fractured collarbone, and broken ribs.",1
The owner and an employee were standing on the ground as wooden roof trusses were being prepared to be reset in the correct position. The trusses fell in a domino effect on top of both. The owner was hospitalized for a fractured leg and a head laceration. The employee was hospitalized for fractured legs.,1
"An employee was working on the first floor of a residential home when sheet rock from the second floor fell on the employee's foot, crushing it.",1
"An employee was carrying a large stock pot of hot water from the stove to the sink when he lost his balance, slipped, and fell. The hot water spilled on and burned his body.",1
An employee was restraining a dog when it bit the employee's left arm.,1
"On 9/02/2020, at 12:10 PM, an employee was picking a case in an aisle behind a high-lift forklift. The forklift backed up and caught the employee against the rack. The employee was hospitalized with broken ribs.",1
An employee was overcome by heat while working on an aluminum sow production line.,1
An employee was cleaning a noodle jam on a conveyor. Her left ring fingertip was caught between the conveyor belt and the transfer plate and amputated.,0
"An employee was operating a reach truck. As the employee steered into an aisle, the reach truck was headed for a rack and the employee jumped off the truck. His left leg was pinned between the truck and the rack, resulting in hospitalization for a broken left leg that required surgery.",1
"An employee tripped over a grocery cart's wheel and fell to the floor, suffering a broken right hip.",1
"An employee was stepping off a forklift. The employee's left foot was crushed between the forklift and a railing, and the little toe was amputated.",1
An employee was assembling a mobile container that was to be used as an office. Employees were lifting the second half of the container when it fell on the injured employee. The injured employee's leg was pinned to the ground resulting in a right leg fracture.,1
An employee was performing work on a bridge from a platform that was elevated by a crawler crane. The platform got entangled and the employee was caught between the bridge and the platform. He sustained a crushing injury requiring amputation.,0
"An employee returned to the scale house after dumping at the landfill. He parked his vehicle on the ramp. As he stepped out of the truck, he missed the ramp and fell onto the concrete sidewalk. His left hip fractured.",1
An employee began having stomach pains while tossing packages on a conveyor. The employee was later hospitalized with a hernia.,1
"Employees were turning a well back on. An employee was standing next to a tester when a flex line failed under pressure and blew, striking and fracturing the employee's left collarbone and jaw.",1
"An employee was moving office furniture. The employee's right middle finger was caught between a cabinet and a pallet, and the fingertip was amputated.",0
"An employee was cutting PVC pipes with a chop saw. The saw cut off the tip of his right middle finger (with no bone loss) as he was readjusting the pipes. He was hospitalized, undergoing surgery.",1
An employee was hitching a trailer to a truck. The trailer rolled and the hitch fell onto the employee's foot and amputated a toe.,0
"While delivering groceries, an employee begin to feel light headed and dizzy. The employee was hospitalized for heat related illness.",1
A scaffold frame was being moved from one location to another when it fell onto an employee's foot and fractured it.,1
An employee suffered a broken finger when a steel drum fell on his right ring finger.,1
"An employee was testing a three-way actuated valve assembly. When the ball cycled, it closed on the employee's left hand, amputating the tips of his middle and ring fingers.",1
"An employee fell while cleaning animal cages, suffering a cut to the back of the head. The employee was hospitalized.",1
An employee was cutting a 4x4 section of lumber with a radial arm saw. The lumber kicked up and pushed her hand towards the saw blade. The employee sustained a laceration on the left pinky and middle fingers and injury to the left ring finger requiring amputation.,0
"An employee was brushing the inside of a cooker. The lid of another, nearby cooker came open; hot peanut oil and steam sprayed out and caused second-degree burns to the employee's arms, neck, and face.",1
An employee was loading bagels from a table when his finger got stuck in the gap between work tables. When he pulled away he sustained a partial amputation of the left middle finger.,1
"An employee was on a flatbed truck and was using a center-mounted conveyor belt. As the employee was loading a cube of foam insulation onto the conveyor belt, the cube rolled back onto the truck. The employee stepped to the side to avoid the cube and fell 52 inches off the truck to the ground. The employee sustained a broken right leg and a bruised right shoulder.",1
"An employee was using a bandsaw to trim ribs. The saw cut his left hand, amputating four fingers.",0
An employee was placing traffic cones at a construction site and was stung by an insect. The employee suffered an allergic reaction.,1
An employee was performing maintenance work to change/inspect a belt on a blower motor. The employee was removing/inspecting the v-belt from a motor/fan drive sheave and as he was rolling the belt off the sheave his left ring finger got caught between the belt and the sheave resulting in a fingertip amputation.,0
An employee was running a re-winder machine when the speed of the machine increased. The employee then slowed down the speed and also tried to stop the re-winding process. The employee's arm was pulled into the printing press resulting in a fracture to the forearm.,1
An employee fell onto pavement from an unknown height and hit her head. The employee was hospitalized with head injuries including bleeding from the brain.,1
"An employee was accessing the chipper conveyor via the sliding door. The employee grabbed the left sliding door with both hands. As he slid the left door open, he pinched his left middle finger between the left door and the right door. The employee suffered an amputation of the fingertip.",0
"An employee was walking in the hallway, slipped and fell. The employee sustained a head injury.",1
An employee was using a pneumatic nail gun to build wood pallets when their left thigh was impaled by a nail.,1
An employee was cutting wood with a foot-operated knot saw when his hand caught on a splinter and was pulled toward the saw. The employee suffered a laceration to his left-hand middle finger and amputation of the tip of his left-hand index finger.,0
"An employee fell from a pull-down ladder at a house, landing on the ground and suffering a head injury.",1
An employee was working a bag machine (filling station) when his left index finger was caught in a chain and sprocket. The fingertip was partially amputated.,0
"The injured employee was assisting another worker at ground level to rig pieces of precast concrete. The injured employee experienced chills, dizziness, and thirst and was hospitalized with heat exhaustion/dehydration.",1
"An employee tripped while stepping down from his truck. He fell to the cement ground and hit his head, suffering a concussion.",1
An employee was making repairs on a jacket line using a forklift. The employee's left thumb was caught between the forklift's forks and a clamp. The thumb tip was amputated.,0
An employee was moving a steel coil when he was struck by the moving coil and became momentarily pinned against a stationary coil. The employee was hospitalized with a crushing injury.,1
"On September 3, 2020, an employee was working on the roof's edge attempting to insert a rivet while installing gutters. A high power electrical line was located about 2 feet from the edge of the roof where the employee was working. A power surge caused the power to jump off the line entering the employee's head and exiting through his right arm.",1
An employee was being trained on transferring acid from one tanker truck to another. He was connecting hoses and fittings between the trucks when nitric acid from the open end of one of the lines splashed onto his right arm. The employee was hospitalized for third degree chemical burns to 2.5% of the employee's right arm.,1
An employee was framing using a nail gun. The nail gun fractured bones in his right hand.,1
"An employee exited the cab of a cab-over style front-loading waste truck before the truck had come to a complete stop. When his foot came in contact with the ground, the employee lost balance and fell. The passenger side front tire ran over his left heel and right foot. The employee sustained a fracture and degloving injury to his right foot and a laceration to the heel of his left foot.",1
An employee was attempting to cover the feed trailer with a tarp. The employee slipped and fell to the concrete slab and fractured their pelvis.,1
An employee left his area of the aircraft carrier after lunch and was noticed stumbling and moving side to side as he walked. The employee sustained heat stroke and an acute kidney injury.,1
"An employee tripped and fell to the floor near a fry station, suffering a broken left hand, left arm, left hip, and femur.",1
"An employee was pushing a hand truck through a freezer entrance. He slipped on ice and the cart crushed the fingers on his right hand, severing fingertips.",1
"An employee had been operating a forklift. While releasing a dumper trash hopper into a dumpster, the employee's finger became trapped in the base of the trash hopper. The left index fingertip was amputated.",0
An employee had been preparing a grave site. He collapsed due to heat exhaustion and was hospitalized.,1
"On September 4, 2020, an employee was performing sanitation duties on a horizontal auger when their left arm became caught in the auger. The employee sustained an amputation to the left arm above the elbow.",0
An employee went to change the laundry in a client's home and slipped in 3 inches of water that had leaked from the client's washer. The employee sustained a broken ankle and foot.,1
"An employee missed the first step of a two-step ladder and fell 9 inches to the floor, sustaining two broken ribs and a head injury. The employee was hospitalized.",1
"After making repairs to an air conditioning system, an employee was testing the system and sustained a 460-volt shock. The employee was hospitalized with burns on the left pinky finger and internal burns in the shoulders.",1
"An employee slipped on a wet floor and fell, fracturing his hip. The employee was hospitalized.",1
An employee was using a band saw to cut oxtails when their right index finger contacted the blade resulting in a partial amputation.,0
An employee was cleaning a brick machine when their glove was caught in a chain/sprocket assembly. A finger was partially amputated.,0
"An employee was removing electrical conduits and a junction box from the exterior of a building. While on a 12-foot A-frame ladder, the employee removed the cover from the junction box and was loosening the anchor bolts within the empty junction box when the entire box and six conduit pipes broke free from the wall and struck the ladder. The ladder tipped over and the employee fell approximately 9 to 10 feet onto the asphalt ground, breaking his ankle. The conduit pipes then fell on him. The broken ankle required surgery.",1
"An employee stepped onto a box that was on a pallet in order to scan items on a top shelf. The employee lost balance and fell to the floor, sustaining a right leg injury.",1
An employee was caught between a moving tractor and a towed planter. He suffered broken ribs and contusions to his feet.,1
An employee was straightening a stack of glass sheets when a piece of glass lacerated his left wrist.,1
"An employee was standing next to a golf cart when it was struck by a high lift fork truck. The golf cart then struck the employee in the upper thigh, causing internal bleeding and possibly deep bruising.",1
"An employee was using a towel to dry tire rims on a vehicle that had just exited the car wash. After stopping at the bump stop, the vehicle began to slowly roll backwards. When this occurred the employee's right ring finger became stuck in the tire rim and  amputated above the first knuckle.",0
"An employee was changing a forklift battery. When the battery was dropped, the employee's left ring finger was caught between the battery and the battery box and amputated.",0
An employee was feeding wood stock into a table saw and sustained an amputation injury (bone chip) to their left thumb.,0
"On September 4, 2020, a welder operator was training a new employee on how to operate a robotic welder. The machine actuated while his left hand was in it, resulting in a partial amputation of the little finger.",0
An employee was clearing some plastic caught in a conveyor and auto wrapping station. A roller cut off the tip of his right index finger.,0
"An employee was positioning storm drain grates on the back of a truck. A grate dropped on the employee's left hand, amputating the little finger below the first knuckle.",0
"An employee was driving a forklift when the forklift impacted with a stationary forklift, leading to a crushed forearm.",1
An employee was tacking metal deck and fell 18 feet through the metal deck roof. The employee sustained injuries to his pelvis and right arm and facial lacerations. The employee was hospitalized.,1
"At around 2:00 AM, an employee was troubleshooting low suction on a housekeeping vacuum system. The employee was clearing a blockage when a rotary valve in the chute under the dust silo hopper closed and amputated his right index fingertip.",1
A delivery driver was investigating a jammed loading dock door at a store when the door came down onto his finger and amputated the fingertip.,1
"An employee fell from a 10-foot ladder to the ground, landing on his right side and suffering a broken right elbow, wrist, and forearm.",1
"An employee was manually adjusting a block of frozen product on a conveyor, when his right middle finger was caught between the block and the frame causing a fracture and laceration to his right middle finger that required surgery.",1
"While carrying trash to a dumpster, an employee slipped on mud and fell to the concrete. The employee suffered a broken humerus.",1
"An employee was operating a loaded pallet jack. While exiting a trailer onto an elevated dock lift, momentum from the load caused the front wheels to go off the dock lift. The employee then jumped, or fell off, and sustained a bruised knee.",1
An employee was loading a van for delivery when his arm was caught by the back of a box truck operating by the side. The employee suffered an arm fracture and was hospitalized.,1
"An employee was adjusting the height of the landing gear leg on a trailer. The employee's left index finger was inside the pin hole when the leg slipped, amputating the fingertip.",0
"While wrapping a bundle of board games on a pallet an employee jumped up to tap a box into position. The employee landed on their feet, but fell to the concrete floor and sustained a broken right femur and was hospitalized.",1
An employee was using an electric grinder when it cut the employee's left forearm.,1
"An employee was walking on a scaffold plank when the plank shifted or collapsed, causing the employee to fall 20 feet to the ground. The employee suffered a fractured shoulder and compressed back disks.",1
An employee was bitten by a rattlesnake while pulling grass out of a rock border.,1
An employee was cooking beans and suffered burns to the stomach area.,1
"On 9/5/2020, at approximately 10:40 a.m., a Lowe's employee was making a delivery at a customer's home. The employee had positioned a washer on the lift gate of the delivery truck and was attempting to step around the washer when he fell off the lift gate, which was raised several feet off the ground. As the employee fell, he grabbed the washer and pulled it down on top of him. The washer landed on his abdomen. He was hospitalized with fractured ribs, a fractured C7 vertebra, and a head injury.",1
"On the morning of 9/05/2020, an employee was using a water jet machine to clear a plugged sewer line. Around 11:48 AM, the jetter nozzle struck an obstacle in the line that caused it to change direction back toward the sewer line opening. Once the nozzle reached the opening of the manhole, the backjets sent the nozzle up the manhole. The nozzle struck the employee in the torso, knocked him over, and got caught in the clothes around his torso while still under pressure. The employee sustained puncture wounds from the pressurized water and was hospitalized.",1
An employee was operating a panel drill when their free hand became trapped by the drill when it lowered. The employee required surgery to repair broken fingers and a nicked artery.,1
"On 9/06/2020, a spud barge with an excavator was tied to a deck barge by two steel cables around timber heads, one forward and one aft. As the excavator was removing rock from the deck barge, the deck barge began to sway, creating more tension on the aft cable. At 1:00 PM, the cable slipped over a timber head on the spud barge, released, and struck an employee on the spud barge and propelled them overboard. The employee was hospitalized with fractures to the left hand.",1
"An employee had just finished repurposing chickens on a white tray that was sitting on the right side of a scale. He was moving the tray and stepping from the right to the left side of the scale when he twisted his left foot, heard a pop, and fell to the floor. He was hospitalized with a broken bone under his kneecap.",1
"An employee was cleaning the exterior of a tank. While moving around the tank, the employee slipped into an uncovered trench drain 15 inches deep. The drain was clogged and full of margarine and hot water. The employee fell in a seated position with her feet in the drain. The employee was hospitalized for burns.",1
"An employee had placed a package on a pallet and was returning to their position on the line when they tripped on the pallet and fell to the floor. The employee sustained a fractured left humerus, requiring hospitalization and surgery.",1
"While making a client's bed, an employee tripped over the foot rest of a wheelchair and fell resulting in a broken hip. The employee's shoulder and knee were also injured.",1
An employee was using a meat slicing machine. The blade amputated the palmar surface of his right fingertip.,0
"Company employees were onsite, cutting and dismantling components of the ammonia system in preparation for demolition. An employee was exposed to ammonia when he cut a line that still had ammonia left in the pipe. The employee was hospitalized due to respiratory system problems.",1
An employee slipped and fell. The employee was hospitalized.,1
An employee was draining gas from a scrubber when a fire erupted and burned the employee's face and hands.,1
"Employees were loading a truck with ammonium hydroxide. A transfer line ruptured, spraying an employee. The employee suffered chemical burns to the face, neck, and chest area.",1
"At about 5:45 a.m. on September 7, 2020, an employee tripped and fell in a hallway, striking her head on the floor. She suffered a head injury, a bruise to the right elbow, and a skin tear on the finger. She was hospitalized.",1
An employee was working on the band side of a tire machine. The employee removed the empty A-frame and was pushing in the next A-frame when the top roll came back and pinched their hand between the adjustment nut of the top roll and the frame of the equipment. Half of the employee's left middle finger was amputated.,0
"An employee was working with an unsteady patient who began to fall. As the employee attempted to catch the patient, the employee strained their back.",1
"A maintenance technician was troubleshooting a heat transfer fluid (HTF) motor failure on the production line. While the motor was being removed, the technician was sprayed with hot HTF, resulting in burns to the hands, arms, and torso.",1
A graduate student was performing an experiment under a fume hood. Fumes from the acetone and the ether the student was using ignited and the employee suffered second-degree burns to the torso and hands.,1
"On 9/07/2020, an employee was sitting at her desk. When she stood up to leave the desk, her left knee became entangled in computer wires. The employee fell and was hospitalized with a swollen knee.",1
"An employee was having lunch and walking around a table when she tripped over the table and fell, sustaining a broken hip.",1
An employee was troubleshooting a leak from a hydraulic line when high pressure hydraulic fluid penetrated the skin on the employee's finger. The employee was hospitalized.,1
An employee was pumping a hydraulic actuator when a concrete panel fell on the employee causing scrapes on the right side of the employee's back and the right ankle.,1
An employee was working with a crane when a bolt broke and the cheek plate fell off and struck his left leg. His leg was fractured in two places and required surgery and hospitalization.,1
"An employee was putting bottles in boxes on a production line. A carton became lodged in the taping portion of the carton erector. He was trying to unjam the carton when it ripped, causing his right hand to pass over the cutting mechanism and the protective cover on the cutting blade to pull back. The blade cut off the tip of his middle finger.",0
"A crane was moving a load of sheeting. The load dropped, hit an elevated sand bank, and then struck an employee on the pelvis and pinned him. He suffered two broken vertebrae.",1
"An employee was in a parked golf cart. He placed his feet on the ground beside the golf cart and grabbed the side of the cart to prepare his body to stand. As he stood up, he felt a pop in his right leg and fell over onto the ground. He was hospitalized with a broken femur in his right leg. His leg had a weakened bone due to a prosthetic from a previous amputation he had suffered.",1
An employee was working on a flat roof and began to feel unwell. He was hospitalized for dehydration.,1
"A log was being loaded onto a truck with a grapple. Because of the log's size, the grapple operator could not see the back of the truck and needed assistance placing the log in the truck. An employee climbed onto the back of the truck in order to assist. The log started rotating as it was being placed onto the truck. When the employee jumped out of the way, their hand was pinched between the log and a part on the back of the truck. The employee's left pinky finger was surgically amputated.",0
An employee was hitching a trailer to a truck when their finger was amputated.,0
"An employee was clipping bands to cables which involves partially hoisting the cables with a crane. During the hoist, the employee's left hand was pinched between the cables and a steel pin resulting in a partial amputation to the left thumb.",0
"While walking through the plant, an employee was struck by a forklift and sustained a head injury.",1
An employee was pulling dough through the dough cutter blade when their right pinky fingertip was amputated.,0
"An employee was removing a fracturing pump suction/discharge manifold. The discharge manifold shifted, and his right index finger was pinched between it and the suction manifold. The top part of the finger was amputated.",0
An employee fell from a ladder and sustained a compound leg fracture.,1
"An employee tripped while walking and fell to the floor, hitting his head and injuring his hip.",1
"An employee was trying to attach a hose to a fire hydrant to fill up a brush truck water tank. The force of the water through the hose knocked the employee off balance. He fell off the brush truck, landing about 6-7 feet below and suffering a broken left elbow.",1
An employee was retrieving boxes from the roof of an interior lab/office. The employee fell through the roof approximately 10 feet to the floor below. The employee suffered a fractured left femur and patella as well as head lacerations.,1
"An employee was pulling jammed cartons off a track. The employee's middle finger got caught in a pinch point of a machine where the cartons out-feed, resulting in a partial amputation of the right middle finger.",0
"An employee was in a trench that was approximately five feet deep, installing grout and bricks around a pipe that lead into a concrete drainage structure. The employee was between the concrete structure and a steel cave-in protection shield. An excavator was operating close to the trench and caused the steel shield to move, which pinned the employee's hip against the concrete structure. The employee sustained a fractured right hip.",1
"An employee was cleaning a jam in a laminating machine when the tips of her glove were caught between the feed and snap rollers, pulling in her right hand and crushing her little, index, and ring fingers.",1
"An employee removed the floor anchor bolts on an arbor press. While moving the press manually, it tipped over and struck the employee on the shin and ankle.",1
"An employee tripped while walking up a hill, landing on their face and suffering a head injury.",1
An employee was tying a bungee cord when it came loose and struck his left eye resulting in the loss of the eye at the hospital.,1
"An employee was milling beveled washers on a manual milling machine. As the employee was adjusting the washer, his left glove was caught by the shaft. His left pinky finger was lacerated and dislocated requiring surgery and hospitalization.",1
"While trying to reestablish a powerline connection, an employee came into contact with an energized line and suffered second- and third-degree burns to both arms and hands.",1
"An employee was repairing an air bag used in barge construction. A steel beam hit the employee's hardhat, forcing his mouth/jaw into another beam. He suffered an injury to the mouth/jaw.",1
"An employee was working rods up and down. His left hand was between the bottom clamp and the rod rotator when the rod rotator fell down, smashing and fracturing his left thumb and index finger.",1
"An employee's limb was pinned between a 12,000-pound transformer and a bucket truck. The employee was hospitalized.",1
An employee was operating a stand-up forklift when a second forklift ran into him. His left foot was caught between both forklifts and injured.,1
An employee's finger was caught between the door and door-frame of an entryway while entering the building. The distal end of the left middle finger was amputated.,0
"An employee was cutting meat with a bandsaw when his hands slipped and contacted the saw blade, resulting in a fingertip amputation.",0
An employee was loading a truck when he tripped over a pallet and fell from the raised gate to the ground. The employee was hospitalized with a broken wrist and pelvis.,1
"An employee was drilling a hole in a can containing aerosol spray glue. The can exploded, causing second-degree burns to the employee's arms, face, and neck.",1
An employee was cleaning out grease traps when hot grease got into her gloves. The employee was hospitalized with third degree burns and required surgery.,1
"An employee was loading corrugated sheets into a box former from a 24"" platform beside the equipment. As he was descending from the platform, he swung under the top rail to the floor and momentarily lost his balance. His right hand then entered the maintenance access opening on the backside of the box former, resulting in a partial digit amputation at the middle phalanx of the right index finger.",0
An employee was outdoors carrying equipment to locate pipelines when he started cramping. He was hospitalized for possible dehydration.,1
"Employees were using a forklift to lift a mower deck off a truck. The mower deck slid off the forks, pinning the employee's arm against the truck and breaking it. The employee was hospitalized, requiring surgery.",1
"An employee entered the subfloor to survey the area before submitting a plan for repair. There is a submersible pump and an electrical outlet for the pump to plug into under the subfloor. The employee touched an electrical source and sustained an electrical shock. The employee sustained a burn injury, internal damage, and was rendered unconscious. The employee was hospitalized.",1
"An employee was preparing an underground 7,200-volt utility cable. The cable shocked the employee, causing electrical burns on the torso and stomach area and an exit wound on the left foot.",1
"An employee was loading a trolley full of plants onto a truck. The trolley rolled off the truck and the employee was pulled over with it, falling to the ground and suffering a broken left tibia.",1
An employee was lifting a steel coil roll onto the 220-ton press when the strap broke and the coil dropped onto his left shin. The employee's leg was amputated.,1
An employee was performing fire watch duty when she walked backward and tripped over a fire extinguisher that was staged on the ground. She fractured two bones right above her ankle.,1
"An employee was unloading a flatbed truck. He fell off the truck onto the ground, injuring his ankle, and was hospitalized.",1
"An employee was chipping concrete with a rivet buster when an object struck his eye, tearing his cornea. He was hospitalized and had surgery.",1
"An employee was helping to put guardrails around a barge when he fell onto the steel floor, breaking his jaw bone and busting his lip.",1
"On September 9, 2020, an employee was attempting to start a vibrating tamper in order to continue compacting backfill material in a completed excavation. The employee pulled the starter cord multiple times. After the pull which started the engine, the pull cord of the vibrating tamper did not recoil correctly. The employee gathered the excess cord in his left hand in order to prevent an additional slip, trip, or fall hazard. When he engaged the throttle of the machine with his right hand, the pull cord retracted, wrapped around the employee’s left thumb, and caused a partial amputation of the thumb tip.",1
"An employee was setting up a canning line to package sliced beets. While checking to see if any food was stuck from sanitation, the employee's index finger contacted the rotating metal vanes of the rotary valve resulting in amputation.",0
An employee was attempting to grab a can of corn from a palletizer when the magnetic palletizer arm came down and partially amputated the top of the employee's left index finger.,0
"While climbing a ladder to go to the roof, an employee was stung by a bee. The employee had an allergic reaction and was hospitalized.",1
"An employee fell while walking, landing on the floor and suffering a broken left elbow.",1
An employee was using a magnet to flip a gear when the magnet disengaged from the part and fell on the employee's hand causing three broken fingers. The employee was hospitalized.,1
An employee had been dealing with a trespasser and had the police onsite. She also had a verbal altercation with a vendor. The employee then suffered cardiac distress.,1
An employee was working from a scaffold when he lost his balance and fell 10 feet through the guard rail to the ground. He fractured his skull.,1
An employee was attempting to move the cooling drum away from the blancher when their foot slipped causing their right thumb to get caught between the blancher drum and pasta chute while the drum was rotating counter clockwise. The employee sustained the amputation of the right thumb above the first knuckle and was hospitalized.,1
"An employee was attacked by a dog while delivering a package. The employee suffered multiple bites and was hospitalized, requiring surgery.",1
An employee was cutting wood with a bandsaw. The saw blade lacerated the employee's right middle and ring fingers and fractured a middle joint and ligament.,1
An employee was on a ladder performing house wrapping. The employee fell from the ladder and landed on the ground. The employee's right knee was injured and possibly broken.,1
An employee was cleaning the paw picker while holding the lid of the machine open. The lid fell onto the employee's hand resulting in a cut on the right index finger that became infected and required surgery.,1
An employee was troubleshooting an inoperative 277-volt light relay. The employee made contact with an energized component and received an electric shock and burns.,1
"While using a band saw to cut meat, an employee sustained a cut tendon, a fractured bone, and a possible amputation.",1
"An employee was climbing a ladder when it slipped out from under him. He fell 5-7 feet to the floor below, suffering a head laceration, a broken wrist, and a possible spleen injury.",1
"An employee fell to the floor while walking, suffering a broken left humerus and right tibia.",1
"The injured employee was stepping aside to allow another employee to pass by. The injured employee's shoelaces got caught in the metal lace hooks of their planted boot. The employee lost balance, fell to the concrete floor, and sustained a fractured hip.",1
An employee was feeding a cage sheet into a roller and became entangled in the cage sheet pulling his right arm into the roller. The employee suffered a broken right ring finger and wrist.,1
"A mechanic was replacing a flat tire on an over-the-road container chassis. While pushing the tire into position on the rear chassis axle, the new tire's rim shot off and struck the mechanic's left leg breaking the tibia.",1
"An employee climbed up a stepladder to paint when the stepladder moved/shifted and the employee fell 4 to 6 feet onto a steel surface. The employee was hospitalized with a broken shoulder, broken pelvis, and bruised spleen.",1
"On September 10, 2020, an employee fell from a ladder to the ground, resulting in hospitalization for back injuries.",1
"An employee slipped on a wet, concrete floor and fell to the ground fracturing their right kneecap.",1
"On September 10, 2020, an employee was leaving work when she slipped on the surface of a handicap ramp that was wet from rain. She hit the ground and fractured her knee, requiring hospitalization and surgery.",1
An employee was directing crane operations. Other employees were welding an H-beam together for the ring beam. The apparatus used to twist the 30-foot H-beam failed and the beam fell off the fixture onto the employee's right leg. The leg was crushed below the knee resulting in a surgical amputation.,0
An employee was operating a standup forklift and struck a steel beam. The employee's leg was crushed between the beam and the forklift resulting in amputation of the foot above the ankle.,1
An employee was digging and was hospitalized for heat stress.,1
"An employee was using a band to pull pallets of cans off a truck when the band snapped, causing the employee to fall backwards onto the floor. The employee suffered a fractured left arm and hand.",1
An employee was driving a stand-up forklift. The forklift crushed his left foot against a cement wall.,1
"An employee was trying to change a tooth on a saw blade. A pin on the tool the employee was using broke, and the employee's right middle finger came into contact with another tooth. The employee suffered an amputation affecting the side of the finger and the nail, with bone loss.",0
"An employee was attempting to connect a trailer to a ball hitch. He slid his fingers into the trailer receiver around the ball hitch when the receiver slid down, amputating his left middle and ring fingers.",1
An employee was attempting to disentangle the wire in a rewind machine when the wire caused a partial amputation to the employee's left thumb tip.,0
An employee was loading a paper roll onto a machine using a pneumatic powered dolly. The employee's hand was caught between a stationary roll of paper on the floor and the roll of paper they were moving. The employee suffered an avulsion to the hand and was hospitalized.,1
"An employee was walking down the hallway, slipped on the wet tile floor, and hit her head, right side and right knee.",1
An employee was using an electric pallet jack to offload a delivery truck at a loading dock. The pallet jack's front wheels retracted and the employee's left ring finger was caught in the pinch point. The employee suffered a fracture and amputation to the last joint of the finger.,0
An employee was lifting a piece of sheet metal from a shear. The metal fell and lacerated his left forearm.,1
"An employee was unloading tiles on a rooftop when he slipped and fell 9 feet off the roof to the ground floor, breaking his heel. The employee was hospitalized.",1
"An employee was painting an 18-inch detention system manifold supported on a metal sawhorse. When the employee rolled the part from vertical to horizontal, the pipe side of the manifold slipped off his hand. His left ring finger was pinched between the pipe and the sawhorse and the fingertip was amputated.",0
"An employee was flushing the line of a machine. Her earplug fell into the bowl and when she went to retrieve it, the blades amputated her right index fingertip.",0
An employee was slicing deli meat and amputated the tip of his right thumb.,1
An employee was adjusting a hydraulic press machine to push out a seal. The employee was moving the piece to be pressed when a second employee initiated the press to start the process to remove the seal. The ram came down and amputated the tip of the left little finger.,0
"While working in a crane truck, an employee lost balance and fell out of the bed of the truck, suffering injuries to the wrist and arms that required surgery.",1
An employee was lifting a box that weighed about 50 lbs. out of the back of his truck and dropped it on his foot. He experienced a loss of feeling in his foot and was hospitalized.,1
"On September 10, 2020, an employee was working from an 8-foot portable step ladder when the ladder became unstable and the employee fell to the ground. The employee suffered a dislocated clavicle and was hospitalized.",1
"An employee was using a battery operated cut-off saw to cut a hole in the steel deck when the saw ran out of battery. Another employee was going to retrieve a new battery, stepped onto the cut section, and fell through to the concrete deck approximately 21 feet below. The injured employee was hospitalized for a broken leg, pelvis, arm and ribs, a punctured lung and internal bleeding.",1
An employee was returning to her work area within the office using crutches. Her crutch slipped on a tiled portion of the floor. The employee caught herself from falling with the leg that had the pre-existing injury. She was hospitalized for muscle trauma to the upper right leg.,1
"An employee was moving a single manlift. As the employee tilted the lift backward, it fell on him and fractured his left ankle and injured his right knee.",1
"On September 10, 2020, at approximately 11:00 a.m., an employee was installing a fire alarm system from a ladder when he fell 20 feet to the pavement below. He was hospitalized with head and clavicle injuries.",1
"An employee was using an angle grinder when it kicked back and lacerated the employee's forearm, requiring hospitalization.",1
"An employee was dismounting from a crane, missed the hand rail, and fell to the hanger floor. The employee sustained a broken right arm.",1
An employee developed an inguinal hernia while lifting a set of hoses.,1
An employee was pushing a tile cart that was on an automated track into a dryer. The employee got caught between two carts and was struck by a cart. The employee sustained a broken pelvis.,1
An employee was climbing up a ladder to look at a roof and give an estimate when the employee fell off the ladder.,1
An employee tripped on the base of a wall and fell. She sustained a fractured right arm and a dislocated right wrist.,1
"An employee was walking into the facility after a break, tripped on curbing, fell, and fractured their right arm.",1
An employee was replacing manhole covers in the road and was struck by a passing car. The employee suffered a concussion and a broken back and was hospitalized.,1
"An employee was doing electrical work inside a house under construction. An excavator broke a gas pipe behind the house, possibly exposing the employee to natural gas. The employee suffered shortness of breath and dizziness and was hospitalized.",1
"An employee of Corbon's, Inc., was using a bandsaw to cut meat when his hand slipped and made contact with the saw blade, resulting in the amputation of his left index finger at the first knuckle.",0
"An employee was climbing an outside mounted ladder to access the roof on a commercial property. The ladder detached from the building and the employee fell to the ground, suffering leg and foot injuries. The employee was hospitalized, undergoing surgery.",1
"An employee was flagging drivers in a work zone on a public highway. He was struck by a spray truck that was moving in reverse while applying tar during a tar and chip paving operation. The employee suffered trauma to the left side, broken vertebrae, a punctured lung, and trauma to internal organs.",1
An employee was preparing a pre-trip on his forklift. Another forklift was moving pallets and backed into the employee causing a broken pelvis and internal bleeding.,1
"The injured employee was aligning a crane girder at the gas compressor building using a 10-ton hydraulic ram and three steel wedges. The employee was removing the last wedge using an 8-pound sledgehammer as another employee stood on the concrete off to the left side holding a tool tether attached to the wedge with python tape. As the injured employee was backing out the last wedge from the right side via a sledgehammer, the wedge unexpectedly came out from in between the column and the shim, striking the injured employee on the lower left leg and fracturing it.",1
An employee was struck by a forklift and suffered a head injury.,1
"An employee was injured on September 11, 2020, while pushing down on the support arm of an unloading device while a second employee was cranking it up. The injured employee sustained a partial fingertip amputation.",0
"On September 11, 2020, an employee tripped over an outlet in the floor while walking backwards. The employee suffered a fractured right hip and sprained shoulder, requiring hospitalization.",1
An employee was pulling wrap from the machine when a finger was caught by the crimper resulting in amputation of the distal phalanx and distal aspect of the middle phalanx.,0
"An employee was retrieving a tool that had fallen into a foam conveyor line. The employee fell into the conveyor line and was stuck between the heated blowout manifold and the conveyor, suffering burns and broken ribs.",1
"An employee tripped and fell while stepping up onto a stoop, injuring her right arm and left leg.",1
A trailer was being loaded with crane mats and precast concrete barriers. An employee was caught between the crane mats and an excavator and suffered bruising to the hips and buttocks.,1
"An employee was building a deck. When he approached the edge while installing screws, he fell about 10 feet to the ground. He suffered a left arm/elbow fracture and a right wrist fracture and a possible hip injury.",1
An employee was cleaning a food processor when its blade amputated the tip of a finger on his right hand.,0
"While collecting garbage, an employee stepped off the garbage truck and was crossing the street when a pickup truck struck the employee. The employee suffered head and hip injuries.",1
"An employee fell from the roof of a steel building to the concrete floor and was hospitalized with a bruised eye, busted lip, and facial scratches.",1
"An employee fell 40 feet from a tree that he had been pruning. He suffered a broken back, broken neck, and a separated shoulder.",1
"On September 11, 2020, an employee was hospitalized after their right ring finger was caught in a jammed garage door near the compactor as it was being forced closed with the forks of a forklift. The finger was lacerated.",1
A rolling cart struck an employee who was making a delivery. The employee suffered a leg injury.,1
"At 9:58 a.m. on September 11, 2020, an employee was installing HVAC duct in a ceiling at a new-construction single-story house. The employee fell from an attic area to the floor 9 feet below, suffering a fractured skull and losing consciousness. The employee was hospitalized.",1
"Two temporary employees were cleaning up trash in the work area. As they were transporting the trash to the trashcan using a utility vehicle (UTV), the UTV rolled over. The driver sustained a concussion and head laceration and was hospitalized. The passenger was not injured.",1
An employee suffered an asthma attack in an area that was being mopped.,1
"A security guard was punched in the face, suffering a broken jaw.",1
A teacher lost their footing while walking in a classroom and fell. The teacher suffered a broken ankle that required surgery.,1
An employee was performing preventive maintenance on a conveyor using a rag. The rag got caught on a live chain drive and pulled the employee's right index finger into the chain drive resulting in a partial amputation.,0
An employee was trying to muzzle a dog. The dog bit the employee's right hand and the employee was hospitalized.,1
"An employee was building pallets using a nail gun. He tripped on a board on the floor, and the gun shot a nail through his hand.",1
"An employee was preparing a steel sheet for loading by placing it onto the floor. After being tilted to the side, the sheet fell onto the employee's legs and broke the employee's left ankle. The employee was hospitalized.",1
"On September 12, 2020, an employee was attempting to remove jammed material from a click press when the machine amputated their left index, middle and ring fingers at the phalanx.",0
An employee was closing a gate. His middle and ring fingertips were caught between the gate and its guide wheel and amputated.,1
An employee was adjusting a cutter when the machine cycled and his right index finger was pulled into the guide. The fingertip and nail were amputated.,0
"An employee was feeding metal into a shear. The shear activated and closed on the employee's left thumb, amputating it.",0
An employee was laying down new insulation board on a roof and fell approximately 14 feet off the roof to the ground below. He suffered a broken tibia and injured his back and ankle.,1
"A metal grate slipped off an item that was being used to hold it up. It fell onto an employee's left hand, amputating the tip of the middle finger.",1
"Two employees were loading a roll of paper into a printing press. The decking moved forward as part of the process, and an employee slipped and fell into the resulting opening. The employee suffered a broken tibia.",1
"An employee was performing preventive maintenance (oiling and lubrication) on a packaging conveyor when the employee saw something on the chain and attempted to wipe it off. The chain caught the tip of the employee's glove and pulled their hand into the drive chain and sprocket, resulting in an amputation to the right index finger.",1
"An employee was preparing to run wire, fell on the roof, and broke a hip.",1
"An employee was running a liquefied petroleum gas (LPG) standard with laboratory equipment when the equipment was knocked off the counter, causing the quick connect to fail. LPG then released and was ignited by the equipment's heating element. The employee received first and second degree burns on the right and left hands.",1
An employee was pushing a housekeeping cart down a ramp to the trash can. The ramp was approximately 6 inches from the sidewalk to the ground level. The cart went off the ramp and the employee tripped over the cart and fell. The employee was hospitalized with a fractured left hip.,1
"An employee was standing next to a spool, guiding a cable as it was spooled on. The employee was caught between the cable and the box, suffering a broken right big toe and amputations of three other toes.",0
An employee fell from a ladder and suffered a head injury. The employee was hospitalized.,1
An employee was trying to relieve pressure at the valve of a workover rig. The valve broke under the pressure and the employee's face was lacerated.,1
"An employee was using a lift to access a work platform to conduct work on an exhaust fan. As the employee stepped from the lift basket onto the work platform, the platform collapsed and the employee fell 16 feet to the concrete floor below. The employee sustained a fractured left hip, two left rib fractures, a fractured left arm, and a fractured left orbital bone.",1
An employee was bitten by a rattlesnake while pulling weeds.,1
An employee was using a saw to cut the end of a wooden survey stake and suffered a partial amputation of the right thumb.,0
An employee was operating a reach truck and pinned his left foot between the reach truck and the supporting beam resulting in a compound fracture.,1
An employee was unloading a truck using a cart. The cart tipped over onto the employee's leg and fractured the left tibia.,1
A employee was hospitalized for heat illness.,1
"On September 14, 2020, an employee was guiding powder flow into the capsules on a pellet press. The employee's right middle finger was pinched in the press, causing an amputation to the fingertip.",0
An employee was delivering mail when a low hanging branch struck his left eye. The eye injury required surgery.,1
An employee was on a residential service call. While descending a ladder he fell and broke his leg. He also sustained a fractured vertebra.,1
"An employee was abrasive blasting structural steel when their air supply hood caught on something causing the employee to lose their balance. As the employee reached to regain their balance, the abrasive nozzle crossed their arm causing a laceration/abrasion injury to their wrist.",1
An employee was working on a roof and started to feel dizzy. He was hospitalized for heat exhaustion.,1
An employee was helping to stabilize a hydraulic brake that was being lowered to the ground via a powered industrial truck (PIT). The employee was holding onto the pallet when it was lowered onto the ground and crushed his right index finger. The fingertip was amputated.,0
An employee was on a line crew replacing burned power line poles. The employee touched the backhoe boom and suffered an electric shock.,1
"At about 6:30 a.m. on September 14, 2020, an employee was preparing to load reels of copper cable onto a flatbed truck. The employee's left ring finger was pinched between two of the reels, causing a displaced fracture and an amputation to the fingertip.",0
An employee was unloading the truck onto the docking station. The employee was on a ladder attached to the truck when he slipped and fell backwards. His foot got caught in the ladder and the employee's ankle was broken.,1
"An employee jumped onto some cardboard on a pallet and fell, breaking his right leg. He was hospitalized.",1
An employee was clearing a jam on the blown fiber machine and smashed his left ring finger and amputated his index finger on the roller.,0
"On 9/14/2020, at approximately 7:10 a.m., a maintenance technician was troubleshooting a date coder conveyor on a packaging line when his arm became entangled in a roller on the underside of the conveyor belt resulting in hospitalization for a fractured ulna and radius.",1
"An employee was struck by a vehicle while gathering census information. The employee suffered a concussion, a broken shoulder, a dislocated and broken left ankle, facial abrasions, and a dislocated right middle finger.",1
"An employee was replacing filters on top of a vacuum truck. The truck's 400-pound hatch closed on the employee, causing a laceration to the right hand, bruising above the left knee, and a dislocation at the right ankle.",1
An employee was stung by an insect while putting on gear to start welding and was hospitalized.,1
An employee was welding and crushed their left index finger between a weld point and the metal plate in the weld fixture resulting in amputation.,0
"On September 14, 2020, an employee fell approximately 13-14 feet from the edge of a roof onto the ground. The employee sustained a fractured sternum and vertebrae.",1
"An employee was operating a projection welder when the electrodes closing action was activated while his finger was between the electrodes. His left index finger was caught in the welder, resulting in an amputation.",0
An employee slipped and fell off the back of a flat bed truck. The employee sustained fractured ribs.,1
"An employee was stapling insulation onto the side of a building under construction. The employee began convulsing and fell, lacerating their head and requiring hospitalization.",1
An employee fell down stairs and suffered a head injury.,1
An employee was loading product onto a box truck using a pallet jack. His right foot got caught between the pallet jack and the interior wall of the box truck and was fractured.,1
"The injured employee was part of a crew unloading a semi-trailer of a 6-foot stack of insulated pipe. After cutting one of the four steel bands, the employee stepped onto a nearby 4x4x4 crate in front of the trailer. The employee lost balance, fell and landed in between the tractor and the trailer. The employee injured their collar bone and scapula and sustained a cut on the head and a puncture wound on the back.",1
"An employee was cleaning up shot from under a steel plate that was being held up by a forklift. The plate fell onto the employee, breaking the employee's leg.",1
An employee was moving a steel-plated skate/equipment pallet across the floor. The employee's right middle finger was caught between the skate and the floor. The fingertip was amputated with no bone loss.,0
"On Monday, September 14, 2020, at approximately 10:40 AM, employees were setting precast concrete wall panels (45' x 12'). A lift was used to pickup braces. The frame of the lift contacted a wall brace causing a concrete panel to fall. As the panel fell, it struck a manlift that was being used to install braces. As the manlift fell, it struck the lift causing an employee in the manlift to be ejected. He was wearing a personal fall arrest harness at the time. The employee sustained a fractured right femur and fractured ribs and was hospitalized.",1
"On September 14, an employee was on a ladder performing telecommunications work when the ladder slipped and the employee fell to the ground. The employee was hospitalized with broken bones and required surgery.",1
An employee caught his foot on the corner of a desk and fell breaking his right hip.,1
An employee's right ring finger was amputated between the first and second knuckle by the hydraulic ram of an asphalt paving machine.,0
An employee was operating the rebar bending machine and amputated his left index fingertip.,0
An employee was picking up product using a pallet jack when his knee was caught between the pallet jack and a rack and fractured.,1
"An employee was on a ladder about 10 feet off the ground, trying to unclog a water mister. The mister began to spray water onto him; as he tried to close it off and avoid the water, his right hand was struck by a large box fan blade. He suffered an amputation to the little finger.",0
An employee was replacing a 25hp electric agricultural water pump in an irrigation pumphouse and received an electric shock of 480 volts. The employee sustained burns to the hands.,1
An employee was sharpening a belt on a lathe. The employee sustained a broken wrist when their hand was caught in the machine.,1
An employee was cutting wooden 2x4s using an angle grinder blade. The wood kicked back and the employee sustained a 5-inch laceration on the left forearm that required surgery.,1
"Two employees were removing 50-pound hammers from a steel box on a roader in a sugar mill. While removing the hammers, the steel box fell. One employee was pinned between the steel box and the roader. The other employee was struck by hammers. One employee was hospitalized for a fractured sternum.",1
An employee was operating a labeling machine and suffered an amputation injury to a finger and a thumb laceration.,0
An employee was taking down warehouse racking when a piece of the racking fell down and amputated the tip of the employee's index finger.,0
"An employee fell from a second story residential roof to the ground, fracturing several bones.",1
A solar installer fell off a ladder onto the ground below. The employee was hospitalized for fractures to both legs.,1
"A truck driver was working from a stepladder, loading pre-cast concrete sound barriers onto the flatbed of a truck. He stepped off the ladder, slipped, and fell about 5 feet to the ground. He suffered a hip injury and was hospitalized.",1
"A census taker was at a house when a dog chased her. She fell, hitting her head on the ground. She was hospitalized.",1
A warehouse worker was attempting to move a food assembly machine off a broken pallet. The machine began to fall over and it fell onto his right hand as he tried to catch it. The employee sustained three fractures and two lacerations to the right hand.,1
"An employee tripped and fell on a buckled section of floor, suffering a broken right hip and femur.",1
An employee was stung by a bee or wasp and was hospitalized for heart arrhythmia.,1
An employee was pushing a wire cart in the trash enclosure and brushed up against a trash bag. An unknown protruding object lacerated the employee's lower right leg.,1
"An employee was scrubbing the framework of a stand that held a tabletop scale. As the employee moved the scale, it fell to the floor and onto his left middle finger and amputated 1/4 inch of the finger.",0
"An employee was using a lift gate to load tubs into the truck. When the lift gated was activated, the employee's right middle finger was caught and partially amputated.",1
"At 8:00 a.m. on September 15, 2020, an employee was using a bandsaw when it fell onto his right little finger and lacerated. He was hospitalized, undergoing surgery.",1
An employee stepped from the wire bridge to the winch wall and lost his footing on the wall. His left leg and knee struck the wall as he fell resulting in a fractured lower leg and damage to his knee cap.,1
An employee was organizing clothes racks on the sales floor prior to store opening. The employee fell and fractured a femur. The employee was hospitalized for surgery.,1
"An employee was transferring raw material into a product hopper via a vacuum transfer system. During the bag change process, a flash fire occurred and burned the employee's forearms and face.",1
A circular saw amputated an employee's left index fingertip at the first knuckle.,0
"On September 15, 2020, an employee was using a pry bar to unjam pallets on a roller conveyor and suffered a partial amputation to the left pinky finger.",0
A temporary employee was installing a structural steel brace for a cooling tower being erected. An unsupported brace slid off a column and the employee's right index and middle finger were pinched between the two. The employee suffered amputations to both fingers below the knuckles.,1
"An employee was moving two steel pipes from one run to another run using a rail car pipe truck. While transferring pipe, the east (right side) pipe struck a steel I-beam causing the pipe to jump the pipe truck retainer lip and the spigot end of the pipe struck the employee's foot. The employee suffered a partial amputation of the foot.",1
An employee was climbing up a ladder and fell 6 to 8 feet. Both arms were fractured.,1
An employee was bending parts on a press brake when his hand got caught in the machine resulting in amputation of his right index finger.,1
"An employee was straightening out a section of a core wall in a core cell. The employee completed his work and was stepping down off the wall when he lost his footing, slipped, and fell 3 to 4 feet to the floor, landing on his right foot. His right ankle was broken.",1
"An employee was doing roofing work on a dome. The employee slid about 60 feet down the roof and struck a wall, suffering a dislocated left knee and broken left tibia.",1
An employee tripped and fell 4 feet out of a box truck resulting in a torn patella tendon in the right knee.,1
"An employee fell off a double-stacked pallet, landing on the ground about 8.5 feet below. He suffered rib or chest injuries and was hospitalized.",1
An employee was using a push aid to unjam shredder output when he felt a pain in his lower back and leg. He was hospitalized for a lower back strain.,1
"An employee was using a drill on the cage of a mobile welding machine. As he tightened a bit on a truck tool, the tool was activated and lacerated his right index finger and the space between the finger and the thumb. He was hospitalized.",1
"An employee was troubleshooting and adjusting the position of a lift table assembly  inside a bagging machine when the entire lift table assembly rotated, pinching the employee's left index finger between the pivot arm and the servo coupling. The employee suffered a partial amputation to the left index fingertip.",1
"An employee was riding a bicycle when the chain dislodged from the sprocket. The employee fell to the concrete, suffering a broken right forearm.",1
An employee missed a step while descending a staircase and fell. The employee sustained a fractured right arm.,1
"An employee was walking through a door carrying product when the product became caught on the door. The employee tried to free the product by pushing on the door. One of the employee's right-hand fingers was then caught in a pinch point as the door began to close, removing a sliver of flesh and resulting in a partial amputation.",1
An employee was moving equipment using a lift when he felt a sharp pain in his stomach due to a hernia.,1
"An employee inadvertently placed their right hand on a belt sheave, which then amputated the middle finger.",1
"On September 16, 2020, an employee was clearing the bottom tape that had become wrapped around the crusher belt on the bag line. The machine was activated and the employee's left middle finger was caught in the crusher belt resulting in surgical amputation of the fingertip.",0
"An employee was helping install steel bar joists on steel beams as the joists were lifted into place. A joist hung up, then swung as the employee pried it loose. His right hand was caught between the joist and other steel members and the tip of his little finger was amputated.",0
An employee was walking up the ramp for the shuttle bus when she slipped and fell on her upper extremities. The employee required hospitalization and surgery.,1
An employee was operating a cable pully machine (a winch) when the nylon rope that was attached to a cable he was pulling through an underground electrical installation broke and struck him in the head and face. The employee sustained a head laceration and bruises to their face.,1
An employee was getting ready to remove product from the loading dock when he slipped and fell on a wet ramp. The ramp activated and his right middle finger was caught in a gap in the ramp and amputated.,1
An employee was walking down the dock and was struck by a forklift. The employee received multiple fractures to the right leg.,1
"On September 16, 2020, an employee tripped over a rail in a warehouse aisle. She fell, striking her knee on the concrete floor. She was hospitalized and underwent surgery for the knee injury.",1
"An employee was on a ladder 6 to 7 feet high performing maintenance work on a light fixture. The employee received and electrical shock and fell from the ladder to the floor. The employee was hospitalized with two fractured vertebrae, a fractured left humerus, and an electrical burn on his hand.",1
"At about 8:30 a.m. on September 16, 2020, an employee fell through a roof opening and suffered a broken wrist and a neck injury.",1
"An employee was approximately 4 feet above the ground on a 6-foot A-frame ladder using a drill to remove screws from an air handling unit vent when the drill kicked back. The employee lost balance and fell backward onto a concrete ledge, suffering a fractured skull, forehead cut, fractured heel, and hematoma.",1
An employee was adjusting a stitcher machine when their gloves were caught in a gear and chain. The employee's fingertip was amputated.,1
"An employee was walking on an elevated walkway approximately 20 feet high to reach a camera that needed repair. As he walked past another employee who was also walking on the walkway, he fell through an opening in the hand rail. The employee sustained a broken right arm, a fractured L-4 vertebra and a laceration to the face that require stitches. The employee required surgery to repair a fracture.",1
"An employee was walking with an armful of materials. He tripped and fell to the floor, suffering an injury to the right leg. He was hospitalized.",1
"An employee tripped and fell to the floor, suffering a serious injury.",1
An employee opened a trailer. A propane leak within the trailer caused an explosion and the employee suffered severe hand burns.,1
"An employee was securing a load on a flatbed trailer and slipped off the trailer to the ground. The employee sustained a fractured wrist, dislocated shoulder and a head laceration.",1
"An employee was working from a perry style scaffold that was 3 feet off the ground when he stepped backward off the scaffold and fell to the ground. He broke his right tibia, requiring hospitalization and surgery.",1
An employee was taping a new core to the winder stand of the calendar machine when their left arm was caught in the rotating winder and fractured.,1
An employee was struck in the face by a falling concrete block while lining up the scaffold to repair a door lintel. The employee sustained a fractured nose.,1
"During tree felling, a tree fell to the ground, bounced, and struck an employee's leg. The employee was hospitalized for a leg fracture.",1
"An employee was standing on a truss, sheathing the side of another truss. The employee then attempted to set up a truss to the layout tie but lost his balance and fell 12 feet onto a concrete patio. The employee was hospitalized with breathing complications and chest pain. The employee's lifeline was untied at the time.",1
An employee was winding synthetic rope onto the hoist of a chipper machine when his thumb was pinched by the rope. The employee's left thumb was amputated at the first digit.,1
An employee was monitoring the operation of a machine and suffered amputation of the right middle fingertip in an auger.,0
"A construction forklift leaving the construction area with the forks elevated approximately six feet above the ground, turned toward traffic, and struck a postal vehicle and the driver with the forks. The postal carrier sustained a broken arm and elbow.",1
"An employee was using a forklift to fill orders in a warehouse and attempting to retrieve a pallet between two stacks of other pallets. As he was driving between the two stacks, his foot was caught on a pallet on the left side of the forklift, pinning his leg between the pallet and the forklift. His left leg broke, requiring hospitalization.",1
"An employee fell through the sheetrock ceiling in a home's attic, landing on the concrete floor below and suffering head injuries.",1
An employee was operating a forklift at a well site and was hospitalized for heat stress.,1
"An employee was using a break machine to form metal . His right index finger was caught between the machine's clamp and the metal material, causing an amputation to the tip of the finger.",0
An employee was cutting scrap with a vertical bandsaw when the back of the employee's hand contacted the blade and was lacerated. The employee was hospitalized.,1
An employee fell from a forklift basket and fractured both forearms. The employee also sustained a left knee fracture and facial fractures. Fall protection was not worn at the time.,1
An employee was cutting steel with a cutting wheel on a rotary grinder when the cutting blade broke apart and a piece of the blade struck his inner right arm. He suffered an arm laceration that required surgery.,1
An employee was using a walk-behind floor foamer/scrubber when the employee slipped and fell to the floor. The employee was hospitalized with a broken left femur.,1
"An employee was hot air welding PVC roof seams and transitioning to a new location on a roof when his extension cord bumped a gallon container of acetone. The container began to tip and he tried to catch it with his right hand. Some contents spilled and were subsequently ignited by a flameless hot air welder that was approximately 2 feet away. His pants and shirt caught fire, and he received second degree burns to his right hand, arm, and bicep. He was hospitalized.",1
"An employee was tying down a load on a flatbed trailer with binding straps. As he threw a strap across the load, he released the strap and lost balance. He fell to the ground, striking and fracturing his left hip.",1
"An employee was operating a bar spinner machine when he noticed that it was not moving back and forth smoothly. The employee went under the machine while troubleshooting to look at how it was traveling along the rails. As the employee went to stand up, his hand came in contact with the machine while the spindle was still in motion, resulting in an amputation of the right index finger above the first knuckle.",0
An employee was working on an 8-foot ladder and fell backwards from the ladder onto the concrete and striking his head on the threshold of a doorway. The employee sustained a head contusion and laceration.,1
"Two employees (mechanic and operator) were changing the wheels on a landfill compactor. The operator was operating a wheel loader and lifted a large metal compactor wheel off the ground to be installed on the compactor. The mechanic was signaling directions to the operator to align and set the wheel in place. While signaling and moving the wheel onto the machine, the wheel shifted on the loader forks and pinned the mechanic between the forks and the wheel. The mechanic suffered a fractured rib, hip and vertebrae.",1
An employee was placing a lantern on the dock stairs when she was bitten several times on the right wrist by a baby copperhead snake. She was hospitalized.,1
An employee was preparing to change an oil plug when a fire occurred and the employee was burned.,1
"An employee was operating a rubber jamming machine when a piece of rubber became stuck in the cutting side of the machine. As he was attempting to unjam it, the machine's knife cut his fingers, resulting in the amputation of his right ring and pinky fingers.",0
An employee was cleaning a conveyor line used to package finished cheesecakes. The conveyor belt was removed for cleaning and the employee was cleaning around the head/drive pulley. The conveyor started and the employee's hands were pinned under the conveyor's sprockets and shaft located on the head/drive pulley. The employee sustained a fractured left forearm and lacerations on the left hand.,1
An employee suffered the possible amputation of three fingers while using a chop saw.,0
"An employee was walking alongside a skid steer that was carrying a hoisted cage used to pour foundations. He was holding onto the cage to keep it steady when he tripped over a nearby portable generator. The skid steer then ran over his foot, fracturing his right ankle.",1
An employee was walking on a roof and fell 14 feet through the roof to the cement floor below. The employee sustained a fractured tail bone.,1
"A truck driver was sitting in a stopped pickup truck with the driver-side door open in the left shoulder median of I-95 southbound, checking truck access areas for an I-95 northbound paving work area. The employee's pickup truck was then struck by a tractor trailer, and both vehicles spun and ended up in the trees on the right side of I-95 southbound. The employee was thrown from his vehicle and impacted the ground, suffering a head injury, fractured ribs, and a fractured femur. He was hospitalized.",1
"An employee was walking up to a forklift to speak to the forklift operator when the forklift operator reversed the forklift and ran over his foot, fracturing it.",1
"Two employees were hand-loading fiberglass panels onto a hand cart when four panels slipped off the cart to the ground. They tried to pick up all four panels at once, but realized that the stack was too heavy and started to put them back down. At that time, one of the employees lost his grip and the panels landed on his left middle finger, resulting in the medical amputation of his fingertip.",0
"An employee was changing a blade on a utility knife/scrapper. As he was tightening the screw that holds the blade in place, the screwdriver slipped, causing his wrist to slide across the blade. He suffered a laceration and puncture wound on his wrist.",1
"An employee fell from a trailer while it was in motion. The employee sustained fractured ribs, a possible dislocated shoulder, an ankle injury, and required stitches on the forehead.",1
An employee was on a five-foot baker's scaffold installing an acoustic ceiling. The employee fell to the ground below and suffered a nose bleed and confusion.,1
An employee slipped on a wet floor and fractured her hip. The employee was hospitalized.,1
An employee slipped and fell to the ground while exiting a water truck via the ladder. The employee was hospitalized for a foot/ankle injury.,1
"An employee was setting a press die. As he fed material into the press, the die amputated a fingertip.",0
"A piece of 6-inch by 6-inch metal T-beam dislodged from an A-frame cart while being lifted. It fell 8-10 inches and struck an employee's right big toe, fracturing it.",1
An employee was climbing an extension ladder to enter the attic. The bottom of the ladder slid out and the employee fell 6-8 feet hitting his left ribs on a metal sink. The employee sustained eight broken ribs.,1
An employee was flagging traffic when an SUV struck the employee. The employee suffered nerve damage in the lower back and down the leg as well as a hyperextended medial collateral ligament.,1
"An employee was walking along a temporary path to a bathroom when the employee slid/fell approximately 8 feet down an embankment to the ground, suffering fractured ribs.",1
"An employee was loosening Allen bolts on a generator system when a seal failed on a line connected to the generator, exposing the employee to leaking chlorine dioxide.",1
"An employee was operating a steel bender when their right ring finger was caught in a pinch point on the bender, de-gloving the finger from the knuckle to the tip.",1
"An employee was operating a mobile boom lift on a barge to lift a piling out of the water when the boom broke and struck the employee on the leg, leading to a fractured leg.",1
"An employee was collecting road cones from the back of truck that had a hydraulic lift gate when his fingers got in the pinch point between the gate and truck bed, leading to an amputation of his middle and ring fingertips.",1
"An employee was loading packages into the right side of a mail truck when a garbage truck struck the left rear-end of the mail truck. The impact pushed the mail truck onto the sidewalk and into a building, and the employee was thrown from the truck to the ground. The employee suffered collarbone and head fractures.",1
"An employee was helping to install an M256 tube with a bearing assembly into a recoil mount in preparation for testing. While guiding the tube (which was being held by a crane) into the recoil mount, his gloved hand became caught, resulting in the amputation of two left-hand fingertips.",0
A pressure washer injured an employee's hand. The employee was hospitalized.,1
"While returning to their patrol vehicle after dark, an officer slipped and fell down an embankment in the woods fracturing three ribs.",1
"On September 18, 2020, an employee slipped and fell to the floor, suffering a hip fracture that required hospitalization.",1
An employee was removing shrink wrap from a pallet and tripped over an extended outrigger on a forklift. The employee fell and fractured their right femur.,1
"An employee was walking to a hand wash area at the end of his shift. At the same time, a contract team member was entering the facility to clean it with a water hose. Part of the hose was dragging on the floor. The employee tripped on the water hose and fell, fracturing his left hip.",1
An employee was working on a lacquer cylinder on a printing press when the cylinder moved and caught his left hand. The employee was hospitalized with a bruised left hand.,1
"An employee returned from his lunch break and was performing labor which included removing dirt clods from a small trench. The employee was sweating and pale, and stated that his chest was hurting. The employee was hospitalized for a heart attack.",1
An employee was checking sensors on sump pumps and fell approximately 5 feet into the opening of the sump vault. The employee sustained a fractured hip.,1
"On September 18, 2020, an employee was servicing a printing press. While manually working on the drive shaft, the machine re-energized and the employee's right hand was caught between the tensioning device and drive belt resulting in an amputation.",1
Two maintenance employees were replacing an oil pressure pump coupling on a moving table bridge mill. The cutter dropped from the spindle and amputated the injured employee's right thumb below the fingernail.,0
An employee was inspecting equipment to find the source of a hydraulic fluid leak when his right arm was caught between the wheel and the wheel frame resulting in fractures to the right wrist.,1
A temporary employee was operating a lathe and caught his right middle finger in the machine. Half of the finger was amputated at the hospital.,0
"An employee was descending a fixed ladder attached to a building, slipped, and fell to the ground. The employee sustained fractures to a wrist and hip that required surgery.",1
The injured employee was working under the truck when a second employee tried to start it causing the truck to jump forward and run over the injured employee's left foot causing a closed fracture of a metatarsal bone.,1
A separator operator in training was loading chick buggies onto the chain conveyor of a separator machine. The employee noticed a crooked tray on a buggy entering the separator and placed his right foot on the chain conveyor to reach into the machine and straighten the tray. The next buggy moved forward and caught the employee's leg against the conveyor fracturing his tibia and fibula near the ankle.,1
"A lineman fell approximately 28 feet from an elevated bucket truck to the ground. The employee lost consciousness and suffered fractures to a heel, both forearms and the L-1 vertebra.",1
An employee was bending bars when their fingers were caught in rollers and amputated.,1
An employee was cleaning a resaw machine and amputated their index fingertip. The index finger was also fractured.,0
"On September 18, 2020, at 6:21 AM an employee working on the rear passenger side of the garbage truck was struck by a vehicle while picking up curbside garbage. The employee suffered a broken orbital bone, broken cervical discs and facial lacerations.",1
An employee was servicing shredder equipment that was jammed and began to have leg cramps. The employee was hospitalized for heat exhaustion.,1
An employee was wrapping a component for shipping when the component tipped over onto the employee's leg.,1
"Two employees were operating a 300-ton press. The injured employee was stacking manufactured parts from the mechanical press. As the injured employee was removing a cut part from the press, the press activated and his arm was crushed in the press. The employee's arm was amputated at mid forearm.",1
"An employee was loading a refrigerator, slipped, and fell hitting her head on the floor. The employee sustained a head injury and bleeding on the brain.",1
A truck backed up and pinned an employee between the dock and the trailer. The employee suffered a fractured pelvis.,1
"An employee driving a forklift made a left turn to go into a rack aisle, then stopped to let another employee lower their forklift. The employee then lost control of the forklift while passing the other lift. The employee reached out to brace himself prior to impact with a cross beam and his left pinky finger was pinched between the forklift and the cross beam. The fingertip was amputated.",1
An employee was working on the third tier of a four-tier scaffold. The employee used a cross brace to gain more height. The cross brace broke and the employee fell approximately 16 feet to the ground below resulting in hospitalization for back and upper right shoulder injuries.,1
"On 9/18/2020, at 9 PM, a temporary employee was crossing a dock to guide a trailer into a door when a crossing/passing forklift ran over his foot. He was hospitalized with a fractured left ankle.",1
An employee was working at a swaging station. The swaging machine amputated the employee's right index finger.,1
An employee was vacuuming sand from a residential crawl space when the vacuum caught the employee's left arm causing a hematoma.,1
An employee was operating a pneumatic-powered shear and suffered a partial amputation of the left ring and pinky fingers.,0
An employee was troubleshooting a knockout punch and suffered a partial distal phalanx amputation of the right ring finger.,0
"An employee was emptying a trash can, lost his balance, and fell to the floor. The employee sustained a fractured left hip.",1
An employee was operating a bandsaw and amputated their right thumb tip.,0
"On September 18, 2020, at 10:43 AM, an employee was felling a tree. When the tree fell and contacted the ground, the butt end of the tree jumped off the stump and struck the employee. The butt end then knocked the employee to the ground and landed on the employee's left arm and shoulder area. The employee suffered a fractured ulna, clavicle and ribs. The fractured ulna required surgery.",1
"One employee stabbed another with a pocket knife, causing abdominal wounds that required hospitalization and surgery.",1
"While moving drums in the back of a delivery truck, an employee fell from the truck to the ground, suffering a concussion and head laceration. The employee was hospitalized.",1
An employee was carrying a box when he started having back pain. The employee was hospitalized for a soft tissue injury that was causing internal bleeding.,1
"An employee slipped and fell to the floor while walking, fracturing a knee.",1
An employee bent over to pick up an agave plant for a customer and the tip of the plant struck her right eye.,1
An employee was attempting to pull a switch in the back of a forklift to release the brake. His hand contacted the radiator fan blade and half of his right pinky finger was amputated. The employee was hospitalized.,1
An employee was removing hot sulfur slugs and sulfur splashed onto his face. The employee sustained a second degree thermal burn on his cheek.,1
An employee was lifting a conveyance gate and caught their finger in a conveyance roller resulting in a severe abrasion that required surgery.,1
An employee fell through a hole in the decking on the ninth floor to the eighth floor below and suffered a compression fracture of two vertebrae and a fractured wrist.,1
An employee was removing a stuck part from a mechanical power press and amputated two fingers on the right hand.,1
"At 1:14 p.m. on September 18, 2020, an employee slipped in the asphalt cement at the edge of a roof as he stepped onto the roof from a ladder. He fell to the ground 8 feet below and suffered a broken heel.",1
An employee was using a magnetic drill and caught their left thumb in the rotating drill bit resulting in a partial amputation.,1
An employee slipped on a wet floor and fell breaking their right hip.,1
An employee was operating a capstan hoist when two fingers on his right hand were caught between the rope and the drum of the hoist resulting in amputation of the distal phalanges.,0
"On September 19, 2020, an employee fell while descending a ladder from a roof and landed on a concrete floor. The employee suffered a fractured knee.",1
An employee was cutting meat using a band saw and amputated the right index and middle fingertips.,0
An employee parked her truck but it started rolling. She tried to get back in the truck and then tried to get out again before the truck rolled into a river. She got caught between a tree and the truck door. The employee sustained multiple rib fractures and an abrasion to her shin that required a skin graft.,1
An employee was operating a powered pallet jack when his left foot struck a pallet of produce. He suffered a broken left tibia and fibula.,1
"An employee was conducting morning inspections in a caustic unit. A section of CPVC pipe 15 feet above broke off as a valve was being released, fell, and hit the employee in the head. He suffered a skull fracture and lost consciousness. He was hospitalized.",1
An employee was cleaning the boiler house when he noticed a spider bite on his left elbow.,1
An employee's fingers were amputated when their hand was caught in the meat tenderizer machine.,1
An employee was stepping from the top of a cargo tank trailer onto the top rung of a ladder when they fell approximately 12 feet to the ground. The employee suffered multiple fractures to the right arm that required surgery.,1
"A door slammed on an employee's left little finger, cutting the fingertip severely.",1
An employee was performing maintenance on a baggage belt and was using a towel to clean the belt. The belt pulled the towel and the employee's left hand into the belt. His left middle finger was caught in the chain and sprocket and amputated.,0
"An employee was repairing a valve on an air line. As he tested the valve, it closed on his left index fingertip, causing an amputation.",0
An employee leaned on the glass door of the fragrance cabinet and the glass shattered. The employee was hospitalized for an eye injury .,1
"Employees were performing maintenance on a crimp press. The employees were using an impact (pneumatic) wrench to remove bolts from a vertically positioned cylinder in the crimp press. The injured employee was supporting the weight of the impact wrench to keep it steady. His fingers were underneath the vertically positioned impact wrench, away from the nut being removed. When the final nut was loosened, the cylinder slid down and crushed his pinky finger between the back/bottom of the impact wrench and the metal below it.",1
An employee was monitoring machine operation and noticed an ice cream bar stick was not released. The employee's right ring finger was then caught in the point of operation and amputated by the drop bar on the machine.,0
An employee was lifting a bundle of metal onto a stack with a crane. The bundle clipped the top bundle on the stack which then fell off and onto the employee's left leg fracturing it.,1
"At 3:00 a.m. on September 21, 2020, an employee was unloading a trailer. The employee's right foot was caught and lacerated between a pallet jack and the wall of the trailer. The employee was hospitalized, requiring surgery.",1
"An employee was power washing a deck and fell to the ground below, breaking a leg.",1
While cleaning a conveyor belt an employee was removing a piece of product and his finger was caught between the moving conveyor belt and scraper. The pad of the fingertip was amputated.,0
"An employee was exiting her carrier vehicle from the driver's side (right side) and stepped on a gravel area. She slipped on a rock and fell, landing on her wrist and fracturing it.",1
An employee was cleaning in the pack off area of the facility using a high pressure hot water hose. The employee was walking with the hose when the hose got caught on the conveyor frame in the area and the employee lost their grip on the hose. The hose fell to the ground and the employee was sprayed with hot water. Hot water got inside their boot and the employee sustained first and second degree burns to their left foot.,1
"On September 21, 2020, an employee was performing boiler maintenance and was using a 6"" hand held angle grinder with a wafer cutting wheel to cut block welds in order to remove the cyclone tubes for replacement. While cutting, the cutting wheel became pinched and the grinder kicked back. The employee lost control of the grinder and sustained a laceration on his right leg above the knee that required sutures and hospitalization.",1
An employee slipped and fell while opening an office door. The employee suffered a broken hip or leg bone.,1
An employee was aligning a machine press using his hands to guide the machine at the bottom. The machine fell into place and crushed his right index finger resulting in amputation above the first joint.,1
An employee was cutting poultry using a band saw and amputated the tip of his right thumb.,0
"A live haul trailer backed into an employee as he walked through a trailer bay toward his workstation. He suffered injuries to his left knee and lower left leg (including an arterial injury) and was hospitalized, requiring surgery.",1
"An employee was walking beside a 12-ton bulldozer, holding a dirt grading rod. The bulldozer, moving in reverse, struck and fractured his left femur and right foot.",1
A nurse was bitten by a patient on her right thumb and left chest area. The injuries required surgery.,1
"An employee had been installing blocking on a roof. The employee slipped and fell approximately 12 feet off the roof and sustained a fractured left ankle, a fractured left elbow, and a fractured and dislocated right elbow.",1
"On September 21, 2020, at approximately 9:00 a.m., an employee was driving a golf cart on the golf course when he lost control of the vehicle, jumped from the golf cart, and impacted the ground. The employee was hospitalized with a fractured right arm.",1
"An employee stepped onto a rolling ladder while cleaning a mixing bowl on an elevated bread line. The employee fell 4 feet, suffering a severe injury to the right knee that required hospitalization for surgery.",1
An employee was performing demolition work and was pulling on an overhead three-inch vertical PVC pipe. The pipe broke off and struck the employee in the head.,1
An employee was dumping lime in a field when a hydraulic line broke in his tractor trailer causing the truck to tip over. The employee was hospitalized with three cracked vertebrae and a bruised lung.,1
An employee was operating a mill machine when the rollers of the mill machine grabbed his left hand fingers. The employee sustained partial fingertip amputations of the left ring and middle fingers.,0
An employee's foot got caught in the belt of a pulley system. The employee's lower right leg was fractured.,1
An employee was inspecting the insulation of a drag conveyor when a piece of angle iron fell into an opening in the housing. The drag conveyor then contacted the angle iron causing it to strike an employee's left thumb. The employee's thumb sustained a deep laceration.,1
An employee was walking through a store backroom when she slipped and fell on her knee. She was hospitalized for a fractured knee cap that required surgery.,1
"Two employees were operating a side-by-side UTV on a forest road and were involved in a head on collision with a pickup truck. Employee 1 suffered a compound fracture to their left femur, a laceration on their left calf, and a laceration just below the right kneecap. Employee 1 was hospitalized and required surgery. Employee 2 sustained shoulder and neck injuries and was treated and released.",1
An employee was replacing a membrane in the reverse osmosis system and partially amputated two fingers.,0
"On September 21, 2020, an employee was walking into an apartment building to conduct interviews with individuals at their private residences when she tripped on an incline and fell resulting in a fracture in her third lumbar vertebra.",1
An employee who had been driving for a long period of time got out of the driver's seat of a parked bus and felt a sharp pain down their lower right leg due to a lumbar sprain.,1
"An employee was riding in the bed of a company pickup truck stabilizing the motor that was being brought over to the dumpster for disposal. When the truck came to a stop, the employee lost his footing and fell out of the truck bed on the driver's side and struck the back of his head on the driveway pavement. The employee suffered a laceration to the back of the head and a skull fracture.",1
"A work crew was unloading a used 35-foot power pole to a residential site. The pole rolled off the digger derrick truck, fell approximately 30 feet, and landed on the injured employee. The employee was hospitalized for a concussion, a fractured shoulder and ribs, and internal injuries.",1
An employee was descending 3 to 4 stairs when he fell to the floor and hit his head. He was hospitalized with a skull fracture and subdural hematoma.,1
"On September 22, 2020, an employee was moving a new log splitter when it struck a pallet on the floor, causing the arm to come down on the employee's hand. The employee suffered an amputation of their middle finger. Their ring finger was able to be reattached.",0
An employee was on a one-step ladder stocking shelves. Her foot slipped as she stepped backwards off the step ladder and she fell onto her right knee. Her tibia was fractured.,1
"While pushing an aircraft out of a hanger using a tow truck, an employee was struck by the aircraft causing fractures to both legs.",1
An employee was arranging pipe on the trailer. When he went to get down from the trailer the employee slipped on an oily surface and lost his footing. He fell off the trailer and landed on his right side fracturing his hip.,1
An employee was operating a plastic trimming machine when the trimming blade amputated their right ring fingertip.,0
"A truck driver was attempting to drain waste milk from a tanker into a designated disposal area. The liquid in the tanker would not drain and the driver contacted the injured employee for assistance. The injured employee drove to the disposal site to investigate. The disposal site (owned & operated by a separate employer) provided a PVC pipe with a scoop at the end of it for the injured employee to take a sample of the liquid in the tanker to determine why the liquid would not drain. The injured employee climbed to the top of the tanker. During the maneuvering of the PVC pipe into the liquid, the handle of the pipe contacted an overhead electrical line and the injured employee received an electric shock. The employee then fell approximately 15 feet to the ground. The employee suffered a broken back resulting in paralysis and hospitalization.",1
"An employee was operating a mini skid steer. As he exited the skid steer, his foot was wedged between the arm and the cab of the skid steer causing him to fall forward and snap his foot. Three toes were degloved and one bone in the foot was dislocated.",1
"While performing maintenance on a forklift, an employee cut their right arm on a firewall (sheet metal material).",1
An employee slipped off the wet step of a truck and tore a tendon in his knee.,1
"On September 22, 2020, an employee was troubleshooting a problem with the tub conveyor on the tub press packing line. The employee entered the automated machine and stepped up onto the magazine between the tub feeder and the conveyor. The employee's foot slipped into the void between the tub feeder and conveyor and the tub feeder activated, pinching the employee's leg. The employee was admitted to the hospital for a broken left leg and muscular damage.",1
"An employee fell down stairs to a landing, suffering head injuries.",1
"An employee was walking down interior stairs and fell to the first landing, sustaining head injuries.",1
An employee was operating a pallet jack when the jack struck a metal storage rack and the employee's left calf was lacerated. The employee was hospitalized for surgery.,1
An employee was driving a rider jack when his load was struck by a forklift's load. He fell off the rider jack and hit his head on the concrete floor. The employee sustained an injury that required stitches.,1
"An employee made a cut with a saw, turned the saw off, and struck the still spinning blade as he reached for the cut piece. His fingers were lacerated.",1
An employee was unlocking twist locks on a catwalk on a container ship. He fell through an open access hatch and sustained six broken ribs and a bruised lung.,1
An employee was scooping cleansing chemicals into a vat filled with hot water. The hot water erupted and spilled onto the employee. The employee suffered thermal and chemical burns to their eyes.,1
An employee was attempting to reconnect a pin that holds a transition deck to a commander unit when his right index finger was caught between the two pieces of equipment resulting in a fingertip amputation.,1
"An employee was using a sledgehammer to loosen dirt from the inside of an excavator bucket. A piece of the bucket tooth broke off, struck the employee's right leg, and lacerated it.",1
An employee was walking through closed fire doors and hit her left elbow on a door. She sat down on the floor to avoid falling. The employee sustained a laceration to the left elbow requiring hospitalization.,1
"An employee was loading boxes onto a trailer when a 40-pound box fell and landed on his right foot, resulting in amputation of his right toe.",1
"On September 22, 2020, as an employee was removing a concrete form, the bottom piece of the form fell onto the employee's left foot, resulting in a crushing injury to the foot/toes.",1
"An employee was changing oil on a forklift when an oil wrench was dropped on his face. He sustained a concussion, a fractured nose, and an abrasion.",1
An employee was performing roofing work from inside a man-made box attached to a forklift and fell 20 feet to the lower level.,1
A 4' x 4' bundle of polyfoam insulation board fell from the crane rigging and struck an employee on the upper back. The employee was hospitalized for fractured vertebrae in the neck.,1
"On September 22, 2020, at 9:15 AM, an employee was assisting with drawing blood from a sick cat. The cat bit her left index finger. Later, her finger became swollen and she was hospitalized, requiring surgery on her hand.",1
An employee was hanging live birds onto a shackle line when he fell from the conveyor onto the ground and broke his left leg.,1
"An employee was on an auto picker machine approximately 10 feet in the air selecting orders. The employee lost balance and fell to the ground resulting in a fractured hip, femur and ribs.",1
"An employee fell off a ladder at a second story height while working on a residential home. The employee was hospitalized with five broken ribs, a concussion and a back injury.",1
"On September 22, 2020, an employee was lifting a die with an overhead gantry crane and a four-legged lifting device. His right index finger was partially amputated when it was pinched between a lifting leg and the die.",0
"An employee was breaking down boxes. The employee tripped over a box and fell to the ground, suffering wrist and hip injuries. The employee was hospitalized.",0
An employee was moving a piece of material weighing approximately 40 lbs. on the radial arm saw when the material fell and crushed her left index finger. The finger was fractured and partially amputated.,1
An employee tripped over the threshold of a door and fell striking their forehead on the floor. The employee sustained a concussion.,1
"An employee was removing a wheel and tire assembly from the safety inflation cage. The wheel and tire assembly failed and the employee sustained a concussion, a fractured jaw, and broken teeth.",1
An employee was struck by a forklift moving in reverse. His leg was caught between the forklift and a stack of doors on a pallet resulting in fractures to the left tibia and ankle.,1
An employee was repairing the belt on a thatching machine when his thumb was caught between the belt and pulley and amputated below the nail bed.,0
An employee was injured while trying to restrain a patient. The patient fell on top of the employee's leg causing multiple fractures.,1
"On September 22, 2020, an employee was assisting an excavator operator. As the employee approached the excavator to unstrap a pull barn pole, the employee was struck by the pole and fell to the ground. The employee sustained a head injury.",1
"An employee was under a truck taking the transmission out. The truck, which was supported by blocks, fell and the gas tank pinned the employee to the floor. He sustained injury to the hips, leg, and lower back.",1
"An employee was using a pallet jack to unload boxes of furniture from a trailer. A box of furniture was sitting on a pallet that was partially shattered. As the pallet was pulled, it completely shattered causing the furniture to fall onto the employee. The employee suffered displaced fractures to both bones in the right ankle.",1
An employee was picking up hurricane debris and was bitten by a copperhead snake on two fingers on his right hand. The employee was hospitalized for treatment.,1
"On September 22, 2020, an employee slipped off the step while exiting the cab of a commercial truck and fell to the parking lot pavement. The employee sustained a head injury.",1
An employee tripped on an electrical cord in the walkway and fell to the ground on his shoulder.,1
An employee was filling the pressure washer with gas. The tank slipped from his hand and fuel splashed onto his legs. The gas was ignited by the hot engine and one of the employee's legs was burned.,1
An employee performing roofing activities on a roof fell approximately 12 feet to the gravel surface below. The employee was hospitalized for a fracture injury.,1
An employee was loading a forklift onto a trailer during night operation. The employee stepped down off the forklift and into a small hole in the trailer floor resulting in a fractured lower right leg and hospitalization.,1
An employee's finger was struck by the extractor bar on a frozen food machine as it cycled. The employee sustained a partial amputation of the right index finger.,0
"On September 23, 2020, an employee had been decommissioning a bundle puller on a flatbed trailer. The employee went to descend from the trailer, swung his leg over the side of the trailer and lost balance, falling into the forks of a forklift that was parked parallel to the trailer. The employee was hospitalized with broken ribs and a possible spleen injury.",1
"An employee was picking up a portable band saw and a long piece of all-thread. As his left hand lifted the blade portion of the saw and the all-thread, the trigger was squeezed and his left index finger was pulled into the saw resulting in amputation of the fingertip.",0
An employee was directing traffic and was struck by a forward-moving forklift that was carrying three bundles of lumber. The employee's left lower leg was amputated.,1
The injured employee was holding an adjacent pen gate open when a forklift struck an overhead pipe and the pipe struck the employee in the back of the head. The employee sustained a head laceration/hematoma.,1
"An employee was clearing a clog in fiber processing equipment when his hand came in contact with a moving part, injuring his fingers and resulting in an amputation.",0
An employee fell from a portable A-frame ladder while pulling boxes of records from a storage rack. The employee suffered contusions to the back of the head.,1
"On September 23, 2020, at 4:00 PM, an employee was guiding a precast cement structure that was being lifted by an excavator. The load shifted and the lifting cable caught his fingers against the cement structure. The tip of his thumb was amputated.",0
An employee was using a grinder to cut a barrel. The grinder caused a spark that ruptured the barrel.  The employee sustained a burn to the abdomen requiring hospitalization.,1
"On September 23, 2020, an employee was reversing a stand-up powered industrial truck (PIT) and struck a warehouse rack pole. The employee was hospitalized with a crushed left foot.",1
"An employee was unloading a truck with an electric pallet jack. When he crossed an entryway that connects two areas in the warehouse, the pallet jack collided with a forklift. The employee suffered an injury to his left foot.",1
A vehicle traveling through a work zone struck a traffic control worker. The employee's right leg was fractured in three places. The employee also sustained a fractured pelvis and a possible left leg fracture.,1
An employee was walking down a wooden staircase and lost his footing. He fell approximately 4-5 feet and suffered a major tear(s) to his quadricep muscles.,1
An employee was walking through the outdoor courtyard when she fell to the floor and fractured her tibia and fibula. She was hospitalized and required surgery.,1
An employee was injured while guiding a buggy cart that was coming down a ramp. The buggy cart got away and struck his leg. The employee was hospitalized for a fractured leg.,1
"An employee was in a lift bucket 10-12 feet off the ground, cutting a tree branch that was 8-10 inches thick. The branch split up the middle 3-4 feet above the employee's head, snapped back, and struck the employee in the torso. The employee suffered injuries to the liver and kidney, as well as a broken arm.",1
"Employee 1 was replacing a bucket (480-volt breaker) while Employee 2 was observing from outside the arc flash boundary (36""). Employee 1 completed the work and was closing the door when an arc flash occurred. Employee 2 sustained first degree burns on the forehead and cheek and first and second degree burns to the hand. Employee 2 was hospitalized. Employee 1 was not injured.",1
"On September 23, 2020, at 8:40 AM an employee was connecting a male connector to a female connector. The male connector was attached to an air-operated ram. The ram retracted and amputated the employee's index finger.",0
An employee was sitting in a chair when she fell out of the chair and struck her head on the edge of the counter. The employee was hospitalized.,1
"An employee had been cutting concrete. After he finished, he was moving the concrete saw to a different spot when it lacerated his left shin.",1
"The injured employee was assisting a drill operator. As the employee was removing debris from the machine, his left hand was caught in the machine resulting in a finger amputation at the first joint, lacerations and a broken wrist.",0
An employee was using industrial shears to cut bands from stacked lumber. The loose lumber then struck the employee's left leg and fractured his ankle.,1
A belly dump truck was hauling dirt on a construction site when it tipped over onto its side. The driver was hospitalized with fractured ribs.,1
"An employee propped a 6-foot step ladder up against the wall and as he was climbing up it, he fell off the ladder and was hospitalized for a hairline back fracture.",1
An employee squatted down to observe a non-working conveyor roller. His gloved left index finger was caught in a rotating chain underneath resulting in a fingertip amputation.,0
An employee was unloading his truck when he fell off the back of the trailer. He landed on the ground and sustained broken ribs.,1
An employee was repairing a tube bender machine when a component of the machine shifted and caught the employee's left ring finger in a shear point. The finger was amputated from the nail to the fingertip.,1
An employee was troubleshooting the injection molding machine and amputated their left ring finger.,0
An employee was adjusting the height on 4-foot exit conveyor when it became unstable and tipped over onto the employee's left leg. The employee sustained a fractured left leg that required surgery.,1
Two employees were raking concrete in front of the concrete screed in a work zone. A semi-trailer entered the work zone and struck the concrete screed. The concrete screed then struck both employees and knocked them to the ground. Employee 1 suffered a fractured left leg and a laceration to the back of the head and was hospitalized. Employee 2 suffered contusions to both knees and the chest and whiplash. Employee 2 was treated and released.,1
"An employee was operating a standup clamp truck, transporting a large box (washing machine) across a facility. As the truck passed a structural support beam, the corner of a clamp at the back struck the beam. The resulting jolt caused the employee to fall out of the truck, which continued to roll forward and struck the employee's foot. The employee suffered a partially amputated big toe.",1
An employee was operating a vertical lathe and using sandpaper to deburr the sharp edges of material on the machine. The sandpaper or the employee's glove got caught on the edge of the spinning part and the employee's right hand was lacerated.,1
"On September 24, 2020, an employee was injured when the tugger he was operating was struck by a second tugger. The employee was hospitalized for rib fractures.",1
An employee fell down an exterior staircase and injured his right leg.,1
An employee was walking across the warehouse and was struck by and run over by a forklift that was operating in reverse. The employee sustained a fractured right shoulder and left leg.,1
An employee was checking the blower on the truck when his left hand was pulled into it resulting in a partial amputation of the left ring finger.,0
"A cable operator was staging a reel into the payoff. As she was attempting to manually position the shaft into the hole, her right thumb was caught between the metal reel and the drive arm plate resulting in a below the nail bed thumb amputation without bone loss.",1
"An employee was returning census equipment when she tripped on a curb and fell onto the sidewalk, fracturing her hip which required hospitalization and surgery.",1
A delivery driver was on a ride-along with a fellow employee. The driver fell down some steps as they were leaving an address resulting in a left leg injury and an broken ankle that required surgery.,1
"On September 24, 2020, an employee fell while riding on the bottom step of a reach stacker and was run over by the rear wheel, sustaining a crushed pelvis and left leg amputation.",1
An employee was clearing a package jam on the conveyor line. Her foot got caught underneath and she sustained a broken ankle.,1
"Two employees were working as flaggers for a construction site and were assisting a truck driver back out of the site. As the truck was backing out onto the service road, a motorist struck one of the flaggers who was in the street. The employee received head and bodily injuries. The employee was hospitalized for surgery.",1
An employee was operating the rolling machine and crushed their left index finger and thumb. The index finger was amputated.,1
"An employee was putting steel bands on a cardboard bale at the baler. She stepped back, tripped, and fell backwards resulting in a broken forearm.",1
"On September 24, 2020, at about 7:20 AM, an ATV unit agent was assisting in the apprehension of three suspects. While working the group via the ATV, one suspect ran out of a cornfield in front of the ATV. The agent applied the brakes to avoid striking the suspect, flipping the ATV in the process. The ATV then rolled over the agent. The agent was hospitalized for a fractured scapula.",1
"An employee was making a metal platform. As the employee was moving the metal platform with a half-ton jib hoist to weld the platform, the strap broke and the metal platform struck the employee knocking him to the ground. The employee sustained fractured vertebrae.",1
"An employee was pushing a metal mold onto a shelf. When the employee pushed on the top bar, it glided and the employee's right middle finger was pinched between it and the surface of the mold. The fingertip was amputated from the bottom of the nail to the top.",1
"An employee's finger was caught by a material feeder's screw conveyor, causing a partial amputation.",1
An employee was preparing to take out cardboard recycling with an electric ride-on pallet jack when his foot became caught between his pallet jack and a stationary pallet jack. His left foot was crushed and sustained a muscular injury requiring hospitalization.,1
An employee was walking out of a box truck when he lost balance and fell. He put his arms out and his left hand caught on the truck loading ramp. The middle and ring fingers were crushed to the nailbed.,1
"During a crane lift, a piece of temporary support steel fell from the load that was being lifted and struck the crane's signalman. The signalman sustained fractures to the leg and ankle.",1
An employee was taking the cap off a pressurized fire hydrant. The cap blew off and struck the employee in the right leg fracturing the tibia and fibula. The employee required surgery.,1
An employee was pouring the shower pan and fell from the second floor deck to the ground floor. The employee was hospitalized for fractured ribs and facial fractures.,1
"An employee was using a chainsaw to trim a tree on the shoulder of the highway. The employee either lost his footing or was hit by a branch and fell from the tree, landing on one side. The chainsaw landed on his other side. He sustained a compound fracture to one leg.",1
"On September 24, 2020, at approximately 11:00 a.m. an employee was walking from an area to the next well. A guide bar for the rear drilling area was lodged on a matting board. As the employee attempted to dislodge the guide bar, he was struck by the bar resulting in a fractured lower right leg.",1
"An employee was trying to remove a sheet pan from a dish machine, where it was causing the dish racks to jam. The momentum of the racks re-latching onto the dish conveyor dislodged a sheet pan in the next rack, which fell onto the employee's left hand and severely lacerated the ring finger.",1
"A letter carrier was bitten by a dog, leading to a wound on their right calf.",1
A trail guide was bucked off while attempting to get on his horse. He landed on his right side and fractured his hip and wrist.,1
"After finishing work on a fence, an employee started picking up tools to put them in a golf-cart. The employee was in front of the golf-cart when it struck her. She sustained several fractures including a broken leg and ankle that required surgical repair.",1
An employee fell 15-18 feet through a vent opening while cleaning a construction site and suffered multiple fractures.,1
"An employee was loading liquid fertilizer from the safety rack onto a tank that was on the trailer of a truck. The truck moved and pinched the employee's leg between the safety rack and the trailer. The employee was hospitalized with two broken bones in the right leg, located 14 inches above the ankle.",1
"The driver of a full-sized bus was replacing a set of drive belts that had broken/frayed while he was on route with a busload of passengers. While doing so, his hand was caught between the crank shaft pulley and a belt resulting in severe lacerations to fingers and a fingertip amputation.",1
An employee's right middle fingertip was amputated while working on a crimping machine.,0
An employee was about to inject a vaccine into a chicken when the chicken struggled and the employee injected the vaccine into her own wrist.,1
"An employee was getting tools from a tool box. The box's lid struck the employee's head, causing a scalp laceration.",1
"An employee fell while moving from a roof to a ladder. The employee landed on the ground and a metal grate, about 10 feet below, and suffered a broken left wrist; a broken nose; and lacerations to the right foot, right knee, and right-side forehead.",1
"A crew member developed chills, nausea and vomiting. He was hospitalized for pneumonia.",1
"An employee was stepping up to a platform approximately 24 inches off the ground when he lost balance and fell backward, fracturing his elbow.",1
"On September 25, 2020, at approximately 3:00 a.m. a maintenance employee was investigating liquid on the shackles on Line 2 in the evisceration department when, while dabbing the liquid with his gloved hand, his glove became caught in the chain line above a shackle resulting in the partial amputation of his right middle fingertip.",0
An employee was clearing a jam on the straw machine and amputated their right middle finger.,0
"A crew was using a hydraulic tunneling jack to push a carrier pipe into a tunnel. An employee was adjusting the rigging on the tunnel jack machine when the push plate became dislodged from the end of the pipe and fell. The plate struck the employee and came to rest on the backside of the tunnel pit. The employee sustained a compound fracture of the left humerus, a fractured right ulna, and lacerations to the head and knees.",1
An employee was collapsing a portable paint booth when the booth tipped forward and landed on them. The employee sustained fractured ribs.,1
"An employee was using a push-pull slam wrench to land a base section of a wind tower. The tool struck the employee's abdomen, causing a mid-section hematoma.",1
"An employee was making a 13-inch bushing on a vertical turning lathe. The lathe moved down and in, causing the chuck to break free and strike the employee's left ankle. It broke the ankle and lacerated the employee's left foot.",1
"An employee was climbing down a ladder. He fell, landing on the ground less than 4 feet below. He was hospitalized.",1
"An employee was setting a coil of steel on an arbor of a steel slitting machine. As he was picking up something on the floor, an opening of the arbor caught his right ring finger, causing the amputation of the fingertip.",0
"While putting up some tube steel, an employee was climbing up an extension ladder. The ladder's feet slid out and the employee fell about 10 feet to the ground, landing on both feet. The employee was hospitalized with a fracture in the top of his right foot.",1
"An employee was completing a quality check at the coating section of the paper machine. As the employee was clearing a coating buildup from the applicator roll, the employee's left hand was caught in a nip point between the applicator roll and coater roll and crushed.",1
"An employee was removing a sensor from the wellhead when a pressure release caused the sensor to blow into the employee's chest. The employee was knocked backward eight feet and landed on piping. The employee sustained a broken collar bone, humerus, and femur and a right leg laceration.",1
An employee was assaulted in a parking lot after closing a store. The employee was hospitalized.,1
An employee was operating a tablet press that presses powdered material to form pills. The powder was not flowing evenly into the machine. The employee was moving excess product back into the feed frames and dies when her left index fingertip and fingernail were amputated.,1
"An employee had finished his delivery route and returned to his work facility. He then began to experience heat stress and dehydration symptoms such as cramping, vomiting, and tongue swelling.",1
"An employee was measuring a second-story window from the inside. The employee fell out of the window to the ground, suffering an injury to a major artery and fractured ribs, both injuries requiring surgery. The employee was hospitalized.",1
An employee's right ring finger was caught between the valve body and valve disc during a function test of the actuator/valve assembly. The fingertip was amputated.,0
An employee was running wood through a moulder and crushed both middle fingers. One finger required surgical amputation.,0
"An employee was preparing to put the nip on the railing system. The nip did not roll in straight. While rolling the nip back out, the bolts broke and the nip fell onto the employee's left foot fracturing it.",1
"An employee removed a semi-refrigeration unit from the semi-trailer to repair it. After repair, the employee was putting it back on the semi-trailer, but the bolts did not line up. As the employee tried to adjust the bolts, his left index finger was caught between the refrigeration unit and the semi-trailer resulting in amputation of his nail and a quarter inch of his finger.",0
"An employee was tilting a floor grinder back when the handle released, causing the employee to fall to the floor and break his hip.",1
An employee was clearing a piece of cheese from a packaging machine when the rotating equipment cut palm the employee's right hand and amputated their right index finger.,0
"An employee was making improvements to a railing on an upper floor of a steel structure. The employee fell 14 feet through a roof opening to a lower level and sustained seven broken ribs, and fractures to the wrist, elbow, and pelvis.",1
An employee was working on a wind turbine when an arc flash burned their hands and back.,1
An employee was deboning the head of a carcass. His knife slipped and stabbed his left hand.,1
"An employee was checking to see if the outrigger wire was tight enough. He grabbed onto the outrigger wire and it slipped, causing him to fall approximately 20-25 feet from the platform and into shallow water and a riverbed road below the bridge. The employee suffered multiple arm and leg fractures.",1
"An employee was installing insulation at a customer's house. As he was climbing down an A-frame ladder, it shifted and he fell. His arm was pinned under the ladder and broken.",1
An employee was removing the trailer hitch from a customer's vehicle at the carwash. A second carwash customer pulled up behind the employee and pinned him between the two vehicles. The employee sustained a fractured spine and lacerated liver.,1
"An employee was measuring a pallet. A forklift drove into him, and its own load of pallets pinned him against the pallet he was measuring. He suffered severe bruising around the ankles and a broken heel bone.",1
An employee was treating rooms with bleach for mildew. He suffered a serious asthma attack and was hospitalized.,1
An employee was on the roof over a garage to install a gutter above the garage. He slipped and fell approximately 10 feet onto the concrete driveway. He sustained a fractured skull and a broken wrist. Fall protection was not worn at the time.,1
"While removing a tire from the wheel of a semi-truck, an employee's left ring finger was caught between a tool and the wheel. The finger was partially amputated.",0
The associate was going up to the roof to check the air conditioning unit. The associate jumped off the ladder on his way down and landed awkwardly on the concrete resulting in a left leg sprain and tear.,1
An employee was cutting the heads off a solar panel harness when he touched the torque tube (metal frame on solar panel) and was shocked. He suffered a loss of consciousness and had an irregular heartbeat.,1
A temporary employee was handing barrels to another employee off the back of a truck. A barrel fell on top of another barrel and the temporary employee lost balance and fell off the truck. The employee sustained a broken pelvis.,1
"At about 5:20 p.m. on September 26, 2020, an employee was on a table about 2 1/2 feet high, checking for a blockage in a metal chute that deposited sirloin onto an overhead conveyor. The employee fell, and their right little finger became lodged between the chute and a metal shield used to prevent product from falling off the conveyor. The fingertip was amputated at the last joint.",0
An employee was closing a tanker of milk and pushing the valve in to lock it in place when his right index finger was caught in the valve mechanism and amputated.,0
While an employee was removing the wooden shipping frame from a bundle of metal purlins the purlins shifted and pinched his left middle finger between the purlins resulting in an amputation.,0
"An employee was installing cement board siding from a stepladder. The employee fell 8-9 feet from the ladder, suffering several broken ribs and a punctured lung.",1
"An employee was servicing bait stations on the exterior of a facility. The employee was stepping over an air conditioning supply line which was 8-10 inches above the ground, when his left foot was caught on the line. His leg twisted, causing him to fall and fracture his left femur.",1
"At approximately 9:30 p.m. on September 26, 2020, a Nesco Resource employee retrieving a diaper that had fallen between the rollers on a running conveyor when her hand was caught in the belt/pulley system resulting in a partial amputation of the left index finger.",0
An employee was on a 24-foot extension ladder doing touch up work on cornerbead at a window. The ladder slipped on paper that was protecting the floor and the employee fell. The employee sustained a broken femur and arm.,1
The injured employee was spreading rubber pellets across a track and was struck by a forklift that was moving a super sack of rubberized pellets. The injured employee suffered fractures to both legs.,1
"On September 26, 2020, the cable line of a workover rig failed, causing the block to fall and strike a platform where an employee stood. This caused the employee to fall from the platform. The employee landed about 34 feet below and suffered broken bones and a laceration.",1
An employee was operating a forklift when it backed into the forks of another forklift. The forks lacerated the employee's chest.,1
"An employee was caring for patients. A patient struck the employee, who fell to the ground and suffered a broken left leg.",1
An employee was attempting to reset a sensor on the crane when their hand was pinched between the crane and an intermodal box resulting in finger amputations.,0
"A temporary employee was bagging the forming head on a packaging machine so the machine could be pre-rinsed. The forming head activated, coming into contact with the employee's left hand and partially amputating the middle finger.",0
"An employee performing a yearly routine maintenance task received second degree burns to the arms, shoulder, and neck and was hospitalized.",1
"On September 27, 2020, an employee's hand was caught in the rollers of a corn husker resulting in crushing injuries including fractures to the middle two fingers and hospitalization.",1
"An EMT was restocking the vehicle, when her co-worker leaned on the fire extinguisher expelling foam. The EMT developed shortness of breath and was hospitalized.",1
"An employee was operating a stand-up forklift. The forklift was about to hit a pallet and she jumped off; the forklift then rolled over her left foot, resulting in broken toes and a cut.",1
"An employee was on a ladder masking an area to paint. The beam the ladder was leaning on dislodged, causing the ladder to tip over and the employee to fall to the ground. The employee suffered a broken pelvis and was hospitalized.",1
"An employee was cleaning a moving conveyor belt. Her right hand was caught between the belt and an interior sprocket, causing lacerations and potentially broken bones. She was hospitalized.",1
"A census taker was hit by a vehicle while crossing the street, and suffered multiple broken bones.",1
An employee was operating a forklift while holding the spotters line. The slack from the line wrapped around the back wheel of the forklift and when the wheel moved it tightened and crushed the employee's left hand.,1
An employee was cutting shims using a circular saw. The saw kicked back and amputated the employee's left index finger.,0
"An employee was adjusting the forks on a material handler. The pin broke and the forks and shaft came down on the employee, breaking his left leg.",1
"An employee was unloading vehicles from a car carrier. As he was releasing one of the chains that held a car down, the car rolled backward and the chain caught his glove. His left hand was pinned between the chain and the aluminum deck, and the index finger was injured. He was hospitalized and the finger was medically amputated above the knuckle.",1
"Two employees were performing maintenance and repair on a press. Each one of them was standing on a ladder. One of them slipped on the third rung from the bottom of their ladder and fell about 3 feet, striking a protruding part of the press. The employee suffered broken ribs and a lacerated arm, and was hospitalized.",1
An employee was removing a head from a fitting assembly when her finger was pinched in the fixture. She suffered an amputation.,0
"A temporary employee was in the fields picking cucumbers when he became disoriented and lightheaded and developed cramps. He was hospitalized, suffering from dehydration/heat exhaustion.",1
"An employee was closing the garage doors on a new construction project. Two of his fingers were caught in the door/rails, and the fingertips were amputated.",0
"On September 28, 2020, an employee was closing a truck trailer door when his finger was caught in the joint of the door, resulting in an avulsion and the loss of a fingernail.",1
"On September 28, 2020, while walking in the facility, an employee stepped on a tacky mat and one shoe stayed stuck, causing her to lose her balance and fall forward. She landed on her left hip fracturing it and lacerated her left index finger as she tried to catch herself by grabbing onto the lockers. The employee was hospitalized for surgery.",1
"An employee was inspecting a truck and its load and making necessary adjustments. He fell from the driver's-side truck stairs and fell to the pavement, suffering a broken right leg and right ankle.",1
"An employee's hair was entangled in a conveyor. While trying to free her hair, her thumb was caught in the conveyor roller causing a fracture and laceration.",1
An employee was standing on the forks of a ride-on electric pallet jack which were raised approximately 9-12 inches from the floor to retrieve a box that was approximately six feet from ground level. The employee's knee gave out and the employee fell to the ground hitting the forks of the pallet jack in the process. The employee sustained a possible pelvic fracture.,1
"An employee was turning a forklift into an aisle. The forklift struck a pole, which caught the employee's left ankle and broke it.",1
"An employee slipped on grass near a break patio. He fell to the ground, broke his right fibula, and was hospitalized, requiring surgery.",1
Employees were unbinding a gondola cart door using a front-end loader. The gondola cart door sprung open and struck the employee in the upper back and neck area.,1
"An employee was driving a forklift up a ramp. His right hand hit the ramp wall. The first four of his fingers were crushed, and the cutouts on a propane tank he was holding lacerated his hand. He was hospitalized, requiring surgery.",1
An employee was shaping a piece of sheet metal when the tip of his right thumb was pinched by the material.,1
"An employee was using a press brake to form 2-by-2 metal sheets into a box. As he was retrieving a metal piece, his right hand was caught in the point of operation as the press brake activated. It closed on his finger tips, causing partial fingertip amputations to the right index, middle, and ring fingers.",0
"An employee was caulking a window from a ladder. The employee fell to the brick patio about 10-12 feet below, suffering a head injury.",1
"An employee was using a rope to move a sick cow out of a pen. The cow suddenly moved and the employee's fingers were caught between the rope and a saddle horn. His right index, middle, ring, and little fingers were amputated.",1
"An employee was operating a backhoe carrying a bucket full of dirt. He approached a wall and prepared to dump the dirt against it; as he was raising the bucket, the backhoe's front tire fell into a soft spot and the backhoe tipped over. The employee suffered a broken left femur.",1
A coral snake bit an employee. He was hospitalized.,1
"An employee was stung by a bee, lost consciousness, and fell, hitting their head.",1
An employee fell from a ladder while getting supplies from a storage room. The employee suffered two broken ribs.,1
An employee was feeding sheet metal into the transverse duct connector machine when his hand was pinched between the first set of rollers resulting in medical amputation of his left index fingertip.,1
"A lineman contacted an energized 7,200 single-phase line while pulling copper ground wire. The employee received an electric shock resulting in burns to the right shoulder, neck, chest, shin and thigh.",1
"On September 28, 2020, an employee was cutting straps with a round knife machine. The blade partially amputated his left middle finger, cutting through the bone.",0
An employee's left leg was caught under the rear tires of a moving forklift resulting in a compound fracture and hospitalization.,1
An employee opened a hatch on a pasteurizer. Hot water sprayed out and burned her hands and legs.,1
"An employee fell from a fence to the ground, landing on their feet. The employee suffered a neck injury and was hospitalized.",1
An employee was dismantling a boom when his left ring finger was caught between two pieces of angle iron resulting in amputation of the first digit.,0
"An employee was loading a rack, tripped on a step that was three feet high and fell hitting her head on the floor.",1
An employee was attempting to load a heifer into a trailer and placed a rope around the saddle horn to pull the heifer into the trailer. The rope slipped off the saddle horn and the loop in the rope quickly tightened around the employee's right middle and ring fingers due to the calf pulling back on the rope. The fingernail and skin was removed from the tip of his right middle finger and the right ring finger was fractured.,1
An employee was sanding underneath a second story roof eve and fell off the roof to the ground. The employee sustained broken bones and lacerations.,1
"On September 29, 2020, at approximately 1:45 a.m., an employee was visually inspecting a chain on top of the east scald cabinet of the kill floor when he slipped. To avoid a fall, he put his right hand down in the sprocket and chain. He was able to pull his hand free, but sustained two fractures to his middle finger, a fracture to his index finger and a laceration on the back of his hand that required surgery and hospitalization.",1
"An employee was working with a crane operator to load an auxiliary cab onto a platform. The employee used a pipe to ensure proper spacing between the cab and the other equipment previously installed on the platform. When the cab was lowered, the employee's right middle finger was pinched between the cab and the platform. The employee suffered an amputation to the finger.",0
"An employee was bent over, cutting a roof membrane with a razor knife. The employee fell through a gypsum panel to a concrete floor slab about 18 feet below, suffering spleen and liver injuries, head trauma, and broken facial bones.",1
An employee was replacing a chain on the palletizer machine when his hand was caught between the chain and sprocket. His left middle fingertip was crushed and surgically amputated. The machine was not locked out at the time.,0
"An employee entered a cardboard baler behind a heavy, 4 1/2-foot by 6-foot metal door. A forklift moving a load struck the door, which in turn struck and injured the employee.",1
"On September 29, 2020, an employee's fingers on both hands were crushed in a press brake machine while bending steel pieces. Eight fingers were amputated. Six fingers were reattached.",1
A contractor employee sustained a possible amputation of the left leg below the knee during explosive blasting.,1
"An employee was climbing a stepladder to check the coolant level on a roof. When the employee tried to open the cooling tower door, the handle broke off and he slipped and fell. He landed on his back about 3 feet below. He was hospitalized.",1
"An employee was starting to climb a utility pole after attaching the lower removable rung assembly. When the employee stepped on one of the rungs, it gave way and locked in place. The employee fell backward to the ground 4 feet below. The employee sustained back pain between the shoulders.",1
An employee's fingertip was amputated after being caught in a pinch point.,0
"An employee was struck by a powered industrial truck as he walked to a pipe rack. His right leg was pinched under the wheel and he suffered ligament and tendon damage. He was hospitalized, undergoing surgery.",1
"An employee was preparing to lift the averaging arm on a milling machine and place it in the locked position so the milling machine could back up and get into position to start a new cut on asphalt. The milling machine started backing up. Another employee grabbed the averaging arm by the end to help the first employee; it raised unbalanced, the opposite end teetered, stuck into the asphalt surface, and the end the second employee was holding lifted. The employee's right index and middle fingers were caught, lacerated, and fractured between the averaging arm and the milling machine. The index finger was medically amputated below the joint and the middle finger was amputated at the tip.",1
An employee was sitting on a handrail for a scene and fell backwards. She fell down approximately 6-8 stairs and landed on the floor. She suffered a right rib fracture.,1
"On September 29, 2020, an employee was showing a press to a coworker. When the employee grabbed the frame of the press, the press pivoted and fell over, breaking the employee's legs.",1
"An employee was closing a large security gate. A gust of wind pushed the gate, causing the employee to fall to the concrete ground and suffer a broken hip.",1
"A contract employee was driving a forklift in a warehouse. As he went around a corner in an aisle, his hand was caught, crushed, and lacerated between the forklift and a rack.",1
"An employee was straightening a counter in a hardware department. A bottle of liquid drain opener fell, and its cap and seal broke. The liquid spilled onto the employee, causing chemical burns to her right leg, face, and arms. She was hospitalized.",1
An employee was ascending a 12-foot ladder and fell when he was approximately half way up the ladder. The employee suffered a broken clavicle and collapsed lung.,1
"The injured employee was helping another employee unload pipe from a delivery truck. As an employee lifted pipes with a forklift, a shorter pipe slipped off the forks and hit a wedge, which hit a 4"" x 4""x 8' board. The board spun up and struck the injured employee in the abdomen, causing blunt force trauma to the abdomen that resulted in removal of part of the small and large intestines.",1
An employee was troubleshooting a bean huller when their right thumb was amputated above the first knuckle by the motor of the bean huller cyclone.,0
"On September 29, 2020, an employee was working on a warehouse roof. As he looked for an anchorage point, he fell through a skylight to the floor 12 feet below. He suffered a skull fracture and a spleen injury; he was hospitalized and his spleen had to be removed. Fall protection was being worn, but was not anchored at the time of the incident.",1
"An employee was walking to the walk-in freezer at the back of a restaurant. He slipped on some French fries that were on the floor near a potato sink, fell, and suffered a broken femur.",1
"An employee was disassembling metal racking. A piece of racking fell and struck the employee, causing head trauma. The employee was hospitalized.",1
"An employee fell while walking in a warehouse, injuring his left hip.",1
"An employee was stepping in and out of a cardboard gaylord container through a cutout, retrieving small merchandise items from the container. While stepping out of the container, the employee tripped on the bottom of the cutout and fell to the concrete floor. The employee suffered a broken right hip and was hospitalized.",1
"An employee was standing next to a bundle of purlins, guiding the telehandler operator to establish fork placement. As the forks were entering the top section of purlins, the top bundle slid down off the lower bundle, landing on the employee's right foot and trapping the employee. The purlins continued to fall, landing on the upper part of the right leg. The employee sustained a crushing injury, puncture to the right lower extremity, and a muscular injury.",1
"An employee was performing routine maintenance on a conveyor attached to rock crusher/screen equipment. While installing a new conveyor belt, the conveyor support assembly fell and struck the employee's legs. The employee suffered leg and possible knee injuries.",1
"An employee was standing on top of a fuel truck refueling another vehicle. He slipped and a 3/4-inch metal rod (connected to the truck's railing behind the cab) impaled his left thigh, entering from the rear of the thigh but not passing completely through.",1
An employee was struck by a vehicle while walking to deliver mail. The employee suffered a head injury and was hospitalized.,1
"An employee tripped while walking, hitting the floor and suffering a broken nose.",1
"On 9/29/2020, an employee was planting sugarcane when he began to feel ill. The employee was hospitalized due to heat stroke.",1
"An employee was leaving from the rear of a box truck. As he exited the box, the roll-up door dropped and pinched his left ring and middle fingertips against the truck's deck. The fingertips were amputated.",1
"An employee was cleaning the box chute for a crusher when his left hand slipped between the rollers while they were still turning, causing trauma to the hand and forearm and an amputation.",1
An employee was cleaning a deli slicer. The slicer activated and amputated part of the employee's right thumb.,0
An employee suffered five broken toes while delivering a package. He was hospitalized.,1
An employee was carrying a piece of glass (4' x 4') to a truck. When the glass was set down it shattered and lacerated the employee's right arm from his wrist to his forearm. The laceration required surgery.,1
An employee was unjamming a hopper and suffered a partial amputation of their left index and middle fingers.,1
"An employee was raising a scissor lift when his right hand was caught between the top rail of the lift and a pipe. The employee's middle, ring, and little fingers were broken.",1
"Employees were using an overhead crane to submerge metal I-beams and girders in a galvanizing dip tank. Other I-beams and girders were stacked on the shop floor waiting to be processed. The stack was bumped, causing three I-beams/girders (weighing about 4,000 pounds in total) to fall off and strike an employee's leg. The employee was hospitalized with multiple leg fractures.",0
An employee was lowering a boat from a trailer when a battery compartment on the tongue of the trailer exploded. The employee was hospitalized for multiple facial fractures.,1
An employee was cleaning the inside of a tanker trailer and became disoriented and unresponsive due to gases inside the tanker.,1
"An employee was loading filter media into a pleating machine when her right hand became caught between pleaters, causing contusions and lacerations.",1
"On September 30, 2020, an employee had just replaced a motor and belts for an aspirator fan blower motor. After tensioning the belt, the employee was rotating the assembly sheave to confirm the belt was properly seated. The employee's right index finger was caught between the belt and the sheave and the fingertip was amputated.",0
An employee was climbing an interior ladder to a rooftop. He slipped and fell to the concrete 10-12 feet below. He suffered a broken right hand and right foot and was hospitalized.,1
"An employee opened an overhead garage door on a dock. As the employee was looking for IT cables on the outside of the building, he fell off the dock and hit his head on the concrete about 4 feet below. He suffered a skull fracture and brain bleeding.",1
"The employee was working on a bearing assembly that was in a bench vise. As he was putting pressure on the part with a wrench to tighten it up, the part came out of the vise and started falling to the floor. The employee tried to catch it and pinched the tip of his finger between the falling part and the edge of the work bench resulting in a partial fingertip amputation.",0
An employee was assembling truss components with a pneumatic stapler. He was moving the stapler across the truss pieces when he crossed his foot and activated the stapler. The staple went through his leather work boot into the joint of his big toe.,1
"An employee was flipping a grate on a manual grinding line. As he was placing the grate on the table to lay it down, the grate came off the hook, fell, and crushed the employee's right hand.",1
"An employee was walking beside a scissor lift, operating it via remote control. The lift's wheel struck and broke the employee's left ankle. The employee was hospitalized, requiring surgery.",1
An employee was attempting to set pressure on a pressure release valve and lost control of the end of a fire hose. The hose struck the left side of his face causing a laceration and a fracture that required surgery.,1
An employee slipped and fell off a dumpster while throwing trash. The employee landed on the ground and suffered a head and neck injury.,1
An employee was holding a part in place at the opening to a tube bending machine. The machine crushed three fingers on the employee's left hand. All three were medically amputated.,0
"An employee was applying pipe identification to a pipe moving along a v-roller line. A support frame failed and the pipe fell over, injuring the employee's hips/pelvis and leg.",1
"On September 9, 2020, around 10:15 p.m. the injured employee was assisting a Dupont ENI mechanic repair a breaker by holding a flashlight for the mechanic when an arc flash occurred causing burns to the injured employee's face and hands.",1
An employee was spotting for a construction vehicle as it backed up. The vehicle struck the employee.,1
"After replacing a spring on an upset punch press, an employee was troubleshooting on the die side of the punch. The die moved and injured his right hand.",1
"An employee was working from an 8-foot stepladder, preparing a piece of plastic conduit to be glued. The spreader brace bowed, causing a rivet to fall. The employee fell to the ground and suffered a broken left tibia.",1
"An employee was carrying a pallet, tripped on a rock, and fell on the parking lot. The employee suffered a fractured upper right leg.",1
An employee was operating an electric pallet jack and caught his right hand between the pallet jack handle and a conveyor resulting in a soft tissue amputation on the distal third finger.,0
"On September 30, 2020, an employee tripped and fell in a parking lot, suffering a broken left hip.",1
"A postal employee fell down a flight of 5 stairs, suffered a ruptured spleen, and was hospitalized.",1
"A trainer was training a new employee on how to use a crimping machine. While the trainer was reaching to grab a device, the machine was activated and amputated the employee's right index fingertip.",0
The grinding blade on a deactivated meat grinding machine amputated an employee's right middle fingertip.,0
"An employee fell while climbing a poplar tree, landing on the ground about 30 feet below and suffering a broken femur, ankle, wrist, and pelvis, as well as minor compression fractures in his spine. He was hospitalized, requiring surgery to the femur.",1
"An employee was climbing from one catwalk to another. The employee slipped and fell to the concrete floor below, suffering broken ribs and a head injury.",1
"An employee was changing 4' fluorescent light bulbs using a 6' A-frame ladder. As the employee descended the ladder, he slipped from the third rung and fell to the tile floor. The employee was hospitalized for a fractured pelvis.",1
"An employee was checking a safety valve in a wind turbine hub. The valve separated from the mechanism and struck the employee's hand, causing a 2 1/2-inch laceration.",1
An employee was pushing a cart loaded with crated eggs onto a lift to load them into a truck. The cart rolled over and fell onto his lower right leg fracturing it.,1
"A temporary employee was tasked with releasing water from the pasteurizer. As she opened the main double doors, boiling water was released and the employee suffered burns to her hands and legs while closing the doors.",1
An employee was operating a forklift when his lower left leg struck the forks of another forklift resulting in a laceration and fractures.,1
An employee was at customer's job site to deliver rebar. The employee was hospitalized after his right leg was fractured by rebar.,1
"An employee's right foot was caught between a powered industrial truck and a curb at the receiving dock. The foot was injured, requiring surgery.",1
"An employee was cutting wood on a table saw when the wood kicked back and the employee's hand slipped, making contact with the saw blade. The left thumb was amputated at the knuckle.",0
An employee was on top of an elevator installing some components when his foot got caught between the elevator and a ladder crushing his big toe.,1
"An employee slipped and fell on the wet floor in the kitchen, breaking his hip. He was hospitalized and required surgery.",1
"On October 1, 2020, at 4:00 p.m., an employee fell while exiting the rear of his delivery vehicle with a package for delivery, resulting in hospitalization for a pelvic injury.",1
An employee fell to the ground as he exited the rear of a postal truck and sustained injuries to his pelvis.,1
An employee was in a man basket trimming a tree and caught their right thumb between the tree and the man basket control lever resulting in a partial amputation.,0
A forklift operator was dumping a dumpster when his left middle finger was caught between the forks of the forklift and the dumpster resulting in amputation of the finger up to the first knuckle.,0
An employee tripped while walking up stairs and fell resulting in a tibia fracture.,1
"An employee climbed up an extension ladder and began using bungee cords to secure a tarp to a railcar. He hooked one end of a cord and then pulled the cord so it would reach the anchor point for the other end. The cord broke causing him to fall backward off the ladder approximately 10 to 12 feet to the ground. The employee sustained fractures to the right knee and left ankle, and his left heel was shattered.",1
"An employee was sorting wood as it came out of a sizing machine. While removing a stuck piece of wood, the employee's hand was pulled into the running machine. The middle and ring fingers were partially amputated and the left pinky finger was fractured.",0
"An employee was starting a press. While feeding material into the die, a steel slug was ejected from the point of operation, struck the employee, and imbedded in their chest. The employee was hospitalized.",1
"On October 1, 2020, around 6:30 PM, the injured employee was operating an order picker to fill orders. Another employee struck a pallet, which was then pushed into the injured employee's order picker, causing the injured employee to lose balance and fall approximately 15 feet to the ground. The injured employee sustained a brain bleed and fractures to the skull, ribs, arm, and shoulder. Fall protection was not worn at the time.",1
An employee had been installing new blades on a wire chopper granulator. A metal shard got in the employee's left eye and the employee was hospitalized.,1
An employee was removing a piece of tape that was caught around a conveyor roller when his glove got caught by the tape and his arm was pulled in and around the roller. The employee's left forearm was fractured.,1
An employee was using an overhead crane to remove coils from machinery. The coil of metal fell and struck the employee. The employee was hospitalized for broken ribs.,1
"A bucket truck was being used to remove limbs from a dead tree. A primary limb was cut, struck the limb of another tree below, and fell to the ground. As this occurred, a smaller limb broke off from the primary limb and struck the face and hard hat of an employee who was acting as a safety spotter. The employee sustained a fracture above the right eye.",1
"On October 1, 2020, an employee was assisting a subcontractor with a valve packing repair. During the repair, the valve packing dislodged creating a chlorine gas leak. The employee was evacuating the area when the hose of her supplied air system pulled her mask off, exposing her to the chlorine gas. The employee was hospitalized.",1
An employee was feeding wood into a resaw when her glove was caught in the wood and her hand was pulled into the saw. The saw blades lacerated the knuckles of her left hand.,1
An employee was cleaning out the warehouse and burning cardboard boxes in a burn pile. A box had a paint can inside which exploded onto the employee causing burns to the face and hands.,1
"An employee was working in a grain bin when the employee made contacted with the auger, resulting in a right leg amputation below the knee.",0
An employee was on a derrick connecting drilling rods. His fingers were caught between a drilling rod and a winch line and a finger was amputated.,0
"An employee was getting a pair of shoes off a stockroom shelf for a customer. While descending the ladder, the employee lost her balance and fell to the concrete floor. The employee sustained a crushed L1 vertebra and a concussion.",1
"An employee was working on a streetlight fixture to be installed on a pole. The employee was caught between the lower boom of a bucket truck and a tool box, mounted on the bed of the truck. The employee suffered broken ribs and a collapsed lung and was hospitalized.",1
An employee amputated their right ring finger at the first digit while processing turkey hocks on a machine.,0
"While unloading restaurant equipment from a dolly, the dolly moved and an employee's finger was caught between the dolly and a stainless steel counter. The employee sustained a partial amputation of the right middle finger.",1
"On October 1, 2020, an employee was using a radial arm saw to cut 2x4's. An employee was removing a piece of cut wood when the teeth of the saw grabbed his gloves and pulled his hand into the saw. The left middle fingertip was amputated immediately and the ring finger was surgically amputated.",1
An employee was operating a bar support machine. The employee's left hand was caught and crushed in the bending area of the machine. Four fingers were amputated.,0
An employee was dismounting a TV from a wall mount at a customer's residence when his left hand was lacerated by the TV and/or the bracket on the wall. The employee required surgery.,1
"The injured employee was handing a tool to another employee when he lost his footing and fell into a pit, landing on the concrete floor. The employee sustained fractures to the left arm and femur requiring hospitalization.",1
An employee climbed a fixed ladder on the glass crusher to perform a product purge. The employee pulled the handle on the diverter box and the handle snapped and broke. The employee lost his balance and grabbed the side of the metal diverter box with his right hand. The diverter plate fell on his right hand and crushed it against the side of the metal box. The employee sustained a laceration to the index finger which developed an infection and required medical amputation of the intermediate and distal phalanges.,1
An employee suffered burns to their finger and arms from an arc flash and was hospitalized.,1
An employee was operating a walkie-rider. The walkie-rider would not stop and the employee's foot was crushed between the walkie-rider and a guard on a conveyor.,1
An employee was conducting an inspection in the parking garage and fell through a hole on the third floor. The employee sustained a clavicle fracture and lacerations.,1
An employee was troubleshooting a dicer and got caught between the belt and pulley resulting in amputation of the right thumb tip and tissue damage to an index finger.,1
"The injured employee was assisting in the off-loading and stacking of plastic pipe using a backhoe and sling. A piece of pipe was lowered to the ground. While the injured employee attempted to remove the strap from the backhoe bucket lifting hook, the backhoe operator rolled the bucket to release tension on the strap and his right hand was crushed between the backhoe piston and bucket causing injury to three fingers. The employee suffered a severed tendon and a fracture to the ring finger.",1
"While mopping the floor with hot water, an employee slipped and fell in the water. The employee sustained burns on the arms, torso, and buttocks.",1
"An employee slipped in water that was on the ground next to the sink, fell, and struck the back of her head. The employee was hospitalized.",1
A maintenance employee was moving a conveyor when it fell over and smashed his left middle finger resulting in a partial amputation.,0
An employee was walking out from under a mezzanine when a stack of totes fell from the mezzanine and struck her. She sustained a fractured right tibia.,1
An employee was operating a table saw when his finger was caught in the saw's blade and amputated at the knuckle.,1
"An employee was adjusting the photo eye on a conveyor line when his left hand was caught in the path of the diverter gate. When the diverter activated to switch lanes, the tip of the employee's ring finger was amputated.",0
"On October 2, 2020, an employee was hospitalized with chest pains after using a draw sheet to move a patient from a cot to a bed.",1
An employee went to manually move a pallet on a non-motorized conveyor because it was not moving. Another pallet began to roll forward and struck the employee's left middle finger. The fingertip was amputated.,1
"On October 2, 2020, an employee was struck by a motor grader while shoveling windrow. The employee sustained fractures to the right arm, right foot, and ribs.",1
"An employee was using an ATV to haul a trailer. While maneuvering between a building and a concrete bench, one of the trailer's tires got stuck on the bench, causing the employee to hit his head on the dashboard of the ATV. The employee sustained a cut on the top of his head.",1
"An employee was snipping a piece of wire off of a horizontal, temporary, piece of rebar. The rebar fell and struck the employee's thumb resulting in an amputation.",0
"While framing a residential structure, an employee fell approximately 20 feet to the ground and sustained fractured ribs.",1
"An employee was climbing a ladder when it slid out. The employee fell nine feet, making contact with the ladder and sustaining a bruised spleen and pancreas.",1
Employees were transporting a mobile elevated work platform (MEWP) through a doorway to another location in the facility. A support bar slipped out of position causing the MEWP to free-fall to ground level. An employee's leg was caught between the mast of the MEWP and the loading dock floor. The employee was hospitalized with a compound fracture of the lower right leg.,1
"On October 2, 2020, at approximately 8:45 AM, in preparation for cleaning activities, an employee crouched down beneath a conveyor belt. The employee lost balance and his left hand landed on the belt tension roller. He was pulled in between the roller and the belt, resulting in crushing injuries to the left hand and forearm. The employee was hospitalized and required surgery.",1
An employee fell from an extension ladder while working to correct a leak from a hydraulic hose fitting. The employee was hospitalized.,1
"An employee was using a trimming knife to trim a plastic container. The knife slipped, went through his protective apron, and punctured the right side of his abdomen.",1
"While directing a crane from the second floor on a new construction, an employee fell 18 feet to the ground and sustained a broken left elbow.",1
An employee was opening bags and mixing sand in a paint mixer. His left hand was struck by the agitator and fractured.,1
"An employee was clearing a jam in front of the wood sorter gate before the chipper in-feed conveyor. The jammed wood had pushed the sorter gate up to nearly the full-open position. The employee attached a chain-fall to one of the jammed logs. As the log was raised, the rest of the jam was relieved and fell on the conveyor below. The sorter gate then closed on the employee's right leg crushing it between the gate, a piece of wood and the surrounding frame. The employee's lower right leg was fractured.",1
"An employee suffered a collapsed lung while lifting a jet ski hull that was raised on a hoist, pushing it sideways four feet to the press, and lowering it into place on the bonding machine. The employee was hospitalized.",1
"While opening a steam-line valve on a pasteurization tank, an employee was sprayed by hot water and sustained burns to the left side of the body.",1
An employee fell 10-18 feet from a fixed ladder in a warehouse injuring his ribs and pelvis.,1
"On October 2, 2020, a forklift operator was adjusting the shackle on the back end of the forklift connected to a train of kiln carts when a front-end loader pushed the kiln carts from the opposite end. The forklift operator was pinched between the forklift and the kiln carts and both legs were surgically amputated below the knee.",1
An employee had responded to a downed light pole outside of the building and possibly sustained an electric shock.,1
"An employee was cleaning the rollers of a plastic extruder machine when he slipped or tripped and fell, becoming entangled in the rollers. The employee sustained cuts, broken ribs, and shoulder injuries.",1
"An employee was exiting a scissor lift. He was climbing down the three steps and missed the last step, fell backward and hit his head on the ground. The employee was hospitalized with bleeding in the brain.",1
An electrical contractor was shutting the door to a company vehicle and caught their right thumb in the door latch resulting in amputation of flesh from the thumb tip.,0
An employee was cleaning near high voltage cables and received an electric shock.,1
An employee was attempting to clear yarn that was being spun and starting to cluster at two large spinning cyclones. The employee's right thumb became caught between the spool of yarn and the yarn being spun resulting in amputation of the left thumb at the base of the nailbed.,0
"An employee had been filling water tanks on top of a flatbed trailer. The employee jumped three feet to the ground from a ladder on the truck. When he landed, his right ankle twisted and he fell, resulting in fractures to his right leg and ankle.",1
An employee had been digging a 3-foot hole to perform plumbing activities. The employee sustained a leg cramp and was hospitalized.,1
An employee was operating a buffer inside the electrical room to buff paint thinner onto the floor. The resulting vapor found an ignition source and an explosion occurred. The employee sustained burns to 43% of his body.,1
"After finishing setup, an employee was making adjustments to the tooling on a trimmer machine. The machine was activated and the employee's hand slipped. His left ring finger was caught between a cogged belt and a wheel. The finger was amputated at the first knuckle.",0
An employee was performing maintenance on the box machine when his left hand was caught between two gears in the machine resulting in amputation of the third and fourth digits.,1
"An employee was inventorying drums of chemicals and assisting a forklift driver when the forks became stuck in an elevated position. While dislodging the mast chain, the employee's right hand became wrapped around the chain and was pulled into the pulley system as the chain realigned. The employee sustained lacerations, three broken fingers, and a partial amputation of the index finger.",0
A stack of drywall sections on a construction site fell over. Five or six sheets fell onto an employee's right leg causing injury.,1
"An employee was standing on a ladder scaffold with a wood plank platform, about 4-5 feet above the ground, placing siding on a house. The plank snapped in half and the employee fell to the ground, suffering a broken ankle.",1
"An employee was trying to unclog a grinder's airlock. Metal paddles inside the airlock caught the employee's right index finger and thumb, amputating the finger right under the top knuckle and the thumb right above the top knuckle.",0
"During a training exercise, an employee was learning how to secure a chain and fell to his knees. The employee was hospitalized and required knee surgery.",1
"An employee was operating a triple pallet rider. While turning to the right to dispose of a pallet board, the pallet rider struck a support column and the employee's foot. The employee was hospitalized with fractured toes and a laceration across the top of the left foot.",1
"While walking in the front door, an employee tripped on a mat and fell to the ground. The employee was hospitalized with a contusion to the head and a fractured arm and leg.",1
An employee had been watching contractors unload equipment. The employee slipped on gravel and struck their head on a truck's bumper. The employee was hospitalized and received stitches.,1
An employee was clearing a rice milling machine and caught his left hand in the auger resulting in fractured bones in the hand and wrist and amputation of the left index finger.,0
A sanitation truck driver's arm was caught between his truck and a dumpster. The driver sustained lacerations on his arm.,1
"Two employees were moving a pallet of tower trays and beams using a hydraulic pallet jack when a board from the pallet became caught under one of the wheels of the pallet jack. An employee was removing the board when the hydraulics were released, lowering the pallet onto the employee's hand and resulting in partial amputation of the left index fingertip.",0
"An employee was checking bags at an entry gate, tripped and fell to the concrete ground. The employee fractured their right arm.",1
"On 9/28/2020, an employee fell from a ladder while reaching to perform ceiling work and injured his hip. The injury did not require medical treatment. On 10/04/2020, the same employee reinjured his hip while moving a couch and was hospitalized for treatment.",1
"On October 4, 2020, a WSL agent had been working traffic earlier in the day and experienced abdominal cramping. The employee was hospitalized with a heat-related illness and dehydration.",1
A maintenance employee was rotating a belt on the canter machine by hand to check the alignment on the belt after a new canter head and arbor shaft were installed. His left thumb was caught between the belt and the sheave resulting in an avulsion and partial amputation to the left thumb.,0
"An employee was performing scheduled maintenance on the side seal heater section of a filler. He was manually moving the heater bars back and forth when the cylinder engaged and retracted back from a closed position, pinching his finger between the heat bar and the frame of the sealer. He sustained an amputation to a finger.",1
"On October 4, 2020, an employee was working at the dryer section of a machine. While feeding felt paper into the reel of the machine, the employee's left hand became caught between the mandrel and the seal, resulting in fractures to the index and middle fingers.",1
An employee was lifting a pan of food and felt pain in his back.,1
An employee was using a drill to ream out carbon rollers when his right hand got caught on the end of the reamer and was amputated.,1
A bakery clerk was walking back to her work area from the freezer when another employee inadvertently stepped backward into the clerk's path. The clerk tripped over the other employee's leg and fell to the floor striking her head and left arm. The employee was hospitalized with a fractured left arm and head injuries.,1
An employee was operating a forklift and struck a bump. His left hand was crushed against the wall. The employee had surgery with an amputation to a finger.,0
An employee's right pinky finger was crushed by a concrete slab that was being transported on a moving belt. The employee sustained an amputation.,1
An employee was hospitalized due to respiratory distress after inhaling odor eliminator spray.,1
An employee was clearing a cup/foil jam on a filler when they were injured by the yogurt cup conveyor. The employee sustained lacerations to the left arm and left side and fractures to the left arm.,1
"An employee had been walking a surveillance round. The employee was found unresponsive, and had sustained a head injury.",1
"While removing sections of steel piping, an employee grabbed the cable of a winch. His left hand was pulled into the snatch block between the cable and pulley, crushing four fingers.",1
"On October 4, 2020, at approximately 11:45 AM, an employee was in the break area on her official break. She had an altercation with another employee and was hit in the face by a closed-fist, causing her head to hit the wall. The employee sustained a fractured jaw and two broken teeth. Her injuries required surgery and hospitalization.",1
An employee was screening bags at a security gate and lost consciousness. The employee was hospitalized for heat exhaustion.,1
An employee was moving the brake table attached to the drilling rig when his left ring finger was pinched resulting in amputation of the fingertip.,0
"An employee was feeding scrap foam (strings) into a pelletizer machine. The feed rollers caught his glove, causing an amputation of his left middle finger.",0
Two employees were driving company vehicles on a farm road when they collided at the top of a hill. One employee sustained a left broken leg.,1
A mechanic was moving a pump into a trailer when the pump slipped and fell onto the employee's right middle finger causing a fracture and a fingertip amputation.,0
"On 10/05/2020, an employee performing gutter installation/repair fell approximately 15 to 18 feet from a roof and sustained a broken ankle/leg. The employee was hospitalized.",1
"An employee was cutting a window blind when the saw jammed. As the employee tried to unjam the saw, the blade lacerated her right index finger and amputated her thumb.",0
An employee was delivering construction material. He suffered a back strain while reaching to lift a piece of material.,1
An employee was using a 4-foot shear to trim strips of cardboard when his left pinky finger was caught under the hold bar of the machine and crushed. The employee suffered an amputation injury.,0
Employees were repairing a distribution cable. One employee was trying to locate the faulty cable when it failed resulting in an arc flash that burned the employee's right wrist and forearm.,1
"An employee sustained head and neck injuries while removing a form panel that was used to form a pilaster as part of a concrete wall system. There were 12 clamping bolts originally holding the wall in place while the concrete was poured. Six clamping bolts had been removed prior to the employee ascending the wall. The employee's task was to remove four of the remaining clamping bolts while ascending the wall and then connect the rigging from the crane to the panel so it could be hoisted out of the area. When the employee was close to the top of the panel, the panel came free and tipped over. The employee was tied off to the panel utilizing a personal fall arrest system. The employee fell backward with the panel and landed on the ground. The employee was not struck by the form as it fell.",1
An employee was working on a pill cutting machine and amputated the tip of his left middle finger.,1
An employee was operating a forklift. The forklift left the roadway and overturned and the employee suffered a fractured left arm and leg.,1
"While on a route delivering mail an employee stepped out of their LLV onto soft/loose gravel, lost footing, twisted an ankle, and fell to the ground. The employee attempted to brace their fall with their arm which resulted in a broken shoulder blade.",1
"On October 5, 2020,  a mower operator was trying to make contact with the injured employee. The injured employee was walking toward the mower operator and stepped on the plastic chute on the zero turn mower deck. The mower turned and the injured employee's foot struck the moving blades causing the amputation of a toe.",0
"An employee had been leveling out a rock base in the storage yard. He tripped and fell on broken concrete, sustaining a knee laceration, torn tendon, and a punctured knee cap. The employee was hospitalized.",1
"An employee was walking out of an office, tripped over a box on the floor and fell. The employee was hospitalized for a hip fracture requiring surgery.",1
An employee was pulling some film from a double tray sealer when the cutter blade/heater came down and amputated part of her finger.,1
"Employees were disconnecting a motor tool with a pipe wrench. The pipe fell approximately 6 inches, pinning an employee's finger between the motor tool and the hand rails. The right pinky fingertip was amputated.",0
An employee was working on a loading dock while a box truck was backing up into the loading bay. The employee was pinched between the trailer and the rubber seating around the bay door. The employee suffered fractured ribs and a collapsed lung and was hospitalized.,1
"An employee was walking down the hallway when a forklift pinned them against a wall, resulting in a chest injury.",1
An employee was climbing down a ladder to enter a submarine when they fell 6 to 9 feet onto a metal deck. The employee sustained broken legs and internal bleeding in the lower legs resulting in surgical amputation.,1
"While climbing down a ladder, an employee slipped off the ladder and fractured an ankle.",1
"On October 5, 2020, at approximately 8:13 a.m., an employee was preparing to string a cast extrusion line. When the employee ducked under the winder to grab the rope used to string, the carriage moved forward and struck the employee in the face. The employee fell to the floor and struck their head on the floor resulting in a severe head injury.",1
"While using a battery powered reciprocating saw, an employee fell from a ladder to the floor. He fractured both wrists and was hospitalized.",1
An employee was struck by a tree that had just been cut and sustained trauma to the L4 and L5 vertebrae.,1
An employee was physically assaulted by a patient and was hospitalized due to multiple facial fractures.,1
"While cleaning a tube filling machine, an employee suffered a partial amputation on a left-hand finger when the machine was jogged.",0
An employee was checking material inventories in the warehouse when he fell onto a pallet striking the back of his head and losing consciousness.,1
While moving a box from a cage and grabbing for the box an employee suffered a collapsed lung.,1
"An employee was moving super sacks onto racks. The employee was standing on the second level of a rack, approximately 12 feet high, to guide the straps of the super sack onto the forklift blades. The employee stepped onto a board to move closer to the super sack and the board broke. As the employee fell his head hit the racking before landing on a super sack below the racking. The employee was hospitalized for fractured neck vertebrae.",1
An employee fell off the back of a work vehicle's bumper resulting in a head injury.,1
An employee's finger was amputated from their left hand while removing stuck lumber from a wood chipper. The machine was not guarded at the time.,1
An employee's right arm was caught in the mast of a forklift when the forks were lowered resulting in a forearm injury.,1
"The injured employee was operating a compact tractor with a seeder attachment on an incline to spread lime. The tractor overturned and the employee sustained a fractured clavicle, fractured ribs and vertebrae, and a fractured lower right leg. The employee was hospitalized.",1
"On October 5, 2020, an employee was pinned between a stand-up powered industrial truck and a storage shelf. The employee was hospitalized for possible broken ribs and facial lacerations.",1
"While erecting a scaffold, an employee was descending a clamp-on ladder when he fell approximately 20 feet to the ground. The employee sustained a dislocated shoulder and fractures to the toes, a  hip, and ribs.",1
"On October 5, 2020, an employee was welding on a diverter gate that is positioned with bearings. When rotating the gate, the actuator cylinder shifted and crushed the employee's right ring finger.",1
An employee was unloading hogs from a transport trailer and suffered a right ring fingertip amputation (no bone loss) and a crushing injury to the right middle finger.,1
An employee was pinned between the crane stairs and the left front bumper of a van. The employee sustained a bone fracture.,1
"An employee was preparing the molding machine for the shift by removing the sprue plug from the injector. When the sprue was removed, hot resin struck the employee's left hand and arm resulting in first and second degree burns.",1
An employee's right hand was caught in a pinch point between a cable and steel rods while he was shaking out steel rods at a new school construction site. His right thumb was amputated above the first joint.,1
"While performing maintenance on a machine, an employee sustained a partial amputation to his thumb when his hand became entangled in the chain drive and sprocket.",1
"While closing a safe door, an employee's finger was partially amputated.",1
An employee was driving a lift truck and caught his left foot between the lift truck and a bollard. The employee's left lower leg and foot were injured.,1
Two employees were preparing a vessel for cleaning. The injured employee was on the deck of the vessel handing pieces of plywood (temporary compartment covers) out of the side dive door to the other employee who was standing on the ground. The injured employee slipped and fell from the boat to the ground and suffered a rib injury.,1
An employee was removing a hose from a power washer and sustained burns to the right hand from the hot water that was in the hose.,1
An employee was using a concrete mixer that was attached to a skid steer and amputated the tip of his right index finger.,0
An employee was transitioning from the B deck of a rail car to the rail car side ladder. The employee lost his grip on the ladder and fell approximately six feet striking his backside on the hood of a parked shuttle pickup truck.,1
"On October 6, 2020, an employee was operating a bagger machine. As the employee was getting a bag, the moving cutter knife amputated the tuft of the employee's right index finger.",0
An employee was unjamming a grinder's airlock. The grinder fingers in the airlock severely lacerated the employee's left hand; the middle finger was medically amputated.,0
An employee was changing out the skid steer bucket when the latch holding the bucket in place became stuck and wouldn't release. The employee used a hammer to release the bucket. The bucket fell approximately 18 inches and landed on the employee's left foot causing multiple fractures.,1
An employee tripped over a fan cord in the laundry room and fell to the floor. The employee sustained a fractured left hip.,1
"An employee was rigging structural steel components for hoisting. When hoisted, one of the sling hooks gave way and the components fell onto the employee and fractured a femur.",1
An employee was working on pipe welds. He was walking between two steel pipes when the pipes began to roll. His foot was caught between the two pipes resulting in a dislocated toe and a broken toe. The employee was hospitalized.,1
An employee became ill from Legionella bacteria suspected to have come from a chiller tower in the workplace.,1
An employee was closing a switchgear in an underground residential distribution primary when an arc flash occurred and caused third degree burns to the employee's hands.,1
An employee was tightening bolts on a flange attached to a pipe. The employee was repositioning the pipe by moving the trunnion back and forth to allow access to the bolts on the flange. The trunnion moved towards the employee and he tried to grab the base plate to try and hold it up. The base plate struck the ground and caught the top of his left hand between the plate and the ground causing fingertip amputations to his left middle and ring fingers.,0
An employee was performing maintenance on a cylinder assembly machine when their right hand was pinned between the equipment gate and the hold down on the machine resulting in multiple hand fractures.,1
An employee was performing maintenance work underneath a recreational vehicle (RV). Pressure released from a hydraulic bottle jack that was elevating the RV off the ground. The RV struck the employee's chest resulting in a fractured collarbone.,1
"While descending from a crane's deck platform at approximately 68 inches in height, the employee lost balance and fell to the ground. The employee sustained two fractured ribs and a shoulder sprain.",1
An employee was applying ice and water shield to roof decking when he stepped on a piece of plastic and fell off the roof approximately 20 feet to the ground. The employee sustained broken bones and internal injuries. Fall protection was not worn at the time.,1
"An employee was turning a cart used for stacking lumber. The cart turned on and the wheel pinched the end of his right ring finger, resulting in amputation of the fingertip. The fingertip was reattached.",0
"An employee had been repairing a cable line from a ladder. The employee was climbing down the ladder when it shifted, causing the employee to fall to the ground. The employee sustained a fractured hip and lacerations to the wrist and head.",1
"An employee stepped out of his truck at a public landfill, heard his knee pop, and fell. The employee sustained a separated left kneecap, requiring hospitalization and surgery.",1
"An employee was using a slag spoon to skim off impurities on molten gray iron. The employee dipped the spoon into the zircon wash and gray iron popped onto the employee. The employee sustained first and second degree burns to the left side of the palm, the forearm, and the abdomen.",1
"An employee was moving 10 sheets (74 lbs. each) of gypsum board on a cart across the east parking area. A  caster wheel on the cart struck a storm drain with a slotted grate, causing a gust of wind to knock the sheets of gypsum onto the employee. The employee was trapped underneath and pinned to the ground. The employee suffered six fractures to his pelvis and was hospitalized for surgery.",1
The injured employee was working on the roof of a private residence installing membrane around a chimney. He was untangling his safety line from a co-worker's safety line when he fell approximately 9 feet to the ground below. The injured employee sustained a punctured lung and a brain bleed.,1
"An employee was watching cable being pulled into a bored passage. He lost his balance, and his right ring finger was caught by a cable being drawn through a machine wheel. The cable pulling block partially amputated the finger.",1
"An employee was trimming a tree that was adjacent to the tree he was tied off to. After completing the trimming, he swung back to the tree he was tied off to and the limb broke causing the employee to fall approximately 20 feet to the ground. The employee was hospitalized with a fractured pelvis.",1
"An employee had been disposing of scrap bar and fell into the well of a receiving dock. The employee sustained fractured ribs, a fractured clavicle, and a punctured lung.",1
An employee fell approximately 16 feet through a plastic skylight panel on the roof and landed on the concrete ground. The employee sustained a fractured right hip and injuries in the right cheek and wrist.,1
"An employee was removing metal roofing panels and fell approximately 10-12 feet through a skylight onto a pallet. The employee sustained a concussion, neck fracture, internal bleeding and a pelvic injury.",1
An employee was cleaning windows and fell from the lower roof level approximately 10 feet resulting in a fractured leg.,1
A maintenance technician was checking a newly installed label machine when the machine turned on and the collar and cylinder pinched and amputated his right ring fingertip.,0
"On October 6, 2020, at approximately 10:45 AM, an employee was cleaning the tailgate on a semi-trailer. While shutting the door, the employee's finger got caught in the barn door hinge. The employee sustained an amputation to the right index finger.",0
"An employee was walking on the deck of a rollback delivery truck. The employee walked around an excavator bucket and fell off the edge of the truck bed, impacting the ground. The employee sustained multiple displaced fractures of the pelvis.",1
"An employee was cleaning/servicing a powder-actuated tool. While the tool was disassembled and the piston was against the palm of his left hand, the trigger was actuated. The tool was loaded with boosters and projected the piston into the employee's left hand/wrist. The employee sustained a punctured left hand.",1
An employee was doing maintenance on a machine. A fingertip on the employee's right hand was caught and amputated.,1
An operations manager was helping another worker unjam a dock plate when his middle fingertip was caught and amputated between the dock plate and a trailer.,0
An employee was lying on the grass on his break and was run over by a pickup truck driven by another employee. The employee sustained scrapes and bruises.,1
"An employee was transferring liquid soap from one storage tote to another storage tote. The hose had pressure built in the line and when the nozzle was turned on to allow for liquid release, the liquid forcefully exited the hose and struck the employee's eyes resulting in chemical burns to both eyes.",1
An employee's right thumb was amputated by a sanding disc while sanding metal.,1
"An employee was tightening battery cable using a wrench. His wrench touched a compressor, causing an arc flash which created a hole in the compressor. Freon was then discharged from the hole in the compressor, resulting in second and third degree burns to the employee's arm, face, and chest.",1
"While passing lumber forms that weighed 100 lbs., an employee tripped and fell approximately 8 feet off the leading edge of a retaining wall onto the concrete pavement. The employee sustained fractures to the T6 and T12 vertebrae with a tension band injury to the T11 vertebra.",1
An employee fell while descending a ladder inside of a scaffold and sustained a head laceration.,1
"On October 7, 2020, an employee was descending an extension ladder from the second floor and fell to the concrete floor below. The employee sustained a fractured pelvis, two fractured wrists and a left orbital cheek fracture. The employee was hospitalized.",1
"An employee was emptying the septic tank on the back of the bus. When the employee went to close the service door, his right hand was caught in the engine's fan belt resulting in amputation of the right ring fingertip.",0
An employee was operating a powered industrial truck when it struck a pallet stop. The employee's left foot was lacerated.,1
"At about 6 p.m. on October 7, 2020, an employee was dismounting a forklift when their elbow struck the forklift's frame. The elbow was injured and began to swell; the employee was hospitalized.",1
"An employee servicing a residential garbage route was hospitalized for heat exhaustion, dehydration, severe muscle cramps, and acute kidney issues.",1
"On October 7, 2020, an employee was working at the gin stand, monitoring the gin process. The employee was trying to dislodge a wad of cotton when the gin amputated the employee's left ring and middle fingers, as well as an injury to the index finger that necessitated a medical amputation.",1
"A contracted employee was brought on site to cap off an HDPE methane gas supply line due to leachate coming through the pipe. Hot leachate (150 degrees F) released from the pipe and struck an employee who was standing 30 feet away. The employee sustained first and second degree burns to the neck, chest, abdomen and arms that required hospitalization.",1
An employee was opening the gate/door to empty a load with the wheel handle beneath a powder blender when he felt pain in his right forearm. The employee was hospitalized for a muscle tear that required surgery.,1
"An employee was cutting conduit with a portable electric saw. The tool bounced and the blade reached the employee's left hand, amputating part of the last joint on the index finger.",0
"An employee inhaled chemicals from a spray duster. The employee lost consciousness and hit her head, resulting in a skull contusion.",1
An employee was unloading a spring-loaded fork on a powered industrial truck (PIT). A dislodged spring partially amputated his right ring fingertip. The employee was hospitalized and required surgery.,1
An employee was sorting through his load to locate cases and organize subsequent stops. He was stacking cases on the ladder platform of the freezer's side door. He placed his hand on a case and stepped to the side ladder. His foot slipped off the top step and he fell to the ground landing on his right hand and breaking his wrist.,1
An employee was removing dough from a machine when the machine blade amputated the upper section of the employee's left middle and ring fingers.,1
An employee fractured a leg while walking into the building.,1
"While repairing a feeder in the hotel pool, chlorine splashed into the employee's right eye.",1
An employee was operating a punch press to produce ceramic parts when their left ring finger was caught between the two dies resulting in a fingertip amputation. The press was not guarded at the time.,0
An employee was climbing a tree when the limb system broke. The employee fell to the ground and sustained three broken ribs.,1
An employee was struck by a subcontractor employee that fell six feet or more from the roof and was knocked to the floor. The employee suffered a dislocated jaw.,1
"On October 7, 2020, a temporary employee was unloading grain from the back of a semi trailer. His fingers were caught in the door while closing the trailer. The middle and ring fingers on the right hand were partially amputated and the employee underwent tendon surgery.",1
"A hospital employee was standing by a door when a patient shut it. The door caught the employee's right index finger, causing the amputation of the fingertip.",0
An employee working on the patent line was routing wire through the guide wheels and onto the pulling block when he brushed up against a hot wire that was in the vicinity. His fingers were then caught between the wire and the guide wheel resulting in amputation of the right middle and ring fingertips.,0
"An employee was removing bolts from the diving door of a submarine using an air-driven impact wrench. When he removed the final bolt, the door swung down, pushing the impact wrench down on his hand. His thumb was pinched between the impact wrench and a support beam under the submarine. The employee sustained an amputation to the left thumb that included bone loss.",0
A piece of steel fell and broke an employee's leg.,1
"An employee accessed the top of a fuel tank and slipped and fell to the ground. The employee was hospitalized with a broken left arm as well as scratches, cuts, and abrasions to the face and head.",1
"An employee was brushing wood off a table saw. The saw amputated the employee's right index, middle, and ring fingers to the first knuckle.",0
An employee was hospitalized after receiving an electrical shock while operating a machine.,1
An employee was operating a Christmas tree baler when their hand was caught in the machine. The employee sustained an amputation of their right ring finger to the first knuckle.,0
"On October 8, 2020, an employee was climbing an inside fixed ladder to reach and close a roof hatch. His foot slipped off a rung and he fell to the floor, suffering fractures to the lower and middle back.",1
"An employee was walking down the steps, slipped, and fell onto his left hip.",1
An employee was loading trash into the back of his truck when he slipped on a trash bag on the ground and fell onto his left hip. The employee sustained a fractured hip requiring surgery.,1
"An employee's hand came into contact with a pinch point on a stepper (a machine that moved wafers during semiconductor manufacturing), and the machine degloved one of the employee's fingers to the knuckle. The finger was later partially amputated.",1
"An employee was using a table saw to rip a door jamb to size. The saw amputated the employee's right middle finger between the first and second knuckles, as well as causing injuries to the thumb and index finger that required stitches.",0
"An employee climbed onto the back of the cones truck in order to secure a ice cooler and fell to the ground, suffering a forehead laceration and a broken finger.",1
"An employee was loading a part into a machine when the clamping mechanism closed on their hand, resulting in amputation of the left index fingertip.",1
"An employee was standing on top of a truck filling a tank-wagon with diesel fuel. The tank exploded, causing the employee to suffer burns and a broken leg.",1
"After unloading processed meats from several walk-in ovens, an employee entered a walk-in cooler. The employee passed out and fell face-first to the floor of the cooler. The employee sustained a dislocated jaw and several teeth were knocked out.",1
"An employee had a reaction to the fumes from cleaning chemicals, fainted, and was hospitalized for asthmatic exacerbation.",1
"An employee was carrying a pot with hot oil and tripped on a grill that was lying on the kitchen floor. Hot oil splashed on the employee resulting in burns to the face, eyes, right leg, and both hands.",1
"An employee was dumping pans of breader. While removing product, the employee's glove was pulled into the chain and sprocket. The employee sustained a partial amputation of the fingertip of the third digit on the left hand.",0
An employee was unloading a pallet from the back of a truck's trailer. When the employee got to the end of the lift gate his foot got caught between the safety bar/pallet stop and the manual pallet jack. He fell off the lift gate approximately 4 feet to the concrete ground. The employee sustained a right knee injury and a shattered fibula.,1
An employee's fingertip was amputated by a hay packaging machine.,1
"An employee was moving equipment and roofing material on a roof. The employee fell from the roof to the ground 29 feet below, suffering three breaks to the left femur, a dislocated right little finger, and broken left wrist.",1
An employee was cutting boxes open with a box cutter. The box cutter sliced off the tip of one of the employee's fingers.,0
"An employee was washing a barn using a pressure washer. Pressurized water struck a divider board, which then fell and struck the employee's arm causing the hand holding the pressure washer hose to angle down. The pressurized water then lacerated the employee's right foot behind the steel toe of his boot. The employee was hospitalized.",1
"An employee was moving a section of a roller conveyor into a truck for unloading. The equipment was pushed and pinched the employee's right middle finger, causing an amputation to the fingertip (with no bone loss).",0
"An employee was checking the hydrolyzer inspection door for obstructions. When the employee opened the door, hot water splashed on his left forearm and upper right chest area. The employee was hospitalized with first and second degree burns.",1
"An employee was assisting in crane operations. Rebar was being loaded when the choker slipped, causing the load to shift and amputated the employee's left thumb.",0
"As a PIT was backing up, it hit an employee, knocked him to the ground, and ran over his foot. The employee was hospitalized with a compound fracture of the foot.",1
"An employee was installing low-voltage electrical wiring and conduit from a scissor lift about 25 feet high. The overhead door was opened from outside and hit the lift, causing the employee to fall 20-25 feet and suffer possible broken bones.",1
"On October 8, 2020, an employee was bringing down a sink from an upper-level shelf using a ladder. He fell from the ladder to the ground about 9 feet below, suffering broken ribs that punctured his lung.",1
"An employee tripped on a curb and fell to the ground, suffering a broken hip.",1
"An employee was installing piping for an electrical cabinet that was set on blocks. As the employee tried to remove the door of the cabinet, the cabinet fell on him, breaking his pelvis as well as causing a lip injury that required stitches.",1
"An employee was stocking shelves with chocolate products. The employee lifted a box weighing 20 to 30 pounds, and while twisting to put it on a shelf, he sustained an injury to organs in his lower right abdomen.",1
An employee's right thumb was caught and amputated by a rotating shaft in a component saw.,1
An employee was standing in front of a slab of quartz that was being moved by a forklift. The slab of quartz fell from the forklift and the employee attempted to stop the slab from falling. The slab struck his hand and amputated four fingers.,0
An employee was visiting a customer's location. While walking up stairs he fell on the stairway and sustained a fractured right ankle/leg. The employee was hospitalized and had surgery.,1
"An employee was providing pest service at a client's home. While the employee was in a shrub, an insect bit him on the upper left leg. He was hospitalized.",1
An employee was walking when his shoe got caught in the carpet and he fell to the floor. The employee was hospitalized with injuries to the head and arm.,1
"An employee was on the third rung from the top of a 6-foot-high ladder, putting a wooden pallet into an open dumpster. The employee fell from the ladder to the ground, suffering a broken right shoulder and a bruised right hip.",1
"The injured employee was operating a sit-down forklift (PIT) with an empty pallet on its forks when the PIT got stuck in the grass and mud while ascending a slight incline in a grassy area in back of the building. A second PIT was used to push the stuck PIT out of a rut to no avail. A third PIT was then connected to the other two PITs with a sling tether and a heavy chain. The two PITs attempted to tow the injured employee’s PIT out of the rut and the jarring motion caused a small rock or piece of mud to strike the injured employee in the back of the head, causing her head to strike the PIT frame. The employee suffered a loss of consciousness, a skull fracture, a subdural hematoma and a head laceration. The employee was hospitalized.",1
An employee was unloading motors when a pallet shifted and a motor fell and amputated the employee's finger.,0
An employee was operating a forklift when it tipped over. The employee was pinned under the forklift and sustained a broken pelvis and a leg injury.,1
"On October 9, 2020, a furnace operator was unjamming a furnace and was overcome by carbon monoxide. The employee was hospitalized.",1
"An employee fell through a skylight while performing roofing overlay, landing on the ground and suffering a concussion.",1
"An employee was troubleshooting a dry ice block-making machine that was not forming ice blocks correctly. The machine engaged and the employee's left hand was pulled inside resulting in amputations to the pinky, ring, and middle fingers on his left hand.",1
"An employee was checking a recompression evaporator when a moving fan blade inside the machine lacerated his left ring and little fingers. The employee underwent surgery, and the little finger was medically amputated.",1
"An employee was operating a tube bender and noticed that one of the pressure dies was misaligned. The employee initiated a manual pause on the bender and then started adjusting the pressure die. A separate pressure die actuated, catching the employee's finger between the pressure die and a tube die causing injury to the distal phalanx of the right middle finger which required medical amputation.",0
An employee was operating a press machine. He was removing a piece of product stuck to the underside of the press when the fingers on his right hand were pinched between two press plates. The middle and ring fingertips were amputated.,0
An operator was examining the stacking section on the folder glue machine and the stop feed mechanism amputated his left middle fingertip.,0
"An employee was levelling a formwork post when a wood beam (4"" x 4"" x 6') fell and hit her head and shoulder. The employee's shoulder was injured.",1
An employee parked the utility truck. The brakes were not set and the vehicle rolled back and pinned the employee between the truck and a metal pipe resulting in a hematoma.,1
An employee was operating a foam profile machine. As the employee attempted to remove a piece of foam from within the profile machine their finger contacted the blade resulting in a partial amputation.,0
"An employee was using a chain hoist to lift an angle hook that had been tack-welded to a metal plate. The weld failed, causing the plate to drop and strike the employee's left hand. Fingers on the left hand were injured and the index finger was partially amputated.",0
"An employee contacted overhead power lines while in a truck basket and suffered electrical burns to the right arm, right side of torso, and right hip.",1
"Employees were finishing one ground termination in a three-phase, 480 volt panel. The ground touched the feeder lug and the panel, which caused a short and an arc flash. One employee was hospitalized with burns to the face, hands, and forearms.",1
An employee was attempting to line up machined holes in a repaired gear box assembly's base plate to bolt it into the gear box cabinet. The gear box assembly was being raised into position and the employee was correcting the alignment when the gear box assembly shifted and caught his right hand between the upper interior cabinet and the gear box assembly resulting in amputation of the ring and middle fingertips.,0
"An employee was cutting a 30 degree bevel on a 2x4 with a circular saw. During his cut, the saw bucked and the employee's hand contacted the saw, resulting in a partial amputation to the right thumb.",0
"An employee was working near the edge of a pier and fell off the pier approximately 20 feet into the water. During the fall, the employee struck a barrier in the water. The employee sustained a fractured pelvis, a fractured right middle finger, fractured ribs, and a punctured lung.",1
"An employee was using a rake to grade hot asphalt in a parking lot. The employee tripped over a car stop and fell onto the hot asphalt, suffering second- and third-degree burns to the lower back and arm. The employee was hospitalized.",1
"While operating a tree cutter, an employee was struck by a 3-inch-thick, 3-foot long tree limb, suffering a laceration to the right side of the neck.",1
"While working in the Rigger Shop, an employee was using channel lock pliers to disconnect two pieces of pipe that were bolted together. The pipe was raised by a crane. When the top bolt was removed, a portion of the pipe was pulled upward, and the other portion fell to floor. The employee's finger was pinched between lower handle of pliers and the portion of pipe supported by the crane. The employee suffered an amputation to his left ring finger.",0
An employee was standing on gate while corralling cattle. A cow struck the gate and the employee fell to the ground. The employee sustained fractured ribs and a fractured tailbone and collarbone.,1
An employee was arranging garbage in a dump truck and fell from the truck to the ground. The employee sustained a broken wrist and elbow.,1
An employee was operating a shirt press when her hand was caught in the machine. The employee was hospitalized for burns to three fingers on her left hand.,1
An employee was clearing debris in a wood grinding machine and amputated her right little finger.,1
"An employee was operating a paver when the mirror of a passing dump truck caught the seat of the paver as it drove by. The seat twisted and pinned the employee against the control panel, resulting in fractures to the ribs and sternum and a dislocated clavicle.",1
An employee was moving tires on a storage rack and fell to the concrete ground. The employee sustained broken ribs and a collapsed lung.,1
"An employee was walking along a rack being towed. The employee tripped over a tow chain and fell to the concrete floor, suffering a fracture to the right arm that required surgery.",1
"An employee was walking toward a deli station in a supermarket. She bumped into another employee and fell to the floor, landing on her side. She suffered a broken hip and was hospitalized, requiring hip surgery.",1
An employee was conducting Census duties on the road and suffered an asthma attack due to smoke in the environment. The employee was hospitalized.,1
An employee was sandblasting at a bridge when the nozzle and blast tip of the line unthreaded. The employee fell backward injuring his back and metallic grit (sandblasting material) caused an abrasion to his arm. The employee was hospitalized.,1
"An employee was moving a 1,000 lbs. 10' x 15' rubber mat using an all-terrain powered industrial truck (PIT). While unrolling and setting the mat into place, the employee's right hand was caught between the mat and the end of the PIT's fork resulting in amputation of the right ring finger.",0
An employee was pushing a cart loaded with countertops when it tipped over on top of the employee resulting in three fractured ribs.,1
An employee was hooking up a trailer and was crushed between a jockey truck and trailer. The employee was hospitalized for crushed ribs.,1
An employee was climbing down a six-foot fiberglass stepladder and missed the bottom step. The employee fell to the floor and fractured his right hip. The employee was hospitalized.,1
An employee was checking trash cans when he was struck by a forklift that was exiting a tractor trailer. The employee sustained a fractured right leg.,1
An employee was in the dish area when the dish washing machine stopped working. He opened the  machine to investigate and the track caught his right middle finger at the mid-point of the nailbed and partially amputated it.,0
A forklift ran over an employee's foot and crushed the employee's toes.,1
"An employee was working on a roof overhang. The employee stepped down from the roof onto a step ladder, which tipped over, causing the employee to fall approximately 10-12 feet to the ground. The employee sustained a fractured back.",1
"An employee had been pulling samples from drums, placing them in jars, and placing them in the lab for testing. He headed to lunch, then returned and began to work in the lab under the lab hood. When he opened a jar, there was a flash fire and chemicals splashed onto him. He suffered burns to the neck, chest, left hand, and wrist and was hospitalized.",1
An employee received an electrical shock after inserting a wire into a molding machine.,1
"On October 11, 2020, an employee was commuting to work on his bike. The employee rode over a speed bump on the company property and fell off his bike, sustaining a rib fracture, a scapula fracture, and a spinal compression fracture.",1
An employee was operating equipment that deposits brownie mix into sheet pans and amputated their right thumb tip.,1
"An employee was hooking up a flatbed trailer to a pickup truck. While letting the hitch down onto the receiver ball, the hitch became bound. The employee jostled the hitch pin while continuing to let the jack stand down. The hitch slipped while the employee's fingertip was in the safety pin hole, causing a fingertip amputation.",0
"On October 11, 2020, the injured employee was directing a passenger vehicle into the service bay. The vehicle pinned the injured employee against a tire machine. The injured employee sustained a fractured lower left leg requiring hospitalization.",1
An employee was transporting a patient on a gurney when she felt a sharp pain in the right side of her back. The employee was hospitalized.,1
An employee experienced back pain after moving boxes.,1
"While loading tubing product, an employee fell from a tractor-trailer and broke his pelvis.",1
An employee fell approximately 20 feet from a mobile scaffold resulting in left leg and lower back injuries.,1
A crew was digging with a rubber-tired backhoe to raise a valve can. The excavation was approximately 3.5 feet deep. Dirt from one side of the excavation collapsed into the hole and pinned the injured employee's leg against the existing utility in the excavation. The employee was hospitalized for a broken leg.,1
"While climbing an external ladder on a rail car, an employee fell to the ground and sustained a broken right femur.",1
An employee was operating a powered pallet jack as part of PIT training when the pallet jack struck a warehouse storage rack. His foot was caught between the pallet jack and the rack. The employee was hospitalized with fractures to two toes.,1
An employee was cutting copper on a shear machine and amputated their left thumb.,0
An employee slipped while descending a scaffold and fell to the ground. The employee sustained a broken rib.,1
While working on the top level of scaffolding an employee tripped and fell through the side guard rails to the concrete ground approximately 18 feet below. The employee was hospitalized with a broken left femur and a cut above the left eye.,1
A delivery driver was organizing his truck for daily deliveries and fell from the liftgate to the ground. The employee suffered a dislocated/fractured elbow.,1
A fluid shipping employee was manually closing an equipment access door and amputated his right ring fingertip.,0
"An employee was moving a box of office supplies from the back seat of his car onto a dolly. While making a twisting motion, he felt something pop in his back and felt a sharp pain and his feet went numb. He was hospitalized.",1
"An employee loaded a part onto the forming machine and activated the machine using the two hand activation buttons. The machine pushed the pipe and the pipe touched the proximity switch which signals the machine to lower the pipe holding parts, but the holding parts did not come down. The employee was adjusting the pipe when the holding parts came down and amputated the index and middle fingers on their left hand.",1
While closing a gate an employee's finger was caught in a roller and amputated.,0
An employee fell while walking to the back utility room and suffered an ankle injury.,1
An employee was riding his bike down a trail and crashed. The employee sustained an arm laceration that required hospitalization.,1
"A prep cook was operating a cooking vessel. The vessel boiled over and hot gravy splashed onto the employee. He suffered second-degree burns on his head, face, arms, hands, and torso.",1
"While delivering vending machine products to a worksite, an employee's foot got caught in a dolly-cart that was leaning up against the inside of the box-truck. While attempting to get his foot unstuck the employee lost balance and fell, striking his ribs and spleen on the back opening-lip of the box-truck. He sustained three fractured ribs and a bruised spleen.",1
"An employee was removing tape from the bench welder when his hand was caught in the bench welder. The employee received finger fractures and lacerations, as well as a possible fingertip amputation.",0
"An employee on the deck of a marine vessel was attempting to free a jammed mooring line by manually pulling on it. The line popped free, causing the employee to fall backward onto the deck. The employee sustained a broken left femur.",1
A team member was unhooking the asphalt oil supply line from a tanker truck when hot asphalt oil sprayed onto his hands and arms causing burns that required hospitalization.,1
An employee was operating a stand-up powered industrial truck (PIT) when her vehicle was struck by another PIT. The small toe on the employee's left foot was amputated.,0
"While descending a 10-foot step ladder an employee slipped and fell, sustaining two broken bones in the lower leg.",1
"An employee was setting up lane closures. A car driver crossed over four lanes and hit the arrow board (already set up) and the company pickup truck. The truck in turn hit the employee, who suffered a broken left femur, chipped bones in the shoulders, a broken right ankle, and three broken ribs. The employee was hospitalized.",1
"An employee was transferring water from the frac tank/settling tank to another tank. The transfer continued until sludge built up in the pipe. The employee then had to clear the sludge from the pipe. The employee blew the line out using nitrogen, at 40 to 50-pounds, then heard a leak coming from a cam-lock connection. The employee was securing the broken cam-lock mechanism when a plug shot out of the pipe and broke the employee's finger. The employee was hospitalized for surgery.",1
"An employee was running a line moling machine to clean the inside of pipe. When the employee went to pressure up the system using a 20-k water line, water from the hose injected into the pinky finger on his left hand.",1
A service technician was performing maintenance on a forklift when his fingers got caught in the carriage chains resulting in partial amputations to digits 4 and 5 on the right hand.,0
An employee was cleaning a plate on the press and amputated fingertips.,1
An employee was setting up slitter knives to be sharpened on a knife grinder when their right middle finger was crushed between a level used to align the grinding wheel and the grinding wheel guard. The employee sustained amputation of their right middle finger between the first and second knuckle.,0
"At 11:30 a.m. on October 12, 2020, an employee suffered a broken femur while stepping off a pile of mattresses. He was hospitalized.",1
"An employee went outside of an office building while other employees where fuming a honeycomb. The employee was stung in the head by a bee, went into cardiac arrest, and was hospitalized.",1
"An employee was on a buggy in a driveway, moving trailers to storage and was struck by a semi-truck. The employee sustained contusions to the right side of the body requiring hospitalization.",1
An employee was using a rag to wipe pieces of paper from the press rollers. The rag got pulled into the rollers and pulled the employee's arm into the nip point. Their right arm was degloved from the elbow down.,1
"A temporary employee was working on equipment with a conveyor belt when he got caught in the equipment. The employee sustained injuries to the right calf, foot, and ankle.",1
An employee tripped and fell while going down stairs. The employee was injured and required surgery.,1
"While walking through a warehouse facility that was being renovated, an employee fell through a floor hole where a grate had recently been removed. The employee sustained broken ribs and a punctured lung.",1
"An employee was placing a steel plate back into a rack using a 10-ton overhead crane and a plate clamp. The plate fell, hitting the employee's left foot and amputating the big toe as well as part of the second toe.",0
"An employee was using a 4-inch angle router to remove residual weld from a tooling-removal area on an aluminum ring. The angle router kicked and its blade came into contact with a finger on the employee's left hand, causing an open fracture.",1
An employee was leaning into an office to speak to another employee when the office door shut and pinched his left middle finger between the door and the door frame resulting in an amputation with bone loss.,0
An employee was struck by a forklift resulting in broken bones in their right foot.,1
"An employee slipped on water in a parking lot and fell, suffering a knee injury. The employee was hospitalized.",1
"An employee was attempting to replace a wear pad on a crusher. A come-along, being used to hold an access gate open, came loose and dropped the gate onto the employee. The employee suffered a chipped and/or broken vertebra.",1
"On October 13, 2020, an employee was riding on the tailgate of a pickup truck. The truck went over a bump and the employee fell striking his head on the concrete parking lot. The employee suffered a skull fracture and bleeding in the brain.",1
"An employee had been media blasting for about an hour. Due to a clog, the employee lost control of the blasting nozzle. The employee's left hand slid in front of the blasting nozzle and the garnet sand used for media blasting went into the employee's hand. The employee was hospitalized and their left thumb required a skin graft.",1
An employee's left ring finger was caught in the snake machine and fractured while unclogging a pipe.,1
"An employee was walking up stairs. The employee's heel caught on a step and they fell backwards down the stairs, suffering lacerations to the left hand and right knee that required sutures.",1
An employee was landscaping around the entrance of the park when he was struck by a vehicle. The employee was hospitalized with a broken left leg and bleeding in the brain.,1
"While working in a block house where concrete blocks were being manufactured, employees became lightheaded due to potential carbon monoxide exposure. One of them was hospitalized for high carboxyhemoglobin level resulting in headache and mild delirium.",1
An employee was operating a machine press to fabricate a piece of metal and amputated their right index fingertip.,0
An employee was cleaning a hydraulic conveyor roller while a large steel pipe was on the conveyor. The employee's right hand was caught between the conveyor roller and the pipe resulting in amputation of the employee's thumb and lacerations to the index finger and palm. The employee was hospitalized.,0
"While performing maintenance on equipment, an employee's right pinky finger was caught between a belt and pulley resulting in a fingertip amputation.",0
"An employee was preparing to conduct welding on a row of U-shaped piping. He was walking on a plank board placed in the saddle of the ""U"" when the board flipped. He fell about 10 feet to the ground below, suffering fractures to the back and neck.",1
"An employee carried a 50-60 lbs. roll of broadcasting cable around a truck to the point of deployment. He placed the cable on the ground and prepared to deploy it. When he stood up, he experienced pain in his abdomen. The employee sustained a laceration to his spleen.",1
An employee was steaming the inside of a production tank when a flash fire occurred inside the tank. The employee suffered second-degree burns to the face and third-degree burns to the hands.,1
An employee was picking marijuana buds and placing them on a tray when he suffered a severe asthma attack. The employee was hospitalized.,1
An employee had just clocked out and was walking to his car in the parking lot when he was shot by an individual who had been waiting for him in the parking lot. The employee was hospitalized.,1
"After looking into a box of mail, an employee lost her balance and fell, landing mainly on her right wrist.",1
An employee was on a roof to attach the roof ladder to the peak of the roof. The ladder slipped while he was trying to attach it to the roof. The employee lost balance and fell approximately 15 feet to the ground below suffering injury to his right side and shoulder area and damage to his mouth and teeth.,1
An employee was feeding scrap into a shredder and caught his left arm in the conveyor. The employee was hospitalized for injuries to his left bicep and forearm.,1
An employee was in an attic service space to perform maintenance when they bumped their head on an I-beam and fell back. The employee sustained a back sprain and a laceration to the forehead.,1
"On 10/13/2020, at approximately 12:25 AM, an employee was walking past a moving conveyor belt when his left middle finger was caught by the conveyor. The employee sustained an amputation to the left middle finger.",0
An employee was cleaning the area and amputated their right index fingertip while moving a circular saw.,1
"An employee was clearing brush, tripped on TV cable that was lying on the ground, and fell onto the concrete ground. The employee suffered an injury to his knee cap that required surgery and hospitalization.",1
"An employee fell from a 20' high flat roof, sustaining injuries to the left leg.",1
"An employee was standing in front of a set of towed aircraft stairs, guiding a tow car back. The tow car backed into the employee, and his left leg was caught against the tow stairs hitch. He suffered broken bones and a damaged artery in the leg.",1
An employee was working near other contractors on site who were using ladders and tools. He was maneuvering around a ladder and a box of tools when his ankle got caught on the box and he tripped and fell onto his elbow. The elbow was fractured.,1
An employee was approaching an excavator and was caught between the swinging tail of the excavator and a tree. The employee's arm was crushed and had to be amputated.,0
"A day care employee tripped over a crawling baby while holding another baby. The employee suffered a broken left leg and was hospitalized, undergoing surgery.",1
An employee was changing the tip on a pressure washer when water was injected into their right hand.,1
"An employee was clearing a clog in a paper shredding vacuum. The shredding blade moved and cut the employee's right middle finger, causing a partial amputation.",1
"An employee was standing in front of a forklift carrying several 2,000-pound ""logs"" of aluminum. The logs were banded together; when the employee cut the banding so they could be unloaded, one of them rolled onto the employee's foot. The employee's steel safety toe collapsed, and the employee's toes and metatarsals were crushed. Part of the foot was medically amputated.",1
"An employee was operating the snubbing unit snubbing a pipe out of the hole and laying down pipe using a single latch elevator on the driller side rig winch. The elevator got hung up on the tubing board above and the latch on the elevator opened allowing the pipe joint to come free, fall, and strike the employee in the forehead. The employee was hospitalized.",1
"An employee was inspecting and cleaning a probe on a newly installed power distribution transformer, after ensuring that the fuses were disconnected. The employee's left index finger touched powered equipment and the employee was shocked.",1
"An employee was drilling holes in a piece of tube steel. As he was repositioning the material, it shifted, trapping his finger against the drill bit. The drill bit caused a laceration requiring hospitalization and tendon surgery.",1
An employee was struck by a reversing skid steer. The employee sustained a fractured left foot that required hospitalization and surgery.,1
"An employee was robbed while delivering pizza. He tripped and fell while running away, and his face was injured where it struck the ground.",1
"On September 14, 2020, an employee was climbing a fixed ladder to repair a roof. When he was four or five rungs up, he lost his grip and fell to the concrete floor below. He suffered a broken right leg.",1
While removing a temporary cover from an electrical panel an employee was burned on their right arm and face by an arc flash.,1
"An employee was stocking product on shelves from a two-step stepladder. The employee fell, suffering a broken left arm.",1
"An employee was moving a piece of copper alloy pipe he had just cut and cleaned. When the employee placed the pipe section on a stationary conveyor it bounced up and pinched his left ring finger against the frame, amputating the finger.",0
An employee was removing a light fixture from a conduit. He was using a fixture clamp vise and ratchet set. The fixture shifted and amputated a quarter-inch of his left index fingertip.,0
"An officer was conducting border watch operations in a train yard area. While walking down a creek, he fell and hit his head on a tree trunk. He sustained a cut to the head and a potential concussion.",1
An employee was connecting a load to a crane when his left ring finger was crushed by the load chain resulting in medical amputation.,0
An employee was sliding a potential transformer on a trailer. The tip of his little finger was pinched between the transformer and another one next to it. The fingertip was amputated.,0
"On October 14, 2020, an employee was installing ductwork from the third rung of an A-frame ladder. He fell to the floor 4 feet 9 inches below, landing on his back and suffering a cracked vertebra in his back. He was hospitalized.",1
"While standing up from his desk, an employee fell to the tile floor and injured a hip.",1
An employee was coupling rail cars when an unknown object struck his left foot penetrating his leather boot and causing a laceration/puncture injury to his left foot.,1
"An employee was working from a scissor lift, programming transmitters for the drive motor of an overhead door. The remote transmitter in his sweatshirt pocket activated the motor. His left index finger was caught in the exposed chains and sprockets, and was amputated at the distal joint.",0
"Two employees were moving material that was loaded on a material cart that weighed 3,500-4,000 lbs. The material cart was on an electric pallet jack. The injured employee tried to help stop the pallet jack and was caught between the material cart and a support beam, sustaining a ruptured spleen.",1
An employee was exposed to a propane gas leak and was hospitalized for elevated carbon monoxide levels.,1
An employee was operating a chip spreader machine down a hill. The spreader began to skid when he applied the brake. The wheels locked and the spreader continued to slide down the hill. The spreader impacted a ditch and spun 180 degrees. The operator was thrown off the machine and landed on the bank of the ditch causing injury to his lower back.,1
"An employee was on a flatbed trailer, choking a rigging sling to a concrete cylinder when he fell backward off the trailer approximately 53 inches onto compacted soil and sustained a broken right hip.",1
"An employee was on top of a block wall, cleaning off debris. He fell off the wall to the ground (concrete and hard-packed earth) below, breaking both feet and his right fibula.",1
"An employee fell while working in a trench, striking his head on a pipe. He suffered head injuries and was hospitalized.",1
An employee was adding bags of minerals to a mixer. His fingers were caught in the rotating mixer blades while sweeping residual material into the opening resulting in amputation of the right index and middle fingertips. The machine was not guarded at the time.,0
"An employee experienced an allergic reaction to latex gloves sold in the store, resulting in hospitalization.",1
An employee changed the battery of a forklift and dropped the battery on her foot. The employee was hospitalized for injury to the left foot/toes.,1
An employee had been stretching out a cargo net. He tripped on a pallet tie-down and fell resulting in a head injury.,1
A toolmaker was setting a pin in a die set using a hand-operated press with an overhead pull-down bar when the die set slipped. This released the resistance against the downward force causing the toolmaker to fall backward against a storage rack and then to the floor. The toolmaker suffered a head injury.,1
"An employee was attempting to realign a floor plate in the metal transfer run when a coil of brass product fell off the buggy, pinning the employee's lower leg. The employee sustained a fractured  lower leg and wrist and a laceration on the back of the lower leg.",1
"An employee was using a circular saw to cut wood frame boxes, concrete forms, and 2x4 boards. The saw slipped while cutting the 2x4 and amputated the employee's left index, middle, and ring fingertips.",0
"The injured employee was working on a slip repair. He was standing on a sloped surface to spot for the articulating dump truck. A dozer was pushing dirt above and away from where the employee was spotting. A large dirt clod rolled from the dozer and struck the injured employee who slid down the sloped area approximately 15 feet and then fell over a benching of the hill that dropped approximately 5 feet onto the ground below. The employee suffered a fractured collarbone, hip, and pelvis and was hospitalized.",1
An employee was connecting the tower to the spike when his finger was caught between the two. The employee's right index finger was amputated at the first knuckle.,0
"Crew members where unbolting a 40-foot riser pipe in order to separate the pipe in two pieces. When the bolts where removed, the pipes fell apart. The cable used to secure the bottom pipe caught an employee's left hand and pinched it between the pipe and the cable. causing a laceration to the middle finger and injury to the index finger. The employee was hospitalized.",1
"An employee was repairing a nitrogen line. Pressure in the line caused a fitting to come off the line and strike the employee, causing abdominal injuries and broken ribs. The employee was hospitalized.",1
An employee was performing maintenance on a walkway above a tank that contained hot water (212 degrees). Rising steam caused second degree burns to the employee's leg.,1
"An employee was attempting to clear a jam in the stacker/sorter. The machine activated, causing the stack of pallets to rise and amputate the employee's right thumb. The machine was not locked out at the time.",0
An employee was removing a jack stand from a fertilizer spreader that is pulled by a tractor. The jack stand fell onto his left thumb crushing it between the jack stand and the fertilizer spreader. The thumb was fractured.,1
"On October 15, 2020, at approximately 7:30 a.m., a field service technician had just loaded a drive unit into a van using a forklift. The employee exited the forklift to straighten the unit in the van. The forklift rolled forward and pinned the employee between the bumper of the van and the carriage of the forklift. The employee was hospitalized for broken bones in the right leg.",1
"An employee was caught under partitions when they let go of the tie that was holding the partitions together. The employee was hospitalized with broken ribs, cracks to his spine, a punctured lung, and a minor neck injury.",1
An employee was cutting a 2x4 on a table saw and amputated the tip of their right thumb.,0
An employee was cleaning out trash from a conveyor line. The conveyor's chain caught the employee's left hand and amputated the middle and ring fingers.,1
An employee was adjusting a log on a conveyor when their leg was caught in the conveyor chain and amputated.,0
An employee was clearing a jam in the half pint machine and amputated their left middle fingertip when it contacted the conveyor chain.,0
"A service technician was on a ladder repairing an aerial telephone cable at a customer's home. While descending the ladder, the technician fell approximately 5 feet to the ground and broke his left wrist.",1
An employee was working on a manufacturing line when his right arm was caught in the stacker machine and broken.,1
"While walking to the lobby, an employee slipped and fell on a wet tile floor. The employee was hospitalized with a fractured kneecap.",1
The injured employee and a co-worker had just finished removing a cover from a roll of carpet when the injured employee's right foot and ankle were run over by a forklift. The employee's foot was fractured.,1
An employee fell from the cage of a forklift while cutting branches. The employee landed on the ground and fractured his right ankle.,1
An employee was working on a highway project when a track-hoe backed into a barrier causing the barrier to strike the employee's foot. The employee sustained fractured toes.,1
Employees were placing stumps in the back of a truck. The injured employee was in the back of the truck guiding the loader when the loader closed its clamps to exit the back of the truck and pinched the employee's left foot in the clamps. The employee sustained injury to a toe on the left foot.,1
"An employee tripped on a raised curb near a building entrance. The employee fell across the sidewalk, striking their head on the base of a concrete pillar.",1
"An employee was wiping a moving roller with a rag when the employee's left hand was pulled into the machine, resulting in amputation of their middle and index fingers.",0
An employee was working on the webbing machine when their thumb was caught by the polyester webbing and was amputated.,1
An employee was monitoring an electrode insulation process. The employee inhaled vapors from the coating tank and developed respiratory irritation and blurred vision. The employee was hospitalized.,1
An employee was cutting a 1x4 piece of wood using a miter saw when the saw lacerated his left middle finger and amputated his left ring fingertip.,0
An employee was using a press machine to press the metal bars. While he was putting a new bar in the press was activated and the machine caught his right index finger and caused an amputation.,0
An employee cut into an electrical conduit wire while he was removing asbestos insulation from a demolition site. The employee was hospitalized for electrical burns.,1
An employee opened the gate to a cattle pen. The employee was knocked to the ground and stomped on several times by a cow. The employee was hospitalized with internal injuries.,1
"An excavator bucket was being put on an excavator. When the excavator's arm moved, the bucket fell off and struck an employee. The employee's leg was broken in two places.",1
"An employee was entering a restroom. The employee's foot got stuck and they fell to the floor, suffering two broken arms.",1
"An employee had been finishing concrete while wearing gloves and a long sleeve shirt. The employee left work at 2:00 PM on 10/16/2020. The employee went to the hospital at 5:00 PM, having sustained contact dermatitis on the hands, arms, and back of the neck due to exposure to concrete.",1
"An employee was hauling cotton seed and arrived on-site for a load. When one of the bins would not drop cotton seed, the employee opened the back gate to the trailer and stood on the cotton seed to poke the seed. The cotton seed fell, engulfing the employee. The employee was hospitalized.",1
An employee was removing a plow blade from a plow frame when the blade fell forward and struck the employee's left shin. The blade slid down the employee's left leg as the employee fell backward. The employee sustained a fractured left femur.,1
"An employee was dragging a bucket filled with hot oil. The oil splashed onto the employee's boots, burning the employee's feet and ankles.",1
An employee was standing in a trench at a depth of 3 feet when the side of the trench collapsed. The employee sustained a fractured pelvis.,1
"While walking into work, an employee stepped into a mulched area that was lower than the lip of the concrete sidewalk. The employee tripped on the lip of the sidewalk and fell, sustaining a broken pelvis.",1
"On October 16, 2020, an employee was operating a joiner machine to flatten and straighten a board when his hand contacted the blade resulting in amputation of two fingers.",1
A temporary employee was replacing a printer plate on a jumbo press machine when the machine crushed his left hand. He was hospitalized.,1
"An employee was walking on top of a piece of cargo when the employee stepped through a section of plastic sheeting covering the cargo. The employee fell approximately 14 feet to the steel deck of the ship's hold and fractured their left shoulder, left ankle, and left wrist.",1
"An employee was putting money into a safe. While closing the door, the locking mechanism amputated her thumb tip.",1
"After talking to a customer, an employee turned to walk away, tripped and fell to the ground, sustaining a fractured left hip.",1
An employee had dropped off concrete at a residence and was cleaning out the barrel of the truck using a water hose. The hose got caught on the rotating barrel and the nozzle caught the employee's hand causing a fingertip amputation.,0
"An employee was unfolding a fold-up staircase attached to a mobile toilet facility. The stairway hinge caught a finger on his left hand, amputating it above the knuckle.",1
An employee received multiple yellow jacket stings after leaving the crawl space of a customer's home and suffered an allergic reaction.,1
"On October 16, 2020, an employee was walking towards the kitchen at a customer's house when she fell and struck her head. The employee suffered a concussion and lost teeth. The employee was hospitalized.",1
"An employee was hooking up two 28-foot freight trailers. His left hand was caught between a trailer and the converter gear, and he suffered lacerations and a broken middle finger.",1
An employee was operating a forklift and was attempting to push the button to open a garage door. The employee's ring finger was caught between the forklift and a pole resulting in amputation of the fingertip.,0
"An employee was performing maintenance on a drum at an asphalt plant. The drum was activated while the employee was turning by hand, causing the employee's fingers to be caught in a V-belt pulley. Two of the employee's fingers were amputated.",1
"An employee was trying to fix a feeding issue on a wrapper machine. The feeding mechanism pinched the employee's right middle finger, amputating the fingertip.",0
"An employee was on the ground removing a caster from a material handling cart. The 60-pound caster fell from the employee's hands. As the employee attempted to catch it, the caster struck their left hand causing multiple fractures.",1
"An employee was working on an extension ladder, installing or repairing wiring, and fell to the ground sustaining a broken right leg.",1
An employee was working on overhead lines when he felt numbness in both forearms while making a connection.,1
A skid steer was grading rock along a curb for a parking lot. An employee was shoveling the rock along the curb to uncover the curb. The employee lost his balance while shoveling the rock and stepped behind the skid steer while it was backing up. The skid steer ran over the employee's right leg causing a compound fracture to the shin.,1
An employee fell off a ladder while spraying ceilings with paint. The employee suffered a broken left arm.,1
"An employee was getting supplies from a closet. He fell over a cart, landing on the floor and suffering a shoulder injury that required surgery.",1
"An employee was performing maintenance on a yarn twister machine. When the employee started up the machine, it caught and amputated the employee's left little finger.",1
An employee was escorting a customer to their car in the parking lot and was struck by a car as it was backing out of a space.,1
"While pushing a cart of meat trays, an employee slipped on the floor and fell on his left hand resulting in a left wrist sprain and dislocation of two fingers on the left hand.",1
An employee was making an adjustment to the bagger machine. His right thumb got caught between the chain and the sprocket and was partially amputated. The machine was running at the time.,0
"An employee was walking at the jobsite, tripped, and fell onto plywood and metal framing resulting in a laceration to the left forearm.",1
An employee was operating a piece of asphalt milling equipment on a highway. The mill struck a vehicle in a live lane of traffic and the employee suffered whiplash and contusions.,1
"Employee was assisting the platform manager to move a drum of oil with a dolly. While setting the dolly down, he smashed the tip of his finger between the handle of the dolly and a beam on the platform. This resulted in the amputation of his right middle fingertip.",0
An employee was clearing a choked machine when he contacted rotating parts in the machine. The employee sustained a partial amputation of two fingers on the right hand.,1
An employee was checking the gap between the feed rollers when his right hand was caught in the rollers. Multiple fingers on the right hand were amputated.,0
An employee was cleaning the tracks on a machine when a chunk of concrete rolled off a hill and struck him. The employee sustained broken ribs and a broken hip.,1
An employee reached down to brush debris from the outrigger of a bucket truck. The outrigger retracted and amputated the employee's fingers.,0
An employee was walking and tripped over a clothing bin causing her knee to pop.,1
"On October 19, 2020, a carpenter was ripping a piece of 2 x 4 lumber with a circular saw when the saw kicked back and amputated the employee's left pinky and ring fingers.",1
A road was being prepared for new asphalt. Another contractor was milling down existing asphalt and then running a sweeper machine to push the loose asphalt to the middle of the road so it could be picked up. An employee was inspecting the work by measuring the depth of the milling operation when the street sweeper backed up and struck him. The employee sustained injuries to the pelvic area.,1
"An employee was using a battery-powered circular saw to cut a piece of high-density plastic to make a ceiling tile. The saw would not start after the battery was replaced. The employee tried two different batteries. While adjusting the trigger, the saw started and the blade contacted the employee's left middle finger, amputating it from the cuticle to the tip.",0
"An employee was working on an industrial lathe when the tail stock on a 17,000-pound reel spool broke and the spool dropped onto his leg, crushing it. The employee was hospitalized.",1
"On October 19, 2020, an employee was cleaning kitchen pots. While emptying a vat, the handle dislodged and boiling water spilled onto the employee and the floor. The employee then tripped over a drain lip and fell onto his back in the hot water that had spilled on the floor. The employee was hospitalized for second degree burns to his legs and hands.",1
An employee was using a pedestal grinder to put an edge on the wedge of a pry bar. The part was pulled into the grinder and the employee's left pinky finger contacted the grinder wheel resulting in a partial amputation.,0
An employee was moving a stuck pallet off a powered rider jack when he was caught between the rider jack and the pallet. The employee sustained broken bones in the right leg.,1
"An employee was working on the empty tote conveyor. As he was putting a chain onto a sprocket, a box passed through a photo eye, triggering the conveyor.  The employee was caught by the sprocket and chain, sustaining the amputation of 1/8"" of the left ring fingertip.",0
An employee was operating a lathe when the mandrel struck the employee's arm and broke it.,1
An employee was operating a powered industrial truck (PIT) and struck the racking. His left foot was crushed between the PIT and the racking.,1
An employee was cleaning an apartment that was under construction and stepped on a 1/2 inch nail. The employee's right foot was amputated.,1
"While operating an industrial vacuum, an employee's arm was sucked into the vacuum's hose. The employee sustained a circulatory injury to his right arm. He was hospitalized with arm swelling and underwent surgery.",1
An employee was operating a brake machine and fractured four fingers on the right hand and their left thumb.,1
An employee was walking in the area filling drink orders and tripped over a loose floor tile. The employee fell and broke their right leg.,1
"An employee was helping unload boxes from a box truck. The employee climbed onto the lift gate to grab a box then slipped and fell 3 to 4 feet to the pavement, hitting their head. It was raining at the time. The employee sustained lacerations and a fracture to the back of the skull, swelling of the brain, and a possible concussion.",1
"An employee was walking down a set of steps on the grading line. A leg from a pallet rack was blocking their path and when the employee tried to step over the obstacle, he missed the next step and fell forward onto the floor. The employee sustained a broken left leg.",1
An employee was replacing a clean privacy curtain in an isolation room and fell approximately seven feet off an A-frame ladder onto the floor. The employee suffered head trauma.,1
An employee was operating a saw to cut a 2x4 and amputated half of his thumb. The saw was not guarded at the time.,0
"An employee was cleaning a grain barge. While climbing the ladder from the barge to the dock, the employee lost their footing and fell approximately 10 feet to the ground. The employee suffered a fractured lower right leg near the ankle.",1
"An employee was inside a chute, cleaning dust, when he slipped and cut his right elbow on an object inside chute.",1
Two employees were inspecting the hoist cable on an overhead crane. One employee was operating the crane while the injured employee inspected the hoist cable. The injured employee was feeling the cable while it was moving through his gloved right hand checking for burrs or distortion in the cable when his fingers were caught between the crane cable and the pully of the block. Two fingertips were amputated.,0
"An employee was operating a concrete transport vehicle in the company yard. While making a turn, the wet cement shifted causing the vehicle to overturn. The employee was hospitalized with a broken left ankle.",1
"An employee was on an A-frame ladder marking locations for brackets to hold plumbing pipes in the ceiling and wall. The employee was about 8 feet high on the 12-foot ladder when he lost his balance while reaching to mark a location for a bracket and fell from the ladder onto the floor. The employee injured his face, eyes, shoulders and sustained a broken right femur.",1
An employee was reaching for a sliding nail gun and fell 30 feet off a roof onto the ground. The employee suffered broken bones.,1
An employee was attempting to unclog a pipe in the taco department line between the holding tank and the mixer when their right index finger contacted the ball valve and the pneumatic actuator cycled causing amputation of the finger between the first and second joint.,0
"A conveyor belt on the green bean line was slipping due to some icing on the drive motor. An employee went over to start it manually. While tugging on the belt, the employee's hand got pulled into the underside of the conveyor. The employee sustained third degree burns on his left arm and hand requiring skin grafts.",1
An employee was cleaning a pot sticker machine when the blade amputated a fingertip.,1
"An employee was trying to bolt up approximately 15 feet of pipe to a spool piece coming out of the pump intake. As he was trying to insert a gasket, the spool piece dropped on his hand and amputated part of his pinky finger.",0
An employee was lifting boxes weighing approximately 36 pounds and felt pain in his stomach. He was hospitalized with a hernia.,1
An employee's left hand and forearm got caught in the roller section of the concrete mixer truck causing severe damage that required hospitalization.,1
An employee fell and injured her knee while delivering an order to a customer's car in the mall parking lot.,1
"An employee was pushing a cart across the parking lot when the cart became entangled in weeds. The employee tripped and fell, striking his head. He temporarily lost consciousness.",1
An employee was using a forklift to pull a customer's order. The employee fell from the forklift onto the concrete floor.,1
An employee had been stripping foundation form work. The employee was in the break area when he got up to get a drink of water and collapsed due to a heart attack.,1
"An employee was assaulted by a customer during an argument. The employee sustained a broken finger, a cut, and bruises.",1
An employee fell while descending a ladder and broke his leg.,1
An employee was replacing the drive belt on a 40-inch exhaust fan. A finger was caught between the belt and pulley resulting in a fingertip amputation.,0
"An employee placed a new bundle of metal tubing on a work bench. While the employee was removing the last steel strap, the bundle shifted and his finger was crushed between the tubes and the bench. The employee's left ring finger was amputated.",1
An employee was guiding a hoist to pick up a connex box. The twist lock came off the shipping container and struck the employee in the head causing a broken nose. The employee was hospitalized.,1
An employee was clearing a jam on the conveyor belt leading to the chipper when a stump kicked back and jammed his right ring finger resulting in a compound fracture and secondary partial amputation.,0
Employees had shut down and locked out a cotton gin lint cleaner to clean it. An employee entered the lint cleaner and his glove was caught by the teeth of the cleaner. His glove was pulled off and the employee sustained a de-gloving injury to the top of the right hand.,1
"On October 20, 2020, at approximately 11:45 PM, an employee was kicked in the chest while trying to restrain a combative patient. The employee developed dizziness, chest pain, and shortness of breath and was hospitalized.",1
"A bridge beam had been rigged to a forklift. The rigging slipped from the forklift and the beam struck an employee's foot, amputating four toes.",0
An employee had dumped a 2-yard dumpster. He then used the control box to wind the winch cable. The winch cable was wrapped around the employee's left hand and also became caught on something on the side of the truck. The employee pulled his gloved hand out of the winch cable and sustained a laceration to his left middle fingertip. The injury required surgery and involved loss of bone.,0
"An employee was readjusting the straps on an eight foot high electrical switchboard that was resting on the liftgate of a delivery van when it fell onto the employee. The employee suffered broken ribs, and a broken left hip and right arm.",1
"An employee was operating a welding machine when it was jammed by a piece of material. The employee cleared the jam and started the machine. The material jammed the machine again. The employee walked behind the machine and proceeded to clear the jam. Soon after, the machine continued to cycle. A set of material clamps came down and a material pusher came forward. The employee was then caught in the machinery and both of his hands were amputated.",0
An employee was unjamming a seamer machine and lacerated her right index finger.,1
"An employee was assisting with de-escalating a student. When it was time to restrain the student, the employee fell, struck her head, and suffered a seizure.",1
"On October 20, 2020, at approximately 1:15 PM, an employee was moving a 24-foot long beam with a co-worker. The employee fell backward through an open roof hatch approximately 17 feet to the floor below. The employee was hospitalized for a skull fracture.",1
An employee sustained an amputation to the index fingertip on their left hand while cleaning a rubber kneading machine. The machine was running at the time.,1
A kitchen manager was slicing vegetables with a knife and lacerated the tip of his left middle finger resulting in amputation of the fingertip near the nail area without bone loss.,0
"On October 20, 2020, a maintenance employee was cleaning a machine pit. The employee was lifting a wooden box and it slipped out of his hands. When he tried to grab the wooden box, he pinched his left middle finger between the wooden box and a metal corner on the machine resulting in amputation of his left middle fingertip.",0
An employee was clearing a blockage on a piece of equipment when the slide gate closed on his hand and amputated the left index fingertip.,0
"An employee was using a ladder to climb down from the roof. The employee slipped from the rungs of the ladder and fell onto cinder blocks and the ground. The employee fractured bones in their ankle, foot and heel.",1
An employee was on a forklift platform stocking material on a rack and fell approximately six feet and struck his head. The employee was hospitalized.,1
"An employee was cleaning a fryer when a bucket was tipped over, spilling a foaming alkaline caustic cleaner that burned the employee.",1
"On 10/20/2020 at approximately 7:30 AM, an employee was clearing scrap from a saw when their left ring finger contacted the blade. The finger was amputated below the first knuckle.",1
"On October 20, 2020, at approximately 7:35PM, an employee was placing boxes of bleach onto a conveyor system. The bottom of a box broke causing bottles of bleach to fall out. One bottle struck the conveyor and broke open splashing bleach into the employee's face. The employee was hospitalized for treatment.",1
An employee was operating the downspout gutter machine and amputated a fingertip.,0
"An employee was trying to roll a crossed iron pipe back into the fixed metal pipe saddle. He lost his balance and as he tried to catch himself, his index finger was caught between the pipe and the pipe saddle crushing it. The fingertip was surgically amputated at the first knuckle. His middle and ring fingers sustained contusions.",1
"An employee was operating a milling machine when his hand was caught in the machine, resulting in the amputation of the employee's right hand.",1
An employee was using a scraper or a hand-grinder to clean weld splatter on a stanchion from a towable gate. A steel part fell and broke the employee's lower left leg.,1
An employee was using a cart to move welding pipe weighing about 900 pounds. The cart tipped over and the pipe struck him in the left leg. He suffered a contusion to the upper thigh and was hospitalized due to concern about blood clots.,1
"An employee was waxing the floors, slipped, and fell onto their back. The employee was hospitalized for a collapsed lung.",1
"An employee was dismantling a battery pack after destructive testing. A tool contacted the battery core and it shorted causing burns to the employee's thigh, calf, and ankle.",1
An employee was walking across the road and was struck by a forklift resulting in a compound fracture to the left leg.,1
An employee was involved in bushing removal using an impact tool when a metal shard flew off of the impact tool and punctured the employee's abdomen.,1
An employee was descending a fixed ladder when it came loose from the wall causing the employee to fall to the ground and fracture a foot.,1
An employee was feeding paper into a paper core machine when their finger got caught on a belt. The employee sustained a fingertip amputation.,0
An employee was on a 15-foot ladder to remove a rain gutter pipe. He missed a rung as he descended the ladder and fell backward. The employee was hospitalized with a fractured neck.,1
A pack of re-run railroad ties were placed on a vertical re-saw roll case to be re-sawn. An employee was cutting the banding when the pack fell apart. The railroad ties pinned the employee's right leg against a guardrail and the leg was broken.,1
An employee was on a ramp pulling on a cargo strap when the strap broke and the employee fell backward striking his head on the ground and causing a loss of consciousness.,1
"An employee was opening a train gate for a rail company. Before the employee could open the gate, the train struck the gate which knocked the employee down and rendered him unconscious.  The employee sustained fractures to the skull and right eye socket.",1
An employee was feeding the wire stripper and suffered finger lacerations and a fingertip amputation on the left hand.,0
"An employee was using a table saw to cut a 5-inch wide board into two 2-inch long pieces. As he was using a push stick, the cut piece moved under the push stick and kicked back and the 2-inch piece struck him in the right hand and fractured a knuckle.",1
"An employee finished unloading the truck and was getting ready to close the rear roll up door on the truck. As he was holding the roll up door to close it, he stepped off the back of the truck and the door closed on his right hand. His index and ring fingers were broken and the middle finger was amputated and reattached.",1
An employee had begun to shut down a roll coat/top coat machine when material spilled on the carrier rollers. The employee used a tool to reach the roll and remove the material. The machine grabbed the tool and the employee's left arm was pulled into the machine. The employee was hospitalized and a surgical procedure was performed.,1
"An employee was mowing a yard entrance with a brush hog. A pipe fell onto his right foot, breaking the little toe.",1
An employee was troubleshooting a sandblasting auger and suffered amputation of his right leg.,1
"On October 21, 2020, an employee was walking to the break room when she tripped over a rug and fell to the floor. The employee was hospitalized with a fractured right hip.",1
An employee was operating a powered industrial truck and was struck by another powered industrial truck. The employee's foot and ankle were amputated.,1
"An employee was spotting for a lift while it was moving a modular unit. The modular unit swayed and struck the employee, crushing him against a stationary modular unit. The employee was hospitalized with blood vessel damage requiring surgery.",1
"A driver stopped at a convenient store. As he entered the store he thought he saw the truck moving. He ran to the truck, tripped on the curb in the front the store, and fell on his right knee shattering it.",1
An employee was using the groover machine to groove a piece of pipe and amputated his right index finger.,0
"While delivering mail, an employee fell and broke his arm.",1
"An employee was helping direct a skid steer operator when he stepped backward, tripped, and fell on concrete. The employee sustained injury to their head and knee resulting in hospitalization.",1
An employee was securing a handbrake on a railcar. The railcar knocked him to the ground resulting in a fractured pelvis.,1
An employee was moving z-sheeting with a loader. The loader pushed the pile of z-sheeting forward over the steel tip portion of the employee's boot and into his foot. The employee's foot was crushed and the employee hospitalized for surgery to repair the injury.,1
"While walking outside, an employee's shoe got caught on concrete. The employee fell and was hospitalized with a concussion.",1
An employee was on an 8-foot ladder stalling insulated foam board. The ladder shifted and the employee fell to the ground. The employee was hospitalized for a fractured lower leg.,1
An employee was standing at the bottom of a hill. A 20-foot long log rolled down the hill and the employee attempted to stop it. The log rolled onto their leg and fractured it in three places.,1
"An employee was loading a chest freezer to be thrown away. As he was lifting the freezer, the lid opened and one of his fingers was crushed between the lid and the side of the freezer. The fingertip was amputated.",0
"An employee went to check the pump behind the paint line and fell into a man-sized hole at the grating around the pump, landing 6 feet below on piping and the circulation pump. The employee sustained bruising, a laceration to a hand, a scrape on a leg, broken ribs, and internal bleeding.",1
An employee was greasing a bearing on a top sheeter machine when his left index fingertip was amputated. The machine was running at the time.,0
An employee dismounted a garbage truck from the passenger side. The truck then pulled forward and the front passenger-side tire struck the employee's right foot. The employee was hospitalized with a fractured right tibia and multiple metatarsal fractures.,1
"While putting stabilizers in and getting ready to leave the location, an employee's finger was caught between the body of a boom truck and the outrigger/stabilizer resulting in amputation of the right pinky fingertip.",0
"On October 21, 2020, an employee was looking for supplies in the crawlspace above the cooler when she fell through a ceiling tile, clipped a shelf containing dishes, and landed on the floor in the prep area approximately 12 feet below. She was admitted to the hospital for a fractured shoulder, two fractured ribs, and a collapsed lung.",1
An employee was unloading shingles from the pallet on the boom onto the roof and fell from the roof. The employee sustained a fractured left wrist and ankle.,1
An employee amputated his left index and middle fingers while using a metal rolling machine. The employee was hospitalized and underwent surgery.,1
An employee was cutting boxes with a table saw when the blade amputated his left thumb.,1
An employee was washing down his truck when his right middle finger was caught in a pinch point between the drum and the hopper of the truck resulting in a fingertip amputation.,0
"On October 22, 2020, a rehabilitation nurse technician was working in a patient's room when she slipped on water that was on the floor and fell. She fractured her left knee.",1
"Two employees were inside a scissor lift traveling to another location. While passing through a doorway one employee's hard hat hit the door frame, pulling the employee's face up against the door jam. The injured employee sustained fractures to the jaw and facial lacerations.",1
An employee was driving an off road vehicle on a farm road and collided with a pickup truck. The employee sustained head and spine injuries.,1
An employee was working on a line using a pneumatic torque wrench when his left glove got caught in the tool while the wrench engaged. The employee suffered the amputation of his left ring fingertip.,0
"An employee was exiting the rear of a box truck. As he turned around to place his foot on the steps, he slipped and fell. As he began to fall, he grabbed the strap hanging from the rear door but missed the three-point exit handle. His left elbow struck the rear deck of the truck, and the rear door descended and hit his arm. His left elbow was broken.",1
A carpenter was adjusting turnbuckles on concrete forms when his finger got caught between the pipe and the turnbuckle causing his right pinky fingertip to be amputated.,0
An employee slipped on a wet floor and fell. The employee was hospitalized with a broken hip.,1
"While actively suppressing a spot fire, a forest service employee was moving downhill when they lost their footing and fell contacting a large rock which resulted in a fractured femur.",1
The employee was bending down in the stock room in order to pick up a piece of a metal clothing rack. She twisted and her leg gave out causing her to fall to the ground and break her tibia at the knee. The employee was hospitalized for surgery.,1
"An employee was performing tree removal at a condominium when he was struck by a rope, fell backward, and broke his leg.",1
"On October 22, 2020, at 5:30 a.m., a driver was walking to his tractor to begin his route when he was struck by a vehicle. The employee incurred a laceration to his head and two fractured vertebrae requiring hospitalization.",1
"An employee slipped on a wet floor and fell, suffering a broken hip.",1
"An employee was operating a ride-on sweeper in the yard cleaning the concrete pad. He took a turn toward the radial stack conveyor and the sweeper struck a C-channel support beam on the side of the conveyor. The employee sustained lacerations to the face/neck, a compression fracture of the T-7 vertebra, and a punctured lung.",1
"An employee was picking up a 15-pound parts bin. She lost balance or her hip gave out and she fell backward to the floor, landing on and fracturing her right hip.",1
"An employee was putting wall ties into pier form work. He was stepping into and out of the form, slipped on rebar, and fell 2 to 3 feet. A rebar impaled the employee's right buttock.",1
"An employee was putting cement chunks in the loader bucket when his fingers were pinched against the bucket. The employee's index and middle fingers on the left hand were injured, requiring hospitalization.",1
"An employee was using a torch to dismantle a refrigerator. As the torch cut a copper tube the torch burst into flames and the employee sustained burns to the head, face, and neck.",1
An employee was standing near where the iron beams are stored. A forklift operator was positioning the beams in the designated spot when the top beam fell onto the injured employee's right foot and fractured his toes.,1
"An employee was using a tool to reach for a ""kicked out"" chicken that fell into the drip pan. The end of the tool caught on a shackle and was pulled down the shackle line. The tool's handle pinched the employee's left ring finger against the other shackle(s) resulting in a fingertip amputation.",0
"An employee was coming back into the terminal when they slipped on ice and fell to the concrete, striking their head on the ground. The employee was hospitalized.",1
"An employee was spraying water into a concrete truck when they fell from the catwalk of the truck, landing on the ground. The employee sustained injuries to the lumbar region, pelvis, hip, and wrist.",1
"An employee was unstrapping a load of steel wire. The load shifted and fell onto him, causing swelling on the forehead, bruising on the right arm and chest, lacerations to the left arm, and scraped skin on the left ankle.",1
"While walking, an employee tripped on the floor where a drain cover had been removed and fell. The employee's right knee was fractured, requiring hospitalization.",1
An employee was lifting a box of mail into a cage and suffered a shoulder injury requiring hospitalization.,1
An employee was working on a flat roof and fell 14 feet through an opening in the roof created during the work. The employee sustained a fractured wrist and back.,1
"An employee had loaded several 6-foot by 6-inch guardrail posts onto the lift gate of a truck with a covered bed on the back. The employee was riding on the lift gate as the truck was driven at about 5-mph to an installation site 100 yards away. When the truck turned onto a median to change directions, one of the posts slid towards the ground and became caught between the ground and the bracketing. The employee's left leg was pinned between the post and the truck bed, causing crushing injuries and lacerations to the lower leg. The employee was hospitalized.",1
"On October 22, 2020, an employee was walking on a snow-covered driveway to deliver a package to a customer's residence when they stepped on a hockey shooting pad, which was beneath the snow, and slipped and fell to the ground. The employee was hospitalized with a fractured hip.",1
An electrician was working in a junction box. He turned to walk out and his shoulder hit the bar inside of the electrical panel box. He was electrocuted and hospitalized.,1
"An employee was using a line up bar, which is a metal bar with tapered ends. The tapered ends are inserted in the holes of a frame in order to align the frame. While inserting the bar in the holes, one of the ends broke off and struck the employee in the left eye.",1
An employee was unjamming a coin sorting machine and amputated his left ring finger.,0
An employee was clearing a jam in a feed molder when the saw blade amputated their left thumb.,1
"An employee was stepping out of a vehicle when she hit her knee on a metal device in the vehicle. She lost consciousness and fell to the floor, suffering a head injury.",1
"An employee climbed onto a 6-foot step ladder to place a box onto a metal shelf. As the box was being placed, the shelf slipped out of its post slots striking the employee and causing her to fall approximately 2 to 3 feet from the ladder onto the floor. The employee sustained a concussion and a possible cheek bone fracture.",1
An employee was operating a standup forklift to put a rack of windshields onto a rack. After placing the rack of windshields into a rack the forklift backed up and the employee's left foot was crushed between the forklift and the metal rack resulting in fractures to four toes.,1
An employee was operating a drill press. The press caught the employee's gloved left hand and pulled it into the point of operation resulting in amputation of the left index finger.,1
An employee was operating a sanding disc when their thumb was caught in the disc and amputated.,0
"An employee slipped on built-up oil mist on the floor near a machine. The employee fell to the floor, suffering a broken hip and a broken left ring finger.",1
An employee was part of a site clearing operation when a tree fell from an excavator and struck his leg breaking the tibia in three places. The employee was hospitalized.,1
An employee was painting a container using an airless sprayer. The employee cleaned the sprayer with a paint thinner and thinner spilled onto their clothing. The employee then used a propane torch and their clothing caught on fire. The employee sustained third degree burns.,1
"An employee was transitioning from a roof to a ladder when he slipped and fell eight feet, six inches to the ground and sustained a right arm fracture. He was hospitalized for surgery.",1
"A box truck drove into a work zone and struck a truck-mounted attenuator, which in turn struck an employee. The employee suffered multiple abrasions to the face, a laceration to the right eyelid, eye contusions, a laceration to the upper lip, upper and lower incisor avulsions, abdominal pain, road rash on the left elbow and left thigh, rib fractures, and a pelvic crest fracture.",1
An employee was laying a stake and amputated their pinky finger with a sledgehammer.,0
"An employee was spotting as a large tree limb was dragged. A branch broke from the limb and struck the employee, causing possible internal injuries.",1
An employee was lifting a package that weighed over 70lbs. to load it onto a truck when her hip gave out. The employee's artificial hip was fractured.,1
The injured employee was standing between two vehicles and was working on one of them. The other vehicle started and lurched forward pinning the injured employee between the two vehicles.,1
"An employee was climbing onto a tractor when she fell, landing about 4 feet below. She suffered a broken right wrist; a possible fracture of the right foot; and severe bruising to the ribs, back, shoulder, and right arm. The employee was hospitalized.",1
"While walking into a building on the sidewalk, an employee struck a bollard and fell backward. The employee fractured a hip.",1
"An employee was working from an extension ladder. The ladder's feet slipped and the employee fell to the floor 8-10 feet below, suffering a broken knee. The employee was hospitalized.",1
An employee walked out of a trailer and was struck by a forklift that backed out of an adjacent trailer. The employee sustained injury to her left foot.,1
An employee was operating a standup forklift and got his left foot caught between a protective guardrail and the forklift resulting in a crushing injury.,1
An employee was traveling in an elevator at a residential home. The elevator broke and free fell to the lower level. The employee sustained fractures to the left forearm and foot.,1
"On October 23, 2020, an employee was operating a mini excavator and doing demolition work when the excavator tipped over on its side. The employee was hospitalized for a fractured right hip.",1
An employee was removing a broken glass panel when a piece fell and lacerated the employee's lower right leg.,1
An employee was strapping down a shredder for transfer. As he moved the shredder with the hitch his left pinky finger was amputated.,0
An employee was riding on a flatbed trailer when his left foot was caught between the trailer and a trackhoe. He sustained a laceration to his left foot that required stitches and hospitalization.,1
An employee was grinding bar stock on a bench mounted grinder and amputated their left thumb.,0
An employee was performing a leak test and lacerated a thumb. The employee was hospitalized.,1
An employee stepped off an aircraft onto a step stool and fell to the concrete floor. The employee lost consciousness.,1
An employee was trying to enlarge the diameter of wooden rings on a transformer with a router when the router bit caught the employee's glove and partially amputated their right thumb.,0
An employee was bitten by a spider while sitting at a computer. The employee developed an infection.,1
An employee was cleaning the rear window of a tractor while standing on the hitch bars and fell. The employee fractured three ribs and sustained a hemothorax on the right side.,1
An employee was using a knife to cut the tail off a finish roll of plastic at the winder machine. The knife didn't cut through the plastic and the employee's arm was pulled into the machine and fractured.,1
"On October 23, 2020, an employee fell from an 8-foot fiberglass step ladder. The employee fell less than 6 feet and landed on the ladder, suffering five broken ribs.",1
"An employee was cutting a piece of scrap copper when a previously cut piece fell and struck the employee's right ankle, breaking it.",1
"An employee was using an electric grinder on a weld joint, opening up the joint on the bottom flange of a steel beam. The grinding disk caught an edge of the beam, kicked back, and lacerated the employee's neck. He was hospitalized.",1
"At 9:30 a.m. on October 23, 2020, an employee was trying to free a pipe valve on a barge. The valve came loose and the employee slipped and fell, striking the floor of the barge. He suffered a head laceration that required staples, as well as a broken collarbone.",1
An employee was cleaning and setting up an auger for product change and suffered a partial amputation of their right index finger.,0
"On October 24, 2020, an employee was attempting to prevent a jam on the press machine when their right index finger was caught in the discharge folder, resulting in a partial amputation.",0
An employee was cutting a piece of wood on a table saw and amputated a finger and lacerated other digits.,0
An associate was putting lids on pans on a conveyor belt when the belt jammed. The associate was trying to fix the jam when his gloved left hand got caught in the conveyor. The employee's left ring finger was amputated.,1
"An employee was on a moving conveyor in order to replace screws in the overheard carrier system. In the process of walking backward, he tripped on a carrier motor box and his right foot got caught in the nip point of the conveyor system. The employee sustained a broken tibia and fibula.",1
An employee was working on the rig floor. Equipment fell to the rig floor and the employee jumped off the rig onto the ground suffering a compound fracture to the right ankle.,1
"An employee was walking in an aisleway, slipped on oil on the floor, and fell. The employee sustained a skull fracture and a right elbow fracture. The employee was hospitalized.",1
An employee was moving an empty pallet with his foot. A loaded container that was being moved by a forklift struck the empty pallet and the employee's foot was caught between the pallet and a steel frame. The foot sustained fractures that requires surgery and hospitalization.,1
"An employee was making an adjustment on the soybean extruder. A wrench slipped into the mouth of the conveyor, while the employee's finger was caught in the loop of the wrench. The employee sustained a left ring fingertip amputation.",0
"An employee was working on a new power line installation in an existing transformer and sustained third degree burns to the head, left palm and right elbow.",1
An employee was installing steel plates for crane setup. The employee's left leg was caught under a steel plate while attempting to move the plate into place. The employee was hospitalized for a lower leg fracture.,1
A mail carrier fell while delivering a parcel to a house and broke her right leg.,1
An employee was helping set a cooker drive shaft and suffered an amputation to the end of the right index finger.,0
An employee was shot by a robber during an attempted robbery in the restaurant. The employee was hospitalized.,1
An employee was backing a stand-up fork truck out of trailer into the warehouse and struck the bumper of the loading dock at the outside edge of the dock plate. He fell off the fork truck onto the concrete floor in the dock area. The employee was hospitalized for a leg injury that required surgery.,1
An employee was cleaning mirrors when they slipped and fell to the concrete floor and fractured a hip.,1
Cases of beer fell from a double stacked pallet onto an employee causing a compound fracture to the lower right leg near the ankle.,1
"An employee was on a golf cart at the property and was struck by a truck. The employee was ejected from the golf cart and lost consciousness. The employee was hospitalized for knee, wrist and rib pain.",1
An employee was operating the welder machine when his left thumb was caught between two metal clamps and amputated.,1
"An employee was operating a standing forklift inside a freezer warehouse. The forklift slid on a patch of ice, and the employee's left foot was crushed between the forklift and a wall.",1
"An employee was standing on the right side of the chipper chipping debris. A climbing rope was on the ground and had become entangled with the tree limbs. The rope went through the chipper, broke and snapped loose, and struck the employee on the face. The employee had severe bruising and a partially torn left ear. The employee was hospitalized.",1
"An employee was building tires. The employee's left index finger was pinched and lacerated between ingoing rollers, and was later medically amputated.",0
An employee was walking into a warehouse when he tripped over the forks of a parked forklift. He fell to the floor and suffered a broken right hip.,1
"A temporary employee was trying to remove a stuck pallet from a stand-up pallet jack. The movement of the pallet jack against steel racking threw the employee off the jack, and he was pinned between it and the steel rack. He suffered a pelvic fracture.",1
An employee's right ring finger was caught by the block and piston on a nailing machine when the drive fired. The fingertip was crushed and amputated.,1
"An employee was adjusting a chain on a press dryer. The employee's right middle and ring fingers were caught in the chain and sprocket, and the fingertips were amputated.",0
An employee was assaulted by a homeless person and sustained lacerations from a knife.,1
"While walking into work, an employee slipped on ice and struck his head on the ground. The employee sustained a concussion and brain bleed.",1
"An employee was adjusting the forks on a forklift. A fork tine fell off and struck the employee's left foot, breaking a bone.",1
"On October 26, 2020, an employee was stacking plywood sheets on top of saw horses when one of the saw horse gave way. The plywood fell on the employee's left shin, crushing their shin and toes.",1
An employee was climbing up the side access ladder of a mobile crane. He fell from the third step and his lower back struck the ground. He suffered two fractured lumbar vertebrae.,1
"On October 26, 2020, an employee was using a ladder to clear fishmeal from the cyclone funnel meal feeder on an elevated conveyor. While walking on the conveyor, the employee stepped onto a breaker box that was mounted on a pole alongside the conveyor. The breaker box broke free from it's metal mounting bracket, and the employee fell approximately 5'6"" to the floor. The employee's right arm was lacerated by a mounting bracket as he fell. The employee was hospitalized for surgery to close the wound.",1
"An employee tripped and fell in a parking lot, suffering a broken hip.",1
A temporary employee was cleaning with a disinfectant when she began having breathing issues.,1
An employee was band cutting and sustained an amputation injury to her left index finger.,1
An employee was bending over to perform a task when a dolly of bread trays struck him in the back. The hospital was hospitalized.,1
"An employee was climbing down a 6-foot wooden ladder into an elevator shaft. Bricks from the wall began to fall onto him, causing him to jump and land on the ground. He suffered a broken left heel.",1
"An employee was felling trees. A tree that was being felled split and struck another tree causing a limb from that tree to fall and strike the employee in the head. The employee suffered a broken neck, brain swelling and facial trauma.",1
An employee was replacing the filters on the hood system and stepped into the hot oil in a fryer causing burns to the employee's foot.,1
"While inspecting a roof for possible replacement, an employee fell through the roof.",1
An employee suffered amputation of the right middle fingertip while moving a loaded dolly down stairs.,1
An employee was squatting to remove a roll from the labeling machine and fell backward. The employee attempted to break her fall by grabbing the base of the machine and contacted the spindle of the machine resulting in amputation of her left index fingertip. The machine was unguarded at the time.,0
An employee was installing a gutter and fell approximately 11 feet from the roof. The employee sustained a right foot fracture.,1
An employee was traveling between work areas using a utility terrain vehicle (UTV). The UTV struck a log and rolled over. The employee sustained a fractured tibia and fibula.,1
"An employee was cutting tie downs with a pocket knife when the employee cut their stomach, resulting in internal bleeding.",1
An employee caught his finger between a chair and the wall in the break room resulting in an amputation injury.,1
An employee was working on a vertical lathe machine that had an oil leak. The employee used his finger to wipe the oil and his finger got caught between the hydraulic positioning switch and pin resulting in amputation of the fingertip and nail.,1
"An employee was cutting a one-inch PVC type 1 material on a table saw. As the material was being cut, it bound, kicked, and pulled his left index finger into the blade resulting in a partial amputation. The table saw was guarded at the time.",0
An employee slipped and fell backward on a concrete floor that was wet from the rain and broke his right arm.,1
"An Enterprise employee was performing maintenance activities on the P-113 small volume prover. While attempting to remove the chain on the prover, the employee's left thumb was caught between the sprocket and chain and fractured. The employee was hospitalized for surgery.",1
An employee was on the shoulder of a highway when a truck entered the closed work area and struck him. He suffered multiple fractures.,1
An employee was tracking a conveyor belt when skin was peeled from the top of the right hand.,1
The employee was using a pressure washer to clean a water valve. The tip was leaking and the employee was adjusting the tip when the wand was triggered and a stream of water punctured the palm of his right hand.,1
An employee was repairing a non-powered roller conveyor when the tip of their left index finger was caught between two metal conveyor parts and amputated without bone loss.,0
"A forklift was undergoing an icing test inside a 15-foot by 15-foot cold chamber, into which liquid nitrogen had been injected. The nitrogen had become a gas, and when one of the employees entered the space to check on the test's progress, he breathed in the gas and lost consciousness. His head struck the floor. He was hospitalized.",1
An employee was unloading rail cars and came in contact with the indexer. The employee's right foot was caught between the indexer and a rail car causing a laceration to the top of his foot and two fractured toes.,1
An employee was inspecting the engine of a dump truck. The engine was started and an alternator belt amputated one of the employee's fingertips.,0
An employee stepped off a six-inch platform and fell to the ground injuring her head and fracturing a hip. The employee was hospitalized.,1
An employee was standing and talking to another employee when the employee suddenly passed out due to dehydration.,1
"An employee was unloading lime from a pneumatic trailer. The lower portion of the trailer exploded, striking the employee in the head and face and sending him into a steel beam. He suffered multiple fractures to the head and face area.",1
"Four maintenance technicians were unclogging a vacuum line. When they re-energized the vacuum system, an actuator valve inside the vacuum tube crushed one employee's right hand.",1
"An employee was using a grinding lathe with a sanding belt. The employee's right hand came into contact with the belt, causing the amputation of the nail and skin from the tip of the index finger.",0
An employee had his hand close to a stump that was being cut by another employee with a chainsaw. His left ring and pinky fingers were injured.,1
"An employee was performing maintenance on an injection molder when the machine struck his right arm, resulting in a cut, burn, and fracture to the right arm.",1
"An employee was performing steel construction on a commercial building. He climbed out onto the long cantilever and attached his fall protection to the cantilever. The bolts which attached the cantilever to the main structure failed and the employee fell approximately 15 feet onto a hard surface. The employee sustained broken ribs, a broken elbow, and a head laceration.",1
"On 10/27/2020, at approximately 9:10 a.m., an employee suffered a partial amputation of the left thumb while closing the doors of a package delivery truck.",0
An employee was removing a small acetylene tank from the closet when the tank exploded. The employee was hospitalized for second degree burns to the face.,1
"An employee was tracing an electrical line on the roof of a 9-foot-tall walk-in cooler. The employee fell through an uninstalled section of the roof and suffered head and neck trauma, as well as broken ribs.",1
"On October 27, 2020, an employee was mixing chemical products when a chemical reaction occurred and the employee suffered chemical burns to the face.",1
An employee was moving a pallet that contained boxes of washer fluid using a pallet jack. The load became unstable and fell over onto the employee pinning his leg to the concrete ground. The employee sustained a fractured hip.,1
An employee was using a cellular shade cutter and amputated her right middle fingertip and lacerated her index finger.,0
An employee was pouring footers when the concrete pump truck shifted causing the boom and the chute to shift. The chute struck the employee causing a head injury on the right side and a broken arm.,1
An employee was unjamming a piece of equipment and suffered a partial amputation to the right thumb.,0
"An employee was moving machinery within a shop. A pipe from the upper level on a machine fell and struck the employee in the face, causing facial injuries.",1
"An employee slipped on ice in a parking lot and suffered a broken ankle. The employee was hospitalized, undergoing surgery.",1
An employee was connecting a trailer and pinched a finger between the ball and socket resulting in an amputation injury.,0
An employee was walking between machines when he tripped on a bolt that was protruding up from the base of a piece of equipment and fell to the concrete floor. He sustained a compound fracture to his right femur that required surgery and a laceration to the upper lip area.,1
The injured employee approached another employee who was on the first step of the ladder on a truck. This startled the employee on the truck who then fell onto the injured employee and both employees fell to the ground. The injured employee sustained a fractured tibia and fibula.,1
An employee developed lower back pain while pushing a pallet jack loaded with about 200 pounds of motor oil. The employee was hospitalized.,1
"An employee was using a motorized pallet jack to load a truck. His right foot was pinned against a concrete pole, causing an open fracture. He was hospitalized.",1
An employee was checking out a customer whose purchases were on a flatbed shopping cart. The employee tripped over the end of the cart and fell to the ground. The employee sustained a spleen injury.,1
An employee slipped and fell on a wet floor outside a bathroom. She suffered a soft-tissue injury to her lower back.,1
"While walking to his vehicle, an employee slipped on a slab of cement and fell, breaking his right kneecap. He was hospitalized.",1
An employee was cleaning a magnet in a pneumatic dust handling system and pinched and lacerated a finger. The finger was amputated.,1
An employee was caught between the met hood and a column in the ladle refining furnace area. The employee was hospitalized for broken ribs and vertebrae and a punctured colon.,1
An employee was attempting to remove a ballast weight from under a ladder. The ballast weight slipped from his hands and fell on his right middle finger resulting in a fingertip amputation without bone loss.,1
An employee was removing a staple from a wire conductor reel when the staple dislodged from the wood and struck the employee in the eye causing an eye injury.,1
"An employee fell from a roof to the gravel ground, suffering a broken rib, a broken vertebra, and torn ligaments/tendons in vertebrae.",1
A employee was attempting to move a broken electric pallet jack with a forklift. The injured employee attempted to assist the employee in turning the pallet jack upright. He grabbed the wheel well with his left hand and his hand became lodged in the wheel well and was fractured.,1
"The injured employee was assisting with removal of a rotary valve from the flanges of a silo. It was then placed on the floor of the silo for inspection. While Employee 2 was inspecting the rotary valve to ensure it was in good working condition, he noticed there was plastic material inside the rotary valve near the impeller (vane). The injured employee removed the pieces of plastic as Employee 2 turned the outside wheel with his foot. After all the plastic material was removed, Employee 2 moved the outside wheel a final time to ensure free movement of the part. At this time, the impeller (vane) came in contact with the injured employee's middle finger. The injured employee abruptly jerked his hand away resulting in a laceration to his fingertip and fingernail.",1
"An employee was in the basket of an aerial lift, which was being moved across a lane of traffic with help from a spotter truck. A vehicle entered the lane and struck the aerial lift, leaving the employee hanging outside it. The employee suffered minor rib fractures and an abdominal injury.",1
An employee was working from a scissor lift to service a trailer. The employee fell to the concrete ground and suffered head trauma.,1
An employee was working near a skid steer loader when the bucket of the loader came down and struck his left foot. The employee sustained a partial amputation of the foot.,1
An employee was putting plates on a machine for a job change and pinched his right middle finger between the table plate and the apron. The finger was amputated.,0
"An employee was pouring molten aluminum with a hand ladle. The employee stepped into the sand pan to pour the aluminum from the ladle into the mold. The employee caught his left leg on the edge of the sand pan and fell toward the mold with the ladle in his hand. While the ladle broke his fall, the employee was splashed with molten aluminum on various areas of his body. The employee was hospitalized with second and third degree burns.",1
An employee's left ring finger got caught in a door resulting in a fingertip amputation without bone loss.,0
"Two molds were jammed on the line. An employee was attempting to unjam the molds. When the jam released, the molds came together and broke the employee's right tibia and fibula. The employee was hospitalized for surgery.",1
An employee was exiting the rear of the package car. When he stepped down to the concrete dock  with his right foot he slipped and fell resulting in a fractured hip.,1
An employee was walking an order out to a customer and slipped and fell on the sidewalk. The employee sustained a hip injury that required surgery.,1
An employee was climbing an extension ladder and fell to the concrete floor resulting in a back injury.,1
A forklift was moving from one aisle to another aisle and struck a stationary reach truck. The employee's left leg was caught between the two vehicles during the collision resulting in a compound fracture. The employee was hospitalized.,1
"An employee had just finished working on the roof of a building and was climbing down a fixed, caged, steel ladder. He lost his grip and footing and fell to the concrete floor. The employee sustained multiple fractures to the left arm.",1
Employees were removing a motor for replacement when the steel mount/bracket fell more than 20 feet and struck the injured employee on the head causing a head injury and a concussion.,1
"On October 29, 2020, an employee was installing two helical piers when his right index finger got caught in the connecting point of the two piers resulting in an amputation injury up to the first knuckle.",0
An employee was loading parts into the welder when the welder cycled and the employee's hand was caught in the point of operation. The employee sustained a fingertip amputation.,0
"An employee was moving kegs onto a pallet. His right ring finger was caught between the pallet and a keg, causing a laceration and the removal of skin and the fingertip.",1
Aluminum posts were being transported by a forklift when they fell off the forklift and struck an employee. The employee sustained a fracture to the lower leg.,1
A maintenance employee was troubleshooting a thermoforming oven and amputated their left thumb.,0
An employee fell while stepping from a raised planter onto a concrete guard booth foundation. He landed on his right knee and suffered a ruptured knee tendon.,1
"While operating a pavement sweeper, an employee was hit by an incoming vehicle.",1
An employee was climbing shelves when she lost her footing and fell from the second to the bottom shelf onto the floor fracturing her left femur.,1
"An employee was feeding a plastic sheet into a grinder machine. The sheet stalled going into the machine; while the employee was trying to get the feed process to resume, their left foot landed on the sheet just as it began to move. The employee was propelled, causing their right leg to buckle. The employee suffered a broken right leg below the tibia and a dislocated right knee.",1
"An employee was starting a new take-up reel on a cable line. The second wrap of cable overlapped the first (starting) wrap. The employee used a rubber mallet to move the first wrap toward the flange. When the first wrap moved, the second wrap came down and pinned his left thumb against the reel drum. He suffered an amputation to the thumb.",0
"An employee was making 12-inch by 32-inch concrete paver blocks. The employee was checking the blocks for cracks when the fingers cart cycled to collect a pallet of blocks from the stacker. The employee was caught between the fingers cart and the stacker and suffered fractures to the left wrist/arm, left side of the pelvis, and lower back.",1
An employee was operating an extrusion take-up machine and caught his gloved hand between the wire and die resulting in amputation of the left index finger at the first knuckle.,0
An employee bent down to install fuel tank straps on the left side of a truck and hit their forehead on the chassis frame. The employee sustained a head laceration.,1
"An employee was working on a concrete manufacturing machine. As he was attempting to change out the forms, a forklift pulled up with a new form. He stepped sideways over a pit area where the form would sit, fell approximately eight feet, and struck his head. He was hospitalized for a fractured skull.",1
An employee was getting on a forklift and stepped on the accelerator. The forklift went in reverse and his foot was caught between the lift and a concrete wall. The employee's toes were fractured.,1
"On October 29, 2020, a Performance Food Service employee was unloading food products at a customer location when he suffered an exacerbation of an umbilical hernia.",1
An employee was securing a 5-gallon bucket to the bed of a pickup truck. The employee slipped while exiting the wet truck bed and fell onto the closed tailgate. He struck the underside of his arm on the tailgate and sustained a punctured lung.,1
An employee's rain jacket was caught by a running conveyor belt sprocket. The employee suffered a shoulder-to-bicep brachii rupture.,1
An employee was starting a forklift with one foot on the ground and one foot on the forklift. The employee sustained a broken left leg.,1
An employee was operating an order picker. As the order picker was raised the employee's left hand fingers were caught between the order picker cage and a ceiling I-beam resulting in two broken fingers.,1
A temporary employee was operating a scissor lift at the airplane hangar. The lift toppled over onto its side and the employee suffered a broken right arm and a head laceration that required stitches. The employee was hospitalized.,1
An employee was repairing a hoist. The hoist rolled over and amputated the employee's fingertip.,1
"An employee was strapping down a piece of freight inside a trailer. The employee had one strap secured and was securing a second one when the first strap failed. The freight fell onto the employee, breaking the employee's back.",1
"An employee was hooking up a converter between two trolleys. It shifted and caught his left hand between the eye hook and the back of the trailer. He suffered a partial amputation to the little finger (at the second knuckle), as well as bruising to the ring finger.",0
The tree limb that an employee was tied into failed causing the employee to fall and sustain a fractured left ankle.,1
"An employee was standing on a flatbed trailer tying down a tank. The employee stepped backward off the trailer and fell approximately 4 feet to the concrete floor. The employee was hospitalized for a fractured pelvis, fractured ribs, and fractured L2-L5 vertebrae.",1
An employee was moving a die with a cheater bar. The bar slipped and the die landed on the employee's left index finger. The fingertip was amputated.,0
"On October 29, 2020, an employee was operating a plastic CNC machine while standing next to it. The CNC arm rotated, striking the employee in the lower leg and causing a laceration and bruising.",1
"An employee was drilling through a wall when his glove and pinky finger got caught around the drill shaft. The employee sustained a fracture, lacerations, and a partial amputation of the pinky fingertip.",1
"An employee cut a piece of exterior siding and climbed a stepladder onto the scaffold platform to install the siding. The employee fell 8 feet from the scaffold onto the ground and sustained fractured ribs, two cervical fractures, and a brain bleed.",1
An employee working on a threading breaker amputated their right middle fingertip when the machine was activated.,0
An employee was repairing a forklift when they were struck by the forklift's mast resulting in a fracture.,1
An employee was dry cleaning a weigher while standing on top of a three-step step ladder. The employee reached over the weigher and the ladder moved underneath her. She fell and struck her head on the ground.,1
An employee was standing/walking behind a truck and trailer when they were run over by a reversing trackhoe trailer. The employee sustained broken ribs.,1
"An employee was holding a pole with an explosive charge on the end of it, which was being used to de-slag a boiler. The explosive charge ignited and caused lacerations to the employee's left hand which resulted in amputation of the hand.",0
A machine operator was cleaning the conveyor belt when the cleaning pad was caught between the belt and pulley. The employee's gloved hand was then pulled into the moving belt and pulley resulting in amputation of an index finger.,0
An employee was removing leftover rubber from a machine when air buildup blew out of the ram and a 10-12 inch sphere of rubber struck the employee's leg. The employee was hospitalized for contusions.,1
An employee was struck by a powered industrial truck while standing in an open area of the facility causing a laceration to the lower right leg.,1
"An employee was removing a large pin from between two concrete jersey barriers. As one barrier was being lifted, the employee's left index finger was pinched between the metal pin and a U-bolt that was imbedded in the jersey barrier. The employee sustained an amputation.",0
"While constructing a metal shed, an employee fell 12 to 15 feet from metal rafters and landed on the ground. The employee sustained a fractured pelvis.",1
"An employee was standing by the coil saddle preparing to package the metal coil. As the coil was lowered onto the saddle by a gantry crane, it rolled off the saddle and struck the employee. The employee sustained a fractured left femur and kneecap and a contusion to the right knee.",1
An employee was checking the amperage on a generator's power transfer switch when an arc flash caused second degree burns to his hands and first degree burns to his face.,1
"An employee fell while walking down steps, landing on the ground and suffering a broken hip.",1
"An employee was moving a manlift. The manlift's mast got caught under a conveyor, causing the lift to tip and the employee's head to be pinned between the conveyor belt and the lift cage. The employee suffered a head injury and a broken jaw.",1
"An employee was walking when she stubbed her toe on the V-shaped legs of a piece of exercise equipment and fell to the floor hitting her face, left shoulder, left wrist, back, and left knee. The employee was hospitalized with fractures to the patella, wrist, and tibia. The broken patella required surgery.",1
An employee was performing maintenance on a garage door when he felt ill. He was hospitalized with dehydration.,1
An employee was unloading bales of insulation when a bale fell on the employee and caused back and teeth injuries.,1
"An employee was performing maintenance on a vehicle, tripped over an extension cord and fell breaking a hip.",1
An employee was descending a vertical ladder and fell 8-10 feet. The employee sustained a shoulder sprain/fracture and an abdominal injury.,1
An employee was bending rebar on a rod bender machine. The machine malfunctioned causing the bender to jerk back and forth. The employee grabbed the rebar and his right thumb was crushed between the rebar and the bender stop.,1
An employee was washing windows from a roof and fell to the ground. The employee sustained a  broken neck.,1
An employee was in the trailer pulling a piece of rolled product off the trailer when he lost his footing and fell onto the concrete ground. It was raining and the back of the trailer was wet at the time. The employee sustained fractures to the left femur and left wrist requiring hospitalization and surgery.,1
An employee slipped on the door threshold and fell to the ground. The employee sustained a hip injury.,1
An employee fell while climbing down a ladder. The employee landed on the ground and suffered broken vertebrae and a torn muscle in the upper back.,1
The winch cable on a tow truck snapped while a car was being hooked up to it. The tow truck driver jumped out of the truck and ran to stop the car being towed from rolling into another car. The truck hit the car and pinned the driver between two cars.,1
An employee fell down stairs and fractured their left ankle.,1
"On October 31, 2020, the injured employee was walking backwards while supporting part of a wall with two other employees. The injured employee slipped on frost, losing his balance and control of the wall. The injured employee fell and the wall fell on top of him. The employee suffered chest pain and cuts on his forehead.",1
An employee was cleaning dough from a donut plunger between batches. The machine cycled and amputated the employee's right ring fingertip.,0
An employee was struck by a passing order picker causing a laceration and possible fracture of his right pinky toe.,1
"An employee was securing a metal roof when a metal roofing platform gave way, causing the employee to slip and fall to the ground 15 feet below. The employee suffered a broken collarbone and femur.",1
"An employee was oiling and visually inspecting conveyor chains and sprockets. The employee's right index finger was pulled into the chain as he attempted to wipe oil from underneath it. The finger was caught between the chain and sprocket, and the fingertip was amputated.",1
An employee fell and fractured their hip while running away during an active shooter situation in the parking lot of the store.,1
An employee was walking to get a pallet and stepped into the boiler blow down crock and suffered second degree burns to the bottom of their left foot.,1
A lineman acting as a spotter was struck by another vehicle. The lineman sustained head and rib injuries.,1
An employee was operating the floor scrubber and pinched his right index finger between the steering wheel on the floor scrubber and a crossbeam by the storage racks resulting in a partial fingertip amputation.,0
An employee was found on the floor at the bumper cars. He had been moving a bumper car and sustained an electrical shock. The employee was hospitalized.,1
An employee was cleaning toilets at a rest stop and had trouble breathing due to the fumes produced from the mixture of bleach and toilet bowl cleaner.,1
An employee was on a scaffold painting columns. A gust of wind knocked the scaffold down and the employee fell from a height of more than 10 feet. The employee sustained a compound fracture with a dislocated ankle.,1
"A skid steer was pulling a steel truss. The truss got stuck and when an employee tried to free it, his left pinky finger was caught between the truss and the rollers of the winch on the skid steer resulting in a fingertip amputation.",0
"An employee was using a lifting hoist to move a fuel dispenser onto an island for mounting. A hoisting swivel failed, causing the dispenser to fall and land on the employee's right foot. The employee was hospitalized with several broken bones in the right foot.",1
An employee tripped over a telephone cord and fell.,1
"An employee was grinding a 24"" diameter pipe on a jack stand. The pipe fell off of the roller jack stands, catching the employee's ring and little fingers between the pipe and the stand. The employee was hospitalized and sustained a possible surgical amputation to the pinky finger.",1
An employee was on a catwalk unclogging an auger and fell to the concrete ground below. The employee sustained a broken hip.,1
"An employee was operating a can line when a jam occurred on the auto-feeder. While clearing the jam, the employee's glove was pinched by the running conveyor and the employee's right ring and pinky fingers were pulled into the machine, causing a partial amputation to both fingertips.",0
An employee was waiting for his coworker to bring a boom lift to his location. The employee became dizzy and fell approximately 13 feet to the ground. The employee sustained a head injury above the left eye.,1
An employee was moving extension tables in the manufacturing area when the employee tripped over a table and fell. The employee sustained a compound fracture to the lower right leg.,1
"An employee was walking to their car after their shift had ended when they tripped and fell in the parking lot, sustaining a fractured right hip.",1
An employee was offloading a slot machine from a delivery truck using an industrial tilt back dolly. The slot machine fell off the dolly onto the employee's leg. The employee sustained a fractured knee.,1
"An employee removed a high voltage cabinet and went to push a cable through when an arc flash occurred. The employee sustained burns on the right hand, left arm, and the back.",1
An employee was placing carbon steel parts into a fixture so a robot could weld them. The clamp on the fixture actuated and caught the tip of the employee's left little finger. The fingertip was amputated.,0
An employee was attempting to open the top of the tanker trailer and fell to the ground. The employee sustained a fractured skull and fractured ribs and their spleen was removed.,1
"An employee was kneeling on the floor to remove a castor off of the bottom of the 2.5 gallon capping machine. The machine was sitting on a pallet about to be picked up by a forklift. As the forklift lifted the machine, the machine tilted over and fell onto the employee. The employee sustained a broken ankle, a broken foot, and a fractured vertebra.",1
An employee was loading parts onto the read side of a piercing and bending machine when the machine was engaged. The employee sustained a crushing injury to her thumb.,1
An employee was manually igniting a burner at the plant and suffered burns to the left side of the face and on both hands.,1
An employee was manually moving a 55-gallon steel drum away from other drums on a pallet in order to pick up the drum using a drum grabbing machine. The drum shifted and pinched his left pinky above the knuckle. The employee sustained an amputation of the left pinky fingertip.,1
"An employee was moving a steel containment grate. The plant had a water main break and the maintenance employee had to move the containment grate to get a pump into the pit. The steel grating slipped out of his hands and landed on the right index fingertip, pinching it between the concrete floor and bottom of the grating. The employee sustained a fractured finger and an amputation of soft tissue from the finger.",0
"A crew had finished paving a 1200+ ft. stretch of interstate. While the paver was being backed up to its starting point, the paver suffered an unknown mechanical failure that caused the engine to stall. The paver lunged forward and an employee on the paver lost his balance and fell forward onto the floor of the paver seating area. The employee struck his head on the metal handrail, causing a laceration to the head.",1
"An employee was using a table saw to cut wood. The employee's left middle finger made contact with the sawblade, and the fingertip was amputated.",0
An employee was struck by a forklift and sustained a broken leg.,1
"On November 3, 2020, an employee was performing a mammogram on a patient. The patient went limp and passed out while clamped in the mammogram machine. When compression of the machine was released, the employee helped guide the patient's fall to the ground. The employee landed on the floor with the patient on top of them and suffered a fractured left ankle and tibia.",1
"An employee was doing maintenance on a blowout preventer. His left thumb got caught between the torque wrench he was using and the nut, and the first joint of his left thumb was amputated.",0
"At about 1:40 p.m. on November 3, 2020, an employee slipped on a wet floor in a hospital hallway, fell to the floor, and suffered a broken left kneecap.",1
An employee was attempting to clear a jam that occurred inside of a vacuum pipe leading to a tank that holds debris from freshly hatched chickens. The employee removed an access cover to remove the blockage when the knife cage closed on his hand causing a deep laceration that required hospitalization.,1
"At 2:00 p.m. on November 3, 2020, an employee slipped in a puddle of water and fell, suffering a broken ankle. The employee was hospitalized.",1
"An employee was helping unload a skid steer off a truck skip. While positioned with his left foot on the  skid steer's step and his right foot on the tire, he was helping unhook the chains from the truck skip and slipped and fell backward, landing on the rear rail of the truck skip. He suffered six broken ribs and a flail chest injury.",1
"An employee had been helping to load boxes. When the employee went to close the main door, the door closed at a high rate of speed and his right middle finger was caught in the door and amputated.",0
An employee was operating a power shear to cut sheet metal and amputated a finger.,0
"An employee was on the third floor of a structure, crossing an area to get to a staircase. The employee fell through an opening in the floor, hitting the concrete floor one level down and then falling to the concrete floor on the first level. The employee suffered injuries to the right foot and a vertebra in the back.",1
"An employee was mixing acoustic material with a hand drill. The drill caught a rag he was holding, and his left hand was pulled into the turning chuck. His little finger was severely lacerated and fractured, resulting in a partial amputation.",0
An employee was dislodging a rock from the conveyor belt of the rock crusher using a piece of rebar/pipe when the employee's right hand slid into a pinch point between the frame of the equipment and the rebar resulting in a partial amputation of the right index fingertip.,1
A 20-foot tapered I-beam was positioned on a fixed conveyor that is approximately 12 inches off the ground. The beam was placed on the conveyor behind the spray paint booth after it was painted before moving it to the yard. The beam shifted and pinned the injured employee's right leg between the beam and the conveyor. The leg was fractured.,1
"Two employees were putting together a 300-pound steel form for concrete. While the form was being repositioned, it pinched an employee's left thumb, amputating the nail and the tip of the thumb.",0
"An employee was moving items with a forklift when it struck a stack of pallets. The pallets fell onto the employee, who suffered a broken arm, dislocated vertebrae, and a concussion.",1
"On November 3, 2020, an employee was welding a hatch coaming to the deck of a vessel. The metal hatch cover closed on his left hand and crushed it. He was hospitalized, undergoing surgery.",1
"An employee was performing daily preventive maintenance on a boiler and suffered burns to the neck, back, right arm and shoulder when hot water backed up the drain and overflowed onto the employee.",1
An employee had been riding on the back of a garbage truck. Four of his fingers were caught and crushed between the truck and its winch cable.,1
An employee was working on the second level of the building. While he was walking to go on break he stepped on the corner of a floor covering that was covering an opening in the floor. The covering had shifted and the screws that were holding the covering to the concrete broke free. The floor covering flipped up and the employee fell through the opening onto the ground below. The employee fractured his nose and both elbows.,1
"An employee was on a ladder in order to check the attic area for a rodent infestation. The employee fell off the ladder to the ground, sustaining broken ribs and a possible head injury.",1
"An employee was hooking up an ammonia tank to a pickup truck when the pickup truck backed up and struck the employee, resulting in broken ribs, broken vertebrae, and a punctured lung.",1
"An employee was riding on the back of a garbage truck. The employee fell off the riding step as the vehicle began to move, landing on the ground. The employee sustained fractured ribs.",1
"An employee was holding a mandrel while operating a hydraulic press brake. When he engaged the foot pedal, his fingers were caught between the mandrel and the top of the forming die. His right index and middle fingertips were amputated.",0
An employee suffered a severe asthma attack after exposure to cigarette smoke.,1
"An employee was on a ladder, tightening a fitting on a boiler. The employee fell from the ladder's second step to the floor and suffered a hip injury.",1
An employee slipped and fell while walking resulting in broken ribs.,1
"An employee was operating a smooth drum roller. The machine tipped over and pinned the employee's left hand, causing soft tissue and muscle damage to the top lower part of the hand toward the palm area and the middle, ring, and little fingers.",1
"An employee unhitched a tank of anhydrous ammonia. The tank rolled into the employee, crushing the employee's left leg against a pickup truck. The employee's calf was impaled and the employee suffered a fracture in the lower leg.",1
An employee stepped on a steel cable. A frayed wire on the cable punctured the jacket of a 440-volt electrical cable. The employee suffered a shock and was hospitalized.,1
An employee was throwing trash into a dumpster with a half yard hopper. The hopper tipped into the dumpster and its metal bottom edge caught his middle finger against the top edge of the dumpster. The fingertip was amputated.,0
"An employee was inspecting sound wall panel installation. While installing a panel, the adjacent panel that was already installed was bumped and the panel fell onto the injured employee. The employee sustained a broken pelvis and other internal injuries.",1
"An employee fell while walking down steps into a basement. The employee's leg struck a door jamb, causing muscle damage to the leg that required surgery.",1
An employee was observing the warper machine when his right arm got caught on the roller bar and was pulled into the machine. The employee sustained broken ribs as well as a broken right arm and elbow.,1
"An employee was using a bandsaw to cut pork chops. The employee's left hand slipped and made contact with the sawblade, which partially amputated the employee's left thumb.",0
A mechanic was moving steel with a fork truck when the tip of his right middle finger was caught between the steel and the carriage of the fork truck. This resulted in a fingertip amputation.,0
"An employee fell 20 feet into an empty irrigation basin resulting in a broken pelvis, arm, shoulder and ribs. Fall protection was not worn at the time.",1
An employee's left middle finger was caught between two carts and crushed. The fingertip was amputated.,0
"An employee was walking backward on a sloped, 50-foot-long table, pulling supply hoses. He fell off the table, landing on his left side on the concrete about 4 feet below and suffering a broken hip.",1
An employee slipped while picking up a hose and fell backward onto a dirt floor. A protrusion on the floor chipped one of the employee's vertebra.,1
"An employee was bending steel using a rebar bending machine. As the employee was pushing rebar into the steel rollers, the rollers caught the employee's left glove and crushed the employee's left little finger. The fingertip was amputated.",1
"An employee was moving a piece of wood that was preventing a tarp from lying flat. When the tarp came down, his left middle finger was pinched between the trailer frame and the tarp frame. The fingertip was amputated.",0
An employee was bending metal on a CNC brake press. The brake came down on his fingers and amputated one finger at the first knuckle and degloved the other fingers.,0
An employee was walking on a ceiling grid and fell approximately 60 feet through a draft opening striking another employee on a lower level. The employee on the lower level was hospitalized for fractures and other injuries. The employee that fell suffered injuries that resulted in a fatality.,1
"On November 4, 2020, an employee was operating a forklift and struck the side of a trailer. The employee fell off the forklift and their legs were pinned underneath the forklift. The employee was hospitalized for leg fractures.",1
An employee was on a platform lancing a ladle holding liquid steel. He fell forward and his left hand went into the tundish containing liquid metal. He suffered third-degree burns to the hand and was hospitalized.,1
An employee was cleaning a three-way valve when her right hand got stuck inside. She suffered a cut to the wrist and was hospitalized.,1
An employee was operating the lamination machine when her arm was caught in the point of operation and degloved from the elbow to the hand.,1
An employee was performing a sanitation inspection on a machine and amputated their middle fingertip.,0
An employee was clearing a jam in an incline conveyor and sustained left arm and shoulder fractures and a degloving injury to the shoulder.,1
An employee was standing on a step ladder repairing a faulty garage door when he lost balance and fell to the garage floor. The employee sustained fractures and lacerations to the right elbow.,1
A truck driver opened the door at the back of the trailer and the door fell onto the driver's right foot. Two toes were amputated.,0
An employee was placing material onto the rack. He tripped and fell into the chain and sprocket resulting in a finger amputation. The employee was hospitalized.,0
An employee was cutting wood on a table saw and suffered a deep laceration on his left hand.,1
"On November 4, 2020, a customer service technician was at a client's facility when the technician stumbled and fell while walking on an uneven slope along the side of the road. The employee sustained a broken leg and ankle.",1
An employee was struck by a forklift that was backing up and sustained a fractured tibia.,1
"An employee was using a bone-in saw to cut steaks. While he was securing the meat against the plate, the meat slipped and his left thumb came into contact with the sawblade. The blade amputated part of the thumb.",1
"An employee was unhooking the steel stack from the moving lifter in order to have the plates picked up by the suction lifter when the top plate shifted and fell. The sheet slid down and struck the employee's left foot, fracturing the metatarsal bones. He was hospitalized for treatment and surgery.",1
"On November 4, 2020, at approximately 11:45 AM, two Ranger Construction employees were unloading a skid steer loader from a tandem-axle heavy equipment trailer that was attached to a pickup truck. One employee was driving the loader down the trailer's loading ramp when the latch on the truck receiver was released. The weight of the loader on the back of the trailer caused the ring of the trailer receiver to pop up, contacting the latch and pinching the injured employee's left index finger between the latch and the hitch receiver. The fingertip was amputated.",0
"An employee was walking to the elevator, tripped over cables on the ground, and fell fracturing their femur.",1
"An employee was sitting on a mechanic's step stool on wheels installing a pump. The employee extended his feet and the step stool tipped over causing him to fall off. As he was falling, he tried to brace himself and suffered a right wrist fracture that required surgery.",1
"An employee was using a torch to cut a wire. A nearby air line pipe ruptured and blew back into his face, burning his face and head.",1
"An employee began to feel ill while dumping powdered caffeine into a vat. He was hospitalized, suffering from heart palpitations caused by the caffeine.",1
"At about 2:00 p.m. on November 5, 2020, an employee was helping to move an engine mounted on a piece of metal with wheels. As the employee pulled the engine cart, one of its wheels ran over his left foot.",1
"An employee was standing near lumber chains in a sorter area. When the machine was turned on, the front part of his foot was pulled into the chain and sprocket and two toes were amputated. Steel-toed boots were in use at the time.",0
"An employee was draining a sulfuric tank. When the employee disconnected the line that was draining the sulfuric acid, acid in the line sprayed the employee's body.",1
"An employee was using a chainsaw to cut juniper branches. The chainsaw came into contact with a downed branch and kicked back, striking the right side of the employee's face and causing an eye injury. The employee was hospitalized.",1
An employee was bolting a transmission into place on a vehicle that was on a lift when the transmission fell striking the employee on the head. The employee sustained bruising to the head.,1
"A forklift driver collided with an order picker. The employee operating the order picker was pinned between the two pieces of equipment, suffering a lower back injury and fractures to the pelvis.",1
An employee was cutting a stair trimmer with a hand-held grinder. The grinder kicked back and lacerated the back of his hand.,1
An employee was operating a scrap chopper and amputated multiple fingers.,0
"An employee was removing two 6-inch diameter elm trees to create space to fell a larger ash tree. The employee felled the first tree and it fell into the second elm tree. When he cut down the second elm tree, it broke off the stump due to the pressure from the first tree and struck the employee's left leg. The employee was hospitalized for a fractured fibula.",1
An employee was unhitching a farm implement from a tractor and sustained a deep laceration to the right hand and thumb.,1
"An employee was finishing a commercial roofing job. The employee fell from the roof to the ground, suffering a head injury.",1
"An employee was opening a gate when the horse he was riding slipped or bucked, then fell and landed on the employee. The employee suffered a crushed pelvis, with fractures to the pelvis and a lower-back vertebra.",1
"An employee was driving a powered pallet jack. The pallet jack stopped suddenly and the employee fell to the concrete floor. The employee suffered contusions to the back, arm, and head.",1
"An employee was changing a belt on the motor of a blower machine. The employee's left ring finger was pinched between the belt and a pulley; the employee was hospitalized, requiring surgery.",1
"An employee had just helped attach a wagon to a pickup truck, then spoken to the truck driver at the driver's door. The employee began to walk away and the truck drove forward. The back wheels of the wagon struck the employee, causing abdominal and leg injuries.",1
An employee was performing landscaping work when the edger struck a nylon strap that was buried in the mulch. The strap hit the employee in the face and broke his safety glasses resulting in an eye injury.,1
"On November 5, 2020, an employee was removing lumber pieces off the round table. A forklift was picking up a pack of lumber near the round table. The forklift bumped the lumber pack and pinned the employee between the lumber and the round table. The employee sustained a fractured pelvis.",1
"An employee fell while building a scaffold, striking his head.",1
An employee was on a lift measuring a door and fell 61 inches to the ground. The employee sustained a head injury.,1
"A temporary employee was adjusting a conveyor belt. An adjacent motor degloved the employee's left hand, leading to the amputation of the little fingertip.",0
An employee was pinned at the chest between a tractor and a trailer and sustained an acute respiratory issue.,1
"An employee was at the top of a ladder, inspecting above a ceiling. The ladder gave way under him and he fell, suffering a fracture to humerus at the shoulder.",1
"A chemist was handling energetic material in a laboratory when it exploded. The employee suffered a broken right arm and wrist, an injury to the right eye, and metal shrapnel embedded throughout the body. The employee's right hand was medically amputated.",1
"An employee was positioning himself on a tree branch to make a cut. The branch broke and the employee fell, suffering a broken leg.",1
"On November 6, 2020, an employee was changing out a flat tire on a truck. The jack gave way while he was under the truck and the vehicle fell on him, breaking his ribs.",1
"An employee slipped and fell in a corridor, suffering an avulsion to a tendon in her right kneecap.",1
"On November 6, 2020, an employee was holding a fence post that was being placed into position. A tractor's front bucket became dislodged and fell on him, breaking his right ankle, left hand, and ribs. He was hospitalized.",1
An employee was removing a loose candy wafer sheet and caught his left index finger between a moving baking plate and a stationary scraper resulting in amputation at the first joint.,1
An employee was setting up a mill when his right arm was crushed between the mill rollers. The arm was medically amputated at the elbow.,1
"An employee was trying to reset a roll of misaligned bulk paper in a machine. His right little finger was caught between the roll lifting cradle and the lifting piston, and the fingertip was amputated.",0
"On November 6, 2020, a mail carrier was walking down a wooden stairway after a mail delivery. She fell, landing on the concrete in front of the stairway and suffering a broken hip.",1
An employee was repairing the bell mouth when he attempted to use his foot to move a rolling mechanic's chair out of his way. The employee's foot got caught in the vertical uprights of the chair causing him to lose his balance and fall to the ground. The employee sustained a left leg fracture.,1
"An employee was operating the fill machine when the machine became clogged with fill. As the employee was removing the clog, the machine blades lacerated his right index and middle fingers resulting in amputation of the middle fingertip.",0
"An employee was in a bucket truck servicing the breakers and contacted an electrical line (7200V).  The employee sustained burns and tissue damage to his left shoulder, arm and wrist.",1
An employee was walking while carrying a plastic rake. The employee tripped over the rake and fell resulting in a broken shoulder and a laceration on the face.,1
An employee suffered an allergic reaction after walking into a room where medical procedure masks were stored.,1
"After lifting boxes, an employee collapsed, having suffered a collapsed lung.",1
An employee was driving a powered industrial truck (PIT) when it struck a concrete pillar in the warehouse. The employee's foot was crushed between the PIT and the pillar resulting in toe amputations.,1
"An employee was climbing down an 8-foot A-frame ladder. The employee fell near the bottom of the ladder, hitting a shelf and the floor and suffering a broken hip.",1
"An employee was on a roof. His foot slipped on metal roofing that was slippery from dew. He fell, landing on the ground two floors below and suffering a broken ankle and toes.",1
"An employee was standing on a three-step platform ladder, loosening a nut on a bolt. The employee fell to the ground and suffered a broken hip.",1
"An employee was servicing a rear-load trash container. His left index finger was pinched between the container and the back of the truck, and was broken and lacerated.",1
An employee fell 16-17 feet from an aerial lift to the ground and suffered a fractured left femur and shoulder. The employee was hospitalized.,1
An employee fell to the floor while walking and suffered a broken hip.,1
"An employee was helping to move a pipe that was on a forklift and weighed 3,000 lbs. The pipe started to roll and the employee tried to stop it with his foot. The pipe struck his left leg causing a leg and ankle fracture.",1
"After cleaning a heater treater and flushing it with water, employees were preparing to conduct pinhole welding when a flash fire occurred. An employee suffered burns to both arms, from the elbows to the hands.",1
"An employee was working near a backhoe. The boom came down and struck the employee's right foot, breaking it.",1
An employee was operating a walkie-rider and pinned his left foot between the rider and a pallet resulting in an injury to the left foot that required surgery.,1
"An employee was closing down the go-kart ride when a go-kart struck the gate. The gate then rolled into the employee, resulting in abdominal injuries.",1
"An employee was painting a grain elevator garage door from a forklift man basket. The employee fell to the ground 8-10 feet below, suffering a broken right collarbone.",1
An employee fell 14 feet from a roof and suffered a back injury. The employee was hospitalized.,1
"An employee was in the back of a store using a roller dolly. Her shoelace got caught in the dolly's wheel and she fell to the floor, breaking her left hip.",1
"An employee was cutting a tree with a chainsaw. The trunk split and the tree kicked back, landing on the employee. The employee suffered a knee injury and a broken femur.",1
"An employee was cutting ribs on a bandsaw. The employee's right thumb came into contact with the moving sawblade, which amputated the tip of the thumb.",1
A pocket of natural gas ignited and an employee was burned.,1
An employee was transferring a patient from a stretcher to a bed and suffered a bilateral inguinal hernia.,1
An employee was walking around a shopping cart when she tripped and fell. The employee sustained a head injury.,1
An employee was cleaning a pipe line with a water hose. A valve in the reject line actuated and amputated the employee's right index finger at the first knuckle.,0
"A hoist was being used to move a 700 lbs. object. While holding a chain to help direct the object, an employee tripped and was struck by the object. The employee suffered a head/scalp injury, an injury to the left hand, and a left pinky finger injury. The employee required surgery for all injuries.",1
"An employee was standing next to a jockey truck. A pickup truck crossed a marked RTG lane and struck the employee, who suffered a fractured skull, broken vertebrae in the back, and a dislocated left shoulder.",1
"An employee was mopping up water in a flooded room. The employee slipped, hit the wall, and then hit the floor, suffering injuries to the left arm, neck, back, and chest.",1
An agent was bitten by a snake and had a bad reaction to the antivenom.,1
"While closing an overhead door, an employee slipped and fell fracturing an ankle.",1
"An employee was monitoring the extrusion line that manufactures plastic board when it was stopped due to a process upset. When the line stops, material in the line must be cleared out before it may be restarted. The employee was clearing the line when his left middle finger was pinched between a board and the gravity roller causing an amputation to the fingertip.",0
An employee was slicing deli meat. The deli slicer amputated the tip of the employee's left thumb.,0
"An employee was filling anhydrous ammonia tanks. He set the fill hose down on a riser, climbed down the steps of the riser dock to ground level, and picked up the fill hose. The valve opened and released liquid anhydrous ammonia, which sprayed down onto his feet. He suffered burns to both feet and was hospitalized.",1
"An employee was loading medium-sized window frames onto a utility trailer. As he pulled on the rope to tie a frame to the trailer, the knot came undone from the trailer causing the employee to fall backward about 2.5 feet to the ground. His leg was caught in the trailer after the fall. The employee sustained a fractured right leg and was hospitalized for surgery.",1
"An employee was working from a step ladder on a baker scaffold. The scaffold moved, causing the employee to fall from the ladder to the ground about 10-12 feet below. The employee suffered two broken wrists and was hospitalized.",1
An employee was rolling a steel tube beam on a cart. The cart struck a rock on the concrete slab causing the tube to fall onto the employee's foot and fracture toes.,1
"An employee fell while unloading materials onto a scissor lift, landing on a concrete slab about 10 feet below and suffering a head contusion.",1
"On November 9, 2020, an employee suffered an allergic reaction to latex in the strap of goggles they were cleaning. The employee was hospitalized.",1
An employee was cleaning a proximity switch when the cylinder for the cotton press engaged and the block on the latch pivoted and came down on the employee's left hand crushing it between the frame of the press and the block. The employee suffered three broken fingers and tendon damage.,1
An employee was greasing hydraulic quick-connect pins on a loader. The pins were activated and crushed the employee's right index and middle fingers. The fingers were amputated.,0
"An employee was preparing a roof area for work on the next day, including covering a skylight. The employee fell though the skylight onto a concrete surface 20 feet below, suffering severe contusions, fractures, and a concussion.",1
Four employees were dislodging a canister cart ring from a canister. The ring shifted clockwise and amputated the tip of one employee's right index finger.,0
An employee was standing in the bed of a pickup truck dumping leaves from a barrel into the dumpster when the employee slipped and fell from the truck to the ground. The employee sustained a head injury and concussion.,1
An employee was trying to fix a flap near the cutter on a sealer machine. The machine caught her fingers and amputated her right ring fingertip.,0
An employee lacerated his left forearm with a utility knife while cutting a conveyor belt.,1
An employee was on the gondola using a stick to unblock rubber pellets inside the mixer. The track that ran the gondola was turned on and moved forward knocking the employee off the hopper. The employee fell between the gondola and the track below and suffered abrasions. The employee was hospitalized.,1
"An employee was loading an aerial work platform onto the back of a box truck. The platform tipped over and fell, landing on the employee's upper right leg. He was hospitalized for a fractured femur.",1
Employees were shoveling asphalt. One employee's shovel came down on the injured employee's left ring finger and amputated the tip.,0
Three employees were moving a steel door that was on a pallet. The door slid back and cracked the wood cribbing of the pallet and fell onto the employee's right middle finger crushing the fingertip.,1
"An employee was loading a 60-foot power pole onto a pole trailer using a pole crane and choker chain. The chain bound up; the employee grabbed the chain and tried to unbind it. The chain released and caught the tip of the employee's left middle finger, amputating it above the first knuckle.",1
An employee was pushed by a patient causing the employee to fall on the floor. She landed on her right arm and fractured the humerus.,1
"On November 9, 2020, an employee suffered a partial amputation of his left thumb and a laceration on his left index finger while operating a table saw.",0
"Two employees were unloading two pallets from a box truck. As they placed the second pallet onto an electric hand truck, the rear wheels rolled over the dock bridge plate, which caused the front of the plate to tilt up and the hand truck to become stuck. The injured employee attempted to push down and hold the bridge plate by the handle on the left side to free the hand truck and as the hand truck operated it caused the bridge plate to twist and pinch their left fingers between the bridge plate and the back of the truck. The employee's left index finger was injured.",1
A 500-pound pulley slipped and struck an employee. The employee's left little finger was amputated.,0
"An employee was on an A-frame ladder, installing the header of a window frame. The employee fell to the ground about 5 feet below and suffered broken ribs and a broken wrist.",1
"While cutting foam board on a table saw, an employee suffered severe lacerations to four fingers on the left hand that required surgery. The saw was not guarded at the time.",1
A temporary employee moved a wedge that was holding wooden poles. The poles rolled over their hand and caused an open fracture on a fingertip.,1
"At 11:00 p.m. on November 9, 2020, an employee was cleaning a VTA machine. A blade on the machine contacted the employee's left index fingertip, causing an amputation between the fingernail and the first joint.",0
"An employee was unhooking a 6-inch rotary pump from a company vehicle. When the pump came off of the hitch, the jack rolled back and the pump fell to the ground, crushing and amputating the employee's left big toe.",0
"An employee was performing overhead maintenance work from an A-frame ladder. The employee fell from the ladder to the floor, striking his head on the concrete. He was hospitalized for a head injury and fractures to both arms.",1
"On 11/09/2020, at 11:45AM, an employee began to climb an extension ladder. Upon reaching the fourth rung he began to descend the ladder. His left foot slipped between the second and third rungs, causing the ladder to destabilize and fall. The ladder slid down the wall and the employee rode it to the ground, with his foot trapped in the ladder. He sustained a fractured left ankle.",1
"On November 9, 2020, at around 12:00PM, an employee was helping to rescue ducklings from a sewer when the sewer grate came down on their hand. Two fingers were fractured and a fingertip was amputated.",0
An employee was using a utility knife to trim conduit. The knife slipped and amputated the top of the employee's left middle finger.,0
"An employee fell while stepping off a truck. The employee's right knee struck the pavement, suffering a deep bone bruise. The employee was hospitalized.",1
An employee was grinding beans in a meat grinder and amputated their right middle fingertip.,0
"Three employees were riding on a utility terrain vehicle, which was going 12-15 miles per hour. The vehicle lost traction on newly applied gravel and rolled over onto its side. One employee's right leg was pinned and broken by the vehicle's lower frame. He was hospitalized.",1
An employee was bitten by a cat on her right index finger when she reached into a kennel to remove a leash off the cat. The wound became infected.,1
"An employee was installing OSB sheathing on the outside of a prefab home. The employee's staple gun fired a staple into the employee's ankle, penetrating the bone.",1
"An employee was the bucket of a bucket truck, installing a new light bulb at one end of an overhead street light arm. The opposite end of the street light arm fell and made contact with an energized overhead power line. The resulting arc flash caused second-degree burns to the employee's back.",1
"An employee was helping clean out a pool of sodium hydroxide. While the employee was in the pool, the chemical entered the employee's boots (having broken the seal at the top of each boot) and burned the tops of the employee's feet. The employee was hospitalized.",1
"On November 10, 2020, an employee was wiring a power door when his right hand touched a 460-volt live wire. He was shocked, suffering a burn to the right hand, and was hospitalized.",1
"Two employees were trying to retrieve a piece of glass that was buried at the back of a rolling A-frame cart. One of them was holding up pieces of glass (each about 60 by 80 inches) that were leaning out from the stack. Their weight, pushing against the base of the cart, caused the wheels to move. The glass then fell onto the employee, pinning him against the horizontal bar of a piece of equipment about 5 feet away. He suffered internal injuries.",1
"An employee was placing a sheet of plastic on top of a pallet for shipping and fell from a rolling step stool, striking his head. The employee sustained a head laceration.",1
An employee took a step and broke their right ankle.,1
An employee was leaving a cooler area on a pallet jack after dropping off a pallet of material. The employee's lower right leg was pinned and broken between a rack beam and the pallet jack housing.,1
An employee was approaching a potential shoplifter at the front of a store. The shoplifter pulled out a corn knife and severely lacerated the employee's arm several times.,1
"An employee was cleaning up at the end of the shift and putting small hand tools and extension cords away in a large, steel tool box. The employee was holding the tool box lid open with one hand and putting tools away with the other hand when the lid slammed shut causing the amputation of the employee's left ring fingertip.",0
"An employee was tagging a lower bundle when a bundle of cardboard weighing approximately 1,200 pounds fell from above and onto the employee who sustained multiple fractures and was hospitalized.",1
"An employee slipped on an icy metal grate while walking toward a building. The employee fell to the metal grate and the concrete floor, suffering a broken hip.",1
"An employee was on the lift gate of an electric truck. The gate tilted down while it was still 4 feet off the ground; the employee fell to the ground and a cart that had been on the gate landed on the employee's left leg. The employee was hospitalized, requiring surgery.",1
"An employee was working at a gauge. A 12-pound part failed the gauge and the employee picked it up to take it to the rework stand. As she turned, she felt a sharp pain in her lower middle back.",1
An employee dismounted a sit-down forklift to adjust freight boxes on its forks. The forklift began to roll forward and one of the forks pinned the employee's left foot against the wall of a tractor-trailer. The employee suffered a broken first toe and contusions to the foot.,1
Employees were cleaning the lint cleaner machine when one employee's finger was caught in the saw. The injured employee's left index fingertip was amputated.,0
An employee was operating a lathe and suffered a finger amputation.,1
A moving steel plate caught two of an employee's fingers. Both fingertips were amputated between the first and second knuckles.,0
An employee's finger was caught in a door jam as the door closed causing a fingertip amputation.,0
An employee tripped over a clothing rack and broke an arm.,1
An employee was rebuilding a water hydrant. The employee removed the head from the hydrant and then went to the truck to get a rebuild kit. The employee was returning to the hydrant when he was struck by hydrant parts. The employee sustained a 6 to 8-inch laceration to the forehead.,1
An employee fell from the back of a delivery truck and broke his arm.,1
"On November 10, 2020, an employee was on the roof of a two-story, new-build home to install anchor points for fall protection devices. The employee slipped on the wet underlayment and fell 20-24 feet to the ground below, suffering a fractured neck, ribs, and arms.",1
"A fleet mechanic was gathering mileage information from his truck. As he exited the truck, he missed the last step and fell about 14 inches to the ground below. He was hospitalized.",1
An employee was trimming a tree when its root structure gave out. The tree fell and pulled the employee to the ground; the employee lost consciousness and was hospitalized.,1
An employee was using a sander on a piece of metal. The sander slipped and amputated the first joint of the employee's left thumb.,0
"An employee was operating a 50-ton press on a compression mold. When the employee went to flip the mold, the press crushed the employee's right index finger resulting in amputation to the first knuckle.",0
"An employee fell through a skylight onto the concrete floor and suffered a broken back, dislocated right shoulder and a broken right ankle.",1
"An operator was attempting to start a fuel truck, but the truck (air brake type) did not start. It rolled forward and pinned a service crew technician against a large sump pump. Both of the technician's lower legs were broken.",1
"An employee was in a lift basket, removing a plastic tarp from a bridge. The lift moved and crushed him between the handrail and a beam. He suffered crushed ribs and vertebrae and was hospitalized.",1
"An employee slipped on ice while walking out of a cabin at a filming location. His right ankle twisted under him and he fell, suffering a broken ankle.",1
An employee was stripping a ceiling when he lost his balance and fell from a baker scaffold. He suffered a foot injury.,1
"An employee fell from an extension ladder to the concrete slab below, suffering a broken leg and an ankle injury. The employee was hospitalized.",1
"While an employee was clearing a jam on a polyester filling machine, a pneumatically controlled door closed on his right ring fingertip. The fingertip was amputated.",1
"A truck driver was sitting in a truck in the drop yard/lot when a gust of wind caused the truck door to slam shut onto the employee's middle finger, resulting in amputation of the fingertip.",0
An employee was clearing powder from a clogged dust collector on a grinder and suffered a partial amputation of the right index fingertip from the moving rotary valve feeder/air lock at the bottom of the hopper. The machine was not locked out at the time.,0
"On November 11, 2020, an employee was working from an extension ladder when it slipped. The employee fell about 6 feet onto a pallet of bricks below, suffering bruises to the back.",1
An employee was cleaning out a cotton ginning plant when the machine caught his work glove and pulled his left hand into the machine. Four fingers on the employee's left hand were amputated at the second joint.,1
"An employee was using a drill press to bore a piece of wood. The drill bit caught the glove on his left hand, resulting in the amputation of his left thumb.",1
"During a dispute with a customer, an employee sustained a laceration on their back from a pocket knife.",1
An employee was unjamming a blade machine and suffered a finger amputation when it was caught between the pulley and chute.,1
"On November 11, 2020, three employees were stacking two crates on top of each other for transport to a mulching station. One employee was on one end and the other two were on the other; when the top crate was pushed toward the single employee, the employee's left index finger was caught, fractured, and partially amputated between the two crates.",0
"An employee was using lubricant on the bearings of a conveyor roller, which were not turning. They began to turn and a cube of bricks advanced on the conveyor, pinching his left ring finger against a roller. The fingertip was amputated.",0
An employee walked into a closet. A hand tool was dropped from above and lacerated the employee's head.,1
An employee was cleaning a batter mixing machine when their left index fingertip was amputated in a port on the machine. The machine was running at the time.,1
"An employee was using a surface grinder to vent a kickout pin. The grinding wheel ran over the employee's right thumb, causing a partial amputation to the thumb.",0
"Two employees were carrying a 2-by-12 up a ladder. One employee slipped and fell off the ladder, breaking his ankle.",1
An employee fell while walking down a hallway and broke her right humerus.,1
"During an attempted robbery, an employee in the parking lot was shot twice. The employee sustained bullet wounds to the shoulder and leg.",1
"An employee was riding on a pallet on a forklift. The employee's left ring, middle, and little fingers were caught between the forklift and a chain, and were broken and lacerated.",1
"An employee was closing a rolling gate after herding cattle through it. The mechanism at the top caught the employee's left hand and pulled it in, crushing and breaking the index and middle fingers. The employee was hospitalized, undergoing surgery.",1
An employee's right foot was caught and pulled into a chain and sprocket. The foot was broken and the employee was hospitalized.,1
An employee was driving a stand-up forklift when it hit a piece of angle iron and jolted. The employee fell off the forklift and suffered lacerations to the head and arm.,1
"An employee was inspecting a powerhouse transformer. The employee slipped and fell in a containment area (containing less than an inch of standing water), landing on the ground and suffering head and lower leg injuries.",1
"An employee was on an 8-foot A-frame ladder, installing new flex-duct on an HVAC system. The ladder became unstable; it and the employee fell in different directions, and the employee landed on the tile floor. The employee suffered injuries to the left hip and both knees.",1
"An employee was working on a track press machine. The employee's left hand slipped and was caught between two tracks, and the tip of the little finger was amputated.",0
A spray paint can exploded when an employee picked it up. The employee suffered a hand injury.,1
"On November 11, 2020, an employee was climbing down from a crane when he slipped and fell about 3-4 feet to the ground. He suffered a back injury and was hospitalized.",1
"An employee had been working on a hot water heater located above an office. The employee fell through the roof in the shipping area, landed on the floor, and sustained a broken pelvis.",1
An employee's left hand was caught between a container and a flatbed. The employee suffered an amputation to the little finger.,1
"Inside the maintenance shop, two employees were using a mechanical press to remove a shaft from a gear belonging to an overhead crane. While the gear was being adjusted, it slipped and fell, striking one of the employees on the hand. The employee sustained a broken hand.",1
An employee was using a powered pallet jack to move trays into a mixing room. The employee's right foot was caught and crushed between the pallet jack and a concrete bollard; the employee was hospitalized.,1
"While exiting a ready-mix truck cab, an employee fell onto the truck platform 2.5 to 3 feet below. He suffered broken ribs on the left side.",1
"An employee was on a scissor lift, 15 feet above the ground, testing a large vinyl water bladder.  The bladder exploded, causing him to fall from the scissor lift to the ground. He suffered a broken sternum and an abdominal injury.",1
"An employee was lifting a transmission. The transmission fell on his finger, breaking it.",1
"An employee was giving medication to a patient. The patient pushed the employee and she fell to the floor, sustaining a head laceration that required staples. The employee was hospitalized.",1
"On November 11, 2020, an employee was on a product transfer cart between two conveyors. The cart moved and crushed his foot against a conveyor. The employee was hospitalized with fractures to the foot.",1
"An employee was inside a hydro-scaffold to ensure that the scaffold was clear to be lowered. As the scaffold was being lowered, an outrigger arm was caught on a baring plate, causing it to become unseated. The scaffold then fell approximately 10 feet to the ground. The employee sustained a broken pelvis and a lacerated scalp.",1
"An employee was on a chair to reach items in a cabinet and fell, striking their head on the floor.",1
An employee was cleaning out a pump. His right hand was caught in the hopper and the tips of his index and middle fingers were amputated.,0
An employee fell from a step stool to the floor about 27 inches below. The employee's right leg was broken.,1
Two employees were using a hand operated lift and were installing a power box onto the shelf of a rack. The lift moved and caught the left hand of one of the employees against the box which resulted in amputation of the left pinky finger.,0
An employee was performing maintenance on a piece of machinery and suffered a fingertip amputation.,0
"An employee was helping move a lift onto a flatbed truck. The lift moved and struck the employee on the leg, lacerating it.",1
"On November 12, 2020, an employee was routing a floor of an emergency vehicle for an installation. The router jumped out of his hand, causing an avulsion to his left hand. He was hospitalized.",1
"An employee was cutting roofing material with a demolition saw. As he moved from one cutting location to another, the saw cut his left forearm.",1
"An employee was trying to remove a plastic cover from a completed drill pipe. The coating cage basket fell on the employee's right forearm, breaking it.",1
"An employee was changing the bit on a router. The machine was cycled and the bit struck the employee, causing a fracture and a puncture wound to the right foot. The router was not locked out at the time.",1
An employee's right little toe caught a wooden pallet and was punctured by a splinter from it. He was hospitalized.,1
"An employee tripped on a bollard at the edge of a walkway. The employee fell, suffering a broken hip.",1
"An employee was cleaning and doing preventive maintenance on a pasting line. A piece of equipment moved and pinned his left index finger, dislocating it. He was hospitalized and underwent surgery.",1
"An employee was packaging steel coils when a support arm opened, pinching the employee and the steel. The employee suffered a pelvic fracture.",1
"On November 12, 2020, an employee tripped on a box and fell to the floor, suffering a broken left knee. She was hospitalized.",1
"An employee was moving two hand carts when he slipped and fell to the floor. He suffered a broken hip and was hospitalized, undergoing surgery.",1
"An employee fell through a work platform opening on a scaffold, landing on the floor about 20 feet below. The employee's right ring finger was broken.",1
"An employee fell at the last rung of a ladder as she climbed down, landed on the floor, and broke her right knee. She was hospitalized, requiring surgery.",1
An employee was aligning material on a shear machine. The hold-down foot caught his left little finger and amputated the fingertip.,0
"An employee was cleaning a grease trap with a pressure washer. The washer hose ruptured and water, dirt, and other foreign objects were injected into the employee's right hand.",1
An employee was unclogging a pump. Fins inside the pump housing amputated the employee's right thumb.,0
An employee was unloading materials from the back of a truck. The employee fell from the truck to the ground and suffered ankle and knee fractures.,1
"A ship's crew was moving a ship along a dock. One of the ship's lines broke and struck an employee who was walking on the dock. The employee suffered an arm amputation below the elbow, a broken pelvis, and abdominal injuries.",1
An employee fell while buffing a floor. The employee landed on the floor and suffered a neck and back injury.,1
An employee was removing a ship rope from the steel hook on a buoy. The hook crushed his left big toe and second toes. The big toe was medically amputated at the base of the nail.,1
An employee was climbing a ladder to access a roof. The employee fell from a height of 12 feet.,1
An employee suffered finger amputations inside a picker (a large drum with fingers that pull fiber apart).,0
"An employee was cutting through a section of piping when it broke loose and struck the employee in the face. The employee suffered fractures in the jaw and mouth, a broken nose, and chipped teeth and was hospitalized.",1
An employee suffered a bicep tendon separation while grinding fittings. He was hospitalized.,1
"An employee was guiding a gantry crane as it moved a piece of metal. The crane struck him and pinned him beneath it, breaking his left leg, pelvis, and ankle. He was hospitalized.",1
An employee was using a paper towel to dry the bottom of a hopper. The hopper activated and the employee's right hand was caught in the machine's paddle system. The employee suffered a broken right arm.,1
"An employee was working from a 16-foot ladder to replace a cable line at a customer's home. The employee fell from the ladder to the asphalt driveway, suffering a broken right femur.",1
An employee slipped and fell in the parking lot. She suffered a broken left femur and was hospitalized.,1
"Two employees were unloading insulation bundles from the forks on a boom. When the load was detached from the forks, it fell over and landed on one of them, causing broken ribs, a spine and shoulder blade injury, and a collapsed lung.",1
An employee was walking toward a store and fell as she stepped onto the curb. The employee sustained a fractured pelvis.,1
An employee was inspecting the belt of a building exhaust fan on a roof. His left middle finger was pinched between the belt and the pulley and amputated down to the first joint.,0
"An employee was pushing a piece of sheeting on a table saw. The sheeting began to lift; while the employee was pushing it down, the blade amputated the tips of his left ring and middle fingers.",0
"An employee was loading recyclable cardboard onto a compactor loading area. As he pulled a piece of wood out of the loading area, a nail punctured his right little finger. He was hospitalized.",1
"An employee tripped over the corner of a pallet, fell to the floor, and fractured their left hip.",1
"An employee was troubleshooting an air conditioning unit from a ladder. As he reached up to retrieve his phone, his finger entered the belt and pulley of the unit. He suffered an avulsion that resulted in an amputation of his left middle fingertip at the knuckle, just behind the nail.",1
"An employee tripped on a fatigue mat while walking from a register to a self check-out, falling to the cement floor. The employee suffering a fractured left eye socket and their nose was broken in three places.",1
"An employee was running a machine that straightened corrugated boxes. While he was straightening a box by hand, the machine engaged and trapped his left leg, breaking the lower leg in two places.",1
"An employee was cleaning under a rewinder machine. The employee backed out in a crouched position, began to stand up, and turned to get traction. The employee's left foot got caught under the outfeed discharge conveyor; they fell with their foot under the conveyor, landing on their face and suffering a laceration over the eye that required 7 stitches, as well as a left ankle dislocation and tibia-fibula fracture.",1
"An employee was placing parts in storage bins, which were then stacked on top of one another. A forklift came to move a filled bin, and its forks caught on a bin below the one being lifted. The bin struck the employee's right leg, causing a compound fracture of the lower leg. The employee was hospitalized.",1
"An employee's ex-partner showed up at work. After a few words were exchanged, the employee was shot in the abdomen by their ex-partner.",1
"An employee fell to the ground in a parking lot, hitting her knee and head and scraping her arm. She was hospitalized due to the head trauma.",1
"An employee was removing the last chain from a substitute vehicle for a driver that had broken down. The driver went into the cab of the semi-truck and began driving forward. The truck ran over the employee's feet, and the employee was pulled against the tires. The employee was hospitalized with fractured ribs and crushing injuries to both feet and ankles.",1
"An employee tripped while stepping off a platform. He fell about 6 inches, landing on his hip (and on a radio in his pocket). His hip was broken and he was hospitalized.",1
"An employee was painting from stilts. He tripped on a cable and fell to the ground, suffering broken wrists. He was hospitalized.",1
"An employee fell from an elevator to a floor 20-25 feet below. He suffered liver trauma, a lateral lung contusion, and right rib fractures. He was hospitalized.",1
"Employee was working with a 3.5-inch air nail gun to assemble wooden trusses on the production line at a modular home manufacturing plant. As he tried to free a stuck air line running to the gun, the hose cam loose. The gun swung into his leg and fired a nail into the leg above the knee.",1
"An employee jumped up to remove a load lock on a freight truck, landed on the ground, and suffered a torn right ACL and broken tibia.",1
"An employee was testing a two-stage hydraulic ram. The internal components of the ram blew out, puncturing his left forearm at the bottom and exiting at the top. The projectiles did not hit or break any bones.",1
"An employee was standing outside his truck, watching as rigging beams were loaded onto the tractor trailer. A crane was lifting a beam when it swung around, pinning and crushing the employee against another beam. The employee suffered three pelvic fractures and abdominal injuries.",1
"An employee was adjusting a load of roofing material on a flatbed conveyor truck. The employee slipped on snow and fell to the asphalt, suffering three broken ribs and a punctured lung.",1
"An employee was building a brick wall on a roof when he stepped on a blue tarp that was covering an HVAC opening and fell through the opening, resulting in a broken leg.",1
"Employees were trying to start a reactor arm. One of them was trying to adjust a three-groove V-belt that was turning in the pulley but was not in the proper grooves. The employee's left glove was caught and pulled into the pulley grooves, and two of his fingers were amputated.",1
"An employee fell to the ground in a parking lot, suffering a broken right arm.",1
"An employee was riding a railcar to a track area. The employee fell from the railcar, suffering a broken tibia.",1
An employee was doing performing maintenance on a conveyor belt when it caught and lacerated the employee's right little and ring fingers. The fingers were medically amputated.,0
"An employee was breaking down beams on a production line. A steel beam crushed one of the employee's fingers, resulting in an amputation.",1
"An employee was operating a forklift in a warehouse. While making a turn into a crossing lane, the forklift struck another forklift that was parked on the side of the lane. The employee's leg struck the carriage of the forklift and was fractured.",1
"An employee was performing a safety test on a ladder to ensure that it was stable. When the employee shook the ladder, it collapsed and the employee fell on his back. He suffered two broken vertebrae.",1
An employee was cutting a tank with a torch when the tank dropped onto his right foot and fractured it.,1
"An employee was using a concrete saw when it kicked back, lacerating the employee's upper left arm.",1
"An employee was removing a plywood cover over a 6-foot-deep excavation for a post hole sign base. The soil at the edge of the excavation failed and the employee fell into the hole, and his right humerus was fractured with a dislocation at the shoulder joint.",1
"At 2:00 p.m. on November 14, 2020, an employee reached into an energized airlock underneath the hopper of a baghouse. The guard had rotated out of place and the airlock blades/arms partially amputated the employee's right ring and middle fingertips.",0
An employee was feeding product through a crimper. The employee's left thumb entered the gap in the packaging lateral seal and the tip was partially amputated.,0
"At about 3:00 a.m. on November 14, 2020, an employee was checking a molding machine containing seized-up material. As he opened the machine's door and looked down, the molding material gassed off and blew into his face. He suffered facial burns, as well as splatters on the neck and hands, and was hospitalized,",1
An employee was moving an electric pallet jack when it pinned her right leg against a storage rack. She suffered a torn ACL in the leg and was hospitalized.,1
A maintenance employee was adjusting the alignment of a shaft-driven conveyor belt. The rotating shaft bolt and collar caught the employee's sleeve and pulled the employee's right arm into the shaft. The employee suffered multiple fractures to the arm.,1
"An employee tripped over a stationary deli/meat case bumper and fell to the floor, suffering a knee injury that required surgery.",1
Employees were installing a blowout preventer. One employee's hand was caught between the actuator assembly cage and the top drive. His right index finger was crushed and later amputated.,0
"An employee was stacking axles. As he tried to insert a spacer/peg and move a hoisted axle, the axle crushed the tip of his left index finger. The fingertip was amputated.",0
"On November 14, 2020, an employee was mixing burrito ingredients in a mixer. The auger ejected the food mix from the machine. As the employee was trying to get out more of the mix, the auger amputated the end of the employee's right index finger.",0
"An employee was at a construction site to review project work and to direct future project work. After concluding her meeting, the employee was in the driveway returning to her vehicle to leave the construction site when a tree from the abutting property fell and struck the employee, portions of the building under construction, and a vehicle. The employee lost consciousness and suffered skull and brain injuries that required surgery. The employee also sustained neck trauma and bone fractures along with lacerations, bruising, and swelling.",1
"An employee was repairing an air line on a trailer. The line burst and struck him in the eye, fracturing his eye socket. He was hospitalized.",1
An employee was cleaning a roller machine when it amputated one of the employee's fingertips.,0
"An employee fell from a step ladder to the floor, suffering a broken left arm.",1
An employee was burned on the face and arms by a gas fire when he attempted to move the fryer. The employee was hospitalized.,1
An employee was backing an empty electric tugger into a lane when his left thumb was caught between the tugger's steering head and a metal beam. The thumb was lacerated.,1
"An employee was in a grain bin. While stepping over the grain bin sweep, the employee was caught by the sweep and pulled in. The employee suffered leg and arm injuries that necessitated two skin grafts, including missing skin and muscle in the leg.",1
An employee was hospitalized after falling over a seizure mat.,1
"An employee was working in a warehouse. A forklift pushed materials off pallets and they struck the employee, who suffered fractures to the jaw, a broken nose, and knocked-out teeth.",1
An employee was driving a forklift when his foot was caught between the forklift and a guard. He suffered multiple fractures to the foot.,1
"An employee fell while moving plastic totes, landing on the ground and suffering a broken hip and femur.",1
"In the course of an altercation, one employee shot another.",1
"An employee was sitting in a folding chair while working. When he stood up, his foot caught on the chair leg and he fell onto the floor landing on and fracturing his right hip.",1
An employee was using a rag to clean the polish rod on the pumping unit when he right index and middle fingers were amputated.,0
"An employee was trying to stop a metal storage cabinet, which was being blown by a gust of wind, from striking a fuel truck. The cabinet struck the employee and broke his arm.",1
"On November 15, 2020, an employee attempted to lift a patient that had fallen to the floor. The employee experienced abdominal pain and was hospitalized for a hernia that required surgery.",1
An employee fell from the ladder of a wheel loader.,1
"Employees were rigging a piece of pipe. When the pipe was being lifted, the load shifted, and the pipe crushed an employee's left ring finger against a piece of wood. The fingertip was amputated above the nail.",0
An employee was on a ladder in a residential property performing a rodent exclusion. The employee fell from the ladder and struck their head on the floor.,1
"An employee was installing and caulking a rubber boot seal on a vent pipe on a metal mobile home roof. She slid off the roof, falling to the ground about 10 feet below and suffering a broken right tibia.",1
"An employee was removing pins from a crane attachment. The attachment struck the employee's left foot, breaking it.",1
"A roofer tripped and fell off the edge of a roof, suffering a laceration to the right arm from a glass table.",1
An employee was exiting a forklift when his right foot was caught between the forklift and a palletizer. The foot was broken.,1
An employee sustained amputation of their right index finger.,0
"An employee was standing on a slide guard on a roof. One of the anchor brackets ripped out and the employee fell 25 feet, suffering fractures to the skull, a shoulder, and a hand.",1
An employee fell while carrying a piece of lumber and suffered a broken right thumb.,1
"An employee was removing a damaged boiler door using a chain hoist. The door slipped off the hinge and pinned the employee's left thumb, crushing and partially amputating the tip. The employee was hospitalized and another part of the thumb was surgically amputated.",1
"An employee was using a water hose to spray a parking lot. The employee tripped over the hose and fell to the concrete ground, suffering a broken left hip.",1
"After filling a demolition saw with fuel, an employee started the saw up to cut rebar. Gas spilled out of the saw onto the employee's right pants leg, and a spark from the cutting ignited it. The employee's right leg was burned above the knee.",1
"An employee was holding a wire from a wire-drawing machine with a rag. The rag got caught on the draw block and pulled the employee's hand into the machine, causing the amputation of two fingers.",0
"An employee was using a 10-foot rolling stair ladder to access the top of a salt hopper. The employee fell to the ground 10 feet below, breaking both heels and his left ankle.",1
"An employee was moving a safe on a pallet using a pallet jack. The pallet jack got hung up on the floor; the safe tipped and struck the employee in the left leg, breaking the ankle.",1
"An employee was using an electric pallet jack to move an empty chemical tote out of a chemical injection room. The jack's handle struck a full chemical tote, and his left little finger was caught between the handle and the tote. The finger was fractured, with tendon damage that required surgery.",1
An employee was operating a screed and amputated a finger.,0
"An employee was pressing a rag against rollers inside a folding machine. When the machine was jogged, the rag and the tip of the employee's right index finger were pulled into the rollers. The finger was partially amputated.",0
An employee was carrying clean dishes from the dishwasher to the plate caddy when he fell. The plates broke when they struck the floor and the employee landed on top of the broken plates causing lacerations to his hands and forearms. The laceration on his right forearm required surgery and hospitalization.,1
An employee was working on a rotary airlock when it broke and lacerated his left hand.,1
"An employee slipped and fell while getting off a lift gate, landing on the ground about 2 feet below and breaking his right femur.",1
"An employee was preparing to perform maintenance on a crane. While climbing down the crane's platform, the employee fell five feet resulting in fractured ribs.",1
An employee was standing next to his forklift and was struck by another forklift that was backing out of a container. The employee's leg was pinned between the two forklifts.,1
An employee was sitting in a chair when a 66-pound box fell out of a modular stacking system onto the employee's head. The employee suffered a head injury.,1
"On November 17, 2020, an employee was flipping the gating tree and pour cup on the line when the pour cup fell backward and crushed her left index finger on the shaker table resulting in a partial amputation.",0
"An employee was zoning merchandise in a store. As she stood up from a squatting position, she slipped and fell, suffering an injury to the left hip.",1
"A mechanic was working under the hood of a vehicle that would not start, checking while another employee turned on the ignition. The vehicle started and the radiator fan amputated the tip of his left index finger.",0
An employee was working at a stand up desk testing the fat on the meat. The employee stepped back and his foot got caught on a concrete bollard behind him causing the employee to fall to the ground and break his left hip.,1
"On November 17, 2020, employees were replacing a steel core. The injured employee was releasing air from the airshaft by depressing the air valve while a forklift operator was removing the airshaft from the steel core. The injured employee's right index finger was pinched between the steel core and the airshaft causing a partial fingertip amputation.",0
"An employee tripped over a cord behind a cash register and fell to the floor, suffering a broken left hip.",1
An employee had been delivering mail and was walking back to her vehicle from an apartment complex when she fell on the ground and sustained two fractures to the left ankle.,1
"An employee fell off a residential roof, landing on a floor and suffering back injuries.",1
"An employee was cleaning a dough sheeting machine. The machine pulled in the employee's right hand, crushing the middle finger and causing a closed fracture of the ring fingertip. The employee was hospitalized.",1
"On November 17, 2020, at 7:30 p.m. an employee was using a drill press when his glove became entangled in the drill bit resulting in amputation of a finger at the first knuckle.",0
An employee's hands were caught in a centrifuge causing injury to the left index and middle fingers and the right ring finger.,1
"An employee was loading wood from the back of pick up truck onto a smaller dump truck to move the wood to various locations around the property. After loading the dump truck he stepped onto the back of the dump truck's tailgate and fell, breaking his wrist and sustaining other injuries.",1
An employee was transferring wood slabs from the belt to the feed chain when his left hand went under the slab and was pinched by the roller and chain. The employee's left middle fingertip was amputated.,0
"An employee was on an 8-foot A-frame ladder, drilling a pilot hole for a screw. He fell from the fifth rung of the ladder to the concrete floor 3-5 feet below, suffering head and sternum trauma and broken/bruised ribs.",1
The injured employee was assisting another employee to transport a patient on a hospital bed from one unit to another using the outside sidewalk. The wheel of the bed went into the grass. The injured employee grabbed the wheel of the bed at the same time the second employee pulled on the bed. The injured employee's right pinky finger was pulled into the bed rail joint and the fingertip was amputated.,0
"Two employees were preparing to pour concrete to manufacture burial vaults. The belt on the concrete auger broke. One of the employees had replaced the belt and was fixing a twist in it, with his left middle finger under it, when the machine was turned on. The fingertip was amputated about 1/4 inch below the nail.",0
"An employee fell while stepping out of a yard switcher. The employee landed on the ground and suffered a broken left wrist and left hand, contusions to the right hand, and scratches on both knees. The employee was hospitalized.",1
An employee was cutting a backsplash using a cut saw and amputated multiple fingers.,1
"A carpenter was on a ladder to get measurements. As the employee started extending the tape measure, the ladder moved and the employee lost balance. Both the employee and the ladder fell to the ground. The employee sustained a head injury.",1
An employee fell off a flat roof onto the gravel ground. The employee sustained a fractured leg and wrist.,1
"An employee was working from a set of portable metal stairs, cleaning ammunition rounds with a drill brush. The wheel from a cart struck the stairs as the cart was pulled forward, causing the employee's leg to slip off the stairs and be caught between the stairs and a bollard. The employee suffered a broken tibia and fibula and was hospitalized.",1
An employee was removing a jam from a small paper shredder machine. His gloved hand was caught and pinched under a flap. He was hospitalized.,1
"An employee was in a trench encased in concrete that was 4 feet in depth and 5 feet wide cutting an old pipe. When he cut the pipe, a part in the trench collapsed and struck the employee's ankle causing the employee to lose his balance. The saw then contacted the top of his boot and lacerated the top of his foot.",1
"An employee was repairing a bin sorter machine. The machine was turned on and the employee's hand was pulled into the chain and sprocket, causing amputations to three fingers.",0
An employee was operating the rubber mill when their right hand was pulled into the rollers. The right pinky finger was partially amputated.,0
An employee was installing valves on a vessel. He squatted down and grabbed a mid-rail wire rope guardrail. The guardrail loosened and the employee lost balance. The employee then slipped between guardrails and fell approximately 9 feet to a lower deck. The employee sustained a left hip fracture that required surgery.,1
"An employee was operating a forklift to load a trailer at the dock. The trailer moved and the forklift fell between the trailer and the dock. The employee sustained head, neck, shoulder, back, tailbone, and wrist injuries.",1
"An employee was on the outside of a trailer loading conveyor device, trying to break a jam. He fell and hit the back of his head on the concrete, suffering a concussion.",1
"A mechanic was jacking up a gooseneck trailer and resting it on jack stands. The mechanic's hand was caught on the top/end of a jack handle, causing a crushing injury to the top of the hand.",1
"While delivering a package, a letter carrier fell in a leaf-filled ditch and suffered a broken right upper arm.",1
An employee tripped over the cord attached to the patient alarm pad on a wheel chair and fell to the floor. The employee sustained a fractured hip.,1
"An employee was operating a magnetic drill. The drill bit caught his glove, amputating his right thumb.",1
An employee fell from a fixed ladder while climbing down from a roof. The employee landed on the ground and suffered a broken leg or legs.,1
An employee was washing out a drum truck when his left hand was caught between the drum flange and the drum guide. He suffered a laceration and a compression fracture to the hand.,1
An employee sustained an amputation injury to the left index fingertip pad.,0
An employee tripped and fell while walking. The employee struck a rock on the ground and sustained a possible fractured femur.,1
An employee was clearing a jam on the packaging machine and sustained amputation of the left index finger at the first knuckle.,0
An employee was cleaning fryer filters when he slipped and his left foot went into the fryer oil. He suffered burns to the foot.,1
An employee was operating a stand-up fork truck when his foot struck a guardrail and was broken.,1
An employee was unloading material from a telehandler when their fingers were caught in a pinch point between the hook and chain resulting in a fingertip amputation.,1
"An employee fell while climbing down a 6-foot A-frame ladder, landing on the concrete floor and suffering a broken left leg.",1
"An employee fell to the concrete ground, hitting his head on the concrete. He was hospitalized.",1
"An employee was standing next to a parked forklift, wrapping a pallet. Another forklift backed into him and pinned him against the parked one. He suffered muscle injury and severe swelling to both legs.",1
"A carpenter was cutting a 2-by-4 with a miter saw. The employee's left hand came into contact with the sawblade, which amputated his thumb below the nail.",0
"An employee was on a ladder when his neck made contact with a roll of wire energized at about 480 volts. The employee fell off the ladder, striking his head on a transformer box and landing on the ground. He suffered a broken left femur and an open head wound and was hospitalized.",1
"An employee was using a hydraulic shear to cut sheet metal. The machine activated, and the blade amputated the tip of the employee's left middle finger between the nail bed and the joint.",1
An employee stepped off a curb/sidewalk and struck her right knee on a postal vehicle.,1
An employee was lifting and moving floor drain grates. The employee's right middle finger was caught between two of the grates and the fingertip was amputated.,0
"An employee fell from a flatbed (attached to an ATV) to the concrete floor, suffering a broken wrist and a head injury that caused bleeding in the brain.",1
An employee slipped on ice that had accumulated on the floor and fell while stocking shelves in a walk-in freezer. The employee's head struck a storage rack. The employee was hospitalized for a head injury and concussion.,1
"An employee was helping another employee unload concrete manhole rings from a flatbed trailer. The employee's middle finger was pinched between the rings, and the fingertip was partially amputated.",0
"On November 18, 2020, an employee was lifting a 50-pound case of celery when he fell forward and hit his head. He suffered a hernia tear.",1
"A temporary employee was trying to unfold a piece of cardboard between a forklift and its attached grabber. The grabber pinched two of the employee's fingers, causing their amputation.",0
"Two employees were removing a fitting from a hose which was attached to a hydraulic line for a pump, pressurized at 20,000 PSI. The hose came off and hit an employee, amputating his finger.",0
An employee was jogging a paper stack into place when the holding clamp was lowered. It amputated the employee's left middle finger.,1
An employee developed abdominal pain while lifting a 70 lbs. package.,1
"An employee was lacing a bag under the sealing bar of a sealing machine. The bar pinched and lacerated her left index finger, causing partial amputation of the tip.",0
"An employee was leaving an office when their purse got caught on the door handle. The employee lost balance and fell onto the floor, suffering a broken left hip that required surgery.",1
"An employee tripped over some physical therapy equipment in a hallway and fell to the floor. The employee suffered a broken wrist, an avulsion fracture to a neck vertebra, and a head laceration.",1
"An employee was removing a transfer bolt from a 14-inch casting table using his left hand. As he unscrewed the bolt, the platen under the table was lowered. It pulled the screw down through the table top port, smashing the employee's left index and middle fingers between the bolt washer and the table. The index fingertip was amputated and the middle finger was crushed.",0
An employee was cutting a frozen turkey with a saw machine. The saw amputated the employee's left index fingertip.,0
"Two maintenance technicians were working on a scissor lift, cutting a hole in a metal panel on a wall using a circular saw. The saw kicked back and partially amputated one employee's left middle finger.",1
"An employee fell from the bottom rung of a ladder while climbing down, landing on the floor and breaking his right hip.",1
"A 1,700-pound steel plate was being moved with a crane when it came loose, fell, and struck an employee's left foot. The foot was crushed and broken, and the employee was hospitalized.",1
"An employee had lowered the bed of a double-headed planer machine and was about to clean it. He was trying to remove a piece of wood from the machine bed when the blade of the planer kicked the wood out. It struck the employee on the right index finger, causing lacerations to the fingernail and finger, as well as a fracture and partial amputation to the fingertip.",0
"An employee was helping to place an aluminum coil onto an anodizing line. The rollers caught the employee's right glove and pulled in the employee's hand, degloving the thumb and index, middle, and ring fingers. The employee was hospitalized.",1
An employee was trying to retrieve a metal bar from a bundle of metal when the bundle shifted and fell on his left hand. It crushed and amputated the tip of his ring finger.,1
An employee walked into a roof support beam in a shipping dock and suffered a broken nose.,1
"An employee was working from a 6-foot A-frame ladder to mount a mold crossbrace. The employee fell from the top of the ladder to the floor, suffering broken ribs and vertebrae as well as internal bleeding around the hip.",1
"UGI employees were doing excavation work on a the shoulder of a two-lane residential street. One of them was standing in front of a barrier vehicle, in place to protect the work area. A pickup truck struck the barrier vehicle. The employee's right hand was broken and lacerated, either by debris from the barrier vehicle or from the pickup truck's passenger-side mirror.",1
An employee was rotating the rotor of a wind turbine tower. The employee's right index finger was caught by the turbine rotor disc and amputated.,1
"An employee was using a miter saw to cut a 2-by-4. As the employee lowered the saw, the 2-by-4 jumped, causing the blade to amputate the employee's left thumb above the first knuckle.",0
"On November 19, 2020, a maintenance employee was assisting other employees to move equipment from one company location to another. The employees loaded several pieces of fencing/guardrails and a welding machine onto the forks of a forklift. The employees then backed the welder into the trailer and drove several blocks away. Upon reaching the facility, the employees parked the trailer at a dock that had an approximate 15 degree incline. The injured employee went into the trailer to retrieve the equipment and found the fencing had shifted between the welder and the forklift. As the employee attempted to remove the fencing, the forklift began rolling forward striking and pinning the employee between the welder frame and the forklift. The employee sustained fractures and a concussion from the impact of the forklift and was hospitalized.",1
"On November 19, 2020, an employee was spotting for a forklift while it was moving a granite slab. The employee's foot was run over by the forklift and fractured.",1
An employee was walking down a hallway at a jobsite when he encountered a set of staircases and realized it was a dead-end. He went to turn around but lost his footing and fell down the staircase resulting in injured ribs and a punctured lung. The employee was hospitalized.,1
"An employee was jacking up the trailer of an 18-wheeler with an air jack under the rear bumper. The rear bumper broke when the welds failed, and the 800-pound jack fell onto the employee. He suffered a forehead laceration, broken ribs, and a spleen injury.",1
An employee was using a tire balancing machine. A spinning tire on the machine broke the employee's right leg.,1
"On November 20, 2020, an employee was preparing to use a metal shear. As he handled the sheet metal to be trimmed, his right hand slipped toward the shear's blade, which amputated his ring and middle fingers at the first knuckle.",0
"An employee fell 30 feet through a hole in the roof. He sustained fractures to the head, ribs and spine and was hospitalized.",1
"A truck driver was using a ladder to access a large load on a flatbed truck. The ladder slipped on the ground and he fell, striking the heavy steel edge of the trailer and suffering a broken right lower leg and foot.",1
"An employee was trying to pull a part out of the outfeed end of a thermoformer. The scrap wrapped around the chain, which pulled the scrap backwards and in turn pulled her hand into the scrap shear. The shear actuated and amputated her middle, ring, and little fingers above the knuckle.",0
"An employee was walking between a trailer and a truck. He tripped and fell, and a diesel gas can he had been holding cut three fingers on his right hand.",1
"An employee was changing out the propane bottle on a forklift. As he was connecting the line to the bottle, it started to spray propane onto his left hand. He suffered freezer burns to the thumb, index finger, and middle finger and was hospitalized.",1
"An employee was walking to his car when a vehicle struck him. He suffered a fractured pelvis, fractures to three lower-back vertebrae, a broken nose, a head contusion, a laceration to the leg, and a hematoma in the pelvis.",1
An employee was operating power equipment. The employee's left foot slipped off the equipment and was crushed between it and a storage rack.,1
"An employee was exiting a track loader that had just been loaded onto a flatbed trailer. He slipped and fell 5 feet to the ground, suffering a broken leg.",1
"At about 8:00 p.m. on November 20, 2020, an employee was using a crane to remove product from a racking system. A cable broke and the crane tipped forward, ejecting the employee. The employee flew about 10-12 feet into the air, then fell to the concrete floor. The employee suffered two broken ribs, a broken collarbone, a broken tailbone, a punctured lung, and lacerations that required suturing.",1
"On November 20, 2020, an employee was carrying loose plastic to a dumpster. A forklift backed into the employee, who fell to the ground and suffered a loss of consciousness and a skull fracture.",1
An employee was standing on a desk when it broke. The employee fell to the floor and suffered a shattered kneecap.,1
A cow pinned an employee against a fence in a livestock yard alleyway. The cow's horn punctured the right side of the employee's stomach.,1
"At 9:40 a.m. on November 20, 2020, an employee tripped and fell near a piece of equipment while helping the equipment remove excess asphalt. The employee suffered a broken right foot and was hospitalized.",1
"An employee was spotting as a mini-excavator installed a telephone pole. The excavator's boom struck the employee on the left side of his face and his left shoulder, knocking him backwards over a utility pole behind him. He suffered a small laceration to the side of the face and an injury to the shoulder, as well as a lower back injury from the fall. He was hospitalized.",1
"An employee fell while climbing down a ladder, landing on the ground and suffering a head laceration.",1
"An employee was replacing a trailer suspension air spring. Tension was lost between the frame and the spacer, and the tip of the employee's left middle finger was caught between the two. The employee suffered an amputation to the finger.",0
"An employee fell while walking down stairs, breaking his right ankle.",1
"A mechanic was working under a truck that was jacked up. The jack slipped a couple of notches and hit his shoulder, bruising it.",1
"An employee was troubleshooting a hanging light fixture. While climbing an 8-foot A-frame ladder, he lost consciousness and fell from the second step to the concrete floor. He suffered a spine fracture and a head injury, as well as broken ribs and a punctured lung.",1
"The safety cones closing off a lane of traffic were being cleaned up at the end of a shift. An employee was in the basket of the traffic control truck, picking up the cones, when a passing SUV crashed into a guide rail and then into the truck. The employee suffered a head laceration, internal injuries and bleeding, and a fractured pelvis.",1
"An employee was preparing to mop a floor. A mixture of cleaning chemicals produced fumes, causing the employee to develop blurred vision and difficulty breathing after she inhaled them. She was hospitalized.",1
An employee was operating a vehicle when it struck a stationary reach truck. The employee's left leg was caught between the two vehicles and was fractured.,1
"An employee slipped on a wet floor, fell, and suffered a sprained leg.",1
An employee lost his balance and fell.,1
"An employee entered a manhole to assess repairs to a steam distribution line. As he went to inspect a valve on the condensate discharge line on the opposite side of the space, he stepped into a sump pit (14"" in diameter by 18"" deep) that contained hot water. The employee was hospitalized for third degree burns to his foot and ankle and second degree burns to his lower leg.",1
An employee tripped on a plastic strap sticking out from the bottom of a pallet. He fell and hit his head on the floor.,1
"An employee had just finished welding a rear frame assembly and was moving to another work station frame with a hoist. The frame separated from the hoist, striking the employee and causing a leg fracture and a head injury.",1
"A forklift driver got off a forklift to adjust a pallet. The top pallet of products fell, breaking the driver's leg. The driver was hospitalized and underwent surgery.",1
An employee fell to the floor from a rolling staircase ladder while reaching for a product on a shelf. The employee suffered a head injury resulting in a brain bleed and was hospitalized.,1
An employee fell to the floor while running through a building. The employee suffered a broken left femur.,1
"A child walked into a cashier's work area. The cashier tripped on the child, fell to the concrete floor, and struck her head, suffering a head injury.",1
"Employees were loading bales of donations onto the back of a box truck. The truck's lift gate crushed an employee's left thumb, amputating the tip just past the nail.",0
"An employee was cleaning automatic rollers when they caught his left-hand fingers, amputating the middle fingertip.",0
"An employee was using a track excavator to remove the top part of a retaining wall. The excavator skidded on the concrete paving and slid off the top of the retaining wall, landing on the ground below. The employee suffered two broken ribs.",1
"An employee was cutting the hinges off a damaged door using a cutting disk. The door slipped and pinned the cutting disk against the doorframe; the tool then fell onto the top of the employee's left hand, causing a severe laceration that required sutures and overnight hospitalization.",1
"An employee was moving empty pallets with a forklift. When the forklift stopped, the employee fell off to the ground and suffered broken neck vertebrae.",1
"A maintenance employee was attempting to straighten a bent forklift extension so it would not slide off the fork. The fork extension broke, struck the employee, and caused the employee to fall. The employee was hospitalized for lower leg fractures.",1
"An employee was pulling plastic between the wheels on a sealer machine. The machine clamped down on her hand, causing third-degree burns. The machine was guarded at the time.",1
An employee was conducting maintenance on a clogged regrind machine. The machine amputated fingers on the employee's right hand. The machine was energized at the time.,1
"An employee was on a step ladder, storing product on a shelf. The employee fell off the second step of the ladder to the floor, suffering a broken right fibula.",1
"An employee was operating a ride-on pallet jack. The pallet jack slid on a wet floor while turning, and the employee's right foot was crushed between it and a storage rack. The employee suffered multiple fractures and crushing injuries to the foot.",1
An employee was trying to pull a hay bale off a truck. The bale fell on the employee and pinned her to the ground. She suffered broken thoracic vertebrae and lack of feeling and movement in her legs.,1
"An employee tripped on a rock and fell while delivering mail, landing on the ground and suffering a broken hip.",1
"An employee was checking under a truck for leaking oil. The truck was started and drove forward, pinning the employee against tool boxes. The employee suffered five broken ribs and a punctured lung and was hospitalized.",1
An employee was feeding sheet metal into a ductwork roller machine. The metal caught his glove and his fingers were drawn into the machine. He suffered cuts to three fingertips.,1
"An employee was using a pressure washer when the high-pressure water contacted his gloved hand, resulting in a severe laceration that required surgery.",1
"On November 23, 20202, an electrician was replacing a conveyor belt on a multi-stage boom conveyor and ancillary equipment. The employee reached under the running machine to check the tension on the conveyor and his right arm was caught in the machine resulting in a fracture and severe lacerations that required surgery.",1
"An employee was working from a walk board over an empty pool. He fell into the pool and broke both heels. He was hospitalized, requiring surgery.",1
"An employee was working with a crew to lift a gang form with a forklift/tractor over an existing portion of gang form. The employee was on the inside corner of the wall portion of the forms where they were connected on the ground. The tag line caught on the top corner as the form was coming over the existing wall, causing the gang form to rock; the scaffold plank came loose and struck the employee. He fell to the ground, suffering head lacerations, broken ribs, and a possible back injury.",1
"An employee had finished welding on a panel. A forklift lifted the product and steel tubing broke from the assembly, bounced off the concrete, and struck the employee, knocking him to the ground. The employee sustained contusions/bruising to the left arm and leg muscle.",1
"An employee was operating a garbage truck's loading control panel. A dumpster fell off the forks and struck him, causing a concussion and a broken hip.",1
"At 5:30 a.m. on November 23, 2020, an employee was trying to unjam a piece of meat from an overhead rib transfer belt when the employee's arm was caught in the belt. The employee's arm and wrist were broken and the employee was hospitalized.",1
"An employee was rolling garment trolleys along an overhead rail to feed into a chain conveyor. His left glove was caught between a trolley and the conveyor guard, and the tip of his little finger was amputated.",1
"At 6:45 a.m. on November 23, 2020, an employee's right index finger was partially amputated by a skinner blade.",0
An employee was loading a roll of rubber mat into a pickup truck. The mat fell and caught the employee's finger against the bed rail. The employee suffered an amputation.,0
"An employee was filling a 250-gallon container with water while standing on a 30-inch-high trailer. He fell to the ground, breaking four ribs and puncturing his lung.",1
An employee was using a pipe groover. His index finger was amputated in the pipe at the first knuckle.,1
An employee was putting a 17-inch tire on a 17-inch rim when it exploded. The employee suffered internal injuries and needed surgery.,1
An employee was using a slicer to cut cucumbers. The slicer amputated the tip of his left middle finger.,0
"An employee was reaching for a drill when it turned on. The drill's cord wrapped around the employee's left index finger, causing an amputation to the finger.",0
"An employee had just un-banded laminated glass in a crate. A sheet of the glass fell from the crate and struck the employee in the helmet and then the right leg, breaking his tibia and fibula.",1
"An employee slipped and fell to the floor, suffering broken bones in the left forearm.",1
"An employee was standing on a platform washing the outside of the rear of his ready-mix truck. A fin in the slowly turning mixer drum caught the sleeve of his coat and twisted his right arm. He suffered a broken wrist and was hospitalized, requiring surgery.",1
"An employee fell off a portable ladder while working on a truck in the body shop. He landed on the cement floor, hitting his head and suffering a head injury.",1
"An employee had jumped up to reach a nylon rope to close a pull-down door. When he came down, the door jammed and the rope caught his right thumb. The thumb tip was amputated.",0
An employee was cleaning glue off the blade of an undercutter. The undercutter amputated the employee's right index finger.,0
An employee was setting up and running steel coils through an 18-inch slitter. His left little finger was caught in the slitter and amputated.,0
An employee was on a skid steer bucket when his leg was caught between the bucket and the track of the skid steer. His leg was amputated from the knee down.,0
An employee was operating a material handling device when it overturned. One of the employee's toes was amputated.,1
"On November 23, 2020, an employee was reaching from a step ladder to trim a tree branch. The branch came off the tree, struck the ladder, and knocked the employee off the ladder. He fell to the ground and suffered broken ribs. He was hospitalized.",1
"An employee fell 2 feet from the top of a cabinet. His wedding ring got caught on the cabinet's frame while falling, causing the amputation of his left ring finger.",1
"On November 24, 2020, an employee was hooking up two pieces of mobile equipment when a baggage tractor was engaged and struck the employee. The employee suffered crushing injuries.",1
"On November 24, 2020, an employee was coming down an 8-foot fiberglass stepladder when he slipped, falling to the ground about 5 feet below. He suffered a broken leg and was hospitalized.",1
An employee was cutting a piece of trim when it kicked back. The miter saw pulled in the employee's left hand and cut the index and middle fingers.,1
An over-arm bar for a slitting machine amputated the tip of an employee's right ring finger.,0
"An employee was climbing down a 6-foot A-frame ladder. The employee fell at the second step from the bottom, landing on the concrete floor and suffering a broken hip. The employee was hospitalized.",1
An employee was leaning against a door when it opened and her finger was caught in the door hinge. The right index fingertip was amputated.,0
"An employee was in a truck, picking up traffic cones that were closing off a lane. The employee's truck crossed a live lane of traffic and was struck by another vehicle. The employee suffered fractures to both legs and the pelvis.",1
"An employee was using a jackhammer to break up the concrete on a sidewalk. The jackhammer struck a toe on the employee's right foot, breaking it.",1
"An employee slipped from a ladder and fell about 3 feet, striking an aeration pipe clamp and flange joint. The employee suffered two parallel 4-inch abrasions, three broken ribs, and a lacerated spleen.",1
"An employee jumped from a tire storage rack. His finger was caught in a hole in the racking, resulting in a fracture to the finger.",1
"An employee was setting up a liner press. His right index finger was caught by a belt and pulley near the adjustment wheel, and the fingertip was amputated.",0
An employee was using a bandsaw when it caught their glove and amputated their ring finger.,0
"An employee was adjusting the dovetail end of a max ramp for installation onto the I-beam of a trailer. As the tail end was lowered onto the trailer, the employee's fingertip was caught and amputated between the tail and the I-beam of the trailer.",0
An employee was struck by a fork drive beam while restacking boards. The employee suffered broken ribs.,1
"An employee slipped and fell on black ice in a parking lot, fracturing his left tibia and fibula.",1
"An employee was stepping out of a portable toilet when a thrown rock, aimed at the side of the toilet, struck the employee in the hardhat and head. The employee suffered a laceration and broken bones in the right side of the head/forehead.",1
"On November 25, 2020, an employee was driving a used passenger vehicle onto a roll-on/roll-off cargo ship. The vehicle's accelerator got stuck and it crashed into a pole within the ship. The employee suffered a leg injury that required hospitalization and surgery.",1
"An employee tripped on a rug in a supermarket produce department and fell to the floor, suffering hip and arm injuries.",1
An employee was helping a concrete operator. The employee's right thumb was caught in a grooving machine and cut by the blade.,1
An employee was tarping a load of lumber on his truck. He fell off the top of the truck to the ground and broke both wrists.,1
"An employee walk walking toward a time clock when she tripped and fell, breaking her right arm.",1
"An employee was walking through a job site, along a crane mat running along muddy ground, picking up sections of 4-by-6 dunnage. He slipped as he stepped off the mat, and the two 4-by-6 lumber sections he was carrying crushed the tip of his right little finger as they fell to the ground. The fingertip was amputated just below the nail bed.",0
"An employee was using an extension ladder to descend from a roof. The ladder slipped on the wet asphalt, and the employee fell about 10 feet to the ground on top of the ladder. The employee suffered a broken nose; fractures to an eye orbit, the sternum, and a knee; a head contusion; and brain bleeding.",1
"An employee caught her foot on the floor and fell, suffering a broken hip. She was hospitalized.",1
"An employee was carrying a computer monitor down a stairwell. The employee fell down the stairwell, suffering a broken left lower leg and a dislocated left ankle.",1
An employee was using a pry bar to open a customer's tote. The tote gave way causing the employee to fall on the ground and land on his side. The employee was hospitalized with a broken left femur.,1
"An employee was leaving for his break. While walking through the parking lot to get to his vehicle, a vehicle entered the parking lot, forcing the employee to stop abruptly, which caused him to slip on a patch of ice and fall. The employee's ankle was broken.",1
"An employee was working on a 480-volt AC electrical connection motor control center room, changing out motors for baghouse fans. An arc flash burned his left hand and he was hospitalized.",1
While walking back to her desk an employee tripped over a power cord and fell fracturing her right hip.,1
"An employee was cleaning up after working with BB cartridges (an ignition charge assembly) in a rotary machine. Residual HMX under the funnel ignited due to friction, burning the employee's right hand. The employee was hospitalized.",1
"An employee was reaching into a cupboard over a fryer. A small CO2 container (used for whipped cream) was knocked into the fryer and exploded, splashing hot grease onto the employee and causing burns to the employee's face, neck, and forearms.",1
"On November 25, 2020, an employee was trying to reach an upper conveyor belt to fix a jam. The employee's foot contacted the moving lower conveyor belt and his leg was pulled between a metal support bar for the conveyor and the chain of the conveyor belt resulting in a broken leg.",1
"An employee was climbing down a 10-foot A-frame ladder when he fell at the last rung, hitting a sharp sheet metal edge on the wall of the enclosure he was in. He suffered a severe laceration to the right bicep.",1
An employee was unloading supplies for a residential roofing job. He fell off the flatbed approximately 54 inches to the ground and broke his arm.,1
An employee was moving a pump when his left index finger touched a moving impeller. He suffered a partial amputation at the fingertip.,0
"An employee's finger was caught in a leaf spring clip installation machine, between the two forming clamps, when the machine's pneumatic actuators engaged. The employee suffered a fingertip amputation.",0
"While on break, an employee climbed over a stair rail and fell 40 feet to the concrete below, resulting in broken legs and a spine injury.",1
"On November 25, 2020, an armed robber attacked a convenience store cashier with a knife. She was hospitalized, suffering from abdominal stab wounds.",1
"An employee was carrying a box of product in the back of a box truck. The employee slipped, suffering a dislocated ankle and fracture.",1
An employee went to sit on a glass countertop and fell through four panes of glass. The employee sustained severe lacerations to the back.,1
A forklift was carrying a 45-inch wheel assembly as its load. The flange fell from the load and smashed an employee's right little finger.,1
"While discarding cardboard into a baler, an employee was holding the security door with their right hand and disengaged it from the locked position. While pushing cardboard into the baler with his left hand, his right hand slipped off the security door. The door slammed down and amputated his left middle fingertip.",1
"An employee was walking down a hill after making a notch in a poplar tree. The tree fell onto the employee, injuring his head.",1
An employee was descending a ladder when he missed the last rung and fell to the concrete floor. He suffered a broken tibia.,1
An employee was using a compressor grease gun to apply grease to the rotating ring of the mixer drum on the back of a ready-mix truck. Grease built up between the roller and the mixer drum; the employee was trying to remove it when his right index finger was caught between the rollers. The last joint of the finger was amputated.,1
"An employee was doing elevator maintenance. The cable grab system caught his finger, amputating it at the first joint.",1
"An employee was walking along a concrete pathway, tripped on loose pavers, and fell to the ground. The employee was hospitalized with a fractured right hip.",1
"On November 25, 2020, after inspecting a roof for wind damage, an employee stepped onto a ladder to leave the roof. The ladder moved out from under him and he fell to the ground below, suffering broken vertebrae.",1
"An employee was on the shoulder of a road, removing traffic control signs and barrels. An 18-wheeler struck part of the crew tailgate, causing it to become detached and in turn strike the employee. The employee suffered a facial laceration and a concussion.",1
"On November 25, 2020, an employee was frying chicken in a deep fryer. When he unlatched the lid to pull out the chickens, oil came out of the fryer, causing first- and second-degree burns to his hand and torso.",1
An employee was on the third rung of a ladder when it kicked out. The employee fell; the employee's face struck the ground and was injured.,1
"An employee tripped on a steel step at a hot press and fell backwards to the floor, breaking her right wrist.",1
"At about 3:40 a.m. on November 26, 2020, an employee was working on a paper machine, sliding the extractor open to load a roll. The extractor fell onto the employee's left index finger from a height of about a foot, breaking the finger at the tip just behind the nail bed. The employee was hospitalized, undergoing surgery to put a surgical pin in place.",1
"An employee was replacing a gasket on a steam manifold. When the employee loosened bolts on the manifold, steam escaped. The employee suffered first- and second-degree burns.",1
"On November 26, 2020, an employee was loading a missed pallet of bananas onto a truck using a forklift. At that moment, the loaded truck began pulling away. The forklift was caught between the departing truck and the loading dock, then fell an estimated 3 feet to the ground. The forklift remained in the upright position and the employee remained seated. The employee was hospitalized with back pain.",1
"An employee was holding tension on a winch cable while reeling it in when their left hand got pulled into the guidance pin and bridle loop. The middle, ring, and pinky fingers were crushed and the pinky was medically amputated.",1
A border patrol agent was bitten by a service dog on the right thigh.,1
An employee was using braided strap equipment when it amputated the employee's left index finger.,0
"An employee fell on a slippery floor, suffering a broken right knee.",1
"An employee was cleaning a dock-locking mechanism on a solid waste container on the back of a truck. The latching mechanism was engaged, catching the employee's right glove and partially amputating the little finger at the second knuckle.",0
"An employee was skiing on a trail, doing a pre-season terrain check. While in a turn, the employee fell uphill and landed on his left shoulder. The employee sustained a fractured humerus.",1
An employee was walking through the store room when her left foot caught on a dolly. She lost balance and fell forward onto the floor with both arms outstretched in front of her. The employee sustained a facial fracture by the left eye socket and a fractured left arm.,1
"Two employees were installing a new plastic roll on a winder machine. One of them was pulling the film with her left hand from the output side of the machine; the film and the rotating member of the winder caught her left hand, breaking both bones in her left forearm.",1
An employee tripped while going down stairs. The employee fell to the ground and suffered a broken ankle.,1
"Two employees were on a roof, repairing a ladder. One of them slipped on ice and fell off the roof, landing on the ground about 23 feet below and suffering a broken left foot and shattered right heel.",1
"At about 10:30 a.m. on November 27, 2020, an employee was performing maintenance on an exhaust fan in a mechanical room. As the employee tried to grease bearings in the fan, residual energy caused its pulley to rotate. The employee's left middle finger was caught between the pulley and the belt, and the fingertip was partially amputated.",0
An employee was cutting a zip-tie off a Christmas tree when the knife cut his left eye.,1
"An employee was picking up a milking plug off the floor of a rotary parlor. She came into contact with the structure of the rotary parlor as it turned, and it trapped her between the mobile area and the stationary area. She suffered broken bones.",1
"An employee was unclogging a scrap cyclone. The employee's finger was caught between a ladder and a dead blow hammer, and the fingertip was amputated.",0
An employee was working with a pipe cylinder. The cylinder slipped and trapped the employee's right middle finger against a metal work bench. The fingertip was amputated.,0
An employee was using a saw and cut their finger.,1
The injured employee and his coworkers were riding the bus to the jobsite. There was a dirt bump in the road and the driver lost control of the bus. The employee sustained a possible head injury and injuries to his right hip and right hand.,1
"An employee was cleaning and spraying disinfectant on the railing in the community home. As she was walking towards a client's bedroom, she slipped on disinfectant that was on the floor and fell, sustaining a fracture to the lower left leg.",1
"An employee fell from a tug while driving it. The employee's left leg was caught under the tire, causing an ankle fracture.",1
An employee was installing ventilation grating. The employee slipped and fell 15 feet to the ground below resulting in hospitalization for a fractured ankle.,1
"On November 29, 2020, an employee was sitting on a roll of paper as a crane was setting down another roll of paper nearby. The second roll struck his left ankle, breaking it.",1
An employee was moving a refrigerator with a two-wheel dolly when he tripped and went backward. The appliance fell on his leg and broke his thigh bone. He was hospitalized for surgery.,1
"While crossing the street in the front of the store, an employee moved to avoid being hit by a car and fell to the ground sustaining a broken right hip.",1
An employee was working on a conveyors with a load planner when he was struck by a forklift that  ran over his left foot. The big toe on the left foot was amputated.,1
A mail carrier was walking to the door of a house to deliver a parcel when she slipped on black ice on the sidewalk. She fell and sustained a broken right femur.,1
"An employee was helping change a roll on a piece of plastic folding equipment. The employee's glove got caught on the roll, and the machine pulled in the employee's left arm. The employee suffered two compound fractures to the lower arm.",1
"An employee was using a crane to unload two bundles of 8"" square tubing that was 20 ft. long from a flatbed semi-trailer onto the floor. As the employee lowered the square tubing bundles onto two round pipe bundles, the top bundle of round pipe became unstable and fell over, striking him in the knee area of the right leg and knocking him over and under the trailer. The employee sustained a fracture of the right tibial plateau.",1
"A crew was loading an excavator onto a drop deck trailer for hauling. As one employee was placing a steel plate on the deck, the excavator's boom was engaged and caught the employee's right hand. The employee's right middle finger was crushed, and had to be medically amputated.",1
An employee was using a forklift to unload a semi trailer. The trailer pulled away from the dock and the forklift fell to the ground. The employee suffered a broken left leg.,1
"An employee was walking across a loading dock area when a forklift backed out of a truck into her. She suffered a broken hip and two amputated toes, and was hospitalized.",1
"An employee was climbing an extension ladder to tie it to a beam. The ladder slid along the wall and the employee fell to the ground about 12 feet below, suffering head and spine injuries. The employee was hospitalized.",1
"An employee was working at a roof build table. The roof build table is located near the end wall/truss area where a router is used. The employee stepped down off a step ladder, slipped on sawdust from the router, and fell 20 inches to the concrete floor. The employee sustained a fractured left tibia requiring surgery.",1
An employee was walking down stairs when the heel of his foot caught the carpet. He lost balance and fell down 9 stairs. The employee sustained a cut to the top/back of his head and scratches on his forehead.,1
"An employee was cleaning a loading dock. The employee stepped up on the dock step to plug in a blower when he lost his balance and fell, breaking his right hip.",1
"An employee was placing fiber optic cable. A winch rope gained tension and one of the bull snaps failed, lacerating the employee's left palm and fracturing the employee's left little finger.",1
"A dunnage board for setting concrete moved, and an employee's left hand was caught between the board and a concrete panel. The employee's middle and ring fingertips were amputated.",1
A temporary employee was cleaning around a scrap conveyor. He was pulling out scrap from between two belts when his hand was pulled up into the pulley system. Two bones in the hand were broken.,1
"An employee was in training. While a coil was being lifted, the crane swung back, pinching his hand between a skid and a metal plate. The employee was hospitalized and required stitches to the hand.",1
"An employee was checking the contents of a hydro-vac truck. The truck's door was closed while the employee's right arm was inside it, causing lacerations to the upper arm.",1
"An employee was climbing a ladder. She fell from 5 feet up the ladder, landing on her head and back and suffering a broken ankle and two broken ribs.",1
"An employee was collecting carts when he fell to the floor, breaking his ankle.",1
An employee was throwing roofing material into a dump truck from a one-story residential roof. The employee fell into the dumpster and suffered a fractured skull and bleeding inside the head.,1
An employee was clearing a bind between a coil of steel and a coil guide. The guide dropped down and its handle struck the employee in the eye. The employee was hospitalized and lost the eye.,1
A nurse was walking down a hallway when a patient tackled her to the floor. She suffered a broken left hip and a dislocated femur.,1
"An employee was checking a double feed roller hydraulic assembly to see if any obstructions were keeping it from opening all the way. As the employee removed a piece of steel, the employee was crushed in the hydraulic assembly resulting in fractured ribs and vertebrae. The employee was hospitalized.",1
An employee was guiding a steel cover back into position on top of a rail car. The top shifted and the employee's finger was pinched between the brake wheel and the hoisted steel cover. The employee was hospitalized for surgery.,1
"An employee slipped and fell while carrying a rack of glasses. The employee suffered broken ribs, a punctured lung, and internal bleeding.",1
"An employee was on a roof, about to make roof repairs. The employee fell through the roof, landing on a concrete floor about 28 feet below. The employee suffered brain and organ damage.",1
An employee was walking to their vehicle in the parking lot when they fell to the ground and sustained a broken femur.,1
"An employee was moving a steel beam that was inside a dumpster. The employee's left ring finger became caught between the dumpster and the steel beam, sustaining a laceration/avulsion.",1
"An employee was collecting a fuel sample from a vehicle. The vapors ignited when he had a cup of fuel in his hand, and he suffered second-degree burns to the arm and face.",1
"An employee was watching during concrete screeding. The employee was pinned between the concrete paver and the trailer of a semi truck, suffering a strained shoulder.",1
"An employee was unloading freight from a trailer with a pallet jack. He fell out of the trailer, landed on the ground, and injured his right ankle.",1
"An employee's hand was caught between two roof panels. The employee was hospitalized the next day, suffering from hand swelling.",1
"An employee was working under a patio covering when a brace gave way and the covering collapsed. The employee suffered fractures to the right leg, right arm, and left wrist.",1
"An employee was moving a part from a metal stamping press. The pull-backs she was wearing pulled her hands back, but her right middle finger came into contact with the sharp edge of the metal part she was handling and she suffered a severe laceration to the fingertip. The fingertip was partially amputated under the fingernail.",0
An employee was performing roof and/or eve repairs on a residential building. The hammer the employee was using struck his head and he fell from a ladder to the ground. He sustained a skull  fracture and bruising to the ribs.,1
A traffic control crew was picking up signs to move to a different location. An employee was putting the temporary roll-up signs in the traffic control trailer. He sat on the sign while moving to the next sign. Wind caught the sign he was sitting on causing him to fall off the trailer while it was in motion. He was hospitalized with a broken left leg and contusions to his arms and face.,1
"An employee was pushing a barricade into place to block a roadway while others were holding traffic. A passenger vehicle entered the area and struck the employee, breaking the employee's ribs. The employee was hospitalized.",1
"An employee had been making deliveries in a residential area. The employee slid out of the jump seat of the delivery vehicle and struck his head on the steps, eventually striking his head on the ground. The employee was hospitalized.",1
"An employee inhaled smoke caused by dust that had settled on an HVAC system. She developed shortness of breath and chest pain and was hospitalized, suffering from lung irritation.",1
"On December 1, 2020, an employee was assisting a co-worker with unloading a treadmill package when he felt discomfort in his abdomen. He was later hospitalized with an umbilical hernia.",1
"An employee was repairing a hammer mill. The mill's hatch door fell on the employee, breaking the employee's pelvis.",1
An employee was trying to free a lumber slab that had hung up at a saw infeed. The chipper head and saw amputated one of his fingers at the knuckle.,1
"An employee was struck by a shipping tote measuring 5x5x5 feet that fell off a forklift, resulting in a fractured hip and fractured left tibia.",1
"A truck driver was loosening the chain binder on a load of steel beams. The chain binder struck his chin, causing a laceration and fracture.",1
"An employee was using a shovel to excavate roots. The blade was positioned under a root and the employee was using the curve of the blade as a leverage point when the handle snapped. The fractured end of the shovel handle struck the employee's face, causing lacerations to the forehead and eye lid, and a 1mm puncture to the eye.",1
"An employee was using an air hose to clean under a thermal former. The machine grabbed the hose and pulled the employee's hand into the gear, causing the amputation of one of her fingers.",0
"An employee was connecting an HVAC duct inside the facility, tripped over the duct, and fell fracturing his left femur.",1
"An employee was moving metal stock. Two pieces of the metal crushed the employee's fingers, and one of the fingers was medically amputated.",0
An employee slipped on a pair of scissors while walking down an aisle. The employee fell to the floor and suffered a broken kneecap.,1
"An employee was carrying a small, empty pan from a kitchen prep area to a dishwashing station. The employee slipped on a small plastic storage container lid and fell to the floor, suffering a broken right kneecap.",1
"On December 1, 2020, an employee slipped on a patch of ice while walking inside a building. The employee fell to the concrete floor, suffered a broken hip, and was hospitalized.",1
"An employee tripped on a crease in the rug that was behind the register desk, causing her to fall forward on her knee and into the register counter with her hands. The employee sustained a knee injury.",1
"An employee was lifting pipe above his head. The pipe slipped out of the thread protector and its end struck the employee's nose, causing an open fracture.",1
An employee was inserting a piece of wood into the hot press machine when their right hand was caught in the press by the platens. The employee's right hand was crushed and amputated.,0
"A crew of employees had completed pulling a 1,000 foot run of 4/0 insulated ground cable into a cable tray. The employees at the bottom of the tray were tailing the cable in and began to tie into another cable tray. The injured employee was securing the cable that had just been installed and was located about halfway down the conveyor of the 1,000 foot run. The cable that had been pulled into the tray, began to fall out of the tray and struck his left hand, smashing it against the cable tray, resulting in a broken thumb and a laceration between the left thumb and forefinger.",1
A FedEx employee was shot in the back while delivering packages.,1
An employee was using a utility knife to cut fire hose to length when the knife amputated the tip of his left thumb.,0
"An employee was hauling corn in a semi-truck from one farm to another. He climbed a ladder that was mounted to the trailer. While the corn level was rising, the employee went to climb down the ladder to shut the grain off and fell off the ladder approximately 5 feet. The employee sustained a fractured pelvis and injured shoulder, both on the right side of the body.",1
"An employee was using a magnetic lift to lift product to the mixing bowl. Their thumb was caught between the mixing bowl and the guard, after it was bumped by the magnetic lift. The employee's left thumb was amputated one-half inch below the tip.",0
"An employee was retrieving tubing from a pallet. He fell backwards off a nearby edge, landing on the ground about 5.25 feet below and suffering a fractured skull, head lacerations, a broken collarbone, fractured ribs, and a back injury.",1
"While assisting a coworker, an employee was cracking a suction line to determine if hot asphalt was unloading from a truck when they were sprayed with the 460 degree hot asphalt. The employee sustained second degree burns to the left side of their nose, cheek, ear lobe, chin, and part of their neck.",1
"An employee was descending the stairs, missed the last step, and fell to the floor landing on her hip. The employee sustained a fractured hip.",1
"An employee was working at the caustic tank car load rack, assisting with the general preparation of a rail car for loading. The employee was found lying on his back next to the rail car and appeared to have suffered a fall. The employee had pain in the head, neck, hand, and leg.",1
An employee was performing cable installation tasks from a ladder at a height of approximately 20 feet. The employee fell to the ground and sustained fractured vertebrae.,1
"An employee fell from a ladder to the ground, suffering broken ribs.",1
"An employee had been placing pre-warning burning flags in a sugar cane field. When completed, he walked into a grassy area and was bitten on the left leg by a rattlesnake. The employee was hospitalized.",1
"An employee was trying to repair a stuck roll-up door. The door shifted down, causing the chain and sprocket to move and pinch the employee's right middle finger. The fingertip was amputated.",0
"An employee fell while standing on a stair landing, suffering a twisted knee that required hospitalization and surgery.",1
"An employee had just replaced a broken sprocket and put in a new chain on a high-volume oil conveyor. The chain seized up. As he tried to free it, it took off and his left index finger was caught between the chain and the sprocket. The fingertip was amputated halfway up the nail.",0
"An employee was walking down the stairs during a fire drill when he tripped and fell onto the next floor's landing, resulting in a dislocated left shoulder.",1
"Two employees were clearing a jam in a machine. One of them came contacted the roller teeth of a picker in the machine, suffering amputations to two right-hand fingers at the last joint.",0
"Two employees were opening lids on railcars to prepare the cars for loading on a track. Both employees were in full body harnesses and were connected by a self-retracting lifeline (SRL) to a rail fall safety system. The train started moving north and the employees realized that the cars were going to move beyond the fall protection coverage and decided to unhook from the rail fall protection. Employee 1 assisted the injured employee and unhooked from the system. As the injured employee attempted to unhook, the SRL ran out of cable, roughly 25 feet from the rail shed. The injured employee was pulled onto his back and remained stationary on his back, held by the SRL cable, as the rail cars moved under him. The employee sustained a laceration and contusion to the top of the head; bruising and scrapes to the lower back, legs and arms; a cut on the right hand; and a bruised thumb.",1
"An employee was erecting scaffolding at a height of less than 5 feet. He lost his balance and jumped off the scaffolding, landing on the concrete floor. He suffered a broken left leg and left knee.",1
An employee was installing siding from a work platform about 4-5 feet above the ground. The employee fell off the platform to the ground and suffered facial and wrist fractures.,1
An employee's right hand became entangled in the cable on a block-and-tackle charge hoist and was pulled into the block. The right ring and pinky fingertips were amputated.,0
An employee was walking toward the cash register when she slipped on a wet floor and fell. The employee sustained a fractured sacrum bone and contusions of her hand and wrist.,1
An employee was retrieving a pipe from a rack when he stepped on an unsecured hot water pit cover and his leg went into the pit. He suffered burns to his legs.,1
"The employee was monitoring a plastic injection molding machine during it's start up/warm up phase. The employee observed excess product sitting in the bottom of the machine. As the employee was removing the product, a sprocket/gear on the machine grabbed the employee's left arm and pinched it just above the wrist. The employee sustained a cut on the left arm and wrist, which affected bones and tissue.",1
"An employee was helping to unload countertops when the countertops shifted, pinning the employee against the wall and the floor. The employee sustained a fractured wrist and a punctured lung.",1
"At 12:20 p.m. on December 2, 2020, an employee was on a ladder putting boxes on a shelf. The ladder slipped and the employee fell about 8 feet, landing on top of the ladder. The employee suffered chest, lower back, and leg pain.",1
"While an employee was deburring a plate, the plate got caught between the spinning disc and the machine table, cutting the employee's thumb and pushing it toward the spinning disc. The employee's thumb was then pinched between the plate and disc, leading to an amputation of the thumb tip.",0
"An employee was putting frozen chicken on a conveyer belt. The belt was bouncing a lot, and a 40-pound chicken fell; as the employee tried to catch it, it caused the amputation of the employee's right middle fingertip.",0
An employee came into contact with an energized 480-volt electrical line while moving a transformer. The employee suffered second-degree burns to the right hand and neck and was hospitalized.,1
"On December 3, 2020, an employee was operating a forklift and stopped to talk to another employee. While pulling away after the conversation, the employee's left hand was caught between the vertical roof support beam on his forklift and the open cab door of the coworker's vehicle. The employee sustained lacerations and crushing injuries to the left hand, and the left index finger was surgically amputated.",1
"An employee was on a step ladder hanging Christmas decorations. The employee fell from the ladder to the floor, their head striking a freezer as they fell. The employee suffered a skull fracture, broken vertebrae, and a possible brain bleed.",1
"An employee fell approximately three feet off a lift gate while trying to stabilize forklift propane fuel cylinders, resulting in a broken jaw.",1
An employee inhaled smoke while putting out a waste basket fire.,1
"An employee was doing grounds maintenance with a tractor, and was out of the tractor when it rolled, pinning the employee against a steel fence post. The employee was hospitalized with five broken ribs and right arm injuries.",1
"At about 3:00 p.m. on December 3, 2020, an employee was switching out a one-ton chlorine cylinder in an ethylene glycol unit when a chlorine leak developed. The employee inhaled chlorine gas and was hospitalized.",1
"An employee was pressing a bushing into an aircraft part using a rod bushing setting tool and a 5-ton arbor press mounted to a table. While the employee was pulling down the lever on the arbor press to seat the bushing into the aircraft part, the rod tool snapped, causing the employee to lose his balance and fall on his left knee. He suffered a broken left femur.",1
"An employee slipped on a wet floor and fell, leading to a lower back injury.",1
"An employee was walking at a jobsite, stepped on a hose, and slipped in friction reducer compound. The employee fell on the ground and broke a kneecap.",1
An employee fell in the parking lot while walking to work and sustained a fracture in their lower left leg.,1
"An employee was trimming parts in a 50-ton trim press. While he was retrieving a part, the press cycled and came down on the fingers of his left hand, partially amputating the index and middle fingers. The employee was hospitalized.",1
An employee slipped on ice while walking to her car. Her head struck the trunk of the car and she suffered a concussion.,1
An employee was cutting wood with a circular saw when the saw jammed and amputated the employee's left middle finger at the second joint.,0
An employee suffered a right eye injury while pulling a golf club shaft out from the golf club's head.,1
An employee working at a site slipped and fell on an icy ramp. The employee sustained a fractured left hip.,1
"A Steeltech employee was using a hoist to lift an 8-10 foot, 150-200 pound handrail for installation on a staircase. The shackle snagged as the rail was lifted, and the welding point on the staircase snapped. The top two steps of the staircase collapsed and struck the employee's lower back, breaking his tailbone and lacerating his right leg. He was hospitalized and underwent surgery.",1
"On 12/3/2020, an employee fell from a bar joist. He was later admitted to the hospital for breathing issues, fractured ribs, and a fractured tailbone.",1
"An employee was using a pin press machine to put pins in the back of a heat exchanger louver blade. His right hand was caught between the blade and a hydraulic component, causing a partial amputation to the index fingertip.",0
An employee was operating a swaging machine and amputated a fingertip.,1
"An employee was on a ladder verifying welds. The ladder slipped and the employee fell to the ground, suffering a broken ankle and elbow. The employee was hospitalized.",1
"An employee was working from a step ladder, leveling grain in a semi-hopper trailer to allow the tarp to close. The step ladder tipped over and the employee fell to the ground fracturing his right ankle.",1
An employee was operating a cherry picker when it struck a concrete column. The employee was ejected from the cherry picker and landed on the ground. The employee was hospitalized with a fractured ankle.,1
"An employee hit their knee on the drawer under their desk, causing them to fall, hitting the front of their head on the desk and the back of their head on the floor. The employee sustained a concussion and lost consciousness.",1
"An employee was in a harness within a bucket truck when a cable on the boom snapped, causing the boom to fully retract. The employee then slammed into the bucket, resulting in six broken ribs and a herniated disk.",1
"An employee was on a roof performing work using a wedge-shaped cushion. The cushion slid and the employee fell from the roof to the ground below, sustaining fractured vertebrae.",1
An employee was assisting a coworker in attaching two hooks of a four-legged sling to a mower when the employee's finger was pinched between the hoist hook and the mower attachment point. The employee sustained an avulsion on his left-hand pinky finger.,1
An employee slipped and fell to the ground. The employee was hospitalized with fractures to both wrists.,1
"An employee was using a chainsaw to cut fronds from a tree. The chainsaw caused two, approximately 3-inch lacerations, to the employee's left forearm.",1
An employee was taking the temperature in a milk tanker. He slipped and fell 10.5 feet from the top of the trailer and landed on the ground between the safety railing and the tanker. He suffered a fractured left shoulder and a tear to the right shoulder.,1
"An employee was cleaning off the cutter head of a molder machine when his glove was caught and pulled into the cutter, resulting in an amputation of the right index finger to the second knuckle.",0
"An employee was helping clean up used pallets and material in a grocery receiving area. A forklift backed onto the employee's foot, breaking the employee's ankle. The employee was hospitalized.",1
An employee had been walking and checking a skid count of items received. The employee was struck by a forklift and sustained an amputation injury to a foot.,0
An employee was clearing noodle debris from the wrapping machine when the gear and sprocket amputated their right middle fingertip.,0
"An employee was operating a rough-terrain forklift when it turned over on the boom side. The employee suffered a partially collapsed lung, a broken scapula, and broken ribs.",1
"On December 4, 2020, at 4:30 a.m., an employee was trying to remove the leading edge mouse on the glue box during a routine cleaning task on a paper machine. The employee used both hands to pull the mouse when it jerked backwards, catching the employee's gloves between the mouse hook and the glue box and causing an amputation of the pinky finger up to the first knuckle.",0
An employee was using a hopper to throw trash in an outside dumpster. The employee moved a lever on the trash hopper and the hopper fell back onto his left hand and amputated his index finger.,1
"An employee was trying to hook a pallet that had stopped on the conveyor belt when the long hook tripped the sensor for the automatic shuttle car. The employee was pinched between the shuttle car and the racking system, resulting in surgery for lacerations on both legs.",1
"An employee was stacking product into the cradle of an automated saw when the employee's fingertip came into contact with the saw, resulting in an amputation.",1
An employee's left middle finger was caught between a slide and a roller bar. The fingertip was amputated.,0
"An employee was installing an adapter on a lathe. While attempting to loosen a retaining collar from the existing shaft setup, his left ring finger was momentarily pinched between the retaining collar and the machine frame, resulting in a partial amputation on his left ring finger.",0
An employee was transporting a 150-pound part on a cart. The part and the cart shifted and fractured the employee's lower back.,1
An employee was working aloft pruning a live oak tree when his pole saw began to fall. The employee reached for the pole saw handle but the pole slipped through his hand and the blade cut his left hand.,1
An employee was attempting to bleed off a hydraulic cylinder on a diecast mold. Their hand was placed on the side where the hydraulic cylinder was hooked to when it lowered and amputated three fingers.,1
An employee was installing a beam from an aerial lift. The lift swung and his head struck another beam. He suffered a head injury and a gash under his eye.,1
"On 12/4/2020, an employee was oiling a repack machine. She sustained a laceration to the right index fingertip.",1
"An employee was installing conduit underneath electrical switch gear when an arc flash occurred, resulting in first degree burns to his face and second degree burns to his hands and wrists. The switch box's shielding was removed at the time.",1
"An employee was testing and electric fan after changing the motor when the propeller made contact with the employee's left hand, resulting in a partial amputation of three fingers.",0
"An employee was in an aerial bucket clearing branches. A 70-pound branch hung up in the tree after being cut, then fell and struck the employee in the back and neck. The employee suffered a broken scapula and three broken vertebrae.",1
"An employee was working on a generator. His right hand came into contact with a rotary blade, which caused multiple lacerations and two broken bones in the back of the hand. He was hospitalized, requiring surgery.",1
An employee was getting ready to charge a environmental control unit with refrigerant. Refrigerant spilled on his hand and caused burns.,1
"An employee was cleaning the deep fryer when she slipped and spilled hot grease on her body. She sustained first and second degree burns on her foot, leg, and arm.",1
"On December 5, 2020, an employee was on the wash pad, securing a piece of equipment to prevent it from rolling. The employee's left hand was caught between the rolling equipment and the securing device cable. The employee sustained a fractured ring finger and an avulsion to the middle finger requiring hospitalization and surgery.",1
"On 12/5/2020, an employee was cleaning a patio when her feet got caught in a water hose, causing her to fall and suffer an L2 vertebral compression fracture in her back.",1
"While working in the maintenance shop, an employee's jacket caught the spout of a bottle of chemical floor stripper, spilling the chemical on his pants. Later that evening the employee was hospitalized with chemical burns to the leg.",1
"An employee was cleaning an impression plate. His thumb got caught in a roller, resulting in a fingertip amputation.",0
An employee slipped while cleaning fryer equipment and her hand went into the hot oil. A hose came unattached and sprayed hot oil onto her back. She suffered burns to the hand and her back.,1
An employee was repairing a garage door in a warehouse. The cable released and amputated the tip of the employee's left index finger.,1
An employee fell off a hydraulic lift while unloading trash containers. He suffered a broken hip.,1
"An employee working in the kitchen turned the corner, tripped over metal floor grating, and fell to the floor. The employee sustained a fractured hip.",1
"An employee was driving a double pallet jack when he struck his head on a racking system, resulting in a broken nose and jaw. The employee was hospitalized.",1
An employee was cutting frozen meat when the meat slipped out of their hand and the tips of their middle and index fingers were amputated by the band saw.,0
An employee's right hand was caught when an A-frame folded down into a horizontal position. The hand was broken and lacerated.,1
"An employee was using a 2,500-psi pressure washer. Water from the washer severely lacerated the employee's hand. The employee was hospitalized, requiring surgery.",1
"An employee was working on a ladder approximately six feet above the floor to install window trim. The employee fell from the ladder, resulting in hospitalization for a concussion.",1
"While two employees were preparing a 40-inch pipe support for replacement, one of the clamps holding the pipe rotated, crushing an employee's fingers between the clamp and the pipe. The employee suffered a crushed right hand, and his right middle fingertip had to be surgically amputated.",1
"An employee was clearing onions from the ""brooming section"" of a machine when their arm was caught in a roller and/or chain and sprocket and amputated.",1
"An employee was installing a firewall section. Two framed walls fell and struck the employee, causing back trauma.",1
"On 12/7/2020, an employee was pushing a die out of a hydraulic press when their fingers were smashed between the die they were pushing and a stationary plate on the press frame, resulting in a partial amputation of two fingertips. The machine was locked out at the time of the incident.",0
"An employee was climbing a ladder to access a gutter downspout when the ladder slipped out from underneath him, causing him to fall approximately six feet and resulting in an injured left wrist.",1
"An employee was trying to release the mechanical hold down for a dock plate while a forklift lifted the plate up so that the employee could access the area. When the hold down was released, the forklift moved from under the dock plate, allowing it to fall onto employee. The employee suffered two broken ribs, a laceration to his liver, and injury to his diaphragm.",1
"An employee tripped over a box in an office and fell to the floor, suffering a broken femur.",1
"An employee was reaching into a machine to adjust rollers. The machine cycled on and pulled the employee's right hand into the rollers, causing the amputation of three fingers.",1
"A corrections officer was unlocking cell doors in a housing unit when an inmate attacked him with a 14-inch homemade metal weapon. The officer was struck in the neck and face area, suffering wounds on the left side of the neck and the left cheek.",1
"An employee was cleaning a large pot used for mixing compounds for coating shell work when his left pinky finger was struck by a moving part that rotates inside the pot, resulting in a partial amputation of the pinky fingertip.",0
"An employee was doing maintenance work on a press machine. The machine was homed so that the employee could clear a piece of copper from the machine's die; the die closed and amputated the employee's left ring finger, as well as damaging his middle and index fingers and his thumb.",1
"An employee was pulling a showing frame off the top of a stack of showing frames. The frames were stacked 10 to 12 high and weighed 50 to 60 lbs. each. As he pulled and turned with the top showing frame, the stack fell over and struck his left hip. The employee sustained a fractured hip.",1
"An employee was pushing on a tree while it was being cut with a chainsaw. The chainsaw went through the tree and struck the employee in the left arm and chin, lacerating both. The employee was hospitalized.",1
"An employee was adjusting the placement of a pallet of freight. The employee's left little finger was crushed between two pallets, causing a partial amputation to the fingertip.",1
A tractor trailer was backing up to a dock hook when it struck an employee and pinned him against the dock plate on the dock door. The employee suffered a broken pelvis and back.,1
"An employee stepped out of a security guard shack and fell down stairs, landing on their left side. The employee suffered pain in the left leg and hip.",1
"An employee was servicing an oil burner when it backfired, causing a flash fire that resulted in severe burns to the employee's body.",1
"An employee was climbing a wall form to install a bolt when he fell approximately 5 feet, resulting in a left leg fracture.",1
An employee was walking into a patient's room when she fell and hit her head on the door. The employee sustained a laceration and hematoma to the forehead.,1
"An employee was carrying a five-gallon bucket of water when he tripped on a doorway, resulting in a broken ankle.",1
"On 12/7/20, an employee was in the office opening mail and moving boxes. When moving a box of copy paper, the employee pulled muscles in her back.",1
"An employee was communicating with the driver of a construction vehicle when the vehicle struck the employee, pulling him beneath the vehicle's tracks and resulting in broken ribs, a broken pelvis, and multiple fractures to both legs.",1
An employee fell through a skylight and landed on the floor 20 feet below. The employee sustained a head injury.,1
"An employee fell down the stairs, resulting in surgery for a torn knee ligament.",1
"An employee was going through training on loading the truck. While strapping down the load, the strap didn't go all the way over the load. The employee stepped up on a tire to reach the strap and fell to the ground. The employee sustained a fracture to the upper right arm that required surgery and hospitalization.",1
An employee was tightening a part on a foil slitting machine. The machine caught the employee's right middle finger and amputated the fingertip.,0
"While using a press machine to cut an object, a temporary employee's thumb got stuck between the object and the blade, resulting in an amputation of the tip of their left thumb.",0
"An employee was extending a dock plate when it failed to extend properly. The employee was investigating the locking mechanism under the plate when the plate extended suddenly, amputating his left middle fingertip.",0
"An employee slipped on ice while walking out of a foundry, falling to the ground and suffering a broken humerus. The employee was hospitalized.",1
An employee was stepping from a barge to a pier when a tendon tore in his right knee.,1
An employee was performing initial setup of a circular saw when the blade amputated his right middle finger. The saw was not guarded at the time.,0
"On December 8, 2020, an employee exited from the passenger side of the company truck that was parked on the side of the road and walked around the front of the vehicle. As he walked past the truck, he was struck by an oncoming vehicle trying to pass, resulting in a broken left leg.",1
An employee was repairing a portable air compressor when the compressor started and the fan blade amputated the employee's left pinky finger.,0
"An employee was helping a mechanic troubleshoot a dust collector. While attempting to clear a blockage, the employee's right hand came into contact with rotating machinery within the dust collector, resulting in an amputation of the fingertips on their middle and index fingers.",0
A lineman was ascending a pole when his gaff penetrated the conduit and then reached the lead sheathing of the live conductor. This resulted in an electrical arc flash. The lineman was hospitalized with electrical burns to both knees.,1
"An employee was setting up a brush making machine. The drill stuck in the table. When the employee grabbed the drill shroud, the drill bit came free and stored energy in the drill spindle arm cause the drill shroud to rise quickly. The employee's left middle fingertip was compressed between the drill shroud and the base of the drill spindle housing. The fingertip was amputated.",0
"A high-pressure concrete hose disconnected and struck an employee, injuring the employee's lower abdomen.",1
An employee was walking off of an anti-fatigue mat in the retail area when she lost balance and fell on the floor breaking a leg.,1
"An employee was dumping a waste container that was latched to a truck when the latch came undone. The employee tried to re-latch the container when their fingertips were caught between the latch and the truck, resulting in an amputation of the middle and ring fingertips.",0
"Two employees were moving a 6-foot by 3-foot metal-framed table out of a shipping container. When the table was halfway through the doorway, it flipped over and one of its legs struck and injured one of the employees.",1
"An employee was on an A-frame ladder installing a recessed, florescent light fixture. The employee's hand contacted an exposed, uninsulated wire, resulting in electric shock, and subsequent fall from the ladder. The employee was hospitalized with multiple fractures.",1
An employee was unjamming a conveyor line when his hand was caught between a chain and a roller. He suffered a broken finger and soft tissue damage.,1
"On December 8, 2020, an employee fell approximately ten feet from the scaffold end frame while installing metal siding on a new commercial building. The employee sustained a fracture to his right elbow and head injury requiring hospitalization.",1
An employee was installing a wooden truss when the truss slipped from his grasp and pinned his right little finger causing a fracture. The injury required surgical amputation of the finger.,0
"An employee was helping guide a pallet jack being moved by a crane. The pallet jack was lowered onto the employee's left index finger, causing a partial amputation (all of the fingernail and bone at the fingertip).",0
"An employee was removing scrap from a loader bucket. While the employee was reaching into the bucket, the loader's claw attachment came down and caught the employee, breaking the employee's tibia.",1
"An employee was cutting wood with a chop saw. As the employee fed wood into the saw, the blade caught the tips of their left index and middle fingers. The employee suffered soft-tissue amputations to both fingertips.",1
"An employee was removing a roof panel when the panel gave way and the employee fell approximately 14 feet to the concrete below, resulting in a fractured right leg and left orbital.",1
"A doorman was escorting a customer out the door when a fight broke out between the two. The doorman suffered eight broken ribs, a punctured lung, and bruised kidneys.",1
"An employee was assembling a streetlight when one of the fingers on his left hand got tangled with the pole rope, resulting in a fingertip amputation.",1
"An employee fell from the top of a ladder to the ground, suffering a broken left leg.",1
"An employee was exiting his truck when his left knee buckled, causing him to fall to the ground and resulting in hospitalization for a left hip fracture.",1
"An employee was pressure-testing a valve. The air hose leading to the valve had a leak; when the employee tried to tighten it, the hose broke under pressure and struck the employee, breaking his arm and lacerating his stomach. He was hospitalized.",1
"On December 8, 2020, a lineman was in the bucket of an aerial lift, using a voltmeter to check the amp readings on the center phase of a power line. The leads came off the voltmeter and touched the bottom phase of the power line. The resulting arc flash caused first-degree burns to the employee's face. He was hospitalized.",1
"An employee was adjusting a shroud on a conveyor during line operation when a protrusion on the conveyor belt caught on his glove, causing his right hand to pull toward the conveyor snub roller and resulting in an amputation of his index finger.",1
"Two employees were placing steel on a die press when the machine cycled and one of the employee's hands were crushed by the 4,000-pound press, resulting in crushed thumbs and index fingers.",1
An employee suffered a muscle strain to the lower/mid-back while performing copy and print services in a store.,1
"Employees were installing steel crane rails and rigging the rails while they were still on the ground. As they began to bring the crane up, there was still slack in the rigging and a rail rolled onto one employee's ankle crushing it.",1
"An employee was loading boxes on a conveyor belt for a robotic palletizer when several boxes fell off of the conveyor, causing the employee to trip and fall. The employee suffered a fractured left hip.",1
"On 12/08/2020, at 12:30 p.m., an employee was using a knockout machine when his right index finger slipped between the machine's hammer and its casting, resulting in a fingertip amputation.",0
"An employee was building scaffolding on a floating drydock. A plank kicked up when he stepped on it, and he fell 8 feet 4 inches to the concrete surface. He suffered fractures to the face and spine.",1
"An employee was unloading a large package from a trailer onto an extendable conveyor belt. He glove was caught in a pinch point on the belt and pulled in, causing fractures and lacerations to his right middle and ring fingers.",1
"An employee was on the metal roof of a house, preparing to cut a tree limb away from electrical service lines. He slipped and fell to the ground about 10 feet below, suffering an injury to the left shoulder and pelvic area.",1
"An employee fell from a striper truck. The employee's head struck the pavement, causing head trauma.",1
"An employee tripped on a step at a loading dock and fell, suffering a broken femur.",1
An employee was driving a forklift through plastic curtains. The plastic caught on the frame of the forklift and caused the frame to fall onto the employee's head.,1
"An employee was preparing a plastic part for the oven when their hand got caught between the plastic part and a clamp, resulting in an amputation of their right thumb tip.",0
"An employee was conducting belt maintenance, trying to walk a belt off a sheave. The belt caught and amputated the employee's left index fingertip.",0
An employee was removing chicken from a mixing machine and amputated his index and middle fingers.,0
"An employee slipped on water that had leaked from a dishwasher onto the floor. The employee fell to the floor and sustained a fractured right tibia and fibula, requiring hospitalization and surgery.",1
"An employee was driving a pin into the track of an excavator when the pin chipped and a fragment hit and penetrated the employee's leg, requiring hospitalization.",1
"An employee was making a delivery when they slipped and fell off a lift gate, resulting in a head injury.",1
"An employee tripped over truck tire chock at the edge of a dry dock. The employee fell to the dock floor, suffering a broken forearm, collarbone, and ribs, all on the left side.",1
"On 12/9/2020, at 6:35 PM, an operator was performing a routine check of a boiler plant and noticed standing hot water that indicated a problem with an aerator tank's condensation pit. The employee and his supervisor made the decision to reset the sump pump's ground fault circuit interrupter. While exiting the condensation pit, the employee slipped off a pipe and fell into the standing hot water, resulting in hospitalization due to burns on his lower legs.",1
"An employee was changing a truck brake drum. The jack gave way, and the truck fell and broke the employee's ribs and pelvis.",1
"On December 9, 2020, an employee was using an electric circular saw to cut wooden 2-by-4s. The blade stopped moving. The employee backed the blade up and was moving the wood when the saw turned on and amputated his left middle finger at the nail (with bone loss).",0
"An employee was changing hoses when he was sprayed by liquid butane, resulting in cold burns.",1
"An employee was working on a line when a seat fixture was raised up while another seat fixture was lowered down, causing her finger to be pinched between the top and bottom seat fixtures. Her left pinky fingertip was amputated.",0
An employee was working at a bale breaker when one of two chains on the right side of the machine popped up. He was trying to put it back on when his left hand was caught and injured between a chain and a sprocket. The machine was not guarded and was running at the time.,1
"An employee fell from a truck, striking the pavement or a guardrail and suffering a broken left wrist.",1
"On December 9, 2020, an employee was operating a printing press and was trying to tighten a cap bolt that holds the cylinders in place on the back side of the press near a sprocket wheel and chain. His shirt sleeve became caught in the nip point of the sprocket wheel and chain and his right forearm was pulled into the machine resulting in a laceration to the lower right forearm.",1
An employee fell while moving from a ladder to a roof. The employee landed on another roof 10-12 feet below and suffered a hand laceration and five broken ribs.,1
"An employee was working from a ladder trying to fix a roll-up door when he slipped, falling approximately nine to 10 feet and sustaining two broken ribs and a broken elbow.",1
An employee climbed into position at the top of a pole to attach a static wire to the static bar at the top of the pole when the employee received an electrical shock due to induced voltage from an adjacent transmission line.,1
An employee was bringing a forklift back to its charging station when the employee's foot was caught between the forklift and a floor bracket intended to prevent forklifts from damaging chargers. The employee suffered lacerations to his second and third toes and possible broken toes.,1
"On December 9, 2020, an employee was getting a battery out of a straight truck. The employee slipped and fell off the truck to the ground, suffering a broken left arm. The employee was hospitalized.",1
"An employee was performing maintenance on a napkin folding machine that included a bandsaw blade. When the employee pulled open the upper band wheel guard using their right hand, the employee's gloved fingers contacted the stationary bandsaw blade. The employee suffered a right middle fingertip amputation and a laceration requiring stitches to the right ring finger. The machine was not locked out and tagged out at the time.",0
"An employee tripped on a step stool and fell to the floor, suffering a broken hip.",1
"An employee was cleaning a gizzard machine. As he was trying to retrieve his scouring pad from the machine, the peeler rollers pinched his right index fingertip. He suffered an amputation to the fingertip.",0
"An employee was rotating a transmission that was secured to a stand when his right hand was pinched between the transmission and the wall, resulting in a broken index finger and severely lacerated pinky finger that required surgery.",1
"An employee was moving a punch press tool from its storage location onto an electric die cart when the press tool fell on the employee's finger, resulting in an amputation of the left ring fingertip above the top knuckle.",1
"An employee slipped on a wet/waxed floor, falling and suffering a broken right ankle that required surgery.",1
An employee was installing new batteries in an uninterruptible power supply. An arc flash burned the employee's hands.,1
An employee walked into a glass door and suffered a nose injury. He was hospitalized.,1
"An employee was returning to their work truck when they were pushed from behind, and fell down a flight of stairs. The employee sustained a broken left tibia.",1
An employee was cutting meat on a bandsaw. His hand slipped and his right middle finger was partially amputated by the blade.,0
An employee tripped over a pallet while carrying a box and fell to the floor. The employee sustained a fractured upper left arm.,1
An employee was cleaning a hopper when an extruding screw caught the tip of his right index finger. The fingertip was amputated.,0
"An employee was delivering packages. As she stepped off the back of the truck, she slipped and fell to the ground resulting in injury to her tibia and kneecap.",1
"Two employees were installing the port rudder into a 58-foot marine vessel. The vessel was suspended in the hoist straps of a marine travel lift. The employees were supporting the rudder vertically under the vessel when the lift dropped the stern of the vessel approximately 12 inches. The rudder became tightly wedged between the bottom of the vessel and the gravel ground. One of the employees had their fingers crushed between the rudder and the ground. The injured employee's left index finger was amputated and the left middle finger was severely injured, but remained attached.",0
"An employee was driving a pallet jack when it struck another, parked pallet jack. The employee suffered two fractures to the left tibia.",1
"An employee was conducting preventive maintenance on a locked-out fryer exhaust on a roof. Airflow started to move the fan blades, which caused the belt to move. The employee's glove and index finger were caught by the belt and pulled into the pulley, causing an amputation to the finger.",1
"While putting mail in a mailbox, an employee tripped on an uneven surface and fell to the sidewalk, suffering a broken elbow.",1
"An employee was placing signs on a roof. The roof collapsed and the employee fell through it to the ground, suffering a back injury.",1
"An employee was replacing a motor on a juice line. Beet juice burned the employee's right side, specifically the arm, hand, ear, neck, and shoulder.",1
An employee had been moving an anchor from one point to the next. The employee fell from the roof to the ground and sustained a fractured pelvis.,1
"An employee was replacing caps on rebar around a concrete pour. The employee slipped on a 2x4 and fell onto a piece of uncapped rebar, suffering an abdominal injury.",1
"An employee was unloading a truck at a docking area. The employee's foot was caught under a pallet jack wheel, causing the employee to fall to the ground and suffer an injury to the left hip.",1
An employee was lighting a propane burner when a flash fire burned the employee's hands and face.,1
An employee was operating a pallet jack when it struck a guard rail. The employee's leg was crushed between the pallet jack and the guard rail resulting in lacerations and a fractured leg.,1
"An employee was walking out of a building on her way to a meeting when she tripped on an uneven sidewalk and fell, resulting in fractured wrists, a left facial laceration underneath her eye, and contusions of the elbow bilateral, right knee, and shoulder.",1
"An employee was on a ladder, working on a laundry press. The ladder slipped and the employee fell to the ground and suffered a broken right ankle.",1
"An employee was on a ladder removing a telecommunications line and lost his balance. The employee fell backward off the ladder, landing on the ground and fracturing his wrist.",1
An employee was on the ground by a railcar attempting to unplug an oil line to allow the oil to flow from the railcar to a tank in the facility. Oil splashed out of the top of the railcar and landed on the employee causing burns to the top of the employee's shoulders.,1
"An employee had just finished dumping a rear load container into the back of a rear load garbage truck. While retracting the winch cable and securing it to the truck, the employee's hand was caught between the cable and the grab handle. The employee sustained a crushed right hand and was hospitalized. The middle finger required surgical amputation.",1
An employee was repositioning a milling machine when his finger got caught between the milling machine and a fixed object. The fifth digit on his right hand was fractured at the knuckle.,1
An employee was trying to clear a jam on a crossover chain. The chain moved and caught his right little finger against a gearbox. The finger was amputated.,1
"An employee was hooking up an air line on a piece of equipment. A crane load struck the employee, who suffered multiple leg fractures.",1
"An employee fell off a forklift, landing on concrete and suffering a broken arm.",1
"An employee walked into a room to get supplies and stepped on a bed remote control that was on the floor. When she turned to get off the remote, it moved, causing her to fall to the floor. The employee sustained a fractured left femur.",1
An employee's finger was smashed by the end of a dock plate. She suffered an amputation to the finger.,0
An employee walked up to the top of the stairs and then stepped on crumbled pieces of landscaping rock on the landing between the stairs and the entrance. The employee lost his footing and fell to the pavement sustaining a broken hip.,1
"An employee was standing within proximity of the drilling pipes as the pipes were being tightened with a wrench and the bucket of a mini excavator. The wrench that was held in place by the excavator bucket slipped, causing the drill pipe to move uncontrollably and strike the employee in the head. The employee sustained a concussion and a cut/laceration.",1
"An employee was walking on a roof to get to their work location. A thin layer of ice or dew was on the roof at the time. The employee slid and fell through a skylight, landing 25 feet below on the concrete floor. The employee sustained fractures to the right leg and elbow.",1
"An employee was operating a punch press, loading a piece of sheet metal and placing a metal bracket near clamps (to protect the rubber seal of a door panel when a clamp comes down). The clamp came down and the bracket amputated the tip of his left thumb.",0
"An employee was on the roof of a one-story home, pushing solar cables through a junction box to another employee who was in the attic. The employee fell approximately 8 feet from the roof and was found lying on the ground. The employee suffered a back strain and dislocated disc. The employee was hospitalized and required surgery.",1
An employee was removing a piece of chicken from the halver machine and sustained an amputation to the left index fingertip under the nail.,0
An employee was clearing scrap on the guard of a radial arm saw. The saw blade caught his left hand and amputated his left little finger above the first knuckle.,0
An employee was on a line cutting chicken. His knife amputated the tip of his left index finger.,0
"An employee was cutting meat on a bandsaw. The saw cut his right index finger, causing an amputation.",1
"An employee was feeding lumber into a planer when a board got caught. As the employee attempted to remove the board, his left hand was caught in the planer resulting in multiple lacerations.",1
An employee was mooring a spill barge. As the employee was lifting the tow line from a bollard. The line came under tension and the employee's left ring finger was caught between it and the bollard. The fingertip was amputated.,1
An employee amputated their right index fingertip while cleaning a cutting machine.,0
"An employee fell while descending a ladder. He landed on the shop floor, suffering five broken ribs and a punctured lung.",1
"On December 11, 2020, an employee was emptying a kettle drain from a chocolate enrober machine when the machine caused an amputation to the employee's left index finger. The machine was running at the time.",1
"An employee was conducting a receipt check when the customer brandished a firearm and discharged the firearm multiple times, striking the employee in the arm and torso.",1
An employee was using a band saw to cut bones when the blade amputated his left index finger under the knuckle.,1
An employee was unloading product from a truck. The employee's right index finger was caught between a can of green beans and a metal rail. The fingertip was amputated.,1
"On December 10, 2020, an employee fell while stepping from a hatch cover to a walkway on the forward end of a bay on a ship. He suffered left leg pain and was hospitalized.",1
"A temporary employee was moving a railcar caddy into a building. The employee was pinned between the caddy and an elevated platform, suffering a broken collarbone and ribs.",1
"An employee was performing rework at the end of a poultry line. A skinner stopped running, causing breast meat to pile up on a belt. The employee was trying to divert the product off the belt when a rework hook snagged her glove and began to pull her down the line. Her right hand was lacerated.",1
An employee was making a delivery to a housing complex when he was caught in the crossfire from a nearby gun violence incident. He suffered a gunshot wound to the left shoulder.,1
"After kneeling down to clean in a deli department, an employee struck his head on the corner of a table while standing up. He was hospitalized, undergoing multiple brain surgeries.",1
An employee was walking to get a cart when he tripped over a cart guide rail and fell fracturing his right femur.,1
Two employees were offloading product for a residential delivery. They were using a manual pallet jack to move a load onto the lift gate of a truck when the jack and the load fell to the ground and landed on one employee's hand. The employee suffered a partial amputation to the thumb.,1
A security guard was directing an ambulance that was backing up from the facility. He stepped out to the main street and was struck by an incoming car. The security guard's legs and shoulders were fractured.,1
Three employees were moving a metal container full of metal parts. One employee had two fingers pinched by the corner of the container. The right middle fingertip was amputated.,0
"An employee was climbing down a ship's ladder when he slipped and fell 15 feet to the lower level, fracturing both of his legs and resulting in hospitalization.",1
"An employee fell while entering a break room, landing on the floor and suffering fractures to the right femur and kneecap and the right little finger, as well as contusions to the right hand, shoulder, and cheek.",1
"After making a bale of cardboard and plastic, an employee was trying to release the chains that helped the baler extract the bale. His right index finger was caught between the chain and the machine and amputated.",1
"An employee was installing metal sheeting on the roof of a new building. He fell through a skylight, landing on wooden pallets, transformers, and/or the concrete floor 18-22 feet below. The employee sustained a fractured pelvis and broken ribs.",1
"An employee was working at the saturation machine. While he was manipulating webbing material, the nip rollers caught his left hand, breaking three fingers and lacerating his skin.",1
"On December 12, 2020, an employee was preparing a box at the second deck. The employee fell out of an opening to the concrete floor below, suffering a shattered wrist, a broken rib, and a hip contusion, all on the right side.",1
An employee was cleaning a 12-kilovolt switch gear when there was an arc flash and a fire. The employee suffered electrical burns and was hospitalized.,1
"An employee was erecting a cell tower. The employee was moving from a tower leg to a cross-brace when he fell to the ground about 40 feet below, suffering leg and pelvis fractures and a punctured lung.",1
"On December 12, 2020, an employee tripped over a cement block and fell onto a door manifold that was sticking up about two inches. The employee was hospitalized with a ruptured spleen.",1
An employee was walking on the apron of the sidewalk when their sandal got caught causing the employee to trip. The employee sustained a broken foot.,1
An employee was using a rag to clean a chromate roller as it was pulling a coil of cold rolled steel. His hand was pulled into a pinch point between two rollers. The employee sustained amputations to fingers on his right hand.,0
"An employee was standing on a stepladder while replacing an inclined conveyor belt. He fell from the ladder to the concrete floor, suffering a broken pelvis.",1
A security guard was punched in the head by a patient. He fell to the ground and hit his head again. He suffered a brain injury and brain bleeding and was hospitalized.,1
An employee was walking in front of his electric pallet jack when it struck a loaded pallet. His feet were pinched between the jack and the pallet.,1
"On December 13, 2020, a press operator was making adjustments to the direction of a fan to cool the frames on the thermoforming press. The employee's left middle finger contacted the moving fan blades resulting in  amputation to the first digit.",0
The injured employee was standing next to a step ladder. Employee 2 was on the ladder when he lost balance and fell on top of the injured employee. The injured employee sustained injuries to the neck and shoulder and possibly to the head.,1
"An employee was changing a press brake die. The die came down and caught the employee's left ring finger against the block, crushing it.",1
An employee suffered an allergic reaction to a work-required flu vaccine. The employee was hospitalized.,1
An employee was grinding metal in a welding area. The grinding wheel caught his left thumb and amputated the tip.,1
A temporary employee was walking into the building when he slipped on a fire proofing spray that had been sprayed on the floor. He fell to the concrete and broke his right femur. The employee was hospitalized and had surgery.,1
"An employee was running the hot melt machine and noticed a rag had slipped into the laminating roller. While grabbing the rag, the employee's arm was pulled into the roller. The employee was hospitalized for soft tissue damage and swelling of the arm.",1
An employee was bending a part in a press brake when their thumb got caught between the part and the machine. The tip of the right thumb was amputated.,1
An employee was in a company vehicle (SUV) that was driving into the cargo yard when her vehicle was struck by another employee-driven SUV resulting in a fractured right femur.,1
"On December 14, 2020, an employee was building wire cages in a warehouse when a board or beam struck him and knocked him to the ground. The next day he felt pain and was hospitalized for a lacerated spleen.",1
"An employee was standing at the edge of a roof when they fell five stories into a dumpster below, resulting in a broken wrist and broken ribs.",1
"An employee had been working on an HVAC system located on a roof. The employee tripped and fell 8 feet from the roof. He sustained fractures to the right shoulder, pelvis, and right femur.",1
"An employee slipped on an icy sidewalk on the way into a building. She fell, landing on the right side of her body and suffering contusions to the head and face causing right-side head pain, headache, right cheek pain with swelling, right jaw pain, a nosebleed, an abrasion to the nose, and right eye redness; she also suffered right knee pain with swelling.",1
"An employee fell while descending from the deck of a crane, landing on the ground and suffering broken vertebrae.",1
An employee was on a manlift welding a flange on a gas supply line. There was residual gas in the pipe and the pipe exploded. The employee sustained burns to approximately six percent of his body.,1
"An employee was performing opening duties when her foot got caught on a ledge and she fell on her hip, fracturing it.",1
"An employee was manually turning a section of a trailer on a rotating device. As the employee reached to slow the section, their left ring finger was caught in the pinch point of the rotator and trailer section. The finger was amputated between the fingernail and first joint.",0
An employee was picking up a 32-pound metal plate when it slipped and pinched the employee's finger against a shelf. The employee suffered a partial fingertip amputation and a fingertip fracture.,0
An employee was stacking money in her cash bus when its metal lid slammed down on her fingers. She suffered fractures to her right middle and ring fingers.,1
An employee was cleaning a conveyor. While removing dough his glove was caught in the conveyor resulting in amputation of his right index finger.,0
"An employee was painting when he tripped and fell 11 inches, hitting his head on a skid steer. He suffered a head injury and was hospitalized.",1
"Shortly after 7:35 p.m. on December 14, 2020, an employee was trying to fix an outgoing conveyor belt on a line. His jacket was caught in an adjacent conveyor, which pulled in his right arm and crushed it. He was hospitalized, undergoing surgery for a broken forearm.",1
"An employee was walking to his vehicle when he slipped on a discharge hose and fell, suffering a spiral fracture to his right tibia.",1
"On December 14, 2020, an employee was manually rotating a die board cylinder. The prybar he was using to rotate the cylinder came down and pinched his left hand against the anvil blanket around another, lower cylinder. His left index fingertip was amputated.",0
An employee slipped while taking a die out of a sign blank machine. The die came down and severed his right little fingertip.,1
"An employee was attempting to retrieve a marker pole near an excavation when a road plate that had been standing vertically fell over onto the employee, pinning the employee to the ground. The employee suffered broken ribs and a broken pelvis and was hospitalized.",1
An employee was inspecting a pulp hoist. The hoist was activated and the employee's right index finger was crushed between the lower stop of the hoist and the hoist case itself. The fingertip was partially amputated.,0
"An employee was trying to remove a piece of wood that was creating a jam at the end of a chain conveyor. His fingers were caught in a pinch point, causing amputations to his right ring and little fingers at the nailbed.",0
An employee tripped on an anti-fatigue mat that was in front of his machine. He fell to the floor and injured his hip.,1
An employee had parked his electric forklift next to a parked semi-trailer and dismounted the forklift to count stock. He returned to the forklift and as he was climbing up the forklift the accelerator was depressed and his legs were caught between the side of the trailer and the forklift. The employee was hospitalized with a laceration to the right calf and torn ligaments and a laceration to the left knee.,1
"An employee was taking packages out of a cart under a chute. As the employee turned to remove a package from the cart, another one came down the chute and struck the employee in the corner of the right eye, causing lacerations to the corner of the eye and just under the eye.",1
An employee was cutting material on a small table saw. The sawblade amputated his left middle finger at the knuckle. The machine was unguarded at the time.,1
"An employee was standing on the ground about 20 feet from where plywood was being pulled up to be installed for a trash chute. The plywood became loose from the chute above, began to fall, and was blown by the wind into a fence on the ground about 8-10 feet from the employee. This caused the plywood to flip over and roll toward the employee, lacerating and fracturing his face.",1
"An employee was inspecting concrete forms at a construction site when he slipped and fell onto one of the forms, resulting in a broken right leg.",1
An employee slipped on Vaseline on a store floor and fell. The employee suffered a broken hip and was hospitalized.,1
An employee was cutting insulation paper. The shear activated and amputated the employee's left middle fingertip.,0
"An employee was cutting metal electrical conduit with a pocket knife. The knife fell, severing the employee's right index finger at the first joint, above the nail.",0
"An employee fell while stepping off a ladder, suffering broken heels. She was hospitalized.",1
"An employee was installing fiber optic cable from a scissor lift. A forklift backed into the scissor lift, causing the employee to fall to the floor about 20 feet below and land head/face first. The employee suffered severe head trauma and broken bones.",1
"On December 15, 2020, at 5:00 PM, an employee was delivering packages when they twisted their ankle, lost their balance, and fell on the pavement, resulting in a broken knee.",1
"While walking across a warehouse roof to access a cable attachment, an employee fell through a skylight and landed on the concrete surface below. The employee sustained injuries to the head, chest, and hip. The injuries also included multiple broken bones.",1
An employee was using a dolly to unload goods from a truck. He slipped while coming down the ramp in the back of the truck. His right ankle and foot were broken in three places and his lower leg was broken.,1
"An employee was moving a 6,000-pound roll of copper with a crane. The roll fell out of the lifting device and lacerated the employee's right foot.",1
"An employee slipped on ice in a parking lot and fell, breaking two vertebrae in the lower back.",1
"On December 15, 2020, an employee was pulling a 40-inch handheld pallet jack into position for a forklift to pick it up. The forklift struck the employee as it backed up, breaking his right ankle. He was hospitalized.",1
Two employees were engaged in horseplay with an air hose when one of them suffered a compressed air injection injury.,1
An employee was troubleshooting a hydraulic leak on an aluminum die casting machine when the machine was turned on. The employee was caught in the machine and suffered fractures to the shoulder and ribs and was hospitalized.,1
"An employee had just stepped backward after pulling a pallet from a stack. A passing pallet jack caught his foot between its forks, and his body struck the machine. He suffered fractures to the left knee, left foot, and right ankle.",1
An employee was feeding a piece of material into a table saw. The sawblade amputated the employee's left index fingertip.,0
"An employee was traveling down a warehouse aisle on a motorized pallet jack. The pallet jack collided with another pallet jack traveling in the opposite direction. The employee jumped off just before the collision, and their foot made contact with the other pallet jack. The foot was broken in two places and the heel was crushed.",1
An employee was working from the back of a truck when he slipped and fell from a height no greater than 4 feet. He suffered a back compression fracture.,1
"An employee was trying to dislodge a workpiece that had fallen off a conveyor. The employee's right middle finger was caught in a chain and sprocket, and the fingertip was amputated.",0
"An employee was holding a clamp while cutting a piece of wood with a horizontal table router. The employee's right hand slid off the clamp and struck the router bit, which caused a partial amputation to the middle fingertip.",0
"On December 15, 2020, an employee was inspecting a palletizer machine and pallet feed when he slipped and his hands contacted the back side of the pallet lift (a stationary forklift) to break his fall. His left index finger was caught between the pallet's gear and the fork, resulting in a fracture and an amputation without bone loss. The employee was hospitalized.",1
An employee slipped and fell on oil in a back room. The employee landed on the floor and suffered a broken left hip. The employee was hospitalized.,1
"An employee was operating an uncoiler machine. He was inspecting the insert of the uncoiler when it caught his glove, pulling in his left hand. It sliced the thumb, causing an injury that required ten stitches and the insertion of a pin between the first and last joint.",1
An employee was pulling a kraft paper roll when a spindle crushed and amputated his right middle finger.,0
An employee was moving empty boxes to a garbage compactor. The employee was struck by a forklift and suffered bruises.,1
An employee developed a hernia while moving a patient.,1
"An employee was working on a scaffold 16 feet above the ground. They fell from the scaffold to the ground, suffering a broken hip and an injured ankle. The employee was hospitalized.",1
"An employee was pushing brush with a skid steer. A large tree branch broke, crashed through the windshield, and entered the cab, striking the employee in the abdomen. The employee suffered broken ribs and internal injuries that required surgery.",1
"Three employees were installing new pins on the right and left lift arms of a skid steer. The left pin was removed while work was being done on the right pin. When the pin was removed, the lift arm assembly slid forward and its cross-member pinned an employee's legs. The employee suffered a leg fracture.",1
"An employee was accompanying a quality inspector who was conducting an annual quality audit on the beverage can filler production area. The quality inspector asked to see a strainer located on the piping housing. The employee proceeded to remove the strainer from the piping line. While attempting to remove the strainer, the strainer ejected from the piping and struck the employee above the left eye. The employee sustained a concussion and a laceration above the left eye.",1
An employee was driving an electric tug when it struck a baggage cart. The employee suffered a broken rib and a possible punctured lung.,1
"An employee was moving an aluminum coil from a coil tilter. The coil fell, striking the employee's left leg. The employee suffered swelling to the leg.",1
An employee was changing a wheel/tire assembly. He was straightening a valve that had been pushed out of position when the tire slipped out of the clamp and pushed his hands into the studs. He suffered a laceration and fracture.,1
"An employee was drying in a tile roof when he slipped on paper and fell to the ground, suffering back injuries.",1
An employee was unloading a supersack of concrete ready-mix. A forklift amputated the employee's right thumb.,1
An employee was climbing a ladder with guard rails to access the rig floor. The ladder twisted to one side causing the employee to fall to the ground. The employee sustained displaced vertebrae in the neck and bruising and soreness.,1
"An employee was loading steel tubes onto a rack. A tube shifted and struck the employee's right hand, lacerating and breaking the little finger.",1
"An employee was putting up merchandise in a store's clothing department. A customer bumped into her and knocked her to the floor. She suffered injuries to her head, left wrist, and left leg and was hospitalized, undergoing surgery for a fractured pelvis and left femur.",1
An employee was driving a forklift with an attached personnel cage. The blades contacted a permanent railroad track sunk into the pavement; the forklift stopped abruptly and the employee struck the windshield and steering wheel.,1
An employee was walking down an outdoor staircase when he fell at the last step. He landed on hard pavement and hit his head. He was hospitalized.,1
"A driver was sitting in a garbage truck cab while the truck was checked for an air brake leak. The truck rolled over the chock at its rear wheel and began to roll down a slight incline in the parking lot. The driver jumped out of the cab, and the truck ran over his left foot and ankle (first the front steering tire, then the dual rear tires on the driver's side). The employee suffered a foot/ankle injury resulting in partial amputation and hospitalization.",1
"Employees were using a chain to lower a new electrical pole into a hole. When the pole stopped moving, an employee moved to remove the chain from around the pole. The pole slipped down further and trapped the employee's index finger against the chain. The finger was amputated.",0
"At about 4:15 p.m. on December 16, 2020, an employee suffered an electrical shock while working with a soaker sink in a meat department.",1
"An employee was in front of a cart, helping to steer it as it was pushed from behind. Her right heel was caught under the lip of the cart and she fell to the floor, suffering a broken left hip.",1
"An employee had been installing low-voltage wiring. The employee fell through the roof and landed on the ground 20 feet below, sustaining multiple bone fractures.",1
"An employee was working on a trailer door and its spring. The spring broke loose and hit him in the right front side of the head. He then fell out of the trailer, landing on his head. He suffered a skull fracture and head swelling, and his right eye swelled shut.",1
"An employee was setting up a bending machine to bend copper tubing. The employee's right thumb was caught in a clamp, causing a partial amputation to the top of the thumb.",0
An employee was installing pylons on a beach. A pylon was taken by the wind and struck the employee.,1
An employee was adjusting the forks on a boom forklift. The fork attachment fell and fractured his right arm and hand.,1
An employee was operating a punch machine when the die amputated the tip of the employee's left index finger.,1
"An employee fell from a ladder to the floor inside a store that was being demolished. He suffered a head laceration, concussion, and a brain bleed.",1
"An employee slipped and fell on ice, suffering a head injury.",1
"An employee fell while climbing down from the back of a box truck, landing on the ground and suffering five broken ribs. The employee was hospitalized.",1
"An employee slipped on a patch of ice while stepping out of a delivery vehicle. She suffered a broken ankle and was hospitalized, requiring surgery.",1
A letter carrier was exiting their vehicle to begin deliveries when they slipped on black ice and fell in the parking lot. The employee sustained a broken ankle.,1
"An employee was assisting with offloading metal materials from a truck, when the load slid off the truck bed and fractured his foot.",1
"An employee  was carrying a metal part in his hands when he slipped and fell on a damp floor. His left little finger was crushed between the part and a metal tool basket nearby, resulting in a partial amputation to the finger.",0
"An employee was repairing a gas tube heater from a 15-foot ladder leaning against the raised forks of a forklift. The ladder slipped out from under him and he fell about 10 feet, suffering a spine injury and a head wound that required stitches.",1
"An employee was repairing a chain conveyor. The conveyor was turned on, and the chain and sprocket lacerated the tip of the employee's right index finger.",1
"An employee was operating a forklift when it caught on fire, burning the employee's arm.",1
"An employee was taking a window frame out of a shipping container. The frame fell onto his right leg, breaking it.",1
"An employee was in an attic repairing a plumbing leak. The employee fell through the ceiling and suffered fractures to the right tibia and fibula, as well as an injury to the left ankle.",1
An employee was cutting the straps on a brick pallet with a knife. The knife cut his left forearm and he was hospitalized.,1
"On December 17, 2020, an employee tripped and fell to the ground, suffering a broken left hip.",1
"An employee was removing a chicken part off a picking line. The line caught the employee's glove and pulled in his right arm, lacerating and breaking the lower arm.",1
"An employee was working inside a wind turbine when they slipped and fell approximately 57 feet off the ladder, striking a ladder support and resulting in two broken legs.",1
An employee was transporting steel casting flasks from one area on a finishing floor to another area using a forklift. One of the turnbuckle posts ripped from the flask causing the load to shift on the forks of the forklift. Both flasks then rolled off the forks and pinned the employee underneath them. This also caused the flask coverings to separate from the flasks and the employee was covered in approximately 700 degree sand from the chest down. The employee suffered burns to his legs and fractures to his pelvis.,1
"An employee was punched by another employee. He was hospitalized, suffering from a concussion and loss of teeth.",1
An employee was driving a vacuum truck when it tipped over past the edge of a driveway. The employee suffered two broken legs and a fingertip amputation.,1
"An employee was polishing material on a manual lathe. The lathe caught the employee's left wrist/hand, amputating the wrist/hand.",1
An employee was installing a crate divider when her finger got caught between the guide and the divider. She suffered an amputation to the left middle fingertip.,0
"An employee was about to unload a trailer. The employee opened the dock door and discovered that the last pallet on the end of the trailer was leaning and in jeopardy of falling over. He climbed over the pallet and lowered himself to the floor between it and the second row of pallets. As he came down, his right ankle twisted and struck the edge of the pallet. The ankle was lacerated and broken.",1
"An employee was hit by a car, fell, and suffered a fracture to the right wrist. She was hospitalized, requiring surgery.",1
"On December 17, 2020, an employee was standing on the fork of a forklift as it lowered a powered pallet jack. The jack tipped and the employee jumped to avoid being struck by it. He suffered a broken kneecap and an injury to the mid-leg.",1
"An employee was cleaning a former machine with a spatula. The machine came down and caught the employee's right arm and hand, causing fractures to both.",1
"An employee was cutting meat using a buster saw. The employee's fingers were caught between the blade and the guide, and the blade amputated three fingers.",0
"An employee was working under an assembly. The assembly line kept moving and the employee was struck by a product and pinned against the machine. The employee suffered broken ribs, a lacerated liver, and a punctured lung.",1
"While walking across the parking lot, an employee slipped on snow/ice and fell on the ground, fracturing their right hip.",1
"On December 17, 2020, a concrete finisher was helping dismantle a bollard when a skid steer's bucket detached from its mount and broke his lower right leg. He was hospitalized.",1
"An employee tripped and fell to a shop floor, suffering a broken hip.",1
"A mower machine caught a piece of wood, about 2 feet long and 3 inches wide, and threw it 90 feet backward. It struck an employee in the lower back, causing broken ribs, a vertebral fracture, and lacerations to the kidney and spleen.",1
"An employee was cleaning a kettle. A chain holding the kettle fell into the kettle, along with a nut that had held the chain in place. The employee was trying to retrieve the nut when his finger was caught in a pump hole. The pump amputated his fingertip.",0
An employee was working on a conveyor when he slipped and fell. His finger got stuck in the chain and the fingertip was amputated.,1
"An employee was using a leaf blower to dry frost and ice. He slipped and fell to the next roof below, landing on his back and suffering a collapsed lung, a cracked rib, and a head laceration.",1
"An employee was using a hammer drill to lay down a track. The hammer drill caught his left glove, pulled in his hand, and amputated the tip of his left ring finger.",0
"An employee was pulling an empty rack when he tripped and fell backwards, landing on the concrete floor and suffering a broken pelvis and right arm.",1
An employee slipped and fell in a parking lot. She suffered a spiral fracture to the tibial plateau.,1
An employee slipped on ice while delivering mail and suffered a broken right knee.,1
"An employee slipped on ice during a delivery and fell, suffering a broken rib and a collapsed lung.",1
"Two employees were changing a battery. As one of them moved a pallet jack to the battery, the other lifted the locking arm on the battery. The battery shifted, pinching the second employee's left thumb against the locking arm. The thumb was amputated.",0
"An employee was operating a fabric splitter. The employee's hand was caught and pulled into the uptake roll, causing the amputation of the arm at the shoulder.",0
"An employee was cleaning the inside of a van. The van's door closed on the employee's right index finger, amputating part of it.",1
"An employee slipped on ice in a parking lot, falling to the asphalt surface and suffering three broken ribs and a punctured lung.",1
"On December 18, 2020, an employee was struck by a forklift as it backed up. The employee suffered a compound fracture to the left leg and was hospitalized.",1
"An employee was dropping off an empty trailer. He was releasing the pin from the trailer when his lower back popped, causing worsening pain, then shortness of breath. He was hospitalized, suffering from bulging discs in his lower back.",1
"After getting out of her car, an employee slipped on black ice on a sidewalk, fell, and suffered a broken right kneecap. She was hospitalized.",1
An employee fell from a ladder while climbing down it. The employee struck the ground and suffered a concussion and a broken left arm.,1
"An employee was driving a powered industrial truck  when it struck a pillar. The employee was ejected and his head came into contact with the structure of the truck. He suffered a head injury and was hospitalized, requiring surgery.",1
"An employee was on a dock plate when the truck pulled away from the loading dock. The plate dropped down and the employee fell, landing 4 feet below and suffering a broken left femur.",1
"An employee was on a platform, removing a material jam from a conveyor belt. A turntable, moving back toward him, caught his lower left leg against the platform. The leg was pinched and fractured.",1
"An employee was on a metal roof, removing siding in preparation for installing foam insulation. The employee slid off the roof and fell to the ground 13 feet below, suffering a spine fracture.",1
An employee was helping to connect pipes. His right middle finger was caught and amputated between two pipes as they came together.,1
"On December 18, 2020, an employee was walking through a plant next to a conveyor. The employee's safety vest got caught in a rotating chain and sprocket that powered the conveyor. As he tried to free himself, his gloved left hand was pulled into the sprocket and his fingers were lacerated. He suffered amputations to the fingers.",1
"An employee was pulling a four-wheeled cart out of a truck. The cart's wheels got caught on a ramp running from the loading dock to the truck; the cart flipped over and the employee fell backward, landing on the floor and suffering hip socket fractures.",1
"Employees were lifting a variable frequency drive (VFD) container using a sit down forklift. The VFD container shifted, fell, and struck an employee's right leg/foot. The employee suffered a broken bone and a laceration.",1
"An employee slipped and fell in a parking lot, landing on the ground and suffering a broken leg.",1
"An employee was struck by a stolen car outside a gas station. The employee suffered a kidney laceration, broken ribs, and a brain bleed.",1
An employee was descending a catwalk. He lost his balance and his foot was wedged between the base of the catwalk and a machine. He suffered fractures to the right fibula and tibia and was hospitalized.,1
An employee clocked out and was walking to his car. He stepped down from the parking lot to the grass area to get to the side wall. He fell and hit his head on the concrete ground sustaining a concussion and a laceration on the forehead.,1
"An employee tripped and fell to the floor, suffering a broken arm.",1
"On December 19, 2020, an employee was scanning a parcel when she stepped back onto a pallet jack and suffered a broken right ankle.",1
"An employee was using a foot-operated saw. The employee's gloved right hand was pulled into the saw area, and the employee suffered an amputation to the thumb tip.",0
An employee fell off a dock while closing a trailer's rear door. His fibula was broken at the ankle.,1
"On December 19, 2020, an employee slipped on black ice in a driveway and fell, breaking her leg.",1
"An employee slipped on ice while making a grocery delivery to a residence, falling and suffering a broken foot.",1
"An employee was bleeding a chemical transfer line. Cresol sprayed out from the line, burning the employee.",1
An employee slipped while providing hand signals for an excavator. The employee fell to the ground and suffered a broken leg.,1
"An employee was inspecting the doghouse panels for the backsides of breakers in a doghouse. An arc flash burned both the employee's hands, causing a large cauterized laceration to the right hand. Both hands were amputated.",1
An employee was helping detect propane leaks. The employee developed carbon monoxide poisoning and was hospitalized.,1
"At 10:37 p.m. on December 19, 2020, an employee was greasing a drive train for the conveyor. The employee used a rag to remove excess grease and the rag got caught in the sprocket, pulling the employee's ring and middle fingers into the sprocket and causing an amputation injury.",1
"Two employees were processing a bale of mixed plastic bottles and other material for recycling. When the strand of wire was cut, the cut end whipped around and struck the outer edge of an employee's eye. The employee was hospitalized and underwent surgery.",1
"On December 19, 2020, an employee's fingers were caught in a press. The employee suffered an amputation.",1
"While walking in the lot, an employee slipped on ice and fell, hitting her head and sustaining a concussion.",1
"An employee was moving the shot position of a die cast machine with a crane. The chain broke and struck his arm, injuring it.",1
"While trying to give a customer their receipt, an employee slipped on ice or snow in the parking lot and fell. The employee sustained a broken bone in the face and bleeding in the brain.",1
"An employee was moving a rounder machine. The machine fell on one of the employee's left-hand fingers, causing the amputation of the fingertip.",1
"An employee was using a jack to lift a convertor dolly. The dolly fell off the jack and struck the employee's left hip, dislocating it.",1
"An employee was shot by their spouse while working in a kitchen, suffering two gunshot wounds to the lower leg. The employee was hospitalized.",1
"On 12/20/2020, at approximately 6:30 AM, employees where using a wooden box to hoist tools up to the third floor of the facility. The injured employee reached out a window on the third floor to unload the box and it tipped, pulling him out the window. The employee fell to the ground and was hospitalized with various broken bones including a fractured hip and back injuries.",1
An employee was cleaning a hopper when he fell in and suffered a broken left foot.,1
"An employee was servicing equipment, moving a stuck chunk of hot asphalt. The asphalt came out and burned his left hand.",1
"An employee was traveling on a reach truck in a distribution center. The truck lost traction on a wet floor and collided with a rack. The employee's left foot was crushed between the truck and the rack, and the employee was hospitalized.",1
"An employee was repairing a leak from a refrigerator. A 12-ounce refrigerant tank ruptured in the employee's right hand, breaking the index finger in front of the knuckle.",1
"An employee was vacuuming above a metal lab. The employee tripped and fell through a guardrail opening, landing 8-10 feet below and suffering possible fractures to the face, wrists, knees, and arms.",1
An employee was adjusting a crane line on a spool. The employee's left index fingertip was caught between the line and the spool and was amputated.,0
"On December 21, 2020, an employee was operating a headband cutter and amputated the tips of her left index finger and thumb.",0
"An employee was measuring natural gas levels in the vicinity of suspected damage to a natural gas line. An adjacent apartment building exploded and caught fire, and the employee suffered burns to the side of his face and his left hand. He was hospitalized.",1
"An employee was moving a stack of metal corners. The stack fell and trapped the employee's right little finger against the floor, amputating the fingertip.",0
An employee was moving packages across a roller conveyor system when his finger was pinched between the rollers and the package he was handling. This resulted in partial amputation of his right middle finger.,0
"An employee was standing on a platform about 7 feet from ground level, putting plastics into a machine. The employee slipped and fell from the platform, landing on the concrete floor. The employee was hospitalized with head and shoulder injuries.",1
"An employee developed a hernia while moving a 97-pound cylinder along a conveyor. The employee was hospitalized, requiring surgery.",1
"A employee was operating a jackhammer to break up concrete so a utility pole could be installed into the sidewalk. The jackhammer made contact with the employee's left foot, striking it near the two smallest toes just past the steel toe of the boot. The employee sustained fractures to the left foot/toes.",1
"An employee was trying to get out of an office chair. The employee's leg got caught under the leg of another chair in the area, causing the employee to fall and suffer a broken hip.",1
"An employee was using a hoist to lift tooling into a tooling box. The tooling fell onto the employee's left leg, breaking the lower leg.",1
"Two employees were replacing an autoclave seal. The seal was being lifted with a hoist when the connecting i-bolt came loose and the seal fell onto one employee's right hand. The employee suffered a severe crushing injury to the hand and fingers, with severe damage to the little finger.",1
An employee had been cleaning a machine. The employee's right hand got caught in a hydraulic gate resulting in fractures and lacerations to the wrist. A guard was not in place at the time.,1
"An employee slipped on spilled spaghetti and fell to the concrete floor, suffering a broken left hip. The employee was hospitalized.",1
"An employee was cutting trim material on a table saw when a piece of wood trim became bound up in the saw, causing his hand to slip and contact the saw blade. The employee suffered an amputation to the tip of his right pinky finger.",0
"At 11:00 a.m. on December 21, 2020, an employee was working inside a bakery freezer when her foot was caught in a cart. She fell and suffered a broken hip.",1
"An employee was walking through a locker room when their sleeve got caught on a door handle, resulting in a cut on their right forearm. The next day, the employee's arm was feeling numb.",1
An employee was using a screwdriver to attach a string to a vehicle. Her finger was caught in the string and the left middle fingertip was amputated.,0
"An employee slipped while coming out of a cooler, fell backwards, and hit the back of her head on the floor.",1
An employee was moving a test plug on the bed of a truck. The employee's right ring and middle fingers were caught between the plug and the truck bed; the right fingertip was smashed and the middle fingertip was amputated. The employee was hospitalized and underwent surgery.,1
"On 12/22/2020, an employee was coaching an advanced-level group of skiers. While demonstrating how to jump off a natural feature, the employee fell forward to the ground and sustained a fractured tibia that required surgery.",1
"A temporary employee operating a rebar bending machine inserted material into the machine and was moving his hand away from it when his glove got caught in the machine, resulting in a partial amputation of his pinky finger.",0
"An employee had landed a load of glass in an ""A""-style crate. The crane rigging caught on the bottom of the crate, causing it to tip over and land on the employee's left side and ankle. The employee's ankle was broken.",1
"A crew had just finished backfilling an excavation on a construction site and were putting lime on the soil. An employee slipped and tripped in mud and could not get out of the way of an excavator as it backed up. He suffered a broken left leg and was hospitalized, requiring surgery.",1
An employee was walking down the stairs at a patient's home and fell down the stairs breaking their right ankle.,1
An employee was driving a forklift through a doorway. The employee's left arm was caught between the forklift and a temporary plywood entrance resulting in a fractured arm.,1
An employee was delivering a package to a residential home when a dog came from the rear of the property and attacked the employee. The employee was hospitalized with bites to both arms and legs.,1
An employee fell while reaching for a package on the floor. He suffered a broken left hip.,1
"During assembly operations, a temporary employee was installing a chain on a sprocket when his hand got caught between the chain and a railing, resulting in an amputation of the left middle fingertip that was able to be reattached.",0
An employee suffered a fingertip amputation while removing a jammed board. The machine was guarded at the time.,0
"An employee slipped and fell to the floor, suffering a fracture to the tibia at the kneecap. The employee was hospitalized.",1
A mill operator tried to unstick rubber from the apron on a mill. His gloved hand was pulled into the mill machine. The employee was hospitalized with a compound fracture to the upper left arm.,1
"An employee was machining a steel roller on a manual lathe. The employee's hands came into contact with the roller, causing an amputation to the right index finger and a fracture to the left hand.",0
"An employee fell from an 8-foot A-frame ladder, landing on the floor and suffering fractures to the right leg and spine.",1
"An employee was rotating a C-hook lifting device when their fingertip was caught in the device and crushed, resulting in an amputation.",0
"An employee started up a shredder machine. A large wrench attached to the machine hit him in the right temple and shoulder, causing abrasions to both. He was hospitalized.",1
"A forklift operator dropped off a load of lumber onto a chain leading to a lumber stacker. The employee got off the forklift and pushed a control button next to the chain to push the lumber towards the stacker. As he was walking back to his forklift past the end of the chain, which is approximately 5 feet off the ground, 8 to 10 boards that were frozen together fell backward off the stack and landed on his right leg. The employee sustained broken bones in the lower right leg.",1
"An employee fell while stepping out of a truck, suffering a broken right hip.",1
An employee was repairing a forklift when his finger got caught in the pin housing of the forklift. The fingertip was amputated.,0
"An employee was touching up the paint on a stairway and preparing to put no-slip strips on the steps. While descending the stairs, the employee missed a step and fell down two steps, breaking her right wrist and hitting the back of her head on the floor, which resulted in a concussion.",1
"Employees were drilling using an auger. They hit rock around 1.5 feet and the injured employee turned around to let his helper know to drop a spoon. The injured employee's jacket sleeve got caught in the auger, pulling him into the auger and causing lacerations to the left shoulder and chest.",1
"An employee was cutting a steel bar with a bandsaw. The sawblade caught the employee's glove, causing a soft-tissue amputation to the left middle finger.",0
"An employee was working on an edger chain. While the edger was shut off, the employee reached to straighten out a board on it; the edger was turned on and the employee's glove was pulled into the chain. The employee suffered a partial amputation to the left middle fingertip.",0
An employee was removing tangled grass from farm equipment rollers when their arm was caught in a moving roller resulting in a broken arm and lacerations.,1
"At about 11:00 a.m. on December 22, 2020, an employee tripped over a parking block and fell in a parking lot. The employee suffered a broken right leg and was hospitalized.",1
"An employee was loading a flatbed truck with fabricated steel pipe. A pipe rolled onto the employee's finger, causing an amputation.",0
An employee was operating a bulldozer on a worksite when the bulldozer struck a rock which jolted the employee causing spinal pain. The pain increased until the employee lost all feeling in his legs. The employee was hospitalized with a herniated disc at L2-L3.,1
"An employee was removing scrap from a press. The employee's left index finger was caught in the die, which amputated the fingertip.",1
"An employee fell through a roof to a concrete floor, suffering broken vertebrae.",1
"An employee was bending rebar on a radius machine when their hand was caught in the machine, resulting in four pinched and broken fingers.",1
"The pulling unit crew was running rods in the hole from the derrick. The rig operator raised the rod string and began to lower the rods into the well. With the rod transfer still in place on the rod triple, the blocks were lowered, causing the chain holding the rod transfer to break. The rod transfer then fell and struck an employee, who was standing on the work floor, on the top frontal area of his hard hat resulting in the loss of an eye.",1
"An employee was leaving a building. The employee's finger got caught in the door and was injured. The employee was hospitalized, requiring surgery.",1
"An employee was operating an excavator when the roadway underneath the excavator collapsed, pinning the employee.",1
"An employee tripped on an air curtain striping while walking into the backroom to let a vendor into the store, resulting in hospitalization for a foot injury.",1
"An employee was walking into a facility. A strong gust of wind caused her to slip on ice on the ground and she fell, suffering a broken hip and arm.",1
An employee was cutting a heat exchanger with high-pressure water. The hose broke and the water cut a tendon in the employee's knee.,1
An employee was walking to their car at the end of their shift. The employee slipped and fell on black ice in the parking lot and sustained a broken left hip.,1
"On 12/23/2020, employees of Zone Safety LLC were setting up a temporary traffic control zone. As the injured employee was controlling traffic with hand signals and a hand-held paddle, the employee was struck by a moving motor vehicle resulting in multiple severe injuries. The employee was hospitalized.",1
"An employee on a pallet jack and an employee on a forklift collided at the entrance to a freezer. When the collision occurred, the pallet jack handle broke, causing the employee on the pallet jack to fall forward, where their pinky finger was caught between the forklift grate and the pallet jack handle. The employee suffered a laceration to their pinky finger.",1
An employee was operating a stand-up forklift. Another forklift stopped in front of his and its raised forks lacerated the bottom of his right foot.,1
"On December 23, 2020, an employee was cleaning overhead piping using an extended brush on an 8-foot A-frame ladder. The ladder began to tip and the employee fell to the floor, suffering two broken bones in the ankle that required surgery.",1
"An employee was cleaning and reinstalling the X-axis way cover on a machine when the employee slipped and fell onto the machine, suffering an abrasion to their face under the eye.",1
"An employee tripped and fell on a restroom floor slip carpet, hitting a door frame and suffering a broken lower-back vertebra.",1
"An employee slipped on ice and fell in a parking lot, suffering a broken leg. She was hospitalized.",1
"A forklift was lowering a 7,500-pound motor onto timber cribbing. The timbers shifted and the motor moved, then slid off the forklift blades. It pinned an employee against a hydraulic skid, breaking the employee's left femur and right leg before the knee.",1
An employee slipped on ice in a lot and suffered a broken ankle.,1
"An employee was replacing a lower window sash when the upper window sash fell on his gloved left hand, amputating a fingertip.",1
"An employee slipped on ice and fell to the ground, suffering broken ribs.",1
An employee was trying to slow down a forklift to prevent a collision with another forklift. The employee's left foot was smashed between the two forklifts.,1
"An employee was emptying a forklift hopper of steel chips into a larger bin. The employee's left index finger was pinched between the fork of the forklift and the hopper, causing the amputation of the fingertip.",0
An employee was shocked by live electrical wiring.,1
"An employee was working in the cab of a truck. The employee developed chest pain, difficulty breathing, and dizziness caused by exhaust fumes from a leaking hose. The employee was hospitalized.",1
An employee was bitten by two dogs while delivering mail at a residential home.,1
"A bank teller was punched in the face by a customer, suffering a broken cheekbone and a fractured eye socket.",1
An employee was loading a cinder block into a golf cart. The block rolled and disengaged the parking brake. The cart pinned the employee's leg against the pallet of cinder blocks and broke it.,1
"An employee tripped and fell to the floor, suffering a closed fracture of the left hip.",1
"An employee was cleaning a running roller conveyor. The employee's right ring finger was caught in a gap between the roller and the conveyor frame, and the fingertip was amputated.",1
An employee slipped and fell to the ground while unloading packages from a mail truck. She suffered a compound fracture of the right elbow.,1
"An employee was operating a ride-on pallet jack when it struck a concrete pillar. He fell off and hit his head on the concrete floor, suffering a head injury.",1
"An employee lost his balance and fell to the concrete floor, striking his head on the floor and suffering a severe concussion and brain bleeding.",1
An employee was driving a forklift when his foot was caught and crushed between it and a metal pole.,1
"An employee lost balance and hit a counter, suffering injured ribs.",1
"An employee fell from an extension ladder, landed on asphalt, and broke his left wrist.",1
An employee slipped on ice on a concrete parking deck. The employee suffered a broken pelvis.,1
A garbage truck driver had noticed that the hydraulic oil level for the truck's packer blade was low. He was adding oil to the reservoir when the blade retracted and crushed his right hand against the truck body. He suffered two broken wrist bones.,1
"An employee was pushing a mail cart. A forklift was carrying a box in the area; the box struck the mail cart and pushed it into the employee, who fell and hit her head. She suffered a concussion and arm pain.",1
"A shoplifter closed a door on an employee's right foot during an altercation, causing a foot injury that required hospitalization.",1
An employee slipped on the floor and severely injured her right knee. The employee was hospitalized.,1
An employee was struck in the leg by a steel wire-braided discharge hose that jumped when pressure was applied. The employee suffered a broken leg.,1
A veterinarian was bitten by a cat during a medical treatment.,1
"On December 26, 2020, an employee reached under a chain conveyor to get a piece of wood that had splintered from a pallet. The conveyor had been stopped, but it advanced and the employee's left hand was pulled between it and a tension roller. The employee suffered crushing injuries to the hand and amputations to the left middle finger and thumb.",0
An employee was cutting meat on a bandsaw when the sawblade cut the employee's left thumb. The employee was hospitalized.,1
"An employee was cleaning flakes around a hopper/box. The employee's right hand came in contact with machinery under the hopper, causing injuries to the middle and index fingers. One joint of each finger was amputated.",0
"An employee was attempting to remove a safety block from a machine with a pry bar when the pry bar struck the employee in the face, resulting in lacerations to his face and right eye and requiring surgery to his right eye.",1
"An employee was moving a set of rollers. The crossbar fell off the rollers and struck the employee's toe, causing its amputation.",1
An employee tripped on a blood pressure cuff while walking around a hospital bed. She fell to the floor and suffered a dislocated left shoulder and a broken left arm.,1
An employee had been loading a safe with a forklift. The employee was adjusting the forks of the forklift when their finger got caught between the forks. The employee sustained an amputation to the left ring finger.,1
"Two forklifts were traveling down a warehouse aisle. The one in the rear struck the one in front, and its operator suffered an injury to the left heel. He was hospitalized.",1
An employee was turning a pallet jack when his left foot slipped and was pinned between the jack and angle iron. He suffered fractures to the left ankle and left tibia.,1
"On December 27, 2020, an employee was chipping ice under the ramp toe plate using a hand chipper. The employee walked backward to move from the area and struck the back of their head on a shackle attached to the frame of the ramp. The employee was hospitalized for a bruise/contusion and abrasion.",1
"An employee was moving pallets when a forklift ran over his leg. He suffered fractures to his left femur and right tibia and was hospitalized, requiring surgery.",1
"While extinguishing a grass fire, an employee came into contact with an energized wire hanging from a utility pole. The employee suffered electrical burns to the back, left arm, and thighs.",1
"On 12/28/2020, while an employee was attempting to fix a pallet that was stuck to a palletizer, a photoelectric sensor on the palletizer tripped, causing a metal plate (apron) to retract. When the plate retracted, 11 cases of product dropped onto the employee's head, shoulder, and wrist, resulting in a small subarachnoid bleed and a sprain in their right wrist.",1
"While lowering an infant care station crib to the floor to be serviced, an employee fell to the floor with pain in his right hip. The employee sustained a hip injury.",1
"An employee was working from the third rung of a ladder, installing a fitting on a new transport line. He fell and his left middle finger was caught by the edge of the pipes and fittings, which amputated the fingertip.",0
"An employee was walking backward with a yarn buggy in tow when her right hand was caught in between the yarn buggy and a support I-beam, resulting in amputation of her right pinky fingertip.",0
"An employee was removing a hose from a truck. Pressure in the hose caused asphalt to blow back on the employee, who suffered second-degree burns to the left hand and chemical burns to the face and neck.",1
"An employee had been hauling and disposing of lime kiln filters while wearing dust goggles, hearing protection, steel-toed shoes, and a blue medical mask. About one to two hours after the process was completed the employee noticed irritation in his mouth and throat. The employee was hospitalized with irritation of the upper respiratory tract due to lime dust.",1
"An employee was cooking on a grill in a cafeteria. The grill's burner ignited gas leaking from the grill's hose, and the resulting fire set off the sprinkler system. The employee slipped on water from the sprinkler while evacuating, fell, and struck his head on a metal sink. He suffered a laceration to the right temple, as well as a burned left forearm.",1
"An employee was helping unload a truck using an accordion-style rolling table. The table fell onto the employee's left hand, causing an amputation to the little fingertip.",0
"An employee slipped on ice while walking through the parking lot and fell, resulting in hospitalization for a fractured leg.",1
"An employee was operating a stand-up forklift. His left foot was caught between the forklift and a concrete bollard, suffering multiple fractures and ligament damage.",1
"While walking outside, an employee slipped on ice and fell on the ground. The employee was hospitalized with a fractured leg.",1
"An employee was 6 feet up an 8-foot step ladder securing overhead wires. He fell off the ladder, suffering a head injury.",1
"On 12/28/2020 at 7:45 AM, an employee was freeing a bag that was caught in the product bagging machine and amputated his left index finger.",1
"An employee was operating a hoist when equipment fell from the hoist, landing on their foot and causing a fracture.",1
"An employee was running cardboard through a machine to stamp a company's logo on it. As the employee added ink to the roller, the employee's right hand, wrist, and forearm were caught between the transfer roller and the print roller. The employee sustained a fractured finger and severe lacerations. The employee was hospitalized.",1
"An employee slipped on ice in a parking lot and fell to the ground, suffering injuries to the back, knee, and ankle.",1
"An employee was helping the gang saw operator by unloading the wood from the saw. A piece of wood was jammed in the saw. The saw was turned off. As the employee removed the jammed wood, his hand contacted the still spinning blades and sizer teeth. The employee received lacerations and contusions requiring hand surgery.",1
An employee was guiding a manhole lid to be set on the manhole when their right ring and middle fingers were caught between the lid and manhole. The employee suffered amputation of their right ring and middle fingertips.,0
"An employee was climbing a 6-foot ladder to remove a window contaminated with lead when they fell approximately 3-5 feet to the ground, resulting in a fractured T7 vertebra.",1
"An employee slipped and fell while walking through a bakery. The employee's head and right eye struck a metal prep table, causing right-side head trauma and an injury to the eye.",1
"An employee was walking inside an air can from an air unload grating/platform. The employee fell through the gap between the air trailer and the platform, suffering an abdominal area laceration.",1
An employee was using a meat saw to slice meat. The sawblade amputated the tips of her left middle and ring fingers.,0
"An employee was exiting the building following her shift when she slipped on ice and fell, resulting in hospitalization due to a broken and dislocated left ankle.",1
"On 12/29/2020, an employee stepped off the back of a truck and fell to the ground, resulting in hospitalization for two broken ribs.",1
"An employee was working on a steel I-beam that was being driven into the ground with a hammer from a crane when the employee's right pinky finger was crushed between the I-beam and the hammer, resulting in amputation.",0
"An employee was in an aerial lift installing a concrete form. As the employee was installing the turnbuckles on the concrete form, the aerial lift was positioned between the building and a 7.6Kv powerline. The aerial lift contacted the power line and the employee was electrocuted.",1
"While performing housekeeping tasks, an employee slipped and fell forward onto his knees, resulting in a distal fracture on his right femur.",1
"An employee tripped over a floor mat and fell to the floor, resulting in broken ribs.",1
An employee's right little finger was caught in a closing door. The fingertip was amputated.,0
"On 12/29/2020, an employee was changing out a machine's wire bobbin when the high-speed spinning wire got loose and cut the employee's right hand, resulting in a laceration and a 1-inch to 2-inch wire embedded in his palm.",1
"An employee was cleaning a steel catwalk and removing and collecting a come along pulley and chain device to place back into a storage location. While moving backward, the employee stepped into an open floor hatch in the catwalk floor and fell 22 feet. The employee was hospitalized for a broken ankle and a sprained back.",1
"A door-to-door salesman was robbed at gunpoint and shot in the face, requiring surgery.",1
An employee was removing tags from pallets when they tripped over an extension cord and fell to the floor sustaining a broken femur.,1
"An employee tripped on a floor mat in an office and fell to the floor, suffering a right hip injury.",1
"An employee slipped while putting a manhole ladder into the hole of a structure. The employee fell into the hole and landed about 14 feet below, hitting his head, chest, and leg on the ground. He suffered two cracked ribs, a foot injury, and head trauma and was hospitalized.",1
"An employee was removing a cap from a standpipe. The cap came loose and was launched about 18 feet into the air, along with the tools being used to remove it. The employee suffered a fractured left cheekbone and a 1-inch laceration to the left cheek.",1
"While inserting laminated insulation pieces into aluminum wall panels, an employee collapsed and struck his head on an insulation panel. The employee sustained three lacerations to the head.",1
"An employee had just finished changing and adjusting the belt on a foundry standing grinder when the employee's left index finger made contact with the rotating wheel, resulting in a partial amputation.",0
"On December 29, 2020, an employee was pushing a robotic cart and suffered a lower back injury.",1
"During setup of a hydraulic hose cutoff machine, an employee was removing a piece of scrap hose when the machine activated and amputated the employee's right index fingertip.",0
"An employee was monitoring parts of an elevator being moved off a transport truck when a piece of the elevator fell and struck the employee, resulting in a fractured right ankle and fractured ribs.",1
An employee slipped and fell getting out of a truck. The employee suffered contusions to the head and a left-side rib.,1
"An employee turned to walk away when they tripped on a garden hose on the ground and fell, resulting in a fractured femur.",1
"An employee was removing lumber from a steel beam with a claw hammer. A metal sliver flew into the employee's right eye, causing an injury that required hospitalization and surgery.",1
"An employee was walking beside a forklift to help guide a piece of scrap granite that was being held by a crane attachment on the forklift. While walking, the employee fell into a hole in the asphalt and was run over by the forklift tires, resulting in a broken leg and foot.",1
"An employee was cleaning a manure belt. The tool the employee was using got caught in the belt, pulling his hand along with it into the machine. The employee's hand was crushed.",1
"An employee was operating a paper rewinder machine when he slipped and his fingers went into a nip roll. The employee sustained an amputation to the pinky fingertip, and two other fingers were injured.",1
"An employee was operating a gluer machine. The employee's left hand was caught in the feed section of the machine, resulting in the amputation of the hand.",0
"An employee was cutting down a birch tree. While he was making a cut to remove a section of the tree above his tie-in location, the tree broke below his feet. He fell to the ground about 20 feet below and suffered broken ribs and internal bleeding.",1
"An employee was on a truck, trying to put insulating blankets in a blanket tube. He fell off the truck to the ground and suffered a broken right arm.",1
"An employee was climbing a ladder up the side of a truck. The ladder broke free, causing the employee to fall to the ground and suffer a broken pelvis.",1
"On December 30, 2020, an employee was manually lifting a roll of film. The employee tripped and fell; the roll landed on their left hand. The end of the employee's fourth finger was amputated.",0
"An employee was walking to help a customer pump gas when her ankle twisted and she fell to the concrete floor, breaking her right ankle.",1
An employee was changing the battery on a forklift when her left middle and ring fingers were caught between the battery and the structure. The middle fingertip was amputated and the ring finger sustained a laceration.,1
"An employee went into the parking lot to change a sign, slipped on ice, and suffered a broken leg.",1
An employee was walking up a paved walkway to deliver a package to a condo building when she slipped on ice and fell on the pavement. The employee was hospitalized with a fracture to her right hip.,1
"An employee had setup a table saw to cut a small piece of wood. While cutting the wood, the blade of the saw caught the employee's left index finger and partially amputated it at the first knuckle.",1
"An employee was climbing a ladder to an airplane. The employee fell from the ladder to the concrete ground, breaking both ankles.",1
An employee in the deli department was cutting tomatoes with a mandoline when the mandoline amputated their little fingertip.,1
"The injured employee was on the ground holding the bottom part of a sprayer while a coworker sprayed releasing agent onto concrete forms. The coworker noticed that the form was leaning toward the injured employee and shouted to warn him. The injured employee tried to run, but the form fell forward on his lower torso. The employee sustained a fractured hip.",1
"An employee was on a baker scaffold set at approximately 4 feet high, preparing the existing siding on a house to receive new siding at the eve of the porch roof addition. A temporary post that was supporting the roof's ridge beam was removed causing the roof structure to collapse, striking the employee. The employee sustained fractures to the left hip and left shoulder requiring surgery.",1
"An employee was walking out to a customer's vehicle to help the customer load plants. The employee went to walk under a sod shed, tripped over the shed, and impacted the concrete ground. The employee sustained a fractured right elbow.",1
"An employee was using a rag to wipe lubricant off the feed table of a flexo machine. The rag was pulled into the feed rollers, pulling the employee's hand with it. The employee sustained an amputation to the right index finger.",0
An employee was unloading produce from the back of a truck trailer when he slipped and fell to the ground breaking his left ankle. The employee was hospitalized.,1
"An employee was walking down stairs when they tripped and fell down three steps, resulting in a fractured elbow.",1
An employee was bagging groceries. The employee suffered a strained shoulder while lifting products off the register.,1
An employee was conducting a pre-trip inspection on his truck when he slipped on ice and tore his left quadriceps muscle.,1
"An employee was backing up an electric triple pallet jack when it struck a concrete bollard. His right foot was caught between the bollard and the jack, sustaining broken toes.",1
An employee was packing hind feet in boxes when their artificial finger nail was caught in a segmented transfer conveyor. The employee sustained an avulsion and required surgical amputation of the left middle fingertip.,1
An employee slipped on detergent that had spilled and fell on the floor. The employee landed on their left arm fracturing the radius.,1
"While walking at grade under an asphalt rail car loading rack, an employee tripped on concrete that was protruding from the walkway. The employee fell and sustained five broken ribs.",1
"An employee was driving a vehicle when another vehicle struck it. The employee suffered a compression fracture to a back vertebra, as well as a contusion to the right lung.",1
"An employee on the bed of a hay delivery truck was removing twine from a bale of hay when he slipped and fell approximately 4 feet from the truck to the ground. The employee landed on their right foot, then rolled the right foot/ankle and caught himself with his right hand. The employee was hospitalized with a broken tibia and fibula which required surgery, and also sustained a dislocated right pinky finger.",1
An employee fell to the ground while dismounting the back of a truck. The employee landed on his side and sustained fractured ribs.,1
"An employee was loading inventories when a van flipped and hit the employee, throwing the employee into a concrete wall. The employee sustained a ruptured spleen, fractured skull, laceration to the brain, brain swelling, broken ribs, and collapsed lungs.",1
"An employee working in the sausage stuffing process area went to the storage area to retrieve casing for the sausage. The employee retrieved about 25 lbs. of casing using a stainless steel rolling cart. While pulling the cart back to her work area she lost footing and fell with the cart. The employee held onto the cart's handle and her fingers got caught between the cart and the concrete floor, amputating the left middle and ring fingertips.",1
"An employee fell while descending a ladder, suffering a broken elbow and a bruised hip.",1
An employee was adjusting a guard on a machine when his glove caught on the sharp edge of the guard. The metal guard partially amputated the employee's left middle finger.,0
"While walking to a gate an employee tripped on uneven concrete and fell to the floor, sustaining a broken left hip.",1
"An employee was using a scraper to clean a dryer chute. As the employee was cleaning the inside of the chute, the air lock blades amputated the employee's right middle, ring, and index fingers. The machine was running at the time.",0
A letter carrier slipped on black ice while exiting a mail delivery vehicle. She fell and suffered a broken ankle.,1
"An employee was cleaning trash when he stepped on broken glass, leading to a laceration that became infected.",1
A ski instructor was struck by a snow boarder. The employee was hospitalized with a rib fracture and pneumothorax.,1
"While retrieving a bag of ice an employee lost their footing and fell to the ground, sustaining a face contusion.",1
An employee was holding a door open for a customer. His left middle finger got caught in the backside of the door frame as the door was closed. He sustained an injury that resulted in a fingertip amputation.,1
A delivery driver was tasked with delivering a washer and dryer to a customer's home. The employee was retrieving a cord on the delivery truck when he lost balance and fell off the back of the truck onto the ground. The employee was hospitalized with a broken arm.,1
An employee had placed a machine in slow-speed mode and was wiping the inbound feed roller. The employee's left hand was caught between the roller and steel material. Their left index finger was injured and was subsequently medically amputated.,0
"An employee was preparing to clean the bottom of a grain bin of soy beans when his safety rope became entangled in the auger below the floor. He wrapped the rope around his wrist to try and free it and was pulled down to the floor, resulting in a broken left wrist.",1
A mail carrier was bitten by two dogs while delivering mail on a porch. The employee sustained injuries to their hand.,1
"An employee was driving a forklift when it crashed into another, stationary forklift. His left foot was crushed.",1
A maintenance mechanic was working with another employee to fix the recycle waste conveyor chain. They needed to knock out a bushing on the conveyor chain using a steel rod and bull pin. The employee working with the mechanic struck the metal rod while the mechanic's finger was between the rod and the bull pin. The mechanic's right middle finger was partially amputated.,0
The injured employee was going to enter a room at the same moment another employee was exiting the room. The door swung open and struck the injured employee. The injured employee fell to the concrete floor and broke her hip. The employee was hospitalized.,1
A lineman was cutting a tree from a power line when the tree split and fell on him. The employee sustained fractures to both legs.,1
"The injured employee was helping a forklift operator weigh and load scrap aluminum into a shipping container. The employee was caught between the forklift's hopper and a shelf mounted to a cinderblock wall and hospitalized for a broken pelvis and a lacerated spleen, colon and liver.",1
A maintenance employee working in a hot box area slipped on a buildup of ice on the floor. The employee fell backward and sustained a skull fracture resulting in hospitalization.,1
A temporary employee was removing meat from a cooking pot when boiling water spilled into his boot. The employee was hospitalized with a burn to his foot.,1
"An employee was moving food product from a taller pallet onto another pallet in the back storage room when he caught his foot on a piece of plastic from a pallet and fell to the ground, resulting in a broken right ankle.",1
"Two employees were installing exhaust piping on a fryer. The injured employee was stabilizing and rotating the middle section while Employee 2 was bringing the stacks together. Employee 2 had material slip out of his hands, which then fell onto the injured employee's finger causing the amputation of the left index fingertip.",0
"On 1/3/2021, an employee was operating a press with a rotating table to fabricate a part. When the employee pressed the palm button on the machine, his left hand fingers slipped forward and entered the swing radius of the block extension on the rotating table. The block extension amputated the tip of the employee's left index finger to the knuckle.",0
"An employee had been getting produce from the backroom. The employee tripped and fell to the floor, sustaining a hip injury.",1
"An employee was unloading bore gel from a trailer when they fell in a hole in the trailer decking, resulting in broken bones in their foot that required surgery.",1
"An employee was getting snow off of stored boats and their covers when he slipped on a patch of ice under the snow and fell on the tongue of a trailer, landing on his back. The employee suffered two broken ribs and a partially collapsed lung.",1
"An employee was rodding out scale and lime material from a chute that led into a screw. A chemical reaction took place between the lime scale and the materials used in the process, and the employee suffered first- and second-degree burns to the face and arms from hot vapor.",1
"An employee went to release a kink in a flexible hose of a dewatering system/pump when his fingers got caught between the hose, resulting in injuries to three fingers and a dislocated wrist on right hand.",1
"An employee was walking into the building from outside when they slipped on a concrete floor and fell, resulting in hospitalization due to a broken ankle.",1
"An employee was operating a tuber machine and was caught in a shaft on the machine. She suffered a broken leg, a thumb amputation, a scalp avulsion, and the loss of part of her face.",1
"An employee was operating a standup lift and lost control while entering the charging area. As the employee jumped from the lift, his left foot was caught between a floor barrier and the lift, resulting in a fracture to his left heel.",1
"On January 4, 2021, an employee was operating a pneumatic press with an operating pressure of 400-700 psi. The employee as cycling the press when they reached down to retrieve a cutting die that fell off the staging block. The employee's left index finger was caught in the point of operation, resulting in an amputation.",0
"An employee was power washing a wall while on top of scaffolding when they slipped and fell to the concrete below, resulting in a head injury.",1
"On January 4, 2021, an employee was walking in the parking lot when they slipped on black ice and hit their head, resulting in a concussion that required hospitalization.",1
"An employee was walking back to his truck after delivering a package when the homeowner's dog became untethered and attacked the employee, resulting in an amputation to the tip of his right thumb.",0
"On January 4, 2021, an employee fell down a flight of stairs, landing on the floor suffering knee and lower back injuries. The employee was hospitalized.",1
"On January 4, 2021, an employee was holding two runs of duct work that were inserted into a tabletop corner insertion machine when the machine activated by proxy switches that sense the presence of the metal and begin the sequence. An angle fixture popped out of the table and traveled from a horizontal to a vertical position to hold the duct work while a corner clip was being applied. The employee's gloved left ring finger was pinched by this angle fixture, resulting in an amputation.",0
An employee was attempting to hook a converter dolly to a trailer when his left hand was caught between the dolly and the trailer resulting in a crushing injury that required hospitalization.,1
"On January 4, 2021, an employee was standing on a platform while pulling an object when they fell backward through railings 8.5 feet to the concrete floor below, resulting in hospitalization due to a concussion and lacerations to the head and leg.",1
"An employee was removing product debris from a conveyor when his right index and middle fingers were caught between the pulley and the belt, resulting in fingertip amputations.",0
An employee was cutting a tree when the chainsaw kicked back resulting in a deep laceration to the knee. The injury required surgery.,1
An employee was filling a refrigerator with bottled water when the employee slipped and fell on the concrete floor. The employee was hospitalized with a fractured right hip that required surgery.,1
"An employee was operating a scissor lift when his finger got caught between an electrical panel and the lift's railing, resulting in a fingertip amputation.",0
"On 1/4/2021 at 12:15 pm, an employee was placing meat into a meat grinder and when the foot pedal was pressed and the machine turned on. The grinder caught his hand, which resulted in a soft tissue injury to his right hand that required hospitalization.",1
An employee was opening a valve to prepare it to be drained of sulfuric acid when a pump failed and sulfuric acid sprayed onto the employee causing chemical burns.,1
"An employee was installing metal roofing for a residential home. The metal z-bar he was using contacted a powerline. The employee was shocked and fell about 10 feet from the home's rooftop. He sustained severe electrical burns to his hands, arms, and legs.",1
"An employee was assisting another employee with adjusting the wire ropes in the main boom tube on a boom lift. While checking the tension on the wire ropes inside the boom tube, the boom retracted, resulting in amputation of two fingers on the employee's left hand.",0
"The injured employee was assisting another employee with loading grates onto a bucket loader. The injured employee's left index finger was caught between the grate and the loader bucket, resulting in amputation at the first digit.",0
"An employee was inspecting components and contacts of a transformer load tap changer in a substation. When the equipment rotated, it caught the employee's left middle finger, causing an amputation at the nail bed.",0
"An employee was on a ladder removing Christmas lights from the trees on the property and fell approximately six feet to the ground. The employee was hospitalized for a fractured neck, chipped teeth, and a forehead laceration.",1
"An employee returning  to his work station walked by a forklift in operation when the forklift's tire struck his left ankle, resulting in swelling in his ankle and calf.",1
"An employee fell to the floor while descending a 3-foot step ladder, resulting in a fractured left leg.",1
An employee was adjusting the bottom plate pneumatic lifting cylinder on a pre-curl machine when the employee's finger was crushed between lift cylinder plates. The employee sustained a broken left index fingertip.,1
An employee was standing next to the passenger side of a cement truck when the truck moved and rolled over the employee's left leg resulting in a broken ankle.,1
"An employee was cutting plastic straps off the crates of delivered kitchen cabinets when his knife slipped, resulting in a stab wound in his lower right abdomen.",1
"An employee was working on a pocket jig machine. The employee's middle finger came into contact with the point of operation, and the employee suffered a partial amputation to the finger.",1
"An employee was repairing a forklift when his middle finger was smashed between the hydraulic ram and the sides of the forklift. He was hospitalized, undergoing surgery.",1
"An employee was cutting a 4'x8' sheet of OSB with a saw when the saw's cord caught on the bottom of the sheet. The saw kicked off the board and contacted the employee's left hand, resulting in the amputation of three fingers. The middle finger was reattached and the other two fingers required stiches.",0
"A service technician was inspecting a skid steer that had been brought in for repairs to its hydraulic system and track replacement. While inspecting the unit for leaks, the machine began to roll backward onto the employee's right leg breaking their right foot. The unit was running at the time.",1
"An employee was cutting and splitting logs with a hydraulic splitter when their finger became crushed between a log and the hydraulic splitter, resulting in a fingertip amputation.",0
"An employee exited their semi-truck in order to chock the tires. The employee slipped on ice directly alongside the driver side door and fell, resulting in a leg injury.",1
"An employee was swapping valves when a pneumatic valve actuated, resulting in amputation of their right index fingertip.",0
"An employee was working on the second or third rung of a 6ft. bi-fold ladder pulling down the burned out remnants of an attic access ladder when one of the springs fell, striking the employee. The employee lost his balance and fell to the concrete floor, fracturing his humerus.",1
An employee was working in the milling department when a clamp caught their right ring finger causing a partial amputation.,0
An employee was cutting a tree into smaller sections for transport by a trackhoe. A section of log that was being picked up by the trackhoe slipped and caught the employee's lower right leg between two logs. The employee suffered a fracture to the lower leg/ankle.,1
"An employee was loading the fertilizer hopper in the fertilizer house. As he was loading the hopper, his left foot was caught in the hopper while breaking up a fertilizer clump, resulting in injuries to his left foot that required surgery and hospitalization.",1
"An employee attempted to clear debris from a drill auger and was pulled into the machine, resulting in injuries to their right arm and head.",1
"An employee was unloading a manufactured home when it slipped off of its jack, pinning the employee under the home and resulting in a fractured back.",1
"An employee was lifting a leather sofa so he could place a rug under it. His right hand slipped off the sofa, which landed on his left wrist, causing an avulsion and arterial damage.",1
An employee performing window trim carpentry was standing on a two-foot A-frame ladder atop a roof overhang when they fell about 11 feet to the ground. The employee was hospitalized with a fractured pelvis.,1
"An employee was doing roof work on a manufactured home inside a plant. As he stepped off the roof onto an extended ladder, his foot slipped between the rungs. The ladder gave out and he fell about 13 feet, suffering torn anterior and posterior cruciate ligaments in the right knee and leg (as well as a possible blood clot). He was hospitalized.",1
"On January 6, 2021, an employee was placing materials on a second floor apartment balcony. When the employee leaned against the guardrail, it failed and the employee fell about 10 feet to the asphalt ground. The employee suffered a broken right leg.",1
"An employee tripped on a brick retaining wall and fell to the ground, suffering fractures to the right radius and ulna.",1
An employee was descending a ladder on scaffolding when the employee slipped and fell approximately 8 feet. The employee was hospitalized with a right ankle injury.,1
An employee was operating a forklift to move racks from one area of the warehouse to another when one of the racks on the forklift fell backward and hit the employee. The employee was hospitalized with a broken pelvic bone.,1
"An employee was lowering a 400-pound sheet of plate steel onto a table using a hoist system. The safety hook failed and the sheet of metal fell 8 feet, striking the employee in the left leg and breaking the tibia.",1
"An employee was burning cardboard in a 55-gallon drum. Grease on the employee's coat caught fire, causing burns to the employee's lower back that required a skin graft.",1
"An employee was struck by a shipping van while providing directions to the driver, resulting in an injured shoulder.",1
"An employee was releasing a load of formwork. The form dropped on the employee's thumb, causing the amputation of the thumb tip.",0
"An employee was adjusting end caps on a fuel tank when the end cap clamps were activated, causing the employee's right thumb tip to be pinched between a cylinder and the end cap and resulting in an amputation.",0
An employee fell off a truck while trying to unload it. A wire reel then fell from the truck onto the employee and injured his leg.,1
"An employee was removing a water tray from a seeder to fill it with water when the chain and sprocket of the seeder came into contact with the employee's left thumb, resulting in a fingertip amputation.",0
An employee was placing chicken into a shredder and amputated their right middle finger.,0
"An employee was training a mechanic when he opened an interlock door to show the interior of the machine to the trainee. He used a flashlight to see inside the machine and his right index finger got caught in a moving belt and pulley, resulting in a fingertip amputation.",0
"An employee was assaulted by a client and hospitalized for a concussion and head, neck, and back pain.",1
"During a training session, an employee was tearing down parts on a strut machine when they amputated their right index finger.",0
"On January 6, 2021, an employee was installing a tarp on a semi-trailer while standing on the tarp rack platform next to the trailer. As he was descending the platform, he slipped and fell between the trailer and the tarp about 12 feet to the ground. He suffered a broken left ankle and was admitted to the hospital.",1
"A crew was replacing a utility pole when the rope holding communications cable to the pole was cut, causing the pole to fall and strike an employee in the ankle. The employee suffered a fracture to their right ankle.",1
"On January 6, 2021, a maintenance employee was clearing a jam on the auger of a recycling machine when the machine activated and amputated the employee's right middle finger at the middle knuckle.",0
"While climbing a ladder on a fixed platform, an employee reached for a handrail to pull himself onto a deck when he fell approximately 8 feet to the lower level, landing on his feet. The employee was hospitalized with a fractured left foot.",1
"At 10:00 a.m. on January 6, 2021, an employee was operating a 55-gallon drum crusher when the ram of the crusher pushed the ½-inch metal door outward, breaking the door welds and striking the employee in the head. The employee suffered head trauma and was hospitalized.",1
"At 10:00 a.m. on January 6, 2021, an employee was descending an aircraft's boarding ladder when his foot got caught on the bottom rung. He fell backward onto the concrete floor about 2.5 to 3 feet below. The back of his head struck the floor, and he suffered an abrasion and brain swelling.",1
An employee was making final adjustments to a box top paper machine after doing maintenance on the machine. Moving parts in the machine crushed the employee's left little finger. The finger was medically amputated.,0
"An employee was changing a lighting fixture from a scissor lift. He was shocked and fell out of the lift onto an aisle end cap. He was hospitalized, suffering from back injuries.",1
"An employee slipped and fell onto a wet concrete floor, resulting in an open fracture to two bones in her left wrist.",1
"An employee was trying to rewind a coil of steel inside a press machine. The press was actuated, and the employee was pinned between the steel coil and a coil support. The employee suffered a partial collapsed lung.",1
"An employee was setting wall panels with a crane while on a building. When the employee bent over to freshen up a line with another employee, the crane started to lift a 24-foot, pre-built wall, causing it to swing over. The employee backed away from the wall and fell off the edge of the building, resulting in a broken knee, hip, wrist, tooth, and nose, as well as a fractured skull and a laceration across the face.",1
"An employee was rounding out the manway of a tank using a portable 10-ton air jack. The opening of the manway was 24"" in diameter. The employee and a co-worker were using the jack along with wood shims to prevent the tank from being damaged. One of the wood shims shot out under uneven pressure and struck the employee in head. The employee was rendered unconscious and was hospitalized for a head injury.",1
"An employee was shrink-wrapping a pallet when he tripped over a strap on the bottom of the pallet. He fell, suffering a back and hip injury.",1
"An employee unloading a crate attempted to turn the crate near the rear of a trailer so that he could get a pallet jack under the crate. A board broke off the crate and the employee fell out the rear of the trailer, landing on the ground and suffering a fractured pelvis that required hospitalization and surgery.",1
"An employee was drilling metal plate. The drill bit caught the employee's left glove, drawing in the employee's hand and amputating the thumb.",1
An employee suffered a heart attack after breaking up an altercation between an employee and a guest.,1
An employee was operating a 16-inch pedestal sander when it caught his left hand causing abrasions to his hand and fingers.,1
"An employee was supervising tree trimming on a golf course. Two of his co-workers were trimming branches when a branch fell to the ground, bounced up, and hit the employee, knocking him to the ground and resulting in an injury to his left knee.",1
An employee was about to cut lumber with a chop saw. The pulley caught his right thumb and broke it.,1
An employee was cutting wood on a table saw and amputated a fingertip.,0
"An employee was emptying trash when she tripped on a packing station and fell to the ground, suffering a broken pelvis.",1
"An employee was installing insulation from a six-foot scaffold, stepped backward, and fell off the scaffold. The employee was hospitalized for a bruised kidney.",1
An employee was stabbed with a knife in a break room.,1
"An employee was operating a router machine when his left hand became caught in the machine, resulting in partial amputations to three or four fingers.",1
"At 2:00 p.m. on January 7, 2021, an employee was at a dock, making a delivery. The employee began to close the dock's overhead door, which was closed using a hanging rope. As the heavy door came down, the rope tightened around the employee's left index finger and caused an amputation above the first knuckle, just below the fingernail.",0
"An employee was holding a pipe assembly, filled with CO2 pellets and sealed at the ends. The CO2 gas expanded, causing the end caps to fly off; they struck and injured the employee's chest, his right bicep, and his right hand.",1
An employee's hand was burned by hot oil in a fryer.,1
An employee was replacing a light fixture in an office ceiling and sustained a possible electric shock. The employee fell from the stepladder and suffered fractures to the face and left shoulder.,1
"Employees had just finished a vacuum test on a sewer manhole. They removed the vacuum test lid from the manhole and were moving to place it into the back of a truck when one of the employees fell into the manhole, landing 13 feet below and suffering a broken left leg.",1
"At 4:17 p.m. on January 7, 2021, a USPS carrier was assaulted while making a delivery and suffered a facial injury. The carrier was hospitalized.",1
"A transfer cart started automatically and struck an employee, breaking the employee's leg.",1
"An employee was felling a tree when the tree fell and struck another tree, causing a limb to come loose and strike the employee. The employee suffered a fractured right ankle.",1
An employee fell off a truck while exiting it. The employee landed on the ground and suffered hip strain and pelvic pain.,1
"An employee was working on a metal culvert when his right index finger got caught in a press, resulting in a partial amputation.",0
"An employee was reaching to adjust materials when a burr on the end of a pipe, which was spinning in a CNC machine, caught the employee's clothes. The employee suffered fractures to the left arm, left collarbone, and neck, as well as trauma to a right-side rib and the chest.",1
"At 8:30 a.m. on January 7, 20201, two employees were delivering materials. One of them was holding a cart to load the material, which included a metal package, when the package slid and caught the employee's left hand against the cart. He suffered a partial amputation to the index finger and was hospitalized.",1
An employee parked the van. The employee tried to stop the van as it rolled away and his left foot was struck by the van and fractured.,1
"An employee was feeding brush into a woodchipper when their left leg became caught in the woodchipper, resulting in amputation up to the knee.",1
"An employee was bucking an 18-inch-thick pine tree into logs using a 24-inch-long chainsaw. The pressure of a cut tree released and the tree sprang back toward the employee, crushing his right foot and penetrating his boot. The foot was broken and punctured.",1
"An employee was pressure cleaning while standing on a roof when they slipped and fell to the ground, resulting in a broken ankle.",1
"On January 7, 2021, an employee fell while trying to stop a rolling vehicle. She landed on the ground and the vehicle rolled over her. She suffered a lip injury requiring stitches, abrasions on her arm, and a fractured spine.",1
An employee was loading a trailer. The chocks were removed from the trailer's wheels and it was driven off; the employee fell off the dock onto the merchandise he had been loading. He suffered a chest contusion.,1
"An employee was on a ladder, cleaning an overhead belt with a hose. The employee fell from the ladder and suffered a broken left elbow. The employee was hospitalized.",1
Two employees were moving a 2 ft. x 20 ft. heavy metal railing on a mobile cart into a paint booth for painting. As the employees were positioning the metal beam it became unstable and the end the injured employee was holding fell off the cart to the floor and crushed his right foot. Three toes were amputated.,1
"An employee was attaching a wall form panel to a knuckle boom. The boom lowered, pinching the employee's left hand against the wall panel and amputating the index finger at the knuckle.",0
"At 12:57 p.m. on January 8, 2021, an employee was shoveling clay in a tiger habitat when she re-aggravated a pre-existing back injury and lost consciousness. She was hospitalized.",1
"An employee was rolling logs. The employee stepped onto a shaver box to straighten a log, and his right foot was caught between the shaver box and the drive chain. The foot and the ankle were broken.",1
"An employee was patrolling a wilderness boundary on a snowmobile when the snowmobile rolled over and struck her ankle, resulting in a right displaced oblique distal fracture of her fibula, a dislocated tibia, and displaced ligaments associated with her right ankle.",1
"On January 8, 2021, an employee fell from a ladder he was climbing. He landed on his feet on the ground, about 10 feet below, and suffered a back injury.",1
An employee was operating a forklift when it collided with another forklift. The employee's left foot was crushed.,1
"On January 8, 2021, an employee tripped and fell. His left hand and forearm entered a tube of molten aluminum as he braced himself. He was hospitalized, having suffered second- and third-degree burns on his forearm and wrist.",1
"An employee tripped in a shallow, grass-covered hole by a roadside. He fell, suffering fractures to the left knee and right wrist.",1
An employee was assaulted and injured while sweeping a lot at 3:44 a.m.,1
"An employee was using a rag to wipe down a 3/8-inch metal cable. A burr on the line grabbed the rag, causing the employee's right ring finger to be pulled into a sheave. The employee suffered an amputation to the finger.",1
"A millwright was operating a rotating lathe when it caught his right hand. He suffered an open fracture to the little finger and a laceration to the index finger. He was hospitalized, requiring surgery.",1
"An employee was at the rear of a dump truck, inspecting its load. As the dump body was lowered, the chain securing the tailgate disconnected from the chain lock, enabling the tailgate to swing free and strike the employee from behind. He was knocked to the ground and suffered a laceration to the top of head that required sutures and staples. He was hospitalized.",1
"An employee slipped on a patch of ice while exiting a truck. The employee fell to the ground, suffered a broken ankle, and was hospitalized.",1
An employee was doing maintenance work on a mechanical poultry harvester. The machine amputated the tip of his right middle finger.,0
"Two employees were moving 12-inch-thick rolls of steel. While they were putting one of the rolls into place, it rolled back onto one employee's right hand, lacerating and breaking it.",1
"A temporary employee was using a stand-up reach truck to put away product in a storage rack area. The truck struck the upright supports on a rack, and the first three fingers on the employee's left hand were crushed between the two.",1
"At about 6:30 on January 8, 2021, an employee was working on the dock, pulling up a dock plate, when he fell off the dock surface to the roadway. He suffered a broken lower right arm and was hospitalized.",1
An employee was making a mold when the gate that allows sand to fall down into the molds closed on his finger while attempting to free a part of the machine. The employee suffered the amputation of his left fingertip.,1
"A crane was taking a bent section of pipe out of a portable scrap pocket. As an employee removed a sling on one side of the scrap pocket, the scrap pocket fell over. One of the parts in it struck the employee on the back, knocking him to the ground. He suffered fractured vertebrae, a broken nose, and a facial injury that required stitches. He was hospitalized.",1
An employee was assaulted by a patient in the emergency room. The employee was pushed to the floor and sustained a facial nerve injury requiring hospitalization.,1
"An employee fell while climbing down a scaffold ladder, landing about 13 feet below and suffering a fractured left hip and facial fractures.",1
"At 8:00 a.m. on January 8, 2021, an employee was turning over a magnetized plate on a metal workbench. The plate pinched the employee's right index finger, causing an amputation from the fingernail bed to the tip.",0
An employee was helping to unload lumber from a vessel. A spreader bar struck and injured her stomach.,1
"On January 8, 2021, an employee attempted to hook a converter dolly to a trailer and suffered a hand injury.",1
"An employee was in the bucket of a bucket truck, traveling up to hang a guide wire. He contacted an energized wire and suffered electrical burns to both hands.",1
"An employee was trying to flip a square steel tube using a flip bar. The tube did not flip all the way and came back down onto the employee's left pinky and ring fingers, crushing them against the edge of another steel tube. The employee's left pinky finger was amputated at the first joint and the ring finger was lacerated.",0
An employee was checking the voltage in a transformer. An arc flash caused second-degree burns to part of the employee's face.,1
"An employee was using a drill and drill bit, drilling a hole into a wood floor plate so he could run data cables through the wall. His left hand slipped off the drill; the bit caught his fingers, lacerating the first two and amputating the tip of the middle finger.",0
"On January 8, 2021, an employee was working from an extension ladder painting corbels at the second floor of a roof. A gust of wind caused him to slip and fall onto the second roof, where he broke his left wrist. He was hospitalized.",1
"An employee was transferring a die from a rack to a press machine using a manual roller table. The die fell, pinching the employee's fingers against the guardrail and breaking them.",1
"An employee climbed down a ladder, reached the floor, slipped, and fell, injuring his hip.",1
"An employee was taking product out of a shipper. He stumbled on a pallet behind him and fell, breaking his ankle.",1
An employee was driving a stand-up forklift when he suffered an injury to his left ankle.,1
An employee was troubleshooting the feeding foot of a feeder head on a printing press. A moving part in the press amputated the employee's right index fingertip halfway down the nail.,0
"An employee was trying to remove the cardboard core from a roll of paper using another core. The core he was using smashed his finger, leading to a possible amputation.",0
"An employee was scraping slag off an alloy melting furnace pot when residual liquid nitrogen mixed with molten metal still in the furnace. The instantaneous mixing caused an explosion, which knocked the employee to the ground. His protective helmet and face shield were knocked off and he suffered second- and third-degree burns to the neck and left arm.",1
"An employee tripped on a metal grate in a boiler room and fell, striking his head and right arm and losing consciousness.",1
"An employee was greasing the glass line washer on a glass line. He made contact with a chain and sprocket, causing the amputation (without bone loss) of his left middle fingertip and fingernail.",0
"An employee fell from a ladder, landing about 10 feet below and suffering a head injury.",1
"On January 9, 2021, an employee was buffing a floor with an orbital buffer. The cord wrapped around his ankle and he fell backward, fracturing his skull.",1
An employee was working with a pulley assembly machine. The employee's left little finger was crushed when two brass plates came together for welding. The finger was partially amputated.,0
"An employee fell while climbing a ladder, landing on the ground and suffering a leg injury.",1
"An Amazon delivery driver was walking up a concrete path to deliver a package. She slipped on ice on the path and fell, landing on her upper back and neck. She developed back and neck pain and was hospitalized.",1
"On January 10, 2021, an employee was troubleshooting a pneumatic valve. The valve fired while employee's left thumb was inside it, lacerating the thumb and causing the amputation of 1/4 inch of the tip.",0
"An employee was unloading a truck. A granite countertop slab slipped and hit the employee in the leg, causing a contusion to the right knee.",1
An employee was mounting a tire using a tire machine. The machine caught his right index finger and amputated the tip.,0
An employee was fixing meat in a meat slicer. The slicer amputated her fingertip.,0
An employee was removing a piece of bread from a bread slicer machine. The machine's blade amputated the employee's right middle and ring fingertips.,0
"An employee was using a foaming unit to sanitize floors before rinsing. He was investigating a noise from the unit when it sprayed sanitizing solution into his eyes, burning them.",1
An employee was cleaning a hand mixer in a bakery. The mixer's blades caught and lacerated her hand. She was hospitalized.,1
"An employee was offloading material from a truck. The employee opened the tailgate to remove material, was caught between the tailgate and a wall, and fell to the floor. The employee suffered a broken tibia and a laceration to the leg.",1
"A bus backed into an employee who was working in a field as a harvester. The employee suffered ankle and hip fractures, as well as torn back ligaments.",1
"An employee was cleaning lacquer from rollers. The employee's hand was caught between two rollers, causing a degloving.",1
"At 1:24 p.m. on January 11, 2021, an employee was assisting with curbside Christmas tree pickup when he slipped on ice and fell backward, striking the back of his head on the side of the truck and then on the ground. The employee suffered a left parietal non-displaced skull fracture.",1
"On January 11, 2020, an employee was on the ground guiding a precast panel that was being set by a forklift/tractor. He slipped into a small hole and the forklift/tractor ran onto him, breaking his left foot and ankle. He was hospitalized.",1
"An employee was on a ladder, turning on a switch in a 480-volt electrical bus panel. An arc flash from the panel burned the employee's forearms.",1
An employee was pulling on the fifth wheel release of a tractor trailer when he slipped and fell backward. He landed on the parking lot pavement and suffered a fractured left hip.,1
"An employee was removing a jam from a pellet feed mill bin. The machine was activated while the employee was in the bin, and an auger and flail arm injured the employee's leg. The leg was medically amputated just below the hip.",1
"An employee was using a forklift to deliver material to a job site. The forklift tripped over, pinning and crushing the employee's hand. He was hospitalized, requiring surgery.",1
"An employee was moving leads back to a barge. A pile driving hammer engaged and hit the employee's left leg, breaking the femur.",1
"An employee was setting up a robotic molding machine. The machine moved and struck his left hand, causing a laceration and a fingertip amputation.",1
An employee was pulling apart a piece of metal that he had just cut. He hit a metal cylinder that was being used as a counterweight and suffered a soft-tissue amputation to the right index fingertip.,0
"After leaving a building, an employee slipped on a patch of ice and fell to the ground, suffering a broken ankle.",1
"On January 11, 2021, an employee was driving a tow motor when it went off the side of a truck. The employee was pinned between the truck and a compactor, suffered a spleen injury, and was hospitalized.",1
"On January 11, 2020, an employee was working from the ground to make sure that a forklift was setting bundles of metal plates (about 5,000 pounds) in the right place. One of the bundles was not correctly placed next to another; he was trying to adjust it when it shifted. His left index finger was caught between the two plates, causing the amputation of his fingertip without bone loss.",0
"An employee was working from a ladder, removing a piece of concrete stuck to the chute at the back of his truck. The concrete chunk broke off and the employee lost his balance and fell to the ground. He suffered a broken arm.",1
"An employee was washing equipment with a water hose. The employee's right hand was caught in a chicken neck de-skinning machine, and the machine's rollers and blades amputated the employee's right middle, ring, and little fingers.",1
"At 8:00 a.m. on January 11, 2021, a temporary employee was trying to adjust a truss on a conveyor roller before it went through a press. He was pulled off the ground by the rollers on the conveyor, then fell to the ground and suffered a possible fracture to the left arm.",1
"Two employees were attempting to fix a hot water line leak. While they were putting the valve and gasket back in place, hot water sprayed them. One of them suffered second-degree burns to the forehead and arm and was hospitalized.",1
"An employee was climbing a fixed ladder to access a roof. The employee fell from the ladder or a catwalk, hitting a railing and then landing on the floor. The employee suffered a fractured pelvis, a dislocated shoulder, and partially collapsed lung.",1
An employee was feeding a line into a puller when the material flipped upside down. She was attempting to manually correct it when the puller pulled her arm into the machine up to her shoulder. She suffered a muscle sprain.,1
"On January 11, 2021, an employee's left leg was caught between a freight elevator and the wall of the elevator shaft. The employee suffered broken bones and soft tissue damage and was hospitalized, requiring surgery.",1
An employee was installing electrical conduit from a 12-foot A-frame ladder. The employee fell from the ladder and suffered a broken right ankle.,1
"An employee was securing a third antenna mount to a cell tower. While adjusting his position on the tower, to move the mount being winched into place, he fell approximately 145 feet to the ground, resulting in a broken back, broken pelvis, broken ribs, spleen trauma, and other contusions.",1
"An employee was moving boxed tub walls on the second floor of an apartment complex that was under construction when they fell through a hole on the second floor to the ground 9 feet below. The employee was hospitalized for a fractured collar bone, ribs, and thumb.",1
An employee tripped and fell after returning a shopping cart to a storage area. She landed on the floor and broke her left hip.,1
"An employee was standing on the side of a truck, preparing to unload rebar. The employee slipped, fell to the ground, and suffered head lacerations.",1
"An employee was servicing a pump when a radiator hose released coolant onto the employee, resulting in burns on their chest, abdomen, and right leg.",1
"An employee was counting cases and tripped on a storage rack load bar, causing her to fall and break her left arm.",1
"Two employees were setting up a fryer by purging the pipe that supplies lard to the fryer to clean it from the lard buildup that solidifies after daily operation. As the line was purged, excess air pressure in the line caused the holding tank to overfill and spill hot lard onto the injured employee, causing severe burns to their head and neck area.",1
"An employee was attempting to free a drive that was stuck inside of a jammed strapping machine when his fingers got pulled in between the timing belt and the pulley, resulting in a fingertip amputation on his left hand.",0
An employee suffered a finger laceration while using a pounder to peel truss plates. The employee developed an infection and was hospitalized.,1
A temporary employee was struck by an electric pallet jack while walking in a hallway. The employee suffered leg and ankle injuries.,1
"An employee was standing by a work board with his right hand on a door frame when the door closed on his right ring finger, leading to a distal tip amputation.",0
"An employee was walking outside when they slipped on ice and fell to the ground, resulting in an injury.",1
"An employee was lifting a welded dock platform off the welding area and onto the floor when a caster roller slipped out of the corner of the dock platform. As the dock came back down, the caster roller went back into the corner and amputated the tip of his right index finger.",0
"An employee was cleaning up the roof of a two-story home and fell approximately 25 feet to the bottom of an empty pool. The employee suffered a broken arm and/or a broken wrist, broken ribs, a broken collarbone, bruises, and contusions. The employee also suffered a head injury.",1
A machine operator was troubleshooting a mechanical press machine. The machine severely lacerated his upper right arm and he was hospitalized. The machine's light curtain was not working at the time.,1
"An employee was cleaning up brush on the ground when a loose branch weighing approximately 40 pounds fell 10 feet to the ground and bounced toward the employee's chest, striking them and causing a rib fracture.",1
An employee was greasing a piece of equipment when its belts and sheaves caught his fingers. Two fingers on his left hand were amputated.,0
"An employee was working on a sales floor. The employee tripped over a stock cart and fell to the floor, suffering a hip injury.",1
An employee was using a lathe to smooth out a shaft. The machine caught his left ring finger and amputated it.,0
"An employee was fixing a misaligned piece of paper in a blister packing machine when the machine caught her right middle finger, resulting in a fingertip amputation.",0
"An employee was clearing tree debris with a wood chipper. His right arm got stuck in the chipper and he suffered lacerations to the face, right arm, and hand, as well as finger amputations.",1
An employee was walking across a boat part that was being manufactured. His foot became tangled in a pad/strap used to hoist and move boat sections and he suffered a broken femur and a possible hip dislocation.,1
"An employee was walking through a warehouse when he tripped on a piece of angle iron, fell to the ground, and suffered a broken right femur.",1
"An employee was climbing a ladder when they fell to the ground, resulting in a concussion.",1
"An employee was loading a dumpster onto a roll-off trailer by pulling the dumpster with a braided metal cabl. The cable came loose and hit the employee in the face, resulting in a cut from his nose to the middle of his head that required hospitalization and sutures.",1
An employee was acting as a ground guide for a vehicle as it backed up. The vehicle struck him and broke his left tibia and fibula.,1
"As an employee placed a piece of metal into a spot welding machine, the machine's foot pedal was pressed while the employee's hand was still in the machine, crushing the employee's right pinky finger and resulting in an amputation down to the first knuckle.",0
"At 1:00 p.m. on January 13, 2021, a commercial driver was loading a machine and securing it to a deck. The deck was angled, and when he stood up he lost his balance and fell 4 feet to the pavement. He suffered a broken forearm and was hospitalized.",1
"An employee was removing the straps from a crate (containing a boat motor) on a trailer. When the straps were removed, the crate fell onto the employee and broke his right leg and jaw.",1
An employee was performing lubrication tasks. His left hand came into contact with a moving belt conveyor and his ring fingertip was amputated.,0
An employee was adjusting the band in a band saw after repair when the blade amputated their left index finger.,0
"The injured employee was operating a hot press along with a coworker when the employee's hand was caught in the press, resulting in a broken hand that required surgery.",1
"While retrieving merchandise from a freezer, an employee's foot got caught on shrink wrap on a pallet, causing the employee to fall to the ground and fracture a hip.",1
"An employee was oiling a sprocket gear when the tip of the oil can got caught in the sprocket, pulling the employee's hand into the sprocket and resulting in lacerations to two fingers.",1
An employee tripped over a parking space stop in a parking lot. The employee fell to the ground and suffered lacerations to the back of the head.,1
"Employees were replacing a patio door on a second floor. As one of the employees approached the door opening, he stumbled and fell through the opening and off the side of the deck. He landed on the ground 12 feet below and suffered broken ribs. The deck did not have a guardrail at the time.",1
"An employee was doing framing work. He tried to grab another employee who slipped and fell when he fell from the roof himself, landing about 15 feet below and suffering four fractured ribs, and fractures to a thumb, foot, and part of his face next to the nose.",1
"An employee was removing plastic elevator buckets from the tops of pallets of empty tote bags. As the employee came down from the pallets (42 inches off the floor), his foot caught the edge of a pallet and he fell to the concrete floor on his left side, with a bucket under him. The employee sustained a lacerated kidney and was hospitalized.",1
"On 1/13/2021 at 7:20 a.m., an employee was using a crane to set a concrete structure down onto lumber. As the employee reached underneath the concrete structure to adjust the lumber, a button on the crane was pressed, causing the concrete structure to come down and crush the employee's right hand.",1
"An employee was performing demolition on an interior wall. As the employee was walking away from the wall, it collapsed and partially buried him, resulting in injuries to his head and neck, and potentially a collapsed lung.",1
"An employee tripped over a box of fluorescent light bulbs while exiting a maintenance closet. She fell to the ground, injuring her right hip.",1
An employee was trying to adjust a chain and sprocket that was out of alignment and causing issues with the conveyor system. The conveyor system was engaged and the employee's fingers were caught between the chain and sprocket causing the amputation of his left index and middle fingers.,0
"An employee was driving to a charging station in a stand-up forklift. The forklift slid in oil, and the employee's left foot was caught between the forklift and the charging station. His heel was broken and lacerated.",1
An employee suffered an avulsion injury caused by a cable and pulley in a jammed cutting device. The fingertip was medically amputated.,0
"An employee was placing cardboard into a compactor and dropped a piece of cardboard on the ground. When the employee turned to pick up the cardboard, he slipped on the carboard and landed on his right knee, resulting in a knee joint fracture.",1
An employee was cleaning the whitener system in a rice refinery machine. The system's blades amputated his right index and middle fingertips.,0
"An employee was removing a piece of cardboard from a pallet of material when they tripped over a pallet and fell, striking their arm on the ground and suffering a concussion and a loss of consciousness.",1
"While replacing a venomous snake's water bowl, the snake struck an employee from the opposite side of the exhibit and bit their finger.",1
"An employee tripped and fell while cleaning tables, striking a table and suffering a shoulder dislocation. She was hospitalized.",1
"As a forklift operator was adjusting a plate that was loaded onto a truck when the forklift struck another employee in the leg, resulting in a possible broken leg.",1
"At 9:40 a.m. on January 13, 2021, an employee was going up a tube between the beltcore. While he was doing so, a square tube slipped out. His left middle finger was pinned between the beltcore and the square tube. The finger was amputated and he was hospitalized.",1
Two employees were riding a lift from a basement to the first floor of a home. A chain link broke and the lift fell about 6 feet back into the basement. One employee suffered a broken ankle.,1
"An employee was moving a crate of milk when it fell on his foot, lacerating it. The wound became infected and he was hospitalized.",1
An employee moved the accumulator sled of a yarn machine in order to access the yarn when she suffered the amputation of her right ring finger.,0
"An employee pulled on a conveyor belt to adjust it, and his left little finger was caught between the belt and a roller. The fingertip was amputated.",0
"An employee was reaching for supplies in the supply room when she tripped over a box and fell, sustaining a fracture to her right leg that required hospitalization and surgery.",1
"An employee fell off a scaffold, suffering a broken collarbone and ribs.",1
"An employee was pulling a metal basket using rigging and a backhoe when a nylon sling broke and struck the employee in the shoulder, resulting in a fractured right scapula.",1
"An employee was loading a trailer. As the trailer flap was being lowered, it dropped and hit his big toe, injuring it. The toe was medically amputated.",0
"An employee was loading a pole onto a trailer when their hand got caught between the pole and the trailer, resulting in two crushed fingers.",1
"An employee was replacing a conveyor belt when his finger got caught between the belt and a roller, resulting in an amputation of the tip of his ring finger.",0
"An employee was replacing a steel sump cover and the cover flexed upon being released into position, causing the employee's finger to become pinched between the cover and concrete and resulting in a partial finger amputation.",0
"Employees were conducting warranty repair on a residential sidewalk. A skid steer was being used to remove dirt while a section of sidewalk was repaired. A heavy clod of dirt from the skid steer struck one of the employees, breaking the employee's left leg.",1
"An employee was applying grease to a drive chain when his finger became caught between the chain and the sprocket, resulting in a fingertip amputation.",0
A temporary employee attempted to retriever a push stick from inside a baler when the baler cycled and partially amputated a finger.,0
"An employee was driving a golf cart. A tractor struck the cart, and the employee's left leg was pinned between the two.",1
"An employee began to fall from a ladder when he reached out to grab a metal stud. His fingers got caught in a hole in the metal stud, resulting in amputation of two of his fingertips.",0
"An employee was guiding an airplane into a hangar when he tripped on a 4x4 post and fell onto a metal pallet, resulting in seven cracked ribs and internal bleeding on his left side. The employee was hospitalized for surgery.",1
"An employee was walking near a door when they were struck by a forklift that was backing out of the door, resulting in injuries to their ankle and foot.",1
An employee was assembling a window on a glazing table. His right little fingertip was pinched between two metal guide bars that met at a 90-degree angle. The fingertip was amputated.,0
"An employee was standing on a 6-foot ladder while installing light fixtures on a third-floor balcony when he fell three stories from the ladder to the ground floor, resulting in broken ribs and a punctured lung.",1
"An employee was operating a rotary die cutter when he fell onto containerboard on the floor, resulting in a fractured leg that required hospitalization and surgery.",1
"On January 14, 2021, an employee was moving toward a hallway junction to re-position an exit sign post when he turned around and tripped, falling to the ground. The employee suffered a dislocated shoulder and fractured right hip that required hospitalization.",1
"An employee was kneeling down next to a coil of steel that was going through a straightener. When the employee stood up, the edge of the coil struck and lacerated the employee's forehead.",1
"An employee was assisting a hydraulic pump operator in positioning steel plates between the underside of a bridge and its support structure when the employee's right hand got caught between two steel plates, resulting in a cut on his middle finger and an amputation of his index finger to the first knuckle.",1
"An employee was demonstrating the procedure for attaching a disk tiller to a tractor. The tractor backed up suddenly and pinned the employee against the disk tiller. The employee suffered a skull fracture with brain swelling, a collapsed lung, and broken ribs.",1
"An employee was walking under an aerial lift when they were struck by a box full of materials that fell from the lift, resulting in a concussion and brain bleeding.",1
"After connecting a lowboy to an excavator bucket with a chain, an employee began raising the excavator bucket. The chain hook (attached to a beam in the lowboy) snapped, hitting the employee in the face and knocking him unconscious.",1
An employee was using a pipe groover to groove 10-inch steel pipes. He stopped the machine and was adjusting the groove depth when the machine activated again and pulled in the fingers on his left hand. All four fingers were amputated up to the middle joint.,0
"An employee was attempting to unjam a pusher bar that was caught on a metal guard. When the pusher bar was freed it slid onto the employee's left ring finger, resulting in a partial amputation.",0
"An employee was using a pressure washer to wash a machine. He turned it off, but it reactivated. The hose went out of control and sprayed water on his neck, chin, and face. He suffered a cut to the face.",1
"An employee was using a hoist to lower the lid of a center drain mold onto the mold body. The employee stepped back from the production platform onto the mold mount to try and gain better control of the lid when he fell and struck his torso on the side of the platform. The employee suffered fractured ribs and a bruised lung and torso, requiring hospitalization.",1
"An employee was taping drywall from a small scaffold. The employee fell from the scaffold to the ground about 3 feet below. The employee's head struck the ground, causing a possible concussion.",1
"An employee was taking the straps off of a 1'x31' bundle of steel tubing on a crane when the bundle fell on his left foot, resulting in a hospitalization and a fractured left foot.",1
"An employee was working on the second floor of a new residential building that was under construction when they fell approximately 12 feet through an open hole in the floor, resulting in a deep laceration on their head and a concussion.",1
"An employee was offloading propane from a truck into a large tank. When the employee removed a hose, a spark caused the propane to catch fire, resulting in second degree burns to the employee's face and neck.",1
"An employee was disconnecting a hose from a portable transfer pump when residual sulfuric acid sprayed out of the hose and contacted the employee, resulting in chemical burns to both legs from the thighs to below the knees that required hospitalization. Personal protective equipment was worn at the time of the incident.",1
"An employee was involved in an altercation with another passenger while exiting a flight at the airport. The employee sustained a fractured skull, bleeding on the brain and 3 lost teeth.",1
An employee was checking the suspension under a trailer. The trailer backed over him and broke his hip.,1
"An employee got out of his truck and walked to the back of its trailer when he was pinned between the trailer and 28-foot truck, resulting in injuries to his pancreas and liver.",1
"On January 15, 2021, an employee pulled a machine's exit conveyor away from the machine while attempting to unjam plastic from behind the blade of the machine. The blade amputated the employee's left index finger to the second knuckle. The machine was not locked out at the time of the incident.",1
"An employee slipped in standing water and fell to the ground, suffering a broken femur.",1
"An employee was starting a generator by pulling a drawstring with a piece of wood attached to it when the drawstring was sucked back into the engine. The piece of wood struck the employee's left ring finger, resulting in amputation.",0
"An employee was standing on top of a ladder to scan bins on the top shelf. As the employee descended the ladder, her leg became caught between the ladder's steps, causing her to twist her right knee and resulting in a knee fracture.",1
"An employee was climbing a ladder to a second floor. The ladder slipped out from under him and he fell to the ground, breaking his ankle.",1
"An employee was positioning a shim under the corner of piece of equipment being lifted by a 10-ton hydraulic jack. The jack kicked out, causing the shim to kick out and crush the employee's right thumb and index finger. The index fingertip was amputated.",1
An employee was removing a brake chamber from a tractor. The spring released the pressure and his finger was crushed between the brake chamber and the axle housing. The employee sustained a fracture and a partial amputation of the fingertip.,0
"An employee was getting ready to compact dirt using a compactor when a skid steer backed into him, pinching his right leg between the compactor and the skid steer and resulting in a lower leg fracture that required surgery.",1
"An employee was using an acetylene/oxygen torch to cut bad wire off a spool when sparks from the process ignited the employee's shirt, resulting in burns to the employee's skin that required hospitalization.",1
"On January 15, 2021, an employee had just adjusted a coil module on an insertion press when the press cycled. It caught the employee's right index fingertip, causing a partial amputation.",0
An employee slipped and fell backward from a flatbed truck. His head struck the ground. He was hospitalized.,1
"On January 15, 2021, an employee was pushing a bed plate (for a textile production line's needle loom) into place. The bed slid in quickly, and his finger was caught in a shear point between it and a mounting bracket. He suffered a partial amputation to the finger.",0
"On January 15, 2021, an employee was operating a press when it was having difficulty coming down. A maintenance employee was dispatched and came to look at the press. The maintenance employee was in the back of the press and cycled the press as the other employee was in front of the press with her hands on the part. As the press cycled, it partially amputated her right thumb and caused crushing injuries to the hand.",0
"A resort employee was skiing down a mountain at the end of work. A guest coming down another run collided with the employee, causing chest contusions and injuries to the head and neck.",1
An employee was installing an arm on a crossbar. The employee crouched down to get the pin that would lock the arm in position. The arm fell and severed the employee's left thumb.,0
"An employee was operating a meat grinder. As the machine was in the process of stopping, the employee reached in to get a piece of meat and the grinder blade amputated the employee's index fingertip.",0
"A metal shot blaster's door closed on an employee's left middle and ring fingers. The middle finger was amputated from the nailbed down and the ring finger was lacerated, requiring stitches.",0
"An employee was inspecting a non-functioning garage door. The employee pulled the emergency garage door release pull cord while standing on the third step of a ladder; the cord snapped back and the employee fell to the concrete floor, his left side striking a box that contained a pointed object. He suffered seven broken ribs, a broken scapula, and a collapsed lung.",1
Two employees were performing maintenance on a jammed manual lift elevator door. The door dislodged and an employee's hand was pulled into the spring bindings connected to the door. Skin was amputated from the employee's left index finger.,0
"On January 16, 2021, an employee and a coworker were troubleshooting feed issues with the planer mill strapper. While the injured employee was placing the pin in the bump gate to check the banding track for alignment issues, the co-worker started locking out the strapper and lowered the bump gate. Stored energy pinched and amputated the injured employee's right middle finger between the gate and the pin.",0
An employee slipped while moving from a roof to an extension ladder. The employee fell to the ground 20 feet below and suffered a broken back.,1
"An employee was scraping concrete from a form. As he tried to lift a panel with an overhead crane, his finger was caught between the panel and the chain of the lift. The finger was crushed and the fingertip was fractured. The fingertip was later medically amputated.",1
"An employee was servicing a yogurt filler. A valve closed on his finger, pinching the fingertip and causing an amputation at the nailbed.",1
"An employee filled a 55-gallon trash can with chemicals for cleaning and attempted to move the trash can when the liquid splashed. As the employee attempted to avoid the liquid, he tripped and liquid splashed onto him, resulting in chemical burns on the right side of his torso.",1
"An employee was releasing a stuck safety latch mechanism on an automotive lift. The lift lowered, catching the employee's finger in the mechanism and causing an amputation.",0
"An employee was doing a live broadcast at a car wash when she tripped on a cement junction box and fell to the ground. The employee sustained a nosebleed, a small cut on her nose, and a broken elbow.",1
"An employee was walking from the sales floor to the administrative area when she fell to the floor. The employee sustained a broken femur and injuries to her kneecap, requiring hospitalization and surgery.",1
"On 1/17/2021, an employee and a contractor were moving a part from a truck to a dock area when the employee felt pain in his lower back and sat down to see if the pain would ease. When the employee tried to rise, he could not straighten his back and was admitted to the hospital.",1
An employee was using a lashing pole to remove a twist lock from the top of a container on a vessel. The twist lock fell and struck the employee's hard hat. The employee suffered a fractured skull and was hospitalized.,1
"During a road shoulder sweeping operation, an employee was walking to get into a debris truck when an SUV drove onto the shoulder and struck the truck on the driver's side. The employee was between the truck and a concrete barrier and suffered a broken leg and a head laceration.",1
"An employee attempted to place a dog collar onto the neck of a customer's dog when the dog bit the employee on the arm, resulting in hospitalization due to an infection.",1
"An employee was checking a box on a shelf while elevated on a scissor lift when he fell out of the lift approximately 9 feet to the ground, resulting in a fractured left elbow.",1
"Employees were preparing to lift a fabricated track, made of angle iron, off a floor. When it was lifted, the load shifted and struck an employee on the backs of the legs as he turned to get away. He suffered contusions and was hospitalized.",1
"Employees were stacking two different types of trusses in a yard. One employee was lifting one end of a truss with a forklift while another inserted a spreader block. The load shifted, and the second employee's left ring finger was pinched between the block and the trusses. The finger was amputated.",0
An employee was stepping out of a structure onto a step when he suffered a back injury.,1
An employee was making parts on a punch press. The tooling on the press caught two of the employee's fingers and crushed them. The employee suffered a partial amputation to both fingers.,0
"An employee and a coworker were lifting a roof curb to place it on a forklift when the employee's finger was caught in a pinch point, resulting in an injury that required surgery.",1
"A temporary employee was helping other employees separate bins that were stacked together. When a bin was separated from the stack and slid forward, the employee's right ring finger was pinched between the lip of the bin he was pulling out and the bottom edge of the bin that had already been moved from the stack. The fingertip was crushed and lacerated, and had to be medically amputated.",0
An employee was assisting a mini-loader operator with moving equipment. The mini-loader's forks were lowered onto the employee's right foot resulting in a fractured big toe.,1
"An employee was removing a bottle that was stuck on the production line when his right pinky finger was caught between the conveyer belt and a pole that directs the bottles to the filling station, resulting in amputation.",0
An employee and a coworker were in the process of de-boarding a crane onto the runway platform when the employee was pinned between the crane cab and the runway handrail. The employee sustained a right hip joint fracture.,1
"An employee was helping to load empty 500-gallon water troughs from a forklift onto a customer's flatbed trailer. The water troughs slid from the forklift, fell onto the employee, and knocked him to the ground, resulting in shoulder and back injuries and a spinal cord contusion.",1
"An employee was opening a blast cooler door. His left index finger was caught between the railing along the wall and the door handle, resulting in an amputation at the first knuckle.",0
"An employee was melting solid plastic to unclog a plug pipe when melted plastic shot out of the pipe and landed between the employee's glove and hot suit, causing third-degree burns.",1
"An employee was using a pry bar to adjust a dryer basket in a fixture. The employee's left ring finger was caught between the fixture and the basket, and the fingertip was amputated.",0
"An employee was using a motor-driven lift to raise a tank of chicken to dump into another machine. The chain being turned by the motor misfed and stopped the lift, causing the motor to shake and loosen the bolts that anchored it to its housing. The employee lowered the tank, reset it on the lift, and began to raise it again when the motor fell approximately 10 feet from its housing and struck the employee's right forearm, resulting in a fracture and laceration.",1
"An employee fell from a 12-foot ladder, suffering a head injury and brain swelling.",1
Cinderblocks fell out of the back of a truck and struck an employee in the head. The employee suffered a concussion and head lacerations.,1
"An employee slipped and fell in a parking lot, landing on his back and injuring his back and both legs.",1
"An employee was tending to an electrical pole when slack in the rope caused the pole to fall to the ground, bounce, and strike the employee in his left leg, resulting in a fracture.",1
A driver was walking from a truck to a shipping office when he slipped on black ice and fell to the ground. He suffered a broken left ankle.,1
"On January 18, 2021, an employee was working on the top of a 5-foot scaffold when the scaffold started to move. The employee fell, landing on a concrete slab and suffering a broken left femur. He was hospitalized.",1
"An employee fell from a ladder to the floor, suffering a head injury as well as a left-foot injury that caused the amputation of a toe.",1
"An employee was attempting to roll a 1,300-pound coil that was 3 inches wide and 4 feet high when the coil fell on the employee's left ankle, causing broken bones and lacerations.",1
"A log broke through the window of a crane, hitting the operator in the head. The operator suffered severe head trauma.",1
"An employee fell to a concrete floor. The employee's head struck the concrete, causing a laceration over the left eyebrow and a bloody nose.",1
"An employee was walking in a material storage area when he tripped over a wire mesh panel and fell to the ground, resulting in a broken left femur.",1
"An employee attempted to jack up an appliance to make adjustments to the legs when the jack slipped, resulting in a fingertip amputation.",0
An employee was chopping tomatoes when her chef's knife cut off her left thumb tip.,0
An employee was cleaning snow off a box truck from a rolling staircase. The employee fell to the ground and suffered a head injury.,1
"An employee was operating a forklift and struck a yellow safety pole, resulting in a back injury.",1
"An employee was attempting to push a drill bit back into the drill chuck when the chuck grabbed the employee's glove and twisted the end of the employee's glove along with his left index finger, resulting in a fingertip amputation.",0
"An employee was on a dock placing a seal on the doors of a truck trailer when the truck pulled away from the dock, causing the employee to fall 3 feet to the ground below and fracture his right shoulder.",1
"An employee was on a 15-foot ladder, removing wall paper. The employee fell through the ladder rungs and landed on the floor, suffering two broken heels and a broken left ankle.",1
"An employee was climbing up the side of a railcar using the fixed ladder when he fell approximately 13 feet to the ground, resulting in a broken vertebrae in his back.",1
"On January 19, 2021, an employee was loosening the nut on an auger retention bolt with his right hand while supporting himself with his left hand against a drilling machine when a bar on the machine came down and pinned his hand. His hand became caught and he suffered the amputation of his left thumb and ring finger.",0
"On January 19, 2021, an employee was attempting to pick up a boring bar that fell out of place when the bottom part of the machine slid out to take the bar into the storage rack, causing the employee's leg to be caught in the carriage rail. The employee was hospitalized.",1
"An employee was moving a cadaver on a gurney. The gurney collapsed and struck the employee's left leg, causing the employee to fall. The employee suffered a broken left leg, as well as head lacerations from the fall.",1
"An employee was monitoring a foundry with molten metals inside when a tree was introduced into the foundry, causing an eruption of molten metal. The employee tried to rapidly leave the area but tripped and fell to the ground. The erupted molten metal landed on the employee causing burns of different degrees to their face and head.",1
An employee was loading blanks into a hydraulic press when two fingers on their left hand were caught in the press and amputated.,1
"An employee was cutting down a tree. It started to fall, then struck him as he ran away. He suffered three broken ribs in the lower back, a bruised heart, and blood in the lungs.",1
"On or about January 19, 2021, an employee was working on an in-ground junction box behind an electric fence. The fence shocked him. After his shift, he became ill and was hospitalized.",1
An employee was cutting the wing on a turkey. His knife slipped and lacerated his right thigh.,1
An employee was taking a panel from a conveyor when a chain popped off the track. A sprocket caught his hand and wedged it between the chain and UHMW (ultra high molecular weight polyethylene). The employee suffered two fingertip amputations on his right-hand.,0
"An employee was walking back to his office when a forklift struck him as he was turning right into an aisle, resulting in a broken left leg and ankle.",1
"An employee was operating a drill press when their glove got caught in the drill, resulting in an amputation of the left pinky finger.",0
An employee suffered back strain while picking and packing orders in a warehouse.,1
An employee was pushing a three-shelf rolling plastic cart. The cart hit a crack in the concrete and tumbled; the employee fell to the concrete floor. She suffered severe pain in the hip and upper leg.,1
"An employee was walking to the end of a resident's bed to use the controls for a lift when her feet got tangled with the cord for the air mattress pump, causing a trip and fall. The employee suffered a broken right hip that required surgery.",1
"At about 9:15 p.m. on January 19, 2021, an employee was on a fixed ladder that was attached to an injection molding machine. The fixed ladder and platform detached from the machine, and it and the employee fell to the floor. The employee suffered a head injury.",1
"An employee was fitting a phalange plate to a web truss when the plate slipped, crushing the employee's left arm.",1
"An employee was walking through a basement when he became entangled in a pull wire on the floor, causing him to fall onto the concrete floor. The employee was hospitalized for a fractured left elbow that required surgery.",1
"The injured employee was on the floor transferring boxes from one pallet located on
the floor to another pallet located on the forks of his parked forklift. Another forklift operator was picking up boxes in close proximity to the injured employee. A third forklift operator maneuvered his forklift forward toward the injured employee's parked forklift pushing it slightly a few inches. The injured employee was caught between the two pallets and suffered abrasions and contusions to his legs, chest, and arms.",1
"An employee was climbing up onto a trailer. The employee slipped on a step and fell to the ground, suffering broken ribs and an injured back.",1
"An employee was removing packaging supplies from a vertical reciprocating conveyor (VRC) or full-size freight elevator lift box. The two master links that connect the chains on each side of the gate to the counterweights failed and the inner door/gate fell down onto the employee and knocked her down to the ground. The door then bounced back up and came down onto the employee's leg. The employee sustained a fractured tibia and fibula, compression fractures to vertebrae, and a collapsed lung.",1
"An employee was reassembling the screen support roller onto a pillow block. He connected the left side to the pillow block and then went to ensure that the right side of the pillow block was still connected. While doing so, the left side of the roller fell back out, pinching his finger between the roller and the support angle bracket and causing a laceration to the ring finger.",1
An employee was repairing a truck. An axle on the truck pinched the employee's finger.,1
"On January 19, 2021, an employee fell from a ladder. The employee's right hand fell into the moving gear of a machine, resulting in the amputation of the ring and little fingers.",1
"An employee was transitioning from a roof to a ladder. The ladder fell out from under him and he fell to the ground about 16 feet below, suffering a broken left tibia and fibula.",1
"An employee slipped and fell on ice in a driveway. The employee's leg was broken in two places, requiring surgery.",1
"An employee was stacking plastic bags and staging them to lift off a transfer table. When the employee lifted a stack of bags, her right pinky finger was pinched by a transfer belt, resulting in a partial amputation of her fingertip (without bone loss).",0
An employee was standing near an oscillator unit while maintenance was being performed on it. The oscillator's belt made a forward motion and the employee's left hand was pinched between the belt and the belt wheel. The employee suffered a hand laceration and amputation of the left middle finger to the first knuckle.,0
Two employees were in a fist fight when one of them broke a bone in the other's face. The injured employee was hospitalized.,1
"An employee was polishing an aluminum pipe in a lathe with an emery cloth when his glove got caught in the lathe chuck, pulling him into the lathe. The employee suffered fractures to his left arm above the wrist, a laceration on his left ear, and an amputation of his left thumb.",0
"An employee was operating a two-hand actuated press when their hand was crushed by the press, resulting in amputation of their right index finger at the first joint.",0
"While inspecting a portable dumpster, an employee climbed up the side of the dumpster using rungs that were integrated into the exterior frame of the dumpster. As he climbed the ladder, he fell backward approximately 2 feet to the ground, resulting in possible damage to his 5th and 6th vertebrae.",1
"An employee was operating a stand-up forklift. Its cage crushed his left hand against a nearby storage rack, degloving the thumb and crushing the fingers.",1
"An employee was opening a box containing glass. The glass slipped and struck his left leg, breaking it.",1
"An employee was walking on the cargo trailer with a back ramp, slipped on the icy surface, and fell breaking their right leg.",1
An employee was pulling a cart. She turned a corner and was straightening the cart on the right when her left hand was smashed between the cart and a metal post. The little fingertip was smashed and had to be amputated.,0
"On January 20, 2021, an employee was walking from the stock room back to the cashier area when she tripped over a box that was on the floor and fell to the ground, resulting in hospitalization due to a fractured left hip.",1
"An employee jumped from an out-of-control stand-up forklift. His left leg was pinned against racking, causing an open fracture to the left ankle.",1
"An employee slipped on ice while walking around a concrete truck, fell, and suffered a broken lower left leg.",1
"An employee was on a ladder re-installing a shaft assembly and bolting it to a polisher machine. As the employee was retrieving the bolts from his pocket, the rigging point on the shaft failed and struck the ladder causing it to tip over.  The employee fell backwards off the ladder onto the ground and the shaft assembly struck his right lower leg. The employee suffered an impact injury to their lower right leg and a back injury from the fall to the floor.",1
Two maintenance employees were reattaching a butterfly valve between two 6-inch diameter pipes with flanges. The gap between the pipes was not aligning correctly. One employee used a pry bar to lift the flanges while the other employee tried positioning the valve. The pry bar slipped and caused the flanges to fall on the employee's right hand. The employee suffered a crushed right finger and an amputation to the tip of the little finger. The ring finger was later amputated during surgery.,0
"When an employee released the ears from a transfer hose connection, a mixture of hot water and caustic soda was released from the hose and burned the employee's left thigh and hand.",1
"On 1/20/2021, an employee was unloading a box truck with a pallet jack when he slipped on ice and struck his knee on the pallet jack. The employee suffered muscle detachment from his kneecap that requires surgery.",1
"An employee was cutting open a 55-gallon empty brake cleaner drum with a right angle grinder when sparks ignited residual flammable material in the drum, causing flash flames and second degree burns to the employee's chest and arms.",1
"An employee was walking near the entry of a building when she slipped, fell, and struck her head. She was hospitalized.",1
An employee was removing snow on the second floor of a framed house. The employee fell from an edge to ground level. Suffering two broken wrists and a broken rib.,1
"An employee was transporting a rack of meat (weighing 900 to 1,300 pounds) on a cooler. He slipped on an incline, and the meat rack crushed his left hand against a concrete pole. His ring and little fingers were amputated.",1
An employee was pushing a pallet jack with an empty gaylord box on top.  The employee suffered a back injury and fell.,1
"On January 21, 2021, an employee was using a baler machine when his hand was caught in the machine and severely lacerated.",1
"An employee was driving a reach truck in a shipping warehouse. The truck struck a forklift as it was lowering its forks, and the forks entered the truck's operator compartment and broke the employee's lower leg.",1
An employee's right index finger was amputated when it was caught in a closing pedestrian door.,1
An employee was cutting bone on lamb chops. The cutting blade amputated the end of the employee's right index finger at the second knuckle.,0
"An employee was working at a convenience store when an armed assailant entered the store, held the employee at gunpoint, made her open the registers, and left. The employee was not physically harmed, but was hospitalized due to the traumatic situation.",1
An employee was boring a hole in a coupling on a lathe and amputated his right middle fingertip just above the fingernail.,0
"An employee was approaching a debris pile in a skid steer. A piece of debris (containing brick, cement, and rebar) was thrown into the pile from the second floor and struck the employee's left leg. He suffered fractures to the lower leg and was hospitalized.",1
"An employee was removing defective balloons from a conveyor belt when the employee's gloved hand, and then hair, were caught by the conveyor belt rollers. The employee's right arm was broken in two places.",1
An employee was shaving a dog in preparation for a medical procedure when the dog bit the employee's right hand. The employee was hospitalized.,1
"An employee was walking around jet bridge stairs to search and clean an aircraft. He slipped on snow-covered ice and fell to the ground, injuring his head.",1
An employee unwrapping the shrink wrap from a pallet stack. A reach truck ran over his right foot.,1
"An employee was cutting cilantro with a chef's knife when the knife slipped, bouncing off of the employee's gloves and lacerating the employee's wrist.",1
An employee was operating a poly packaging machine when the machine jammed. The employee was unclogging the jam when the machine cycled and the jaws closed. His hand contacted the serrated blade and caused the amputation of the pad on his left thumb.,0
An employee was attaching forks to a forklift when the forks dislodged and fell on the employee's foot. The employee sustained a fractured right big toe and a puncture to the right foot.,1
"On January 21, 2021, tripped on a monitoring cord while walking across an operating room. The employee fell to the floor, suffering a broken left femur and a dislocated right shoulder.",1
"An employee was climbing a ladder in order to install a solar panel. Rungs from the ladder broke, causing the employee to fall to the ground and sustain arm and shoulder injuries.",1
"An employee was using an air hose at the company's fueling station to fill a co-worker's bicycle tires. The employee was bent over in front of a pickup truck while filling the tires. The pickup moved forward, striking the employee and causing a compound fracture to his left leg.",1
An employee was resurfacing a tool on a milling machine. The machine bit caught his right-hand glove and pulled in his ring finger. The finger was amputated at the second knuckle.,0
"An employee was installing a sheet metal roof. The employee stepped on a section of the sheet metal roof and it gave way, causing the employee to fall 15 feet to the ground. The employee sustained a brain hemorrhage, severe facial fractures, a rib fracture, and a punctured lung.",1
"The injured employee was assisting the blasting machine operator at the exit end of the machine. After a piece of steel exited the machine, the employee was brushing some blasting media back into the machine when his hand was crushed between the roller and the piece of steel, resulting in the amputation of a fingertip.",0
"An employee was operating a ride-along pallet jack on a workroom floor. During a turn, the employee's right foot was caught between the pallet jack and a wall railing. Two of her toes were broken.",1
"On January 21, 2021, an apprentice pipe fitter was making sure that the facing machine's blades were set properly when a clamp on the machine loosened, pinching the employee's right thumb and resulting in an amputation to the tip of his thumb without bone loss.",0
"An employee was operating a double pallet jack in a warehouse. When he stopped the pallet jack, a swing reach forklift struck it. He was thrown from the pallet jack, landing on the concrete floor on his right side. He suffered a head injury and a broken right femur.",1
"An employee was loading cardboard into the baler. The baler door closed on the employee's finger, causing an amputation of the left middle fingertip.",0
"On January 21, 2021, a machine that is used to apply an adhesive to the back of solar panels became jammed. An employee attempted to pull the product from the jammed machine when hot adhesive sprayed out of the machine onto the employee's neck and hand, burning the employee.",1
An employee was moving cattle from pen to pen in a barn. A steer became agitated and head-butted the employee's upper right thigh. The employee suffered a contusion and swelling to the thigh.,1
"An employee was loading garage doors on a flatbed truck. A stack of garage door sections (about 7 feet high) fell onto the employee, causing three fractures in the leg and ankle.",1
"An employee was stacking lumber from a conveyor. The employee's glove came into contact with the conveyor's chain and sprocket, causing the amputation of the employee's right ring fingertip.",0
An employee was cutting film on a machine in order to release air bubbles when the employee's right hand was caught in the machine's rollers. The employee sustained a lacerated right hand that required surgery.,1
An employee was driving an electric pallet jack down an aisle. The pallet jack collided with a moving stand-up forklift and the employee suffered fractures to fingers on their right hand.,1
"An employee was walking in an office, lost balance, and fell resulting in a hip injury.",1
Two employees were trying to replace a pressure relief valve in a hot water system. Hot water was released and caused first- and second-degree burns to one employee's torso.,1
"An employee was climbing a 20-foot extension ladder and fell to the ground about 10 feet below, suffering a dislocated shoulder and a fracture.",1
"An employee was working inside the hub of a wind turbine, tightening bolts for the fan blades, when he suffered a crushing injury from an accumulator. His hip was broken and he was hospitalized.",1
An employee collided with another skier and sustained four broken ribs.,1
"An employee was using a table saw to cut wood pieces. The saw caught his left hand, amputating his left index and middle fingers and almost removing the ring finger. All three fingers were ultimately amputated.",0
"At about 8:15 p.m., a customer who had been told to leave a mall attacked a security guard. A second guard came over to help and the customer punched her and then kicked her in the head, arm, and back. The second guard was hospitalized, having suffered a concussion and a fractured humerus.",1
"An employee was troubleshooting the slide gate valve at the top of a materials silo. As the employee was reviewing the operation of the valve, the valve actuated and pinched his left thumb, resulting in a partial amputation.",0
"An employee was operating a trimming machine. The employee placed his foot on the machine in order to activate the photo eye and his pant leg got caught in the machine, causing a laceration to his right heel.",1
An employee was spraying lubricant on a machine. The machine pulled the employee's finger in and caused an amputation to the finger.,1
"An employee was working on a pump when their finger got caught between a mechanism and its housing, resulting in a fingernail loss and a fingertip amputation.",0
"An employee was climbing up stacked totes. When she grabbed the tote above her (which was empty), it shifted and she fell. The empty tote fell with her and hit her in the left leg. She suffered a broken right heel and a broken left femur.",1
An employee was descending a scissor lift when his finger got caught on the latch of the scissor lift. The employee sustained an amputation to the left ring fingertip.,1
An employee was lubricating a window punch machine. The machine activated and amputated the tip of his index finger.,0
An employee suffered a contusion to the back of the head. He was hospitalized.,1
"An employee was unloading angle iron from a flatbed trailer located inside the facility. While traversing the trailer, the employee's foot was caught on a piece of angle iron on the trailer floor, causing the employee to fall approximately 4 feet from the trailer to the concrete floor. The employee's head contacted the floor, resulting in a head injury.",1
"An employee was watching a front-end loader scrape frozen aggregate from a sidewalk. After the front-end loader had made a pass, the employee moved towards the sidewalk to begin melting frozen aggregate with a torch. The front-end loader began to make another pass of the sidewalk, causing the loader bucket to swing and strike the employee. The employee was hospitalized with a concussion and a strained neck.",1
"An employee was moving merchandise in the receiving area of the store. Another employee was moving a cart and it collapsed on the injured employee, resulting in fractures to thoracic and lumbar vertebrae.",1
"An employee was blending bulk vitamins when the employee's middle finger contacted the platform alignment hinge, resulting in a severed middle fingertip.",0
"An employee was unjamming a mail sorting machine when it started up. The employee's left hand was caught between a conveyor belt and a roller, and bones in the hand were broken.",1
An employee was adjusting a packaging machine and contacted a pressure belt resulting in a pinky fingertip amputation.,0
An employee suffered an abdominal injury while shoveling soap stock into a drain. He was hospitalized.,1
An employee was lifting and stacking fifty 44-pound lab reagent boxes. The employee experienced a subarachnoid bleed.,1
"A mechanic was troubleshooting an electrical issue with a machine that was causing trouble with startup and stopping. At the same time, another employee was cleaning the machine rolls. The roller plates started up and caught the mechanic's left middle and index fingers between the rollers, resulting in amputation injuries to the fingers.",0
"Two employees were removing a sheave cover on a 310-ton crane in order to reeve the hook block. The hook block was located on stands 7-8 feet above the ground. One employee was removing a sheave cover from above while the other was removing bolts from below. The employee below was struck by the sheave cover and sustained fractured vertebrae, a fractured right ankle, an injury to the ACL and patella on the left knee, as well as a dislocated hip.",1
"An employee was breaking a piece of a brick wall with an electric hammer. The wall collapsed and fell on the employee, who suffered a dislocated hip and a broken rib.",1
"A rigging hook had just been unhooked from a pipe that a crane had lowered. While the crane's cables were being raised, the hook caught onto the racking that was bracing the pipes. The tip of the hook broke off and struck an employee in the jaw, lacerating and possibly breaking it.",1
"An employee was loading carts when he fell to the concrete ground, suffering fractures to the hip, knee, and tibia.",1
"On 1/23/2021, at approximately 12:30 PM, an employee was operating a powered industrial truck (PIT). While turning right into an aisle, the PIT struck a 4-foot high metal bollard. The employee's left foot was caught under the main cabin of the PIT and his left ankle was against the bollard. The employee was hospitalized with a fractured left heel.",1
"The sampling door on a smokehouse was closed on an employee's right middle finger, causing a partial fingertip amputation.",0
"An employee was walking from a hospital to a parking garage when they slipped and fell on a sidewalk, resulting in a fractured tibia. Freezing rain was present during the incident.",1
"Two employees were preparing to change out a saw blade on a saw. The still moving belt pulled in one employee's right hand, crushing the knuckle of their index finger.",1
An employee was feeding fabric into a fabric insert machine. The machine caught her finger and amputated it.,0
An employee was shocked while replacing a can light fixture. The employee suffered a burn to the hand and a shoulder sprain.,1
"An employee was walking on a catwalk above a stage and seating area. A section of catwalk grating became dislodged, causing the employee and the grating section to fall. The employee struck the floor about 20 feet below and suffered fractures to the right arm, right leg, right ankle, and hips/pelvis.",1
An employee was walking around the building when he fell to the ground and broke his femur.,1
A maintenance employee was supporting a machine component by hand while another associate loosened mounting fasteners. The cooling fan blades partially amputated the injured employee's left middle finger (third distal phalanx with acute fracture).,1
"At 2:20 p.m. on January 25, 2021, an employee of Legends Construction Company was moving some steel from a parking lot to a garage using a telehandler. The telehandler went off the road and tipped over, and the employee suffered broken ribs and lacerations.",1
An employee was setting up a CNC machine. The machine crushed the employee's right ring and middle fingers.,1
"An employee was trying to place a chute into a hopper under a conveyor through a side opening in the hopper. A rope, used to secure the chute in place under the upper conveyor, got caught in a conveyor drum at the bottom of the hopper. The employee was holding the rope in his hands at the time, and the conveyor pulled the rope and the employee's right hand down into the rotating drum. The hand was torn open and the top part of the index finger was medically amputated.",1
An employee was delivering packages when the truck door closed on their right middle finger. The employee sustained a fracture to the finger.,1
"An employee was cutting a board on a table saw. The saw kicked back and the blade amputated the employee's left index, middle, and ring fingers. The blade was unguarded at the time.",1
An employee was operating a utility loader and backed up into a horizontal beam. The employee sustained a broken rib.,1
"An employee was moving from one room to another when the automatic sliding door engaged, causing the amputation of the employee's left middle fingertip.",0
An employee was walking away from her car after parking it. She slipped on black ice and fell fracturing her left tibia.,1
"An employee was investigating an issue with one of the bag houses. While moving powder away from the flip flop valve (air lock), the air lock opened and the flip flop valve closed and amputated a fingertip.",0
An employee was operating a lashing machine when the bottom of her t-shirt was caught and pulled into the machine. The employee suffered a broken left arm.,1
An employee was running hot oil down tubing when his truck caught on fire. The employee sustained third degree burns to both hands.,1
"An employee tripped over a wooden pallet while delivering milk, falling and suffering a broken left wrist.",1
"An employee exited their work vehicle, slipped on the icy parking lot, and fell. The employee sustained two broken ribs and a collapsed lung.",1
An employee was welding a tube to a flange when a clamp device closed on her right thumb. The thumb tip was medically amputated above the first knuckle.,1
"An employee had been securing a load on a trailer with straps. The employee tried to step up onto palleted material when his left knee gave out, causing him to fall 4.5 feet to the pavement, resulting in injury to both knees.",1
"An employee was assisting with a rack repair in a warehouse. A weld broke on an upper crossbar, causing it to fall down and lacerate the employee's head and face.",1
"An employee arrived at work in the company parking lot and was getting out of her car. The employee slipped on ice in the parking lot and fell, resulting in a broken leg and hospitalization.",1
"An employee fell off a ladder while working on a garage door. The employee landed on the ground and suffered broken ribs, a pelvis injury, and a shoulder contusion.",1
An employee was installing the roof of a carport. The employee slipped on snow and fell off the roof to the ground 14 feet below. The employee broke several bones and was hospitalized.,1
"An employee was operating a restacker machine. The employee accessed the outfeed area, immediately to the right of the yellow guardrail, and the hoist came down hitting the employee and pinning him to the floor. The employee was found unconscious having suffered head and neck injuries.",1
"While descending an 8-foot ladder an employee slipped off of a rung and fell backward, hitting his head on a 4-foot metal safety pole during the fall. The employee sustained a head injury.",1
"An employee was performing maintenance on a motor line and fell through a hole, approximately 8 feet, to the surface below striking their head and losing consciousness. The employee suffered a contusion to the back of the head and was hospitalized.",1
"While conducting a field assignment, an employee was carrying equipment down a flight of stairs on his way to collect milk samples. The employee slipped and fell down the stairs striking the floor face first and sustained seven fractured facial bones and brain hemorrhaging.",1
An employee was working near a mini excavator and was struck by the excavator's bucket. The employee sustained a brain bleed.,1
An employee sustained a fingertip amputation when their finger was caught by the roller of a conveyor.,1
An employee was handling the winch cable on the back of a garbage truck. The end of the cable amputated his left ring finger.,0
"An employee was connecting two concrete traffic barriers. As he was placing the securing pin between the two barrier pieces, one barrier shifted, pinching his hand between the two barriers. The employee sustained an amputation to the left middle fingertip.",0
"An employee was walking to his car, slipped on snow and ice, and fell. The employee sustained a fractured left femur.",1
"An employee was cleaning a work truck. While he was clearing an obstruction in the salt hopper, his glove was caught and the auger partially amputated his hand.",0
"An employee had just finished unloading a trailer. The truck began to leave as the employee was removing the dock plate from the trailer. The employee fell between the trailer and the dock, suffering a leg injury.",1
An employee was operating a 30-ton press shear when a chip of metal struck the employee in the throat causing a puncture injury.,1
An employee was using a drill press and removing boards from the press when the drill bit caught his glove and pulled his finger into the bit. The employee's left ring finger was amputated.,1
An employee was walking along docks from the rear of the building toward the front. The employee was struck by a forklift traveling in reverse and sustained multiple lacerations and fractures to the lower left leg.,1
An employee was backing up an electric pallet jack to move out of the way of another associate. The employee's right foot was then caught between his pallet jack and a pallet that was on a stopped pallet jack in front of him. The employee sustained a crushing injury to the right lower leg.,1
An employee was walking down the stairs when he tripped and fell onto the floor sustaining a fractured knee.,1
An employee was part of a sanitation team and was cleaning the milk filler line when her wrist was pinned under a bottle cap turret. The employee's right wrist was fractured and crushed.,1
"An employee was driving an ATV on a gas well access road. As the employee drove down a hill, the ATV's rear end slipped on leaves. The ATV slid into a rut in the road and flipped over, throwing off the employee. The employee struck the ground and suffered a broken collarbone and three broken ribs.",1
"An employee was installing a new power line when a rotten telephone pole snapped, sending the power line onto the telecommunication line. The employee was struck by a live primary electrical line, resulting in electrical burns.",1
An employee was removing steel plates from a parts rack. The lower of two steel plates shifted as it was removed from the rack; the employee's right middle finger was caught in openings in the two plates and the fingertip was amputated.,0
"On January 26, 2021, an employee was climbing a ladder to access a roof. The ladder moved and the employee fell to the ground about 8 feet below. His left elbow, wrist, and leg were broken.",1
"An employee removed the protective covering of the elevator brake (brake cap). The brake coil sleeve got caught on the brake plunger and the employee lost his balance. The brake cap, which is a heavy piece of cast metal, fell onto the employee's right hand, breaking his thumb. The injury required hospitalization and surgery.",1
"At the end of her shift, an employee went to park and charge her forklift. She exited the forklift before it had completely stopped and the forklift pinned her leg against a concrete wall. She sustained broken bones in her foot and was hospitalized.",1
"An employee was operating a rubber blow machine. The employee was clearing excess rubber at the top of the machine when it started. Its hydraulic piston struck the employee's right hand, causing three fractures.",1
An employee slipped on ice in a parking lot. She fell and her head struck the ground.,1
"An employee entered a bus and tried to activate the service door lever, but fell down the three stairs inside the bus and onto the asphalt outside. The employee suffered a broken hip.",1
An employee was working as a packer on the thermal folding floor. A plastic blister fell down into a stacker. The employee went to get the fallen plastic blister when their left middle finger was pinched between two pieces of the stacker resulting in amputation of the fingertip to the nail.,0
"An employee was helping push a container in an aircraft. The employee's foot was caught under the wheel of the container, and the employee suffered a broken toe.",1
"An employee had been doing office work when the doorbell rang. The employee answered the door and an assailant gained entry, stole cash, and shot the employee in his right shoulder.",1
An employee slipped on ice and fell in the parking garage resulting in a broken leg.,1
"An employee was driving a concrete cart. As the cart turned from a street into a parking lot, it hit the concrete lip at the drive entrance. The handlebars jarred, hitting the employee in the side and causing him to fall off the cart. He landed on the concrete and suffered a broken left hip.",1
An employee's back went out while they were taking parts off a shelf that was 4 to 6 inches high.,1
An employee's tractor trailer was hit by another truck as it backed into a shipping/receiving area. The employee's head hit the driver's side window and was injured on the left side.,1
"On January 26, 2021, an employee was operating a bending machine to fabricate various sizes of metal hangers. The employee's left hand was caught in the rollers while running the flat stock through the machine and four fingers were crushed and fractured.",1
"An employee was walking when they were struck in the head with a magnetic door lock that had loosened, resulting in a head contusion.",1
"On January 26, 2021, two employees were trimming trees from an articulating boom lift, about 20 feet high. The lift drove over a septic hole, tilted, and fell; both employees jumped out. One of them suffered a broken right leg.",1
"On January 26, 2021, an employee was adjusting the bed height of a hydraulic press. The table/bed adjustment handle slipped and the table dropped on the employee's right hand. The employee's thumb was crushed between the bed and one of the pins the employee had been adjusting, and the thumb tip was amputated without bone loss.",0
"An employee was using a pressure washer to clean equipment. He slipped and the water stream lacerated his left hand. He was hospitalized, undergoing surgery to the hand.",1
An employee was unbinding cages from a live-haul trailer in preparation for unloading. The employee completed the trailer and proceeded to the other side of the loading area to start on the next trailer. The employee was struck by a reversing forklift and was hospitalized with a fractured right ankle.,1
"An employee was leaning over the side of a dumpster with his upper body inside the dumpster and his legs hanging outside. When he swung himself up from the position to his feet, he lost consciousness and fell to the ground, striking his head on the concrete. The employee suffered a subarachnoid hemorrhage.",1
"An employee was performing demolition activities in an area where a hole was cut in the concrete floor and a plywood cover was placed over the hole. The employee stepped on the cover and it shifted, causing the employee to fall to the floor below and resulting in a broken hip and arm.",1
A vehicle battery frame was being held by a scissor lift on one end while two other employees at the other end pushed the battery (weighing about 650 pounds) into position to be attached to the frame. One employee's left ring finger was caught and crushed between the frame and the battery. The employee's fingertip was amputated.,0
An employee was doing diagnostic work on a half-gallon juice filler. The machine's chain and sprocket caught the employee's right index finger and amputated the fingertip.,0
The employee was working from a scissor lift to fix an overhead garage door. A trailer backed into the scissor lift and knocked it over. The employee struck the concrete garage floor and suffered three or four fractured vertebrae.,1
"An employee slipped on ice and fell to the ground while getting out of a truck, resulting in a broken hip.",1
An employee was at a customer site delivering product. He was trying to lower his lift gate when the dock leveler was engaged. He fell between the dock and the lift gate and injured his legs.,1
An employee fell and struck his head on pavement after parking a vehicle in a yard. He lost consciousness.,1
An employee slipped on a walkway after leaving an office and suffered a broken leg. The employee was hospitalized.,1
An employee was refilling the hydraulic fluid for a bin dumper. The bin dumper activated and the employee was caught between the platform and the machine cradle. The employee suffered five broken ribs.,1
"An employee was using a manlift when the top pulley became detached from the anchor point in the manlift's head house and the employee fell within the manlift, resulting in two fractured arms and a fractured vertebra.",1
An employee was attempting to subdue a client when they fell to the floor and suffered a knee injury.,1
"At about 3:15 p.m. on January 27, 2021, an employee was standing on a ladder to stack mattresses. A mattress struck a support post when the employee pushed it toward the wall causing the employee to fall off the ladder to the floor. The employee suffered fractured ribs and vertebrae and a displaced disc. He was hospitalized.",1
An employee was moving material on a dolly. The dolly tipped over and the employee suffered a broken leg.,1
A belt and pulley caught an employee's glove and lacerated the employee's index finger above the knuckle. The top half of the finger was medically amputated.,0
"An employee was exiting a mailroom when she tripped over a rug in the hallway and fell to the floor, resulting in a fractured pelvis.",1
"An employee was removing lag bolts from a man cover, waiting for the slurry tank to drain. When all but two bolts were removed, the access door opened up spilling liquid lime onto the employee. The employee sustained burns to both feet.",1
"At about 6:00 a.m. on January 27, 2021, an employee was using a powered industrial truck (PIT) to load a trailer with product. The trailer pulled away causing the PIT and the employee to fall out of the trailer onto the tarmac. The employee suffered a lower back strain.",1
"An employee tripped over a unistrut and fell to the concrete floor, breaking her left elbow.",1
"An employee fell on ice in a parking lot, landing on the ground and suffering a broken hip.",1
"While an employee was adjusting the airline of a press, their foot slipped on a pedal and engaged the trimmer. The employee's right middle finger was amputated.",0
"An employee was operating a pallet jack inside of a trailer when his right foot became pinned between the jack and the trailer wall, resulting in a crush injury.",1
"An employee was operating a rubber mill when their right hand was caught between the roller of the mill and a piece of rubber. The employee's middle and ring fingers were degloved to the first knuckle. Later, the ring finger was medically amputated to the first knuckle.",0
"On January 27, 2021, a pipe fitter was changing out the transfer pump when he lost footing on the pump's foundation, slipped, and fell to the ground. The employee was hospitalized with a fractured left wrist.",1
An employee was rolling up cord reels. One of the reels got tangled and amputated the tip of the employee's left index finger.,0
"An employee was moving a group of metal bars. As he placed them on a table, they caught his fingers and amputated his left middle and ring fingertips.",0
"An employee was hauling a load of rock to a site. He got out of his truck, slipped on a patch of ice, and fell, resulting in a broken left hip.",1
"An employee fell while walking down a hallway, resulting in hospitalization for a knee fracture.",1
"An employee was driving a motorized pallet jack out of the freezer when he lost control. His right foot slipped, striking a pole and fracturing toes.",1
An employee had been climbing a utility pole to install a dolly on the pole and fell approximately 50 feet to the ground below. The employee was hospitalized with a lacerated spleen and internal bleeding.,1
An employee was working on a flare machine when a clamp closed on his little finger. He suffered an amputation to the finger.,0
"An employee was walking down a set of interior stairs. The employee slipped and fell a few steps from the bottom, suffering a broken hip.",1
"An employee was riding a tricycle when they stopped to let a pedestrian cross the aisleway, causing them to fall from the tricycle and resulting in a broken lower right leg.",1
An employee fell to the ground while helping another employee move stock/product. The injured employee sustained a broken hip.,1
"An employee was disconnecting the rigging from a rudder shaft that was secured on a flatbed trailer when he tripped on dunnage (wooden planks supporting the shaft), and fell on his hip on the flatbed trailer. The employee sustained a broken right femur.",1
"An employee fell from a tractor trailer while disconnecting the brake and electrical lines, resulting in hospitalization for a broken femur in their left leg.",1
An employee was conducting snow removal and injured a toe resulting in amputation.,1
"An employee was walking to their desk when they tripped over a box and fell to the ground, resulting in a broken humerus.",1
"An employee was hooking up a chain to move a mobile home to its next manufacturing station. The employee's right middle fingertip was crushed between two chains, causing an open laceration. He underwent surgery and the fingertip was medically amputated.",1
"An employee was loading a helicopter into a 40 ft. ocean shipping container. The employee kneeled on a razor blade lodged in a piece of foam, resulting in a laceration of the right knee.",1
"An employee was inspecting the upper level of a conveyor system. The upper section was not properly assembled and fell onto the employee from a 4-foot height, resulting in a fracture to their right ankle.",1
"An employee was stepping down from the last step of a 4-foot ladder when he fell to the concrete floor, suffering a dislocated hip.",1
"An employee stumbled while stepping down off a 4-foot ladder. He tripped and his head hit the wall; he then fell to the floor and lost consciousness, having suffered a concussion with brain bleeding. He was hospitalized.",1
"An employee was assisting a forklift operator with unloading 10-inch and 4-inch pipes when the employee's ring and middle fingers were caught underneath a 4-inch pipe, resulting in a partial amputation of the tips of their ring and middle fingers.",0
"An operator was putting product into a hopper. There were issues with processing the product through the grater/strainer. While the operator was pushing the product, a finger on their right hand contacted the auger resulting in partial amputation.",0
An employee fell to the concrete floor and suffered a broken left hip.,1
"An employee was spreading out a tarp on the roof of a residential structure when they fell from the edge of the roof approximately 8 feet, 11 inches to the ground below, resulting in a broken arm and wrists and a back injury.",1
"While walking between an operator station and the edge of a lathe in operation, an employee's shirt was caught by a 2-inch diameter piece of bar stock on the lathe. The employee fell to the ground and hit his head. He sustained a traumatic brain injury and an injury to the left arm.",1
An employee reset a breaker after a power outage. He was shocked by the breaker panel and knocked to the ground.,1
An employee was standing at the end of the trench box laying waterline when dirt engulfed the employee up to his hip. The employee was hospitalized with stomach pain.,1
"An employee had been climbing a fixed ladder while carrying a mop. The employee slid down the ladder and landed on the ground, sustaining bilateral foot fractures.",1
"After being loaded, a truck began to drive away from the loading area and ran over the driver of a second truck, who was waiting for their own truck to be loaded. The driver of the second truck suffered two broken legs.",1
"At 7:30 p.m. on January 28, 2021, an employee was sitting in his vehicle in a company parking lot when he was shot in the face with a shotgun through the driver's side window. He was hospitalized, undergoing surgery.",1
"An employee was operating a ring rolling machine when he noticed a cut off slug had fallen into the overlap press. He pressed the quit button on the controller to stop the machine. He then reached into the overlap press to clear the debris and the press crushed the two middle fingers on his right hand, resulting in a partial amputation of the two fingers just below the fingernail.",1
An employee was using a non-powered manual pallet jack to reposition a loaded pallet. The employee stepped back from the pallet and fell on the concrete floor. The employee was hospitalized with injuries to the right hip and leg.,1
"On January 28, 2021, a crane block and hook had been lowered to the ground for removal from the crane. As the crane load hook came in contact with the ground, an employee tried to rotate the load hook so the block/sheaves would come to rest in a vertical position on the ground. The hook became unstuck and his right foot was wedged between it and the load block. His little toe was broken.",1
"An equalizer bushing pusher activated and caught an employee's right hand, amputating the tip of the employee's right thumb.",0
"An employee was loading material into a line when they got caught in the machine, resulting in a partial amputation of the middle finger on their right hand.",1
"A forklift backed into an employee as she was walking on a pedestrian walkway in a dock area. She fell to the ground and one of the forklift's rear wheels ran over her left leg and foot. She suffered broken bones in the foot, big toe, and ankle.",1
"A mail carrier was walking to the next delivery when a dog came up from behind and jumped on him, knocking him to the ground. The employee suffered a broken right hip and broken left elbow.",1
"An employee was trying to remove a block of meat jammed in a grinder. Another block of meat came down and crushed his hand against the machine, breaking three bones. He was hospitalized and underwent surgery.",1
"An employee was driving a pallet jack backward to line up with a pallet when his left foot got caught between the pallet jack and a storage rack, resulting in injuries to his left ankle.",1
An employee was cutting a piece of metal with a saw. The saw amputated the tip of the employee's right thumb.,0
An employee had been cleaning a car and was found on the ground bleeding from a cut on the head. The employee was hospitalized.,1
An employee was cutting T-bone steaks with a bandsaw. The bandsaw amputated two fingers on the employee's left hand.,0
"The injured employee was assisting with mixing concrete by adding water to the mix while another employee was using a mixing drill. The injured employee's sweater got caught in the mixing drill chuck, resulting in a broken right arm.",1
An employee was cleaning a concrete form using a hand grinder with a wire wheel. His right thumb was caught in the tool's handle and lacerated.,1
"On January 29, 2021, a truck driver had finished unstrapping his load and was standing near his truck while the forklift operator was setting down cross-members. A cross-member rolled onto the employee's left leg, causing fractures to both the tibia and fibula. He was hospitalized.",1
"Employees were loading material that had been dismantled from a hoist onto a truck at the loading dock using a pallet jack. While the material was being transported by the pallet jack, the load shifted and one of the employee's left middle fingertip was caught between two hoist poles and amputated.",0
An employee was bent over looking at paperwork when the employee was struck from behind by a forklift. The employee was hospitalized with a fractured leg.,1
An employee was loading a pallet onto the trailer using a forklift when his left foot was pinned between the forklift and the pallet resulting in a broken foot.,1
"On January 29, 2021, at approximately 3:00 PM, an employee was spray painting a conduit pipe while on an A-frame ladder. He fell from the fifth rung of the ladder to the concrete floor and sustained a fractured right ankle.",1
"An employee was acting as a spotter for a forklift driver when the forklift backed over the employee's foot, resulting in a broken foot.",1
"An employee was moving a surgical equipment cart down the hall, tripped on the cart, and fell to the floor. The employee sustained a strained knee.",1
"An employee was transferring a 55-gallon drum to a secondary containment pallet. The employee slipped and fell, causing the drum to also fall. The drum fell on the employee's hand, resulting in the amputation of the right index fingertip and the right middle finger at the first knuckle.",0
"An employee was going to unload a tractor trailer at the loading dock. The employee straddled the trailer lip and the dock to release the door latch. The tractor trailer pulled away from the dock and the employee fell to the ground between the dock and the trailer. As the tractor trailer backed up to the dock again, the employee was pinned between the trailer and the dock.",1
An employee was signaling a tractor trailer as it was backing up. The employee was pinned between the trailer and the loading dock and sustained fractures to the ribs and pelvis.,1
"An employee was operating the press. The employee observed that there was no water on the water form roller tray. As the employee was checking the water supply, the employee's left index and middle fingers were caught and amputated by the water form roller.",0
An employee was operating a foamer when a faulty hose caused cleaning solution to be sprayed into the employee's eyes resulting in injury to his right eye. The employee was wearing goggles at the time.,1
An employee was intentionally struck by a car in the company's parking lot.,1
An employee was performing maintenance on a running truck engine belt and amputated their right pinky finger.,1
"An employee slipped and fell on ice while walking through the top level of a parking garage, resulting in a head injury and a laceration.",1
"An employee was moving plywood and fell to the floor, resulting in a hip injury.",1
"On January 29, 2021, two employees were sweeping shot off a 10,000-pound metal plate, which was moving on a conveyor. One employee's glove was caught in a moving roller, causing his hand to be pinched between the roller and bottom of the metal plate. He suffered two fingertip amputations and two crushed fingers.",0
"An employee was kneeling down, guiding a truck axle onto jack stands 12-14 inches off the ground while another employee operated a forklift to lift the axle. The axle rolled off the jack stands onto the employee, resulting in injuries to the lower back and rib.",1
"An employee was walking across the street/parking lot, slipped on ice and fell. The employee's head struck the pavement/curb. The employee was hospitalized with intracranial bleeding and a right wrist sprain. The employee was hospitalized.",1
"An employee was preparing to install the horizontal track for an overhead door inside a refrigerated truck while working from a 4-foot platform ladder. The safety screw that maintains the pre-spring-loaded overhead door in the down position had been removed and the door was ejected from the vertical door track. As the door moved upward, the employee's left index finger was caught between two panel sections resulting in the removed of skin from the fingertip.",1
An employee was clearing a jam at the jumbo printer slotter machine when their right index finger was caught by the kicker spring (metal bar) and the feed table resulting in a fingertip amputation.,0
"An employee slipped on ice and fell to the ground while walking through a parking lot, resulting in a fractured ankle.",1
"An employee was climbing a ladder while working at a customer's home. The ladder slipped and the employee fell approximately 20 feet to the ground, resulting in a thoracic fracture and chest contusion.",1
"An employee was using a table saw to rip a board. The board became jammed and while trying to unjam the board, the employee's right thumb made contacted the rotating blade, resulting in a deep laceration to the right thumb.",1
"A maintenance employee was working under a machine to diagnose why it was not working correctly when part of the machine lowered onto his head and neck, resulting in a cut to the head and neck.",1
"An employee was clearing a jam on the fresh processing line. After clearing the jam, the employee placed her right hand on the incoming PPI conveyor in order to stand up when her hand was caught by the rollers, resulting in a fingertip amputation of the right ring finger.",0
"Two employees were drilling holes using a hammer drill in order to install anchor bolts. One employee was operating the drill while the injured employee was standing next to the drill and guiding it. The injured employee's right glove got caught in the drill bit, twisting his hand and causing a partial amputation to the right thumb.",0
"An employee slipped and fell while walking, suffering a broken right ankle.",1
"On January 29, 2021, An employee was on the dump bed of a truck when she lost her footing and fell. She struck her back on the trailer hitch and was injured. She was hospitalized.",1
"An employee was unloading and putting away merchandise with a pallet jack. While moving pallets onto the pallet jack, the side of the jack hit his foot, resulting in a foot fracture.",1
"An employee leaned over in her chair to grab an item off of the floor when the chair tilted and fell, resulting in a hip injury.",1
"An employee was performing maintenance on a conveyor in the powder area when the adjacent palletizer actuated, pinning the employee between the conveyor and the palletizer. The employee sustained a fractured nose.",1
"An employee was using a bun hook to pull a cart of product from a tractor trailer. The bun hook slipped out from underneath the cart, causing the employee to fall backward over the lip of the lift gate to the ground.",1
"A crew placed a crate of windows on top of the roof of a building using a tower crane. After landing the crate and unstrapping it, a gust of wind blew the straps, causing the straps to reattach to the crate's corner and lift the crate. The crate struck the injured employee in the hip resulting in a broken pelvis.",1
"On 1/30/2021, at 6:00 AM, an employee was operating an overhead crane to move steel plate material in the horizontal position. The crane was equipped with lifting devices including a spreader bar, chains, and plate clamps. The rigging failed and the steel plate fell on the employee's right ankle resulting in lower leg fractures.",1
An employee was operating a chop saw and amputated a finger and injured two other fingers.,0
"While making a client's bed, an employee tripped over a bed sheet and fell. The employee was hospitalized with a broken hip.",1
An employee's left index fingertip was partially amputated while they were unjamming a can making machine. The machine was energized at the time.,0
An employee was on top of a low-profile trailer helping a customer load material. The employee fell off the trailer and sustained a broken right tibia.,1
An employee was feeding material into a digital printer when the material started to wrinkle. The employee was straightening the material when his right hand was crushed and lacerated between a roller and a belt. The employee sustained a broken bone in their pinky finger.,1
"An employee was deboning meat using a deboning knife when the knife slipped, causing a stab wound to the employee's right quad.",1
"An employee was pulling cartons from storage racks using a powered industrial truck (PIT) and fell 30 feet to the ground, sustaining a broken pelvis and a head laceration.",1
A parking garage employee had been working from a ladder and a roof to examine an outdoor light fixture. The employee fell off the edge of the roof approximately 11 feet and sustained a broken left femur.,1
"An employee was walking around a pallet to get a pallet jack when they tripped on a corner of the pallet and fell to the floor, resulting in four fractured ribs.",1
An employee climbed a mobile ladder stand on wheels in order to place a box on a shelf. The worker lost balance and fell 6.5 feet to the ground when the box hit a plastic pipe. The employee was hospitalized with a fractured pelvis.,1
An employee was retrieving an item from her personal vehicle at work when someone approached and shot her. The employee was hospitalized.,1
"An employee was mounting a scanner box on the stump when their right middle finger was pinched between the sling hook and the D-ring, resulting in a fingertip amputation with the loss of the distal phalangeal tuft.",0
An employee was standing in a freezer when a forklift ran over his left foot resulting in an injury that required surgery.,1
"An employee was walking through the parking lot to her car. The employee slipped on an ice patch and fell, resulting in a broken ankle.",1
"An employee drove up the hill in the back lot. When he got out of his truck, it rolled downhill and the driver's side door knocked the employee over.",1
"An employee was feeding a cube steak into the tenderizer on the beef line. The employee's right hand was caught in the tenderizer, resulting in the amputation of the middle finger.",0
"An employee was unloading the paint line. Metal panel 1 was on a cart. Metal panel 2 was being lowered to release the hooks between the panels. The hooks twisted, became locked, and did not release, pushing panel 2 up and off the paint line hook. Panel 2 fell approximately 5 inches, amputating the employee's right-hand pinky fingertip.",1
"On February 1, 2021, an employee was operating a roll form machine to make metal roofing panels. His left hand was on top of the panel when the roll form shear on the machine closed, resulting in amputation of his fingers and thumb.",1
An employee went out to the lobby and was assaulted by a family member. She sustained lacerations to the head and a skull fracture requiring hospitalization and surgery.,1
"While performing pump maintenance at a well, an employee dropped a fluid end side cap on his left hand resulting in a laceration and broken bones.",1
An employee was moving railroad cars with a bulldozer so the operator could finish loading them. The employee got off the bulldozer to adjust railcar couplers. One of the railcars moved and the employee was pinched between railcar couplers. The employee sustained a fracture to the left pelvic area and torn ligaments in the left leg and left hip.,1
"An employee was building frames and welding metal square tubing. The employee had just completed welding one side of a frame and turned to re-position to do the other side. He leaned onto the hot metal and the back of his jacket caught on fire. The employee was hospitalized with burns on his back, an arm, and the right side of his chest.",1
"On February 1, 2021, an employee was walking from the parking lot toward a building to start their work shift. The employee slipped and fell on ice in the parking lot. The employee sustained a fractured right hip requiring hospitalization.",1
An employee ascended an extension ladder to help guide a bundle of metal decking. The employee fell off the ladder about 9 feet to the next lower working surface and sustained a broken femur.,1
"The injured employee was manually moving a belt into position on a four belt gear pulley. The machine was locked out at the time. While walking belt #1 over onto the pulley where belt #2 had broken off, the injured employee had a co-worker manually rotate the shaft on the other side of the machine to help walk the belt into position. The injured employee was pulling up on the belt with his right hand and was using a screwdriver with his left hand to move the belt. The rotating shaft then reversed direction and the injured employee's right-hand fingers were caught between the belt and pulley resulting in a partial amputation to the middle fingertip and a fracture to the pinky finger.",1
An employee was walking to her car after finishing her shift when she slipped and fell on snow in the parking lot during blizzard conditions. She fell on her back and was later hospitalized for a concussion.,1
"An employee was walking to his vehicle during his lunch break when he slipped in the snow and fell to the ground, tearing a ligament in his left knee.",1
An employee was making his rounds and checking equipment when the wet ground underneath him gave way. He fell in a hole that was about 1.5 feet deep and contained hot water and steam condensate. The employee was hospitalized with burns to both lower legs and ankles.,1
"An employee was adjusting the banding and straps of a steel tubing and fabricator bundle weighing approximately 1,000 pounds that had been loaded onto a truck. The steel bundle fell off the truck and onto the employee, resulting in a broken right leg.",1
An employee was using a cutting torch to cut steel when the clothing on his leg caught fire. The employee was hospitalized with burns to his lower right leg.,1
"An employee drove onto campus and her vehicle was struck by a second vehicle. The driver of second vehicle exited his vehicle and shot the employee, resulting in hospitalization.",1
An employee was on a rider jack when their foot got caught between the rider jack and a gaylord container. The employee's foot was injured.,1
"An employee was performing a ski cut, an avalanche mitigation technique, when snow underneath his skis gave way causing him to fall head-first downhill. His hip struck a rock when he fell and he suffered a broken femur.",1
"An employee was assisting with assembling a trench box. A forklift was used to carry a 150-lb. steel spreader tube which was to be placed between the trench box sheets. The forklift tipped forward, causing the spreader tube to roll off the forks. The tube struck the ground and pivoted in a ""baseball bat swing"" movement, striking the employee on the left side of his torso below the armpit and also on the outside of his lower left leg. The employee sustained a broken rib, internal bleeding, bruising, and contusions.",1
"An employee was unloading freight when they tripped on a pallet and fell to the ground, resulting in a fractured right femur.",1
"An employee was carrying a shelf unit from the carpentry shop across the hall to the paint shop when he tripped on a painter's tripod and fell, resulting in a cracked pelvis on his left side.",1
An employee fell into a gap between a lift table and the floor which was around 2 feet deep. The employee sustained a dislocated shoulder.,1
"An employee was driving a backhoe to remove snow when the front loader arm got caught on an elevated sewer casting that was covered in snow, causing the backhoe to stop abruptly. The employee was propelled forward, impacting his chest on the steering wheel. The employee sustained a fractured sternum and a contusion to his chest.",1
An employee was going to hook up a choker to a crane in order to rig a part. The employee was working from an extension ladder when he lost balance and fell onto the concrete floor 9 feet below. He sustained a fractured right leg and was hospitalized.,1
An employee was using a circular saw to cut plywood when his glove was caught by the blade. His left hand was pulled into the blade resulting in amputation of the index finger and a laceration to the middle finger.,1
An employee was operating a stand-up pallet jack and crushed their ankle between the pallet jack and a steel racking vertical post. The employee was hospitalized for surgery.,1
"An employee was operating a flexible packaging machine that filled, sealed, cut, and discharged plastic bags filled with shredded cheese. As the filled bag of cheese was exiting the machine onto a metal load plate that agitated up and down for the purpose of settling the cheese in the bag, the employee's right pinky finger was caught between the agitating load plate and it's base platform beneath. The employee suffered a partial amputation of the finger.",0
An employee was drilling into a handhole when the drill caused an amputation to his thumb tip.,1
An employee was hospitalized due to carbon monoxide poisoning at or around the paint line oven.,1
"An employee fell when manually taking a door off a trailer and the door then fell on top of him, resulting in a broken hip that required surgery.",1
"An employee was using a hoist to lift a back flange from a rack for assembly. The employee was caught between the back flange and the rack, sustaining a fingertip amputation.",1
An employee who had been spreading salt had a heart attack and was hospitalized.,1
"An employee was cutting wood molding on an industrial chop saw. He was using a piece of wood to push out another piece of wood when he felt dizzy and lost balance. He moved forward, pushing the foot pedal down, and the saw blade lacerated his left hand.",1
"An employee was walking down the hallway to prepare medication when she slipped and fell on the floor, resulting in a twisted ankle.",1
"An employee was taking a dog to the play area. The dog attacked the employee, biting and holding onto his arm. The employee was hospitalized with an open wound and fracture to the right arm.",1
"An employee was unloading a trailer with cardboard pallets when the pallets fell on top of him, resulting in shoulder and neck injuries.",1
An employee sustained left hand finger amputations when their hand was caught in a flaker roll machine.,1
"An employee was walking into work from the outside when they slipped and fell on the wet floor, resulting in a broken humerus.",1
"An employee was removing snow at a property. He was using the company plow truck, shovels, and a snow blower. The employee experienced shortness of breath, chest pain, and fatigue. He was later hospitalized for a heart attack.",1
"An employee was walking when they tripped over a pallet, resulting in two broken bones in their left foot.",1
"An employee was walking to their car when they slipped and fell on black ice, resulting in a broken right elbow and wrist that required hospitalization.",1
"An employee was banding wood products together. As he walked around to the other side of a bundle, he tripped and fell to the floor, breaking his hip.",1
A construction crew was setting up for a scene in a movie. The wind lifted the last two prefabricated walls that were to be installed on the set and they landed on two employees causing fractures and bruises. The walls were approximately fourteen feet long and ten feet tall. One employee was hospitalized.,1
"An employee slipped on ice in a parking lot and fell, striking his head on the pavement. He suffered a spinal fracture.",1
An employee was beginning to move a table when its marble tabletop fell off onto her right foot. She suffered fractures to the second and third toes and an open wound on the third toe.,1
An employee was struck by a motor vehicle at a construction site. The employee was hospitalized with a broken femur.,1
An employee was working to unjam the cable of a plumbing machine when his rubber glove got caught on the cable and caused an amputation to his right middle finger.,1
"An employee was clearing snow using a skid loader. The loader's bucket hit something solid, causing the skid loader to stop abruptly. The employee's chest collided with the safety bar inside the loader, causing the employee to lose consciousness. He was hospitalized.",1
An employee was driving a standing forklift to haul material when the employee fell off and broke their right hip.,1
Employees were grounding a 115KV line. An employee was in a bucket truck when the truck's upper boom contacted an ungrounded phase which energized the bucket. The employee was shocked and lost consciousness for approximately 30 seconds. The employee also suffered burns to his left hand that required hospitalization.,1
"An employee was replacing a hand basket near a row of carts when they tripped over a cart wheel and fell to the floor, resulting in a broken femur.",1
An employee was cutting plywood with a circular saw when the blade bound up and the saw jumped forward. The employee's left ring finger was amputated.,0
"An employee was manually rotating a 4-foot-wide grater drum (without its drive chain and motor attached) to do maintenance.  The employee's right little finger was pinched between the bar and another part, causing an amputation to the finger.",0
An employee was using a circular saw to cut a wood board. The saw partially amputated the employee's left ring finger.,0
"An employee was assisting other drivers place trailer jacks under trailers. While pushing a jack stand under the nose of a trailer, the employee slipped on snow and ice on the ground and fell. The jack stand then tipped over, landing on the employee's left hand and fracturing the middle and index fingers.",1
An employee fell on ice while delivering mail. The employee was hospitalized with a fractured left tibia.,1
"An employee was working on the ground approximately 15 feet from a transmission structure when a knee joint fell from the transmission structure, hit an adjacent apartment building, and bounced onto the employee, striking him in the hard-hat. The employee was knocked to the ground, striking his face and resulting in an eye socket fracture.",1
"An employee was standing on the ground reaching over the rear passenger side wheel well directly adjacent to an affixed catwalk on the rear of a water supply truck. While the employee was operating a drain valve located on the rear of the tank, the employee slipped on snow and ice building up on the street surface. As the employee slipped and fell, they grabbed the catwalk guard railing and their left ring finger caught on the railing corner gusset support, resulting in a partial amputation down to the first knuckle.",0
"An employee was trying to open valves on the back of a gang saw so that the blade guides could be moved. The saw moved, crushing the employee against the chains. The employee suffered broken ribs.",1
"An employee was examining a conduit pipe in a 4-foot trench when he lost his balance and fell into the trench. The employee was then struck by soil when the wall of the trench collapsed, resulting in an injured spleen.",1
An employee was inspecting a pump jack on top of an aerial lift. The jack unit activated and pinned the employee between a crank arm and a pitman arm. The employee suffered a broken hip and a broken rib.,1
An employee fell from a ladder.,1
An employee was manning the hose on a pump truck. The employee's right leg and shoulder were fractured when the ridge of the pump truck tipped over onto the employee.,1
"An employee was cleaning a spray paint gun when he received a laceration to his finger, requiring hospitalization.",1
"An employee was using a crosscut saw to score the bottom of a 4'x8' sheet of plywood when the sheet kicked back and struck the employee in the abdomen, lacerating their abdomen and embedding a portion of the wood in their body.",1
"An employee was pushing and scraping meat inside the hopper of a meat extruder when their right-hand middle finger became caught in the meat extruder, resulting in a partial amputation.",0
An employee was lifting a vehicle side glass support when he sustained a fractured right humerus.,1
"On 2/3/21 at 2:21 p.m., an employee was setting the rolls in a pellet mill using wrenches and an air blower to blow off the dust that accumulates. The employee's glove became caught in the roll, pulling his left hand in and amputating his ring and middle fingers. The nail and skin was removed from his index finger.",0
An employee slipped on snow and fell while delivering propane to a customer's residence. The employee sustained an injury to the knee requiring surgery.,1
"An employee was picking products when she tripped and fell, resulting in a fractured left femur that required hospitalization.",1
"An employee was at a sow farm conducting feeding operations. The employee was cleaning the feed-in feeder when his hand startled a sow. The sow thrust her head upwards, catching the employee's left ring finger between the sow's head and the top support bar of the feeder. The fingertip was amputated.",0
"An employee was moving an aerial lift while inside the aerial lift when the lift hit a pothole. The basket bounced, causing the employee the hit the basket and fracture his right leg.",1
An employee was moving skids using a pallet jack. The employee tripped over the pallet jack and fell to the floor. The employee sustained fractures to his left leg.,1
"An employee was skiing down the mountain at the end of their work shift when the employee fell, resulting in a fractured lower right leg.",1
An employee was waiting outside for their ride when the employee fell on ice. The employee sustained a broken right ankle.,1
"An employee slipped on ice in a parking lot and fell to the ground, suffering a broken hip.",1
An employee was walking from her car to the facility when she tripped on the concrete sidewalk curb in the parking lot and fell. The employee sustained injuries to the right knee.,1
An employee was moving a newly constructed jig horizontally across the floor. The jig broke apart and the employee fell to the concrete floor. The employee sustained a broken right femur.,1
"An employee was walking up the stairs when they turned to go back down and fell down two or three steps to the floor, resulting in a fractured left ankle.",1
"An employee was walking in a parking lot when they slipped on ice and fell, resulting in a broken lower right leg and twisted ankle.",1
"An employee was transporting a circular cutting blade on a carriage. The employee tried to prevent the blade from rolling off of the carriage, resulting in amputation of the nail bed on the right ring finger.",1
An employee was walking in a parking lot to get from one building to another when they fell and broke their left wrist. The fracture required surgery.,1
An employee was operating a pallet jack when their right leg was pinned between the jack and a safety bollard. The employee sustained a compound fracture of the tibia and fibula.,1
"An employee was assisting a plating operator with moving a 5/8"" X 60"" X 125"" steel plate weighing 1,200 pounds to a 4"" X 4"" piece of dunnage. During the transfer, the employee placed his hand on the dunnage as the operator was using a pry bar to move the plate to a table. The plate caught the employee's ring finger and crushed it, resulting in a laceration that became an amputation.",0
"An employee was setting up to install cable wire when the employee came in contact with a primary 14,000-volt electrical line. The employee sustained an electric shock.",1
An employee was butchering meat with a knife when the knife punctured his right leg. The employee was hospitalized for surgery.,1
"An employee was using a battery powered drill to ream out a hole on a trailer. As he removed the drill, his glove got caught on the drill bit. The employee's pinky fingertip was surgically amputated.",1
An employee was moving boxes when their foot was stuck in-between a pallet. The employee fell and sustained a fractured ankle.,1
"An employee was operating a press to manufacture parts. The employee activated the press with a two-hand control and then reached into the area where the part was located before the ram returned to the top. The employee's left ring finger was caught between the guard and the plate, resulting in a fingertip amputation without bone loss.",0
"On February 3, 2021, an employee was operating a panel saw and suffered an amputation injury to a finger.",0
An employee was driving a scissor lift through a door and severed his left ear.,1
"A technician was exiting a customer's premises after knocking on the door when he slipped on ice and fell, striking the back of his head on the granite steps. The employee suffered a fractured skull and concussion, including internal bleeding.",1
An employee fell from a ladder and suffered injuries requiring hospitalization.,1
An employee was helping another employee work on the back of a feed mixer to replace a stub shaft and bearing. The new stub shaft was on the ground and the employee tripped over it and fell. The employee sustained a dislocated and broken left ankle.,1
"An employee was operating a smelter when a co-worker pulled the cover from the pit that is partially filled with hot water (180 degrees). The employee went to start the smelter, stepped into the pit, and suffered first and second degree burns to his left leg from his foot to eight inches above his knee.",1
"On February 4, 2021, an employee was documenting a loose drive chain within a machine and used their finger to lift the chain to take a picture of it. The employee's fingertip became caught in the sprocket, resulting in a fingertip amputation. The machine was in operation at the time.",0
"On February 3, 2021, an employee was walking on the deck of a flatbed trailer to put straps on steel tubing. He tripped over a fixed piece of the trailer and fell off to the driveway below, breaking his left ankle. He was hospitalized.",1
An employee was setting up a crimper machine when he sustained the amputation of two fingers.,0
An employee was feeding tree trimmings into the chipper when a 3/8 inch metal wire hidden in the trimmings got pulled into the drum of the chipper. The wire swung with a force that amputated the employee's leg.,1
"An employee was operating a core machine when he engaged a plate within the machine that came into contact with his right index finger, resulting in a fingertip amputation that required surgery to be re-attached.",1
"An employee was climbing a closed A-frame ladder that was leaning against a truck when they fell about 6 feet from the ladder to the ground, resulting in a possible tailbone fracture.",1
"An employee was loading bundles of steel tubing onto a truck trailer when his right middle finger was caught between the two bundles, resulting in amputation.",1
An employee was skiing when they fell and fractured their right tibia.,1
An employee was attempting to winch a stuck excavator when he was struck by flying debris. The employee sustained a broken arm and an injured torso.,1
An employee was on top of a meat stuffer pushing ground meat through the funnel into plastic tubing when the machine was turned on causing the plastic turbine to contact the employee's right hand and amputated two fingertips.,0
An employee was trimming a piece of metal with a bandsaw when the bandsaw partially amputated his right index finger.,1
"An employee slipped on ice in the parking lot and fell, resulting in a broken ankle that required hospitalization and surgery.",1
An employee was removing a rubber mold with his hands when the mold closed onto his pinky finger. A portion of the employee's pinky finger was medically amputated.,0
An employee slipped on ice and fell in the parking lot while reporting to work. The employee was hospitalized with a broken right leg/ankle that required surgery.,1
"An employee was testing a signal at the cross box, approximately 20-30 feet from the highway when a tire came off of a vehicle that was traveling on the highway and struck the employee. The employee sustained a broken leg.",1
"An employee was manually rolling a metal barrel when his right hand was pinched between the barrel and the rolling pin, resulting in broken bones.",1
"An employee was repositioning a coupler front wall assembly weighing approximately 250 pounds when their left index finger became caught between the part and a roller table, resulting in a partial fingertip amputation.",0
"An employee was handling steel members when the steel member rolled over onto the employee's hand. The employee's right ring finger was crushed, resulting in amputation.",0
"An employee was setting up his truck on asphalt hard top with a gravel shoulder at approximately a 10 percent grade and with approximately a 1-inch lip. The employee was walking on the gravel shoulder and transitioning to the asphalt surface when he tripped on the lip and fell, landing on his right hip and resulting in a fracture of the right femur.",1
"A law enforcement officer was serving an arrest warrant when his team was fired upon, resulting in gunshot wounds to the left arm and chest that required hospitalization.",1
An employee was ascending a ladder to a residential roof when the employee fell to the ground. The employee sustained injuries to both legs.,1
"An employee attempted to make a U-turn while driving a yard horse when a reach stacker machine impacted the yard horse, resulting in an injury to the employee's right leg that required hospitalization.",1
"An employee was operating a clipping machine when their left hand contacted the die of the machine, resulting in fractures to their thumb and middle finger and an index fingertip amputation.",0
"An employee was unloading a shipping container. A metal skid fell on his legs, resulting in a broken knee.",1
"An employee tripped on a pressure hose while walking through the entrance to a service bay door, resulting in a broken knee and leg, and cuts to their face and head.",1
"On 2/04/2021, at approximately 8:45 AM, an employee was unloading roof tiles from the conveyor belt boom on top of a roof when he fell off the roof and landed on the ground 25 to 30 feet below. The employee sustained multiple fractures including his face, left arm, and legs. The employee's injuries required multiple surgeries.",1
"An employee was walking down a hallway inside of the facility. The employee tripped and fell to the floor, resulting in a broken left hip.",1
"An employee was scrapping ice and snow off a deck when they fell through a hole in the deck, resulting in a leg injury that required hospitalization.",1
A team of three employees were working to pull a sump pump. An employee sustained an amputation of 4-5 cm. of his finger when his finger was caught between the pump and the deck floor.,0
"An employee was standing with his back to a skylight when he stepped backward and fell through the skylight, sustaining a leg injury.",1
"An employee was disassembling a gearless machine when their left ring finger was pinched by the machine block, resulting in a fingertip amputation.",1
An employee was working on a production line that makes puppy pads and was adjusting a belt when he lost his balance and his hand was pulled into the roller. The employee sustained two broken fingers on his right hand.,1
"An employee was walking on a platform. The platform broke, causing the employee to fall and sustain a fractured right hip.",1
An employee was walking into the building from his work truck when the employee slipped on ice in the company parking lot and fell. The employee sustained spiral fractures to the tibia and fibula.,1
An employee was putting in pipes to install the supports for the concrete base. The employee ascended the rebar column approximately 18 feet above the concrete base. The employee was standing on a 2x4 piece of lumber that was inserted into the rebar when the lumber split and the employee fell approximately 18 feet. The employee landed on his feet on a 15x15 concrete footer and was hospitalized for fractures to both ankles.,1
"An employee was stepping down from a mail vehicle when they slipped and fell to the ground, resulting in a twisted ankle that required hospitalization and surgery.",1
"An employee was manually repositioning a metal cabinet in a wooden shipping crate when their left pinky finger was caught between the wooden crate and the cabinet, resulting in an amputation between the nail bed and knuckle.",0
"An employee slipped on ice in the parking lot and fell, resulting in an injured left ankle.",1
"An employee walked around the counter to exit and tripped over two small lawnmower tires, falling to the floor. The employee sustained a fractured right hip.",1
"An employee was unloading a trailer of tires. The employee climbed on the stack of tires to remove the top tire. The employee lost his balance and fell to the floor, breaking his arm in three places. The empoyee was hospitalized for surgery.",1
An employee was working on a door hinge machine when they suffered a left index finger amputation past the first knuckle.,0
An employee was in the rear of the property looking for an electric service handhole. The employee stepped onto a plastic stool bench in order to see over the fence. The employee lost his balance and suffered a puncture injury underneath the armpit from climbing spikes protruding from a  communications pole.,1
"On February 4, 2021, an employee was exiting a backhoe when they slipped on a step and fell to the ground, resulting in hospitalization due to a fractured hip.",1
"An employee was taking the trash out when they slipped and fell on ice, resulting in a right ankle fracture.",1
"The employee was on break in the hallway and engaged in horseplay with another employee. As the employee turned to run, he lost his footing and fell to the floor. The employee was hospitalized for a back injury requiring surgery.",1
An employee was taking out of the trash at 11:30 p.m. when they slipped on ice on a sidewalk and fell to the ground. The employee suffered a neck injury that required hospitalization and surgery.,1
"An employee was walking down the stairs on the roof and slipped on ice, resulting in a torn tendon.",1
"An employee was working from the back of a garbage truck when his hand slipped, becoming pinned by the handle of the hopper. The employee sustained a fracture to the left forearm.",1
"An employee was walking from his work station when he tripped over a stepstool and fell to the floor, resulting in a fractured right tibia.",1
"An employee was climbing a fixed ladder in a cooler and fell approximately 15' to the floor, sustaining fractures to the left arm and left hip.",1
Four employees were attempting to modify an approximately 10 ft. high by 10 ft. long non-assembly single piece metal scaffold system on wheels and lay it on its side in order to replace 2 x 8 wooden platforms. The scaffold kicked out while the employees were tipping it over and the scaffold fell  onto an employee's left leg resulting in a compound fracture.,1
An employee was installing pillars while on a ladder when they fell into a cofferdam below and had to swim to a ladder to exit the dam. The employee suffered a fractured leg.,1
An employee was walking through a horse pasture after completing chores when a horse kicked the employee in the back. The employee sustained broken ribs.,1
An employee was cutting fruit at a fruit station and had difficulty breathing. The employee lost consciousness after being exposed to sodium hydroxide that was used to clean the hood and was hospitalized.,1
"An employee was walking into a building after retrieving a small bank deposit bag from the service vehicle when they slipped and fell on the floor at the entryway to the building, resulting in a fractured left humerus.",1
An employee was stenciling the side of pallets. His thumb was caught between a pallet and a bar as a pallet was being lowered by the automated stacking machine. The employee sustained an amputation to the right thumb above the knuckle.,0
"Two employees were hanging a mold in a machine. The injured employee was on the back side of the machine, holding a mold in the center location, while the other employee was adjusting the die heights in order to hold the mold in position. The mold moved and pinched the injured employee's pinky finger between the platen of the machine and the mold, resulting in amputation.",0
An employee was clearing a jam off a conveyor when the employee sustained a partial amputation of their right index finger.,1
An employee was trying to straighten the synthetic turf when the turf cutting knife engaged and amputated their right ring and pinky fingers.,1
"An employee was on a roof accessing a component of an HVAC system when they fell off the roof approximately 10 feet onto a brick walkway, resulting in a fractured pelvis.",1
"An employee was using a handheld grinder to grind down welds on a trailer. The employee's two middle fingers contacted the grinding disk, resulting in an amputation to the fingers.",0
"An employee was underneath a vehicle unscrewing the drain plug when oil sprayed out at high velocity and caught fire, resulting in second and third degree burns to the employee's back.",1
"An employee was repairing a machine while on an extension ladder and using an airline. The line became tangled around his feet and caused the ladder to shift. The employee lost his balance and fell to the ground below, resulting in fractures to both ankles.",1
"An employee was entering a storage closet to get cleaning supplies when his hand became pinched in the closing closet door, resulting in a partial amputation of the right ring finger.",0
"An employee was opening a liftgate by pushing a slider from the side. The employee's right index finger was pinched by the slider, resulting in an amputation to the finger just below the nail bed.",0
"On 2/5/2021, at 10:20 AM, an employee was making a delivery when he slipped on ice in front of a customer's home and fell to the concrete ground, resulting in hospitalization due to a broken hip.",1
An employee was operating a pallet jack in order to lift an electrical panel assembly onto a cart. The load tipped over onto the employee. The employee was hospitalized with left leg and hip injuries.,1
An employee was about to begin repairs to the belt and pulley system of a table saw motor when the machine started and amputated two fingers on their right hand.,0
"An employee was working on a rooftop heater when the v-belt pulley pulled the employee's glove inward, resulting in the amputation of his thumb.",0
"An employee was assisting in the loading of a 20' flatrack onto a vessel. The employee installed a lifting cable into position and applied tension to the cable using his right hand. As the cable pressed against the flatrack, the tip of the employee's right index finger was pinched off.",1
"An employee was walking a crawl space, looking for signs of pests. The employee fell through the ceiling to the ground 12 feet below, suffering a lower back injury.",1
"An employee exited their vehicle to deliver mail, slipped on black ice, and fell resulting in a broken left knee cap.",1
"An employee was removing a jam in machinery when the machine's shuttle moved and crushed the employee's finger between the shuttle and rail, resulting in a fingertip amputation.",0
An employee was cutting material at the chop saw and sustained amputation of his right hand.,1
An employee was cutting beams with a circular hand saw and lacerated their right index finger.,1
An employee was waiting for a boat to arrive and fell off the dock onto a wood float below the pier. The employee sustained fractures to a rib and leg.,1
"An employee was walking on the platform when he lost his footing and fell 29 inches off of the platform to the surface below, resulting in a fractured rib.",1
"An employee opened up an internal trailer valve to apply pressure and connected the hose to the trailer to offload product. While putting the hose in place to connect it, the external valve switch was hit and sulfuric acid came pouring out of the trailer, resulting in chemical exposure to sulfuric acid on the left and right wrists, left foot, left side of face, and middle of chest.",1
"An employee was helping to move a steel beam with a hoist. The employee's left ring and middle fingers were pinched when a hook on the hoist slipped, resulting in an amputation.",1
An employee was driving down the main aisle towards the bulk heavy area. The employee's lower left leg was caught between the lift and the pallet stop at the end of an aisle.,1
"An employee was loading a van when racking tipped over onto the employee, resulting in a head injury/concussion.",1
"An employee was descending a platform ladder after setting up an oil rig platform when a crane hook caught the ladder and pulled it off the platform, knocking the employee to the ground and resulting in broken bones.",1
"On February 6, 2021, an employee was performing switchgear preventive maintenance and removing a panel when a live electrical component came into contact with their skin, creating an arc flash that resulted in second degree burns to their right hand and forearm.",1
"An employee was assisting a client at the client's home. The client became upset and pushed the employee out of a chair, resulting in a broken ankle.",1
A nurse was struck in the head by a patient and fell to the floor. The employee sustained a skull fracture and a broken leg.,1
"An employee was delivering a parcel when they slipped on black ice on a driveway and fell, resulting in a fractured right fibula.",1
An employee was operating a tire removal/installation machine. The employee's fingertip was caught and pinched between two metal parts of the machine. The fingertip was medically amputated.,1
"An employee was bucking a tree on the ground. The previously cut section moved unexpectedly and the employee's leg was caught between the previous section and the remainder of the tree, resulting in a broken lower leg.",1
"An employee was installing round duct in a clean room ceiling. When he placed his knees on an access hatch door, the latches gave way and the employee fell approximately 10 feet through the opening to the metal floor below. The employee sustained fractured legs and a fractured left shoulder and was hospitalized.",1
"An employee was making a turn while driving a dock truck when it collided with the fork of a parked dock truck, resulting in a broken left ankle.",1
"An employee was using a pallet jack to select groceries. The employee's left leg was pinned between the pallet jack and a rack, resulting in a torn left ankle tendon.",1
"An employee was moving a phone booth with a pallet jack. The phone booth tipped over and fell on the employee, resulting in a broken leg.",1
"The injured employee and a coworker removed a valve body to unclog pods in an auger. After they unclogged the pods and reloaded them, they proceeded to reinstall the valve body. As they were picking up the valve body, the coworker slipped and the valve fell onto the injured employee's left pinky finger, resulting in a fingertip amputation.",0
"An employee was loading bags of salt into the bed of the pickup truck. The employee closed the tailgate, catching their finger between the tailgate and the job box and resulting in a partial amputation of the left ring finger.",0
An employee was walking to his car through the parking lot when he slipped and fell on ice. The employee sustained a fractured left ankle.,1
An employee was freeing mule tape from a light pole foundation while securing the wiring when his right hand was caught between the light pole and foundation. The employee sustained a right hand laceration that required surgery.,1
"On February 8, 2021, an employee was operating a shear and amputated a fingertip.",0
"An employee was walking back to his truck after delivering mail when he slipped and fell on snow and ice in a driveway, resulting in torn quadriceps in the upper left leg that required hospitalization and surgery.",1
An employee was training for her pallet jack certification when she fell off the lift. The employee suffered a laceration to her left leg.,1
"An employee was operating an all-terrain forklift when they made a turn while backing up and the forklift rolled over, resulting in a laceration on their head that required stitches.",1
"On October 8, 2021, an employee was walking to a furnace when he tripped over a spud bar approximately 18 inches off the ground and fell into a batch charger, resulting in head wounds on their forehead and scalp that required staples and stitches.",1
An employee turned quickly when a patient called out. The employee fell to the floor and sustained a fractured left humerus.,1
An employee was welding cross-members under the truck body when it flipped over and pinned him on his sliding cart. The employee fractured his pelvis and sustained third-degree burns to his right calf.,1
"An employee was walking into the facility when they slipped on any icy/wet floor and fell, resulting in a fractured right ankle.",1
Cases of ice tea were knocked over and struck an employee on the back.,1
"On February 8, 2021, an employee was adjusting the glass of a glass crate weighing 1,900 pounds when the glass fell out. The employee was pushed by the falling glass into the closed crate behind him, trapping him between the falling glass and the completed crate. The glass and the employee then slid to the floor. The employee sustained swelling and bruising to the abdomen, left leg, left knee, and left hand, with a possible meniscus tear in the left knee. The employee was hospitalized.",1
An employee was placing a cash drawer in a safe when the tip of their right thumb was caught in a pinch point and amputated.,0
An employee was mounting a forklift when they slipped off the forklift resulting in strained muscles in the abdominal area. The employee had ice on their shoe at the time.,1
"An employee was conducting pest control services at a private residence. The employee slipped and fell, hitting his head and sustaining a brain bleed and blood clot.",1
An employee was moving a sled in order to begin the adjustment of a roller. The employee sustained a fractured left hand when their hand was caught between a conveyor roller and the sled.,1
"An employee fell from the back of a pickup truck while working on a salt spreader, resulting in a bruise to their temple.",1
"An employee was smoothing out the surface of an anchor bolster with a grinder. The employee stopped using the grinder to reposition it and it actuated, lacerating the employee's left knee.",1
An employee was clearing a jammed label on the cocoa line and broke his hand.,1
"An employee was moving a four-wheel rolling chute across the floor when the equipment rolled into an opening, toppled over, and fell on his lower left leg and fractured it.",1
An employee was unloading drywall from a trash box. The box flipped and the employee fell approximately four stories and sustained a broken right leg and pelvis bone.,1
"An employee was making a cut on the metal of a rail car using an air arcing cutting torch. The employee's clothing was ignited, resulting in second-degree burns with a small patch of third-degree burns to the right side of his back and neck.",1
"An employee was moving material from inside of a bus to the outside when they slipped and fell to the pavement, resulting in a fractured hip.",1
"On February 8, 2021, a security captain attempted to restrain a combative patient when he fell to the ground, resulting in a fractured right ankle.",1
"A flight attendant was completing her final compliance check when the aircraft experienced a sudden drop, causing the flight attendant to fall and another flight attendant to fall on top of her, resulting in a fractured ankle.",1
An employee was using a pallet-dismantling saw when he sustained the amputation of his left pinky finger and a laceration to the left ring finger.,0
An employee was attempting to clear a jammed film pouch from a food packaging machine when the machine amputated the tip of his right middle finger.,0
"On February 8, 2021, an employee was using a bandsaw when the saw amputated their right index finger to the second knuckle.",0
"An employee was closing a manhole cover in the floor of a mud pit when a disconnected 6-inch discharge line lying next to the cover shifted, pinching the end of the employee's finger between the floor grating and the discharge line. The employee suffered an amputation of the tip of his left middle finger.",0
"An employee was connecting a new water line when the end cap blew off the existing water line and struck the employee in the calf, resulting in a broken leg below the knee.",1
"An employee was fixing a jam in a conveyor when the motor was started and the employee's fingers were caught in the motor chain, resulting in amputation of two fingers and hospitalization. The motor guard was removed at the time of the incident.",1
"An employee was closing a gate when they turned back and tripped over a wheel on the gate, falling to the ground and fracturing a hip.",1
"An employee was inspecting HVAC equipment in an attic when he slipped off an attic access ladder and fell 8 feet to the ground, resulting in a broken left leg that required hospitalization.",1
"An employee was feeding a new roll of film into a packing machine when the air-actuated jaw closed and reopened on the tip of his right index finger, resulting in an amputation.",1
An employee was placing meat on a wing saw when the saw lacerated his middle finger and partially amputated his right index finger.,0
"On February 9, 2021, at 1:45 pm, an employee was standing near a squirt boom utility truck putting away rigging equipment used during boring activities. A bucket truck was backing up and struck the employee, pinning them between the two trucks and resulting in fractures to their left ulna and radius about the wrist.",1
"An employee opened the back door of a trailer and a boxed hot water heater fell from the top of a double stacked row and struck him on the shoulder, knocking him to the ground and resulting in a right hip fracture.",1
"An employee was trimming wood molding with a 10-inch saw. When they used a stone to sharpen the saw, the saw amputated their left middle fingertip.",1
"An employee was using a utility knife to open a shower head in plastic packaging when the knife struck his right torso, resulting in a laceration to his liver.",1
An employee was removing trash from a room when he sustained a lower back injury that required hospitalization.,1
An employee jumped out of the bed of a work truck that was stuck in the mud and suffered a broken leg.,1
An employee was cutting pipes when his finger got caught between a pipe and the guard hold-down. The employee's fingertip was amputated.,1
An employee was cutting product on a shear machine when the machine amputated his right thumb.,0
"An employee was using a ladder in order to access the top of a walk-in cooler. The walk-in cooler was outdoors and the conditions were below freezing and icy. The employee slipped and fell approximately 5 feet to the ground, resulting in two fractured bones in the lower half of the right leg.",1
"An employee was adjusting the limit switch on an air-operated valve when the valve actuated, catching his left index finger between the position indicator and the limit switch and resulting in a fingertip amputation.",0
"An employee was unpacking a glass door from a wooden crate when the crate fell over and struck the employee in the lower leg, resulting in fractures to the tibia and fibula.",1
"An employee opened an access door to adjust the tension on a belt for a bag sealer machine. During that task, the access door strut failed and he attempted to tighten the door strut bolt with a wrench. The employee's hand slipped from the wrench and the tip of his right ring finger came into contact with the belt gears located just below the door strut, resulting in an open fracture and amputation.",1
"An employee was walking to a back door when they slipped and fell on ice, resulting in a fractured ankle that required hospitalization.",1
"An employee was leaving work when she tripped and fell to the ground, resulting in a fractured right hip.",1
"On February 9, 2021, at approximately 5:30 p.m., the injured employee was adjusting the hydraulic cylinder of the hold down roll. The arm of the hold down was resting on the coil mandrel. As the employee removed the pin of the hydraulic cylinder the arm rolled from the mandrel pinning him between the arm and the column. The employee sustained two fractured ribs and was hospitalized.",1
"An employee was making a residential delivery when he slipped and fell on a driveway covered in partial ice and snow, hitting his head and resulting in a laceration that required two staples to close. The employee was hospitalized.",1
"On February 9, 2021, a temporary employee struck an R.R. Donnelley employee with his fist causing him to fall and hit his head on a metal cabinet. The employee was hospitalized for a concussion.",1
"On February 9, 2021, an employee slipped on snow and ice while walking toward the building, falling to the ground and fracturing an ankle.",1
"An employee tripped over a bucket full of hot water, resulting in burns to their foot.",1
"An employee was moving a valve in the floor that had a handle wheel in the top. When he pulled it, the handle wheel spun and smashed his hand against a piece of metal angle iron, resulting in amputation of his right index fingertip.",0
A Slater Painting employee was working from a scaffold inside an elevator shaft between the first and second floor and was struck by a hammer drill dropped by an employee of another company that was working on the 15th floor. The employee sustained a broken arm.,1
"An employee was dismounting from the bumper of a pickup truck. As the employee was stepping off, the bumper components slipped out from under him, causing him to fall to the ground. The employee sustained a closed fracture of his left ankle, requiring surgery.",1
"An employee got out of a vehicle to close the warehouse garage when the vehicle moved and trapped the employee's legs under the front wheel, resulting in two broken legs.",1
"An employee was walking near the front of a store when they tripped over a curb and fell to the ground, resulting in an injury to their right knee that required hospitalization.",1
"An employee placed a stripper head down on a deck and pinched his thumb between the stripper head and the deck, resulting in a fractured thumb.",1
"An employee was working with a co-worker on a brake press bending stainless steel when he noticed one piece had not bent at a 90-degree angle. He went to hit it again at a small place in the middle, and when doing so, the machine crushed his fingers. The employee suffered a ring fingertip amputation and amputation of his middle finger.",1
"An employee was using a chain come-along to release a table form from the ceiling. As the employee was pulling the chain, the chain broke and struck the employee in the abdomen. The employee was hospitalized.",1
"A contractor was installing shingles on the roof of a one-story residential property that was under construction when they fell off the roof to the ground, resulting in a fractured back and hospitalization.",1
"An employee was attempting to take the temperature of a pet animal when the employee fell over the animal, resulting in an injured back.",1
"An employee was attempting to adjust the housing on the tip of a spray gun when the trigger was engaged, causing the ceramic coating to go through the employee's glove into his left index finger, resulting in an injury that required surgery.",1
"An employee was reaching for clothes to hang on a Z-rack when they tripped over the Z-rack and fell, resulting in a broken elbow.",1
"On February 9, 2021, an employee was walking to a vehicle when she slipped, causing her right ankle to break on the curb.",1
"An employee was operating a punch press when a piece of material became stuck in the machine. When the employee attempted to remove the material, the foot pedal was pressed and the machine amputated the employee's left index finger at the first knuckle.",1
"An employee was delivering bread and as the employee began to pull the ramp out of his truck to make his delivery, he lost his footing on the ice and his feet came out from underneath him. As the employee fell, the ramp he was holding came down on top of him. The employee was hospitalized with a bruised/swollen kidney.",1
An employee was bending a beam on a bending machine when the machine's foot pedal was pressed and the machine came into contact with the employee's fingers. The employee suffered fingertip amputations on his index and middle fingers.,0
"An employee was training a coworker to operate a stand-up forklift. The coworker attempted to turn away from the employee when the vehicle turned toward the employee, striking him and pinning him between the vehicle and a building column. The employee suffered a fractured left ulna and elbow that required surgery.",1
"An employee slipped and fell in the hallway, resulting in an injury to her right wrist that required hospitalization and surgery.",1
"A machine operator was walking around a machine to do a quality check of finished product. He turned a corner, stepped on a broom, and fell onto a chair sustaining a cracked rib.",1
"An employee was stripping a metal and concrete form when the bracket they were harnessed to failed and the employee fell 4-6 feet to the ground, resulting in injuries and possible hospitalization.",1
"On February 5, 2021, an employee slipped on snow and ice in a parking lot while walking to her car. She suffered ankle and tibia fractures and was hospitalized.",1
An employee was driving a stand-on electric pallet jack when it was struck by a reach forklift coming from an opposite lane. The employee was thrown off his pallet jack and sustained a broken left foot.,1
"An employee was doing quality control when they stepped back and tripped over a portable roll pusher and fell to the ground, resulting in a broken ankle that required surgery.",1
"An employee was walking in a parking lot when he slipped on ice and fell, resulting in a head injury.",1
An employee was operating a drill press when her glove was caught in the spinning tap while changing parts. The employee sustained a amputation to a finger on her left hand.,0
"An employee was filling in a grave site when they attempted to straighten out the grave marker. The marker fell on the employee's left leg, resulting in a fracture that required hospitalization.",1
"At 1:15 p.m. on February 10, 2021, an employee tripped on a cord on the floor next to a medical bed. She fell forward, landing on her left shoulder and right knee, and suffered a dislocation to the shoulder and a fracture to the tibia and fibula.",1
"On February 10, 2021, an employee was carrying a 2x4 down the stairs when the 2x4 got caught on the permanent handrail causing the employee to fall approximately 4 to 5 steps down the stairs. The employee was hospitalized with a head injury and a fractured skull.",1
"An employee was using a wireless remote to operate an overhead gantry crane with a load. The load moved toward him and pinned him against a die, breaking his pelvis.",1
"A driver was cleaning out his truck when his hand became caught in the truck's tailgate, resulting in a fractured bone in his hand.",1
"An employee slipped on ice in parking lot while on break, falling to the ground and injuring a hip.",1
"An employee was using a extruder for processing soy when an extruder screw became clogged with soy. The employee used a crowbar approximately 18 inches long to unclog the extruder when the extruder grabbed and pulled the crowbar, resulting in severe injury to the employee's right hand, including amputation of their middle, ring, and pinky fingers.",0
"An employee was cutting tilt rods for shutters using an electric table saw. The employee's left hand fingers contacted the blade, causing an amputation to the middle finger up to the nail bed with bone loss, soft tissue removal to the inner part of the index finger and a nail bed avulsion to the thumb.",0
"An employee fell while walking, and the employee's head struck the corner of a desk. The employee suffered a head laceration and three broken vertebrae and was hospitalized.",1
"An employee was moving a pallet jack from a loading dock onto a trailer when the pallet jack became stuck in a gap between the dock and the trailer. The employee attempted to pull the jack free of the gap when his hand became pinched in the equipment, resulting in a partial amputation of the right index finger.",0
An employee was parking an electric pallet jack. The employee's foot was pinned and crushed between the pallet jack and a parking barrier. The employee was hospitalized.,1
"An employee was walking into a store from a parking lot when they slipped and fell on ice, resulting in a spinal injury.",1
An employee was cutting a hole in a plywood wall using a rotary saw when the employee sustained a laceration to the leg that resulted in hospitalization.,1
"On February 10, 2021, an installer was positioning a 22-foot extension ladder in order to run a network line for a security camera. He fell about 8 feet to the ground. He was hospitalized with a tear to his Achilles tendon.",1
"An employee was delivering a curbside order to a customer when he slipped and fell on the curb, fracturing his left ankle.",1
"An employee was removing product from a roller conveyor when his right index finger was caught between the conveyor and a mobile slide, resulting in a distal phalange amputation.",0
"An employee was working on a vinyl oven. As the employee tried to remove a wrinkle in the material, the nub roller caught the employee's right little finger. All four of the employee's fingers were pulled into the machine and amputated.",0
"An employee was operating a rider pallet jack when it struck a pallet that was protruding from a racking bay. The pallet being carried by the pallet jack then twisted, pinning the ankle of a nearby temporary employee. The injured employee sustained a broken right ankle.",1
"An employee slipped and fell on ice in the parking lot, resulting in a concussion that required hospitalization.",1
"An employee was on an elevated platform, turning valves to prepare for cleaning the melter. He lost footing and fell 6 to 8 feet to the main floor. The employee sustained bruised and/or cracked ribs.",1
An employee was operating a liftgate when the end of his right middle finger was partially amputated.,1
"An employee was grinding on a metal resin pan and a spark ignited a 5-gallon bucket of solvent. The burning solvent splashed onto his right leg, causing burns to the right leg, right hand, and right arm.",1
"An employee slipped and fell on ice in a parking lot, suffering a broken left leg.",1
"An employee tripped while on a ladder and missed the bottom rung, falling from a height of 1 foot to a concrete floor and resulting in a broken leg.",1
An employee was drying a conveyor belt when her hand got caught on the gears underneath. She sustained lacerations to the hand and fingers.,1
An employee was using a radial table saw when his glove became caught in the blade pulling his right thumb into the point of operation and causing a thumb tip amputation. The saw was unguarded at the time.,0
"An employee was checking a unit load tag when he was struck by the boxes on an approaching forklift and fell to the ground, resulting in a left hip fracture.",1
"The sheaves of the crane were frozen due to ice and snow conditions, which caused a backlash with the auxiliary cable of the crane. The operator attempted to straighten out the backlash on the superstructure near the drum. The frozen sheave freed itself, allowing the cable to run, and the operator's right arm got tangled in the cable. The operator sustained an open fracture of the humerus and a dislocation of the radius.",1
"On February 10, 2021, an employee slipped and fell on ice while performing a home visit, resulting in a fractured leg that required hospitalization.",1
"An employee was working on replacing conduit inside a pad-mounted transformer when the employee sustained an electric shock, resulting in burns to the right hand and hip.",1
"An employee was taking down inventory from the aisles in the warehouse with a power industrial truck when the employee fell approximately 30 feet from the vehicle, sustaining a broken wrist and injuries to the lung, head, leg, and ribs.",1
"An employee on an 8-foot step ladder was reaching through a rough-framed wall with a reciprocating saw to trim foam that was installed over a staircase. Due to vibrations caused by the saw, the ladder moved away from the wall. The employee fell through the wall and landed on the staircase approximately 8 to 10 feet below. During the fall, the employee broke the handrail on the staircase. The employee sustained a fractured left ankle.",1
An employee was feeding metal into a brake press. The machine partially amputated two of the employee's fingers.,0
"An employee was inspecting the ropes and winches for a work barge. The employee released a winch so a rope could be loosened, and the winch arm struck and fractured his right forearm. He was hospitalized.",1
"On February 10, 2021, an employee was performing preventative maintenance on a mail machine and removed the bottom panel. As he knelt down to retrieve mail that had fallen out of the machine, his knee gave out, causing his hand to come into contact with the machine and resulting in an amputation to the right index finger just below the first knuckle.",0
An employee had been disassembling glycol hoses. The employee fell over the hoses and broke an ankle.,1
"While walking, an employee tripped and fell onto their left side and sustained a fractured hip requiring hospitalization.",1
An employee was on the back of his truck unstrapping his load for delivery when he slipped on ice and fell 5 feet to the ground. The employee sustained neck and pack pain.,1
An employee was walking out of a building near the service area and fell on an icy walkway. The employee sustained injury to left side and required surgery for the left hip injury.,1
"An employee was walking back to their patrol vehicle, slipped on ice, and fell. The employee sustained an impact injury to the head causing a brain bleed.",1
"An employee was moving a cement truck into the shop. He discovered that the brakes were frozen and would not release. He got a small torch and crawled under the truck to thaw out the brakes. When the brakes thawed out, the truck rolled backward, pinning the employee to the ground. He was hospitalized with internal bleeding.",1
An employee was using a sledgehammer to remove a keeper when a metal piece broke off and struck his right eye.,1
An employee was testing a breaker when the tester faulted and caused an explosion. The employee sustained burns to his left arm and was hospitalized.,1
An employee was prepping the floor using an angle grinder to cut a door jam. The grinder kicked back and struck his left hand causing an amputation to the ring finger and a laceration on the index and ring fingers.,0
An employee was using a rebar shearing machine when it amputated the tip of his left index finger.,0
"An employee was standing on the elevated platform at the wood breaker machine. The platform grate became detached and dropped 7 feet to the floor with the employee standing on it. The employee was hospitalized for 3 broken ribs, a punctured lung, and a lacerated spleen and required surgery.",1
"An employee was observing a wood chipper. A log cutoff was jammed in the conveyor belt coming from the merchandiser to the chipper. While working to free the jam, the employee's finger got caught between the log and the side of the conveyor. His left ring finger was amputated.",0
"An employee was offloading vessels from a truck when the employee's right pinky finger was caught between a vessel and metal cage, resulting in a fingertip avulsion and partial amputation.",0
"A service technician was on a ladder, installing an enclosure for a communication wire when he fell approximately 7 feet to the concrete surface below. The employee sustained a fractured tibia.",1
"An employee was walking in a parking lot when they slipped and fell on black ice, resulting in a broken arm.",1
"An employee was on a ladder, helping install a mirror. The employee fell off the steps of the ladder, landing about 6 feet below and suffering a broken pelvis.",1
"An employee was walking between buildings in the gravel when he slipped and fell on frozen gravel, resulting in a broken right femur.",1
"An employee was working at the back of a tanker trailer with a handheld impact tool. A flash fire ignited due to the friction from the impact tool and the fumes mixing, resulting in 2nd-degree burns to approximately 15% of the employee's body.",1
An employee was walking toward the injured employee when they tripped on loose floor tile in a supply room and fell on the injured employee. The injured employee sustained a left leg and knee fracture. The employee who fell was not injured.,1
An employee was using an articulating wheel loader to unload a customer's truck. The employee was backing the loader into a position parallel to the customer's truck when the loader struck the auger on the rear of a parked fertilizer truck. The employee was hospitalized with injury to the right side of their lower back.,1
"An employee placed a stepladder onto a golf cart and the stepladder contacted the accelerator. Upon attempting to stop the golf cart, the employee got caught and pinned between the golf cart and a wall, resulting in a laceration to the spleen.",1
"An employee walked around a truck to unlatch the hood and check the oil when he slipped on ice and hit his head on the ground, resulting in a head injury.",1
An employee was operating a milling machine when it amputated his fingertip at the first knuckle.,1
"An employee was getting out of a skid steer loader when they slipped on ice and fell between the loader's arms and the cab of the tractor. While falling, a lever was pressed that caused the arms of the skid steer to lower and crush the employee between the cab and the arms. The employee suffered three broken ribs, a collapsed right lung, a fractured C7 vertebra, lost feeling/use of the right arm, and broken blood vessels in both eyes.",1
An employee was unlocking a padlock on a customer's gate when he fell to the ground and injured his hip. The employee was hospitalized.,1
"An employee was driving a forklift and assisting a 3rd party with securing an AC unit on the box truck. The employee dismounted the forklift, which then rolled into him, catching the employee between the forklift and the box truck. The employee sustained a crushing injury to the torso.",1
"An employee was installing fabricated sheet metal siding on a new building under construction while on an extension ladder. The employee fell from the ladder to the ground resulting in a head injury, concussion, and a head laceration.",1
"While operating a cheese shredder in auto production mode, an employee's right index finger was crushed by the pusher arm.",1
"An employee was cutting metal banding from a bundle of aluminum bars when a bar fell, smashing the employee's finger against a rack and resulting in amputation.",0
An employee fell while walking outside on the sidewalk and was hospitalized for a fractured hip that required surgery.,1
"An employee was disassembling a stocking cart when his pant leg was caught on the cart, causing the employee to trip and fall. The employee sustained two fractured ribs.",1
"An employee was sanding the end of a 1-inch-wide, 1/4-inch-thick, 12- to 13-inch-long rod on a pedestal grinder using a sanding disk attachment. The sanding disk caught the rod and pulled it toward the machine, causing the employee's gloved left hand to come into contact with the sanding disk. The employee's thumb tip was amputated to the cuticle.",0
"An employee had climbed up a ladder to backstock a 5-pound bag of coffee onto shelving. After placing the item on the shelf, she was descending the ladder and missed a step. The employee fell to the concrete floor and sustained a left hip fracture.",1
An employee was maneuvering a scissor lift while walking alongside the unit. The employee's foot was struck by the machine's front tire and he fell to the ground.,1
"An employee was troubleshooting a press when the spring of the press released the bottom plate and smashed the employee's right index finger between the top and bottom plate. The employee sustained a fracture to the finger, resulting in amputation to the top knuckle.",0
"An employee slipped on ice on a shipyard pier and fell, suffering a broken leg.",1
"While an employee was working on a farm tractor, the tractor started and the belt amputated the employee's index fingertip.",0
An employee was using an aerial lift to repair overhead cable lines. A tractor trailer drove by on the road below and made contact with the power lines creating an electrical arc that struck the employee. The employee sustained electrical shock and burns to the right arm and lower right region of their back. The employee was hospitalized.,1
"An employee was operating the blow mold machine when the employee's fingers were caught in the machine, resulting in amputation of four fingers and a fractured arm.",1
"An employee was dispensing propane into a customer's tank when the employee sustained chemical burns to the left hand, left leg, and part of the abdomen from the propane.",1
"On February 12, 2021, an employee was clearing a jam on a table saw and crushed his right little finger.",1
An employee was cutting corrugated cardboard with a bandsaw when the blade lacerated a finger and amputated a fingertip.,0
"An employee was working the release of a fifth-wheel pin. As he pulled the release pin, he lost his balance and fell from the truck, resulting in hospitalization for a broken right hip.",1
"An employee was climbing inside of a truck cabin, slipped and fell, resulting in fractured vertebrae.",1
"An employee was accessing a valve using a ladder when the ladder slipped, causing him to fall six feet. The employee sustained a head laceration, broken ribs, and a punctured lung.",1
An employee was closing a metal gate when the wind threw the gate closed and severed the tip of the employee's left middle finger.,0
"An employee was working on-site crushing old concrete. He was standing near the hopper of the crusher, pulling out debris. He signaled to the excavator operator to dump the next scoop. A large piece of concrete slid and crushed his left hand against the side of the hopper.",1
"On February 12, 2021, an employee was unjamming a wrapper machine when the blade rotated and contacted the employee's fingertip resulting in an amputation.",0
"An employee sat down on a rack. The rack shifted, crushing and fracturing his right foot.",1
Five employees were conducting a maintenance check of an auxiliary safety valve. The valve failed and released pressurized steam. One employee fell while evacuating the area and suffered a knee injury. He was hospitalized.,1
"An employee was troubleshooting an electric generation turbine when fuel oil ignited, burning the employee's arms and torso. The employee was hospitalized.",1
An employee was operating the south-end facer when a pneumatic clamp that holds the pipe down engaged. The clamp came down on the employee's right arm and fractured it.,1
A maintenance employee lost his balance and fell from a step ladder to the floor while checking a heating unit in the ceiling. The employee sustained fractures to his right ankle and tibial plateau.,1
"A CNC operator was operating a machine and entered the point of operation, sustaining an amputation to the left middle fingertip.",0
"An employee was leaving work with a coworker. The employee stepped on a curb, then slipped and fell. Their coworker also slipped and fell onto the employee's right ankle. The ankle was fractured in three places.",1
An employee was on a roof assisting with uploading materials and was also giving signals to a forklift operator. Insulation slid on the forklift's forks and struck the employee who then fell off the roof 12 feet to the ground. The employee suffered a back injury and a cut above his left eye.,1
An employee was dislodging a part on a zinc diecast machine and sustained crushing injuries to the right hand and an amputation of the right middle finger. The employee was hospitalized.,1
An employee was stacking a pallet on top of a load of stacked pallets. The pallet fell on top of the employee's chest as the employee was handling the pallet.,1
"An employee was preparing the roof for solar panel installation. The employee was transitioning from an extension ladder to the roof when he slipped off the ladder and fell approximately 12 ft. to the ground, resulting in hospitalization for four broken ribs and a concussion. The conditions at the time included snow and ice.",1
An employee was delivering mail to a customer and fell from the stairs. The employee was hospitalized with right leg injuries.,1
"An employee was on a six foot ladder and was reaching for a box on the ceiling when he lost his footing and fell to the floor, sustaining fractured ribs.",1
An employee was descending an extension ladder when the bottom of the ladder slid on ice away from the building and the employee fell to the ground. The employee sustained a broken left arm.,1
An employee was stocking shelves and while lifting a box heard a crack in their back. The employee was hospitalized with a broken back.,1
"On February 13, 2021, an employee was working to unjam a pelletizer machine when their finger was caught by an auger blade and partially amputated. The machine had been turned off, and a guard was open at the time of the incident.",0
"An employee was changing the battery on a forklift using a battery changer. The employee moved the forklift and was caught between the forklift and the battery rack, resulting in fractures to both ankles.",1
An employee was installing electrical equipment when an arc flash burned his hands.,1
"An employee was descending a set of stairs after leaving a building. He fell to the concrete sidewalk below, suffering shoulder and head injuries.",1
An employee was installing thermal panels while on a scissor lift. The employee was hospitalized after losing consciousness due to ammonia exposure.,1
An employee was operating a shear press. The shear amputated the employee's left index finger.,0
"An employee slipped and fell on ice when she walked over to a gas pump to help a customer, resulting in a broken left arm.",1
"An employee was walking down some stairs when he fell, landing on his back. He suffered back and rib injuries and was hospitalized.",1
"An employee walked back to a company vehicle in order to retrieve tools and equipment. The employee was found unconscious, having sustained a head injury.",1
An employee was hospitalized after falling while walking into the plant.,1
An employee fell approximately 3 feet from a ladder to the ground and was hospitalized for a compression fracture of the L2 vertebra.,1
"An employee stepped off of a stair onto the parking lot pavement, slipped on black ice, and fell breaking their left tibia.",1
"On February 13, 2021, an employee was using a grinder/sander on a part. The machine lacerated the employee's left wrist.",1
"An employee was jacking up a trailer to change the tires. The jack shot out from under the trailer and struck the employee in the face, causing multiple fractures and damage to the right eye.",1
An employee was doing preventive maintenance on a cook pot. He had greased the motor shaft and was about to clean off the fitting when a set screw pinched his right index finger between the shaft and the grease fitting. He suffered a laceration and an open fracture to the fingertip.,1
A home health care worker was bitten on the left hand by a resident. He was hospitalized.,1
"An employee was working at a bander station. She was asked to help a forklift driver separate a unit of wooden MDF panels which had a bad panel on the 17th panel from the top. The employee was standing on the left side of the forklift, giving directions on fork positioning. The forklift pushed 16 panels from the stack which fell on top of the injured employee's leg. She was hospitalized with two broken bones on her left ankle and torn ligaments that required surgery.",1
"A maintenance employee was fixing a bound chain on a gondola/rail system when the employee's left  pinky finger was crushed by a rail and chain, resulting in amputation.",1
"An employee was segregating sides of beef into beef rails. A side of beef fell; bones in it lacerated the employee's left shin, damaging the muscle. The employee was hospitalized.",1
"An employee was skiing in a wooded area when a powder covered stump caused him to fall into a tree, sustaining broken ribs and a partially collapsed lung.",1
An employee slipped on ice and snow while refueling a truck. The employee fell to the ground and suffered an injured right leg.,1
"An employee tripped and fell over a pothole in the parking lot, resulting in a ruptured spine and a fractured right arm.",1
An employee fell from the rear of a delivery trailer to the ground while moving products around preparing for delivery. The employee sustained a broken arm.,1
"On February 15, 2021, between 4:30 and 5:00 p.m., a TCU Facilities employee was changing out some stained ceiling tiles in an office. He was standing on the fourth rung of an 8-foot fiberglass stepladder, removing the tile, while a coworker on the floor took the old tile and handed him the new tile. He had to disconnect the ceiling grid to remove a tile. It came loose suddenly and his right foot slipped off the ladder. His coworker caught him, but his left foot got caught in the steps of the ladder. He suffered a dislocated left ankle and was hospitalized, undergoing surgery.",1
An employee's left thumb tip was amputated when the lid of a compactor closed on the finger.,1
"An employee was clearing snow using a skid steer and a bucket attachment when the skid steer struck a culvert. The safety bar of the skid steer struck the employee in the abdomen, resulting in hospitalization for blunt force trauma.",1
"On February 15, 2020, after shoveling snow in the yard, an employee went into the office and stated he felt ill. The employee was hospitalized due to suffering a heart attack.",1
An employee fell on pavement while walking to a vehicle. The employee suffered hip and elbow fractures.,1
An employee was handling a 55-gallon drum of material on the floor. His right middle finger was pinched between the drum top and a hard piece of metal. The fingertip was amputated.,0
"An employee was placing bungee cords on beef hides before they reach the side puller. As the employee was placing the bungee cord on the hides, her glove got stuck on the bungee cord hook. As the line progressed, the employee was pulled around the guardrail and to the ground, resulting in fractures to the right tibia and fibula.",1
"An employee was taking sandbags to an emergency room ambulance bay. He slipped on ice and fell, breaking his left arm.",1
"An employee was transporting cabinets from the truck on the first floor to the third floor. The employee fell in an unguarded stairwell and broke three ribs, three teeth, the right wrist, and nose.",1
"An employee fell from a loading dock. Her face struck a dumpster and/or the pavement, and she suffered a split-open nose, a broken femur, and a cut to the head.",1
"An employee was changing the propane tank on the forklift. After changing the tank, his right pinky finger was pinched between the propane tank cradle and the propane tank, resulting in fingertip amputation.",0
"An employee fell from a concrete platform to the ground, suffering a broken rib and a broken right wrist.",1
"An employee was walking on a plank, part of a walking surface being used during construction of a structure. The plank flipped up and the employee fell about 8 feet to the ground, hitting his head. He suffered a brain bleed/swelling.",1
"An employee was working at the production area on the dough forming line. The employee was waiting for the next batch of dough to be run and went to scrape the excess dough. The employee dropped his dough scraper into the hopper. While trying to get the scraper, his right hand was severely lacerated and crushed by the rotating star cutters.",1
"An employee was sweeping and shoveling chips, wood debris, and sawdust around a chipper. A wood slab on the chipper's conveyor hit the employee in the head. The employee fell to the concrete floor and suffered head trauma, orbital and nasal fractures, and a forehead laceration.",1
"An employee slipped on ice while walking in a crosswalk. The employee fell to the pavement, suffering a possible fracture to the right ankle.",1
"An employee was performing his duties and was struck by a horse, resulting in fractured ribs.",1
"On February 15, 2021, an employee was lighting the propane burner in a food truck when the flames came out towards her. The employee was hospitalized with second degree burns to both legs, arms, and on the side of her face.",1
An employee was working on a box-making machine. The machinery caught his arm and severely injured it.,1
An employee slipped on ice at a work site and fell forward to the concrete floor. He suffered two jaw fractures and a ruptured ear drum.,1
"An electrician was replacing a faulty proximity switch in the communication control panel with a technician standing behind. After the electrician pressed the reset button on the control panel, a solenoid valve opened and released steam that contacted the technician who was hospitalized with burns to the left side of the face and back.",1
"An employee was taking out the garbage when the employee slipped on ice and fell to the ground, sustaining a compound fracture to the right tibia.",1
"An employee was shackling a cow's leg when the employee's mesh glove was caught in the shackle chain, resulting in a partial amputation of the left ring finger pad.",1
An employee was loading pallets into a semi trailer using a pallet jack. The employee's right big toe was caught between the pallet jack and the trailer wall.,1
"An employee slipped on ice while walking from a gravel surface to a cement one. The employee fell down, suffering a broken lower right leg.",1
"An employee was clearing debris from the photo-eye of a sticker unscrambler when his right index finger was crushed by the press, resulting in amputation of the fingertip.",0
"An employee was standing on a ladder while insulating walls when the employee fell off the ladder to the concrete floor below, resulting in fractured vertebrae and a fractured rib. The employee was hospitalized.",1
An employee was riding a terrain feature at a ski resort when he fell and broke his left hip. He was hospitalized.,1
"An employee was trying to remove caps from the belt of a capping machine. The employee's finger was caught between the belt and roller on the assembly line, resulting in an amputation of the right pinky fingertip.",0
An employee used a scrap piece of rubber to remove a piece of rubber that was caught in the blades at the cutting table. The scrap rubber slipped and the employee's left hand contacted the blade resulting in amputation of the middle finger between the middle and top knuckles.,0
"An employee was pulling a delivery hose from a bobtail trailer and tripped over the hose. The employee pulled a muscle in his right calf, resulting in hospitalization and surgery.",1
An employee was responding to a gas leak/propane odor call at a residence. An explosion occurred in the residence and the employee sustained burns.,1
An employee slipped on ice while walking to his vehicle. He fell to the ground and suffered a broken leg.,1
"An employee was walking toward the cafeteria when she tripped and fell to the floor, resulting in an injury to the right patella that required surgery.",1
A temporary employee was using a stand-up forklift when his left lower leg was trapped and crushed between the forklift and a steel cone. He was hospitalized.,1
An employee was removing a core block with a 30-pound copper hand mallet and sustained the amputation of their right ring fingertip.,0
An employee was cleaning filter screens in the mozzarella department. A tray fell out of the middle of the rack being cleaned. The employee attempted to catch the rack and their fingertip was caught between the tray and the frame of the rack resulting in a fingertip amputation.,1
An employee was working from a 10ft. A-frame ladder applying drywall tape and fell from the ladder to the floor. The employee suffered head trauma.,1
"An employee was walking towards the receiving area entrance from the parking lot when they slipped on black ice. The employee grabbed onto an orange barrel to stop from falling and twisted their leg, resulting in fractures to the tibia and fibula.",1
An employee fell while loading square haybales into a trailer. The employee suffered a fracture to the tibia at the knee.,1
An employee was using a nail gun to install molding in a closet. The nail gun shot a 1 1/2-inch brad nail into the employee's chest.,1
"A mail carrier was exiting her vehicle in the parking lot when she stepped in mud and fell to the ground. The employee was hospitalized with a broken right ankle, requiring surgery.",1
"An employee was lowering a trash bin that was attached to the forks of a forklift. As the hopper rolled back into the original position, it crushed the employee's left thumb tip resulting in a partial amputation.",0
"An employee was kneeling down to work on a condensate line. While his left hand was on the mid-rail section of a railing system, it popped out of the wall and he fell. He landed on a concrete slab on a lower level, suffering a broken bone in his left wrist, two broken bones in his right knee, and a torn ligament in his left knee.",1
"An employee was operating a stand-up forklift inside a warehouse. The forklift crashed into a wall, and the employee's right foot was crushed between the forklift and the wall.",1
"An employee was working in the receiving room unpacking boxes when the employee tripped over a box. The employee fell to the concrete floor, sustaining a fractured hip.",1
"An employee was taking a retirement community resident to a medical appointment. While he was helping her into the building, she lost her balance; as he tried to help her, he fell to the pavement and broke his left hip.",1
An employee was adjusting a clamp when the clamper came down and amputated the tip of his left index finger.,0
"On February 17, 2021, an employee was completing rounds through a natural gas planet when he slipped and fell on an ice spot. He was hospitalized, having suffered a broken left hip.",1
"An employee was attaching a powered industrial truck to a trailer in a parking lot. The employee slipped on ice and fell to the concrete, suffering a broken right arm.",1
"On February 17, 2021, at 4:00 p.m., an employee performing roofing activities fell approximately 15 feet from the edge of the roof to the concrete surface below resulting in a fracture to their back and hospitalization.",1
"An employee slipped and fell to the ground, suffering an elbow injury that required hospitalization and surgery.",1
"An employee fell in a locker room and was found unconscious on the floor, having suffered an injury to the back of the head.",1
An employee was operating machinery when it pulled in the employee's left middle finger. The employee suffered a fingertip and nail amputation.,0
"An employee was operating a powered industrial rider/tugger. The employee was thrown from the vehicle and landed on a guardrail, suffering broken ribs and a possible punctured lung.",1
"An employee had driven a wrecker out to a job site to remove a piece of heavy equipment that was stuck in mud and wedged against a building. The employee ran winch cables, adjusted the boom, attached chains, and set up a snatch block. He began pulling the equipment out of the mud. A chain that was pulling on the heavy equipment broke, and the employee was struck in the chest by the snatch block. He sustained five broken ribs and a punctured lung.",1
"An employee was walking from a reception area to a lobby. While opening a door, the employee slipped on a wet floor and suffered a broken kneecap.",1
"While taking trash out to the dumpster area, an employee slipped on ice and fell to ground resulting in a fractured right knee.",1
"An employee fell through a termite-damaged roof, landing on the ground about 12 feet below. The employee suffered an injury and was hospitalized for pelvis bone repair surgery.",1
"At about 4:30 a.m. on February 17, 2021, an employee was cleaning underneath a running conveyor. The employee's right glove was pulled into the conveyor as the employee was cleaning flour from the surface of the conveyor, causing the right hand and forearm to become caught between the conveyor and the surface underneath. The employee suffered a broken wrist/forearm.",1
An employee was welding a cylinder into the back of a garbage truck. The employee's right index finger was caught in a pinch point near a screw and was partially amputated.,1
"An employee was descending a power pole. He began transferring his primary safety to underneath a communication cable; his secondary safety had not clipped in and he fell to the ground about 15 feet below. He suffered a broken left wrist, a skull fracture at the base of the neck, and an injury to the left shoulder.",1
"On February 17, 2020, an employee slipped and fell while walking up stairs. He suffered bruising to the ankle and back and was hospitalized.",1
"An employee was walking from the kitchen to the outside when they slipped on black ice on the stairs and fell, resulting in broken ribs and other fractures that required hospitalization.",1
An employee was working at a rail switching location when he slipped and his thumb was crushed between two rails.,1
"An employee slipped on ice and fell onto their right side, resulting in fractured ribs and a collapsed lung.",1
"An employee fell from a platform, hit his head on the ground and was hospitalized with head trauma.",1
"An employee was checking an HVAC unit in a ceiling. The employee closed the valve to the supply line, then began to remove the valve from the line. Once the valve was loose, hot water pressure caused the line to shoot out from the unit. Hot water caused third-degree burns to the employee's left hand and arm. He was hospitalized.",1
"At about 11:30 a.m. on February 17, 2021, an employee was clearing cardboard pieces from a flatbed truck. He began to slip on a piece of cardboard and jumped off the truck landing on the concrete surface about 6 feet below, suffering a right leg fracture above the ankle. He was hospitalized.",1
"An employee was cutting an iron waterline pipe with a chop saw. The saw kicked back and struck the employee, lacerating the employee's face and neck and fracturing the jaw and teeth.",1
An employee operating a patty machine partially amputated their thumb.,0
An employee was changing a belt on a blower motor. The machinery started and the pulley pulled in the employee's right glove. The employee was injured and underwent a surgical amputation of the right ring finger.,0
An employee was cutting a notch in a plastic battery box with a razor knife. The knife slipped off the box and cut three tendons in his left knee.,1
An employee was retrieving a fallen piece of product from a conveyor. The conveyor belt entangled his left hand and pulled in his arm up to the elbow. The arm was amputated between the elbow and the shoulder.,1
"An employee was walking to an apartment to deliver mail. She slipped on ice and mud on a walkway and fell, suffering a broken left leg.",1
"A driver was walking across the parking lot of a truck stop and slipped on ice. The driver fell to the ground, sustaining a fractured hip.",1
"An employee slipped and fell while coming down a ladder, suffering a broken right ankle.",1
"An employee was walking across a skywalk and slipped and fell on the tile floor, resulting in a broken shoulder.",1
"An employee slipped and fell in a parking lot, suffering a broken left leg. The employee was hospitalized.",1
An employee was loading a postal truck in a docking area. His foot slipped on a wet piece of metal and he suffered a broken leg.,1
"An employee was exiting his truck in a parking lot. He slipped and fell on snow and ice, suffering a broken femur. He was hospitalized and underwent surgery.",1
"An employee was walking on loose gravel, tripped and fell, his head striking the ground. He suffered head injuries.",1
"An employee was using a sewer auger machine to clear a blocked drain at a residence. He had inserted the auger into the outside clean-out when he slipped and fell into a drainage culvert, suffering fractures to the right tibia and fibula. He was hospitalized, requiring surgery.",1
"An employee was driving an easement machine between two houses to reach the back yard. As the machine moved from concrete to grass, it tipped over to the left, catching the employee's left hand against a street light. The employee suffered lacerations to the hand. As well, the employee's face struck the controls, causing a partial loss of front teeth. The employee was hospitalized and underwent mouth surgery.",1
"An employee was descending a ladder when it shifted at the base. He fell to the ground, suffering a broken leg.",1
"An employee was dismounting an excavator after loading it onto a lowboy trailer. The employee slipped, but managed to catch the grab handle to avoid falling. The sudden stop ruptured a cyst in the employee's abdomen.",1
A pallet jack operator suffered a broken left leg after colliding with a pallet load on a forklift. The employee was hospitalized.,1
"An employee got up from her desk, tripped over a box that was next to her work station, and fell  resulting in a broken hip that required hospitalization and surgery.",1
"An employee fell to the ground while pushing a stuck vehicle in a parking lot. The employee's ring finger went into the tire wheel and brake caliper, causing the amputation of the fingertip.",0
"An employee was using a chisel and hammer to separate and remove a bearing in the axle of a road scraper machine. One of the tools struck his left thumb, resulting in the partial amputation of the thumb tip at the end of the nail.",0
"An employee was training another employee to use a pallet jack. The pallet jack rolled into the first employee, who suffered a broken pelvis and ankle.",1
An employee was unjamming a bagging machine when the cutter blades amputated their right middle finger at the first joint. The machine was guarded at the time of the incident.,0
An employee was wrapping a pallet when they were struck in the ankle by the fork of a forklift. The employee sustained a fractured ankle.,1
"An employee was working from an A-frame ladder, adjusting a log with a peavey. The ladder tipped over and the employee fell to the ground, suffering a broken hip.",1
"An employee was walking to an extrusion machine to clean minor water accumulation on the floor. The employee slipped on the water and fell, suffering a back injury.",1
An employee slipped on a frozen surface and fell while climbing into the trailer of a semi. The employee suffered broken ribs.,1
An employee was cutting pork with a meat bandsaw. The saw amputated the tip of his right index finger.,0
"An employee was taking out the garbage for a client and slipped and fell on a snow-covered sidewalk, resulting in a broken hip.",1
"A 300-pound intermediate pressure stop valve disk was on its edge, braced against a 6-by-6 timber, while an employee measured the internal seat angle with a protractor. He had reached into the valve disk bore with his right hand, from the bottom side of the disk. As he was removing his hand, the timber slid away, and his index finger was caught between the disk bore and the protractor as the disk slid down the timber. He suffered a partial amputation to the finger.",0
An employee was entering the motor room vault at the top of a ski lift. The employee became entangled in conveyor equipment that transported riders to the snow-tubing lanes. The employee suffered multiple fractures to the face and left arm.,1
"An employee was replacing a keystone valve on the bentonite mixer. While he was testing the mixer's operational status, his left pinky finger was caught in the valve, resulting in a partial amputation.",1
"An employee slipped on snow-covered pavement in a parking lot and fell, suffering a broken right hip.",1
"On February 18, 2021, an employee had just laid a truss assembly on the floor and was walking over to the other side of it when he tripped over a metal truss connector. He fell to the floor and broke his left foot. He was hospitalized.",1
"An employee slipped on a trash bag while stepping into a corridor. She fell to the concrete floor, suffering a head contusion and injuries to the hip or leg.",1
"An employee was walking down the ramp toward the parking lot, slipped on a patch of ice, and fell fracturing their hip/femur.",1
"An employee's fingers became caught between a coil machine cutter stand and metal, resulting in fractures to his fingers.",1
An employee was using a track welder. A spark landed on his shirt and it caught on fire. He suffered burns to the chest and left underarm.,1
"An employee slipped on ice while walking to his car, falling to the asphalt road surface and suffering broken ribs on the right side, as well as tearing a lung.",1
An employee struck a stack of five pallets while moving pallets with a pallet jack. The employee suffered a broken lower right leg.,1
"An employee was working from a ladder when the ladder slid out. The employee fell from the ladder, requiring hospitalization for a broken leg.",1
"An employee was carrying a bag of salt to spread on a driveway. He slipped on ice and fell to the pavement on his back, suffering fractures to the T-11 and T-12 vertebrae.",1
"An employee was working on top of a flatbed trailer in the receiving bay, unchaining coils from the trailer. The employee turned, tripped over a J-hook, and fell off the side of the trailer to the ground, striking his head on steel racks. The employee sustained a fracture to his head, as well as contusions and lacerations.",1
An employee was closing a vault door. The door caught and severely lacerated her hand.,1
"An employee was disconnecting a liquid transfer hose from a transport tank and noticed a leak from the valve at the end of the hose. As he checked the valve and rotated the valve handle, the mechanical stop tab broke, causing liquid propane to be released. The employee sustained burns to the abdomen, right knee, and right elbow.",1
"On 2/19/2021, an employee was near the top of an extension ladder attempting to ""blow out"" a clogged milk line. There was ice on the floor where the ladder was standing. The ladder slipped on the ice, and the employee fell onto products/equipment, a concrete barrier pole, and the floor. The employee was hospitalized with fractures to the left tibia, nose, left side ribs, and knee cap.",1
"At about 1:30 p.m. on February 19, 2021, after delivering a parcel on the second floor of a building, a postal carrier was returning to the first floor to begin delivering letters. He slipped while walking downstairs, landed on his side, and bounced down a few steps, breaking six ribs and his shoulder blade.",1
"After removing the auger from the kelley of a drilling rig, an employee was setting the kelley onto the cleanout bucket. The employee was trying to insert the pin to attach the cleanout bucket to the kelley and cleaning the pin hole with his left index finger on his left hand. The kelley was lifted while his finger was still in the pin hole, causing the amputation of the finger at the first knuckle.",0
"An employee fell on ice in a parking lot, suffering an ankle injury.",1
"An employee was walking into the store when they slipped on an icy sidewalk, resulting in a sprain/tear in the left knee.",1
"A driver was conducting a pre-trip inspection of a tractor trailer when they slipped on ice and snow and fell, resulting in a subdural hematoma that required hospitalization.",1
An employee was burned by scalding water while standing under a case washing machine.,1
An employee jumped off the back of a pickup truck and suffered a broken right heel. The employee was hospitalized.,1
An employee was helping prepare a concrete form bed in a manufacturing facility. The employee's right middle finger was pinched between a magnet and the metal form bed while he was cradling it to hold it in place.,1
"An employee slipped on black ice in the parking lot and fell, suffering a broken left arm.",1
An employee was walking down built-in scaffolding steps. He slipped on the fourth step and landed on his back against the steps while sliding down. He suffered a lower back injury.,1
"On February 19, 2021, an employee was backing up an off-road forklift onto a trailer for transport when the forklift's right front wheel came off of the trailer, causing the forklift to overturn. The employee was hospitalized for a laceration to the back of his head and broken ribs.",1
"An employee was shoveling snow at a delivery location, experienced chest pains, and was hospitalized for a heart attack.",1
An employee was exiting the C deck of an auto rack railcar when he slipped and fell to the pavement 12 feet below. He suffered a broken left ankle and was hospitalized.,1
"An employee was walking in an aisle past bales of stacked polyurethane foam. The stack fell over and the top bale (weighing about 1,200-1,500 pounds) landed on the employee, pinning her under it. She suffered multiple ankle, leg, and arm fractures and possible face injuries.",1
"An employee was preparing to leave a job site and was picking up traffic cones when he slipped on black ice and fell to the ground, resulting in a broken ankle.",1
"An employee was loading a piece of granite onto a 3' high truck bed. The employee slipped and fell to the ground, breaking his right leg.",1
"An employee was working on a drilling rig floor. A piece of ice that had frozen to the drilling mast melted and fell off, landing on the employee's back and breaking three vertebrae.",1
"An employee fell from a scaffold to the concrete floor 8 feet below, suffering a fractured/dislocated elbow.",1
"An employee slipped and fell on a kitchen floor, resulting in a knee injury that required hospitalization.",1
"On February 19, 2021, an employee was loading a one-gallon container of antifreeze into the trunk of a delivery vehicle, slipped on ice in the parking lot, and fell sustaining a fractured left hip.",1
The injured employee came over to assist another employee who was having a seizure. The injured employee lost balance and struck her head on a self-checkout counter. The injured employee was knocked unconscious and hospitalized.,1
An employee was walking in the main lobby when she tripped on carpet and fell fracturing her left femur.,1
"An employee was loading a skid tank onto a winch truck. The employee was removing a rock from under the tank when the tank came down on the employee's hand, causing finger amputations.",1
An employee fell while walking from a carpeted floor to a tiled floor. She landed on the floor and suffered a broken femur.,1
"An employee was in the cab of an excavator, using it to remove sheet pilings. The soil under the excavator gave way and the excavator fell on its right side. The employee suffered head, neck, and shoulder injuries.",1
"An employee was cleaning a machine on a pasting department line in an automotive plant. The employee's hand was caught between a conveyor belt and a roller, causing a partial finger amputation.",0
"An employee was in the back of a truck, trying to get a transformer un-wedged from underneath an object. His hand slipped and he fell off the back of the truck, landing on his back. He was hospitalized, suffering from lower back pain and pain down his right leg.",1
"An employee was installing a metal air handler hood. It would not fit properly, so he wedged a 2-inch by 4-inch piece of wood in. As he was about to press it with a scissor lift, the wedge slipped out and the hood caught his left middle finger amputating it at the knuckle.",1
"An employee was setting up a lamination line when they attempted to clear a flag that was on the impression roll. The employee's finger contacted the impression roll, resulting in a fingertip amputation.",0
"An employee was working on a roof while installing a membrane roofing system over an existing metal roof. The employee was pulling a generator cord out of the way when he fell off the roof edge approximately 20 feet into muddy ground, resulting in a fractured pelvis and right lung contusion.",1
"An employee was walking from the parking lot into the distribution center when they slipped and fell on ice, resulting in a broken pelvis.",1
"An employee was driving a golf cart around a stationary aircraft. A baggage tug struck the employee and his cart; the employee suffered broken ribs, a broken collarbone, and a lung injury.",1
"An employee was prepping a 40-foot solid wood pole to be set with other team members. While the pole was being set into the ground with a track bucket, the employee started to push the pole into place. The operator boomed up to straighten the pole. The rigging slid off the pole and landed on the outrigger of the track bucket. The pole bounced and struck the employee causing the employee to fall to the ground. The employee sustained a contusion to the head and a chipped tooth.",1
An employee tripped and fell to the floor in a pharmacy. The employee suffered a broken left hip.,1
"An employee slipped on an ice-covered parking lot while leaving his vehicle. He suffered multiple fractures and was hospitalized, requiring surgery.",1
"An employee was exiting their vehicle when they slipped and fell on ice, resulting in a lower back injury.",1
"An employee was at the start of his shift, walking through the shipping yard to his tractor trailer, when the employee slipped on ice, resulting in a fractured right leg and a torn ligament.",1
"An employee was standing near a cook when the cook dropped a spoon into hot oil and the oil splashed onto the employee, resulting in a burn.",1
"An employee was walking to their car in the parking lot when they slipped on ice, resulting in hospitalization.",1
An employee bumped into a box and a milk crate on top of it fell and hit her knee.,1
"An employee slipped on ice in a parking lot, suffering a broken femur.",1
"An employee was walking in the yard on patrol when they slipped and fell on ice, resulting in a fractured pelvis.",1
"A maintenance worker was clearing a jam in a pelletizer. The employee was using a putty knife near the rotating blade when the putty knife was caught and spun, cutting the employee's hand and breaking his finger.",1
Two employees were conducting preventative maintenance on multiple air handling units. One employee was greasing the motor and fan bearings inside the end of a unit when his left pinky finger was caught and pinched between the belt and pulley resulting in a partial amputation of the distal phalanx.,1
"An employee was working on top of a grading platform, replacing a faulty spring on a shaker. As the employee knocked on a bolt to get to the spring, the shaker dislodged and fell. It amputated the tip of the employee's right middle finger.",0
An employee was getting ready to install tar paper on a one-story residential roof when the employee slid off of the roof. The employee was hospitalized for a fractured ankle.,1
"An employee was walking around outside a customer's home in order to quote an exterior project when the employee slipped on ice and fell to the ground, resulting in a broken leg.",1
"An employee tripped and fell, sustaining an ankle fracture.",1
"An employee was checking control voltage in an electrical panel when an electrical short occurred, causing an arc flash which resulted in third-degree burns on the hands and second-degree burns on the face of the employee.",1
An employee fell from a roof to the ground at a residential construction site. The employee suffered injuries to the neck and head.,1
An employee was walking across the floor to begin the end-of-day cleanup when the employee slipped on fireproofing spray on the concrete floor and fell. The employee was hospitalized with three broken ribs and a partially collapsed lung.,1
"An employee was receiving debris on the ground when they were struck on the head with a 2-pound piece of stucco, resulting in an injury that required hospitalization.",1
An employee was operating a tufting machine when their left arm was caught between the yard feed rollers and fractured.,1
"An employee was getting up from a chair. The employee's foot got stuck and they fell to the floor, suffering elbow and hip fractures.",1
"An employee slipped and fell on outdoor stairs, resulting in a fractured left ankle.",1
"Two employees were manually tapping holes after destructive removal of studs. They were using a pneumatic ratchet, placed on the socket over the tap, with a stop bar in one of the existing studs. When the injured employee activated the pneumatic wrench, it pulled the employee toward a neighboring stud. The employee's left ring finger was pinched between the tool body and the stud, causing an amputation at the fingertip.",1
"An employee was walking in the parking lot to start his shift when he slipped and fell on ice, resulting in a head injury.",1
An employee was walking around his work truck on muddy terrain when he slipped and fell in the mud. His left hip struck a 6-inch tree stump and was broken.,1
An employee was inspecting trailers when they slipped on ice and fell fracturing a hip.,1
An employee was hospitalized with a fractured hip or pelvis after slipping and falling on ice.,1
"An employee was cleaning out a wood burner. A falling clump of wood ash struck his right hand in the airlock, causing the amputation of the ring fingertip against the airlock fin and the chute's frame.",0
"An employee was removing aluminum stuck in a cable stripping machine that had just been turned off. A still spinning blade in the machine pulled in the aluminum and the employee's right index finger. The fingertip was amputated, with the loss of the nail bed.",0
"An employee was performing prep work when they slipped and fell, resulting in a broken hip and a laceration that required stitches.",1
"An employee was on a 3-4 ft. platform ladder adjusting a vacuum hose in a resin super sack. The platform ladder fell over and the employee fell to the concrete floor, sustaining injuries to the back and leg.",1
"An employee was about to unload the garbage from a garbage compactor. When he released the lever on the door, it swung open and struck him in the face. He suffered a broken nose and a facial laceration.",1
"An employee was walking across the floor of a warehouse when they fell and struck their head on a piece of equipment, resulting in a concussion and loss of consciousness.",1
"On February 22, 2021, an employee was using an emery board to polish or de-burr bar stock when their right pinky finger was caught in the lathe and the fingertip was amputated.",0
"An employee was working on a furnace line in a wire mill department, running material line on a spool. A piece of material caught his left index finger as he tried to cut it, amputating the fingertip.",0
"The employee was on the first floor of a building that was under renovation. She fell into a floor hole and was trapped between joists. She suffered broken ribs and back vertebrae, as well as a punctured lung.",1
"Two employees were using a dolly to transport a safe. When the dolly moved over the door's transition strip, the dolly and safe bounced, crushing and causing a fracture on the employee's right hand.",1
"An employee had turned to grab a pen from his work desk when he tripped over a trashcan and fell to the floor, resulting in a fractured left arm.",1
"An employee was walking alongside a rail car. The railcar rolled out of control, striking and rolling over the employee. The employee suffered an amputation to the right leg between the hip socket and the knee, a partial amputation of the left foot, a broken pelvis, and abdominal injuries.",1
"An employee was walking to his truck when he slipped and fell on ice, resulting in a fractured leg and ankle.",1
"An employee slipped on a wet floor in a building while walking toward the exit. The employee fell, suffering a broken kneecap.",1
"An employee was moving cattle from the holding pen to the kill pen. A cow turned back, charged, and headbutted the employee's left leg, resulting in a tibia fracture.",1
"An employee tripped on plastic shrink wrap and fell to the floor inside a cooler. The employee suffered an injury to the left hip and was hospitalized, requiring surgery.",1
"An employee was walking in the parking lot when the employee slipped and fell on ice. The employee's head impacted the ground, causing the employee to lose consciousness.",1
An employee was walking into work when she slipped on a patch of ice in the main plaza and fell. She suffered a broken right tibia and cartilage damage.,1
"An employee was building a shipment using a pneumatic nail gun when the nail hit a knot in the wood and ricocheted, going into his left knee area and resulting in an injury that required surgery and hospitalization.",1
An employee was cutting a metal angle with a band saw. The angle snagged on the blade and smashed the employee's right ring fingertip against the saw's backstop. The fingertip was amputated.,0
"On February 22, 2021, at approximately at 7:50 p.m., a temporary employee was using a custom-made portable grinder to grind cannoli when his right hand was caught in the grinder’s point of operation. His right index finger was severely injured resulting in surgical amputation. His right middle finger was crushed from the second joint to the tip and his right thumb nailbed was separated.",0
"An employee slipped on ice and fell while leaving a store. The employee's back and head struck the ground, causing a back injury and a possible concussion. The employee was hospitalized.",1
"An employee stepped down from the second step of a ladder to the floor, landed forcefully, and suffered fractures to the left tibia and left radius.",1
"A forklift backed into an employee, pinning him against a steel beam. He suffered massive internal injuries and was hospitalized.",1
"An employee was performing diagnostic testing on an automobile elevated on a car hoist. The employee was working from a portable staircase and fell 6 to 8 feet to the ground, resulting in a loss of consciousness, a broken finger, a head injury that required stitches, and a concussion.",1
"An employee was stepping from a metal grating onto a sloped metal ramp, 2 inches high by 6 inches wide. He slipped on residual graphite dust and fell backwards. The back of his head struck the metal grating and he suffered lacerations and a brain bleed. He was hospitalized.",1
"An employee was repositioning a ball valve when the valve closed on the employee's finger, resulting in an amputation to the tip of the employee's right ring finger.",0
"On February 22, 2021, an employee was walking in her work station when she bumped into some boxes. She fell, suffering a broken hip.",1
"An employee was using a come-along when it came off its anchor point, causing the employee to slip and fall onto his left side and break his pelvis.",1
"An employee was moving a mini-compactor to another work area. The employee was caught between a skid steer and the mini-compactor, resulting in a compound fracture of the lower right leg that required hospitalization.",1
"An employee got out of a vehicle and was run over by its rear driver's side wheels. The employee suffered a spinal injury, bruised lungs, and a shoulder fracture.",1
An employee slipped on a snow-covered ice patch in a back lot between steel storage racks. He fell and injured his left ankle.,1
A temporary employee was retrieving an item from a machine. His left index finger was caught by a chain and sprocket and was amputated between the first and second knuckles.,0
"An employee was assisting with moving steel columns and other materials around the jobsite. A steel column being moved by a forklift swung and struck the employee in his right lower leg, resulting in a broken fibula and tibia.",1
"An employee was operating a dock stocker. As the dock stocker made a left turn, it struck a stack of empty pallets and a corrugated gaylord. The employee's left foot was caught under the gaylord and was degloved. The employee was hospitalized, and two of her toes were medically amputated.",1
An employee slipped in snow and fell to the ground while walking to a vehicle. The employee suffered a broken femur and was hospitalized.,1
"An employee was walking by a railcar commodity offloading area. A 2-inch rubber hose funneling phenol into a 55-gallon drum became dislodged from the drum and sprayed liquid phenol onto the employee. He was hospitalized, having suffered second-degree chemical burns to the back of his neck and first-degree chemical burns to his face and arms.",1
"A temporary employee was walking toward the exit of a production floor at the end of their shift. As the employee approached the exit, a co-worker walking in front of them stepped to the right, knocking the employee to the ground. The employee suffered a fractured right pelvis.",1
"A forklift operator had just finished loading a trailer and was trying to return a dock leveler machine to its neutral position. The flap remained extended; as he tried to close it with his right hand, the dock plate lowered and pinched his right middle finger in the flap pinch point. The fingertip was amputated.",0
"An employee was ascending a ladder on a wooden pole. The pole snapped from the base, causing the employee to fall 3 ft., resulting in a fractured hip and wrist.",1
An employee was operating a yard tractor in a parking lot when the yard tractor collided with another yard tractor. The employee sustained fractured ribs and a punctured lung.,1
"An employee fell down stairs, resulting in a fractured left ankle.",1
"An employee was calibrating equipment in a hotel parking lot. The equipment had radiation and laser equipment that deployed from the back of a truck and rotated down. The employee was crushed between the hood and the bumper of the truck, suffering chest injuries. The employee was hospitalized.",1
"An employee was walking while inspecting recently casted concrete segments when they came into contact with abrasive water during a high-pressure washing operation, resulting in lacerations on their right palm.",1
"An employee was operating a forklift when the forklift struck a dock wall, resulting in a fractured forearm.",1
"An employee exited their truck to clear ice off the windshield. The employee slipped and fell on ice, resulting in hospitalization for a fractured right femur.",1
An employee suffered a lower back strain while moving a hospital patient in bed.,1
An employee was emptying a salt spreader attached to a truck. The employee became entangled in the auger and suffered an amputation to the right arm.,0
"Two employees were changing the cups in a pump. The pump was started up to put the machine in reverse, which would get the cylinder cup out to the end of the material cylinder so the cup could be removed. The swing tube switched, and an employee's right thumb and index finger were caught in it. The employee suffered amputations to the thumb and finger.",0
An employee was cutting pieces of trim with a 12-inch miter saw. The sawblade lacerated his left index and middle fingers.,1
"An employee was closing a rolling trailer door. The employee's right hand slipped under the door, which closed on the hand, causing fractures.",1
"An employee was removing bolts from a crane to disconnect the crane from a wind tower. When the crane was being lifted up, the employee's left hand caught on a bolt and was pulled into the bolt, resulting in an amputated thumb and ring finger.",0
"An employee was stepping off a ladder after removing a branch from a light when they missed a step and fell to the ground, resulting in a broken back and right leg.",1
"On February 23, 2021, an employee was making a key in a plant's operations department. The key machine lacerated his right thumb. He was hospitalized.",1
"An employee was working on a chimney from scaffolding. The employee fell from the scaffolding, striking a steel support beam and the ground. The employee suffered broken ribs and a punctured lung.",1
"On February 23, 2021, an employee who was making deliveries got out of his vehicle, tripped, and fell to the ground, resulting in a fractured right arm that required hospitalization.",1
An employee was using a band saw on a product when they suffered a fingertip amputation.,0
An employee fell through a grating on a mezzanine. The employee landed on the concrete surface below and suffered a broken right femur.,1
An employee was stepping onto an 18-inch-high step on the back of a mixing truck. He lost his balance and began to fall. He extended his arms to catch himself and suffered a fracture to the upper left wrist that required surgery.,1
"An employee had been pruning a tree using an arborist rope saddle and climbing equipment. While descending to the ground, the knot securing his rope to the harness became untied. The employee fell 15 feet onto a landscaped area of the property. The employee was hospitalized with possible broken ribs and shoulder and lower back injuries.",1
"An employee was skiing down from a station at the top of a ski run. He lost his balance and fell onto his right hip, suffering a broken right femur.",1
An employee was stocking shelves when they fell from a stock cart to the floor. The employee was hospitalized with a broken hip.,1
"An employee was applying salt to an icy sidewalk when they slipped and fell, resulting in a fractured right leg and ankle.",1
An employee was removing a piece of scrap from a punch press's shuttle system. The shuttle moved and amputated the pad of the employee's thumb.,0
An employee slipped and fell on black ice in a parking lot. The employee suffered a fracture to the left ankle (as well as minor scrapes to the left hand) and was hospitalized.,1
"An employee was walking to their vehicle in the parking lot after their shift. While scraping ice from their windshield, the employee slipped and fell on ice, resulting in a fractured right hip.",1
"An employee was running 1/2-inch square bar solder into a chucker machine. As the employee was clearing a jam in the machine, it activated and caught the employee's left middle finger. The employee suffered an amputation at the tip/nail.",0
"An employee was installing ductwork in an attic. The catwalk came unsecured and the employee fell through the rafters, catching himself before hitting the ground but suffering a ruptured spleen.",1
"An employee was walking in the parking lot when they slipped and fell on ice, resulting in a broken ankle that required hospitalization.",1
"A test pilot was testing a jet ski in the water when he came into contact with a wave, resulting in a closed fracture on his leg.",1
"On February 23, 2021, an employee was attempting to clean/remove cardboard from a block saw when the saw's rotating blade lacerated his forehead. The employee was hospitalized.",1
An employee was coming off a snow covered rooftop onto a ship stair/ladder to go into a building when they slipped and fell approximately 18 feet from the ship stair/ladder to the ground. The fall resulted in a broken leg requiring surgery.,1
"An employee was hauling air bags with a forklift when the forklift collided with a support column, resulting in injuries to the employee's hands and feet.",1
"On February 23, 2021, an employee was removing 4-inch by 4-inch posts from the tops of stacks of veneer before they were loaded into an industrial veneer dryer. While the employee was between stacks of pine veneer on the dryer's infeed chains, the employee was caught between two of the racks and suffered pelvis fractures. She was hospitalized.",1
"On February 23, 2021, a People Ready temporary employee was operating a machine. His coat was caught in the machine and wrapped up in the shaft of the machine conveyor. He suffered serious internal injuries and broken bones and was hospitalized.",1
An employee was cutting a piece of meat on a band saw and amputated the tip of his right thumb.,1
"On February 23, 2021, an employee was placing an asphalt keg into a kettle. The keg slipped and hot asphalt splashed out of the kettle and onto the employee's face. The employee suffered facial burns and was hospitalized, requiring surgery to remove the asphalt.",1
An employee was opening a bag of guacamole using a knife. The knife slipped and amputated the tip of the employee's left index finger.,0
"An employee was using a 5-foot ladder to access a work area. A piece of a component the employee was holding came loose, causing the employee to lose his balance and fall backwards to the ground 55 inches below. The employee suffered broken ribs and a laceration to the lower left leg, about 6 inches above the ankle.",1
"An employee was setting up a palletizer when their right hand became caught in moving parts of the machinery. The employee suffered a laceration that required surgery, which resulted in a partial amputation.",1
"An employee was observing the metal fabrication process. The employee was struck in the head by a small metal projectile created from the fabrication process, resulting in a laceration to the forehead and a possible concussion.",1
"An employee was removing formwork from a ceiling. An aluminum beam he was pulling down struck his hard hat, causing a neck injury that required surgery.",1
An employee was pulling cable while standing in front of a directional drilling machine when the machine struck an electrical pole riser. The electrical pole riser clamp had a power cord that contacted the drilling machine. The employee was shocked and sustained burns to the right hand.,1
"An employee was tightening a 1/2-inch belt on a pulley. The employees finger got caught between the belt and pulley, causing a fingertip amputation.",0
An employee had been standing on a level platform mounted on the forks of a lift truck. The employee was moving off the platform through the truck's operator cage when the mast activated. The employee's right knee was pinched and crushed. The employee was hospitalized and underwent surgery.,1
"On February 23, 2020, an employee was moving a 570-pound tire onto a pickup truck's lift gate when the tire fell off the lift gate and knocked the employee to the ground. The employee suffered an injury to his right lower muscle and was hospitalized.",1
"An employee was closing the cover to an oil vat and was sprayed with hot oil, resulting in second degree burns to the face and left arm.",1
A mail carrier was delivering mail when they fell on the sidewalk due to uneven pavement. The employee was hospitalized with a broken ankle.,1
Pre-conditioned air had just been hooked up from a jetway to an airplane. The air coupling broke away from the flange and struck an employee four times. The employee suffered a broken right tibia and fibula.,1
"An employee was guiding a tree with both hands while it was strapped to the boom of a front end loader. The employee slipped and lost his balance, and one of the loader's front tires ran over his right leg and ankle.",1
"An employee was on a ladder at a construction site when the ladder ""walked"" into a hole, causing the employee to fall to the ground. The employee sustained a skull fracture.",1
"An employee was changing a motor on a sorting line and correcting tension on the conveyor belt. The belt slipped and, as he was adjusting it, his right thumb was caught by the belt and pulley. The belt wrapped around his thumb, causing the amputation of the thumb tip.",1
An employee was placing a mobile home on a trailer when the mobile home slipped off the jack and struck the employee. The employee suffered broken ribs and a punctured lung.,1
"An employee was clearing a paper jam. The employee's thumb was pulled into the machine rollers and crushed, undergoing a partial amputation.",0
"A forklift operator was instructing another employee where to secure a load of pipe. A pipe in the load shifted, pinching the operator's thumb between the pipe and cab mounting bracket on the forklift. The employee sustained a partial amputation of the right thumb above the top knuckle.",0
An employee was replacing an electrical breaker for a garage door at a residential site. The employee suffered a 120-volt shock to the right hand.,1
"While connecting a chain to a rubber pit mat, an employee was struck by a UTV as it was backing up. The employee sustained a laceration to their ankle.",1
"An associate was troubleshooting a faulty electrical component on a golf cart equipped with a flatbed when the cart energized and started to move backward. The associate grabbed the front of the cart; the cart's directional switch was then flipped, causing the cart to move forward and push him against a stationary forklift. The associate was hospitalized with a fractured right hip.",1
"A group home resident suddenly jumped back, causing himself and an employee to fall down stairs. He landed on top of the employee and broke her femur.",1
"On February 24, 2021, an employee had just unhooked a tow strap. The employee was laying on the ground, attempting to re-insert a pin into the front of a haul truck. The truck was at an intersection that had a flagger signaling the public traffic. The flagger motioned to the public traffic and the haul truck moved forward and struck the employee that was working under the truck. The employee was hospitalized with a fractured pelvis, a detached femur, and internal injuries.",1
An employee was transferring hot oil from a tanker truck to a tank storage unit when back pressure in the hose caused oil to spill over onto the employee's forearms. The employee sustained second degree burns to both forearms.,1
"The injured employee was rigging boring machine tracks. A chain was used to lift and reposition the tracks. While the tracks were suspended, the boring machine operator went to boom up and the injured employee's left thumb was caught between the tracks and the rigging chain, resulting in a partial left thumb amputation.",0
"An employee was stepping off a gangway and tripped on a piece of rope that is attached to the safety net. This caused him to fall to the dock and then he rolled underneath the passenger side of a pickup truck that was parked about 3 to 4 feet from the gangway. When the pickup truck pulled away, it ran over the employee's left leg and fractured it.",1
"An employee was moving a pack of pressurized air cylinders with a forklift. The employee noticed the forks were too close together and dismounted the forklift. As the employee was walking around to the front of the pack, he tripped on a curb and pulled the pack of air cylinders onto his foot.",1
"On February 24, 2021, an employee was hospitalized with a right ankle fracture after slipping and falling on ice in a parking lot while walking into work.",1
"A crew was removing steel beams from the work area using a fork lift. There were 10-foot and 30-foot sections of steel beams stacked on dunnage next to each other. After allowing employees to clear approximately 25 feet away from the lift, the forklift operator began to lift a 10-foot section of steel beam. The bottom left flange of the 10-foot beam being lifted caught the top flange of the adjacent 30-foot beam, causing it to fall off the dunnage and onto an employee's foot. The employee's left foot and toes were crushed by the steel beam, resulting in hospitalization.",1
An employee had been bagging food and was assaulted by a co-workers' father. The employee was hospitalized with multiple jaw fractures.,1
"An employee slipped and fell on black ice in a parking lot. Her ankle was broken in three places and she was hospitalized, requiring surgery.",1
"An employee was walking from their car into the building when the employee slipped and fell on black ice in the parking lot, resulting in a contusion on the back of the head and back pain.",1
"An employee was using a wheel grinder when the grinder became unplugged. The employee plugged it back in and when he returned to pick it up, the grinder lacerated his wrist and forearm.",1
"An employee was removing material from a container when the material shifted, causing his right pinky fingertip to be caught between the material and the wall of the container. The employee sustained a partial amputation to the right pinky fingertip.",1
"An employee was on a 32 ft. scaffold. He stepped on a walk board and the walk board slipped, causing him to fall approximately 28 feet to the ground. He was hospitalized with a hairline fracture to vertebrae.",1
"An employee was on the second rung of an A-frame stepladder when the ladder collapsed. The employee fell to the ground, landing chest-first on the top of the ladder and suffering broken ribs and a possible collapsed lung.",1
"An employee was inside a building on a 6-foot stepladder, using a chain come-along to draw the building together at the top so a bolt could be installed to hold it together. The chain released, swung back, and struck the employee's head, knocking him off the ladder. He suffered a skull fracture.",1
"An employee was working in the finished crating area, using a nail gun to build a wooden crate in order to ship finished product. The nail gun activated, discharging a nail into his calf that had to be removed surgically.",1
"An employee slipped on ice in a parking lot, fell, and suffered a dislocated right hip.",1
"An employee was lifting and moving a 22-ton mold using a 50-ton overhead crane. The crane moved and the employee was caught between the suspended mold and another, stationary mold behind him. He suffered lacerations to the liver and spleen, a broken rib on the right side, and a collapsed right lung.",1
"An employee was cutting a billet with a horizontal bandsaw. As the employee closed the vise, his finger was pinched between the vise and the billet. He suffered a partial fingertip amputation.",0
"An employee was operating a welding machine when an air-powered clamp block pinched the employee's fingers between the stationary and the moving clamp pieces, resulting in amputation of two fingertips on the left hand.",0
"An employee was walking from his truck to the customer's house when they slipped and fell on gravel, striking and fracturing his left hip on the concrete apron.",1
"An employee was standing in front of a heater, watching a casing being floated into a hole to seal it. A ball valve failed and burst apart, fracturing the employee's cheekbone and lacerating his cheek.",1
"At 10:00 a.m. on February 24, 2021, an employee fell while stepping off a 14-inch-high platform, landing on the concrete floor and suffering a broken hip.",1
An employee fell through an unstable fiberglass skylight and suffered a back injury.,1
An employee was setting up a new press brake when his finger was caught between the press brake and a part. The tip of the employee's finger was amputated.,1
"On February 24, 2021, at approximately 10:30 a.m., an employee was climbing down a fixed ladder attached to a 40-foot long bulk tanker trailer while carrying a steel five-gallon bucket approximately half full of asphalt material. Due to the bucket's weight, the employee dropped the bucket onto the ground while stepping down onto the fourth ladder rung. While releasing the bucket, the employee lost his balance and fell approximately 4.5 feet to the crushed rock grade, resulting in a shattered left femur and hip socket. The employee was hospitalized for surgery.",1
"An employee was driving an aerial lift onto a trailer while at an auction yard when the trailer moved, catapulting him from the aerial lift and onto the trailer. The employee suffered a broken right femur, a broken hip, and head trauma.",1
An employee fell from the leading edge of a 15-foot-high roof to the ground. The employee suffered broken ribs.,1
"On February 24, 2021, an employee was helping install a 250-pound metal pallet on a precast concrete form. The pallet became bound on the inner core of the form while an overhead crane was lowering it into place. The employee began moving dunnage below while the crane held the pallet about 12 inches above the ground. The pallet fell onto the employee's right ring and middle fingers, catching them against the dunnage and causing partial amputations to both fingers.",1
"An employee had been grounding copper wire to the ground grid and was helping move cable jack reel stands out of the way. As the employee was tipping a reel stand onto its side, the adjustable roller head slid down and pinched the employee's right middle finger against the top of the stand. The fingertip was medically amputated about 1/4 inch from the end.",0
An employee was spreading de-icing agent on a driveway when they slipped and fell on ice. The employee was hospitalized with an injury to the right knee.,1
An employee was exiting a restroom when the door caught her left middle finger. The fingertip was amputated.,1
"An employee was pulling a scrap cart out of a machine. The employee fell backwards to the floor, suffering a broken ankle.",1
An employee was moving residents from beds to wheel chairs and changing bedding. The employee had a heart attack.,1
"An employee was loosening a bolt with a wrench. The wrench slipped off the bolt and a piece of metal lacerated the employee's wrist. The employee was hospitalized, requiring surgery to repair an artery.",1
"An employee was removing a truck-mounted hoist from a service vehicle in order to install it on another vehicle. The hoist fell and landed on his thumb, amputating the tip.",1
"On February 25, 2021, an employee was using a shear to cut metal coils when the tape which holds the metal coils in place came off. This caused a coil to spring up, hitting the employee in the right eye. The employee was hospitalized with a cut to his right iris' tissue.",1
"On February 25, 2021, an employee was working on a 5 ft. scaffold applying a drywall finishing compound to the wall. The employee lost his balance and fell off the scaffold, resulting in a laceration and tissue damage to the right upper arm.",1
An employee was performing maintenance on a mixer machine when they suffered the amputation of their left middle fingertip. The machine was not locked out at the time.,0
An employee was operating a forklift when the chain that operated the forks' raising mechanism snapped off the pulley. As the employee adjusted the chain his right hand fingers were caught in the chain resulting in amputation of two fingertips.,0
"An employee was walking out of a surgical site after cleaning it up. The employee tripped on a broken bar on the laundry cart and fell to the floor, suffering a hip injury.",1
The injured employee and a co-worker were carrying a window through the yard to store it in the garage. The injured employee slipped on snow/ice and landed on the right side of his body. He was later hospitalized with a broken rib and a collapsed lung.,1
An employee was sawing wood block strips with a table saw and sustained a severe laceration across the top of the left arm.,1
An employee was using a table saw to cut molding pieces and amputated their right index finger. The guard was raised at the time.,1
An employee was tightening the on/off tool onto the sucker rod at a well site when their fingers were crushed between the rod table hole and the rod. The employee sustained a right ring fingertip amputation and a deep laceration to the right middle finger.,0
"An employee was inside a mechanical room undergoing renovation. He went to open the exterior loading doors to provide light. When he pushed the doors open, his momentum carried him through the opening and he fell approximately 6.5 feet to the asphalt below. The employee sustained a fractured right hip.",1
"A temporary employee was on a pallet jack turning around when the pallet jack hit a large tote, causing the employee to fall off onto the ground and fracture their right ankle.",1
"A moving powered industrial truck struck an employee, breaking the employee's left foot.",1
"An employee was filling a container with sodium hydroxide when the sodium hydroxide splashed out of the container onto the employee, resulting in chemical burns.",1
"An employee was on a ladder, replacing rollers on a conveyor belt. The employee fell from the ladder to the ground 8-10 feet below and suffered a broken femur.",1
An employee was cutting wood with a table saw and suffered a partial thumb amputation.,1
"An employee was assisting with bringing drywall up to the second floor when they fell off a ladder to the concrete floor, resulting in a neck injury.",1
An employee was picking up a paper towel from the floor near a two-phase electrical heater. Loose wiring on the heater and stand shocked the employee's left ring and index fingers.,1
"An employee was placing hinges on a fixture. A blade activated and came down while her right hand was on a hinge, amputating three of her fingers.",0
An employee was performing maintenance on a pneumatic lathe when he sustained an amputation to the ends of three fingers.,0
"An employee was moving a steel coil that was 4.5"" in width and weighed 1,340 lbs. from where it was being stored to the machine using an overhead crane. As the employee was attempting to roll the steel coil out from where it was stored to attach it to the crane, it started to become off balance and tipped over, landing on the employee's legs. The employee was trapped under the steel coil and sustained a broken tibia and fibula that required surgery.",1
"An employee went to crush a bug with her foot when she fell to the ground, sustaining a fracture to the right ankle.",1
"An employee was repairing/unjamming a pneumatic nail gun. The gun activated and drove a nail into the employee's left index finger; she was hospitalized, requiring surgery.",1
An employee was operating a rebar-bending machine when his left index finger was caught between a bending pin and a piece of rebar. The finger was partially amputated.,0
"An employee was pulling a strap to unload a delivery when the strap suddenly gave way and the employee fell to the same level, sustaining a fractured left femur.",1
"An employee was descending stairs, slipped, and fell approximately four feet, sustaining a compound fracture of the left arm.",1
"On February 25, 2021, an employee was unloading product from a delivery truck when he fell about 4.5 feet to the ground below, fracturing his hip.",1
"An employee was installing a railroad bumping post. As he loosened a nut on a bolt so the bolt could be re-seated, the bumping post collapsed and his right leg was pinned between two pieces of it. He suffered fractures to the tibia and fibula.",1
"An employee was emptying cardboard from a baler. As he was opening the baler door, he noticed it was stuck on the top gate. He lifted on the top gate to free the bottom door and the door swung open, smashing his right-hand fingers against the door latch. His right ring fingertip was amputated.",1
"An employee was standing on the back of a truck crane loading material into a dumper using a hand handled remote control. The employee fell from the flatbed of the truck crane onto the ground resulting in multiple fractures to their ribs, vertebrae and head.",1
An employee was plastering an apartment from a baker scaffold. The employee fell about 5.5 feet from the scaffold.,1
"An employee was refilling a kettle used to lay asphalt when hot asphalt spilled on his right arm and forearm, resulting in burns that required hospitalization.",1
"On February 25, 2021, an employee was struck by a reversing forklift. The employee sustained crushing injuries to the left foot and toes and a fracture to the lower left leg.",1
An employee was cutting down a tree near a river's edge when the tree snapped back and struck the employee. The employee sustained a broken left leg and a lower back injury.,1
"An employee was on a ladder changing an air filter when they lost balance and fell to the floor, breaking two ribs.",1
"An employee was testing a cable assembly that had just been molded. Live cables shocked his left hand, and he was hospitalized.",1
"An employee was on a pallet jack, unloading pallets on a semi trailer. The employee's hand was trapped between the pallet jack's steering handle and the trailer door, causing finger fractures.",1
"A team member was pushing an empty pallet by hand, sliding it across the floor in order to stack it at the end of the shelving. The pallet struck a joint in the floor, causing the team member to fall and break their left femur.",1
An employee was cutting a catalytic converter with a torch. A spark from the torch set the employee's clothing on fire. The employee suffered a second-degree burn to the right side of the body.,1
"On February 26, 2021, a co-worker was handing over a costume for repair as an employee was sitting down. The employee missed the chair and struck her elbow on the ground, resulting in a fractured arm that required hospitalization.",1
"On February 26, 2021, an employee was walking from the mill to the maintenance shop when a dislodged log fell from the re-edge deck onto the employee's foot. The employee sustained a crush injury to their left foot, resulting in two fractures.",1
"An employee was retrieving a hose from the opposite end of a moving conveyor when the sleeve of her jacket was caught by the conveyor, pulling the employee's arm in and resulting in an amputation of the right arm below the shoulder.",1
An employee was operating a batch mixer when it caught his left index finger. He suffered a fingertip amputation.,0
"On February 26, 2021, an employee was hospitalized with pelvis and arm fractures after being struck by a vehicle in the company's parking lot.",1
"An employee was offloading cargo at the airport and was struck by a forklift, resulting in a broken tibia/fibula and lacerations to the thigh and foot/ankle.",1
"An employee was vaccinating poultry at a farm. A bird suddenly jumped, causing the employee to be injected with a poultry vaccine.",1
"An employee fell while stepping up on a conveyor crossover, landing with his hands on the conveyor crossover. The employee sustained a broken femur.",1
"An employee slipped and fell on ice in the parking lot, resulting in a fractured lower extremity on his right side.",1
"On February 26, 2021, an employee was trimming branches using a chainsaw. The chainsaw kicked back and its blade lacerated his left little finger. He was hospitalized.",1
An employee was delivering groceries at the loading dock when he tripped over a dock plate and fell onto the concrete loading dock floor. The employee suffered a dislocated shoulder and fractured facial bones.,1
"An employee was unjamming a conveyor belt when his finger was caught in the conveyor's chain drive, resulting in an amputation of the left ring fingertip.",1
"An employee was walking into the workplace and slipped and fell on ice, resulting in a broken hip.",1
An employee was trying to remove jammed packing plastic from a machine. The machine's cutting knives activated and amputated the tip of the employee's left middle finger.,0
"An employee was exiting a vehicle to determine why a tool had gotten stuck in a pipeline. The pipeline ruptured. Flying debris struck the employee's left leg, breaking the femur.",1
"An employee was closing the rear door of a trailer when he slipped and the door came down onto his arm, resulting in a broken wrist/forearm.",1
An employee was pushing meat products down into an extrusion tunnel. The blades in the tunnel crushed and lacerated his index and middle fingers.,1
"An employee had been moving a scrap bin. The employee was struck by a forklift, which ran over the employee's lower leg and broke it.",1
"An employee was operating a stand-up skid steer pulling a grounded tree with an attached rope and pulley. Another employee was assisting by pulling on the attached rope when his right ring and pinky finger slid into the pulley sheave area between the rope and the pulley, resulting in a degloving injury.",1
"An employee was cooking food in a deep fryer. As the employee took the basket out of the fryer, he bumped a pan of hot grease that was sitting on the side of another fryer. Hot grease spilled onto the employee, resulting in second-degree burns on the right forearm and hand.",1
An employee was struck by a stack of corrugated boxes while operating a transfer car. The employee suffered a broken pelvis and was hospitalized.,1
"An employee slipped on a wet floor and fell, injuring his right hip. A hematoma developed on the hip and he was hospitalized.",1
"On February 26, 2021, a spider hoist weighing 500-700 pounds fell from its mount and landed on an employee's head, resulting in a concussion and traumatic brain injury.",1
"On February 27, 2021, an employee was cleaning the conveyor belt system for a tortilla dough-making machine when their hand was caught between the moving belt and the steel roller resulting in fractures to the employee's left arm and hand.",1
"An employee was assisting a customer and tripped over a box and fell onto a stock cart, hitting her head on the corner of the cart. The employee sustained a laceration to the top of the head.",1
"On February 27, 2021, an employee was using a three-step stool to reach a medication in the pharmacy. When coming down, she missed a step and fell backward, resulting in a back L2 compression fracture that required hospitalization.",1
"An employee was cleaning up spilled material on the floor using hot water from a hose. The hot water went into the employee's boot, resulting in 3rd-degree burns to the top of the employee's left foot.",1
"An employee tripped while stepping over a stanchion, fell forward, and suffered a broken left leg. The employee was hospitalized.",1
"An employee fell while walking to a building, landing on the ground and suffering a broken hip. The employee was hospitalized.",1
An employee was caught between a loading dock and the back of a trailer when the trailer backed into him resulting in crushing injuries to his chest.,1
An employee was utilizing a crane to stack steel when the chain hit a piece of wood on the stack next to it. The steel being transported fell off the crane striking the employee and causing crushing injuries to their lower right leg.,1
"An employee was moving steel plates with a forklift. The straps holding the plates came loose, causing the forklift to fall over. The employee suffered a broken hip and a head laceration and was hospitalized.",1
"On February 27, 2021, an employee was walking toward a truck when she tripped and her right arm struck an exterior wall of a building. Her arm was broken and she was hospitalized.",1
"An employee was at a dairy holding pen next to a push gate. The push gate stopped, then started up again as she was investigating why it had stopped. Her fingertip was amputated.",0
"An employee was working from a 5-foot platform when a support pin came out, causing the platform to collapse. The employee fell to the ground and the platform fell onto him. He suffered a broken pelvis.",1
An employee was delivering mail when they slipped and fell on snow. The employee was hospitalized with a broken ankle.,1
"An employee was exiting a room when she fell and landed on her knee, resulting in a fracture that required hospitalization and subsequent surgery.",1
"An employee reached into equipment to remove a piece of chicken debris as part of the sanitation process. When the employee reached into the equipment, the water pressure activated and caused the employee to strike their hand against the machine, resulting in a laceration to their middle and ring fingers that required stitches. The equipment was not locked out/tagged out at the time.",1
"An employee was signaling a crane operator to hoist a form. As the crane lifted the load, the spreader bar chain pinched the employee's left middle finger. The finger was amputated.",1
"On February 27, 2021, an employee was using a plasma cutter to cut open a transformer tank that had been previously drained and vented, resulting in an explosion. The employee suffered bruising and a laceration on their right palm.",1
An employee fell to the ground while moving a pallet. The employee was hospitalized with injuries to their left wrist and hip.,1
An employee was adjusting a blade in a printing unit. Two or three fingers on his right hand were crushed between the printing cylinder and the impression cylinder.,1
"An employee was oiling a chain and used a towel to remove excess oil when the towel was caught by the machine, resulting in a partial amputation of the right index finger.",0
"An employee slipped on a floor and fell, suffering a broken hip.",1
"An employee was operating a snow mobile on a groomed trail when they struck a tree, resulting in a fractured nose and femur.",1
"An employee was performing an inspection of a mechanical power press when he bent down to pick up a dropped tool. While standing up, the employee's hand came into contact with the machine's core rod, which moved and crushed his left index finger. The employee sustained an injury that required surgery and a subsequent partial amputation.",0
"An employee missed a step while climbing down from a tanker truck and fell to the ground, suffering a broken right elbow.",1
"An employee was unloading a truck when he slipped inside the trailer and fell, resulting in head and spine injuries.",1
An employee was performing cleaning operations in a pyrotechnic loading machine. A flash burned her right hand and the inside of her forearm.,1
"An employee was standing on the tailgate of a truck when he fell backward and hit his head on concrete, resulting in a concussion.",1
An employee was unloading a truck. The employee slipped while inside the trailer and suffered a broken wrist.,1
"An employee was standing in a 47-inch-deep ditch when dirt fell, pinning the employee's lower leg against a pipe. The employee's lower left leg was broken.",1
"An employee was hooking up a second bar joist to some rigging when the top bar-joist came loose and struck the employee, resulting in a lower right leg fracture, a cranial laceration, fractured ribs, and a C-2 fracture.",1
An employee was pushing empty totes to a storage area. The employee fell to the floor and suffered a broken right hip.,1
"An employee was waiting for a boom operator to finish setting a cube of 90 concrete blocks measuring 8x8x16 inches onto another cube. The cube bumped into another cube that was already on the ground, causing some of the blocks to fall off the cube and strike the employee's right hand, resulting in broken index and middle fingers.",1
"On March 1, 2021, an employee slipped and fell on a patch of ice in the parking lot while on their way to the maintenance shop. The employee suffered two fractures in their left leg: below the knee and above the ankle.",1
"A postal carrier was delivering mail when she tripped and fell on the sidewalk, landing on her hand. The employee suffered shattered bones in her hand, which required hospitalization and surgery.",1
"An employee was retrieving die cuts from between two pallets when their foot became caught on one of the pallets, causing the employee to lose their balance and fall to a concrete floor. The employee suffered a fractured right hip.",1
"An employee was working from a step ladder, trying to place a piece of scrap into a basket on a rack system. There was not sufficient clearance to put the pipe in, so the employee pulled the basket out. The basket fell against the ladder and tipped it; the employee fell about 6 feet to the floor below, and the basket landed on his foot. He suffered a broken foot, leg, and hip.",1
An employee was using a compressed air blower to clean up accumulated dust and was exposed to airborne contaminants at the facility. The employee experienced shortness of breath and was hospitalized.,1
"On March 1, 2021, an employee was feeding parts into a milling machine when his right hand and fingers were pulled into the machine, resulting in injuries that required surgery.",1
An employee slipped and fell onto a roof deck and suffered a possible hernia.,1
"An employee was adjusting one of the beams in a forklift when their left thumb became caught between the two support beams, resulting in bone fractures and a skin laceration.",1
"On March 1, 2021, a roofer was climbing up an extension ladder to access a roof. He fell, landing on the ground 10 feet below. He suffered a head laceration and was hospitalized.",1
"On March 1, 2021, an employee was retrieving a plastic spacer used to separate rows of boxes on a pallet. A floor jack bumped into a nearby stack of pallets, and a pallet struck the employee. The employee suffered fractures to the lower leg and ankle and was hospitalized, requiring surgery.",1
"An employee was removing the bucket from a tractor when a pin became loose and the bucket rolled onto the employee's ankle, resulting in a fracture.",1
"An employee was operating a lip weld robot. When the robot began to cycle, a shim fell off the lug. As he was retrieving the shim, the robot cycled and pinched his left index finger between the lip plate and the lug. He suffered an amputation to the finger.",0
"An employee was providing care to a resident who was having a seizure while sitting in a wheel chair. The employee tripped over the wheel chair or the resident's legs and fell, striking the wall with her shoulder and face, and then landing on the floor. The employee was bleeding from the nose and was hospitalized with a fractured right humerus.",1
An employee was operating a chop saw and amputated his left index and middle fingers to the first knuckles.,1
"An employee tripped and fell while walking on the sidewalk, striking the left side of his face on the sidewalk. The employee suffered a laceration above his left eye that resulted in hospitalization.",1
"An employee was working in a shallow trench preparing to install fiberoptic cable. When he stood up, he hit his head on the bucket of a trackhoe and had a seizure.",1
"An employee was changing grinder blades. The employee had to turn the blades on a belt to remove them. The belt got caught, and a blade cut the employee's left hand between the little finger and ring finger. The employee was hospitalized.",1
"An employee and a coworker were manually transferring a die set (593 pounds) from a maintenance table to an industrial cart. The cart consists of a stationary platform and a lift platform controlled by a chain and hydraulic cylinder operable by foot pump. After the two employees pulled the die set onto the raised lift platform from the table, the chain over the hydraulic cylinder came free from the threaded rod and nut that serve as an anchor point on the stationary platform, causing the lift platform with die set to fall from table height to the ground. The die set struck the injured employee's leg as it fell, resulting in lacerations and fractures to the shin and ankle.",1
"An employee was climbing a 6-foot ladder from a 3-foot crawlspace up into the living room level. The ladder moved as he stepped off, causing him to fall to the floor. The employee suffered a dislocated and torn hip socket.",1
An employee was on a clam boat trying to tie a rope to a disabled oyster boat. A wave hit the clam boat and the employee lost his balance and fell. His right hand and thumb were caught and lacerated between the two boats.,1
"On 3/01/2021, an employee was cutting a piece of wood using a table saw when a kickback occurred, resulting in a partial amputation of the left thumb.",1
"An employee was trying to get wheel parts to feed down into a bucket below a storage rack. The bin needed to be reoriented so the parts door would open; a powered industrial truck was brought over to pull out the container and turn it 45 degrees. When the container moved, a finger on the employee's right hand was caught between the bin and the steel rack. The fingertip was medically amputated.",0
"An employee was operating an assembly machine when they tripped over a floor fan and fell to the concrete floor, resulting in a fractured right hip.",1
"A driver was helping unload product at a customer location. As the customer used a forklift to unload the product, an iron pipe started slipping. The employee was using a tightening rod to push the bar when his left thumb was caught between the pipe and the rod. The thumb was crushed and broken.",1
"An employee fell while walking down stairs, hitting a landing and suffering a broken left hip.",1
"While performing a clean-in-place procedure, an employee removed the nozzle of a hose to place the hose on piping when a valve opened and sprayed her with 185-degree hot, caustic water. The employee suffered burns to both arms, both legs, and her abdomen.",1
"Employees were installing some caps and a torque tube (a long cylindrical metal frame 6 inches in diameter). The tube fell, catching an employee's left little fingertip against a post. The fingertip was amputated.",0
"On March 2, 2021, an employee was washing down around a filter press operation near a horizontal conveyor belt. He slipped on sludge around the filter press. As he tried to catch himself from falling, his right hand landed in an opening on the moving conveyor belt. He suffered a contusion, abrasions, and cuts to his right arm and was hospitalized.",1
An employee was attempting to calm a patient when the patient pushed the employee. The employee fell and struck their head on a door jamb. The employee was hospitalized.,1
An employee was taking product out of the freezer when she lost her balance and fell to the ground. The employee was hospitalized with a broken femur.,1
An employee was cutting steaks on the bandsaw when the blade partially amputated a finger.,0
"An employee was using a flip dolly to rotate a rack of glass. The employee used their right hand to operate the flip dolly's wire control box when the dolly rotated downward and pinched their right thumb, resulting in a partial amputation.",0
"An employee was walking between work stations when they tripped over a spring actuated pallet carousel (pallet riser) and fell to the floor, resulting in hospitalization due to a broken and dislocated left shoulder and a possible clavicle fracture.",1
An employee was on a step ladder adjusting a security camera and fell to the ground. The employee sustained a head injury.,1
"An employee was using a table saw when they contacted the saw blade, resulting in a severe laceration.",1
"An employee was assisting in the rotation of a boat hull mold when his left ring finger was caught between the mold and the frame used to hold the mold, resulting in a partial amputation.",0
"An employee was adjusting the forks on a forklift when the carriage assembly slid off and landed on top of his left foot, resulting in an injury.",1
"An employee and a coworker were lifting a stone so that it could be hooked to and lifted by a forklift. The coworker used hand-operated suction cups to lift the stone while the employee used their hands. A suction cup came loose and the stone dropped and smashed the employee's left hand, resulting in the amputation of his left index fingertip.",0
"An employee fell from an A-frame ladder to the ground, suffering leg and hip fractures.",1
"An employee was unjamming the inline grinder when his shirt sleeve got caught in the machine.  The chain rubbed against his arm, causing a deep laceration to the right forearm.",1
"An employee was attempting to connect carts to a tugger when their right ring finger became caught between the handle of one cart and the rack of another cart, resulting in a fingertip amputation.",0
"An employee was using a rag to apply grease to a gear sprocket and chain on a barrel tumbler. The rag and his glove were pulled into the sprocket and chain, resulting in two finger amputations. The machine was running at the time of the incident.",0
"An employee was working on a forklift fuel system when the fuel ignited. The employee suffered second degree burns to the ear, cheek, and lips.",1
An employee was bending metal in a 50-ton press brake. His finger was caught in a pinch point resulting in amputation of two fingertips and the loss of two fingernails.,1
An employee was cleaning a squeeze roller when their finger got caught between the rollers. The employee suffered a degloving injury that resulting in an amputation.,0
"An employee was attaching a 90-degree elbow to the back of a vacuum truck when they were caught between the 90-degree elbow and a roll-off box, resulting in abdominal injuries.",1
"An employee had attached a crane sling to an 8-inch pipe, and the crane was holding the pipe with minimal tension while bolts were removed from its lower flange. The pipe came loose and knocked the employee off the trailer to the ground 6 feet below. The back of the employee's head struck the trailer after the fall, causing a head injury.",1
"An employee was walking along a platform when a drill bit, being used nearby, broke and sent a steel shard into the employee's left eye. The employee suffered a cut retina.",1
"A technician was prying a reach assembly on a reach truck with a pry bar, trying to extend the reach assembly. The pry bar slipped and the reach assembly closed back on the employee's right hand breaking it.",1
"An employee was working from a 6 ft. stepladder removing wiring from a suspended ceiling. The employee fell from the third rung of the ladder, approximately 3 feet, to the tile floor, resulting in 3 broken ribs and a hip fracture.",1
"An employee was utilizing a railroad jack handle when the jack handle swung up and hit his face, resulting in a skull fracture and a broken nose.",1
"On March 3, 2021, an employee was pulling a wooden flatbed cart. The cart caught the employee's right foot and lacerated the Achilles tendon.",1
"Two employees were shoveling gravel in a trench when a shovel slipped from the gravel and contacted an employee's left pinky finger, resulting in amputation.",1
"An employee was making repairs to a 480-volt generator. A cable came in contact with a lug on the load side of the transfer switch, causing an arc flash that burned the employee's hands, left arm, and neck.",1
"An employee was doing roofing work on the edge of a one-story residence. The employee fell 9 feet, hit a tree branch, and then landed on the grass. The employee was hospitalized for neck and face fractures.",1
An employee was walking to her car after her shift and was knocked down by a gust of wind. The employee was hospitalized with a fractured leg.,1
A partly filled bucked of hot asphalt was dropped on an employee's arm. The employee suffered burns to the left arm and left ear.,1
"An employee was feeding veneer into the dryer when the veneer became jammed. The employee's right arm was caught in the chain and sprocket while unjamming the veneer, resulting in amputation of the employee's right arm up to the elbow.",0
An employee was performing routine maintenance on a cold roll steel line when their right ring finger was caught by the machine's guard mechanism resulting in a partial amputation of the fingertip.,1
"On March 3, 2021, an employee was feeding linen inside an ironer equipped with eight heating rollers, including belts. The employee was feeding the machine when a piece of linen got spooled around the machine, catching the employee's arm within the feed belts. The employee's arm curled around the belt, putting pressure onto the arm as the employee attempted to tug his arm out. The employee was hospitalized and required surgery.",1
An employee was collecting mail in the plant using a tow tractor when they lost control and fell from the vehicle. The employee's left ankle and foot were caught between the tractor and a guardrail in the facility resulting in a fractured ankle.,1
"An employee was lifting a hydraulic cylinder off the shelf, tripped on nylon webbing, and fell to the ground while holding the hydraulic cylinder. The cylinder smashed his left hand and partially amputated his left thumb.",0
"On March 3, 2021, an employee was feeding rubber into an extruding machine when their right hand was pulled into the machine, resulting in a crushing injury to the right index finger. The employee was hospitalized.",1
"An employee was attending to a client in a facility. A tenant at the facility struck the employee on the head, face, and body, causing contusions and bruising to the head and the body.",1
An employee was walking around the site when they stepped into a divot in the ground and broke their leg.,1
An employee was helping push a landing joint onto a catwalk trough at the v-door on a rig floor. The employee's right middle and ring fingers were caught between the locking ring and landing joint. The employee suffered a fracture to the middle fingertip and an amputation to the ring fingertip at the nail.,0
An employee was splashed by hot asphalt while unloading a truck. The employee suffered burns to the back and both arms.,1
"While flagging traffic, an employee was struck by a falling utility pole. The employee suffered a broken ankle.",1
"An employee was cleaning a compression machine when their left index finger was caught in a pinch point, resulting in a partial amputation.",1
"An employee was working on an extension ladder when the ladder slid out from under him, causing him to fall approximately 8 feet to the floor. The employee sustained fractures to the right leg.",1
"An employee fell off a garbage truck to the ground, breaking his left wrist. He was hospitalized.",1
"An employee was straightening a hand line (rope used to move material) with an attached pulley that was stretched between the bucket truck and the skid steer. The rope snapped under pressure, striking the employee and causing a fracture to the left hand and lacerations on the right hand.",1
"An employee was working inside a paint line washer. The employee was walking on a walkway when he slipped and his left leg fell into a wash tank containing 160-degree water. He suffered a third-degree burn from the knee down and was hospitalized, requiring skin graft surgery.",1
"On March 3, 2021, an employee was re-spooling a wire on a spooler. While the reel was on its side, the wire got tangled. His right thumb was caught and lacerated in the tangled wire. He was hospitalized.",1
"An employee had been setting up braces for piers on a three-foot foundation. His foot slipped off the edge of the pier, causing him to lose balance. He fell backward to the ground, landing on his back and his head struck a hard clump of dirt. The employee was hospitalized with seizures.",1
"On March 3, 2021, an employee tripped over dialysis cords and fell to the floor, resulting in head, face, and left knee injuries.",1
"An employee was using denatured alcohol to remove glue from a vehicle. The employee lit a small amount of the alcohol on fire, which ignited the vapor from the alcohol bottle and caused the bottle to explode. The employee sustained second and third degree burns on his upper left torso.",1
"An employee was removing a track bolt on a crane using a pry bar and a wrench. As he loosened the wrench, the pry bar slipped, causing the chain to fall and pinch the employee's left thumb between the chain and the bolt. The employee sustained an amputation to the left thumb tip.",0
"On March 4, 2021, employees were carrying a roof truss when one of them tripped over lumber and fell to the ground. He suffered a broken hip and was hospitalized.",1
"An employee was emptying a rail car. The car's door closed on his left hand, amputating the ring finger at the second knuckle.",0
"Employees were standing two walls and were connecting them when one of the walls came loose and landed on an employee, resulting in a bruised leg and hip.",1
"An employee slipped on a wet, recently mopped floor and fell, suffering a broken femur and wrist.",1
"An employee was on an A-frame ladder fixing an electrical wire on an HVAC unit in a ceiling. The employee was holding onto the unit with their left hand when the employee was shocked with 480V of electricity. The employee let go of the unit and fell 6 feet from the ladder. In the midst of falling, the employee hit their head on a metal work station. The employee was hospitalized for two skull fractures, burns to three fingers on their left hand and one finger on their right hand, and unspecified right arm pain.",1
"A truck driver fell from his truck and sustained fractured ribs, thumb, back, and face, along with a brain bleed.",1
"An employee was repairing a clamp whose pin had become compromised and attempting to clean a sensor. The clamp closed into the material, pinching the employee's right index finger and causing an amputation to the fingertip.",0
"A recycling-sorting employee was removing debris from a conveyor belt and fell at least 4 feet from the conveyor belt to the ground, resulting in a leg injury.",1
"An employee was moving steel beams with an overhead crane. The beams shifted and pinned the employee's legs, breaking both of them.",1
"An employee was putting a chain on the roll-down curtain door when the door's socket caught the employee's fingers, resulting in an amputation of the right index and middle fingers.",1
An employee was using a dolly converter while unhooking a set of double trailers when he was struck in the chest by the dolly converter. The employee sustained fractures to the sternum and ribs.,1
"An employee was training a new employee on a thermoforming machine. As the employee was disposing of a roll of plastic scrap, the tail end of the roll struck the employee in the left eye, resulting in a ruptured globe and a traumatic cataract to the left eye.",1
An employee was trying to push a trailer hitch onto a trailer ball when his left middle finger was crushed between the hitch and the ball.,1
"Two employees were working on a threaded rod. The first employee was checking one end while the second was turning the other end with a rachet when the bolt broke, causing the pulley to move and crush the first employee's left index finger resulting in a fingertip amputation.",1
An employee was operating a lathe when his glove was caught and pulled into the machine. The employee sustained a fractured arm.,1
An employee was wiping the tension roller on a 6-inch slitter with a rag. The rag and the employee's right hand were pulled into the roller; the employee's fingers were crushed and degloved.,1
An employee was unclogging an auger and sustained the amputation of his left index fingertip.,0
A table saw lacerated four fingertips on an employee's right hand. The employee was hospitalized.,1
An employee fell off an off-road vehicle and was hospitalized.,1
"An employee was on an 8-foot ladder, removing fuel tank panels using an air impact screw buster. He lost his balance and fell to the concrete floor, suffering a fracture to the ribcage, a forearm laceration, and a back injury.",1
An employee was counting received product when they suffered an allergic reaction that required hospitalization.,1
An employee fell over the bolt that held down a barrier. The employee suffered a broken wrist.,1
"An employee rested his hand on the inside of a garbage truck hopper as he operated the packer panel. His hand was caught between the packer panel and the truck, resulting in a fractured left hand.",1
An employee had been on the ground trimming tree branches with a pole chainsaw. The employee was found lying on the ground unconscious and was hospitalized for a concussion.,1
Two employees were lowering a car on an automotive lift by manually engaging an unguarded latch. The latch snapped back and pinched one of the employee's left hand against the lift post resulting in a partial amputation of the index and middle fingertips.,0
"An employee was using a nonpowered pallet jack and pinned his right leg between the pallet and the racking, resulting in a fracture to the right tibia.",1
"An employee was moving a small container to a staging area with a forklift. The employee lowered the container to the ground, but one of the forklift's forks jammed in the wheels of the container. The employee exited the lift and got the container to release. The pressure on the forks released and the left blade fell, landing onto the employee's big toe less than 2 feet below and cutting it. The employee was hospitalized. The toenail was removed.",1
An employee was taking lab waste to a special waste dumpster. The employee fell through grating adjacent to the special waste dumpster approximately 4 feet to the concrete floor and sustained broken bones in both feet.,1
An employee broke his leg while attempting to jump onto a truck.,1
"At about 4:30 p.m. on March 5, 2021, a U.S. Postal Service employee was stepping out of her postal vehicle in a residential driveway. She lost her footing and fell to the driveway, with her feet moving in opposite directions away from her center of gravity, and broke her right ankle and tibia. She was hospitalized and underwent surgery.",1
"An employee was climbing up a ladder and fell from the fourth step to the ground, resulting in hospitalization for a sore back.",1
"An employee was moving logistic bars in a trailer. A forklift moved and struck his leg, breaking it.",1
"An employee was doing maintenance work on a pump. The employee was sprayed in the face with pressurized hydraulic fluid, which lacerated the employee's right eye. The employee was hospitalized and underwent debridement of the eye.",1
"On March 5, 2021, an employee was engaged in the task of adding backstops to the highest shelf of a storage racking system in the pre-blend department. The employee used an extension ladder to access the highest shelf. The employee attempted to step from the ladder onto the shelf when the bottom of the ladder slid out due to a slippery floor. The employee fell  approximately 20 feet to the concrete floor and suffered fractured vertebrae. The employee was hospitalized.",1
An employee was bailing cardboard and started feeling ill. The employee was hospitalized for a heart attack.,1
"While loading a box truck, an employee stepped backward and fell 3-4 feet from the truck to the ground. The employee sustained broken ribs.",1
A longshoring employee was removing strapping from a bundle of lumber at pierside. The employee's leg was entangled in the rigging sling a forklift had used to move the bundle of lumber. The employee suffered leg and ankle injuries and was hospitalized.,1
"An employee was taking a step up onto a lettuce bagging machine platform when their right foot slipped, causing the left foot to contact the floor. The employee suffered a foot/ankle fracture and was hospitalized.",1
An employee was struck by a forklift while walking on an airport ramp. Both of the employee's legs were amputated.,1
"An employee was opening a door on a roll-off container using the chain. The chain broke and the employee slipped and fell to the ground below, suffering a broken leg.",1
"An employee was working on top of a powered scaffold, adjusting the rigging for a transformer coil assembly. He fell between the unit and the scaffold platform to the floor 11 feet, 10 inches below. He was hospitalized.",1
"An employee was walking down the palletizer platform stairs, slipped on the last stair, and fell. The employee sustained a broken left arm.",1
"An employee was tightening a bolt holding a pulley. The bolt snapped, releasing the pulley and the cable. The cable snapped and caught the employee's fingers against a guard, causing the amputation of the left index finger at the last joint and a laceration and fracture of the left middle finger.",1
An employee was walking through the shop and was pinned between a car and a van on the lift. The employee sustained a broken ankle and fractures on both sides of the pelvis.,1
"An employee was servicing and cleaning a section of a conveyor belt. As he was closing the conveyor section, it landed on his left hand and amputating the tip of the little finger.",0
"An employee was MIG welding a repair on a bracket. Her shirt caught fire, causing second-degree burns to her stomach, chest, and neck.",1
"An employee was using a posthole digger to clear dirt away from a propane vaporizer when the line disconnected, sending liquid propane into the air. The employee sustained propane burns to the nasal cavity, face, and head.",1
"An employee was arranging chicken product in a walk-in meat cooler. He slipped and fell to the floor, suffering a broken left fibula. He was hospitalized.",1
"An employee was cutting welds loose on a steel assembly. The assembly broke loose and struck the employee, resulting in a fractured sternum, fractured collarbone, two fractured ribs, a bruised lung, and a fractured toe.",1
"An employee was on a catwalk, cleaning the shower on a paper machine. As he was using a wrench to rotate the shower shaft with his right hand, the indicator came around and caught the tip of his left index finger, causing a partial amputation to the finger pad.",0
"An employee reached to grab rubber in a conveyor belt and their arm was caught in the belt, resulting in a fractured forearm and a right index finger injury.",1
"An employee was standing next to staged formwork, about 3-4 feet high. The formwork shifted and fell on the employee's lower left leg, fracturing the ankle.",1
"An employee was hanging up a mop in a kitchen. The kitchen door opened as another employee walked through, and the employee's left little finger was caught between the door and the door jamb. The finger was broken and the fingertip was amputated.",0
"At about 12:45 p.m. on March 6, 2021, a U.S. Postal Service mail carrier was delivering mail when a dog jumped a fence and bit his left hand.",1
"An employee was operating a motorized walk-behind wire wheel brush inside a road work barricade. A car from live traffic entered the area and hit the employee, breaking the employee's leg. The employee was hospitalized for surgery.",1
"An employee was vacuuming the floor and tripped over the hose and fell to the floor, possibly breaking her hip.",1
"SPN Well Services employees were inspecting gas production unit chokes for sand washing. They had inspected three units and were bleeding off pressure on a fourth when a flash fire engulfed it in flames. One of the employees suffered first-, second-, and third-degree burns.",1
An employee was cleaning a grill with a towel. The towel caught fire and burned his hand. He was hospitalized.,1
"An employee was getting out of his truck when the truck door closed on his finger, resulting in a laceration.",1
"An employee was cutting meat with a knife when the knife slipped, resulting in a stab wound to the employee's abdomen that included a severed artery. The employee was hospitalized.",1
"An employee was riding on the end platform of a tank railcar. As the railcar came to a stop, the employee fell off the platform to the ground. The railcar wheels ran over his forearm as he fell. The forearm was medically amputated.",1
An employee was screwing in drywall while standing on approximately the middle rung of a 6-foot A-frame ladder. The employee leaned out to the left to reach his work when the ladder tipped over sideways. He grabbed a metal stud with his left hand in an attempt to stop his fall and his foot got caught in the ladder during the fall. He sustained lacerations from the metal stud and a fractured hip caused by contact with the ground. The employee was hospitalized.,1
"An employee was installing metal curb on a roof and fell through a roof opening, resulting in multiple broken bones.",1
An employee was conducting work on second story balcony when they leaned on a guard rail and it fell off. The employee fell approximately 12 feet to the concrete below and sustained broken ribs.,1
"An employee was performing vigorous activities at work. He became dizzy and began vomiting. He was hospitalized, suffering from low electrolyte levels.",1
"An employee was operating a valve seater machine on an aerosol production line when the machine malfunctioned. While unjamming the machine, the employee's hand was caught on a belt which pulled her fingers into the machine and amputated her index finger below the first knuckle.",0
"On March 8, 2021, an employee was reinstalling a belt in a machine. The machine was activated, and the employee's right hand was caught in a pulley. The machine struck and injured four of the employee's fingers.",1
"A mail carrier tripped over a curb and fell on pavement, resulting in a fractured right hip.",1
"An employee was walking in a warehouse under a low beam. The employee's head grazed the beam, causing the employee to lose balance and fall to the floor. The employee sustained an injury to their right knee.",1
"An employee was operating a shipping shuttle system. The shuttle malfunctioned, and she tried to unjam it; when it broke free, her ankle was pinched and broken between the shuttle and a rack support.",1
"An employee tripped on merchandise on the floor and fell, injuring her right shoulder.",1
An employee had arrived at a client's home to provide home health aid. The employee fell after leaving their car and suffered an injury that required stitches.,1
"An employee was taking a transfer unit off a telephone pole when the pole's base snapped, causing the employee to slide down the pole and fall to the ground. The employee suffered a broken femur that required surgery.",1
"An employee was operating an order picker in the receiving area. She stopped and dismounted in order to retrieve an appliance when the order picker moved backward, pinning her against a beam connecting two aisles of racking. The employee sustained a rib injury.",1
"An employee was near the edge of a road. Two vehicles collided and one of the vehicles hit the employee, causing a laceration to the left elbow and a fracture to the right fibula.",1
"An employee was on the fifth step of an A-frame ladder, installing J-hooks. He fell and suffered a head injury. He was hospitalized.",1
"An employee was connecting two steel beams when his right ring finger was caught between the beams, resulting in surgical amputation of the fingertip.",0
An employee was cleaning an animal enclosure when the Komodo dragon bit the employee on the leg.,1
A carpenter was ripping 1-by-4 material to the required size with a table saw. The sawblade severed his right index finger just below the second knuckle. The finger was medically amputated.,0
"An employee was stressing post-tension cables using a hydraulic ram. As the ram was retracting, the employee's hand slipped and the ram pinched the tip of their left ring finger, resulting in an amputation.",0
"An employee was working in a clean-in-place room. A circuit was removed that was running a three-step wash on a ketchup deck bulk line, causing hot water and caustic chemicals to escape out of the line and spray the employee. The employee was burned.",1
An employee was helping a patient get out of bed when the patient fell on top of him. The employee sustained a back injury.,1
An employee was using a chop saw in the flooring department and amputated their left index and middle fingers.,0
"An employee was cleaning a blend tank when the pump to the machinery caught his right index finger, amputating the tip.",1
"An employee was operating a bulldozer on a road when it slid on ice, then rolled a full 360° down an embankment and came to rest with its tracks wedged in rocks. The employee was found outside of the vehicle with a gash on his head and was hospitalized.",1
"A butcher slipped and fell in the meat cutting room, resulting in a skull fracture.",1
"An employee was coming around the corner of an aisle carrying multiple packages. The scanner on his finger struck the end of the aisle, and while he was catching the packages he lost his balance and fell. He landed on his left side and suffered a broken hip. He was hospitalized.",1
An employee was working on a heat sealer machine. The machine's sealing mechanism caught his left index finger and partially amputated the upper portion.,0
"An employee fell while walking through a parking lot, suffering a broken hip.",1
"An employee was clearing a cotton jam in a card machine. The machine started and caught the employee's hand, causing severe damage up to his wrist. The hand was amputated.",0
"An employee reached into the passenger window of a customer's car in order to collect money for gasoline. The customer drove off, dragging the employee approximately 20 ft. before the employee was able to free themself from the vehicle.",1
"An employee was installing drainage culverts in a trench bank. The trench bank caved in on the employee, who suffered injuries to the lungs, spleen, and liver. The employee was hospitalized.",1
"An employee was working on a machine, removing a material wrap from the nip roller when the employee's left hand was caught in the nip roller, resulting in fractured fingers.",1
"On March 8, 2021, an employee was adjusting the alignment of a hot dog line machine. When he moved a loader so the hot dogs could drop into a square cup, the loader pinched his right ring finger. He suffered an amputation to the finger without bone loss.",0
"An employee was rigging a precast concrete panel to a crane when their left index finger became caught between the wire rope sling and the crane hook, resulting in an amputation.",0
"An employee was performing maintenance on a pump when his finger was caught in the rotating pump, resulting in amputation of the distal phalanx of his right index finger.",0
"On March 8, 2021, an employee was standing on the right rear step of a waste disposal truck when the truck's sweeping blade activated and hit his left leg, breaking it. He was hospitalized.",1
An employee was clearing a jam from a rotary airlock when the airlock caught the employee's fingers. The employee suffered amputations (above the second knuckle) to the right middle and ring fingers.,0
Two employees were moving a pallet when an unassembled entertainment center fell from the pallet and crushed one employee's right thumb. The employee was hospitalized and required surgery.,1
"The hose for a grease gun ruptured, causing an artery obstruction in an employee's hand. The employee was hospitalized.",1
"An employee was emptying a wheeled cart with trash into a dumpster. The cart began to fall into the dumpster, pinching the employee's finger between edge of the cart and the dumpster and resulting in a left middle fingertip amputation.",0
"A patient care technician's feet were tangled in a stool. The technician fell to the floor, suffered a broken hip, and was hospitalized.",1
"At 1:27 p.m. on March 9, 2021, two employees were troubleshooting a welder that would not start. An explosion occurred on the welder that blew out the side of the gas tank. One of the employees suffered burns to the body and was hospitalized.",1
An employee was lifting and delivering packages. The employee felt chest pain and was hospitalized with a collapsed lung.,1
"An employee was riding on a motorized pallet jack. The pallet jack hit him, causing a fracture and a skin tear in his leg. He was hospitalized.",1
"A blade cover was being removed when it fell down onto an employee's left ring finger, amputating the tip.",0
An employee was clearing a package jam when the tip of his little finger was caught between a belt and a transition plate. The finger was lacerated and the fingertip was amputated.,1
"An employee was strapping a load on a flatbed truck in a parking lot. Another truck ran over his right foot as it left the parking lot. He suffered a crushing injury, a contusion, a broken second toe, and a dislocation of the first toe.",1
"An employee was using a drill when the drill chuck released from the drill, hitting the employee in the face and resulting in a broken jaw.",1
"An employee was connecting an auger to a drill. The employee's right ring finger was caught in the pinch point between the auger and the hook on the service winch for the drill, causing a laceration to the finger and a partial amputation to the fingertip.",1
"An employee was on a ladder repairing a light fixture. The fixture shorted, and he suffered an electrical shock and burns to both hands.",1
"A crew was removing an 8-inch rubber hose from inside a 2-foot diameter metal pipe. The hose was being pulled by a loader. The hose became stuck and began to stretch. The loader operator stopped and an employee went to inspect. The hose broke free and struck the employee's right shin, resulting in a broken right leg.",1
"An employee was performing brick-laying work from a scaffold. As the employee walked on the scaffold, the wood board overturned, causing the employee to fall 20 feet to the ground and sustain contusions to their head, arms and legs.",1
An employee twisted his left ankle while walking.,1
"An employee slipped and fell in a wet, muddy yard, suffering a broken ankle.",1
"A Customs and Border Patrol agent was riding an ATV on a dirt road. He lost control at a corner and jumped from the ATV, hitting a boulder and suffering a shattered lower-back vertebra.",1
"On March 9, 2021, a CNC machine operator suffered a laceration and fracture to the left hand/arm. The employee's little finger was surgically amputated.",0
"An employee was using a plasma cutter on a steel plate that weighed approximately 1140 lbs. A bolt that was holding the steel plate in position broke, causing the steel plate to fall on top of the employee. The employee sustained fractured L5 and S1 vertebrae and a fractured pelvic bone.",1
"An employee was operating a forklift when the front tire hit a drain. This caused the lumber that the forklift was carrying to fall off, tilting the forklift forward enough to lift the back tires off the ground. The back tires then slammed back onto the ground. The employee was hospitalized for a fractured back.",1
"An employee was running into the building and fell onto the vinyl floor, sustaining a fractured right femur. It was raining at the time.",1
"On March 9, 2021, an employee was walking to her desk when she tripped and broke her femur. She was hospitalized.",1
"An employee was unspooling aluminum from a coil when the coil kicked back, causing a partial amputation of the left middle finger.",0
"Two employees were inspecting a house from an onsite scaffold when a scaffold board broke, causing the employees to fall approximately 7 feet to the ground. One employee suffered a sprained ankle while the second employee fractured their right ankle, requiring surgery and hospitalization.",1
"An employee was walking in the shop when he slipped on a plastic corner protector and fell to the floor, resulting in an injury that required hospitalization.",1
"An employee was removing a tree when he fell 30 feet to the ground. He suffered a broken arm, leg, and pelvis.",1
An employee was attempting to unclog a machine when the machine cycled and a rotating metal wheel inside the machine cut her right index finger that resulted in an amputation.,0
"On March 10, 2021, an employee was using a 12-foot A-frame ladder to pull insulation panels off a shelf when he lost his balance and fell 6 to 7 feet to the concrete floor, resulting in a fracture to his left ankle that required hospitalization.",1
An employee was operating a saw machine when the metal blade amputated their right thumb.,1
"An employee was working on a roller that belongs to a conveyor when his hand got caught between the conveyor belt and a roller, resulting in a fracture in his lower left arm. The machine was running at the time.",1
"An employee tripped over a box while putting away groceries. Her head struck the floor and she lost consciousness, having suffered a possible head/neck injury.",1
"A customer got into a physical altercation with a store manager, hitting them with a hand basket and stabbing them in both arms using a knife. A customer who tried to help the store manager was also stabbed.",1
"An employee was pushing boxes through a tape machine when he suffered a back injury and fell, unable to feel his legs.",1
A maintenance employee was troubleshooting a conveyor belt system when his glove was caught in the machine pulling his left arm into the moving belt and resulting in a fractured arm and lacerations. He was hospitalized.,1
"An employee was cleaning an industrial mixer when the mixer activated.  The employee's right hand was crushed by the mixing paddle, resulting in surgical amputation of the right hand.",1
Two employees were operating company vehicles in the yard and collided with each other.,1
"An employee was closing a door when his knee gave out and he fell to the concrete floor, suffering a broken right hip.",1
An employee was operating a forklift and struck a pallet jack resulting in a fractured left leg and hospitalization.,1
An employee was moving materials on a dumbwaiter. The dumbwaiter shifted downward and the employee was caught between the dumbwaiter and the floor resulting in broken ribs and soft tissue injuries that required hospitalization.,1
An employee was lifting boxes and strained their back.,1
An employee was putting a conveyor belt back on a sprocket. The conveyor was activated and amputated the tip of the employee's right index finger (without bone loss).,0
"Employees were welding an elevator leg at a mill when the cover of the leg came off, struck an employee, and broke their arm.",1
"An employee was spot welding an area under a boat. The welding equipment ignited vapors in a compartment that surrounded the gasoline fuel tanks and a vapor explosion occurred. The employee suffered a fractured skull, chest wall, ribs, and shoulder.  The employee required hospitalization.",1
"An employee was operating a forklift in a trailer to move product when the forklift wheel caught on the dock plate and became stuck. When the forklift cleared the edge of the plate the employee's leg was pinned between the forklift and the trailer wall, resulting in a broken leg above the ankle.",1
An employee's arm was caught in the rollers of an adhesive laminator. The employee suffered head and chest contusions.,1
"An employee was running a jointer with gloves on when their right middle finger contacted the  interior portion of the jointer, causing a laceration on the finger that included tissue and bone. The employee was hospitalized and suffered a subsequent amputation between the top and middle joints of their finger.",0
"An employee was preparing to move a steer into the auction pen when a second steer knocked the employee to the ground. The employee sustained fractured neck vertebrae, lacerations to the head, and shoulder contusions.",1
"A temporary employee was preparing to change a filter in a filter housing. When a filter housing was opened, 190-degree water burned his right arm and the right side of his torso.",1
"An employee was operating a wood stacking machine when his glove was caught in the chain and sprocket underneath the guard, resulting in a partial amputation of the right thumb.",0
"An employee was working on a carousel when his left pinky finger became caught in a chain and sprocket, resulting in amputation.",0
An employee was adjusting an overhead door spring. He struck part of the door spring or bracket and suffered a wrist laceration that required hospitalization for surgery.,1
An employee had been observing the trolley line. His hand came in contact with a pinch point on the trolley where the carcass changes direction to proceed into the deep chill cooler. The employee sustained a partial amputation of his left ring finger.,0
"An employee was operating an assembly machine and had to adjust a part in the machine. While adjusting the part with his left hand, the machine cycled resulting in a partial amputation to the middle fingertip, without bone loss.",0
An employee's hand was caught in a machine. The employee suffered a fingertip amputation.,1
"An employee was walking along the side of a ditch in order to take measurements of piping elevation when he tripped and fell into the ditch on his left side, resulting in a fractured left radius.",1
"At about 12:00 p.m. on March 10, 2021, an employee tripped while stepping off the curb outside her office. She fell to the ground, suffering a broken leg. She was hospitalized.",1
"An employee was adjusting the guiderails inside a case packer when his left ring finger got caught between the groove and the railing, resulting in a laceration that required hospitalization.",1
"An employee was using a manlift to pull products from a shelf. He fell from the manlift to the cement floor about 9 feet below, suffering fractures to the pelvis and shoulder.",1
"An employee was removing an excavator's grapple arm pin with a hammer and a steel bar. The bar struck the employee's jaw, knocking the employee unconscious and causing an injury that required surgery.",1
"An employee was standing next to a closed roll up door. When the door opened, the manual pull-down rope caught the employee's feet, and the employee fell to the ground sustaining broken ribs and a punctured lung.",1
"An employee was picking trash and metal off a conveyor belt when their right arm became trapped in the conveyor belt roller drum, resulting in amputation below the shoulder.",0
"An employee was walking through rooms after connecting lights to make sure the lights were working when he fell on broken tiles that were on the floor, resulting in a broken left hand.",1
"An employee was removing a battery from a lift truck. While pushing the battery out of the truck, the top of the battery injured three fingers on her right hand.",1
An employee was bending over to pick up a dropped item when a broom handle punctured his right eye.,1
"An employee was replacing a non-functioning fuel sender on a boat. After installing the new part, he was using a small torch to seal the heat shrink connectors when fumes ignited, causing an explosion. The employee suffered burns on the left side of his face, as well as shoulder and rib pain.",1
"A school bus driver fell while stepping out of his bus in a parking lot. He landed on the ground, suffering lacerations to his left thumb and right middle finger; a left leg injury that left the leg unable to support weight; and abrasions to the forehead, right eye, and nose.",1
"An employee was installing wire from a utility pole to a house. He became nauseated and began climbing down, but as he was descending he got dizzy and fell, landing on the ground 14 feet below and suffering a broken heel.",1
"An employee was cleaning a tenderizing machine. The employee's hand was caught in the rotating chain and sprocket, causing an amputation to the middle finger past the second knuckle.",1
"An employee had just exchanged the propane tank on his forklift. After he began driving the forklift, he noticed a propane fuel smell. He stopped the forklift, stepped off, and proceeded to tighten the coupler with his hands, resulting in second degree burns that required hospitalization.",1
"An employee was removing pizza from a conveyor line when their gloved finger became caught between the conveyor belt and a belt roller resulting in a fractured finger, a fingertip amputation, and a nail avulsion.",0
"An employee was in a ski lift loading area. She was holding two bags. One of the bag handles broke, and as she reached down to grab the bag, her left knee twisted and the lift chair hit her buttock. She suffered a fracture to the upper part of the left tibia, at the knee.",1
An employee's head struck a machine. The employee suffered a head contusion and fracture.,1
"An employee was removing stock off pallets in the stockroom and putting it on carts. After completing the process, the employee was standing upright when he collapsed backward, striking his head on the floor. The employee suffered a ruptured aorta.",1
"An employee was climbing up a fixed ladder to a roof access to look at AC units that would need to be labeled when he lost his grip and fell 15 feet down the ladder, resulting in fractures that required hospitalization.",1
"An employee was using a water hose to fill the water tank in the back of his truck. When he finished filling his truck, he handed the hose to another employee and started walking toward the back door of the office. He tripped over the hose and fell to the ground, breaking his left leg in three places.",1
"An employee was descending from stairs when they slipped and fell, resulting in a head lesion.",1
"An employee was tracing lines in an area to prepare for upcoming work. He tripped over a curb and fell, suffering a broken arm.",1
"An employee was scanning parts on a pull cart near a forklift when they were struck by the forklift as it was backing up, resulting in broken bones in their foot and ankle.",1
An employee was using a ladder to get inside a manhole to measure a pipe that was being replaced. The employee fell from the ladder to the ground and suffered a compression fracture in their back. The employee was hospitalized.,1
"Two employees were tightening down bolts on a press punch block. As the last bolt was being tightened down, the wrench slipped and part of the press block fell on the hand of the employee holding up the press block. The employee's left ring finger was pinched between the ratchet tool and a punch that was hanging down, causing an amputation of the fingertip.",0
An employee was stepping off a curb while walking to their vehicle and fell. Their femur broke and caused their tibia to be pushed out through their ankle.,1
A furnace technician was severely burned when a steam boiler exploded at a customer's home.,1
"An employee experienced trouble breathing while on their mail delivery route, resulting in hospitalization.",1
"On March 11, 2021, a temporary employee was on a route picking up garbage. While he was cycling the hopper, a metal pole sprung out and struck him in the face, resulting in facial fractures that required hospitalization.",1
"An employee was adjusting a collar on a shaft. The shaft moved, and his right ring finger was pinched. He suffered an amputation to the fingertip, above the first small knuckle.",1
"An employee was performing setup on a straight cut machine when her left middle finger was pinched in a clamp mechanism, causing an amputation to the finger.",0
"At 12:30 p.m. on March 11, 2021, an employee fell off a burning table while removing scrap from it. He landed on his arm on the concrete floor, suffering a fracture to the elbow/arm that required hospitalization and surgery.",1
"On March 11, 2021, an employee poured cake mix into a baking pan and then stepped onto a ladder when he slipped and fell to the ground, resulting in a bruised head and tailbone that required hospitalization.",1
An employee twisted his ankle while stepping down a level. He suffered a broken left knee and was hospitalized.,1
An employee was greasing the fifth wheel of a truck between the drive tires on the passenger side when the truck went into gear and rolled over the employee's left leg.,1
"An automated railroad car door closed on an employee's thumb, smashing it against the door locking mechanism and resulting in a fractured thumb.",1
"At about 3:30 p.m. on March 12, 2021, employees were loading hot water condensate from a utilities unit into a vacuum truck. When the truck was nearly full, the water supply was shut off. As an employee was disconnecting the hoses for the water, he was sprayed with residual pressurized water from a 6-inch coupling he was disconnecting at the truck. He suffered second-degree burns to both forearms and the left side of the face and neck.",1
"An employee was riding on the bumper of a work van. He fell off and his head struck the pavement, causing a head/brain injury. He was hospitalized and underwent surgery.",1
"An employee was repairing a belt on a conveyor. He turned and struck his head on an overhead beam and then fell back into the conveyor he was working on, sustaining a back injury.",1
"An employee was attempting to release a bag that had become stuck between two conveyors when the tip of their finger became caught in the belt, resulting in a fingertip amputation.",0
"An employee was coming down a step ladder. The employee missed the last step and fell to the floor, suffering a broken left hip.",1
"An employee was switching valves on a pump in the recovery boiler area. While en route to the equipment, the employee entered an area where excavation work was being performed and that was flooded with 6 inches of cloudy water. The employee stepped into an inspection port that was waist high and sustained burns to the lower body from a hot water mixture.",1
"On March 12, 2020, an employee was driving a pickup truck along a closed highway lane. The truck hit the side of a skid steer's track, and the employee suffered neck whiplash. He was hospitalized.",1
"An employee hooked up a high vac to perform routine housekeeping tasks. The employee was walking to turn the high vac on when they fell to the ground and contacted the furnace deck, resulting in a fractured left femur that required hospitalization.",1
"An employee was working in a basement, keeping the area secure while other employees drilled down from the floor above. The concrete core drilled out from the floor above fell down, struck the rim of the core-catching bucket, then fell about 15 feet further, striking the employee's hardhat and then the back of his head and neck. He suffered a laceration to the back of the head and a ruptured cervical disk.",1
"Two employees were installing pipe supports when the top support slid and struck them both. One of the employees was hospitalized for lacerations and injuries to the ribs, face, and back of the head.",1
"An employee was removing a rock that had stuck on a dump truck gate. The gate shut on his fingers, causing amputations to three fingers on his right hand.",0
"An employee was moving the air pole on the side of a drill press when their gloves got caught in the drill press, resulting in an amputation of the right middle finger.",1
"An employee tripped over a chair in a break room, falling and breaking her hip. She was hospitalized.",1
"An employee was leaving the facility for the day. As the employee was about to exit the building, he stopped at a table that stores hand sanitizer and face masks. At the same time, the work platform adjacent to the table was struck by a transfer car that was being repositioned. When the transfer car struck the tower, it dislodged a service part (2"" steel blind flange) from one of the platform levels, which then fell and struck the employee on the head. The employee sustained a laceration, contusion, and fracture to the head.",1
"Two employees collided while one of them was climbing down a ladder carrying a nail gun. The gun discharged, firing a wire nail fastener into the other employee's head. That employee was hospitalized.",1
"An employee was transferring a bag of fertilizer that was held up by a forklift into a front-end loader. As the employee was standing in-between the forklift and the front-end loader, one of the machines rolled forward and the employee was pinned between the forklift mast and the bucket of the front-end loader. The employee was admitted to the hospital with six broken ribs.",1
An employee fell to the floor in a deep freezer. The employee suffered a compression fracture to a lower-back vertebra.,1
"An employee was attempting to move a steel form panel with a crane when the spreader beam became tangled with a rebar cage. As the load began lifting, the tension from the chains making contact with the rebar cage allowed the load to swing toward the employee, trapping him between the steel form and a solid staircasing and resulting in an injury to his left leg.",1
"An employee was troubleshooting a large industrial grinder because it was stuck. The grinder's blades became free, striking the employee's right hand and lacerating four fingers. The ring finger was amputated.",0
"An employee was disconnecting a trailer from a truck by pulling on the fifth wheel handle. His hand slipped off the handle and he fell backward to the ground, suffering a broken right femur.",1
"An employee was cleaning the floor with a bucket of water that contained oven cleaner instead of floor cleaner. Some of the water spilled onto the employee's feet, resulting in chemical burns.",1
"An employee was climbing into a skid steer when he slipped and fell, suffering a broken hip.",1
An employee fell to the asphalt in a parking lot while trying to stop two thieves from stealing her vehicle. She suffered a back injury.,1
"An employee developed severe right thigh pain after stepping off a stand-on snow removal machine. He was hospitalized, having suffered a possible tendon injury on the thigh.",1
"An employee fell from a roof access ladder to the ground, suffering facial trauma and a broken foot.",1
"An employee was acting as the front spotter for a forklift on the salesfloor when the wheel of the forklift ran over his left foot, resulting in a fracture that required hospitalization.",1
"An employee was moving product between pallets. The employee's leg got caught in shrink wrap, and the employee fell to the floor and suffered a broken leg.",1
"An employee was stepping off a scissor lift onto a steel structure while tied off to a plumb line when they slipped and fell, resulting in a fractured left hip and elbow.",1
"At about 12:55 p.m. on March 13, 2021, an employee suffered a broken hip while stepping off a stand-up lift.",1
An employee was turning an electric pallet jack when his foot was caught between the pallet jack and a pole resulting in an ankle fracture and laceration.,1
"On March 14, 2021, an employee was pouring hot water from a container into a salad bar ice reservoir to melt the ice and prepare the salad bar station for cleaning. The water spilled down the employee's front, causing third-degree burns to his abdomen and the front of his legs. He was hospitalized.",1
An employee was lifting a metal coil with an overhead crane. He noticed the chain sling was twisted and was trying to straighten it when his left index finger was pinched between the chain sling and the coil. The finger was broken.,1
"An employee was dumping a mini dumpster, mounted on a forklift, into a large trash container. When the mini dumpster tipped, the employee's finger was caught between it and the forklift's forks. The employee's fingertip was amputated.",0
An employee fell while jumping over a snow bank in a parking lot. The employee suffered a dislocated knee and a broken tibia.,1
"An employee was walking to a dumpster. A forklift struck the employee as it backed up in an intersection. The employee suffered a head laceration, a left leg wound, and a crushed left little toe.",1
"On March 15, 2021, an employee was using a manual pallet jack to unload a trailer. As he was maneuvering the load toward the end of the trailer, it began to fall. The employee fell to the asphalt ground, suffering a broken left elbow and hip.",1
"On March 15, 2021, an employee was helping demolish a concrete floor when a 650-pound, 3-foot by 3-foot concrete slab slipped off a forklift and landed on his right foot. The foot was broken and he was hospitalized, requiring surgery.",1
"A temporary employee was controlling a come-a-long on one side of a flat plate while another worker was using a 20-pound steel hammer to strike the plate and move it into position inside the engine room of a vessel which was on shore/dry dock. The temporary employee was manually shaking the plate to see if it would slide down under its own weight when his left hand was struck by the hammer. The injured employee was wearing protective leather gloves at the time. His middle finger was broken and lacerated, the ring finger was also lacerated.",1
An employee had just shut off a meat grinder and was reaching to clear its blade. The grinder blade amputated 1/4 to 3/8 inch from the employee's left middle finger.,0
"An employee was using a hydraulic torque wrench to loosen the nuts that held a pump's fluid end to the stay rod bolts. His right little finger was caught between the wrench and a nut that the wrench was braced against. His finger was crushed, and he was hospitalized.",1
"An employee was driving a tractor when it went out of control. The employee jumped from the tractor, landed on a rock, and suffered rib fractures.",1
A press brake operator was bending small sheet metal parts when his left ring finger and middle finger were caught between the part being bent and the face of the upper bending die. The tips of each finger were crushed and the employee was hospitalized for surgical amputation of both fingertips.,1
"An employee tripped and fell while working behind a jewelry counter, suffering a broken elbow.",1
An employee was adjusting a machine when it cycled and its parts caused the amputation of the employee's middle fingertip.,1
"An employee was walking toward a clean room exit when she tripped on the edge of a floor tile and fell to her knees, suffering a broken hip.",1
"An employee tripped and fell in a hallway, sustaining injury to the right hip and elbow.",1
"An employee was connecting beams to columns during steel construction. While walking from one point to another, he lost his balance and fell to the ground about 13 feet below. He suffered a broken left elbow.",1
An employee was unloading a concrete mop sink from the back of a truck with a dolly. The slope of the ramp caused the sink to slide down the dolly and crush the employee's right thumb. The employee suffered a fracture and dislocation to the thumb.,1
"At about 8:00 a.m. on March 15, 2021, an employee was pushing back a curtain for a Conestoga trailer when a forklift dropped a pallet on the employee. The employee suffered cuts, bruises, and a fractured back vertebra and was hospitalized.",1
"An employee was preparing a cup line packer for sanitizing. The machine started, and a moving rail amputated the employee's right middle fingertip.",0
"On March 15, 2020, an employee was moving steel slip coils when a coil came off a crane. The employee's legs were pinned under the coil and one of his legs was broken. He was hospitalized.",1
"An employee was pushing a hose out of an exterior door on the second floor of a facility. The hose lifted up the hand rail and the employee fell over it, landing on the ground 12 feet below. The employee suffered a broken right ankle.",1
"An employee was standing near the edge of a loading dock, handing HEPA filters to another employee who was inside a dumpster. A 300-pound cart moved toward the employee. As he attempted to evade the cart, he lost balance and fell over the edge and into the dumpster, landing on the bottom about 4 or 5 feet below and suffering a broken sacrum.",1
"At about 10:00 a.m. on March 15, 2021, an employee was loading a trailer with a forklift. As the forklift moved around the trailer, it became stuck in a hole. The employee was trying to free it when it broke loose and slid into trailer. The employee's left hand was smashed between trailer and the forklift's roll cage; the hand and fingers were broken.",1
"An employee was unloading a small bundle of lumber from a truck using a forklift. As he backed away from the truck, the forklift's rear wheel rolled into a curb. The resulting jolt caused the top of the employee's head to strike the forklift's roll-over protective cage. He suffered a laceration to the top of the head.",1
"An employee was using a ladder to access a racking system. He fell, suffering injuries to the head and face.",1
"An employee was preparing to install an alarm system sensor. The employee was burned by a gas fume flash fire, suffering burns to the right side of the face and hand.",1
"An employee was backing up a tow tractor. The tips of the employee's right middle, ring, and little fingers were caught between the tow tractor and a roof support pole, causing partial amputations to those fingers.",1
"An employee was standing on a stepladder, replacing an exhaust fan hood vent gutter. He stepped onto a fryer cover, which moved, bringing him into contact with the fryer oil. He suffered second- and third-degree burns to the right leg, ankle, and foot.",1
"An employee was working at a roll former, feeding a coil of steel through the rollers to form a ring. The steel became misaligned at the second of three forming rollers. The employee was aligning the piece when the roller caught his right glove and drew in his index, middle, and ring fingers. He suffered a fracture to the index finger and crushing injuries to the middle and ring fingertips, with amputations at the fingertips. The machine was guarded at the time.",0
An employee was cutting a sirloin steak with a band saw when the sawblade amputated the tip of a finger on his right hand.,0
An employee was kicked in the stomach by a dog while holding down the dog for a normal procedure. The employee sustained injuries to the abdomen and required surgery.,1
"An employee was on a ladder, changing a bearing on a conveyor system. The employee slipped off the ladder and fell to the floor, suffering a neck fracture and a laceration on the face.",1
"An employee was cutting pig tails on a bandsaw. The saw lacerated the employee's right hand between the index finger and thumb, cutting into the palm. The employee was hospitalized and underwent surgery.",1
"An employee was installing pipe insulation from a ladder. The employee fell to the ground, suffering a head laceration, a dislocated right middle finger, and the loss of a fingernail on the right hand.",1
"An employee was lighting wood debris on fire. The thinner he was using exploded, burning his face and arm.",1
"An employee was operating a logging-type truck with a grapple attached. An outrigger had been set for the truck, and the employee was setting the second outrigger when the first one slipped, causing the truck to pitch sideways. The employee was ejected, struck the ground, and suffered a broken left leg and an injury to the right shoulder.",1
"An employee fell from an extension ladder onto an asphalt pavement about 15 feet below, suffering a skull fracture, internal bleeding in the head, a broken collarbone, broken vertebrae, five to eight broken ribs, and a liver laceration. The employee was hospitalized.",1
"An employee was using a forklift to stack cotton bales for transport. Two of the bales fell and struck the employee, causing head, rib, and pelvis injuries.",1
"An employee was inspecting a roof leak from an extension ladder. He fell off the ladder, landing about 20 feet below and breaking his femur.",1
"An employee was changing a core box containing a mold and foundry sand. When the employee was putting away the core box, it moved unexpectedly and crushed the tip of the employee's right little finger. The fingertip was then amputated.",0
The employee was disconnecting old equipment and installing new equipment when he was exposed to hydrogen fluoride. He suffered chemical burns to the left arm and light burns to his left cheek and eye.,1
"On March 16, 2021, an employee slipped on black ice (concealed by recent snow) while stepping out of a building. The employee fell, suffering a broken left wrist.",1
"An employee was threading a machine when it pulled in the employee's left hand, lacerating the palm.",1
An employee was trying to clear jammed wood from a trim saw when one of the blades cut his hand.,1
Two employees were fighting in a parking lot. One employee's head struck a concrete barrier; he lost consciousness and was hospitalized.,1
An employee was troubleshooting an oil separator and suffered amputation of their right ring finger below the first joint. The machine was not shut down or locked out at the time.,0
"At about 10:40 a.m. on March 16, 2021, an employee was pushing a 24-inch-long, 6-inch-diameter steel pipe with a forklift. The pipe slid off the fork, smashing employee's right index finger against the fork. The employee suffered a laceration to the finger.",1
"An employee was monitoring as a tree was felled. The tree hung up; an excavator pushed on it to clear it, and its top half snapped and sprung backwards toward the crew. Part of this upper section, about 4 inches in diameter, struck the employee in the back of the right leg as he was trying to get away. He suffered an open fracture of the tibia and fibula.",1
An employee slipped and fell in an icy parking lot. The employee sustained fractured ribs and a fractured L1 vertebra.,1
"While pulling a kitchen cart, an employee slipped on a wet floor in front of an ice machine. The employee fell to the floor, suffering a head injury.",1
"An employee was walking along the edge of an excavation while the bucket was being changed on the excavator. The quick coupler slipped while releasing the bucket and the bucket slid down the spoil pile, knocking the employee into the ditch. The employee sustained a fractured bone in their back.",1
An employee was removing brackets from an overhead door while standing two rungs from the top of a 10 ft. ladder. When the employee removed the last bracket the overhead door shifted and the employee fell off the ladder to the ground. The employee sustained fractures to the heels of both feet.,1
"An employee was troubleshooting a vacuum pump connected to a drum containing cream filling. The employee shut off the vacuum pump, disassembled the pump, turned the pump back on, and was trying to remove thick cream around the edge when the pump suction cycled. The employee's left thumb was caught between the base ring and the inside of the pump ferrule housing, and was amputated at the first knuckle from the tip.",0
"An employee was starting up a thermoforming machine. As the employee threaded a plastic sheet through an oven, his fingers were pinched in a nip point created by the oven chain as it indexed. He suffered a partial amputation to the right ring finger and a laceration to the right middle finger.",0
"An employee was trying to hang netting in the back of a chicken house. As the employee was securing the net to the corner of a ventilation fan guard, the guard broke loose, fell, and struck the employee's right hand. The employee suffered lacerations across and between the ring and little fingers.",1
An employee was cleaning a serrated cutting edge in a taping machine through a 3-inch by 3-inch opening. The cutting edge activated and caused an avulsion injury resulting in surgical amputation of their left thumb tip.,0
"Two employees were inspecting separate sides of a void tank in a ship. When one of them stood up from a squat, his glasses slid down his face and his eye and right brow struck a protruding piece of a metal bracket. He suffered a cut to the brow and an eye injury from the bracket piece.",1
"An employee was standing on a trailer lift gate, trying to lock it. The hook broke and the employee fell onto a metal welding bin. The employee suffered three broken ribs and a punctured lung.",1
"An employee was strapping down merchandise in the back of a box truck. The strap did not lock down. When the employee pulled on it to make sure the merchandise was secured, its looseness caused him to fall backwards out of the truck to the ground and suffer a broken arm.",1
An employee was checking to add more dough to a machine when an auger in the machine amputated his right middle finger.,0
"An employee was standing between a forklift and a tilt hoist, trying to reinstall the hoist arm. The fork and boom extension fell and pinned him to the tilt hoist. He suffered a possible skull fracture and a dislodged right ear canal and was hospitalized.",1
An employee lost his balance and fell while exiting a bucket truck's bucket. He landed on the ground below and suffered a broken right ankle.,1
"An employee tripped on a bucket in the back of a delivery truck and fell. The employee's head struck the dock, causing a head laceration and a broken nose.",1
"An employee was aligning a rotor shaft to go into a line board. The employee's finger was pinched between the shaft and the board, leading to a fingertip amputation.",0
"An employee was working in a junction box. An arc flash caused second- and third-degree burns to the employee's face, arm, and lower back.",1
"An employee tripped over a box of hangers while stepping out of a register bay. She fell, injuring her right leg.",1
"Employees were rigging up a work over rig and using a crane to move a blowout preventer off a trailer. The blowout preventer moved and swung once it was lifted from the ground, hitting an employee in the chest. He suffered minor internal bleeding and was hospitalized.",1
"An employee was remotely operating a crane. The employee lost their footing and fell to the concrete floor, suffering a broken hip. The employee was hospitalized.",1
"An employee was stocking shelves when a bungee cord on a freight cart came loose and struck the employee in the head, causing a head injury.",1
An employee was oiling a boom hoist cable on a crane. His left hand was caught between the top of the sheave and under the keeper that was guiding the boom hoist cable. Four fingers on the hand were amputated.,1
"An employee was cleaning a backing roll. The employee's hand was caught in a nip point between rolls, causing a crushing injury to the hand and arm.",1
"An employee was rolling bins in a receiving area. She tripped over a metal tracker on the floor, landed on her right hip and shoulder, and suffered injuries to both including a broken hip.",1
"On March 17, 2021, an employee fell 17 feet from the bucket of a loader while covering a haystack with a tarp, landing on the ground and suffering injuries to their ankles, feet, and ribs.",1
An employee slipped and fell while getting down out of a crane. The employee landed on decking below and suffered a broken hip.,1
An employee fell while moving from a ladder to a roof. The employee landed on the asphalt ground below and broke both heels.,1
"An employee was using a torque gun to loosen a bonnet bolt on a blowout preventer door. The torque gun swung around and struck his left middle finger, causing the amputation of half of the finger.",1
"An employee was unloading tires from a truck at the transfer station. The employee opened a box on the truck to dump the tires and when he opened the door, a tire came loose from an elevated position and struck his left leg. The employee sustained a broken tibia and fibula.",1
"An employee was moving trash with a forklift. As the employee emptied the forklift's trash hopper, his left ring finger was caught in a pinch point and the fingertip was amputated.",0
An employee was feeding product into a heart and liver machine. The machine amputated her right ring fingertip below the nailbed.,0
"An employee was operating a core drill. The machine caught the employee's clothing, then entangled his right thumb. The thumb was amputated.",0
"An employee tripped on a rug in a break room, falling to the floor and suffering a broken right hip.",1
"An employee lost his footing while stepping out of his truck. He fell to the ground, suffering a broken femur.",1
"An employee had just repaired a portable pallet wrapper and was remounting its metal table top. As he made fine adjustments to align the mounting holes, the table shifted and his left middle finger was caught between the table and a support roller. The finger was degloved and later amputated at the first knuckle.",0
"On March 17, 2021, an employee was working in the bucket of a bucket truck when a box truck drove under the bucket and struck its bottom. The bucket turned 90 degrees and ejected the employee, who landed on top of the box truck and then rolled off it to the ground below. The employee suffered a head injury and was hospitalized.",1
"An employee was accessing the top of a river barge with a portable ladder. The employee fell from the ladder, suffering a broken bone in the shoulder area.",1
"An employee was removing a panel/guard from a pasting machine so it could be cleaned. The roller inside the machine smashed his left little finger, which was amputated up to the first knuckle.",1
"An employee tried to jump onto a slow-moving truck, but fell under it. The wheel drove over him and broke his pelvis.",1
"On March 18, 2021, an employee was hospitalized after their foot was crushed between a forklift and a steel beam.",1
"An employee was counseling an inmate when the inmate charged him, throwing him to the concrete floor and breaking his hip.",1
"An employee was stepping off a forklift when his left foot was pinched and lacerated by another, moving forklift.",1
An employee was working on a CNC machine when his glove was caught and pulled. His right ring and little fingers were amputated.,1
An employee was helping to lift a pallet of glass bottles that were stacked on top of each other in approximately 11 layers. The employee assisted with splitting the layers in half when the pressure on the pallets caused one of the bottles to break. The employee suffered a laceration on his right ring finger that resulted in a fingertip amputation.,0
"An employee was stepping onto a lumber landing when his foot slipped on the landing's edge. His right hand was caught in a conveyor roller as he tried to stop his fall, and he suffered several broken fingers and lacerations.",1
"An employee was riding on a push cart, with both feet off the ground, when the cart tipped. The employee fell and was struck on the right leg by the cart's handlebar. The employee suffered a broken femur.",1
"An employee was pressure-washing ductwork. As he was adjusting the pressure washer, it came back and hit his face and eye. He suffered cuts to the right eye and was hospitalized.",1
An employee was lowering a spool on a take-up machine. The spool went up instead of down and pinched his left index finger against a knob. He suffered an amputation at the first joint.,0
An employee was struck by a vehicle while picking up a trash container. The employee was hospitalized.,1
"An employee was performing a post-remediation inspection. As he looked up at metal beams, cross-members and columns with a flashlight, he fell through a floor opening onto a bunch of boxes (filled with filters) on the floor below. He was hospitalized.",1
"An employee was helping replace a die on a pellet mill. A blow from a sledgehammer caused a small piece of metal to fly off and strike the employee in the abdomen. The employee was hospitalized, having suffered a ruptured spleen.",1
"An employee tripped while opening a shop door from the outside. He fell, breaking his left elbow and injuring his shoulder.",1
"An employee was coaching another employee on using a stamp machine. The machine was activated while the employee's right hand was in its feeder area. It pressed down on the employee's hand, causing a complete amputation just below the thumb.",0
An employee fell off a ladder while climbing it. The employee landed on the ground and suffered a leg injury.,1
An employee fell from the roof of a garage inside a warehouse after descending a 5-foot ladder. The employee landed on the ground 11 feet below and suffered a broken hip.,1
"An employee was operating a forklift when its forks became caught in the sandy ground. It tipped forward, and momentum caused the employee's head and body to strike the forklift's structure.",1
"An employee was unloading steel coils from a barge. A crane cable snapped, causing a coil to roll over the employee's left leg and crush it.",1
An employee was working under the dashboard of a vehicle with a sharp pick tool. The tool slipped from his hand and lacerated his right eye.,1
"An employee slipped on ice/snow in a parking lot and fell, hitting his head.",1
"Employees were replacing a 6-inch metal pipe fitting. As they were aligning the pipe, it swung into a concrete wall. An employee's hand was caught between the pipe and the wall. The employee was hospitalized for surgery.",1
"An employee was unloading a bin off a pallet. The employee's foot went between the slats of the pallet, causing the employee to fall to the floor and suffer fractures to the hip/pelvis and wrist.",1
"On March 18, 2021, at approximately at 3:30 PM, five employees were lifting a car transmission on a pallet off of a truck on a rainy day. While lifting the pallet, the transmission slid and the five employees quickly set the pallet on the truck again and the injured employee's finger was trapped between the truck and the pallet resulting in a fingertip amputation.",0
"An employee was positioning a container roof. The roof sliced off the top of the employee's middle finger at about the top knuckle, amputating about an inch of finger.",0
An employee was releasing a handle on a mast climber. The handle amputated the tip of the employee's left index finger.,0
"An employee was helping an operator move plastic drive mats. The mats slid to the side across the ground; the employee could not move out of the way and fell to the ground, breaking his hip.",1
"An employee was adjusting the film of a packing machine when a button was pressed and the arm came down on the employee's left thumb, resulting in a fingertip amputation.",0
"A maintenance technician was inspecting the front suspension on a garbage truck. When the steering wheel was turned, the employee's head was pinned between the tire and the cab of the truck. The employee suffered a face fracture.",1
"An employee was walking toward a parking lot when she tripped and fell to the ground, suffering a broken hip. She was hospitalized.",1
"An employee was in a trash chute removing jammed plastic. The chute had been lifted with a chain fall and was being held in place with a nylon chocker strap. When the plastic was removed, the chute dropped about 3 inches and a sharp object cut the strap, causing the chute fall another 3 feet. The employee's right leg was broken above the ankle.",1
"On March 19, 2021, an employee missed a step at the bottom of some stairs and fell, suffering an ankle/foot injury. The employee was hospitalized.",1
"Three employees were working on a bridge while in a mobile working platform. The platform fell, and the employees fell with it to the ground about 16 feet below. One of them suffered a broken leg and was hospitalized, requiring surgery.",1
An employee was transferring gear from one truck to another when he fell off a truck step. He landed on the ground and suffered a broken right hip.,1
An employee was riding an electric pallet jack to a charging area. His foot was caught between the jack and the charging area. He suffered a laceration to the lower leg and fractures to the left fibula and tibia.,1
"An employee was cleaning mud off the lights on a truck after a cargo container had been unloaded from it. As the truck's lift gate was being put away, the winch cable engaged and pulled in the employee's hand, lacerating it and causing four fractures to the palm.",1
An employee opened the doors on a trailer. Bundled cardboard boxes fell out of the trailer and knocked the employee to the ground. The employee suffered a broken femur.,1
The wheel of a grinder disk broke off and struck an employee (standing 6-7 feet away) in the eye. The employee suffered an eye injury.,1
An employee was exiting a car in a parking lot. The employee stepped onto broken pavement and suffered a broken right leg.,1
An employee was rolling a dumpster out of a containment box when they suffered a broken ankle.,1
"An employee was clearing out sawdust from a rotary feeder. The employee's right middle finger was caught by a paddle wheel inside the feeder, causing the amputation of the fingertip. The machine was not locked out at the time.",0
"An employee collapsed, suffering from dehydration. The employee suffered an injury to the back of the head where it struck the floor.",1
"An employee was placing a connector to a hot mold. Some moisture got into the mold, causing it to pop. The employee suffered burns to his leg, his heel, and the back of his head.",1
"An employee was operating an electrical chain hoist. As he was engaging the hoist to lift, using the pendant with his right hand and holding the hook with his left, his left index fingertip was caught between two contact points. As the chain went in, the tension amputated the fingertip.",0
"An employee was operating a forklift when it struck a structural pole in a building. The employee's head struck a side view mirror on the forklift, causing an eye contusion.",1
"An employee fell to the floor and suffered a dislocated/broken right ankle. She was hospitalized, requiring surgery.",1
An employee was standing behind a horse when it kicked him in the face. He suffered six broken teeth.,1
An employee received acupuncture as part of a training when they suffered a collapsed lung that resulted in hospitalization.,1
"An employee was unloading a pallet jack. The employee slipped and the jack ran over the employee's foot, breaking bones in the foot.",1
An employee was struck by a car while crossing the road. The employee suffered a back injury.,1
"A temporary employee was taking a measurement from a ladder leaned against a truck trailer. The ladder moved and the employee fell to the ground, suffering fractures. The employee was hospitalized.",1
Two employees were replacing the threads on a 4-inch riser tube on an underground storage tank. The tank flashed over and blew the manway off. One of the employees suffered third-degree burns on 50 percent of their skin surface.,1
An employee was using a shear machine to separate brass when his left arm contacted the shear blade as it was coming down. The employee's arm was surgically amputated.,1
An employee was cutting pork chops with a bandsaw. The sawblade amputated the employee's right index finger.,0
An employee was descending a fixed ladder on the back of an antenna inside a radome. He fell from the ladder to the radome deck about 12 feet below. He suffered a broken heel and a broken rib.,1
"An employee was moving a pallet from an elevated shelf. A small piece of wood fell from the pallet, striking the employee in the eye.",1
"An employee was leading a patient back to their room. The patient pushed the employee, who fell to the floor and suffered a broken right shoulder.",1
"At about 3:30 p.m. on March 20, 2021, employees were changing the lap on a signature on a printing press. An employee was checking to see that the lap was flush when his right index finger was caught under a plate. The fingertip was amputated.",0
An employee suffered an amputation to the left little finger while servicing a cryo-vac machine.,0
"An employee was positioning a steel beam to be welded. As the beam was being lifted to turn over, it got caught on rollers. It came loose while the employee was trying to dislodge it, and his left hand was caught between the beam and a roller. He suffered amputations to the first and middle fingers just below the nails.",0
"While the band on some elevated tubing was being cut, the tubing fell off its rack and hit an employee's leg and foot. His leg was broken and he suffered multiple fractures to the foot.",1
"Employees were lifting a 3-foot by 3-foot, 250-pound cover. A knot failed and the cover fell to the bottom of a hole, striking an employee's left foot. The employee suffered three broken bones.",1
An employee became dizzy and fainted in the street while returning to a patient's home from a store. The employee landed on the ground and suffered a broken left arm.,1
An employee was working in a rail yard coupling rail cars when his left leg was pinned between rail cars at the knuckle joint. The leg was broken.,1
"An employee separated two pallets of product, wrapped them, and then began to back his pallet jack under them. The jack pinned his foot against the rack, breaking his femur.",1
"An employee was helping a patient to the restroom. The patient lost consciousness in the restroom and fell back toward her, causing them both to fall. The toilet struck the employee's right knee, causing a fracture to the tibia at the knee.",1
"An employee was diagnosing issues with a palletizer. As he was working to realign the row-former and removing bolts on a guard to access the counterweight mechanism, the counterweight actuated. He was caught between the row-former and a steel support beam and suffered broken ribs.",1
"At the end of a shift on March 21, 2021, an employee developed back pain while lifting a container of lettuce. The employee was hospitalized, having suffered strains.",1
"On March 21, 2021, an employee was walking in a powerhouse's boiler area when a large non-return valve ruptured. The employee suffered steam burns to the hands and face and was hospitalized.",1
An employee was on an auger when it was turned on. The employee suffered a toe amputation.,1
An employee was using a horizontal bandsaw when his left hand and fingers were caught between the saw clamp and the part on the saw. He suffered a finger amputation.,1
"An maintenance employee was assisting with rebuilding a machine when the machine's bottom plate dropped down and caught the employee's right ring finger, resulting in a fingertip amputation.",0
"An employee was loading tires onto a flat trailer. He tripped and fell, striking his head on the ground and suffering hairline skull fractures. He was hospitalized.",1
"An employee was pulling on a tree limb when another tree limb rolled and struck the back of their head, causing injury.",1
"On March 22, 2021, at approximately 1:15 AM, an employee was picking a case of oranges in the produce department while a fork truck was moving a pallet nearby. It's forks swung to the left and struck the employee's lower right leg. The employee sustained fractures to the tibia, fibula, ankle, and foot.",1
"An employee was recovering loose straws between the roller and the drive bar on a packer/case sealer. The employee's left little finger was caught between the roller and the drive bar, leading to an amputation of 1 centimeter of the fingertip.",0
An employee was cutting strips of beef with a bandsaw. The saw amputated the employee's left thumb.,0
Two employees were lowering a dock plate to the floor. One employee's left hand was caught between the plate and the floor as the plate dropped. The employee's index fingertip was crushed and was later amputated.,0
"An employee was using a stand-up forklift to pick up a metal bin. The mast of the forklift hit an overhead door, causing the forklift to tip over backwards. Inside the cab, the employee suffered seven broken ribs and a broken collarbone.",1
An employee was descending a fixed ladder when he fell to the ground about 4 feet below. He suffered a broken leg.,1
"An employee fell while changing a compressor air filter, suffering an injury that required hospitalization.",1
An employee got up from his desk to go see a patient when he fell and broke his hip.,1
"An employee was adjusting an element of a hydraulic system to correct a leak. The bucket of the bucket truck fell on him, causing a head laceration and a possible fractured rib.",1
An employee was unlocking a trailer from a dock. The employee jumped from the dock to the ground and sustained ligament and tendon damage to both knees.,1
An employee was struck and injured by a forklift. The employee was hospitalized.,1
"An employee parked a forklift on a ramp. When the employee got off the forklift to close an overhead door, the forklift started rolling. The employee got on to stop it; it hit a tier rack and the rack fell on the employee, catching his left foot and ankle. The employee developed a muscle injury that required surgery.",1
"An employee was putting the dock plate into a trailer. His foot slipped and he fell, suffering a broken bone in his foot.",1
"An employee fell off a truck while working on concrete pump pipes, landing on the ground and suffering a head injury. The employee was hospitalized.",1
"An employee was conducting general cleanup around the gin and fell from the catwalk. The employee was hospitalized, having suffered a head laceration, a broken collarbone, and broken ribs.",1
"An employee was descending a concrete stairway with wire rope guardrails. He began to fall and grabbed the guardrail, which gave way. He fell to the concrete floor about 15 feet below, suffering a left-side impact that caused an eye socket fracture and other fractures. He was hospitalized, requiring treatment including a rod in his back.",1
"An employee was removing scrap from a conveyor belt when their hand became caught on the conveyor belt and drawn into the pinch point between the belt and the tensioner roller, resulting in a broken arm.",1
"An employee sprayed glue on the porch of a trailer. He then grabbed a drill to remove two screws and a spark from his drill ignited the fumes from the glue, burning his face, arms, and legs.",1
"An employee lost consciousness while casing mail. The employee was hospitalized, suffering from dehydration.",1
An employee suffered an amputation while assembling food packages using a grommet machine.,0
"Two employees were setting a metal pipe in place for installation on a metal rack. When one employee pushed on the pipe, the other employee's left index fingertip was pinched between the pipe flange and a conduit. The employee's left index fingertip was amputated.",0
"At about 10:15 a.m. on March 22, 2021, an employee was working with a part on a bench disk grinder. The disk caught the employee's left glove and pulled in the employee's middle finger, amputating the fingertip. The employee was hospitalized.",1
"An employee fell off a baker scaffold to the wooden deck 39 inches below, suffering head, neck, and back injuries. The employee was hospitalized.",1
A postal carrier slipped on ice and fell while walking to their vehicle. The employee suffered a broken ankle and was hospitalized.,1
"An employee set up a ladder and was climbing up to tie it off when the ladder shifted. The employee fell onto the concrete approach. The employee was hospitalized with broken ribs, a back injury, and a cut on the head.",1
"An employee was climbing up a fixed ladder attached to a tank when she fell from the ladder and suffered a broken ankle, resulting in hospitalization.",1
"A veterinarian was helping another employee put a dog in a kennel. The dog bit the veterinarian on the left arm, causing a puncture and a laceration.",1
An employee was repairing a breader. The employee was unjamming a clog from it when its incline chain paddles struck the employee's left hand. The employee suffered an amputation to part of the middle finger.,0
"An employee was operating a stand-alone pallet tugger. The tugger ran into a pallet of toiler paper, and a piece of cardboard in the way cut her right thumb severely.",1
An employee fell from the back of a golf cart as it turned. The employee landed on the pavement and suffered a broken left collarbone and two broken ribs. He was hospitalized.,1
"An employee was spinning the belts on a machine after the machine had jammed. The employee's ring finger was caught between the belt and the sheave of the machine, causing a partial amputation to the fingertip.",1
"An employee was working on a press brake machine. As he aligned sheet metal against the backstop, the machine actuated and injured both his hands.",1
"An employee was looking at a customer's truck and RV hitch setup. A tension bar hit the employee in the head, knocking him unconscious.",1
"An employee was using a table saw to cut a piece of wood. The wood jumped, causing the sawblade to amputate the employee's middle finger.",0
An employee was working from an extension ladder that was supported by a wooden bump pole. The pole broke at the bottom as the employee was approximately 28 feet in the air and the employee fell to the ground sustaining a compound fracture to a leg.,1
"An employee was sanding a shaft that went through a motor and gearbox. The shaft caught his glove, causing him to suffer an amputation of the left index finger and a broken left middle finger.",0
"An employee was putting a dislodged plastic belt section back into position on a conveyor. The conveyor shaft rotated, causing the conveyor to lacerate and fracture the employee's right thumb. The employee was hospitalized and underwent surgery to the thumb. The machine was not guarded at the time of the incident.",1
"An employee was running production on a chopper machine when material got stuck behind the blade. While clearing the material, the machine cycled and amputated his right index fingertip.",0
An employee was leading a ski school class and was demonstrating a technique when she skied over a soft mound of snow that caught the edge of her ski. Her ski binding released and she fell to the ground and sustained a spiral fracture of the left tibia and fibula.,1
"On March 23, 2021, an employee was using a circular saw to cut rotted wood on the roof of a one-story house when his foot slipped from under him, causing his steering/controlling hand to contact the blade of the circular saw. He sustained the amputation of the left index fingertip without bone loss.",0
"An employee had been putting money in a vault. As she was shutting the vault door, her hand got caught in the door and her right index finger was amputated at the knuckle.",0
The injured employee was lifting a manhole cover with another crew member when it slipped off the lifting hook. The injured employee's left index finger was caught under the manhole cover and the fingertip was amputated.,0
An employee was working to clear a pump for maintenance and was sprayed with hot oil. He sustained first degree burns to the right wrist and lower portion of his face; and sustained first and second degree burns to his left wrist. The employee was hospitalized.,1
An employee was installing water proof sheathing and fell 30 feet from the lift truck to the ground. The employee was hospitalized for multiple fractures.,1
"An employee was working on a vertical chain drive on a dumper. When the employee tried to take slack out of the back side of the chain, the carriage of the dumper shifted down a few inches. The chain on the drive sprocket tightened and the employee's right middle finger was caught between the chain and the sprocket. The finger was partially amputated.",0
An employee was standing on a sidewalk rigging a steel column when a masonry wall was struck by the tines of an all-terrain forklift. The wall toppled onto the employee causing a leg injury.,1
"An employee was jumping up to activate the tilt lever on a telehandler. The dump box tripped forward and came back down on the telehandler's forks, pinching the employee's left index finger. The employee suffered an amputation to the finger.",0
An employee lost his balance on a straight ladder and fell. He sustained fractures to a leg and foot.,1
An employee fell from a roof and was injured.,1
An employee was trying to reconnect an airline between a tractor and a trailer while on the side of the road. The truck began to move. The employee fell under the truck and was run over as the truck pulled away. The employee suffered multiple fractures.,1
"On March 23, 2021, at approximately 9:15 AM, an employee was positioning a steel frame for shipping and pinched the tip of his left ring finger between two metal pieces when he set it down. The employee's left ring fingertip was amputated at the nail bed.",0
"An employee was operating a sizing press. The employee's left thumb was caught in the point of operation, causing an amputation to the thumb tip.",0
An employee was separating an injection molding tool. The employee hooked up one of the mold's two sides to overhead hoists and began to separate the mold. The other side (weighing 500 pounds) fell over and crushed the employee's left ring finger against a work bench.,1
An employee was working on an electrical panel. An arc flash burned the employee's left arm.,1
"An employee was descending from a column form. He slipped and fell to the concrete about 3 1/2 feet below, suffering a broken wrist and broken vertebrae.",1
"An employee had been stocking the cooler/freezer area. While moving a box, the employee felt a sharp pain. The employee was hospitalized with a bulging disk.",1
"An employee tripped and fell while walking down stairs. She landed on the floor, suffering broken ribs and a broken arm.",1
"While moving a tote, an employee tripped and fell to the floor resulting in a fractured left hip.",1
"An employee was using an overhead crane to load a bundle of hexagonal bars onto the conveyor belt of a die bench machine. When the employee unstrapped the bundle, a hexagonal bar moved  and crushed the tip of his left thumb against another bar resulting in a fingertip amputation.",0
"An employee was patching a concrete wall when he fell off a ladder, suffering a broken leg.",1
An employee fell on wet pavement while trying to get into a car. The employee suffered a compound fracture to the left leg.,1
"On March 23, 2021, a temporary employee was working from a beam when he fell to the floor 4 or 5 feet below, suffering a fracture to his tailbone and hip. He was hospitalized.",1
An employee was trying to move a pallet with a roll cage on top of it. The roll cage moved slightly and pinched the tip of his thumb against the roll cage. The thumb tip was amputated.,0
An employee was walking through the barn when he slipped on manure in the back alley and fell on a crate. The employee was hospitalized with injuries to the ribs and torso.,1
An employee suffered a hand laceration while hopping over something. The employee was hospitalized for an infection.,1
"An employee got off a forklift, which then moved forward. Its fork pinched the employee's foot against a pallet shrink wrapper, breaking the foot.",1
An employee was moving a metal manifold with a jib hoist. The employee lowered the manifold onto the cart and was using both hands to position the manifold. The pendant struck the metal manifold and hoist lifting hook and broke the back cover off which exposed the live electrical terminals. The terminals then contacted the metal and shocked the employee resulting in a burn to the back of their left leg. The employee was hospitalized.,1
"On March 24, 2021, an employee was running a 10-inch laminating rotary dye press machine when their right hand was caught in a raw material called ""webbing"" which pulled their hand between two rollers and caused a partial amputation to three fingers.",1
An employee was working on an electrical switchgear with two other employees. The switchgear was energized and an arc flash caused third degree burns to the employee's hand. The hand was surgically amputated.,1
An employee's glove was caught in a machine's rotating blades. The employee suffered a fingertip amputation.,0
"Three Kaplan Corporation employees were helping a delivery driver, who was using a pallet jack to unload a pallet of glass from a delivery truck. One of the jack's wheels hung up on uneven pavement around a manhole cover. One of the employees was trying to free the wheel when the jack's hydraulics were released and it dropped its load to the ground. The employee's right index finger was amputated at the first knuckle.",1
"An employee was stepping off a sidewalk when they lost balance and fell into a glass door, resulting in fractured arm.",1
"While training to operate a pallet jack, an employee was pinned between the jack and a rack. The employee suffered a broken ankle.",1
"An employee was on an order picker, loading a pressure washer in the bay, when he lost balance and fell approximately 6 feet to the concrete. The employee sustained a head injury, a fractured hip, a fractured rib, and a punctured lung.",1
"An employee was performing maintenance on the frame of a forming machine. When the employee closed the slatted frame, his right ring finger was pinched between it and the outside shoe bellows clamp. He suffered a partial amputation to the fingertip.",0
An employee suffered an open fracture to the right middle fingertip. The fingertip was partially amputated.,1
"A backhoe struck a vent pipe while digging next to it, causing the weld at the bottom of the pipe to fail. The pipe fell and struck an employee on the hardhat. The employee suffered a forehead laceration.",1
"An employee was changing out porcelain bells to polymer bells on a single phase conductor and received an electrical shock, resulting in first degree burns under his right arm and second degree burns in his left armpit.",1
A crew was lifting a wooden framed wall when the wall slipped and fell on an employee resulting in fractures to his thoracic spine.,1
"An employee was inside a gantry press, trying to reposition a jack. The machine was started while the employee's left hand was outside the boom. The employee's hand was crushed.",1
"A letter carrier went up on a porch to deliver mail to a home when a dog came out of an open window in the screen door and attacked her, biting the left side of her face. A second dog also attacked, biting her on the right calf. The employee was hospitalized and required reconstructive surgery on her facial wounds.",1
"On March 24, 2021, at approximately 8:05 AM, an employee was sweeping the floor. She bent down to pick up the broom and the top of the broom poked her right eye. The employee was hospitalized and had eye surgery.",1
"An employee had been conducting ramp operations using a roller bed to load air freight. While folding the roller bed for storage, his left hand was caught between sections and his left index finger was crushed. The employee was hospitalized and the left index finger was surgically amputated.",1
"An employee was rolling a machine down a ramp, from inside a warehouse to the outside, so he could load it on a delivery truck. At the bottom of the ramp, he tripped over the forks of a fork truck, and his right leg was caught between the fork truck and the machine he was moving. He suffered a broken right leg.",1
"On March 24, 2021, an employee was using a push cart to move packages inside the building. As he was turning left, his thumb was caught between the cart and one of the building's metal support beams. He sustained a compound fracture to his left thumb and was hospitalized.",1
"An employee was on an extension ladder working on cable lines. While descending the ladder to retrieve the replacement section of coaxial cable, the existing/defective cable broke, causing the extension ladder to move and the employee fell approximately 16 feet from the ladder to the ground below. The employee was hospitalized for blunt force trauma to his ribs and the back of his head.",1
"A temporary employee was on a step ladder adjusting an open-web bar joist in the overhead of a hanger bay. The joist slipped and as the employee grabbed the joist, it lacerated the palm of the employee's left hand. The employee was hospitalized.",1
An employee suffered a back sprain while moving a lid from a septic tank.,1
An employee was cleaning their work area. The employee stepped backward and tripped over a pneumatic air-line. The employee then fell and broke their left wrist.,1
"An employee was using a jointer to cut an acrylic piece. As he was reaching to adjust the wheel with his right hand, the machine was activated and its blades made contact with the fingers on his left hand. They amputated the top half of the index finger to the first distal knuckle, as well as severely lacerating the middle fingertip.",0
"On 3/24/2021, at 11:30 AM, an employee was cutting a small piece of lumber on a table saw. The employee was removing the scrap piece when his left index finger contacted the moving blade and the fingertip was amputated.",0
"An employee's shoe cover was caught on the wheel of a baby crib. She tripped and fell, suffering a broken left hip.",1
"An employee was mixing two-cycle fuel for a concrete saw when sparks from concrete sawing ignited the gasoline vapors, causing a fire and burning the employee. The employee sustained severe burns to the hands, neck, and face.",1
Two employees were removing a broken drive chain that weighted approximately 70 lbs. from a sprocket on a bottom plate motor. The injured employee's hand slipped from the oil on the chain and their right thumb was pinched between the chain and sprocket causing a partial thumb amputation.,0
"An employee welded an I-beam into place. The employee then turned to the left and struck his left eye against the I-beam, sustaining an eye injury.",1
"An employee was clamping an aluminum part into the chuck of a vertical turning lathe when the foot pedal was engaged causing the hydraulic clamp to close on the employee's left ring finger, amputating the fingertip.",0
An employee was testing a new snowboard jump and landed on his head on the ground. The employee was hospitalized with a concussion and an abdominal injury.,1
An employee was grinding rough edges off a piece of metal plate. The employee's right thumb was caught between a vertical rotating grinding disk and the tool table/rest. The employee suffered tissue damage and an amputation of the thumbnail/fingertip.,1
"An employee was using a pressure washer to wash the walkways of a property. When he pulled the hose, the wand slipped and water flow hit his right forearm, resulting in a severe laceration.",1
"An employee was on a ladder working a customer's service line on a utility pole by the road. The utility pole broke causing the employee to fall to the ground. The employee sustained fractures to the L2, L3, and L4 vertebrae, as well as whiplash.",1
An employee had been cleaning up debris on a roof. The employee fell through the roof substrate and hit his leg on a steel beam inside the building. The employee sustained a laceration to the right leg and a broken fibula.,1
"An employee was moving a test fixture for armored vehicle glass when one of the wheels failed, causing the fixture to tip onto the employee and fracture their right foot and injure their left knee.",1
"An employee was unloading oil and fell from the truck to the ground, resulting in a loss of consciousness and lacerations to the head.",1
"An employee was helping to change out a cylinder on a press. He was putting the cylinder arms down to put the cylinder in place. As he stepped over the driveshaft to pull the pin and roll the cylinders, he lost balance and started to fall forward. He dropped the cylinder arm to regain his balance and the arm came down on his right index finger and amputated the fingertip.",0
"On March 25, 2021, a security officer was working at the return desk and went outside the return doors to investigate a commotion. A customer shot the security officer in the head with a gun. The security officer was hospitalized with a head injury.",1
"An employee was riding on an electric maintenance cart that contained metal rolls. The employee was holding onto the rolls when the cart hit an object. The rolls moved and smashed a finger on the employee's left hand, causing the amputation of half of the first joint.",0
A fire occurred at the initiator tanks area within the facility when a small amount of organic peroxide slowly leaked by a gate valve into the main header flush line over a two-day period. The peroxide sat in the flush line and slowly decomposed as it warmed up. A production operator had been walking by the initiator tanks area when the fire broke out. He suffered burns to his back and lower body and was hospitalized.,1
"An employee was aboard a vessel and had been loading the cargo hold. As the vessel was closing the front and back hatch, the employee was retrieving twist locks to place on the hatch once closed. When he leaned over to pick up some more twist locks his left hand was caught by the wheel from the hatch cover. Four fingers on the left hand were amputated.",1
"An employee prepared medicines at a med cart. The employee went to turn and her foot got stuck in the cart. The employee fell backward onto the floor, fracturing her right hip.",1
"An employee was operating a stand-up forklift and collided with a parked stand-up forklift, resulting in a broken foot.",1
"On 3/25/2021, an employee was driving from the warehouse to a designated lot space. While turning, the trailer became unstable and began to tilt and the cargo container detached from the chassis. This motion forced the tractor to rise off the ground. As the container slid off the chassis, the tractor came down with force and bounced four times before coming to rest. The employee struck their face on the steering wheel and was hospitalized with multiple fractures to the face and head, a laceration above the left eye, and bilateral eye bruising/swelling.",1
"An employee was riding on the passenger outside side cab of a moving garbage truck. He lost his footing and the truck drove over his right leg and foot, breaking all the toes in the foot. He was hospitalized.",1
"An employee was moving a cart with a grey board on it. Due to shifting of the cart or a wheel catching on an obstruction, the cart tipped over and struck two employees. One employee sustained a laceration on his arm requiring hospitalization.",1
An employee was installing structural steel. The beam the employee was sitting on dislodged and fell off the support it was on causing the employee to fall 10 feet. The employee was hospitalized with a leg laceration.,1
"An employee was preparing to pull plastic netting through an orienter (a machine that heats and stretches plastic film over a series of rollers). The employee tied a string to the netting, wrapped the string around his left hand, and began to pull the string through the machine to the end roller. The roller started, and the string tightened around his left hand. His ring and little fingertips were amputated.",0
"An employee tripped on a rug in a lobby and fell, suffering contusions and a fracture to the right side of the pelvis.",1
"An employee was moving an empty water tank. A finger on his left hand was caught and fractured between the water tank and a stationary surface. He was hospitalized, requiring surgery to the finger.",1
"An employee was using a lift/hoist to lift a part for inspection. The employee's finger was caught between the part and the strap, causing the amputation of the fingertip.",0
The injured employee and a co-worker were taking off the service cap of a king valve when refrigerant discharged into the injured employee's glove at high pressure causing burns to the left hand that required hospitalization.,1
An employee was lifting a bucket full of leaves when he began to suffer lower back pain. He was hospitalized.,1
An employee tripped over a fitted sheet and fell to the floor fracturing their hip.,1
An employee was smoothing a metal plate using a bench grinder when the end of their thumb was caught between the material and the grinding wheel. The employee sustained a partial amputation (approximately 25 percent) of their left thumb.,0
"An employee was closing the dock door at approximately 11:50 PM on 3/25/2021. As he pulled the cable to close the door, the cable wrapped around the yellow safety pole and was pulled taut against the pole. The employee's left middle finger got pinched between the cable and the pole and the fingertip was severely lacerated. The employee required hospitalization and surgery.",1
"An employee was working with a child patient when the patient crawled behind her. The employee tripped over the patient, fell, and lost consciousness.",1
"An employee was repairing a water pump in a car wash. The pump was energized and actuated when a car entered the car wash tunnel. The worker's right hand was caught in the belt/pulley system, resulting in three partial finger amputations on the right hand.",0
"An employee was dismantling a scaffold when a pin was knocked out of the scaffold and vibrations caused a plank to fall. The employee stepped down on the plank and then fell to the ground, resulting in a hip injury.",1
"On March 26, 2021, an employee was walking across the lab and her left boot laces caught on the speed lace eyelets of her right boot causing her to fall on the floor and fracture her right ankle. She was hospitalized.",1
An employee had been placing a die in a press. The employee lost balance on a platform and fell 17.5 inches to the concrete surface below. The employee was hospitalized with a laceration on the back of the head.,1
An employee was sitting at a desk using a computer when they suffered an asthma attack after being exposed to carpet cleaner.,1
An employee was cutting a piece of drapery fabric in half when her left index finger contacted the blade resulting in a partial amputation of the fingertip at the nail area.,0
"While hooking up a crane, the crane rigger signaled the crane operator to slack off. The operator slacked off and one chain was removed. When the rigger went to remove the second chain, the counter balance fell to the ground. The counter balance hit the rigger's left foot and severed their boot, resulting in injuries to the big toe and the toes next to it.",1
"An employee was cleaning and changing out a winterized auger that seemed to be clogged. The screw in the pipe caught three of the employee's fingers, causing them to be amputated.",1
An employee was performing chimney repairs inside of a chimney. One of the securing lines was severed by the oscillation of the outer concrete covering due to high winds. The employee fell a short distance before being secured by secondary safety lines. This action caused the employee to slam into either the wall or part of the safety cage. The employee sustained a broken rib and a possibly broken shoulder blade.,1
"On March 26, 2021, a temporary employee was cleaning a mixer when her arm got caught in the rotating paddles resulting in the amputation of her right arm. The employee was hospitalized.",1
"An employee came into the shop to repair a zero-turn mower. Boards were placed underneath the mower to prop it up. As the employee was underneath the mower, it fell on top of him. The employee sustained broken ribs, a broken collarbone, and a punctured lung and was hospitalized.",1
"An employee had been removing wooden blocking from a hull in preparation for the hull's departure from the dock. While using a wooden wedge to remove sand from under the blocking, the blocking shifted and the employee's right middle fingertip was amputated.",1
"An employee was climbing down a ladder, slipped, and fell two feet to the ground, resulting in a fractured hip.",1
"An employee was reaching to pull a cardboard box stuck in a conveyor belt transition plate. The employee's right index and middle finger were caught in the transition plate, causing the amputation of the index fingertip.",0
"An employee was loading t-shirts on a screen printing machine. The printing machine rotated, struck the employee's abdomen, and pinned them between a printing pallet and the screen. The employee sustained bruised ribs and a fractured back.",1
An employee was struck by falling pallets in a warehouse. The employee suffered a compression fracture and a head injury.,1
"An employee was helping load trucks. A load of strapped millwork material was brought into the loading area on a forklift. It was unstrapped, then rotated 180 degrees to be lowered onto 18-inch steel trestles. The employee was placing a trestle when some wooden window trim kits shifted from the load and fell onto the employee's head, causing a 3-inch laceration and a concussion. The employee was hospitalized.",1
"An employee was putting a bicycle together when their left index finger struck the disc brake, resulting in an amputation to the fingertip.",0
"An employee was using a ball press when a pin that joins parts of the tool together broke. A part of the broken pin struck the employee in the left eye, resulting in a laceration.",1
"An employee was unloading cargo at a terminal. The employee was struck by a chain and hook, suffering facial lacerations and a concussion.",1
"An employee had been felling hazardous trees in a campground. The top of a tree detached, fell, and struck the employee. The employee sustained injury to the head, shoulder, and arm.",1
"An employee was delivering materials to a customer location. While removing materials from the truck, the employee fell off the lift gate and landed on the ground. The employee was hospitalized with three fractured ribs, multiple left transverse process fractures, and a left scapula fracture. The employee required surgery.",1
An employee was using a torch to cut a shock off a truck. The vehicle caught fire and the employee was burned.,1
"An employee was performing maintenance on a mechanical vapor recompression evaporator when hot water unexpectedly released through the sight glass. The employee sustained second degree burns to his chest, left arm, and right arm.",1
An employee was hospitalized with a foot injury after their right foot was crushed between two powered industrial trucks (PIT).,1
"An employee was repairing a gutter at a customer's home. As the employee was climbing a 15-foot ladder, the ladder tipped over and the employee fell to the ground. The employee sustained fractures to the right elbow and hip.",1
An employee stepped 1 to 2 feet down from a step stool and broke her leg on the floor. She was hospitalized.,1
An employee was unpacking coils of steel when a coil fell on their left foot resulting in a crushing injury.,1
"An employee was maneuvering a cheese cart when one of the cheese tubes on the cart came loose and struck his thumb, resulting in a partial amputation of the left thumb tip.",0
"An employee was filling up a boom lift with a 5-gallon diesel can. He fell from the top of the boom lift's wheel to the ground and his face hit the fuel can. He suffered a cut above his left eyebrow and nose from the fuel can, as well as a broken neck vertebra and a contusion to the right hand from the fall.",1
"An employee was returning a wheelchair to a hospital when they tripped over some construction material outside the front door, resulting in a bruised hip and kidney.",1
An employee was prepping an outboard boat motor for a customer and testing all features. The motor got stuck in the tilted position. The employee was trying to free the tilt lock when the lock freed itself and the motor struck the employee's fingers while they were in the hinge area resulting in amputation of the employee's right pinky fingertip.,1
"An employee was pulling a frame cart for a new job when they tripped and fell, wedging their right pinky finger between the handles of two frame carts. The pinky finger was amputated just above the first knuckle.",0
"An employee reached under a conveyor for an envelope and their left arm was caught in the conveyor, resulting in a fracture to the forearm.",1
An employee was troubleshooting a machine that wraps coating over cable when they sustained an amputation to a fingertip. The machine was guarded at the time.,0
"While performing maintenance on a front end loader/backhoe, an employee removed a pin, which caused the machine arm to come down on the employee's finger. The employee's finger was caught between the machine arm and a stationary object, resulting in a fingertip amputation.",0
"While de-boning cow ribs, an employee dropped his knife. As the employee went to catch the knife it stabbed him above his mesh apron.",1
"An employee was turning an electric pallet jack down an aisle when it struck her ankle, resulting in a fracture. The employee was hospitalized.",1
"An employee was assisting an operator when they noticed an unusual amount of steam/leaking water coming from another area. The employee went to investigate and sustained burns from the steam, resulting in hospitalization.",1
An employee had been climbing a tug boat mast. The employee was working to untangle crane block rigging when high winds blew the rigging over. The employee was entangled in rigging wires and suffered internal injuries.,1
An employee was removing steel pipe from a pump on a water truck when a pipe fell on his right ring finger. The employee sustained a lacerated and twisted finger.,0
"On March 27, 2021, an employee was walking over an island in a parking lot when she slipped on leaves on the ground and fell. The employee was hospitalized with a fractured right ankle that required surgery.",1
"An employee was operating an enclosed pallet jack and stopped to scan a pallet. As the employee reached out to scan the pallet, the cord of the scanner hit the throttle of the pallet jack. The pallet jack lunged forward and pinched the employee's right leg against a doorway protection pole resulting in a lower leg fracture.",1
An employee had been stocking products in an aisle and fell from a ladder cart. The employee's left knee was fractured and dislocated.,1
"An employee of Specialized Equipment Contractors was operating a boom lift while performing work at a plant. While the employee was turning the boom lift around to bring it to a different location, he boomed up to miss some interferences on the ground level and was struck in the face by a ceiling fan. The employee sustained facial fractures, a broken jaw, and a dislocated tooth.",1
"An employee was standing on top of a cooler to view the upper shelves and fell through the top to the cooler floor. The employee sustained a concussion, a broken wrist, and contusions.",1
An employee was walking through a parking lot retrieving shopping carts. She tripped and fell while stepping down from a curb resulting in a fractured right hip.,1
An employee running a check stand/cash register tripped over a box of grocery bags that was on the floor. The employee's left arm hit the floor causing a dislocated left shoulder requiring hospitalization.,1
The injured employee was one of three workers on-site repairing a downed overhead conductor that had been damaged by a fallen tree. The injured employee began to measure the length of the jumper before the circuit was de-energized and grounded. He grabbed a de-energized conductor with one hand and touched an energized conductor with his other hand. The employee sustained electrical burns to both hands.,1
"An employee was attempting to install a cap (a two-part assembly) onto a casing head. The cap was stuck, and as the employee tried to manually thread it onto the casing head, its upper part came down and caught the employee's left thumb. The employee suffered an amputation to the thumb and was hospitalized for surgery.",1
An employee was ripping off excess plastic from a pallet on a conveyor when their left hand was crushed between a pallet and a metal stop on a roller conveyor. The employee sustained a middle finger amputation to the first knuckle.,0
"An employee was driving a stand-up forklift toward a warehouse. The forklift struck a cardboard pallet while turning, and his left leg was caught between the forklift and the pallet. He suffered a broken left tibia and was hospitalized.",1
"An employee had been running a cutting die machine. While clearing a jam, the employee's left hand was caught by the machine resulting in amputation of two fingers.",0
"An employee was stacking merchandise on a pallet when a pallet jack drove past the employee and struck a pallet. As the employee attempted to move out of the way, the employee walked into a pallet, resulting in a right leg injury above the ankle.",1
An employee was painting from a scaffold when they fell approximately 5 feet to the ground. The employee was hospitalized with a head injury.,1
"At 2:17 p.m. on March 29, 2021, an employee fell while stepping out of a tractor. He landed on the ground and suffered a broken left hip.",1
"An employee was changing a trailer hitch. The trailer shifted while the hitch was being removed and fell on the employee's right arm, breaking it. The employee was hospitalized.",1
A forklift operator and two concrete workers were placing concrete forms when the forklift contacted an electrical line. One of the concrete workers was hospitalized with electrical burns.,1
An employee was repairing a trimmer machine. The machine cut the knuckle on the employee's right index finger. The employee was hospitalized.,1
"An employee was adjusting a roller in a press. Her right hand was pulled in and crushed between a rubber tent sleeve roller and another, stainless steel roller. She suffered cuts, contusions, and fractures to the middle, ring, and little fingers and was hospitalized.",1
"An employee was using a box cutter to strip wire. The box cutter slipped and lacerated the employee's left index finger, resulting in an infection.",1
"An employee was charging a gas spring to pressure when the gas spring blew apart, injuring his right hand, left hand, and abdomen. The employee suffered the amputation of three fingers on his right hand and was hospitalized.",1
"On March 29, 2021, an employee was retrieving supplies from a shelf in the storeroom. The employee tripped over boxes on the floor and caught herself by grabbing the shelf, resulting in a fractured left shoulder. The employee was hospitalized.",1
"An employee was installing floor trusses. The employee fell from a first-floor top plate to the basement floor 19 feet below, suffering a broken jaw and head injures. The employee was hospitalized.",1
An employee sustained a partial left index finger amputation when high winds caused the compressor building door to slam on the employee's finger.,0
"An employee was conducting storm clean up. While cutting a limb from a downed tree, the limb snapped and struck the employee resulting in a fractured foot and four broken ribs.",1
An employee was demolishing a floor on a construction site. The employee fell through the floor and sustained broken bones in their left hand.,1
An employee was separating product from an animal carcass using a saw and amputated their left thumb tip just below the nail.,0
"Employees were moving sows. An employee stepped out of a storage area, saw some sows coming down the hallway, and stepped back into the storage area. Before the employee could get the door latched, the sows hit the door, which knocked the employee down to the concrete floor. The employee suffered a broken left hip.",1
"On March 29, 2021, an employee sustained burns to the hand after retrieving a utensil that was dropped into boiling water.",1
"An employee was walking up a set of four or five stairs. The employee fell, suffering arm, shoulder, and head injuries from the impact.",1
"An employee was conducting maintenance on machines in an open warehouse location. The employee developed difficulty breathing, caused by chemical vapors from an intermediate bulk container that was being drained about 30-50 feet away.",1
An employee was stepping into an access hatch at the same time that the hatch was opened from below. The employee fell 3 feet and suffered a broken tibia.,1
"On March 29, 2021, a temporary employee sustained an amputation to the tip of his thumb while attempting to dislodge a stuck blade in a running machine.",0
"An employee was installing hardware during the construction of a bridge. While walking to get a board along the bent end (where the bridge and ground meet) the employee stepped onto uneven or loose ground, lost his balance, and rolled his ankle. The employee sustained a fractured left ankle.",1
"An employee was standing on a plant stand, hanging a frost cover over the plants in a store's garden section. She fell backward from the stand, landing on her back and suffering a potential lower-back fracture.",1
"An employee was shearing metal on a shear machine when the plate came down on his left hand, resulting in an amputation to the pinky finger pad.",0
"An employee was pushing a shopping cart on a driveway. The employee tripped while trying to grab a tray that was falling off the cart and fell to the pavement, suffering a broken pelvis.",1
"Employees were using an overhead crane to put a 500-pound water pump onto three V-shaped stands. The pump shifted, and an employee's right middle fingertip was amputated at the first knuckle by a hook from a strap on the pump and the stand.",0
"An employee was standing outside his forklift, cleaning it, when another forklift backed into him. He suffered internal injuries.",1
"An employee was lifting an electric pallet jack onto a manual pallet jack. When the employee put the electric pallet jack down, his left index finger got caught between the pallet jack and the wheels and amputated at the first knuckle.",1
"An employee was filling a towel dispenser in a warehouse restroom. The restroom door closed on the employee's left hand, causing an amputation of the little finger. The employee was hospitalized.",1
An employee was unloading a trailer and missed a step causing them to fall to the ground and sustain injuries requiring hospitalization.,1
"An employee was using a table saw to cut plastic for conveyor belt transition plates when the saw came into contact with their left pinky finger, resulting in a broken bone and laceration.",1
"An employee was on top of a truck when a high wind caused him to fall to the ground about 10-12 feet below, resulting in a right leg injury.",1
"A hardware installer was working on the fourth level of an apartment construction site. The employee was reaching for hardware that was on a forklift that had been raised to the fourth level and fell to the ground. The employee sustained a broken orbital bone, and lacerations to the face, torso, and right arm near the armpit.",1
"An employee was assembling a packaging conveyor system when their right index finger was pulled into a sprocket of the running conveyor, resulting in a fingertip amputation.",0
"On March 30, 2021, an employee was operating a rubber mill and was removing rubber pieces from the exit side of the cutting machine when the blade amputated the employee's right index finger.",1
"An employee was operating a pallet jack when his load hit a bin, causing the pallet jack to swerve into racking. The handlebars of the jack got caught in the racking and pinned the employee. The employee sustained fractures to the right ankle, the pelvis, and the sacrum.",1
"An employee was looking under a conveyor when it caught his right hand, causing multiple lacerations to the hand.",1
A security guard was responding to a combative patient when the patient punched the guard in the forehead. The security guard became diaphoretic and fainted. The security guard was hospitalized.,1
Two employees were working with a fabrication machine. The machine crushed two fingers on one of the employees' right hand.,1
An employee was moving a pallet with a pallet jack. His leg struck a conveyor that had been extended to a truck trailer. The employee suffered a lower left calf laceration and was hospitalized.,1
"An employee was unloading a truck. The truck pulled away and the employee fell off the back of it, suffering a broken left leg.",1
An employee was pulling a metal cart with a plastic roll on it toward a flatbed truck. His left little finger was caught between the cart handle and a piece of metal pipe on the truck. The finger was lacerated and the employee was hospitalized.,1
"On March 30, 2021, an employee was standing on a metal step, clearing built-up slag to allow water to flow through a trough. When he stepped down, his foot entered the hot water and he suffered second-degree burns to the right shin.",1
"An employee was starting up a tractor. When it started, it ran over the employee, breaking his left leg and hip.",1
An employee was hospitalized for carbon monoxide poisoning after painting outside.,1
An employee was spotting a dump truck. The truck raised its bed into a high-voltage overhead powerline while the employee was touching a hopper connected to the truck. The employee was shocked.,1
"An employee slipped and fell on a wet floor, suffering a head injury and a broken wrist.",1
"An employee was walking through a production area when she tripped and fell over a small lip between the two floor surfaces, fracturing her hip.",1
"On March 30, 2021, an employee walked across an insulated concrete blanket at a work site. He slipped and fell on the blanket, suffering a femur fracture above the right knee, and was hospitalized.",1
An employee tripped and fell while walking back from a dumpster. She landed on the concrete and suffered a broken elbow.,1
"An employee was diagnosing an issue with a military vehicle when their left thumb struck against the vehicle's engine fan, amputating the thumb tip.",0
"An employee was walking to a trash compactor. He stepped up onto a wood platform and fell to the ground about 2 feet below, suffering a broken left wrist. He was hospitalized.",1
"An employee tripped and fell down stairs, suffering a broken left humerus. The employee was hospitalized.",1
"An employee was climbing down a pallet of material. She slipped and fell to the ground, breaking her elbow and twisting her ankle.",1
An employee slipped on a pickle while cleaning. He fell to the floor and suffered a broken femur.,1
"An employee tripped over a pipe on a barge and fell. He suffered a broken hip and was hospitalized, requiring surgery.",1
An employee sustained a puncture injury to the pelvic area after tripping and falling on 4-inch concrete anchor bolts.,1
"An employee slipped and fell to the ground while walking, resulting in a broken bone in the upper left leg and hospitalization.",1
"On March 31, 2021, an employee was emptying a trash hopper when his finger was crushed in the hopper resulting in medical amputation of the finger above the knuckle.",0
An employee was using needle-nose pliers to remove shrink wrap from conveyor sprockets when the machine cycled and pinched his finger in the chain and sprocket. The employee's middle fingertip was amputated.,0
"While loading cattle, an employee attempted to evade a yearling cow and fell onto an irrigation pipe, causing a deep laceration to the left knee.",1
"An employee was descending a set of temporary stairs when they slipped and fell, resulting in fractures in their left foot.",1
"An employee was stocking shelves when they suffered an allergic reaction to nuts and cleaning products, resulting in hospitalization.",1
An employee was attempting to remove a jammed piece of paper from the copier when they lost balance and fell to the floor. The employee sustained a dislocated right shoulder and a broken right hip.,1
"An employee was driving a wooden stake into a concrete form with a hammer. The hammer struck the employee's left index fingertip, causing the amputation of the fingertip.",0
"A temporary employee had just transferred trash and recyclables into a metal trash bin and tried to push the bin into the arms of a trash compactor. The employee pushed the start button and held it down to raise the bin and empty the trash into the compactor, but when the compactor was at its furthest point, he noticed that trash was dangling down. He had reached into the bin to pull out the trash when the bin slid the rest of the way down the compactor arms and caught his fingers against the compactor. The last joints of his middle and index fingers were amputated.",1
"An employee was placing material to be cut in a saw when the saw activated, resulting in the amputation of four fingers on the left hand.",0
An employee was moving products from the truck into the backroom of a retail store. She tripped over a box of product near a walkway aisle and fell on her left hip and leg. The employee sustained a broken left hip.,1
"An employee was clearing wood from the molder when the feed wheel picked up the next wood board pushing the board forward. The employee's right index finger was struck by the board and pinched between another board, resulting in a fingertip amputation.",0
"An employee slipped and fell forward, sustaining a laceration to the forehead that required hospitalization.",1
"At about 9:00 a.m. on March 31, 2021, an employee was using an overhead crane to pick up steel tubing to put it into a tube cutter machine. As the employee reached to remove a tag affixed to the tubing, his left middle fingertip was amputated by the guide gate of the tube cutter.",0
Two employees were rolling a wooden cable spool that weighed approximately 500 lbs. down a flight of stairs. The employees were in the process of spinning the spool around a stair railing when it suddenly rolled down the stairs and pushed an employee to the second deck. The employee lost consciousness and suffered a partial ear avulsion.,1
"On March 31, 2021, an employee was driving a pallet jack out of a freezer when her hand was caught between the jack's handle and a rack. She suffering an amputation to a fingertip.",0
"An employee was operating a rolling machine on top of compost when the rolling machine ran over the top of the employee's hand, resulting in amputation of a finger.",0
"At about 9:30 a.m. on March 31, 2021, an employee was backing an order picker through a narrow aisle, carrying empty pallets. The top few pallets struck a box, then struck the uprights of the high rack, and then struck the employee's left leg and pinned it against the order picker. The employee suffered severe contusions.",1
"An employee was walking to inspect an electrical supply issue and slipped and fell on the wet sidewalk, resulting in fractured vertebrae.",1
"The employee was performing pipefitting duties when they tripped and fell over a bracket on the floor of the inverted hull section, injuring their ankle and back.",1
"On March 31, 2021, an employee was open the doors on the back of a semi trailer. A gust of wind came and moved the door, knocking him to the ground. He suffered a broken hip and was hospitalized.",1
"An employee was aiding in production when another employee moved the table that the injured employee was resting his left hand on, which pinched his hand between the table and a stanchion and caused a partial amputation of the left ring finger.",1
A chef was slicing limes with a knife and amputated their left ring fingertip.,0
A heavy work piece fell out of a machine lathe while it was being lifted out with a crane. It fell and crushed a finger on the lathe operator's hand. The finger was later amputated.,0
"An employee was cutting lumber on a table saw when their left hand contacted the saw, resulting in lacerations to three fingers that required surgery.",1
"An employee was driving a stand-up forklift. As the forklift went around a corner, the employee's left foot was caught between the forklift and a rack. The employee suffered a crushed left foot and ankle and was hospitalized.",1
"An employee was cleaning process lines with steam. After opening the hatch of a 3-foot pit, the employee lost his balance and his leg fell into the pit. The open steam line caused second degree burns to the employee's knee and thigh area that required hospitalization.",1
"An employee was closing the tailgate of a pickup truck and caught their left ring finger in the hinge of the gate, resulting in an amputation to the fingertip.",1
"An employee was running to catch a bus and fell to the ground, fracturing their right leg.",1
"An employee was using a tugboat to winch the barge. While the employee was winching the barge, the winch handle spun backward and struck the employee's right wrist, resulting in a compound fracture of the wrist.",1
An employee was assembling a bike and fixing the brakes when their right thumb tip was amputated (without bone loss).,0
"An employee was walking on the boom of a crane when they tripped on their harness and fell, resulting in fractured ribs.",1
"An employee was removing a bolt from an engine block when the block sank due to rain and crushed the employee's foot, resulting in broken bones.",1
"An employee was descending an extension ladder when they fell, resulting in a fractured L1 vertebrae.",1
"An employee was moving a refrigerator by hand on an unguarded loft and fell 9 feet onto concrete, resulting in fractures to the ankle, tibia, and heel.",1
"An employee was using a broom handle to break up grain debris at his feet. The debris broke free, causing him to fall feet forward onto a grain belt conveyor, 5 feet below the opening. He suffered a scalp injury and possibly other injuries.",1
"An employee was performing a leak repair on the roof of a building. The employee's leg became caught on an object, causing the employee to trip and fall through a skylight approximately 15 feet to the concrete below. The employee sustained broken bones and contusions.",1
"An employee was installing a track pod assembly onto an SSL chassis on the main assembly line when their right index finger was trapped between the track pod and chassis, resulting in  amputation.",0
"An employee was unhooking a planter from a tractor when the planter shifted and fell toward the employee, pinning him against the tractor. The employee was hospitalized with injuries to the jaw and torso.",1
"Employees were guiding a steel lid for a concrete ground box. The lid was suspended by a backhoe. The knuckle of the backhoe curled, causing the lid to swing and pinch an employee's left hand against the ground box resulting in amputation of two fingers.",0
"On April 1, 2021, a temporary employee stepped out of the truck to pick up a residential recycling bin while the truck was moving and he slipped and fell. His left leg was run over by the truck's tire, resulting in hospitalization and the amputation of his left leg.",0
"A forklift operator had dismounted his forklift when he was struck by a farm tractor. The employee was pinned between the forklift and the tractor, resulting in a leg amputation above the knee.",0
An employee was repairing a damaged bundle of lumber and was struck by another bundle coming out of the machine. The employee sustained a broken left tibia that required surgery.,1
"An employee was working on the limits of a conveying ash booster pump discharge valve. When the employee turned, his head struck a straight valve handle, resulting in a laceration to the lower right eyelid.",1
An employee was delivering an order to a customer's car when he fell and hit his head on the concrete.,1
"An employee was walking on a sidewalk and stepped off the edge into mulch and fell, resulting in a fractured hip.",1
"An employee was moving a barge upriver, using a winch and cable to give slack in the mooring lines so they could be removed. As the cable reeled in on the winch, it caught the employee's life vest and pulled him into the winch pulley bolted to a stanchion. He suffered a broken hip and was hospitalized.",1
An employee was driving a walkie rider and pinned their ankle between the walkie rider and a rack base guard plate while turning. The employee sustained a broken ankle.,1
"An employee was getting the barge ready for a load of soy beans. The employee opened the top door of the grain barge and lost his balance, falling 10 to 14 ft. to the bottom of the barge and resulting in blunt force trauma and multiple broken bones.",1
"An employee was unloading a trailer when a pallet of freight shifted, causing the freight to fall and strike the employee. The employee sustained injuries to the head, shoulder, and hand.",1
An employee was walking into the facility entrance and fell to the floor. The employee was hospitalized with a fractured left hip.,1
"An employee was using a bandsaw to cut pork ribs when his finger contacted the saw blade, resulting in a laceration to the left index finger.",1
An employee was removing a squirrel's nest in order to install a router. The employee stepped down from the ladder to the ground and injured their right leg. The employee had surgery for fractured bones.,1
"An employee was on a 5 ft. tall scaffold when the scaffold board gave way, causing the employee to fall through to the floor. The employee was hospitalized with a broken right ankle.",1
"An employee was opening the gates to the dumpster area in order to dump materials. The wind blew one of the halves of the metal gate, striking the employee in the face. The employee was hospitalized with face and neck injuries.",1
"An employee was repairing a roof. The employee fell through the roofing surface to the ground 12-14 below, suffering broken vertebrae.",1
"An employee was setting a metal strip coil in a mill utilizing one of the racks. As the employee was pulling out the crane, the hook caught the last coil and pulled it out of the rack. When the coil tipped backward off the rack, it fell, pinning his right leg to the ground and crushing it.",1
An employee was walking across a parking lot when they slipped on black ice and fell to the pavement. The employee was hospitalized with an injury to the ankle/foot.,1
"An employee was cleaning an operating room when they tripped and fell to the floor, resulting in injuries to the lower back, shoulder, and knee.",1
"An employee was swabbing a drain and caustic splashed into the employee's right eye, resulting in an injury that required hospitalization.",1
"On April 2, 2021, an employee was changing the pads on a grinding machine when the top of the machine fell down on the employee's hand, resulting in amputation of the left middle fingertip.",0
An employee was clearing excess material from an interfolder machine when a knife inside the machine caught and amputated the tip of the employee's right middle finger.,0
An employee was using a saw that was binding. He was holding a board with his right hand and reaching with his left hand when the saw amputated his left thumb from the knuckle up.,1
"An employee was handling a piece of steel and lacerated his finger, resulting in hospitalization.",1
"An employee was at his locker, gathering his equipment when he began feeling ill. The employee went into the cooling room to sit for approximately 20 minutes. The employee left the cooling room to report to his supervisor that he was feeling unwell. While his supervisor was talking to him, the employee collapsed in the supervisor's office and was unresponsive. The employee was hospitalized for heat stress.",1
"An employee was cleaning a machine when their left hand fingers were pulled into the machine, resulting in a degloving of three fingertips and broken knuckles that required surgery.",1
An employee was unjamming a parts elevator when his arm became stuck in the parts elevator. The employee was hospitalized with a broken arm.,1
"An employee was walking in the RV lot when they tripped and fell to the ground, resulting in a fractured right hip.",1
"An employee was hanging and setting anchors on a barge when he was struck in the face by an anchor line, resulting in a facial injury and several lacerations.",1
"On April 2, 2021, an employee was walking in the parking lot when they slipped on ice and fell to the ground. The employee was hospitalized and required surgery for fractures.",1
"An employee fell from a 13"" step stool to the floor, resulting in a skull fracture.",1
"An employee was under a jammed notching machine, removing a board, when the machine amputated the tip of their left middle finger.",1
"An employee was walking to the tube station when she tripped and fell to the floor, sustaining a fractured right wrist and left shoulder.",1
"An employee fell from a chair. The employee's right arm struck a safe mounted to the floor, and the employee suffered injuries to the right arm, lower back, and right hip.",1
An employee was retrieving tools from his work van when the van door closed on his left middle finger resulting in an avulsion injury that required surgery.,1
An employee was on a ladder retrieving a box of soap from the top shelf of a storage room. The employee lost balance and fell from the ladder to the floor resulting in contusions to the head and back and numbness in the right arm and hand.,1
An employee was cutting a piece of wood with a radial arm saw when they suffered the amputation of their thumb.,1
"An employee was walking while carrying a book of rug samples when one sample fell from the book. The employee tripped over the sample and fell, resulting in a broken right hip and a sprained left wrist.",1
A car struck an employee in a parking lot. She fell backwards onto the ground and suffered a broken femur. She was hospitalized.,1
"On 4/3/2021, an employee was stacking dry ice on a production line when the saw that cuts the dry ice jammed. The employee attempted to clear the jam when the saw contacted his fingers, resulting in hospitalization and subsequent amputation of his left ring and pinky fingers.",1
"An employee was inspecting a tire/wheel assembly after he mounted it on a vehicle when the tire blew off, fracturing his left wrist.",1
An employee was riding a ski lift to the top of the slope. The employee fell while exiting the lift and sustained broken ribs and loss of oxygen.,1
"An employee was working with another employee on the wire spooling machine. The employee's leg was caught on the wire being spooled, causing the employee to fall and break his leg.",1
"On April 3, 2021, a resident punched an employee on the left side of her face. She was hospitalized with a fracture to her left eye socket.",1
An employee was serving food and had an allergic reaction to the fish that was being served. The employee was hospitalized.,1
"An employee was cleaning a grill using water. The lid of the grill fell, causing hot water to splash onto the employee. The employee sustained burns to the face and eye.",1
"An employee fell while walking down a flight of stairs. The employee was hospitalized with a bruised left leg and foot, as well as lower back pain.",1
"An employee was patrolling a hospital campus when they were struck by a vehicle. The employee was hospitalized with a broken leg, a broken arm, and a bruised internal organ.",1
"On April 4, 2021, an employee was cleaning dust off a planer machine when their glove was caught in the machine, pulling in their hand and amputating the left middle finger.",0
"An employee was cutting plywood using a table saw. The employee's left hand slipped and contacted the saw blade, resulting in a laceration to the index and middle fingers.",1
An employee was doing carpentry work when he fell approximately 6 feet from scaffolding. He landed on the floor and sustained a concussion.,1
An employee was on a ladder performing a roof inspection when the ladder shifted and the employee fell approximately 10 ft. to the ground. The employee sustained a fractured shoulder and pelvis.,1
An employee sustained a contusion/laceration to their right hand when their hand was caught in the tension stand of a metal slitting machine.,1
"An employee was standing at the shop when the employee was hit by a customer's car, sustaining broken ribs and punctured lungs.",1
"An employee was working from a ladder to install an awning on the second floor of a residential building. The ladder tilted and the employee fell, striking another ladder before landing on their own ladder in a mulch bed. The employee suffered broken ribs, a partially collapsed lung, a broken and dislocated finger, a hairline leg fracture, a head wound, and overall contusions.",1
"An employee was lowering a hydraulic trailer to the ground when a weld broke on the trailer frame causing the frame to fall to the ground. The tire on the driver's side pivoted, causing the frame to strike the employee's right forearm and fracture both bones of the forearm.",1
An employee was installing a beam with a chain fall when it fell and hit the employee on the top of his eye. The employee was hospitalized.,1
"An employee was repairing a water filter pit and fell 10 feet into the unguarded pit, resulting in broken ribs. The employee was not wearing fall protection at the time.",1
"An employee was riding a lawnmower near a creek when the lawnmower flipped into the creek, resulting in fractured ribs.",1
An employee was building wooden cabinets using a staple gun and sustained injuries to their left hand.,1
The employee was walking near the fueling area in order to change trash cans when they tripped on a fuel hose and fell. The employee was hospitalized and had surgery.,1
"An employee was in an attic when they tripped over a beam and fell to the floor, sustaining lacerations to the rib area and blunt force trauma to the abdomen.",1
"An employee was driving a tugger in the warehouse and drove underneath racking, pinning himself between the backrest of the tugger and the racking unit. The employee sustained contusions to the chest.",1
An employee was installing an insulation roll on a roof when a gust of wind blew insulation into the employee and knocked the employee off the roof. The employee fell approximately 25 feet to ground and sustained a fractured pelvis and wrist.,1
"An employee tripped and fell on stairs, injuring their knee.",1
"Two employees were attempting to move a tender truck that was stuck in gravel. Employee 1 was operating a skid-steer loader with a chain that was attached to the mast and to the front of the tender truck to pull on the truck. Employee 2 was operating another skid-steer loader to push on the truck's rear bumper. Employee 1 pulled on the truck and then exited the loader to retighten the chain attached to the loader's mast. Employee 2 pushed on the truck's rear bumper and the truck traveled forward, pinning Employee 1 between the truck's front bumper and loader's mast area. Employee 1 was hospitalized for a fractured pelvic bone, two fractured hips, three fractured bones in the left leg, and internal bleeding.",1
"An employee was assisting in closing an aircraft door when the tips of their right index and middle fingers were caught on the edge of the door, resulting in fingertip amputations.",0
Two employees were working and got into an altercation. One employee struck the other with a 2x4 causing head and back injuries.,1
"An employee was using a bandsaw. The employee's glove got caught in the saw, resulting in the amputation of three fingers.",1
"An employee was leaving a scaffold to get onto a ladder. The tank sheet buckled, causing both the ladder and the anchor of the employee's lanyard to slide off. The employee fell approximately 16 feet and sustained a fractured pelvis.",1
"An employee was operating an overhead crane from a scissor lift. He was holding the object being lifted when the lifting hook caught his glove, causing the employee to fall 10 feet from the scissor lift and suffer fractures to his shoulder, hips, and knee.",1
"An employee was on a ladder installing cable and fell off the ladder to the ground. The employee sustained a concussion, broken ribs, and lacerations and was hospitalized.",1
An employee was working on a pump skid when the employee was struck on the left leg by the pump skid.,1
"An employee was operating a shearing machine when their left middle finger was caught in the clamp's pinch point, resulting in a partial amputation to the nail area.",0
An employee was in a trailer checking the temperature of perishable goods when they tripped over a pallet and fell backward onto the concrete dock. The employee sustained a fractured wrist and two fractured fingers.,1
An employee was operating a standing electric forklift putting a pallet on the floor underneath a rack. The forklift reversed quickly and the employee's arm was crushed between the forklift and the racking. The employee sustained two arm fractures.,1
"An employee was putting down temporary reflectorized striping tape during milling operations. A vehicle ran through the work zone, striking a motorized boom and then striking the employee who was following behind the motorized boom. The employee sustained a broken leg.",1
"On April 6, 2021, an employee was operating a forklift and activated the dead man lever in order to avoid a collision. The forklift stopped abruptly and jerked forward, causing the employee's left arm to get caught between the lift and the racking. The employee sustained a laceration to the left forearm.",1
An employee scratched his left eye on a stationary exterior metal panel of an ice machine.,1
"On April 6, 2021, an employee was prying off formwork from an elevated beam and had one hand placed on a shoring frame head. When the 4x4 board came loose, one end of the board hit the employee's pinky finger resulting in a fingertip amputation.",0
"An employee was removing bolts from a joist assembly when a joist fell and struck the employee, breaking their ankle.",1
"An employee was preparing demo samples when the employee tripped over an open lower cabinet door and fell to the floor, resulting in injuries to the shoulder and hip.",1
"An employee was painting from a 10-foot ladder that was leaning against a wall. The ladder slipped out from the employee and he fell from the third rung, striking his head on the ground and suffering a head injury.",1
An employee was working from a 40-foot wall when they fell 28 feet to the ground.,1
An employee was trying to open the door of a truck that was locked with the keys inside. He fell backward from the top exterior step of the truck. The back of his head struck the ground and he lost consciousness. The employee was hospitalized for a fractured skull and bleeding in the brain.,1
"An employee was taking auto parts out of a storage room when he fell down to the first floor, injuring his right elbow.",1
An employee was using a cut-off saw when the saw blade amputated their left hand.,1
"An employee was attempting to rig an 18' in diameter HDPE pipe. The employee was placing a nylon sling around the pipe when the pipe shifted unexpectedly. The employee's left pinky and ring fingers were pinched, resulting in an amputation of the ring finger to the second knuckle.",0
"An employee was descending an A-frame ladder after filling gas in the back of a truck on a spray rig unit. The employee had one foot on the ground when his left foot got caught and he twisted and fell, resulting in a broken left femur.",1
"An employee was loading trash bags into the back of a garbage truck. The truck backed over him. He suffered eight cracked ribs, a collapsed lung, a lacerated liver, a broken knee, a broken ankle, a gash in the lower right leg, and spine injuries.",1
"A maintenance employee was servicing a piston cylinder when the rod and rod head came loose from the framework holding it. He and another maintenance employee were lifting the cylinder with a hoist and the cylinder head fell approximately 20-24"" and struck the employee's left ring finger, causing a fracture and a partial degloving. The employee was hospitalized and required surgery.",1
"While on a 6-foot rolling platform ladder, an employee was using a bandsaw to cut a section of piping. As the employee finished making a cut, the ladder tilted forward, then moved backward, before toppling over. The employee fell over the handrail of the platform and struck his ribs on the handrail of a nearby emergency exit staircase. The employee was hospitalized with four broken ribs and a punctured lung.",1
An employee was positioning a sheet of steel decking when they fell approximately 15 feet through a hole to the lower level. The employee sustained fractures to the head and spine.,1
"An employee was descending from a catwalk when they missed the step onto the ladder and fell approximately 21 feet to the ground, sustaining a fractured pelvis, a chipped spine, a concussion, and a laceration to the face.",1
"A lineman was in a bucket trying to pull the powerline when it got caught in a tree limb. The powerline then came in contact with an energized line, causing an employee on the ground that was in contact with the tail end of the line to receive an electrical shock/burn.",1
An employee was dumping scraps of sheet metal into a waste bin. He was retrieving some pieces of metal from the hopper when they lacerated his left index and middle fingers.,1
"An employee was troubleshooting a prototype poultry ventilation fan, trying to point out a loose bolt or vibration. His left pinky finger contacted the moving fan blade resulting in a revision amputation.",0
"While climbing up a ladder to clean an awning with a power washer, an employee fell approximately 10 feet to the ground. The employee sustained head trauma.",1
An employee was cleaning out a drain in the parking lot when they were struck by a car.,1
"While walking in the offstage area, an employee tripped over a coat rack and fractured her hip.",1
"Employees were unloading a tractor in order to dig up a drain line. One employee was using a pry bar to loosen the chains. The pry bar slipped and flew out of his hand, striking another employee on the hand. The employee sustained the amputation of his right middle fingertip.",0
A temporary employee was moving a 2' x 20' steel beam weighting between 2500 & 3000 lbs. using an overhead crane. The employee sat the steel beam on stands with chains and lifted one end of the beam with the crane when a chain caught and pulled the beam off the stands. One end of the beam landed on the employee's left foot and ankle causing crushing injuries including  broken bones that required hospitalization and surgery.,1
An employee was removing a ladder from the roof of a vehicle when the vehicle door closed on their hand. The employee sustained a fingertip amputation.,1
"An employee was moving a metal grate when his finger was pinched between the grate and an I-beam, amputating his left middle fingertip.",0
"An employee was helping secure bridge beams that were being set when a beam broke. Concrete pieces of the beam fell and one piece struck the employee, knocking him off the column he was standing on. The employee was wearing a harness and his lanyard deployed, curtailing the fall. The employee swung back into the column, resulting in a fractured rib and lacerated spleen.",1
"A baler door closed on an employee's finger, resulting in a fingertip amputation.",0
An employee was assisting a patient when they tripped and fell to the floor. The employee was hospitalized with a broken hip.,1
"An employee was helping to recover an RV that had gone over a highway embankment. A chain broke on the rotator wrecker and swung around behind the RV, wrapping around the employee's leg. This resulted in broken bones below the employee's right knee.",1
"An employee swept loose aluminum powder dust from an air filter into a dustpan and poured the dust into a 55-gallon water-filled sludge drum. Additional water was poured on top of the aluminum powder floating on the surface when the resulting hydrogen gas ignited, causing second-degree burns on the employee's right forearm and hand.",1
An employee was working in a trench making a pipe connection when the trench collapsed on the employee. The employee's leg was crushed.,1
An employee was riveting two pipes together using a rivet machine when the rivet hammer activated and crushed the employee's left index finger. The injury resulted in an amputation.,0
An employee accessed the top of a piece of equipment from a platform and had been removing a damaged motor from the equipment. The employee fell down the side of the 8-foot high piece of equipment and struck a rail and the concrete floor. The employee was hospitalized with three broken ribs and a contusion on the side of the head.,1
"An employee was removing a chain binder that was used to secure cargo to a vessel. While working to free the handle of the tension binder from the deck plate using the handle of another binder, the binder suddenly released and struck the employee on the left side of his face and on the right thumb. The employee sustained a fractured right thumb and a laceration on the left cheek.",1
An employee was loading product when their right arm became caught in the conveyor and was amputated at the shoulder.,0
An employee's arm was caught by a forklift when its parking mode deactivated and the employee was dragged by the arm. The employee suffered a fractured left arm and a fractured hip.,1
"After returning from a scheduled break, an employee was in the break room changing into their work uniform and fell onto the floor. The employee sustained a fractured hip and arm.",1
The employee was printing labels at the printing machine when the product shifted. The employee was adjusting the product and sustained an amputation to the fingertip.,0
"While pulling door decals off the door of a cooler, an employee fell backward off a 2-step ladder. The employee landed on the concrete floor and sustained fractures to the lower right leg and right wrist.",1
"An employee installed new control wiring for the emergency release button on a formic acid process. When the employee tested the new wiring, formic acid sprayed out of a secondary pipe and struck the employee causing chemical burns to the face, chest, right shoulder, and arm. The employee was hospitalized.",1
An employee was removing scrap pieces of board from a conveyor and sustained an amputation to the right pinky fingertip.,0
"While running wood through a jointer, an employee's right ring fingertip was partially amputated by the jointer's blade.",1
"An employee was using hot water to clean a vapor recovery line on a cargo tank trailer. As he removed the line, hot water sprayed his left foot, burning the top of the foot.",1
The injured employee was on a ladder retrieving a part when another employee bumped the ladder and the injured employee fell to the floor and broke broken a hip.,1
An employee was operating a pressure washer. A fitting failed and high-pressure water was injected into the employee's leg.,1
"An employee was welding the bottom of a chute on the underside of a bin. Hot material came through a small gap between a gate inside the bin and the chute, contacting the employee below. The employee received second and third burns to the neck.",1
An employee was climbing down an extension ladder when he lost his footing and fell feet first to the ground. The employee's ankles were injured.,1
A temporary employee was driving a pallet jack to a charging station when her leg was crushed between the pallet jack and the charging station platform.,1
"Two employees were moving gate valves from one pallet to another. A gate valve slipped and one of the employees reached out to catch it from falling and pinched his right middle finger between the falling valve and another valve, severing the fingertip.",0
An employee was using an impact torque wrench on a fluid end cap when the wrench spun and crushed the tip of his right middle finger.,1
"A delivery driver was getting ready to deliver food. While attaching a trailer to the truck, the employee's foot got caught on the hitch trailer. The employee was hospitalized with a broken ankle.",1
An employee was chopping basil with a knife and severed the tip of his left thumb.,0
An employee was clearing sawdust from a framework. The employee kicked a pile of sawdust next to a conveyor roller and the employee's pant leg was caught in the roller. The employee sustained two right leg fractures that required surgery.,1
An employee was moving sandbags when they became dizzy.,1
"An employee was loading OTRs into a trailer at the loading dock. As he was pushing an OTR into a truck, it veered off the left side of the ramp and tipped over onto the driver sign-in desk. The employee was holding the OTR on the side as it rolled off the dock plate and his ring finger was crushed between the OTR and a metal table resulting in a fingertip amputation.",0
An employee was setting up to cut pipe with a saw. A clamp actuated and pinched the employee's left index finger between the clamp and a pipe. The distal third of his left index finger was amputated.,0
"An employee was removing an electrical panel when an arc flash occurred. The employee sustained electrical burns to the face, neck, and arms.",1
"An employee was drilling holes in C-channel beams that were 16 feet long and weighed approximately 400 pounds. The employee placed three beams on saw horses. After drilling holes, he manually flipped them over. When the employee flipped the third beam it landed at an angle and fell off the saw horses and struck and fractured the employee's right leg and left ankle. The employee was hospitalized for surgery on his left ankle.",1
"An employee tripped while turning to walk away from a sink. She fell, suffering a broken femur.",1
"An employee was on a ladder nailing patter on top of a two-story house. The ladder slipped, causing the employee to fall and fracture their right hip and left foot.",1
An employee was driving an armored vehicle when it broke down. The employee inhaled smoke and was hospitalized.,1
"On April 8, 2021, an employee was operating a crane when its load shifted and struck the employee. The employee suffered a broken leg and was hospitalized.",1
A steel member was being transported by a material handling magnet. The magnet lost contact with the steel member surface while it was being transported to the staging area. The steel member fell and struck the injured employee's leg resulting in a lower leg fracture.,1
"A wall fell while being taken down. It struck an employee in the back of the leg, causing a laceration.",1
"On April 8, 2021, an employee was setting and securing the dock plate when she fell onto the concrete floor landing on her right side.",1
"An employee arrived at a location to shut some production wells. While walking through the location, the employee tripped on a 1-inch piece of pipe and fell to the ground on their right side. The employee sustained a fractured hip requiring hospitalization.",1
An employee was walking up the K-loader when they slipped and fell over the side of the K-loader to the ground below. The employee sustained a fractured right arm.,1
"An employee was trying to rotate a section of aluminum screen enclosure from a balcony next to overhead power lines. The aluminum frame made contact with a power line, and the employee suffered second- and third-degree burns to the hands and chest.",1
"While waiting next to a truck to load it with trash, an employee was stung by a bee. The employee's hand got infected and swelled, requiring hospitalization.",1
"An employee walked around the back of a brake press when they knocked over trays and then tripped over the trays, falling to the floor and resulting in a fractured left hip.",1
"An employee was walking through the production floor when she lost her balance and stepped between a transfer car and the transfer car pit wall, resulting in a horizontal scrape to the outside of her left calf.",1
"An employee was riding on the back of a trash truck when the truck hit a bump in the road, causing the employee to fall from the truck and hit his head on the pavement. The employee was hospitalized with a head injury/concussion.",1
An employee was escorting a forklift driver in the outside lawn and garden area. The employee fell to the ground while walking and was hospitalized with fractures to the right wrist and hip.,1
"An employee backed a trailer into an empty space, then got out of the truck. The truck rolled back and its door pinned the employee against the adjacent trailer. The employee suffered three broken ribs.",1
An employee was loading milk into the milk tanker from the silos. The employee noticed a leak on the valve stem and went to stop the leak by tapping it. The valve closed on his left ring fingertip and amputated it.,0
An employee was operating an electric pallet jack and turned toward a stationary object. The employee jumped from the pallet jack in order to avoid a collision and their right foot was caught between the pallet jack and a parking block.,1
"An employee was backing up a standup forklift when their left foot was crushed between the forklift and a rack, resulting in a fracture and lacerations.",1
"An employee was taking an empty two-wheeler back to a truck. The employee slipped on wet pavement and fell, suffering an abdominal pull that required surgery.",1
"An employee was on a stepladder by a press, clearing a jam from a conveyor. A robotic arm knocked him from the stepladder to the ground. He struck his head and suffered a broken wrist.",1
"An employee was pushing a welder on a dolly when the dolly hit a bump in the concrete and flipped up. The welder shifted, and the employee's right pinky finger was caught between the dolly and the welder. The finger was amputated. The employee was hospitalized and the finger was reattached.",1
"An employee was aligning a conveyor with a press used for laminating plywood. When the employee kicked the conveyor, his right foot was pulled into a chain and sprocket. The employee attempted to free his foot with his right hand which was also pulled into the chain and sprocket. The employee sustained the amputation of two toes on their right foot. The chain and sprocket were not guarded at the time of the incident.",1
"While prepping a push-boat to move to another location, employees filled both motors with 2-stroke oil and put the cowlings back on the motors. An employee went to start the motors. The port motor started but the starboard motor hesitated. The employee tried again; the starboard motor started up but fire shot out and fuel that leaked caught fire. One employee was hit by the flames, and sustained burns on the neck, left hand, and both legs.",1
"An employee was pulling parts to fulfill a customer order in the parts department. While utilizing a Work-Assist Vehicle (WAV) to pull two 89-lbs. axles, the remaining axles in inventory shifted. One axle rolled forward and struck the employee in the face. The employee sustained a fractured cheek bone.",1
"Employees were putting in the helical foundation to install a PTC tower when they hit rock and stopped work. An employee took the boom truck remote control and climbed onto the boom truck bed and proceeded to disconnect the foundation adapter plate from the helical foundation. The employee then lifted the boom to remove the helical foundation from compression and pushed the foundation over toward the ground at the back of the boom truck. At that time, the injured employee came around the back of the boom truck and was struck by the falling foundation, resulting in a fracture to the right foot and a tendon injury to the right knee.",1
"An employee was felling a large tree. As the tree fell, it contacted another large tree, causing that tree to become uprooted and fall. That tree then contacted a dead tree, causing a large section of the dead tree to break off. Pieces of the dead tree section struck the employee in the back, resulting in three fractured ribs.",1
An employee was servicing industrial manufacturing equipment. His left hand became caught in one of the mixer's paddles and his entire left arm was amputated.,1
"A bale of cardboard fell onto an employee, causing multiple fractures.",1
An employee was removing a wall brace when a telehandler tire caught the employee's jeans and pulled him down to the concrete floor. The tire then ran over the employee's left foot and crushed it.,1
"An employee was backing a stand-up electric pallet jack out of a trailer freezer. The employee's right leg was caught between the pallet jack and a pallet, causing a hairline fracture to the leg.",1
An employee was performing maintenance on a loader. While checking the tension of the alternator belt their fingers were caught in the belt. The employee sustained an amputation of the index and middle fingertips.,1
"An employee was about to move a vehicle that was exiting the car wash for drying and detailing. When the vehicle was started, it raced forward, crossing the property and then six lanes of traffic, and crashed into a structure across the street. The employee suffered a head injury and concussion when the air bags deployed.",1
"An employee was repairing a cylinder on a tractor with a backhoe. After pulling a lever, the employee was caught between the backhoe arm and a raise outrigger, resulting in a broken jaw.",1
"On April 8, 2021, an employee was walking on a warehouse floor when a forklift backed into him. He suffered foot and leg injuries and was hospitalized.",1
An employee was cutting material with a circular saw when his middle and ring fingers contacted the saw resulting in fingertip amputations.,0
An employee was cutting a strap on a breakdown unit. The employee fell backwards and suffered a broken left hip.,1
"An employee fell while skiing, suffering a broken right leg.",1
"An employee was following other employees out of a 53-foot trailer. He stepped on rollers and fell into the belly of the trailer, which was about 3 feet deep. He suffered three broken ribs, a collarbone fracture, and a brain bleed.",1
"An employee was climbing an extension ladder with his tools in a bucket. As he reached the top of the ladder and raised the bucket to the third floor, he fell from the ladder onto the decking of the second floor 15 feet below. He suffered a broken vertebra.",1
An employee fell off of a 6-foot ladder while working on the front elevation of a home. The employee suffered broken ribs.,1
"An employee was operating a stand-on mower next to a chain link fence and struck a fence post. The employee was thrown onto the mower's right control handle, resulting in an abdominal injury.",1
"An employee was moving pallets out of a dairy cooler. As the employee pulled a motorized pallet jack out from under a pallet, his leg was caught between the jack and the wall. He suffered a broken fibula.",1
An employee was stepping down from a machine when his knee gave out and he fell 22 inches to the floor below.,1
An employee was bitten by a patient while treating the patient. The employee suffered an amputation to a finger.,1
An employee was operating a zero-turn commercial lawn mower when they were thrown from the  mower and their left leg became caught in the rotating blade. The employee's left leg was amputated mid-calf.,0
"On April 9, 2021, an employee was assisting in a dumpster collection. His left index finger was crushed when the mechanical sweeper engaged.  He was hospitalized and had surgery on his finger.",1
An employee was cleaning a meat saw and amputated their right index fingertip.,1
"An employee was standing at the top of a belt loader, getting ready to load an airplane with luggage. The loader was energized, and the employee fell to the concrete about 6 feet 7 inches below. He suffered a laceration to the back of the head, as well as a C6-C7 anterior cervical discectomy and fusion (ACDF) surgery.",1
"An employee was pointing at the source of a squeaking sound on a hook-and-loop fastener dot application machine. Moving parts caught his left middle finger, causing a fingertip amputation.",0
"At 9:00 a.m. on April 9, 2021, an employee fell to the floor while walking down a hallway. He suffered a broken right humerus.",1
"An employee was tightening a flange on a hot water pipe. The hot water burst out of the pipe and sprayed him, burning his torso, abdomen, and thigh.",1
"On April 9, 2021, a 16-inch tire spontaneously released air after being mounted on a 16-inch rim, then taken off the mounting equipment. An employee was struck by the tire and the rim, suffering fractures to the left hand.",1
"An employee was driving a forklift inside a box truck. While adjusting the load, the employee's leg was pinned by the forklift, resulting in a leg fracture.",1
"An employee walked into a location in a tank containment dike where part of a grate had been removed, causing his right leg to sink in hot wash water up to his knee. The water filled his rubber boot and he suffered second- and third-degree burns below the knee.",1
An employee slipped and fell while descending a fixed ladder on a rail car. The employee suffered a broken left wrist and left leg.,1
"An employee was moving a 30-gallon poly drum containing a halon fire extinguisher. He opened the container to verify its contents. Once he unlatched the drum ring, the lid flew off of the drum and struck the left side of his face. He suffered a fracture to the left eyebrow and was hospitalized, requiring surgery.",1
"An employee was climbing down an extension ladder. The employee fell to the grass about 8 to 10 feet below, suffering a broken left elbow.",1
"An employee was unloading a trailer using a forklift. He left the forklift and removed a strap securing freight to the wall on a deck over other freight. One or more of the four beams running from one side of the trailer to the other failed, and the freight fell forward onto him. He suffered a broken fibula and tibia.",1
An employee was pulling in a line of shopping carts when his knee gave out and he fell on his left side. He reinjured a left femur fracture and was hospitalized for surgery.,1
"An employee was working inside a building on a fixed platform, feeding pipe upward through a hole to a roof. Ammonia leaked from a pipe about 15 feet away. The employee was hospitalized, suffering from a respiratory illness.",1
"A powered industrial truck backed into an employee, who suffered a broken pelvis with internal bleeding. The employee was hospitalized.",1
"At about 5:45 p.m. on April 10, 2021, a customer's child bumped into an employee in a store, causing the employee to bump into a box. Her ring fingernail was removed at the hospital.",1
"At about 6:45 a.m. on April 10, 2021, an employee was scraping down the inside of a mixing bowl when the mixer dough hook caught his index finger. He suffered a broken finger and a cut.",1
An employee was cleaning a roller on a manure belt. The employee's left arm was pinched between the belt and the roller and was broken.,1
"An employee was delivering an order to a customer. When he left his car to make the delivery, he was carjacked and then run over by his car. He suffered skin abrasions and a spinal injury.",1
"On April 10, 2021, an employee was observing a lawn mower that had an issue. The mower was engaged and ran over the employee's foot, lacerating it and severing a tendon. The employee was hospitalized.",1
"An employee was cutting a ham shank with a 6-inch curved knife. The knife slipped and struck his left arm, puncturing the bicep and causing a muscle injury.",1
"An employee was leaving a patient care room when she fell forward, landing on her arms. She suffered a fracture to the right arm between the shoulder and the elbow.",1
"An employee fell from a swivel chair to the floor, suffering injuries to the left hip, left outer thigh, and head.",1
"An employee was on horseback trying to catch a younger horse. His horse bucked him off and he fell to the ground, landing on his head. He suffered a neck fracture between two vertebrae.",1
"An employee was trying to fix a jam on a die press. The machine closed on his left hand, crushing, fracturing, and lacerating it. The employee's pinky finger was amputated. The machine was not locked out at the time.",0
"An employee was climbing up out of an area after inspecting a piece of equipment. When a looper table actuated, his left foot was caught and crushed between the table's mechanical stop and a mechanical block. Multiple toes were medically amputated.",0
"On April 10, 2021, an employee was using a leaf blower. He was assisting the operator of a riding lawn mower when the mower ran over his foot, its blade amputating multiple toes.",1
"Employees were pushing a cart loaded with 23-foot-long tubes off a trailer. The load came to a sudden stop due to an uneven dock leveling plate; some of the tubes fell onto an employee's right leg, causing multiple fractures.",1
"An employee was struck by a forklift. He fell to the ground and the forklift's tire caught his right hand/arm. He suffered an amputation to the arm, between the wrist and the elbow.",1
"An employee was installing grading on a 3-foot platform. He slipped off the platform and fell to the ground, suffering a broken right ankle.",1
An employee had just finished cleaning a ribbon mixer and was lifting himself up when a rotating mixer blade amputated his right index finger below the second knuckle.,1
"At 12:06 a.m. on April 10, 2021, an employee was preparing tortilla dough for a machine that routinely dropped dough onto a cast pan. While the employee was pulling out the cast pan, the machine's arm struck his hand. The employee was hospitalized, requiring surgery to alleviate pressure.",1
An employee was adding metal to bins in a chrome plating hot water bath. The employee fell into a 148-degree solution of 6 percent sulfuric acid up to the waist; the employee suffered second-degree burns to the legs and was hospitalized.,1
"	At 3:15 p.m. on April 11, 2021, a dock worker was driving an electric pallet jack through a roll-up door when the door came down and broke the employee's left thumb. The employee was hospitalized.",1
"An employee was operating an electric pallet jack. The jack went out of control during a turn and ran over the employee's right leg, breaking the ankle. The employee was hospitalized.",1
"A temporary employee tried to cycle a piece of machinery, but it did not complete a cycle. The employee was troubleshooting the issue when the machinery abruptly started to move and crushed his index finger. The finger was medically amputated.",0
"An employee was attempting to remove a jam in a machine. Once the jam was removed, the machine's sock fitting cylinder continued its motion and crushed the employee's right index finger. The finger was medically amputated.",0
"An employee was moving a triple pallet truck near a concrete curb in a warehouse. When the truck reversed, it pinned the employee's right leg against the curb. The employee suffered fractures to the lower leg and was hospitalized, requiring surgery.",1
"An employee was traveling on a dock lift when it struck an empty pallet. The employee was thrown from the lift, which kept rolling and pinned his left foot. He suffered a partial amputation to a toe.",1
An employee tripped over a case of water that was sitting on the floor between two store check-out lanes. She fell to the floor and suffered a broken left hip.,1
An employee was sorting non-machinable mail into dispatch cages when she tripped on a bundle of magazines that had fallen to the floor. The employee fell to the ground and suffered a left hip bone fracture.,1
"While navigating a hand cart, an employee's right leg was caught under the cart. The employee tripped and fell to the floor, suffering a broken left leg/knee.",1
"An employee was walking a till to a register when she slipped on a greeting card and fell, suffering a broken pelvis. She was hospitalized.",1
An employee was walking through a landscape bed (bushes and mulch) to enter a building. The employee tripped on a curb/lip at the edge of a sidewalk and fell. The employee sustained face/forehead and knee injuries.,1
"The employee was walking down the steps while delivering mail when they lost their footing and fell down the steps onto a cement walkway, resulting in a torn calf muscle on the left leg.",1
An employee was backing up a forklift. The employee's left thumb was caught between the forklift's overhead guard and a partially fabricated tank made of thin-gauge steel. The thumb tip was amputated.,1
An employee was setting up a well rig when the counterweights spun free and caught his fingers. He suffered an amputation to the right ring finger at the top knuckle and an amputation to the right little finger at the tip.,0
An employee was cleaning a water vessel that contained waste including hydrogen cyanide. The employee was exposed to the hydrogen cyanide and became disoriented.,1
"An employee was operating a stand-up forklift when it backed into the raised forks of another, parked forklift. The employee suffered lacerations to the back of his left thigh.",1
"An employee was clearing a steel plate trapped under a palletized coil on a conveyor. The coil was reversed while the employee's hand was on the steel plate. The employee's fingers were caught in the resulting pinch point, causing amputations to the index and middle fingertips.",0
"An employee was adjusting steel strips in a bandsaw. He activated the hydraulic clamp to hold the material in place, and the clamp amputated the tip of his right thumb.",0
"At 4:10 p.m. on April 12, 2021, an employee was preparing cars at the beginning of a car wash line. One of the cars accelerated and pinned the employee against another car. The employee suffered a broken left leg and was hospitalized.",1
An employee was assembling a pallet using a screw gun. The gun double-bounced and shot a fastener through the base of the employee's left hand and into the wrist.,1
An employee was cleaning inside the CNC machine when it started and the CNC arm struck the employee. The employee suffered a broken collar bone and a deep scalp laceration. The machine's interlock device was not working at the time.,1
"An employee was painting on top of mobile scaffold when they fell six feet, resulting in broken heels.",1
"At 4:45 p.m. on April 12, 2021, an employee was preparing to pressure-wash an ash hopper. After he was set up, the wand slipped out of his hand and the trigger deployed when it hit the ground. Pressurized water struck his left little finger. He was hospitalized.",1
"An employee tripped while standing up from a chair, fell, and suffered a broken left hip.",1
An employee was driving a reach truck when it hit a guardrail. The employee suffered leg fractures.,1
An employee slipped and fell on a wet floor while walking into a men's room to clean it. The employee suffered a broken right leg.,1
"An employee slipped on a puddle of water on a cafeteria floor, fell to the floor, and broke her kneecap. She was hospitalized, requiring surgery.",1
The doors on an oven blew open and struck an employee in the head. The employee developed a blood clot in the head.,1
A bus driver fell into a railing while walking up the steps into a bus. The driver suffered eight broken ribs.,1
"An employee was standing outside a machine, inspecting a basket malfunction, when the counterbalance weight fell from the machine onto the employee's right foot. The foot was broken.",1
"An employee was unloading a 32-inch-wide scissor lift from a trailer. A spotter told the employee to stop the lift because it was not completely lined up with the ramp. The employee stopped the lift, but it tipped and fell to the ground with the employee inside it. The employee suffered a broken left femur.",1
An employee jumped about 6 feet into a gravel area and broke his leg. He was hospitalized.,1
An employee had an asthma attack after entering a patient room.,1
"A technician was inspecting the belts on a machine when it started unexpectedly, catching his left index finger in the belts and resulting in an amputation at the first joint.",0
An employee was working with a metal shearing machine. The machine partially amputated the employee's left ring finger.,0
"An employee's arm was sucked into the hose of a sand vacuum. The employee suffered bruising and abrasions and was hospitalized, requiring shots and IV treatment.",1
"An employee was loading a part into a gang mill. When the clamping mechanism was activated, it caught his right index finger, causing the amputation of the fingertip.",0
"On April 12, 2021, an employee was operating a jointer machine. The employee suffered a partial amputation to the left index finger while removing the wood panels from the machine.",1
"An employee was operating a road grader. The grader stopped and the employee dismounted to check it. The grader then began moving. The employee chased it down and jumped up to stop it, but fell under it. The employee suffered a broken right leg.",1
"An employee was working in an elevator that was being built. While stepping from the floor of the elevator (which was raised 4 feet off the floor on sawhorses) to an 8-foot fiberglass ladder, he missed his rung and fell backwards, landing on his shoulder on the floor. He suffered a shoulder injury.",1
An employee lost consciousness due to heat exposure after moving refrigerant to the roof of a building.,1
"An employee was stripping concrete forms from a 10-foot step ladder. He lost his balance and fell 5 to 6 feet to the concrete floor below, landing on his feet and then his knees. He suffered injuries to both knees and was hospitalized.",1
"An employee was sorting steers in an alley. The employee's right ring and little fingers were crushed between the gate and the steer, and the employee's right thumb was lacerated. The ring and little fingers were medically amputated at the first knuckle below the nail.",0
An employee suffered a lower back strain while standing up from a work stool.,1
"An employee removed a cap from a gravity-fed water line to use water to clean the line. Hot water from the line struck the employee's left forearm, causing second-degree burns. The employee was hospitalized.",1
"On April 12, 2020, an employee tripped on a rock and fell to the floor, breaking her wrist. She was hospitalized.",1
"An employee was pulling stainless expanded metal from a rack. The metal lacerated the employee's right hand, cutting through an artery and a tendon. The employee was hospitalized and underwent surgery.",1
"An employee was moving product from a skid. The employee tripped over banding on the concrete and floor and fell, suffering a broken hip.",1
"An employee was using a plasma cutter to cut the top of a barrel that had been filled with flammable liquid. The barrel, with residual antifreeze under pressure, exploded. The employee suffered a jaw fracture and a brain bleed.",1
"On April 12, 2021, an employee was on a ladder, attempting to throw a pallet into a dumpster. He fell to the ground 7 feet below and suffered a compound fracture to the left leg. He was hospitalized.",1
An employee was performing maintenance on the RF generator portion of a beam press. The employee contacted a live electrical conductor and electricity entered the employee's flashlight and exited the employee's foot. The employee was hospitalized for electric shock.,1
An employee was participating in training exercises and was hospitalized for a muscle injury.,1
"A metal tote was being carried on a forklift. The tote shifted forward during a turn, slid off the forks, and struck an employee standing below. The employee suffered a fractured pelvis and a fractured knee.",1
"An employee was changing safety filters when a filter that was under pressure sprayed hot juice onto the employee, resulting in burns to the neck and back.",1
An employee was working underneath a vehicle on a car lift when the car lift lowered onto the employee and fractured their pelvis.,1
An employee was helping the operator of an assembly stand. The machine was engaged and the stand amputated the tip of the employee's left index finger.,0
"An employee was power-tapping a hole in a pump stuffing/packing box using a vertical knee mill. The employee was wiping away metal debris with his gloved hand when the glove became entangled on the rotating tap and pulled the employee's fingers around, cutting through the glove. The employee's left pinky finger was amputated.",0
"An employee was using a forklift to load empty pallets onto a trailer. His forklift struck another lift, parked nearby. He suffered a laceration to the right lower leg that required hospitalization and stitches.",1
"An employee was preparing to move a crate when their left leg became caught between a truck bed and a dock, resulting in an injury that required hospitalization.",1
"An employee was checking for an irrigation leak near a retaining wall when the employee slipped and fell from the retaining wall to the concrete below, resulting in a broken ankle.",1
An employee was using a mixing machine. The employee was caught in the mixer and suffered broken bones and lacerations.,1
"An employee was walking across a roof when he fell through a section of weak decking and landed on the concrete floor about 30 feet below. He suffered injuries to the wrist, hip, and pelvis.",1
An employee was operating a chop saw. The sawblade cut off the tip of the employee's right thumb.,0
"An employee was roping a steer from horseback. The steer ran in front of the employee's horse, which tripped and fell. The employee's right leg was pinned between the horse and the hard-packed ground. The employee suffered a broken fibula and broken metacarpals.",1
An employee was cutting a piece of baseboard with a table saw and lacerated their fingers. The saw was not guarded at the time of the incident.,1
"An employee was fixing a jam in a machine when the machine caught her glove and pulled in her hand, resulting in amputation of the left middle finger.",1
An employee was preparing merchandise for delivery when the employee stepped backward and fell 4 feet from the back of the truck to the ground. The employee hyperextended both knees tearing and straining muscles and ligaments.,1
"On April 13, 2021, an employee was operating a walkie rider when their leg was pinned between the walkie rider and a pallet, resulting in a fractured right tibia.",1
An employee was performing forestry-related burning operations. He had one burn torch in his hand and another attached to his fire line pack. The second torch failed; fuel got free of the drip torch and was ignited by the open flames. The employee suffered second- and third-degree burns to the backs of his legs.,1
"An employee entered an enclosed, automated, heated cleaning line to look for missing parts. He stepped on a grate, which slipped, causing his left leg to slip into a tank. He suffered burns and was hospitalized.",1
A cashier was shot during an attempted robbery.,1
"An employee exited an HVAC mechanical room in an attic, closed the door to access an extension ladder, and fell through a suspended ceiling tile. He landed on the floor below and suffered fractures to facial bones and ribs.",1
The injured employee was setting up a hydraulic brake press for production and was running a test piece when the foot pedal was pressed and the employee's left hand was cut and crushed.,1
An employee was stepping off a fixed ladder. She fell at the fourth step and broke her left ankle.,1
"An employee was taping boxes with a manual taper. The employee reached into the taping mechanism to pull a piece of tape off the machine. The taping mechanism cycled, causing the tape blade to lacerate and partially amputate the tip of the employee's right index finger and fingernail.",0
"A fork truck reversed and backed onto an employee's foot. The employee suffered foot and leg injuries including a fracture, swelling, and tissue damage and was hospitalized.",1
"An employee was spraying foam on the ceiling of a room above a garage. The employee fell through a floor opening, through the garage, and down to a basement floor about 20 feet below. The employee suffered pelvis injuries and was hospitalized.",1
"An employee was installing v-belts on a set of rolls on a rolling table that was isolated at the time. The employee was using a pipe wrench to manually turn the rolls so that the v-belt could be installed when his left finger became caught in the nip point of the belt and pulley, resulting in a fingertip amputation.",0
"A wildland firefighter was physically training for the job when he started feeling aches in the shoulder area. Later that evening he felt extreme fatigue, and body aches in the shoulder area and legs. The following morning, the employee was hospitalized with a muscular injury.",1
"An employee and a co-worker were troubleshooting a printing press when a part inside the machine came down on the employee's right index fingertip, resulting in an amputation at the cuticle that required surgery to reattach.",0
"On April 14, 2021, an employee was using a manual pallet jack when she saw a stand-up pallet jack turning into her aisle. She stepped back, tripped over her jack, and fell to the floor. She suffered a broken right wrist and was hospitalized.",1
An employee slipped and fell while walking down stairs. She suffered a head laceration and a broken shoulder/arm.,1
"On April 14, 2021, an employee was inspecting a sowing machine that was making a loud noise and amputated their index fingertip.",0
"On April 14, 2021, at 7:30 AM, an employee was throwing a 78-pound casting into a wire basket when the flashing on the casting caught their leather glove and pinched their right middle finger between the two castings, resulting in an amputation.",0
"An employee was removing a hose after unloading sodium hydroxide. The hose had residual pressure in it and sprayed the employee in the face, resulting in chemical burns to the eyes.",1
An employee was operating a brake press when his right hand was caught in the point of operation. The employee sustained a compound fracture to the right hand.,1
"An employee was riding on the side of a forklift while another employee operated it. The employee stepped off the forklift and their right foot was run over by the forklift's tire, resulting in a broken foot.",1
"A siding worker was climbing up a ladder and fell approximately 6-10 feet onto a concrete slab. The employee sustained a fractured wrist, the loss of a front tooth, a swollen eye, and a broken lip.",1
An employee was walking down an aisle when they were struck by a metal stool that a co-worker was moving. The employee fell to the ground and suffered a fractured femur.,1
"An employee was inserting a metal wedge between a tundish cart and a stopper to prevent movement of the cart. The wedge twisted and the employee's fingers got caught between the cart and the stopper, resulting in a partial amputation of the left ring finger.",1
"An employee was standing on a step stool placing labels on shelves. She fell from the stool to the ground, landing on her left side and suffering a broken hip.",1
An employee was removing a part off a conveyor when their finger was caught between the conveyor belt and a metal part resulting in a fracture and amputation of the left ring fingertip.,0
"An employee was walking with a pipe in his hand when he tripped and fell. The employee's finger was smashed between the pipe and the floor, resulting in the detachment of their fingernail that required surgery and hospitalization to be reattached.",1
"An employee was part of a crew installing new electrical wiring. The employee's right hand came into contact with an energized part while his left hand was touching grounded hardware. He suffered electrical burns to three fingers on the right hand, as well as his left thumb and index finger.",1
"An employee was placing a metal shelf (39 x 95 inches) on a storage rack. He attempted to straighten the shelf and center it on its support. The shelf slipped off the support and pinched his wrists against a cross brace. The employee sustained artery damage at the left wrist, requiring surgery.",1
"An employee was driving a powered industrial truck when the vehicle made a sudden right turn and crashed through a dock door and landed in the parking lot. The employee sustained a dislocated right shoulder, a broken ankle, and head lacerations.",1
"An employee was struck by a piece of material ejected from a machine, resulting in a laceration to the arm as well as a laceration and bruising to the liver.",1
"An employee was setting up a line and noticed that a polytube above a dust hopper feeder had pulled into the transition piece. He removed the lid from the feeder and was reaching in to pull the polytube out when the valve closed on the ends of his index and middle fingers, amputating the pads of his fingers.",1
An employee was performing surveying work on site and was bitten by a rattlesnake.,1
An employee was inspecting a commercial roof when they fell approximately 10 feet to the ground and fractured their humerus.,1
"An employee had been engaged in stocking activities. While descending a rolling platform ladder, the employee fell backward to the ground. The employee was hospitalized, having sustained a fractured right clavicle/scapula, a hemorrhage, a vertebra compression fracture, and a seizure.",1
"An employee installed a nitrogen supply line containing a particulate filter, pressure gauge, and pressure relief valve for a dual gas inlet gas booster system. When the employee pressurized the supply line, the particulate filter failed, causing the quick-disconnect metal bowl guard to become airborne and strike the employee's left pinky and ring fingers, resulting in broken bones.",1
"An employee was moving debris with a bulldozer. A metal bar flew up and came through the bulldozer's right-side window, lacerating the employee's head.",1
"An employee fell off a ladder while repairing a drop line. The employee landed on blacktop and suffered hip and skull fractures, a sprained left arm, and a gash over an eye.",1
An employee was exiting the top of a manufactured home to a catwalk when they fell from the top of the home onto the rail of the catwalk. The employee suffered a broken right humerus and dislocated his right shoulder.,1
"An employee was hanging clothes on a rack. She turned and her left leg gave out, causing her to fall to the floor and break her left hip. She was hospitalized.",1
"On April 15, 2021, an employee was removing rust from the spindle of a lathe using an emery cloth when their glove become entangled in the back chuck, resulting in a partial degloving of the right middle finger and complete amputation of the right ring and pinky fingers.",0
"An employee tripped while walking out of a building and fell forward into a door. The employee suffered facial injuries, a dislocated shoulder, and a broken foot.",1
"While treating a backyard, an employee was bitten on the left index finger by a coral snake.",1
"An employee stepped out of a post office vehicle to deliver a parcel to a residence and twisted their ankle, resulting in a fall and an ankle fracture that required hospitalization.",1
"On April 15, 2021, an employee conducted a test run of a new bagging machine when one of the bags got hung up in the bagging compartment. The employee attempted to unjam the machine when his left index finger became caught between the cutter and a flat piece of metal at the base. The employee suffered the amputation of his left index finger tip without bone loss.",0
An employee was traveling to a client's house when they were robbed and shot in the back of the leg and in the right hand. The employee was hospitalized.,1
"At about 9:00 a.m., an employee stepped out of a waste management truck to service recycling totes. The truck's right front tire ran over his right foot, breaking his ankle.",1
An employee felt pain in their lower back and leg after handling a patient.,1
"While performing a medical examination on a patient, an employee stood up and struck their head on a hanging cabinet, resulting in paresthesia related to a head injury. The employee was hospitalized.",1
"An employee was securing a water blaster in its stow position when the equipment shifted, catching the employee's finger between the locking bar and the equipment. The employee suffered a fingertip amputation on the left hand and was hospitalized.",1
"An employee slipped and hit a vat of hot oil/grease, which burned his arm, chest, and torso.",1
"An employee was installing facia from a boom lift when they fell out of the lift approximately 20 feet to the ground below, resulting in fractures to their ribs and pelvis.",1
"A temporary employee was operating a lift to move pallets to a staging area for shipment when her hand became trapped between the racking system and the lift handle, resulting in a fingertip amputation.",1
An employee was walking to lunch. The employee used the elevator to transit from their office down to the break area. The employee tripped and fell to the floor. The fall resulted in injury to their hip.,1
"An employee and a co-worker were loosening nuts and bolts on a 24-inch, 300-pound flange with hydraulic torque equipment and a reaction arm. The hydraulic torque equipment was not functioning due to pump issues. The co-worker went to inspect it when the pump kicked on and engaged the torquing equipment. The torquing equipment moved the reaction arm, which struck the employee's right-hand index finger, resulting in a fingertip amputation.",0
"An employee was remote-operating a crane at about midnight. A steel beam fell and hit him in the head, knocking him into something hot. He suffered a concussion, a wound on the back of the head that required staples, and burns.",1
"An employee was closing the door of the box truck when the pull handle broke, causing him to fall to the ground and break a bone in his lower leg that required hospitalization.",1
"An employee was servicing a machine when it started and the base plate struck the employee, resulting in a 3-centimeter laceration to the right side of their neck.",1
"An employee was working as a field service representative for a grocery store. The employee slipped on a wet floor in the grocery store and fell, fracturing her tailbone.",1
"An employee was training a horse. While riding, the horse stopped and hunched its back up while the employee was coming down onto the back of the saddle. The force resulted in a fractured pelvis and internal bleeding.",1
An employee was wrapping ductwork with insulation in an area where wires were hanging out of an existing conduit. The employee bumped the wires and the wire nut fell off which caused the employee to sustain an electric shock and second degree burns to the right arm.,1
"An employee was operating a two-color large image pad printer. The working table caught her left little finger as it slid back and forth, pinching it against the open rail. The fingertip was amputated.",0
"On April 16, 2021, at approximately 1:20 a.m., an employee was installing a new emergency/parking brake on a compact wheel loader equipped with a pallet fork attachment. While the employee was under the arms and pallet fork attachment of the wheel loader, the hydraulic cable was released causing hydraulic oil and pressure to escape. The arms and pallet fork attachment lowered and pinned the employee's left arm and leg between the pallet fork attachment and the ground. The employee's lower left arm and wrist were crushed. The employee also sustained broken bones in lower left leg and multiple broken vertebrae in lower back.",1
An employee was using a bone saw to cut meat when the saw amputated the employee's right thumb.,1
"On April 16, 2021, an employee slipped on an oily floor while getting up from her desk. She landed on the floor, suffered a fracture to a thoracic vertebra, and was hospitalized.",1
"An employee was performing maintenance on a skid steer while standing in front of it. The seat fell forward and hit a control lever moving the skid steer forward. The skid steer caught the employee's leg and pants, knocked him down, and rolled over him causing pulmonary contusions and a fractured pelvis.",1
"An employee was trying to unclog a weight scale bender when a machine door closed on his left middle finger, causing a partial amputation to the finger.",0
"An employee was setting up adsorbents near an excavator. The excavator's hoist cylinder casing struck the employee, who suffered broken ribs, a broken collarbone, and a head laceration.",1
"An employee was trying to move a barrel of liquid. He slipped and fell back onto the ground, breaking his left hip.",1
"An employee was doing repair/maintenance work under a utility vehicle. A chair fell onto the vehicle's controls, and the vehicle ran over the left side of the employee's body, crushing it.",1
An employee was sweeping around his area and putting trash into the trash can. The employee was picking up the trash by hand when a piece of plastic struck his left eye.,1
An employee was installing gutters from an aerial lift. The employee fell 14 feet to the ground and was hospitalized with a fractured right wrist and a contusion to the ribs.,1
An employee from Tractor and Equipment Company was standing on the side of a sewer pipe trench at a customer worksite. The ground caved in. The employee fell head-first into the trench and was buried up to his feet. The employee was suffocated by the soil and lost consciousness. The employee was hospitalized for a concussion and fractures.,1
An employee was re-threading a paper converting machine at the embossing roller area. Their left hand became caught between the steel embossing roller and a rubber roller. The employee's left index finger was amputated.,1
An employee was about pack corn when his left ring finger was caught between the corn machine and the part of the machine that held boxes in place. His fingertip was amputated.,0
An employee was trying to unjam waste paper in a paper slitter. The slicer blade amputated the employee's right index fingertip.,0
"An employee was unloading freight from a truck. The pallet holding the freight slid and the lift gate came down on the employee's left foot, breaking the foot and the ankle.",1
"Material was being transferred from one bag to another using a forklift. One of the forklifts moved as an employee reached to open a bag further, and the employee's right ring finger was caught between the mast of one forklift and the tine of the other. The finger was amputated at the top knuckle.",0
"The injured employee went over to assist another employee with a load of steel pieces that were being lifting by a crane. The load was approximately 3 feet off the ground when a piece of steel fell, striking and fracturing the injured employee's left foot.",1
"An employee was working on the replacement of a metal roof when he tripped over a gutter on the flat roof and fell through the plastic cover of a skylight landing 14.5 feet below on the concrete floor. The employee was hospitalized with fractures to a hip, the nose, and both wrists.",1
An employee was helping to get bottle spray trigger caps moving through the orienter machine when his right ring fingertip got caught between two spinning belts. The employee sustained an amputation to his finger.,0
"An employee was crossing from one side of a vessel to the other. He tripped and fell from the roof of a catwalk, landing on a shipping container 15 feet below and suffering a broken left femur.",1
An employee got off his reach truck. A moving cherry picker ran over his foot causing three broken toes. The employee was hospitalized.,1
An employee was cutting meat using a bandsaw. The saw partially amputated the employee's index and middle fingers.,1
"An employee was walking around a desk. The desk caught her right foot and she fell to the floor, suffering a broken left femur.",1
"An employee was moving materials on a mezzanine when he lost balance and leaned on the railing, which failed, and then fell approximately 8.5 feet to the ground floor. The employee sustained two broken wrists, a broken rib, and a head laceration.",1
"An employee was in front of a table bender rebar machine, bending rebar. The employee's left middle fingertip was caught in a hole in the rotating top. The fingertip was nicked, resulting in an amputation.",0
"An employee was on top of a flatbed truck. The employee slipped and fell to the ground, suffering a broken wrist, eye socket, and ribs.",1
"While cutting into cow hide with a knife, an employee's knife got stuck and then slipped, causing a laceration to their upper left arm.",1
"While leaving a client's home, an employee slipped on snow-covered stairs and fell sustaining a broken leg. The employee was hospitalized.",1
"While returning from her lunch break, an employee tripped and fell onto a metal track system that protrudes 10 inches from the floor. The employee sustained a fractured right humerus.",1
An employee was lancing a ladle when the lance pipe became stuck to the ladle opening. The employee then pulled on the pipe. The pipe detached from the lance and liquid steel poured out of the pipe and struck the employee's gloved right hand causing second degree burns to the palm and wrist.,1
"On April 17, 2021, a maintenance employee completed greasing the shaker screen chip belt. The employee then stepped down onto the belt with their left foot, slipped on rainwater, and landed on their right leg fracturing it.",1
An employee was loading watermelon onto a bus. He fainted due to heat stress and fell to the ground.,1
"On April 17, 2021, an employee was walking when they tripped and fell on the ground, sustaining a broken hip. The employee was hospitalized.",1
"An employee was pushing a bread rack on wheels. The rack began to roll more quickly than the employee was moving, and the employee fell to the concrete floor. He suffered a broken left hip and was hospitalized, requiring surgery.",1
An employee developed heat stress and a muscle injury resulting in hospitalization.,1
"A nurse trainee was sitting on a couch, working with a patient. A child pushed her off the couch and she fell to the floor, breaking her hip.",1
An employee was moving steel beams to the ground when his hand got caught between two beams resulting in broken fingers.,1
An employee was troubleshooting and oiling a box strapper machine. The employee's left thumb was caught between the machine's chain and sprocket and was amputated.,0
"On April 17, 2021, an employee tripped on an apron string and fell to the floor, suffering a broken left hip. She was hospitalized.",1
"An employee was climbing a ladder up to the roof of a single-story house. The ladder slid out from the employee, who fell to the concrete driveway about 8 feet below. He suffered a broken leg.",1
An employee was preparing to unload the contents of a tanker. He climbed the tanker ladder to cut off the seal and loosen wing nuts to allow the tanker to pump off. His hand slipped and he fell 8 to 10 feet to the ground and sustained a fractured left arm and three broken left ribs. Has was hospitalized and had surgery.,1
An employee was cutting croutons and amputated his left index fingertip.,0
"An employee was receiving shopping carts in a parking lot. A customer's car struck the employee, who suffered a broken ankle and was hospitalized.",1
"On April 18, 2021, a maintenance employee was pushing a rail track switch lever to move the track so that an amusement park train could continue on its way. The switch was blocked, and when he gave it a harder push, his hands slipped off it. The lever hit his lower abdomen and ruptured part of his small intestine. He was hospitalized.",1
An employee was driving a wide loader when it was struck by a baggage tractor. The employee lost consciousness.,1
"An employee was in a freezer when a forklift came through the door and struck her, lacerating her right leg. She was hospitalized.",1
An employee was standing on a box to reach an item on a shelf. The box tipped and the employee fell to the ground. The employee was hospitalized with a broken arm.,1
An employee was cleaning a 12-foot steel bar on a rack. He was trying to keep the bar from rolling off the rack when his thumb was caught between the bar and the rack. The tip of his thumb and part of the thumbnail were crushed and amputated.,1
"An employee was working on a water main. A vehicle entered the work zone to avoid being hit by another vehicle and struck the employee, who suffered broken legs and a head injury. The employee was hospitalized.",1
A maintenance technician was setting up a box binding machine for the next day. He came in contact with a timing belt and his right index fingertip was amputated.,0
"An employee was unloading merchandise. A pallet jack took a sharp turn next to him, and a load of frozen food tipped off the jack onto him. He suffered bruises to the back and legs, as well as a closed head injury.",1
"An employee climbed onto the back of a truck to start a generator, slipped, and fell to the ground, about 4 1/2 feet below. The employee suffered a broken right ankle.",1
"An employee tripped over a case of water and fell, resulting in hospitalization for a hematoma to the leg.",1
"An employee was bitten by insects on the right forearm, neck, and back during a late-night ambulance shift on April 19, 2021. The forearm bites resulted in cellulitis, and the employee was hospitalized.",1
"An employee was sitting in the cab of a truck that was backing up. When the truck stopped, the employee stepped out of the truck and the truck pulled forward, running over his foot. The employee required surgery for an injury to the foot.",1
An employee was getting down from the back of a scrap tire trailer. The employee grabbed the mast of a forklift just as the mast was engaged; the employee's finger was caught between the mast's telescoping sections. The employee's left ring fingertip was amputated.,0
An employee slipped in front of a fryer station and suffered a broken femur.,1
"An employee was working on a balcony. The ladder slipped and the employee fell to the ground 10-11 feet below, suffering hip and wrist fractures.",1
An employee was operating a reach lift. The employee's lower left leg was crushed between the reach lift and metal shelving.,1
"An employee was unloading pre-cast concrete from his tractor trailer. He fell from the truck bed to the ground, landing on his back and hitting his head. He suffered a contusion to the back, as well as a concussion.",1
An employee was working on a window regulator when the mechanism amputated the employee's left index finger.,0
"An employee was moving a pallet. When he swung the pallet to the floor, a protruding nail on the pallet cut his left forearm and hand. He suffered a broken left wrist.",1
"An employee was on a step ladder changing a light fixture. While descending the step ladder, he slipped and fell to the ground. The employee was hospitalized with a broken hip.",1
"An employee was fueling a mobile drill rig. When lifted, the drill boom contacted an overhead powerline. The employee was shocked, suffering a small pinhole burn.",1
"An employee fell while cutting grass and the lawn mower ran over his left foot, amputating the big toe and part of the second toe.",1
"An employee was unloading an old pallet jack. The tip of a finger on the employee's right hand was trapped and pinched in the jack's mechanism, then amputated.",0
An employee was operating a circular saw to cut wooden stakes when the saw hit a knot in the wood and kicked back in the direction of the employee. The employee sustained an amputation to his left pinky finger and lacerations to his palm and pointer finger.,0
"An employee was troubleshooting a sheet alignment issue on a trim press. The employee's glove was caught on a spline shaft, and the employee's left thumb was injured. The employee was hospitalized and the thumb was amputated.",1
"An employee was exiting a scaffold system into the general construction area when a co-worker who was operating a rough terrain forklift in reverse ran over the employee's foot, resulting in a broken toe, a dislocated toe, and cuts and bruises. The employee was hospitalized for surgery.",1
"An employee was placing elbow spacers between 4-inch by 4-inch, 40-foot-long billets. The tips of the employee's left pinky and ring fingers were crushed between an elbow and a billet, causing fingertip amputations.",1
An employee was struck by a forklift in a warehouse. Both of the employee's feet were broken.,1
"An employee fell out of the cargo area of his delivery truck, landing on the ground and suffering fractures to the scapula and lower back, as well as a partially collapsed lung.",1
"An employee was removing a coupon from a machine. The machine's jaws closed on his right middle finger, amputating the fingertip.",1
"An employee was operating a shear. The employee's right index finger was caught in the shear as the employee adjusted metal, causing the amputation of 1 1/2 inches of the fingertip.",0
"An employee was driving an off-road utility vehicle on a blacktop road. The employee moved to the gravel along the side of the road, then attempted to get back onto the blacktop road, and the vehicle turned over. The employee sustained a broken left ankle, injuries to his left leg, and road rash on his back.",1
"An employee slipped and fell from a fixed ladder, landing about 6 below and fracturing a bone in his lower leg.",1
"An employee was using an overhead gantry crane to change the battery in a forklift. The load tipped and the hook gave way, causing the battery to fall and strike the employee's left foot. The employee suffered a compound fracture to the big toe.",1
"An employee was troubleshooting a tractor engine. The employee's hand slipped into the turbo intake, and the tip of his left little finger was amputated at the first joint.",1
"While hanging supplies on a wall display, an employee stepped back and her flip-flop hit the corner of a box and she fell onto the floor. The employee broke her left humerus.",1
"An employee was using a grinder to clean a metal casting. The casting fell off the table and struck the employee's foot, fracturing it.",1
"An employee was traveling on a three-wheeled electric cart. While turning a corner, the employee grazed his leg on a steel guardrail, resulting in a deep laceration to his calf.",1
"An employee was preparing to lift an HVAC unit with a duct lift. The duct lift malfunctioned and its handle struck the employee in the head, possibly fracturing the employee's skull.",1
An employee was installing neoprene vibration dampeners under an air handling unit. The unit had been lifted about 1/2 inch off a concrete slab. It slipped off the lifting mechanism and crushed the employee's fingertip.,1
"An employee was installing a water main pipe when he became pinched between the excavator bucket and the trench box, resulting in fractured ribs that required hospitalization.",1
"At 3:55 p.m. on April 20, 2021, an employee fell down an elevator shaft from the second-floor level in a residence under construction. The employee suffered lower leg injuries and was hospitalized.",1
"On April 20, 2021, an employee was exposed to a chemical, possibly carbon monoxide, in a paint booth. The employee was hospitalized.",1
"An employee was climbing a ladder to reach the cab of a container loader. He slipped and fell to the ground, suffering a broken ankle and heel.",1
"An employee was hooking up a chain sling to lift concrete catch basin risers. He was holding the chain when the sling tightened, and the tip of his left little finger was caught between the chain and a concrete riser. The fingertip was amputated.",0
An employee was walking into a building when she slipped on snow melt and fell to the ground. She suffered a broken hip.,1
"A ranch employee's gun accidentally discharged, shooting the employee in the foot and knee.",1
"Two employees were attempting to remove a metal box from the outside of a building. On employee cut the top two bolts holding the box to the building, so that the bottom two box could act as a fulcrum as the box fell. The other employee was walking the box down, hand over hand, when it fell. Its top left corner struck him in the head, neck, and right shoulder, and he was briefly pinned under the box. He was hospitalized.",1
An employee was using a ladder to remove a display outside a store. He fell about 12 feet to the concrete sidewalk and suffered hip injuries. He was hospitalized.,1
"An employee operating a transfer press was manually moving a press ram when their left hand slipped off the flywheel onto the top of a gear. The employee's third and fourth fingers became caught in the gear, resulting in an amputation to their fourth finger.",0
"An employee was adjusting the backstop on a brake press. His left hand was caught between the press's bottom and top dies, and he suffered broken bones.",1
"An employee fell from a ladder to the ground. He suffered brain bleeding; ear bleeding; and fractures to facial bones, his skull, his arm, his wrist, and a rib.",1
An employee tripped over a curb while exiting a car. The employee suffered a broken ankle.,1
An employee was working at a machine. His left index finger was lacerated by a part leaving the machine and entering a straightening die.,1
An employee was climbing down a fixed ladder from a roof into a building. He fell about 10-12 feet and suffered back and head injuries.,1
An employee was shutting a lift gate on a delivery truck. The employee's fingertip was caught in the gate and was amputated (without bone loss).,0
"An employee was driving a company vehicle within the facility when the vehicle veered off the road and struck a light pole. The employee sustained injury to a wrist, and a dislocated hip.",1
"An employee was driving a work vehicle to clock out for the end of the day when they struck a bridge plate hanger on the driver's side, resulting in multiple fractures in their left leg.",1
"An employee fell through a skylight on a roof, landing on the ground below and suffering a back injury.",1
"An employee was collecting a sample at a closed loop station. Recently installed tubing came loose, spraying the employee with spent acid. The employee suffered second-degree burns to the right forearm and left wrist.",1
"An employee was inspecting a pipeline after hydroblasting. The employee was blasted with a sudden burst of high-pressure steam, suffering burns to the shoulders, hands, and knees.",1
"On April 21, 2021, an employee was using a paint gun. As he tried to tighten or clear the nozzle, the gun sprayed his right hand, lacerating it. He was hospitalized.",1
"An employee was standing next to a work site entrance. A truck ran over a 10-pound rock, which was pinched between the pavement and the truck's tire, then launched toward the employee. The rock struck his left shin, breaking the tibia.",1
"On April 21, 2021, an employee was using a 4 1/2-inch handheld grinder on a 10-inch stainless steel fitted pipe. The grinder kicked back, knocked his safety glasses off, and struck his face, lacerating it near his left eye. He was hospitalized.",1
An employee was driving a truck and hit a set of railroad tracks. The truck bounced and the employee hurt his back.,1
"A water main line failed while being pressure-tested. It sent a bolt flying that struck an employee, causing internal injuries.",1
An employee was operating a table saw. The sawblade caused an amputation to the employee's right index finger.,1
"An employee was loosening a twist-lock on a container on a vessel. A piece of metal from the ship's crane fell onto his head, piercing his hard hat and lacerating his head. He was hospitalized.",1
"An employee missed a step up into a building and fell, landing on her left arm and breaking it.",1
"An employee was working at a shaker. His fingers were pinched between a concrete mold and the shaker, and his right middle and ring fingertips were amputated.",0
"An employee was using a mobile ladder, gathering boxes from a storage rack. A forklift struck the ladder and the employee fell to the concrete warehouse floor. The employee suffered bleeding from the head, a broken collarbone, and broken ribs. The employee was hospitalized.",1
"n employee tripped on a comfort mat and fell to the floor, suffering a broken hip.",1
"An employee was hauling a load of salt water to an oil well to be pumped into the well. The truck hose was connected to the well. When a valve was opened on the truck, the pressure blew the aluminum hatch off the truck and it struck the employee. The employee was hospitalized for head and shoulder injuries as well as a punctured lung.",1
"An employee was loading a box truck. The truck began to pull away and the employee fell to the concrete below, hitting the back of his head. He suffered a contusion and laceration to the back of the head, as well as a broken ankle.",1
"On April 21, 2021, an employee was removing a pan from a conveyor when the employee's right index finger was caught between a belt and a pulley. The finger was degloved.",1
"An employee fell from an elevated platform to the floor, suffering a broken skull, other fractures, and contusions. The employee was hospitalized.",1
An employee was cutting a board using a circular saw. The saw amputated the employee's right index finger and lacerated two other fingers.,1
"An employee was wrapping a tub for shipment. He tripped over a roll of shrink wrap and fell to the floor, suffering a broken hip.",1
"An employee tripped on the leg of a rack while walking by it. He fell to the concrete floor, landing on his right knee and suffering a knee injury that required hospitalization for surgery.",1
"An employee was standing on a pallet of tires on an order picker. The pallet fell and the employee fell with it, striking the tires and the ground below. The employee suffered three broken back vertebrae and broken ribs.",1
"An employee was trimming trees from a raised bucket. A branch fell into the employee, knocking them out of the basket. The employee suffered a broken left arm, a broken left shoulder, and back injuries.",1
An employee was loading a new piece of metal on a machine after stopping it. The machine engaged and the shear blade amputated three of the employee's fingers.,1
An employee tripped while walking away from his vehicle and fell to the asphalt ground in a parking lot. He struck his head and suffered a scalp laceration.,1
"An employee got tangled in a hose while stepping out of his truck. He fell backwards to the pavement, suffering a broken rib and a punctured lung.",1
"A dumpster fell into a truck hopper, pinning an employee's left hand against the truck. The employee suffered amputations to the index, middle, and ring fingers.",0
An employee was putting a temporary patch on an auger chute when the auger amputated three of the employee's fingers. The machine was running at the time.,1
"An employee was driving a lift truck through a warehouse. The truck struck a vertical I-beam, and the employee's head was lacerated on the truck's overhead guard. The employee was hospitalized.",1
An employee fell from a window sill to the concrete 5 feet below. The employee suffered internal injuries and was hospitalized.,1
"An employee was adjusting the lower pin alignment on a robotic cell stationary welder. The welder actuated, pinching and lacerating the tip of the employee's right index finger. The fingertip was amputated.",0
"An employee was riding a bicycle between two buildings on a campus. The bicycle chain disengaged and the employee fell, suffering a broken collarbone, a head laceration, and a scraped knee.",1
"Two employees were working on a boom truck that had outriggers and a leaking hydraulic cylinder. The injured employee had removed the hydraulic cylinder, rebuilt it, and reinstalled it. While verifying that the repair was correct, a bolt fell into the frame rail. As the injured employee reached to retrieve the bolt, the hydraulic cylinder went into motion resulting in amputation of the first knuckle from the right index finger.",0
An employee was using a utility knife to demolish vinyl flooring. The knife slipped through the material and lacerated the employee's wrist.,1
"An employee was cleaning debris from under a semi truck. The truck was driven forward and ran over the employee's leg, breaking the fibula.",1
"During the startup process of the pot and hot marble machine, a piece of glass punctured an employee's glove and left hand.",1
"An employee was working on a vehicle. The employee's index finger was caught between one of its rims and a caliper (part of its brake system). The employee was hospitalized, suffering from a broken and cut finger that was then medically amputated above the second knuckle.",1
"An employee was installing a boom pin on an overhead tree trimmer. While the employee was holding a bushing in place, the crane holding the boom in place shifted and amputated part of the employee's left thumb.",0
An employee was freeing a hose stuck in an in-line extruder. The extruder's saw blade amputated three fingertips on the employee's left hand.,0
"An employee was tying down a crane boom onto a flatbed trailer. As he was on the flatbed, securing the boom with tiedowns, he lost his grip and fell about 5 feet. He hit a box trailer and then the gravel ground, suffering damaged vertebrae in the lower back.",1
An employee was working on a piece of machinery. The employee was knocked off the equipment and lost consciousness. The employee was hospitalized for brain swelling and surgery.,1
"An employee was trying to unclog a kitchen drain. A mixture of bleach and a drain cleaning solution produced toxic vapors, which the employee inhaled.",1
"An employee was replacing belts on an air compressor. The motor pulley rotated, grabbing the employee's fingers and pinching them between the tightened belt and the pulley. The employee suffered a severed right index finger, a lacerated right middle finger, and a broken right ring finger.",1
A telescopic conveyor belt at a truck loading dock deeply lacerated an employee's leg.,1
"An employee was cutting dunnage on the back of a trailer using a chainsaw. When he stepped back after finishing, his foot caught a steel beam and he fell off the trailer to the ground. He suffered a broken right scapula and broken ribs and was hospitalized.",1
"An employee was rolling wire back to the truck and had to cross a creek. While crossing, the employee became stuck in the creek causing him to sustain a fractured right femur.",1
"At 4:06 a.m. on April 22, 2021, an employee was stepping off energized conveyor rollers onto an adjacent conveyor frame after clearing a jam on the line. He lost his footing and fell backward off the frame, landing on the concrete floor about 15 feet below. He suffered a head injury and was hospitalized for surgery.",1
"An employee was operating a forklift in a trailer. The trailer pulled away from the dock; when the employee backed out, the forklift fell to the ground below, and the employee suffered an injury to the left foot that required surgery.",1
"An employee slipped on ice between cars in a parking lot, fell to the ground, and suffered a broken femur.",1
An employee was removing the cover for an exterior fuel window drawer. She fell and struck her head on the brick pillar behind her and sustained a head laceration.,1
"During a tooling change on a piece of equipment, a maintenance mechanic had just removed a heat plate when another employee walked in his direction. He flipped the hot plate toward his chest to keep it from touching the other employee and suffered a pulled or torn muscle in the upper left arm and shoulder.",1
An employee was cleaning adhesive off a roller. The roller caught the rag he was using and pulled in his right hand. He suffered a laceration to the hand and a broken right finger.,1
"An employee was cleaning a pool with a leaf net. He tripped on pool furniture and fell, suffering a head contusion and a concussion.",1
"An employee was hooking up an air compressor to a pickup. The air compressor started rolling on its tires, pushing the employee toward the pickup. The employee's hand was smashed, causing broken bones.",1
"An employee was servicing a hydraulic line and punctured their right middle finger, resulting in hospitalization.",1
An employee was walking on a sidewalk when a car moved forward from its parking place and pinned the employee against a building. Both of the employee's legs were broken.,1
"At about 10:15 a.m. on April 22, 2021, an employees' right foot got caught on the base of a printer stand as she turned to walk toward her work station. She fell to the floor, suffering a broken right tibia and a dislocated right ankle.",1
"An employee was holding a stake for concrete molding while a co-worker was driving the stake with a 10-pound hammer. The employee thought the co-worker was finished and grabbed the top of the stake to assist himself up from a kneeling/bending position when the hammer struck the end of the employee's right-hand pinky finger, resulting in a fingertip amputation.",1
"An employee was adjusting stabilizers at the top of a ladder, preparing to install solar panels. He fell from the ladder to the pavement 8 feet below, sustaining a broken left ankle.",1
"An employee was driving an electric pallet jack when he fell to the ground, suffering a contusion to the back of the head. He was hospitalized.",1
An employee was putting hides on hooks and pulling hides off hooks. The employee suffered a hernia.,1
"An employee was placing concrete mesh in preparation for a concrete pour. A guardrail failed and the employee fell about 12 feet to a lower level, suffering two broken fingers on the right hand, two broken right-side ribs, and a broken right hip.",1
"An employee was moving three tooling plates to a cleaning area with a magnetic hoist. The plates bumped into the cleaning station and one of them was jarred loose. It fell and struck the employee's left leg, lacerating it.",1
"A forklift driver and a truck driver were loading a freight box onto a truck. While headed to the truck, the truck driver was struck on the left ankle by the forklift's forks. The truck driver was hospitalized, requiring surgery.",1
An employee was pulling and pushing two carts at a customer's garden center. The employee tripped and fell and broke her knee.,1
"An employee was removing a bearing from a joint using a hydraulic press. The knuckle slipped from the press and struck the employee in the arm, breaking it.",1
"An employee was using a knife to cut a piece of rubber when the knife slipped and cut the employee's left forearm, resulting in a laceration that required hospitalization.",1
"An employee was taking an online order out to a customer in a cart. The cart and items tipped over. While trying to keep them from falling to the ground, the employee suffered a crushed lower-back vertebra.",1
"Two employees were changing air filters on top of a roof. They had accessed the roof by way of a scissor lift. As they started to descend down, the scissor lifts' wheel rolled into the dirt and the lift fell over. The employees fell about 20 feet to the ground. One employee was hospitalized with an injury to the pelvic region.",1
"An employee was installing insulation around a tank at 52 inches above the floor when they fell to the floor, resulting in an injured left ankle.",1
An employee was operating a powered industrial truck (PIT) and backed under a storage rack. The employee's head and face struck the rack and the employee sustained contusions and lacerations.,1
"While walking towards the office inside the warehouse, an employee slipped on a piece of debris (green strap) that was on the floor and fell. The employee sustained a fractured right hip.",1
"An employee fell from the last step of a stool, landing on the floor and suffering a knee injury.",1
"A truck driver opened the left door of a trailer, and an automotive rack fell out and hit him in the head. He suffered a concussion and was hospitalized.",1
"An employee was throwing pecans onto a moving conveyor belt when their finger became caught between the belt and a pulley, resulting in a fingertip amputation.",0
"After an employee turned on a finger joint machine and a clamp cylinder, the employee's right hand was caught by the lumber clamp in the machine's operating area. He suffered broken bones in the palm of the hand.",1
An employee was struck by a motor vehicle while walking in a facility. The employee was hospitalized.,1
An employee was investigating the chain of a pallet jack that had hung up. The chain pulled tight and amputated the employee's left index fingertip.,0
An employee was cutting cardboard tubing with a miter saw and suffered an amputation to the left thumb.,0
"An employee was trying to remove waste material from a guide roller at the exit of an accumulator on a carpet coating line. The employee's right arm was caught in the waste material and rolled around the bar, which broke the employee's humerus.",1
"An employee was checking the hood motor on the roof for proper function. While climbing the outside roof access ladder, the employee fell and sustained a broken pelvis, bleeding in her spleen, and a head laceration.",1
An employee was trying to clear a jam in an extruder. The extruder crushed the employee's right hand and broke the employee's right thumb.,1
An employee was inflating a wheelbarrow tire when it exploded. The employee suffered facial fractures and lacerations and was hospitalized.,1
"An employee was removing a switchgear metal cover panel. A tool fell into the switchgear compartment and contacted a 480-volt bus, resulting in an arc flash that caused second degree burns to the employee's face and arms.",1
"An employee was working on a scissor lift near a hook conveyor belt system when a cord from the conveyor belt got stuck on a bolt of the scissor lift causing the lift to fall over. The employee fell from a height of 12 feet to the concrete floor below and sustained a fractured pelvis, broken ribs, an abrasion on a lung, and chipped vertebrae.",1
An employee was using an overhead crane to move a metal coil of steel from a machine and place it on a skid. The coil shifted while being set down and pinched the employee's left ring finger amputating the fingertip just below the nail bed.,0
A truck driver was closing the doors on his trailer when another truck struck the trailer causing the truck to bounce and shake erratically. The driver suffered a broken pelvis and a laceration across his back.,1
"An employee was attaching a trailer hitch to the ball on a vehicle. The employee's left index finger was crushed between the ball and the hitch, causing an amputation to the finger.",0
A forklift ran over an employee's foot as it backed up. The employee suffered a broken ankle.,1
"An employee was leading a horse and the horse turned and kicked him in the abdomen, resulting in bruises.",1
"An employee was on a crank-up scaffold, working to dismantle it and lower it to the ground. He fell to the ground 15 feet below, hitting a board lying there and suffering a broken neck.",1
"An employee was standing on a ladder, preparing the outside of a house for painting. The ladder slipped and the employee fell to the ground about 15 feet below. He suffered broken ribs, a broken leg, and a cracked skull and was hospitalized.",1
"An employee was trying to push out a catch pan to clean an area. The employee's right index finger came into contact with the machine's drive chain and sprocket, causing an amputation to the fingertip. The machine was guarded at the time.",0
"The security officer was working at a bus station when a bus driver stopped and asked for assistance. The officer asked a passenger to leave the bus and the passenger assaulted the officer, resulting in a fractured nose, concussion, and a laceration above left eyebrow.",1
"An employee was working from an elevated scaffold system. While applying force with a burke bar to strip the wood, he fell 8 feet to the dirt. The employee was hospitalized with a dislocated and fractured right foot.",1
"At 8:30 a.m. on April 24, 2021, an employee was on the fifth rung of an 8-foot ladder. The ladder was knocked over and he fell to the concrete floor, suffering broken bones in his left leg and tendons in his left shoulder.",1
"At approximately 0900, an employee was trying to move a pulp roll back into position on a pulp feed rack. The pulp roll slid off the rack onto the floor and caught the employee's right arm against the rack. The employee was hospitalized with a broken arm that required surgery.",1
"A casino cash box was dropped on an employee's left foot. The employee was hospitalized, suffering from foot swelling and the exacerbation of a pre-existing condition.",1
An employee was caught by a pinch point resulting in a partial amputation of the left ring finger.,0
"An employee was walking through a store to get change for her register when she tripped and fell to the floor, resulting in a fractured arm that required hospitalization.",1
An employee was walking in a back kitchen/storage area. The employee stepped into a drain containing hot water and suffered second-degree burns. She was hospitalized.,1
An employee was reaching for filling inside a mixer. The auger caught his hand and pulled his arm in. He suffered lacerations and a broken arm.,1
An employee was inside a scissor lift when a piece of equipment knocked over the scissor lift. The employee fell out of the lift onto the concrete floor.,1
"An employee was inspecting a machine that organized short jerky sticks. As he was pointing out a segment of jerky, the collator belt pulled in his left index finger and amputated it.",0
An employee suffered a severe asthma attack in reaction to the wax being used to clear floors. She was hospitalized.,1
An employee was installing a roof system on an all-terrain vehicle. The employee fell from a step stool and suffered a broken right hip.,1
An employee was operating a forklift when it struck a pole. The employee was hospitalized for a head injury.,1
An employee became dizzy while doing morning work in a bakery. He fell backwards to the floor and suffered a broken hip.,1
"While opening a valve an employee was splashed with chemicals and sustained chemical burns to the right leg, right arm, and face.",1
"On April 25, 2021, at 8:56 AM, natural gas pressure increased at the fuel skids which activated one of the pressure safety valves. An employee was dispatched to shut off the gas supply remotely. Natural gas discharged from the PSV and accumulated in four adjacent enclosures that house operating equipment. The gas vapors ignited and an explosion occurred. The employee was burned on both arms and hands, their face, and lower torso. The employee was hospitalized.",1
"An employee was trying to dislodge a pallet that was stuck on a rail system. He cleared the pallet, but his left middle finger was caught between it and some equipment. The finger was broken and he was hospitalized.",1
"Two employees were installing 2-by-4 wood framing for column furring around a structural column. One of the employees, working from an 8-foot step ladder, reached back to align or fasten a 2-by-4 to the top plate on a corner of the column. The 2-by-4 he grabbed gave way; he lost his balance and fell to the dirt pad below, suffering fractures to the hip and upper leg.",1
"An employee was working inside a fan housing. The employee's right index finger brushed against a metal burr, and he got a metal sliver in the finger. The wound became infected and the employee was hospitalized.",1
"While climbing a ladder, the employee fell and broke their left arm and right knee.",1
An employee was removing boxes off the main conveyor when she tripped on boxes that were on the floor. The employee fell forward onto the ground and landed between the steps that lead to the raised pallet. The employee's right hip was fractured.,1
An employee attempted to cut a hole in a rubber mudflap with a pocket knife. The pocket knife closed and cut the tip of the employee's left index finger.,1
"An employee was standing at the edge of the furnace pit and was going to push out the lining on the furnace. The employee fell approximately 20 feet into the furnace tank and sustained broken vertebrae, two broken ribs, and a brain bleed. The employee was not wearing fall protection at the time of the fall.",1
"On 4/26/2021 at 4:00 PM, an employee and his co-workers were loading 30 sheets of 1/2"" plywood and 50 pieces of 2x4x10"" lumber in the back of a customer's trailer. As the forklift lowered the load onto the pallets in the trailer, some of the 2x4s gave way, causing the entire load to collapse and pin the employee's left foot inside the trailer. The employee suffered a fracture in his foot.",1
"An employee was sweeping a warehouse floor. A powered industrial truck ran over the employee's right foot, breaking bones.",1
"An employee shrink wrapped a pallet of selected cases of product and began to transport the pallet toward the shipping dock area using a pallet jack when they collided with the forks of a stationary forklift, resulting in a lower right leg fracture.",1
An employee was performing preventative maintenance on the control panel for a piece of equipment. The employee was using a spring loaded manual hand tool to cut a wire when the blade of the tool partially amputated his left thumb tip.,0
"While painting was being done by a contractor, an employee working in the assembly area had an allergic reaction to the latex floor paint. The employee was hospitalized.",1
An employee was working with a foam take-up machine in the manufacturing area when their lab coat got caught in machine. Their arm was then pulled into the machine resulting in a fractured ulna and radius.,1
An employee was driving a motorized buggy down an aisleway in the assembly area of a plant along with a co-worker. The employee braked to turn a corner when his foot slipped off the brake and on to the accelerator pedal. The motorized buggy turned the corner and went right into a mist collector. The employee was thrown forward in the buggy and suffered multiple fractures to his left foot that required surgery.,1
"An employee was moving a rolled coil when it fell, hitting and breaking his leg around the knee.",1
"An employee was installing a wooden office door. A splinter from the door impaled the employee's left hand, causing an infection. The employee was hospitalized.",1
"On April 26, 2021, at approximately 9:00 a.m., an employee was setting up a trimmer on the side of an edge bander when their right thumb contacted the trimmer, resulting in a fingertip amputation.",0
"While insulating refrigerant pipes, an employee came into contact with a battery bank and was shocked. The employee suffered hand lacerations and two dislocated shoulders.",1
An employee was pushing a conveyor belt out of a truck after unloading the truck. A finger on his left hand was caught in the folding parts of the belt. He suffered an amputation to the finger.,1
"An employee was cutting grass with a zero-turn lawn mower and collided with a parked vehicle in the parking lot, resulting in a broken leg and lacerations.",1
"An employee was working on a heavy-duty truck when the cab of the truck fell on the employee's left hand, resulting in a laceration to their left wrist and palm.",1
"An employee was working on a pizza production line, checking the weight of pizzas after they passed through a ""waterfall"" section that put cheese on them. She was removing some cheese that had built up on a roller when she was pulled into the rollers on the bottom side of the conveyor. She suffered fractures to the right arm and was hospitalized, undergoing surgery.",1
An employee was backing up a forklift when his left leg was caught between it and a shelving unit. His foot was broken.,1
"An employee was driving a tractor to position a bag cart closer to the bag chute of an airplane when he collided with a metal pole on the driver's side of the tractor, resulting in a fractured lower left fibula.",1
"An employee was installing granite pavers along the platform edge. When the employee stood up from a kneeling position, he lost his balance, and fell about 4 feet 10 inches from the platform to a track bed. He suffered contusions to his right-side ribs, shoulder, and chest, with a possible fracture.",1
"An employee was using a jointer machine to smooth the edges of plastic poly material. He had angled the material instead of laying it flat on the machine to smooth out its triangular edges. It kicked back and he slipped, suffering a partial amputation to the left middle finger.",0
"An employee was manually pulling a safety guard from a stack of safety guards and felt a pop in his right wrist. The employee was later hospitalized, suffering from wrist pain, swelling, and cellulitis with a possible ruptured tendon.",1
"As an employee was exiting a trench on a ladder, an excavator bucket became detached from its boom, slid down the slope of the trench, and struck the employee. The employee suffered a lacerated liver and damage to the diaphragm.",1
"An employee was stepping down from a platform to the floor when they slipped and rolled their right ankle, resulting in a fracture.",1
"A UPS employee was unloading packages from the left side of a truck. A vehicle hit the driver's side of the truck, pushing it into the employee and pinning him between the truck and a telephone pole. He suffered three broken ribs, a punctured lung, a shattered collarbone, thoracic vertebra swelling, and several cuts to the left side of his face and head.",1
"An employee was cleaning a striping machine for pavement markings on the ground. The hose jammed as it was wound up. As he tried to unjam it, the trigger was hit and the hose struck his left index finger.",1
An employee inhaled sodium hydroxide fumes and was hospitalized.,1
"An employee was washing down the production area floor in a meat department. He tripped and fell over a drain, suffering a dislocated shoulder and an injury to his vertebrae. He was hospitalized.",1
"While delivering mail, an employee tripped on a crack in a sidewalk and fell. She suffered multiple fractures to the left ankle and was hospitalized.",1
"An employee was unloading liquid caustic potash into a tank. When the hose was uncoupled, the employee was sprayed with the chemical. The employee was hospitalized, having suffered chemical burns to the neck and face.",1
"An employee was loading a metal plate onto a trailer. The plate fell out of the trailer, landing on the employee's foot. The employee suffered a broken metatarsal and four dislocated toes.",1
"An employee was operating a log loader. The loader struck a tree stump embedded in the ground and rocked, its open door swinging shut. The employee's left middle, ring, and little fingers were caught between the door and the cab. The middle ring and ring fingers were medically amputated at the second knuckle, and the little finger was reattached.",0
"An employee was on top of a platform (a truss for concrete). A piece of 2-by-4 wood caught his right hand, causing a partial amputation to the middle finger.",1
"On April 27, 2021, an employee was belt-grinding an aluminum casting when the casting's weight and momentum crushed the employee's left ring finger against a metal cart. The finger was severely lacerated and broken.",1
"An employee was standing by a forklift that a co-worker was operating in a stationary position using the brake. The co-worker moved and their foot slipped off the brake, causing the forklift to move forward and run over the employee's right ankle and foot with the back right tire. The employee suffered two bone fractures.",1
An employee was doing metal roofing work. The employee contacted an overhead power line with metal and suffered electrical burns.,1
"A forklift carrying a stack of pallets made a sharp turn next to an employee. The pallets fell onto the employee, who suffered a broken pelvis, a neck fracture, and a leg fracture.",1
An employee slipped and fell off a ladder while changing light bulbs. The employee suffered broken ribs.,1
An employee was loading skids with product and began to experience chest pains.,1
"An employee was walking toward customers when he came into contact with a skid loader that was backing up, resulting in a broken lower left leg.",1
"An employee fell off a roof, landing on the rocky, landscaped ground 14 feet below. He suffered four broken ribs on the left side and a fractured L2 vertebra.",1
"An employee was clearing backed-up ties on a trimming line. When the machine was turned back on, the chain raised quickly and crushed his left hand between the timber and the chain.",1
"On April 27, 2021, an employee was climbing to a second-story roof using a ladder. He fell, landing on the ground and suffering a broken left elbow and hand.",1
An employee was injured when the extension ladder he was working on slipped out from underneath him.  The employee suffered broken ribs.,1
"On April 27, 2021, at approximately 11:30 am, an employee was working on a machine with an exposed shaft. He was retrieving a dropped item when his hair was caught by the rotating shaft, resulting in a scalping injury and hospitalization.",1
"An employee was directing the loading of pallets of pavers onto a trailer. An object struck the employee, who suffered fractures to his arm.",1
An employee was stepping onto a platform when he lost his footing and fell from the top step to the concrete 20 inches below. He suffered a broken right leg and was hospitalized.,1
"A mini-excavator backed into an employee, its track breaking his right leg.",1
"On April 27, 2021, an employee was trimming plastic from a running machine. The employee's finger was caught between a rubber roller and the machine guard. The fingertip was medically amputated the next day.",0
"An employee was loading and unloading potted trees when a potted tree fell onto the employee's left leg, resulting in a broken leg.",1
"An employee was replacing a drive motor on a telestacker. When he removed the motor, the telestacker started to roll downhill. One of its wheels pinned the employee, who suffered broken legs.",1
"On April 27, 2021, an employee was stepping off a manlift onto a ladder when the lift started and moved upward. The employee hit his back on a metal tube running diagonally above him and was then pinched between the tube and the railing of the manlift. He suffered bleeding and fluid around the lungs and was hospitalized.",1
"On 04/27/2021 at 12:45 pm, an employee was pushing a buggy and pulling parts. The employee spun the buggy around and smashed his right pinky finger between the buggy and the door rack. The employee suffered a fractured right pinky finger and a subsequent partial fingertip amputation.",1
"An employee was delimbing a cut-down tree. One of the limbs kicked back and struck the employee between the ankle and the knee, breaking the employee's tibia.",1
"An employee was installing a stud for a dead end cap in a sectionalizer cabinet. An arc blast caused second-degree burns to the employee's face, neck, right elbow, and thigh.",1
"An employee was separating lighting on electrical relays. The employee was shocked by wires and fell from a ladder to the ground, suffering a broken hip.",1
"An employee was unloading steel members with a delivery crew. While the employee was trying to control a hoisted load, his hand was pinched between the load and material stacked on the delivery truck. He suffered a partial amputation to the finger.",0
"An employee was walking toward the back of a truck to grab a pair of gloves. Scrap iron was being unloaded from a trailer attached to the truck. A piece of angle iron fell from the trailer and struck the employee on the forehead, causing internal bleeding.",1
"An employee was walking on the rig floor when he slipped on an open drill hole 10 inches in diameter, falling to the floor and fracturing both elbows.",1
An employee was swapping out sides of a choke manifold during drill out operations when the threaded end of a 10K needle valve parted from the end cap and struck the employee causing a laceration to the right leg.,1
"An employee was filling a tire truck when the tire blew, resulting in bruised lungs and a laceration to the back of the head that required staples.",1
"An employee was cleaning the tank on the back of a tractor. The employee stepped from the tank onto the tractor's tire, slipped, and fell to the ground. The employee suffered a broken leg and was hospitalized.",1
"An employee slipped on water and fell to the floor, suffering a broken left femur.",1
"An employee was removing weights from the base of a sensor wind tower. The tower tilted and struck the employee, causing a head injury that required staples.",1
"On April 28, 2021, an employee was inspecting steel fixers in the second floor deck of a new hospital. When he stepped on the steel pan section (U-channel), his foot slipped and landed in a 20-inch-deep space between the pans. He suffered a broken left leg and was hospitalized.",1
"An employee was cleaning the second level of a processing unit with a leaf blower. The employee fell through a 4-foot gap in the railing, landing on the floor and suffering bruises, lacerations, and a knee injury requiring surgery. The employee was hospitalized.",1
An employee was working on a grain dryer when it lacerated his left thumb.,1
"An employee was pulling a hamper to the loading dock when his right hand was caught between the metal railing and the hamper, resulting in injuries that required hospitalization.",1
"An employee was getting stock out of a cooler. The employee fell over the filler box for a fryer that was being taken back to the sink to be cleaned, landing on the floor and suffering a back injury.",1
"An employee was manually operating a wire-drawing machine to remove the remaining wire coil. The wire came free of the guide roller and struck the safety cage, which lifted quickly and struck the employee in the face. The employee suffered a contusion and a laceration.",1
An employee was sharpening a 6-inch meat cutting knife with a handheld knife sharpener. The blade slipped and punctured the employee's abdomen.,1
"On April 28, 2021, two employees were lifting a patient and one of the employees suffered an arm strain.",1
"An employee was using a grinder to cut an aluminum conduit. The blade of the grinder broke off in the conduit, causing the grinder to jump up and cut the employee's left wrist and forearm. The employee was hospitalized.",1
An employee was helping get a truck unstuck from a ditch. The truck ran over the employee who was hospitalized.,1
"An employee was changing a valve on a mixing kettle when a cleaning chemical leaked from the valve onto the employee's left hip, resulting in a chemical burn.",1
An employee was repositioning an 800-pound component on a transfer cart using an overhead crane when the component shifted and caught the employee's left thumb and index finger between the component and the transfer cart. The employee's left thumb and index finger were crushed.,1
"An employee was cleaning a pinch roller assembly when their right index finger got caught in the roller assembly, resulting in a partial de-gloving and amputation.",0
"An employee was repairing roof insulation when his ladder become unstable. As he fell, his left hand caught a loose piece of thin, hanging metal strapping, which lacerated his ring finger.",1
"An employee was operating a hydraulic brake press to shape a piece of sheet metal. The employee was manually positioning the workpiece as he operated the machine and his left hand became caught between the die and the top punch of the brake press, resulting in amputation of the distal phalanx of the left index finger.",1
"A cook was dicing meat. The cook's knife amputated part of the employee's left middle fingertip, with no bone loss.",0
An employee was helping a crew repair a gate that had fallen off its hinges. A snake was run over by heavy equipment near the gate where the crew was working. The employee tried to remove the snake from the work area and was bit on their right index finger.,1
"An employee was assisting a co-worker in opening a precast concrete form so that the outer shell could be removed from the form when his left hand became caught between the form and the shell. The employee suffered a crushed fingertip, causing a fracture of the distal phalange, and partial amputation of the middle fingertip.",0
An employee was rolling a piece of steel on a steel roller. The employee's right index finger was pinched between a roller and the material. The employee suffered an amputation to the finger.,0
"An employee was working at a machine when she slipped and attempted to grab a table, catching her lower arm on piece of aluminum. The employee suffered a deep laceration to her arm, including possible vein and nerve damage.",1
"An employee was assisting a shipper with preparing a workstation crane and its components for shipment. The crane measured 390 inches long and 12 inches high. The employee was helping the shipper manually turn a bridge on skids from a vertical position to a horizontal position when the bridge struck the tip of their left middle finger, pinching it between the skid and the bridge. The employee suffered a fingertip amputation without bone loss.",1
An employee had been walking toward a conveyor. The employee fell and sustained a broken leg.,1
"Two employees were putting back a planer chain using a come-along. The come-along slipped and the chain fell, landing on an employee's right middle finger. The fingertip was amputated (without bone loss).",0
"An employee was sitting in her office chair when a ceiling tile above the employee that was saturated with water fell and hit them on the head and shoulder, resulting in a concussion and a shoulder injury.",1
"An employee was operating a backhoe to move tooling when it overturned onto its left side, catching the employee between the rollover protection and the ground. The employee suffered a fractured pelvis and leg.",1
"An employee was installing wood blocking on a south elevation parapet wall. While completing the task, the employee climbed through a guardrail system to access the security fencing area on a roof at an inmate recreation yard. The employee fell through the fencing, and the employee's fall protection rope snapped/tore. The employee landed on the concrete floor about 14 feet below, suffering a broken rib and a fractured hip.",1
"An employee was spraying mold release spray on an injection mold machine when the machine's tie bar closed and pinched the employee's hand on the spray can. The employee suffered crush injuries to their right middle and ring fingers, as well as an amputation of their right ring fingertip. The machine was guarded at the time of the incident.",1
"An employee was carrying one or two broken-down cardboard boxes when her caught got caught at the corner of a wooden pallet. She fell, breaking a bone just below the kneecap.",1
"An employee was covering an area of frac sand with a tarp to prevent rain damage. A gust of wind pulled the tarp while he adjusting it, and he slipped and fell off a ladder to the ground. He landed on his left hand and elbow, suffering a broken ulna.",1
"An employee changed out a press mold and heated a nozzle with a torch to purge the press out. After the employee was finished heating the nozzle, he went to close the front door when degraded plastic came out of the barrel and onto his right arm. The employee suffered burns to his arm that required hospitalization.",1
"An employee was helping restrain a 14-year-old mental health patient. The patient freed a leg and kicked the employee multiple times in the back of the head, causing a brain bleed. The employee was hospitalized.",1
"An employee was maneuvering a stand-up reach lift to a charging station when his left foot was pinned between the lift and a concrete column, resulting in amputation of the lower left leg.",1
"An employee was in a parking lot, carrying two tubs of mail to her vehicle. Her foot caught a crevice between the sidewalk and a curb and she fell, spraining her left ankle and breaking both right ankle bones. She was hospitalized and underwent surgery.",1
"An employee was setting up at his work station when he was assaulted by another employee with an air hose nozzle, resulting in an abdominal injury that required hospitalization.",1
"An employee had just loaded a 24-foot spreader bar onto a trailer. The employee was moving the bar when it fell from the trailer, knocking the employee off the trailer. The employee suffered several contusions and a broken jaw.",1
An employee was walking down steps and fell at the last step. The employee suffered a broken right ankle.,1
"An employee was pouring a concrete floor deck. The decking collapsed and the employee fell about 20 feet to the ground, suffering broken ribs, a broken skull, and a back fracture.",1
"An employee was working on an out-of-service electrical pole. While he was up the pole on a ladder, and then on hooks, his hand touched with a primary voltage jumper that had burnt off at the transformer. He suffered an entry wound through the little finger and out the back of his arm behind the elbow.",1
An employee was installing an HVAC unit when his finger was caught in a belt and pulley system and amputated.,1
"On April 29, 2021, at 8:47 a.m., an employee was operating a winding machine when their right-hand middle, ring, and pinky fingers were crushed at the point of operation, resulting in hospitalization and fingertip amputations.",1
"An employee was cleaning a machine when their hand became caught in a rotating metal plate, resulting in partial amputations of two fingers.",0
"Employees were demolishing metal ductwork. While they were removing hanging straps, a duct slipped and cut an employee's left forearm.",1
An employee was removing a part inside a wax injection mold machine. The machine cycled and crushed the employee's hand.,1
"An employee was standing at a loading dock next to his forklift. Another forklift, parked nearby, experienced a brake failure and rolled down a slope toward the employee. The employee was caught between the two forklifts and suffered a pelvic fracture and internal bleeding.",1
"An employee was cutting boneless pork sirloin chops using a meat band saw when the saw came into contact with his right hand, resulting in an amputation of the index finger.",0
"An employee was preparing dough in a dough machine. The machine was closed and turned on with her left index finger inside, amputating her fingertip. She was hospitalized.",1
"An employee was installing low data wiring on the second floor inside a new home under construction when they fell from the second floor to the concrete first floor below, resulting in broken heels on both feet.",1
"On April 29, 2021, an employee was in the gym, trying to keep a child from running out of the area. She fell to the floor and broke a bone in her lower left leg. She was hospitalized, requiring surgery.",1
An employee was using a pneumatic staple gun while fabricating a wall panel. The gun fired a staple into the employee's left foot.,1
"An employee working in a home under construction was prepping trim on a ladder that was on top of scaffold. The scaffold tipped over while he was on the ladder and the employee fell to the floor, resulting in a broken right elbow, broken left wrist, cut nose, and contusion above the right eye.",1
"An employee was working on a stepladder. He came in to contact with an energized ceiling fan, was shocked, and fell off the ladder. He suffered broken ribs and a punctured lung.",1
"On April 30, 2021, at 1:00 p.m., an employee was cutting a plywood square with a circular saw when his hand slipped and the saw lacerated four fingers on his left hand.",1
"On April 30, 2021, an employee was folding back a dock leveler after making a delivery. The lip plate did not automatically fold down when the push button was used, so the employee used their hand to push it down. The lip plate snapped downward all at once, and the three middle fingers on the employee's right hand were crushed.",1
"An employee was operating an electric pallet jack when the pallet jack jumped backward, smashing her thumb between the pallet jack and a cardboard bailer. The employee suffered a crushing injury to her left thumb and a possible amputation.",1
An employee had an allergic reaction to a bleach-based cleaning compound. The employee was hospitalized for respiratory distress.,1
"On April 30, 2021, an employee was placing a tag onto an empty pan and was struck by a side loader. The employee was dragged several feet down the filling station and was caught between the side loader and the filling station. The employee sustained bruises, contusions, and a left knee fracture and torn meniscus. The employee was hospitalized.",1
"Carpenter crews were setting a bulkhead panel. The panel was being lowered into position when it got hung up on a horizontal water stop cut out on a 2x6 guide bar. The injured employee pushed on the panel to clear the guide. Upon doing so, the slack from the cable was taken up and the panel shifted. The employee's left-hand fingers were pinched between a set form and the bulkhead panel resulting in a partial amputation of the left ring finger involving the tuft of the distal phalanx.",1
"An employee was removing a motor. The motor fell suddenly, swung sideways on wires it was connected to, and struck the employee's head. The employee suffered a head laceration and a concussion.",1
"An employee was on his hands and knees laying tile in a client's bathroom. The friction from the floor caused a blister on his left knee, which became infected, requiring hospitalization.",1
"An employee was unloading material from the back of a truck when they stepped backward and fell from the truck, striking their head on the ground and resulting in a head laceration and soreness to their shoulder and elbow.",1
"An employee was repairing a boom forklift. Its boom lowered and pinned him against the hood, breaking his pelvis in two places.",1
"An employee was working from an 8-foot platform ladder. The weight shifted and the ladder tipped over, causing the employee to fall and hit the floor feet first. The employee suffered a shattered right heel and was hospitalized, requiring surgery.",1
"A temporary employee was driving an empty pallet jack when he struck a rack and fell off the pallet jack to the ground, resulting in a closed-head injury with a brain bleed.",1
"An employee was lining up a weldment hole so that a blade could be installed on a machine. The weldment slipped off and pinched his finger, causing an amputation to the finger.",0
"Hot grease burned an employee, who then fell to the floor and suffered a dislocated shoulder.",1
"An employee was standing on the ground, counting parts in a warehouse. A forklift's load of metal racks became unbalanced and fell on the employee, who suffered facial lacerations, bruising on the right arm, and a broken ankle.",1
"An employee was in a pedestrian walkway. A forklift ran over the employee's right foot, breaking it.",1
"An employee was backing up a compact roller when he ran over some rebar, which punctured a tire and caused it to go flat. The compact roller became unbalanced and fell to its side, injuring the employee and resulting in four broken toes.",1
"An employee was cutting iron bar samples with a horizontal band saw when the saw made contact with the employee's right middle finger, resulting in a laceration.",1
"An employee was spraying down the shaft and blade of a mixer. The employee became stuck to the shaft, which was still sticky, and was pulled in and spun around. The employee suffered a broken tibia and fibula and was hospitalized.",1
"On April 30, 2021, an employee and his co-workers were offloading glass from a crate and when the crate opened. All of the glass in the crate fell out, landing on the employee's right thigh and trapping him against a fence. He suffered a broken right femur and was hospitalized.",1
"An employee was assisting two co-workers with unloading an air handler from a semi-truck using a forklift and a crane. The equipment fell from the crane while being unloaded from the forklift, hitting the employee and resulting in a fractured right leg.",1
An employee was descending the ladder on a tanker truck after opening the vent on the truck and missed the bottom step. The employee fell to ground and landed on his feet. The employee suffered a fractured tibia and a dislocated ankle.,1
An employee was removing a bad part out of the mold area of a compression molding machine when the mold closed on his left hand resulting in the complete amputation of one finger and the partial amputation of another.,0
"An employee was removing scaffolding. While the employee was moving from one section of the scaffold to another on a plank, the plank broke and the employee fell to the ground. The employee's leg and ribs were broken.",1
"A driver was opening a trailer door when a gust of wind blew the trailer door open, hitting the driver in the face and knocking him to the ground. The employee suffered a hip injury.",1
An employee was cutting meat with a bandsaw. The saw amputated the tip of the employee's left thumb.,1
"An employee was using a stapling machine to staple books together. His left hand slipped into the machine, which broke his ring finger.",1
"On 04/30/2021 at 12:20 a.m., an employee was assisting two co-workers in retrieving a piece of expanded metal located behind a stack of sheet metal. The stack of sheet metal contained 25 to 30 sheets of 4-foot by 10-foot sheet metal that weighed approximately 50 pounds each, or 1,250 to 1,500 pounds total. While the employee and a co-worker were manually holding the stack of sheet metal, they lost control of the stack and attempted to move clear of the falling metal. The employee's right foot was pinned beneath the stack as it fell, resulting in a foot fracture.",1
"An employee was winding a winch line onto a winch drum. The line termination hardware pulled the employee's left hand into the guide rollers, causing an amputation to the index fingertip.",0
An employee was cutting green onions with a knife and partially amputated their left index finger.,0
"An employee was moving furniture to the back edge of the delivery truck when they fell out of the back of the truck, landing on the ground and sustaining bleeding on the brain.",1
"An employee climbed an 8-foot fence. When the employee jumped down, their right tibia and left ankle were broken.",1
"An employee was using a bandsaw when it lacerated the tip of his index finger, causing an amputation.",1
An employee was operating the batcher and mixing feed from the mill office when their left arm was caught in the automatic gate of the machine. The employee sustained a broken left arm and a laceration.,1
"An employee was walking around his truck at the customer's loading dock area when they slipped in mud and fell, resulting in a broken right ankle and leg.",1
An employee was clearing a jam on a bagger machine. He was severely shocked by static electricity.,1
"An employee was climbing a ladder from the roof of a parking garage to the roof of an elevator shaft. He disturbed a nest of bees or wasps and fell backwards off the ladder, landing on his back and suffering back injuries. He was hospitalized.",1
"Two employees got into a fight, and one of them suffered a broken jaw.",1
"An employee was carrying tools while walking down concrete steps. When he placed his left foot on the third step, he slipped and tried to catch himself by putting his right foot on the step below. His right foot landed awkwardly on the step, resulting in two broken bones in his right leg. He was hospitalized for surgery.",1
"An employee was throwing a bag of recycling into a bin and fell 3'10"" from the loading dock to the ground, resulting in a fractured right shoulder.",1
"An employee was standing on the bed of a crane, waiting to unhook a concrete block that the crane had just lifted off the ground. The crane hit an energized electrical wire and the employee was shocked, suffering internal burns and a heart arrhythmia. The employee was hospitalized.",1
"One employee struck another employee in the head, causing a concussion.",1
An employee was assisting a patient and slipped on a padded mat. The employee put both hands out to break their fall and suffered bilateral buckle fractures in both wrists.,1
"An employee was repairing an electric cable from an aerial bucket. He became ill, then lost consciousness while being lowered to the ground. He was hospitalized, suffering from severe dehydration.",1
An employee was trying to separate two dolly carts that were stuck together. The employee tripped and fell and suffered fractures to the ends of his left tibia and fibula at the ankle.,1
An employee was working in the aisle stocking items when a forklift was leaving the receiving department.  The forklift hit the employee in the stock aisle and pinned them against the shelving unit. The employee sustained a broken ankle and a ruptured liver.,1
"Employees were conducting catalyst changeout activities in a reactor. A pipe wrench fell 23 feet into the space and struck an employee on the back of the right hand, amputating the right middle finger up to the first knuckle.",0
"An employee was sorting burgers. The divider between two conveyors fell off and the employee grabbed it by the handle. As the employee was trying to pull it back, the employee's hand got stuck; one of their fingers was smashed and another was amputated.",0
An employee was operating a forklift. The employee's foot was pinned between the lift and a pole and was crushed. The employee was hospitalized.,1
"An employee was operating a tail stretcher machine. A pneumatic cylinder in the machine failed, and the rod from the cylinder flew into the employee's right thigh, puncturing it.",1
An employee was cutting a slat of pinewood on a table saw. The sawblade cut the employee's right thumb.,1
"On May 3, 2021, an employee suffered an amputation to the tip of her right middle finger while placing a rod in a clamp fixture of a machine.",0
"An employee developed cramps and became ill while on his mail delivery route. He was hospitalized, suffering from heat-related illness.",1
"An employee was selecting cases while operating a powered pallet jack when his right leg was run over by a forklift, resulting in a fractured tibia and fibula.",1
"An employee was struck by limestone rock falling from the edge of a roof. The employee suffered s skull fracture, facial lacerations, and two punctured lungs.",1
"A worker slipped and fell while wearing stilts, resulting in a fractured hip that required hospitalization.",1
"An employee was repairing an electrical line, clearing a tree. The tree struck his jaw. He suffered broken teeth and facial lacerations. He was hospitalized.",1
An employee was operating construction equipment and ran off the road at a construction site. The driver suffered broken bones and was hospitalized.,1
"At 9:00 p.m. on May 3, 2021, while moving a pallet, an employee was bitten on the right middle finger by a snake.",1
"An employee was restraining a cat in preparation for sedation when the cat bit the employee's hand, resulting in hospitalization due to an infection.",1
"At 9:45 a.m. on May 3, 2021, an employee was sitting in front of an iron plate, using a hand grinder to remove tack welds from it. The wheel jumped, slipped on his right leg, and cut him just above the knee on the side. He was hospitalized.",1
"An employee was loading stock into a bandsaw's automatic feeder. As the employee pushed the stock through the feeder, the hydraulic clamp came down and caught the employee's right hand against the stock. The employee's ring finger was partially amputated.",0
An employee was using a metal rod to unclog an auger system that had clogged with cotton lint. The machine caught the rod and crushed his right middle finger. He was hospitalized.,1
"A maintenance employee was adjusting conveyor tracking bolts at the bottom frame of the conveyor when he began to feel dizzy and grabbed the frame to balance himself. The employee's hand contacted the moving conveyor, resulting in broken bones in his hand that required hospitalization and surgery.",1
"An employee was cleaning out a trailer when they slipped and fell 17 inches from the trailer to the ground, resulting in a fractured tibia and fibula.",1
An employee was handling a pipe and amputated the tips of their right ring and middle fingers.,0
"An employee was using a setting tool when their right middle and ring fingers were caught between the sleeve and the mandrel of the tool, resulting in an injury.",1
An employee contracted Clostridium difficile (C. diff) while caring for a patient with C. diff and was hospitalized.,1
"An employee was guiding a granite slab that was on a forklift. He slipped and fell, and the forklift ran over his right foot. His foot and lower leg were severely injured and the foot was amputated.",1
"An employee tripped over a stationary package cart and fell to the ground, resulting in a possible hip fracture.",1
"An employee was attaching a front end loader bucket to a machine. He aligned the parts to place a pin, and a bar moved and pinched his left index fingertip. The fingertip was amputated.",0
"An employee was unclogging a drain with a water hose when it backwashed on him. There was residue of a cleaning agent in the drain that caused burns to his arms, right knee, face, and eyes.",1
An employee was cleaning a saw. The saw was turned on and amputated the employee's left ring finger.,0
"A temporary employee was removing pineapple skins that were stuck in the pineapple corer machine. When the skins were removed, the machine started up and pulled the employee's right index finger into the gears, resulting in a fingertip amputation.",0
An employee was using a corner cleaner machine to cut excess vinyl material off the finished window frame and caught her hand under the clamp mechanism. The clamp pinched her hand against the window frame resulting in fractures to the hand and/or fingers.,1
"Three employees were working with a forklift to lift a cheese mixer and transport it into a plant. One employee's left ring finger was pinched between the mixer and a forklift mast, causing a fracture and amputation to the fingertip.",0
"An employee was holding the handle of a rough planer head and pushing it into place. It started to bind up, then overshot the home position. The tip of the employee's finger was crushed between the planer's handle and its frame, causing an amputation to the finger.",0
"An employee was walking in the parking lot when he tripped over a curb and fell to the ground, resulting in a separated left shoulder that required hospitalization and surgery.",1
"An employee was verifying products in a facility when they were struck by a forklift that was backing up. The employee's foot was crushed beneath the forklift, resulting in hospitalization and surgery.",1
"An employee was working on an assembly line using an electric socket wrench when her glove caught on the wrench, resulting in an amputation of the tip of her left ring finger.",0
"An employee was cleaning oil off the blade of a portable bandsaw. The saw activated and cut the tip of the employee's finger, causing an amputation.",0
An employee was attempting to lift a 5-gallon bucket of paint and sustained a partially collapsed lung. Dried paint had caused the bucket to be stuck to the floor.,1
"An employee was standing in the reception area when a co-worker collided with her. The employee fell to the ground and landed on her wrist, resulting in a possible fracture.",1
"An employee was removing a brake chamber from a truck when it expanded and pinched his finger between the brake chamber and a bracket on the truck, resulting in a partial amputation of the left pinky finger.",1
"An employee was cleaning out a broaching machine at the end of a shift. The machine actuated, causing amputations to the employee's index finger (to the first knuckle) and ring finger (just above the second knuckle).",1
An employee fell while stepping down from a church podium. She landed on the floor and suffered a broken left femur.,1
"An employee was feeding stock through a table saw when their hand contacted the saw blade, resulting in an amputation of their left index finger above the middle knuckle.",0
An employee developed chest pain while lifting heavy boxes. The employee was hospitalized due to a pneumothorax.,1
"An employee was on a 2-foot step ladder, retrieving a box from a freezer shelf. The employee fell from the ladder to the floor, suffering a broken shoulder. The employee was hospitalized.",1
"Two employees were loading paper material onto a conveyor belt. One of them used a portable handsaw to cut the paper material before it was placed on the conveyor. The other employee then took the saw to return it to storage. The blade, still turning, lacerated fingers on his right hand and caused a partial amputation to the right ring finger.",0
"An employee walked into the vicinity of a co-worker who was using a brush cutter when the brush cutter kicked back and came into contact with the employee, resulting in a laceration that required surgery.",1
"An employee was working in a mechanical boiler room when they received a bug bite near their left shin, resulting in hospitalization.",1
"A mail carrier stepped over a railing between two properties that was 26 inches high. The employee's foot became caught in the railing and they fell to the ground, resulting in a broken rib.",1
An employee was walking on a flat roof and stepped on a piece of foam board that was covering a hole. The board collapsed and the employee fell through the hole onto the concrete floor resulting in a fractured left wrist and a fractured jaw.,1
An employee was placing the chain back on the sprocket of a rip saw when his glove was caught in the chain and sprocket resulting in amputation of his left pinky and ring fingers. His left middle finger was partially amputated.,0
"An employee was walking, lost balance, and fell. She fractured her left elbow and was hospitalized for surgery.",1
An employee was using a heavy-duty jack to lift a trailer. The jack caused a partial amputation to the employee's right thumb tip.,0
"An employee was assisting a customer with unloading a crate weighing 1300 pounds when the crate dropped from a forklift onto the employee, resulting in a broken leg and hand.",1
An employee fell backward while trying to climb onto a dock. The employee suffered an injury and was hospitalized.,1
An employee was checking the blades on a lawn mower and amputated a fingertip.,0
"An employee was feeding a piece of lumber into the saw machine. A loaded piece of lumber kicked back, causing the lumber the employee was holding to strike him in the abdomen, resulting in bruising to the abdomen and a tear to his small intestine. The employee was hospitalized.",1
"An employee was struck by the forks of a powered industrial truck (PIT) and pinned against an adjacent wall. The employee suffered leg pain, weakness, and loss of feeling.",1
An employee attempted to prevent a patient from rolling off the operating table when they received injuries to their neck and right arm that resulted in weakness and numbness.,1
An employee was directing a roll-off container truck to reverse into position for dumping demolition debris when a grapple loader nearby reversed and pinned the employee's right arm against the side of the roll-off container truck. The employee's right arm was crushed.,1
"At 4:45 p.m. on May 5, 2021, an employee was cutting up steel scrap with an oxygen lance rod. A piece of hot slag went under his face shield, bounced off his chest, entered his mouth, and was swallowed. He was hospitalized.",1
An employee was on a concrete landing about 5 inches high. His left knee buckled when he stepped down. He was hospitalized with a torn quadriceps tendon and a fractured kneecap.,1
"A blade fixture fell from a crane when a lifting strap broke. It struck an employee standing on the ground, causing injuries to the employee's head and abdomen.",1
"An employee was lubricating a motor. A nearby fan belt tugged his left hand into a pulley, partially amputating the tip of his left ring finger.",0
An employee was removing a hot blade from a machine and lacerated three fingers on his right hand and one finger on his left hand. The employee was hospitalized.,1
"On 5/4/2021, an employee was opening the top of a rail car for unloading and was sprayed with oleum on their head, face and eyes, torso and both arms and hands.",1
"An employee was in a narrow warehouse aisle when a forklift came down the aisle. The employee tried to climb onto racking to avoid being struck by the forklift, got caught on the racking, and suffered a broken ankle.",1
"An employee was removing plastic parts from an injection molding machine. The machine malfunctioned and closed on the employee's right hand, causing the amputation of the middle finger.",1
An employee was working on a machine that filters concrete into smaller pieces by tapping the outside of a feeder box with a rubber mallet. He then opened the door at the bottom of the feeder box and was unclogging the filter when the rotating paddles amputated two of his fingers.,0
"An employee was releasing the pressure from a setting tool. As the employee was screwing a wrench into the burst disc retainer, the retainer nut came free and the pressure escaped from the chamber. Debris struck the employee in the right shoulder and face, leaving foreign material in his eyes and causing contusions to the shoulder and the right side of his face.",1
"An employee was preparing a wall for paint. The employee leaned on a guardrail, then fell, landing on the concrete floor about 11 feet below and suffering knee injuries.",1
"An employee was walking in the facility, slipped on a piece of debris on the floor, and fell. The employee sustained a back injury.",1
An employee was pushing a rack of finished parts when a forklift struck the rack. The employee suffered multiple fractures that required surgery.,1
An employee was struck in the back by a tree limb that was being moved to a chipper area via a pulley system. The employee was hospitalized with fractured vertebrae and ribs.,1
"An employee fell off a ladder while trying to repair a broken overhead garage door. The employee landed on the ground and suffered a broken wrist, a broken orbital bone, contusions, and scrapes.",1
An employee was turning a forklift when his left foot was caught between the forklift and a product rack and crushed. The left foot was later surgically amputated.,1
An employee was ascending a ladder that was placed on a utility pole at a house. The ladder shifted and the employee fell and fractured his left foot/ankle.,1
"An employee was off-loading tires from his delivery truck and fell out the back of the truck. The employee sustained a head contusion, multiple fractured ribs, and a punctured lung.",1
An employee became dehydrated while laying cables in a ship. The employee stopped sweating and began vomiting.,1
An employee was holding the flip plate up on the trailer lift gate. The employee's left middle finger was caught between the flip plate and the lift gate platform and partially amputated.,0
"An employee was lifting a 400-pound spindle with an overhead crane. The load shifted and fell on his right hand, causing a partial amputation to the ring finger.",1
"An employee was tearing down a rack/pallet. When he bent down to pick up a beam from the floor, another beam fell and struck his eye resulting in crushing injuries to the eye.",1
An employee was setting the blade depth on a table saw before beginning a production run of parts and lacerated the tip of her left index finger. The fingertip was medically amputated.,1
"On May 6, 2021, an employee was unjamming a machine. As a sorter bin was lowering, the employee's left index finger was pulled into the pulley system resulting in a fingertip amputation.",0
"An employee was stacking bundles of floor trusses with the forklift. When he attempted to separate two loads, controls on the forklift were bumped and caused the load to lower, pinching his right index finger between the sticker and the top bundle of floor trusses. The employee suffered a fingertip amputation.",0
An employee was loading plywood onto a material hoist when a gust of wind pulled the plywood from his hands and it fell on his foot and fractured it.,1
An employee was working on the roof and fell off the roof edge. The employee sustained a leg injury.,1
An employee was delivering a package to a customer and was bitten on the lower lip by a dog.,1
"An employee was working from a scissor lift to lubricate the chain and sprocket on a overhead conveyor's motor. The employee observed a rag in the conveyor. As the employee retrieved the rag, his right pinky finger got caught in the conveyor chain/sprocket resulting in a fingertip amputation.",0
"An employee was diagnosing a problem with the air conditioner in a car when a belt possibly activated, causing amputation injuries to the left index and middle fingers.",1
An employee was writing information on a pack of lumber as it was moving down the chain and was caught between a lumber pack and the garage door rail. The employee was hospitalized for a traumatic injury to the abdomen.,1
"An employee was frying chicken. The employee opened the lid to the chicken fryer after a timer went off and hot oil spilled out striking his face, chest, and both arms and causing burns.",1
"An employee was filling a stainless steel batching table with hot water to begin a CIP cycle. Once the equipment filled with hot water, the pressure caused a faulty valve to open. The employee was sprayed with hot water and suffered second-degree burns to his arm, torso, and leg.",1
"An employee was operating a powered pallet jack and began to walk backward. After several steps, he backed into a support beam for poultry processing equipment. The load then moved forward and the handle of the pallet jack struck the employee's abdomen. The employee's stomach was injured and he required surgery.",1
"A labor crew was working to disassemble some empty spools that were positioned on the ground. As the middle bar on a spool was being removed, the 7 ft. top section of one of the spools tipped over. It struck one of the employees and fractured their right tibia and fibula.",1
"A mechanic was walking outside a building when he tripped on a mooring cable, fell on the concrete floor, and sustained a fractured right femur.",1
"On May 6, 2021, an employee was being trained on a press. The washers on the press arm kept falling down. The machine cycled while the employee was trying to wipe the area where the washers were. The employee's finger was caught between the press arm and the motor resulting in an amputation to the left index fingertip.",0
An employee was using a utility knife to cut a plastic fender when the knife slipped and amputated their middle fingertip.,0
"A stunt performer was performing a fast rope descent sequence. He fell, landing on a rooftop 8-10 feet below and suffering a broken lower-back vertebra. He was hospitalized, requiring surgery.",1
Two employees were working to cut and remove a 12-inch neck flange and replace it with a pipe section. Both employees pulled the flange out. The 50 to 60 pound flange then pinched and amputated the right middle fingertip of one of the employees.,0
An employee was trying to free a stuck anchor bit and his head was hit above his left eye resulting in a fractured orbital socket.,1
"At a delivery site, a driver stepped out of a truck and onto uneven ground/a pothole. The employee fell backward and sustained a fracture to the lower back and a dislocated finger.",1
"On May 6, 2021, while walking through the warehouse an employee tripped on a 3-inch angle iron that was mounted to the floor, and sustained multiple fractures in their right leg. The employee was hospitalized.",1
An employee and co-worker were teaching students how to perform breakdancing. The employee performed a head stand and lost consciousness when they stood up. The employee struck their head on the floor and was hospitalized for a head injury.,1
"An employee's thumb was caught between a rack and a cart, causing an amputation.",0
An employee was using a hydraulic arbor press and amputated their left index finger.,0
"An employee was walking from a hospital to a health center  when the employee tripped and fell, resulting in a broken tibia.",1
An employee was attempting to blow dust from a machine. The air hose got stuck in the machine and as the employee went to retrieve the hose from the machine the saw blade partially amputated their right middle finger. The entire finger was medically amputated.,0
An employee was walking on a ramp into a building when they tripped and fell and broke a bone in the arm/shoulder area.,1
"An employee was on a truck bed, helping unload slabs of quartz. The truck moved and the slabs turned, crushing the employee's left leg. The leg was amputated.",1
"An employee was performing maintenance on a 1600mm buncher when they were struck by a part of the machinery, resulting in a fractured ankle and head laceration.",1
"An employee was cutting wood with a table saw when his glove got caught in the saw and his hand was pulled into the saw, resulting in a partial amputation of his left thumb.",0
"An employee and a contractor were inspecting a roof to verify areas in need of leak repair when the employee stepped through a skylight and fell approximately 20 feet to the floor below, resulting in multiple fractures to their skull, arms, and upper body.",1
"Two employees were holding a drain grate, preparing to lower it into the frame. The grate was dropped and it caught the two middle fingers on an employee's right hand against the frame. The fingertips were amputated to the first knuckles.",0
"An employee was walking through a dining room when they slipped and fell on something wet on the floor, resulting in an injury to the right side of their pelvis.",1
"An employee was forming a part on a brake press machine and as the part formed, his thumbs were pinched between the part and the dye. The employee suffered two partial thumb amputations.",0
"A roofing service technician was walking on and inspecting a clay tile roof and gutter system. He lost balance and fell from the roof to the ground, sustaining a broken right wrist and a broken left leg.",1
"An employee was inserting webbing material into a blocking machine. The machine suddenly increased speed, and the employee's left hand was pulled between its rollers. The employee's pinky fingertip was amputated.",0
An employee was cutting a tree limb with a chainsaw when the chainsaw kicked back and lacerated his left arm.,1
"An employee was plugging and unplugging refrigerator units onboard a vessel when they stepped through a door and into an open hatch, falling 12 feet and resulting in a fractured femur and ankle.",1
"On 3/24/2021 at 4:01 p.m., an employee was on a ladder fixing an overhead condensing unit when the employee stepped onto a nearby stainless steel table and the table flipped over, causing the employee to fall 4 feet. The employee suffered injuries to their right rib area. On 5/7/21 at 8:59 p.m., an employee was checking sprocket teeth for the chain underneath a bread slicer. The employee lost their balance and the tip of their left index finger got caught between the chain and sprocket, resulting in a fingertip amputation. 

Note to user: This record contains two separate events that were reported simultaneously to OSHA by the employer. These events are captured as one report.",1
"The injured employee was pulling a sheet rock cart loaded with 8 cement boards while another employee was pushing it. A tire went off the sidewalk and the cart was about to tip over. The injured employee slipped in ""sand"" trying to move out of the way and the cement boards fell on top of the employee. The injured employee was hospitalized with a fractured ankle and a lower back injury.",1
"An employee was walking towards a vehicle used for transporting dogs. Dogs were running to load up and one of the dogs ran directly to the employee. The employee turned to avoid a collision with the dog. When she turned, she fell and fractured her left hip on the ground.",1
"An employee was helping a maintenance worker install the upper portion of a coil car back into place using a hoist. This part weighs about 1,000 pounds. While seating the upper section onto the mounting bolts, the employees were working to loosen a bolt. The injured employee’s right hand was on an impact wrench and his other hand was on the nut. As it was loosening, the upper portion of the coil unit came loose and caught the injured employee’s hand against the lower portion of the coil block. The injured employee sustained crushing injuries and an amputation to the middle finger of their left hand.",0
"While operating a planer saw, an employee's thumb was amputated by the blade.",1
"An employee was tearing sheetrock out of a home when they were bitten by a spider, resulting in arm swelling.",1
An employee was using a portable shear to cut metal banding off a fiber bale. The banding struck the employee causing a laceration to their right arm that required hospitalization.,1
"Two employees were operating a label machine when a label got stuck on a paddle. While removing the stuck label, the machine was turned on and pulled an employee's right arm into the point of operation. The employee sustained a crushing injury, loss of skin tissue, and may have tendon damage.",1
"An employee was standing at the back of his work truck. A vehicle swerved and hit the work truck, causing the employee to fall to the ground. He suffered a broken right wrist and head lacerations and was hospitalized.",1
"An employee had been running a weave machine which makes chain link. The employee made an adjustment by tightening a chain to a gear and then went to lunch. Upon returning from lunch, he turned on the machine and noticed the guard on the back of the machine was on the floor. The employee picked up the guard to put it back in place. The gear pulled in his gloved left hand and amputated the pads of the two middle fingers.",0
An employee suffered a fingertip amputation of their right-hand pinky finger.,1
"An employee was submitting samples to the analytical lab. While trying to balance and pick up sample containers, the employee placed their hand on the hinged side of a doorway. The door closed on their finger and partially amputated the fingertip.",0
"An employee was installing a security camera while on a combination ladder. The ladder tipped over and the employee fell about 6 feet, landing on his right arm. The forearm was broken and an artery was severed.",1
"An employee was placing a box on a shelf in the production room when they tripped over another box on the floor, resulting in sprains to their right shoulder, elbow, and thumb.",1
An employee was picking up a job box from the ground. The job box tipped over and fell on him. The employee sustained a fractured hand and leg.,1
Two employees were charging a tank with urea and formic acid. The employees were exposed to formic acid vapor and lost consciousness. One was hospitalized.,1
"On 5/08/2021, at 1:30 PM, an employee was starting the sanitation prep for a corn mill mixer. The employee opened the bottom side of the mixer inspection door to remove product and the auger caught her fingers causing an amputation of the left middle finger at the first joint, and a fracture of the left index finger at the first joint.",0
"An employee was moving to unhook the dolly from the lead trailer when the trailer pulled forward and the dolly struck the employee, resulting in a facial fracture.",1
An employee's middle finger on the left hand was caught in an X-ray conveyor belt resulting in a fingertip amputation below the fingernail.,0
An employee was making adjustments to a limit switch located inside the slide gate electrical box. The motor actuated and his hand was caught between the chain and the sprocket. The employee sustained a laceration to the right hand that required stitches and hospitalization.,1
"On May 8, 2021, an employee threw a 5-pound garbage bag into a garbage container and felt a pop in her back, resulting in a back strain.",1
An employee was troubleshooting electrical issues on a piece of equipment when an arc flash occurred. The employee was hospitalized with second degree burns to the face and top of the head.,1
An employee was removing chain links on the carriage assembly of a drive motor. The carriage dropped approximately 20 feet after links were removed and pulled the employee's fingers into the chain and sprocket assembly. The employee's thumb was broken and their left pinky finger was amputated.,0
"An employee closed their car windows due to rain. When they entered the lobby from the outside, they slipped and fell to the floor, resulting in a left knee injury that required hospitalization.",1
"The injured employee and a co-worker were loading a cart with corrugated roofing material. The cart tipped over and the merchandise fell, striking and fracturing the injured employee's leg.",1
"An employee installed two 30-amp bus plugs and a 200-amp bus plug. While drilling through the cabinet with a hole saw to install conduit, the hole saw made contact with two phases of the bus, causing an arc flash/blast. The employee sustained electrical burns to the torso, arms, and head.",1
An employee slipped on a wet floor while cleaning a restaurant kitchen. The employee suffered a broken ankle.,1
An employee was changing a circuit breaker fuse when an arc flash occurred. The employee was hospitalized with second degree burns.,1
"An employee had climbed onto a hydraulic platform floor lift to move jammed material. While the floor lift was moving up, the employee stepped off the lift and his foot was caught between the floor of the lift and the metal plate on the floor above. The employee was hospitalized with a crushing injury to his foot and toes.",1
An employee was operating a ride-on pallet jack. He ran into racking and his foot was cut open.,1
"An employee slipped and fell from the truck while climbing into a delivery truck. The employee struck their head, sustaining injury.",1
"An employee was repairing a truck-mounted steam cleaner. Steam coils overheated and exploded, causing burns to the employee's face and scalp.",1
"An employee was clearing a paper wrap in the upper embosser roller and lower pressure roll on the rewinder section of a line. The machine was jogged and the employee's left hand was caught in the point of operation. The employee suffered amputations to the ring and middle fingertips, losing skin, the middle fingernail, and the fingertip pads. There was no bone loss.",0
An employee was working to free a truss on the exterior of a building that was hung under one of the rollers of the finish conveyor. The finish roller conveyor was put into reverse and the truss moved backward causing the employee's leg to get caught between the truss and rollers. The employee was hospitalized with a fractured left leg.,1
"A temporary employee was manually rolling an 8-inch pipe to the end of the pipe rack when the pipe rolled over his thumb, breaking it. The left thumb was medically amputated at the middle joint.",0
"An employee was exiting out the back of a tractor trailer. The employee slipped and fell to the parking lot, suffering a possible broken hip.",1
An employee was moving a sawhorse when it tipped over and smashed the employee's left ring finger. The employee suffered an amputation.,0
A Glacier Construction crew was setting a 36-inch steel pipe in a trench and working to line/plumb the pipe. The bracing on the pipe gave way and an employee was trapped between the pipe and the trench wall. The employee sustained a chest contusion and a liver hematoma and was hospitalized.,1
"An employee was unhooking a trailer from a truck cab. The cab ran over the employee, who suffered foot and face fractures.",1
"An employee stepped out of a delivery truck via the driver's side door and suffered a broken ankle as he stepped onto the pavement. He was hospitalized, requiring surgery.",1
An employee was walking out of the breakroom when they stumbled and fell into the door jamb resulting in a concussion.,1
"An employee was using a 3,500 PSI power washer. The hose developed three pinholes, and high-pressure water punctured the employee's hand.",1
An employee was walking in the hallway when he slipped on water that was on the floor and injured his right ankle.,1
An employee was setting up a display when they caught their foot on the fixture and fell to the ground. The employee sustained a broken wrist.,1
An employee was changing a valve on a propane cylinder. The old valve that was being removed sheered off and the employee's finger became caught in the de-valver. The employee sustained an amputation to the left index finger.,0
An employee was testing vehicles under high voltage and sustained an electrical shock.,1
An employee was stacking lumber and the lumber pinched their finger against a back stop. The employee sustained an amputation to a fingertip.,0
An employee picked up a case of water bottles and felt pain in his back.,1
"The injured employee was standing on the right side of his powered industrial truck (PIT), filling out a dock door checklist and using the PIT seat as a writing surface. His PIT was parked at an angle in front of a dock door. Another PIT was driving forward with two pallets loaded on its forks. The moving PIT struck the injured employee's stationary PIT which caused the injured employee to fall on the floor. The injured employee sustained a laceration above the left heel and a fractured left ankle.",1
"An employee was operating a continuous gutter forming extruder machine when he noticed a jam. While working to free the jam, the employee sustained a degloving injury to their left index finger.",1
An employee was hospitalized with a fractured knee after they slipped and fell in the parking lot.,1
"An employee was working from a Baker scaffold to put in studs. The scaffold was bumped and one of its wheels fell into a hole. It then fell over, and the employee fell to the ground 6 feet below, suffering a possible fracture. The employee was hospitalized.",1
An employee had been operating a string trimmer. The employee tripped and fell on the ground and sustained a broken lower leg.,1
An employee was moving a patient on a medical table when they tripped over the table's wheel and fractured their femur.,1
An employee was using a chain hoist to lift a mattress from a lower floor. The employee fell through a hole in the floor he was working on and impacted a concrete floor that was 18 feet below. The employee sustained a broken wrist.,1
An employee was driving a pallet jack when the back of his pallet jack was struck by the forks of another pallet jack. The employee sustained a broken left foot.,1
An employee was operating a punch press and amputated four fingers on their left hand.,0
"An employee was working on an HVAC unit on top of a ceiling. The employee fell through the metal trusses, then fell 7-8 feet through a drop ceiling, landing on the floor. The employee suffered back contusions.",1
A maintenance employee was repairing a packing machine. The employee was under the machine when it cycled. The employee's right hand and forearm were caught and crushed by the counterweight of the cullet chute and the motor housing.,1
"An employee was operating a skid steer loaded with a jackhammer attachment. He had lifted the attachment up over the seat when it broke off from the loader and fell on his leg. His right leg was broken below the knee, and the skin was punctured.",1
"An employee was driving a powered industrial truck in a warehouse freezer. The truck struck a corner guard, and the employee's right leg was caught between the truck's steel platform and the fixed steel baseboard of a racking system. The employee suffered an open fracture near the end of his right tibia.",1
An employee was stepping down from a 4-foot stepladder. He fell and suffered a broken leg.,1
"An employee was working on a bus. The bus slid off the jack it had been raised on and landed on the employee's inner thigh, injuring it.",1
An employee was standing above a trench as a storm water line was being installed. A trench box that was chained to an excavator tipped over while being moved. The trench box struck the employee and pinned them against the ground. The employee was hospitalized with a fractured pelvis.,1
"An employee was spotting a dump truck carrying fill material. The truck's bed was extended to its full height to dump the load. The truck then began to move forward, toward overhead electrical lines. The truck contacted the lines while the spotter was touching it. He was shocked and suffered burns to the arm and back.",1
"An employee was closing a small vault door. The door caught the employee's thumb, causing an amputation.",0
"The injured employee had been working on the roof of a  building. The employee was getting off the roof and onto a 10-foot ladder to get down, while another employee held the ladder. While going down the ladder, the injured employee lost their footing and fell about 10 feet onto the dirt, landing on their left side and sustaining a broken left humerus.",1
An employee was on lunch break sitting on the grass near the driveway at a job site when a truck ran over both of the employee's legs and fractured them.,1
An employee was rolling an 800-pound reel of aluminum into the storage area when his left index finger was caught and amputated between two reels.,0
An employee was performing maintenance on a floater machine and was struck in the face by a spring-loaded latch. The employee suffered a broken nose and facial fractures.,1
An employee lost balance and fell from an unknown height on a three-leg ladder. The employee sustained a fractured ankle that required surgery.,1
"An employee was picking up construction debris and loading it onto a hand truck. The employee suffered a pinched nerve in the back, as well as a slipped disk.",1
An employee was performing maintenance on an unloading machine when it started up and the pusher bar activated and fractured both of the employee's legs. The employee was hospitalized.,1
An employee was removing a box that had fallen off a conveyor when his leg was caught in the conveyor chain. The employee was hospitalized with a laceration to the lower left leg.,1
"An employee was finishing the prep work on a mold in a low-pressure tilt machine. The machine started up and cycled, causing amputation and crushing injuries to the employee's fingers and hand.",0
An employee was chipping concrete with a pneumatic chipping gun and pinched their middle finger between the chipping bit and the concrete substrate.,1
An employees hand was caught in the door jamb as the door closed and the top part of the employee's finger was amputated.,0
"On May 11, 2021, an employee was using a hammer to adjust a slipping agitator belt on the filler head of a machine. The employee's right middle finger was pulled between the belt and pulley resulting in a fingertip amputation.",1
An employee injured their lower left back while pushing a patient in a wheelchair. The employee was hospitalized.,1
"On May 11, 2021, an employee was working on a yacht, doing maintenance work on an air conditioning unit. A refrigerant tank fell over and began to leak. The employee covered the leak, and the refrigerant caused second-degree burns to both of his hands.",1
"An employee was riding a bicycle. While still on the property at a crossroad, she was struck by a car. The employee sustained fractured ribs, a fractured clavicle, a fractured nose, and bleeding in the brain.",1
An employee was walking through a post office when they tripped and fell to the floor. The employee was hospitalized with broken bones in the right knee.,1
"An employee was on top of a trencher to put a cover on its exhaust manifold when he slipped off the trencher and fell 5.5 feet to the ground, resulting in five broken ribs, a lacerated spleen, and a lacerated liver. It was raining at the time.",1
"An employee was using a floor shaper to put a radius on plastic parts. When placing a part into the shaper bit area, the part kicked and dragged the employee's left hand into the shaper. The employee sustained a partial amputation of the left middle finger and lacerations and avulsions to the left ring finger.",1
An employee was using welding equipment. Residual solvent fumes ignited and the employee was hospitalized for burns.,1
"An employee was walking up a set of stairs and was inspecting welds on a handrail where a platform was going to be installed. At the transition where the stairway lead to the next flight of stairs, the employee fell and landed on the floor below, sustaining injury to the back and arm.",1
"An employee was cutting tree limbs when one of the branches fell, ricocheted off something, and struck the employee in the head. The employee was hospitalized with a large gash on their head and a possible back injury.",1
"On May 11, 2021, an employee was operating a pedal-operated brake press, and was feeding sheet metal into the press. Both of their hands were caught in the press, resulting in amputation of the right index finger and possibly crushed knuckles on both hands.",1
"While walking down stairs in a client's home, an employee tripped on a pair of shoes and fell 2 to 3 steps, landing on the base of a child's car seat. The employee sustained a broken right femur.",1
An employee was connecting a tractor to a trailer. The employee got out of the truck to check the connection and his right arm was caught between the fifth wheel and the trailer and fractured.,1
An employee was helping to pick up trash from the side of the street. Their right index finger was fractured by the lifting mechanism on the trash truck. The employee was hospitalized and required surgery.,1
"An employee was removing some equipment on a job site. While climbing a ladder, the employee fell 10 to 12 feet and landed on the left side of their back. The employee was hospitalized.",1
An employee was unjamming a machine. The machine jolted and struck the employee resulting in lacerations to their left hand and bottom lip and a dislocated shoulder.,1
"An employee was bending down to pick up some studs near a ladder. Some sheetrock another employee (working 12 feet up the ladder) was holding slipped down and hit the employee as he bent over, striking and bruising his back. He was hospitalized.",1
An employee was walking to get a drink. The employee slipped on water that was on the floor near the ice machine and sustained a broken femur.,1
"An employee was testing a winch. When the employee went to wipe the winch with a rag, the rag was pulled in, pulling their hand in as well. The employee sustained a partial amputation to the left middle finger.",1
An employee ran into a fixed desk and fell to the floor. The employee's hip was injured by the fall and required surgery.,1
"An employee was working in a filing room, tripped over a box of copy paper and fell into a filing cabinet injuring her left upper arm.",1
"An employee was in an attic looking for a leak. He fell off a walkway through the attic ceiling, falling about 12-15 feet and suffering cracked ribs, a partially collapsed lung, a concussion, and cuts and bruises.",1
An employee was wiping off an area below a conveyor when their hand became caught in the conveyor belt.,1
"On May 11, 2021, an employee was gathering bad straws from a drop chute to throw away. The machine restarted and his finger was caught between a groove on the transfer belt and a metal piece on the machine. The employee sustained the amputation of his left ring finger.",0
"On 5/11/21, four filler operators were performing a changeover on the filler. The injured operator entered the filler to change chucks using portable steps with a handrail. Another operator was walking up and down the steps handing parts for the changeover. When the injured operator exited the filler using the seal of the door and stepped forward onto the portable steps, the steps slid causing the injured operator to fall back next to the filler. The injured operator hit their head on the filler door and then on the floor three feet below. The operator was hospitalized for a concussion.",1
"An employee was on a ladder wiring an overhead fan and fell 5 feet off the ladder onto the ground. The employee suffered pain in the back, neck, and right arm.",1
An employee was leaning against a handrail when it broke and the employee fell to the walking surface. The employee suffered bumps and bruises.,1
An employee was operating a drill machine to drill pairs of holes into wooden boards. The employee noticed that the board was not correctly positioned and tried to move it with their left hand while at the same time lowering the lever used to lower the hold-downs/drill bit pairs with their right hand. The board would not move and their left hand slid along the board to one of the drill bit pairs. A drill bit caught the employee's glove and pulled a finger into the drill bit resulting in a fractured finger and partial amputation.,1
An employee was operating an electric pallet jack and pinned their left leg between the pallet jack and a floor scrubber. The employee's leg was fractured.,1
"An employee was working on a circular saw, cutting cold steel bars. A bar got caught and the employee reached to help release it. The circular saw cut the tip of the employee's right middle finger, causing an amputation to the fingertip.",0
"An employee was loading a tandem dump truck with road base material. Some of the load had been dumped so the truck would not be overloaded, and material had collected under the tailgate, preventing it from closing. As the employee tried to clear away the material, the employee's right middle finger was caught between the tailgate and the tailgate latch. The fingertip was amputated at the first knuckle.",0
"An employee was packaging boxes on the gallon production line and moving them to a skid. While relocating a box of product to the skid, he felt a pull in his arm. He was hospitalized for a swollen right wrist.",1
An employee was putting a package into a plastic bag to put over the fence for delivery when a dog came out from behind the garbage carts and bit her right thumb. Her right thumb was amputated to the first knuckle.,0
An employee tripped over a bag of potting soil in the garden center.,1
"An employee was carrying a 5 gallon bucket of 50% hydrogen peroxide solution when the handle broke or he dropped the bucket and the solution splashed onto him. He experienced chemical burns on his left arm, chest, left shoulder, and just above the left eye. He was hospitalized for burns as well as inhalation of vapors and ingestion of liquid solution.",1
"After participating in a physical training exercise, an employee began to lose feeling in his lower extremities. He was hospitalized, having suffered bulging disks, an annular tear, and a muscle injury.",1
"On May 12, 2021, at around 8:45 a.m., an employee was installing a cutting head into a molder machine when the cutting head slipped from his hands and the blades cut his hands. The employee was hospitalized.",1
"On 05/12/2021, at approximately 8:52 AM, an employee of Petrin Corp. was on an elevated, grated platform at a chemical plant replacing a removable barricade with a hard barricade when he tripped, lost balance, and fell approximately 20 feet. The employee sustained fractures to a hip, the right arm, and the right wrist.",1
"An employee was working on scaffolding when they fell 4 feet to the ground, resulting in a fractured right leg.",1
An employee was moving a roll of paper (approx. 72 inches in diameter and weighing 400 lbs.) it rolled onto the employee's left leg and fractured it.,1
"An employee was hooking up a washing machine to be tested. The employee touched two live wires and suffered a shock to the entire body, as well as burns to both hands.",1
"On May 12, 2021, an employee was attending quarterly firearms training when her 9mm discharged into her right thigh and exited out of her lower right leg.",1
"An employee was cleaning dust off the photo eye of the dump hopper when it activated and caught  his left arm between the dump hopper and the frame of the machine. The employee sustained a left ulnar fracture, an elbow wound and traumatic muscle injury.",1
An employee was laying hot asphalt during road construction and was standing on the rear catwalk of a laydown asphalt paver operating the controls. A subcontractor dump truck backed into the paver and pinned the employee between the paver controls and the dump truck. The employee suffered bruises and internal bleeding to both upper legs.,1
"A warehouse coordinator was receiving skids of product (tiles) while a forklift operator was putting the skids back into the staging lanes. While placing the skids of tile, the skids fell on top of the warehouse coordinator who suffered a broken pelvis and five broken ribs.",1
"An employee was feeding strands of aluminum conductor steel-reinforced wire into a chopper machine. A strand tangled up in the machine, which jammed. The employee disengaged the feed rollers and was trying to free the tangled wire when the end of it sprung back, striking him in the left eye. He lost the eye.",0
An employee was carrying trash outside to the burning pit using a forklift. The forklift got stuck in the mud outside and the operator asked another forklift operator to pull the stuck forklift out of the mud. The second forklift was backing up to the stuck forklift to attach a chain. The injured employee was holding the chain and while the second forklift backed up and the employee's left arm was crushed between the two forklifts resulting in amputation of the arm.,1
A turret on a piece of trimmer equipment was being manually rotated into position while offline. An employee was helping move the turret when a pinch point on it caught his right hand. He suffered an amputation to the ring fingertip.,0
"Two employees were operating forklifts in a freezer. One forklift stopped to let the other go by. One of the forklifts slid on the icy floor and its forks struck the left calf of the other forklift's operator, fracturing their shin.",1
"An employee was loading a heat press machine. The employee's left hand was caught in the machine, which caused third-degree burns to the lower arm and the back of the hand.",1
"Two employees fought. One punched the other, breaking the employee's jaw. The employee was hospitalized.",1
"An employee was cleaning the rollers on a roll coating machine. His hand was caught in the rollers, causing the amputation of a finger.",0
An employee was picking up cardboard and plastic from the floor when he stepped on the plastic he was carrying and fell. The employee suffered a fractured ankle.,1
"An employee fell on a wet floor, suffering back and neck injuries.",1
"An employee was trying to remove a floor truss from a table when the table closed. His left middle finger was caught in the table, and the fingertip was amputated.",0
"An employee was standing on a metal roof installing insulation. He stepped backward onto a skylight and fell through it 35 ft. to the concrete ground, resulting in bruises and a fracture.",1
"An employee was using a 6-foot fiberglass ladder to hang a banner above an entry door. After he completed work on the banner, he descended the ladder and was approximately four feet high when he lost his balance and fell onto the entryway. The employee sustained a fractured L1 vertebra.",1
"An employee was on a manlift, waiting for a piece of metal that a crane was lifting to be put into place. The crane ball hung up and the load dropped quickly, striking the employee in the face. The employee suffered facial fractures.",1
"Employees were cleaning out a heater treater using hot water to remove debris. When an employee opened the door to the heater treater, remaining hot water hit him in the face, chest, and hands, causing first- and second-degree burns.",1
An employee's right hand was caught and crushed in the pulley of an asphalt conveyor.,1
"An employee was helping perform an inflatable line stop. During the line stop installation, the launch tube slid into the open valve, pinching the employee's left thumb between the locking clamp and the set point stopping block. The thumb was broken and lacerated.",1
"On May 13, 2021, an employee slipped and fell while waking down the 1st floor aisle near the Oak Room. The employee bumped their head against the wall as they fell and was hospitalized.",1
"A nursing assistant was helping to recline a resident's wheelchair. When she pulled back on the wheelchair, she lost her balance and fell to the floor, suffering a broken left femur that required surgery.",1
"An employee was trying to dislodge a material truck cart in an automated storage and retrieval machine. The employee dislodged the cart and was struck by the pusher arm, suffering a broken leg.",1
An employee's left hand was caught in a meat grinder. The hand was amputated.,1
Employees were removing dies from a press. The injured employee was guiding a suspended die set by hand to ensure proper placement on the skid when the employee's gloved fingertips were pinched between the upper and lower dies of the blanket die set as it was lowered by a hoist onto a skid. The  employee's left middle and ring fingertips were amputated.,0
"On May 13, 2021, at approximately 8:00 PM, an employee was operating a stand-up forklift and was backing away and turning from a pallet. The forklift struck a steel structural pole and the employee sustained compound fractures to the left tibia and fibula.",1
"An employee was driving a cement mixer. It flipped while turning a corner, and the cabin was flattened. The employee was pinned in the cabin and suffered a broken right hand, three broken ribs, and head lacerations.",1
"Two employees were lifting a capstan hoist out of the bed of a truck when it fell, landing on one employee's left middle finger and causing a partial amputation.",0
"An employee was trimming trees from a stepladder. The employee fell to the ground, suffering broken ribs and other internal injuries that necessitated emergency surgery.",1
An employee was pressure washing interior concrete walls to remove existing liner and lacerated the top of his left foot.,1
An employee suffered a strained back while pulling a 44-gallon drum that was half filled with water.,1
An employee was trimming excess leather from a boot on the inseam trimming machine when the workpiece slipped and his right index finger contacted the blade resulting in a partial amputation of the fingertip.,0
A forklift struck an employee.,1
"An employee was using a piece of emery cloth to polish a metal part that was rotating on a lathe. The part caught the employee's glove, and the lathe broke the employee's right forearm.",1
"On 5/13/2021, an employee was operating the silk screen machine. The machine was running while she adjusted the wheel nut with a wrench. The slide activated to the right and amputated her right middle fingertip.",0
"An employee was driving a golf cart when it hit a speed bump. It flipped over and the employee suffered broken ribs, a punctured lung, and broken lower back disks.",1
An employee's gloves were caught in the chain and sprocket on a conveyor resulting in amputation of the right middle fingertip.,0
An employee was investigating a noise coming from a guarded gearbox on the backside of his machine. He was moving a loose grease line when his finger slipped into the chain and sprocket located in the box resulting in a partial amputation of the left index finger.,0
An employee was working on top of a roof near a belt pulley. The pulley drifted out of place and fell on his right hand crushing the fingers and causing a partial amputation of his pinky finger.,1
An employee fell from a height.,1
"An employee was operating the shop blaster. The employee was working at the rear of the machine. As he moved toward the front of the machine, he tripped over a pallet and fell on the pallet. The employee sustained a broken right femur, broken ribs, a punctured lung and a fractured shoulder.",1
An employee tripped while exiting a waste collection vehicle. The employee suffered a compound ankle fracture.,1
"An employee was holding a sheet of metal to cut for the controller box. The sheet metal slipped from his hand while using a 4"" hand grinder and sliced a finger on his left hand. The employee was hospitalized for surgery.",1
"The injured employee was training another employee and they were heating and pouring zinc into wire rope sockets (spelter sockets). The injured worker stepped backward, lost his footing, and fell  into the hot kettle, knocking it over. The employee sustained a third degree burn on his back that required hospitalization and surgery.",1
"On May 13, 2021, an employee was operating an overhead crane to move a 2,980 lbs. chip hopper. The hopper was approximately one inch off the ground while moving it. The hopper rotated and caught the employee's foot against the hopper frame and concert ramp resulting in a fracture and laceration to the foot.",1
An employee was carrying plastic boxes and tripped over a purse that was on the floor. She sustained an injury to femur and hip that required surgery and hospitalization.,1
An employee was clearing a re-grind blockage when the rotary valve amputated his right index fingertip.,0
"An employee was climbing a fixed ladder. The employee fell to the ground, suffering a broken heel that required surgery.",1
"An employee was working at a printing press. The employee was checking T-shirts and ink between two pallets when the machine was shifted, crushing and breaking the employee's right arm.",1
"Employees were installing a culvert. Dirt picked up in an excavator bucket loosened and fell onto an employee's back, causing a fracture.",1
"An employee was unloading a truck. As the employee came down the ramp with a box spring, he fell from the ramp to the floor. He suffered a laceration to his left lower arm and a broken left wrist. He was hospitalized, requiring surgery to the wrist.",1
An employee was unloading a truck and crushed their left ring finger between the line and cement bollard resulting in amputation.,0
"An employee fell in an elevator, landing on the floor and suffering a compound fracture of the right arm.",1
"An employee was winching a vehicle onto a rollback tow truck when their finger became caught between the winch cable and the truck bed, resulting in an injury to a tendon in their left middle finger.",1
"On May 14, 2021, at approximately 8:30 a.m., an employee was performing sandblasting operations on the inside rear of a trailer. The trailer was secured to a fixture that allows the trailer to be rotated in order to access different parts of the trailer frame. The counterweight had not been added to the frame or fixture and when the employee began to rotate the trailer, the trailer swung down and collided with their left ankle. The employee was hospitalized for an acute displaced fracture of the left tibia and fibula.",1
An employee was moving material with a walk-behind forklift when his left leg was pinned between the forklift he was operating and another forklift parked behind him. The forks of the parked forklift penetrated his shoe and the employee sustained a fractured metatarsal and laceration on the left foot.,1
An employee was hammering rebar using a sledgehammer in order to construct a sidewalk and struck his right index finger causing a fracture and contusion that required surgery and hospitalization.,1
"An employee was working on a roof, stepped on a plywood sheet, and fell through the roof to the ground resulting in a broken arm required surgery and two fractured discs.",1
"On 5/14/2021, an employee was guiding rubber in the mixing area when their left forearm was caught in the roller of a mixer. The employee suffered a fractured arm and was hospitalized.",1
An employee was cutting 2x6 lumber with a circular saw and amputated their right thumb.,0
"Two employees were moving an axle tube. Employee 1 set down his end of the tube; the injured employee dropped his end. The injured employee's index finger was caught between the falling tube and another tube, and he suffered an amputation to the finger.",0
"An employee was fixing a battery-powered electric gate. After he reinstalled the battery, the gate actuated and his right index finger was caught in the chain and sprocket. The fingertip was amputated.",0
An employee was cleaning an area between silos/platforms. The employee stepped onto an area between silos and fell 10 feet onto enclosed conveyors below. The employee was hospitalized with fractured ribs and a fractured/dislocated shoulder.,1
An employee was changing a font print blanket on a printer when their left middle finger was caught between the blanket drum and the plate drum support resulting in amputation.,0
"An employee was closing the door to a boiler ash discharge. The employee's finger was caught between the door and its hinges, causing an amputation to the finger.",0
An employee was clearing the silo so product would flow freely and suffered the amputation of two fingers.,0
"An employee was on an extension ladder installing a panel and caulking units. The employee fell from the ladder onto the concrete pavement below. The ladder appeared to have struck the employee as it also fell. The employee lost consciousness and was hospitalized for a head laceration requiring sutures, a concussion, and broken ribs.",1
"An employee was picking up a keg of beer in a walk-in cooler. The keg fell over and struck her left leg, breaking the tibia. She was hospitalized, requiring surgery.",1
"An employee slipped while climbing down a ladder and fell about 12 ft. to the ground, suffering a broken left elbow, a broken lower right leg, and a bruised heel.",1
"A transmission fell on an automotive mechanic's right hand, amputating the ring fingertip.",0
"An employee was helping remove a tree stump. Another employee was using a chainsaw, which bounced back and severely lacerated the first employee's right lower leg.",1
"An employee and a co-worker were conducting work on the pipeline right-of-way. The co-worker went across the bridge to help guide the employee as he drove a side-by-side utility task vehicle (UTV) across the bridge. As he crossed the bridge, the boards along the right side began to give way. The employee hit the accelerator, trying to make it across the bridge. He made it across and the UTV veered to the right, ultimately striking a tree. The UTV rode up the side of the tree, coming to a stop while leaning against the tree, and the employee fell out of the vehicle. The employee suffered a broken rib on his left side, a broken sternum, and fractured vertebrae.",1
An employee was using a bun slicing machine and amputated a fingertip.,0
An employee was standing next to a skid of turf on the ground. A forklift picked up the skid and lowered it onto the employee's right foot. The employee was hospitalized for an injury to their toe that required surgery.,1
"An employee had removed a deckle nozzle to change it. It dropped, and as he tried to catch it his glove was caught in the cylinder. He suffered a degloving to the right thumb.",1
An employee was loading pallets into a trailer using a pallet jack and pinned his left foot between the pallet jack and the trailer wall. The employee sustained a fractured left ankle.,1
An employee was spraying down equipment and removing some chicken fat on a shackle when their left index finger was caught in the equipment and amputated.,0
"An employee was selecting items and placing them onto a pallet in the freezer section of the warehouse. He stepped backward to move out of the way of another pallet jack operator and his foot got caught in a pallet causing him to stumble. He then grabbed the pallet jack handle to catch himself, twisted the handle which unlocked it, and the jack rolled and caught his foot between the electric pallet jack and the other pallet. The employee sustained a fractured left leg or foot.",1
"At about 8:45 p.m. on May 16, 2021, an employee opened the lid of a clarifier containing water. Hot water (about 195 degrees F) spilled onto the employee, causing second-degree burns to the employee's chest and stomach.",1
An employee was adjusting wire on a wet lap machine when their left arm was crushed in an in-going nip point.,1
"A mail carrier was walking back to his truck after delivering a parcel. A dog came out of a house through a dog door, attacked him, and knocked him to the ground. He suffered bites to both forearms and was hospitalized, requiring 40 stitches.",1
"An employee was climbing a ladder. The ladder twisted and the employee fell about 12-15 feet, suffering a rib injury, a spine injury, and a bruised lung.",1
"An employee was washing a tank trailer. When he opened the rear discharge valve on the trailer, ethylenediamine sprayed onto his right torso and upper thigh causing second and third degree chemical burns.",1
"An employee was on a 12-foot ladder working on a aluminum roof when he rotated and fell off the ladder, hitting a metal sign with his chest as he fell to the asphalt drive and concrete sidewalk/curb. He sustained fractured ribs and a bruised sternum.",1
"An employee cut into a 55-gallon drum with a plasma cutter. Gasoline fumes in the drum ignited and then flamed out. The employee suffered burns to both shins, as well as a laceration to the right temple from a piece of the drum.",1
An employee was performing catering service to an aircraft and fell between the aircraft and the high-lift truck positioned at the aircraft door. The employee sustained a fractured leg.,1
"An employee was walking toward the time clock, tripped and fell resulting in a right patella fracture.",1
"An employee was pushing a part into a machine. The machine caught the employee's left right finger, causing a crushing injury.",0
An employee was cleaning the blower for a saw and amputated their right index finger.,0
"An employee was adjusting a machine when a rail slid into place. His right middle finger was caught between a piece of angle iron and a strap, and the fingertip was amputated.",0
"An employee was performing quality control on an 8-foot stack of pallets while standing on a 4-foot ladder. The employee was using an air hose to blow dust off of the pallets. The air hose was wrapped around the ladder. When the employee tugged on the air hose, they fell off the ladder onto the ground and fractured their forearm.",1
"An employee was using a circular saw to cut wooden planks into stakes. The saw caught his shirt and was pulled toward his abdomen, lacerating it. He was hospitalized with a 10-inch cut from the right side of his torso to the left side of his navel.",1
"On May 17, 2021, a service technician was using a 6-ft. A-frame ladder to install cable service at a residence when he fell off the ladder and onto the wood floor. He suffered a broken right ankle and was hospitalized.",1
An employee was fixing a vacuum roll on a machine. The employee's left index finger was crushed between the vacuum roll and the table. The finger was amputated.,0
An employee sustained a transient ischemic attack (TIA) while he was in a meeting.,1
An employee had finished delivering roofing materials and was removing a fall protection anchor point when he lost balance and fell to the ground injuring his right side.,1
"On 5/17/2021, an employee was removing a broken harp wire from a giant block of cheese when the employee's arm was caught between the push plate and the frame holding the harp, resulting in an arm fracture.",1
"An employee opened a valve to see if a drum was free of hot residual oil. The oil was plugged behind the open valve, but the plug dissolved. Hot oil (300-400 degrees F) splashed out of the drum's receiving receptacle and onto the employee's right thigh and right arm, as well as the right sides of the employee's abdomen and face.",1
"An employee was servicing a conveyor belt. After greasing the ports and gears, the employee restored energy to the machine. The employee's left hand was then caught between the bottom belt and the pressure roller. The employee suffered a fracture and a tendon injury to the left little finger and a forearm burn.",1
"An employee was troubleshooting a stamper machine. The part-sensing proximity switch was malfunctioning. The employee reached through the part access opening in the guard to adjust the proximity switch bracket. The machine cycled, causing the employee's left middle finger to be pulled between the arbor and the embossing stamper. The finger was amputated between the first and second knuckles.",0
An employee attempted to scrape ground meat from the throat of a meat grinder and contacted the grinder blades resulting in a left middle fingertip amputation.,0
"An employee was working from a ladder, installing a copper welding wire spool. The spool fell and knocked the employee from the ladder. The employee suffered broken left-side ribs and was hospitalized.",1
An employee was trying to clear a jam while walking on a conveyor. His foot got stuck and he fell off the side of the conveyor and broke his leg.,1
"On May 17, 2021, at approximately 12:30 p.m. a letter carrier was delivering mail to a residence when a dog broke free from his chain and attacked her. She sustained a bite on her right thigh and a cut on her head from falling to the ground. She was hospitalized.",1
"An employee was replacing a roof panel. The employee fell through a hole to the ground and some boxes 20 feet below, suffering a broken cheekbone and lacerations.",1
An employee was replacing plates between conveyors when their left thumb was caught in the chain and sprocket resulting in a partial amputation.,0
"An employee tripped over elevated caulking between slabs of concrete and fell to the ground, suffering a broken right femur.",1
"An employee was removing a tree limb. When the limb came free, a tag line that was wrapped around the employee's right arm caused serious rope burns and possible tissue damage to his forearm.",1
An employee was removing a misplaced grommet from the grommet press when their left middle finger was caught in the press and the press activated causing a fingertip amputation.,0
"An employee was opening a freezer door when she lost her grip on the handle and fell to the floor. She suffered a back injury and was hospitalized, possibly requiring surgery.",1
A meat grinding machine amputated three of an employee's fingertips.,1
An employee was operating the hydraulic shear and amputated a fingertip.,1
An employee was checking the roller alignment on a corrugated tubing machine when her left middle finger was caught between a roller and the tubing resulting in a fingertip amputation.,0
An employee fell while walking down stairs from a second floor. The employee struck the ground and suffered a left ankle injury.,1
"An employee was leaving work and walking to her car when she slipped down steps and fell onto the concrete below, resulting in a fractured right wrist and left knee.",1
An employee was welding when there was a dust flash fire and explosion. The employee was burned on the hand and the upper torso.,1
"A temporary employee was on a ladder adjusting the volumetric filler on top of a horizontal form, fill, and seal machine. As she was making adjustments to the brush mechanism, it amputated her left middle and index fingers. The machine was energized at the time of the incident.",0
An employee slipped and fell on the ground. The employee was hospitalized.,1
An employee was unloading trailer. As he stepped out of the trailer and onto the docking plate it came down and struck the employee's left leg and caused a deep laceration.,1
"On May 18, 2021, an employee was servicing a chiller cooling unit. The employee had removed a side cover from the unit to add water when the fan on top of the unit turned on and pulled in his right hand. He suffered an index finger amputation, a possible amputation of the thumb, and a laceration to the middle finger.",1
An employee was walking in the parking lot and fell resulting in facial injuries.,1
An employee was operating a skidder at a logging site in thick brush when the employee's left foot was crushed by the skidder blade.,1
An employee was struck by a customer's car in a store parking lot. She suffered a broken leg and was hospitalized.,1
"An employee was trying to park an electric pallet jack in its charging station. It jolted and pinned his left leg against a wall, breaking the lower leg.",1
"An employee was rolling 12"" pipe from the exit of the large line paint booth to a transfer car. He rolled two pipes by hand onto the transfer car and then rolled the third pipe toward the transfer car. He turned and reached for the fourth pipe when the third pipe began to roll away from the transfer car and pinched his right middle and ring fingers between the two pipes resulting in a partial amputation of the ring finger.",0
"An employee was connecting a wire rope choker to a section of 36-inch concrete sewer pipe. After connecting the choker, a backhoe lifted the section of pipe. As the pipe section was being lifted it began to spin and struck the employee pinning his right leg against a section of stationary pipe. The employee sustained a fractured right femur and lacerations.",1
An employee fell while moving to descend from the third rung of an 8-foot ladder. He landed on the ground and suffered a broken hip.,1
"An employee was cutting bolts from a bridge during a bridge demolition. When the bolts were cut, the employee was pinned between a beam and the aerial lift. When the lift was moved to unpin the employee, they fell to the ground below. The employee suffered a broken leg and pelvis.",1
"An employee was unjamming caps of deodorant sticks from an unscrambler machine when their right ring finger became pinched between the orienting disc and the timing belt of the machine, resulting in an amputation of the tip of the right ring finger.",0
An employee had just finished wiring a junction box for a cooler in a food storage unit. The box was powered on and the employee suffered a 120-volt shock.,1
"An employee was standing on the second step of a step-ladder unhooking a 4-inch hose. After unhooking the hose, the end of the hose caught his glove pulling the employee off the ladder to the deck two feet below the ladder. The hose continued to pull the employee to the ground approximately 2.5 feet below the stepladder. The employee suffered neck trauma and spinal cord swelling.",1
An employee was carrying a large piece of glass during a demolition job. The glass slipped out of his hand and cut his right arm above the elbow. He lost consciousness after receiving the laceration.,1
"An employee was pulling down a garage-style overhead door. The employee's right hand became tangled in the rope tied to the door handle. The metal door track then lacerated the employee's middle finger, causing a partial fingertip amputation.",0
"An employee was aligning supply wood to cut with a handheld saw when the saw jerked, caught the employee's glove, and pulled the employee's left index finger into the blade resulting in a partial amputation.",1
"An employee was cleaning lines when water pressure caused a hose to burst. He was struck on the face, suffering a cheek fracture and cuts from his broken safety glasses, as well as a retinal detachment and bruises to a cornea.",1
An employee was standing in the door of his truck when another truck backed into his truck and pinned him between the two trucks. The employee sustained crushing injuries.,1
An employee was sweeping the floor and was struck by a forklift. This caused the employee to lose his balance and fall to the floor. The employee sustained internal injuries that resulted in the removal of the spleen and a portion of the small intestine.,1
An employee was on a break smoking a cigarette and suffered burns.,1
An employee was assisting a patient having a seizure. The patient began to fall and the employee tried to catch the patient. This resulted in both the patient and employee falling to the ground. The employee fell on and broke both of their elbows.,1
An employee was preparing food using a food processor and amputated their left index and middle fingers.,1
An employee was unloading a dumpster into a bin when the dumpster lid closed on his right hand and amputated multiple fingertips.,0
An employee tripped going over a containment curb and fell. A Unistrut clip caused a laceration and degloving injury to his abdomen.,1
"On May 19, 2021, an employee was standing next to the frame machine as it was being pulled into the stall. The dolly wheel ran over his right foot causing a fracture. The employee was hospitalized.",1
"An employee was cleaning conveyors. His right hand was caught in the ingoing nip point of the tail end rollers. The conveyor pulled in his arm up to the shoulder, injuring the hand, arm, and shoulder.",1
While out on assignment the employee's vehicle stopped working and needed to be towed for repair. The employee stepped out onto the foot hold on his vehicle at the same time the tow truck driver was trying to hook up the boom from the tow truck. The boom device struck the vehicle and the employee slipped from the foot hold and fell onto the street. The employee was hospitalized for a head injury.,1
An employee was assembling a trench shield. Two of the employee's fingertips were caught and amputated between the spreader and the collar.,1
"An employee was beginning to place a load into a furnace for heat treating. The furnace flared suddenly, shooting out flames caused first- and second-degree burns to the employee's head, lips, and ears.",1
An employee was clearing a jammed board in the planer mill and contacted the cutter head resulting in amputation of their left index finger at the first joint.,0
"An employee was participating in field training which consisted of various physical activities including running, lifting, and carrying objects. Just prior to the lunch break the employee felt dizzy, was checked out on-site by medics, and was given the OK to proceed. Later in the day, the employee began to feel chest pains and was hospitalized due to dehydration and a muscular injury.",1
An employee was operating a table saw and amputated a finger on their left hand.,0
"An employee was using a power washer to clean a cement mixer. He fell, hitting his head on the way to the ground and suffering a head laceration and a concussion.",1
"An employee was working on a machine when his right hand was caught in a nip/pinch point. Fingers on the hand were injured, and the index fingertip was amputated.",0
"An employee was driving a stand-up powered industrial truck (PIT) to the charging station and struck a cement reinforcement barrier. The employee was pinned between the PIT and the cement reinforcement barrier, resulting in the amputation of their lower left leg.",1
An employee was removing a sheet of glass from a window sash when the glass slipped and the employee suffered a deep cut to his right leg. The employee was hospitalized and had surgery.,1
An employee was operating a brake machine and amputated their left thumb.,0
An employee was operating a laminated fabric machine when their left arm was pulled into the winder causing a crushing injury.,1
"On May 19, 2021, an employee was responding to a road call and had just arrived at the scene. He fell as he stepped out of the tractor cab and he landed on the ground, suffering a hip fracture.",1
A Swissport employee bumped into another employee while standing up after picking up aircraft wheel chocks and fell to the ground. The injured employee sustained a broken left arm.,1
"An employee was repairing a sand blaster machine. After the sand blaster was reassembled, the employee then turned on the generator to check the pressure. The employee went back to check the drum and air was escaping. The employee noticed that the hose was slipping off. The employee grabbed the hose and it slipped off and struck the employee on the left side of the head resulting in a laceration and a swollen left eye.",1
"On May 19, 2021, an employee was throwing away a display into the top of the dumpster when he slipped and fell off of the dock ledge to the ground about 3.5 to 4 feet below. He suffered a fractured femur and was hospitalized.",1
A team member was stepping down from a stand and missed the last step. Her ankle rolled and fractured. The employee was hospitalized and had surgery.,1
"A welding technician was installing hydraulic packing cylinders for an Automate Side Loader (ASL). The cylinder was on a stand. When the employee attempted to move the cylinder it slipped and fell on the employee's finger pinning the employee's hand against the front part of the truck body. When the employee tried to remove their hand from under the cylinder, their right ring fingertip was amputated.",1
"A molder machine jammed and was turned off. Its still rotating knives caught an employee's hand, causing the amputation of the index finger.",0
An employee was making a delivery to a customer location. The employee's foot was caught between the truck's liftgate and the rear bumper as the liftgate was raised causing a crushing injury to his right big toe.,1
An employee was grabbing a package from a shelf in a freezer. A forklift backed over her foot. One of her toes was amputated.,0
An employee was winching a truck onto a flatbed hauler. The winch cable snapped and the employee suffered a left knee injury that required surgery.,1
An employee was ripping 2x4 boards on a table saw. A board kicked back and the employee's left hand contacted the blade. The employee sustained a fingertip amputation.,0
"An employee was attempting to clear the air lock by scooping the feed down with a grain shovel. While standing on the pile of feed, he lost his balance. As he went to catch himself, his hand was caught in the air lock resulting in a broken thumb/hand.",1
"A temporary employee was cleaning an airlock from on top of a pile of feed. He began to fall, and his hand was caught in the airlock as he tried to catch himself. He suffered a broken thumb.",1
"An employee was doing remediation work following a water loss in a mobile home. The employee fell through a water-weakened spot in the OSB subfloor to the ground under the trailer, about 10 feet below. The employee was hospitalized.",1
Two employees were involved in horseplay while walking when one employee fell and struck their head on the concrete floor resulting in a concussion.,1
"An employee slipped and fell, breaking his left hip and leg.",1
"An employee was walking behind a forklift when it ran over the employee's foot. The employee suffered four broken toes, a dislocated right ankle, and a laceration.",1
Employees were lifting up a generator from a pallet using a forklift. The straps securing it slipped off the forks. The generator flipped and pinned an employee against a fence. He suffered back and rib injures and a stomach contusion.,1
An employee was trying to retrieve a piece of meat lodged in a conveyor. The conveyor belt caught the employee's left hand. The hand was amputated.,1
"An employee was trying to clear asphalt from a tailgate latch. He had used a shovel to pry the gate open; the shovel slipped while his hand was between the tailgate and the truck bed, causing a fingertip amputation.",1
A nurse responded to a small fire caused by a patient and then suffered a heart attack.,1
An employee was unloading materials from a truck. Their leg buckled while lifting the materials and the employee's lower leg was fractured.,1
An employee was cutting wood on a table saw when the wood kicked back and knocked the employee's hand into the saw blade. The employee suffered a severe laceration to the left hand and an amputation to the left index finger.,0
An employee was in the pig pen when the animals started fighting. One pig was on top of another when it rolled off and onto the employee's right ankle fracturing it.,1
An employee's left little finger was caught in a door jamb as the door closed. Her fingertip was amputated.,1
An employee was closing room partitions and caught his finger between the partitions resulting in a partial amputation.,1
"An employee was moving freight inside a trailer for delivery. The employee fell off the truck's lift gate to the ground, suffering fractured vertebrae.",1
"An employee was cleaning up a yard. Some debris fell into his boot. He sat down on some stacked steel plates to remove it; a plate rocked, and as he tried to brace himself his left ring fingertip was amputated between two of the plates.",1
A meat grinder blade amputated an employee's index fingertip.,1
One employee struck another employee in the face with a closed fist causing him to fall to the ground. The injured employee sustained a broken nose and a brain contusion and was hospitalized.,1
An employee inhaled low-foam acid fumes while cleaning a tank. He developed respiratory symptoms and was hospitalized.,1
"An employee bumped into another employee coming out of a dish room. She fell to the floor, suffering a broken left femur.",1
"An employee was retrieving carpet rolls from a shelf located about nine feet above the ground while standing on a platform that was raised on the forks of a forklift in order to reach the shelf. Two of the platform brackets broke off causing the platform to tilt to one side. The employee lost balance and fell onto the concrete floor, resulting in a fractured left leg and a concussion. The employee was hospitalized.",1
A skid steer struck an employee as it backed up.,1
"An employee was operating a double pallet jack. During a sharp right turn, the employee's left foot was caught between the platform of the pallet jack and a wooden pallet on the ground. The employee's lower ankle was lacerated.",1
Three employees were polishing the concrete floor in the back break room and were overcome with carbon monoxide (CO) from the compressor that was used in that room. One employee was hospitalized for CO poisoning.,1
"Electricians had just finished connecting two portable AC units to a subpanel outside a main panel. They put the fuses back on, and one of them was about to close the electrical panel when an arc flash burned his left hand and forearm.",1
An employee was struck by a car in a supermarket parking lot and suffered a fractured left ankle and foot.,1
"An employee was cranking the handle of a material winch to raise a 6.5-foot lead cable from a manhole. At the apex, he released the crank handle and tried to retrieve the cable and pull it away from the opening. As the cable started to drop down into the manhole, the crank handle started freely spinning and struck his left forearm, breaking it.",1
An employee was working the hat channel jig and suffered the amputation of their left middle finger.,1
"An employee slipped on a wet floor and fell, injuring her left knee.",1
An employee suffered chemical burns while changing sulfuric acid and was hospitalized.,1
An employee was attempting to free a jammed board in a sorter bin. The bin arm cycled and pinched the employee's left thumb causing a partial amputation.,0
"An employee was loading a casting into a core knockout machine. When the machine was activated, the casting slipped out of the clamps. The employee was trying to catch it when the clamps caught the tip of his left index finger. He suffered an amputation (without bone loss) to the fingertip.",0
"On May 21, 2021, an employee was using an overhead crane to lift a cured precast concrete piece. The employee had connected the crane's lifting hook to the lifting hook on the concrete piece. As the piece was lifted, the chain tightened and pinched the employee's right index fingertip. The fingertip was amputated.",0
"An employee was trying to re-enter a store after being locked out. He fell while climbing over the front counter, landing on the floor and suffering a broken leg and shoulder.",1
"An employee slipped and fell on a slippery production floor. The employee landed on their right knee, suffering a broken kneecap that required surgery.",1
"An employee was operating a CNC lathe. After machining a part, the employee went to open the lathe doors and his right middle finger was caught between the first and second accordion doors causing a partial fingertip amputation.",0
An employee was injured in a material-handling incident. The employee was hospitalized.,1
An employee was installing a cap in a valve and amputated their left index fingertip.,0
"An employee was operating a backhoe to level ground and seal an above-grade aluminum deposit at a landfill. The aluminum reacted with moisture in the ground when the operator leveled the ground, causing a reaction that produced ammonia. The operator suffered lung scarring due to ammonia inhalation and was hospitalized.",1
An employee was on top of a ladder pulling network cable through an open ceiling to wire for a security camera. The bottom of the ladder slipped out and the employee fell close to the wall. A large piece of crown molding was sticking out from the wall and the employee hit his head on it as he fell. The employee was rendered unconscious and was hospitalized for a head injury and a laceration above the right eye.,1
An employee was working on a lighting junction box above the ceiling and cut an energized 277-volt circuit wire. The employee was shocked and received an electrical burn on their right hand.,1
A temporary employee was using the wood jointer and amputated the tip of his right pinky finger.,0
"An employee was bringing a brake down on a piece of metal. The clamping mechanism caught his right thumb, causing the amputation of the thumb tip.",0
An employee was working in the bed of a truck strapping material down. The employee stepped backward and fell out of the truck to the ground below. The employee suffered a broken rib and collapsed lung.,1
"An employee was cutting a tree on the ground using a chainsaw. The tree rolled into the employee's left leg, breaking it.",1
"An employee was welding inside a barge. While trying to move a scaffold, a scaffold board fell and his right thumb was pinned between an angle bar and the board. The tip of the employee's right thumb was amputated.",0
"An employee was separating two large mail containers. When the containers became loose, she lost her balance and fell to the floor. She suffered a broken hip.",1
"At about 10:25 a.m. on May 21, 2021, an employee was moving stored pedestal fans from an overhead balcony onto an adjacent elevated forklift platform. As the employee stepped off the balcony and onto the forklift platform, the platform became unstable and tipped off the forks. The employee fell to the concrete floor about 10 feet below, suffering a back/spine injury. The employee was hospitalized.",1
An employee was hospitalized after a material handling incident.,1
"An employee was mowing a lawn with a riding mower. The mower became stuck on a tree stump. The employee slipped while trying to dislodge it and the employee's feet went under the mower deck. The employee suffered an amputation at the left shin, as well as the amputation of the right big toe.",1
An employee was standing next to a directional drilling machine when a plastic bracket from the drill struck the employee in the face causing three broken teeth and mouth lacerations.,1
An employee was installing metal roofing onto a house when he fell off the roof edge onto the ground and suffered a broken right leg.,1
"An employee was trying to readjust a pin for a chassis in a container box. The 53-foot  container dropped on his left pinky finger, crushing it and causing a partial amputation at the second knuckle.",1
An employee was preparing to repaint the indoor pool. The pool had been drained and a scaffold was erected inside of the pool. The employee leaned over the railing to drop a broom down to another employee working below when the midrail on the scaffold failed causing the employee to fall 12 feet before striking cross bracing and then fall another three feet to the bottom of the pool. The employee was hospitalized for a broken wrist and internal abdominal injuries.,1
"A half-ton jib crane was being used to move a bundle of 1 3/8 inch hex bars into a storage rack. The material rolled, and an employee's right middle and ring fingers were caught between the bars. Both fingertips were amputated.",0
"An employee was rappelling from a helicopter when he fell to the ground, resulting in a broken leg.",1
Two employees were working to clear a jammed screw conveyor and replace a drive belt. The injured employee's left index finger was crushed in a nip point between the belt and pulley. Approximately one-third of the employee's finger was medically amputated.,1
"An employee was getting off an elevator that was not flush with the floor and tripped on the uneven surface and fell, sustaining a hip injury.",1
An employee was about to sit down in a chair and fell. The back of the employee's head struck the floor.,1
An employee was checking for a leak in a hydraulic hose on the trim press machine and lacerated his right middle finger.,1
"An employee was unloading a box truck. The employee was operating a manual pallet jack while walking backwards onto the lift gate. The jack struck the employee's right leg, fracturing the fibula and the tibia.",1
"An employee was descending a ladder that was positioned against a gutter. The ladder slid on the gutter and the employee fell onto concrete pavers about 10 feet below, landing on and breaking their arm.",1
An employee was dumping garbage and was struck by a car. The employee suffered two open wounds on the head and the right leg.,1
"An employee was changing the creamers at the coffee station when a customer came up beside her. As she turned toward the customer, she fell backward hitting the right side of the bottom of her head on the of the corner of the yogurt bar. This resulted in a laceration on her head and bruising on her right hand, knee, and hip. The employee was hospitalized.",1
"An employee was walking across a production floor. He slipped on a metal drain cover that was covered in animal blood, fell, and landed on his left arm, breaking it.",1
"A crew had put their tools down after pressure-washing the outsides of two oil tanks. As they walked away, one of the tanks exploded. One of the employees suffered second- and third-degree burns on the back, from the waist up.",1
"An employee was bringing pallets down from the top of the steel shelving using a walkie stacker forklift. His hand got caught between the shelving and the forklift. As the employee tried to free his hand, he suffered a deep laceration that required surgery and hospitalization to repair.",1
A person fell on an employee who was sitting on a bean bag. The employee suffered injuries and was hospitalized.,1
An employee was operating power tongs and running casing into a hole. The CRT tool fell 40 feet from the top drive striking the casing stump and the employee. The employee suffered four amputated toes on their right foot and a puncture wound on their back and was hospitalized.,0
"An employee was on a 10-foot ladder, doing maintenance on a vent hood outside a hotel restaurant kitchen. As he was climbing to the top of the ladder, the ladder slipped. He fell to the ground and suffered a broken right thumb.",1
"An employee was placing tire tread onto trays on a tread cart. When employee stepped down between the cart and the guardrail to straighten the tread, the tugger moved and pinned the employee's left leg between the guardrail and the cart and fractured it.",1
"After changing an air filter in an attic area, a mechanic was getting down from a raised area (2-3 feet) when she suffered a left femur fracture resulting in hospitalization and surgery.",1
An employee's right foot slipped on debris as the employee walked into a trailer. The employee was caught in an awkward position and suffered a fracture above the left knee.,1
An employee was working out in an onsite gym as part of his approved work activities. He strained his back while performing back extensions and was hospitalized.,1
"An employee was loading steel beams onto a truck. The employee fell from the truck to the ground, suffering a broken pelvis.",1
"An employee was venting a 275-gallon intermediate bulk container to facilitate gravity feeding. He stepped up onto the platform of the secondary containment to gain access to the center cap. While doing so, he lost his footing and fell from the platform (25.5 inches above grade) to the concrete floor and suffered a fractured left tibia and fibula.",1
"On May 24, 2021, an employee was removing rigging from a 2,000- to 3,000-pound beam sitting on a hilltop. The beam jostled loose and rolled over him, breaking his pelvis.",1
"An employee was dislodging debris from a conveyor when the employee's left index finger was caught in the pulley, causing an amputation to the last joint.",0
An employee's right index finger was caught in the shop door resulting in a fingertip amputation.,0
An employee was operating a rip saw. A piece of wood kicked back and the employee sustained a puncture wound to the leg and was hospitalized.,1
An employee was climbing a 28-foot ladder on the side of a customer's home. The ladder shifted causing the employee to fall to the ground. The employee was hospitalized with rib fractures and lacerations to his head and hands.,1
An employee tripped and fell over a floor scrubber in a janitorial closet. The employee suffered a hip contusion.,1
An employee was leaving a room when she tripped on a stanchion divider. She fell onto her left knee.,1
"On March 24, 2021, the injured employee was walking down the stairs to leave work. The employee missed a step and fell down the stairs. The employee was hospitalized for a head injury.",1
"An employee was standing near his truck while hot liquid were being loaded into it. The liquid clogged, and while a pump was being used to blow and pull it, there was an explosion. The hot liquid burned the employee's face, hands, and feet.",1
"On May 25, 2021, an employee was bitten on the left hand by a rattlesnake at the loading dock. He was hospitalized.",1
An employee was delivering mail and started feeling ill and became dehydrated from the heat.,1
"A smokejumper parachuted out of a plane to fight a wildfire. He had a hard landing on rocky terrain and suffered a skull fracture, a traumatic brain injury, facial fractures, a fractured neck vertebra, left-side pneumothorax, a broken left humerus, a broken left scapula, three broken ribs on the left side, a broken right tibia, and a shattered knee. He was hospitalized.",1
"An employee was walking into the building from the parking deck when her shoe got caught on the textured surface and she fell forward. The employee was hospitalized for a subdural hematoma and bruises to the right orbit, chin, and left hand.",1
An employee was standing on the platform at the galvanizer machine holding onto the metal hand rail and observing the moving shovel/ladle for cleaning the galvanizer. The shovel/ladle struck the middle divider of the holding tank causing the shovel/ladle to move up and down roughly. As a result the employee's hand was struck-by the handle of the shovel/ladle and their fingertip was caught between the metal hand rail and the metal handle and amputated.,0
"An employee was moving several boxes of floor tile that were in front of a 2x2 piece of granite countertop. When he moved the last box, the countertop tipped over and struck him on top of the head and caused a laceration.",1
"An employee was walking through a garage. He tripped and fell to the floor, suffering a facial fracture and a cut hand.",1
An employee was delivering vinyl fencing to a customer's home when a timber rattlesnake bit his right hand. He was hospitalized.,1
An employee was operating the notching machine and amputated their right middle fingertip.,1
An employee lost his footing as he exited a trailer. The trailer's rear door strap was pulled onto his right shin.,1
An employee was taking groundwater samples from a monitoring well and became ill. The employee was diagnosed with chemical pneumonitis due to exposure to volatile organic chemicals (VOCs).,1
"An employee was operating a cracker mill designed to grind soy beans. The employee was clearing a jam in the machine when their right hand was caught between two cracker rolls (8"" blades) resulting in amputation of their pinky, ring, and middle fingers and a partial amputation of their right palm.",0
An employee was using a chain and hoist and suffered the amputation of their left thumb.,1
"An employee was cleaning a clog out of a spray nozzle head for a spray gun. The spray gun activated while the employee's hand was over the nozzle head, causing chemical/material to penetrate the employee's right hand. The employee was hospitalized, undergoing surgery to remove the chemical/material.",1
"An employee was preparing an inoperable AH-64 Apache Helicopter for tractor-trailer removal from the training area. During the process, the helicopter rolled on its side and caught the employee's left leg underneath it resulting in a fractured tibia, fibula, and ankle.",1
An employee was moving a glass piece of furniture. The piece fell and lacerated the employee's right forearm.,1
"An employee was standing on a counter to mark the location of a new wall mount for a flat screen television when his right foot slipped off the edge of the counter and the employee fell three feet to the floor below. The employee sustained rib fractures, a hemothorax, and a pulmonary contusion.",1
A piece of duct fell from a duct jack approximately five feet. The injured employee attempted to catch the falling piece of duct and crushed his fingertip between the duct and a nearby support steel frame resulting in a partial fingertip amputation.,1
"An employee was removing the tire from a forklift for transport to the shop for repair. The front tire was foam-filled and was heavier than expected. When the employee pulled the tire from the hub, he lost his balance and the tire fell onto his leg breaking it.",1
"On May 24, 2021, an employee had just moved some empty racks when a fork truck backed into one of the racks. The employee was crushed between the racks and suffered fractures to both legs.",1
An employee was installing purlins on the roof of a new building. The employee fell on the roof surface and the back of his right arm was caught on a purlin clip as he was falling. He suffered a laceration to the arm and was hospitalized for surgery.,1
An employee was servicing/inspecting the belt and pulley on an air exchange unit and amputated their right thumb.,0
An employee was helping a child get out of a chair when they tripped over an adjacent chair and fell. The employee sustained a fractured left femur.,1
"An employee was changing a hose on equipment. The hose crushed the tip of his right index finger, resulting in an amputation.",0
"An employee was using a crane to move material to the saw. After transferring the load, one of the sling hooks caught the frame of the saw, snapped back and struck him in the face.",1
"An employee had just placed wood cribbing on the ground in front of a forklift's forks and was trying to work a 5,000-pound cylinder off the forks and onto the cribbing. The cylinder rolled off the forks and caught the cuff on his glove. He was pulled down and pinned between the cylinder and the ground, suffering a dislocated right shoulder and a broken right arm.",1
" A framer was installing walls to a steel-framed building when he fell 30 feet to the ground. The employee suffered a shattered pelvis, torn ligaments, fractured vertebrae, and a spleen injury.",1
"An employee was installing an exterior window from a swing stage. As the employee was climbing down through the scaffolding to a lower level, his hand slipped and he fell to the ground, resulting in four broken ribs, a punctured lung, liver damage, and a head laceration.",1
"An employee was walking on top of steel that had been loaded on a trailer. The employee fell from the steel, suffering broken ribs and a punctured lung.",1
"On May 25, 2021, an employee was walking toward his work area when a rubber-track mini excavator backed into him. The track ran over his right foot, causing an open fracture. He was hospitalized.",1
An employee sustained chest contusions after being struck by a silage wagon that he had disconnected from a truck.,1
"An employee was on a lift, welding a clip on the outer side of a building at about the fourth-floor level. The elevator came down and contacted his right hand, cutting the wrist. He was hospitalized, undergoing surgery to the wrist.",1
An employee was lowering a pallet from the second shelf of the warehouse storage rack using a forklift. The pallet struck the wire frame shelf that it was on and knocked the horizontal bar on the rack down. The employee was putting the bar back on the rack when it fell and amputated their finger against the wire frame shelf.,1
"An employee was using a hand crank to crank a tarp and fell 10-15 feet to the ground. The employee sustained an pelvis fracture, multiple fractured ribs, severe head trauma, and a severe lung injury.",1
"At about 6:45 a.m. on Tuesday, May 25, 2021, two employees were removing a shaft from a plastic sheet roll core. One of them was releasing air from the shaft air bladders when her right index finger was caught between the shaft and the core. The fingertip was amputated.",0
"An employee was using grain vacuum to clean up bad grain at the bottom of a corn grinder. The vacuum became clogged and as the employee tried to unclog it, the auger blades amputated the top of their right index and middle fingers.",0
"An employee was checking a load in a truck before docking. The load had shifted in transit and began to fall when the employee opened the door. The employee jumped from the truck to the concrete floor, landing on his side and suffering a broken hip. He was hospitalized.",1
An employee was mowing a grass area along a lake when the lawn mover flipped over and the employee was trapped underwater for 4-5 minutes. The employee was hospitalized for a near-drowning and chemical burns to his lungs from inhaling water/fuel.,1
An employee fell about 20 feet from an aerial lift while pulling cables.,1
"An employee was in a truck loading material on a pallet jack. He fell from the back of the truck, landing three feet below and suffering a head injury and pain in his hands, wrists, left shoulder, left-side ribs, and knee. He lost consciousness and was hospitalized.",1
An employee was struck by a mini loader while trying to retrieve equipment that had been run over. The employee sustained injuries to his face and hand.,1
"An employee was pulling a dock leveler into a paint booth. The employee's left pinky finger was caught between the riser and a conveyor roller, causing the amputation of the fingertip just past the nail.",1
An employee was dismantling a scaffold and was removing a 24-foot deck from the power unit using a forklift. The deck got hung up and then released and swung around pinching the employee's right leg between the deck and the power unit and fracturing it.,1
An employee was turning a pallet jack into an aisle. The employee's right foot slipped off the platform of the jack and was pinched against a building column at the end of the aisle. The foot was broken.,1
An employee was operating a manual milling machine when his right hand was caught in a mill bit. His ring and pinky fingers were amputated.,0
A mechanic was observing equipment from a two-step work platform (approximately 20 inches high) and fell to the concrete floor below. The employee sustained five broken ribs and a broken clavicle.,1
An employee fell from a steel beam 10-15 feet above the ground while taking measurements at a baseball stadium. The employee sustained a fractured pelvis and fractured vertebrae.,1
"An employee as investigating a leak at roof level beside a parts rack at the final assembly area. As the employee was taking a picture of the leak, he stepped back into the drive path of a dolly train. The employee made contact with the third dolly in the train causing the employee to fall to the ground and fracture a leg.",1
"Employees were testing a series of five high-pressure hoses. There was a disconnect between the first and second hose and pressure in the second, third, and fifth hoses that needed to be released. As this pressure was released, a hose whipped and struck an employee's right foot and left ankle. The ankle and the foot were both broken.",1
"An employee was sanding a foundation fixture weighing approximately 400 pounds. The employee was working to rotate the fixture 90 degrees toward the ground in order to access the underlying edges. As he was maneuvering the foundation downward, it tipped over and a protruding appendage of the foundation pinned his pinky finger to the floor. The employee's finger was surgically amputated.",1
An employee was stepping up to a concrete ledge with a nail gun. The gun shot a nail into his right knee when he stepped up.,1
"On May 26, 2021, an employee was operating the bread packaging machine near the conveyor and sustained the amputation of their left middle fingertip.",1
"While conducting a hole in tubing test, a pressurized release of natural gas and debris knocked an employee off balance causing the employee to fall into the debris and gas. The employee sustained a right pinky finger dislocation and abrasions on their back.",1
"On 5/26/2021, two employees were working from a scaffold platform that was supported by side arm brackets applying brick veneer at a construction site. The employees fell approximately 20 feet when a bracket became dislodged from the frame. The injured employee suffered a back injury. The second employee was able to grab hold of the scaffold to keep from falling.",1
An employee was checking a strapping machine that was not working. The employee raised the platform on the strapping machine from the deck and was caught between one of the rollers and the metal platform. The employee suffered an amputation to the right pinky finger and was hospitalized.,1
An employee slipped on a wet floor and fell injuring her neck and head.,1
"While cleaning inside a machine, an employee contacted a rotating blade and sustained a hand laceration.",1
An employee was trimming a pecan tree with a hand saw. He had climbed the tree and was pulling a limb back to cut it when the limb contacted power lines. The employee was shocked and suffered burns to both hands and both knees.,1
An employee was using a hook tool on the finishing press machine in the finishing area. The tool got caught in the machinery and the employee's finger was pinched between the tool and the machine. The employee's left index finger was medically amputated.,0
"On May 26, 2021, an employee was driving a standup forklift taking products from the backroom to the produce area when the forklift hit a pole and then a pallet of wine causing her foot to be caught between the forklift and the pallet of wine. The employee suffered a broken left foot and was hospitalized.",1
"An employee was crimping heaters, which were not staying in place. As she tried to fix them, a crimper crushed the tip of her finger, causing a fingertip amputation.",0
An employee slipped and fell on the floor and fractured their left hip.,1
"On May 26, 2021, an employee slipped while cleaning the back of a dump truck. His right forearm was lacerated on a sharp edge of the dump truck's box. The employee was hospitalized.",1
"An employee was operating a punch press. A piece of fabricated metal broke off and struck the employee in the neck, lacerating it. The employee was hospitalized and underwent surgery to remove the metal shard.",1
An employee was using a meat grinder and amputated a finger.,1
An employee was walking beside a forklift when his foot was run over by one of the forklift's front wheels. The employee was hospitalized with a fracture and lacerations.,1
"An employee was climbing down a stepladder. One of the ladder's legs dropped into a core hole that had been filled with foam and covered with a skim coat the same color as the floor. The ladder tipped and the employee fell, landing 4 feet below and suffering a broken ankle.",1
"A mill was being set up. It jogged while an employee's hand was in it, amputating one of the employee's fingertips.",0
An employee was disconnecting a plant process hose carrying 32% liquid sodium hydroxide. The employee was exposed to the chemical under his face shield. The lower part of his face was exposed and he suffered a rash/burn.,1
"An employee was operating a dryer kiln when an alarm went off indicating that one of the two limit switches of the centering device control was not functioning properly. In order to reach the centering device control limit switch, the employee used a rod and kneeled down stretching his body/hand forward between the dryer exit and a column of an unloader machine. The employee's body was caught between the exiting tile cart and the column of the unloader machine resulting in fractured ribs.",1
An employee was cutting bar stock with an automated saw. The pneumatic clamp crushed her left ring finger at the nailbed. The fingertip was medically amputated at the first knuckle.,0
"An employee was helping co-workers to set a 3/8"" tempered glass material in the shower with suction cups. During installation, the glass shattered and cut the employee's right forearm.",1
"Two employees carried a piece of glass that had been on a conference room table to the dumpster. The glass was roughly 8 feet by 3 feet. As the employees got ready to put the glass into the dumpster, the glass shattered, causing a severe laceration to the right forearm of one of the employees. The laceration required surgery.",1
"An employee was moving across a first floor ceiling. The employee stepped on a ceiling joist, which gave way; the employee fell to the concrete floor about 10 feet below and suffered a broken right hand and broken right arm. The employee was hospitalized.",1
"An employee was grinding steel on a tank barge for hull repair. Sparks flew into the employee's shirt, which caught fire and burned the employee's stomach and hands.",1
An employee suffered a partial amputation to the left middle fingertip while cutting millwork with a miter saw.,0
"An employee was in a bucket constructing a new electrical distribution line. The employee was connecting a primary phase to a pole. While holding the primary phase in his right hand, his left hand was on the controls of the bucket. A metal part of the bucket contacted a live, energized line and the employee was shocked. The employee also sustained burns to both hands.",1
"An employee jumped off a pallet jack, which accelerated forward over her right foot. The foot was broken.",1
"An employee was in an attic when they fell through the ceiling and landed at ground level, suffering fractures to the right leg and heel.",1
"An employee was on a step ladder moving products. While descending the ladder, the employee missed a step and fell striking the shelf and then the floor. The employee sustained a fractured right hip.",1
An employee was cleaning grease from the drum roller bearing of a mixer truck when the side of the rotating roller contacted his left middle finger causing a partial amputation of the fingertip.,0
"A driver was inspecting an empty container for damage. While the driver was inside the container, a stacker operator started lifting the container, which was still attached to the chassis with four twist locks. The driver, upon feeling movement, jumped approximately 6 feet out of the container onto the concrete ground and broke his heel in two places.",1
An employee was performing masonry work on a residential home while working on a scaffold near an overhead powerline. The employee was electrocuted by the powerline and suffered injuries that required hospitalization.,1
"An employee was removing a piece of wood from an electric saw when the saw contacted his right hand, resulting in the amputation of two fingers.",0
"An employee was on a mobile ladder installing speaker wire. The ladder shifted and the employee fell about 10 feet, suffering a head laceration, a broken leg, and a broken arm.",1
"An employee was on a 28-foot ladder holding onto a cable that was being replaced. A truck struck the cable and the employee fell to the ground. The employee sustained a broken neck, shoulder, arm, wrist, and fingers.",1
An employee fell off a fixed ladder while performing work.,1
"At about 1:30 p.m. on May 27, 2021, an employee was carrying a 4-by-6 plywood panel down stairs from a second floor to a mezzanine. The employee fell at the last or second-to-last step and landed on the floor. Both of the employee's knees were injured, with quadriceps tendons torn from the kneecaps. The employee was hospitalized and underwent surgery.",1
An employee was unloading a cart of unsellable merchandise into a trash compactor. He lifted a broken picture frame and was impaled by a protruding shard of glass. The employee was hospitalized with a cut artery and a suspected tear to the liver.,1
An employee was operating a forklift when it struck a support beam. The employee suffered a head laceration.,1
"On May 27, 2021, an employee was trimming hedges with the hedge trimmer and amputated their left index fingertip.",0
"A vehicle struck a school crossing guard in the street. The guard suffered fractures to the right kneecap, sacrum, and right-side pelvis.",1
"An employee was manually refeeding tissue into the napkin press and folder machine. When the machine was jogged, a finger on her left hand was pulled between two rollers. The employee suffered a partial amputation of the left finger and was hospitalized.",1
"An employee was servicing a rooftop AC unit. While descending the roof's fixed ladder, he slipped and the employee fell onto his right side. The employee suffered a displaced elbow fracture.",1
An employee was sanding an elevator door and fell striking their head on the elevator doorway.,1
Employees were installing HVAC systems at a three-story apartment building. An employee fell 35 feet through an unguarded elevator shaft and suffered a broken ankle.,1
An employee was transferring milk into a delivery truck when the plunger valve on the milk truck partially amputated their left index finger.,0
"An employee was moving an electric pallet jack. The jack ran over the employee's left foot, breaking toes.",1
An employee was turning on the injection pump at a work site when a pressurized release of water struck the employee causing a laceration to their abdomen and chest and an injury to the left arm.,1
"While leaving work and heading to a vehicle, an employee fell forward in the parking lot hitting her face and head on the concrete. The employee was hospitalized with a laceration to the left brow, a broken nose, and a spinal fracture.",1
"An employee was preparing a spool to take up cable from an extrusion process. Tubing got caught on the collet and spindle of the winder. The employee was going to use scissors to cut the tubing off the winding reel. Before being able to cut, the tubing tightened on the rotating spindle shaft, amputating the employee's left index and middle fingers at the first joint.",0
"On May 26, 2021, an employee was using an 8-foot A-frame ladder to clean the building's awning when he slipped and fell off the ladder. He broke his right ankle and was hospitalized.",1
"A mechanic had ascended a work platform that was 44"" tall and had been positioned around the aircraft to perform his task. While addressing his work he stepped over the toeboard at the end of the platform onto the ground. He was hospitalized for five broken ribs and a bruised lung.",1
"An employee was climbing a wood power line pole. The pole failed below ground level and fell on him, breaking his pelvis.",1
"On May 27, 2021, employees were conducting power restoration at a site. An employee came in contact with an energized power line and sustained burns to both hands. The employee was hospitalized and had surgery.",1
"Two employees were lowering a 6-foot, 8-inch section of pipe to the ground with a come-along. The pipe slipped out of the rigging and struck a 6-foot stepladder one of the employees was standing on. The employee fell to the ground, suffered a skull fracture, and was hospitalized.",1
"Two technicians were changing out a compressor on an HVAC chiller. While preparing the chiller for a pump down, the compressor was over pressurized and the copper drain lines burst. As one technician approached the chiller, a piece of the copper drain line hit the technician on the left wrist. The employee was hospitalized.",1
"An employee was operating a crane at a steel fabrication shop. The employee had just laid a section of steel, carried in the crane's hooks, on the ground. The employee unhooked the hooks and began to raise them. One of them hooked the section of steel and overturned it onto the employee's right foot. The employee suffered fractures to the foot and toes.",1
An employee was using a table saw to cut cabinet filler boards. The saw amputated their left thumb between the fingernail and knuckle.,0
An employee was in a bucket truck attempting to lift a light pole using a rope and a winch. The rope broke causing the employee to fall from the bucket onto the truck. The employee sustained a fractured C-5 vertebra and a fractured shoulder blade.,1
An employee was on a ladder sawing off a dead tree branch. The employee fell off the ladder onto the ground and suffered multiple broken ribs and a spinal column injury.,1
"An employee was trying to find a test sample that had been placed into a pipe. As her finger entered the expulsion port, the pneumatic valve closed, amputating the bottom pad of her right middle finger near the tip.",0
An employee was sawing a downed tree when the tree rolled and his left calf was cut by the chainsaw. The cut required surgery.,1
"While carrying two lamps, an employee tripped on the corner of a nightstand and fell, fracturing his hip.",1
An employee was changing plastic film in a machine. Moving parts in the machine caused the amputation of the first joint of the employee's right index finger.,0
An employee was cleaning the floor behind the cutter machine at the end of their shift and were struck in the head by the cutter. The employee then fell and hit their head on the floor. The employee sustained a fractured jaw.,1
An employee finished an oil change and was cleaning the car's engine when his pinky fingertip was amputated by the fan belt.,1
"An employee was cleaning a conveyor machine. His upper body was caught in the machine's rotating shaft, and he suffered broken bones and facial lacerations.",1
"An employee was operating a welding machine. A falling piece of metal landed on the employee's left hand, partially amputating the index finger.",1
"While mounting a pallet jack, an employee grabbed the throttle instead of the safety bar. The jack moved and the employee's foot was broken between it and a pole.",1
An employee was scanning freight on a forklift through the mast of the lift and bumped the mast lever. The employee's right arm was caught by the mast resulting in a forearm fracture that required surgery.,1
An employee was cleaning a drum former machine. The employee's right middle finger was caught in the machine and the fingertip was amputated.,1
"On May 28, 2021, an employee was cutting onions with a standard chef's knife and partially amputated their left thumb.",0
"A crew of three Bassler Energy Services employees were about to clean out a heater treater vessel bottom. The vessel had been depressurized and its contents had been evacuated below the manway. When the crew opened the vessel to begin pressure-washing the manway face, fumes ignited and the resulting flash fire burned two of them. One suffered burns to the face, cheeks, and neck; the other suffered burns to the hands. One employee was hospitalized.",1
"An employee was backing down a dock with a large skid on the forks of his forklift. The forklift struck an upright I-beam. The employee's right hand was caught between the I-beam and the right rear upright post of the forklift's protective cage, causing the amputation of his pinky, middle, and ring fingers.",0
An employee was operating a palletizer and suffered a hand fracture that required surgery.,1
An employee was assisting in cleaning out the baghouse in the spray dryer room when the blades of the rotary valve amputated four fingers on their right hand.,0
"A mobile scaffold had fallen over and come to rest against a catwalk. A team of 10 to 12 employees were trying to right it when it moved off the catwalk, then fell to the ground. One of its crossbars struck an employee, who was trapped between the scaffold and the concrete floor. The employee was hospitalized with back injuries.",1
An employee went to remove a garment that had jammed on a conveyor line. The tip of her right ring finger got caught in the conveyor belt and was amputated.,0
"An employee was sitting in a rolling chair in the security office and bent over to pick up a piece of dropped paper. As she bent over, the chair rolled out from underneath her, causing her to fall and hit her head on her desk. She was hospitalized for a concussion.",1
A stand-up powered industrial truck struck another powered industrial truck while turning. Its operator was ejected and was caught between the two pieces of equipment. The operator suffered a bone contusion and a small pelvic fracture at the left side of the hip.,1
An employee had been using a coil cleaning product when the wind blew the chemical into his face resulting in eye irritation.,1
"At 11:00 a.m. on May 28, 2021, an employee was bracing the lid of a shaft plate by standing against it. The water stream from a high-power pressure washer struck him in the back, causing a laceration and a collapsed lung. He was hospitalized.",1
"An employee was sliding two empty totes stacked on top of each other across the floor into a storage area. While doing so, the bottom tote started sliding out from the top tote. The employee used one hand to hold the top tote then placed her other hand on the bottom tote to support herself from falling. She then fell and fractured her femur.",1
An employee was sweeping out the bus while walking backwards. The employee fell off the edge of the bus onto the ground and sustained a concussion.,1
An employee was removing a blister from a machine on a manufacturing line. She suffered a partial amputation to her right middle fingertip.,0
"An employee was placing wheel chocks on a trailer. The trailer moved when another employee entered it, causing the wheels to crush the first employee's fingers. The employee suffered a partial amputation to a thumb.",1
"An employee was at an oil rig, cleaning a window while standing on the second rung of a ladder. The ladder shifted and he fell. He landed on the rig floor and suffered fractures to the left lower tibia and fibula.",1
An employee closed the door of a safe on their finger and amputated the fingertip.,0
An employee was on a ladder installing a gutter and fell from the ladder onto the ground. The employee sustained a fractured foot.,1
An employee was repairing the bottom of a customer's boat and drank acid resulting in burns to their throat and stomach that required hospitalization.,1
A shipping yard laborer had just helped a straddle carrier operator connect lifting gear to a flat rack's arms. The straddle carrier was lifting the arm when the flat rack slid toward the yard laborer and pinned him against the bumper of the straddle. The laborer suffered a broken sternum.,1
"On May 29, 2021, an employee sustained an electric shock to the left hand while cleaning a deli slicer. The employee was hospitalized.",1
An employee was walking past a dock as a forklift was backing out of the trailer at the dock. The rear tire of the forklift struck the employee resulting in a left foot/ankle laceration and fracture.,1
An employee was monitoring a cookie machine when his right ring finger was caught in the machine and amputated.,0
An employee was in a stock picker when it moved downward and crushed his fingers against a rack resulting in partial amputation of the distal phalanx on their middle finger.,0
An employee was cleaning food equipment when the employee's right hand got stuck in the rollers of the conveyor portion of the equipment resulting in a severe laceration.,1
An employee began to feel lethargic and to cramp at the jobsite. The employee was hospitalized for a possible heat illness.,1
An employee's foot got caught on a power cord while standing up from their desk and the employee fell fracturing their left hip.,1
"An employee was changing a pricing sign while on top of a soda machine located outside the grocery entrance. The employee fell backward off the machine and sustained injuries to the shoulder, back, and head; as well as an undetermined fracture that required surgery.",1
Four employees were pushing a roll of paper on the paper machine winder deck to clear a conveyor for two defective rolls. They lost control of the roll and it struck one employee resulting in a fractured pelvis that required surgery.,1
"An employee was maneuvering a product cart with his hands on the sides of the cart. As he was doing so, the employee's left pinky finger got caught between the cart and the edge of a metal guard on a conveyor belt resulting in a fingertip amputation.",1
"While walking down stairs, an employee tripped and fell to the stair landing. The employee sustained a fractured left femur.",1
A mechanic was performing preventative maintenance on an automated plunger type valve. The air pressure on the valve released and the valve closed due to spring pressure on it. The employee's left ring fingertip was caught between the valve and its seat resulting in amputation.,0
An employee was clearing scrap from the press outfeed roller conveyor and contacted the chain and sprocket resulting in a partial amputation of the right middle finger.,0
An employee was replacing a gearbox on a palletizer when the tip of his right ring finger was caught in the chain/sprocket assembly causing a partial amputation.,1
An employee was priming a sump pump when hot water and steam were released burning his left arm and neck.,1
"An employee was walking through the chemical room when he noticed a 2.5 gallon jug of detergent that was unstable on the storage rack. When he went to grab the jug, his hand slipped off of the product which caused the chemical to splash onto his stomach and upper leg. The employee was hospitalized for chemical burns.",1
An employee was pouring concrete and fell onto exposed rebar resulting in an arm laceration and hospitalization.,1
"While cleaning the operating room, an employee tripped over a cord and fell fracturing her ankle.",1
"On May 31, 2021, at approximately 5:30 p.m., a material equipment operator (MEO) was driving a forklift in reverse to place a bundle in a staging area. The forklift ran over the foot of another employee who was walking in the area. The injured employee's foot was surgically amputated.",1
"An employee was in between two parked vehicles. Another vehicle left an on-ramp and went onto the grass shoulder. It then struck one of the parked vehicles, causing the employee to be caught between the two parked vehicles. The employee sustained fractures to both lower legs.",1
An employee was clearing a jam in the filler machine and amputated their right thumb.,0
An employee had been decking the roof of a one-story house. He fell to the ground and was hospitalized with a broken femur.,1
An employee was cleaning the manure belt in the barn using a broom. The broom became caught in the manure belt. The employee attempted to free the broom and amputated their left index finger.,1
"An employee was unpacking a crate of pre-purchased glass sheets. While unpacking the crate, the weight of the glass shifted and the glass fell forward out of the crate and onto the employee's left leg resulting in a fractured fibula and tibia that required surgery.",1
"While reaching for product in the warehouse, an employee lost balance and fell off a pallet jack landing on the floor approximately 4 to 5 feet below. The employee was hospitalized with a fractured left knee.",1
"An employee was attempting to restore power by removing tree limbs from the power lines and fell out of a tree. The employee suffered a concussion, fractured T6-T8 vertebrae, and an injured sternum, a right ankle tendon injury, and a lumbar injury.",1
An employee fell from a ladder and was hospitalized.,1
An employee was climbing a lumber pile 8 to 9 feet off the ground in order to cover it with a tarp and fell to the ground. The employee sustained a fractured skull.,1
"While measuring with a tape measure, an employee bumped their hard hat on something overhead and then stepped backward into a 3-foot deep conveyor tunnel, falling and sustaining a fractured right tibia.",1
"An employee was descending a fixed ladder when he lost his grip, causing him to fall approximately 8 feet to the floor. The employee sustained a broken right leg.",1
"An employee was using a doffing cart to move a roll of paper over to a conveyor. The roll hit the edge of the roll plate, causing it to tip over; the employee suffered a back sprain while stopping it from falling.",1
"An employee was removing the bands from a package of 12-foot logs, which had been raised on a forklift and supported at each end with more logs. When the employee cut the last band, the logs fell on his ankles and broke both of them.",1
An employee was picking up a piece of glass with a co-worker when the glass slid and cut the employee's left wrist.,1
"An employee descended a ladder inside a barge tank to take depth measurements of the lining. About 2-3 rungs from the bottom of the ladder, he turned and jumped to leap over a puddle of liquid around an inside pump. The employee landed in the liquid, which splashed on his face and  eyes. The liquid was caustic and the employee suffered loss of vision in his right eye and third degree burns on his legs.",1
An employee was removing a utility vehicle with other team members when they decided they needed additional rigging. The employee was securing the additional chain for the rigging when the vehicle shifted and caught the employee's leg between the vehicle and a collection box. The employee suffered a compound fracture to his lower right leg.,1
"An employee was observing a robot stacking lumber onto pallets for shipment. The robot's arm picked up a piece of lumber to place on a pallet, then swung and struck the employee's face. The employee was hospitalized with a jaw fracture, loss of teeth, and an open wound to the right side of the mouth.",1
"While trying to avoid being hit by a patient, a nurse tripped on tubing/wiring and fell to the floor. The employee sustained a fractured left knee.",1
"After repairing a casing on a power line, an employee was making a connection to energize a distribution line. The employee was shocked, suffering second- and third-degree burns to the face and left elbow.",1
"An employee was entering the back door of his work location when he tripped over a concrete slab and fell, resulting in a fracture to his left hip below the ball joint.",1
An employee was testing a circuit breaker panel with a multimeter when the panel flashed and the employee was burned on their hands and arms.,1
An employee was moving hockey bleachers to a prep area when they fell off the bleachers and fractured their wrist.,1
"An employee was about 4 feet up an 8-foot step ladder, installing window blinds. He lost balance while descending the ladder and fell to the ground, suffering a broken left foot.",1
"An employee was working near an elevator shaft opening on the third floor when he fell down the elevator shaft and onto the roof of the elevator, resulting in a laceration on his forehead, brain hemorrhaging, and back pain.",1
"An employee was repairing a plastic flighted conveyor when a plastic piece broke and flew into their eye, resulting in an injury.",1
"An employee was assembling a slide rail system and had an interior panel installed into the soil when the panel dropped 2 feet, causing him to lose balance and fall into the excavation. The employee suffered contusions.",1
"An employee was observing the installation of a boom mower which was being moved by a forklift. When the load was relieved from the forklift on the left side, the assembly shifted toward the forklift and out of alignment with the tractor. The forklift operator attempted to reposition the load balance; however, the load shifted forward and the right side of the assembly dropped off the forks to the ground, striking the employee's right foot. The right foot was crushed and the tibia, fibula, and heel bone were broken.",1
An employee was using a table saw and amputated his left pinky finger.,1
"On June 1, 2021, at approximately 5:15 p.m. an employee was cleaning residual material from a tank wagon. When the tank wagon operator opened the meter/pump valves residual rinse water (approximately 200 degrees F) was released from an open hose and splashed onto the employee's legs. The employee was hospitalized for second degree burns on his lower legs.",1
"An employee had been operating the envelope production line. As the employee was troubleshooting the line, the employee was caught in and struck by a rotating drive shaft resulting in a severe leg laceration requiring surgical repair.",1
"An employee emptied the contents of a truck into a tank and then closed the valve on the truck. While taking the asphalt transfer hose off the truck, residual liquid asphalt splashed on his face and chest resulting in second degree burns.",1
"On June 1, 2021, an employee was reinserting a repaired roll into a machine. Another roll in the machine tilted, came off the track, and fell onto him. He suffered broken ribs.",1
"An employee tripped on a brick on the sidewalk in a parking lot. He fell to the ground, breaking his right hip. He was hospitalized.",1
"An employee was operating a reach truck in the reverse position and lowering the forks. The truck struck a wood pallet, a piece of which broke off. The employee's right leg was pinned between the piece of wood and the truck's cab. The leg was broken, and the employee was hospitalized.",1
An error came up on a pallet receiver table's machine panel and an employee went to the pallet ejector to troubleshoot. The employee was resetting a limit switch when his thumb got caught by a moving chain. The employee suffered a laceration that resulted in a revision amputation.,0
"An employee was preparing to pump bail water to a vessel when a metal end-cap was blown off the end of the 3-inch bail hose. The end-cap struck the vessel, ricocheted, and then struck the employee's jaw. The employee sustained a fracture to the face and jaw.",1
An employee was loosening a clamp on a steam line for a carton filling machine. Steam burst out of the pipe where the clamp was and burned the employee's chest and arms.,1
"An employee was repairing a battery-powered lawnmower . As the employee lifted the mower to look underneath, the mower energized. The blades struck the employee's left hand resulting in the amputation of the middle, ring, and pinky fingers.",0
"A crew drilled a hole in the ground for a power pole. While the auger was being lifted, the sling snapped and struck an employee on the right arm, resulting in a fractured elbow.",1
"An employee was removing mold plates from a pallet when the bottom plate fell forward off the pallet and struck her lower left leg, resulting in a fracture that required hospitalization and surgery.",1
An employee was offloading a stand-on lawnmower from a trailer. His foot was caught between the lawnmower and a concrete parking block. He suffered broken bones in the left leg.,1
An employee was cleaning meat out of the auger machine. A door in the auger machine went down on his right hand resulting in amputation of the ring finger.,0
"At approximately 9:45 PM, an employee was found unconscious on the floor, laying next to a ladder. The employee sustained a laceration on the back of the head and was hospitalized.",1
"An employee was fixing the load on a trailer. He pulled on cardboard, lost his balance, and fell to the ground, resulting in a broken left wrist.",1
A temporary employee was bending down to pick up a lateral support block when his nail gun fired a nail into his right knee.,1
An employee was troubleshooting the preheater of a repaver and sustained burns to the left hand and arms.,1
"An employee stepped on a temporary air hose while walking through the shop, lost balance, and fell to the ground breaking a leg.",1
An employee was taking pictures of the fire sprinkler system inside of the dumbwaiter when she fell 10 feet. The employee was hospitalized with a head injury.,1
"An employee was mowing a lawn when a branch got caught on the front of the mower. As he was trying to free the branch, the rotating mower blade lacerated his foot.",1
"On June 1, 2021, an employee was trying to clear a milk case jam on the dolly loader track. His right was hand was under the milk crate and his index finger got caught in the chain of the track, resulting in a fingertip amputation.",0
"A postal employee began to feel hot, dizzy, and clammy. The employee was hospitalized, suffering from heat-related illness.",1
"On June 1, 2021, an employee was removing a mold from the side of a press. The mold slipped off the steel transfer plate and fell onto the employee's left foot, breaking three toes.",1
An employee was stocking product in his work area when a family member entered the store and stabbed the employee in the neck with a knife. The employee was hospitalized and required surgery.,1
Two employees were fixing the clamping mechanism on a trim press. The press activated and came down on top of an employee's left thumb and lacerated it.,1
An employee was bitten by an insect while processing material.,1
An employee was pulling parts in a warehouse when they began to feel heat-related illness symptoms and were hospitalized.,1
"An employee was driving home when he began to suffer nausea and cramps in the fingers, arms, and chest. After stopping his truck and leaving it, he lost consciousness. He was hospitalized, suffering from a possible heat illness/injury.",1
"An employee was replacing an air compressor. The employee was heating the tubing with a torch when the oil residue from the tube flashed and contacted the employee's face area. The employee's face cover caught fire, and the employee suffered first-degree burns to the face and chest. The employee was hospitalized.",1
The injured employee was driving a forklift when they were struck by the forks of a pallet jack. The employee suffered a broken right femur.,1
"An employee was operating a standing forklift with loaded pallets. The forklift hit a bump and the employee's leg was pinned between the load and a concrete bollard, resulting in a broken leg.",1
"An employee was standing in the area where his truck trailer was being unloaded when a forklift operator moving a crate bumped into the trailer wall, causing the crate to shift and fall onto the employee. The employee suffered a fractured hip and pelvis.",1
"An employee was assisting a co-worker with reassembling an operating room bed when her finger became pinched between the top and bottom pieces of the bed, resulting in an amputation of the left pinky fingertip.",0
"An employee was riding as a passenger in a side-by-side golf cart as it came down a mountain. The cart started to tilt, then fell as the employee was trying to keep it straight with his right leg. The driver fell on him. He suffered three broken ribs and a broken right femur.",1
An employee was using a CNC lathe to finish-grind a small urethane roll. His right hand contacted the rotating grinding wheel and was pulled in. He suffered amputations to the ring fingertip (at the first knuckle) and the middle finger (at the second knuckle).,1
"An employee was walking above a hatch when he fell into the hatch approximately 25 feet to the ground below, resulting in back injuries.",1
An employee suffered a puncture wound to the left index finger while using spray paint equipment. He was hospitalized.,1
An employee was working at the tail end of an edger conveyor. The employee was caught in the rotating tail end of the conveyor and suffered an arm amputation.,1
"An employee was standing on the deck of a barge after helping set a 60-foot wooden post in a pile driver mounted on an excavator. The post snapped in two and one section swung back and struck the employee in the back, knocking him to the deck of the barge. The employee suffered skin abrasions and fractured bones in his back and ribs.",1
An employee was operating a pneumatic press when it cycled and struck the employee's right little finger. The fingertip was amputated. The press was guarded at the time of the incident.,0
"An employee was moving product with a forklift when the forklift struck a bollard. The employee's left foot was crushed, resulting in an amputation.",1
"On June 2, 2021, at 8:20 a.m., an employee was driving a forklift uphill that was holding bundles of beams that became unstable. With the forks on the ground, the employee attempted to move a board that was part of the load supporting the stack of bundles, causing one bundle to fall and pin the employee's leg between it and a bundle that had previously fallen. The employee was hospitalized due to a contusion to the left knee and leg.",1
"An employee and a co-worker were getting ready to splice underground wires when a screwdriver that had put on a wall made contact with the old wire, causing a flash. The employee suffered burns to their arm, hand, leg, and face that required hospitalization.",1
"An employee had just finished helping a co-worker secure a 9-foot section of wire trough, that was secured to a cross member that was elevated approximately 11.5 feet above the concrete floor. The employee was descending a fiberglass step ladder when the ladder shifted from beneath him in one quick movement, causing him to lose his balance and fall approximately 5 feet. The employee suffered an L-1 lumbar fracture and was admitted to the hospital.",1
An employee was using a screwdriver to clean out a hole saw attached to a drill. The drill was activated and the blunt end of the screwdriver struck the employee in the right eye. The employee suffered bleeding to the eye and permanent vision loss.,1
"On June 2, 2021, at 9:30 a.m., an employee was moving stock material from a pallet by hand when other stock materials fell from the pallet and struck the employee's ankle, resulting in a torn Achilles tendon.",1
"On June 2, 2021, at approximately 10:45 AM, a mechanic was standing next to a hydraulic baler press when it cycled. The platen came down on the mechanic's foot resulting in amputation of several toes. The employee was hospitalized.",1
An employee was entering the building and held the door open for a co-worker exiting the building. The edge of the door edge contacted a bollard and pinched his left middle finger. The fingertip was amputated without bone loss.,0
"An employee was removing a refrigerator unit with a hoist when it shifted, causing the employee's finger to get caught in a lifting hook and resulting in amputation of their left index fingertip.",0
"Equipment was being moved into a charging area. It pinned an employee against a guardrail, breaking the employee's ankle.",1
"An employee was preparing to load equipment into their truck. The employee fell, striking their head and suffering a concussion, a brain bleed, and possible fractures. The employee was hospitalized.",1
"An employee was fixing a grinder. The space was limited and he could not open the grinder electrical door all the way. After checking voltage and replacing a fuse, he stood up to shut the main disconnect off and the cabinet door shut slowly, pushing his hand inside and shocking him. He was then held to the grinder. He was shocked, resulting in the amputation of his left pinky and ring fingers, as well as a thumb injury that required a skin graft.",0
"An employee was operating a milling machine and pressure-testing finished parts. As the employee tested a part, an upper piece of the test fixture separated and struck the employee's head causing a laceration.",1
An employee was trying to clear a jam on a keg line. The employee's left foot was caught by the infeed. The foot was amputated.,0
"An employee was attempting to attach chains to a 1,060-lbs. steel frame when the frame fell onto the employee, resulting in eight broken ribs and lacerations above the eye and to the fingers.",1
"A piece of material or equipment fell from a 20-story building, injuring an employee.",1
"An employee was descending a ladder when he fell from the second rung of the ladder and hit his head on a parked lift truck. The employee suffered blurred vision, a headache, a bump on the back of his head, and a brain bleed that required hospitalization.",1
"A road flagger slipped on loose gravel and fell, suffering a broken hip.",1
"An employee was operating a large manufacturing press when their left ring finger became caught in the press, resulting in a partial amputation just above the first knuckle.",0
An employee was operating a table saw when it amputated his left thumb.,0
"An employee tripped on a power cord for an electric rocking chair, fell to the floor, and broke her hip.",1
"While riding an ATV during a training class, an employee was going down a hill on a trail with some hairpin turns when a wheel got caught on a rock and the ATV rolled over. The employee suffered a lacerated left calf and scrapes and abrasions on the left arm.",1
"Employees were disassembling a flange test adapter on equipment after it had undergone  hydrostatic pressure testing. The injured employee was loosening the bolts holding the test flange to the equipment when pressurized water (22,000 psi) escaped and struck his upper legs, causing severe lacerations to both thighs. The employee was hospitalized.",1
"An employee was trying to close a trailer door when they fell off the back of the trailer to the ground below, resulting in a head injury.",1
An employee and a co-worker were cleaning out a tank. The employee had drill mud all over their boot and the co-worker was helping spray mud off the boot with a pressure washer gun when the pressurized water cut the employee's foot.,1
"An employee was removing a 30-pound tray of salmon from a rolling tray rack when the tray became jammed in the rack. When it came unjammed, it impacted the employee's left middle finger, just after the nail bed, up to the first knuckle. The employee suffered a crush injury with the loss of skin.",1
"An employee was cleaning out a hopper when his hand slipped and contacted the rotor, resulting in a right middle finger amputation at the base of the nail and damage to the index finger.",1
"An employee was moving cattle on horseback. While he was cutting a bull from the herd, his horse spooked and began to buck. He was thrown from the horse to the ground, suffering a broken left fibula and ankle.",1
"An employee was standing on a stool/ladder to reach a nip point on an unused portion of a printing press, about 10 feet off the floor. The employee was caught between a press nip roll and an idler roller, suffering contusions and damage to skin on both arms.",1
An employee was cutting boneless strip steaks with a boneless saw. The saw amputated the tip of the employee's right thumb.,0
"An employee was dumping mail from an all-purpose container onto a culling belt. The employee was reaching with their right hand to remove a package stuck in the container while their left hand was on the bar that holds the container in place when it's turned upright to dump the contents. The container shifted and crushed the employee's left middle finger between the bar and metal frame of the container, resulting in a fingertip amputation.",0
"An employee was inspecting a part in an air-powered machine. The machine crushed her left index fingertip, amputating about 1/4 inch of it.",0
"An employee was moving grating onto a hole in a mezzanine floor when he fell feet-first through the hole to the concrete floor 10 feet below, resulting in three fractured vertebrae, a broken rib, and a concussion.",1
An employee cut his left index finger while taking a panel of sheet metal off a machine during preventive maintenance.,1
"On June 3, 2021, an employee was standing in a receiving area when a forklift struck him. He suffered two broken legs.",1
"An employee was removing a bolt from a window covering when the window came down, crushing their left pinky finger and resulting in a fingertip amputation.",1
"An employee was loading and unloading grain when the swivel spout broke loose from the bracket and fell on the employee, resulting in hospitalization for broken ribs and a head abrasion.",1
"An employee was taking a tire off a rim. When the arm of the tire machine moved, it caught the employee's left index finger and amputated the fingertip above the first knuckle.",0
An employee was unloading a truck with a forklift. The employee's right hand was caught between the forklift's roll cage and a computer keyboard's metal swing arm. The little finger was crushed at the knuckle and the ring finger was lacerated.,1
An employee was pushing material forward on a conveyor belt. The employee's left index finger was caught between the rollers and the belt resulting in amputation of the pad of the finger.,1
"An employee was loading material on the back of a box truck when he lost his balance and fell to the ground, resulting in fractures to the left tibia, fibula, and ankle.",1
"An employee was on a ladder, working on an aircraft antenna. The employee fell 3 feet from the third rung of the ladder, struck the wing, and then landed on the concrete floor. The employee suffered a broken pelvis.",1
"At about 3:30 a.m. on June 4, 2021, an employee fell from the back of a delivery truck while unloading it. The employee landed on the ground and suffered a broken hip.",1
"An employee slipped while stepping onto a curb and fell to the ground, suffering a broken left hip.",1
"An employee was walking across the rig floor carrying a large bolt, called a connecting pin, when he tripped on an object and fell to the floor. The bolt impacted the end of his left ring finger and amputated the fingertip.",0
"An employee was changing out floor paper under a chain conveyor inside a topcoat cure oven. His left middle finger was pulled into a pinch point between the conveyor's chain and a gear. The skin of the fingertip was degloved, and the fingertip was medically amputated at the first joint.",0
"An employee was climbing down industrial stairs after rinsing a conveyor. The employee slipped on a hose and fell down the stairs, catching their right pinky finger between food fencing and a conveyor channel. The finger was amputated below the second knuckle.",0
"An employee was clearing a jam on a board edger when their right index finger was struck by a saw blade, resulting in amputation at the second knuckle.",0
An employee was operating a metal shear machine when the blade dropped and amputated his right hand.,0
"An employee was descending from a ladder when he fell, landing on the floor and suffering a hairline fracture to the left wrist, a ruptured spleen, and internal bleeding.",1
"On June 4, 2021, an employee was installing shades inside a greenhouse from a scissor lift about 16 feet in the air. He fell from the lift, suffering back injuries. He was hospitalized.",1
"An employee was re-reeving blocks using a crane. When the cables were loosened, the blocks shifted and fell on the employee's left leg, fracturing it.",1
An employee at a boarding facility opened a cat enclosure to feed a cat and clean the enclosure when the cat bit her left hand.,1
"An employee was moving about 12 sheets of drywall, stacked against a wall in a hallway. The drywall became and unstable and fell on the employee's left leg, breaking the femur.",1
An employee had been moving wood pallets. An inverter struck the employee's left arm resulting in a fractured ulna and tissue damage to the arm.,1
"An employee was carrying ceiling panels and placing them on a scissor lift for installation. The employee fell through a floor hole and landed on a concrete floor below, suffering a punctured lung, a broken kneecap, and a laceration to the left side of the forehead.",1
An employee was working with leather using a manually held rotary knife and amputated their left index fingertip.,0
"Employees were loading a flatbed trailer with deck slab forms using a 15-ton crane. After the last form was loaded onto the flatbed, two employees climbed on top of the form to unhook the rigging between the form and spreader bar. The spreader bar was hoisted up and the crane began to move toward the east end of the building. The crane boom struck the employee, who was knocked to the ground (about 13 feet below) and suffered a head injury. The employee was hospitalized.",1
An employee was chipping up concrete around an air conditioning slab using a hammer. A sharp piece of concrete dislodged and struck his chest causing internal bleeding.,1
"While walking down an aisle in the warehouse, an employee was struck by a forklift and subsequently fell. The employee sustained fractures to the right hip and left ankle.",1
An employee was working on a breaker box when it arced. The employee suffered a burn to the right arm.,1
"An employee was tending to a grinder machine that was smoking. The machine caught fire and exploded. The employee sustained first, second, and third degree burns to their back and both arms.",1
"While cleaning the bars to the tack spray, some tack spray material landed on the employee's shirt and burned his chest.",1
"On June 4, 2021. a temporary employee (working for Express Management) was near a storage rack when a 3-foot bin weighing about 45 pounds fell on her. She suffered a head laceration/contusion and was hospitalized.",1
An employee was changing out a cylinder on a 40-foot towable man lift. The cylinder slipped back and amputated the employee's middle fingertip on his left hand.,0
"An employee was loading a patient on stretcher into the back of a helicopter when the stretcher collapsed and the employee's left pinky finger was crushed between the stretcher and the ground, resulting in amputation.",0
An employee was attacked by two dogs while delivering packages to a house. The employee suffered arm and hand amputations.,1
"An employee was trying to resolve an issue with a mill at a take-out door. The machine was actuated and the door shut on the employee's left hand, causing amputations to the tips of the middle and ring fingers.",0
"An employee was using a torquing tool to torque down bolts on the blades in a wind turbine. As he began to tighten a nut, his finger became caught between the torquing tool and the wall of the hub.  The employee sustained an avulsion fracture to a finger.",1
An employee was repairing the four belt blower motor of an air handling unit. The belts rotated and the employee's left index finger was caught in the unit resulting in an amputation to the finger.,0
"An employee was unclogging a pump with chicken product. His right hand got caught in the pump, and the index and middle fingertips were amputated.",0
"An employee sat on a bucket, which had potassium hydroxide on the lid. The employee suffered a chemical burn and was hospitalized, requiring a skin graft.",1
"At about 4:30 p.m. on June 5, 2021, an employee was trying to break up a fight between a coworker and a customer when the customer stabbed the employee with a knife. The employee was hospitalized, having suffered a punctured lung.",1
An employee's pant leg was caught by a forklift tire and pulled. The employee's left ankle was broken.,1
"On June 5, 2021,  an employee was attempting to fix the check-weigher on a line and the chain pulled their left glove into the chain and sprocket resulting in a partial amputation of the left index fingertip.",0
"An employee was using an electrical pallet jack to move pallets. While turning, his left foot and leg were struck by the pallet jack. The employee sustained multiple contusions and lacerations to the left leg, ankle, and feet.",1
"On June 5, 2021, an employee was stocking merchandise when she tripped over a hand truck she had been using. She fell to the floor, breaking her elbow. She was hospitalized.",1
"An employee tripped over a box, fell to the floor, and suffered a pelvic fracture.",1
"An employee was moving a parking barrier with a forklift. When he went to reposition the barrier, his finger was smashed between the barrier and the forklift, resulting in a fingertip amputation.",1
An employee was driving a stand-up forklift when it struck a piece of wood on the floor. The forklift then diverted into a storage rack and the employee's foot was pinched between the forklift and the rack resulting in multiple fractures to the foot and ankle.,1
"Employees were attaching bungee cords to keep hides separated between carcasses. Two S-hooks on a bungee cord became entangled and began stretching. As an employee drew her knife to cut the bungee cords apart, the knife lacerated another employee’s left arm above the elbow.",1
"An employee was spray-painting a ceiling from an elevated mezzanine area. He got entangled in the spray hose and fell to the floor about 8 feet below. He suffered a compression fracture to a back vertebra, as well as four broken ribs.",1
An employee was cutting a piece of wood with a hand saw. The saw cut his right thumb.,1
"An employee was filling air pockets in seam welding for structural support on an aluminum platform. As the employee was grinding the platform with a grinding disk, a piece of metal from a wire brush (which had been embedded in the aluminum) came free and injured his left eye.",1
An employee was exiting a production floor into a hallway when he slipped and fell. He suffered an aggravation to a previous back injury and was hospitalized overnight.,1
An employee suffered a finger amputation while working with a lead stripping machine.,0
"While inspecting a boat, an employee fell through an open hatch leading to the engine room. The employee suffered a broken femur, caused by the ladder and the floor the employee landed on.",1
"An employee was using an upright panel saw. While holding a piece against the fence, the saw amputated the employee's thumb at the second knuckle.",0
"An employee was installing a 16-inch pipe, which was hanging off the ground. He tripped and caught himself on the pipe; the pipe then swung, and his left hand was caught and fractured between it and an I-beam.",1
An employee was cutting the shrink wrap off pallets when a load of material fell from a pallet onto the employee's head. The employee was hospitalized.,1
"An employee was running an asphalt rake to set the edge of pavement. The employee developed heat stress symptoms and was hospitalized, suffering from heat exhaustion.",1
"An employee was backing away from a desk when she tripped on a pallet and fell, hitting the metal shelving under a nearby work table with her right elbow and the right side of her rib cage. She suffered three broken ribs, scrapes and bruises to the elbow, and a possible partially collapsed lung.",1
"An employee was moving a stuck 80-pound cart filled with milk. He suffered a muscle strain and went to the hospital, where he was diagnosed with a collapsed lung.",1
"An employee was cleaning out mud from a gas-powered masonry mixer. Once the mud was dislodged, the mixer's paddles began to move and caught his right arm. He suffered an injury to the forearm.",1
"At 4:45 p.m. on June 7, 2021, an employee was unloading a truck when a box fell and struck her. She fell on her left hip, injuring it.",1
An employee was operating a forklift when her foot was pinned and injured. The employee was hospitalized.,1
An employee was coming out of a dock to unload a pallet using a stand-up forklift. It was raining at the time. The forklift slipped and her leg was caught between it and a rail. She suffered a broken ankle.,1
An employee accidentally ate a bar of industrial soap and was hospitalized.,1
"A snowplow was being assembled. While the plow's A-frame was hoisted to a height of 2-3 feet, the hoist hook slipped and the A-frame fell, striking and breaking an employee's foot.",1
"An employee was using a table saw to a rip a beveled edge in a 2-by-8. His right hand contacted a blade on the saw, which caused the amputation of several of his fingers. The blade was unguarded at the time.",1
"On June 7, 2021, an employee was standing on a 6-foot fiberglass step ladder, addressing an issue with a heat pump. The heat pump was turned on to build pressure. While checking the refrigerant in the heat pump, the employee contacted a wire, was shocked, and fell from the ladder. The employee was hospitalized, having suffered electrical burns to the left thumb, index finger, and middle finger, as well as a bruise to the left arm from the fall and neck/back strain.",1
"An employee was using a plywood press on a gluing line. A piece of plywood got stuck. While he was trying to release it, the press actuated and crushed several of his fingers. He suffered crushing injuries and amputations to the fingers.",0
"An employee was helping to remove excess tools and equipment from a bucket barge unloader. A roller slipped as the employee was lifting it and pinched his right index finger, amputating the fingertip.",0
"An employee's left ring finger was crushed and partially amputated above the first knuckle, under the nail.",0
"An employee fell after stepping onto a pallet. The employee's foot went between two of its boards during the fall, and the employee's ankle was broken.",1
An employee was climbing up on a lift gate trailer. He slipped and his right ankle was caught on the steps. He suffered a broken right ankle and a laceration to the top of his right foot.,1
Four employees were moving a supported scaffold. The scaffold collapsed and struck one of them on the head causing a contusion.,1
An employee suffered a hand injury while unjamming a machine.,1
"An employee was using a popup saw to cut 2-by-4s. When it popped up to cut the board, the saw amputated the pinky, ring, and middle fingers from one of the employee's hands.",0
"An employee was undergoing wilderness training near a mountain. He was walking down a path, acting as a carrier during a four-point stretcher lift of another employee, when his foot caught on a rock and twisted. He suffered spiral fractures to the right tibia and fibula.",1
An employee was working at the main register when she fell to the floor and lost consciousness. There was an issue with the air conditioner at the time.,1
An employee had been packing food orders in the warehouse and placing them onto a cart. The employee stepped back and fell onto the floor. The employee sustained a fractured right hip and a strained left shoulder.,1
"Employee was carrying paint up a ladder. When he reached the top, the ladder slipped out from under him and he fell to the ground. He suffered a left ankle injury, and his jaw struck a bollard on the way down.",1
"An employee was assembling a trailer at ground level. He tripped and fell backwards, hitting another trailer behind him. He suffered a displaced fracture of the ribs on his right side and was hospitalized.",1
"On June 7, 2021, an employee stepped back onto roofing material that covered an opening in the roof and fell 15 to 20 feet through the opening onto the concrete floor below. The employee suffered a broken wrist and contusions to the pelvis and spine.",1
"Employees were unloading a pallet of large forklift forks from a flatbed trailer using another forklift. The pallet cracked as it was picked up, and one of the forks fell to the ground and crushed an employee's foot. The employee was hospitalized.",1
"While walking by a desk, an employee tripped and fell striking an office chair. The employee sustained a fractured right humerus and a dislocated right shoulder.",1
"An employee was pressing electronic boards to size from a long electronic board sheet. The employee's hand was caught in the power press's point of operation, which amputated the index and middle fingers and partially amputated the ring and little fingers.",0
"An employee was cleaning rollers on a roller oven. He was pulled into the box of the oven, suffering injuries to the right leg.",1
"An employee was using a vertical band saw to cut metal tubing. As the employee was wiping down the metal tube with a rag, his hand contacted the saw blade resulting in a fingertip amputation.",0
"An employee was walking over to a forklift in order to talk with the forklift operator when the forklift backed out into the aisleway, striking the employee's right ankle. The employee sustained fractures to the right foot and toes as well as dislocations and was hospitalized.",1
"An employee was unpacking two suspensions that were bolted together with a razor-sharp angle bracket. While the employee was using a box end wrench to unscrew the bolt, the suspensions shifted and caught the employee's right index finger. The fingertip was amputated behind the nail.",1
"An employee was cleaning a positive displacement pump. As he was checking for oil on the hose, his finger contacted the shear of the pump and he suffered an amputation.",0
"An employee was cleaning up a work area after conducting pipeline construction and excavation operations. The employee developed severe leg cramps and was hospitalized, suffering from heat stress.",1
"An employee was feeding logs into a wood chipper when a log stopped the blade. While unjamming the chipper, the employee's right hand was caught between the log and chipper chute and his middle fingertip was amputated.",0
"An employee was stepping down off a ladder when he slipped and fell, breaking his left ankle.",1
"An employee was placing fiber optic cable on a utility pole line. He climbed the pole and was swapping a lasher machine from one side of the pole to the other when there was an arc flash between the energized, 14,400-volt line and his work belt. He suffered burns to the upper body and was hospitalized.",1
"On June 8, 2021, after operating a remote-control overhead crane in a steel-making plant, an employee became ill, suffering from leg cramps. The employee was hospitalized, suffering from possible heat stress.",1
"On June 8, 2021, an employee was running a mill in the mixing department when he began cramping and did not feel well. The employee subsequently became ill and was hospitalized for heat exhaustion.",1
"At about 7:00 a.m. on June 8, 2021, a Border Patrol agent slipped while chasing a group of people and fell to the ground, breaking his left leg.",1
"On June 8, 2021, an employee was walking toward a gate when she slipped and fell down a slope. She suffered a dislocated hip and a broken leg and was hospitalized.",1
"An employee tripped over a stair, fell, and struck her head on the floor, losing consciousness.",1
"An employee was carrying a push broom down a ladder. The employee slipped and fell backwards, landing on the concrete floor and the push broom. The employee suffered bruised ribs, a broken right arm, and lacerations to the lower lip.",1
"An employee was connecting a service drop to a pole from a 28-foot ladder. A strand came loose and the employee fell to the concrete, suffering fractures to a hip and ribs.",1
"An employee was unloading a grocery truck on a dock. As he was setting a dock plate between the truck and the dock floor, his right foot was caught under the dock plate. He suffered a fracture to the second metatarsal.",1
"An employee fell down a flight of stairs, sliding down them on his back. His head struck the first step and his back hit the next step. The employee was hospitalized for head and back contusions.",1
An employee slipped on a puddle of water near an outpatient drop-off area. She suffered a broken right kneecap.,1
An employee was hooking up a fitting to a fire hydrant. Pressurized water from the hydrant knocked the employee to the ground. He suffered a dislocated right arm and a broken right leg.,1
"An employee became ill after completing outside welding work at 2:30 p.m. He was hospitalized at 9:30 p.m., suffering from dehydration.",1
"An employee was working on a deck immediately behind a hatch. A sailor came up through the hatch, which slipped from the sailor's grasp and fell backwards onto the employee. The employee developed a left-flank hematoma.",1
An employee was using a nail gun to attach metal plates to trusses. A nail from the gun deflected off a metal plate and impaled the employee's left index finger.,1
"An employee was preparing to pour concrete footers when a piece of metal post fell and struck the employee on the calf. The metal lacerated an artery, and the employee was hospitalized.",1
"An employee was supervising a go-kart track when he was struck by an oncoming go-kart, resulting in a head injury and bruises on his legs.",1
"On June 8, 2021, an employee was filling a mobile nurse tank with ammonium hydroxide. A hydrostatic valve failed and the chemical burned the employee's buttocks.",1
"An employee fell while unloading and loading a dishwasher, landing on the floor and suffering multiple fractures.",1
An employee was shocked while replacing an electrical pole resulting in cardiac arrest and burns to both feet.,1
"An employee was setting up a bead roller. The tip of his left index finger was within the point of operation when the machine cycled, crushing part of his left index fingertip. He suffered an amputation to the finger.",0
"On June 9, 2021, an employee tripped and fell over the edge of a concrete parking lot block stopper. The employee suffered injuries to the head, right elbow, and right wrist and was hospitalized for wrist surgery.",1
An employee's right hand was caught in a rotating cement mixer. Two of the employee's fingers were amputated.,1
"On June 9, 2021, an employee was closing double doors that a customer had left open when her ring finger got caught between the two doors, resulting in the amputation of her ring finger.",0
"On June 9, 2021, an employee developed a hernia while stretching to install plastic sheets. He was hospitalized.",1
"On June 9, 2021, an employee tripped while fixing an HVAC system and fell onto the system. Three fingers on his right hand were amputated.",0
"An employee had just closed the back of his company truck and was walking to a work area when the truck began to roll backward. While he was trying to enter the truck, the driver's-side door struck him and he fell to the ground. He suffered three cracked ribs and was hospitalized.",1
An employee fell from a ladder while stocking shelves. The employee was hospitalized.,1
"An employee was working to pull out an enclosed cab tractor that was stuck. A chain was hooked to the front of the tractor and the tail end of a flatbed truck. The tractor began to inch forward when the chain parted. The chain went through the windshield of the tractor and struck the employee in the chest resulting in a chest wounds, a broken left collarbone, and a collapsed lung.",1
An employee suffered heat stress while conducting on-the-job training.,1
"An employee was getting into an electric cart using a strap for assistance. The strap broke and the employee fell to the ground, hitting a concrete curb.. The employee suffered trauma to the side of the head and face, the left leg and knee, and both arms.",1
An employee was transferring hot oil from one tank to another. The bottom of the first tank ruptured and hot oil burned the employee's body.,1
"An employee was standing at a manufacturing turnstile that held coils. The turnstile was turned on and moved to its ""home"" position. The employee's boot was caught under the turnstile plate, which fractured and dislocated his toes.",1
"An employee placed a part on a CNC bend machine. The employee's right middle finger went into the bend machine along with the part, resulting in an amputation.",0
"Employees were moving an oil rig's horse head out of the way so they could install a blowout preventer. As the operator picked up the winch lines, the two floor hands began moving the horse head to the side. The horse head flipped over, and an employee's finger was caught in the winch line and the horse head's bridle cable. The finger was lacerated and the fingertip was amputated above the nailbed.",0
An employee was trying to get inside and stop a moving tow buggy when the tow buggy struck a fence. The employee sustained a fractured left pelvis.,1
"An employee was preparing to lay cable. While the employee was straddling a trailer, holding the cable roll, the trailer became unstable and flipped, striking and throwing the employee into a 3-foot deep trench. The employee sustained a broken right femur.",1
"An employee was training on an electric pallet jack. During a turn, the employee's right leg was pinned between the platform of the pallet jack and a metal bollard. The employee suffered a compound fracture to the lower right leg.",1
"On June 9, 2021, an employee suffered dehydration while driving a package car, delivering parcels.",1
"An employee was using a pallet jack to load a trailer. The jack ran over a piece of broken pallet and the handle of the pallet jack struck the employee in the leg. The employee was hospitalized, suffering from internal bleeding.",1
"An employee was unjamming a beef hide from a flesher machine when the flesher wheel closed on the employee's arm, fracturing the upper arm and wrist. The machine was guarded at the time of the incident, but was not locked out.",1
"An employee was working on a wall from a 6-foot-high scaffold. The scaffold fell over and the employee fell, suffering broken wrists and ribs.",1
"An employee was during utility work during the second shift, 7:00 p.m. to 7:00 a.m. At about 9:45 p.m., he began to feel hot and switched to light duty. At about 6:40 a.m., he felt ill and developed heat cramps. He was hospitalized, suffering from a heat-related illness.",1
"While doing general labor, an employee developed signs of heat stress. After going home, later, he was hospitalized for dehydration and heat-related symptoms.",1
"An employee was cutting metal on a horizontal bandsaw. The saw amputated the employee's middle, ring, and little fingers.",1
"An employee tripped and fell to the floor, suffering a broken left femur. She was hospitalized, requiring surgery.",1
"A rotomill was being used to cut up a highway. An employee was on the ground, checking the depth of the cut, when the machine's hydraulic side plate was lowered. Three of the employee's fingers were caught by the cutter blade and injured including amputation of a finger.",0
"An employee was taking a break after helping to unload materials when they passed out, resulting in hospitalization.",1
An employee was operating a pallet jack when his left index finger hit a pole. The finger was crushed.,1
"An employee lost consciousness while installing underground conduit. The employee was hospitalized, suffering from heat exhaustion.",1
"An employee was crossing a street when a vehicle struck him, causing multiple fractures to his left leg/ankle. He was hospitalized.",1
"An employee was driving an electric pallet jack down an aisle when it struck a double-stacked pallet on the forks of another, stationary electric pallet jack. The employee suffered a broken right ulna and radius.",1
"An employee was working in an aerial bucket lift when his left shoulder contacted an energized overhead wire. He was hospitalized, undergoing surgery to the shoulder.",1
"An employee fell while working at a counter. She suffered a broken left hip and was hospitalized, requiring surgery.",1
"An employee was using a foot-pedal-controlled sheet roller to roll ladder cages. The roller crushed his right index finger and he was hospitalized, undergoing surgery.",1
"On June 9, 2021, an employee fell through a hole in floor grating. The employee's arms broke the fall, causing a dislocation to the right shoulder.",1
"An employee fell while climbing out of a service counter window. The employee landed on the floor and suffered an injured left knee, with a hematoma.",1
"An employee fell while getting off a two-step ladder, landing on the floor and suffering a broken hip. The employee was hospitalized and underwent surgery.",1
An employee was operating an R-panel roll former. He began to clean metal shavings on the top roller (non-power driven roller) with an abrasive pad. The employee's left hand was pulled between the top and bottom roller (power driven roller) and became trapped. The employee tried to free his left hand with his right hand and both hands were caught between the rollers. Both hands sustained lacerations and his left hand was medically amputated.,0
"An employee was training to use a forklift. While the forklift was turning, the employee's left arm was caught between it and a rack. The employee suffered a broken wrist and was hospitalized, undergoing surgery.",1
An employee was repositioning a rubber blanket over energized equipment. A phrase-to-ground contact caused burns to the employee's neck and face area.,1
"An employee was trying to stop a forklift that was rolling back. The forklift ran off the edge of a ramp and flipped onto its side, crushing the employee. He suffered a broken femur and a crushed ankle.",1
"An employee was delivering supplies to a roof when they began showing signs of heat exhaustion, resulting in hospitalization.",1
"An employee had been pouring and mixing concrete on June 8, 2021. The employee came into work the next morning, felt ill, and was sent home. The employee was hospitalized with dehydration.",1
"An employee was cleaning a spray paint hopper bucket with a pressure washer. The employee reached down to adjust the position of the bucket with his left hand when his left index finger contacted the water from the pressure washer, resulting in a laceration that required hospitalization.",1
"An employee was being trained on using a spotter truck to connect a loaded trailer. The spotter truck backed into the trainer, breaking their left leg.",1
An employee developed heat-related dehydration and became dizzy while making deliveries. He was hospitalized.,1
"An employee tripped and fell while delivering mail, suffering a broken hip.",1
"An employee was constructing a new electrical distribution line. While connecting a neutral line near an energized primary phase, the employee's face contacted the energized phase resulting in burns to his face and arm. The employee was hospitalized.",1
"An employee was moving steel pieces on a cart. The cart got stuck on a rail track and collapsed. The employee's finger was pinched between two pieces of steel, and the employee suffered an amputation.",0
An employee was installing plant material when they began to feel cramps in their legs and abdomen. The employee was hospitalized due to dehydration and signs of heat exposure.,1
"An employee was helping move lumber to a dumpster. The employee struck a 2-by-4, which broke the employee's skull at the right temple.",1
"An employee shut off a planer machine and lifted the door to free a jammed board. The centrifugal force of the cutter head was still moving and when he pulled the board back, the cutter head caught his right hand, resulting in four finger amputations and a laceration to the thumb.",1
"An employee was in a manlift, troubleshooting the pilot for the main burner on a furnace. The furnace door was opened and contacted the manlift basket. The employee fell about 8 feet and suffered contusions to his left thigh, knee, and shin area.",1
Employees were moving bird carts from the bird truck into the layer house. An employee's left middle finger was caught between the cart he was moving and the metal housing for the load bar. The employee's left middle fingertip was partially amputated.,0
"An employee was working on a scaffold when they were exposed to soda ash from work being performed 50 feet away, resulting in hospitalization due to lung irritation and an allergic reaction.",1
An employee was performing maintenance on a machine when they suffered a partial amputation of the right ring finger.,1
"An employee was exiting the rear of a rail car by the fixed ladder on the rail car when they fell approximately 18 feet, resulting in a fractured wrist and laceration to the face that required hospitalization and surgery.",1
Employees were disassembling a lattice boom crane. The crane had been lowered to a working height slightly above ground level and was also being supported by an assist crane. The injured employee was removing one of the connector pins when a section of the boom shifted downward and contacted his right foot resulting in a crushing injury to the foot and toes.,1
"An employee was moving a load from the mold area to the melting area. The employee was lowering the mold when his pinky finger was crushed by the mold, resulting in a broken finger.",1
"An employee was using a circular saw when the saw jumped and his left index finger went into the blade, resulting in amputation.",0
Two employees were moving a piece of heavy equipment when a wheel caught in a floor drain. The machine tipped over and struck an employee's leg fracturing their femur.,1
"An employee was operating a band saw with a shuttle vice and a machine vice. The machine vice closed on the employee's pinky finger, resulting in a fingertip amputation.",0
An employee and two co-workers were using a crane to move a work reel weighing approximately 6.7 tons onto a frame for production. The employee was acting as a spotter when their hand was crushed between the frame and the base of the reel being lowered by the crane. The employee suffered a left middle fingertip amputation.,1
An employee and his crew were at a remote worksite excavating holes to inspect and treat utility poles when the employee began to feel ill due to the heat.,1
"Two employees were in an excavation with benching, installing conduit along its entire length. The trench collapsed and the bench wall struck one of the employees. The employee suffered a broken right wrist and rib fractures on both sides, as well as internal injuries. The employee was hospitalized.",1
"An employee was operating a backpack blower while on a stand-on mower when they hit a curb and tripped. The mower landed on the employee, resulting in a leg fracture.",1
An employee was placing plastic over duct work when they tripped and landed on the duct work. The metal duct work lacerated the employee's forearm.,1
"An employee was guiding a piece through a rolling machine when the foot pedal was actuated and his right hand was drawn into the rollers at the point of operation, resulting in a partial amputation of the right ring finger.",0
An employee drank from an electrolyte solution bottle in the refrigerator that had been filled with degreaser. The employee became sick and was hospitalized.,1
"On June 10, 2021, an employee was stacking a pallet full of textbooks onto a rack about 12 feet high using a reach truck. The employee got out of the reach truck to check on the pallet of books when the books fell toward him. As he ran to get away, he fell on the floor and a book hit his right leg, resulting in a fracture to his right ankle that required hospitalization.",1
"An employee was carrying pots and pans to a drying rack when they slipped and fell, resulting in a broken leg that required hospitalization and surgery.",1
"An employee was exiting her semi-tractor when she fell off a step on the tractor, resulting in an L2 vertebra fracture.",1
An employee was painting a wall from a ladder. The employee fell to the floor and suffered a separated wrist and three broken fingers in his left hand.,1
"An employee was performing a clean-in-place process and took pipes apart. The pipes contained pressurized hot water that burned the employee's head, neck, and back.",1
"An employee tripped and fell to the floor, suffering a broken leg.",1
"An employee was putting blanks from aluminum downspouts in a rollforming machine when a blade contacted their left thumb, resulting in a fingertip amputation. The machine was unguarded at the time of the incident.",0
An employee was pushing a row of carts towards the cart manager when he lost his balance or grip on the carts and fell. The employee sustained injury to the left hip and upper leg.,1
"A USPS mail carrier was walking to a resident's door with a heavy parcel. As the carrier moved from the side of a carport to reach the front porch, the parcel hit the top of the carport. The carrier fell backward and suffered a broken right fibula, tibia, and ankle.",1
"At 3:36 p.m. on June 11, 2021, an employee was using a cutting torch to cut the end off a 55-gallon drum that had been filled with hand sanitizer. The drum flashed and the employee suffered a thermal burn to the left side. He was hospitalized.",1
Employees were troubleshooting a machine when the machine amputated an employee's right index fingertip.,0
An employee was unloading freight when the storage system failed and freight slid down from the storage racks. The employee was struck by the freight and suffered a broken leg.,1
"While walking up steps in the dishwashing area, an employee tripped over a step and fell to the floor sustaining a fractured hip.",1
"Around 6:45 PM on June 11, 2021, an employee was troubleshooting a milk filler machine that he was operating. The machine moved, causing a laceration to his right hand that required hospitalization.",1
"An employee was inspecting a valve on a product line when the valve became dislodged, causing the employee to fall to the floor. The employee was hospitalized with fractures to the jaw and left wrist, and a laceration above the right eye.",1
An employee was walking down a hallway in the office when they slipped and fell sustaining a fractured right knee and right elbow.,1
"An employee removed a cap while prepping a tote in a wastewater treatment area and was exposed to sulfuric acid, resulting in chemical burns.",1
"On June 11, 2021, an employee was hooking a dolly up to a tug hitch. The employee's left middle finger was pinched between the dolly tongue handle and tub hitch. The finger was amputated.",1
"On June 11, 2021, an employee developed Legionnaires' disease and was hospitalized.",1
"An employee was installing flashing above an overhead door while on a scaffold when he lost his balance and fell to the concrete driveway below, resulting in a compound wrist fracture, a fractured heel, and a head laceration.",1
"An employee fell while entering a building, landing on the floor and suffering a broken hip.",1
An employee was cutting a piece of wood with a saw and amputated his left index finger.,0
Employees were lifting a dumpster out of a compactor when the load shifted. An employee's finger was caught between the fork and the dumpster resulting in amputation of his left pinky finger at the first knuckle.,0
"On June 11, 2021, an employee was reaching for a part when a machine cycled, causing an amputation to the employee's right middle fingertip.",0
An employee had been troubleshooting an extruder machine. The employee was struck by steam that came through a bolt hole and sustained second degree burns to the neck. The employee was hospitalized.,1
"While taking a level reading from a silo, an employee stepped out and slipped on a mixture of condensation and mud. The employee fell to the ground and sustained three broken ankle bones.",1
"On June 11, 2021, an employee bumped into an air-actuated cylinder while turning to walk. The employee suffered a contusion and hematoma to the right leg and was hospitalized.",1
"An employee was getting in their vehicle when someone shot them through the door of their vehicle, resulting in a right hand injury.",1
"An employee was running an edger. While pushing a log through the edger, the log kicked back, striking the employee in the stomach. The employee sustained a cut to his stomach.",1
"An employee was adjusting a valve for an air cylinder to synchronize the lifters to lock a carriage on a conveyor line. He actuated it to cycle to check the adjustment. When it cycled, his right hand was pinched between the lifter and the rail and he suffered broken fingers.",1
A maintenance employee was trying to remove a chicken tender from a machine when the machine amputated the tip of his right thumb.,0
"An employee was seated on a rebar mat that was at the bottom of an approximately 8 foot deep excavation. The employee was removing dirt by hand, next to the west wall of the excavation. A portion of the soil wall collapsed onto the employee. The employee was hospitalized with displaced vertebrae.",1
"An employee was helping to relocate a cart when their arm became caught between the cart and a concrete column, resulting in a broken bone in the right forearm.",1
"On June 12, 2021, an employee had finished conducting maintenance on a machine and was closing the door of the machine when their left middle finger was pinched in the hinge, resulting in a fingertip amputation.",0
"An employee was descending stairs. The employee fell at the last step, landing on the concrete and suffering a knee contusion.",1
"An employee was working on an automatic guided vehicle (AGV) that had stalled when they were struck in the right leg by a second AGV, resulting in a fractured right tibia.",1
An employee was standing up from her work station when her foot got caught on the desk. The employee fell to the floor and broke her left hip.,1
An employee was walking from the check-in lobby to the ticket counter. Condensation from a customer's drinking cup had made the floor wet. The employee slipped on the condensation and fell to the floor sustaining a sprained right knee.,1
An employee was carrying a storage bin of clothing down a flight of stairs when he tripped over a shoe that had fallen onto the stairs. The employee fell down the stairs and suffered a ruptured patella tendon in the left knee and a right wrist sprain.,1
"An employee was descending a 3 ft. aluminum ladder after retrieving merchandise and missed the bottom step, falling to the floor. The employee sustained a broken right hip and required surgery.",1
An employee was operating a meat slicer and sustained an amputation to the tip of her finger.,1
"While performing a loss prevention stop, an employee was attacked by an assailant. The employee fell and hit their head on the ground. The employee was hospitalized with a head injury.",1
An employee was operating a forklift when their left foot was caught between the reach truck and racking. The employee sustained a broken and dislocated foot.,1
"An employee was walking and moved to avoid a customer who was also walking. The employee tripped and fell to the concrete floor, resulting in a pelvis fracture that required hospitalization.",1
An employee was operating a wire drawing machine when their glove was caught and drawn into the machine. The employee sustained partial amputations to their left ring and middle fingers.,0
An employee was operating an extrusion machine when they passed out due to the heat. The employee was hospitalized for dehydration and kidney failure.,1
An employee was setting up a spiral cutter in an extrusion bay when they began to feel hot and lightheaded and experienced muscle cramps. The employee was hospitalized due to dehydration.,1
"An employee was trying to connect two bar racks by inserting a cotter pin into each hole. While the employee's finger was in a hole, the top rack shifted, pinching his left index finger and amputating the fingertip.",0
An employee was clearing a jam on a battery machine when their finger got caught between the machine and a battery case. The employee sustained a finger amputation.,0
"On 6/13/2021, an employee was hospitalized after making contact with secondary voltage in a pad mounted transformer and receiving an electric shock.",1
"On 6/13/2021, at approximately 8:22 PM, a security officer was at their post observing personnel at a mall. Two individuals approached the security officer, attacked, and then shot him twice with a gun.",1
An employee was cutting PVC boards using a chop saw and amputated his left thumb and index finger.,1
"An employee was using an 8-foot, A-frame ladder to clean the hopper of an extruder. He finished cleaning and fell less than 7 feet, from the ladder to the ground. The employee sustained a broken leg requiring surgery.",1
An employee was using an air wand to remove sand when hot sand was blown back into the employee's face and under his jacket. The employee was hospitalized with second degree burns on the forehead and right forearm.,1
The injured employee was unloading a trailer with a forklift. He had just stopped the lift and stepped from the operator compartment onto the warehouse floor. Another forklift pulled forward pinning the injured employee between the two forklifts. The injured employee sustained multiple back and leg fractures.,1
"An employee fell from a 10-foot A-frame ladder to the floor, suffering a broken pelvis and broken right leg.",1
"An employee was operating a mechanical punch press when their left hand was crushed by the press, resulting in a finger amputation.",0
"While running the bulk line machine, an employee reached to clean the machine and their right index finger was partially amputated in a pinch point.",0
"A driver was doing maintenance on the gladhand connections on the front of a tank trailer. While climbing up to the catwalk area with a tire thumper and a razorblade knife (to rough up the rubber grommet to create a better seal), he fell. He landed on both feet on the fuel tank steps behind the cab. The tire thumper drove the pocketknife into his left little finger, causing a laceration near the first knuckle.",1
An employee and a co-worker were preparing to change the position of a pump control device for a water filtering system on a tug boat. The employee was loosening a screw when they received an electrical shock to their hand from a 480-volt current and burns.,1
"An employee was carrying materials across a roof. The employee slipped and fell through the roof to a catwalk 10 feet below, striking a valve wheel and the catwalk grating. The employee suffered fractures to the ribs and back, as well as a cut and bruises on the face.",1
"A crimping gun fell out of an employee's tool bag and recoiled after hitting the ground. It struck the employee's chin, fracturing the jaw.",1
"An employee was picking up tools at the end of the work day on an outdoor job site. The employee became ill, suffering from heat exhaustion.",1
An employee was cutting the top of a clothes hanger with a box cutter and cut their finger. The employee was hospitalized for an infection.,1
"An employee fell from a scaffold to the ground, landing on his back. He suffered a broken neck and pelvis, as well as torn muscles. He was hospitalized.",1
"An employee was shackling livestock when his finger contacted the chain and tension bar, resulting in a fingertip amputation.",0
"An employee was checking why a fire exit door was not closing properly. When he moved a protruding piece of metal hardware, the door closed on his right thumb and amputated the tip at the nail.",1
An employee was restocking a soda vending machine when her finger was pinched in the door resulting in a 1/4 inch amputation of the right middle finger.,0
"An employee was exiting the cab of a ready mix truck. He tripped over a concrete pillar that was behind him and fell to the ground, breaking his left arm.",1
"An employee tripped over a security cord and fell to the ground, resulting in a fractured hip.",1
"On June 14, 2021, at 5:30 p.m., an employee collided with a cart being pushed by a co-worker, resulting in a broken left femur that required hospitalization and surgery.",1
"An employee was preparing to move a glass sheet with a rack when the glass shifted and slipped out of the rack, sending the load backward and hitting the employee on the hip. The employee suffered a fractured hip and pelvis.",1
An employee was moving packages from a conveyor to a cart. The employee suffered a hernia and was hospitalized.,1
"A fork truck had been used to place metal concrete forms in place. An employee went to manually adjust the ""L"" sections of the forms by lifting one end with his right hand. The employee was setting down the end of the metal form when it slipped out of his hand pinching the middle fingertip on their left hand. The employee's fingertip was amputated without bone loss.",0
An employee was troubleshooting a slug cutter machine. The employee was wiping grease off of gears to inspect them when their fingertip got pulled through two gears. The fingertip was amputated at the nailbed.,0
An employee was pulling wire through a junction box when an arc flash occurred and burned the employee's hands. The employee was hospitalized.,1
"An employee was attaching a trailer to a semi truck. While the employee was raising the dollies using the landing gear crank, it became difficult to crank. The employee bent down to see if the dolly legs were coming up when the tension in the crank caused it to come back and hit the employee in the face. The employee suffered a broken jaw.",1
"An employee was on a forklift, preparing to get a pallet of tile down from storage racks. He fell to the ground and suffered a broken shoulder that required surgery, as well as head trauma.",1
"An employee was climbing a ladder to access a roof when they fell off the ladder, resulting in injuries to their right ankle and left ring finger.",1
"An employee was attacked at work, suffering a broken jaw and lacerations.",1
"On June 14, 2021, at approximately 11:00 AM, an employee was on a mezzanine handing a tool to a co-worker beneath him. The top rail of the mezzanine's guardrail broke and the employee fell 9 feet to the concrete floor. The employee was hospitalized with fractures to the left hip and left elbow.",1
"An employee was standing about 15 feet away from a concrete truck. As the truck moved up a ramp to dump its load of concrete, one of its tires threw a rock that struck and fractured the employee's left leg. The employee was hospitalized.",1
"An employee removed a piece of plywood to lay down some pipe, then moved to lean the plywood against a wall. The employee fell through a 3-foot by 4-foot hole that had been concealed under the plywood, landing 8 feet below in a crawlspace. The employee suffered a hip injury and was hospitalized.",1
A railing gave way causing an employee to fall 4 feet in a warehouse. The employee was hospitalized for a back injury.,1
"An employee was about to kosherize a product line, having just switched a hose from another line after draining the water out of it. When he opened a valve to start the process, 200-degree Fahrenheit water hit him in the left leg and foot, burning him from the thigh down.",1
"On June 14, 2021, an employee was operating a CNC brake press. The employee was holding a part while making a second bend when their thumb was pinched between the side of the machine and the part being bent. The employee sustained a partial amputation to the thumb.",0
"An employee slipped and fell on a piece of equipment, suffering two broken ribs and a collapsed lung.",1
"Employees were trying to unload a grain bin. The unload holes were plugged up, so they cut a hole in the side to drain the bin. One of the employees stepped on a nearby U-trough auger and his left foot went through a part of the auger. The auger caught and lacerated his foot.",1
"An employee was delivering a load of caustic liquid to a facility when he stepped in a puddle of unknown chemical composition, resulting in chemical burns to his right foot that required hospitalization.",1
"An employee was trying to keep a wild steer in a holding pen by holding the gate latch down. The steer popped the lock and pushed the gate open, striking the employee in the head and knocking him to the ground. The steer stepped on him. He suffered a broken rib and a broken left leg.",1
"Employees were removing an exterior wall panel from a building. As the panel was being lowered down by a winch and a tagline, it hit a swing stage scaffold and broke into several pieces. The panel fell about 15 feet to the scaffold below and struck an AKT employee. The employee suffered two broken ribs, an internal laceration, and a puncture wound on the side of the chest.",1
"An employee was using an industrial drill, drilling holes for footings. The kelly cable drive was not retracting properly on the machine's drum, so the employee tried to disconnect the cable to re-spool the drum. He backed out the threaded pin from the kelly drive clevis that was holding the cable drive end. As he tried to push the pin through, his right middle finger was pinched in the clevis and cable. The finger was amputated at the first joint.",0
An employee was operating a wrapping machine when her right thumb and index finger were caught in the teeth of the machine's spinning blade. Both were amputated.,0
"An employee developed leg cramps while climbing an electric pole. The employee was hospitalized, suffering from dehydration.",1
"An employee was standing on the fourth or fifth rung from the top of a 10-foot A-frame ladder, using an impact drill to remove cottonwood debris from louver screens. He fell to the concrete floor below and suffered injuries to the right side of his body: a wrist fracture, broken ribs, a pelvic fracture, and a partially collapsed lung.",1
An employee was installing equipment on a rail car. The employee developed heat-related illness and was hospitalized.,1
An employee was working on a mold on an injection machine and stated that he felt ill. The employee was hospitalized with heat stroke.,1
"An employee was in a scissor lift conducting fireproofing activities when the lift tipped over, causing the employee to fall and suffer a fractured leg.",1
"An employee was taking boxes off a pallet and putting them on a top stock cart. She backed up while holding a box and tripped over another box and fell to the ground. The employee sustained a fractured right hip, requiring hospitalization and surgery.",1
An employee was trying to take a blood sample from a monkey when it scratched her left arm. She had an adverse reaction to the antiviral medication she received and was hospitalized the next day.,1
An employee was walking through an open area when high winds caused a crane boom to collapse. Debris struck the employee and broke the employee's right tibia and left foot.,1
"After carrying mail during a summer heat wave, an employee developed heat stress and was hospitalized.",1
"An employee was preparing for a concrete pour from the platform of a scaffolding system. The employee stepped on the platform and fell approximately 17.5 feet to the ground along with a scaffold plank. The employee sustained a fractured left wrist, a sprained right wrist, and facial lacerations and was hospitalized.",1
"An employee was standing on the side of a trailer, helping load a pile hammer onto the trailer. A cable from the crane disconnected and the pile hammer landed on the employee. The employee suffered a broken right tibia and fibula.",1
"An employee was using a bandsaw to cut piping. The blade caught the employee's gloves and pulled in the employee's hands, causing a finger amputation.",1
"An employee was loading freight on a trailer. The trailer pulled away from the dock while the employee was entering/exiting it, and the employee's forklift dropped between the dock and the trailer. The employee's right index finger was smashed.",1
"An employee was sweeping a floor. As she bent to clean under a machine, the broom handle jabbed her eye and injured it.",1
"On June 14, 2021, an employee was setting up a lasering system at a newly constructed commercial building. While anchoring or aligning a frame over a 20-foot by 22-foot floor opening, the employee fell through, landing 10-12 feet below. The employee suffered a cracked vertebra and was hospitalized.",1
"An employee was delivering packages when they began to feel ill due to heat stress, resulting in hospitalization.",1
An employee was cleaning a meat cutter. The cutter activated and its blade amputated the employee's finger.,1
"An employee had just finished installing the traveling cable on an elevator and was standing on the work deck when the hanger failed. As the traveling cable fell, it wrapped around the employee's legs and broke both of his ankles.",1
An employee was repositioning an equipment case on a transport cart and amputated their right middle finger.,0
"An employee was standing between two flatbed trailers. He ducked under one of them to avoid falling machinery, and his left hand was caught between the machinery and the trailer. He suffered amputations to the left index, middle, and ring fingertips.",0
An employee was stepping from a screen deck onto a catwalk. The employee fell over the guardrail and landed on the ground 5.5 feet below. He suffered a broken wrist and a broken left-side pelvis.,1
"On June 15, 2021, an employee was supervising a work crew on a roof job. The employee fell off the roof, landing about 8 feet below and suffering broken bones. The employee was hospitalized.",1
"An employee was driving a forklift down an aisle. The forklift struck a piece of wood, went out of control, and hit a rack. The employee's right thumb was crushed between the rack and forklift resulting in a partial amputation of the thumb.",0
"An employee was on an 8-foot A-frame ladder, using a resin rod to unjam a blowback chute above. The ladder tipped over and the employee fell, landing on the ladder and suffering four broken left-side ribs.",1
"An employee was walking from one facility to the next when they tripped and fell, resulting in an injured pelvis and hip that required hospitalization.",1
An employee was cutting a 4-foot by 8-foot piece of plywood on a table saw. The saw amputated the tip of the employee's left thumb.,0
An employee fell through a floor cutout and landed on the ground approximately 42 inches below. The employee was hospitalized.,1
"An employee fell from a wastewater clarifier, landing 10 feet below and suffering broken ribs and a broken pelvis.",1
"On June 15, 2021, an employee was walking from the pipe fabrication area to a gate outside when he was struck by a company vehicle trying to turn around. The employee suffered a broken rib, a collapsed lung, and a lacerated liver that required hospitalization.",1
An employee was getting out of her chair when she tripped over the base of her chair and fell to the floor. She suffered a broken femur and was hospitalized.,1
"An employee attempted to sit down in a chair, missed the chair and fell backward hitting their head on a vice that was mounted on the workbench.",1
"An employee was using a saw to cut trim that was stuck to the saw's base. When the trim came free, the employee's finger contacted the blade resulting in a fingertip amputation.",0
An employee was filling forklift cylinders with propane gas when the nozzle connected to the cylinder released and the employee was burned by the propane gas.,1
"An employee was walking though the washroom when a barrel that was being filled with caustic liquid overflowed. The employee slipped on the caustic liquid, resulting in chemical burns to their left wrist and right leg.",1
"An employee was on an 8-foot step ladder applying grout around a beam. The employee fell to the floor 68 inches below, suffering a dislocated hip, a femur fracture, and a head laceration.",1
"An employee had just unjammed a warehouse dock leveler. The end of the dock leveler came down on the employee's left middle and ring fingers, crushing them against a container and causing avulsions.",1
An employee was operating a chop saw when it amputated his left thumb. He was hospitalized.,1
An employee suffered heat stress while handling concrete forms.,1
"An employee was working with a titanium target on a copper plate. As he moved it from his left hand to his right hand, it lacerated his right middle finger.",1
"A road grader struck an employee that was performing surveying work. The employee suffered a broken hip, a broken right foot/ankle, and possibly broken ribs and was hospitalized.",1
"An employee was walking the metal decking of a roof when he fell through the decking approximately 13-14 feet to lower level, resulting in a broken wrist, pelvis, femur, and leg.",1
"An employee was working on a workover rig when a suspended rod and clamp struck their little finger and crushed it on an elevator sitting below, resulting in multiple finger fractures.",1
An employee was making a shaft on a lathe when his shirt was caught inside the machine. The employee sustained a broken shoulder.,1
Two employees were lifting a refrigeration unit's aluminum frame off a work table. The frame slid and pinched one employee's right middle fingertip against a bench. The last joint of the finger was amputated.,0
"An employee was chipping wood. The chipper's lid struck the employee, causing broken ribs and a broken arm.",1
"An employee was working on a press and went to remove aluminum scrap. The machine single-stroked one time, catching his right thumb between the punch and the bottom former. The thumb tip was amputated.",0
A border agent developed heat exhaustion while tracking in brush.,1
An employee was working their shift when a customer entered the establishment and pulled a gun on the employee. A shooting occurred. The employee sustained a bullet wound to the right arm.,1
An employee fell while climbing down the ladder of a top stock cart. The employee landed on the floor and suffered a broken femur that required surgery.,1
"An employee was delivering packages by car when they began experiencing symptoms of heat exhaustion, resulting in hospitalization.",1
An employee was unloading chickens into a chicken house when they became dehydrated and were hospitalized.,1
An employee was operating a slitting machine when the core spun and amputated the employee's fingertip.,0
"An employee was setting up a machine when it moved and pinched the employee's left index finger, causing a partial amputation.",0
An employee was operating a hydraulic punch press. The press amputated the employee's finger.,1
"An employee was moving a tool chest when it tipped onto his right leg, bruising it.",1
"An employee was standing in an aisle. A forklift in an adjoining aisle bumped into stock on the shelf between it and the employee, causing 15-20 pounds of plastic totes to fall from the shelving onto the employee's head. She suffered a concussion.",1
"A 19-inch aluminum billet was being loaded onto a homogenizing oven pad with a forklift. Two employees were trying to reposition it using a pry bar when it rolled off the stack, causing a stacking rail or pad backstop to strike one of the employees in the back. The employee suffered four broken vertebrae in the lower back, as well as liver, spleen, and kidney lacerations.",1
An employee was placing a wire reel/spool on jack stands. The employee's right index finger was pinched between the bar going through the reel and the top of a stand. The fingertip was amputated.,0
"An employee was in a lift, pruning a large Ficus tree. The employee fell to the ground 12 feet below and sustained a fractured skull.",1
An employee was on a lift gate unloading product. He fell to the ground.,1
"An employee was cleaning cars when a door shut on his index finger, resulting in the loss of skin near his finger that required hospitalization.",1
"On June 16, 2021, an employee was attempting to adjust a jammed chain on a machine when their left hand became stuck between the chain and a sprocket, resulting in amputation of the index fingertip.",0
The screen door of a large grinder head came open and struck an employee's steel-toed boot. The boot's toe guard amputated the employee's left big toe and second toe.,1
An employee was climbing down an access ladder on a tanker trailer. He fell approximately 6 feet to the ground.,1
"An employee was operating a saw to cut cedar wood. The saw jammed on a piece of wood. The employee was clearing the jam when the saw cycled back down, resulting in amputation of the employee's left hand.",1
"An employee tripped over a power jack, fell to the floor, and suffered a head laceration that required staples.",1
"An employee performing maintenance on a forklift was removing the hydraulic cylinder from the mast, which was elevated on spacer blocks. When the cylinder was removed, it struck the spacer block, causing the inside rail to lower. The employee's left hand was pinned between the inside and outside rails of the forklift, resulting in a crush injury and a laceration between the knuckles and wrist.",1
"An employee jumped off a flatbed trailer to the ground 5 feet below, breaking his left leg.",1
"An employee was descending a fixed ladder on a conveyor system. He fell backward off the ladder onto the concrete floor, suffering a right midfoot fracture dislocation and a left intra-articular distal tibia and fibula fracture. He was hospitalized.",1
"An employee was unloading a tanker full of chemicals into a storage tank. During this process, a pipe at the base of the tank broke and the chemical began running into the containment chamber. One of the employee's attempted to plug the leak with a piece of wood when the air pressure caused the material to discharge in a vaporized form. A second employee entered the area to offer their assistance. Both employees suffered irritation to their respiratory systems and eyes. One employee was hospitalized.",1
"An employee was delivering 200 cases of product to a store when they began to experience nausea and symptoms of heat exhaustion, resulting in hospitalization.",1
"Two employees were moving a pallet of sheet metal from ground level to the ninth floor using a buck hoist. As they arrived on the ninth floor, the sheet metal bowed in the middle and fell over, pinning the employee's legs and resulting in a lower leg fracture.",1
"An employee was working on a pipe at a steel producing facility. Flammable material inside the pipe ignited, causing burns to the employee's face and torso.",1
"An employee was walking into a room when they fell to the floor, resulting in a broken patella.",1
"An employee was cutting wood on a jointer and their hand slipped under the guard, resulting in amputation of the left ring fingertip.",0
"An employee was kneeling down and drilling holes into a form so he could tie the form to rebar. As he stood up, he lost his balance and fell off the ramp to the ground about 15 feet below. He suffered bruising to the left hand and abdomen, as well as facial fractures.",1
"An employee was standing on a ladder, arranging packing material on a top metal shelf. He fell to the ground 6 feet below and suffered a broken hand, rib pain, and an injury to the face resulting in bleeding.",1
"On June 17, 2021, an employee was participating in an emergency preparedness drill when she slipped on a wet spot on the floor and fell, resulting in a fractured knee.",1
An employee was working on a machine with a ball valve that was leaking. The employee was trying to identify the issue when the valve actuated and amputated his left middle fingertip.,0
"An employee was operating a printing press when he felt ill and was transported to the hospital, where he had a heart attack.",1
"An employee was in the back of a truck, pulling a tarp over debris. He slipped on a wet floor and fell on his back, landing on the trailer about 4 feet below. He suffered fractured ribs and laceration to the spleen.",1
"An employee was taking pictures of a tree limb that had been obstructing a billboard when they fell to the ground, resulting in a back injury.",1
"An employee was removing a small section of existing vertical steel attached to an overhead doorway. After almost cutting the steel all the way through with a power tool, the employee began to manually move it with his hand. When the steel came loose, it fell and caught his left index finger between the falling piece of steel and another piece of steel below, resulting in a fingertip amputation.",0
"An employee was trying to open a window when he bumped it with his hand. His right hand went through the glass, which cut his forearm.",1
"Employees were hoisting a garbage chute with a crane. The chute broke free, striking two employees. One employee was hospitalized for numerous injuries.",1
"An employee was standing on a folding chair, hanging a banner. The employee fell to the ground and suffered a shoulder injury.",1
"An employee was walking around a box with a shrink-wrap stretching tool when he tripped and fell to the concrete floor, resulting in a hematoma.",1
"On June 17, 2021, a maintenance employee was on an A-frame ladder replacing a sign. The bottom legs of the ladder crumbled and the employee fell to the floor. He suffered a concussion and a muscle strain to his buttocks and lower back. He was hospitalized.",1
"An employee and a co-worker were preparing to remove a load of mesh from a flatbed. After releasing the ratchet strap that was being used to secure the mesh, the tension on the strap caused the mesh to shift and fall toward the employee. The employee was pushed into a panel behind him, resulting in a fractured left index finger, C5 and C7 spinal fractures, and possible nerve damage.",1
"An employee had just finished cleaning a gear box leak. As he turned the machine back on, the chain grabbed a napkin in his right hand and pulled his index finger into the chain and sprocket. He suffered an amputation to the fingertip.",0
"An employee was standing near a cross rolling machine when they lost their footing and fell toward the machine. As the employee tried to regain their balance, their right hand contacted the roller on the machine, resulting in an index finger amputation and a laceration to the middle finger.",1
"An employee was standing under a screw conveyor. Part of the conveyor caught her hair, pulling on it and causing scalp lacerations.",1
"An employee was weighing ammonium persulfate (APS) for a batch when the chemical sprayed onto the employee, resulting in burns to their face, arms, and chest.",1
"An employee was repairing a telephone line using a bucket truck. The line shocked the employee, burning the employee's arm. The employee was hospitalized.",1
A delivery driver developed heat exhaustion and was hospitalized.,1
"An employee was cleaning under a gumbox. His right ring finger was caught under a gummer paddle, which amputated the fingertip.",0
An employee was in the attic of a residence that was being renovated. Most of the attic floor had been removed. A 3.5' x 3.5' area was covered with a piece of sheetrock. The employee stepped on the sheetrock and fell through it 9 feet to the floor below and sustained contusions.,1
"An employee was cutting chicken with a meat saw. The saw cut the employee's left thumb, causing an amputation.",0
An employee was backing up a yard tractor that was hooked up to a chassis with a loaded container. The chassis with the container flipped over and pulled down the tractor with it. The employee fell off the vehicle and suffered fractured ribs and vertebrae and a fractured wrist.,1
"An employee was performing preventative maintenance on the battery pack of a standup forklift. When he went to re-install the battery pack the electrical connector fell into the work area. As he reached in to retrieve the connector, his other hand was caught by the roller and his ring finger was amputated.",0
"An employee was beginning to weld an angle iron on a new bridge when they fell approximately 51 feet from the bridge to the ground below, resulting in fractures to their face and ribs.",1
"An employee was standing next to a pallet conveyor when she lost her balance and fell onto the conveyor, which pulled in her leg. The employee suffered an open wound to her left leg that required hospitalization and surgery.",1
"An employee became disoriented the morning after work and was hospitalized, suffering from possible heat stress.",1
"An employee was operating a chop saw when the saw blade bounded with the material being cut, causing the material to flip and contact the employee's left middle finger. The employee suffered an open fracture and the amputation of a finger on their left hand.",0
"An employee was connecting a ground power unit to a tow tug. While the unit was being pulled toward the tow hitch, its tow tongue contacted the tow hitch and slipped. The employee's right middle finger was pinched/crushed between the tongue handle and the hitch, resulting in a partial amputation of the finger.",1
"On 6/18/2021, an employee was unjamming a metal frame below a pallet of plywood on the wood line. The metal frame came off the tracks and the employee's finger was caught between the metal frame and the conveyor resulting in amputation of the right index finger.",0
An employee was using a stand-up pallet jack to separate pallets on a dock. The employee struck a guardrail and suffered an amputation to the right little fingertip.,0
"An employee was on top of a 6-foot retainer wall to disengage a tree limb that got entangled in the wall. When the limb was freed, the employee lost their balance and fell 20 to 30 feet on the other side of the retaining wall, landing on bushes. The employee suffered contusions, bruises, and a back injury.",1
"An employee and two co-workers were removing a feed hopper due to a piece of hard resin that had accumulated between the hopper and the mixer. When the hopper was dislodged from the mixer, it pivoted into a new position and contacted the employee's right pinky finger, crushing it between the hopper and the mezzanine floor and resulting in crush injuries and lacerations that required hospitalization.",1
"On June 18, 2021, an employee was operating a truck to move a dumpster out of the company's parking lot and struck another vehicle. The employee sustained hip and pelvis injuries that required hospitalization.",1
"An employee was backing up a pallet truck when they collided with a guardrail and their left foot was crushed between the vehicle and the lower guardrail, resulting in a fractured foot.",1
"An employee was performing a leak test of a gas line when a flash fire occurred, resulting in second and third degree burns to their face and arm.",1
"An employee was exiting his truck to check in with a security/scale house when he was struck by another truck approaching the scales, resulting in a broken left leg.",1
"On June 18, 2021, an employee was mowing the grass with a push mower when they fell and their foot went under the mower. The employee suffered the amputation of their right big toe and trauma to their right foot that required hospitalization and surgery.",1
"An employee was walking to take a break when their knee gave out and the employee fell, resulting in a splintered femur.",1
"On June 18, 2021, an employee was carrying sample bottles from the fume hood to the work station when they slipped on water on the floor and fell, resulting in a dislocated left knee and shattered left knee cap that required hospitalization.",1
"An employee was cleaning a screw conveyor with a shovel. He slipped into the auger, and the conveyor lacerated the arch of his right foot and broke some bones. He was hospitalized, requiring surgery.",1
An employee was carrying natural gas pipe fittings out of a trailer. One of the fittings fell and struck the employee's right thumb as the employee tried to catch it. The thumb was amputated.,0
An employee was assisting a customer with securing their vehicle that was on a trailer when the vehicle rolled forward. His right index finger was caught in a pinch point and amputated.,0
"On June 18, 2021, a roofer was tearing a roof off. As he was walking in an area of the roof containing the original shingles, his foot went through the rotted wood under the shingles. He suffered a twisted ankle and was hospitalized.",1
"An employee was connecting a 4-inch metal flex hose to a connection point. The hose slipped off the connection point and pinched the employee's right leg against a wellhead isolation valve, causing an open fracture to the femur.",1
An employee was sitting in his personal vehicle parked on the side of the road in a road construction zone. A motor vehicle traveling the wrong way on the highway drove into the construction zone and struck the employee's vehicle. The employee sustained two broken ribs and a broken leg.,1
"While dismounting a skid steer loader, an employee contacted the loader and fell to the ground, resulting in a fractured femur.",1
"An employee was stepping down from a stock cart when they missed a step and fell to the floor, resulting in injuries to their head and back.",1
"On June 19, 2021, an employee was removing ductwork when a 10- to 12-inch piece of the ductwork fell onto his left ring finger. Its sharp edge amputated the fingertip.",0
An employee was grinding metal with a grinder when the grinder wheel broke and cut his arm.,1
"While opening a door and stepping backwards, an employee tripped. She fell to the floor, breaking her femur, and was hospitalized for surgery.",1
An employee was removing asphalt from a buggy auger. The employee's right index finger was amputated in a shear point between the spinning auger and the machine's frame. The auger was not locked out at the time.,0
"On June 19, 2021, an employee was working on a pneumatic hopper. The employee was cleaning food out of the machine when it crushed his right middle finger, leading to an amputation.",0
Two employees were putting an unframed glass mirror into a trash gaylord. The mirror broke and lacerated an employee's inner right elbow.,1
An employee was emptying trash into a dumpster. The employee fell through a 6-inch wooden riser in front of the dumpster and suffered a broken leg.,1
"On 6/20/2021, an employee slipped on water and fell to the floor, resulting in a broken leg that required hospitalization.",1
"An employee was cleaning out metal cup casings around a chain, sprocket, and rotating shaft during maintenance. The machine was turned on while the employee's hand was in a pinch point. The employee's fingers were caught in the machine's chain and sprocket, and the employee suffered a broken right arm and possible finger amputations.",1
"An employee was ascending a ladder when they slipped and fell 10 feet, resulting in broken ribs and a fractured pelvis.",1
"An employee was pushing an empty pallet with a pallet jack when the empty pallet got stuck on the pallet jack. The employee tried to get the pallet off the pallet jack while near a post. The pallet jack struck the post and the employee fell off the pallet jack, resulting in a head laceration and possible concussion.",1
"An employee was moving to sit in a chair when it slipped out from under her. Her back and neck struck the chair and the floor, and she suffered a brain bleed.",1
"Three employees had just retrieved a wooden beam from under a section of ductwork. One of them was bending over to pick it up when the duct section shifted and a piece of angle iron slid off it onto that employee's left thumb. The thumb was broken and the employee was hospitalized, undergoing surgery.",1
"An employee was cleaning off a manure belt when the belt grabbed onto his hand, resulting in an amputation of the right arm above the elbow.",0
An employee was unhooking a hose on a chemical reel car. The employee was sprayed with sodium hydroxide and suffered chemical burns to the mouth.,1
"An employee was manually moving a pallet along a conveyor when the employee became caught between the pallet and conveyor roller, resulting in a partial amputation of a finger without bone loss.",0
"On June 21, 2021, an employee was operating a chair leg bending machine. The employee's fingers were caught between the die set and the leg of the chair to be bent; three of the employee's fingers were amputated. The machine was guarded at the time.",0
"An employee was operating a dump pedal during water blasting activities when a 3/16-inch flex lance connection failed, resulting in a puncture wound to the employee's right thigh.",1
"On June 21, 2021, an employee was installing ductwork when they fell approximately 16 feet through an opening in the ceiling, resulting in fractures to their hip and wrist that required surgery.",1
An employee tripped and fell while walking into an office. She suffered a broken right wrist.,1
"An employee was working partway up a 7-foot ladder. He slipped off the ladder and landed on the ground on his feet, suffering a hip injury. He was hospitalized.",1
"An employee was working on a project to install a phone line when they were struck by the back side of a cable trenching plow, resulting in crush injuries to their legs and the amputation of their right leg.",0
"An employee became dizzy and developed a headache while delivering mail. The employee was hospitalized, suffering from heat-related illness.",1
"An employee was driving an all terrain vehicle (ATV) along a fence. When they crested a sand hill, the employee was ejected from the ATV, resulting in four to nine cracked ribs and a bruised lung and spleen.",1
An employee was using a chainsaw and severely lacerated their leg.,1
"On 6/21/2021, an employee was climbing a ladder to inspect a piece of equipment when they fell from the ladder, resulting in fractures to the humerus, skull, and vertebrae that required hospitalization.",1
An employee was laying irrigation pipe when a passing mower threw debris that lacerated and broke the employee's left ankle.,1
"Three employees were demolishing a wall inside a clean room. One of them was holding a base plate while a wall panel was removed. The panel dislodged and fell on the employee's right thumb, injuring it. The employee was hospitalized, requiring surgery.",1
"An employee was spraying weeds from an ATV. While the ATV was driving uphill, its back left tire went into a ditch and it rolled over backward. The employee jumped off and the ATV rolled over onto him, crushing his pelvis and fracturing his sacrum.",1
"An employee was walking down the stairs onto a sidewalk after delivering a package when they were struck by a bicycle, resulting in injuries that required hospitalization.",1
"An employee was standing while providing care to a patient in the back of a moving ambulance. The ambulance made a turn and the employee fell onto wooden cabinets mounted on the wall of the ambulance. The employee suffered back trauma that resulted in hemothorax, that required medical treatment.",1
An employee was attacked by wasps while working from the first step of a ladder. The employee stumbled backwards and struck their head against a field tank. The employee was hospitalized.,1
"An employee was installing handrails on a scaffold. While changing position, she fell, landing on the ground 14 feet below and suffering several broken ribs, a punctured lung, and a non-displaced vertebra fracture.",1
"An employee was pushing extra material through a bonder machine when their right hand contacted the bonder, resulting in the amputation of four fingers at the palm level.",0
An employee was checking the belt tension on an air handler when their left index finger became caught in the machine; the fingertip was amputated down to the end of the nail.,0
"An employee lost consciousness and fell while stocking produce. The employee's head struck a cooler in the fall, causing a cut to the head. The employee was hospitalized.",1
"An employee fell from the right riding step of a garbage truck, landing on the ground and suffering a contusion on the back of the head.",1
An employee was guiding a tram cart that was holding telephone poles when a pole rolled off the tram onto the employee's left foot and crushed it.,1
"Two employees entered a cage to troubleshoot a foam line. While they were inside, the door was closed and a sensor activated a cross-cut saw. One employee's left middle fingertip was amputated.",0
"An employee was looking for defects in a carpet while standing on the floor between a catwalk and the exit roller of a tufting machine. He stepped backward and tripped on the edge of the catwalk, grabbing onto the exit roller of the machine with his left hand in order to catch himself. While doing so, his left index finger went into the keyway hole on the rotating exit roller, which caused his left index finger to be lacerated.",1
An employee opened the top of a blending tank and a hot water hose came out. The employee was burned by hot water.,1
"An employee was euthanizing a cow with a pneumatic knocking tool when the cow swung its head and pushed the tool toward the employee. The tool triggered and its pin struck the employee in the left elbow, resulting in a broken humerus bone.",1
"A temporary employee was trying to help pull a jammed pad through a pad cutter. The cut button was pressed while the employee's thumb was in the path of the blade, which partially amputated the thumb.",0
An employee was delivering mail on a walking route when they began to feel ill and were hospitalized for dehydration.,1
"An employee was installing a 277-volt light fixture while on a 6-foot, A-frame ladder when the employee contacted a phase of the conductor and was shocked, causing him to fall backward off the ladder to the ground below. The employee suffered trauma to their head, neck, and chest.",1
"Two employees collided and one fell, suffering two broken arms.",1
"At 12:04 p.m. on June 21, 2021, an employee was dumping 50-pound bags of ground caraway into a hopper through a screen. The product bridged in the hopper, so the employee slid the screen out of the way and began pushing the product down. The screw feed auger at the bottom of the hopper nipped his right index finger, causing an amputation.",1
An employee was standing in a hallway when an automobile that was in the parking lot crashed into the building and struck the employee.,1
"An employee working on a bridge was going to check paint levels in a paving striper when he fell through a 24-inch gap between two bridges, resulting in a dislocated shoulder, three to four dislocated ribs, a fractured pelvis, and head contusions and lacerations.",1
"An employee was operating a front-riding piece of power equipment when he struck a pallet and fell from the lift to the floor, suffering a broken right hip.",1
An employee was measuring a bar stock to be cut. A chop saw blade amputated the employee's left thumb.,0
"An employee was closing the ramp of a truck. As it closed, the ramp amputated the tip of his left thumb.",0
An employee was cleaning a coffee grinder when it activated and amputated her left thumb.,0
"An employee was climbing a ladder. He fell at the second or third rung, hitting his head on the ground below and suffering possible head trauma.",1
"An employee was using a cutting machine. As he put a wood stick on the machine, his right ring finger was caught in the cutter, which amputated the fingertip.",0
"An employee was adjusting planks for a press when the stack of planks tilted and started falling. The employee tried to catch the planks and they fell on his right hand, resulting in amputation of the right little finger.",0
"An employee became lightheaded while walking, tripped on a bench leg, and fell onto the bench, suffering five broken ribs on the right side.",1
"An employee was operating a filler machine when she noticed a jam and went to unclog it. The employee's right hand contacted the machine between the labeler guards/track and the machine dial, resulting in the amputation of skin on her middle fingertip.",0
"An employee was working from the second rung of a 4-foot A-frame step ladder. He lost his balance and his foot went into an open cabinet drawer. He then fell to the ground, twisting and breaking his right leg. He was hospitalized.",1
An employee was disassembling a pool umbrella when its base fell and broke the employee's left leg.,1
"An employee fell while stepping off a stool, landing on the ground and suffering a broken T12 vertebra.",1
"On June 22, 2021, an employee was working from a raised scissor lift, stepped backward, and fell from the lift onto the ground. The employee suffered a concussion and spinal fractures.",1
"An employee was trying to free a utility pole section for disposal. The pole came loose, struck the employee, and knocked him off the trailer he was working from. He fell and struck his head on the ground, suffering head trauma, lacerations, and possible fractures.",1
"An employee tripped and fell, suffering an elbow injury.",1
"An employee was in a traffic attenuator truck protecting the crew who were putting sign covers on the advance warning signs when a vehicle ran into the back of the truck, resulting in injuries that required hospitalization.",1
A forklift struck an employee as she walked across an aisle. She suffered a broken left leg.,1
"An employee fell while exiting a pickup truck, landing on the asphalt parking lot surface about 22 inches below. The employee suffered multiple fractures to the left femur (including at the neck of the hip socket) and was hospitalized, requiring surgery.",1
"An employee was moving a chain and trolley while preparing to hoist a wooden set wall into position. The chain broke and the trolley hoist struck the employee, resulting in a contusion on their back left shoulder blade, as well as a laceration to the medial aspect of the left orbit.",1
"An employee was pulling a stack of sheet rock that was leaning against a wall to look at a low-voltage telecommunication box. The stack of drywall fell and broke the employee's upper right leg and lower left leg. The employee was hospitalized, requiring surgery.",1
"An employee tripped on a river rock and fell into a shallow excavation, suffering a broken leg.",1
"An employee was helping change trays for a shaker table. As the employee was closing a latch for a tray, it caught his index fingertip. About a quarter of the fingertip was amputated.",0
"An employee was using a flange-making machine to make a head for tanks/vessels. The employee stopped the machine to take a measurement of the head with a tape measure. Their glove became caught and their right hand was crushed between the side roll and the head, resulting in five broken bones in the hand and three broken fingers.",1
"An employee was power washing a sidewalk inside a carwash when the washer hose wrapped around the employee, pulling him and causing him to spin down the carwash tunnel. The employee struck his feet against the track of the carwash, resulting in two foot fractures.",1
An employee was chaining a container on a trailer. His left middle finger was caught between the trailer and the chain. The fingertip was amputated.,1
"An employee was driving a forklift in reverse when it struck a steel pillar, resulting in the amputation of four fingers on their right hand.",1
"On June 22, 2021, an employee was attempting to open an elevator dump pit. When the employee stepped on a brake that was holding up a metal bar, the bar came down forcefully and struck the employee on the left side of the chest. The employee suffered internal bleeding and a possible tear to the aorta. The employee was hospitalized.",1
An employee was poisoned by carbon monoxide from a dishwasher.,1
"On June 21, 2021, an employee developed heat-related dehydration after a full day helping a crew install water services. He was hospitalized.",1
"An employee tore his Achilles tendon while lifting a heavy package. He was hospitalized, requiring surgery.",1
"An employee was assisting a forklift operator in moving boxed materials weighing 259 pounds. One of two boxes fell from the elevated forks and landed on the employee's left leg, resulting in a lower leg fracture.",1
"An employee was thrown from a material delivery tug to the ground, suffering a broken ankle.",1
"On 6/23/2021, an employee stood to walk away from a conveyor belt area when she fell to the floor, landing on her right side and resulting in a fractured right hip.",1
"An employee was discharging concrete into an excavator bucket. The bucket moved and struck the employee's right ear, crushing and lacerating it.",1
"An employee was waiting at a welding line. The head of the weld wheel began to move, and the employee's right little finger was caught between a stationary lifting lug and an outcropping on the carriage passing by. The finger was broken.",1
An employee suffered heat stress and lost consciousness after working a 10.5-hour shift at a hot forge plant.,1
"An employee was delivering auto parts at a salvage yard. A dog startled him and he fell to the ground, suffering a broken hip.",1
"An employee was walking in a parking lot. She stepped in a rut, fell, and broke her leg.",1
An employee was grabbing products from a conveyor when his finger was caught in the ingoing nip point between the conveyor and the backstop resulting in a fingertip amputation.,1
"An employee was disassembling a scaffold. After opening a gate to load a mud bin onto a forklift, the employee fell from the scaffold to the ground. The employee was hospitalized.",1
"An employee's foot was partially run over by a moving mini excavator track, resulting in a fracture.",1
"An employee was mopping hot tar when he tripped backwards over the mop cart. His right arm landed inside the cart, which was half full of asphalt. He suffered second-degree burns to the forearm and hand.",1
"An employee was parking a double pallet jack forklift and collided with a parked reach truck, resulting in a laceration to her left foot.",1
"An employee was pouring oil into a refill port when the oil shot back out onto the employee, resulting in burns to the chin that required hospitalization.",1
An employee was driving a shuttle bus when it collided with another vehicle in a parking lot. The employee developed severe back pain and was hospitalized.,1
"An employee was changing out an overhead coffee filter on an industrial coffee maker when hot water poured down on the employee, resulting in burns to their shoulder, chest, and arm.",1
An employee operating an end rider pallet jack was entering the cooling section of a facility after returning from the trash disposal area when they collided with the rear of a stationary end rider pallet jack. The employee suffered a gash on their leg.,1
An employee was troubleshooting a power outage when an arc flash occurred. The employee suffered electrical burns and was hospitalized.,1
An employee was putting weights back on a rack after lifting them. The employee's left little finger was caught between two weight plates and amputated.,0
"An employee was opening a gate when they tripped on a curb and fell to the concrete ground, resulting in an open head wound and a broken rib.",1
"An employee was separating a concrete form from a vault. The form came off the hoist hook, and the employee's fingertips were crushed between it and the vault. The employee's right ring and middle fingertips were medically amputated.",0
An employee was operating a dock plate while making a delivery when their little finger got caught in the dock plate at the delivery site loading dock. The employee suffered a crush injury that resulted in surgery and a fingertip amputation.,0
"An employee on a ladder was straightening the door hinge on a piece of equipment using a pry bar when the employee fell approximately 5 feet to the concrete floor below, resulting in lacerations to the back of the head and internal bleeding.",1
A forklift struck an employee from behind as it backed up. The employee suffered a broken left leg.,1
"An employee was using a plasma cutter to cut parts on a line's cutoff. Sparks from the cutter came into contact with a flammable liquid that was used to mark parts, and the employee suffered burns to the face, neck, chest, and arms in the resulting fire. He also suffered a head laceration.",1
An employee was cleaning an air valve. A plunger inside the valve actuated and amputated the tip of the employee's right index finger.,1
A Border Patrol Agent trainee became ill during formation run and then began to have seizures. He was hospitalized with heat stroke.,1
"An employee was cleaning a baking machine with a water hose when their left index finger got caught within a chain and sprocket that was driving the machine's conveyor, resulting in amputation.",1
"An employee was searching for a fox den. As the employee climbed up a slope a boulder dislodged, causing the employee fall 10-15 feet. The boulder then pinned the employee to the ground. The employee suffered multiple fractures to the right side of the torso, the collarbone, and the right arm, as well as a laceration to the back of the head.",1
"An employee was removing a piece of debris from a paste pad when their right little finger contacted moving agitator gear, resulting in a fingertip amputation.",0
"An employee was aligning and feeding pipes into the galvanizing tank at a charging station when the pipes slid in at an angle, resulting in the molten zinc shooting up the pipe and onto the employee. The employee suffered burns to their right wrist.",1
"An employee was repairing a gutter while on a ladder when they fell from the ladder, resulting in head and foot injuries.",1
"An employee was running when she tripped over a dolly tongue and fell. She suffered a laceration above the right eye and a broken left leg. She was hospitalized, requiring surgery for the leg fracture.",1
An employee was tightening a hose clamp. The hose broke and hot liquid sprayed onto the employee causing third-degree burns to both hands.,1
An employee was operating a brake press to manufacture 18-inch stakes. His right hand was caught in the machine when it activated and the ram bar dropped on his fingers resulting in amputation of his fingers just above the knuckles.,0
"An employee was dismantling scaffolding when they fell to the ground below, resulting in fractures to both wrists.",1
"An employee was walking between pallet racks when he hit his head on a horizontal beam on one of the racks, causing him to twist his right ankle, resulting in a fracture.",1
"An employee was preparing a unit for a new tenant when they fell off a second story balcony to the concrete below, resulting in head trauma.",1
"An employee was on top of a mobile scaffold approximately 5 feet off the floor. While pulling himself and rolling the scaffold to the next work area, the wheel of the scaffold became unstable, and the scaffold fell over. The employee sustained an injured left hip.",1
An employee was putting a nipple on a pipe and was hospitalized for a heat-related illness.,1
"An employee was assisting in feeding a piece of steel into a forming machine when his right hand got caught between the steel and a forming roller, resulting in partial amputations of all fingers on his right hand.",1
An employee was operating a full revolution press. The employee was retrieving a part from the machine in order to gauge it when the press cycled and amputated their left index finger. The press was not locked out at the time.,0
"On June 24, 2021, an employee was pulling wires through the conduit in an attic when he stepped off a rafter and fell 8 feet through the sheetrock ceiling onto the garage floor. The employee suffered a facture to his cheek bone and was admitted to the hospital.",1
"An employee was moving a rolling rack when the wheels caught a lip on the floor and the rack tipped over onto the employee, resulting in a pelvic injury.",1
"An employee was hoisting material onto a rack when the hoist's mandrel became caught on the rack. The employee thought the material was in place and was attempting to unhook the chain from the hoist when their left index finger became caught in the lifting chain/hook, resulting in a fingertip amputation.",1
"An employee was cleaning buildup in a machine using a magnetic wand. The wand got caught in a moving chain and sprocket on the machine, resulting in the amputation of their ring and index fingers.",0
"An employee was struck by a sit down forklift while walking on a ramp, resulting in multiple fractures to the lower right leg and ankle.",1
"An employee was standing behind a parked forklift when they were struck in the lower right leg by another forklift and caught between the two forklifts, resulting in broken bones.",1
An employee was cleaning veneer debris from a conveyor on a slicing machine and sustained lacerations on his left wrist and hand that required hospitalization. The machine was running at the time.,1
"An employee was operating a powered pallet jack while delivering soft drinks when another employee walked in front of him, causing him to stop and jerk the handle back. The pallet jack then rolled onto his right foot, resulting in amputation of his pinky toe.",1
"On June 24, 2021, an employee was exiting the elevator when she tripped on the carpet and fell, resulting in a dislocation/fracture of her right leg.",1
An employee was using a hammer to break sprues off castings when they began to experience symptoms of heat exhaustion and were hospitalized.,1
"On June 24, 2021, an employee was trying to cut a metal stud using a miter saw when the guard came loose and slipped down. The employee attempted to put the guard back on when their left pinky finger contacted the saw, resulting in an amputation that required surgery and hospitalization.",1
"An employee was relocating a knuckle boom truck. The employee placed his hand on the outrigger to brace himself to kick the outrigger pad into position when his left thumb was pinched between the first and second section of the outrigger, resulting in an amputation.",0
An employee was trying to access the back panel of a semi-truck from the outside. He lost his footing on the catwalk and grabbed the metal edge of the outer frame panel and amputated a fingertip.,0
"An employee was dismantling a pole scaffold when they fell approximately 15 to 18 feet to the ground below, potentially making contact with the scaffold as they fell. The employee suffered injuries to their shoulder, leg, and ribs.",1
"An employee was directing an operator in setting a catch basin at an excavation site when the catch basin hit an excavation wall and one of the chains came loose, allowing the catch basin to fall approximately 3 feet onto the employee's leg. The employee suffered a fractured leg that required hospitalization.",1
"An employee was descending a ladder after repairing a dormer on a roof when they fell 10 feet to the ground, resulting in a concussion and a fractured leg and arm.",1
"An employee was deburring a metal beam with a hand scraper. During the de-burring process, the steel beam material was advanced by the CNC machine, pinching the employee's left ring finger between the bottom of the beam and the top of a roller. The employee suffered a partial amputation.",0
"An employee was operating a carding machine when their hand was caught in moving gears within the machine, resulting in the amputation of two fingertips.",0
"An employee was manually rotating a pulley on a pulley wheel in order to clean it when their left middle fingertip was caught between the pulley and the wheel, resulting in an amputation.",0
"An employee and a co-worker were moving pallets when the employee was hit by the corner of the pallet, resulting in a broken toe.",1
"An employee was trying to adjust the wire alignment in knurled wheels on a ladder wire line when the machine cycled and their hand was pulled into a knurled wheel, resulting in a middle finger amputation.",0
"On June 24, 2021, at 11:00 a.m., an employee was on a scissor lift 20 feet high splicing wires together from a panel to the rooftop units inside junction boxes. The employee was shocked, causing him to fall out of the scissor lift onto the ground and resulting in contusions and bruising that required hospitalization.",1
"An employee was securing a toolbox when they were struck in the eye by a bungee cord hook, resulting in an eye globe laceration that required hospitalization.",1
"An employee was lowering a wheeled, steel cage filled with merchandise from the tailgate of a truck. When the tailgate made contact with the ground, the cage shifted and rolled off the gate, striking the employee's left ankle and resulting in a fracture that required hospitalization and surgery.",1
"An employee was driving their motorcycle over a speed bump in the company parking lot when they fell to the ground, resulting in a fractured left shoulder.",1
"An employee was recording data from a motor. He stepped into a hole, causing him to place his hand into the equipment that was still moving after the motor was shut off. The employee's hand was caught in the fan motor belt and pulley resulting in a partial amputation of his right index finger, including the loss of bone.",0
An employee and a co-worker were moving a forklift battery with a pallet jack down a ramp when the battery fell onto the employee's left leg. The employee suffered a fractured tibia and fibula.,1
"An employee was picking stock in an aisle when she was struck by a 400-pound bundle of cardboard boxes that fell from 50 feet above her. The employee suffered injuries to her head, neck, back, and arms that required hospitalization.",1
"An employee was cutting a cap off a pressurized pipe when the pipe burst, resulting in a fractured tibia and dislocated shoulder.",1
"An employee was removing plastic from a float sink line machine when their right hand contacted the rotary valve, resulting in the amputations of their index, middle, and ring fingers down to the first knuckle. The machine was unguarded at the time of the incident.",0
"An employee was using a hammer and chisel to knock out the pin of a hydraulic cylinder on a backhoe when the arm of the backhoe fell approximately 1/2"" and caught the employee's left little finger. The employee suffered an amputation of the left little finger at the first knuckle.",0
"On June 25, 2021, at 3:00 p.m., an employee was throwing brick rocks from a scaffold down to the ground below when he lost his balance and fell from the scaffold approximately 12 feet to the ground. The employee suffered two broken ankles.",1
"An employee completed his work shift and returned by passenger van from the solar field to a nearby parking area. The employee was struck by a vehicle, knocked down, and sustained broken bones in the lower right leg. The employee was hospitalized.",1
"During routine maintenance of the bonnet end cap on a blowout preventer, the cap fell and smashed an employee's right ring finger against another ram bonnet. The finger was amputated.",0
"An employee was operating an upright forklift  and collided with another upright forklift. Part of the machine struck the employee's toe, resulting in a toe fracture.",1
"An employee was loading paper product into a box folding machine when the conveyor system pulled his right hand into the machine, resulting in a laceration on his finger and a broken hand.",1
An employee was bitten on her finger by a cat and was later hospitalized.,1
An employee was performing a facility pre-run (test) check sheet in the propulsion systems laboratory when he lost his balance and fell on an sloped walkway. The employee sustained a fracture to his left wrist.,1
"An employee was manually adjusting a press machine in a maintenance shop when it fell over onto the employee. The employee suffered fractures to the right fibula and tibial shaft, a fractured thumb, and multiple pelvic fractures. The employee was hospitalized.",1
"An employee was operating a foundation drilling rig from the operator's chair when the chair broke at the base and the employee fell 7 feet to ground, landing on his head and back. The employee suffered a broken back and a head injury.",1
The operator of a front-end loader was on the ground helping to move a metal hopper on the loader bucket. Their left index finger was caught between the loader bucket and the metal hopper resulting in loss of the pad of the finger.,0
"An employee was replacing the belt on a pulley to an air handler when his right hand was pulled into the pulley, resulting in a partial amputation of his little finger.",0
"An employee was directing the operator of a digger derrick in placing a wooden utility pole in the ground when the insulated boom of the digger derrick contacted an overhead powerline and the employee's leg contacted the energized utility pole, resulting in third degree burns to his knee and foot.",1
"An employee became lightheaded and fell off a ladder, landing on the ground. The employee sustained a lower back injury.",1
"An employee was assisting a crew in de-energizing a radial section of cable. The employee was switching cables to isolate a section he was working on when a probe contacted a cable, resulting in a shock and burns to both hands.",1
An employee was preparing to break down a machine to clean meat out of the actuator valve when the valve cycled and amputated the employee's right index finger down to the first knuckle.,0
"A driver was removing a load securement strap on a flatbed trailer to offload PCV pipes at a customer location. A pipe (18"" x 20') rolled off the top of the bundle of approximately 7 PVC pipes and struck him on the head. The employee sustained a neck fracture.",1
"At 10:30 AM, on June 25, 2021, an employee was driving a mini loader up an incline when it struck a tree stump and tipped over. Both of the employee's legs were injured.",1
"An employee was using a 15-ton overhead crane to move a large metal table weighing approximately 2,300 pounds. The table fell on his right leg resulting in a fractured lower leg.",1
"An employee was operating a valve to control water flow to the end of a 1/4-inch hose that was being used to clean a drain. The water hose separated from the connector during operation and the employee was struck across the face, resulting in lacerations.",1
An employee was performing an inspection of the boiler breaks through a manway door. There was some material built up on the grate and he went to remove it with a metal rake. He was struck by an arc flash and sustained burns on the upper left ear.,1
"An employee was heading to the ground from a 10-foot-high awning using a 28-foot extension ladder that was tied to the building. When the employee was about 8 feet from the ground, they fell off the ladder and landed on top of shrubs. A piece of branch from the shrubs pierced the employee's buttocks, resulting in hospitalization.",1
"An employee was walking when they slipped and hit their face on a metal container, resulting in a fractured jaw.",1
"An employee was changing a bulk bag underneath a hopper when his left hand became caught on the rotary airlock, resulting in amputations to his index, middle, and ring fingers.",0
"An employee was separating copper on a conveyor. An old-style automobile air bag was on the conveyor and exploded before reaching the employee, who was struck by materials from the bag and suffered 6-inch lacerations a broken left arm.",1
"An employee was operating a pallet jack when a collision occurred, resulting in a laceration and possible broken leg that required hospitalization and surgery.",1
An employee fell off a ladder and was hospitalized.,1
An employee was working to remove product from an 800-ton skin stretch. The employee lost his footing and fell approximately 15 feet from a platform into a safety net in the pit under the stretch operating area. The employee sustained a fracture to the C-7 vertebra.,1
"On June 26, 2021, an employee was walking from the parking lot into work when she slipped on water and fell, resulting in a broken left femur that required hospitalization.",1
"On June 26, 2021, an employee was unloading furniture from a truck when he slipped and fell on the truck's ramp, resulting in a fractured ankle that required hospitalization.",1
"At about 8:47 a.m. on June 26, 2021, an employee slipped and fell on a wet floor while exiting a room. The employee suffered a broken ankle and was hospitalized.",1
"An employee tripped over the open door of a dishwasher and fell, suffering a broken left femur.",1
An employee who had previously been inspecting utility poles experienced heat-related illness and was admitted to the hospital.,1
"An employee was standing near a forklift giving instructions to a forklift operator when the forklift began to move and struck the employee in the right foot, resulting in a fracture.",1
A bike patroller was inspecting a trail while on a mountain bike. The bike hit a rock and the bike patroller fell off and landed on another rock. He sustained a fractured right femur that required hospitalization.,1
"An employee was transferring a charging car into a kiln when his hand became caught between the kiln frame and the transfer car, resulting in a crushing injury.",1
An employee entered the palletizer equipment to correct the alignment of boxed tile. The equipment restarted and contacted the employee's left leg causing a puncture wound.,1
"An employee was removing strapping from a pallet of material. The strap broke and the employee fell to the floor, suffering a broken hip. She was hospitalized and underwent surgery.",1
"On June 26, 2021, a cashier was bitten by an insect. The cashier was hospitalized the next day.",1
An employee was cleaning up in the packaging room when an alarm went off on the cheese knife. He went to turn around and tripped on a hose and fell backward to the floor. The employee was hospitalized with a fractured right hip.,1
"An employee tripped over a piece of plastic banding and fell. The employee sustained a broken knee cap, requiring surgery.",1
"An employee was operating a food processor in the kitchen area of the grocery store. As she was pushing the vegetables into the food processor, her fingers contacted the blade which lacerated her middle finger and amputated the fingertip.",0
"An employee was torching a pipe to remove equipment in a lightbulb factory. The employee took a step back and fell through an uncovered hole in the floor, then slid down a chute into the basement of the facility. The fall was approximately 33 feet. The employee sustained head and back injuries.",1
"An employee was talking to a forklift driver. When the driver left the location, the forklift ran over the employee's foot. The employee was hospitalized with three broken toes and a lacerated heel.",1
"An employee was installing a ramp weighing approximately 500 pounds from the sidewalk to the back of a trailer when his left ring finger became pinched between the ramp and the sidewalk, resulting in amputation.",0
"An employee tripped and fell, hitting their head on a skid. The employee was hospitalized.",1
"An employee was fixing a truck on the side of the road when the driver let down the tag axle, which broke the employee's pelvis.",1
"An employee was delivering mail along an outdoor mail route during a heat wave. After completing the route, the employee was hospitalized, suffering from heat-related illness.",1
A nursing assistant was kneed in the head by a patient while helping the patient. The nursing assistant suffered an embolism and was hospitalized.,1
An employee was holding a door open for a large cart of equipment to come through. The employee's right thumb tip was caught between the equipment and the door frame resulting in the amputation of the thumb tip without bone loss.,0
"An employee was exiting a patient's room when they tripped over the patient's shoe and fell to the ground, resulting in a broken hip.",1
"On June 28, 2021, an employee spent a long period kneeling while performing plumbing services at a commercial establishment. His left knee swelled and he was hospitalized, suffering from a bacterial infection.",1
An employee had been working on a roof. The employee was hospitalized for dehydration.,1
A temporary employee had been shoveling sand and collapsed onto the floor of the foundry. He was hospitalized for heat stroke.,1
"An employee was working on a roof in the heat trying to fix a compressor when he fell from a ladder. The employee was hospitalized with a contusion to the right hip, injury to the buttocks, chest pain, shoulder pain, and renal failure.",1
"An employee was removing bolts on a belt drive. When a bolt was removed, the belt drive twisted loose, swung upward, and hit the employee, breaking his leg.",1
"On June 28, 2021, a pipe spool fell on an employee's left foot, resulting in a broken foot and a broken toe that subsequently required amputation of the foot.",1
An employee was cleaning the tire machine and amputated a fingertip.,0
"An employee was climbing down a ladder on a rail car. The employee's foot slipped on the bottom rung and he fell backward about 2 feet to the ground, hitting his head and suffering a concussion and a contusion to the back of the head.",1
"An employee slipped on a puddle of hydraulic oil and fell, suffering a left knee injury.",1
"An employee jumped from a loading dock to a dumpster and fell in, suffering a kidney injury. He was hospitalized.",1
"An employee was flagging in a work zone on the shoulder of a road when they were struck by a motor vehicle, resulting in fractured ankles, legs, and vertebrae.",1
An employee suffered burns to the arms and face while starting a fire.,1
"An employee was moving wood planks out of a machinery room on an aircraft carrier when they tripped and fell down 8 stairs of an inclined shipboard ladder, resulting in fractured ribs on their left side.",1
"An employee was hand digging in a trench 4 feet deep. As the employee was about to exit the trench using a ladder, he tripped on a pipe and fell against a spreader bar with a locking pin sticking out. The employee's lower torso impacted the locking pin when he fell, resulting in a severe bruise and contusion.",1
"On June 28, 2021, at 8:45 a.m., an employee went to dislodge a door from a double-end trim saw when his hand contacted the saw blade. The employee suffered a partial amputation of the right index finger down to the top knuckle, as well as lacerations to two adjacent fingers,",0
"On June 28, 2021, at around 9:00 AM, an employee was coming down a wood stairway while carrying some materials. He slipped and fell down about 6 to 8 treads to the ground below, fracturing his lower left leg.",1
An insect bit an employee on the back of the left knee while the employee was working in an emergency room.,1
"An employee was loading pipe tubing material onto a machine. The material fell onto the employee's left ring finger, causing a fingertip amputation.",0
"An employee was servicing a box machine. While wiping the gears with a paper towel, the employee was caught by the machine, resulting in partial amputations to their left middle and index fingers.",1
"An employee and a co-worker were unloading a cable spool weighing approximately 500 to 600 pounds from a trailer. The spool shifted and fell from the edge of the trailer onto the employee's lower right leg, resulting in a fracture that required surgery.",1
An employee was pulling a water hose on top of a roof when they slipped and fell onto a skylight. The skylight gave way and the employee fell to the floor. The employee suffered a compound fracture in their right arm and multiple fractures in their left arm.,1
"An employee was on a ladder while untangling a hose reel above a corrugating machine. The ladder collapsed and the employee landed on the ground on his left ankle, resulting in a fractured ankle and tibia.",1
"An employee was rolling an aluminum log on the log table/platform when their left hand was caught between the log and the platform, amputating the pinky fingertip.",0
"Employees were tracing a line of a transformer to conduct repair after the transformer had been struck by lightning. The transformer was for an irrigation machine. Employees dug a ditch and found that there was another primary line which was damaged and not in use. The injured employee was checking this line with a low voltage meter. When he checked the second phase, an arc flash occurred. The employee was hospitalized with burns to his left hand.",1
"An employee was showing a co-worker how to unjam a pneumatic bar in the box drop section of a cup machine when the bar cycled and contacted the employee's right index finger, resulting in a fingertip amputation.",0
"An employee was using a pallet jack to maneuver boxes of merchandise from a box van to a lift gate when the pallet began to roll and the jack handle pushed the employee off the lift gate, resulting in a possible broken ankle.",1
"On June 28, 2021, at approximately 1:00 PM, an employee was adjusting the timing and speed of the bundler and transport modules on a paper bag manufacturing machine. A stack of 25 paper bags became misaligned as it went onto the transport module. The employee was adjusting the stack when his right thumb was caught in the point of operation between the bundler and transport modules resulting in a fingertip amputation.",0
"On 6/29/2021, an employee was climbing a wooden telephone pole using a safety belt and hooks when his foot slipped on the pole and he fell onto a branch, resulting in a cut to his neck.",1
An employee's right arm was fractured on a fin press.,1
An employee was hospitalized due to possible heat related illness while performing postal carrier duties.,1
"An employee was strapping down equipment to a flatbed truck when he was knocked off the back of the truck, landing on the ground and fracturing their tibia and fibula. The employee was hospitalized for surgery.",1
An employee was mopping a room when he slipped and fell sustaining a broken ulna and radius in the right arm.,1
"An employee working on a roof was attempting to move a piece of metal decking when he fell on top of the metal panel and slid off the roof while on top of the panel 13 feet to the ground. The employee suffered injuries to his head, shoulder, and back.",1
"On June 29, 2021, an employee passed out on the job site where heat and humidity was a factor. He was hospitalized for a heart attack.",1
An employee had been delivering packages and was hospitalized for dehydration.,1
"An employee was preparing to pour molten bronze from a pot when the pot erupted and the molten bronze contacted the employee, resulting in burns to his left wrist, hand, and palm. Personal protective equipment was worn at the time of the incident.",1
An employee was clearing a jammed conveyor belt. His fingertips became caught in the belt resulting in amputations to the ring and middle fingers on his right hand.,1
"An employee was closing a trailer door when the door closed on their index finger, resulting in a partial amputation.",0
An employee was hospitalized due to heat stress after delivering mail.,1
An employee suffered heat stroke while working on a construction site.,1
An employee was operating a brake press and amputated their left thumb tip.,0
An employee was using a knife to cut produce in the kitchen and amputated a fingertip.,0
"On June 29, 2021, an employee fell off the back of a parked truck to the ground below, resulting in back pain.",1
An employee was using a manual assembler device when he suffered a fingertip amputation.,1
"On June 29, 2021, an employee was unloading materials from a flat bed truck using an overhead crane and a nylon sling. While positioning the nylon sling to hoist a stack of 6""x12' aluminum round bars that was on top of 5""x12' rectangular flat bars, the round bars shifted, rolled back, and pinned the employee's left middle finger between a round bar and a flat bar, resulting in a fingertip amputation.",0
An employee was putting an oxygen tank in the storage room when the door closed on their hand and crushed their left pinky finger.,0
"An employee was pulling a piece of steel from a scrap pile when a fabricated transmission hoist fell and struck the employee in the back. The employee suffered a left knee injury, a chipped front tooth, and bruised ribs.",1
"An employee was on the roof to perform preventative maintenance on an air conditioning system. As the employee moved to a higher section of the roof, they fell approximately 25 feet through a skylight to the concrete below, resulting in a brain bleed, facial fractures, and a laceration to the carotid artery.",1
The injured employee was assisting a co-worker in moving a wheeled cabinet through a door jamb. One of the cabinet's wheels malfunctioned and the cabinet tipped in towards the door frame. The injured employee was caught between the door frame and the cabinet resulting in a fractured right femur.,1
"An employee bent down to pick up packages on the floor. While doing so, a package fell out of a bag above the employee and struck her on the back of her head and neck.",1
"An employee was installing capacitor wires for switchgear and checking the wire length. During this process, the employee's hand contacted one of the vertical busbars, resulting in a severe electrical burn between their right thumb and index finger that required hospitalization.",1
"An employee was removing a bolt from a radiator using a universal joint and an impact tool. When the impact tool was engaged, the universal joint spun and cut his hand, resulting in a laceration that required hospitalization and surgery.",1
"An employee who had been checking meters was standing by a company pickup truck parked near an intersection along the left shoulder of a road. A utility truck and trailer loaded with utility poles traveling past the parked work truck caught the front left of the parked pickup truck and moved it approximately 25 feet, pinning the employee between the two vehicles. The employee suffered one broken rib and a bruised lung.",1
"An employee was inspecting a load in the facility yard when they slipped from the trailer and fell to the ground, resulting in a broken rib and clavicle and a punctured lung.",1
"An employee was walking when she tripped over a fan cord and fell, resulting in multiple fractured bones in her shoulder and face.",1
"An employee was mowing around a lake using a stand-up mower. The employee stepped off the stand when the mower became stuck. The employee was removing grass under the mower deck and their left hand was struck by the blades. The employee sustained the amputation of the pinky fingertip, and the middle and ring fingers up to the first knuckle.",0
An employee was cutting chicken breast with a meat saw and cut his left thumb resulting in a partial amputation.,0
An employee was pushing pipes and his finger got caught in the pipes resulting in a fingertip amputation.,0
An employee was drying vehicles as they came out of the car wash. His foot slipped into a hole at the end of the track where the roller goes back down. The roller amputated his right leg under the kneecap.,0
"An employee was emptying a mixer when it activated, causing the amputation of one of the employee's fingers.",0
"An employee was setting up a CNC machine for machining metal, using an overhead crane to lower a template (angle iron) onto the machine table. As the employee was lowering the template, he noticed metal shavings on the table. He rested the edge of the template on the table while he cleaned it. When he started to lower the template again, his left hand was on the top of the template to guide it. The template slipped and swung forward catching his left hand between the edge of the machine and the template, crushing his pinky finger and partially amputating his ring finger.",1
An employee was washing equipment with a hose and experienced leg cramps. The employee was hospitalized for heat related illness.,1
An employee had been delivering mail and was hospitalized for heat stress.,1
The injured employee was riding on the back of a golf cart and fell off the cart onto the ground. The employee sustained a fractured right femur.,1
"An employee was carrying a bucket of hot roofing tar. He was walking to the back of the building when the wind blew a tarp into his path and onto his feet. The employee stumbled and hot tar fell out of the bucket, landing on the employee's arms, from the elbows to the hands. The employee sustained third and fourth degree burns requiring surgery.",1
An employee was installing cast pipe at a construction site in high heat conditions and was later hospitalized for heat exhaustion.,1
An employee had been changing out a vacuum head. The employee was sweeping away waste candy when their right index finger was caught between a mold and a guide bar resulting in a fingertip amputation.,0
An employee was delivering mail and suffered heat stress.,1
"On June 30, 2021, at approximately 4:43 a.m., the injured employee was attempting to remove a 3/4"" carbon steel pipe that was stuck in the furnace. A co-worker assisted the employee by operating a forklift with a boom attached to hoist the pipe from the furnace. The injured employee was holding one end of the pipe when the pipe fell from the boom and struck the employee's left thigh. The employee suffered a hematoma on the left thigh and was hospitalized.",1
An employee was found pinned under a forklift and injured.,1
A mechanic was fixing a company van which would not start from the switch inside the vehicle. The mechanic put the van in park and then attempted to start the van from underneath. The vehicle switched into reverse and rolled over the employee. The employee was hospitalized for a lacerated spleen and kidney.,1
"An employee was laying metal panels on the roof at a one-story residential jobsite while it was raining. He slipped and fell about 8 feet to the ground, fracturing both legs. The employee was wearing a harness, but the line was not attached at the time of the fall.",1
An employee had been overseeing a crew installing water lines. The employee was later hospitalized with heat exhaustion.,1
An employee was driving a vehicle down a dirt road when a windstorm caused tree branches to come down all over the road. A branch struck a mirror bracket and glass broke. A piece of glass got into the employee's eye  and lacerated the retina.,1
An employee fell on the floor when her sneaker stuck to the floor while walking into the building. The employee suffered a fractured right arm.,1
"An employee was checking the lowboy trailer and preparing to make a delivery. The employee slipped while climbing down the wet steps of the trailer and fell 3-4 feet. The employee landed on a small step stool at the bottom of the ladder and sustained two rib fractures, a lumbar compression fracture, and a left elbow contusion.",1
An employee was walking when their left foot slid out and the employee fell to the floor resulting in fractures to the right femur and right wrist.,1
An employee slipped while transitioning from the railcar loading deck onto the railcar ladder and fell resulting in a fractured right tibia and fibula.,1
A delivery driver was unloading a flatbed trailer at a delivery site when a steel beam fell from the trailer and struck the driver and fractured their leg.,1
A temporary employee was conducting electrical work at a jobsite. The employee was pushing down a pipe with their left hand and their right hand was applying force on top of the left hand. The employee's left hand slipped and was cut by a piece of metal bracing next to the pipe. The laceration required surgery.,1
An employee was hospitalized after being struck by a forklift.,1
"An employee rigged a piece of heavy commercial equipment in preparation for lifting. During lifting operations, the lifting equipment failed and the chain struck the employee resulting in broken vertebrae and a dislocated collarbone.",1
An employee was working with a torch 15 feet above the slab in high heat conditions. The employee collapsed and suffered heat exhaustion.,1
An employee lacerated their middle finger and fractured the tip of their pinky finger while dropping the tailgate on a truck.,1
"On June 30, 2021, an employee was watching the pans go into the oven and was later hospitalized for a heat-related illness.",1
An employee was unloading pipes from a trailer. A pipe (3.5 inch in diameter) rolled off the trailer and struck the employee's legs. The employee sustained a right leg fracture.,1
"An employee was walking at a job site when he tripped and fell. An electrical disconnect he was carrying landed on his right hand, amputating the pinky fingertip.",0
An employee was cutting metal pipe with a saw when the saw kicked back and struck him in the face and chest. The employee sustained lacerations to the face and chest.,1
"A temporary employee was using a hammer and punch to pre-punch holes in a 500 lbs. beam that was on two sawhorses. A forklift impacted one of the sawhorses, knocking the beam onto the employee's left foo and fracturing it.",1
"An employee was helping to restrain a combative patient. While the employee was restraining one of the patient's arms, the patient thrashed about on the bed and attempted to sit up. The employee was pulled forward onto the handle of the bed and sustained a contusion to the left upper chest. The employee then had cardiac dysrhythmia and a near syncopal event.",1
"An employee transported glass to a jobsite. The installation crew unloaded the left side of the truck first. The last piece of glass weighed 300 pounds. Four employees picked up the glass from the truck. Once picked up, the injured employee started to untie the other side. This caused suspension to shift on the truck and glass panes estimated to weigh 750 lbs. fell off the truck onto the injured employee. The employee suffered a lower back fracture.",1
An employee was operating the stacker when their right hand was caught between the chain and sprocket resulting in amputation of four fingers and the tip of their thumb.,1
An employee unloaded a food truck and began to feel ill. The employee was hospitalized for heat stress.,1
An employee was cleaning around a chop saw when the blade lacerated their left middle and ring fingers.,1
"A 3/16"" nylon rope was being pulled through the employee's left hand as it was being applied to a rotating mandrel. A knot in the rope caught the employee's left pinky finger and amputated the distal and middle portion.",1
"An employee was unloading lumber from a flatbed truck and fell backward off the back of the truck to the ground 4 feet below. The employee was hospitalized for brain swelling, a fractured collarbone, a fractured hip and memory loss.",1
"An employee stepped off the back of his truck. He then took a few steps and his knee gave out and hyper-extended, resulting in a torn tendon in his right leg.",1
"An employee was working at a computer workstation. An idling ambulance was parked outside the building next to the air intake vent that comes directly into the office area on the second floor. The employee experienced headache, dizziness, and nausea and was hospitalized due to carbon monoxide exposure.",1
An employee was using an overhead grid crane when their right middle finger was pinched between the engine head assembly and the transport rack resulting in amputation of the fingertip just below the nail bed.,0
"An employee was repairing a semi-truck that was on a jack. The jack shot out from under the truck and struck the employee in the leg, fracturing it.",1
"A truck driver was standing near the truck with his hand on the edge of the flatbed while a drilling mast was being loaded onto the truck bed. The mast shifted and pinched the truck driver's finger, resulting in a fingertip amputation.",0
A 2500 lbs. tote bag had fallen over. An employee was holding open a loop on top of the bag to accommodate the forks of a forklift. His finger was caught between the forks and the loop and the pad of the right middle finger was amputated.,0
An employee had been operating a pallet jack. The pallet jack moved while recharging and fractured the employee's ankle.,1
An employee was working on a crane's power. He went to turn on the disconnect and it backfired. He sustained an electric shock and burns to his abdominal area and left elbow.,1
An employee was moving a section of warehouse rack beams when one section slipped from his hand and struck his foot. The employee sustained a broken right foot requiring surgery.,1
An employee was on a platform on a concrete truck cleaning dried ready-mix from the chute. The employee fell from the platform to the ground resulting in hospitalization for a fractured hip.,1
An employee had been unloading parcels. The employee was hospitalized with severe dehydration.,1
"A load of cargo from a vessel was being landed on the dock. The injured employee walked towards the load in order to unhook the rigging, when one of the 4-ton round steel bars rolled and came to rest on his left foot. The employee was hospitalized with a fractured left ankle.",1
"An employee was setting up film on a small pack machine. The first bag became stuck on the tape and when the employee grabbed the bag, the machine started. The employee's left index finger contacted the machine's knife bar, resulting in an amputation of about 1/2 inch of the finger.",0
An employee was operating an electric pallet jack when it struck a wall. His left foot was caught between the pallet jack and the wall resulting in a fractured left ankle. The employee was hospitalized.,1
An employee was climbing down the fixed ladder of an asphalt shuttle buggy when he slipped from the top step and fell approximately 10 feet to the ground. The employee sustained fractures to the pelvis and right hand.,1
An employee had been installing internet in a residence and was hospitalized for heat exhaustion.,1
The injured employee and a co-worker were cleaning the jammed auger system of the rotary airlock feeder. The injured employee was using a piece of rebar when his hand and arm were pulled into the auger. His hand was injured and three fingers were amputated by the rotating auger.,0
"An employee was repairing a wrap line machine. While checking the tension of a chain in the machine, the employee's glove was caught by the chain and his finger was pinched between the chain and a sprocket. His left index finger was medically amputated to the first knuckle. The machine was not locked out at the time of the incident.",0
"An employee was walking between a pallet and a wall rack when their foot got caught. The employee tripped and fell, hitting his head/face on the floor. The employee was hospitalized with a bruised orbital area and a cut to the forehead.",1
An employee drove a pallet jack to the fueling station and dismounted the pallet jack before it came to a complete stop. His right leg was caught and fractured between his pallet jack and a parked pallet jack.,1
"On July 1, 2021, an employee was sitting at his desk when he began to smell a sulfur odor, resulting in dizziness, nausea, the inability to focus, and eye sight issues that required hospitalization.",1
An employee was washing the shoulder skin machine and was removing a piece of meat stuck in the roller. Her left little finger was caught in the rotating roller and amputated.,0
"On July 1, 2021, an employee was bending metal parts on a brake press when their right middle finger was caught in the point of operation and partially amputated.",0
An employee was walking from the information desk to the back office when she fell and sustained a broken leg.,1
An employee was assisting the crew in laying the last piece of material. He stepped on the material so it could be welded by a co-worker. The material slid and the employee fell through the hole approximately 30 feet to the ground below. The employee sustained a dislocated hip and injures to the face and forehead.,1
"An employee was operating a lathe when coolant got onto his face. He was hospitalized, suffering from a bacterial infection.",1
"An employee was operating the 5-pound flour packaging machine. While cleaning something on the machine, the employee's hand was caught in the machine resulting in a deep laceration to the right little finger which required hospitalization and surgery.",1
"A powered industrial truck (PIT) operator was speaking to another employee and looked over their right shoulder in order to back up. While backing up, the PIT struck the other employee resulting in fractures, a torn rotator cuff, a crushed right foot, a leg laceration that required stitches, and the loss of the nail on their big toe.",1
"An employee was reaching for an item on an upper shelf when she fell to the ground, resulting in a leg fracture and head laceration.",1
An employee lost her footing and fell while closing a trailer door. The trailer door then struck her on the back.,1
An employee had been repairing a vehicle and felt dizzy and had a rapid heartbeat. The employee was hospitalized for a heat illness.,1
Two employees were working on ladder jack scaffolds that were greater than 20 feet above the lower level. The injured employee was on the wooden plank that bridged two ladder jack scaffolds when they fell to ground below. The employee was hospitalized.,1
A driver was opening the back door of a trailer when product fell and broke their left ankle.,1
"On July 1, 2021, two employees were filling up a grain truck. One employee was standing in the load out area, which is a platform approximately 15 feet high used to observe the level of grain inside the trucks. Employees access this platform via a ladder that is located above the booth pit. The second employee was conducting groundwork and operating the controls that supply the grain to the trucks located behind the booth pit. During this process, the second employee went to use the stairs to climb up to the loading platform. At this time, the booth pit hole was open and uncovered. While the employee was climbing the ladder, the employee fell approximately 24.5 feet into the booth pit and suffered multiple broken bones and lacerations.",1
"On July 1, 2021, an employee was walking in the warehouse when they tripped and fell to the floor resulting in hospitalization for a fractured left hip.",1
"While installing a placard on a truck, an employee fell backward and hit his head on the concrete. He was hospitalized for possible bleeding on the brain.",1
An employee was getting a grave ready for a funeral service. The employee fell into the grave and suffered a broken femur.,1
"An employee was cutting meat on a bandsaw when a piece of frozen meat became caught on the teeth of the blade and jerked the safety plate, which forced the employee's hand into the blade. The employee sustained an amputation to the right ring finger.",1
"An employee was using a string trimmer to cut grass along a fence and was stung by ground bees on the face, arms, and back.",1
An employee was picking up trash and driving a utility terrain vehicle (UTV). The UTV rolled over while coming down a hill and the employee sustained a broken ankle.,1
"An employee was preparing strips of moulding for delivery. The moulding was stacked on a wooden pallet, which the employee grabbed to move the material closer to his workstation. A slat of the pallet broke and struck the employee in the abdominal area resulting in a lacerated bladder.",1
"On July 2, 2021, an employee had just finished loading his truck and was removing a dock plate when its hinge section partially amputated his left ring finger at the first knuckle.",1
An employee was working on a pallet machine to fix the chain when the chain released and partially amputated the employee's right middle fingertip.,0
"An employee climbed up the side of a garbage truck to clear away loose debris on the truck. The employee fell, landing on the ground about 8 feet below and suffering a head laceration.",1
"An employee was unloading product from a truck using a forklift. While stacking the product, one of the pallets fell. The employee got out of the forklift and started picking up the fallen product. When the first pallet fell it struck another stack of pallets, causing them to be unstable. The stack fell onto the employee causing multiple femur fractures.",1
"An employee was driving a forklift in the warehouse. While driving out of the cooler, the employee's foot got caught between the forklift and a pole, resulting in a broken foot.",1
An employee was getting a tarp crank handle out of the way by pushing the handle behind the ledge of a roll-off box. He then turned to pick up a chain that was on the ground to hook to the box. Tension on the handle caused it to release and hit the employee in the head/face. He was hospitalized with a forehead contusion and a laceration to the bridge of the nose.,1
An employee was riding a Segway reading meters. As the employee was riding between two poles a wire that was hanging between the poles knocked him off the Segway. The employee struck his head and lost consciousness. The employee was hospitalized with a neck laceration.,1
"An employee was assembling a vertical dough lift machine which required four bolts to assemble. The employee installed the top two bolts. While attempting to align the holes and install the bottom two bolts, the machine shifted and the employee's left little finger was caught in a pinch point resulting in amputation after the second knuckle.",0
An employee was loading an aircraft with a unit loading vehicle (ULV). He was pulling the ULV when his left foot got caught between the ULV and a lock. The employee sustained a fractured left foot.,1
"An employee was dropping cubes from the flatbed truck to feed cattle. As the employee was clearing out a cake, the hopper door came down and amputated the employee's left index fingertip.",0
An employee was moving a shopping cart filled with cardboard down a ramp to the recycling dumpster. The employee pushed downward on the shopping cart's handle and the cart tipped over causing her to fall to the ground. The employee sustained bruises to her left knee and right ankle.,1
An employee was struck by a motor vehicle while walking to their own vehicle. The employee suffered a broken wrist.,1
An employee was performing a leak test/pressure test on a line set and looking at a pressure gauge. A piece of steel blew off the end of the copper line and hit the employee in the head. The employee fell and suffered a laceration to the back of his head.,1
An employee was moving equipment on a pallet jack when the equipment fell off the pallet jack and broke his ankle.,1
An employee was putting a shaft into a cable machine and amputated fingertips on both hands.,1
"An employee was struck by a customer's forklift while delivering freight, resulting in broken bones in both feet.",1
An employee was stripping a concrete form when it fell on him. He suffered a cracked sternum and was hospitalized.,1
"An employee was collecting hand baskets in a parking lot. A customer in a truck asked for one of the baskets. As the employee was handing one to him, the truck struck the employee and caused him to fall. He suffered a broken ankle.",1
"On July 3, 2021, at approximately 2:00 p.m., an employee parked a forklift next to another forklift. While exiting the forklift, the controls engaged causing the forklift to move and crush the employee's left leg between the two forklifts resulting in hospitalization.",1
"An employee was loading a trailer with pallets of product at a warehouse dock. After stowing the dock plate, the employee entered the trailer to put some airbags in the trailer to help support the pallet loads. While exiting the trailer, the employee's leg fell into the gap between the trailer floor and the dock floor resulting in a lower leg laceration.",1
An employee was hospitalized for a broken clavicle.,1
"An employee was changing a tire on a customer's car when she fell forward, hit her head on the vehicle, and suffered a concussion.",1
"An employee lost his balance on carpeting and fell, hitting a handrail and the wall. He suffered a laceration and a contusion on his forehead and was hospitalized.",1
An employee was cleaning the inside of the mixing machine when the door of the mixing machine struck the employee's right wrist resulting in a laceration and contusion to the right wrist.,1
"An employee was operating a CNC bandsaw with an automatic material loading shuttle and clamping mechanism. The wood that the machine was shuttling into the clamping area was tipping, and the employee reached over to stabilize it for the clamp. The clamp closed on the employee's right index finger and amputated the fingertip.",0
"An employee slipped and fell in a restroom, suffering neck and back fractures.",1
"An employee was using a manlift to observe a leak at a white liquor line. The gasket at the leaking flange area failed and sprayed hot white liquor on the employee, who suffered burns to his side, buttocks, and eyes.",1
An employee was working with a sausage stamper and amputated part of her left middle finger.,1
An employee was walking from a culinary trailer to his truck when he tripped over a cable tray cover. The employee's right knee twisted and he fell to the ground landing on his right knee and resulting in torn ligaments that required hospitalization.,1
"An employee was attempting to put a muzzle on a cat in order to trim its nails when the cat bit the worker, resulting in a puncture wound to the right index finger that became infected and required hospitalization.",1
A Border Patrol agent was apprehending a group of subjects on a ranch and suffered heat stroke.,1
An employee was cutting a squash when the paring knife he was using amputated the tip of his left ring finger.,0
Two employees were breaking up a dog fight and sustained dog bites. One employee was hospitalized for surgery. The second employee received stitches and was released.,1
"An employee was clearing a plug in a drain line. The line broke. Hot water (between 180 and 200 degrees Fahrenheit) gushed out, causing first-and second-degree burns to the employee's lower left leg.",1
"An employee was putting away overstock in a meat/deli cooler. The employee tripped over the leg of a cart and fell to the floor, suffering a broken left hip.",1
"An employee slipped and fell while walking to his truck, twisting an ankle and suffering a foot injury.",1
"An employee was on a loading dock, unloading a full cart of eggs from a truck. The wheels of the cart got stuck on a dock plate and the cart tipped over onto the employee. The employee suffered a concussion, back fractures, and possibly a foot/toe fracture. The employee was hospitalized.",1
"An employee was feeding film into a separator machine when their hand got caught in the rollers, resulting in the removal of skin from their fingers and hand.",1
"An employee was directing a customer to a parking spot. The customer's vehicle struck the employee, pinning them against the wall and causing injuries to both knees.",1
"An employee was painting outside a building from an articulating boom lift about 25 feet off the ground. The lift ran out of gas and stopped working. While trying to reach the ground, the employee fell about 9 feet onto gravel and suffered a compound fracture to the right tibia and fibula.",1
"On July 5, 2021, an employee tripped and fell in a break room, hitting a table and then landing on their right side on the floor. The employee suffered a broken right hip/pelvis and was hospitalized.",1
"A hydraulic lift was being used to move an I-beam. It failed, and an I-beam hit an employee in the chest. He then fell and his face struck the ground.",1
"An employee fell about 5 feet from a ladder to the ground, suffering a broken ankle.",1
An employee was feeding steel into a furnace when a steel rod struck his head.,1
An employee's index and little fingers were caught and fractured between a swinging gate and a stationary gate.,1
"An employee was using a table saw to cut extruded polystyrene. The saw cut the employee's fingers, causing partial amputations to the index and middle fingers.",0
An employee slipped on a grated metal step while entering a truck cab. The employee fell to the parking lot surface and suffered a compound fracture to the left ankle.,1
An employee was laying out plywood on the roof of a building and fell about 15 feet. The employee sustained sprains.,1
"An employee was walking down steps in the hotel when she fell forward, stopping about 10 steps below. She suffered a spinal injury and was hospitalized.",1
"An employee tripped over the power cord for a piece of cleaning equipment as she walked away from it. She fell to the ground, suffered a broken hip, and was hospitalized, requiring surgery.",1
"On July 6, 2021, at 1:20 p.m., an employee was climbing a fixed vertical ladder to a commercial roof in order to install metal coping around the perimeter of the roof. The employee fell about 6 feet off the ladder to the concrete floor below, resulting in a head laceration with swelling and a left ankle injury.",1
"An employee was using an extension wand and sprayer to apply oil to the chains on a moving walkway. While sitting on the threshold of the moving walk's pit, the employee's left foot contacted a pallet (step) and became lodged between a pallet and the turnaround crossbar. The employee suffered fractured bones in his foot.",1
An employee was operating a punch press when his right hand was caught in the point of operation resulting in a crushed right index finger.,1
"An employee was installing a grounding rod next to an electrical panel using an impact tool. He was standing at the edge of a trench which was approximately 2 feet deep. It had rained the previous day so the ground was damp and loose. The tool was placed on top of the grounding rod and it covered approximately 6 inches of the top of the rod. The employee would lift up the tool without exposing the top of the rod and then using a downward force, drive the rod into the ground. One of the times, after lifting up the tool, the ground underneath the employee shifted causing him to lift the tool off the rod as he pulled up on the tool. When the employee began the downward force with the tool, the ground under him gave way causing him to fall forward onto the grounding rod, striking part of his face and his eye.",1
"An employee was standing next to a truck and trailer while poles were being loaded onto the trailer. The equipment struck an overhead powerline and electricity traveled through the equipment and through the employee, resulting in burns to his right thigh and both feet.",1
An employee was operating a roll-up side mechanism on a greenhouse and suffered a right thumb amputation when their shirt was snagged by the mechanism and twisted tightly around his upper arm and hand.,0
An employee fell 12 feet through a skylight and suffered back fractures.,1
"A maintenance employee was unjamming a golf straightener. When the machine was jogged, the employee's finger was caught between the carrier block and the frame and crushed, resulting in amputation.",0
"On July 6, 2021, an employee was crossing a road, holding a 1/4-inch telecommunications strand cable with his left arm. A truck sped through the traffic stop, and the cable became tangled in its rear tires. The cable amputated the employee's left arm.",1
An employee lost consciousness while leaning over to pick up an object. The employee's head struck the warehouse floor in the resulting fall.,1
"An employee was operating a three-wheeled personal electric transport vehicle. While traveling up a concrete grade of approximately 30 degrees, the equipment failed. The employee then attempted to turn left, back down the incline, and the front wheel may have caught on a concrete barrier. The employee fell out of the vehicle, landed on the concrete ground and sustained a broken left femur.",1
"At about 5:15 p.m. on July 6, 2021, after driving a delivery route and delivering packages on a 90-degree day, an employee developed muscle cramps. He was hospitalized, suffering from dehydration.",1
An employee was unjamming a piece of metal from a body maker machine when the machine engaged and caused the amputation of fingers.,1
An employee tripped over a resident's shoes and fell to the floor. The employee suffered a possible bone fracture.,1
An employee was releasing a concrete form from the mold jacket. The mold weighed 800 lbs. and the employee's left index and middle fingertips were pinched when the mold shifted resulting in fingertip amputations.,0
"An employee was working alongside the paver in the heat and direct sun. Around 4:00 p.m., the employee began to feel ill. The employee was hospitalized for heat exhaustion.",1
An employee was cleaning the shower. She bent down to wipe the floors and her hand was caught in the towel rack. Skin was removed from her finger and she was hospitalized for surgery.,1
"An employee completed a clean-in-place (CIP) process. At the end of the process, the employee was disconnecting the hoses and was sprayed with 'rinse water' that may contain CIP chemicals. The employee was hospitalized for ingestion of the chemicals.",1
"An employee was pushing a medical cart in an operating room when they tripped over the wheels of a surgical table and struck the table before falling to the floor. The employee lost consciousness and suffered injuries to their arms, head, and neck, including a hyper-extended neck and tingling and weakness in both upper extremities.",1
"An employee was using a circular saw to cut a 4x4 post when the saw blade contacted his left middle finger, resulting in an amputation of approximately 40% of the finger.",0
"On July 6, 2021, at approximately 8:30 AM a semi-truck was delivering rebar to the site. As an employee went to the rear of the truck to help guide it, a loader grabbed one side of the rebar and caused the other side to bounce and strike the employee on his left leg. The employee suffered fractures to his tibia and fibula.",1
"An employee tripped and fell to the ground, breaking her hip.",1
"An employee and a co-worker were replacing an air filter in a dust collector using a scissor lift. The co-worker pushed the filter with his foot so that the employee on the ground could grab the filter when the employee's finger was smashed between the filter and the scissor lift, resulting in an avulsion and an amputation of the right ring fingertip.",0
An employee was skinning fish using a skinning machine when her glove was caught and skin was removed from her right index finger.,1
"An employee was pouring a 5-gallon pail of waste chemicals into a 55-gallon container. The chemical splashed the employee, who began to suffer breathing problems. The employee was hospitalized.",1
"An employee was operating material handling equipment and caught her left hand between the equipment and an electrical outlet on a beam. The employee's left index and middle fingers were lacerated, resulting in partial amputations to both fingers.",0
"At about 10:00 a.m. on July 6, 2021, an employee was doing electrical powerline work when he developed heat stress symptoms. He was hospitalized.",1
An temporary employee was collecting a small bundle of yard waste from the curb and loading it into the rear hopper area of a sanitation truck. The packer panel was activated and the employee's left hand was caught by the panel and crushed.,1
An employee was cleaning the filter on a floor cleaning machine on a dock and fell off the edge of the dock to the ground below. The employee's ankle was broken in three places and required surgery.,1
"On July 7, 2021, an employee was using a wooden platform that was about 10 to 12 feet high to install the overhead can lights on a new two-story home. The wooden platform gave way causing the employee to fall on his feet. He was hospitalized for a broken right ankle.",1
"The injured employee was in a 7- to 8-foot deep trench installing a large, 66"" diameter reinforced concrete pipe. An excavator bucket came loose and fell into the trench, striking the employee on the left side of their body. The employee sustained a large contusion on the upper left leg, a broken left arm, and their left hand was surgically amputated.",1
"An employee was operating a stand-up loader and was parallel parking the loader between a parked truck and a chipper tongue. As he was positioning the loader, his left leg was caught between the loader and the parked truck and was fractured.",1
An employee was unjamming a machine and partially amputated their right index finger.,0
"An employee was shifting a drawer with a cart when the cart hit a bump and his left ring finger was crushed, resulting in a fingertip amputation.",0
"An employee slipped on water and fell to the ground, suffering a back injury.",1
An employee was working on the trim folder machine. The employee's left hand slipped and was caught in the machine resulting in fractures to the index and middle fingers.,1
"Two employees were unclogging the chipper after a rainstorm. One employee opened an access panel to the drum of the chipper to unclog it while the second employee went to the other side of the chipper. The first employee then shut the access panel. The motor was off, but the drum was still spinning. A piece of clogged brush kicked the panel open and struck the second employee in the forehead, resulting in multiple skull fractures.",1
"An employee was performing patient care activities in the patient's home when the employee tripped and fell while entering a ""sunken"" living room, fracturing their hip.",1
An employee was cleaning a machine and partially amputated their right middle finger.,0
"An employee was shutting the rear door of a store when her left middle finger was caught in the door, resulting in a partial fingertip amputation.",0
"An employee was preparing to clean a ribbon blender. The blender's lid came down on the employee's left ring finger, amputating the fingertip.",0
An employee was adjusting a loader when 15 boards dropped onto his head. He suffered facial fractures.,1
"An employee was sitting on a desk. When she stood up, she fell to the floor and broke her right ankle.",1
"While walking down a jet bridge, an employee slipped on the wet surface, fell, and sustained a broken right arm.",1
A temporary employee was attempting to remove a piece of metal from a jammed machine when the rotor lacerated his left middle finger resulting in a partial fingertip amputation.,0
"On July 7, 2021, an employee was removing a repair trailer from a utility vehicle's hitch using their right hand. As the hitch released, it pinched their right index finger between the tailgate of the utility vehicle and the trailer hitch latch resulting in a laceration and fracture to the right index finger that required surgery and hospitalization.",1
An employee collapsed at the end of the work day due to dehydration and heat-related illness.,1
An employee experienced heat-related illness at the end of their shift due to dehydration and was hospitalized.,1
"An employee was driving around and making deliveries on July 7, 2021. It was a humid, 92-degree day and the delivery truck's air conditioning failed. On returning to the facility at 5:00 p.m., the employee was hot and sweaty, with incoherent speech. The employee was hospitalized, suffering from heat exhaustion and kidney failure.",1
"On July 7, 2021, an employee was operating a standup forklift. When they lifted their left foot to apply the brake, their foot extended outside the operator compartment and was caught between the forklift and a concrete curb, resulting in a fractured left ankle and lacerated shin.",1
"On July 7, 2021, a painter was attempting to remove residual material while using a portable pneumatic powered abrasive wheel. The organic rubber wheel broke apart and debris struck the employee's eye. The employee was hospitalized.",1
An employee was participating in the running portion of a physical examination when they collapsed due to heat exhaustion.,1
"An employee was walking from their personal vehicle to the work location. While going down a grassy hill, the employee slipped on pine needles and sustained a fractured ankle.",1
"On July 7, 2021, an employee was lifting their left leg up to climb onto the upper scaffold deck for scaffold modification. After stepping up approximately 2 feet to the upper scaffold deck, the employee felt a pain in their abdomen. The employee suffered an inguinal hernia that required hospitalization.",1
"An employee was working at her desk and fell resulting in a fractured arm, wrist, and hip.",1
"Two employees were changing a guy wire, trying to remove the pin using a hammer and bull pin. When the pin came free, it crushed one employee's hand in the guy wire eyelet.",1
An employee who had been delivering packages began experiencing cramping in their arms and legs and was hospitalized for dehydration.,1
"An employee was carrying a large tray in a kitchen. The employee tripped over a plastic drink carton that was sticking out into the walkway, fell, and landed on the concrete floor, suffering a broken right hip.",1
"An employee was filling a repaired tire with air. The tire exploded and the employee sustained a fractured skull, a broken pelvis, a broken rib, a punctured lung, and a forehead laceration.",1
An employee was acting as the team mascot and was hospitalized for a heat-related illness.,1
"An employee was performing maintenance work on a piece of equipment when their left hand contacted an auger, resulting in an index finger amputation.",0
An employee was backing up a dump trailer when it tipped over. The employee suffered broken ribs.,1
"An employee was using a pressure washer when the fitting came off, causing the water to be injected under his skin.",1
"An employee was performing maintenance and mechanical work at the concrete plant. A generator stopped working because it was overheated. The employee cooled the generator engine using a hose. The employee then lifted the radiator cap lever to release steam. After the steam was released, he opened the cap and pressurized hot water was released causing third degree burns to their wrist and second degree burns to their arm and chest.",1
"An employee was in a manlift mounted on a forklift. When the manlift was raised, the employee's right hand was pinched between the lift bucket and a ceiling joist. The employee suffered a broken knuckle.",1
An employee was conducting a home visit and suffered an insect bite on her leg. She was hospitalized.,1
The injured employee was observing another employee raking out an electrical breakroom when an arc flash occurred that caused second degree burns on both arms and minor burns on the employee's face.,1
"An employee was on the furnace gantry arm replacing a 1/2"" water line. The employee sustained blisters and swelling in his throat due to lime dust exposure.",1
An employee was sharpening a long bolt with a grinding machine. The bolt slipped and the employee sustained lacerations to their ring and pinky finger as well as an open fracture and a nail bed injury.,1
"On July 8, 2021, at approximately 3:20 AM, as an employee was stepping out of a control room located on the phosphate mine, he slipped on a surface that was wet due to rain, fell and fractured his left femur.",1
"At approximately 3:38 PM, an employee got off his forklift and used a package knife to cut an air bag that was between loads. The load then shifted and a pallet of cable (800 lbs.) fell, pinning him against the side of the trailer and forcing him to the floor. The employee sustained a fracture to his back.",1
"On July 8, 2021, an employee was on an extension ladder under the silo attempting to tighten a pin located on the inside of the silo. The employee was accessing the pin through a pocket door. The employee was startled and jumped off the ladder landing on a stabilizer bar below. The employee sustained broken ribs.",1
The injured employee had spilled some gas on his pant leg while handing a chop saw to a co-worker. The co-worker began to cut a piece of steel and a spark from the chop saw ignited the employee's pant leg. The employee was hospitalized for burns to the leg.,1
An employee was cleaning dough from the sheeter when their right hand was caught between the rollers. Their hand and fingers were crushed.,1
An employee was delivering parts in a customer's store when he tripped over a chair and fell to the floor sustaining a fractured hip.,1
An employee had been moving furniture and passed out in the company parking lot from dehydration and heat-related illness.,1
"An employee on a fixed ladder platform tried to remove the top tote from a stack when they fell from the ladder to the ground, resulting in a broken ankle.",1
An employee experienced a back strain while lifting a 25-pound box and placing it down.,1
"While performing maintenance on a conveyor belt, an employee's hand was caught in a pinch point when the machine cycled. The employee suffered an amputation injury.",1
"The injured employee was directing the excavator operator in the lifting of the boring rig from the boring pit. During the lift, the chains needed to be adjusted. As the employee adjusted the chains the boring rig slipped off its tracks and pinned him against the shoring box. The employee suffered a pelvic fracture and was hospitalized.",1
An employee was climbing a ladder and fell two feet onto a metal walkway below. The employee sustained a fractured right femur and a fractured right arm.,1
"A mechanic was using a prybar to remove a pin from the arm of an excavator that was being offloaded. The prybar slipped, striking the employee in the face. The employee sustained a severe laceration to the face and was hospitalized for surgery. The employee also lost the use of his right eye.",1
An employee was attaching a dolly to the back of a trailer. His left hand was caught and crushed between the dolly and the trailer. He was hospitalized.,1
"An employee was unloading resin from a railcar. As the employee was pushing the lever to open the outside storage container at the bottom of the rail car, his left pinky finger was amputated.",1
"On July 7, 2021, at approximately 5:30 p.m., an employee was parking a front-end loader after moving hot coils from production to shipping in a steel mill. While exiting the front-end loader, the rear wheel on the left side of the loader exploded, throwing the employee approximately 20 feet from the boarding platform. The employee was hospitalized with broken bones in both ankles.",1
An employee became dehydrated while finishing concrete. The employee felt weak and dizzy and became ill. The employee was hospitalized.,1
An employee was setting up the short path wiped film distillation machine and suffered a hand injury that resulted in an amputation to their left index finger.,1
An employee was standing on an 8-foot ladder drilling through block inside a house in order to run duct work. The employee fell to the ground and fractured their wrist.,1
An employee was pumping gas into a customer's car. The customer started to drive away and the employee was dragged a few feet resulting in a hip fracture.,1
An employee was installing pipes and ducts in an attic space. His elbow struck a metal frame and was injured.,1
"An employee was descending a 6-foot ladder and missed the last step, causing the employee to fall to the ground and fracture his hip.",1
"An employee was walking down from a platform. He missed a step and fell, breaking his left foot. He was hospitalized.",1
An employee was walking though the warehouse and was struck by a forklift resulting in an open fracture of the right ankle. She was hospitalized.,1
"An employee was performing work on a machine when the machine's cover fell onto his leg, resulting in a broken leg.",1
An employee was unloading a truck when a wood beam fell off the truck onto the employee's left leg and fractured it.,1
"An employee was working on a stand-alone rig. The employee had just broken off the tubing swivel with the tongs and was preparing to make the last connection. He placed his left hand near the opening of the tongs to push the tongs off the connection, but the Kelly hose was caught on the back of the tongs. The employee used his right hand to push the Kelly hose out of the way. The hose caught the operating handle and engaged the tongs causing the amputation of his left index and middle fingers and an oblique fracture of his left thumb.",0
An employee was standing on top of a 9-foot concrete structure and fell to the ground below. The employee sustained a fractured leg.,1
An employee's right-hand glove was pinned by the vise clamp of a saw. The employee suffered an amputation to the right index finger.,0
An employee was using a machine to cut grating to size when the clamp on the machine amputated their thumb.,0
An employee was using a paper cutter and amputated the tip of their left thumb.,1
"An employee was loading a flatbed trailer with material. The employee slipped and fell from the flatbed to the ground, suffering broken ribs and a forehead laceration.",1
"An employee was operating the pulverizing machine in the Plastic Department. The employee used a computer to set up and adjust the temperature of the machine and was monitoring the machine for jams. As the employee was removing a jam, his left index and middle fingertips were amputated.",0
"The employee was rigging a towing strap to a front-end loader to tow a truck out of the mud and onto matting. The front-end loader moved while the employee's thumb was between the vertical drop pin and the tow bar of the front-end loader, resulting in a partial thumb tip amputation.",0
An employee was setting up a machine when their foot got caught in a cord which caused the employee to fall to the ground and fracture their left hip.,1
"On 7/9/2021, at approximately 2:15 p.m., an employee was attempting to leave their desk and got caught on the corner of the desk, causing a trip and fall. The employee fractured their left hip and was hospitalized for surgery.",1
An employee fell off a roof.,1
An employee was standing on steel floor plates. The floor plates shifted under the weight of a forklift as it backed over them. The employee lost balance; his left foot slid down and became trapped between floor plates with the weight of the forklift pushing on the plates. The employee sustained the amputation of two toes.,0
An employee was operating a front-end loader. The employee fell off the loader and fractured their tibia and fibula.,1
An employee was delivering mail and felt dizzy from inhaling the exhaust fumes from the delivery truck.,1
An employee was cleaning equipment when the star valve on the equipment amputated four fingers on the employee's left hand. The equipment was running at the time.,0
"An employee was on a ladder that was leaning against a flag pole. As the employee was changing the rope on the flag pole, the pole shifted and the employee fell to the concrete below, resulting in a broken ankle, a fractured wrist, a knee injury, and a lower back injury.",1
An employee was flipping an I-beam when it landed on his left little finger and ring finger. The little fingertip was amputated.,1
An employee was operating a plate machine. There was tape inside the machine and the employee tried to pull it out. The employee's finger was caught in the machine resulting in a fingertip amputation.,1
"On July 9, 2021, employees were operating a mobile conveyor belt to load sand into a silo. The conveyor was experiencing belt issues and was being replaced with a new conveyor. The injured employee was operating the conveyor to fold it up so that it could be transported when the conveyor struck an overhead electrical line. The resulting arc flash burned the employee's left hand fingers.",1
"The injured employee was descending a fixed ladder in the base cone of a spheroidal design water tower. Another employee above him was lowering a plastic, 5-gallon bucket full of tools with a rope. The handle on the bucket broke and the bucket and its contents fell on the injured employee causing him to let go of the ladder and fall approximately 10-12 feet to the lower level. The injured employee sustained fractured vertebrae, a concussion, and lacerations to the face and head.",1
"An employee was changing an airbag on a truck. He slipped and fell, suffering a dislocated elbow and a wound on his arm. He was hospitalized.",1
An employee was removing a pin from a portable track press. The pin struck the employee on the head causing a laceration.,1
"An employee was grinding on a steel vertical stiffener when the grinder kicked back and contacted the employee's left index finger, resulting in a laceration that required surgery.",1
"An employee was checking a flour return valve that was reported as out of position. The employee connected and disconnected the pneumatic air hose to the piston. The piston's reciprocating movement restarted and it struck the tip of the employee's right index finger, causing an amputation.",0
The employee was using a walk-behind saw to cut concrete. The saw produced a slurry and the employee slipped in the slurry and fell into a pit. The employee sustained head lacerations and bruised ribs.,1
"An employee was installing insulation when they fell to the basement floor below, resulting in broken ribs.",1
An employee was in a scissor lift painting a ceiling. A wheel on the lift went into a depression on the concrete floor causing it to fall over. The employee suffered head and back injuries.,1
An employee tripped over a trash bag tied to her product-stocking cart. She fell and suffered a broken hip. She was hospitalized.,1
"An employee was removing the bag from a lawn mower. When the employee attempted to clear some grass from the opening, the lawn mower blades made contact with three of the employee's fingers, resulting in amputations.",1
An employee was setting utility poles. A pole slipped and struck the employee's hard hat causing head and chest trauma.,1
An employee was driving a rear-property machine across a bridge over a river when the bridge collapsed and the machine and the employee fell 16 feet into the river below. The employee suffered a broken ankle and broken ribs.,1
An employee's thumb was pinched and lacerated while making adjustments to the shutter on a press machine.,1
An employee was delivering uniforms to a business when she slipped on a set of stairs and fell to the ground. She suffered a hematoma to the buttocks.,1
"An employee was walking out of a patient's home and rolled her ankle, resulting in a fractured foot.",1
"On July 9, 2021, a bar joist fell off the truck trailer and struck an employee working on the ground. The employee sustained a broken collarbone and two broken ribs.",1
An employee was closing a trailer door and fell off the back of the trailer onto the ground. The employee sustained a head laceration.,1
"A smokejumper jumped out of a plane to fight the fire and got caught in a tree. The parachute let go and he fell to the ground. The employee sustained a pelvic injury, a broken tibia and a concussion.",1
An employee was loading a band saw when their left pinky finger was caught in the pneumatic clamp resulting in a fingertip amputation.,0
An employee was emptying trash into a garbage truck. The sweeper blade grabbed his work glove and lacerated his ring finger.,1
An employee was delivering mail to a home. A dog attacked the employee causing the employee to fall and the dog latched onto the employee's hand. The employee sustained a hand injury and was hospitalized.,1
Two employees fought in a parking lot. One of them suffered eye injuries and broken bones.,1
"On July 9, 2021, at approximately 11:15 a.m., an employee was aligning a belt on the press conveyor and attempted to remove a piece of rubber underneath the conveyor when their right middle finger was caught between the cylinder and the conveyor, resulting in amputation at the proximal phalanx. The conveyor was running at the time.",0
"The injured employee was felling a tree. After the tree was down on the ground, the trunk shifted onto the employee's lower left leg knocking him down. The resulting impact caused fractures of the lower bones and ankle.",1
An employee was working outside assembling equipment in heat and humidity. The employee sustained heat-Illness/dehydration.,1
"On July 9, 2021, an employee was staging a train of empty rolling carts when he lost his balance and fell to the concrete floor, resulting in a fractured right elbow.",1
An employee had been packing product and sustained heat stroke and dehydration.,1
"An employee was operating a stand-up forklift. The forklift battery began to slide out of the battery compartment. As another forklift tried to lift the battery using a hoist attachment, the battery fell out onto the employee's left foot. Toes on the foot were amputated.",0
"An employee raised a pallet with his forklift in order to record information written on the pallet. While he was recording the information, the pallet slipped off the forklift's tines and crushed his finger. The finger was amputated.",0
"An employee was working on an electrical power panel. Wires slipped out of the employee's hands and the device he was using to hold the wires, resulting in an arc flash. He suffered electrical burns to the hands, forearms, and neck and was hospitalized.",1
An employee was walking out of an elevator and twisted her ankle. The employee fell and broke her right ankle.,1
"An employee was climbing a fixed ladder to access a raised mezzanine, slipped, and fell 8-12 feet to the concrete floor. The employee suffered a fractured leg.",1
"An employee was spotting for a forklift that was transporting compressor cylinders. The cylinders slid off the forklift's forks, struck the employee, and pinned him against another cylinder on the floor. He suffered lacerations to the abdomen and face and was hospitalized.",1
"An employee was observing forklift operations in the warehouse and was struck by a forklift, resulting in broken bones in their right foot.",1
An employee was cleaning a glue machine and amputated their left index finger.,1
An employee was clearing a jam using a push broom and fell approximately 11 ft. from an open door in the floor. The employee was hospitalized for a broken rib and a broken facial bone.,1
"At about 8:00 a.m. on July 10, 2021, an employee was putting product into a brake press. The machine was engaged while his right hand was in the point of operation resulting in finger fractures. He was hospitalized, undergoing surgery.",1
An employee slipped and fell and hit their head on the floor.,1
An employee was operating a 9-head cutting machine and suffered a severe laceration to the right hand.,1
An employee was directing the track loader as it backed up. A half-inch double-braided polyester rope that being used to remove tree trunks broke and struck the employee resulting in a traumatic head injury and the loss of their left eye.,1
An employee was attempting to free a hydraulic line. When the coil tubing was freed it struck the employee in the head causing a skull fracture and a laceration that required stitches.,1
"A forklift struck an employee, causing a broken left leg that required hospitalization and surgery.",1
An employee was trying to clear a jam in a pellet mill. A portion of the mill was still cycling and the rollers caught the employee's right hand. The index finger was medically amputated.,0
An employee was driving an all terrain vehicle (ATV) to the driving range when he hit a patch of gravel that caused the ATV to overturn on top of him. The employee was hospitalized for a fractured left ankle as well as lacerations and abrasions to his leg and forearm.,1
"An employee tripped and fell while walking toward a building exit. The employee's knees and head struck the floor, causing a cracked left kneecap and a head contusion.",1
"An employee was walking in an operating room when they slipped on liquid and fell to the floor, resulting in a fractured right patella.",1
An employee was using a forklift to load a pallet and was backing away from the pallet when the forklift collided with another forklift. The employee suffered a leg injury.,1
"An employee was using a handheld circular saw to cut a wooden stake when the blade contacted his left hand, resulting in the amputation a finger.",0
Two employees were loading concrete barriers into the bed of a dump truck using an excavator. The injured employee was in the bed of the dump truck when one of the barriers shifted and fell onto his left foot. His left foot was then caught between two barriers and sustained tendon damage.,1
An employee was unloading concrete from a ready-mix truck. The employee was leaning on the truck's fender and had a remote control for the truck in his hand. The pumper that he was feeding into made contact with an overhead power line; the employee suffered a whole-body shock.,1
An employee was cutting a panel on the sliding saw and cut their right middle and ring fingers.,1
"An employee was touring the store, missed a step, and fell to the ground. The employee sustained a hematoma.",1
"An employee was removing a popsicle stick from a frozen treat machine when their glove was caught in the machine, resulting in a fingertip amputation on the right hand.",1
An employee fell to the floor while walking and suffered an open fracture to the right wrist.,1
An employee was unloading packages from a container. Their foot was caught between the container and the bay door floor and the employee fell more than 4 feet. The employee sustained a fractured leg and ankle.,1
"An employee was shrink wrapping a pallet for transport at the loading dock. When the employee stood up from a kneeling position, they felt a ""pop"" and experienced pain in their hip.",1
"On 7/12/2021, at approximately 8:00 AM, an employee was walking in the plant, tripped on a corner of a pallet, and fell. The employee was hospitalized for a fractured left hip that required surgery.",1
"An employee was loading a machine with product. The employee's right middle finger was caught in a nip area on a pulley, causing the amputation of the fingertip.",0
"An employee was preparing to mix floor stripping product. The undiluted product spilled, then seeped into the employee's shoes. The employee suffered second- and third-degree chemical burns to the feet.",1
"At about 9:35 a.m. on July 12, 2021, an employee was using a rebar bender. The machine actuated while the employee was holding a bar with two hands; its pin rotated, and the employee's fingers were caught between the pin and the rebar. The employee suffered fractures of fingers on the left hand and was hospitalized.",1
An employee was using a tool to clear a jam in the rotary cutter machine when the door on the machine closed on his left thumb resulting in a loss of flesh on the front of the thumb without bone loss.,0
An employee was welding a mild steel deflector onto a rail car dumper. The employee unhooked their lanyard to reach a welding rod and received an electrical shock. The employee fell 20 feet to the steel floor and was hospitalized for a fractured wrist and pelvis.,1
"An employee was cleaning meat off a conveyor belt when his glove was caught under the belt, causing his finger to be pulled into the sprocket and resulting in a partial amputation.",0
An employee was taking measurements on a rooftop and fell 9 feet to the ground. The employee sustained multiple broken bones.,1
"An employee was carrying dirty laundry to a laundry room when the lid to the clothes basket came off and fell to the tiled floor. The employee slipped on the lid, fell forward, and suffered a broken lower tibia and contusions to the head and knees.",1
An employee sustained injuries from a fire that occurred at a wellhead.,1
An employee was changing a fan pulley when the fan blade injured their right index finger resulting in an amputation to the finger.,0
A crane inspector was inside the cab of a crane when the floor of the cab gave way and the employee fell 25 feet to the ground below. The employee sustained multiple broken bones.,1
An employee was guiding a customer's car to the conveyor system that guides the vehicle through the car wash. The car missed the conveyor and struck the employee who sustained a fractured hip.,1
An employee was operating a crank lift. The wheel of the dolly rolled over the employee's toe. The toe became infected and the employee was hospitalized for treatment.,1
An employee was assisting another truck driver with hooking his set of twin trailers. The employee was between trailers and was struck by the converter dolly. The employee sustained a fractured left foot/ankle requiring surgery.,1
"An employee was riding a forklift and fell off. The forklift ran over both of their legs, resulting in crushing injuries.",1
An employee was changing the battery on a forklift using a mobile battery dolly. The employee positioned the dolly adjacent to the storage rack. The dolly began to roll backward when the employee was transferring the battery and the battery fell off the rack and onto the employee's left foot. Three toes were severely crushed resulting in amputation at the first knuckle.,0
An employee was working with steel frames. He was cutting wires when the frames fell on him resulting in a fractured right femur and a fractured left leg. The employee was hospitalized for surgery.,1
"An employee was walking outside when their ankle turned, causing them to fall to the ground and sustain a broken left hip.",1
An employee was helping a customer at the self check out register and as she was walking away she tripped over the corner of the register and fell onto her right side. The employee sustained a fractured right hip and a right elbow laceration.,1
"An employee slipped or tripped and fell on the floor, resulting in a fractured left hip.",1
"An employee was standing on a 14-inch, 60-foot-long, 73-pound-per-foot H-pile lying on dunnage. A rough-terrain forklift was being used to move a 6-inch, 12-foot-long channel on its forks. The end of the channel clipped the end of the H-pile, causing it to roll off the dunnage and strike the employee's lower leg. The employee suffered fractures to the lower leg and ankle, with no open wounds.",1
"On 7/13/2021, at approximately 4:55 PM, an employee was lifting a drain grate to remove a glove from the drain when the grate slipped and fell on his left hand causing the amputation of the left middle finger at the first joint behind the fingernail.",0
"An employee was greasing a bearing with a grease gun when grease punctured the skin on his left middle finger, requiring surgery.",1
"An employee was shoveling coal inside the conveyor room, got dizzy, and collapsed. The employee was hospitalized for heat stress.",1
Two employees were moving 60 lbs. boxes of beef in the freezer. One box fell on the injured employee's hand and amputated his thumb.,0
An employee was performing maintenance on a stretcher lever machine and received an electric shock (480 volts).,1
An employee was preparing to load a pallet on the dock and was checking the label on the pallet. The employee stepped on the edge of the skid and got caught on a piece of plastic wrap or tape and fell to the concrete floor. The employee sustained injuries to the right hip and leg.,1
"An employee was conducting maintenance on a rotary microtome when the tip of their right little finger contacted the microtome blade, resulting in an amputation.",1
"On July 13, 2021, an employee was on a ladder in the foyer changing a light bulb. The employee fell from the ladder and was hospitalized.",1
"A tractor trailer driver climbed into the driver's seat of their truck, set down their lunch box and hat, and started to get back out of the truck to get some gloves. The employee fell to the ground and suffered a compound fracture to the wrist that required surgery.",1
"An employee was walking in the kitchen, slipped on the wet floor, fell, and fractured their hip.",1
"During the process of nipping down the well head, a flash fire occurred and an employee was burned on the face and neck.",1
"An employee was on scaffolding and was using a broom to push an air duct out of the way for a clear view of a pallet on pallet racking. While pushing the air duct, the broom gave way and bent in half, causing the employee to lose balance and fall forward. The employee fell from the scaffold, roughly 5 feet, to the floor and sustained 8 broken ribs, a broken scapula, and a laceration that required staples. The employee was hospitalized.",1
"On 7/13/2021, around 9:00 a.m., an employee was servicing a hydraulic motor when the table that it was welded to fell 2-3 feet from a crane and struck the employee's right leg, fracturing it.",1
"An employee was moving a machine apparatus that weighed approximately 3,000 lbs. with a forklift. As the apparatus was lifted, it shifted and amputated the employee's left middle finger to the first knuckle.",0
"An employee was climbing down a step ladder when she fell to the floor below, resulting in an injured knee.",1
"An employee attempted to get a part out of a machine when their arm got caught in the machine, resulting in a crushing injury including a partially severed muscle and an injured tendon that required hospitalization.",1
"On 7/13/2021, an employee was carrying a conveyor roller while walking backward on a catwalk. The employee missed a step while going down the stairs, causing the employee to fall backward. The roller came down onto the employee's fifth digit on the right hand crushing it against the catwalk decking and fracturing it.",1
"An employee was taking a U-joint out of a dry shaft using an air hammer when fractured metal hit his left wrist, resulting in an injury.",1
An employee was erecting a scaffold and fell 24 feet through an opening in the scaffold. The employee sustained broken bones on the left arm and wrist and a hip injury.,1
"On July 13, 2021, a concrete delivery driver was attaching the second chute to the mixer truck when the tip of his right index finger was pinched and amputated between the chute and the truck.",0
"The injured employee was putting on skylight covers and fell 24 feet to the ground. The employee sustained a broken arm, leg, and pelvis. Fall protection was not connected at the time.",1
"On July 13, 2021, an employee was drilling a hole for piping in a concrete wall using a core drill. The employee's gloves caught the shaft of the core drill causing a partial amputation to the left index finger and lacerations to the left middle and ring fingers.",1
"An employee went to sit on a folding chair when his left ring finger got caught on the folding portion of the chair, resulting in a distal amputation.",1
"On July 13, 2021, an employee was moving two 90 lbs. parts and pinched his left middle finger between the two parts resulting in a fingertip amputation.",0
"An employee was stepping over a 30"" concrete parapet wall and lost balance. The employee fell back and to the side, striking their arm against a metal wall track that was mounted on the top section of the wall. The employee's left forearm was lacerated.",1
"An employee was attempting to raise an oscillating motor when their left index, ring and little fingers became caught in the belt that rotated around the drive, resulting in an amputation of their left ring finger, including soft tissue loss.",1
An employee was repairing a broken torsion rod on a liftgate when the rod released and struck the employee's face. The employee sustained facial fractures and a broken nose and was hospitalized.,1
An employee was changing a bearing on a fly cutter and his left hand was caught in the point of operation when the machine cycled. The employee suffered a laceration from the dorsal side of his left forearm proximal to distal terminating at his metacarpal.,1
An employee was cutting laminated flooring with a portable table saw and amputated the tip of his left thumb.,0
An employee was using a cut-off saw to cut rebar when sparks from the saw caught the employee's clothes on fire. The employee sustained burns to the left side of his body.,1
An employee was troubleshooting a machine when the machine activated and pulled in their left hand. The employee sustained broken bones in their hand as well as a severe laceration that required stitches.,1
An employee was attempting to cut a groove in an 8-inch diameter HVAC pipe using a roll grooving tool when his hand slipped and the tip of his right index finger was crushed in the point of operation.,1
"After moving machinery from a tractor trailer using a crane, employees were disassembling and stowing the crane. A steel spreader bar, used as rigging, was placed on the ground while the employees were stowing the crane. The spreader bar tipped over on uneven ground and struck an employee in the heel and fractured it.",1
An employee was testing an electrical transformer and sustained an electric shock and burns.,1
"On July 14, 2021, at 3:15 p.m., an employee was loading a forklift onto a flatbed trailer. As he stepped off the forklift and onto the flatbed, he fell onto the asphalt and broke his femur.",1
"An employee was assisting with installation of a pipe cutting machine. During the installation, the machine slipped off the pipe. The employee attempted to grab it and their right little finger was pinched between the machine and the ground, resulting in a partial amputation of the fingertip.",0
"An employee was walking down stairs when they tripped and fell, resulting in a broken ankle.",1
"An employee was operating a machine when his right hand contacted the belt/pulley assembly, resulting in the amputation of the distal 1/4 inch of his right ring finger.",1
"On 7/14/2021, an employee dismounted a sit-down forklift and his right foot was then run over by the forklift, resulting in a right foot amputation.",1
"An employee was preparing to straighten a photo proximity eye in a machine when their left index finger was pinched between a moving belt and a fixed component of the machine, resulting in a fingertip amputation. The machine was unguarded at the time of the incident.",0
An employee was conducting casting operations near the furnace and became ill. The employee was hospitalized for heat exhaustion.,1
An employee was hanging overhead water lines while inside a forklift box attachment approximately 14 feet off the ground. The box attachment fell to the ground and the employee suffered broken ribs.,1
An employee was getting ready to enter the facility's external chlorine shed to clean up a broken light bulb when they began to experience shortness of breath due to chlorine exposure. The employee was hospitalized.,1
"An employee was setting up their work station for the day, slipped and hit their head on a nearby conveyor. The employee was hospitalized for an eye contusion and later lost their right eye.",1
An employee was hospitalized after being assaulted by another employee.,1
The injured employee was operating a forklift while another employee was backing a forklift out of a trailer. The backing forklift struck the injured employee's forklift. The injured employee's left foot was caught between the two forklifts and injured.,1
An employee was standing on a 10-inch step stool performing maintenance on a pickup truck engine when they fell off the step stool and landed on a wheeled tool chair. The employee suffered six fractured ribs and a collapsed lung.,1
"An employee was hopping down off a concrete platform outside the building and fell 2 feet to the ground, resulting in broken bones. The employee was hospitalized.",1
An employee was cutting wood on a table saw and amputated part of their thumb.,0
"An employee was exiting a letter carrier vehicle when he tripped on the seat belt, causing him to fall and hit his head on the pavement. The employee suffered head swelling that required hospitalization.",1
"An employee working at a loading dock entered the back of a truck. The truck pulled away causing the employee to fall out of the truck. The employee sustained a concussion, left forehead hematoma, broken left shoulder, and broken left heal.",1
"An employee was on a portable ladder, installing a metal awning over a doorway. The employee fell from the ladder to the concrete ground, suffering a broken wrist.",1
Employees were pouring a culvert using a trackhoe. The injured employee was dumping a concrete bucket when the hydraulic line on the trackhoe failed causing the stick portion of the boom to release. The bucket struck the injured employee and he fell into a rocky bank and struck his head.,1
"An employee was taking down a partition wall. The wall fell on the employee, injuring the employee's left knee.",1
"An employee was feeding a chipper machine when a board slab shifted, hitting him and knocking him to the floor. He suffered contusions to the right shoulder and hip.",1
"Employees were creating a joint in casing. When the employees reversed out the tongs, the tension in the casing pushed the tongs toward the injured employee. The injured employee's finger was pinched between the casing safety door and the tongs and their fingertip was amputated.",0
"An employee was performing maintenance activities on a drive train when they were caught between a tensioner and a beam, resulting in fractured ribs and a fractured sternum.",1
An employee was riding on the tailgate of an off-road utility vehicle. The employee fell to the pavement and sustained a fractured skull.,1
"An employee went to sit on a stool when the stool rolled out from under her, causing her to fall to the floor and resulting in a broken neck vertebra.",1
"An employee was pumping a load of chocolate off a tanker. The dairy valve sucked in, injuring his right index and middle fingers and causing an amputation to a fingertip.",0
An employee was cutting a 15-inch concrete pipe with a 20-inch radial hand saw. The saw kicked back and deeply lacerated the employee's chest. The employee was hospitalized.,1
An employee was cutting a circular pattern in cloth using an electric rotary cutter. The cloth got caught in the cutting tool's blade and the employee's hand was pulled into the tool. The employee's left index fingertip was amputated.,0
An employee developed heat exhaustion while working in a blast container.,1
An employee was off loading ammonia solution at the plant when the connection at the pump truck came off and approximately 500 gallons of ammonia were spilled. The employee suffered chemical burns to the legs and feet due to the ammonia exposure.,1
"An employee was delivering products to a store when they fell from the side of the trailer attached to the delivery truck, resulting in head injuries.",1
"An employee was installing a splitter on a TV cable while on an A-frame ladder when he fell, resulting in a head injury that required hospitalization.",1
"An employee had been excavating and setting shoring for the excavation. He lost consciousness and was hospitalized, suffering from heat exhaustion.",1
"An employee stepped on a nail in a parking lot. The wound became infected, resulting in an amputation.",1
"An employee was manually lifting corrugated sheets off the production floor when she was struck by a moving T-car unit, resulting in a cut to the lower left leg above the ankle bone.",1
"An employee was performing cleanup tasks on a casting machine when the machine started up, resulting in an amputation of his left pinky finger and part of his ring fingertip.",1
"An employee was removing his tools from the basket of his bucket truck. When he turned to step down, he fell to the pavement and landed on his hip, resulting in a broken hip that required hospitalization.",1
An employee was starting a pit scraper machine. The employee's right middle finger was caught in the machine's belt and pulley system. The fingertip was medically amputated.,0
"An employee was sandblasting the external hull of a battleship. The blasting hose lost pressure because the blasting hose was under the tire of an aerial lift. The employee lowered the lift and tried to free the hose when it ruptured, causing a laceration to the employee's right arm.",1
"An employee was in the basket of an aerial lift when blast grit from a co-worker's hose struck the employee's right upper arm, resulting in a severe laceration.",1
"On 7/15/2021 at 9:00 a.m., an employee was traveling down a warehouse aisle on an electric pallet jack when a forklift struck the pallet jack at an aisle intersection. The employee was pinned to the pallet jack by the palletized materials on the forklift, resulting in leg fractures that required surgery.",1
An employee was leaning against a steel beam when the steel beam and the employee both fell approximately 5 feet to the ground. The employee suffered a fractured wrist.,1
An employee was driving a motorized pallet jack. The employee leapt from the pallet jack and his ankle was crushed and fractured between it and a shelf.,1
An employee attempted to remove a waste pan from a rack in the blanching area when the pan tipped and caught her finger between the pan and the rack. The employee's left middle fingertip was amputated.,0
"The injured employee was changing a coil on a coil threader. As the employee walked toward the machine, his right leg contacted a compressed air line that was mounted to the side of the machine, causing him to fall toward drive rollers on the flex line coil threader. As he fell, his right hand entered the machine's point of operation. The employee suffered injuries that required the surgical amputation of the right index finger and ring finger, and a partial amputation of the right middle finger.",1
"An employee was preparing to clean a chemical tanker when a pressure release occurred, spraying the employee with acrylic acid and resulting in chemical burns to their legs and abdomen.",1
"An employee was on a ladder pulling cable through ceiling tile. The employee was descending the ladder, missed a rung, and fell to the ground. The employee suffered a back injury.",1
"An employee was installing a beam when he fell about 15 feet along with the beam he was hooked up to, resulting in multiple broken bones and lacerations.",1
"On July 15, 2021, an employee was operating a press when fingers on their left hand were amputated.",0
"An employee was monitoring an automated onion bagging machine. The employee noticed a piece of scrap wood stuck in the staple machine. After he removed it, the machine cycled and a staple went through his left middle fingertip. He was hospitalized, requiring surgery.",1
"An employee slipped on water on the floor and hit her back, resulting in a back injury that required hospitalization.",1
"An employee was unloading freight using an electric pallet jack. While backing up the pallet jack collided with a rack. The employee's arm and wrist were caught between the pallet jack handle and the metal rack, resulting in injuries.",1
"On July 15, 2021, at 12:55 p.m., an employee stepped off a raised selection area onto a pallet in order to reach product when the pallet shifted, causing the employee to fall approximately 6.5 feet onto a pallet of product. The employee was hospitalized with a fractured right arm.",1
"An employee was opening semi-trailer doors when a bale fell against the door of the trailer and the door hit the employee, causing him to fall to the ground and sustain a fractured vertebra.",1
An employee was climbing down from a crane after loading it onto a lowboy trailer. He fell to the ground about 4 feet below and suffered a spiral fracture to the lower right leg.,1
"On July 16, 2021, at approximately 1:50 p.m., a subcontractor employee was picking up trash when he was run over by a skid-steer loader, resulting in a broken right leg.",1
"An employee tripped over a bag that was on the floor and fell, sustaining injuries to the leg and shoulder which required hospitalization and surgery.",1
"An employee was climbing down a ladder when it shifted, pinching the employee's little finger against the overhead water pipes and steel support braces. The finger was severely lacerated, resulting in an amputation below the knuckle.",1
An employee was lifting a patient when he began to feel abdominal pain and was hospitalized. The employee suffered a hernia.,1
"An employee was putting wood under a 500-pound steel cutout that had been raised by a magnet crane. The cutout fell from the crane and hit the wood, which flew up and struck the employee in the face. The employee suffered a broken front jaw and several broken teeth.",1
"An employee had replaced a hydraulic hose on a forklift and was removing the blocks when a block kicked out. The mast and forks came down and struck him in the right forearm, cutting and fracturing the forearm.",1
An employee was working in a farm field behind a piece equipment that puts plastic in the ground. The employee began to experience heat-related symptoms at the end of their shift.,1
An employee was inspecting a malfunction in the wire tie of a baler. The tension release bar engaged and caught the employee's right index fingertip resulting in an open fracture and partial amputation.,0
"An employee was operating a compound utility loader. A truck struck him as it backed up, breaking his leg. He was hospitalized.",1
"An employee was opening a trailer door when the trailer moved and the employee fell 51 inches to the ground below, resulting in a broken femur.",1
An employee was operating a press brake when it amputated the tip of his left ring finger.,0
"An employee was in an aerial lift on a public road. A truck hit the lift basket and its ladder/ladder rack injured the employee's leg. The employee was hospitalized, undergoing surgery.",1
"On July 16, 2021, an employee was moving a 3/4-inch metal plate with a crane onto a work skid when his left ring finger got caught between the load and the skid, resulting in a pinched fingertip. The employee was hospitalized for surgery.",1
A temporary employee was parking a stand-up forklift. He got off the forklift while it was still moving and the forklift pinned his left foot against a parked forklift. The employee sustained a broken foot requiring hospitalization and surgery.,1
An employee was trying to determine what was preventing an auger bit from setting in a Kelly bar when his finger was caught in a pinch point in the Kelly bar. He suffered a fingertip amputation.,1
"On July 16, 2021, an employee tripped on a floor mat while entering the store. She fell and suffered a broken right thumb. She was hospitalized.",1
"An employee was reaching up to turn on a fan in the outdoor register hut. She fell off a bucket and landed on the floor, resulting in a back injury that required hospitalization.",1
"An employee was rolling a cart carrying used fryer oil. The handle broke and the cart fell to the ground. Hot oil got onto the employee, who suffered second-degree burns to the right ankle, left leg, and left arm.",1
"An employee was operating a hydraulic press metal stamping machine when his left-hand fingers contacted the stamping die at the point of operation, resulting in a partial amputation of the left index finger.",0
"An employee was operating a rigid cell brace punch machine when their left index finger was caught in the point of operation, resulting in a fingertip amputation. The machine was unguarded at the time of the incident.",0
"On July 16, 2021, an employee was operating a lift when his left hand was caught between the lift and a sort rail. He suffered a laceration and nerve damage to the hand and was hospitalized.",1
"An employee was shredding plastic material when their middle finger was pulled into the shredder, resulting in amputation.",0
"An employee was assisting co-workers with re-lining a steel ladle cover for a ladle that was approximately 12 feet by 14 feet. The ladle was attached to an overhead double girder bridge crane and was suspended off the floor. The ladle lid moved off the crane and landed on the employee's foot, resulting in broken bones.",1
An employee was drying off a small area of a roof that was being installed using a 1-pound butane torch when the fumes from the bonding adhesive ignited and the roof caught fire. The employee sustained second degree burns on 25 percent of his body.,1
Employees were on the roof to install a generator. The injured employee went into the attic and fell through the attic landing on a table and then falling to the floor. The employee sustained back injuries.,1
"An employee was in the pit under a molding machine. The machine cycled, and the rotating loading plate struck the employee in the head. He was then caught between the loading plate and the loading grate when the machine moved to cycle again. The employee suffered internal crushing injuries to the upper body and head.",1
"An employee was working from a ladder when it slid out from under him. He fell to the ground and suffered broken teeth and a fractures to the jaw, forearm, and thumb.",1
"On July 16, 2021, at 11:30 a.m., an employee was standing on a truck's trailer adjusting a load of steel parts that were to be hauled to a scrap yard. The load shifted and the employee jumped off the trailer to the concrete approximately 4 to 5 feet below to avoid being injured by the shifting load. The employee suffered a fractured right heel and fractured left knee that required hospitalization.",1
"An employee was waiting on a customer, turned and fell, resulting in a left hip fracture.",1
"An employee was trying to clear a blockage in a drain pipe when the pipe's pneumatic valve cycled, resulting in a partial amputation of their right index fingertip.",0
"An employee got up from their desk, tripped on the chair, and fell suffering a broken patella.",1
"An employee tripped over equipment and fell to the floor, suffering facial and leg fractures. The employee was hospitalized.",1
"An employee was detaching a 200-pound bale at or near an oil well site. He tripped on a rock and fell backward and the bale fell on his abdomen, causing internal bleeding.",1
An employee was removing slag from the walls of a receiver with a chipping hammer. The employee was caught between a hot metal carrier ladle and chisel bits and suffered a crushing injury to the torso that resulted in a lacerated liver. The employee was hospitalized.,1
"An employee was trying to pick up a roll of wire that had tipped over. The roll began to slip and caught the employee's left middle finger, causing an amputation to the fingertip.",0
"On 7/17/2021, at approximately 6:30 p.m., a temporary employee was operating a battery powered pallet jack. While walking backward, he tripped over the forks of a parked forklift. The pallet jack continued moving, rolling up onto his right leg and fracturing the ankle and foot. The employee was hospitalized.",1
An employee was operating a front-load garbage truck. The employee lowered the front forks on the truck and climbed them to clear debris. The employee then fell 8-9 feet and suffered fractured ribs and possible spinal injuries.,1
An employee was on a ladder clearing a conveyor belt. A large piece of material fell from the conveyor belt and struck the ladder causing the ladder and the employee to fall to the ground. The employee sustained fractured vertebrae.,1
An employee was working with high pressure oil and sustained a high pressure wound under his left index finger. The employee was hospitalized and had surgery.,1
An employee was performing maintenance outside when he began feeling lightheaded and disoriented. The employee later collapsed and was hospitalized for heat stress.,1
"An employee slipped/tripped and fell to the floor, breaking her right arm.",1
An employee was on a ladder replacing a fan on an inverter and was shocked. The employee fell off the ladder approximately 2-3 feet to the ground. The employee sustained an electrical burn to the right hand and a fractured spine.,1
An employee was unclogging a blower machine that breaks down poly-cotton blend fibers. A cylinder inside the machine was still spinning and pulled the employee's right hand in. The right arm was amputated up to the elbow and the employee was hospitalized.,1
An employee was disconnecting a hot water hose from a trailer. Hot water burned the employee's right thigh and leg.,1
An employee was using a manlift to reach a platform and remove material from the infeed conveyor. As he stepped out of the manlift onto the platform he fell about 8 feet and landed on a pile of shredded metals. The employee suffered a C-5 vertebra fracture and was hospitalized.,1
"An employee serviced a machine and upon restarting the machine, the cutting knife partially amputated the employee's fingertip.",0
"An employee was working in a trench excavation. A section of the excavation began to collapse, and the employee's leg was struck and broken by the falling soil as he tried to get out. He was hospitalized.",1
An employee had placed a metal part on a parts table. The part then slid off the table and struck the employee's lower right leg causing a laceration that required hospitalization.,1
An employee was placing a large bulk bag that weighed approximately 1000 lbs. onto a pre-positioned pallet utilizing four eye rings attached to the bulk bag when his right thumb was caught between the forklift tine and the bulk bag ring resulting in a fingertip amputation.,1
"There was a natural gas leak in the sewer line of a facility. An employee lit a cigarette, which ignited the natural gas and resulted in an explosion inside the store. The employee suffered burns and was hospitalized.",1
An employee was delivering a newspaper. The employee's car started rolling and the employee was run over by the car as he tried to stop it. The employee sustained a broken clavicle and a fractured left ankle.,1
An employee was positioning dough when a chain and sprocket under the reciprocator amputated his left ring fingertip.,1
"An employee was poking material inside a storage bin to get it to flow. The employee fell about 4 feet and struck their ribs on the lid of a conveyor. The employee suffered three broken ribs and was hospitalized, required surgery.",1
"An employee used a 20-pound dry chemical fire extinguisher to extinguish a fire under the furnace on a melt deck. The employee began to have trouble breathing and was hospitalized, suffering from smoke inhalation.",1
"An employee was reconnecting an 80-foot pipe. The pipe pinched the employee's right ring finger, causing the amputation of the finger.",1
"An employee slipped a separator over the end of the beam and was using a 10-ton overhead crane to lift the beam. As the employee was placing a wood block in place, the separator slipped off the end of the beam, and the beam fell onto the employee's left index finger. The fingertip was amputated.",0
An employee was using a slicer to cut vegetables and amputated the tip of his right thumb.,0
"An employee was preparing a boulder for demolition. The employee drilled the boulder in two places using a jackhammer and loaded the first hole with a charge. The charge was a dud so the employee flushed out the hole with pressurized water. The employee put gel into the second hole to expand and hold the charge. The second charge was also a dud. The employee flushed the second hole with pressurized water, releasing both charges. The employee drilled another hole and an unknown charge released, causing debris to go into the employee's face and arms. The employee was hospitalized.",1
"While walking in the back hallway behind the bakery, an employee slipped on a grape and fell, suffering a broken right leg and a knee injury. The employee was hospitalized, requiring knee surgery.",1
"An employee was on a section of an extension ladder, installing caulking in a wall approximately 8 to 10 feet from the floor level. The ladder slipped away from the wall and the employee fell to the ground, suffering a broken right arm requiring hospitalization and surgery.",1
"An employee was trying to dislodge a part jammed on a conveyor. The conveyor caught the employee's glove and pulled in the employee's left hand, causing fractures to the index and ring fingers and amputating the middle finger.",0
An employee was preparing to vaccinate sows using a needle-free injection gun. The gun engaged and injected the employee's left palm. The employee experienced an allergic reaction.,1
"An employee was cleaning floors, tripped, and fell backward resulting in a head injury.",1
"An employee slipped and fell while descending a ladder. The employee landed on the ground about 3 feet below, suffering a dislocated ankle and a broken lower leg.",1
"An employee had a long screw auger set on pipe stands approximately 4 feet from the ground. One of the pipe stands tipped as he was adjusting the auger, causing the auger to fall onto his foot and fracture it.",1
An employee was bitten on the right hand by a dog while checking in the dog for an exam. The employee required surgery and hospitalization.,1
"A piece of material had become stuck in a machine. Two employees were working to deactivate the machine and remove the struck piece; as one employee removed the piece, the machine activated and broke the other employee's leg.",1
"An employee was working with precast forms. A form was lowered and struck the employee's left hand, dislocating and lacerating his knuckle. He was hospitalized.",1
"An employee was using a pressure washer to clean the floor of a food truck. Pressurized water struck the employee's leg, causing a 1-inch laceration.",1
"On 7/19/2021, an employee had been sampling vegetation when they began to experience symptoms of heat stress and dehydration afterwards, resulting in hospitalization.",1
"An employee was driving an industrial yard truck to move semi-trailers in the yard. He was hooking the airlines of a trailer with his foot on a step when he lost his footing and fell off the side of the truck, about 36 inches, onto the asphalt/concrete ground. The employee stuck his head on the asphalt/concrete and suffered a brain bleed as well as cuts and scratches. The employee was hospitalized.",1
"An employee was walking, slipped on wet slurry, fell, and broke his femur.",1
An employee was loading boxes onto a truck when they fell from the ramp and struck the edge of the semi-trailer. The employee sustained fractured ribs.,1
"On July 19, 2021, an employee was working on the clean-in-place (CIP) system and was burned on the chest, stomach, arm, and leg by pressurized hot liquid.",1
"An employee was loading lumber and gusset plates into a splicer machine which presses the plates into the lumber to connect them. The employee's forearm was caught in the point of operation when the machine started, resulting in a fractured and lacerated right forearm.",1
An employee was holding wood down on a table saw. The sawblade amputated the employee's left thumb.,0
An employee was trying to manually untangle wire from a rack when the coil of wire became unsteady and fell toward employee. The employee fell to the concrete floor and the coil fell on their lower body. The employee sustained a fractured hip.,1
"An employee was moving a motor vehicle in the company parking lot. The employee exited the vehicle, slipped on the ground that was wet from the rain, and fell between the open vehicle door and the door frame. The vehicle began to roll backward, dragging the injured employee. The employee sustained injuries to the knee, elbow and side.",1
"At about 11:30 a.m. on July 19, 2021, an employee was on a ladder when the ladder slipped out at the bottom. The employee fell to the concrete 5 or 6 feet below, landing on their right side and suffering fractures to the right foot and shoulder. The employee was hospitalized.",1
"A employee had pulled a rope out of a chipper. He laid the rope on the ground and then picked up a pile to place in the chipper. The rope also went into the chipper, while wrapped around the employee's leg. As the rope was pulled into the chipper, the employee sustained rope burns and bruising.",1
An employee was moving a section of PVC pipe to a pipe rack when their left hand was caught and crushed between the section of pipe and the rack.,1
"At about 12:00 a.m. on July 19, 2021, an employee had just cut through an aluminum part on a bandsaw when the blade lacerated the employee's right little fingertip.",1
"An employee was bent over checking spill buckets at the fuel station and was struck by a pickup truck. The employee sustained lacerations on the ear and head, a broken finger, and an abdominal injury.",1
"An employee tripped over a portable wall partition and fell to the ground, suffering a head injury and a broken arm that required hospitalization and surgery.",1
An employee was setting the 5th wheel onto a truck body. A hoist moved and its hook caught on the 5th wheel. The employee's left index finger was caught in a bolt hole and the fingertip was amputated just below the nailbed.,0
"An employee was performing maintenance on a load cell. Their right hand was on an RPM sensor of rotating weights when the pump jack cycled on, resulting in amputation of three fingertips on the employee's right hand.",1
An employee was moving a part on a rolling rack. The employee grabbed a piece that was hanging. The jig then fell and lacerated the employee's arm.,1
"On July 20, 2021, an employee was using a jig to grind metal rods. As the employee was removing a part from the jig, the jig pinched the employee's gloved, right index fingertip. The employee suffered an amputation to the fingertip.",0
A winch on a waste collection vehicle was reeling in cable. An employee's left hand was caught between the cable and the vehicle; the employee suffered three broken bones and a laceration to the hand.,1
"A crew, working for Red Diamond Energy Services, was laying down 2 7/8-inch tubing. The employee on the floor would unlatch the elevators slightly above the floor. The joint would bounce and the employee on the ground would grab and slide the tubing down the rack. While the 29th joint was being laid down, the employee's right ring finger was crushed between the tubing and the floor as the joint bounced resulting in amputation.",0
A temporary employee was using a blasting pressure hose with chemicals in the pulp area when the hose hit their left side on the upper back and left armpit area causing a laceration.,1
"On July 20, 2021, an employee was operating a grommet machine when it cycled and caused an amputation to the employee's thumb.",0
An employee was assisting with installation of fiber optic conduit pipe when he tripped and fell into a trench.,1
"An employee used a safety cage with a gangway stair that is attached to an overhead catwalk and lowered onto the tanker truck to disconnect a hose on top of the tanker and close the tanker. The truck started moving back while the employee was on top of the truck and her legs were caught between the tanker trailer and the lowered gangway stair. The employee suffered two broken bones in the right leg, a fractured left leg, and a fractured spine.",1
An employee was assisting a new employee when her right hand was caught in the powered conveyor rollers resulting in a friction burn and internal damage that required surgery to her right ring finger.,1
"An employee was using a water hose to cool down a forklift's radiator. The radiator discharged steam and hot radiator fluid onto the employee, who was burned.",1
An employee was driving a forklift in the parking lot and went over a metal grate that caused him to fall out of the forklift. His left foot was run over by the forklift and injured.,1
"An employee was operating an air lock while repairing a BMO system when their right index finger contacted the air lock, resulting in a fingertip amputation.",0
"An employee was operating an unloaded forklift on a paved surface outside of the building to return the forklift to the parking lot. When the forklift turned, it tipped over and the employee, who was wearing a seatbelt, remained in the seat with one leg turned up under him and the other behind him as he faced the ground. His left foot and right leg were fractured.",1
An employee developed heat stress/dehydration and collapsed while moving household furniture.,1
"On July 20, 2021, an employee was rolling and cutting galvanized sheet metal using a crimp and beading machine. As the sheet metal was feeding into the machine, the sharp edge of the sheet metal cut her left middle finger resulting in medical amputation.",1
"An employee was lowering machinery into a vat of caustic chemical using an electric hoist and crane. An I-bolt (screwed into the heavy machinery and also being held by the hoist) broke, and the machinery dropped into the vat. Caustic splashed the employee's clothing, who suffered burns and was hospitalized.",1
An employee was pulling a box off a pallet and fell to the ground. The employee sustained fractures to the right femur and tailbone.,1
An employee was loading a roll onto a lathe. The employee's right hand was caught between a piece of equipment and the chuck jaw of the lathe. The employee suffered an amputation to the little finger.,0
"An employee was loading his catering truck when he fell off the back of the truck and hit his head on the sidewalk, resulting in a concussion and a laceration on the back of the head that required hospitalization.",1
"On July 20, 2021, at approximately 8:00 a.m., an employee was on a 6-foot high rolling platform ladder hanging 10-foot metal hooks on a chain. The employee was hanging a hook when one of the hook ends got caught in the handrail of the rolling platform ladder and tipped it over. The employee fell to the concrete floor and sustained a contusion to their side.",1
An employee was helping close a vault door. The door caught her left hand and severely lacerated her middle and index fingers.,1
"An employee was moving upper booms when their right hand was caught in a pinch point between the hoist hook and the lifting attachment, resulting in a partial amputation of their thumb.",0
"An employee was using a powered pallet jack to unload a trailer. As the pallet jack reversed, it pinched his foot against another, parked pallet jack. He suffered a broken blood vessel.",1
"An employee was trying to put the strap on the quick-connect on a bucket excavator so it could pull a pipe out of the ground. As he was trying to connect with a pin, the pin slipped out and his finger slipped into the pinhole. He suffered amputations to the right ring finger down to the knuckle, as well as the tip of the middle finger.",0
"A cook was working in the kitchen, slipped on some food debris on the floor, and fell breaking a hip.",1
"An employee was transferring potassium hydroxide (50-70%) from an IBC tote into a blending tank using a pneumatic double diaphragm pump in the transfer area at the facility. The hose disconnected during the transfer and potassium hydroxide (caustic potash) caused chemical burns on the employee's face, neck, and upper torso. The employee was hospitalized.",1
Employees were screwing a running tool into a wellhead assembly. The injured employee's finger was in the wellhead assembly checking alignment when the assembly was manually rotated and the running tool amputated the employee's left index fingertip.,0
"An employee was trotting down the shoulder of a roadway along side the garbage collection truck. As the truck approached a home that had trash out for collection, the employee moved toward the moving truck to retrieve his work gloves. As he reached for the work gloves, his right foot was positioned behind the rear outer dual tire which struck his ankle and fractured it.",1
An employee was performing maintenance on an air compressor when their finger was caught in the belt and pulley resulting in a fingertip amputation.,0
"On July 20, 2021, during a scheduled break time, a technical assembly employee went to kneel on the bench of an outside picnic table, missed the bench, and struck her knee against the concrete ground surface, resulting in a broken left hip. The employee was hospitalized for surgery.",1
An employee was dumping a rear load container into a residential garbage truck when their hand was crushed by the cable on the rear load truck.,1
"An employee was calibrating elevated refrigeration probes while inside a cage about 15 to 20 feet off the ground, chained and padlocked to the forks of a forklift. The forklift backed into a safety bollard. The cage broke free as the chains and padlock snapped. It fell to the ground and the employee suffered a broken back with spinal cord damage.",1
"A temporary employee was in the warehouse standing next to his electric pallet jack and stacking cases of soda onto his pallet when he was struck by another pallet jack, resulting in a fractured left fibula.",1
"An employee was working in an isolated, de-energized section of a switch gear. The metal wall on one side of the section made contact with an energized terminal. In the resulting arc flash, the employee suffered burns to the upper back and neck.",1
"An employee's hand was between the plates of a stopped 60-ton press. The machine engaged and severely injured two fingers on the employee's left hand, crushing one and amputating the other.",0
"On July 20, 2021, an employee was operating a 60-ton mechanical power press when their right hand was caught in the point of operation resulting in amputation injuries to two fingers and a crushing injury to another finger.",0
"Employees were adjusting the length of a spreader bar on rigging. The spreader collapsed and the injured employee's left middle finger was pulled into the spreader, resulting in a fingertip amputation.",0
An employee was performing preventive maintenance on a blower motor. The belt on the pulley amputated the pad of the employee's right middle finger without bone loss.,0
"A temporary employee was training on a stand-up forklift. The forklift spun and pinned the employee's left leg against some racking, and he struck his head against the racking. The forklift then ran over his left foot, crushing the ankle and resulting in an amputated foot.",1
"On July 20, 2021, an employee was climbing an 8-foot step ladder when he missed a rung and fell to the floor. He was admitted to the hospital for fractured ribs and a back injury.",1
"An employee was moving a ladle of molten metal by monorail tractor when molten metal spilled onto his leg, causing third degree burns to his foot.",1
"An employee made lumber adjustments and got onto a forklift when they noticed more adjustments were needed. The employee leaned forward while on the forklift when a lever caused the lumber to move, causing a fingertip amputation.",1
An employee suffered a hernia while picking up a package for delivery.,1
"An employee was in a non-climate-controlled building, applying packaging material to furniture in preparation for shipment. The employee developed a possible heat-related illness.",1
An employee was installing a ground rod. The employee slipped and the ground rod struck his throat.,1
"An employee was working on a motor condenser when he received an electrical shock, knocking him backward and resulting in a dislocated shoulder. The machine was not locked out/tagged out at the time of the incident.",1
"An employee was assisting with staging a conveyor to install a new conveyor belt. As the new conveyor belt roll was being lowered to a stand, the employee was removing the roll straps. The straps amputated the employee's left index and middle fingers to the first digit.",0
An employee experienced first and possibly second degree burns to his back and shoulders when a machine that cooks beans overflowed and splashed him with hot water. The employee was hospitalized.,1
"A mechanic was on top of the HHP in Bay 1 drilling out broken bolts. Another operator was running the overhead crane using a handheld remote, moving it from the south side of the HHP to the north side to pick up a fluid end. As the crane moved over the top of the HHP, it struck the mechanic, knocking him off the HHP onto the cement floor of the shop 13 feet below. The injured employee was hospitalized for broken ribs, a sprained wrist and stitches to the face.",1
An employee was on a ladder changing letters on the outdoor sign. The ladder shifted and the employee fell to the ground resulting in a fractured ankle that required hospitalization and surgery.,1
"An employee tripped on the corner of her desk while getting up. She fell to the floor, suffering a displaced fracture to the right hip.",1
"A driver exited their van to make a delivery. The van began to roll away and as the employee attempted to stop it, a wheel ran over his foot and fractured toes.",1
"A maintenance employee was replacing a roller adjuster on a piece of equipment and was attempting to remove a bearing from the left side of a solid steel shaft. The right end of the shaft slipped out of its bearing and dropped suddenly. The left end of the shaft then moved in an upward direction and pinched his left thumb between the bearing and the machine frame, resulting in amputation of the fingertip and nail.",0
An employee was working on a roll bagger machine and suffered a partial amputation of their thumb.,0
"An employee was filling bait boxes and tracking moles at customer sites. The employee began suffering dizziness and tunnel vision and was hospitalized, suffering from dehydration/heat stress.",1
"An employee was troubleshooting a voltage switch on an elevator. His thumb was caught in a belt, resulting in an amputation.",0
"An employee stepped onto a mason scaffold that collapsed. The employee fell with the scaffold, sustaining a head laceration, and fractures to the ribs, clavicle, and thumb.",1
An employee was pointing to a part of a machine. His right index finger was caught by tubing that was into the machine to be processed. The fingertip was amputated.,0
An employee was taking out trash when he slipped and fell to the floor causing a right hip fracture.,1
"An employee was in a warehouse, positioning dunnage in a container for incoming 1,400-pound plywood bundles. A bundle pinned his left leg, breaking the femur.",1
"On July 21, 2021, an employee was feeding reclaimed lumber into a wood jointer when his left ring finger contacted the machine's rotating cutter head, resulting in an amputation above the top knuckle.",0
"An employee was troubleshooting a vertical stamp press when their right hand was caught in the press, resulting in severe injury to three fingers.",1
"On July 21, 2021, an employee fell about 7 feet from a sifter in a mill. She suffered three broken ribs and a collapsed lung and was hospitalized.",1
An employee's hand was caught in the blades of a wall-mounted fan that pulled air out of a building. The employee suffered amputations to two fingers.,0
"An employee was performing maintenance and repair work on a boat. When the boat was started up, it caught fire and exploded. The employee suffered second-degree burns to the face, hands, and legs.",1
"The injured employee was installing pallet stops on the floor using an impact wrench. A scissor lift moved and the tire caught the employee's pant leg and pinned his leg under the tire, resulting in a compound fracture of the left leg.",1
An employee was cutting a 2 x 4 on edge using a table saw. The push stick he was using broke and his left thumb slipped into the saw blade. Three-quarters of the thumb was amputated.,1
An employee was delivering a certified letter and was attacked by a dog. The employee sustained bites to the leg and arm that requires stitches and hospitalization.,1
An employee was in a restaurant attic running printer cable. He fell through the ceiling onto the restaurant floor. He suffered a concussion and a broken arm and was hospitalized.,1
"An employee was working at a demolition site. A steel beam struck the employee's lower right leg, breaking it.",1
"An employee was walking the grounds toward the guard shack and was bitten by an unknown insect (possibly a spider) and suffered severe stinging, discoloration, and swelling in his left ring finger.",1
An employee's face was burned by asphalt mixture. The employee was hospitalized.,1
"An employee was laying sheet metal decking at a roof elevation. He fell from the roof to a slab of concrete, suffering broken ribs and a broken pelvis.",1
An employee was in a guardhouse when an insect stung/bit him. He was hospitalized.,1
An employee was using a banding machine when it injured his left little finger. The fingertip was medically amputated.,0
"On July 22, 2021, an employee was doing underground electrical work. After beginning work at 8:00 a.m. and taking a lunch break at 11:30, he became ill at about 2:00 p.m. He was hospitalized, suffering from heat exhaustion.",1
"An employee was walking on the main wooden beam inside the attic of a newly built one-story house. When he stepped onto the cross member beam, it gave way. He lost his balance, hit an extension ladder, and fell 10 feet to the concrete floor in the garage. He suffered a broken tailbone and was hospitalized.",1
"An employee fell from a Baker scaffold while it was being moved, landing on the concrete floor about 6 feet below (and on a tool belt, tape measure, and tool belt hook). The employee suffered a broken left leg.",1
An employee was herding cattle with a utility terrain vehicle. The vehicle rolled over and the employee suffered a fracture and puncture wound to the leg.,1
"At about 3:45 p.m. on July 22, 2021, an employee became ill during a scheduled break from working at a resort attraction's outdoor guest services kiosk. At about 5:10 p.m., the employee was found lying semiconscious next to a vehicle in the parking lot. He was hospitalized, suffering from possible heat-related illness.",1
An employee was descending a pole after performing trimming activities when he kicked his 20-inch pole saw and the saw began to fall. The employee attempted to catch the pole while it was falling and the blade lacerated the webbing of his right hand between the index finger and thumb.,1
An employee was installing fascia with a drill while standing 4 feet above the ground on a fiberglass ladder when they fell onto the concrete below and suffered a broken right wrist.,1
"An employee was installing a new belt on the grinder machine. As he was manually rotating the pulley wheels to align the new belt, his right index finger was caught between the belt and one of the wheels resulting in a fingertip amputation.",1
"A Spectrum employee was installing a coaxial cable line through a suspended ceiling. He was using a 6-foot A-frame ladder to access the ceiling near a wall to run glow rods through to the next room. The glow rods became stuck in the ceiling; as he tried to free them, he lost his balance and fell to the floor about 5 feet below. He suffered injuries to the right arm and ribs.",1
An employee was walking in the warehouse and lacerated his leg on a piece of metal banding.,1
"An employee tripped on the metal webbing of a set of bleachers. The employee fell, suffering a broken left ankle, and was hospitalized.",1
An employee was shot while on break.,1
"An employee was struck by a forklift that was backing up out of a trailer, resulting in a broken ankle and injured knee that required hospitalization.",1
"An employee was climbing down a ladder from a roof. The ladder slipped out and the employee fell to the ground, suffering a broken L4 vertebra.",1
An employee was breaking down a malformed bottle with a box cutter. The box cutter slipped and amputated the side of the employee's left thumb.,0
"An employee was making repairs on a dryer when a come-a-long chain holding a 250-pound diagonal brace broke. The brace fell and struck the employee's foot, fracturing it.",1
"An employee was clearing jammed material from a pelletizer with a rotating cutter. As he was removing uncut strands of acrylic from the guide tray, his left index finger was pinched between the two feed rolls of the pelletizer. The rotor blade then cut his finger, causing the amputation of the fingertip.",0
An employee was using a saw to cut a wind turbine blade for recycling. The saw kicked back and lacerated the employee's upper right chest.,1
"An employee was using a metal rod to dislodge a grain blockage from the outside of a grain bin withdraw chute. When the blockage cleared, the rod twisted down and contacted the drag conveyor below. The rod was then pushed against the chute and pinched the employee's hand resulting in amputation of the ring finger and a contusion on the middle finger.",0
"An employee was walking from the third floor to the fifth floor to put materials into a bin. He slipped and fell on steps, suffering two jaw fractures and a shattered chin.",1
"A dog attacked a mail carrier, who fell backward to the ground while defending herself. She suffered a hairline fracture to the back.",1
A temporary employee was cutting IBC bags of barite into a metal hopper to unload product. The employee's left hand was on the edge of the hopper as a forklift approached with a bag. The employee's pinky finger was caught between the hopper and the bag resulting in a partial amputation.,1
"An employee was unjamming a board in a planer machine. The machine's roller crushed his right hand, breaking the wrist and amputating a finger. He was hospitalized.",1
"An employee fell from a portable ladder to the ground, suffering multiple fractures.",1
"An employee was moving a pallet jack when his foot got caught up in the wooden pallet, causing him to fall to the floor.",1
"An employee was shoveling dust and water around a baghouse. As the employee tried to clear a clog in a drain hole, an auger grabbed his right glove, amputating the middle finger at the first joint.",0
"An employee was standing on a plastic pipe, checking a secondary pipe print line. The pipe rolled back on top of the employee, who was pinned to the pipe stack and suffered a broken right femur.",1
A roll stock packaging machine was started as an employee was unjamming it. A cross-cut blade on the machine amputated the employee's left index finger.,1
An employee was using a transmission jack to lift a transmission. The jack lacerated a finger on the employee's left hand.,1
"An employee fell down in a parking lot, suffering face and elbow contusions.",1
"An employee was carrying out a diamond wire cutting process on a tank. When the employee pulled on the diamond wire cable, his right ring finger was pinched between it and the pulley. The finger was amputated to the last knuckle.",0
"An employee was using a forklift to stack tires for loading. The employee set a tire in place and got off the forklift; the tire then fell on him, breaking his leg.",1
An employee was welding on an empty hydraulic tank. A flash occurred and the employee sustained second and third degree burns to the neck and arms.,1
"A temporary employee was standing on a conveyor when an alarm went off, signaling that a shredder was about to start up. The employee, startled, rolled off the conveyor and fell to the ground about 8-10 feet below. He suffered a broken pelvis and was hospitalized.",1
"An employee removed a flag pin to replace a hydraulic cylinder during servicing of a loader. The upper part of the machine frame separated, causing a hinged coupler to fall to the floor from an ""upward"" position, crush the employee's feet, and knock him down. He suffered fractures to both feet and a broken wrist.",1
An employee was driving a ride-on forklift. The employee had to swerve to avoid another powered industrial vehicle and her right foot was caught between the two vehicles and broken.,1
"An employee was wrapping finished rolls of paper when their right leg became caught in a gap between the platform and the wrap machine's roller, resulting in fractures to their lower right leg and ankle.",1
"An employee was operating a core machine, removing the core from the core box. The top part of the core box (cope) struck the employee in the left leg, breaking the employee's tibia.",1
"An employee was driving a front-end loader from one yard to another when the engine shut off, leaving him with no power to control it. He jumped clear of the loader and broke his left leg when he hit the ground.",1
"At about 6:00 p.m. on July 23, 2021, an employee was using a forklift to empty a pellet hopper into a roll-off box. The hopper bounced back and the employee's left index finger was pinched between the forklift fork and the hopper's channel iron base. The employee suffered an amputation to the finger.",0
"An employee was moving a concrete block off a sorting line and into a bunker. The concrete block was positioned on top of a 5-gallon bucket. While moving the block, it dropped 6 inches off the bucket and onto the tips of his right middle and ring fingers. The employee suffered a laceration to his right middle finger and a fracture to his right ring finger.",1
"An employee felt ill after his shift and was hospitalized, suffering from heat-related dehydration.",1
"An employee slipped on some plastic banding and fell, suffering a head injury.",1
An employee was tending residents as they ate breakfast. One of the residents grabbed the employee's hand and bit off the top part of her thumb. The employee was hospitalized.,1
"A docking block partially released as it was being hoisted. It struck an employee and knocked him off an A-frame ladder to the ground. He suffered right leg, arm, and abdomen injuries from the block and the fall.",1
"An employee was standing on a trailer adjusting its load. A piece of equipment shifted, causing the employee to fall to the ground and strike his head. He suffered head trauma.",1
An employee was changing a belt on a ventilation fan when he lost balance and contacted the blades of an adjacent fan. He sustained lacerations to the left hand and wrist.,1
"Two employees were trying to get a cardboard sheet from behind 24 pieces of cold-rolled steel sheets that were leaning against a wall. One employee was supporting the sheets from the front as the other was removing the cardboard. The sheet metal started to tip forward, knocking the first employee to the floor and causing an injury to her right ankle that included broken bones, cut tendons and nerves, and a partial amputation.",1
"An employee was holding plywood form work while another employee was using a wrecking bar. The plywood form struck the employee's right middle finger, causing an amputation to the fingertip.",1
"An employee was operating a stand-up forklift. As it turned, his left middle finger was caught between the upright to its overhead guard and a pallet on a rack. The finger was amputated.",0
"An employee was moving metal coils on a cart. The cart tipped and the coils fell off, breaking the employee's leg.",1
"Two employees were retrieving plastic grocery bags. One employee slipped on some bags that had fallen to the floor, fell, and suffered a broken hip.",1
"An employee was monitoring a machine during a plastic manufacturing process. The machine released formaldehyde into the work area and the employee suffered an irritated mouth, nose, and throat.",1
"A substation employee was removing bolts from a recloser bushing. The employee's hand made contact with an energized wire, causing electrical burns to the employee's hand and leg.",1
"The injured employee was standing on the left side of his pallet jack applying stickers to it. A co-worker was operating a pallet jack in the same area. The co-worker was moving to pick up a pallet and the equipment jerked to the left and struck the injured employee's left foot and ankle, pinning them to the pallet jack. The employee's foot and ankle were fractured.",1
An employee was preparing to make a cardboard bale using the box baler. He was unjamming a piece when his fingertip was caught between a chain and the wall of the machine resulting in amputation.,0
"An employee was helping a crew change a transformer. The line section had just been isolated when the tip broke off an elbow, causing the employee to be shocked and suffer burns to the left foot.",1
"On July 24, 2021, an employee was cleaning egg-breaking machines with a corrosive chemical. The chemical burned the employee's knees and lower legs, and the employee was hospitalized.",1
"An employee was working on a large laundry ironer/steamer. His finger got caught in a rotating chain, and his right index fingertip was amputated.",0
"On July 23, 2021, an employee suffered a lower back strain while lifting a hydraulic torque wrench that weighed 50-60 pounds. The employee was hospitalized.",1
"An employee was delivering a package to a residence when he tripped over a large boulder in the yard, resulting in a fractured left knee.",1
"An employee was on a break after working on a vehicle. When the employee lit a cigarette, brake cleaner on the employee's hands caused the employee's gloves to ignite. The employee's hands were burned.",1
"On July 24, 2021, at 4:15 p.m., an employee and a co-worker were verifying prior work done on a machine. The employee had his hand in the freezer bar sealer area when the co-worker activated the machine by opening the air valve that powered the sealer. The sealer then closed on the employee's right hand, resulting in an open fracture and an amputation of the middle fingertip.",0
An employee was struck by a forklift and suffered a broken foot.,1
An employee fell from a multi-level mobile scaffold to the concrete floor. The employee suffered a broken leg/ankle.,1
An employee was operating a yard truck to pull a trailer when the yard truck blew two tires. The truck lunged forward and the employee was hospitalized with injuries to the rib cage from the seat belt.,1
"At about 8:55 a.m. on July 24, 2021, a border patrol agent suffered multiple bee stings and was hospitalized.",1
"A meat hook trolley fell, catching an employee's hand on a tray. The employee's right little fingertip was amputated.",0
"Two employees were washing a semi-truck on a wash pad in a yard. Near the end of the job, the truck was moved ahead about 30 feet while one of the employees was still on it. The employee fell from the catwalk on the back of the tractor trailer and was run over. The employee suffered a broken pelvis, a broken right femur, and a degloved left thigh. The employee was hospitalized.",1
"An employee tripped on a crack on the concrete pavement of a courtyard. She fell, breaking her left hip and suffering a contusion.",1
"An employee got off a forklift he had been operating. The forklift rolled back onto him, pinning and breaking his leg.",1
An employee was cleaning the contacts of the tie bar inside a 480V switchgear and suffered burns from an arc flash. The employee received third degree burns to his arm and first degree burns to his face.,1
An employee was cleaning a printing press. The press rollers caught the employee's right hand and degloved it.,1
An employee was standing at a roller conveyor when it started up. The employee's gloved hand was caught in a roller. The employee suffered a degloving injury and was hospitalized.,1
"At 4:34 p.m. on July 25, 2021, a customer shoved a store employee to the floor, injuring the employee's hip. The employee was hospitalized.",1
"An employee was climbing out of a containment basin after closing a valve on a sodium hydroxide tank. The legs of his chemical protective suit slid up, allowing a small amount of sodium hydroxide solution to run down his legs and burn them.",1
"An employee was working on a platform. As he turned to get a tool, he stepped into an open hole, fell partly through an open pass-through gate and struck the platform. He caught himself on the ladder and the platform, but suffered two fractured ribs and a punctured lung.",1
An employee got off an electric pallet jack as it was coming to a stop. The pallet jack injured the employee's right foot.,1
An employee was moving a 55-gallon drum. A rotary valve lacerated the employee's left index and middle fingers resulting in a partial amputation.,1
"An employee was carrying a 2.5-gallon bucket up some stairs. He fell, and the chemical in the bucket spilled onto his upper torso and face causing chemical burns.",1
"A forklift struck an employee, who suffered multiple contusions to the entire body.",1
"On 7/26/2021 at 1:08 p.m., an employee entered a customer's residence to investigate a natural gas odor. The house exploded and the employee sustained burns to their hands, arms, chest, and face that required hospitalization.",1
"An employee was using an overhead crane when its hook got caught on the bed of a hydraulic press. When the crane was being lowered, the hook slipped, struck the employee's left arm, and broke it. He was hospitalized, requiring surgery.",1
An employee was cleaning a board with a hand-held circular saw. The board slipped and the saw amputated part of the employee's left ring finger.,0
"On July 26, 2021, an employee was hydroblasting using a 5,500 psi water blast gun with a 66-inch barrel. The barrel was run across the top of his left boot, lacerating the top of the foot. He was hospitalized, requiring cleaning and stitches for the wound.",1
"An employee was in the back of a truck when they fell to the ground, resulting in multiple injuries.",1
An employee was reaching for a timing belt that was on the peg board when they fell off a 14-inch-tall cabinet and suffered a broken left hip.,1
"While cooking in a daycare center kitchen, an employee developed exhaustion, sweating, and shortness of breath. The employee was hospitalized, suffering from heat exhaustion.",1
"An employee lost consciousness due to heat, fell to the floor, and suffered a broken elbow.",1
"An employee was spray-painting a square iron beam when it rolled onto the employee's right wrist, causing a severe cut to the wrist.",1
An employee was reaching out to place merchandise on shelves. His middle and ring fingers got caught on a shelf and both fingertips were amputated.,0
An employee was cleaning a paint spray gun. The gun activated and injected paint thinner into the employee's left little finger.,1
"An employee lost her balance while riding an escalator and fell to the floor, suffering four broken ribs and a brain bleed.",1
"An employee was working on a two-tier frame scaffold when they fell to the ground, resulting in a laceration to the middle and back of the head.",1
"An employee was operating an automated drill and rivet machine and was getting the machine lined up against the crossmember on the trailer side. As the employee was feeling for the crossmember, the machine cycled and the stability bar engaged, resulting in amputation of their index fingertip. The machine was guarded at the time of the incident.",0
"An employee was trying to clean a roller with a spud hoe. The hoe struck the employee, lacerating his face and breaking two ribs.",1
"On July 26, 2021, an employee was on the riding step of a garbage truck picking up garbage on a dirt road. The truck got close to a tree, knocking the employee off the riding step and resulting in bruising on his left thigh that required hospitalization.",1
"On July 26, 2021, an employee became ill after a hot, humid day spent preparing aluminum fishing boats to be painted. She was hospitalized, suffering from dehydration.",1
"After carrying a suitcase generator (weighing 45-50 pounds) from a tower to a substation about 125 feet away, an employee felt hot, collapsed, and was hospitalized, suffering from possible heat exhaustion/heat stress.",1
An employee removed a weld mint (welded part) from an A-frame cart using a hoist and proceeded to maneuver the part onto a pallet for packaging. The employee's finger got pinched between the hoist hook and the part. The employee sustained an amputation.,0
"On July 23, 2021, an employee was descending from a tanker trailer ladder in heavy rain. He slipped and turned his ankle on a curb, suffering fractures to the ankle and the lower leg. He was hospitalized.",1
"At about 7:40 a.m. on July 26, 2021, an employee was settling a bundle of four pieces of square tubing onto a workbench when the tubing shifted and slid onto his left hand and index finger. The finger was pinched and crushed between the tubing and a piece of channel on the workbench, causing an amputation to the fingertip above the nailbed.",0
"An employee was climbing down a ladder. The employee fell, landing on the ground about 12 feet below.",1
"An employee and co-workers were working on taking a cable up a grain leg so they could re-install the belting and buckets for the leg. While turning the drum on the grain leg with his right hand, the employee's left hand was caught between the pulley and the belts on the reducer, resulting in amputation of his little fingertip.",0
An employee was throwing construction debris into a dumpster. A piece of block debris lacerated his right bicep. He was hospitalized.,1
An employee fell while getting out of a car in a parking lot. The employee suffered an arm/shoulder fracture.,1
"An employee was walking on a board being used as decking while a bridge deck was replaced. The board broke and the employee fell to the ground about 12 feet below, suffering fractures to two vertebrae and the pelvis. The employee was hospitalized.",1
An employee was moving goods in a trailer with an electric pallet jack. The employee's left hand struck the side of the trailer and the little finger was crushed. The injury required a medical amputation to the finger.,0
"An employee was operating a high-reach powered industrial truck when it collided with a load being carried by another powered industrial truck. The employee's foot was caught between the vehicle and the load, causing an ankle/foot injury.",1
"An employee was cutting beef with a meat saw when his right thumb contacted the saw blade, resulting in a fingertip amputation.",0
"On July 26, 2021, an employee was working inside a tank as part of a crew erecting a scaffold. After beginning at 9:30 a.m., though he had been taking breaks and drinking fluids, he developed cramps at about 6:00 p.m. He later developed nausea, became ill, and was hospitalized with dehydration and an acute kidney injury.",1
An employee was waiting for a cassette pallet to advance to his station. The cassette settled on guide pins and fell into position where the employee's hand was. The employee's left index fingertip was amputated.,0
"An employee noticed a person in front of a store with a handgun, acting erratically. The employee left the store and retrieved a handgun from his personal vehicle. On his way back into the store, he was shot in the back of the head by the person. He suffered paralysis from the neck down.",1
"An employee fell from a scaffold ladder while climbing down. The employee landed on concrete about 13-14 feet below, suffering a broken tailbone, two broken back vertebrae, and a broken left ankle.",1
An employee was caught between mechanical components of a trim saw while trying to remove debris. The employee suffered an internal injury to the upper leg.,1
"An employee was clearing a jam on a paper plate machine when they contacted the machine's blade, resulting in amputation of four fingers on the left hand.",0
"On July 26, 2021, an employee was using a pipe grooving machine to cut a groove in a sprinkler pipe. He was checking the depth of the groove when his left hand was pulled into the blade of the machine, causing an amputation of the ring fingertip.",0
An employee was walking when they slipped on plastic material that was on the ground. The employee fell and sustained a fractured left forearm.,1
An employee was working drilling holes to mount a controller box to a running conveyor belt. The employee was checking for metal edges or burr when his left middle finger got caught between the chain and sprocket resulting in a fingertip amputation.,1
"An employee was restarting a plastic machine. Melted plastic got on his right arm, his armpit, and the right side of his torso. He suffered second-degree burns and was hospitalized.",1
An employee was removing fat/meat that was clogging a drain in a separating room. An auger amputated his right index finger.,1
"An employee was working in a manlift when the cables caught underneath the platform extension and prevented the lift from lowering further. The employee went to pull in the extended part when his left ring finger got caught between the top rail and the rail just underneath. The manlift then broke free as the employee's finger was still caught, resulting in a fingertip amputation down to the nailbed.",1
An employee collapsed while picking up trash on a route suffering from a heat-related muscle injury and dehydration.,1
"An employee raised a well pump jack and placed the top and bottom rod clamps on the lifting rod. The bottom rod clamp slipped, causing the well pump jack to lower and amputate the employee's left thumb.",0
"An employee was walking on stilts to install a grid when he tripped over an item and fell to the floor, resulting in a fractured elbow and lacerated forearm.",1
"An employee was banding lumber together. A forklift approached, carrying twin packs of lumber on its forks. When it stopped, the lumber packs slid forward and pinned the employee between two packs of lumber, breaking his hips.",1
An employee tripped on a clamp and fractured his ankle.,1
"At a delivery site, an employee started feeling unwell. The employee was hospitalized for heat exhaustion and dehydration.",1
"On July 27, 2021, an employee fell while stepping down off a chair. She landed on the floor and broke both bones in her left wrist.",1
"An employee opened the door of an enclosure and, while looking at a termination, was struck in the right eye by a disconnect panel shaft. The eye was injured.",1
"An employee was physically assaulted by a patient, resulting in injuries to their head and L2 vertebra.",1
"An employee was using a restoration cleaner to wash a home when the cleaner got into his rubber gloves, causing chemical burns.",1
An employee was doing a hot check in the garage of a high-rise. He came into contact with electrical equipment and was shocked.,1
An employee was operating a paver outside when she became ill due to the heat. She was hospitalized.,1
"An employee began shaking and trembling while installing piping insulation on the third level of a structure. He was hospitalized, suffering from heat exhaustion and dehydration.",1
"At about 5:30 a.m. on July 27, 2021, an employee was changing knives on a piece of equipment. The equipment rotated onto his left hand, and the blades amputated his middle and ring fingers between the first knuckle and the fingernail.",0
An employee was moving a cart when one of its wheels rolled over his foot. He was hospitalized with a crushed foot.,1
"At 6:40 p.m., an employee fell during a sort and was hospitalized.",1
An employee was climbing down a ladder on the back of a trailer. He fell to the ground and suffered a broken right ankle that required surgery.,1
"An employee fell down the last two or three steps of an exterior stair, suffering three factures to the left leg.",1
"An employee slipped and fell to the floor in a mall, suffering a broken pelvis.",1
An employee was performing maintenance on a forklift when their left index finger was pinched and partially amputated by a moving chain on the forklift.,1
"An employee was directing the lifting of 36-inch ducting into place. The employee's left middle finger was caught between the duct and a duct hanger, and the fingertip was amputated.",0
An employee was checking the bond on a plywood panel when they were struck by another plywood panel that came out of the outfeed of a press. The employee suffered a possible neck injury.,1
"While pushing a distance wheel, an employee stepped on a sewer manhole cover that gave way, resulting in an injured right foot.",1
"An employee was stepping out of a truck. The employee's left ankle twisted on a manhole cover, and the employee fell to the ground, suffering a sprained ankle and a ruptured hernia.",1
"An employee was standing on the floor pulling shrink wrap off a pallet of cleaning supplies. The employee lost their footing and fell to the floor, fracturing their right wrist.",1
"While cleaning up a yard, an employee stepped on a nail that was sticking out of a pallet. The nail punctured the employee's right foot.",1
"An employee was climbing a ladder to a roof. The employee fell, their feet becoming tangled in the rungs, and struck their head on a concrete stair landing. The employee suffered a subdural hematoma and a cervical strain and was hospitalized.",1
"An employee was working from a ladder, installing the nuts on bolts that ran through a piece of sheet metal. The sheet metal slipped and knocked him off the ladder to the concrete about 8 feet below. He struck his head on the concrete, suffering head injuries.",1
"An employee was driving a skid loader when it fell through the wooden walkway of a bridge and struck the ground 23 feet below. The employee suffered broken ribs, a broken shoulder, and a spinal burst fracture, as well as biting through his bottom lip.",1
"On July 27, 2021, an employee slipped and fell while donning waterproof rubber boots in a back-splash fabrication and CNC area. The employee landed on the floor and suffered a broken pelvis.",1
An employee was using a right angle drill. The drill was activated and amputated the employee's finger.,0
"On July 27, 2021, an employee was on a straight ladder to check the level of an open aggregate hopper when the ladder slipped, causing him to fall approximately 3-4 feet and resulting in a broken left ankle.",1
An employee suffered an amputation while working on a table saw.,1
An employee was loading boxes weighing 20-40 pounds into a cart to replenish supplies for a pad printing machine when they felt a pop in their lower back. The employee was hospitalized for a lower back injury.,1
"An employee was climbing down a ladder from a platform on a pressure vessel. The employee fell at the second rung of the ladder, landing on the floor and suffering a broken left elbow. He was hospitalized.",1
"On July 28, 2021, an employee was nailing a double 2-inch by 6-inch top plate to the top of a first floor wall. When he fired a pneumatic nail gun into the plate, the nail split the wood, went through the plate, and punctured his hand between the thumb and the index finger.",1
"An employee was installing metal roof panels on a warehouse. He was using a roof runner to bound together the seams on the metal panel when he fell 35 feet off the edge of the roof and landed in a standing position, resulting in a fractured pelvis, a fractured right leg, and lumbar fractures that required hospitalization.",1
An employee was building a pallet using a nail gun and was struck in the left arm by a 3-inch nail.,1
"On July 28, 2021, an Osburn Contractors employee developed leg cramps and difficulty walking after cutting rebar outdoors. He was hospitalized, suffering from heat exhaustion.",1
An employee was pulling a tool cart that had a grease gun hanging on the side. While going through a doorway the trigger of the grease gun was pressed. The employee's right ring fingertip was amputated by the trigger mechanism of the grease gun.,1
"At about 3:10 p.m. on July 28, 2021, an employee inserted a J-shaped hook tool into a leg processor to remove a chicken hind. The machine caught the hook and pulled the employee's hand toward the leg processor's guard. The employee's hand was pinched between the tool and the guard opening, causing an amputation of the little finger above the middle knuckle.",0
"An employee was conducting maintenance on a stacker machine. When the employee adjusted a chain on the machine's conveyor belt, the chain pinched the employee's right index finger and amputated the fingertip.",1
"An employee was shifting empty 55-gallon steel drums from floor level onto a conveyor at the unloading dock. When the employee sat down to take a break, he lost consciousness and was later admitted to the hospital for heat exhaustion.",1
"An employee was removing a 1-inch tube from a furnace undergoing routine maintenance. The 40-foot long tube shattered and fell, hitting the employee on the back. The employee suffered multiple spine fractures and was hospitalized.",1
"Two employees were working on a rig floor, separating the connection on a drill pipe. As they were starting to push the stand of the pipe, one employee slipped in some oil-based mud on the rig floor, fell forward, and put his hands out in front of himself to minimize the fall. The drill pipe moved back slightly and pinched his fingertip against the rig floor, resulting in the amputation of his right index fingertip above the first knuckle.",0
A cart full of lead-lined sheetrock tipped over as it was being moved. Two employees were trapped under it; one suffered several broken ribs and was hospitalized.,1
"An employee working at an outside jobsite suffered heat exhaustion, which caused his muscles to fail after returning to a hotel at the end of the day.",1
"An employee was descending a set of stairs that go from an access roof to a high penthouse roof. The employee slipped on wet plywood and fell off to the side of the stairs onto a roofing davit, landing on his left armpit and resulting in two broken ribs and a laceration to his left lung.",1
"An employee was unloading parts from the paint line when their heel caught on a cart near the work area, resulting in a hyperextended knee.",1
"An employee was replenishing shelves from a narrow aisle reach truck. As the truck turned, the employee's left foot was caught between the operator platform and the protective rail for the shelving units. The employee's middle toe was amputated.",0
"An employee was loading a gang box onto a truck for delivery to a job site. The employee went to jump from the truck to the concrete floor about 38 inches below, but did not clear the lift gate and tumbled forward. His left elbow struck the floor and was broken. He was hospitalized.",1
"On 7/28/2021, an employee was cleaning up product on a powder coating line that had crashed into a support grate. The product pulled the support grate, which caused the employee's left leg to fall into a tank of iron phosphate up to their knee and resulted in chemical burns to their lower left leg.",1
"An employee tripped over a conveyor belt power cord and fell to the ground, resulting in a fractured right hip.",1
"An employee and co-workers were taking apart bison fence panels when a fence panel fell onto the employee, resulting in a broken pelvis, broken vertebra, and a spinal cord injury.",1
"On July 28, 2021, an employee was painting corbels on the roof of a house when he slipped and fell to the grass below. He suffered three broken ribs and was hospitalized.",1
"An employee was cutting wooden boards into smaller pieces using a miter saw. The saw amputated the employee's right thumb and index finger, as well as deeply cutting the middle, ring, and little fingers.",0
"A hose ruptured during a test of a cooling loop system and released hot water on an employee, resulting in burns on his abdomen and legs that required hospitalization.",1
"An employee was assisting with the manual handling and positioning of a de-energized jacketed concentric neutral power cable in an electrical vault. A 15 kV component installed on a transformer failed, resulting in an arc flash that caused second and third degree burns on the employee's hands.",1
"An employee was crossing a materials aisle, moving away from her welding cell, when a lift truck struck her as it backed up. She suffered an injury to the right foot.",1
"On July 28, 2021, an employee was in a scissor lift and could not reach the work area. The employee fell 20 feet to a lower level while reaching over the railing of the basket and sustained injuries that required surgery.",1
"On July 28, 2021, an NG Companies employee was about to transfer mud to a bore pit. He had put the hydro excavation truck in position for the debris transfer and prepared it. When he opened a knife valve, hot water sprayed through the flange onto him, causing second-degree burns to his face, right arm, and right hand; a third-degree burn to part of the right arm; and a broken collarbone. He was hospitalized.",1
"An employee was trying to put a roll of roofing that had fallen off a pallet back onto the pallet when the palletizer gate crushed the employee's chest, resulting in broken ribs.",1
An employee suffered a finger amputation while using a drill during the installation of a car's exhaust pipe.,1
"On 07/29/2021 at 1:15 a.m., an employee was attempting to respool a hoist cable when his glove became stuck to the cable, pulling his left hand into the hoist pulley and resulting in an amputation of the left index finger between the first and second knuckle.",0
Two employees were investigating a 4-inch spent sulfuric acid line to see what was needed for repairs. The line ruptured and sprayed acid on both employees. One suffered burns to his hands and the lower part of his body. He was hospitalized.,1
"An employee was cutting bluestone with a wire saw. As the employee used a crowbar to get the wire out of the block, the piece of stone that was being cut broke in the middle, fell at an angle, and rotated down. It struck the employee's right foot, causing amputations to the second and third toes.",0
"An employee was moving metal materials by hand. One of the employee's fingers was caught between two pieces of metal, and the fingertip was amputated.",1
"On July 29, 2021, an employee working in a hot process area began to feel nauseous and was later hospitalized for heat stress.",1
"At 3:00 p.m. on July 29, 2021, an employee developed heat-related illness while driving a package delivery car. The illness caused the employee to get into an accident, and the employee was hospitalized.",1
"An employee opened double doors leading to a mechanical room on a mezzanine. The safety bar in front of the door broke and the employee fell to the floor about 12 feet below. The employee suffered fractures to the collarbones, ribs, and back.",1
"An employee was near a production machine when it sprayed hot plastic onto the employee, causing burns to the left arm, face, and chest.",1
An employee was removing the back gate of a flat bed truck fitted with a removeable fence. The employee fell from the loading dock less than 4 feet to the ground. The employee later collapsed in the parking lot when trying to leave for the day and was hospitalized.,1
"A border patrol agent was hiking down a hill in pursuit of someone. The agent stepped into a hole and fell downhill, stopping about 20 feet below. The agent suffered a broken left tibia and fibula and was hospitalized, requiring surgery.",1
"On July 29, 2021, after finishing his shift at about 5:00 p.m., a mail carrier was hospitalized for heat-related illness.",1
"An employee was building parts at a frame square work area when their right little finger got caught in a pinch point of the crossover track conveyor as they released a lever, resulting in a fracture.",1
An employee was walking down a paved road when they fell and landed on their right arm/elbow.,1
"An employee was exiting his truck when he was struck by a vehicle, resulting in a fractured left leg.",1
"An employee was using a pressure washer to clean the inside of a fertilizer tank containing ammonium polyphosphate solution when the pressurized steam punctured his left big toe, resulting in infection and hospitalization.",1
"An employee was using a press brake to bend parts in four sequences. The brake activated and caught the employee's left hand, amputating half of the last joint of the ring finger and also lacerating/splitting the middle finger.",0
"An employee who had been performing walkthrough inspections and cleaning drain filters began to experience nausea and cramps due to heat and dehydration, resulting in hospitalization.",1
"While leaving work, an employee tripped on a rug and fell resulting in a fractured left femur.",1
"An employee was disconnecting a wash line. While in a squatting position, the employee was using a rubber hammer to tighten a clamp and sustained a back injury.",1
An employee developed heat-related illness at a prequalification camp.,1
An employee was operating an electric pallet jack. Another jack struck the one the employee was driving and the employee's foot was caught between the two jacks. The employee suffered a broken ankle.,1
An employee was at a site where a communications tower was being installed. The employee was tying rebar when he became ill and then fainted due to a heat-related illness.,1
"An employee was plugging in a floor scrubber for charging when he tripped over the cord and fell to the ground, resulting in injuries to his left ear and hip.",1
"An employee was walking near a pile driver to grab some chains when a metal pile pocket sitting on top of a template fell after being hit by the pile lead. The pile pocket bounced and hit the employee on his lower body, resulting in multiple fractures on both legs below the knee/shin area.",1
An employee was loading pallets of merchandise inside a parked trailer using a forklift. An operator attached his mule to the parked trailer and drove about 10 to 15 feet from the bay deck at the same time as the forklift operator was placing a pallet of merchandise inside the trailer. The employee and the forklift fell to the ground and the employee was hospitalized for a back strain.,1
"An employee was on their knees with their upper body in a car while attempting to connect scanning equipment to an engine control module. The car went into drive and lurched forward. The driver's door struck a post and pinned the employee between the door and doorframe, resulting in a broken pelvis.",1
"An employee was walking toward a house to deliver three boxes when she tripped on a bump in the concrete and landed on her right hand, resulting in three broken fingers.",1
"An employee was installing a pipe through a wall. The employee's hand was caught against a metal wall beam, resulting in the amputation of his fingertip.",0
"On 7/29/2021, an employee was putting on her boots while using the door to support herself. The door closed and her right little finger was caught between the door and the doorjamb, resulting in an amputation just below the nailbed.",0
"On July 30, 2021, at approximately 12:35 p.m., an employee was working at a 90-ton hydraulic brake press to bend door parts. The press cycled and the employee's left forearm and right hand were caught in the pinch point between both dies. The employee's left forearm was crushed and his right palm was fractured. He was hospitalized for surgery.",1
"An employee became dizzy while standing on a ladder, working on a communication line. The employee was hospitalized, suffering from heat exhaustion.",1
An employee was moving a 30-pound work piece when its sharp edge caught the tip of the employee's little finger. The fingertip was amputated.,0
"An employee suffered injuries to the left shoulder, neck, and back while lifting a child. She was hospitalized.",1
"An employee was climbing up on the back of his truck to shut the back door when he slipped and fell to the pavement, resulting in a fractured left arm that required hospitalization.",1
An employee was installing siding from a 6- to 7-foot ladder. The ladder slid along the siding and the employee fell. He landed on the ground and suffered broken ribs and a collapsed lung.,1
"An employee was operating a forklift to take bins to the warehouse for storage when the forklift overturned on his legs, resulting in fractures to both legs.",1
"On July 30, 2021, at 6:00 p.m., an employee was removing a hose and the stainless steel hardline for a positive displacement pump when their left middle finger caught on a blade in the pump, resulting in amputation of the fingertip.",0
"An employee had been flipping a 50-pound bag over. The employee's glove got caught on a chain conveyor, pulling his hand and wrist into the conveyor. The employee sustained soft tissue damage to the hand and wrist/forearm.",1
"An employee was unloading food products for a customer when they began feeling lightheaded and disoriented, resulting in hospitalization for dehydration.",1
"An employee was placing a barricade around a work area with an active hot water discharge that created steam and standing water. The employee stepped into a depression containing hot water, resulting in second degree burns to their foot.",1
"An employee was on a 6-foot ladder while removing debris from a ceiling. A piece of cement fell from the ceiling and the employee lost his balance and fell off the ladder, resulting in broken ribs and an injured wrist.",1
"An employee was working at a wrapper on a recoiler, wrapping a coil with plastic. A pigtail became caught on a pipe; while an employee was pushing it back into a working position, the machine engaged and its rotating bearing hit the employee's left hand. The employee suffered partial amputations to the middle and ring fingers. The machine was unguarded at the time.",0
"Employees were working on a fence machine stacker. When it was activated, an employee was pinned between a lifting mechanism and the machine's lid, suffering a crushing injury across the chest.",1
"An employee was unpacking merchandise and placing it on a shelf when she received a cut on her finger and then fainted, resulting in a contusion and chipped teeth.",1
"An employee was making a connection when a swivel bounced back and caught his right middle finger between the swivel and the stump, resulting in a partial fingertip amputation.",0
"An employee walked under an aerial lift as a piece of sheet piling was being cut. The piece fell approximately 20 feet and struck his hard hat and neck, resulting in a neck laceration.",1
"An employee was operating a forklift when their right index and middle fingers were caught between the frame of the forklift and a guardrail, resulting in fingertip amputations.",0
"An employee was repairing an elevator door and fell from the top of the elevator cab to the bottom of the elevator shaft. The employee sustained broken arms, collapsed lungs, a head injury, a chest injury, a stomach injury, an abdominal injury, and blood clots.",1
"On 7/30/2021, an employee was stocking products on a top shelf when they fell off a step stool and landed on the floor, resulting in a right hip fracture that required hospitalization and surgery.",1
"An employee was on a straight ladder gathering equipment to be used at a jobsite. When they began descending the ladder, they fell 8 feet from the ladder to the ground below, resulting in fractured wrists, a fractured cheekbone, and a laceration on their hand.",1
An employee was attaching communications cable to tensioned strand wire using a lashing device from the ground and alternating work tasks to include working from a bucket truck. The employee began to display signs of heat exhaustion and was hospitalized.,1
"An employee was working near an assembly line when a vehicle struck a wheel hub that subsequently struck the employee, resulting in a puncture on their right calf.",1
"On July 30, 2021, at 12:15 p.m., an employee was inflating a farm tire to the required 30 psi while it was in a tire cage. The tire pressure rose to approximately 20 psi when the tire exploded and the force of the explosion shifted the cage. A portion of the tire struck the employee in the legs as the cage moved, resulting in a fractured right tibia and a ruptured tendon in the left leg. The employee was hospitalized.",1
An employee was using a hammer to attach a cross-arm on a form. The hammer handle hit the tip of his little finger and fractured it.,1
An employee worked an entire shift and sustained heat stroke.,1
An employee was working the suppression operation lines while fighting a wildfire on rugged terrain when they experienced possible heat stress and dehydration and lost consciousness.,1
"An employee was lying on a concrete slab immediately next to an unloader. The unloader had been raised on a hydraulic jack so the employee could make a shim adjustment to it. When the employee lowered the unloader after making the adjustment, it fell and struck the employee, who suffered a 10-inch horizontal laceration to the chest; the amputation of three fingers on the left hand; a cut to the left side of the head; cuts on the upper right arm; and bruises to the back, left hip, and right shoulder.",0
An employee was taking a break after sucking insulation out of an attic using machines. The employee began cramping and was hospitalized for possible heat exhaustion.,1
"An employee's gloved hand came in contact with a rotating extension on a right angle DC torque tool. The glove got caught in the tool's extension, causing the employee's left index finger to get wrapped in the extension. The fingertip was amputated.",0
"An employee was cleaning a portable belt conveyor when their right hand contacted the power end of the belt conveyor, which crushed the employee's hand.",1
"An employee climbed up the side of a product rack to retrieve a case of product from the second tier when they fell and landed on their stomach, resulting in a fractured maxillary face bone, a displaced nasal bone, and a fractured left and right arm.",1
"An employee was feeding paper into a folder mechanism on a press and adjusting the tension in preparation for the evening press run. The employee's left little finger got caught in the rollers. As the employee attempted to pull their left hand out, their right hand was caught in the roller resulting in an amputation injury.",1
"On July 31, 2021, an employee was performing a sea lion puppet show when a sea lion bit their thigh, resulting in hospitalization.",1
"An employee was on the tarmac on a deck loader when they began to feel faint, dizzy, and incoherent, resulting in hospitalization for a heat-related illness.",1
"An employee was disposing of materials in an outside trash receptacle. The employee fell from the side of the receptacle to the ground about 3 to 4 feet below, landing on his shoulder.",1
"An employee was trying to stop a car that had started rolling. She fell out of the car, which ran over her left calf and ruptured an artery, leading to an internal hemorrhage. She was hospitalized.",1
"An employee was carrying a bundle of insulation when he tripped over the corner of a pallet, fell backward, and hit his head on the fork of a forklift, resulting in a concussion.",1
"An employee was using an extension ladder while on a barge when they fell approximately 12 feet, resulting in a left ankle injury and a right ankle fracture that required surgery.",1
"An employee was swinging a hammer while on a 6-foot step ladder when they fell to the floor, resulting in a broken collar bone.",1
"On July 31, 2021, at 11:30 a.m., an employee was cutting a piece of concrete pipe with a portable cut-off saw when the saw got bound after the pipe pinched it. The employee lost his grip and the saw flipped over and bounced up to the left side of his neck, resulting in a laceration.",1
"An employee accessed an electrical panel to switch a breaker when they received a 480-volt electrical shock that went from their right hand to their left hand, resulting in hospitalization.",1
"A nurse was sitting at a nurse's station. A patient struck the nurse on the head with a fire extinguisher, knocking the nurse unconscious.",1
"An employee was leaving a building through a roll-up door. After she lifted it to go out, the bracket on the wall that held the spring for the door broke. The door came down on her leg and fractured it. She was hospitalized and required surgery.",1
"An employee was unclogging a line when lithium nickel oxide entered his gloves, causing a burn. He was hospitalized.",1
An employee was inspecting the middle lane of a lane closure when a car struck him. He fell to the pavement and suffered a head laceration.,1
"An employee tripped on a cart and fell to the floor, landing on her knees and suffered a fracture to the right knee.",1
"A crew was loading material into the bed of a boom truck with a tag line on one end. An employee was steadying a bundle of I-beams as they were being hoisted onto a boom truck. The load shifted and pinched his right middle finger, resulting in an amputation.",1
"An employee was surveying a rural property along the fence line when they were struck by a driver who left the roadway, resulting in a broken right arm, a damaged artery in the right arm, a fractured C1 vertebrae, a broken left ankle, and possible nerve damage to the right arm. The employee required hospitalization.",1
"At about 2:00 p.m. on August 2, 2021, an employee was making batches of popcorn when the kernel dispensing tube cap came off. The employee was putting a lid/cap on the tube system when the auger (spiral rod) grabbed his lab coat and pulled him in. The auger penetrated the employee's chest and exited his back. He was hospitalized.",1
"An employee was using a powered miter saw to cut down a 10-foot trim piece. The employee's left hand and left index finger came into contact with the saw's rotating blade, which amputated the index fingertip.",0
An employee's finger was caught between the paddle and the drum of a mortar mixer. The finger was partially amputated.,0
An employee was removing bricks from a conveyor belt. The employee's middle finger was pinched in the belt and crushed.,1
An employee was repairing a natural gas line leak on an extreme heat day (which entailed using a hand shovel to dig two 19- to 20-inch holes in packed soil: one hole to expose the gas line to stop the flow of gas and one to make the repair). The employee had a heart attack and was hospitalized.,1
"On 8/02/2021 at 3:00 p.m., an employee jumped to the ground from the bed of a flatbed truck and suffered a broken ankle that required surgery.",1
"An employee was transporting product to a delivery truck using a manual rack and a ramp. The truck moved forward and the employee lost his balance and fell 5 feet to the ground, resulting in injuries to both wrists, including a right wrist injury that required surgery.",1
An employee was operating a recoiler when his left hand became entangled with the metal strip being wound up on the recoiler. He suffered a hand/wrist injury.,1
An employee developed heat exhaustion/dehydration while making food deliveries. The employee was hospitalized.,1
An employee was backing a forklift out of a racking storage area. The employee's left arm was caught between the forklift's overhead cage and the racking system. The forearm was broken.,1
An employee was struck by a forklift as he walked away from a trailer. He suffered a broken leg.,1
"An employee was lowering a vehicle's lift gate. A spring broke and the gate crashed down on the employee's feet, amputating both big toes.",1
An employee tripped on a curb and injured his back.,1
"An employee was cutting a piece of aluminum trim with a miter saw. The saw grabbed the piece of metal, and the employee's left little finger was caught between the table of the saw and the piece of metal. The finger was partially amputated.",0
"An employee had cleaned a vacuum belt dryer feed tank with steam-heated water, which he then drained out of the tank through the outlet valve at the bottom. When he disconnected the nitrogen supply line on the upper part of the tank, hot water sprayed from the flange for that line and struck the employee. He suffered second-degree burns to his neck, chest, back, legs, and arms, covering about 30 percent of his body. He was hospitalized.",1
An employee was removing a coil from a winding machine. The employee's little finger was pinched between the cylinder and the machine. The very tip of the finger was fractured. Part of the fingernail was damaged and tissue beside the fingernail was removed.,1
"An employee was cutting heating element wire. The employee was adjusting the cutting blade when the piston arm activated and their finger was pinched in the machine, causing a laceration and a broken finger. The employee was hospitalized.",1
An employee was lifting a large ring using a crowbar. The tool slipped and the ring came down on the employee's finger. The fingertip was amputated above the first knuckle.,1
"An employee was performing maintenance while on a ladder when they fell approximately 5 feet to the ground, resulting in a fractured wrist.",1
"An employee was leaning between two stacks of lumber to place a strap on one of the stacks. The strapper pulled the stacks together, and the employee was caught between them. The employee suffered a fractured sternum.",1
"An employee was on a platform hanging a 4-inch piece of cast iron pipe. He fell through a ladder access hole and landed on the floor about 8 feet below, suffering a head injury (with a concussion) and a sore shoulder.",1
"An employee was on their hands and knees going through a pallet of products. A forklift backed into the employee, who suffered a broken foot.",1
An employee had an allergic reaction to the apron they wore. The employee developed a neck rash and was hospitalized.,1
An employee was standing near a forklift. Six pieces of shaft wall fell off the forklift and landed on the employee's leg. The employee suffered a broken tibia and ankle.,1
"An employee was carrying a pan of hot water. It fell, causing second-degree burns to his torso.",1
"An employee was helping a child off a bus. The child ran away, pulling on the employee and causing her to fall to the ground. She suffered broken ribs and was hospitalized.",1
"An employee was cutting meat with a bandsaw when the machine got stuck. As he was turning off the machine, the blade amputated his left thumb at the first knuckle.",0
An employee was driving an electric riding pallet jack. His left foot slipped off the jack and was crushed between it and metal racking. His left tibia was broken.,1
"An employee was cutting a piece of steel with a torch. About 40 feet away, an excavator with a grapple attachment was pulling apart two other pieces of steel that were connected with bolts. When those two pieces were pulled apart, the bolts broke and one of the pieces flew out the side of the grapple. It struck the employee in the hand and right leg, causing hand fractures and lacerations and a broken femur. The employee was hospitalized.",1
"An employee was cutting lumber with a circular saw when the saw contacted their left index finger, resulting in a fingertip amputation.",0
"An employee was taking a dog out of its harness, helped by the dog's owner. The dog lunged over and bit the employee, causing an injury to the left eye that required surgery.",1
"An employee was measuring a piece of granite with a tape measure. The granite tipped and fell onto him, breaking his leg.",1
"An employee was trying to unjam an injection mold machine. The outer door to the machine was closed, causing the mold to actuate and catch the employee's left arm. The employee was hospitalized and the arm was medically amputated.",1
"An employee was water blasting when the water stream struck the employee in the left ribs, bicep, and wrist, resulting in water under the skin that required hospitalization and surgery.",1
An employee was operating a stand-up forklift in a warehouse. He backed into a parked forklift and suffered an injury to his right leg.,1
"An employee was under a vacuum truck checking a driveshaft installation. The truck rolled over him, crushing his pelvis and breaking ribs.",1
"An employee was string-trimming around a ground cover. Hornets, coming from a nest in the ground cover, stung the employee multiple times. The employee was hospitalized.",1
"An employee was walking through a door and starting to walk through another door when she slipped on a wet floor and fell, resulting in a broken left femur.",1
An employee fell from a step ladder while installing a grill on a refrigerator. The employee landed on the ground about 18 inches below and suffered a broken hip.,1
"An employee slipped while leaving the cab of a tractor-trailer, falling backward to the ground and suffering a broken elbow.",1
"An employee was shackling beef when his right little finger got caught between the chain of the shackle and the metal tension bar, resulting in a fingertip amputation.",1
"An employee was cleaning machinery when it caught her glove, resulting in the amputation of her right forearm.",0
A stand-up order picker backed into an employee who was picking up cases of liquor. The employee's left ankle was pinned between a pallet on the picker and one on the ground. The ankle was broken.,1
"At about 7:00 p.m. on August 3, 2021, an employee was removing laser-cut parts from a sheet of steel that was positioned on a conveyor belt. A magnetic hoist was being used to lift a part from the sheet when the magnet momentarily lifted the metal conveyor belt from the frame of the conveyor. The employee's hand was resting on the conveyor frame, and when the conveyor belt separated from the magnet it fell onto the employee's hand, partially amputating a finger.",0
"An employee was using a meat bandsaw. The saw cut the employee's fingertip, resulting in an amputation.",1
"An employee was in his vehicle, getting ready to do firearms qualification, when his gun fired into his left leg.",1
"An employee was reading gas meters when a ram attacked him. The ram struck his lower left leg from behind, resulting in a fractured tibia that required hospitalization and surgery.",1
"An employee was placing stacks of totes on a wood pallet. The totes fell over on the employee, who suffered a broken pelvis and was hospitalized for surgery.",1
"The injured employee was part of a team that was holding an agitated patient to assist with medication administration. The patient was attempting to bite, kick, scratch and spit throughout the event. It is not known how the employee was injured, but he reported dizziness, headache, nausea, and abdominal pain. He was hospitalized after experiencing multiple seizures.",1
"An employee was doing preventive maintenance on a mold on a work table. One of the pin actuators on the mold was not functioning properly. The employee was using a handheld air hose with a rubber nozzle tip attachment to actuate the pin in and out. The pin would actuate in but not out; while the employee was trying to manually slide the pin, the air hose attachment activated. The pin caught the employee's left middle finger, partially amputating it.",0
A front end loader's bucket was rotated while an employee's hand was on it. The employee suffered a laceration to the little finger.,1
"An employee was installing or checking ridge vents on a metal rooftop. The employee fell to the ground about 30 feet below and suffered chipped vertebrae, a collarbone injury, an internal abdominal injury that required surgery, and a sprain or fracture to the wrist.",1
"An employee was operating a machining mill. While loading a new piece of material into the machine, the employee brushed off metal shavings from the top of the machine and their left hand was caught between the piece of material and tailstock of the machine. Their left middle and index fingers were crushed and the middle finger required surgical amputation.",1
"An employee was stepping over a residential gate when they tripped, resulting in a broken left hip.",1
"An employee was operating a forklift. The employee's foot was wedged between the forklift and racking, causing an ankle injury.",1
"An employee was performing maintenance on a generator and fell from a 10-foot ladder to the concrete floor, striking his head and suffering a fractured skull, pelvis, ribs, and vertebrae, as well as a possible broken arm. The employee was hospitalized.",1
An employee was operating a brake press. The press activated and amputated the employee's right ring fingertip at the first joint.,0
"An employee was doing punch-out repair work on a metal roof. The employee fell from the roof to the ground, suffering a back injury.",1
"An employee was cleaning a residential gutter from an A-frame ladder, 6 to 7 feet above the ground. The employee fell to the ground and suffered two fractures in the lower back and a broken right ankle.",1
"An employee was flushing a tank. The handle slipped out of her hand and hit the left side of her face, breaking her cheekbone and lacerating her cheek.",1
"An employee was trying to clear a jam in a machine. The machine's rollers caught his right hand and crushed the tip of his little finger, causing a partial amputation.",0
An employee was adjusting a reroller machine. The employee's right forearm was pulled into the dies and fractured. The machine was not guarded at the time.,1
"An employee was clearing metal strips that were stuck in a machine. The tip of his left ring finger was pinched in the machine, causing a partial fingertip amputation without bone loss.",0
"An employee was using a company bicycle to travel to a company property when they were struck by a vehicle that was backing out of a driveway, resulting in a fractured leg.",1
"An employee was filling a propane cylinder at a residence when a propane explosion occurred, resulting in burns to their wrist and head.",1
An employee was preparing a new lift to receive an engine. His right pinky finger was pinched and he sustained a loss of soft tissue.,0
An employee was cutting vinyl siding with a circular saw. The saw kicked back and lacerated the employee's left little finger.,1
An employee was operating a dozer in an open field. The dozer's blade got caught at a drainage ditch and the dozer stopped suddenly. The employee was thrown from the seat to the floor of the cab and suffered a spinal injury. He was hospitalized.,1
"An employee slipped on a wet floor, fell, and broke her left kneecap.",1
"An employee was emptying a half-full wheelbarrow of concrete when the wheelbarrow tipped over. The employee tried to stabilize the wheelbarrow and their left knee buckled, resulting in a dislocated left knee.",1
"An employee was stepping down a ladder when he fell approximately 3.5 feet to the shop floor, resulting in a right wrist fracture and left patellar tendon rupture.",1
An employee was using a forklift when one of its forks punched a chemical tote containing benzene chloride. The employee suffered a chemical burn.,1
"An employee was mowing grass with a push mower. The employee was ""bumping"" the mower so it wouldn't get clogged when the mower contacted their left foot, resulting in a partial amputation of the middle toe.",0
"An employee was using a hammer to strike a steel wedge. A piece of the hammer broke off and struck the employee's left index finger, causing a laceration that required surgery.",1
"On August 4, 2021, at 7:30 a.m., an employee was clearing excess cheese from a grinder when the grinder blades contacted the employee's right thumb, resulting in amputation of the thumb tip.",1
An employee was disassembling a bushing on a hydraulic cylinder. The bushing fell on a finger on the employee's left hand; the fingertip was medically amputated.,0
"An employee was passing though an area where a drum washout was occurring. Hot water splashed onto the employee, burning his left heel.",1
"An employee was welding studs on a bridge deck. During the welding process, a flash occurred causing the employee to fall backward onto the bridge deck. The employee was hospitalized with bruises and contusions.",1
"An employee was drilling holes in a piece of pipe with a horizontal drill when a piece of metal that had sheared off caught his glove and pulled his hand into the drill, resulting in a partial amputation of the left thumb.",0
An employee was replacing a roll of wrapping for a packaging machine. A box entered the machine and tripped the carrier/sealer; the machine caught the employee's finger and amputated the fingertip.,0
"At 9:30 a.m. on August 4, 2021, a two-person crew was trimming branches on a 36-foot locust tree using an elevator lift truck. An employee was in the elevated bucket of the boom truck using a stick saw. While he was lowering the boom to clear some hangers, the walking pin to the hydraulic cylinder failed. The upper boom and bucket fell about 7.9 feet, coming to rest on the top of the cab protection rack. The employee suffered a head laceration and was hospitalized.",1
"An employee was working inside an enclosed generator when they stepped on a two-step A-frame ladder in order to get down. The ladder broke as soon as the employee stepped on it, causing the employee to fall approximately 2.5 feet onto the concrete and resulting in a lower left leg fracture.",1
"An employee was cleaning a slitter machine when their hand got caught in the machine, resulting in lacerations and amputations to their right hand.",1
An employee was clearing a jammed machine. The machine activated and the employee's left index fingertip was caught in its cutting knives compartment. The fingertip was amputated.,1
An employee was grinding beef with a mixing machine when their left middle finger was caught between the lip and the stand of the mixer. The finger was amputated.,0
"On August 5, 2021, an employee was checking an injection molding machine when they were shocked by a live wire in the machine's electrical cabinet. The employee was hospitalized.",1
"An employee was unhitching a tool bar when their left little finger became caught between the tow and the trailer hitch, resulting in amputation.",1
"An employee was moving a bundle of solid brass rods with an overhead crane. After being set on the floor, the bundle separated; rods rolled onto the employee's feet, crushing them.",1
"An employee was on a trailer, unstrapping a load of metal sheets for roofing. The employee fell from the trailer to the ground and broke a rib.",1
"The injured employee was working on an open-top coal car replacing a piece that supports the sides of the car. The injured employee and a co-worker each had a side of the support. As the co-worker unbolted his side, he lost his grip, and the support swung down on the side of the injured employee, amputating their right ring fingertip.",1
"An employee was using a ladder to perform an estimation in a cellar when the ladder slipped and the employee fell 10 feet, resulting in a fractured rib, a head contusion, and a lumbar spine injury.",1
"An employee was opening a truck door with his left hand to get inside a truck when a vehicle pulled up alongside the truck and struck the truck's door, which subsequently struck the employee's hand, resulting in lacerations that required hospitalization and surgery.",1
"An employee was cutting a tube with a band saw when his glove got caught in the blade and his index finger contacted the saw, resulting in a fingertip amputation from the bottom of the nail.",1
An employee fell and suffered a fractured right femur.,1
An employee's clothing was caught in a sprocket for a conveyor and was pulled in. The employee suffered broken knee.,1
"An employee was exiting a room when her right little finger was caught in the door jamb on the hinge side of the door. The door pinched her finger, causing a partial amputation.",0
"An employee was walking on a loading dock when they slipped and fell to the bottom of the dock, resulting in possible head injuries.",1
"An employee was ripping plywood across a table saw. The saw blade cut the employee, resulting in the amputation of the employee's left middle and ring fingers.",1
"An employee was walking near a conveyor. Her toe was caught on a support pole for the conveyor and she fell to the concrete floor, suffering a broken hip.",1
An employee was transporting a coil of steel when the banding let loose and the tail of the coil struck the employee in the head.,1
"On August 5, 2021, an employee was operating a crane by remote control to move bundles of steel bars for packaging. A bar from one of the bundles came loose and the employee's right hand was caught between the bar and the remote control, resulting in a partial amputation of the middle finger.",0
An employee was working on a slitter machine when the rubbers on its arbor caught his right hand and pulled his arm through the slitter head. The employee's right hand and arm were crushed.,1
"An employee was moving an aerial lift over a gantry crane track using an overhead crane. The employee was standing between a 74-inch steel pipe and the boom of the aerial lift when the final wheel of the lift cleared the gantry track and the boom swung over and pushed the employee into the pipe, resulting in fractured ribs and contusions on the left lung.",1
"An employee was using a horizontal drill when a coolant hose became wrapped around the drill, broke free, and struck the employee multiple times, resulting in multiple fractures and lacerations to the right wrist and right shin.",1
"An employee was performing a run check of a machine when a finger on their right hand got caught between the belt chain and sprocket, resulting in a fingertip amputation. The machine was not locked out at the time of the incident.",0
An employee was caulking a balcony window and fell approximately 3 feet off a ladder onto the balcony floor. The employee suffered a knee fracture and displacement.,1
"An employee was working on a cheek plate line making bowling pins. The employee tried to grab a falling bowling pin when a moving chain contacted their left hand, resulting in amputation of the ring finger down to the first knuckle.",0
An employee was fixing a board that had flipped over on a conveyor. A pusher cylinder came forward and caught the tip of a finger on the employee's right hand. The fingertip was amputated.,0
"An employee was clearing a jam from a bag cutting machine when the blade amputated the tips of their right thumb, index, and middle fingers.",1
An employee was readjusting a piece of metal to be sheared. The employee's finger was crushed in the metal shear.,1
"An employee was using a pallet jack to load and unload palletized freight from a delivery truck at an offsite location. The employee fell while inside the delivery truck and tried to grab the strap of the truck's sliding door. The door came down on the employee's hand as he fell, resulting in fractures to the fingers/hand.",1
"An employee was operating a stand-up forklift when its steering tire got stuck in a hole in the concrete dock. Another forklift was being used to push the employee's lift when its fork entered the employee's cab and broke his left foot. He was hospitalized, requiring surgery.",1
"An employee was working on a roof when they fell to the concrete below, resulting in a fractured heel bone.",1
"An employee was using a pry bar to reshape a metal auto rail. The tool came loose and struck the employee's nose, causing a laceration. The long edge of the pry bar struck and ruptured the employee's left eye.",1
An employee was inspecting a garbage truck when he slipped and fell to the floor. The employee sustained a fractured hip.,1
"On August 8, 2021, at 1:00 p.m., an employee was struck by the bucket of a backhoe that was digging a pit for a trench box, resulting in a severe hand injury.",1
"An employee was climbing a tree to trim branches from it. A rope that had been secured to a branch broke and the employee fell approximately 20 feet to the ground below. The employee suffered spinal fractures, a lost tooth, and kidney lacerations.",1
"An employee was removing masks from the conveyor. A mask was stuck in the main conveyor and as the employee attempted to remove the mask, her finger was caught in the sprocket pinch point and amputated.",0
An employee was operating a ride-on fertilizer spreader on a slight slope. The spreader hit a small rabbit hole and seemed like it was about to tip over. The employee's right leg was broken as he stuck his foot out to brace himself.,1
"An employee was disconnecting a rope from a barge. The employee's middle, ring, and little fingers were crushed between two barges. The employee was hospitalized.",1
An employee was lifting a fabricated product with a lifting magnet. The product fell off the magnet onto his left foot and fractured it. He was hospitalized.,1
"An employee was operating a forklift when her left leg was caught between it and another, empty lift. Her leg was lacerated.",1
"An employee was draining down and isolating piping. While he was trying to remove debris from a 1-inch vent valve, liquid started to gurgle up into the valve. He closed the valve with his right hand to prevent a release, and it closed on his left index finger. He suffered a partial amputation to the finger.",0
An employee was trying to adjust the pressure rod and tension ball of a slitter machine. The slitter blade amputated the employee's left index finger. The employee was hospitalized and had surgery.,1
"An employee was moving a chain on a laser CNC machine. When he pulled the chain toward the sprocket, his left ring finger was caught in the nip point of the chain/socket assembly. He suffered a partial amputation to the fingertip.",0
The injured employee had been putting away tools when they were attacked with a hammer by another employee. The injured employee sustained a skull fracture.,1
An employee was backing up a motorized pallet jack. The employee's hand was caught and crushed between the jack and a bailer.,1
"An employee was standing on an elevated platform while spraying foaming sanitizing chemicals onto equipment when he fell 4 feet to the concrete floor below, resulting in multiple lower left leg fractures.",1
"An employee was staging pallets in front of a door using an electric pallet jack. The employee backed up and the pallet jack slid back into the door and became stuck. The employee then stepped down from the pallet jack to try to move it when it reversed and the platform caught the employee's right ankle against the concrete of the dock pit, resulting in an ankle fracture.",1
"An employee fell down four steps and suffered broken bones in his left leg, right heel, and right ankle.",1
"An employee was replacing a handrail at the rear of a ready-mix concrete truck. He fell from the truck, suffering a broken left ankle that required surgery.",1
"An employee tripped and fell on sidewalk steps while walking from her vehicle to a building. Her knee, elbow, and forehead hit the concrete sidewalk. She was hospitalized due to a possible brain bleed.",1
"An employee was stepping off a ladder onto a porch roof. The employee fell backward off the roof to the ground about 10-12 feet below, suffering a broken back, fractured ribs, and a fractured skull.",1
"An employee was on a ladder when a mid-span clamp attachment broke, causing the tension of the fiber optic cable to waver. This caused the employee to bounce around, then fall from the ladder to the ground. The employee suffered a broken leg.",1
"An employee was stepping off the side of a truck cab which is about 30 inches above the ground. He fell and the back of his head struck a 2-foot high retaining wall. The employee lost consciousness. He was hospitalized with a skull fracture, concussion, amnesia, and a gash that required sutures.",1
"An employee was standing alongside a slip, with a mooring line next to the cleat, attempting to catch/slow down a barge and tie it up. The mooring line grabbed the employee's right heel and pulled it into the cleat, causing compound fractures to the right tibia and fibula and severe ankle lacerations.",1
"An employee was entering the rear of a delivery vehicle when he fell to the ground on his right side, resulting in an injury to his right leg and hip.",1
"An employee was adjusting equipment to ensure it was chained off correctly when the door of an unpressurized boiler fell off and struck the employee, resulting in a laceration to their neck.",1
An employee was using a chipper when it clogged with brush. The employee lifted the cover off the flywheel to clear the jam. The flywheel struck the cover and knocked it off its hinges. The cover then struck the employee in the head causing a concussion and facial lacerations.,1
"An employee was trimming excess material from plastic using a knife. The knife slipped and cut through his protective apron, lacerating his abdomen.",1
"At about 12:45 a.m. on August 6, 2021, an employee was trying to dislodge paper stuck inside a rotating valve on a bagger. The blade in the valve was activated, rotated, and amputated the employee's right index and middle fingers.",1
An employee was clearing an opening on a machine when the blade caused an avulsion of her right middle fingertip.,1
"At about 2:15 a.m. on August 7, 2021, an employee was troubleshooting an overheating issue on a 56-inch circular saw. The saw was turned off. The teeth of the still moving saw blade made contact with the employee's left index finger, resulting in a fingertip amputation. The employee was hospitalized.",1
"An employee was checking a roof to make sure it was covered and dried in before it started to rain. He slipped on the way to a ladder and fell off the roof, breaking bones in his leg.",1
"An employee was pulling and guiding a baggage cart. As he tried to attach the cart to a tug hitch, his fingertip was caught by the cart tongue and hitch. The fingertip was amputated.",0
"An employee was using a handheld grinder to grind bolts off of a water shut-off valve when the grinder kicked back and contacted his right hand and wrist, resulting in lacerations.",1
"An employee was stepping down off a front-end loader. He missed the last step and fell to the pavement, suffering a broken left hip. He was hospitalized.",1
"An employee was trying to help others on a roof when he fell from a ladder to the pavement below. He suffered a broken pelvis, two broken wrists, and a dislocated disk in his back.",1
"Three employees were installing a no-hub band over a 12-inch cast iron 90-degree elbow and a stub that went to a roof drain. The no-hub band broke during installation, and they descended in a lift to get a new one. The elbow fell down on one of the employees from about 20 feet above. It struck his head, which caused him to fall and hit his head on the toe board of the scissor lift. The employee sustained injuries to the head, neck/spine, and shoulder.",1
"An employee was climbing an extension ladder to get to a roof. The ladder slipped and the employee fell to the ground about 11 feet below, suffering a compound fracture to the right ankle.",1
An employee was operating a ride-on pallet jack when it collided with a metal storage rack. The employee suffered a broken right tibia and fibula.,1
"At about 11:30 a.m. on August 7, 2021, an employee opened an inspection door on a furnace hopper and was burned by heated ash exiting the door. The employee suffered burns to the back and shoulder.",1
"An employee was trying to align a dock plate with a truck. The plate collapsed, amputating the employee's finger.",1
"On August 8, 2021, an employee was using a hoist to move a 335-pound disk from a conveyor to a racking system. The disk fell from the hoist and hit the employee's left leg. He suffered a broken tibia and fibula and was hospitalized, undergoing surgery.",1
"An employee had climbed onto a machine platform and gotten down on his hands and knees to look for the cause of a defect in film that was running on a slitting machine. He slipped and his left hand went into the machine, where it was caught between a roller and a bar. He suffered broken tendons in the hand and wrist.",1
An employee was operating a double electric pallet jack and collided with another double electric pallet jack. The employee sustained injuries to the lower abdomen and right leg.,1
"An employee was working on and near a concrete spacer. A dump truck backed into the employee, breaking the employee's leg.",1
"An employee fell in a hallway, suffering a broken hip.",1
"An employee was moving a heavy piece of furniture when the furniture shifted and dropped onto the employee's leg, resulting in a broken leg.",1
A piece of sheet metal slipped from an employee's hand and cut the employee's right wrist.,1
"An employee fell off a 4-foot step ladder. His head hit a doorway during the fall, and he suffered skull fractures.",1
"An employee was in a tree, trying to attach a crane cable to it. When he reached for the crane cable, he was shocked, because the crane boom had come into contact with overhead power lines. He suffered burns to the left hand and left foot and lost consciousness for about 30 seconds.",1
"An employee was hitting a socket with a hammer to loosen it while a second employee monitored. The second employee grabbed the socket to keep it from falling to the ground and was struck by the hammer, suffering an amputation at the end of the left index finger.",0
An employee was cutting parts on a horizontal band saw when it amputated three fingers on his right hand. He was hospitalized.,1
"An employee was using a knife to score and separate two racks of ribs when the knife slid toward his hand, resulting in a cut and tendon damage.",1
An employee was exiting a tool truck when he slipped off the access stairs and fell out of the truck. His left foot was fractured.,1
A veterinary employee was bitten on the arm by a cat as she restrained it on an exam room table.,1
"An employee was with a group in a pasture, observing a herd of bison from a truck. Two bulls approached the group. One of them rammed the truck's tailgate, and the employee's leg was punctured and lacerated. The employee was hospitalized.",1
An employee was tending to a patient when she tripped and fell over the patient's alarm code device. She fell to the floor and suffered injuries to her right arm and femur.,1
"An employee was carrying two pieces of medical equipment out of a room. Her right foot caught on an object and she fell, landing on her left knee and breaking the kneecap.",1
An employee was responding to a chlorine leak and walked into a cloud of chlorine gas. The employee was hospitalized for pulmonary edema.,1
An employee was walking behind a walkie-rider powered industrial truck. It rolled over his foot and broke his ankle in two places.,1
An employee was operating a vertical milling machine when the machine caught the glove on her right hand. The glove became wrapped around the rotating bit resulting in amputation of her right middle finger.,1
"An employee was entering an area through an opening in a plastic curtain barricade. The employee's foot got caught on the bottom of the curtain and she fell to the concrete floor, breaking both wrists.",1
"An employee was under a mixer truck repairing its brake. The truck rolled forward over the employee's legs, both of which were broken.",1
"An employee was working with a machine that was filling small tubes with methyl ethyl ketone peroxide (MEKP). He pulled out the pickup tube and the chemical splashed on him, causing second-degree burns to his shoulder, chest, arm, and stomach. He was hospitalized.",1
Two employees were servicing a waste container located inside a shed. One of the employees received two bee stings on the head. The injured employee experienced an allergic reaction and a heart attack.,1
"In a reflex action, a shackled animal kicked an employee and its hoof amputated his left middle fingertip.",1
"An employee was cutting a tree into logs. He tripped on a log, then fell into another log and struck his head on it. He suffered a laceration to the left side of the head, by his eye.",1
"An employee was holding a tag line connected to a crane, which was being used to install a sign. The crane came into contact with a power line, and the employee was shocked. The employee was hospitalized.",1
"An employee was installing commercial-grade racking and was holding up a 15-foot section of racking. The racking began to fall and kicked out, pushing the employee to the concrete floor. The employee was hospitalized for a head injury.",1
"An employee was moving a hospital bed when it tilted. Her right middle finger was caught between the bed and the door, and she suffered an amputation to the fingertip.",0
"An employee was chaining down a load onto a flatbed trailer. He tripped on some equipment, fell onto the trailer, and rolled off onto the ground, suffering fractured vertebrae.",1
"At about 9:00 a.m. on August 9, 2021, an employee was running a wooden stile through a router when its blade lacerated her right middle finger. Part of the fingertip was surgically amputated.",0
"An employee was using a sledge hammer when his back began to spasm. Unable to walk, he was hospitalized, suffering from a back sprain.",1
"An employee fell 9 feet off a roof while swinging trusses, suffering a compound fracture to the ankle.",1
"During a rewiring operation, an employee was repositioning wire lying on the ground. The new wire contacted an energized phase and the employee suffered burns to the lower torso, left leg, and left foot. The employee was hospitalized.",1
An employee was walking on a roof when he lost his balance and fell 10 feet to the ground. He landed on his feet and fractured a lower disc in his back. He was hospitalized.,1
"An employee was weighing linen carts on a scale on a loading dock. She lost her footing while walking backward and fell to the concrete floor, landing on both hands and suffering fractures to both wrists and a lower spine injury. She was hospitalized, undergoing surgery.",1
An employee was installing a pipe in a pipe rack using a mobile crane. The pipe moved and crushed the employee's left index finger. The fingertip was amputated.,0
An employee was steadying a wall form as a tower crane lowered it. The employee's left middle finger was pinched between the ribbed area of the formwork and a clamp. The fingertip was amputated.,0
An employee hit his head on a gate while delivering mail. He suffered a head injury.,1
"An employee was moving a scissor lift through the paint line to change an air hoist. As the lift moved down the spur, a hook caught on it and pulled it over. The employee fell out of the lift, and a frame fell off the line and struck the employee. The employee suffered a broken right wrist and was hospitalized.",1
Employees were lifting a capstone with a chain hoist. The hoist shifted forward and caused the capstone to come into contact with an employee's leg. The employee suffered a broken fibula and a dislocated ankle.,1
"An employee was operating an excavator when it fell over the edge of a seepage bed excavation, landing 12 feet below. The employee suffered fractures to the left leg, as well as a forehead injury (from the excavator's cracked windshield) that required stitches.",1
An employee was working in a body shop and was hospitalized for heat exhaustion.,1
"On August 9, 2021, a temporary employee was waiting for a powered industrial truck that was carrying empty cages. The truck struck the employee's left leg, breaking it. He was hospitalized.

Duplicate of 1822689?",1
"A mail carrier became dizzy and lightheaded on his route. He was hospitalized, suffering from heat-related illness.",1
"An employee was driving a forklift towards the shipping travel aisle. He approached an intersection, then turned right and lost control of the forklift during the turn. The employee's left foot was pinned and fractured between the forklift and the base of a rack.",1
"An employee was walking across a scrap chute cover to get to the other side of a press. A locking mechanism on the cover failed and the employee fell 16 feet to the level below the press, suffering a head laceration and a possible back injury.",1
"An employee was walking down an internal stairway when she fell to the ground, dislocating her shoulder and breaking her leg in two places. She underwent surgery to the leg.",1
"An employee was positioning a punch holder that was being lifted by a crane. The crane moved, causing tension in its chain to amputate the employee's right index finger at the first knuckle.",0
"An employee slipped on water on a floor and fell, breaking her femur near the hip.",1
An employee's left hand was broken as the employee helped move a beam into place.,1
"An employee was descending a 4-foot ladder while holding a pneumatic nail gun when the gun triggered and a nail struck his right hip, resulting in hospitalization.",1
An employee slipped on a patch of gravel while hiking during a retreat. She fell to the ground and suffered a broken left femur.,1
"An employee was driving a dozer when it went over a 5-foot embankment. A grab bar over the controls struck the employee, who suffered a broken right-side cheekbone and a head contusion.",1
"On August 10, 2021, an employee became ill and left work. The employee lost consciousness at home and was hospitalized, suffering from dehydration.",1
"An employee was using a hammer to break a landscaping stone that was sitting on the forks of a forklift. The stone broke apart and hit the employee's right leg, causing a compound fracture of the fibula.",1
"A Trumpf Inc. employee was uncrating and unpacking a piece of equipment. As the employee used his pocket knife to cut off zip ties on the equipment, the knife slipped and the blade cut into his right forearm and hit an artery. He was hospitalized.",1
"On August 10, 2021, an employee was exiting a delivery van from the side door, carrying a small parcel, when he lost his footing. His left foot struck the ground and he suffered a broken ankle. He was hospitalized.",1
"An employee was adding a concrete chute to his mixer truck. The chute dropped onto his left index finger, causing an amputation.",0
"An employee was retrieving a load of water-based drilling mud with a vacuum truck. The employee slipped on the mud, fell, and struck his left side on the mud pump base. He suffered broken ribs on that side.",1
Two employees were fighting when one of them stabbed himself with a sharp blade. He was hospitalized.,1
An employee was grabbing a cartridge that had fallen when punches in an ejection cartridge capper came down. The employee's right little finger was amputated.,0
"An employee was pouring a sodium hydroxide solution into a wash tank. Some of the chemical splashed onto the employee's pants and into his boots, causing chemical burns.",1
"An employee was on a three-step rolling ladder cleaning a mold. The employee attempted to descend the ladder when he fell to the concrete floor, resulting in trauma and a laceration to the back of his head.",1
"Employees were chip sealing a road. Two employees were working from the ground, moving a pile of chips, when a dump truck struck one of them as it backed up. The employee suffered a broken leg and was hospitalized.",1
"An employee climbed a ladder to work on the boom of a crane. The employee was striking the boom with a pry bar when he fell off the ladder and struck the ladder on the way down, resulting in a skull fracture, ruptured ear drum, multiple rib fractures, and other scrapes and bruises.",1
An employee was erecting steel and fell 14 feet while he was changing activities and locations. The employee landed on a pile of angle steel and suffered four broken ribs.,1
An employee was reaching to clean an empty bag on an ice bagging machine. A moving chain drive caught his right glove and pulled his middle finger through a sprocket. The fingertip was amputated at the nailbed. The machine was unguarded at the time.,1
An employee was working to free a load of veneer that was hung up on a conveyor. The employee sustained an amputation when their finger was caught in the conveyor's drive chain.,0
An employee was engaging a dock leveler. A manual bar on the leveler slipped out and the employee fell from the dock to the concrete below. He suffered injuries to the head and right shoulder.,1
"An employee was removing a broken bag from a conveyor belt. The employee's left hand was pinched between a gravity roller and the powered belt and the employee suffered amputations to the little, ring, and middle fingers.",1
"An employee had just used a 35-pound electrical ground rod driver to install a ground rod. While lifting the ground rod driver above his shoulders, he lost his balance and fell onto the rod that had been driven into the ground. He suffered a neck laceration requiring five stitches and hospitalization.",1
"An employee was walking by sheets of drywall stored against the wall of a residential structure under construction. A gust of wind blew the sheets over and they struck the employee's left leg, lacerating and fracturing the upper leg and knee. The employee was hospitalized and underwent surgery.",1
"An employee was putting a bridge beam in place. When the beam struck the pier, the employee who was holding a 4 x 4 to cushion the beam was knocked off the pier and fell over 40 feet to the ground, resulting in two broken arms and a fractured back that left the employee paralyzed from the waist down. The employee's harness was not connected at the time.",1
"At 12:45 p.m. on August 10, 2021, an employee was driving an electric cart when his right leg struck a gate. He suffered lacerations and contusions to the leg.",1
An employee was walking across the parking lot to their car when they slipped and suffered a right ankle fracture that required surgery.,1
"An employee was working on a sprinkler pipe. He fell into a utility cavity, hitting piping and injuring his back and ribs.",1
"On August 11, 2021, a temporary employee was installing a factory-made screw in a 277/480-volt panel cover when it penetrated the insulation of a wire, causing an arc flash. The employee suffered a burn to the hand.",1
"An employee was performing sanitation duties on a conveyor line when his right arm was pulled into the chain and sprocket of the conveyor, resulting in a compound fracture to his right forearm.",1
"An employee stepped into the rear of a catering truck when the truck drove away from the loading dock and the employee fell backward out of the truck, resulting in a left arm and elbow dislocation.",1
An employee was cutting bagels with a bagel slicer. The slicer blade amputated the tip of his right ring finger.,0
An employee was inspecting a hot dog chain. She noticed a piece of hot dog hanging in a chamber. The employee's pinky fingertip was caught and amputated.,0
"An employee was operating a stud welder when their right index finger was struck by the welder as it cycled, resulting in a crushed fingertip that required hospitalization.",1
"On August 11, 2021, a temporary employee was washing pots and pans. While his right hand was in the sink containing dishwater, dish cleaning liquid spilled over the cuff of his glove and caused a chemical burn to his hand.",1
"An employee was standing on a 12-foot A-frame ladder, pushing manure in a dump truck bed with a shovel. The employee slipped and fell to the concrete ground, suffering a broken neck vertebra, two herniated neck vertebrae, and two fractures to the left arm.",1
"An employee went up to a catwalk between a semi trailer and a semi cab to diagnose an issue with an electric tarp failing to close. The spring loaded arm uncoupled and released, and the employee was thrown to the ground. The employee suffered fractures to an upper-back vertebra, ribs, a wrist, and a collarbone.",1
An employee was trying to clear film that had jammed on a bagging machine. The machine amputated the employee's right index fingertip.,0
"An employee was working on a steel component that was resting on a piece of wood cribbing, about 8 inches off the ground. The cribbing broke and the component fell onto the employee's feet, crushing both of them.",1
"On August 11, 2021, an employee was inspecting the tracking of a conveyor belt. The belt and pulley caught the employee's right index finger, causing a partial amputation.",0
"An employee was using a standup forklift to transport a tote of meat into a freezer. The forklift backed into a bollard and the employee fell to the cement ground, suffering a broken hip.",1
"A employee was closing a door. The door closed on a finger on the employee's right hand, and the fingertip was amputated.",1
"An employee was opening the hinged doors on the back of a truck when a cardboard drum fell and struck the employee in the head, resulting in two fractured vertebrae.",1
"An employee slipped and fell to the floor, suffering a broken right kneecap.",1
An employee was bending a small breaker plate on a press brake. His right thumb was caught between the bent flange of the part and the punch. Part of his right thumb above the knuckle was amputated.,0
"The injured employee was conducting maintenance at the plant and was at the reactor slurry line to open the valve to drain the slurry out so it did not solidify. Steam in the line was turned on from the control room. When the employee went to rod out the valve, the material broke loose due to the steam pressure and sprayed hot reactor slurry onto the employee. The slurry contained phosphoric acid and ammonia. The employee sustained chemical burns to both arms and was hospitalized.",1
"An employee fell from a ladder to a tile floor, suffering a head injury, a broken collarbone, and broken ribs. The employee also lost consciousness.",1
"An employee was moving a rack of clothes when it fell over. It landed on the employee, who suffered a broken pelvis and femur. The employee was hospitalized, requiring surgery.",1
"An employee was loading a metal part into a press brake. The employee was readjusting the part when the machine partially cycled. Her left middle finger was caught between the part and the die, and the fingertip was amputated.",0
An employee was packing dunnage to be shipped out when they began to experience a headache and body aches due to a heat-related muscle injury and dehydration.,1
An employee's right middle fingertip was amputated.,0
"An employee was working inside a bank at a drive-through. A car struck the building and drove through an exterior wall, causing bricks and a metal cabinet to fall onto the employee. The employee suffered injuries to a hip, the jaw, and a shoulder.",1
"An employee tripped while walking and fell to the floor, suffering a broken arm and leg.",1
"An employee tripped over an open cabinet door in a store, fell, and suffered a broken left femur.",1
An employee tripped on a concrete seam and suffered a spiral fracture to the left femur.,1
"An employee was washing dishes when he became weak, fell, and struck his head on a shelf.",1
"An employee was standing on the tongue of a trailer and slipped on the wet beam. Their right foot went between two of the beams while they fell to the side, resulting in a broken lower right leg.",1
"An employee was inspecting a rotary air lock valve when their right hand contacted the valve, resulting in fingertip amputations.",1
An employee was cutting a piece of poplar on a table saw. The rotating blade cut the employee's thumb. The employee was hospitalized.,1
A dock plate pinched an employee's finger as it was lowered. The employee suffered a fingertip amputation.,0
"An employee was using a cordless drill with a tap bit to widen an oblong opening for a specified bolt size when their left glove caught on the tap bit, resulting in a partial amputation of the thumb pad with no bone loss.",0
"On August 12, 2021, at 1:00 p.m., an employee was clocking in after a lunch break when he was struck by a manual dolly loaded with trays. The employee fell to the ground and suffered a fractured femur.",1
"An employee was climbing a tree with a rope and saddle when a knot tied to a carabiner slipped out and the employee fell approximately 16 feet to the ground, resulting in possible rib and vertebrae fractures.",1
"An employee was holding a tag line when their right little finger was entangled in the tag line, resulting in a fingertip amputation.",0
"An employee was operating a pallet jack when their right leg became pinned between a guardrail and the pallet jack, resulting in a broken lower leg.",1
"An employee was working in a lift truck bucket, rewiring a transformer service weatherhead. As he repositioned the bucket, his left hand was pinched between it and the weatherhead. His middle finger was caught and amputated.",0
An employee was driving a delivery truck and walking while performing a city delivery route when they began to experience heat-related dehydration.,1
An employee was cutting a piece of wood with a miter saw. The blade severely cut his thumb as he was removing the piece of wood.,1
An employee had installed a new pole and returned to the operating center when they began to feel light-headed and nauseous. The employee was hospitalized for heat-related illness.,1
An employee had been cleaning out athletic sheds and a garbage disposal. The employee became ill and sustained heat stroke.,1
"On August 12, 2021, at approximately 7:15 a.m., an employee was placing toast into the hot box in the main kitchen in preparation for breakfast. As the employee turned around, they fell to the tile floor and suffered a left hip fracture that required hospitalization.",1
An employee fell 10 ft. 10 in. from a flat roof to the ground resulting in hospitalization.,1
"An employee slipped, fell, and struck the back of their head on the floor, resulting in head trauma that required hospitalization.",1
"An employee was operating a drawing bench. The rollers caught the employee's shirt, then the glove on his right hand. The rollers then pulled in his hand, breaking four fingers.",1
"An employee was placing a rug into the mandrel opening to be rolled and wrapped when she experienced an issue getting the rug corner into the slot opening. At the same time, a co-worker came to her left to place a second rug into position to be rolled and wrapped on the same cycle. The switch that clamps the ends of the rugs was activated and the employee's right middle fingertip was pinched, resulting in a partial amputation.",0
"An employee was using a hoist to place gears in a pallet box. After setting a gear down on the pallet, the employee unhooked the chain sling and was moving the gear into the box by hand; the gear slid toward him and pinched his right ring finger against the box causing an avulsion injury.",1
"An employee was clearing a jam in a trim press when their head was crushed by a moving piston, resulting in a brain bleed.",1
"An employee was placing waste wood onto a 30-inch-wide, 20-foot-long conveyor. The employee was trying to remove a piece of wood that had hung up in the conveyor's bottom belt when the conveyor caught his hand and amputated his right arm at the shoulder.",0
"On August 12, 2021, an employee was installing an ice and water shield on a roof. The employee fell, hitting a deck joist and suffering internal injuries, cracked ribs, and a lacerated chin.",1
"An employee was operating a packaging machine. As he tried to remove a piece of plastic that was stuck inside the machine, one of the machine's knives cut his right ring finger and nicked his right little finger. The tip of the ring finger was amputated.",0
An employee was inspecting a hopper bin when their loose clothing was caught in a tail pulley. The employee suffered a broken arm.,1
"An employee slipped on a broken piece of cardboard and fell to the floor, breaking her hip.",1
An employee's left ring finger was caught in a door jamb and amputated.,1
"An employee tripped and fell onto the office floor, suffering a broken right femur.",1
"An employee was using a hammer to remove concrete from a water nozzle on a ready-mix concrete truck. The truck's drum pinched the employee's right index finger, causing a fingertip amputation below the nail.",0
An employee was running a bindery machine in diagnostic mode. His right hand was caught in the shuttle pocket and the machine amputated his middle fingertip.,0
"An employee was removing a grooved cap when the cap came off under pressure and struck the employee in the face, resulting in a contusion.",1
An employee was working on a line as a filling operator and became pale and dizzy. The employee was hospitalized for heat-related illness.,1
An employee was replacing load wheels on a pallet jack. The jack fell and amputated his left index finger.,0
"An employee was working on a cut-out when their shoulder contacted an overhead powerline, resulting in second and third degree burns to their left arm.",1
"An employee was draining a soak tank. The employee slipped on the back dock, fell into scalding water, and suffered burns to the right leg and foot. The employee was hospitalized.",1
"An employee was walking in the break room when they slipped on water that had been spilled on the floor, resulting in a fractured right patella.",1
"An employee was in a mixer room scooping discharged product when an auger blade caught their left middle finger, resulting in a degloving of the fingertip.",1
"An employee was installing an HVAC unit while on a 4-foot ladder when they lost their balance and fell, hitting the back of their head on the ground and resulting in a head injury.",1
"An employee was walking into the mailroom when she tripped on the door threshold, resulting in hospitalization.",1
An employee was pushing equipment into place when a drawer on a machine closed and amputated 8mm of their little finger.,0
An employee was adjusting the box on a stripping machine that catches metal pieces when a fingertip on their left hand was amputated.,0
"At about 3:30 a.m. on August 13, 2021, an employee was using a belt sander to repair a part when his right thumb tip was caught between the sanding belt and the part rest. The thumb tip was amputated.",1
An employee was rearranging boxed merchandise stacked on shelving when he fell 8 feet from the rack and suffered fractures to his feet and ankles that required hospitalization.,1
"An employee was wrapping plastic around a pallet when they tripped over a leg of a conveyor system, fell, and hit their head on the concrete floor, resulting in hematoma. The employee was hospitalized.",1
"A employee opened the hood of a customer's vehicle to begin work when a finger on their left hand contacted the radiator fan, causing a partial amputation.",0
"An employee drove a stand-up powered industrial truck (PIT) into a warehouse as a co-worker moved a skid using a separate PIT. The skid on the co-worker's PIT struck the operator's compartment of the injured employee's truck, pinning the employee's hip and resulting in a hip fracture.",1
"A trim die was being transported by a forklift. When the die was placed on the ground, the top part of it popped off and crushed an employee's hand against a set of metal stairs. The employee suffered a laceration to the right hand between the thumb and the index finger.",1
"An employee was pressure washing a valve when the tip of the pressure washer contacted his left foot and the water stream penetrated his rubber boot just below the left pinky toe, resulting in a puncture wound.",1
An employee stepped onto steel grated steps and received an electric shock due to a frayed extension cord. The employee was hospitalized.,1
"An employee was using an air gun to blow saw dust off wood when his hand contacted the router bit on the machine, resulting in a left thumb amputation.",1
"An employee walked into a store, tripped on a carpet in front of the door, and fell. He suffered a broken femur.",1
An employee was cleaning a printing roller when his index and middle fingers were pinched between two rollers. The index finger was medically amputated.,1
An employee fell off a couch and suffered a broken left arm.,1
"An employee was walking from a store to the gas filling area when they tripped on the curb and fell, resulting in a fractured skull and brain bleed.",1
"An employee was on a ladder installing HVAC ducting. The employee's back made contact with a wire that was hanging out of an open electrical box. The employee sustained an electric shock, and later had a stroke and was hospitalized.",1
"An employee was getting gas at a gas station when their truck rolled backward and ran over their left foot, resulting in a broken foot.",1
"An employee was removing protective ropes from pipes when they were struck by a semi-truck that was backing up. The employee's left leg became crushed between the beveled end of a pipe and the semi-truck's rear bumper, resulting in a broken left leg.",1
"On August 13, 2021, an employee was lubricating a bearing in a hinge puller machine. The machine restarted, and the employee's right hand was caught between the bearing and a fixed rail. The employee suffered a broken right thumb and was hospitalized.",1
"A forklift hit a pallet holding corrugated boxes. The boxes fell, causing a nearby employee to stumble and fall to the floor. She suffered a broken hip.",1
"An employee was in the crow's nest of a charge deck operating an overhead crane to break foundry returns in a return pit. A section of gating exited the return pit and struck the employee's lower left leg, resulting in a compound fracture.",1
"An employee was removing face wire from a kevel on a barge when their finger became pinched between the face wire and the kevel, resulting in a fracture and removal of soft tissue from the left ring finger.",0
An employee was working on a spring hinge on a trailer door and injured his finger.,1
"An employee was working from a scissor lift, helping cut a wooden display wall into small sections for removal. The employee cut a section free to be lowered. When it was pulled away from the wall, some attached electrical conduit pulled the entire wall toward the scissor lift and knocked it over. The employee fell to the concrete floor next to the lift, striking his head on the floor and suffering a head injury. He was hospitalized and underwent surgery.",1
"An employee had just checked the temperature of some product on a trolley and was trying to pull the trolley back into a chiller. The trolley instead followed the overhead rail system to a different chiller, hit the rail stop mechanism there, derailed, and fell to the ground. The employee was pinned under it and suffered a broken left tibia.",1
"The employee was removing a screw housing from a machine when the machine housing pinched his left middle finger, resulting in a fingertip amputation.",0
"An employee was operating the trash can injection mold machine and noticed that the hopper was jammed with plastic material. As the employee attempted to unjam the hopper, the blade amputated the fingertips on his left hand.",0
"An employee was delivering mail when a dog ran across the street and bit her arm, resulting in cuts that required hospitalization.",1
An employee had finished unloading a trailer when they began experiencing tingling in their legs and were hospitalized for heat exhaustion.,1
"The injured employee was working in the platform of an aerial lift approximately 40 feet above the ground. Another employee was extending the boom of a telehandler with an iron girder truss attached to the forks. As the telehandler operator was lifting the iron girder truss, he simultaneously lifted the left-side outrigger. The length and weight of the girder truss caused the telehandler to tip on its side, striking a support beam. The support beam broke from the anchor bolts, causing the support beam along with an attached iron girder truss to fall backward and strike the aerial lift. The aerial lift fell and the employee was ejected from the platform, resulting in lacerations to the face and multiple lost teeth.",1
"An employee was climbing down a ladder and fell to the floor 8 feet below, suffering a broken right tibia and ankle.",1
"An employee tripped on a cable and fell on the floor, landing on their left side and sustaining a broken hip.",1
"An employee was climbing off the back of a delivery truck when he slipped and fell 52 inches onto a block wall that was adjacent to the parked truck, resulting in fractured ribs and a punctured lung.",1
"An employee pulled his truck into a return lot, got out, and was robbed and beaten with a 2-by-4 by one or two assailants. He suffered a skull fracture on the left side, fractures to the eye orbits, and a fractured collarbone, as well as bruising to the mouth.",1
"An employee was delivering parcels along their route when they were attacked by multiple dogs, resulting in hospitalization due to bite injuries.",1
"An employee was pushing scrap metal through a metal saw when the saw struck the employee's left little finger, resulting in amputation at the first knuckle.",0
"An employee was aligning the butt section of a wind turbine when his left middle finger was struck by the reaction arm when it extended, resulting in amputation to the first knuckle.",0
"An employee was restacking and palletizing materials when a forklift ran over his left foot, breaking it.",1
"An employee was standing on the side of a truck while putting trash into the truck when he was struck by a vehicle, resulting in a contusion and road rash.",1
An employee was helping remove forks from a forklift. A fork dropped and caught his left middle finger against the ground. The employee's hand and finger were cut.,1
"An employee tripped on a curb while crossing a parking lot and fell, landing on their left hand and suffering a broken left wrist.",1
Two employees were offloading 12-inch pipes from a truck at a construction site. They were operating the offloading mechanism when one employee's left little finger was pinched between one rolling pipe and the next. The finger was degloved and the fingertip was medically amputated.,1
An employee slipped and fell at a home while delivering a package. He suffered an arm injury.,1
An employee was clearing a jam in an edge bander machine. A machine part closed on the employee's right middle finger after the jam was cleared. The employee suffered an amputation to the last joint of the finger.,0
"An employee was driving a concrete mixer truck up a hill to a job site. The road's soft shoulder gave way at the rear of the truck, which rolled over. The employee suffered injuries to the head, neck, and right arm.",1
"The injured employee and three co-workers were lifting a dock plate when it slipped and pinched the injured employee's fingertip, resulting in a partial amputation.",1
"A contract employee was cutting a band on a package. The employee slipped and fell from the package to the ground, suffering a broken tibia and fibula.",1
"An employee was collecting conifer cone crops on an orchard ladder. The employee fell off the ladder to the ground about 10 feet below, suffering a broken leg that required surgery.",1
"An employee was leveling and anchoring racking uprights using a plumb bob level (attached magnetically to the upright about 3 feet above the ground). The employee was down on the ground tapping the foot of an upright into place with a small sledgehammer when the plumb bob level detached from the upright and fell/slid down, amputating his left index fingertip just past the last knuckle.",0
"An employee was operating a small jib crane in the shop to lift a small valve. While adjusting the rigging around the valve to position it, the employee's left ring finger was caught between the rigging and the valve, resulting in a partial amputation before the first knuckle and the removal of the fingernail.",0
"An employee was pushing pipe casing with a detached, 24-inch backhoe bucket when the bucket rolled down the hill and struck the employee, resulting in broken ribs.",1
"An employee was training on a lift when they struck a guardrail, resulting in a leg laceration.",1
"An employee was unjamming a forming machine when her fingers contacted the rollers that pull wire through the machine, resulting in a pinched ring finger and injuries to the little finger that required amputation down to the middle phalange. The machine was not guarded at the time of the incident.",0
"An employee was painting a steel fence in a rain garden/courtyard area. A vehicle backed uncontrollably from the street, jumped two curbs, pinned the employee between the car and the fence, and continued, striking a building. The employee suffered fractures to the collarbone, ribs, and a leg.",1
"An employee was cutting a block of wood with a table saw when the block slipped and the table saw lacerated four fingers on their right hand, resulting in hospitalization.",1
"An employee was troubleshooting a back surfacing and granule chute that was clogged when their right middle, index, and little fingers were amputated. The machine was not locked out at the time.",1
"On August 16, 2021, an employee was using a concrete saw cutter to cut an 8-inch diameter PVC sewer pipe when the blade contacted his left calf, resulting in a laceration that required hospitalization.",1
"An employee was ascending a ladder to perform roofing work when they fell off the ladder to the ground below, resulting in a lower back injury.",1
An employee was manually loading trash into a trash truck when he sustained heat stroke and was hospitalized.,1
"Two employees were lifting a 59-pound piece of steel plate into the engine room of a vessel. One of the employees, standing on the ground, lifted the plate up to the other and released it. As the other employee was lifting it into the vessel, it fell down through a hole. The first employee's left ring and middle fingers were caught between the plate's edge and a steel I-beam. Both fingers suffered multiple compound fractures; the little finger and half the ring finger were medically amputated the next day.",1
"An employee was mowing on a slope around a pond. The mower lost traction, flipped over once,  and landed back upright. The employee was hospitalized with broken ribs.",1
An employee was gathering shopping carts in the parking lot. She went inside and collapsed due to heat exhaustion.,1
"An employee was dismantling a vehicle. When the employee struck a bolt with a hammer, a piece of metal went into the employee's eye.",1
"A Turn-Key Construction employee was cutting aluminum trim with a saw blade. The trim snagged in the blade, pulling his finger toward it. The blade lacerated his finger to the bone.",1
"An employee was driving a forklift, moving pallets of finished product. He smelled something burning or melting and got out of the forklift. He traced a trail of antifreeze to the back of the vehicle; steam then shot out of the back of the vehicle. The employee sustained second-degree burns.",1
The injured employee was cutting duct work. A nearby scissor lift struck a steel pipe that was on a jack stand and caused the pipe to swing into the injured employee resulting in lower leg fractures.,1
"An employee was working on a conveyor. A chain drive engaged on the conveyor, pulling the employee's left thumb into a sprocket and chain. He suffered an amputation to the end of the thumb.",0
"An employee was cleaning a part in a machine. The machine came down on the employee's right hand, causing an amputation to the little finger.",1
"On August 17, 2021, an employee was inside a trailer that his truck had just backed up to a loading dock. As he tried to straighten a banded load of cardboard, the band snapped and the load fell, knocking him into the side of the trailer. He suffered head lacerations and a dislocated shoulder.",1
An employee was operating a cash register and was shot during a robbery attempt.,1
"After unloading metal roofing materials on a roof, an employee fell through a skylight to the ground. The employee was hospitalized with multiple fractures. Fall protection was not connected at the time of the incident.",1
"An employee and a co-worker were delivering a copier to a client. While using the stairs and a stair climber device for copiers, the machine fell and landed on the employee, who then fell down the stairwell. The employee suffered multilevel spinous process fractures from the T4-T10 levels that required hospitalization.",1
"An employee became dizzy and nauseated while doing underground work. He was hospitalized, suffering from heat-related illness.",1
"An employee was driving cattle in a pen corral. The employee climbed up a pen rail to keep from being rammed by an aggressive cow. The cow's horns caught his boot and pulled him to the ground inside the pen. He suffered fractures to the left tibia and fibula, as well as an injured left shoulder.",1
"An employee was setting up a vertical mill when it started. It began to turn and threw the employee out. The employee's left leg struck a table, and the employee's tibia was broken.",1
"An employee was bending rebar when his glove got caught in the machine and his left index finger was pinched, resulting in an amputation.",1
A temporary employee was operating a bar drill. His hand was pinched between a table and a metal bar on the exit side of the drill. He suffered a crushed finger.,1
"An employee was standing on the top of a grinder when it activated. Its feed wheel roller engaged and pinned the employee to a mill box, crushing the employee's abdomen.",1
"An employee was pushing the forks of a forklift to widen their position. He needed to get the forks around the hook it sits in. Once it cleared the hook, the fork slid quickly, catching the employee's right middle finger against the headache rack support. The finger was amputated.",0
"On August 18, 2021, an employee was stamping a metal piece on a press. As he was retrieving the piece, the press came down and crushed his middle finger. The finger was amputated.",1
"At 2:12 p.m. on August 18, 2021, an employee was demolishing electrical switches when the gear fell on him as it was being lowered. The employee's left leg was broken.",1
An employee was removing material that was blocking a drain for the fresh product auger. The auger contacted the employee's left hand and amputated three fingertips. The machine was not locked out/tagged out at the time.,1
"An employee developed heat exhaustion (chest tightness, tiredness, and a headache) while hanging drywall.",1
"An employee fell from a ladder on a vehicle, landing on the ground and suffering a hip injury.",1
"An employee had been digging with a shovel in a farm field and laying plastic in the heat. The employee felt hot, fatigued, and experienced dry mouth and shaky legs. The employee was hospitalized for heat stroke.",1
"An employee was grinding bolts on the base of a street light. The grinder bound up and spun out of his hands, causing a 2-inch cut on his upper left leg.",1
"An employee slipped on dew while getting out of his truck. He fell to the ground, suffering a broken right arm.",1
"An employee was mixing bentonite with a mixing machine. A small engine caught fire, and the employee suffered second- and third-degree burns. He was hospitalized.",1
An employee was using a high-pressure hose to clean a conveyor system. The employee suffered a severe laceration.,1
"An employee was cleaning a concrete placer. He was on the housing of the auger/hopper area, chipping out some built-up concrete, when his right foot slipped. The auger caught his pant leg and pulled in his right leg. The leg and the ankle were broken.",1
An employee was cleaning the elbow of a transformer when he suffered electrical contact burns to the left hand and flash burns to the right hand.,1
An employee was walking to a work station. The employee's right hand struck a counter balance bar and was broken.,1
"An employee was doing maintenance on a gas well pump jack. The brake did not hold when he set it, and a belt and pulley caught his hand. He suffered an amputation to the little finger, about 7/8 of the way from the end.",1
An employee was moving pallets using a powered pallet jack when their leg was pinched between the jack and a pallet. The employee sustained bruising to the lower leg and was hospitalized.,1
"An employee was climbing an A-frame ladder to take down a chain fall. The employee fell from the ladder to the ground about 5 feet below, suffering injuries to the right shoulder and left-side waist.",1
"An employee was climbing a ladder when it shifted to the right. The employee fell to the ground, suffering fractures to the left leg and foot.",1
"On August 18, 2021, an employee tripped over a hose near a fuel island and hit his head on the pavement. He suffered a bruise above his right eyebrow and was hospitalized.",1
An employee had just delivered mail to a house and was going down the steps when two dogs came out of the house and attacked her. One of the dogs jumped at her and bit her right arm while she lay on the ground. She suffered severe puncture and bite wounds to the forearm and biceps area.,1
"An employee was using a handheld plasma torch to cut the lid off a 55-gallon barrel. The barrel exploded, and the employee suffered broken ribs.",1
"An employee was demolishing a residential garage roof. The roof collapsed to the ground and the employee fell from the roof to the cement floor of the garage, suffering two broken wrists and a broken collarbone.",1
An employee was changing a belt on an electric apron feeder. The machine activated and amputated the tip of the employee's left index finger.,0
"At 11:00 p.m. on August 18, 2021, an employee was inspecting and setting up a press when it amputated the employee's left index finger.",0
A stand-up forklift operator was moving a rack of bumpers. He reversed and then got off the forklift as it rolled to a stop. His foot was caught between the forklift and a rack that was behind the forklift. The employee's ankle was fractured.,1
An employee was standing on a skid plate or slip plate when it amputated most of his big toe and part of his second toe.,1
"An employee was standing on a portable stair platform, using a flashlight to see if there was a water leak under a conveyor. Her left lower arm was caught between the conveyor belt and a roller. She suffered three fractures to the lower left arm between the wrist and elbow.",1
An employee had been using a scissor lift to caulk seams around an air conditioner. The employee exited the scissor lift and was kneeling on top of the air conditioner when he lost balance and fell to the floor approximately 13.5 feet below. The employee sustained a hip fracture and a laceration above the left eyebrow. Fall protection was not used at the time of the fall.,1
"On August 19, 2021, an employee was dismantling scaffolding. The employee slipped on a surface that was wet from rain and fell. He landed on the ground about 12 feet below and suffered head, back, rib, and left and right arm injuries.",1
"At about 3:00 p.m. on August 19, 2021, an employee was on a ladder, hanging artwork on a church wall. A volunteer leaned on the opposite side of the ladder, trying to support the employee, and the ladder destabilized. The employee fell to the floor and suffered a broken right shoulder, as well as a contusion to his right elbow.",1
"An employee fell while trying to sit down in a chair, landing on the floor and suffering a broken right arm and hip. He was hospitalized, requiring surgery.",1
An employee was operating a hydraulic shearing machine when the cutting blade came down and amputated the end of his left middle fingertip.,0
An employee was servicing an auto filler packaging machine when a belt and pulley caught his fingertip. His right index and middle fingertips were amputated.,0
"On 8/19/2021, at approximately 0400 hours, the injured employee was assisting another employee to remove a fluid end on a frac pump in the repair bay. A wrench was activated and the employee's ring finger was caught and amputated between the HTW and the fluid end.",1
"An employee was moving metal billets onto a load table with an overhead crane. The employee's fingers were caught between two billets, causing the amputation of the right fourth and fifth fingers.",0
An employee tripped and fell while walking to her car. Her left arm struck a metal signpost and was broken.,1
"On August 19, 2021, an employee was driving a reach truck in a warehouse area. As he went around a corner, the truck ran into another, parked truck with an empty pallet on its forks. The forks of the moving truck shattered the pallet. When the pallet broke apart, it struck the employee's legs causing a laceration on the left leg and a fracture to the right leg that required hospitalization and surgery.",1
"A security guard was starting his personal vehicle. While exiting the vehicle his feet got caught on the doorsill and he fell out of the car, fracturing his hip on the ground.",1
A freezer door handle caused an amputation to an employee's fingertip.,1
A baghouse was being moved using dolly carts. A cart got stuck on a crack in concrete; a forklift was used to lift the baghouse while an employee moved to adjust the cart. The baghouse slipped from the forks and crushed the employee's hand against the cart.,1
"An employee was installing satellite service at a customer's residence. While he was picking up a dropped screw from the grass, a snake bit his left middle finger.",1
"An employee was lifting a turntable out of a chassis of a boom. A crane lifting strap broke and hit his left hand, breaking his ring and little fingers. The ring fingertip was medically amputated.",1
"An employee fell backward from a truck bed to the ground, hitting raised concrete. He suffered injuries to the left shoulder and ribs and was hospitalized.",1
An employee was rolling a piece of metal in a rotary machine when their glove got caught on the corner of the piece and the machine partially amputated their left index finger.,0
Employees were sliding a 12-foot steel column when one employee's right hand was caught between the column and a metal plumbing sleeve. The employee's little fingertip was amputated at the first knuckle.,0
"On August 19, 2021, an employee was cutting an piece of plastic pipe with a cutoff saw. The saw kicked back and lacerated the employee's chest. The employee was hospitalized, requiring surgery.",1
"An employee fell through a roof hole, landed on a concrete floor about 17 feet below, and suffered a broken right wrist and upper right arm.",1
"On August 19, 2021, an employee was working with the deicer machine on an airplane. Finishing the job, he moved to close the 500-pound power module. His right hand was caught between the power module and the deicer machine. Three fingertips were amputated.",1
An employee was performing maintenance on a conveyor belt roller when their right thumb was pinched and amputated by the roller. The machine was not locked out/tagged out at the time.,0
An employee was returning to their workstation after a break and fell down stairs. The employee sustained a seizure and was hospitalized.,1
"On August 19, 2021, an employee was struck by a forklift and sustained lacerations to the right leg requiring hospitalization.",1
An employee's knee hit the frame of a conveyor belt. The employee suffered blood clots and was hospitalized.,1
"Two employees were on a utility pole, shifting position and equipment, when the pole broke. The employees fell 15 feet. Employee 1 suffered a broken jaw, a broken nose, and a broken vertebra and was hospitalized. Employee 2 was treated and released.",1
"On August 19, 2021, an employee was unloading a pipe storage rack from a flatbed trailer. A chain was holding two sections of pipe rack together. When the chain was removed, a section of pipe rack became unstable, causing the rack and the employee to fall approximately 3 feet from the flatbed trailer to the ground. The employee became pinned under the section of pipe rack and was hospitalized with a fractured pelvis. The section of pipe rack was 30 feet long and weighed approximately 1,380 pounds.",1
An employee was exiting a box truck when he fell forward to the concrete floor 2 feet 10 inches below. He suffered a broken left arm and a head laceration.,1
An employee was adjusting the direction of a structure-mounted air circulating fan. The fan blade struck and amputated his right index finger.,0
"An employee was delivering mail when he became dizzy and nauseated, suffering from possible heat-related illness.",1
An employee stood on an extension ladder to guide a metal pipe into a hole/drum. The pipe made contact with a pipe that had been previously placed in the drum and knocked it loose from its friction weld and crimp. The employee then jumped off the ladder rather than be struck by the loose pipe. The employee landed on the floor and sustained a fracture to the left tibia and right heel.,1
An employee was operating an electric pallet jack when it collided with another pallet jack. The employee suffered a crushed right foot.,1
An employee was working with sheet metal. A sliver of the metal penetrated the employee's gloves and punctured their hand. The employee required surgery to remove the metal.,1
"An employee was startled by a dog while installing internet service at a residence. He ran, fell to the ground, and suffered a knee injury.",1
An employee suffered a broken kneecap and a shattered tibia. The employee was hospitalized.,1
"A maintenance employee was attacked by a tenant at an apartment complex. The tenant struck the employee in the head with a hammer, causing a laceration.",1
"An employee tripped on an anti-fatigue mat at a register. She fell to the floor, breaking both shoulders, and was hospitalized.",1
"An employee was checking to see if product was flowing through a blender. When the power to the blender was turned off, the pneumatic fly gate valve closed on the employee's left hand and amputated three fingertips.",0
"An employee was in an aerial lift's metal bucket, installing a banner on the side of a building. The employee finished placing the banner and pulled back to take a picture. The aerial lift came into contact with a power line; the employee was shocked, suffering second-degree burns to the chest and head.",1
"An employee was walking to a parking area. He fell while stepping off a curb, landing on the pavement and breaking his elbow and humerus.",1
"On August 20, 2021, an employee was performing maintenance work on an air conditioner. The employee's steel-toed boot made contact with a 240-volt wire. The employee lost consciousness and suffered a broken right clavicle, a laceration between the right thumb and finger, and bruising to the right side of the face.",1
"An employee fell from the cab of a provisioning truck while dumping trash from the truck. He landed on the ground and suffered broken ribs, collapsed lungs, and spinal fractures.",1
An employee was attempting to remove a jammed staple in a pneumatic staple gun. The staple gun fired a 2-inch staple into the employee's right thumb and palm.,1
"At 7:24 p.m. on August 20, 2021, an employee tripped and fell over a pallet of product at a warehouse. He cut his ankle, then tripped and fell again while standing up, suffering open fractures to the tibia and fibula. He was hospitalized.",1
An employee was entering a trailer to unload it. The truck pulled forward and the lift fell and got hung up by the trailer and the dock plate. The employee suffered a fracture to the T12 vertebra and was hospitalized.,1
An employee suffered a herniated disk while picking up a box containing a 74-pound roll of sheet membrane waterproofing.,1
"An employee was tightening a belt on a golf cart when the seat of the cart fell forward, hitting the ignition. The vehicle turned on and the employee's left hand was pulled in. The belt amputated his index fingertip.",0
"An employee fell off a bulldozer while changing a condenser. The employee landed about 7 feet below, suffering five broken ribs and a collapsed lung.",1
"A forklift was being used to remove a 1,500-lbs. pad of copper tape from a pallet. The pad fell and landed on the injured employee's left foot, breaking it.",1
An employee was installing a sprinkler system mainline when they fell from a ladder to the concrete floor. The employee was hospitalized with a fracture to the right side of the pelvis.,1
"An employee was scaling meat prior to filling in pouches on a bag former machine when their right-hand fingers were pinched in the machine, resulting in a laceration and partial amputation of the middle fingertip and a laceration of the ring finger.",0
An employee was shocked while practicing tack welding.,1
"Employees were inspecting a grinder machine. While one of them was turning the grinding blades, his right hand was caught in a shear point between them. The blades lacerated all four of his fingers. He was hospitalized.",1
"An employee was driving an airport tug when it ran over chocks. The employee was ejected and the tug ran over his left lower leg, breaking it.",1
An employee was positioning a pole to be raised up. The pole hit an overhead power line and the employee was shocked.,1
"Employees were mountain biking at a team event. An employee fell on their head, sustaining a fractured C6 vertebra, and a misaligned C7 vertebra, and a separated knee ligament.",1
An employee was exiting a truck. The door closed on his right middle finger and amputated it.,0
An employee was cutting an air line when the cutting tool amputated the tip of his left index finger.,0
"An employee was entering a building after cleaning a floor drain in a courtyard. He slipped and fell down a flight of 7 stairs, coming to rest on a landing and suffering a broken left ankle.",1
"An employee tripped while walking the plant floor, but caught himself before falling. The employee sustained a bulging disc in his back and was hospitalized.",1
An employee was operating a wire drawing machine when it partially amputated his right index finger.,0
"An employee was trying to break up products that were clogged in the rotary valve of a grain bin dust collector. The collector partially amputated two fingers on the employee's left hand, up to the second knuckle.",1
"An employee was walking across a yard. A piece of metal from a shredder struck the employee in the face, causing a laceration and fractures to the face and jaw.",1
"An employee was cutting a tie wire used to suspend parts for hot-dip galvanizing. A metal grate fell when the wire broke, striking his leg and lacerating the shin/calf area. He was hospitalized.",1
An employee was removing a package from a conveyor belt when he fell on his knee and injured his hip.,1
"An employee was doing housekeeping work with a 150-horsepower industrial vacuum. The vacuum sucked in a piece of plastic, then sucked in the employee's right arm as the employee tried to remove the plastic. The employee was hospitalized, undergoing surgery to the arm.",1
An employee was cutting a carcass using a knife. The knife lacerated the employee's bicep.,1
A temporary employee lost his balance and fell while walking down a hallway. He suffered a broken right hip and was hospitalized.,1
"An employee was preparing a skid for transportation. The handrails had been removed, and the employee was tying them down, when a rope broke. The employee fell backward to the ground about 6 feet below, suffering broken ribs.",1
"An employee tripped on uneven concrete while delivering a package. The employee fell, suffering compound hip fractures.",1
An employee was making an electrical repair. An arc flash caused second-degree burns to the employee's face.,1
"While checking the source of an electrical failure, an employee suffered a high-voltage shock, with severe burns to the arms, legs, and torso.",1
"An employee was operating a stand-up forklift in a freezer area. The forklift struck a rack and ejected the employee, who suffered a broken left arm.",1
"An employee was taking a break outside his work vehicle at a convenience store when he was attacked by a customer with a pair of scissors. He called 911. When the operator asked which way his attacker had gone, he stepped away from his vehicle and the attacker hit him with his van. The employee suffered a head injury; multiple broken ribs; abrasions all over his body from being dragged by the van; and injuries to the right shoulder, right knee, right ankle, and lower back.",1
An employee was adjusting the belt on a machine when their finger became caught between the belt and the pulley. The employee suffered an amputation to the finger.,0
An employee was cutting beef shanks with a saw. The sawblade amputated his right middle fingertip to the nail.,0
"An employee was working as a casting assistant in a casting area when he began sweating profusely and feeling ill. He was hospitalized, suffering from dehydration and heat exhaustion.",1
"An employee was changing the pad die on a machine. The die and the old pad were lifted with a hoist. The pad started swinging and broke the employee's left middle finger as the employee tried to stop it. The employee was hospitalized, requiring surgery.",1
"On August 23, 2021, a temporary employee fell through a soft spot in a roof. He landed on the ground about 10 feet below and suffered a broken leg.",1
An employee was walking out of a storage area on a warehouse floor when a clamp truck struck him. He suffered a broken pelvis.,1
"An employee was removing a hickey from the back of a web press. The employee's rag was pulled into the press, which in turn pulled in his left fingers between the plate and water form cylinder. The employee suffered amputation of the left thumb and degloving of the left hand.",0
"An employee was lowering a vehicle lift when it crushed his right index finger, causing a partial amputation.",0
An employee was sanding the bottom of a boat when he experienced pain in his chest and left arm. The employee was hospitalized for a cardiac event.,1
"An employee was backing up a forklift to line up and put a pallet of product in a storage rack, when he struck a rack beam. The beam dislodged and hit him in the back. He was hospitalized for a contusion.",1
"An employee was unloading material from a semi trailer using a standing pallet jack. While exiting the trailer, the employee struck a recycling dumpster being carried by another pallet jack. The employee suffered lacerations and fractures to the right foot.",1
"An employee was changing a product transfer hose. Sodium hydroxide splashed onto the employee's face, eyes, and torso. The employee sustained chemical burn to the eye(s).",1
"An employee was taking inventory in a warehouse aisleway. A lift truck struck the employee, who suffered a jaw and neck laceration from a metal part of a storage rack.",1
"An employee was shoveling excess dirt from the bed of his truck. While exiting the truck, the employee fell to the ground, resulting in three broken vertebrae.",1
"Two employees were clearing debris from the back of a dump truck after it had dumped its load of soil. They lifted the tailgate up, but it fell and crushed an employee's right ring finger against the trailer bed. The fingertip was amputated.",0
An employee was about to use a captive bolt gun to stun a bull that was down in a cattle pen. The bull got up and knocked the employee to the ground; the stun gun went off and struck the employee in the left thigh. The employee suffered a broken femur.,1
An employee was maintaining an electrical box. He suffered an electrical burn to the right hand and arm and was hospitalized.,1
"An employee fell off the rear of a golf cart as it turned. The employee's head struck the concrete, causing head trauma.",1
"An employee tripped over a garment rack in the entrance of a locker room. The employee fell, striking their head on the concrete floor and losing consciousness for several minutes. The employee was hospitalized.",1
"An employee was helping rig up a drilling rig. While he was driving a securement pin on an upper spreader beam, another spreader beam (stacked on the first one) slid over and struck his left foot. The foot was broken.",1
"At about 6:00 p.m. on August 23, 2021, an employee became ill while working as a package handler. The employee was hospitalized, suffering from dehydration.",1
"An employee was inspecting vehicle repairs in the delivery department. The employee felt dizzy, nauseated, and was having cramps in their shoulders and neck. The employee was hospitalized for heat exhaustion.",1
"An employee was doing maintenance work on an air handling unit when he tripped on a condensation line. His left hand contacted a belt, which caused amputations to his ring and middle fingertips.",0
"While walking on the sales floor, an employee tripped and fell sustaining a fractured right hip.",1
"An employee was working on a piece of welded equipment. Having been lifted on one side by a crane, the equipment was being supported by the crane on one side and by a horse and braces on the other. While the employee was under the equipment adjusting the horse, the equipment shifted; the horse struck and injured the employee.",1
"An employee was reconnecting a demo fixture. He was shocked while stripping a wire and fell from an A-frame ladder, landing 3 feet below. He suffered a contusion and hematoma to the lower back.",1
"At 9:15 p.m. on August 23, 2021, a utility worker developed signs of heat exhaustion. The employee was hospitalized, suffering from dehydration.",1
An employee fell while stepping on a box to crush it. The employee landed on the ground and suffered a broken femur.,1
An employee tripped while carrying a bucket of hot tar. The bucket dropped and splashed tar on his feet and right arm. He suffered burns to the arm and both ankles.,1
"At 12:02 p.m. on August 26, 2021, an employee lost consciousness while working on a rooftop. The employee slid off the rooftop, fell about 30 feet, and suffered fractures to a shoulder blade, the pelvis, three ribs, and both heels. The employee was hospitalized. Fall protection was not being worn at the time of the incident.",1
A correctional officer was assaulted by an inmate. The officer sustained a traumatic head injury requiring hospitalization.,1
"A flagger was struck by motorists, suffering fractures to an ankle, a lower leg, and a neck vertebra, as well as head and arm lacerations.",1
An employee was gathering up rented materials from a wedding. A fire started and the employee suffered burns.,1
"An employee fell from a conveyor belt, landing on the floor 1 1/2 feet below and suffering a broken right knee.",1
"An employee was cutting a block of wood with a saw when the wood block pinched and the saw went across the employee's right hand, resulting in a laceration and a subsequent amputation of the index finger.",1
"Employees were working in a 5-foot-deep trench. While an employee was repositioning pipes, the gravel layer toward the bottom of the trench gushed out of one of the sidewalls of the trench and engulfed his right foot, trapping him. Simultaneously, the force of the rushing soil pushed his lower right leg sideways. He suffered a broken tibia and was hospitalized.",1
"An employee slipped on a wet lawn, fell, and suffered a broken ankle. The employee was hospitalized and underwent surgery.",1
"On August 23, 2021, an employee tripped and fell out of the passenger side of a postal delivery vehicle, landing on the ground and suffering a broken right leg. The employee was hospitalized.",1
"An employee was reversing a forklift out of a pick location and struck a plastic barrier around the steel support beams. The employee's right little finger was crushed between the forklift and the barrier, resulting in a partial fingertip amputation.",0
An employee's hand was caught in the track of an oven. The employee suffered a partial amputation to the right index finger.,0
"An employee was operating a zero-turn lawnmower when it ran over a pipe, lodging the pipe between the deck and the ground. As he was trying to remove the pipe, the lawnmower fell and struck his finger. He suffered an amputation.",1
"An employee was placing sod alongside a roadway. After being hit by a car mirror, the employee jumped back and fell into the path of a skid steer that was backing up. The skid steer ran over his legs, breaking both of them.",1
"An employee developed heat stress after processing donations in a hot, humid warehouse. The employee was hospitalized.",1
A temporary employee was operating a crimping machine and caught his right index finger in the machine resulting in a laceration. The employee was hospitalized.,1
"Two employees were working together to rotate the arbor on a slitter and tape the slitter rubbers. As an employee was taping the rubbers, the rotating arbor grabbed his left hand and pulled his index and middle fingers into a pinch point. Both fingers were amputated.",1
An employee was working on the production floor in a staging area where she was folding and labeling cartons. The employee stepped out of the aisles of stacked pallets and was struck by a reversing forklift transporting a pallet of cartons. The forklift struck her right foot and she was hospitalized.,1
"On August 24, 2021, an employee slipped off rigging equipment and suffered a broken heel.",1
"An employee was removing a vent hose from a rotary valve. The employee's left index finger was caught in the equipment, which amputated the fingertip at the top knuckle.",1
An employee was using a riding mower when it got caught in a tree branch. The employee had to lower the roll-over protection. Its hinge caught his left thumb and amputated the tip.,0
An employee was verifying that the extrusion was feeding correctly when the glove on their left hand was pulled into the extrusion rollers resulting in amputation of the left index fingertip.,0
An employee was leaving the building using a sidewalk ramp when they fell and suffered a broken bone in their left knee and a broken left arm.,1
An employee was installing a pallet/conveyor belt system when his right hand was caught between two metal pallets. He suffered an amputation to the index fingertip.,0
"An employee was on horseback in a cattle pen, trying to herd a sick cow out of the lot. The horse lost its footing and fell onto the employee, breaking his left tibia and fibula. He was hospitalized and underwent surgery.",1
"An employee was using an automatic bander to band a wheel. His gloved finger was pulled in and caught in the banding, which removed the flesh from his left index finger above the second knuckle.",0
"On the morning of August 24, 2021, after working with another employee to move cattle from horseback, an employee rode his horse into a barn. He was later found lying face down with a head injury, having been kicked in the head by the horse.",1
"An employee was loading a cargo plane. The employee's right index finger was caught between a railing and a pallet, and the fingertip was amputated.",0
"An employee was performing a die change on a 150-ton press when he began to feel weak, suffering from possible dehydration and/or heat exhaustion.",1
The injured employee was training a co-worker in a weld cell and putting parts into the fixture. The injured employee's left middle finger got caught in the head rest clamp resulting in a partial amputation of the finger at the nailbed.,0
"An employee became ill and was hospitalized, possibly suffering from heat-related illness.",1
"An employee was guiding a steel plate into a press brake. The plate slipped from the clamp that was suspending it in the air. It fell on the employee, who suffered a broken wrist.",1
"An employee was operating a ring roller machine. Her left hand was pulled into the machine, which lacerated her fingers and broke her thumb.",1
"An employee was standing between a motorized pallet jack and an empty stack of pallets, filling an order. A forklift struck the stack of pallets, which pinched the employee against the pallet jack. The employee's hip was broken.",1
"On August 24, 2021, an employee was using a pry bar to expand brake shoes and springs. The bar slipped and the brake shoe closed on the tip of the employee's left ring finger, causing the amputation of the fingertip.",0
A pizza delivery employee was approaching a customer's residence when he was shot from behind by assailants attempting a robbery. He sustained bullet wounds from a handgun in the right knee and right elbow and was hospitalized.,1
"A flagger was struck by a vehicle, resulting in injuries to their shoulder and back.",1
"An employee was loading an ATV onto a flatbed truck. The ATV rolled over onto the employee, who suffered a broken jaw, nose, and eye socket.",1
"An employee was operating a table saw when the guard got stuck. As the employee was freeing the guard, their gloved hand was caught by the sawblade and drawn in. The employee sustained a finger amputation.",0
"On August 24, 2021, an employee was unjamming a pad lock from an energized bar loader machine when their left middle finger was caught in a pinch point. The employee sustained a partial fingertip amputation.",1
"An employee slipped on damp underlayment and fell off a second-story roof, landing on the ground and suffering fractures to the hip and face.",1
"A crane operator came out of a crane cab to move cardboard boxes, fell about 30 feet, and suffered multiple fractures and a kidney laceration.",1
"A duct support structure was being assembled. Its framing fell, pinning an employee under it. The employee suffered a broken arm (with muscle damage) and a laceration to the leg.",1
"An employee was operating a powered pallet jack on a loading dock. The pallet jack collided with a forklift, and the employee suffered a broken femur.",1
"An employee had just finished pouring a mold using a pouring ladle. The ladle would not stop pouring; while it was being moved by crane, it spilled molten metal onto the employee. The employee's right leg and foot were burned.",1
An employee was rolling a large rock when his right index finger was caught between it and a skid steer bucket. The finger was amputated to the knuckle.,0
"An employee became ill while installing the wall of a storm drain. The employee was hospitalized, suffering from heat stress.",1
An employee was using a table saw to cut laminate flooring. The saw kicked back and the employee's fingers were amputated.,0
The injured employee was assisting a resident and another employee. The injured employee fell backward to the ground and sustained a back injury.,1
"While working in the deli, an employee fell on the floor and broke their hip.",1
An employee's right hand and fingers were caught between a tablet press and a lid. The employee suffered a laceration and an open fracture to the little finger.,1
"An employee was on top of a 30-yard roll-off box that was loaded with pallets, trying to remove the pallets from the sides so that he could tarp the box. As he tried to dislodge a pallet that was sticking up out of the top of the box, it suddenly came free. He stumbled backward, then fell off the box to the ground, suffering a cut on the left side of the head and a concussion.",1
"An employee was standing on the second or third rung of an A-frame ladder, holding a piece of sheet metal and using pliers to put tension on it. The rubber grip on the pliers came off and the employee fell, suffering lower back fractures.",1
"Employees were trying to fix a hose on a skid loader's concrete breaker attachment. The skid loader attached to the breaker, raised it, and began to rotate it forward to give the mechanic access. The breaker fell off the skid loader and broke the right leg of the mechanic, who was standing to the left front of the skid loader.",1
"Three employees were emptying a full container of trash into an outside dumpster. As they were lifting the container over the edge of the dumpster, it came down and caught one employee's right hand against the dumpster's edge. The employee's middle and ring fingertips were amputated, including the nails.",0
"An employee fell from the top of a stack of forms, landing about 5 feet below and suffering a broken femur and hip.",1
"On August 25, 2021, an employee slipped on liquid on an operating room floor, fell, and suffered a broken right femur. She was hospitalized.",1
"An employee was loading plant material onto a truck. The plant's 50-pound, 20-gallon plastic container broke, causing the employee to lose his balance and fall off the truck. He suffered three herniated disks in his neck.",1
An employee suffered dehydration and was hospitalized.,1
"On August 25, 2021, an employee fell in a stairwell. She was hospitalized, having suffered a broken femur.",1
An employee was loading and offloading and was struck by a forklift operated by a vendor resulting in amputation of the employee's leg and hospitalization.,1
"An employee was unjamming a roller from a paper machine. The employee pushed on the roller to remove a roll of splice tape that was preventing it from ejecting and caught his right ring finger between the roller shaft and the machine frame. He suffered a crushed fingertip, which was medically amputated.",0
A postal employee was delivering mail to a residence when three large dogs broke through a fence and attacked. The employee suffered bites to both arms and the right thigh that required stitches.,1
"At about 9:02 p.m. on August 25, 2021, an employee was trying to clear clogged wastewater pumps. The employee turned off power to the pumps and started the procedure to clear the lines. Upon opening a line, the employee was sprayed by heated liquid and suffered second-degree burns to the torso and upper right arm. The employee was hospitalized.",1
An potential employee's left leg was pinned and broken between the forklift he was operating and another forklift.,1
An employee fell about 4 feet backward while trying to connect lights. He suffered a head injury and was hospitalized.,1
"On August 25, 2021, an employee was standing on a platform next to an extruding line when hot plastic was expelled from the line during startup. It landed on the employee's cheek, ear, and forearm, burning the skin.",1
"After finishing pole top rescue training in the heat, an employee became ill and was hospitalized, having suffered a myocardial infarction.",1
An employee was ensuring that equipment was running. The employee reported a lack of energy and cramping and was hospitalized with heat stress.,1
An employee lost balance while walking and his left hand contacted fan blades. He suffered partial amputations to the little and ring fingers.,0
"Two employees were pushing a parts rack through a facility. They stopped to move two vacuum pack hoses that were on the floor blocking the path of travel. While one of the employees was moving the vacuum packs, he stepped on the hoses, lost his balance, fell into a guardrail, and then landed on his right hip. His hip was broken.",1
"An employee was walking when they slipped on a wet floor and fell, resulting in a broken right ankle.",1
Two employees were arguing in the company parking lot. One employee shot the other employee in the leg. The injured employee was hospitalized.,1
"An employee was using an emery cloth to polish a round stock bar on a conventional lathe. The shaft grabbed the emery cloth and pulled the employee's right hand against the shaft. He was able to get free, but the shaft then pulled his left hand and lower arm around itself. His forearm was broken.",1
An employee became dehydrated while supervising a roofing project.,1
"On August 26, 2021, at 1:30 p.m., an employee was walking across an aisle to a pedestrian walkway when a forklift swerved toward the employee and the rear wheel of the forklift ran over employee's right foot. The employee suffered broken bones in their right foot that required hospitalization.",1
"An employee was using an 8-foot, A-frame ladder while pulling wiring for a new security camera through the wall to the outdoor loading dock area. While stepping down the ladder, the ladder tipped away from the building and the employee tried to step down again to stabilize it. The ladder continued to fall and the employee fell onto a guardrail and struck the ground, resulting in fractures to the face and various bruises.",1
"At about 2:00 p.m. on August 26, 2021, an employee was replacing a pulley on a conveyor belt. The employee's left hand was pinched between the pillow block bearing and the base plate, and the employee suffered amputations to the tip of the little finger, half of the ring finger, and half of the middle finger.",0
"On August 26, 2021, an employee was working from an aerial lift basket, installing metal wall panels on a new building. He fell out of the basket, landed 10 feet below on a lower canopy roof, then bounced/rolled off and fell 15 feet to the dirt ground. He suffered a broken wrist, broken ribs, a ruptured spleen, and a punctured lung and was hospitalized.",1
"A hoisted metal cover, about 3 feet by 3 feet, fell off the hook of an overhead crane that had been used to lift it. It landed on the left hand of an employee who was cleaning under it, and he suffered fractures and a partial amputation (below the nail) to the left middle finger.",1
"An employee was reinstalling a chain link fence. The employee was holding a bar/pipe that passed along the top of the fence to hold it up. The bar/pipe fell and hit the employee in the shoulder area, causing a neck/shoulder injury.",1
"An employee picked up a handgun and it discharged, causing a gunshot wound to the employee's leg.",1
An employee became dehydrated while delivering packages.,1
An employee was repairing a flat tire on a forklift when he began to experience heat-related illnesses and later passed out. He was hospitalized for heat exhaustion.,1
"An employee was sitting on a stool at a cash register, scanning purchased items. Her foot got stuck between the stool and the bag carousel, causing her to fall to the floor and suffer a broken hip.",1
An employee was rigging a steel road plate. The tip of the employee's right middle finger was caught between a lifting chain and a lifting ring. The fingertip was amputated.,0
"An employee had placed a casting on a crane hook and was operating the crane by remote control. When the employee grabbed the casting to turn it, it fell off the hook and struck the employee's fingers. The employee suffered a partial amputation to the right ring finger, as well as lacerations to the right ring and middle fingers.",0
An employee had been directing a concrete truck. The employee's right hand got stuck between the truck's chute and the hopper of the concrete pump. The employee sustained crushed fingers and an injury to the wrist.,1
"An employee had just washed out an emulsifier feed auger, a piece of equipment with two rotating augers. He noticed that liquid was no longer draining from the equipment. As he tried to free any product that might be causing a plug, the lower auger amputated his right index finger up to the nail.",1
"An employee was stepping around caution tape surrounding a newly painted floor when she slipped and fell. While attempting to stop the fall, the employee fell on her right hand, resulting in a broken wrist that required surgery and hospitalization.",1
An employee was cleaning the air cylinder in a tearing machine and amputated their left middle finger.,1
An employee slipped and fell to the ground while walking down a mountain. The employee suffered broken bones and was hospitalized.,1
"Employees were stacking pipe. As they added a pipe to the third tier using a skid steer, the pipe slid and fell onto an employee. The employee suffered an injury to the left ankle and leg.",1
A temporary employee's right arm was crushed between two dies on a die cut press.,1
"An employee was picking up a pipe from a plasma table. The pipe slipped out of her hand, catching it against the plasma table. The employee suffered an amputation to the right middle fingertip.",0
An employee was mowing the grounds on a rider-mower when he began to feel hip pain and couldn't move.,1
"An employee was unloading liquid asphalt cement from a semi-tanker. He left to retrieve a new gasket for the tanker's hose. The valve was opened while he was gone, and when he returned and removed the hose, 300-degree asphalt cement sprayed out of the connection and struck him. He suffered second-degree burns to his left and right forearm, left thigh, lower stomach, and right shin toward the ankle.",1
"An employee was adding a second trailer with a dolly to the rear of a trailer. The employee's right leg got stuck on the dolly and the employee fell on their left leg, suffering an injury to the left hip.",1
"An employee slipped on yellow paint on the floor and fell, suffering a head injury.",1
An employee was repairing truck wheels. A socket the employee was using cracked as the employee was using it to torque a hub nut. The employee fell to the ground on his back and suffered a lumbar strain.,1
An employee was lifting a bucket of bolts weighing approximately 60 to 70 pounds when they suffered an inguinal hernia that required surgery.,1
"After working from an aerial bucket for about 10 minutes, an employee developed cramps in his arms and shoulders. He lowered himself to the ground, where he lost consciousness. He was hospitalized, suffering from heat exhaustion.",1
"An employee was watering plants. The employee tripped over a garden hose and fell to the ground, suffering a broken arm.",1
"On August 26, 2021, an employee was working on the dough production line and suffered the partial amputation of their finger while clearing dough from the opening. The employee was hospitalized.",1
"A dog groomer was bitten by a dog on August 26, 2021. Their hand began to swell and they were hospitalized for treatment.",1
"On August 26, 2021, an employee was turning a stand-up forklift when it struck a pole, then a rack. The employee's foot was caught between the forklift and the rack, causing a partial amputation to the foot.",0
"An employee was repositioning a tool that was on a forklift when their right little finger was pinched between the tool and the forklift, resulting in an amputation just past the fingernail.",0
"A forklift ran over an employee's left foot, breaking it.",1
"An employee was loading a die onto a press. While maneuvering it to see if it was loaded correctly, the employee slipped on some oil on the floor and braced herself by holding onto the die. The die fell off the press and onto her right foot, breaking it.",1
An employee was performing concrete work when they began experiencing heat-related illness.,1
An employee was cleaning a tablet press. The press amputated the tip of the employee's left middle finger.,0
An employee slipped while picking up a food tray and fell to the floor. The employee suffered an injury to the right knee.,1
An employee was driving a utility cart when his left leg was caught between the cart and a post. The leg was broken.,1
A work assist vehicle struck an employee and broke her right femur.,1
"A firefighter suffered a foot laceration while fighting a wildfire, resulting in hospitalizationa and surgery.",1
An employee was webbing paper through the glue unit of a printing press. The employee's hand was pulled between two rollers and crushed.,1
An employee fell backward onto a concrete floor and became lightheaded.,1
An employee was cutting a wall stud with a circular saw. The saw blade hit a knot in the wood; the saw kicked back and amputated the employee's left index fingertip at the first knuckle.,0
"An employee attempted to sit on a shoe bench when she contacted the edge of the bench and fell to the floor, resulting in a fractured hip.",1
"An employee was moving a forklift onto a trailer. His foot was caught between the lift and a pallet, and he suffered broken toes.",1
"An employee was installing reinforcing cables to an automated racking system and fell 18 feet from the platform, resulting in a broken tailbone.",1
An employee stumbled and fell. He was shaking and became unresponsive. The employee sustained heat stroke.,1
"An employee was connecting steel while 20 feet above the ground when they fell off the beam, resulting in injuries that required hospitalization.",1
"On August 27, 2021, an employee was using a hammer to tap a sprocket on the tracks of a skid steer. A metal flake hit the employee's face. The employee suffered a temporary loss of sight in the left eye and was hospitalized.",1
A crew was setting a utility pole when it contacted a primary power line. Two employees were holding the bottom of the pole. One of them suffered first- and second-degree burns to the right toe and heel.,1
"On August 27, 2021, an employee was using a patty machine to make hamburger patties. The employee was straightening a metal mold plate below the knockout cup when the machine amputated the tips of two fingers on the employee's left hand. The machine was not guarded at the time.",1
An employee was standing on the side of a trench when he fell into it along with loose soil. The employee suffered a broken leg/foot.,1
"An employee was operating a tractor when it flipped and ejected him. Its back tire then rolled over him, and he suffered a collapsed lung, broken ribs on the right side, and lacerations to the left hand and right arm.",1
"At 3:30 p.m. on August 27, 2021, a teacher slipped on hand sanitizer that had fallen to a classroom floor. She fell, suffering a broken hip. She was hospitalized and underwent surgery.",1
"An employee was walking next to a vehicle laying traffic cones when the vehicle ran over his right foot, resulting in broken bones.",1
"An employee fell to the floor while trying to sit down, landing on her left side and suffering injuries to the left hip and knee.",1
"An employee was removing a part from under a rotational mold cover, held by a chain hoist about 6-7 feet above the working surface. The chain slipped about 1 foot, after which the load brake activated; this caused the cover to bounce off of the chain hook, strike the employee, and then come to rest on top of him. He suffered multiple fractures.",1
"An employee was lifting a steel flat bar onto rollers to straighten it. The employee's left ring finger was caught between a roller and the bar, causing an amputation to the fingertip.",1
An employee was walking around a stack of tubs when her right toe struck a dolly and she fell to the floor. She suffered a broken left hip.,1
An employee suffered a right thumb amputation while using an upcut chop saw. The saw was guarded at the time.,0
"On August 27, 2021, an employee was operating a pallet jack at a warehouse distribution facility. He was standing in an aisle, trying to reposition the pallet jack to lift another pallet, when the jack's drive wheels spun on the wet floor. The jack then slid toward him, pinning his leg against a pallet of boxes and causing a laceration to the calf. He was hospitalized.",1
"An employee was operating a chop saw to cross-cut out sections of bad wood. While clearing a piece of wood, the saw actuated, contacting the employee's left hand. The employee suffered a laceration to their thumb and index finger, and surgical amputation of the left index fingertip.",0
"An employee stood on the edge of a conveyor to view a jam. When he stepped back down, his left foot slipped and got caught in a roller on the conveyor, resulting in amputation below the knee.",0
"An employee was lifting a casting using a crane when the crane hook slipped off the casting and the casting fell onto the employee's left foot, resulting in multiple fractures.",1
"At 10:30 a.m. on August 26, 2021, an employee was helping unload material from a flatbed trailer. He was standing on product when he tripped and fell, striking his head on the ground and losing consciousness as well as suffering two broken ribs. He was hospitalized.",1
An employee was cleaning a conveyor when it caught the employee's hair. The employee suffered a scalping injury.,1
An employee had been lining up the field for a tractor. The tractor rolled over the employee's leg resulting in a fracture and sprain.,1
Two employees were troubleshooting a pontoon boat motor. The motor began to run and the flywheel of its engine contacted an employee's right middle finger. The employee's fingertip was amputated.,0
"An employee was maneuvering and positioning a vehicle hood assembly on a dolly. The assembly fell and a hood struck the employee's right arm, breaking it.",1
"An employee was walking to the back of a store when she tripped and fell to the ground, resulting in a laceration to her forehead and pain in her wrist. She was hospitalized.",1
An employee was installing a column and a beam from a grated deck that was 15 feet high. The employee fell to the floor through an opening in the grating that was 4x4 feet and had been removed to stand up the column. The employee suffered a broken back that required hospitalization.,1
"An employee fell from a ladder to the floor, suffering a leg injury that required surgery.",1
"An employee was sweeping up broken bottles when she slipped on a plastic bottle and fell, her right leg striking an anchor bolt next to a support plate. She suffered a laceration and fracture to the right knee.",1
"An employee was troubleshooting a bander. As he was trying to move a folded piece of paper in the bander, the strap head caught his left middle finger, causing an amputation. He was hospitalized.",1
An employee was assisting in landing the top of a cut-off H-pile that was being hoisted by a crane. When the piece touched down on the deck it slid and rolled as the employee was moving to another area. The bottom of the H-pile pinched the employee's foot against the top of another H-pile resulting in a broken metatarsal.,1
An employee was walking on a rocky surface and fell backward while picking up a water bottle on the ground. The employee suffered an injury and was hospitalized.,1
An employee was operating a miter saw and amputated two fingers and the thumb on their right hand.,0
An employee tripped and fell while walking.,1
"An employee was inside an elevator when the elevator suddenly dropped and the employee slammed into the floor, resulting in a lumbar transverse process fracture, as well as back, hip, and shoulder pain.",1
An employee's left foot caught a pallet that was on the floor. The employee fell to the floor and suffered a broken right hip. The employee was hospitalized.,1
"On August 29, 2021, an employee was cleaning dough from the roller of a chunker hopper. As he was removing a piece of dough, his left hand was caught by a roller of the chunker machine. He suffered an amputation of the index finger, as well as crushing injuries to the left middle and ring fingers.",1
"An employee fell while climbing down a tree, landing on the ground 10 feet below and suffering a broken lower back vertebra.",1
An employee was working on an extruder barrel heater when he contacted a 480-volt terminal. He suffered an electrical burn to the right little finger.,1
An employee was taking tubes out of a crib with a crane. The tubes slipped and his hand was caught between them. He suffered an amputation to the little finger.,0
"An employee was painting the top of a roof when he fell through a skylight into the machine shop below. He landed on the roof of a truck, then fell to the concrete floor. He suffered leg injuries.",1
"On August 29, 2021, a temporary employee was backing up a stand-up forklift when his left big toe was caught between the forklift and a rail. The toe was amputated.",0
An employee was taking food out of a rethermalizer and putting it into bins when hot water got into her gloves causing second degree burns to her left forearm.,1
"An employee was working to lift and flip a 1,100-pound disc on a table to grind the opposite side. Softeners had been put between the disc and the sling because the disc had sharp edges. During the lift, the softeners slipped out and the nylon sling was sliced by the sharp edges of the disc. The disc then fell onto the employee's foot. The employee was hospitalized with a fractured foot.",1
"An employee fell while climbing over a retaining wall, landing on the ground and suffering a broken wrist.",1
"An employee was trying to raise the mast of a service rig. Something let loose or moved, causing his right hand to be caught. He suffered lacerations to fingers on the hand.",1
An employee was carrying a steel beam for steel sheeting attachments. The employee fell over 17 feet from a steel support beam to a lower level and sustained broken arms and ribs.,1
"An employee was dismounting returned mounted wheel and tire packages. A tire/wheel assembly was secured on the mounting machine, and the employee was trying to engage the bead roller when it struck his face. He suffered a broken tooth, a closed fracture, and a laceration to the lip.",1
"At about 2:50 p.m. on August 30, 2021, an employee was holding a 2-by-4 in place when a nail from a nail gun struck him in the eye. He was hospitalized.",1
"An employee was constructing a platform for a film set. The employee was standing on the platform, when he lost his footing and fell about 10 feet to the cement floor, landing on his left side. The employee was hospitalized with fractures to his left arm and pelvis.",1
An employee was working on a casting in the welding department. A fork truck backed into his right leg causing a severe laceration that required surgery and hospitalization.,1
"On August 30, 2021, an employee was opening the door to a pallet magazine while operating a forklift. As the employee backed up the forklift, the employee's fingers were pinched between its frame and the magazine door. The employee suffered a fingertip amputation.",0
An employee was cutting open shrink wrap using a box knife. The knife slipped and amputated his left little finger.,0
An employee had been performing roofing work and was hospitalized with a heat-related illness.,1
"A driver was preparing to unload a tanker trailer into a customer's silo. When the driver removed a cap from the customer's air supply, pressure caused the cap to hit the driver's right leg. Their right leg was broken and lacerated.",1
"An employee was loading a trailer with a forklift. The product shifted and some items fell off the pallet that was on his forks. After he dismounted to pick up the product, the forklift's parking brake failed and the forklift rolled forward. The forks pinned his right ankle to the pallet, causing multiple fractures to the ankle.",1
An employee was installing a chain onto a brick conveyor when his finger was caught and amputated between the chain and sprocket.,1
"Employees had been replacing a conveyor roller. When the conveyor was restarted, an employee's gloves were caught in the chain resulting in amputation of the right index fingertip.",1
An employee was pulling a loaded patient gurney through the woods when their right little fingertip was caught and amputated between the frame of the gurney and a large rock.,0
An employee was removing a piece of wood from a conveyor. The conveyor caught and fractured the employee's right arm; the employee was hospitalized.,1
"An employee was working with a wrench. The employee fell backward into a valve, suffering an injury that required hospitalization.",1
"An employee slipped on a metal pan and fell to the ground 16-20 feet below, suffering a compression fracture to the pelvis and bruised lungs.",1
"An employee was using a powered pallet jack to move product. The stabilizer/drive wheel lost contact with the floor. When the wheel caught traction, the employee's lower right leg was pinned between the jack and the wall. The employee suffered a compound fracture to the lower leg.",1
"An employee tripped and fell, suffering a broken leg.",1
An employee was driving a forklift when the back of her heel was crushed between the forklift and a steel roof beam. She suffered an injury to the left ankle and Achilles tendon.,1
"An employee was loading pallets on a pallet truck. The pallets fell and landed on the employee's right hand, amputating the index finger.",1
"An employee was on his second SCUBA dive of the day, stacking tires for removal from the seabed of a failed artificial reef. He developed vertigo and nausea, which worsened when he surfaced. He was hospitalized, suffering from decompression sickness.",1
"On August 30, 2021, an employee was unpacking and redistributing assembly materials. He used a scalpel to cut the banding on a bundle of vertically placed steel L-profiles. The L-profiles then fell over and onto the employee. The employee was hospitalized with fractures to both legs.",1
"An employee was at a well site, adjusting studs in a tubing head with a blowout preventer and the tubing head in the air. The blowout preventer twisted and the employee's finger was crushed between the nut and the backup. The employee suffered an amputation to the finger.",1
"An employee was adjusting a circuit breaker from an elevated manlift. The employee fell from the manlift, landing about 20 feet below and suffering a fractured back bone.",1
"An employee was walking to pick up materials when he slipped and fell onto a wooden board. He suffered a puncture wound to the right side of his head, caused by a nail that was sticking out of the board.",1
"On August 30, 2021, an employee was operating a stationary electric bandsaw when the saw blade amputated the employee's fingertip.",0
An employee was leaving a store when a gust of hurricane-level wind picked her up and tossed her to the ground. She suffered a broken hip.,1
"Two employees were working on a 600-amp breaker. One employee suffered an electrical shock and burns to his face, head, upper torso, and his left hand due to an arc flash.",1
"On August 30, 2021, an employee was using a cut-off machine to cut a PVC pipe when his T-shirt got caught between the guard and the blade, pulling the saw back into his right shoulder. The employee suffered a laceration to his right shoulder and lower arm pit area, requiring hospitalization.",1
"An employee was on a ladder, putting ceiling tiles back in the grid in a loading dock area. The loading dock's garage door then opened, and the employee jumped from the ladder to avoid being struck by the door. He suffered a broken ankle.",1
An employee was inspecting a Utility Task Vehicle (UTV). The employee topped off the coolant and started the UTV. He then went to the front of the UTV to check for a coolant leak. The UTV lunged forward pinning the employee against a building. The employee sustained fractures and contusions to their femur(s).,1
An employee was hanging a ladder on a ladder rack in a trench box when the ladder slipped from their grip and pinched their finger between the ladder and ladder rack. Their left middle fingertip was amputated without bone loss.,0
An employee was opening a pocketknife when it stabbed the employee's left thigh.,1
"An employee was operating a stand-up reach forklift in a warehouse. The forklift struck a guardrail and ejected the employee, who landed on the floor and suffered multiple rib fractures, a lung issue, and muscle damage around the hip.",1
Employees were at a site to remove old glass from a building and install new glass when it began to rain. An employee was stowing a lift when he stumbled over a curb/curb bumper and dislocated his knee.,1
"An employee was climbing down an A-frame ladder when his foot slipped on a rung and he fell to the floor, breaking his ankle.",1
"On August 31, 2021, an employee was running an extruder. As the employee used a metal spatula to scrape built-up extrudate from the chill knife, he lost his balance and his little finger was caught in the rollers. The fingertip was degloved.",1
"An employee was removing pieces of metal from a shearing machine. While clearing some film coating, the shear contacted his right hand, partially amputating the ring and little fingers.",0
"An employee was checking temperatures with his pallet jack parked behind him. A reach truck came around a corner and struck the parked pallet jack, which rolled onto the employee's legs and knocked him to the ground. He suffered an ankle dislocation and a hairline fracture.",1
"An employee was using a pallet jack to move ice cream in the warehouse. When they made a right turn, the pallet jack struck a bollard. The employee sustained a fractured pelvis.",1
"While moving from a fixed ladder to a roof, an employee slipped and fell. The employee landed on the concrete ground about 15 feet below and suffered a dislocated elbow, a broken wrist, a dislocated knee, multiple broken ribs, and cuts to the chin and head.",1
"While handling the hydraulic lines of an excavator, an employee's hand was lacerated and injected with hydraulic fluid. The employee was hospitalized.",1
"On August 31, 2021, an employee was removing a bolt in order to remove a section of some scaffolding. A scaffold fell off a nearby forklift and landed on the employee's left leg, causing multiple fractures. The employee was hospitalized.",1
"Two employees were working on a metal brake. The brake was closed on one employee's right thumb, crushing it and resulting in an amputation injury.",0
An employee was installing a roll of tape on a strip roller machine. Their right middle finger was caught and amputated in the machine when it cycled.,0
"An employee was installing cable service in an attic. He fell through a sheet rock ceiling, landing about 9 feet below and suffered a broken right kneecap.",1
"An employee fell from a roof to the cement driveway below, suffering a broken wrist and cuts to the chin and elbow.",1
"While working from the bucket of a bucket truck to replace residential telecommunication lines, an employee contacted energized 720V overhead power lines. The employee received electric shock injuries including burns and an amputation to the left arm. The employee was hospitalized.",1
A temporary employee was sorting/stacking blocks on the conveyor line. A chunk of concrete got stuck between the conveyor and a dead roller. The employee went to remove the chunk of concrete.,0
An employee was walking near a pallet stacking machine when a stack of pallets fell on him. The employee sustained head trauma and cuts.,1
"While walking across the break room, an employee tripped on a broken floor tile and fell to the floor. The employee sustained head trauma.",1
"An employee was helping an equipment operator move a guide back into position. The employee's right foot was caught under the ram on the equipment when it was lowered, which caused an amputation to the toe about 1/4 inch from the tip. The employee was hospitalized.",1
An employee was walking down the stairs in a client's apartment when he slipped and fell down the stairs. The employee sustained three fractured vertebrae and bruised ribs.,1
"An employee operating a forklift turned a corner and the forklift struck a pallet that was loaded on an unattended, parked forklift. The employee was hospitalized with a broken leg.",1
"While walking inside the hospital, an employee slipped on food waste and fell to the floor. The employee was hospitalized with a fractured patella.",1
An employee was helping to move a desk when they tripped an fell. The employee was hospitalized for a broken pelvis.,1
An employee fell off the fourth rung of a 6-foot ladder while conducting maintenance on an airline.,1
An employee was accessing the top of a shipping container using an extension ladder when he fell and sustained a fractured wrist.,1
An employee was working on a 1-inch ball control valve when it caught and lacerated his left index finger. The fingertip was amputated.,0
An employee had been setting up before entering a manhole. He became overheated and was later hospitalized with dehydration.,1
An employee operating a radial arm saw was drawn into the saw and sustained a severe laceration to the arm.,1
An employee was working on a pumping unit. The employee's left middle and ring fingers got caught in the sheave and belt on the pulley system of the pumping unit resulting in fingertip amputations.,0
"An employee was using a hose to spread a lightweight mixture on the roof of a building when he began to suffer symptoms of heat stress, which included cramps, and was unable to move. The employee was hospitalized with heat exhaustion.",1
"An employee was installing a window screen outside a two-story house. The ladder he was on fell, and he fell with it, landing on the ground and suffering bruising to a back vertebra, a broken elbow, and multiple body bruises. He was hospitalized.",1
An employee was backing up a forklift when it struck a warehouse guardrail. The employee suffered a compound fracture to the lower right leg and was hospitalized.,1
"On September 1, 2021, an employee was selecting an order using a pallet jack. As he went to pass another pallet jack, his upper torso contacted a rack resulting in a broken clavicle and broken ribs. He was hospitalized.",1
An employee was walking on the concrete sidewalk in front of the lobby door when she tripped and fell onto the sidewalk dislocating her right shoulder.,1
"An employee fell down stairs, from the second floor to a landing between the first and second floors, in a parking garage. The employee suffered a dislocated and fractured right ankle.",1
"An employee was operating a forklift. As he turned a corner, his foot was caught and crushed between the forklift and poles.",1
"An employee fell from the side of a platform, landing on the ground about 4 feet below and suffering a back fracture.",1
"An employee was walking on top of floor joists, proceeding back to finish installing the joist hangers. The employee lost his balance when he stepped on an unsecured floor joist and fell approximately 20 feet to the floor. He sustained a back injury.",1
An employee was loading a trailer when the tension cable wrapped around their right thumb and amputated it.,1
An employee was carrying empty milk crates down a set of fixed stairs. The employee slipped and fell down about 10 steps. The employee was hospitalized with a head injury.,1
An employee was using an emery cloth to polish a shot pin in a lathe. The cloth caught on the pin and pulled the employee's hand into the lathe. The employee suffered fractures to the hand and fingers.,1
An employee was removing a sled attachment from his pallet jack. The sled fell on his right hand resulting in amputation of his middle fingertip.,0
An employee was splicing internet cable from a ladder. The employee fell from the ladder to the ground 19.5 feet below and suffered broken ribs.,1
An employee was cleaning the edge of a pool when she fell in and suffered a broken ankle. She was hospitalized.,1
"While instructing a new employee, the injured employee was struck by a triple pallet jack and sustained a fractured ankle.",1
"An employee was cleaning a liver harvest machine. While removing liver/gizzard parts from a plastic auger, the rotating auger amputated his right index fingertip.",0
An employee working in a warehouse began having cramps throughout his body. The employee was hospitalized for dehydration.,1
"An employee was securing a ladder to the upper roof with a bungee cable. The bungee cable snapped, causing the feet of the ladder to move. The employee fell with the ladder and sustained a broken arm.",1
An employee was cutting a plastic tray on a table saw when their hand was cut by the saw.,1
"An employee was disassembling a manhole cover lifter to be loaded into a work van. As the employee was removing the magnetic attachment and bent over to pick it up, the long handle fell down, hitting the employee on the head. The employee suffered a concussion.",1
An employee tripped and fell on a raised area of the floor and sustained a fracture to their femur.,1
An employee tripped over a cart corral while pushing a cart. The employee suffered a spinal cord injury.,1
"Roof trusses fell while they were being installed, striking an employee and breaking the employee's left arm.",1
An employee was hospitalized for an allergic reaction to flowers delivered to the emergency room.,1
An employee was struck with a hand tool used by another employee and suffered a knee injury.,1
"An employee was removing cases from the side door of the freezer section of a trailer. He fell approximately 4 feet from the trailer deck to the asphalt parking lot, landed on his back, and suffered three broken ribs and an injured tailbone.",1
An employee was transporting a trunnion from a kiln on a forklift when the trunnion rolled off. He stopped the forklift and went to stop the rolling trunnion. The trunnion rolled onto his right hand causing crushing injuries.,1
"An employee was shooting brads into the top of a house. The brads came in sleeves, held together by plastic fasteners designed to fall off when the gun was fired. As it came off, one of these plastic fasteners struck and injured his left eye.",1
An employee was standing on the side of a road after a vehicle incident. Another vehicle swerved and hit the employee.,1
"An employee was hoisting an 18-inch, 6-foot wooden work platform from the ground to a height of 12 feet. The cleat used to secure the rope failed causing the platform to fall 2-3 feet. The employee sustained fractured vertebrae.",1
"An employee was taking a break by a baghouse after shoveling hot pellets that were being expelled from a cooler. While the pellets were still being expelled from the cooler hopper, a flame shot out of the discharge pipe, then backdrafted up the pipe into the cooler and then into the bag house. The employee suffered burns to the hands and arms from the resulting explosion.",1
An employee was troubleshooting a vacuum system when a pneumatic cylinder actuated and struck his right index finger. He was hospitalized and suffered an amputation.,1
"The injured employee was standing by a bag house that that was approximately 27 feet away from where a discharge pipe was discharging wood pellets. A fire came out of the pipe and back flashed through a cooler and back through the piping system to the bag house where an explosion occurred. The employee sustained burns to the arms, neck, and torso.",1
"The injured employee was parked in a tugger. A reach truck driver was relocating a container that was behind a stack of containers. The forks came into contact with the stack of containers, tipping it over onto the injured employee's tugger. The injured employee was hospitalized with lacerations to both hands and the right side of their face.",1
An automated guided vehicle (AGV) was transporting a pole. The pole struck the injured employee in the chest.,1
"An employee was moving 4-inch pieces of solid round material, cradled in a sling. The employee's right middle finger was pinched between two pieces of the material and partially amputated.",0
"A commercial jet aircraft crashed into the northwest corner of the facility and a fire resulted. An employee inside the facility sustained burns to his head, neck, and back.",1
"An employee was working from a scaffold about 20 feet high, installing snow rails on a standing seam roof. He fell through the guardrail/toe board opening at the scaffold's ladder access, landing on a railroad timber on the ground. He suffered a broken left femur.",1
An employee was pushing expanded metal material through a leveler when the glove on their left hand became caught on rollers. Three left hand fingers were crushed in the rollers. The employee required medical amputation of the index finger to the proximal joint and amputation of the middle finger to the middle joint. The left ring finger and thumb were lacerated.,1
"An employee was retrieving a broken part from an automation machine when the machine actuated and broke his right index finger. He was hospitalized, undergoing surgery.",1
An employee was spreading gravel on top of a building when a mini loader drove onto his leg and broke it.,1
"An employee was installing a conveyor belt. While he was under it, the conveyor roller pulled in his safety vest and left arm. The arm was broken. The employee was hospitalized, undergoing surgery.",1
"An employee lost his balance while getting into a vehicle, fell backward, and hit his head on the pavement. He suffered a head contusion and was hospitalized.",1
"An employee was trying to push trash off the sill of a hopper. The cart tipper was activated, and as it rose it pinched the employee's left hand against the sill. The employee's little fingertip was amputated.",0
An employee was mounting a tugger and engaged the throttle. The tugger spun backward in a circle and pinned her left leg against a short beam and desk which resulted in fractures to the leg.,1
"An employee was tripping pipe on a drilling rig. His right hand was caught with the drilling rods in the hole as the rods were being unscrewed, and his little finger was amputated.",1
"An employee was helping another employee with a roll of cured tread that had fallen over in a storage rack. Another roll of tread fell and hit the employee, who suffered a back injury.",1
"An employee was replacing a broken hasp on a gang box. Combustible vapor from a 10-cubic-foot low-pressure acetylene cylinder in the box ignited. The employee suffered multiple burns, a head laceration, and a fractured arm, cheek and nose.",1
"At about 2:15 p.m. on September 3, 2021, employee 1 was assisting in the placement of the jib extension back onto the cradle position for transport. Employee 1 was standing on the work platform near the crane cab. Employee 2 was at the front of the crane where the jib extension was secured to the crane itself. Employee 3 was on the ground at the front of the crane. The crane operator was inside the cab. Employee 2 attempted to free the extension from the crane itself and  knocked out the remaining pin securing the extension. This action caused the extension to fall from the crane. The falling extension may have struck employee 1 before he fell to the ground below the work platform. Employee 2 was knocked off the ladder and also fell to the ground. Employee 1 sustained a shoulder fracture and contusion.",1
"An employee was adjusting straps for a sheetrock truck. While moving to step off the truck, the employee stepped on a board that snapped, causing the employee to fall to the ground. The employee suffered a back injury.",1
"An employee was changing an oil filter on a material handler while standing on the tire of the material handler. The tire rotated, causing the employee to lose balance and jump three feet to the ground below. The employee sustained a broken foot.",1
"An employee was cleaning carpet pieces using a pressure washer. High-pressure water hit the employee's left hand, cutting the top of the hand.",1
"While dispensing icing into a container, an employee went to unclog some of the material from a mixer. A rotating shaft inside the mixer caused an amputation to the employee's right index finger.",0
"On September 3, 2021, an employee was troubleshooting an extruder take-away conveyor. As the chain and sprocket was rotated, it pinched the employee's right index finger and the sprocket's teeth lacerated the employee's fingertip. The fingertip was medically amputated.",0
"An employee was stacking racks for transporting insulated glass units. He was placing the fourth rack on top. It failed to settle onto the pins at first, then fell into place when bumped. It crushed the tip of his right little finger, causing a fingertip amputation.",0
"An employee was putting on a cleanroom suit. When he stood up, he slipped and twisted his left ankle resulting in a fall and a fractured ankle.",1
An employee was troubleshooting an applicator roller on a can printer. The roller activated and pulled in the employee's right hand. The skin was torn off the hand and palm and the little finger was crushed.,1
An employee had just lowered a bundle of scaffold frame to the ground with a crane. He released the chains from the bundle and was walking away when the scaffold frame fell onto the back of his right arm and his right little finger. The fingertip was amputated.,0
An employee was assembling an irrigation unit when a metal support bracket fell and pinched their right index finger against a metal bar. The fingertip was amputated at the first knuckle.,0
"An employee was using a brake press to bend metal for production. The press caught the employee's right thumb, removing the fingernail and flesh about a quarter inch from the thumb tip.",0
"An employee slipped and fell on wet ground, suffering a laceration to the right side of the face. The employee was hospitalized for stitches and additional surgery.",1
"A cooling tower fan had stopped working. The breaker feeding the fan had been turned off, and an employee was investigating the problem with the fan. The subpanel was connected to a variable-speed motor; a circuit overloaded and an arc flash burned the employee's left arm, forearm, and hand.",1
"An employee was operating a reach truck. During a turn, his left foot was crushed between the vehicle and the yellow upright bumper guard of some racking.",1
"On September 3, 2021, an employee was climbing down a 6-foot A-frame ladder after cleaning an AC drain. He lost his balance, fell, and hit his head on the top of a cubicle wall. He suffered a head injury and was hospitalized.",1
"An employee was installing a bus exhaust system. When the exhaust slid into place, the employee's arm was lacerated by the exhaust shield. The employee was hospitalized.",1
"At about 10:00 p.m. on September 3, 2021, an employee was climbing down an approximately 6-foot A-frame ladder after painting air conditioning vents on a ceiling. One of his feet got caught and the other left the ladder at the third or fourth rung, resulting in a compound fracture to the left ankle.",1
An employee's knee struck a table as the employee was standing up from a chair. The employee fell to the floor and suffered a broken hip.,1
"Employees were trying to close a stuck sliding door. An employee's left hand was jammed between the two doors, causing a partial amputation to the little finger.",0
"On September 3, 2021, an employee was trying to lift open a metal-framed window. The window slammed down and amputated the employee's right ring fingertip.",0
"An employee was polishing a 3/4"" x 13 1/4"" steel shaft in a lathe using emery paper. The emery paper got caught around the workpiece and the employee's right ring finger was amputated.",0
An employee was operating a jib boom with an aluminum hand controller. The controller shocked the employee.,1
"An employee was using a jib crane to move a pallet of brick into a ladle. The pendant controller shocked him. He was unable to release his right hand from the controller and slowly fell to the floor of the concrete platform, suffering a chipped bone in the left shoulder and a sprained right ankle.",1
"Employees were installing grounding tools as part of an addition to a compressor station. An employee was hammer-drilling a ground rod when the edge of a trench failed; the employee slipped, fell, and landed on the rod, which impaled his inner thigh.",1
"An employee fell while walking out of a kitchen. The employee's side struck the floor, and the employee suffered an injury to the shoulder, back, and side. The employee was hospitalized for hip surgery.",1
"An employee was scanning a patient's wrist band when her foot was caught in the loop of a bed lift. She tripped and fell to the floor, shattering her elbow and hitting her head.",1
"An employee was loading cardboard boxes onto a bailer. When the employee closed the bailer's gate, the bailer caught the tip of the employee's finger. The fingertip was amputated.",1
"An employee was unloading animal feed from a trailer through an auger. The feed got plugged, and the employee was clearing the auger when his left hand was caught in it. He suffered an amputation to the middle finger.",0
"On a vessel, an employee stepped into an open manhole and fell to the deck. The employee sustained fractured ribs and a collapsed lung.",1
An employee was operating a table saw. The wood kicked and a shard of it pierced the employee's abdomen.,1
While walking in the storeroom an employee tripped on a drying rack and fell on the floor breaking her right hip. The employee required surgery.,1
"The employee was helping load seed into a seed spreader. The employee was injured when they stepped on a tire that moved, which caused them to fall.",1
"An employee was putting a metal cover on a frame belt. An end of the cover got caught on some frames passing underneath, causing the cover to pinch the employee's right little finger and ring finger. The little finger was amputated just below the nail.",0
"An employee was driving an electric bag tug from one airport concourse to another. While turning right to enter a bag room area, the employee's tug collided with another tug. The employee suffered two broken ribs on the left side; a lacerated spleen (with internal bleeding); and contusions and abrasions to the left side of the head, forehead, left knee, and left arm.",1
An employee who works on the beach renting personal water craft (PWC) and kayaks sustained heat stroke.,1
"An employee was replacing a 3-inch belt that had fallen off a flywheel. When he placed the belt back on the flywheel, the spinning wheel caused his left hand to be pulled into a pinch point. He suffered amputations to the index and middle fingers.",1
An employee was operating a pallet jack to select product for an order. The employee was maneuvering the pallet jack around a steel bollard in the warehouse when his feet were pinned between the bollard and the pallet jack resulting in a right foot fracture and a laceration on the left foot requiring stitches. The employee was hospitalized.,1
An employee was working in a kitchen area when a pot caught fire. The employee suffered third-degree burns to the right arm while moving it.,1
"An employee was cutting bone-in ribeyes on a meat saw. A piece of meat twisted and pulled his right hand into the saw, which amputated the tip of the thumb and lacerated the index finger.",0
"An employee was in a trailer, using an electric pallet jack to realign a pallet of product that had shifted during shipment. The employee was caught between a pallet and the jack's handle; the employee suffered a laceration and/or puncture to the lower abdomen.",1
"An employee opened a dryer to take clothes out and her finger got caught in the machine, likely the dryer's door. The employee sustained an amputation to the right index finger.",1
"An employee was at the extruder pushing pipe down the line. As the employee was manually positioning a piece of pipe that was being heated, his finger was caught in an unguarded rotator chain resulting in an amputation.",0
"In the early morning of September 6, 2021, an employee was traveling on a powered cart when its front passenger tire contacted a handrail post on the side of the roadway. The cart tipped onto its left side, and the employee suffered a laceration to the lower left leg and multiple fractures to the right ankle. The employee was hospitalized.",1
"An employee was trying to remove an automobile floor mat from a rug beater machine. The side service panel had been removed from the machine so she could diagnose a possible issue with the machine. The mat came free, and her right hand slipped into the path of the machine's chain and sprocket. Her right index finger was amputated at or near the first knuckle.",0
An employee was breaking down a skid on the dock. The employee tripped on the corner of the skid and fell face-first onto the concrete ground. The employee's knee was fractured.,1
An employee was helping connect tubing on a hydrowalk. His middle finger was pinched between the tubing and the hydrowalk. The finger was amputated.,1
"An employee was trying to slide a work platform back into its housing. His middle finger was caught between the midrail and the side safety gate of the platform. The pad of the finger was severely lacerated, and was medically amputated.",0
"On September 7, 2021, an employee was using a utility knife (in his right hand) to open a floor box containing an electrical enclosure. When he swung the knife upward to cut through the tape, it lacerated his left wrist. He was hospitalized.",1
The injured employee was working in a two-person team conducting troubleshooting and repair of an onboard boat engine. The engine started and the injured employee's right index fingertip was amputated. The cowling guards had been removed to provide access to the engine components.,1
"An employee was investigating a possible malfunction in a vacuum cleaner system for removing powder paint from paint booths. While his right hand was in the discharge outlet of a rotary airlock valve on a dust collector, the blade inside the valve caught his glove and pulled his hand further in. He suffered partial amputations to two fingers, losing half of each one.",0
"An employee was troubleshooting a dock plate on the loading dock with other maintenance workers. When the lockout pin on the dock plate was removed, the plate fell down and caught the employee's left leg. The employee sustained a compound fracture of the left femur and a head laceration.",1
An employee was using a spray hose to clean conveyors when her forearm became caught in a conveyor belt. Skin was removed from the forearm.,1
An employee was moving from a scaffold ladder to the scaffold platform when he fell to the ground 15 feet below. He suffered a broken right wrist and broken ribs.,1
An employee was loading a press machine when their left forearm was struck and lacerated by the sheet of corrugated metal that was being loaded. The laceration resulted in tendon damage.,1
"An employee was adjusting a car lift arm when the lift arm raised up, pinning the employee's hand between the lift arm and a car. The employee sustained fractures to the hand.",1
"An employee was cleaning debris in a confined space (vault). Electric power surged through wires, and the employee was burned.",1
"An employee was starting her shift at the fuel station. She walked past a person that had a dog carrier attached to their bicycle. The dog was on a leash, but it jumped out of the carrier and bit the employee's left arm. The employee was hospitalized and required surgery.",1
An employee was replacing a conveyor belt when his right hand was caught between the belt and the sprocket. His hand and fingers were crushed in the sprocket and he was hospitalized.,1
"An employee was standing in a bike lane, using a backpack leaf blower to blow grass off a street onto the sidewalk. A passing car struck the employee, who suffered a broken left arm and left foot.",1
"At 4:00 p.m. on September 7, 2021, an employee stepped on a nail that punctured his right foot. He was hospitalized, requiring surgery to remove the nail.",1
"At about 4:30 p.m. on September 7, 2021, an employee was guiding plastic material into a winding machine for an operator. The machine pulled in the employee's hand and broke it. The employee was hospitalized.",1
An employee was unloading product from a truck when they slipped and fell from the liftgate of the truck onto the concrete parking lot. The employee was hospitalized with a broken left wrist.,1
"An employee was maneuvering around a pallet when her foot hit the corner and she fell to the ground. As she tried to brace herself, her left arm struck against another pallet of rolled plastic and her left humerus was broken.",1
An employee was lowering the landing gear of a trailer. The crankshaft lacerated the employee's face.,1
A temporary employee was standing on a rider jack as it left one aisle and entered another. The employee could not slow down the rider jack fast enough and jumped off. The employee's left leg was crushed between the jack and an upright.,1
An employee was winching cages down to a drop-deck live-haul trailer. The terminal tractor moved in reverse and the employee was pinned between the fifth wheel and the trailer kingpin area. The employee suffered multiple fractures and lacerations.,1
"An employee was trying to remove a stuck pin on a loading dock. The employee fell off the loading dock about 3 feet to the pavement below, suffering a broken right tibia and fibula.",1
"A forklift struck an employee with its forks, injuring the employee's right leg.",1
"A forklift's fork struck an Amazon employee in the right leg, causing a contusion and a cut and possibly necessitating the medical amputation of the right foot.",1
"An employee was using a saw to cut off a casting. The saw blade contacted the employee's left thumb, causing an amputation to the thumb.",0
An employee had been washing dishes. The employee's right leg gave out and she fell.,1
"An employee was walking between two registers. As she stepped over a chain separating the register areas, her back foot caught the chain and she fell to the ground. She suffered a broken pelvis and was hospitalized.",1
"An employee was starting up machines after a holiday. Noticing a jam on the powder feed system, he tried to remove a valve. The butterfly mechanism in the valve closed and amputated the tip of his right middle finger.",1
An employee was trying to set a bucket of tools and parts into a modular apartment. His right foot was caught under a caster/wheel that the apartment rolled on. He suffered two broken toes and a wound that required 25 stitches in his right foot; he was hospitalized.,1
An employee was hospitalized due to an infection of the left foot caused by tight boots.,1
An employee was walking down a vacant hallway when they fell on the wet floor and fractured their hip. The employee was hospitalized.,1
"An employee was backing up a forklift. As it turned, his right upper arm was pinched between it and a material storage rack. He suffered a deep tissue avulsion above the elbow.",1
An employee was moving a 96-gallon residential cart when chemical fluids spilled out of a bottle onto his left arm. The arm was burned.,1
"On September 7, 2021, an employee had adjusted a chain link fence and was standing next to the fence. A forklift moved towards him and crushed his right hand against a fence pole. The employee was hospitalized.",1
An employee was replacing springs on a pallet labeler when his foot got caught in the pallet rollers on the line. The employee sustained fractures to his foot and toes.,1
"An employee was rigging a cable on a roof. He fell through a skylight, landing on a car about 15 to 20 feet below and suffering a concussion and a broken femur.",1
"An employee tripped and fell in a hallway, striking her head on the floor and suffering a head injury.",1
"An employee had been backfilling a previous excavation. As the employee walked along the duct bank, a portion of a steel support plate shifted and crushed the employee's leg. The employee's left femur was fractured.",1
"An employee was going to clean a patient room. She turned to walk into the room, lost her footing, hit the door jamb, fell on her knees and then onto the floor. The employee sustained a fractured right humerus.",1
"An employee had just installed a temporary PVC bypass pipe to flush a system. The pipe was connected to hot water, and the water melted the glue joints on the pipe. Hot water sprayed onto the employee's chest and burned it.",1
An employee had been working on a pool and was feeling unwell with heavy breathing and muscle cramps. The employee was hospitalized with a heat illness and dehydration.,1
"An employee was in a tree, cutting off the top. The tree shook and the employee's safety line hopped over where the cut was made. The employee fell to the ground, suffering pelvis and rib fractures and a spine injury.",1
"An employee was walking back to her office, carrying three bottles, when she tripped and fell over a floor tile that was missing a piece. She fell on her right knee, left arm, and left elbow; she was hospitalized, requiring surgery to the arm.",1
Employees were repairing a guardrail system which had been damaged by back-fill soil material. A skid-steer was removing soil from the guardrail system while the injured employee was pulling a stanchion out and away from the skid-steer bucket. The bucket caught the employee's right index finger against the stanchion; the fingertip was amputated.,0
An employee was unloading wooden utility poles. A pole was put on ground by a front-end loader. The pole then rolled downhill onto the employee's leg fracturing the tibia and fibula.,1
An employee was rolling up a water hose next to a steam filler. Hot water came out of the steam filler and burned his shoulder and chest.,1
An employee was running to climb onto a truck. The employee slipped and the truck ran over their foot.,1
"An employee was mudding the door on an oven. The employee fell approximately 15 feet from the mud cart to the concrete floor on the next lower level. The employee sustained fractured ribs, thoracic spine, and teeth.",1
"An employee was walking in the store parking lot when he tripped or lost balance and fell to the ground, injuring his hip.",1
An employee was cutting product on a chuck saw when the saw amputated the tip of their right thumb above the fingernail.,0
An employee was unloading a generator. The generator slipped from his hands and fell on his right ring finger. The fingertip was medically amputated.,0
"An employee was cleaning a conveyor belt. The belt caught the employee's left hand and arm, breaking the arm. The employee was hospitalized.",1
A nurse was performing a restraint on a combative patient and sustained a tear to his quadriceps that required surgery.,1
"While leaving a room, an employee tripped on folded mats outside the door and fell to the floor, suffering a broken hip.",1
An employee was changing the belt on a pulley system that turned a blower fan. His right middle finger was caught between the belt and the pulley and amputated below the nail.,1
"An employee was operating a battery-operated pallet jack. As the jack turned a corner, the employee fell. She struck the concrete floor and the racking, suffering a right pelvic fracture, a left sacral fracture, and a fracture to a lower-back vertebra.",1
"An employee was replacing high hats when he was shocked by electricity and fell from the second step of a ladder to the ground. In addition to being shocked, the employee sustained a leg injury and was hospitalized.",1
An employee was cleaning a food preparation machine. A blade in the machine lacerated her right index and middle fingers resulting in partial amputation.,1
"An employee was standing in a laundry area, in front of a washing machine, after emptying a plastic bag of laundry into the washer. The employee dropped the bag, slipped on it, and fell. Her right hip struck the concrete floor and the metal threshold of a doorway. The hip was broken and she was hospitalized.",1
An employee was watching an oven roller as part of the manufacturing process when their right index finger was caught in a pinch point resulting in a fingertip amputation.,0
An employee fell from a ladder and was hospitalized for surgery.,1
"An employee was pushing a newly cut section of beef down a conveyor belt. A hook, used to reach and hold the piece in place, did not release when the employee pushed the piece down the conveyor. The piece of beef then pulled the employee off balance. The employee's right hand slipped into the sawblade, which amputated the index finger.",0
"An employee was deburring a 1-inch carbon steel pipe on a lathe for weld practice. The employee was polishing the outside diameter of the pipe using emery cloth. The employee was straddling the pipe, with one hand on each end of the cloth, when the rotating pipe pulled in the employee's glove and right hand. The employee's right index finger was amputated at the first knuckle.",0
"An employee bent down between two stacks of pallets to inspect a packing slip on a pallet on the floor. When she stood up, her back struck the edge of a wooden pallet and was injured.",1
"While climbing a 5-foot ladder, an employee fell 3 feet to the floor and sustained injury to his shoulder, wrist, and right leg.",1
"An employee was on a ladder, replacing the motor of a fan box in a classroom. He lost his balance, fell from the ladder to the carpeted concrete floor, and suffered a compound fracture to the right ankle.",1
An employee fell from a 6-foot step ladder while installing a monitor and sustained an injury requiring hospitalization.,1
"On 9/08/2021, a concrete truck driver was repairing a rear light approximately 7-8 feet above the ground. He lost his grip and his hand got caught between the roller and the drum. He lost a fingernail and required amputation to the right ring finger.",0
"An employee was adjusting an encapsulating tabulating machine press. The machine activated and came down on the employee's right hand, amputating the middle fingertip.",0
An employee was opening boxes with a safety knife. The knife lacerated the inside of the employee's left wrist.,1
An employee was using a pair of scissors to open a bag containing an ink cartridge for his printer. The employee sustained an amputation to the left middle fingertip without damage to the fingernail.,0
"An employee slipped and fell down stairs, suffering a broken ankle.",1
An employee suffered an amputation and was hospitalized.,1
An employee was working with a 50-ton swage machine pressing metal beads onto wire rope. The employee was using an Allen wrench to position the part between the dies when the machine closed on their right index finger resulting in a fingertip amputation to the first knuckle.,0
"While pushing hindquarters through a band saw, an employee's left index fingertip was amputated.",0
An employee fell into a hole covered by a piece of plywood that broke. The employee landed 10 feet below and suffered a broken right leg.,1
"On September 9, 2021, an employee was taping house wrap onto the outside of a two-story residential home. The employee fell 15 feet from a ladder and sustained injury to their head and back.",1
An employee was moving boxes and began to feel severe chest pains. The employee was hospitalized for possible heart issues.,1
"An employee was stepping onto an electric pallet jack when it activated, jerked, and pinned his leg against a stack of pallets. He suffered a compound fracture to the lower left leg, at the ankle, and was hospitalized.",1
An employee went out into the parking lot of the establishment to confront a client that was told to leave. The client got into his vehicle and used it to strike the employee. The employee sustained a concussion and possible brain bleed.,1
An employee fell off a golf cart and hit his head on the ground. The employee was hospitalized with a head injury.,1
An employee was transferring supplies to another store and was struck by a customer's car.,1
"An employee was installing a portable weather station for use against a wildfire. The employee slipped on a moss-covered rock and fell to the ground, suffering a broken right femur at the ball joint.",1
"Employees were securing a 40-foot ladder to the trim of a building. The extension portion of the ladder descended, causing an employee on the ladder to fall to the ground 8 to 10 feet below. The employee suffered a shoulder and back injury.",1
"An employee was unloading a metal cart of parts. A door hinge closed on the employee's left middle finger, amputating the tip.",0
An employee was standing behind another employee who was tightening the blade on a bandsaw. A piece of metal from the tensioner spring bolt struck the employee in the knee.,1
An employee was repairing a patch in a grain trough that spans across from the corn bins to the steam closets. The employee reached under the trough to clean out some corn. His right middle finger got caught where the patch was going and he sustained an amputation at the nailbed.,0
An employee's thumb was caught in a radiator fan and lacerated.,1
"The injured employee was unloading a truck and staging materials while flagging/directing a forklift. As the operator shifted the load, the forks of the forklift bumped a steel beam that was staged on top of wood dunnage. The beam shifted and fell onto the injured employee's left foot. The employee sustained 15 fractures to his foot that required hospitalization and surgery.",1
An employee was pinned between a forklift and a metal door. The employee was hospitalized and required surgery.,1
"On 9/9/2021, an employee was inspecting an array for defects when he was bitten on the leg by a snake.",1
Employees were removing components from an elevator. An employee's finger was pinched between a component and the floor as he was lowering the component. The tip of his finger was amputated.,0
"An employee was inspecting a one-story residential roof. He fell down the roof slope and off the edge to the ground, suffering broken facial bones, lost teeth, a broken ankle, and brain bruising.",1
Employees were loading an air compressor onto a truck. The compressor rolled and trapped an employee's right hand against the truck. The employee suffered a crushing injury and an amputation to a finger.,1
"An employee was performing maintenance work on a hydrogen dryer. A hydrogen fire burned the employee's right arm, his right hand, and the right side of his face.",1
"An employee in the warehouse was operating a reach lift truck, picking orders for delivery. The lift truck pinned his left wrist against a material rack beam. The employee's wrist required surgery.",1
An employee had been placing labels on a pallet of doors. A pallet of doors fell off a forklift that was moving in reverse and hit the employee on the back causing contusions.,1
"On September 9, 2021, an employee was setting a manhole's cover back in place when the arm of a mini-excavator struck his hard hat, knocking him to the ground and causing a laceration to the back of his head. He was hospitalized.",1
"An employee fell from the top of a trailer, landing on the pavement and suffering fractures to the feet and a fibula.",1
"An employee was operating a rotary die cutter when it jammed due to scraps that built up. The employee manually turned the roller backward to remove the jam. His big toe was caught between the roller and the die board. The employee sustained a laceration, fracture, and amputation of the big toe.",0
"An employee was replacing a water-line. While unbolting a fitting on an unused PVC waterline, the PVC pipe blew apart and the employee was struck by pieces of the pipe and sustained a broken tibia and fibula.",1
An employee became ill and lost consciousness after an outdoor physical fitness test.,1
"An employee and a mechanic were tightening up the compression bolts on a faulty hydraulic line when the line ruptured and hot hydraulic fluid covered the employee's upper body, resulting in thermal burns to their upper body.",1
A lathe was being hoisted by hydraulics so it could be set down on cribbing. An employee was placing a 1-inch thick shim under the lathe when it came down on their thumb. The thumb tip was amputated.,1
A temporary employee was driving a post into the ground using a picket pounder. The post amputated the employee's left index fingertip.,0
An employee using twist pliers to install insulation panels was struck in the face by the pliers when a wire broke. The employee sustained a left eye orbital fracture and possibly a detached retina.,1
An employee was pushing a wheeled document bin when its weight caused her to lose balance and fall to the ground on her back. She suffered two broken vertebrae.,1
"An employee was unpacking a crate of glass panes. As the employee was holding them, the panes began to shift and fall. The employee attempted to move out of the way and fell onto her left side. The metal frame around the panes landed on the employee's lower right leg and broke it.",1
An employee was climbing down the ladder of a scaffold when his hand slipped and he fell approximately 3 to 4 feet to the ground. The employee landed on his feet and sustained a broken left tibia.,1
"An employee was pouring iron at a casting machine when a crane bumped the employee's ladle resulting in molten iron splashing onto the employee. The employee was hospitalized with burns to the right hip, ankle, and foot.",1
"An employee was laying plywood on a roof. After moving to pick up a bunk of plywood, he fell 12 feet from the roof to the ground, suffering a broken arm and a broken back. The employee was wearing fall protection but it was not connected to an anchoring point at the time of the fall.",1
An employee was pushing a cart that had gotten stuck when his right ring finger was pinched between the cart and racking. The fingertip was amputated without loss of bone or fingernail.,0
"An employee was on the top rack in a warehouse, pulling a box stove. A cardboard handle ripped and the employee fell about 35 feet, suffering a broken left femur.",1
"An employee was working on an electrical panel when it exploded. The resulting fire burned the employee's face, chest, and hands.",1
"An employee was connecting a pump hose to a milk truck. The valve at the pump closed and clipped his right index finger, lacerating it and causing a partial amputation to the fingertip.",0
"An employee was lifting a dump truck with a floor jack when the jack handle was hit causing the jack to drop and pin his foot against a wall. The employee's right tibia, fibula, and ankle were fractured.",1
"An employee stepped off a walkie/rider. It moved forward, and the employee was caught between it and a barrier. The employee suffered a broken lower right leg.",1
An employee was operating a stand-up forklift picking material for shipping. The employee lost balance and fell from the cab of the forklift. The forklift's rear tire rolled onto the employee's left foot and fractured it.,1
"An employee was testing electric circuit boards using a testing fixture machine and received an electric shock of up to 2000 volts when he contacted live, unguarded electrical parts on the test fixture machine. The employee was hospitalized for burns to both hands and injury to their shoulders and a finger.",1
An employee was cutting down a tree when a dead branch fell and dragged him approximately 12 feet to the ground. The employee sustained a broken femur and wrist.,1
"On September 10, 2021, at approximately 9:30 p.m., the injured employee was standing in between their powered industrial truck and a pallet of goods stacked approximately 7 feet high. A second employee was traveling through the aisle, pushing three pallets of goods stacked approximately 7 feet high and struck the injured employee's pallet. The pallet struck the injured employee and pinned their left foot between it and the PIV platform and their abdomen against the goods on the pallet and the PIV guardrail. The employee sustained trauma to the left foot and ankle and a fractured ribcage.",1
"An employee was performing inspection services on a pipe that had been placed on two stands. The pipe rolled off the stands and struck the employee's right ring finger, amputating the fingertip.",0
"An employee was replacing a tank pump. He was utilizing a pry bar to help manipulate two flanges to better position a new gasket between them. His left index finger was in the bottom bolt hole of the flange when the pry bar slipped, causing the flanges to come together and amputate the end of his left index finger above the first knuckle.",0
An employee was closing a railcar door when his right thumb was pinched between the door handle and the latch. He suffered an amputation to the thumb tip (with no bone loss).,1
The injured employee was waiting on stand-by while range operations were ongoing. The employee got out of a vehicle and walked over to an unexploded ordnance (UXO) and picked it up. The UXO exploded resulting in an amputation to the left hand and multiple amputations to fingers on the right hand.,1
"While parking a stand-up powered industrial truck (PIT) in a designated parking area, the employee's foot was pinched between the operator compartment and a guardrail. The employee's left foot was fractured.",1
An employee was driving a forklift when it went over a curb and flipped on its side. The employee suffered a broken ankle and was hospitalized.,1
An employee fell about 40 feet from a manlift while setting a steel beam and was hospitalized for multiple sprains.,1
An employee was operating a forklift when he lost balance and his right foot was caught between the forklift and a pole. The employee's foot was fractured.,1
An employee was on an extension ladder while tightening a sprinkler head. He fell about 6 to 10 feet from the ladder to the ground and both feet were broken.,1
"While on her lunch break, an employee was walking away from the deli. She tripped over a rug and fell to the floor sustaining a fracture to the right little finger.",1
An employee was struck by the bucket and boom of an excavator while it was piledriving poles into the ground. The employee sustained a crushing injury to the left leg and had also been struck in the head by the excavator's boom.,1
"An employee was installing an I-beam, lining up a pin to insert into a bolt hole. The I-Beam tipped, struck one of his fingers, and amputated the tip. The employee was hospitalized.",1
An employee was moving a shopping cart to the side of a fitting room. The employee fell backward and suffered a broken pelvis.,1
"While tarping a load of lumber on a semi-trailer, the truck operator fell from the top of the load. The operator sustained fractures to the lower legs and a vertebra.",1
"An employee was teaching an exercise class. As she moved to step up onto an exercise step, she fell, landing on the floor on her right side. She suffered a broken right femur.",1
"An employee was observing while glass was being put on a conveyor on the ingoing side of a washer. The employee's left hand was pulled into a conveyor roller. His index and middle fingers were severely broken, resulting in an amputation.",0
"While walking from the sales floor to the deli, an employee tripped on a rug and fell sustaining a broken hip.",1
"An employee was wire drawing when two wires overlapped. The employee was working to unwrap the wires when his fingers were pinched by the draw-line machine. The employee's right index, middle, and ring fingertips were amputated. The machine was running at the time of the incident.",0
An employee suffered a partial amputation to the left middle finger while operating a shear.,0
An employee was changing the tire of a semi-trailer for a customer. He replaced the tire on the rim and started putting air into it when the tire exploded and he fell down a ravine and hit his head. He was knocked unconscious and was hospitalized for head trauma and cerebral bleeding.,1
An employee was measuring a pipe for a job. The employee stood up after taking the measurement and hit his head on a support beam. The employee sustained a laceration to the scalp.,1
"An employee was changing a belt on a machine as part of preventive maintenance. He put the machine in ""Test"" mode to make an adjustment to one of the sprockets. A chain caught the employee's left thumb and pulled it into a sprocket, causing an amputation of 2 cm. of the thumb.",0
"During removal of a process strainer, the line became over pressurized and failed, spraying employees with extremely hot steam and condensate. An employee sustained third degree burns to the chest and legs.",1
An employee had been removing existing sod and installing new sod. He began feeling ill and suffered heat exhaustion.,1
An employee was cutting a piece of copper. The cutting shear caught the employee's left glove and amputated the tip of the employee's thumb.,0
An employee was standing in front of a machine when his hand got caught in the machine's rollers. The employee sustained broken bones and nerve damage.,1
"While an employee was waiting for a tool, a metal panel came off an adjacent building and stuck the employee causing a partial amputation to his right index finger.",0
An employee was cleaning a shower drain. The employee suffered a respiratory reaction to the drain cleaner that was being used.,1
"An employee was troubleshooting a paper feeding issue with a printing press. He lost his balance, and while trying to catch himself from falling, he grabbed the power transmission belt. The employee was hospitalized, and three of his fingertips were amputated.",1
An employee was cleaning the tip of a caulking sprayer. The sprayer discharged and injected caulking into her right hand. She was hospitalized.,1
"An employee was standing on a 2' x 6' platform that was on a forklift, lifted to approximately 10 to 12 feet above the ground. The employee took a step to his left and the platform tilted. The employee fell to the ground and sustained two broken wrists and a fractured pelvis.",1
An employee sustained a partial finger amputation.,1
"Two employees were installing a boom on a bucket truck. The boom was on a chain attached to a forklift; one employee was operating the forklift while the other moved the boom onto the truck. The chain released and the boom fell to the ground, smashing the employee's right hand under it. The employee suffered fractures to the middle and ring fingers and a partial amputation to the index finger.",1
An employee was hospitalized due to heat-related dehydration.,1
Employees were using an excavator to dig an excavation for a water line. The excavator bucket swung and struck an employee in the right side resulting in broken ribs and other injuries requiring hospitalization.,1
"An employee was driving an aerial lift from one part of a campus to another. Another vehicle rear-ended the lift, causing the employee to suffer a broken tibia and fibula. The employee was hospitalized.",1
"An employee was descending an extension ladder. The ladder fly section disengaged from the base section, causing the employee to lose his balance. He fell from the ladder, landed on the ground, and suffered a broken ankle and tibia.",1
Two employees were trying to right an overturned pallet of 10-foot angle iron using a forklift. One employee's left middle finger was caught between the pallet of angle iron and another pallet below. The employee suffered an amputation to the fingertip.,0
An employee's right middle fingertip was amputated by a track punch machine while the employee was being trained to operate the machine.,0
"An employee was changing the arm controller tensioner on a machine. As he pulled his right hand back, it struck a guard, which lacerated the back of the hand.",1
" An employee was walking on the job site when he stepped on a piece of plywood that was covering a hole. The plywood cover collapsed and the employee fell, hit his head, and fractured a wrist. The employee also sustained a head laceration.",1
"At about 7:45 a.m. on September 13, 2021, an employee was struck by a forklift as it backed up to pick up a stack of wooden pallets. The employee suffered an avulsion injury to the left leg and was hospitalized.",1
"On 9/13/2021, at 8:00 AM, an employee was doing surface preparation for painting, which included rigging the straps of steel joists to expose the unfinished side. The straps were attached to forks and rotated. The rigging came loose and hit the employee in both legs breaking both tibias. The employee was hospitalized and required surgery.",1
An employee was setting a concrete form when the form pinched and amputated their right index finger.,0
"An employee was testing a just-installed electrical switchgear. While the employee was testing a fuse, an electrical arc burned the employee's right arm and forearm.",1
"On September 13, 2021, an employee was using a rolling ladder to restock shelves. The ladder moved as the employee stepped back onto it, causing the employee to fall to the floor about 10 feet below and suffer a broken hip. The employee was hospitalized.",1
"On 9/13/2021, a temporary employee was placing finished goods on a conveyor belt. When the employee went to remove a jammed bag from the backend of the bag sealer machine, the tip of her left thumb was caught resulting in an amputation.",0
An employee was operating a forklift. The employee's leg was pinned and broken between the forklift and a guardrail.,1
"An employee was re-roofing a commercial building when it started raining. He turned around, slipped, and fell 15 to 20 feet to the ground, striking his arm on an HVAC condenser during the fall. The employee's arm was broken.",1
An employee was struck by a car in the parking lot and sustained a right ankle injury.,1
An employee was stepping from a ladder to the roof of a residence. The employee fell to the concrete driveway below and suffered a fracture in the eye socket area.,1
"On September 13, 2021, an employee was underneath a rough-terrain forklift removing a steering rod column. The jack stands used to support the forklift collapsed, causing the forklift to fall onto the employee. The employee sustained injuries to the shoulders, collarbone, and ribs.",1
An employee was using a de-tensioner to loosen a bolt that was installed in a locomotive engine casing. The reaction arm slipped off the main bolt and caught the employee's hand against the engine block. The employee sustained fractured bones in the hand that required hospitalization and surgery.,1
"On September 13, 2021, an employee was being lifted up on the forks of a forklift. His index finger was caught between the forks' backrest and a rack, resulting in a partial amputation to the finger.",0
An employee was replacing the valve on a frac pump. Fingers on his left hand were caught in the pump's moving pistons and injured; the middle finger required surgery.,1
An employee was struck by a skid of freight that he was unloading. He suffered fractures to the collarbone.,1
"An employee was working with a 12-foot coater machine. While changing a roll, the employee was caught in the material on the roll and pulled into the coater. The employee suffered a laceration to the head/face and was hospitalized.",1
"On September 13, 2021, an employee was closing a small gate on a package chute when it caught his left index fingertip. The fingertip was amputated.",0
"An employee was exiting out the back of a truck. He stepped on a cart, slipped, and fell out of the truck, suffering five broken ribs and a scraped chin. He was hospitalized.",1
"On September 13, 2021, an employee was checking the depth of a plug-in electric router when their left hand contacted a bit on the router, resulting in a partial amputation of the middle finger.",0
"An employee was lowering a hopper into an extruder using an electric hoist. His left middle and index fingers were caught between the hopper and the extruder, resulting in amputations to the fingertips.",0
"An employee was riding in a telehandler's basket, preparing to clean a duct. The forks of the telehandler caught on a beam. The telehandler then backed up. This caused the force on the forks to be released, which jostled the employee. The side of his body bumped into the basket railing and he suffered three broken ribs and a punctured lung. He was hospitalized.",1
"As an employee was removing an engine from a truck, the engine fell on the employee's left middle finger. The employee's finger was partially amputated.",1
"An employee was removing insulation from the dust filters on the second floor of the warehouse. The employee was climbing an 8-foot step ladder to access the work area when his right foot slipped on a rung, causing him to fall about 5 feet to the ground below. He landed on both knees and sustained fractures to his pelvis and knee.",1
"An employee fell down stairs while carrying a large package, suffering a broken elbow.",1
"On September 14, 2021, an employee was operating a pallet jack. As he turned into another aisle, his right ankle and calf were caught between the platform of the pallet jack and the empty wooden pallet that was in the slot location. The employee suffered a broken bone in the lower right leg and was hospitalized.",1
"An employee was standing on a 8-foot folding ladder, installing bolts on a pavilion. He fell 5 feet to the ground and suffered a fractured skull. He was hospitalized.",1
"At about 3:30 p.m. on September 14, 2021, an employee was riding on the step used to access the cab of a powered industrial vehicle, observing the vehicle's operator for training purposes. The vehicle was traveling through an aisleway of a racking system used to store lengths of steel beams/poles. The employee's right arm struck the steel shelf arms of the racking system resulting in a fractured radius and ulna. The employee was hospitalized.",1
An employee was trying to remove a tool from a machine when his right thumb was caught in the sprocket of the shaft of the machine resulting in an amputation. The machine was not locked out at the time.,0
"An employee was cleaning between two pieces of equipment. One piece moved and pinned the employee against the other, breaking the employee's fibula. The employee was hospitalized.",1
"An employee was removing chains from plywood formwork. The formwork was hit by another piece of wood, and the wooden formwork struck the employee on their lower back, resulting in a back contusion.",1
"An employee was moving a garbage cart from a compactor. He fell and hit his head on a pipe, suffering internal bleeding in the cranium.",1
An employee was reaching under a concrete chute when it closed on his right middle finger. He suffered an amputation to the fingertip.,0
An employee was troubleshooting a check weigher. The machine was turned off and the employee replaced the drive belt. When the machine started back up the employee's right index finger was caught on the moving belt and partially amputated. The employee was hospitalized and required surgery. The machine was not guarded at the time.,0
"An employee was replacing an air bag on a dump truck when another air bag exploded, causing the tractor trailer to drop onto his hands. He suffered a partial amputation to the right index fingertip.",0
"Employees were at the facility to perform hurricane cleanup and repair. The frame of a pull-down overhead door had been blown out during the hurricane. An employee was mounting a board to a bracket of the frame to then install a temporary vinyl curtain. The employee was standing on a pallet that was attached to a forklift and was approximately 8-10 feet above the gravel ground. When the employee struck the overhead door, it came loose and struck him, causing him to fall from the pallet to the ground. The employee sustained a fracture to the upper area of the right leg.",1
"On September 14, 2021, an employee was at the ground level of a tank performing ""ground watch"" for an articulating lift. Two employees were on the dome of a tank sandblasting. A sandblasting hose fell off the edge of the tank 100 feet above and struck the employee, who suffered a back laceration, a broken collarbone, and broken ribs. The employee was hospitalized.",1
"An employee was driving a stand-up forklift when items on a nearby elevated slot were displaced and started falling. The employee reached out to stop the items from falling and his left middle finger was caught between a pallet, the elevated slot, and the forklift, resulting in an amputation.",0
"An employee was repairing the lift assist on a dock lock system. The block used to support the frame came loose and caused the frame to fall, hitting the employee's left bicep and causing a partial amputation to a finger on the employee's left hand.",1
And employee was removing a corrugated metal roof panel with a claw hammer and chisel. A metal shard shot from the hammer and punctured the employee's upper arm.,1
"An employee was climbing down a ladder. The employee fell at the third step, landing on the ground and suffering a broken left hip.",1
"On September 14, 2021, an employee tripped over a metal frame on the ground that was supporting a jib crane. The employee fell to the concrete floor and sustained five rib fractures. The employee was hospitalized.",1
"An employee was walking over to an oil spill near the pumps of a gas station when they slipped and fell to the concrete ground, resulting in a broken ankle.",1
"An air hose had come disconnected from a tire that had just been installed on a truck. An employee put the hose back on the tire, which exploded and injured the employee.",1
"An employee was climbing a ladder when he lost his balance and fell 7 feet to the ground. He sustained two fractures in his left arm, three fractured ribs, and a punctured spleen.",1
"An employee was removing a conveyor system for disposal. Two of the conveyor legs were on skates while the other two were being jacked up. Two of the conveyor's legs buckled and fell, causing the employee's right hand to become caught between the jack handles and the bottom of the conveyor panel. The tip of the employee's right ring finger was amputated.",0
An employee was opening a sliding gate when it amputated the employee's left little fingertip.,0
"An employee was hooking air lines to an empty trailer to return to the plant, and he used the steps on the fuel tank to exit the truck. The employee missed the bottom rung of the step, causing him to fall approximately 2 to 3 feet to the ground. The employee sustained broken ribs and a punctured lung.",1
"An employee was trying to unlock a brake underneath a garbage truck. After the brake was released, the truck rolled over the employee injuring his back, ribs, and lungs. The employee was hospitalized.",1
"An employee was working on a skid-steer loader repairing the AC when the door closed on his finger, amputating the fingertip.",0
"On September 15, 2021, an employee was trying to collect machined dust from the auger area of a machine. While in the small trench containing the auger, the employee slipped. His right hand was caught in the auger and severely injured. All five fingers were medically amputated. The machine was not locked out/tagged out at the time.",1
"On September 15, 2021, an employee was repairing a jackhammer while standing near the front of a furnace platform used to set ladles. The employee was pinched between the ladle transfer carrier and the platform, suffering cracked vertebrae and cracked ribs. The employee was hospitalized.",1
"On September 15, 2021, an employee was removing the through-spindle coolant tube on a gantry mill. The employee lowered the coolant tube and another component shifted, causing his left index and middle fingers to become pinched. The employee's index finger was lacerated at the point of impact and required surgery.",1
"An employee was attempting to rotate a wooden pallet, which contained three aluminum coils weighing about 1,200 pounds. While trying to reposition the pallet, the employee fell backward onto the concrete floor. The employee sustained a vertebra fracture.",1
An employee fell while pushing a custodial cart and suffered fractured vertebrae.,1
"An employee was standing on a mezzanine waiting for a 2,000-pound machine to be placed. The machine was put on top of his hand, crushing his thumb and causing an amputation.",0
"On September 15, 2021, at approximately 8:15 a.m. an employee was driving an aerial lift when the bottom of the front basket caught the edge of a B-Box water flow control valve. The employee continued to raise the aerial lift until the B-Box valve broke and the employee was ejected out of the aerial lift basket onto the front edge of the home's concrete slab. The employee fell 6 feet and was hospitalized for a severe neck injury.",1
An employee was hospitalized after an amputation incident.,1
"An employee was operating a spreader machine when a chain caught his right hand and pulled it into the machine, resulting in amputations to his index, middle, and ring fingers.",0
"An employee was moving a hydraulic clamp. His right hand was caught in a pinch point created by the piston, and the ring fingertip was amputated.",0
An employee had been cleaning a fryer. Hot oil from the fryer burned the employee's right forearm and hand.,1
"An employee was working on a forklift when another forklift ran over their right foot, crushing it.",1
"An employee was waiting for material to be loaded onto a processing table. After the light gauge material was loaded, the material expanded and struck the employee on their lower right leg. The employee's lower right leg was broken.",1
An employee's right thumb got caught in the moving chain and sprocket of a lathe resulting in amputation of the thumb tip. The drive chain assembly was not locked out at the time.,1
"An employee was trying to remove excess glue from a roller on the top of a compression belt on a panel line. Her left hand was pulled into the machine, which pulled back the skin on the back of her hand.",1
"As an employee was stepping down from a step ladder, their right middle finger got caught between the employee's tool holder and the ladder. The employee's fingernail was removed and the finger was fractured. The employee was hospitalized.",1
An employee set up a ladder on a roof against a 12-foot parapet wall to pull up ropes. The ladder slipped on the wet roofing surface and the employee fell from the ladder. The employee sustained six rib fractures and a punctured right lung.,1
An employee was performing a drilling operation when their thumb was caught in the drill and fractured.,1
"On September 15, 2021, at 9:50 PM, an employee was operating a ride-on pallet jack and fell off while navigating a turn. The pallet jack then struck the employee and pinned his ankles against a pallet. The employee was hospitalized for bilateral ankle fractures.",1
An employee was folding up a lift gate after making a delivery. His thumb was injured between the truck bed and the lift bed. The thumb was partially amputated.,1
"An employee was on a workroom floor during a power outage, locking up a reasonable accommodation chair. The employee tripped on a guardrail that was lying on the floor, fell into another guardrail, and suffered a broken left shoulder and broken left-side ribs.",1
"On  September 15, 2021, an employee was pulling wire out from under some bushes when he tripped and fell, resulting in a rib fracture and a punctured lung. He was hospitalized.",1
"Two employees were in the basket of an aerial lift. When attempting to bring the basket down, the basket got hung up on a perimeter guardrail post. The basket moved, causing one employee to strike their chest against the lift's guardrail. The employee sustained a fractured rib and was hospitalized.",1
An employee was marking up an area for digging on a residential property. The employee fell over a two-foot wall and fell to the ground. The employee sustained a broken leg.,1
"An employee was guiding a powered industrial vehicle into position to lower an elevator machine onto a pedestal for installation. The elevator machine shifted and pinched the employee's fingertip. The fingertip was amputated above the nailbed, without bone loss.",0
An employee slipped and fell on a wet spot of the floor created by condensation on overhead ductwork. The employee suffered a broken right patella and was admitted into the hospital.,1
"An employee stepped on a steel beam and it rolled onto his leg. He was taken to the hospital, where he had surgery for a compound leg fracture.",1
"An employee was selecting product out of a racking system and placing it on a powered pallet jack. When the employee attempted to move the jack forward, the jack struck his left leg, pinning it between the jack and a rack. The employee sustained a broken leg.",1
An employee went to get merchandise out of a unit when her foot was caught in a door rope and she tripped and fell hitting her right knee and left shoulder. The employee sustained a broken kneecap and a dislocated shoulder.,1
"An employee was using a ladder. The employee stepped on a file cabinet, fell, and suffered a broken leg. She was hospitalized.",1
"On September 16, 2021, a standup forklift operator was picking orders from racking systems inside a warehouse and became pinned between the forklift truck and the rack, resulting in a fractured pelvis.",1
"At 5:30 a.m. on September 16, 2021, an employee was operating a gang saw when a metal part became caught in the saw at an uneven angle. The employee went to the back of the saw and pulled the metal out. The gauge then cycled and caught the employee's right forearm against the advancing part to be cut. The employee's right forearm was broken and she was hospitalized, requiring surgery.",1
"An employee was sorting mail. The employee tripped over a mail tote and fell, suffering a broken left knee.",1
"An employee was putting cardboard into a dumpster. When he tried to push the cardboard down, the employee fell into the dumpster. The employee broke his left leg.",1
"On September 16, 2021, an employee was cutting compressed foam with a table saw when the sawblade amputated the tip of his right thumb (without bone loss).",0
An employee was operating a fryer. Hot oil from the fryer entered her glove and burned her left hand.,1
"On September 16, 2021, an employee was operating a plastic trimmer when it lacerated his right hand. He was hospitalized, requiring surgery for tendon repair.",1
"An employee was moving a 40-pound concrete pipe. The employee's right index finger was pinched between the pipe and another concrete piece, resulting in amputation of the fingertip.",0
"A temporary employee was helping another employee with stacked product. The product fell, and the temporary employee suffered an arm laceration involving a major vein/artery. The employee was hospitalized, requiring surgery.",1
An temporary employee tripped and fell to the ground. She sustained fractures to her femur and knee.,1
"An employee was removing a guard. As he stepped back to reposition himself, he twisted, fell, and suffered a leg injury.",1
"A crane operator hoisted a load, placed it, and lowered it. Two riggers unhooked the rigging, put the empty hooks beside the load, and signaled the operator to hoist the empty hooks. When the operator hoisted the hooks, one hook got hooked onto the load, shifting it and creating a pinch point where the injured employee's leg was positioned. The employee sustained a scrape to the backside of the right calf and a cut on the lower left leg.",1
An employee was using a bead roller machine to make a bead in a round piece of metal duct when their left middle and ring fingers got caught in a pinch point on the rollers resulting in the loss of soft tissue and a fragment of bone.,0
An employee was using a creeper to clean under packers. As he slid under the adjacent packer he reached up and a running chain caught the employee's left hand pulling it into the sprocket. The employee's left ring finger was amputated at the first knuckle.,1
An employee was washing out the hopper of a concrete trailer pump. Components of the hopper lacerated and broke the employee's right arm.,1
"An employee was cutting a piece of steel with a saw. As the employee was trying to remove a piece of scrap steel, the sawblade amputated the tip of their right index finger.",0
"An employee was operating a rebar bending machine. The rebar swung back on its long end and hit the employee's left leg, breaking the femur.",1
A mechanic was assisting another employee to tow a forklift that needed repair. He grabbed a chain and was about to insert it on the forks when his left middle finger got caught between the chain and a fork. The finger was medically amputated at the first bone.,1
An employee was installing a radiator on a generator. A part fell and struck the employee on the head and left shoulder. The employee suffered head trauma.,1
"An employee was sorting large parcels in the large parcel sorting area. The employee moved a gaylord box filled with parcels with a manual pallet jack. The employee was on the front side of the box, pulling down on the upper edge of the cardboard and tipping it over. As she stepped back and was pulling down, her feet slipped out from under her and she fell backward. As she fell, she placed both hands back to catch herself and fractured both wrists.",1
An employee was removing a connector hose to a transfer pump. The employee's right middle finger was caught in the feed opening of the pump by the lobe transfer pump shaft. The employee suffered a fingertip amputation.,0
"A temporary employee was adjusting film on a bagger machine. As he pulled his hand out from the longitudinal bag sealer bar, the bar came down and amputated the tips of two fingers on his left hand.",0
"An employee was scrubbing a plastic tub when his left middle finger was pinched between the plastic tub and the floor, resulting in a blood blister. The injury became infected.",1
"On September 16, 2021, an employee was stung by a bee while moving linen carts on a loading dock. The employee had an allergic reaction to the bee sting and was hospitalized.",1
"An employee was using a trim sealer to seal a bag of trim cheese. The seal bar caught the employee's finger, causing a partial amputation to the fingertip.",1
"While operating a drill press, an employee's gloved left hand was pulled into the drill bit. The employee's index, middle, and ring fingers were partially amputated.",1
"An employee slipped and fell on a wet floor, suffering a broken left ankle.",1
"Two employees were backing out a pair of forklifts. The forklift in the rear stopped, with its forks still raised, and began to advance. A pallet on the forks struck the right hand of the employee who was operating the forklift in front. His middle fingertip was amputated.",1
"After a chemical leak at the plant, an employee reported heavy breathing and eye pain. The employee was hospitalized.",1
An employee suffered a partial amputation.,1
An employee was assisting a patient get up from the CT table and move across the room. The employee's right foot got caught in the CT table straps; the employee fell forward into the wall and then down to the floor. The employee was hospitalized with a right patellar fracture and a fractured left radius.,1
"An employee was helping a customer in a store's front register area. A car struck the storefront, detaching a shelving unit and a counter. The employee suffered a foot injury and was hospitalized, requiring surgery.",1
"An employee was clearing a jam on an onion line when a screw driver they were holding got caught in the diverter, resulting in an injury and subsequent amputation.",0
"An employee was clearing a jam in a piece of equipment used to process paperboard scraps when their right hand contacted blades in the equipment, resulting in the amputation of two fingers.",1
An employee climbed inside a mulch blower to kick the mulch into a mower. He slipped and his boot became stuck. The motor fractured his foot.,1
"An employee was standing on the back of a bucket truck trying to lift and load a coil of cables into the truck. The employee's right arm got caught between the boom and bucket, pinching his arm and creating an open wound on his upper arm. Surgery was required to repair the injury.",1
A bakery associate was using a step ladder to pull items from the freezer when she fell and fractured her knee and/or leg. The employee was hospitalized.,1
An employee was investigating a noise from the belt area of a mill. The employee's finger touched the top of the drive belt and his right hand was pulled into the pulley. His middle finger was caught in the drive mill assembly and partially amputated.,0
"An employee was leaving the facility for lunch. While walking down the stairs, the employee's knee gave out and the employee fell. The employee sustained a fractured leg and was hospitalized.",1
"An employee slipped and fell while walking into a pastry shop, suffering a broken femur.",1
"An employee was helping to move a concrete form. The employee climbed on top of the 7-to 8-foot tall form to readjust the lifting device. The employee connected a positioning hook onto the form. The form tipped over and the employee jumped off, but they were still connected to the form. The form struck and broke the employee's lower right leg.",1
An employee was assisting in unjamming the forks on the forklift when their hand was caught between a pallet and the forks resulting in a middle finger amputation.,0
An employee was working on a thermo-former machine when one of the clamps crushed her left thumb in the frame.,1
An employee was pushing a limit switch on a bailer. The bailer cycled and amputated the employee's thumb.,0
"An employee was troubleshooting equipment. The employee's left hand contacted a pinch point of the machine, causing a laceration and fracture to the middle finger.",1
"An employee was shoveling hot asphalt while standing behind a paver. He collapsed and fell face down into the asphalt sustaining burns to the face, ears, and both hands.",1
"An employee was removing boxes from a trailer. As the employee was leaving the trailer, boxes fell onto the employee's leg and broke it.",1
"An employee was trying to remove a 1,000-pound roll of paper from a pallet. The pallet broke and the roll turned sideways, fell on her right leg, and broke it. The employee was hospitalized.",1
"An employee was working on an overhead screen guard and leaning over to check jig alignment on the line. The employee had cut the welds loose on a check gig and held it up with a come-along to relocate it. The remaining single bead broke loose, causing the check gig to catch the employee's left-hand fingers against the column for the top of the check gig. The little finger was crushed and lacerated and the ring finger was partially amputated at the nailbed.",0
"An employee was repairing building lights from a 10-foot ladder when he fell from the ladder to the ground, resulting in an injured left leg.",1
"An employee was slicing pepperoni on a deli slicer and lacerated his thumb, resulting in a partial amputation.",1
An employee was mounting a tire on a tire machine when his left hand was crushed by a mechanism on the tire machine.,1
"An employee stepped off a parking lot sidewalk curb and twisted her ankle, breaking it.",1
"An employee's finger was caught between the crimping rollers on the extrusion line while removing a jam, resulting in an amputation and hospitalization.",1
"An employee was responding to a seal leak on a crude pump when a nearby switchgear arced, causing a pressure wave to knock him to the ground. The employee sustained multiple lacerations to his face and hands.",1
"An employee was crossing the road in front of a store, on the way to retrieve shopping carts from the parking lot. A motor vehicle ran her over. She suffered injuries to multiple body parts, including the back, pelvis, ribs, and a femur.",1
A heat exchanger fell on top of an employee's legs resulting in a crushing injury.,1
"An employee slipped while coming down a ladder and fell to the ground, suffering a broken right elbow.",1
"An employee was saddled in their horse monitoring other horses on a walking trail when a guest dropped their reins. The employee leaned forward to grab the guest's reins. The employee's horse then backed up about 10 steps, reared up, and fell over, causing the employee to fall off and the horse then landed on the employee's left leg. The employee was hospitalized with a broken tibia.",1
After lifting a tire onto a conveyor belt an employee experienced abdominal pain. The employee was hospitalized for a hernia.,1
"On September 18, 2021, at approximately 11:08 PM, a maintenance employee was repairing a heatset tunnel exit roller. The rubberized coating on the exit roller ruptured, blowing pressurized steam and hot water onto the employee. The employee was hospitalized with second and third degree burns to the left arm, abdomen, and back.",1
An employee was replacing a guard on a conveyor drive. The employee suffered a crush/cut to the right thumb.,1
An employee who was caring for patients received a bacterial infection.,1
"An employee was raising a light pole using a digger when the digger made a jerking motion that caused the pole to swing once it was off the ground. The pole made contact with one of the phases, which energized the pole as it swung back and made contact with the employee's chest, resulting in an electrical shock to the chest and a contusion.",1
"An employee was making a grocery delivery using a scooter. While attempting to get onto the sidewalk, the employee hit a bump and fell off the scooter. The employee sustained lacerations to his forehead, road rash to his knees, a swollen lip, and a cut under his left eye.",1
"An employee was using a bandsaw to cut bone-in pork loin. The sawblade cut the employee's right thumb, amputating about 1/4 inch from the tip.",0
"An employee was using a 3 1/2-pound dead blow hammer to re-crimp the swage of a cable for a metal identification tag. The hammer struck the employee's left index fingertip, causing a crush injury. The employee underwent a partial medical amputation.",0
"An employee was grinding a large metal casting on a 30-inch stationary grinder when the casting slipped and the employee's hand struck the rotating grindstone, resulting in amputation of the left little finger.",0
"An employee was using a 15-foot ladder to access a chill water line on a ceiling. The employee fell from the ladder to the concrete floor, suffering a broken left arm, left leg, and hip.",1
"An employee was driving a car out of a car wash tunnel. The car went out of control and hit a tree. The employee's head struck the windshield, causing a laceration that required sutures and stitches.",1
"While working in a client's home, an employee reached to turn on a light switch and fell down the basement stairs approximately 4 steps to the concrete floor. The employee sustained fractures to the right wrist, elbow, and knee, and a laceration to the face.",1
"An employee was hooking up a metal buggy to an overhead crane. The metal buggy fell and crushed the employee's foot. The employee's was hospitalized, undergoing surgery.",1
"An employee was prepping a piece of drill steel for a hole being drilled. The last piece of drill steel in the carousel had a tricone bit attached to the bottom. The employee tightened the jaws on the drill rig to loosen the tricone. When the employee opened the jaws to remove the tricone, his left thumb was caught between the backside of the jaws and the receiver. The tip of the thumb was amputated just above the nailbed.",0
A nurse was visiting a patient's home to change out the regulator on the patient's oxygen tank. Oxygen from the tank ignited causing third degree burns to the employee's hands.,1
An employee was about to change a saw blade when the saw amputated two of the employee's fingers.,0
"An employee was swiping her building access badge when she stepped into a rut/hole in the concrete beneath the badge swipe station, lost her balance, and fell. She suffered a broken hip.",1
An employee was walking on a walkway over a conveyor system. He fell from the platform onto the conveyor and suffered a broken fibula.,1
An employee was operating a stand-up forklift. The employee's left foot was caught between the lift and a piece of angle iron on the floor. The little toe was amputated.,1
"An employee was climbing off a saw from a height of 3 feet. He slipped on a cross-member and his hand contacted the belt that had just been installed on the saw. The weight forced the belt to move through the pulley, bringing his right hand with it. He suffered lacerations to the right index, middle, and ring fingers and an amputation to the index finger at the second knuckle.",0
"On 9/20/2021, around 6:50 a.m., an employee was taking grain samples when a splice on the conveyor belt pulled the sampling device out of the employee's hand. The employee's hand made contact with the sampling device and the conveyor cover. The employee sustained amputations to two fingertips on their right hand and was hospitalized.",1
An employee was using a power jack to move pallets when she fell backward to the floor. She suffered a skull fracture.,1
The injured employee had been placing pallet stringers (rough cut wood) into the hoppers for a nailing machine. The injured employee was removing a jammed piece of wood from a hopper while the operator of the nailing machine was also trying to unjam the wood. A metal bar moved and pinched the injured employee's finger against the jammed wood causing an avulsion injury to the fingernail and skin of the fingertip. The employee's finger required surgery that involved trimming the bone of the fingertip.,0
An employee had been installing a new roll of foil on a cookie wrapping machine. The employee was pulling the foil towards herself when the foil cutting blades caught her right middle finger resulting in amputation up to the nailbed.,0
A blade change was underway on a table saw. An employee plugged the saw back in to complete a test cut; the wood caught and the employee's thumb was pulled into the blade and lacerated. The employee was hospitalized.,1
"Two employees were looking at a piece of granite stored on a wooden A-frame. The piece of granite slipped off the A-frame and landed on one employee's foot, causing a partial amputation to a toe.",0
"An employee was filling up the air reservoir tank on a brake bleeder kit. The tank ruptured and separated at the seam, and the employee suffered severe lacerations and fractures to the right hand.",1
An employee fell and strained a knee.,1
"While directing landfill traffic, an employee's feet were run over by a semi trailer. The employee's left ankle was fractured.",1
An employee was installing a safety emergency horn when he was shocked and fell from the second rung of a 4-foot fiberglass ladder. The employee sustained a fractured left arm.,1
An employee was cleaning a glass door. The employee fell to the floor and suffered a broken leg/hip.,1
"An employee was fixing the angle of speed limit signs. The signs (weighing 1,000 pounds) slipped and crushed the employee's leg.",1
"An employee was pulling cartons of paper product from a skid located on the ground when a second skid of cartons fell and struck the employee on the right side of his chest, knocking him to the floor and resulting in a chest injury.",1
"An employee was using a pry bar to guide two concrete forms a few centimeters into place when their right middle finger was pinched between the two forms, resulting in a fingertip amputation.",0
"An employee was cleaning the production area floor when she slipped on soap and fell, hitting the floor on her right side. The employee's right hip was broken.",1
"While walking, an employee was struck by a forklift in the production area of a warehouse. Four toes on the employee's right foot were amputated.",0
"An employee working for Ramos Drywall Specialist LLC stepped into a wooden box that was being lifted by a telehandler. The box shifted on the telehandler's forks and it fell along with the employee, landing on a scaffold system below. The employee suffered a broken jaw and a facial laceration.",1
An employee had been working on the pulley board. The employee fell 5 or more feet into the well cellar and hit his head on a 4-inch pipe sustaining a laceration on the back of his head.,1
"An employee was investigating the accumulation of condensation at a pipe connection and was inspecting the flange at the connection. The residual pressure in the system caused the pipe to release from the connection and strike the employee, fracturing his neck, back, collarbone, and multiple ribs and lacerating the back of his head.",1
"An employee was getting moving blankets out of a box truck. As the employee exited the truck, she fell and landed on her leg. The leg was broken.",1
"An employee installed a liquid asphalt hose and was filling a truck at the terminal plant. The hose detached, resulting in hot liquid asphalt spraying onto the employee. The employee was hospitalized with burns to the face, neck, and hands.",1
"An employee slipped on spilled milk while walking between tables. The employee fell to the floor, suffering a broken femur.",1
An employee was exposed to glue containing isocyanate while doing maintenance work on a glue machine. The employee developed respiratory problems and was hospitalized.,1
An employee was operating a paint extruder machine when It began to gum up. Half an inch of his left thumb was amputated in an opening on the machine.,1
"An employee was using a construction vehicle to push a scraper in front of him to align it. He engaged his push block, and it went over the push bumper. When the scraper came off, the force thrashed him around inside his cab. The control arm/joystick punctured his abdomen.",1
"On September 21, 2021, an employee was unloading a truck using a forklift when the dock plate popped up. The employee's foot was caught between the dock plate and the forklift, and the big toe was amputated.",0
"A rented bulldozer was being returned to a facility. It developed issues going in reverse while being backed off a trailer. While its operator was investigating the problem, an employee of Condrey Farms moved to pick up the last chain used to bind the dozer to the trailer during transport. One of the dozer tracks engaged, making the dozer spin on the trailer, and the front blade of the dozer pinned the employee against the front blade of a parked dozer next to the trailer. The employee suffered a hematoma on the left side of the stomach and was hospitalized.",1
An employee was working on a frac valve when a pressure fitting released and struck the employee's upper left thigh. The employee sustained a laceration and was hospitalized.,1
"On September 21, 2021, an employee had finished cleaning the floor and cabinets inside a newly manufactured home. She then started descending a distance of 4 feet from the manufactured home floor to the production floor using a 6-foot A-frame ladder. She fell and hit her head on the production floor. She was found unconscious with bleeding from the head. She was hospitalized with a head injury.",1
An employee's finger was lacerated while they were cutting metal roofing with a saw.,1
An employee was walking down steps carrying a ladder and a tool bag. The employee fell and suffered a broken right ankle that required surgery.,1
"On 9/21/2021, at 2:15 PM, an employee in a boom lift was setting a bar joist that was being swung in by a crane. While moving the bar joist across a girder, the joist rolled off the girder and struck the employee’s right arm. The employee sustained a fracture to the upper right arm requiring hospitalization and surgery.",1
"On 9/21/2021, at 2:15 PM, an employee was using a cutting torch to remove the top of an empty drum that contained hydraulic fluid. Vapors in the drum expanded causing the top of the drum to blow off and strike the employee's left arm and right hand. The employee sustained a fracture to the left arm and required stitches on the right hand.",1
"On September 21, 2021, at approximately 2:30 a.m. an employee was cleaning a pastillator machine, a rotoform granulation system, when her right hand was caught and crushed in a running nip point. The employee sustained fractures and second and third degree burns to the right hand. The machine was not locked out or guarded at the time.",1
An employee was trying to clear a jam on a scrap conveyor line. The employee's left middle finger was caught in the chain and sprocket and partially amputated.,0
"An employee was adjusting paper on a door. Her finger was caught in the door's hydraulic closer, which amputated the fingertip.",0
An employee was checking to see what was causing a mixer chute to jam when the valve engaged and caught the employee's fingers. Two fingertips on their left hand were amputated.,0
"As an employee was removing a wheel of cheese from a hydraulic wheel cutter, her right little fingertip was pinched underneath a cutting wire, resulting in an amputation.",0
"An employee was loading a stake body trailer (about 3 feet high) with HVAC components. The employee climbed onto the trailer to secure the load, then slipped off the open side of it and fell to the asphalt parking lot pavement. The employee suffered an injury to the left hip.",1
The injured employee was working to lift a 55-gallon chemical drum off a pallet jack. Two other employees came to help with the lift. The drum fell on the injured employee's left ring finger and amputated the fingertip.,0
"While assisting hospital staff with a combative patient, an employee was struck in the eye by the patient's hand/fist. The employee sustained a contusion to the face and injury to the eye.",1
An employee was folding soil matting in preparation for excavation and land reclamation when he was struck by a rubber-tracked skid steer. The employee was hospitalized with two fractures to the right leg.,1
"An employee was performing preventive maintenance on a forklift and opened the door to access the battery bank. As the employee started sliding the battery bank out, his right ring finger was caught between the forklift and a structural beam resulting in a fracture and a fingertip amputation.",1
"An employee was using a bandsaw to cut packaging cores. As he was cutting the last packaging core, the sawblade cut his right middle and ring fingers, causing partial amputations to the fingertips.",1
"An employee was using a portable ladder to descend into a shaft. Both side rails of the portable ladder snapped, causing the employee to fall approximately 22 feet to the concrete level below. The employee sustained lacerations on their head and multiple fractures to their hip and pelvis.",1
An employee was operating a trim machine. The roller pulled in the employee's right hand and amputated the index finger.,1
An employee was walking to a trash can when they were struck by a forklift. The employee sustained a fracture to the leg/ankle.,1
"An employee lost balance when removing a lid from a metal bin and she fell, breaking her right femur.",1
An employee was operating a table saw when the saw amputated their right index finger.,0
"While working on an offshore vessel, an employee's hand was caught between a tension tagline and a cleat. The employee sustained an amputation to his left ring fingertip.",1
"An employee was working at a filling line, filling a can with potatoes. A piece of equipment caught the employee's shirt and pulled the employee's right arm into the machine. The arm was broken.",1
An employee had been operating a palm station on a press. He was placing parts on a table when another part fell from the table to the floor. The employee then went around to pick up the part. His hand was positioned in the die space of another press when that press cycled. The employee sustained partial amputations to the ring and little fingers on his left hand.,1
"An employee slipped and fell from a fixed ladder, struck another employee, and suffered a broken leg.",1
"While performing a delivery, an employee was at the rear of a trailer, strapping a crate. A backhoe's bucket dropped on the employee's head and shoulder area.",1
An employee was helping to drive pilings when their finger became pinched between a pile and the pile lead resulting in a partial amputation.,0
An employee was placing a crane cable into a crane block. The employee's left glove was caught and the employee's middle finger was caught under the cable resulting in a fingertip amputation.,1
"An employee was using a step ladder to access a conveyor belt 10 feet above the floor. He lost his footing on the ladder, reached out to grab something stable, and grabbed the tension roller. The running belt pulled his right hand and forearm in between the tensioner and the belt, causing a compound fracture to the humerus and radius.",1
"An employee was using C- and L-clamps to secure two half-inch steel plates, measuring 12 feet by 12 feet and weighing 400 pounds each. The steel plates were on a beam frame table. A plate moved, resulting in the amputation of the employee's left index finger between the first and second knuckles.",0
An employee was descending a 4-step platform after exiting a wing box. His shoe got caught on a step and he fell backward. His left wrist struck a structural anchor plate and was broken.,1
"At 11:20 p.m. on September 21, 2021, an employee was shutting down a fryer. She noticed heated oil leaking from an open valve that was not supposed to have fluid in it. While trying to close the valve, she slipped on and landed in the hot oil. She suffered burns to her right hand, forearm, and hip and her left lower leg. She was hospitalized.",1
"An employee was opening a railcar door when the door fell from its hinges and struck him. The employee sustained fractures to the T5 and C5 vertebrae, and a laceration to the face.",1
"An employee was moving a heavy-duty flange with a hoist and crane. The hooks/chains slipped, causing the load to come down on the employee's hand. The employee suffered a finger amputation.",0
"An employee was trimming a tree. When a tree branch was removed, the employee's left index finger was caught under a rope and amputated.",0
"On September 22, 2021, an employee was operating a forklift inside a truck when the truck pulled away, causing the forklift to fall to the ground. The employee was hospitalized for a back injury.",1
"An employee was lifting a large piece of metal. The metal slipped and caught the employee's finger, causing a degloving injury. The employee underwent a surgical amputation to the finger.",0
"On September 22, 2021, the injured employee was guiding a trainee at the bin house to make sure there was no feed in the bin.  They both walked on a catwalk towards a fixed ladder to access the head house. While transitioning onto the ladder, the injured employee lost balance and fell about 7 feet to the floor with his left leg landing on a bin cap. He was hospitalized with a compound fracture to the lower left leg.",1
"Two employees were in a gated area of the holding pen at Rosendale Dairy replacing a motor and gearbox for a waste auger. The injured employee was struck by the hinged gate enclosing the auger pit when the fork from the skid steer did not clear the side of the gate. The gate was pushed into the enclosure, striking the injured employee on the forehead and causing him to fall backward and hit his head on the concrete wall. The employee was hospitalized for a subdural hematoma and an epidural hematoma on left side of the head.",1
"An employee was retrieving tools from the roof of a residential home when they fell onto the concrete driveway, resulting in head trauma.",1
"An employee had been sanitizing a portable conveyor belt. While moving a section of the conveyor system, the employee's right index finger was caught by a tire of the conveyor system and their fingertip was amputated.",0
"An employee was walking down stairs with a box of equipment in hand. The employee tripped and fell at the last step, suffering fractures to the right ankle and tibia.",1
"While stripping concrete forms, an employee tripped and fell onto a frost pin resulting in an injury that required hospitalization.",1
"An employee was assisting with cleaning the distributor truck's tank. The distributor tank was still hot causing a rapid release of stems, burning the employee and causing them to fall from the tank to the flatbed work truck. The employee sustained burns to the face and hands, a head contusion, and a laceration above the right eye.",1
"While walking on a designated walkway, a Clariant employee was struck by a construction forklift that was en route to pick up cylinders. The employee sustained soft tissue damage to their lower right leg.",1
An employee was driving a forklift. The forklift skidded on wet concrete while turning and stuck a skid of material. The employee's left arm was caught and fractured between the forklift and the skid.,1
An employee was using a mitering machine to cut an oversized piece of wrapping material. The blade of the machine lacerated the employee's right index finger resulting in hospitalization. The machine was not guarded at the time.,1
An employee was using emery (sandpaper) to shine a steel shaft on a rotating lathe. A glove on the employee's right hand got caught on the sandpaper and the employee's arm became wrapped around the lathe. The employee sustained two fractures to the right forearm.,1
An employee was struck in the chest with a bar. The employee was hospitalized.,1
An employee was limbing and bucking logs when he was struck by a log that a log loader was moving to the road. The employee sustained a broken femur.,1
"On September 22, 2021, an employee was pulling a box of pillows across the floor when they tripped and fell to the floor. The employee was hospitalized with a fractured pelvis.",1
"An employee was operating equipment that produced wooden stakes. Lumber became jammed, and as the employee tried to free it, his left little finger was caught between the end of a piece of lumber and the side of a conveyor belt. The finger was pinched and required partial medical amputation.",1
"On September 22, 2021, at approximately 11:30 a.m., an employee was sweeping a dock floor when he fell approximately 4 feet to the ground. The employee was hospitalized for a fractured tail bone.",1
The injured employee was standing on a precast plank. A weld was cut from the plank causing it and the injured employee to fall about 10 feet to the ground. The employee was hospitalized with a fractured hip.,1
"An employee was filming crop harvesting when a combine knocked her over. The combine wheel then ran over the employee, causing a crushed pelvis, a broken bone in her face, and bruising.",1
"An employee was preparing to connect drilling pipe when the elevator came open causing the 30 foot by 4.5-inch drilling pipe to fall onto the employee. The employee was struck on the shoulder, ribs, and back area, and sustained a punctured lung. The employee was hospitalized.",1
An employee was removing chicken parts from the breast processor when the blade of the breast processor amputated the employee's fingertip.,0
"Two employees were fabricating a 50,000-gallon steel storage tank and were putting the last head on the tank. One employee was on top of the tank, jacking the head seam tight, when the lug where the jack's hook was attached tore free from the weld on the shell. The jack fell and struck the injured employee, who was on the ground, in the head causing his hard hat to come off. The injured employee became disoriented. Moments later, the chain, hook, and lug also fell and struck the injured employee. The injured employee was hospitalized with a skull fracture and head laceration.",1
"An employee was traveling for business. He had departed a customer location and stopped at the gas station to refuel his vehicle. He was assaulted and car-jacked at gunpoint by three assailants. The employee was hospitalized with bleeding between the brain and skull, and also required stitches to his lip.",1
An employee was placing product on a conveyor when her left middle finger was caught between the product pusher and the rails (sides) of the machine in a 1 1/2-inch gap. She suffered a partial amputation to the finger.,0
"An employee who had descended a co-worker's forklift was knocked to the ground by the forklift's counterweight as it drove away. The left-rear tire of the forklift ran over the employee's lower right leg, resulting in a laceration.",1
An employee was cleaning up a jobsite and lifted a concrete manhole cover when the cover crushed three of the employee's fingers resulting in amputation.,1
"An employee was transferring grain when their left hand contacted a running grain auger, resulting in a fractured middle finger that required hospitalization.",1
"On September 23, 2021, an employee was assisting the operation of the horizontal band saw with the carousel bun loader. The employee was manually pushing the carousel wheel that was stuck and not engaged on the drive wheel when their right little finger became caught in between the bottom of the carousel frame and the guide wheel pinch point resulting in a partial amputation.",1
"An employee was helping to train two new employees on how to change hammers in a hammer mill. The employees conducting the training were removing the hammers, which requires pushing a steel rod through the hammers and collars to push out another rod that holds the components in place. Employee 1 was removing a collar that was stuck when Employee 2 pushed the rod in. Employee 1's left middle finger was pinched between both rods, and his finger was partially amputated. The mill was locked out at the time of the incident.",1
"On September 23, 2021, an employee was assisting a co-worker with removing slings from a die when the crane holding the sling moved, causing the sling to swing toward the employee. The employee reached for the sling and his left thumb was caught between the sling and the die, resulting in a fingertip amputation.",0
"An employee was preparing to transfer electrical cable from one spool to another. As he was guiding the cable, it pulled his right hand into the spool. He suffered a fingertip amputation.",0
"On September 23, 2021, an employee was attempting to pull a gaming chair off the shelf for a customer when she lost her balance and fell. The employee was hospitalized for a broken femur.",1
An employee was installing a fence when they were shocked by electrical cords. The employee was hospitalized.,1
"An employee was attempting to remove a piece of wood stuck in a trim saw when his glove became caught, pulling his fingers into the blade. The employee's middle and ring fingers were partially amputated.",0
"An employee was standing on a rolling staircase ladder to retrieve an item from an upper shelf. The employee missed a step and fell from the ladder to the floor, fracturing his hips and ribs.",1
An employee was assisting moving carcasses into a cooler. A 420-pound carcass fell off the southwest rail and broke the employee's left leg. The employee was hospitalized.,1
"An employee was about to begin working on top of a four-story apartment building. As he grabbed his lanyard to tie off, he slipped on wet plywood and fell from the building to the ground. He suffered a broken left hand and a strained right hand.",1
An employee was cutting laminate on a table saw. The blade amputated the employee's thumb and severely lacerated the palm.,1
An employee was rolling out underlayment paper on the roof of a mobile home when he fell to the ground. The employee broke both ankles and was hospitalized.,1
"As an employee was climbing down a ladder from the second roof level to the first roof level. The base of the ladder slipped, causing the employee to fall to the first-level roof. The employee sustained fractured vertebrae in their back.",1
An employee was on a ladder to fix a steam header valve that was leaking. The employee was sprayed on the face/neck by hot condensate. He then jumped off the ladder and cut his leg.,1
"An employee was standing near a scissor lift when a part of the lift hit him, resulting in a broken arm.",1
"An employee was climbing out of a semi-truck when the door handle broke and the employee fell 4 feet to the ground, resulting in a broken right leg.",1
"A maintenance employee was attempting to unclog a bag sealer when his left index finger was caught between the heating element and clamp device, resulting in a partial amputation of the fingertip.",0
"An employee stepped onto a steel grate covering a 24-inch by 24-inch, 18-inch-deep area of a longer concrete pit containing heated water. The grate shifted and gave way, and the employee stepped into the hot water resulting in thermal burns to both lower legs.",1
An employee was delivering a load at a customer site when he lost balance and fell onto a forklift. The employee sustained injuries to his back and hands.,1
An employee was working with sheet metal in the fabrication shop. A piece of sheet metal on a table shifted and rolled onto the employee's right hand amputating the index finger.,0
"An employee was operating an automatic welding machine. While retrieving a part, the arm contacted the employee's thumb resulting in a partial amputation.",0
"An employee's finger became caught between a piece of metal and a brake press machine, resulting in a partial amputation.",0
"An employee was working on an extension ladder when he slipped and fell 7 feet to the ground, resulting in a broken right ankle.",1
"An employee was stamping part nomenclature on metal elbows. The employee's right index finger was caught between the part and the die, and the fingertip was amputated by the stamping machine.",0
"An employee was preparing to lift a 25,000-pound forging with an overhead crane using a spreader bar and a set of chains. The chains on one side of the forging snagged on set downs and would not slide into position. The employee used his right hand to position the chains to the center of the load when the crane began to lift the forging. The employee's right middle finger was caught between the chain and the forging, resulting in amputation to the first knuckle.",0
An employee tripped and fell while walking down stairs. The employee suffered broken ribs.,1
"An employee was drilling out an anchor bolt when debris struck his eye, resulting in an eye injury.",1
An employee was operating a metal folding machine when their hand was caught between the metal and the folding arms. A fingertip was amputated.,0
An employee was completing housekeeping tasks and moving electrical motors when they began to develop lower back pain.,1
"On September 24, 2021, at approximately 2:30 p.m., two employees were clearing weeds and brush from the exterior of the shop building. The employees found several pieces of a small, cord-like material and brought them inside the shop to investigate. An employee attempted to cut into the material with a grinder. The material turned out to be a detonation cord that exploded when it touched the grinder. One employee suffered amputations to fingers on his left hand and was hospitalized. The second employee suffered cuts, as a result of the explosion and shrapnel.",1
"An employee was raising a car on a lift when their right-hand fingers were caught between the car and the lift rail, resulting in amputation of their index and middle fingertips.",0
An employee was pulling a piece of meat out of a meat grinder when they suffered lacerations to their right index finger.,1
An employee was pulling meat from one of a mixer's openings when the mixing blade caught her glove and pulled in her right middle finger. She suffered an amputation to the fingertip.,0
"An employee was using a pneumatic tool to remove U-bolts on a truck. The tool pinned his left hand, causing a fluid buildup injury.",1
"An employee was attempting to close a stainless steel garbage can door, which was stuck on a no-slip mat in front of it. The employee's right index finger was caught in the door, and her fingertip was amputated.",1
"On 09/24/2021, at approximately 4:30 PM, three employees were cleaning a toffee cooker. The toffee cooker consists of an upper plate and a lower plate that are raised and lowered to separate the cooker. The toffee cooker was locked out/tagged out. Once the toffee cooker was cleaned, the gasket was installed and it was ready to be closed up. Lockout/tagout was removed. The injured employee reached to adjust the seal as the lower piece come up into place and their right little finger got caught between the lower plate and the alignment pin, resulting in an amputation below the first knuckle. The machine was not guarded at the time.",1
An employee was pulling a ladder cart through a door. Her right middle finger was caught between the doorframe and the ladder and was amputated.,0
"An employee was exiting a warehouse when she lost her footing on a moist floor and fell, striking her back and the back of her head. She was hospitalized.",1
"An employee was unclogging a dough depositor and funnel device on a production line when their middle finger got caught in the device, resulting in a fingertip amputation.",0
"An employee was using a water hose to spray and clean pulp out of a large drum in a bleach plant area. The employee was exposed to chlorine dioxide from the pulp, became ill, and began to cough. The employee was hospitalized.",1
"An employee was clearing debris from a pasta machine. The employee's fingers contacted the cutting blades, which caused amputations to the left middle, ring, and little fingers.",0
An employee was driving a vehicle on airport tarmac. The vehicle struck a yellow cement pole and the employee suffered an abdominal injury.,1
An employee was unhooking a shackle and wire from a ship-to-shore crane spreader bar on a dock. The spreader bar flipper guide dropped down and struck the employee in the head. He suffered broken facial bones and was hospitalized.,1
"On September 24, 2021, at 8:50 a.m., an employee was driving a stand-up forklift when the forklift collided with palletized material. The employee's left foot was crushed under the lift, resulting in multiple toe amputations.",1
"On September 24, 2021, an employee was trying to unjam a machine. His left hand was caught in a rotary airlock valve (accessed through an inspection port), which pinched his middle finger. The finger was amputated up to the first knuckle. The machine was running at the time.",1
"An employee was in the back of a truck shoving pallets of plastics into the truck. As he was turning the skid, he missed a step and fell off the back of the truck to the ground about 4 feet below. He landed on his right hip, suffering a fracture to the hip that required surgery.",1
"An employee was adjusting a strap on a pipe that was being lifted by a hook when the strap broke and the pipe fell on the employee's steel toe boot, resulting in amputation of three toes.",1
"An employee was removing a pin from an excavator arm. The arm shifted laterally when the pin was released, causing the pin ram to swing and strike the employee's cheek and jaw. The employee suffered broken cheek and jaw bones.",1
An employee was retrieving a tool from his vehicle when the vehicle door closed on his left hand resulting in amputation of the little fingertip.,0
"An employee was stacking 1-by-3, 12-foot-long boards from the conveyor outfeed. His right middle finger was pinched between the guard and the links covering the chain as he was picking up the board from the chain conveyor resulting in a fingertip amputation.",1
"On September 24, 2021, an employee was shackling the hind leg of a hog and placing it onto a rail. The employee went to hang the hook on the rail when a pusher came into contact with the hook and began sliding it down the rail. The employee's left index finger got pinched between the pusher and edge of the guard for the shackle rail, resulting in an amputation to the distal tip of the finger.",1
An employee was installing helical pipe. His left index finger was inside a helical pipe extension when the drive head attached to the extension was activated. The extension spun and the employee's left index finger was caught between it and another helical extension. He suffered an amputation to the fingertip.,1
"On September 24, 2021, an employee was working at a lathe when the lathe's spindle caught the employee's right glove. The employee suffered an amputation to the right ring finger.",0
An employee was exposed to sewage while removing and replacing a sewer pipe. The employee became ill and was hospitalized.,1
"An employee was working on a backhoe. A boom struck the employee, causing an injury to the employee's left collarbone. The employee was hospitalized.",1
"Two employees were standing about 10 feet apart as one of them prepared to use a handheld grinder to cut a metal pipe. When the employee turned on power to the grinder, a piece of the cutting wheel flew off and struck the other employee, injuring that employee's face and eye.",1
"An employee was operating a stand-up forklift carrying a raised load. The forklift struck a structure above it in a warehouse. It fell over and landed on the employee, who suffered a laceration to an artery in the inner thigh.",1
"A temporary employee was detaching a hose from a tank when 180-degree water splashed out of the pipe, hitting the employee on the legs and resulting in burn injuries.",1
An employee was attempting to remove a board from a landing table when his foot became caught in the drive chain. The employee's toe was amputated.,0
"An employee was moving an oven on a dolly in a restaurant. The oven fell off the dolly and caught part of the employee's finger against the wall, causing a partial fingertip amputation.",0
"An employee had just removed an aircraft tire and was walking it to the tire rack. Another employee tossed the employee a tool, which caused the employee to drop the tire. The tire landed on the employee's right leg, breaking the fibula and tibia.",1
"An employee was clearing a metal pallet that was stuck on a filler line when a sensor triggered and the filler actuated, pinning the employee between the machine and the base layer of the pallet. The employee suffered four broken vertebrae and a fractured sternum.",1
"An employee was trying to collect an appliance/electronics rental payment. The renter's partner and the employee fought, and the partner struck the employee.",1
An employee had just stepped down from the roller he was operating to look at the back of it. His right foot was run over by a roller. His little toe was medically amputated.,0
"An employee was using a pedestal grinder to grind a piece of square metal stock that was 1/4 inch in diameter by 13 inches in length. The employee placed the piece against the grinding wheel when the piece and his gloved hand were pulled into the opening between the work rest and the grinding wheel, resulting in a partial amputation of the employee's left thumb.",0
An employee was standing on the driver-side front tire of a semi truck washing the windshield. He slipped off the tire and fell. He landed on the gravel road and his head hit the step of the truck. He suffered a broken lower-back vertebra and a head laceration that required stitches.,1
"An employee was balancing a fan wheel. As he tried to slow or stop the wheel, his right hand was pulled into a belt running on a shaft. His index fingertip was amputated.",0
"An employee working on a shipping vessel was discharging coils from the vessel hold. The employee slipped off a coil and fell. He sustained two lacerations to his head, a concussion, and a fractured rib.",1
An employee was prepping food when he dropped a can of tomato sauce. He reached out to catch the can and suffered lacerations to two of his fingers.,1
"An employee was evaluating a machine that was getting stuck. The employee climbed over the middle railing and top railing with a spade tool in hand. The spade tool moved back and forth and amputated the tips of the employee's index, middle, and ring fingers.",0
"An employee climbed the back of a grain trailer to help direct loading. Upon reaching the top, he fell off the back of the trailer. He suffered fractures to the left and right wrists, a head laceration that required staples, a lower back injury, and a brain bleed.",1
"An employee was cleaning excess material off the back end of a dump truck when the truck's tailgate closed. The employee's right middle and ring fingertips got pinched between the tailgate and dump bed, resulting in amputations.",1
"An employee was inspecting a blast gun to ensure it was working properly. High-pressure water from the gun struck the employee, resulting in a severe laceration on their left knee.",1
"Three employees were working on a high-pressure airline when the hose failed and released air pressurized at 4,000 psi. The ruptured hose struck one of the employees, who suffered a rib fracture, multiple contusions, fractures to the right middle finger, multiple lacerations, and acute hearing loss.",1
"A temporary employee was unloading a concrete bucket full of dirt when his hand got stuck on a lever that crushed his left thumb, resulting in a laceration to the first phalange.",1
"An employee was cleaning when they slipped and fell to the floor, resulting in an injury to their right hip.",1
"An employee was taking samples of soybean quality. One of the pneumatic probe openings was clogged with soybeans. While the employee used a 3-inch stick to clear the clog, the pneumatic probe engaged and the employee's left index finger was amputated.",0
"An employee was working in the retail area of a store when she fell, resulting in a broken hip.",1
An employee was filling up a fertilizer tractor. The equipment moved and the employee suffered a puncture to the leg.,1
"An employee was cutting and grooving a steel pipe. The cutting machine caught the employee's glove, amputated the tip of the employee's index finger, and lacerated the middle finger.",0
"An employee was working from a step stool to turn shelved products' labels to face forward and check the products' expiration date(s). As the employee stepped down from the stool, the employee's left leg caught the rubber covering the step. The employee's left hip struck the concrete floor in the resulting fall and was broken. The employee was hospitalized.",1
"An employee was clearing a jam in a machine. A board kicked back, struck him in the face, and broke his jaw. He was hospitalized, requiring surgery.",1
An employee was escorting a patient who was just in an altercation with another patient. The patient bit a finger on the employee's right hand. The employee's finger was amputated.,0
"Two employees were unclogging a plugged fryer oil line. Hot oil sprayed onto one employee, who suffered burns to the torso and legs.",1
"As an employee was inspecting a plane, he fell 7 feet from a step stand. He was found unconscious and bleeding from his head.",1
An employee was making a grocery delivery on a scooter when the scooter hit a bump on the road. The employee fell off the scooter and suffered a fractured collar bone.,1
"An employee was driving a tugger, connected to a full tread cart, down an aisle. The front right corner of the cart contacted the blunt end of a guardrail. The tugger turned sharply and stopped, causing the employee to fall off and strike his face on the guardrail. He suffered fractures to the cheek and around the eye.",1
An employee was unloading boxes from a trailer. A box fell and lacerated his head.,1
"As an employee was loading boards into a pallet machine, his left little finger was pinched between the gantry and the piece of wood he was holding and the distal tuft was amputated.",0
"Employees were troubleshooting the bag sewing machine. While checking the tension on the belt, the pulley amputated an employee's right index finger at the first knuckle when the machine started.",0
"An employee was working under a truck. The truck fell off its lift and pinned the employee, who suffered broken ribs.",1
"An employee was on top of a tanker trailer, trying to vent the truck for loading. When the employee released the camlock fitting, the cap blew off and struck the employee in the face. The employee suffered a broken nose, a fractured orbit, and a laceration to the cheek.",1
An employee was installing a safety device for a hydraulic cylinder. The cylinder moved and caught his fingers/hand resulting in a fingertip amputation.,0
"An employee was bending over to pick up chicken parts from the floor in a leg deboning department. When he reached up and under the machine to get a chicken part, his hand was caught in the machine, resulting in a partial fingertip amputation.",1
"While walking into a motor pool for work, an employee tripped over a curb and fell. Surgery was required to repair a broken femur.",1
An employee was cutting a length of vinyl material with a table saw. The employee's hand slipped and the sawblade amputated the tip of his thumb.,0
"An employee was climbing a fixed ladder when they fell off the ladder and sustained broken bones, a laceration, and contusions.",1
"An employee was walking from her car to a building entrance. She tripped on a pallet and fell, suffering a fractured and dislocated shoulder.",1
"An employee was attempting to loosen a horsehead that was being removed via rigging from a pump. The employee's left hand was caught in a pinch point, resulting in amputations of the third and fourth fingers and a nailbed laceration on the second finger.",0
"In swatting at a bee near his face, an employee turned vigorously, suffered a broken left leg, and fell to the ground.",1
"On September 27, 2021, a maintenance employee was adjusting a chain on a machine. The chain went back in place on the sprocket and the employee's finger was caught between the chain and sprocket. The employee sustained an amputation to his finger.",0
"An employee was attempting to access the front of a third-party trailer to prepare to land a motor for a site. The employee stepped onto the passenger-side drop axle with his left foot and the drop axle was raised, causing it to roll. The employee lost footing and fell 46 inches to the ground. The employee's left ankle was fractured.",1
"An employee slipped on oil that was present on the floor. The employee fell to the concrete floor and struck his head, sustaining back and head injuries.",1
"An employee was walking on a platform when they fell, resulting in fractures to their right leg.",1
"While an employee was using a gangway to access a barge, the gangway collapsed and the employee fell 18 feet to the dry dock floor below. The employee suffered multiple injuries, including punctured lungs and severe head trauma.",1
"At about 10:30 a.m. on September 27, 2021, an employee was descending from the top of a green chain/transfer deck when he slipped and his leg got caught in the transfer deck's chain and sprocket. His leg was broken.",1
"An employee was using a forklift to unload containers from a truck. The forklift had to be pulled out of the trailer by another vehicle using a tow strap. As the employee was removing the tow strap, the other vehicle backed up, and the employee's forearm was pinned between the forklift and the truck. The employee suffered a contusion to the forearm.",1
An employee was operating a molding machine when a board got jammed in the machine. The employee shut down the machine and was clearing the jam when his right hand contacted the still moving cutting blades resulting in an amputation.,1
"On September 27, 2021, an employee was using a measuring tape and string to measure the alignment for the storm piping being installed inside a 4-foot trench. Afterwards, the employee stood on a drain manhole with a plywood cover on its opening. The plywood broke and the employee fell about 4 feet into the manhole, resulting in a bruised shoulder that required hospitalization.",1
"On September 27, 2021, an employee was sanding a bar on a lathe and amputated their right ring finger. The employee was hospitalized.",1
The injured employee was waiting for rigged up material to be taken away by the crane. A second employee lifted rebars with a forklift. Some rebars were under an H-type steel beam weighing 2500 lbs. and when lifted they tipped the steel beam over on to another beam next to it in a domino effect motion. The beam struck the injured employee and fractured both lower legs.,1
"An employee was standing on a flatbed trailer as a pump was being loaded. The pump caught his right ankle, causing him to lose balance and fall from the trailer to the ground about 3 to 5 feet below. He suffered fractures to his right ankle and the left side of his pelvis.",1
An employee was on top of a conveyor clearing a jam. A moving roller amputated their arm.,1
An employee was lifting steel plates with an overhead crane. The steel plates struck the employee in the face resulting in a broken jaw and fractured teeth.,1
"On September 27, 2021, an employee was cleaning a concrete pump at the wash out area. As he sat at the edge of the hopper, the auger inside the hopper engaged and his right leg was amputated below the knee.",0
"An employee was packaging meat with a plastic packing machine. The employee attempted to remove a jam in the machine when their left index finger contacted the machine's cutting blade, resulting in a 3/4-inch amputation.",0
"An employee was disassembling a piece of equipment. A stripped screw in a part the employee was removing broke free, and the part fell on the employee's left index finger. The finger was amputated.",1
"An employee was unjamming bars in a wire-drawing machine. His left little finger was crushed between two of the bars in the machine, and he suffered an avulsion and amputation to the finger.",0
"On September 28, 2021, an employee was removing a piece from a surge bin while approximately 10-12 feet above the concrete floor on an extension ladder when the ladder slid out from under him. The employee fell to the floor, resulting in a fractured left shoulder and hip.",1
The injured employee was near a co-worker who was adding shims to a panel when a concrete wall brace above him came loose and landed on the employee's side. The employee sustained multiple fractures.,1
"An employee was checking to make sure a structural unit was cut all the way through in order to flip the unit. While the employee cleared the unit top, a piece of flat bar, approximately 5 feet long and weighing around 60 pounds, slid off the corner of the unit. The employee attempted to catch the bar and sustained a laceration to his right ring finger.",1
"An employee had climbed a foundation wall to access a basement in order to remove pins and wedges. The employee jumped off the wall and landed in an over-dig area, fell back, and hit his head on the wall. The employee sustained head trauma.",1
"An employee was manually loading tools into the back of a parked work truck. A second vehicle backed into him, its bumper crushing his left leg against the parked truck's trailer hitch. He suffered a crushed tibia.",1
"An employee was exiting a company van when they slipped and landed on their right ankle, resulting in a fracture.",1
"On September 28, 2021, at approximately 5:30 a.m., an employee separated two paper rolls and began feeding the first paper roll into a die cutting press used to fabricate file folders. Each roll weighs approximately 900 pounds. The second roll tipped over and struck the employee's left leg, resulting in a fractured femur.",1
"An employee was beginning to unload a trailer. When he removed a crossbar in the trailer that had been stabilizing some packages during transport, the packages fell. He was knocked out of the trailer to the ground and suffered a broken leg.",1
"An employee was driving a pallet jack. It lost traction; when he tried to turn the handle to change direction, it would not turn and slid into a hallway rail. The employee's right leg was pinned between the rail and the jack, and his tibia and fibula were broken.",1
An employee was strapping a load onto a trailer. He fell from the top of the trailer to the ground about 42 inches below. He suffered fractures to both hands and required surgery on their C3 to C6 vertebrae.,1
"An employee was climbing from a scissor lift onto the roof of a building. The employee fell from the lift to the ground, suffering broken ribs, a bruised spleen, and a collapsed lung.",1
"As an employee was operating a brake press, their hand became caught in a pinch point, making contact with the material being bent and the upper die ram. Two of the employee's right-hand fingertips were amputated.",0
An employee was troubleshooting transfer equipment when they suffered a fractured finger and amputation of their right pinky fingertip.,0
"Two employees were removing a large plate from a precipitator. As the plate was moved, both employees' feet were pinched on each side of the plate and lacerated. One employee was hospitalized.",1
An employee has a known allergy to chemically made cinnamon. The employee smelled cinnamon on a coworker and had a severe reaction. The employee was hospitalized.,1
An employee was using a three-step ladder to change a light fixture. The employee fell to the ground and sustained a fractured hip.,1
"An employee was moving pallets of product from a cooler when their leg got caught between a forklift and a product rack, resulting in a laceration and left tibia fracture.",1
"An employee was nailing sheer wall while approximately 8 feet above the ground in the bucket lift of a forklift. The employee fell from the lift to the ground, resulting in a back injury and a gash on their head.",1
"An employee was operating a roller along the shoulder of a road to cone off a work area when they were struck from behind by a tractor trailer, resulting in orbital bone fractures, a broken collar bone, increased cranial pressure, spinal fractures, and respiratory problems.",1
"An employee was cutting boards with a popup saw. The saw pulled in a board while he was holding it, and the sawblade amputated his right index finger.",0
"An employee was clearing off a dining room table when their right knee gave out and they grabbed onto a bus cart for support. The bus cart moved and the employee fell to the floor, resulting in a fractured right hip.",1
"While walking to his workstation, an employee was stabbed by another employee.",1
"A logging line machine was hooking logs. An employee hooked the drag/turn onto a log, but it was on the end of the turn. The log started moving, slid down, and hit the employee, breaking both of his femurs.",1
"An employee was in a bucket working on a set of powerlines when he had to reposition his bucket truck. The knuckle of the boom truck hit a tree branch, which put the boom under tension. When the employee moved forward, the bucket jerked free from the branch, causing him to fall 15 feet from bucket to the ground and resulting in a broken L1 vertebra that required surgery.",1
"An employee was exiting a mobile shear. The employee slipped and fell to a lower level, suffering two broken ribs and a possible punctured lung.",1
An employee fell from a ladder and was injured. The employee was hospitalized.,1
"A truck driver was unloading material with a forklift when the forklift struck a pole and a piece of piping used to support the canvas covering on the load struck the employee, causing a concussion.",1
"On September 29, 2021, an employee was using a machine that cut holes in plastic caps. The machine's blade amputated the tip of his finger.",0
"An employee was working at mid-span between two telephone poles (that is, on a ladder set between the poles and designed to fit between them). The ladder slipped and the employee fell to the ground about 12 feet below, landing on his feet and shattering both heels.",1
"An employee was driving a powered industrial truck (PIT) onto a distribution truck when they contacted another PIT. The employee's left leg became caught between both vehicles, resulting in amputation of three toes.",0
"An employee was removing a service drop at a residential location while on a 28-ft. extension ladder. While ascending or descending the ladder, the employee fell to the ground. The employee was hospitalized with head and back injuries.",1
An employee in an inspection line was taking off a steering wheel cover using a pocket knife when he suffered a cut to the arm that included an artery.,1
"An employee was cutting meat products on a bandsaw. Product bound up in the saw, causing the employee's left hand to contact the sawblade and resulting in amputation of the ring finger.",0
"An employee was lubricating the conveyor chain when the conveyor turned on and his left index finger got caught in the chain, resulting in an amputation.",0
"An employee was helping fix a front entrance gate where a chain was twisted. The employee's right ring finger was caught between a rail guide and the rail, and the fingertip was amputated.",0
"An employee was trying to move a 900-pound bridge beam bearing. His left middle finger was pinched between the bearing and the dunnage it had been sitting on, and was partially amputated.",0
"An employee was assembling a four-arm clothing rack when she was hit in the forehead with a metal bar, resulting in hospitalization.",1
"An employee's hand got stuck in a crimping machine, resulting in partial amputation of her left ring finger.",0
"An employee was assisting with bending a rebar stirrup when their right thumb was caught between the stirrup, resulting in a fingertip amputation.",1
An employee was operating a grommet machine when it amputated the tip of his right thumb.,0
"An employee was climbing down from a tanker-type truck. The employee slipped from the tanker's fixed ladder and fell approximately 8 feet to the ground, hitting concrete and suffering fractures to the skull, a shoulder blade, and a back vertebra.",1
"An employee was setting up an A-frame shoe fixture. When the employee went to turn the fixture upright, it collapsed on his right index finger, resulting in an amputation.",1
An employee was chipping ceramic tile when a small particulate landed in his eye. He rubbed his eye and felt pain. The employee sustained an injury to his eye that required surgery.,1
"An employee was installing an overhead groove coupling while on the fourth rung of a 6-foot step ladder when he fell off the ladder onto a 6-inch piece of pipe that was on the ground, resulting in broken ribs and a punctured lung.",1
An employee was standing on a 12-foot portable ladder on top of a float while sandblasting the side of a barge. The employee lost his balance and fell approximately 6 to 7 feet to the float below. The employee sustained injuries to his left femur.,1
An employee was adding refrigerant to an HVAC unit when the compressed gas container failed. The employee sustained a lacerated and broken thumb and a facial fracture.,1
"An employee was returning to their work area after lunch when they slipped on a piece of chicken on a wet floor and fell, resulting in a right hip contusion.",1
"An employee was assisting a co-worker in flipping over a pallet jack when his left little finger was caught in the wheel of the pallet jack, resulting in a partial traumatic transphalangeal amputation , as well as a laceration on his left ring finger.",0
"A Zachry Industrial employee was pushing a cart up a walkway. A forklift struck the employee as it finished turning around, its back right wheel hitting the employee's left foot and causing multiple fractures.",1
"An employee was installing a steering unit on a forklift. As he was lowering the jack, his right ring finger was caught between the lift and steering assembly, resulting in an injury that required surgery.",1
"On September 20, 2021, at 2:00 p.m., an employee was retrieving his tools that were on top of a flatbed truck. The employee climbed down a 3-foot fixed ladder fixed when he fell from the ladder to the ground, resulting in a left leg fracture.",1
"An employee was stepping up into a front loader and preparing to move a bag of fertilizer. He fell backward, landing on the concrete below and suffering fractured lower back vertebrae and two fractured ribs.",1
"An employee was unloading a display case when it slid and fell on his right ankle, breaking it. He was hospitalized.",1
"An employee was unloading residual asphalt from a dump truck. The asphalt fell and struck his lower leg, resulting in a broken lower leg and dislocated ankle.",1
"An employee was changing a hose between a main tank and a nurse tank. The hose was cut and the valve failed, causing a release of anhydrous ammonia that the employee inhaled.",1
"An employee was helping a patient get out of an ambulette when the patient contacted the employee and the employee fell from the ambulette to the ground, resulting in a broken left knee.",1
"On September 30, 2021, an employee was operating a hole punch machine that is activated by a pneumatic foot pedal. The employee was punching holes completely through heater pans when a piece of plastic from one of the heater pans got stuck inside the hole. The employee attempted to remove the piece of plastic when the foot pedal was pressed and the machine blade struck his right index fingertip, resulting in an amputation without bone loss.",0
"A subcontractor was monitoring a wireline. Employees were filling lubricant to start a pressure test when a piece of iron flew out of the lubricant, striking the injured employee on the right side of the chest. The employee suffered three broken ribs and a hematoma on his liver.",1
An employee was attempting to unjam two metal tubes in a steel tubing machine using a pry bar. He lost his balance and fell 52 inches to the lower level. The impact with the steel grating below caused fractures to the employee's left-side ribs and lumbar region.,1
"An employee was helping a forklift move a stone slab. The forklift ran over the employee's left foot, breaking it.",1
"An employee was unloading a semi truck when he fell from the trailer, hitting the garage floor below. The employee sustained a head injury and lost consciousness.",1
"An employee was moving plastic dashboards when he fell to the ground and struck his head, resulting in a concussion.",1
"An employee was installing a new gear in a hand-operated flake mill and trying to line up the gear with a worm screw shaft approximately 18 inches long and weighing 30 pounds. The employee's left thumb was pinched between the shaft and the gear, resulting in a fingertip amputation.",0
"An employee was loading a dump truck using a mini excavator. The employee dumped the load and backed up when the mini excavator tipped over and leaned against a tree. The employee jumped out of the excavator and landed on the ground, resulting in a lower back injury.",1
"An employee was climbing a fixed-roof access ladder with a box of tools. When he attempted to reach up to the last rung, he fell 15 feet to the ground, resulting in a shattered tibia that required hospitalization and surgery.",1
An employee sustained dehydration while on patrol.,1
"An employee stepped on a tool on the floor and fell, suffering a broken and dislocated left elbow.",1
An employee fell about 9 feet from a 12-foot step ladder. The employee suffered five broken ribs and a punctured lung.,1
"An employee was re-roofing a roof when they fell approximately 17 feet to the ground, resulting in a fractured pelvis and broken ribs. Fall protection was not worn at the time of the incident.",1
"An employee was loading building materials onto a truck. As he stood in the bed, moving a knuckle boom crane's fork, the upright bar loosened and he fell off the truck. He suffered a neck/spinal fracture.",1
An employee was setting roof insulation around an opening. The employee fell through the opening and suffered broken ribs and internal injuries.,1
An employee slipped while climbing off a machine and fell backward. His head hit the floor and he suffered a skull fracture. He was hospitalized.,1
"An employee was picking up a piece of copper pipe when it slipped out of his hand. As he tried to grab it, his finger was pinched between the piece of copper pipe and a sharp end of a pipe connection coming out of a building. The employee suffered a torn tendon on his ring finger, resulting in hospitalization and surgery.",1
An employee was reaching for a piece of steel when he tripped and suffered a cut to his right wrist.,1
"An employee was walking alongside a forklift on his way to the exit door when the forklift turned and impacted the employee, resulting in a fractured hip.",1
"An employee was seated on a loader platform when the loader hit a bump and the employee fell to the ground. One of the loader's wheels then ran over the employee's right foot, resulting in a foot fracture.",1
"An employee was working ropes with one climber in a tree and three people on the ground. A rope and a pulley was connected to a branch to be cut. As the branch came down, the employee holding the rope was pushed forward and hit by the branch, resulting in a femur fracture.",1
"An employee was assisting a co-worker in removing the center bolt from the strut cap of a strut/spring assembly while the assembly was mounted and compressed on a spring compressor tool. When the bolt was free, the strut cap flew up and struck the employee in the face. The employee suffered a fractured septum and cheekbone, as well as a laceration on the upper-left cheek.",1
"An employee was on a lift when he released a lift control. The lift fell and struck his right elbow. The employee suffered a contusion and musculoskeletal injury to his right elbow, and bacterial infections on his right elbow and forearm.",1
"An employee was walking back to a store entrance from a parking lot. He tripped over a parking block and fell, his left side striking the sidewalk curb. He suffered contusions to the left side of the rib cage and the left hand/wrist.",1
"An employee was walking through the dining room when they slipped and fell on a wet spot on the floor, resulting in a fractured right hip.",1
"An employee was standing on top of a bulk feed semi trailer transferring feed from one trailer to another. The employee lost balance and fell to the driveway. The employee sustained lacerations to the head, non-surgical fractures of the T-11 and T-12 vertebrae, and a torn rotator cuff. The employee was hospitalized.",1
"An employee was guiding a concrete power trowel into the back of a pickup truck. The trowel was being lifted by a chain attached to a forklift. As the trowel was being lowered into the pickup truck by the forklift, the employee's right ring finger was pinched between the trowel handle and the side of the pickup truck bed, resulting in an amputation with no bone loss.",1
"An employee was adjusting a ram on a filter press by pulling on a press plate with a hook. The hook slipped, causing the employee to slip and fall 6 feet from an elevated platform. The employee struck the staircase and the floor. The employee suffered two broken wrists, a broken nose, and a concussion. The employee was hospitalized.",1
An employee was cutting plywood with a circular saw and amputated his right index finger.,1
"Two employees were cleaning a hose that contained hydrochloric acid. After rinsing the hose, it was placed in a tank with bleach. Hydrochloric acid remaining on the hose reacted with the bleach, exposing the employees to chlorine gas that made it difficult to breathe. One employee was hospitalized for inhalation chemical burns.",1
An employee was unloading freight when his right thumb was caught in a trailer's lift gate. The thumb was broken.,1
"An employee was operating a forklift on an assembly line while a co-worker operated a layer picker. The forklift was struck by the layer picker attachment, causing it to fall over. The employee suffered four broken toes, damage to their big toe nail, and soft tissue damage to the big toe.",1
"An employee was performing maintenance on a truck lift gate when it fell on his leg, resulting in a broken femur.",1
"Employees were removing electrical cables for replacement. When one employee cut a cable, the employee was shocked in the abdominal area.",1
"An employee was climbing down a 4-foot ladder, missed a step and fell to the ground. The employee suffered a left hip injury and was hospitalized.",1
"An employee completed a repair on the conveyor. He then reached under the conveyor and his glove got caught on the conveyor belt, resulting in multiple abrasions to his left hand.",1
An employee was loading a trailer with the flap raised when they fell into the belly of the trailer and fractured an arm.,1
"An employee was placing dough into a hopper that led to a proofing machine. The employee attempted to remove excess dough from the machine when their right arm contacted the sprocket and chain, resulting in a right arm amputation. The machine was in operation at the time of the incident.",1
"An employee was repairing a sight glass on a water holding tank and noticed a leaking pipe that needed repair. He stepped onto a 3-inch pipe and his wrench fell, causing him to lose balance. The employee fell onto a mixer motor and landed on the floor. The employee sustained a fractured left wrist, fractured left clavicle, and five fractured ribs.",1
"A longshoreman was working on the deck of a vessel. He attempted to climb atop a breakbulk piece using a rigging strap in order to finish rigging it for discharge. The employee's hand slipped and he fell approximately 6 feet to the deck, resulting in a fractured left forearm.",1
An employee was fueling refrigerated trailers when he felt a pain in his back and left leg and fell. The employee was unable to walk. The employee suffered two slipped discs in their back.,1
"An employee was putting air in a dump truck tire. The tire exploded, pushing the employee to the ground. He suffered an injury to the left shoulder.",1
An employee was helping pump liquid chlorine from a larger vessel into a smaller vessel. The employee developed chlorine exposure symptoms.,1
An employee was rigging up a workover rig when their left thumb was pinched between the stationary structure of the rig and amputated.,1
"On October 1, 2021, an employee was cleaning a floor when he slipped on water and fell. The employee sustained a hip fracture and was hospitalized.",1
"An employee was operating a golf cart when their left ankle got caught between the golf cart and the frame of an exit door, resulting in fractured toes that required surgery and hospitalization.",1
An employee was standing on a portable ladder and working on a light fixture when he received an electric shock from a secondary power source. The employee fell to the ground and injured their back.,1
"A crane operator was resetting a limit switch on an overhead crane. A cable and/or drum caught the operator's left leg, causing the operator to fall about 10 feet from the crane bridge. The employee's leg got entangled in the crane cables resulting in amputation of their left leg at the thigh. The employee was hospitalized.",1
"An employee was diagnosing a destoner pump to determine if it would spin freely. The tip of his right ring finger was caught between the belt and the sheave, and the fingertip was amputated.",0
An employee was climbing down a ladder when they fell to the ground. The employee's right leg and right arm were broken.,1
"An employee was reworking freight inside a trailer. The trailer fell and hit the employee in the left shoulder, arm, and ribs. He suffered a tendon injury in the shoulder and arm and four broken ribs.",1
"An employee was completing a roll change when a steel spacer fell and struck an employee's left little finger, resulting in a fingertip amputation.",0
"An employee was loading material from a dock onto a barge. A tugboat struck the barge. The employee was knocked off a ladder, hit the side of the barge, and fell into the water. The employee suffered broken ribs and a lacerated liver and was hospitalized.",1
"When an employee leaned on a window opening with guardrails, the rails broke and the employee fell through the opening to the driveway about 12 feet below. The employee suffered injuries to the neck, back, ribs, and aorta.",1
"On September 1, 2021, an employee was using a forklift to empty hoppers. The employee inhaled dust and fumes from the molten metal and was hospitalized.",1
"An employee slipped while entering a delivery truck, fell, and hit his head on the pavement.",1
"While securing tank caps, an employee fell from the side of a paint truck when their pipe wrench came loose. They landed on the asphalt surface of a parking lot. The employee suffered a collapsed left lung, contusions to the hands and face, neck pain, and was hospitalized.",1
"An employee was delivering a package to a resident when the resident's dog came up to the employee from behind and bit their left little finger, resulting in a fingertip amputation.",0
An employee was operating the tire building machine at the first stage of the cycle. The employee was holding a wire bead rope material utilized in the manufacturing process. The material became caught in the machine and pulled the employee's left hand into the machine while his foot was stuck in the operation pedal. The employee suffered amputation of the left middle finger at the middle knuckle and a left ankle dislocation with a fracture.,0
"An employee was lifting a 330-pound transformer onto the bed of a vehicle. The transformer was set down on the employee's right hand, injuring the little finger.",1
"Two employees were replacing a guard chute on a printed scrap baler. One of them was lining up the guard using his left hand when the counter door cycled into the open position, resulting in amputation of the tip of his middle finger.",0
"On October 2, 2021, an employee was repositioning a patient when she tripped over a mat and struck her head against the wall, resulting in a concussion.",1
"After backing up a truck to a receiving door to unload products, an employee was found unconscious near the rear of the truck. He had suffered a fractured skull, broken ribs on the left side, and a neck injury.",1
"An employee was climbing a ladder when it slipped. The employee fell to the concrete floor and suffered two broken hands. He was hospitalized, and required surgery on the right arm.",1
"An employee was squatting down to knock some rubber buildup loose on the inside of a diverter feed hose when the valve diverted in the direction of his left hand, pinching the tip of his left middle finger between the diverter feed hose and the diverter housing. The employee suffered a fingertip amputation.",1
"An employee tripped and fell in a hallway, landing on the floor and suffering a broken right knee.",1
"An employee was cleaning a trough with a cleaning bar when an auger caught the cleaning bar and the bar pinned the employee's right ring finger against the guard, pinching it and resulting in a fingertip amputation. The auger was not locked out at the time of the incident.",0
"An employee parked a forklift inside a trailer while unloading freight. The employee was adjusting deck bars loaded with freight when a deck bar and freight fell, knocking the employee into the forklift blades. The employee sustained a fractured jaw and lacerations on their mouth; the employee was hospitalized.",1
"An employee was chasing a baker's rack cart through a parking lot when they slipped and fell, resulting in a broken collar bone.",1
"An employee attempted to pull an ice bagging machine away from the stationary bin so that it could be worked on by maintenance. The machine tipped toward the injured employee while it was being moved, striking the employee's right leg below the knee. The employee's leg was broken below the knee and the employee sustained a fracture and partial dislocation at the T12 / L1 vertebrae.",1
"On October 3, 2021, at 6:00 p.m., an employee was struck by a moving steel billet, resulting in a lower left leg fracture.",1
A piece of unexploded ordnance at an Army range was disturbed and exploded. An employee suffered lacerations and fractures to the face.,1
An employee was walking to their car in the parking lot when a non-employee struck them with a bat. The employee sustained a head injury.,1
"An employee was slicing bread with a knife. The knife severely lacerated the employee's thumb, causing an amputation to the thumb tip.",0
"An employee was cleaning underneath a table when they struck their head on the table, resulting in a head injury.",1
"An employee was changing the butterfly end on a pneumatic, handheld paint gun containing a hazardous chemical when the trigger went off, resulting in a puncture wound on the employee's left index finger.",1
An employee was helping move a trough onto a table. The trough fell onto the tip of the employee's right middle finger. The fingertip was medically amputated.,0
"An employee was standing next to the outrigger beam of a crane. The beam retracted and pulled the employee's hand in-between two pieces of metal, resulting in amputation of the right ring fingertip.",0
"An employee was moving a portable plant rack, which was 7 feet high, 2 feet wide, and 4 feet long. The rack began to tip on the uneven ground. It and the potted plants on it fell on the employee, knocking her backward to the ground and causing a possible back injury. She was hospitalized.",1
"An employee was cleaning a mud pump. A retaining cap dislodged from the pump and struck the side of his head, causing a laceration and a head injury.",1
An employee was inspecting a residential roof when he lost balance and fell 12 feet to the ground below. The employee sustained a left forearm fracture.,1
"An employee was using a ladder to install gutters on a second-story roof. The employee fell from the ladder, hit the first-story roof and then hit the ground, resulting in a ruptured spleen and a pelvic/hip bone injury.",1
An employee was working to unplug a gutter drain. Water came out of the drain and the employee stepped backward and fell 2 feet to the ground. The employee's right arm was fractured above the wrist.,1
"An employee was helping a co-worker take out the trash to a dumpster near a loading dock. The employee fell off the loading dock and suffered a fractured back, lacerated head, and lacerated finger.",1
"A forklift operator stepped off a forklift as it was stopping. When he tried to step back onto it, it struck and injured his foot.",1
"An employee was climbing a fixed ladder in order to reach the platform of a machine when they fell from the ladder to the ground, resulting in a broken hip, a broken wrist, and a skull fracture.",1
An employee was using a ladder to service an air conditioning unit on a first-floor roof when he fell from the ladder to the ground below. The employee sustained rib and vertebrae injuries.,1
"Two employees were removing a well head bolt using hammers. The hammers hit each other, causing one hammer to shatter. A fragment of the hammer went under an employee's safety glasses, causing an injury to their left eye.",1
"An employee was leaving the deli and going to the bakery when they slipped on a wet floor and fell backward, hitting their head on the floor and possibly resulting in internal bleeding.",1
"An employee was unloading steel I-beams from a drill machine using an overhead crane when a stack of seven I-beams tipped over onto the employee, resulting in two broken legs below the knee that required hospitalization.",1
"An employee was moving a piece of round steel bar stock when he dropped it on his leg, resulting in fractures to his tibia and fibula. The employee was hospitalized for surgery.",1
"An employee was repairing/replacing a valve actuator when the valve turned, catching their left index finger and resulting in a partial amputation.",0
An employee was unloading a heat-treating furnace. Flames burned the left side of the employee's face.,1
"On October 4, 2021, at 8:20 a.m., two employees were using a hand pallet jack to move a trash dumpster to a crane bay. At the base of the trash hopper, there are two slots and a skid that allow a forklift to move the dumpster. Between the slots is a small metal pedal that allows the dumpster to slide forward. The employees attempted to insert the pallet jack under the skid, but the metal pedal was obstructing the forks of the pallet jack. Employee 1 reached down to lift and hold the pedal into position as Employee 2 inserted the forks. The forks pinched Employee 1's left middle finger, resulting in a fingertip amputation.",1
"An employee was returning a dog to its cage when the dog bit the employee's leg, causing a bite wound.",1
"An employee was exiting the cab of a semi-truck when he fell and landed on his hip, resulting in a hip fracture.",1
"An employee was working a security detail when they passed out and hit their head on the floor, resulting in an injury.",1
"On October 4, 2021, an employee was trying to lubricate a bandsaw blade when it caught the oil container he was using. The blade then lacerated the top of his right hand.",1
"An employee was climbing a ladder when it kicked out. He fell to the ground, suffering a concussion and abrasions, and was hospitalized.",1
"An employee was lining up 200-pound racks on a production line. His little finger was crushed between two of the racks, resulting in an amputation.",0
"An employee was changing a circuit breaker on a 240-volt circuit. An arc flash burned the employee's hands, and the employee was hospitalized.",1
An employee was cutting a wire rope on a plastic bale. The bale uncompressed and fell over onto the employee's left leg and ankle. The employee suffered a broken tibia and a left ankle dislocation.,1
"An employee was getting ready to set a piece of pre-cap on a parking deck that was being erected when he lost footing and fell to the level below. The employee's fall protection caught him as he fell and his leg struck against a wall brace, resulting in broken bones in his left foot.",1
An employee was examining a cat when the cat bit their left hand.,1
An employee was pouring concrete when they fell through a hole in the floor and hit the ground below. The employee sustained head trauma.,1
"An employee working to free a cow from a swing gate became tangled between the gate and the cow, resulting in fractures to the employee's left arm and wrist.",1
"At 3:20 p.m. on October 5, 2021, an employee was clearing a jam on a blower machine when the rotating drum crushed the employee's right hand. The employee was hospitalized and suffered amputation of their right index finger and the tip of the right middle finger. The thumb was also severely injured.",1
An employee was under a truck working to free a seized brake drum. The brake released and the truck rolled forward over the employee crushing their pelvis.,1
"A temporary employee was using a cane to walk toward his work station. The cane slipped out from under him and the employee fell to the concrete floor, resulting in a broken hip.",1
"An employee tripped and fell down three steps, suffering a broken right ankle.",1
An employee's hand became caught in a press machine resulting in an amputation.,1
"An employee was watering plants in the Garden Center when he slipped on a puddle of water and fell to the ground, resulting in a fractured hip.",1
An employee was troubleshooting a machine when two of their fingertips were amputated.,0
"An employee was standing near the back of a truck as a lift gate was being lowered from the truck. A table and folding chairs fell from the lift gate as it was being lowered and struck the employee, resulting in a broken leg.",1
An employee was plugging and abandoning a natural gas well when he was struck in the face by a 30-foot section of steel tubing. The employee sustained multiple facial fractures.,1
"An employee was operating an edge bander. As he tried to remove some material, the blade caught his left thumb just below the nail. He suffered an amputation to the thumb.",0
An employee extinguished a coffee pot fire and was later hospitalized for difficulty breathing and respiratory irritation.,1
"On October 5, 2021, an employee was using a horizontal bandsaw to cut bushings and amputated his left ring finger above the first knuckle.",0
"At 10:00 a.m. on October 5, 2021, an employee was climbing a portable ladder when it slipped out from under him. He fell about 10 feet to the driveway below, suffering head and back injuries. He was hospitalized.",1
"An employee was setting up a radon test in a vacant home. She fell on a step, her left side striking the floor. She suffered a hip injury and was hospitalized.",1
"An employee was cutting down a tree branch while on a ladder. The branch fell and struck the ladder, knocking the employee off of it. The employee struck the bumper of a parked vehicle and the ground after falling, resulting in a laceration to the chin and face, as well as four fractured ribs.",1
"An employee was adding a pallet of kitchen cabinets to a wrapper machine. The machine's rotating arm struck the employee in the chest, and the employee was hospitalized for liver and kidney injuries.",1
An employee was servicing a chili machine when the air jack being used to lift the machine failed. The employee was caught in the jack and suffered a broken leg.,1
"On October 5, 2021, an employee was unloading products from the back of a box truck. He was on the lift gate with a dolly full of beer boxes; when he pressed the descend button, the dolly began moving away from him. As he tried to catch it, he fell off the lift gate with the dolly and the beer boxes. He suffered injuries to his shoulder, back, and leg and was hospitalized.",1
"An employee was attempting to access the roof of a storage closet. The employee stepped from a rolling ladder onto a trough on the outer edges of the closet roof. He misstepped and his ankle rolled, causing him to fall to the concrete floor below. The employee sustained a broken right arm.",1
"An employee was on the ground, guiding a 20-foot-long, 6-inch pipe into a well casing. As the pipe was lowered (by a crane, using a nylon sling), it slipped, hitting the ground and the mud jack and eventually striking the employee. He was knocked into a nearby truck and suffered a broken arm.",1
"An employee was using a remote controlled overhead crane to position a steel chock measuring 3 feet by 2 feet onto a roll. The employee handled the crane remote with his right hand and the wire rope with his left hand when the wire rope caught his left thumb, resulting in an amputation.",1
"On October 5, 2021, an employee was servicing a metal forming machine. As the employee put a torque wrench on a fastener, it fell onto the employee's left thumb. The nail and flesh on the tip of the thumb were torn off.",0
An employee suffered a back injury while lifting kayaks. The employee was hospitalized.,1
"An employee was rolling a screen for a dry chemical manufacturing grinder down a flight of stairs. The rolling screen went out of control and he fell, coming to rest 18 steps below and suffering a broken left femur.",1
"An employee was working in a store's carpet department. A rolled-up carpet struck the employee in the face, causing a neck injury. The employee was hospitalized.",1
"An employee was assisting in putting a chain back on the roller of a standup forklift. When the chain moved, the employee's gloved hand got caught in the chain, resulting in amputation of the right little finger.",0
An employee was cleaning a printer when his right hand was caught between two rollers. He suffered an amputation to the little finger.,0
"An employee stepped back, tripped over soft sand, and fell, breaking his left leg.",1
"An employee was laying steel decking on a roof. The employee fell to the concrete floor about 10 feet below, suffering a head injury and facial fractures.",1
"An employee was changing out an underground transformer. The employee contacted the live transformer and sustained burns to their right hand, right forearm, and left thigh.",1
"An employee was adding a strand of bad wire to strands of existing wires that were being pulled onto a de-spooler. As the employee added the bad wire to the existing wires, the employee pushed down on the strands of wires which created a loop. The loop grabbed the employee's gloved left index finger and pulled the employee's left hand into the guides, resulting in a left index fingertip amputation.",0
"On October 6, 2021, an employee was working at a metal saw when a hydraulic clamp came down on it. The employee suffered an amputation to the tip of the left little finger.",0
"An employee was trying to unjam a press machine when his left glove became caught in the machine. The employee used his right hand to pull his left hand out, and both of his arms were caught in the machine resulting in amputation of both hands.",1
An employee was helping to secure a load onto a trailer when their left ring finger was caught between lumber and the forks of a forklift. Their left ring fingertip was amputated.,1
"An employee was carrying a stack of ceramic dishes in a dish room. The employee tripped over a bucket of sanitizer solution, stored on top of an upside-down milk crate. She fell to the floor, suffering a broken right hip and a lacerated right elbow.",1
"An employee was taking down a porcelain light fixture when the fixture broke and landed on the employee's forearm, causing a laceration.",1
"At 8:50 a.m. on October 6, 20201, an employee was positioned behind a metal shear to help hold a piece of material about to be cut. As the shearing machine was engaged, its vertically moving backstop pinched the employee's left arm against a table below, in place to catch clippings. The employee suffered broken bones just above the wrist and was hospitalized.",1
"An employee was removing an electrical box from a bailer. As they lowered the box to the ground using the forklift, personnel basket, and a come-along, they needed to adjust the load to get it to the floor. As the employee adjusted the come-along, the load shifted and the employee's wrist was caught between the basket and the box, resulting in a broken ulna and torn tendon.",1
An employee was strapping a load to the deck of an open trailer when the ratchet mechanism on a turnbuckle failed and the 3-foot-long load bar struck his abdomen. The employee sustained a contusion and internal injury to his abdomen.,1
An employee had been changing a vehicle's oil. The employee fell to the floor and suffered a head injury.,1
"An employee tripped on a step at a door and fell to the floor, resulting in a fractured left hip.",1
"An employee was cleaning a chute on a meat processing machine when the machine activated, causing an amputation to the employee's right index finger.",0
"An employee was peeling paint off trim on a garage. He fell from the edge of the roof to the ground about 8 feet below, suffering a spinal injury that required surgery.",1
"An employee was pulling wire with equipment and a 5/8-inch rope attachment. The rope snapped and struck him, causing bruises to the face and eye.",1
An employee was operating the trim saw machine when his gloved left middle finger got caught between the sprockets and chain resulting in amputation of the finger.,1
"An employee leaned against an electric pallet jack, causing it to roll forward and strike another employee in the right ankle. The second employee's ankle was broken.",1
"An employee fell on a concrete sidewalk, suffering a ruptured left kneecap tendon.",1
"The injured employee was using a forklift to move scrap tires into a warehouse and place them into a scrap trailer. Water spilled from the scrap tires onto the warehouse floor. While driving back toward the loading dock, the forklift's brakes were activated and the tires slid on the water. The forklift spun and struck two co-workers, knocking them approximately 4 feet off the dock. The forklift fell off the dock and landed on the injured employee's right thigh, resulting in a fractured leg.",1
An employee was bitten on the wrist by an insect. He went into anaphylactic shock later that day and collapsed. He was hospitalized.,1
An employee was washing rags in a sink when a door shut on his right index finger. He suffered a fingertip amputation.,0
"An employee was walking down a flight of stairs when she slipped on the third step from the bottom and fell, resulting in a fractured right hip.",1
An employee was looking through a stack of sliding glass panels. The stack of panels fell onto him and pinned him against the ground. He suffered a broken right wrist and right leg and was hospitalized.,1
"An employee was working with a forklift when their leg got caught in the forklift, causing the employee to fall and suffer a head injury.",1
"An employee was on a ladder putting up a poster on a glass front. The ladder started to slip. He jumped off, landed on his arm, and suffered a broken elbow.",1
"An employee was turning a corner in a powered industrial truck when his left leg became pinned between the truck and a protective bollard, resulting in an injury that required hospitalization.",1
"An employee was walking when they struck the back of a moving clamp truck. The employee was knocked to the side and fell to the ground, and their foot was possibly run over, resulting in a foot injury that required surgical amputation of the foot.",1
An employee was confronting a suspected shoplifter in a store. The suspected shoplifter dragged the employee into the parking lot; the employee struck the ground and suffered a broken hip.,1
"At 6:24 p.m. on October 7, 2021, an employee was unplugging a personnel carrier that was parked and being charged. The cart unexpectedly moved forward and pinned the employee's left leg against a support column. The lower leg was broken and the employee was hospitalized.",1
An employee was using a forklift to extract a pallet from an overhead rack. The truck's forks fell onto the employee.,1
"An employee was putting in labels on a top stock cart. While climbing down the three-step ladder, she fell from the cart onto the floor, resulting in a left wrist fracture that required surgery and hospitalization.",1
An employee was operating an industrial stapling machine and was wiping excess oil off of the tip of the machine when the machine stapled/lacerated a finger.,1
"An employee was removing grates from inside a parts washer containing about 12 inches of washing solution heated to 160-180 degrees. The employee slipped and fell into the washer and suffered second- and third-degree burns to his left forearm, both legs from the knee down, and his right hip.",1
"An employee was installing a truss 10 feet above the ground when he turned away from the truss and the truss fell. The employee was struck in the back and fell to the ground, resulting in two broken ankles.",1
An employee tripped over a piece of garage door in a warehouse. The employee fell to the floor and suffered a broken right hip.,1
An employee tripped on a step while walking into the bookkeeping area. His head struck the floor and he suffered a neck injury with a contusion.,1
An employee was operating a press when his left middle finger was crushed between its ram and face plate. The press was not guarded at the time.,1
"An employee was delivering a countertop slab. The employee tried to stop the swing of the slab when the inertia of the swing caused the tip of the employee's left thumb to be caught between the slab and the wood frame that the slab was delivered on, resulting in a fingertip amputation.",0
"An employee was moving an item on a conveyor belt. The employee's right glove was pulled into the guide, and her little finger was caught between the guide and the conveyor belt. The fingertip was amputated.",0
"After throwing sugar cane onto a trailer, an employee developed trouble breathing, due to heat exhaustion.",1
"An employee was walking when they fell to the marble floor, resulting in a right elbow compound fracture.",1
An employee began feeling ill from dehydration while completing a delivery route.,1
"Two employees were rotating a machine component (a heavy, steel machine part roughly in the shape of a rectangular bar) so it could be reinstalled. As they used a die cart lift to move the part from blocks to the machine table surface, the part continued to turn quickly; a protruding bolt caught the tip of one employee's left index finger against the steel work surface. About 4-5 millimeters of the finger were amputated.",0
"An employee was walking across a shipping and receiving bay door opening when they were struck by a powered industrial truck reversing out of the bay door, resulting in a broken left ankle.",1
"An employee was erecting a scaffold. A scaffold plank was being hoisted up when it fell, striking and lacerating the employee's forehead.",1
"An employee was assisting a courier to load a vaccine cooler container into the courier's vehicle. As the container was lifted and pushed into the vehicle, the employee twisted his torso and felt pain in the lower back. The employee was later hospitalized with a lower back strain and had surgery.",1
"On October 8, 2021, an employee was cleaning the pizza topping machine using a scrubbing pad when their right hand was pulled into a running conveyor belt and roller, resulting in a broken right hand. The belt and roller were unguarded at the time.",1
"An employee was cutting weld tacks on a wire drawing machine's motor hood. After the last weld tack was cut, the hood fell on the employee's right arm and broke it.",1
"A masonry worker was on a scaffold when a 2-by-4 broke, causing the employee to fall to the ground and suffer two broken arms.",1
"An employee was climbing down from an 18-wheeler tractor that was jacked up on a tow truck. The employee fell off the steps to the curb, suffering broken ribs.",1
"An employee was working on electrical floor boxes when a boom lift ran over his right leg, breaking his femur.",1
"An employee was moving a granite slab with a gantry crane. When the slab was put on the ground, the crane's clamp hit another piece of granite and released the slab, which struck the employee. The employee suffered a punctured lung and broken ribs.",1
An employee was loading a pallet jack when a spider bit him on the face. He was hospitalized.,1
An employee was cutting an ox tail on a band saw. The saw caused an amputation to his right index finger.,1
An employee was using an automatic pipe threading machine. He attached a 7-inch pipe to the other side of the elbow and started the machine. His right index fingertip was crushed between the pipe and the machine's left support arm.,1
"An employee was operating a ride-on pallet jack near a loading dock. The pallet jack drove over an uneven surface, causing the pallet jack to eject the employee onto the floor. The employee suffered a broken lower right leg.",1
"An employee was working on a pizza packaging line. The employee adjusted the side rail of the line and his ring finger got caught in the drive chain, resulting in an amputation of the distal end of the finger.",1
An employee was stabbed while working at a hospital. The employee was hospitalized.,1
"On October 8, 2021, an employee was on the back side of a truck, giving the driver directions to back up the truck to get close to two garbage cans. The truck struck him, causing fractures to his pelvic bone and sacrum. He was hospitalized.",1
"An employee was herding cattle into a chute. A cow kicked a nearby door, which slammed on the employee's left little finger and amputated the fingertip.",0
"An employee slipped and fell while walking around a car, resulting in a sprained ankle.",1
"An employee was working on an HVAC unit on a roof. The employee fell backward through a skylight, landing 20 feet below and suffering head and spine trauma.",1
An employee fell through a piece of fiberglass while on the roof of a building. The employee suffered broken bones.,1
"An employee was using a hand-held pneumatic grinder to do a vertical grind of a metal gear rack when the griding disc flew off and hit the employee's left shoulder, resulting in a laceration that required hospitalization.",1
"When an employee opened the doors of a trailer, a dislodged, packaged dryer fell out of the trailer onto his neck and head. He was hospitalized.",1
"An employee was working on a conveyor that was under lockout. The moving parts of a nearby conveyor pulled in a rag he had wrapped around his left hand, and his index fingertip was amputated. The operating conveyor was not guarded at the time.",0
"An employee was lubricating belt drive pulley components in an air handling unit. A belt and pulley caught the employee's left ring finger, causing the amputation of the fingertip.",0
"An employee was transferring 98% sulfuric acid from the receiving tank to the cutting tank. At the completion of the transfer, the employee was closing a valve and a section of piping failed. The employee sustained chemical burns to their neck and right wrist.",1
"An employee was conducting housekeeping activities when she fell, resulting in a broken hip.",1
"An employee was unloading an aircraft service cart when it fell over, causing her to lose balance and fall. She suffered a back injury.",1
An employee was inspecting wildlife habitat near soil and erosion control socks on a construction worksite when they sustained a venomous snake bite that required hospitalization.,1
"An employee collided with a forklift while turning around. The employee suffered a broken left ankle/foot/kneecap, as well as swelling to the right ankle.",1
"An employee was injured when two, 19-inch diameter, 16-foot-long aluminum
billets weighing approximately 7,000 - 10,000 pounds each, rolled off the forks of a fork truck while he was stacking steel I-beams as spacers so that the aluminum billets could be placed in the homogenization oven. The fork truck lost hydraulic power to the forks which were holding the billets. This caused them to tilt forward (down) and strike the employee. The billets had an approximate average temperature of at least 500 degrees Fahrenheit. The employee suffered second degree burns to the left hand, a fractured and displaced left ankle, a left distal fibular fracture, multiple fractures on the left and right feet and toes, and third degree burns from the ankle to the waist of the left side. The employee was hospitalized.",1
"An employee was putting a chain back onto a chain and sprocket mechanism when the glove on his right hand got caught in the mechanism, resulting in an amputation of the right index fingertip.",1
"An employee was trying to pull trim on rollers. His left wrist and fingers were pinched by the edge rollers, causing fractures to the wrist, the little finger, and the ring finger.",1
An employee was cutting fish with a bandsaw. The saw amputated the tip of his left index finger.,0
"An employee was removing twist locks from a shipping container as it was landed on a bomb cart. When the container came to rest, her finger was pinched between a twist lock and the corner casting of the container. The employee's fingertip was amputated.",0
"An employee was placing cases of products on pallets on a grocery shipping line. While he was between two pallets, adjusting a case on one of them, a pallet jack moved to pick up one of the pallets. The employee was caught between the two pallets and suffered a sprained ankle, two broken ribs, and a punctured lung. He was hospitalized.",1
"An employee was moving a cylinder assembly with a crane. The employee's hands were between the barrel of the cylinder and the piston. When pushing on the assembly with their hands, the piston fell back into place, catching the employee's right middle and ring fingers between the barrel and the piston. The right middle fingertip was amputated.",0
"An employee was welding a tank battery in the field when the welding torch ignited flammable gasses, causing an explosion that resulted in second and third degree burns to both hands and their face.",1
"On October 9, 2021, an employee fell while climbing down a scaffold ladder. The employee landed on the floor and suffered five broken ribs, a collapsed lung, a broken jaw, and a fracture to an eye orbit.",1
"An employee was driving an electric pallet jack and lost control on a wet floor. The employee fell out of the pallet jack, resulting in a broken right tibia.",1
"A flammable mix spilled on an employee's leg during forest firing operations. Afterward, air entered the employee's trouser leg at the cuff and, with an ignition source present, the vapors within the trouser leg ignited. The employee suffered second-degree burns to the right leg.",1
"An employee driving a forklift and struck a parked forklift. The employee's left ankle was pinned between the two forklifts, resulting in three fractures.",1
An employee was walking down a hospital hallway carrying a bundle of linens when they received an insect bite.,1
"An employee was helping a resident in a wheelchair. She tripped over the wheelchair's front right wheel and fell, landing on and injuring her right hip. She was hospitalized and underwent surgery.",1
"An employee was driving a forklift when it collided with a steel storage rack system. His right hand was pinned between the shelves and the forklift's overhead guard, and he suffered fingertip amputations.",0
"Two employees got into an altercation while loading a work trailer. One shot the other, and the injured employee was hospitalized.",1
"At 6:40 a.m. on October 10, 2021, an employee entered a client's bathroom, slipped on liquid and fell on the floor, suffering two broken bones under the right knee.",1
"An employee was loading a tire onto a press. The tire fell on him as he was putting it in a loading chuck, and he suffered a spinal injury.",1
"An employee was checking the water levels in an ash discharger. When the employee opened the discharger's viewing door, hot ash and gas were propelled outward. The employee suffered second-degree burns on the face and neck, as well as first-degree burns on the forearms.",1
"An employee was cleaning a clogged machine when a finger contacted rotary blades within a pipe on the machine, resulting in a partial amputation.",0
"An employee was unhooking a trailer from a tractor trailer. As he was using a fifth wheel puller, he slipped and fell to the trailer yard ground, suffering a broken hip. He was hospitalized.",1
An employee fell in a client's home. She suffered broken back vertebrae and was hospitalized.,1
"On October 11, 2021, an employee was installing a new tank into a pit when the strap holding the tank broke. The tank rolled into the pit and the employee was crushed between the wall of the pit and the tank, resulting in contusions and a broken hip.",1
"An employee was standing beside a stack of steel beams that had been lifted with an overhead crane. After trying to move the chain with the hook away from under the stack, the employee raised the crane. The chain hooked back onto the beams, causing them to fall onto the employee and to fracture both legs.",1
"An employee was using a forklift to place a die into equipment when the die slipped off the forks and crushed the employee's right hand, resulting in hospitalization.",1
"An employee was placing rigging hooks on a rebar mat to be lifted by a forklift. The rebar mat became stuck and when the employee went to free the mat, it suddenly came loose and pinched his left middle finger between two rebar mats, resulting in a crush injury and a laceration that required hospitalization.",1
An employee was cutting wood using a table saw. The sawblade amputated the employee's middle finger. The saw was not guarded at the time.,1
"An employee was delivering mail when they stepped off a front porch, heard a pop in their knee, and fell to the ground, resulting in a broken femur.",1
"On October 11, 2021, an employee was using a magnet to load a piece of 3/8-inch material onto the entry rollers of a machine. The load fell off the magnet and onto the employee's left foot, breaking multiple toes. The employee was hospitalized.",1
"A temporary employee opened the doors of a trailer containing empty wooden pallets. The pallets fell and struck him on the left shoulder, injuring the shoulder and his lower back.",1
An employee placed a pack of bundled wood on a tilt conveyor. The wood fell off the conveyor and onto the employee. The employee sustained a broken nose and blurred vision.,1
An employee was using a circular saw when it caught his finger and amputated the fingertip.,0
An employee was trying to descend from the first story of a building under construction. He fell to the ground about 12 feet below and suffered a head injury.,1
An employee sustained a distal amputation of their right index finger.,0
An employee fell off a 4-foot ladder.,1
"An employee was guiding the bucket of a backyard machine as it was being offloaded from the trailer on a residential street. The bucket caught the trailer as it was unloaded, causing the bucket to rotate and create a pinch point between the bucket mount (a steel bracket) and a hydraulic strut. The employee's left hand was caught between the top of the bucket and the hydraulic strut, and his index fingertip was amputated.",0
"At about 10:00 p.m. on October 11, 2021, an employee was cleaning a pressurized paint gun. The gun activated while his left ring ringer was in front of the paint nozzle, which injected paint and solvent into the finger.",1
"An employee was coming down a 10-foot step ladder. She fell at the last rung, landing on her right knee and suffering a broken kneecap.",1
An employee was cutting a tree branch from a ladder. The employee fell from the ladder and suffered a back injury.,1
"An employee was rearranging boxes on pallets. The employee tripped over a forklift's forks, fell to the concrete floor, and suffered a skull fracture.",1
"An employee was working under a motor home, jacking it up to remove a part. The motor home's suspension air bag partially deflated, causing the vehicle to lower onto the employee. The employee suffered broken ribs and a collapsed lung.",1
An employee was ripping a 1-inch piece of wood down to 3/4 inch using a table saw. The sawblade amputated the employee's middle finger.,1
An employee was repositioning the forks on a rough terrain forklift. His hand slipped and the forks crushed his left middle finger. The finger was medically amputated.,0
"On October 11, 2021, an employee was outside a gas kiosk cleaning its windows. A vehicle struck her as it pulled up to the pump. She suffered multiple fractures to the left leg.",1
An employee's right hand entered a vacuum blower. The blower fan amputated one of the employee's fingertips.,0
"An employee tripped over a clothing rack while walking, falling and suffering an injured right hip.",1
An employee was moving the base of a crane when it fell on his finger. He suffered an amputation without bone loss.,0
An employee was installing an empty cylinder onto an assembly body support bracket. The cylinder slipped and caught the employee's left index finger against the bracket. The employee suffered an amputation just below the nail.,1
An employee was using a drill when it injured his left little finger. He suffered an amputation to the finger.,0
An employee was using an upcut saw when its blade cut his right hand. He suffered a laceration to the index finger and an amputation to the thumb.,1
"An employee was climbing up a rough-terrain crane. He hit his hard hat on the jib above him, lost his balance, and fell to the crane deck and then to the ground about 4.5 feet below the deck. He suffered rib fractures.",1
"An employee was rolling the chair she was sitting in toward a counter. The wheel of the chair locked up, and she fell from the chair to the floor. She suffered a broken left femur.",1
An employee was fitting a wheelchair to a client when a dog attacked her. She suffered a broken arm and lacerations.,1
An employee was trying to free up a rotary air lock that had seized due to rust. The chain slipped over the sprockets and pulled the employee's ring finger between the chain and the sprocket. The employee suffered a partial amputation to the fingertip.,1
"An employee was replacing a filter on a mixer when a valve closed, amputating his left index fingertip.",0
"An employee was moving pallets with an electric pallet jack. The pallet jack caught his right foot and ran it over, severing a tendon on the left side. He was hospitalized.",1
"An employee was taking sales orders and walking from the back of the building when they tripped over an empty bun tray and fell to the ground, resulting in a displaced left femoral neck fracture.",1
An employee was ratcheting a piece of equipment to a truck. He fell off the back of the truck and his head struck the pavement. His skull was broken above the ear.,1
An employee was putting an empty cage cart into a staging area. The cart struck a building support column and pinned the employee's left little finger against the column. The employee suffered an amputation to the finger.,0
"An employee fell from a roof and landed on his left foot, suffering a broken tibia and fibula. He was hospitalized.",1
An employee tripped over a cement block in a parking lot. The employee was hospitalized.,1
"An employee was preparing a golf course for setup. While picking up trash, the employee slipped and struck a work cart, suffering a broken arm.",1
"On October 12, 2021, an employee was reaching to retrieve a dropped bolt starter, which had landed in a tray under the rollers on an assembly line. The rollers caught the employee's bangs and removed skin from the employee's hair line to below the nose.",1
"An employee was reassembling a deli slicer. The slicer cut the employee's finger, causing a partial amputation.",1
"An employee was flagging as a crane lifted a 15,000 lbs. transformer into a building. The transformer slid off the skates and crushed the employee between the transformer and a structure resulting in multiple fractures. The employee was hospitalized.",1
A temporary employee tripped and fell on pavement in a parking deck area. He was hospitalized.,1
"An employee was loading a trailer with boxes of product. While bending over to place a box at floor level, the employee hit a stack of boxes. One fell from the stack and struck the employee in the back of the head.",1
"An employee picked up a handbasket and turned to walk away when she fell to the floor, resulting in a fractured right femur.",1
"An employee exited an office trailer and fell about 42 inches to the ground, suffering a broken ankle and knee. The employee was hospitalized.",1
"An employee was working at a frying station in a building. A vehicle struck the building from the outside, causing the frying station to overturn and cover the employee with hot grease. The employee suffered burns.",1
"An employee was troubleshooting a problem on the screen deck of a batch plant. To determine if the problem was mechanical or electrical, the employee locked out the system and tried to jog the belts by hand. When he tugged on the belt, the eccentric shaft counterweight swung down, driving the belt toward the sheave. The tips of his right ring and little fingers were pinched between the belt and the sheave, and the ring fingertip was amputated just above the first knuckle.",0
An employee was feeding a 1-by-4 board into a shaper machine. The machine's blade amputated about 1/4 inch from the tip of the employee's left ring finger.,0
An employee was working on a main distribution panel (MDP) when an electric shock resulted in burns that required hospitalization.,1
"An employee was leaving a truck after parking it. The employee's foot caught the top step from the cab, and he lost his balance and fell. He suffered a broken femur and hip.",1
An employee was putting food items away. The employee bent over and stood up when she felt pain in her back due to a pulled muscle.,1
"An employee was carrying an evening gown. She tripped on the gown, fell forward, and suffered two broken wrists. She was hospitalized.",1
"An employee was operating a yard truck. The truck cabin was lifted by a crane and the employee fell out, landing on the hard concrete below and suffering a broken collarbone and multiple hematomas.",1
"At 2:30 p.m. on October 13, 2021, an employee was on top of a pump truck, replacing the cone insert on the cyclone tank. He fell about 11 feet, striking a mounted toolbox before hitting the ground. He suffered a broken right leg below the knee, a compressed lower back vertebra, and a contusion to the right buttock. He was hospitalized.",1
An employee became hot and felt ill while working on a farm. The employee was hospitalized.,1
An employee was stacking column forms. The employee's right little finger was caught and broken between two of the forms.,1
"An employee was driving a front-end loader. The employee lost consciousness, and the front-end loader crashed through trees. The employee suffered a head injury.",1
"An employee was running toward a go-cart that had spun out of control. He slipped on the slick track, fell, and suffered a broken right femur. He was hospitalized.",1
An employee was checking pinholes between an index plate and a pin holder on a lathe. The index plate rotated and cut off the tip of the employee's right middle finger.,1
An employee slipped and fell while walking from her car toward a building. She suffered a broken right hip.,1
"An employee was attempting to retrieve a granite slab that was stacked behind multiple other slabs. One of the wedges the employee used to create a gap between the slabs fell and his left index finger was pinched between the slabs. The employee suffered an avulsion, which required surgical amputation of the fingertip.",0
An employee was lifting up buckets in a spray paint booth. The employee lost balance when they stood up and fell to the floor resulting in a broken femur.,1
"On October 13, 2021, an employee was operating a wire draw machine. During the drawing operation, the employee was adding lubrication powder to the die area of the machine when the glove on their right hand was caught and pulled into the rotating spindle. The pinch point where the wire wrapped around the spindle caused a partial amputation of the employee's third digit and a severe laceration to the fourth.",1
"An employee was unloading steel I-beams from a truck. A beam slipped and fell onto the employee's left foot, injuring it.",1
"An employee was operating a machine. His left thumb was smashed between a wooden block and a metal part, resulting in an amputation.",1
An employee was changing the print sleeve of a printing deck when they were struck in the face and chest by a metal end cap. The employee suffered lost teeth and potential fractures.,1
"On October 13, 2021, an employee was pushing a metal cart onto an elevator. As the cart turned, the employee's right thumb was pinched between it and the side of the elevator. The employee suffered a potential amputation to the thumb tip.",0
"An employee was pressure washing and when he pulled the trigger to the pressure washer the shoulder stock shot back into his right shoulder, resulting in a fracture that required hospitalization.",1
"An employee was using a band saw to cut solar board. The employee's finger was crushed between the saw table and a gliding outfeed table, causing a partial amputation to the fingertip.",1
"An employee was driving a water truck along a lease road when he hit a pothole and the vehicle dropped, jarring the employee's spine and resulting in fractured vertebrae.",1
"An employee climbed onto a conveyor belt and walked toward the end of the belt when he slipped and put his hands out to brace himself. His glove got caught in a tail pulley, which crushed his ring finger and resulted in an avulsion on his finger pad.",1
An employee was burned on the legs by isopropyl alcohol when it caught fire.,1
"An employee was adjusting the tension on the pulley's belt for the conveyor. His right index finger was caught between the drive and the rotating pulley's belt, resulting in broken bones and lacerations.",1
An employee was moving boxes on a trailer. He fell out the back of the trailer and suffered a broken left humerus.,1
An employee slipped and fell while exiting the cab of an excavator in a company yard. The employee landed on the ground and suffered a broken left arm.,1
An employee was moving drywall tools from one house into another. The employee slipped on peel-and-stick backing paper from window tape; he fell and his jaw struck the edge of a counter. He suffered a broken jaw and a chin laceration.,1
An employee was moving an elevated platform lift when it contacted an overhead power line. The employee was shocked.,1
"An employee was securing a guy wire. Voltage from a 19,000-volt circuit traveled down the wire and shocked the employee, whose heart stopped. The employee was resuscitated and hospitalized.",1
"An employee was holding a 4-inch pipe when it slipped and pinched his finger between the pipe and a steel bulkhead through which the pipe was being installed, resulting in a partial amputation of the left index finger.",0
"An employee was helping as a forklift turned over a load of steel rails. The load shifted and hit the employee's left leg, breaking the tibia and the fibula.",1
An employee was using a pressure washer when it lacerated the top of his right foot.,1
"A coil was being lowered onto a de-coiler. An employee was trying to remove a label and was struck by the coil, suffering a broken right foot.",1
An employee was throwing bricks out of a hole. One of the bricks bounced back off the silt fencing and fell back into the hole. It struck and lacerated the employee's head.,1
"An employee was operating a powered pallet jack. The employee's right lower leg was pinned between the pallet jack and a rack, causing fractures.",1
"An employee was delivering auto parts at a car dealership. There was an attempted robbery, and the employee was shot in the stomach.",1
"An employee was using a panel bender to bend 2-inch by 8-inch metal anchors. While the employee was trying to correct a bend, the bender activated via the foot pedal and the employee's fingers were caught between the die and a metal piece. The employee's middle and index fingertips were amputated.",0
An employee was using a cutoff saw. The saw partially amputated the employee's right thumb.,0
An employee was unjamming wood from a dust chain when he suffered cuts to the three middle fingers on his right hand. He was hospitalized.,1
"While pulling on a piece of equipment to move it, an employee suffered a slipped disc in the lower back.",1
"An employee was removing the straps from a load on a flatbed 18-wheeler. As the employee removed the last two straps, two bundles of aluminum extrusion (30 feet long, weighing 866 and 699 pounds) fell from the side of the load and struck him. He suffered severe fractures to the right leg, as well as fissures to his vertebrae.",1
An employee fell and suffered a knee injury.,1
"On October 14, 2021, an employee was moving a steel roll (about 8 inches in diameter, 155 inches long, and 2,500-3,000 pounds in weight) off a saw onto a forklift. The roll fell about 3-4 feet, landing on his foot and lacerating and fracturing it.",1
"An employee fell approximately 10 to 15 feet while attempting to transition from a pole to an aerial lift, resulting in broken ankles.",1
An employee was using a forklift to unload trailers at a dock. The forklift fell from the dock to the ground. The employee suffered a back injury.,1
"An employee was trying to calm an aggressive resident. The resident threw a sports drink bottle at the employee's abdomen, resulting in internal injuries.",1
"An employee was working from an extension ladder to paint under a window, about 10 feet high. The ladder slipped and the employee fell to the ground, suffering lower back, pelvic, and hip injuries.",1
An employee tripped over a piece of metal and fell onto the concrete floor. The employee suffered a fractured hip/pelvis.,1
"An employee was using a robotic welder when a piece of debris got jammed. While attempting to clear the debris, the tip of the employee's right little finger got pinched in a pinch point, resulting in amputation.",0
"An employee was putting a tub grinder chain onto the teeth of an excavator hook when their left index finger was pinched by the chain, resulting in amputation of the finger.",1
"An employee tripped over an 18-inch-high guardrail and fell, landing on the floor and suffering a broken left arm and dislocated left elbow.",1
"An employee was trying to pick up some strapping from the ground. He tripped and fell to the ground, suffering a broken wrist. He was hospitalized.",1
"On October 14, 2021, an employee was trying to maneuver a powered industrial truck off a dock leveler near warehouse racking. The truck was caught on the dock leveler; as the employee moved it side to side to free it, the employee's left hand was caught between the truck's handle and a warehouse racking column. The employee suffered a crushing injury to the hand, wrist, and forearm (with no fracture or dislocation) and was hospitalized for surgery.",1
"An employee opened the door to a baghouse. Hot asphalt dust spilled out of the baghouse onto him, burning his right leg.",1
"An employee was helping repair a dump box when they moved a twisted latch into position. The employee's right index fingertip was caught in a pinch point created by the latch moving flush to the dump box, resulting in an amputation of the fingertip just below the nail.",0
"At about 11:30 a.m. on October 14, 2021, an employee was guiding a forklift as it loaded 16-foot metal shoring plates (weighing 720 pounds each) onto the back of a truck. One of the plates began to slide off the forks of the forklift and struck the employee on the back of the leg, resulting in a fractured ankle.",1
"An employee was trimming branches and removing a cut limb. When the employee rotated the limb to send it to the ground, the limb made contact with the overhead 12 kV line and the employee was shocked.",1
An employee was placing material on a brake press. The brake was activated and partially amputated the employee's finger.,0
An employee was holding birds that were being vaccinated when the vaccination gun injected his left middle finger.,1
"Three employees were manually moving an I-beam. The I-beam tipped over onto one employee, striking him in the torso. He sustained internal injuries to the midsection and pelvis.",1
An employee was repairing a mixer. A belt caught his left index finger and pulled it through a pulley. The index fingertip was amputated and his middle finger was split open.,0
"An employee was conducting a visual inspection of conveyor belt equipment and saw a string hanging down in the equipment area. He reached to grab the string when the belt pulled his gloved left hand into the conveyor, resulting in injuries to the index, ring, and middle fingers that required surgery and possibly resulted in two amputations.",0
"A crew was changing out a transformer. The transformer had been disconnected from the conductor. When the hardware affixing the transformer to the pole was loosened, the pin insulator on the overhead conductor broke and the conductor contacted the transformer, which then became energized. An employee who was working on the pole suffered burns and was hospitalized.",1
An employee was manually dispensing a caustic cleaning chemical into a 5-gallon container. The chemical splashed onto the employee causing chemical burns on his right thigh.,1
"An employee was at a jobsite repairing a truck that had broken down. The employee was in the median of a service road and had a cone behind the truck being serviced. While working on the truck, the employee was stuck by the bucket of a front-end loader being driven down the service road. The employee was pinned between the side of the bucket and his truck, resulting in amputations of three fingers down to the first joint as well as a broken right femur.",1
"On October 15, 2021, an employee was standing about 8-10 feet behind the operator of a water lance, being used to clean the tubing of a fin fan bank. The lance came out of the unit and a burst of water lacerated the employee's left hand and left cheek.",1
An employee was loading a 20-foot length of 8-inch PVC pipe onto a pipe rack on a truck. The pipe struck him on the right side of the head above the ear resulting in injury. He also sustained a second injury on the left side of his head.,1
"An employee was trying to remove an aerosol can from the warm water testing tank it had fallen into. The can exploded. The employee suffered injuries to the face, an eye, and the hands, as well as lacerations.",1
"On October 15, 2021, an employee was opening a manhole. With his right hand, he had lifted the cover using a manhole pick; he was reaching to secure it with his left hand when it slipped off the pick and pinched his left index finger. The fingertip was amputated. He was hospitalized, requiring surgery.",1
"An employee exited their car and walked a few feet across a gravel parking lot when they fell to the ground, resulting in a fractured hip and abrasions to their face.",1
An employee fell down uneven concrete steps while leaving a home. She suffered a broken knee and foot and was hospitalized.,1
"An employee tripped on a kitchen mat and fell, suffering an injury to the right shoulder and arm.",1
An employee was cooling off at a receiving dock after welding. He leaned on the plastic safety chain guarding the door and fell 5 feet 10 inches to the concrete surface below. He suffered a broken right leg and was hospitalized.,1
An employee was helping to spot for a flatbed truck that was backing up beside a boom truck. The employee's right arm was pinned between the two truck beds; the elbow was crushed and fractured. The employee was hospitalized.,1
"An employee was cutting the ends off of trusses using a circular saw when the saw jumped and caught his glove, pulling his left hand into the blade and amputating the little finger.",0
"An employee who was performing paving duties walked past the front of a tri-axle dump truck when they were hit by the truck as it moved forward, resulting in a fractured pelvis.",1
"At 8:00 a.m. on October 15, 2021, an employee fell while climbing down a 10-foot ladder. The employee landed on the ground 7 feet below, suffering a head injury and a broken wrist.",1
An employee's right hand was caught by an agitator blade in a hopper; the employee suffered severe lacerations. The feeder bin's safety grate was not present at the time.,1
An employee slipped and fell while walking into a refrigerator. She landed on the refrigerator's floor and suffered a concussion.,1
"An employee lost his balance while securing a ladder to the roof of a one-story house. He fell backward, hitting the back of his head on the asphalt ground and suffering a concussion.",1
"An employee was removing a cap from a truck. The cap was under pressure and flew off, striking and breaking the employee's right leg.",1
"An employee was working on a radiator. On removing the radiator cap, the employee was sprayed with hot water and suffered burns to the hand and abdomen.",1
"Two employees were adjusting the forks on a material handler. The injured employee was trying to narrow the fork pinch point while the second employee lifted the fork, resulting in amputation of the injured employee's left little finger.",0
"An employee was descending a track ladder. He fell at the last step, landing on the concrete floor and suffering a broken right arm.",1
An employee was servicing a powered lift truck battery. The employee's left index finger was caught in racking and amputated at the first joint.,0
"On October 15, 2021, an employee was repairing a leaking steam hose and was trapped between a moving parts hoist and a drip pan in the plating department. The employee was hospitalized, having suffered a lack of oxygen.",1
An employee slipped on wet grass while walking to a residence to make a delivery. The employee suffered a broken leg.,1
"An employee was answering calls at their work station when they tripped over a chair and fell, hitting their leg on a desk drawer and their face on the floor. The employee suffered a lost tooth, cracked front teeth, and a bruised right arm, thigh, and calf.",1
"An employee was using an air powered spray gun to apply peelable paint to a unit when they dropped the spray gun. The employee tried to catch the spray gun and hit the trigger, causing it to spray through their glove and into their right thumb.",1
"An employee was selecting cases in the warehouse to fill an order. The employee was walking beside a motorized pallet jack using the arm control to move the pallet jack forward. The pallet jack turned toward the employee and ran into his ankle, resulting in a fracture.",1
"An employee was marking pipe. The employee's finger was caught between two pipes, suffering a crushing injury that necessitated a surgical amputation.",0
An employee was operating a powered industrial truck (pallet end rider - double) when his foot became wedged between his equipment and a parked tugger resulting in fractures and lacerations.,1
"At 12:30 p.m. on October 15, 2021, an employee was pulling wires through a conduit. The employee fell through a skylight, hitting a partition wall and then the ground 16 feet below. The employee suffered a head injury and brain bleed.",1
"An employee was conducting oil drilling rig derrick lifting operations. The employee was holding the bridle line while taking in slack when their right hand was caught in the crane sheave, resulting in broken bones and lacerations to their right hand.",1
"An employee was taking dimensions on a low porch roof. He fell to the floor 10 feet 9 inches below, suffering broken ribs on the right side.",1
An employee was clearing a jam on an extrusion line when moving conveyor belts amputated their right index fingertip. The equipment was not locked out/tagged out at the time.,0
"An employee fell off a performance stage and suffered a cracked rib, a broken arm, and a neck fracture.",1
"An employee attempted to sit in a chair when they fell onto the floor, resulting in a broken right hip.",1
"An employee's left hand was caught between a mill's spindle shaft and an input roller when the spindle shaft activated, resulting in a partial amputation of their index finger at the last joint, as well as crush injuries to their middle finger and thumb.",1
"An employee was putting a wheel on a balancer. The wheel fell, and the employee's left hand was caught between it and the spindle. His middle finger was partially amputated (with no bone loss).",0
"An employee tripped on a fatigue mat and fell backward to the floor, where a cart fell on top of her. She suffered broken vertebrae and was hospitalized.",1
"An employee was running meat through a powered tenderizer. The tenderizer caught the employee's glove and crushed the employee's little finger, which had to be medically amputated.",0
An employee was riding on the back of the yard dog in front of the trailer. The yard dog jackknifed into a ditch and the employee jumped. The employee suffered an injury that resulted in amputation of the lower left leg.,1
"An employee was inspecting steel castings. A pneumatic vise caught the employee's finger, causing an amputation.",0
"At 7:00 a.m. on October 16, 2021, an employee was troubleshooting a machine. The top part cylinder became detached from the machine's top part frame, leaving a gap. The machine then cycled while the employee's right hand was between the cylinder and the bracket. He suffered amputations to the index and middle fingertips.",0
An employee's arm was caught in a conveyor roller and broken. The employee was hospitalized.,1
"An employee was working from the ground, helping as a crane placed cargo loaded on flat racks onto a road chassis. As the employee moved to place a connecting pin, a flat rack shifted and crushed his right index finger. Half of the finger was amputated.",1
An employee fell down stairs while exiting a building. The employee suffered a broken ankle and was hospitalized.,1
"An employee was using a hedge trimmer, working from the third rung of a 6-foot A-frame ladder. He fell from the ladder, and the hedge trimmer's blades cut and fractured his left little finger.",1
"Maintenance was being performed on a production line. An employee grabbed a belt on a motor pulley system with his left hand. The pulley system pulled in his hand, causing partial amputations to the little finger, ring finger, and thumb.",0
An employee's shoelace was caught on a strap hook on the bottom pallet in a stack. The employee fell to the floor and suffered a broken hip.,1
"An employee was reading material labels and entering them into a computer while near a clamp truck when a filter roll slipped from the clamp truck and struck the employee's right foot, resulting in a fracture.",1
"An employee was raising a window pane to replace the window screen. While the employee was inserting the screen, the window pane slammed down on the employee's right little finger. The fingertip was amputated.",0
An employee was clearing up a jam on a line for sheets of veneer. The employee's left ring finger got stuck in a pulley. The fingertip was amputated.,0
An employee was lifting a mail bag when they suffered a strained or sprained right arm.,1
"While trying to get over a double row of concrete barriers in a highway gore area, an employee fell about 40 feet in the space between two barriers, hitting a concrete apron below. The employee suffered leg and arm fractures and internal injuries.",1
"An employee was inspecting an object at the edge of a middle-level floor. He lost his balance and fell to the ground-level floor, suffering injuries to the spleen and kidney. He was hospitalized.",1
"An employee was cleaning a roller. As he tried to cut a paper inside it, his right arm was caught in the conveyor belt and broken.",1
"An employee was attaching a C-hook to a smaller scale hook attached to an overhead crane. The C-hook was resting on top of a coil. The smaller scale hook was not fitting into the C-hook and the C-hook slid off of the coil, striking the employee's left shin and causing a laceration.",1
An employee was troubleshooting a machine when he came into contact with a moving belt. He suffered a fingertip amputation.,0
An employee had a heart attack during a 2-mile walking event and was hospitalized.,1
"An employee was blowing off a bandsaw table. The sawblade lacerated the employee's right hand. The employee was hospitalized, requiring surgery.",1
"An employee was cleaning a copy machine. While trying to open the filter compartment to finish the cleaning by rinsing with water, the pressure exerted on the lid caused a solution with possible traces of a sodium hypochlorite to spray into the employee's eyes, resulting in eye irritation that required hospitalization.",1
"An employee was washing sugar cane pulp off the floor of a mill area while wearing knee-high rubber boots. The employee stepped onto a floor grate when it shifted, causing him to step into a floor drain with his right leg. Hot water that was in the drain entered the employee's boot, resulting in burns to his ankle and foot.",1
An employee was preparing to set a blowout preventer (which was being lifted on a forklift's forks) onto a frac tree. The blowout preventor slid off the forks and pinned the employee to a grate.,1
"An employee tripped on a power cord and fell to the floor, suffering a broken left hip.",1
"An employee was walking down the ramps of a vehicle transport trailer when he fell. He landed on his feet and suffered a broken right tibia and fibula, a broken left heel, and a lower-back spinal fracture. He was hospitalized.",1
"An employee was performing preventative maintenance on a chain line when his right hand was pinched by the chain, resulting in a fracture.",1
"An employee was pushing logs into the pasteurizer bottom deck with their left hand, while their right hand was on the track on a plastic sliding door. As the employee was finishing up the task, the plastic sliding door moved, scraping the right little finger that was in the track and resulting in a fingertip amputation.",0
"An employee was working on a car that was getting new tires. An impact gun ran a lug nut onto the employee's thumb, amputating the tip.",0
An employee was in a scissor lift cutting a concrete section. The section struck the scissor lift causing it to tip over. The employee suffered a broken nose (caused by a collision with the lift) and fractures to the left elbow and right wrist (caused when the employee struck the ground).,1
An employee was dislodging a jammed board from a moulder machine when they suffered the amputation of a portion of the tuft of their middle fingertip. The machine was not guarded nor locked out/tagged out at the time of the incident.,0
"An employee stepped off a concrete pad to the concrete floor 10 inches below, tripped, and fell. The employee suffered a broken right hip.",1
"An employee was unloading a trailer. His foot was caught on a tire and he fell to the ground, suffering a broken ankle.",1
"An employee was cutting parts using a bandsaw. The employee's left wrist contacted the sawblade and was severely lacerated, causing an amputation. The blade was unguarded at the time.",1
"On October 18, 2021, an employee was bending an air conditioning line on a CNC machine and amputated their left middle finger.",1
"An employee fell while descending from a scaffold, landing on the ground about 10 feet below and suffering a head injury.",1
"An employee was unclogging a jam in a sealing machine. The machine crushed two fingers on the employee's right hand, causing injuries resulting in the amputation of both fingers.",0
"On October 18, 2021, an employee fell off a roof and was injured.",1
"An employee was walking on stairs in an apartment building when they slipped and fell down the stairs, hitting their head on the concrete floor and resulting in a concussion.",1
An employee was picking boxes for shipping. A box was leaning against the box being picked; it fell and broke the employee's arm and pelvis.,1
"An employee was rebuilding a pallet of yogurt cases when his foot slipped off the side rail of a conveyor and he fell to a lower level, resulting in injuries.",1
"Employees were changing the oil on an RV. While the RV was being lined up, an employee was caught between it and the wall. He suffered a broken pelvis and was hospitalized.",1
"When an employee turned a piece of metal during a metal cutting operation, it caught the sawblade and kicked up. This moved his index finger into the blade, which amputated part of the fingertip.",1
"An employee was about to climb a ladder down from a roof. His shoes, wet with dew from the roof, slipped on the first rung of the ladder. He fell to the ground below and suffered a fractured/dislocated elbow and a fractured knee.",1
"An employee was fixing a break in a hoist chain. His left hand got caught in the chain, and he suffered partial amputations to three fingers: the index finger (at the first knuckle) and the little and ring fingers (at the second knuckles).",0
A forklift ran over an employee's foot resulting in a crushing injury.,1
"An employee was exiting a trailer when he fell to the ground, suffering contusions to the left hip and left elbow, as well as a fracture to the left tibia that required surgery.",1
"On 10/18/2021, an employee was working on heating inner racers with a heating torch. The hose leaked oxygen and a flash fire occurred in one of the lines, resulting in second degree burns to the employee's left hand that required hospitalization.",1
"An employee was climbing down a 5-foot ladder. She fell at the last rung, suffering a contusion to the right hip where it struck the concrete floor.",1
"An employee was moving a metal rack and placing products onto it when their left hand was pinched between the rack and a post, resulting in an injury that required hospitalization.",1
"A temporary employee was cleaning extruder rollers when his left forearm was pinned and crushed. He was hospitalized, requiring surgery.",1
An employee was replacing a cylinder on a hydraulic press machine. The cylinder slipped out of his right hand and struck his left hand. The tip of his left ring finger was amputated.,0
An employee was laying down insulation on a flat roof. He fell from the roof to the ground 17 feet below and suffered a left wrist injury.,1
A forklift was pushing a driveshaft into a block of wood that was being held by the injured employee. The employee's right middle finger slipped and the fingertip was crushed resulting in amputation.,1
"Four employees were assigned to replace two damaged glass panels that were on a large atrium in front of a residential high-rise. After replacing one glass panel, the injured employee went down for a break. After the break, the employee was repairing caulk on the replaced glass panel when they stepped into the opening of the second glass panel and fell approximately 21 feet 3 inches to the ground. The employee suffered severe injuries to their legs and hips and was hospitalized. Fall protection was not worn at the time.",1
"An employee was changing a light on a flagpole from the bucket of a truck-mounted articulating boom lift. The employee fell out of the bucket, landing on the asphalt ground and suffering crushing injuries and fractures to vertebrae and the sternum.",1
"An employee tripped while exiting a security hut and fell backward. His head hit the ground and he lost consciousness, suffering a possible concussion. He was hospitalized.",1
An employee was servicing a puller pack for a product line in a pultrusion area. The puller pack's hydraulic clamping cylinder clamped down on the employee's right hand. The employee suffered a partial amputation to the index finger. The puller pack was energized at the time.,0
"On October 19, 2021, an employee was climbing a fixed ladder to access a rooftop hatch when they slipped and fell approximately 10 feet, resulting in a back injury.",1
"An employee was adjusting part placement on a machine. The press head actuated and pinched the employee's left thumb, causing a laceration and amputation to the tip.",1
"On October 19, 2021, at 2:00 p.m., an employee removed chunks of cheese from a machine when a cylinder activated and the employee's right fingers were pinched between the cylinder and a stainless steel part, resulting in an amputation to the little finger and fractures in three additional fingers.",0
"An employee was descending a ladder when their foot skipped the last rung and they fell on their right hip, which had a tape measure clipped to it. The employee sustained severe bruising to the right hip.",1
"An employee was troubleshooting a motorized gate when their glove was caught between the conductors of the gate's wheel, resulting in a partial amputation to the index finger.",0
An employee was working in a sports bar when they began to experience heat-related illness that subsequently resulted in hospitalization. The air conditioning was not working at the time.,1
"An employee was pushed to the ground by a patient, resulting in an abdominal injury.",1
"An employee tried to maneuver a pallet jack being steered by a co-worker by grabbing the forks when the forks came down onto the employee's right index finger, resulting in an amputation at the first knuckle.",0
An employee was cleaning out the dust collector for a milling machine and sustained amputations to their right middle and ring fingers. The machine was running at the time.,1
"An employee reached to pick up a tender that had fallen from a chicken frame when their right index finger contacted a knuckle chain that moves frames down the line, resulting in an amputation down to the first joint.",0
"An employee was cutting a vertical board with a portable cut-off saw when something got caught in the saw and pulled the saw away from the employee. The blade struck the employee's left shin, resulting in a laceration.",1
"An employee was conducting inventory in a stockroom when he tripped and fell. On the way down, he reached out to brace his fall on a nearby rolling ladder, which cut his left middle finger and resulted in a partial amputation. The employee was hospitalized.",1
"An employee was operating the bottling production line when the line stopped. The employee tried to clear a label jammed on the machinery when the machinery contacted the employee's right index fingertip, resulting in amputation. The machinery was not locked out/tagged out at the time of the incident.",1
"An employee climbed up a soy bean tote, slipped, and fell resulting in a laceration to the side of the head/temple.",1
"An employee was guiding a 10-inch diameter pipe section 3-4 feet long and weighing 200-300 pounds as a co-worker lowered it using a rope. The rope broke while the pipe was being lowered, hitting the employee in the back and resulting in pneumothorax of the left lung.",1
"An employee was walking on a rooftop, placing a telecommunications wire. The employee fell through a fiberglass roof lighting panel and landed about 20 feet below on a concrete floor. The employee suffered a head laceration requiring staples, a concussion, multiple rib fractures, a punctured lung, multiple abrasions, and a broken bone in the hip/pelvic area.",1
"An employee was supervising the loading of trucks onto a trailer. He fell from the trailer, suffering a closed fracture to the left wrist and a fracture to the left upper femur.",1
An employee was trimming a tree with a pole saw. The saw fell and lacerated the employee's right thigh.,1
An employee was changing a drill bit when the trigger of the electric drill was activated causing the bit to strike a finger on his left hand. The finger was broken in multiple places and required surgery.,1
"An employee was investigating a suspicious vehicle in a parking lot. The vehicle ran over the employee, resulting in a broken hip.",1
"Two employees were working from a ladder jack scaffold. The ladder feet sunk into the ground, causing the platform to move. One of the employees fell to the ground and suffered a skull fracture.",1
"An employee was working near a manlift in a melt department when they were struck by the manlift, resulting in a displaced fracture of the second metatarsal bone on the right foot, as well as a closed fracture of the right tibia and fibula.",1
An employee was loading paper into a folder unit when the internal blades amputated multiple fingertips.,0
An employee fell off a loading dock to the ground 4 feet below. He landed on his side and suffered broken ribs and shoulder trauma. He was hospitalized.,1
An employee was using a circular saw to cut plywood when the saw kicked back and landed on the employee's left hand causing a laceration.,1
"A walking tug operator was helping move an aircraft from a test facility turntable. The handle on the tug struck him in the abdomen, pushed him backward into a large external overhead door, and pinned him against it. He suffered broken ribs, a liver laceration, and a broken back vertebra.",1
"On October 20, 2021, an employee had just changed a roll former machine from one metal size to another and was setting up the machine for a new production order. He was reaching to retrieve a metal piece coming out of the machine when the chain and sprocket that drove the kicker wheel caught his right glove. His ring finger was amputated at the first knuckle, and he was hospitalized.",1
"An employee was walking when their foot was struck by a reach truck, resulting in a foot fracture.",1
"An employee was cutting a zip tie containing wires on a new trailer when the knife slipped out of his right hand, resulting in a laceration to his left hand.",1
"An employee was attempting to unjam a machine when the hold down clamp activated and crushed his right ring finger, resulting in amputation below the fingernail. The machine was not locked out or tagged out at the time.",0
"An employee was climbing steps to reach a machine hopper when she slipped and fell to the floor, landing on her elbow. The employee suffered a dislocated elbow.",1
"An employee was preparing to climb a tree. To set his climbing line, he threw a throw line and throwball in the tree. The throwball got stuck in the tree and he pulled on the throw line to dislodge it when it came toward him and struck him under his right eye. The employee suffered a fractured orbital bone that required hospitalization.",1
"An employee was filling a pipe with water and air when the pipe exploded in his face, resulting in lacerations to the face and cheeks.",1
"On October 20, 2021, an employee was rigging a steel part to a chain hoist. The part fell, causing the chain to become taught and pinch the employee's finger. The employee suffered a partial amputation to the finger.",0
"An employee was assisting in unjamming a tilt log moulder when her left glove got caught in the machine, resulting in amputation of the left little fingertip.",0
An employee was helping a crane operator lower a 72-inch concrete pipe form and place it into a pipe machine. The employee's left middle and ring fingers were caught and severely lacerated/abraded between the form and the machine.,1
"An employee was helping a co-worker move an anilox roller that was about 51 inches long and 300 pounds. The roller was being moved with a hangar and hoist  onto a cart. While moving the anilox roller, the hangar slipped and the anilox roller fell onto the employee's left hand, resulting in a crush injury to the middle finger.",1
"On October 20, 2021, an employee left the front desk when the phone rang from the office. The employee turned to re-enter the door to the front desk and struck their shin against the door. The employee suffered a fractured tibia.",1
An employee was wiping off a paper cutter blade when they suffered a fingertip amputation without bone loss.,0
"An employee was plastering sheet rock from a straight ladder. The ladder kicked out and the employee fell to the concrete floor, suffering broken ribs.",1
"An employee was demonstrating to a co-worker how to remove the chuck from a collet system on a CNC lathe. The employee had his fingers behind the chuck and when he went to remove it, the foot pedal was pressed and the collet system closed on his left hand fingers, resulting in amputation of the middle and index fingertips.",0
"An employee set up an aerial lift with two outriggers positioned on a road and the other two on an embankment. The employee raised the aerial lift approximately 45-50 feet high to prepare to trim a tree when the embankment gave way and caused one of the lift's legs to slide. The lift fell over and the employee landed on the ground outside of the basket, resulting in compression back fractures at the L1 and L4 vertebrae and damage to the L1, L3, and L4 vertebrae that required hospitalization. The employee was wearing a harness that was attached to the lift.",1
An employee was walking across a conveyor system. The employee's left foot was caught in a gap between two conveyors. The foot was broken and dislocated.,1
"An employee was helping to move a steel bin when their gloves got caught between the bin and a piece of equipment, resulting in a crushed hand.",1
An employee was rigging down oilfield equipment. The tip of the employee's left thumb was amputated between a hydraulic torque wrench and a flange.,0
An employee was in the process of removing a label from a combo. The employee moved to get out of the way of a forklift when the rear of the forklift contacted the combo and the employee's left hand was caught between the combo and the forklift. The employee suffered an open fracture to the distal left phalanx and to the thumb.,1
"An employee slipped, fell, and hit her head on a sidewalk at an assisted living complex.",1
An employee was unjamming debris in a food processor pump. Moving parts in the pump caused the amputation of the employee's right thumb tip. The machine was not locked out/tagged out at the time.,0
An employee had an allergic reaction to a vaccine administered at the workplace.,1
"An employee was operating a table saw and lacerated their thumb, resulting in surgical amputation of the thumb tip.",0
An employee was operating a reach truck in a warehouse. The employee's foot struck a bollard and was crushed.,1
"An employee was practicing an acrobatic act and jumping from one swing to another when she fell approximately 10 feet to the wood floor below, resulting in a lower lumbar fracture. Fall mats were in place at the time of the incident, but the employee fell outside of the mats.",1
"An employee was standing under the slip sheet attachment of a forklift, which was raised in the air as the employee installed a lift chain. The push-pole attachment fell on the employee and resulted in severe injuries to the shoulder, back, legs, and hip. The employee was hospitalized.",1
"An employee cut a hole on the roof to install an HVAC unit. The employee fell through the hole approximately 23 feet to the concrete floor, resulting in a fractured left leg.",1
"An employee was assembling a stem packing nut into a valve body. As the employee was tightening the nut, the valve and flow cross assembly rolled off its wooden blocks onto his right foot (about 6 inches below). His third, fourth, and fifth toes were broken.",1
"An employee was helping a boom operator set a steel beam onto posts. The beam fell and struck the employee on the right side. He suffered a dislocated femur, a broken shoulder, and a jaw fracture.",1
Two fork trucks collided at the corner of an intersection. An employee suffered a broken foot that required hospitalization.,1
"An employee was using a crowbar to align steel on a machine when the crowbar slipped and smashed the employee's left index finger between the crowbar and the drum of the machine, resulting in amputation of the fingertip.",0
"An employee was assisting in an inventory count by removing a pallet of goods from the second-to-top shelf of an inventory rack using a forklift. The employee's forklift struck the cross beam of the shelf above and the pallet became unstable. A few boxes fell off the pallet, striking the forklift's protective cage. The employee then exited the forklift to move away from the scene and another pallet fell striking the employee's lower back. The employee sustained an abrasion and hematoma to the lower back.",1
"An employee working inside a wind tower was hit in the head by a falling object, resulting in a skull fracture and broken ribs that required hospitalization.",1
A delivery driver arrived at a customer's location to unload product. The driver fell from the flatbed trailer to the ground and suffered a brain bleed.,1
An employee was operating a high-rise order picker to stack pallets and was attempting to straighten out an uneven pallet. The weight of the pallet shifted and the employee fell out of the order picker machine to the floor resulting in a broken right leg.,1
An employee was strapping steel beams onto a truck bed when they suffered a back injury and became immobilized. The employee was hospitalized.,1
An employee was setting up a mechanical room when a gate valve pinched his right ring finger. The finger was amputated.,0
An employee was operating an electric pallet jack when it struck the corner of a storage rack. The employee suffered injuries to the left foot and ankle.,1
An employee fell and her shoulder struck the wall. She was hospitalized.,1
"An employee was feeding boards into a moulder when the machine jammed. As the employee went to remove the jammed board, the moulder head contacted his left ring and little fingers, resulting in fractures. The left ring finger was subsequently amputated at the knuckle closest to the palm of his hand.",0
"An employee began moving a cart with a ceramic mold on top of it when the mold fell off the cart and smashed the employee's left hand, resulting in a broken middle finger.",1
"An employee was changing out a pin with a pry bar when the bar became stuck. As the bar freed, it swung around and hit the employee in the head, resulting in an injury.",1
"An employee was replacing the shell body of a ride vehicle. He was maneuvering in-between the vehicle and the body to hook a sling to the body prior to lifting it onto the vehicle. He had one hand on the shell body and was stepping over the corner of the vehicle chassis. As he reached for the farthest hook-up point, the shell body shifted and he fell back. His lower left leg struck the shell body positioning pin, resulting in a laceration.",1
An employee was operating a slicing machine in a butcher room. The machine lacerated his right thumb and he was hospitalized.,1
"Two employees were performing a coil change operation in the front end of a lubricator. The aluminum coil bunched up while the two employees were performing the coil change and jammed the machine as it was being fed through the rollers. The employees then had to reverse the machine to get the aluminum coil out of the machine. One employee was operating the controls while the injured employee was helping feed the aluminum coil. As the machine was put into reverse, the injured employee had his hands on the aluminum coil and his right hand was sucked into the machine, resulting in amputation of his index finger, a crush injury to the right thumb and the loss of flesh from the palm and fingers.",0
"An employee was pushing a ring stand down the hallway when the wheels of the ring stand bound, and twisted the ring stand toward the employee, catching her right foot and causing her to trip and fall. The employee landed on her left hip and suffered a hip fracture.",1
"An employee was unscrewing and separating a connection of a drill pipe when drilling mud sprayed out of the connection, causing the employee to fall backward and strike his face on a piece of equipment. The employee suffered a laceration on his lip and a facial fracture.",1
"An employee was walking up steps into a school when she tripped and fell. At the same time, someone was opening a door to the school and she hit her face on the door. The employee suffered a shoulder injury and a neck fracture that required hospitalization.",1
"An employee was working in a manufacturing area when loose pins fell out of a concrete bucket and the bucket fell onto the employee's right foot and crushed it, resulting in toe amputations.",1
"An employee was checking the tension on a drive chain when his thumb got caught in the chain and sprocket, resulting in a fingertip amputation.",1
"An employee was assisting a co-worker with repositioning PVC piping that was 13 feet long and weighed approximately 200 pounds. As the employee repositioned their end of the pipe, they slipped on the gate structure they were working on and fell resulting in a broken right tibia.",1
"On October 21, 2021, at 11:00 a.m., an employee was inspecting an air conditioner while on a ladder approximately 6 feet from the ground. The employee felt an electrical shock and fell to the concrete ground. The employee was hospitalized.",1
An employee was coming down in his basket after working on a light pole when a tree branch hit his up controller causing the bucket to jolt and throw him out of the bucket and onto the ground. The employee sustained broken ribs and a punctured lung as well as a fractured foot and leg.,1
"An employee was welding a module, lying on his back in a tight area. Welding slag fell onto his arm and caught his welding fleece on fire. He suffered second-degree burns.",1
An employee was moving a wall panel. The employee's right little finger was caught and crushed between the panel and a metal table. The finger was amputated.,0
"An employee was driving a forklift when it passed over a fiberglass grate and fell into a water capture pit below, tipping sideways. The employee's leg was pinched between the grate and the forklift, and the employee suffered three broken bones in the left foot.",1
"On October 21, 2021, an employee exited a semi-truck to begin cleaning out its trailer after dumping dirt. The semi-truck and trailer began rolling backward and struck the employee, who fell to the ground. The trailer tires rolled over the employee's right arm, causing fractures and a degloving injury. The employee was hospitalized.",1
An employee was walking into a machine shop area. He fell and hit a ball bearing press that was bolted to the floor. He suffered lacerations to the left forearm and hand and was hospitalized.,1
"An employee was using a hammer to loosen a part on an automobile's suspension system when the employee was struck in the eye by the automobile's control arm, resulting in an eye injury.",1
An employee was on top of a platform. The employee took a step back and fell off the platform and sustained a midshaft fracture of the right humerus with displacement and overriding of fracture fragments.,1
"On October 22, 2021, at 1:30 p.m., an employee was kneeling down on a roof to install shingles when a nail gun slid and shot a nail above the employee's knee. The employee was hospitalized.",1
"An employee was removing old sheet metal panels from a roof when he fell 15 feet to the ground, resulting in a skull fracture, 11 broken ribs, and skin lacerations to his arm and back of the neck.",1
"On October 22, 2021, at approximately 2:45 PM, an employee was operating a custom pneumatic press that presses an approximate 1-inch by 2-inch metal plate into the stile of a combination door. When the press was activated, their left middle finger was pinched in the press resulting in a fingertip amputation.",0
"An employee was dumping a self-dumping forklift hopper attached to a forklift. When the hopper rolled forward, it lifted the hopper skid off the forks and caused the skid to slide back, pinching the employee's left index fingertip between the skid and the fork of the lift. The employee suffered a fingertip amputation.",0
An employee fell from a scaffold. The back of the employee's head struck the ground 20 feet below. The employee was hospitalized.,1
"An employee was walking on a walk board when they fell approximately 14 feet to the concrete ground below, resulting in a head injury.",1
"Two employees were loading flooring onto an A-frame dolly. The dolly tipped over and the flooring struck an employee, who suffered injuries to the back and both legs.",1
"An employee was walking through a hospital when they slipped on a wet floor and fell, resulting in a broken leg.",1
An employee was cutting wood with a table saw. The saw partially amputated his right thumb.,1
"An employee was unloading merchandise from a trailer using an electric pallet jack. The pallet jack got caught in a pallet on the floor and the employee was ejected from the pallet jack, resulting in fractures to the tibia and humerus.",1
"An employee was assisting with lowering a concrete machine onto a truck using a crane when their left index finger got caught between the concrete machine and the truck, resulting in an amputation just below the nail.",1
"An employee was on a roof when they fell three stories to the ground, resulting in multiple fractures that required hospitalization.",1
"At 9:30 a.m. on October 22, 2021, an employee was operating a stand-up forklift at a loading dock. The face of the forklift pinned her left leg and foot against a guardrail in front of a charging station, breaking bones in the lower leg.",1
"An employee was loading parts into a mechanical power press when their right index finger contacted the die, resulting in a partial amputation.",0
"A haul truck driver had bounced in a rut causing him to hit his head on the roof of the truck cab. He sustained neck pain, couldn't walk, and was nauseated. The employee was hospitalized overnight with swelling in his neck and forehead.",1
"An employee was unloading a truck. While adjusting a pallet weighing approximately 700-800 pounds, the entire pallet fell on top of him, resulting in bleeding and a broken leg.",1
"An employee was packing a skid and using a miter saw to cut down a piece of wood that was roughly 6 inches long when the wood pulled his left thumb into the saw, resulting in a fingertip amputation.",0
"On October 22, 2021, at 10:30 a.m., an employee was trying to unjam a vacuum seal machine and suffered deep lacerations to the right index and middle fingers.",1
"An employee was trying to read a serial number off of a leveler, which was suspended by a crane. The crane hook came off the leveler, which fell and broke the employee's right hand.",1
"An employee was attempting to unjam a pallet from inside the palletizer machine on the large line. The employee was caught in the palletizer when the hoist engaged and pinned him, resulting in a laceration across the left pectoral muscle. The employee was hospitalized.",1
"An employee was trying to disconnect the air line of a vacuum machine when the machine came down on their left arm, resulting in a fracture.",1
"At 11:50 a.m., an employee and a co-worker were removing a tripod off the bed of an ATV when the bottom tripod leg released downward and the employee's right thumb was caught in-between the bottom leg and it's final locking position. The employee suffered a pinch injury to the top digit of his thumb that resulted in an amputation.",0
An employee was climbing down from a roof on a ladder. The employee fell from the ladder and suffered an injury to the left ankle.,1
"An employee was removing a mast from a boat. A line parted and the mast swung, pinching and amputating the employee's left little finger.",1
"An employee operating a tree trimming truck was trying to pull another tree trimming truck out of the mud. The employee got out of his truck to attach a winch to the stuck truck when they received an electrical shock from the truck, which was energized by powerlines they were trimming around. The employee suffered severe burns to their legs and arms.",1
"An employee was cutting cheese with a knife. The knife amputated his left ring fingertip, including the nail.",1
"An employee was performing maintenance on a piece of equipment when their right index finger contacted moving machinery, resulting in partial amputation.",1
Two employees were in a sewer line trench when it collapsed. One of them was buried completely and suffered swelling of the brain.,1
An employee was stepping down from a tensioner machine when barricade material punctured his pelvic area. He was hospitalized.,1
An employee was placing a long part into the resistance tester machine. The electrode tip came down on his right hand while he was holding the part and fractured two bones in his hand. The employee was hospitalized.,1
"An employee was racking drill pipe on the rig floor. As a stand of drill pipe was being set down on the rig floor, the employee slipped and fell. The stand of pipe was set down on his left hand resulting in a partial amputation to the middle finger.",1
A customer struck an employee several times in the head and face area. The employee suffered brain trauma and was hospitalized.,1
"An employee was placing equipment back into service after sanitizing. The employee was sprayed with hot water and sustained second degree burns on the torso, right arm, and upper leg area.",1
"An employee was in a warehouse, picking up a horizontal roll of paper (weighing 2,000-3,000 pounds) using a forklift. The roll fell from the forklift's clamp and began moving toward a wall. The employee dismounted the forklift and was struck by the roll on the front of the left leg. The leg was broken below the knee and above the ankle.",1
An employee was talking to a patient when he slammed his bedroom door. The door caught the employee's right hand. The employee was hospitalized and her middle and ring fingers were amputated.,1
An employee slipped on water and fell to a ballroom floor. He landed on his arm and his shoulder was dislocated.,1
"An employee was coming down a 6-foot portable ladder. He fell from a lower rung and hit his head on the concrete floor 1 to 2 feet below, suffering a head injury.",1
"An employee was cleaning a rotational molding machine when it cycled. As he tried to jump up to the platform, it caught his ankle and broke it.",1
"An employee was connecting a structural steel beam when the beam became stuck on surrounding iron while being lowered into position by a tower crane. The employee dislodged the iron and the beam fell, pinching the employee's left ring fingertip and amputating it at the distal joint.",0
"An employee was troubleshooting a glass washer. To test the machine, the employee placed glass at the entrance to the washer. The pinion gear caught his jacket and the machine partially amputated his left arm. The machine was not locked out/tagged out at the time.",1
"On October 23, 2021, at 11:20 a.m., an employee was taking inventory in an aisle in the shipping department when they were struck by a side loader lift truck, resulting in fractures to the collar bone, shoulder, and ribs.",1
"On October 23, 2021, at 2:40 a.m., an employee's left index finger was caught between a dye holder and a bottom wedge, resulting in amputation at the first joint.",0
An employee was working on a wood edger at a sawmill. The employee suffered a finger amputation while trying to release a jam.,1
"On October 24, 2021, at 5:00 p.m., an employee performing caddying duties began experiencing cramps due to possible heat stress. The employee was hospitalized.",1
"An employee was watching the level of catalyst filling a fill bin from a discharge hose when a flash fire occurred. The employee sustained burns to his ear, face, and lower leg.",1
Two maintenance employees were working on a locked-out fan. The breaking device came out of place and air movement in the room caused the fan to rotate slowly. One employee went to stop the fan and his left middle fingertip was pulled into a pinch point between the belt and sheave. The fingertip was partially amputated at the fingernail. The fingertip was later re-attached.,1
"On 10/24/2021, at approximately 8:05 a.m., an employee was climbing scaffolding on board a ship when he slipped and fell approximately 18 feet to the flight deck below, resulting in a fractured leg.",1
An employee suffered a broken and lacerated right thumb while cleaning wood chips from a screen room.,1
"On October 24, 2021, at approximately 8:45 a.m., a section of the belly pan of a conveyor was removed to inspect the snubber roller. The injured employee began to inspect the roller when their left hand was caught between the snubber roller and the conveyor belt while the conveyor was in operation, resulting in an abrasion, contusion, and crushing injury to their left hand and arm.",1
An employee was performing maintenance on a wrapping machine. The machine crushed the employee's hands and caused a partial amputation of the left index finger. The machine was not locked out at the time.,0
"A Rush employee was working under a garbage truck cab that had been jacked halfway up. The cab fell and pinned his arms and leg against the engine. He was pinned for some time before being found, and was hospitalized to lower toxin levels in his leg.",1
An employee was struck by a car as she walked through a parking lot. She suffered a leg injury.,1
"An employee was placing cardboard into a compactor when he fell onto a 4-foot metal cart that was directly behind him, striking the corner of the cart and resulting in injury to his abdomen.",1
"On October 25, 2021, an employee parked at a residence to deliver a package. As the employee exited the vehicle and reached into the driver's side to remove the keys, the front driver's side tire rolled back on his leg, resulting in leg fractures.",1
An employee was cleaning the interior portion of a grain bin when their foot was caught in an open sump pit where a drag was operating and their foot was fractured. The employee was hospitalized.,1
"An employee was on a 2-foot step ladder removing a pneumatic cylinder. He fell from the ladder, and on the way down his left side contacted a nearby brine pump. He suffered two broken ribs and a punctured lung on the left side of his body.",1
"A temporary employee was operating an automatic screw machine and dropped an air gun. When the employee attempted to retrieve the air gun, the machine cycled and contacted their right hand, resulting in a cut and a bone injury that required surgery.",1
Employees were swapping out a fork attachment for a bucket attachment on a loader. The locking pin got stuck. An employee used a piece of rebar to remove debris from the pin receiver; the pin dislodged quickly and his left ring and little fingers were caught between the pin and the receiver. He suffered amputations to both fingers.,1
An oil derrick hand fell off the oil derrick platform and struck the derrick during the fall resulting in a fractured back.,1
"An employee was cleaning a 150-ton machine press with compressed air. The employee's right hand was inside the point of operation when the machine was activated and crushed his right hand. The employee suffered injuries to his right hand to include fractures, lacerations, and amputation of his index and middle fingers.",1
"An employee was getting ready to serve breakfast when she tripped on a floor mat and struck the left side of her head on the wall, resulting in a spinal injury.",1
"An employee was delivering mail when their finger became caught in a steel mailbox door, resulting in a fracture and laceration that required hospitalization and surgery.",1
An employee was checking the washout cap on top of a tanker truck trailer when they fell off the top of the trailer.,1
"An employee was climbing into a sugarcane whole stock seed cutter. He slipped on its steps, fell, and reached out to catch himself. A chain on the seed cutter lacerated his index, middle, and ring fingers.",1
An employee was bitten by a dog while on a postal route resulting in an amputation.,0
"On October 25, 2021, an employee was clearing a jam in a power cutter machine when the bushing blade amputated his left index fingertip.",1
"An employee was inspecting a paper roll on a paper rewinder machine when two of their right-hand fingers got caught in the roll, resulting in surgical amputation of the fingertips.",0
"On October 25, 2021, an employee was attacked by a dog while delivering mail, causing the employee to fall and strike their head on the ground. The employee suffered a fractured skull, bleeding on the brain, bite marks on the arm and leg, and a fractured right arm.",1
"An employee climbed inside a rubber-tracked placer to clean it. While the employee was inside the hopper, it was moved forward and the auger was turned on. The auger struck the employee, both of whose feet were broken.",1
"An employee was separating a steam pipe union on an industrial tunnel washer to make repairs. As the employee unscrewed the connection, it came apart suddenly and hot steam burned employee's upper body and upper legs, resulting in hospitalization.",1
"An employee was struck in the head by falling pallets, resulting in multiple skull fractures and bleeding on the brain.",1
"An employee was cleaning a damper roller when his right hand was caught in a pinch point between rollers, resulting in a degloving that required hospitalization.",1
"An employee was performing an activity on a breaker when an arc flash occurred, resulting in burns to the right cheek, right arm, and left forearm.",1
"An employee noticed about 20 paddles inside a breading machine that were not moving. The employee tried to get them moving when the chain that drives the paddles contacted his fingers, resulting in amputations of his middle and ring fingertips.",0
"An employee was installing a drive wheel on an order picker. As he tried to align the drive wheel, it pinched his fingers, resulting in an amputation to his left middle finger.",0
"An employee was loading an oil delivery truck with oil. The employee slipped off the truck and fell to the pavement, briefly losing consciousness. The employee was hospitalized for a possible concussion.",1
"An employee was pulling jammed paper from a wrapping machine when the paper slipped and his left little finger went under the cutting jaws, resulting in a fingertip amputation.",0
"An employee was adjusting pallets in a trailer. A forklift moved forward, pinning the employee's right leg above the ankle against the pallets. The employee suffered a laceration and fracture to the ankle.",1
"An employee was helping to dig up a swivel. While they were getting ready to add the thread protector, the wire broke on the boom line and sliced the tip of the employee's right middle finger, pinching it against the bellhousing on the swivel and resulting in a fingertip amputation.",1
An employee was painting windows on a residential house. The extension ladder was placed on top of plastic material and slipped. The employee fell from the ladder and suffered lower back injuries.,1
"On October 26, 2021, an employee felled a tree and it landed on an adjacent, 1.5-inch diameter tree limb and put the limb under tension. The employee turned off his saw and was accessing the adjacent tree when the limb failed and struck him in the face. The employee suffered two fractures to the face.",1
"An employee was replacing a windshield wiper arm on an up-armored Humvee. The employee pulled on the wiper blade arm and it broke free, causing the employee to lose balance and fall 3 feet to the maintenance bay floor. He sustained a fractured right shoulder and bleeding in the head.",1
"An employee opened a roller grill cabinet door to retrieve soup cups. After they removed the soup cups, they turned and fell over the door, resulting in a fractured right hip.",1
"An employee was working under a machine. The machine was started and its rotating parts caught the employee's right thumb, amputating it. The machine was not locked out at the time.",0
"On 10/25/2021 at approximately 10:25 a.m., an employee was pushing a catalyst when they fell 41 feet through a gap in the grating, resulting in a lacerated spleen, lacerated kidney, and bruised shoulder.",1
"An employee was rigging high beams using a crane hook when the hook got hooked onto another beam, causing the beam to tip over and hit the employee on the back of his right leg, resulting in a broken ankle.",1
An employee was standing at the end of the cold cut machine retrieving cut material when the machine started and amputated her left thumb down to the nail bed.,0
"An employee was painting markings on an aircraft while standing on a pair of stands, 8-9 feet from the ground. He stepped into a gap between the stands and fell about 3 feet, his foot hitting a stand brace. He suffered a twisted left knee and a shoulder separation.",1
"An employee was loading wooden crates with supplies. The crate had a crack in one of its wooden planks. While the crate was moving on rollers, the employee's right index finger was lacerated by the cracked piece of wood, resulting in a partial amputation.",0
"An employee was cutting concrete using a chop saw. A piece of the concrete broke off and fell, striking the employee's right hand, which had to be medically amputated.",0
"An employee was searching a private home. While in the attic, the employee stepped on a rafter that gave way. He fell to the floor below and suffered broken ribs and torso injuries.",1
"An employee was inspecting an excavator when they slipped and fell off the excavator, resulting in a broken left shoulder and a broken right wrist.",1
An employee was backing out of a trailer while operating a stand-up forklift. She contacted a dock plate and suffered broken bones in her left foot.,1
"An employee was working in a test booth that tests the noise quality of automobile seats. The conveyor line stopped moving. The employee looked through the test booth doors, leaned over and placed their left hand on the chain and sprocket that drives the conveyor. The conveyor system began moving, resulting in amputations to the left index, middle and ring fingers.",1
"An employee was reaching for paper towels while cleaning up when her left foot caught on a box and she fell to floor, landing on right arm and shoulder. The employee suffered a fracture of the right humerus bone.",1
"An employee was overseeing unloading and receiving at the docks. The employee walked over to address a forklift operator when a skid steer backed out of a trailer and struck the employee, pinning him between the forklift and the skid steer and resulting in a broken right leg.",1
"An employee was constructing stairs from the second level of a residential home to the third level when the stringer broke and they fell 15 feet to the ground, resulting in broken ribs and a broken cheek bone.",1
"An employee was stepping off a flatbed trailer when they fell to the ground, resulting in a collar bone injury.",1
"An employee was working on a nip roller machine when their right foot became caught in the machine, resulting an a toe amputation.",0
"An employee was driving down an aisle on a stand-up forklift and collided with another stand-up forklift, resulting in a fractured left foot.",1
An employee was working on a forklift and removing a pulley that holds a hydraulic line. The mast of the forklift came down on his right hand resulting in partial amputation of the hand.,1
An employee was driving a forklift. They stepped off the forklift to keep from hitting a co-worker and the forklift tire ran over their left foot. The employee sustained a fractured hallux and degloving injury to the left foot.,1
"An employee was feeding a silicone milling machine when their hand was pulled into the milling rolls, resulting in an avulsion of their hand that required hospitalization.",1
"An employee was loading glass panels onto truck with a crane when a section of glass fell and pinned the employee on the ground. The employee suffered a fractured tibia and fibula in their right leg, which required hospitalization and surgery.",1
"An employee was unloading garage door sections inside a trailer. As he pulled one garage door section using a plastic banding strap, the strap broke and he fell out of the trailer to the ground approximately 6 feet to 6.5 feet below, resulting in a fractured left ankle.",1
"An employee was moving tires when they stepped off the truck and missed the bumper, falling to the ground and resulting in a broken femur.",1
"An employee was installing a main cable line at a private residence while on a 28-foot extension ladder when the ladder shifted and the employee fell to the ground, resulting in fractures to both ankles and a broken wrist.",1
"An employee was walking around the corner of a customer's house when he struck his head on a low-hanging gutter, resulting in a scalp laceration.",1
"An employee tripped and fell while walking through an aisle, landing on the floor and suffering a broken hip. The employee was hospitalized and underwent surgery.",1
"An employee was replacing springs in a counter balance unit on a shear machine when something shifted in the machine and his left hand was caught in the machine, resulting in amputation of the left ring fingertip.",0
An employee was conducting his security rounds when he fell into an excavation.,1
"An employee was guiding a boring rod on a vibratory plow trencher to install a conduit when the employee's hooding got caught on the boring rod, resulting in an amputation of the right little finger and potential fractures of the right arm.",1
"On October 26, 2021, at approximately 10:25 a.m. an employee was performing roofing work on a commercial building and was walking backward moving a propane tank with a handcart. While moving the propane tank, the employee tripped over the raised lip of an unprotected skylight and fell through it to the concrete floor 20 feet below. The employee sustained a fractured cervical vertebra and multiple skull fractures.",1
"An employee was climbing down to dismantle a scaffold when they fell 40 feet from the scaffold to the ground, resulting in a broken ankle, a dislocated shoulder, and broken ribs.",1
"An employee was operating a dozer while clearing a residential lot when he was thrown out of the dozer and ran over by the dozer, resulting in a broken wrist, broken hip, broken ribs, contusion of the liver, and collapsed lung.",1
An employee was assisting with a wall set when a metal support wheel crushed their toes and foot.,1
"An employee was using a side saw to remove rotten siding from a residential property when the saw blade bound and kicked back, hitting him in the left arm and causing lacerations.",1
"On October 26, 2021, an employee was working on a combine. While exiting the cab of the combine, the employee squatted down to see the front of the combine. The employee then felt pain in their lower back. The employee was hospitalized with a slipped disc in the lower back.",1
"An employee was putting rubber track that came off back onto a skid steer roller with the assistance of a pry bar. When the skid steer moved, the pry bar struck the employee on the face and neck.",1
"An employee was cutting plywood pieces with a circular saw. The blade jammed. When the employee freed it up, it moved forward and cut the employee's left index, middle, ring, and little fingers. The middle finger was amputated.",1
"An employee dismounted their forklift and walked around the front when they tripped and fell over the forks, resulting in a right hip contusion that required hospitalization.",1
"An employee was spotting for the driver of a skid steer when they moved behind the driver to retrieve a board and the skid steer drove over their right foot, resulting in a broken right ankle that required hospitalization.",1
"An employee was placing zip ties. The elevator he was on moved upward and his left foot got caught on one of the rungs, resulting in crush injuries to his toes.",1
"An employee was working on a handrail system between a short concrete wall and a stack of steel blooms consisting of 8-inch square sections of steel that were 30 feet long and stacked 4 feet high. The blooms shifted and pinned the employee against the wall, resulting in a broken right leg and right knee along with bruising on the left leg.",1
"On October 27, 2021, two employees were assembling a shelving unit with a co-worker. A boom attachment on the top shelf of the racking fell down as the two employees were pulling on the crossbar to lower one of the shelves in the middle of the rack. The boom fell and hit the crossbar, jamming it in an employee's left collar bone and chest. The cross bar then fell and landed on the other employee's feet, resulting in a fracture and hospitalization.",1
A marble setter was cutting stone with an angle grinder. The grinder slipped and cut the employee's thigh.,0
"An employee was using a forklift to pull down a pallet from a steel rack. A bulb fell from a light fixture and made contact with the forklift, startling the employee and resulting in the control handle getting pulled back, which caused the employee's left hand to get caught between the cabin and the steel racking. The employee's left little finger was amputated.",0
An employee was cutting copper tubing with an alligator shear. Oil from the copper tubing got onto the employee's gloves causing the employee's left hand to slip into the jaw of the shear. The employee sustained a partial amputation to the left middle fingertip.,0
"An employee was on the roof of a garden center structure. As he moved from the gutter to a scissor lift, he fell, landing on the ground about 12 feet below and suffering a head injury.",1
"Two employees were repairing a latch on a roll-up door. The door came down on one employee's head, causing fractures to the skull, an eye socket, and a cheekbone. The employee was hospitalized.",1
"An employee was attempting to remove a piece of material from an assembly machine. The machine partially cycled and the employee's right hand became caught in the RAM of the machine. When the employee tried to remove his hand, the machine cycled fully and his hand was caught between the material and the RAM, resulting in amputation at the wrist.",1
"An employee was training to climb trees. When he was approximately 27 feet up the tree, slack got into the carabiner system and the employee fell to the ground, resulting in spinal fractures.",1
"An employee was cleaning out the crumb tray of a dough divider machine when his finger became caught in a conveyor roller/belt. The employee sustained a broken finger and lacerations, which required stitches.",1
"On October 27, 2021, an employee was walking behind a trash truck to direct it while it was backing up. The employee slipped and fell and the rear passenger-side tire came into contact with the front of his upper left thigh.",1
"An employee was standing near a debris burn pile at a work site when a combustion in the burn pile occurred, resulting in second degree burns to their neck.",1
An employee was struck in the face by another employee during an altercation and suffered a fractured jaw that was broken on both sides and required surgery.,1
"A group of employees was using a crawler crane to lower a toolbox from the fourth floor down to the third floor. Once the toolbox was lowered, an employee unhooked the straps from the crane's hook and the ball shifted and pinched his right index finger between the hook and the ball. The employee's right index fingertip was amputated.",1
"An employee was making adjustments to a conveyor when their arms were pulled into the conveyor rollers, resulting in fractures to both arms that required hospitalization.",1
"An employee was clearing a jam on a laydown trimmer when his right hand contacted the trimmer, resulting in a severe cut on his ring finger. The employee was hospitalized.",1
"An employee was opening a building substation for a visual inspection when they suffered an electric shock, resulting in burns to their left hand and thigh that required hospitalization.",1
"An employee was walking from the office out to the warehouse when their right hand was caught between the wall and an electric forklift, resulting in broken bones.",1
"An employee was removing a compressor from an HVAC unit located at a cell tower site. He was using a torch to disconnect a copper line from the compressor. When the line came loose, a flash fire occurred, resulting in second degree burns to the employee's face and wrist.",1
An employee was using a projection welder to weld a nut onto a metal part when  its electrodes amputated his left index fingertip.,0
"An employee was dropping a docking plate onto a trailer and it did not drop properly. While raising the dock plate to drop it a second time, the plate fell backward and pinched the employee's right little finger, resulting in amputation at the first joint.",0
"An employee was walking away from his work station when he slipped on a piece of fat that was lying on the floor and fell and hit his head on another machine in the area, resulting in a laceration between his eyes and a fractured hip that required surgery.",1
"An employee was working on top of a hydromulching machine. While switching from the passenger-side turret to the driver-side turret, the 3-inch cam-lock end cap was released. Due to trapped pressure, the end cap struck the employee's face resulting in a laceration to the face, a broken tooth, and damage to other teeth.",1
"An employee was using an overhead crane to load a steel coil onto a semi-truck when the employee's left little finger was caught between the coil and the crane's C-hook, resulting in a partial amputation.",0
"On October 27, 2021, the injured employee was helping another employee to align two pieces of metal pipe 6 inches in diameter in order to prepare the metal for welding. The employee was using a hammer to hit the pipe to get it better aligned when the injured employee's right middle finger was hit by the hammer, resulting in a fingertip amputation without bone loss.",0
"An employee entered a mechanical room when the towel she was carrying got caught in equipment, resulting in a fractured left hand.",1
"An employee was exiting a coal conveyor when he stepped on a piece of plywood that broke, causing him to fall approximately 80 feet into a bunker. The employee suffered a broken wrist, a head laceration, and brain bleed.",1
An employee was directing a truck backward when he was pinned between the truck's bumper and a concrete batch plant. The employee sustained a fractured pelvis.,1
"An employee was attempting to fix a jammed roller on a conveyor in the carwash when their right middle, ring, and little fingers were caught in a sprocket, resulting in amputation of the ring finger.",0
"An employee was adjusting a circuit board in a machine. The operating mechanism caught his right little finger, resulting in an amputation.",0
"On October 28, 2021, an employee was adjusting a chain that was holding up a front axle. A floor jack under the axle slipped out. The axle came down on the employee's fingers and crushed them against the chain.",1
"An employee was offloading a truck and tripped while walking backward. The employee hit the back of their head on the ground, resulting in a head and neck injury that required hospitalization.",1
"At about 3:00 p.m. on October 28, 2021, an employee was on a work platform, which had been raised by a forklift 8-10 feet off the floor so he could access the control box for an overhead door that had stopped working. A door on the platform swung open and the employee fell backward to the floor, landing on the back left side of his body. He suffered six broken ribs on the left side and was hospitalized.",1
"An employee was standing on top of a wooden skid, bending over and pulling up on plastic straps wrapped around a bundle of cardboard (so that a forklift could slide its forks under the bundle. The straps snapped and the employee fell backward onto the concrete floor. He suffered a compression fracture to a lower-back vertebra.",1
"An employee was leaving a trailer with the pallet jack he had been using to load it. When he reached the place where the dock plate met the trailer, he fell forward and landed head first on the floor. He was hospitalized.",1
"An employee was standing on an A-frame ladder, trying to fit a window into a window frame. The ladder wobbled and went sideways. The employee fell to the ground, suffering a broken wrist and three broken ribs.",1
An employee was using a chainsaw to cut up a tree that had blown over during a storm. The chainsaw kicked back and severely lacerated his foot.,1
"Two employees were replacing a seal on a press machine. A maintenance employee was using a forklift to raise/lift the seal while the injured employee was standing on a ladder using a piece of angle iron as leverage to replace the seal. As the maintenance employee lifted the forks of the forklift to seat the seal in place, the injured employee's left middle finger was caught between the seal and the angle iron, resulting in a fingertip amputation.",0
An employee tripped and fell to the ground outside a building. The employee suffered injuries to both shoulders and the right arm.,1
"On October 28, 2021, an employee was operating a forklift with attached freight. The forklift drove over a lip ramp and the freight moved slightly. The employee exited the forklift and was trying to stabilize the freight when the freight fell over and caught the employee's left hand against the floor. Two of the employee's fingers were amputated.",0
"An employee was attempting to connect a hot water hose to the hot water supply line when the hose disconnected from the equipment and sprayed the employee on the back, resulting in burns that required hospitalization.",1
An employee was walking into work from his vehicle when he was hit by a semi-truck in a loading/unloading zone. He suffered broken bones.,1
An employee was operating a forklift when his left leg struck a trailer. He suffered two broken bones in the leg and was hospitalized.,1
"An employee tripped over a box while helping move a table. He fell to the floor, landing on his right side and suffering a broken right femur.",1
"On October 28, 2021, an employee was applying aerosol cleaner to a rag. The cleaner passed through her mask and aggravated her asthma, causing a bronchial reaction.",1
"An employee was operating a trim press. The press had cycled, and the employee was moving stock material, when the press cycled again and partially amputated the employee's right index finger.",0
"An employee was retrieving items from a safe when the door of the safe came off its hinges and struck the employee, resulting in a fractured and lacerated arm.",1
"An employee was working in the shop when several large pieces of metal welded together fell on his leg, resulting in a fracture. The employee was hospitalized for surgery.",1
An employee was fabricating a metal tray using a brake press and amputated their left middle fingertip.,0
An employee had been dumping a semi-trailer. The employee was pinched between the tractor tire and the swing-out grain auger. The employee sustained fractured ribs.,1
An employee was on a bridge placing plywood for diaphragm decking. A piece of plywood was blown into him and he fell from the bridge to the ground level about 25 feet below. He suffered fractures to the right leg and foot.,1
"On October 28, 2021, an employee was installing a water pump when it fell on his leg. The leg was broken.",1
"An employee was filling up a school bus with gas at a gas station. The employee tripped on the gas pump hose and fell, breaking his pelvis in two places.",1
"An employee was operating a forklift. It lurched forward, and his left hand was crushed between it and a column. His index and middle fingers were amputated.",1
"An employee was unloading 12 scaffolding frames for a client. The frames were standing upright against the back window of a pickup truck and were strapped in. The pickup was on a street with a slight incline. The employee unsecured the frames, took one section off, and moved to the tailgate area of the truck to hand the frame to the client on the ground. As the employee's back was turned, the frames started falling toward him and he tried to jump out of the back of the truck, but the frames caught his left leg. The employee suffered a compound fracture in his lower left leg and was hospitalized.",1
An employee suffered broken bones in the back and ribs while lifting items from a truck.,1
"An employee was sitting on a stool while working on a trailer and stood up to reposition the stool. At the same time, the stool's cushion fell off, exposing the cylinder of the chair. The employee lost balance and fell onto the cylinder of the chair, causing abrasions and lacerations to his abdomen.",1
"A beam struck an ironworker during a demolition. The ironworker suffered skull, neck, and wrist fractures, as well as lacerations to the head and leg.",1
"An employee was unpacking testing equipment. While releasing the bungee hooks, the first cord slipped out of their hand and a metal s-hook hit their left eye.",1
"An employee tripped on a plexiglass display and fell over it, landing on the floor and suffering seven broken left-side ribs as well as a contusion to the left hand.",1
"A pig was being run through a pipeline. Residual pressure forced the pig out of the barrel and it struck a door that had just been opened, which in turn struck an employee on the left arm. The employee suffered a compound fracture just below the elbow and was hospitalized, undergoing surgery.",1
An employee was removing an electrical breaker from an existing electrical panel when an arc flash occurred and burned the employee's right arm.,1
"On October 29, 2021, an employee was walking through a warehouse when he slipped on polymer that was on the cement floor. The employee fell on his side and suffered a fractured left hip.",1
"An employee was moving packed ware from the end of a conveyor to a pallet using a hoist. As the employee raised the hoist, her left index finger became pinched on the lifting device, resulting in a fingertip amputation.",0
"A falling chunk of scrap metal struck an employee on the foot, breaking bones.",1
"An employee was using a walkie rider pallet jack to unload pallets of milk crates from a trailer. The pallet jack went out of control and struck his left ankle, breaking it.",1
An employee was picking up a plastic trash bag. A sharp object protruded through the bottom of the bag and cut the employee's finger and palm.,1
"An employee lost his footing and sank into a puddle of water next to a steam condensate line. While he was trying to regain his balance, the end of the return steam condensate line got caught inside his knee-high boot. He suffered first- and second-degree steam burns from below the knee to the toes. The employee was hospitalized.",1
"An employee was opening the doors to a compressor room. One of the doors stuck, and the employee fell out the opening while trying to move it. The employee's head struck the ground about 42 inches below, causing the employee to suffer a concussion.",1
"An employee was pulling a hose when they slipped, fell back, and struck an electrical box, resulting in a lower back injury.",1
An employee was trying to clear a plug of cotton from the saw cleaner system of a cotton stripper and sustained amputations to the left ring and little fingers.,1
An employee was using a screen printing press to print designs on T-shirts when he was struck by a moving part of the machine. The employee was hospitalized for stomach and back injuries.,1
"An employee was cleaning windows while standing on a ladder when they fell off the ladder to the ground, resulting in a sprained wrist.",1
"An employee was servicing a tractor. He had accessed a tire via a 2-step step ladder. He was stepping down from the tractor's tire and onto the step ladder, but missed the top step of the ladder and fell 3 feet, landing on the ladder and then the ground. The employee was hospitalized with a fractured left rib and lacerated spleen.",1
An employee was struck in the chest by an auger machine as it was being lifted. The employee was knocked to the ground and he sustained a head injury and a fractured rib.,1
"An employee slipped and fell while repairing a tile roof, landing on the ground 8-9 feet below and suffering a broken wrist.",1
"An employee was adjusting the position of a preheater basket, which was on a hoist chain. The employee was guiding the basket when the chain was engaged to raise the load. The employee's right little finger was pulled between the chain and the load block, and the fingertip was amputated (without bone loss).",0
"An employee operating a garbage truck was performing backyard service at a client's home. The employee slipped on wet grass and fell to the ground, resulting in broken bones in his forearm and ankle.",1
"An employee was delivering a couch to a customer's house. The employee was lifting the couch over a living room banister when the couch began to fall. As the employee reached over the banister to catch the couch his left hand was caught on the couch, resulting in a wrist fracture.",1
An employee was helping operate a vinyl-melting machine. The machine's press crushed and burned the tip of his left index finger.,1
An employee was facing a plastic cylinder when their right index finger touched the facer resulting in a fingertip amputation.,0
An employee was digging a trench using a mini excavator. The edge of the trench caved in and he slipped and fell about 6 feet. He suffered a broken pelvis and was hospitalized for surgery.,1
"An employee was walking through a door. The door closed on the employee's left index finger, causing an amputation to the fingertip.",0
"An employee was using a shredder. The vacuum on the shredder sucked the employee's finger into the blades, which amputated the tip of the employee's right middle finger.",0
"An employee was repairing the belt and pulley system of a conveyor. His gloved right hand was caught in the belt and pulley when the machine started, resulting in a partial amputation of the right thumb.",1
An employee slipped and fell while descending a customer's basement stairs on a service call. The employee sustained a fractured elbow.,1
An employee was troubleshooting a machine. A pulley on the machine amputated the employee's right ring finger and part of the employee's right little fingertip.,1
"Three employees were installing louvers using a crane (one employee in the crane, two on the ground). The crane raised a louver and an employee's right index and middle fingers were pinched between the top of the louver and the bottom of a catwalk. Both fingertips were amputated.",0
A machine operator was feeding wire into a plate bending machine when their right hand made contact with in-running rollers resulting in crushing injuries that led to surgical amputation of the second and third digit fingertips.,1
"Two employees were removing a manure belt from a dryer. When the injured employee grabbed the cable slack, his right index finger was pulled into the reel and amputated at the first knuckle.",0
"An employee was walking down the stairs when they fell, resulting in a fractured wrist and two fractured neck bones.",1
"An employee was climbing on the back of a spray truck. The employee's legs became entangled in a hose, causing the employee to fall from the bed of the truck to the ground about 4 feet below. The employee suffered two broken ribs, a concussion, and bruises to the right shoulder and left foot.",1
"An employee was using a shovel to clean out barricades inside a work zone on a roadway when a vehicle entered the work zone and struck the employee, resulting in three fractured ribs and swelling in the leg.",1
"An employee was cleaning a 50-inch mill with a rag. The rag got caught in a pinch point, and the employee's fingers were pulled into the mill. The employee's index, middle, and ring fingers were amputated.",0
"An employee was running PVC production lines when a machine malfunctioned. As he tried to free a pipe that was jammed in a belling station, the machine started to process and its hydraulic cylinder came down on his right little finger. The finger was amputated.",0
"An employee was walking when they were struck by a loader transporting round bales of cotton to be processed, resulting in a head injury.",1
"An employee was working in a deli department when they tripped and fell, resulting in a broken hip.",1
"An employee was riding a double pallet jack. The employee jumped off the jack, and their leg was caught between the jack and a pallet. The leg was lacerated and broken.",1
"On October 31, 2021 an employee suffered smoke inhalation after a fire occurred in a dumper located in a fryer room. He was hospitalized.",1
"The injured employee was helping to unload metal tubes from a trailer. A co-worker was operating an overhead crane to lift a bundle of tubes. The load started to go sideways instead of in a straight line. As a result, the injured employee took a step backward and fell to the ground, sustaining two fractured ribs, a fractured right cheekbone, and a concussion.",1
An employee slipped and slid down an embankment. He suffered a broken arm and was hospitalized.,1
"An employee was working on the fabric rolling machine located at the slitter station. He attempted to remove a wrinkle in the fabric roll he was making and his arm was pulled into the machine between the fabric roll being made and the press roller, resulting in friction burns.",1
"An employee was fixing a machine when it started and cut off his right ear. He was hospitalized, requiring surgery.",1
An employee was cleaning a drain when a thermal reaction between sodium hydroxide and hot water occurred. The employee sustained thermal and chemical burns to the head and was hospitalized.,1
"An employee had just cleared a clog in a drag and re-energized the motor. The employee asked another employee at the control panel to turn on the drag. When that happened, the motor malfunctioned causing the chain and pulley system to shift, striking the employee and throwing them over the guard rail to the ground below. The employee sustained a broken ankle and shoulder injury.",1
"An employee was attempting to move a trencher. He stepped onto the trencher and his right foot slipped and fell onto the auger, resulting in a broken right ankle.",1
"An employee was walking across a 10-foot-high awning and fell through the awning, suffering a broken foot bone.",1
An employee was removing pipe from a drilled water well when a spark caused an explosion and the rear of the drilling rig caught on fire. The employee sustained burns to the face and neck.,1
"An employee was signaling to a forklift operator on a flat car unloading steel beams. The load shifted on the car and the employee fell off the car, resulting in neck vertebrae fractures.",1
"On November 1, 2021, an employee was feeding a wood bundle into a wrapping machine when a piece of wood dropped. Her left middle finger was caught between it and the incoming wood bundle. The finger was partially amputated.",1
"An employee was on the back of a lowboy trailer, guiding a 500-pound stone slab as it was offloaded from the trailer using a forklift with a boom and a stone lifter/slab clamp. The stone slipped out of the lifter and pushed the employee off the trailer, then fell on the employee's right leg just above the ankle. The employee suffered a broken leg and was hospitalized.",1
"A shop employee was directing a customer in a vehicle. The vehicle quickly accelerated into the shop and struck the employee, who was pinned between two vehicles and suffered a broken femur. The employee was hospitalized, requiring multiple surgeries.",1
"An employee was using a fish skinning machine. The machine caught the employee's left hand, causing ligament damage and partial degloving.",1
"An employee was walking into work when she tripped over a water hose and fell to the concrete, resulting in a broken hip and a broken rib.",1
"On 11/1/2021, an employee was cleaning a car when he blew compressed air across his hand and received an air embolism, resulting in hospitalization.",1
An employee was operating a blow molding machine and amputated their right index fingertip while removing a piece of plastic.,1
"An employee was taking blank temperatures on a forming machine. As the employee inserted blank temperature probes into the blanks, their right index finger was pinched between the blank arm and the operating shaft. The finger was degloved to the first knuckle, and was later medically amputated.",1
An employee was cutting ties on a bundle of PVC pipes when the knife moved back and lacerated his wrist.,1
"An employee was attempting to unhook a cable on a roll-off truck when their right fingers became caught in the cable, resulting in amputations to the index and middle fingers.",0
An employee was using a plasma torch to cut the lid off an empty drum of brake cleaner when sparks from the torch ignited fumes in the barrel. The employee suffered second degree burns on the left side of his face.,1
An employee tripped over a box that had fallen onto the floor and fell. They were hospitalized for an injury to their right hip.,1
"An employee was standing by a parked truck. A forklift swerved to miss the truck as it backed up and struck the employee, pinning him against the truck. His right knee was crushed and he was hospitalized.",1
"On November 1, 2021, an employee was driving a car toward a ship for loading when he lost control of the vehicle and struck a container on the ground. The employee suffered a contusion and swelling to his head after the vehicle's air bag deployed and was admitted to the hospital.",1
"A box truck was being backed into a customer's driveway. The truck's ladder became entangled with overhead powerlines. An employee climbed on top of the vehicle and tried to untangle the lines using PVC pipe. His head contacted the energized line and he was thrown off the vehicle to the ground. He lost consciousness, having suffered a shock and electrical burns.",1
"An employee was setting up for work on the upper level of a two-story roof when he slipped on moisture that was on the new underlayment. He slid down the roof (6:12 pitch) and fell off the second-story eave, landing on the first-story roof deck, creating a hole in the wood sheathing; he continued falling and landed on the ground below. The employee sustained fractures to his wrist and lower back.",1
"An employee was applying aluminum caps to the corners of cardboard material using a riveting machine. The employee went to grab a cap that had popped off a corner when the foot pedal was activated and the employee's left index finger was crushed by the riveting machine, resulting in a fingertip amputation. A guard was in place at the time.",0
"An employee was changing his work position while installing roof panels when he slipped and fell 20 feet to the ground, resulting in a fractured left wrist.",1
"Stacks of sheet steel weighing up to 2600 pounds were received from a supplier incorrectly oriented on wood slats. Employees were orienting the steel sheets to align correctly with the tubing line machine. Employee 1 was on the ground placing 2x4 lumber under the stacks of steel. Employee 2 was operating a forklift. Employee 2 placed the forks under the stacks of steel and lifted for clearance. Employee 1 placed the 2x4 under the stacks of steel in the correct orientation. Once the steel was lowered onto the 2x4, Employee 1 instructed Employee 2 to reverse the forklift to clear the forks. As Employee 2 reversed the forklift, the steel on top of the 2x4 shifted. Employee 1's index finger was caught between the 2x4 and the floor, resulting in amputation up to the fingernail.",1
"An employee was picking up tree limbs from the side of a road. A skid steer went out of control and pinned the employee against a chipper table. The employee suffered severe swelling, bruising, a broken kneecap, and a back injury.",1
"Two employees were doing masonry work from a tubular welded-frame scaffold about 20 feet above the ground. Work stopped so they could install additional planking above. As an employee was moving a scaffold plank upward, the planks fell down onto him, causing him in turn to fall to the ground below. He suffered head lacerations and fractures to the head and collarbone.",1
An employee was using a blender to blend macaroni and cheese and amputated his thumb.,0
"On November 1, 2021, an employee was attempting clear a jam in a riveter when his right middle finger became caught in the machine. The employee's right middle fingertip was amputated and his right ring finger was crushed.",0
"An employee was pouring concrete when his foot slipped and became caught between the form and the board, resulting in a broken fibula and tibia.",1
"An employee was pulling wire from an attic when he slipped and fell through the drywall ceiling to the floor, about 7 or 8 feet below. The employee sustained fractures to his elbow and ribs, as well as possible lung damage.",1
An employee was using a carpentry jointer to trim a piece of wood. The jointer partially amputated the employee's left ring finger.,0
"An employee was offloading casted parts from a grinding line. The employee went to flip one part over when the next part made contact with his right ring finger, resulting in an amputation of the distal end of the finger.",0
"An employee was working on a divider that makes balls of dough from a larger batch in an elevated hopper. The employee was removing dough that was leaking from the elevated hopper, when their hand was caught in the machine, resulting in an amputation to the tip of their right thumb.",0
"An employee cleared a jam in the heat set on a machine. The employee removed the lock out device and energized the machine. The employee then removed the guard to adjust a belt. The belt started moving and when the employee reached for a tool his right hand was caught in the heat set roller, resulting in a partial amputation of the right index finger.",1
An employee was using a circular saw to cut a 2-by-4. The saw cut the employee's left hand.,1
An employee was explaining issues with feeding plywood into a live edge bander machine to a co-worker when the machine turned on and pulled the employee's glove into the machine. Her fingers contacted the routing blades and the employee sustained amputation of a finger.,0
"An employee was on his hands and knees to line up a jack plate and arbor plate and screw a bolt through the plates. The employee had his right thumb positioned on top of the jack plate when the arbor plate slipped down approximately 2 inches and pinched the tip of the employee's right thumb, resulting in a fingertip amputation.",0
"An employee was feeding pipe into a bending machine when his right hand was pulled into the machine. The employee's index, middle, and ring fingers were crushed and amputated.",1
"An employee was attempting to transfer steel material from a re-coiler to a coil cart when the material began to recoil. The employee placed one hand on the material and the other hand on the console in order to prevent the material from uncoiling when their left hand got caught between the steel material and a push plate, resulting in a laceration to their hand.",1
"An employee was using an air chain hoist to remove the basket from a plating line dryer. The employee's left fourth finger got caught in the air chain hoist's chain, resulting in a fingertip amputation and the loss of the fingernail.",0
"An employee slipped on a floor that had just been cleaned and fell, resulting in a fractured left hip.",1
"On November 2, 2021, an employee was opening a bag using a small knife when the knife contacted their left little finger, resulting in an amputation of the soft tissue of the fingertip.",0
"An employee was accessing an HVAC unit in an attic. The employee fell through the attic floor to a lower-level floor, suffering three broken ribs and a punctured lung. The employee was hospitalized.",1
"An employee was working on a glass manufacturing machine. A sensor broke off the machine. As she tried to fix it, the machine backed up onto her right hand and broke one of her knuckle bones. The machine was not locked out at the time.",1
"Employees were unloading material from a barge to a storage tank. A logistics employee was lowering the unloading arm at the barge dock. The employee provided the barge operator the rope used to guide the unloading arm from the dock down to the barge. The logistics employee pulled both pins that secure the counter weight when not in use. The logistics employee then grabbed the back of the counter weight handle and pulled the counter weight toward themself. As the logistics employee was guiding the counter weight past the unloading valve handle, the counter weight pushed back too far and struck the unloading valve handle. The operator's pinky finger was caught between the unloading valve and counterweight, resulting in a partial amputation.",1
"An employee was walking toward an entrance door. He tripped on the edge of the walkway and fell, suffering a broken left kneecap and right wrist.",1
"On November 2, 2021, an employee was operating a front-riding pallet jack. While making a U-turn, the pallet jack collided with the right tine of a forklift. The employee suffered a broken femur and was hospitalized.",1
An employee was struck by a forklift while speaking with another employee. The employee was hospitalized for a left leg fracture.,1
"An employee was starting up a forklift. When it powered up, it ran over his left foot.",1
The injured employee was assisting another employee who was using a hand-held hammer drill. The drill bit caught the injured employee's glove and twisted his index finger causing a fingertip amputation.,0
"An employee was operating an overmold machine. The machine's table moved while the employee's right index finger was in a hole for the mold, causing the amputation of the fingertip at the first joint.",0
"An employee was moving a patient to the shower room when she slipped and fell to the floor, resulting in a broken left hip.",1
"An employee was watching as other employees loaded insulation into a rack truck using a crane. The load slipped and the employee was struck by a bundle of insulation, resulting in a fractured ankle.",1
"An employee was transporting gift shop materials on a metal cart. The cart veered off a walkway, then fell on the employee's foot and broke it.",1
"An employee was cleaning a sheet casting machine when he slipped and fell into the machine. As the employee was thrown out of the machine, he hit his knee on the machine frame, causing a puncture wound.",1
An employee's left foot was struck by the guide wheel on the side of an order picker resulting in a laceration and fracture of the big toe. The employee was hospitalized for surgery.,1
"A brake caliper fell from a rotor during installation, crushing the tip of an employee's right little finger. The fingertip was amputated.",0
An employee was setting down a metal chock to immobilize a vehicle when the vehicle rolled back and crushed their finger. The employee's right middle finger was amputated.,1
"At about 7:00 a.m. on November 3, 2021, an employee was putting a latex boot onto a chute used to carry concrete from a hopper to a mold. The employee's right hand entered the end of the chute and contacted the auger, which partially amputated all four fingers.",1
"An employee was walking through a corridor when his legs gave out, causing him to fall to the floor. The employee's left leg was broken.",1
"While removing screws from a shed door, an employee lost their footing and fell backward sustaining a broken femur.",1
"An excavator had been used to lift a concrete cone to an upper level. When the cone was in place, an employee climbed up it to release the chains securing it to the excavator's coupler. The coupler's jaws closed on his foot, amputating five toes.",0
"An employee was hitching a trailer to a generator. As the generator hitch was set on the edge of the truck hitch, it slipped and caught the employee's fingertip. The fingertip and fingernail were amputated (without bone loss).",1
"The boom on a lift truck contacted an overhead power line. An employee was next to the truck, touching it, and was shocked and burned. The employee was hospitalized.",1
"An A&B Business Solutions employee was standing on the forks of a forklift about 12 feet in the air. He stepped off the forks onto a wood pallet, then slipped and fell to the floor. He suffered two broken ribs and a crushed disk in the lower back and was hospitalized, requiring surgery.",1
"An employee was handling the locking mechanism on a tractor trailer coupling safety pin. The rear locking device popped free and struck the employee's left hand, which was pinned against the upper supporting member. The employee's ring and little fingertips were crushed; the employee was hospitalized, and the fingertips were medically amputated.",1
"An employee stepped into a water-filled plumbing pit while looking at an overhead HVAC duct. The employee was hospitalized, suffering from back pain.",1
An employee was separating dough on a retractable conveyor belt when his arm got caught in the belt. He sustained lacerated tendons in the arm that required surgery.,1
"An employee was adjusting a drive shaft on a blower when the shaft tilted and pinched two fingers on his left hand, resulting in amputations.",0
"An employee was performing maintenance on an ammonia wagon when a valve opened, spraying the employee in the face and causing them to inhale ammonia. The employee suffered inhalation chemical burns.",1
"An employee was standing near a sander, de-burring metal parts and placing them on a storage rack. A metal part was ejected from the sander and struck the employee's left hand, causing a fracture and laceration to their little finger. The machine was unguarded at the time.",1
"An employee was attempting to climb down from a ladder attached to a trailer. He slipped and fell approximately 3 feet to the tarping basket below, causing internal bleeding in his kidney.",1
An employee tripped and fell while walking toward a warehouse. He suffered a twisted right ankle and a broken hip.,1
"An employee fell while walking up steps as she was walking into work, resulting in a hip injury.",1
"An employee was on the second floor of a building, removing temporary doors and replacing them with permanent ones. The employee fell down an elevator shaft, landing about 15 feet below and suffering a broken jaw.",1
"An employee was cleaning a piece of equipment with a vacuum hose when her index finger was caught between the vacuum hose and the piece of equipment, resulting in a fingertip amputation.",0
An employee had put a strap in a mini excavator bucket. It fell out and he went to put it back in. The employee's right hand was clamped in the bucket and fractured.,1
"An employee was operating a scissor lift from about 20 feet in the air. A boom lift struck the scissor lift, which tipped over. The employee fell with the scissor lift, landing on the concrete floor and suffering a broken pelvis, broken lower vertebrae, a broken left elbow, and a brain bleed. The employee was hospitalized.",1
An employee was adjusting the hook and scale on an overhead crane when their thumb was crushed.,1
"An employee was hospitalized when he suffered electrical shock while servicing a school's HVAC system, causing burns to his hands and chest pains.",1
"An employee was walking to retrieve a mop when he slipped and fell, resulting in a fractured left leg.",1
"An employee was driving a golf cart with an attached utility trailer carrying a lawn mower. The cart path was wet, and when the employee braked, the cart slid and turned on its side. The employee's lower leg was fractured.",1
"An employee on a step ladder inside a barn, hanging plastic over the windows. The employee fell from the ladder, landing on dirt about 6 feet below and suffering a broken right arm.",1
"An employee was moving an empty dolly in the packet room. As she backed up, her left heel struck an empty pallet and she fell onto it. She suffered a broken left hip.",1
"An employee was helping to separate cows for the hospital when a cow pushed him against a tube, resulting in an abdominal injury.",1
"An employee fell while moving a pallet, landing on the ground and suffering a broken hip. The employee was hospitalized and underwent surgery.",1
"An employee and co-workers were doing core aerations when one of the machines got stuck in a slightly sloped area of the property. The employee attempted to put a strap on his machine to pull the other machine out. As he searched for a place to hook the strap to, he put his hand under a plate on the machine when his middle and ring fingers contacted a pulley underneath, resulting in 1/8 inch fingertip amputations.",0
"A crew was using a magnetic lift to lower a 500-pound section of square tubing into place. The injured employee had their hand partially inside one end of the tubing when the magnet failed and dropped the square tubing, injuring their left hand including crushed fingers and amputations to the ring finger and thumb.",0
"An employee was removing a clog of cookie crumbs from a mixing machine when his glove caught onto the rotating paddles, resulting in amputation of his right middle and ring fingertips. The machine was not locked out/tagged out at the time.",0
An employee was disconnecting an air hose when it whipped around and struck the employee in the lower leg. The leg was broken.,1
"An employee was operating a machine that dumps bales of plastic into a shredder. The platform was in the dump position when the employee noticed there was plastic about to discharge and was concerned it wouldn't enter into the shredder. He climbed up the side of the bale dumper to manually push the plastic towards the hopper and placed his left hand on the upright box tubing frame, which houses the guide wheels. There are two access holes approximately two inches in diameter, which maintenance uses to access the guide wheel bolt. The employee was wearing gloves and did not realize that his fingers were in the access hole. When the platform moved into the loading position, the employee's fingers were caught between the guide wheel bolt and the edge of the box tubing. The employee's left ring finger was partially amputated and the left middle finger was lacerated with ligament damage.",0
A 3-inch rigid steel pipe was being set under a raised concrete slab. The pipe struck an employee in the upper torso and head. The employee suffered facial fractures and a skull fracture and was hospitalized.,1
"An employee was replacing parts of a pipeline system. The employee pulled a pipeline marker pole from the ground, which made a deep void in the soil. When he reached into the hole to grab the leads, a copperhead snake bit the inside of his right elbow.",1
"An employee was building foam tubs and stacking them on a pallet. As she was stacking a tub on the pallet, her left foot caught the pallet and she fell to the floor. She suffered a broken left femur and was hospitalized.",1
"An employee was rigging a pallet of four CRV linkages. A linkage slid off the pallet and pinched the employee's right middle and ring fingers, causing a partial amputation of one finger through the bone.",0
"An employee was using a pressure washer to clean a garbage can. The can started to fall over; when he moved to catch it, the pressure spray lacerated the top of his hand.",1
An employee was loading a tube into a bending machine. The machine activated and crushed his left index finger.,1
An employee was operating a blow mold machine. He was removing excess plastic that was stuck on the molds under the machine when the molds closed and crushed his right index and middle fingers. The middle finger was amputated and the index finger was partially amputated.,0
An employee was moving crane mats when he slipped and fell. He suffered fractures to three vertebrae in his back.,1
"An employee was helping a maintenance mechanic adjust the drive clutch and belt on an envelope inserter machine. The side guard panel of the machine had been removed and the machine was powered. The machine was started, and the employee's right arm and hand were pulled into the power transmission belt. Two fingers on the hand were amputated.",0
An employee was aligning a brace on the landing gear of an airplane to bolt into place. The brace was moved and his right middle finger was caught in the bolt hole. The fingertip was medically amputated.,0
An employee was using a razor knife to strip wires. The knife slipped and amputated a  piece of his left index fingertip.,0
"At 8:10 p.m. on November 4, 2021, an employee was assaulted with a tree branch in a parking lot. The robber also stole the employee's vehicle. The employee suffered head trauma and was hospitalized, requiring surgery.",1
"An employee was wrapping product as it moved down a conveyor. Her left hand contacted the conveyor; a sensor detected it and caused the conveyor to move. Her hand was caught between the conveyor and the roller, causing multiple fractures to the hand and wrist.",1
"An employee had been mixing cathode powder in a mixer. With the mixing completed, he tilted the mixer to empty the powder into a bucket through the designated port. The mixer was powered on to push the powder out through the port. There was powder adhered to the port, and he tried to get it out using his left hand. The mixer blade contacted his fingers, resulting in deglovings and fractures to the middle and index fingers. The middle finger was medically amputated.",0
"Two employees were moving a trailer mounted compressor by hand after disconnecting it from a truck. The two employees were pulling the trailer forward, moving closer to the back end of the original tow vehicle. As the momentum behind the trailer increased, employee 1 attempted to control the trailer by placing his hand on the trailer tongue. Employee 1's finger became caught between the towing truck's bumper and the edge of the trailer tongue. The employee' s little finger was amputated.",0
"An employee was checking the airflow of a machine. His finger contacted a spinning fan blade, which amputated the fingertip.",0
"An employee was walking through the pantry area when they slipped on water, resulting in a knee injury that required surgery.",1
"At about 10:10 a.m. on November 4, 2021, an employee was positioning a jackhammer to load into a skid steer bucket. He was bent over at the waist, sliding the jackhammer to get it closer to the bucket, when the sole of his work boot was caught between the jackhammer and the lip of the bucket. He fell forward and his left hip struck the concrete floor, resulting in a fractured hip.",1
"An employee was working on a 10-foot ladder to help install an air compressor pipe. The employee leaned down to pass a tool to another employee when the ladder slipped and the employee fell to the concrete floor below, resulting in a vertebrae injury.",1
"On November 4, 2021, at approximately 10:30 AM, an employee connected a chain to a flat railroad car and transfer puller that pulls kiln cars out of a dryer. As the transfer car was pulling the drying car, the chain came loose and the employee reached to grab the moving chain. The chain snagged and became tight, and the employee's thumb was caught between the chain links. The employee was hospitalized for a deep laceration to his thumb that required surgery.",1
"An employee operating an auto separator pulled a broken piece of rubber out of the machine.  When the employee freed up the piece of rubber, the machine's plucker activated and caught their finger, resulting in an amputation.",0
"A trailer door closed on an employee's left middle fingertip, amputating it.",0
"On November 4, 2021, an employee attempted to unbolt a lamp post that was attached to a pulley system and tethered to a forklift. While the load was suspended, the employee reached under the lamp post to remove a nut and bolt. The load shifted and the lamp post landed on the employee's hand crushing their fingers and resulting in a partial finger amputation.",0
"While making tea, an employee dropped an empty tea urn on their left foot, injuring the left big toe. Surgery was required.",1
An employee was using a rag to clean a liner while rotating the liner turret counter-clockwise with his left hand. The employee's right little finger was caught between the stationary dog leg channel and the rotating star wheel. The fingertip was amputated above the first knuckle.,0
"An employee was training another employee on aircraft loading when their right thumb was pinched between two loaders, resulting in amputation.",1
"An employee was setting up a coil-winding machine when one of the machine's mandrels fell and the employee's right index finger got caught between two mandrels, resulting in a fingertip amputation.",0
"An employee was operating a drill press when their glove caught in the drill bit, resulting in an injury to their finger.",1
An employee was walking down stairs. She fell at the last two steps and suffered a broken femur.,1
"An employee was driving a lift onto a truck. The truck moved forward and made the lift jump. The employee jumped off the lift and suffered a broken rib, a back fracture, and a collapsed lung.",1
"An employee was using a 36-inch-long tool to clear battery plates out. The tool contacted a conveyor, which pulled the employee's right hand too close to the opening to an oven. The tip of his index finger was amputated.",0
"On November 5, 2021, an employee was using an aluminum step stool to remove the frame of a flat-screen TV mounted on a wall. The stool shifted and the employee fell to the floor and landed on his left side, injuring his wrist, ribs, pelvis, and hips.",1
"An employee was walking out of a supply room when she slipped on a wet floor and fell, resulting in a broken ankle.",1
"An employee was circulating during a surgical case. The employee was using a wand machine and got their right foot tangled in a wire, causing them to fall to the floor. The employee sustained right hip and right foot fractures.",1
"An employee was struck by a truck inside of a road construction work zone, causing a broken ankle and brain bleed.",1
"An employee was performing sanitation tasks on a conveyor. Moving parts in the machine caught his arm, breaking it. He was hospitalized.",1
"An employee was using a hydroseeding machine, attached to a bulldozer, to plant grass on a slope at a landfill. The hitch connecting the hydroseeding machine to the bulldozer broke, and the hydroseeding machine rolled down the slope with the employee on it. The employee suffered broken and bruised ribs, a broken shoulder, and a cut on the ear.",1
"A driver was lowering a commercial dumpster after emptying it when their left thumb was crushed by the lid, resulting in an amputation.",1
"An employee was on an elevated stand in front of a suspended production line that moved chickens in front of her. The chickens were connected to the moving line by locking plastic shackles, and two of the shackles got caught together while they were moving on the line. When the employee moved to undo the shackles, she fell approximately 31 inches off the stand to the floor below, resulting in a fractured right leg.",1
"An employee was exiting a pickup truck. The CB wire caught the employee's foot and the employee fell to the ground, suffering a broken right hip.",1
"An employee pulled the fifth wheel release to drop his trailer and fell back onto the asphalt, resulting in a broken right hip.",1
A security officer was responding to a request for backup when they were punched by a patient. The security officer sustained a lesion on the head and a head injury.,1
"On November 5, 2021, an employee was on a roof, taking measurements of a seam roof panel. The employee slipped on moisture and fell to the dirt ground about 20 feet below, suffering a broken left heel, a broken right shin, and three broken vertebrae.",1
"On November 5, 2021, at approximately 8:30 PM, an employee was operating a reach truck to dispose a scrap walkie-rider into an open-top dumpster. The reach truck was operated on an uneven and damaged surface, with an elevated load, causing it to overturn. The employee's head impacted the concrete surface, resulting in a head contusion and five broken ribs.",1
An employee was treating a patient. The employee turned slightly and felt a sharp pain in their lower back that prevented them from standing up and resulted in hospitalization.,1
"An employee climbed a rolling platform ladder and took down a plastic tube from a surge tank. As the employee was walking down the ladder with the tube, the employee fell off the bottom step and onto his left hip, where he kept his radio unit. The employee suffered a fractured left femur.",1
"An employee was feeding interleave paper into the start of a coil on a slitter machine when their hand was pinched between the hold down and arbors. The employee's right hand was drawn into the in-running nip point, resulting in avulsions to their right thumb and index finger, for which the employee was hospitalized.",1
"An employee was shoveling dust at a mill house. His clothing caught on the rotating shaft of a hammer mill, and he was pulled toward the machine and thrown to the ground. He suffered four fractured ribs, a fractured iliac crest, a lacerated kidney, and contusions to his elbow and leg, all on the right side of his body. He was hospitalized.",1
"An employee was dumping trash from a large mechanical dumpster when his right hand was caught between moving parts, causing his index and ring fingers to be crushed. The employee's ring finger was amputated.",1
"An employee was walking from the sawmill to the pallet plant when they slipped on mud and fell to the ground, resulting in a broken leg.",1
"An employee was installing a gutter when he fell from a ladder, striking the rail of a chain link fence. He suffered a broken right arm.",1
An employee was preparing a foundation drill. His thumb was caught between two pieces of metal and partially amputated.,0
"An employee was operating an edger at a lumber mill. His clothing was caught in the machine and he suffered severe facial and neck injuries, a crushed arm, a broken arm, and a back injury causing paralysis from the waist down.",1
"An employee was pulling a cable up a communication tower using a capstan winch. His left arm contacted the winch line and became entangled under the rope and drum. He suffered three broken arm bones, constriction wounds, and lacerations to the arm. His middle and ring fingers were medically amputated.",1
"On November 6, 2021, an employee was spray painting a petroleum pipeline for rust prevention. The pipeline is supported by wood log cribbing and subject to move when the temperature rises. The pipeline fell and pinned the employee down in the excavation. The employee sustained several broken ribs, breathing obstruction, contusion, and loss of consciousness. He was hospitalized.",1
An employee was running parts on a brake press. The press amputated the tips of his right middle and ring fingers.,1
"An employee was adjusting a belt on a conveyor. The employee's left index and middle fingers were caught in the conveyor's chain and sprocket, and both fingertips were amputated at the first joint.",0
"An employee was staging stainless steel totes on a loading dock ramp. He got off a forklift and walked in front to retrieve a cone when the forklift rolled forward, pinning him against the tote and resulting in a collapsed lung.",1
"An employee was pulling the transmission out of an agricultural work van while the van was jacked up. Other employees tried to move the van up a few inches while the wheels were still on and the employee was underneath. When the jack was moved, the van fell onto the employee, resulting in nine fractured ribs.",1
An employee was working as a cashier when they passed out due to dehydration.,1
An employee's arm was caught between a metal kiln door and its metal doorframe. The employee suffered a compound fracture.,1
"A employee was retrieving a go-kart when it crashed into a rail, resulting in a head injury with a skull fracture.",1
"On November 6, 2021, an employee was using a wrench to release pressure from a carbon dioxide supply pipe. The pipe had been venting and it suddenly stopped. As the employee was checking the pipe, it disconnected and smashed his right index, middle, and ring fingers. The employee suffered bruises too all three fingers and an amputated middle fingertip.",1
An employee was cleaning a jam in a chipper and amputated their left index finger.,0
"An employee was using a cart pusher to bring shopping carts in from the parking lot. The employee was walking in front of the line of carts when his left leg was pinned between two sets of shopping carts, resulting in a leg fracture.",1
An employee tripped on a book bag while walking out of a patient's room. The employee fell to the floor and suffered a broken left hip.,1
"While unloading an aircraft, an employee's foot got caught on a lock and was run over by a unit load device (ULD). The employee was hospitalized with a broken foot.",1
"An employee was on an 8-foot fiberglass ladder, getting an empty box down from shelving in the stock room. The ladder tipped to the side and the employee fell to the floor, suffering broken ribs.",1
"At around 10:40 a.m. November 6, 2021, an employee was breaking down a crane when a boom section struck the front of his lower body. He suffered a probable pelvic fracture.",1
"An employee was drilling holes into an angle iron using a drill press when a piece of their clothing got caught in the drill, resulting in injuries to their hand and wrist.",1
An employee's left middle finger was crushed.,0
"An employee was adjusting the forks on a forklift . He had lifted the forks with both hands at the front and rear of the forks; when he let go of the forks with his left hand, his right index finger was caught between the rear end of the forks and the lift mast. The fingertip was amputated.",0
"An employee was pushing a rack of meat into a cooler. The employee slipped on a patch of ice, fell to the floor, and suffered a broken leg.",1
"An employee was scanning the back of his parked truck when a tractor trailer pulled behind him and pinned the employee between the truck and the tractor trailer, resulting in a bulging disc.",1
"An employee was operating a chainsaw when they sustained a laceration to their right ring finger, resulting in a hospitalization.",1
An employee was on a trailer pulling a pallet towards a K-loader when his foot rolled under the pallet and was pinned between the pallet and a roller. The employee's ankle was broken in three places.,1
"An employee was standing while doing paperwork when he fell backward and hit the back of his head on a tiled floor, resulting in a laceration to the back of his head.",1
An employee slipped and fell. The employee was hospitalized.,1
An employee was adjusting the tension on a conveyor system's roller pin when the wrench slipped and the roller pin crushed the employee's left index finger.,1
"On November 7, 2021, an employee was cutting peppers using a dicer machine. He changed the blade, turned on the machine, and put the peppers back into the machine when the blade contacted his right middle and index fingertips. The employee suffered an amputation without bone loss on his index fingertip and an amputation with bone loss on his middle fingertip.",0
"An employee fell from a ladder onto the ground, resulting in broken ribs and contusions.",1
"An employee was standing on a wooden platform to make an adjustment to a dawg with a hammer. The employee fell off the platform to the ground below, resulting in a laceration to the head and head trauma.",1
"An employee was carrying cinder blocks when they tripped and fell over other cinder blocks in the aisleway. A cinder block landed on their arm, resulting in a fracture.",1
"On November 8, 2021, a wasp stung an employee while she was flagging traffic. She suffered an allergic reaction and was hospitalized.",1
"An employee was installing solar panels on a roof when the standing seam metal roof anchor detached from the roof, causing the employee and the fall protection system to fall to the ground approximately 11.5 feet below. The employee suffered fractures to their vertebrae, wrist, and hand.",1
"An employee and a co-worker were removing forks from an unused forklift in order to remove the fork positioners. They removed a pin from the fork and it shifted and swung toward the employee. The employee attempted to jump over the fork, but it struck his foot mid-air, resulting in fractured bones on the top of his foot.",1
"An employee was making a bale. He brought over an empty pallet and as he turned away, the pallet fell on his right ankle, resulting in a broken ankle.",1
"An employee was performing maintenance on rig tongs. The rig tongs became energized and pinched the employee's gloved hand, and their left ring finger was amputated at the first knuckle.",0
"An employee was trying to remove a jammed board. A running belt caught the employee's left middle finger against a plastic slide. The finger was lacerated, resulting in a fingertip amputation.",0
An employee was visually inspecting the equipment and was standing approximately 5-6 feet away from the pressure hoses when a hose burst and hot water struck the employee on his forearm and abdomen resulting in second degree burns.,1
"An employee was walking near a staging area when they were struck by a forklift carrying a load of boxed product, resulting in a bruise to their head and a laceration to their head that required staples. The employee was hospitalized.",1
"On November 8, 2021, at 5:30 p.m., an employee was walking to a ladder while working on a roof when they tripped on material and fell one story to the ground below, resulting in a fractured leg.",1
"An employee was loading a flatbed trailer when his boot got stuck. He fell off the trailer to the ground, suffering a cut on the head and three broken ribs.",1
"An employee's arm got caught in a conveyor, resulting in a broken arm.",1
"An employee was bailing boxes when the cardboard bailer's index plate fell down and crushed their right index finger, resulting in a partial amputation.",1
"On November 8, 2021, an employee was transitioning from a mezzanine to a fixed ladder when he fell 10 feet from the top rung of the ladder to the concrete floor, resulting in lumbar fractures.",1
"An employee was manually transferring a compressed gas cylinder that weighed 724 lbs. The cylinder fell onto the employee, resulting in broken bones.",1
"An employee was walking to another work area when they slipped and fell, resulting in a broken left ankle.",1
"An employee was on a step ladder at the open back of a CNC machine, watching the oiler system run. The employee slipped and fell toward the opening in the machine. His right arm was caught and broken between the moving CNC head and the back guarding area as he tried to stop his fall.",1
"An employee was operating a membrane press. While trying to remove a cured membrane from the press, the membrane did not blow off the press as normal. The employee cut the membrane from the core when the core ring began rising up the mold. The employee was removing the excess rubber from the core ring when his left hand became trapped between the bottom of the core and the core ring. The employee suffered burn and crush injuries to the their middle, ring, and little fingers. The following day, the employee suffered medical amputations of their middle and ring fingers to the middle knuckle, and the tip of the pinky finger.",0
"An employee was taking down a scaffolding system, standing on the walk board at the second tier, approximately 10 feet off the ground. The employee was tied off to the piece of frame that he was taking off and when he threw it away he fell to the ground, resulting in a fractured pelvis and a broken finger.",1
"An employee was cutting a two-by-four using a table saw. The employee used his left hand to guide the two-by-four through the saw when a kickback occurred, drawing the employee's hand into the saw blade and resulting in partial amputations of the index and ring fingers.",0
An employee was cutting pork using a meat band saw. The meat slipped and the employee's right index finger was amputated at the first knuckle,0
"An employee was connecting a pipe on a machine. The product line was not capped before being switched and hot water (200 degrees F) sprayed onto the employee, resulting in second degree burns to their arms and legs that required hospitalization.",1
"An employee was operating a collator when the conveyor belt stopped. While he was checking the conveyor belt, the employee's finger was caught between the belt and the pulley, resulting in the partial amputation of a finger.",0
An employee was connecting a powered industrial truck (PIT) winch hook to steel plates. The winch engaged and the employee's left hand was caught between the hook and the steel plates resulting in amputation of their left middle fingertip.,0
"An employee walked behind a pallet they were moving when they tripped over another pallet that was staged in the same area and fell to the ground, resulting in a broken left tibia.",1
An employee was servicing a mill with a reported hydraulic leak. A positive wire from a battery came into contact with a hydraulic hose causing a flash fire. The employee sustained burns to the  upper body.,1
"An employee was being trained to operate a machine when their finger was caught on the machine, resulting an a partial amputation.",0
"An employee was assisting a co-worker with separating plastic tote bins when the upper tote bin slipped and crushed the employee's finger, resulting in a laceration and a fingertip amputation.",0
"An employee tripped on a medication cart in a hallway and fell to the floor, resulting in injuries to the right shoulder, right arm, and right hip.",1
"An employee was cutting a thick metal sheet with a sheer when the metal lifted off the surface and came back down on his left right finger, resulting in a fingertip amputation. The employee was hospitalized.",1
"An employee walked up to a mini excavator being operated by a co-worker. The employee was struck by the excavator track, resulting in fractures to their lower right leg.",1
"On November 8, 2021, an employee had finished dipping a bundle of steel joists in a paint tank and had set it to dry on top of a stack of bundles using a 10-ton overhead crane. While the employee was walking to get the overhead crane's hook to move the next bundle, the bundle he had just moved fell, causing him to become caught between the bundle and the paint tank. The employee suffered a broken left femur and was hospitalized.",1
"An employee was running parts through a stamping press. The employee attempted to clear something stuck in the press when their left hand became caught in the press, resulting in an injury.",1
"An employee was using a push stick to cut wood on a table saw when the push stick slipped and the saw blade contacted the employee's left thumb and index finger, resulting in amputations.",0
A patient kicked an employee in the head. The employee suffered a brain bleed and was hospitalized.,1
"An employee was evaluating concrete roof panels. When he stepped backward onto a concrete roof panel, it crumbled underneath him. The employee fell approximately 36 feet through the opening in the roof panel, resulting in injuries that required hospitalization.",1
"An employee was climbing up a ladder to leave a work site. The employee slipped and fell, broke both ankles, and was hospitalized, requiring surgery.",1
"An employee was clearing paper from underneath a sheeting machine when their hand was caught by the machine's belt and pulled into the machine, resulting in  amputation of the ring finger and a partial amputation of the middle finger.",1
"An employee was helping to capture an escaped patient. The employee collided with a police officer and fell, resulting in a broken hip.",1
"An employee was operating a yard mule and fell from the vehicle, resulting in a broken hip.",1
An employee was securing the load straps for a load of lumber. The employee fell and suffered a broken left tibia.,1
"An employee was cleaning a mint press machine. The rag the employee was using got tangled in the rotating tabletop and drew their finger into the press punch. The employee's right middle fingertip was struck by one of the mint press die punches, resulting in a partial amputation.",0
An employee stepped on a metal bar at a job site. The bar punctured the employee's foot. The employee was hospitalized.,1
"An employee fell while climbing down a ladder, landing on the ground and suffering a broken pelvis.",1
"An employee was helping marshal a UPS truck back into a trolley. His thumb was pinned and crushed between the trolley and the truck, and he was hospitalized.",1
"An employee was operating an electric stand up pallet jack to move material. A pallet, weighing approximately 90 lbs., fell from the fourth tier of a shelving system and struck the employee. The employee was hospitalized for bruises and contusions.",1
An employee was riding on a loaded forklift to stabilize the load. The employee fell to the ground and was injured. The employee was hospitalized.,1
"An employee was moving a trash can on a dolly to a dumpster. The dolly wheels caught on an object, causing the employee to fall to the ground and suffered fractures to the left hip and leg.",1
"On November 9, 2021, at 7:00 p.m., an employee was handling mail in a warehouse when they slipped and fell to the floor, resulting in injuries to their back and the back of their head.",1
"On November 9, 2021, an employee was cutting a trailer seal while using a rag to hold the seal when the seal came back around and cut the employee's right middle finger. The employee was hospitalized and required surgery.",1
"An employee was power-washing a fire station from a scissor lift. The power washer triggered the garage door, which opened and caused the scissor lift to tip. The employee fell and was hospitalized, requiring surgery for an upper thigh fracture.",1
"An employee was processing peanuts on a table near an intake fan. The fan cover had a hole that created suction strong enough to pull the employee's right hand into the blade, resulting in two amputated fingers.",0
"On November 9, 2021, an employee was reaching into a sand core machine when the press came down on his left ring and little fingers. He underwent partial medical amputations to both fingers.",0
An employee's finger was caught and amputated in a CNC machine while in setup mode.,0
An employee was attempting to adjust the position of cardboard cores on a wrapping machine when their right arm was pulled into the machine and their forearm was crushed between the rollers.,1
"On November 9, 2021, an employee was getting a machine ready to run when his left middle finger contacted a serrated blade and was partially amputated.",0
"An employee was working with a press. The employee pushed the bottom die in halfway. The punch came down and caught the side of the die. The die shattered and struck the employee in the face, causing facial abrasions and lacerations.",1
"An employee was taking a hose off a boom truck. The employee fell off the truck, suffering a broken hip and hand.",1
"An employee was trying to remove paper from the rollers of a printing press. The rollers caught his hand, crushing and smashing it. He was hospitalized.",1
"An employee was on a rooftop, screwing down a bolt with a wrench. The wrench slipped. He lost his balance and fell onto the screw, which lacerated the inside of his right hand. He was hospitalized.",1
"An employee was running a board through a joiner when a piece of wood got stuck. As the employee attempted to release it, the joiner knives caused amputations to three fingers.",1
"An employee was working on a lathe when his shirt became caught in the machine. His right hand was pulled into the machine, resulting in amputated ring and little fingers.",1
"An employee was standing on a landing while listening to her manager give instructions when she misstepped and fell to the ground, resulting in a fractured right shoulder and hip.",1
"An employee was operating a table-top laminating machine for transformers. As the employee reached beneath the machine frame to adjust the position of a wire on the transformer coil, his finger was caught in the point of operation where the metal lamination plates are automatically inserted into the transformer coil, resulting in amputation of the left middle fingertip.",0
"An employee was stepping down from a framing machine when they fell from a step stool to the ground, resulting in a lower leg fracture.",1
"A bagged product fell from an elevated pallet and struck an employee, breaking his ankle.",1
"An employee was draining a filter bowl of molten metal during a cast shutdown when the molten metal spilled from the bowl onto the employee's legs, resulting in burns to the backside of his legs.",1
"On November 10, 2021, an employee was using a chop saw to cut an overhanging stop attached to a door jamb. When the blade hit the jamb, the blade kicked back and his left hand was pulled into it. His left thumb and middle finger were lacerated and his left index finger was amputated below the first knuckle.",0
"On November 10, 2021, an employee was moving a 15-foot steel beam with an overhead crane. The beam begun to swing, fell, and struck the employee. The employee suffered chin and shoulder lacerations and a broken collarbone and was hospitalized.",1
"An employee was helping to put rebar into a machine's form box. The employee's left hand contacted the form box and the feed drawer came over, resulting in a partial amputation of the employee's left ring fingertip.",1
"An employee was closing a latch from a fixed ladder. The employee fell from the ladder; her head struck the floor and she suffered a broken cheekbone, a broken foot, and a head laceration.",1
"An employee was moving steel plates from a rack to a pallet for shipping. A set of three steel plates came unclamped from the overhead crane and crushed the employee's foot, resulting in multiple fractures and lacerations.",1
"An employee was trying to find the source of a noise in a conveyor system. A roller in the system caught a fingernail on her right hand and pulled it off, along with her index and middle fingertips.",0
"An employee was watching a maintenance employee work on an extruder. The employee's left hand was caught in a pinch point between the pulley and the conveyor belt, and the little fingertip was amputated. The extruder was running at the time.",0
An employee was spotting for a piece of lifting equipment. Another piece of lifting equipment ran over the employee's left foot and broke it.,1
"On November 10, 2021, an employee was approaching a ladder to climb down from a two-story roof. The employee fell from the roof to the ground, suffering a broken femur and cheekbone. The employee was hospitalized.",1
An employee was using a shepherd's hook to dislodge packages that were jammed in a chute. The employee's hand and wrist were trapped between a package and the side panel. The employee suffered a sprained wrist.,1
An employee slipped and fell on the ramp leading to the entrance of the cafeteria at the hospital. The employee sustained a fractured tibia and fibula and a fractured left foot.,1
"A landscaping employee was removing an ice plant, which gave away as he was pulling it from sandy material. The employee fell backward and struck his head on the asphalt access road, resulting in a head injury and cuts.",1
"An employee was operating a terminator machine to add connectors to wire harnesses. The employee's finger got caught in the machine when a pedal was pushed, amputating their finger.",0
An employee was walking across a cargo unloading pad when a forklift backed into her. She suffered a head injury and lost consciousness.,1
"An employee was assisting in re-positioning a 1-ton steel safety cage over a splice plate when the cage crushed the employee's gloved left middle finger, resulting in a fingertip amputation.",0
"An employee was riding on the back step of a garbage truck. The truck hit a pothole and the employee fell to the ground, suffering a spinal contusion and weakness in the upper limbs.",1
"An employee was on a boom lift, guiding cable through riser brackets. The arm of the boom lift hit a fence, causing the lift to spring upward. The employee's right foot was in the fixed foot pedal control, and he suffered a compound fracture to the ankle and lower leg.",1
"An employee was unloading a trailer when they tripped over a pallet and fell, resulting in a broken ankle.",1
An employee was using a table saw to trim wood pieces. The saw amputated the employee's left index fingertip.,1
An employee was cleaning an auger blade on a conveyor when the auger pulled the employee's arm into the machine and caused a partial arm amputation. The employee was hospitalized for surgery.,1
"An employee was parking a pallet jack. The employee's right ankle was pinned between the jack and a metal safety rail. The ankle was broken and lacerated, and the employee was hospitalized.",1
"On November 10, 2021, an employee was loading a box truck. As they used their right hand to raise the lift gate, their left index finger was pinched between the liftgate and the truck. The employee sustained an amputation to the end of the finger.",0
"A forklift trainer was teaching another employee how to use a stand-on powered pallet jack. The trainee backed up the powered pallet jack, then moved it forward. It pinned the trainer's leg against a guardrail, causing a compound fracture.",1
"An employee was moving objects across a roof when they fell through a hole that was covered by peel paper, resulting in broken ribs and other broken bones.",1
"An employee was filling chemical tanks when the muriatic and chlorine chemical intake lines were switched, resulting in a chemical reaction and chemical off-gassing. The employee required hospitalization for chemical vapor inhalation.",1
"Employees were demolishing a garage door. The torsion spring broke and struck and employee in the face, chest, and arms, causing lacerations.",1
"An employee was cleaning a rotator shaft with sandpaper. The employee's gloves got caught in the rotating shaft, pulling his right hand into the machine. Two of the employee's fingers were amputated, and two were reattached.",1
An employee was cleaning a bandsaw when it amputated the tip of one of his fingers.,1
A therapist was helping lower a resident to the floor after the resident's legs buckled. Both people lost balance and fell on the floor. The employee suffered a broken left tibia.,1
"An employee was exiting a room when she fell onto the concrete floor and landed on her hip, resulting in a broken hip.",1
"An employee was on a ladder, working on lighting in a conference room ceiling. The employee was shocked and fell from the ladder to the floor. The employee lost consciousness and sustained burns.",1
"An employee was on a 28-foot ladder, preparing to change an aerial cable line. The ladder fell backward with the employee on it. The employee suffered a broken sternum and a head injury.",1
An employee was standing behind a pallet jack. The employee used the throttle to move the pallet jack; it reversed instead of going forward and pinned his left leg to the wall. He suffered a fracture to the lower leg.,1
"An employee was connecting batteries to an uninterruptible power supply system. A few batteries shorted out, causing second-degree burns to his hands. He was hospitalized, requiring skin grafts.",1
An employee was cutting a 12-inch steel I-beam. A spark from the employee's cutting torch lit the employee's jacket on fire. The employee suffered burns to the upper and lower back.,1
"An employee was herding cattle when a steer kicked her in the left leg, resulting in a tibial plateau fracture that required hospitalization and surgery.",1
"An employee was helping another company's employees remove a trash cart from a dumpster when their finger was pinched by an opening on the trash cart, resulting in an avulsion and fracture to their left middle finger.",1
An employee was stepping off a front-end loader when he slipped and hit his head on concrete. The employee was hospitalized.,1
"An employee began to feel ill at 3:30 a.m. on November 11, 2021, after the last break of his shift. He was hospitalized, suffering from metal fume fever and hypoxia.",1
"An employee was inspecting paper for defects while standing on the end of a roll of paper in a machine. The machine was jogged and pulled the paper out from under the employee's feet. The employee fell to the floor, suffering a possible hip fracture.",1
"An employee and co-workers were replacing the existing HID parking lot fixtures with new LED fixtures. During the process of removing the existing fixtures, the lighting circuits were energized by a photocell. The employee attempted to strip wiring to make the electrical connections for the new fixtures when they were electrocuted, resulting in hospitalization.",1
"On November 11, 2021, at approximately 5:45 AM, a temporary employee tripped over a wheel on a smock holder and fell to the floor. The employee was hospitalized with a hip fracture.",1
"A forklift backed into an employee's leg. The employee fell forward, and the forklift then rolled over her leg. She suffered a broken and dislocated ankle.",1
"An employee was standing and talking to a co-worker when a stack of mounted industrial tires fell over and struck the employee, resulting in a fractured pelvis.",1
"An employee was operating a press when their right hand was caught by a demolding tool, resulting in amputation of the middle fingertip.",1
"An employee was diagnosing an issue on a destoner. The employee went up a set of stairs and climbed onto the equipment. To get down, the employee jumped down onto the 180-degree pre-heat water reservoir cover. When the employee jumped down, his right leg landed on a carrot, which caused part of his right leg to go into a 3-by-3-foot open hatch and into the water below. The employee suffered second degree burns to his lower right leg.",1
"The injured employee was talking to another employee. When the employee turned to leave, they twisted their left ankle and fractured it.",1
"An employee was working near a machine mixer housing and charge belt. The machine activated and the employee was trapped between the housing and the belt, suffering broken ribs and contusions.",1
"A temporary employee fell from a ladder, suffered a broken bone, and was hospitalized.",1
"An employee was trying to fix the drive chain of a machine that made pot stickers. While the employee was working on the back end of the machine, it was cycled. The employee's left index fingertip was caught on the chain and sprocket and partially amputated (without bone loss).",0
"An employee was disassembling a crane. While attempting to adjust a hoist drum, the employee fell from the crane to the ground below, resulting in leg fractures.",1
An employee was clearing a paper jam in a printing press. The press caught his left hand and amputated the tufts of the index and middle fingers.,0
"An employee operating an electric pallet jack went to turn in an aisle at the same time a forklift operator carrying empty pallets was turning into the aisle. The pallet jack and the forklift collided and a piece of wood from the pallets got stuck in the employee's left calf, resulting in hospitalization.",1
"An employee was removing bolts from a boiler door. The employee fell to the ground, suffering a chipped bone in the elbow as well as a possible triceps injury and a possible concussion.",1
An employee was helping roll material onto a coil. The employee's right index fingertip was amputated in a slot in the material.,0
"An employee fell while accessing a ladder to a roof. The employee landed on the ground and suffered fractures to the left tibia, right tibia, left radius, and right ulna.",1
An employee was walking out of the kitchen when she tripped and fell to the floor. She was hospitalized with a left hip fracture.,1
"An employee was using a radial saw to cross-cut a piece of plywood. The employee's left hand was pulled into the saw, which amputated three of the employee's fingers.",1
"On November 12, 2021, at 9:45 AM, an employee was using a pallet jack to deliver goods to the front door of a school. As he started to turn, the load shifted and began to fall. The material fell and struck his left leg and hip, resulting in a broken left femur.",1
"An employee was welding a metal strap on both sides of a 20-foot long pipe. There was a welding machine on each side of the pipe. The pipes were placed on a conveyor which moved the pipes toward the pre-stress wiring machine. While the employee was walking between the pipes, a pipe rolled backward off the conveyor and caught the employee between the pipes. The employee sustained broken ribs and was hospitalized.",1
"An employee was putting up insulation while on an 8-foot step ladder when the ladder tipped over and the employee fell 5 feet, resulting in four broken ribs.",1
"An employee was moving a water pump with a skid steer. When the employee reached the top of a hill, the water pump slid off the skid steer's forks and hit the cab. It entered the cab and struck the employee, who suffered a laceration to the left calf.",1
An employee was lifting a spray tank off a truck when the handle struck his right eye.,1
"On November 11, 2021, an employee was performing die setup on a hydraulic press. The employee loaded dies into the press and actuated it to verify proper die alignment. The upper and lower dies made contact resulting in die failure. Fragments of the die struck the employee's hand causing a severe laceration and fracture to their index finger. In addition, fragments of metal were embedded into both hands of the employee's hands. There was no machine guarding in place and energy control was not performed during die set up.",1
"An employee fell from a horse and suffered a broken left femur. He was hospitalized, requiring surgery.",1
"An employee was inspecting overhead HVAC equipment from an 8-foot A-frame ladder. The employee fell, hitting the ground and a white board and suffering head injuries. The employee was hospitalized.",1
"An employee was cleaning up cotton from around a conveyor belt. He fell onto the belt, passed under an auger that was over the belt, and hit a metal support beam with his head. He continued down the conveyor and a piece of metal overhead struck his left eye. He suffered trauma to the eye, as well as chest fractures.",1
"An employee was changing a spool on a machine. While the employee was lining the adjustable drive rod up with the drive rod hole in the reel, and closing the pintles into the reel's arbor hole, the employee's right little finger was pinched between the collar of the pintle and the arbor hole. The employee suffered a partial amputation (without bone loss) to the finger.",0
"An employee was using a microtome to prepare slides for staining. The microtome blade lacerated the employee's left index finger, resulting in the amputation of part of the fingertip (without bone loss).",1
An employee operating a wood chipper was attempting to stop the belt from slipping by spreading sawdust on the belt. The employee's arm was pulled into the chipper and was amputated at the elbow.,0
"An employee was removing mirrors from a wall. The mirror broke diagonally and swung out, and the employee sustained neck lacerations.",1
"An employee was applying lubricant to a machine in ""auto-mode."" The employee climbed over the slide and entered the area where the machine moved the slide traveler, which impacted his right leg and pushed him against the machine. The employee sustained a fractured right femur.",1
"An employee was removing bottles of product off a conveyor belt. The tip of her left little finger was caught by a cleat on the belt, and the fingertip was amputated.",1
"An employee slipped on a paper plate while working at a high school cafeteria and fell, resulting in a broken left femur.",1
"An employee was using a stand-up tugger to move materials when a dry erase board on the front of the tugger came loose. The employee attempted to pick up the board and place it in a box behind him on the tugger. While the employee was turned, the tugger drove across a slope, which caused the employee to lose his balance and fall off the tugger. The employee sustained a broken left ankle.",1
"At approximately 4:00 PM, an employee was working on the back of a pressure fryer. The employee's arm slipped and entered the fryer vat, resulting in first- and second- degree burns on his hand, wrist, and forearm.",1
"An employee was driving a motorcycle around a complex. The front tire lost traction during a turn and the motorcycle fell on top of the employee, who suffered a broken tibia and fibula. He was hospitalized, requiring surgery.",1
"The injured employee was standing at his desk. A forklift operator  made a sharp turn and struck the employee, crushing him between the desk and the forklift. The employee was hospitalized for a fractured hip.",1
An employee was using a circular saw to score 1/8 inch plywood. The saw blade amputated the tip of his left index finger.,0
"An employee was getting up from her chair when her leg got caught on the base of the chair and she fell, resulting in a fractured hip.",1
An employee was assisting a co-worker in moving a shelf when the employee fell from a height greater than 4 feet and landed on a scanner.,1
"An employee fell near the front of a truck, suffered a broken jaw, and lost consciousness.",1
An employee was stocking produce when she tripped over plastic wrap hanging from a pallet and fell to the floor. The employee was hospitalized for a broken hip.,1
"An employee was walking from the parking lot into work when they slipped off the curb and fell, resulting in a fractured right leg.",1
"An employee was on top of a battery condenser. The equipment caught his left arm, degloving it and breaking it in several places.",1
An employee was weed eating on a job site and was putting his gun in his glove box. The gun accidently discharged and the bullet hit his knee.,1
"An employee fell in the yard, landing on the ground and suffering an elbow injury that required surgery.",1
"An employee was operating a skid forklift, which collided with another forklift. The employee sustained multiple injuries.",1
"An employee was unrolling a soft hose when he lost his balance, tripped on the hose, and fell to the pavement. The employee sustained a fractured left hip.",1
"An employee was pressing a core on a power line conductor wire when the core gave way, causing the hoist to strike the employee's jaw. The employee sustained a laceration and was hospitalized.",1
An employee was driving an order picker and turned sharply near a shelving unit. The employee stuck out their arm in reaction and their arm went through a window. The employee was hospitalized for a laceration to their arm including a cut artery.,1
An employee was replacing a belt on a conveyor. His right hand fingers were caught after testing the belt that was replaced and amputated.,0
"On November 12, 2021, a nurse slipped on a wet floor, fell, and fractured her right wrist.",1
"An employee was decorating when she climbed onto an enclosed area and sat on a box. The box caved in and the employee fell about 6 feet to the floor, resulting in a fractured T9 vertebra.",1
"An employee was rigging piles on a trailer when the piles shifted and the trailer tire struck the employee, resulting in a broken right leg and right ankle.",1
"An employee was removing wooden trash from a 12-foot-high platform. He lost his balance and fell to the hard floor, suffering a broken leg and ankle. Fall protection was not worn at the time.",1
"An employee was performing deck form installation when he slipped and fell 20 feet, landing on his back. The employee sustained bruising and fractures to his ribs and back after landing on the ground.",1
An employee was in an aerial lift when he contacted a 13.2 kV power line with his back. He was shocked and suffered second- and third-degree burns to the back.,1
An employee was attempting to pick up a hide from the ground while holding a skinning knife in one hand and lacerated his chin.,1
"An employee was standing in a warehouse next to a pallet, waiting for someone to get a pallet of product for him. A forklift struck the employee and crushed his leg.",1
"An employee was performing preventive maintenance on a conveyor. It suddenly started while he was inside the belt, and the slats caused multiple fractures to his upper and lower leg.",1
"A Garney Holding Company employee was helping maneuver an 84-inch pipe being installed in a 14-foot trench excavation. The employee was using PVC tubing to tilt the pipe downward to cross under a utility line; the tubing lost contact with the pipe, causing the employee to slide downward and make contact with the pipe, then the bottom of the trench. The employee's right ankle was broken.",1
An employee was performing a wheelchair lift check on a shuttle bus when his finger got caught between two moving parts of the lift. The employee's left middle finger was medically amputated.,0
"An employee was standing on an 8-foot stepladder, repairing a conveyor on a process line. He fell from the ladder to the concrete below and suffered fractures to the left hip, the left-side pelvis, and four ribs.",1
An employee was maneuvering a pallet jack. The employee's little finger was crushed between the pallet jack's handle and a concrete bollard. Part of the finger was amputated.,1
"An employee placed a hot pan of butter into a sink of water causing the butter and water to splatter and burn the employee's head, face, neck, left arm, and right upper leg.",1
"An employee was standing on a manual roller conveyor to unload stock when the conveyor shifted and the employee fell 3 feet onto their right side, resulting in a fractured right femur and hip that required hospitalization.",1
"An employee was working from a scaffold platform when an I-beam fell and struck their finger, pinching it between the I-beam and the scaffolding frame. The employee's finger was amputated.",0
"An employee was draining water out of a flare line. The employee opened the valve and was walking away when a flare ignited, resulting in second and third degree burns.",1
"On November 13, 2021, at 1:15 PM, an employee was preparing to clean the inedible conveyance system and suffered the amputation of their left middle fingertip. The machine was not locked out/tagged out at the time.",0
"On November 13, 2021, at approximately 11:45 AM, an employee was clearing rubber that was jamming a machine when the mixer blade caused amputations to their fingers. The employee was hospitalized.",1
"On November 13, 2021, an employee was using a pipe wrench to unjam a pulley on a conveyor system. When the pulley unjammed, his right ring finger was caught between its frame and the pipe wrench. The fingertip was amputated at the bottom of the nail.",0
"An employee misstepped while descending a ladder and fell approximately 7.5 feet to the floor below, resulting in a potential broken leg.",1
"An employee was moving hand weights to a wall fixture when the shelf gave way and the merchandise struck the employee's head, resulting in a concussion.",1
"An employee was blowing off debris and baking products from a conveyor belt using an air gun to prepare for the next production run. In the process of blowing off the conveyor belt, the air gun got caught in the belt, causing it to spin and strike the employee in the left arm. The employee suffered a fracture above their left wrist.",1
"An employee was helping with crane operations while a heating system was being installed. The crane hook broke and hit the employee on the back, breaking bones in the employee's lower back.",1
"An employee was removing a marine hanging staging scaffold when he fell approximately 25 feet to the bottom of the tank. The employee sustained a fracture to their right orbital socket, a contusion, and a compression fracture to their vertebrae. The employee was hospitalized. Fall protection was not worn at the time.",1
"At about 10:55 a.m. on November 14, 2021, a rubber mixer dust collector had an overpressure event. The resulting flashover severely burned an employee.",1
An employee was walking down a hall when she fell backward. Her head hit the wall and she suffered a spinal injury.,1
"An employee fell off a ladder while reaching for a shoe. She landed on her back and head and was hospitalized, suffering from a headache and dizziness.",1
"An employee was mopping the floor when she slipped and fell on the wet floor, resulting in a fractured left pelvis.",1
An employee was descending a ladder after patching drywall holes when he lost his balance and fell approximately 5 feet to the ground. The employee sustained a broken left wrist.,1
"An employee was helping to install a forging hammer sow block. He was standing near the hammer and guiding a forklift operator who was manipulating the suspended block. The employee was directing the forklift backward to realign the block and had his hand on top of timber that was connected to the load strap. As the block was coming out, it contacted the bottom of the hammer and caused the timber to rotate. The employee's hand was crushed between the timber and the forklift tine.",1
An employee was performing conduit work when he fell 6 feet from an A-frame ladder. The employee sustained a compound fracture to their lower left leg.,1
"An employee was in a manlift basket with a co-worker, washing a drilling rig in preparation for the rig to be moved off site. The manlift basket became caught on the rig, and when the basket released, it bounced and caused the employee to be ejected. The employee fell approximately 20 feet to the ground, resulting in a broken left arm and pelvis.",1
"Employees were clearing die cast lines. The injured employee was reconnecting the hot oil hose to the die frame. The employee pulled on the hose, which came in contact with the hot oil valve and caused hot oil to release. The hot oil struck the employee who suffered third degree burns to the upper right arm, ear, face, and neck. The employee was hospitalized.",1
"An employee was standing behind a material handling truck watching another employee bring the boom into the cradle position. A vehicle struck the employee (as well as the rear of the truck), breaking the employee's left femur.",1
"An employee was attempting to unclog a relief line that was piled with sediment on a boiler. When he unclogged it, there was a pressure release, and hot water shot out of the line and contacted the employee's left shoulder and arm, resulting in burns.",1
"An employee's right arm contacted a cotton processing machine, resulting in amputation above the elbow.",0
An employee was operating an electric pallet jack when it struck a parked van. His legs were pinned between the bumper of the van and the pallet jack. His right ankle was broken and he suffered contusions to the left lower leg/ankle. He was hospitalized.,1
"An employee was cleaning up a dig site and fell 3 feet into an uncovered pier hole, resulting in a broken right femur.",1
"An employee was exiting his jockey truck cab when he misstepped and fell to the ground, landing on his right hip. The employee sustained a right hip fracture that required surgery.",1
"While unloading a truck, an employee fainted and hit his head on the ground. The employee had a heart attack.",1
"An employee was sitting in a rolling chair inside a guard booth when they slid backward and fell  down the concrete steps, resulting in injuries to their head, neck, and back.",1
"An employee was backing up a pallet jack and hit a stack of pallets, causing a board to break off a pallet and strike the employee's foot. The employee sustained a laceration.",1
An employee was cleaning a paint conveyor belt when they were pulled into the conveyor belt and 20-inch rollers. The employee was hospitalized with 11 broken ribs.,1
"An employee was straightening boards being fed into an edger. He reached to straighten a board and tripped the electric eye, which shut the machine down. The roller came down and pinned the employee's right arm causing damage to the soft tissue on the forearm.",1
"On November 15, 2021, at approximately 6:52 AM, an employee was walking from her vehicle to the underground building entrance. The employee was walking on a landscaped area when she slipped and fell, resulting in a fractured leg.",1
"An employee was repairing an airbag for a plastic press. As he climbed out from underneath it, the machine activated and amputated his left foot.",0
An employee was inspecting a coal conveyor belt. The idler pulley system caught the employee's clothing and pulled in the employee's arm up to the elbow. The employee suffered multiple fractures and lacerations and was hospitalized.,1
"An employee was working on a 4-foot ladder to change recessed light bulbs for a 10-foot ceiling when he fell from the ladder, resulting in hospitalization due to a possible broken left hip and a left hand injury.",1
An employee was inside an aerial lift basket approximately 140 feet above ground level prepping for installation of an intake hood. The employee was connecting a welding lead to the welding machine. An overhead bridge crane struck the aerial lift. The boom of the aerial lift collapsed and the employee was catapulted out of the basket falling 34 feet onto the top section of the crane. The employee remained attached to the basket with the lanyard he utilized. The aerial lift basket then landed on top of the employee striking and crushing the employee. The employee suffered multiple fractures.,1
An employee was trying to unjam paper in a machine. The employee's right index finger was caught by a roller and injured.,1
An employee was inspecting an elevator shaft when they fell down the shaft from the second floor and hit the ground below. The employee sustained a broken femur and a dislocated pelvis.,1
"On 11/15/2021, at 9:30 AM, an employee was ripping boards on the rip saw when a board splintered and shot splinters into his legs and abdominal area.",1
An employee was working in the engine compartment of a bus. The bus was turned on and the employee's hands were caught in a pulley. The employee's left hand was injured.,1
"An employee was loading material into a die cutter when her finger was caught in the gripper at a nip point, resulting in an amputated left ring fingertip.",0
An employee was inspecting a mold suspended by a hoist when the hoist failed and the mold struck the employee in the head and lower body. The employee sustained a broken heel and lacerations to their head and thigh.,1
"An employee was inspecting a fire sprinkler system when he lost his balance and fell 6 feet from an A-frame ladder to the ground below, resulting in a fractured right arm.",1
"An employee was moving boxes of mail on a loading dock. The employee tripped on a dock plate and fell to the concrete floor, suffering a broken left hip. She was hospitalized and underwent surgery.",1
"On 11/15/2021 at 11:00 a.m., an employee borrowed a ladder to check on top of their truck. On the way up or down on the ladder, the employee fell to the ground and suffered a broken shoulder and a bruised lung.",1
"An employee was helping to move a fluid bed dryer when an internal mechanical lifting device failed and a piece of equipment struck the employee's arm. The employee sustained torn muscles, requiring surgery.",1
"An employee was changing a fiber drum believed to be empty when the drum fell, causing the employee's right ring fingertip to be caught in a pinch point in the conveyor belt and amputated.",0
An employee was weighing laundry when they were struck by the sling ring that holds laundry. The employee sustained a broken foot that required surgery.,1
An employee was troubleshooting a block making machine. The machine cycled and amputated their right thumb. The machine was not locked out at the time.,1
"An employee was using a forklift to retrieve pallets to load a trailer. As the employee came through a door, another forklift's forks entered the compartment of the employee's own vehicle. The employee's foot was injured.",1
"On November 15, 2021, an employee was splashed with molten metal while measuring steel in a mold. The employee sustained multiple third degree burns on their neck, right hand, and right leg.",1
"An employee was walking in a pulp dryer area when he slipped and fell to the floor, resulting in a fractured right hip.",1
"An employee was operating the stabilizers on a boom truck. A stabilizer pinched the employee's left ring finger, amputating the fingertip.",0
"An employee was repairing an oven that contained atmospheric gases (hydrogen, nitrogen, carbon monoxide, and sulfur) to prevent burning product. The employee was overcome by carbon monoxide gas and was hospitalized for carbon monoxide poisoning.",1
An employee was moving parts with a pallet jack. The pallet jack displaced a stack of plastic totes in front of the material being moved. The employee attempted to stop the stack of totes from falling and fell to the ground. The employee sustained a torn muscle in his left knee that required surgery.,1
An employee became dizzy while cleaning and fell. Her head struck a jewelry peg and then the floor. She suffered a head contusion and was hospitalized.,1
"An employee completed repairs on an electric motor under a platform and was replacing the grate covering of the motor housing area. As the employee picked up and moved the grate cover, an air line was struck and cut in half. The employee attempted to shut the air off and stepped through the opening of the motor housing area. The employee fell approximately two feet, resulting in a fractured left shoulder.",1
"At about 2:30 p.m. on November 16, 2021, an employee was checking the sight glass for a liquid level on an ammonia refrigeration system. The sight glass broke, and liquid ammonia sprayed out of the opening onto the employee's face, chest, and throat area, resulting in chemical burns.",1
"On November 16, 2021, a truck driver was removing straps from a load of utility poles on a flatbed trailer. When he removed the last strap, the top pole on the load rolled off and struck the left side of his body, crushing his left wrist and the lower part of his left leg. He was hospitalized, and the leg was medically amputated below the knee. He also suffered a brain injury and two fingers were medically amputated.",1
"On November 16, 2021, an employee was working with a band saw. He was correcting a piece mark when the rag used to wipe it off became caught in the band saw and the employee's fingertip was amputated.",0
"An employee was installing insulation to a new commercial building. The employee fell through a hole in the roof paneling to the concrete ground 25 feet below and suffered facial fractures, a broken left wrist, broken ribs on the left side of their body, and a punctured lung. The employee was not tied off at the time.",1
"Two employees were working with a combative patient. The patient struck and kicked one of the employees, injuring his face, neck, left ankle, and left upper arm. The employee was hospitalized.",1
"An employee was working at the cash register. When they bent down to tie their shoe, they lost balance and fell to the floor, resulting in a broken tibia.",1
An employee was delivering forklift parts to a battery manufacturer when he misstepped and fell to the ground while exiting the van. The employee sustained a left tibia fracture and a dislocated knee.,1
"An employee was using a fire extinguisher to put out a smoldering fire on a truck tailgate. The employee inhaled some of the smoke and fire extinguisher powder, suffered respiratory distress, and was hospitalized.",1
An employee was standing outside a 5-foot diameter concrete manhole riser installing sealant near an excavator. The excavator moved forward and pinned the employee against the riser. The employee sustained a broken leg and ankle and was hospitalized.,1
"An employee was taking panels off a column with a come-along tool. The tool snapped out and hit the employee on the leg, causing an open wound.",1
"An employee was climbing down a fixed ladder on a wind turbine tower. He fell and landed on a platform on the tower level below, suffering head trauma, a broken leg, and loss of consciousness. He was hospitalized.",1
"On November 16, 2021, an employee was standing on a work platform to clean out an equipment bay on the side of on an aircraft. The employee walked across the platform to retrieve equipment and stepped off an area of the platform that was unprotected due to a retracted slide out. His elbow struck the work platform, resulting in an elbow fracture that required surgery and hospitalization.",1
An employee was climbing a ladder to repair a saw when they slipped and fell approximately 4 feet to the concrete floor below. The employee sustained a broken leg and a fractured knee.,1
"Two clamp trucks collided as one was coming out of an aisle. The fork on one truck struck the other truck's operator in the hip/pelvis area, causing a fracture there.",1
An employee was inspecting a crane when his right foot became lodged between the crane's wire rope and the drum structure for the rope. The foot was amputated.,1
"An employee was tendering the grout pipe line to the wall of structure. He jumped from a higher level down onto the planks of the scaffold on a lower level, collapsing the planks and falling 17 feet to the ground. The employee sustained a compound fracture on the lower left leg and a fractured spine.",1
"A substation construction crew was installing two feeder breakers at a worksite. The job consisted of adding one 25kV feeder bay with isolation switches on the south end of the existing bus and one 1200A self-contained breaker. The job also included the installation of new 25kV Bus PT (Potential Transformer) module framing on the south end of the bus (framing) and connecting voltage inputs from the PTs to the new feeder breaker. Part of the existing bus was removed to install the new bus. Employee 1 climbed on the top of the substation to take measurements for the bus framing parts. Employee 3 was operating a manlift to lift Employee 1 onto the top of the substation framing. Employee 2 was fabricating the bus framing parts to be installed on the top of the substation framing. A few minutes after climbing onto the substation framing, Employee 1 sustained second and third-degree burns to the arms, hands, and upper torso from an arc flash. Employee 1 was hospitalized.",1
"An employee was moving livestock off a trailer. An animal was on a rope and pulled back, which pulled the employee's left hand into the side of the trailer. The employee suffered an injury to their middle finger that required amputation.",0
"A temporary employee was putting scrap foam on a conveyor system. The employee noted a piece of scrap in the conveyor shaft area. As the employee reached into the shaft area, the employee's right arm was pulled into the roller and fractured. The conveyor shaft area was not guarded at the time.",1
"An employee was climbing a ladder to check a metal detector when he fell approximately 4 feet to the floor, landing on his back, resulting in a back injury.",1
"Employee 1 was using a crane truck to pull pipe out of a wet well to be cut for removal. As the pipe was brought out of the 40-foot well, employee 2 rolled the pipe to be cut on the other side. While it was still connected to the hoisting cable, the pipe kicked back and knocked employee 1 into the wet well. Employee 1 sustained a right wrist fracture, back fracture, and a torn aorta.",1
An employee was operating a forklift in a warehouse. His left leg was caught and broken between the forklift and a metal pallet rack.,1
An employee was digging a hole when they cut a conduit that was leaking water in order to cap it off. The conduit contained a live electrical line that flashed and resulted in burns to the employee's arms and leg.,1
An employee was standing on a work platform and transferring boxes to the level below when he fell approximately 7 feet to the floor. The employee sustained a broken rib and collar bone and a collapsed lung.,1
"An employee was using a pneumatic wrench to tighten a clamp when their thumb became pinched in the clamp, resulting in amputation of the thumb tip.",0
An employee was bending a metal tube using a machine when their little finger was crushed between the tube and the machine and was later amputated.,0
"On November 16, 2021, an employee was loading product onto a truck at the warehouse loading dock.  While unjamming the dock plate, his right middle finger was caught between the dock plate and the trailer's threshold, resulting in amputation of his right middle finger at the nail.",0
"At 1:15 p.m. on November 17, 2021, an employee was testing a three-way air actuating valve. The valve closed, catching the employee's left index finger in one of its three ports. The finger was broken and the fingertip was amputated.",1
"A forklift came around a corner and ran over an employee who was hydrotesting fire hoses. The employee suffered a collapsed lung, broken ribs, a possible broken arm, and a possible spine fracture. The employee was hospitalized.",1
"An employee was holding rebar while a machine bent it. The employee's left glove was caught in a pin, causing the employee to suffer an amputation to the index finger.",1
A driver was using a pallet jack to move a pallet to the back of a trailer when a slat broke on the pallet and caused the pallet jack to tilt. The driver fell off the back of the trailer about 4 feet to the pavement. The driver sustained an open fracture to the right elbow that required hospitalization and surgery.,1
"An employee was wiping down the inside of a car door. The door shut on the employee's right index finger, causing an amputation to the finger.",0
"An employee was moving pipe on a trailer when his leg was struck by a joint of 6-inch pipe that rolled off a flatbed trailer. The employee sustained a leg fracture, which required surgery.",1
Two employees were handling a metal piping tool. The tool shifted and struck one of them on the right side of his face. He suffered an injury to the cheekbone and was hospitalized.,1
An employee was unhooking a utility pole from a trailer. His left leg was caught and broken between the pole and the trailer.,1
"An employee was about to clean a 2,500-pound part from a CNC router. A forklift was preparing to lift the part so its underside could be cleaned. As the forklift adjusted position, it knocked over the part, which tipped onto the employee's leg below the knee. The employee's leg was crushed.",1
An employee was walking down parking garage stairs when they fell and broke both ankles.,1
"An employee was manually engaging the ground handling wheels for a helicopter. He lost his grip on the tool, which struck him above the right eye.",1
"An employee was operating and test-driving a forklift. The forklift struck a low metal post and overturned. The employee suffered a broken left leg, a dislocated left shoulder, a back hematoma, and a right foot laceration and was hospitalized.",1
"On November 17, 2021, an employee was attempting to clean glue off a laminating machine roller. The employee's hand became caught in the roller, resulting in burns and fractures to the employee's hand.",1
"An employee was climbing up a 20-foot scaffold to work on a chimney. The employee fell, landing on a wooden deck about 15 feet below and suffering a broken left hip.",1
"On November 17, 2021, an employee was verifying the operation of a bulb crusher machine that had been restarted after a jam. The machine was jogged and pulled in the employee's right-hand glove. He suffered injuries resulting in the amputation of his right index and middle fingers.",0
"An employee was removing a mast guard from a forklift to repair several bends in the guard. While removing the bolts on the guard, the guard fell and crushed the employee's right middle and ring fingers.",1
An employee was trying to remove left-over dough from a machine and amputated his right ring fingertip.,0
"A saddle washer snapped while a piece of metal was being lowered. The piece of metal struck an employee in the face, causing facial injuries.",1
An employee was putting a disk on a conveyor table using a hoist. The disk came off the hook and landed on his left ring finger. The finger was amputated.,1
An employee was holding the support structure of a concrete chute. The concrete was not releasing; the employee was shaking the chute when his left middle fingertip was caught between the concrete bucket and a metal box. Half an inch of the fingertip was amputated.,1
"An employee was repairing polycarbonate roof panels on a cotton warehouse. The employee stepped on one of the polycarbonate roof panels and fell 21 feet to the concrete floor below. The employee sustained two broken hips, a broken nose, and broken ribs. The employee was hospitalized.",1
"An employee fell to the floor after being pushed by another employee, resulting in a hip fracture. Surgery was needed to repair the injury.",1
An employee was changing the attachment on the front of a telehandler forklift. His finger was caught between the attachment and the forklift. He suffered a partial amputation to the finger.,0
"On November 19, 2021, an employee was centering a fabric lead on a rubber calendar when their right hand was caught and crushed in a nip point, resulting in amputation to finger(s).",0
An employee was closing a manual freight elevator door. The employee's left thumb was crushed in the door.,0
"An employee was climbing down a ladder on a ready-mix truck. A lanyard, caught on a bar on the truck, brought him to an abrupt stop; this caused his right foot to catch in the ladder and he fell. He suffered injuries to the neck, lower back, right hip, right knee, and right ankle and lost consciousness.",1
An employee was troubleshooting an auger. The blade caught his finger and amputated the fingertip.,0
"An employee was adjusting 4-by-4 cribbing before a forklift lowered a double-stacked load of 2-by-4-by-8 lumber. The far end of a single piece of cribbing fell off the support, and the employee's right middle finger was crushed between the cribbing and the underside of the double-stacked lumber. The fingertip was amputated (without bone loss).",0
"An employee was climbing a ladder to a roof when they lost their balance and fell approximately 16 feet to the ground below, resulting in a fractured pelvis.",1
"An employee was rearranging markers on a 1,200-volt power line. A mechanical failure in the wire caused the lockout/tagout to fail. The employee sustained burns to both hands and was hospitalized.",1
"An employee was driving a van in an auto lot. A transport truck struck the van, and the employee suffered broken ribs and a thoracic hematoma.",1
"An employee was standing with a fully loaded walkie pallet jack on the side lift gate of a delivery truck, preparing for a delivery. The lift gate platform broke at the hinges, causing the employee, the pallet jack, and a loaded pallet to fall about 4 feet to the concrete ground. The employee suffered a broken lower right leg.",1
An employee was loading brick into a brick crushing machine. The machine rollers caught the employee's left hand and pulled in his left arm. The arm was amputated. A safety limit switch on the machine was not in operation at the time of the incident.,1
"An employee was making adjustments to a mill stand to remove a mark from a pipe. The employee placed his hand on the pipe and instructed another employee to jog the mill. The employee's right hand was crushed between a moving side pass roll and a pipe, resulting in compound fractures to their right hand, thumb, and middle finger.",1
"An employee was holding a machine part while forming it with a hydraulic brake press. The brake press caught the employee's right-hand fingers and partially amputated the index finger, as well as breaking the middle finger.",0
"An employee was climbing a ladder while carrying a gasoline-powered leaf blower when he lost balance and fell six feet, resulting in a back strain.",1
A border patrol officer unintentionally fired his gun at a shooting range. The bullet hit the officer's left ring fingertip resulting in amputation.,0
"An employee was using a circular saw on a freezer panel. Part of the panel shot back, passing through the employee's face shield and into the employee's right eye. The employee was hospitalized.",1
"An employee slipped while walking, fell against a wall, and then struck the floor. He suffered a broken hip and was hospitalized, requiring surgery.",1
"An employee was walking in the yard when they were struck by a forklift and knocked to the ground, resulting in a fractured right hip.",1
"An employee was helping lift a 90-pound metal bar. The bar dropped on the employee's fingertip, causing an amputation.",0
"A changeover was being performed on a pleater, and an employee was helping feed media into the machine's rollers. A roller pinched the employee's fingers resulting in amputation of a finger. The machine was not locked out at the time.",1
"An employee's finger was crushed by a door, resulting in amputation.",0
An employee was stung by a wasp.,1
An employee was operating a trim saw when his right ring finger became caught in the trim block's drive belt and pulley. The employee's right ring and middle fingertips were amputated.,0
"An employee was acting as a spotter for a loader, guiding it backward. When the loader's forks pulled out of the load, the release of tension caused them to bounce and kick up rocks. These rocks struck and fractured the employee's right ankle and lacerated the employee's face.",1
"An employee was helping to restring a liner in a splicer on a corrugator machine. The operator manually ran the head into the machine, breaking the employee's arm. The machine was not locked out at the time.",1
"An employee was digging a hole to plant a holly tree near the corner of a retaining wall. After the tree was set in place, he grabbed a branch to reorient it. The branch snapped; he fell off the edge of the wall onto a step landing about 4 feet below, then rolled down a few steps.",1
"An employee was welding aluminum brackets. The wires on the welding machine melted and a wire struck the employee's hand, shocking her.",1
An employee was helping to transport a large tank on a cart when the cart hit a bump and the tank fell. The employee sustained a fractured femur and facial lacerations.,1
An employee slipped and suffered a broken leg.,1
"An employee was exiting the cab of his truck when he missed a step and fell to the ground, resulting in a broken hip.",1
"An employee was trying to remove some tape on a conveyor belt's pulley. The belt pulled the employee's right little finger under the guard, causing the amputation of the fingertip.",0
"An employee was adjusting a wrench to tighten a bolt, part of repairs to a rail track. Another employee stepped on the wrench. The employee's right index finger was caught between the wrench and the bolt head, and the finger was amputated at the first knuckle.",0
"An employee was helping stack baking pans at a plant's loading dock. He fell backward off the dock, landing on the ground 3-4 feet below and suffering a head injury.",1
"An employee was removing a high-density polyethylene (HDPE) flange from a steel host pipe that had an HDPE liner installed. As the liner seal was broken, a puff of gas that was trapped in the annular space between the liner and steel pipe was released and ignited. The fire caused second degree burns to the employee's wrists and face.",1
"An employee followed two suspected shoplifters out of a store. There was an altercation, during which one of the people the employee followed elbowed her in the face. She lost consciousness and was hospitalized for head and face trauma.",1
"An employee came inside to warm himself next to a lit ladle (a drying process in an open flame pit), causing his shirt to catch fire. The employee sustained burns to his back.",1
"An employee was in a final assembly building, seated on a workbench chair with wheel casters, working on equipment wiring. The chair slid out from under the employee, who fell about 2 1/2 feet to the concrete floor and suffered a broken hip and right femur.",1
An employee was pumping hot water and switched the hose while the pump was still running. Hot water sprayed on the employee's legs and burned his legs and ankles.,1
"An employee was removing a grease cylinder from a skid steer track. The employee's right ring finger was caught between the track and an idler pulley, and the employee suffered an amputation at the first knuckle.",0
"An employee was working with a pedal-operated chop saw. As the employee leaned forward to adjust the work piece, the saw started and amputated his left middle fingertip.",0
"An employee was strapping down tarp while working from a catwalk over a rail car. When the employee reached over the catwalk railing to grab a strap, he fell approximately 10 feet to ground, resulting in a broken right forearm.",1
"An employee was loading containers from a ship onto a bomb cart. The employee's left index finger was caught between a twist lock and the frame of the bomb cart, resulting in a fingertip amputation.",0
"An employee was approaching paper rolls while a ""paster"" (paper splice) was being performed. He was pulled into the pinch point between the winder rolls and the paper rolls, resulting in broken ribs and a punctured lung.",1
An employee was clearing a jam when the unsorter activated and the employee became caught between the unsorter deck and a lumber pile. The employee sustained a broken sternum and ribs.,1
"An employee was cleaning saw dust from the exit end of an automatic, double-sided planer with a compressed air nozzle. The employee's hand was caught in the machine, resulting in severe lacerations and a degloving injury requiring surgery. The machine was not locked out/tagged out at the time.",1
An employee was adjusting a car lift arm underneath a car when a co-worker started to lift the car crushing the employee's hand between the car lift arm and the car.,1
"An employee had been welding on a jig/platform on the side of a mast. When the employee stepped off the jig and onto the platform, it tipped over and fell, pinning the employee to the ground. The employee suffered a collapsed lung, internal bleeding near the left kidney, and brain swelling.",1
"An employee was removing stretch wrap from a pallet of product on a loading dock. The employee fell off the dock to the concrete below, suffering a broken right hip.",1
"An employee was looking through sheets of precut decking in an upright position. The weight of the decking knocked him off balance and caused his feet to slip and hit standing decking on the opposite side. All of the decking fell and the employee was crushed, resulting in pelvis and hip fractures.",1
"An employee was repairing a leak on a cooling water line to a starch drying drum (the cooling water line is used to supply cooling water to a hot applicator roll). The employee had isolated the cooling water supply and cooling water return valves. When he loosened the compression fitting for the cooling water line, hot water came out of the line and burned the employee's arms, chest, neck, and face. While trying to get away from the hot water, the employee also injured his knee.",1
A service technician was operating the tire changing machine when the machine came down and crushed his left index finger on the rim. The finger was amputated at the first knuckle.,1
"An employee was assisting another employee with a winch on a truck when their finger became caught in the winch cable, resulting in an amputation to their right middle fingertip.",0
"An employee was repairing the fifth wheel on a tractor. The tractor shifted and crushed his left hand. He suffered three fractures, a dislocation, and cuts and bruises to the hand and was hospitalized, requiring surgery.",1
"An employee was checking a trailer during pre-trip for unloading equipment when they fell out of the trailer and hit the ground below, resulting in a fractured left ankle.",1
"An employee was removing a 6' x 6' cover from a log chipper using a hoist. The chipper disc contacted the cover which then dislodged from the hoist and struck the employee, resulting in lacerations to the head, neck and face and broken teeth.",1
"An employee was walking to answer the phone when she tripped over a box and fell to the floor. The employee was hospitalized with injuries to her left shoulder, left hip, and left knee.",1
An employee tripped over a pallet in an aisle. He fell and suffered a hip injury.,1
"An employee was walking at a worksite when they tripped and fell to the floor, resulting in a broken femur.",1
"On November 20, 2021, an employee was on an office building roof, cleaning a spray gun with mineral spirits. The gun activated and shot mineral spirits into his left palm. He was hospitalized.",1
"At about 10:15 p.m. on November 20, 2021, an employee was adjusting a belt when it was activated elsewhere. The belt moved; the belt and gear amputated the employee's right index fingertip at the first knuckle, as well as lacerating the employee's right middle finger. The employee was hospitalized, requiring surgery.",1
An employee was carrying out a meter test on the side of a pad-mounted transformer. An arc flash burned the employee's face and hands. The employee was hospitalized.,1
"A temporary employee was driving a utility terrain vehicle. He was caught between a concrete barrier and the vehicle, suffering a dislocated left shoulder and a broken left elbow. He was hospitalized and underwent surgery.",1
"An employee was standing near a pipe which was on top of wooden boards. A wooden board rolled off and the pipe struck the employee's left foot, resulting in four broken toes.",1
"An employee was clearing a blockage on an auger machine when their right hand and forearm were caught and pulled into the auger, resulting in a crushed hand and a compound fracture to the forearm.  The machine was not guarded at the time.",1
Two employees were engaged in a two-man jog on a line they were operating. One employee's thumb was caught between two rollers resulting in a degloving injury.,1
An employee was moving pallets. A pallet was dropped and crushed the employee's right thumb against a stacking machine. The thumb was broken.,1
"An employee was moving a refrigerator in a receiving department. He slipped on a piece of plastic and fell to the concrete floor, suffering a broken right femur. He was hospitalized.",1
"An employee was removing wooden concrete forms in a 120-foot-deep sewer drop shaft. The form at the 86-foot level shifted, causing the ladder the employee was on to fall to the ground below. The employee suffered multiple fractures to the legs and pelvis.",1
"On November 22, 2021, at approximately 1:55 PM, an employee was breaking concrete steps using a jackhammer when a piece of concrete gave way under the machine. The jackhammer and the employee were pushed forward due to the momentum. The employee's right ring fingertip was crushed, resulting in amputation.",0
"Two employees were putting two halves of a mold together using a crane. The mold failed to close on one side, then did close while an employee's right index finger was in the gap. The employee suffered a fingertip amputation.",0
"An employee was descending a 32-foot extension ladder from a gas station roof to retrieve a part. The bottom of the ladder kicked backward and slid, striking a concrete curb. The employee fell from the ladder approximately 12 feet to the ground below, resulting in three fractured vertebrae and a concussion.",1
"An employee was performing maintenance on an underground transformer when he contacted the transformer, resulting in electrical burns to his hands.",1
An employee was bitten by a coral snake when she opened a swimming pool skimmer lid.,1
"On November 22, 2021, an employee was tightening a bit in a milling chuck. The machine activated and amputated the employee's right ring finger above the last knuckle.",0
"An employee slipped and fell to the floor, suffering a back and tailbone injury.",1
"A temporary employee was stepping on a scrap plastic sheet/formed cup to flatten it out. The employee slipped on the sheet and fell to the concrete floor, suffering a broken left wrist.",1
"On November 22, 2021, at 7:15 AM, an employee was operating a ribbon mixer that was not discharging properly. The employee checked the discharge area and the mixer blades amputated their right middle fingertip and severely lacerated the right ring fingertip.",0
"An employee was welding clips while on a ladder. While descending the ladder, the employee lost balance, missed a rung, and jumped backward off the ladder. The employee sustained broken bones in his right ankle and left foot.",1
"An employee was collecting carts in the parking lot using a cart pusher. The employee then used a remote control to move the line of carts through the front entrance door and into the vestibule. As the employee neared the rows of carts that were already in the vestibule, he attempted to move a misaligned cart out of the way of the carts he was bringing in and became pinned between the carts that were already in the vestibule and the carts he was bringing into the store. The employee sustained two broken knees.",1
"Employees were decking the roof of a two-story building. One of them was walking to begin work after a break when he slipped and fell through a deck opening. He landed about 40 feet below on a concrete surface, suffering multiple limb and skull fractures. Fall protection was not worn at the time.",1
"An employee was trying to fix a malfunctioning garage door. The door came down while his hands were in its components, which severely lacerated his right index finger.",1
An employee was closing the rear door of a 22-ft. box truck when the truck began to drive away. The employee had one foot on the back of the truck and one foot on the dock; he fell from the dock to the pavement and sustained a head contusion.,1
"An employee was performing maintenance on a bag house compartment. During installment of the lock-out tag-out, the inlet poppet valve would not close remotely. The employee attempted to manually close the valve when it closed on his fingers, resulting in a partial amputation to his left index finger.",0
An employee was struck on the left foot by a pallet jack after dismounting it. The foot was broken.,1
"A bank employee was shot by a robber, resulting in a gunshot wound to the torso.",1
"An employee tripped while walking with two glass bottles, fell onto the bottles, and suffered a cut to the left wrist.",1
"An employee was drilling on the job site using a mobile drill rig welded to the back of a truck. The employee's clothing got caught in the auger on the mobile drill rig, pulling his right arm into the auger. The employee sustained lacerations to his right arm that required hospitalization.",1
An employee was cleaning a high-pressure paint gun. The gun activated and injected paint into the employee's palm.,1
An employee was climbing a 20-foot extension ladder when he lost footing and fell approximately 10 to 12 feet to the ground below. The employee sustained a broken right arm and a right leg injury.,1
Employees were landing a bundle of decking. The bundle spun around and caught an employee against a column. The employee suffered a liver laceration.,1
An employee fell while vacuuming. She landed on the floor and suffered a broken hip.,1
"An employee was unloading material from a box truck when he slipped and fell from the truck to the ground, resulting in a broken rib and a collapsed lung.",1
"An employee fell in a mop room, suffering a broken leg.",1
"An employee was working from a 3.1-foot-high platform, stabilizing a pallet. He fell from the platform to the ground, and his left foot was caught in the equipment during the fall. He suffered broken bones in the left leg and was hospitalized.",1
An employee was hospitalized after possible gas inhalation.,1
"An employee tripped and fell on the ground, suffering a broken and dislocated elbow. She was hospitalized, requiring surgery.",1
"An employee was trying to move a stopped conveyor belt. As the employee was reaching under the belt, it began to move, and the employee's right ring finger was pulled into the belt and pulley system. The employee's fingertip was amputated.",0
An employee was cleaning a machine when it caught his right ring finger and amputated the fingertip.,0
Employee 1 was standing and giving instruction to employee 2 when he possibly slipped or tripped from a slightly elevated level on a piece of equipment and fell to the ground. Employee 1 sustained fractured ribs and a partial lung collapse.,1
"An employee was unloading a delivery truck. He slipped inside the truck and twisted his ankle, breaking it. He was hospitalized.",1
"An employee was moving coils with a crane. When the crane set down a coil, its hook slipped out of the coil. The employee was pinned against another coil, suffered hip bruising, and was hospitalized.",1
"An employee was pushing a stocking cart when their knee gave out, resulting in a right knee strain.",1
An employee shut down a lint cleaner machine for cleaning. The employee opened the lint cleaner drum door and their left index finger contacted the still spinning drum resulting in a laceration. The finger was medically amputated.,1
"On November 23, 2021, an employee was on a ladder striking a moving conveyor roller when their right arm or the hammer was pulled into the conveyor resulting in fractures and lacerations. The employee was hospitalized.",1
"At 7:25 a.m. on November 23, 2021, an employee was removing a recoil spring from the overhead door on the side of a building. When the employee removed the center support bracket, the spring struck him in the right forearm, lacerating it. He was hospitalized.",1
An employee was cleaning the roller and ink ball on a press. The employee used a rag to wipe up the excess solution. The moving roller pulled in the rag and the employee's right hand pinching it between the roller and ink ball. The employee suffered severe lacerations to their ring finger and an amputation of their middle finger at the first knuckle.,1
One employee struck another on the back of the head with a baseball bat. The injured employee suffered brain swelling and was hospitalized.,1
"An employee was driving a truck-mounted forklift with a sheet rock load into a warehouse. The forklift fell forward, throwing the employee to the concrete floor. He suffered injuries to the shoulder, nose, and skull.",1
An employee was pushing a dumpster back into place after it was emptied. He twisted his left ankle.,1
"An employee was pressure washing a patio. While stepping down, the employee slipped on a rock and fell on a deck support post, resulting in an abdominal injury.",1
"An employee was using a rock drill on concrete. The drill bit broke, and the drill bounced off the ground and struck the employee's left foot, breaking it.",1
"An employee was cutting pork with a bandsaw. As he reached to grab a piece of meat, the saw amputated his left middle finger and lacerated his left index finger.",1
"An employee was using an extension ladder to access the air valves of a furnace. He fell from the ladder to the concrete floor 8 feet below, suffering a broken right arm, right elbow, and left wrist.",1
"A vehicle lift was lowered onto an employee's toe, breaking it.",1
"An employee was walking down the sidewalk when they tripped and fell, resulting in a right knee injury.",1
"An employee fell from a ladder to the ground, suffering two broken ribs and a punctured lung. The employee was hospitalized.",1
"An employee was walking on top of pallets on a dock. The employee fell from the pallets to the ground, suffering a broken left leg.",1
"An employee was using an over the road container (OTR). The employee brought the OTR to a mail dumper, which lifts packages on a conveyor belt. As the dumper was operating it contacted the door of the OTR, causing it to close on the employee's fingers. The employee's left middle and ring fingertips were amputated.",0
"An employee was cleaning with a pressure washer gun when the pressurized water contacted his foot and ankle, resulting in a laceration.",1
"An employee was accessing a roof using a wall ladder in a maintenance closet. He slipped and fell to the concrete floor, suffering two broken vertebrae in the lower back.",1
"An employee was attempting to unload a pallet of two tractor wheels with tires that was stood up on end and strapped to the front wall of the trailer. The employee released the strap that secured the pallet to the wall and lowered the wooden pallet to the ground while the tractor wheels remained leaning against the wall. When the employee was walking back to get on a forklift, one tractor wheel fell, struck the back of his calf, and pinned his foot under the tire. The employee sustained a deep contusion to the leg and foot injuries.",1
"An employee stepped out of a moving vehicle, fell, and struck his head. He was hospitalized.",1
"An employee was installing equipment on a cell tower. As the employee was untangling cables, a mounting bracket crushed the employee's left middle finger. The fingertip was medically amputated.",1
An employee was chipping concrete out of a bucket when a piece of concrete fell from the bucket and struck him. The employee incurred injuries to his upper body.,1
"An employee was installing a sprinkler drop from a 6-foot A-frame ladder on a scissor lift platform. The employee fell to the ground about 35 feet below, suffering fractures in the arms, legs, and pelvis. The employee was hospitalized.",1
"An employee was putting a pipe in place and pushing on a rotating sucker rod, which caught his glove and wrapped his arm around the rod. The employee sustained multiple arm fractures.",1
An employee was loading or unloading freight when they inhaled pesticide vapors after a container was damaged. The employee suffered a respiratory attack.,1
"An employee was painting the roof of a five-story building when they lost their footing and slipped off the edge of the roof. The employee's foot hit a window sill during the fall, resulting in a broken left ankle.",1
"An employee was disconnecting a hose from a storage tank when he was splashed with a 50% caustic acid solution. The employee sustained chemical burns to his left eye area, lips, under his chin, and his torso.",1
"Six employees were helping a large jet airplane back out of a hangar. The airplane's main tire ran over an employee's right foot, which was amputated.",1
"An employee was clearing a jam in a palletizer. The machine started up and pulled the employee's hand into a chain and sprocket, amputating four fingers.",0
"An employee was inserting a drain plug underneath a macerator machine. The drain plug slipped from the employee's hand, and the employee's middle finger went into the drain hole and contacted the spinning auger blade. The fingertip was amputated. The machine was not locked out at the time.",0
"An employee was climbing out of a refrigerated truck, missed a step, and fell to the ground. The employee sustained a hip fracture that required surgery and hospitalization.",1
"An employee was checking a single refrigeration unit because it was making a noise. The employee was descending a ladder when he slipped, fell, and hit his head on the concrete, resulting in a head injury and laceration.",1
An employee was clearing a product jam on the production line when their hand was struck by a cutting mechanism that trims product to size. The employee sustained amputations to their fingertips.,0
"An employee tripped and fell while carrying plates of food, landing on the tile floor and suffering a fractured disk in the lower back.",1
"An employee was transporting a tier of iron pipe. The tier rolled and crushed the employee's left little finger, resulting in a partial amputation.",0
An employee was unloading merchandise from his truck using a two-wheel dolly. He fell from the back of the truck and suffered a compound fracture to the right lower leg.,1
"An employee was carrying a seesaw down a stair ladder. The employee fell at the last step, landing on the floor and suffering a broken femur.",1
"An employee was walking in a shipping area. On the floor was a 68-inch piston rod to be boxed and shipped out. One end of the rod was propped up on a 5-inch tall box with a protruding piston nut installed on this raised end. Adjacent to the raised piston end was another box containing a part ready to be shipped. The employee stepped around this boxed part with her right foot and then, while attempting to step over the raised end of the 68-inch piston with her left foot, caught her left boot toe on the protruding nut, causing her to trip and fall to the ground. The employee sustained a fractured left humerus.",1
"An employee was climbing a stepladder to exit a 42-inch-deep trench. He slipped at the second step from the top, fell sideways, and landed on top of the wood concrete form. He suffered four broken ribs.",1
"An employee was on a ladder, repairing a hot water heater. On opening the control panel, the employee was burned by hot water that had leaked into the panel. The employee fell from the ladder to the floor 4 feet below, suffering a broken left ankle as well as second-degree burns to the chest.",1
"An employee was using a utility knife to cut into silicone joints. The knife slipped and lacerated/punctured the employee's inner left thigh. The employee was hospitalized, requiring surgery.",1
"An employee was walking back to his vehicle when he slipped and fell to the sidewalk landing on his back. The employee's back, shoulder, and neck were injured.",1
"An employee's finger became caught in a conveyor belt, resulting in a partial fingertip amputation.",0
"An employee was changing a propane tank in a forklift when propane sprayed on his right hand, resulting in burns to his middle, ring, and little fingers.",1
An employee was working with a grinder when his hand and finger were pulled in toward the grinder wheel. The employee's left index fingertip was amputated.,0
"An employee was holding a chain, believing it to be the railing of a widebody loader. The loader bed was raised, and the employee's left hand was caught. Part of the index finger was amputated.",0
"An employee was at a carving table, pouring high-proof liquor onto prime rib to ""flame"" it. The liquor bottle caught fire and exploded, lighting the carving table on fire. The employee suffered burns to the face, neck, and hands.",1
An employee was spinning a wheel in a vehicle service area. A finger on his right hand was caught and lacerated between the wheel and the vehicle's caliper.,1
An employee was removing an over-the-road container from conveyor equipment. The container broke the employee's left index finger.,1
"An employee was servicing a cable telecommunication line at a residential home. While servicing the receiver box on the outside of the home adjacent to an outdoor basement staircase, the employee tripped or lost footing and fell into the stairwell, resulting in fractured ribs.",1
"An employee was replacing bearings on a blow mold machine. The employee was putting bearings into place with a rubber mallet when the shaft slipped and fell on top of employee's right hand, resulting in partial amputation to their right index finger.",1
"A temporary employee was attempting to unclog cotton from a machine when his finger became caught in the machine, resulting in a fingertip amputation.",0
"The injured employee left the scrap yard and did not return. When other employees searched for the employee, they found him in a maintenance break room with a large bump on the back of his head. He was hospitalized with a fractured skull.",1
An employee was unjamming freight from a conveyor belt when they slipped and fell two feet into a chute. The employee was hospitalized.,1
An employee was using a rag that had cleaning solution on it to clean switch gears inside a factory. The employee's hand contacted an electrical part inside an energized section. The part shorted out and the employee's hand was burned.,1
"An employee working at a cash register turned to signal to a customer when they fell to the ground, resulting in a broken right hip.",1
A temporary employee was attempting to close the door of a trailer when they sustained a partial amputation of their left index finger.,0
An employee was operating a vinyl fencing notching machine and partially amputated their left index finger.,0
"An employee was pulling a pallet into a freezer when he slipped and hit his knee on the concrete floor, resulting in a fractured kneecap. The employee was hospitalized.",1
"An employee was operating a tugger when it spun out of control. She fell off, and her leg was caught between the tugger and a pallet. Her ankle was broken.",1
An employee was performing preventative maintenance in an air handling unit and sustained the amputation of two fingertips.,1
"While squeezing between a table and a structural column, an employee tripped on the base of the column and fell, landing on the carpeted concrete floor and suffering a broken right femur.",1
"An employee was reattaching an electrical wire that had been pulled free from a junction box. The employee contacted live electrical conductors and suffered an electric shock. The employee sustained a muscle injury, electrical burns, and sinus and heart injuries.",1
"An employee was changing a cleaner cone cap. The cone became pressurized with water, and the water stream pushed the employee into nearby equipment. The employee sustained a concussion; fractures to their skull and ribs; lacerations on their scalp, eyelid, and left thigh; and injuries to their pelvis and internal organs.",1
"An employee was exiting a trailer on a forklift. As he was dropping a pallet, he tried to stop the forklift and his left foot was crushed between a pole and the forklift. The employee sustained a fracture to his left foot.",1
"An employee was collecting garbage with an automated garbage truck. A hydraulic line ruptured and sprayed into the exhaust, igniting a fire. The employee sustained severe burns on her right arm, back, and face.",1
"An employee slipped in snow while delivering a package. She fell, suffering a broken arm and lacerated forehead. She was hospitalized.",1
"An employee was walking when she tripped over an ergonomic mat and fell, resulting in a broken left tibia.",1
An employee was insulating an overhead duct from a scissor lift when they tripped on the insulation and fell on the scissor lift platform. The employee was hospitalized with a right hip fracture.,1
"On November 28, 2021, an employee was taking products off a conveyor when his right arm was trapped in the moving conveyor belt. He suffered a friction burn to the skin of his forearm.",1
"An employee was removing a guy wire from a base beam, slipped on grating and fell onto a casing valve, resulting in eight fractured ribs and a spleen injury.",1
"An employee was cleaning the bay of a sweeper truck into a dumpster. He slipped and fell into the dumpster, injuring the ribs on his right side.",1
"An employee was hooking a steam line to the top of a rail car opening from a hydraulic lift. The employee fell approximately 12 feet to the gravel and concrete below, resulting in a pelvic fracture, bruised ribs, and a left arm laceration.",1
"An employee was testing a resin piston pump used in a laminator. While holding the pump with one hand, he attached the air line to engage it. The pump pinched his finger; then, as he tried to use his other hand to free the finger, that hand was pinched as well. He suffered a finger amputation.",0
"Two employees were each climbing 25-foot ladders spaced 20 feet apart while carrying a 20-pound piece of gutter between them. Employee 1 fell off the ladder to the ground below, landing on his back. He sustained back and rib fractures.",1
"An employee fell from a ladder while climbing down it. He landed on the concrete below, suffering broken ribs, a broken shoulder blade, and a partially collapsed lung.",1
"An employee was disassembling a temporary transmission structure. A conductor butterfly shoe broke as the employee removed it, which caused a polymer stand-off insulator to release and strike the employee in the face. The employee sustained a fractured jaw.",1
A climber was working in a tree. A tree limb broke beneath him while he was disconnected to reposition himself. He fell to the ground 30 feet below and fractured both femurs.,1
"An employee's glove became caught in a milling machine, pulling their hand into the machine. The employee's left middle and index fingers were amputated.",1
"An employee stopped to talk with a friend when they tripped and fell to the floor, resulting in a broken hip and arm.",1
"An employee was getting onto a roof through a hinged window. The window closed on his right ring finger, causing a partial amputation.",1
"On November 29, 2021, an employee was sitting at her computer when she developed tightness in her chest after smelling a diesel odor. The employee walked outside for fresh air but suffered respiratory distress due to asthma. The employee was hospitalized.",1
"An employee was operating a rivet machine. As the employee was removing a rivet stuck in the slot, the machine activated and smashed his left index finger. He suffered a partial amputation to the finger.",1
An employee was clearing a jam on a line and amputated their right index finger.,0
An employee was operating a saw and amputated their left ring finger at the nailbed.,0
An employee cleaning in the area of a conveyor was caught by the conveyor. The employee sustained a broken arm requiring hospitalization and surgery.,1
"A temporary employee was dismounting an electric pallet jack when his foot became caught between the pallet and the jack, resulting in a fractured ankle.",1
"An employee was preparing a trailer ramp door for repair. He disconnected the support cables inside the trailer so they could be adjusted (so that the door could open fully without them tangling). He then went outside the trailer and unlocked the bar locks holding the door closed. The door stayed closed until he pulled it down, at which point it fell on him and broke his back.",1
"An employee was walking around a concrete mixer truck when a water line above him failed. Hot water poured onto the employee, who suffered first- and second-degree burns to his right shoulder, the top right side of his back, the top of his right arm, and the back side of his right hand.",1
"An employee was fixing a forklift. His hand was caught and broken between the forklift jack and a piece of metal. He was hospitalized, requiring surgery.",1
"An employee reached through the mast of a forklift while scanning a bar code on a pallet. The mast was activated and lowered onto her arm, breaking it.",1
An employee was standing on the back of a tow truck. The employee fell to the concrete ground 4-6 inches below and sustained a broken femur.,1
"An employee was at a patient's residence when the patient's dog bit her right forearm, resulting in a laceration. The employee was hospitalized.",1
"An employee was working at a table line, setting wedges in a housing and inserting a table into a nose pusher. The employee's left index finger was caught in a nip point in the nose pusher. The fingertip was amputated.",0
An employee was pulling a sling out from under a bundle of stainless steel he had moved with a crane. A bundle fell on his ankle and fractured it. He was hospitalized.,1
"An employee was using a floor mounted pedestal grinder to resurface a steel wedge. During the process, the employee's hand contacted the surface of the spinning abrasive wheel, causing an avulsion injury to the tip of their right index finger. The employee's distal phalange was later amputated.",0
"An employee was unloading empty milk cases. When he closed the rear door on the box truck, his left index finger was crushed between the door panels resulting in an amputation.",0
"An employee was closing the door to a laundry machine and crushed a finger in the door, resulting in an amputation.",0
"An employee's hand contacted an outer line rigging sheave, resulting in an amputation of two fingertips on their left hand.",0
An employee was driving a powered pallet jack. His right foot was caught and broken between the pallet jack and a metal storage rack system upright.,1
"On November 29, 2021, at 11:53 AM, an employee turned around after placing an item in a dishwasher, lost his balance, and fell. His head struck the floor, knocking him unconscious.",1
"An employee was using a jib crane and lifting strap to unload a 1,744-pound coil from a coiler. The coil slipped as its weight was transferred from the coiler to the lifting strap. A sharp edge on the coil cut through the lifting strap. The coil fell about 18 inches onto the employee's right foot, partially amputating the big toe.",0
An employee turned on a wood lathe after inserting wood material into it. The material shattered. Flying pieces of it injured the employee's eye orbit and lacerated the employee's face.,1
"An employee was directing a concrete truck that was backing up to make a concrete pour. As the truck approached a concrete wall that was behind the employee, the employee's finger was crushed between the cement chute and the wall. The employee's right little finger was amputated.",0
"An employee suffered a seizure while valet parking a customer's vehicle in a parking garage. Due to the seizure, the employee lost control of the vehicle and struck a column. The employee sustained three fractured ribs on the right side, as well as injuries to their head and right wrist.",1
An employee was helping retrieve a load when a forklift ran over his foot and broke it.,1
An employee was using a manual electric saw when it amputated the tip of the employee's left index finger.,0
"An employee was working on a generator's carburetor. Fuel was spilled on the battery and ignited, resulting in burns to his hands and face.",1
"An employee was installing drywall inside a home, working from a wooden plank positioned across the top of a doorframe and a metal plank. The plank shifted and the worker fell to the plywood floor more than 10 feet below and struck his head resulting in a loss of consciousness and concussion. Fall protection was not worn at the time.",1
"An employee was operating a stand-up forklift with his arm outside of the compartment. The employee's left arm was pinched between his forklift and another forklift, resulting in a contusion.",1
"An employee was working on a trash truck packing blade. The blade was on a forklift when it slid off the forks and struck the employee's right lower leg, resulting in a compound fracture.",1
"On November 29, 2021, an employee was replacing a seal on a hose when anhydrous ammonia trapped in the hose was released. The employee sustained chemical burns to his arms, chest, and face.",1
"On November 30, 2021, an employee stepped out of the operator's cab of a bulldozer onto the dozer tracks. His jacket sleeve caught the control lever, causing the vehicle to move forward. He was caught between the tracks and suffered a broken lower right leg.",1
An employee was helping a resident down a flight of stairs. The employee stepped down one step; the resident reached for the employee to steady her gait. The employee lost her balance and fell down the flight of stairs to a landing. She suffered a back injury (with bruising but no broken bones) and was hospitalized.,1
"An employee was taking inventory when a rack that held panes of glass, approximately 100 pounds each, tipped over. The employee sustained head injuries and was hospitalized.",1
An employee was using an angle grinder to cut metal. The grinder kicked back and cut his neck.,1
"An employee was pulling a two-wheel hand cart, loaded with cases of beer, up a ramp. The ramp moved on the wet ground under it, causing the employee to fall. The cart and the cases struck the employee's right leg, causing a twisted/fractured right leg and ankle.",1
"An employee was reaching for a fill cap to cover the fill port to a propane tank. After the employee disconnected the hose from the propane truck he was filling, his glove or shirt caught the shut-off valve, which opened up the liquid line. Liquid propane splashed on the employee's stomach, resulting in a chemical burn.",1
"At about 9:00 p.m. on November 30, 2021, an employee slipped and fell on condensation in the back of a trailer. He suffered a dislocated left shoulder and was hospitalized.",1
"An employee was making a delivery to a customer when he exited the trailer and was struck by a passing car, resulting in a right leg fracture.",1
An employee became short of breath while loading her vehicle for deliveries. She collapsed to the ground.,1
"Two of an employee's fingers became caught in the lift gate of a delivery truck. The employee sustained cuts to both fingers, and his left index finger was partially amputated.",1
"An employee was stripping and removing concrete form work. The employee stepped up onto the concrete form work. The metal pole brace used to adjust the wall form was unattached at the top. The employee fell approximately 27 inches and the 12-foot metal pole struck them in the head, resulting in an orbital fracture near their right eye, a fractured nose, and a head laceration.",1
An employee was using a screwdriver to adjust a door's self-closing mechanism. The employee lost their grip on the screwdriver and their hand became caught in the door's threshold as the door closed. The employee's left index finger was crushed and partially amputated.,0
"An employee was hanging a temporary cutout to an underground primary wire. The employee contacted an energized primary line and was shocked, suffering severe burns to both hands.",1
"An employee was replacing a steam valve while working from an elevated plywood platform. The ratchet he was using slipped from the valve bolt, causing the employee to lose his balance and fall approximately 8 feet to floor below. The employee sustained a fractured right arm.",1
"A pallet of concrete cap blocks broke while being lifted. The cap blocks fell and injured an employee's lower right leg, causing swelling. The employee was hospitalized.",1
An employee was climbing a fixed ladder when he lost his grip and fell four feet to the steel platform below. The employee was hospitalized with a fractured shoulder and ribs and a bruised lung.,1
"An employee was cleaning a dishwasher with a lime descaler. While in the process of removing a macaroni and cheese from the oven, which is located approximately 4 feet from the dishwasher, the employee became light-headed and fell to the floor due to chemical exposure.",1
An employee was working on a rollercoaster. The employee was struck by a 300- to 400-pound wooden bolster (which was being lifted by a forklift) and suffered a broken right tibia and a broken nose.,1
An employee was drawing a 9-millimeter handgun from its holster. The weapon fired into the back of his calf.,1
"An employee was loading a dozer into a trailer when he fell off the dozer onto the trailer platform and then onto the ground, resulting in a laceration to his left elbow.",1
"An employee was repositioning a utility vehicle. The vehicle struck a bollard post; his left leg was caught between the vehicle and the post, suffering compound fractures.",1
"An employee was using a table saw to cut a piece of wood and contacted the saw blade, resulting in an amputation.",1
"An employee was harvesting meat using a knife when the knife contacted their face, resulting in a ruptured right eye.",1
An employee was loading a concrete precast pole base with a forklift when the pole rolled off the digger derrick truck and pushed the employee 4 feet off the truck.,1
"An employee was picking orders. A forklift knocked 11 pounds of material loose from a 16.6-foot overhead rack, and the material fell onto the employee. The employee suffered a scalp laceration and a broken left ankle.",1
"An employee was stacking rugs. They walked over to the time clock and tripped over a cutout in a floor slab where a pipe was being fixed, falling to the ground and resulting in a left hip injury.",1
"An employee was walking next to a utility task vehicle when the vehicle began climbing a berm and started to tip. The employee reached over to prevent the vehicle from tipping and was thrown into the air, resulting in a fractured right femur.",1
"An employee slipped on ice while walking into a freezer, fell, and suffered a broken leg.",1
A pelletizer machine had malfunctioned and been turned off. An employee was checking for a clog when the machine started up; its blade amputated the employee's right little fingertip.,0
An employee was bending steel rebar on a table turner. The employee's left little finger was caught and crushed between the rebar and the support pin. He underwent an amputation to the finger.,1
"An employee was standing at a jewelry counter. A customer shoved the employee while trying to steal diamond necklaces. The employee fell to the floor, suffered injuries that left them unable to stand, and was hospitalized.",1
"An employee was using a high-pressure washer and chemicals to clean when the pressure washer contacted their left index finger, resulting in an injury that required surgical amputation.",0
"An employee was cleaning a strainer on the water line leading to the sump pump when they fell into the sump pit containing approximately 180 degree water, resulting in burns to their foot and leg.",1
An employee suffered a muscle tear near the stomach while trying to lift a resident into bed.,1
"An employee was using a foam compressor. As she loaded the drawer, the tip of her left little finger was caught between the drawer and the base of the machine. She suffered an amputation to the fingertip.",0
"An employee was trying to remove a steam line that had been melting wax earlier in the day. The line released pressurized steam, which caused a second- or third-degree burn to the employee's left calf.",1
"An employee was climbing a ladder to the billboard platform when the ladder disconnected from the platform and the employee fell approximately 33 feet to the ground, resulting in broken bones.",1
"An employee fell from a ladder, landing on the floor and suffering a skull fracture and a brain bleed.",1
An employee was guiding a berm machine when the tip of their left ring finger was caught between a dump truck bed and the berm machine. The employee suffered a pinch injury that resulted in a partial amputation.,0
"An employee was moving a storage cart when a case of vinegar fell off the cart to the ground, breaking bottles of vinegar inside. Seeing the product was leaking, the employee picked up the case to dispose of it. As he was walking with the leaking case, he slipped in the vinegar and fell. He suffered a broken hip and was hospitalized.",1
"An employee was up a tree, trimming tree branches with a chainsaw. The chainsaw cut his lanyard and he fell to the ground about 18 feet below. He suffered fractured vertebrae in his lower back, as well as a punctured bowel, and was hospitalized.",1
"An employee had been raised on a forklift and was installing a hanging heater in a warehouse. As the employee was holding onto the forklift rail, the employee's hand was caught between the rail and a rafter. The employee suffered a fracture and torn ligaments in the index finger.",1
"An employee fell from a ladder while installing insulation. The employee landed on the ground, suffering a broken wrist and a dislocated hip.",1
"At a customer's facility, an employee was unloading totes from a truck. The totes weighed approximately 10-20 pounds. The employee was hospitalized with a heart attack.",1
"An employee was unstrapping I-beams on a trailer. He tripped over an I-beam and fell off the trailer. An I-beam then shifted off the trailer and landed on his legs, breaking both of them.",1
An employee was disassembling a control valve assembly. During control valve disassembly a metal cylinder was unexpectedly discharged under high pressure and struck the employee in the face. The employee sustained extensive damage to facial features including an eye injury and fractured jawbones. The employee was hospitalized.,1
"An employee was using a water excavation tool to drill a hole in level ground when the excavation pipe got caught on the lip of the hole being made. The pipe released from the lip and hit the employee, causing them to fall and suffer a broken arm.",1
An employee was climbing a fixed ladder. The employee fell about 9 feet to the concrete floor and suffered a right hip fracture and right leg fractures.,1
"An employee was performing maintenance on a truck when blocks holding the carriage assembly on a mast failed, causing the carriage to drop and crush the employee's right hand.",1
"An employee was operating a jig. The machine closed on the employee's left hand, amputating the middle finger.",0
"Three employees were unloading a reclining sofa from the back of a truck to the ground. One of them was trying to guide the process with a four-wheel hand truck. The hand truck rolled on uneven ground, and the employee's hand was caught between the bottom bracket of the sofa and the hand truck, resulting in the amputation of the end of the thumb.",0
"An employee was walking to his next job location when he slipped while stepping onto a 16-inch raised platform. The employee fell onto the concrete floor and landed on his left side, resulting in head lacerations and broken bones in his left arm.",1
"An employee was delivering packages to a residence when they ran from an unleashed dog and fell to the pavement, resulting in a fractured left knee.",1
"On 12/2/2021, at approximately 3:00 p.m., an employee was hanging Christmas lights on the gutter of the company building. He fell roughly 8 feet from the top of an extension ladder and sustained a concussion, six broken bones in his face, and required stitches along the left side of his face.",1
An employee was assembling a hydraulic cylinder in a plant's assembly area. The rod of the cylinder unexpectedly retracted into the tube and the employee's right-hand fingers were trapped in a pinch point between the cylinder tube and the piston rod. The employee's index fingertip was amputated.,0
"An employee was removing a wooden form attached to a cement wall. The form was connected to a crane and swung when it came loose, hitting the employee's left foot and resulting in a laceration and injury to two toes including a fracture that required surgery.",1
An employee had a running vehicle elevated on a vehicle lift and was sanding the vehicle's serpentine belt. The employee's right ring finger got caught in the running serpentine belt and a pulley and amputated.,0
"An employee was installing a DOT bumper for a truck that had been rear-ended the week prior. He used a pit jack to support the bumper. As he pulled the mounting bracket loose, it sprung forward and struck the employee in the face, resulting in fractures to the orbital socket, sinus cavity, and jaw bone, as well as the loss of at least one tooth.",1
"An employee was using a tire press to put a tire onto a wheel when the machine malfunctioned and clamped down on the employee's hand, resulting in broken fingers and a fractured wrist.",1
An employee's finger was caught in a closing door.,1
"An employee was feeding dough into the rollers of a machine when her hand contacted the machine, resulting in amputation to a finger.",0
"An employee was unloading freight from a semi-trailer. He missed a step getting off the trailer, fell, and hit his head, suffering a scalp laceration and dizziness. He was hospitalized.",1
"An employee was replacing a cylinder and shut off the pneumatic pressure and removed the hose to the solenoid to ensure no air was in the system. While taking the top nut off the solenoid bracket, the cant pickup became unstuck and dropped down, catching his arm between the cant pickup and a support beam. The employee suffered a broken right arm.",1
"An employee was leaving a patient's residence when she fell down the stairs inside the building, resulting in a left hip fracture.",1
"An employee was in a box trailer. The employee stepped aside to allow someone to pass, tripped on the wire connecting the trailer ramp/door to the trailer, and fell backward off the trailer, landing on the ground and suffering a broken left ankle.",1
"An employee attempted to clear a jam in a hamburger patty machine when the stamping mechanism of the machine cut the tip of his left middle finger, resulting in a fingertip amputation. That machine was guarded and in operation at the time of the incident.",0
An employee was using sandpaper to sand a mandrel on a re-cutter. The sandpaper snagged on the mandrel and pulled the employee's gloved right hand into the machine. The hand was amputated and the skin was torn off up to the elbow.,1
An employee was dumping product in a vat when a hose with hot water separated from the vat and hot water burned the employee's legs.,1
"An employee was cleaning gutters on the roof of a building. While climbing off the roof using a ladder, the ladder slipped and fell. The employee's feet got tangled between two rungs during the fall to the wood deck approximately 12 feet below. The employee landed on his back and side. The employee's pelvis was shattered.",1
Two employees were performing sand blasting while on a mobile scaffold when the scaffold fell over and the employees fell approximately 8 feet to the ground. One employee was hospitalized for back injuries.,1
"An employee was filling a nurse tank with stabilizer after it had been filled with anhydrous ammonia. The nurse tank was over pressurized causing the relief valve to activate and release the ammonia. The employee suffered chemical burns to the right eye, face, neck, and arm.",1
"An employee opened the hatch of a meat processing machine for maintenance to remove product from underneath the machine. The hatch bumped and smashed the employee's left ring fingertip between the machine and the hatch, resulting in an amputation to the tip of the nail.",0
"An employee was moving plywood sheets. When they attempted to move the rearmost plywood sheet, the front plywood sheets fell and struck the employee, resulting in a broken hip.",1
"An employee was delivering a load of product to a customer using a semi-truck equipped with a lifting device. They fell from the tire of the truck resulting in hospitalization due to injuries including a dislocated right shoulder, torn ligament in the left wrist, and fractured big left toe.",1
"An employee felled a tree. The tree hit the ground downhill from the employee and a piece of the tree broke off and flew uphill, striking the employee and resulting in an injury that required hospitalization.",1
"An employee was driving a stand-up lift truck through a warehouse area. As she maneuvered the vehicle to pick up a pallet of product, her arm struck a storage rack and was broken.",1
"An employee slipped while delivering mail, fell to the floor, and suffered a broken left hip.",1
An employee was watering a concrete area to reduce silica dust while concrete was being cut with a chop saw. The saw kicked back and lacerated the top of his right hand.,1
"An employee was working on a tire. While being filled with air, it ruptured from the wheel assembly and deeply lacerated the employee's left hand. He was hospitalized, requiring surgery.",1
"An employee was using a hydraulic torque wrench to remove the nuts on a high-pressure frac pump. While removing the last few nuts, the employee placed his hand on the wrench to ensure it did not fall when his other hand contacted the device and it engaged, causing it to rotate and crush the employee's thumb, resulting in a fingertip amputation.",1
"An employee was moving an auto-baler onto skates. The baler tipped over and fell onto the employee, who suffered four broken ribs; lacerations to the back, right side, and face; a head contusion; and a torn shoulder ligament.",1
An employee was operating a brake press and amputated her right thumb at the first joint.,1
"An employee was working as a spotter near a skid steer. At about 3:00 p.m., he approached the skid steer to speak with the operator, then turned to walk away. The skid steer then drove forward about 12 inches and caught the employee's left boot. The employee suffered fractures to the left tibia and fibula.",1
"An employee was operating a boom truck. His glove was caught in a pinch point while his hand was on the outer extension of the stabilizer, and his little fingertip was amputated.",0
"An employee was kneeling next to a piece of equipment, having just finished a belt replacement on it. He grasped the belt with his right hand for help standing up, and the belt rotated. His thumb was pinned between the belt and the pulley and was amputated at the first joint.",0
"An employee was ""papering"" lumber rolls while the lumber was on conveyor belts, being guided to a forklift receiving area. The guide rails on the conveyor belt caught the employee's finger, causing the amputation of the fingertip.",0
"An employee was on a roof applying shingles. The employee fell from the roof, suffering a head laceration and a broken leg.",1
"An employee was attempting to close the belly cargo door at the rear of a plane. He fell 9 feet from the belt loader to the concrete ground below, resulting in a back injury.",1
"An employee was descending a ladder when they slipped and fell to the ground, resulting in contusions to the collarbone, head, and fingers.",1
"An employee rigging a marble slab for transport attached a clamp to the top of the slab when the slab fell onto their right leg, resulting in a fracture.",1
"An employee was loading a tractor trailer using a standup/ride on powered industrial truck (PIT). While the employee was exiting a tractor trailer, the dock plate inadvertently raised and the PIT  struck the dock plate. The employee's left leg was pinned between the dock plate and the PIT, resulting in leg contusions.",1
"An employee was inspecting automotive parts and stacking them onto a pallet when the pallet and parts fell onto the employee's left leg, resulting in a broken lower leg.",1
"An employee was preforming a boring operation on an aircraft part. Following a machine setup procedure, the employee initiated the milling cycle and simultaneously identified a cylinder-shaped calibration tool left in the boring axis. The employee was attempting to prevent the spinning drill bit from coming in contact with the calibration tool when his left middle finger became caught between the spinning parts, resulting in a laceration that required hospitalization and surgery.",1
"The employee was doing his prehaul checks on a tanker-trailer load that was 70 percent sulfuric acid. He went to hook up the tanker to the trailer. He removed the end cap of the trailer to check that it was not leaking. Sulfuric acid sprayed onto his body from a leaking valve, causing chemical burns to his right arm, his eyes, the top of his stomach, and his back.",1
"An employee was using an overhead crane to move a 48-inch by 3-inch plate from a horizontal position to a vertical position. He had one hand on the controller and one on the clevis. When the employee let the clevis down to reposition it, his left index fingertip was pinched between the crane hook and the clevis, resulting in an amputation.",0
"An employee was assisting a patient when the walker they were using slipped, causing the employee to fall to the floor. The employee sustained injuries to their left shoulder, elbow, and knee.",1
"An employee was looking at a repair to a roller line. The employee's left hand was on a nearby conveyor belt when a box on the conveyor reached a photo eye. The belt started, and the employee's left hand was caught and crushed between it and a roller.",1
"An employee was using a dolly to move a portable light tower. The light tower struck the employee on the bridge of the nose, causing a laceration.",1
"At 9:30 p.m. on December 3, 2021, an employee fell while walking out of a clean room, landing on the floor and suffering a broken hip. The employee was hospitalized, undergoing hip surgery.",1
"An employee was guiding a truck with a trailer into a garage. As the truck was backing up, the employee was pinned between a telehandler and the trailer. The employee suffered multiple fractures on both sides of the pelvis, as well as a ruptured bowel and bladder.",1
"An employee was installing clips for acoustic panels on a scaffold. As he turned left to take a measurement for the clips, he lost his footing and fell to the floor about 45 inches below, landing on his left side. He suffered a laceration and fracture to the left side of his jaw, fractures to the left arm above the wrist and below the elbow, and a fractured right arm.",1
"Employees were cleaning up the area around an 8-foot retaining wall. An employee was at the top of the wall, receiving trash as it was handed up from below. The employee fell while reaching over the edge, landed on the ground, and suffered a slipped disk.",1
An employee was cutting aluminum trim with a miter saw and amputated his left index fingertip.,0
"An employee was trying to unfasten a power utility pole secured to a ride-on digger derrick. In order to loosen the ratchet strap that secured the easement machine, he placed his right hand on the ratchet mechanism and his left hand on the metal pole rack. While he was pushing away from his body with his right hand to loosen the strap, the pole came free from the strap, shifted, and caught the employee's left hand against the pole rack. The employee's index finger was amputated from the nailbed to the tip.",1
"On December 3, 2021, at the unloading dock, an employee was using a forklift to unload boxes from a trailer onto a pallet. As he was backing out of the truck's trailer and dock plate, the employee's left leg hit the dock's guardrails, resulting in a fractured fibula and tibia that required hospitalization.",1
"An employee was blasting a piece of equipment in preparation for maintenance. The nozzle blasted his inner left thigh with air and abrasive medium, causing a laceration.",1
An employee was working with seafood when a fish fin cut her finger. The cut became infected and her arm began to swell after her shift. She was hospitalized.,1
An employee was performing maintenance work on a conveyor. The conveyor belt amputated his left middle and index fingertips.,0
"An employee was using a forklift to apply bricks and holding the wheel when his hand was caught between the forklift mast and the wheel, resulting in an amputation to the tip of his middle finger.",0
"An employee was moving material down an escalator using a lift and winch. The lift kept moving past the safety stop and struck the employee's leg, breaking the tibia.",1
"An employee was trying to guide a shaft (on a hoist) into the primary arms on a laminator. The clamps on the laminator were activated and closed on the employee's right ring finger, causing an amputation to the fingertip.",0
"An employee was working at her station scraping a molding tray when she dropped the scraper into a conveyor. When she attempted to retrieve the scraper, her right hand became caught in the conveyor belt, resulting in lacerations and fractures.",1
"An employee was walking alongside a fork truck that was carrying a stone bench on a broken pallet. The bench toppled off the pallet and landed on the employee's foot, breaking bones.",1
"An employee was retrieving a pad blocker to protect himself when a student grabbed his hand and bit his left thumb, resulting in amputation of the thumb tip.",0
"An employee was teaching another employee how to replace a cable that ran a shooting target back and forth. The old cable, concealed in the rubber that the employee was standing on, caught his ankle and caused him to trip and fall to the floor. He suffered a fractured kneecap.",1
"An employee was on a pallet jack picking product. He stepped off the pallet jack, which continued moving and struck the back of his left foot. He suffered a cut tendon in the foot.",1
"An employee was closing sliding glass doors at an entrance. The doors closed on her left index finger, causing an amputation with a fracture to the last joint.",0
"An employee was disconnecting a hose from the bottom of a tank. When the hose disconnected, hot wax sprayed on the employee's face and neck, causing serious burns.",1
"An employee was assisting the medical team with a combative patient when the patient attacked the employee. The employee fell to the floor, hitting his head on a cabinet and the floor. The patient then tried to strangle the employee, and he lost consciousness for approximately 30 minutes. The employee sustained a concussion, traumatic subarachnoid hemorrhage, traumatic pneumocephalus, and traumatic subdural hematoma.",1
"An employee was pulling a pan of bacon out of an oven when bacon grease spilled causing second degree burns to the employee's hand, fingers and abdomen.",1
"An employee was cleaning glass from under a conveyor belt using a broom. Her left arm was caught and pulled into the conveyor roller, where it was trapped. The arm was broken, as was a finger on her left hand.",1
"An employee was operating a jack when they were pinned between the jack and a trailer wall, resulting in a right ankle injury.",1
An employee was lifting a box of costumes when they suffered a hernia.,1
"An employee was returning from lunch through a back door. The wind blew the door shut against the employee's right hand, pinching her fingers between the door and the door frame. The employee's right ring fingertip was broken and her right middle fingertip was amputated.",0
An employee was swapping propane on a forklift when another forklift backed out of a trailer into him. He was pinched between the two forklifts and suffered a broken pelvis.,1
"An employee was performing plumbing work and fell from the roof of a building. The employee landed on the ground and suffered fractures to their arms, legs, and back.",1
"An employee was driving a forklift in the warehouse when he punctured a tote of caustic. As he was cleaning up the spill, he slipped and fell into the caustic and it burned his legs and ankles. The employee was hospitalized. Another employee was using a bucket to help clean up the caustic spill; when he set the bucket down, caustic entered his right eye. The second employee was not hospitalized.",1
"An employee was climbing a 28-foot ladder to access a roof for exhaust hood cleaning when he fell, resulting in a fractured femur and hip.",1
An employee was walking toward the exit of a building when she fell to the floor and suffered a broken hip.,1
"An employee performing landscaping activities was getting material off the floor when his left hand got caught in a pinch point on the loader, resulting in crushing injuries to three fingers.",1
"An employee was checking the regrind material level in a machine's regrinding bin. Noticing that the level was high, the employee opened the bin door and saw some handle slugs on top of the material. The employee, believing there was a clog, reached through the bin and into the blender's throat. The low-level sensor became uncovered, causing the slide gate of the blender to close and catch the end of the employee's right middle finger. The employee suffered a fingertip amputation.",0
"An employee was walking around a pallet when their foot became caught on a bollard, causing him to fall to the cement floor. The employee sustained a right hip facture.",1
"An employee was pushing carts when a customer vehicle backed into him. He suffered a broken left foot and was hospitalized, requiring surgery.",1
"An employee's right hand was caught in the knuckle chain conveyor, resulting in a fingertip amputation.",0
"An employee was working on a 6-foot ladder to install a piece of angle metal on a duct. The screw he was using to attach the angle piece jammed and his weight shifted, causing the ladder to slide out from under him. The employee fell to the ground, resulting in a broken pelvis.",1
"On 12/6/21 at 8:07 p.m., an employee was walking to a supervisor's office when he fell to the floor after being attacked by a co-worker and two other people, resulting in a possible head injury.",1
"Employees were installing a grate under a generator. An employee lost his grip on the grate and it grabbed his glove. His finger was pulled into the grate, which amputated the fingertip.",0
An employee was guiding an overhead chain hoist that was moving a sifter. The equipment detached from the hoist. The chain bounced off the equipment and struck the employee's hardhat resulting in head trauma.,1
"An employee was attempting to cover debris that was loaded onto a truck with a tarp when they turned, slipped, and fell from the truck to the ground. The employee sustained a broken left tibia.",1
An employee slipped on a recently mopped floor and suffered two fractures in their right ankle.,1
"Two employees were picking up 74-pound boxes of porcelain tile and stacking them onto a pallet. The stack (of about nine boxes) tipped over and struck one employee's left leg and ankle area, breaking the ankle.",1
"A construction employee was struck by a sedan that entered the work zone, resulting in a broken wrist and ankle.",1
"On December 6, 2021, an employee was repairing a compactor hydraulic cylinder ram by putting in clevis pins to push the compactor plate and align the bolts and holes. The employee's left middle finger was pinched between the hydraulic ram and the pushing plate, resulting in a fingertip amputation.",0
An employee was moving echocardiographic machines in a storage alcove. His foot tangled in the machines' cords as he was turning to leave. He fell and broke his right hip.,1
"An employee was on a ladder, dismantling the track of an amusement park ride. A brace, being lifted by a crane, swung toward him and broke his right arm.",1
"An employee was on the roof using a circular saw to cut lumber. The employee placed their right hand under the lumber to hold it and the circular saw contacted their index finger, resulting in amputation.",0
"An employee was using a transport to move a ship component alongside a vessel. The employee was controlling the transport with a hand-held control, walking backward, watching the transport to make sure it had enough room to get by. At the same time, another employee was clearing gang boxes and material out of the transport's way using a forklift. After backing up with a load, the forklift began to move forward, and its back left tire struck the transport operator's right leg. The transport operator suffered a shattered tibia.",1
"An employee was transferring rigging from the strawline to the wire board during a line pull on a 345kV transmission line. A wire grip kicked and the rigging fell and struck the employee, resulting in multiple fractures and internal injuries. The employee was hospitalized.",1
"An employee was installing solar panels on a roof. The employee slipped and fell from the roof to the ground, suffering multiple broken bones.",1
"An employee slipped and fell off a roof, landing on the ground and suffering broken bones, a head injury, and broken ribs.",1
"On December 7, 2021, an employee was holding a piece of equipment while climbing a permanently mounted ladder on the side of a tower structure at a height of about 30 feet. The employee fell from the ladder to the ground and fractured bones.",1
"An employee was loading products onto an empty trailer from an elevated dock using a standup forklift. As the employee was backing out of the trailer and heading back toward the dock, the trailer shifted away from the dock approximately six feet. The lift fell from the back of the trailer and became stuck between the dock and the trailer and was left suspended. The employee was struck against the dock plate as a result of the fall resulting is severe damage to the head, spine, trachea, and back and paralysis.",1
"An employee was transferring gas from a gas tank he was replacing on a vehicle and putting it into a gas can. The windbreaker the employee was wearing caused a spark due to static electricity, igniting the gas vapors and causing a flash fire. The employee suffered burns to his face and the top of his left hand.",1
"An employee was attempting to clock out after her shift when she tripped over a runner rug and fell, resulting in a broken right arm.",1
"On December 7, 2021, a crane operator was tasked with relocating four lifting pad eyes from a pallet on the floor. The handling gear to be used was located on a handling gear rack. As the crane was hoisting a set of hook chains from the rack, the handling gear rack fell over onto a nearby employee, resulting in a fractured left femur.",1
"An employee walked to the truck dock to access the back of his freight truck when his foot caught the edge of a pallet with a battery on it, causing him to trip and fall across the battery on the pallet. The employee suffered five broken ribs.",1
"An employee was repairing an HVAC unit when they fell from a fixed ladder to the ground below, resulting in a fractured left wrist.",1
"On December 7, 2021, at 3:25 p.m., an employee was trying to move and align a steel beam into the correct position. A headache ball from a crane onsite was moved into position in order to knock the beam into place. The employee's hand got caught between the beam and the headache ball, resulting in a finger amputation.",0
"An employee was standing next to an auger, which was attached to a tractor drilling a hole. The auger bit caught the employee's coat sleeve and amputated his right arm.",1
"An employee was cleaning a drip edge machine when his hand got caught in the machine, resulting in amputation of the middle and ring fingers. The machine was not locked out at the time of the incident.",1
"An employee was unjamming a leg cell machine when her right index finger became caught in the machine, resulting in a fingertip amputation. The machine was not locked out at the time of the incident.",0
"On 12/07/2021 at 3:52 p.m., an employee was performing electrical line construction work when an electrical arc flash occurred, resulting in second degree burns to their face and neck.",1
A bay door was lowered onto an employee's hand where it rested on a track. The employee's fingertip was amputated.,0
"An employee was at a patient's home providing care when she fell off the patient's porch, resulting in a broken left leg.",1
"An employee was trying to resolve an altercation between two patients when a patient hit him and injured his left eye, resulting in eye surgery.",1
"An employee was using a cutting torch to burn a bearing off of a crusher roller when hot grease blew back onto the employee, resulting in burns to his face.",1
"An employee was loading her vehicle when she slipped and fell onto her back and right shoulder, resulting in injuries requiring hip surgery.",1
"An employee was delivering a mattress to a residential location when they slipped on a step, resulting in a twisted ankle.",1
"An employee was troubleshooting a fly knife on an extruder machine when their right thumb was caught by the fly knife, resulting in a partial amputation.",1
"An employee was raising the slings on an overhead crane. The hook from a sling caught the side of a table and tipped it over. The table struck the employee's right eye, injuring the orbital bone.",1
"At 7:15 p.m., an employee was shot seven times by an individual armed with a pistol, resulting in hospitalization due to gunshot wounds to the torso and leg.",1
"An employee locked out a machine that stretches bread dough in order to replace the chain. After replacing the chain, the employee removed the lockout tag and was watching the chain cycle through. The employee leaned up against the equipment frame when his left hand slipped and went into the chain and sprocket, resulting in an amputation of the index finger.",0
"An employee was installing a line hose when a flash occurred, resulting in electrical burns.",1
"On December 7, 2021, an employee was washing the surface of bricks from a scaffold. The employee was moving wood planks from one elevation to a lower elevation and fell approximately 14 feet from the scaffold to the ground. The employee sustained a fractured wrist and ribs and was hospitalized.",1
An employee suffered an amputation caused by a saw.,1
"An employee fell off a ladder while releasing a clevis on an electrical panel box, which subsequently fell on top of the employee, resulting in a compound fracture of the left ankle.",1
An employee was climbing down a maintenance stand to reposition the stand's foot-activated wheel lock. The employee reached down with their left hand to pull up the wheel lock; the lock disengaged and crushed the employee's index finger between the mechanical brake mechanism and the limit setting bolt.,1
"An employee was in the process of dropping a 10-millimeter wire cable spooled up in a wind turbine's nacelle and lowering it approximately 300 feet down the turbine's tower. There are four total cables to be dropped down, each weighing 90 pounds. As the technician was lowering one of the cables, it became tangled. Trying to untangle the cable, the technician's hand and wrist got caught in the wire cable, resulting in a broken wrist and torn skin around the wrist and hand.",1
"An employee tripped while walking into a kitchen and fell to the floor, suffering a broken knee.",1
A temporary employee was straightening a part in a hydraulic press. The press was activated and the employee's left middle and ring fingers were amputated at the first knuckle.,0
"An employee was moving a large tacked plate. The rig broke loose, fell, and hit both the employee's middle fingers, resulting in fingertip amputations on both fingers.",1
"An employee was removing a bucket cylinder from a backhoe. As the employee removed a pin, the cylinder link fell and struck the employee's right ring finger, causing a partial amputation to the fingertip.",0
An employee was using a knife to remove plastic from a block of cheese and lacerated his middle finger.,1
"On December 7, 2021, at 10:45 a.m., an employee was using a walking roll-jack to move a paper roll from the staging area to the production line when the employee's left foot was crushed between the roll-jack and an I-beam, resulting in broken bones that required hospitalization.",1
"An employee was operating a 3-point roller forming metal blanks when their left hand was caught in a pinch point, resulting in amputation to two fingers.",0
"An employee was walking between a tractor trailer and the dock it was backing into when the employee was struck and pinned between the trailer and the dock, resulting in a broken pelvis.",1
"At about 11:10 a.m. on December 7, 2021, an employee was working from a manlift to install x-bracing. Once the rod was in place, the employee prepared to move the manlift; the rod popped out and hit his right thumb, causing a partial amputation to the tip.",0
"An employee was clearing a jam in a conveyor system when their left little finger became caught in a conveyor roller, resulting in a fingertip amputation.",0
"An employee was stepping off an A-frame ladder when she tripped on a 4x4 piece of wood and fell to the floor, resulting in a radial fracture of the right wrist.",1
An employee was trying put a lift chain back on track on a forklift. The employee's left thumb was caught between the lift chain and the pulley and partially amputated.,0
"An employee was using an air gun to blow out a pump. The pump was turned on, and its drive gears amputated the employee's right index fingertip.",0
"An employee was standing on a milk crate scanning products when they fell and hit a cart, resulting in a punctured lung and fractured ribs.",1
An employee was placing a covering on the discharge duct of a sugar hopper. The employee's fingers contacted the motor blades in the sugar feeder valve and the employee's right index and middle fingertips were amputated.,0
"An employee was operating a standup forklift when the forklift struck a racking cross member and the employee was pinned between the cross member and the forklift, resulting in a possible fractured pelvis.",1
"An employee was repositioning a scaffold form system to the next highest bracket on the elevator and stairway core. The scaffold system shifted and inverted while it was being hoisted by the crane. The employee fell 65 feet to the ground below. He suffered a broken leg, a pelvic injury, back injuries, wrist damage, and possible brain bleeding.",1
An oil derrick operator was reaching out to remove slack in a cable. His right hand was caught between the cable and the rod elevator as the rig operator came down with the blocks. His ring finger was crushed and his middle finger was amputated.,0
"On December 7, 2021, an employee was feeding a straight line rip saw when lumber kicked back and struck the employee in the abdomen area.",1
Four employees were on a warehouse roof replacing the metal sheets. An employee stepped on a piece of insulation that was not covered by the roof and fell about 30 feet to the concrete floor. The employee suffered cervical fractures and head trauma and was hospitalized.,1
"An employee was removing drill rods from a drill rig truck when the 300-pound drill rod fell down and hit his left foot, resulting in a partial amputation of the big toe.",1
"An employee was working on a cantilever automatic roller gate. The roller and chain at the bottom of the gate caught the employee's right hand, causing amputations to the ring and little fingers.",0
"An employee was transitioning from a portable ladder to the catwalk of a billboard 20 feet above the ground when the employee fell to the ground, resulting in a fractured spine.",1
An employee was operating the thermal press and caught his finger in the unwind gear of the roller resulting in a fingertip amputation.,0
"An employee was using an aspirator when yarn came loose, wrapped around a rotating roller, and then wrapped around the employee's left ring finger, resulting in a partial amputation.",0
"On December 7, 2021, at 5:15 p.m., an employee's right middle finger became pinched between the dump box of his truck and a toolbox, resulting in the surgical amputation of the fingertip.",1
"On December 8, 2021, an employee was leaving a worksite when they slipped on an icy sidewalk and fell, resulting in a wrist fracture.",1
"An employee was preparing rods to be guided in a machine. The rods fell on his foot, resulting in an amputation.",1
"An employee was using a pneumatic torque wrench to rotate a bearing bolt on a bucket truck when the wrench slipped and the employee's finger was caught between the lever and a steel pedestal, resulting in a fingertip amputation.",0
"An employee was operating a glazing machine when he dropped a piece of cardboard onto the floor. As the employee bent to pick it up, his hand was caught in the chain and sprocket on the machine and lacerated. The machine was not guarded at the time.",1
"A trailer bay door closed on an employee's left index finger and broke it. The employee was hospitalized, requiring surgery.",1
"On December 8, 2021, an employee was placing turkey drumsticks into the rotary drum debone machine. The drumstick in his left hand fell off of the die and as he reached in to retrieve it, the circular blade cut his left ring finger. The finger was later surgically amputated at the hospital.",0
"An employee was attempting to thaw stuck controls with a propane torch to move equipment. The equipment slipped into reverse and pushed the employee back against a roller, pinning him and resulting in a fractured fibula.",1
"An employee was operating a power rotary machine. The employee's glove was pulled into the die, which caused an amputation to the employee's fingertip.",0
An employee was operating a table saw and amputated a finger.,1
"An employee slipped and fell on ice in the parking lot, resulting in a broken hip.",1
"An employee was putting a chain back on a forklift mast pulley when the chain became taut and crushed his left hand between the pulley and the chain. The employee suffered smashed and lacerated fingers, resulting in amputations of the middle and ring fingers as well as a skin graft to the little finger.",1
"An employee was conducting a battery exchange for a forklift when a powered pallet jack moved backward and pinned his left leg between another battery changer that was not in operation, resulting in a lower leg fracture.",1
An employee was applying drywall taping compound to a drywall corner. The employee was electrically shocked from an electrical panel and sustained burns to the right hand and arm.,1
"An employee was walking backward while using a dolly to bring in a basket from outside. Once inside, the employee backed into a metal spreader bar and fell, hitting his head and resulting in a concussion.",1
"On December 8, 2021, at 10:50 a.m., an employee was in the back of a truck traveling on a dirt road when they fell out of the truck, resulting in an injury to the back of their head.",1
"An employee was cleaning a restroom. While opening a stall door, she fell to the floor and broke a hip.",1
"An employee was picking an order on the ground. He had just turned to talk to the operator of a forklift when the forklift ran over his foot. He was hospitalized, requiring surgery.",1
An employee was feeding material into a pedal-operated press brake. The press caught his fingers and amputated his left index fingertip and right thumb tip.,0
"An employee was participating in an exercise session at a regularly scheduled safety seminar for employees when he fell down, suffering a knee injury that required surgery.",1
"An employee was getting up from a break room table. The employee's leg got caught on the leg of the chair and they fell to the floor, suffering a broken right hip.",1
"An employee was checking for an oil leak under a truck. The truck began to back up into a bay, and its wheel partially ran over the employee before it stopped. The employee suffered a broken pelvis.",1
An employee suffered a heart attack and fell down while tendering out packages.,1
"An employee was walking down a flight of stairs in the parking lot. She tripped, fell, and suffered a broken left leg. She was hospitalized, requiring surgery.",1
The injured employee was cleaning the assembly bench workstation at the end of his shift. Another employee used an 8-inch metal scribe to stab the injured employee on the side of the head by the ear.,1
"An employee was operating a directional drill with handheld controls when they got caught between the drill and a truck, resulting in a fractured pelvis, back, and ribs.",1
"An employee was getting a bucket of water off a scaffold. He jumped off the scaffold, striking his right heel against the ground and fracturing it.",1
"An employee was cleaning chips from a saw. When she stepped down from the platform onto the ground, she suffered a dislocated right knee.",1
"A skid loader was dispersing rock for underlayment. The skid loader backed up and struck an employee, running onto their left leg and resulting in a broken lower leg.",1
"An employee was standing on top of a wall placing a tarp onto a pile of mulch when the tarp ripped and threw the worker off balance. The employee fell approximately 6 to 7 feet off the wall, resulting in a broken rib and a possible fractured hip.",1
An employee was standing near a truck. Another truck struck the first truck's door and smashed it closed. The employee suffered a broken leg and was hospitalized.,1
"An employee was about to check a leaking boiler plug when it blew out, causing the employee to be sprayed with hot water. The employee sustained burns on his neck, ears, arms, shoulders, and abdomen.",1
"A maintenance employee opened up a tunnel freezer and shut off its fans to prepare for maintenance. The fans were turned on while the employee was performing maintenance and the fan blades contacted the employee, resulting in cuts to their right arm, hand, and fingers that required hospitalization.",1
"An employee was escorting a doctor out of the hospital, tripped over the entrance mat, and fell resulting in a fractured hip.",1
"An employee was operating a crimper. The crimper was activated and crimped the employee's left index finger, causing a partial amputation.",0
"Two employees were conducting operations to abandon a pipeline. The third flash test of the pipeline caused a flash fire. Both employees were caught in the fire; sustaining burns to the face, neck, and hands. Employee 1 suffered first- and second-degree burns and was hospitalized. Employee 2 suffered first-degree burns and was not hospitalized.",1
"An employee was operating a grinding machine to grind ceramic when a button was hit and their left middle finger was caught between a ceramic part and the machine, resulting in a fingertip amputation. The machine was not guarded at the time of the incident.",1
"An employee was walking through a kitchen. The employee stepped on the lid of a tea urn that was lying on the tile floor. The employee fell to the floor, suffering an injury to the back of the left thigh.",1
"An employee was walking from the parking lot to the facility when she slipped on icy pavement and fell, hitting the left side of her head and resulting in a skull fracture and facial contusions.",1
"An employee was unloading a package car using an unloader belt and was vertically adjusting the unloading device in the cargo area of the package car when a raised package caught his left thumb against a shelf bracing, resulting in a partial amputation.",0
An employee was removing a cut piece of wire from a die. He was attempting to keep the pull-up chain from slipping down to the bottom of the drum when his finger was pinched between the chain and the drum. The employee sustained a left ring finger amputation beginning at the fingernail.,0
"An employee was unloading a slab of quartz from a truck when a clamp caught the wood behind the slab. The employee pulled the slab open, causing the clamp to fall behind the slab and the slab to fall forward on him. The employee sustained a broken femur.",1
"A maintenance employee was cleaning the filler of a machine with a rag after residue built up when the rag was pulled into the machine and the employee's right index finger contacted a rotating part, resulting in a fingertip amputation. The machine was in operation at the time of the incident.",0
"An employee was accessing merchandise on an 8-foot A-frame ladder. The employee missed a step, fell off the ladder, and landed on the floor on her right foot, resulting in a foot fracture.",1
"An employee was receiving and unloading merchandise from a vendor truck when one of the pallets containing vinyl fencing fell over and struck the employee, resulting in a hip fracture and back injury.",1
"An employee was moving from one side of a 14-inch pipe to the other side to continue welding a 90-degree piece onto the pipe. As he neared the end of the pipe, the pipe stand was kicked and the piece fell onto the employee's hand, pinching his right ring finger between the bevel of the pipe and the 90-degree piece. The employee suffered a fingertip amputation.",0
"An employee was using an overhead crane to retrieve a pole from the center of a square tube stack, stacked about 3 feet high. She noticed the pole was uneven and positioned herself between the square tube and the pole cart to begin adjusting the sling. As she began to adjust the sling to find the pole's center of gravity, the pole struck the tube and caused it to fall on her lower right leg. Her tibia and fibula were broken.",1
"An employee was threading a flat bar machine when slack got into the coil line. As the employee reached to fix the coil, his gloved left hand got pulled into the metal flat bar coil. The employee's left index fingertip was crushed in the machine, resulting in medical amputation of the fingertip including the loss of bone.",0
"An employee was traveling down an aisle on a powered pallet jack and a co-worker (injured employee) was traveling closely behind on a reach truck. The employee on the pallet jack turned into an aisle and stopped. The co-worker on the reach truck also turned into the same aisle and struck the forks of the pallet jack, crushing their left foot and resulting in a fractured toe and an amputated toe.",1
"An employee was attempting to shut trailer doors when they slipped on ice and fell, resulting in a dislocated and broken left ankle.",1
"An employee stepped out of their work truck, slipped on black ice, and fell resulting in a fracture to their L1 vertebra.",1
"On December 9, 2021, an employee slipped on snow/ice while walking to her vehicle in a parking lot. She fell, suffering fractures to the pelvis and lower back.",1
"On December 9, 2021, the injured employee (employee 1) was working with another employee to clean leaves and other material from a metal gutter system located on the edge of an equipment shed. The employees were walking on the shed roof when employee 1 stepped on the cover of a skylight and fell 13 feet through it. Employee 1 sustained a fractured right shoulder.",1
"An employee was working on a freight dock. A forklift rolled into the employee's leg, breaking it.",1
"While climbing a hill, an employee collapsed and suffered a heart attack.",1
"On December 9, 2021, an employee was descending a 24-foot extension ladder when the ladder slid out from under the employee and the employee fell approximately 10 feet to the concrete ground. The employee suffered fractured vertebrae and was hospitalized.",1
"An employee was standing on the ground speaking to the operator of a stationary, parked forklift. Another (moving) forklift struck him, causing multiple pelvic fractures.",1
"An employee was letting down a dock plate when they fell off the dock onto the concrete ground, resulting in lacerations and contusions to their face and forehead.",1
"An employee was cutting welding wire from the end of his weld gun. It did not cut all the way through and the employee used his snips to tap the end of the wire. The wire bounced off the table and up under his glasses, puncturing his left eye.",1
"On 12/10/2021, an employee was working as a cashier in an office. The employee started experiencing pain in her arm and was hospitalized for a possible pinched nerve.",1
"An employee was operating an overhead bridge crane. As the crane moved a bundle of tubing, it swung and pinned the employee against a handrail. The employee suffered a broken femur.",1
"An employee was carrying a 10- to 15-pound box up a stairwell. He fell backward at the fifth step and landed on the floor on his right side/backside, suffering a fractured right lower arm.",1
"An employee was locking up columns that were approximately 10 feet tall so he could pour concrete. The employee was on a self-releasing line. His positioning belt did not latch properly and when he pulled on it, it gave way and he fell about 6 feet. His self-retracting line engaged, but he struck another employee who was working beneath him. On his way down, his tool belt hit a rebar piece, taking the cap off. The employee's armpit was impaled by the rebar.",1
An employee was cutting meat with a bandsaw. The saw amputated the tip of his middle finger.,0
"On December 9, 2021, a temporary employee was trying to clear candy residue from the top sealer of a horizontal bagger machine using a paper towel. The machine cycled and the employee's fingers were pinched between two steel heated bars that came together to seal a bag, resulting in amputation of the right index fingertip.",1
An employee was lifting a heavy mixing bowl when he suffered a hernia.,1
"An employee tripped and fell to the floor at work, resulting in a fractured collar bone.",1
"An employee was moving a pallet with boxes on it. When the employee walked by the pallet, she tripped over a box peeking out from the side of the pallet and fell onto her hip, resulting in a broken hip that required surgery.",1
"An employee was cleaning up supplies on a roof. The employee slipped on loose granules and fell from the roof to the ground at least 9 feet below, suffering a broken left wrist and a cut to the tip of the right middle finger.",1
"An employee was reaching under a 1,000-pound plastic tote, being lifted by a forklift, to retrieve a loose potato. The employee's left ring fingertip was caught between the bottom of the tote and the forklift's forks. The fingertip was amputated.",0
"On December 10, 2021,  an employee was climbing a fixed ladder to a coffee shop roof to repair the HVAC system. The employee fell approximately 9 feet to the surface below, resulting in a hip injury.",1
"An employee was unhooking a rebar curtain from a crane while at the top of a 28-foot steel wall that they were tied off to when the wall disconnected and folded. The employee fell and struck additional braces and material on the way down, resulting in a fractured jaw and missing teeth.",1
"An employee was moving a moveable staircase in order to clean windows on a school bus. As the employee was pulling the staircase, he lost his balance and fell, hitting the back of his head.",1
"An employee was operating a high-pressure hose with a field-altered end device. The end device came off and the employee was sprayed in the head area, and the metal hose fitting struck the employee in the face and head. The employee sustained a concussion and lacerations to their face, head, and mouth.",1
"An employee was installing solar panels on a roof. The employee fell onto a concrete pad and suffered a broken collarbone, broken ribs, and a concussion.",1
"An employee was overcome by carbon monoxide while operating a gas-powered forklift inside a small, unventilated warehouse.",1
"An employee was coming off a four-step ladder. At the final step, he fell backward to the floor. His head struck the corner of a nearby parts cart and was lacerated.",1
"An tug operator was pinned between a belt loader and the steering wheel of a tug, resulting in hospitalization for fractured ribs and spine.",1
"An employee was cooking soup when the crank handle broke, causing hot soup to spill on their feet. The employee sustained second degree burns on both feet.",1
"An employee was in a bucket truck's bucket, retrieving a device that had been left behind while telecommunications conduit was installed. The employee fell out of the bucket and suffered a broken vertebra.",1
"An employee was cleaning a spin dryer when his hand became crushed, resulting in a finger amputation.",0
"An employee was operating a standup lift truck with a long 2x4 in the operator cab when their left foot was caught between the lift truck and a metal guard rail, resulting in a crushed left foot and broken left heel.",1
"On December 10, 2021, at approximately 11:45 p.m., a Dedicated Logistics, Inc. employee was pulling a jack stand from beneath a semi-trailer to connect to their spotter/yard dog tractor to the trailer. The employee slipped on ice and snow on the trailer lot and landed on their head, neck, and shoulder area. The employee was hospitalized with nerve damage at the neck and shoulder area.",1
"An employee was assisting an operator during flight line repair operations when the bucket of the asphalt remover machine pinched the employee's left index finger, resulting in severe lacerations.",1
"An employee's hand became caught in a crusher machine, resulting in fractures.",1
An employee was moving a cart of beer bottles. Some of the bottles fell. Flying glass severely injured the employee's eye and lacerated the employee's chin and the bridge of their nose. The employee was hospitalized due to the eye injury.,1
"An employee was putting a skinning machine back together when its top part came loose and fell. When the employee caught it, its sharp edge cut his right middle, ring, and little fingers.",1
Two doctors were restraining a 100-pound dog. The dog bit both of them. One of them suffered bites to the left wrist and forearm and was hospitalized when they became infected.,1
"At 10:20 a.m. on December 11, 2021, two forklifts collided. One of the forklift operators suffered a leg injury and was hospitalized.",1
"An employee was using a wrench to remove a rod box at a well head. The rod box broke free and released energy to the employee's right leg, resulting in a right leg fracture.",1
An employee was taking the trash out in the parking lot. A person or persons used a gun to shoot the employee in the leg.,1
"An employee was operating a plastic strap extruder. While attempting to untangle straps that were blocking the discharge area, his right arm became caught in the moving plastic straps, resulting in thermal and friction burns.",1
An employee was shot in the chest while walking to his car. He was hospitalized.,1
"An employee was operating a stand-up forklift when their left leg became caught on racking, resulting in a laceration to their left shin.",1
"An employee missed a step while entering a van, fell backward, and landed on the cement. The employee suffered a broken right elbow and a cracked pelvis.",1
"An employee was cutting meat shanks with a bandsaw. The blade struck the employee's right thumb, causing an amputation.",1
"On December 12, 2021, a fork truck operator struck a protruding rack divider that extended into the aisleway and sustained a severe leg injury.",1
"An employee was removing a small scaffold that had been erected for cleaning in a conical hopper. The employee had handed up the last piece of material and was positioning himself to exit the hopper when his foot slipped. He slid at an angle and his right leg was caught, twisted, and broken above the ankle.",1
"On December 12, 2021, an employee was turning an electric pallet jack left, from one aisle to another and collided with another electric pallet jack, resulting in a right thigh contusion.",1
"The injured employee was servicing a traveling water screen. He was holding an Allen wrench, which was locked into a bolt; as another employee tightened the bolt, his right little finger was caught between the wrench and the machine's sprocket. He suffered an amputation to the finger.",0
"An employee was helping to troubleshoot a disconnected electrical motor when their little finger was pulled into the pulley, resulting in an amputation.",0
"At 2:00 p.m. on December 13, 2021, an employee was installing walk pads on a roof. The employee's right glove came in contact with a heat welder and caught fire. The employee suffered burns to the hand up to the elbow and was hospitalized.",1
"An employee entered the log loading zone while a loader operator was sorting logs. As the operator was moving the log to the pile, it struck the employee on their left side. The employee sustained a fractured hip.",1
"A flagger was directing traffic with a ""slow"" sign paddle. A vehicle struck the flagger, breaking the employee's right femur.",1
"An employee was operating a sliding table saw to bevel the edge of a wood panel. When the employee took the panel to the saw to be cut, the panel slipped and they attempted to grab it with their hand, causing their left hand to contact the running saw blade. The employee's middle finger was amputated at the first knuckle, and their index and ring fingers were amputated at the nail bed. The saw was not guarded at the time.",0
"An employee was working on a sewer line in a trench less than 5 feet deep. A bank of the trench fell in and struck the employee, who suffered a broken pelvis.",1
An employee was loading copper tube into a draw bench machine. The copper was pulled forward by the machine and the employee's finger was pinched between the tube and the draw bench machine resulting in amputation of the left middle finger.,0
"An employee was moving the wooden shipping base of a completed air conditioner unit to allow space for a cardboard box cover to clear the back edge of the base. As he was pulling on the base, his right ring finger was crushed between the bottom of the base and the side frame of the roller conveyor. The employee instinctively pulled his hand away, amputating the tip of his finger.",0
A postal service employee was shot with a gun while delivering mail.,1
"On December 13, 2021, an employee was pulling a forklift by hand to a battery changing area. The forklift activated and pinned the employee's leg against the battery rack, causing a compound fracture.",1
"An employee's foot caught on the edge of a pallet. He lost his balance and fell, breaking his right hip.",1
"An employee was directing a forklift operator. The forklift struck the employee, who suffered amputations to toes on the right foot.",1
"An employee was removing plywood from a forklift truck that was elevated to the third level of the structure (open balcony). As the employee attempted to pull the plywood from the forks, he lost his balance and fell 22 feet to the surface below. The employee suffered broken ribs and a head injury and was hospitalized.",1
An employee was cutting meat with a band saw when their right index fingertip was fractured.,1
An employee was removing straps from the rollers of a strap machine. The straps and rollers caused the amputation of the employee's left middle fingertip.,0
"An employee was troubleshooting a pallet wrapper. The employee was pushing the rotating ring by hand when it caught his glove. His right hand was pulled into the drive wheel, which removed the skin from the tips of his middle and ring fingers.",1
"An employee was walking toward the maintenance shop when they slipped on ice and fell to the ground, resulting in a broken eye socket.",1
"An employee was scanning RFID chips on military vehicles stored on a flatbed rail car. The employee slipped and fell off the rail car to the ground 5 feet below, suffering a broken leg.",1
"An employee was using a wrench to loosen a nut and bolt on a transformer secondary block. The wrench came into contact with two secondary electrical blocks at once, causing a secondary arc flash. The employee suffered first-degree burns to the left side of the face, neck area, and left arm.",1
"An employee was jump starting a vehicle. Once the vehicle started, it jolted forward and hit the employee in the head.",1
"On December 13, 2021, an employee was operating a meat bandsaw. He had just finished cutting some meat, and then turned away from the bandsaw to gather more meat, when his right index finger contacted the blade. He suffered an amputation just below the first knuckle.",0
"An employee was replacing a belt on an exhaust fan motor. While rotating the bottom pulley with their right hand, the employee's left index finger became caught between the pulley and belt, resulting in a fingertip amputation.",0
"An employee was unloading materials from a truck. He was standing on the truck ramp as it lifted, and his right foot was caught between the back of the truck and the ramp. He suffered a fracture to the second toe.",1
"An employee was cleaning around a table saw. While the employee was cutting up excess material, the saw blade caused an amputation to the employee's left middle finger.",0
An employee was under a truck installing a new kingpin. The truck fell off its jacks and landed on and crushed the employee's midsection. The employee was hospitalized.,1
An employee was operating a machine when its shear actuated and cut his right thumb. The thumb was medically amputated.,0
"On December 15, 2021, an employee was adding ammonium hydroxide to a chemical batch and sustained lung damage due to ammonia exposure.",1
"An employee working in an assembly line attempted to step over a 7-inch platform and move over a crossmember. The employee slipped and fell to the floor, resulting in a right hip fracture.",1
"An employee was using a forklift to empty a hopper when her finger was pinched between the hopper container and the forks, resulting in an amputation.",1
"An employee tripped and fell while walking out of an office. Her right kneecap was broken on the parking lot ground, and she was hospitalized.",1
An employee was installing a new pulley belt on a pulley system to the heat exchanger. Their right index finger was caught in a pinch point resulting in amputation.,0
An employee was pulling wire toward himself when it punctured his lower throat. He was hospitalized.,1
Employee 1 was operating a stand-up forklift on an incline ramp. Employee 2 was operating another stand-up forklift behind employee 1. Employee 2's leg became caught between the two forklifts and fractured.,1
"An employee was walking across an icy parking lot before the start of her 8:00 a.m. work shift. She slipped and fell, hitting her head and suffering a skull fracture near the left ear and internal bleeding (along with dizziness, nausea, and memory loss). She was hospitalized.",1
"An employee was wiping down a plate on a planer machine when his rag became caught, pulling his right hand into the machine. The employee's index and middle fingers were amputated.",0
"An employee was closing the doors to a delivery truck when their right little finger was crushed by the doors, resulting in a fingertip amputation.",1
"An employee was coming out of a truck with a pneumatic nail gun. The gun fired a nail into his left foot, breaking a bone.",1
"An AT&T employee was on a ladder leaning against a house. He lost his balance and fell to the ground, suffering a broken ankle. He was hospitalized and underwent surgery.",1
"An employee was on a catwalk above the auditorium performing maintenance work on an air handler unit. The employee was cleaning up when he fell over the guardrail onto the auditorium bleachers approximately 35 feet below. The employee sustained broken bones, lacerations, and a concussion and was hospitalized.",1
"A pillow stuffing machine had been cleaned and unjammed in a maintenance shop. A technician re-energized the machine to ensure proper functionality, then reached inside it to remove something. His arm was pulled under a tensioning roller.",1
"On December 14, 2021, a temporary employee was outside loading ore from the train into the conveyor system. The employee entered a confined space to clean ore from the wheel of the conveyor belt system when their arm was pulled into the conveyor. The employee was hospitalized for right arm fractures, contusions, and facial lacerations.",1
"An employee was getting out of the back of a truck when he lost footing and fell to the ground below, resulting in a broken leg.",1
"An employee was repairing the ridge cap of a pole barn. The employee stepped over the ridge cap to unscrew the bolts, slipped on ice on the roof, and fell approximately 19 feet to the ground below, resulting in two broken ankles.",1
"On December 15, 2021, an employee was assisting in a process change evaluation. Two cylindrical adapters were to be joined together with a 40lbs. spacer in between. Several bolts, which were used to secure the components together, had damaged threads. In the process of removing the bolts, the spacer came down. The adapter slid down and pinched the employee's left index fingertip between the flange of the adapter and the metal plate, resulting in an amputation.",0
An employee was using a jackhammer to break concrete when they struck an electric line. An arc flash occurred and the employee was burned.,1
"On December 15, 2021, an employee tripped and fell off a 4/12 pitch residential roof while installing shingles. The employee was hospitalized with back and neck injuries.",1
"A ski instructor collided with a guest skier who was unable to stop, resulting in a fractured right tibia and fibula.",1
"An employee was testing the pneumatic cylinder and gears in a centering device before installing the housing cover. The employee placed his hand on the assembly to steady it, and the cylinder severed the tip of his left fifth finger. The employee's finger was amputated at the distal joint.",0
"An employee was working with a tree trimming crew. He was freeing up a rope in a winch spool on the back of a chipper when the winch activated. His left arm was trapped between the rope and the winch housing, and he suffered a fracture to the forearm. He was hospitalized, requiring surgery.",1
"The operator entered information into the data screen of the line winder, then turned around and walked to the paper rolling machine on the line. He tripped on the edge of a presence sensing safety mat and fell into the machine. The employee's left arm struck a bar and his right hand landed on an in-running nip point of the vertical roller, horizontal feed belt, and the housing of the vertical belt. Three fingers on the operator's right hand were degloved.",1
"An employee went to pick up a tool that had fallen near an adjacent machine. Their left hand became caught inside a blower motor fan blade, resulting in a dislocated finger and a fractured finger. Surgery was required to repair the injuries.",1
"A lift operator was snowboarding from a lift station to the base at the end of his shift. He hit a chunk of ice and flipped forward onto his back, suffering a fractured vertebra. He was hospitalized.",1
An employee slipped on a patch of ice and fell from a ramp to the ground 3-4 feet below. The employee suffered a broken hip.,1
"An employee was unloading a produce truck using a pallet jack. The momentum of a pallet as it came down pushed her into another pallet. She suffered an injury to the right ankle and was hospitalized, requiring surgery.",1
"An employee was shutting a gate at a construction site when the wind caught the gate, causing the employee to fall to the ground. The employee sustained a broken hip.",1
"An employee was coming out of a manhole onto some scaffold decking. The employee lost his footing, fell backward off the platform, and landed upright on both feet, resulting in fractures to two lower vertebrae.",1
An employee was removing a deck board from a cargo container when they lost balance and fell approximately 3 feet from a step ladder to the concrete below. The employee sustained a right hip injury.,1
"At 9:10 a.m. on December 15, 2021, an employee fell off the rear catwalk of a tractor-trailer. He landed on his back and suffered a concussion, a head injury requiring stitches to the back of the head, four broken ribs, and two broken vertebrae in his back.",1
"An employee was troubleshooting a float switch for an ammonia auto purge on a refrigeration unit. The employee was sprayed in the mouth with ammonia, resulting in chemical burns to the lungs.",1
"An employee was replacing a service cable line when they fell from the ladder to the ground below. The employee sustained a fractured C1 vertebra, nose, and orbital bone.",1
"Three employees were performing maintenance on a natural gas compressor. Part of the job was changing the belt on the cooler (fan) from the compressor. Prior to changing the fan's belt, an employee removed  a section of the fan guard and set it over the compressor. The metal guard section was 3 feet by 2 feet and 8-inches thick and weighed approximately 40 lbs. The guard fell from the engine more than 5 feet and struck the injured employee's hand, resulting in amputation of their index finger.",1
"An employee tripped over the electrical cord for a space heater and fell to the floor. The employee was hospitalized with a shoulder fracture, as well as injuries to their head, leg, and ankle.",1
"An employee was mopping a restroom when they slipped and fell to the floor, resulting in injuries to their fingers, lower back, neck, and forehead.",1
"An employee was hoisting the steel frame of a compost turner when the hoisting strap broke, pinning the employee to the ground. The employee was hospitalized with severe injuries to their mid-section and pelvic areas.",1
"An employee was exiting a trailer when their foot slipped, causing them to fall to the ground and suffer a broken left leg.",1
"On December 15, 2021, at 10:50 AM, an employee was standing in 2 feet of water while guiding a crane operator, who was installing a 40-foot long concrete piling into a starter hole. The starter hole was created using a water jet, and as the concrete piling was being installed, the bank gave way, causing the employee's left foot to be caught between the wall of the hole and the concrete piling. The employee's left big toe was crushed, resulting in amputation.",0
"An employee was investigating a plug in a system when their left middle fingertip was caught in the airlock, resulting in amputation at the first knuckle.",1
An employee was performing duct work using a flathead screwdriver. The tool slipped from his hand and cut his top left eyelid. He was hospitalized.,1
Employee 1 was performing water jetting work. Employee 2 was struck by the pressurized water and sustained a laceration to their upper left leg.,1
"An employee was securing trusses at a job site when a chain link fence fell and struck them in the back of the head, resulting in a laceration.",1
"An employee was carrying aluminum food trays down a set of stairs when she missed a stair and fell, resulting in a foot injury.",1
"An employee was dismantling a frame scaffold. The employee stepped up onto the bottom rung of the frame to hand another employee a piece of diamond plate. As the employee stepped back down from the rung, his foot slipped and he fell 2 feet to the concrete floor. He was hospitalized with a fractured left hip.",1
An employee fell about 4 feet from a 6-foot straight ladder. The employee suffered a broken right heel.,1
An employee was crouching under a rack shelf in order to rotate a perishable product on a pallet. The employee stood up and hit the back of her head on the metal shelf. The employee was hospitalized with head trauma.,1
"An employee in training was standing behind a trailer while their supervisor loaded rolling carts onto a liftgate. One of the carts rolled over the liftgate stop and fell onto the employee, resulting in injuries to their left ankle.",1
"An employee was cutting PVC pipe using a miter saw. The saw cut the back part of his left thumb, causing the amputation of the last joint of the thumb.",0
"An employee was righting a cardboard drum that had fallen off a pallet. The drum slipped on the pallet and landed on the employee's right little finger, amputating the fingertip.",0
"An employee was walking down the steps outside a building, carrying a 10-pound box. He slipped at the second or third step from the top and fell to the pavement with his legs folded behind him. He suffered ruptures to the quadriceps tendons in both knees.",1
"An employee was showing a vehicle to a customer when he tripped, fell, and hit the pavement. The employee was hospitalized with a broken nose and brain bleeding.",1
"An employee was installing fireproofing material using a sprayer. The sprayer jammed and as he went to clean it, fireproofing material shot out and lacerated his right hand.",1
"An employee was standing at the foot of a ladder. When he turned to pick up a tool, a ladder rung caught his foot and he tripped and fell to the ground. He suffered a broken hip.",1
An employee was performing maintenance on a vehicle when a grate fell and struck his hand. Surgery was required to repair the injury.,1
"Three employees were moving a cabinet through a storage room. The cabinet bumped a cart holding a rack; the rack began to teeter, then fell and struck one employee's right hand while it was on the handle of the cart. The employee's right little finger was medically amputated at the knuckle.",0
"An employee was standing on a bin to reach supplies. His boot caught on the bin and he fell to the ground, suffering a broken hip.",1
"An employee was pushing a pallet through a dismantler bandsaw. His right hand contacted the sawblade, which lacerated his middle finger and caused an amputation at the first knuckle.",1
"At about 3:40 a.m., a frac crew was pumping a stage when a conveyor belt on a sand hulk became clogged. An employee had just removed a clog in the equipment when the belt began to run again and pulled in the employee by the left arm. The employee suffered an injury to the hand and arm and was hospitalized.",1
An employee was lifting a 44-pound case of bottled water and felt pain in the abdominal area. The employee sustained a hernia and was hospitalized.,1
An employee was making an adjustment to the foil hot stamp machine. The machine activated and caught the employee's right hand resulting in second degree burns.,1
"An employee was working from a ladder. Another employee tripped over a piece of concrete and grabbed the ladder; the employee fell 2 feet to the concrete floor, landed on his back, and then hit his head on the concrete floor.",1
"An employee was operating equipment when he reached into a filler to grab a bag. The employee's coat caught on the bag clamp and his hand was pulled into the chain gear, resulting in an amputation to his left index fingertip.",0
"An employee was operating a motorized pallet jack. While in reverse, the pallet jack power unit doors collided with the leg of a racking system, and the employee's knee was pinched. The employee sustained a laceration and a contusion to their left knee.",1
"An employee was closing an aircraft door. The door handle caught the employee's finger and lacerated the fingertip, causing an amputation.",0
"An employee was riding a double pallet jack rider and fell off, resulting in a contusion to the back of the head.",1
"An employee was struck by a centrifuge engine, knocked off by a top shelf by slack in a crane cord. The employee suffered broken vertebrae and lacerations to the head and neck.",1
"An employee was trying to adjust something in a machine when the machine pulled him in. His hand and arm were crushed by two rollers, and he suffered a partial degloving to the hand.",1
"An employee was using a pipe saw to cut a 1-inch concrete block. The blade broke, and a piece of the blade became stuck in the employee's right leg.",1
An employee was operating a forklift when it struck a lift in an aisle. The employee's upper left thigh was crushed.,1
"An employee was adjusting a manhole cover when his left ring finger was crushed, resulting in an amputation.",1
An employee was preparing chemical solutions in spray bottles for cleaning. A bleach solution was mixed with an ammonia solution creating ammonium chloride gas. The employee had difficulty breathing and severe coughing and was hospitalized.,1
"An employee was adjusting a manhole cover when it smashed his left ring finger, causing an amputation.",0
An employee was removing a coin from a coin vault for a customer. She bent down and could not stand back up. The employee suffered a lumbar strain.,1
An employee was moving dirt with his hands when he was bitten by a venomous snake on his right hand.,1
"An employee was operating a table saw with an infeed roller mechanism to cut wood pieces. As he was feeding the infeed roller mechanism, a piece of wood kicked back and struck the employee in the abdomen.",1
"An employee was standing on a ladder tightening bolts on a new mixer. The employee lost balance and fell off the ladder to the floor 4 to 5 feet below and suffered arm, back, and leg injuries.",1
"A 400- to 500-pound vacuum pump fell off a platform and landed on an employee's right foot, crushing it. The employee was hospitalized.",1
"An employee was fitting pipe on the back side of a new feedwater pump. The 1/2"" fitting on the pressure gauge snapped and released 220 degree F pressurized water onto his abdominal area. The employee sustained burns to his legs and abdomen.",1
An employee was underneath a set of stairs that had just been installed when a piece of steel fell and struck him in the head. Staples were needed to repair the employee's head injury.,1
"An employee slipped on a rock on the stair and fell on the steps of a customer's home, resulting in a hip injury.",1
An employee was separating a boom from a counterweight on a deicing truck. The boom and counterweight shifted and crushed his hand.,1
"An employee fell from a ladder to the ground, striking their head and suffering a concussion. The employee was hospitalized.",1
"An employee was reinstalling a 200-pound drive motor shaft in a mold machine, holding the shaft while aligning it and inserting it into the machine's shaft hole. The employee's left little finger was caught between a bearing on the shaft and the hole; the tip of the finger was amputated below the first knuckle.",0
"An employee was positioning a workpiece on the table of a mortise and tenon machine. She pushed the start button with her left hand and her right hand was resting on the workpiece. As the machine actuated, the guard that protects the rotary cutter head crushed the employee's right middle fingertip, resulting in an amputation.",0
"On December 17, 2021, two employees were working together to cut a pipe. Employee 1 was operating the saw and employee 2 was standing behind the cutting operation to assist. Employee 1 moved the saw to the side and the blade contacted employee 2's arm. Employee 2 was hospitalized with a laceration, and surgery was needed to remove plastic embedded in their arm.",1
"A field service technician was servicing a lottery machine behind a counter. An altercation began between a customer and another employee, during which the technician suffered a broken ankle.",1
"An employee was performing maintenance on a gas compressor when his foot slipped off the piping on which he was standing. As he fell, the employee put his left hand out to catch his fall. The valve cap he was holding in his right hand fell onto his left ring finger resulting in an amputation.",0
An employee was walking down a dock ramp. A forklift struck the employee as it backed down the ramp. The employee suffered a foot/leg injury.,1
"Employee 1 was operating a dozer's winch from inside the cabin. While attempting to unhook from a D-ring, he had to loosen the tension of the cable. Upon doing so, employee 2 walked over to the winch and grabbed the cable with her left hand. When employee 1 moved the controls to spool out the winch, employee 2's left hand was pulled into the cables. Employee 2 sustained a broken left ring finger and a partial amputation to her left little finger.",1
"An employee was working on a meat processing line, inspecting a ham leg, when they noticed two pieces of ham leg approaching the hind foot saw. The employee slipped while reaching to grab them, and the saw amputated their right middle finger at the first knuckle.",0
"An employee was operating a blasting machine. Between parts, the employee was shoveling some steel shot off the floor. While shoveling the steel shot behind the machine, he lost his balance and fell into the chain and sprocket on the back of the blasting machine, resulting in amputation of his right index finger to the first knuckle. The chain and sprocket were not guarded at the time.",0
"An employee was about to start scanning pallets in a shipping container when two fingers on their left hand were crushed between the forklift and a shipping container, resulting in an amputation.",0
An employee was sanding a piece of metal on a belt sander when his gloved hand was caught between the belt and the piece being sanded. The employee sustained a partial amputation to their right index finger.,1
"An employee was cleaning debris from the rear of a dump truck body. The truck's rear swinging door struck him, causing a crush injury, deep laceration, and partial amputation to the right little finger.",1
"An employee was walking away from the reception desk when he tripped over an object on wheels, fell to the floor, and hit his head, resulting in a concussion.",1
"The injured employee was passing a metal panel to a co-worker in a boom lift. The co-worker did not have the panel when the injured employee let it go. The panel fell and struck the injured employee, resulting in two fingertip amputations.",0
A forklift operator was reversing toward the production area while an employee was walking from the lunchroom to the production area. The forklift struck the employee and crushed and lacerated their right foot.,1
"An employee was walking past an electric pallet jack. The employee stepped onto the jack's outrigger, then slipped off it and suffered a closed fracture to the right ankle.",1
"An employee was standing by a computer conducting end-of-shift duties when a roll of carpet fell off a nearby forklift, striking the employee on the backs of her legs. The employee sustained a broken femur.",1
An employee was operating a ripsaw. The saw kicked back and impaled the employee's right arm.,1
"An employee was moving a 55-gallon drum from a pallet onto the ground. As the employee attempted to lower the drum, the end of the drum pinched and amputated his left middle fingertip.",0
"On December 17, 2021, an employee was pushing a hoist with steel material attached to a hook. The weight shifted on the hook and smashed the employee's right little finger, causing the amputation of a third of the fingertip.",0
An employee was cleaning a machine with a rag when the rag got too close to the blades and the blades grabbed the rag and his right-hand fingers resulting in an amputation injury.,1
The injured employee was scooping raw material into a bucket. Their hand became caught between the bucket and the guard on the back of a sweeper being operated by another employee. The injured employee sustained a partial amputation to the left ring finger.,0
"On December 17, 2021, an employee was troubleshooting an issue with the conveyor line. The employee was trying to remove a dough ball from the conveyor between a proofing area and a dough press when she was caught by and pulled into a set of rollers. The employee was pulled in up to her shoulder area and pinched between the rollers. The employee suffered broken ribs, a punctured lung, nerve damage and had the bicep of her left arm torn from the bone. The employee was hospitalized.",1
"An employee was working from an 8-foot ladder, installing cable above a ceiling. The employee fell from the ladder to the floor and suffered a back injury.",1
"An employee was using a tape measure to gauge the width of a plastic sheet as it went into an oven. The tape measure got caught on the sheet and was pulled in. The employee was caught between the sheet and the idle roller, suffering a cut to the arm.",1
"A Charles E. Jarrell employee was on a 10-foot A-frame ladder, removing a hanger for refrigeration lines that had been hung from a concrete ceiling. Some of the fireproofing material that had been sprayed onto the ceiling and the refrigeration lines fell onto the employee's face, causing him to fall off the ladder and suffer a broken tibia.",1
An employee was shearing rebar to different lengths. The rebar shear's hold-down clamp crushed the employee's right hand.,1
"An employee was placing pieces of wood on a saw. The guards of the saw lowered, and the employee's left hand was caught between a piece of wood and the guard. The employee was taken to the hospital for treatment, and their left middle fingertip was amputated.",0
"Metal coils on a pallet fell off a shrink wrap turntable and struck an employee, resulting in a leg fracture and hospitalization.",1
"An employee was operating a forklift and backing into a truck bed. His hand was caught between the forklift cab and the frame of the truck, resulting in amputation of two fingertips.",1
"An employee was using a ladder to exit a trench when he fell and landed on a concrete pipe. The employee sustained a broken wrist, tibia, and kneecap.",1
"An employee was descending a ladder when the ladder began to collapse, causing the employee to fall approximately 20 feet to the ground and suffer a broken right femur.",1
"An employee was collecting yard waste debris from the ground and loading it into a garbage truck's hopper. The packer blade caught his left hand against the inner wall of the hopper, resulting in an amputation to the tip of the ring finger.",1
"An employee was preparing to hand metal studs through a floor hole to the floor below when they fell approximately 10 feet through the hole, resulting in right wrist and spine fractures.",1
"An employee was installing a garage door. As he moved the center bearing bracket into place, the wood spring pad cracked. The bracket gave out and hit him in the mouth. He suffered lacerations to the mouth and chin and lost two front teeth.",1
"While starting a mill machine, an employee's left hand slipped and was cut. The employee was hospitalized and his left little fingertip was medically amputated.",0
"An employee was stepping away from a table. The employee's boot got stuck under the table's leg, and the employee fell to the concrete floor and suffered a broken right femur.",1
"An employee slipped and fell on the front step of a residence after delivering mail, resulting in a bruised lung.",1
"An employee was completing parcel delivery at a residential customer location. While the employee was walking back to her vehicle, she tripped on an uneven driveway slab and fell to the ground, resulting in a left arm fracture.",1
"An employee was cleaning meat from within the x-ray portion of a purge machine. The gate of the machine activated, and its valve amputated the employee's fingertip below the fingernail.",1
"An employee was preparing to re-assemble a conveyor extension. She lifted the conveyor extension to place the arms in the bracket and lost control of the extension, causing the weight of the conveyor extension to shift and pinch her right ring finger against the conveyor frame. The employee sustained a distal phalanx fracture and her right ring fingertip was amputated.",0
"An employee was driving a forklift from one area to another. The employee swerved to miss equipment on the ground, and his left leg was caught against a wall. He suffered a compound fracture to the ankle.",1
An employee was working dairy backstock and suffered a possible heart attack.,1
"An employee was helping to install a trolley and monorail system when a portable winch fell and struck their right index finger, resulting in a fracture.",1
"An employee was exiting a building when she fell off a step, resulting in a broken knee. The employee was hospitalized and underwent surgery.",1
"Employee 1 was attempting to sit in an office chair. While sitting, the chair rolled from underneath employee 1, causing them to fall onto employee 2. Both employees fell to the floor, and employee 2 sustained a broken right fibula.",1
"An employee was staging a piece of steel plate, raised on the forks of a forklift. The employee was putting a piece of wood under the plate when the plate fell off the forklift's forks and crushed his right foot. He suffered an amputation to the foot.",1
"An employee's finger was crushed in a closing vehicle door, resulting in a fingertip amputation.",0
"A wheel lift system for a helicopter was being lowered. A jack bar recoiled and hit an employee in the face, breaking the employee's jaw on both sides and throwing the employee to the ground. The employee was hospitalized.",1
"An employee was building pallets when a flipper arm tore off a stringer. When the employee pulled off the stringer to fix the pallet, a photo eye was activated, which fed a stringer into the work area and caused the employee to be caught between the stringer and the jib. The employee sustained a partial amputation to their left ring finger.",0
"At about 9 a.m., an employee stepped into a 2- to 3-foot-deep sump pump hole in the floor of a pump room. He suffered a fracture to the lower left leg and was hospitalized, requiring surgery.",1
An employee was holding an elevation rod inside a 7- or 8-foot sewer trench. The trench collapsed and he was hospitalized.,1
"An employee was switching out a mower attachment. The attachment's flat bar struck the employee's right ring finger, causing the amputation of the fingertip.",0
An employee was moving pots from one conveyor belt to another over a gap created by a return auger. The employee's sweater became entangled within the  horizontal auger conveyor and pulled her left hand and arm into the machine. Her arm was amputated above the elbow.,1
An employee was removing a transformer. The employee's left index finger was pinched between the transformer and another object. The fingertip was amputated.,0
"During sort line operations, an employee stepped onto an operating conveyor belt, which caused them to fall approximately 14 feet to the floor below. The employee sustained fractures to both feet and an ankle.",1
"On December 18, 2021, an employee was attempting to remove the metal shaft from the core of a completed nonwoven roll. The employee gripped the metal end of the shaft and pushed hard onto the shaft. The shaft suddenly released and smashed his finger between the plastic collar and the end of the shaft. The impact resulted in a partial amputation to the index finger.",0
An employee was cleaning a motor-driven conveyor unit. The employee suffered amputations to the left middle and ring fingers and was hospitalized.,1
An employee was closing the side door on an ambulance compartment. The door amputated the employee's left ring finger at the first knuckle.,1
"An employee was walking toward the exit of the facility, tripped over a floor mat, and fell to the cement floor, resulting in a broken femur that required surgery.",1
"An employee fell off a ladder while stocking merchandise, landing on the concrete floor and suffering a broken foot. The employee was hospitalized.",1
The parking brake on a forklift was not set and it began to roll backward. An employee was struck by the forklift while attempting to stop the forklift from rolling backward. The employee sustained a fractured left tibia.,1
"An employee was moving two cages of product when her finger became caught between the two cages, resulting in an amputation injury.",0
"While delivering a package, an employee slipped in an icy driveway and hit her side on the customer's plants. She suffered a broken rib and a punctured lung.",1
"An employee was cleaning out a waste container on a dust collector. The employee went to remove a string from the dust collector and his hand was pulled into the rotary valve, resulting in amputations to two fingertips on his right hand.",1
"An employee was ascending a ladder. One of the ladder legs broke and the employee fell, resulting in a broken left wrist.",1
"An employee was kneeling on the floor, using a hand grinder with a wire wheel to remove paint from a post. The drawstring of the employee's sweatshirt became caught in the wire, which pulled the wheel toward the employee. The wire wheel struck the right side of the employee's face and neck, severely lacerating the neck and injuring the right side of the jaw.",1
"On December 20, 2021, an employee was walking into the cafeteria when she tripped and fell to the ground, resulting in a right hip fracture.",1
"An employee was lowering a truck liftgate when his left ring finger became caught in the gate, resulting in a partial amputation.",0
"An employee reached into an industrial dryer and suffered a severe laceration to the forearm, caused by a metal protrusion from the dryer or by material in the laundry load.",1
An employee was cleaning debris from an access/ceiling area. The employee fell through the entry/opening of the area to the concrete floor about 13 feet below. The employee suffered a broken lower back vertebra and was hospitalized.,1
"A framer was working in an attic. He slipped and fell through the trusses, landing on the floor about 15 feet below and breaking his elbow.",1
An employee slipped on ice while getting into his truck. He fell to the ground and suffered a dislocated and fractured hip. He was hospitalized.,1
"An employee was supervising a crew in moving steel-tubing horse barn stall panels. Three panels had been loaded on a forklift. The forklift began to set the panels down and they began to shift. The employee was struck by and caught under the panels, suffering contusions to both legs and a broken left tibia.",1
An employee's right foot was struck by and caught between two forklifts resulting in a puncture wound and laceration to the right foot.,1
"An employee was using a table saw to cut foam when their right thumb contacted the rotating saw blade, resulting in a fingertip amputation. A guard was in place at the time.",0
"An employee attempted to grab a piece of tape off a print cylinder while it was operating. The employee's right thumb and index finger were caught between the cylinders, resulting in a fingertip amputation.",1
"An employee was removing pita material from a stopped conveyor. A fixed metal guide and frame caught the employee's hand, causing a fingertip amputation. The employee was hospitalized.",1
An employee tripped on an extension ladder on the floor while stepping over it. He fell onto the ladder and suffered spiral fractures to his left tibia and fibula.,1
"An employee was standing at ground level preparing for his work when a roll of debris netting was dropped from a nearby scaffold. The roll struck the employee on the head, knocking him to the ground. While falling, the employee also struck his head on a pallet. The employee sustained a brain injury.",1
"An employee was stacking 40-pound boxes of chicken leg quarters. A rotating hose clamp below the guard/conveyor on a conveyor belt caught the employee's smock sleeve and pulled his left arm down at an angle, breaking the forearm.",1
An employee exited a truck to open a gate. The truck rolled and pinned the employee against the gate; the employee suffered multiple broken ribs and a broken sternum.,1
An employee was replacing a drill rig's transfer case. The case shifted and amputated the tip of the employee's right index finger.,0
An employee had been transporting candy bowls. The employee tripped and fell into a bowl of hot caramel resulting in second degree burns to 5% of their body.,1
"On December 20, 2021, an employee was slagging off a furnace when molten iron discharged from it and landed on the employee's uniform. The employee sustained burns on their chest and arms, resulting in hospitalization.",1
An employee fell 14 feet from the roof of a home to the paved driveway below. The employee was hospitalized for a concussion.,1
An employee fell 14 feet from a steel beam and sustained a fractured pelvis requiring hospitalization.,1
"An employee was on a ladder, looking through a hole on top of a cooler. He fell through the hole and his head struck the floor about 7 feet below.",1
"An employee was operating a high reach forklift. As the employee was backing up the forklift, his elbow struck a bracket on the pallet racking. The employee sustained a fracture to his right elbow and was hospitalized.",1
An employee was working at the convergence of two conveyors on a line. A moving conveyor caught her left ring finger and amputated the tip.,0
"On December 20, 2021, an employee lost his balance while bending to pick up his stop/slow traffic signaling paddle. He fell to the ground and suffered a broken right hip. He was hospitalized.",1
"An employee was standing on a trailer to remove the key from the ignition of a boring machine. He lost his footing and fell 39 inches to the ground, landing on his left side and injuring his hip.",1
"An employee was using a ladder to retrieve a box from a shelf. As they descended the ladder, the employee missed a step and fell to the cement floor, resulting in a fracture to their right medial tibial plateau.",1
"An employee was moving a 4-foot by 3-foot steel plate from a table to the floor in preparation for shipment. A plate clamp and crane were being used for hoisting. While the plate was being lifted off the table, it swung into the employee, then moved to the floor, striking the employee's right shin/ankle/foot.",1
"An employee was operating strapping (packaging) equipment. His fingers were cut on the top sheet that strapped together, and his left middle and index fingertips were amputated.",1
"An employee was loading a powder-actuated fastener tool. The tool discharged and fired a pin into the employee's left wrist. The employee suffered damage to an artery and was hospitalized, requiring surgery.",1
"An aluminum extrusion became stuck while it was being pulled out onto the table from a press. While trying to free it, an employee was struck by the puller as it retracted back home to the press area. The employee suffered a broken rib, a punctured lung, and abrasions. The machine was not locked out/tagged out at the time.",1
"An employee was using scissors to open a plastic bag with a part inside. The scissors cut his fingertip, causing an amputation.",1
An employee made a delivery at a residence. The employee turned to return to the delivery truck and heard a pop and fell to the ground. The employee's right hip was broken by the turning/twisting movement.,1
"On December 21, 2021, an employee was descending a scaffold ladder when his lanyard became tangled. He lost balance while freeing the lanyard and fell, landing on the ground about 6 feet below and breaking his left hip.",1
"On December 21, 2021, an employee was clearing material from a material blending machine's lower hopper at the slide gate. The employee suffered an amputation to the right middle fingertip.",0
"An employee was under a machine, threading aluminum foil through it. The machine's jog button was pressed while the employee's right middle finger was in the roller, and the roller's blade amputated the employee's fingertip.",0
"An employee was inspecting a furnace. While removing an access door from the furnace, the employee's finger was pinched between the access door and the outer furnace beam support, resulting in amputation of the left little fingertip.",0
"An employee had just exited a dispatch office. He lost his footing on the top step of a stairway, fell down the stairs, and landed on his back. His head struck the concrete floor, and he suffered head and back injuries.",1
"An employee was tasked with identifying a conveyor system failure. When the employee opened the conveyor, a flash fire occurred. The employee sustained burns to the hands and face and was hospitalized.",1
"An employee was using a circular saw to cut raw lumber down to size. He was operating the saw with his right hand when its blade contacted his left middle, ring, and little fingers. The blade amputated his middle finger at the top knuckle, cut his ring finger at the middle knuckle but left the finger still attached, and amputated his little fingertip.",0
"An employee in the rear of an aircraft was unloading baggage from a cargo bin when they fell approximately 7 feet to the ground, resulting in a broken spine.",1
"On December 21, 2021, an employee was working on a packaging line. She turned to get a box from a metal table behind her; her foot caught on an anti-fatigue mat and she fell backward onto the table. She suffered a punctured lung and three broken ribs.",1
An employee slipped on wet plywood while trying to tie off on a roof. The employee fell 13 to 16 feet and suffered broken bones.,1
An employee was applying mud to drywall when he fell from 4-foot-high scaffolding to the wooden floor below. The employee sustained fractures to their left arm and pelvis.,1
A temporary employee was using a piece of wood to push garbage down inside a dumpster. The stick lacerated his right cornea.,1
"An employee was preparing a robot for a welding task. The employee grabbed a crane hook; the crane was still lifting a piece of equipment, and the employee's left index finger was caught between the hook and the equipment. The finger required a medical amputation.",1
An employee fell from a 6-foot step ladder while adjusting an outdoor floodlight. The employee's left leg was broken.,1
An employee was using a backpack blower to clean an area after a pine straw installation. The employee stepped onto a grated air shaft that gave way and the employee fell approximately 12 feet to the floor. The employee sustained a fractured right ankle and a fractured left heel.,1
"An employee was unloading a spool of metal sheeting when the spool slipped off the back of the truck, bounced up, and struck the employee's nose, right shoulder, and right leg. The employee sustained a shoulder injury and a broken right leg.",1
"An employee was disconnecting the air hoses for a snow-making system. When the employee disconnected one of the hoses, a burst of pressurized air struck his face, causing an orbital floor fracture to his left eye. He was hospitalized.",1
"An employee was working on a table blast machine. While he was cleaning a clog, his coat became caught in the moving axle, which pulled him in and broke his right arm. He was hospitalized.",1
"An employee was operating a rod threading machine. When he opened the clamp and grabbed the rod, it was still spinning; it slammed against the wall of the machine and amputated the tip of the employee's right index finger.",0
"An employee was setting up a machine when the product in it became jammed. The employee had just cleared the jam when the machine cycle activated, crushing the employee's right middle and ring fingers and causing amputations to both fingertips.",0
"On December 21, 2021 at approximately 12:00 PM, an employee was feeding steel into a plate roller when his leather glove was caught in a nip point created by rollers resulting in amputations to the employee's right thumb and index fingers.",1
"An employee was turning his bicycle when he lost traction on wet pavement and the bike slid out from under him. He fell on his right side, suffering a broken right hip that required surgery.",1
"On December 22, 2021, employees were using aerial lifts to install ceiling liner and panels. An employee was working from a raised aerial lift and leaned against the lift's door gate, then fell 8-10 feet to the dirt, gravel and snow-covered ground below. The employee was hospitalized with fractures to their L2 and L4 vertebrae and lung lacerations. Fall protection was not attached at the time.",1
An employee drank bleach from a cup. She was hospitalized.,1
"Employees were dry-fitting drainage grates and frames to verify measurements were accurate. A piece of lumber under the edge of one of the grate frames was interfering with measurements. Two employees lifted the frame so another employee could remove the lumber. The frame then dropped on the third employee's right hand, breaking and lacerating the ring finger. The employee was hospitalized, requiring surgery.",1
"An employee was trying to fix a metal scrap chopper. His left hand was caught in the point of operation and he suffered an amputation to the middle fingertip (without bone loss), as well as an avulsion to the index finger.",0
"An employee was using a bench grinder to grind a bevel on a tail piece used in a spike machine. The tail piece got caught and was pulled down to the part rest, causing the employee's right thumb to be pulled into the grinding disc pad. The thumb tip was amputated.",0
An employee was carrying shelving units down a rolling staircase/ladder. She lost her balance and fell to the ground about 5 feet below. She suffered fractures to a leg and an elbow.,1
"At about 5:50 p.m. on December 22, 2021, an employee was cutting meat. His hand slipped and the knife amputated the tip of his right thumb.",0
An employee sustained an amputation to his fingers after his hand was caught in a drive belt.,1
"An employee was unloading a daily shipment of parts when he tripped on the corner of a pallet and fell. His left knee struck the concrete floor, and his left leg was broken.",1
"An employee was loading and unloading cartridges with a forklift. While disengaging the hopper, his left hand slipped and was crushed by the hopper, resulting in a laceration to his left third digit and an amputation to the tip of his left second digit.",0
"An employee was spraying a column with fireproofing material. He slipped on the wet floor and fell on his side, suffering a broken hip. He was hospitalized.",1
"An employee was grinding on metal using a grinding disk, which came apart and injured the employee's abdomen.",1
"An employee was using a bandsaw to trim the tops off bare-root roses. The employee turned off the saw to remove debris and a blade, still moving, contacted the inside of the employee's right middle finger at the top joint. The top of the finger was medically amputated.",0
"An employee was using a crowbar to move a 5-foot by 5-foot, 1/4-inch-thick piece of plate steel. The plate slipped and struck the employee's left leg, breaking the femur and the tibia. The employee was hospitalized.",1
"On December 22, 2021, an employee was walking from a bundler to a wrapper machine when she tripped on an ergonomic mat and fell to the concrete floor. She suffered a broken left arm and a dislocated left elbow and was hospitalized.",1
"An employee was trying to keep the edge of a carpet from folding over and going through a steam press roller. His left hand and arm were pulled into the roller. He suffered crushing injuries and burns to the hand, arm, and bicep.",1
"An employee in a fuel kiosk was sitting on a stool when he fell to the floor, resulting in a head injury.",1
"An employee fell while leaving an office, striking their head on a wall and suffering a head injury.",1
"An employee was testing a new product on a roll forming mill: a metal sheet 8 1/2 feet wide and 12 feet long. The metal became stuck. The mill was reversed and the employee's right little finger was then pinched between the roll and the sheet metal, causing an amputation to the finger at the top of the knuckle.",0
An employee was cleaning mud from the drive belt of a jammed grinder when the belt turned and caught his feet against the leading edge of the grinder. He suffered a laceration to the right foot and bruising on his left foot.,1
"An employee was riding on the back of a truck. The truck's lift arm was lowered, to be flat with the truck bed, and crushed the employee's ring and middle fingers resulting in amputation and hospitalization.",1
An employee was helping roll pipes on a pipe rack. The employee's gloved left hand was caught between two joints of pipe. The thumb tip was amputated.,0
"An employee was pulling water lines in an attic when he stepped on a board that gave way. The employee fell approximately 10 feet to the floor below, resulting in a bruised lung and fractures to his vertebrae, collarbone, and rib.",1
"On December 22, 2021, an employee slipped and fell in mud in a back lot. He was hospitalized, having suffered a subdural hematoma.",1
An employee was picked up and thrown to the floor by a customer.,1
An employee was opening a garage door when it malfunctioned. His left index finger was amputated.,0
"An employee was waiting for a flange repair to be completed. There was a naphtha explosion and the employee suffered burns and a broken femur.

See also UPA 1847166",1
"Employees were changing or torquing bolts on a leaking flange. A naphtha explosion occurred, and an employee suffered third-degree burns and metal fragments in the body.

See also UPA 1847188",1
"An employee fell off a ladder in a produce cooler, landing on the floor about 7 feet below and suffering a broken left femur.",1
An employee was walking between two pallets when they tripped and fell to the concrete floor. The employee sustained head bleeding and knee injuries.,1
An employee was operating a skill saw when the saw jumped and cut his finger. The finger was reattached but was later medically amputated.,0
"An employee fell from the back of a trailer to the pavement below, breaking his right hip and arm.",1
"A door closed on an employee's finger, which was caught between the door latch and the strike plate. The employee's fingertip was amputated.",1
An employee was operating a machine when it became jammed with paper. The employee was trying to clear the jam when the machine's paper-cutting blades caused amputations to three fingers on the employee's left hand.,1
"An employee was cleaning a pellet mill die. The employee's left hand was pinched between the die and a roller, causing partial amputations to four fingers.",1
"An employee was troubleshooting the grinder/blower section of a machine. The employee's gloved right hand contacted a loose belt; the glove was caught between the belt and the pulley, and the employee's right index and middle fingertips were amputated.",0
"An employee was pulling a window from the second level of some racking while standing on a ladder. He fell from the ladder to the warehouse floor, suffering a broken right wrist.",1
"At 8:30 a.m. on December 23, 2021, an employee was unloading roof steel from a cradle, suspended from a telehandler boom. A cable became unhooked from the boom and the cradle opened up; the steel slid from the cradle, traveled about 6 feet down the roof, and pinned the employee against the chain on the lift truck. The employee suffered broken ribs and was hospitalized.",1
"An employee was holding the door to the shower room open while pushing a bench out of the way with her foot. Her hand was between the door hinges. The self-closing door closed on the employee's right little finger, resulting in amputation.",0
"An employee was standing on a ladder and trying to align a chain on a shop door roller when he lost his balance and he fell approximately 6 feet to the ground below. The employee landed on his feet, resulting in tibia and fibula fractures.",1
"A deck on a car hauler trailer was being raised. An employee's left little finger was caught in a hole, part of the locking mechanism to hold the deck in place. The fingertip was amputated.",0
"An employee was on a rolling ladder, retrieving product from an upper shelf. He lost his balance, grabbed the racking, caught his finger in it, and then fell. The racking caused an amputation to his finger.",0
An employee was putting chicken into a fryer when he began to fall forward. He put his hand on the fryer to catch himself and suffered burns to his left hand and left arm. He was hospitalized.,1
"An employee was loading cardboard into a baler. The employee's leg became entangled in the cardboard and he slipped and fell to the cement floor, suffering a hip injury.",1
"An employee was proceeding to assist with an agitated patient. While maneuvering over a counter, his shoe caught on the counter and he fell, landing on his right elbow and left wrist and breaking both.",1
"An employee was leaning forward to plug in her oxygen tank when she fell out of her chair onto the ground, resulting in a fractured hip.",1
"An employee was on a ladder on the roof of a service building, attempting to reset a boiler alarm. She lost footing on the ladder and fell approximately 12 feet to the floor below, resulting in a fractured right ankle.",1
"A paramedic  responded to an emergency call at a patient's home. The soles of the employee's shoes were wet from walking outside, causing them to slip on the linoleum floor inside the home. The employee tore his left hamstring and was hospitalized.",1
"At about 6:30 p.m. on December 25, 2021, an employee slipped on ice in a parking lot and fell, landing on their back and suffering a compound fracture to the left leg.",1
"An employee was cleaning a pellet mill when their glove was caught on the rollers and their hand was pulled into the machine. The employee's fingers were crushed by the roller, and their middle finger was amputated.",0
"On December 25, 2021 at 3:30 a.m., employee 1 was mixing a batch in a tank farm while employee 2 was transferring palm oil into a tank. While employee 2 was clearing the transfer line with steam, hot palm oil came out of the tank's conservation vent and spilled over the side. Some of the palm oil splashed on employee 1, who was located about 15 feet from the tank. Employee 1 suffered first degree burns to their arms and back and second degree burns to their neck and wrist. The employee was hospitalized.",1
An employee stepped off a forklift with his left foot and was struck by another forklift. He suffered lacerations and other injuries to the top of the foot and was hospitalized.,1
"An employee was replacing a hydraulic hose on the product finishing line. The employee walked onto the chamfering table and into a confined space next to the transferring mechanism to fix the hose. The transferring mechanism cycled and crushed the employee between it and the machine, resulting in a crushed pelvis. The chamfering table was not locked out at the time.",1
An employee was cleaning in a storage area when she tripped over an empty apparel rack and fell to the floor. The employee sustained a fractured pelvis.,1
An employee slipped on wet porch stairs while taking trash to the curb. The employee suffered a broken ankle.,1
An employee was removing tongs when the door to a tong interlock opened and crushed the employee's right thumb. The employee suffered an amputation to the thumb.,1
"An employee was removing a finished roll from a machine. When the roll was released, a metal stand pinched the employee's left leg, causing a hairline fracture to the lower leg.",1
"An employee was threading a paper winder. When the paper curled, the employee tried to straighten the paper and contacted the paper slitter, resulting in a partial amputation to their right index fingertip.",0
An employee was working on a line when his right hand was pinched between a rotating table and a guide shield. Four fingertips on the hand were amputated.,1
"An employee was operating a forklift in the warehouse and struck a pole, pinning his leg between the pole and the forklift. The employee sustained fractures to his left knee and left ankle, as well as a wound to the back of his left leg.",1
"On December 27, 2021, at approximately 1:00 AM, an employee was pouring aluminum from the melt furnace when melted aluminum splashed onto their face. The employee sustained burns around their eye socket and was hospitalized for treatment. Personal protective equipment was not worn at the time.",1
"An employee was backing a vehicle out of the shop after the brakes were worked on. The employee applied the brakes, but they did not work, causing them to strike two other vehicles in the parking lot. When the collisions occurred, the employee's chest struck the steering wheel, resulting in rib fractures.",1
An employee was changing plastic on a machine. The plastic-cutting blade engaged and amputated the tip of the employee's left ring finger.,0
"On December 27, 2021, an employee was inspecting a fire sprinkler pump at a hardware store. The pump dropped onto his right little finger, causing a compound fracture that became infected. The employee was hospitalized.",1
"At 3:00 p.m. on December 27, 2021, an employee was replacing a container on a top shelf. As she stepped off a lab counter to a step stool, she fell to the floor and suffered a broken leg. She was hospitalized.",1
"An employee was conducting a pre-trip inspection of his vehicle. He placed his left hand on the upper part of the tire and his right hand against the engine to stabilize himself, and his right hand contacted a moving fan belt. He suffered an amputation to the tip of his index finger.",0
"An employee was trying to find bolts in a machine oven with their right hand. The oven actuated and the top part of the oven moved and contacted the employee, resulting in a jaw fracture.",1
"On December 27, 2021, an employee slipped on moist grain dust while walking down the stairs. The employee stepped awkwardly to catch their self, resulting in a fractured right ankle. The employee was hospitalized, and surgery was required to repair the injury.",1
"An employee was clearing snow out of a parking area, using a mini-loader with a bucket attached. The bucket hit a water shutoff valve sticking up above the road surface; the mini-loader stopped, and the employee hit its glass front door and shattered the glass. The employee suffered a head laceration, an injured tongue, an injured sternum, broken ribs, and an injured hand.",1
An employee amputated her fingertip while operating a slicer.,0
"An employee was edging a road. A truck struck the employee, who suffered back and head injuries.",1
"At about 9:00 a.m. on December 27, 2021, an employee was feeding a scrap sheet into a grinder when their right hand was caught between a bar (which kept tension on the sheet) and the steel frame of the machine guarding. The employee suffered bruising to the hand and was hospitalized.",1
"On December 27, 2021, a temporary employee was using a cutting torch to cut metal. The gas hoses were much larger than the cutting torch fittings and the hoses were clamped onto the fitting of the cutting torch with a metal clamp allowing the hoses to leak. A flash fire occurred and the temporary employee sustained second and third degree burns over 20 percent of his body.",1
"An employee was putting away fabric when a wooden dowel rod fell. The employee tried to catch it, lost their balance, and fell on the floor sustaining a fractured hip.",1
"An employee was attaching a barge cover. The winch cable came loose and struck the employee on the left ankle, breaking it.",1
An employee was lifting a safe onto a dolly. The safe fell backward and pinned the employee's left thumb against a wall. The thumb was amputated from the tip to the bottom of the nail.,0
An employee was working at a thermoformer removing a pallet from between a roll tipper and a roll of plastic. The employee suffered a collapsed lung.,1
An employee was trying to clear a clog from an ice-resurfacing machine's auger. The auger moved and amputated the employee's right index finger above the first knuckle.,0
"A container holding television remotes was placed on its side, and an employee was handling the container to remove stuck remotes. The container shifted and crushed his right middle finger, resulting in a partial amputation.",1
"An employee was performing an overhaul of a chiller unit and lifting parts with a gantry crane. The leg of the gantry crane slipped, pinning the employee between the crane leg and an electrical panel. The employee sustained a broken lower right leg and was hospitalized for surgery.",1
"An employee was performing maintenance on a conveyor belt when their right thumb was caught between the belt and pulley, resulting in a partial amputation of the tip of their thumb.",0
"An employee was pulling a bag across a ramp and slipped on the ice. He twisted his leg, resulting in a broken fibula and tibia. The employee was hospitalized for surgery.",1
An employee was rolling a 12-inch metal band when his right index and middle fingers were caught and crushed between the rolls of metal.,1
An employee was performing maintenance work on a piece of machinery. The machine's piston activated and caused the amputation of the employee's fingertip. The machine was not locked or tagged out at the time.,1
An employee was placing a horse into a starting gate. The employee's left index finger was crushed between the horse and the metal gate. The fingertip was amputated.,0
"An employee was sheering metal when he lost footing and shifted his weight on the pedal, causing his left hand to be crushed by the clamp and bed of the machine. The employee's left index finger was amputated at the first knuckle, his left middle finger was amputated at the second knuckle, and his ring and little fingers were crushed.",1
"An employee was helping during work with plastic film heated to about 320 degrees Fahrenheit. The material wrapped around his forearm and palm, causing second-degree burns to the forearm and a small third-degree burn to the palm. He was hospitalized, requiring a skin graft.",1
An employee was driving a vehicle on a security patrol and struck a parked semi-truck. He suffered a broken right femur.,1
"Two employees were talking in a parking lot. A truck driver, with whom one of the employees had argued earlier, persuaded that employee to go with him to his truck. The driver then picked up a baseball bat and beat the employee, who suffered a broken arm.",1
An employee was clearing a jam from a machine. The machine's serrated blade partially amputated the employee's right thumb.,0
"On December 28, 2021, an employee was struck by a load of materials that slid off a pallet on a passing forklift. The employee suffered a broken elbow.",1
"An employee fell while walking. The employee's head struck the ground, causing a contusion.",1
"An employee was washing a floor down with a hose. An empty metal container struck the employee in the head, causing a head injury.",1
"An employee was feeding wire into a wire cutter machine. The machine was engaged while his left hand was in the machine; the press came down, cutting him deeply and breaking three fingers. He was hospitalized, requiring surgery for the finger injuries.",1
"Employees were removing unions from pipe in a boiler room. One employee was holding a ladder for another employee. One of the unions had loosened through many cycles of heating and cooling, though the employees had not touched it yet; it failed to hold the weight of an 18-inch length of 2-inch pipe, which fell onto the first employee's head. The employee suffered a severe head laceration.",1
"A maintenance employee was working on a breaker when their right middle fingertip was pinched by a spring mechanism, resulting in amputation.",0
An employee was troubleshooting a bean cutting machine and amputated multiple fingers.,0
An employee dropped off a client in a parking lot. She slipped and fell in the lot after exiting her car. The employee sustained a broken tooth and contusions.,1
"An employee was cleaning sand off the rollover stop block on a molding machine. His right middle fingertip was crushed, necessitating a surgical amputation.",0
"An employee was unloading a truck at the loading dock. The employee lost consciousness after the truck pulled away and fell off the loading dock to the concrete below, resulting in an arm fracture.",1
"An employee was trying to change a drill bit. The drill activated while his right hand was on the drill bit, causing the drill to turn and partially amputate his right little finger.",1
"An employee was closing a chain link gate when their finger was caught between the gate rail and the roller. The employee's thumb was crushed, and their thumb was medically amputated at the tip.",0
An employee was stepping into the cab of a delivery truck and tore their right thigh muscle.,1
An employee was working at a framing machine. The employee's fingertip was caught and broken in a clamp.,1
"An employee was walking into a hangar when they slipped on a wet floor, causing them to fall and hit their head. The employee sustained a head laceration.",1
An employee was on the ground working on a de-energized-by-design pole guy wire. The guy wire became energized by an overhead electric source. The employee sustained electric burns to their left hand and right knee and was hospitalized for treatment.,1
"An employee was helping to manually rotate a drive belt/pulley system on the delinting centrifuge. The employee's finger was caught and pinched between the belt and the pulley. The employee pulled his hand out, resulting in a degloving of a portion of his left ring finger and a fingertip amputation.",0
"An employee was holding the pump hose assembly, distributing concrete into forms. One of the four outriggers of the pump truck shifted, causing the hose to strike the employee's foot. The employee's foot was fractured.",1
"A compressed air hose in the back of a yard truck was connected to a trailer. As an employee pulled the yard truck away from the trailer, the quick disconnect in the hose failed. The pressurized hose hit an employee's leg, lacerating it and tearing the calf muscle.",1
"An employee was loading pallets onto a box truck to deliver. As a pallet was being shrink wrapped, the employee stepped backward and tripped because his foot was caught between the truck and the lift gate. He fell backward approximately 4 feet to the floor, resulting in a left arm fracture and bruised ribs.",1
"An employee was attempting to remove a plastic bag from inside a piece of equipment. A small serpentine belt inside of the unit activated, pulling her sleeve and right arm into the machine. The employee sustained a fracture and a laceration to her lower right arm.",1
"An employee was backing a telehandler onto a flatbed delivery trailer. The telehandler fell off the trailer and landed on its side on the asphalt about 3 feet below. The employee suffered a head laceration and several broken ribs, both on the right side of his body.",1
"On December 29, 2022, an employee was trying to put a linkage pin in on the roll of a rim line. The linkage arm slipped and dropped, hitting his left middle finger. He suffered a partial amputation at the knuckle below the fingernail.",0
"An employee was on a ladder, cutting black iron with a bandsaw. The saw jumped and cut his left index finger (between the hand and the middle knuckle) to the bone. He was hospitalized and underwent surgery.",1
"An employee was manipulating a 3-foot tall industrial warehouse rolling gate to determine why it was squeaking during operation. The gate fell over and struck the employee's left leg, causing him to fall off a loading dock and hit his head on the ground. The employee sustained brain injuries, three cranial fractures, a left leg fracture, and rib fractures.",1
"An employee was working to remove a metal straightener roll from a finishing line. The team was using a lifting device with an overhead crane to remove the 850-pound rolls from the machine. The roll fell from the lifting device and rolled onto the employee's foot, causing fractures to his right foot.",1
An employee was looking under the hood of a vehicle. The employee came into contact with a running belt and suffered a potential left middle finger amputation.,1
"An employee was trying to dislodge fragments of glass from the conveyor of an insulated glass machine. The machine caught his left glove, causing the amputation of a fingertip.",0
"An employee was under a trailer, looking for damage or loose parts in its walking floor mechanism. The walking floor was engaged while the employee's right hand was on a stationary cross-member. Their hand was caught between the stationary member and the member that moved the floor. The top of the hand was crushed resulting in injury to the whole hand, except the thumb.",1
"A temporary employee had finished cleaning three chains that ran under a conveyor belt. As the employee was trying to realign a chain, the machine was powered up and the chain moved. The employee suffered a pad amputation to the left index finger, a fracture to the first joint on the left index finger, and a laceration to the middle finger.",0
"An employee was standing on the base of a mobile scaffold. His left arm was wrapped through the ladder's vertical retracting supports, which he was hitting with a hammer in an attempt to free the ladder. The ladder abruptly retracted downward and broke his arm.",1
"On December 29, 2021, an employee lost his balance and fell down one flight of stairs, resulting in a hospitalization.",1
"An employee was climbing down an 8-foot ladder. The employee twisted and fell at the bottom step, landing on the floor and suffering a broken right leg.",1
A driver became dehydrated in a truck and was hospitalized.,1
"An employee was doing housekeeping in an emergency department patient's room. After mopping the floor, he slipped and fell, landing on the floor and breaking his right hip.",1
"An employee was descending  a ladder when they missed the second-to-last step and fell to the ground, resulting in a broken hip.",1
"An employee was seating an intermodal onto a chassis when their little finger was caught in a pinch point, resulting in amputation.",0
"An employee was walking through the parking lot to his vehicle at the end of a work day. He slipped on ice, fell, and hit his head on the ground, resulting in brain bleeding.",1
"An employee was shutting off a furnace when residual gases in the furnace ignited, causing burns to their face, neck, and left arm.",1
An employee was trying to adjust a panning belt. His right index finger was under the belt when it pulled in the fingertip. The fingertip was amputated between the belt and the nose roller.,0
"On December 30, 2021, between 5:00 PM and 7:00 PM, an employee was using mold-killing chemicals to clean the ceiling of a crawl space. The chemicals dripped from the employee's sponge onto the employee's arms and chest, causing first- and second-degree chemical burns.",1
"An employee was walking to his car on his lunch break when he tripped, fell, and hit his head on a building wall. The employee sustained a concussion, a laceration, an abrasion, and swelling on his head and eye area.",1
"An employee was helping close an automatic gate. The gate pinched the employee's left index finger, causing a partial amputation.",1
An employee fell off a loading dock while moving to open a roll-up door. The employee suffered fractures to the right fibula and ankle.,1
"A postal service employee was delivering mail at a customer's home when he fell on the walkway, resulting in a broken right hip.",1
"An employee was helping a forklift operator move a large, steel c-channel. The c-channel slipped off the forklift and pinched the employee's left little finger between the c-channel and the fabrication that was being completed, resulting in amputation.",0
"An employee was using a forklift to lift and empty a garbage hopper into a larger trash bin. As he released the hopper to tilt into the bin, his finger was caught between the top part of the hopper and it's frame, resulting in a partial amputation.",0
An employee was operating a forklift when a flatbed truck drove toward it. The employee's right hand was caught between the forklift's rear cab and the front end of the flatbed. The employee suffered an amputation to the ring finger.,1
An employee tripped and twisted his ankle while stepping down from a machine. He suffered a displaced fracture to the right fibula and a sprained ligament in the right ankle.,1
"An employee was working in a steel pipe yard rolling pipe joints to collect information from mill stencils. As the employee was rolling a pipe joint, three other sections of pipe rolled against the joint. The employee's left little finger was crushed between the pipe wrench and the pipe joint, resulting in a 1-inch amputation to their finger.",0
A hopper lid pinched an employee's left ring fingertip as he closed it. The fingertip was amputated in front of the fingernail.,0
"An employee arrived at a job site, parked his truck behind a motor grader, and got out of the truck. He was then struck by the grader as it backed up. Its tires rolled over him, breaking his left leg and his pelvis.",1
"An employee was helping to place a steel pipe on a pipe rack when it slid off of the forklift and struck their left toe, resulting in a fracture.",1
"An employee was installing light fixtures while standing on an 8-foot step ladder. While stripping a 12 AWG (American wire gauge) conductor, he was shocked, causing him to fall and hit his head on the concrete floor. The employee sustained a laceration to his forehead; a concussion; and orbital, sinus, and forehead fractures.",1
"An employee was on a ladder hanging balloons. The ladder slipped and he fell about 14 feet, suffering face fractures and an arm fracture.",1
"An employee became lightheaded while bagging groceries. The employee turned, tripped, and fell to the floor, suffering a lower back fracture.",1
"An employee was attempting to fix a piece of equipment. The machine has a drop table with a vinyl belt that catches product from overhead slings and feeds the product, gowns, to the employees so they can pull it off and feed it to the folders. Three employee's attempted to fix a broken belt. As the employees were trying to roll the belt up on the roller, one of the employee's arms got caught in the roller resulting in a fractured forearm.",1
"An employee was warming a seized line with a torch. A pinhole opening sprayed the employee with nylon, burning the employee's face and arm.",1
"An employee was changing out tong heads and attempting to place a retaining pin. The lever and gear rolled over and crushed the employee's left thumb, resulting in amputation.",0
"An employee was chopping vegetables with a heavy cutting knife when the knife contacted the tip of his left thumb, resulting in a partial amputation.",0
"An employee locked out a stacker machine to begin repairs. The employee noticed a piece of metal was jammed in the equipment and attempted to remove the piece of metal. When the piece of metal was removed, an arm on the equipment dropped down due to gravity and pinned the employee's left arm against the frame of the equipment. The employee suffered a crush injury with potential tissue damage.",1
"Employees were replacing low batteries on a wind turbine. They replaced two battery racks, replaced the covers, and attempted to start the tower. The tower then faulted on a faulty pitch master, so they replaced the pitch master. They then started preparing to program the pitch master when the entire battery rack exploded, creating a large bang and flash and throwing the cover across the hub, striking the injured employee in the back. The employee suffered three fractured vertebrae in their lower back.",1
"On January 1, 2022, an employee was troubleshooting a bander machine. The machine's cutting sequence began while his right index finger was in the cutting area, and his finger was pinched between the slide plate and the stop plate. He suffered a partial amputation to the fingertip.",1
"On Saturday, January 1, 2022,  an employee was injured after being struck by the butt end of a utility pole that was being lifted from a pile of poles in the yard. The employee had climbed up onto a pile of poles in order to set the tongs from the derrick onto a pole for picking. The employee set the tongs in the approximate middle of the pole for weight balance and came down off of the pile. The derrick operator lifted the pole slightly and found it not balanced. The employee then went back onto the pile to adjust the tongs. He then came down off the pile again. At this time, the pole was jarred or came loose from the pile and struck him while he was the ground. He sustained six broken ribs and a punctured lung.",1
"An employee was examining a patient room. She turned around and tripped over a wheelchair, fell to the ground and fractured a hip.",1
"An employee was cleaning a horse stall. The horse got spooked by a pitchfork that dropped and kicked the employee several times, resulting in fractured ribs.",1
"While letting a client into the building, an employee caught her foot on an entry mat and fell, landing on her back and resulting in a cracked vertebra.",1
"An employee was changing out a motor. While it was being removed, the motor shifted and pinched fingertips on the employee's left hand. The employee suffered partial amputations to the last joints of the ring and middle fingers.",1
"Employees were moving a 6-foot electrical cabinet with a hand truck. When the hand truck was tipped back, it became unstable and fell on an employee, who suffered fractures to vertebrae, the pelvis, and the tailbone.",1
"On January 3, 2022, an employee was standing near a push cart containing doors. The cart was moved, and the doors fell from it and broke the employee's leg.",1
"An employee was sealing medical products in a plastic pouch. While leveling the plastic pouch into the sealer bar, the employee hit the foot pedal to close the sealer bar causing the bar to catch her finger between both bars. The employee pulled on her finger, resulting in a partial amputation.",0
"An employee was crossing a freight lot when they were struck by a semi-trailer that was entering the lot, resulting in a possible leg injury.",1
"An employee was attempting to start up a plastic blow molder machine. During startup, the employee removed molten plastic from the die head. While reaching for the molten plastic, the employee's left hand was caught between two mold halves, resulting in the amputation of their left thumb and index finger.",0
"When an employee opened a truck door, the truck shifted and the employee fell to the ground, resulting in an injured right ankle and foot.",1
"An employee was caught between pieces of drilling equipment (ST-80 and mast leg) while making a connection on the rig floor, resulting in a lacerated liver.",1
"An employee was turning on a pallet wrapper when he fell and hit his face against the gate of the pallet wrapper, resulting in a facial/skull fracture.",1
"An employee was crossing the parking lot when they slipped on ice, fell and hit their head on the pavement. The employee was hospitalized.",1
An employee lost their balance on ice while stepping out of a vehicle in a parking lot. The employee fell and suffered a broken right hip.,1
"An employee was walking on a campus sidewalk ramp when she tripped and fell to the ground, resulting in a broken bone.",1
"An employee was struck by a car in parking lot. The employee suffered a left arm fracture, a left wrist dislocation, and a hip injury and was hospitalized, possibly requiring surgery.",1
"An employee was working on a ladder to demolish a pipe when the pipe swung and hit the ladder, causing the employee to fall and suffer a head injury.",1
"An employee was utilizing a forklift in the shipping area when they fell approximately three feet to the floor when reaching out to close a door. The employee suffered a severe laceration to the face, broken facial bones, and a separated shoulder.",1
An employee was clearing a jam in a salt machine. The machine caused a partial amputation (without bone loss) to one of the employee's fingertips.,1
"An employee was opening a roll-off container door. The door struck the employee, who suffered three broken ribs, a facial abrasion, and a foot injury. The employee was hospitalized.",1
"An employee was trying to connect a cargo box to a railcar when a crane operator moved the cargo box and it pinched the employee's right index finger, resulting in an amputation.",0
An employee slipped on an ice patch while exiting a semi truck. The employee fell and suffered a broken left hip.,1
"An employee was using a cable winch to unhook a cable from a dumpster when their finger became caught, resulting in a fingertip amputation.",1
"An employee was working on a step ladder 6 feet off the ground to drill a hole in the ceiling for a pipe hanger. The ladder began to move under the employee and he fell to the ground, resulting in fractured ribs and an injured right knee.",1
"An employee was climbing down into a vault when they grabbed onto some doors on the vault and the doors gave way, causing the employee to fall at least 20 feet to the bottom of the vault, which had capped rebar on it. The employee suffered broken ribs and a broken sternum.",1
"An employee was working from a ladder when they fell onto the lid of a running screw conveyor that was not bolted down. The lid was knocked out of the way as the employee fell onto the screw conveyor, causing the employee to contact the conveyor and resulting in a leg amputation below the knee.",0
"A trailer was moved to reposition itself while the doors were open. An employee was behind the trailer when product on the trailer fell onto him, knocking him to the ground. The employee suffered a hairline neck fracture and intracranial hemorrhage.",1
"An employee slipped on a wet floor in a production room. He fell, twisting, and landed on his hip. He suffered a broken right lower leg and was hospitalized.",1
"An employee was running a drill line machine. It caught a moving part and the employee's glove, and pulled in the employee's right hand. The employee suffered fractures to the hand and wrist.",1
"An employee was guiding material from a saw onto a feed-out table when their right thumb was caught between the material and a guide pin, resulting in a partial amputation of 3/8 of the tip of their right thumb.",0
"An employee was clearing a jam in a press roller when their right hand became caught in the roller, resulting in crush injuries to their middle, ring, and little fingers. The machine was not guarded at the time.",1
"An employee was showing a new home to potential buyers and was crossing the street. The employee stepped on a piece of gravel, slipped, and fell. The employee broke both feet.",1
"An employee was unloading 50 percent caustic soda from a trailer. When he disconnected the 2.5-inch discharge hose, the product began to spray from the trailer's discharge piping and splashed inside his face shield, causing chemical burns to the side of his face, eyes, and lips.",1
"An employee was placing material on an overhead crane to be lifted to a saw when the material slipped and crushed the employee's right hand, resulting in an index finger amputation.",0
Two chemicals were mixed together and produced vapors; the employee inhaled them and suffered breathing problems.,1
"An employee was walking to deliver documents to a different part of the office when they tripped on a floor mat and fell, resulting in a broken leg.",1
"An employee was on a job site to repair a residential water line. The employee was looking inside a ditch from above when an excavator bucket hit him, causing him to fall backward off a retaining wall and land on his chest and shoulder. The employee suffered injuries to his ribs, lung, and shoulder.",1
"On 1/4/2022 at 11:55 p.m., an employee completed the plating of the second side of a floor truss while working as an assembler on a floor line. The employee reached toward the top plate of an assembler to correct an alignment issue when the assembler actuated the air valve and closed the jig. The employee's gloved left hand was on top of the truss and the jig rail closed on his index and middle fingertips, resulting in amputations.",0
"An employee was on a delivery truck, rigging bridge beams to be unloaded. The employee was on a beam, connecting the shackle of the rigging to the beam, when the beam and the employee's left ring finger were caught between the 35-ton shackle and the lifting eye. The finger was crushed from the fingertip to the first knuckle.",1
"An employee was checking a stranding machine that kept lighting up red, indicating an issue with the wire path. He wanted to see if the red light would come back on after he moved some wires around. He indicated he jogged the machine and the red light came on, so he moved the other detector and jogged the machine once again. He then checked the main speed reducer belt while jogging the machine. His glove caught on the belt teeth and pulled his left hand toward the pulley, resulting in a partial amputation of the third finger and a degloving of the fourth finger.",0
"An employee was operating a mill. After making a cut, he reached for piece of rubber that had fallen into the mill tray. The rubber was stuck and the employee's right hand was pulled under the stationary mill knife blade, resulting in a laceration to the wrist that required surgery.",1
"An employee was packaging birdseed when a piece of poly got stuck inside the machine. The employee attempted to clear the piece off the machine when a pulley on the machine contacted their right index finger, resulting in a fingertip amputation. The machine was not locked out/tagged out at the time of the incident.",0
"Two employees were installing 15-inch PIPP liner in an outside storm drain. In order to adhere the liner to the pipe, hot water is run through the pipe from the back of the truck. The employees attempted to disengage the temporary tubing from the back of the truck when it ripped and sprayed hot water toward one of the employees, resulting in second degree burns to their legs that required hospitalization.",1
An employee was cleaning a piece of equipment close to a conveyor system when their hand slipped and went into the conveyor system. The employee suffered an amputation of the distal portion of their right index finger.,0
"An employee was lowering an empty sludge tray into a tub on an annealing and pickle line. The tray reacted with the heated solution in the tub. Solution left the tub and contacted the employee's legs, burning them.",1
"An employee was in a trench box next to an excavator spreader removing and replacing a sewage pipe. His right hand was on top of the trench box spreader bar when his thumb was partially crushed by the excavator bucket, resulting in amputation of the thumb tip.",1
"An employee was walking through a doorway when he tripped over the metal threshold of the door and fell to the floor, resulting in a bilateral pelvic fracture.",1
"An employee was making sandwiches on an assembly line. The employee accidentally hit the ventilation button system for the fryers, which closed the vents and filled the area with smoke. The employee was admitted to the hospital for smoke inhalation.",1
"An employee was attempting to clear some material in a hopper and braced himself on a rotary airlock when his right index finger contacted the machine, resulting in a fingertip amputation.",0
"An employee was installing a lower lot hatch cover in the lock out trunk area inside a submarine. The employee attempted to insert the top bolt through the yoke and hatch. When the bolt was not aligning correctly, the employee tried to adjust it. The bolt moved and the employee's left index finger traveled upward as the alignment of the hatch shifted. The hatch contacted the employee's finger, resulting in amputation at the first knuckle.",0
"An employee was using an overhead crane with a 5-ton capacity to load a bundle of seven stone slabs, weighing about 5,000 pounds, onto an A-frame flatbed trailer. The employee began to remove the load straps. Once they were removed from one side, the load began to fall toward the employee and pushed him off the truck deck to the concrete landing about 4 feet below. His right hip and shoulder struck the ground and he suffered a broken right femur.",1
An employee slipped on ice while walking into work. The employee fell to the ground and suffered a broken left knee.,1
"An employee was using compressed air to open a butterfly valve. When the air stopped, the valve closed on the employee's thumb and amputated the tip.",0
An employee was moving a chock to center it behind an aircraft tire. The aircraft moved back and its tire pinched his left thumb against the chock. He suffered a partial amputation to the thumb tip.,0
An employee was stabbed in the neck with a knife by a shoplifter.,1
"A temporary employee was operating a stand-up tugger inside an assembly shop. As the tugger made a right turn, the employee fell to the floor. The employee suffered a laceration to the left side of the head, with a subarachnoid bleed/subdural hematoma, and was hospitalized.",1
"An employee was loading a skid holding 947 pounds of sheet metal onto a 40-foot flatbed trailer using a sheet lifter attached to an overhead crane. Standing on the platform of a loading ladder at the middle of the trailer, the employee began to operate the overhead crane. The sheet lifter hit the edge of the loading ladder and tipped it over. The employee fell with the ladder, holding onto it, and struck the back of his head on the ground. He suffered a concussion and was hospitalized.",1
"An employee attempted to pull down a delivery truck's roller door. The employee adjusted his foot position on the rear platform of the truck when he fell and landed on the parking lot, resulting in a fractured hip.",1
"An employee was visiting a work site to review progress when he slipped on ice, fell, and hit his head. The employee was hospitalized.",1
"An employee was walking across the shop floor when they tripped on an uneven grate in the floor drain system and fell to the floor on their right side. The employee was hospitalized for a fractured right femur, requiring surgery.",1
"An employee attempted to pull a piece of lumber off of the lumber production line. As the employee pressed a button on the machine, his hand was pinched between the lumber and a part of the machine. The employee suffered a partial amputation of his right index finger. The machine was unguarded at the time.",0
"A mini excavator backed into an employee, breaking his left tibia and fibula and dislocating his right knee. He was hospitalized.",1
"An employee was using a hammer to adjust a 4-by-4 square steel block that a metal skid was sitting on. The block slid out from under the skid, and the skid cut the tip of his left middle finger. The fingertip was amputated.",0
"An employee was preparing a metal mortar mixing tub (on the forks of a forklift) for transportation by turning the stabilizing feet inward. One of the front feet became stuck. Another employee tried to tilt the forks of the lift downward to help the employee turn the foot; the tub slid off the forks, striking the employee and fracturing his pelvis.",1
"An employee was feeding wet grain into an auger. The auger caught the employee's left hand, lacerating it and breaking bones.",1
An employee's hand was pulled into a rotating chain and pulley while they were operating a material conveyor to move mushroom soil. The employee sustained an amputation and severe lacerations to the fingers on their left hand.,1
"An employee was operating a conveyor to load and fill mushroom beds. The employee placed his gloved left hand on the bottom of a belt drive guard when the glove was pulled into the backside of the belt and pulley, resulting in the amputation of his pinky finger and damage to his ring and middle fingers.",1
"An employee was constructing a hitch. The employee was about to attach a steel plate, which was on end supported by a piece of wood; the employee's left hand was on the hitch. The plate fell, and the employee's left thumb was crushed between the wood block and the hitch.",1
"An employee slipped on ice between two buildings and fell, landing on an icy curb and suffering a broken right ankle. The employee was hospitalized, requiring surgery.",1
"An employee was operating a pallet jack, which went out of control as the employee tried to insert its forks into a pallet. The employee's right foot was caught between the pallet jack and the pallet, and the employee's ankle was broken.",1
An employee was clearing a jam in a box strapper machine. His left index finger was caught in the chain sprocket on the underside of the machine. He suffered an amputation to the fingertip.,0
An employee was troubleshooting a conveyor when his arm was caught between its rolls. He suffered a torn muscle and nerve inflammation in the arm.,1
"On January 6, 2022, an employee was operating a nail gun when a nail struck his right foot, causing a puncture wound.",1
"An employee tripped on a low cart (30 by 30 inches, 11 inches tall) and fell in an aisle. The employee suffered a broken hip.",1
"On January 6, 2022, two employees accessed the top of a series of rail cars to open the lids in preparation for loading the next day. Due to extremely cold and snowy conditions, the rail car lids were frozen shut. One of the employees fell approximately 14 feet to the frozen ground below, resulting in two broken ankles and hospitalization. Fall protection was not used at the time.",1
"An employee tripped and fell while retrieving a pallet from its pick location. She struck a steel rack and suffered a deep laceration to the left arm. She was hospitalized, requiring surgery.",1
"An employee was helping adjust a servo for hydroelectric equipment in preparation for servicing. The component shifted and crushed the employee's left middle finger, causing multiple fractures.",1
"An employee was on a snowy, icy roof checking for a leak. The employee slipped and fell on the roof, suffering a  broken rib and a collapsed lung.",1
"An employee's hand was caught in a  door jamb, which amputated the employee's fingertip.",1
An employee developed frostbite on his hands while shoveling snow.,1
"An employee was repositioning a dock plate on a conveyor. The 2,000-pound plate fell on his foot and crushed it. He was hospitalized, requiring surgery.",1
"An employee had finished operating a farm tractor. When he opened the tractor door, a gust of wind caught the door and caused the employee to fall to the ground, resulting in a broken left femur.",1
"An employee was pushing a cow femur into a bandsaw to cut out a beef shank piece. The saw hesitated and the employee stopped pushing; the saw started back up, and as the employee pushed the bone, the blade contacted the employee's right thumb and amputated the tip.",0
"On January 6, 2022, a temporary employee pushed a conveyor to a different section, as part of a changeover. He then pushed a table out behind a wall, and came out from behind the wall. He was then struck by a forklift and sustained fractures to both feet.",1
"An employee was filling a cylinder on a robot packaging machine. A spinning metal part of the machine pinched the employee's left ring finger, causing the amputation of the fingertip. The machine was unguarded at the time.",0
"An employee was on a landing above a frac tank. The employee put a strap stick into the tank; when it hit the bottom of the tank, the fluids in the tank ignited. The flash fire caused the employee to jump or fall, and he suffered two broken legs as well as burns to the arm.",1
An employee was trying to align steel coils with the entry point of an end welder. The employee's right hand was caught between a steel coil and the adjustment screw at the entry point of the machine. The employee suffered a puncture and a fracture to the hand.,1
"An employee was clearing a jam on a pre-form wheel. The employee's left hand became stuck between the wheel and a metal piece used to feed material, causing the amputation of the index finger.",0
"At about 8:40 p.m., two employees (a groundsman and a switchman) were working in a rail yard, setting rail cars to be released from the site. The groundsman was watching the switchman connect an end-of-train device on the string of rail cars. While he was on the adjacent track, a locomotive on that track moved forward and struck him, knocking him over, injuring his right foot, and amputating his left leg above the knee.",1
"Employee 1 was using a forklift to unload engines and transmissions from a truck. The forklift couldn't get to the engines into the back of the truck, so employee 2 moved the engines to the edge of the truck with a pallet jack. Employee 1 reached to grab the pallet while employee 2 pushed with the pallet jack. When the pallet hit the sheet metal strip of the truck, the engine shifted onto employee 1's finger, resulting in a partial amputation.",0
"An employee was moving rolls of landscaping hay on a flatbed. The employee fell off the flatbed to the ground, suffering a head injury.",1
"An employee was operating a roll form machine and attempted to remove glue from one of the rollers using a rag. The rollers caught the rag, causing the fingers on the employee's right hand to be pulled into the roller and crushed resulting in a partial amputation to the ring finger. The machine was locked out/tagged out at the time.",0
"An employee was skiing to transport supplies. He slid on smooth firm snow and struck a tree, suffering a broken lower right leg.",1
"A crew had just installed lightning arresters on a de-energized distribution line. When they energized the line, they realized that one lightning arrester needed adjustment. A lineman went up in a bucket to adjust it. When he tried to loosen its bolts, an arc flash occurred between the bolts and his impact wrench. He suffered second-degree burns to both hands and forearms.",1
"A vehicle struck a letter carrier while he was delivering mail. He suffered broken ribs and legs and was hospitalized, requiring surgery.",1
"An employee was performing maintenance on a spiral conveyor. As the employee cleaned excess lubricant away with a rag, the chain on the conveyor caught the rag and pulled in the employee's right hand. The employee suffered an amputation to the middle finger.",0
"An employee was replenishing trays of finished product using an order picker truck. As he was moving toward the end of a narrow aisle, his right index finger was pinched between the outside anchor bar/overhead guard and the bottom of the overhead crossover bars that connected and stabilized the racking in the aisle. He suffered a fracture and an amputation to the tip of the finger.",0
"An employee was skiing to the base of a mountain. He turned to stop and his right ski went directly into a mogul, causing him to fall and suffer a broken right tibia and fibula.",1
"An employee was on a scaffold, pumping cement in cinder blocks. The employee fell from the scaffold platform boards to the ground 28 feet below, suffering a broken collarbone and ribs.",1
An employee had just dropped off a pallet of shingles using a forklift. He was getting out of the forklift when it rolled and pinned him against the pallet. He suffered a broken pelvis.,1
"An employee was hooking a welder gun into a feeding wire. The feeder caught the employee's right thumb, which was amputated. The employee was hospitalized.",1
"An employee was placing a 4-by-4 under a pallet to prepare it for being lifted by a forklift. He tripped over the 4-by-4 and fell, suffering a dislocated right shoulder. He was hospitalized.",1
"An employee was operating equipment when a piece of bar got stuck in the rolls. He used another piece of bar to dislodge it. The bar was caught, creating a pinch point between the roll and the bar and resulting in amputation of the employee's left ring finger.",0
Two employees were strapping down pallets on a truck. One of them fell from the truck to the ground and suffered a broken hip.,1
"An employee was operating a milling machine when they touched the rotating tooling, causing their glove to be pulled into the machine. The employee sustained a finger amputation.",0
"An employee was loading a piece of sheet metal onto a shear. The material clamping device came down on the employee's left middle finger, causing the amputation of the fingertip and the fingernail.",0
"An employee had just changed a bandsaw blade and was using the bandsaw to cut a part. His right hand contacted the ""return"" side of the blade, causing a deep laceration to the top right part of the hand near the knuckles of his ring and little fingers. He was hospitalized, undergoing surgery.",1
"An employee slipped on a floor, which was wet from snow, and fell. The employee suffered a broken hip.",1
"An employee was removing debris from a machine roller when his right hand got pulled between two larger rollers, resulting in crush injuries to his right fingers, hand, and forearm.",1
An employee was removing nuts from a pump unit. The employee slipped and their right index fingertip was crushed between the pump and a rachet. The fingertip was amputated.,0
An employee tripped over a step near a palletizing machine and fell. The employee was hospitalized for a broken hip.,1
"An employee was cutting a piece of wood with a saw. The wood jammed and the blade caught the employee's hand, amputating half of the left thumb nail.",1
"An employee was standing on a stepladder, putting up cushion elevator pads. The employee fell from the stepladder to the floor of the elevator. She landed on her left side and suffered a dislocated left elbow, along with a fracture and a dislocated jaw.",1
An employee was retrieving a foreign object from a snowblower. The snowblower's blades severely lacerated four fingers on the employee's right hand.,1
"An employee lost his balance while walking, fell to the ground, and suffered a deep laceration to the knee. The employee was hospitalized.",1
An employee was patching an overhead air duct from the third step of an 8-foot portable stepladder. The employee fell to the concrete floor and suffered a compound fracture to the left leg.,1
"The first knuckle on an employee's left ring finger was pinched, resulting in an amputation.",1
"An employee was lying on his right side, using a torch, when sparks from the torch ignited his clothing. He suffered burns to the right side of his torso, chest, and back. He was hospitalized.",1
"An employee was exiting a room, slipped or tripped, and fell to the floor. The employee sustained a broken femur.",1
An employee was feeding a part into the die of a partial-revolution mechanical power press. The press cycled and amputated the employee's left index finger.,0
"Employees were removing an air compressor from service. When the air hose was released, pressure still in the line caused the coupling to fail and propel the hose downward. It struck an employee's lower right leg and hand, breaking the leg and the thumb. The employee was hospitalized, requiring surgery to the leg.",1
"An employee was walking around the back of his truck when he slipped on ice and fell to the ground, breaking a hip.",1
"An employee climbed approximately 10 feet up an extension ladder when the bottom of the ladder kicked out. As the employee fell, their left foot got caught on a rung and the ladder fell on their foot, resulting in a broken ankle and fractured fibula.",1
An employee was stocking merchandise when she fell.,1
"At about 12:30 p.m. on January 8, 2022, an employee slipped and fell in a parking lot, landing on the ground and suffering a broken vertebra. The employee was hospitalized.",1
"An employee was on a rolling staircase, reaching for product on a shelf. He lost his balance and fell about 8 feet to the floor, suffering broken ribs.",1
"While delivering mail, an employee fell from a dock lift to the concrete 3 feet below. The employee suffered a broken knee that required surgery.",1
"An employee was trying to clear a jam from a side-matcher machine. The machine's bottom head was still in motion, and its rotating knives amputated the employee's left little finger and lacerated his left ring finger. The employee was hospitalized, and the ring finger was medically amputated.",1
"An employee was cleaning an area. While the employee was shoveling under a material belt, the tail pulley of a conveyor caught the employee's right arm. The employee's lower arm was amputated.",1
"At about 10:00 p.m. on January 8, 2022, an employee was adjusting a conveyor belt when his right ring finger was caught in a pinch point. He was hospitalized, needing a skin graft to the fingertip.",1
"An employee was tearing down a vacuum stuffer at the end of a shift. As he tried to lower the hopper on top of the stuffer, the lid slammed shut on his left hand and severely lacerated it. He was hospitalized, undergoing surgery to the hand.",1
"An employee was clearing ice on top of a drilling rig doghouse landing. Hinges broke when the employee jumped to clear the ice, and the employee fell to the ground 20-plus feet below. The employee suffered fractures to the lumbar region, wrist, and ankle.",1
"An employee was working from a ladder, hanging a mirror. The employee fell off the ladder onto a chair and suffered six broken ribs.",1
"An employee was descending the stairs to the engine room of a ship. He slipped on an oil hose, fell into the railing, and suffered a sprained left ankle.",1
An employee was trying to clean cotton from a lint cleaner to find the source of a fire in the lint cleaner. The machine's lint saws amputated his left hand.,0
An employee missed a step and fell while descending from the back of a tractor. The step lacerated his upper left leg area and he was hospitalized.,1
An employee slipped on ice while walking down the front steps of a building. The employee suffered a broken foot.,1
"An employee lost balance while stepping back from a line, fell, and suffered a broken hip.",1
"An employee was operating a wire rope cutter. As he tried to remove a wire spool, his finger was caught in a pinch point. An arm (which held the wire reel on the machine) amputated his fingertip.",0
"A truck driver was stepping out of his truck at a local fuel center when his foot slipped on the steps, causing him to fall to the ground. The employee sustained broken ribs.",1
"An employee was helping a driver tighten down a load on a truck. A wooden 2-by-4 struck the employee's left ring finger, causing an open displaced fracture.  The finger was medically amputated from the third knuckle up.",0
"An employee slipped on snow-covered ice in a parking lot and fell. He suffered a broken left ankle and was hospitalized, requiring surgery.",1
"An employee was shot during a convenience store robbery, suffering abdominal injuries.",1
"An employee was walking out of a break room. A tire, dropped from above, struck and injured the employee. The employee was hospitalized for contusions to multiple body parts.",1
"An employee was beginning to pump milk to his tanker truck. He noticed that the belt on the motor at the back of the truck that ran the pump had slipped. He was trying to reposition it with his left hand when the motor started. The belt caught his left index finger, causing an amputation at the first knuckle.",0
"An employee was trying to remove a blockage from a chicken feed auger. The auger activated while his right hand was in the machine, and the hand was amputated.",0
"An employee was cutting through a 2-inch orange tree with a chainsaw. The saw hit a vine and went out of control, lacerating the employee's right leg. The employee was hospitalized and underwent surgery.",1
"An employee was removing Christmas lights while on a ladder. He suffered a seizure and fell 6 feet from the ladder to the sidewalk, sustaining a head injury and breaking a bone above the left eye.",1
"An employee slipped on an icy sidewalk and fell, resulting in hospitalization for a broken right hip.",1
"On January 10, 2022, an employee was driving a semi trailer toward a dock door. During a 90-degree turn, the trailer tipped onto its passenger side and struck a power pole. The employee fell to the passenger-side door, suffering a broken collarbone and three broken ribs.",1
"An employee had been climbing a tree at a work site to do branch removal. The employee fell to the ground and sustained fractures to the hips, elbow, and wrist.",1
"An employee was on a roof, making leak repairs. The employee fell through a skylight to the concrete floor, about 20 feet below, and suffered fractures to the skull, face, ribs, and fingers.",1
"An employee was driving a van to deliver packages and stopped to drop off a package. The van started to move, and the employee tried to stop the van by jumping back into the van. The van rolled back into a ditch and pinned the employee's right foot between the van and the concrete culvert in the ditch, resulting in amputations to all the toes on his right foot.",1
"While inspecting the belts and pulleys on an air conditioner, the drive belt started and partially amputated an employee's finger.",0
"Employees were installing concrete blocks for a retaining wall and were working in an 8-foot-deep, 30-foot-long trench. The trench collapsed and the employees were struck by soil and concrete block. One employee was hospitalized for multiple broken bones.",1
"An employee was working on an 80-pound alley scraper. When the employee tried to turn it over, the employee's right middle finger was caught between its wing and the cement floor. The finger was crushed and amputated.",0
"An employee was inspecting the inside of a door to a conveyor that had just been cleaned to remove a clog. When he gripped the door, the hinges broke loose from the welds. The door fell, and the employee was trapped between it and a handrail. He suffered a crushed left index finger.",1
"An employee was walking on a floor, slipped on powder on the floor, and fell resulting in broken hips.",1
An employee was stepping into the cab of a semi-trailer when he lost balance and fell to the concrete. The employee sustained a head contusion and broken ribs and was hospitalized.,1
"An employee was transferring a furnace sample from a furnace to a water bucket using a ladle. The sample fell into his boot, severely burning his right leg and foot.",1
An employee was working on a cleaning machine in a molding department. The cleaning machine became blocked with flash material. The employee stopped it and was reaching in to clear the obstruction when the blast wheel contacted the employee's hand. The employee underwent a partial medical amputation to the index finger.,0
"An employee was handling pallets on a truck. A pallet shifted, causing an amputation to the employee's fingertip.",0
"An employee was at a deboning workstation. She turned to leave, slipped, and fell about 2 feet from the work stand she was on to the concrete floor. She suffered a broken upper right arm and was hospitalized.",1
An employee was playing hopscotch and landed on both feet. Her left ankle popped and she was hospitalized with a possible broken bone.,1
"An employee was holding a baby gate at the top of a stairway when it came loose. She fell, suffering a broken right leg and a head contusion.",1
"An employee was repairing a garage door. As the employee was adjusting a spring, the ratchet they were using sprang back and hit them in the head. The employee was hospitalized, requiring stitches to the forehead.",1
"An employee tripped over a scaffold and fell to the concrete floor. He suffered a dislocated shoulder, a broken humerus, and a broken kneecap.",1
"An employee had entered the bed of a truck to see if it needed to be unloaded. The truck pulled away from the dock while the employee was inside. The employee tried jumping from the moving truck to the dock, but fell to the concrete ground several feet below. The employee suffered a head injury.",1
"Two employees were moving polyethylene pipes. Employee 1 lifted a pipe, which shifted as the other employee was holding its end. The second employee's hand was crushed between the end of the pipe he was holding and another pipe on the ground. He was hospitalized.",1
An employee was operating an automatic fillet machine. Fish guts were stuck at the infeed and the employee used his right hand to push the guts into the machine when his right middle finger sustained a laceration. The fingertip was later amputated.,0
"An employee was sweeping concrete when he fell into a hole in the ground. He landed on his knee, suffering a broken left leg.",1
"An employee was pricked on the right hand while handling fish, developed a bacterial infection, and was hospitalized.",1
"An employee was cutting meat when their arm contacted the meat saw, resulting in a laceration.",1
"An employee was trying to re-splice paper onto a reel spool after a sheet break. The nip point between the reel and the reel spool caught his right hand, crushing the hand and fingers.",1
A radiator was being lifted with an overhead crane. The load shifted and caught an employee's right index finger against the lifting strap. The finger was amputated.,0
"At about 1:40 AM on January 11, 2022, an employee was struck by a forklift in the warehouse. The employee was knocked down and displaced several feet on the concrete floor before the vehicle came to a stop. The employee was knocked unconscious and sustained lacerations to the face and back of the head and soft tissue damage in the right forearm. The employee was hospitalized.",1
"An employee was clearing a jam on an aspirator. The employee's left hand was caught in an airlock on the machine, which amputated the employee's ring, middle, and index fingertips.",0
"The employee was assisting a co-worker in lowering a truck into a container using a steel tie-down chain. The chain shifted under stress, catching the employee's right middle finger and resulting in amputation at the first knuckle.",0
"An employee was repositioning a tubular onto a platform when the tubular rolled off the platform and contacted the employee's left leg, resulting in a broken tibia.",1
An employee was troubleshooting a press machine and injured his right hand resulting in amputation of the middle finger.,1
"An employee was on a horse when it was spooked and bucked the employee off. The employee landed on their hips and legs and suffered a broken femur. The employee was hospitalized, requiring surgery.",1
"An employee was moving product while prepping an order when her shoe caught an antifatigue mat, causing her to trip and fall. The employee's left shoulder hit a roller table support leg and her head hit the floor, resulting in a dislocated shoulder and a head injury.",1
"An employee was descending a stepladder when they missed a step and fell approximately 4 feet to the floor below, resulting in fractured ribs.",1
"An employee was using a pedestal disk sander to chamfer a part. The employee suffered an amputation to a left-hand fingertip, caused by the part.",1
"An employee was discarding a pile of cardboard boxes. The employee climbed on a bale of flattened cardboard boxes that was 18 inches high when he lost his balance and fell to the ground, resulting in a fractured hip.",1
"An employee was delivering a pizza to a customer's residence. As the customer was opening the front door, the employee stepped back so the front door could open; he then fell off the steps of the porch and sustained a broken femur.",1
An employee was pulling a dock plate. The plate kicked back and lacerated his right index finger.,1
"An employee stepped out onto a maintenance stand platform from the crew entry door area of an aircraft. The employee was standing with his right foot on the first step of the maintenance stand. As he turned to go back into the aircraft, he tripped and fell halfway down the stairs of the stand, exiting through the side railing of the stairway and falling approximately 8 feet to the ground, striking equipment as he fell. The employee suffered six broken ribs, a broken collarbone, a dislocated elbow, and a collapsed lung.",1
"An employee was standing near a parked flatbed truck when the truck was bumped forward, pinning the employee's left knee between the front cage bar of the truck and the rear counterweight of a parked forklift. The employee sustained a left knee injury.",1
An employee shot another employee in the abdomen with a nail gun.,1
"Employees were placing a culvert under a railroad.  An employee was mounting a saddle on the rails of a jack and bore machine. When the chain sling tightened, the employee's left middle finger was caught in the movable part of the saddle. The fingertip was amputated.",0
An employee was standing behind a teller line helping customers. A customer who had been in line jumped up onto the counter and stabbed the employee in the abdomen with a knife.,1
"On January 11, 2021, an employee was cutting steel with a shear when he grabbed a tank with the shear to see if there was a hole in the tank. The shear tooth pierced an air tank and a powder-like substance started coming out of the tank. The employee went to rotate the cab of the shear to move the tank when it ignited. The percussion broke the front glass out of the shear, sending pieces of glass at his face, stomach, and legs, resulting in lacerations.",1
"Employee 1 fell on employee 2's leg, causing several fractures in employee 2's leg that required hospitalization.",1
An employee tore a muscle in his abdomen while unloading soiled linen carts.,1
"Employees were using a rotating rod to wrap up a pit cover from a frack site when an employee's pant leg got caught in the rotation, causing their leg to be broken in three places.",1
"An employee was walking around his vehicle on a driveway when he slipped on ice and fell on his right side, resulting in a broken right hip and wrist.",1
"Employee 1 clocked out and left the building, preparing to go home. Employee 2, who was not on the clock, approached employee 1 at gunpoint and told him to get in employee 1's car. Employee 1 complied and got in the driver's seat of his car, at which point employee 2 attempted to get in the passenger's side. Employee 1 started his car and tried to reverse rapidly. When employee 1 was pulling away, employee 2 fired his weapon four times through the passenger side window, hitting employee 1 in the back and right side three times and grazing his front side one time. Employee 1 suffered multiple gunshot wounds and broken ribs.",1
"An employee was walking when they tripped on a printer cord and fell, resulting in a left femur fracture.",1
"An employee was cutting plywood on a table saw. Near the end of a cut, the plywood bound between the blade and the fence. The board kicked and threw the employee's hand into the blade. The employee suffered amputations of the index and middle fingers and lacerations to the other fingers.",1
"An employee was using a forklift to raise a load of cardboard cartons to the loft level of the warehouse. He went under the loft to get a piece of cardboard that had fallen. When he moved back to get into the forklift, the cardboard cartons fell and he was struck by the falling cartons on the right side of his body, resulting in a fracture to his right femur.",1
An employee suffered a heart attack while performing work tasks.,1
"An employee was welding on a ship panel approximately 4.5 feet from the ground in the modular manufacturing facility. The employee started to pull on his welding lead, causing him to fall to the ground. The employee sustained fractures to his pelvis, hip, and right humerus.",1
"An employee was operating a mechanical letterpress. The employee reached to pick up scrap trim from the floor. The scrap trim was caught in the press's drive gears, which pulled in the employee's right index finger and amputated it at the second knuckle.",0
The injured employee was pounding rebars into the ground for a concrete form. Another employee bumped into the injured employee causing them to fall forward onto rebar. The rebar impaled the injured employee on the side of his neck.,1
"On January 12, 2022, an employee was guiding film through a machine when the sealing head closed on her left hand and crushed her middle and index fingers. Both fingers were amputated at the first knuckle.",0
"On January 12, 2022, an employee was hauling truck caps when they stopped on the side of the road to secure the load. When the employee was attempting to secure the load, one of the truck caps fell. The employee tried to catch it and lacerated his right index finger, resulting in hospitalization and surgery.",1
An employee was changing a reamer on a directional bore machine. He was using a large pipe wrench to loosen it when it slipped and broke his fibula.,1
An employee was clearing a jam on a slicer. The slicer's rotary blade caught the employee's right ring finger and amputated the tip.,1
"An employee was attempting to bleed off pressure on a casing into a cellar so they could work on the casing at a drilling pad. Gas started to leak, resulting in a flash fire. The employee suffered burns to the face, ears, and hands that required hospitalization.",1
"An employee was walking to her car at the end of her shift when she slipped on ice and fell, resulting in a broken leg or ankle.",1
An employee was taking out garbage when she tripped on a 4-inch piece of wood and fell to the concrete ground. She suffered a compound fracture to the left arm/elbow.,1
"An employee had just completed connecting his tractor to a trailer and was beginning to lower the trailer when the crank handle on the trailer's landing gear struck him on his lower jaw, resulting in a fracture.",1
"A machine was being closed during an inspection. It caught an employee's rain suit and pulled her in. She was caught by a large, turning metal bowl in the small space and suffered an abdominal abrasion.",1
An employee stepped on a nail while inspecting a job site. The employee developed a foot infection.,1
"An employee was changing a tool on a turret machine when the tip of his right index finger was crushed, resulting in a partial amputation.",0
An employee was cutting a rubber conveyor belt with a razor blade. The blade slipped and cut his wrist.,1
"An employee was stocking shelves when she tripped on a piece of grid work, resulting in a fracture to her left elbow.",1
"An employee was removing a steel coil off a reel when their left middle fingertip was caught between the pusher plate and the coil, resulting in an amputation.",0
"An employee was checking on a baghouse. He reached into a baghouse discharge and the airlock vanes, or metal blades, amputated his ring and middle fingertips.",0
"A product case had fallen into the T-car path of a palletizer, causing the T-car to stop. After lockout, an employee entered through an interlocked gate to remove the case. The employee was stepping past the T-Car when he stepped onto the rail of the T-car on the empty pallet slide. He slipped and fell backward, suffering a laceration to the back of the upper left leg (from the T-car slide rail) and a puncture wound to the back of the upper right leg (from the edge of a cable track pan).",1
"An employee was moving a mobile paste tank to a centrifuge about 15 feet away. The tank's wheel became caught in a crack in the floor, causing the tank to tip over onto the employee. The employee sustained multiple factures to their ankle and lower left leg.",1
"An employee was operating a 12,000-gallon, self-erecting water tower, which is operated by a powered hydraulic unit. As the tank elevated, the legs buckled and the tank began to fall. The employee tripped and fell while moving out of the way of the falling tank. The tank collapsed on the employee, resulting in crushing injuries to the abdomen.",1
"A crew was carrying an exterior sliding door. An employee lost his footing and the door fell on him, breaking his left tibia. He was hospitalized.",1
"An employee was operating a palletizer machine that wasn't running smoothly. The employee laid on his back and reached up into the machine when his finger got caught in the chain, resulting in an amputation at one of the knuckles.",0
"On January 12, 2022, an employee tripped over a pallet in a warehouse and fell to the floor, breaking his left femur.",1
"The injured employee was assisting a forklift driver in squaring a truck bed/body. As the forklift was letting the body down a couple of inches, it struck the injured employee in the shoulder causing a contusion.",1
"An employee was feeding slit coil into the press. As the employee cleared a jam, their gloves got caught in the material feeder resulting in a fingertip amputation.",0
An employee was training a new machine operator to press bearing races into hubs when their right index and middle fingertips were amputated.,0
"An employee was tightening the tension of a conveyor belt when their right index finger got caught in the conveyor, resulting in amputation to the first joint. The conveyor was not locked out/tagged out at the time.",1
"An employee was stepping out of a trailer onto a ladder when his boot got caught on the ladder step and he fell to the ground, resulting in a fractured left elbow and left femur.",1
"An employee was attempting to deliver mail to a home. A dog approached and the employee pulled out dog repellant. The owner pushed the employee to the concrete ground, resulting in injuries to their head and body.",1
"An employee was driving a forklift down an inclined road when the forklift turned over and fell to the ground along with the employee, who suffered a head laceration.",1
An employee was driving a forklift. His left thumb struck a rack and was amputated.,1
"An employee was trimming a horse's facial hair in a barn. The horse reared back on its hind legs, came down, and struck the employee's head with its hoof.",1
"On January 13, 2022, an employee tripped on a machine panel that was lying in a walkway. The employee fell to the concrete floor and suffered a broken left hip.",1
"An employee was backing a walkie stacker. The employee's foot struck a storage rack and was injured, requiring surgery.",1
An employee was using a hand truck to unload plastic milk crates from a refrigerated tractor trailer. A crate got stuck. The employee pulled on the hand truck and fell backward hitting his head on the tractor trailer wall or floor. The employee sustained a head injury and contusion.,1
An employee was lifting a box from a truck when they felt pain in their lower back.,1
"On January 13, 2022, at approximately 5:45 p.m., an employee and two coworkers were running the paint line. The injured employee was wiping down spinning rollers at the end of the line when his right arm was caught in the ingoing nip point on the roller up past his elbow. The employee lost a thin layer of the skin on his right arm up to his shoulder that requires skin grafts and multiple fractures.",1
An employee was draining water from a transfer hopper using a transfer pump and amputated their  left index and middle fingertips.,0
"An employee was installing drywall. A drywall cart became stuck on a temporary electrical cord on the ground, tipped, and fell over onto the employee's leg, breaking it.",1
"An employee was assaulted with a chair, resulting in cuts and bruises due to blunt force trauma.",1
"An employee was using a meat band saw to cut steaks when the tip of his left thumb contacted the saw blade, resulting in a fingertip amputation.",0
"An employee was trying to charge a pallet jack when the pallet jack went into reverse and pinned the employee's right leg against another pallet jack, resulting in an ankle laceration.",1
"An employee was working between two containers on dollies. One container was struck by a tug tractor in the employee's direction, and they became pinned between both containers. The employee suffered a laceration and fracture to their right leg.",1
"An employee was working with a crew that was paving and smoothing concrete for a road surfacing project. The employee noticed that the left-side winch of the concrete screed was not engaging. As the employee was troubleshooting the screed, their right hand was caught in the belt drive resulting in a partial amputation of the right index finger.",0
An employee was installing an ethernet cord in a bending machine's control panel. The employee suffered a 120-volt electrical shock from the machine's electrical cabinet.,1
"An employee fell while climbing down a roof hatch ladder, landing on the floor and suffering a heel injury. The employee was hospitalized.",1
"An employee was loading boxes onto a shelf. Their foot was positioned between a rack and a concrete floor ramp. When the employee turned, their foot caught the floor ramp and they fell to the floor, resulting in a fractured right hip.",1
"An employee was working with a bag of pyrotechnics in a test laboratory. The bag ignited while he was holding it, causing second degree burns to his head and right leg; and third degree burns on both hands.",1
"An employee had been using a forklift to move roofing insulation material. Some of the material was stuck together, and he climbed onto the back of the forklift to separate it. The material pushed him over and he fell, resulting in a broken right heel.",1
"An employee was operating an electric pallet jack when his foot slipped off a pad as he was turning and the pallet jack struck his foot, resulting in injury.",1
"While on a residential garbage collection route, an employee fell from the driver's side rear riding step of a rear load garbage truck. His lower left leg was struck by the driver's side rear tire, resulting in fractures of the tibia and fibula, along with lacerations to the top of the left foot.",1
"An employee was exiting a powered industrial truck. When his foot came down on the floor, his ankle rolled and fractured.",1
"An employee was manufacturing a replacement shaft for a malfunctioning conveyor. To polish the shaft, the employee placed emery cloth around it while it was turning in the lathe. The employee was caught by their glove and pulled into the spinning equipment, suffering lacerations around the shoulder, neck, and ear; a puncture behind the left ear; and an amputation of the left index finger between the first and second knuckles.",0
"An employee was working on a small-bore lathe. He put an extension on the lathe. Then, noticing that the tube and the lathe seemed to be off-center, he reached in and tried to correct the issue. The tube caught his cut-resistant glove, pulled in his left index finger, and amputated part of it. The machine was unguarded at the time.",1
"An employee was cleaning wood chips out of a table saw. The saw blade, still moving, amputated the employee's left middle fingertip.",0
An employee was in an aerial lift installing sheeting on top of the roof and sidewall of a building. An excavator working below the lift struck the aerial lift boom causing the boom to bounce up and down and side to side. The employee was ejected from the aerial lift basket and landed on the roof of the building. He then slid down into a roof gutter. The total height of the fall was 12 feet. The employee was hospitalized for broken ribs and a ruptured spleen.,1
"On January 13, 2022, an automobile was driven onto a four-post lift to raise the automobile in the air. A service technician engaged the Swing Air Jack in order to elevate the rear tires of the automobile above and off the lift. When the employee engaged the hydraulics to raise the automobile with the Swing Air Jack, the Swing Air Jack unexpectedly released horizontally and toward the employee who was struck in the face. The employee was rendered unconscious and was hospitalized for a concussion, brain bleed, and broken facial bones.",1
"An employee was emptying a smaller dumpster into a larger dumpster using a forklift when their right hand got caught between a dumpster and the forklift, resulting in amputation of their little finger.",0
"An employee was running wire in a residential attic to install an alarm system. He stepped on a board thought to be a secure part of the truss framing. The board broke, causing the employee to strike his head on the framing as he fell, causing a head injury.",1
"At about 1:30 p.m. on January 14, 2022, an employee was climbing into the cab of a bulldozer when the wind slammed the door shut on the employee's left little fingertip. The fingertip was amputated.",0
"Two employees were moving a defective powered pallet jack to the repair shop. To do this, the employee’s used a manual pallet jack and a gorilla bar to maneuver the powered pallet jack onto the manual pallet jack for transport. While moving the lifts, the powered lift contacted the control panel and shifted the powered pallet jack. The injured employee attempted to manually reposition the powered lift on the manual lift when the powered lift slipped and dropped to the concrete floor, trapping the employee’s left ring finger underneath. The employee was able to remove their finger from under the lift and was hospitalized for surgery. The left ring finger was amputated at the first knuckle.",0
"An employee was operating an automatic pallet wrapper when their ring finger caught on the corner of the rotating skid of product, resulting in amputation.",0
"At about 3:00 p.m. on January 14, 2022, an employee was trying to place a piece of wood (2x4) under a switchgear, which another employee was holding up with a pry bar. The pry bar slipped and the gear fell onto the first employee's left index finger. The employee suffered a distal amputation of the finger.",1
"An employee was dumping trash into a dumpster. The employee fell from the dock into a gap between the dumpster and a bay door, suffering a broken left femur. The employee needed surgery.",1
"An employee was backing a forklift out of a tractor trailer. The employee jumped off the equipment to avoid hitting a guard, and the equipment ran over the employee's foot and crushed it.",1
"On January 14, 2022, at approximately 5:30 PM, an employee was standing on a 6-foot step ladder to install and troubleshoot a cable internet line. As the employee descended from the ladder, he lost balance on the third step from the ground, fell to the ground, and sustained a broken left leg.",1
"An employee was splashed with sodium hydroxide solution, suffering chemical burns to the right arm, back, and both legs.",1
"An employee was removing a spent reel that had slipped off one of the eject rails from an unwinder. He went to push the core and dislodge it from the ejection rail. The employee began to raise his hands to warn other employees to stand clear and not enter the area. His right ring finger slipped into a hole in the chuck. The chuck closed and fell off the rails, crushing the employee's right ring finger between the chuck and spacer, resulting in a fingertip amputation.",0
"The injured employee was holding a pallet rack upright while another employee disassembled the pallet rack. The opposite upright fell toward the injured employee, breaking four ribs and puncturing a lung.",1
"An employee was pushing a cart carrying glass sheets. The cart flipped and pinned the employee's leg under it, breaking the employee's right fibula and tibia.",1
"On January 14, 2022, at 9:00 a.m., an employee was moving a wall section into place on the fourth level when they fell from the fourth level to the ground, resulting in broken ribs, fractured vertebrae, and a brain injury.",1
"An employee of Bird Electric Enterprises was working in a bucket truck. The tail of a jumper he was holding contacted an energized wire, causing an arc flash. He suffered a second-degree burn to the face and a third-degree burn to the neck.",1
An employee was greasing the bearings of a gravity take-up assembly. A pulley caught his sleeve and broke his left ulna. The machine was not locked out/tagged out at the time.,1
"An employee was changing out a grinder wheel. The machine cycled, and the shuttle moved forward and caught his hand against the wheel. He suffered tendon damage and possible broken bones that required surgery.",1
A telehandler was being operated when it moved to the side and struck a rigger. The rigger sustained a broken right foot and leg.,1
A Jones Lang LaSalle employee was changing an HVAC filter when he fell into a door jamb. He suffered a broken rib and a punctured lung.,1
An employee suffered a cut on their left leg from an electrical saw.,1
"An employee was climbing an extension ladder to adjust the increasing temperature of a new instant steam heater. The ladder slid out from under him as he was three-quarters of the way up. The employee landed on top of the  ladder on his right side, resulting in broken ribs and injuries to the heel and ankle.",1
"An employee was installing an under-dispenser containment sump when their left middle finger got caught between the sump and a bracket, resulting in a fingertip amputation.",0
"An employee fell backward off a two-step step stool, landed on the floor, and suffered a broken right hip.",1
"On January 15, 2022, a temporary employee was operating an electric pallet jack. The employee's left leg was caught between the jack and a pole, causing a fracture in the lower leg.",1
"An employee was trying to capture a cat that had gotten loose in an intensive care unit for animals. The cat bit the employee, who was hospitalized.",1
An employee was guiding a wooden pallet. The employee suffered a first-knuckle amputation caused by a support guard.,1
"An employee was leveling a planting bed. The employee fell through an open section of catwalk, landed on the ground, and suffered a head contusion.",1
"An employee was attempting to unjam a cocoa shell process machine when their left hand got caught in the machine, resulting in partial amputations of the middle and ring fingers.",0
"An employee was working on a roof top, removing steel to facilitate equipment installation. The employee slipped on the icy roof material, resulting in a fall to the concrete below. The employee sustained a fractured tibia and fibula above the ankle.",1
"On January 15, 2022, an employee was using a forklift to load parts onto a computer numerical control (CNC) saw. The employee programmed the saw to cut the material. On the last cut, he went to change the order when a piece was left in the machine. When the employee went to grab the piece, the machine started unexpectedly and contacted the employee's left hand. The employee suffered amputation of their index, middle, and ring fingers, right behind the nail of the index finger and straight across the other two fingers.",0
"An employee was operating a table-mounted 20-inch disk sander. A steel bar (60 inches long, 2 inches wide, 1/4 inch thick) kicked upward toward the guard over the top of the sanding disk. The employee's left thumb was caught between the bar and the guard and partially amputated.",0
"An employee was servicing a wall-mounted air conditioner from a ladder. A door closed on his hand, catching his little finger and causing a partial amputation.",1
An employee was working on a cardboard baler. The baler caught the employee's finger and amputated the fingertip.,1
"An employee was in a cattle pen, closing a metal gate. A skid steer hit a patch of ice and slid into the gate, which swung into the employee's face. The employee suffered skull fractures, a subdural hemorrhage, and a ruptured eye, all on the left side.",1
"An employee climbed down a gate while feeding cattle, fell from a 5-foot height to the ground, and suffered wrist and rib fractures. He was hospitalized, requiring surgery.",1
An employee was climbing down a fixed ladder on a rail car. A gust of wind caused him to fall to the ballast rocks about 4-6 feet below. He suffered a broken left arm.,1
"An employee was lifting a small boat out of the water using a crane. After disconnecting the crane from the boat hoist straps, the employee slipped on the pavement and fell, hitting his head.",1
An employee was backing up a stand-on pallet jack. The employee's right foot and toes were caught and injured between the pallet jack and a parked one.,1
An employee was shot in the chest by a robber while working at an auto parts counter. The employee was hospitalized.,1
"An employee was walking in a buffet service well when she slipped on water and fell, striking her head on the tile floor. She suffered a concussion, as well as an injury causing back and leg pain.",1
"An employee slipped on ice and reached out to stop his fall. He grabbed a pulley, which amputated four fingers and part of the thumb on his right hand.",0
"A temporary employee slipped and fell on a wet concrete floor in a warehouse. He struck his head and back on the floor and sustained head, back, and leg numbness.",1
"An employee was walking in a warehouse when a forklift struck her, knocking her to the ground. Her ankles were injured.",1
"An employee was climbing a ladder when the ladder slipped. The employee fell from the ladder and sustained a broken leg, broken wrist, and a laceration above the eye.",1
An employee was trimming flash off a part with a knife. The knife slipped off the part and stabbed the employee in the abdomen.,1
"An employee slipped and fell to the floor, suffering lacerations to the left side of her face.",1
"An employee fell from a ladder to the ground, suffering a shoulder injury. The employee was hospitalized.",1
"An employee was bending a metal bracket in a brake press. During the last bend, the employee's fingers were caught between the part and the top of the tooling. The employee's right middle, right ring, and left ring fingertips were amputated (without bone loss).",1
"At 6:40 p.m. on January 17, 2022, two employees were carrying a 6-foot-long steel crossbar. One of them tripped, and his left hand was crushed between the crossbar and the ground. He was hospitalized and the last joint of his index finger was later medically amputated.",1
"On January 17, 2022, an employee was detaching a dairy tanker valve after loading out cream. The pressure from the pump caused the valve stem to slam down and amputate the employee's right middle finger.",0
"On January 17, 2022, an employee had been shoveling snow when the employee felt pain in their chest and started sweating. The employee began walking and fell to the ground. The employee was hospitalized for a heart attack and required surgery.",1
"An employee was stepping out of his truck onto the pavement. He slipped and fell, striking his back and head on the truck's running board.",1
"An employee came into a building from a snowy parking lot, then slipped on the tile floor after stepping off the rug inside the entrance. The employee suffered two broken hips.",1
An employee was greasing a bearing on a conveyor belt. The chain sprocket caught the employee's finger and amputated the fingertip.,1
"An employee was attacked while getting out of his car. An assailant hit him on the head twice with the butt of a gun, then shot him in the stomach after he turned around and wrestled for control of the gun. He was hospitalized.",1
"An employee was lowering a metal drain to the floor. His left hand was caught between the drain and the floor, and his middle fingertip was amputated.",1
"An employee lost his balance after attaching his lanyard to a scaffold. He grabbed for the scaffold, and his finger was pinched between the attachment point and the lanyard clip. He suffered a fingertip amputation with no bone loss.",0
"An employee was moving jugs on a dock. She fell through a gap between the dock and a trailer, suffering a laceration to the leg. She was hospitalized.",1
An employee fell from a ladder to the ground and suffered head injuries. The employee was hospitalized.,1
"An employee was using a pole saw to trim fronds on a palm tree. While reaching to a second palm tree, the employee contacted a power line and suffered electrical burns to the hands and right leg.",1
"An employee was cleaning a printing machine. An ink tray fell on the employee's finger, crushing it, pulling flesh off the finger, and fracturing the fingertip.",0
"An employee was working at a construction site when they were struck by a falling 2x12x8 board, resulting in a fractured shoulder.",1
"Before 2:00 p.m. on January 18, 2022, a rural mail carrier was walking down a hill, back to their vehicle. The employee slipped and fell on icy ground and suffered a broken lower left leg. The employee was hospitalized, undergoing surgery.",1
"At 2:15 p.m. on January 18, 2022, an employee was shearing 14-gauge alloy steel sheet material on a hydraulic shear. When the machine activated, the plunger of the hydraulic hold-down cylinder came down and crushed his left middle fingertip, causing an amputation.",0
"An employee was using an aluminum concrete float to screed recently poured concrete on a parking lot. While moving the float pole, the employee came into contact with an overhead power line. The employee suffered third-degree burns on both feet.",1
An employee was doing automotive repair when a piece of metal flew off an air hammer bit and lodged on the employee's nose.,1
"An employee was using a metal retrieval tool to dislodge a fiberglass tool trapped in an electrical conduit. The metal tool contacted live a electrical part, and an arc flash burned the employee's hand and face.",1
An employee was struck by a metal strand after a car ran it over.,1
An employee was trying to fix the alignment of a wheel that was keeping a bay door stuck in the closed position. He was trying to adjust a bracket to manually adjust the wheel when the bracket sprang loose and hit him in the left eye area. He suffered lacerations and was hospitalized.,1
"An employee was installing electrical wire in a residential attic when they fell through the ceiling approximately 22 feet to the ground floor below, resulting in a fractured right ankle.",1
"On January 18, 2022, an employee was stepping out of an elevator when they fell 18 inches from the elevator to the outer floor surface. The elevator did not stop evenly with the outer floor surface. The employee sustained fractures to the left knee and shoulder and was hospitalized.",1
An employee was retrieving a package from an elevated area using a ladder. The ladder fell and the employee suffered a broken left hip.,1
"An employee was de-bagging a machine line when a forklift hydroplaned, pinning the employee against the de-bagger, resulting in a leg injury.",1
"Three employees were preparing to move a 40-foot camera pole section off a gooseneck trailer. While two of them were setting up equipment, the injured employee stepped up on the right front corner of the trailer. The pole then shifted, and fell to the ground on top of his ankles. He suffered a broken right ankle and soft tissue injuries to his left ankle.",1
"An employee was cleaning scanners with rubbing alcohol when he spilled the solution on his clothing. While taking a cigarette break, the flame from the lighter ignited the alcohol on the employee's clothing, causing his pants to catch on fire, resulting in burns to his left hand and left leg.",1
An employee stopped a forklift and dismounted. The forklift started to roll on the slanted surface and caught the employee against a parts container. The employee suffered a broken pelvis.,1
An employee fell on ice on a sidewalk while walking into work. The employee suffered a broken left femur.,1
"An employee was helping clear a parking lot. The employee stepped off the sidewalk, slipped on black ice, and fell, suffering a head laceration and a concussion.",1
An employee was setting up his tractor truck when he slipped on a patch of ice on the ground. He suffered torn quadriceps muscles in both legs.,1
An employee was putting trash into a trash compactor. The employee fell forward into the compactor and suffered a broken right shoulder.,1
"An employee was cleaning and drying substrate. While he was using a hand-held propane torch to dry the substrate, his pants and lower shirt caught fire. He suffered burns to the lower back and buttocks.",1
"A forklift backed over an employee's foot, breaking it.",1
"An employee was working on a scaffold when a forklift contacted the scaffolding, causing them to fall to the ground. The employee sustained a broken shoulder and a displaced disc.",1
An employee was fixing a rotary valve when their right hand was caught in the machine resulting in an amputation injury.,0
"An employee tripped on the corner of a cashier station and fell to the floor, resulting in a right hip fracture.",1
"An employee was trying to release an automatic garage door. Power returned and the door released, catching the employee's left middle finger and amputating it.",0
An employee was using emery to polish a shaft on a manual lathe when his work glove was caught in the shaft. His right middle finger was amputated.,0
A temporary employee operating a motorized pallet jack made a right-hand turn to enter a doorway when the vehicle collided with a stack of product in plastic containers and the employee was pinned between the product and the pallet jack. The employee suffered a fractured left foot and fractured right ankle.,1
An employee slipped on ice while walking across a parking lot. The employee suffered a broken ankle.,1
"On January 20, 2022, an employee slipped on ice and fell while making a delivery. The employee suffered a leg/hip injury.",1
An employee was using a table saw to cut pieces of a 2-by-6. His right middle finger contacted the blade as he pushed the wood through and was lacerated. The fingertip was medically amputated.,0
"An employee was moving dough from the conveyor to the next station when her right ring finger was pinched by the edge of the conveyor belt, resulting in a fingertip amputation.",1
"An employee was on a scaffold preforming drywall finishing work on the interior walls above the back door and fell 8-9 feet to the concrete floor below. The employee was hospitalized for a fracture on the right side of the face and head, right kidney damage, and liver damage.",1
"An employee was lifting a 50-pound photovoltaic (PV) panel from a horizontal stack of PV panels on a pallet on the ground. The next panel in the stack tipped forward and hit the employee below the left kneecap, breaking the employee's lower leg.",1
"An employee slipped and fell on ice and snow, suffering multiple fractures to the thoracic spine.",1
An employee was lifting traffic control devices and loading them into the bucket of a skid steer when he suffered a hernia. The employee was hospitalized for surgery.,1
"An employee was opening a kennel to retrieve a cat for treatment when the cat bit the employee, resulting in a bacterial infection. The employee was hospitalized.",1
"A temporary employee was transferring an expanded metal sheet from an expanded metal press to a leveler machine. As the employee was feeding the expanded metal sheet into the leveler machine, fingers on his left hand became caught in the openings on the expended metal sheet, and his hand was pulled into the leveler rollers. The employee sustained lacerations to his left index, middle, and ring fingers, and the ring finger was amputated.",1
"An employee was fixing a lift that was used in a crematory. The lift was propped up with wooden blocks so that the employee could line up the holes for new bolts. One of the wooden blocks moved and the lift collapsed, amputating the employee's right ring finger just above the knuckle.",1
An employee was crossing the street to bring a garbage can to the back of a garbage truck. A vehicle struck the employee and broke the employee's left leg.,1
"An employee was cleaning a screen in a blast booth. The employee's foot engaged an auger, which lacerated the foot and partially amputated two toes.",1
"Two employees were doing repairs on a backhoe's outrigger. While they were using a forklift with a ratchet strap to position the outrigger, the ratchet strap came loose and struck one of the employees in the face. He fell into the stairs of the backhoe. He suffered lacerations and impact injuries to the face and head and was hospitalized.",1
"On January 19, 2022, an employee was cleaning melted plastic particles off a pull roller in an extruder when his left hand was caught between two rollers resulting in amputation of four fingers (all but the index finger) on the left hand.",1
"An employee stepped off a stand-up pallet jack and was maneuvering around it when he stepped back into another, parked pallet jack that had two empty pallets on it. He fell back onto one of the pallets and his right leg was pinned between the pallets and his own moving pallet jack. The lower leg was broken above the ankle.",1
"An employee was walking to his truck when he tripped, fell, and struck his left knee on the ground. The employee sustained a fractured left knee.",1
"An employee fell on an icy floor, suffering a broken right leg.",1
An employee was attempting to grab an 18-inch piece of sample material coming through an angle roller when their fingers became caught in the machine. The employee sustained a cut to their right middle finger and a partial degloving and partial amputation to their left index finger.,0
"An employee was exiting her vehicle when she slipped on ice and fell to the ground, resulting in a hip fracture.",1
"An employee was leaving a switcher truck when she slipped, fell, and hit her head on the ground. She suffered a head injury.",1
"An employee was putting a tarp over a salt bin when he fell 7 feet to the ground below, resulting in broken ribs and a head injury.",1
An employee was using a chop saw to cut meat. The saw amputated the tip of his left thumb.,0
An employee was trying to repair a locking mechanism on the control panel of a laser screed. The panel slipped forward while the employee was working on the lock with their left middle finger in the track it slid on. The finger was partially amputated.,0
"An employee was using a shroud roller to bend metal bar stock (11 inches long, 1 1/2 inches wide, 1/4 inch thick). The roller caught his left index finger and partially amputated it.",0
An employee's hand was caught and crushed by the automatic loading door on a molding machine.,1
"A crane was being used to lift and move a cargo container. The container shifted, and an employee's right hand was caught between it and the crane. The employee's ring and little fingers were amputated.",0
"An employee was slicing vegetables using a mandoline slicer. The blade caught the employee's right middle fingertip, causing a partial amputation.",0
An employee was cutting parts with a bandsaw. The sawblade caught the employee's right glove and lacerated the employee's little finger. An inch of the finger was medically amputated.,1
"An employee was assaulted in a hospital parking lot by a discharged patient, who struck her on the head with a rock. She suffered facial fractures.",1
An employee noticed that plastic film was sticking to a die on a machine that cuts the film into boot shapes. The employee was using a tool to apply corn starch powder to the conveyor belt when the tool became lodged in an ingoing nip point. The nip point then caught the employee's right index finger and partially amputated the fingertip.,0
"An employee was stepping off a ladder onto a roof. His foot slipped and he fell off the roof, landing on the ground about 10 feet below. He suffered a broken left wrist and injuries to the left side of his face.",1
An employee slipped and fell on ice in a parking lot.,1
An employee was walking the ship tracing a welding gas line. The employee climbed a scaffolding ladder and then climbed over an access gate/guardrail and stepped onto plastic sheeting that was covering an existing opening. The employee fell 30 feet and was hospitalized for a dislocated shoulder and a hip puncture.,1
An employee was pulling a three-wheel bike into a garage bay. The bike accelerated and struck objects in the garage. The employee suffered lacerations.,1
"An employee was reeling in a poly line onto a trailer. The line snapped and struck the employee's fingers, resulting in fingertip amputations.",1
"An employee was working on a 60-kilowatt diesel generator in an outside workshop. He noticed some squeaking while checking the belts on the engine. As he tried to spray lubricant on the belt, the fan caught his right index finger, causing a large laceration. The finger was medically amputated above the second knuckle. The fan was not locked out/tagged out at the time of the incident.",1
An employee was lowering a hinged standing platform when her finger was pinched between the plate and the metal leg. She suffered a partial fingertip amputation.,0
"An employee was in a yard directing and coordinating the delivery and unloading of trucks. A wheel loader ran over the employee's left leg. The employee was hospitalized, undergoing surgery including the amputation of the leg below the knee.",1
Two employees were unclogging a jammed corn pump. They took the product hose off the pump. One employee's right middle fingertip was amputated by the pump's impeller.,0
"An employee was hit in the abdomen by a dislodged cheater pipe, causing internal bleeding. Surgery was required.",1
"An employee was delivering retaining wall blocks when he stepped backward and fell off a flatbed trailer to the ground 3.5 feet below, resulting in broken ribs that required hospitalization.",1
"An employee was troubleshooting a trim weigh conveyor scale on a line. A sensor was triggered and the employee's left little finger got caught in the pulley and pulled into the sprocket, resulting in amputation.",0
"An employee was installing rebar near power cables. The cables shocked him, causing burns on both hands, both arms, and both sides of his face.",1
"On January 19, 2022, a press operator (employee 1) and a lift truck driver (employee 2) were performing die changeover duties. Employee 1 was attempting to remove a piece of scrap metal when his glove was caught in the quick change die plate. He lowered his left hand and employee 2  took it as a signal to move forward with the die on the lift truck. When the lift truck moved forward, employee 1's right index finger became caught in a pinch point between the die and the die stop, resulting in an amputation.",1
A temporary employee was driving a stand-up forklift when it crashed into a steel storage rack's cantilevered support. The employee suffered a broken left tibia and was hospitalized.,1
An employee was trying to unjam a rewinder slitter. His hands were caught in the ingoing nip points and degloved. He was hospitalized.,1
"An employee was climbing down an extension ladder when the ladder's feet gave way. The employee fell to the concrete floor, resulting in broken ankles.",1
"An employee's right hand entered the rotary airlock of a dust collection unit. His middle, ring, and little fingers were pulled through the airlock and amputated.",1
An employee tripped and fell while helping another employee with a computer problem. She landed on the ground and suffered a broken bone in the knee.,1
"On January 20, 2022, an employee was pulling racks of glass steel frames on a cart. The employee fell to the concrete floor and suffered injuries causing internal bleeding. The employee was hospitalized.",1
"An employee was on a manufacturing line platform, doing an inspection, when his right hand was pinched by moving parts and rollers resulting in a right arm compression injury. The machinery was guarded at the time.",1
"An employee was on a roof, connecting two metal pipes for a cooling tower. The employee's left thumb was caught between the pipes and was amputated.",0
"An employee in a warehouse was walking behind a forklift that was backing up. The forklift's rear counterbalance struck the employee, causing them to fall to the concrete floor. The employee sustained a head injury and a fractured right tibia.",1
"As employee 1 was walking between a dump table and a backstop, a brake press operator (employee 2) actuated the machine's ejector. A pole half shell was ejected from the press and struck another half shell sitting on the dump table. The pole half shell struck employee 1, resulting in a right arm fracture, an abdominal contusion, and internal organ damage.",1
An employee was closing a safe when her right middle finger was caught in the door. The fingertip was amputated.,0
"An employee was outside a building, walking with a cane, when he tripped on some pallets and fell forward. He suffered two broken arms that required surgery.",1
An employee was operating a powered industrial vehicle (PIV) and backed into a paper roll. He sustained a left ankle fracture and was hospitalized.,1
"An employee was trying to place a product into a heated tank to clean it. A stainless steel lid was covering the tank. The employee turned the tank on and a hot water solution exploded from the tank, covering parts of his face, neck, head, chest, and arms. The employee suffered burns to the upper body region.",1
"An employee was walking through a warehouse when they were struck by a forklift. The employee sustained a broken left ankle, left toe, and left elbow.",1
"An employee slipped on ice while getting out of his car in a parking lot. He fell, suffering a broken right hip.",1
"On January 20, 2022, an employee had completed cleaning debris off a one-story commercial building. As he was descending an 18-foot extension ladder, the ladder slipped, causing him to fall about 12 feet to the ground. The employee was hospitalized, and he suffered a laceration to his head, a broken collarbone, and a bruised shoulder. He may have also suffered a head injury.",1
"A temporary employee slipped on ice and fell to the ground, suffering a leg injury.",1
"An employee was cleaning a machine with an air hose. The employee's left glove was caught in the machine, which pulled in his hand and arm. He suffered a laceration and broken bones in the hand and arm.",1
"An employee was walking on a sidewalk when they slipped and fell, resulting in a broken femur.",1
"An employee was cleaning a bottom coater head and changing over from yellow primer to clear primer. The employee's hand was pulled into the rollers, resulting in a degloving of the right hand.",1
An employee fell from a ladder while servicing a kitchen exhaust hood. The employee landed on the floor 8 feet below and suffered broken ribs.,1
An employee was attempting to remove a storm gutter. The employee slipped and fell 20 feet from the roof to the concrete sidewalk in front of the townhouse he was roofing. The employee suffered a fractured skull and fractured neck vertebrae.,1
An employee's left index and middle fingers were inside the hole of a grill on a track drill rig auger. A Kelly bar came down and amputated both fingertips. The employee was hospitalized.,1
"An employee was troubleshooting a de-bagging machine's motor. He removed the safety cover from a chain drive on the machine, then checked the fan on the motor. When he reached to pull himself out from under the machine, the chain and sprocket caught him and amputated the tip of his ring finger.",0
Two employees were carrying a piece of equipment to throw into a scrap hopper. One employee slipped and fell backward and the back of his head struck the ground.,1
An employee was cleaning a fryer when their foot was burned by the hot oil. The employee was hospitalized.,1
An employee was working on a lathe when it pulled in his shirt. He suffered cuts and swelling and was hospitalized.,1
"An employee was operating a cardboard compactor. Needing to fix a problem, he opened the gate covering the compactor and began to push the cardboard down with his foot. The compactor caught his foot and injured it.",1
"An employee was in the process of rigging up equipment. While releasing ratchet straps with his right hand, the employee was supporting himself by placing his left hand on a gusset in the mast. As the second ratchet strap was released, the tong counterweight shifted and slid down about one foot, pinching the employee's fingers between the counterweight and the gusset and resulting in several broken fingers.",1
"An employee was cleaning equipment when their finger contacted a blade, resulting in a partial amputation to their right ring finger.",1
"An employee was positioning equipment on a semi-truck when they slipped on grease and fell on the truck bed, resulting in a broken leg.",1
An employee was trying to remove buildup from a molding machine and suffered a left elbow injury.,1
"An employee slipped while walking out of a truck and fell to the ground, hitting his head and suffering a brain bleed.",1
"An employee was welding on a waste oil tank when fumes from the tank ignited, causing an explosion and fire. The employee sustained severe burns to their upper torso.",1
An employee was walking toward a customer's residence to deliver a flower arrangement when they slipped on ice and fell backward onto the sidewalk. The employee sustained a fractured T10 vertebra.,1
"An employee was using a folded stepladder to climb to the roof from the inside of an added-on office space. The ladder fell from under him and he landed on the ground 8-10 feet below, suffering a broken ankle/heel.",1
An employee slipped while exiting a truck and fell to the ground. The employee suffered a broken femur.,1
"During a fiber placement job, an employee needed to remove a branch from an existing cable strand. He put his 24-foot extension ladder on the strand and cut the branch; the strand then broke and he fell about 15 feet. He suffered a broken elbow, broken ribs, and a bruised kidney.",1
"An employee was walking her dogs on the side lawn of VCA Animal Hospitals, Inc. She slipped on snow- and ice-covered grass and fell, resulting in a fractured right ankle.",1
"An excavator ran over an employee's foot, causing a cut.",1
"An employee made a stop and was checking his semi-truck and equipment. While entering the cab, his left leg made contact with a piece of emergency equipment. The lower left leg was broken and the employee was hospitalized.",1
"An employee tripped and fell on a ramp, suffering a broken right hip.",1
"An employee was pulling orders using a forklift. As the employee was throwing away trash, the employee's right hand was caught between the forklift and a dumpster. The hand was broken and lacerated.",1
"An employee was securing a load on an open-bed trailer. The employee fell backward off the trailer to the concrete about 5 feet below, suffering a broken hip. The employee was hospitalized.",1
"An employee slipped on ice in a parking lot and fell to the ground. The employee suffered a fracture to the right leg, below the knee, as well as a shattered ankle.",1
"An employee was walking down stairs in front of a building. He missed a step and fell on his left hip, suffering a fracture.",1
"An employee was climbing down a 10-foot aluminum ladder after replacing a light bulb on a street lamp. The employee fell at the last step, suffering a compound fracture to the left wrist.",1
"An employee was cleaning a magnet on a machine with his right hand. The machine moved, and a finger on his left hand was pinched between a roller and the stop. The fingertip was amputated.",0
"An employee tripped over an IV line, fell, and suffered a broken left hip. The employee was hospitalized.",1
An employee was loading a 14-inch flange into a vertical fixture. The employee removed hooks from the flange to adjust it in the fixture; the flange fell out of the fixture and caught the employee's left hand against the machine. The employee's ring and little fingers were broken.,1
"An employee was operating machinery when their finger was pinched by the machinery, resulting in an avulsion.",1
"An employee was performing maintenance on a machine. The machine caught the employee's left hand, partially amputating the ring finger.",1
"An employee was removing a window from a truck when the handle broke off the window causing the employee to fall from the tailgate approximately 36 to 42 inches to the ground. The employee suffered a broken collar bone, multiple broken ribs, a punctured lung, and a right wrist injury.",1
"An employee was in a loading dock area, moving a laundry cart down a ramp, when he fell backward over the railing onto the pavement below. He landed on his back and hit his head on the asphalt. He suffered broken vertebrae and was hospitalized.",1
An employee was cutting wood on a bandsaw and amputated their right ring  fingertip.,0
An employee slipped on ice while exiting a vehicle and suffered a broken leg.,1
"An employee was operating a bandsaw on a butt line to remove double bones from product. The employee tried to use a push stick to remove product from the bandsaw cutting platform, then reached to remove the product by hand and suffered a partial amputation to the ring finger.",0
An employee was connecting live wires to an electrical panel box. The employee suffered second-degree burns caused by an arc flash.,1
"An employee was securing a load of precast concrete on a trailer. He fell and was knocked unconscious, suffering a concussion, a laceration to the left side of the head, and a skull fracture.",1
"An employee opened a trailer door. A large plastic tote had shifted during transit, and it fell onto the employee's left foot. The middle toe was amputated.",0
"An employee was using a steel bar to cap on a drum assembly. The bar caught the employee's hand and pulled it up into the framework of the gear system of a nearby stranding machine. The employee's hand was pinched between the bar and the machine's frame, and the employee suffered a fingertip amputation.",0
"An employee was assembling a hose for a client. A hydraulic crimping press activated and caught her left index finger, amputating the last joint.",0
"An employee was walking in a restaurant when she fell, suffering a broken right leg. She was hospitalized.",1
An employee walked through an interior door in a truck loading bay area and fell 4 feet to the floor of the loading bay. He suffered a broken hip and was hospitalized.,1
"An employee was driving a powered industrial truck through a product storage aisle. The back of the truck struck a wooden pallet that was sticking out of a rack. The pallet was pushed into another pallet. This caused a board to break off from the pallet and enter the truck, striking the employee in the left side. The employee suffered broken ribs on the left side, as well as a hernia between ribs.",1
"On January 21, 2022, an employee was removing a draw valve on a 500-gallon propane tank indoors for replacement. When the valve was removed, liquid propane began spraying out of the tank. A second employee (injured employee) went to the nearby electrical box to cut the electrical power. At that time a spark ignited the liquid propane causing a fire. The injured employee was hospitalized for burns.",1
"An employee was unloading a sheet metal brake from the back of a delivery box truck. As the employee was setting the machine on the ground, it amputated the tip of the employee's right index finger.",1
"An employee was helping a co-worker fill a mop bucket with hot water when the bucket fell and hit the ground. The hot water splashed up and contacted the employee, resulting in second degree burns to their face and the left side of their torso.",1
An employee was climbing onto a bulldozer when they slipped on ice on the track and fell striking their head and resulting in a head injury.,1
"On January 22, 2022, an employee was using a ripsaw to cut a panel. Hearing a noise, he turned off the saw and reached in. The blade amputated his right ring finger at the first knuckle.",0
"An employee was operating a horizontal hydraulic cylinder. He was checking the port where debris fell out, looking for a clog, when the machine amputated the tip of his right middle finger.",0
An employee was moving airport baggage carts. The employee suffered a herniated disk while bending over to unhook a cart from another cart.,1
"An employee was working next to a deep fryer when an aerosol can of cooking spray fell into it. The can exploded and hot oil from the fryer spattered onto the employee, who suffered burns to the upper body. The employee was hospitalized.",1
An employee was working on a 6-foot ladder to remove wires from the ceiling when they fell. The employee suffered fractures.,1
"An employee was on a roof. While reaching over a parapet to pressure-wash an exterior wall, the employee fell. The employee landed on the ground and suffered fractures to ribs, a wrist, and the face, as well as internal bleeding.",1
"An employee was driving a baggage tug in a tunnel in an airport terminal. The tug struck a concrete pillar, and the employee suffered a compound fracture below the left knee. He was hospitalized.",1
"An employee was pushing a thermometer cart to a patient's room. The cart's wheel caught on something, and integrated brakes on the wheels caused the cart to stop quickly. The employee tripped over the cart wheel and fell, suffering a broken right hip.",1
"An employee was closing the door to a patient's room. The floor outside the room was wet, and she had to reach for the door to hold herself up. It closed on her right hand and fingers; the ring finger was amputated.",0
"An employee was installing a new screw jack on a metal fabrication line. As he used a pair of vise grips to manually turn a motor shaft to calibrate an encoder, the vise grips slipped and cut him. He suffered partial amputations to his right middle finger and ring fingertip and was hospitalized.",1
"On January 23, 2022, an employee was trying to clear a jam in a soap stamping machine. The point of operation caught the employee's right hand, amputating the ring and little fingertips. The machine was unguarded at the time, and its safety interlock was not working.",0
"Two employees were pushing on opposite sides of an office door, one trying to get in and one trying to get out. One employee's finger was caught in the door, and the employee suffered an amputation.",0
An employee suffered a severe hand injury while operating a trash truck compactor on a residential route.,1
"An employee was climbing down a fixed catwalk ladder to gain access to the main deck when he fell approximately 6 feet, resulting in a bruised back and broken right arm.",1
"An employee was on break in the break room. When she got up and went to leave the break room, she tripped and fell, resulting in a broken hip that required hospitalization and surgery.",1
"An employee slipped on icy stairs while making a delivery to a house. He fell, suffering an injury to his arm.",1
An employee was cutting a piece of plywood using a panel saw. The blower motor seemed to be clogged with sawdust; the employee removed the dust bag and was trying to clear the motor when it partially amputated his left index and middle fingers (each at the first knuckle).,0
"An employee was driving a high-reach forklift. The employee began to turn into an aisle, saw another employee in the aisle, and tried to stop the turn. The forklift struck an end cap, and the employee's left foot was caught between the two. The employee suffered a crushing injury and fractures to the foot and toes.",1
"At 11:40 p.m. on January 23, 2022, an employee was sorting parcels at a mail sorting machine. A large package came through the machine and landed on the employee's right hand, amputating the ring fingertip.",0
"An employee was operating a forklift with a skid on the tray. The forklift turned a corner and the skid was pushed up. It crushed the employee's right little finger, which was amputated.",0
"Three employees for J&R Transport were onsite when a flash fire occurred at an oil/gas wellsite. J&R Transport was hired to clean heater treater equipment at the wellsite. The heater treater had been removed from the oil/gas well system and was placed adjacent to the well head. A roustabout crew from another employer was onsite and removed the bolts and fire tube from the heater treater. When the tire tube was removed, a black liquid came out of the heater treater and spilled onto the ground and surrounding area. J&R Transport performed vacuum truck operations to remove the liquid from the ground. When that was complete, two J&R Transport employees began power washing the inside of the heater treater. One employee operated the power washer wand while the other employee operated the vacuum truck's suction hose. During this operation, a flash fire occurred inside the heater treater vessel resulting in fire shooting from the open end of the vessel where the two employees were working. One employee was thrown backward and suffered fractures to his collar bone, ribs, and shoulder and burns to face and arms. The other employee suffered second degree burns to his hands and first degree burns to his face. One employee was hospitalized.",1
"At 2:25 p.m. on January 24, 2022, an employee lost their footing while walking down steps after delivering mail. The employee's left ankle was broken.",1
"An employee was cutting a small piece of wood on a table saw. The wood pinched the saw blade and kicked, and the blade amputated the employee's right index finger. The machine was not guarded at the time.",1
"An employee slipped on ice and fell to the ground, landing on his side and suffering broken ribs.",1
"An employee slipped while walking past a deli counter and fell to the floor, suffering a hip injury. The employee was hospitalized.",1
"A mini excavator tipped over while being used to lift a piece of equipment in a shop, breaking an employee's fibula. The employee was hospitalized.",1
"An employee was using a 25-ton-capacity overhead crane to place a 1,500-pound coil of steel onto a rack one foot above the ground. Once on the rack, the coil tipped over and struck the employee on the chest, then pinned the employee against another coil. The employee suffered severe bruising to the chest and was hospitalized.",1
"Employees were loading steers on a truck. One of the steers became angry, turned back, came off the ramp, headed towards the pen, and struck the pen's gate. One of the employees was standing at the gate, and the impact threw the employee backward. His head struck concrete and he suffered a fractured skull and eye socket.",1
An employee fell to the ground from a height of about 12 feet. The employee suffered broken feet and a broken leg.,1
"An employee was stocking shelves and fell from a height to the floor, resulting in a bruise to the head.",1
An employee was walking into a parking lot to collect shopping carts. A pickup truck backed into the employee and knocked them to the ground. The employee's head struck the pavement and the employee suffered a concussion.,1
"An employee was operating a stand-up dock stocker. A sit-down forklift struck the employee, and its forks broke both of his legs.",1
"On January 24, 2022, an employee slipped on ice in a parking lot while stepping out of their vehicle. The employee suffered a concussion.",1
"An employee was attempting to make repairs to a warehouse heater. The employee utilized a 15-foot telescoping hydraulic lift that was positioned under the junction box. The employee boarded the lift and raised the platform to a height of 9 feet. He then reached back to secure the swing gate of the platform when it jostled the linchpin securing the enclosure to the work platform. The release of the linchpin caused the enclosure to collapse, knocking the employee off the elevated platform to the concrete floor. The employee suffered fractures to both wrists, their right knee, and their right ankle, requiring hospitalization.",1
"On January 24, 2022, an employee was using a tube bending machine. The employee pushed a button and his left little finger and ring finger were clamped by the machine. The employee suffered injuries to his ring finger and amputation of his little finger.",1
"An employee was picking up loose trash while in the vicinity of a dumpster storage area. The employee attempted to roll a dumpster out to the trash truck when the dumpster crushed his gloved left little finger against the metal wall of the outdoor storage location, resulting in a fingertip amputation that required hospitalization.",1
"An employee was in the breakroom sitting next to a stack of chairs. Later, the employee was found on the floor of the breakroom with a stack of chairs on top of them, resulting in a broken hip.",1
"An employee was walking to a storeroom. The employee slipped on a metal plate (which was lying on the floor to protect a height transition in the concrete floor), fell, and landed on his left hip where a two-way radio was attached. He suffered a broken femur.",1
"An employee was getting out of the passenger side of a vehicle in a parking lot. She slipped on ice and fell, landing on her left knee and suffered fractures to the knee and her femur. She was hospitalized, undergoing surgery.",1
An employee was maneuvering a cart. The employee's left hand was pinched between the cart and a metal pole. The employee's left ring finger was amputated.,0
An employee was turning a corner while operating a pallet jack when the pallet jack hit a stack of skids. The employee suffered a fractured left leg.,1
"An employee was scanning barcodes on palletized glass panes when the panes shifted and fell toward the employee, pinning them between the panes and a table. The employee suffered a fractured tailbone and pelvis.",1
An employee was welding parts together. The lead welding wire punctured the employee's left knee. The employee was hospitalized.,1
"An employee was pushing a large box across the floor. The employee tripped and fell, suffering a broken elbow.",1
"On January 25, 2022, an employee was flagging traffic when they were struck by a motorist who went inside the work zone, resulting in broken legs.",1
"An employee entered a delivery truck to check the product in it. The truck drove off with the employee in it. When it slowed down, the employee jumped out of the semi-truck and fell onto the road, suffering a broken skull. He was hospitalized.",1
"On January 25, 2022, a temporary employee was sitting on the back of a utility cart with an attached flatbed. As the cart started to move, he slid off the back and fell 2 feet to the asphalt. He suffered a concussion, a left cheek contusion, and facial fractures and was hospitalized.",1
"On January 25, 2022, an employee tripped over a box while walking to a nurse's station. The employee fell to the tile floor and suffered a head laceration and broken neck vertebrae.",1
"An employee was climbing a ladder that had been placed on a cable strand. The ladder started to slide on the sloping strand until its strand hook caught, flipping the ladder over and causing the employee to fall to the concrete ground. The employee suffered a broken collarbone, broken ribs, a bruised lung, and a lacerated liver.",1
"An employee was engaged in framing activities and was putting a pre-framed wall panel into position. The employee fell 36 feet to the frozen ground below, suffering lower back fractures.",1
"An employee was throwing debris into a garbage receptacle. An old gym locker swung closed on the employee's right index finger, amputating the fingertip.",0
"An employee was on an elevated platform, kneeling while tightening a bolt on the side of a blender machine with a wrench. While leaning forward, he fell off the platform and hit his head on the ground 8 feet below.",1
An employee was operating a stand-up forklift. The forklift collided with a rack and the employee was thrown off the lift. The employee suffered a broken foot.,1
An employee was disconnecting an air line from a machine. The airline hit him on the back of the head knocking him off the machine.,1
"An employee fell while getting out of a car in a parking lot, landing on the ground and suffering a head injury.",1
An employee slipped and fell on snow/ice while delivering mail. The employee suffered a broken hip.,1
"An employee was training a new machine operator. The employee was adjusting the hardware that was to be welded when the operator triggered the welding platen while the trainer's right hand was still on the ammo box, resulting in amputations of the index finger and thumb.",0
An employee was assaulted by another employee and fell from a dock to the ground. The employee suffered a broken pelvis.,1
"An employee was holding hydraulic hoses away from an auger bit at the first floor level of an elevator pit. The support holding the auger broke and struck the employee, who then fell 6 feet into the elevator pit. He suffered fractures to the left arm and left leg.",1
"An employee was using a platform lift to pick cases of product from a freezer. The employee noticed a case about to fall from a pallet, reached to secure the case, and fell from the lift platform to the concrete floor 7 feet below. The employee suffered a head injury.",1
"An employee was walking from a parking lot to a building. While stepping from the lot to the sidewalk, the employee tripped over the curb, fell to the ground, and suffered a broken hip. The employee was hospitalized.",1
"An employee fell from a slippery roof to the ground three stories below, injuring his head. The roof was slippery due to rain and fog.",1
"On January 25, 2022, an employee was walking in a hallway when a cart caught her left foot and caused her to fall. She suffered a broken left hip and was hospitalized.",1
"An employee was cleaning up spilled polymer from a broken bag. Another bag (weight 1,980 pounds) fell from above and hit the employee, who suffered a broken right ankle and torn ligaments in the left knee.",1
"An employee was standing by as a customer loaded a truck. The banding on a bundle broke, causing 3,000 pounds of steel pipes to fall toward the employee. The employee suffered a broken leg and foot.",1
An employee was uncoupling a trailer when his right index finger was pinched between the trailer and the dolly. The fingertip was amputated.,0
"An employee was working on a roof. He fell off, landed on a concrete floor, and suffered a broken arm, a broken hip, and bruised ribs.",1
"An employee was working on a conveyor when his hand contacted the transition where an injection screw was running, resulting in a broken forearm.",1
"An employee was transferring buckets to a pallet when they fell to the floor, resulting in a fractured right hip.",1
"On January 25, 2022, two employees were filling core boxes using a sand auger. As a core box was filling, the employees noticed the leather chute, which extends from the auger opening approximately a foot, partially detached from the auger arm and was hanging by only one side. This caused the sand, catalyst, and hardener mixture to clog inside the leather chute and risked pulling off the chute completely. While the injured employee entered the auger area, the second employee went to get a pair of pliers to tighten the wing bolts used to secure the leather chute to the auger. The second employee returned with the pliers and was given the leather chute, which had been removed by the injured employee. The second employee was using the pliers to clean the cute and remove material that had hardened inside. The injured employee was attempting to push the auger arm out of the way when they slipped and their hand entered the chute opening. The
injured employee's left hand had made contact with the auger, which was still in operation, and resulted in a partial amputation to the index and little finger with a total amputation of the ring and middle fingers.",0
"An employee had been using tubing tongs to tighten loose bolts on a hanger bracket. As the employee was setting the tongs down, they triggered while the employee's fingers were between the tong clamps. The employee suffered an amputation to the right middle fingertip, as well as crushing injuries to the index and ring fingers.",0
"An employee disconnected the cam lock for a forming machine air line. The high-pressure hose struck the employee on the right side of the head. The employee suffered five broken left-side ribs, a fracture and laceration at the right temple, and a second laceration to the head.",1
"An employee was setting up a transfer pipe for hot tar, running from a kettle to a roof. Tar from the pipe splattered onto the employee, who suffered burns to his face and hand.",1
"An employee was carrying a lumber bunk up a customer's driveway using a truck-mounted lift. The lift tipped forward while its forks were being lowered. The employee hit his head on the front of the cage and fell out of the lift, suffering injuries to the forehead and face.",1
"An employee positioned himself under a piece of equipment to loosen a grease fitting, a metal fitting used to feed lubricants into a bearing under moderate to high pressure using a grease gun. The equipment slipped forward and struck the employee's right leg, resulting in a lower leg fracture.",1
"An employee was climbing down a track ladder. The employee's left foot twisted on a step as their other foot reached the floor, and the employee's shin was broken.",1
"On January 25, 2022, an employee was operating a press welder. The employee was passing tooling through the welder when their left ring finger was pinched between bars on the welder. Three-quarters of the fingertip was amputated. The machine was unguarded at the time.",0
"An employee was on a scaffold about 2 feet off the ground, installing plastic sheeting in a new home under construction. As he stepped down from the scaffold, his foot slipped and he fell to the cement floor. The employee suffered a head injury.",1
"An employee was on a portable ladder, cutting up an out-of-service storage tank with a circular saw. The employee fell from the ladder to a concrete pad about 9-10 feet below, suffering multiple fractures in both heels and a broken left ring finger.",1
"An employee was doing a maintenance check on a piece of equipment in a building. The employee tried to open a chipper hood, but the hood did not stay in place and struck the employee on the head. The employee suffered severe head injuries.",1
"An employee was holding a rope that was wrapped around a pulley. The rope moved upwards, and the employee's right distal phalanx was caught between the rope and the pulley, resulting in an amputation.",0
"On January 25, 2022, an employee was preparing an injection needle and was stuck on his finger. The finger became infected and the employee was hospitalized.",1
"An employee was placing glasses on a glass rack when the glass slipped and broke, slashing the employee's wrist. The laceration required surgery and stitches.",1
An employee was unloading a trailer. His fingertip was pinched between wood and the trailer. The fingertip was amputated.,0
Two employees were adjusting vinyl liner under a welding bar. The bar came down onto an employee's left index finger and amputated the tip.,0
"On January 26, 2022, an employee was using a hoist and clamp to lift a box scraper from a horizontal position into a vertical position. The clamp slipped off of the scraper and the scraper fell to the floor, landing directly on the employee's left foot. The employee suffered a crushing injury to the left little toe and a broken bone in the adjoining toe. The employee was hospitalized.",1
"An employee was lowering a plating rack into a drip tank from below. The employee was pushing on the rack with his hands when the rack came free and came down on top of his forearm, resulting in a crushed forearm and soft tissue damage.",1
An employee was troubleshooting a roll-up loading bay door. The door was activated while the employee's right hand was in the wheel track. The employee's right ring fingertip was amputated.,0
"An employee was attempting to hook a converter dolly to a tractor when the dolly started moving. The employee tried to steer the dolly toward the pintle hook, and their thumb got caught between dolly and pintle hook. The employee sustained a partial amputation to their left thumb.",0
"An employee slipped on ice in a parking lot and fell on his left side, breaking five ribs.",1
"An employee was preparing to move a 55-gallon drum using a drum hand truck. While using the dolly to lift the drum, the employee lost balance and walked backward into another drum, which struck his lower back. He suffered broken vertebrae.",1
"An employee was operating a machine. A bar jammed the feeding section. As the employee reached to move the bar back into place, the machine caught the employee's glove in the chain and the employee's fingertip was amputated.",0
"On January 26, 2022, at 5:08 a.m., an employee was moving a cart when she contacted a co-worker who was also moving a cart. The employee was pushed against a loading machine, resulting in injured ribs and an injured spleen.",1
"A firearm discharged while an employee was holstering it. The blast broke the employee's left ring finger, partially severing it at the base.",0
An employee was returning from a storage cabinet after retrieving items from it. The employee tripped over a drip tray and suffered a lacerated left shin.,1
An employee was adjusting a chicken opener. The machine caught the employee's left hand and amputated the tip of the employee's middle finger.,0
"At 7:30 a.m. on January 26, 2022, an employee was partially run over by a mule train as it backed up. The employee suffered a broken pelvis.",1
"On January 26, 2022, an employee was vacuuming excess fiber from equipment. The employee's finger was caught in a moving pulley, resulting in a fingertip amputation at the first knuckle.",0
"An employee had just connected a de-energized source and was descending a ladder to ground level. The employee contacted an energized line (34kV) and was shocked, which caused him to fall from the ladder to the ground. The employee suffered head injuries and burns to the right arm and back.",1
"An employee was working from a ladder washing windows when its legs began to move and it slipped away from the building. The 22-foot ladder fell; the employee fell to the ground, landing on his feet and then falling over. He suffered a crushed vertebra, two broken vertebrae, and a broken left ankle.",1
"An employee slipped on a patch of ice, fell, and suffered a broken hip.",1
An employee was doing demolition work on a bathroom. A piece of drywall with ceramic tiles fell on the employee's left arm and lacerated it.,1
"An employee was collecting samples from a production line. The employee stepped on a cap, slipped, and fell, suffering an internal abdominal injury.",1
An employee was jump-starting a luggage tug. The fan belt caught and crushed multiple fingers on the employee's left hand.,1
"On January 26, 2022, an employee was using a table router to cut a quarter-inch radius on a piece of particle board. The router bit caught the employee's left glove and amputated the employee's ring fingertip.",0
"A Turner employee had been assigned to remove exterior piping, valves, and flanges on a tank. The employee noticed flames coming from erosion holes in the top of the tank and evacuated the work area, headed for a maintenance shop. As they reached the shop, the tank exploded. The employee was knocked down by the blast and burned by the flames.",1
An employee was delivering a cabinet when they slipped on black ice and fractured an ankle.,1
"Two employees were engaged in launch and recovery operations for a remote piloted aerial system. The aircraft was launched and employees were preparing for the aircraft to touch down. The pilot of the vehicle (employee 1) and an additional external operator (employee 2), who was observing recovery operations, were both standing along the flight line. Wind conditions at the time were variable and gusty, contributing to the incident. As the aircraft touched down there was a slight bounce, during which the control surfaces were rendered ineffective, and a crosswind pushed the aircraft into employee 2. The right wing tip of the aircraft struck employee 2 just above the right ankle, which caused him to fall to the ground. This caused the aircraft to spin on the ground, and the tail of the aircraft struck employee 1 in the knees. Employee 1 sustained bruising and swelling on both knees and was treated and released. Employee 2 was hospitalized and underwent surgery for a broken right lower leg, a dislocated hip replacement, and back injuries.",1
"An employee was cleaning off a delivery truck. The employee slipped and fell off the truck's tailgate, suffering a broken hip.",1
An employee was clearing dough that was stuck in a mixer. The mixer amputated the employee's left middle finger. It was not locked out at the time.,0
An employee was trying to fix a broken pallet on the forks of a forklift. The pallet fell over and broke the employee's pelvis and right leg.,1
"An employee was on a step ladder applying duct mastic. The employee fell from the ladder to the concrete floor, suffering rib and head injuries.",1
"An employee was welding a part when his outermost shirt caught fire. He removed the shirt, but his other shirts were also burning. The employee sustained burns to his back.",1
"An employee was standing under a raised order picker. The machine lowered onto him, and he suffered broken vertebrae.",1
"An employee's left hand became caught in a pinch point on a paper roll slicing machine, resulting in a middle finger amputation at the first knuckle.",1
"An employee was inspecting and testing an aircraft antenna gimbal. The employee was using a screwdriver to replicate a failure by tapping a wire bundle located under the head of the gimbal. The head of the gimbal rocked down, causing a laceration to his right middle finger. The employee's finger sustained a partial amputation.",0
"An employee was loading pallets on a trailer at the dock. The employee entered a trailer on a rider jack, dropped their load, and began moving backward to exit the trailer. The rider jack impacted the dock plate while it was in an upward position and the employee was thrown into the dock plate, resulting in a compound fracture of their right tibia that required surgery.",1
"An employee slipped on ice in a parking lot and fell, breaking her ankle. She was hospitalized.",1
An employee suffered a broken wrist while unloading boxes from a truck.,1
An employee was using a gantry roller to press gantry plates. The machine broke the employee's left big toe.,1
"An employee was using a stand-up forklift to place a pallet on the second tier of a racking system. The boxes on the pallet hit the third-tier shelf and started to fall. The employee lowered the pallet and struck the second-tier shelf, which caused the pallet to tip. The employee quickly moved the lift back and lowered the pallet. The employee then stepped off the back of the lift, which moved, pinning him against the racking behind him. He suffered a broken leg.",1
"An employee was moving a cart when her right middle and ring fingers were caught between the cart and the side of the facility vertical racking, resulting in amputation of the middle fingertip and a partial amputation of her ring finger.",1
An employee was entering the front door prior to the store opening. She attempted to close the sliding doors behind her and her hand slipped off the door and she fell backward to the floor. The employee sustained a fractured hip.,1
An employee was marking sows with crayon when they were exposed to fumes from aluminum alloy and/or marking paint. The employee experienced difficulty breathing and was hospitalized.,1
"An employee was collecting shopping carts in the parking lot. When they stepped on a curb, the employee lost balance and fell to the ground, resulting in a broken right hip.",1
"An employee had just begun driving a truck down a lease road. The truck had driven about 350 feet when a flash fire began in the cab, causing second-degree burns to the employee's face and hands.",1
An employee tripped and fell to the floor. They were hospitalized with a possible broken bone.,1
"An employee was shocked while troubleshooting a fan powered box, part of a hospital's HVAC system.",1
An employee was 8 or 9 feet up a ladder when it slipped on the concrete floor. The employee fell to the floor and suffered a broken left wrist and elbow.,1
"At about 8:30 a.m. on January 27, 2022, an employee was clearing a jam in a machine. While he was kneeling beneath a metal pocket on the machine (about 4 feet high, weighing about 10 pounds) that held parts, the pocket was lifted up off the chain and fell out, striking the employee on the head. He suffered a head laceration, a skull fracture, and internal bleeding and was hospitalized.",1
"Two employees were using a rear-load garbage truck to collect residential solid waste in a new construction community, where there were roll-off containers along the roadway. As the truck passed a roll-off container on the right and the pass narrowed, employee 1, who was standing on the passenger-side rear riding step, pulled himself closer to the truck to avoid the container and wrapped his left leg around the back of the truck and rested his foot on the hopper seal. The sweep compactor began running while his foot was still resting on the seal, and the tip of his left foot was caught in the compactor. Employee 1 sustained a partial amputation to his left big toe and a fracture to his left second toe.",0
"An employee was using a ladder to check an HVAC unit when the ladder slipped, causing them to fall approximately 20 feet to the ground below. The employee sustained a shattered hip and a broken ankle.",1
"An employee slipped on ice in a parking lot and fell, suffering a broken left ankle.",1
"An employee was loading and unloading furniture off trucks in the back loading area of a store. The employee and a co-worker were engaged in an argument when the co-worker drove a company vehicle over the employee, dragging him several feet. The employee suffered several broken bones, including his legs, an arm, and a hip. He also suffered head, neck, and eye trauma, including lacerations. The injuries required hospitalization and multiple surgeries.",1
"On January 27, 2022, an employee was operating the south stunner when his right arm was caught between the framework of the double gate that separates the hog alley from the front of the stunner, resulting in a forearm fracture. The employee was hospitalized for surgery.",1
"A Freehold Cartage, Inc., tank truck driver was loading flammable liquid from a storage tank. Shortly after loading began, the driver noticed the hose was jumping, indicating a interruption in product flow. After the pump was turned off the employee was told it was safe to disconnect the line, he released a clamp on the hose driver and was splashed with chemical. He suffered a second-degree chemical burn.",1
"An employee was adjusting product on a conveyor belt when their fingers contacted the end nip point, resulting in an amputation to the tip of their left thumb.",0
"An employee was cutting fiber fill with a handheld circular blade fiber cutter when the rotating blade struck their right index finger, resulting in a fingertip amputation.",0
"An employee fell while climbing down from the cockpit of an airplane. The employee landed on the hangar floor and suffered a broken tibia, a broken fibula, and a hairline fracture in the heel. The employee was hospitalized, requiring surgery.",1
"An employee was walking past a display board when they tripped over the support legs and fell, resulting in a broken left hip that required hospitalization.",1
"An employee was attempting to stop a ladder from swinging when his thumb was caught between the ladder and the wire rope securing the ladder, resulting in an amputation.",0
An employee was brazing stainless steel when a spark contacted her shirt and set it on fire. The employee suffered second degree burns on her right hand and the inside of her right forearm.,1
"An employee was using a manual hydraulic lift to transfer a program participant into a wheelchair, and the battery needed replacing. When the employee engaged the replacement battery, the battery failed, and the employee suffered thermal and chemical burns.",1
"On January 28, 2022, an employee was removing an extra bar of steel stock that was fed into a bar stock feeder. The bar of steel stock fell approximately 1 inch onto the employee's left ring finger, resulting in a partial amputation.",0
"An employee was loading fiber board panels onto a conveyor belt when a board jam occurred. When the employee attempted to clear the board jam, the right sleeve of his jacket was caught by the machine, resulting in multiple fractures to his right arm.",1
"An employee and three co-workers were working to cover a second-story deck with a fiberglass waterproofing membrane. A two-by-four wooden plank was placed between the second-story deck under construction across to an adjacent second-story deck to walk back and forth between the decks via the plank. The employee attempted to walk the plank when the plank snapped and he fell approximately 10 feet to the ground, striking his chest on lower deck framing before hitting the ground. The employee suffered a chest injury and broken ribs.",1
An employee was inspecting a cross country ski trail when their right ski tip was caught on a sapling tree. The employee sustained a torn medial collateral ligament and a sprained anterior cruciate ligament.,1
"Employee 1 was being trained on operating a powered industrial truck (PIT). The forks from Employee 1's PIT went into the operator's compartment of the trainer's (Employee 2) PIT and struck Employee 2's right heel, resulting in a calcaneus fracture.",1
"An employee sustained steam burns to their hand and wrist, resulting in hospitalization.",1
"An employee was helping with a kelly bar and dipping bucket. The employee's left hand was on the sleeve of the kelly bar, and the sleeve was raised about 3 inches above his hand. The kelly bar operator attempted to level the kelly bar to lower the head into the dipping bucket. The sleeve closed, crushing the employee's left index, middle, and ring fingers. The employee's left middle and ring fingers were amputated.",0
"An employee was using a stock chaser ladder to retrieve a part from stock. The employee fell to the ground, and the part struck her in the face, resulting in a laceration and fractures to her face and teeth.",1
"An employee was attempting to fix the autoloader on a binding machine when his right ring finger was caught in the machine's belt and pulley, resulting in a partial amputation.",0
"An employee was power-washing a concrete wash-out trough when an automated traveling bucket returned and struck him in the back, pinning him between the bucket and the washout area. The employee sustained crushing injuries to the pelvis and abdominal area, as well as torn ligaments.",1
"An employee was mopping the floor when they slipped and fell to the floor, resulting in a fractured hip.",1
"On January 28, 2022, an employee got frostbite and was hospitalized.",1
An employee was helping bring in groceries for residents at a group home. The employee tripped and fell on a case of water when attempting to step over it. The employee impacted the floor and suffered a broken hip and a disconnected tendon.,1
"An employee was standing on a stack of drywall covered by cardboard while installing insulation. The employee fell off the drywall to the floor below, resulting in a dislocated ankle with fractures.",1
"On January 28, 2022, an employee was unloading feed at a dairy farm when his right hand was pulled into a vertical auger, causing his fingers to be crushed. His index and ring fingertips were amputated.",1
"An employee was using a valve stem to slow the flow of chemicals from a railcar tanker to a truck tanker when his finger got caught between the valve stem and the railcar tank, resulting in a partial amputation.",0
"An employee was operating a rolling mill to roll square tubing. The employee's right hand became caught in the machine, resulting in the amputation of his right hand.",1
"An employee was collecting garbage when they slipped on ice and fell to the ground, resulting in a fractured hip.",1
"An employee was setting up the wood shaper to cut raised panels for a custom, built-in project. The employee, as part of the set-up process, was running scrap wood through the shaper after every  adjustment to check the depth of cut. The employee pushed a piece of scrap wood through the shaper after an adjustment to the cutter head. When the employee's hand was above the cutting head, the cutting head was bound on the wood and pulled it down, rolling it into the cutting head. The cutting head then came through the upper surface of the wood and amputated the employee's left ring finger to just below the first knuckle, the left middle finger to the first knuckle, and the left index finger to just below the nail bed. The cutting head was not guarded at the time.",0
"An employee attempted to clear a jam on a packaging line when their right arm became caught in the line, resulting in a broken arm.",1
"At approximately 8:30 p.m. EST on 1/28/2022, an employee noticed some ""heavy stock"" coming through the product being run on the line and notified the Machine Tender. The Machine Tender proceeded to the wet end and performed a visual inspection of both the forming and saturator sections. The Machine Tender saw some stock (microfiber) coating an outside roll on the saturator section of the machine. The Machine Tender crawled under the machine frame to gain access to the roll and started to remove the fiber off the roll. Toward the back of the roll, the employee's hand and arm were pulled into the nip point formed by the saturator wire and roll. The employee's arm was fractured.",1
An employee was cutting pipe using a bandsaw and amputated their left index fingertip.,0
"An employee was stacking a tower and using a wooden board to align the tower. When the tower fell into place, the employee's left middle finger was crushed under the wooden board and the weight of the tower (about 4,000 pounds). His left middle finger was amputated at the first knuckle.",0
"An employee was attempting to wrap a finished coil. There is paper suspended above employees when they wrap coils, and the paper is included in the wrapping on the part. The employee's hand became caught between the coil and the wrapper roll. The wrapping machine cycled and crushed the employee's left hand. The employee was hospitalized, and surgery was required.",1
"An employee was operating a stump grinding machine when the machine discharged a piece of debris, which struck the employee's kneecap. The employee sustained a laceration and the debris had to be surgically removed.",1
"On January 28, 2022, an employee rigged an 830-pound metal hook block onto a table to flip and remove a bracing. The block shifted as it was being flipped and caused the chain to slack. The momentum of the weight caused the block to fall forward and pin the employee's hand between the brace and a piece of wood, resulting in amputations to their left index and middle fingertips.",1
"An veterinary employee was checking on a patient (dog) 45 minutes after they were sedated, when the dog bit the employee's hand, resulting in hospitalization.",1
"An employee was removing bolts from a wellhead tree when the tree fell onto his left leg, resulting in lower leg fractures.",1
"On January 29, 2022, an employee was walking through a digester area to return a piece of equipment and have it serviced when he fell about 2.5 feet into an uncovered u-drain. The employee contacted the hot condensate (about 180 degrees) that flows through the u-drain, resulting in second- and third-degree burns below both knees. The employee was hospitalized.",1
An employee's left hand fingers became caught in a chain on a cotton module truck.,1
"On January 29, 2022, at approximately 8:06 p.m., an electric pallet jack operator was injured when he was pinned between the pallet jack and storage racking shelves. The employee sustained a laceration to the calf and fractures to the tibia and fibula.",1
"An employee was sitting in an office chair. The chair collapsed, and the employee fell to the floor, resulting in a broken left hip. The employee was hospitalized, and surgery was required to repair the injury.",1
"On January 29, 2022, at approximately 4:15 p.m., an employee was walking on his postal route when he slipped on an ice-covered walkway and fell to the ground, resulting in a compound fracture to the lower right leg. The employee was hospitalized and required surgery.",1
An employee was exiting a skid steer when they slipped on the wet equipment and struck their head and neck on the bucket. The employee sustained contusions to the back of their head.,1
"An employee was pushing a hand cart. When he crossed the T-cart aisle with the hand cart, the hand cart contacted a T-cart, pinning his left leg between the cart and the wall. The employee sustained a broken left leg.",1
"An employee was setting up a CNC burn table. He was lighting the heads with a striker when his pant leg caught fire, causing burns to his thigh and hand. The employee was hospitalized.",1
"On January 29, 2022, at 8:15 a.m., an employee was carrying machine parts for a milling machine while entering a building at the first-floor stairwell. The employee was tripped by the door and the machine parts he was carrying fell. As he tried to catch the parts, the employee's right hand was crushed between the parts and the concrete wall, resulting in lacerations to the ring finger and an amputation of the little finger.",0
"Two employees were working together to rotate a wellhead adapter. Employee 1 was using an overhead hoist and lifting strap to lift one side of the adapter and place it on its opposite side. Employee 1 began to lower the adapter down, and Employee 2's left middle finger was caught in a pinch point between the lifting strap and the part, resulting in a fingertip amputation.",0
"A maintenance employee was working on a high-speed rollup door when his hand and arm were pulled into the door roll area, resulting in a compound fracture to his right forearm.",1
An employee was walking through a work area when they tripped over a support and fell to the ground. The employee sustained a broken left femur and was hospitalized for surgery.,1
"An employee driving a utility tractor rig vehicle (PIT) in the container yard collided with a light pole. The employee sustained a fractured sternum (from striking the steering column) and lacerations to his lip, face, and tongue (from the broken windshield).",1
An employee was inspecting a transformer at a facility when they were shocked. The employee was hospitalized with burns.,1
"An employee was placing a shrink wrap cover over a boat when he fell off the boat, hitting his head on the concrete floor.",1
"An employee was raising a flat metal salt platen out of a cracking hopper using a hoist hook when the platen came off the hoist hook, fell, and landed on the employee's hand. The employee suffered crush injuries to their index and middle fingers, resulting in amputation of the index finger.",0
"An employee was climbing an 18-foot fixed ladder to access a working platform that runs across railroad tracks. As the employee neared the top, he fell approximately 14 to 15 feet to the ground below, resulting in a broken left femur and hip and a fractured L2 vertebra.",1
"An employee was operating an ATV/UTV and had an accident, resulting in fractured ankles.",1
"On January 29, 2022, at approximately 2:30 PM Central time, an employee was cleaning a conveyor when his right middle finger was pinched between a chute and the conveyor, resulting in a fingertip amputation.",1
"An employee was moving a box of overstock to an overstock cart when he slipped and fell to the floor, resulting in a left hip fracture.",1
"An employee was walking across a pallet when she fell to the ground, resulting in a left ankle fracture.",1
"An employee was closing a door in the security office when wind blew the door shut on their right ring finger, resulting in a fingertip amputation.",0
An employee was walking down an aisle and was struck by a forklift. The employee was hospitalized for fractured ribs and a fractured pelvis.,1
"An employee was removing metal from an edge when he fell from a flat roof to the ground, resulting in a fractured arm and rib.",1
"An employee was working to connect a tote-size sac of crystalline chemical to the iris of a process feed chute. The crystals feed down the chute through the iris, then through a rotating vane valve. There are two panels covering the vane valve. The sac of crystalline chemical emptied down the chute just halfway before the crystalline chemical got blocked. The employee opened the panel covering the vane valve to unblock the material. The valve vane amputated the employee's right index finger down to the knuckle.",0
"An employee was operating a hydraulic roller. While the employee was ensuring resin was spreading evenly and moving the suction hose, he fell backward and his foot was caught in the hydraulic roller. The employee was hospitalized with a broken foot, which required surgery.",1
"An employee was operating a utility vehicle when he was struck by a car in a parking lot. The employee's knee struck the ground, resulting in a fractured knee cap. The employee was hospitalized.",1
"An employee was working on a ladder when they fell to the floor below, resulting in a proximal tibia shaft fracture.",1
"Three employees were changing a fan motor on a platform. The employees removed the old motor and lowered it through an opening in the catwalk/platform that was approximately 4' x 4' using a chain hoist. They then hoisted up the new motor and were securing it into place. Employee 2 called employee 1 to look at the alignment of a series of pulleys to make sure it was correct. When Employee 1 stepped around the motor, they stepped into the opening in the platform. Employee 1  grabbed onto Employee 2 pulling him into the hole in the platform as well. Both employees fell approximately 12 feet to the platform below and employee 1 struck the old motor that had been removed. Both employees suffered broken bones, contusions, and abrasions. Employee 1 was
hospitalized for a broken pelvis.",1
"An employee was cutting lumber using a table saw when the saw contacted his left ring and little fingers, resulting in lacerations requiring surgical amputation of both fingers.",0
"An employee jumped off a skid steer, landing on the ground about three feet below. The employee suffered a fractured left tibia and fibula.",1
"An employee was using a remote controlled boom loader attached to a truck to unload metal studs. One of the metal studs fell and hit the ground, striking the employee's left leg. The employee suffered fractures to their left fibula and tibia, and they were hospitalized for surgery.",1
A hotel employee was cleaning a guest room when they drank from a bottle left by a guest. The drink had THC in it and the employee became ill and was hospitalized.,1
"An employee was working from a lift basket installing valley backing for roof trusses. He was cutting a piece of valley backing with a circular saw when the saw blade cut his left wrist, damaging his nerves and tendons.",1
"An employee was descending a mountain on skis during a station switch. The employee got lost in a ""white-out"" area and sustained frostbite on both hands.",1
"An employee was working on a computer numerical control (CNC) machine when his right hand became caught in the machine, resulting in a partial amputation of his index and middle fingers.",1
"An employee lost their balance while closing a trailer door. The employee put his left hand down to catch himself when the door came down on his left hand, resulting in a broken middle finger and ring finger.",1
"An employee was using an unlocking pole to remove a stuck cone on a container. The twist lock fell down and struck the employee in the face, causing them to lose consciousness.",1
An employee was loading a tire into a tire press. The press ring popped out and the employee's hand was crushed between the lock ring and the head of the press.,1
"On January 31, 2022, a temporary employee was turning a pallet jack. During the turn, the material started to tilt. A second temporary employee attempted to catch the tipping skids and falling material, but they were crushed by the falling material. The employee sustained two broken ankles, a broken rib, a broken wrist, and a broken knee.",1
"An employee was grinding on metal when sparks from the grinder caught their shirt on fire, resulting in burns on the right side of the employee's upper torso.",1
"An employee was walking in a processing area when they slipped and fell to the floor, resulting in a left femur fracture.",1
An employee was unloading an electrical unit from a truck when they sustained a right ankle fracture.,1
An employee was working on a main circuit breaker box when the breaker box exploded and the resulting fire caused second-degree burns to his right hand.,1
An employee was pulling rolls out of a slitter machine when their left middle finger was partially amputated by the machine's pounder.,0
"On January 31, 2022, an employee was loading product onto a pallet when they were struck by a tow motor load. The employee was hospitalized with bilateral leg injuries.",1
"An employee and several co-workers were trying to push a work van out of a snow embankment when a wooden board from underneath the van flew out and struck the employee's leg, resulting in a broken leg.",1
"An employee was operating a crane with a wireless remote to move a steel beam in order to paint the bottom of the beam. The beam was set on saw horses. The employee clamped on the beam. The beam fell off the saw horses and landed on the employee's legs. The employee got pinned between the beam and a trailer that was behind him, where beams would be loaded after painting. The employee suffered two broken bones in their left leg below the knee and one broken bone in their right leg.",1
"An employee had just lowered a spreader bar using a crane. When he removed the hook and raised the crane, it clipped the spreader bar and caused it to tilt over, landing on his left foot. The employee was hospitalized with a left foot fracture.",1
"An employee was walking when they were struck by a forklift, resulting in injuries to both lower legs.",1
An employee was walking across the work site when they were struck by a forklift resulting in multiple fractures and cuts to their leg.,1
"An employee was attempting to remove bags that were stuck in a delivery unit when their left little finger got caught between the delivery unit and the end of the metal guard, resulting in amputation of the fingertip.",0
"An employee was installing conduit from a 10-foot ladder when he fell to the concrete below, resulting in a fractured skull.",1
"On February 1, 2022, an employee was using a ladder to gain access to the porch work area when they fell from the ladder, resulting in a broken leg.",1
"An employee was working at an automated towel facility. As the employee was performing maintenance on a small piece towel folder, his right hand was crushed in a moving drive chain, resulting in amputation of his little finger.",0
"An employee was standing on the first level of scaffolding wearing his hardhat when he was hit by a tile that came off the balcony from the fourth floor. The impact caused him to fall from the scaffold to the ground 6 feet below, resulting in a broken clavicle.",1
"An employee was working in a test bay disassembling an iron spool when the spool shifted and his left little finger got caught between flanges, resulting in a degloved finger that had to be partially amputated.",1
An employee was driving an empty battery powered stand-up forklift through an open space between pallets when the inside of his right foot struck a piece of stored furniture that was sticking out from a pallet. The employee suffered a contusion to his inner ankle as well as an ankle sprain.,1
"An employee was using a 10-foot ladder to install fiberglass into a variable air volume box when the employee fell from the ladder to the ground below, resulting in a fractured pelvis and a broken hip.",1
"An employee was operating a vehicle lift when his right index finger became caught in the lift, resulting in a fingertip amputation.",0
"An employee was clearing stuck wood from an upcut saw when their foot activated a pedal and their right index finger contacted the saw blade, resulting in a fingertip amputation.",0
"An employee was preparing steel beams for painting using a grinder when he fell off the scaffold or the structure he was working on and landed on the floor, resulting in fractures to the upper and lower right arm.",1
"An employee was leaving work when she slipped on an icy walkway and fell, resulting in a fractured hip.",1
"An employee was stepping out of a commercial vehicle when he missed the bottom step and lost his grip, falling backward to the ground and landing on his back. The employee suffered a possible lumbar fracture, brain swelling, and a possible hematoma.",1
"An employee was using a ladder to place a cell booster on the top of a job trailer. As the employee was descending the ladder, it slipped and the employee fell approximately 13 feet down the ladder, resulting in a broken ankle.",1
"An employee and a co-worker were working to pack up pallets on pallet banding equipment. The co-worker was holding the strap as the employee was utilizing a clamp. The employee's right thumb was caught in a pinch point on the clamp, resulting in amputation.",0
"An employee was repairing a wooden pallet using a pneumatic nail gun when a nail was shot through the employee's left thumb, causing a puncture and fracture to the bone.",1
"An employee was putting load locks on a refrigerated freight trailer when they slipped and fell from the back of the trailer to the ground below, resulting in a dislocated right shoulder, a fractured left tibia, and three fractures in their right foot.",1
"An employee was loading a skid steer machine. Upon exiting the cab of the machine, his leg got caught on the step and he fell, resulting in a broken leg.",1
"An employee was walking toward a building in a parking lot when they slipped on ice and fell, resulting in a broken femur.",1
"An employee was working at a muti-injector machine when it became clogged. The machine moved as she was unclogging it, resulting in a right index fingertip amputation.",0
"An employee was trying to adjust a forklift jib extension. The extension slipped after the pin was removed and the employee's hand was caught in a pinch point, resulting in a crushed right hand with possible broken fingers.",1
"An employee was loading boxes into a truck when a box broke and a metal item fell out of the box and onto the employee's big toe, resulting in an injury that required hospitalization and amputation.",1
"An employee was standing on the back of a truck's lift gate while helping to move IT equipment when they fell from the lift gate as it was moving upward, resulting in a head injury.",1
"An employee was in a shopping cart being pushed by co-workers when the cart turned over and the employee fell to the ground, resulting in a dislocated right knee.",1
"An employee and two co-workers were spraying pipes with a water and soap mixture while attempting to repair a reported possible gas leak. The employee was working from a 10-foot A-frame step ladder when they fell approximately 6-7 feet from the step ladder to the ground below, resulting in a broken tibia or fibula in their right leg and a dislocated right ankle.",1
An employee was using a circular saw and a saw horse to cut stakes out of 2x4 boards when the saw blade partially amputated the employee's left thumb.,1
"An employee was assessing a job site when they slipped on an icy roof and fell on the roof surface, resulting in a broken left tibia and fibula.",1
"An employee was performing work on a transformer pad approximately 10 feet from a roadway when they slipped on ice and fell, resulting in a fractured leg that required hospitalization.",1
"An employee was exiting their vehicle when they slipped on ice and fell, striking the back of their head.",1
"While an employee was helping out on the sales lot, ice and snow got into his shoe. The employee was hospitalized with frostbite on his foot.",1
"An employee was unloading food from a truck to a freezer. The employee suffered back pain. He went home, but was later hospitalized for a back strain.",1
An employee was in the receiving dock area unloading materials from a truck trailer using an electric powered industrial truck (PIT). The raised forks of the PIT struck the injured employee causing a fractured right ankle.,1
"An employee was redressing a 3.5"" setting tool. In order to stroke the tool, he slammed the end of the tool down on an outrigger mat. His right ring finger slipped inside the setting sleeve on top of the tool. The mandrel inside moved upward when the tool was slammed and amputated his right ring fingertip.",0
"An employee was reshuffling 55-gallon metal drums to be restocked when his left  ring finger was smashed between two drums, resulting in hospitalization and a fingertip amputation.",1
"An employee was on his daily route picking up specimens from clients' offices. As he was walking into a building, he tripped over a bicycle anchor located to the side of the building's main entrance. The employee fell on the brick pavers, resulting in a fractured left hip that required hospitalization and surgery.",1
"An employee was loading boxes onto a conveyor when the conveyor stopped. When the conveyor belt restarted, it struck the employee's right hand, resulting in a partial amputation of the right little finger.",1
"While installing a metal channel post, an employee secured the post in a vertical position with his hands while a co-worker struck the top of the post with a sledge hammer. A post cap was placed on top of the post to prevent damage to the post and to protect workers. When the employee determined the channel post was driven deep enough, he told his co-worker and proceeded to remove the post cap with his left hand when the head of the hammer struck the employee's hand and crushed it against the post cap, resulting in broken bones.",1
"An employee was moving an appliance with a hand truck, slipped on water that another appliance had leaked, and fell. The hand truck and appliance fell on him. The employee suffered multiple fingertip amputations as well as back and abdominal injuries.",1
An employee suffered a heart attack while shoveling snow.,1
"An employee was moving a copper coil to a staging area. This movement utilizes a machine-driven, slow-moving coil car running along a track. When the coil reached the employee's location, the coil pinned them to the guard rail, resulting in burns and a pelvis fracture.",1
"An employee and a co-worker were performing asbestos abatement on pipes up in a roof area. The co-worker and employee had just lowered the manlift bucket to the ground when they heard the roof crashing down and ducked inside the bucket. The roof trusses gave way from heavy snow and rain. The employee's left thumb was smashed on the side of the bucket by a roof truss, resulting in an amputation.",0
"An employee was coiling conduit wires into an energized electrical pull box. A terminal block inside the pull box arc flashed and the employee's shirt caught on fire. He suffered burns to his hands, left arm, and neck.",1
"An employee was performing maintenance on lab test area doors that move up and down to allow units on a conveyor belt to enter. A unit was on the conveyor and got stuck under the door when the door closed on top of it. The employee used a pipe to pry the unit loose and push it out from under the door. When the unit moved, the door shut and slammed the pipe down onto the employee's right index finger, resulting in an amputation through the middle phalanx.",0
"An employee was in the bucket of a truck boom in the middle of three lateral tap lines running across the road. The employee used a bucket stick to de-energize the last tap line. The employee then swung the bucket back to where the truck was positioned, which placed the boom above the neutral system and de-energized wire, and where a cut-out was located above the neutral system. The employee's left shoulder contacted the top side of the cut-out and the employee suffered three electrical shocks, resulting in burns to neck, back, and chest. The employee's left arm was medically amputated up to the neck area, and their right arm was amputated below the elbow.",0
"An employee was using a circular saw to cut plywood when the saw kicked back and struck the employee's left finger, resulting in a fingertip amputation behind the nail.",1
An employee was raising a lift gate on a truck and got their hand caught in a pinch point resulting in amputation of their ring and middle fingers.,0
"An employee attempted to unclog a cheese conveyor when their fingers contacted a moving auger, resulting in two fingertip amputations. The conveyor was not locked out at the time of the incident.",0
"An employee was performing loading operations on a tanker truck when they fell 11 feet and 2 inches from the truck to the ground between the caged gangway access and the truck, resulting in fractures to the left wrist, orbital cheek bone, and pelvis.",1
"An employee was taking out the trash when she tripped and fell in the vestibule area, resulting in a broken right leg.",1
"An employee was installing the correct chute onto a sand auger spout. Their index, middle, and ring fingers contacted the moving auger, resulting in amputations of all three distal phalanges.",0
"An employee was entering the workplace when she slipped on ice and fell, resulting in a broken bone in her leg.",1
An employee was descending a fixed ladder when they fell approximately 6 feet and landed on their tailbone. The employee sustained fractured vertebrae.,1
"An employee was using a pneumatic miter saw to cut vinyl strips. The employee attempted to lift a strip of vinyl when it got caught in the grooves of the saw and the employee's left hand was struck by the saw blade, resulting in a laceration between the index finger and thumb.",1
"On February 2, 2022, an employee was removing dust from a dust collection system when two of their left-hand fingers made contact with a paddle device on the dust collection system, resulting in fingertip amputations.",0
"An employee was being trained on a double-end cut-off machine. The employee climbed under the machine to clean it. When he reached up toward the sensor, his hand became caught in the in-feed roller, resulting in amputation of the left ring finger.",0
"An employee was grabbing and loading boards off a conveyor and onto a cart. After loading a board onto the cart, the employee turned to grab another board when their right hand was caught between a pusher piece on the conveyor and the metal frame of the conveyor, resulting in a surgical amputation of their index fingertip.",0
"On February 2, 2022, an employee was cleaning out a hopper that connects to a screw auger system used to charge solids to the main reactor vessel when the screw auger caught the tip of their left thumb, resulting in a fingertip amputation.",0
"An employee was pushing floor blocks through a bandsaw when the bandsaw shifted and contacted his index finger, middle finger, and thumb. The thumb was amputated from the knuckle up, while the index and middle fingers were surgically repaired.",1
"An employee was checking on a fault in the baghouse of a dust collection system. As the employee was opening and closing the door to the baghouse, a flash fire occurred. The employee suffered burns from the waist up.",1
"An employee and two co-workers were manually positioning an 833-pound portable dock plate. While lowering the portable dock to its installation position, it fell and pinched the employee's right middle finger, which resulted in amputation of the distal tip of the finger.",0
An employee was cutting a 2x4 with a circular saw and amputated their left index fingertip.,0
"An employee was moving 20-30 reams of paper on a push cart. While going down a hill, the cart hit the employee and pinned his knee between the cart and a wall, resulting in a knee injury that required surgery.",1
"An employee was struck on their fingers by boilers that fell while being lifted by a forklift, resulting in an amputation.",1
"A city mail carrier was stepping down into a driveway. When he stepped onto a brick retaining wall, its bricks gave way and he fell to the gravel below, suffering a broken right arm and a sprained left knee and ankle. He was hospitalized.",1
"An employee was running cardboard boxes through a printing press. While wiping off excess ink, his left hand got caught and pulled into rotating rollers resulting in amputation of his left middle finger and partial amputations of his left ring, index, and little fingers. His left hand was also degloved. The employee was hospitalized.",1
A temporary employee was working in the bakery mixing area. The employee attempted to clear a pita from the conveyor belt and suffered a right index finger amputation.,1
"An employee's hand was pulled into the rollers of a laminator machine during a cleaning cycle, resulting in an amputation to their right index fingertip.",0
"At about 2:30 p.m. on February 3, 2022, an employee fell to the floor while stepping down from a lift after using it to pick up items. The employee suffered a broken foot.",1
"An employee was moving a water heater on a dolly when the dolly tipped and the water heater fell on the employee, resulting in injuries to their spine, chin, and right leg.",1
"An employee was cleaning the floor when they tripped over the mop bucket and fell to the floor, resulting in a neck fracture.",1
"An employee was using a powered industrial stacker to move completed pallets of blended product from the manufacturing area to the warehouse. The employee tripped and fell to the floor, inadvertently moving the throttle of the powered industrial stacker and causing it to move forward and crush his right foot. The foot was surgically amputated.",1
"An employee was walking on the bottom floor of a plant when they stepped into a drainage ditch that contained hot process materials, resulting in second degree burns to his right foot and ankle.",1
An employee was preparing for duty at an ambulance station when she inhaled an unknown residual powder from foam insulation in the back of the ambulance after opening a medication storage box. The employee was hospitalized after experiencing respiratory distress due to pulmonary edema caused by an anaphylactic reaction.,1
"An employee was sorting bread on a packing line. The employee attempted to remove bread from the gear box of the packing line when their right middle and ring fingers were caught between the sprocket and chain, resulting in two fingertip amputations.",0
"An employee was moving eight pieces of 3x3x1-foot and 4-foot-by-24-inch tubing material with a crane and setting it on the conveyor for cutting staging. When he removed the chain sling, three pieces of tubing fell off the rollers, hitting him in the lower left leg and causing a compound fracture.",1
"On February 4, 2022, at approximately 9 p.m., the building filled with smoke and an employee used a fire extinguisher to put out the fire as the sprinklers were activated. The employee was hospitalized for smoke inhalation.",1
"An employee was operating a vertical turret lathe that was rotating at approximately 22 RPM. While standing on an elevated work platform, the employee leaned over toward the lathe when his arm was struck by a rotating magnet that was attached to the lathe. This impact caused the employee to fall forward and become caught between the vertical turret lathe table chuck and the back of the turret wall. The employee suffered a lacerated spleen, fractured scapula, bruised brachial plexus, fractured ribs, and head lacerations. The lathe was equipped with a chip guard at the time of the incident.",1
"An employee was using a hand cart to deliver supplies to a patient's home. The employee was bringing in the final load on the cart when they slipped on ice and fell. The hand cart fell on them, resulting in a fractured right leg.",1
"An employee stepped off of pavement onto icy grass and then slipped and fell, resulting in a fractured leg that required hospitalization.",1
"An employee was entering the building when a gust of wind slammed the exterior door into the employee's hand as they tried to stop the door, resulting in a fingertip amputation.",0
"An employee was adjusting a manhole sewer lid when their left thumb was pulled in between the lid and the manhole sewer ring, resulting in a fingertip amputation.",0
An employee was clearing a jam in a wrapping machine when they sustained an amputation to their left middle fingertip.,0
"On February 3, 2022, around 11:20 a.m., and employee was using a crimping machine to crimp ferrules onto wires when the machine contacted their left index finger and crimped it, resulting in a fingertip amputation.",0
"An employee was using a ladder to place merchandise on an elevated rack when they fell backward off the ladder, resulting in an injured left hip.",1
An employee was preparing food when a kettle of hot water spilled on the employee's feet. Both feet were severely burned.,1
"An employee was walking from their car to the building. As they stepped from a gravel area to the pavement, they slipped on ice and fell into the gravel area, resulting in a fractured and dislocated right ankle.",1
An employee was assisting two co-workers in unloading a pallet jack from a pickup truck bed. The pallet jack began to fall and the employee reached to stop it when his hand went into the pallet jack and his fingertip was amputated by the force of the pallet jack falling down onto his finger.,0
An employee was working on a tube trimmer and amputated a fingertip.,0
"An employee was using a machine to add tread to a commercial tire casing. As the employee removed the spliced tread from the rollers, their left thumb contacted a retracted blade on the machine and they suffered a partial amputation to their left index fingertip.",0
"On February 4, 2022, at 1:15 p.m., an employee was strapping material when she placed a banding tool above her head on top of a bundle of lumber. When the employee was bending over, the banding tool fell and struck her in the head, resulting in a head injury.",1
"An employee was working on a 10-1/2-foot-high scaffold to perform pipe fitting duties when they fell to the ground, resulting in a fractured back, fractured ribs, and a head laceration.",1
An employee was cutting meat on a bandsaw when the saw amputated their fingertip.,0
"An employee was walking through a turnstile gate when they slipped on the icy walkway and fell, hitting their head and back and resulting in a head injury.",1
"An employee was installing ductwork for an HVAC system while on top of a 10-foot ladder when they fell to the ground, resulting in injuries to the head, shoulders, and back. The employee also suffered a laceration to his hand from trying to grab onto a sheet of metal.",1
"An employee was sweeping pieces of fiber fill into a reclaim vacuum hose. The employee's hair was caught in the rotating shaft of the reclaim motor, resulting in a scalping injury. The employee was hospitalized.",1
"An employee was walking backward to check on a sensor on an asphalt machine when he stepped onto a manhole cover that gave away. The employee slipped and fell onto the side of the manhole and the hot asphalt, resulting in a back injury and burns to his arms.",1
"An employee was cutting meat with a handheld knife when the knife slipped off the meat and struck his abdomen, resulting in a cut to his intestine.",1
"An employee was climbing a pole to pick up a powerline that was downed due to a storm when their hand contacted a 7,200-volt distribution line, resulting in an electrical shock.",1
"An employee was unloading crane parts for setup when the boom of the crane went vertical and the crane pendant line slid off and landed on the employee's right foot, resulting in five broken toes.",1
Two employees were servicing a manual loading cartoner that is used to pack and seal oat bars. The machine's chain and sprocket system seized up. The equipment was locked out for maintenance. They then began jogging the machine from the control panel 20 feet away. This did not work so the injured employee tried to free the direct drive and cycle the motor when the machine energized and began rotating counter clockwise. This caught the injured employee's right index fingertip between the chain and sprocket resulting in amputation without bone loss.,0
"An employee was troubleshooting an airlock screw. The airlock's rotating blade struck the employee's right index, middle, and ring fingertips, resulting in partial amputations.",0
"An employee and a co-worker were unloading units that were stacked inside an import container and then loading the units onto forklifts. One stack would not slide out. The co-worker lifted the top four units as the employee fed a cinch strap into place, so it could be used to pull the material out. The strap was secured to the forklift. The employee was readjusting the strap when the forklift moved. The cinch strap was pulled from the employee's hand, resulting in amputation of the right index fingertip and loss of the nail.",0
"An employee was walking around the corner of a nurses' station to enter an adjacent hallway when she tripped over the leg of a piece of equipment, fell on her knees, and then hit her head and face on a wall and the floor. The employee suffered closed head injuries that required hospitalization.",1
"An employee was assisting a customer with a large ground heater that wasn't working when a 4-by-8-foot sheet of plywood fell three stories and hit him in the shoulder, resulting in a fractured scapula and ribs on the right side.",1
An employee was walking to his vehicle after his shift when he slipped on ice in the parking lot. The employee sustained a broken right leg requiring hospitalization and surgery.,1
"An employee was walking through a parking lot looking for a rental car for a customer. The employee walked down the parking lot steps and slipped on ice, causing him to fall backward and hit his head on the concrete steps. The employee sustained head, neck, and upper back bruising.",1
A U.S. Marshal was conducting a fugitive investigation. The team announced their presence and entered the suspect's home. The team was fired upon and the employee was shot in the leg.,1
"An employee was climbing up a truck step in order to enter the vehicle when their foot slipped on the icy step and their hand slipped from the icy hand hold. The employee fell, resulting in four fractured ribs.",1
"On February 5, 2022, an employee was staging metal plates on a ship. A crane was lowering a 96 inch by 24 inch steel plate into the ship's ballast tank area when the employee was pinched between the suspended load and the structural components of the ballast tank. The employee sustained multiple rib fractures, a punctured lung, and lacerated liver and spleen.",1
"An employee was riding in the passenger seat of an industrial cart when their right foot struck a post, resulting in a broken right leg.",1
"An employee was walking across the parking lot to a tractor when he slipped on a patch of ice and fell, resulting in a left hip fracture.",1
"An employee was stepping out of his van when one of his cleats got stuck on the running boards, causing him to fall forward to the ground and sustain injuries to his head and foot.",1
An employee was working in a warehouse when their foot was pinned between a forklift and a rack support system.,1
"An employee was walking down the stairs when she fell onto her right knee, resulting in an injury that required hospitalization.",1
An employee was delivering mail when they tripped on raised concrete in a driveway and fell. The employee suffered a hip injury.,1
"On February 5, 2022, at 11:45 p.m., an employee was cleaning ice from his vehicle in the parking lot. The employee slipped and fell on ice between two vehicles, resulting in a fractured hip that required hospitalization.",1
"On February 5, 2022, at 12:00 a.m., an employee was attempting to unclog a screw motor when the bolts to the frame holding the screw motor broke, causing the frame to tilt over and strike the employee on the left upper leg. The employee suffered contusions on the right upper leg and a broken left upper leg that required surgery.",1
"An employee was removing snow from an entryway when snow and ice fell from the roof, striking the employee in the head and face area resulting in injury.",1
"An employee was transferring trash from a dumpster into a larger container using a forklift. The employee actuated the lever and the dumpster shifted. The employee's left hand was caught between the dumpster and the forklift, resulting in a partial amputation of their index finger.",0
"On February 6, 2022, at 4:30 p.m., an employee was working on a single-item packing area when she tripped on the corner of a plastic pallet and fell to the floor, resulting in a fractured left hip that required hospitalization and surgery.",1
"An employee was working the register when a customer attacked the employee with a knife. The employee sustained multiple stab wounds, a broken shoulder blade, and a shoulder injury.",1
An employee was assisting maintenance with a jam that occurred in another machine when the machine's blades amputated three of the employee's fingers.,0
"An employee was troubleshooting a compressor that had shut down. The employee believed that a 1-inch choke nipple was plugged and drained fluids via the dump line to check the choke nipple. The employee then loosened a union and a flash fire occurred, burning the employee's hands and face.",1
An employee was working in the layer cake department at the second stage icing machine. The employee went to remove a defective cake from the line when her finger was caught in the carousel conveyor and amputated.,1
"An employee was inspecting his vehicle after a trip when he slipped on ice/snow and fell to the pavement, resulting in a concussion.",1
"An employee was applying salt to a store walkway and front porch when they slipped and fell, hitting their head.",1
"An employee and co-workers were working on cutting through roofing material to complete roofing repairs when the employee fell 22.5 feet through decking that had rusted out and landed on metal scale flooring, resulting in a broken femur.",1
"An employee was opening an asphalt mechanical valve with a wrench when the wrench slipped off, causing him to fall backward and strike the ground. The employee suffered a broken wrist.",1
"A maintenance employee was shoveling snow in front of a campus building. The employee sustained a heart attack, requiring hospitalization.",1
"An employee was bending rebar on the second floor when he fell 15 feet to a lower level, resulting in a broken leg and foot. The employee's safety harness was not secure at the time.",1
"On February 7, 2022, an employee was cutting plastic straps off a pallet of cardboard. The employee was pulling on a strap that was stuck when it abruptly came apart, causing the employee to fall on the floor and fracture a wrist. The employee was hospitalized for an adverse reaction to the prescribed medication.",1
"An employee was cutting wood on a table saw when their left middle finger contacted the blade, resulting in an amputation at the first joint.",0
"An employee was climbing onto a rail car when they fell backward and hit their head on a metal ingot, resulting in a laceration.",1
"On February 7, 2022, at approximately 3:35 PM, an employee was pulling parts off of a shelf and carrying them down a mobile ladder. The employee fell to the ground below, and they were hospitalized with a fractured right ankle. Surgery was required.",1
"An employee was trying to push a motor and blower assembly around a corner. The assembly fell off the rail and cut the employee's left leg, including a tendon. The employee was hospitalized.",1
"An employee slipped and fell on ice, resulting in a broken leg that required hospitalization.",1
"On February 8, 2022, an employee was fabricating structural steel columns. The employee adjusted the width of a steel saw horse and set it down using a crane. While unwrapping the chain from the crane, the saw horse flipped over and fell on his foot. The employee's foot/toes were crushed.",1
An employee was threading a line of plastic film into a press. The employee sustained trauma to the right forearm.,1
An employee was assisting in rigging up a well servicing rig on a new job site. When the employee completed his task he jumped approximately 36 inches from the deck of the rig to the ground below. The employee sustained a fractured right ankle.,1
An employee was using an extension ladder in a warehouse. The ladder slipped out from under the employee which caused them to fall approximately 6 feet to the floor and sustain a fractured left wrist.,1
"An employee was exiting their car when they slipped on ice and fell, resulting in a broken femur.",1
"On February 7, 2022, an employee was walking across a parking lot to a school bus when they slipped on ice and fell backward. The employee was hospitalized with a head injury.",1
"An employee was cutting aluminum parts with a saw when a saw chip fell in his shoe and embedded into his skin, resulting in a sore that became infected and that required hospitalization.",1
While arriving for work an employee slipped on ice in the parking lot and hit his head on the concrete. He sustained a brain contusion and a laceration to his head.,1
"At about 7:15 a.m. on February 7, 2022, an employee slipped on an ice patch on a loading dock and fell while putting down salt. The employee suffered a broken hip.",1
"An employee was exiting a building when they slipped on ice and fell to the ground, resulting in a knee injury.",1
"An employee was inspecting an autoclave when steam released and impacted their torso, resulting in burns to their torso that required hospitalization.",1
"On February 7, 2022, an employee fell 52.2 inches off the top of a vehicle engine to the concrete floor while repairing a rough terrain forklift. The engine cover had been removed and the employee was standing on the top of the engine to reach and remove a pin from a lift boom cylinder. The employee suffered a fractured left hip that required hospitalization.",1
"An employee was receiving a product from a vendor when he slipped on ice and fell, hitting his head on the floor.",1
An employee was using a manual hydraulic press to put pressure on the floor of a boat to be able to screw it down firmly. The employee's hand slipped and their left index finger was caught in the hydraulic press. The fingertip was crushed and amputated.,0
"On February 7, 2022, an employee moved an empty, sealed 55-gallon steel drum next to the work bench, put on safety glasses and leather gloves, and began cutting the drum with an angle grinder. The cutting work ignited ethanol vapors in the empty drum, resulting in a blow back incident that knocked the employee down. The employee suffered a broken arm that required hospitalization.",1
"An employee was setting down a 952-pound, 20-foot steel beam on a shot blast conveyor using a 5-ton overhead crane. After the employee released the rigging from the steel beam, they turned and began relocating the overhead crane via pendant control. The rigging caught the top flange of the beam, tipping the beam onto the employee and resulting in fractures to the right fibula and tibia.",1
An employee suffered a fingertip amputation while working on a machine.,1
"An employee fell off a ladder and broke his shoulder, requiring hospitalization and surgery.",1
"An employee was setting up a metal stamping press. While removing the old mold, he lost balance and fell. He stuck his arm out to break the fall and his elbow hit the tool rail. The employee sustained a fractured right elbow, requiring hospitalization and surgery.",1
"An employee slipped on ice on her way to her car and fell, resulting in a broken ankle.",1
"On February 7, 2022, an employee was closing the roll-door to a box truck when his right little finger got caught between the door panels, resulting in amputation of the fingertip.",0
"An employee was standing in the receiving dock area when a forklift backed up over their foot. The employee sustained a fractured ankle, requiring hospitalization and surgery.",1
"An employee was walking to work when they slipped on ice on a sidewalk and fell, resulting in a broken ankle.",1
"An employee tripped and fell, hitting his head on a refrigerator and suffered a possible concussion.",1
An employee was walking on a flat commercial roof to investigate where to install new electrical conduit. The employee slipped on ice. His foot was caught in the roofing tile as he fell. The employee was hospitalized with lower leg fractures.,1
"An employee was cutting a piece of metal with a handheld grinder. The grinder caught, kicked back, and lacerated the employee's left thigh.",1
"An employee was putting a 4-inch by 8-inch sheet of acrylic through a wide belt sander. The sheet got pinched between the sanding belt and the feeder, which caused it to kick back and strike the employee. The employee sustained a laceration to the forehead and upper body pain.",1
"On February 7, 2022, two forklifts were being used to lift a 2,000 lbs. forklift battery when the battery fell onto an employee's right foot. The employee was hospitalized with a fractured foot.",1
"An employee was disconnecting the discharge line of a 4-inch mobile water pump. The discharge line was blocked with ice and the running pump was deadheaded, which built up heat and pressure in the discharge line after the check valve. The pump was shut down, and when the employee opened the camlock of the discharge hose, they were doused with hot water and steam, resulting in burns to their arms and upper torso.",1
"An employee was loading his truck using a forklift. The employee exited the forklift and it rolled over his left foot, resulting in amputations of his toes.",1
"An employee was working on a part in the test facility when they made contact with an energized part; 7620 volts of electricity entered their body in the stomach area and exited through their hand, resulting in electrical burns. The employee was hospitalized.",1
An employee was attempting to interrupt a shoplifting incident when they were stabbed.,1
"An employee was raising a loading chute using a cable winch. There was still a bolt holding the chute in place. When the employee let go of the cable winch, the handle whiplashed and slapped the back of his left hand, resulting in a hand fracture.",1
An employee was counting corner beads in a warehouse when he was struck by a forklift travelling in reverse. The employee was hospitalized with left foot trauma.,1
"An employee was helping to demolish a steel support frame for a sand conveyor. The four legs of the support frame were cut just above the concrete base with a welding torch. Once the legs were cut free, the injured employee and two other employees pushed the frame in the direction they wanted it to fall. As the frame was tipping, the injured employee was struck and was thrown up by the frame. The injured employee then landed on the sand ground or a metal object. The employee sustained a fractured hip, requiring hospitalization and surgery.",1
"An employee was walking in the parking lot when they slipped on ice and fell, fracturing their lower right leg. The employee was hospitalized for surgery.",1
"A service technician was repairing a natural gas regulator that was leaking. When the water heater valve was opened, natural gas ignited, and the technician sustained burns to the arms.",1
"An employee was using a step stool to pick an order when they fell off the stool to the ground, resulting in a fractured left wrist and leg.",1
"An employee was backing up his truck to an empty trailer. He then stopped, exited the cab, and walked toward the back of the trailer for inspection. On the way back to the cab, he slipped and fell on ice and snow. The employee sustained broken bones in the left foot and a dislocated left ankle, requiring hospitalization and surgery.",1
"An employee was standing on the deck of a 4-foot float trailer helping a crew member remove pins to swing the jib on a crane. The employee fell off the float trailer and struck the ground below, resulting in a compound fracture to their left ankle.",1
"An employee slipped off an attached ladder and fell to the ground, suffering a broken arm.",1
An employee was using a 4-foot step ladder to install ceiling drywall. The employee fell and struck their back on a bathtub and was hospitalized with three fractured vertebrae.,1
An employee went to stack cases on a dolly. He proceeded to exit the truck walking backward. The truck's lift gate had not been lifted; the employee stepped off the back of the truck and fell to the ground and the stack of product fell on him. The employee sustained a fractured T-12 vertebra.,1
"An employee was using a liftgate to unload two large forklift tires from a pickup truck. While the employee was lowering one tire with the liftgate, the second tire rolled and struck him. The employee sustained a broken pelvis.",1
"An employee was using a standup forklift to stack pallets. The employee reversed the forklift, rotated and accelerated, when he fell out of the forklift and his right leg was pinned between a guardrail and the forklift, resulting in a broken leg.",1
"An employee was melting butter when the pan caught fire, resulting in a burn to the employee's left hand.",1
"On February 8, 2022, an employee was cleaning a classroom at an elementary school when she encountered a feral cat. The cat bit the employee's right hand. The employee was hospitalized the following morning because of an infection or an allergic reaction to the treatment provided at the clinic the day before.",1
"An employee was stepping from a truck to a flatbed trailer. The employee fell off the side of the flatbed trailer, striking his head on the ground. The employee sustained a head injury.",1
An employee was operating a steel press when the die came down on their right hand resulting in amputation of their middle fingertip and amputation of the ring finger at the second knuckle.,0
"An employee was walking down the hallway when she slipped in a puddle of water and fell to the floor, resulting in a broken leg.",1
An employee was torch cutting when their clothing caught fire. The employee was hospitalized with burns to the left side of their abdomen.,1
"An employee was exiting their vehicle at a construction site when they slipped on ice and fell, resulting in three breaks to their leg.",1
An employee was preparing 1000-pound tank for painting. When a valve was removed it released propane into the shop environment where ignition sources started a fire that burned down the shop. The employee sustained burns to their hands and face.,1
"An employee was operating a bandsaw when coolant began to drip down the side of the bandsaw. The employee attempted to wipe the coolant, when their middle finger contacted the saw blade, resulting in a fingertip amputation.",0
"The injured employee was clearing excess plastic from the conveyor mat of a stretch hood pallet wrapping machine. When the conveyor started, the injured employee's left leg was struck by rotating parts resulting in a left foot laceration.",1
"On February 8, 2022, at 9:20 a.m., an employee was slicing chicken utilizing a slicer. She went to remove a small piece of chicken breast that was lodged between the blade and the slicer tray when the blade contacted her left index fingertip, resulting in amputation.",0
"An employee was helping a customer exchange a propane tank in the parking lot when they slipped on ice and fell to the ground, resulting in a broken ankle.",1
"An employee's chair collapsed during a meeting, causing him to fall to the floor and hit his head. The employee was hospitalized with a skull fracture and a left hip injury.",1
"An employee was removing the cover of a manhole when he slipped into the manhole and fell approximately 15 feet to the bottom of the hole, resulting in cracked ribs on his right side.",1
"An employee was walking to deliver keys to body shop workers in the parking lot when they slipped on ice and fell to the ground. The employee was hospitalized with a broken tibia, fibula, and ankle.",1
"On February 8, 2022, an employee was clearing a jam on a machine belt. When the equipment began running their finger was partially amputated.",1
"An employee was walking when their foot got caught on the carpet and they fell to the ground, resulting in a broken hip.",1
"An employee was in a cage hoisted by a forklift, taking juice samples on top of a tanker truck. When she got off the tanker, the cage got caught on the metal on top of the tanker. The cage loosened and the employee fell to the ground with the cage. The employee sustained a broken left jaw, broken collarbone, broken left arm, broken wrists, and a right eye injury.",1
"An employee was working on an energized meter stack. His wrench contacted the A-phase, causing a small arc flash. The employee sustained second and third degree burns to his face and upper torso.",1
"An employee was using a circular saw to cut a two-by-four piece of lumber when the saw kicked out of the kerf and struck the employee's left index finger, resulting in a laceration and subsequent medical amputation at the second knuckle.",1
"An employee was operating the lift gate on his truck to stow it away, when he slipped on ice/water, catching his left thumb on the lift gate. His thumb tip was amputated directly beneath the fingernail.",0
"A maintenance employee was adjusting a tube filling machine. The machine actuated while their right index finger was in contact with the tube holder fixture, resulting in a fingertip amputation.",0
"An employee was asked to help perform maintenance on a die cast machine. The employee entered the work area, got into a kneeling position, and began using an open-end wrench to remove a hydraulic hose so a fitting could be repaired. When the hose came free from the fixture, residual hydraulic pressure released and hydraulic fluid struck the employee in the chest. The employee fell backward and struck his head on surrounding machinery. The employee was hospitalized with a subdural hematoma, fractures to the forehead, orbital area, and ribs, and required stitches for a forehead laceration.",1
"An employee was exiting a crane cab when the crane step detached, causing the employee to fall to the ground. The employee sustained broken ribs and a punctured/collapsed lung.",1
"An employee's right ring finger was crushed in a closing truck tailgate, resulting in an amputation at the first knuckle.",0
"An employee was attempting to adjust the weights on a production line when her right index finger got stuck between two moving parts, resulting in a fingertip amputation. The machine was in operation at the time.",0
"Employee 1 was running product out of a machine in order to clear the machine for cleaning while Employee 2 was grabbing the product out of the machine. The main fan was not engaged while the employee was running material through the machine. Therefore, the machine began shooting fiber into the air and visibility became very poor. Employee 2's right hand contacted the rotating mechanical part (smash roller) and his right index and middle fingers were amputated. The smash roller spins at 1500-1800 RPMs.",0
"An employee was leaving a client's home when they tripped going down the stairs and struck their face on a handrail, resulting in an injury.",1
"An employee's finger was crushed between two steel bars on the roll line, resulting in an amputation to the distal phalanx of their left middle finger.",1
"On February 9, 2022, an employee was taking a wheel off a vehicle when his left ring finger was caught in the brake caliper, resulting in a partial amputation.",0
An employee was removing debris from the ground when they stood up and sustained a hernia.,1
An employee was repairing a sod-cutting machine. The machine's blade broke the employee's right wrist and lacerated their right arm.,1
An employee was on a semi-trailer helping load fiberglass street light poles. The employee fell off the semi-trailer's flatbed when a 35' street light pole weighing approximately 50 lbs. came loose and fell toward the employee. The employee sustained multiple fractures to his pelvis and ribs and was hospitalized.,1
An employee was pulling mule tape through a duct using a cable take-up reel on the back of a lineman's truck. The employee's left hand was caught and crushed in the cable reel. The employee was hospitalized.,1
"An employee was cutting a piece of aluminum with a chop saw when the saw slipped and cut their left index finger, resulting in a fingertip amputation.",0
An employee had been operating a sandblaster. The employee was tapping a sifting screen to unclog the blast hose when the blade struck their left middle finger resulting in amputation.,0
"An employee was walking up a staircase when her knee gave out, causing her to fall. The employee lost consciousness and was hospitalized for a bruised liver and right side contusions.",1
"An employee was loading a concrete block onto a trailer when it fell on their right middle finger, resulting in a partial amputation.",0
An employee was turning gears with his foot when his foot became caught. The injury required surgery.,1
"On February 9, 2022, an employee attempted to clear a jam in a trim press when the cutter chute contacted the employee's left middle finger, resulting in a fingertip amputation.",1
"An employee was working on a lift to clean a silo and resolve a suction issue. The employee opened the top of the silo to clean out the filter using compressed air. The vacuum for the pump at the bottom of the silo was activated; the employee felt suction on the palm of his left hand. As he tried to move his hand away, his left index finger contacted the blower fan at the top of the silo lid. The employee sustained a partial amputation to his left index fingertip.",1
"An employee was starting equipment with rollers that normally rotated in a outward motion to move stock away from the rollers, but had become a pinch point after maintenance. When the employee reached for stock, their left middle, ring, and little fingers got caught in the pinch point, resulting in amputations to the first knuckle.",0
An employee was cutting a tenderloin with a meat saw. The saw lacerated two of the employee's fingers.,1
"An employee was planing a 12""x37""x3/4"" piece of maple when the tip of her glove was caught by carbon rollers on the planer, pulling her left middle finger into the planer. The employee suffered a partial finger amputation between the middle and proximal joints.",0
An employee was operating a forklift in reverse when it struck a stationary forklift. The employee's leg hit the forks of the stationary forklift. The employee was taken to the hospital with a broken leg.,1
An employee was struck by a water piping cap and sustained a fracture and contusion to the left arm.,1
"An employee was preparing a well for chemical preservation. The employee attached a 2x6-inch metal nipple and a 2-inch metal elbow to the casing valve. The employee then opened the casing valve to bleed down the casing pressure and stepped back to allow the pressure to bleed off. The employee started to reach down to partially close the valve, but before they could make contact with the valve, the nipple and elbow disconnected from the casing valve and struck the employee on the right leg, resulting in a fractured tibia and fibula.",1
"An employee was walking to their vehicle after work when they slipped on ice in the parking lot and fell, fracturing an ankle.",1
"An employee was descending a step ladder when she fell, resulting in a broken left ankle. Surgery was required to repair the injury.",1
"At about 9:00 a.m. on February 9, 2022, an employee was using a wood router machine when it jumped off the work piece onto his left hand causing a deep laceration.",1
"An employee was welding a saddle onto a beam for wood beam installation. The employee was working on an extension ladder at approximately 12 feet, which was leaning against a steel column. The column's anchor became dislodged, causing the employee to fall to the ground. The employee sustained a broken right radius, which required surgery.",1
An employee was changing out auto parts on stamping racks when a part fell out of the rack. The employee got off the lift she was operating and tried to place the part back on the rack when the part cut her index and middle fingers.,1
An employee was using a knot saw and amputated the tip of their left thumb.,1
"An employee was carrying a bucket of hot water from the boiler to the back to empty it when they tripped and fell, causing the hot water to spill onto the floor. The water contacted the employee, resulting in burns to multiple parts of the body.",1
"On February 9, 2022, an employee was standing behind a tree while it was being cleared out by a skid steer. The employee was struck by a snapping tree and their left leg was broken in two places.",1
"An employee was trimming the snout of a beef carcass with a butcher knife when the tendon that was securing the carcass to the holding area snapped, causing the carcass to fall and land on top of employee. The employee suffered a broken bone in the neck.",1
"An employee was hand-feeding paper into the rollers of an embosser machine when a reset button was engaged, raising the anilox roller. The employee's right wrist was caught between the applicator roller and the anilox roller resulting in a fractured wrist.",1
"On February 9, 2022, an employee was 10 feet up an extension ladder while performing an inspection when the ladder slipped down and he fell to the ground, landing on the left side of his body. The employee suffered a bruised hip and an injury on his left elbow that required three stitches.",1
"An employee was sweeping a warehouse floor and picking up trash when he tripped on a board and fell to the floor, resulting in a broken hip.",1
An employee was passing through the loading dock area when they were struck by a forklift that was reversing out of a trailer. The forklift then went forward while the employee was underneath it. The employee suffered a laceration on their right leg.,1
"An employee was climbing a ladder that had been placed against overhead wires. The wires came loose from their pole, causing the employee and the ladder to fall to the ground. The employee suffered a broken back.",1
"An employee's foot became stuck as he climbed into the cab of a truck. As he tried to release his boot, he slid down to the ground and suffered a sprained/strained right foot.",1
"An employee was on a ladder installing a security camera. The employee fell to the ground about 20 feet below and suffered multiple injuries, including fractures to their back and arms.",1
An employee was picking up parts from a warehouse when he fell down a flight of stairs and struck the concrete floor. The employee was hospitalized with a fractured neck and back.,1
"An employee was operating a line bore machine when a tool above the machine fell and the employee went to catch it. The tool or the machine contacted the employee's left middle finger, resulting in an amputation.",0
"An employee was using a 6-foot platform ladder in a parking lot. The employee fell from the ladder to the ground, suffering a broken arm, broken ribs, and a broken vertebra.",1
An employee was operating a foam electrode cutting machine. He was cleaning away fallen scrap when the machine's blade amputated the tip of his left index finger.,0
"An employee was walking in the office when she fell, causing her face to strike the ground. The employee sustained two tooth injuries.",1
"An employee was walking through an airplane hangar when he slipped on hydraulic fluid and fell to the ground, resulting in a left ankle sprain that required surgery.",1
An employee was walking out of the activity room into the hallway. The employee's right leg twisted and she fell to the floor. The employee sustained fractures to their right femur and tibia.,1
"An employee was sitting in a chair caring for a patient. The employee stood up and then fell to the floor, resulting in a fractured right knee.",1
"An employee was using an overhead crane to load a roll. The employee had the crane's remote in his right hand while lining the hoist strap up with his left hand. The strap tightened and pinched his left index and middle fingers against the roll, amputating both fingertips.",1
"An employee was assembling parts. While lowering one part onto another using a crane, the employee's right little finger became caught between the parts, resulting in an amputation.",0
An employee was feeding a wood chipper when the branch being fed shifted and hit the employee in the face causing a broken nose and cheek.,1
An employee was using a forklift to carry a hopper (holding refuse) to dump. The  employee sustained a hernia while pulling a chain to activate the hopper.,1
"While an employee was stocking merchandise in the shoe department, she turned, slipped, and fell to the floor. She sustained a broken left hip and a cut wrist.",1
"An employee was working from a ladder to replace a crossmember on a racking system when they fell off the ladder to the ground, resulting in right hip and wrist fractures.",1
An employee was removing dough from a machine. The machine discharged the dough and amputated the employee's fingertip.,0
"While loading a vehicle from a loading ramp, an employee slipped on ice and fractured a leg.",1
"An employee was installing metal decking. While transitioning from one tie off point to another, the employee fell 15 feet to the lower landing surface, resulting in a right arm fracture at the elbow.",1
The injured employee was walking back toward a plating line when he was struck by a reversing forklift. The employee sustained a fractured pelvis and ankle.,1
"An employee was preparing to do some work on one of the studs next to the stairwell on the second floor. Sheetrock was leaning against the studs the employee was working next to, and during the work, the sheetrock fell on his leg. The employee sustained a broken right leg and foot.",1
"An employee was operating a machine that manufactures roofing materials when the machine jammed. When the employee attempted to clear the jam, their right hand was caught and the machine crushed their index, middle, and ring fingers.",1
An employee rotated an arbor into position for the next setup of the slitter. The inward movement pinched the employee's left thumb between the arbor and the arbor lock. The employee's left thumb was medically amputated just below the knuckle.,0
"On February 10, 2022, an employee was working in the receiving area of a storeroom. The employee went to open a heavy-duty double door and propped both doors open with a doorstop to prepare to move cardboard bales outside. After the employee opened the second door, the hinges closed on her left index fingertip, resulting in an amputation.",0
"An employee was moving a camel from one pen to another. The employee tripped and fell and the camel sat on him. He suffered broken fingers on the left hand, a broken right hand, a dislocated collarbone, broken ribs, and a collapsed lung.",1
"An employee was removing brownie product debris from an extruder. When the debris was removed, the doors of the extruder closed on his finger and amputated it.",0
"An employee fell in a stairwell, suffering a broken ankle.",1
Four employees were in a vehicle driving down the road when a seven-tier scaffold collapsed on the vehicle. One employee was hospitalized.,1
"An employee was passing out paper clips in the parts department. After she finished, she turned off the light, tripped over a chair, and fell to the floor. The employee sustained a fractured right hip.",1
"An employee was walking out of a construction trailer when she slipped on ice and fell to the ground, resulting in a broken leg. The employee was admitted to the hospital for surgery.",1
An employee was handling metal material and suffered a hernia.,1
"An employee slipped on icy pavement while doing electrical work. The employee fell and suffered compression fractures to two back vertebrae, as well as broken ribs on the right side.",1
"An employee was removing the valve cap from a 300-gallon tote of ammonium hydroxide. The back pressure caused ammonium hydroxide to release toward the employee's face, resulting in caustic chemical burns to their face and neck.",1
"On February 10, 2022, a maintenance employee was attempting to remove a barrel from an injection molding machine when their right middle finger was crushed between the tools the employee was using to remove the part from the machine, resulting in a fingertip amputation.",0
"An employee was using an overhead bridge crane to move steel sheet and plate material from the  floor to a trailer to be shipped. The employee's hand got caught in a chain that was part of the lifting device, resulting in broken ring and middle fingers, as well as a little finger amputation.",1
"An employee's leg was struck by a drilling rig auger, resulting in a fracture.",1
"An employee was using an order selector truck to remove old, discontinued styles, and make room for new product. He fell approximately 15 feet to the floor and was hospitalized with two fractures in his spine, a fractured shoulder blade, and a partially collapsed lung.",1
An employee was changing a tool on a milling machine when the milling machine started and the tool started spinning resulting in amputation of the right ring and pinky fingers.,0
An employee was fabricating with rebar when they were struck in the face and head by the rebar. The employee was hospitalized with lacerations and a broken jaw.,1
An employee was on a roof performing roof sheet demolition. He was preparing a stacked bundle of roof sheets to be taken off the roof when he fell backward off the roof edge onto the concrete 11 feet below. The employee sustained a head injury.,1
"On February 10, 2022, an employee was using a beader machine for altering metal when their fingertips were pulled into the dies and amputated.",0
An employee was working on a machine when his left index fingertip was partially amputated by the machine blade.,0
"At approximately 10:17 AM, on 2/10/2022, an employee was climbing a tree to remove dead wood. The employee fell approximately 20 feet resulting in contusions to the head, neck and shoulders.",1
"An employee was escorting a person onto an escalator. The person who was being supported lost balance on the escalator and fell backward, causing the employee to fall. The employee sustained injuries to their right knee and leg.",1
"An employee and a co-worker picked up a 48-inch steel pipe wrench to size up a saver sub.  While sizing up the wrench, the swivel engaged and the pipe wrench hit the saver sub, causing the wrench to swing around and strike the employee in the left arm and chest area. The employee suffered a lacerated spleen.",1
"An employee was using an overhead hoist to move an empty pallet from the sorting line. The connection to the trolley detached and part of the hoist struck the employee on top of their head, causing a laceration.",1
"An employee was walking toward the back door to throw out a pallet when they tripped over the fork of a charging pallet jack and fell to the floor, resulting in a fractured left hip.",1
An employee was using a handheld can to apply spray foam insulation inside the attic of a house. A spark from an unknown source caused the can to explode. The employee sustained burns to his left arm and hand.,1
"An employee was operating a stamping press when their index finger was crushed, resulting in surgical amputation.",1
An employee was operating a cap and socket machine and amputated their right index finger.,0
"An employee was taking two residents onto the porch at a program facility. Another resident ran past the employee, jumped over the porch railing, and ran down the alley away from the program. The employee attempted to go after the resident by jumping over the railing after him, but she was injured when she landed on the ground. The employee sustained a fractured tibia.",1
An employee had been installing roof materials when they fell 14 feet through a hole in the roof and landed on a lower level. The employee sustained back contusions.,1
"On February 10, 2022, at approximately 12:32 a.m., an employee was on break when they were struck from behind by two loaded dunnage racks being transported by a forklift. The injured employee was dragged about 5 feet resulting in fractures and a laceration to lower left leg. The employee was hospitalized.",1
An employee tripped when she went to step on the curb in the parking lot while on lunch break. The employee fell on the ground and sustained a fractured right hip.,1
"On February 10, 2022, an employee fell while climbing up a set of stairs, resulting in a right leg fracture.",1
"A temporary employee was using a step ladder to wipe of the top of a machine. The employee descended the ladder when he missed the last step and fell to the concrete floor, resulting in a fractured left hip and two broken ribs.",1
Employees were carrying a one-ton bag of debris when one employee's leg was caught between the bag and a rebar. The employee's right tibia was fractured.,1
"A temporary employee was using a hammer to remove loosened coupling bolts from the main shaft coupling in the shaft alley of a submarine. The hammer struck his left middle finger, causing an open fracture to the tuft of the last joint.",1
"An employee was supervising the operation of a down puller machine when his right thumb was caught in the mechanism, resulting in a partial amputation.",0
"On February 11, 2022, a forklift operator raised a 300-gallon tote to start gravity feeding hydraulic oil to a processing unit. The employee then left the lift and the tote slid off the forks, striking the employee's right shoulder causing them to fall to the ground and fracture their left arm.",1
An employee was in the assembly warehouse taking a count of palletized product. Fender backs (raw material used in making finished product) slid off a pallet onto the employee's lower left leg. The employee sustained a fractured fibula and a dislocated ankle.,1
"An employee was performing maintenance on a residential HVAC system. The employee was provided an unlabeled bottle of drain cleaner (sodium hydroxide) which he mistook for a beverage and drank some of it resulting in chemical burns to the mouth, esophagus, stomach, and intestines. The employee was hospitalized.",1
An employee in a warehouse was helping a forklift operator retrieve an item from a rack. The forklift was moving forward and slowly coming to a stop when the employee started to step up onto the forklift to communicate with the operator. The forklift ran over the employee's left foot and the big toe was fractured.,1
An employee was traveling forward in a forklift when it struck a support beam. The employee sustained a fractured femur.,1
An employee was on an extension ladder working on a light fixture. The employee fell onto a concrete floor and sustained a right ankle injury and a cut to the back of the head.,1
"An employee stepped out of their vehicle, slipped on ice, and fell to the ground resulting in a broken leg.",1
"An employee was leaving an apartment building after delivering food when they tripped and fell down a staircase, resulting in a broken ankle.",1
"An employee was changing out waste collection barrels outside the spray booth machine. The employee used a plastic bucket to remove excess flammable liquid mixture from the waste barrel, triggering an electro-static spark. The flammable vapors ignited creating a flash fire. The employee suffered second degree burns to the hands and face.",1
"On February 11, 2022, an employee was using an overhead crane to lift a hopper full of scraps to empty it in a dumpster that measured 40 feet long and 2 feet high. Since the dumpster was not completely full, the hopper did not dump forward, so the employee went inside the dumpster and attempted to rock the hopper. He exited the dumpster and used the overhead crane to turn the hopper to the rear of the dumpster. He then stood on the right side of the dumpster while holding onto the lifting yoke for the hopper with his right hand. While holding the yoke arm for balance, he attempted to tip the bucket by rocking it back and forth. As the bucket dumped scrap metal, his right ring finger got caught between the yoke arm and the yoke stop plate of the hopper, resulting in an amputation of the fingertip without bone loss.",1
"An employee slipped on ice and fell in the parking garage while walking into work, resulting in a fractured ankle. The injury required surgery.",1
"An employee was checking the conveyor system on a production line. The employee stood and backed up when they tripped over a 5-gallon bucket and fell, resulting in a fractured left hip.",1
"An employee had positioned a 12-foot, 144-pound stainless steel round bar on a cantilever arm from the material storage rack. While the employee was pulling the bar into position, it dropped 12 inches off the arm to the ground, crushing two fingers on the employee's right hand. One of the employee's fingers had closed fractures, and the second finger had open fractures, resulting in an amputation at the first knuckle.",0
"An employee was repairing cable TV service at a customer residence. The employee was carrying his ladder back to his service vehicle when he tripped and fell to the ground, resulting in a contusion on his right shin.",1
"An employee was drilling and, while connecting an auger, his finger and glove became caught in the auger, resulting in a fingertip amputation.",1
"An employee was using a suction hose to load milk from a farm to a trailer. Suction pulled the valve cover closed, catching and amputating the employee's fingertip.",0
"An employee was removing spiderwebs at a residence. A dog from next door jumped on the employee, biting the employee multiple times.",1
"An employee was working in the cutting department, spreading material and then cutting each ply. The rotary blade of an end cutter amputated the employee's fingertip.",0
An employee was discussing a laser cutting machine issue when he tripped on the edge of an anti-fatigue mat and fell the ground. The employee was hospitalized for a broken hip.,1
An employee was walking in from the parking lot when she slipped on ice and fell on the blacktop. The employee sustained a fractured right ankle.,1
"An employee was releasing a company trailer from the company truck by pulling on the fifth wheel release bar when the bar slipped from the release lever, causing the employee to fall backward. The employee suffered a broken femur.",1
"A maintenance employee was troubleshooting a machine. A chain drive appeared to be stuck. When the chain freed itself, the employee's right ring and middle fingers got caught in the chain. The middle finger was crushed/fractured and the ring finger was amputated at the second knuckle.",0
"An employee was re-spooling cable on a winch. At the operator console, the employee engaged the winch and set the swing line speed as slow as possible. Then he walked onto the dredge deck to guide the cable. The employee's right hand became trapped between the cable and the drum of the winch resulting in amputation of the end joint of the right little finger. The injury required a further medical amputation.",0
"An employee was jacking up a trailer when his left hand became pinched between the jack stand and the trailer, resulting in a fractured left thumb and stitches in their left hand.",1
"An employee was shooting fasteners to secure a metal deck when an unidentified piece of metal ricocheted and hit them in the right eye, resulting in injury.",1
"An employee had been driving a company-owned vehicle. The employee exited the vehicle, and was returning a clipboard to the cab of the vehicle when they fell to the ground with pain in the left leg. The employee's hip has been dislocated.",1
"On February 11, 2022, an employee was cleaning the floor in the meat cutting room, slipped on the wet floor and hit his head on the ground. The employee sustained bleeding in the brain.",1
"A temporary employee was using a brake press machine. The machine crushed his right forearm, resulting in an amputation.",0
"Two employees were in a manhole, installing rebars as part of the rebuilding of a concrete electrical box. An electrical feeder cable popped out of the shoring wall. One employee suffered burns to his face and was hospitalized.",1
"An employee was walking back from lunch break when he tripped and fell in the parking lot. He sustained injuries to his head and face. He sustained fractures to the face and nose, and had bleeding on the brain.",1
An employee was on a ladder inside a house attaching strapping to the exterior door frame. The employee stepped on a guard rail and the rail came loose causing the employee to fall 11 feet from the ladder out of the opening and land in a frozen snow bank. The employee struck his head on the frozen ground and suffered head trauma and fractured vertebrae.,1
"On February 11, 2022, an employee slipped/tripped and fell in the cafeteria. The employee sustained a fractured hip, requiring hospitalization and surgery.",1
"An employee had been seated in a rolling chair on the left side of a greeter's desk, greeting patients, checking them in for appointments, and using a desktop computer. The employee tripped over computer cables under the desk and fell on her right side, suffering a broken hip.",1
"An employee was helping with maintenance on a waste conveyor belt in a sawmill. The conveyor started unexpectedly; the employee lost their footing and their hand contacted a pulley, which caused the amputation of the employee's left ring fingertip. The pulley was unguarded at the time.",0
An employee was installing an air conditioning unit in the attic of a residential home. The employee fell backward down the stairway and broke four ribs on their right side.,1
An employee was operating a stand-up forklift inside a trailer. The employee reversed the forklift and struck another parked forklift. Their left leg was caught between the two forklifts and all five toes on their left foot were fractured.,1
"An employee was walking when she tripped over a flat cart and fell, resulting in a broken arm.",1
An employee was loading a machine part into a CNC machine when their thumb got caught between the chuck jaw and the part resulting in partial amputation of the thumb.,1
"An employee was removing flooring on the second floor of a house. The employee removed the plywood cover and fell through the floor the ground, suffering broken bones. The employee was hospitalized.",1
An employee was using a vertical foam saw to cut foam material. The employee was applying pressure to the right side of the material while pushing it through the blade when the saw blade amputated her right middle fingertip.,0
"An employee was working in the dish room area. A bottle of alkaline oven cleaner fell and broke, getting liquid on the employee. The employee suffered burns requiring skin grafting.",1
"An employee was fabricating a cage out of steel stock and angle iron. The employee was moving a piece of flat stock to get to a specific piece of angle iron from within a pile of steel. He hooked a choked sling onto one side of the flat stock and lifted it a few feet off the ground with an overhead crane. He then bent down and began pulling the angle iron he needed. The elevated flat stock slipped out of the sling and fell, contacting his head and landing on both of his hands. The employee sustained a fractured left knuckle, severe swelling in the right hand, and a half-inch laceration on the right side of the head.",1
A fuel truck driver was preparing to fuel some equipment and was standing behind his parked truck. A utility terrain vehicle ran into the employee and pinned him against the truck's back bumper. His left knee and left leg were injured.,1
An employee was operating a grinder when its wheel lacerated the employee's left forearm.,1
"A front-end loader had been flipped over upright, and employees were getting ready to unload its bucket. When pressure on the hydraulic lines was released, the bucket lowered quickly and crushed an employee who had walked beneath it. The employee suffered three broken upper-back vertebrae and a punctured lung.",1
An employee had been trimming plants at a nursery and experienced chest pains. The employee was hospitalized with severe dehydration.,1
"An employee was in the back room using a ladder to retrieve merchandise from a rack when she fell. The employee tried to catch herself on the rack, but the ring on her ring finger became caught on a shelf, resulting in amputation of the finger.",0
An employee was handling a K-loader when their finger got caught between the rails of the K-loader and the fingertip was amputated.,0
"An employee tripped and fell to the floor, suffering a broken left hip.",1
"A temporary employee was working on a shredder machine when a piece of material got stuck in the bottom of the belt on the machine. She was trying to retrieve the stuck material when the material grabbed her hand and it pulled it into the machine. Her finger wrapped around the material, and the machine amputated an inch of her left middle finger.",0
An employee was pushing down on a gate to close it when their legs buckled and they collapsed. The employee sustained ruptured leg muscles.,1
A mechanic was tracking a new belt onto one of the conveyors on a ravioli processing machine. His left arm was pulled into a pinch point between two conveyor belts. He suffered a laceration to the arm and was hospitalized.,1
"An employee tripped on a cable and fell to the floor, suffering a broken hip.",1
"An employee was walking up a sloped driveway of a customer's residence. The employee slipped on ice that was covered by snow, fell on the concrete driveway, and sustained a fractured right hip. The employee was hospitalized.",1
"An employee was running a lathe. While adjusting the stop feed between the bed of the lathe, the lathe actuated, pinching his finger and resulting in an amputation.",0
An employee was using a remote-operated overhead crane to pick up a stamping die. The crane cables caught the cleat of a die as the employee was moving the crane to pick up another die. The die fell and crushed the employee's right foot.,1
"An employee was walking down the steps of the employee entrance when he fell, resulting in a laceration to the back of his head.",1
"An employee slipped on ice while walking down an exterior aisle with a row of storage units. She fell, landing on her back and hitting her head. She suffered a concussion and was hospitalized.",1
"An employee was cleaning their work area when their middle finger contacted an open floral cutter, resulting in a fingertip amputation.",0
"An employee was carrying a bucket of nitric acid when it hit a railing. Nitric acid splashed onto the employee's face and into the employee's mouth, causing a chemical burn.",1
An employee was vacuuming heavy metals in the attic of a building when he fell through a sheet rock ceiling and landed on the floor approximately 30 feet below. The employee was hospitalized with lower back injuries.,1
An employee was entering through a designated associate entrance when the door slammed shut due to a forceful wind and amputated his right ring finger.,1
An employee tripped in a hallway and fell to the tile floor. She suffered a fracture to the right humerus.,1
An employee had been checking a customer out at the register. The employee and the customer got into a verbal confrontation that became a physical altercation. The customer fell on the employee's left ankle and broke it.,1
"On February 14, 2022, an employee was using an upright pallet jack to pick products in a warehouse. While making a left turn, the pallet jack struck a pallet full of products, causing his right ankle to become caught between the pallet jack and the pallet. The employee was hospitalized with a broken right ankle.",1
"An employee was using a disc sander to clean burrs off a small piece of aluminum. The machine grabbed the aluminum and pulled in his fingers, causing amputations to the left index and middle fingertips as well as a broken ring finger.",0
An employee was cutting a 1-by-6 board on a table saw. The saw amputated his left index finger at the knuckle.,1
An employee was tightening a clamp on a polish rod for an oil well. A bottom clamp slipped and caught his right index finger against the carrier on the bridle of the pump jack. The right index finger was amputated near the middle joint.,1
An employee exited a freight elevator in the docking area and was walking across the dock when he fell off of the dock and landed on the concrete ground breaking his right femur and ankle.,1
"An employee was kicking ice from the forks of a forklift. He lost his balance and fell to the concrete floor, suffering back fractures.",1
An employee was greasing printer gears on an energized printer when the gears caught his glove and pulled in his right index finger. The fingertip was amputated.,0
"An employee was struck by a forklift, suffering an injury to the right foot. The employee was hospitalized.",1
A dump truck full of wood was being emptied when a log rolled and crushed an employee's foot. The employee suffered a broken toe.,1
"An employee was tightening wire on a bobbin. The employee was holding a strand while tightening the tension on the reel, and his left index finger was caught between the strand and the reel, resulting in a fingertip amputation.",0
An employee was using a drill press to drill holes in a door sweep when her gloved left hand was pulled into the drill bit. The employee's left index finger was medically amputated.,0
"An employee was walking around a log conveyor when he slipped and fell. During his fall, his right hand entered an ingoing nip point where a chain passed over a sprocket. The rotating parts amputated four of his fingers.",0
An employee was installing a stick cylinder that was hoisted by a 5-ton care into the boom arm of an excavator. The eye end of the stick was being installed on the bracket of the boom arm. The employee was on the floor installing the pin when the crane started to lift and tilt the boom arm toward the employee. The employee struck a utility cart while moving out of the way and the boom arm fell on and fractured both of the employee's lower legs.,1
"During a workplace altercation, one employee cut another employee with a knife. The injured employee was hospitalized.",1
"An employee was aligning a lift table and base when his left thumb was caught between the alignment hole and the base, resulting in a thumb tip amputation.",0
"An employee was attempting to replace fluorescent lights with LED lights when he received an electrical shock, resulting in a burn to his hand.",1
"While in the parking lot, an employee turned around and started to walk away then tripped as she was stepping onto the sidewalk and fell forward.",1
"An employee was climbing a ladder while carrying a garage door track when he fell 6 feet to the floor below, resulting in broken bones in his back.",1
An employee was disconnecting a steam condensate hose from a rail tank car when residual steam condensate splashed onto his upper legs. The employee was hospitalized for burns.,1
An employee was guiding a crane operator while shipping containers were being stacked. The employee's left hand was caught and broken between two containers as one was loaded onto the other.,1
"An employee was unloading a pumping unit with a winch truck. The winch cable bounced, striking the employee in the head. The employee lost consciousness and was hospitalized.",1
"On February 14, 2022, a truss assembly employee was laying out wood truss members when he noticed two trusses beginning to double-feed on the outfeed roller table for stacker no. 3. The employee went to the outside roller table, stepped between live/running rollers, and lifted the tail of truss #1 to hold it back and prevent it from feeding onto truss #2. At approximately 10:15 p.m., while holding back truss #1, an oncoming truss (truss #3) struck the employee in the back of the left thigh, resulting in an avulsion injury that required hospitalization.",1
"On February 14, 2022, an employee was working with a partially-powered pallet jack when his fingertip was amputated.",0
"On February 14, 2022, an employee was clocking out for break by swiping her employee badge on a time clock scanner. She was holding the door to the break room open with her right hand and reaching with her left hand to scan the badge. The door closed on her right ring fingertip and amputated it.",0
An employee was driving a utility vehicle. His pant leg slipped over the brakes and he hit a bump in the road causing his foot to slip off and hit the gas. The vehicle then jumped the curb and struck a light pole. The employee hit his head on the mirror of the vehicle and sustained a head injury.,1
"An employee was loading concrete bags onto pallets when they tripped on a gap between the pallets and fell to the ground, resulting in a broken left leg.",1
"An employee was conducting an inspection of a residential roofing system. The employee climbed up the ladder and reached the roof's landing surface when the ladder broke and the employee fell to the ground, resulting in fractured ribs, a lower back injury, and an injury to the right elbow that required surgery.",1
"An employee was unloading an electric pallet jack from a truck. After they moved the pallet jack to the edge of the lift gate to wait for a forklift, they fell with the pallet jack to the ground. The employee was hospitalized with a broken neck and spinal injuries.",1
"On February 14, 2022, an employee was putting his tools away at the end of the day when he slipped on sealant that had dripped from the overhead duct onto the floor. The employee fell to the floor, resulting in a left femur fracture.",1
"A concrete pump truck hose blew at its connection, struck an employee, and knocked him to the ground 6 feet below. He suffered a shoulder injury and was hospitalized.",1
"An employee was removing a container containing a body from a hospital morgue when the container became dislodged from the rails and struck the employee, resulting in a fractured left fibula and tibia.",1
"An employee was opening the door to an apartment when a gust of wind blew the door closed on his left hand, amputating part of the index fingertip.",0
"The injured employee was using a crowbar to remove shims from beneath a 9,000-pound plate. The crowbar kicked out causing the plate to shift back on the shims. The employee's hand was caught between an aluminum shim and the table and their little fingertip was amputated below the nailbed.",0
An employee was walking toward the docking station main office to pick up a work order for items to be shipped when they slipped on ice and fell. The employee sustained a broken right hip/femur.,1
An employee was loading a liner sheet into a rotovac machine. The employee's arms came in contact with the two hand controls. This caused the machine frame's clamps to close onto the employee's hands. The employee suffered third-degree burns and lacerations to both hands. The employee was hospitalized.,1
Two employees were trying to retrieve a section of channel on the bottom of a stack of four. One placed a hook into the third piece of the stack and lifted the sections up while the other placed a block under the lifted sections. This second employee's left hand was still sitting on the block when the three sections of channel slipped off the hook and crushed the employee's fingers.,1
"An employee was working underneath a creel calender machine, using a tool to straighten/comb wires as they enter the creel. The employee's tool contacted a pressure roller and was pulled into a pinch point along with the employee's right hand resulting in amputations to the right thumb tip, and two other fingertips.",0
"An employee was unloading a push-around lift from a tilt trailer when the tilt trailer tipped over, hitting his right arm and leg and resulting in damage to the muscles and tendons.",1
"An employee was standing on a step stool hanging merchandise in the accessory department. While stepping down from the stool, the employee fell and hit her head on a fixture. The employee sustained a cut on the back of her head, which required stitches.",1
"An employee was climbing a ladder to access a single-story roof to investigate a leak. As the employee approached the top of the 12-foot climb, the ladder base kicked outward and the employee fell to the ground, landing on his feet. The employee was hospitalized with a broken right tibia.",1
An employee had been working with a saw. At the end of his shift he unplugged the saw and his glove got caught in the rotating blade. The employee sustained a laceration to his hand and thumb.,1
"An employee was cleaning windows. He was stepping down from a higher level when he fell to the ground, resulting in a broken hip.",1
An employee was walking to the rear door to pick up a delivery when he tripped over shrink wrap that was left on the floor. The employee fell and fractured his left arm.,1
"While driving a forklift, an employee sneezed and pushed the gas instead of the brakes and the forklift struck a pole. The employee sustained a head and neck injury.",1
An employee was cutting a length of PVC pipe with a gas-powered saw. The saw blade failed causing the saw to kick back and hit the operator in the chest. The employee sustained a 2-by-6 inch long cut to his chest requiring hospitalization to repair tendons.,1
"On February 15, 2022, at approximately 3:20 PM, an employee was climbing a tree to perform utility line clearing work. The main stem (trunk) of the tree broke and the employee fell approximately 15 feet to the ground. The employee was hospitalized with compression fractures to their L1 and L2 vertebrae.",1
"An employee was rounding the front of a cash register area when his left foot caught the power cord of a beverage cooler. He fell, caught himself with his hands, and suffered broken vertebrae in his neck.",1
"An employee was removing an elevator bell when the winch line caught slack, causing the bell to fall and crush the employee's right hand. The employee's right ring and middle fingertips were amputated.",1
An employee was standing on a loading dock when he fell to the ground and struck his head on a concrete wall. He was hospitalized for a head injury.,1
"An employee was pulling mule tape through a conduit when the mule tape broke, causing the employee to fall back and strike his head on the asphalt ground. The employee sustained a skull fracture.",1
"Employees had just loaded a transformer onto a heavy haul trailer using a jack and slide system. They were removing a section of rail from the system, with one end of the rail chained to the forks of a forklift. While they were backing out from underneath the transformer, a 15-foot section of rail fell from the forks and hit an employee's leg. He suffered injuries to the calf and fibula.",1
An employee was operating a punch press. The employee's thumbs got caught in the point of operation as the machine cycled. The left thumb was crushed and the right thumb was partially amputated.,0
"On February 15, 2022, an employee was feeding lumber into a table saw when two of their fingertips were amputated by the saw blade.",0
An employee was using a 4-foot paddle to clean out a hopper that discharges pet-chew product into an extruder. The paddle contacted the extruder's auger and was pulled into the hopper. The employee's finger was cut by a sharp edge on the hopper. He sustained a partial fingertip amputation with an open fracture. The hopper was running at the time.,0
An employee was lifting a patient from a care bed when they sustained a strained abdomen and possible hernia.,1
An employee was walking by a conveyor and began to pull out some trash that was in it. His hand was pulled into the conveyor; he sustained broken bones in his right arm and was hospitalized.,1
"While operating the cutter blade on a blister machine, an employee's right thumb tip was amputated by the blade.",0
"An employee tripped over metal tracks on the floor of a work site. He fell, breaking his hip. He was hospitalized.",1
An employee slipped and fell on ice at a worksite. The employee fell to the ground and suffered a broken ankle.,1
An employee was attempting to retrieve valves that had fallen below the carriage of an eddy current tester. When he retrieved the valve the carriage of the test machine amputated his left little fingertip.,0
An employee was operating a spot welder and holding an anchor in place. The machine cycled and amputated the employee's fingertip.,0
"An employee was helping to move a 1,600-pound piece of steel from the ground to a barge. The steel rotated and hit the employee in the lower right leg, fracturing it. The employee was hospitalized.",1
"On February 15, 2022, an employee was cleaning debris off a customer's roof, which was partly corrugated. The employee fell 16 feet through the corrugated part of the roof to the floor. He was hospitalized with a broken right arm and hip.",1
"An employee was siphoning degreaser from a 55-gallon drum. Some of the caustic solution entered his mouth and throat, causing burns. He was hospitalized.",1
"Two employees were standing inside a tank sand-blasting when sand grit struck one employee's head and face, causing abrasive injuries.",1
"An employee was working on the roof and cutting an angle on a piece of laminated veneer lumber. The saw became stuck, and when the employee attempted to undo the jam, he sustained a laceration between the thumb and wrist on his left hand.",1
"An employee fell on a staircase and broke both wrists, requiring hospitalization and surgery.",1
"An employee was climbing a fixed ladder to bring material up onto a roof. The employee slipped from the ladder and fell about 17 feet, suffering a broken back.",1
"On February 15, 2022, an employee was adjusting storage racks from a scissor lift when the scissor lift battery died. The employee then climbed onto a steel rack and fell approximately 6 feet from the rack to the concrete floor below. The employee sustained fractures to his leg requiring surgery.",1
"An employee was standing at the back of a truck, training a new driver on how to unload it. The employee slipped and fell on ice and snow covered ground, hitting his head on the ground. The employee sustained a concussion.",1
"An employee injured their hand while riding on the back of a garbage truck, resulting in hospitalization.",1
"While deburring some parts on a sanding machine, an employee's gloved finger was pulled into the sanding disc. The employee was hospitalized.",1
An employee was clearing debris from a machine when the machine's arm retracted and amputated the employee's right middle fingertip.,0
"On February 15, 2022, an employee was offloading 5 pieces of 1/2-inch bent plates that had a total weight of 1,225 pounds. The employee was using an overhead crane equipped with a new basket lift sling. Sharp edges on the bent plates cut through the lifting sling causing the plates to fall about 3 feet to the floor. One of the plates fell on the employee's right leg causing a laceration. The employee then developed a hematoma of his lower right leg and was hospitalized.",1
An employee was helping to replace a tilt cylinder on a forklift. A second forklift was being used to lift the forklift that was being repaired. The lifted forklift slipped and pinned the employee's fingers between the cylinder and frame. Four fingers on the employee's right hand were amputated.,1
"An employee removed a product pump face plate to investigate a no flow situation on a pouch machine. The plug supplying electricity to the mixer hopper was physically disconnected before the employee put his hand over the front of the pump and into the feed tube. As hot product was leaking from the pump body, the employee called for assistance to reassemble the pump and stop the leak. The employee then felt a pulling sensation on his finger from the pump, which had amputated the tip of his finger.",1
"An employee was standing on a ladder, having climbed it to change out glass on a broken window above a patio door. The ladder slipped and he fell 8-10 feet to the concrete ground below. He suffered bleeding in the brain, a broken right wrist, a fracture/dislocation to the left elbow, and a broken lower left leg. He was hospitalized.",1
An employee was assisting with jump starting a bus in the parking lot when they slipped on ice on the pavement and broke their left ankle.,1
"A crew was lifting a bridge with bottle jacks so they could remove and replace floor-to-ceiling joists. Soil at one end gave way, causing a wall of lumber to collapse on the foreman who was observing them. The foreman suffered fractured vertebrae.",1
"While adjusting a roller, a cross lapper amputated an employee's right index fingertip.",0
"An employee became dizzy while on an elevated surface, 6-8 feet high. He began to climb down a ladder. The ladder's feet slipped out and the employee fell to the ground, suffering a broken right fibula and tibia.",1
"On 2/16/2022, an employee was working in the warehouse near a dock, had chest pains, and slowly collapsed.",1
"An employee was cutting bone-in pork for stew meat when the blade of the band saw caught his right hand, resulting in amputation of his right index fingertip.",0
An employee was moving a slicer when it lacerated and partially amputated the tip of their right thumb.,0
An employee was manually manipulating a pipe pulling machine when his left middle and ring fingers got caught between the inner post and the strut extension. His left middle and ring fingers were partially amputated.,0
"A pipe crew was working with a service crew to remove a cap from a newly installed 16-inch water main. The cap blew off the pipe under pressure, striking an employee's right leg and breaking it in two places.",1
"An employee was unloading diesel to an above-ground diesel tank. When opening the fuel valve, the employee fell backward onto the ground, resulting in a broken leg.",1
An employee was traveling down a center aisle in a forklift. While making a left-hand turn the forklift struck a bollard. The employee's left foot was crushed between the bollard and equipment.,1
"An employee was operating a thread machine in the bolt department when his apron got caught on a piece of round bar that was being threaded. His hand became entangled with the clothing and he began to spin with the machine. Another operator came and hit the stop button. The employee sustained a left arm fracture, and a laceration to the arm and back of the head.",1
"Employee 1 dismounted her powered industrial truck (PIT) and was standing at a table. Employee 2 began driving away on a different PIT, but lost control of the vehicle. Employee 1 attempted to move out of the way, but fell to the ground. The wheel of employee 2's PIT crushed employee 1's right foot.",1
"An employee was removing a large tree limb that had fallen from another property and was blocking a drive-thru. In the process, the employee fell onto another employee who suffered a fractured tibia.",1
An employee was operating a dryer on a salad line. A portion of the bottom plate inside the dryer fractured and exited the dryer through a maintenance door. That piece of metal impaled the employee's lower left leg.,1
An employee was clearing a jam in a machine. The employee's right thumb became stuck in the machine and the employee suffered a laceration and removal of the nail.,1
A temporary employee was struck by a forklift as it backed up. Both of the employee's feet were broken.,1
"A maintenance technician was replacing a shackle on an evisceration conveyor. His right thumb tip was pinched between the conveyor chain and guide wheel, resulting in amputation without bone loss.",0
"An employee was snowboarding from one building to another for a meeting. The employee caught an edge and fell backwards, landing on hard ice on his back. He suffered a whiplash injury that caused tingling in both arms, weakness in both hands, and nausea.",1
An employee was on the back of a truck with a folding table. A gust of wind pushed the table and caused the employee to fall from the truck to the ground. The employee was hospitalized with a brain bleed.,1
"An employee was climbing a 32-foot ladder to inspect a house's gutter line. The ladder's feet slipped on icy ground, and the ladder slid down the side of the house and came to rest about 10 feet from the ground. The employee fell to the ground and suffered a concussion, along with swelling and bruising of his shoulder and back. He was hospitalized.",1
"An employee was working on a generator. When the employee operated a switch, an explosion or arc flash burned the employee's hands.",1
An employee was entering the cab of a bulldozer when the door caught and crushed their left little finger.,1
"An employee had been on top of an open-top truck, smoothing out wood chips. While climbing down from the chip trailer, the employee fell to the ground and sustained a head injury, broken ribs, and a broken hip.",1
"At about 10:30 a.m. on February 16, 2022, three Fagioli, Inc., employees were offloading a series of 10-ton counterweights from a trailer and setting them on a tray. A crane began to lift one pair of counterweights, but it began to swing back toward another pile of counterweights still on the trailer. An employee's left leg was caught between the two piles of counterweights; the leg muscle was crushed and the employee was hospitalized.",1
"An employee had been driving a dump truck. While brushing debris off the tailgate, the employee's right middle fingertip got caught between the truck bed and the tailgate. The fingertip was amputated.",0
"An employee lost their balance and fell inside a building, suffering a broken kneecap.",1
An employee was cleaning a stairwell landing when he fell down a flight of stairs. He suffered a head injury and a cut below the eye.,1
"On February 16, 2022, an employee was removing a thin sheet of plastic from a production machine when the machine cycled and amputated the employee's index fingertip.",1
"An employee using a computer numerical control (CNC) lathe was loading a piece of ram shaft and was using his left hand to hold the tailstock. When the button was pushed to tighten the tailstock, in began to close, and the employee's left thumb and index finger were crushed between the piece of material and the tailstock. The employee's left index finger was medically amputated.",1
"An employee tripped and fell to the floor in an office. She suffered a broken left femur and was hospitalized, requiring surgery.",1
"An employee was checking stock on a bottom shelf. The employee was leaning on a removable railing, which broke free. The employee fell 8 feet to the ground below and suffered fractures to the left arm, the left elbow, and back vertebrae. The employee was hospitalized.",1
An employee was trying to catch a falling dock plate when it amputated his left thumb.,0
An employee was using a forklift to conduct inventory of lead blocks in a 50-foot by 50-foot warehouse. The employee was overcome by carbon monoxide from the forklift's exhaust and was hospitalized.,1
"An employee slipped on ice in a parking lot, fell to the ground, and suffered a broken femur.",1
"An employee set up a 6-foot A-frame ladder on the lift gate of his truck to install panel doors and a grill on a refrigeration unit, located on the front nose of a semi-trailer. While descending the ladder, the employee lost balance and fell backward, approximately 4 to 5 feet, to the ground.  The employee sustained injuries to their wrist, ribs, and hip.",1
An employee was trying to move a tangled drive chain. The employee's left ring finger got caught in the drive chain when the motor started. The employee required surgery to remove the fingernail and close the wound.,0
"An employee slipped on ice and snow in a parking lot and fell, suffering a broken shoulder.",1
"An employee was working on a face mix filling box that was out of level. The employee was carrying out a live test to identify the problem. As the box moved backward, a magnet bracket caught the employee's shirt and pulled his right arm against the frame of the machine. The arm was broken.",1
"An employee was picking up scrap metal. Metal pieces scissored and pinched the employee's right ring finger, causing a possible fingertip amputation.",1
"On February 17, 2022, a trash collection employee was emptying a dumpster into the rear hopper of the vehicle. His left hand was caught between the dumpster and the edge of the hopper, resulting in an amputation to his left middle finger.",0
"An employee was setting up an extrusion molding machine. The machine caught the employee's glove and pulled it in, then amputated the tips of the employee's right index and middle fingers.",1
An employee slipped and fell on ice and snow in a parking lot. The employee suffered torn quadriceps muscles.,1
An employee was in the basket of a mobile scaffold that was elevated 40 feet. The employee was using an impact driver to install metal braces on steel girders and joist. The scaffold operator attempted to drive around a 4x4 that was positioned on the right side of the bay. The right tire rolled over the 4x4 and the mobile scaffold overturned. The employee struck the concrete floor and sustained broken ribs and bruised lung.,1
"On February 17, 2022, at approximately 9:00 AM, employee 1 was assisting employee 2 with a repair on the bottom rail of a trailer. Employee 1 was holding an L-shaped piece of metal to assist employee 2, who was using a squeeze tool. As employee 2 activated the squeeze tool, employee 1's left hand was pulled into a pinch point on the tool, resulting in amputation of their left ring fingertip.",1
An employee was transferring metal from a re-coiler to a turnstile. The employee's right middle finger was crushed between two coils of steel as he guided one of the coils off the processing line. He suffered an open displaced fracture to the finger.,1
"An employee slipped on ice in a parking lot and fell to the ground, suffering a broken hip and ribs. He was hospitalized.",1
"An employee was assessing a nonfunctioning overhead garage door motor. When he touched the belt to check its tension, it activated and his hand was pulled between the belt and a pulley. The distal tip of the employee's right second digit was amputated at the base of the nailbed.",0
A postal service employee was delivering mail when they were bitten on the back of their lower legs by a dog at the residence. The employee sustained puncture wounds and lacerations.,1
"An employee was stepping from a loading dock into a postal vehicle when the top of her head struck the top of the vehicle. She stepped back, slipped, and fell, hitting her back and head on the loading dock. She suffered broken vertebrae in the lower back.",1
"An employee fell to a concrete floor, hitting his head and suffering a fracture, loss of consciousness, and possible bleeding in the brain.",1
An employee was operating a forklift and struck a support column in a warehouse. The employee hit their head on the steering wheel and was hospitalized with a fractured C6 vertebra.,1
"An employee was working from the basket of a scissor lift, 15 feet above a concrete floor. The scissor lift drove into a trench that had been cut in the floor for installation of utilities and tipped over; the employee fell to the floor and suffered multiple fractures to the left hip.",1
"An employee was struck by a forklift while walking in a warehouse area. The forks ran over the employee, who suffered a broken hip and back contusions.",1
An object fell from a roof and struck an employee's head. The employee was hospitalized with a laceration.,1
"An employee was unloading his truck at a roofing and asphalt plant. His cell phone fell into an unloading pit and as he tried to catch it a moving conveyor belt caught his sweatshirt and pulled his arm and hand in. He suffered two broken bones in the left hand, as well as fractures to both left forearm bones.",1
"An employee slipped on ice while walking through a job site, fell to the ground, and suffered two broken ribs.",1
"An employee was working in the racking area. While walking beside a steel cart, wire flats slid off the cart and struck the employee's lower left leg, resulting in a fracture about 6 inches above his ankle.",1
An employee was operating a pipe bending machine when his finger became pinched in a nip point on the machine. The employee lost his fingernail and his fingertip required reconstruction.,1
"An employee was helping to move a welding machine using a pallet jack. While the welding machine was being lowered into position, it crushed the injured employee's toes, resulting in broken toes and a laceration.",1
An employee was driving a forklift when it overturned. He fell out of the cage and suffered a broken pelvis.,1
"On February 17, 2022, a mail carrier had just delivered mail to a residence. The carrier's right foot slipped, due to rain and ice, and hit a brick flower pot; the carrier then fell and suffered two fractures to the right leg. The carrier was hospitalized, requiring surgery.",1
"An employee was operating a pallet nailer machine. He saw a nail that was not all the way in, moved to drive it in, and was caught by a carriage on the machine as it returned to its home position. He suffered internal organ injuries.",1
"An employee fell from a flatbed truck to the ground, suffering head and rib injuries.",1
An employee was putting a dog in a kennel when it bit the employee on the hand.,1
An employee was cutting a piece of angle. The employee fell to the ground and was injured. The employee was hospitalized.,1
"An employee was working from a scissor lift to install a gas line. An overhead garage door opened and knocked over the lift. The employee's hip and right elbow were broken in the resulting fall, and the employee was hospitalized.",1
"An employee was getting down from a forklift. He lost his balance, fell to the ground, and landed on his back, also hitting the back of his head. He was hospitalized.",1
"At Amherst College, a dining hall employee was hospitalized after falling down 12 steps.",1
An employee was using a nail gun to brace trusses in a one-story residential roof under construction. A truss collapsed and the employee fell from the truss to the ground 10 feet below and suffered a broken right femur.,1
"An employee was sitting on a pallet. A forklift struck the pallet the employee was sitting on and the employee's left leg went under the pallet, resulting in a lower leg injury.",1
An employee was operating a stand-up forklift when it struck a racking system. The employee's hand was injured.,1
An employee was moving a powered pallet jack when their ankle was pinned between the jack and a racking system resulting in a broken ankle and a ruptured Achilles tendon. The employee was hospitalized.,1
"Employees were in a mechanical power press cell, using die blocks to investigate a spot on the die that appeared to be causing flaws to stamped parts. A robot activated the cam slide and an employee's right thumb was caught in the press, causing an amputation to the thumb.",0
"At 2:45 p.m. on February 18, 2022, an employee was driving a standing forklift down an aisle. The forklift struck a shelving unit and came to a sudden stop, which caused the employee to fall out onto the concrete. The employee suffered a broken hip.",1
An employee was washing a vehicle's windows at a gas station. The employee fell and suffered a broken right ankle.,1
"An employee fell from a wet roof (about 8-9 feet high), suffering a left knee dislocation.",1
A crew was laying asphalt on a roadway. A car crashed through the barricades and struck one of the employees before crashing into a construction roller. The employee suffered fractures.,1
An employee was slicing meat using a meat slicer. The blade cut her right little finger and removed flesh.,1
"An employee was bending to throw trash into a dumpster. He twisted his lower back, suffering a bulging disk.",1
"An employee was pressure washing pipes when the fitting on the spray wand broke and the hot water contacted the employee, resulting in burns to his stomach and thighs.",1
"An employee tripped and fell to the floor, suffering a head and back injury. He was hospitalized.",1
An employee was using a horizontal bandsaw and amputated his right thumb.,1
"An employee was walking to get ice from the ice machine to prepare an ice bath. The employee tripped on PVC tubing on the floor that was used to direct the water being drained from the ice bath tub and fell, resulting in a broken hip.",1
"An employee was performing. He fell out of a rotating cage and was struck by another cage, also rotating. He suffered a fractured skull and a laceration to the forehead.",1
"A mail carrier was pushing a hamper down a ramp. The carrier's right thumb was caught between the hamper and the wall, and was amputated at the first joint.",0
"An employee was bringing materials onto a roof from a scissor lift. While stepping out of the lift and onto the roof, he slipped and fell, landing on the concrete floor about 20 feet below. He suffered two broken ribs and a concussion.",1
"An employee was entering a service department from outside. He slipped on ice and landed on his back, also hitting his head.",1
An employee was moving a top sheet in front of the photo eye on a conveyor. The conveyor turned on and pinched the employee's right ring finger. The fingertip was medically amputated.,0
"An employee was working on a roof. The employee stepped on a sheet and fell through to the concrete about 28-30 feet below. Both of his legs and one arm were broken, and he was hospitalized.",1
"An employee was attempting to release a pivoting fifth wheel plate on a frameless dump trailer. The pin would not release, so he asked another employee to put the truck in reverse to relieve pressure on the pin while he used a hammer to gain leverage on the releasing mechanism. The pivoting plate caught his right index finger and amputated it below the second knuckle.",0
"An employee tripped on branches and fell near a curb, resulting in head injuries.",1
An employee was leaving a delivery van when he slipped and fell on icy ground. He suffered a broken hip and was hospitalized.,1
"On February 18, 2022, an employee was climbing an 8-foot extension ladder to the roof of a one-story house. His feet got tangled with a lanyard attached to his harness, causing him to fall about 8 feet to the ground. He suffered a broken leg and was hospitalized.",1
"An employee slipped while walking through a parking lot, landing on the cement and suffering a broken leg.",1
"An employee was standing between a motorized pallet jack and a storage rack. The pallet jack was activated, moved toward him, and caught his foot/ankle against the rack. He suffered an injury to the right ankle.",1
"An employee was delivering drywall sheets in a cart. The cart began to tip; as the employee tried to steady it, drywall fell off it and struck him. He suffered a broken leg.",1
"An employee was performing maintenance on aircraft landing gear when a piston from the landing gear strut released and struck the employee in the chest, resulting in a puncture injury.",1
"An employee was walking along a catwalk while tracking a section of chain when they fell 7.5 feet to the ground below, resulting in a broken rib, punctured lung, broken collarbone, broken wrist, laceration to head, and a brain bleed.",1
"On February 19, 2022, an employee's hand was caught between the turret and the roller of a rewinder. The employee's middle fingertip was amputated up to the knuckle.",1
Employees were taking apart a heat exchanger. The exchanger was active and released 419 pounds of ammonia. One employee suffered burns to the upper body.,1
"An employee was removing parts from a machine to correct a jam when his right hand was pinned between the tracks it used to move paper products. He suffered injuries to the middle finger, the index fingertip, and the thumb.",1
"An employee stepped down off a customer's porch and turned a corner when he slipped on ice and fell on his side, resulting in five broken ribs.",1
A heavy steel weldment fell on and injured an employee's right ankle/foot.,1
An employee was removing snow when he slipped on ice and hit his head. He suffered lacerations and a potential concussion.,1
"An employee slipped and fell on an icy sidewalk, suffering a broken femur. The employee was hospitalized and underwent surgery.",1
"An employee was laying out work in a delineated work zone. A passenger vehicle struck the employee, who suffered multiple broken bones.",1
"Two carts collided in a walk-in freezer, causing an employee's right middle fingertip to be amputated.",1
An employee's right ring fingertip was amputated while they were operating a deli slicer.,1
"An employee was standing in the bag room at an airport terminal when they were struck by an unmanned golf cart, resulting in a fractured ankle, tibia, and fibula.",1
"An employee was working with a milling machine and a pry bar. The machine pinched his middle finger, causing a partial amputation.",0
"An employee was pulling a cargo container with a strap when a forklift pushed two other containers that collided with the container being pulled by the employee, which rolled over the employee's right foot and trapped their foot underneath it. The employee suffered a fracture in their right second toe.",1
"An employee bent over to pick up a pallet to move it to a stock pile. As she lifted, she suffered a bulging disk that caused pain in her lower back.",1
"On February 20, 2022, an employee was cutting meat using a bandsaw and  amputated the tip of his right index finger without bone loss.",0
An employee slipped on a ramp while operating a ski lift. The employee suffered a broken left leg.,1
"An employee was on a ladder, replacing a bearing in a piece of equipment. The employee fell off the ladder, landed on his left hip on concrete, and suffered a broken femur.",1
An employee inhaled paint fumes from a nearby project. They were hospitalized with anaphylaxis symptoms and other respiratory illnesses.,1
"On February 21, 2022, an employee was using a tractor to push snow off and away from a dolly axle. The employee had shoveled most of the snow when they got off the tractor and positioned the bucket so they could slide the axle into the bucket. As the employee was trying to tip the axle into the bucket, their foot slipped on the ice and snow. When the employee fell, the I-beam on the axle crushed their hand against the side of the bucket, resulting in an injury to their finger.",1
"An employee was cleaning dough from a conveyor belt when her arm was caught in the machine, resulting in an injury to her right arm, which required surgery.",1
"On February 21, 2022, at approximately 1:15 p.m., the injured employee was working in the cleaning department of the wire mill. The employee attempted to rotate a valve handle counterclockwise from the 3 o'clock position to the 12 o'clock position with the intention of draining an acid box. The valve handle broke and caused the employee to lose balance and fall into the acid box approximately three feet away. The employee was fully submerged in the box containing sulfuric acid that was approximately 157 degrees Fahrenheit. The employee was hospitalized for second and third degree burns to a large portion of their body.",1
"An employee was working on a ladder to install ductwork when he fell 3 feet to the ground, resulting in a fractured tailbone. The employee was hospitalized.",1
"An employee was driving a concrete truck when it struck a guardrail in a parking lot. The employee, hit by the steering wheel, suffered a bruised lung and a concussion.",1
"On February 21, 2022, an employee was standing on the forks of a pallet jack to retrieve an empty pallet from a chest-high stack of pallets. The employee stepped backward, tripped over the fork, and fell. The empty pallet landed on the employee's right leg, causing an injury that required hospitalization and surgery.",1
"On February 21, 2022, an employee slipped and fell, hit her head, and lost consciousness. She was hospitalized.",1
An employee sustained a cut on their leg.,1
"An employee was walking across the work area to leave for the break room when he slipped and fell, resulting in a broken left wrist.",1
"An employee was about to make a repair to a hot water tank. When the employee turned the valve, hot water came out and scalded the employee. The employee suffered first- and second-degree burns to the chest, abdomen, left lower extremities, and right upper extremities.",1
"An employee slipped on ice on a loading dock, fell, and suffered a broken femur. He was hospitalized.",1
"An employee was lining up angle steel on a saw for cutting. The steel rolled when the saw blade grabbed it and pinched the employee's right middle and ring fingertips against the saw bed, causing amputations to both.",0
"Two employees engaged in an altercation. One employee struck the other employee with a power drill, causing a head injury.",1
An employee was re-entering a building. The employee's left index finger was pinched between the door and the doorframe. The finger was medically amputated.,0
"An employee was operating a brake press to bend parts. As the employee placed the part into the machine and pressed the foot pedal, their left middle finger and ring fingertip were amputated. The employee was hospitalized where the middle finger was reattached. The machine was unguarded at the time.",1
A temporary employee was injured when another temporary employee intentionally struck him with a half-inch piece of aluminum conduit.,1
An employee was looking into a hot asphalt lugger when a flash burned his face.,1
"An employee was carrying out an operation in which switch gears were changed. An arc flash burned the employee's right hand, forearm, and face.",1
"At about 11:15 a.m. on February 21, 2022, an employee was loading a reflector onto a punch machine. The punch activated and cycled. It came down on the employee's left hand, resulting in partial amputations to the middle and index fingers to at least the first knuckle.",0
An employee's right foot and leg were caught in in the hydraulic packing system of a rear-load garbage truck. The employee sustained injuries to the foot and leg.,1
"An employee was on the roof of a building dropping 50-pound weight bags to the ground. The employee's lanyard was caught on the bag's tab, causing them to fall approximately 30 feet to the ground below. The employee sustained a broken pelvis and broken arms.",1
An employee was removing debris from a saw when his hand contacted the blade. The employee's hand was amputated.,0
A technician arrived at a service call. He exited his vehicle and opened the passenger side door of the van to collect his face mask from the center console. A gust of wind caused the door to close on his left index finger amputating it at the first knuckle.,1
"The injured employee was hanging 400-pound fuel tank cages on a paint line. A co-worker was using  a forklift to place a stack of parts down and began to down stack the product. When down stacking the product, the forklift bumped a lower unit and the unit fell over, striking the floor and sliding into the injured employee's left heel, resulting in a crush injury.",1
"An employee was walking in a boiler room. A pipe caught his heel and he tripped, falling to the floor and suffering a broken left leg.",1
"An employee was placing items on a shelf. When she turned around, she fell over a cart that was placed in front of her. The employee hit her left arm on the cart, resulting in a fracture.",1
An employee was moving steel material using a hoist. The material slipped from the hoist/slings and fell on the employee's left foot. The employee required hospitalization and surgery for a fractured foot.,1
"An employee was climbing a 24-foot extension ladder. When he was 10 to 12 feet up the ladder, it slipped and kicked off the wall, causing him to fall to the concrete floor. The employee suffered a laceration on their face, a broken nose, and a fractured foot.",1
"On February 22, 2022, an employee had just opened the doors on the back of a truck to unload product when the wind forced a door to slam shut on his right hand. The employee suffered an amputation above the knuckle on the ring finger.",0
"An employee was plugging in a ramp lift when the outlet exploded, resulting in first degree burns to their right arm.",1
"An employee was working at a core machine. The top plate of the machine fell onto the employee's left-hand fingers, crushing them.",1
"An employee was adjusting the steady rest on the side of a lathe. The grating he was standing on slid, opening a gap, and his left leg fell into a chip conveyor trough. He suffered a laceration and fracture to the lower leg and was hospitalized.",1
"On February 22, 2022, an employee was operating a stand-up forklift in the receiving area when their left leg struck a concrete bollard, resulting in a fracture.",1
"An employee lost consciousness and fell, hitting her head on the floor and suffering a head injury. She was hospitalized.",1
"A crew was installing new facilities next to an existing sub-station in a high voltage switch-yard. After the new component was placed on its pedestal, an employee began to install a bolt and received an electric shock to his hand due to induced voltage the new equipment picked up from the existing energized equipment that was approximately 25 feet away. The employee's right hand was injured.",1
"A concrete truck driver was standing behind a second concrete truck. The second truck backed up and it's bumper hit the employee, who was knocked down. The truck then ran over both of the employee's legs, crushing them.",1
"An employee was working as a machine operator on a dry line running 3-pound bags. The powder the employee was working with made a mess and the employee lifted up the conveyor with his left hand when his right hand got caught in the conveyor's gears, resulting in a finger amputation. The conveyor was in operation at the time of the incident.",1
An employee was applying bull to the drip on a roof under construction when they slipped off the edge of the roof and fell one story to the ground. The employee suffered a back injury.,1
"An employee was operating a brake press with a sheet of metal in the press. After bending down to tie his shoe, he tripped over the foot pedal box and fell into the machine. His hands landed under the press clamp and his foot contacted the clamping mechanism pedal. This caused the press clamp to crush three of his fingers, resulting in two fingertip amputations.",0
"An employee slipped on ice in a parking lot and fell, suffering a dislocated knee.",1
"An employee was walking to her car in a parking lot. She tripped and fell to the concrete, breaking her right hip.",1
"On February 22, 2022, an employee was preparing to remove electrical switches on the south wall of a work area. The employee was working on a 4-foot step ladder and using a grinder with a cutting disk. The employee cut into a conduit containing live wires, which caused an arc flash. The employee sustained electrical shock and burns on his face.",1
"An employee was operating a machine when a loaded lumber cart moved, pinching his left hand against the machine. The tip of his ring finger was amputated.",0
An employee was using a nail gun to assemble wooden pallets when a nail was imbedded into the employee's wrist.,1
"An employee was checking the tension on a chain drive for a conveyor belt. The employee's glove caught on the chain, which snagged the employee's right ring finger. The first joint of the fingertip was amputated.",0
"An employee was operating a forklift to lift an aluminum pallet up to a second-story mezzanine. He then got off the lift to push a button to open the mezzanine gate when the pallet slid off the base of an unassembled bin. The employee saw the moving pallet and tried to move back to dodge it. The pallet struck the employee on the shoulder, pushing him to the ground and resulting in a fractured clavicle.",1
"A patient bit off part of an employee's ear, resulting in a tear that required surgery.",1
"On February 22, 2022, at 9:51 p.m., a maintenance employee was removing clogged material from a chip feed hopper when an operator in the control room turned on the machine. The valve rotated and the employee's hand was caught by the machine, resulting in finger amputations. The machine was not locked out or tagged out at the time.",0
"An employee was spreading lettuce on a conveyor when they fell to the ground, resulting in a fractured hip.",1
"An employee working in a dish room slipped and fell onto his hip, resulting in a broken hip.",1
"An employee's left ring finger was caught in the ingoing nip point of a belt and pulley, part of an exhaust system. The fingertip was crushed and the finger was lacerated; the employee also suffered lacerations to the index and middle fingers.",1
"An employee was placing a drain grate when his right middle finger was pinched between two grates. As he pulled his hand away, a piece of flesh was removed just before the fingernail, resulting in a fingertip amputation.",0
"An employee was dropping a demount box leg when the box leg landed on their right little toe, resulting in a crush injury.",1
"An employee was troubleshooting a squeaking noise coming from the air lock area of a cooling table. When the employee attempted to unclog the equipment, their right middle and index fingertips were amputated by the scissor section blades.",0
"An employee was in a scissor lift, removing a valve connected to a steel utility pipe. The valve came down and crushed his left middle finger against the guardrail of the scissor lift. The fingertip was amputated.",0
"An employee was exiting the dispatch office when they slipped and fell while walking down the stairs, resulting in a concussion and a cut on their head.",1
An employee was pulling on a pry bar to put rebar into the correct spacing. The employee tripped and suffered a dislocated and fractured right ankle.,1
"On February 23, 2022, an employee was operating an automatic palletizer machine. The employee approached the chain conveyor to adjust a crooked slip sheet on a pallet when their pullover sweatshirt sleeve was caught in the moving chain conveyor. The employee slipped on the concrete floor while attempting to free the sleeve from the chain conveyor and fell, sustaining a fractured left arm above the elbow. The employee was hospitalized.",1
"An employee was ice skating during a team event. The employee fell onto the ice, hit their head, and lost consciousness. The employee was hospitalized.",1
An employee was reaching into a hopper when a chunker paddle caught his thumb. He suffered a partial amputation below the nail.,0
"An employee was scrubbing a metal container when it fell, striking the employee's lower left leg and breaking it.",1
"An employee tripped on carpet in a corridor, fell to the floor, and suffered a broken right hip.",1
"An employee was moving steel beams with an overhead crane. The crane moved a beam forward, and it struck and broke his leg.",1
An employee jumped off a loading dock while trying to push on a self-dumping hopper that had come off its track. The employee landed on the pavement 3 feet 10 inches below and suffered a broken right leg.,1
"An employee was preparing to operate a hydraulic press when it cycled unexpectedly, amputating the employee's left ring and middle fingers.",0
"An employee was working from a truck, installing barrels and cones for a lane closure. A truck with a trailer collided with the employee's truck; the employee was ejected, fell to the ground, and suffered a broken left foot.",1
"An employee fell from a 6-foot step ladder to the concrete floor, suffering a broken right femur.",1
"An employee was training on a winding machine when their left hand was caught in the machine, resulting in a thumb amputation.",0
"An employee was repairing a misaligned cable on the left side of a warehouse door. He was using a wrench, held in his left hand, to loosen two screws at the left side of the spring tension rod area. When the screws were loosened, the right side of the metal spring wheel (where his right hand was resting) began spinning. His right-hand fingers were turned part of the way around the wheel, causing a dislocation of the middle finger and a partial amputation of the ring finger.",1
An employee tripped over a pallet and fell resulting in a broken leg.,1
"An employee was walking on a sidewalk when they slipped on ice and fell, resulting in a fractured hip.",1
"At 9:45 p.m. on February 23, 2022, a guard slipped and fell while walking security rounds near a dock door. The employee landed on the ground and suffered a broken pelvis, as well as a soft tissue injury.",1
"Two employees were transferring a patient from a bed to a chair. The patient started to fall to the floor, and one of the employees suffered a back injury while trying to prevent the fall.",1
"An employee was using a hand torch to cut a steel ingot. The ingot cracked into four pieces, one of which flew off the table and into the employee's foot, pinning it to the ground. The employee suffered a broken heel, a broken fibula, and dislocated toes.",1
"An employee was doing maintenance on an accumulator that maintained pressure for a power steering unit. As the employee loosened a valve, pressurized nitrogen gas was released from a fitting into his left hand. He suffered a 1-inch laceration to the hand and thumb.",1
An employee was cleaning saw dust from the slab edger. The employee opened the collector box at the bottom of the machine and was attempting to move saw dust into the vacuum collection system located in the collector box when his finger contacted the saw blade located above the collector box resulting in an amputation injury.,0
"An employee fell down stairs, landing at the bottom of the staircase and suffering a back injury that resulted in a loss of limb function.",1
"An employee was on the back of a truck, pulling a trash box onto the truck's lift gate. His foot slipped off the ramp, and he fell backward off the lift gate and landed on his back on the concrete street. He suffered broken vertebra in the lower back.",1
An employee was handling rigging bars weighing 40-50 lbs. and started having chest pain. The employee was hospitalized with internal bleeding that required surgery.,1
An employee tripped over a mat in a store. The employee fell to the concrete tiled floor and suffered a contusion to the left hip.,1
"An employee was doing electrical work from a ladder. The ladder slipped and the employee fell about 8 feet to the floor, suffering a broken left arm, a head laceration, and lacerated knuckles.",1
"An employee was standing on the fourth rung of an A-frame ladder. The employee slipped backward off the ladder and landed on their heels, suffering fractures to both.",1
"An employee had just finished cutting porterhouse steaks and was preparing to move them to his block for trimming and packaging. He was moving to turn the saw off when the stack of cut steaks, on the table of the saw, started to fall over. The saw amputated the tip of his right middle finger and lacerated his right index finger, causing a cut that required stitches.",1
"A temporary employee was operating a walkie rider truck when it collided with a stand-up reach truck. The employee's right ankle was crushed between the two trucks and broken. The employee was hospitalized, requiring surgery.",1
An employee was working on a line where bottles had jammed. The employee was looking at jammed bottles on the rail and also for broken links on the conveyor belt. The conveyor was jogged and the employee's left little finger was caught between it and the guard. The employee suffered a fingertip amputation (below the nail) and was hospitalized.,1
"Three employees were installing a pergola. The top of the pergola came down and hit a 12-foot ladder one of the employees was on. He fell, and the right side of his face struck the concrete ground. He suffered lacerations and developed swelling on that side of the face.",1
"An employee stood up from a seated position. As she walked away from her chair, she tripped on the chair leg and fell to the ground, resulting in a fractured left hip.",1
"On February 24, 2022, an employee slipped on ice and fell, suffering a hip injury. He was hospitalized.",1
"An employee tripped and fell at a loading dock, suffering a broken ankle.",1
"An employee was simultaneously repairing the mast on a forklift and testing it for overheating. The employee slipped and was caught between the mast and the body of the truck, resulting in several rib and thoracic vertebrae fractures.",1
"An employee was on top of the machine, watching the boxes coming out to see what was causing an issue with the machine. The employee's right foot entered the machine and was pulled in. Four of the employee's toes were amputated. The part of the machine the employee's foot entered was unguarded at the time.",1
"An employee was doing a pre-trip inspection of his tractor and trailer. He tripped on a raised area of asphalt, fell, and broke his right hip.",1
An employee was operating a chop saw when it amputated his left thumb and index finger.,0
An employee was putting a vinyl floor in the basement of a residential home. He was using a table saw to cut the vinyl when the saw amputated two fingers from his left hand. He was hospitalized.,1
"An employee was using a bandsaw to cut cow feet. A foot rolled away from his hand; while he was trying to retrieve it, the saw amputated the tip of his right little finger.",1
"An employee slipped on ice in a parking lot, fell, and landed on her right hip. The hip was broken and she was hospitalized, requiring surgery.",1
An employee was using a drill press to drill holes in a hammer handle. The rotating drill bit contacted the employee's right glove while the employee was clearing chips from the table. The employee suffered an amputation to the little finger at the first knuckle.,0
"On February 24, 2022, an employee was trying to remove a jam on a machine that was in front of a trim blower's fan intake. The employee's right hand contacted the blower fan blade. The employee suffered an injury to the middle finger that necessitated a medical revision amputation.",0
"An employee was flowing a gas well. An ice plug formed in the line (upstream) and restricted pressure downstream. The employee began bleeding off the line downstream and the ice plug released. This caused a pressure difference, sending the ice plug downstream. The ball valve that was used to bleed the line was blown off, striking the employee in the right bicep and causing a laceration. The employee was hospitalized.",1
An employee was conducting a pre-trip inspection of a school bus with the engine on. The employee's right-hand fingers contacted the fan blade while the employee checked the belt. The employee suffered an amputation to the right index fingertip.,0
"An employee was clamping a part into position to weld it using a resistance welder. The welder activated and welded the end of her index finger into a metal part. She was hospitalized, requiring surgery to repair the nailbed.",1
An employee was operating a milling machine when its rotating bit caught his glove. He suffered a finger amputation.,0
"Two employees were fighting in a warehouse. One wrestled the other to the floor, causing an injury that required hospitalization for foot and ankle surgery.",1
"An employee was loading recycled materials onto a trailer. The employee climbed onto the trailer to secure the materials, then fell off the trailer into a pile of recycled materials. The employee suffered broken ribs and a punctured lung and was hospitalized.",1
"An employee slipped on ice while walking into a building, fell, and suffered a broken hip.",1
"An employee was pouring chemicals into a mold. The mold lid closed on his left hand, causing an amputation.",0
An employee had just walked past an open dock door when a forklift driver backed out and struck him in the back. The employee was knocked to the ground and his left foot was run over by the forklift and crushed.,1
"While walking to a car, an employee slipped on snow-covered ice and fell. The employee suffered a dislocated ankle and a broken fibula.",1
"On February 24, 2022, an employee was on top of a rotary die cutter, cleaning the print cylinder. The employee's right hand was crushed between the cylinder and the pressure roll. The employee's ring and little fingers were amputated. The equipment was not locked out at the time.",0
"A delivery driver slipped on ice and fell to the ground, suffering a broken hip.",1
An employee was removing a stick from a conveyor belt and roller. The conveyor caught his jacket sleeve and his right arm was pulled in. He suffered a fracture to the upper arm.,1
"On February 24, 2022, a truck driver was standing in his trailer, doing paperwork as part of a delivery. He fell out of the trailer to the ground 4 feet below and suffered a neck fracture.",1
An employee was cutting an MDF board on a table saw. The employee was grabbing a left-over board piece when his left hand contacted the saw blade. The blade amputated the tip of his thumb.,0
"An employee was walking down stairs. The employee fell down the last four steps, landing on the concrete floor below and suffering a leg fracture.",1
"An employee was performing a visual inspection of the pulley cables in the penthouse above sterilization. The employee used a paper towel to assist in checking for burrs and defects in the cable by folding and positioning the paper towel around the three cables of the pulley system. The paper towel caught on the cable, pulling the employee's right hand into the pulley and causing a partial amputation of the little finger (distal phalange) and an avulsion injury to the ring finger.",0
An employee slipped on ice while washing a feed truck. The employee suffered a twisting injury to the right foot.,1
"An employee was operating an ice bagging machine. The conveyor belt caught the employee's hand as the employee tried to pull an item out of the machine, resulting in a fingertip amputation without bone loss.",0
An employee was exiting a delivery truck when they slipped on ice and fell.,1
An employee slipped on ice while getting out of a car. The employee suffered a broken leg.,1
An employee was working from a tubular welded frame scaffold. He lost his balance and fell about 20 feet to the ground below. He suffered fractures to a hip and a bone in his back and was hospitalized.,1
An employee was filling a tire with foam when the tire exploded. The employee sustained a head contusion.,1
"An employee was loading a truck with caustic potash. A valve gasket failed and sprayed the employee with the caustic potash, resulting in burns to their face, back, chest, and head.",1
"An employee was pushing a cart of boxes in the parking lot when he slipped on snow and ice and fell, resulting in a broken ankle.",1
"An employee was folding disposable trays on top of a container elevator. The employee tripped on a wheel, fell to the floor, and suffered neck and lower back fractures.",1
"On February 25, 2020, an employee slipped and fell on ice in a parking lot. The employee suffered fractures to left-side ribs and the left arm.",1
"A temporary employee stepped backward through a door, tripped over a metal strut, fell backward, and suffered a broken left femur.",1
An employee was working on a dump truck with blocks under the box holding it up. The employee was using a hammer to remove a block when his thumb was smashed. He underwent a partial medical amputation to the thumb.,0
"An temporary employee was pressure-washing the deck of a vessel. As he walked, his foot slipped into an opening in the grating on the scaffold. He fell into the opening and his lower right arm passed through the 40,000 psi water stream, which cut it and an artery.",1
"An employee was staging a crane to pick up a 6,000- to 8,000-pound steel roll. The crane hooks hit another roll on the roll rack, causing it to fall and strike the employee's right thigh. The employee suffered a large internal bleed in the right leg.",1
"An employee was climbing down out of a refrigerator truck. The stairs the employee was using collapsed and the employee fell, suffering shoulder and elbow fractures as well as a broken pelvis.",1
"An employee was unloading garage doors from a delivery truck. As he was lifting some panels, the banding that held them together broke and he lost his balance. The pallet broke with the shifting weight. The employee slipped off the edge of the truck and fell, landing on his left side on the frozen ground 5-6 feet below. He suffered a torn spleen and was hospitalized, requiring surgery.",1
"An employee slipped and fell while stepping out of the cab of a yard truck in icy, snowy conditions. The employee's right shin struck the truck's decking, which caused a deep hematoma; the employee was hospitalized.",1
"An employee was preparing to close a foldable, approximately 16-inch wide dock plate mounted to the lift gate of a box truck. He took a step forward with his right foot and his right leg fell through a 3- to 4-inch gap between the warehouse dock and the lift gate, resulting in an impact injury to his abdominal area.",1
"An employee was backing a forklift out of its parking spot when it struck another, parked forklift. The employee's left hand was caught between the two forklifts, and he suffered a laceration, fracture, and partial amputation to the thumb.",0
An employee was getting cleaning supplies from the back room when she tripped and fell. The employee was hospitalized with a broken pelvis.,1
An employee was clearing out a hopper before shutting down equipment for maintenance. His left leg was caught between the belt and tail pulley of a conveyor. The leg was lacerated and the ankle was broken.,1
"An employee was using a battery-powered grinder to cut a piece of metal. The cutting wheel snagged on the metal; the grinder jumped and struck the employee's left wrist, lacerating it.",1
"An employee slipped on ice while leaving a building. He fell, striking his head on the concrete and suffered a concussion.",1
"On February 25, 2022, at approximately 12:35 p.m., a postal employee was retrieving mail from the drivers' side of their vehicle. The employee was caught between the vehicle step and the curb, causing them to fall. The employee sustained a right leg fracture and a broken left leg.",1
An employee fell from the third stair from the bottom of an interior stairwell. She suffered a compound fracture to the right leg.,1
"An employee was working on a cylinder machine when a strap broke, striking the employee's left thumb and amputating the tip.",0
"An employee tripped while walking to a break room, fell, and broke her right leg.",1
"While retrieving a roll from a winder, an employee's glove became tangled in the web pulling his right hand into the winder. His right index finger was amputated.",1
"An employee was descending a stairway. His right heel caught in a gap between a riser and a tread and he fell at the second step from the floor, turning as he fell. He broke both bones in his right ankle.",1
"On February 26, 2022, an employee parked a truck at a loading area and began using an electric stand-up pallet jack to unload it. As he backed out of the trailer, the dock plate popped up, causing him to fall to the ground. The rear of the pallet jack ran over both of his feet; the left foot was sprained and the right foot was broken.",1
"An employee was putting freight into storage from a platform about 20 feet in the air. The employee fell from the platform to the floor below, resulting in a head injury.",1
"An employee was pointing out damage to be repaired when their finger was crushed between a cage and metal frame, resulting in a surgical amputation.",0
"At about 7:50 a.m. on February 26, 2022, a dry draw operator was using a welder to cut a piece of wire rod. A pneumatic cutter, part of the welding machine, activated and amputated the employee's right index fingertip just below the nailbed.",0
"An employee tripped on air hoses on the back of a semi-truck, fell off the truck, and suffered a head injury.",1
"On February 26, 2022, an employee was in the process of removing storm damaged twisted metal previously used to convey material. The employee used an acetylene torch to release the twisted metal. After cutting the metal with the torch, it sprung unexpectedly and struck the employee. The employee sustained a brain bleed, laceration, and bruising/contusions and was hospitalized.",1
"At about 11:00 p.m. on February 26, 2022, an employee was on an A-frame ladder, trying to unjam cardboard from a depalletizer machine, when the cardboard came loose and she fell. She landed on her feet and suffered a broken right knee. She was hospitalized.",1
An employee was trying to catch poultry paws as they left a vacuum system pipe chute to inspect their quality. The employee's fingertip contacted a pneumatic valve and was amputated.,1
An employee fell on ice and suffered a broken ankle. The employee was hospitalized.,1
"An employee was doing a tandem skydiving jump and had a hard impact with the ground. The employee sustained fractures to the pelvis, an arm, and a femur, as well as internal injuries.",1
"An employee was dumping a trash hopper (carried by a forklift) into an outside dumpster. As the employee was releasing a lever on the hopper with their right hand, their left middle finger was caught between the hopper and the forklift fork. The employee suffered a partial amputation from the first knuckle to the tip of the finger.",1
"An employee was climbing onto the outfeed roll case of a band mill. His left hand was on a 4-inch square tubing support beam as he stepped onto a bottom rail of the handrail. The handrail was attached to a set of steps, which tilted up. His left ring finger was smashed between the handrail and the square tubing. His fingertip was amputated.",1
A piece of steel fell on an employee's left foot during loading work. The employee suffered toe amputations.,1
"On February 27, 2022, an employee was moving a skid of ingredients with a walk behind powered pallet jack while walking backward. When he turned a corner, his right foot was pinned between the pallet jack and a concrete bollard. He suffered a broken right leg.",1
"An employee slipped on ice and fell to the ground while walking into work, resulting in a fractured right hip.",1
"An employee was walking down the stairs to leave the office for the day. The employee tripped and fell to the floor, resulting in bruising and pain in his knee.",1
"An employee was helping a patient sit up. The patient grabbed the employee by the neck, and the employee suffered a herniated disk with nerve compression. The employee was hospitalized.",1
"An employee's glove was caught in a wire respooler, which broke the employee's arm.",1
"An employee had been putting trash in a dumpster. The employee slipped in a parking lot and fell, sustaining a skull fracture and losing consciousness.",1
"A kiln car, carrying bricks, was being moved out of a dryer. It started to roll back. An employee jammed a piece of square tubing between cars to stop the car's motion; the tubing kicked back and crushed the tip of his left index finger against a control panel. The employee suffered a partial amputation to the fingertip.",0
"On February 28, 2022, an employee tripped over a hospital bed cord and fell to the floor, suffering a broken hip. The employee was hospitalized and underwent surgery.",1
"A postal employee was avoiding a dog while delivering mail. He was attempting to use dog spray when he fell and struck his head on the ground, resulting in a head injury.",1
"An employee was offloading a semi-truck using a pallet jack. When he was finished, the employee lifted the pallet jack by hand and his left thumb was pinched in a hole. The employee pulled his hand back, resulting in the nail and tip of his thumb being removed. The employee was taken to the hospital, where the tip of his thumb had to be amputated and reattached.",0
"An employee had been leveling dirt to make pipe grade and was moving toward the other end of a trench box to exit the trench using a ladder. The soil above the trench box caved in, and the employee sustained a lumbar spine compression fracture.",1
An employee was cleaning an exhaust manifold when the turbo sucked in his right hand and amputated the tip of his ring finger.,0
An employee slipped and fell on ice/snow while walking back to his vehicle after delivering a package. The employee suffered a broken hip.,1
"A pipe fitter was inspecting previously applied/added welds to the interior surface of a multi-level tank and fell approximately 14 feet through an opening in the floor to a lower level. He suffered blunt force trauma including cracked ribs, a broken wrist, broken teeth, and contusions.",1
"An employee was unjamming a stuck product from a conveyor belt when his right hand was caught in a sprocket, resulting in a right thumb amputation.",0
"Employee 1 was sitting on the back of a field truck using a knife to cut twine that ties bundles of crates together. Employee 2 came to grab two bundles. Employee 1 still had the knife in their hand when employee 2 grabbed the bundles, causing employee 1's hand to jerk; the knife cut employee 1's left eye.",1
"At 4:54 p.m. on February 28, 2022, an employee stepped backward and tripped on a pallet jack while placing items in a pickup area. The employee fell on top of the pallet jack, suffering a broken rib and a back injury. The employee was hospitalized.",1
"An employee was moving a stack of pallets with a pallet jack. He went down a ramp and was struck by the pallets and the pallet jack itself; he then fell and hit his head on the ground, suffering a bleeding/head injury.",1
"Two employees were working in a shop, repairing a piece of oilfield equipment known as an active heave drawworks (AHD) drum shaft. As one of them was inserting the bolt, the drum rotated, his crescent wrench slipped from its position, and his left hand was pinched between the wrench and the frame of the equipment. His index fingertip was amputated.",0
"An employee was clearing ice from a batch roller on a ready mix concrete (RMC) truck. The roller caught his sweatshirt and pulled in his arm. The arm was broken and he was hospitalized, requiring surgery.",1
"An employee was securing a precast concrete load on the back of a flatbed trailer. The employee slipped on ice and fell off the trailer. The employee suffered a concussion, broken facial bones, and a fractured skull. The employee was hospitalized.",1
An employee's fingers were caught in the hinge side of an interior door as it closed resulting in a fingertip amputation.,0
An employee was operating a bending machine and amputated the tip of her left index finger.,0
"An employee was trimming leather from a shoe bottom. The trimmer head caught her left little finger, and the blade amputated the fingertip.",0
"An employee was climbing a ladder when it slipped off a gutter. He fell 8 feet, suffering sprains to the right knee and right ankle.",1
"An employee was disassembling a filming set. He fell through the floor, landed on his feet, then fell onto his back and suffered a back injury.",1
An employee was adjusting a milling machine. The machine's tracks ran over the employee's steel-toed shoes. Two toes in the employee's right foot were dislocated.,1
An employee was struck by a forklift's rear steering wheels. He suffered injuries to the left leg and ankle.,1
An employee was using a pocket knife to cut the zip ties off a package for a customer. The knife slipped and impaled his left hand between the thumb and index finger causing a laceration.,1
"An employee was obtaining a sample of PVC from a rotary valve when his left middle and index fingers were caught in the valve, resulting in an amputation to both fingertips.",0
An employee was on the roof of a one-story house installing underlayment and metal accessories on a vent. He slipped on the paper backing of the underlayment and fell 11 feet off the roof resulting in a sprained back.,1
An employee suffered an abdominal injury while lifting a heavy bowl of chicken wings. The employee was hospitalized.,1
An employee was struck by a guest on a ski slope. The employee fell and suffered a back injury.,1
"On February 28, 2022, an employee tripped over a mat at a service desk. She fell, landing on the floor on her right side, and suffered injuries to the right hip, knee, and arm.",1
Two employees had replaced blown fuses on two transformers when an arc flash occurred. One employee suffered third degree burns to both arms and the face and was hospitalized.,1
An employee fell while delivering mail. He suffered broken ribs and a collapsed lung and was hospitalized.,1
"An employee was pushing a conical filter pump down a shipping ramp. The sliding ramp door began to slide down, and it smashed the tip of the employee's right little finger as the employee tried to stop it from slamming onto the equipment. The fingertip was amputated.",1
"An employee was walking beside a forklift as a spotter in the loading dock area. His boot got caught on the mast of the forklift, causing him to trip and fall. The forklift then drove over his right foot, breaking two toes and dislocating one.",1
An employee was riding in an airboat when it hit a sandbar. He was thrown and hit his head and shoulder on the bow of the boat.,1
"On March 1, 2022, an employee was doing framing work on a building. The employee fell from a ladder placed on top of scaffolding, and the ladder cut the employee's hands severely.",1
An employee was helping a patient exercise with an exercise band. The band broke and a metal piece struck the employee in the left eye.,1
"An employee was cutting fabric at a table. The employee tripped over a costume on the floor, fell to the floor, and suffered a broken right femur.",1
"An employee was cleaning a beef-trimming machine. While he was placing a scale back on it, its guillotine activated and amputated his middle finger and ring fingertip.",0
"Two employees were walking on a sidewalk. One of them stepped off the left side of the sidewalk and fell to the ground, hitting her left hip area and suffering a broken pelvis.",1
"An employee was using a come-a-long to adjust steel plates in the tumble blasting machine. When the employee released the pressure on the come-a-long, their left thumb was caught between a steel plate and the edge of the machine. The thumb tip was partially amputated.",0
"An employee was using a torch to repair a roll-off tarp arm. The employee lit the torch using his right hand and used his left hand to turn the knobs in order to regulate the oxygen and acetylene. The oxygen hose came apart and caught on fire, resulting in the employee's glove catching on fire as well. The employee received burns to his palm and lower arm.",1
"An employee was standing at the receiving dock door inside a building when a forklift that was backing up struck the employee, resulting in broken bones in their left ankle and foot.",1
"An employee was positioning a 3-foot reinforced steel pipe in a pond. The pipe had been lifted with an excavator using a cable hook to hold a chain. The chain was wrapped around the pipe in a choker position. While the employee's right hand was on the pipe, about 6 inches from the chain, the excavator moved forward and the chain caught his hand. His thumb was amputated.",0
An employee was uninstalling a paint booth. The employee had removed four of the eight bolts and was walking away from the booth when its ceiling collapsed. The employee suffered fractures to the left leg and skull and neck lacerations.,1
"On March 1, 2022, an employee was walking backward while laying out insulation on a roof when he fell 10 to 12 feet from the roof to the ground below, resulting in a broken arm and leg.",1
"An employee was conducting quality control work on installed solar panels when they were shocked while splicing wires to the solar panel, resulting in a burn across their chest.",1
An employee was lifting a 5-pound tray of 1 7/8th-inch ball bearings and suffered a hernia. The employee was hospitalized.,1
An employee was operating a tugger vehicle in a fresh meat room when his right thumb was pinched between the tugger and metal racking in the warehouse.,1
An employee suffered a broken arm while pulling down a bay door.,1
"An employee tripped over a floor mat and fell to the floor, striking her head and suffering a head contusion.",1
"Two maintenance employees were unclogging a hydrolyzer. While one of them was reaching into a portal to remove the clog, a steam pocket released steam through the portal. The other employee suffered first- and second-degree burns to the left arm and the left side of the face.",1
An employee was operating a brake press. The die slid down and crushed the fingers on his right hand. He suffered an amputation.,0
An employee was using an automated roller machine to roll a 3/16-inch-thick plate. The roller caught his left index finger resulting in a crushing injury.,1
"On March 1, 2022, an employee was unloading wheels off a paint line when a wheel fell off a hook and onto the employee's left foot. The foot was broken and the employee was hospitalized.",1
"Moving to intervene between two clients, an employee fell and broke his right ankle. He was hospitalized.",1
An employee was driving a car. A steel barricade activated below the car and smashed into it. The employee suffered a cracked sternum.,1
"On March 1, 2022, an employee left a warehouse through a side door, stepped off a curb-high cement pad onto gravel, and slipped on ice under the snow. The employee fell to the ground and suffered a broken right tibia and fibula.",1
"On March 1, 2022, an employee was working on a water well drilling rig. At about 9:15 a.m., during a coupling, the employee's right-hand fingertips were caught in drill slips. The employee suffered partial amputations to the middle and ring fingers.",1
The injured employee was trying to retrieve a tool from behind a table. A co-worker was using a pry bar to move the table; the bar slipped and caught the injured employee's left index finger. The finger was partially amputated.,0
"An employee was welding vinyl window frames on a vinyl welder. She was checking whether the parts were straight in the machine when the machine pinched her ring finger, partially amputating the tip.",0
"An employee had just hooked up a hose to a dryer and compressor. When the employee turned the compressor on, the hose broke loose and the compressor fell on the employee, who suffered leg, hand, rib, and lung injuries.",1
"An employee was walking down a hallway. The employee moved out of the way of a passing coworker who was pushing a U-frame. The employee fell onto a pallet of water, then onto the concrete floor. The employee's left hip struck the concrete floor and fractured.",1
"An employee was working on a case erector line. A box got stuck coming out of the taper. The employee removed the box, placed it on the conveyor, and then grabbed the tape to clear the jam. The tape pulled his right hand back into the machine, past the guard, and between the two sprockets. His index finger was crushed.",1
"On March 2, 2022, at approximately 1:43 p.m., three employees were attempting to lower a 42 inch (in diameter) concrete pipe into an approximately 4 foot deep trench located along a city street. The crew had lifted the concrete sewer pipe by placing an eye of a 1/2 inch diameter rope sling through an approximately 2 inch lifting hole located in the center of the 42"" concrete pipe, and placing a 1 1/2 inch bar through the eye of the sling (inside the pipe). The 1/2 wire rope sling was approximately 5 feet in length. The wire rope sling broke below the eye that was placed through the pipe, causing the pipe to fall on the injured employee and fracture both legs.",1
"A metal cage was being moved with a telehandler. An employee was adjusting the rigging for the cage when the telehandler's forks were lowered. The forks pinched the employee's left little finger against the cage, causing a laceration to the fingertip that required a skin graft.",1
An employee was harvesting citrus from a 22-foot straight ladder. The employee fell to the ground and suffered a broken neck vertebra.,1
"An employee was using a grinder to cut angle iron. The grinder hit a blemish in the iron, dislodged, and cut the employee's left forearm. The employee was hospitalized, requiring ligament repair surgery.",1
"An employee was exiting his truck when he fell to the ground, landing on and injuring his ribs and shoulder.",1
"An employee was dropping off a trailer at a yard. He walked onto a catwalk to unhook his air lines, then fell off the tractor to the ground. He suffered a head injury and was hospitalized.",1
"An employee was moving a window out of the way to erect outdoor scaffolding. When he set the window down, its latch came off and it slid shut, catching his left middle and ring fingers. He suffered a partial amputation to the middle finger.",0
"An employee was on a ladder while using a strap to secure the ladder to a structure before starting a repair job. As the employee was tightening the strap, the strap broke, causing the employee to fall off the ladder and injure his left ankle.",1
"An employee was working at a switch cabinet when it caught fire. The employee ran from the cabinet, tripped, fell, and suffered a left arm injury. He was hospitalized.",1
"On March 2, 2022, an employee was performing fire suppression work outdoors when they were  stung by a bee, resulting in an allergic reaction.",1
"An employee was cleaning aisles in a distribution center. While reaching to unjam a pallet, the employee caught a finger between the pallet and a crossbeam of the pallet flow system. The fingertip was amputated.",0
"At about 5:15 a.m. on March 2, 2022, an Amazon employee tripped while walking through a parking lot, then slipped on rock salt and suffered a broken femur. The employee was hospitalized.",1
"An employee was standing on a conveyor's rollers watching a maintenance team work on a machine. The employee fell while trying to step down, landing on the concrete work surface and suffering a broken tibia and fibula in one leg.",1
"An employee was pulling a pallet of product onto a lift gate using a manual pallet jack. He turned it to the left so he could reach the controls to operate the gate. Once the back wheels came off the trailer and onto the gate, the momentum picked up and pushed him backward. He tried to use the left side chain for support, but the pin came out of the top bracket and the chain came loose. He then fell to the ground about 4 feet below, injuring his right hip and wrist.",1
An employee was connecting the tools to the bore drill when the drill rig was turned on. The employee's right foot was amputated.,0
"At 8:30 a.m. on March 2, 2022, an employee was going up stairs when his foot caught the bottom of a stair tread. He fell three or four steps to the ground, suffering two cracked ribs and a laceration on the top of his head.",1
"An employee was running an edger machine. While retrieving a piece of wood from behind the machine, the employee was caught in the head rig area next to the saw. The employee suffered broken ribs and was hospitalized.",1
"An employee was using a demolition saw to cut a 15-inch-thick concrete pipe. The saw kicked back and struck the employee in the face. The employee suffered a cut lip, a broken mandible and broken front teeth (3).",1
"An employee tripped over a box in a storage area and fell to the floor, suffering a broken leg.",1
"An employee was on a bundle of lumber removing stickers. He fell off the lumber to the concrete below, suffering fractures to ribs and bones in his neck. He was hospitalized.",1
"An employee exited a ladder onto a roof and was traveling toward a harness tie-off point when he slipped and fell to the ground below, resulting in a fractured back and arm.",1
An employee was adjusting wire on the spool of a winding machine. The employee used the pendant to reverse the spool and grabbed the wire. The forward button was hit causing the wire to tighten on the employee's left hand and resulting in a partial amputation to the left ring finger.,0
"An employee was installing a beam when the other beam he was using as an anchor point for his fall arrest system failed. The employee fell 45 feet to the ground, resulting in broken ribs.",1
"An employee was using a blasting hose to blast rust off an industrial fan. The hose slipped out of his right hand, and while he was trying to catch it the blasting media hit his left wrist, causing a skin avulsion.",1
"An employee exited the front door of a facility when she slipped on ice and fell to the concrete, resulting in a broken lower leg that required surgery.",1
"An employee was operating a forklift. Its brakes failed as the employee tried to stop; when the employee tried to jump off it, it struck his leg. The leg was amputated below the knee.",0
An employee was taking a large propeller off a towboat using a 6-inch pad eye. The pad eye broke off the chain and the propeller struck the employee's left leg. The employee suffered a compound fracture 4 inches below the knee and was hospitalized.,1
"An employee was delivering concrete to a customer. When adding a second chute to his truck, his right index finger got caught between the two chutes, resulting in a partial amputation.",1
"On March 2, 2022, an employee was using a pressure washer to clean a natural gas compressor. When the employee attempted to adjust the slack on the pressure washing hose the water stream struck his right foot, resulting in a laceration to the top of the foot that required hospitalization and surgery.",1
A temporary employee was removing a traffic cone on a street when a delivery truck backed into him. He fell and suffered a back injury.,1
"An employee was inside a concrete mixer, oiling it, when it was turned on. The employee suffered a broken left hip and leg, as well as arm lacerations.",1
"An employee tripped on a rug in a store's produce section, fell to the floor, and suffered a broken left hip.",1
"A valve stem had been stood up against the blades of a forklift so an employee could take a measurement. It slid down the forklift fork, striking the employee's left hand and partially amputating the index fingertip.",1
"An employee was working from a scaffold in a tank. While securing bolts on the scaffold, he fell, landing about 10 feet below and suffering a broken elbow as well as head injuries that caused brain swelling.",1
An employee fell and suffered a head injury.,1
"An employee placed a log in a chipper. When the feed wheels of the chipper took the log, the butt of the log kicked upward and crushed the employee's right fingers between the log and the top of the feed chute, resulting in amputation of the ring fingertip.",1
"An employee was standing inside the opened door of a bucket truck with his left hand holding the driver side door slightly ajar while waiting for a secondary bucket truck to pull into position parallel to the employee's bucket truck. The secondary bucket truck pulled forward when the front corner of the truck bed contacted the employee's driver side door, causing their left hand to be crushed between the two vehicles. The employee suffered a detached left thumb that required surgery.",1
Two dogs attacked an employee who was delivering mail. The employee was hospitalized.,1
"An employee was standing on a step stool, putting product onto shelves. The employee fell off the stool onto a nearby chair and suffered broken ribs.",1
"At 2:50 p.m. on March 2, 2022, an employee fell into a 24-inch slitter machine. The machine's slitter knives and slitter head amputated the employee's left hand.",1
A temporary employee was operating an electric stand-up forklift to load materials from pallets onto racks when their left hand was smashed between the forklift and the racks.,1
"An employee was walking around a mortar dump box, using a water hose to clean debris out of it. The grating slid out of position and the employee's leg went into the sump water. He suffered second-degree burns to the leg.",1
"An employee had just climbed down from a 6-foot A-frame ladder and was trying to fold it. With both feet firmly on the deck of the barge, the employee took a step back and caught his foot on the lowest rung of the ladder. The employee fell backward and landed on a steel mooring cleat mounted to the outside edge of the barge. The employee then rolled off the barge and into the water 3 feet below. The employee sustained a lower back contusion.",1
"An employee was trying to cut a film wrap off a chrome roll. The blown film winder pulled in the employee, who suffered an avulsion to the left elbow and a chipped left wrist bone.",1
An employee was moving a ladder while standing on a gaylord container when they fell into the gaylord resulting in a broken tibia.,1
"An employee tripped on an ergonomic mat and fell to the floor, suffering a broken right hip.",1
An employee was bending parts in a press. A steel part pinched and amputated his right thumb tip.,0
"An employee was stepping onto a ramp when his left foot slipped on a piece of wood. He fell, and his right leg was caught by the curve at the base of the ramp. He suffered two fractures to the right tibia.",1
An employee slipped and fell on ice in a parking lot. The employee suffered broken ribs on the left side.,1
"An employee slipped on ice while walking to their car, fell and suffered a broken leg.",1
"An employee was using a spot welder when the flame contacted the pad of his right index finger, resulting in a burn and subsequent fingertip amputation.",1
"An employee fell off the rear of a freight truck during a delivery. In the 3-foot fall, the employee suffered a blow to the head and internal organ injuries.",1
"An employee was checking boars. A boar struck the employee's left leg, causing a cut to the thigh.",1
"An employee was on a flat roof installing a sound attenuator in a duct bank. While adjusting the position of the sound attenuator, the employee stepped onto a patch of snow, slipped, and fell. The employee suffered a fracture to the right femoral neck and was hospitalized.",1
An employee was participating in a firefighter training exercise when they began to feel ill due to a cardiac event.,1
An employee was using a pallet stringer notcher. A piece of pallet stringer became lodged in the machine. The employee was trying to remove it when his glove was caught and his hand was pulled into the blades of the notcher. All four fingers and part of the employee's thumb on the right hand were amputated. The machine was not locked out at the time.,1
An employee suffered a partial amputation to the left index finger.,1
"An employee was pouring concrete for a slab and foundation using a boom pump. The hose on the pump boke and fell off the boom, striking the employee and injuring the employee's hip, back, and legs.",1
"An employee fell from a boom and landed about 7 feet below on his upper torso. He suffered a right-side orbital fracture, a kidney laceration, and a wrist fracture.",1
"A temporary employee was flagging traffic on a road construction site at night. A car struck the employee, who suffered a broken right arm.",1
An employee was moving a multi-piece wheel and tire assembly when it came apart. A piece of it lacerated the employee's face.,1
An employee was attempting to clear a wire jam on a paper baler. The employee pulled on the steel baler wire when the wire moved and the employee suffered a finger amputation.,0
An employee was cleaning the top of a sedan while standing on the driver side door frame when they slipped and fell backward to the concrete floor. The employee sustained a right leg fracture.,1
"An employee was helping another employee service a bulldozer. While the track was being adjusted, a come-along chain hit the employee in the face. The employee suffered a broken jaw.",1
"An employee was working on the edge of a 3-foot excavation. He fell into the excavation, landing on his back and suffering broken vertebrae.",1
"An employee was standing at the edge of the ditch watching co-workers put in a water line when he lost his footing and fell 5 to 5 1/2 feet into the ditch, resulting in six broken ribs.",1
"Two employees were changing a battery in an order picker. While one of them was using a magnetic battery-changing device, the other began to plug in the battery. The battery shifted and pinched the second employee's right ring finger against the order picker's compartment. The employee suffered an amputation and was hospitalized.",1
An employee was walking to the side of a skid steer when he tripped over a bush and the skid steer ran over his legs. The operator of the skid steer then backed up to get the equipment off the employee. The employee suffered a broken right leg and left ankle.,1
"An employee was working on a repair in a chemical area. A separate maintenance team was shutting down the control scrubbers in preparation for a planned electrical outage. The employee noticed nitrogen oxide fumes coming from a nearby process tank. Investigating the fumes, the employee found the operation was still going on and carried out an emergency stop. The employee was exposed to the fumes for about two minutes, suffering respiratory irritation.",1
"A maintenance employee was attempting to repair a vehicle lift using a scissor lift to gain access to a pulley. When his hand was between the cable and the pulley, the cable realigned, dropped into place, and trapped his left hand against the pulley. He suffered an amputation to the left ring finger below the nail.",1
"As he was walking to the anti-spatter station, an employee was struck by a reversing forklift. It knocked him over and its tire struck his left ankle, breaking it.",1
"On March 4, 2022, an employee was walking toward a shelf when her right foot twisted inward. She lost her balance and fell forward to the floor, suffering a broken left elbow and bruising to the right hand and left hip.",1
"An employee was stepping out of a trailer. On stepping off the dock plate, he lost his balance and fell forward, striking his head, hand, and side. He suffered a forehead laceration and three broken ribs and was hospitalized.",1
"A bulldozer struck an employee's right ankle, breaking it.",1
"While exiting a single-person lift, an employee fell and struck his head on the floor. He suffered a head contusion.",1
"An employee was cleaning a concrete pump with a water hose when her left hand became caught between a cylinder and a swing tube within the pump, resulting in a crushed left hand and four finger amputations.",1
"An employee was driving a powered industrial vehicle when they turned a corner and their right foot hit a rack, resulting in swelling that required hospitalization.",1
"An employee was replacing a dust cover on an oven fan. The fan blade caught the edge of the employee's right hand, lacerating the top of the hand and the little finger, breaking the ring finger, and cutting a tendon.",1
"An employee stepped into a rail area to push a kiln car, and his left foot was caught in a groove near the car rail. The foot was crushed and lacerated, requiring surgery.",1
An employee was moving between two pallets when his feet got stuck in pallet strapping. He fell to the concrete floor and suffered a broken left hip.,1
"An employee slipped while stepping off a 2- to 3-inch-high step/cement barrier. She fell to the floor, suffering a broken pelvis, and was hospitalized.",1
"On March 4, 2022, an employee was attaching 20-foot endless round slings from a load block to a 10-ton counterweight. While the employee was attempting to straighten the outer sheath of the rigging, the load block moved and their left hand was caught between the block and the counterweight, resulting in fingertip amputations of the ring and middle fingers.",1
"An employee was using a gluer machine to make boxes. As the employee tried to clear away scrap material that might prevent its door from closing, the machine lacerated and crushed the employee's right hand. The employee underwent a medical amputation that removed the fingernail and ground the bone down.",0
"An employee was working on an overhead door. The door activated and rose, and the chains that lifted it caught the employee's fingers. The employee suffered a finger amputation.",1
"An employee was installing a rooftop solar panel. The employee fell from the roof to the ground about 20 feet below, landing in a flower bed. He suffered broken lower-back vertebrae and a broken left leg below the knee.",1
"On March 4, 2022, an employee was removing concrete wall forms from a poured concrete wall and stoop on a new residential construction project. While walking/working from the top of a concrete wall, the employee lowered a wall form to the ground and it caught the employee's clothing pulling the employee from the top of the wall to the dirt ground 8 feet below. The employee was hospitalized for facial injuries, abrasions, and a fractured left wrist.",1
An employee suffered an amputation to the left thumb while bringing down the handle of a miter saw.,1
An employee was unloading a trailer. A 300-pound wooden crate that had been stacked on load bars fell and struck the employee. The employee suffered a cracked rib and a knee injury and was hospitalized.,1
"An employee had just finished a repair on a tilt hoist. He climbed a 9-foot A-frame ladder to ensure that a nut on the chain tensioner was tight. He then climbed down the ladder, which had been leaned against the frame of the tilt hoist. When he was at the second rung from the bottom, the ladder slid down. He did not fall from the ladder but struck his right hip on the ladder as it slid down, breaking it.",1
An employee slipped and fell on black ice while walking to the rear of the trailer. The employee suffered a back and head injury and was hospitalized.,1
"On March 5, 2022, an employee attempted to reposition a sleeve that was on a tube part of an end forming machine when a clamping mechanism closed and caught their right index finger, resulting in a fingertip amputation.",0
An employee tripped and fell on the median area of a parking lot. The employee suffered a broken tibia and fibula.,1
"An employee was working on a bonder valve on a workbench. He had connected pneumatic air to the component. When the valve actuated, his finger was caught in it. He suffered an amputation to the finger.",0
"An employee was working on an automatic cutting line. Noticing that the chain had slipped off the gear that moved the material down the line, the employee accessed the machine area and tried to place the chain back on the gear. The employee's left hand became entangled in the chain, and the employee suffered amputation of the left ring finger up to the knuckle and lacerations to the left middle and little fingers. The machine was not locked out/tagged out at the time.",0
"An employee was walking down a flight of stairs when he slipped and twisted his right knee. He was hospitalized, requiring surgery on the knee.",1
An employee was using a knife to cut food and amputated a fingertip.,1
"An employee had a foot on a bottom shelf while trying to reach a top shelf. When she stepped off, she fell to the floor and suffered a right hip injury. She was hospitalized.",1
"An employee fell in a store, landing on the floor and suffering a broken knee.",1
"An employee was driving a forklift down an aisle when it went out of control, sideswiped a pallet of product, and struck a bollard. The employee's left foot was caught between the forklift and the bollard, and was broken and lacerated.",1
"An employee was working on pump frames, trying to release a stay rod. He fell and suffered a broken left foot. He was hospitalized.",1
An employee was troubleshooting the air coming out of the holes in a trim chute guard. His left index fingertip was amputated by the slitter blade.,0
"An employee was moving a safe when it dropped on his foot, amputating the left big toe.",1
A safe fell onto an employee's left big toe. The toe was amputated.,0
A Cracker Barrel employee was working on a grill printer from the top step of a step stool. The employee fell to the floor about 3 feet below and suffered a broken leg and ankle.,1
"An employee was walking across the top of a machine that was being deconstructed. He had been tasked with removing the top of the machine. He fell through an opening on the top, landing on the concrete floor 20 feet below on his feet and hitting his head. He suffered a head injury, a broken ankle and elbow, and a broken knee.",1
An employee was trying to manually unjam a component within a machine. An abrupt rotation within the machine caused the employee's left middle fingertip to be crushed between two metal machine parts. The fingertip was amputated.,1
An employee fell at the bottom stair of an outside stairway. She landed on the concrete sidewalk and broke her left kneecap in two places.,1
"An employee was cleaning a pipe. Pressurized water hit the employee in the leg, causing lacerations and puncture wounds. The employee was hospitalized.",1
"On March 7, 2022, an employee was assaulted by two people while delivering mail to a cluster box. The employee suffered head and face injuries and was hospitalized.",1
An employee was pointing to a machine roller with a bad bearing when her right ring finger was amputated.,0
An employee was working on an assembly line when sheet metal lacerated his right hand. He suffered a severed tendon and a cut artery that required surgery.,1
"An employee was using an extension ladder to retrieve items in a loft area in a garage. The ladder slid out from under him and he fell 9 feet to the concrete floor. The employee came down on his left side. He suffered a brain bleed; severe bruising on the left hip and buttock; a left rotator cuff tear; right arm/wrist pain; a sore neck, rib cage, and lower back; and a severe headache. He was hospitalized.",1
"An employee was setting up a new project in a microbiology lab. Cold water was added to hot glassware, which exploded. Glass from the exploding glassware injured his left eye.",1
"An employee was rolling a table with glassware product loaded on it. The table collapsed onto the employee, who suffered a broken lower leg.",1
"An employee was doing HVAC work inside a residential attic. The employee contacted damaged, bare electrical wires and suffered a shock to the hand and neck.",1
"An employee was using a meat and cheese slicer to slice meat. While she was moving the meat chub, the slicer blade cut two of her fingers, causing amputations.",0
"An employee was starting up an extrusion line. The employee came into contact with a nip point on a winder roll, which crushed the last joint of the employee's right middle finger and caused a fingertip amputation.",0
"An employee was repairing a leaking hose that fed acid into a mixer. After removing the hose from the mixer, he lost his balance, tried to catch himself, and caught his finger in the hose hole of the mixer as he fell to the ground. He suffered severe damage to his right middle finger from contact with the sharp sand inside the mixer hole. The fingertip was medically amputated.",0
"An employee was moving a patient onto a CT table. As he lowered the head of the patient's stretcher, his left index finger got caught in the stretcher's handle mechanism when it broke. The fingertip was partially amputated.",0
"An employee was walking to his car in the parking lot when he fell, resulting in a broken hip.",1
"On March 7, 2022, an employee was standing on pallets strapping in top freight. He lost his footing, fell backward, and grabbed the web wall, which severely lacerated fingers on his right hand.",1
"An employee was using a 5-ton overhead crane, configured with a clamp, to lift a 1,320-pound metal plate. The clamp slipped and the plate struck the employee. Both of the employee's legs were broken.",1
An employee was using an ironworker machine to punch metal. The machine caught the employee's thumb and lacerated it.,1
"At 8:00 a.m. on March 7, 2022, a warehouse employee was guiding a forklift driver. The forklift lifted up a pallet and set it down again on a stack of pallets to straighten it. It came down on the employee's right hand, causing the amputation of the ring fingertip.",0
An employee slipped while getting out of her car and broke her leg in three places.,1
The nylon strap on a service crane pinched an employee's left ring finger as the crane was lifting a load. The fingertip was amputated.,0
"An employee was working with a steel bar joist at ground level when it fell over, breaking the employee's legs.",1
"An employee slipped on black ice in a parking lot, falling and suffering a broken ankle.",1
"An employee was working from a ladder, placing a stack of equipment into a dumpster. An item fell and knocked her off balance and she fell off the ladder onto a medicine cabinet. She suffered a broken tailbone.",1
"On March 7, 2022, an employee slipped and fell to the floor behind a cashier counter. The employee suffered hand and back injuries.",1
"At 9:30 a.m. on March 7, 2022, an employee was operating a drill press when the drill paddle bit became hung up in the block. The employee began backing out the bit, and was trying to pry it free, when the shaft of the bit bent. When it came out of the block, it came around and struck the employee in the left elbow, then the upper left side of his ribs. He suffered a collapsed lung, as well as a laceration, and was hospitalized.",1
A temporary employee was moving a powered tow cart between two aircraft. The handle of the cart fell onto his right big toe and crushed it.,1
"An employee was conducting maintenance on a piece of equipment called a separator, which had been hoisted up using a crane. As the employee reached for a gasket in the separator, two of the pieces being held up came loose and landed on the employee's left forearm. The employee suffered multiple fractures.",1
"An employee was disassembling concrete wall form panels. The steel form came loose and knocked the employee to the ground. The steel form then fell on his right leg, resulting in a lower right leg fracture.",1
"An employee was fixing a machine that cuts bar stock after an alarm on the machine went off. When the employee fixed the issue, the machine started back up and the employee's right index finger got caught in the machine's bar feeder, resulting in an amputation at the first knuckle.",0
"At 11:15 a.m. on March 7, 2022, a temporary employee was training on a production line. While clearing waffle cones from the oven, she lacerated her right wrist on the oven blade and was hospitalized for surgery.",1
An employee was stacking steel plates. The plates pinched and broke the employee's finger.,1
An employee was escorting a client to the parking lot and was shot during a drive by shooting.,1
"A crane load tipped and knocked over wooden beams, which struck an employee and broke her leg.",1
"An employee became dehydrated (suffering illness, cramping, and a headache) while picking oranges. The employee was hospitalized for heat exhaustion.",1
"An employee stepped on the moving arm of a piece of dairy farm equipment, slipped, and was caught between a concrete pad riser and the milk lines. The employee suffered a broken left ankle.",1
"An employee was threading a calender stack after a paper sheet break. As the employee plugged the tail into the nip using a threading tool with his right hand, his left hand was caught up in the paper piling up beside him. He suffered partial amputations (through the bone) to the left index finger, middle finger, and ring finger.",0
"An employee was backing up a forklift when it struck another, parked forklift. The second forklift's clamp attachment entered the cab of the employee's forklift and struck his leg, dislocating the femur from the knee.",1
"Pallet racking was being moved. It had been bolted to the floor, and bolts were still coming up from the floor. An employee tripped on an elevated bolt and fell to the concrete floor, landing on his left side and suffering a broken left hip.",1
"An employee was on a ladder, performing duct work in a ceiling. Exposed wiring shocked the employee's right ear/neck area and he fell off the ladder to the floor. He suffered a dislocation at the back of his right shoulder, and hematoma in the lower back.",1
"An employee fell off a roof to the driveway 24 feet below. He suffered fractures to the left femur, pelvis, ribs, and a cheekbone.",1
An employee was ripping a 2-by-4 stake in half with a circular saw. The employee suffered a laceration to the top of the left hand and an amputation to the left index finger at the last joint.,1
"An employee was performing break-in maintenance in the hub of a turbine when the blade suddenly pitched back. The employee reached for a hydraulic tool in an effort to prevent the turbine from being damaged. The employee's left ring finger got caught between the tool and the blade's stationary locking pin position housing, resulting in amputation of the left ring finger.",0
An employee was chopping slices of cooked bacon into pieces using a chef's knife. The knife amputated the tip of his left thumb.,0
"An employee was testing a hydraulic valve on a truck. While he was trying to remove a piece of plastic from the valve, the valve closed on his left middle finger, causing an amputation.",0
An employee was driving a powered industrial truck down an aisle. The employee struck a rack (containing fuel tanks) and suffered a broken left ankle.,1
"On March 8, 2022, an employee was programming a new tool within a molding cell. The employee removed the air line and the tooling closed on the employee's arm. Their arm was caught by the cutter bar within the tooling, resulting in a laceration and fractures to their arm.",1
"An employee fell while walking in from a parking lot, suffering a broken hip.",1
An employee jumped off a forklift. The employee suffered a broken leg bone.,1
"On March 8, 2022, an employee was kneeling on a mat to apply a label to a medical instrument and take pictures during a product inspection. The employee suffered a lower back strain and was hospitalized.",1
An employee slipped and fell on ice in a parking lot. They suffered a broken leg and were hospitalized.,1
"An employee was using an overhead crane to move a coil from a staging area onto a coil stand. When the coil was placed on the stand, the chain came loose from the coil and began to swing. The employee stepped forward to stop the hook and chain before they made contact with the stand. The hook caught the stand. It shifted and the coil fell, crushing the employee's legs and causing multiple fractures to both.",1
"An employee tripped and fell while walking across railroad tracks that separated a parking lot from a work area. She suffered a fracture and tendon displacement to the left knee, which had hit concrete. She was hospitalized, requiring surgery.",1
"On March 8, 2022, an employee was driving a stand-up forklift when it ran into a walkie-rider forklift. The employee's foot was caught between the two forklifts, and the employee suffered an amputation to the big toe, a partial amputation to the second toe, a dislocation to the third toe, and fractures to the fourth toe. The employee was hospitalized.",1
An employee was disconnecting a platform from a shipping crate. The employee's right thumb was crushed between the stabilization bracket on the crate and the platform. The employee was hospitalized for surgery.,1
A forklift struck an employee and broke the end of their right femur.,1
"A large-diameter pipe was being rolled off a rack. It rolled onto an employee's foot and ankle, causing a contusion and swelling.",1
"An employee was opening and adjusting the gate flow using a ratchet to clear the dust in the gate. When trying to clear out the dust, the ratchet went into the gate area and got caught on a conveyor. The employee's finger was pinched between the ratchet and the expanded metal grating, resulting in amputation.",0
"An employee was helping another employee move a cart. He stepped in front of the cart to pull and guide it. When he grabbed the loose end of a chain strap (attached to the front of the cart), he fell backward and broke his left leg. The employee did not fall to the floor, but caught himself with his left leg.",1
An employee exited a forklift to adjust its load and developed back pain.,1
An employee was stripping wood from a concrete frame and suffered a lower back injury.,1
"On March 8, 2022, an employee was setting up scaffold walking boards on outriggers about 5 feet above the ground. He fell to the ground, landing on his left side and suffering fractures to the left collarbone and the ribcage, as well as a concussion.",1
"An employee fell in a hallway. His face struck the carpeted floor and he suffered a broken jaw, as well as a brief loss of consciousness.",1
"An employee slipped while walking up stairs. He fell and put his hands down to brace himself. His ring finger lodged into a hole in the stair tread, resulting in a fingertip amputation.",0
An employee was cutting scrap with an up-cut saw. The saw activated while the employee's left hand was near the point of operation. Its blade amputated the employee's thumb and index finger.,0
"An employee had just cleaned the vacuum on a compound miter saw. About to cut lumber, the employee put his hand behind the blade to check if the vacuum was working. The saw activated and the blade caused an amputation to his left little finger.",0
An employee was cutting a block wall with a grinder. The grinder bounced off the wall and lacerated the employee's left forearm.,1
An employee was putting material into position for processing. The employee's hand was caught in the nip point of a rotating piece of equipment. At least one of the employee's fingers was amputated.,0
"An employee suffered an electric shock and burn. The entry wound was at the knuckle of the left thumb, and the exit wound was on the inside right bicep.",1
"An employee was using a circular saw to cut plywood. As the employee was switching hands, the blade caught his left middle finger and partially amputated it.",0
"An employee was driving a powered industrial truck when it struck another, parked powered industrial truck. The employee's left leg was lacerated by a pallet guard.",1
An employee was using an air hammer to remove a wheel bearing. A piece of metal passed behind his safety glasses and embedded itself in his right eye.,1
"An employee was operating a sewing machine. She sneezed and swallowed a safety pin that she had been holding in her mouth, suffering injuries to the esophagus and stomach.",1
An employee was shutting off a ball valve on a shuttle molding machine. The shuttle moved and the employee's right little finger was caught between the molder head and the base and was amputated.,0
An employee was checking the chain alignment on an unwinder assembly. The motor engaged and its chain and sprocket caught the employee's left index finger. The fingertip was medically amputated just below the nailbed.,0
"Two employees were folding curtains. One of them fell backward and hit her head on the floor, suffering a laceration to the back of the head, a concussion and a brain bleed.",1
A cashier suffered a broken hip.,1
"At about 4:15 p.m. on March 9, 2022, an employee was filling an order in a hardware department. The employee's prosthetic left leg hit a cabinet door and folder. The employee fell to the ground, suffered a right shoulder injury, and was hospitalized.",1
"An employee was providing hospital care at a patient's home. The patient's dog attacked the employee, who suffered abrasions and bites to the head, the left side of the face, both arms, and the lower abdomen.",1
"On March 8, 2022, an employee fell off a ladder while painting. He was hospitalized for a broken pelvis, leg, and back and required surgery.",1
An employee was checking a press line that had backed up. The chunker on the line amputated her left middle fingertip.,0
"An employee was trying to clear a material jam from a packing machine. A sealing plate on the machine came down, causing a fingertip amputation. The machine was unguarded and not locked out at the time.",0
A closing trailer door partially amputated an employee's finger.,0
"An employee was about to fuel a forklift at a propane fill station. When she tried to attach the fill nozzle to the tank, propane started leaking from the connection, then ignited in a flash fire. She suffered burns to the backs of the her legs and her lower back.",1
"On March 9, 2022, an employee was replacing a bolt that connected two metal frames. The portion of the bolt extending through a welded nut on one of the frames was bent, and when the employee tried to remove the bolt, the bent end struck his left index finger and caused an amputation (without bone loss).",0
An employee tripped and fell while crossing a street from the parking garage into the building and suffered a torn right hamstring. The employee was hospitalized.,1
"An employee was at the back end of a machine where parts came down a metal chute. He was bending over, trying to center a bin under the chute, when a hydraulic switch on a painting machine caught his eye and injured it. The eye was removed.",0
"An employee was lowering the rollup door on a dock. The door slipped, and as he tried to keep it from falling its chain caught his left middle finger. The finger was amputated.",1
"An employee was operating a stand-up forklift. While the employee was trying to move out of another operator's way, their foot was caught between the forklift and a racking system. The employee's left ankle was broken.",1
"An employee fell while climbing a ladder, landing on the floor 6 to 8 feet below and suffering a broken pelvis.",1
"An employee was doing a final inspection of a metal plastic injection mold. The mold smashed his left thumb. He underwent a medical amputation to the top of the thumb at the nail bed, with bone loss.",1
"A security worker was thrown against a brick wall, then beaten, by someone she had refused to allow into a building. She lost consciousness and suffered bruises and a broken skull, with multiple brain bleeds.",1
"An employee tripped and fell over a furniture cart, suffering a broken left shoulder.",1
"On March 9, 2022, an employee was pulling the ends of packages from a buggy packed with yarn products. Her feet became tangled in the yarn strings hanging from the packages, and she fell to the floor, landing on her right knee. She suffered a broken hip.",1
An employee was directing an all terrain forklift when a bundle of plywood broke and 10 to 15 pieces of plywood landed on top of the employee. The employee suffered a broken hip and was hospitalized.,1
"An employee was coming down a ladder when it slid out from under him. He fell to the concrete slab below and suffered a broken left leg, as well as an injured left arm.",1
An employee fell off a step ladder and suffered a broken leg.,1
"An employee was operating a forklift to lift a 4 x 4 cube/tote that contained 3,828 lbs. of sodium hydroxide approximately seven feet in the air to transfer 319 lbs. into another empty tote located below the tote the employee had arranged on the forklift. The load was on the forks of the forklift suspended in the air when the forks on the lift began to creak. A second employee got on the lift to lower the forks with the suspended load. The forks began to fail due to a hydraulic leak as the load was lowering and the load slid off of the forks. The injured employee was standing at the scale area in front of the load when it slipped off of the forks and he sustained chemical burns to his face when the load fell and sodium hydroxide splashed onto his face.",1
"The regrind system malfunctioned, due to clogged resin. An employee went to the blend room to assess the issue. Once resin was flowing again, the employee was exiting the platform using a ladder and, having residual resin dust on gloves, his hand slipped off the ladder causing him to lose his footing and fall to floor. The employee suffered a knee fracture.",1
"Between 10:30 and 11:30 a.m. on March 9, 2022, a maintenance employee was working on the pulley of a conveyor belt system for fertilizer bags. The employee was trying to wipe grease off the belt when the pulley grabbed the employee's rag and pulled in the employee's fingers. The employee suffered amputations to the left index fingertip and the tips of all four fingers on the right hand.",0
"An employee was moving a cart. His little finger was caught between that cart and another, and he suffered an amputation.",0
"An employee developed abdominal pain while shoveling ice. The employee was hospitalized, suffering from an umbilical hernia.",1
"An employee slipped on snow-covered grass and fell, breaking his right femur.",1
Two employees were loading a roll of plastic film into a machine. The machine cycled while one of them was dislodging stuck film from it; its forming bucket moved upward and pinched the employee's right hand against the forming head severely injuring the fingers and resulting in an amputation. The machine was guarded at the time.,1
An employee opened the door of a clogged filtration system to look for fibers stuck in the system. He was about to tap the side of the fan mechanism to break the debris loose when a fan cut his right ring finger. He suffered an amputation to the finger.,0
"An employee was installing a wood board under a dump truck, attaching the bed to the truck using an overhead crane. When the bed was lowered, his left index finger was caught in a bolt hole and the fingertip was amputated.",0
An employee was seating steel beams for bridge work. His right little finger was pinched between two beams and partially amputated.,0
An employee was holding tubing slips as they were lowered. The slips caught the employee's left little finger. The finger was amputated and the employee was hospitalized.,1
An employee tripped and fell. The employee's head hit the sidewalk and the employee suffered a head injury.,1
"On March 10, 2022, two employees were about to change out a set of rubber tracks on a skid steer. They had hooked up the chains to attach the skid steer to a ceiling hoist and were beginning to raise its front when one employee noticed that the chains had slipped. The employee was trying to grab a chain when it crushed his left little finger against a piece of equipment on the skid steer's arm, resulting in a partial amputation.",1
"An employee was pulling a pallet jack full of produce. She was opening a double door when the pallet jack ran over her right foot. She was hospitalized, undergoing medical amputations to two toes.",1
"An employee was moving a battery yoke lifting device in the battery charging area. The device's adjustor grooves pinched the employee's left middle finger, resulting in amputation of the finger.",0
"An employee slipped on ice and fell to the ground, suffering a broken kneecap.",1
"During rigging down at a drilling rig, an employee was about to move his positioning device when he fell through a hole in the rig floor. He landed on the ground about 14 feet below and suffered a dislocated right hip and broken left and right wrists.",1
An employee was on top of a newly constructed railcar welding brackets. The employee slipped and slid down the side of the railcar to the floor. The employee sustained non-displaced skull and vertebrae fractures and a shin laceration and was hospitalized. The employee's fall protection was not secured at the time.,1
"At about 2:00 p.m. on March 8, 2022, an anesthetist developed a severe back strain while leaning over a bed to intubate a patient.",1
"An employee was standing behind his forklift, scanning freight when another forklift backed out of a trailer into him and injured his right leg.",1
"On March 10, 2021, an employee was trying to start a sleever machine (used to slide a plastic label over a plastic bottle). He was lifting the sleever's handle with his right arm while pushing on the lift lever with his left hand. The lift rose and about 1/4 inch of the employee's left middle fingertip was pinched between it and the lever. The quarter-inch of fingertip was amputated.",0
An employee fell in a parking lot. She suffered a broken femur.,1
An employee was loading packages into a van and experienced a cardiac event.,1
An employee crushed his finger and then fainted.,1
"An employee was standing on a bucket, trying to replace a light bulb. The employee fell off the bucket, landed on the ground, and suffered a broken right arm.",1
"An employee was climbing up a shelving system. A shelf shifted and the employee fell to the next shelf down, suffering broken ribs.",1
An employee was standing near a pile of power poles as they were being moved. The pile was disturbed and poles rolled toward the employee's leg. A pole broke the employee's lower leg.,1
"An employee was about to remove a pump from a pipe, part of a greenhouse heat supply. When the employee tapped the side of the pump to release it, the pump shot off and he was drenched in hot water He suffered second-degree burns on multiple body parts.",1
"An employee had climbed a ladder to observe the gears in a malfunctioning auto re-hanger. The gears caught the employee's coat sleeve, and he suffered a forearm avulsion.",1
"An employee was pushing a food cart in a dining lounge. Her foot slid forward and caught under the cart, causing her to fall backward. Her foot remained under the cart and her right arm went between two chairs, preventing her from stopping her fall. She suffered an open fracture to the left femur, as well as fractures to the right humerus and the left nasal bone.",1
"An employee was on a scaffold. A plank snapped and the employee fell 6 feet to the ground below, suffering an injury to the right knee that required surgery.",1
An employee was moving a 450-pound sandblasting pot out of a work van. The pot went out of control as it was being maneuvered to the ground and pulled the employee down with it. The employee's face struck the pot and their right hand was caught between the handle of the pot and the ground. The employee suffered three crushed fingers.,1
Two employees were cleaning a printing press machine. A rag fell into the machine and one of the employees tried to retrieve it. The machine degloved the employee's left hand between the ink roller and the rubber roller. The employee suffered amputations to the left ring and little fingers.,1
An employee fell from a roof to the ground and suffered a back injury.,1
"While turning to chase someone, a border protection employee suffered a broken right femur and fell.",1
"An employee was doing a dry-in on a roof when he slipped and fell off the roof. He suffered a broken hip, broken ribs, and a cut on the head that needed stitches.",1
"An employee was painting stairs using a sprayer. He got tangled in the sprayer's hose, tripped, and fell down the stairs, suffering a back injury and six broken ribs.",1
"An employee fell from a flatbed trailer, landing on the ground and suffering broken ribs.",1
"At 10:08 a.m. on March 10, 2022, an employee fell off a flatbed truck while strapping down equipment. The employee landed on dirt on gravel and suffered a concussion, scrapes, bruises, and a kidney contusion.",1
"An employee was installing wood decking on a third-story roof. The employee fell over the roof edge. The employee's vertical life line caught just before the employee hit the ground, and the employee suffered a broken left ankle, a lesion on the right foot, and rope burns on both hands.",1
"An employee fell off the third step of a folding ladder, landing on the concrete floor and suffering a fractured skull and broken back vertebrae.",1
"On March 10, 2022, an employee was putting ice in a drink machine using a step stool. She slipped and fell to the floor, landing on her side and suffering a broken left hip.",1
"An employee placed a mast platter (aluminum disc) in a vise inside a CNC machine and programmed the machine to mill the top so that it was level. A tool used to level the mast platter became caught on a drilled hole. The employee went to stop the machine when the mast platter became airborne, broke through the closed CNC machine plexiglass door, and struck the employee on the abdomen. The employee sustained a laceration to the left side of his abdomen.",1
"An employee was checking for supplies on a loading dock. The employee tripped over a curb stop on the dock and fell, suffering a hip/upper femur injury.",1
An employee was washing dishes when a knife in the sink cut his left hand. The wound became infected and he was hospitalized.,1
"An employee was loading a metal roll onto a roll machine. His hand was on the metal roll, it got caught in the machine and his arm was broken.",1
An employee was in a lift installing parts inside a wind tower. The lift moved up while the employee's foot was outside it and was caught between the lift and a ladder rung. The employee's toes were amputated and the employee was hospitalized.,1
An employee's toes were amputated after being run over by a forklift.,0
"An employee was carrying a toolbox up a portable extension ladder. The employee fell from the ladder to the floor, suffering a broken leg.",1
"At about 2:00 a.m. on March 11, 2022, an employee was collecting a product sample from a macerator unit using an extended bar with a cup at the end. When the employee opened the small compartment of the macerator to collect the sample, the bar became stuck in the auger. The employee's left hand was caught between the bar and the edge of the compartment door. He suffered a radial fracture to the index finger.",0
"An employee had been operating a grinder machine. As the employee tried to pick up a dropped part, the machine pulled in the employee's hand. The employee suffered a laceration under the ring and little fingers that required stitches, as well as a broken ulna and radius.",1
"An I-beam rafter structure had been assembled on the ground and was standing on its edge, about to be lifted. An employee was tightening a bolt on the structure with a torque wrench when the structure fell onto the employee's left leg. The employee suffered a broken left femur.",1
A captive bolt device punctured an employee's abdomen.,1
"At about 3:00 p.m. on March 11, 2022, an employee slipped on liquid while moving a pallet, fell to the concrete floor, and suffered a pelvic injury.",1
A temporary employee was unrigging a crane load of lead pipes. The load struck his leg and broke it.,1
An employee tripped on the leg of a welding curtain stand. The steel toe plate in his boot hit a bone in his foot.,1
An employee's left thumb was pinched in a brush machine when its jog function was activated. The thumb tip was amputated.,0
An employee fell off a ladder while disconnecting electrical wire drops. The employee suffered wrist fractures.,1
"An employee slipped on ice and fell onto a concrete sidewalk, breaking his left foot and dislocating his ankle.",1
"An employee tripped over a pallet and fell. He suffered a broken hip and was hospitalized, requiring surgery.",1
An employee tripped over a cord while walking. The employee fell to the floor and suffered a broken right hip.,1
"An employee was tightening a sling around a roller to remove it from a lathe. When the employee tightened the sling, their left hand was pinched between the sling and the roller. The pad of the employee's left middle fingertip was pulled off, as was the nail.",1
"On March 11, 2022, an employee was walking down a flight of stairs. The employee fell at the bottom step and suffered a broken right ankle. The employee was hospitalized, requiring surgery.",1
"An employee was assaulted by a patient. He was pushed, hit the wall, and fell to the ground.",1
"An employee was operating a forklift when it struck a metal pneumatic pipe on the wall. The employee's right hand was pinched between the forklift's frame and the pipe, and the ring finger was crushed.",1
"An employee tripped over a bench in a dining area. She fell to the floor, landed on her arm, and suffered a broken wrist.",1
An employee was putting sheet metal on a rack. Part of the rack system fell over onto the employee's feet. The employee's right foot was broken.,1
An employee was trying to clean a conveyor belt/fin blade under a dough chunker. The fin blade caused a partial amputation to a finger on the employee's left hand.,0
An employee tripped on a curb and fell. She suffered a blunt-force injury to the left side of the face (in the eye/ear area) and a bruised left wrist.,1
"An employee was in a section of a machine, helping investigate a jam. The machine was activated and a part closed in on the employee, who was pinned between the forks of the machine. The employee suffered a pinched artery and a swollen stomach.",1
"A forklift ran over an employee's foot, crushing it and breaking bones.",1
"A driver was climbing down a tanker trailer ladder. At the next to last step, he lost his footing on the icy ladder and fell to the flat concrete ground. He suffered a fracture to a lower-back vertebra, as well as other injuries.",1
"Two employees were disassembling a machine. As both employees tried to place a column on the ground, it tilted to one side. The column fell and struck one of the employee's resulting in a broken right ankle. The employee was hospitalized, requiring surgery.",1
An employee in training was pushing a trenching machine when he suffered a broken forearm.,1
An employee was adjusting forks on a forklift. The employee's right thumb was caught between the forks and the tip was amputated.,0
"An employee tripped while stepping off an electric pallet jack, fell, and suffered a hip injury.",1
"An employee was carrying a box down a three-step stairway. The employee fell down the stairway and suffered fractures to the left arm, the left knee, and the right side of the pelvis.",1
"An employee was removing a pair of rare earth magnets for maintenance. The magnets got close to each other and came together, amputating the tip of his right thumb between them.",0
"An employee was walking through a stockroom. The employee's foot snagged on a pallet on the floor; the employee fell, suffering a broken hip.",1
"An employee was cutting scrap wood pieces with a 12-inch blade on a miter saw. The employee's left glove made contact with the blade, which cut into the employee's hand and amputated the thumb.",0
"At 12:16 p.m. on March 11, 2022, an employee fell while descending a 20-foot extension ladder, landing on the floor about 10 feet below and suffering broken wrist bones and vertebrae.",1
An employee was walking out of the back produce area when she fell to the concrete floor and suffered a broken ankle.,1
"An employee was helping move a drill pipe into position. While the pipe was being lifted, the lifting eye came out and the pipe fell, striking the employee in the abdomen. The employee suffered an internal injury and was hospitalized.",1
"On March 12, 2022, a large heater in a facility malfunctioned, exposing employees to carbon monoxide. One employee was hospitalized for carbon monoxide poisoning.",1
"An employee was working on a fabric calendar line. As he was cleaning paint off a tension roller, the fabric caught his glove and pulled his left hand and forearm under the roller. He suffered a compound fracture to the forearm.",1
"On March 12, 2022, an employee was working from a ladder to service a customer's communication line. The pole broke, and the employee fell about 15-20 feet to the ground along with the ladder. The employee suffered facial fractures and bruising to his body. He was hospitalized.",1
"An employee was loading a charge furnace with a 3-foot by 3-foot copper cathode sheet weighing 300 pounds, using a crane. The overload alarm activated. As the employee tried to remove the cathode charge from the furnace with the crane, it struck the employee, who suffered burns to the lower back, left side, left arm, and left hand.",1
"An employee was welding on a column. The employee's shirt caught on fire, and the employee suffered third-degree burns to the arm and side.",1
"An employee was loading bag resins onto a bag dumping station and wrapping/bundling up empty bags for disposal. The employee was dislodging a broken piece of wood that jammed in the conveyor's chain and sprocket when their gloved hand was caught in the conveyor, resulting in a finger amputation.",0
"An employee was exiting the back of a catering truck. The employee slipped and fell to the ground, suffering an injury to the right elbow.",1
An employee was placing pipe into a tubing bender. The machine amputated the employee's right thumb tip.,1
"An employee was walking by a masonry block wall at the side of a garage. A gust of wind caused part of the wall to collapse onto three employees, one of whom suffered a broken right ankle and a head injury that required staples. That employee was hospitalized.",1
An employee was shot in the leg outside the facility by an assailant who was not an employee. The employee was hospitalized.,1
"At 10:15 a.m. on March 12, 2022, an employee was using a truck-mounted log loader to load logs on a truck. The truck began to slide down an incline toward a pond. When it came to a rest at the pond, the mounts of the knuckle boom broke and the employee was thrown from the machine to the ice on the pond. The employee suffered possibly broken ribs, as well as a cut to the head, and was hospitalized.",1
"An employee was installing a pipe into a placing boom. The pipe was suspended by a tower crane with a nylon strap using the hitch and a half hitch rigging method. The pipe slipped in the rigging and dropped 3 to 4 inches, crushing the employee's right thumb and little finger. The thumb was amputated and the little finger was severely lacerated.",1
"An employee was driving a forklift out of a freezer. The forklift slid into a bin, and the employee's right index finger was broken.",1
An employee fell in the middle of a trail while giving a ski lesson. The employee was hospitalized.,1
"An employee was trying to unclog an auger when the auger shaft caught his jacket and pulled in his right arm. The jacket wrapped around the shaft and caused severe damage to the employee's right arm. The employee was hospitalized, and the arm was medically amputated between the elbow and the shoulder.",1
A forklift backed into an employee who was cutting straps off a pallet. The forklift struck the employee's mid- to upper back; the employee developed back pain and was hospitalized.,1
"An employee was driving a powered industrial truck when their left foot struck a column, resulting in a broken ankle.",1
"An employee was restacking a pallet when he tripped on a box that had fallen from it. He fell to the floor, suffered a broken right hip, and was hospitalized.",1
"At 10:02 p.m. on March 13, 2022, an employee was unplugging a rotary valve (the chute was clogged and the metal and cloth guard was damaged). The machine was turned on while the employee's right-hand fingers were in the valve. The employee's ring and middle fingertips were amputated.",0
"On March 13, 2022, an employee fell from a ladder as he tied off to a one-story house. He landed on the ground about 9 feet below and suffered broken ribs.",1
"On March 13, 2022, an employee was patrolling the area when they tripped over a high curb and fell to the ground, resulting in injuries to their nose and right hip.",1
Employees were looking at an intake fan problem on a press. One employee was testing the tension on a belt when his right index finger was caught between the belt and the pulley. He suffered a partial amputation to the finger.,0
An employee was cutting beef feet on a meat saw. The blade caught and a beef foot part jumped. The saw amputated the employee's left middle finger between the first and second joints.,0
"An employee fell while reaching for a door handle, suffering a broken hip. The employee was hospitalized and underwent surgery.",1
"After descending a flight of stairs an employee stepped onto a pallet that was next to the bottom of the stairs. The employee slipped and fell from the pallet to the floor, sustaining a broken hip.",1
"At 7:14 p.m. on March 14, 2022, an employee was walking behind a pallet jack selecting product. Her left ankle was caught between the pallet jack and the racking and was broken.",1
"An employee was on a ladder, putting material away on an upper storage area. The ladder slid and the employee fell to the concrete about 9 feet below. The employee suffered ankle, wrist, and back injuries.",1
"An employee was coming down a step ladder. He fell at the last step, twisting his knee and dislocating his kneecap. He was hospitalized.",1
An employee was preparing to splice a wire to a terminal using a benchtop pneumatic wire splicer. The splicer activated and lacerated the employee's left index finger. The pad of the fingertip was medically amputated.,0
"On March 14, 2022, an employee was checking a suspected vacuum leak on a CNC saw machine. The employee's left hand contacted a moving saw blade, resulting in an amputation to the index finger at the last knuckle.",1
"An employee slipped on an icy, snowy sidewalk and fell, suffering a broken kneecap.",1
"An employee slipped on a patch of black ice on a walkway and fell, suffering a broken knee. She was hospitalized, requiring surgery.",1
"An employee was opening a gate to access a dumpster when they were chased by a dog. The employee tripped and fell to the ground, resulting in a broken right tibia that required hospitalization.",1
"At about 6:15 a.m. on March 14, 2022, an employee was trying to retrieve a fallen propane tank on a production line when her right middle finger was caught by the tank and the clamp that advanced the tanks. The finger was partially amputated.",0
"An employee slipped on an icy sidewalk and fell. The employee suffered a broken ankle and was hospitalized, requiring surgery.",1
"On March 14, 2022, an employee was using a crane to load a 2.5-ton ink roll into a printing press. When the suspended cylinder swung, the employee's middle finger was pinched between the crane coupling and the metal housing of the motor. The fingertip was amputated.",1
"An employee was cutting metal heat sinks using a table saw. The employee suffered a thumb amputation, caused either by the sawblade or the metalwork.",0
"An employee slipped on ice while walking into work. The employee fell, suffering a fracture at the end of the left femur, and was hospitalized.",1
"An employee was returning a pallet to his truck after a delivery. While he was adjusting the pallet, which weighed 100-200 pounds, it moved and caught his right little finger against the truck's pallet-securing device. The tip of his little finger was amputated and he suffered a nailbed avulsion.",0
"While preparing to make a delivery, an employee fell backward off a truck's lift gate, landing on concrete and suffering a broken leg.",1
"An employee was trying to retrieve a magnet from inside a powered conveyor. The conveyor arm dropped down and crushed the employee's right arm against the conveyor's frame. The employee suffered a torn artery and muscles in the arm and was hospitalized, requiring surgery. The machine was not locked out/tagged out at the time of the incident.",1
"An employee was working on a line in a chicken breast processing department. The employee was clearing a jam (consisting of two full chickens, minus the wings and legs). One of the chicken bodies contacted the employee's right hand, causing it in turn to make contact with a rotating 12-inch saw. The employee's middle finger was amputated.",0
"An employee was on a fiberglass step ladder, about 3 feet off the ground, capping off a dead air line. The employee fell off the ladder and suffered two broken ribs, a punctured lung, and head trauma.",1
"At about 9:30 a.m. on March 14, 2022, an employee was using an oxygen/acetylene cutting torch to remove an old grain hopper from its frame. The torch caused a flash inside the hopper. The flame came through the hole the employee had created and burned the employee's face. The employee suffered second-degree burns and was hospitalized.",1
"An employee was working from a rolling baker scaffold, hanging drywall. When the employee pushed one way, the scaffold went the other way, causing her to fall and hit her head on the window sill and then the ground. She suffered injuries to the forehead and an arm.",1
An employee was loading packages and suffered a same-level fall to the floor resulting in a concussion and hospitalization.,1
"An employee was working at a laminator machine. As the employee applied a flag to a damaged area of the laminate that was being made, his left hand was pulled into a set of powered metal rollers about 4 inches in diameter and 5 feet wide. He suffered an amputation to the middle fingertip at the first knuckle, as well as loss of nails on several other fingers and severe tissue damage.",1
"An employee was traveling in an aerial lift when it drove over a bump. The lift basket bounced and the employee fell back in the lift, striking the metal cover for the safety pedal. His leg was broken above the ankle.",1
"An employee was replacing the bearings on the roller of a sorter machine. The roller shifted, and the employee's right middle fingertip was caught in the chain and sprocket. The fingertip was amputated.",0
An employee was doing decking work at a new construction site. The employee fell more than 6 feet to the ground and suffered a broken hand/wrist and a broken hip.,1
"An employee was on a catwalk when it gave way. The employee fell 11 feet into a concrete vault, suffering a broken left hip and left-side ribs.",1
"An employee saw fumes coming off a filter canister and tightened the bolts on top of it. When he turned to walk away, the bolt sheared and he was sprayed with titanium tetrachloride (TiCl4). He suffered chemical burns to the left wrist and forearm and was hospitalized.",1
An employee fell while trying to sit down in a chair. The employee suffered a broken hip and was hospitalized.,1
"At about 11:30 a.m. on March 14, 2022, an employee was preparing to move a patient to a new location. The employee tripped over cords or tubes leading to the dialysis machine being used to treat the patient, fell to the floor, and suffered a broken right hip. The employee was hospitalized.",1
"An employee was painting a ceiling from a scissor lift platform extended to about 7 feet. As the lift was being backed up, one of its tires dropped into an open section in the floor, and it fell over. The employee's right hip was injured where it struck against the lift's top rail.",1
An employee was driving an electric pallet jack when it collided with a forklift. The employee's left foot was struck by the front of the forklift and pinned against the pallet jack driver's platform. The employee suffered a compound fracture to the foot.,1
An employee was nailing plywood as part of a roof decking job. The employee fell from the roof trusses to the dirt ground about 12 feet below. The employee was hospitalized for C6 and C7 vertebrae fractures.,1
"An employee was operating a box machine. While the employee was removing cardboard knock-out debris from the operator load area, the machine's primary pusher caught her right little finger, causing its amputation at the last joint.",0
"An employee was running sucker rods back into an oil/gas well. The transfer chain broke and struck the employee in the head, lacerating it and causing him to lose consciousness.",1
"An employee was repairing a timing belt on a machine. The machine went into ""jog mode"" while his hand was on a drum, and its timing belt and gear injured his right little finger. He underwent a revision amputation to the fingertip. The machine was not locked out at the time of the incident.",0
An employee was bitten on both arms by a dog while delivering mail to a home.,1
A machine operator was monitoring fortune cookies at they came out of molds. The wrapping machine used to package the cookies stopped after becoming jammed with plastic film. The machine operator had restarted the machine and begun clearing the jam when his right hand contacted the rotating blades that cut the film packaging. He suffered lacerations to the middle finger as well as a partial amputation of the ring finger.,1
"An employee was cutting liner using a water jet machine. The blade from the water jet cut the top of his left hand and he was hospitalized, requiring surgery to repair a tendon in his middle finger.",1
"Employees were raising a forklift load of rebar mesh to the fourth floor of a building. An employee tried to separate the forks and the rebar rolled on his hand, crushing two fingers.",1
"On March 15, 2022, an employee fell from a 2-foot-tall step ladder to the floor, suffering a compression fracture to his back.",1
"On March 15, 2022, an employee slipped while climbing down a truck ladder. The employee fell to the gravel about 7 feet below and suffered a compound fracture to the ankle.",1
"An employee was replacing the hydraulic hose on a forklift. The top of the forklift's mast came down and crushed the employee's right wrist, breaking bones.",1
"While responding to a patient emergency, an employee slipped and fell in a hospital hallway. The employee landed on the floor and suffered a ruptured spleen that required surgery.",1
Two mechanics were working to replace bearings on a cooling rack on a mixer. The mechanics were rotating the chain around the sprocket by hand to get to the master link chain. The chain slipped and an employee's right hand was caught between the chain and the sprocket resulting in amputation of the middle fingertip.,0
"On March 15, 2022, an employee was using a cutting machine to cut belting material for a conveyor. The machine amputated the employee's left index finger below the nail.",0
"At about 6:30 p.m. on March 15, 2022, an employee was using a vertical sewing machine to work on the border of a mattress. The machine jammed, and the employee was trying to clear it when their hand slipped into the machine. The chop blade activated and amputated the employee's right index and middle fingertips between the nail and the first knuckle.",0
"An employee was working from the boom basket of an aerial lift. As he lowered the lift, the boom landed on a metal standpipe. The water hose and nozzle at the standpipe's top rim broke under the weight of the boom; the boom shifted and dropped the basket to the ground 12-18 inches below. The employee suffered a broken left femur.",1
"An employee was working to depressurize lines of anhydrous ammonia for service work. The employee began to disconnect nuts. Pressurized ammonia began to leak from the pipe. To protect the plant and other employees, the employee grabbed the nut and manually tightened it to stop the leaking. This action caused burns to the employee's right hand.",1
"An employee was cleaning dust from a collector. His left hand was caught in a rotary valve, which amputated his left index and middle fingers.",0
"An employee was using an emery cloth to clean a part on a lathe. The rotating jaws of the chuck caught the cloth and pulled in his gloved left hand, deeply lacerating the middle finger. The fingertip was medically amputated just behind the nail.",0
An employee was using a rag to clean the rollers of a lamination machine. The rollers pulled in his left hand and crushed it.,1
"On March 15, 2022, an employee was adding cement as part of building an underground pool when he found a piece of small rock stuck on the screen covering a mixing machine. As he tried to remove it, the machine's rotating metal blade amputated his left index finger about a half inch from the tip. The employee was hospitalized.",1
"An employee slipped and fell to the ground, suffering a head injury and a broken left arm.",1
"An employee was standing at a receiving workstation, performing tasks on a moveable hydraulic lifting table. A forklift struck the hydraulic table, causing the employee to suffer a broken tibia.",1
"An employee tripped and fell to the floor, suffering a broken right hip.",1
"An employee was offloading luggage. As he reached out to catch a dropped scanner, a grate caught and amputated one of his fingertips.",0
"An employee was operating a machine. He reached to move a copper tube, and the tube pinched his left index finger against the wall. His finger was amputated at the first knuckle.",0
A sanitation employee was preparing to clean a machine when his hand was caught between the roller's on the machine's conveyor system. The employee suffered a broken arm that required surgery.,1
"An employee was sitting in a cafeteria chair. As the employee attempted to move the chair, their right middle finger was caught between the seat and the chair's steel frame. The finger was amputated.",0
"An employee was overseeing the operation of a sawmill wood chipper. As he tried to unjam a piece of wood in the chipper, the piece dislodged and caught his left hand against the upper side of the chipper mouth. His little finger was medically amputated.",0
"An employee was troubleshooting an issue on a production line. Laminator rollers caught the employee's hand, causing a finger amputation.",1
"An employee was ascending a fixed ladder while carrying equipment. The employee attempted to grab the top rung of the fixed ladder, lost their balance, and fell approximately 10-15 feet onto finished concrete.",1
"An employee fell off an aircraft ladder, suffering a broken arm and leg.",1
"An employee was loading a box truck parked at a loading dock. A ratchet strap that he was using came unhooked, causing him to fall backward through a gap between the truck and the building. He landed on his back on the asphalt below and suffered a back injury, as well as a head laceration.",1
"An employee was directing a crew to cut a tree in an electric line's right of way. The tree fell the wrong way and knocked the employee to the ground, then landed on a utility vehicle and rolled back onto the employee. The employee suffered broken ribs and a contusion.",1
Employees were setting coping on a wall with an excavator. The excavator pulled on a piece of coping (weighing 800-1000 pounds) and caused it to tip over. It fell onto an employee's lower legs; the employee suffered a broken hip and was hospitalized.,1
"An employee slipped and fell in a dairy heifer barn. The cows panicked, ran, and trampled the employee, who suffered contusions all over the body, a collapsed lung, and liquid inhalation.",1
An employee suffered a finger amputation while using a chop/miter saw.,0
"An employee was pulling freight to the tail of a trailer. Straps broke and he fell out of the back of the trailer onto the pavement, hitting his head.",1
"An employee was climbing down a ladder. The ladder broke while they were climbing down, causing the employee to fall 12 feet to the ground and resulting in fractured L2, L3, and L4 vertebrae in their lower back.",1
"An employee was climbing down an 8-foot A-frame step ladder. His safety shoe became wedged in one of the steps and he fell backward to the floor, suffering two compression fractures.",1
"An employee was working on a steel plate, about 1 foot by 8 feet, to be installed on a structure that was being fabricated. He stepped on a piece of metal that had been welded to the plate, causing the plate to strike him in the shin. He suffered a laceration and was hospitalized, requiring surgery.",1
"An employee was taking equipment out of service. He was replacing bolts when a drive roll came down on his left hand, crushing the middle finger and causing injuries to two other fingers.",1
An employee was operating a roll-up machine when his right little finger was caught between its roller and clamp bar. The employee suffered an amputation.,1
"An employee fell from a lift while repairing a garage door, landing on both feet on the concrete about 10 feet below. The employee suffered a dislocated right ankle with an exposed bone.",1
An employee's right hand was caught in an office door. The middle finger was partially amputated.,0
An employee was moving a load to a work table. The load shifted and pinched the employee's left little finger against the table. The employee underwent a medical amputation to the finger.,0
"An employee was conducting maintenance on a jammed garage bay door. The employee was trying to dislodge the door by pulling on a rope when the door suddenly loosened and came down with enough force to send it back up its tracks. The top part of the door disconnected from the railing, swung back, and struck the employee. The employee suffered injuries to two neck vertebrae.",1
"An employee was setting steel column. While removing the clamp, the employee's right ring fingertip was pinched when the clamp slid resulting in amputation.",1
"On March 16, 2022, an employee was using a pneumatic drill to drill holes in a metal fixture. The drilling location was about 6 feet from the floor, and he was using a 2-foot A-frame stepladder to reach it. He fell from the second step of the ladder to the floor about 2 feet below; suffered a dislocated shoulder and a broken pelvis; and was hospitalized, requiring surgery.",1
"An employee was hooking a dolly to a trailer. The dolly connection pinched the employee's left little fingertip, causing its amputation.",0
"An employee was walking on top of a wooden pallet and 55-gallon drums in a warehouse. He fell, landing against the drums and an adjacent pallet (about 4 feet below) and injuring multiple ribs.",1
"At 5:08 a.m. on March 16, 2022, an employee was operating a forklift near a dock. The forklift backed out of the dock door into an empty space without a trailer and fell to the ground about 4 feet below. It then rolled onto its side and caused fractures to the employee's right hand, left leg, and left foot. The employee was hospitalized.",1
"At about 5:30 p.m. on March 16, 2022, an employee was trying to light the fire in a boiler. He threw diesel into the boiler's fire box through a small door on the front of the boiler, but the air pressure in the boiler caused the diesel to come back and set his shirt on fire. He suffered first- and second-degree burns.",1
"An employee was descending a ladder. The ladder became unstable and she fell, landing on the ground 9-10 feet below and suffering a broken leg.",1
"A border patrol agent was following a group of people through a pasture. While crossing a barbed wire fence, the agent suffered cuts to the legs. The agent developed blisters and swelling and was hospitalized.",1
"Employees were moving a work platform when a support jack failed, causing the unit (which weighed 3,640 pounds) to come down onto an employee's right foot. The employee suffered a fracture to the foot and a skin avulsion to the big toe.",1
"An employee was trying to help a patient in a hospital day room. The patient pushed the employee to the floor, and the employee suffered a fractured humerus and radius as well as a pelvic injury.",1
"An employee was carrying a lunch box to a break room. She tripped on a spot of dried glue on the floor and fell, injuring her right hip and lower back. She was hospitalized.",1
"An employee was driving a lift truck around a column in an aisle. While swerving to miss the column, he jumped off the truck, and his left foot was crushed against racking.",1
An employee was mopping a break room. She tripped over a broom that was leaning against the wall and suffered a broken hip.,1
"At 7:20 a.m. on March 16, 2022, an employee was salting sidewalks when he slipped on ice and fell. He landed on his right leg and suffered fractures to the right tibia and fibula.",1
An employee was climbing a fixed ladder on a front-load garbage truck. The employee fell from the ladder to the ground and suffered a broken leg.,1
An employee was preparing to do excavation work to remove a buried gas tank. He used a cutoff saw to cut off a vent pipe to the tank. Sparks from the saw ignited gasoline vapor causing an explosion. The employee suffered burns and broken ribs and was hospitalized.,1
"An employee found a leak at the wash cap on top of a tanker trailer. The employee was trying to tighten the cap when it blew off. It struck the employee in the face, causing facial fractures and avulsed teeth.",1
"An employee was forming a part on a forming machine. He was trying to adjust an aluminum shim within the machine's gripper jaws when they crushed his left little fingertip, causing a partial amputation.",0
A paramedic was crossing a ditch to reach an injured person. His right knee was hyperextended and he suffered a partial tear of the right quadriceps tendon. He was hospitalized.,1
"An employee contacted a 7,200-volt electrical line while installing new electrical service. The employee suffered burns to both arms and the chest; the employee's right arm was amputated below the elbow.",1
An employee was standing behind a truck as it was parallel parked. The employee was struck by the truck and wedged between it and a parked vehicle. The employee suffered a lacerated liver and a bruised kidney and was hospitalized.,1
An employee was climbing down a ladder when it slipped. The employee fell about 10-15 feet and suffered a broken leg/ankle. The employee was hospitalized.,1
A temporary employee was shot in the stomach and left elbow by another temporary employee. The employee was hospitalized.,1
An employee was trying to put a roll-up door back into its track. The door broke free and pulled his right hand into the roll. His middle finger and arm were broken.,1
"At about 10:15 p.m. on March 16, 2022, an employee was making repairs in a paver machine. The machine caught the employee's left arm and amputated it near the elbow.",1
"A skid steer backed into an employee, pinning his legs against a pickup. Both of the employee's legs were broken and he was hospitalized.",1
"On March 16, 2022, an employee was on a production line, taking a vehicle body on a carrier pallet, when the vehicle shifted. The employee attempted to straighten the vehicle body and his left little finger was caught between it and the carrier pallet. He suffered an amputation to the fingertip.",0
An employee was struck by a forklift while walking behind a pallet. The employee suffered a broken hip.,1
"An employee was exiting a tractor trailer. He fell out of the trailer, landing on the ground about 4 or 5 feet below and suffering a broken hand.",1
"An employee tripped while walking through a doorway, suffering a compound fracture to the lower left leg.",1
"An employee fell from a height while dismantling racks. The employee suffered a broken hip and wrist, as well as facial injuries requiring stitches.",1
"An employee was washing out her concrete truck. Another truck started rolling toward the employee's truck, and she was caught between the two trucks. She suffered a leg injury and was hospitalized, requiring surgery.",1
"An employee was oiling a chain on a press machine. The employee noticed an oil drip and reached over with a rag to wipe up the oil. The chain caught the rag and pulled in the employee's hand, causing a degloving and fracture to one of the employee's fingertips. The fingertip was medically amputated.",0
"An employee tripped on a 4-inch step outside a building and fell to the concrete sidewalk, landing on her face. She suffered swelling and a bloody nose, and underwent surgery.",1
"An employee was cutting a piece of brass on a hydraulic shear. As the shear was cutting, it partially amputated his right thumb.",1
"Two employees were moving raw materials on a rolling cart. As they pushed the cart, its front wheels came in contact with a concrete joint in the floor. The weight of the cart shifted to the front, causing the load to become unstable and tip forward. One of the employees tried to keep the load from falling and was struck by the top bundle of material. The employee was caught between  the bundle and other material stacked near the cart, suffering a fractured pelvis and tailbone.",1
"An employee was reaching into a bagger head. A pneumatic clam gate closed on the employee's hand, pinching the middle fingertip and causing a possible amputation.",1
"An employee was cutting boards at the end of a production line with a suspended circular saw. The employee's hand contacted the saw when the board the employee was holding kicked back, resulting in a lacerated middle finger.",1
"An employee was using a scan gun to check products as they were loaded onto a truck. The employee went to close the roll-up door, and their glove got caught between the door and the truck. The tip of the employee's right ring finger was amputated.",0
"An employee was struck by a pallet, suffered a back injury, and was hospitalized.",1
"An employee was pulling tongs onto a pipe. As he placed his hand on the tong door handle, the door caught his right hand against the pipe. His middle and ring fingertips were amputated.",0
"An employee was trying to unclog a floor drain. He knelt down on his right knee and inserted the nozzle on a hose into the drain. When he opened the valve, water from the hose and drain (heated to 130-131 degrees Fahrenheit) splashed onto his left arm and into his right boot. He suffered a second-degree burn to the left forearm, right shin, and the top of the right foot.",1
An employee was setting up the forming roll of a tube mill. The employee's right middle fingertip was pinched between a steel tube and the forming mill. The fingertip was amputated.,0
An employee was guiding steel pipe into rollers using a bar. The top of his left hand contacted the hot pipe and was burned. He was hospitalized.,1
"An employee was walking along a walkway. The employee's left foot caught the base plate of a metal post, causing the employee to fall and suffer a broken left femur.",1
"A loader's forks were being used to push the door of a roll-off compactor box closed. The door pinched an employee's thumb, causing an amputation.",1
A slag pot broke loose as the hauler was moving toward the slag yard which fully engulfed the area in flames destroying the vehicle and injuring an employee. The injured employee suffered burns to the head and wrist and was hospitalized.,1
"An employee became entangled in computer wiring and fell off a desk, suffering a closed fracture/dislocation of the left shoulder girdle and a broken left tibia and fibula.",1
"A forklift backed into an employee, pinned the employee's ankle against a dump tub and breaking it.",1
A ski lift operator fell while skiing and suffered a broken hip. He was hospitalized.,1
"An employee was crossing a sloped, grassy area. She slipped on wet grass and mud and fell to the ground, suffering a broken left tibia and fibula. She was hospitalized and underwent surgery.",1
"An employee was washing the rear of a concrete mixing truck. A front loader backed into the employee, pinning the employee against the mixing truck. The employee suffered a broken pelvis.",1
"An employee was moving a trailer in a yard. The trailer bumped into an empty argon cylinder; as the employee attempted to prevent the cylinder from falling, his right hand was caught between the cylinder and trailer. His index finger was amputated.",1
"An employee removed the top wheel from a stack of cheese wheels on a pallet. The next couple of wheels fell against the employee's knee, dislocating the employee's kneecap.",1
An employee fell off the roof of an apartment building and suffered a broken leg.,1
"On March 17, 2022, an employee performing a work capacity test was walking with 45 lbs. of weight and began to feel discomfort in his chest resulting in hospitalization.",1
An employee tripped on a ladder leg and fell into a bookshelf. The employee suffered a broken left arm.,1
"An employee was performing blasting operations when his foot slipped. The blast nozzle contacted his abdominal and upper thigh area, and he suffered abrasions from the blast medium.",1
An employee was finishing a concrete floor on the second level of a building. The bull float pole he was working with touched an electrical line and he suffered burns to the left ankle.,1
An employee fell while stepping onto a shuttle bus. The employee was hospitalized.,1
"An employee fell from an industrial stairway, landing on the floor about 4 feet below. He suffered a concussion and head laceration, a broken finger on the left hand, and contusions to the right shoulder, right-side ribs, and abdomen.",1
An employee's left middle finger was crushed between a steel plant and magnetized equipment.,1
"An employee stepped in a low spot on an asphalt roadway and fell to the ground, suffering a broken leg.",1
"An employee was stepping down from a front end loader when he slipped and fell to the ground, suffering a broken hip.",1
"An employee was preparing to remove tin roofing from a shed. He fell to the ground, suffering a dislocated shoulder and an ankle injury.",1
An employee was helping an excavator push a log into the ground. The employee's hand was between the grapple and the top of the log when the grapple released the log. The grapple settled downward and crushed the employee's hand against the log. The employee was hospitalized.,1
"On March 17, 2022, an employee was riding a bicycle between maintenance locations. In maneuvering to avoid a pedestrian, the employee fell, landing on the floor and on a radio he had been carrying on his left side. He suffered a broken left hip.",1
An employee was walking through the warehouse and toward the exit when they were struck by a forklift. The employee sustained a severe foot injury that resulted in surgical amputation.,1
"An employee was using a motorized pallet jack. The employee fell off the pallet jack, which then ran over the employee's right foot and broke it.",1
An employee was clearing fish flakes from a processing line. A knife machine amputated his right middle finger.,0
"An employee was walking cows into a holding area. A gate closed on the employee and hit her in the head, knocking her to the ground. She suffered multiple head lacerations and a concussion.",1
A safe door closed on an employee's left index finger. The fingertip was amputated.,0
"The injured employee was trying to fix a dock plate while another employee held buttons to control it. The plate fell onto the injured employee's leg, breaking their left foot.",1
An employee was inspecting a roof for wind damage. The employee fell to the ground and suffered a fracture in the lower back.,1
"An employee was cleaning a work area. The employee fell while at the end of a staging area, landing 50-65 feet below and suffering a bruised lung, as well as a concussion.",1
"An employee was delivering a pizza to a residence. He tripped and fell down five  stairs, suffering facial fractures and broken teeth.",1
"An employee was operating a die pusher, a device that separated a die from the outer ring so the ring could be immediately reused. The employee's right ring finger was caught between the die spacer and the ring fixture, and the fingertip was partially amputated.",0
"An employee shut off an extruder to retrieve a stuck piece of material. As he moved to pull out the material, a blade in the extruder amputated one of his fingertips.",1
"An employee fell on a sidewalk, suffering a broken left knee and soft-tissue injuries to his wrists. He was hospitalized, requiring surgery for the knee.",1
An employee was replacing a valve on a condensate return pump. The employee came into contact with hot water and was burned.,1
"An employee fell approximately 4 feet, from a 10-foot ladder to the ground about 4 feet below. The employee suffered a head injury and was hospitalized.",1
An employee slipped and fell on ice in a parking lot. The employee suffered a blow to the back of the head and a cut on the elbow.,1
"An employee was moving tubing and chrome bar with a crane. The materials fell forward and struck the employee, who suffered fractures to both lower legs. The employee was hospitalized.",1
"An employee was spotting for a forklift as wooden 2-by-4's were stacked into a stand. The tip of a fork contacted a 2-by-4, causing it to shear off above a stake pocket and strike the employee in the head. The employee suffered a broken neck vertebra and was hospitalized.",1
"An employee was performing maintenance on a sheeter. He had pried up a steel access plate and was lifting it when it slipped and fell on his left middle finger. The finger was pinched against the floor, and part of the fingernail and fingertip was amputated.",0
An employee fell backward into an excavation that was 6-7 feet deep. The employee's ribs struck a hydraulic shore jack.,1
"On March 18, 2022, an employee was removing a broken-off piece of aluminum from inside a machine. A limit switch closed, the machine's carriage moved forward, and the employee's arm was caught between the carriage and the die face. The employee suffered a crushed hand and a broken arm and was hospitalized.",1
"An employee was stepping down off a chair when she fell to the floor, twisted her ankle, and suffered a broken back. She was hospitalized.",1
An employee was opening an overhead garage door before moving a fuel truck out of a building. The truck rolled forward and pinned him against the door. He suffered a compression injury to the chest.,1
"An employee was cleaning a bolt-making machine with a rag. The machine caught the rag and pulled in the employee's left hand, causing a fracture to the little finger and a partial amputation to the ring finger.",1
"An employee was trying to close a shipping container's door when it pushed back, striking him and knocking him to the ground. He suffered a broken hip.",1
An employee was working on a manure scraper pulley. The employee lifted the cover on the motor with the belt and pulley and grabbed the belt to check its tension. The motor turned on and the employee's finger was caught between the belt and the pulley. The employee's fingertip was amputated.,0
"At about 4:00 a.m. on March 19, 2022, an employee was using a long bar to unlock a chassis twist lock when he lost his balance and his head struck a railcar. He suffered a head injury.",1
"On March 19, 2022, an employee was working a 12-hour shift at an emergency room when, after 8 hours, she began to experience spasms in her right leg, down the thigh and to knee, and shortly after reported feeling her knee pop. The employee finished her shift. The next morning, the employee's knee was swollen and could not bend or bear weight. The employee was hospitalized.",1
"An employee was pushing a jammed pizza case down a conveyor system. The employee's left hand was caught between the case and the end stop of the conveyor; the employee suffered fractures and lacerations to the little, ring, and middle fingers.",1
"An employee was setting up an in-feed conveyor and pinched their left little finger between the extension arm and the locking mechanism, resulting in amputation of the pad of the left little finger and fracturing the distal phalanx.",0
"An employee was collecting shopping carts in a parking lot. A vehicle struck her left side, breaking her spine.",1
An employee was operating a boot turner machine. The machine amputated the employee's right middle fingertip at the nailbed.,0
An employee was preparing to lift a metal support plate off the ground. The plate slipped and the employee's left index finger was caught and crushed between the plate and a hammer. The employee suffered an amputation to the finger.,0
"An employee was on the surface of an ice rink when they slipped and fell, hitting their head on the ice.",1
An employee was turning to leave a register when her foot caught on a hand basket in the register's bag well. She tripped and fell and suffered a back injury.,1
"An employee was changing a lightbulb from a 12-foot A-frame ladder. When he leaned over, the ladder leaned with him and he fell, landing on a table and suffering head trauma and a broken jawbone.",1
"An employee was opening a hot tar kettle when the tar splashed the employee, causing second- and third-degree burns to the legs, face, and left arm.",1
"On March 20, 2022, an employee was driving a forklift in reverse when his left leg was caught between the forklift and a steel box. The leg was broken.",1
"An employee was lifting a 16-pound box of limes from the top of a product pallet to put it on a shelf. He pulled his left shoulder and was hospitalized, suffering from a collapsed lung.",1
"An employee was jumping across the trampolines at a trampoline park. He fell and suffered a compound fracture to the left leg. He was hospitalized, requiring surgery.",1
"On March 20, 2022, an employee was air-cleaning a transfer belt from a two-step ladder. He fell off the step ladder to the floor about 2 feet below, suffering broken ribs. He was hospitalized.",1
"An employee fell off a truck loading dock to the ground almost 4 feet below, suffering an injury to the left knee.",1
"An employee was standing on the top of a garbage compactor trying to unclog a trash chute. He fell against the chute opening, hitting its metal edge and suffering three broken ribs and a collapsed lung.",1
"On March 20, 2022, three employees were installing a small cylinder on a roll stand machine. They were attempting to install the pin that secured the cylinder. The cylinder dropped while one employee's right index finger was in the pinhole of the roll stand machine and partially inside the eye hole on the end of the cylinder. This created a shear point that amputated the employee's fingertip.",0
"An employee tripped over a stationary bench and fell to the ground, suffering a hip injury that required surgery.",1
"Two employees were trying to close a hopper after clearing a blockage. The hopper still had some dough in it, which made it difficult to close. An employee was pulling on the hopper when it was pushed from the other side, and it pinched the employee's left thumb. The employee suffered a soft-tissue amputation to the underside of the thumb.",1
"An employee fell from the upper deck of a drop-deck trailer, landing on the ground on his left side. He suffered arm, rib, and pelvis fractures.",1
An employee was removing a lid when residual pressure ejected it into the employee's face. The employee suffered a laceration to the face and nose.,1
"An employee fell off a garage roof, landing on the ground and suffering a broken hand and ankle. The employee was hospitalized.",1
An employee was skiing down a ski route when he struck a tree. He was hospitalized for an abdominal injury.,1
"An employee was opening a truck gate when he slipped, suffering a dislocated left knee.",1
An employee was transferring trash from bins to a dumpster. The employee lifted a trash bin to dump into the dumpster when their middle finger was caught between the bin and the dumpster rim. The finger was amputated.,1
"At 3:15 p.m. on March 21, 2022, an employee stepped into an 8-inch-by-14-inch opening above a running feed transfer auger. The auger caught his foot and pulled him in. His left leg was amputated.",1
"At 3:23 p.m. on March 21, 2022, an employee was returning to her workstation when she tripped over a plastic band with her left foot, suffered a broken right femur as she tried to regain her balance, and collapsed to the floor. She was hospitalized.",1
"On March 21, 2022, an employee was using a carpenter's knife to cut plastic. The knife amputated the tip of the employee's left middle finger.",0
An employee was moving to set down a nail gun he had been using when it shot a nail into his right knee. He was hospitalized and underwent surgery to remove the nail.,1
An employee was operating a machine that cools and smokes sausage. The employee was in the process of removing sausage which had jammed in the conveyor system of the machine when their left middle finger got caught between the belt and the pully resulting in a fingertip amputation.,0
An employee was moving some pieces of a scaffold wall climbing system. A clamp caught his right thumb and fractured it. He was hospitalized.,1
An employee was hospitalized after being exposed to airborne contaminants associated with a faulty clothes dryer.,1
An employee was training another employee on a vacuum. The injured employee suffered a fingertip amputation while he was holding a vacuum pump to feel for vibrations.,1
"An employee was positioning a piece of aluminum in a mechanical ""stomp"" shear. The machine cycled with his left hand in its point of operation and partially amputated his middle finger.",0
An employee was putting a mold lifting cylinder on a chain fall hoist. The cylinder shifted and pinched the employee's left index finger against its mounting bracket. The fingertip was amputated.,1
"An employee was pushing two equipment trolleys. As she pushed the carts through a door, her foot got caught under the door and she fell. She landed on her right side, suffering injuries to the right foot and hip.",1
"An employee was on scaffolding using a miter saw on a stand to cut wood. The stand moved and pulled the employee's left hand into the blade, resulting in a little finger amputation.",0
An employee was handling a board when a 1-inch sliver of wood punctured his protective glove and embedded itself in the webbing of skin between his left index finger and thumb. He was hospitalized.,1
"An employee was sanding a metal fixture with a disk sander. The employee's left hand contacted the sander, which partially amputated the thumb.",0
"An employee was spotting for a forklift. Rebar fell off the forks and hit the employee's leg, causing a fracture. The employee was hospitalized.",1
"A temporary employee was carrying out housekeeping duties at a construction site. A fire at the electrical panel lit the employee's pants on fire, and the employee suffered second-degree burns to the knees.",1
An employee was removing a part from a bending machine. The machine clamp amputated the bottom tip of the employee's right little finger.,0
An employee was moving aluminum sheets. The sheets fell and pinned the employee's right foot against a material carriage. The foot was fractured and lacerated.,1
"At 10:10 a.m. on March 21, 2022, an employee was loading bubble wrap onto a flatbed truck from a dock. The employee fell between the truck and the dock, landing on the concrete pad below and suffering a thoracic spinal fracture.",1
"An employee was moving four machine parts (weighing about 88 pounds each) with an overhead crane. The load shifted and the middle two parts dropped down, amputating the tip of his left middle finger.",1
"An employee slipped and fell on the floor, suffering a broken femur.",1
"An employee was standing on a two-step step stool, installing shelf brackets on a wall. The employee fell off the stool to the floor and suffered a broken left ankle.",1
"An employee was loading a lift gate under the bumper of a truck. The employee's left hand was caught between the gate and the truck body, and the employee suffered an amputation to the middle finger.",0
"An employee was trying to secure an 8- to 10-inch-thick, 40-foot-long pipe to a trailer. The pipe began to roll. The employee fell from the trailer while trying to stop the pipe's motion; the pipe then fell onto the employee's thigh and broke the employee's leg.",1
"An employee was loading quartz slabs onto a truck. While lowering the slabs to the floor to adjust the straps, he tripped and fell. One of the slabs fell onto his right arm and broke it.",1
A pickup truck backed onto an employee in a parking lot. The employee suffered an injury to the abdomen and back.,1
"An employee was helping retrieve a wind-damaged sign. The sign was in the bed of a pickup truck, with the employee holding it down, when a gust of wind picked it up. The sign fall back onto his finger and dislocated it.",1
"An employee was blasting parts with aluminum oxide using a blast hood. While blasting, the rubber gasket on the blast hood became loose. The employee attempted to seal the gasket in place with duct tape and continued blasting. The employee suffered erythema and ruptured capillaries.",1
"At about 2:05 p.m. on March 22, 2022, an employee fell while walking through a bakery department. Her head struck the floor and she was hospitalized.",1
"On March 22, 2022, an employee stepped off a pallet jack, which pinned his lower leg against a rack. He suffered an open fracture to the lower leg.",1
An employee was tripping out pipe using a workover rig. The blocks were coming down with the elevators and the employee was pulling down on the ears when his left index finger was caught between the ears and the pipe. The finger was amputated.,0
An employee fell out of a moving postal vehicle as it pulled onto a roadway. The employee suffered broken facial bones and a broken hip.,1
An employee was moving boxes down stairs. He dislocated his left knee on the last step.,1
"An employee was driving a pallet jack down an aisle. Another pallet jack was about to strike his own, so he jumped off. His pallet jack then ran over his right ankle. He suffered a ruptured Achilles tendon that required surgery.",1
"An employee was fixing a bed. The bed frame fell onto the employee's thumb, causing a fracture and a cut.",1
"An employee was pulling an empty hand jack into a warehouse. While the employee was turning to push the button to open the garage door, the employee's foot slipped and their ankle rolled. The employee fell and suffered broken bones in the foot and was hospitalized, requiring surgery.",1
An employee was removing debris from a grinder when the grinder's blade amputated his right index finger. The machine was not locked out at the time.,1
"An employee was installing a diffuser in a blower on a lift table. The lift table's shaft got stuck; the employee was checking the air system when the table released and moved, crushing the employee's right ring finger against the blower. The employee underwent a medical amputation to the finger.",0
"An employee was removing a section of a concrete wall. The wall fell over onto the employee's right leg, breaking the knee.",1
"An employee was opening the rear door of a cargo trailer. A 500-pound bale of fiber fell out of the trailer and knocked the employee to the ground. He suffered fractures to vertebrae, an arm, and a leg.",1
"An employee was doing maintenance work in a tunnel under a production line. The employee fell approximately 9 feet through an open manhole, landed on the concrete level below, and suffered neck and back injuries.",1
"On March 22, 2022, an employee was clearing backed-up sample carpet squares from under a conveyor belt. A guillotine blade amputated the employee's left middle fingertip.",0
"At 6:55 a.m. on March 22, 2022, an employee fell off a stack of pallets in a walk-in cooler. The employee suffered a broken right leg and was hospitalized, requiring surgery.",1
"Employees were moving a trailer frame. The frame's front and back had been raised with dollies. Four employees were in the back, pushing the trailer forward, when the back end of the trailer came in contact with a piece of angle iron steel in the floor and the dolly came to an abrupt stop. The weight of the trailer overcame the dolly and an employee was pinned between the dolly and the back (ramp) of the trailer. He suffered a collapsed left lung and was hospitalized.",1
"An employee stepped on a metal grating covering a U-drain with green liquor, a liquid chemical. The grating tilted, causing the employee's right leg to fall into the liquid. The employee suffered chemical burns to the lower leg and foot.",1
An employee was loading a large sliding glass door onto his truck at a vendor location. The door fell off the loading cart and struck the employee resulting in fractured ribs and a laceration above his eye.,1
"At 9:00 a.m. on March 22, 2022, an employee was pressure washing the inside of a liquid tanker trailer to remove lime slurry (sludge). The employee had nearly finished cleaning sludge from inside the tanker trailer and reached into the lower drain valve opening with their left hand to manually push lime slurry through the valve. While pushing lime slurry through the valve, the valve unexpectedly closed on their left middle and ring fingers causing the loss of skin on their middle finger and immediate amputation of the ring fingertip.",0
"An employee cut into a hollow rod that was filled with fluid pressure, which caused a bar to flip and hit the employee's left arm. The employee's forearm was broken.",1
"An employee was using a lift to raise a pump. His finger was caught between the pump and the chain hook, and the fingertip was amputated.",0
"An employee was operating a punch press. As the employee adjusted the position of material in the press, the foot pedal was actuated and the press came down on the employee's left index finger, resulting in a fingertip amputation.",0
An employee was assisting a patient back into bed for the night by lifting the patient's legs from the floor to the bed when she experienced discomfort in her back due to a lower-to mid back strain and sprain.,1
An employee was operating a scissor lift when it backed into a pit and overturned. The employee sustained a broken leg and hip.,1
"An employee was loading parts in and out of a brake press, which required a hand wand to remove parts after bending the parts to the table. The employee was wearing pullbacks and gloves while cycling the press. The employee reached toward the part for proper placement. The pullbacks stopped the employee's hand, but the metal part hit the employee's middle finger, resulting in a partial amputation.",0
An employee was cutting cardboard with a shearing machine. The machine partially amputated the employee's right middle finger.,1
"Two employees were repairing a slide gate at a feed mill. They were in a scissor lift extended to about 21 feet. A weigh lorry struck the lift and knocked it over. One of the employees fell to the ground along with the lift and suffered a broken right heel, as well as a concussion. The other employee did not sustain injury.",1
"At about 11:30 a.m. on March 22, 2022, an employee was helping set a precast retaining wall panel in place. While trying to stop the wall from moving, the employee suffered an injury to the right bicep. The employee was hospitalized.",1
"An employee was working on a landing door in an elevator pit. An upper panel on a bi-parting freight landing door struck the employee, who suffered a bruised spine and a broken right wrist.",1
A temporary employee was on a ladder installing soffit and fell approximately 9 feet to the ground. The employee suffered contusions and abrasions and was hospitalized.,1
"An employee was standing on top of some concrete blocks, cleaning out a truck drum. The employee tripped on a hose and fell to the ground 3 feet 7 inches below, suffering a torn tendon in the right knee.",1
"An employee was stocking sunglasses in a display. The employee's knee and foot caught on the display, causing the employee to fall to the floor and suffer a broken hip.",1
"An employee was greasing equipment when it fell, striking the employee's left leg and breaking it.",1
An employee was working behind the platform cutting and placing romaine lettuce heads on a table. A plastic bag used to package the lettuce flew up into a conveyor belt toward one of the rollers. The employee went to grab the bag and the belt caught the sleeve of his shirt pulling his right arm into the machine and around the roller. The employee suffered fractures and lacerations that required surgery.,1
"A crew was drilling to take soil samples using a truck-mounted auger. An employee, working for Braun Intertec, was pulled into the auger and suffered multiple fractures to both arms, the left shoulder, and the collarbone. The employee was hospitalized.",1
"An employee was picking up a box of products. A kitchen knife was protruding from the box. The knife made contact with the employee's knee, resulting in a laceration that required surgery.",1
"An employee was gathering items in a bakery freezer. She tripped and fell, suffering a broken right leg.",1
An employee was trying to line up a metal plate while it was being hammered. The employee was struck by a sledgehammer and suffered an injury to the left ring fingertip.,1
An employee was walking into a cabin when a gust of wind blew the door shut. The employee's right index fingertip was caught in the door and amputated at the first knuckle.,0
"An employee was pressure washing a truck when they tripped over the hose and fell, resulting in a broken left ankle that required surgery.",1
"An employee was climbing down a two-section fiberglass ladder when he fell, landing on the ground 12-15 below and suffering head and arm injuries.",1
"At 3:29 p.m. on March 22, 2022, an employee fell while stepping off a truck, landing on the ground and suffering a broken femur.",1
An employee was standing on a 3- or 4-foot table tapping a part. The employee was walking backward and fell off the table to the floor and suffered a head injury.,1
"An employee was manually jogging recoil steel on a recoiler machine when his left hand was caught in a pinch point, resulting in partial amputation of his thumb.",0
An employee was operating a forklift inside a trailer. The employee backed into a parked forklift and one of its forks impaled his left foot. He suffered a fracture and tissue damage to the foot.,1
"An employee was unpacking a shipment of 2.5-liter bottles of nitric acid in a 70% solution. A bottle struck a countertop and broke, and the nitric acid burned the employee's left hand and legs.",1
An employee was moving hanging product racks. One of the racks fell from the rail and struck the employee.,1
An employee was cleaning a meat grinder. The machine activated and the spinning worm drive auger amputated his right ring finger at the first knuckle.,0
"On 3/23/2022, at approximately 7:15 a.m., an employee was operating a CNC machine and was struck by a machine bit when it was thrown out of the CNC machine. The employee sustained internal injuries.",1
"An employee was lifting a steel train wheel. The lifting tong caught the employee's left ring finger, resulting in amputation at the first knuckle.",1
"An employee was installing a racking system for pallets. A horizontal brace came loose, causing him to fall from the second tier of the shelving rack to the concrete floor. His feet were broken.",1
An employee was using a bandsaw to cut meat and amputated their left middle fingertip.,0
"On March 23, 2022, an employee was operating a brake press. The employee's finger was caught between the rear gauge and the bottom die, and the fingertip was amputated.",0
An employee was using a magnetic attachment on a crane to lift a container plate onto a trailer. The magnet shifted and pinched the top of the employee's finger. The employee suffered an amputation to the fingertip.,0
A solar installer fell from a roof to the ground and broke both heels.,1
An employee was operating the packer on a garbage truck. His left middle finger was crushed and amputated between the packer blade and the side panel of the truck.,1
"An employee of AAA was helping move a car toward a tow truck down a small hill. The car rolled away from him, and as he tried to stop it his leg was pinned between its door and another car. He suffered a leg injury and was hospitalized.",1
An employee was getting ready to work with a hydraulic drill. The employee was adding a section to the auger when it turned and cut his left middle and ring fingers. The middle fingertip was amputated and the ring finger was lacerated.,0
"An employee was rigging a load to be lifted by a tower crane at a construction site. When the crane lifted the load, his left ring finger was caught between the load and the rigging and amputated.",0
"An employee fell from the top of a trailer loaded with bundles of tubes. He landed on the concrete walking surface 61 inches below, breaking two ribs and suffering shoulder, back, and lung injuries.",1
An employee was removing a panel from a vehicle using a clip removal tool. The tool bounced off the vehicle door and punctured the employee's left eye.,1
An employee was climbing down a scaffold ladder. He fell to the concrete below and suffered a broken right femur.,1
"An employee was walking in the breakroom when they tripped over a chair and fell to the ground, resulting in a neck injury that required hospitalization.",1
An employee was breaking up two children who were arguing. One child threw a chair which struck the employee on the right side of her face. The employee later suffered a seizure and was hospitalized.,1
"An employee was operating a stand-up forklift. The employee's left hand was caught between the forklift and some racks, and the thumb was amputated.",0
"A crew was removing a storm-damaged tree. An employee, working in the tree, rigged down a limb. When the limb's branches hit the ground, the limb sprang back towards the employee and struck his right leg, pushing it into the tree trunk. He suffered an open fracture to the tibia.",1
"On March 23, 2022, an employee was holding a door when a foot-actuated clamp was engaged. The clamp caught the employee's left hand, resulting in an amputation of the middle finger.",0
"An employee was loading cardboard into a compactor. The compactor's safety door dropped onto his right hand, amputating the tip of his index finger.",0
"An employee was removing a mold from a press. The press activated and crushed his left ring finger, causing an amputation to the finger.",0
"During a core sampling operation, an employee's right index finger was pinched between slip bowls and the drill pipe. The finger was amputated.",1
An employee was operating an electric pallet jack. He struck a stationary forklift and suffered a broken left leg.,1
"Two employees were dumping obsolete glass inventory. They were working with a wooden crate of glass, held together by bands, on a fork truck. While one employee was cutting the bands, the release of tension caused the package to come down on the other employee's little finger, amputating the fingertip.",1
An employee was operating a chop saw. The employee's right thumb was amputated.,0
"An employee was feeding brush into a wood chipper. A climbing rope was tangled in the brush. It was drawn into the wood chipper and struck the worker, causing him to be thrown into the curbside guard panel of the machine. He suffered abrasions across the upper back, a broken left humerus (at the elbow), broken ribs, a diaphragmatic hernia, and a bruised and lacerated kidney. He was hospitalized.",1
"An employee was in a bucket installing a fiber optic line. An insulator 4 feet above the employee broke, causing the primary electric line to come loose and fall on him. He suffered third-degree electrical burns to the back, chest, arms, and hands. He was hospitalized.",1
"On March 24, 2022, an employee was load-testing an air dryer when the muffler failed and flew apart. It struck the employee in the head, causing three facial fractures. The employee was hospitalized.",1
"An employee was climbing down a ladder when he fell, landing on the floor and suffering an injury to the left hip.",1
"A temporary employee had climbed a ladder to clear a box jam on a conveyor belt. While climbing back down the ladder, he fell at the fourth rung, landing about 4 feet below and suffering a broken hip.",1
"On March 24, 2022, an employee was operating a powered saw. The employee's left thumb was pinched in a vise clamp that held the stock in place to be cut. The thumb tip was amputated.",0
"An employee was climbing a truck ladder to mount a truck. The employee fell off the ladder to the ground about 3 feet below, suffering contusions and fractures to his arm.",1
An employee was adding alloy to a furnace. Slag and flames left the furnace and burned the employee's upper body.,1
An employee was holding square tubing in place while another employee used a sledgehammer to hammer it. The employee was trying to straighten up the tubing when the sledgehammer smashed his thumb. He was hospitalized and underwent a medical amputation to the thumb tip.,1
"An employee stood up from a desk, tripped over another employee's foot, and fell, suffering a broken wrist. She was hospitalized.",1
"On March 23, 2022, an employee was on an 8-foot A-frame ladder, attaching a rubber boot around a switch at a switch gear when the 13.8-kV system energized. He was shocked and fell about 3.5 feet to the ground. He suffered a burn to the upper thigh and bruising to his back and hips from the fall.",1
An employee suffered chemical burns to the hands after washing dishes in a sink containing grill/oven cleaner.,1
"An employee was trying to break a piece of quarter-inch plywood for disposal in a metal dumpster. He propped the piece of plywood against the side of the dumpster and stepped on it. When the plywood snapped, he lost balance and fell striking his head against the side of the metal dumpster, suffering a neck injury and a possible concussion.",1
"An employee was accessing a 277-volt junction box. One circuit in the box had been shut off, but a second circuit shocked the employee, causing burns and lacerations to the employee's hands. The employee was hospitalized.",1
An employee was using a spiral slicer. The blade contacted the employee's thumb and amputated the tip.,0
"An employee was climbing a scaffold. He fell at about 7-10 feet up, landing on concrete and suffering a broken hip.",1
An employee was taking boxes off a conveyor belt. The employee's hand was pulled in by a tension roller under the belt. Three of the employee's fingers were crushed and the employee was hospitalized.,1
An employee was working near a fryer. The employee suffered a second-degree burn to the forearm from the hot oil.,1
"Two employees were using a water hose to unclog a heart and liver separator machine. The machine was turned on while one employee's hand was inside it, and an auger under it amputated the tip of his right index finger. He was hospitalized.",0
"An employee was trying to resolve an issue during a setup operation. A piece of coil steel moved, severely lacerating the employee's left middle finger and amputating the employee's right middle finger at the second knuckle.",0
"An employee was using a box cutter to open construction material. The box cutter lacerated his arm and he was hospitalized, requiring surgery.",1
"After a five-hour shift washing dishes, an employee developed pain, irritation, and extreme reddening in the hands. He was hospitalized.",1
An employee was hosing down a screw conveyor. The conveyor caught and injured his hand.,1
"An employee was assisting a forklift operator with loading a truck and placing chocks on the wood boards for loading. While the forklift operator lifted a pipe, a group of pipes rolled back in place, but a single metal pipe was held at the tip of the forks and slipped out of place. The pipe fell on the floor and bounced toward the employee, striking and crushing his left foot and leg, which resulted in fractures.",1
"An employee was straightening a bag on a bagger machine when her right hand was caught in the door. She suffered crushing injuries to the hand and wrist, as well as a broken little finger, and was hospitalized.",1
"An employee was flipping a piece of channel iron. The employee's left little finger was pinched under the channel iron, and the fingertip was amputated.",0
"An employee was working on a non-energized power pole that had new wire strung on it the previous day. While he was removing a traveler that was in his way, he came into contact with the adjacent 7,200-volt live line. He was shocked, briefly losing consciousness and suffering entry and exit burns to the right thumb, right middle finger, left thumb, and left index finger. He was hospitalized, requiring skin grafts.",1
"An employee was fire-watching for a crew doing hot work in a panel assembly department. While trying to clear the way for a forklift, he tripped over a 1.5-inch fire hose and fell to the concrete floor, suffering a laceration to the right eye with some vision loss. He was hospitalized.",1
"An employee was driving a pallet jack when it clipped the corner of a pallet stack. He fell backward off the pallet jack and suffered contusions to the head, back and shoulders.",1
"On March 24, 2022, an employee was bead-blasting metal bases. As he was holding up a piece of material to blast it, the sprayer jerked and the impact beads abraded his left wrist.",1
"An employee fell on a kitchen floor, landing on her left side and suffering injuries to her left hip.",1
"An employee was walking around a cash register. The employee slipped on a carrot and fell to the floor, suffering a broken hip.",1
An employee was doing flashing work on a roof. The employee fell from the roof to the ground level about 20 feet below and was injured.,1
An employee was operating a bandsaw during a pallet disassembly. A kickback caused the employee to be pulled into the bandsaw and suffer multiple finger amputations.,1
"An employee was standing on top of a plastic pipe rack, helping another employee put pipes into the rack. The pipes were being lowered by a forklift, and as the two employees were trying to get them unstrapped the forklift boom struck the first employee's toe. The toe was broken and the bottom of it was medically amputated.",1
"An employee was changing a bit on a CNC router. When he reached under the machine, the still-spinning bit cut and lacerated his left hand in several places, from the palm to the thumb.",1
"An employee slipped on a wet floor and fell, suffering a broken hip.",1
"An employee was opening up the tailgate to a dump truck. His hand was caught by the metal piece that holds the door in place. He was hospitalized, undergoing surgery to the little finger.",1
"An employee was driving a motorized pallet jack down a docking ramp. He had to stop abruptly to avoid striking another machine that was driving up, and he fell off the pallet jack and broke his ankle.",1
"An employee was cleaning up scrap material that had fallen off a conveyor belt. The employee bumped into a machine guard, which became unhinged and swung down onto the employee. The employee suffered internal bleeding.",1
"An employee was on the catwalk of a paver, trying to dismount on the right side, when he was struck by an oncoming truck. He suffered burns (from hot asphalt) to both palms, the right elbow, the upper right temple, and the right ear, as well as lacerations to the right eye and the liver.",1
"An employee fell while walking down a hallway, striking a wall and the floor and suffering a broken right hip.",1
"A driver fell off the lift gate of his truck while making a delivery. He landed on the ground and suffered injuries to his right hip, leg, and arm.",1
An employee was repairing a forklift tire when it ruptured. The rim dislodged and struck the employee in the face.,1
"An employee was using a fryer. Noticing that the oil level had exceeded the fill line on the fryer, the employee began removing oil with a paper soup cup, then disposing of it in a bucket. After removing several cups of oil, the employee poured cold water into the bucket. The oil reacted with the water and erupted, burning the employee's face, neck, chest, left arm, and left foot.",1
"An employee was using a hoist to load products from a tote into a hopper. The chain on the hoist fell, and the tote trapped his left hand against the hopper. The hand was injured and he was hospitalized.",1
"On March 25, 2022, an employee had just detached a string of empty rail cars away from some loaded cars. The string of detached cars was being taken ahead, and the employee began pulling the knuckle of a rail car into the open position. The string of detached cars then momentarily came back, and the employee was pinched between two cars. The employee suffered a broken right hip and was hospitalized.",1
"At 6:30 p.m. on March 26, 2022, an employee was leaving a building through a heavy door. As the door swung open, the momentum of pushing it open caused the employee to fall and suffer a pelvic fracture. The employee was hospitalized.",1
"An employee entered a cooler through a hinged swing door to erase a whiteboard. While the employee was reaching to erase the board, the door closed on the employee's left ring finger and amputated the tip.",0
"An employee was standing on the passenger side of a powered industrial truck speaking to the operator. At the end of the conversation, the truck drove off and its right rear tire crushed the employee's left calf. The employee suffered a crushed ankle and skin damage to the calf.",1
"An employee was making his way down off a roof he had just inspected. He lost his balance and slid off the edge of the roof, landing 16 to 18 feet below and suffering fractures to both legs and the left arm, as well as hip injuries. He was hospitalized.",1
"An employee was traveling backward on a walkie stacker forklift to the back of an aisle when the forklift collided with a parked turret machine. The employee contacted the forks attached to the side of the turret machine, resulting in a broken left leg.",1
"An employee fell backward out of the back of a van, hitting the back of his head and suffering a concussion.",1
"An employee was troubleshooting the crimper action of a machine that made press paperboard cylindrical containers. As he passed a photo eye in an interlock gate area, the machine cycled and the indexing arm struck him on the head/face, crushing him against the chuck. He suffered a broken jaw, loss of teeth, and injuries to the back of the neck and head.",1
"On March 25, 2022, an employee was preparing to install a new service at a residential home. The employee set up a ladder with retractable hooks and as he was climbing the ladder it started to slide causing the employee to fall to the ground with the ladder. The employee fractured their wrist and ankle and was hospitalized.",1
An employee was rigging a hydraulic hoist. The elevator moved up and caused the employee to lose their footing. The employee fell to the same level and suffered a broken ankle and two broken ribs and was hospitalized.,1
"An employee was closing the manual part of a truck lift gate. The powered part of the gate actuated, and the employee's fingers were crushed. The employee was hospitalized, requiring surgery.",1
"After preparing a mold for a pour in an aluminum foundry, an employee exited the mold and came into contact with an open flame that ignited his shirt. He suffered second- and third-degree burns to the back and was hospitalized.",1
"An employee was holding a connection point handle while hooking up two semi-trailers when his hand got caught between the hookup point and the pintle, resulting in a thumb amputation.",0
A temporary employee was cleaning a pineapple cutting machine. The machine amputated the employee's left index finger.,1
"An employee was checking for air leaks in a vacuum system after the vacuum pump had been removed from the airlock rotary valve. The employee slipped on water, fell to one knee, and grabbed the airlock to steady himself. His left middle finger contacted the moving vanes inside the rotary valve, causing a fingertip amputation. He was hospitalized. The airlock was not locked out at the time of the incident.",1
An employee was performing security at a softball game when a fly ball hit a fence near the employee and a fence post fell onto the employee's head causing a concussion.,1
"An employee fell on a 10-inch stair at the exit to an office. He fell to the floor, suffering a broken right femur. He was hospitalized.",1
"An employee was using a cable winch to position a log. The tongs slipped off the log, and his right middle finger was crushed between the log and the chain, resulting in a partial amputation.",0
"An employee was picking up signs in a roadway work zone. A car struck the employee, who suffered several broken bones.",1
An employee was pulling steel coils down a conveyor line and amputated their right thumb tip.,1
An employee was packing a 55-gallon drum when a flash fire occurred. The employee was burned on the head.,1
An employee was removing a switchboard on a panel when an arc flash occurred. The employee was hospitalized with first degree burns to the face and second degree burns to the hands.,1
"An employee was operating a straddle carrier when they drove over a pothole, resulting in lower back pain due to a slipped disk.",1
"An employee was driving a utility terrain vehicle. The vehicle flipped onto its side during a turn, and the employee's lower left leg was broken.",1
"On March 26, 2022, an employee was walking in front of a planting machine when the machine caught him. He fell to the ground, and his left foot was caught under a floating tire. The employee suffered a sprained left ankle.",1
"An employee was sanding a part on a lathe. The sandpaper caught his gloves, and the rotating lathe amputated two fingers on his right hand.",1
An employee was using a scissor lift table to pack composites. The table crushed her right foot as it came down. One toe was amputated and another was partially amputated.,0
"An employee was working from an aerial lift, about 20 feet in the air, when he contacted an electrical wire and suffered severe burns.",1
"An employee was moving a 250-gallon tote of sodium hydroxide with a forklift. When the employee lifted the tote, the load shifted and fell forward into the building. The employee was attempting to pick up the lid that had fallen off of the tote when they were splashed with sodium hydroxide, resulting in chemical burns on their left scapula and the back of their left arm.",1
"An employee lost balance and fell in a parking lot, landing on the ground and suffering a head laceration and a broken arm.",1
"An employee's foot got caught in pulse oximeter cables as she walked away from a delivery table. She tried to catch herself on the table, but it moved out of the way and she fell to the floor shoulder first. Both her arms were broken.",1
"An employee walked through the main entrance when he noticed the rug at the entrance was rolled up in order to bring out pallets of firewood. He attempted to put the rug back when he tripped on the rug, fell onto his right side, and was unable to move his right leg. The employee suffered a break in the ball of his hip joint.",1
The injured employee was following another employee through a door. The closing door caught and amputated the injured employee's fingertip.,0
An employee was erecting a pre-fabricated structure on the owner's property and was walking across the steel beam side support structure to secure metal trusses with an electric drill with a socket head when he slipped and fell 14 feet to the concrete slab below. The employee sustained a broken hip.,1
"An employee was cleaning up an area. The employee slipped on the floor, wet from steam, and suffered a broken right leg.",1
"An employee was pushing a resident in a wheelchair out of a dining room when she tripped and fell on her left side, breaking her left hip. She was hospitalized, requiring surgery.",1
An employee had rigged a load of metal to be moved with a crane. The rigging failed when the load was about 10-15 feet in the air; the load dropped onto the employee's head and neck.,1
An employee fell 36 feet from a 3/12 metal shed roof onto the ground. The employee sustained broken bones.,1
"An employee was checking belt tension in a machine. A roller caught the employee's finger, causing a fingertip amputation.",0
"At 2:00 p.m. on March 28, 2022, an employee using a radial arm saw to cut boards when it amputated part of his left index finger.",0
"An employee was pulling a slab of wood across a roller bed. The roller bed caught the employee's shirt, then the employee's fingers. The employee's left ring finger was partially amputated.",0
"Part of an automated conveyor track had become unaligned and four employees were troubleshooting the problem. One of them climbed onto the conveyor belt (about 2 1/2 feet above ground level) and braced himself on a guard cable (about 2 feet above the conveyor, aligned with the side of the belt) while sitting on another guard cable (about 1 foot above the conveyor belt). Both cables failed while the employee was trying to manipulate the conveyor with his legs/feet. He fell to the floor, striking his head and suffering two skull fractures and a brain bleed.",1
"A crane was moving metal beams from a conveyor. The crane did not activate the sensor on the conveyor, prompting an employee to pull on the metal beam. The employee's right ring finger was caught between the metal beam and the metal rod. The finger was amputated.",0
"An employee was directing a tractor trailer as it backed into a loading dock. The trailer struck and injured the employee, who was hospitalized and underwent surgery.",1
"An employee was driving a stand-up forklift to a charging station. The forklift struck the racking in the aisle, and the employee's left foot was pinned between the forklift and the racking. Two of the employee's toes were amputated.",0
An employee fell about 6 3/4 inches while descending a step. He suffered a broken tibia and was hospitalized.,1
"An employee was at a customer location while delivering packages. The rear roll-up door of the delivery van began to close when the employee's right index finger got caught between two of the panels, resulting in amputation of the nail and fingertip.",0
An employee was pinned between a forklift and the bed of a truck. The employee suffered a broken pelvis.,1
"An employee was walking on a rig deck. A cap failed when the employee stepped on it, and the employee's leg entered the hole. The employee suffered lacerations to the upper rear thigh.",1
An employee was pushing carts into a corral. The employee tripped over a floor mat and suffered a broken right knee. The employee was hospitalized.,1
"At about 5:45 a.m. on March 28, 2022, an employee was troubleshooting an ear welder when its pneumatic ram activated. His right middle finger was pinched between two electrodes on the welder, resulting in a partial amputation.",0
"An employee was slicing turkey on a deli slicer. The slicer blade lacerated his left index fingertip, causing a fingertip amputation.",0
An employee was troubleshooting a door switch and motor on a variable frequency drive. An arc flash burned the employee's left hand. He was hospitalized.,1
An employee was trying to unclog a machine and partially amputated their left index finger.,0
"An employee was cleaning spilled glue from a concrete floor. He mopped a thin layer of water over small areas of the hardened glue to help thin it. A few minutes later, he slipped on the floor and fell. He landed on a tape measure clipped to his right hip and suffered a femoral neck fracture that required surgery.",1
"An employee was delivering lumber at a construction site. A vehicle backed into the employee, who suffered internal bleeding, a dislocated hip, and possible broken bones.",1
"An employee slipped on an accessibility ramp, fell, and suffered broken ribs. The employee was hospitalized.",1
"An employee was attacked by two dogs while delivering residential mail. She was bitten on the left forearm and right hand, and was hospitalized.",1
"An employee was walking down a staircase. He fell down the last 10-12 steps of the flight, suffering three rib fractures, a left lung puncture, and blood accumulation in the left lung. He was hospitalized.",1
"An employee fell on the floor inside a trailer, breaking her left arm.",1
An employee was trying to replace a conveyor belt when it amputated the tips of the employee's left middle and ring fingers. The belt was not locked/tagged out at the time.,0
An employee was climbing a dump truck when he fell to the ground and suffered a broken ankle.,1
"An employee fell from a ladder, resulting in fractures and multiple internal injuries that required hospitalization.",1
"An employee was riding a bicycle in a basement hallway. He stood up to get leverage and his head struck a steam pipe, which knocked him to the ground. He was hospitalized for a concussion and bruising of the spinal column.",1
An employee was moving an electrical part from a pallet to a table. He stepped on the pallet and tripped and fell to the ground. The part landed on his left hand and caused a partial amputation of the ring finger.,0
"On March 28, 2022, an employee was on a 4-foot platform spraying concrete finisher. The employee fell backward off the platform to the floor, suffering a broken right knee.",1
An employee was using a circular saw to cut aluminum grating. The saw caught and injured his left forearm. The arm was medically amputated.,1
An employee was trying to throw a toilet into a dumpster. The toilet fell back and lacerated the employee's arm. He was hospitalized.,1
"An employee was pulling wire out of a storage tube. The employee slipped on the wire and fell to the concrete floor, suffering a broken right femoral head.",1
"An employee was walking toward a pump on which he was installing a new suction manifold. He tripped over the old manifold, lying on the ground, and fell. He suffered a compound fracture to the left forearm and was hospitalized.",1
"An employee was preparing a stiff-leg pipe for installation on an overhead crane. The pipe fell and struck the employee's lower right leg, lacerating it. The employee was hospitalized.",1
An employee was using a pocket knife to cut the banding off a pallet of materials. The knife lacerated the employee's right calf. The employee was hospitalized and underwent surgery.,1
"At about 12:35 p.m. on March 28, 2022, an employee was operating a stand-up reach forklift when it struck another, parked forklift. The employee's left hand was crushed and broken between the two forklifts, and the employee was hospitalized.",1
"An employee was pulling an irregular cart full of heavy bulk packages out of an automated guided vehicle. The cart ran into him, pinning him against a structural pole and crushing his torso.",1
"An electric nailer was loading up when it became blocked. An employee was unblocking it when the chuck body on the nailer caused a laceration and amputation to his left index finger. The machine was guarded, but not locked out/tagged out at the time.",1
"At about 4:50 p.m. on March 29, 2022, a mail carrier was leaving her truck when she slipped, fell, and hit her head on the sidewalk. The next morning, she woke up with a headache and bleeding from the ear and was hospitalized.",1
"An employee was climbing a fixed ladder to reach a work platform. The employee slipped off the ladder and fell backward to the concrete floor, suffering head injuries.",1
"An employee was using a stationary jointer on a piece of wood. The employee's hands slipped off the wooden board, and the jointer's spinning cutters amputated the tip of the employee's left index finger, between the first and second joints.",0
"A temporary employee was carrying an armful of ratchet straps when one strap fell out of his arms, tangling his feet and causing him to fall. The employee sustained three broken ribs that required hospitalization.",1
"An employee was trying to repair a broken overhead door so that it would close. The door swung down and knocked him to the ground, breaking his pelvis. He was hospitalized.",1
"An employee was transferring diesel fuel from a tractor trailer into a drum. As the fuel entered the drum, it displaced the residue and vapors from a solvent that the drum had contained. The vapors came in contact with a battery-powered pump, creating an explosion. The employee suffered second- and third-degree burns.",1
An employee was walking on the ground below roofing activities. A piece of wood fell off the roof and struck the employee in/near the right eye. The employee was hospitalized for surgery.,1
"An employee was at a construction jobsite installing an elevator when one of his left hand fingers got caught between the governor rope and the top part of a handrail, resulting in a 1/2-inch fingertip amputation.",0
An employee was using a circular saw to cut a form board and lacerated his left hand.,1
"On March 29, 2022, an employee was working on a decking-type structure, cycling concrete back into the drum of a concrete truck while resting the pump hose on his shoulder. The pump hose clogged. As the clog pushed through the hose, the force caused the hose to fly out of control and strike the employee across the left side of the face. He suffered lacerations to the lower/upper jaw area, a fracture in his gum line, and broken and avulsed teeth. He was hospitalized, requiring wire braces and stitches to the lip and cheek.",1
"An employee was driving a reach truck. While turning to enter an aisle, he was caught between the vehicle and a rack. He suffered crushing injuries to the left leg, which had to be amputated at the mid-calf.",0
"While trying to install a 90-degree elbow for conduit, an employee contacted an energized component in a transformer.",1
An employee was test-driving a motorcycle when it collided with another motorcycle. The employee suffered a broken wrist.,1
"An employee was feeding wooden boards into a machine. A board did not feed through so the employee bent down to see why, when the board kicked back and struck the employee in the face, resulting in a laceration to the nose.",1
"An employee was feeding boards into a machine. A board failed to feed through, kicked back, and hit the employee in the face as he checked the machine. He suffered a nose injury.",1
"On March 29, 2022, an employee fell on an uneven asphalt driveway while delivering mail. The employee suffered a broken right hip that required surgery.",1
"An employee was using a pry bar to lift a millwork panel. Another panel (30 inches by 12 inches, made of medium-density fiberboard) was dislodged and fell onto his head, causing a concussion.",1
An employee was cutting open a bag with a hay knife and lacerated his left wrist.,1
An employee slipped and fell on a wet floor. He suffered a broken pelvis.,1
"An employee was lining up a garbage container with a rear-load garbage truck. His left little finger was pinned between the container and the truck, and the fingertip was amputated between the nailbed and the first joint.",0
An employee was preparing to unload an 84-inch-thick drill bit/shaft from a flatbed truck. The part started to shift and the employee jumped out of the way and fell to the ground (3.5 feet below the edge of the trailer) and suffered a broken hip.,1
"An employee was walking across a parking lot. A vehicle struck the employee, who suffered head trauma, a broken pelvis, and an injury to the right shoulder.",1
"An employee was cleaning a drill set. Water containing an alkaline instrument detergent splashed into the employee's eyes, injuring them. The employee was hospitalized.",1
"An employee had just finished moving a part with an overhead bridge crane and was beginning to move the crane out of the work area. He removed the hooks and chains from the part and began to lift the crane out and away from work area. As the hoist chain was moving upward, the chain hook caught the edge of the part. As the employee tried to keep it from falling over, it fell on his leg and pinned him to the ground. He suffered pain and swelling and was hospitalized.",1
"An employee was staging materials on a truck. The employee fell from the truck to the ground 4 feet below, suffering broken ribs and punctured lungs.",1
"An employee was unloading totes from a trailer using a forklift. As the employee was backing out of the trailer, the change in pitch of the forklift as it went over the dock plate caused the stack of totes to become unstable. The employee was bracing them to keep them from falling into the forklift cab when they lacerated and fractured his left ring finger. The finger was medically amputated at the collateral ligament.",0
"An automatic saw was clamping metal tubing. An employee's right index finger was pinched between two tubes, causing the employee to suffer an amputation to the finger.",0
"An employee was loading clothing into the baler machine when the machine caught her left arm wedging the arm between the front, interior wall of the baler machine's bale chamber door and the presser. The employee sustained multiple lacerations and arm fractures that required surgery.",1
"An employee tripped on a rubber mat and fell, suffering a broken right hip.",1
An employee was using a bore gauge suspended by a crane to measure the bore in the gear being worked on. The gauge became lodged and the employee tried to move it when it slipped and his right index finger was pinched between two metal parts of the gear he was working on. The employee suffered a fingertip amputation below the nail bed but above the first knuckle.,0
"An employee was removing trash around a press area. The employee tripped over an empty tote and fell to the floor, suffering a broken left hip.",1
"An employee was helping lower a manlift. The manlift's arm struck his lower left leg as it came down, causing contusions.",1
"An employee had just serviced a radiator on a concrete machine. During the final check on the machine, the employee was adjusting a hose when a fan caught his right index finger. The finger was amputated at the second knuckle.",0
"An employee fell while walking from an office to a parking garage, suffering a broken left arm and head lacerations.",1
An employee was installing insulation. The employee was struck in the head by a sheet of plywood that had been blown by the wind. The employee suffered a concussion and broken ribs.,1
"An employee was straightening a load suspended from a forklift. The load came off the forklift and struck the employee's arm, breaking it.",0
An employee was bringing up pipe from down-hole. The employee's left ring finger was caught between the tongs where the employee was working and the arm of the tongs on the opposite side. The fingertip was amputated.,0
An employee tripped and fell walking backward. The employee landed on the floor and suffered a cracked right femur.,1
"An employee was standing in front of the cash register of a gas station convenience store when a person entered the store and started to dump gasoline on the counter and shake it toward the employee. The employee attempted to leave when the person threw the gas can at her. The employee fell and the person threw a lit match at her, igniting the gasoline. A supervisor ran to the employee and assisted in putting out the flames. The employee was hospitalized with second and third degree burns to her face, neck, arms, and hands. The supervisor sustained first and second degree burns to her hands and forearms. The supervisor was treated but not hospitalized.",1
An employee was checking the to see if the power was off to the chiller. The employee touched the leads of the multimeter to the wires and an arch flash occurred. The employee sustained severe burns to his hands.,1
"An employee was anchoring wall plates, which entails fastening the bottom plate of a wall flat with screws to the deck/floor of the set. The employee was using a ladder on the sound stage floor to access a wall flat on the second level of the set on Stage D. As the employee was transitioning from the deck of the second level to the ladder, the employee lost his footing and fell approximately 9 feet to the concrete stage floor, landing on his feet. The employee sustained fractures to both his left and right ankles as well as his left and right fibulas.",1
"An employee was using a drill press to countersink holes so that the finished holes would be flush. He was adjusting the height of the machine when his glove made contact with the spindle. The glove ripped on the spindle, and his right middle and ring fingers made contact with the point of operation. He suffered amputations to both fingertips.",1
"An employee was walking from the print hut to the main facility building. The employee was found on the ground of the parking lot with a fractured left fibula, two broken left ribs, and a broken left collarbone.",1
"An employee was hooking a trailer up to a truck. The trailer fell on his fingers, amputating the tip of the left middle finger.",0
An employee was working in a bucket truck to put up a cable for a new telecommunication line on a utility pole. The employee was trying to throw the line over the trees when the line got stuck in vegetation and the employee fell 20 feet from the bucket to the ground. The employee suffered a broken leg and back injuries and was hospitalized. Fall protection was not worn at the time of the incident.,1
"An employee was operating a stand up forklift when their foot got pinned between the forklift and a rack, resulting in a swollen foot that required hospitalization.",1
"At about 4:30 p.m. on March 30, 2022, an employee was using a grommet press machine to punch holes in tarp material. The machine injured his left middle finger, necessitating a partial medical amputation.",0
"An employee slipped on spilled laundry detergent and fell, suffering a broken right femur. She was hospitalized.",1
"At 7:00 p.m. on March 30, 2022, an employee was reaching to clear debris from a drain. A butterfly valve was closed on his right index finger, causing a partial fingertip amputation.",0
"An employee was building 10-to-12-foot trusses on a truss production line. When the trusses are finished, a conveyor arm lifts up the conveyor so that a forklift can remove the trusses from the conveyor. Once the forklift is in position, employees have to lower the arms manually to allow the forklift to back out with the trusses. When the employee went to lower the arm, it came down quickly and pinched his right index finger between the framework of the conveyor and the bottom part of the arm. The employee suffered crush injuries that required surgery.",1
An employee was tightening a large bolt with a power tool. The bolt spun under the tool's torque and broke the employee's thumb.,1
"A temporary employee was helping an operator remove jammed laminations from a press machine when their right ring finger got pinched between the laminations and the brake of the chute, resulting in a fingertip amputation.",0
A forklift struck an employee as it backed out of a trailer. She suffered an injury to the left foot and was hospitalized.,1
"An employee was troubleshooting a feeder cart holding animal feed. As the employee shook a shoe on the feeder equipment, the feeder cart's wheels ran over the employee's fingertips. The employee suffered avulsions to the right thumb, index, and middle fingers.",1
"An employee had just set the brakes on an airport baggage cart. Another baggage cart struck the employee's cart and pushed it into him, knocking him down against a bollard. His head struck the bollard and was injured.",1
An employee was walking across the top of an open dumpster trying to level out the trash in it. He fell from the top metal ledge of the dumpster and suffered a broken left ankle that required surgery.,1
"On March 30, 2022, an employee was working from a height while performing tack welding on a rear frame when they fell to the floor, resulting in injuries that required hospitalization.",1
"An employee was trying to repair a standing lift truck/material handler, supported on jack stands, by removing a sheared-off threaded rod with vise grips in his hands. The forks shifted off the jack stands and fell onto his right hand, puncturing it between the ring and little fingers. He was hospitalized and underwent surgery.",1
"An employee was carrying a tray of food into a patient's room when they tripped and fell to the floor, resulting in a fractured leg.",1
"An employee was walking to their car when they stepped off the sidewalk into mud, slipped and fell, resulting in a lower left leg injury.",1
An employee was using a machine to fill bags with birdseed. The employee was clearing a stuck bag under the machine when the bag cutter amputated the employee's fingertip.,0
"An employee was helping move a spreader away from concrete. While her hand was on a travel lift spreader bar containing two pulleys, her fingers were caught in the pulley cable. She suffered amputations to two fingertips.",0
An employee was stabbed by another employee.,1
"An employee was conducting a new installation of a residential air conditioning unit. The employee was cutting to size a flexible, non-metallic conduit with a utility knife when the knife slipped and lacerated his opposing palm.",1
"An employee was hosing down and cleaning a concrete curb machine when the hose got caught and his hand was pulled into the auger of the machine, resulting in fractures and amputations of the right ring and little fingers.",1
An employee was operating a stand-up tugger when it struck an I-beam guard. He fell to the floor and suffered a broken leg.,1
"At about 1:45 p.m. on March 31, 2022, an employee was climbing down off the back of a tanker truck when his foot became entangled in the pump hoses. He fell off and his head struck the floor. He suffered a head laceration and temporarily lost consciousness.",1
"An employee was parked in the school parking lot and went to get out of the bus. When the employee was on the last step on the bus, stepping down to ground level, she lost her balance and twister her ankle. The employee suffered two broken bones in her foot.",1
An employee was helping a customer put a tarp on the back of a pickup truck. She jumped from the back of the truck onto the ground and fractured her right tibia.,1
"On March 31, 2022, an employee was releasing a valve when his left thumb was caught and the thumb tip was amputated.",1
"A contractor was delivering an oversized item (AV equipment) weighing approximately 350 lbs. As the two delivery people were moving the item through the entrance of the building, they lost control of it and an employee moved forward to assist. The item fell on the employee's legs and knocked him to the ground. The employee sustained torn tendons (ACL) in both knees.",1
An employee was trying to stop a sit-down rough terrain forklift from rolling downhill. The employee was caught between the forklift and a fence and suffered a broken pelvis.,1
An employee was using a table saw to cut wood when it lacerated the employee's hand.,1
An employee was in the process of a recipe change-over and was pushing product inside the extruder. The employee's right middle fingertip was caught in the extruder's agitator and amputated.,0
"An employee had removed the oil bin from a fryer and was spraying cleaner on the outside of the fryer. The employee tripped on the oil bin and fell backward into the bin of hot oil, suffering burns to a forearm, the lower back, and the buttocks.",1
"An employee was pulling a hose through barn doors. The employee opened the doors to free the hose, but the door slammed shut again. The employee suffered an amputation to the right index fingertip.",0
"While moving a pedestal fan, an employee's left thumb was lacerated by the metal fan blade.",1
"An employee was using a multi-meter to check the voltage of an electrical panel on an industrial microwave. She employee suffered an electrical shock to the left wrist, which called muscle damage and swelling.",1
"An employee was working on the hood of a truck to take off the grille. When he cut the strap that was holding the hood in place, the hood sprung open and knocked him to the ground. He broke his hip in two places and was hospitalized.",1
"An employee fell while getting off a forklift. He suffered a broken hip and was hospitalized, requiring surgery.",1
"An employee was at a loading dock, trying to strap a load of vinyl panels onto a dolly. The loaded dolly (weighing 300-400 pounds) tilted over on top of the employee, who suffered a back injury.",1
"An employee was operating hydraulic tongs during operations to remove a drill pipe from an oil and gas well. A 5 1/2-inch tubular struck the employee's right hip. He suffered non-displaced fractures to the pelvis, a rib, and the right ulna; as well as lacerations above his right eye and on the top of his head.",1
"An employee was descending a fixed cage ladder. He slipped and fell about 25 feet to the deck, suffering two broken ankles and a broken vertebra.",1
"An employee slipped on ice in a parking lot and fell, suffering a broken right ankle.",1
"An employee climbed onto a truck to raise its boom and secure it. He operated the lower controls of the bucket while crouching on the toolbox walkway. After raising the boom, he stood up, turned to take a step forward, and slipped. He fell off the side of the truck and the extended outrigger struck his right leg, breaking the tibia and fibula.",1
"An employee was walking in the parking lot, slipped on ice and fell. The employee fractured their back.",1
"An employee was preparing a stand in an operating room. She slipped and fell, suffering a broken right humerus.",1
An employee was unloading skids using a pallet jack and became pinned to the trailer wall sustaining a head injury.,1
An employee opened the lid of a meat grinder and caught her arm in the meat tumbler. She suffered an avulsion to the right forearm.,1
An employee fell and lacerated his arm on a sharp edge.,1
An employee was loading a truck and fell off the side of the truck. The employee struck the back of their head on the ground and was hospitalized.,1
An employee had just mounted the all-terrain crane deck using the installed stairway and was egressing across the crane deck to enter the operator's cab when they lost footing and fell off the upper cab's walkway. The employee fell down and away from the crane approximately 6 feet to the ground. The employee sustained an L1 vertebra fracture.,1
"An employee was cleaning a rental vehicle. Another vehicle struck the employee, causing a muscle injury to the back of the employee's right calf.",1
"An employee was climbing an extension ladder on a garage. He hit his knee and fell onto stone 12 feet below. He suffered two broken thoracic vertebrae, lacerations to the back, a damaged lung, and paralysis of the legs. He was hospitalized and underwent surgery.",1
An employee was adjusting a machine that was deenergized and locked out/tagged out. The employee removed an adjustment bolt on the machine and a component of the machine fell onto the employee's left index finger causing a fingertip amputation.,0
"An employee was driving a loader to a stock pile. The loader hit a bump and the employee fell out, landing on the ground 7 feet below and suffering fractures to the skull, the right and left shoulders, vertebrae, and ribs on the right and left side.",1
"An employee was driving a riding pallet jack through a door. The door came down and hit the pallet jack. The employee was thrown off the pallet jack and hit his head, suffering a cut under the eye and a cut on the back of the head.",1
"An employee was spotting a semi-truck and trailer as it backed up when they got caught between the trailer and a mini excavator, resulting in a broken femur.",1
An employee was installing a belt on two freely rotating pulleys on an extrusion dryer. The employee's left middle and ring fingers were caught between the belt and a pulley and were amputated.,0
"An employee was working from a platform on a concrete curbing machine. The employee stepped onto another platform, slipped, and fell on the platform, suffering a broken right tibia.",1
"Four employees were working to remove a housing cover from a motor. With one employee at each corner of the housing, they connected the lifting device to a 15-ton electric hoist. They had to rotate the housing 90 degrees to clear the motor. They then brought the housing back to its original alignment to then bring it down to the ground. The housing fell from the rigging device and struck one employee's left arm, catching it against the base of the unit. His ulna and radius were broken and he was hospitalized, requiring surgery.",1
"An employee was performing airflow maintenance work on a foam cup machine. The mold caught the employee's left hand as it came down, causing a laceration and burns. The machine was unguarded at the time.",1
An employee was operating a stand-up reach truck in an aisle and collided with the racking system while making a left turn on a wet floor. Both of the employee's arms were fractured.,1
An employee was operating a grinder and amputated three fingers.,1
"An employee was operating a table saw. While pushing a board through the saw, the board kicked back causing the employee's hand to contact the sawblade. Four fingers were amputated.",1
An employee exited the parking area and was struck by a vehicle as they crossed the street to enter the facility and begin their work shift. The employee sustained a broken right leg and lacerations to the left side of the head.,1
An employee was operating a manlift when it failed and fell three floors. The employee sustained two broken legs and a broken vertebra.,1
"An employee was working on the hydraulics on a front end loader. While the employee was greasing the cylinder, the bucket released and struck the employee, who suffered a broken nose and a possible cheek fracture.",1
An employee had been sorting small packages. The employee's hand was caught in a pinch point on a conveyor belt. Two of the employee's fingers were partially amputated.,0
An employee was removing 2-by-6 boards from the outfeed side of a table saw that was equipped with a dado blade. His hand was caught in the saw resulting in partial amputation of his left middle finger.,1
"An employee was driving a golf cart when it struck a safety bollard, resulting in a fractured left tibia.",1
"An employee was on the second floor of an apartment building under construction, installing plywood sheeting on a breezeway frame. The employee fell from the second floor to the first floor and suffered a skull fracture.",1
"On 4/01/2022, at 5:45 AM, an employee was operating a side wall inflator. The head of the machine came down on the employee's right little finger and amputated the finger at the second knuckle.",0
"On April 1, 2022, at approximately 5:55 AM, an employee was working in the cab take-off area when they slipped on a bolt. The employee fell against an empty dolly and then landed on the floor. The employee sustained a fractured left hip requiring hospitalization.",1
"An employee had just exited a delivery truck to fuel it. The truck rolled over the employee, who suffered two broken legs and a broken spine.",1
"A temporary employee was operating a cherry picker forklift with two pallets on the forks. While traveling backward, one of the pallets hit a storage rack. This pallet then pinned the employee's right foot against the rack resulting in amputation of the little toe.",0
"An employee was replacing an air bag on a trailer. The adjacent air bag support bolt broke off, which allowed the support bracket to thrust out and strike the left side of the employee's chest/abdomen. The employee suffered a ruptured spleen.",1
"An employee was using an overhead crane to dismantle a 2,000- to 3,000-pound mold for cleaning. The mold fell and fractured the employee's left leg. The employee required hospitalization and surgery.",1
An employee was using a magnetic clamp to align bolt holes on a plate. The employee went to adjust the plate and it got hooked on a bolt. The bolt caught the plate enough to pull it loose from the magnet. The plate fell and amputated the employee's left middle finger.,0
"An employee became tangled in an air hose. He was using his pneumatic staple gun to move the hose when the gun shot a staple into his right ankle. He was hospitalized, undergoing surgery.",1
"The injured employee unlocked and opened a door to allow an associate into the store. When the door closed, the injured employee's thumb was caught in the door jam resulting in a partial amputation of the right thumb tip.",0
"An employee was installing a chute cover (weighing approx. 200-250 pounds) onto a chute, using a come-a-long to lift the cover. A lifting lug on the chute cover broke causing the cover to fall and strike the employee on the left shoulder. The employee sustained a broken collarbone, requiring hospitalization and surgery.",1
An employee was operating a forklift in reverse to move products from a shelving unit to the loading dock when their right hand contacted the shelving unit. The employee sustained amputation to the ring and little fingers.,1
"An employee was loading a steel shelf on a brake press when the machine cycled, causing the employee's finger to get caught in the press and crushed. The employee suffered a fingertip amputation.",1
An employee fell off a truck while climbing it. The employee suffered broken ribs.,1
"An employee was fitting a T-beam into place with an overhead crane. The T-beam was moved into position under another one. The employee then attempted to lower the hoist and slack the line so the T-beam could rest freely. The crane raised the hoist instead, causing it to snag under the second T-beam, then break loose and strike the employee in the chest and face. The employee suffered fractured ribs, a punctured lung, and a fractured jaw.",1
"An employee was changing fluorescent lights when they received an electrical shock, resulting in hospitalization.",1
"An employee was operating a sit-down forklift, traveling from west to east adjacent to pallet racking. Another powered industrial truck (PIT) struck the employee's forklift on the left side. The PIT's right fork penetrated the seating section of the employee's forklift just above the battery housing and traveled under the operator's seat. The PIT's left fork struck the employee's left leg. The employee sustained a fracture and a puncture wound to the left leg below the knee.",1
"An employee was unplugging a pipe and then opened a small junk trap door when they were sprayed with hot stocking and water, resulting in first and second degree burns.",1
"On April 2, 2022, an employee was walking across a cutting line and moving an animal carcass out of the way. The employee came into contact with a hock cutter that was operated by another employee. The hock cutter closed on the tip of the employee's left index finger and amputated it.",0
An employee went outside to get the license plate number of a vehicle belonging to someone who had just stolen from the store. The vehicle ran over the employee causing lacerations on the employee's arm and legs.,1
"Employees were reinstalling the frame of a mechanical guard onto a raw sugar mixer. A chain fall was used to position the frame so it's weight was resting on the lower pedestal. The chain block was then unhooked, and an employee used a hammer to position the frame so the top bolt holes would be aligned. The bottom of the frame slipped off the pedestal and the frame fell two feet down onto the employee's right arm causing fractures to the radius and ulna.",1
An employee suffered a broken right knee while stepping off a pickup truck.,1
An employee sustained a back injury while removing a 25-pound paint can from the back of a pickup truck.,1
"An employee was operating a powered industrial truck. He was crushed between the truck and a wooden pallet of products, suffering a broken left leg.",1
An employee doing his rounds in a warehouse was struck by a moving forklift. The employee sustained a broken right leg.,1
An employee was on a scissor lift conducting demolition work on a concrete wall so a garage door could be installed. The concrete wall collapsed and knocked the scissor lift backward. The employee was ejected from the scissor lift and landed on the concrete surface below. The scissor lift also fell. The employee sustained severe lacerations and contusions to the back of his head.,1
"An employee was performing a rebuild of an auto-rehanger carriage, replacing the shaft and bearings. He had installed the last shaft bearing and realized that it was not seated properly. While working to remove the bearing with a hammer, he struck the bearing housing; the shaft and bearing housing dropped approximately one inch, catching his left middle fingertip against the machine frame. The employee sustained an amputation to the finger.",1
"An employee was removing boxes from a trash bin with a forklift. The forks were released and landed on the employee's right foot, breaking a toe. The employee was hospitalized.",1
"An employee lost her balance while turning to help a customer, fell, and broke her right ankle.",1
An employee was servicing an outer diameter grinder machine. The machine had been turned on for testing. The employee attempted to slow down a belt during shutdown. The employee's finger was caught between a belt and pulley resulting in an amputation to his fingertip. The machine was not locked out/tagged out at the time of the incident.,1
"An employee was checking receipts at the main entrance of a store. A customer got upset, left the store, re-entered it, and struck the employee in the face. The employee fell and hit his head on the ground. He suffered head trauma and was hospitalized, requiring surgery.",1
A crew of Fluor Maintenance Services employees was replacing an expansion joint in an I/O box at a power plant. One of the employees was using a grinder to prepare metal to install and weld the joint when steam entered the work area and burned his back. He was hospitalized.,1
"An employee was climbing a scaffold ladder from one deck to another. The employee fell, landing on the ground 10-12 feet below and suffering an injury that caused numbness from the left knee to the left foot.",1
"An employee was troubleshooting a malfunctioning thermocouple. A pitch tank began to leak, and the employee suffered burns to the wrist and neck from the liquid pitch, as well as burns to the lungs from inhaling the liquid pitch steam.",1
"An employee was helping with a vehicle on a race track. A race car struck the employee, who suffered an ankle injury. The employee was hospitalized.",1
"An employee was walking in service alleys when they slipped and fell, hitting their head on the corner of a wall. The employee sustained a seizure and was hospitalized.",1
An employee climbed a ladder and was looking over a half-wall. The celling tiles collapsed causing the employee to fall approximately 8 feet to the ground.,1
An employee was ascending the ladder on a tank container while a second tank container was being dropped adjacent to him. The second container hit the container he was climbing and his hand got caught between the two containers resulting in the amputation of fingers.,1
"While helping with an unruly patient, an employee was pushed into another employee and both fell to the floor. The second employee suffered a broken right leg.",1
An employee tripped over the edge of an L-cart while stocking freight. The employee's femur was broken.,1
"An employee was operating a forklift when he struck a warehouse rack, suffering a fracture to the lower left leg. He was hospitalized, requiring surgery.",1
An employee was moving a pallet with 3 or 4 75-pound jugs on it. The part of the pallet the employee was pulling on broke causing the employee to fall and sustain injuries to the head and back.,1
An employee had been standing on the sidewalk. The employee confronted a shoplifter and the shoplifter stabbed the employee in the abdomen with a knife.,1
An employee cut his ankle with an angle grinder that was equipped with a saw blade.,1
"An employee was lifting a chain off a sprocket on a tire balancer. The chain slipped while his left index finger was between it and the sprocket, causing an amputation to the fingertip.",1
"On April 4, 2022, two employees were repositioning a steel coil to be fed into a press. While the coil was on the ground, it fell over onto one employee's lower left leg. The leg was broken and the employee was hospitalized, requiring surgery.",1
"While standing behind a retaining wall, an employee was setting up a 24-ft. extension ladder on the side of a house. The employee fell over the retaining wall and landed on the ground approximately 5-6 feet below. The employee sustained fractures to the left hip, left femur, lower lumbar area, and the right ankle.",1
"An employee was working in a loading area on a 10-foot ladder to help lower an empty 4-foot by 4-foot agricultural bin that had become lodged between a forklift's forks and a dump truck. The bin was lowered to the ground and the forklift began to back away from the truck. This caused the employee to lose his balance and fall, landing on the sidewalk 8 to 10 feet below. He suffered a 1-inch laceration to the forehead, a stress fracture to a small bone in the wrist, and a chip in the bone connecting his hip to his pelvis. He was hospitalized.",1
"An employee was holding the door open for another employee when her foot got stuck in the floor rug, resulting in a dislocated femur fracture in the left leg.",1
"An employee was climbing down a ladder after installing a gutter guard when the ladder slid out from underneath him, causing him to fall onto the ladder and resulting in a concussion and several facial fractures.",1
"At 6:00 p.m. on April 4, 2022, an employee was removing debris from a bandsaw table when his right thumb contacted the sawblade. He suffered a partial amputation.",1
An employee was working to secure a mold to a machine. The employee attempted to step/jump over the frame portion of a molding machine when one of his feet landed on a small square dolly. The dolly rolled and the employee fell to the floor sustaining a fractured right fibula.,1
"An employee was pushing a dumpster toward a waste truck. His hand was caught between the dumpster and the truck, and his right index finger was crushed. The finger was medically amputated.",1
"An employee was reaching for a pot on a shelf. The pot fell, causing the employee to grab onto a metal table, which partially amputated the employee's left ring fingertip.",0
An employee was working on an aircraft when he lost balance and fell to the ground below breaking his left tibia and fibula.,1
An employee was in an oil change pit doing an oil change on a vehicle but he was unable to reach the oil filter. The vehicle was then moved into a different position. When the employee reached up for the oil filter his hand was caught in a belt and drawn up into the fan of the vehicle. The employee's little finger was amputated and their ring finger was partially amputated.,0
"An employee was locking up a pitching machine in a metal building. The key is stored on a ledge, which is approximately 6 to 7 feet in height. The employee could not reach the ledge and jumped up to put the key back when the ring on their left ring finger became stuck on the ledge, resulting in an amputation.",1
An employee was setting up a press machine. He was reattaching the air supply to the press when his right index finger was caught and fractured in two places.,1
"An employee was parking a powered industrial truck. The employee exited the machine, which kept moving and caught the employee's right foot against a guardrail. The foot was broken and lacerated.",1
"An employee was preparing to enter the riverboat from the dock area utilizing the gangway to remove film equipment from the ship's upper deck. The employee crossed the gangway midway, and the structure collapsed causing the employee to fall approximately 20 feet striking the dock/boat railing and landing in the water below. The employee incurred a broken humerus bone, several fractures in the right hand, a broken tailbone, and lacerations and abrasions on various parts of the body.",1
"A Charter Communications service technician was at a customer's location installing a communications line between telephone poles. While descending a ladder, the technician's foot slipped off a rung and he fell approximately 10 to 14 feet to a paved surface. He landed on his back and fractured a vertebra.",1
"On April 4, 2022, at 9:00 a.m., the injured employee was training another employee on how to adjust the deck height on a gas-powered push mower. A switch was engaged and caused the mower blade to strike the injured employee’s left hand causing an amputation to the middle finger and a laceration to the ring finger. The laceration required stitches and the middle finger was reattached.",1
"An employee was putting away products using a ladder. As the employee was descending the ladder, she lost her footing and fell to the floor, resulting in a concussion.",1
"An employee working on a roof was walking backward while rolling out roofing material. The employee fell off the roof edge, resulting in several fractures to their legs, hips, and ankles.",1
"On April 4, 2022, at 9:45 a.m., an employee and co-workers were hoisting a fire pump via chain falls through a handrail onboard a ship. The fire pump electrical box got caught on the handrail section and broke free under tension, catching the employee's left thumb between the fire pump and the handrail. The employee suffered a laceration that resulted in a fingertip amputation.",0
An employee was responding to an error message in the automated storage and retrieval system (ASRS) when he was caught-in/between and struck-by the center aisle transfer cart in the automated racking system and a structural beam. The employee sustained a broken left forearm.,1
An employee was bent forward at the waist placing boxes inside a gaylord container and adjusting the positioning of the boxes to organize them better. The employee stood up and felt pain in the lower back.,1
An employee was lifting a furnace when it flipped. Sheet metal from the furnace lacerated the employee's left thumb.,1
"While operating a flexographic press, an employee went to wipe the roller with a paper towel to remove fuzz and became caught in the roller. The employee sustained a partial amputation of the right index finger.",0
An employee was walking through a parking lot at a warehouse when a reversing forklift struck him and ran over his leg. The employee was hospitalized with a dislocated knee.,1
"An employee was working on a precision machine tool. The machine caught the employee's glove and pulled in the employee's right hand, resulting in the amputation of the middle finger.",1
An employee was operating a forklift when it struck a storage rack. The employee suffered a broken collarbone.,1
An employee was on a scaffold using a paint sprayer to spray around HVAC ducting. The employee fell 8-10 feet from the scaffold to the concrete floor and sustained fractures to the collarbone and pelvis.,1
"Employees were performing construction work on an esplanade. Three employees were retrieving float stages that were secured alongside a barge and taking them approximately 150' North to a second barge. The float stages were to be loaded with forms and sent under the esplanade to be installed. In order to retrieve the float stages the operation required a boat to pull back the floats to release the tension in the lines (2 each, one at the North end and one at the South end of the floats) due to the flood tide. The boat was positioned South of the float stages. Two employees left the boat and boarded the floats. They tied a line from the boat to the float stages and moved to the lines securing the floats to the barge. One employee was on the South end of the float stages and a second employee was on the North side, each at a line. When the tension was released by the boat, both employees released each line. The platform was also released from the boat to allow for the boat's navigation around some piles. They floated North on the float stages. Once the float stages moved beyond the end of the barge, the float stages turned 90 degrees and were pointing In an east to west orientation, broadside to the current. Once broadside to the current, the current took them North causing them to strike the South end of the barge approximately 150' away. The two employees attempted to push the float stages away from the barge, but were unable to. At this time the third float stage started lifting and pushing the second float stage into the first float stage. The first float stage was pushed in the up and down position (90 degrees vertically with the flat side against the barge) and pinned against the barge, the second float stage came to rest on the first float stage side horizontally (parallel to the water), and the third float stage was also turned and was pushing on the backside of the second float stage. The injured employee's legs were pinned between a float stage (20' x 5') made of timbers and the barge with a steel hull (180' x 60'), resulting in a right tibia and fibula fracture and a left fibula fracture.",1
"An employee was working on the second level of a stairwell. The employee fell, landing about 5-6 feet below and suffering a head injury.",1
"An employee tripped while installing seals, fell to the ground, and suffered a broken right tibia.",1
"An employee had a new piggyback brake chamber on the work bench and needed it caged. The employee was using a blow gun to simulate the brakes releasing so he could install the caging bolt. While installing the caging bolt by holding/squeezing the bolt, the blow gun lost its seal on the fitting, which caused the threads of the bolt to slide across his left fingers. The employee lost flesh from his middle finger, and to a much lesser extent his index finger.",0
"An employee was attaching an equipment tow tongue to a tow hitch on a tow tractor. His right index finger was caught between the tongue and the hitch and crushed, causing a fingertip amputation.",0
An employee had been climbing a ladder to take a measurement. The ladder kicked out and the employee fell approximately 12 feet to the ground. The employee sustained a fractured right ankle and their pelvis was fractured on the left side.,1
An employee was walking down stairs when his foot caught the last step and he fell to the floor. He suffered torn tendons and ligaments in both knees.,1
"An employee was operating a tractor with forklifts when the tractor became stuck. The employee got off the tractor to free the backhoe. When the tractor broke loose, it ran over the employee's left side. The employee suffered injuries that resulted in respiratory complications.",1
"An employee was working from a scaffold when it toppled over, causing the employee to fall and suffer a broken leg. The employee was hospitalized.",1
An employee had been detailing batteries. The employee had a physical altercation with a coworker and sustained a right leg fracture.,1
An employee was going up stairs to the kitchen deck. A forklift mast struck an overhead pipe causing it to swing down and strike the employee on the head. The employee was hospitalized for a head injury.,1
A maintenance employee was leaning on the stacking machine holding a flashlight for another maintenance employee when the machine activated. The employee's elbow was caught by the stacking machine resulting in contusions to the elbow.,1
An employee was using a jib crane equipped with a magnet to move a metal channel from the stacked material to the jig for fitting. The channel struck some stacked material and the magnet disengaged causing the channel to fall on the employee's ankle and fracture it.,1
"An employee was adjusting the rigging for a steel pipe that was on a forklift. The pipe rolled off the forklift and struck the employee's ankle, breaking it.",1
"A contractor was operating an overhead crane in a bay. The crane malfunctioned, causing it to travel forward at full speed and strike the crane stops on the overhead rails. One of the crane stops flew into an adjacent bay and struck an employee. The injured employee was hospitalized with fractures to the skull and ribs.",1
An employee was reattaching the coil lifting device to the overhead crane. The coil lifting device struck and fractured the employee's lower right leg.,1
An employee was troubleshooting a feeder gearbox. The employee's index finger was caught in a gear and amputated.,0
An employee was feeding hats onto an apron when their arm was caught in a roller and crushed. The arm was later amputated.,1
An employee was walking from his car toward the building and fell forward sustaining scrapes on the right side of his head and a possible head injury.,1
An employee dropped a piece of stone on his foot and fractured it.,1
"At about 8:00 a.m. on April 5, 2022, an employee was using lifting equipment to lift a pump that was to be repaired. The pump shifted and the employee's right hand was caught between it and a boat deck. The employee's right index and middle fingers were crushed and the employee was hospitalized.",1
An employee was being trained on how to operate an electric pallet jack. The employee sustained a fractured fibula requiring hospitalization.,1
A nail gun fired a nail into an employee's leg.,1
An employee was operating a pallet jack when a pallet of product started to fall and he turned to try to grab it. He lost control of the pallet jack and was caught against a guard rail. The employee sustained a left foot fracture.,1
"On April 5, 2022, an employee working in a walk-in freezer was pulling a manual pallet containing frozen foods when he slipped and fell backward, resulting in a contusions to the spine and head that required hospitalization.",1
An employee was lifting boxes of produce and suffered a hernia. The employee was hospitalized.,1
"An employee was attempting to pull a large rolling cart of golf balls into a service elevator when his right little finger got caught between the outer edge of the rolling cart and the elevator door casing, resulting in a fingertip amputation of approximately 1/4 to 1/2 inch.",0
"An employee was driving a truck and pulling an empty trailer from a dock door at a warehouse facility. As the empty trailer moved to a drop lot, the truck and trailer rolled over. The employee sustained broken ribs, a punctured lung, and a lacerated spleen.",1
An employee's left knee entered a fryer. He suffered burns from the hot oil.,1
"An employee was replacing the belt on a rooftop air conditioning unit. He was trying to stop the belt when it pulled his gloved hand into the pulley, causing amputations to his right middle, ring and little fingers.",0
"An employee was raising a hydraulic stinger from a transportation trailer when the employee noticed a hole in the hydraulic line. The employee's thumb contacted the hole and hydraulic fluid while engaging the stinger, resulting in a puncture to their right thumb.",1
An employee was walking back to the office after observing a team member when he tripped on the base of a pallet wrapping machine and fell to the ground. The employee struck his right shoulder and suffered a shoulder fracture.,1
An employee was working on a steam line to repair two visible condensation leaks on a bottle washer. An in-line ball valve was opened causing steam to exit a open pipe and burn the employee on the left side of their torso.,1
An employee was using an acetylene torch when the hose caught fire. He suffered  burns to his hands.,1
"On April 6, 2022, at 1:00 a.m., an employee was performing linework on an overhead powerline. The employee was crimping a neutral lateral jumper when the crimper tool contacted the powerline and an arc flash occurred, resulting in electrical burns to the employee's face and shoulders.",1
"An employee was connecting power cables/cords on the floor of a rig. The employee was partially standing on the bat door when it activated, causing the employee to fall approximately 30 feet to the ground and sustain eight fractured ribs, a punctured lung, and bruising to the kidney, liver, and spleen.",1
"An employee had been pulling products at a packing station. While trying to retrieve a pad that had fallen onto the serpentine belt, the feed shelf cycled, which engaged the serpentine belt and the employee's right hand was caught between the belt and gear mechanism. The employee's right index finger was amputated to the first joint. A guard was in place at the time.",0
"On April 6, 2022, an employee fell down the steps of a shuttle bus while disembarking and suffered back fractures.",1
"An employee was putting garments away. As the employee turned to put garments away, their knee brace snagged on a cart causing the employee to fall to the ground. The employee suffered a right hip femoral neck fracture and a head laceration that requires staples.",1
"An employee was servicing a truck-mounted loader crane. The crane started up  and pinned the employee between the crane and the cab of the truck. The employee then fell approximately 3.5 feet to the ground, suffering fractured ribs, a punctured lung, fractured vertebrae, and a broken arm.",1
"An employee was preparing to conduct construction activities in a parking garage stairwell when they fell through unsecured decking to the concrete 12 feet below, resulting in a broken femur.",1
A two-man crew (journeyman and apprentice) were installing two light fixtures in an acoustical ceiling. The journeyman made contact with an energized wire and suffered electrical shock and burns to their hand. The employee was hospitalized.,1
An employee was stepping over a yellow chain as they exited a storage garage when the chain caught their foot and they fell onto the pavement. The employee suffered a fractured and dislocated right proximal humerus that required surgery.,1
An employee was walking to exit the facility and was struck by a forklift. The forklift ran over her right foot resulting in amputation of toes.,1
An employee was moving an electric pallet jack and pinned his leg between the jack and a safety pole resulting in a fracture to the lower leg.,1
An employee contacted a bus bar while cleaning the inside of an electrical substation switch gear. The employee sustained burns to a hand and leg.,1
"An employee was walking down stairs, crossing over the conveyor, and fell. The employee sustained a severe laceration behind the right knee.",1
"An employee got caught in the pinch point between the moving rolls while cleaning the roll, resulting in lacerations to his hand.",1
An employee fell on the concrete dock floor after tripping/slipping on a flat cardboard package. The employee sustained a left hip fracture.,1
An employee was lifting heavy objects and suffered a bulging disc.,1
"An employee was rolling up straps to prep his trailer load. He stepped backward, tripped, and fell. He was hospitalized for a possible head injury.",1
An employee was rewinding and inspecting a roll of printed labels when their right hand and arm were caught and pulled into a roller resulting in a fractured arm.,1
An employee was working on power lines and received an electric shock.,1
"An employee was exiting an elevator to get more supplies from a different unit when they slipped on a puddle of liquid on the floor and fell, fracturing their ankle.",1
An employee was climbing a ladder when the ladder shifted and the employee fell approximately 10 feet.,1
An employee was operating a brake press. Their left hand got caught in the die when the machine cycled resulting in crush injuries to the hand that required hospitalization and surgery.,1
"The injured employee had just finished tack welding one end of a 14"" diameter carbon steel pipe that was 21 ft. in length. He walked down the length of the pipe to stand at the opposite end to ensure the pipe was aligned straight. Other employees began to slide the next section of pipe into place and the injured employee's left leg was pinned between the two sections of pipe. The employee sustained a compound fracture and was hospitalized for surgery.",1
"An employee entered a pool room and saw water coming from the top of the chlorinator, spilling out onto the floor of the pool room. The employee attempted to repair a leak in a pump when chlorine began to leak and the employee inhaled the chlorine.",1
"An employee walked into the backroom, tripped over a tote and fell, sustaining a broken hip.",1
An employee was cutting a piece of aluminum using a miter saw when the saw amputated her left index fingertip below the nail.,0
"On 4/05/2022, at about 11:30 AM, an employee of Tirone Electric, Inc. was speaking to an employee of another company on the loading dock at the other company's worksite. The employee of Tirone Electric, Inc. was struck by the rear of a reversing freight truck and was pinned to a wall, resulting in broken ribs and multiple lacerations to the torso and arms.",1
"An employee was connecting a 3/4"" air hose to the plant's air supply service. He slipped and fell forward opening a valve that released air at 104 PSI. The employee sustained a laceration to the left forearm.",1
"An employee was feeding sponge into a single pack wrapping machine when the product jammed the machine. After clearing the jam, the employee's right hand got caught by the crimper and their middle and ring fingertips were amputated.",0
"A bundle of steel bar (6-4""x 20') slipped from the lift cables of a crane lift, striking two employees who were pinned again the rail car wall. One of the injured employees suffered a leg laceration that required surgery.",1
"An employee was helping a stranded motorist who was stuck in sand when the employee fell and hit the back of his head on rock or pavement, resulting in a skull fracture.",1
"On April 6, 2022, around 12:30 p.m., an employee in the Energetics Loading Room was loading a Division 1.3 explosive blend, TBK Initiation Powder, in to a BBU-48 Dual Impulse Cartridge. During the clearing of the funnel that is used to load the explosive blend into the cartridge, a glancing blow between the handheld tool and funnel caused a deflagration event to occur and the employee suffered second and third degree burns to the hands and arms. The employee was hospitalized.",1
"On April 6, 2022, an employee was crossing a new road in a vibratory roller to compact the material on the new road when the roller fell off the road and into an adjacent canal. The employee suffered back pain and a laceration to his inner left thigh.",1
An employee was working near a machine with a spherical hammer grab moving debris from a barge to land. The employee's right index finger was caught in the jaws of the spherical hammer grab and amputated at the first knuckle.,1
"An employee was removing a nail from plywood while on the second rung of a wooden ladder. The plywood swung and hit the employee, knocking him off the ladder onto the ground. The employee sustained a fractured right arm.",1
An employee was using a band saw to cut meat on a board. The saw blade cut his left index finger resulting in a 1/4-inch amputation of the finger.,0
"An employee opened a trailer's rear door and was struck on the right foot by forklift blades that had been stored on a pallet and shifted during transportation, resulting in a contusion.",1
"An employee was removing bolts on a lead pump pipe to investigate a plug. While loosening the third bolt, molten lead sprayed out and hit the employee all down the right side of his body. The employee sustained first and third degree burns.",1
"An employee was on a wooden platform hoisted approximately 9 feet by a rough terrain telehandler forklift performing framing work on a gable at the back of the house. The employee was pinned between the gable and the forklift when the forklift moved. The employee sustained several broken vertebrae, a broken shoulder and broken ribs.",1
An employee was clearing a clog by spraying water with a hose when a chemical splashed back into the employee's eyes. The employee sustained burns to the eyes.,1
An employee was pulling a cooler cart onto a trailer's liftgate when the cart trapped his foot against the lip of the liftgate ramp. The liftgate was in the elevated position and the employee fell backward resulting in a open fracture to his right lower leg. The employee was hospitalized and required surgery.,1
An employee was chopping vegetables with a knife and amputated the tip of their left index finger.,0
An employee was using a bench grinder to grind off burrs from steel fabrication. The employee turned the steel on an angle and the grinder pulled the steel shank along with the employee's finger into the grinding wheel. The employee sustained an amputation to the left index finger.,0
"An employee was walking in a hangar when they tripped on the edge of a power cord guard and fell to the floor. The employee sustained a fractured left leg, requiring hospitalization and surgery.",1
"While unloading a cart of cheese from a skid, an employee tripped and fell, sustaining a broken hip.",1
An employee was walking back to her work station. She tripped over the corner of a wooden pallet and fell to the ground sustaining injury to a knee and tendon.,1
"While operating a chop saw, an employee's left hand was caught in the machine's point of operation. His middle and index fingers were partially amputated.",1
"An employee tripped on and fell into a pile of debris, resulting in a broken right ankle.",1
An employee had been installing gutters and fell 40 to 50 feet from the third story of a scaffold. The employee landed on a property fence and sustained a back fracture.,1
"On April 7, 2022, an employee was performing a pick walk and was loading garden soil onto a dolly. She experienced chest pain radiating to her left arm and was taken to the hospital for a heart attack.",1
An employee was removing crusted debris from the sheeter/extraction belt with his left hand when his fingers were caught between the drive roller and tension roller resulting in a degloving injury and amputation of four fingers on the left hand. The machine was not guarded at the time.,0
An employee was operating a single head hinge machine to drill and insert hinges on cabinet doors. A rotating bit caught her glove and caused lacerations to her left hand and a left thumb fracture.,0
"An employee was holding a well head cap preparing to pack a wall off when the slips holding a pipe failed and the pipe came down on his fingers, resulting in an amputation.",0
"An employee was working on a precision cutter that takes yarn off of cones by unraveling it. The employee was pulling cones out of a box and tying new filament to existing filament strands when a knot formed beneath his right hand and caught his right index finger, resulting in an avulsion that required hospitalization.",1
"On April 7, 2022, an employee was walking along a road path when he was struck from behind by a lift truck that was carrying an A-frame containing slabs. The employee sustained a fractured ankle and road rash.",1
An employee was moving a lift with one hand and holding a chainsaw in the other in preparation to continue tree trimming. The chainsaw kicked back and struck the employee's face causing a laceration with orbital bone tissue damage.,1
"An employee was working on a repair patch on the floor when they slipped and fell on the wet repair patch, resulting in a ruptured or torn knee.",1
An employee working from a ladder was using a pry bar to make a separation between decking and a metal frame in order to place a chain hoist with hook. The employee fell from the ladder and sustained a lower leg fracture and a forearm fracture.,1
An employee was operating a cap saw when a block of wood became wedged between the saw blade and the conveyor. The employee turned the saw off and was reaching under the saw to remove it when the blade lacerated the employee's hand.,1
"On April 7, 2022, an employee was picking oranges and fainted, resulting in hospitalization due to dehydration.",1
An employee was clearing a block of wood behind a saw when he contacted the saw blade. The employee sustained a finger amputation and lacerations to their hand and fingers.,0
The employee was elevated in the basket of an aerial lift trimming tree branches. He came down in the basket of the aerial lift and began stepping down the access ladder on the side of the truck when he slipped and fell four feet to the ground. The employee suffered back pain.,1
An employee was clearing out debris from a tacking machine when their arm became caught in the machine and broken.,1
"Employees were troubleshooting a cut-off saw used in the lab. The saw was locked out, but the pneumatic hold-down vice of the saw was not. The vice actuated and caught a maintenance employee's finger resulting in a partial fingertip amputation.",0
"On April 7, 2022, an employee was conducting a high-pressure wash of a frack tank when oil and gas frack water entered their eyes, resulting in blindness in the right eye. An eyewash station was not available at the time.",1
"An employee was on the roof attempting to untangle an air hose. After untangling the hose, he began to walk back up the roof, but his foot was caught in the hose causing the employee to lose his footing and fall from the roof to the ground below, resulting in a left wrist fracture.",1
"An employee was preparing to conduct a maintenance cleanout of an industrial dryer. A hot mixture of concrete, sand, and pebbles fell onto the employee and burned their left wrist.",1
An employee was standing on the front tire of a truck cleaning the windshield. He slipped on the wet tire and fell to the concrete floor sustaining five cracked ribs.,1
"An employee was making a delivery at a customer's business. When the employee pulled the pallet jack over the lip of the door frame, he slipped but regained his balance. The employee heard a pop and then fell to the ground. The employee sustained injury to their quadriceps tendon and patellar tendon.",1
An employee was checking the setup of a die casting machine when the lower punch broke into pieces. The broken pieces struck and punctured the employee's skin in multiple places on his torso and arms.,1
An employee was working on a pulling unit when their left little finger was caught between some polish rod slants and moving equipment resulting in amputation of the finger.,0
An employee was clearing bags from a machine when the open roll knife amputated their right index fingertip.,0
An employee was cleaning a machine's roller with a rag. When the machine was jogged his right middle finger was pulled into a nip point resulting in a partial amputation.,0
"On April 8, 2022, at approximately 5:11 PM, an employee was installing chains around a mold. The chains were connected to an overhead crane. As the crane operator began moving the mold the employee was caught between the mold and a fixed object resulting in a broken left hip.",1
"On April 8, 2022, an employee was trying to stabilize freight (individually boxed glass panels) that was lined up from sidewall to sidewall inside a trailer. The freight started to lean and the employee tried to catch it. The employee lost his balance due to the weight (660 lbs.) of the freight and hit his head on the side of the trailer, sustaining compression of the cervical spine and fractured vertebrae that  required surgery.",1
"An employee was cleaning debris off a riding mower so it could go to the mechanic for maintenance. He was about to blow debris out of the hydraulic area when a nut fell into the hydraulic system. As the employee reached to retrieve the nut, the hydraulic pulley partially amputated the middle and ring fingers on his left hand.",1
"A team of employees was demolishing a scaffold. As an employee was passing down material to other employees, he was struck by a nail that fell from the platform above. He sustained a corneal abrasion to the right eye.",1
"On April 8, 2022, an employee was leaving the MRI Room and used her left hand to hold the door's handle while her right hand was holding the edge of the door. As the door closed, her right middle finger got caught between the door and the door jam resulting in amputation of her right middle fingertip without bone loss.",0
Employees were doing roofing work on a two-story single family residential house. An employee was removing old shingles and went to get plywood when the wind caused the employee to fall approximately 20 feet to the ground level.,1
"On April 8, 2022, an employee was replacing a service drop at a residence. A ladder was hung from the hardline strand facing away from the house. While the employee was descending the ladder the cable from the house let go and sling shot the employee off the ladder onto the ground. The employee sustained a compound fracture to the right lower leg.",1
An employee was hanging metal awning using a battery-powered drill. The drill slipped and his left little finger was caught in the drill bit resulting in amputation at the first knuckle.,1
An employee was unhooking a delivery line and was splashed by a caustic chemical resulting in chemical burns to the face and eyes.,1
An employee was standing at a work desk when their shoe caught on the carpet causing the employee to fall to the floor and sustain a broken left hip.,1
"On 4/08/2022, a concrete mixer truck driver fell while rinsing his truck. He was hospitalized for a possible concussion.",1
An employee was building the fourth layer of a scaffold when they stumbled and fell to the ground about 16 to 18 feet below.,1
A forklift operator was preparing a forklift with extenders for an oversized load. An extender slipped and pinched her finger against the existing fork resulting in amputation of a fingertip on the right hand.,0
An employee was at a customer site to service a paper punch machine. The employee's left ring and little fingertips were in the die area when the machine cycled resulting in amputation of both fingertips.,0
"On 4/09/2022, at 4:05a.m., an employee had a verbal and physical altercation with her nephew and was injured.",1
"On April 9, 2022, at approximately 6:30 a.m. two Continental Tire employees were injured when a flash fire occurred during welding operations. Employee 1 was welding a stuffer door onto a mixer while Employee 2 was performing fire watch duties. The door ram needed to be welded back on to the stuffer door after a hydraulic/oil leak was identified on the mixer and fixed. Employee 1 was hospitalized with burns to his arms and back. Employee 2 had singed hair and was treated and released.",1
An employee was untangling cable on the drum located on the back of a wireline truck. Both of his hands were caught in the cable and pulled into the compensator shield resulting in amputation of his left little finger.,1
"An employee was under a conveyor belt, troubleshooting a vibrating motor. The employee tried to get up, and the conveyor belt contacted the employee's shirt and pulled the employee's left arm into the rollers of the belt. The arm was broken.",1
"An employee had been clearing a plate carrier jam on an industrial oven. During reassembly of the oven rails, one of the oven plates opened causing the hinged top section of the plate to swing down and catch the employee's left ring finger against a frame rail. The employee was hospitalized with a fractured and lacerated left ring finger.",1
An employee was positioning a lifting magnet (weighing approximately 500 lbs.) onto a piece of steel to move the steel to another location. The magnet slipped off the steel and the magnet's safety bar caught the employee's fingers against the steel amputating his left middle fingertip and crushing the left ring finger.,0
"An employee was working on the wheels of a hydraulic lift table. When he disconnected the hydraulic hose to relieve pressure, the scissors and weight from the back half of the table fell onto his right arm. The arm, elbow, and hand were crushed.",1
Employees were attempting to correct an offset on a steel frame using a scale weight and a forklift. The forklift operator was setting the scale weight on the steel frame while the other employee was holding the steel frame. The employee holding the frame had their left little finger pinched between the weight and the steel resulting in amputation of their fingertip.,0
An employee was clearing tables and tripped on a customer's chair falling to the floor and breaking their hip.,1
"An employee was driving a dump truck up an incline on a haul road. The truck stalled out and began to roll backward. When the employee engaged the brakes, the load shifted and caused the truck to tip onto its side. The employee sustained a fractured left clavicle and a possible skull fracture.",1
"An employee was changing a tire. While the employee was adjusting a jack, the vehicle slipped and crushed the employee's left hand against the jack. The employee's index finger was amputated.",0
"An employee fell down the stairs from the second floor to the first floor, landing on the bottom step. The employee was hospitalized for fractured ribs and an injured spleen.",1
"An employee was on a roof working to replace a skylight. While receiving equipment from the ground, the employee fell through a skylight to the ground below. The employee sustained injury to the spleen and liver, as well as fractures to their hip, ribs, and an arm. The employee was wearing a harness, but it was not connected at the time of the fall.",1
"An employee tripped in front of an entrance and fell to the floor, suffering a broken right shoulder.",1
"An employee fell while walking to the shoe department, sustaining injury to the hip and arm.",1
A Lowe's employee was driving a forklift behind the building when the forklift struck a yellow safety bollard and tipped over onto its side. The employee was hospitalized with a leg injury.,1
"An employee was trying to remove the hood of a tractor. The hood fell onto his left leg, breaking bones.",1
An employee was using a disc sander on a square piece of metal. The force of the disc sander pushed the metal piece down to the work table causing the employee's right thumb to be caught between the metal piece and the sanding disc. The employee's thumb tip was partially amputated.,1
An employee was walking down an aisle and fell to the concrete floor. The employee was hospitalized for a fractured skull and orbital bone.,1
"An employee was sanding a piece of metal on a disc sander. The sanding wheel pulled on the piece of metal, causing it to get stuck and pull the employee's hand up against the machine resulting in a partial amputation of their left thumb.",0
"An employee had been working outside during the day on April 11, 2022, where the temperature reached a high of 89 degrees. The employee drove to a gas station where he fell ill. The employee was hospitalized for heat exhaustion.",1
"At about 4:25 a.m. on April 11, 2022, an employee was using a powered industrial truck (PIT) to load a pallet of mail onto a 7-ton truck. As she was pressing the button to bring the lift up, the PIT moved and crushed her foot. She suffered a broken left ankle and was hospitalized.",1
An employee was unloading utility poles into a dumpster when their right ring fingertip was crushed between a pole top and the edge of the dumpster.,1
An employee slipped and fell while walking in a parking garage and sustained a fractured right orbital bone.,1
"An employee was operating a roller threader when their glove became intertwined with the spinning rod, causing their hand and arm to become twisted around the bar. The employee's arm and two fingers were fractured.",1
"An employee was in a paint booth, lifting something above his head. The object slipped and the employee's left index finger became caught in a sliding channel. The finger was broken between the knuckle and the first joint.",1
"An employee was operating a forklift. The employee fell about 17 feet to the ground, suffered head injuries, and was hospitalized.",1
"An employee was operating a standup forklift in the warehouse. The employee was pinned between the forklift and a bollard, suffering a broken lower right leg.",1
An employee was changing out a laminate roll in the laminator machine when their arm was caught in the roller and fractured.,1
An employee was working in the maintenance shop. Their right index finger was caught in the belt and pulley of an exhaust fan and partially amputated.,0
"An employee was washing out a drum. After pouring it out, his left little finger was pinched and lacerated between the drum and a hopper.",1
"A sample probe became plugged with corn. Two employees began unclogging the corn in the probe. One of them went outside to the probe, then directed the other to open and close the probe, releasing the clogged corn. When most of the clogged debris had fallen out, she inserted her right index finger into one of the openings on the probe. The probe was turned on again and shut on her right index finger, causing a partial amputation.",1
"An employee was picking up an empty pallet with a pallet jack. His left foot was caught between the pallet and the jack, and the ankle was broken.",1
"An employee was leading cows toward the milk parlor when a cow backed up, crushing the employee's right index finger against a metal bar of the staging area. The finger was partially amputated.",0
"An employee fell from a second-story window and suffered a broken pelvis, a broken hip, and a puncture injury to the pancreas caused by the broken glass.",1
"While assisting a loaded forklift, an employee became stuck between the cage of the basket and a boom attachment for a forklift. The boom attachment slid forward, impacting the employee and resulting in a head injury.",1
"An employee stood in front of a patient with their hands under the patient's arms in order to lift them. During the lift, the patient pulled their feet up and grabbed the employee's neck causing injury to the employee's T1 and T2 vertebrae.",1
"An employee was on a roof with contractors getting estimates for roof repairs. The employee fell through the roof, struck an air compressor during the fall, and landed on a wooden pallet and the concrete floor approximately 20 feet below. The employee sustained broken vertebrae and a punctured lung.",1
An employee was driving a forklift when it tipped over. The employee sustained a fractured pelvis.,1
"An employee was repositioning an oil barrel using a drum positioner attached to a forklift. The employee's finger got caught between the barrel and one of the positioner tines, amputating the fingertip.",0
An employee was working on a header assembly above a 42-inch pipe. The employee fell from a ladder and suffered a broken left leg.,1
"On April 11, 2022, an employee was operating an electric double pallet jack in the dock area. He placed a pallet of frozen food products on the dock in preparation for shipment. As he drove away from the dock to get more product, his leg got caught between the side of his pallet jack and a pallet of frozen food products on another pallet jack that was driving toward the dock. The employee was hospitalized with a broken leg.",1
"An employee was adjusting a sensor on the snipping motor of an edge bander when his right hand contacted the snipping saw. He sustained amputations to the index, middle, and ring fingers.",0
"An electrical powerline crew was pulling in a neutral wire when it became bound up on a pole, causing the pole to pull over slightly before the pull was stopped. One of the employees went up in a bucket to try to free the neutral wire. While he was holding the wire with one hand, his shoulder contacted the bottom of an energized cutout directly above where he was working. He suffered a 7,400-volt shock that caused third-degree burns to the fingers on his left hand and his shoulder and was hospitalized.",1
"An employee was carrying auto parts on a pallet jack. The pallet jack ran over the employee's left big toe, amputating it from the nail up.",0
"An employee was walking in an aisle and went between two pallets. The employee tripped and fell over the pallet to the floor, sustaining a fractured left hip.",1
"An employee was performing routine maintenance on the discharge pipe attached to the chipper. The employee climbed onto the equipment using a ladder and was lowered to the ground using a bucket with a two-foot rim. While exiting the bucket, the employee tripped and fell head first onto the concrete ground. The employee sustained a skull fracture.",1
A skid steer operator was clearing some brush near a dry creek. The skid steer flipped over while backing down the bank of the creek. The employee sustained a concussion and back contusions.,1
"An employee was using a grade pole to measure the grade in a trench box. As the employee was pulling the pole out of the trench box, the pole was blown into an electric line by a gust of wind, causing the employee to be electrocuted. The employee was hospitalized.",1
"An employee was using a hoist to move a roll of mat facing into place above a conveyor. The roll was attached to the hoist with a hook that cradles a mandrel bar that passes through the core of the roll. While lowering the roll, one side of the roll contacted a fall protection railing. The employee then began to readjust the roll's position using the hoist pendant control while simultaneously guiding the suspended load with his left hand. The collar on the mandrel bar dislodged and the roll began to tilt and fall toward the conveyor. The mandrel bar closest to the employee swung up and pinched their left ring fingertip against the lifting hook resulting in partial amputation of the distal phalanx.",0
"A rural route mail carrier was delivering mail into a slot-style mailbox. As the employee drove away, the spring-loaded flap amputated her right index fingertip.",0
An employee was power washing an 8-foot high porch roof when he stepped back and fell off the roof. The employee sustained a fractured right femur.,1
"An employee was spraying texture material on a ceiling when his spray nozzle clogged. He was trying to clear it when it shot texture into his right ring finger below the second knuckle, lacerating it. He was hospitalized, requiring surgery to completely clean the wound.",1
"An employee was surveying a curb inlet in a designated parking lane when he was struck by a pickup truck. The employee sustained multiple fractures to his left ankle and shin, bruising, and bleeding to an eye.",1
An employee was doing a client's laundry. The employee slipped down the basement stairs while carrying a basket of clothes and hit her head and landed on her arm. The employee sustained a shattered wrist and required surgery.,1
An employee was operating a mesh cutting machine. A piece of mesh was rolling out of the machine and started to coil onto itself rather than coming out as a flat section. The employee was working to straighten the material to prevent it from jamming the machine when the machine amputated their middle finger between the fingernail and knuckle.,0
A temporary employee was on the second rung of a ladder installing a window on the third floor of a residence. The suction cups on the window failed causing him to fall approximately 10 feet. He fell through the scaffolding on the second floor and then rolled down the stairwell to the first floor. The employee sustained fractured discs and a fractured hip.,1
"An employee was transferring hot oil from one fryer to another to level out the oil in the fryers. While pouring oil, some of it hit the divider bar and splashed onto the employee's lower and upper right arm resulting in burns.",1
An employee had been mowing a lawn with a walk-behind mower. He put his hand underneath the blade as it was still running and multiple fingers were amputated.,1
"An employee was operating a powered industrial truck (PIT) to deliver a pallet. As the employee was reversing, the truck struck a guardrail which caused the employee to fall from the PIT and strike his head. The employee sustained a head laceration.",1
"An employee was waiting to sign out for the day when a contractor's employee knocked over a temporary fence while moving a boom and the fence struck the employee, causing him to fall to the ground. The employee suffered bruising and bleeding on the kidney.",1
An employee was bitten by an insect while stocking houseware merchandise. The employee developed bursitis.,1
"An employee was stripping a mold (removing product from the mold). In staging the part for stripping, the pusher and mandrel were misaligned which caused the tool to kick out, striking the employee in the chest. The employee sustained blunt force trauma to the chest.",1
"On April 12, 2022, an employee was walking into work through the main lobby, tripped on a chair leg and fell to the ground. The employee was hospitalized for a fractured left hip.",1
An employee moved a step-up bench from one area to another and then stepped on the bench. A leg failed causing the bench to collapse. The employee fell and suffered  broken ribs.,1
"An employee was unloading boxes on a roller tray table. The employee collapsed the roller section and it caught his right little finger, amputating the last joint of it.",0
An employee was drilling into rock when his thumb became caught in the drill bit resulting in an avulsion injury.,1
An employee was walking in the dock area to observe mail processing. The employee was struck by a powered industrial truck (PIT) and sustained a right foot injury.,1
"An employee was inspecting the underside of a range hood in a commercial kitchen. He slipped, stepped into an operating deep fryer, and suffered burns to the left ankle and foot.",1
"An employee was cleaning the loading dock floor and slipped. The employee then tripped on a ramp stand and fell from the loading dock to the parking lot surface approximately 5 feet below. The employee sustained contusions to his neck, legs, and back.",1
An employee was pulling the bed sheet under a patient to re-position the patient. This sheet released and the employee fell backward on the floor and sustained a broken hip and a broken wrist.,1
"An employee was walking across a parking lot when she fell, landing on the concrete and suffering a broken kneecap.",1
An employee was unbolting railroad ties when one of the ties under tension kicked back and struck the employee resulting in a fractured leg that required hospitalization.,1
An employee was operating a bread bagger when bread became jammed at the exit point of the bread slicer. The employee was pushing the jammed bread when the slicers amputated their left index fingertip.,1
"An employee had been working from a 12-foot step ladder. While descending the ladder, the employee lost his balance and jumped/fell from the fourth step up from the bottom. He landed on his right heel, fracturing it on the concrete floor.",1
"An employee fell through a floor hole cover on the third level of a building, landing on the concrete floor of the basement and suffering head trauma.",1
"On April 13, 2022, at around 1:00PM, an employee was on the incline feed belt of the conveyor sorting belt to remove a clog. The employee slipped when standing up and fell 16 feet to the concrete floor below, fracturing both wrists. The employee was hospitalized.",1
Two employees were moving fiber reels when a swarm of bees attacked them. Both were stung many times. One employee was hospitalized.,1
An employee was cutting 2x4 ledges when the circular saw kicked back and lacerated his left hand between the thumb and index finger.,1
"An employee was walking to the deli meat slicer, tripped, and fell to the floor resulting in a right hip and leg injury that required surgery.",1
"An employee was working on the breakdown mill at the calender. While trying to free rubber, the employee's hand became caught in the mill rollers resulting in an amputation.",0
"An employee was working on an amphibious assault ship. While exiting the work area, she was climbing over a chill water pump when her leg/foot got caught on the pump. She stumbled and struck her right lower leg/ankle against a steel cutout. The tibia and fibula were fractured where they connect to the right ankle.",1
"An employee had been feeding a hogger machine when it jammed. The employee then entered the machine and his arm became caught between two shafts, resulting in a crushing injury. The machine was not locked out/tagged out at the time.",1
On 4/13/2022 at 6:15 AM an employee was attempting to restart an air unit that was not blowing heat. The employee was manually moving the motor belt to turn the fan when the air unit reengaged and the belt amputated their left ring and little fingertips.,0
An employee was attempting to lower a dock leveler by pulling on the chain. The chain broke and the employee fell backward and hit his head on the concrete floor. The employee sustained a head injury.,1
"An employee was in the hold of a vessel during pulp discharging, trying to hook a spreader bar onto wood pulp. The crane gave slack and the spreader bar came down and pinned the employee resulting in fractures to the scapula and ribs.",1
An employee stepped out of a delivery truck and sustained a fractured femur.,1
"An employee was training another employee on operating a brake press. The press was activated while an employee's right hand was at its point of operation. It crushed three fingers on their right hand, and the employee was hospitalized.",1
An employee was cutting wood on a table saw and suffered an amputation to their left index finger.,1
"An employee had been painting with primer. A torch was lit by a general contractor and caused fumes from the primer to ignite. The employee saw a bucket of primer was near the fire. He grabbed the bucket, not knowing the bucket of primer was also on fire. The employee was then lit on fire, sustaining second degree burns to 60% of his body.",1
An employee was hanging a ladder on the side of a cart when the ladder dropped and pinched their right little finger resulting in a fingertip amputation.,1
An employee fell approximately 13 feet from a ladder and suffered an arm fracture that required hospitalization.,1
Employees were working to drain condensate in a dead-leg tee on the compressed air header in preparation for hooking up a rental compressor to the header. Employee 1 opened the isolation valve to drain the tee and the butterfly valve opened more than expected. The disconnected 3-inch hose at the end of the line began whipping around and the fitting on the end of the hose struck Employee 2 in the lower right leg resulting in a compound fracture.,1
"An employee was inspecting a forklift with a steering malfunction. He removed the metal inspection cover. The drive unit dislodged, causing the forklift to lurch and drop on the employee's foot. He suffered partial amputations to his big and second toes.",1
"An employee was cleaning a clogged drain with an acid drain cleaner. After the employee poured in the cleaner, there was a blast and the employee was exposed to acidic vapors. The employee suffered chemical burns to the throat and skin.",1
An employee was feeding rolls of raw material through a roller when his arm was caught in the equipment and lacerated.,1
"In the feedwater basement, an auxiliary pump had been put into place for temporary drainage into an approximately 20-inch-deep trench. The grate guarding the trench was askew to allow the hose to feed under the grate and into the trench. An employee tripped on the 1.5-inch discharge hose from the auxiliary pump. This caused the grating to dislodge, allowing the employee's foot to submerge into 180 to 190 °F wastewater in the trench. The employee sustained second-degree burns to the lower left leg.",1
"An employee was attempting to load a spool into a machine. He was trying to align the drive lugs with his left hand, working the controls with his right hand, when the machine caught his left glove. His thumb was pulled into the arbor housing. The tip of the thumb was amputated.",0
An employee was cleaning the underside of a moving conveyor when their hand was pulled between the conveyor belt and tensioning roller. The employee was hospitalized with hand and wrist injuries including a fracture and dislocation.,1
"On April 14, 2022, an employee was struck by a technician who fell through the ceiling into the meat department. The employee sustained a concussion.",1
An employee was struck by a moving cart.,1
"An employee was taking gas readings on a natural gas line during pigging operations. Natural gas escaped around the pigging device as it traveled down the pipeline. The pig was being propelled by the flammable gas to the end point where the work-site was located. When the pig reached the end point, back pressure propelled the pig out of the line causing a spark that resulted in a flash fire produced by the natural gas that had escaped from the line. The employee was hospitalized for second and third degree burns to the hands, face and neck.",1
"An employee was painting the outside of a building from ground level. The employee tripped on a pallet, fell to the ground, and suffered a broken hip.",1
"An employee was painting a bollard in a parking lot. He tripped as he stood up, fell to the ground, and suffered a fracture to the ball joint of the left hip.",1
"An employee was clearing out a line when 4-tert-butylphenol (TBP) spilled onto the employee. He sustained chemical burns the head, face, eyes, and also suffered respiratory distress.",1
An employee's right thumb was caught in a trailer door as it closed. The employee suffered an amputation to the thumb tip.,0
An employee was working on a piece of equipment and used his legs and chest for support. The employee experienced chest pain and breathing issues and was hospitalized.,1
"An employee reached inside a machine cap feed though the top of a machine. The conveyor belt caught the employee, causing an amputation to the employee's left index fingertip.",0
"On April 14, 2022, an employee was backing up a sit-down forklift carrying six stacked pallet boxes. Two of the boxes toppled over the top of the forklift and fractured the employee's right wrist and fingers.",1
"On April 14, 2022, an employee was using a handheld grinding wheel to cut hinges off a metal cage. He was holding the cage's lid up with one hand. After he cut through the hinges, the lid fell and amputated his right little finger.",1
"An employee was setting up a lighting scene for a movie in a park. He was jumping across a creek about 6 feet wide when his feet sank in the mud and he fell over, breaking his left fibula and tibia.",1
An employee had just loaded a sport utility vehicle onto a trailer when he fell. He landed on the ground about 5 feet below and suffered a broken elbow.,1
An employee tripped on a raised divider and fell while walking around her vehicle. She suffered a broken leg.,1
An employee was cleaning a cryogenic deflasher and preparing to shut it down. The employee was reaching into the hopper when their right index finger was caught by the auger and the fingertip was amputated.,0
An employee was feeding material into a rotary cutter. His hands were pulled in and he was hospitalized for 9 finger amputations.,1
"On April 14, 2022, a three-person team was working to remove the top and bottom molds from a casting. As one employee was trying to open the clamp holding the molds together, a second employee began to remove the top mold using a crane. The first employee's left ring finger was caught between the top mold and one of the clamps, causing a partial amputation to the fingertip.",0
"During an altercation, an employee was stabbed in the back of the right leg with a pipe fabric cutter. The employee suffered a 3-inch laceration.",1
"An employee was using a metal stamping machine to bend steel. During one of its revolutions, the machine smashed the employee's fingers, causing the amputation of four fingers on his left hand.",1
"On April 14, 2022, at 11:40 PM, an employee was unwrapping cure tape from a completed hose after vulcanization. The cure tape pulled on round tubing and degloved the employee's right middle finger resulting in distal amputation of the finger.",0
"An employee was blending a batch of chemicals, including toluene, in a 6,000-gallon vessel. He was exposed to the chemicals and suffered burns to the hands and face.",1
"On April 14, 2022, at approximately 12:00 p.m., an employee was working in the compressor room of the facility to repair/replace the hot bypass valve of an air dryer used to dry compressed air used throughout the facility. The employee was using a torch to desolder the connection(s) of the hot bypass valve when an explosion occurred. Bits of copper shrapnel were generated by the explosion and struck the employee on the top of the right thumb and thigh above the right knee. The employee was hospitalized.",1
"An employee was standing on a top stock cart, reaching for a box. The employee fell to the floor about 2 feet below and suffered a broken hip.",1
"An employee was grabbing a dish behind a dishwasher. The dishwasher's moving rotator belt caught the employee's left hand, amputating a fingertip.",1
A temporary employee was using a weed eater when he tripped over it and fell. He suffered back injuries.,1
An employee was using a hydraulic impact driver to remove an 80-pound clevis pin from a piece of machinery. The employee's finger was crushed by the clevis pin resulting in a fractured fingertip.,1
"At 2:30 p.m. on April 15, 2022, an employee was working under a school bus when a piece of metal fell into his eye and lacerated it.",1
An employee was checking fertilizer levels from the top of a tendering trailer. The employee fell off the trailer from a height of about 7 feet and suffered broken ribs. He was hospitalized.,1
An employee was splicing an overhead conductor. Hydraulic fluid came out of a pinhole in a hose and punctured the employee's abdomen.,1
An employee was walking around an aircraft fuselage (not a complete aircraft) when they tripped over a T-pin lanyard and fell onto the fuselage stand. The employee sustained a fractured hip.,1
"An employee was repairing a hydraulic leak on the valve block of a skid steer when the cab of the skid steer fell on the employee, resulting in a lower back injury that required surgery.",1
"An employee climbed onto a shelf to get a box, then fell off the shelf to the ground. The employee suffered a broken hip.",1
A dock door was being raised when its 2-by-8 wooden header fell and struck an employee's head. The employee suffered broken vertebrae.,1
An employee was in the back of the facility shutting down an air compressor when they tripped over the compressor drain pipes and fell onto the air compressor pipes. The employee was hospitalized.,1
"An employee was involved in repacking a pump in the pulp mill and had been monitoring/adjusting the seal water and packing gland for proper flow and gland leakage. As the employee turned and walked away from the completed job, the packing sleeve lost its fit to the hub/shaft and blew out of the packing box causing hot wheat black liquor (approximately 197 degrees) to spray onto the employee's back resulting in second degree thermal burns. The employee was hospitalized.",1
"An employee was using a hoist to lift a piece of equipment from the first floor of the prechill room to the second floor through a section of grating on hinges in the floor about 3 ft. by 6 ft. After the piece of the equipment had been lifted through the hole, the employee fell through the open space onto the floor 12 ft. below and suffered multiple fractures.",1
An employee was operating a tire machine to de-mount a tire and sustained a fingertip amputation.,0
The employee was mounting a tire on a tire machine when the bead break wheel pinched his finger against the tire resulting in amputation of the right middle fingertip.,1
An employee was paving a section of roadway when a passenger vehicle entered the work zone and struck the roller the employee was operating. The employee was ejected from the equipment and suffered a broken clavicle and a brain bleed.,1
An employee was carrying an armful of vehicle chassis parts. The parts shifted and one of them deeply lacerated the employee's left forearm.,1
"An employee was riding a tricycle in a paper handling area in a building. After the tricycle's back wheels rolled over an empty pallet, the employee fell off and suffered a broken left hip and an injured left elbow. The employee was hospitalized.",1
An employee was operating the chunker when dough piled up underneath the chunker. The employee started to remove the dough when his hand got caught between the belt and the cutter on the chunker. The employee sustained an amputation to the right thumb.,0
"An employee was looking for tools in the drawers of a table. The table fell forward, and hot grease on top of it burned the employee's arms.",1
An employee was cleaning an auger when it amputated the employee's left middle finger.,1
An employee was cleaning a shrimp sear plate when it fell off the cooler. The employee tried to catch it and his hand was crushed under the plate. The employee sustained fractures to four fingers on the right hand.,1
"An employee was slipped and fell in a parking lot, breaking her right hip.",1
An employee was cutting 2-by-4 lumber with a chop saw. The saw amputated one finger from the employee's left hand and cut two other fingers.,1
An employee tripped over plexiglass lying on an office floor. The employee fell and suffered a hip injury that required hospitalization and surgery.,1
"An employee was about to service a side boom pipe layer. After starting it and letting it warm up, he dismounted it and went to the rear of his mechanic's truck. The pipe layer moved forward and caught the employee against the side of his truck. He suffered a broken pelvis.",1
Employees were installing well head equipment. An employee's left middle finger was caught between a bolt and a flange that was being installed. The finger was amputated.,0
"An employee was purging the air from a filter vessel. The job assembly became unscrewed. While trying to stop it, the employee suffered a laceration causing muscle damage to the palm of his right hand.",1
"At about 11:20 a.m. on April 16, 2022, an employee was using a wrench to tighten a polish rod at an oil well head. The wrench slipped off the collar. As the employee reached behind the wrench to replace it on the collar, the stuffing box slid down, trapping the employee's right index finger against the wrench. The fingertip was amputated near the nail bed.",0
An employee was moving a stabilizer with an overhead crane. He set it down on the concrete and moved to remove the slings. The stabilizer rolled over onto his boot. He was trying to stop the stabilizer from rolling when its blade amputated the tip of the employee's right middle finger.,0
An employee had a heart attack after fighting a controlled forest fire.,1
"An employee had been laying brick. The employee fell approximately 18 feet from a frame scaffold to the ground, fracturing their left ankle.",1
"An employee was troubleshooting a yarn breakout. The employee's fingers were caught in the rollers, which caused amputations to the employee's fingers.",0
An employee was guiding lumber into a saw when her right little finger got caught in the chain that pulls the wood into the saw resulting in a fingertip amputation.,0
"An employee was standing on the back of a flatbed tailgate, throwing trash into a dumpster. The employee fell off the tailgate and landed on their hip and ribs sustaining three fractured ribs and a collapsed lung.",1
"An employee used a bridge crane to place a 12-foot long piece of bar stock onto a portable roller stand and a fixed roller table. The employee then disconnected the bar stock from the crane and began moving it along the rollers. The portable roller stand was not perpendicular to the bar stock, causing the bar stock to roll off the side. The employee put their hand out to direct the bar stock away from himself as it fell to the floor. His right middle fingertip was pinched and amputated between the bar stock and the fixed roller table.",0
"An employee was operating a forklift when it swung around and hit the clamper, fracturing his right leg.",1
An employee was cutting metal hoods with a radial arm saw when one of their fingertips was amputated and a finger on their left hand was cut.,0
A hose spraying hot water burst and the hot water splashed onto an employee causing burns to their lower body.,1
An employee was walking across a snow covered lawn to deliver mail when she slipped on a small hill and fell on the ground. The employee sustained a fractured tibia and fibula.,1
An employee was walking up a jetway after exiting an aircraft when they felt a sharp pain in their lower back and they collapsed to the floor. The employee sustained a herniated disc that was compressing on the sciatic nerve.,1
"On April 18, 2022, at 4:15 PM, an employee was operating a standup forklift in the warehouse when it collided with another forklift. The employee's leg was caught between the two forklifts resulting in a broken leg and ankle.",1
"An employee was working around a shallow pit of carbon black. The employee slipped on carbon black residue and lost his balance. To avoid falling face first into the pit, he jumped in. He was submerged waist deep, and the hot carbon black burned both his legs. He was hospitalized.",1
"A load securement strap on a flatbed trailer was being loosened when the load of pipes shifted and fell on an employee. The employee was hospitalized with fractures to the jaw, shoulder, ribs, and femur.",1
An employee was troubleshooting a pin setter in a bowling alley. The employee suffered a crushed right ring finger.,1
An employee was cleaning a drill press when it amputated their left index finger.,0
An employee missed the final step coming down off a ladder and fell to the ground fracturing her left wrist.,1
An employee's right index finger was partially amputated.,0
An employee was stung by a flying insect while walking though the resort complex. The employee had an allergic reaction.,1
"An employee was descending the boarding ladder of a fighter airplane. He fell, landing on the pavement about 5 feet below and suffering a broken left leg and a dislocated left knee. He was hospitalized.",1
An employee was working on a dehydrator circulation fan that was moving due to centrifugal force. The employee attempted to stop the fan with a wrench. His hand was forced into the framework resulting in a partial amputation to the right middle finger.,1
"While retrieving materials for baking from a freezer, an employee fell on the floor and fractured their left ankle.",1
"An employee was using a ladder to put away stock items. The employee fell from the ladder to the floor, suffering broken ribs and a head laceration.",1
"While picking up towels around a pool deck, an employee tripped over a lounge chair and fell on the concrete pool deck. The employee's right hip was injured.",1
"Three employees were installing a section of underground cable. The capstan was engaged to pull in the steel cable with a nylon rope. One of the employees had his left hand on the capstan when the switch was toggled, and his ring finger was pinched between the rope and the capstan. He suffered an amputation to some flesh and the nail.",0
"An employee was using a crane with a C-hook to move a coil so it could be mounted to a machine. During the lift, the employee's hand was crushed by the handle on the C-hook, resulting in a fingertip amputation.",0
"An employee was descending a ladder. The ladder tipped and he fell to the concrete floor, landing on his right elbow and breaking it.",1
"On April 18, 2022, an employee was unloading cut lumber from a straight-line rip saw. His right hand was caught in the chain at the rip saw's off-bearing end. He suffered a partial amputation to the ring finger.",1
"An employee was moving a scaffold plank from a scaffold outrigger. The employee fell 14 feet, landing on the ground and suffering a broken left humerus.",1
An employee was using a bandsaw to cut saddle packs.  The blade amputated the tip of his right ring finger.,0
An employee was on a ladder trying to access an interior control valve for a steel tank. The employee lost balance and fell 5 feet to the ground. The employee was hospitalized with a fractured left arm.,1
"An employee was delivering equipment with a truck-mounted forklift. The forklift tipped forward, causing the employee's left knee to contact the steering wheel post, resulting in a deep laceration to the employee's knee.",1
An employee climbed onto a conveyor to dislodge a piece of lumber. The employee kicked the wood and his foot became caught in the conveyor's chain and sprocket resulting in the amputation of three toes from the left foot.,1
An employee tripped and fell in a patient's room resulting in a crushed hip socket.,1
"An employee was driving a lift when it struck another, parked lift. He suffered a compound fracture to the lower left leg.",1
An employee was cleaning a metal conveyor belt with a paper towel when her right index finger was caught in the conveyor and lacerated. The conveyor was running at the time.,1
"An employee was setting up a nail making machine, changing out the carrier block bolt. The employee bent down to check the gripper pin. The jog button was actuated and their left index finger was caught in the head roller resulting in a fingertip amputation.",0
An employee was descending a ladder. He fell backward off the first step and landed on the ground sustaining a fractured left wrist.,1
"At about 3:30 p.m. on April 19, 2022, an employee was butterflying a filet with a steak knife. The knife lacerated his left index finger and he was hospitalized, having suffered nerve damage that required surgery.",1
"An employee was grabbing a package from the back of the truck, slipped off the bumper and fell resulting in a broken elbow.",1
"An employee tripped on the corner of a crate in a supermarket display. He fell to the floor, landing on his left hip and breaking it. He was hospitalized.",1
"An employee was attacked by a customer while pumping gas. He fell and his head struck the sidewalk, causing a head injury.",1
"An employee was operating an industrial mixer and attempting to break free bridged off powder in the conveyor. The powder broke free, and the employee's right thumb was caught between conveyor and housing resulting in amputation through the first distal phalanx.",1
"A temporary employee was transitioning from one supersack to another supersack inside of a hopper barge. During the transition, his foot became caught in one of the lifting eyes of the first supersack. As a result, he lost his footing and fell. The employee sustained a fractured ankle.",1
"An employee was getting up out of a wheelchair when he got caught up and fell into a shopping cart corral, injuring his right arm and shoulder. The employee was hospitalized and required surgery.",1
An employee was standing on the forks of a forklift to unhook a load secured in the back of a truck. She fell off the forks and suffered a broken left leg.,1
"On April 19, 2022, an employee was leaning against a service desk. He turned around to answer a customer's question, lost balance, and fell to the floor. The employee was hospitalized with a fractured shoulder and hip.",1
An employee tripped while walking across a dining room. The employee fell to the floor and suffered a broken femur.,1
An employee was cleaning the floor with a broom. He bent down to get something off the floor and placed his left hand on the guard of a screw conveyor. The guard of the conveyor was rotted; the employee's left index finger went through the guard. The conveyor cut their finger resulting in partial amputation above the fingernail.,0
"An employee was walking to the guest reception table inside the restaurant when she tripped and fell on the floor. The employee sustained a fractured right hip, a sprained right knee, and a bruised right elbow.",1
An employee was performing an X-ray using portable equipment. She tripped over the equipment and fell to the ground sustaining a fractured humerus and a dislocated elbow.,1
An employee was watching as a grease bin was filled. The employee was overexposed to carbon monoxide from an idling forklift.,1
"An employee was unloading a cylinder supply trailer. The base of the 160-pound gas cylinder was sliding across the trailer floor. The employee tried to stop it and their finger got caught between the base and a cradle stand for the cylinders, resulting in a fingertip amputation.",0
An employee was operating a forklift outside in the garden center. The forklift went between two bollards and his left foot was caught between a bollard and the forklift. The employee sustained a deep laceration to the side of his foot and the little toe was medically amputated.,1
An employee fell off an A-frame ladder while using a nail gun. His leg was caught between the rungs and broken.,1
"An employee was working on an A-frame ladder while nailing framing when they fell off the ladder and their leg got caught between the rungs of the ladder, resulting in a broken leg.",1
A casing swage (weighing approximately 50 pounds) was being installed to a joint of casing in order to circulate drilling mud through the casing. The swage was approximately 40 feet in the air when it came free and fell striking an employee in the hard hat. The employee sustained a skull fracture.,1
"An employee was cutting material with a circular saw. The saw cut the tips of the employee's fingers, causing an amputation and injuries requiring stitches.",0
Concrete fell on an employee's left foot.,1
"An employee was cleaning inside a blender drum. The employee came out of the drum and took the pin out of the drum to reposition it. While manually turning the drum, the employee's left fingertip was caught between the belt and pulley and amputated.",0
"An employee was transferring rolls of insulation from a loft platform to a truck. A guardrail broke and the employee fell to the ground about 10 feet below, suffering a broken leg.",1
An employee was cleaning a saw with a water hose. The handle of the hose caught in the sawblade and the employee's hand was drawn into the blade resulting in amputation of their right middle finger at the first knuckle.,0
An employee entered the side of a machine near the feed system. The feed system access door had been removed to install a window into the door and the interlock system had been bypassed. As the employee was clearing a misfeed and adjusting the feed arm the feed tray system activated catching the employee's head between the feed arm and feed tray causing a crushing injury.,1
An employee was descending a ladder when it slipped out from under him. He fell and suffered a severe pelvic fracture.,1
"An employee was running a self-feeding poly rod into a centerless grinder. A splash guard fell; as the employee was trying to catch it, his right ring finger was caught between the rod and the grinder and amputated.",0
"An employee was operating a compact skid steer through the mud room and observed salt cakes in the area. The employee poured water collected with the Bobcat onto the salt cake which caused an explosion. The employee sustained first, second and third degree burns to right and left hand/wrist. The employee also sustained burns to the face, a fractured nose, and a forehead laceration.",1
"An employee was cutting up scrap metal. As he began to cut a hydraulic cylinder, the residual hydraulic fluid heated up, splashed back, and burned his face and arms.",1
"An employee tripped and fell to the ground, suffering a broken hip.",1
"An employee was changing a hub and spindle on a hay elevator. The elevator fell over and landed on the employee, who suffered a punctured lung and fractured ribs.",1
"An employee was driving an excavator over a ditch when the excavator flipped and the employee tried to jump out of the excavator. The employee's foot was crushed by the excavator cabin, resulting in the amputation of five toes.",1
"While entering a facility, an employee tripped on a curb and fell to the ground. The employee suffered broken ribs and was hospitalized.",1
An employee was moving an 8-foot fluorescent bulb container from a pallet to enter a processing room. He tripped while walking backward and fell to the ground breaking his left femur.,1
"An employee was moving a test bar containing iron that wasn't solidified. The test bar contacted the employee's right hand resulting in second and third degree burns to their hand, fingers, and wrist.",1
"An employee had just set a wooden pallet down with a powered industrial truck. The truck was backing up when it struck a stack of wooden pallets. One pallet broke and a piece entered the cab of the industrial truck, striking the worker in the back of the left leg.  Wood was embedded in the back of the employee's left leg.",1
"An employee picked up a sheet of aluminum plate with a crane to load the sheet onto a plasma cutting table. The employee climbed onto the table to remove a bow from the plate so it could be laid down flat. The plate was leaning over-center away from the employee. He put his foot on the bottom edge of the plate, at the bow in the middle of the plate, and then directed the crane toward himself. The chain hook holding the plate grab turned past 90 degrees, damaged the crane hook clasp, and pulled the plate grab handle out of the crane hook, causing the plate to fall. The employee saw the plate falling and tried to jump off the table. The plate hit him, pinching his left leg on the table and fracturing it below the knee.",1
An employee was removing a tarp from a trailer when they slipped off the ladder and fell 4 to 6 feet to the ground. The employee was hospitalized with a skull fracture and concussion.,1
"An employee's hand was caught between a belt loader and offloading machines, resulting in a crushed middle finger.",1
An employee was standing on a paver testing for stability. The paver gave way and the employee fell and fractured their hip.,1
"Two employees were installing a belt in a pump motor's belt and pulley system. When the pulleys were rotated, one employee's right ring fingertip was caught by the belt and pulley and amputated.",0
"An employee's hammer slipped and struck his leg, causing a hematoma. He was hospitalized.",1
An employee was filling a ride-on spreader/sprayer with liquid herbicide and driving to the other side of lawn care truck to fill it with granular fertilizer. The employee's left middle finger was jammed in the door jam of the truck resulting in a partial amputation.,0
"April 20, 2022, an FBI agent was questioning people in a deli when one of them shot the agent in the lower abdomen.",1
"At about 11:00 a.m. on April 20, 2022, an employee was operating a bar turner machine. As he was closing the shield that covered the machine's spinning cutting heads, it caught his index finger. Part of the finger was medically amputated.",1
"At 11:33 a.m. on April 20, 2022, an employee was using a forklift to load freight onto a trailer, a small 26-foot box with a roll-up door. The door had fallen slightly when the employee was trying to get into the trailer, and he had pushed it up. While he was in the trailer on the forklift, the door lowered again. As the forklift was backing out of the trailer, the employee reached up from the forklift to push up on the door. The forklift moved backward at the same time, rising as it moved onto the ramp. The employee's hand was crushed between the metal frame at the top of the forklift and the metal frame of the trailer.",1
An employee was loading racks. The employee's right hand was caught and lacerated by a piece of powered equipment and the racking system.,1
An employee was cutting a piece of sheet metal using a shear cutting machine. The machine's clamping bar came down on the employee's middle finger amputating it.,1
An employee was stepping off a lift and onto a roof. He stepped on a glass panel and fell through the roof a distance of roughly 20 feet. The employee sustained injuries to his back and legs. The employee was wearing fall protection but it was not connected to an anchoring point at the time of the fall.,1
"An employee was driving a rider pallet truck around a corner. A forklift was stopped at the opposite side of the intersection with a pallet of chicken meat on its forks. The employee jumped off the pallet truck as it stopped, and his right foot was caught between the platform on the pallet truck and the wooden pallet on the fork truck. The ankle was broken.",1
"An employee was moving cattle. The employee was pinned between a steer and a gate, suffering a crushed hip.",1
An employee was testing electrical equipment. He contacted a power source and suffered an electrical shock and burns.,1
"An employee was working at the outfeed side of a winder machine. As he was making a cut with a box knife under an 18-inch drive roller, he was caught between the large drive roller and the small drive roller. His right arm was pulled in up to the shoulder. He suffered broken ribs and a punctured lung.",1
"An employee was loading parts into their vehicle when they tripped and fell to the ground, resulting in arm and shoulder injuries.",1
"An employee was cutting roast beef on a slicer. While the employee was pushing the meat forward, the blade cut the employee's right index finger, causing an amputation without bone loss.",0
"An employee was descending the stairs of a parking garage to retrieve a corporate vehicle when she fell, resulting in a dislocated ankle and a broken fibula and tibia.",1
"An employee was closing the security gate to the yard at the end of his shift when his left ring finger contacted the roller on the upper rail of the gate, resulting in a fingertip amputation near the nail bed.",1
An employee was cutting wood on a table saw. The saw cut his fingers. Half of one finger was medically amputated.,0
Two employees were involved in an altercation. One of them was pushed to the concrete ground and suffered a head injury causing a brain bleed. He was hospitalized.,1
"An employee was pulling a bifold door from an aisle in the warehouse. While transporting the door to another location, the door slipped, cut his right hand, and hit his left ankle, causing it to swell. The employee sustained a broken left tibia.",1
"An employee was on a 6-foot ladder, removing elevator wall covers in a service elevator. He reached over sideways from the ladder to remove a cover and fell approximately 4 feet from the ladder. The employee sustained injury to their back and knee.",1
"An employee was moving from a single-story roof onto a ladder. He fell from the roof to the ground about 17 feet below, suffering a back injury that required surgery.",1
"While walking through the store, an employee tripped and fell striking his head on a nearby shelf. The employee sustained a possible concussion and a torn ear that required sutures.",1
"An employee was throwing a piece of steel into a dumpster. His thumb was pinched between the dumpster and the piece of steel, and the top of the thumb was amputated.",0
"An employee was replacing light fixtures in a hospital setting. After replacing a fixture, the tried to reconnect the circuit and was shocked. He suffered burns to the right index finger and thumb.",1
"An employee was removing metal strapping from a disassembled air-controlled valve when the valve closed and caught the employee's left index finger, which had to be medically amputated.",0
"A temporary employee was operating a brake press. When the machine cycled, the part being bent pinned the employee's finger on the surface in front of the brake press and his pinky fingertip was partially amputated.",0
"The counterweights on a crane had come out of the sleeve. An employee got the counterweights back in and was manually putting the limited movement chain back on the sprocket when it slipped, pulling their hand between the chain and sprocket. The employee sustained an amputation to the left index fingertip.",0
"An employee was working on a forklift when the forks and carriage fell on him, striking his hip/pelvis and resulting in an injury.",1
"An employee was unstrapping a load of steel pipe on a truck. The load shifted and his left hand was caught between two of the pipes. His wrist and hand were broken, and the skin was degloved a third of the way up his forearm.",1
"An employee was offloading plumbing pipe from a truck. The cart carrying the pipe slid off the truck's lift gate and fell on him, causing internal crushing injuries. He was hospitalized.",1
"An employee was on a platform, trying to fix a pulley belt in a dust cyclone. As he tried to stop the belt, it pulled in his hand, causing the amputation of the tip of his right little finger.",0
An employee was using a manual paper cutter when it amputated the tip of his left thumb.,0
"To asses a breaker space, an electrician removed a panel cover, then the breaker cover. When he pulled the cover off, the breaker bus extensions were pulled down, causing a phase-to-phase arc fault. The employee suffered electrical burns to his left hand and the fingers on his right hand.",1
"An employee was trying to remove a jammed board on a board line. His hand/arm became stuck in an idle roller on the conveyor belt, and his wrist was broken.",1
"An employee was moving a stack of pallets into a trailer using an unpowered pallet jack. There were two stacks, side by side, in the trailer. The right stack had three pallets on top that were not perfectly aligned with the rest of the stack. As the employee was pushing the left stack into position next to the right stack, the three pallets on the right stack caused the top three pallets on the left stack to tip over. The employee suffered a half-inch soft tissue amputation to the right middle finger.",0
"An employee was operating a powered pallet jack in a back room. While he was trying to retrieve some product, his thumb was lacerated between two pallet jacks. He was hospitalized, requiring surgery.",1
"An employee was trying to straighten a piece of corrugated box material. The employee's finger was caught under an automatic clamp bar and the bale moved, causing the amputation of the employee's left ring fingertip.",0
An employee cut his left wrist with a utility knife while sorting wire. He was hospitalized.,1
"An employee was testing a panel with a test machine. The configuration of the panel resulted in the testing equipment applying an unexpected voltage to the panel. The employee's hands made contact with conductors that were not expected to be energized, resulting in a shock of 277 volts. The employee suffered burns to both hands.",1
"An employee was digging an excavation to uncover a cut fiber optic cable. The employee climbed into the excavation when it collapsed onto him, resulting in hip pain.",1
"An employee was sweeping chips off a component when he fell and contacted the component, resulting in a laceration to his hand.",1
An employee was changing the spring brakes on a semi-truck when a pin came loose from the brake assembly and crushed their left index finger. The fingertip was amputated.,1
"At the end of their shift, a shuttle lift (gantry crane) operator was descending the shuttle lift via the equipment ladder. While stepping from the third to last rung, the employee missed their footing and fell approximately 3 feet onto metal plates, landing in a sitting position. The employee sustained a fractured lumbar vertebra.",1
An employee was trying to unjam an extrusion machine. A running saw blade amputated the employee's left thumb and index finger.,0
An employee was racking products. The employee's little finger was crushed between a pallet jack and a structure. The employee suffered broken bones and damage to the fingertip.,1
"An employee was operating a pallet jack, selecting cases from a pick slot. The employee lost control of the pallet jack and his right ankle was caught between the pallet jack and a wall. The employee was hospitalized with a fractured ankle.",1
"On April 22, 2022, an employee was climbing a tree for removal when his safety lanyard and rope disconnected from the tree. He fell, suffering spinal fractures in the middle lower back as well as injuries to the lungs and spleen.",1
"An employee was riding in the back of a trailer being pulled by a cart. The employee had his hand on top of a clothing rack to stabilize it while the vehicle was in motion. When exiting the underground parking garage, the employee's thumb got caught on the top of the exit, resulting in the amputation of the tip of his left thumb.",0
"An employee was descending a 30-foot ladder and slipped, falling approximately 5 feet to the ground. The employee sustained fractured vertebrae and a fractured ankle requiring hospitalization.",1
"An employee was standing on a 4-by-8 wooden pallet on the forks of a forklift, elevated to the second level of a rack. While pulling a cabinet off the shelf, the employee fell. He landed on the floor 7 or 8 feet below and suffered an injury to his heel.",1
"At about 7:30 p.m. on April 22, 2022, two employees were trying to start a compressor. The compressor started after several attempts, but then continued to speed up. Its flywheel came apart and launched shrapnel, some of which struck one of the employees. He suffered lacerations and broken bones in both hands, the right shoulder, and the left thigh. He was hospitalized.",1
"A worker was inflating a tire on a pickup truck. The tire exploded, causing an injury to his left ear and pushing him back. The back of his head struck the truck's undercarriage and he lost consciousness.",1
"An employee was pulling orders when a chain popped off the end of a bundle of pipes. The bundle rolled down and landed on his leg, crushing it. He then fell back and hit his head on the material behind him. He was hospitalized, requiring surgery.",1
"An employee was servicing a stretch wrapper machine. The employee checked the chain tension of the machine after servicing and their right index finger became caught in the chain, resulting in a fingertip amputation with no bone loss.",0
"An employee was unclogging a corn sifter. When the clog was removed, the sifter rotated and its blade caught the employee's left hand, causing abrasions and cuts to the hand and fingers.",1
"On April 22, 2022, an employee was moving a 120-gallon propane cylinder when he fell backward, landing on concrete and suffering a broken left hip.",1
Employees were doing maintenance work on belts. An employee tried to step over a chain while it was being used to tighten the slack on a belt; the employee fell to the ground and suffered a collapsed lung.,1
"An employee cut the banding from a unit of wood and some of the wood fell on his left leg, resulting in a fractured shin.",1
"An employee was traveling down an aisle on an electric pallet jack. As he turned left into another aisle, his right ankle was crushed between a metal dock bumper and the pallet jack's platform.",1
"An employee was blowing sawdust off a CNC router with an air hose. The hose became entangled in a moving part of the router's table. While the employee was trying to untangle the hose, his right index finger was caught between the table and a fixed part. The employee underwent a medical amputation of the finger.",0
"An employee was replacing lightening arrestors on a transformer. While bending over, a gold necklace contacted live electrical components and an arc flash occurred. The employee sustained burns to the head, face and neck.",1
"An employee was walking down stairs with a tray of sandwiches. The employee fell, suffering five fractures and four dislocated bones in her left foot.",1
"An employee was diagnosing a leak on a frac pump. A 2-inch hose separated, and the employee fell backward. His right leg was caught between the railing and the fluid end and was broken above the ankle.",1
"On April 23, 2022, at 5:30 a.m., an employee and a co-worker were removing and replacing a brass ring around a slide plate screen changer after hot molten plastic began leaking around the screen changer unit. During the process, the slide plate cylinder closed on the employee's left hand, resulting in an amputation of their thumb and surgery for additional hand injuries.",1
"An employee was lifting two large steel plates with an overhead crane and guiding them both with his gloved left hand. The employee's left middle finger was caught between the steel plates, resulting in a fingertip amputation.",0
An employee was using a handheld grinder when the grinding disc failed and shrapnel from the disc lacerated his left forearm.,1
"An employee was putting a tarp over a leak in a concrete roof. The employee fell through the roof to the floor 32.5 feet below, suffering a broken collarbone and leg, as well as a spinal injury that required a pin.",1
"An employee was leaving work when their shoe got caught on a floor rug in front of the automatic double door and they fell, resulting in a dislocated left shoulder.",1
"An employee was installing antennas on the mast of a trailered boat. The employee was standing on a 6-foot A-frame ladder on the boat's platform when they fell 18-20 feet to the concrete surface beneath the boat, resulting in a fractured skull, a broken nose, and a fractured femur.",1
"An employee was operating a pan scraper when its left front tire hit a 3-foot-wide, 11-inch-deep hole. The top of his head struck the cab roof and his face struck the steering wheel. He suffered a bleeding cut to the head and a bloody nose.",1
"On April 22, 2022, at 2:00 a.m., an employee was selecting products to create a pallet while operating a front rider pallet jack. The employee tried to step off the pallet jack while it was still moving when it struck their right heel, resulting in a broken right ankle.",1
"An employee climbed onto a grill to remove the hood filters. He slipped off the grill, and his right hand contacted the hot grill plate and was burned.",1
"An employee was climbing into a refrigerated semi-trailer. The employee fell, landing on the ground and suffering a broken wrist that required surgery.",1
An employee was cutting an orange with a knife. The knife lacerated his finger and he was hospitalized.,1
"An employee was placing a bucket of chicken inside a cart to keep the chicken cold when one of their right hand fingers was pinched between the bucket and cart, resulting in a laceration. While the employee was washing the cut, they fainted and fell backward, striking their head on the floor and potentially resulting in a head injury.",1
"On April 24, 2022, an employee was operating a deck lid on a mold machine. The employee was attempting to remove a piece of rubber that was stuck in the machine when the guide caught his right little finger, resulting in hospitalization and surgical amputation of the finger.",0
"An employee was standing on a belt loader. He fell between the loader and an aircraft, hitting the pavement and suffering a broken neck vertebra and a head laceration.",1
"On April 24, 2022, an employee was standing on the top step of an 8-foot A-frame ladder, installing the cover of a roll-up gate. The ladder tipped over and he fell to the concrete ground, suffering a torn knee ligament. He was hospitalized and underwent surgery.",1
"An employee was installing a plastic strip on a processing line. While he was putting in a lag bolt, it punctured his left hand on the palm side.",1
"At about 1:00 p.m. on April 25, 2022, an employee was using a gas-powered trowel to finish concrete in the basement of a residential structure. The injured employee developed a headache, having inhaled carbon monoxide from the trowel.",1
An employee was trying to move a wheeled concrete buggy around a scissor lift. The employee's right leg was pinned and broken between the buggy and the lift.,1
"An employee was working at a laundry conveyor system, moving linen from the conveyor system to a cart. She was trying to free a stuck piece of plastic from the system when her right hand was caught in a pinch point. She suffered a laceration and avulsion.",1
An employee stepped off a furnace platform through an 18-inch by 16-inch porthole opening. His right foot was severely burned by molten metal.,1
"An employee was operating a riding blower machine on a road median when they were struck by a vehicle and ejected from the machine, resulting in ankle and shoulder injuries.",1
An employee was working on a conveyor belt in a truss plant. The employee was removing a plate from a truss when a piece broke off and struck the employee's neck.,1
"Two employees were in an elevated aerial lift and had just finished installing a sign onto a warehouse building. As the lift swung away from the building, it contacted overhead power lines that were 45 feet away from the base of the lift. One employee experienced electrical shock and burns to 27% of his body (arms, hands and back) and was hospitalized. The second employee was treated and released.",1
"An employee was getting deli meat from a refrigerator cooler. The employee bumped into another employee while leaving the cooler and fell to the ground, suffering a broken hip.",1
"A carbon steel plug for a water separator was released during a pressure test. The pressure inside the separator forced an impact tool into an employee's upper torso, causing four broken ribs, a liver laceration, and a bruised lung.",1
An employee was using a chop saw when it kicked the pipe he was cutting and broke his right middle finger.,1
"On April 21, 2022, an employee had completed filling the feed bin when he climbed into the cab of his tractor and fell backward, striking the back of his head on a concrete pad. The employee suffered a concussion and a laceration on the left side of his scalp.",1
A driver was making a delivery and was found on the ground behind the store with a fractured skull and a broken knee.,1
"An employee was helping troubleshoot a relief valve that controlled a safety rail. The employee was descending a ladder on a feed truck when the relief valve was released. The pneumatic rail amputated the employee's right thumb, which caused the employee to fall 4.5 feet to the concrete floor and suffer broken vertebrae and head lacerations.",1
"An employee was working on a ball valve for a hot water line. The employee unscrewed a pipe and was sprayed with hot water, resulting in burns to his arms, shoulders, and torso.",1
An employee was moving an electric pallet jack in a charging area. He lost control and struck his foot on a pole. He was hospitalized with a broken ankle.,1
"On April 25, 2022, at approximately 9:00 a.m., an employee was looking into an issue at the bun mixer when both hands got caught under the knife that cuts the dough. The employee's right hand fingers were severely cut. The employee's left hand also sustained lacerations.",1
"An employee was carrying a sport utility vehicle hatch to place it into a parts basket. The hatch struck a handwork table and slipped out of employee's hands, striking the bill of the employee's PPE hat and then the employee's nose. Part of the nose was amputated.",0
"An employee was walking from a break area to a work station. The employee tripped over a rod and fell to the floor, suffering an arm injury. The employee was hospitalized.",1
"An employee was picking boxes off the back pallet in a racking system. The employee tripped over the front pallet (which was on the floor in front of the rack) and fell on her hip. The hip was broken and she was hospitalized, requiring surgery.",1
An employee was working on a ladder to put battens on exterior siding when they fell to the ground below and suffered a skull fracture.,1
"On April 25, 2022, an employee was backing up a stand-up forklift when it struck a concrete wall. The employee's foot was broken; the employee underwent surgery and a medical amputation to the foot.",1
"On 4/25/2022, an employee was working on a cutting line removing bars of soap to place on a conveyor belt. As the employee removed soap scrap (debris), the blade of the cutting machine amputated her right index finger near the knuckle.",1
An employee was trying to move a wooden box on a pallet. The box gave way and the employee fell backward. He suffered a broken hip that required surgery.,1
"An employee was unloading a pallet inside a truck. A double-stacked pallet fell on the employee, who suffered a broken leg.",1
An employee suffered an abdominal injury while helping carry guardrails weighing 250 to 300 pounds up stairs. The employee was hospitalized.,1
"On April 25, 2022, an employee was standing on a conveyor system when their foot was caught in the conveyor resulting in amputation of four toes.",0
"An employee was removing a bolt from a separator shaft on a slitter. The overarm came up and the bolt from the separator shaft struck the employee's left index finger, resulting in a fingertip amputation.",0
"After serving on fire watch for a plasma cutting operation inside a tank, an employee developed difficulty breathing and was hospitalized for smoke inhalation.",1
"An employee was on a gang wall form installing tapper ties. The employee fell about 10 feet onto his left side resulting in a broken leg and a broken arm that required surgery.  The employee was wearing fall protection, but it was not attached to the wall form at the time.",1
"At about 11:50 a.m. on April 25, 2022, an employee was grinding metal cylinder parts using a rotating brush wheel on a pedestal. The employee's gloved hand was caught in the brush wheel, which amputated the employee's right middle finger.",0
"An employee was transporting building material on a forklift. The weight shifted while the forklift's forks were being extended, causing the forklift to flip forward. The employee suffered a dislocated left shoulder and a head laceration.",1
"An employee was removing a piece of quartz trim and transporting it to a dumpster. The piece cracked and lacerated the employee's right hand deeply enough to reach the bone and damage a tendon between the thumb and fourth finger. He was hospitalized, requiring surgery.",1
An employee suffered a lower back injury while stocking shelves in a grocery department.,1
An employee was chipping a concrete pad when a piece of the concrete came up between his half-face respirator and safety glasses and injured his right eye.,1
"An employee stepped off a deck, slipped, and fell onto a lawn, suffering a broken ankle.",1
"While doing surveying work, an employee jumped over a barricade, fell to the ground, and suffered a broken leg.",1
An employee was working on a conveyor belt when his right thumb was caught in the machine and lacerated.,1
An employee was mowing grass. The employee slipped on an incline and their foot was caught by the mower blade resulting in amputation of two toes.,1
"An employee was driving a tractor with a dump wagon. The tractor went out of control and he jumped off; the tractor then hit a stone wall, tipped to the side, and struck his upper body. He suffered a bruised liver.",1
"A deer feeder fell onto an employee's left leg, injuring it.",1
"An employee was about to use a pipe threading machine to cut and thread 1.5-inch pipe and thread on fittings. The fitting he was installing was a 1.5-inch tee onto the pipe he had just cut and threaded; he was using the machine's motor to turn the pipe as he held the fitting/tee using a 14-inch pipe wrench. After the tee had been started, the machine turned on and the pipe began to rotate. The pipe wrench contacted the machine's threading assembly, which stopped the rotation; the employee's left index fingertip was caught, crushed, and amputated between the wrench and the carriage assembly.",0
"An employee was cutting a piece of aluminum using a torch. Unexploded ammunition inside the piece exploded, creating shrapnel that struck the employee. The employee suffered a chest contusion and a laceration up the left arm.",1
"An employee was operating a press machine. The press came down to bend a part the employee was holding, and the part crushed and fractured his right middle and ring fingers.",1
"An employee was using a hammer and wrench to loosen a nut on a valve. The employee's right little finger was caught between the wrench and the valve body, causing the amputation of the fingertip above the first knuckle.",0
An employee tripped on the edge of a pallet in the production room and fell to the floor resulting in in-patient hospitalization for facial fractures.,1
An employee fell from the fourth rung of a ladder and suffered three broken ribs.,1
An employee was handling a captive bolt gun when it shot him in the left side of the stomach. He was hospitalized.,1
"An employee was performing carbon arc welding when hot multi-metal weld fell downward and onto the employee's skin between the neck and chest, under the collar of the employee's fire-rated overalls. The employee suffered second and third degree burns.",1
"An employee was moving a sausage linker when it started to tip over. The employee ran into another piece of equipment and was then hit by the linker. The employee suffered a hematoma and a blunt impact to the left leg and a cut on the little finger, and was hospitalized.",1
An employee was pulling a cord to close an elevator door when a piece of metal framework (for a window in the door) fell and struck and injured his head.,1
"An employee had just set two jersey barriers in place and was working to secure them. A 30-pound locking pin was dropped into place and broke the employee's arm. The employee was hospitalized, requiring surgery.",1
"An employee was unloading empty pallets out of his trailer using a pallet jack. A contracted employee was on a nearby dock, stacking pallets using a forklift. The injured employee was standing with his back facing the dock when the contracted employee backed up their forklift and contacted the employee's foot, resulting in foot injuries.",1
"At 5:32 a.m. on April 26, 2022, an employee was moving the uprights for a shelving system on a two-level wheeled cart. The employee's fingers were caught between the cart and a bollard, and the employee's right middle fingertip was amputated.",1
"An employee was preparing breakfast. She slipped and fell while holding a pan of hot grits, which burned her right arm and right thigh.",1
"An employee was sweeping rocks off a roof. The employee stumbled and fell through a skylight, landing on the floor and suffering facial and head injuries.",1
"An employee was loading his dolly onto the back of his delivery truck using a ramp when he fell off the ramp to the ground below, resulting in a fractured rib and punctured lung.",1
"An employee developed an abdominal hernia while lifting a 10-pound butter box. The employee was hospitalized, undergoing surgery.",1
Employees were torching an area of the building from the ground to prepare for demolition. A brick fell from above and struck an employee in the left shoulder and leg resulting in a left femur fracture.,1
"The injured employee was training a new employee on using a nailer machine. As the trainer was pointing out where the trim was not lining up, the machine started and amputated the tip of the trainer's finger.",0
"An employee was working on catalytic converters. During the process of opening the catalytic converter, a shear bar pinched his fingers, amputating his right middle and ring fingertips and crushing his right index fingertip.",0
"An employee drove a skid steer carrying a dump hopper containing demolition debris to a 7-foot-high dumpster. He lifted the dump hopper up so the forks were just above the edge of the dumpster and moved forward so the dumpster edge would support the bottom of the dump hopper. He then left the skid steer and put his hand under the fork to use as leverage so he could push the lever to dump the hopper. When he pushed the lever, the hopper tilted forward, causing the pan by the forks to lift up; then, as the hopper came back, the pan came down on his left middle and ring fingers. He suffered amputations to both fingertips.",0
An employee was walking church grounds near a construction site. There was an explosion in the construction area from the gas line and the employee suffered second- and third-degree burns.,1
"An employee fell while pushing a laundry cart, landing on the floor and suffering a broken kneecap and ankle.",1
"An employee's foot got caught on a tile in a hallway, causing her to fall on her right knee. The knee was broken and she was hospitalized, requiring surgery.",1
"An employee was putting a roll into a roll stand. His hand was caught in the roller, and his thumb and middle finger were pinched between the lifting arm and the roll shaft. He suffered avulsions and lacerations to the thumb and the finger,",1
"An employee was cutting foam pieces using a 10-inch table saw when the saw blade contacted his left hand, resulting in a partial amputation to four fingers. The machine was not guarded at the time of the incident.",1
"An employee was cleaning and servicing a slip and drive machine. While he was checking whether it was working, its gears pulled in a rag and then his right index finger. The finger was amputated at the knuckle.",1
An employee was cleaning out the screen on a plug catcher. The employee's left middle finger was caught between the screen and the deck of the plug catcher. The fingertip was amputated at the tuft of the last phalanx.,0
"An employee was unwrapping a pallet. He tripped on the plastic wrap and fell, suffering a broken left hip. He was hospitalized.",1
"An employee was climbing a ladder to stabilize a long metal roof panel. The ground had been frozen when the ladder was placed; when the sun came out, it thawed and became muddy. The ladder slipped out and the employee fell, suffering twelve broken ribs on the left side.",1
"An employee was on a stand checking for leaks on a vessel door. A plug on the door came out. High-pressure gas was released, hitting the employee's midsection and pushing him back against the handrail of the stand. He suffered bruising to the midsection and a partially ruptured spleen.",1
"An employee was lifting a 20-foot long, metal pole for the meter run in the dog house. The pole touched a live electric line over the doghouse and the employee was shocked. The employee then dropped the pole and fell to the ground. The employee sustained electrical burns on both arms and the front of the torso.",1
"On April 26, 2022, an employee was on a three-step ladder aligning a hose on an off-highway truck. Upon completing the task, the employee attempted to step down from the second step of the ladder when he fell to the concrete floor, resulting in a head contusion and hospitalization.",1
Two powered industrial trucks collided. The driver of one of them suffered a broken leg.,1
"Regulators were being fitted on an oxygen tank. The tank exploded, causing a flash fire. An employee suffered burns on the left side of the torso, the right hand, and the left side of the face.",1
An employee was removing a piece of scrap meat from a conveyor system and suffered a broken bone in her right hand.,1
"At about 2:00 p.m. on April 27, 2022, an employee was dehydrated and lost consciousness after exiting a refining cooldown room, fell, and suffered a laceration where his chin struck a metal pipe.",1
"Two employees were working in an area. The first was using a pneumatic press to consolidate explosive powder into a pressed pellet. The second was using a manual arbor press to extract the pressed pellet from the pressing die. There was an explosion of zirconium potassium perchlorate, and the second employee suffered burns to the face and neck.",1
"An employee slipped off a curb in a parking lot, rolled his ankle, and fell to the ground. He suffered a broken left ankle.",1
"An employee fell down a flight of stairs, suffering an injury that caused neck and back pain.",1
An employee was helping a client get their dog out of a vehicle. The dog bit her left hand; she developed cellulitis and was hospitalized.,1
An employee was changing film when a heat seal bar pinched the employee's right index finger. The employee suffered an amputation to the finger.,0
"An employee was hooking a dolly to a trailer. The pintle hook receiver crushed and lacerated his right little finger, amputating the fingertip.",0
"An employee was removing a drive belt from a feather auger. The employee tried to pop the belt loose from the pulley, and the pulley rotated. The employee's right hand was caught between the belt and the pulley, resulting in a partial amputation to the ring finger.",0
"Two employees were trying to adjust a 1,500-pound accumulator. It tipped over and caught one of the employees, breaking his right leg.",1
"A forklift ran over three toes on an employee's right foot, breaking them.",1
"At 6:20 p.m. on April 27, 2022, an employee was backing up a forklift with the dump box elevated. The forklift rolled over and came to rest on its side. The employee suffered an open fracture of the right big toe.",1
"An employee was troubleshooting a belt and pulley system on a furnace. As the employee checked the tension on the belt, their fingers were pulled into the pulley, resulting in amputation of three fingertips. The belt and pulley system was not locked out at the time.",0
"An employee was helping change out an auger and drill rod joining. The employee was cleaning excess dirt out of a bolt hole when the drill rig moved forward, the drill rod and the auger lined up and joined together, and the employee's right middle finger was pinched between the two. His fingertip was amputated at the first joint. He was hospitalized.",1
"An employee fell backward while packing a box, landing on the floor and suffering a possible back injury.",1
"An employee was on a ladder sanding a drywall bulkhead. He fell, suffering a cut to the head and a hand injury.",1
An employee was operating a saw machine. The sawblade amputated the employee's right index finger between the third and fourth knuckles and lacerated the employee's right middle finger in the same place.,1
"An employee was inspecting a vehicle to find the origin of a sound in the engine. He had his hand near the serpentine belt when the vehicle's engine was started. The belt lacerated his left middle finger, causing an amputation to the fingertip.",0
"An employee was spotting for heavy equipment during a brush clearing operation. While a debris pile was being moved, bees (from a beehive in the pile) stung the employee's head and arms.",1
"An employee was unloading vehicles from a car hauler. His foot was caught in a strap and he fell off the hauler to the ground, suffering head, facial, and neck injuries.",1
"An employee was standing on a carriage platform about 2 feet high, clearing out something from a roller. He fell, possibly hitting his chest on a guardrail, and suffered a partially collapsed lung.",1
"On April 27, 2022, an employee was operating a band sealer when its outfeed jammed. She was clearing it when the jammed piece pulled her into the machine; this triggered the machine to actuate, and a knife in it partially amputated her index and ring fingertips without bone loss.",0
"A concrete panel was standing upright on the ground, rigged for lifting and secured from falling over. An employee was on a ladder, unhooking crane rigging, when the crane boom was lowered. The panel leaned toward him and he jumped off the ladder, thinking it was about to fall over. He landed on both feet and suffered fractures to both heels. He was hospitalized.",1
An employee was filling the gas tank on a zero-turn mower when it ignited. The employee suffered burns to the right side of the body.,1
An employee was preparing to refuel a bulldozer. The employee was between the bulldozer and the refueling tank on a trailer when the bulldozer began to back up. The employee suffered a broken right leg.,1
"An employee was removing a piece of drywall from the top of a wall. The drywall fell, causing him to fall in turn and land on his back. He suffered a back strain.",1
"An Atlantic Concrete Cutting employee was using a quad drill to cut a concrete slab. His left hand slipped off the handle and contacted the top of the drill bit, which amputated part of his left index fingertip.",1
"An employee was throwing ductwork over the railing on the third floor of a building under construction. The railing failed and the employee fell, suffering back fractures and a contusion.",1
An employee set his ladder up at the front of a house to prepare to do roofing work. He loaded his tools and gear and began climbing up the ladder. The ladder fell out from under him and he fell to the concrete below sustaining a broken ankle.,1
"An employee walked out of a side entrance, tripped on a mat outside the door, and fell onto concrete, landing on his left arm and breaking his elbow.",1
"An employee suffered a lower back injury while moving, twisting, and lifting bins and items.",1
The injured employee was moving mud boxes within a tunnel operation using a locomotive. An overhead crane was used to bring the loaded boxes out of the shaft. A loaded mud box was still attached to a locomotive when it was hoisted by the overhead crane and raised about 3 to 4 feet. The hitch broke causing the locomotive to drop to the bottom of the shaft and the operator's chest struck the control panels. The locomotive operator suffered a broken rib and internal bruising and was hospitalized.,1
"An employee was operating a calender machine. The material that was being run through the calender became misaligned and the employee tried to correct it. The employee's gloved left hand was pulled into the machine and crushed between two rollers, causing fractures.",1
An employee was packing items from a residential home to move to another location. The employee fell off the ramp on the back of the truck onto the ground and fractured their leg. The employee was hospitalized for surgery.,1
"At 1:19 p.m. on April 28, 2021, an employee was applying tape to a roll on a winder when the tape caught the employee's jacket sleeve. The employee was dragged a quarter-turn around the roll and suffered two broken left-side ribs, a broken right tibia, and a punctured lung.",1
"At 3:00 p.m. on April 28, 2022, an employee was running a jointer when it amputated his right middle finger.",0
"An employee was changing the deck height of a lawn mower. His right little finger went under the deck before the blade stopped, and the fingertip was partially amputated.",0
"An employee was filling up a tire with air. The tire wall exploded, and the employee's hand was broken.",1
"An employee was helping a van back up in an alley. The employee's right arm was caught between the van and an electrical pole, and the employee suffered an open fracture to the arm.",1
"An employee was on a ladder to clean the gutters of a warehouse when they fell off the ladder to the cement ground below, resulting in a broken right hip.",1
An employee was trying to lower a dock door leveler when it fell onto the lower half of his body. He suffered lower leg and foot fractures.,1
An AutoZone employee was talking to a customer in a parking lot when a vehicle struck him. He suffered injuries to the right knee and lower back.,1
"An employee was changing his boots to enter a building and placed his right hand inside a door frame to stabilize himself. The wind caught the door and slammed it on his hand, resulting in amputation of the tip of his ring finger.",0
An employee was moving concrete panels when his left index finger was pinched between a panel and a piece of wood. The finger was partially amputated.,0
"While pulling wire, an employee got caught up in the wire and fell to the floor, sustaining a broken right ankle.",1
"An employee was walking across truss joists to repair a cardboard vent. The employee's foot slipped. The employee fell, landing on their side against a truss joist and suffering broken right-side ribs and a laceration to the right lung.",1
"An employee tripped over some 4-inch charged fire hoses lying on the deck of a ship. The employee fell to the deck, suffering a broken left elbow and another arm injury that required surgery.",1
"An employee followed co-workers into the plenum to do super sucking operations. The employee stepped into hot fly ash, resulting in second degree burns to their lower right ankle and calf. Personal protective equipment was not worn at the time of the incident.",1
An employee tripped on a plastic banding strap in a hallway and fell to the floor. The employee suffered abdominal pain and was hospitalized.,1
"An employee was collecting shopping carts in a parking lot. A vehicle (involved in a high-speed chase with the police) struck the employee, who suffered fractures and contusions.",1
"An employee was using a wood splitter when its blade cut four fingers on the employee's left hand, causing amputations.",1
An employee was clearing debris from under a box turner. The air cylinder that activated the machine retracted and caught the tip of the employee's left index finger against the conveyor bed. The bone in the finger was fractured and the last 3/8 inch of the finger was amputated.,0
"An employee was picking up cardboard from the floor. He lost his balance and fell on his knee, then landed on his hip. His hip was broken.",1
"A temporary employee was driving a utility terrain vehicle on a dirt road when it rolled. The employee's left foot was caught under the vehicle, and the employee suffered an injury to the foot and ankle.",1
"At 11:00 a.m. on April 28, 2022, an employee was changing a tire on a trailer. He had jacked up the trailer, removed the tire, and repaired it. As he was trying to put the tire back on, the jack slipped. His left arm was trapped between the tire and the ground, and his forearm was broken.",1
"While stepping from one railcar to another, an employee fell between the cars. The employee's fall protection cable caught the employee, but was then cut by the railcar. The employee fell to the ground and suffered a broken right femur, bruising to the hips, and scrapes and cuts.",1
"An employee was offloading material from a panel saw. He was retrieving material when the saw amputated his right index, middle, ring, and little fingers above the middle knuckle.",1
"An employee was hooking a dolly to a trailer. The dolly caught his left little finger, necessitating an amputation to the fingertip.",0
"An employee was organizing his vehicle and offloading equipment, moving in and out of vehicle's rear door. An aerial lift with the bucket in the down/resting position was positioned near the rear door of the employee's vehicle. When another employee approached, the injured employee turned and struck his head on the bucket of the aerial lift resulting in a head contusion. The employee was hospitalized for a brain bleed.",1
An employee was lifting a patient. The patient fell on her and she suffered a broken tibia.,1
"On April 28, 2022, an employee suffered a laceration while operating a grinder.",1
"An employee was checking the air pressure on an edge bander. The edge bander's blade struck the employee's right hand, amputating the middle finger and lacerating the other three fingers.",0
"An employee fell backward and hit their head on the floor, resulting in a large cut in the back of their head.",1
An employee was reconditioning a circuit breaker. The mechanism caught the tip of his thumb and amputated it at the nail bed.,0
"At 1:30 a.m. on April 29, 2022, an employee was inside a machine when the conveyor at its bottom activated and pinned the employee's ankles. The employee suffered three open fractures to the left ankle and one to the right and was hospitalized.",1
"A skid steer backed into an employee, fracturing his skull.",1
An employee was closing a door in an aircraft. The door closed on his left thumb and partially amputated it.,0
An employee was hammering a grain bin to clean the insides of its walls. The employee was on an auger chute. The employee's foot slipped into an observation cover and the auger lacerated the employee's leg.,1
"Three iron workers were removing the choker and cables from a knuckle boom carrying hollow structural section steel tubing. One of the employees was turning around when the steel tipped over and fell on his left leg. His lower left leg was broken above the ankle and he was hospitalized, undergoing surgery.",1
An employee was clearing a jam on a capper machine when the machine pinched the employee's right middle finger and amputated it.,0
"An employee was performing a roll transfer on a turret winder. After indexing the turret, she was about to separate the bag at the perforation but noticed that the bag had not adhered to the new core. She tried to reach over the finished roll (which was on the rear spindle) to tuck the bag onto the new core (which was on the front spindle). Her hand was pulled into the front spindle, and her right forearm was broken. She was hospitalized.",1
"An employee was operating a skinner. Its blade caught the employee's left index finger, causing an amputation.",1
An employee was trying to raise a lift gate on a box truck. The gate amputated the tip of the employee's left middle finger below the fingernail line.,0
"An employee tripped while walking down an aisle and fell to the floor, bruising her right hip.",1
"While being put in place, a steel beam crushed an employee's thumb, causing an amputation.",0
"On April 29, 2022, an employee was obtaining a batch of hot undercoating chemical from a tank located in the tank farm retaining area. The employee was holding a quart-size can of hot liquid chemical while walking down a cross-over ladder and slipped and fell to the ground. The hot liquid chemical splashed onto the employee, causing burns to their face, neck, and arm.",1
"An employee was running wire cable through a die. As the employee checked the cable for imperfections, the wire pulled the employee's right hand into the spool, causing an amputation to the middle fingertip.",0
"A joist was being lifted by a crane. An employee's right hand was squeezed between the joist and the chain, and the middle fingertip was partially amputated.",0
An employee was using a hook to remove meat from a conveyor sprocket. The hook became entangled in the sprocket and amputated the employee's finger.,0
"An employee was trying to install a glass door. The door was in the open position and would not close. When it was forced shut the stainless steel lamination peeled off its bottom rail. The employee was trying to remove the lamination when it cut his fingers. He suffered a partial amputation to the right little finger (down to the first knuckle), as well as a laceration to the right ring finger.",0
"Employees were connecting rods to a boring machine. One of the rods was extremely crooked, so the employees shut the machine off and tried to correct the rod so that it would run correctly. Two employees were holding the rod while a third held the tip of one rod to insert it into the hole they intended to bore. The machine was turned on. The guide wire that ran along the rod entangled the third employee's sleeve and glove; it then jerked his arm and forced his entire body into a rotation. He suffered an amputation to the right thumb, as well as a fracture and a laceration to the right hand.",1
"An employee was working with a machine that cut product to length and ejected it through an ejection/discharge slot. The employee checked the ejector and noticed a jam. While he was trying to removed the jammed product, the machine's blade caught his finger and amputated the tip.",1
"An employee was rebuilding a three-phase, 12,470-volt electrical distribution line. While making a connection, he was shocked.",1
"A YRC Freight employee had just unstrapped a 2,700-pound crate inside a trailer, about halfway down its length. A forklift picked it up to remove it from the trailer. The crate fell over and struck the employee, who suffered a broken right leg, left leg, and right wrist.",1
An employee was cutting a concrete header with a concrete saw. The saw kicked back and lacerated his face.,1
"An employee was performing an electrical job on a panel when an arc flash occurred, resulting in burns that required hospitalization.",1
"On April 29, 2022, an employee was washing a concrete truck when he slipped and fell, resulting in broken ribs and a damaged lung.",1
"On April 29, 2022, an employee was operating a clamp forklift in reverse (pulling product). While making a turn, his left foot struck a support beam resulting in an amputation to his big toe and fractures to other toes.",0
"An employee was struck by metal casing, resulting in an injury.",1
"An employee was standing on the step to the seafood case, became dizzy, and fell off the step. The employee sustained a broken rib and broken facial bones.",1
"An employee and a customer were removing an oil cooler. The employee climbed below to get straps and set up the crane. The oil cooler began to slide from the top of the machine, then fell onto the employee's right foot. The foot was broken.",1
"An employee was checking an urn full of hot tea. The urn spilled hot water and tea leaves onto her, which burned her upper body. She was hospitalized.",1
An employee was shaving rubber off a seal with a right angle grinder. The grinder's chainsaw-style blade cut his index finger at the second knuckle.,1
An employee was using a step stool to reach an item on a shelf. The employee grabbed the shelf with their left hand and the item with their right hand. The step stool slid out from under the employee and their wedding band got caught on the shelf. The employee's ring finger was degloved and had to be medically amputated.,0
An employee was moving a bulldozer from one portion of the site to another. The bulldozer traveled over a mound of dirt. The blade got caught in the dirt on the opposite side of the mound and the dozer came to a sudden stop. The driver was propelled out of his seat and his head struck the top of the cab. The employee suffered two fractured vertebra and weakness in his right hand and leg.,1
Employees were transporting a 40-foot truss on carts. They were readjusting the truss when it was set down on one employee's left middle finger. The fingertip was amputated from the nail up.,0
"An employee lifted a 3,000-pound fuel cell off a floor using an overhead hoist in order to put it in a fork truck. When the fuel cell was about 18-24 inches off the floor, the employee began to turn the fuel cell to get it to line up in the truck. One of the eye bolts failed, causing the fuel cell to drop and land on the employee's right foot. The employee's first, second, fourth, and fifth toes were broken.",1
"An employee was clearing a jam in a machine when the tip of their little finger was caught on a wheel, resulting in a fingertip amputation.",1
"On April 30, 2022, a nurse had an asthma attack after entering a restroom smelling strongly of cleaning product.",1
"On April 30, 2022, an employee was removing a finished roll of film from the shaft of a winder. As the employee manually pulled the 80-pound roll, his right ring finger was pinched between the cardboard core of the roll and an indention from a missing shaft plug on the steel shaft. The employee sustained an amputation to the right ring finger that included the fingernail.",0
"An employee was walking across a ramp after discharging a vessel when they fell approximately 5 feet to the ground below, resulting in fractured ribs.",1
An employee was on the platform of a nurse wagon in the field when they lost balance and fell 28 inches to the ground. The employee was hospitalized with a fractured right tibia and fibula.,1
"An employee had just finished loading meat onto a conveyor belt. While walking in her work area, she slipped and fell on a mixture of oil and water. The employee broke her upper left femur requiring hospitalization and surgery.",1
"An Amcor employee was working on the extrusion wheel, attempting to fix an issue with the bottle weights and the pressure from the parison air. The employee completed the inspection/repair and began the start-up sequence. The parison did not feed properly. The employee went to correct the misload. The plastic then fell off to the side and the employee attempted to grab it but his right hand got caught in the side of the mold as it was closing. The employee's fingertip was amputated.",0
"An employee had just repaired an air line on a fryer. He was below the fryer, verifying the repair, when the machine cycled and pinched his left middle and ring fingers. He suffered amputations to both finger pads.",0
"An employee was using an electric pallet jack to pull a pallet. The employee was operating the pallet jack with his right hand and started to turn his body so he could use the pallet jack to push the pallet into position. The pallet jack did not stop and continued to travel toward the employee, causing his right foot to become pinned under the pallet jack. The employee attempted to push the pallet jack off his foot when he fell on the floor. The employee suffered nerve damage, torn tendons, and arterial damage in his right foot and ankle, requiring hospitalization and surgery.",1
An employee sustained burns to the torso while lighting a pizza oven.,1
"On May 1, 2022, at 9:15 p.m., an employee was in an ATV accident, resulting in rib fractures and a possible clavicle fracture.",1
"Two employees were replacing a motor for a drive system. The bolts for the motor sheared off and the motor fell onto one employee's abdomen, breaking the employee's pelvis. The employee was hospitalized and underwent surgery.",1
An electrician was opening a cover on a 60-amp bus plug and came into contact with a live conductor resulting in an arc flash. The employee sustained a fractured nose and burns.,1
"An employee was clearing a stuck roller that was driven by a belt and pulley. The employee attempted to clear a stuck roller when his left index finger was caught between the belt and the pulley, resulting in a fingertip amputation.",0
"An employee was using an 8-foot ladder to install a power pack in the security room. The employee leaned to reach something when they fell from the ladder to the concrete floor below, resulting in a fractured rib.",1
An employee was working in the produce cooler area picking product from shelves when she tripped on a plastic pallet strap and fell. The employee sustained a fractured left femur.,1
"On May 2, 2022, an operator was in a robotic area repositioning a part that was not placed correctly. The employee was caught between a pneumatic pusher and a parts table, suffering lacerations to three fingers and their tendons.",1
An employee was placing chemical hoses at the top of the tub of a blender. His right ring finger was pinched inside an inlet valve actuator and was amputated to the first joint.,1
"An employee fell on a sidewalk and suffered head trauma, a fractured skull and a brain bleed.",1
An employee had been loading frozen blocks of salmon chum into a meat grinder. A block jammed in the top infeed of the grinder. The employee turned off the machine and went to unjam the grinder. The auger was still rotating and amputated the employee's left little and ring fingers.,1
An employee was operating a double electric pallet jack. His right foot was pinned and lacerated between the pallet jack and a metal bollard.,1
An employee had been operating a pneumatic cutting machine. She was trying to unjam the machine when the cutting blade amputated her right index fingertip.,1
Three employees were feeding extruded polystyrene foam sheets through the rollers of an extruder machine. One employee's arm was caught between the rollers and degloved.,1
"The injured employee was talking to a customer when a bottle containing coil cleaner, being used by a technician, ruptured and sprayed coil cleaner into the injured employee's eyes resulting in a chemical burn.",1
An employee was checking the tension on the belt pulley of a drag motor. The pulley caught the employee's hand resulting in partial amputation of the right index finger.,0
An employee was cutting a hazard tree. The tree broke loose and hit the employee resulting in four broken ribs and a bruised left lung.,1
An employee was loading outrigger pads onto a truck when his finger got caught between two pads resulting in amputation.,0
An employee was assisting with moving a length of pipe. The employee tripped and was run over by an excavator resulting in fractures to the lower body.,1
The employee was cleaning a portion of the machine when the rag the employee was using became caught in the machine. The employee attempted to pull the rag out of the machine and his left hand was pulled into the machine between the plastic web material on the rollers and the chiller used on the machine. The employee was hospitalized for an injury that required stitches.,1
"On May 2, 2022, an employee was performing maintenance on a de-energized press, which entailed replacing a junction box cover. The employee lost their balance as they were coming down from the work area and began to fall backward. The employee reached out and grabbed the belt that connects the flywheel to the motor. The belt then rotated downward and pinched the employee's left middle finger between the motor pulley and the belt. The fingertip was amputated.",0
An employee was adjusting the lower radiator hose of a truck engine when the hose came loose. The employee was sprayed with hot radiator fluid on the top right side of his head and right shoulder resulting in burns.,1
An employee was using a bandsaw to cut an aluminum bar. The bar was not feeding correctly. The employee was removing built-up aluminum chips when the saw blade cut down and partially amputated the employee's left index finger.,0
"An employee was removing a door sheet for a pitch containment tank. The employee was struck by the steel door and sustained multiple contusions, bruises, and soft tissue injuries requiring hospitalization.",1
An employee was walking across a parking lot when they were struck by a golf cart. The employee suffered a fractured right arm and left leg.,1
"On May 2, 2022, an employee was aligning a fixture on the rotating work table of a vertical turret lathe when his wrench slipped and his hand contacted a steel cable. The employee sustained a partial amputation to a finger.",0
"An employee was bending sheet metal in a brake press. The metal bent, and the employee's right thumb was pinched between it and the brake. The thumb tip was amputated.",0
"While operating a manual end-milling machine, an employee's right hand was caught in the point of operation causing his right middle, ring, and little fingers to be amputated. Also, a tendon was severed in their right forearm. The machine was guarded at the time of the incident.",0
An employee was screwing screws in the cover of a 440-volt electrical panel. An arc flash caused burns to the right side of the employee's body.,1
"On May 5, 2022, a conveyor caught an employee's leg as he stepped over it during maintenance. His leg was broken.",1
An employee was trying to straighten boxes on a pallet that was stacked on another pallet. He fell to a lower level and suffered a back injury and a left hip injury. The employee was hospitalized.,1
"An employee was dismantling pallets with a bandsaw. As the employee reached for a pallet, the saw caught the employee's right hand and amputated the index finger.",1
An employee was retrieving material from a warehouse racking system. The employee's head struck a metal cross-beam on a storage rack.,1
"A crane hook caught on a cradle, broke free, fell, and broke the crane operator's jaw.",1
"An employee was stacking a banded tote onto a pallet. A stack of totes fell off the next pallet, injuring the employee's head.",1
"An employee was prepping a roll of paper to be ejected from the editor machine. Paper rolled forward and the employee's right index fingertip was crushed between the roll and the ejection table, resulting in an amputation.",1
"An employee was taking boxes off the freezer shelf. She took a couple of steps back, tripped, and fell on the floor. The employee sustained a broken hip.",1
"On May 3, 2022, an employee was in front of a sit-down forklift, guiding it as it moved a pallet of mulch. The forklift struck the employee and knocked her to the ground. She suffered fractures to both arms and was hospitalized.",1
"An employee was in the bucket of a bucket truck, working to install messenger wire. The bucket put pressure on an existing communications cable, which snapped and amputated the tip of the employee's left thumb.",0
"An employee fell from a water truck's working platform to the ground 43 inches below, striking their head on the concrete floor. The employee suffered broken ribs and a brain bleed.",1
"An employee was standing behind a forklift, talking to the forklift driver. The forklift reversed and rolled over the employee's leg and foot.",1
"On May 3, 2022, an employee was changing tooling on the lathe. The rapid travel lever was activated and pinched the little finger on his left hand resulting in an amputation.",0
"An employee stood up from a rolling office chair, fell to the floor, and suffered a broken kneecap.",1
An employee was raising a trailer's lift gate. The employee's left index and middle fingers were pinched between the gate and the trailer; both were amputated.,1
"An employee was making repairs to an electrical panel. An energized wire in an adjacent panel shocked him, causing burns. He was hospitalized.",1
An employee was moving materials with a standing lift truck when they lost control of the lift. Their foot was caught against a material rack and broken.,1
"An employee was standing in front of a vehicle to prevent it from leaving an area. The vehicle ran over the employee, breaking the employee's right leg.",1
"An employee was working on a tube mill. This machine rolls a metal sheet/strip, welds it, and ejects it as a tube. While inspecting a finished tube for defects, the employee's glove got caught between the tube and the roller resulting in amputation of his right little fingertip.",0
"While walking from a dining area to a kitchen, an employee slipped in water and fell, suffering a concussion.",1
A 700-pound box fell from a third tier storage rack and landed on a temporary employee. The employee sustained fractures to the left leg and right ankle.,1
"Between 7:00 a.m. and 7:30 a.m. on May 3, 2022, an employee was clearing lots and cutting tree stumps and tops with a chainsaw. A log split, causing the employee's lower left leg to be caught between logs. The employee suffered a fracture and was hospitalized.",1
"An employee staged a forklift in front of the dock door and exited the forklift to raise the overhead door. After raising the dock door, he began to board his forklift, and another forklift backed out of a neighboring dock door and pinned him against the left side of his forklift. His left tibia was fractured.",1
An employee was on the back of a yard tractor. The employee was struck by a 45-foot reefer trailer while the truck was attempting to attach to a king pin. The employee sustained a broken femur.,1
A mechanic was working with a loader operator to replace the sheared pin of a quick connect system on a front-end loader. The mechanic was manually aligning the cylinder end with the attachment connection shaft when the quick connect system was actuated. The mechanic's index and middle fingers were caught between the cylinder end and the attachment connection shaft. The middle finger was amputated above the distal interphalangeal joint.,0
"An employee was using a magnet to move a steel angle. The magnet failed and the object fell on his left foot, breaking all five toes and crushing the foot.",1
"While stocking shelves, an employee fell off a rack onto the floor and fractured her back.",1
An employee was manually picking up the lid of an etching machine. The lid slipped and pinched the employee's middle fingertip resulting in amputation of flesh from the fingertip.,0
"An employee was unchaining a load of steel beams from his truck when the load shifted onto his left index finger, resulting in a cut on the tip of his finger.",1
"A manual, chain-operated dock leveler was pinched between a trailer and a dock, partially raised. Two employees were trying to lift it. When the leveler cleared the trailer, its pivoting, hinged lip sprung open and pinched one employee's right thumb against the fixed edge of the leveler. He suffered an amputation to the thumb.",1
An employee was putting two pieces of wood together using a nail gun when the nail gun discharged a nail into his stomach.,1
An employee was walking inside a tractor trailer and fell from the rear of the trailer onto the landing below. The employee was hospitalized with a fractured right arm.,1
An employee was steering fabricated pipe to a position near a doorway in preparation for pickup and delivery to a job site. His hand was caught between the pipe flange and a steel vertical support beam. Their third and fourth fingers were crushed and two fingernails were removed.,1
An employee was looking for stakes in the ground that marked areas for drilling. He tripped over a stake. When he fell to the ground his left arm hit a piece of rebar resulting in a forearm fracture. The employee was hospitalized.,1
"An employee was driving a forklift and loading pallets into a trailer. The employee leaned over to drop a receipt in the receipt box, and his foot hit the accelerator. The forklift then pinned his left leg against the wall in the loading dock area resulting in a laceration to his calf.",1
"An employee was making an adjustment on a trim saw machine when their right hand contacted the machine, resulting in a partial amputation of their right middle finger with a fracture. The machine was unguarded at the time of the incident after maintenance work was performed on the machine.",0
"An employee was pushing and feeding blocks on a conveyor line. While removing a broken block, the employee's right middle finger became caught on the slat conveyor and the fingertip was amputated. A guard was in place at the time.",1
"On May 3, 2022, an employee was installing insulation on the wall/ceiling of a newly built home. He fell from a 6-foot A-frame ladder set on a 4-foot baker scaffold, landing on the ground about 5.5 feet below and suffering facial fractures and a broken wrist. He was hospitalized.",1
"An employee was tightening a plastic banding strap around a wooden box crate when they were pulled against the box crate, resulting in abdominal injuries.",1
"An employee was struck on the head by an overhead monitor, suffering a contusion.",1
"An employee was changing bushings on a truck cab. The cab fell on his left arm, breaking the forearm.",1
"An employee was using a tire-mounting machine to seal a tire to a rim. As he added air to the tire, it popped, injuring the employee's thumb and wrist.",1
"An employee was cutting the bottom of metal duct work with a reciprocating saw while on the sixth rung of a 10-foot step ladder. The saw blade snapped and the employee started to fall. He grabbed the ladder, but his momentum carried him and the ladder over and onto the floor. He fell a distance of 68 inches onto the tile floor and sustained broken ribs, internal bleeding from the spleen and a laceration to the face. The employee was hospitalized.",1
"At 12:30 p.m. on May 3, 2022, an employee was adjusting a sheet press when it activated. The employee's left hand and arm were pulled into the splitter portion of the machine, and the employee suffered injuries to the forearm and thumb. The employee was hospitalized and the thumb was medically amputated.",1
"On May 3, 2022, an employee was operating an edger saw and suffered arm and hand lacerations and amputation of his left ring finger when his left hand was caught in the space between the chain and sprocket and the tensioner housing.",1
"An employee was preparing a tire rim clamp machine to accept a tire when the bead brake on the machine caught one of his left-hand fingers, resulting in an amputation.",0
"At 1:00 p.m. on May 4, 2022, an employee was checking a belt when it turned and amputated his left middle fingertip.",1
"An employee was removing a sheet of glass from a glass cutting machine's table and putting it onto a cart. The glass struck the cart and shattered, sending a shard of glass into the top portion of the employee's cut resistant sleeve on the left arm, causing a laceration to the forearm. The employee was hospitalized and required surgery for an artery.",1
"An employee was lying on a roll-around creeper, welding overhead on a sponson tank. A weld fell onto his abdomen. It set his fire-resistant welding shirt on fire, and air from his portable air conditioning unit caused the fire to accelerate. It spread quickly over his clothes and body, burning his chest, arms, abdomen, upper thighs, and back.",1
An employee was working on ground level installing connectors in combiner boxes. They tripped on the leg of a prefabricated table and fell to the ground resulting in a fractured pelvis requiring hospitalization.,1
An employee was guiding a skid steer when it ran over his leg. The leg was broken.,1
An employee was vacuuming inside horizontal ductwork at a factory. He slid down part of the ductwork where it had a downward slope and the ductwork scraped his leg and injured his wrist. The employee was hospitalized.,1
"An employee was pulling a cake rack across a dock plate into a trailer. The rack became unstable and fell onto the employee, who suffered a broken leg and a head laceration.",1
An employee was turning a reach truck into an aisle. His left foot was crushed between the reach truck and a pole it was about to strike. He suffered an amputation to the foot.,1
"An employee was loading glue stock into a labeler machine when the hinge door of the machine fell and pinched the tip of the employee's right ring finger, resulting in a partial amputation.",0
"An employee was retrieving a tool from a wheeled toolbox when the toolbox fell onto the employee, resulting in a lower back vertebra fracture and an injury to the lower leg and foot.",1
An employee was handling a steel trailer frame when it dropped onto their left index finger resulting in a partial fingertip amputation.,0
"An employee was walking through a doorway when they tripped over rubber lining and fell, resulting in a fractured left hand.",1
"An employee was walking backward pulling a work station cart. The employee tripped over a stool, fell backward, and struck their head. The employee suffered a brain bleed.",1
"An employee was installing roof panels. The employee fell from the roof to the asphalt ground, suffering two broken wrists and a broken toe.",1
An employee was operating a machine when it pulled in his hand. His index and middle fingertips were amputated.,1
An employee was using a portable ladder reach an electronic panel on the opener mechanism. The employee lost balance and raised his arm overhead to stabilizing himself and his middle finger got caught between the opener mechanism's roller chain and a gear. The employee sustained injury to their middle finger.,1
"An employee had been drilling holes using a digger derrick. While he was trying to remove the auger, his ankle rolled and he fell off the machine's base plate to the ground. His ankle was broken.",1
An employee developed a hernia while lifting a hand cart into a trailer. He was hospitalized.,1
"An employee was working from a 10-foot ladder to pull a low-voltage cable through existing cable rings above a drop ceiling. The employee fell to the ground below, resulting in a head injury.",1
An employee was traveling down a picking aisle on a forklift when their hand was caught by a pallet that was sticking out from a shelf. The employee sustained an amputation to a finger.,0
"A cashier walked away from the register to look at cases of water at the front of the store. The cashier then stepped back to turn around and walk back to the register, but tripped and fell on the floor, resulting in a fractured right hip.",1
"A bucket truck was backing up in the right traffic lane and struck a temporary employee working as a flagger, running over his leg. The employee's leg was cut open from the foot to the thigh. The employee was hospitalized.",1
"An employee was leaving his truck while pushing a cart. He fell to the floor, landing on his back and suffering a wrist injury.",1
"An employee was vacuuming the floor. When they turned to change direction, they got tangled in the vacuum's power cord. As the employee tried to shake it loose, they fell on the floor and sustained a fracture to the left hip/leg.",1
"An employee was standing on a gate panel looking at calves. As the employee stepped off the gate, a reversing pickup truck ran over their right leg/foot. The employee sustained broken bones in their  lower leg/ankle, and also injured their left wrist/arm after falling down.",1
"Two employees were working from a catwalk about 7 feet off the ground. The catwalk structure pulled out from the wall. It and one of the employees fell to the ground. The catwalk members pinned the employee's legs, injuring both (in particular, causing a dislocation to the left knee with blood vessel impairment).",1
An employee was struck by lightning while walking through the yard of a home under construction. The employee suffered severe internal and chest burns and was hospitalized.,1
"On May 4, 2022, at 10:30 AM, an employee was preparing food with a knife when the blade contacted their left middle finger, resulting in amputation of the fingertip.",0
An employee was on a ladder checking a water heater. He fell off the ladder and his hand got caught in the top hinge of a door as it was closing. A fingertip was amputated by the closing mechanism.,0
An employee was placing a marker for striping. A vehicle struck and injured the employee.,1
"An employee was at a service call, about to get out of their parked vehicle, when it was struck by another vehicle. Tools and shelving fell on the employee. The employee sustained a concussion and a fractured neck.",1
"An employee was fixing a leak in a produce cooler. He went onto the cooler roof to investigate the leak. He then stepped on a ceiling tile over the prep room and fell through to the floor approximately 10 feet below, resulting in a broken leg.",1
"Two employees were loading the trash compactor when it jammed. While trying to unjam it, an employee climbed the side wall of the compactor and fell to the warehouse floor resulting in a broken wrist, bruising, and loss of blood.",1
"An employee slipped on ice in a freezer and fell, suffering a laceration to the back of the head.",1
"An employee was limbing a tree trunk that had fallen onto power lines. When one limb was trimmed, another whipped upward and struck the employee, who suffered broken ribs. The employee was hospitalized.",1
An employee was helping purge a product line with nitrogen. A piece of solidified plastic came out of the product pipeline at the open flange end and impaled the employee's hand.,1
"While an employee was moving a pallet, she tripped over the fork of an electric pallet jack and fell backward onto the floor and a safety bollard. The employee sustained contusions to the head and neck, and a back injury.",1
"An employee stepped off a pallet jack, which then crushed the employee's right ankle.",1
"An employee was using a stationary alligator shear to cut scrap metal when his right index finger got caught between a piece of brass and the base of the shear, resulting in a partial amputation of the distal tip of the finger.",0
"A double column (about 16 feet long, weighing about 2,000 pounds) had been set on a workhorse with a crane. When an employee unhooked it, the crane caught the column and caused it to fall on him. He suffered torso and head injuries.",1
An employee was positioning metal to be bent in a hydraulic brake press. His left hand got caught in a pinch point resulting in fractures to the index and middle fingers and an amputation of the thumb tip.,1
"An employee was climbing down a step ladder. Halfway down, he slipped and fell to the ground, landing on his shoulder and suffering a broken scapula and ribs.",1
An employee was cleaning a running mixer when the mixer blade amputated his thumb directly above the knuckle.,0
An employee tripped over a cinder block while carrying boxes outside. The employee fell to the ground and suffered a broken wrist.,1
"On May 5, 2022, an employee was repairing an AC unit on a vessel. When he cut a Schrader valve, his left hand was exposed to nitrogen. The employee's hand was lacerated and became swollen.",1
"An employee was unjamming product on an overhead conveyor while standing on a rolling ladder. He fell down the stairs of the ladder while descending, landed on the concrete floor and sustained an injury to the head.",1
"An employee was on a 6-foot ladder that was standing on a piece of plywood, which had been placed on joists at the second-floor level of a building. The piece of plywood moved out from under the ladder. The employee fell off the ladder, through the second-floor joists and then through the first-floor joists, and onto the concrete basement floor 14 feet below. He suffered a head contusion.",1
An employee was setting trusses during a period of high winds. Trusses collapsed and stuck the employee's head and pinned his legs resulting in a concussion and bruising to the legs.,1
An employee was moving a roller to install it in a machine. The roller rotated and caught the employee against the machine. The employee suffered an injury that caused internal bleeding.,1
A forklift turned to drive under a racking system and pinned an employee against the rack. The employee suffered a broken rib and a punctured lung.,1
An employee had been setting up scaffolding. The employee fell from the scaffolding to the ground and broke his femur.,1
"An employee was removing a standpipe with his hands on a wrench and bolt. Once the bolts were loosened, the standpipe flange slipped and fell on the employee's right forearm, crushing it.",1
An employee was outside for an hour with clients supervising. When she came back inside she fainted. The employee was hospitalized with heat stroke.,1
The wheel of an electric pallet jack ran over an employee's hand and amputated his right little fingertip.,0
"On May 5, 2022, an employee was moving furniture for cleaning purposes when their leg and foot became caught between a bed and a chair resulting in a left hip injury.",1
An employee was spraying roof coating on the second story of a building when he lost balance and fell from the roof to the ground fracturing his femur.,1
An employee was bussing tables in the dining room when she tripped and fell. A glass broke in the fall and lacerated her hand.,1
An employee was shot in the right leg while trying to stop three shoplifters in a store. He was hospitalized.,1
"On May 5, 2022, at 7:45 AM, an employee was removing debris from a lathe when the chuck activated and partially amputated their right index finger.",0
"An employee was operating a coil-fed hydraulic punch press when a strip of material jammed in the die. The employee removed the guide rails and cleared the jam. The employee then re-secured the guide rails to the bottom die set by tightening the bolts. The employee then cycled the press, and a 2-inch guide rail shot out of the die and embedded in the employee's right side directly below the chest cavity causing a laceration, blunt force trauma, and a bruised liver. The employee required hospitalization and surgery.",1
"On May 5, 2022, at 8:45 AM, an employee and a trainee were moving a coil of wire with a hoist/crane. The hoisting mechanism contacted a bundle of cardboard boxes on the top shelf of a pallet rack. The bundle of boxes fell to the floor hitting the employee on the back of the head and causing a concussion and fractured C7 vertebra.",1
An employee was grinding meat with their hand near the grinder output when they sustained partial amputation of a fingertip.,0
"On May 5, 2022, an employee was operating a sheet metal shearing machine when a safety guard came down and amputated the employee's left middle fingertip.",0
An employee was testing an assembly flooring shear by raising and lowering the blade to ensure it aligned with the base. The employee's middle and ring fingertips were amputated.,0
"On May 5, 2022, an employee was exposed to cyclohexylamine while investigating excess steam from the boiler room and maintenance tunnel. The employee suffered vomiting, high blood pressure and vertigo due to the exposure to cyclohexylamine and was hospitalized.",1
An employee was working on a chain connected to a sprocket of a machine. The chain caught the employee's left index and middle fingers and crushed them.,1
"On May 5, 2022, an employee was driving a tractor-trailer to the next job site and had a seizure due to heat exhaustion.",1
"An employee was loading toolboxes into a truck bed. While he was trying to slide a box, his thumb entered a side hole and was lacerated at the first knuckle.",1
"The injured employee was walking in front of a vehicle. A service technician was removing a breathalyzer ignition interlock. Bare wires inadvertently crossed and started the vehicle. The vehicle was in gear when this happened, causing the vehicle to jump forward and pin the employee against the vehicle and some bulk oil storage tanks. The injured employee suffered crushing injuries to their pelvis and ribs.",1
"An employee tripped while getting up from a work table, fell, and suffered a broken left femur.",1
"An employee had just finished changing the blade on a bindery machine. He lifted the area where the blade is to inspect it, when he noticed glue on the Allen head. The employee went to scrape it off and the blade partially amputated his right middle finger, and cut his right index, ring, and little fingers. The machine was running at the time.",0
"An employee was headed home for the day. While traveling down the rear staircase, the employee fell and struck their head on the concrete base of the stairs and lost consciousness.",1
"An employee tripped on a step while entering his office. The employee fell on the same level and hit his head resulting in a bruise, and injured his hip. The employee was hospitalized.",1
An employee was driving a pallet truck when it struck a rack. The rack fell on his leg and fractured it.,1
"An employee went to exit a breakroom in a construction area but found that the door was locked. He climbed a wall on another side to exit the area. When he dropped down onto the concrete floor, he suffered a broken foot.",1
"On May 5, 2022, an employee was trimming aluminum window bars with a table router. While checking the vacuum collecting aluminum chips from the window bars, the router bit contacted the employee's left index finger, resulting in a partial amputation.",0
"An employee was working in a scissor lift when the load in the lift shifted, tipping the lift and flipping it over. The employee fell approximately 10 feet to the ground, resulting in broken ribs.",1
"While an assistant was holding a dog for an exam, the veterinarian bent down and the dog lunged and bit her nose. The veterinarian required hospitalization and surgery.",1
"An employee was on the sixth rung of a 8-foot A-frame ladder installing a tech screw into drywall using a battery operated screw gun. The screw wobbled and fell over causing the employee to lose his grip on the screw gun. While trying to catch the screw gun, he lost his balance and fell off the ladder. The employee sustained a skull fracture, a laceration to the back of the head that required staples, and a sprained left wrist. The employee was hospitalized.",1
"An employee fell off the back of a moving garbage truck while collecting trash, resulting in a broken leg.",1
An employee was working on an HVAC installation and suffered dehydration. He was hospitalized.,1
"An employee was working in the kitchen when hot water spilled on them, resulting in first and second degree burns on their arms and legs.",1
"On May 6, 2022, an employee was using a tire machine to inflate a tire when the tire came off the machine. The tire and its rim were propelled upward, striking the employee in the arm and resulting in a broken arm that required surgery.",1
"An employee was setting up a press by placing the die on the table. He leaned down to engage the compressed air with one hand while the other hand was resting on top of the die. When he activated the air, the die moved upward approximately 7 inches, and his left hand was caught between the die and the bottom of the stationary ram. The employee suffered three broken fingers, requiring hospitalization.",1
"An employee was cutting turkey heads with a kitchen knife while wearing gloves. The glove rubbed against the employee's right hand, resulting in a blister that required hospitalization.",1
"An employee was preparing a machine for setup and leaned forward to clean off an area. As he was backing out he misstepped over a hose, lost balance, and fell backward into the gravity slide table striking the left side of his back and head. The employee sustained a back contusion and a laceration (approximately 1 inch) to the head.",1
"An employee was changing a pinion gear in the gearhead that drives a vertical turning lathe. The gearhead fell and the employee stepped out of its path and fell off the round worktable onto the floor. The employee sustained a dislocated and fractured left shoulder, a fractured left forearm, and contusions on the left elbow.",1
"An employee was exiting the facility after her shift when she tripped on a floor mat and fell, hitting her left shoulder on the floor. The employee suffered a bruised shoulder and arm.",1
"An employee was performing maintenance on a forklift when they fell approximately 2 feet off the forklift and landed on a tote, resulting in multiple fractured ribs.",1
An employee was flipping a cylinder when their hand was caught between the cylinder and the floor resulting in a left index fingertip amputation.,0
An employee was loading a truck using a forklift. The truck started to pull away from the dock and the employee jumped from the cab. The forklift fell on the employee and pinned the employee between the forklift and dock plate. The employee was hospitalized with crushing injuries.,1
"An employee was mowing the grass on the third tee when his left foot made contact with the mower, amputating a toe.",1
"A crew was tripping out and laying down pipe. The injured employee was holding the mud box to capture fluids. The joint of pipe was started into the wrangler trough. The elevators were pulled rapidly sideways, releasing the pipe. The pipe came down and struck the injured employee on the hardhat, knocking him unconscious and causing a laceration to the head.",1
A Line Service Technician was in the process of towing an aircraft with a tug. The tug moved forward and pinned the employee into the nose of the aircraft.,1
An employee was putting a splash guard onto a deep fryer when she slipped and her right hand went into the hot oil in the fryer resulting in burns to the hand and fingers.,0
"An employee was attempting to cut a rooted tree in half. The tree was lodged into the railing of a bridge. The employee cut through half of the tree and then kicked the tree with his right foot to dislodge it from the railing of the bridge. The root part of the tree fell into the water, causing the top portion of the tree to plunge up and then back down, landing on the employee's left foot and pinning it between the bridge. The employee suffered a foot amputation.",1
"On May 6, 2022, at 11:00 AM an employee was securing material while standing in the bed of a pickup truck. The employee lost balance and fell to the left side landing on their left elbow and arm.",1
An employee was transferring joints of casing from one side of a pipe delivery system to the other when the casing rolled forward and pinned the employee's right leg against the side of the pipe delivery system. The employee sustained a fractured tibia and fibula.,1
"On May 6, 2022, at 11:25 a.m., an employee was driving a port tractor back to the port to receive an import container and collided with another port tractor operated by a co-worker. The employee suffered internal injuries and an amputation of his left leg above the knee.",0
"An employee was in an aerial lift trimming a tree at the rear of a house. The employee extended the boom, the lift pin snapped, and the boom and basket fell to the ground. The employee sustained a facial fracture and broken right arm and left leg.",1
An employee was using an overhead crane to move a 20-foot long steel tube from a delivery truck to a storage cart. The tube struck a building column and bounced back striking the employee in the chest. The employee sustained a broken sternum and bruised heart.,1
"An employee was working from an aerial lift approximately 20 feet above ground level. The pin on the boom snapped, causing it and the employee to fall to the ground. The employee sustained a fracture to the left leg, a broken right arm, and facial fractures and was hospitalized.",1
"An employee was on a pallet being lowered by a forklift when they fell to the asphalt below, resulting in a wrist injury.",1
"Two employees were responding to a single vehicle accident involving Entergy facilities. The vehicle's fender was entangled with a guy wire supporting a primary conductor. The two employees were working to release the tension and temporarily move the guy wire. When the tension was released, the guy wire contacted the primary conductor and an employee sustained electrical injury. The injured employee sustained a mild burn to the palmar aspect of the left hand and the left foot where voltage was discharged. The employee was also noted to be in atrial fibrillation.",1
"Two employees were operating a boom lift to install siding to the fourth floor of an apartment building that was being built. The operator of the lift tried to move the lift higher when the bottom of the lift basket got stuck on the fourth floor balcony railing, causing the lift to bounce/jump up. This caused both employees to strike the ceiling above them with their heads. One employee was treated and released. The other employee was hospitalized for a back strain.",1
An employee was on a work platform and accessed the top rail of a 48-inch handrail to manipulate an inlet shutoff valve approximately 8 feet above the work platform. The employee fell approximately 4 feet onto the floor of the platform and fractured his right hip.,1
 An employee was operating a powered industrial truck (PIT) with a load of storage rack decking. The operator was traveling down a storage rack aisleway when the load struck a rack upright causing the load to be pushed back and strike the operator resulting in a laceration to left knee and fracture injuries.,1
"An employee was standing on a ladder setting the spider arm. The tack weld on the left arm broke causing the spider arm to fall toward the employee. The employee fell backward off the ladder and the ladder and spider arm landed on the employee causing a broken hip, a dislocated femur and a fractured left elbow. The employee also sustained possible internal injury.",1
An employee was pushing carts in the parking lot when they were struck by a car and sustained a broken left ankle.,1
"The injured employee was tasked with holding a post for the pounder to hook the head so he can move to the next post. While changing the bottom foot brace to move to the next post, the cable from the pounder snapped causing an injury to the employee's right shoulder and an amputation to his right index finger.",0
An employee was performing a sanitation function on a can line machine and amputated the tip of her left middle finger in the conveyor pulley.,1
"At 4:28 p.m., on May 7, 2022, an employee suffered a partial finger amputation after his hand was pinched by a mold being lifted with a hoist.",0
Grease in a pan had caught fire while being heated on a stove. An employee picked up the pan from the stove to put out the fire and suffered second- and third-degree burns to the right hand.,1
An employee was performing their regular job duties when they were shot in the leg by an unknown assailant that entered the property.,1
An employee was unjamming paper in a machine. The machine amputated the employee's right index finger.,0
An employee was polishing a part on a manual lathe. The lathe injured the employee's hand and forearm.,1
"An employee was using a 6-foot ladder to retrieve plant material. He fell off the ladder while standing on the third rung from the top and landed on the ground. The employee sustained a broken collarbone, broken rib, and a bruised lung.",1
"A crew was removing an internal chevron in a confined space (vessel). The injured employee, a boilermaker, placed the internal chevon on a stringer light cord belonging to another contractor. The chevron damaged the light cord's insulation. The injured employee sustained electric shock and pain in his lower left leg resulting in hospitalization.",1
An employee was performing a CT scan. The IV bag of contrast dye leaked. The employee slipped on the contrast dye on the floor and fell resulting in a fractured and dislocated ankle.,1
An employee was going to put more flour in a hopper when their sleeve got caught on a shaft coupling. The employee's arm sustained lacerations requiring skin grafts and hospitalization.,1
An employee was removing old ceiling panels when he fell through the ceiling and hit his head on a piece of equipment that was under the area being worked on. The employee sustained a head injury.,1
"An employee was tasked with checking a centrifuge on the centrifuge stand on a drilling rig. While descending the stairs, the employee slipped and fell to the floor, sustaining a broken bone in their foot, a broken ankle, and back and chest pain.",1
An employee was moving the forks of a forklift when his right thumb was caught in the forklift and his thumb tip was crushed. The thumb tip required surgical amputation.,0
"An employee fell down a flight of stairs inside a dive support vessel. He suffered a head injury in the fall, losing consciousness.",1
"An employee tripped on a mat and fell on the floor, sustaining a broken arm.",1
An employee was delivering laundry at a vendor's loading dock. He went inside the delivery trailer to load empty bins and tripped on the trailer floor and fell inside the trailer. The surface inside the trailer was approximately 2 inches higher than the loading dock surface. The employee was hospitalized with a fractured hip.,1
"An employee was pulling product from lower shelves in a warehouse when a gutter coil located on higher shelving became dislodged, falling on the employee. The employee suffered a lacerated right forearm, a broken pelvis, broken fingers on right hand, a scrape on their head, and possible broken vertebrae in their back.",1
"An employee was trying to free up a drag brake assembly. When it broke free, his hand got caught between the drag brake and a metal stopper resulting in amputation of his left little finger.",0
"While on the second frame of a baker scaffold at a construction site, an employee was tightening screws on pendant light fixtures. The employee leaned against the scaffold to help apply pressure to the screws and the scaffold collapsed. The employee fell approximately 8 feet to the ground and the scaffold landed on top of him. He was hospitalized with two fractured ribs on the right side, a laceration to the liver, and a contusion to the forehead.",1
"While repairing a loader, an employee was struck in the head by a part attached to the counterweight of the loader and was knocked unconscious. The employee was hospitalized with a fractured skull.",1
"An employee was walking down steps when she missed a step and fell down two steps, resulting in a broken ankle.",1
An employee's computer monitor went black. The employee crawled under their desk to check the connection of the cord. The employee raised up and struck the back of her head on the desk resulting in a contusion and head injury that brought on seizure activity. The employee was hospitalized.,1
An employee was working to re-feed a wire rolling machine with wire mesh that had retracted through its roller. The employee's hand got caught between two steel rollers on the rolling machine resulting in a severe laceration and two broken bones. The employee was hospitalized.,1
"A city carrier employee was on their mail delivery route, became overheated, and was hospitalized.",1
An employee was handling a 1/32 drill bit sleeve. He pressed the sleeve cover closed and the drill bit hung on the lip inside. This caused the drill bit to puncture the case and his right thumb. At that point the drill bit broke off and a piece remained inside his thumb.,1
"An employee was setting up a punch and die set when a metal piece on the punch broke off and hit him in the right eye, resulting in the loss of the right eye.",1
"An employee was attempting to bring the 5-ton crane to the coil grabber to hook it up and move it. The coil grabber was still hooked onto another coil. The employee pushed the crane remote button up when his left hand became caught between the coil grabber and the crane hook, pinching his fingers. The employee pulled his hand away and skin on his fingers was removed. The employee also suffered an amputation of the left ring finger above the first knuckle.",1
An employee was on the fifth rung of a step ladder torching flange bolts when they fell backward and landed on a conveyor rail. The employee suffered head and neck injuries.,1
"An employee was cleaning a chute at the hub cutter station and was using a pneumatic chipping gun to remove a piece of steel. The chisel tip on the chipping gun got stuck, and when the piece of steel became free, the employee's finger was caught between the edge of the chute and the falling chipping gun, partially amputating their left index fingertip.",1
An employee was checking in a vendor when she fell to the floor causing tooth fragments to become lodged into her lip and resulting in hospitalization.,1
"An employee was trying to correct a misaligned lid in a tub machine. The machine rotated and caught the employee's right arm, crushing the forearm.",1
"An employee was performing maintenance on a bus. When the employee reached into the engine compartment, the starter engaged and a pulley belt caught the employee's wrist and fractured it.",1
An employee tried to mount a horse and was bucked off. The employee struck his head on the ground and lost consciousness. The employee was hospitalized for a head injury.,1
"An employee was operating a stand-up forklift in reverse when his left leg was pinned between the forklift and a guardrail. The employee sustained fractures of the bilateral femoral condyles, lateral tibial plateau and proximal fibula with moderate lipohemarthrosis, a contusion of the medial thigh adjacent to the greater saphenous vein without evidence of significant vascular injury, and a subcutaneous hematoma lateral to the left knee.",1
An employee was cutting a zip tie off of airlines and electrical cords that connect the cab of a semi-truck to the trailer. When the cut was made the spring that the cords were attached to came back and hit his arm/hand causing his multi-tool to puncture the right side of his abdomen.,1
An employee was operating a UTV on-site traveling east and collided with a front-end loader that was traveling north and turning at the same intersection. The injured employee was struck by the bucket of the loader and sustained broken ribs and a pneumothorax.,1
An employee had an allergic reaction to latex balloons brought into the front lobby for the residents. The employee was hospitalized.,1
An employee was attempting to bend rebar on a building structure while on a scissor lift. The rebar broke off while the employee was bending it and the employee fell from the lift to the ground below resulting in a fractured hand that required hospitalization.,1
An employee was using a pallet jack and pinched their little finger between the pallet jack handle and racking resulting in a fingertip amputation.,1
"The driver of a tanker truck stopped on a rural road, climbed on top of the tanker trailer to open the dome lids prior to arrival at the loading site, and fell off the tanker trailer. The employee suffered injuries to her wrist, pelvis and ribs.",1
"On May 9, 2022, an employee set up a 24-foot fiberglass extension ladder three rungs above the edge of the roof and set the ladder's footers parallel to the brick driveway. The employee was ascending the ladder to inspect the electrical circuit inside the soffit prior to repair when the ladder slipped and he fell about 3 feet to the ground. The employee suffered a broken left ankle.",1
An employee fell off an 8-foot step ladder while cleaning light fixtures resulting in a back injury.,1
An employee fell out of a parked pickup truck and landed on the blacktop sustaining a broken leg and a cut to a hand.,1
An employee was putting a flag on a sensor eye when her shirt got caught in the exit end conveyor of the glass washer. Her left hand was crushed by the conveyor.,1
An employee was clearing a mis-fed block from the cuber machine. The employee lost his footing while stepping down and twisted his left foot/ankle resulting in a fractured left foot.,1
An employee was cleaning the planer when his fingers were caught in the machine resulting in an amputated thumb.,1
An employee was working as a commercial fisherman on a fishing boat when his finger got caught in the block causing an amputation to his left little fingertip.,0
An employee fell over a mop bucket and broke her hip.,1
"On May 9, 2022, at approximately 9:30 p.m. a temporary employee was working on a thermal forming machine. When the employee bent down to reach for a plastic tray, she lost her balance and the moving platform came down on her right hip and fractured it. The machine was unguarded at the time.",1
An employee opened a generator cap and received third degree burns requiring hospitalization.,1
"An employee was spotting a co-worker who was using an extended boom of a powered industrial truck to unload steel beams onto the forks of the truck. A beam on the forklift got caught on 4x4 cribbing. When the employee saw the beam caught on the cribbing, he told the operator to lift the forks. The beams then slid toward the front of the forks and crushed three toes on his right foot between beams. The employee suffered three toe fractures, lacerations, and skin loss.",1
"An employee was replacing a cable on a sprocket on the door of a shipping dock when the door braces shifted and caused weight/tension to be put on the cable. His left hand was caught between the chain and sprocket, resulting in a crush injury to the middle and ring fingers and amputation of the ring fingertip.",0
An employee was rolling metal using a plate roller. The employee's glove got caught in the plate roller and their fingers were crushed.,1
An employee was moving a 40-foot scissor lift closer to the work space area using a joystick controller as he walked alongside the lift. The scissor lift's front right wheel ran over his left heel causing him to fall and fracture his lower left leg.,1
The injured employee was walking on the sidewalk to another portion of the job site. Other employees were taking plastic pipe off a reel; a pipe snapped loose and struck the injured employee in the face resulting in facial fractures.,1
"An employee was using an ironworker to punch holes in a plate when the machine's stripper pinched his left index finger, resulting in lacerations and a fracture that required hospitalization and surgery.",1
An employee was changing vinyl on an outdoor poster panel. A support brace for the catwalk failed and broke away causing the catwalk to collapse. The employee fell 11.6 feet to the ground and sustained a broken ankle.,1
An employee was entering the freezer box while pushing a rolling bakery rack with her left hand and pulling a second rack with her right hand. Her right hand got caught between the freezer door and a rack resulting in the amputation of approximately 1/2 inch of her little finger.,0
"An employee was checking the temperature of a bag sealer when his left hand contacted a roller, which amputated his left ring fingertip.",0
"An employee was using an oxy/acetylene torch to cut up an MRI machine when a heavy piece of steel broke free, fell, and struck the employee resulting in a fractured hip.",1
"An employee was standing behind a paver, about 15 feet from the back, filling up his water bottle from a water cooler. A vehicle broke through the barrel barricade and hit the employee, throwing them into the air. The employee then impacted the ground. The employee was hospitalized with multiple fractures to both legs, and possible injuries to the neck, ribs, and back. Two other employees were injured but not hospitalized.",1
An employee was cleaning out a plugged cyclone when the steel rotor of the airlock amputated three of their fingers. The airlock was not locked out/tagged out at the time.,0
"An employee was clearing jammed parts from the work deck of a powdered metal press. The rotary wheel that moves the parts into the finished part bin had tension in it and rotated, pinching the employee's finger between the edge of the wheel and the frame of the press, resulting in an amputation. The machine was not guarded at the time of the incident.",0
An employee in the warehouse was checking in product that was being returned. The employee was struck by the wheels of a forklift and was hospitalized with fractures to the right leg and ankle.,1
An employee was trying to fix a granulator. His right thumb was caught between the rotating fly blade and the bed blade. The thumb was amputated.,0
An employee was walking on a catwalk above storage bins to move a chute. The catwalk flooring gave way and the employee fell. The employee sustained a leg laceration and a fractured pelvis.,1
An employee exited their mail delivery vehicle. The vehicle rolled and struck the employee's knee resulting in a knee injury.,1
An employee was training on the operation of the tack truck. Vibrations from the tack truck's engine moved the lever that activates the sprayer and hot liquefied tar was discharged onto the employee causing severe burns to both his forearms.,1
An employee was prepping a concrete pipe to be installed in a storm drain. The employee was cutting pipe when the cut-off saw kicked back and lacerated their left armpit.,1
"An employee was cleaning a pin on a metal lathe when their hand got caught in the unguarded chuck of the lathe. The employee's left forearm, thumb, index and ring fingers were broken.",1
An employee collapsed after completing a funeral service and was hospitalized for heat-related illness.,1
"On 5/10/2022, at approximately 3:11 p.m., an employee was using an auger to dig a hole for a fence post when the auger jammed and either struck the employee and/or he was thrown, resulting in a  back injury. He was hospitalized.",1
"Employees were removing hydrogen seal casing using a c-beam to rig it out of its position. The work group had the seal free and floating while attempting to prevent it from being damaged. The c-beam made contact with the end shield without the employees realizing it. They verbally gave a crane operator the signal to cable down, and when he did, the seal came toward the group with more force than expected. The seal casing hit one employee's right hand on his little finger, resulting in a fingertip amputation.",0
An employee suffered heat exhaustion after working outside.,1
A machine operator was changing a large roll of paper when it slipped off the spindle and pinched his finger against the spindle. The employee sustained amputation of the left index fingertip.,0
An employee was using a pry bar to place a stringer plate into alignment with the frame when the parts snapped into alignment and the employee's right middle finger and index fingertip were pinched between the parts. The employee's middle finger was lacerated and their index fingertip was partially amputated and fractured.,0
"An employee was attempting to seal a leak at the strainer plug located on a pressurized anhydrous ammonia toolbar. The employee was tightening a plug on the strainer using a wrench when the plug failed and a burst of anhydrous ammonia hit the employee in the face and torso. The employee suffered chemical burns to the eyes and mouth as well as the left side of their head, neck, and shoulder.",1
An employee was moving a palm tree and was struck by a skid steer. The employee's left foot was run over and fractured.,1
"An employee was transporting a motor on a metal cart when it struck a pothole in the floor causing the motor to shift and crush the employee's right index finger, resulting in fingertip amputation.",0
An employee completed smoke jumper training and suffered a muscle injury and a lung infection.,1
"An employee was pulling pieces of wood through a metal die rack when their left hand slipped into the rack, resulting in an amputation of their left ring fingertip.",0
An employee had been transferring material from one table to another. The employee noticed material was falling. He tried to stop it from falling and was struck by the material resulting in a fracture to the left fibula just above the ankle.,1
An employee was troubleshooting a machine. The machine started and his right index and middle fingers were caught in the machine's belt resulting in fingertip amputations.,1
"An employee was working on a motor home when one of the jacks flipped, causing the motor home to come down on the employee. The employee sustained multiple pelvic fractures requiring hospitalization.",1
"An employee was attempting to prevent two patients from engaging in an altercation when the employee fell to the floor, resulting in a fractured left hip.",1
"A temporary employee was using a brake press to bend a part when their right middle finger became caught in the brake, amputating the fingertip.",0
An employee conducting floor sheathing on a newly constructed residential home fell through the floor joists to the basement below. The employee sustained a punctured lung and fractures to the ribs and collar bone.,1
An employee was driving his car between buildings at a facility when he was shot and suffered a gunshot wound.,1
A forklift operator was picking up a cylindrical container filled with brass shavings and dumping it into a container. The overflow was being swept up by the injured employee and put into a cardboard box. The cylinder rolled off the forklift forks and flipped over onto the injured employee resulting in broken bones in the back and a possible concussion.,1
An employee was utilizing an extension ladder to reach the work area. The employee fell 20 feet from the ladder to the ground below resulting in hospitalization with injuries to the back and ankle.,1
"An employee was blowing out a section of machinery for cleaning and inspection. The employee lost balance and attempted to catch himself, causing his hand to go into the fan belt and pulley resulting in an amputation to the left middle finger.",0
"An employee was holding a casting with his right hand when the band saw started and jumped, pulling his fingers into the saw blade. He suffered partial amputations to two fingers on his right hand.",0
"An employee was pulling freight off a trailer with a pallet jack when the freight shifted and fell onto the employee's hand, resulting in a ring fingertip amputation.",1
An employee was using an electric pallet jack to move stock when their left thumb became caught between the pallet jack and a steel structure. The thumb was amputated.,1
An employee was moving a swing stage in an air plenum. The employee had just raised the swing stage to pass over a divider. The employee stood on an angle brace to push the pendant over. The employee then jumped down and their feet got caught in a floor vent causing them to fall backward and fracture both legs.,1
"A mill operator was reducing the size of a tube. When it came out of the machine, the tube bowed, corkscrewed out, and struck his left forearm. The employee was hospitalized for a ruptured artery in the left forearm.",1
An employee was working on slip forms from a suspended scaffold. The employee jumped from the suspended scaffold to the ground about 25 feet below. The employee's right hip was injured.,1
"On May 10, 2022, an employee fell down the stairs and sustained a broken ankle requiring hospitalization.",1
An employee was on an 8-foot ladder installing a security tube in a ceiling. The employee lost balance and fell to the floor resulting in injuries to their left wrist and left ankle that required surgery.,1
"An employee was carrying a bucket of paint up a ladder to the third floor of a building when they fell 15-20 feet to the ground below, resulting in a dislocated left shoulder.",1
An employee was cutting beef on a vertical band saw and amputated three fingers as well as part of the palm of their left hand.,0
"An employee was engaged in fire line construction that required digging and scraping with a Pulaski axe. The employee began experiencing fatigue and muscle cramping. The day prior, the employee completed smokejumper physical fitness testing. The employee was transported to the hospital with a heat-related muscular injury.",1
A mechanic was working on a machine and suffered a partial amputation to his right thumb when his thumb was pulled between the belt and pulley.,0
Employee was operating a table saw when its blade cut his right ring and little fingers and amputated his right middle finger at the first knuckle. He was hospitalized.,1
An employee had been cleaning equipment. The employee was struck by falling equipment and sustained fractures to his right lower arm.,1
"An employee was cleaning a cutter machine with water. When she opened the blade cover, the machine's blade cut her index, middle and ring fingers. She suffered amputations to the index and ring fingers. The machine was not locked out or tagged out at the time.",0
"An employee was stepping down from the roof of a tank onto an A-frame ladder. The ladder kicked out and the employee fell to the concrete floor 8 feet below, suffering injuries to the back, neck, and hip.",1
"An employee reached into the point of operation on an assembly machine while another employee actuated the machine with a two-hand control. The injured employee's left middle finger became trapped between the part and the actuated piston on the machine, causing a partial fingertip amputation.",1
"An employee was on a scissor lift inside a newly constructed building, installing batten board siding. The employee fell to the concrete floor 9 feet below and suffered a head injury that caused a brain bleed.",1
Two forklifts collided in an aisle. One of the operators suffered a fracture to the left big toe.,1
"On May 11, 2022, a pedestrian boarded a bus and assaulted the driver. The driver sustained a cut to the left side of the face and cuts to several fingers on the right hand.",1
An employee slipped while walking down stairs and suffered a broken left ankle.,1
An employee was walking at a jobsite and stepped on a yellow composite sidewalk cover. The cover became dislodged and he fell into an excavation that was 46 inches deep. The employee sustained injury to their left knee and lower back.,1
An employee was installing trusses. A row of trusses tipped toward him and he fell from the tops of the trusses to the concrete floor about 12 feet below. He suffered a broken elbow and leg.,1
"An employee was moving gravel with a skid steer. The skid steer lunged forward and the employee fell backward. The employee's feet were caught between the standing plate and the framing above it, and both ankles were broken.",1
"An employee was reversing a 2,000-gallon water truck when it went into a ditch and rolled over. The employee sustained a fractured leg and cuts and scrapes and was hospitalized.",1
"An employee was at a customer location taking inventory of stock and placing a weekly order. He was stepping up into the ""bull pen"" area behind the cash register and caught his foot. He fell and broke his left hip.",1
"On May 11, 2022, an employee had an allergic reaction due to a customer spraying perfume in the changing room. The employee broke out in hives and was hospitalized.",1
An employee was mowing a residential yard and began to feel unwell. The employee became unresponsive about 10 minutes later and was hospitalized for heat stroke.,1
"An employee became ill and developed heat cramps while building tires. The employee was hospitalized, suffering from heat-related illness.",1
"On May 11, 2022, an employee parked her vehicle and proceeded to walk into the facility. The employee stepped on uneven pavement and fell to the ground on her left side. After a few seconds, she got up and walked into the building. Later she had a headache and went to the storage room to take a break. A few moments later, the employee was found lying on the floor, unresponsive. The employee was hospitalized with an injury to her arm and left side of her body.",1
An employee was welding on a dirt drag box and needed to flip it over. A strap was connected to a tow motor to flip the box. The strap came off and the employee's right little finger was caught between the box and the concrete. The finger was amputated at the second knuckle.,0
"An employee was installing a new pump for a filler. As the pump was cycled to ensure it was working properly, its ball valve amputated his left index fingertip.",0
"An employee was moving material using an overhead crane with a four-leg chain sling. One leg of the sling got caught on a roller support, then released as the employee pulled on the sling. The hook on the leg hit the employee in the face, causing a 2 1/2-inch laceration to his chin and damage to the jaw and teeth.",1
Employees had been installing cones for traffic control. Two employees had a physical altercation resulting in injuries including a left knee sprain and left orbital fracture.,1
An employee working at a coater had their right little finger amputated by the gears of the machine. The gears were not locked out at the time.,1
"On May 11, 2022, an employee was cutting out a piece of corrugated pipe in an excavation. An oblong section of pipe rolled into the excavation and pushed the employee against another pipe causing a fractured pelvis that required hospitalization.",1
"Two employees were installing a 6-inch test T in a vertical 6-inch cast iron storm riser. The T was to be placed approximately 2 feet above floor level and required cutting and removing a section of the 6-inch storm riser. The two employees placed a riser approximately 5 feet above the section they intended to remove and utilized a 5-foot piece of 2"" cast iron to support the riser clamp and ultimately the 6-inch cast iron pipe above the section being removed. They then cut and removed the 12-inch section of pipe. Employee 1 began installing the rubber no hub gasket on the cast iron riser coming through the floor while Employee 2 was installing the rubber no hub gasket on the cast iron riser coming down from the floor above. As Employee 2 was installing the rubber no hub gasket on the upper section of pipe the riser clamp slid off the 2-inch cast iron. This resulted in the upper section of pipe falling when the no hub band holding it in place failed to support the weight of the section of pipe. The upper section of pipe fell on Employee 2's right thumb smashing it between the two sections of pipe. The employee's thumb was fractured and lacerated requiring surgery to repair.",1
"An employee was bending over to clean up spilled containers in a warehouse. A box of empty wine bottles shifted in a pallet rack and fell, striking and injuring his lower back.",1
"An employee fell from a 10-foot ladder, landing on the floor and suffering a concussion, a left arm injury that required surgery, and cuts and scrapes.",1
A loader was traveling to a ballast pile when the corner of its bucket struck and lacerated an employee's upper right thigh.,1
An employee was cutting strip stakes using a handheld bone saw. The back of the saw cut off the top of the knuckle on his middle finger.,1
An employee in training was assisting a calendar mill operator when their right hand was caught between two rollers and crushed.,1
"An employee was unloading a trailer. The trailer's tailgate fell and struck his foot, breaking his big toe. He was hospitalized and required surgery.",1
"On 5/11/2022, an employee was feeding sheet metal into a brake press when their glove got caught and their hand was pulled into the machine resulting in a fracture and amputation.",1
An employee was trimming a small palm tree with a chainsaw. The saw kicked back and lacerated the employee's right arm.,1
"An employee was using a weed trimmer in a pond area. Something hit his eye, which became increasingly irritated over the course of the day. He was hospitalized that evening, undergoing surgery for the eye injury.",1
"An employee was moving a coil of metal with a crane using a C-hook. As he was moving the hook, his left hand was caught between it and a second coil of metal on the floor. His middle finger was pinched between the spine of the C-hook and the edge of the metal coil on the floor. He suffered an amputation to the flesh at the tip of the finger, as well as a fracture to the fingertip.",0
"An employee was playing basketball with a student as part of the day's program. He suffered ruptures to tendons in his knee and was hospitalized, requiring surgery.",1
An eye bolt fell and crushed an employee's right index finger against a piece of equipment.,1
"Two employees were loading an air compressor into a customer's car behind a store. A driver, seeking to use a cut-through behind the store and finding it blocked by the employees' work, got into an altercation with the employees. Then, while the driver was leaving, their car struck one of the employees, who suffered a possible concussion.",1
"On May 11, 2022, an employee was testing a projector system when he fell down 7 steps and suffered a broken skull. He was hospitalized.",1
"Vapors from a 350-gallon tank ignited while an employee was welding a washer on the tank's lid. The tank exploded and the employee suffered fractures to the left and right arms and wrists, damage to the right ring finger, and lacerations to both hands.",1
An employee was working inside a stair core when a taper tie fell from the north concrete wall form and struck his hard hat. The employee was hospitalized with a fractured C3 vertebra.,1
"While installing steel decking on the sixth story, an employee walked on unsecured decking that displaced causing the employee to fall approximately 10 feet to a lower level. The employee sustained a broken fibula requiring hospitalization and surgery.",1
An employee was flagging traffic to slow down for a customer operating an excavator. The excavator reversed and ran over the employee's feet. The right foot sustained fractures and the left foot was injured.,1
"An employee was operating a bag machine. A forklift placed a pallet on the conveyor. When the forklift pulled back out, the pallet tipped and a plastic roll (weighing approximately 1000 lbs.) fell off the pallet, pinning the employee's leg between the work station and the conveyor. The employee sustained a hematoma to the lower leg.",1
"An employee was positioning a bag cart when a tire hit the curb causing the tongue to snap back and strike the employee, knocking them down. The employee hit their hip and it fractured.",1
"An employee was adjusting a wire tie machine using an Allen wrench when it actuated, amputating the employee's fingertip.",1
"During installation of a discharge valve, the injured employee was leaning on the valve while employee 2 used a pry bar to help line up the valve housing with the valve. When the valve moved, the injured employee's hand was caught between the valve housing and valve facing resulting in an amputation to their right middle fingertip.",0
An employee was cutting ceiling suspension trim with a utility knife and a sheet rock square. The knife slipped and amputated the employee's left index fingertip.,0
"An employee slipped and fell in an elevator area, her head striking the elevator doorjamb. She suffered a head laceration, a broken arm, and broken ribs.",1
An employee was performing maintenance on an abrasive blasting pot. Residual air pressure in the pot caused the cover and blasting grit to strike the employee's face and neck area causing contusion/abrasion injuries and particulate in the right eye.,1
"An employee was removing long forks from a forklift. A fork fell off and struck the employee's right leg, breaking it.",1
An employee reached down to pick up a rattlesnake that was under construction materials and was bitten on the right index finger. The employee was hospitalized.,1
An employee was removing a child's car seat strap which had become lodged in a conveyor belt when their right hand became caught in the conveyor. The ring finger was amputated to the knuckle and the middle finger was lacerated.,1
An employee was getting materials off a truck and fell to the ground landing on his back and arm.,1
"An employee was unloading product on a pallet from a tractor trailer. The employee was using a sling because there was no loading dock at the establishment. While using the sling to pull the pallet to the back of the trailer, the pallet failed and the employee fell from the trailer to the ground. The employee sustained five broken ribs, a fractured right orbital bone, and a broken nose.",1
An employee was setting up a hydraulic press to manufacture plastic bottles when his left hand got caught in the machine and he sustained amputation(s) to finger(s).,0
An employee was operating a cardboard bailer when his thumb got caught between the hook and chain in the bailer resulting in amputation of the left thumb tip.,0
"An employee was preparing to conduct welding on a propane tank. The employee was lighting a torch when a flash fire occurred due to propane fumes coming from the tank. The employee sustained burns to the face, chest, stomach, and arms.",1
"An employee slipped and fell in the bed of a bucket truck, suffering a broken left wrist.",1
"An employee was adjusting die liners in a forging hammer. The hammer engaged, and its key struck the employee's right arm, causing a compound fracture.",1
"On 5/12/2022, an employee was walking toward the parking deck on the second floor after getting her laptop updated. She was pulling a basket on wheels from behind when the left front wheel hit her right heel causing her to fall onto her right hip. The employee sustained a broken hip, requiring hospitalization and surgery.",1
"Employees were putting together a trench box. An employee was attempting to install one of the large, heavy pins that held the box together when the box moved and crushed the employee's toe/foot.",1
"An employee was in a bucket truck, swapping lashings of coaxial cables, when he was shocked. He suffered second- and third-degree burns to the left arm and the torso.",1
"On May 12, 2022, an employee was extending electrical conduits in block walls from the second stage of a scaffold when he fell about 10 feet to the ground. He was hospitalized with broken ribs and a bruised back.",1
"An employee was climbing down a fixed ladder from a roof. The employee fell off the ladder and landed at ground level about 18-20 feet below, suffering a broken lower back vertebra.",1
"An employee was working between railcars on an active railroad track to connect the airbrake. Another employee moved the railcars, striking and running over the employee resulting in amputation of both legs.",1
"After a concrete pour, a boom was being placed on top of the core. The boom made a sudden mechanical movement and struck the employee, who suffered injuries to three vertebrae and both shoulders.",1
"An employee was disconnecting a water discharge hose from a portable pump. Hot water sprayed him, burning his forearms and left thigh/leg.",1
"On May 13, 2022, an employee was engaged in a concrete pour for a building used for bulk salt storage. The employee set up scaffolding brackets and then placed a scaffolding plank onto the brackets. The employee then arranged for a concrete truck to dump concrete inside the forms that had already been installed. The employee stood on the scaffolding plank as the concrete was being poured in and used a shovel to pry on the rebar as it shifted when the concrete began flowing into the form. The shovel broke, the employee lost his balance, and fell to the ground. The employee was hospitalized for a broken right wrist and a shattered right ankle. Both injuries required surgery.",1
"At about 2:00 p.m. on May 13, 2022, an employee was holding a horse's hoof while washing it with medicated shampoo. The horse became startled and moved his hoof to the cement ground, catching the employee's right ring finger and amputating it above the nail.",1
An employee had just finished connecting an auger attachment to a skid steer. He was driving the skid steer to another area when the attachment detached and hit him in the lower left leg. The employee's left leg was fractured and lacerated.,1
An employee stationed at the self checkout fell and broke her hip.,1
"An employee was installing a new machine. Noting that it looked different from the existing one, the employee began to evaluate the existing machine's mounting. The machine actuated and pinched the employee's finger, causing a fingertip amputation.",0
"An employee was emptying pistons from a tray into a feeder bowl. The tray shifted while it was being moved, and its weight brought the employee's hand down onto the feeder bowl rim. His left little finger was crushed between the tray and the rim and was partially amputated.",1
"An employee was inside a livestock trailer that had just been cleaned. He was inspecting the trailer when someone called his name. He turned around, slipped, and fell out of the trailer. The employee landed on the concrete floor and sustained a broken wrist requiring surgery.",1
An employee was standing on a catwalk making adjustments to a machine. The employee started to walk and fell off the end of the catwalk. The employee sustained fractured ribs and a possible bruised lung.,1
"An employee was working from a ladder platform approximately 5 feet tall. When he began to descend the platform, he lost balance and fell to the ground, landing on his feet and breaking his ankle.",1
An employee was using an upcut saw to cut 2x4 wood when all four fingers on his left hand were amputated by the sawblade.,1
An employee was washing a wet breader applicator. He attempted to remove something from inside the pipe of a pump and the end of his left index finger was amputated.,0
"An employee was placing product onto a conveyor that feeds a belt fed saw. His left hand came into contact with the saw blade causing partial amputations to his index, middle, and ring fingers. A guard was in place at the time.",0
"On May 13, 2022, an employee slipped on the roof of a newly built two-story house on stilts, landing on a gravel driveway about 30 feet below. He suffered a compound fracture to the right leg, a head injury, fractures to both elbows, and facial fractures. He was hospitalized.",1
A mechanic working for Energy Transfer was trying to insert a compressor piston when it amputated his right middle fingertip.,0
"At approximately 8:30 AM, a maintenance team was troubleshooting a metal detector that was continuously rejecting product. The directional air valve and piping had been disassembled during sanitation and were not re-installed correctly. Maintenance team members disassembled a 3-foot section of piping to visually identify the issue. The injured employee was removing some product from the pipe when the directional air valve actuated. The employee's left little finger was pinched by the valve, amputating the fingertip.",0
"An employee was climbing up a manlift to a screw conveyor to perform preventative maintenance. He fell backward off the manlift to the concrete floor about 7 feet below, suffering bruises to the right leg and muscle damage. He was hospitalized.",1
"An employee was trying to rotate the drive shaft of a lateral sprayer with a crescent wrench. When the shaft rotated, the tip of the employee's left thumb was pinched between the wrench and the lateral cross-bracing, resulting in a fingertip amputation. The employee was hospitalized.",1
An employee was standing at the edge of a trench. A backhoe's bucket and arm swung toward the trench and pushed the employee in. The employee suffered six broken ribs and a partially collapsed lung and was hospitalized.,1
An employee slipped on wet grass and suffered an ankle injury.,1
An employee's leg was crushed between a truck and a parked vehicle.,1
An employee was taking a water break when a truck backed into him. The employee sustained a broken sternum.,1
"An employee was replacing a cutting die on a die cutter machine. While the employee was removing the cutting die board from the machine, the machine was reenergized and his left hand was pulled into the rotating cutting die board resulting in amputation of his left thumb, index, middle, and ring fingers.",1
"An employee was carrying a glass vase that held flowers and water. The vase became unstable, and while she was trying to right it she fell to the floor, hitting her head. She suffered a brain bleed and was hospitalized.",1
"Debris was thrown down a trash chute in the area and the chute broke open, causing the debris to strike an employee in the right ankle. The ankle was broken and the employee was hospitalized.",1
An employee was installing HVAC in a residential building when a piece of sheet metal lacerated his right wrist. He was hospitalized.,1
"A temporary employee was wrapping a pallet of chicken with shrink wrap. The employee was struck by a forklift and pinned against the pallet. The employee sustained bruising, two broken ribs on the left side, and a punctured left lung.",1
"A carrier had faulted out while going through a gate switch and the gate closed on it. The injured employee was helping to push the carrier back through the gate. When the carrier was clear, the gate closed on the employee's finger, causing a crushing injury with an exposed fracture.",1
An employee was working on a lathe with sand paper. The lathe amputated his right middle fingertip.,0
"On May 14, 2022, an employee was strapping their truck and a beam started to fall down. The employee turned and started to run away and injured his quadriceps. He was hospitalized with a muscular injury to the left leg.",1
An employee was setting roof anchors on the roof of an apartment complex when he slipped and fell 15 feet to the ground resulting in a hip fracture.,1
"An employee was floor selecting. As he stepped off his pallet jack, he twisted his right ankle resulting in a fracture. He was hospitalized.",1
An employee was pushing a cart of clothes when they tripped over a wheel and fell to the floor. The employee was hospitalized with a fractured hip.,1
"An employee was cutting a fitting on a gas tank using a handheld grinder. A spark from the grinder caused a fire, and the employee suffered burns to the legs and elbow.",1
"An employee was driving a pallet jack to move products in a warehouse. While going backward, the pallet jack turned and hit a bollard. The employee's finger was caught between the steering controls and the bollard resulting in loss of the tip of his fingernail. The employee was hospitalized.",1
"An employee had been moving furniture out of a house. At the end of the day, the employee passed out, possibly due to heat stress.",1
"On May 15, 2022, an employee was disposing of rubbish in a trash compactor. He slipped and fell on a metal plate installed to repair a hole in the compactor area floor, suffering a broken right tibia. He was hospitalized.",1
An employee was unplugging a blowline when his hand got caught in the machine resulting in amputation of the tips of his right ring and middle fingers.,0
"An employee was at the self-checkout heading toward the customer service area when she slipped, popped her knee, and hit her head as she fell to the floor. The employee was hospitalized with a broken kneecap.",1
"An employee was connecting testing equipment to an underground propane storage tank's regulator. Liquid propane sprayed from the tank's relief valve onto the employee's face and neck. He suffered cryogenic burns to the face, neck, and mouth.",1
"An employee moved the equipment that pours molten metal into molds away from the access platform so that the overhead jib crane could remove the plug on top for cleaning. When he attempted to jump back to the access platform, which was approximately 39 inches away, his open fire-resistant shirt caught on the guardrail gate, causing him to fall approximately 14 feet to the floor below. He suffered broken ribs and bruises and was hospitalized.",1
"On May 15, 2022, an employee developed back pain while pulling cases of products off shelves. He was hospitalized.",1
"An employee tripped and fell on a sidewalk, suffering a broken leg.",1
"The injured employee stood beside his pallet jack while selecting from a rack. He attempted to move the pallet jack forward to create more space for a second employee. The pallet jack rolled forward and struck a pallet, pushing it into the injured employee's left foot and pinching the foot against a metal rack. The foot injury required hospitalization and surgery.",1
An employee was walking in the cafeteria area when they fell on the floor and sustained a head injury. The employee was hospitalized.,1
An employee was working to restore power at a facility. He opened a temporary switchgear and a grounding wire made contact with a live fuse resulting in an arc flash. The employee sustained burns to the right arm and the left side of his face.,1
A U.S. Forest Service smoke jumper landed on the ground hard after jumping from an aircraft during a training exercise. The employee suffered a dislocated hip and a broken pelvis.,1
An employee was preparing to add a chemical to a production vessel from a 55-gallon drum. The chemical splashed into the employee's right eye and face.,1
"An employee was helping to unload a box truck using a forklift. The box truck was parked on the very bottom of the outside loading dock. The employee drove the forklift down the loading dock approximately 25 feet and was waiting on the box truck driver to adjust a pallet of screws/nails at the back of the truck to allow the forklift forks to reach the pallet. The employee exited the forklift to help the driver adjust the pallet. As soon as the employee started to walk between the forklift and the box truck, the forklift started to roll down the hill approximately 10 feet, pinning the employee between the forklift and the box truck. The employee was hospitalized for a fractured pelvis.",1
"An employee was troubleshooting a non-working cylinder on a grout plant. The cylinder activated while the employee's left index, middle, and ring fingers were inside it, causing amputations to all three fingertips.",0
"An employee fell, hitting his head on a cement shop floor. He was hospitalized.",1
"An employee was repairing a tire on a piece of machinery. The employee was attempting to pry rubber back to replace a seal when the prybar slipped and caused the tip of his left index finger to be pinched between the two-piece metal rim, resulting in the amputation of flesh.",0
"At about 2:45 p.m. on May 16, 2022, an employee was removing a steel bracket from a tractor when it fell on the employee's left foot. The employee suffered three broken toes and was hospitalized.",1
"An employee was putting up blocking in trusses during construction of a restaurant. When the employee moved to a new blocking area, he stepped onto a 2 x 4 truss bridge. The fasteners holding the truss bridge pulled out, causing the employee to fall 10 feet onto an upright 8-foot ladder and then onto an air tank. The employee sustained a broken right forearm.",1
An employee was working from a swing stage scaffold that was positioned 28 feet high on a building. A crane was lifting and moving porta-johns. The crane struck the swing stage causing it to collapse. The employee's left elbow caught on a metal part of the scaffold causing a laceration that required hospitalization.,1
"An employee was pushing tongs away from casing collars. The tongs were let down and pinched the employee's right ring finger against the casing collars, causing an amputation to the fingertip.",0
An AutoZone employee was stabbed in the abdomen with an unknown object by another AutoZone employee after a physical altercation.,1
"An employee was cleaning near a gearbox. A protruding bolt in the gearbox caught her trousers, dragging her right leg into the box. She suffered a fracture to the end of her right tibia.",1
"An employee was operating a walk-behind mower when it struck a support/guy wire for a power pole. The guy wire began to whip and came in contact with an energized power line at the top of the power pole. Electricity travelled down the wire, through the machine, and shocked the employee. He was then thrown from the mower. The employee sustained electric shock and burns to the right hand and left big toe.",1
"An employee was servicing a range target that moves along a rail system. The target moved, running over his left hand and crushing his left little finger. The employee sustained an amputation to the left little finger.",1
"An employee was putting another support under a trailer when the jack failed and the frame of the trailer fell onto the support, amputating the employee's thumb tip.",0
"An employee was moving bar stock on the conveyor for a vertical bandsaw. The conveyor actuated, and his left index finger was crushed between a conveyor roller and the piece of bar stock he was working with. The fingertip was medically amputated.",0
An employee was moving bar stock. The employee's left index finger was caught and crushed between a conveyor roller and a piece of the stock. The finger was medically amputated.,0
"An employee was reaching for a button to lower the liftgate of a semi-trailer. The employee tripped, fell to the pavement, and suffered a broken right arm.",1
An employee was walking a patient to their car. The employee lost their footing and fell on the parking lot sidewalk fracturing their knee. The employee was hospitalized.,1
An employee was turning to walk away from a compressor when a 2-inch pipeline detached and struck the employee's back. The employee suffered a back fracture and was hospitalized.,1
"At 9:10 a.m. on May 16, 2022, an employee was on a roof, moving sheet metal roof panels. The employee fell from the roof to a concrete pad below and suffered two broken wrists, a knee injury, and head injuries.",1
"An employee fell from a ladder to the ground 8-10 feet below, suffering a compression fracture to a thoracic vertebra.",1
An employee was working at a desk when a piece of wooded décor fell from the ceiling onto her head and back.,1
"An employee was taking a work capacity test for firefighting. While walking with a pack, he developed dizziness and breathing difficulty and began going into shock. He was hospitalized, suffering from heat-related illness.",1
"An employee was using a table saw. The saw blade cut four of his fingers, two of which were medically amputated.",0
"An employee fell from an elevated bucket truck while hanging pole guy wire. The employee landed on the ground and sustained a broken wrist, broken ribs, and a punctured lung.",1
"An employee was pulling a piece of square bar (weighing about 354 pounds). The bar slid and pinched the employee's right middle fingertip against another bar, causing an amputation (as well as a laceration and fracture) to the fingertip.",0
"An employee was pulling a dead sow from a lactation crate. The snare slipped off the sow, causing the employee to fall to the ground and suffer a broken hip.",1
An employee was servicing a fiber optic cable drop to a customer's home. The fiber optic line became energized and the employee received an electric shock.,1
"An employee was using an electric powered lift to raise stock up to the front of a machine. A pallet of material shifted while on the lift, causing the lift to strike the employee. The employee sustained a broken leg.",1
"An employee fell from an aluminum extension ladder leading to the roof of a home. The employee landed on the ground 20 feet below and suffered broken ribs, as well as bruising to the arm and back.",1
An employee was performing landscaping work outside and was found unconscious. The employee had suffered a heart attack.,1
"An employee tripped and fell to the ground, suffering a broken hip. He was hospitalized.",1
"An employee was connecting wiring to an actuator to power a valve. As he was testing whether the valve would open and shut, material rushed into the pipe it was attached to. The pipe came free, flipped, and struck the employee's back and ankle.",1
"An employee was cutting a piece of wood with a miter saw. The wood pulled the employee's left thumb into the sawblade, which severely lacerated it resulting in amputation.",1
"At about 12:30 p.m. on May 17, 2022, an employee was on a ladder applying shingles to a bird box that was about 12 feet off the ground. The employee fell from the ladder to the ground and suffered a neck injury and a fractured left wrist. The employee was hospitalized.",1
"An employee was cleaning near a gas stove. The flame from the stove caused a first-degree burn to the employee's face, and the employee was hospitalized.",1
"An employee was repairing a cart rack in a parking lot. The employee's finger was caught between two cart racks, and the fingertip was amputated.",0
An employee was washing brick with a cleaning chemical containing hydrofluoric acid. The chemical penetrated his glove and burned his right hand.,1
"Employees were assisting with a rig down by picking up trash and lumber. While cleaning the site, an employee of Caltex was struck by a forklift. The employee sustained a tear to their spleen resulting in hospitalization.",1
An employee was cleaning a maintenance room when a bottle of disinfectant fell off a shelf. The chemical splashed and burned the employee's right foot.,1
"On May 17, 2022, an employee suffered a heart attack while performing tire repair at a customer's location.",1
An employee was unloading trash carts from a box truck. The employee fell from the truck's liftgate and suffered a broken right hip.,1
An employee was operating a stand-up powered industrial truck and struck a support column. The employee suffered crushing injuries to their left foot and leg.,1
"An employee cut an existing pipe and was moving it when they fell off the roof edge, landing on the ground 25 feet below. The employee was hospitalized for a fractured hip and pelvis, a fractured finger, and a fractured L1 vertebra.",1
"Three employees were loading a 42-inch by 144-inch steel frame onto a paint line. When the frame was pulled from its bundle, it fell to the ground. Its base plate hit one employee's left forearm and lacerated it.",1
An employee's right thumb was crushed in a doorjamb. The employee was hospitalized.,1
An employee had been transporting finished vehicles from the assembly plant to the storage yard. The employee reported feeling light-headed and dizzy and was hospitalized with dehydration and exhaustion.,1
"On May 17, 2022, an employee was trying to lower a dock plate onto a trailer when he slipped and fell. His finger became caught between the dock plate and the floor resulting in degloving and a partial amputation.",1
"An employee was demolishing a wall when the ceiling fell, pinning him to the floor. He suffered back, neck, and chest injuries and was hospitalized.",1
"An employee fell from an order picker to the floor about 10 feet below, suffering fractures to the spine, the pelvis, and an arm.",1
"On May 17, 2022, an employee was operating a riding pallet jack when it drove off a loading dock. The employee suffered broken ribs and facial injuries.",1
An employee was on a 90-inch high cantilever ladder inspecting a mobile blood trailer at the facility. The employee and the ladder fell to the concrete ground. The employee sustained a fractured L1 vertebra and was hospitalized.,1
An employee of a professional baseball team was hit by a ball while crouching behind a batter. The employee suffered an abdominal injury.,1
"On May 17, 2022, an employee was loading a steel coil onto the coil reel on a stamping press. Because the coil's inside diameter was slightly larger than ordered and the reel expanders would not open wide enough to hold the coil, steel blocks were being used to take up the space. The employee was holding the blocks in place while another employee operated the controls to widen the expanders. As the expanders widened, a block slipped off the expander and pinched the employee's thumb and index finger, causing partial amputations to both.",0
An employee was filling the seed hopper on the lateral screw conveyor and leveling the seed in the hopper with his right hand when his thumb entered the discharge hole and was amputated above the first knuckle.,0
"An employee slipped and fell while exiting a dump truck, suffering a neck injury. The employee was hospitalized.",1
"At 10:15 a.m. on May 17, 2022, an employee was cutting a sheet of half-inch oriented strand board on a table saw when the saw blade contacted the employee's right hand. The employee's index, middle, and ring fingertips were amputated.",0
"On 5/17/2022, at 10:29 AM, an employee working behind the counter at the register sustained heat exhaustion. The employee was hospitalized.",1
"An employee fell while stepping off a forklift platform, landing on the concrete floor about 44 inches below. The employee suffered head and neck injuries, causing a brain bleed.",1
An employee was checking the fuel level in a portable generator when he contacted a live electrical part and was shocked.,1
An employee tripped while entering a freight elevator and struck his head above the left eye on the elevator's guardrail. He was hospitalized.,1
"At about 11:15 a.m. on May 17, 2022, an employee was walking in a tote bin storage area when she stepped on top of a metal pallet alignment guide, lost her footing, and fell to the floor. She suffered a broken right foot and was hospitalized.",1
"An employee was struck by a forklift, suffering fractures to the left foot.",1
"An employee threw metal chairs into a recycling dumpster, then climbed into the dumpster to make adjustments to make more room. While getting out of the dumpster, the employee fell to the ground and sustained a fractured left rib.",1
"An employee was in a front-load pallet jack, moving a pallet, when the pallet jack's steering system jerked sharply. The employee was pinned between the pallet jack and a rack of merchandise; the employee's left foot and ankle were lacerated, and the employee was hospitalized.",1
"An employee was using an overhead crane to lift a half-inch steel plate off a plasma table. The plate shifted and fell, striking the employee's upper right leg and breaking it. He was hospitalized.",1
"An employee was climbing down a ladder on the back of a truck. The employee fell to the ground, suffered 11 broken ribs, and was hospitalized.",1
"While descending a ladder, an employee fell about 5 feet to the ground, shattering his ankle and breaking his leg.",1
"An employee was assisting a forklift operator to load an 8-piece bundle of metal plates onto a flatbed trailer. The employee was adjusting the board on the trailer to lay the plate down while the load was above on the forks. The bundle slid/adjusted while on the forks and pinched the employee's right middle finger against a wood block, amputating the fingertip.",0
"An employee was stocking product in display cases. The employee bumped into a refrigeration case while holding a crate, lost balance, and fell to the floor. The employee sustained a fractured left femur.",1
"An employee was using a shearing machine. As he positioned a metal bracket to be cut, his hand slipped. The machine then activated and its blade amputated four fingers on his left hand. He was hospitalized.",1
"On 5/18/2022, an employee was using a band saw to cut omasum when the saw blade caused a partial thumb amputation.",0
An employee fell 12 feet from a scaffold and struck his head on the ground. The employee sustained a head injury.,1
An employee was operating a grain bin sweep when the conveyor caught and broke the employee's arm.,1
"Two employees were pushing a stand-on mower out of a truck. It slid down the ramp and struck an employee from behind, breaking his leg.",1
"An employee was on the forks of a forklift, about 10 to 15 feet above a concrete floor, hanging pipes on a cotton gin. He fell head first to the floor and suffered multiple brain bleeds, multiple skull and facial fractures, and a broken upper back. He was hospitalized.",1
"An employee was working from a step ladder to replace an outside aerial cable drop running from a pole to a customer's house. He fell from the ladder to the ground, suffered a broken hip, and was hospitalized.",1
"On May 18, 2022, an employee was removing an air valve when it blew back under pressure, hitting the employee in the chest and face. The employee suffered a broken jaw.",1
An employee was pulling a dock plate into a trailer at the loading dock. The dock plate fell onto his right ring finger causing amputation.,0
"The injured employee pulled a knife on Employee 2. Employee 2 then went to his truck, got a handgun and shot the injured employee in the lower leg. The injured employee was hospitalized.",1
An EMT had responded to a call at a bar. While treating a patient inside of the ambulance the patient pulled out a gun and shot the EMT in the left shoulder.,1
"An employee was preparing to use a grill to cook food. When he lit it, flames knocked him back and burned his face, arms, and feet.",1
An employee was performing preventative maintenance when he manually turned a machine and his arm got caught in the mixer resulting in a broken arm.,1
"An employee was walking on rafters. He slipped on an unsecured rafter and fell through sheetrock to the ground below, suffering a broken lower-back vertebra.",1
"At approximately 9:45 PM on 5/18/2022, an employee was climbing an 8-foot step ladder. The ladder fell out from under him and he landed on the floor breaking both wrists.",1
"While on a truck, an employee was assisting a forklift driver with placing a slab onto the clamp. The slab fell forward and struck the employee who then fell from the truck bed and sustained fractures to the lower body.",1
"An employee was unjamming a log conveyor using a chainsaw. The chainsaw kicked back and cut through his boot, lacerating the top of his right big toe behind the toenail. He was hospitalized.",1
"An employee was drilling into an I-beam using a drill press. The press caught her hand and pulled it in, breaking her right arm.",1
An employee was closing out for the day and gathering silverware. They slipped and fell on the wet floor sustaining a fractured hip.,1
An employee was making an adjustment on the flower pack machine when the capper piston/plunger activated and amputated the employee's right pinky fingertip. The machine was not locked out at the time of the incident.,0
An employee was tightening a cable on a stacker hoist when the stacker hoist turned on pinching the employee between the forks of the hoist and a sprocket. The employee sustained internal bleeding.,1
"The locking pin on a dock fell and pinched an employee's little finger, causing the amputation of the fingertip.",0
An employee was cleaning the gutters of a home and fell approximately 15 feet from a ladder to the ground below. The employee sustained a broken leg.,1
Employees had just finished a curb and gutter alongside a road for an approach to a convenience store. The employees were working behind a concrete wall. A vehicle crossed into an oncoming traffic lane with a police motorcycle following. The vehicle hit the concrete wall and two employees were injured by the vehicle. One employee sustained a broken left leg. Another employee's right foot was bruised.,1
"An employee had been using power tools to remove paint on a naval ship. While exiting the ship, the employee was trying to open a weather access hatch when the scuttle hatch came down on his fingers. The index, middle, ring, and little fingers on both hands were crushed.",1
"An employee was using an edger to cut grass at a client's home. When he backed the edger away from the client's car, its blade amputated his right little toe and cut the next three toes.",1
An employee tripped over two boxes while walking out of a walk-in refrigerator. She suffered an ankle injury and a fracture in the abdominal region and was hospitalized.,1
"A piece of equipment was being moved with an unloader and chain. The leg of the equipment broke and struck the employee's right foot, lacerating it.",1
"On May 19, 2022, while two employees were clearing a jam on a rip saw, the roller came down and released the board. An employee's right middle finger was pinched between the board and the equipment, resulting in an amputation before the first knuckle.",0
"An employee was trimming a part using a table saw. The saw blade lacerated her little finger, causing an amputation to the fingertip.",0
An employee was drilling into a metal pole when the drill bit broke. The drill then slipped and hit the employee's right forearm resulting in a puncture wound.,1
"On May 19, 2022, a postdoctoral fellow was handling rats during an experiment. A rat bit her right index finger, and the wound became infected resulting in hospitalization.",1
An employee was opening a truck trailer door when a gust of wind hit it. The employee was thrown to the ground and suffered a broken hip.,1
"On May 19, 2022, at 3:30 PM, an employee was traveling from a worksite to an airport to fly home. The employee stopped to get gas and was the victim of an attempted car-jacking. The employee was shot in the jaw and also sustained injuries to the abdomen. The employee was hospitalized.",1
"While operating a pellet mill, an employee's left-hand fingers got caught between a roll and a forming die resulting in partial amputation of the fingers.",1
An employee was clearing a blockage of sugar when his finger contacted a moving screw conveyor. The employee's fingertip was amputated. The conveyor was not locked out at the time.,0
"At about 5:45 p.m. on May 19, 2022, an employee was developed heat stress while cutting rubber blocks with a pneumatic press and manually stacking them onto separate pallets. The employee was hospitalized.",1
"On May 19, 2022, an employee was performing routine maintenance on a piece of equipment that was energized. The machine's guard had been removed to perform this task. As he reached to lubricate a chain-driven sprocket, his left thumb got caught between the sprocket and the chain resulting in amputation of the thumb.",0
An employee was cutting laminate strips on a table saw. The blade kicked back and caused amputations to the employee's middle finger and thumb.,0
An employee was cutting a steel band from a bundle of steel bars. A bar pinched and amputated his right middle fingertip.,0
An employee suffered a cut hand while notching parts with a radial arm saw.,1
"An employee was helping repair an air compressor. The compressor kicked on; a drive belt detached from it and struck the employee, tearing the fingernail and some skin from their left little finger.",1
"On May 19, 2022, an employee was checking a noise coming from an air compressor. His right hand slipped and was caught in the compressor's fan, which partially amputated his right ring finger.",0
An employee was driving a utility golf cart when it struck a planter. She fell out of the cart and suffered a concussion with possible internal bleeding.,1
An employee was moving a welding machine when it tipped over and crushed the fingers on his right hand. Part of a finger was medically amputated.,0
An employee was inspecting a fire suppression hood when his left foot slipped into a vat of hot oil. He suffered burns to the leg from the bottom of the calf to the area behind the knee and was hospitalized.,1
An employee was moving a ladder when an elevated aluminum beam slid down the ladder and struck the employee's fingers. Two of them were broken.,1
An employee was investigating an issue with a riding mower. He turned it off and lifted its flap to check the blades. The mower turned back on and amputated his left middle and ring fingertips.,0
An employee was walking on the roof when he slipped on plastic underlayment material causing him to fall 12 feet off the roof. The employee sustained fractured back vertebrae.,1
An employee was cleaning fiber off a roller drive belt. The employee's left index fingertip got caught where the roller drive belt meets the belt wheel resulting in amputation of the fingertip.,1
"An employee was working in an area where melted steel was being transported in a ladle. The metal burned through the ladle and production halted. When the employee stepped into a patch of dirt, hot debris particles flew between his fire safety boot and his pants, causing third-degree burns on his left leg and foot. He was hospitalized.",1
"An employee was driving a walkie-rider truck. When it stopped, the employee was thrown off. The employee's head struck the concrete floor; the employee suffered a broken back and a cut to the back of the head.",1
An employee was reinstalling an agitator pump at the edge of a heated liquid salt tank (600 degrees F). The bottom of the pump rests on a mount and the pump is attached to it with bolts. The alignment tool slipped out of the bolt hole and the employee's left hand contacted the heated liquid salt resulting in burns to the knuckles on his hand.,1
An employee was placing components on pallets. The stop gate rose and his right little finger was caught between the gate and a steel stop bar resulting in a fingertip amputation.,0
Two employees were using a reciprocating saw to cut through metal decking when the floor/decking collapsed causing the employees to fall approximately 12 feet to the ground below. One employee landed on top of the second employee. The second employee suffered a fracture and contusions.,1
"On May 19, 2022, an employee was moving a portable rack full of plants. The rack's wheels hit a watering hose causing the rack to fall and strike the employee. The employee was hospitalized with injured vertebrae in their back.",1
An employee was using a loader to stockpile sand and the loader started to get hot. The employee pulled over and opened the radiator cap. Hot radiator fluid sprayed onto the employee resulting in thermal burns to the bicep and the right side of the chest and ribs.,1
"An employee was on a ladder painting a tall structure. The ladder buckled and the employee fell, hitting his head.",1
"An employee was assisting other workers with the removal of counterweights from a crane. The pin to the counterweights was manually knocked out. The counterweight then fell over and struck an employee who was standing on the body of the crane. The employee sustained fractures to their pelvis and right arm, as well as a laceration to their left leg.",1
An employee was rotating a motor on a cart. The employee's left little finger was crushed between the cart and an I-beam and was medically amputated.,1
An employee was installing a solar electric system. A metal brace held by the employee touched a power line. The employee suffered a shock and a burn to the hand.,1
An employee was tearing down a heat exchanger component on a vacuum furnace. He was using a bottle jack to lift one end of the heat exchanger when the exchanger tipped over and landed on him. The employee sustained fractures to his pelvis and right scapula.,1
"An employee was dismantling a framed wooden wall. The wall fell on the employee, who suffered a concussion and a facial laceration that required stitches.",1
"An employee was working on a truck that had broken down. A jack had been used to raise the trailer. The jack slipped, and the employee's hand was pinned between the trailer and a tire. The employee underwent surgery for injuries to the ring and little fingers.",1
"An employee tripped at a self-checkout stand, fell, and suffered a broken right hip.",1
"An employee had just placed reflective safety cones and highway flares to close a highway lane. He was walking back to his truck when a vehicle hydroplaned on wet pavement, lost control, and struck the employee and his truck. The employee suffered a broken leg and pelvis.",1
An employee was using a sander to sand down a weld on a part. The sander slipped off and struck his left forearm resulting in an abrasion that hit an artery.,1
"A security officer and an employee were going outside in the rain to allow a visitor entry to a secured tractor trailer lot. The employee went toward the key pad to enter the code that allows the active electric fence to open. The employee slipped on the wet ground and their umbrella made contact with the 7,000-volt electric fence. The employee sustained an electrical shock from his arm throughout his body.",1
"An employee was standing in a dog spa check-in area when a dog bit the employee's left hand, causing wounds that became infected. The employee was hospitalized for surgery.",1
"A bindery employee was raising slippery, UV-coated paper on a lift table to cut it. The paper began to slide off the table, and the employee fell backward onto the concrete floor while avoiding it. The employee suffered a broken hip.",1
An employee was accessing a battery from a diesel welding machine when their right hand was struck by the cooling fan. The employee sustained a cut to the right hand and nerve damage.,1
An employee was working as a yard driver at the back dock of a facility. The employee developed dehydration and kidney failure and was hospitalized for heat exhaustion.,1
An employee was installing drywall from a baker's scaffold and fell off the scaffold.,1
"An employee was unstrapping a load from his truck. The strap wrapped around his leg, causing him to fall from the trailer and suffer a broken right ankle.",1
"An employee was operating a powered industrial truck when it went out of control and pinned his ankle and foot, breaking them.",1
"An employee was ripping a piece of 2-by-6 lumber on a table saw. His left hand slipped off the material, and the saw blade cut his left index, middle, and ring fingers.",1
"An employee was in a parking lot, trying to separate a flat cart from a regular shopping cart, when he fell. He suffered a broken hip and was hospitalized.",1
"An employee was working on a brake press. She may have lost balance while on the chair and attempted to stop herself with her left hand, inadvertently stepping on the pedal that started the cycle. Her left arm was crushed between her wrist and elbow resulting in amputation at the elbow.",1
"An employee was spotting as a storage tank was offloaded from a truck to the ground. The winch cable caught on a post; the post then broke loose and was thrown into the air, striking the employee's head.",1
"An employee was polishing stone with a mill polisher machine when his right middle finger got caught in the polisher, amputating the distal phalange.",0
An employee slipped and fell while mopping the floor. The employee sustained torn ligaments in the knee requiring hospitalization.,1
"An employee was helping to reposition a newly set pole that was being held by a digger derrick. While the winch line and choker chain were under tension, the employee started to rotate the pole. A link of the chain pinched the employee's left ring finger against the pole. The finger was fractured and the fingertip amputated, but was able to be reattached.",0
"An employee was teaching in class when they were attacked by students. The employee was hospitalized, having sustained a head injury and a seizure.",1
"On May 21, 2022, at 4:08 PM, an employee had gone out back to walk around to the front and wipe down patio tables. She was returning to get bar towels and slipped and fell while going up the ramp. The employee sustained a broken hip.",1
An employee bumped his elbow and sustained a bacterial infection.,1
"An employee clocked out and was leaving the facility. She tripped on railroad tracks that go through the breakroom and fell, breaking her right femur.",1
"An employee was traveling across an elevated service/working platform. The employee fell through an open floor section, striking the lower level, the floor, and some foundry equipment and suffering multiple fractures to both legs.",1
"An employee was helping troubleshoot a bagger machine. When he reached to set the gear to clear an error code, the gears energized causing an amputation to his left middle finger.",0
An employee was cutting short ribs on a bandsaw and amputated his left middle fingertip.,1
"An employee was cutting plastic wrap with a utility knife. The knife cut through the employee's left thumb pad, amputating part of the thumb.",1
An employee was walking to the other side of the mold transfer shuttle and their head got crushed between the mold transfer shuttle and support I beam when the shuttle was moving away from the machine. The employee suffered a fractured skull.,1
"An employee was unloading general cargo from a ship. The employee's right middle and ring fingers were pinched in a cargo hook safety latch, causing amputation and degloving injuries.",0
"An employee fell from the top of a 3-foot step stool, landing on a wooden bench and suffering broken ribs and a punctured lung.",1
"On May 23, 2022, a courier employee was walking down a staircase when he missed a step and fell onto a metal ramp. The employee was hospitalized with a dislocated hip and shoulder and a hyperextended finger.",1
"At 1:00 p.m., on May 23, 2022, an employee was pulling the strap to close a roll-up trailer door when the door came down on his left ring fingertip. The fingertip was amputated.",0
An employee was climbing down a ladder from a roof. The employee fell from the ladder to the ground and suffered a broken hip.,1
"An employee was moving a car with a forklift. When the employee set the car down on its side, it shifted and fell on his right leg. He suffered a broken right femur and was hospitalized.",1
"An employee fell in a break room, suffering a broken leg. She was hospitalized.",1
"An employee was leading a horse when it kicked her, breaking her ribs.",1
A stunt performer was being pulled from one point to another with a wire system. She landed on the ground and suffered a broken collarbone. She was hospitalized.,1
"An employee fell from a second-floor catwalk to a tile floor, 10-12 feet below, suffering broken vertebrae and a sprained right wrist.",1
"A nylon strap parted, causing VFD power cables to fall onto an employee.",1
An employee was cutting a piece of wood on a table saw. The saw blade amputated his left thumb.,1
"An employee was adjusting a belt for a rice milling machine. The pulley and belt snagged the employee's work glove, pulling the employee's right middle finger into a pinch point. The fingertip was amputated.",0
"An employee was hammering to remove a mirror from a column enclosure. The top part of the mirror fell, shattered, and lacerated his left upper arm.",1
"An employee was rigging a steel bar with double leg sling chains. The hoist was raised while he was holding one chain leg by hand, and the chain leg on the floor caught under the roller table the bar was resting on. The chain pushed the bar off the rollers, and it broke the employee's ankle.",1
"An employee was running after a soccer ball to kick it back into play for children she was watching. She stepped on or tripped over the ball, suffering an ankle injury that required surgery.",1
"An employee was using a torch to braze the copper tubing of an HVAC unit. The torch handle erupted in flames, which burned the heel of the employee's left hand.",1
"An employee was unjamming a mechanical power press. He pushed on the die and it hit a trigger, activating the press. The employee's left index fingertip was amputated when the ram came down.",0
"On May 23, 2022, at approximately 8:30 AM, a machine in the press room began to malfunction. An employee went to check the computer side of the machine and was exposed to steam and boiling water on their right side and feet. The employee sustained second degree burns and was hospitalized.",1
An employee changing a 277-volt lighting ballast was shocked by electricity and sustained a laceration to a finger during their recoiling from the shock.,1
"An employee was trying to straighten a piece of metal by hooking it on a dumpster. The employee fell, suffering a broken hip.",1
"A bottle became stuck on the empty bottle conveyor line. Two employees approached the bottle from opposite directions and arrived at the bottle at the same time. The section of platform the employees were standing on failed and the employees fell 9 feet to the floor below. One employee was treated and released. The second employee was hospitalized for a C7 fracture, a T1 transverse fracture, a T12 chance fracture, and a L1 superior end plate compression fracture. Her injuries required surgery.",1
An employee was mowing the fairways on a golf course using a triplex mower and noticed the reels of the mower were not cutting the grass properly. The employee got off the mower and saw that the reels were covered in grass. The employee tried to clear the grass using their gloved right hand and the glove got caught on the reel blades. The employee sustained lacerations to their right index and middle fingers later resulting in amputation of the index finger and the partial paralyzation of the right middle finger.,0
A press brake activated and crushed an employee's right hand. The employee was hospitalized.,1
"An employee was guiding a rotor that was lifted by a crane. As the rotor was lowered into a motor, the tip of the employee's right thumb was crushed between the rotor and the motor, resulting in partial amputation of the bone.",0
An employee was using a blowtorch to cut a large metal container when a piece of metal fell from the container and struck him. The employee was hospitalized with a concussion and a fractured femur.,1
An employee fell from an order picker to the ground about 10 feet below. The employee suffered a leg injury.,1
An employee was changing a blade on a pneumatic shearing machine when the machine cycled and amputated their fingertips.,0
"An employee was on a work platform about 5 inches above floor level, packing finished product at the end of a production line. When she stepped back off the work platform, she fell backward and suffered a head contusion.",1
An employee was trimming trees from an aerial lift. The employee fell 6 to 7 feet from the equipment to the pavement below and suffered two broken heels.,1
"An employee was standing beside a pole trailer. The employee's left thumb was caught between a pole and the trailer, and the thumb tip was amputated.",0
"An employee was offloading large rolls of paper from a trailer. A roll twisted as the employee was balancing it; it struck the employee, who suffered broken ribs and a collapsed lung. The employee was hospitalized.",1
"An employee was jumping down from the back of a trailer. The trailer caught the employee's ring, causing the amputation of the ring finger.",0
An employee was cutting wood using a pop-up knot saw. The saw amputated the employee's right thumb tip.,0
"An employee was cleaning the applicator rolls on the outfeed side of the glue spreader using a rag. The rag got caught in the rollers, pulling his left arm into the machine. The employee suffered compartment syndrome of the left arm and was hospitalized.",1
An employee was placing a piece of plate steel into a hydraulic shear to cut it. The shear cycled and caught the employee's index and middle fingers between the plate steel and the work surface of the shear. The employee suffered amputations to both fingertips.,0
"An employee fell 4 feet from a concrete form while using a concrete vibrator. His leg was broken between the ankle and the knee, and he was hospitalized.",1
"A chemist was finishing a reaction. He added paraformaldehyde to a Grignard solution in a 5-liter glass jacketed reactor. The reaction mixture over-pressurized and the reactor shattered, spreading shards of glass throughout the room. The chemist sustained lacerations to the chest and thigh.",1
"An employee was cutting wood using an electric hand saw. The saw cut his left index fingertip, necessitating a medical amputation.",0
"An employee was cleaning a second-floor area when he fell through a plywood-covered access hole. He landed on the ground and suffered a broken wrist, as well as a forehead injury that required staples.",1
"An employee was installing a jumper on an electrical line. A 7,200-volt arc flash burned the employee.",1
An employee tried to turn off the alarm on the machine when their hand and wrist were burned by molten and pressurized nylon that was coming out of a nozzle.,1
"An employee was backing a stand-up forklift into a freezer. Her foot was caught between the forklift and the freezer wall, and she suffered a broken left ankle.",1
An employee's right index finger was caught in the chain and sprocket of a hamburger bun conveyor. The finger was amputated.,1
"On May 24, 2022, an employee was pushed down stairs by another employee during an altercation. The employee suffered a broken wrist and was hospitalized.",1
"Two employees were about to use clamp trucks to move damaged rolls of paper. One employee got off his truck and walked toward the second truck. A roll of paper became unstable, fell and crushed the employee's left leg.",1
"An employee was operating a resaw. The employee's hand was caught between the machine's rollers, and the employee suffered three broken fingers.",1
An employee's right thumb was caught in a door that a patient had hit. The employee suffered a shredded right thumb bone.,1
"An employee tripped on an uneven hallway floor. The employee fell, suffering a broken right shoulder, a broken left kneecap, and a cut on the mouth. The employee was hospitalized.",1
"An oven was being rolled out of a box truck onto its lift gate. The oven rolled off the truck and landed on the ground, then fell on an employee's leg. The employee suffered a broken left ankle and was hospitalized.",1
An employee was relighting the pilot light within the fire tube of the treater. Flame blew out of the exhaust barrel and caused second degree burns to the employee's face.,1
"An employee was sanding a metal mesh part on a disk sander. The piece of metal was pulled into the gap between the table and the sanding disk, and the employee's left thumb contacted the sand paper. The top of the thumb (about 5/8 of an inch) was amputated.",0
An employee was stepping onto a ladder to climb down when it shifted. He fell and suffered a back injury.,1
An employee was helping unload a pre-cast concrete vault. He was signaling for the forklift operator and  got caught in between the load being lifted and a parked forklift. The concrete barrier struck the employee in the torso and bruised his ribs.,1
"Two employees were working on a machine. As one of them loaded metal tubing into the machine, the tubing kicked back and struck him, lacerating his left hand.",1
"An employee climbed up onto stacked storage containers to check for parts. During his descent, he jumped from a height of approximately 5 feet. Upon landing, his right knee buckled and he fell to the ground, resulting in a right hip fracture that required surgery.",1
A truck driver was walking on the catwalk of a truck when he slipped and fell to the ground. He sustained a torn right triceps and a lower left leg laceration that required stitches.,1
"An employee was helping another employee with a plastic roll on a line. A roll bar and its metal plate crushed the employee's left index finger, resulting in amputation of the finger.",0
"An employee was pulling a hose out of a cement tanker. The hose twisted and the employee tripped over it, falling to the ground and suffering a broken left kneecap.",1
An employee was preparing to move a 24-volt battery operated fertilizer diverter conveyor system and valve. He removed an electrical cord used to charge the internal battery charger for the two 12-volt batteries when an internal spark caused an explosion within the battery box. The employee sustained a broken left hand and lacerations to the forehead.,1
"Employees had been moving supplies in a warehouse. They used a forklift to lift a pallet jack approximately 5 feet high. The pallet jack slipped off the forks and fell on top of an employee's leg, fracturing it.",1
"An employee had been using a forklift to put drums full of honey into an oven. One drum fell over when he put it into the oven, so he hopped into the oven to try and get it back into place. In the process, the agitator shaft caught his clothing and began to spin him around. His legs touched the top heat coils and sustained third-degree burns.",1
"An employee was installing a duct through a scaffold hatch. The hatch fell closed, landing on his left little finger and amputating the tip.",1
An employee was delivering mail and fell while walking down a resident's stairs resulting in a broken right leg.,1
"On May 25, 2022, an employee was assisting with the installation of sheetrock. While pushing down on sheetrock, the employee lost their balance and fell from a ladder. The employee grabbed the metal studs during the fall, resulting in lacerations to their right middle and ring fingers. The employee was hospitalized and required surgery.",1
"An employee was removing a support plate from a camber machine. As the employee lifted the plate with an overhead crane, the weight shifted and the plate crushed his left index finger, causing an amputating the finger.",0
"On May 25, 2022, at 2:00 AM, an employee was using a rag to clean rollers. The employee dropped the rag and when he tried to retrieve it the rollers caught the rag. The employee's right hand was then pulled into the rollers resulting in amputation of the index finger.",0
An employee was pulling wet grain out of a grain vac and came in contact with the air lock (fan blade) resulting in the amputation of two fingertips.,0
A trash pick-up helper was riding as a passenger enroute to a landfill when he became ill. The employee was hospitalized with heat exhaustion.,1
An employee was using a ladder to stock a warehouse rack and fell less than 6 feet to the ground resulting in fractured ribs and a fractured wrist.,1
"An employee was closing the side drop door of a railcar after loading it. The employee placed the lock on the door, but the lock would not go into place. He used a square tube to tug on the lock. While tugging, he fell forward and hit his face on the lock and sustained a broken left eye socket.",1
An employee was struck by a forklift on a production floor. The employee suffered a broken leg and was hospitalized.,1
"After bending over to pick up a computer mouse, an employee straightened up and felt severe back pain. He was hospitalized.",1
"An employee was working 13-15 feet in the air from a stationary scissor lift, to repair an overhead hoist. The scissor lift tipped over and the employee fell. The employee was hospitalized with fractures to the ribs and shoulder.",1
An employee was forming metal parts using a press. She was removing a part with her hand when the press was activated and the tooling caught and amputated her right middle finger.,1
An employee was attempting to connect a drive train when it caught and amputated his fingertip.,1
An employee was overseeing contractors conduct fire pump testing and caught their left foot on a propped open door.,1
"An employee was painting in an elevated aerial lift on the side of a roadway inside a barricaded containment. A truck traveling through the construction zone swerved into the containment, hitting part of the aerial lift. This caused the employee to be thrown against the lift's guardrails. The employee was hospitalized with fractures to the right-side ribs and contusions to his hip and back.",1
"On May 25, 2022, at approximately 9:00 a.m. employee 1, a boom truck helper, was working with a boom truck operator. They were unloading a pallet of shingles onto the roof of a single-story, new construction home. The employees were utilizing a crane mounted to a flatbed truck. Employee 1 was near the ridge cap of the roof unloading the pallet of shingles when their foot slipped and the employee slid down the roof on their back and landed on their feet, approximately 10 feet below. The employee suffered a fractured T12 vertebra, a fractured left heel, and a spinal cord injury from waist down. Neither employee was utilizing fall protection at the time.",1
An employee was operating a hand powered hydraulic jack to re-assemble an internal part of a piece of equipment. The employee was struck in the head by the jack and sustained facial fractures around the eye area and lacerations.,1
An employee was walking with a glass bottle when the bottle fell and shattered. Pieces of glass lacerated his eye.,1
An employee was struck and partially run over by a skid steer. The employee sustained a broken pelvis and a ruptured bladder.,1
"On May 25, 2022, at 10:30 a.m., an employee was performing housekeeping activities on top of a silo when they began experiencing a heat-related illness and were hospitalized due to dehydration.",1
"An employee was in a muddy trench while cutting off a piece of existing sewer line when they slipped and fell on the blade of the cutoff saw, resulting in a deep laceration on their left forearm.",1
An employee was swapping barrels under a dust cyclone. The employee turned around and ran into an adjacent barrel and lost balance. His right hand went up the sock that surrounded the bottom of the dust collector and the rotating airlock blade partially amputated his index and middle fingers. The machine was not guarded at the time.,0
An employee was operating a peeling machine when the blade partially amputated their left thumb.,0
An employee was standing by as a skid steer was pushing a tree branch off a road. The employee's leg was run over by the skid steer resulting in a broken ankle and foot.,1
"A reach truck operator was struck by a glass bottle that fell from a pallet, suffering a severe laceration to the right forearm.",1
"An employee was sitting on top of a storage container when the container caved in. The employee fell into the container and was exposed to pan cleaner, resulting in chemical burns to the face, lower back, and legs.",1
"An employee was walking from the parking lot into the building when they slipped and fell on the walkway, resulting in a back injury that required surgery.",1
"An employee was working from an aerial lift over 10 feet in the air, cleaning chains connected to tracks that moved cattle down a line. His hand was caught and broken between a track and a chain.",1
A mechanic (injured employee) was repairing a tractor on an assembly line and was positioned to the rear left side of the tractor. An assembly technician was performing a rockshaft check while positioned to the right front side of the same tractor. When the assembly technician actuated the rockshaft located at the rear of the tractor the mechanic's head was caught between the rockshaft and the Rollover Protection System (ROPS) bar of the tractor. The injured employee suffered a complex laceration of the right ear and a temporal bone fracture. The employee was hospitalized.,1
"An employee was hooking up a utility trailer to a passenger van when their left hand was pinched between the trailer hitch and trailer ball on the van, resulting in a hand fracture at the left little finger.",1
An employee was setting up a rock wall climbing event. The employee fell approximately 8 to 12 feet from a ladder to the ground sustaining broken bones and bleeding in the brain.,1
An employee was pulling and spraying weeds in the median of a road. A car ran off the road and struck the employee breaking his left leg.,1
An employee was testifying in a court hearing. A patient became agitated and punched and kicked the employee multiple times. The employee sustained head trauma and was hospitalized.,1
"On May 26, 2022, an employee was operating the pipe machine when a piece of metal got caught in the machine. The employee's glove got caught in the machine crushing his right index, middle, and little fingers and amputating the fingertips.",0
An employee was unloading a bulk 800-pound tank when their finger was caught between the tank and a pallet jack. The employee sustained an amputation to their left ring finger.,0
An employee was terminating a de-energized cable. The cable crossed into an energized cabinet section and an arc flash burned the employee.,1
"An employee was operating a pallet sorting machine. While pulling a piece of plastic from a pallet on a conveyor, the plastic wrapped around his glove and pulled his right arm between two rollers. He sustained fractures to the arm.",1
"An employee's left-hand fingers were pulled into the chain and sprocket on a horizontal conveyor. All four fingers were lacerated, and the index and little fingers required partial medical amputations.",0
"An employee was setting up a wire drawing machine. When he started the machine, it turned on at full speed. The 1/8-inch steel wire in the machine snapped and impaled the employee on the left side of the chest. The employee was hospitalized.",1
"In a precast concrete production building, an employee was handling a fiberglass mold used to cast a concrete double waste container. The mold was cured and ready to be popped/separated. As part of this process, the employee covered the holes inside the mold to prevent air from escaping. Air was then pushed into the mold to release it from the product. When the mold let go from the casted product, it amputated both of the employee's index fingertips.",1
"An employee was operating a forklift. The employee's thumb was caught between the forklift and a storage rack, and was lacerated and fractured.",1
"Two people were fighting. When an employee approached, one of them shot him in the lung area. He was hospitalized.",1
An employee was replacing belts on a parts washer. The washer pulley caused amputations to the employee's right ring and little fingers.,0
"An employee was using a double pallet jack to select product and palletize goods. She had selected a batch and was proceeding to drop off two pallets at the staging area. While reversing to line up the pallets she was pinned between the pallet jack and storage racking. Additionally, freight was knocked loose and fell from the rack. The employee had difficulty breathing and sustained swelling to both arms, a bruise on the left arm, and tension in the neck.",1
"An employee tripped while stepping out of his vehicle, fell to the sidewalk, and suffered lacerations to his face and nose.",1
"An employee was working at a hydraulic press. As he moved blanks in or out of the press, his left index finger was caught and crushed in its point of operation. The finger was medically amputated.",0
"An employee was cutting thread bolts with a cutting wheel while standing over a cellar. The employee fell 4-5 feet into the cellar and landed on equipment in the cellar, resulting in a laceration on their right bicep.",1
"An employee was checking internet connections in a box on a second floor. The employee fell off plywood flooring into a drop ceiling area, landing on a bathroom floor about 10 feet below. The employee suffered a broken wrist and a broken elbow and was hospitalized.",1
An employee fell to the floor while walking down a flight of stairs in the third-story stairwell. The employee was hospitalized with broken ribs.,1
"A person came into the store and asked for a bag of chips. An employee was ringing up the bag of chips when the person shot them in the abdomen, resulting in hospitalization.",1
"An employee used a wire brush to clean the threads of two 10-foot joints of 2-inch figure 1502 iron pipe, which were sitting on the rack of a monorail trailer. As the employee rotated the pipe inward to clean the threads of the innermost joint, the opposite end of the pipe dislodged from the rack and fell to the ground. As it fell, the end nearest to the employee levered upward and pinched their right thumb between the two joints of pipe. The employee sustained a laceration and fracture to the thumb.",1
"An employee was standing on a T-block stacking dunnage. The employee fell backward, landed on a piece of dunnage, and suffered broken ribs.",1
"An employee tripped and fell over a garden hose, landing on the ground and suffering a broken hip.",1
An employee was checking a milled surface for cross slope and depth when a truck came into the work zone and struck his arm resulting in a lacerated triceps.,1
"An employee was being lifted in an attachment to reach a damaged sight gauge line when they fell approximately 6 feet to the ground, resulting in an injured left wrist, collar bone, and hip.",1
"An employee was descending an extension ladder that was set up on a cable strand at approximately 18 feet. When the employee was about halfway down, the ladder started to shift to the left and the employee jumped off the ladder to the right. The employee landed on a concrete sidewalk and their right ankle was fractured.",1
"An employee was unpacking merchandise from a large cardboard box. He slipped on the flap of the box and fell to the floor, hitting his head and suffering a head laceration. He was hospitalized.",1
"An employee was using a high-pressure washer to remove ceramic material from a casting. The casting was dropped, causing the employee's left index finger to be grazed by the water stream. The water pierced his glove and entered his finger.",1
"An employee was powering down a second break roller mill, which is used to grind wheat into flour. The employee's fingers became caught in a pinch point, resulting in amputation of the middle fingertip to the third knuckle and fractures to the index and ring fingertips.",0
An employee was lifting a hydraulic cylinder into place. The pry bar being used slipped and caused the cylinder to pinch his left little finger resulting in a partial amputation. The employee required hospitalization and surgery.,1
An employee was unloading goods from a semi-truck using a lift gate. He was rearranging a pallet of goods so the customer could use a forklift to unload it when he stepped backward off the gate. He fell approximately 3 feet onto concrete. He struck his head on the concrete and sustained a fracture to the back of the skull.,1
"An employee was helping a crane pick up a bundle of plywood. He noticed that one of the lifting straps was twisted as the lift was taking place and tried to kick it straight. His leg got caught in the strap as the bundle was lifted, and his leg was broken. He was hospitalized for surgery.",1
An employee was operating a side-by-side while marking a proposed pipeline route. The vehicle struck a downed log. A limb from the log penetrated through the fender and impaled the employee's right thigh and abdomen.,1
"An employee was on an 8-foot A-frame ladder, two rungs below the top. He reached up and to the left causing the center of balance on the ladder to shift. He and the ladder both fell to the ground. The employee sustained fractures to the arm, wrist, pelvis, and hip.",1
"An employee was moving drums off a skid. When he set a drum back down, his ring finger was caught between the rims of two drums resulting in amputation of the fingertip.",0
"An employee was cleaning a saw. As he was getting a piece of material stuck on the saw blade, the saw activated and broke his left index finger. The fingertip was also amputated.",0
"An employee was walking through a parking lot. A vehicle struck her, causing multiple fractures including a broken femur, and lacerations.",1
"An employee was walking toward the exit door, tripped over the tines of a stationary forklift, and fell into the mast of another forklift resulting in lacerations to her face and left knee and a dislocated right shoulder.",1
"An employee was cleaning sawdust under a conveyor belt. The belt caught the employee's right ring finger, lacerating and fracturing it.",1
"An employee was attempting to clear a jam in a bottle trimming machine when their right index finger was cut by the bottle trimmer, resulting in a fingertip amputation.",0
"On May 27, 2022, at 2:30 p.m., an employee was descending a ladder while holding a nail gun when the nail gun discharged and a 2-inch nail entered the employee's upper-right abdomen, resulting in hospitalization.",1
"An employee was riding his electric bicycle in the workplace when he lost control and fell off, fracturing his left knee.",1
"An employee was climbing up a ladder to connect a cable wire when his boot slipped; he fell approximately 8 feet to the ground, resulting in three fractured ribs and back pain.",1
A temporary employee was operating a dock plate at a loading dock. His toe became caught in the plate and was partially degloved. He was hospitalized.,1
"A temporary employee was moving a yogurt hopper machine. The machine engaged while his left hand was in an opening, and a piston amputated his left index fingertip.",0
"An employee was putting an empty pallet on the forks of an electric pallet jack. While maneuvering the pallet jack forks underneath the pallet, the employee's right lower leg was caught between the pallet jack and a stack of empty pallets. The employee sustained a fractured right tibia.",1
An employee was spotting for a forklift carrying a load of drywall. The drywall shifted and slid off the forks of the forklift and struck the employee fracturing their left femur.,1
A mechanic was troubleshooting a metal detector reject valve when the ball valve activated and amputated the middle and ring fingertips on their right hand.,1
"An employee was using a circular saw to cut out a piece of backing of a cabinet. The saw blade got caught on a knot in the wood, which kicked back. This caused the saw to cut back and twist, and the blade amputated the employee's fingertip.",0
"An employee put a roll of lamination film on a lamination machine to laminate (glue) two pieces of film together. When he pushed the button to disengage a roll from the machine, the empty roll moved over and his right middle finger was caught between the metal rod and the core of the laminate roll. The fingertip was amputated.",1
"An employee was walking and fell to the ground, suffering a broken femur. She was hospitalized.",1
"An employee was attempting to remove a dock pin while removing dock plates. Once the dock plate was loosened, it fell on the employee's right hand, resulting in a middle fingertip amputation.",0
An employee was repairing the hydraulic pump of a scissor lift. The lift jumped and the blocking device fell off the lift. The lift then fell and fractured the employee's right arm.,1
An employee was operating a pallet jack while picking food from shelves. The employee became pinned between the pallet jack and racking. The employee's right tibia and fibula were broken.,1
"On May 27, 2022, an employee was installing a pump and a motor onto a wash tank after it had been removed for repair using an overhead crane, an eyebolt and a lifting strap. While the employee was maneuvering the pump into its final placement, the employee placed their hand underneath the load to align a gasket prior to setting the pump and motor in place. While adjusting the gasket, the eye bolt broke causing the pump and motor to fall onto the employee's right hand fingers, resulting in a fracture and partial fingertip amputation to the right middle finger.",0
"An employee was using two rod wrenches to tighten a stand of rods as they were placed back down a hole. While wrenching the rods, the employee went to tighten the rod boxes. The employee lost grip on the wrenches and their left little finger was caught between the wrench handles resulting in amputation of the fingertip.",0
An employee was removing a nut on the main bearing in preparation to change out the main bearings on an engine. An engine main cap fell on his right thumb causing a crush injury that required medical amputation of the thumb to just behind the thumbnail.,1
"An employee was down on his right knee on the sidewalk, wiring a lighting junction box when a forklift struck him and fractured his leg.",1
"An employee was attempting to remove slack from a 5/8-inch steel lift cable that was attached to a pipe lying on the ground. As the employee approached to reposition the cable and get rid of slack in the line, the piping rolled slightly, creating tension in the line and pinching the employee's left middle and ring fingers between the cable and the pipe. The employee suffered two fingertip amputations.",0
"While using a bandsaw to cut pork ribs, an employee's right index fingertip was amputated by the blade.",1
"While an employee was lining up materials on an automatic double chop saw, the machine malfunctioned and the blade came down on his left hand. The index, middle, and ring fingers were amputated.",1
An employee was wiping down the rollers on a coating machine when two fingers on their right hand were pulled into the rollers and crushed. The middle finger was broken and the index finger was crushed and required stitches.,1
"An employee was cutting meat with a bandsaw. The sawblade caught on one of the rib bones, and his finger was brought into contact with the blade. He suffered a partial amputation to the finger.",0
An employee was cleaning the blender in the ground beef department and amputated two fingertips.,0
"On May 27, 2022, at 12:36 PM, an employee working from a 2-step ladder was making adjustments to a weather station. She fell to the ground and sustained a broken lower left leg.",1
"An employee was trimming hedges when the hedgers kicked back and contacted the employee's left hand, resulting in an amputation of the distal portion of the ring finger and a laceration on the distal portion of the index finger.",0
"An employee was standing on the top of a staircase. They turned to walk down the staircase and fell approximately 14 steps, resulting in injury to the face that required hospitalization.",1
"On May 28, 2022, at 4:24 PM, a postal employee was delivering mail to residences. The employee was facing their mail vehicle when a customer came up from behind and assaulted him with a baseball bat. He sustained a broken arm, a bruised kidney, and injuries that required twenty-three staples to the head.",1
"An employee was walking down the sidewalk when they were struck by a vehicle that was pulling into a parking spot, resulting in a left leg injury that required surgery.",1
"An employee was about to put mail in a mail box when a dog broke through a fence and came up the stairs at him. He jumped over a concrete wall to get away from the dog, twisted his ankle, and suffered a compound fracture to his right leg. He was hospitalized.",1
"An employee was cleaning sludge from a tank when they received chemical burns on 30 percent of their body from exposure to ethylene dichloride (EDC), as well as suffering kidney failure and vomiting.",1
"An employee fell from the top of a small table to the floor, suffering a broken left femur.",1
"An employee was on top of a cement silo investigating why an air slide gate would not close when the door closed on his left forearm about 3 inches above the wrist, resulting in an arm laceration.",1
"An employee was vacuuming a rug when she tripped on the rug and fell onto the vacuum cleaner, resulting in fractures to her ribs and sternum.",1
An employee was leaving the work area headed to break and was shot multiple times by a coworker.,1
"An employee was performing firefighting duties on the ground when a helicopter above the employee dropped water onto the ground as a fire retardant. The employee was struck by the water, resulting in a broken jaw and facial lacerations. The employee also sustained lacerations to the right thumb and wrist that required stitches and left knee fractures as well as general bruising to the entire body.",1
"An employee was standing on a ladder while painting the bottom of girders when they fell off the ladder approximately 5 feet to the floor, resulting in a hip fracture.",1
"An employee was working at a cash register when they tripped over a wire and fell to the ground, resulting in a broken left hip.",1
"An employee lost his balance while turning away from a check-out stand, fell to the floor, and suffered a broken hip.",1
"An employee tripped and fell on a curb, landing on her left knee and suffering a broken kneecap.",1
An employee was slurry-blasting a louvered ventilation door. The blasting material hit the employee's knee.,1
"Two employees fought, and one suffered injuries to his eye, forehead, and jaw as well as the loss of some teeth.",1
An employee was cutting meat with a band saw and amputated their left middle and ring fingertips. The saw was not guarded at the time.,0
"An employee was packing onions. The employee tripped on a strap hanging from an onion bag, fell to the floor, and suffered a broken hip.",1
A lift driver was storing and replenishing storage racks when his lift went out of control and his left ankle was caught between the lift and a rack. The ankle was lacerated and his heel was broken.,1
"An employee was patrolling a campground when they were bitten on the lip by a dog, resulting in a laceration.",1
"An employee was using a razor to remove decals from a window when the razor slipped from the surface of the window, resulting in a laceration to the employee's left eye.",1
"An employee was walking backward to wheel a patient in a wheelchair out of their apartment. The employee tripped and fell onto the concrete floor, resulting in a fractured left hip.",1
"A trash collector was standing behind a garbage truck. A car ran into the back of the truck, pinned the employee, and amputated his left leg.",1
"An employee was doing maintenance work on the power-end crankshaft of a fluid pump. His little finger was caught between the crankshaft and the main bearing, causing a laceration to the upper finger area and a partial amputation.",0
An employee was cleaning neck skinner equipment when two fingers were amputated.,1
An employee was stung or bitten by an insect while installing insulation.,1
The gate of an asphalt paving machine opened while an employee was sitting on it. The employee's left hip and leg were crushed.,1
"An employee was stacking tree limbs to be picked up by a truck. The employee began to feel sick and experience cramps, resulting in hospitalization for heat exhaustion.",1
"An employee was trimming weeds with a line trimmer when the trimmer got hung up at the bottom of a flagpole, causing him to fall and drop the trimmer. The employee fell forward and landed with his chest hitting the engine of the line trimmer that had fallen to the ground, resulting in internal bleeding.",1
"An employee was assisting the operator of a bag machine. The employee attempted to unjam material stuck in the machine when the machine started and the cut-off knife contacted the employee's left middle finger, resulting in a fingertip amputation with bone loss.",0
"A forklift operator was staging material when the forklift turned over and the employee fell out of the forklift and off the trailer, resulting in two broken ribs and an abrasion on the left elbow.",1
Two employees who were walking in opposite directions ran into each other. One employee fell to the floor and suffered a broken hip.,1
An employee was climbing down an 8-foot ladder. The employee fell to the ground and suffered a broken leg.,1
An employee had just cut through a pipe with a chop saw when the saw lacerated the back of the employee's left leg. The employee was hospitalized.,1
"An employee was delivering pizza to an apartment complex, missed the last 2 steps on a staircase, and fell to the concrete floor. The employee suffered a fractured right ankle and tibia.",1
"An employee was using a closed-cab feller-buncher to cut trees over a pond dam. The vehicle tipped and fell into the water, trapping him. He suffered shoulder contusions while being pulled from the vehicle and was hospitalized.",1
"On May 31, 2022, at 8:00 a.m., an employee was removing a block of wood from an electronic glue machine when the wood pinched her right thumb between a metal railing on the side of the machine, resulting in medical amputation.",0
"An employee was walking up the exterior concrete stairs of a business. Her toe caught on one of the stairs and she fell, breaking both wrists as she tried to catch herself.",1
"On May 31, 2022, at 10:15 a.m., an employee finished repairing a packaging machine. When the machine started, the employee went to remove folded film on the sealer jaws and the jaws closed on his left hand resulting in amputation of the index, middle and ring fingertips.",0
An employee was operating a machine used to bend rebar. The employee was holding a piece of rebar when their fingers were caught between the rebar and the machine's backstop guide resulting in a fingertip amputation.,1
"An employee was returning a powered industrial truck to its charging station before going to break when the truck stopped abruptly and the employee's left foot became stuck between the lift and a support pole, resulting in a foot fracture and crushed big toe.",1
"An employee was using a dill press to drill holes in a metal tube when the drill bit got caught in the tube, causing it to swing around and strike the employee on his right side. The employee then fell and the left side of his body struck a metal cart, resulting in five broken ribs on his left side and internal bleeding.",1
"An employee was troubleshooting the hopper of an extrusion machine after one of the bladders stopped working. The machine started up as the employee's left index finger was on a gear, resulting in amputation.",0
An employee sustained a partial amputation to their left thumb while chopping vegetables with a kitchen knife.,0
"An employee was picking up a vehicle at a customer's address. While getting out of the vehicle on the hauler truck, he fell backward onto the street, injuring his shoulders, neck, and head. The employee was hospitalized for a potential seizure, potential concussion, torn bicep, and bruising.",1
An employee was lifting a roll of roofing membrane into the back of a flatbed truck. The roll slipped off the employee's shoulder and smashed the employee's finger. The employee's left little finger was amputated.,1
"An employee was working at a plasma burn table, lifting a piece of metal with a magnet. The magnet disengaged and the load fell onto the employee's right hand, crushing the index and middle fingers. The index finger and the tip of the middle finger were amputated.",1
"A security/surveillance/greeter employee was trying to recover a shopping cart taken by an alleged shoplifter. The person attacked the employee, punching him, and there was an altercation. The employee was stabbed in the abdomen, suffering liver damage, and was hospitalized.",1
"An employee had been driving a material truck. He was stepping down from the truck, with his left foot on the ground and using three points of contact. His right knee buckled when placing the right foot on the ground. The employee sustained a tear to a tendon in the right knee.",1
"An employee was clearing excavations by placing wooden boards over holes when he fell into the 2-foot hole, landing on his right knee on the edge of the concrete slab on the opposite side of the hole. The employee suffered a fractured right patella and a laceration on his right knee.",1
An employee was running parts through a press brake. His left index fingertip was caught between a part and the machine's upper die. The fingertip was amputated.,1
An employee reached to grab their water bottle and fell about 2 feet from an elevated platform to the floor resulting in a fractured right arm.,1
"An employee was feeding wood into a ripsaw. The saw kicked back and a small board struck the employee's abdomen, causing internal injuries.",1
An employee was drilling a plywood sheet. The drill bit caught his glove and amputated the last joint of his left middle finger.,1
"An employee was walking around a piece of equipment. He stepped onto the stainless steel cover for a hot water drain, which shifted and dislodged. His left foot and leg entered the hole and were immersed in 12 inches of hot water. He suffered second-degree burns to the foot and lower leg.",1
"An employee was expanding tubes on a tube rolling machine. They moved to the next tube when the cover slid away from the gears and the rolling tube gears grabbed the employee's right forearm, avulsing the forearm.",1
"An employee was driving a triple electric pallet jack, traveling northbound in the main drive aisle. A smaller electric pallet jack was traveling southbound on the opposite side of the drive aisle, which is separated by a pedestrian walking aisle. The employee turned toward the inbound side of the building prior to crossing the pedestrian walkway and entering the opposing drive aisle. The two pallet jacks collided. The employee was ejected from their pallet jack, fell to the floor, and her left leg was run over by the smaller pallet jack. The employee sustained crush injuries to the lower leg and foot that required amputation of the lower leg.",1
"While cleaning a roll form machine, an employee's right thumb got caught in the rollers. The thumb was lacerated and required surgery.",1
"On June 1, 2022, an employee was hospitalized for heat-related illness.",1
An employee was using a band saw to cut pork chops when their left hand was lacerated by the saw blade.,1
"An employee was taking a pan of sausage patties to the serving line and tripped on the corner of a mat, falling onto her right side and sustaining a fractured hip.",1
An employee was moving a cant when it fell and crushed their left ring finger resulting in a medical amputation.,0
An employee was loading cargo into the back of a pickup truck with a trailer attached. The employee was carrying and holding a bag when he used his left hand to lower the tailgate. The employee's left middle finger became pinched between the top edge of the tailgate and the frame of the trailer resulting in amputation of the fingertip.,0
An employee was trying to free a stuck pallet from a rack. The employee fell onto a pallet and suffered fractures to the shin and face.,1
An employee was inspecting a screw auger. The employee's left middle finger was crushed and lacerated in the auger.,1
"An employee stopped a machine to exchange a full reel for an empty reel in the take-up. The employee rolled the empty reel into the take-up and placed the tail of the wire into the flange hole of the reel. The employee then began removing slack from the wire. As the wire tightened, it got caught on a bolt on a motor of the take-up. The wire was pulled tight and caught the employee's finger against the reel flange amputating the employee's fingertip.",0
An employee was adjusting a roller line. The line dropped on the employee's left little finger and amputated it.,0
An employee was standing near a conveyor table in a training capacity. A metal tubing weighing approximately 587 pounds struck the employee as it rolled off the conveyor table after being jammed. The employee sustained back injuries.,1
Employees of Ganim Company were setting up a work zone when a vehicle crashed into a company buffer van from behind. The van was pushed into a company truck with an arrow board attached to the back. The truck then struck three employees that were on foot. Two employees received scrapes and bruising. The third employee sustained a broken fibula and a hole in his leg.,1
"An employee was working from an 8-foot ladder, pulling cable in a ceiling space. He contacted exposed wires and fell from the ladder to the concrete floor, suffering a head injury. The employee was hospitalized.",1
"While cleaning a tote, an employee was cutting out residual glue using a utility knife. The employee slipped and the utility knife lacerated his bicep. The employee was hospitalized.",1
An employee had been driving and collecting trash. The employee's left middle finger was caught in a pinch point between a dumpster and the trash truck resulting in amputation at the first knuckle.,1
An employee was clearing a jam in a palletizing machine when the machine energized trapping the employee's arms. The employee was hospitalized with a fractured left forearm and a puncture wound to the right arm.,1
"An employee was lifting a 100-pound exhaust manifold off an engine using a service truck crane. While he was maneuvering the manifold toward the bed of his truck, it struck his left index finger and caught it against a pressure relief valve. He suffered a laceration and fracture to the finger and was hospitalized.",1
An employee was walking on a pathway while carrying umbrellas to take to the lawn. It was pouring rain and the employee slipped and fell on the wet sidewalk fracturing his right ankle.,1
"An employee was repositioning a wooden board that did not feed properly into a saw. The board then became jammed. The employee reached to grasp the board and their left middle finger became stuck between the fence and a moving chain, resulting in a fingertip amputation.",0
"On 6/01/2022, an employee was walking to lunch, crossing over rebar that was bent flat to prevent impalement. The employee tripped on the rebar and fell. In front of him was a window leave out for a tilt wall concrete panel (in casting position on the ground). With the window opening, the concrete is finished with rounded edges. The employee impacted the rounded edge with his left upper thigh and hip area and sustained a fractured femur requiring hospitalization and surgery.",1
"On June 1, 2022, an employee was testing the voltage of a transformer when two fuses blew apart resulting in burns to the employee's hands and forearms.",1
An employee was using a butcher knife to separate pieces of meat when the knife slipped and cut his abdomen. The employee was hospitalized.,1
"An employee was loading material into a shear press. The employee's left middle finger was caught between the clamp and the material, and the fingertip was partially amputated.",0
"An employee was riding the forks of a skid steer when the skid steer hit a bump, throwing the employee off the forks. The skid steer then ran over the employee fracturing their pelvis and a leg.",1
"While adjustments were being made on the manufacturing line, an employee's right index finger was pulled through a set of rollers. He sustained an avulsion to the finger and required medical amputation to the top portion of the finger.",0
"On June 2, 2022, an employee was in a scissor lift, loading a piece of industrial equipment onto a flatbed truck. The employee was disconnecting a four-leg sling when one of its legs caught the bottom of the scissor lift, which was lifted about 8 inches. The employee fell from the scissor lift to the ground 10-12 feet below and suffered fractured vertebrae, a dislocated thumb, and a cracked rib. The employee was hospitalized.",1
An employee was using an overhead hoist to move pipes when their right thumb was crushed between two pipes. The thumb was amputated to the knuckle.,0
An employee was climbing down a three-step stepladder after retrieving a box from an upper overstock level. She fell at the last step and broke her left leg.,1
"The entire crew was performing preventative maintenance checks. An employee pulled out a retractable shelving unit containing a single compartment and mounting assembly. In the compartment were self-contained breathing apparatus (SCBA) containers. While he was pulling out the drawer, the mounting assembly slid down on his finger and amputated his left middle fingertip.",1
An employee dropped a basket into a pasta cooker and reached to retrieve it. The employee's hand was burned by boiling water.,1
"While descending a 6-foot step ladder, an employee fell from the second rung and landed on the concrete floor, fracturing his right hip.",1
An employee was mowing the lawn at a client's property when he lost control of the mower at the top of a hill. The mower started heading toward a cluster of pine trees. The employee exited the mower and landed on the ground. His left hand went under the mower and the index finger was amputated.,1
"An employee stepped off the end of a sidewalk onto an unimproved surface, tripped in a hole, and rolled 10-15 feet down an incline where her right leg contacted the extended tow arm of a parked tow truck. The employee's right femur was fractured and required surgery.",1
"The injured employee was helping another employee with the insertion of a securement pin when their right middle finger was caught between the pin and the slot, causing a partial amputation to the fingertip.",0
"An employee was using a tug to move mail equipment to various locations. The tug struck a wire cage container and the employee was thrown to the floor, landing on her right side. The employee sustained a broken hip requiring hospitalization and surgery.",1
"Two employees were carrying a car frame. It fell onto one employee's foot, crushing it. He was hospitalized.",1
An employee was attempting to free a bin that was stuck in the hopper of a paper shredding truck. The employee fell approximately 6 to 8 feet off the side of the truck and landed on the ground sustaining a concussion and a fractured L2 vertebra.,1
An employee was on a ladder trimming a tree when the ladder slipped out and the employee fell to the ground sustaining injuries to the left hip and leg.,1
"An employee was conducting inventory counts utilizing a step stool. When the employee took a step to descend from the stool, he fell to the grated floor, injuring his teeth, upper lip, and arm.",1
"At about 12:00 p.m. on June 2, 2022, a drill fell off an employee's tool belt and its bit punctured his leg. He was hospitalized.",1
"Employees were rigging down. The injured employee was hooking up a flow line to a manifold. When he stepped back, he fell through a gap in the floor of the shaker, landing on his head on the ground about 12 feet below. He suffered multiple skull fractures and bleeding on the brain and was hospitalized.",1
An employee fell while getting out of a waste vehicle. He suffered lacerations to the back of his head where it struck the hard ground.,1
"An employee was greasing a straightener through a grease fitting. A roller caught the employee's left hand, causing an avulsion to the hand.",1
"An employee was ascending a spruce tree and positioned his lanyard around two branches. The branches broke and the employee fell approximately 20 feet to the ground, landing on his side. The employee sustained a fractured wrist and a fractured vertebra.",1
"An employee was working from a 6-foot ladder, installing a light fixture. The employee fell, suffered a head injury, and was hospitalized.",1
An employee was moving steel into position on a steel rack so that a forklift could transport it. The steel rolled onto his right hand resulting in injury to his ring finger that required medical amputation.,0
An employee was cutting beef with a bandsaw and amputated his little finger. The employee was hospitalized.,1
"On June 3, 2022, an employee of Blass Construction was ripping laminated flooring materials with a rotating saw blade when its blade caught the employee's left hand. The employee suffered partial amputation of the left middle, ring, and pinky fingers.",0
An employee was pushing a rolling metal cart when her left hand got caught between her cart and another employee's cart. The employee was hospitalized with a hand injury.,1
"At 3:30 p.m. on June 3, 2022, two employees were unbundling a chassis, which had a harness on its wheels to prevent them from moving. As the employees pried the harness off from both sides, it came loose and fell on one employee's lower leg.",1
"On June 3, 2022, an employee uncoupled a 10-foot transfer hose that had been cleared of 29.4% ammonium hydroxide the previous day. Vapor from the chemical overcame him and he was hospitalized.",1
"Two employees were threading material through a slitter machine when the corner of the material got caught on a roll in the machine. One employee attempted to clear the jam when the machine cycled, which crushed the employee's hand and resulted in injuries that required hospitalization and surgery.",1
"An employee was performing their normal duties as a tire assembler when a tire's sidewall came off the guide on a machine. The employee reached over the drum to re-engage the sidewall back onto the guide. While making the adjustment, the machine cycled and the sidewall knife contacted the employee's right middle finger amputating the fingertip between the bottom of the fingernail and the knuckle closest to the fingernail.",0
"On June 3, 2022, an employee was using an air hoist to reposition a 1,900-pound iron casting in the cleaning room. The casting fell off the hoist and landed approximately 1 foot below on the employee's feet resulting in broken bones in both feet.",1
An employee was unloading 25- to 30-pound packages from a truck on a day when the outside temperature was in the middle to upper 80s Fahrenheit. He developed heat-related illness.,1
"An employee was loading parts into a pneumatic press machine when a part became jammed. The employee was attempting to re-center the part when stored energy was released and the employee's fingers were caught in the machine, resulting in a partial amputation of the left index finger.",0
"An employee was helping bring down a stand from a register. She lost her balance and fell to the floor, suffering a hip injury.",1
"An employee had just mounted a double walkie-rider and was pulling out of its parking spot. While making a sharp turn, the employee fell off the operator's platform and landed in front of the walkie-rider as it collided with a second, parked walkie-rider. The employee's right leg was struck by both machines' operator platforms and suffered fractures to the right tibia and fibula.",1
An employee fell to the floor and suffered a broken hip while clocking in for the day.,1
An employee was under a pickup truck troubleshooting the transmission. The truck rolled backward and the employee was pinned under the pickup truck. The truck's left front wheel crushed the employee's right shoulder against the ground. The employee was hospitalized.,1
"An employee slipped and fell on the tile floor, sustaining head and back pain.",1
"A temporary employee used a hoist to load a roll of product onto a machine. The employee then lowered the roll to the ground to reposition it. After repositioning, the employee activated the hoist using the remote in her left hand. The chain of the hoist tightened around her right index finger and amputated the fingertip to the first knuckle.",0
"An employee was using a manual hoist to lift a roll of fabric when their right index fingertip was caught between the chain and the hook, or between the hook and the roll. The fingertip was amputated without bone loss, at the joint closest to the fingernail.",1
An employee was running a powered granular parch material into a hopper with a rotating auger at the bottom of the hopper. The employee's glove was caught by the auger pulling his hand into the auger screw and amputating two fingertips.,0
"An employee was working on a ladder to install trim joist hangers on a carport when a beam in the carport failed and the carport collapsed. The employee fell from the ladder to the ground below, resulting in a cut to the back of their head that required hospitalization.",1
"An employee was emptying a plastic bucket of soils around a newly planted tree using a hay hook to assist. The hay hook suddenly broke free of the plastic bucket and struck the employee in the right eye, resulting in blunt-force trauma injuries to their eye.",1
"On June 6, 2022, an employee was working inside a live electrical panel, part of a pump station system for water irrigation on a golf course. While he was troubleshooting, a wire connected to the system was dragged across the 480-volt fuse for the variable frequency drive, a type of motor controller. The resulting arc flash caused burns to his left hand, arm, and the backs of both legs.",1
"A work pickup truck backed over a C.W. Matthews employee in a highway construction zone. The employee suffered a fractured neck vertebra, fractured ribs, and head and body lacerations.",1
An employee was sorting empty compressed gas cylinders. The employee tripped and a cylinder fell over and struck his right leg. He suffered a broken femur and was hospitalized.,1
"An employee was sitting in his car outside a shop. A tractor and trailer pulled out of the bay and turned, at which point the trailer struck the car on the driver's side. The employee's legs were caught between the door and the car, and both legs were broken.",1
An employee was operating a press when it crushed two of their fingers resulting in amputation.,1
"An employee was on a ladder and the ladder was secured on a communications strand (flexible cable). He reached over to secure his safety harness and the ladder slid a bit causing him to fall about 15 feet to the ground. He sustained multiple injuries to his right leg, ankle, and foot.",1
An employee was changing the bit of a magnetic drill when the machine activated. The chuck key punctured the employee's left hand under the knuckle of the middle finger. The employee was hospitalized.,1
"An employee had been using a truck-mounted winch system to load or unload a roll-off box. The ""D"" ring of the reeving system came off the hook that was manufactured on the dumpster, striking the employee in the chest and face. The employee sustained multiple fractures and the loss of an eye, which was surgically removed.",1
An employee was maneuvering a part into a mill to deburr holes. The mill bit grabbed the employee's glove and amputated the first inch of their right index finger.,0
An employee was standing next to a chain to observe it entering the housing. The 3/4-ton chain jammed while it was being pulled by a forklift and broke a 5-foot long pipe. The pipe launched 25 feet in the air striking the employee. The employee was hospitalized with a broken left leg.,1
An employee was working on top of an injection molding machine. The transfer ram cycled and the employee's middle finger was caught between the ram and the machine's well. The employee suffered an amputation to the finger.,0
An employee slipped on ice and fell off a crate while retrieving cases of product from a frozen food freezer. She suffered a compression fracture to a vertebra.,1
A security officer was helping to restrain a patient and suffered a laceration to the right hand and a bloody nose. The right hand became infected and required surgical debridement.,1
"On June 4, 2022, at 1:00 PM, an employee was using a scrubber machine to strip and clean the floors in a facility. The employee slipped on stripping chemicals and fell to the floor. The chemicals saturated their clothing resulting in burns to the skin. The employee was hospitalized.",1
The injured employee was driving a forklift and the forklift veered and struck a steel column. The injured employee sustained multiple cracked ribs and a displaced sternum and was hospitalized.,1
"An employee was installing an anchor bolt and nut on a concrete traffic barrier. The barrier was pulled on, and the employee's left index finger was caught between it and the bolt. The fingertip was amputated.",1
"An employee was involved in an argument with a customer in a restaurant's dining area. The argument became physical, and the employee suffered three broken ribs, a concussion, a punctured lung, multiple bruises, and an ear injury requiring stitches.",1
An employee was cutting a cake with a hand knife. The knife severely lacerated her right hand. She was hospitalized.,1
"During the first billet extrusion, the billet accelerated from a release of pressure. An employee's glove was caught on the extrusion and the employee sustained a finger amputation, two broken finger0, and a fractured wrist.",1
"An employee was accessing a leaking valve on the underside of a planter. The employee had to bend/contort their body in order to get in position to block up the valve. While putting the valve back together, the employee experienced abdominal pain and nausea. The employee sustained a hernia.",1
An employee had been roping a calf. The employee became tangled in a rope and was dragged by a horse. The employee sustained broken ribs and a punctured lung.,1
An employee was stocking shelves when she tripped over a cart and injured her left hip on the floor.,1
An employee was helping a client move when their legs became tangled and they fell. The employee suffered a broken leg.,1
A large cylinder on a hydraulic press machine broke and the cylinder tube struck an employee's left leg. The employee was hospitalized.,1
"An employee was transferring plastic film from one roller to another. The film caught his arm while the rollers were turning, and he suffered a forearm fracture. He was hospitalized.",1
"An employee was cleaning a drain cover when he dropped the drain cover and it fell onto the tip of his left middle finger, resulting in an amputation with no bone loss.",0
"On June 6, 2022, at 7:30 p.m., an employee was threading plastic through a roller machine when the 250-degree rollers contacted the employee's wrists, resulting in burns on both wrists.",1
An employee was stepping out of a seating row and into the main aisle of a motor coach. The employee's ankle rolled and was broken.,1
"An employee fell off a grain bin that collapsed. He sustained a laceration to the forehead, and injuries to the shoulder, leg, and knee. The employee was hospitalized.",1
"An employee was tightening a bolt for a conveyor on a malfunctioning bottomer machine.  The reflector aligned with the sensor and energized the motor, causing the outfeed conveyor chain to start turning. The chain amputated the tip of his left index finger.",0
"An employee was de-energizing a 4,160-amp station service transformer when an arc flash occurred, resulting in burns to their face.",1
"On June 5, 2022, an employee was walking to plug in a box fan electrical cord. He tripped over its cord and fell to the floor, suffering a broken humerus.",1
"On June 5, 2022, an employee was unloading a truck when they fell between the truck and a dock plate that was positioned upward. The employee suffered internal bleeding and a contusion on their left leg that required hospitalization.",1
"An employee was using a 7.25-inch circular saw to cut a shim out of a 2-by-4 when his left index finger got caught underneath the saw, resulting in an amputation of the finger pad.",0
An employee was stacking boxes on a pallet when he tripped on plastic. His knee struck a stock picker platform and was lacerated. The cut later became infected and he was hospitalized.,1
"On June 5, 2022, an employee was dispatched to remove a tree that had fallen on a communication cable. A large limb from the tree was hanging from the communication cable like a swing and was  close to the ground. The employee was standing on the ground using a chainsaw to cut the limb bit by bit. As the limb was cut the communication cable moved up and released the tree limb. When the tree limb fell it pushed the back of the employee's hard hat causing him to fall face down on the ground. The limb then landed on his ankle. The employee was hospitalized with fractures to the right ankle, left wrist, and T6 vertebra.",1
An employee was feeding product into a slitter. The employee's left hand was on a tension stand and their right hand was changing a felt pad. The employee suffered a finger amputation on their right hand when their finger was pinched on the pad plate.,0
"An employee was working while on the canopy of a passenger terminal building when they fell several feet to the ground below, resulting in severe pain to the right leg, arm, and face.",1
"An employee was on a manlift approximately 5 feet above the ground while adjusting the rigging on a 12-foot granite column weighing approximately 12,000 pounds. The rigging failed and the column struck the manlift, causing a crush injury to the employee's leg.",1
"An employee was operating a stand-up forklift. The employee's left foot was pinned between the lift and a support beam, resulting in an open fracture to the foot.",1
An employee was bending a part. The employee's left index fingertip was caught and amputated between the part and the upper tooling.,0
"An employee was adjusting film guides to thread film over a film anvil and splice in a new roll. As the employee was tucking the film into the holes underneath the film anvil, the anvil dropped and struck his right forearm, forcing it down to the bottom bracket. The employee suffered a broken forearm.",1
An employee was operating a pallet jack when he lost balance and put his left foot down. The pallet jack then jerked and his left foot was caught between a rack guard and the pallet jack. The employee suffered a foot fracture.,1
An employee was unloading a beam from a skid onto a robot weld cell. He rolled the beam over onto its side so it could be picked up with a magnet crane. Another beam rolled over and pinched his right thumb against the first one. The thumb tip was partially amputated.,0
A crane operator was lifting steel beams when one of them struck his legs. He suffered a broken left ankle.,1
An employee was working at the beach renting chairs when they began to experience severe muscle cramps due to the heat. The employee was hospitalized for heat exhaustion.,1
"An employee was getting into a truck. The step of the truck scraped the employee's leg, causing an infection with cellulitis that required hospitalization.",1
"An employee was installing anchor points on a roof when they fell 20 feet to the concrete below, resulting in a broken back.",1
"An employee was servicing an automated control system while on a 6-foot ladder when he fell from the ladder to the floor below, resulting in a broken wrist and cut to the inside of his mouth.",1
"At 9:30 p.m. on June 6, 2022, an employee was in a trench, using a roller machine to compact dirt on top of newly installed sewer pipes. He was trying to back up to turn around when one of the machine's back wheels went up the side of the embankment. It started to roll and the employee jumped off; it then rolled on its side and pinned him underneath. He suffered a facial fracture and a head wound that required staples.",1
"An employee was standing on the ground, cleaning a wall with a reach brush. The employee tripped on a guardrail while stepping backward. He fell to the floor, landing on his left hip and breaking it.",1
"An employee and a co-worker were realigning iron molds so they could remove concrete boxes from the molds. The co-worker was operating a backhoe and the injured employee was on the ground maneuvering the mold to the desired location using a spreader bar attached to a chain that was hooked up to the front end of the backhoe. The chain broke and the employee's index finger became caught between the spreader bar and the concrete mold, resulting in a fracture that required hospitalization.",1
An employee was retrieving their cell phone from the fryer. The employee's right hand was burned by hot cooking grease.,1
"An employee was sanding the rough edges of a stainless ring with a 12-inch disk sander. The sander pulled the ring into the disk, causing his left hand to be pulled in in turn. Four fingers on the hand were lacerated.",1
An employee was trying to remove a piece of lumber that was stuck in a conveyor belt. The employee fell 3 feet to a catwalk and suffered a compound fracture to the leg/shin area.,1
"An employee was operating a pallet jack when the pallet jack ran over his left foot, resulting in a laceration near his big toe and hospitalization.",1
"An employee was in the bed of a pickup truck to retrieve straps to load a piece of equipment. As the employee climbed off the tailgate of the truck, his foot got caught in a strap and he fell to the ground, resulting in a broken hip.",1
"An employee had been sweeping floors. While using a knife to remove material that was bound around the brush on the sweeper, the employee cut their knee with the knife.",1
"An employee was laying insulation for a metal roof. The employee fell from the roof to the ground and suffered fractures to the legs, ribs, and face.",1
An employee was adjusting the blade on a cutter-mixer machine when the blade engaged while their right hand was inside the mixer. The employee suffered a laceration to their thumb and an amputation of their index finger.,0
"An employee was sitting in a chair at a table. When she pushed back from the table, the chair tipped to the side and she fell to the floor. She suffered a broken right hip and was hospitalized.",1
"An employee was inside a confined space removing a door to a furnace and inhaled nitrogen oxide, causing loss of consciousness.",1
An employee was wrapping a pallet with shrink wrap when they tripped over the pallet and fell to the ground. The employee sustained a fractured right hip.,1
"An employee was walking with a piece of medical equipment. The employee tripped and fell, suffering a twisted ankle and a possible head injury. The employee was hospitalized.",1
"An employee was helping to install a package air conditioning unit on a custom build table stand. The unit was set down but the corner did not go all the way down and struck the employee's left hand, resulting in amputations of the middle and ring fingertips.",0
"An employee was throwing trash bags up from the basement to the street level. The employee lost his footing on the third step and fell down 2.3 feet to the basement floor, hitting his face and landing on metal siding. The employee suffered a loss of feeling in the right arm and right leg, which required surgery.",1
An employee was cutting concrete with a slab saw at the roof level of a warehouse. The employee felt ill and was taken down to ground level. The employee was hospitalized with a possible heart attack possibly linked to the heat.,1
An employee fell down stairs and was hospitalized.,1
"An employee was using a truck to barricade a road. A motor vehicle, traveling at about 65 miles per hour, rear-ended the truck. The employee suffered a lip laceration, fractured vertebrae, and a tear in the inner layer of the aorta.",1
"At 8:30 p.m. on June 7, 2022, an employee became ill while working with a crew to adjust solar dampeners. He was hospitalized that afternoon for heat illness and a heat-related muscle injury. On the day before, he was installing dampeners for 10 hours and experienced symptoms of heat illness.",1
"An employee and a co-worker were attaching a load to a forklift when the forklift began to roll, pinning the employee and putting pressure on his lower right leg, resulting in a fracture that required surgery.",1
An employee was moving a stacker crane. The employee's foot was caught and crushed in a pinch point between the moving crane and the stationary track.,1
"On June 7, 2022, an employee was operating a forklift being loaded onto a semi-trailer when a wheel rolled over the side of the truck and the lift fell approximately 3 feet. The employee suffered fractured ribs and an injury to one vertebra.",1
"Two employees were working on a transporter screw that was stuck. One of them pulled on the belt to free the machinery, and it started moving. His left index finger was caught between the belt and the pulley, and the fingertip was amputated.",1
An employee was standing in a warehouse. A riding pallet jack struck the employee's lower leg.,1
"An employee was cleaning a coffee machine when hot water from the machine splashed onto the employee's back, resulting burns. The employee was hospitalized.",1
"An employee was using a handheld drill to remove a screw between a cage and a pallet. The gauze of a previous non work-related injury to their fingers was caught in the rotating parts of the battery powered hand drill and pulled on the employee's ring and middle fingers, resulting in two fingertip amputations.",0
An employee was installing secondary support bracing on a structure when a burst of wind caused the structure to collapse onto the employee. The employee was hospitalized.,1
"An employee was making a technical repair on a rolling staircase. As the employee descended the staircase, they tripped and fell to the ground, resulting in a fractured left humerus that required surgery.",1
An employee suffered a broken leg while making repairs to a dishwashing machine.,1
"An employee was operating a utility vehicle on a loading dock when they lost control and the vehicle drove off the loading dock. The employee's left thumb was caught on a safety chain as the equipment drove off the loading dock, resulting in a fractured left thumb.",1
"An employee was exiting a loader in a recycling trailer when he slipped on the bottom rung of the loader and struck his head on a wall, resulting in a concussion.",1
"An employee was working on a hydraulic knife used for cutting paper for recycling when the knife came down on the employee's left leg and foot, resulting in a laceration that required hospitalization.",1
"An employee was moving a 1,200-pound block of steel using a jib crane with a magnet. The magnet failed and the part fell off, breaking the employee's leg.",1
"An employee was on his knees, trying to move packages in the back of a truck. He pulled his back, suffering severe pain, and was hospitalized.",1
An employee tripped on concrete while exiting a parking structure. She suffered a broken left hip.,1
"An employee was walking in a food preparation area when they tripped over a bread rack and fell, resulting in a broken arm.",1
An employee was operating a hydraulic tamper. Hydraulic oil leaked from a pinhole in its hose and was injected into the employee's left middle finger.,1
An employee was trying to prevent a patient from entering an unauthorized area. The patient fell on the employee's right hand injuring the employee's right little finger.,1
An employee had just replaced a hydraulic hose on a machine and was checking for leaks. The machine cycled as the employee's right hand was resting at the ram. The employee's index finger was amputated at the first joint. The ram was not guarded at the time.,0
"An employee was operating a saw when their hand became caught in a clamp, resulting in a fractured hand.",1
"An employee was working from a pump jack scaffold system to install siding on a structure. The employee fell from the scaffold platform to the ground and suffered injuries to the head, shoulder, leg, and hands. The employee was hospitalized.",1
"An employee was using a high-pressure air gun to clear a jam in the augers of a machine when the machine was activated, contacting the employee's finger and resulting in a finger amputation.",0
An employee was using a metal paddle to scrape the side of a hopper. The paddle was pulled into the hopper and the employee's right ring finger was pinched between the handle of the paddle and the guarding bars. The fingertip was degloved and the injury required surgical amputation to the fingertip.,1
"On June 8, 2022, an employee was packing titanium powder into a 55-gallon drum contained in an aluminum dumper. The employee used their hands to grasp the trays and dump them into the drum.  The powder dumping process creates a dust plume. The dust plume ignited, possibly due to static charge. A flash fire occurred and the employee suffered burns on the top of both hands.",1
"An employee was installing new windows from a supported scaffold at a two-story single-family  home when they fell approximately 20 feet from the second tier of the scaffold. The employee suffered seven broken ribs, a punctured lung, a lacerated kidney, and facial fractures, requiring hospitalization.",1
"An employee was grading a trench inside a trench box with the assistance of a machine operator who was using the teeth of his bucket to help with a pile in the trench box. The employee was struck by the bucket and pinned between the bucket and a spreader bar, resulting in a broken arm, center mass bruising, bleeding of the liver, and a few fractures where his ribs meet his spine.",1
"An employee was closing a bank vault door when their finger got stuck in the door and crushed, resulting in a partial amputation.",1
"An employee was walking on a platform when they tripped and fell onto the platform, resulting in a broken hip.",1
"An employee was feeding a 25-foot pipe into an inbound punch straightener. The employee was positioning the pipe with a cheater bar with his right hand on the cheater bar and his left hand on the railing of the punch straightener. The pipe contacted the employee's left thumb on the railing, resulting in a partial amputation.",1
"An employee in the field was troubleshooting an operation control issue on a 480-volt irrigation pivot. While perched on the built-in ladder, the employee's screwdriver made contact with an energized contactor screw, resulting in an electric shock. The employee was temporarily disoriented, felt chest pain, and climbed down from the equipment. The electrical shock caused an irregular heartbeat.",1
"An employee was clearing a jam in the paper-cutting device of an insulator when paper fed into the point of operation and the employee's left thumb became caught in the machine, resulting in a fingertip amputation.",0
"An employee was driving a reach truck down an aisle when the truck collided with a structural column. The employee's arm left the operator's compartment, and the employee suffered a broken arm.",1
"On June 8, 2022, an employee was walking down a set of stairs while taking out a bag of garbage when they fell down the stairs to the ground below, resulting in a potential concussion.",1
"An employee was using a die inverting machine. The employee tried to move out of the way of automotive parts that were falling off a line, but his right foot got caught on the guard of the machine. The parts fell onto the employee's lower right leg, resulting in a compound fracture. The employee was hospitalized for surgery.",1
An employee was standing on a trailer when they fell 2.5 feet to the ground and broke a leg.,1
"A temporary employee was using a powered hand grinder to cut a piece of ultra-high molecular weight polyethylene plastic. The hand tool contacted the employee's left wrist, resulting in a laceration.",1
An employee was walking with a patient when the patient tripped on a wheelchair scale. The employee tried to catch the patient and sustained a neck injury. The employee was hospitalized and required surgery.,1
"An employee was operating a table saw when his left hand contacted the blade, resulting in amputations of parts of his ring and little fingers.",0
"An employee was walking in an office when they tripped and fell, resulting in a sprained ankle.",1
An employee was moving trash carts when their right thumb got caught between two carts resulting in amputation of the thumb tip.,0
"An employee was using a pushing shear machine mower. As he was pulling the mower out of a bed of plants, he encountered a parked trailer behind him and fell backward. His left foot contacted the mower blade, which lacerated his foot and broke the little toe in three places.",1
An employee was wakeboarding; being towed behind a 20-foot inboard boat. He was attempting an inverted maneuver that included jumping from one wake to the next while doing a flip. The employee landed on top of the wake causing his board to stop; his momentum carried him forward causing impact against the board. The employee sustained an open fracture to the right tibia and fibula.,1
"An employee was cutting rebar with a rebar cutting and bending machine. The rebar lifted his left hand against the top guard of the point of operation, causing lacerations to the middle and ring fingers.",1
"An employee was attempting to remove an air line from a fireball pump when their right hand got caught by the piston on the pump, resulting in a fingertip amputation on the ring finger.",0
"An employee was shoveling a pile of manure onto a manure belt. The employee was attempting to clean up manure that fell off the belt when his long-sleeve shirt got snagged in a manure belt, causing his left arm to get pulled in between the belt and roller. The employee suffered a fractured arm and loss of skin on his arm and hand. The machine was in operation at the time of the incident.",1
"On 6/8/2022, at 10:00 AM, a rewinder operator was clearing a tissue jam at the rollers when the reset button at the control panel was activated. The operator's left middle finger was caught between the rollers resulting in partial amputation of the finger.",0
"An employee was cutting a piece of wood on a table saw. The wood bound, then jerked forward as the employee tried to free it. His hand was pulled into the blade and lacerated.",1
"An employee and a contractor were on the roof of a warehouse to assess leaks when the employee stepped onto a skylight and fell approximately 25-30 feet to the floor of the warehouse. The employee suffered an L2 vertebrae break, a compound radial fracture of the left elbow, a dislocated left shoulder, a fractured left hand/wrist, and a fractured right foot.",1
"An employee was repairing an electrical system while on a scissor lift. He received an electric shock and fell 15 feet to the ground below, resulting in multiple fractured bones.",1
"An employee was drilling a hole. The employee's glove wrapped around the bit extension, causing the drill to amputate the employee's left index finger.",1
"An employee slipped and fell in a bathroom, striking their head on the sink and their hip on the floor. The employee suffered a hip injury that required surgery, as well as a head injury, and was hospitalized.",1
"An employee and a customer were pulling a pallet of auto parts from a truck. The employee lost his grip on the pallet and fell from the pickup truck to the ground below, resulting in a broken left hip.",1
"An employee was winding cable back onto a reel when two fingers on their left hand got caught between the cable and a roller, resulting in a fractured finger and the amputation of another finger.",0
"An employee grabbed two pallets from the shipping lane and loaded them onto the trailer. The employee got off the powered industrial truck to adjust the bread rack when the truck accelerated toward her. The truck pinned the employee's right hip and leg to the wall of the trailer, resulting in a pelvic fracture.",1
An employee was handling merchandise in the freezer area. The employee picked up a 40-pound box and felt pain in her abdomen. The employee was hospitalized with a muscle strain.,1
"An employee was using a 30-inch grinder to grind an aluminum casting when the grinding wheel exploded causing shrapnel injuries to the employee's abdomen and thigh. When the wheel exploded, it also pushed the aluminum casting into the employee with force.",1
A car rental employee was walking between two vehicles when a customer-driven vehicle struck her. She suffered a broken right hip and contusions to the right knee and left arm.,1
"An employee was on an elevated platform removing green ribbon off units. The employee was stepping down from the 8-inch platform to the floor to throw away a ribbon when he twisted his ankle, lost balance, and fell directly onto his right side. The employee sustained a fractured right hip.",1
An employee was adjusting a filling machine when their right little finger became caught between the structure of the machine and a moving crossmember. The employee suffered an avulsion that resulted in a partial amputation of bone during a medical procedure.,0
An employee was moving OHC from a molding area to a caging area. The employee stepped onto a motorized cart while the cart was in motion. The employee's left foot was pinched between the cart support and a rail resulting in a laceration to the heel.,1
An emergency room nurse tripped over a power cord and fell to the floor resulting in a fractured hip requiring hospitalization.,1
"The injured employee was working near a co-worker. The co-worker was removing scrap coil from a hopper when it fell out of the hopper and struck the employee, resulting in injuries to the lower left arm, hip, and back, as well as straight-line fractures of the pelvis.",1
"An employee was wiping down the discharge belt of the trash conveyor when her rag was pulled into the machine. While retrieving the rag, the employee's hand was pulled into a pulley and became lodged in the conveyor resulting in a thumb amputation.",1
An employee was using a picker to pull door glass from a shelf. The employee fell 10 feet from the picker to the ground and fractured their left ankle.,1
An employee missed the bottom step while coming down from a 2-step ladder. The employee fell to the floor and fractured their right tibia.,1
An employee was trying to unjam a trolley. The employee's right index finger was caught between the trolley and a frame and was amputated between the first and second joints.,0
While cleaning a patient's room an employee had a reaction to a cleaning chemical and suffered a severe asthma attack.,1
An employee was carrying a box of socks when she tripped on a pallet and fell on the floor. The employee sustained fractures to her leg and ankle.,1
"At 6:30 a.m. on June 9, 2022, an employee was reaching for a piece of scrap at the rear of a CNC machine. He got caught in the safety wire and fell to the concrete floor, suffering an injury to his left hip.",1
"On June 9, 2022, an employee was installing a timing belt on a glue/banding machine. The employee's right ring finger entered a nip point between the belt and the machine resulting in a fingertip amputation.",0
"An employee removed chains from a beam, then picked up on the crane. The tip of the chains caught a flange on the beam and tipped the beam over onto the employee's right foot resulting in fractures.",1
An employee sustained back pain while installing a diesel exhaust fluid (DEF) filter on a trash truck.,1
An employee fell while loading a trailer and suffered a fractured left knee.,1
"An employee was on a 10-foot step ladder that was leaning against a wall. The employee was hanging a poly barrier when the ladder slipped, causing them to fall to the concrete below and suffer broken ribs.",1
"An employee was running out of the store to return a bag to a customer when they were struck by a customer's vehicle in the parking lot. The injured employee sustained fractures to the pelvis and skull, and had swelling of the brain.",1
"An employee grabbed a chain while walking around another employee. The chain broke and the employee fell to the floor, suffering a broken hip.",1
"On June 9, 2022, at approximately 8:00 PM, an employee working in the dock area of the facility was found with a laceration to the back of their head resulting in a hospitalization. The employee may have passed out from dehydration.",1
An employee was moving a sealed cylinder of carbon monoxide when he stepped on plywood that was being used as temporary deck protection. He tripped and fell; a piece of angle iron broke his fall and the cylinder landed on him. He suffered broken ribs.,1
"An employee was on top of a trailer and miss-stepped, falling forward and striking his head on the trailer. The employee sustained fractured vertebrae in their neck.",1
"An employee tripped over another employee, fell, and suffered a broken humerus and a dislocated shoulder.",1
An employee was opening a valve on a tank and came into contact with corrosive alkali liquids. The employee sustained chemical burns.,1
"An employee cleaned a spill of chemicals including ester, amine, and amide. The employee then cleaned a spill of sodium sulfite which mixed in the disposal container with the chemicals from the previous spill. A chemical reaction resulted and the employee inhaled sulfur dioxide gas. The employee was hospitalized.",1
"An employee was using a 3-foot ladder to replace the molding above the door outside an apartment unit. While descending the ladder, the employee fell and missed the last step as the right leg of the ladder gave way. The employee then fell to the floor and landed on his left hip, resulting in a hip fracture.",1
"On June 9, 2022, at 10:45 AM, an employee was standing on a trailer deck (tailgate) waiting for the customer to lower an empty poultry cart down using a scissor lift. The cart fell off the lift from 25 feet above the employee and struck the employee's left arm resulting in a broken radius and ulna.",1
"An employee was using a chainsaw tool to guide a nylon rope back onto a winch when his left hand got caught in the winch. The employee sustained amputations up to the middle knuckles of the little, ring, and middle fingers. The little and ring fingers were reattached.",0
"The injured employee was working from an extension ladder and dropped a screwdriver. The injured employee asked the employee that was holding the ladder to get the screwdriver. When the other employee let go, the ladder slipped and the injured employee fell to the ground sustaining a dislocated left wrist and a broken left knee.",1
An employee was using a circular table saw to cut a piece of rubber when his hand slipped and the blade cut his right index finger resulting in a partial amputation. The employee was hospitalized.,1
"An employee was squatting on the tracks of a bulldozer, inspecting it and taking photos. He stood up to attend to someone talking to him and his foot slipped off the outside of the track and he fell from the bulldozer. As he fell, his right leg became stuck between the roller frame and push arm resulting in a fractured tibia and fibula.",1
"An employee was placing vases on top of a cabinet. While stepping off the step stool, the employee fell to the floor and sustained head trauma.",1
"An employee was working at a drawer notcher. While clearing sawdust build up, the employee's fingertip contacted the rotating blade, which required surgical amputation to the tip of the right index finger.",0
"An employee cut two fingers on the belt of a tub washing machine, resulting in amputation to the tips of the right middle and ring fingers.",1
An employee was removing a board from beneath a barrel when the barrel pinched their fingers resulting in a partial amputation to the little finger.,0
An employee's finger was caught in a closing door resulting in an amputation to the fingertip.,0
An employee was cutting a 2-foot piece of wood with an electric saw when the saw amputated his right middle fingertip.,0
"An employee was walking to his vehicle when he lost balance and fell onto the cement on his left knee, resulting in an injury.",1
An employee was removing tile from the floor using a propane-operated tile removal machine. He became light-headed and was hospitalized with carbon monoxide poisoning.,1
An employee was cleaning a machine when their hip struck the power switch. The employee's left hand got caught in the machine resulting in amputations to a finger and the thumb.,0
An employee was trying to step over a chain link barrier when his foot got stuck. He fell and broke his leg. He was hospitalized.,1
"On June 10, 2022, an employee was loosening a bolt to change out a polish filter. Hot water with dissolved sodium carbonate sprayed out of the filter and splashed the employee resulting in second degree burns on the right side of their torso and upper right leg.",1
"An employee had been unloading material from his truck in the parking lot and was struck and pinned against his truck by a dump truck, crushing his left leg from the knee down.",1
"An employee was attempting to retrieve a cell phone when their left middle finger got caught in between a chain and gear drive, resulting in a broken finger and fractured wrist.",1
"On June 10, 2022, an employee was troubleshooting a kneader machine when the machine cycled as the employee was adjusting a switch, resulting in an amputation of the right ring fingertip.",0
An employee had been operating a press. The employee was removing the air shaft from a paper roll when the pad of their right middle finger was amputated.,0
An employee was operating a machine when the machine's pneumatic ram amputated their left middle fingertip.,0
An employee was performing maintenance on a spinning machine when their left hand was pulled into the machine between the belt and pulley resulting in amputation of the left ring finger.,1
An employee was performing a 3-mile hike with a 45-pound pack during a wildland firefighter qualification test. The employee suffered symptoms of heat illness and dehydration.,1
"An employee was working inside a generator enclosure with two doors. The employee leaned on a door and it swung open, causing the employee to fall 4 feet, 6 inches to the ground below. The employee suffered broken ribs and was hospitalized.",1
"An employee fell while in a hallway and hit her face on a cabinet, resulting in a cut.",1
"An employee was up a cottonwood tree. When he cut a limb from the tree, it struck him and broke his left knee and lower leg.",1
"An employee was on a roof using a drill to install tin into the rafters. He dropped the drill and in trying to grab it he slipped on the wet tin. He slid down the tin and then fell 21 feet to the dirt ground, landing on his side. The employee sustained fractures to his neck, pelvis, and left wrist.",1
An employee was removing paper from a printing press when their right ring finger was caught in the press resulting in a partial amputation.,1
An employee was working at the pick shack when an object exploded and struck his abdomen resulting in a puncture wound.,1
An employee was exposed to bleach from wipes being used near her work space. She suffered an asthmatic flare and was hospitalized.,1
An employee was building scenery using a portable circular saw when his right hand contacted the rotating blade resulting in partial amputation of the thumb.,0
An employee was removing a jam of rubber strips in a slicing machine when the guillotine blade amputated their right middle fingertip. The machine was running and a guard was in place at the time.,0
"An employee was operating a brake press. A part was being pulled and a sheet metal part underneath came out with it and fell, striking the employee's foot/ankle. The employee sustained a laceration to the foot and ankle that required surgery.",1
"On June 10, 2022, an employee was moving an awning to the end of a box truck to unload it. The awning measured 16 feet by 15 inches by 12 inches and weighed 236 pounds. The employee was grabbing plastic nylon strapping in order to pull the awning when the strapping broke and he fell backward off the truck approximately 4 feet to the ground. He landed on his back and hit his head on the ground. The employee suffered an L2 compression fracture and a possible concussion that required hospitalization.",1
An employee was walking on the loading dock when a nail entered the sole of his shoe and punctured his foot. The employee sustained an infection and was hospitalized.,1
"An employee was using a forklift with a pallet basket to adjust the brace of a building. The basket fell off the forks of the forklift, causing the employee to fall from the forklift t 6-7 feet to the ground below. The employee suffered a skull fracture with brain bleeding, a broken right fibula, a broken left ankle, and a broken right elbow.",1
"An employee was walking along floor trusses above a building's second floor. He fell to the floor below, landing on his feet and then his tailbone. He suffered fractures to two back vertebrae.",1
"An employee was moving a package weighing about 70 pounds. The employee's finger was caught between the package and a cart, and the fingertip was amputated.",0
An employee was operating a table saw when the wood kicked back causing his left middle finger to contact the rotating blade. The employee sustained a fingertip amputation.,0
"The injured employee was helping to build a large differential (drive train for a vehicle) on a table. He was trying to fit the gears into the housing, then went to adjust a shim (washer) and asked a coworker to make an adjustment with a 3-pronged bar tool. The injured employee's right middle fingertip became caught inside the differential and was amputated.",0
"An employee was walking down a driveway when she fell to the ground, resulting in a broken right arm that required hospitalization.",1
An employee sustained a laceration to their right leg.,1
"On June 11, 2022, an employee was performing maintenance on a machine part that holds logs in place while a blade cuts them. The employee was holding up the machine part when it slipped and slammed down onto his right middle finger, resulting in a crush injury that required a surgical partial amputation.",1
"An employee was troubleshooting an electrical problem at a well site. The employee touched an electrical panel with an impact wrench when an electrical arc occurred, resulting in burns to the employee's right hand and forearm.",1
"An employee was throwing garbage in a dumpster. He lost consciousness and fell, suffering head trauma when his head struck rocks on the ground.",1
An employee was inflating a tire on a truck when the sidewall of the tire blew out. The employee sustained abrasions to the face from dirt and debris.,1
"While relocating a desk, an employee's right middle finger was crushed between the desk and the ground. The fingertip was amputated.",0
"An employee was walking while putting a clothing item on a hanger when she tripped over a customer's foot and fell to the floor on her left side, resulting in a fractured left femur.",1
A hose failed during the removal and replacing of a pump filter. Hot fluid from the hose burned the left side of an employee's body.,1
"While walking down steps, an employee twisted his ankle, then fell and hit his head. The employee was hospitalized with a concussion.",1
"An employee was cleaning fryers. When filtering the oil, residual water mixed with the oil, causing it to boil over. The employee was splashed and sustained burns to the left side of her face, left ear, and upper left arm.",1
"An employee was replacing an O-ring on an air valve. When putting the stem of the valve back in place, the connection between the air hose and valve got disconnected causing the stem to close on the employee's fingertip resulting in a partial amputation.",0
"An employee was assisting a co-worker in fitting a stand pipe into the mousehole of a drilling well. As a joint of the drill pipe was being lifted up, the employee placed his right hand around the drill pipe. The drill pipe moved unexpectedly, causing the employee's right middle finger to be caught between the pipe and the hydraulic power unit. The employee suffered a fingertip amputation above the first knuckle.",0
"Employees were moving flat metal material to the work location when a flat plate came unhooked, or the rigging came off, and the plate fell on an employee's right foot. The employee sustained a fractured foot.",1
"An employee was checking for an air leak on an injection molding machine. The machine actuated, causing amputation to the employee's left index finger.",1
"An employee was on a tray line serving food when he slipped, fell, and hit his head on the floor. The employee sustained an open wound to the head and had a seizure. The employee was hospitalized.",1
"An employee was attempting to remove insulation from a ventilation fan when their foot contacted the moving fan blade, resulting in an injury that required a medical amputation of the foot.",1
"An employee was moving a ride-on pallet jack when the pallet jack moved forward instead of in reverse, catching the employee between the pallet jack and the wall. The employee suffered a contusion and a laceration.",1
While walking an employee slipped on sand and fell on the tile floor. The employee sustained fractures to the pelvis and cheekbone.,1
An employee was working at a restaurant emptying a container of used cooking oil. His right hand slipped into the container and the hot cooking oil caused burns to the hand that required hospitalization.,1
An employee was in the back room completing closing tasks for the store when a delivery pulled up. The employee moved an electric pallet jack out of the way. The pallet jack rolled over his foot and fractured it.,1
An employee was bitten by a cat while treating the cat. Tetanus and rabies vaccines were administered and the employee experienced an allergic reaction to the vaccines.,1
An employee was riding an electric scooter when they fell to the ground and sustained a fractured hip.,1
"An employee was manually lifting cases of beer from a rolling cart and stacking them in a storage room. The employee felt ill, experienced chest pain, and then passed out and struck his head.",1
"On June 13, 2022, at 1:30 p.m., an employee was attempting to clear debris from inside a killer whale's mouth when the whale closed its mouth with the employee's right hand inside it. The employee suffered a right wrist fracture that required hospitalization.",1
"An employee was clearing a jam in a flat conveyor belt system when her right middle finger got caught in the conveyor, resulting in a broken finger.",1
A temporary employee was re-securing temporary hand rails that had been removed from the second floor balcony during work activities. He was using a cordless drill to install screws into the building structure when the railing gave way and he fell approximately 11 feet from the balcony to the ground. He landed on his feet and broke both heels.,1
"An employee was picking up trash when they fell through a hole in the first floor down to the basement below, resulting in fractures and a punctured lung that required hospitalization.",1
"An employee slipped on water on the floor and fell, sustaining a kidney injury.",1
While inspecting a carpet an employee fell and was caught between the carpet roll. The employee sustained a broken hip and other injuries.,1
An employee was servicing a rooftop HVAC unit when they began to feel ill and collapsed possibly due to the heat.,1
"An employee was servicing electrical equipment from a ladder when he lost balance and fell backward to the ground, striking his head. The employee sustained skull fractures and brain bleeding.",1
An employee had been unloading chemicals and sustained chemical burns.,1
"An employee was pulling on a heavy line with the assistance of a powered capstan, which was attached to a barge tow chain. The capstan suddenly pulled the line in, catching and crushing the employee's fingers and resulting in an amputation.",1
An employee was driving down an aisle when their powered industrial truck (PIT) drifted toward a column. The employee's left foot was caught between the PIT and column and fractured.,1
"A temporary employee was cleaning debris on a conveyor belt with his left hand when the belt caught his glove and pulled his index finger into the conveyor, resulting in an amputation.",0
"An employee had been making a repair on a roof. While descending a ladder from the rooftop to the ground, a gust of wind blew the employee off the ladder. The employee fell approximately 15 feet to the ground, landing on both feet and fracturing both ankles. The employee was hospitalized.",1
"An employee was stacking metal studs on a cart when a stud slipped and fell onto his left knee, resulting in a laceration that required surgery.",1
"An employee was cleaning an oven with a water hose when they began to experience symptoms of dehydration, as well as muscle and kidney injuries. The employee was hospitalized for heat exhaustion.",1
"The injured employee and a co-worker were carrying an elevator weight. The co-worker let go of their half and the weight fell onto the employee's right hand, resulting in a partial amputation of the right index finger that required hospitalization.",1
"An employee was walking to get a beverage for a client when she tripped and fell forward, breaking the fall with her arms. The employee suffered two broken wrists.",1
"An employee was using a manual pallet jack to unload a pallet of blow-in insulation from a truck at the dock. While moving the pallet jack over the lip where the dock meets the dock plate, the employee lost his footing, slipped and hit his head on the concrete ground resulting in a brain bleed. The employee was hospitalized.",1
"An employee was operating an injection molding machine that became clogged. While attempting to unclog the machine by removing the sprue, hot melted plastic came out onto the employee's hands and burned them.",1
An employee was stepping down from a step ladder when they lost their footing and fell resulting in a broken pelvis and hip.,1
"An employee was using a crane to load a die back onto a storage rack when a pin on the die caught another die on the rack causing a 3,500-pound die to fall onto the employee. The employee was hospitalized for a broken leg and arm.",1
"While driving a pallet jack, an employee's foot was wedged against a rack resulting in a swollen ankle.",1
"An employee had attached a new hammer to a machine that shaped and formed coils of steel. When the employee hit ""run"" to operate the machine, the hammer struck the employee on the right arm. The employee suffered a broken humerus that required surgery.",1
Two employees had been cleaning an above-ground storage tank and became ill due to exposure to heat and aniline. One employee was hospitalized.,1
"An employee was working from a 6-foot scaffold when they fell, resulting in a fractured ankle.",1
An employee tripped over a bathmat and fell on the floor. The employee sustained a spiral fracture to his right leg requiring hospitalization.,1
"On June 13, 2022, an employee was attempting to stop a saw blade when they suffered a fingertip amputation.",0
An employee was leaving a patient's house when a dog living in the house jumped on her and bit her left hand. She was hospitalized.,1
An employee was on a catwalk system installing a steel cable on an overhead crane by threading the cable through eyelets located on the crane's runway. The employee's right hand got trapped between an eyelet and the crane's catwalk handrail resulting in a laceration and a broken bone.,1
"An employee was running tubing in the hole on a jobsite. Tubing weighing approximately 120 pounds fell off the elevator and struck the employee causing a concussion, six cracked ribs, and a possible fractured shoulder.",1
An employee was bucking a tree branch when their arm contacted the chainsaw. The employee sustained an injury requiring stitches and hospitalization.,1
"An employee was checking an acid leak from a pump inside a containment area. When the employee stepped into the area, acid contacted his right foot, resulting in burns.",1
"On June 14, 2022, an employee was adjusting the height of the work table on the box strapper. The employee loosened the bolts on the carriage and had their left hand resting in the area beneath the unit. The table dropped, resulting in distal tip amputations to their middle and ring fingers.",0
A bucket truck ran over an employee's foot resulting in fractures to the foot requiring hospitalization.,1
"An employee was unloading pipe to place in a trench. A skid steer backed up and bumped the employee, causing him to lose balance and fall into the 3.5-foot deep trench. The employee sustained a fractured femur and hip.",1
"While working on wiring up equipment on the ground, an employee began to feel lightheaded and fatigued. The employee sat in shade with a fan and then moved to the AC in the truck to cool off. After cooling off, the employee attempted to return to work and became ill. In the evening, the employee was hospitalized with heat stroke and renal failure.",1
An employee had been attempting to load a 24-foot extension ladder onto a bucket truck. The employee collapsed at the construction trailer while asking for help loading the ladder. The employee sustained possible heat stroke.,1
"An employee was bitten by a spider, suffered an allergic reaction, and was hospitalized.",1
"An employee was using a forklift to place material on the third tier of a warehouse rack when the forklift struck a ceiling beam and the resulting force discharged the employee from the forklift. The forklift then tipped over onto the employee, pinning him until other employees could extricate him. The employee suffered blunt force trauma to the spine, dislocation of vertebrae, and incomplete paralysis of the torso and lower limbs.",1
"An employee was in a trench securing a piece of 6-inch sanitary pipe cleanout when a piece of asphalt broke off and struck his left leg, fracturing it.",1
"An employee was carrying tiles for a tile installation at a customer's pool deck. He tripped and fell into the customer's pool, suffering back and head injuries.",1
An employee was working in the pallet repair line when a pneumatic nail gun shot a nail into their right wrist. The employee was hospitalized and required surgery to remove the nail.,1
An employee was operating a grocery loader forklift. He got off the forklift to shovel ice from the ice storage box into a container to then transport the ice. He slipped on ice in the ice box resulting in a fractured right ankle.,1
"An employee was on a step ladder putting away supplies when they missed a step and fell to the floor, resulting in a fracture in their lower left leg.",1
"An employee was waiting to secure a load on a trailer. As the employee was starting to walk, they tripped and struck their left cheek on a cardboard cap. The result was a fracture to the left cheekbone requiring hospitalization.",1
Employees were watching a hot oil truck pump hot oil down the well. The vac truck driver was instructed to shut the vac truck valve off to bleed pressure. The hot oiler bled pressure off into the vac hose causing the hose to have too much pressure. The hose blew off and struck three employees. One employee was hospitalized for multiple fractures to their right leg.,1
An employee was on the ground using a hook to release the fifth wheel when the bar slipped and he fell to the ground. The employee fractured their femur and was hospitalized.,1
"On June 14, 2022, at approximately 6:07 AM, an employee was removing a billet that was stuck underneath the loader of the press machine. The employee's left hand was caught by the tray on the conveyor of the loader resulting in amputations to the little and ring fingers.",1
The injured employee was driving an empty forklift southbound in the warehouse tunnel. The injured employee's forklift drifted into the path of a forklift that was traveling north. The northbound forklift was pushing two empty tire racks. The left front tire of the injured employee's forklift contacted the corner of one of the tire racks then continued forward and contacted the frame and tire of the northbound forklift. This caused the injured employee's forklift to turn over onto its right side. The injured employee sustained multiple fractures to both hands and required surgical amputation of the right index and middle fingers.,1
An employee was installing a conveyor belt when their fingers were caught and lacerated by the conveyor belt.,1
"An employee was operating a press. A part was ejected from the die and struck the employee's upper left arm, breaking it.",1
"An employee was working in the backroom, processing merchandise from a truck, and experienced chest pain resulting in hospitalization.",1
"An employee had been servicing a roof-mounted HVAC unit. The employee then descended a fixed ladder to retrieve some work products. While climbing back up the ladder, the employee fell 12-15 feet to the concrete floor, sustaining a fractured leg and having epoxy splashed in their face. The employee was hospitalized.",1
An employee was using a saw blade that cuts grooves into wood and amputated four fingers on their left hand. The machine was not locked out at the time of the incident.,1
An employee was using a circular saw to cut 2 x 4s. The saw kicked and contacted the employee's right hand amputating the little finger and lacerating the ring and middle fingers.,0
An employee went up on a derrick to unchain the block. The tubing line came back in and pushed him. He fell 12 feet from a gird at a pulling unit on the derrick and landed on a metal plate on the back of the rig floor. The employee sustained broken ribs and a puncture wound to the throat.,1
"An employee was manually helping unload racks that were on a forklift after the strapping system for the racks had failed. As the employee moved one rack, another rack slipped and pinched his right middle finger, resulting in an amputation of approximately 1/2 inch of the fingertip.",1
"An employee was doing mold removal at a jobsite. He became light-headed due to dehydration and when he stood up, he struck his head on a hanging pipe resulting in an abrasion to the back of the head.",1
An employee was struck by a piece of steel causing him to fall 12 feet to the ground. The employee sustained injury to an arm requiring surgery.,1
An employee took a pipe from the back of a pile and another pipe rolled down and struck his back. He was hospitalized with a back injury.,1
"An employee was abrasive blasting the side of a vessel while on a scaffold when they lost their balance and the blaster contacted their right hand, resulting in an injury that required hospitalization.",1
An employee was driving a utility vehicle and another employee was a passenger. Both employees were ejected from the vehicle while taking a turn. The driver struck their head and was hospitalized with a head injury. The passenger was not hospitalized.,1
A temporary employee was cutting metal banding and steel products. The employee sustained a back injury.,1
"An employee was trying to move a patient's shoes under his treatment chair with her foot. She lost her balance and fell, suffering a broken left femur and hip.",1
"An employee was standing on a trailer to push a pallet onto foam so a forklift could pick it up. The employee stepped backward off the trailer when their leg fell between the drive tire and mud flap, resulting in a laceration to the knee and calf.",1
An employee fell three stories off of scaffolding resulting in a knee laceration.,1
"An employee was taping fiber cable against a pole. A truck was making a wide turn; its trailer caught the employee's pant leg, dragged him against the pole, and pinned him against it. He suffered fractures.",1
An employee had been assembling doors. The employee's finger became caught in a conveyor belt and the fingertip was amputated.,0
"An employee was working from an extension ladder, 6-8 feet above the muddy ground. The ladder fell backward and the employee landed on his back.",1
An employee fell from a tree while trimming it.,1
An employee was opening a fire exit door to check the weather when their little finger got caught in the door frame. Skin was removed from the distal phalanx.,1
An employee was operating a vertical mill when their glove became caught in the mill head and their left hand was pulled into the machine. The injured employee sustained a laceration/avulsion to the left hand.,1
An employee had been moving boxes of coin and or cash. The employee became ill and was hospitalized.,1
"An employee was securing material to a hydraulic vise on a band saw. The vise closed, pinching his left index finger and causing a partial amputation.",1
"An employee was using an overhead crane to move a 4,300-pound steel plate. The plate was being lowered to the burn table when it became unhooked and struck the employee. The employee was hospitalized for a fat lip, elbow laceration, bruises to the right side, and broken bones to the right leg and torso.",1
A driver had been delivering building supplies. He experienced heat related symptoms such as cramps in his hand and arms and pulled over to the side of the road. The driver may have lost consciousness.,1
"A temporary employee fell off the back of a garbage truck, suffering a broken leg. The employee was hospitalized.",1
An employee was setting up to do architectural foaming and fell from a ladder to the ground.,1
"An employee was replacing switches on 23-kilovolt circuits at an electrical substation. While trying to take measurements with a metallic tape measure, the employee was shocked and burned.",1
An employee was performing an EKG on a patient when she started experiencing chest pains. The employee was hospitalized with an asthma attack.,1
"An employee was operating a debarker when a chain slipped into the roll cage. The employee attempted to kick the chain back onto the sprocket when his right foot got caught in the sprocket and chain, resulting in amputations of the tips of the big toe and index toe.",1
An employee was helping to service an excavator. He opened the radiator cap to add coolant and was sprayed in the face by hot coolant resulting in burns across his face.,1
"An employee was working when they became ill and experienced symptoms of heat exhaustion, resulting in hospitalization due to dehydration and heat stress.",1
"After setting up equipment that deposits cake batter into a pan an employee was investigating why batter was overflowing in the pans. She moved a pan under the depositor to catch the batter. As she did this, the piston for the depositor engaged and pinched the tip of her right pinky finger in the opening where the batter is discharged, resulting in an amputation of the fingertip.",0
An employee was sorting laundry when they became overheated and were hospitalized for heat exhaustion.,1
An employee was using a drill press to widen the holes in a copper terminal cable end. The drill bit caught in the terminal metal and caught the employee's glove. The employee's hand made contact with the spinning dill bit resulting in a finger laceration that required medical amputation.,0
"On June 15, 2022, an employee sustained a heat related illness resulting in hospitalization. The employee had been running the excursion press for the press saw.",1
"An employee was working in a blow mold area. The employee was reaching into a blow molding machine to pull out a bottle when the machine's rotating parts struck the employee's hand, resulting in amputation of the hand.",1
An employee was cutting foam using a rolling cutting blade when it amputated her left middle fingertip.,0
An employee was making a repair on a piece of machinery when his finger became caught in a 4 slide machine. The fingertip was amputated.,1
"An employee was working from an 8-foot ladder, changing a belt on an air handler. The employee fell from the ladder and was found unconscious, with their leg tangled in equipment. The employee had suffered a traumatic brain injury.",1
"On June 15, 2022, an employee tripped and while walking with a box of jewelry. She landed on the floor and suffered a broken hip.",1
An employee tripped on a floor mat and fell to the floor landing on their back and side. The employee sustained a broken hip.,1
A temporary employee was cleaning a piece of equipment called a three roll mill. The fingertips of his left hand got caught and crushed between two rollers and were medically amputated.,1
"An employee slipped while walking across a roof during a roof-framing job. The employee fell to the ground about 30 feet below, suffering fractures to the leg and spine. The employee was hospitalized.",1
An employee had been rearranging tools on the third tier of a supported scaffold. As he was descending the scaffold he fell approximately 22 feet onto boards that were positioned on a concrete platform on the ground. The employee sustained back injuries and a broken toe.,1
An employee slipped and fell approximately 10 feet off a roof and landed on the ground below fracturing both ankles.,1
An employee was taking measurements while on an extension ladder. The employee fell approximately 10-12 feet to the ground in an elevator pit and sustained a ruptured spleen and broken orbital bone.,1
"An employee was cutting through vines with a chainsaw. The chainsaw became entangled in a vine and jerked back, striking and lacerating the employee's left forearm. The employee was hospitalized.",1
"An employee was pouring iron on a melt line when iron splashed off a mold, down his leg, and into his boot. The employee suffered burns and was hospitalized.",1
An employee was applying grease to an aircraft with a grease gun when grease was injected into his thumb. The employee was hospitalized and required surgery.,1
"An employee was wiping the inside of a ball valve with a rag. The actuator cycled and the ball closed, amputating the employee's left middle fingertip.",1
"An employee was struck by carts on a cart mule, which caught the employee against the wall of a building. The employee suffered a broken leg.",1
"An employee was climbing a ladder to access a second floor landing. He fell approximately 10 feet to the concrete floor below. He sustained a facial fracture, broken left arm, and a concussion. The employee was hospitalized.",1
"An employee slipped and fell on the tile in an office building's bathroom. He suffered injuries to the left hip, thigh, and knee and was hospitalized.",1
"An employee was working near a smelter blast furnace. The employee's foot contacted a semi-solid lead ingot, which burned the employee's left ankle.",1
"Employees were spraying fertilizer with a spraying machine. The machine went down a slope and rolled, trapping an employee beneath it. The employee suffered broken ribs and a collapsed lung.",1
An employee lit a cigarette lighter to check the volume of chemical in an ISO tank. The flame ignited the remaining vapors in the ISO tank causing a flash fire. The employee suffered second degree burns on the face and arms.,1
"An employee was on a roof repairing a belt on a food HVAC system hood. The employee tripped, fell from the roof, and suffered possible broken ribs and lacerations to the chest.",1
"An employee was loading helium tanks into a tractor trailer when the driver of the tractor trailer began to drive away. The employee fell out of the trailer onto the ground of the loading dock, resulting in a fractured ankle and foot.",1
An employee jumped off a powered pallet jack while it was moving and their foot was caught between the pallet jack and a wall barrier. The big toe on their right foot was amputated.,0
"An employee was using a multi-use type ladder to access the rooftop of a single-story single family residence to conduct a re-roofing cost estimate. The employee lost his balance/footing and fell 8 feet from the ladder to the ground below. The employee suffered rib fractures, a broken clavicle, and injuries to vertebrae.",1
Four employees were loading an air compressor in the back of a pickup truck when one employee's left index finger was caught by the air compressor and amputated just above the knuckle.,0
"An employee was attempting to fix something in a roll forming machine that produced roof panels. The jogging button on the machine was triggered and a metal roll moved forward, catching his left index finger between two rolls. The employee suffered an amputation of the finger pad.",0
An employee was walking into a building when they tripped and grabbed a construction stanchion that fell over causing the employee to fall on their left shoulder and elbow. The employee sustained three broken ribs.,1
"An employee was a passenger in a doorless cart. The cart swerved to avoid a vehicle and the employee was thrown out. He suffered abrasions to the left side of his face and his arms, two fractures in the neck, and a brain bleed.",1
Employees were standing by an agricultural tractor with a chemical applicator to see if the installed fan was working properly. The tractor's RPM shot up and the fan began to spin faster than normal causing the fan's protective casing to explode and shoot metal pieces towards two employees on the opposite side of the tractor. Pieces of metal impaled one employee in the abdomen resulting in hospitalization. The second employee sustained a chest laceration and was not hospitalized.,1
An employee slipped and fell.,1
"An employee was riding on a truck's tailgate to go pick up trash on a job site. While the vehicle was moving, a tire ring came from behind the cab of the truck and hit the back of her head, knocking her to the concrete ground. She was hospitalized with a head laceration.",1
"An employee lost consciousness while standing outside at a job site. The employee was hospitalized, suffering from heat-related dehydration.",1
"An employee unstrapped a load of machinery on a truck. The machinery had shifted in transit; it fell off the truck and struck the employee, who suffered a chest laceration and a contusion to the left hand and was hospitalized.",1
"At a customer's facility an employee was moving a soda fountain dispenser on a pallet to the back of their truck for loading. The employee fell off his truck and landed on the asphalt ground, sustaining a fractured hip and bruises.",1
"An employee was helping a forklift remove a guard structure pole from a pole trailer. As the forklift was picking up the pole from the pole trailer, its forks tilted back. The pole began rolling backwards, and a bolt on it caught the inside of the employee's left safety glove as it rolled, twisting his arm in the process. The employee's left arm was broken, and he was hospitalized.",1
Two employees were loosening a union. One of the employees was striking the union to loosen it when the ball valve broke off the pipe on the pressure side. The ball valve struck the employee's head and knocked him over. His head landed on a piece of piping.,1
"An employee was measuring a block on a pedal-operated upcut saw equipped with a 10 or 12 inch circular blade. As he was taking a measurement, the blade contacted his left hand, resulting in amputations of three fingers.",1
A postal carrier was on their delivery route and experienced heat exhaustion and dehydration. The employee was hospitalized.,1
An employee had been dragging and raking tree debris. The employee experienced symptoms of heat distress.,1
"An employee was trying to lift a jammed dock plate. The spring-loaded plate came down and struck the employee's fingertip, causing a partial amputation.",0
"An employee was using a carbon fiber pole to inspect a roof. The pole connected with electrical wires and the employee was shocked. The employee was hospitalized for burns to the arms, back, legs and feet.",1
An employee was reaching to grab a shovel that was leaning on the right rear side of a rubber-track skid steer when the track ran over his right foot.,1
An employee was making a delivery when they were struck by a pickup truck in the parking lot. The employee sustained fractured ribs and was hospitalized.,1
"On June 16, 2022, an employee was operating a standing forklift. He reached his left foot outward toward an adjacent wall to avoid a collision with a rack and his foot contacted the wall, resulting in injury to his ankle and foot.",1
"An employee tripped and fell, hitting her head on the floor. She was hospitalized.",1
Throughout the day an employee had been cutting right of way clearance for new electrical service. The employee became over-heated and was hospitalized with heat-related illness.,1
A safety guard was knocked off a wrapping machine. An employee tried to put the guard back and their glove was caught in a chain and sprocket. The tip of their right thumb was severed and required surgical amputation above the knuckle. The machine was running at the time of the incident.,0
"An employee was clearing a jam in a feeder when her hand became trapped by the metal feed bars, resulting in a forearm laceration that required surgery.",1
"An employee was using a tugger to move sunroof glass. The tugger drove through condensation water pooled on an aisle floor, went out of control, and struck a guardrail. The employee's right thigh struck the inside of the tugger.",1
An employee was working at the cashier station when a customer walked in and attacked the employee with a stick and then left. The employee sustained head/face trauma and a laceration.,1
A cat bit an employee's right hand and finger. The employee was hospitalized.,1
"An employee was investigating a power loss. While using a voltage meter, an arc flash occurred causing burns to the employee's hands, face, and hair.",1
"An employee was working to load a concrete barrier onto a flatbed trailer when his left foot was struck by the concrete barrier, resulting in a foot fracture. The employee was hospitalized for surgery.",1
An employee was climbing up a ladder on a tanker trailer to open the dome lid. He was 3 to 4 steps up when he fell backward off the ladder and landed on the ground. The employee was hospitalized with bleeding in the brain.,1
"A flagger was standing inside a lane closure, acting as a spotter between two automated flagger stations. When the water for a drill head was turned on, a stream sprayed out and startled a passing driver, whose vehicle veered into the lane closure. The vehicle's mirror knocked the employee over and its rear tire ran over her leg. She suffered a forehead laceration and a compound fracture to the lower left leg.",1
"An employee was at the rear of a trailer truck opening the rear door to unload product into the warehouse when a stack of 24 pallets in the truck fell on him knocking him onto the concrete lot. The employee suffered crush injuries resulting in damage to their bones and organs including a broken back, fractured ribs, broken legs, a punctured lung, and additional crush injuries that required surgery.",1
"A temporary employee was pushing a pallet jack. When she tried to kick a piece of broken wood hanging from the corner of a pallet, a nail pierced the bottom of her foot. She was hospitalized.",1
A temporary employee was cleaning a capping machine when their hand got caught in the mechanism and the top half of their little finger was amputated.,0
An employee was securing a backhoe to a trailer using ratchets. The employee's left index finger got stuck in the ratchet resulting in an open fracture.,1
"An employee was standing on the side of a flatbed trailer, trying to pull a tarp over the load on the trailer. The tarp was stuck, and as he pulled on it he slipped and fell off the trailer to the ground. He suffered broken ribs, a dislocated right shoulder and elbow, and internal bleeding in the head.",1
"While performing an hourly operational check, an employee noticed a blower was not running. The employee went into the equipment room, opened the motor control center (MCC) and reset the circuit breaker inside the MCC to restart the blower. An arc flash occurred, causing  burns to the left side of his face and ear, second degree burns to his left hand, and third degree burns to his left arm.",1
Two employees were setting up a multi-die header machine. The machine was turned on while one of the employees was adjusting a bolt inside it. The employee's right middle finger tip was crushed between the bolt and the machine's oscillator and had to be amputated. The incident took place during a training activity.,1
"After working on a transmission under a truck, an employee became ill. The employee stated to a coworker that he was not feeling well and moved into an air conditioned area. The employee then passed out and was transported to the hospital and treated for heat exhaustion.",1
"A firefighter was pulling an equipment tray from the side compartment of a fire truck. The tray came off its guide tracks and fell to the ground, amputating two fingertips on the firefighter's left hand in the process.",1
"An employee was adding hot water to the liquefier/emulsifier. The employee bent over to pick up an object on the ground. The liquefier/emulsifier over filled and spilled hot water and a non-stick chemical onto the employee burning his lower back, legs, and feet.",1
"An employee was making confined space entries to clean a tank when they began to experience symptoms of heat-related illness, cramps, and heat exhaustion. The employee was hospitalized.",1
"An employee was servicing a propane tank when the tank began venting excess propane and an ignition source caused a flash fire.  The employee sustained second degree burns to the face, arms, and legs.",1
"An employee had been removing tools from a one-story rooftop. As he was climbing down a ladder from the roof, a gutter gave way. The employee slipped and fell from the ladder to the ground. He sustained fractured metatarsals in both feet and lacerations on one hand.",1
"An employee had been brick layering and was dismantling a scaffold. An overhead crane was lifting a tower off the scaffold when the tower fell onto the employee, striking their head.",1
An employee was operating a rebar bending machine when his right middle finger became caught in the machine resulting in amputation.,0
"An employee was installing a piece of steel into a shear when the steel kicked up and pinched his left middle finger against the shear, amputating the fingertip.",1
An employee was making deliveries in a residential area when he felt ill due to dehydration. The employee was hospitalized.,1
"An employee was installing steel decking at the third-floor level. The employee fell through an opening in the decking, landing on the concrete floor at ground level and suffering broken left and right ankles, broken ribs, facial fractures, and two skull fractures.",1
"An employee tripped, fell, and broke their pelvis.",1
An employee was using a cutting torch to cut a curved metal tank plate. Pieces of the metal fell and hit his foot behind the steel toe and burned his left foot. He then lifted the piece with his left hand. The employee was hospitalized with a cut and third degree burns on the left foot and second degree burns to the left hand.,1
"An employee had been installing drywall on the fifth floor of a building. He was using an electric pallet stacker to move drywall. As he was reversing with the load, his right foot was caught between the pallet stacker and a column resulting in three fractured toes.",1
An employee was operating a drill press when the glove on their right hand got caught in the press and their hand was pulled in. The employee suffered an amputation of their right little finger.,0
A maintenance employee sustained heat exhaustion while working outside on an air conditioning unit.,1
"On June 17, 2022, at 3:28 PM, an employee was training another employee and adjusting the blade of the splitting saw when the saw started and amputated the employee's left ring fingertip.",0
"In the seed warehouse, an employee was cleaning seed off a catwalk while in a man-basket connected to a forklift. The employee fell approximately 25 feet from the basket to the ground and sustained broken bones.",1
"Employees were working on a three-story steel/concrete staircase, welding and bolting up, doing the metal decking. An employee was picking up a metal sheet when he slipped and fell from the middle staircase landing onto the landing below, a distance of approximately 12 feet. The employee sustained a back fracture and a head fracture. The employee was wearing a harness, but it was not connected at the time of the fall.",1
"An employee was taking photos of a thief's license plate when the thief drove his vehicle and struck the employee. The employee sustained a concussion, head wound, and fractured wrist.",1
"On June 17, 2022, an employee was offloading a turbine blade when their left middle finger was caught in a pinch point and amputated.",0
An employee came in from their delivery route feeling ill and was hospitalized and treated for dehydration.,1
"An employee was straightening the slide plate on a conveyor when her left index fingertip was pinched between a guide and the conveyor, resulting in amputation of the finger.",1
An employee was using a tail rope to guide a stand of drill pipe into the mousehole from the derrick board. The tail rope became caught in the single joint elevators and tangled around the employee's lower right leg resulting in fractures to the tibia and fibula.,1
"An employee was driving a truck transporting a roll-off container. The truck hit a bump, dislodging the roll-off container. The container then rolled backward off the truck, lifting the front end of the truck into the air. Once the container cleared the back of the truck, the front of the truck dropped back to the ground, injuring the employee's lower back.",1
"An employee was disassembling a testing site when the testing structure fell on him, resulting in fractures to the right ankle, right tibia, and left femur.",1
Through the morning hours an employee was operating a hydro-excavator to spot utilities. The employee later took a break under a tree and lost consciousness. The employee was hospitalized with heat exhaustion and dehydration.,1
"A two-person saw crew was constructing a fire line at a forest fire. One of them was using a chainsaw when it kicked back, striking the other one's right shin. It knocked aside his protective chaps and cut into the skin, muscle, and bone of the lower shin.",1
A maintenance employee was on the roof assisting with an air conditioning issue. The employee stepped backward and fell through a closed skylight and landed on the floor approximately 30 feet below. The employee sustained bruises.,1
The injured employee was working on the concrete block line. The line had stopped while maintenance was tracking the conveyor belt to center it on the rollers. The injured employee attempted to secure a guide to help final product onto the conveyor and his right hand became caught between the head pulley and was pulled down into the machine. His index and middle fingers were amputated.,0
"Two employees were unloading a flatbed trailer that contained steel gas pipes. Each pipe was 40 feet long and weighed 900 lbs. After the pipes were unstrapped, the first employee climbed onto the trailer and began removing the chocks that were keeping the pipes in position. The second employee was standing on the ground next to the trailer. After employee 1 removed the chocks that were holding the top pipes in place, one rolled free and fell onto employee 2, striking him in the chest and leg and causing a fractured femur, hip, and ankle.",1
An employee was bending a metal tube when his right middle finger got caught between the tube and the pressure die of the horn bending machine. The fingertip was amputated.,0
An employee was preparing to blast the inside of a compressed gas cylinder. His thumb was pinched between the inverter rack and cylinder.,1
"An employee was descending a ladder from the third floor to the second floor of a scaffolding structure. The employee slipped and fell off the ladder, hitting their stomach on a board and landing on the second floor. The employee sustained fractures to the face, collarbone, and ribs.",1
An employee was operating a brake. The employee's finger was caught in the brake and partially amputated.,0
An employee was unloading metal studs from a forklift when the stack of studs slid and the employee's right middle finger was caught in a metal knock-out. The employee attempted to pull his finger out and suffered a fingertip amputation.,0
"An employee was setting a stress jack into place, getting ready to stress the cable. His hand was around the ram and his thumb was in the cylinder channel against the back wall. The stressing operator started moving the ram cylinder into position and the cylinder crushed the tip of the employee's left thumb against the back wall.",1
An employee was standing on a wall setting trusses on the roof of a home. A gust of wind knocked the trusses over and the employee jumped to the ground to avoid being crushed by the trusses. The employee sustained a broken ankle.,1
Employees had been nippling up the blow out preventer (BOP) system. The work floor of the rig unfolded and descended on top of an employee resulting in contusions to multiple body parts.,1
An employee was performing their duties for a sanitation process. A machine amputated the employee's left middle fingertip.,0
"An employee was changing out a water pad near a furnace operating at 2,500 degrees Fahrenheit. He was wearing the maximum level of heat-protective equipment due to the proximity of the furnace. After changing the water pad and going to his locker to change, he developed muscle cramps. He was hospitalized, suffering from heat-related illness.",1
"On 6/18/2022, an employee had been driving a tow motor and putting finished products on the pallet wrapper machine when plastic wrap got jammed. The employee got off the tow motor and climbed onto the pallet wrapper to clear the jam. When he grabbed the wrap, his hand was pulled between the turntable and roller bed of the pallet wrapper. His hand was pinned/crushed causing broken bones in the right thumb and index finger. The machine was running at the time.",1
"An employee was trying to put a piece of solid metal tooling into a rack. As the employee was sliding the tooling onto a skid, it started to fall and pinched the employee's left middle finger against a forklift tine. The employee suffered a partial amputation to the fingertip, as well as fractures to two fingers.",0
An employee was showing a boat to a customer and slipped and fell and scraped his head. The employee was hospitalized with a head injury.,1
An employee was escorting two guests out of the park when they tried to run away. The employee attempted to catch them and fell to the ground landing on his left wrist. The employee was hospitalized with a fractured wrist that required surgery.,1
An employee was descending a ladder after nailing a curtain on a chicken house. The ladder became dislodged and both the ladder and the employee impacted the ground. The employee sustained a fractured and dislocated left shoulder and a fractured left rib.,1
"An employee was standing near a stationary skid-steer while training a contractor on some of the skid-steer's operational controls. The contractor was in the seat of the skid-steer when one of the operational controls moved, causing the forks of the skid-steer to slightly move and pinch the employee's hips, resulting in a dislocated pelvis in two places.",1
An employee was a passenger on a side-by-side buggy when the buggy flipped and landed on his legs. The employee's right leg and left foot were fractured.,1
An employee was inspecting the belt on the conveyor system of a binder machine when their fingers got caught under the drive belt and were run between the pulleys resulting in finger amputations.,1
"An employee was sheathing a roof of a two-story home when he stepped on a loose piece of plywood and slipped off the roof. The employee was wearing fall protection, but the rope was not adjusted and the employee hit the ground when he fell, resulting in a broken right ankle.",1
A person in the store used a gun to shoot an employee in the thigh. The employee was hospitalized.,1
An employee was using an Allen wrench to tighten a bolt when the wrench broke and a piece of it struck the employee's eye resulting in a ruptured globe.,1
An employee slipped and fell on the ground breaking their wrist. The employee was hospitalized and had surgery.,1
"Two employees were sliding a 1,000-pound mold onto the forks of a powered industrial truck (PIT). The mold shifted on the forks and an employee's middle finger was pinched between the mold and the forks. The fingertip was amputated.",0
"Two employees were team-lifting a reel bar to insert it into a new reel of wire. As the employees were walking toward the reel of wire, the injured employee tripped on a concrete parking bumper and fell onto the curb. As he fell, he released his grip on the reel bar and it landed on his left hand. The left middle fingertip was amputated.",0
An employee was walking toward the drum crushing area when a forklift made a right turn and pinned them against a safety bollard. The employee sustained a fractured right femur.,1
An employee was walking to a hallway to get some labels and slipped on water that was on the floor. The employee fell on her left side sustaining a fractured wrist and femur. The employee was hospitalized and required surgery.,1
"An employee was removing a filter from a box while standing on a 10-foot ladder. The box was stationary on the ladder cap. As the employee pulled the filter from the box, his right hand entered a ceiling fan. He suffered a broken hand and lacerations, with significant blood loss.",1
An employee was holding a metal beam. Another metal beam was moved and the employee's left thumb was fractured between the two beams.,1
"An employee was dipping a ladle into molten metal when the molten metal splashed onto the employee's right side causing burns to the neck, shoulder, forearm, hip, upper thigh, and foot.",1
"An employee was using a forklift to load bales of banded cardboard into the back of a 53-foot trailer. The employee finished loading a bale, tapped his horn, and begin to back out of the trailer. The truck pulled away from the loading dock and the forklift fell out of the back of the trailer. The employee was hospitalized with a fractured L2 vertebra.",1
An employee was climbing a 4-step ladder when they fell two steps to the ground.,1
"An employee stepped onto uneven ground and fell, injuring their knee.",1
A 120-pound piece of molded plastic fell from a molding machine and struck an employee's thumb. The employee was hospitalized with a thumb injury.,1
An employee was operating a table saw when its blade caught his left middle finger and partially amputated it.,1
An employee was delivering flowers to a customer's house. He tripped on a gap between the porch and the entrance to the house and suffered a broken hip.,1
"An employee was changing the belt on a concrete hopper. The employee attempted to relieve the pressure on the belt and pulley during the changeout when their right index finger got pinched by the pulley, resulting in a fingertip amputation.",0
An employee was troubleshooting an air handling unit to verify the direction of air flow. The employee began to manually advance the fan by pushing and pulling the drive belt when his right middle and ring fingers became caught in the belt and pulley. The employee sustained a partial amputation of the ring finger and a fractured middle finger.,1
"An employee was unloading pallets from a truck when their ring got caught on a pallet, which pulled them onto the lower level. The employee fell approximately 4 feet onto pallets, resulting in fractured ribs on their left side and a fractured left thumb.",1
"An employee was on a boom lift, hanging cables. A rope attached to the boom lift's cage got caught in the boom lift's wheels and pinched the employee's right middle finger against the cage. The fingertip was amputated.",0
An employee was connecting his personal fall arrest system (PFAS) lanyard to a horizontal lifeline positioned on a bridge beam when he fell approximately 8 feet to the rocks below. The employee was hospitalized with facial fractures and head trauma.,1
"An employee was changing a display on the wall while using a ladder. The ladder began to tip to the right and the employee ended up falling with the ladder to the concrete floor, landing primarily on the right side of her face. The employee sustained facial fractures, a concussion, and multiple contusions.",1
"An employee was assisting with a door delivery. While lifting the door, the employee injured his back.",1
"An employee was directing a co-worker to pick up a pallet with a forklift. The employee went into the operator's cab and assisted in moving the steering wheel. As the employee was exiting the cab area, the co-worker accidentally pressed on the gas, moving the forklift forward and pinning the employee between the forklift and a pole. The employee suffered a right upper thigh and hip injury.",1
"During construction activity, an employee lifted a tool, lost balance, and fell to the ground fracturing both ankles.",1
"An employee removed a rear valve from a new asphalt trailer. The employee determined that the trailer had a pinhole leak and went to diagnose and repair the issue. When the employee ignited a propane torch to help repair the issue, the vapors given off by the product ignited and an explosion occurred. The employee sustained first and second degree burns on the left side of the face, neck, and head.",1
While operating a powered pallet jack in reverse an employee's leg became caught between the pallet jack and a wall causing a crushing injury to his ankle.,1
"An employee was tightening bolts on a valve using a powered torque wrench when the wrench kicked back and hit the tip of their left little finger, resulting in a fingertip amputation.",0
An employee was changing a mold on a builder. The headstock activated and crushed his left index and middle fingers. The fingers were subsequently amputated.,0
"An employee had been operating outdoor landscaping equipment such as mowers and weed whackers. The employee was observed having trouble walking, and was feeling ill and disoriented. The employee was hospitalized for heat-related illness and dehydration.",1
"An employee was in the seat of a self-loading center-mount crane. He fell out of the operator's seat, striking the load and falling to the ground, unconscious. The employee sustained injuries to the head, neck, and back, along with broken ribs and severe bruising.",1
"An employee was hydrating in the break room after performing outside work. As the employee left the break room, he fell backward due to dehydration and hit his head, resulting in a concussion.",1
An employee was using a 10-inch circular saw to cut a 5-inch thick southern pine beam. The beam pinched and the saw kicked back lacerating the employee's right leg. The employee was hospitalized.,1
An employee worked all day doing construction work in elevated heat temperatures. Heat index values that day were between 82.1F and 111.1F. He started feeling nauseous and light headed at about 2:00 PM. He took a break and then continued with the rest of his shift. He clocked out at 4:30 PM and went home. He was later hospitalized and treated for dehydration.,1
An employee was using a knife to cut bands from a stack of lumber. When she cut the second band she lost balance and the knife cut her left arm directly below the elbow. She was hospitalized and had surgery.,1
"An employee was standing on a 12-foot ladder, pulling insulation. He fell from the ladder and suffered a back injury. He was hospitalized.",1
"An employee was changing a forklift battery. One of the hoist hooks came unhinged, causing the battery to fall and pinch the employee's index finger and amputated the fingertip.",1
"An employee was climbing down an extension ladder used for egress when the ladder slid out, causing the employee to fall to the concrete floor and break his lower right leg.",1
"A rig crew was preparing to push back the mud motor to set it down behind the rotary in order to install a bit breaker into the rotary. As an employee moved from a squatting position, his right foot slid underneath the mud motor and became caught between the mud motor and the rotary mat. The employee sustained fractures to the foot and two toes, as well as a laceration to the bottom of the foot.",1
"An employee was working from an 8-foot A-frame ladder, removing braces holding ductwork. As the employee removed a brace on one side, the brace on the other side failed and the ductwork swung down. It struck the ladder, which fell over. The employee fell with the ladder and suffered a broken wrist and upper arm.",1
Two employees were tying the off-site water line to the end-site water line when a truck came off the road and struck both employees. One employee was treated and released. The other employee was hospitalized for a fractured pelvis and possible internal bleeding.,1
An employee was walking up an airstair to enter an aircraft. The employee fell over an unprotected edge and suffered head trauma and a punctured lung.,1
The injured employee backed a counterweight truck up to a crane to unload and position crane mats and install counterweight. The crane raised its boom off the boom dolly and swung to the right to erect the swing away jib. Employees then hooked up the overhaul ball to the load line. The crane then boomed up and centered over the rear of the crane carrier. The brakes of the boom dolly released and the unit rolled forward pinching the injured employee against the rear of the crane. The injured employee sustained internal bleeding in their abdomen and an abdominal tear.,1
An employee had been working on a vehicle. He was unlocking the mechanism of the vehicle lift when the lift engaged; the hammer came down and struck the end of his right middle finger. The fingertip was amputated at the base of the nail.,0
"An employee was doing HVAC work in a crawlspace. A piece of ductwork, sticking down, lacerated an artery in his arm.",1
A truck driver was closing the rolling rear door of a truck when fingers on his left hand were caught and fractured in the door.,1
"An employee was changing drive tires on a semi-truck when a tire exploded. The employee sustained three fractured ribs, a collapsed lung, a laceration to the spleen, and a cut above the eye.",1
"An employee was cleaning product out of a hose/pump. Moving parts caught the employee's finger, causing a fingertip amputation.",0
"An employee and co-worker were taking out the outfeed roll from a non-energized planer used for spare parts. When lifting the pivot housing, the outfeed roll became bound up, so the co-worker pushed while the employee was trying guide the roll. The roll sprung out and rolled forward, smashing the employee's hand between the roll housing and the planer housing. The employee suffered a crushed index finger down to the third phalange.",1
"While on a scissor lift, an employee was cleaning an overhead fan. The employee tripped over the hose of a wet/dry vacuum and his right hand struck the running fan blade resulting in amputation of the middle fingertip. The fan was not guarded at the time of the incident.",0
An employee had been in and out of his office to check on production. He became ill and unresponsive due to possible heat stress.,1
An employee was taking a knife out of it's holder when it slipped out of his hand and amputated his left little fingertip.,0
An employee was changing out the coils of an intercept machine. The back plate had been placed onto the holding station. The employee went to adjust the back plate and it fell and broke their right big toe. The employee was hospitalized.,1
"Maintenance was being performed on a machine that inverts coal cars to dump product out of the cars. The machine was in the inverted position at the time. An employee was standing on fiberglass grating when it came loose causing them to fall 21 feet to the surface below. The employee sustained a broken arm. The employee was wearing fall protection, but it was not connected at the time of the fall.",1
An employee was moving a 9-foot daughter cart when his finger was crushed between the cart and a pole.,1
An employee was troubleshooting the mill hopper on the bread making line when his right index and middle fingertips were amputated by the metering vane and valve housing.,1
"An employee was inspecting the existing metal roofing system of a commercial property when the roof gave way and he fell approximately 20-25 feet to the floor in the warehouse space below. The employee sustained a head injury, kidney and liver lacerations, and fractures to the orbital bone, right wrist, pelvis, and ribs.",1
An employee was operating a truck's liftgate when the liftgate caused a crush injury to their left little finger.,1
"A mail carrier completed their mail delivery, returned to the office, and exhibited symptoms of heat related illnesses. The employee was hospitalized with heat exhaustion.",1
"An employee was operating a ride-on blower and was struck by a vehicle. The employee sustained injuries to the spleen, right hip/pelvis, right forearm, and left hand.",1
An employee was driving a long-life vehicle (LLV) delivering mail on a rural route. The employee became dehydrated and was hospitalized with heat exhaustion.,1
An employee was climbing down a steel ship ladder from the 12th floor to the 11th floor when he mis-stepped and fell to the floor. The employee sustained a sprain and strain to the right ankle and left shin.,1
"An employee was adjusting a pipe by hitting it with a hammer when his fingertip was struck by the hammer, resulting in an avulsion that led to an amputation.",0
"On June 21, 2022, at approximately 6:53 a.m., an employee fell from a two-step ladder while pushing boxes and gathering supplies. The employee was hospitalized with a fractured right knee and required surgery.",1
An employee was working on the ladder of a top stock cart loading merchandise. He missed a step on the ladder and fell to the floor hitting his nose and the front of his head/face. The employee was hospitalized with a brain bleed.,1
"An employee fell from a shelf to the ground, suffering fractures to her left shoulder and hip.",1
"An employee was installing a removable railing on a flatbed truck when his left ring finger was pinched between the railing and the bed of the truck, resulting in a fingertip amputation.",0
"An employee was on the roof of a house installing internet equipment when he fell to the ground, resulting in a back injury.",1
An employee was checking the blade of a carbon cutting machine. The blade dropped down and amputated the employee's right ring and little fingers.,1
"An employee had been putting lawnmowers out on the sidewalk. While pulling the security chain, he lost balance and fell, striking the back of his head on the floor. The employee sustained a concussion and head lacerations and was hospitalized.",1
An employee was operating a soil rolling machine when it slid down a grade and rolled over. The employee was pinned under the machine and sustained fractures to the pelvis and hip requiring hospitalization.,1
"An employee slipped on pipe-deburring chips and fell to the ground, suffering a broken right hip.",1
An employee was unjamming paper from a giblet wrapping machine when the rollers grabbed their right hand and amputated their middle fingertip.,0
"An employee was making repairs to a trailer ramp when the ramp shifted unexpectedly and pinched the employee's left ring finger, resulting in an injury that required hospitalization.",1
"An employee had been loading a generator on a flatbed truck. When the employee leaned on the tailgate, it opened, and he fell to the ground. The employee sustained a fractured neck.",1
"An employee was moving a rolling rack to get product. A case of soda product fell from the top shelf of the rolling rack and struck the employee's head. The employee became ill, lost consciousness, and sustained a contusion on the head.",1
"An employee was using a 21-inch lawnmower. A piece of metal got stuck in the mower; while he was bending to pick it up, the mower blades pulled in his glove and amputated his right finger to the bottom of the fingernail.",0
An employee working as a construction site flagger was hit by a reversing dump truck. The employee was hospitalized with injuries to multiple body parts.,1
"An employee was placing plates in a press machine. The employee had one hand on a button and another hand pressing the wood. As the employee attempted to push the button, his left ring and middle fingers were caught between the press machine rollers, resulting in crushed fingers and two fingertip amputations.",0
"Employees were relocating a blow molding machine at a client site. The machine tipped over and pinned an employee, causing a hernia and a laceration on the right side of their abdomen.",1
"An employee was performing a repair on a fire rescue vehicle. He slipped, fell off the vehicle's sideboard, and landed on his head and back on the concrete floor.",1
"In a lobby, an employee tripped on a circular display wall holding rocks and flowers. He stumbled forward into the rocks and flowers. The employee suffered a head laceration requiring stitches, as well as a neck fracture. He was hospitalized.",1
An employee was cleaning a pressurized paint sprayer nozzle when his right thumb was injected by the spray.,1
"An employee was working in the paint wastewater chemical storage room, positioning a chemical tote on a pallet. The tote shifted and caught his right middle fingertip against the pallet. The fingertip was amputated.",0
"An employee was on a ladder in a customer's home trying to bring down a TV from a ceiling mount. On the way down with the TV, he lost balance and the ladder fell out from under him and he landed on top of it. The employee sustained an injured rib and a punctured lung.",1
Employees were operating a device that assembles trusses. An employee's right ring finger became caught and was crushed in the assembly device.,1
"An employee was riding on the back of a golf cart. He jumped off the cart and fell, his head striking the asphalt ground. He suffered a head injury.",1
"An employee was depressurizing an isolated section of piping in preparation to service a CO2 injection well meter. The 1/2-inch meter assembly piping parted and struck the employee, fracturing their right humerus.",1
"An employee was climbing a fixed ladder from a barge to a dock when they slipped and fell approximately 10 feet to the deck of the barge, resulting in two broken bones in their back and a punctured lung.",1
"An employee was connecting a cart to a tractor when the latch got stuck and the tongue fell forward, crushing the employee's left middle finger, which resulted in a fingertip amputation.",0
"An employee was evaluating a residential home when they fell through an unprotected floor opening to a crawl space below, resulting in fractured ribs.",1
A stand-up forklift operator was backing up when his forklift struck another forklift that was also backing up. He was hospitalized with fractured feet.,1
"An employee was using a stand-up forklift to move pallets in a warehouse. As he was backing up the lift, it made contact with a pallet that had a splintered piece of wood, which punctured his left calf. He was hospitalized.",1
An employee fell from a roof while reaching for a tool. The employee landed on the ground and suffered a back injury.,1
An employee was cleaning his apron at the end of his shift in the trolley room when the apron fell to the floor. The employee stepped on the apron and slipped and fell to the floor resulting in a broken hip.,1
An employee was unloading a pot from an autoclave. The employee tripped on one of the locking devices at the base of the autoclave opening and fell. He sustained a hip injury and was hospitalized.,1
"An employee was installing a tire on the rim of a garden tractor. While the employee was putting air in the tire, it slipped over the back of the rim, hit the employee's right forearm and broke it, and cut the employee's left knee.",1
"An employee was doing maintenance work on a pump. The employee locked out the pump, vented it, and checked the fill plug for pressure. When he then removed the fill plug, hot water was released and burned his left arm, the front of his neck, and a spot on his left hip.",1
"An employee used a 12-foot A-frame ladder to access a roof to conduct observations on how a work crew were going to demolish a window. After completing the observations, she was descending the ladder and lost balance and fell face down, striking her head on the concrete floor. The employee sustained internal head bleeding and bruising to the right side of the body.",1
"An employee was dragging a heavy box when she tripped and fell backward, landing on the floor.",1
"An RGA Concrete Contractors employee was removing parts of scaffolding. Above him, the top parts of the scaffolding were being removed by another employee working from a scissor lift. A safety cable had become caught on the scissor lift and was under tension. When that tension released, the cable struck the employee across the torso. His liver was injured and he was hospitalized.",1
"An employee was assembling roof trusses. As they were exiting an aisle, they were pinned between a moving glider press and a stationary table, resulting in crush injuries to the abdomen and upper leg that required hospitalization.",1
An employee was operating a ride-on powered pallet jack. The pallet jack struck a barrier during a turn; the employee fell off and their head struck the concrete floor. The employee suffered a head injury and was hospitalized.,1
"At 9:00 a.m. on June 22, 2022, a unit of plywood was being lifted with a crane. The rigging or strapping failed and the plywood fell from the platform. An employee was pouring a sidewalk on the opposite side of the building when one of the pieces of plywood hit him in the back of the head. He suffered a brain bleed, a skull fracture, and broken vertebrae in the back and neck.",1
An employee was picking product in an aerial lift. A forklift bumped into the lift and the employee fell 12 to 15 feet to the concrete floor. The employee suffered an ankle fracture and was hospitalized.,1
"An employee slipped on a puddle of hand sanitizer, fell on the floor, and suffered a broken right hip.",1
"On 6/22/2022, an employee was placing a shirt on a heat transfer machine when the heat plate came down on her hands resulting in burns to both thumbs.",1
"An employee was moving a rolling dumpster when it went out of control. As he tried to stop it, his right little finger was caught between the rear of the can and a rolling wheel. The finger was amputated.",1
An employee's fingertips were amputated while he was cleaning the rollers on a press machine.,1
"As part of routine maintenance, an employee was holding hydraulic equipment in place when a pump pipe dropped, pinching the employee's left index fingertip against the hydraulic equipment. The fingertip was amputated and the employee was hospitalized.",1
An employee conducting metal pouring work was hospitalized due to heat exhaustion.,1
"An employee was working to clear a board that was stuck in a planer. He was on the conveyor when the planer turned on and his left foot got caught in the rollers, which pulled his left leg into the machine. The employee's leg was crushed.",1
"On June 22, 2022, at 10:00 a.m., an employee was using a wheelbarrow to transport materials on the second floor when he stepped onto a partially covered floor opening and fell through to the first floor, resulting in a hairline fracture to his right arm.",1
"An employee had finished installing a solar panel system at a residence. He removed the anchors from the roof and threw the rope to the ground. The force exerted caused the employee to lose their balance and slip on the roof. They rolled down the peak of the roof and fell roughly 20 feet to the ground. The employee sustained a concussion, C5/C6 disc herniation, and cervical neck strain.",1
The injured employee was walking backward out of the office when they tripped over another employee's foot and fell to the ground. The injured employee sustained a fractured left ankle.,1
"An employee was found unconscious on the concrete floor between a scissor lift and a manlift, having suffered a head injury.",1
"On 6/22/2022, a temporary employee was unjamming a meat slicer when the blade amputated their left middle fingertip. The slicer was energized at the time.",1
"At about 1:00 a.m., on June 23, 2022, an employee's right index finger was caught in a shredder. The finger was amputated at the second knuckle.",0
"An employee was on top of a ladder, switching out a light fixture, when an electrical shock caused them to fall. The employee landed on the concrete ground and suffered fractures to the left wrist and pelvis.",1
"On June 23, 2022, at 1:26 p.m., an employee working in a store tripped over a fan or the fan cord and fell to the floor, resulting in fractured ribs that required hospitalization.",1
"An employee was removing a rope from a fallen tree. A tree stub rolled into the employee from about 8 feet away, striking him in the ribcage area. He suffered a collapsed lung and was hospitalized.",0
"An employee was stacking soda cases when she bumped a fire extinguisher, which fell onto her foot. The employee suffered a toe amputation.",1
An employee was putting together two pieces of steel using a sheet metal joining machine. His right thumb slipped and was pinched as he lowered the die set. The thumb tip was amputated.,0
"An employee was getting labels off a shelf. They went to pull a fiber from a revolving conveyor roller. The roller pulled the fiber taut, causing the fiber to amputate the employee's left thumb pad.",0
"Two employees were moving steel tubes from a storage area to a slab. The load shifted and one employee's hands were caught between the tubes, which crushed the middle and ring fingers on both hands.",1
"An employee was helping install a pin to secure a hydraulic cylinder to the frame of a truck. A support holding the truck's tailgate open fell, and the tailgate closed on the employee. The employee suffered broken ribs and a punctured lung.",1
"An employee was using a pneumatic nail gun. A nail or other flying object struck the employee's eye, causing a serious injury.",1
An employee was unloading pallets and empty wooden crates from a truck using a forklift and a portable ramp when the forklift hit the inside of the ramp wall at the entrance to the ramp. The forklift tipped over and the employee suffered an injury to their right knee and calf. The employee was hospitalized.,1
"An employee was carrying a large window when it fell, breaking the employee's foot. The employee was hospitalized.",1
"Two employees were unloading a walk-behind concrete saw from a trailer in a parking lot. A telescopic handler with forks was being used to carry the saw, suspended with a lifting strap. One of the employees was walking in front of/beside the telehandler, holding on to the handle to keep the saw from swinging. As they maneuvered onto a concrete pad, the wheel of the telehandler ran into and pinned that employee's right leg, knocking them over. The employee suffered a leg/foot injury that resulted in a muscular injury.",1
"An employee was painting equipment when they began to experience fatigue as well as lower neck and upper back pain, resulting in hospitalization due to dehydration and low blood pressure.",1
"An employee was trimming a hedge with a powered hedge trimmer. The trimmer became stuck in the hedge. While the employee was trying to remove it, its shears lacerated the employee's right hand across the palm and amputated the last quarter inch of the little finger.",0
"An employee was cutting a fuel tank with a plasma welder when an explosion occurred, resulting in cuts and fractures to the face and head and a concussion.",1
Eleven employees became ill after exposure to carbon monoxide from propane-powered equipment that was being used for construction inside a building. One employee was hospitalized.,1
"An employee fell from a bucket truck, landing on the ground and suffering a hematoma in the pelvic area. The incident took place during a training activity.",1
An employee was helping to clean a skid steer-mounted auger. A pin in the auger caught his trouser leg and pulled him in. He suffered a broken right leg.,1
"An employee was loading mail into the back of a truck when another truck backed up and pinned the employee between the two vehicles' bumpers, resulting in lacerations and a broken femur.",1
"An employee was preparing to weld sections of a barge. While using a hydraulic tool to close the gap between sections of the barge, the employee struck the steel with a hammer. The hydraulic tool was under pressure and slipped, striking the employee in the chin, mouth, and teeth. The employee suffered a broken jaw and teeth.",1
An employee was operating a punch press. The press crushed the employee's finger which had to be medically amputated.,0
"On June 23, 2022, at 10:00 a.m., an employee and co-workers were mowing grass at a solar panel site when the employee's riding mower got stuck. The employee connected the mower-mounted winch to a post to free the mower. When the employee engaged the winch, the cable wrapped around his thumb and was pulled taut, resulting in an amputation of the employee's left thumb at the first knuckle below the fingertip.",1
An employee was moving concrete debris at a job site when they felt pain in their abdomen from a hernia.,1
An employee was test-riding a scooter when it struck a fire hydrant. The employee suffered a left knee injury that required surgery.,1
"A crew was installing a water line in a trench that was 5' 3"" deep when a trench wall caved in and pinned an employee, burying him in approximately one cubic yard of dirt. He was hospitalized for broken ribs. Cave-in protection was not used at the time.",1
"On June 23, 2022, an employee was sitting on the back of a small aerial lift while it was moving slowly toward the back of a trailer. The rubber track caught his right ankle, causing a fracture above the ankle. He was hospitalized.",1
"An employee and co-worker were working from an operator's basket of a rough terrain forklift to install plywood sheathing on the exterior of the second floor of a townhouse. The employee fell out of the basket approximately 10 feet to the ground and then tumbled down the sloped side of the ground about another 9 feet, resulting in a broken ankle that required hospitalization and surgery. Fall protection was not worn at the time of the incident.",1
"An employee was using a utility knife to cut a cardboard poly roll to length. The blade got stuck in the cardboard roll and contacted the employee's left hand, resulting in a partial amputation of the index fingertip.",0
"An employee was securing a well cap when it slid off the side of the sub-base, pinning his right leg against the sub-base and breaking his femur.",1
"An employee was holding a chain attached to a radiator, being carried by a reach forklift. The forklift contacted a live-voltage structure and the employee was shocked, suffering burns to the arms, chest, back, and face. The employee was hospitalized.",1
"An employee was pulling products using a pallet jack. A pallet slipped, fell about 15 feet, and struck the employee. The employee suffered a neck injury.",1
"An employee was wiring an electrical sign from a ladder. The employee was shocked and fell off the third rung of the ladder, suffering a broken ankle and injuring his knee. He was hospitalized.",1
An employee was working in the heat with concrete forms when they began to feel lightheaded and dizzy. The employee was hospitalized for heat illness and dehydration.,1
An employee was installing an I-beam vertically in a doorway to close up flat storage. The I-beam began to fall and the employee held onto it so it wouldn't hit another employee. His left index finger was pinched between the beam and a skid steer amputating the fingertip.,0
"An employee was working on a roof. The employee slipped and fell from the roof to the ground, suffering broken arms and ribs.",1
"On June 24, 2022, an employee was working from the ground, using a remote-controlled crane to position drywall next to a newly built home's entrance. The load of drywall hit the house and then his left leg, breaking his shin. He was hospitalized.",1
"An employee was using a rubber strainer when their right glove got caught in the strainer, pulling their hand into the strainer and resulting in amputation of the hand.",0
"An employee opened the straps of a packed crate containing slabs of tempered glass when the glass shifted and fell on him, resulting in a fractured foot and a laceration on his right hand that required surgery.",1
"An employee was driving a forklift through a warehouse aisle. The forklift steered into a metal rack, pinning his right foot against the rack. He was hospitalized.",1
"An employee slipped and fell on a wet hallway floor, suffering a broken left kneecap.",1
"An employee fell from a step stool and grabbed a porcelain sink, which broke. The broken porcelain lacerated the skin and tendons of the employee's left ring and little fingers.",1
"An employee was walking through the hallway when she slipped on a wet floor and fell, resulting in a broken hip.",1
"An employee was putting trash into a dumpster. The lid fell onto the employee's left hand, resulting in a partial amputation to the middle finger.",0
"An employee was moving an 80-gallon water heater using a hand truck when the heater fell on his right leg, resulting in a leg fracture that required hospitalization.",1
"An employee was unloading equipment from a flatbed trailer. The truck pulled away from the loading dock and the equipment fell, breaking the employee's left leg.",1
"An employee fell 4 to 6 feet while climbing a utility pole during a training activity. The force of the employee's fall restraint equipment applied pressure to the employee's abdomen where the climbing body belt was positioned, injuring an artery.",1
"At about 8:30 a.m. on June 24, 2022, an employee was on the roof of a box truck trailer in a parking lot. The employee's pant leg caught on the track of the ladder the employee had used to reach the trailer roof, and the employee fell to the concrete ground below. The employee suffered broken neck vertebrae and head trauma and was hospitalized.",1
"An employee was welding a bed plate (an L shaped attachment) to lift a steel I-beam from the floor onto several horses approximately 36"" high. The I-beam, with the bed plate attachment, weighed approximately 1,500 lbs. The employee was using a remote operated overhead bridge crane to maneuver the beam. A single chain from the overhead trolley was used to lift the I-beam and at the end of the chain was a steel J hook. A one-ton clamp was hooked on the J hook. The clamp was then affixed to the bed plate of the I-beam. As the beam was lifted, the employee was using his left hand to guide the beam when the beam slipped from the clamp and fell approximately three feet to the ground. The employee's left hand was caught under the beam and the left index, middle, and ring fingers were amputated.",1
A machine operator was cutting metal coils. He had reached in to fix an issue and was pulling a piece back when his right middle and ring fingers were crushed between the side wall and the disc separator. Both fingertips were amputated.,1
A truck struck an employee's head as it backed up. The employee suffered a deep puncture wound to the head and was hospitalized.,1
"An employee was winding envelopes into a take-up bobbin. The machine caught the employee's right hand and forearm, tearing muscles and tendons and breaking bones from the hand up to the forearm. He was hospitalized, and his hand was medically amputated up to the forearm.",1
"An employee was climbing a scaffold. When he grabbed two guardrails at the end of the scaffold, they collapsed and he fell to the ground 12 feet 6 inches below. His left elbow and both wrists were broken.",1
"An employee was waterproofing a wall in a parking garage. The employee fell through a covered manhole, landed about 12 feet below, and suffered a skull fracture. The employee was hospitalized.",1
"An employee was working at a pallet-nailing machine. As he tried to unstick a pallet stringer that would not feed through, the machine was reversed and the board moved backward. The employee's right middle finger was caught between the board and a machine cover, and the fingertip was amputated.",1
"An employee was disoriented on arriving home after doing delivery work. He was hospitalized, having suffered a heat-related muscle injury.",1
An employee was rewinding the fuel line to the spool on the fuel truck after refueling an aircraft. The chain came off the sprocket when the employee tried to replace the chain. As he jogged the gear so the chain would go back onto the sprocket his finger was caught and amputated.,1
"An employee was power washing equipment when they slipped and fell 36 inches to the ground, resulting in a leg fracture.",1
"A gas-powered generator caught fire in the back of a truck. An employee reached onto the trailer to remove the generator, and the generator tipped and created a fireball. The employee suffered second- and third-degree burns to both hands, both arms, and the backs of his legs.",1
An employee was using a table saw to create blocking for cutting when the wood kicked and the employee suffered a finger amputation and a cut on another finger.,1
"An employee was working in the fabrication area of a vibratory sifter/dryer when they noticed the access door was not on the machine. As the employee bent down, moving parts on the machine contacted his right hand, resulting in broken ring, middle, and index fingers.",1
An employee developed a heat-related illness while delivering mail on a 90-plus-degree day. The employee was hospitalized.,1
An employee was climbing a ladder to access a crane. The ladder slipped and the crane moved; the employee's wrist and forearm were caught and crushed between the crane and its frame.,1
"An employee was pushing a small double-decker grocery cart. She turned away from the cart and her right toe was caught in it, causing her to twist her right knee and fall to the ground. Her knee was injured.",1
"An employee was pushing a rack along an elevated rail. The rack fell and struck the employee's foot, possibly breaking it.",1
"An employee was shot in the abdomen during a robbery at an assigned work location, resulting in hospitalization.",1
An aerial forklift was being used to move a steel beam from a horizontal position to a vertical one. The beam fell over and struck an employee's left arm as he tried to stop it. His forearm was broken.,1
"An employee was working on the brakes of a bicycle. As he spun the bicycle's wheel, the disk brake amputated the flesh from his fingertip.",0
An employee was struck by sheet metal that slid off a forklift. The employee suffered a broken hip and jaw.,1
An employee was changing a belt on a machine. The employee's left index and middle fingers were caught in the chain and sprocket and amputated.,0
"An employee was using a lift gate to load medical waste containers into the cargo area of a box truck. He fell approximately 4 feet to the pavement, suffering a closed fracture to a lower-back vertebra and a head injury.",1
"An employee was putting a pillow on a bed. While turning, the employee slipped on the wet floor, then fell to the floor and suffered a broken right hip.",1
"An employee was about to unload frac sand at a well site. The power takeoff was engaged and caused the pneumatic trailer to pressurize. When the employee tried to remove a metal cap on the discharge hose, it blew off and struck him below his left knee. He suffered a laceration and a broken tibia.",1
"An employee was chasing a groundhog with a shovel. The employee stepped into a depression in the ground, fell, and suffered a broken lower left leg.",1
"An employee was doing maintenance work from a ladder. The employee fell from the ladder, landing about 9 feet below and suffering an injury that caused bleeding from the head and the inability to move.",1
"An employee was unloading a trailer using an electric walkie pallet jack when his right index finger was caught between the jack handle and a stack of pallets, resulting in a partial amputation.",1
"An employee was working in a barge, setting up plates. As the plates were being adjusted, they hit the employee in the wrist and back, breaking the wrist and bruising the employee's ribs. The employee was hospitalized for surgery.",1
"An employee was loading a dump body onto a truck. The clamp holding the dump body crushed the employee's finger, resulting in an amputation.",0
A temporary employee developed pain and cramps due to dehydration. He was hospitalized.,1
"An employee was crossing a walkway when a tree limb (from a tree that was being trimmed overhead) fell and struck the employee's head, cutting it. The employee was hospitalized.",1
"An employee was using a meat slicer to cut turkey. As he was guiding the meat into the slicer, his right hand slipped off the turkey and the blade amputated part of his right index fingertip.",0
"An employee was operating a forklift when the top corner of its radiator blew off. Hot radiator fluid sprayed onto the employee, who suffered burns to the left leg and hip.",1
"An employee and co-workers were taking a break under a tree when the employee was run over by the front-left tire of a pickup truck, which contacted the employee's midsection, resulting in four rib fractures, three spinal fractures, and lacerations to their spleen and liver.",1
"An employee was attending a pipe jack station where the edges of pipes are straightened with a mold and die. The employee was lowering and moving in a pipe when the die of the pipe jack hit the pipe, fell off, and hit the employee's left hand. The employee's left ring finger was crushed between the pipe and die, resulting in an amputation to the first knuckle.",0
"An employee was adjusting metal stock in a hydraulic press. The press was activated and its cutting blade came down on the employee's arm, breaking bones and causing ligament and artery damage that required surgery.",1
"An employee was trying to retrieve a dropped paper towel from a chocolate mixing machine. An agitator grabbed her glove, and the mixing blades amputated the tip of her right index finger.",0
"On Jun 27, 2022, an employee was disconnecting an electromagnet from a crane when an arc flash caused third-degree burns to the employee's hand.",1
"An employee was using a table saw to cut angles on a board measuring 2 inches by 6 inches. The board kicked back into the employee and as he braced himself the saw blade contacted his right hand, resulting in a lacerated hand and fingers.",1
An employee suffered a back injury while adjusting a stand-up desk.,1
An employee was pushing empty delivery product carts from the back of a trailer onto the dock when one of the carts fell onto another employee's foot. The injured employee's left foot was fractured.,1
An employee was operating a seal presser when they suffered lacerations to multiple fingers on their left hand.,1
"An employee was driving a reach truck. As he backed up, the truck hit a pallet and pushed it into a building column. The pallet broke and a board from it hit the employee's left ankle, breaking it. The employee was hospitalized.",1
"Employees were removing the bottom glue catch pan from a machine. The pan came loose from its supporting structure and fell. As he tried to catch it, it pinched an employee's hand against the metal catwalk. He suffered an amputation to the right index fingertip.",0
An employee suffered a back strain/sprain while removing a 55-pound coil from a winder. The employee was hospitalized.,1
"An employee was walking when the sole of their shoe stuck to the floor. The employee slipped out of their shoe and fell to the floor, resulting in a broken hip that required surgery.",1
"On 06/27/2022, at approximately 9:30 a.m. four employees were placing a hangar door into place in the opening of the existing hangar structure using a crane and a forklift. The door is assembled on site and placed in the opening of the structure, lying flat on the interior side of the door with the exterior side facing up. The door is placed approximately half-way into the opening. Once at the required height, two welders (one at each end of the door) will weld steel angle iron clips to the existing hangar support columns just below the pivot shoes on the ends of the door. After the door was rigged, hoisted, and lifted into place, welds were partially installed. The crane operator then began to cable down, lowering the exterior bottom edge of the door. The tack welds on the side of the door failed and the door fell to the ground landing on the injured employee.",1
An employee was using a lawnmower to cut grass near a ditch. The lawnmower overturned and amputated two of the employee's fingers when he tried to catch himself.,1
An employee was resetting a flywheel on a rivet machine. The flywheel caught her right little finger and amputated the tip.,0
An employee was using a table dado saw to cut lumber. The saw blade amputated the employee's right index fingertip at the cuticle.,0
"At 10:00 a.m. on June 27, 2022, an employee was unjamming a case from a juice line at a merge location. When he pulled some netting down, his right ring finger was caught in the conveyor pulley and partially amputated.",0
"A temporary employee was operating an electric pallet jack in a warehouse cooler. The pallet jack suddenly stopped and the employee was thrown to the ground, suffering a broken hip.",1
"An employee was operating a forklift. As the forklift reversed, it struck a boat; the employee's wrist was crushed and broken between the forklift and the boat.",1
"On June 27, 2022, an employee was cutting a 4-inch strip of metal on a shear machine. As he was lining up the metal the shear amputated the tip of his right thumb.",1
"An employee was mowing a pipeline right-of-way with a tractor. As the tractor crossed a water bar on a 30 percent grade, its seatbelt's locking mechanism snapped and the employee was ejected from the cab. He struck the ground and suffered a broken jaw and a broken rib.",1
"A temporary employee was pulling a pallet jack with truck parts. He suffered a pinched nerve, which caused pain and numbness in his neck and back, and was hospitalized.",1
An employee was lifting a bundle of rebar from a flatbed truck. The bundle rotated and knocked the employee off the truck. The employee landed on the ground and suffered an injury to the left trapezius muscle.,1
Three employees were preparing to unload a railcar. The railcar's sliding door had been opened and injured employee was outside the railcar making connections for the dock plate when a 400-pound cheese barrel fell through the railcar's sliding door opening and struck the employee. The employee suffered a broken left leg and was hospitalized.,1
"On June 28, 2022, an employee fell while climbing down a ladder, landed on the concrete floor 4 to 6 feet below, and suffered a broken leg. The employee was hospitalized.",1
An employee was assisting with moving a metal beam when the beam slid out of one hand and amputated his right ring fingertip as he attempted to catch it.,1
"An employee was cutting oxtails. As he was removing a piece of meat/fat from around the blade, the blade amputated his left middle finger.",1
"An employee tripped on the curled edge of a chair mat, fell, and suffered a broken left femur. She was hospitalized.",1
"An employee was standing on a 7-foot ladder while removing part of an A/C duct system during demolition. The entire duct system fell on top of the employee, knocking him off the ladder onto the ground and resulting in a concussion and two fractured wrists.",1
An employee was accessing a junction box when he fell from a 6-foot ladder to the ground and broke his leg.,1
"An employee was in a freezer cleaning pipes using a bleach cleaner. He became light-headed, left the freezer, and then slipped and fell in the room outside the freezer. He was hospitalized, having suffered an allergic reaction to the cleaner.",1
An employee was using a paper cutter when it amputated part of their finger.,0
"An employee was pushing a shopping cart when a forklift struck it. The cart struck the employee causing her to fall backward to the concrete floor and suffer an injury that caused pain in her neck, back, and shoulder.",1
"A powered industrial vehicle backed out of a garage and ran over an employee's left foot, breaking it. The employee was hospitalized for surgery.",1
"An employee was walking on uneven, rocky ground alongside a shallow trench less than 3 feet deep while installing electric utility conductors. The employee fell into the trench and landed on his left foot, resulting in a hairline fracture of the lower left leg that required hospitalization and surgery.",1
"An employee tripped and fell while putting away dental equipment, hitting their head on the floor and suffering a head injury.",1
"On June 28, 2022, an employee had just entered the area near an irrigation pump when a pipe burst. The employee was sprayed with hot water and suffered second-degree burns to the left side of his torso and his face, his abdomen, his left arm, and his left knee.",1
"An employee was moving parts in a crating system and putting them in place when one side of the crating system fell over and struck the employee, knocking him to the floor. The employee suffered a concussion and laceration on the back of the head that required staples. The employee was hospitalized.",1
"An employee was removing an overhead crane chain from material that had been placed on a saw conveyor. The chain hook caught on the conveyor, then came loose and struck the employee. The employee suffered a fracture to the right side of the jaw.",1
An employee was setting piles. A pile driver struck the employee as it moved from one area to another; the employee suffered an injury and was hospitalized.,1
"An employee was removing a water pipe. It came loose as he was pulling on it, and his fingertip struck an angle iron. He suffered a partial fingertip amputation.",0
"An employee stepped on a piece of oriented strand board on a roof. The board slid out from under him and he fell 12 feet to the ground, suffering a broken leg.",1
"An employee was trying to free two lift assists for reattaching doors, which had become stuck together. One of the lift assists was lowered and caught the employee's finger, partially amputating it.",0
"An employee was using a walkie-rider to move pallets. As the walkie-rider backed up, the employee's left foot was caught between the machine and the guard for the pallet rack. He suffered a broken bone in the left leg, as well as lacerations, and was hospitalized.",1
An employee was helping maneuver a rolling cart into an oven. Her left little finger was smashed between the moving cart and another cart sitting next to it. The fingertip was amputated.,0
"At about 8:00 p.m. on June 28, 2022, an employee fell into an elevator shaft. The employee fell about 13 feet to the level below and suffered a broken hip. The employee was hospitalized.",1
"An employee was watering flowers. A garden hose wrapped around her foot as she tried to disentangle it from a bush, and she fell off a 1.5-foot retaining wall. Her left side hit the wall, and she suffered two broken ribs and a laceration. She was hospitalized.",1
An employee was working at a construction site when a glass window fell onto the employee's foot. The employee suffered broken toes and a dislocated toe and was hospitalized.,1
"Two employees were rolling out film with a lay-on roller. While the film was being pulled from the roller, one employee's right middle finger was caught between the roller and the safety guard. Three-eights of an inch of the employee's right middle finger were amputated.",0
"On June 28, 2022, an employee stuck a screwdriver into a moving pulley on a mill, resulting in broken fingers and an amputation of the tip of their thumb.",1
"An employee was driving a maintenance cart. The cart was blocked in by a bundle of metal channels, so a forklift was used to pick up the bundle. The bundle's weight caused the forklift to tip onto its two front tires, which in turn caused the bundle to fall. The left forearm of the employee driving the maintenance cart was caught and lacerated between the bundle and the cart.",1
"An employee was operating a mechanical power press. The machine cycled and the pull-backs on his wrists did not pull his hands out of the way of the die as it came down. It crushed his left index, middle, and ring fingers, with a middle finger amputation.",0
"An employee was cleaning a derrick with a power washer. The employee slipped on a wet surface while untangling the power washer hose. As he reached out to catch himself, part of the derrick caught his right little finger and removed the flesh, exposing the bone.",1
"An employee was removing the bolts of a calender roller. When the last bolt was removed, the roller fell and pinched the employee's finger against the bearing housing. The employee suffered an amputation to a finger.",1
"An employee was lifting a 600-pound lab table onto a box truck using a lift gate. The table wobbled and fell over onto the employee's left index finger, crushing it. The employee was hospitalized.",1
"An employee was pulling a truck door closed. The door caught the employee's finger, causing a fingertip amputation.",0
"An employee was measuring the sheave of a pumping unit for replacement when his right ring finger was caught between the panels of the weight guard, amputating the fingertip.",0
"An employee was repairing a roof. The employee fell off the roof, suffering a broken wrist, fractured orbital bones, a laceration to the right eye, and head trauma.",1
"An employee was touring a ship when they passed out and fell to the flight deck, resulting in a fractured ulna and fractured distal radius.",1
"An employee was processing orders in a warehouse. The employee tripped and fell across a dolly and landed on their elbow, which was dislocated and broken.",1
"An employee lost his footing and fell 5 feet off an 8-foot A-frame ladder to the concrete ground, fracturing his ribs.",1
Two employees were installing an 8-inch C-900 watermain pipe. The pipe was shoved home while one of them still had his fingers in it. His left index and middle fingers were caught between two pieces of pipe and the fingertips were amputated.,0
"An employee was riding down an escalator when she fell, and her left shirt sleeve got caught between the yellow combs at the bottom of the escalator and the descending step she was seated on after falling. The employee suffered an injury to her left arm and elbow that required surgery.",1
"An employee was retrieving personal protective equipment from a bucket on a truck when they fell out of the back of the vehicle to the ground below, resulting in fractured bones.",1
"An employee tripped and fell, suffering a broken and dislocated ankle.",1
A driver jumped out the side door of a trailer onto the pavement and suffered a broken lower leg.,1
An employee was separating a pile of metal pipes by size. A pipe rolled onto his left hand and amputated the middle fingertip.,0
"While packing boxes and filling orders, an employee tripped on a box and fell, her knee striking the concrete floor.",1
"An employee was walking around a job site when they tripped on a cable and fell into a hole, resulting in a broken leg and six broken ribs.",1
"An employee was driving a utility vehicle down a hill. It tipped over and slipped down the hill, with the employee's left foot and leg trapped under its side. The employee suffered fractures and was hospitalized.",1
"An employee was operating a steel roller machine. The rollers caught the employee's glove. The machine stopped. When it was reactivated, it pulled in and partially amputated the employee's right index finger.",0
"An employee was performing preventative maintenance on a commercial-sized ironer. After oiling the chain and sprocket, he reached into the gear box with a rag to clean residual oil from the chain. The chain pulled in the rag and his left hand. His index finger was caught in the chain and sprocket, which amputated the fingertip.",0
"On June 29, 2022, an employee was moving a cart from one trailer to another. The cart tipped over and crates of dairy product fell out of it, striking and breaking the employee's leg. The employee was hospitalized.",1
An employee was raising the lift gate on a box truck when his paperwork fell. He reached to grab the paperwork and the closing liftgate caught his left thumb between the plate and the truck. The thumb tip was amputated.,0
"An employee slipped while closing a junction box and fell off a ladder. He landed on his arms on the concrete below, suffering two broken elbows.",1
"On June 29, 2022, an employee was found laying next to a delivery truck exhibiting signs of heat exhaustion. The employee had worked his entire shift of loading and unloading fuel and had clocked out two hours prior to being found by another employee. The employee was hospitalized with heat stroke.",1
"An employee was trying to hit a wooden block with a hammer. The hammer hit the tip of his finger, amputating the tip.",0
"An employee was connecting a stove to a gas line when a fire started, resulting in first and second degree burns to their chest and upper arms, covering 13% of their body.",1
"An employee was walking below a scaffold when a 2x4 fell and struck their shoulder, resulting in a fracture.",1
An employee was backfilling a trench wall with a concrete mix. He was standing in the mix when it went inside his boots resulting in third degree chemical burns to both legs in various spots from the calf down to the foot.,1
An employee was cutting metal with a knife. The knife slipped and lacerated his left arm.,1
"An employee was operating a walkie stacker, walking backward toward a door, when their arm was caught through the handle of the equipment and was pinned against the dock door. Their hand twisted back and could not let go of the throttle. The employee was hospitalized for torn ligaments.",1
"An employee was operating an aluminum trim press. While reaching down to put another part in a bin, their right hand was crushed by the press resulting in a partial amputation of a finger.",1
"An employee was replacing a broken drill bit in a computer numerical control (CNC) machine. The employee then placed a part in the machine to process it, reset the tool in the machine, and checked that the machining part was butted up against the stock part. The employee then used their right hand to push back on the part by striking the side of the part when their wrist contacted a sharp edge on the part, resulting in a laceration.",1
An employee fell through a roof while placing material for construction work. The employee struck the ground and suffered various injuries.,1
"An employee was helping unjam a planer. The employee's arm was pulled through a roller and the employee suffered three broken fingers, a broken hand, soft tissue damage, and lacerations.",1
"An employee was delivering packages on a route. The employee began to show signs of heat stress and was hospitalized, suffering from heat-related illness and muscle injury.",1
"While setting up a plate saw for production, an employee pressed a button to move one table hydraulically toward the other table on a glide wheel, but the hydraulics did not work. The employee was moving the table by hand when their left index finger was pinched between the two tables, resulting in an amputation above the first knuckle.",0
"An employee was opening a bag of tire chrome rubber to load it into a hopper. There was an explosion and fire, and the employee suffered third-degree burns to the hand.",1
"A dock plate was being lowered onto a trailer when it jammed. An employee was trying to lift it when its weight caused it to fall on the tip of his right middle finger. He suffered a partial amputation to the fingertip, with no bone loss.",1
An employee walked through the doorway from a kitchen to a dining area and tripped over a mat measuring 4 feet by 6 feet. The employee fell and suffered a broken left hip and a laceration to the face that required stitches.,1
"An employee was driving through the parking lot when she struck an upright, resulting in a head injury.",1
An employee was walking through the gravy cooler when he slipped. His left hand went into one of the pots containing hot gravy. The employee was hospitalized with second degree burns to the left forearm and blisters.,1
An employee was feeding rubber back into a vertical rubber calender when their right hand was caught in a nip point between calender rolls. The hand and fingers were crushed.,1
"A temporary employee was loading packages on an aircraft when his fingers were caught in a conveyor. His right ring fingertip was amputated, and the nail of his right middle finger was removed.",1
"An employee climbed from a rolling stair ladder onto shelving to check containers of inventory. While climbing back onto the ladder, the employee fell from the shelving, striking the floor. The employee broke both bones in the lower right leg and suffered cuts on the hands and a back strain.",1
"An employee was training on the use of a self-recovery device. As he lowered himself from a bucket, the rope broke and he fell 18 to 20 feet to the ground. A vertebra in his lower back was fractured and he was hospitalized.",1
"An employee was cutting lettuce with a knife. The knife cut his left index finger, causing a fingertip amputation.",0
"While an employee removed leftover food from a food processor in the downstairs kitchen, the blades lacerated their left index fingertip, and caused amputations to their left middle and ring fingers.",0
"An employee was adjusting a tube mill. The employee lost footing and fell to the floor, suffering a spiral fracture to the femur.",1
An employee was preparing fence posts for shipment on a pallet. The employee's hand was struck by a post as it dropped out of the feeder. The post weighed approximately 65 pounds and caused tissue damage that required medical amputation to the distal phalange of the left middle finger.,0
An employee was working in a scissor lift approximately 8 feet above a canopy of light fixtures in a terminal to splice wires with a wire stripper. The employee used a fault tic tracer to test the wire prior to splicing it and received an electrical shock. The employee sustained burns to his left hand and fractured his scapula by hitting his shoulder on the rails of the scissor lift.,1
An employee suffered eye and head injuries caused by rotating uniform equipment. The employee was hospitalized.,1
"An employee was reaching into a dough-cutting machine to get debris out of it. The machine was activated and amputated his right index, middle, and ring fingertips. It was not locked out at the time.",1
"An employee was approximately 3 feet off the ground on a step ladder doing demolition work to a shed. A pipe broke loose from above and hit the ladder, knocking the employee off the ladder. He landed on a concrete slab and sustained a head injury and broken ribs. The employee was hospitalized.",1
"An employee was stowing components on a truck-mounted rock hammer. The employee was guiding a component into its final position while another employee operated the hydraulic controls. The rock hammer moved and pinched the employee's left index finger, amputating the fingertip.",1
An employee was removing a pan of cooked pasta from a steam oven when they tripped and spilled hot water on their legs and elbow. The employee was hospitalized for burns.,1
"An employee was clearing a backup from an extrusion machine. The backup caused hot water, steam, and raw material to flow out of the bypass chute onto the floor. As the employee was shutting down the equipment, he slipped on the floor and landed in the material resulting in thermal burns to the back, hand, hip, and leg.",1
"An employee reached down to pick up an empty box. When he stood up, he became dizzy, fell back to the concrete floor, and suffered head and shoulder injuries.",1
An employee was retrieving a utility knife when his glove got caught by another employee's drill and his right ring finger was amputated.,0
An employee was operating an order picker. He was trying to turn and pull away from the racking system when his head got caught between the order picker and the racking system. The employee was hospitalized for a head injury with fractures.,1
An employee was retracting the outriggers on a boom truck when their right index finger was partially amputated by an outrigger.,0
"An employee was walking across a job site carrying half-full 5-gallon buckets of fluid when the loop of his left boot lace caught a lace hook on his right boot, causing him to fall to the ground on his left side. The employee suffered broken ribs and a punctured lung.",1
An employee was re-threading the wet side of a roller when their right hand got caught between the roller and the frame. The employee was hospitalized with a crush injury to their hand.,1
"An employee was standing at the bottom slope (used as cave-in protection) of a 5-foot deep trench guiding a pipe into the trench when it swung and struck him, fracturing his pelvis. The employee was hospitalized and required surgery.",1
"An employee was picking up material behind a utility vehicle. The vehicle backed over the employee, who suffered broken ribs.",1
An employee was pointing at a conveyor build when the tip of his left index finger was pinched and amputated by a link on the conveyor.,0
"An employee was working in the liquor production area. While walking down the stairs leading to the plant, he fell down about 6 stairs injuring his leg and hip.",1
"An employee was on a loading dock, trying to dislodge the lock on a dock plate. The employee fell off the dock and suffered multiple fractures. The employee was hospitalized.",1
An employee was driving home from work when he began to feel ill. The employee was hospitalized for heat stroke.,1
An employee was shocked while operating a welding machine.,1
"An employee was mixing material using a 75-liter tilt mixer bucket containing rotating blades. The bucket tipped forward with its blades still spinning. When he reached in to remove material, they caught his hand and he suffered a hand amputation.",0
"An employee slipped and fell from the top of a lime truck's tank, landing on the ground and suffering a knee injury.",1
An employee was servicing a conveyor. The employee's right index finger was amputated in a pinch point created by the conveyor and a metal product slide.,0
An employee had been grinding flashing for recycling. The employee was clearing a jam in the grinder and amputated his left index fingertip on the grinder's blade.,1
"An employee was moving a steel bar off a forklift and putting it on blocks on the floor. The bar rolled off the blocks and onto the employee's feet, causing multiple fractures to the left foot and one fracture to the right foot.",1
"An employee was pulling a rod out of a drill stem. His left hand was caught between two pieces of steel on the rig, and the pinch point amputated the tip of his little finger.",0
"An employee was climbing down a rolling platform ladder. She fell at the last step, suffering a broken tibia.",1
"An employee was moving a set of metal rollers, used to unload packages, out of a package car. The base of the rollers struck his ankle resulting in a compound fracture of the left foot. The employee was later hospitalized and required surgery.",1
"An employee had just stepped out of a fertilizer spreader cab and was going down the stairs of the machine. He fell, hit his ribs on the railing, and landed on the ground on his back. He suffered two broken ribs on the left side.",1
An employee was working on their truck when they were struck from behind by another truck. The employee sustained fractures and internal injuries requiring surgery.,1
"An employee drove a forklift into a trailer, set the parking brakes, and exited the forklift. The employee then went to strap freight in the trailer and the forklift rolled forward, crushing the employee's left leg and fracturing it.",1
"An employee fell from an 8-foot fixed ladder, landing on the ground and suffering fractures to his left heel and right knee, as well as a sprained left wrist.",1
An employee was driving a stand-up forklift out of a freezer. His left foot was caught between the forklift and a bollard. He suffered a laceration to the foot and ankle.,1
"An employee was walking through a building when he stepped into an 8-inch-deep sump pit containing hot water. He suffered burns to the lower right leg, between the knee and the ankle.",1
"An employee was participating in an evening program with a group of adventure campers when he slipped on wet grass and fell backward, hitting the back of his head on the ground. The employee was hospitalized with a brain bleed.",1
"While disconnecting a pipe, an employee was sprayed with hot material and sustained burns on the right side of his neck and torso.",1
"An employee was cutting a piece of metal sewer pipe with a chop saw. The sawblade caught in the metal, and the saw kicked back toward the employee. Its guard struck the employee, causing bruises and broken teeth.",1
An employee was driving a forklift when it ran into a rack. The employee suffered a leg injury.,1
"Two employees were unloading a truck full of poles when the boom contacted a 115-kV powerline. One employee on the ground was shocked, sustained burns, and was hospitalized.",1
"An employee was clearing a jam on a laydown trimmer. The machine started while his hand was in it, causing the amputation of his right thumb.",0
An employee suffered a lower back injury (with pain and numbness in the legs) while loading a 40-pound bag of sugar into a van. She was hospitalized.,1
"An employee was sweeping on a catwalk. The employee fell through an open catwalk gate and fell to the ground 9 feet 5 inches below, suffering broken ribs and a broken wrist.",1
An employee was adjusting an automated gate. The employee had loosened the roller when his glove got caught and his left hand was pulled into the drive chain causing the amputation of the index fingertip.,1
"A temporary employee was helping to change the blades on a bandsaw. One of the two hoods on the saw (which opened for blade replacement) closed on the employee's hand, resulting in an amputation to the right little finger. The employee was hospitalized.",1
An employee was manually rotating a belt on a roller when their right index finger was pinched between the belt and roller. The fingertip was amputated.,0
"An employee was cutting a piece of tubing with a chop saw. The saw caught on the material, causing the employee's left hand to jerk forward into the blade, which amputated the employee's thumb.",1
"A two-person crew was replacing a 100-amp meter loop with a 200-amp meter loop. One employee was securing the meter to a power pole; the other was measuring the length of lead needed to secure the loop to the transformer. At least one of the leads either came in contact with or arced on the jumper from the primary overhead line to the transformer. The employee securing the meter suffered a 14-kilovolt shock, receiving an entrance wound in the hand, an exit wound in the buttocks, and burns to the arm and other areas.",1
"An employee was sweeping near a conveyor belt when his sleeve was caught in the tail pulley. His right arm was pulled into the belt and pulley, fracturing the forearm.",1
"On 7/01/2022, an employee had been cleaning blueberry fields from 7:30 AM to 3:30 PM. The employee became ill and was later taken to the hospital for heat stress.",1
An employee suffered a lower-back strain while transferring a patient from a bed to a stretcher bed.,1
"An employee was walking into work, and fell while stepping onto a curb in the parking lot. The employee sustained a broken left hip.",1
"An employee was on the second step of a 4-foot A-frame ladder. The ladder collapsed and the employee fell to the floor, suffering a broken left ankle.",1
"An employee was clearing a bad piece from an assembly machine. The machine was activated and pinched her right index finger, amputating part of the fingertip.",0
"An employee was helping reposition a patient for a CT scan. The employee tripped on oxygen tubing, fell to the floor, and suffered a broken hip.",1
"An employee and a student bumped into each other. The employee fell to the floor, suffered a broken hip, and was hospitalized.",1
"An employee was working in a store. As a person was leaving the store, they struck the employee in the back of the head with a scooter. The employee suffered a broken skull, a brain bleed, and a laceration to the back of the head.",1
"At 4:19 p.m. on July 1, 2022, an employee became overheated while raking asphalt to patch holes on a highway. The employee was hospitalized, suffering from heat exhaustion.",1
An employee got off a forklift to adjust something on a storage rack. The forklift drifted forward and its tire pinned the employee's left foot against some material. The employee suffered a broken left ankle and a dislocated right shoulder.,1
"An employee became ill while working on a bread production line. The employee was hospitalized, suffering from potential heat-related illness.",1
"At 6:30 a.m. on July 1, 2022, an employee was helping tear down a pasteurization milk plate when hot water was discharged from a pipe. While moving to avoid the water, the employee fell, suffering a dislocated right shoulder as well as burns on her back from the water.",1
"An employee had punched out and was leaving work. He walked down stairs and missed the last step, fell, and his head hit a dumpster next to the steps. The employee sustained a head Injury.",1
"An employee was pushing out a bushing from a part using a hydraulic press. The bushing came loose and the part hit the employee in the head and face, causing head lacerations and a facial contusion.",1
"An employee was in the back of a piece of mulching equipment cleaning it. As the employee was raking material off the rotating drum, the rebar-like material that is attached to the drum caught the employee's shirt and pulled him into the machine. The employee suffered three puncture wounds to the chest in the armpit area with a punctured lung. The employee was hospitalized. The machine was not locked or tagged out at the time of the incident.",1
An employee was building a bicycle when its disc brakes amputated the tip of the employee's left index finger.,1
An employee was clearing plastic from a rotary planer. The machine pulled in the employee's hand and abraded the employee's right arm.,1
"An employee was vacuuming up media from a vertical tube dryer while standing inside a plastic collection container while a co-worker was outside of the container with a shovel trying to loosen up the media still inside the dryer. The media inside the dryer became dislodged and entered the collection container, engulfing the employee up to the bottom of his hips. The employee suffered first and second degree burns to both of his legs, just below the hips.",1
"An employee was guiding a radiator unit through an open doorway. The employee's left thumb was caught between the radiator and the doorway, causing the amputation of the thumb tip including the nail.",0
"An employee was moving defective product into a large cardboard box when they tripped over a packaging strap and fell to the concrete floor, resulting in a hip injury.",1
"An employee was in an elevated bucket, working to replace 600-amp inline switches when an arc flash occurred. He sustained second and third degree burns to the back.",1
An employee had been working behind the sales counter and became confused and disorientated due to possible heat stroke. It was 103-degrees outside that day and the air conditioning in the building was not working.,1
"On July 2, at 3:50 PM, an employee got out of their car and was walking in the driveway. The employee dropped their keys on the driveway. While picking up the keys, the employee lost balance and fell onto the concrete driveway surface. The employee was hospitalized with a  compression fracture in their lower back, a jammed finger, and pain in their right elbow and wrist.",1
"On July 2, 2022, an employee was riding a mountain bike down a sloped trail. The bike's rear tire washed out on loose gravel at a curve, and the bike crashed. The employee suffered a dislocated hip and a broken collarbone. He was hospitalized.",1
An employee was dumping a hopper when it became stuck. The employee was adjusting the safety pins holding the hopper's arm when their left little finger was caught between an arm and a pin. The employee suffered a possible partial amputation of the finger.,0
An employee was helping to troubleshoot the HVAC system. They took the electric panel off to look at it and used a multimeter on the wires inside. There was an arc flash and the employee sustained burns to both hands.,1
An employee slipped on the floor while walking near the cook line and tried to stop the fall by placing their right forearm on a flat-top grill. The employee sustained second degree burns and was hospitalized.,1
"An employee fell from the second-to-last step of an A-frame ladder, landing on the floor and suffering bruises to the face and rib pain.",1
"While an employee was loading a plane with food, she tripped on the bottom section of an elevator and struck her head and face on the floor of the elevator. The employee sustained a concussion and facial lacerations.",1
An employee was walking under a rig floor when a piece of floor gap filler came loose and landed on the employee's head. The employee suffered four broken vertebrae.,1
"A fireworks technician was setting up a fireworks display and connecting the electrical ignitor into the shunted module. While unraveling the ignitor, it discharged a 3-inch finale chain (10 shells). The first shell struck the technician's rib cage and arm. The technician was hospitalized with burns to the ribcage and a laceration to the right arm.",1
"An employee was filling a tank with hot water. The connection between the hot water supply and the blending tank broke and 205-degree water from the supply line burned the employee's chest, upper legs, and left wrist.",1
"An employee was cleaning a fryer. Hot cooking oil splashed on the employee, who suffered burns to the chest and stomach.",1
An employee opened the rear gate of a waste container in preparation for disposal. A caustic sludge splashed up his pants leg and caused a chemical burn on his lower leg.,1
"An employee was investigating the condition of the flame inside an oilfield separation vessel when the sight glass cover was expelled, allowing the heat to burn and blister the employee's right cheek.",1
An employee was handling a rubber roll. His finger was caught between the roll and an extrusion truck. The finger was partially amputated.,0
"An employee slipped on a floor mat, suffered a broken arm, and was hospitalized.",1
An employee was operating a tabletop fryer when it fell from the table. The employee suffered multiple burns.,1
"An employee was tasked with offloading a marine vessel. He was resetting the loading arm back into place when his left hand was caught between the load arm head and a fixed dock component, amputating his index and middle fingertips.",0
"An employee was working in a patient's room when they tripped over a wheelchair and fell, resulting in a knee injury.",1
"An employee was climbing an extension ladder to work on refrigeration systems on top of a cooler. He slipped due to oil on the bottom of his boot and fell to the concrete floor about 10 feet below, suffering two broken legs.",1
"On July 4, 2022, an employee was moving a pipe when he made contact with hot asphalt, suffering a burn to the left forearm.",1
"A driver was on a dock, opening the door of his trailer so it could be unloaded. He was struck by a powered industrial truck (PIT) and was hospitalized with a fractured left leg/foot.",1
"An employee was sweeping the deck after pulling back layers of roofing material and exposing the composite deck. The employee fell through an opening through the interior drop ceiling approximately nine feet to the floor below suffering bruising and lacerations to the back, head, and legs.",1
An employee was cutting pipe for scrap when their utility knife slipped and the blade lacerated their left forearm.,1
"An employee was pulling waste lumber material onto a conveyor deck when their left little finger got caught in a conveyor chain, resulting in a fingertip amputation.",0
"An employee tripped over computer cords (plugged into a wall) and fell to the concrete ground, breaking her right hip.",1
"On 7/05/2022, an employee was on a ladder, dropping a cable line from its connection to a house. The employee jumped from the ladder to the ground and sustained a broken right heel.",1
"A temporary employee was trying to dismantle the wooden staging props on a trailer. He lost his balance and jumped off the trailer, landing about 4 feet below and breaking a bone in his right leg.",1
"Combustible gas had been vented from a combustor so that its pilot assembly could be safely relit. When an employee relit the pilot light, some remaining gas ignited, and the resulting flash fire burned his left hand and right forearm.",1
A mail carrier was exiting her delivery vehicle when she fell to the concrete ground. She sustained a broken left ankle that required hospitalization and surgery.,1
"An employee tripped over a dock plate and fell to the floor, breaking his right hip.",1
An employee was driving an ATV on a private roadway to respond to a well control event. The employee lost control of the ATV and used their left leg to try and prevent the ATV from flipping over. The employee's left leg was fractured.,1
An employee had been installing electrical conduit in a trench outdoors. The employee became overheated.,1
An employee slipped and fell while taking out trash. He landed on the ground and suffered a broken leg.,1
An employee had been driving and delivering packages when they felt ill and sustained heat-related illness.,1
An employee bumped into a door frame while carrying a 5-gallon bottle of water. He fell to the ground and suffered an injury to his upper leg/hip area.,1
"After completing their package delivery route, an employee returned to the facility experiencing heat stress and cramping.",1
"After completing their delivery route, an employee returned to the mail facility and showed signs of heat exhaustion. The employee was hospitalized.",1
An employee was aligning a steel beam when it rolled onto his left leg causing bruises.,1
"An employee was feeding tree limbs into a wood chipper when the winch line caught the employee's hand, pulling his hand/fingers into the chipper blades and resulting in an amputation injury.",1
"An employee was kneeling to turn off a valve at a gas meter. When he stood up, he felt pain in his neck, back, and legs. The employee then fell to the ground.",1
An employee was preparing to install shoring into a trench and became tangled in a rope that was connected to the shoring. The rope pulled the employee to the ground and nearly dragged him into the trench. The employee sustained two broken ribs.,1
An employee was stepping off a yard horse jockey when he fell. He landed on the ground and broke his left leg.,1
Two employees in a bucket truck were working at the top of a distribution pole. A mechanical jumper came in contact with a power line while they were moving lines. An arc flash occurred and one employee was hospitalized for electric shock and second degree burns to the back and abdomen.,1
"An employee was sweeping a flat roof when they fell approximately 10 feet through an unsecured flooring panel, landing on the floor below and sustaining bruising and back lacerations.",1
"An employee was conducting a job site visit. As the employee was walking down stairs that did not have a handrail, they fell approximately 10 feet down the stairs to the concrete floor below, resulting in two fractured vertebrae.",1
An employee was navigating a scissor lift through a doorway when he contacted the door frame. The employee sustained a broken jaw and lacerations on the neck and the top of the head.,1
"On 7/05/2022, at 11:50 AM, a technician was at a store to perform a maintenance service when an unidentified driver drove their vehicle toward the technician and struck him. The technician was hospitalized with broken bones.",1
"A forklift backed over an employee's foot, breaking three bones.",1
An employee was holding a door open for a resident when the door slammed shut on her right middle finger and amputated it.,0
"An employee was handling a magnetic cylinder at a die station. When she tried to roll the cylinder into a cradle, it overshot the cradle and fell onto her right hand, amputating the little finger past the first knuckle.",0
An employee was operating a powered pallet jack when it struck a pallet of product on a stand-up forklift. The employee suffered a fractured tibia and fibula and a muscular injury.,1
"An employee was pulling wires to an electric junction box while on a scissor lift. He stepped on sheetrock and fell through it, landing on the ground 12 feet below. The employee sustained fractures to the back, pelvis, and wrists.",1
"An employee was loading a truck. The employee fell between the truck and the loading dock, sustaining an injury to the right ankle that required surgery and hospitalization.",1
An employee suffered a heat-related illness and was hospitalized.,1
A mechanic sustained a partial amputation to his right index finger while making repairs to a derrick truck.,1
Two employees were using a magnet attachment on a hoist to turn over a large steel plate to put it in a machine for cleaning. The steel plate fell from the magnet and struck the injured employee resulting in a fractured right leg and lacerations.,1
An employee was exiting the building when they slipped/tripped and fell on the floor. The employee sustained a fractured pelvis requiring hospitalization.,1
"An employee was painting from the third step of a 6-foot ladder. As the employee descended the ladder, their foot missed the second step and they fell to the ground, resulting in a broken ankle.",1
"At 3:30 p.m. on July 6, 2022, an employee was cleaning dirt from a curve with a shovel when he developed heat-related cramps in his legs and arms and a headache. He was hospitalized, suffering from dehydration.",1
"An employee was walking in a parking garage to his car while leaving work for the day. The employee attempted to climb a wire partition in the parking garage when he fell off the partition, resulting in a broken right hip.",1
"An employee had been operating the roll machine at the mill. He was turning off the steam to the roll when he tripped. As he was falling, his right hand became caught in the peg feeder. The employee sustained a partial finger amputation and other injuries to the hand.",0
An employee developed heat stress at the end of a work day feeding lumber into a machine. The employee was hospitalized.,1
An employee developed heat stress after completing his normal work tasks. He was hospitalized.,1
An employee was putting a tissue block in the clamp of a microtome when their left thumb was caught between the block and blade holder stage resulting in partial amputation of the left thumb without nail or bone loss.,0
"An employee was using a standup forklift to unload a truck with two pallets of material. The employee stepped out of the rear of the forklift to check for something on the truck when their left foot got caught between the truck, dock plate, and lift. The employee suffered crush injuries to the top of their foot and their heel that required hospitalization.",1
A driver was delivering freight. He tripped and sustained a broken arm and a dislocated shoulder requiring hospitalization.,1
"At 5:50 AM, on July 6, 2022, maintenance employees were resetting the rehanger machine due to timing issues. They had staged the 'cars' away from the sensors. The injured employee held the 'cars' nearest to one of the sensors to keep them away from the sensor at startup. The injured employee then released the car frame which caught the sleeve of his coat and dragged his left hand. Due to the force of multiple 'cars' piled up, his hand was forced between the kicker and the top side of the 'car.' The 'car' lacerated his left palm as he pulled it away. The employee was hospitalized and required surgery.",1
An employee was found unresponsive in their delivery vehicle due to heat exhaustion.,1
"An employee was driving an empty lift through an aisle when it collided with another lift head-on. A pallet of supplies on the second lift broke; pieces of it, and some of the supplies on it, fell into the employee's cab and hit the employee's lower left leg. The leg was broken and the employee was hospitalized.",1
"An employee was installing an electric fan when it jumped and hit his fingers, partially amputating the left index finger.",0
"At 7:24 a.m. on July 6, 2022, a border patrol employee was bitten by a snake while on patrol. He was hospitalized.",1
"An employee was loading xylene and fumed silica powder into a vessel when the vapor ignited, causing a flashback fire. The employee was burned on his face and both hands. He was hospitalized.",1
"An employee was cleaning sand off the rear of a dump truck. While closing the rear gate, his right ring and middle fingers became caught and were amputated by the gate. The middle finger was successfully reattached.",0
"An employee was assisting a work group in removing a cylinder drum when they were struck in the face by a falling frost bar, resulting in a fractured orbital bone.",1
An employee was walking down steps to go to the time clock and punch into work. Her right knee buckled and she fell down two steps to the floor. The employee sustained a fractured left hip.,1
An employee was reaching into the electrical panel of a CT Scanner and was shocked by 480 volts of electricity. The employee sustained electrical shock and burns to the right hand and arm.,1
"An employee stepped off a sidewalk curb and fell, landing between the curb and a golf cart. Both her legs were broken.",1
"An employee was using a hose-cutting machine. The machine cut the employee's right index finger, causing a partial amputation.",0
An employee was servicing a roof-top HVAC unit when their left hand contacted the spinning fan blades of the condenser. The employee's ring and middle fingers were both amputated at the knuckle.,0
"An employee was cutting down a tree. When he made a cut, the weight of the tree's top section broke off the lower section, which he was tied off to. He fell about 20 feet, landing on the grass-covered ground and suffering a lower back injury.",1
"An employee was clearing a jam in a press when the machine actuated, amputating their right index fingertip.",0
"An employee was walking to the clinic when they tripped on a chain used to keep vehicles out of the ambulance loading dock. The employee hit their elbow on the sidewalk, sustaining an open fracture to the left humerus.",1
"An employee was moving a 1,400-pound trolley tree loaded with ham hocks to a cooler. The trolley hit a kink in the overhead rail system, derailed, and fell onto the employee, pinning him beneath it. The employee suffered a bilateral pelvic fracture.",1
An employee was working on a production line when he began experiencing cramps in his legs and subsequently throughout his body. The employee was hospitalized due to heat stress.,1
"An employee was packaging product in 55-pound bags when they stepped onto the conveyor in the packaging line. The employee's leg was pulled between two moving parts of the conveyor, resulting in a crush injury to the left leg.",1
"An employee sustained heat-related illness while operating an overhead crane, resulting in acute kidney failure and hospitalization.",1
"An employee was cleaning up items in a racking area. He became overheated, suffering from dehydration, and was hospitalized.",1
"An employee was using a powered pallet jack to move cases of water. As the employee backed up and turned, the employee's left leg was caught between the pallet jack and a pillar. The employee's fibula and tibia were broken.",1
"An employee fell off a ladder while cleaning, landing on the floor and suffering a back injury.",1
"An employee was on a 10-foot ladder. He was about to climb down when it became unstable; after hanging onto ductwork, he fell and suffered a broken lower left tibia and ankle. He was hospitalized for surgery.",1
"An employee was performing work in a junction box of a 277-volt system when they received an electrical shock and burns to the hand, resulting in hospitalization.",1
An employee was cleaning a conveyor in a deboning area. His rain suit sleeve was caught in the conveyor sprocket and his left forearm was broken.,1
"At about 3:20 p.m. on July 7, 2022, an employee developed a heat-related headache while doing measurement work in the field. He went home and was later hospitalized with heat-related illness.",1
"An employee was hauling a wood box full of trash with a forklift. The forklift struck a ditch and rolled over, resulting in a fracture to the employee's left leg.",1
"A temporary employee was stacking steel bundles on a leveler when steel came down the line and contacted his right arm, resulting in a cut below the bicep and above the elbow that required hospitalization.",1
An employee was closing the door to the cab of a front-end loader. The employee's right index fingertip was caught and amputated between the door and the doorframe.,0
An employee was sitting on a steel I-beam when it rolled onto his leg. He suffered a fracture to the lower leg.,1
"At 6:00 p.m. on July 7, 2022, an employee suffered a back injury while adjusting tines on a forklift. He was hospitalized.",1
"An employee tripped and fell to an operating room floor, suffering a broken hip.",1
"An employee fell off a ladder, landing on the ground and suffering a head laceration.",1
"An employee was using a ladder to cut down a dead wire that led to a residential home to prepare for water and sewer line work. The wire snapped back and pulled the employee off the ladder, causing them to fall 8 feet to the asphalt below and fracture their left wrist and elbow.",1
"An employee was felling a maple tree. The tree began to fall but became entangled with a dead tree. The top of the dead tree broke and fell into the employee's retreat path, striking his lower back and causing a hematoma.",1
"An employee went outside to open a trailer. He became dizzy, lost consciousness, and fell, striking his head on the trailer landing legs. The employee was hospitalized for heat exhaustion.",1
"An employee was monitoring a sugar bagging processing line. The bagging machine jammed, and the employee reached to clear the jam. The machine amputated the employee's right index finger down to the middle knuckle, also injuring the right middle finger.",0
"An employee was standing at the top of a cement staircase in a building under construction. The employee passed out and fell down the flight of stairs, resulting in fractures to the ribs and pelvis that required hospitalization.",1
An employee slipped and fell while climbing a ladder to a 10-foot roof. The employee suffered two broken wrists.,1
Employees were performing water-based excavation using a hydrovac truck. The stream of pressurized water lacerated an employee's left foot.,1
"On July 8, 2022 at 9:00 a.m., an employee was removing a flow meter located approximately 8.5 feet off the ground on a heated water system. The building was almost complete, so the heating and chilled water systems were operational. The employee was standing on the second rung from the bottom of the 6-foot A-frame ladder that was placed on a 6-foot concrete pad in the locked position. When the meter probe was removed, 180°F water under pressure struck the employee, causing him to fall backward off the ladder and resulting in a fractured ankle and hot water burns to both arms and his back.",1
"An employee was loading a truck when a powered industrial truck ran over his foot, resulting in a broken foot that required hospitalization.",1
"An employee was assisting with the placement of 8-by-7-foot steel plates. A fork truck driver attempted to reposition the plates when the plates shifted and struck the employee, resulting in a fractured distal fibula, fractured malleolus, and dislocated tibia.",1
An employee was reassembling a piston. She was trying to insert the sleeve inside the piston by hitting the piston onto the table when her finger was caught in the side port of the sleeve. She suffered a fingertip amputation.,0
An employee was cutting a piece of wood on a band saw when the blade amputated one of her fingers above the knuckle.,0
"An employee was trying to prevent a block from swaying as it was attached to a crane. The crane moved, and the employee's left hand was caught in the sheave of the main block. The employee suffered amputation of 1/4 of the left ring fingertip and a laceration to the little finger.",1
An employee was blowing leaves and debris off a residential roof approximately 12 feet high when they fell off the roof onto the concrete driveway suffering shattered heels.,1
"An employee was installing scaffolding on top of a steel water tower when they fell 14 feet 10 inches to the ground below. A self-retracting lifeline was used, but the employee's right foot contacted the ground, resulting in a fractured foot and ankle that required hospitalization and surgery.",1
"On July 8, 2022, at 10:00 PM, an employee was working on top of a semi-trailer when they fell through the roof of the trailer and landed on the trailer floor, resulting in fractured ribs and a broken elbow that required hospitalization.",1
"An employee was inspecting rail cars from the top to ensure they were ready to accept grain for shipment. The rail car moved and he ducked to avoid the grain spout, which snagged his fall protection, causing him to fall into the rail car. His fall protection caught him, but he struck the wall of the car and suffered facial injuries including a potential orbital fracture.",1
"An employee and a work crew were attempting to lower a 10-by-10-foot sheet of steel into an excavation using a hydraulic excavator. The hydraulics in the boom of the excavator failed and the sheet lowered, contacting the floor of the excavation and coming loose from the sling rigging. The steel sheet fell over and struck the employee, resulting in a fractured pelvis.",1
"An employee was working on a flat roof to turn off water valves for a leak repair. As the employee walked over an expansion joint, he tripped and fell onto the roof surface, resulting in a head laceration and neck fracture.",1
"A delivery driver fell while delivering parts to a barge. The driver's left leg was caught between the dock and the barge, causing a cut to the left shin.",1
"An employee was climbing into an excavator when they slipped and fell to the ground, resulting in a fractured hip.",1
"An employee was helping grease the gears on a machine. The conveyor belt pinched the employee's index finger, degloving it.",1
"An employee was troubleshooting a water leak when the pressurized water circuit burst and sprayed hot water onto the employee, resulting in burns and blistering to their left arm and torso.",1
An employee was filing the chain of a conveyor when their right middle finger was caught in an incoming nip point. The fingertip was amputated.,0
"An employee was bucked off a horse and fell to the ground, suffering a hairline fracture to the pelvis.",1
"A temporary employee was moving pitching mounds when he developed dehydration-related cramps in his legs, toes, hands, and stomach. He was hospitalized with acute kidney failure and dehydration due to heat.",1
"An employee was working on a drive to a conveyor. As he worked on the chain, the conveyor started up and caught his left hand fingers in the sprocket resulting in amputation of the index, middle and ring fingertips.",1
"An aerial drop cable had been attached to a pole and run across a residential street; an employee was across the road climbing a ladder to attach the cable at a house. A truck drove by and hit the cable, ripping it out of the employee's hand. The cable was still attached to the spool near the foot of the employee's ladder, and the spool pulled the ladder down. The employee fell 12-15 feet to the ground and suffered a broken lower-back vertebra.",1
An employee slipped off a ladder while exiting a feed bin. The employee hit an uneven bottom part of the bin and suffered a dislocated right ankle.,1
"On July 8, 2022, an employee was traveling from a work site to retrieve their vehicle when they became dehydrated and experienced cramping and kidney failure, resulting in hospitalization.",1
An employee was reaching to pull a piece of meat out of a vertical bandsaw when the bandsaw amputated the employee's right little fingertip.,1
An employee became dehydrated and developed heat exhaustion while collecting residential waste.,1
An employee was setting up and calibrating a stacker crane when he was pinned between the crane and a nearby column. The employee was hospitalized with fractured ribs and a punctured lung.,1
"On July 8, 2022, an employee was walking down a flight of stairs carrying a bin of utensils when he fell down the stairs to the floor below, resulting in a laceration to his leg that required hospitalization.",1
"At about 5:40 p.m., on July 8, 2022, an employee fell to the ground while getting out of a package car in a parking lot. He suffered a broken right leg and was hospitalized.",1
"An employee had been making ""RR"" installations. The employee was hospitalized with heat stroke.",1
"At 6:15 a.m. on July 8, 2022, an employee was preparing to weld hinges and other parts to an inner trailer door. The employee was picking up the top hinge part of the trailer door with a pry bar, as well as placing a small block under the inner door or top hinge part. The pry bar slipped and the inner door fell about 4 inches, landing on the employee's left little finger. The finger was broken and the fingertip was amputated.",0
"On July 8, 2022, at 7:00 PM, an employee was entering his truck to retrieve paperwork when he slipped off the step of the truck and fell onto the pavement. The employee's left wrist was fractured.",1
A UPS employee was walking to a home to make a delivery. The employee fell and suffered a hairline fracture to the right hip.,1
"At a mechanical press, an employee's fingers and thumb were partially crushed.",1
An employee was doing maintenance work on a piece of electrical gear. He suffered electrical burns to his arms and was hospitalized.,1
An employee was lifting a 128-pound object from a scooter to a table. When he twisted/turned to the right he felt a pop in his back. The employee suffered a back strain.,1
"An employee was moving pallets on a roller. A plastic drum on a pallet pinched his right index finger, causing a partial amputation.",1
"An employee slipped on spilled liquid and fell while stepping into a tractor, suffering a back injury.",1
"An employee was supervising a concrete pour. The deck that was being poured gave way, and the employee's right foot and ankle were pinched between two deck boards. The foot and ankle were broken.",1
"The injured employee was standing on the floor, discussing how to move an ingot with another employee who was on a forklift. A backhoe approached them and the injured employee moved to get out of the way. The forklift also moved out of the way of the backhoe and struck the injured employee, resulting in a broken right leg.",1
"An employee slipped on grease on a stairway and fell down 5 to 7 stairs, hitting his head and back. He suffered a head injury, a concussion, and shoulder and back injuries.",1
"An employee was cleaning a dish machine when it sprayed hot water on him, causing burns to his scalp, forehead, shoulders and fingers.",1
"An employee fell from a 12-foot ladder. He landed on the ground and suffered fractures to the ribs, a shoulder blade, and the pelvis.",1
One employee shot another after an altercation. The employee who was shot suffered a broken left arm and artery damage and was hospitalized.,1
"A package became caught in a conveyor, creating a jam. While trying to clear the jam, an employee was caught by a conveyor roller and pulled into the conveyor belt. The employee suffered friction burns to the hand and forearm, as well as a laceration to the forearm.",1
"The injured employee was working at the nurse's station. While helping a co-worker escort a patient back to their room, the patient grabbed the injured employee's left hand and bit off their left ring fingertip.",1
"An employee was slipped and fell on a wet laboratory floor, suffering a broken right hip. The employee was hospitalized.",1
An employee suffered a dislocated right shoulder while unloading a heavy bag of soiled linen.,1
"Employees were lifting a panel, about 29 feet by 36 inches by 3 inches, to check and verify it before moving to the next section of the panel bending process. One employee's right little finger was caught between the panel and part of the stationary equipment (an angle iron mount for an air cleaner). The finger was amputated above the third knuckle.",0
"On July 9, 2022, an employee fell from his garbage truck to the ground and sustained an injury to the left wrist. He was hospitalized.",1
An employee was operating a golf cart. The cart struck a piece of metal while turning a corner resulting in a severe laceration to the employee's leg. The employee was hospitalized.,1
An employee was using an air wand to clear debris around equipment. An unguarded belt and pulley caught the sleeve of his safety vest and pulled his left arm into the conveyor end. The employee was hospitalized with a lower arm fracture and bilateral arm lacerations requiring surgery.,1
"An employee was trying to clear jammed film from a machine. The machine cycled while the employee's fingers were in the forming box, causing amputations to the employee's index and middle fingertips.",1
"A utility pole trailer was being prepared for transport. The trailer moved, and an employee's leg was caught under its rear wheel. He suffered a knee injury and was hospitalized.",1
An employee was parking her forklift when her left foot and ankle were caught between the forklift and the angle iron resulting in amputation of the foot.,1
An employee stopped for a coffee break at gas station during his route. The employee engaged in an altercation with another gas station customer and suffered face and head injuries.,1
"An employee was observing the clean-up process of a spilled ladle. As the employee was walking away from an area of cooling metal, there was an eruption due to molten metal reacting with water. The employee fell forward, attempted to catch himself, and his right hand touched the molten metal resulting in burns to the little fingertip and middle finger.",1
"An employee was a passenger in a golf cart assisting with the delivery of food concessions. While making a turn, the cart went over a drop-off full of tree branches and the employee suffered a laceration in the left armpit area and a punctured lung. He was hospitalized.",1
"An employee was straddling a bundle of tubes on the floor while cutting the banding off a bundle of tubes on a table. The bundle on the table separated when the band was cut. One of the tubes bounced off the table, landed on the employee's right leg, and pinned it against the tubes on the floor. The employee's leg was broken.",1
"During physical training, an employee believed she had tweaked her back but did not experience serious discomfort. The employee and her crew went on fire patrol and her symptoms began to worsen. Following her shift, the employee was hospitalized with a heat-related muscular injury.",1
"Three employees were removing a broken shaft from an auger. They were using a MAPP gas torch to expand the casing around the auger. Because the auger was not coming out of the casing, canned air was used on the shaft to constrict it. The canned air liquid ignited in the torch's open flame, and one employee suffered first-degree internal throat burns.",1
"An employee was climbing down a ladder after stocking an overhead shelf. The employee missed the last step of the ladder, fell to the floor, and suffered a broken hip.",1
An employee was profiling a piece of solid bamboo lumber on a small table router when the rotating cutter amputated the employee's right index finger and thumb.,1
"While rolling a drill pipe on a pipe rack, an employee's left middle fingertip was crushed between the pipes and the pipe rack resulting in amputation.",0
"An employee was working on an 8-foot step ladder when they fell off the ladder, resulting in broken ribs and a broken shoulder.",1
"An employee was welding lugs into concrete on the ground. A metal plate from a walking surface 10-12 feet above fell onto the employee's left hand, causing an amputation of the index finger.",0
"An employee was trying to use a 460-volt floor grinder to prepare a floor surface in a building. While troubleshooting the grinder, there was a malfunction in the plug resulting in an arc flash. The employee sustained second or third degree burns to their left hand and ""welders flash"" to their eyes. The employee was hospitalized.",1
"An employee was leaving a room when they tripped, struck their right shoulder and upper arm on the doorway, then fell onto their right knee. The employee sustained fractures to their right humerus and right femur.",1
"An employee was in a trench working to repair a leaking pipe when the trench wall collapsed onto him. He was hospitalized with a broken clavicle, broken ribs, and a bruised arm.",1
An employee was performing a video safety audit of a telecom tower. He lost balance while transitioning from the second to the third step of a ladder. He reached out with his right hand to regain balance and stepped off the ladder. His right little finger got caught between two angles of the telecom structure and was amputated at the knuckle closest to the palm.,0
"An employee was connecting two hoses together on a fire line when they fell into a hot ash pit and sustained second degree burns to the shoulder, hands, and knee.",1
"An employee was placing a bottom shelf into pallet racking. The front right edge of the shelf hung up on the racking upright. The employee used a makeshift pry bar to pry it loose. When the shelf fell, pinching his left middle finger against the upright crossbar and amputating the fingertip.",0
"At about 3:45 p.m. on July 11, 2022, an employee's fingertip was caught between the material and the die in a brake press. The fingertip was amputated.",0
"An employee tripped while walking into a coworker's office. The employee hit a file cabinet, then fell to the floor fracturing her kneecap, femur, and L1 vertebra.",1
An employee was cycling a hopper on the back of a work truck. His hand was caught and crushed in a pinch point. He was hospitalized.,1
"An employee was working outside, installing cable, when they started to feel ill. They were taken to the hospital for possible heat related illness.",1
"An employee was rebuilding a setting tool, attempting to seat the lower cylinder onto the cylinder head by tapping the setting tool onto the trailer floor. As the employee pushed down on the setting tool, the mandrel stroked in the setting sleeve and pinched and amputated their right middle finger.",0
An employee was using a crane to turn a vessel head when the vessel head shifted and landed on his left hand. Two fingers were partially amputated.,0
"An employee was dismantling a four-tier scaffolding system. When the employee stepped on a wooden scaffold plank, it failed and the employee fell to the cement floor about 28 feet below. The employee was hospitalized for broken bones and body and head trauma.",1
Two employees bumped into each other. One of them fell to the concrete floor and suffered a broken left hip.,1
"An employee was spot-cleaning a die on an extruder. The employee collapsed, overcome by heat, and was hospitalized.",1
"Two employees were performing maintenance on an amine pump in the plant. A flash fire occurred, causing burns to both employees. One employee was hospitalized with burns to the face, shoulder, and back. The other employee was treated and released.",1
"A 1-foot gondola was being anchored to a wall. Its front leg was not sitting flush with the floor. An employee was keeping the leg upright with a pry bar, and another employee was trying to stabilize the leg when the anchor stripped out of the wall. The front leg dropped onto an employee's finger, amputating the fingertip.",1
"An employee was using a strap to pull an HVAC towards the back of a truck. The strap broke and the employee fell to the floor of the truck bed, landing on their left arm and fracturing their left wrist.",1
An employee was operating equipment on the sealer dry packaging line when the conveyor grabbed his gloved hand and pulled it inside the entrance to the sealer. The employee's left middle fingertip was amputated.,0
An employee was moving steel wire cages with an overhead crane. The load shifted and his right hand was caught between the cages. His right middle fingertip was amputated.,0
An employee fell off a platform while taking plastic wrap off a mold. The employee landed on the concrete floor 21.5 inches below and hit the back of his head. He suffered an injury to the back of the head as well as swollen eye sockets.,1
"A mechanic was working on a box truck. While closing the back door of the truck, the tip of his right thumb was caught in a pinch point and amputated by the door.",0
An employee was securely elevated in a bucket truck when they received an electrical shock from a high-voltage power line. The employee fell down in the bucket after he sustained the shock. The employee then stood up and his basket was lowered to the ground. The employee was hospitalized with burns to both arms and hands.,1
"An employee was attaching a catwalk to a new aggregate weigh hopper. He was standing on a concrete pillar at the base of the hopper. While pulling the catwalk into place, he lost footing and fell approximately 6 feet to the gravel covered ground, landing in a seated position. The employee was hospitalized with two fractured ribs and a fractured pelvis.",1
"An employee was on mobile stairs, clearing a box jam on a conveyor system. When the jam released, a box fell off the conveyor and struck the injured employee, causing him to fall 40 inches to the floor. The injured employee sustained a fractured hip.",1
"An employee working at the asphalt plant was standing on a conveyor belt trying to dislodge a clump of material. The conveyor started and the employee was pulled under a pulley resulting in a broken sternum, seven broken ribs, and injuries that required stitches to the neck and chin area.",1
An employee was removing a flexible hose from a production pipeline. The hose end detached from the pipeline end and sprayed the employee with hot water. The employee suffered burns to the left and right wrists and the front of the leg.,1
An employee was repairing a tray former. The anvil in the machine fell and severely lacerated his left hand.,1
"An employee was completing a roll change. As he reached out to stop the movement of a roll chock coming down the incline, his left hand was pinched between two roll chocks. His index finger was amputated.",0
"During assembly of a table, an employee collapsed and hit their head on an L-shaped guard on the floor.",1
Employees were starting the wood-fired burner of a kiln when flames and heat were discharged from the burner opening. Employee 1 was hospitalized with burns to both forearms and the abdomen and required surgery. Employee 2 was treated at the burn clinic and released.,1
"An employee removed a cover from a commercial air conditioning unit to change the filters and laid the cover over the A/C grating located at the bottom of the unit. While changing the filters, the employee stepped on the cover. The cover gave way and the employee fell through the grating, landing approximately 26 feet below on a concrete floor. The employee sustained a broken arm, a broken rib, and a punctured lung.",1
"An employee was on the roof of a two-story building doing carpentry work. He went to inspect another job on the roof, lost balance, and fell to the floor. He sustained two fractured vertebrae.",1
"A mechanic was using a torch to heat a wheel bearing in order to remove the bearing. A shop rag caught fire. Another employee threw washer fluid on the burning rag. The washer fluid caused a flash fire and the mechanic sustained second-degree burns to the face, chest, and arms.",1
Storm winds knocked down steel frames and materials for a building construction project and multiple employees sustained injuries when struck by the steel frames. Three employees sustained injuries that did not require hospitalization. A fourth employee suffered a broken arm and elbow and was hospitalized.,1
"An employee was opening the magnetic office door. To do so, he had to bend down and manipulate the door stop to keep the door open. After placing the door stop in the proper position, he stood up and fell backward striking the wall behind him and resulting in fractured thoracic vertebrae.",1
An employee was using a reciprocating saw when a spring under tension was cut. The spring impacted the employee's hand resulting in a broken thumb that required hospitalization.,1
An employee was operating a powered industrial truck (PIT) to move mail cages in the distribution center. The employee came to a stop and dismounted the PIT. The PIT rolled forward and pinned the employee against a metal cage causing two broken ribs and a head injury.,1
"A planer operator was trying to unjam a piece of lumber from the planer's infeed side. The lumber kicked back and struck the operator's right index finger, fracturing and lacerating it.",1
An employee was delivering a pallet of goods to a loading dock door using a powered stand-on pallet jack. His left big toe was crushed between a protective post at the edge of the door and the pallet jack. The toe was partially amputated.,0
"An employee was cutting out a catalytic converter using a pneumatic cutter. When he turned the cutter on, it amputated his right middle and ring fingertips.",0
An employee was riding in the back of a golf cart. The cart hit a rut during a turn and the employee's left ankle was broken between the cart and the ground.,1
"An employee's right little finger got caught between a gate and the bed of a dump truck, resulting in an amputation of the first knuckle.",0
"An employee and his coworker were sitting in the coworker's vehicle while on break in the front parking lot. At 3:40 AM a vehicle entered the property from the rear entrance, drove around and parked in the front parking lot. Five people wearing masks got out of the car and started attempting to open the doors of parked cars and were using a tool to break the side windows of some vehicles. One of the masked persons ran over to the passenger side of the vehicle the employees were in, realized there were people inside the vehicle, then ran toward the car they had arrived in. The injured employee then left the coworker's vehicle and one of the masked persons shot the employee in the chest with a gun.",1
"An employee was inside the bucket of a bucket truck, using the truck's winch line to lift a stop sign that was affixed to the ground. The winch line failed under stress, which caused the bucket to shift. The employee was dislodged and fell to the ground about 15 to 20 feet below, suffering a broken pelvis, broken ribs, and a punctured lung.",1
"An employee working in the foundry started feeling dizzy around 2:00 PM. Around 5:00 PM, the employee began to perspire a lot and went to his car to lay down. His arms were seizing and he had leg cramps. The employee was hospitalized due to heat exhaustion.",1
"An employee was unloading product from a trailer. While walking out of the trailer, a powered pallet jack entered the trailer, slid on the dock, and pinned the employee's right leg against the trailer wall. The employee's leg was fractured.",1
An employee was cleaning out a stuck board that had shifted in a sanding machine. One of the conveyors grabbed his left hand and pulled it in. The employee's hand was broken.,1
"An employee slipped and fell on a sidewalk, suffering a broken left ankle. She was hospitalized.",1
"An employee working in a sorting facility was petting a dog used to screen packages when the dog bit them, resulting in lacerations to their head and face that required hospitalization.",1
An employee was taking in donations from donors when he began to feel dizzy. The employee was overheated and dehydrated.,1
An employee was lighting a propane grill. A buildup of propane caused a fireball resulting in first and second degree burns to the employee's body.,1
"An employee was doing maintenance work on a rooftop HVAC unit. His right glove was caught in a belt and pulley, which pulled in and lacerated his ring finger. The finger was partially amputated.",0
"At 9:45 p.m. on July 12, 2022, an employee was trying to clear a jam in a machine. A roller nip point caught the employee's hand, and the roller lacerated the employee's palm. The employee was hospitalized.",1
"An employee was stabilizing a wind turbine blade from the side. The rigging on the crane that was holding the blade slipped, causing the blade to fall and land on the employee's arms. Both arms were fractured.",1
"While heat welding membrane on a roof, an employee sustained dehydration and heat stroke.",1
An employee had been working to install solar panel equipment. The employee was later hospitalized with heat exhaustion.,1
"An employee was working at a paper machine. He slipped on the wet floor and fell, striking the back of his head on the floor and resulting in a brain bleed.",1
An employee had been providing materials to a mason. The employee fell approximately 12-18 feet from a scaffold platform to the ground and sustained a fractured rib and a laceration to the head.,1
"A forklift struck an employee who was operating a pallet walker. The forklift pinned the employee's right leg against the pallet walker and a pallet, causing the leg to break.",1
"An employee was picking up three 5-pound rolls of tape. When he stood up, he fell, striking his back right side on a pallet and suffering a possible kidney laceration.",1
An employee strained the thoracic and lumbar regions of their back while moving boxes.,1
"An employee was replacing a house roof when he developed leg cramps. He was hospitalized, suffering from heat exhaustion.",1
An employee was operating a motorized line driver to paint lines on the apron at an airport. The employee became ill due to the heat and was hospitalized for heat exhaustion and dehydration.,1
An employee was operating an aerial lift at a steel erection. His right little finger was caught between the lift basket and a steel beam. The finger was partially amputated.,1
"Employees were tasked with installing concrete masonry units (CMU) top connections bent plates in a parking garage. An employee fell from the ladder to the concrete floor 9 feet below. The employee sustained a broken nose and injuries to their right cheekbone, right eyebrow, left elbow, and right wrist.",1
"A lineman had finished connecting a strand of cable to a pole. He was being lowered to the ground in a bucket. An RV coach drove through the work zone and caught the strand, which was lying across the road. The lineman was thrown 25-30 feet from the bucket to the ground and suffered multiple fractures.",1
An employee suffered muscle injuries and body cramps due to heat exhaustion while working at a jobsite.,1
An employee was working from an extension ladder using a paint brush to apply a chemical to the side of a building. The employee fell off the ladder and sustained a broken leg.,1
"An employee was on a table trying to push a block of cardboard paper. The employee fell from the table to the ground about 3 feet below, suffering a broken leg.",1
"Employees were installing an underground drainage line. The 6-foot ditch they were working in partially collapsed, and one employee was buried up to their upper thighs. The employee was bruised by the shoring equipment.",1
A driver had been delivering packages and was hospitalized due to dehydration and heat-related illness.,1
"On July 13, 2022, at approximately 3:30 AM, an employee was unjamming a plastic injection molding machine. Molten plastic was released from the machine and caused first, second, and third degree burns to the employee's upper torso. The employee was hospitalized.",1
"On July 13, 2022, an employee was bagging a customer's order when she tripped and fell over the customer's child. She was hospitalized with a broken right femur.",1
"An employee was painting a tank car with a paint gun. The gun jammed. As the employee was trying to unjam it, it injected paint into the employee's left middle finger.",1
"An employee was raking leaves, loading them into a barrel, and dumping the barrel in a loader bucket when they suffered dehydration and heat exhaustion.",1
An employee had three baskets of parts stacked on a work table. The top basket slid off the table and lacerated her right thigh.,1
"An employee was descending an outside stairway. He slipped on the steps, wet with rain, and fell. He strained both knees and suffered a quadriceps tear at the right knee.",1
"An employee was preparing to assess the location of an air leak on a saw. As the employee was exiting the bottom of the saw, the saw carriage went back to the home position, striking the employee's back. The employee sustained four broken ribs and required stitches on his left side.",1
Two employees were setting up and adjusting the tab position on a coil strip machine. The machine's press was actuated while one of them had his left hand in the press area. It crushed his index and ring fingers and amputated the tip of his middle finger.,0
An employee was breaking down a stuffer machine. The employee leaned toward the machine to look into the chamber that grabs and stuffs the horn when the foot pedal was pressed. The machine actuated and amputated the employee's fingertip.,0
A machinist was removing a tool from a computer numerical control (CNC) machine when the machine crushed his finger.,1
"An employee was trying to unbind a 20-foot piece of lumber from a cutter. The wood came free and struck the employee's head, breaking their nose.",1
A driver developed heat exhaustion/dehydration while making deliveries on his route.,1
An employee was working to tie in a temporary electric jumper when an arc flash occurred. The employee sustained burns to the stomach and right side of the torso.,1
An employee was lifting a sheet of steel using a chain hoist with a strap around the steel sheet. The strap broke causing the chain hoist to strike the employee's hand. The injury required surgery.,1
An employee was performing a rope replacement job on an elevator when their left little finger got caught in the jaws of the rope gripper. The fingertip was amputated approximately at the middle of the fingernail.,1
"An employee was climbing a ladder to make repairs on top of a refrigeration unit. The ladder shifted and the employee fell to the floor, suffering a fractured rib and a hematoma on the right kidney.",1
An employee was using a table saw to cut a 1-inch strip from a piece of 24-inch-wide vinyl flooring. The saw's 10-inch blade amputated the employee's left index fingertip.,0
"An employee was loading a refrigerator onto a dolly. The employee fell backward, landing on the trailer floor and suffering a broken upper-back vertebra.",1
"A converting machine operator was removing a scrap roll from a machine and wrapped a piece of scrap onto a new roll. The old, removed scrap and the scrap on the new roll became intertwined and began to pull what he had already taken from the machine. The employee used scissors to cut the two different scrap rolls and the scissors amputated his left index fingertip.",1
A crew was replacing bearings and belts on a blower motor. Three belts on the shaft had been removed. An employee was reinstalling the belts between the motor and the blower when his right middle finger was caught between the belt and the pulley. The fingertip was amputated.,0
An employee went into a bathroom to refill the paper towel holder. She lost balance and fell on the floor sustaining a fractured hip.,1
"After delivering packages, an employee became sick and developed leg cramps. He was hospitalized, suffering from heat-related illness.",1
"An employee was dead-ending an electrical connection. After coming down in the bucket truck the employee realized he left a nylon strap on the upper portion of the pole. While retrieving the strap the employee made contact with an energized line resulting in a shock. The employee sustained burns to the left arm, back, and chest.",1
An employee was taping plastic on the ground at a construction site and started to feel ill. The employee was hospitalized with heat-related illness.,1
"An employee was cooking on an institutional grill. An aerosol can of cooking spray was nearby and was heated up by the grill. The can exploded and burned the employee's hair, face, and arms.",1
"A mechanic was preparing to lift a car for an oil change. He was placing a block between the car and the lift on the left side. The lift was raised and caught the employee's left hand against the car, crushing his middle and index fingers.",1
An employee was backing an aerial lift out of a hanger when it struck an overhead crane. The employee suffered fractures to the face and the right side of the jaw.,1
"An employee was working with a team to install fiber cable. While the team was pulling the cables and laying them in place, he began cramping and felt overheated. He was hospitalized, suffering from heat exhaustion.",1
"An employee was acting as a spotter to watch cable flowing through a bull wheel. He grabbed the cable to ensure that it was taut in the cradle of the wheel, and his fingers went into the wheel. He suffered an injury to his right middle finger and his left ring and little fingers were amputated.",0
"A forklift was lowering two drill collars onto two boards that had been placed on the ground. An employee was standing in line with the collars, with his right foot positioned to stop them if they rolled off the boards. The collars rolled and pinned his right foot, breaking his ankle.",1
"A nurse slipped and fell, suffering a broken femur.",1
An employee was standing in a hallway when a fleeing patient pushed him. His head struck the floor and he was hospitalized.,1
"On July 14, 2022, an employee was removing tongs from a tubing puller near a well site. The tongs were removed and the pulley was raised while the employee's hand was in a pinch point between a wire cable and a block. The employee suffered a thumb amputation.",0
"An employee was training a new operator to transverse (cross) a casting machine. The machine's wheels were lowered to the transverse track while the employee was reaching under the wheel assembly to remove debris from the track. The wheels crushed the fingers of his right hand, causing amputations to the index, middle, and ring fingertips.",1
"A truck driver was waiting at a freight terminal to receive an intermodal shipping container coming off a vessel. The crane lifting the container failed and the container fell several feet into the back of the flatbed truck. The driver was jostled in the cab, resulting in back pain and loss of feeling in his toes.",1
"An employee was trying to clear built-up filtered metal and grindstone fines from a filtration chamber. When he grabbed the filter paper and pulled on it, it ripped and he fell backward out of the hopper. His head struck the concrete floor. He was hospitalized, suffering from a concussion, bleeding on the brain, and back pain.",1
"An employee was going down ship-style stairs in a turbine building. The employee slipped, fell down the stairs, and suffered a broken lower right leg.",1
"On July 14, 2022, an employee collapsed while walking back to his truck after delivering a package. He was hospitalized, suffering from dehydration.",1
A UPS employee was working as a package car driver sorting/selecting packages in the back of the vehicle and walking to/from delivery points with the packages during extreme heat. The employee was hospitalized for heat exhaustion.,1
"An employee was operating a cardboard baler. While she was pushing some protruding cardboard back into the machine, it broke her fingers and hand and severely cut her right arm.",1
An employee was using a hand winch to open a door on a trommel machine. The cable came off the pulley. The employee was manually placing the cable back onto the pulley when his right index fingertip was amputated in a pinch point.,0
"On July 14, 2022, an employee was trying to free tube material from a mandrel on a pilger. An adjustable wrench slipped and struck the employee, who suffered face and jaw injuries.",1
"An employee was working on patient charts while at a desk. When she stood up, her leg got caught in a phone cord, causing her to fall to the floor and sustain a broken knee.",1
"An employee was pouring iron powder into a blender. The powder ignited and burned the employee's left hand, as well as a finger on his right hand.",1
"While standing on a ladder, an employee was securing a load to a trailer. The employee fell striking his right side against a metal rack. The employee sustained broken ribs and a punctured lung on his right side and was hospitalized.",1
"An employee sat on a foam block, located on a band saw's moving table, while adjusting the foam. The band saw blade lacerated part of the employee's left buttock and left calf.",1
"An employee was unloading 639-pound bundles of plywood from a shipping container using a forklift. The employee aligned the forklift with the right most bundle. He then dismounted the forklift and tilted the braced bundle toward his forklift, easing the bundle down to lay flat. As he turned to get back onto his forklift, the unbraced bundle tipped forward, striking the employee in the lower back and knocking him over. The employee sustained a fracture to the L2 vertebra and was hospitalized.",1
"An employee was standing by a column in a parking garage. A pickup truck turned a corner and ran over her foot, causing a fracture.",1
An employee was cutting a 4-by-4 using a circular saw and lacerated their right leg.,1
An employee was helping install a pump when it caught his left hand. The hand was amputated above the wrist.,0
An employee was putting away a TV pallet when he was knocked to the floor by someone fleeing the store. He suffered a head laceration and a broken left knee.,1
"On July 14, 2022, an employee was loading products on the back of a trailer when the trailer pulled away from the loading dock. The employee tried to jump to the dock but missed, hitting the dock plate and falling to the ground. He broke a bone in his foot and another bone in his heel.",1
"An employee was working on a scissor lift. A piece of equipment struck the scissor lift, causing it to raise. The employee's jaw was caught between the lift's rail and the ceiling, and the employee suffered a crushed jaw and broken teeth.",1
"An employee was transferring cases from a skid to a cart. She fell while turning, landing on the floor and suffering a broken right hip. She was hospitalized.",1
"An employee fell from the elevated platform of a stock picker, landing on the concrete floor 9 feet below and suffering 11 broken ribs on the left side, a broken left wrist, and an injury to the back of the head that required two staples.",1
"An employee was trying to stop a hydraulic leak. The hydraulic line charged while the employee's thumb was over the leaking hose, and high-pressure hydraulic fluid lacerated the employee's thumb.",1
An employee was using a machine to cut various boards for truss orders. The boards on the infeed conveyor decks were out of sequence. The employee was correcting the sequence from the back of the smaller conveyor deck when the conveyor caught his shirt and the infeed table drive shaft lacerated his abdomen.,1
"A field mechanic was disconnecting a hose between a tanker truck and a reclaimer. Hot asphalt oil sprayed onto him from the hose, burning him.",1
An employee was troubleshooting a scroll line (rewind) machine with two other associates when a proximity sensor was activated and the employee's left index fingertip was amputated by the machine.,1
"An employee had just changed out a voltage regulator on a power line and was standing at a job truck. The new regulator started spraying hot oil, which caused second-degree burns to the employee's upper body.",1
"On July 14, 2022, an employee was standing on the top rail of a standard railing barrier guard, using a hand tool to move material in a trough conveyor. The employee was pulled into a head pulley and suffered crush injuries to the arm.",1
"An employee was flipping a 330-pound steel plate. The plate failed to flip and came down on the employee's left hand, crushing it against the plate stand. The employee's ring fingertip was amputated.",0
"At 1:30 p.m. on July 15, 2022, propane leaked from a line between a propane tank and a vaporizer unit. The pilot light on the vaporizer ignited the gas, and an employee suffered multiple burns.",1
"An employee was preparing to load two scissor lifts onto a truck. He had loaded the first one, and was driving the second one up the ramp of the truck, when he and the lift fell off the truck to the ground about 6 feet below. He suffered a broken femur and a broken arm.",1
"While backing up a forklift, an employee was caught between it and a beam. The employee suffered a fingertip amputation.",0
An employee was untwisting aluminum tie wires from a primary wire. The employee contacted a live wire and suffered burns to the upper torso and shoulder area.,1
"An employee's left hand was caught by the butterfly valve inside a bulk line sugar feeder. The machine amputated his index, middle, and ring fingertips at the first knuckle.",1
"An employee was on top of a roof changing a light bulb. The employee fell through the roof to the concrete floor about 25 feet below, suffering a broken neck and three broken back vertebrae.",1
"An employee was bending a piece of metal on a brake press. His right hand was caught between the metal and the brake, and his middle fingertip was amputated.",0
"An employee had just adjusted the sensor eye on a turntable, one step up from the floor. She fell while stepping back down and had to brace herself with her arm, suffering a broken right wrist.",1
"An employee fell while walking down steps, landing on the ground and a metal grating. She suffered fractures to her left fibula, tibia, humerus, and shoulder, as well as three ribs.",1
"An employee was rising from a chair when they tripped over a cord and fell, landing on their right side and suffering a broken hip. The employee was hospitalized.",1
"An employee was sitting on a pipe inside a tank, sandblasting. He put his hose down to slide forward and start sandblasting another area. The hose activated and injected the back of his left leg with sandblasting medium.",1
"An employee was operating a forklift when it struck another forklift. The employee was ejected, then caught under the second forklift. His left hand was amputated and he suffered two collapsed lungs.",1
An employee fell while descending the ladder from a ready-mix truck. The employee landed on the ground and suffered multiple fractures to a hip.,1
"On July 15, 2022, an employee became ill after delivering packages to customers and then returning to his employer's facility. He was hospitalized, suffering from dehydration.",1
An employee was driving an electric cart when his left hand was caught between the cart and a bollard. His arm was broken.,1
A Lowe's employee was moving from a register to a store exit on a scooter. She fell off the scooter and suffered a broken and dislocated ankle. She was hospitalized.,1
"An employee was on a ladder, putting a frozen load into a freezer. She fell from the ladder to the floor and suffered a broken ankle.",1
"On July 15, 2022, a ready-mix truck driver was at a job site pouring concrete. He attached an extension chute to the primary chute (needing to force it into place because of concrete buildup) and began lowering the chutes. His right hand was caught between the two chutes, and the index fingertip was amputated.",0
"An employee's right hand was on the guiding pin of a press. The press was cycled and came down, amputating the first two digits of the employee's hand.",1
An employee was handling a hydraulic skid cylinder using a forklift. His left hand was pinched between the cylinder pad eye and the skid guide slots. He suffered partial amputations to the ring and middle fingers.,1
"An employee slipped and fell to the floor of a milk unloading bay, striking their head on the floor and suffering a head and neck injury.",1
"An employee was pulling a food rack out from a kitchen cooler. The food rack toppled over onto the employee, who suffered an injury to the right leg, a bloodied lip, and an amputation to the right little fingertip below the nail (as well as the loss of the nail itself).",1
"An employee was using a bandsaw to cut meat. His right thumb contacted the sawblade, which lacerated a tendon in the thumb.",1
"Two employees were on top of a 7-foot-1-inch stack of roof trusses. As they moved a truss toward the ground, one side of it slipped, causing one of the employees to fall to the ground. He suffered a fractured T12 vertebra and was paralyzed from the waist down. He was hospitalized.",1
A bank security officer was stabbed in the neck with a knife by a customer resulting in hospitalization.,1
An employee was replacing the corrals on a machine on a line. The employee's index and middle fingers were caught and broken in the machine's rollers; the employee underwent a partial medical amputation to the middle finger.,0
"An employee was using a 20-ton overhead crane to separate 40-foot pieces of angle iron. The pieces on the C-hook shifted, and the employee's left middle finger was caught between them. The fingertip was amputated.",0
An employee was working from a ladder. Wires from the ceiling fell and knocked the employee off balance. The employee fell to the floor and suffered three broken ribs.,1
An employee was operating a forklift when it struck the upright guard of a rack. This caused it to spin about 90 degrees; the employee struck the rack and suffered a leg injury.,1
"An employee was using a band saw to cut metal runners. He was trying to get a piece of metal out of the saw when its blade caught his right index finger, causing the amputation of the fingertip.",0
An employee was assisting a boat captain with bringing in a 4-foot bull shark that had been caught on a fishing line. The employee reached down over the side of the boat and contacted the shark's mouth. The shark's teeth lacerated the employee's right middle finger.,1
"On July 15, 2022, an employee was helping another employee cut down a palm tree with a chainsaw. The first employee was pushing the tree when it fell in an unexpected direction and kicked the chainsaw back. The saw cut the employee's left lower leg, and the employee was hospitalized.",1
An employee's right hand was caught in a 40-inch industrial vacuum hose. The employee suffered contusions and developed a muscular injury from the elbow to the fingers.,1
"An employee was delivering liquid carbon dioxide. A CO2 valve was open, and the release of pressure struck the employee in the chest. The employee fell to the ground and suffered a head laceration.",1
"An employee was walking on the shoulder of a highway with the nearest lane closed, inspecting road signs. A car entered the closed lane, went onto the shoulder, and struck the employee, who suffered a broken left tibia.",1
"An employee was using string to mark an area for asphalt to be laid. As the employee knelt down, a dump truck carrying asphalt backed up and ran over the employee's leg.",1
An employee was using a saw to cut a tree root. The saw slipped and cut the employee above the knee.,1
"A coach was waving in a player during a professional baseball game. The player collided with the coach, who fell and suffered a broken left wrist.",1
"A tugger pulling five carts stopped abruptly at an aisle, and the carts all tipped over. The racks in them dropped onto the floor and struck an employee, who suffered a broken femur and tibia.",1
"An employee was pushing a cart full of merchandise. Her right thumb was pinned between two rolling carts, and she was hospitalized.",1
"An employee was standing at the register, having just completed a transaction. A man pulled a knife and demanded the money from the register. He rushed into the check stand and assaulted the employee. The knife used by the assailant caused cuts to the back of the employee's left hand and the palm of her right hand that required stitches. She was also cut under the chin. The employee was hospitalized.",1
"An employee was performing preventative maintenance to rollers and was rolling their hand along the top of the locked-out rollers. The rollers on an adjacent machine were not locked out and the employee's hand became caught between the last roller and the conveyor system, resulting in a laceration.",1
"An employee was moving a 55-gallon drum a few inches closer to another steel drum. The employee's thumb was caught between the two drums. The bone between the tip of the thumb and the first joint was broken, and the thumb was lacerated on the outside, from the tip to the first knuckle.",1
An employee was operating a machine roller when it crushed two of the employee's fingers. The employee underwent an amputation to one finger and required surgery to the other.,1
"An employee was standing between two conveyors, checking the steel pipes on one of the conveyors. The conveyors activated and caused the pipes to move, resulting in crush injuries to the employee's chest.",1
"An employee was setting a column on a footing. A choker was around the column and forklift being used. The column began to slide, and the employee's right hand was caught between the choker and the column. The employee's middle and ring fingers were amputated at the middle knuckles.",0
A package delivery driver stopped for his break at a shopping center. A man asked about his package and the driver said that he did not have it. An altercation occurred and the employee was shot in the chest.,1
"An employee was working at the front of a store. A customer threw a wine bottle at the employee; it struck the employee in the head, causing a skull fracture.",1
"An employee was helping to change a forklift battery. His left hand was pinched between the battery and its compartment, and his index finger was partially amputated.",0
"An employee was changing the drive belt on a deenergized cooling tower. While moving the belt manually, the employee's little finger became pinched between the belt and a motor pulley. The employee sustained amputation to the finger.",1
"An employee was riding on a reach forklift. When the employee jumped out of the forklift, it ran over his right foot and partially amputated a toe.",1
"An employee was removing a box from a shelf in a hallway. She tripped over the fork of a pallet truck passing through the hallway behind her, fell backward, and landed on the other fork. She suffered a broken left hip and femur and was hospitalized.",1
An employee stepped on a piece of plywood used to cover a ground level opening containing hot water and vapors from a sump pump. The plywood failed and the employee fell into the opening  approximately 3 feet resulting in second and third degree burns to the lower legs.,1
"An employee was cleaning a brownie depositor on a production line. While reaching under the depositor to clear a potential clog, the employee suffered an amputation to a left-hand fingertip at the nailbed.",0
"On July 17, 2022, an employee was turning to walk away from a defibrillation cart when she tripped over the cart's power cord. She fell to the floor and suffered a broken arm and jaw. She was hospitalized",1
"A drill pipe fell. Its joint struck an employee on the right side of the hard hat, then hit his right shoulder. The employee lost consciousness and suffered a laceration to the head and shoulder, fractures to the spine, and a broken shoulder blade.",1
"After turning off the lights in a locker room, an employee hit an open door in the dark, fell against the wall, and then landed on the floor. The employee suffered broken ribs and was hospitalized.",1
"An employee was using an overhead crane to remove a spacer plate from a machine. The plate had been raised over the machine, and the employee was trying to remove the bolts connecting it, when it dropped onto the employee's right hand and broke his thumb.",1
"A unit of wood was not advancing on a conveyor system. An employee cleaned a sensor and the system started moving, causing her right hand to be caught between the wood and the conveyor. She suffered a laceration, contusions, and swelling.",1
An employee was installing rigging on the forks of a front end loader. The forks pinched and fractured the employee's fingers.,1
"An employee tripped on a cord in an aisle, fell to the floor, and suffered two broken vertebrae. The employee was hospitalized.",1
"An employee was operating a pallet jack. As he tried to turn around in an alley, his left foot slipped off the platform and became stuck between the platform and a shelving upright. He suffered a hairline fracture to the ankle. The incident took place during a training activity.",1
An employee was checking around a work area. The employee tripped on a ground rod that was sticking up about 2 inches from the ground and suffered a broken left knee.,1
"An employee was working on a section of overhead piping from a ladder. He fell backward from the ladder, landing on his lower back and then hitting his head against the concrete floor. He suffered contusions to the lower back and head.",1
"An employee was setting forms for concrete wall work. The employee fell from the wall framing, landing on the ground about 8 feet below and suffering a broken right leg.",1
"An employee was working on inventory in an item return area. An electric reach truck backed into the area, and the employee's right ankle was caught between the reach truck and a stationary pallet jack. The employee's ankle was broken.",1
"An employee fell from a steel structure (possibly after being hit in the head by an overhead load), dropping about 6 feet before being caught by fall protection. The employee was hospitalized, having suffered a possible concussion as well as a broken thumb.",1
A pipefitter was aligning two flange bolt holes when his fingertip was caught between two flanges. The fingertip was amputated.,0
"An employee was trying to remove the rollers from the bottom of a lathe using a piece of channel iron and two small jacks. As the employee was jacking up the jacks, the channel iron fell off and struck the employee's right forearm, breaking his radius.",1
A lineman had gone up in a bucket to splice an electrical line that a falling tree had damaged. The employee was electrocuted.,1
"An employee was moving a loaded oven cart weighing about 950 pounds. The cart tipped over toward the employee and fell onto him as he himself fell to the floor. He suffered fractures to the right leg below the knee, and was hospitalized.",1
"An employee was helping explore for a utility line that ran through a trench. As she was digging with a shovel, she fell back into the trench, landing on her back and flipping over. She suffered a broken collarbone and vertebrae.",1
"At 7:00 a.m. on July 18, 2022, an employee was clearing a jam on a notcher. The machine's rotating blades caught her right middle finger, causing an amputation. The machine was not locked out at the time.",0
"An employee had just drilled a hole in an aluminum tent pole. When the employee reached around the chip guard to remove the pole from the jig, the drill bit caught the employee's glove. The employee's right ring finger was lacerated and dislocated, and was amputated at the second knuckle.",0
An employee had been delivering packages and started feeling ill. The employee was hospitalized with heat-related illness.,1
"On July 18, 2022, an employee tripped and fell in a garage, suffering a broken right humerus.",1
"An employee had worked a shift with a work crew on a highway reconstruction project. During the shift, the employees took turns operating a chipping hammer for 10-20 minutes at a time. The employee also used a shovel to remove debris from the area. Toward the end of the shift, the employee experienced symptoms of heat-related illness and was hospitalized.",1
"An employee was getting a roll for the press. He momentarily walked backward and tripped on the leader roll, then hit his head and right shoulder on the concrete floor suffering contusions.",1
"An employee was moving a table with an overhead crane. The sling slipped and the table fell, striking an employee on the left shoulder; the employee then struck a metal coil on the ground. The employee suffered injuries to the left shoulder and ribs.",1
"An employee was removing a light fixture. When the fixture was demolished, a remaining energized wire created an arc flash that burned the employee's left hand, mainly the index finger and thumb.",1
"The banding on a bundle of posts was cut. The bundle collapsed. While an employee tried to stop it, the falling posts pinched the employee's fingertip, leading to an amputation.",1
A tow truck operator was loading a motorcycle onto his truck. It rolled off the truck and struck him.,1
"On July 18, 2022, an employee was carrying chains to hook to a tool building. The employee tripped, and the eye ring for the four-way chains came down onto the eye of the tool building, catching his right index finger and amputating it above the first joint.",0
An employee was unclogging a cyclone feeder machine when its blade amputated three fingertips from the employee's right hand. The machine was not locked out at the time.,1
"An employee was pushing a stock cart full of water cases through a customer area. While avoiding a customer, the employee hit a curb. The cart stopped and fell over. It pulled the employee with it, and its handle struck the employee and injured the area around the employee's spleen.",1
"An employee was monitoring a splice from the unwind to the rewind of a coder machine. A nip point on the machine caught the employee's right hand, causing the amputation of the index finger and a partial amputation of the middle finger.",1
"An employee was grinding slag from the underside of a 2-inch-thick steel plate. The electromagnet holding the plate became deenergized and released the plate, which fell onto the employee's hand, wrist, and arm, causing multiple fractures.",1
An employee was cutting a glazing door bead panel using a miter saw. The saw lacerated the employee's right middle finger resulting in a fingertip amputation.,0
"An employee tripped over a chair while walking out of his office, fell, and suffered a broken hip.",1
An employee was using a band saw to clean flash off an aluminum casting. The blade amputated a finger on the employee's left hand.,0
"An employee sat on a chair and it rolled, causing the employee to fall to the concrete floor and suffer a hip injury.",1
An employee was using a cordless trim saw to cut a small piece of trim. The saw caught his left index finger and amputated it below the second knuckle.,0
"An employee was climbing an 8-foot ladder. He fell from the ladder to the concrete floor, suffering a broken rib, a punctured lung, and a concussion.",1
"An employee was unhitching an air compressor trailer. The employee's left thumb was caught between the trailer and the hitch, and the thumb tip was amputated. The employee was hospitalized for surgery.",1
"An employee tried to jump across a trench for a sewer tie-in, but fell short. His hand was crushed between the trench wall and the object he was carrying. He suffered a severe compound fracture and tissue damage to the hand and fingers.",1
"The employee was using a hooked pole to pull coke battery flue caps out of position so that temperature readings could be taken inside the flue. While he was pulling a cap, he suffered a back strain.",1
An employee was loading a hopper onto a truck. His fingers were crushed and broken in the hopper door.,1
"On July 19, 2022, a temporary employee was trying to cross over a guard rail when his foot slipped on it. His knee struck the other part of the guard rail, and he suffered an open wound to the right leg.",1
"At about 2:00 p.m. on July 19, 2022, an employee was struck by a forklift and suffered injuries to the right arm and leg. The employee was hospitalized.",1
"An employee was standing on a pallet to reach for a box on a shelf. She fell to the ground, suffering a possible fracture to the right hip, and was hospitalized.",1
An employee became overheated while collecting trash from a residential neighborhood.,1
"An employee climbed up a ladder to work on top of a rendering machine. She lost grip on a tool and her right hand hit the machine, fracturing a hand bone.",1
An employee was washing out the rear of a vacuum truck using a fire hose to remove fly ash. A large clump of ash and mud came out of the truck and splashed the employee causing burns to their lower body from the hip down.,1
"An employee was framing an archway. The employee fell from a platform to the floor 15 to 18 feet below and suffered head trauma and a head laceration, as well as bleeding from the ears.",1
"An employee was trying to clear a piece of wood debris from a bandsaw. When he grabbed the wood, the bandsaw pulled it in and the blade caught his hand. He suffered finger amputations.",1
"An employee was trying to clear a piece of wood debris from a bandsaw. The saw pulled the wood in as he held it. He suffered amputations to the right index, middle, ring, and little fingers.",1
"An employee was unfastening a wall from a jig table, which required him to be on the table to remove numerous hold-down screws. While getting off the table, he stepped on a 1-by-4 header board that was not attached to the wall itself. The board broke and he fell to the ground, suffering a broken hip.",1
"An employee was using a forklift to transport a large trash bin and empty it in a dumpster. While outside the forklift, the employee placed their hand on a railing and the trash bin slipped/tilted back, crushing their finger against the railing. Their ring finger was fractured and required surgery and hospitalization.",1
An employee was unloading a truck. A log fell off the truck and struck the employee's lower left leg.,1
"An employee had pushed a shopping cart up to a supermarket entrance door and was reaching for the door handle. She slipped and fell backward, hitting the shopping cart and then breaking her left hip and wrist on the pavement. She was hospitalized.",1
"An employee slipped and fell from a fixed ladder, landing on the ground about 6 feet below and suffering a contusion to the left eye and a laceration to the nose.",1
An employee was adjusting the freshly greased forks for a telehandler. His left hand slipped and his middle finger was smashed against the fork assembly. The finger was medically amputated to the first knuckle.,0
An employee was preparing to scope a project. He stepped into a 2-foot-deep excavation containing rain water that had been heated through contact with hot pipes. He suffered burns to both lower legs and was hospitalized.,1
"An employee was installing foam insulation in houses that were under construction when he began to feel nausea and cramping in his legs. Upon returning from the job site, the employee began to experience additional cramping and nausea, resulting in hospitalization for heat exhaustion and dehydration.",1
An employee was using a jackhammer to chip out concrete when the jackhammer struck an energized electrical line underground. The employee was shocked.,1
"An employee was greasing the blade of a mini excavator. The blade was lowered and crushed the employee's left foot, causing a fracture.",1
"An employee was operating a pallet walker. While trying to back up, she was pinned between the pallet jack and racking in an aisle. She suffered a broken pelvis.",1
"An employee was descending an extension ladder after installing tape on house wrap around a second-floor window. He fell off the ladder and landed on the ground about 10 feet below, landing on dirt and gravel and suffering a fractured lower-back vertebra.",1
"An employee was drilling a rivet that held a safety tether to a pin on a scissor lift handrail. The drill bit came into contact with the safety tether, which wrapped tightly around the employee's left index finger and lacerated it.",1
"Two employees were riding in a side-by-side utility task vehicle (UTV) on a hill, spraying a right-of-way. The UTV began to slide down the hill they were spraying, went out of control, and flipped over. Its roll cage landed on one employee's left leg and broke his knee, tibia, and fibula.",1
An employee was cleaning a compounding tank. The metal sweeper in the tank amputated the tips of her right middle and index fingers.,1
"An employee was turning to reenter a building when weeds caught his foot, causing him to fall to the concrete sidewalk. He suffered a broken hip.",1
"An employee was straightening up after bending over. He hit his head on a ceiling beam and lost consciousness, having suffered a concussion.",1
"An employee was cutting frozen ribs on a band saw. The frozen meat kicked back and jerked the safety plate, which moved his left hand into the path of the blade. The blade cut the tip of his left thumb resulting in a partial amputation.",0
"An employee was working from a rolling baker scaffold about 9 feet above the ground. While trying to move the scaffold, the employee fell to the ground and suffered contusions and lacerations to the head, left shoulder, and right wrist.",1
An employee stepped on a section of the roof that gave out under his feet. He fell through the roof and sustained bruises to the left side of the ribs.,1
An employee was doing pest control work next to an air conditioning unit in a development. A water moccasin bit his right calf.,1
"An employee tripped on a cord dangling off the side of a work table and fell, landing on his side and suffering a broken hip.",1
"An agent had just finished a round of training. While placing his gun in his holster, he shot himself in the thigh.",1
"An employee was driving a golf cart when it went off the cart path and flipped on its side, landing on the employee. The employee sustained a fractured left ankle, a bruised hip, a sprained right ankle, and a laceration to the left arm.",1
"An employee was loading a rail onto a measuring table. The bottom of the rail caught on the table, causing the end that was already on the table to slide off and fall about 5 inches. The employee's left ring finger was caught between the rail and the table and partially amputated.",0
"On July 19, 2022, an employee was closing the lift gate on a flatbed truck. The lift gate crushed and amputated the tip of the employee's left middle finger.",0
An employee was a passenger in a utility task vehicle (UTV) when it overturned.,1
"An employee was leveling peat moss in a bed of mushroom plants. When they stepped on an end board, the end board shifted and the employee fell from the second level to the concrete floor. The employee sustained a concussion and pain in their neck, back, and shoulder. The employee was hospitalized.",1
An employee was driving a pallet jack when they were struck by a dock truck that had two pallets on the forks. The injured employee sustained a laceration.,1
"On July 20, 2022, at approximately 1:25 AM, an employee was sorting packages in the sorting aisle when he began to experience heat exhaustion symptoms. The employee was hospitalized.",1
"An employee was welding in a 96-inch pipe. The employee was hospitalized, suffering from dehydration and heat-related injury.",1
An employee was using a demolition saw to cut a piece of pipe. He was cutting the pipe while two other employees held down both sides; a 6-by-6 piece of wood was being used under the pipe to create a crown so the pipe would not pinch the blade. The saw kicked back and lacerated his face from the jawline to the corner of the upper lip.,1
"A city mail carrier was hospitalized after finishing his shift early, suffering from dehydration.",1
"On July 20, 2022, an employee had been making repairs to a chicken coop, replacing windows and wires. At approximately 1:30 PM, the employee was hospitalized after experiencing heat stress illness.",1
"An employee developed cramps in the right calf while cleaning up a job site. His symptoms worsened and he was then hospitalized, suffering from heat exhaustion, low blood sodium, and heat-related muscular injury.",1
"An employee was installing a hydraulic cylinder on a trailer. The trailer shifted on the assembly line and the cylinder pinched the employee's left thumb, causing a partial amputation.",0
"The injured employee was getting ready to leave for the day and finishing some of the closing duties. While walking to the lunch room, the injured employee tripped over another employee's foot and fell sustaining a pelvis injury.",1
An employee was working on the main electrical distribution panel of a school. The employee was shocked and suffered multiple rib fractures due to CPR compressions. The employee was hospitalized.,1
"An employee was restacking plywood by hand outdoors. The wind lifted a sheet of plywood from a stack next to him, and it struck him in the head.",1
An employee experienced symptoms of dehydration while delivering packages and developed a heat related illness.,1
"An employee was holding a tong that was gripping a string of pipe that was within a mouse hole on a drilling rig. The crew was trying to remove 2 of the 3 sections of pipe from a string. On the third attempt to attach a pipe spinner unit, the pipe spinner unit impacted the employee's left thumb. The thumb was broken and lacerated.",1
"An employee became ill while delivering packages on his route. The employee was hospitalized, suffering from heat-related injuries.",1
An employee was cleaning a machine when it amputated one of the employee's fingers.,1
"An employee was carrying pipe slips across the rig floor to place them on the drill string in the rig floor when his right foot slipped into the floor opening and he fell. The pipe slips fell on his ankle causing a fracture. Additionally, the employee's knee was dislocated.",1
"For 10 hours, an employee was on a scaffold removing insulation from a large diameter condensation tank to replace it. Later that day the employee experienced cramping and was hospitalized for potential heat exhaustion.",1
"Two employees were setting up a 40-foot ladder to access a building's roof. The top of the ladder contacted a live power line, and both employees were shocked. One of them suffered electrical burns to his foot and was hospitalized.",1
An employee was watching others work. The employee reached toward a hose they were handling and suffered a torn right bicep ligament.,1
An employee was cutting aluminum held in a hydraulic vise. The employee was trying to move the product when the vise crushed the tip of their right thumb. The thumb tip was amputated.,1
"On 7/20/2022, an employee was working on the loading dock. While crossing between dock doors, his head stuck against a metal pole resulting in an injury to the left eye.",1
"An employee was operating a powered industrial truck (PIT). While maneuvering the PIT into a parked position, the employee's right foot became caught between the PIT and a parking bumper. The employee sustained a foot injury.",1
"An employee was stepping from a ladder to an elevated work platform, when they slipped and fell 22 feet to the ground. The employee sustained a fractured right leg that required hospitalization.",1
"A temporary employee fell from an electric pallet jack to the floor, suffering a head injury that required stitches and hospitalization.",1
An employee was working on a sump pump. The employee's right leg slipped into a pit full of boiling water and was burned.,1
"After loading material on a truck with a crane, an employee was removing the plate hooks from the material. The material shifted and pinched the employee's left ring finger against a plate hook. The tip of the finger was amputated.",0
An employee was retrieving rebar when he was struck in the back by the bucket of an excavator and suffered a contusion.,1
An employee was repairing a truck when the wrench slipped out of his hand and struck him around the left eye. He suffered a globe rupture to the eye.,1
An employee was erecting a frame-supported scaffold in a shaft. The employee fell approximately 15 feet and sustained fractures to the lower spine requiring hospitalization.,1
An employee was using a band saw to cut meat. The saw amputated his left middle finger at the first knuckle.,0
"An employee was standing next to a stack of pallets suspended inches off the asphalt ground by a forklift. The employee's left foot was caught between the pallets and the ground, causing dislocations to bones in the foot.",1
"After delivering packages, an employee developed dehydration and heat-related illness.",1
An employee was looking through bins when a forklift backed into her and broke her ankle.,1
"An employee was running a CNC tube bender. The bending clamp came in to grab the tube, and the employee's left index finger became caught between the clamp and the tube while it was compressed. The employee's fingertip was amputated.",1
"An employee was working aloft in a bucket truck, adjusting the rubber insulating blanket covering an energized mechanized jumper conductor. An arc flash occurred, causing second degree burns to the employee's face and neck.",1
"On July 20, 2022, an employee was cutting the bands on a pallet of products on a scissor jack. A stack of product fell from the pallet and struck the employee. The employee was hospitalized with a fracture and dislocation of the left leg.",1
An employee was cleaning a conveyor belt with a sponge when they sustained amputation of their left index finger.,0
"An employee had been conducting a lawn care application and experienced dehydration, heat stroke, and heat syncope.",1
"On July 20, 2022, at 11:30 AM, the injured employee was preparing to set up a dump trailer in the wash bay so the water could drain out of the dump bed. A co-worker lifted the dump trailer at the corner so the injured employee could set in place 5-6-inch long 2-inch square safety blocks. As the employee placed a safety block on the trailer frame under the raised dump bed, it dropped off the forklift fork onto their right index finger. The finger was fractured and about half of the flesh from the backside of the finger was removed without bone loss.",1
An employee had been shaping cores in the former. The employee was removing a jammed die from the wedge using a tool. The former die closed once it was removed and amputated the employee's left little finger.,0
"During water well drilling, an employee was setting a section of drilling pipe when the drilling pipe section above dropped and amputated his left thumb and index, middle, and ring fingertips.",1
An employee was removing dough from the divider ram when the machine restarted causing crush injuries to the employee's right middle and index fingertips. The index fingertip was amputated.,0
"An employee was retrieving a rake near a loader truck. The truck's outrigger came down on top of his right foot, causing broken toes and soft tissue damage.",1
An employee developed heat-related illness while collecting trash.,1
An employee was cutting a piece of pipe with a concrete saw when the guard handle kicked back and lacerated his face.,1
A border patrol trainee suffered a heat-related muscle injury and was hospitalized.,1
An employee was changing a differential in a tractor when it fell and crushed his hand. He was hospitalized.,1
A temporary employee lost her balance and fell while turning. Her right ankle was broken.,1
An employee was putting food ingredients into a blender. The blender amputated his right index fingertip and lacerated his right middle finger.,1
"An employee was helping to fell a dead tree. As the tree was falling, a branch snapped off, fell, and struck the employee causing neck and back trauma.",1
"An employee was standing on a ladder, mounting a television 10 feet up on a wall. He fell from the ladder to the floor, suffering shoulder and left arm injuries.",1
"An employee was trying to fix a seal on top of a truck. He slipped and fell off the truck, landing on the ground and suffering a dislocated hip.",1
"An employee was emptying a dump truck and using a hammer to knock the asphalt out. A front-end loader struck her, its back section severely lacerating her upper right leg.",1
"On July 21, 2022, an employee developed heat exhaustion while building roof trusses. After completing their shift, the employee was hospitalized.",1
"An employee was driving a forklift during his last day of forklift training. While operating the forklift, the employee collided with another forklift resulting in a left leg laceration.",1
An employee developed heat- and dehydration-related illness while setting poles.,1
An employee was operating an excavator machine to load a steel joint pipe onto a trailer. A lever was moved that caused the pipe to rotate toward the machine instead of away from it. The employee was trying to prevent the pipe from rolling into the cab when it pinned his right arm against the machine and broke it.,1
"On July 21, 2022, employees were working to set up a calendar machine for new product. The injured employee was in training and entered the front of the calendar oven to feed material through the rollers to a second employee. While feeding materials through the rollers, the machine started pulling the injured employee's right arm into the chill roller and idler arm that was adjacent to a heating roller. The employee suffered third-degree burns to their right forearm.",1
An employee was replacing/repairing instrumentation on top of a storage tank. The employee fell from the tank onto the concrete secondary containment structure 12-15 feet below and suffered fractured back vertebrae.,1
"On July 21, 2022, an employee was compressing suspension springs in a hydraulic
spring press machine. He had compressed two springs that morning and while compressing the third spring, suffered a fingertip amputation when the retaining bolt that holds the spring in its compressed position failed and the spring expanded.",0
"The winch line of a rear-load garbage truck was tightened, and the fingers on an employee's left hand were pinched behind the safety latch of a hook on the line resulting in an amputation.",0
"An employee was checking a fuse in an electrical box. An arc flash caused second-degree burns to the employee's arm, neck, and face.",1
"An employee was bent over, picking up wood, when a forklift backed out of a semi trailer and ran over the employee's right ankle. The employee's ankle was broken.",1
An employee was unloading a frozen food truck when they slipped and fell on the ground.,1
An employee was operating a table saw when the blade grabbed his left glove and pulled his hand toward the blade. The blade amputated a finger and severely injured three other fingers.,1
An employee was working in the upper yard securing preformed concrete slabs for transport on an easel trailer. The employee was sitting on the top crossmember of the easel trailer and fell more than 6 feet through the middle to the crossmembers below resulting in lacerations to his head and leg. The employee may have lost consciousness prior to falling due to the heat.,1
"Two employees were pulling wire through a drop ceiling. The wire got stuck on something in the ceiling, then came loose as one of the employees was pulling on it. The slack caused him to lose his balance, and he grabbed the metal framing of the drop ceiling to avoid falling. The framing lacerated his right index, middle, and ring fingers, damaging a tendon in the middle finger.",1
"On the morning of July 21, 2022, two employees were at a stacked rig, removing 4-inch high-pressure piping. They began to break the nuts loose on the saddle clamp bolts under the valve tree. As they were breaking loose the last nut, the piping suddenly rotated in the saddle clamp and the transducer valve tree (about 4 feet tall, weighing 250 pounds) pivoted 90 degrees toward the ground and landed on one of the employees. The hammer union ears at the top of the valve tree struck him in the middle of the shoulder and back, causing contusions.",1
"An employee was rolling out a blind flange to release white liquor from a pipe. Residual white liquor splashed under the employee's face shield, causing caustic burns to the employee's face and neck.",1
"An employee was using a rope to pull a sick calf out of a pen. The calf ran after it was roped, and the employee's right thumb got caught between the rope and the saddle resulting in partial amputation.",1
An employee was walking into a cooler to get bottled water when she slipped on a wet floor that had recently been mopped. The employee impacted the floor and fractured her upper left leg.,1
A truck driver was delivering a load of laminate desk tops to a store. The load had shifted during transport and the top pallet fell and struck the driver resulting in hospitalization for an injury to the pelvis.,1
"On 7/21/2022, at 11:10 AM, an employee was working to remove a label that was stuck in a CTC machine when his right middle finger was partially amputated by the machine.",1
An employee was standing on a pile of sand when he lost balance. He reached out as he fell and his finger became pinched between a belt and pulley on running equipment. The employee's middle fingertip was amputated.,0
"An employee was working on an assembly line. They stepped into a 4- to 6-inch deep gap/hole, lost balance and fell, striking their side against the machine.",1
"An employee was on scaffolding, paining the outside of a rental property. He fell from the scaffolding to the ground 12 feet below and suffered fractures to the right heel and a lower-back vertebra.",1
A temporary employee was operating a machine when part of the machine pushed through a piece of sheet metal that caused an amputation to the employee's right index finger.,0
"An employee was using a portable ladder to position and tack-weld steel panels onto sections of a ship. A panel was suspended from an overhead crane, and the employee was positioning it. As he was ratcheting the panel, it pinched his thumb against the ladder. The tip of the thumb was amputated above the nail.",0
"While walking in the office, an employee tripped and fell on the floor. The employee's ankle was twisted and required surgery.",1
"On 7/22/2022, an employee was being trained to use a hydraulic brake press. The employee noted a film was on the material and reached to remove the film on the downstroke cycle of the press. The employee sustained crushing injuries, including fractures, to four fingers on the left hand requiring hospitalization and surgery.",1
"On July 22, 2022, an employee tripped and fell over a sharp chain. The chain lacerated his right shin.",1
An employee was using a manual pallet jack to pick orders when they were struck by an electric forklift. The employee sustained a compound fracture to the right leg requiring hospitalization and surgery.,1
"An employee was spray-painting a bridge from a lift truck. He fell from the truck to the ground, breaking his arm and six ribs.",1
An employee was working above a water treatment plant that was under construction. The employee was installing 2 x 4s for the concrete formwork. The employee was wearing a fall protection harness with a double self retracting lifeline with two separate snap hooks attached to the D ring on the backside of the harness. There were two snap hooks attached to a rebar chain assembly to each of the D rings on the front side of the harness that transitioned to one snap hook. The employee climbed up to the top of the water treatment plant using a ladder that was located on the exterior wall. The employee then walked on top of the plant and hooked the snap hook located on the frontside of the harness to the anchorage connector that was attached to an overhang bracket. The employee then placed his feet on the vertical wall and lowered himself down and was suspended. The bolt that was holding the anchorage connector to the overhang bracket then broke off. The employee was not able to attach his second snap hook before falling 18 feet to the ground below. The employee sustained facial fractures and well as head and lower spine fractures.,1
An employee was standing next to a vertical bagging machine and an incline conveyor. A pallet jack was entering the area and the employee stepped back out of the way. The rear of the pallet jack pushed an empty pallet toward the employee's feet and her left ankle was pushed into the bottom  frame of the bagger machine. She sustained lacerations and an Achilles tendon injury that required surgery.,1
"An employee was working on a stand-up packing machine. As the employee reached for a hanging pouch, the machine started up and amputated her right middle and index fingers.",1
An employee was punched in the face during a workplace altercation with another employee.,1
"An employee was training on a reach truck. While turning, his foot went outside of the compartment and his left leg was pinned between the reach truck and racking. The employee sustained a fractured leg requiring hospitalization.",1
"An employee was closing the rear door of an 18-wheeler truck. It closed on the employee's right ring finger, crushing the tip and causing a laceration and fracture.",1
"On July 22, 2022, an employee was operating a forklift in the warehouse. He was ejected while taking a corner and the forklift pinned his left foot against a storage rack. The employee sustained a laceration to his left foot.",1
"An employee was coupling a trailer with a ball hitch. When he repositioned himself he adjusted his hand, and the hitch dropped into place and amputated the tip of his finger.",0
Automatic doors struck an employee as they closed. She fell to the floor and suffered a broken hip.,1
An employee was working inside a freight truck and had climbed onto the freight. The employee slipped and fell 2-3 feet from the freight to the floor of the trailer. The employee was hospitalized with a fractured right femur and required hip surgery.,1
"An employee was checking samples of cups for quality in a building without air conditioning. The employee developed dizziness and cramps in the right leg and toe and was hospitalized, suffering from dehydration and heat exhaustion.",1
"An longshoreman was walking up a gangway to board a moored ship to begin his shift. Another vessel was passing and caused the moored ship to break from the dock (the mooring lines broke). The longshoreman began to run and the mooring lines wrapped around him, picked him up, and dropped him onto the right side of his body. He sustained a broken upper right femur and a dislocated right hip requiring hospitalization and surgery.",1
"An employee was using an extruder machine when it punctured his left hand, causing the amputation of a fingertip.",0
"An employee was working on a forming machine in a hot area. After developing pain in the abdomen, dizziness, and cramps in the hands and legs, the employee was hospitalized, suffering from heat-related illness.",1
"An employee was operating an overhead crane remotely. The load, a 5,000-pound bundle of aluminum bars, struck the employee's right arm. The employee was hospitalized.",1
An employee suffered a fingertip amputation while operating a forming press.,0
An employee was assaulted in a parking lot. She was hospitalized.,1
A yard crew was unhooking a trailer. An employee was pulling pins inside the hitch when the hitch moved and pinched his fingers. He suffered an amputation to the left index fingertip.,0
An employee fell from an upper canopy while cleaning windows. The employee impacted the ground and sustained a fractured femur.,1
"An employee was working with a mixer. The employee fell through a floor hole to a platform 20 feet below the mixer, suffering a fractured pelvis and fractured vertebrae. The employee was hospitalized.",1
"An employee tripped on a slope while carrying a box of supplies. Her leg buckled and she fell, the box landing on her leg. She suffered a leg fracture and was hospitalized.",1
"On July 22, 2022, an employee became dizzy while using a weed trimmer. He was hospitalized, suffering from heat exhaustion.",1
"An employee was pushing a cart. Parts fell from the cart onto her leg, causing broken bones.",1
"On July 23, 2022, an employee was walking to the parking lot to assist a customer when they tripped over a curb and fell to the ground. The employee sustained a broken metatarsal in their right foot, a head contusion, a sprained left knee, a sprained right wrist, and a laceration to the nose. The employee was hospitalized.",1
"An employee fell down an elevator shaft, landing on concrete and suffered a broken leg.",1
An employee was unlocking a shoe on a train car. The employee fell from a stationary rail car to the ground and required hospitalization for a fractured right elbow.,1
"An employee was using a bulldozer to smooth a graded area. The bulldozer backed off a sloped hill and landed on its rear; the employee suffered a laceration, a contusion, and blunt trauma to the head.",1
An employee broke a blood vessel in their eye while lifting pans from a table to a cart.,1
"An employee had just set a feed box on a truck. When the employee reached back to move something, the employee's left index finger was pinched between the feed box and the truck. The fingertip was amputated.",0
An employee suffered a partial finger amputation while troubleshooting equipment.,1
"An employee was climbing a closed A-frame ladder to reach the top of an oil storage tank. The ladder slipped and he fell to the ground, suffering a back injury.",1
"At about 8:30 p.m., on July 23, 2022, an employee was carrying a chair into a building when her right leg slipped in a puddle of water. She fell to the pavement, suffering a broken left hip. She was hospitalized.",1
"An employee fell to the floor and suffered a broken jaw, as well as a tongue laceration that required stitches.",1
"An employee was moving a motor into position when their finger was pinched under the motor, resulting in a fingertip amputation on the left hand.",1
"An employee was changing a cylinder on a combine tractor. The cylinder reel slipped and dropped onto the employee's left hand, amputating the thumb and breaking the middle finger.",0
"On the night of July 23, 2022, an employee was exposed to leaking ammonia and suffered respiratory irritation. The employee was hospitalized.",1
An employee was pulling a spud pin when a handrail pinched his hand.,1
An employee was cleaning a conveyor belt when his left middle finger was pinched between the belt and a metal housing (lifted so he could clean the belt). He suffered a partial amputation to the finger.,1
"An employee was climbing down a dump truck's ladder. He fell from the ladder to the ground, breaking his tibia and fibula, and was hospitalized.",1
An employee was unloading carts at the cross dock area when their left middle finger was caught between a cart and a door hinge. The fingertip was amputated.,1
"An employee was power-washing the area around a filter. The filter medium was pressurized and released; hot water and steam struck the employee, who suffered burns to the left arm (from the wrist to just above the elbow) and the back of the neck.",1
"An employee had been polishing a rifle barrel in a profiling machine. When the employee reversed the spindle to remove the barrel, the barrel flew out of the machine and hit him in the ribs. He suffered a laceration to the ribcage, broken ribs, and a punctured lung.",1
"A temporary employee was walking backward when they were struck by a reversing forklift. The employee was knocked down and the forklift subsequently ran over the employee's left leg, fracturing it.",1
An employee was working on a glass forming machine and sustained heat cramps/heat exhaustion. The employee was hospitalized.,1
"An employee was working on a dead electrical line, cutting a mechanical jumper. The tail of the dead mechanical jumper contacted a dead-end shoe, resulting in an arc flash that burned the employee's chest and abdomen. The employee was hospitalized.",1
"An employee was carrying a door seal down a flight of stairs. He fell onto the stairs, suffering a laceration and a fracture to the forehead. He was hospitalized.",1
"At 1:15 p.m. on July 25, 2022, an employee was trying to unclog a line in a machine center. The machine activated and amputated his left middle fingertip.",1
An employee was trying to start a jet ski. It backfired and produced a wave of heat that caused first- and second-degree burns to the employee's face and shoulder.,1
"An employee was using a rear load trash truck to empty an 800-pound cardboard collection dumpster. The dumpster over tilted and then rested against the truck. The employee pulled the dumpster back creating a free fall until the dumpster was caught by the lifting cable. The dumpster struck the employee on the left shoulder before coming to rest on the cable, resulting in a shoulder fracture and dislocation. The employee was hospitalized.",1
An employee fell while grabbing parts in a warehouse. The employee suffered a head injury.,1
"An employee tripped while walking in a hallway, falling to the floor and suffering a broken leg.",1
"On July 25, 2022, a powered industrial vehicle was backing out of a cooler and struck an employee walking toward the exit. The injured employee suffered a fractured lower left leg and a deep laceration to the left ankle.",1
"An employee was about to change out the choke parts to fix a leaking choke on the belly dump of a gas production unit (GPU). While the choke was being unbolted, pressure came through it, blowing the employee backward and causing lacerations and broken bones in their face.",1
"An employee was adjusting push-back rack rollers in a freezer to remove a jam. When he released three of the rollers, the fourth crushed his finger. The tip of his little finger was amputated.",1
An employee was performing production work on a tapping machine when their left index finger was lacerated by the bit (a 4-flute plug style tap). The employee's finger was surgically amputated at the hospital.,1
An employee was putting a new part into a brake press. The machine was engaged and amputated the employee's right index fingertip.,1
"An employee was cleaning a fryer. On unplugging the heater box, the employee was shocked.",1
An employee was using a metal-cutting bandsaw to cut square metal tubing. The saw amputated the tips of the employee's left index and middle fingers.,0
"On July 25, 2022, an employee was building bundles of lumber in the lumberyard when they began to experience symptoms of heat stress.",1
"An employee was climbing a ladder on the back of a semi-truck trailer. She went to grab the handle, and her foot slipped and she fell 4 to 5 feet onto the concrete ground. The employee was hospitalized with a fractured left wrist.",1
"At 9:00 a.m. on July 25, 2022, two employees were on the top of an elevator car checking for oil on the ropes. The car began to descend. One employee reached down to grab a rag and the elevator ropes pulled his hand into the sheave. He suffered multiple finger lacerations.",1
"An employee was working on hot water pipes. Hot water was released from a pipe and burned the employee's abdomen, stomach, and legs.",1
"An employee was unhooking a hose he had been using to fill drums with sodium hydroxide. When the hose was unhooked, a release of pressure caused the chemical to spray onto his face and burn his mouth and lips.",1
"Two employees were working from a scaffold at a residential home, installing a 12-to-14-foot beam at a height of about 16 feet. The beam slipped and knocked the employees off the scaffold, causing them to land on a concrete slab below. One employee sustained a sprained ankle and multiple broken ribs but was not hospitalized. The other employee was hospitalized for a skull fracture, brain swelling, as well as a fractured right forearm.",1
An employee fell from a scaffold to the concrete ground. The employee suffered head trauma and was hospitalized.,1
"An employee was struck by a forklift. The employee's left foot was caught between the rear wheel and the wheel well of the forklift, and the employee suffered a fracture and dislocation to the midfoot and a laceration to the ankle.",1
"An employee was measuring the depth of a hole. The auger was being withdrawn from the hole and when the equipment stopped, a piece of spoil broke free from the auger and struck the employee's head. The employee sustained bruising and soft tissue injuries to the tailbone as well as a concussion.",1
An employee (mechanic trainee) was repairing the shoe push rod housing on a press. His hand was caught in the flywheel and he suffered broken bones and amputations. All of the fingers except the index finger were reattached. The press was not locked out at the time.,1
"At about 12:30 a.m. on July 25, 2022, an employee was performing preventative maintenance on one of the conveyor motors on a manufacturing line. The employee was trying to determine belt tension when the tip of their right index finger was caught between the gear and the belt of the conveyor motor. The fingertip was amputated.",0
An employee fell off the lift on the back of a delivery truck and struck his head on the ground approximately 4 feet below. The employee sustained a head injury including memory loss.,1
An employee was signaling for the rotation of a rail car when he was pinned between the car and an I-beam. He suffered a fractured pelvis.,1
"At 1:00 p.m. on July 26, 2022, an employee was three rungs from the top of an 8-foot ladder. The ladder shifted and he fell to the ground, breaking his left leg.",1
"An employee was working from a 10-foot step ladder, cutting a piece of crown molding. He fell from the ladder to the tile floor and suffered three broken vertebrae.",1
"An employee was plugging in refrigerator containers on a container vessel. He was climbing down from one level to another when he fell through an open hatch. He landed 8-10 feet below and suffered back, neck, and head injuries as well as broken ribs.",1
"During an attempted store robbery, the suspect sprayed pepper spray on a customer. An employee breathed the pepper spray fumes, developed breathing problems, and was hospitalized.",1
"At about 2:30 p.m. on July 26, 2022, a forklift struck an employee's left foot while backing up. The foot was injured and the employee was hospitalized.",1
"An employee was standing next to a transfer table which lifts tubing into the area to be processed and cut by the horizontal band saw. A 48-foot-long piece of 6-by-6 tube that was on the transfer table struck his right arm, resulting in an injury.",1
"An employee was processing material on a roll mill. The machine jammed, then started to make a cut as the employee was trying to clear the jam. Its die crushed the employee's arm.",1
"An employee had left his truck to look at the road. A dog jumped a fence; as the employee turned to escape it, his foot got caught in the sand he was standing on. The twisting motion broke his femur.",1
"An employee was working in a warehouse selecting packages to sort into a bin. Upon reaching for a package on the conveyor belt, the employee turned to step and tripped and fell, resulting in an injury to the middle back.",1
An employee fell down the staircase of a gantry crane and suffered a broken left ankle.,1
"An employee was trying to hang a battery pack fixture. While removing an existing flex whip to check for the circuit tag number (and thus be able to de-energize the circuit), the employee was shocked and fell from the third or fourth rung of an 8-foot ladder. The employee suffered back pain and a head laceration.",1
"An employee used a syringe to administer a vaccine to a cow in its neck. Upon completion, he moved the syringe to his left hand in order to use his right hand to mark the cow with paint signifying it was vaccinated. He reached to paint the cow with his right hand and sustained a needlestick in the left thigh. The employee was hospitalized with swelling of the thigh.",1
"An employee was trying release a stuck lift gate on a tractor trailer. When he tried to push it out, it jerked back and its arm caught his left index finger against the plate. The fingertip was amputated.",0
"An employee was operating a four-wheeler. The employee tried to turn to avoid a train approaching at about 5 miles per hour; the four-wheeler's tires hung up on the tracks, and the train struck its front tires and caused it to roll. The employee suffered scrapes along the side of his torso and upper leg.",1
"An employee was bending over tying rebar. He lost his balance with his feet between tied pieces of rebar and fell into a seated position, sustaining an injury that caused back pain and numbness in his legs and feet.",1
"An employee was unloading a container from an aircraft. The container rolled over his foot, crushing his toes and the top of the foot. He was hospitalized.",1
"An employee was ripping paper off a roll. He tripped over a process belt, struck a metal toeboard on a walkway, and landed on his left side. He developed a possible hematoma on his left side and was hospitalized.",1
"An employee was operating a pallet jack. The employee fell off, landing on the ground and suffering a broken arm.",1
An employee was using a saw to cut meat when it amputated his left index fingertip.,0
"An employee was operating a golf cart with a package in the front seat. The package became wedged on the gas pedal as the employee drove up a ramp, causing the cart to go out of control and strike some racking inside a distribution center. The employee suffered three fractures in the pelvis area.",1
"An employee was on an 8-foot ladder when it fell, causing him to fall and hit his head on the ground. He suffered a head injury.",1
"An employee was attempting to remove the forks from the carriage of a non-functioning forklift. The carriage, along with the fork being removed, fell to the ground about a foot below, landing on the employee's gloved right hand. His index, middle, and ring fingertips were caught under the fork and degloved. The fingertips were medically amputated.",0
"An employee was standing on the sidewalk by the front of a store. A customer's vehicle struck the employee, who suffered fractures to two thoracic vertebrae.",1
An employee was stripping a metal concrete form. The employee's leg was struck and pinned against the concrete slab.,1
"At 12:45 a.m. on July 26, 2022, an employee was trying to connect an air line to a port behind a vacuum press. A water hose that supplied 190-degree water to the press ruptured at a point about 2 1/2 feet off the floor. It sprayed hot water on the employee, knocking him down and causing second-degree burns from his lower torso down to just below his knees.",1
An employee was working on the gears inside a row bagger. The machine was turned on and it amputated the tip of the employee's right middle finger. It was not locked/tagged out at the time.,0
"An employee was lifting a material lift with a walk-behind PIT when it began to fall. The employee tried to stop the equipment from falling when it fell on top of the employee, resulting in bruises and soreness.",1
An employee's middle finger was caught in a hinge on a control panel. The fingertip was partially amputated.,0
"On July 27, 2022, at approximately 2:45 p.m., an iron worker fell approximately 4' 10"" to the ground while removing existing rebar in a form wall. The employee lost consciousness and sustained four broken ribs. The employee was hospitalized.",1
"An employee was making a delivery. After changing a flat tire on the delivery vehicle, the employee suffered syncope due to heat stress and was hospitalized.",1
An employee was cutting a 2-by-6 with an electric saw. The saw kicked back and cut his left ring and little fingers. The ring finger was amputated.,0
"While driving to her work site in an apartment complex, an employee was caught in a crossfire of gunshots being fired between unknown third parties in the parking lot. The employee sustained gunshot wounds to the chin, forearm and buttocks.",1
An employee was using a turret forklift to removing a box from the second level of a rack. The box slipped and hit the employee's chest causing a contusion.,1
An employee was stung by yellowjackets while delivering a package.,1
"An employee was working in the attic at a customer's residence. He squatted down, and as he stood up he felt lightheaded and had blurred vision. He fell, striking his head on a floor beam. The employee was hospitalized.",1
A work crew was installing exterior wooden frame walls on the third floor. The employees were lifting the wall in place by hand when it fell on the injured employee. The injured employee sustained chest contusions.,1
"At about 5:45 a.m. on July 27, 2022, an Autocar employee was driving a stand-up forklift in reverse when it began to slide. It crashed into a rack, and the employee's foot was caught between the forklift and the rack. She suffered a broken ankle and heel and was hospitalized.",1
"An employee was setting up a bagger machine. As the employee was pulling the bottom of the second bag from under the doors, it caught and then pulled the employee's hand back up into the machine's jaws. The employee suffered an amputation to the tip of the thumb.",0
"On July 27, 2022, an employee was spot-welding when the welding machine came down on his right index fingertip. He was hospitalized and the fingertip was amputated.",1
An employee was working on the rig floor when they began to experience dizziness and cramping in their legs and arms due to dehydration and heat stress. The employee was hospitalized.,1
"An employee was trying to remove a part from a mold. The lid of the mold struck his head, and he suffered a spine compression/bruise. He was hospitalized.",1
"An employee was operating a utility vehicle to apply lawn care treatments when they were struck by another vehicle and thrown from the utility vehicle. The employee suffered multiple fractures to their ribs, broken orbital bones, a broken nose, and lacerations and abrasions to multiple body parts.",1
"On July 27, 2022, an employee was cleaning a hopper. The employee was pushing product through the exit drain when the push rod caught the employee's right middle finger, causing a fingertip amputation.",0
"An employee was standing at the back of a hopper, operating the sweep blades. The sweep blade amputated his right big toe and the two toes next to it.",1
"On July 27, 2022, an employee was struck by a motor grader while accessing a skid steer. The grader's tire lacerated the employee's right calf.",1
An employee was observing as steel was rolled. A nylon plastic mandrel snapped and hit the employee in the right lower leg resulting in a fracture. The employee was hospitalized.,1
"An employee was holding a dock piling steady. A steel cable broke, causing a platform swivel crane to fail. The steel boom released and struck the top right side of the employee's head, causing an open laceration.",1
"An employee was using a screwdriver to scrape wax off a pump. His hand was pulled into the stuffing box, and the rod inside the box broke his thumb and caused amputations to his fingertips.",1
An employee was removing a part from a vertical flow forming machine. The machine tooling pinched three of his fingers and amputated the fingertips.,0
"Three employees were installing water service lines. One of them was lying on the ground, holding a water line to stabilize it, when an excavator crushed his leg. He was hospitalized.",1
An employee was cutting a 2-by-4 with a chop saw. The sawblade amputated the employee's left middle and ring fingers.,1
"An employee was working with a patient by their bed. The cable for an alarm caught the employee's leg, causing the employee to fall to the floor and suffer a broken hip.",1
"An employee fell in a hallway, suffering a broken left hip.",1
"An employee was walking around a trailer. He fell to the ground, suffering a broken left hip.",1
"An employee was working on a trailer when he lost his balance and fell to the ground, landing on his right side and suffering two broken ribs and a punctured lung.",1
An employee was using an industrial bending machine to bend steel plates. The machine actuated while his left index finger was in the tooling. The finger was partially amputated.,1
"An employee was walking down stairs when their right leg buckled, resulting in a torn tendon in their right knee.",1
"An employee was about to move a fall protection cart. When he released the brake, the handle bounced back and struck his forehead. He sustained a laceration and a possible fracture.",1
An employee was installing oil drilling tubing when his middle finger was caught between a ram and a blowout preventer. The fingertip was amputated.,0
An employee fell while walking between buildings. The employee was hospitalized.,1
"An employee was feeding cable into a hydraulic shear. The shear caused fractures and lacerations to the employee's right middle, ring, and little fingers.",1
"On July 27, 2022, at 11:45 a.m., an employee was walking near a machine while returning to her work area when she fell to the concrete floor, resulting in a broken right femur.",1
An employee fell off a ladder while working on ceiling tiles. The employee landed on the ground and suffered broken ribs and a broken wrist.,1
An employee was struck by debris falling from an excavator bucket. He suffered a concussion.,1
"An employee was traveling down a ramp in a powered industrial truck. The truck struck standing water, went out of control, and struck a support structure. The employee's hand was crushed between the truck and the structure, and the employee's middle finger was amputated.",1
"After cleaning the sidewalks on one side of a street, an employee was crossing the street to clean the sidewalk on the other side. A car struck him, and he suffered a head injury.",1
"An employee was in an aerial lift trimming palm trees with a chainsaw. One of the palm fronds fell from the tree, landed on the door of the aerial lift cage, and caused the door to open resulting in the employee falling approximately 20 to 25 feet to the ground. The employee sustained injuries to his ribs, hips, and left hand.",1
"An employee was monitoring the excavation of a 30-inch valve and the pipeline pressure. The employee started getting light-headed, short of breath, and hot. The employee was hospitalized with dehydration.",1
"An employee was inside a dumpster rearranging debris. The clamp of a chute, running to the dumpster from the roof, failed. Pieces of the parapet wall it had been attached to fell and struck the employee, who suffered multiple facial fractures.",1
An employee was traveling on a pallet jack when it collided with a stationary cart. The employee suffered a broken left foot.,1
"Three employees were cutting and removing a tree limb. One of them was holding a pulley rope that was attached to the limb. After the limb was cut, it swung and struck his upper body. He suffered a broken right arm and dislocations to both shoulders.",1
An employee was transporting liquid nitrogen to a lab in a cryogenic storage dewar. Some of the liquid nitrogen spilled on his hand and burned it. He was hospitalized.,1
"An employee was working on the main hydraulic ""pipe"" of a forklift, whose carriage had been raised about 4 feet so the employee could do the work. The carriage fell and struck the employee, who suffered a head laceration, a dislocated shoulder, and a broken leg. The employee was hospitalized.",1
"A dog got loose from its restraints during a veterinary visit and bit an employee, partially amputating the employee's right ring fingertip.",1
An employee was operating a stand up forklift when it struck a pallet rack. The employee's hand was caught between the forklift and the rack causing a partial left index fingertip amputation.,0
"An employee was climbing down a ladder attached to a concrete truck. He fell, landing on the ground and suffering a broken femur. He was hospitalized.",1
An employee who was cutting and cleaning up brush during landscaping experienced a heart attack and was hospitalized.,1
"An employee was trying to place tape on and feed paper through a machine spindle. When the employee tried to feed paper through the spindle to test the machine, the machine started up and pulled in the employee's arms, causing compression injuries to both.",1
An employee was unfolding a conveyor. The employee's fingertip was caught between the conveyor's rails and amputated.,0
"An employee was working at a welding machine when they turned their head due to a tangled wire behind them. The employee's finger got caught between a clamp on the welding machine, resulting in a partial amputation.",1
"An employee was removing slag from a boiler. A falling piece of slag struck the employee, who suffered fractured vertebrae.",1
An employee was checking the bottom door of the mixer to confirm it was closed when his left hand contacted the mixer blades resulting in multiple finger amputations.,0
"An employee was operating a forklift, reloading empty containers on a dock door. The trailer was pulled off the dock, causing the forklift to fall out of the trailer. The employee suffered fractured vertebrae.",1
"An employee developed heat-related illness after delivering pizzas. She was hospitalized, suffering from dehydration and low blood pressure.",1
"An employee was using a grinder to cut off a piece of tubing. The grinder jerked and cut the employee's left wrist twice about 2 inches below the palm, cutting the artery in his wrist. He was hospitalized.",1
"An employee was standing next to a flatbed truck as it was being loaded with 6-inch ductile iron pipes. As the pipes were being loaded, a pre-fabricated wood chock snapped and struck the employee in the face. The employee suffered a broken nose and a concussion and was hospitalized.",1
"An employee was walking from the terminal to the rental car area when they tripped and fell on the ground, sustaining a fractured knee. She was hospitalized and required surgery.",1
"On July 28, 2022, an employee was on the second floor of a residence setting up concrete pump hoses when they tripped on wood partitions on the floor and fell into a temporary guardrail. The guardrail gave away and the employee fell approximately 10 feet to the ground, resulting in a fracture to his left foot.",1
"An employee was working from a scissor lift at a height of about 6 or 7 feet. He became dizzy, lost consciousness, and fell forward off the lift. The railing briefly stopped his fall, but he fell head-first onto the floor (a fall of about 4 to 5 feet).",1
"An employee was using a liquid blend mixer to separate two 400-pound drums of liquid food ingredients. The metal clamp used to hold the drums slipped causing his finger to be caught between the two drums, partially amputating the right ring fingertip.",1
"An employee and co-workers were performing their morning fire engine checks for vehicles that would be in service that day. The employee used a ladder attached to a vehicle to climb on top of the engine and make sure items were secure. When the employee was climbing down the ladder, he fell approximately 6 feet to the asphalt below, possibly slipping due to an extra drip torch holder that was on the engine. The employee landed on his hip and his right wrist, which he used to stop his fall, resulting in a broken femur near the ball socket and a fractured wrist.",1
An employee was ripping pieces of plywood on a table saw. The saw caused partial amputations to the employee's left ring and little fingers.,0
"An employee was pulling underground cable. The employee's left little finger was caught between a winch/spool and mule tape, causing the amputation of the fingertip.",1
An employee was cutting copper piping using an alligator shear. The copper piece that was cut had a sharp end that amputated the employee's right ring finger directly below the upper joint.,1
An employee was shot by a customer.,1
"An employee was carrying a 65-pound metal plunger on his left shoulder when he tripped over a hose and fell forward. The plunger fell on his left hand, causing two fractures and crushing the index finger and the middle fingertip.",1
"An employee was handling tangled steel cable. The cable suddenly twisted and the employee's left thumb was entangled in the cable, instantly amputating their index finger to the first knuckle.",0
"A stuntman was rehearsing a film stunt that used a ratchet pull and an air ram (a hydraulic system that propels a person into the air). After being launched into the air, the stuntman flew over the stunt pad and struck a wall. The stuntman suffered a skull fracture and was hospitalized.",1
An employee was using a shovel to clean out an afterburner when bridged ash fell through a manhole and burned the employee's right leg and foot.,1
An employee was using a mill cutter to cut 6-inch slots. His glove was pulled into the cutter and his left thumb was partially amputated.,1
An employee suffered a fingertip amputation while trying to clear a jam in a muffin batter depositor machine.,0
"An employee stepped into a reclaim auger sump hole. The auger, which was on, caused an injury to the employee's lower right leg that resulted in an amputation.",1
An employee slipped and fell in the cafeteria sustaining a broken femur.,1
"An employee fell out of his truck, and his head struck the ground.",1
"An employee was cutting weather stripping with a utility knife. The knife cut his leg, requiring hospitalization.",1
"An employee stepped out of a vehicle onto an uneven surface, fell to the ground, and injured both knees and ankles.",1
An employee sustained a hernia while lifting a box.,1
"At 1:05 p.m. on July 29, 2022, an employee slipped while walking around a trailer. He fell forward to the concrete walking surface and suffered a concussion, as well as a broken tooth. He was hospitalized.",1
"At 1:15 a.m. on July 29, 2022, an employee was removing a ramp from the bumper of a box truck. The ramp fell on his fingers, partially amputating two of them.",1
"An employee was standing next to a flatbed trailer, helping a wheel loader operator load multiple sections of PVC water line pipe. He had his hand on the 12-inch water line to keep it from rolling off the trailer. When the pipe moved, he was pushed back, causing him to trip and fall down. The pipe came off the trailer and landed on his left leg, breaking his fibula.",1
"An employee was walking up a ladder from the roof to a bulkhead. The ladder shifted and he fell to the metal deck, suffering a broken left arm.",1
A mail carrier had lifted a sewer drain grate to retrieve a scanner. The grate slipped and amputated the tip of the carrier's right little finger.,1
"An employee was working on a belt and pulley under a sawmill trimmer. The machine caught his left hand, causing lacerations and fractures to the hand and fingers.",1
"An employee was putting water from a fire hydrant into a cement truck. When the hose pressurized, the employee fell off the fender of the truck and landed on the ground about 4 feet below. The employee sustained nine fractured ribs.",1
"An employee was working with a large pressure vessel. When the lid was opened, the employee was sprayed with 244-degree steam and suffered second- and third-degree burns to the chest and abdomen.",1
An employee was using a hydraulic tugger to lift a driller cage. The chain that the driller cage was hanging on broke and the driller cage struck the employee's face resulting in a mouth injury.,1
An I-beam fell off the wood blocks it was sitting on and struck an employee in the foot. He was hospitalized.,1
"An employee fell from a truck cab onto tracks, got up onto a crane catwalk, and then lost consciousness and fell again from the catwalk to the tracks. The employee suffered a skull fracture.",1
An employee was lining up holes to place a bolt on an auger. His finger was caught between the auger drive shaft and the auger screw resulting in an amputation injury.,0
"An employee was cutting (ripping) metal trim on a table saw when the metal kicked back and struck the employee's hand, lacerating fingers. The ring finger was cut into the bone and required surgery.",1
"An employee removed a wheel from a vehicle. While utilizing a tire changing machine, his left ring finger got caught between the rim and the tire resulting in a partial amputation.",1
An employee tripped over a rolling file cabinet and fell fracturing their right hip.,1
Three employees were loading bird racks onto a trailer. A rack slipped and rolled into another rack; one employee's right ring finger was caught between the two racks' handles. The fingernail was removed and the tip was partially amputated.,1
An employee was sanding a part on a lathe with sandpaper. The paper pulled his gloved right hand into the rotating shaft. He was hospitalized and his index finger was medically amputated.,1
"An employee was feeding expanded metal into a leveler. The machine pulled in his right hand, amputating the index, middle, and ring fingers from tip to knuckle.",0
An employee was running a hone machining center and was walking around to the rear of the machine to evaluate a coolant pressure gauge. The employee tripped over a steel angle iron that was on the floor and sustained a fractured hip requiring hospitalization.,1
"An employee tripped on a carpet and fell forward to the floor, suffering a collapsed lung.",1
An employee was working on a sheet line. The rollers caught his glove and amputated his fingertip.,0
"An employee was using a packing conveyor belt when material got jammed in the machine. While clearing the jam, his right hand was caught on the belt. The palm of the hand was skinned.",1
"On July 29, 2022, an employee was stepping off a forklift after backing it into a charging station. The forklift, still moving, pinned the employee's ankle under its tire. The employee's foot was broken.",1
"An employee was laying partially under a vehicle, repairing the brakes. The vehicle rolled over the right side of the employee's body, fracturing his right femur and ankle and dislocating his right hip.",1
An employee contacted a live power connection while chipping a duct bank to install new building water service. The employee was shocked.,1
An employee was guiding a plastic pipe in a trench to connect into a manhole inlet. The pipe was being lowered by an excavator and measured 12 inches in diameter and approximately 13 feet long. The employee was holding the end of the plastic pipe to maneuver it under the spreader of the ditch box when his left middle fingertip was pinched between the plastic pipe end and the spreader. The employee suffered a cut that resulted in surgical amputation of the fingertip.,0
An employee was using an electric pressure washer to clean concrete and tile surfaces in a water park. The water jet lacerated the top of the employee's left foot.,1
"An employee was attaching a lifting device to a filter section when the crane began lifting and the employee's left index finger, middle finger, and thumb were crushed between the lifting device and the filter section flange.",1
"An employee was working on a die cutting machine. While he was operating the turntable, he contacted the point of operation and suffered a fingertip amputation.",0
An employee was installing a power line. The employee contacted an energized line and was burned on the left arm.,1
"While carrying a box of parts, an employee tripped over a track rail and fell to the ground, striking his head on an table. The employee sustained a laceration across the eye and socket and an abrasion on a shoulder. The employee was hospitalized.",1
An employee was transporting a steel cart of eggs off a refrigerated trailer when the cart tipped over. The employee and the cart fell from the trailer's hydraulic lift to the ground and the cart landed on top of the employee. The employee sustained a fractured leg.,1
"While switching out a coffee carafe, an employee spilled hot coffee onto her neck, chest, and right hand. The employee was hospitalized with second degree burns.",1
"An employee was backing a loaded pallet jack out of a trailer onto a lift gate. When the employee applied the brakes, the pallet jack kept rolling. To keep from being run over, he jumped off the lift gate to the ground. He suffered a strained/sprained lower back, two broken left-side ribs, and a broken left wrist.",1
"An employee tripped over a floor fan in the kitchen area, fell, and fractured their left hip.",1
"An employee was troubleshooting a bundler machine's sealing bar, which was jammed in the forward, engaged position. The bar fell back into the neutral position and struck the employee's left middle finger causing an amputation.",1
"An employee was trying to install a 15-pound safety pin in a hydraulic hold-down. The hold-down moved, and the employee's left finger was caught between the pin and the hold-down housing. The employee suffered a partial amputation.",0
"An employee was performing maintenance to a clogged 10-inch water line on the sixth floor of a building. The employee poured hot water in the line and then went down to the second floor to open the line. When the employee opened the line, hot water caused second degree burns to his right arm and back.",1
"A brush component of an optic grader was running with a cover up for visual cleanliness inspection. An employee was cleaning an area in the brush component's drive system when the towel she was using got caught in the system's chain and sprocket. The towel wrapped her hand and pulled it into the chain and sprocket, resulting in an amputation at the mid-forearm.",1
"An employee was on a forklift transitioning between aisles in a freezer. The forklift began to slide causing the employee to strike a stationary metal rack. The employee sustained fractures to the left hand, right hip, and right ankle.",1
"A crane was setting a shipping container in place 40 feet above a deck. A twist-lock (weighing 11.5 lbs.) fell off the container and struck an employee standing on the deck, hitting the top of his hard hat. He suffered a skull fracture and was hospitalized.",1
An employee responded to a wildland fire and was constructing a line. The employee sustained heat stroke and was hospitalized.,1
"An employee was in a parking lot, trying to intervene as two people fought outside their vehicle. The pair got back into the vehicle, struck the employee with it, and then reversed and struck the employee again. The employee was hospitalized.",1
"At 7:22 a.m. on July 31, 2022, three employees were in a glass gantry, cutting pieces of glass to deposit them in a dumpster. One of them was putting a piece of glass in the dumpster when it bounced back and cut the employee's neck below the ear.",1
An employee was cutting onions with a knife. The knife amputated the tip of the employee's thumb.,0
"An employee was driving a golf cart. While turning to avoid a sand trap, the golf cart rolled over. The employee sustained a fractured tibia.",1
An employee was moving a forklift hay grapple by hand in the hay barn. The grapple started to tip and the employee tried to catch it when his left fingers got caught between the grapple and the concrete floor.,1
An employee was measuring the elongation of a pre-stress cable strand. The strand failed under tension and hit the employee's right arm and hand. The hand was injured and two fingers were fractured.,1
"While repairing a die, an employee's hand was caught by a nitrogen cylinder. The left middle and ring fingers were crushed and amputated.",1
"An employee was receiving concrete from a concrete truck. A mower, across the street and about 100 feet way, ejected a rock that flew into the back of the employee's head/neck. The employee then fell into a sidewalk railing. The employee suffered fractured vertebrae (caused by the rock) and a skull fracture (caused by the fall into the railing).",1
An employee was tripping pipe out of a hole on a 96°F day when he passed out due to heat exhaustion.,1
An employee was notching concrete with a 6-inch saw when the saw jumped and lacerated the employee's right calf.,1
"An employee was sitting down in her work chair when the chair rolled out from under her, causing her to fall onto her left hip and fracture it.",1
"An employee was repairing a yarn break. A filament of yarn waste from a package wrapped around the employee's thumb and a nearby, rotating, pre-tensioning shaft. Due to the strength of the filament yarn, the employee's right thumb was partially amputated.",0
"An employee was walking down an aisle to collect some product when they tripped over a protruding piece of plastic from a stationary buggy, falling to the ground and breaking a hip.",1
An employee was stung by a bee while pulling orders of roofing materials. The employee suffered anaphylactic shock.,1
An employee was driving a golf cart when it struck a trailer parked in a loading area. The employee suffered broken bones.,1
An employee was transporting a C-hook to the mill bay and went into an air conditioned area of the mill. The employee then collapsed due to heat illness.,1
A maintenance employee was taking a master link out of a chain when his hand got caught between the chain and sprocket resulting in fractures to the left hand.,1
"An employee was trying to calm a bull to separate it from cows. The bull pinned the employee against a fence; the employee suffered broken ribs and abrasions and bruising to the right bicep, back, and both calves.",1
"An employee was operating a forklift equipped with a commercial clamp attachment to move unprocessed gaylords of mailbags stored on floors, pallets, or shelves to inspector workstations. The forklift overturned and the employee's right foot became caught between the forklift’s roll cage and the concrete floor of the work area, resulting in injuries that required surgical amputation of his big toe and second toe, and a partial amputation of the third toe. The employee was wearing steel boots at the time of the incident.",1
"While carrying column bracers, an employee was climbing a ladder from the 10th floor of a building to the 11th floor. The employee's leg got caught in the ladder and they sustained a leg injury.",1
"An employee was sorting, stacking, and delivering two hand truck loads of product to a customer. On the third trip, the employee bent over to pick up a case of product weighing approximately 35-40 pounds and turned to place the product onto his dolly. As he turned to place the product on the dolly, he heard a cracking sound and felt a pain in the left hip area and a tingling sensation radiate down his left leg.",1
An employee developed heat stroke while delivering packages. The employee was hospitalized.,1
"An employee was pulling on a chain while working with a tow bar in proximity to an aircraft. The slack in the chain was pulled taut, causing the chain to tighten around the employee's fingers and resulting in a fingertip amputation.",0
Material was falling out of a truck's trailer. An employee went out to recover the fallen material. The truck then backed up and the employee's chest was crushed between the trailer and the loading dock.,1
"An employee was on break in the custodial office when they were bit by an ant, resulting in a hospitalization for infection.",1
"An employee was dismounting a forklift when they fell to the floor, resulting in a hip injury that required hospitalization.",1
An employee was moving a boiling pot of bagged food when hot water spilled onto the employee's left leg and into their rubber boots. The employee sustained burns to the leg and foot.,1
An employee was walking to deliver a message to another employee when she slipped on cleaning solution that was on the floor and fell breaking her left knee cap. The employee was hospitalized and required surgery.,1
"An employee was cleaning the inside of a concrete mixer. The employee's left little finger was caught between the mixer's motor and its sprocket, and the fingertip was amputated.",0
"Employees were using a mini-loader to move a vehicle hoist into a storage unit. When the loader was put into gear, the hoist rolled off and landed on the injured employee's leg, breaking his femur.",1
"An employee was walking when he tripped on a log and fell to the ground, suffering an injury to the left knee.",1
"An employee was removing produce from a conveyor belt. The belt caught her left ring finger, resulting in an amputation to the fingertip.",0
"An employee was sweeping away spilled sugar when a distiller door caught her finger, partially amputating the tip of her left index finger.",1
An employee was using a rag to clean product from the doctor blade assembly component of a foil lamination machine. The roller assembly caught the rag and the employee was pulled into the point of operation and suffered a partial amputation to the right index finger. The machine was unguarded at the time.,0
"An employee put an item on a shelf, then turned and tripped over a storage tote. The employee fell to the floor and broke her hip.",1
"A crew felled a 65-foot pine tree and were removing limbs. The trunk of the tree was approximately 6 feet above the ground and as the crew was moving the trunk to the ground, the tree fell on the injured employee. He sustained a fractured back.",1
An employee was fixing sprocket tooling. The belt caught the employee's right hand pulling the index finger into the belt driver. The employee was hospitalized and the finger was medically amputated.,1
An employee was inserting a drift plug. The employee's left thumb came into contact with an electric pipe belt sander and was lacerated.,1
"An employee was working inside a silo to install an aeration/unload system. He stepped over an aeration tube, fell, and struck his chest on the tube, resulting in a bruised or fractured sternum.",1
"An employee was pressing a part in a brake press machine when his finger became caught between the piece and the machine. The right index finger was partially amputated at the middle knuckle; it was later surgically re-attached. He also sustained a middle finger fracture and crush injury, and a laceration to the ring finger. The employee was hospitalized.",1
"An employee was working on a pump and removing the inspection plate. The plate blew off under pressure and hit the employee's abdominal area. Hot water came out and caused burns to the employee's abdominal area, thighs, and a couple places on the arm and knee.",1
An employee was cutting an angle on a 2-by-12 board. The rotating saw blade amputated three fingers on his hand and partially amputated a fourth.,1
"On August 2, 2022, at approximately 1:15 p.m., an employee was standing on a ladder filling an order for a customer. The ladder began to tip over and the employee fell to the concrete ground, resulting in injuries to his right leg and hip.",1
"An employee was loading groceries into a vehicle in a parking lot. Another vehicle struck the employee while turning, breaking both his legs and injuring his toes.",1
"An employee stood up after lunch, leaned on a truck, and lost consciousness due to the heat. He struck the truck's tailgate and then fell to the ground, hitting his head and suffered bruising.",1
"A temporary employee was moving a roller. The employee's finger was crushed between the roller and a nearby cabinet, causing a finger amputation.",0
"An employee was checking a car to determine if the radiator had coolant. When he opened the radiator cap, hot coolant sprayed out and severely burned his left hand. He was hospitalized.",1
"An employee was carrying baked goods when they slipped and fell, striking their head on the floor.",1
An employee had been training and running casing. After returning to the office he was hospitalized for heat exhaustion.,1
"An employee was loading a baler. The baler jammed; as he tried to clear it, it crushed his right hand.",1
"A fence panel was being moved by a telehandler, with an employee walking beside it to stabilize it with his hands. The employee tripped on a rock; the telehandler kept moving forward and its tire crushed the employee's right foot.",1
"An employee was working on a vehicle, using a wrench to hold a bolt. When he used an impact gun to remove the bolt, the wrench slipped out of his hand and hit him in the right eye, detaching the cornea.",1
An employee suffered severe dehydration after delivering packages in the heat.,1
"At 6:50 a.m. on August 2, 2022, an employee was cutting an 8-inch metal bar with a miter saw. The bar moved and the employee's left index fingertip was caught between the saw and the metal, resulting in amputation.",0
"An employee was hitching two dollies. He placed his finger on the ring of one dolly; when he went to connect the other dolly, his right thumb was crushed between the ring and the tongue of the dollies.",1
An employee missed the last step while descending a ladder and sustained a broken ankle.,1
An employee fell off a lift gate of a box truck while unrolling a hose. He landed on the concrete ground about 3 feet below and suffered a broken left arm.,1
An employee was assessing the A/C compressor on a crawler crane when his right hand slipped into the drive belt. His index finger was lacerated.,1
An employee was using a band saw when their left index finger contacted the blade resulting in amputation.,0
"An employee was loading cage equipment into an autoclave when the door malfunctioned. The employee's middle finger was caught between the door and the wall and crushed, resulting in a fingertip amputation.",0
"An employee was supervising children on a playground. She was picking up a ball when she tripped and fell, resulting in a fracture to her left ankle, which required surgery to repair.",1
An employee changed the tire and rim of a fertilizer tractor. The tire and rim were then put on the forks of a forklift. The tire and rim fell off the forks onto the employee's lower right leg causing fractures above the ankle.,1
"An employee was inspecting a scaffold when they tripped and fell on the edge of a raised welded steel grating scaffold deck. The employee sustained a fractured right wrist, a compressed neck vertebrae, facial lacerations, and knee abrasions.",1
An employee was using a ladle to scoop molten metal out of a trough system and put it into a mold. Molten metal spilled onto his right boot causing burns to the foot.,1
"An employee was raising a mold that had been laid down on a pallet. The mold started to swing and pinched the employee's right little finger against another tool, amputating half of the finger.",0
"An employee had been driving a forklift. He switched with another driver, who began to drive away. His lanyard was still attached to the forklift and he was pulled to the concrete floor. He suffered a concussion and broken ribs.",1
"During a training exercise, an employee was making an adjustment on a mobile crane's deck when they lost balance and fell 55 inches to the ground below. The employee sustained fractures to the pelvis and ribs, and a punctured lung.",1
"An employee was attempting to exit a tractor trailer when a cable caught his leg, causing him to fall to the ground resulting in a brain bleed and a fractured tailbone.",1
An employee was hospitalized due to possible heat stress.,1
"An employee was loosening a hex nut on the coating head of the machine to replace it. The employee dropped the adjustable wrench he was using and it fell onto the rollers of the machine. Upon reaching for the wrench, his finger was pulled into the machine and pinched between the rollers and a strip of steel. The employee sustained a partial amputation to the right index finger.",1
An employee was operating an electric pallet jack to pick up products when their foot slipped off the pallet jack and was struck by the equipment. The employee sustained a foot injury.,1
"An employee fell from a step ladder to the floor, suffering a broken ankle.",1
"An employee was using a crane to hoist a form. As he was using the hook and cable, his left middle finger was caught in a pinch point and broken. The finger was medically amputated.",1
An employee was making an adjustment to an extruder. The employee's gloved left hand was caught in a roll-to-roll nip point causing fractures to the ring and little fingers. The employee underwent a medical amputation to the little fingertip.,0
"An employee fell from a second-floor ceiling joist while installing a roof truss. The employee landed on the dirt ground 18-20 feet below and suffered wrist fractures, rib injuries, and a pelvic injury.",1
A garbage truck backed into a ladder an employee was working from. The employee fell and suffered head injuries.,1
"An employee was power washing a scrubber machine when the power washer lost pressure. The employee moved closer to the scrubber machine and their clothes became caught in the equipment, pulling their shoulder, collarbone, and forearm into a pinch point. The shoulder, collarbone, and forearm were fractured. Additionally, the skin in these areas was injured.",1
"A delivery driver felt unwell after delivering a package due to heat stress. The driver sat down, then lost consciousness and fell out of the truck, striking his head on the pavement and suffering a head injury. He was hospitalized.",1
An employee developed heat exhaustion while tying rebar in the afternoon. The employee was hospitalized.,1
"An employee was taking measurements to determine how much plywood he needed to firm up a cement and asphalt roof. He fell through a soft area of the roof, landing on the concrete floor 25 feet below and suffering broken bones and internal injuries.",1
"On August 3, 2022, an employee was working throughout the day, lifting boards onto pipe racks and truck trailers. Before lunchtime, the employee started to feel weak on the right side of his body and the left side of his face was drooping.",1
An employee was cutting meat with a meat saw. The saw lacerated the employee's right ring finger and they were hospitalized.,1
"An employee had been landscaping outdoors on a day with high heat and high humidity. Later, while in a company truck, the employee began having leg cramps and other heat-related symptoms. The employee was hospitalized for dehydration.",1
An employee was in a manlift installing a power bar for a crane system. The employee was using a portable bandsaw to cut the bar when the saw kicked back and lacerated his left inside forearm.,1
"On August 3, 2022, an employee was scraping tire weights off the rim of a tire when his arm bumped into the rim, resulting in a blood clot that required hospitalization.",1
"On August 3, 2022, an employee was calibrating a butterfly valve with a pneumatic actuator, using an air tool mechanism to cycle the valve. (Cycling the valve means using air to power an actuator that opens and closes the valve disk.) When the employee engaged the air to cycle the valve, the closing disk caught the employee's right ring finger, causing a fingertip amputation.",0
"Two employees were lowering a large, round carbon part (weighing about 75 pounds) from a lathe using an engine lift and strap. They stopped lowering it about 6 inches from the floor. The part then slipped from the strap and trapped one employee's little finger against the floor. The corner of the part amputated the employee's fingertip.",0
An employee had been delivering packages and was overcome by heat. The employee was hospitalized for dehydration.,1
"An employee became ill while cleaning an enclosed saw machine. He was hospitalized, suffering from heat exhaustion.",1
An employee was operating a table saw when it caused amputations to his hand and thumb. He was hospitalized.,1
An employee began to feel sick after working for 12 hours in the sun. The employee was admitted to the hospital due to dehydration.,1
"An employee was at the back of a tubing cutter machine, investigating a fault. The machine engaged and its table slid into his hand. He suffered broken bones and a laceration requiring stitches, surgery, and hospitalization.",1
An employee was working in the recovery boiler area which is a warm environment. He started experiencing shortness of breath and cramping during his walk-around. The employee was hospitalized for kidney failure due to heat stress.,1
"Two employees were at a private residence to commission a solar battery power wall. They were working from ground level, around the eaves and inside the garage. One employee began to experience chest pains and blackouts. He was hospitalized with heat stroke.",1
"An employee was moving a scissor lift out of a building. As the lift moved down a ramp, it went off the side. The employee struck the concrete ground and his left hip was broken.",1
An employee was shot while chasing a shoplifter out of the store.,1
An employee was placing a block under a steel plate when the plate slipped and caused an amputation to their right thumb.,0
"An employee was replacing a temperature gauge on a discharge header from a tank in a hot melt manufacturing building. As he was removing the gauge, hot adhesive discharged from the threaded port piping and caused second- and third-degree burns on the top side of his right arm from the elbow to the wrist.",1
"An employee was repairing trusses by attempting to remove a metal bracket from a truss. The employee was using two hammers, one as a pry bar and the other to strike the first hammer. A piece of one of the hammers broke off and punctured the employee's neck.",1
"An employee was pulling a large component out of a machine for maintenance. The employee fell backward and the component fell onto his pelvis and right leg, causing two fractures to the pelvis and one to the leg.",1
"On August 3, 2022, at about 9:45 AM, an employee was standing next to the depositor machine and extended his arm while it was in the process of being flushed for a product change over. The employee's finger was caught by the depositor's extruder valve in the middle of its evolution, resulting in an amputation of the left middle fingertip at the first joint.",1
An employee was walking past vehicles lashed to a ship when she tripped on a lashing strap and fell to the deck. She suffered a hip fracture and was hospitalized.,1
"An employee was operating a forklift. The employee's left foot was caught between the forklift and a storage rack, resulting in a foot injury.",1
"An employee was driving a forklift when it struck a beam. He was thrown forward, then backward and to the right, hitting his head on the steering wheel/mast and then on the propane tank. The employee sustained a head injury.",1
An employee had been preparing the skim system in the cream cheese processing department for clean-in-place procedures. Hot water was not flowing through the system. The employee was assisting in troubleshooting when a clamp opened and the employee was splashed with pressurized hot water resulting in burns to his legs and forearms.,1
"An employee at a drydock was keel-cutting a ship with an ultra-high-pressure water jet rig. The drive head on the rig gun broke off, causing the water to strike and lacerate the employee’s left arm and leg.",1
"An employee was reaching around the side of an access door when it was closed from the other side, causing a partial amputation to the employee's left middle finger.",0
"On August 3, 2022, an employee started a tractor while standing next to it. The tractor began moving and ran over the employee. The employee's foot was crushed and they also sustained a nearly detached ear.",1
An employee was using emery cloth to clean and polish a shaft on a lathe. The cloth got caught in the rotating shaft and pulled the employee's hand into the lathe resulting in a laceration to the hand.,1
An employee was using a grinder to cut concrete when the grinder caught the employee's shorts and lacerated his right thigh. The employee was hospitalized.,1
"An employee fell from a locomotive while servicing an HVAC system. The employee landed on the ground and suffered a head laceration, broken legs, and a broken wrist.",1
An employee was trimming a tree when the tree broke below their feet. The employee fell to the ground and sustained broken ribs.,1
"An employee was broaching a keyway in a bore sprocket with a manually operated powered cylinder hydraulic press. On pressing the broach through the initial phase of cutting, he used an extension rod to finish broaching and clear the broach from the part. While setting up the extension rod, he placed his left index finger on top of the extension rod. The press extended and crushed his finger, resulting in an amputation.",1
"An bus driver tripped in a parking lot where the angled concrete sidewalk meets the flat parking lot asphalt surface. She fell to the asphalt, suffering an injury to the left wrist that required surgery.",1
"An employee was helping disassemble scaffolding used in bridge repair. The employee fell, striking components of the scaffolding before landing about 8 feet below, and suffered injuries including soft-tissue damage to the back and neck, a head injury, and a broken right wrist.",1
"When an employee stepped off a lawnmower, the blade struck and lacerated the top of the employee's right foot.",1
An employee was smoothing a part on a grinding wheel. The employee backed the grinding wheel away from the part and was feeling the part to make sure it was smooth when his right hand was pulled into the grinding wheel. The employee sustained multiple lacerations to the right index and middle fingers requiring surgery.,1
An employee was unstrapping windows from a trailer when a window fell. The employee tried to catch the window and it lacerated his right arm.,1
"An employee was working from a scissor lift, hanging steel/plastic composite material against a wall. The employee fell to the dirt ground and suffered facial lacerations, bruising, a broken cheek, and two broken wrists.",1
An employee saw that a blinker had been left on in a truck. The employee got in the truck and turned the blinker off and then fell while getting out of the vehicle. The employee sustained fractured ribs.,1
"An employee was standing next to a concrete drain box. A track excavator bumped the box with its counterweights, causing it to fall over and pin the employee beneath it. The employee suffered a broken left shoulder, two broken ribs, a broken left kneecap, and a partial amputation to the right foot.",1
An employee fell from a top stock ladder while stocking shelf items. The employee suffered a broken femur and was hospitalized.,1
An employee fell out of the back of a box truck while counting cases of wine. The employee's head struck the concrete.,1
"At 5:10 a.m. on August 4, 2022, an employee lost consciousness due to dehydration and fell, suffering a head abrasion. The employee was hospitalized for dehydration treatment.",1
"On August 4, 2022, an employee was operating a stand-up reach truck. During a turn, the truck's load fell; the truck then trapped the operator's right leg against some material racking, causing a muscular injury.",1
"An employee was working at a heat bagger machine that puts food products into bags. While they were changing out the roll of film to create bags, the employee's left ring finger was caught in a pinch point on a belt and a pulley. The finger was medically amputated. The machine was not guarded at the time.",1
An employee sustained a back injury while helping a patient who had fallen over.,1
An employee was conducting drywall work on the balcony of an apartment. While descending a ladder he fell 25 feet to the concrete below. He was hospitalized with a facial injury.,1
An employee had been unloading a parcel trailer. He began feeling ill and was hospitalized for dehydration.,1
"An employee was trying to removed jammed items from a conveyor. A tine from the conveyor caught his right ring finger and pulled his hand in, breaking the finger.",1
A bakery sanitation employee was cleaning underneath conveyor belts when his right hand was pulled into a conveyor and entangled in the belt. The employee sustained a hand injury requiring hospitalization and surgery.,1
"An employee had just filled a tank with chlorine bleach and was disconnecting the equipment. The hose started spinning and sprayed the employee, who suffered chemical burns to the eyes and back.",1
"On August 4, 2022, at approximately 8:00 AM, a steel erection crew was installing decking on a roof that was approximately 40 feet high. An employee stepped on an unsecured piece of sheet metal and fell to the concrete surface on the ground level. The employee sustained fractures to their nose, upper jaw, and both legs. The employee also hit their head and sustained back injuries.",1
"An employee in a bucket truck was untying phases of a 7,200-volt three-phase line before a construction crew could change out a pole. The employee came in contact with a lightning arrester and was shocked. The employee also sustained electrical burns.",1
"An employee was helping unload material from a truck's trailer. The trailer lurched forward while the employee was reattaching the chains to it, causing the employee's left middle finger to be caught between the trailer and the chain. The fingertip was amputated.",0
An employee was lifting a heavy item in the storeroom when they felt pain in their right arm and then began to have chest pains.,1
"On August 4, 2022, an employee was dispensing a caustic foam from a large container into a bucket. The chemical splashed onto the employee, who suffered burns to the leg and abdomen area.",1
"An employee was operating a pallet jack when it struck a barrier pole. Her right leg was pinned between the pallet jack and the pole, and her fibula and tibia were broken.",1
An employee's fingertip was amputated in a conveyor belt.,1
"On August 4, 2022, at 12:20 PM, an employee was going to cut angle iron. The hydraulic vice on the vertical band saw amputated his left index fingertip.",0
"An employee was trying to clean behind an automated tier pushing machine. The machine caught her right hand, crushing it against the guard. She was hospitalized.",1
"On August 5, 2022, an employee was halfway up an 8-foot ladder to remove a satellite dish from the porch of a residential apartment. The employee fell backward and hit the ground below while the ladder fell in the opposite direction, twisting his ankle and resulting in an ankle fracture.",1
"On August 5, 2022, an employee was driving a pickup truck carrying generator batteries. After braking, the load in the back of the truck shifted and the driver pulled over on the side of the road to reposition the load. A slat broke as he pulled on a pallet and he fell from the back of the truck. His head struck the pavement and he sustained a skull fracture, a thoracic vertebra fracture, and brain hemorrhaging.",1
"On August 5, 2022, at 2:00 PM, an employee was mopping the floor when she slipped on the wet floor and fell, fracturing her left hip.",1
"An employee was using a 20-foot section of galvanized pipe to unclog a section of dust pipe in a baghouse. A tip of the galvanized pipe broke through the clogged section, contacted the relay fan, and rotated, pulling away from the employee's hand and striking the right side of his head. He suffered a laceration and a brain injury.",1
"An employee was returning a barrel to a dust collector. The employee's right index finger was caught between the side wall and a paddle in the dust collector's outfeed, and the fingertip was amputated.",0
Two employees were transferring gasoline to a boat when the vapor caught on fire. Employee 1 was hospitalized with burns to the face and body. Employee 2 sustained eye and skin injuries but was not hospitalized.,1
An employee's right palm was severely lacerated by the laydown trimmer.,1
An employee was using a vertical milling machine when it partially amputated his right thumb and ring finger.,0
An employee was working in an attic at a residential home when he lost balance and fell through the sheet rock. He landed on the concrete floor and sustained a dislocated shoulder.,1
"An employee was wrapping a trommel screener with plastic and fell onto the trommel. They became pinned while the machine continued to turn, and sustained a broken right leg.",1
"While stepping through a doorway from a carpet/mat to a tile floor, an employee tripped on the transition strip at the door, fell on his right side, and suffered injuries to the right wrist and hip.",1
"An employee was maneuvering an electric pallet jack from the ground to relocate it when her leg got pinned between the pallet jack and a pole located in the loading dock, resulting in a fracture.",1
"An employee was performing an EKG on a patient in a hospital room. A cord under the patient's bed caught the employee's foot and he fell to the floor, suffering an injury to the left hip. He was hospitalized.",1
A maintenance employee was coming down in a scissor lift. The lift caught the employee's right ring finger and injured it. The employee was hospitalized.,1
"A temporary employee was operating a projection welder. As she was moving a piece into position, the machine started and caught her left index finger in the point of operation. The fingertip was amputated.",0
"An employee was finishing disassembly of an engine block, guiding the camshaft through the bore of the cambox of a naval ship's engine. The employee was standing on the rear platform of the engine rotisserie stand when his right foot slipped and he fell in between the stand and the engine. He planted his foot in the oil drain pan and then slipped again, hitting his back against the frame of the stand. The employee sustained a fractured right scapula, two fractured ribs on the right side, and bruising to the right lung.",1
An employee was trimming shrubbery at ground level and was stung repeatedly by bees.,1
An employee was waiting to off-load a truck that was being backed up to the door when the dock plate malfunctioned. The employee was helping to lower the dock plate manually when the plate fell and broke the employee's left arm.,1
An employee was routing electrical conduits at a work site when they began to feel symptoms of heat exhaustion.,1
"An employee was cutting a 2-by-4 with an electric saw. As the employee cut downward, the saw amputated his left index fingertip at the first joint.",0
"At work, an employee was feeling fatigued and had muscle cramps. After the employee drove home from work, he experienced heat stress and passed out.",1
"On August 5, 2022, an employee was about a 6 feet up a ladder, testing a connection in a light fixture. The employee was shocked and fell, suffering broken vertebrae, a broken rib, and a head contusion as well as a burn to the right hand from the shock.",1
"An employee was attaching lifting bridles to a front-end loader when the front-end loader lurched forward and struck the employee in the head. The employee sustained a fractured jaw, fractured back, and lacerations on the head and knee.",1
An employee was cutting plywood on a table saw when the blade amputated their right thumb.,0
An employee was picking up a pack of dog food when she suffered an aggravated herniated disk.,1
"A forklift struck an employee, breaking his right leg.",1
An employee was getting into a semi truck when his back popped and he fell.,1
"An employee was doing routine work on a pump when a drain valve snapped out. A mixture of hot diethanolamine and triethanolamine was released, burning the employee's abdomen, forearms, and legs. The employee was hospitalized.",1
"An employee was working on a roof, installing a layer of insulation. He fell to the ground 40 feet below, suffering a broken orbital bone, ankle, and elbow.",1
"A pump part was attached to a forklift with a strap. The forklift operator raised the part up to spin and flip the part over to the unprepped side to continue the sand blasting process. The injured employee was assisting when the part/strap shifted allowing the part to fall, breaking the employee's arm. The employee was hospitalized.",1
An employee fell approximately 10 feet from a fixed ladder and struck his head on the ground sustaining a head injury.,1
An employee was assisting a fitter to fit a metal object underneath a bar. The chain broke and a piece of steel plate hit the employee's hard hat and left shoulder. The employee sustained brain bleeding.,1
A firework exploded and amputated an employee's fingers.,1
"An employee was preforming a pre-job walk at a construction work site with a utility company preparing to perform utility locating services. A car struck the employee causing a brain bleed, broken bones, and a dislocated shoulder.",1
"An employee was helping rig up a vibrating line. The line's end came loose and struck the outside of his calf, causing swelling and a hematoma.",1
An employee was walking from the north entrance in a parking garage toward the west entrance to assist a customer. A customer's car entered the north entrance and struck the employee on the right side of her body resulting in a fractured right tibia.,1
"An employee was operating a drill press when their gloves were caught in the machine, resulting in a thumb amputation.",1
"An employee was pushing back a stand of drill pipe on a rig floor. He slipped and fell forward, putting his hands out in front of him to brace his fall. The drill pipe moved back slightly and pinched his right index and middle fingers against the rig floor, resulting in the amputation of the two fingertips above the first knuckle.",0
An employee working an attraction went to step on a foam ball and slipped. He fell to the ground and sustained a broken femur.,1
"On August 6, 2022, an employee was operating a stand-up forklift when it struck a fixed post. The employee's left thumb was caught between the forklift and the post, resulting in an amputation to the thumb.",1
An employee was assembling sets of clips for a worksite. The employee began to lose motor function and lost consciousness due to heat exposure and dehydration. The employee was hospitalized.,1
"An employee was cutting a 1-by-6 board with a cordless circular saw on a pile of lumber. The saw kicked back and caught the employee's left little, ring, and middle fingers, causing partial amputations to all three.",0
"On August 6, 2022, at 10:17 AM, an employee was loading mail into a car for delivery. The door closed on her left index finger, amputating it above the knuckle.",0
"On August 6, 2022, an employee was installing the electrical igniter for a firework device that was loaded with fireworks. The fireworks inside ignited, severely burning the employee. He suffered burns to the chest, neck, and face; damage to the chin, jawbone, and nose; and loss of skin on the face.",1
"A pergola fell onto an employee resulting in loose teeth and fractures to their nose, leg, and ankle.",1
"A Terminix employee was inspecting a house for termites. While he was in a crawlspace, a copperhead snake bit him.",1
An employee was climbing a ladder to access a pump. The employee fell from near the top of the ladder and suffered a broken right arm and right hip.,1
An employee became overexerted and developed heat stress while working a production line in the evening. The employee was hospitalized.,1
"An employee was processing merchandise and needed more totes to continue his task. To retrieve the totes, the employee used the conveyor belt to access the dock below to where the totes were located. His foot became caught between the links of the conveyor belt, which caused lacerations and muscle damage to his lower leg.",1
"A forklift exited a van and ran over an employee's foot, fracturing it.",1
An employee returned from an outdoor mail delivery route having sustained heat exhaustion. The employee was hospitalized.,1
"An employee was working with a metal furnace. The employee developed cramps and was hospitalized, suffering from heat stress.",1
An employee was spraying belt dressing on a conveyor's head pulley when his glove got pulled into a pinch point. The employee sustained fractures to their facial area and lower right arm.,1
An employee was removing a blanket cooler machine from a patient's room. The employee sustained a collapsed lung while lifting the machine.,1
"An employee was performing a health screening on a cat when the cat bit her hand. The following day, the employee began experiencing swelling and a fever due to an infection from the bite. She was hospitalized.",1
An employee was walking toward a hot box while carrying a sheet pan of cooked chicken. The employee slipped and fell to the ground sustaining injury to their right hip.,1
"On August 7, 2022, at about 12:30 PM, an employee was working to open a gate at the bottom of a railcar when they were struck in the face with a metal prybar. This resulted in a laceration below the right eye, and an injury to the right eye that required surgery and hospitalization.",1
"An employee was working on an HVAC system on the roof of a commercial building. The employee was climbing down from the roof using a fixed ladder when he fell off the ladder, resulting in two shattered heels that required hospitalization.",1
"On August 8, 2022, an employee was working on an automatic palletizer. A pallet got stuck on the roller; as the employee tried to free it with a pry bar, his right middle finger was caught between the pry bar and the roller. The fingertip was amputated.",0
"An employee was aligning the attachment coupler pin boss on a skid steer to pin the bucket cylinder rod end to the skid steer. The coupler was partially raised off the floor, and synthetic blocking was placed beneath it. A floor jack was then placed beneath the coupler to make final adjustments, aligning the pin boss and the cylinder rod end for pinning. While on his knees, the employee operated the floor jack with his left hand and had his right hand on the coupler pin boss for balance. The jack shifted, causing the pad of the employee's fingertip to become pinched between the pin boss and the cylinder rod end. The employee suffered an amputation of tissue on his finger pad that required surgery to reattach.",0
"An employee fell out of the man basket of a truck. The employee's head struck the asphalt, and the employee suffered a concussion and a hairline fracture to the skull.",1
"An employee was cutting an 8-by-4-foot piece of plywood with a portable handsaw when the saw blade contacted his left hand, resulting in amputation of the left index finger.",0
"Employees were troubleshooting a triethylene glycol (TEG) pump on an ethylene glycol vessel system. After shutting down the pump, employees closed the valve on the system. Pressure built up and blew holes in the vessels (through the walls of the pipe). The employees were sprayed by hot liquid glycol and one employee sustained burns.",1
"An employee was on a 12-foot ladder while caulking the face of a building when they fell from the ladder to the ground below, resulting in a broken wrist, finger, and eye socket.",1
An employee was painting on a deck about 10 feet above the ground. The employee fell from the deck to the ground and suffered six broken ribs and a broken shoulder.,1
"An employee became ill and was hospitalized, suffering from heat exhaustion.",1
An employee removed a piece of laminate paper from a photo eye. A bunk of material pinched their finger against a roller. The employee's finger was partially amputated by a powered conveyor.,0
"An employee was collecting shopping carts when he tripped and fell to the pavement, suffering a broken hip.",1
"Employees were training red river hogs for shows. An employee was giving a hog a treat when the hog over-reached, biting and partially amputating the employee's left little finger.",0
"At about 4:10 p.m. on August 8, 2022, an employee had developed heat stress symptoms (among them cramping, nausea, and tingling in the fingers) after finishing a shift in a furnace room. The employee was hospitalized.",1
"An employee was loading packages. A package struck the employee's left leg, tearing a tendon; the employee was hospitalized.",1
"An employee was using a portable 4-foot step ladder to climb down from a plexiglass tank after cleaning it. He fell off the top step of the ladder, landing on the ground on his right side. He suffered fractures to the pelvis, right side ribs, and elbow, as well as pain in the right leg.",1
An employee was cleaning subs (wireline parts) by hand in the parts washer using a wire brush when a small sliver of metal punctured his left index finger. The employee was later hospitalized with an infection and required surgery.,1
"An employee tripped over cords on the floor and fell, resulting in a fractured right hip.",1
"An employee was stocking drywall into an upstairs room when they tripped and fell off the top of the mechanical room to the ground below, resulting in a right wrist injury.",1
"A temporary worker was operating a slitter rewinder machine when their arm became caught between rollers in the machine, resulting in fractures.",1
A temporary employee was assisting the operator of a baler/compactor. The hydraulic lock closed on the employee's hands crushing four fingers between the door and the hydraulic lock/gate. The employee's fingers were medically amputated.,1
An employee was repositioning a piece of equipment on a trailer when their finger was caught between the piece of equipment and a hydraulic fitting. The employee's fingertip was partially amputated.,0
An employee was inspecting a vacuum still when its manway lid fell and crushed his right ring finger. The fingertip was medically amputated.,0
"Employees were taking down a cratered pumping unit. The pump jack beam had been removed from the unit and the employees were preparing to take off another piece when the beam fell onto one employee's legs, breaking both of them. The employee required surgery.",1
An employee fell off an air conditioner that was located on the roof. The employee landed on a lower surface and sustained broken bones.,1
"At about 8:40 p.m. on August 8, 2022, an employee was loading a ""horn and cone"" (a thin stainless steel tube with a cone) with a netting roll. The employee was removing the horn when the netting tail become entangled and wrapped around the wheel and shaft of the brush, which rotated at about 90 revolutions per minute. The employee was trying to remove the netting when their right hand became entangled in it and was pulled into the rotating shaft. The employee suffered a compound fracture to the little finger and a partial degloving.",1
"An employee was carrying a laundry bag of linens when they slipped on linen or the laundry bag and fell to the floor, resulting in a fractured right patella.",1
"On August 8, 2022, an employee was on top of the forks of a forklift to manually push pans on the forklift into a dumpster. As the employee stepped down from the forks, his foot contacted the controls, causing the mast to move and pin him against the forklift. The employee suffered a fractured pelvis.",1
"While stepping up on a curb, an employee missed the step and fell to the ground. The employee's right arm was broken.",1
"An employee and a co-worker were repairing a pallet, with the co-worker holding the repair parts and the employee using a pneumatic nail gun to nail the parts together. The co-worker lost control of the repair parts and they struck the employee, causing the employee's left middle finger to become nailed to a board.",1
"An employee was using a sheet metal coupler/bending machine, putting a groove into a piece of HVAC. The employee's left middle fingertip was caught by the machine and amputated by the swaging wheel.",0
An employee was undoing the banding on a stack of steel tubing to transfer to the saw deck. The tubes separated and fell on the employee's legs fracturing the left tibial plateau and the lateral malleolus of the right fibula.,1
An employee was walking in the hospital hallway when they tripped and fell resulting in a broken hip.,1
"On August 8, 2022, an employee was making 1-inch valves on a machine when his left little finger was caught in a pinch point resulting in amputation of the fingertip.",0
"An employee completed a repair job on an expansion joint that had a known leak. The employee then went through decontamination and removed his personal protective equipment (PPE). The employee placed his decontaminated PPE on the ground and proceeded to finish cleaning up the work area. Once done, he picked up the discarded PPE to take it to the appropriate disposal bin. He carried the PPE under his right arm. By the time he reached the bottom of the stairway to exit the unit, he felt a burning sensation under his arm. The employee sustained chemical burns.",1
"An employee was running rods into a well. When the tongs were engaged, they caught the tip of his left thumb, causing its amputation.",0
An employee was on a roof installing new tile and had a heart attack.,1
An employee suffered a back injury while getting up from his desk chair.,1
"An employee was performing backflow operations at a tank battery. After shutting a valve, pressure built in the line causing the line to rupture. The employee was standing near the line when it ruptured and their right arm and the right side of their torso were struck by hot oil, water, and sand (approximately 147 degrees) resulting in severe burns requiring hospitalization.",1
An employee became overheated while mopping a floor. He was hospitalized for dehydration.,1
An employee was cutting a 55-gallon drum with a torch and the drum exploded. The employee was hospitalized with burns to over 50% of his body.,1
"On August 9, 2022, an employee was organizing wire reels to prepare for use in a machine. A forklift was coming through and hit one of the reels causing it to roll into another reel. The employee's fingertip was caught between the reels and amputated.",0
"The injured employee was observing another employee utilizing a forklift to lift a tool off a testing cart. After the forklift lifted the took, the driver began to back up. The forklift rolled over an uneven surface which cased the lifting strap holding the tool to disengage from the forklift forks and drop to the ground. As it dropped, it contacted an additional tool stand near where the injured employee was located. When the injured employee noticed the tool stand falling over, he put his left hand out and it was caught between the tool and the stand resulting in amputation of the middle and ring fingertips.",1
An employee was performing maintenance on a baggage loader. He was observing a wheel that was making noise underneath the baggage conveyor belt when the machine was activated and his hand got caught between the wheel and the conveyor belt. The employee sustained a crush injury to the hand.,1
"An employee slipped and fell while walking up a driveway in the rain, landing on the ground and suffering a broken hip.",1
"Employees were removing the lid of an access hatch from the top of a clearwell tank. The hatch lid (weighing 75-100 lbs.) slipped and landed on an employee's left middle finger, pinning it against the concrete lip of the hatch. The employee's finger was partially amputated.",0
"An employee was working on a job site in the heat and humidity when his hand started cramping. The employee rested and drank fluids, then returned to work. Later, the cramping worsened, and the employee was hospitalized for dehydration.",1
"On August 9, 2022, an employee was walking around a pallet. The shoelaces on the employee's left foot caught on the pallet, causing the employee to fall to the concrete floor and suffer a broken right hip.",1
"Three sections of concrete forms had previously been assembled and used to pour concrete footings. The forms were being moved to prepare for the next section of the footing pour. One of the end sections was removed and hoisted away. The support braces of the next form were removed before the rigging was placed on the form, resulting in the form falling over and striking an employee's leg just above the knee. The employee's femur was fractured.",1
"On August 9, 2022, an employee was operating a band saw, shaping foam pieces, when his fingers contacted the blade resulting in amputation of his left middle fingertip.",0
An employee's left middle fingertip was amputated by a band saw.,1
"Three employees were at a worksite. A nearby mini excavator was digging a small excavation with the rear of the excavator facing the rear bed of a dump truck. The injured employee began to retrieve tools from the truck as the mini excavator was backing up. The employee was struck by the rubber track of the excavator, resulting in a knee contusion and ankle fracture.",1
"An employee was trying to redistribute the load on his trailer by adjusting/sliding the tandem wheels on the rear of the trailer. He started to pull the air release valve to release the pins, lost his balance, and had to put his hand on the tandem frame rail. The rail system caught and amputated the tip of his right middle finger.",0
"An employee was standing at a gun bench, looking straight down as he loaded a firearm. A piece of debris from downrange passed over the top of his eye protection and struck the lower portion of his left eye area.",1
"An employee was participating in football practice. While blocking, the employee fell and hyper-extended and dislocated his left knee.",1
An employee was carrying a box of screws. The box flipped over and screws fell to the floor. One of them punctured his bootheel and the bottom of his right foot.,1
An employee was using a table saw when it amputated the employee's finger.,1
"An employee was removing a basket from behind a forklift. The forklift ran over his left foot, lacerating the bottom of the foot. The employee was hospitalized.",1
"An employee was standing on the street, preparing to leave a job site. A pickup truck with a wood chipper trailer was backing up and pinned the employee against the front of a skid steer. The employee suffered multiple fractures to the right femur.",1
"An employee was outside a company truck, placing safety cones around it to secure a working area. Two vehicles collided on the road; one of them then went out of control and struck the employee, who suffered broken ribs, a broken orbital socket, hip and leg injuries, and a concussion.",1
"An employee was on stilts, reworking a ceiling grid. He slipped on a screw and fell to the ground, suffering a broken left knee.",1
An employee slipped and fell while walking down stairs. The employee suffered a fracture.,1
An employee was pouring a mold with a full ladle of aluminum. He bumped the mold and molten aluminum splashed onto him. He then dropped the ladle and more aluminum splashed onto his left leg and foot. The employee sustained burns requiring skin grafts.,1
"An employee was running to a work truck in the rain. The employee slipped on the driveway and fell, suffering a dislocated ankle and a broken fibula.",1
"An employee was teaching a downhill mountain bike class when he went over a small jump. The bike struck a deer as it landed, and he flew off. He suffered six broken ribs, a broken collarbone, a broken scapula, and a punctured lung. He was hospitalized.",1
An employee was operating a shear machine when their middle finger was caught between sheet metal and the shear. The employee's finger was partially amputated.,0
An employee was buffing a brass part on a motorized buffing wheel. The wheel caught the employee's left glove and amputated the employee's ring fingertip.,0
"An employee was painting from a ladder. The employee fell from the ladder, landing on the ground 6 feet below and suffering a broken femur.",1
"An employee was in the basket of an aerial lift while setting up the lift when the outrigger pads supporting two of the booms pinched a cylinder, causing a boom to fail. The employee fell to the ground, resulting in a broken ankle and two broken feet.",1
"An employee using crutches to walk tripped and fell to the ground. The employee was hospitalized with a broken femur, which required surgery.",1
"An employee was monitoring the unrolling of cable when the cable became tangled, causing the spool of cable to topple over onto the employee. The employee sustained injury to their right leg.",1
"An employee was operating a wire cutting machine. The pay-off reel got caught on the reel racking system, which forcefully pulled the wire cutting machine into the metal racking system and the machine struck the employee's ankle. He sustained fractures of the left fibula and tibia.",1
"Employees were using a bucket loader to pull a forklift out of mud. The strap being used to pull the forklift snapped, and a hook on it struck one employee's left shin, causing an open fracture.",1
"An employee was using a pry bar to remove a spindle from the axle of a vehicle. The pry bar slipped and struck him in the forehead, causing a concussion and a head laceration. He was hospitalized.",1
An employee suffered a back injury while moving a 40- to 45-pound tote. She was hospitalized.,1
"An employee was caught by a winch cable, which pinched his finger against its roller. The fingertip was later amputated.",0
"Employees were pulling quartz slabs weighing approximately 500 pounds each from an A-frame storage area. An employee was holding the slabs vertically when they fell on him resulting in a ruptured spleen, a punctured lung, and multiple fractures. The employee was hospitalized.",1
An employee was stocking cleaning chemicals when ammonia splashed onto their hands and shirt. The employee's breathing began to slow down.,1
"An employee was loading a die into a 5,000-pound hammer. The hammer was brought down while the employee's hand was resting on the fixed bottom die. It crushed the hand and caused amputation of the little finger.",0
An employee was driving a golf cart from the lot to the sales office when the golf cart rolled over. The employee sustained a head injury.,1
"An employee was walking to the timeclock in the breakroom when her foot got stuck to the round drain in the breakroom floor, causing her to fall. The employee sustained a fractured right knee requiring hospitalization.",1
An employee was moving meat from a smokehouse to a freezer using a trolley. The trolley fell off its overhead rail and landed on the employee's feet. The employee suffered a broken fibula.,1
An employee was operating a stand-up forklift when it backed into a wooden door frame. The employee suffered a broken pelvis.,1
"An employee was using an asphalt pour pot to patch holes in asphalt. The pot tipped over, and hot asphalt caused second-degree burns from his hands to his elbows. He was hospitalized.",1
"An employee was hanging a small, 4.62-pound steel plate. The plate fell onto his left shin, lacerating it.",1
"An employee was cutting wood on a table saw. The rotating sawblade caught his glove and pulled in his right hand and fingers, lacerating the index finger and thumb.",1
An employee was changing the motor on a four-bin feeder at the asphalt plant. A small backhoe was parked on ground that was sloped towards the feeder bin and an outrigger had been extended as a safety stop. The employee stepped into the bucket and weight was transferred to the front of the backhoe allowing the outrigger to come off the ground. The backhoe then rolled forward. The employee got caught between the backhoe and the feeder bin and sustained bruising to the upper leg.,1
"An employee was filling a forklift propane cylinder when the nozzle disconnected from the cylinder and released propane vapor. The vapor ignited, and the employee's ears, neck, and upper extremities were burned in the flash fire.",1
"An employee was unloading product from a trailer using a walkie/rider pallet jack. While backing out of the trailer, the pallet jack jerked and the employee slipped off it. His left leg was briefly pinned between the pallet jack and the trailer wall and was broken.",1
"During a turn, an employee fell off a powered pallet jack onto a pallet. The jack then struck him and caught his right ankle against the pallet, breaking it. The incident took place during a training activity.",1
"An employee was feeding sticks of wood into an end-matcher machine when their glove was caught by the machine, pulling their finger into a pinch point and resulting in a fingertip amputation with no bone loss.",0
"An employee was walking in an aisle. To move out of the way of forklift traffic, the employee stepped between a metal tub and a storage tank. A forklift bumped the tub, which pinched the employee's leg against the tank. The employee suffered lacerations and fractures to the leg.",1
An employee was attaching a light bar to a trailer when their left middle finger got caught between the light bar and a jig. The fingertip was amputated.,0
"An employee was using a bulldozer to smooth out a windrow of dirt near a pit used to bury dirt. The ledge of the pit collapsed causing the bulldozer to fall into the pit. The bulldozer rolled over onto the top of the cab and came to rest at the bottom of the pit. The employee sustained a concussion, a deep laceration to the head, and bruising to the ribs and shoulder.",1
An employee was repairing the belt on an HVAC system when his left hand was caught in the belt. The employee's left index and middle fingertips were amputated.,0
"After unloading a delivery on August 10, 2022, at 11:45 AM, an employee was folding up the liftgate when his left hand was caught between the bumper and the liftgate causing a partial amputation of his middle fingertip.",0
"An employee working from a boom bucket had just put copper on a utility pole and was setting it. The employee moved the center phase, which was laying on the insulator, when an electrical current from the tie arced. The employee sustained burns to his chest, neck, back, face, nose, and ears.",1
An employee developed heat-stress-related muscle cramps while doing concrete construction work in the heat.,1
An employee was scanning inbound pieces in the dock area when they were struck by a clamp truck. The employee sustained injury to back vertebrae and a broken foot that required hospitalization.,1
"An employee was working on an assembly line, using a low-speed tool with a rotation shaft to torque down a fitting. Her glove became entangled in the rotation shaft, causing the amputation of her left ring fingertip at the last joint.",1
An employee was using a magnetic drill to drill through a carbon steel T-bar. The employee's fingers were caught between the drill bit and the drill's base; the employee suffered a partial amputation to the right middle finger and a laceration to the right ring finger.,0
"An employee was shutting off a broom tractor. As he was pulling his hand out of the motor compartment, it contacted the motor fan, which amputated his left ring finger.",0
"An employee was slicing pepperoni with a deli slicer. The slicer cut her left middle and ring fingers, causing amputations to both.",0
An employee was involved in a verbal altercation with a customer who pulled out a knife and stabbed the employee in the neck. The employee was hospitalized.,1
A hole was being drilled in a boat. An employee's finger was in the hole when the drill being used struck the employee's left index finger.,1
"An employee was setting a ridge on a new house. The employee fell from the plank of a scaffold, landing on the ground about 10 feet below and breaking both wrists.",1
"An employee slipped and fell while walking into a building, striking his head on the floor and suffering a head laceration.",1
"An employee was cutting wooden 2x4 wedges to raise and support a concrete pad form. The employee was supporting a 2x4 on the edge of a sawhorse. While using a circular saw with their right hand, the employee's left glove got caught in the circular saw, resulting in an amputation to their little finger.",0
"The injured employee was directing the operator on an excavator with a boom attachment that was carrying a load of rebar. When the load came down, the bars wedged instead of laying flat, and then rolled toward the injured employee striking and fracturing his left ankle.",1
An employee was throwing a glass tabletop into a garbage truck. The glass broke and cut his arm.,1
"An employee was waxing and stripping the floors in a maintenance room when he slipped on the stripping solution and fell onto the solution on the floor. The employee sustained burns to the abdomen, thighs, and buttocks.",1
"An employee was using sandpaper to clean a lathe when their glove was caught, pulling their right hand into the rotation. The employee sustained a broken right wrist and broken fingers. The employee was hospitalized and required surgery.",1
"An employee was walking to exit a building when he slipped on water and fell, hitting his head on the concrete ground. The employee sustained a brain bleed and required staples in his head.",1
"An employee was using a freight elevator to deliver food products when a cable failed, and the elevator dropped approximately 15 feet to the ground floor. The employee suffered a broken ankle, a thoracic sprain or fracture, and head injuries.",1
"An employee was moving a radiator onto a 2-by-4 piece of lumber. The radiator fell and pinched the employee's fingertip, causing a partial amputation to the finger.",0
An employee was stung by a bee and suffered an allergic reaction.,1
"An employee was helping install a stair. The employee was standing on a 2-by-12; when the employee put a nail into the wood, it broke and the employee fell. The employee landed on a concrete pad 10 to 11 feet below, suffering a broken ankle and heel bone.",1
An employee was removing debris from a planer. The piece of lumber he was using pulled his hand into the machine and the blade amputated his right index fingertip.,0
"An employee was cleaning a machine's die head. Hot plastic was purged onto the employee, who suffered second- and third-degree burns to the lower right forearm from wrist to elbow.",1
"An employee was working to off-load packages from their delivery truck to take to another vehicle for delivery. While pulling down the roller-type door on the truck, the employee's left ring finger was caught in the door and 1/4 inch of it was amputated.",0
"An employee was cleaning a yard truck's windows when he fell, landing on his right elbow. He suffered multiple fractures to the elbow and was hospitalized.",1
"A temporary employee was hosing and washing down a warehouse floor with water/soap and sanitizer. He tripped on a metal strip attached to the docking floor plate, slipped on the mix of water and soap, fell on his back, and slid off the dock. He suffered a bleeding wound to the back of his head, as well as a back injury. He was hospitalized.",1
"On August 11, 2022, at 6:04 AM, an employee was clearing a jam in a wood grinding machine when a flash fire occurred causing second-degree burns to the employee's right arm, from the elbow to the fingertips.",1
"An employee was getting out of a truck cab. Her right ankle gave way and she fell, landing on her back. She suffered a broken right ankle, as well as a possible back fracture.",1
"An employee was dispensing caustic soda from his truck to a tank. The soda contacted the employee's legs, and he was hospitalized with chemical burns.",1
An employee was working in their office when they were bitten on the neck by a spider.,1
An employee was operating a forklift when it struck a rack. His foot was crushed between the forklift and the racking. The employee sustained two broken toes.,1
"An employee was using a step ladder to retrieve a box from the top shelf in a kitchen storage area. As the employee was coming down the ladder, she put the box she retrieved onto a lower shelf so she could step off the ladder without something in her hands. As she stepped back, she missed the last rung of the ladder and fell backward onto her left side, resulting in a dislocated left ankle that was also broken in three spots.",1
A prospective employee started moving a stand-up reach forklift to show his proficiency. The wheels were previously turned upon parking. When the forklift moved it struck two employees. Employee 1 sustained injury requiring first aid only. Employee 2 was pinned under the forklift's wheels and sustained a compound fracture to the right leg requiring hospitalization.,1
"An employee was unhooking a dolly from a tractor to stage it in front of the intended rear trailer. He lost his footing and placed his left hand on the frame of the tractor as the dolly rolled into his hand, resulting in a possible partial amputation of the left thumb.",0
"An employee was using a center-rider double pallet jack to carry pallets down an aisle. The pallet jack went out of control, and the employee's left foot was crushed between it and the rack as he tried to step off it.",1
"An employee was backing a front-end loader out a doorway. The loader passed over a dip in the floor from the floor drain, and the employee was jarred into its door. The employee suffered a spinal cord compression causing pain in their neck and back, along with numbness in the legs.",1
A driver became dehydrated after completing his route in the heat.,1
"An employee was climbing down from the back of a container. He fell, landing on the warehouse floor and suffering a broken left femur.",1
"At 10:00 p.m. on August 11, 2022, an employee was welding beams on sawhorses when one of the beams fell. It crushed the employee's left hand against another beam, causing multiple displaced fractures to the thumb and three fingers. The employee was hospitalized.",1
"An employee was trying to change the electric motor on a hospital bed. The bed collapsed as he removed the motor, and its frame crushed his thumb. He suffered an open fracture to the thumb, with tendon damage, and was hospitalized.",1
An employee was found on the floor after possibly falling. The employee suffered head trauma that required hospitalization.,1
An employee was standing on a trailer when they slipped and fell off the trailer's tongue. The employee hit their shin on the trailer's tongue and sustained a muscular injury.,1
"An employee entered a building used for growing and preparing marijuana for medical use to evaluate equipment. Flammable vapor exploded after a light switch was activated. The employee was hospitalized with burns to their hands, arms, face, and upper torso.",1
"An employee was weighing a dog for an examination. The dog bit her left wrist, causing four lacerations and two broken bones.",1
"An employee was exiting the cab of a truck. The employee slipped and fell to the ground, suffering broken ribs.",1
"An employee was throwing trash into a compactor. He tripped over a small paint rack and fell backward, suffering a hip injury.",1
"An employee tripped over some gym equipment, resulting in a fractured shoulder.",1
"An employee fell backward off a platform, landing on the ground and suffering multiple injuries. The employee was hospitalized.",1
"An employee was leaving the building when she tripped and fell off a step onto the concrete floor, resulting in a fractured right ankle.",1
"An employee was driving cattle when one of them turned. The employee slipped and fell to the ground, breaking her right wrist.",1
"An employee was washing the drum of a cement truck when the hose he was using was caught on the rotating fin inside the truck. His hand was pulled into the drum. The employee sustained injuries to his right hand and right arm, as well as finger and thumb amputations.",1
"An employee was operating a rider jack to pick up a metal picking table when her right ring finger was caught between the unit and the picking table, resulting in a crush injury that required surgical amputation.",0
An employee was struck by a trackhoe in the lower left leg. The employee's ankle was broken and lacerated.,1
"The cable on a truck lifting a cement hopper broke. The hopper pinned an employee against a catwalk guardrail, causing multiple broken vertebrae.",1
An employee was maneuvering a steel pipe (blind) during a rigging operation. A malfunction caused the blind to land on the employee's left hand resulting in amputations to the index and middle fingers at the first joint.,1
An employee was clearing stuck dough from a chunker. The chunker cycled and its blade crushed the employee's left ring finger. The finger was amputated.,0
An employee was setting up a brake press when the press amputated their fingertip.,0
"An employee was getting hand soap from the top shelf of a rack. The racking caught a ring on her thumb, causing an amputation to the thumb.",1
"An employee was moving a belt back and forth to free up a stuck motor. The belt tension loosened, allowing the belt to move back, catching the employee's finger in the belt pulley. They sustained a left thumb tip amputation.",0
"An employee was wrapping a pallet when they were struck by a forklift, resulting in a broken ankle and crushed toe.",1
"An employee and a co-worker were rigging down a pump hose. The employee grabbed a wing nut to spin if off when his co-worker swung a hammer to loosen the wing nut, striking the employee's left index finger and resulting in a displaced facture on their finger.",1
"On August 12, 2022, at 8:58 p.m., a temporary employee was driving a forklift when they made a sharp turn and the forklift tipped over. The employee jumped off the forklift and their left leg became trapped under the top bars of the lift, resulting in multiple fractures and a damaged kneecap.",1
An employee's right arm was lacerated by a machine blade.,1
"An employee was sanding a shaft on a turret lathe with strips of sandpaper. The sandpaper caught on a shaft, causing it to wrap around the shaft and contact the employee's gloves, pulling them off while pulling the employee's left hand into the shaft. The employee suffered lacerations to their hand and dislocated and broken fingers that required hospitalization.",1
"An employee was on the fourth rung of a ladder, approximately 4 feet above the ground, to take a board out of a lumber rack. The employee lost his grip and fell sideways into a dumpster, resulting in broken ribs and a collapsed rung.",1
"An employee loaded a single stick of 6-inch pipes onto this trailer. There was dunnage under the front end of the pipe. The employee asked a co-worker to assist him by lifting up the end of the pipe so he could place dunnage under the back end. When the back of the pipe was lifted, the pipe shifted and started to fall off the trailer, catching the employee's arm between the pipe and the trailer. The employee suffered a broken elbow.",1
An employee was transporting a patient when she sustained a back injury.,1
"An employee was walking across a truck-weighing scale. She tripped over the lip of the scale and fell, breaking her left wrist.",1
"On August 12, 2022, an employee was working on a deflash press when it caught their hand, breaking four fingers.",1
"An employee was installing insulation in an attic. When he came down from the attic for his break, he developed dehydration- and heat-related body cramps, then lost consciousness.",1
"An employee developed nausea and body cramps after working for several hours. The employee was hospitalized, suffering from dehydration.",1
"An employee was putting catering bags on a shelf using a two-step stool. When descending the step stool, she missed the bottom step and fell onto her left hip, resulting in a fractured femur and hospitalization.",1
A blister on a wildland firefighter's hand became infected. He was hospitalized.,1
"An employee tripped and fell in a hallway, breaking her left humerus.",1
An employee tripped over the threshold while entering a building. The employee fell to the floor and suffered broken vertebrae.,1
An employee was bolting on a wheel. The employee's ring finger was caught between the wheel and a caliper and amputated.,0
"An employee was standing over a hydraulic cylinder, unpinning a saddle clamp that held the cylinder in place. When the clamp came free, the employee fell to the deck and suffered a broken knee and wrist.",1
"A pickup truck door closed on an employee's little finger, amputating the tip without bone loss.",0
A postal service employee was exiting their vehicle to deliver a package when they twisted and broke their left ankle.,1
"An employee was replacing a coolant hose in a car when the hose ruptured and sprayed hot coolant onto the employee, resulting in burns to their face and chest.",1
An employee was petting a 115-pound bulldog in the lobby of a building when the dog bit the employee's face and neck.,1
"An employee was on a roof, throwing trash onto a trailer. He slipped and fell to the dirt ground, breaking both tibias.",1
An employee was loading a roll of corrugate onto a core-winder when the roll fell over striking and fracturing the employee's right leg.,1
"An employee stepped outside a building to take a break when they were attacked by a pack of dogs, resulting in bites all over her body with severe injury to her arms and lower legs.",1
"An employee was changing a line hook-up for production to clean-in-place. After he tried to loosen a clamp, steam and water hit the right side of his body, causing second-degree burns on his torso, right arm, and thigh.",1
"A forklift backed out of a trailer and struck an employee, pressing him against another forklift. The employee suffered leg and back fractures and internal bleeding.",1
"On August 13, 2022, an employee was going to lift a 3,000-pound steel coil with an overhead crane. When the employee tried to move a wood coil spacer, the coil shifted and crushed his hand against another coil.",1
"An employee became overheated and tired after working on a maintenance project for 30 minutes. The employee was hospitalized, suffering from dehydration.",1
"An amusement park employee was dismantling a ride when he fell 7 feet off a platform to the ground below, resulting in a broken back.",1
An employee was walking down a hallway toward the nurse's station when she tripped and fell. Both of her shoulders were fractured.,1
"At 2:56 p.m. on August 14, 2022, an employee was transferring a solution of sodium hydroxide and water into a bucket when it splashed onto the employee's right hand. The employee suffered a third-degree burn to the back of the hand and the index finger.",1
"An employee was trying to secure a clamp connecting a hose to a tank. The hose separate from the tank, and the employee was sprayed with a solution of water and 4 percent sodium hydroxide. The employee suffered irritation to the face and right eye.",1
"At 5:00 p.m. on August 14, 2022, an officer in a canine unit was bitten by one of the dogs on the unit. The officer was hospitalized.",1
"On August 14, 2022, an employee suffered an asthma attack, brought on by a chemical treatment two days earlier, while cleaning an upstairs area. The employee was hospitalized.",1
An employee was working on a rig floor when a swivel flipped over and pinned the employee to the deck. The employee suffered a broken collarbone.,1
"An employee was traveling on a forklift. Another forklift began moving when the employee's forklift was about 6 feet away from it. As they tried to avoid each other, both turned, then stopped. The right-side clamp from the second forklift entered the standing area of the employee’s forklift. The second forklift then backed up, and the clamp broke the employee's right big toe and ruptured a tendon in the foot.",1
An employee's right middle finger entered a grinder and was amputated at the first knuckle.,0
"An employee was trying to light a cigarette in the cab of a truck. Fumes from a can of starting fluid ignited, and the employee suffered second-degree burns to the hands, arms, and neck.",1
"A plastic pipe was being lifted in the air when its sling came loose, causing the pipe to swing around and strike an employee. The employee suffered rib fractures.",1
"At 2:30 a.m. on August 15, 2022, an employee's left middle finger was caught in a pinch point in a machine. The fingertip was amputated.",0
"On August 15, 2022, at approximately 3:30 p.m. an employee was performing construction on powerlines when he reported that he was not feeling well and was having pain and tingling in his lower right arm. The employee was instructed to get in the cab of a bucket truck to cool down and drink fluids. After approximately fifteen minutes, the employee was lying beside the truck with pain and cramping to his arms and legs. The employee was hospitalized for heat stroke.",1
"An employee fell off the forks of a moving skid steer and was run over, suffering a broken ankle.",1
"An employee was traveling from an office to a warehouse using a knee scooter. The scooter encountered a broken piece of wood on the floor, stopped suddenly, and overturned. The employee fell to the concrete floor and suffered a broken right-side rib.",1
"An employee was manually moving empty pallets in a warehouse. The employee struck their head on a racking system, suffered head injuries, and was hospitalized.",1
"An employee was walking toward a machine to turn it back on when his leg gave out. He fell, breaking his left ankle and fibula and required surgery.",1
A city mail carrier had been performing normal duties that include walking and driving. The employee sustained heat sickness.,1
"On August 15, 2022, an employee working as a courier was using a step aid to access a catwalk when he fell from the step aid down to the working surface below injuring his right hip. The employee was hospitalized.",1
"An employee was operating a concrete buggy and was transporting concrete. As the employee was driving the buggy up the parking garage ramp the buggy stalled. The employee stepped off the buggy and the buggy then rolled back, crushing the employee's ankle against some cast iron pipe that was being stored near the location.",1
"An employee was found at the bottom of a loading dock, having suffered head injuries and possible facial fractures.",1
"An employee was helping with a melting pot at a pit. The employee became ill and was hospitalized, suffering from dehydration caused by the heat from the melting pot. The incident occurred during a training activity.",1
An employee was pulling weeds at a job site when they were bitten by a poisonous snake on their right hand.,1
"While conducting maintenance, an employee was feeding wire into a baler machine. As the employee was guiding the wire, the machine started; it broke and lacerated the employee's left arm.",1
"An employee was setting an 8-inch-diameter overflow pipe in a tank shaft. His left little finger was pinched between the pipe he was lowering and the fixed pipe, and was amputated at the first knuckle.",0
An employee was removing product from a drip pan under a conveyor. He braced himself with his left hand on the conveyor framework near the drum motor. His left glove became caught on the outside of the drum motor causing his hand to be pulled in between the belt and the drum motor resulting in a laceration to the hand and a fractured middle finger.,1
A portable conveyor system was being used to dump compost into a receptacle. An employee was clearing a jam from a chain and sprocket assembly on the conveyor system when the chain and sprocket caused an amputation to the employee's finger. The assembly was unguarded at the time.,0
"At 9:45 a.m. on August 15, 2022, an employee was performing final cleanup in a grain bin containing soybeans when a paddle conveyor caught his right leg. He suffered an amputation to the leg below the knee.",1
"On August 15, 2022, an employee was in a lift trimming a tree when they fell from the lift, resulting in a shattered knee.",1
"An employee was building a large custom punch press machine for a customer. The employee was inserting nuts into the feed port when the hydraulic press actuated, catching and amputating his fingertip.",0
"An employee was operating a brake press to bend metal. His right-hand fingers were caught in its point of operation, and he suffered amputations to four of them.",1
A falling 4-by-1 piece of wood struck an employee's left forearm as he was trying to protect his face from it. He suffered a bruise on the forearm and a broken nose.,1
"On August 15, 2022, an employee was on an all-terrain vehicle (ATV) when it struck a roll of flexible irrigation tubing that was on the side of an established road. The employee's right leg was broken.",1
"An employee was cutting a sewer pipe with a chop saw. The saw kicked back and struck the employee in the face, lacerating the face and jaw.",1
An employee was working in the back room putting boxes on carts to stock the store. He suffered a heart attack.,1
"An employee was painting the outside of a residential structure from a ladder. He fell from the ladder to the ground, suffering broken ribs and bruising.",1
An employee was helping to conduct a science experiment at a summer camp when something ignited and caused the employee's sleeve to catch fire. The employee sustained a burn to their right arm.,1
An employee was guiding a pallet through a breakdown machine for disposal. The employee's left hand was caught and crushed between the pallet and the machine.,1
"An employee was working on a well servicing rig when they fell off the rig deck to the ground below, resulting in a broken right leg.",1
"An employee was packing a crate when they slipped on debris and fell to the ground, resulting in a back injury.",1
"An employee fell from a steel beam. His fall protection caught him, but the momentum swung him into a concrete block wall. His head struck the wall and he was knocked unconscious, suffering a skull fracture and a brain bleed.",1
"A 16,000-pound hammer crew set up a tool on top of another tool to remove the scales/trash from the bottom tool. The hammer began to operate. On the second punch, the top tool flew off and punctured an employee's upper left leg, breaking the thigh. The employee was hospitalized.",1
"An employee was moving feed in the warehouse area of the store. When stepping up on a forklift, he grabbed the steering wheel to pull himself up and then slipped and fell to the floor. The employee sustained a broken femur requiring hospitalization and surgery.",1
"An employee was using a miter saw to cut a plastic U-channel when a finger on his left hand was cut by the saw, resulting in a fingertip amputation.",0
"An employee was taking pH readings for a spill of liquid phosphoric acid. He slipped on the spilled acid, fell into a sump pump pit, and then fell into the acid pool. He sustained burns to the lower legs and hands and was hospitalized.",1
An employee worked on 8/16/2022 as a crane operator. The next day he was hospitalized for dehydration and heat stroke.,1
An employee went outside to talk to shoplifters in the parking lot and was assaulted by four people.,1
"A sanitation truck started rolling away without its driver. The driver ran to the truck and began to get in to stop it, but it side-swiped an SUV. The driver was pinned between the SUV and the sanitation truck, suffering a broken arm, injuries to both legs, and an amputated fingertip.",1
"After a package delivery at a client's house, an employee developed heat-related muscle cramps. His legs then locked up.",1
"An employee was using a sledgehammer to help remove an aluminum cast from a mold. During a swing of the hammer, his left hand slipped down its shaft and his index finger was caught between the head of the hammer and the mold. He suffered an amputation to the finger.",1
An employee fell off a ladder while counting inventory. He landed on his left foot on the concrete floor about 5 feet below and suffered an open dislocation of the ankle.,1
"An employee was on a catwalk scraping old drywall when he fell approximately 16 feet to the ground below, resulting in a fractured spine. The catwalk was not guarded at the time.",1
"An employee was removing a drill pipe from a derrick. When the employee reached out to remove the winch line, the pipe rotated and the line caught the employee's left index finger. The finger was amputated at the first joint.",0
"An employee was standing on top of a tanker trailer, preparing to enter, when he slipped and fell approximately 12 feet to the concrete floor and suffered a dislocated shoulder and torn arm muscles.",1
"An employee was using a pry bar to break some square tubing on a metal skid when his hand was pinched between the pry bar and the skid, resulting in a left index fingertip amputation.",0
"An employee was closing a grocery delivery door. The door caught her left hand, causing an amputation to her index finger at the first knuckle.",0
An employee's right hand was caught in the chain and sprocket of a conveyor belt. The ring finger was partially amputated.,1
"An employee used an extension ladder to access a second floor balcony/deck of an apartment. The employee started removing the floor boards of the deck when the balcony collapsed. The employee fell 14 feet to the ground and was hospitalized with injuries to the back and legs, resulting in paralysis.",1
An employee was using a forklift to unload a truck. The forklift drove off the dock and the employee's foot was crushed.,1
"A conveyor had been repaired. When it was reactivated, it caught an employee's hand, lacerating it and breaking a knuckle.",1
"Two employees were transporting a large worktable. As they were assembling it together, the top moved inward and the injured employee's left thumb was fractured and partially amputated. The employee was hospitalized.",1
"On 8/16/2022, at 12:00 PM, an employee was observing the unloading of raw material from a tanker truck into the plant. When the hose was detached, H2SO4 93% (sulfuric acid) sprayed onto the employee's lower back, buttocks, and leg on the right side. The driver of the truck was also sprayed with sulfuric acid. The employee was hospitalized.",1
"An employee was moving a loading ramp from a loading dock. The employee fell to the ground, suffering broken ribs. The employee was hospitalized.",1
"An employee was backing up a forklift, staging pallets for shipping. The employee's hand was pinched between the forklift's safety cage and a pallet, causing amputations to four fingers (including the complete amputation of the ring finger).",1
"An employee was working as a helper on a residential waste collection route. After beginning at 6:00 a.m., he felt ill and developed cramps at 1:00 p.m. He was hospitalized, suffering from heat stress.",1
An employee was pulling/cutting plastic wrap off of boxes when plastic wrap gave way and the employee fell backward on the floor sustaining a broken hip.,1
"An employee was trying to turn off a leaf blower. A fault in the safety guard caused the blower fan to cut the employee's left little finger, causing a fracture.",1
An employee was using the blast booth. He tried to turn over a 9' x 5' metal stand weighing 600 lbs. when he lost his footing and dropped the stand. The stand came down on his left ring finger. The finger was fractured and lacerated.,1
"On 8/17/2022, at 2:25 PM, an employee was making a delivery to a customer. The employee was moving a two wheel manual handcart down from a tractor trailer on a grated metal ramp when they slipped and fell on the ramp. The employee attempted to brace his fall with his left hand and the left little fingertip was caught in the grating of the ramp and amputated.",0
"An employee was walking across the manufacturing floor toward the break room when they tripped and fell, breaking their hip.",1
"An employee was putting lumber on a powered conveyor. When he flipped the lumber over with his gloved right hand, the roller caught his right index finger. He suffered an amputation to the finger.",1
"An employee was conducting maintenance on a trolley conveyor, replacing a friction wheel. The wheel moved and caught the employee's right little finger against the motor bracket, amputating the finger.",0
"While draining a pump, an employee was splashed with sulfuric acid and sustained burns.",1
"An employee was operating an ATV when it encountered a truck during a turn. The ATV went out of control; the employee struck the truck mirror, slid down the truck, and then made contact with the trailer. The employee suffered a punctured kidney, a bruised lung, fractured vertebrae, and a fractured rib.",1
"An employee was readying a machine to operate when he noticed the trim suction of the right tube was not as strong as the suction of the left tube. Finding a small gap where the tube was seated in the chopper inlet, he began to re-insert the tube back into the inlet. He then noticed a piece of tape on the edge of the inlet; as he was removing it, the suction from the trim blower pulled in his left hand. The trim chopper blade partially amputated his index and middle fingertips.",0
An employee was using the hind saw to separate the round from the loin when his right middle finger was partially amputated.,1
"An employee was trying to calibrate a gate. The employee placed light pressure on the equipment, causing the programmable logic controller (PLC) to attempt another calibration. The sprocket caught his glove and right index finger and amputated the fingertip above the first knuckle.",0
An employee was sprayed with 12.5 percent sodium hypochlorite when a line burst on a pumping unit. The employee suffered a chemical burn.,1
"An employee was stepping out of his truck when his leg gave way and he fell to the pavement, striking his face and injuring his neck. The employee's arms were numb and he was taken to the hospital. The employee required surgery for a spinal injury.",1
"An employee sustained an electrical shock while performing stick welding, resulting in an arrhythmia.",1
An employee was out delivering mail and was not feeling well. The employee was hospitalized for heat exhaustion.,1
"An employee approached an electric arc furnace in preparation to lance a tap-hole. As they approached the tap-hole, a cooling panel located inside the furnace leaked water onto the molten metal in the furnace. An eruption of steam and fire occurred through the tap-hole, causing the employee to sustain first and second-degree burns to the thighs, lower abdomen, face, throat and nose . They were hospitalized.",1
"An employee was working on a pasta-making machine. The employee had removed and cleaned the screw. He was trying to line the screw up to slide it back into the barrel. When the screw was tapped with a mallet, his finger was caught between the screw and the wall of the barrel, causing an amputation to the finger.",0
"An employee was loading boards onto a panel saw while troubleshooting. The employee's right hand contacted the saw blade and their index, middle, and ring fingers were amputated.",0
An employee was pulling a metal flat cart with a heavy load when her right foot got caught under the cart. The lower front edge lacerated her Achilles tendon area.,1
An employee was stabbed in the back with a knife in a store parking lot.,1
"An employee was operating a dump truck on a dirt hill at a construction site when the truck ran off the side of the hill, rolling approximately 20-25 feet down the incline, landing on its wheels. The employee was hospitalized with neck and back vertebral fractures.",1
An employee was making a pride loop to tie a horse. The horse got aggressive and the loop closed around the employee's left hand amputating the fingertips.,0
"On August 17, 2022, at 10:00 AM, an employee was sorting an order of 3-inch-by 20-foot angle and flat stock steel. The bundle of material was elevated about 4 feet on forklift forks. When the employee cut the banding on the bundle, the bundle rolled off the forks and landed on his left foot. The employee's left big toe was amputated and the adjacent toe was fractured. The employee was hospitalized.",1
An employee was using furniture movers to manually push a magnetic coil into an oven. The form plate of the oven lowered onto the employee's finger causing a partial amputation.,0
"An employee's husband came to the store and was trying to get her to go home. When she refused, the husband pulled out a gun and shot the store window. The employee turned to run and the husband shot his gun again. The bullets struck another employee in the shoulder and back. The injured employee was hospitalized for surgery.",1
"An employee was near the top of a ship ladder when he fell, landing on the floor about 10 feet below and suffering injuries to the hip, wrist, and head.",1
A temporary employee became dehydrated (suffering from lightheadedness and hand tingling) on returning from a lunch break.,1
"An employee tripped over a trash cart and fell to a hallway floor, suffering fractures to her left elbow and hip.",1
An employee was bitten by a snake in a wooded area.,1
An employee was bitten by a venomous snake. He was hospitalized.,1
An employee was working as a flagger when he started having chest pains and cramps. He was hospitalized for dehydration and heat exhaustion.,1
"An employee was using a crane to hook into an eyelet. As the crane was being lowered, the upper block of the crane fell and amputated the employee's left index fingertip.",0
An employee was struck in the left leg by a scrubber that was being moved by a trolley chain hoist. The employee's leg was broken.,1
"A five-member crew was replacing a wood utility pole. As the pole was being lifted by a utility truck, the injured employee was removing the cover that was over the hole. The pole fell from the rigging and struck a retaining wall, bounced, and then fell to the ground striking the injured employee. The employee's right arm was amputated above the elbow. The employee also sustained injury to their right leg.",1
"A five-member crew was replacing a wood utility pole. One of them was at the hole, removing the cover over it, while a utility truck was lifting the pole. The rigging rope that was lifting the pole broke; the pole fell, struck a retaining wall, bounced, and fell to the ground, striking the injured employee. The employee's right arm was amputated above the elbow.",1
"An employee was operating a machine to manufacture paper bags. As the employee was trying to feed paper into the machine, a roller caught the employee's arm. The employee was hospitalized to relieve swelling.",1
An employee was cleaning bathrooms using muriatic acid. The employee experienced burning in their throat and trouble breathing.,1
An employee was working with a trenching crew to run conduit to a pad-mounted transformer. The employee made contact with a component of the transformer and was exposed to an arc flash. The employee was hospitalized with burns to the right elbow and forearm.,1
"An employee was moving a heavy pedestal into place under a pump. His left index finger was pinched between the edge of the pedestal and the edge of the pump case, and the fingertip was partially amputated.",0
"An employee was removing meat from a carcass and tossing the meat onto a conveyor. When he reached through the moving cone line to retrieve a misplaced carcass, the carcass/cone caught their upper left arm and rammed it into a COVID-19 barrier pole. The employee's humerus was fractured.",1
"An employee was repositioning equipment with exposed, live electrical components when their left hand contacted the main circuit breaker, resulting in a 480-volt shock to the hand.",1
"An employee of Bennet Heat Treating was clinching metal parts and placing them into a quench tank. When he placed the clinched parts into the tank, flames erupted and burned his face. He was hospitalized.",1
An employee was emptying dust collection bags and experienced a severe asthma attack requiring hospitalization.,1
"An employee was disassembling a U-joint. The U-joint was in a vise, and the employee was striking it with a ball peen hammer to break it free, when a piece of metal entered the employee's eye.",1
"An employee was walking in the yard of a client's residence when they slipped, tripped, and fell onto the ground. The employee was hospitalized with a fractured arm and hip.",1
"An employee had just manually cleared a steel grate at a sewage inlet trough. He fell from a fixed ladder to the concrete floor, suffering lacerations, contusions, and hairline fractures to the head, neck, right knee, and right tibia.",1
An employee was cleaning/foaming the floors between lines 2 and 3 when they slipped on a piece of chicken skin and twisted their leg. The employee was hospitalized with a fractured tibial plateau.,1
An employee was driving an enclosed fork truck in the frame yard when the right fork struck the concrete base of a column. The employee struck his head on the inside of the cab and sustained a cervical fracture and a contusion to the head.,1
An employee was walking in the kitchen galley when she tripped over a cord that was hanging off the back of a portable hotbox. She fell to the floor landing on her right side/bottom. The employee required hip surgery.,1
"Employees were performing an equipment rebuild on a shipping sorter machine. While feeding the chain to other employees, who were guiding it back through the machine, the injured employee's right ring finger became caught in the chain resulting in an avulsion, laceration, and partial amputation to the finger.",0
"On August 18, 2022, an employee was opening an office door when her thumb was caught between the door and the door jamb. The tip of her thumb was amputated.",0
"An employee was walking through the rebar grid when they saw a subcontractor about to fall, and sped up to assist the subcontractor. The employee then tripped and struck their face on the horizontal rebar sustaining injuries including a possible fractured neck and torn muscles in the forehead.",1
"An employee was tripping out pipe and racking it. The employee lost their footing and their right hand was caught between pipes, which broke two of the employee's fingers.",1
An employee was working on a vessel in a channel when it began to take on water in a storm. The employee pushed out a window to exit the vessel. The glass lacerated his hand and he ingested water. He was hospitalized.,1
"An employee was positioning a conveyor in the back of a trailer to move materials. The conveyor extended toward the employee, pinning them against materials. The employee was hospitalized with a bilateral pulmonary contusion.",1
"An employee was working about 20 feet above the floor, installing decking to support a roof. The employee slipped on a wet surface and fell from the roof to the floor, suffering a broken left shoulder, left elbow, and left side of the pelvis. The employee was hospitalized.",1
"On 8/18/2022, at around 8:15 AM, an employee was clearing plastic from the trimmer of a 4-head blow molding machine when the machine started and the employee's left arm was pinched by the trimmer. The employee was hospitalized with a fractured left arm.",1
An employee was in a trailer loading packages. A box struck his head and the employee sustained a concussion.,1
A copperhead snake bit an employee's left arm while the employee was clearing brush.,1
Two employee's bumped into each other in a warehouse. One fell and suffered a broken left hip.,1
An employee had been riding as a passenger in a golf cart. The employee tripped on the cart while exiting and hit their head on the sidewalk resulting in a laceration over the right eyebrow.,1
An employee's middle finger was caught in a brake press. The employee suffered a partial amputation to the finger.,0
"A hot water supply line coupler separated near an employee, who was evaluating an unrelated pump nearby. The water caused first- and second-degree burns to the employee's arms.",1
"An employee had been removing 8 feet of excavation fencing. After taking a break, the employee went into cardiac arrest.",1
An employee was cutting short loins on a band saw in the meat room when the band saw blade amputated the top of his right middle finger.,0
"A truck driver was manually unhooking a trailer. The driver hooked an extension bar to the manual handle for the fifth wheel and began to pull. The extension bar slipped, causing them to fall backward to the concrete ground and sustain a broken vertebra in the lower back.",1
An employee tripped on steps leading up from a basement to the first floor. The employee hit their forehead and broke their left upper arm on the stairs.,1
"During a surgical operation, a patient woke up. While holding the patient down in the operating room, the resident physician suffered a lower back injury. He was hospitalized.",1
"A dump truck was trying to avoid rocks on a trail when its left-side wheels left the trail. The truck rolled about three times, and the driver suffered a neck strain, bumps and bruises, a laceration to the forehead that required stitches, and a laceration to the right forearm.",1
An employee was running a DSL line in an attic when a rafter broke causing the employee to fall through the ceiling onto the concrete floor below. The employee's left ankle was broken.,1
An employee was handed a paint spray gun to unclog. The gun went off and shot paint into his right hand. He was hospitalized.,1
"Two employees were riding in a utility task vehicle when a front wheel locked up during a turn. The vehicle turned onto its side, and the employee who was a passenger suffered a broken leg and required surgery.",1
"An employee was trying to turn a pallet jack to maneuver out of a tight place. The pallet jack accelerated, ran into her, and broke her leg.",1
"An employee was performing maintenance on a belt-tracking fault on a conveyor. The employee went under the machine to adjust the belt with a screwdriver when the rollers engaged, pulling the employee's screwdriver and right arm into the rollers. The employee sustained a forearm fracture.",1
An employee was clearing a clog on a mixer press when the automatic gate actuated and amputated his right middle finger.,0
An employee fell off a ladder and was hospitalized with a broken collarbone.,1
An employee was installing temporary roof decking on a one-story building. He fell approximately 22 feet to the ground and suffered a broken collarbone and two broken ribs. He was hospitalized.,1
"On August 19, 2022, an employee was operating a battery-powered pallet jack when it went out of control. The employee jumped off the pallet jack and struck a wall, suffering a broken right heel.",1
An employee was working to remove trailer brakes. The employee hit a metal pin with a hammer and metal particles flew into their eye.,1
"An employee was climbing a portable ladder. She fell from the ladder to the concrete floor about 4 feet below, striking her head on the floor and suffering a head injury requiring hospitalization.",1
"An employee was maneuvering a steel plate, hoisted by a crane, into place before setting it down. A clamp was released and the plate dropped a few inches, pinching the employee's left middle finger and amputating the tip (without bone loss).",0
"On August 19, 2022, an employee fell from a shed roof to the ground about 16 feet below. The employee suffered broken vertebrae.",1
"On August 19, 2022, an employee was using a forklift when his shoelace became caught in racking. While trying to free his shoelace from the racking, his foot became caught between the equipment and the rack's bottom protection barrier. The employee sustained tissue damage to his foot, which required surgery to repair.",1
An employee was cleaning out a palletizer. The palletizer moved and its platform plate pinned the employee's left thigh against the frame of a holding table surface. The employee sustained contusions to the leg.,1
The load from a powered pallet jack dropped onto an employee's foot. He was hospitalized for toe fractures.,1
"An employee was using a table saw to cut small pieces of wood. He was reaching for a piece of wood when his thumb contacted the blade, which removed the pad of the thumb.",0
An employee was trying to close the door of a railcar. The employee was pulling backward on the stuck handle latch when the handle released causing the employee to lose their grip and fall to the ground on the same level. The employee sustained seven fractured ribs.,1
A store detective was shot in the abdomen while confronting a suspected shoplifter. The detective was hospitalized.,1
"At 11:45 AM, on August 19, 2022, two employees arrived on-site to install a brake hub and brakes on a pump jack using a cherry picker. While performing work on the pump jack, the arms of the pump began moving and struck the bucket of the cherry picker causing an employee to fall from the bucket and sustain a broken neck.",1
"Two employees were on a suspended scaffold, painting the exterior wall of a building. One side of the scaffold collapsed. One of the employees suffered an impalement to the middle of the back and a broken hip.",1
"An employee was trying to remove two stacked 25-pound plates from the top of a press machine. The plates fell, and his left hand was caught between them. He suffered an amputation to the middle finger.",1
"An employee was working on top of an 8-foot-high car-hauling trailer, fixing hydraulic components. He hit his head and fell from the side of the trailer to the ground. He suffered a brain bleed, head trauma, a broken collarbone, a compound fracture in the right arm, a broken left wrist, and broken ribs.",1
An employee was cleaning a metal frame when its edge cut his forearm. He was hospitalized.,1
"An employee was on a dock, looking for the next trailer to load, when a forklift was making a right-hand turn onto the trailer and hit the employee. The employee suffered a broken ankle and lacerations to the hands, head, and left leg.",1
"An employee was driving a reach truck down an aisle. The truck drove through a tomato spill, slid into a wall, and pinched his leg against the wall. The leg was cut.",1
"An employee was backing their electric pallet jack out from underneath storage racks. While backing out, the employee's hand was caught between the rack and the backrest of the pallet jack, resulting in a fracture to the right hand and tendon injuries to the middle and ring fingers.",1
"A front-end loader was moving a concrete barrier. The barrier fell onto a nearby employee, landing on her left leg and pinning her to the ground. The leg was broken and she was hospitalized.",1
"An employee was bending over to pick up a marker from the floor. A whiteboard fell from its base and struck the back of the employee's head, causing a head injury.",1
"An employee was climbing a fence in pursuit of two people who had been trying to break into a facility. He fell from the fence, suffered a broken left leg, and was hospitalized.",1
"An employee was on top of a conveyor, trying to get a piece unstruck. The lift table raised and the employee's ankles were caught between it and the frame. The employee suffered a fracture to the left ankle and a ligament pull to the right ankle.",1
"An employee was clearing a paper jam in a cup maker. The machine's manual wheel was turned, causing a crushing injury to the employee's right hand. The employee suffered an amputation to the index finger.",0
An employee was helping assemble a forklift used to perform maintenance on a wind tower. A 250-pound attachment fell off a forklift and broke the employee's foot.,1
"An employee was preparing medicine for residents in the medication room. When the employee tried to walk away from the drink station, her foot got stuck on an area of the carpet that was sticky from spilled beverages and she fell. The employee was hospitalized with a fractured right tibia and fibula and required surgery.",1
"An employee was investigating a jammed garage door on a storage shed. One of the two door cables had come off the pulley; the other was stuck. When the tension was released on the stuck cable, it fell off the pulley, pulled taut around the employee's right thumb, and amputated half to three-quarters of an inch from the tip. The employee was hospitalized.",1
"An employee was leaving their vehicle to place cones on the street for traffic control. A car struck the employee, who suffered a broken cheekbone. The employee was hospitalized.",1
An employee was driving a utility cart down to the dry dock. While preparing to pass a semi-truck the employee stopped the cart. He was then pinned into the driver's seat by the truck's frame and then dragged. The employee suffered bruising and internal bleeding of the spleen.,1
An employee was pen riding when he fell from his horse. He was hospitalized for a skull fracture and intracranial bleeding.,1
"An employee was performing maintenance on a section of overhead conveyor. A belt in the conveyor next to him caught his right hand, lacerating and abrading it.",1
An employee tripped on a forklift mat in front of a door. She fell to the concrete floor and suffered a broken left humerus.,1
"On August 21, 2022, an employee parked a powered pallet jack and started walking. The employee tripped over a pallet and fell on the floor, sustaining a broken femur.",1
"An employee was operating a utility task vehicle when it overturned and struck him, causing broken bones. He was hospitalized.",1
"A stagehand was disconnecting cables from a video board when he fell off the stage to the ground below. He suffered a laceration to the back of the head, a concussion, and a possible broken rib.",1
"At about 12:30 p.m. on August 21, 2022, an employee was moving steel bread racks when two of them collided, crushing the employee's right ring finger. The employee suffered a fingertip amputation along the nailbed.",1
An employee fell 8 feet into an excavation for a leaching pool and sustained back injuries.,1
"On August 22, 2022, an employee began experiencing neck and right shoulder pain during her shift after performing job-related tasks such as repetitive lifting. She was hospitalized for a right shoulder sprain and a pinched nerve.",1
Three welding employees were exposed to carbon monoxide from a malfunctioning forklift. One employee was hospitalized.,1
"An employee was cleaning machinery when their finger was caught in a screw conveyor, resulting in a partial amputation.",0
"An employe was adjusting a mixing machine. The machine caught the employee's hand, causing a finger amputation.",1
"An employee was assembling an airlock. When he turned a rotor, the two middle fingers of his left hand were pinched between its blades. The fingertips were amputated.",1
"An employee was changing out a die on an ironworker machine. The machine engaged, and the employee's index finger was caught between the plate stripper and the material rest. The fingertip was amputated.",0
"An employee exited a vehicle and walked towards the service lane bay. The employee fell on the floor of the service lane bay, that was wet from rain, and fractured a hip.",1
"At about 2:45 p.m. on August 22, 2022, an employee was using a hand grinder to grind down a weld bead on a shaft. The grinder cut through the bead, and the change in momentum caused his left hand to contact the grinder wheel. He suffered a laceration to the back of the hand between the thumb and index finger, and was hospitalized. The grinder was not guarded at the time.",1
"An employee was trying to turn off an auger because of rain. He slipped on a wet surface and pushed the auger cover, exposing the auger. His foot was entangled by the auger, causing the amputation of his right leg.",0
"An employee was working with a piece of equipment that sealed plastic bags with poultry in them. The equipment closed on the tip of his left ring finger, amputating it.",0
An employee was digging a hole by hand to repair a cable outage when he started feeling a burning sensation in his chest and got a headache. He had been digging for approximately two hours in 81°F heat and 70% humidity. The employee went home to rest and was later hospitalized for a heart attack.,1
"At about 3:00 p.m. on August 22, 2022, an employee's left hand was caught in a conveyor belt he was working next to. Three fingers on the hand were amputated.",1
"An employee was removing a pallet of merchandise from a truck with a pallet jack. He fell while pulling backward, and his head struck the concrete floor. He suffered a subdural hematoma and was hospitalized.",1
"An employee was trying to take the slack out of a winch cable. The hook slid and pinned the employee's right hand against the winch controls, breaking the hand and lacerating the little finger.",1
"An employee was doing repair work on an oil/gas well. While the rods were being spaced out, the elevator caught the bottom of the horse's head and knocked it off. It hit the ground and rolled over on top of the employee, who was working on the floor. The employee suffered a broken pelvis and a broken right femur and was hospitalized.",1
"As it was pushed through a doorway, a plastic linen cart amputated the tip of an employee's left thumb.",0
An employee was picking plastic debris off the floor. The employee tripped over a piece of the debris and suffered injuries to the head and her right side.,1
"An employee tripped and fell into an industrial fan, then onto the floor. Her kneecap was injured.",1
"An employee came into the building from outside. The employee walked onto carpet, then stepped onto tile and slipped and fell to the floor. The employee's shoes were wet from being outside. The employee sustained broken ribs, facial lacerations, and a possible liver laceration.",1
"An employee was collecting waste. A winch cable caught his finger, causing the amputation of his left thumb tip.",0
"An employee was building a box using a pneumatic nailer. The nailer discharged, the box shattered, and the nail punctured the employee's right hand. The employee was hospitalized.",1
"Two employees were working on a baler. The injured employee was at the back of the baler while the second employee was pushing a metal rod from the front of the baler to the back of the baler when the rod struck the injured employee's left eye, causing a laceration that required surgery.",1
"An employee was walking around a teller station when she tripped and fell, suffering injuries to her right knee.",1
"An employee bent over to pick up a 35-pound container of oil. As he lifted it, he sustained two hernias. He was hospitalized and required surgery.",1
An employee was guiding a boat in a haul-out well. His left foot was caught and injured between the boat's anchor and the concrete.,1
"An employee was repairing a conveyor belt. The belt caught the employee's left hand, amputating the index finger.",1
"A veterinarian was placing a muzzle on a dog when the dog bit her right hand, resulting in punctures to her right palm and little finger.",1
An employee was moving a golf club when her foot caught on the strap of a duffel bag on the floor and she fell. She suffered a broken right arm and required surgery.,1
"A clamp truck driver trainee was setting down a roll of paper. The clamp struck the floor and the roll popped out of the clamps. It rolled forward and struck the employee, pinning him against another roll of paper. The employee suffered crushing injuries to the upper legs and was hospitalized.",1
An employee tripped on a curb and suffered a broken arm.,1
"An employee as picking up tools outdoors. The employee became lightheaded and dizzy and was hospitalized, suffering from heat-related illness.",1
"On August 22, 2022 at 12:20 PM, an employee was scraping product from the cooker door when their hand contacted the auger blade. Three fingers were amputated from their right hand.",0
An employee tripped over a fan cord near the register she was working at. She fell and broke her left hip.,1
"An employee was walking through a building. The employee's right arm brushed against a steel girder, which lacerated the employee's forearm and left a metal fragment embedded in it.",1
"At 1:45 p.m. on August 23, 2022, an employee fell off a ladder to the floor. He suffered a broken leg and a possible broken knee and was hospitalized.",1
"An employee was putting up stock on a shelf. She tripped on a pallet and fell to the floor, suffering a broken hip.",1
"An employee was walking down stairs when she missed a step and fell down the stairs to the ground, resulting in a fractured pelvis.",1
"An employee was preparing to cut a mirror on a cutting table. He bumped the mirror, which broke and lacerated his right forearm, severing arteries.",1
"An employee had just loaded a trailer and was still inside it. The dock plate was being moved with a forklift. Its edge snagged under the mast of the forklift, then broke free under pressure and came off the forks. It struck the employee's lower right leg, causing injuries to the ankle that required surgery.",1
"On August 23, 2022, an employee was removing trim waste from a converting machine (pouch machine) when his left index finger contacted the blade. The nailbed and fingertip pad were amputated.",0
An employee was positioning steel pipes on a table. The first pipe rolled backward while the second pipe was being positioned. The employee's left hand was caught between the two pipes and the ring finger was crushed. The employee was hospitalized and required surgery.,1
"An employee was unloading a boom lift from the back of a lowboy trailer. As the lift came off the trailer, the boom rapidly rose and lowered while the employee was in the lift. The employee suffered three fractures to the left leg and one to the right leg.",1
"At approximately 4:00 PM on 8/23/2022, an employee was standing next to a backhoe when they were struck by the basket. The employee was hospitalized with a fractured tibia and fibula.",1
"An employee was installing metal spade plates. A turntable with a pallet of the plates was behind the employee. When this turntable was rotated, it tipped over, and the pallet of spades it carried broke the employee's lower right leg.",1
"An employee was standing on a lift gate with a pallet of product. The lift gate was raised, and the employee's left foot was caught between it and the trailer threshold. The employee suffered a dislocation and an open fracture to the big toe.",1
An employee fell from the top step of a rolling ladder to the floor about 10 feet below. The employee suffered a broken skull.,1
An employee was lifting a metal cover when the cover slipped and fell on their finger resulting in partial amputation of a fingertip.,0
An employee was working on an assembly line when his finger was lacerated.,1
"An employee was hooking up a water hose to clean out an acid line. When he opened the acid line valve, acid came out between the crow's foot connections and burned the employee's chest.",1
An employee was stepping down from a step ladder. The employee fell to the floor and suffered a broken left leg.,1
An employee was inspecting a transportation cart. The employee unplugged a frayed extension cord and suffered an electrical shock.,1
"At about 8:30 a.m. on August 23, 2022, an Icon Mechanical Construction and Engineering employee was hemming a piece of sheet metal with a metal brake. After making the initial bend, he slid the bent end of the metal into the brake. The brake then closed on his right thumb, amputating the tip.",0
"A maintenance employee was near the chipper room area outside of the building using an extension ladder to inspect the 18-inch metal blower pipe that goes into the silo. The base of the ladder kicked out, causing the employee and the ladder to fall approximately 10-12 feet to the ground. The employee's left arm was caught underneath the ladder and all three bones in the arm were broken.",1
An employee was using a pallet jack to transport a pallet into a cooler when a forklift exited the cooler and struck the employee's lower leg resulting in a broken bone.,1
An employee parked and exited a semi-truck. He was walking to the rear of the vehicle when the vehicle rolled back over him. The employee sustained a crushed pelvis and fractures to the collarbone and right ankle.,1
"An employee was working from a flat tractor trailer. A forklift struck some steel pipes; the employee, believing the pipes were about to fall onto him, jumped from the trailer. He landed on his left side and suffered a dislocated left shoulder and a broken left collarbone.",1
"An employee was helping to retrieve a set of keys from a client's floor safe, which was being temporarily stored on the loading dock pending disposal by the client. As a co-worker opened the safe, it became unbalanced and tilted forward. The safe's door struck the concrete floor and dislodged from its hinges. The employee grabbed the safe and attempted to keep it upright so his co-worker could move out of harm's way. The door fell on the employee's right leg causing a compound fracture.",1
"An employee was in a ditch box, using a cutoff saw to cut iron pipe. The saw kicked back and lacerated the employee's left shoulder and neck. The employee was hospitalized.",1
"A temporary employee was performing work in the general assembly area. The employee was using a 2-ton hoist to lift a vehicle battery from a storage crate onto a transfer cart carrier. While lowering the battery onto the carrier, the employee's left ring finger was pinched between the battery and the carrier, resulting in a fingertip amputation.",0
"An employee tripped and fell to the ground at a construction site, breaking his right arm.",1
"An employee was moving a skid steer bucket when the bucket slipped off the hook and crushed his foot, resulting in a broken left foot.",1
"An employee was clearing sand from an auger. Once the sand was freed, the auger engaged and amputated his left little fingertip at the first knuckle.",0
"An employee was conducting core drilling inside a facility. The drill popped out of position, pivoted, and flipped the employee off their feet. The employee landed head first on the concrete pavement and suffered a laceration to the back of the head and a broken right shoulder.",1
An employee had just parked his forklift and was walking to a break room. Another forklift struck him as it was being parked. The employee suffered bruising on the left side of his torso and was hospitalized.,1
"An employee had just stepped off the ladder onto a roof when he slipped and fell, landing on the ground and suffering a broken left heel.",1
"An employee was spotting a pile driver as it was moved from one place to another on a solar farm. The employee's right hand was on a steel beam that had already been installed. The pile driver pinched the employee's right little finger against the beam, breaking it.",1
"An employee was beveling a thin piece of trim on a table saw. The trim broke at the bottom, causing the employee's glove to be pulled into the saw. The saw amputated the tip of his thumb, and he was hospitalized.",1
An employee of TriMark Strategic was removing casters from a skid when a commercial refrigerator being held by another employee fell on his hip resulting in three fractures to the pelvis.,1
An employee was cutting a piece of trim with a handheld jigsaw. The saw amputated the last joint on the employee's left index finger.,0
"An employee was in the back of a vehicle, moving skids of freight to access a shipment for unloading. As he pulled a skid, its plastic strapping/banding broke, throwing him off balance. He fell out of the back of the truck, landed on his right shoulder and back, and suffered injuries to both.",1
An employee was running a paper press. The air tube that feeds leftover paper to a shredding fan became jammed with paper. The employee disconnected the hose from the fan and proceeded to clear the jam when their right index finger was injured by the fan blade.,1
"An employee was exiting a rail car using a mobile ladder stand. The employee fell to the concrete pad below and suffered injuries to the face, the left shoulder, and a neck vertebra.",1
An employee was walking through the woods when he fell through an old well covering. He suffered cuts and bruises to the left leg.,1
An employee was using a torch to trim the foundation for a compressed air tank so the tank would fit in place. His left hand was caught between the tank and the steel bar foundation structure; the hand was crushed and burned.,1
"An employee was installing a solar panel on the roof of a home. The employee slid and fell from the roof, suffering a broken wrist and broken bones in his back. Fall protection was not worn at the time.",1
"On August 24, 2022, at approximately 2:30 PM, an employee was preparing lunch trays. The employee was walking through the kitchen area when they tripped on a leg of a drying rack and fell to the ground resulting in a fractured hip.",1
"An employee was on a baker scaffold, working on an air conditioning duct. The duct broke in half and hit the scaffold, causing the employee to fall to the ground about 5 feet below and suffer a broken left ankle.",1
"An employee developed heat illness at a wind turbine erection work site. The employee was hospitalized, suffering from heat-related muscle injury.",1
An employee was cleaning out a concrete mixer when it started up with him inside. His foot was amputated.,1
"On August 24, 2022, at approximately 5:00 PM, an employee was cleaning off a photo eye on the lamination line. The machine cycled and a gate lowered, amputating the employee's right ring fingertip.",0
"An employee was in a trailer at a loading dock. The trailer pulled away from the dock and the employee fell to the ground, suffering a broken right knee.",1
"On August 24, 2022, an employee was cleaning paint out of an airless sprayer with water. The spray gun jerked and hit his left middle finger with high-pressure paint and water, causing a 1/4-inch injection wound.",1
"An employee tripped in a building's front entrance, falling to the ground and suffering a broken wrist and femur.",1
"An employee was on a roof, securing an anchor for his fall arrest system. When he stepped on a 6-inch-wide roof panel near the roof ridge, it did not hold his weight. He fell to the ground 36 feet below and suffered a broken right wrist, as well as injury to the left wrist.",1
An employee was drilling holes in a road. The drill caught his left ring finger and partially amputated it.,0
"An employee was on a platform where a robotic bread arm could be viewed. His right index finger was caught by a piston on the arm, which amputated the last two joints of the finger.",1
"The injured employee had parked a powered industrial truck (PIT) and exited the PIT. The parked PIT was then struck by another PIT and propelled into the injured employee, knocked them to the ground and running over their left foot. The employee sustained a partial amputation of the left big toe and a full amputation of the left second toe. Toes 3 through 5 on the employee's left foot were broken.",0
"On August 24, 2022, an employee was moving down a frozen storage warehouse aisle on a stand-up forklift when the forklift struck the racks. Her left foot became caught between the forklift and a rack. The employee was hospitalized with a fractured foot.",1
"An employee was installing air ducts. While hanging the duct and connecting pieces, one of the sheet metal duct pieces began to fall. The employee reached out to grab it and lacerated his right palm.",1
"An employee was testing (energizing and deenergizing) a 12,000-volt capacitor bank vacuum switch. The equipment shocked the employee, causing burns to the employee's right elbow.",1
"An employee was using a table saw during the construction of a movie set. The piece of wood the employee was cutting moved, and the employee's hand contacted the moving saw blade, resulting in lacerations to the left index and ring fingers.",1
Two employees were loading paper onto a conveyor belt system. One of them was on the conveyor when it went into reverse. The employee's right foot was pulled into a metal floor plate and injured. The incident took place during a training activity.,1
"An employee was troubleshooting the internal part of an electrical plug. An energized wire popped free from under the plug and contacted the employee's right index finger, burning the finger and the web of skin between it and the thumb.",1
An employee was working in the stockroom when a vehicle drove into and through the store. The employee was struck by debris.,1
"An employee was removing debris from a mower. When the debris cleared, the mower engaged and amputated part of the employee's left thumb.",0
"An employee was parking a golf cart when her right leg struck another, parked cart. She suffered a laceration to the lower shin area and was hospitalized.",1
"An employee was getting off a forklift truck. The fork caught his boot and pinned his foot against the dock wall, then penetrated his foot through his boot. He suffered fractures and muscle tears to the foot.",1
An employee was cleaning the pinch roller when his right hand got caught between two rolls resulting in a laceration to the hand.,1
"An employee was climbing down from a fixed ladder on a building. One of the steps came apart due to stripped bolts, causing the employee to fall 11 feet to the ground. The employee sustained a fractured arm, fractured wrist, and fractured hip.",1
"An employee slipped and fell while working in steep, rough forest terrain. A sharp stick or other object pierced the employee's clothing and lacerated the employee's abdomen.",1
"An employee noticed that a four-high stack of new wheels were not stacked straight on a conveyor line. The employee grabbed the second wheel from the bottom and began to rotate the wheels to straighten the stack. As he began turning them, the conveyor began feeding forward and the wheels fell, pinching his left hand between the wheels. His index, middle, and ring fingers were broken.",1
An employee was trying to remove a customer's walker from an electric shopping cart. She lost her balance and fell; her hip struck the floor and was broken.,1
An employee was offloading merchandise from the back of the box truck when he fell off the back of the truck and struck his head on the lowered lift gate and suffered a strained back.,1
An employee was walking next to a pallet jack when his ankle was caught between it and some racking. He suffered a possible fracture.,1
"An employee was working from a bucket lift, removing a tree in sections. He lost his balance while pushing on a section and fell. His fall protection caught him and he swung into a tree, suffering an injury that caused head, neck, and leg pain, as well as loss of consciousness while he was at the hospital.",1
"An employee was at the back of a truck loaded with dirt to be removed from a construction site. The dirt collapsed onto the employee, who suffered broken ribs, a collapsed lung, and a broken shoulder.",1
An employee was using an extension ladder to replace a telecommunication line. The employee fell approximately 16 feet to the ground and injured his back and head.,1
"An employee was sweeping the floors when a 1,400-pound bale of cardboard fell on top of her. The employee sustained a broken pelvic bone and a punctured bladder.",1
"An employee was working in a work zone in a double left lane closure. A vehicle backed into the employee, striking the backs of the employee's knees. The employee developed leg swelling and was hospitalized.",1
"An employee was putting a 2-by-4 lumber strip on a pallet. A press die was lowered onto the employee's right thumb, causing a crushing injury and a partial amputation.",1
"On August 25, 2022, an employee and two co-workers were conducting remodeling operations. The injured employee was standing on a ladder to remove drywall when he was struck-by falling drywall, causing him to fall from the ladder to the ground. The employee suffered a broken left arm, wrist, and femur. The employee was hospitalized for surgery.",1
An employee tripped over a tool box next to a step stool in a maintenance room closet. The employee suffered a broken left hip.,1
"An employee was pulling a piece of lumber out of the chains above a rolling machine when his left glove was caught between the roller, pulling his hand into it and resulting in the removal of skin and hospitalization. The machine was not guarded at the time.",1
An employee was drilling a hole in a trailer wall to mount a camera. He stopped midway to replace the drill bit with an extension. The drill then activated as he was tightening the chuck with his left hand. It amputated his left little finger and dislocated the ring and middle fingers.,0
"An employee was setting floor joists on a mezzanine that was being constructed inside a lumber warehouse. While transitioning to an eight-foot step ladder, the employee fell 12 feet, landing on the concrete floor below. They were hospitalized for head trauma, pulled tendons in the left shoulder, a shoulder dislocation, and torn ligaments. Fall protection was not worn at the time.",1
"An employee was stocking vacuums on a shelf when he fell from an 8-foot A-frame ladder to the floor. He suffered head, back, and left leg pain and was hospitalized.",1
"An employee was closing bay doors when they slipped on wet grates and fell to the floor, resulting in a broken left leg.",1
"An employee was repositioning a metal bracket when their right little finger was pinched between the bracket and the blade stud, resulting in an amputation of the fingertip.",0
"An employee got up from their desk; when they began to walk, they tripped on a purse and fell to the floor. The employee was hospitalized with a fractured hip, requiring surgery.",1
"Shortly after 5:00 a.m. on August 25, 2022, an employee was using a vinyl glazing bead punch. The machine activated while his finger was under the punch, and it amputated the tip of his right index finger. The machine was unguarded at the time.",0
"On August 25, 2022, an employee was driving a utility task vehicle (UTV) when it overturned. The employee was ejected and struck a tree, suffering two fractures in the neck.",1
"An employee was trying to unjam a bottle in a blow mold machine. The spreader pin assembly rose into position, catching his left thumb against the mold and breaking the thumb.",1
"An employee was using a 26-inch ladder to install door hardware when he fell to the ground, resulting in a compound fracture to his forearm that required surgery.",1
An employee fell while stocking shelves and suffered a broken hip.,1
"An employee was pushing a metal cart down an aisleway. When the employee entered the main aisle, a forklift struck the cart and pinned the employee against a rack. The employee suffered a broken rib.",1
An employee developed hyponatremia after drinking water during extreme heat.,1
"An employee was removing material from an egg conveyor system when her hand was pinched between two rollers, resulting in a fractured and dislocated right thumb.",1
"Two employees were inspecting a cane saw machine for improper operations. During the inspection process, the machine was turned on and one of the employees sustained amputation of their right index, middle, and ring fingers and a partial amputation of the right little finger.",1
An employee was forming a concrete block. They were holding rebar when the power surged. The employee sustained a partial amputation to their left middle finger.,0
"An employee was inspecting safes inside an abandoned bank when they fell approximately 8 to 10 feet through an opening in the floor. The employee sustained a cranial fracture, fractured rib, and a back vertebra fracture.",1
An employee sustained a broken arm while arm wrestling with another employee.,1
"An employee was descending a wooden power pole. He slipped and fell about 4 feet; his right gaff caught the pole and stopped him suddenly, causing his right knee to be dislocated.",1
An employee was moving inventory when he was pinned between his forklift and a rack. He suffered a broken rib and a punctured lung.,1
"An employee was on a crossbeam when it gave out. He fell about 16 feet, landing on his feet and suffering a dislocation and fracture to the left ankle, as well as a toe injury on his left foot.",1
A casino security employee was responding to a report of an uncooperative guest entering through an unauthorized door. The employee was injured in a physical struggle with the guest; the employee fell to the floor and was hospitalized with a fractured knee and torn ligaments.,1
An employee was using a chop saw when it lacerated his face.,1
"An employee was helping load skids of material and prepare them to be moved into a building. A load became unstable. The employee was between the skids, trying to correct the problem, when a safety wire on one of the skids broke. The load fell and broke the employee's lower left leg.",1
"On August 25, 2022, an employee was removing an animal hide from a carcass using a side puller machine. The side puller caused an amputation of the employee's right index fingertip.",0
"A temporary employee was setting up material to be cut on a panel beam saw when the clamping mechanism came down on his right hand, causing the blade to cut his fingers. The employee sustained amputations to his right index finger, middle finger, and ring fingertip.",0
An employee was being trained to operate a machine. He was running copper tubing into the machine when the crimper was activated and his left thumb became caught in the crimper resulting in partial amputation of the thumb tip.,0
"An employee was talking to a coworker when they fell to the ground, resulting in two broken wrists.",1
"The employee was operating a rebar threading machine when its vise malfunctioned. The rebar began to spin, caught the employee's glove, and lacerated and broke his thumb. Surgery was required.",1
An employee was installing a blind flange onto a pump fluid end. The employee was pushing the flange into place when their left index finger was caught between the fluid end and the blind flange of the counterbore of the steel pump. The fingertip was amputated.,0
"An employee was performing a heart stick/blood draw on an animal before euthanasia, using an 18 gauge needle with syringe. The infected needle came out of the animal and stuck the employee on his left thumb.",1
"On August 26, 2022, an employee was positioning a dolly under a trailer when the tongue of the dolly popped up and struck the employee in the torso. The employee sustained injuries to his ribs, sternum, and left wrist.",1
"An employee was in a scissor lift, performing electrical demolition in a ceiling. The employee contacted a live wire and was shocked. He was hospitalized.",1
An employee became ill after exposure to carbon monoxide that was coming from a malfunctioning boiler. The employee was hospitalized.,1
"On August 26, 2022, an employee of System Remodeling, Inc., was on a bench, applying corner bead drywall around the border of a window at the third-floor level. He fell three feet through a door opening and broke his left foot.",1
"A forklift ran over an employee's right foot, fracturing it. The employee was hospitalized.",1
"An employee was pushing a hand trolley of boxes to unload. A 50-pound box fell from the top of the hand trolley onto the employee's right ankle and foot. The employee suffered an injury to the ankle, as well as an amputation to the middle toe.",1
"An employee was operating a forklift when their foot was caught between a storage rack and the forklift, resulting in a broken foot.",1
"An employee was taking breasts off carcasses and dropping them onto a belt that moved them to another area. The employee's left hand was caught between a breastbone and an automated deboning machine, and the little finger was broken.",1
"An employee was winching a bucket truck out of mud. The winch gave way and the truck struck the employee's right arm, breaking it.",1
"An employee was working with an auto press. The press crushed the employee's left hand, and the middle finger was amputated. The employee was hospitalized.",1
"An employee was using a screwdriver when it slipped, injuring his right eye.",1
An employee was lifting a resident from a wheelchair to a bed when she felt a pop and tear in her back. The employee was later hospitalized; she sustained herniated discs from the incident.,1
"An employee was clearing a clogged sugar chute, containing rare earth magnets inset into an aluminum bar to catch any metal in the sugar. The employee loosened the middle of three magnets and it was attracted to the outside magnet, crushing the tip of his right middle finger. The fingertip was amputated.",0
"An employee was removing concrete forms from a current pour when a form fell from the wall. An intact pin hooked the employee's safety vest and pulled them from the scaffold to the ground, resulting in a bruised chest (lungs).",1
"An employee was using a table saw to cut strips of plywood when the tip of his thumb contacted the saw blade, resulting in an amputation.",0
"An employee was operating a powered industrial vehicle (PIV) when a piece of steel fell off the forks, bounced off the ground, and struck him. The employee's forearm was broken in three places, and required surgery.",1
An employee slipped on water in a bathroom. The employee's head struck the counter and was injured.,1
An employee was punched in the face by another employee and suffered a broken bone.,1
"After loading a 53-foot drop-deck flatbed trailer with pallets and strapping them down, an employee climbed onto the flatbed, then lost his balance and fell off. He suffered a dislocated ankle and facial fractures and was hospitalized.",1
"An employee was placing cribbing under steel plates when the magnet separated, causing the 1,900-pound steel plate to crush the employee's finger. The employee's finger was amputated.",1
"An employee was opening a new spool of strand from a wooden reel. When he removed the shipping band, the strand struck him in the right eye.",1
"An employee was removing U-bolts from a trailer suspension's leaf spring/axle assembly. Once the final nut was removed from the inside U-bolt, the leaf springs fell and pinched the employee's left arm against the ground. The employee's ulna was broken.",1
"An employee was setting up a four-foot part in a lathe. The part had a square shaft with two-inch studs protruding from it. As the employee was adjusting the steady rest bolts, their shirt sleeve became caught on the rotating part of the lathe, resulting in a soft tissue injury to the upper left arm that required surgery.",1
"An employee was driving a stand-up forklift. During a turn, her left arm was caught against a storage rack and broken. She was hospitalized.",1
"On August 26, 2022, an employee tripped while walking down the stairs of a patient's house. She broke her left tibia and fibula and was hospitalized and required surgery.",1
"An employee was waiting for lumber to come down a grain chain. A piece of a board flew out of a trim saw and hit his forehead. He suffered a broken sinus bone, a brain contusion, and a brain bleed.",1
"An employee tripped over a trash can and fell to the floor, breaking her right ankle.",1
An employee was loading 98% sulfuric acid from a tank to a truck. The acid line broke; the employee was sprayed and suffered chemical burns to the upper right side of the body.,1
"The employee was working off a 12-foot step ladder cutting an opening in a sheet rock wall with a reciprocating saw. The employee lost his balance while performing the work and fell from the ladder to the floor below, resulting in neck and leg contusions.",1
An employee was exiting an elevator when she slipped on a wet floor and suffered a torn knee ligament.,1
"An employee was standing on a 6-foot A-frame ladder, checking tire pressures on drive wheels. The employee fell off the ladder to the concrete floor, suffering broken ribs and a broken hip.",1
An employee was moving a meat saw to clean it. The blade lacerated his left hand.,1
An employee suffered a herniated disk while reaching up to grab product in a cooler.,1
"A temporary employee developed cramps while working at a landfill. He was hospitalized, suffering from dehydration.",1
An employee was digging a 2-foot ditch with a shovel for drainage purposes at a tomato farm when they fainted due to heat exhaustion.,1
"A pack of glass fell over, catching an employee's right leg against a steel container and breaking the knee.",1
"An employee tripped on a loose piece of strapping and fell to the floor, suffering a broken hip. The employee was hospitalized.",1
An employee was adding air to a forklift tire. The tire's retaining ring blew off and struck the employee's head. The employee was hospitalized.,1
"An employee was cleaning the rollers on a masa sheeter machine. His right hand was pulled between the rollers, causing fractures to the hand, fingers, and wrist.",1
"On August 27, 2022, an employee was climbing down from a tractor trailer when he fell, landing on the asphalt ground and suffering a fracture to the hip socket.",1
"An employee was operating a roller coaster. One of its cars struck his leg, knocking him to the ground about 6 1/2 feet below. He suffered a broken leg, a broken arm, and a head laceration and was hospitalized.",1
"An employee was retrieving equipment from the ground when an 8x18 piece of plywood containing nails fell from 11 feet, striking the employee in the back and resulting in a fractured back and two puncture wounds.",1
"An employee was pulling a pushcart backward into a walk-in cooler. She tripped and fell to the floor, suffering a hip fracture.",1
An employee lost her balance and fell while organizing a fitting room rack. She suffered a broken left hip.,1
"An employee and crew were engaged in fire control operations. The employee was operating a chainsaw to cut brush along an old logging road to be used as a fire control line. As the employee cut brush along the edge of a cutbank, they fell and slid approximately 10 feet down the cutbank. As they fell, the employee's right forearm contacted the chainsaw, resulting in a 3-inch in laceration to the back of the forearm on the anterior side of the wrist. The laceration severed one tendon and partially severed another, resulting in hospitalization and surgery.",1
A patient became violent and chased an employee up stairs. The employee developed shortness of breath and was hospitalized.,1
Employees were making emergency repairs to the girder of a bridge that was struck by a tractor-trailer. The injured employee was waiting for grinding to be completed so he could stick-weld. He was standing next to a hanging torch when a spark from the grinding caused leaking propane to ignite. The employee sustained a flash burn to his right ankle and required hospitalization.,1
An employee fell to the floor while clocking in and suffered a broken hip.,1
"A postal employee was delivering a mail relay when he became dehydrated and developed cramps in his legs, arms, and chest.",1
"An employee was moving a pack on a shear table when they felt a sharp pain in their abdominal area, resulting in a hernia that required hospitalization.",1
"An employee was standing on a roller to adjust a core on a paper machine when their foot was caught between two rollers, resulting in an injury to the right foot and an amputation of the right little toe.",1
An employee was filling a chlorinator with chlorine tabs. Chlorine erupted from the chlorinator; the employee inhaled it and was hospitalized.,1
An employee was assisting with a car fire and became ill. The employee was hospitalized with a cardiac issue.,1
"An employee was installing 12-by-12-foot aluminum hydraulic shoring in a bore pit. The employee was holding onto the shore pump holes when the shoring shifted downward, pulling the employee off balance and causing him to fall into the bore pit. The employee suffered five fractured ribs.",1
A homeless shelter client attacked an employee with two machetes after being asked to leave. The attack caused amputations to all four of the employee's limbs. The employee was hospitalized and their limbs were reattached.,1
"An employee was using a table saw when it injured his little finger, causing a partial amputation.",0
An employee was testing an explosive device when she was struck by shrapnel in the stomach.,1
An employee suffered a torn aorta while loading two logs into the back of a vehicle.,1
An employee was siphoning water from a tank and ingested chemicals that were in the siphon hose. He was hospitalized.,1
An employee slipped on spilled water and suffered a broken femur.,1
"Employees were installing a 1,000-pound transformer when it fell approximately 6 feet from a mounting stand that was lifted by a forklift. It struck an employee and a machine on the way down, coming to rest with its top on the machine and its bottom on the floor. The employee suffered a broken right arm, a broken tibia and fibula, and a head laceration.",1
"An employee was walking toward a building entrance when a group of cats approached her. She jumped back and fell to the ground, suffering a broken hip.",1
"An employee was loading and unloading materials from a container. His finger was caught between the container and a metal strap, and the fingertip was amputated.",1
"An employee was on a roof while holding a bucket of materials when he fell through a skylight to the floor below, resulting in a broken pelvis that required hospitalization and surgery.",1
An employee was using a handheld pneumatic assembly tool to secure bolts on the frame of a trailer. His left index fingertip was caught between the trailer frame and the tool attachment torque bar. The fingertip was partially amputated.,0
"An employee was removing a dozer pump and motor. As the employee was removing the bolts, the employee's hip contacted the drain line, which broke and released hydrofluoric acid. The acid burned the employee's right calf where the chemical suit had ridden up.",1
"An employee fell while climbing down a ladder, landing on the floor and hitting their head. The employee sustained a brain bleed.",1
"An employee was moving a utility pole that was propped up on a rack. When the employee grabbed the cutout bracket, the pole fell off the rack to the ground. His right middle finger was crushed between the cutout bracket and the cutout, and was amputated.",0
"An employee was rigging depleted gas bottles to be removed from a metal dumpster. A forklift's forks came down to retrieve the bottles. They caught his right middle finger against the rim of the dumpster, causing the amputation of the fingertip.",1
An employee was feeding a wire through a recoiler machine when his right glove was caught in the machine and his right index finger was amputated.,1
"An employee became dizzy while sorting packages on a conveyor line. The employee fell, striking his head on the concrete floor.",1
"A border agent trainee was tracking people through a ranch. He became overheated, developed cramps, and was hospitalized, suffering from heat-related illness and dehydration.",1
"An employee was securing a chain to a bundle of rebar. An excavator bucket struck the employee, breaking the employee's pelvis and sacral bone.",1
"An employee became sick after getting home from work. He was hospitalized, suffering from heat-related dehydration.",1
"Employees were attaching a new liquid valve to an ammonia nurse tank. The wrench slipped and one employee fell off the side of a truck bed, landing on the ground and suffering a head laceration and spinal cord swelling.",1
A forklift was backing out of an aisle when it pinned an employee against a support pole. The employee suffered a broken pelvis and internal organ damage.,1
An employee was standing near an A-frame as a forklift passed. The forklift struck quartz slabs that were on the A-frame causing them to fall over and crush the employee's arm between the slabs and the forklift.,1
An employee was wiring light fixtures on a 277-volt circuit when the circuit was re-energized shocking the employee. The employee suffered burns on their right index and ring fingers and was hospitalized. The lighting system was not locked out/tagged out at the time of the incident.,1
An employee was changing light fixtures when he was shocked by the attached wires.,1
"An employee was leaving work for the day when they slipped on chicken grease near a hot food bar and fell, resulting in a broken left femur.",1
An employee was helping put together a valve on a sewer pipe. The employee became faint and began to suffer cramping caused by heat exhaustion. The employee was hospitalized.,1
"An employee fell while walking through a door, landing on the floor on her face and suffering injuries to the face, mouth, and teeth.",1
"An employee collapsed while walking on his mail route. He was hospitalized, suffering from heat exhaustion.",1
"After conducting vacuum truck waste recovery outside in protective gear, an employee developed heat stress, suffering from muscle cramps in his arms, legs, and hands.",1
"On August 30, 2022, a forklift was raising a pallet stacked with totes when the load shifted and fell onto a nearby employee. She was knocked to the ground and suffered a contusion, a laceration, swelling, and bruising to the top of her right hand. The employee was hospitalized.",1
"An employee was using a hydraulic chipper to clean a press when the conveyor lowered and the employee's leg was caught. The hot aluminum billet made contact with the employee's leg, resulting in a laceration and burn.",1
"An employee was loading material in the back of a box truck. He slipped on wet muddy ground and his face struck a curb. He suffered three facial fractures, as well as a hairline fracture to the hand.",1
"An employee was releasing a chain to open the rear flap of a dump truck when three of their fingers got caught between the chain and the truck, resulting in crush injuries.",1
"An employee was driving an ATV when it entered high vegetation that was covering a ditch. The ATV rolled over onto the employee, resulting in an injured leg and hand. They were hospitalized.",1
An employee was cleaning when their finger was amputated in a hole on the auger.,1
"An employee was unloading a pallet out of the back of a truck. The employee fell from the back of the truck to the concrete ground, suffering injuries to the head and neck.",1
"An employee was operating a capstan during a mooring operation. The employee was caught in the messenger line on the capstan and sustained injuries to the torso and arms, including a possible broken arm and/or ribs.",1
"An employee was pulling packages from a van line and placing them on staging slides located just off the platform of the van line. While sliding a package from the edge of the belt through the unload device groove, the package cut their left little finger, resulting in a fingertip amputation.",0
"On August 30, 2022, an employee was clearing a jam on a roller conveyor line. The employee's right hand was pulled into a powered roller, which partially amputated the little fingertip. The employee was hospitalized.",1
"An employee stood up, slipped on a wet floor, and fell, suffering an injury to the left ankle.",1
An employee slipped on a wet floor and suffered a broken left ankle.,1
An employee was struck by a forklift and suffered a lower body laceration and crush injury.,1
An employee was bitten by a venomous spider at a construction site and was hospitalized.,1
"An employee was trying to unjam a bag on a conveyor. The conveyor mechanism caught the employee's left ring finger, causing a degloving injury and fingertip amputation.",0
"On August 30, 2022, an employee slipped and fell while climbing down from a melter. The employee landed on the floor, suffered a back injury, and was hospitalized.",1
"At about 8:55 p.m. on August 30, 2022, an employee was repairing a conveyor when his right hand was caught in its undercarriage. He suffered lacerations to the hand and fingers and was hospitalized.",1
"An employee was removing a pump assembly from a machine. The employee's finger was caught between the pump and the machine, and the employee suffered a fingertip amputation.",0
An employee was cutting a piece of plywood using a table saw. The guard of the saw came up and his right thumb contacted the blade. It was amputated above the second knuckle.,0
"An employee opened a door and fell onto a tile floor, breaking her left kneecap.",1
"An employee was about to clear a jam inside a can body maker. As he stepped up to open the body maker, with one hand on a control panel and the other on the body maker door, he suffered an electrical shock and fell. He was hospitalized, suffering from electrical shock and a severe knee sprain resulting from the fall.",1
"On August 3, 2022, an employee was working on a flat steel roller. The flat steel was feeding into the roller unevenly; as the employee was adjusting it, they lost their balance. The steel began to feed into the roller, and a tab on it amputated the employee's right index fingertip.",0
An employee fell and struck their head on a piece of equipment. The employee suffered a head injury and was hospitalized.,1
An employee was troubleshooting a machine. A pallet of stacked slip sheet material fell and broke the employee's right leg.,1
"On August 30, 2022, an employee was in an elevated manlift working on a power line when he suffered an electrical shock, resulting in burn injuries to his left leg and his right upper torso underneath the side of his right arm.",1
"An employee was working on a stacker machine in a saw room. His gloved hand was caught in the stacker chain and sprocket, causing an amputation injury to his fingers.",0
"An employee had climbed an 8-foot A-frame ladder to reach a ceiling to replace a section of copper pipe. He placed plywood above the t-grid ceiling framing, and was above the ceiling when he tripped on a junction box, and fell approximately 9 feet, landing on the concrete floor. The employee suffered fractures to the tibia, fibula, and ankle, and a dislocated left foot.",1
"An employee was placing a piece of glass in a window. The glass got stuck, and as the employee was pushing on it his right hand broke though it. He suffered a laceration to the top of his right hand.",1
An employee tripped over a box and fell to the floor while walking to the printer. The employee was hospitalized.,1
"An employee was on top of a dry kiln, repairing a baffle water line. The baffle cable broke, causing the baffle to shift. The employee lost his balance and fell to the ground 15 feet below, suffering broken vertebrae in the neck and back.",1
"An employee was using a sledgehammer to drive a barrel pin out of a girder splice. A piece of shrapnel broke off the pin and lacerated the employee's right inner thigh, just above the knee.",1
"An employee tripped over an unplugged phone cord, fell to the floor, and suffered a broken hip.",1
"An employee was unloading a newspaper delivery truck. As he backed out of the truck onto a dock, with the papers on a pallet carried by an electric pallet jack, the truck rolled away from the dock and he fell to the ground. The pallet jack and the pallet with papers fell onto him. He suffered a broken left tibia and a left ankle injury.",1
"A metal delivery truck cart, carrying boxes, rolled down a loading ramp. It struck and broke an employee's leg.",1
"On August 31, 2022, an employee was climbing racking when he fell, suffering a broken leg.",1
"An employee fell while exiting a vehicle that was on a lift. His left leg was caught between the lift and its hoist arm. He suffered a very severe bruise, with a buildup of pressure and a possible blood clot.",1
"On August 31, 2022, an employee was dipping a cup into a mixer to take a sample. A mixer blade struck the cup, and a hook on the cup's handle hit the employee's right ring finger. The finger was partially amputated.",0
An employee was moving a scissor lift when it came down on his left ankle.,1
"An employee was walking by the side of a truck trailer. A wheel loader pushed a 900-pound bale of cardboard over the side of the trailer and the bale struck the employee, who suffered back injuries.",1
"An employee had just finished work. The employee began shaking, and their pupils dilated. The employee was hospitalized, suffering from heat exhaustion.",1
"An employee was closing the lid on a marination tank. The lid closed on her left index finger, partially amputating it.",0
"An employee filled a drinking vessel with water, then took a drink. The vessel was filled with hot water rather than cold, and the employee suffered burns to the esophagus. The employee was hospitalized.",1
"An employee was trying to identify the location of a blockage in a pneumatic line. Two pipes in the line came apart, expelling batch mix onto the employee. The employee suffered abrasions and burns to the head, neck, and back.",1
"An employee was walking between registers when they slipped and fell, suffering a leg injury.",1
"An employee was in a trench when its wall partially collapsed. The dirt broke the employee's ribs, and the employee was hospitalized.",1
"An employee was entering a concrete pit by stepping down onto a 55-gallon drum in the pit. He slipped and fell, and his lower abdomen struck the edge of the drum; his upper body then fell toward the other side of the drum. He suffered internal crushing injuries to the abdomen, as well as a laceration to the lower lip.",1
An employee was loading cattle into a semi. The livestock became tangled in a rope. The employee grabbed the rope and the livestock pulled it; the employee suffered a fingertip amputation.,0
An employee was using a knife to cut a zip tie from a cable. The knife cut his upper right leg and severed an artery. He was hospitalized and required surgery.,1
"An employee was climbing an indoor ladder leading to a roof hatch. The employee fell from the ladder to the floor about 11 feet below, suffering broken ankles and shins.",1
An employee sustained a hernia while pulling a pallet off a rack.,1
"An employee suffered burns to the left hand, left arm, and face while working on a flare.",1
"An employee was helping to dislodge a bucket from an excavator by pushing on the locking mechanism with a crowbar. He suffered a punctured lung, a cheek abrasion, and a bruised shoulder, caused by the bucket.",1
"An employee was walking on top of a double-T form bed while carrying a piece of rebar. He stepped on a strip of foam that had been placed over a stem channel, and his leg went into the channel causing him to fall onto the steel bed. The rebar struck him. It lacerated the left side of his chin and broke his safety glasses, causing pieces of the glasses to enter his left eye.",1
"An employee entered a resident's room when their call light indicated that they needed assistance. The employee walked toward the resident's bathroom when she noticed a wheelchair, bedside table, and walker in her pathway. As she began to move the items, her foot became caught on the walker, causing the employee to trip and fall. She sustained a hip fracture and was hospitalized.",1
"An employee had been dumping trash into a compactor. While returning to the building, he tripped over a bent piece of plate metal that serves as decking for a platform. He fell to the concrete floor and sustained fractures to the left wrist and right knee, and also sustained a cut above the left eye.",1
"On August 31, 2022, an employee was pushing a piece of wood through a wood chipper. His left thumb was caught and crushed between the wood and the chipper; he suffered a partial amputation to the thumb.",1
"An employee was setting a pipe in a trench about 3 feet deep. When he stood up, his head hit the wall of the trench and he suffered a neck injury.",1
An employee was closing a safe door. The door caught the employee's left thumb and amputated the tip.,1
"An employee became dizzy, fell backward, and struck the back of his head on the floor. He suffered a laceration to the back of the head and a possible brain aneurysm. He was hospitalized.",1
"On August 31, 2022, an employee was stabilizing a ring on a roller machine. The rollers caught the employee's right hand, causing an amputation to the little finger.",0
"An employee was forming a three-bend part on a brake press. The employee was guiding the part when it folded upward and pinched their fingers against the face of the die. The employee suffered fractures and lacerations to the right index, middle, ring, and little fingers.",1
"At about 11:30 a.m. on August 31, 2022, an employee was using a hoist to install a jack stand on the hitch of a grain cart. His finger was caught in a lug hole, and shearing action amputated the fingertip.",1
An employee was cleaning a cement mixer when their hand was caught by the blades. The employee suffered a compound fracture to the hand and a degloving injury to the top portion of the hand. The employee was hospitalized.,1
"An employee was cutting a piece of wood on a table saw. The wood kicked back and the sawblade lacerated the employee's left index and middle fingers, resulting in partial amputation of the left index finger.",0
"At about 12:15 p.m. on August 31, 2022, an employee was shooting at a gun range when his handgun fired into his right upper leg, entering above the knee and exiting at the calf.",1
"An employee was dismounting a forklift when his foot got caught. He fell to the concrete floor, suffering a broke nose and a laceration to the forehead.",1
"An employee was backing up a loaded concrete truck. As the employee was moving the truck out of the way of other vehicles, the load shifted and the truck rolled over. The employee sustained rib fractures and a ruptured spleen.",1
"While walking around a forklift, an employee tripped on its forks and fell on the floor, sustaining a dislocated shoulder.",1
"An employee was lowering his tools to the ground while on top of a roof at a job site. The tools were on a pallet with a strap attached to it. When the employee tossed the pallet off the roof, the strap caught his foot and leg, pulling him off the roof to the ground below. The employee suffered broken bones.",1
"An employee was walking by a wooden pallet. A nail sticking out of the pallet caught the employee's shoe and the employee fell to the floor, suffering a broken left hip.",1
"On September 1, 2022, at approximately 2:10 p.m., an employee was testing the re-tooling on a metal CNC machine. As the employee grabbed the tool, it began to spin cutting flesh off the bottom portion of left ring finger and resulting in an avulsion that required hospitalization.",1
"On September 1, 2022, an employee was helping load cargo into a van. The employee's finger was pinched between a pallet and a 2-by-4, and the fingertip was amputated.",0
"An employee was working on a brake press when it struck his left hand, resulting in crushed index and ring fingers.",1
"While placing cable at a private residence, an employee stepped off a covered retaining wall, fell onto the ground about four feet below, and suffered broken ribs and possible punctured lungs.",1
"On September 1, 2022, an employee was conducting a test run for bending a steel plate when the bending machine got caught on a roller bed pipe, causing the roller bed base plate to come loose and fall onto the employee's left foot. The employee suffered broken left toes.",1
"An employee opened a hotdog packaging machine to clear a film jam in the machine. The employee restarted the machine after clearing the jam, but the film began to jam again. The employee attempted to clear the jam again when their left index and middle fingers contacted the shear between the sealing bucket and the sealing head, resulting in partial amputations of the fingers to the bottom of the nail beds.",0
An employee suffered an amputated index finger while operating a slicer.,1
"On September 1, 2022, an employee was standing in a wooden box that was sitting on top of a pallet. The employee was attempting to slide a motor that was in a cardboard box over approximately 6-8 inches to a metal motor build table. The hole in the side of the cardboard box that is used as a handle ripped when the employee attempted to slide the box, causing the employee to loose their footing and fall on their left arm. The employee suffered an arm fracture that required hospitalization.",1
"An employee was setting up a pipe on a jack stand. The reel on an electrical wire came down and caught the employee's finger, causing the amputation of the fingertip.",0
"On September 1, 2022, at approximately 7:35 a.m., an employee was standing on the back of an asphalt paver when the asphalt roller rolled forward, causing their right leg to be caught between the paver and the roller. The employee was hospitalized with a fractured right leg.",1
"An employee was removing a brake beam wear liner on a railcar using a hydraulic C-clamp. The liner popped out of the clamp and impacted the employee's right little finger, resulting in a fingertip amputation.",0
"On September 1, 2022, an employee was operating a conveyor system when a tote containing product spilled. The employee attempted to capture the product when her right hand contacted the roller system, resulting in abrasions and contusions to the back of the hand and hospitalization.",1
"An employee was standing on a ladder, using a cordless trimmer to trim trees. While the employee was trying to regain his balance, the trimmer blade struck his left middle finger, resulting in a laceration and fracture.",1
"An employee was opening packaging on a new water hose for a pressure washer. The employee was using a utility knife to cut zip ties off the packaging when the knife slipped off the zip ties and contacted the employee's left wrist, resulting in a laceration to the wrist that cut an artery.",1
"An employee was moving three tank railcars when he fell and the wheel of a tank car struck his right leg, resulting in an amputation of the leg.",1
"The injured employee was trying to stop a piece of wood, which had been cut by another worker's circular saw, from falling to the ground. The saw amputated the injured employee's left index finger.",0
"An employee was standing next to a forklift when the forklift ran over his foot, resulting in two toe amputations.",1
An employee was on a lift platform approximately 10-15 feet above the ground. The employee reached into an electrical panel to switch off a breaker when he experienced an electrical shock and collapsed. The employee was hospitalized.,1
A machine operator and a mechanic were troubleshooting the loading mechanism for a paint booth when the loader arm was activated while carrying an 8-inch pipe. Both employees were caught between the pipe and the wall/gate of the paint booth resulting in crushing injuries. The operator was taken to the hospital and released. The mechanic was hospitalized with fractures to the pelvis and spine.,1
"An employee was speaking with a co-worker while standing on a dock when they passed out and fell to the same level due to heat-related dehydration, hitting their face and sustaining a fractured and dislocated jaw.",1
"An employee was using a hydraulic cylinder with a threaded pulling rod to remove a pin from the frame of a loader. The rod broke and was ejected from the loader frame. It struck the employee's lower right leg just above the ankle, breaking the tibia.",1
"An employee was cleaning the floor around a conveyance area when their right index finger was caught between a partially broken conveyor link and the transition plate, resulting in a partial amputation.",0
"An employee was walking down the hall when a co-worker spoke to her from behind. The employee turned her head to the left to acknowledge the co-worker when her toe caught on the floor. She lost her balance and took a few steps forward, trying to catch herself. The employee fell into the wall and hit her head, resulting in a headache and subarachnoid hematoma.",1
"An employee was assisting with unloading boxes from a truck. The employee put a box on the conveyor when she lost her balance and her little finger got caught in the conveyor as she was trying to balance herself, resulting in an amputation between the second and third joint.",0
"An employee tripped while walking out of a room, fell to the floor, and suffered a broken left hip.",1
"An employee was cleaning adhesive off a roller on a label machine. The roller pulled in the rag he was using, then his right hand. The last joint of the middle finger was amputated.",0
"An employee was walking toward the door during a meeting when she tripped over a computer cord and fell to the floor, resulting in a humeral shaft fracture.",1
An employee was cleaning up spilled cleaning chemical. The chemical splashed onto her pants and burned both of her legs. She was hospitalized.,1
"An employee was loading an empty cage onto a lift gate. The cage began to collapse on itself and caught the employee's left hand in a pinch point, causing multiple fractures to the index finger.",1
"An employee was changing a drill bit. The drill activated, caught the employee's glove, and pulled in the employee's hand, amputating the little fingertip.",1
An employee was placing dunnage under a concrete barrier. The barrier tipped over and broke his right foot.,1
"An employee was hanging materials on a bulletin board while standing on a chair. She fell off the chair and struck her head on the floor, suffering a scalp laceration and a concussion. She was hospitalized.",1
"An employee was distributing shingles on a roof that was under construction. The roof collapsed from under him and he fell to the concrete floor 15 feet below. He suffered fractures to the left upper femur and the left radius, as well as lacerations to the chin and left eyebrow.",1
"An employee fell through a new construction roof to the concrete floor, suffering a broken left femur and left radius, a chin laceration, and a left eyebrow laceration.",1
"An employee tripped and fell over a piece of wood, suffering a broken hip.",1
An employee was working in a greenhouse when they started to show symptoms of heat stress. The employee was hospitalized.,1
"An employee was returning to her vehicle just off a road. She fell while stepping off the roadway, landing on the ground an suffering a broken left arm and a shattered left knee.",1
"On September 2, 2022, an employee was working near a drum dryer when combustible dust ignited within it. There was a flash fire, and the employee suffered first-degree burns on the face, neck, and arms.",1
"An employee was closing a valve on one hopper and opening the valve on another. While the employee was stepping over a product feed hose, her foot was caught. She fell to the concrete floor, suffering a fracture and dislocation of the right elbow.",1
"An employee was at the greeter desk outside of the emergency department when a patient was being discharged. The patient punched the employee on the left side of his head. A few seconds later as the employee was walking to the triage area, he fell to the side and his head struck a wall. The employee was hospitalized.",1
"An employee was crossing the road between an onsite break room and a locker room. A forklift carrying a roll of stranded cable struck the employee. The employee suffered fractures to the left leg, pelvis, right arm, and right hand,",1
"An employee was on a welding table, cleaning the welding area of slag and debris. The employee fell from the table onto a trolley system 41 inches below, suffered two broken ribs and a lacerated liver.",1
An employee was working to repair a spray gun when the trigger was activated and the spray gun lacerated the palm of his right hand. He was hospitalized.,1
"An employee was working on a rig floor, removing a bowl and slips from a wellhead. The slips moved and crushed his left hand.",1
"An employee was blowing bearings from underneath a ball bearing assembly machine using an air hose. The air hose nozzle was pulled under the machine table, which rose and pinched the employee's right hand against a structural support. The employee suffered a partial amputation to the right thumb.",0
"An employee was leaving a building when she tripped and fell down a set of four or five stairs, striking her head on the concrete sidewalk below. She suffered a concussion and was hospitalized.",1
"An employee tripped on a bent piece of a metal platform and fell, suffering a broken wrist and an injury that required stitches.",1
"An employee was trying to remove a jam from a packaging machine. Blades in the machine amputated his left hand, and he was hospitalized.",1
An employee was caught in a hydraulic clamp while servicing equipment. The employee suffered a crushing injury.,1
"An employee fell while closing a gate, breaking his hip in three places. He was hospitalized.",1
An employee was struck by a powered industrial truck's clamp structure while scanning appliances. The employee suffered a contusion to the ankle (from the truck) and a head contusion (from falling to the floor) and was hospitalized.,1
"An employee was working on top of a ceiling flat on a TV production set, replacing wood rigging pieces. The ceiling flat collapsed and he fell 9 feet to the set floor, suffering broken ribs and a collapsed lung. He was hospitalized.",1
"On September 2, 2022, an employee was trying to apprehend a shoplifter in a jewelry department when the shoplifter stabbed him in the upper right torso and right leg with a knife. He also suffered a puncture wound to his right hand. He was hospitalized.",1
"An employee was removing boxes from an automated carton erection machine. The employee's right thumb was caught in the chain and gear of the machine, which amputated the thumb tip.",0
"An employee had swapped out the punch and die on an ironworker and was aligning the punch to the die. As the employee was bump cycling the machine, the edge of the punch struck the edge of the die and the punch broke. A piece of steel from the punch struck and punctured the employee's right eye.",1
"A truck was backing up a container in a yard. The back of the container struck an employee, resulting in rib fractures and collapsed lungs.",1
"An employee was walking to a bus stop on a work site. The employee tripped in a hole in the sidewalk and fell to the concrete, suffering a broken hip.",1
"On September 3, 2022, an employee was moving a transfer hose for pesticide. The employee came into contact with pesticide residue and was hospitalized, suffering from chemical poisoning.",1
"An employee was clearing jammed noodles from a noodle machine. The employee's left hand was lacerated by the rotating blade that cuts the noodles, causing amputation of all four fingers.",1
An employee had been delivering mail and was overcome by heat. The employee was hospitalized for heat exhaustion.,1
"An employee fell in a parking lot while trying to stop a shoplifter. The shoplifter then ran over him with a vehicle, breaking his leg.",1
"An employee got off a forklift and was struck by another forklift, which pinned her right ankle against the tire of her own forklift. The ankle was broken.",1
"An employee was transferring material from a larger bin to a smaller bin when a forklift ran over her leg, resulting in a broken leg and ankle.",1
A finger on an employee's right hand was crushed in a freezer door. The finger was amputated above the first joint.,0
An employee became dehydrated while delivering mail.,1
"An employee was washing down a piece of equipment with water. He slipped on water on the floor and fell, hitting his head on the wall and the floor. He suffered a skull fracture and intracranial bleeding.",1
"An employee was checking the alignment of a core box. The box closed on the employee's right hand, breaking the ring finger and a metacarpal.",1
"An employee was loading a pyrotechnic concussion device when it discharged. The employee suffered amputations to his ring finger and little finger, as well as a tissue injury to the hand.",0
A smoke jumper had a hard landing and suffered a compression fracture to the back.,1
"An employee entered a room, slipped on a wet floor, and fell. The employee's head struck the floor, causing a skull fracture.",1
"An employee fell, breaking her right hip.",1
"An employee was walking up the stairs at a bromine loading/unloading area. A thermal expansion rupture disc failed in a chlorine dock area, about 70 yards away. The employee inhaled chlorine gas, suffered lung irritation and low blood oxygen, and was hospitalized.",1
"An employee was on a ladder greasing the chains on a conveyor. She slipped and fell from the ladder to the floor, suffering inflamed discs in her back. She was hospitalized.",1
An employee fell during shopping cart retrieval and suffered fractures.,1
"An employee was attempting to stop a client from hitting another client when the client punched her several times, and grabbed her hair and whipped her head back and forth. The employee sustained neck injuries and a heart attack.",1
"An employee was repairing a shop vacuum. While he was putting the cover back on, his right thumb was sucked into the motor and broken.",1
"Two employees were fighting in a parking lot. One of them had a knife, and both were stabbed multiple times. One of them was hospitalized.",1
A tool cabinet door fractured and partially amputated an employee's left ring fingertip.,0
"An employee tripped and fell into another employee, who then also fell and suffered a broken wrist and leg.",1
"An employee was washing down a brick wall. He was removing scaffolding and was about to move down to a lower level when he fell, landing on the ground about 20 feet below and suffering a hip and spine fracture.",1
"An employee was running behind the store in the loading parking lot area, attempting to catch up to a delivery driver who forgot something. The employee tripped near a speed bump and fell, resulting in a fractured right femur.",1
"An employee was pushing boards through a jointer machine, used to cut straight edges on boards. The machine's cutter head amputated one of his fingertips.",0
"An employee was driving sheet metal into an excavation to prevent cave-in. The metal contacted an electrical line, and the employee was shocked and burned.",1
"An employee was performing maintenance on a conveyor. The employee's finger was caught between the conveyor pulley and the belt, and the employee suffered a finger avulsion. The machine was not locked out/tagged out at the time.",1
"A 370-pound piece of aluminum was being lifted with a jib crane and a calibrated suction lifting fixture. The aluminum fell, landing on an employee's left foot about 3 feet below. He was hospitalized; his big toe had been broken, and the other four toes were medically amputated.",1
"An employee was operating a pallet jack when it went out of control and pinned him against a racking system, causing an abrasion and bruising to a knee.",1
"An employee was climbing from a 4-foot aluminum ladder onto a trailer. He slipped and fell to the ground, suffering broken ribs.",1
"An employee was stepping off a lawn mower to clear debris from under it. The mower moved forward and ran over the employee, injuring his left leg. The leg was broken and he was hospitalized.",1
An employee was moving a roll ladder when it tipped back and fell on the employee. The employee suffered a broken lower-back vertebra.,1
"An employee was walking toward a hammer forge machine area. He slipped on the slippery floor and fell onto the forge. The forge's dies caught his right hand and crushed three fingers, amputating them.",0
"A crane's auxiliary line was tangled with its anti-two-block device's weight. An employee pulled on the line to free it; the slack released, and his left little fingertip was caught between the weight and the line. The fingertip was amputated.",0
An employee's right thumb was pulled into the chain and sprocket of a fan on top of a conveyor. The tip of the thumb was amputated.,0
"An employee was assessing pallets of supersacks that had shifted and needed to be removed from a semi-truck. The employee stepped on a nail, tripped, and fell to the floor in the trailer, landing on his hip and suffering a hip injury.",1
"An employee was walking to the break room when they tripped on the edge of a pallet and fell to the floor, fracturing their right femur.",1
An employee was working on a palletizer machine when it jammed. The employee was trying to clear the jam when the machine caught their left middle finger. The fingertip was amputated halfway up the nail.,0
"An employee jumped out of a man basket from about 6 feet above a roof. He went through the plywood decking and fell to the concrete floor below, landing on his wrist and face and suffering a broken wrist, a broken nose, and a concussion.",1
"An employee was climbing down a ladder from an inverted dumpster. The ladder slid backward rapidly and fell over, causing the employee to fall to the ground about 5 feet below. The employee's left wrist was broken.",1
"An employee walked up the stairs and stepped onto the grating of a catwalk. The grating gave way and the employee fell, sustaining a partially collapsed lung and three broken ribs.",1
"An employee was operating a quarter saw. As the employee adjusted a wooden work piece, the incline chain caught the employee's glove. The employee's left hand was pulled into the sprocket and chain, and the ring finger was amputated at the knuckle.",0
"An employee was unloading chemical boxes from the back of a box truck. He tripped and fell from the truck to the ground, landing on his head. The employee sustained a neck injury.",1
An employee developed heat exhaustion while working on a residential reroofing job. He was hospitalized.,1
An employee was dumping trash from a construction trash hopper on a forklift. The employee's left ring finger was caught between the hopper and the forklift's tines. The employee suffered a partial amputation to the finger.,1
"An employee slipped on a wet floor, injuring her knee and hip.",1
An employee fell from a ladder and suffered a broken hip.,1
"An employee was loosening a flange in a hydrogen unit. Residual gas escaped and ignited, causing second-degree burns to the side of the employee's face and elbow.",1
An employee was backing up an electric pallet jack. The employee's toe was crushed between the pallet jack and a pallet. The employee suffered a broken toe and a torn ligament.,1
An employee was transferring phases from an old wood pole to a new steel one. An arc flash burned his chest and his right armpit.,1
"An employee was on a fiberglass ladder, preparing a window area to be painted. A rung on the ladder broke and the employee fell to the ground about 15 feet below, suffering a broken wrist and a broken leg.",1
An employee was throwing dirt into the jaws of a directional boring machine when the jaws closed and crushed their right index and middle fingers.,1
"While installing irrigation pipes, an employee was bitten on his hands by fire ants.",1
"On September 6, 2022, an employee was performing maintenance on a battery changer. As the employee was removing slack from its chain, the machine was activated. The chain and sprocket amputated the tip of the employee's finger.",0
An employee developed heat stress while picking sweet potatoes and lost consciousness. The employee was hospitalized.,1
An employee was moving a safe when his right index fingertip was pinched and amputated between two safes.,0
"An employee was troubleshooting a repair on a carpet extractor. The employee's left middle finger touched the extractor's fan blade, which amputated the fingertip.",0
"A forklift struck a bar under a bay door. The bar fell and struck an employee's head, breaking the employee's skull. The employee was hospitalized.",1
An employee was operating an order picker when another order picker collided with it. The employee was suffered strains and was hospitalized.,1
"An employee had been inspecting ammunition in the heat, wearing flame-retardant coveralls. After leaving for lunch and then returning, he became ill and was hospitalized, suffering from possible heat exhaustion.",1
"An employee was working on a sprocket for a conveyor. An adjacent conveyor was turned on and caught a welder's blanket that had been covering part of it. The blanket wrapped around the employee's left foot and dragged the employee's leg into the conveyor, causing severe injury to the leg and the foot. The employee was hospitalized.",1
"At about 4:30 p.m. on September 7, 2022, an employee fell while walking down a flight of steps outside. She suffered a compound fracture to the femur.",1
An employee was cleaning cow hooves by spraying them with water. The employee came into contact with a nearby foot saw and suffered amputations of the left middle and index fingers. The employee was hospitalized.,1
"An employee was doing a pre-trip inspection of a tractor trailer. The employee fell from a small ladder/step stool to the ground less than 3 feet below, suffering a broken right ankle.",1
"An employee was stocking product from the platform of a powered industrial truck. The employee fell to the concrete floor and sustained a concussion, a burst blood vessel in the left eye, fractures to the left eye, shoulder, elbow, and ribs, and a fractured right foot.",1
An employee was reaching down to pick up a tool when a box knife lacerated his hand.,1
"On September 7, 2022, an employee was mounting a tire using a tire machine. The employee's middle fingertip was pinched in the point of operation and amputated.",0
"An employee was cutting a roll of steel from a slitter machine when their arm became caught in the machine, resulting in compression injuries to their arm and hand that required hospitalization.",1
"An employee put a rubber mold into a demolding machine. While operating the machine, the employee's right thumb was caught between two metal parts and was partially amputated.",1
An employee was feeding metal intro a straightening machine when his glove was caught in the rollers. His right index and middle fingers were degloved.,1
"A large, solid, mounted tired was being loaded into a semi trailer. It fell onto an employee's left leg, possibly breaking a bone in the leg or foot.",1
An employee was helping unload large-diameter steel bar stock from a saw. The stock was about to hit the front of the saw; he unhooked the magnet holding it on the saw to make adjustments. The material fell onto his leg and broke his femur.,1
"An employee was clearing meat from a conveyor. The employee's glove caught a sprocket on the belt drive bar, causing the employee's left hand to be wrapped around the bar. The employee suffered a compound fracture to the forearm near the wrist.",1
"An employee slipped while walking down stairs, fell, and suffered a back injury.",1
"An employee fell about 12 feet from a roofing deck, suffering multiple fractures. The employee was hospitalized.",1
"An employee was preparing to service a truck when a rear suspension airbag exploded. A piece of the airbag struck an employee, causing a chest wall fracture.",1
An employee was engaging a high-voltage interlock when their left middle finger was caught between the interlock and coupler partially amputating the finger just above the first knuckle.,1
An employee was re-holstering a gun when it went off and shot the employee in the thigh.,1
"On September 7, 2022, at approximately 11:34 a.m., a truck driver was untarping a load for delivery when he tripped on a chain and fell from the flatbed to the ground. The employee was hospitalized with a fractured and dislocated elbow.",1
"On September 8, 2022, an employee was pushing a rolling cart containing 20-foot steel angle and pipe. The metal shifted and pinched the employee's left ring finger. The employee's fingertip was amputated.",0
"On September 8, 2022, an employee was working with cinnamic aldehyde and noticed his arms had some irritation after leaving work for the night. After showering, the irritation became more intense and a rash appeared. The employee was hospitalized for a rash on both arms between the elbow and the wrist.",1
"An employee was adjusting the top of a dough molding machine. The employee's left hand slipped into the machine's sheet rollers, which caused fractures and skin removal on the middle, ring, and little fingers.",1
"Employees were washing an asphalt roller with a power washer. The washer's hose became entangled in the rear wheel of the roller, then wrapped around an employee's left leg and pulled it into the wheel. The employee suffered several broken bones in the leg and the ankle.",1
An employee was helping a co-worker when a metal I-beam fell off a forklift and struck an employee's left foot and ankle.,1
An employee was standing on a trailer to load pipes. A 10-inch pipe rolled while being placed. It struck the employee and knocked him off the trailer; another pipe then rolled off the trailer and struck the employee in the chest. The employee suffered a broken collarbone.,1
A UPS employee became dehydrated while delivering packages. The employee was hospitalized.,1
"An employee walked to the rear of a water truck when the truck reversed and the dual passenger-side rear tires struck the employee, resulting in a laceration and crush injury to the right calf and a vertical fracture to the right pelvic bone.",1
"An employee was loading a baler with material when her left arm became caught in the machine, resulting in an amputation to her lower left arm (below the elbow).",0
Employees were working on a road construction project by a bridge. An employee was cleaning debris from the bridge and walking down the bridge slope when he stumbled and fell forward on dirt. He sustained injuries to the neck and left shoulder.,1
"An employee was trying to light a gas burner with a lighter when residual natural gas ignited. The employee suffered burns to the face/neck area, severe burns to the right middle and ring fingers, a burn from the right hand to the right elbow, and a first-degree burn from the left hand to the left elbow.",1
"An employee was working in the grinding department at a brick making plant, where the temperature was in the low 80s. The employee's hands and legs started to cramp due to suspected dehydration; he was hospitalized.",1
"An employee was processing firewood using a hydraulic press. While clearing a jam in the press, the machine cycled and crushed his right hand, resulting in an amputation to the right index finger.",0
"On September 8, 2022, an employee was installing the top rail on a guardrail system. The employee's right index finger was pinched between the guardrail and a post, resulting in a fingertip amputation.",0
An employee was helping to control a steel joist that was being lifted by a telehandler when a sudden movement of the load caused them to slip and the telehandler ran over their leg. The employee was hospitalized with multiple fractures and an amputation.,1
"An employee was digging a hole next to a sidewalk. A car jumped the curb and struck the employee, who suffered multiple injuries.",1
"A group of telecommunication workers were installing fiberoptic underground lines at a manhole. At approximately 10:15 PM, a vehicle struck the back of an illuminated police detail vehicle and continued though the delineated work zone, striking an employee. The employee was hospitalized with severe injuries to his lower extremities, and his left leg was amputated below the knee.",1
"An employee was digging a hole with a shovel when they struck an electric cable and an arc flash occurred, resulting in a burn.",1
"An employee was parking a riding pallet jack at a charging station. After she jumped off the jack, it ran over her right foot and crushed it. She was hospitalized.",1
"Employees were installing a refurbished cargo pump on a tank. One of the employees was on a cherry picker, guiding the pump into place with his right hand as it was lifted by a crane. The pump caught on an obstruction. When the pump was freed, it jumped. The employee's right hand was crushed between the pump flange and a piping flange directly above the pump.",1
"On September 8, 2022, an employee was stocking a display when it fell onto the employee, breaking their left ankle. The employee was hospitalized.",1
"On September 8, 2022, an employee was descending the ladder of a cargo ship when he fell approximately 4 feet to the deck below. The employee was hospitalized with a neck fracture, head laceration, and bruises on his right leg.",1
"An employee was climbing a rail car ladder and fell approximately 10 feet to the ground. The employee landed on their left foot, resulting in a shattered left ankle.",1
An employee's hand was crushed by falling steel bars.,1
"An employee was doing a routine pickup at the bank. During a robbery attempt, the employee was shot and hospitalized with a bullet wound to the hand.",1
"An employee was welding a waler beam. Tack welds on the beam failed and it fell 12 inches, lacerating the employee's left foot and breaking three toes.",1
"An employee was walking up the main stairwell while carrying a 12-volt battery. The employee tripped and broke his fall with his left hand, and the battery landed on his left middle finger, resulting in an amputation.",1
"An employee was using a table saw to rip strips of wood when their finger was cut by the blade, resulting in a fingertip amputation.",0
"On September 9, 2022, at 1:20 a.m., an employee emptied a trailer by lifting it with a hoist. The employee lowered the trailer and went to remove the hook from the connection point on the trailer. As they put their left hand on the hook, the hoist activated, causing their fingers to get crushed between the hook and a metal bar on the trailer. The employee suffered crush injuries to their middle and ring fingers, resulting in surgical amputation down to the first knuckle.",0
"An employee was climbing down out of the bed of a pickup truck. He tripped and fell, hitting the side of his head and shoulder and suffering internal bleeding in the head.",1
"An employee was cutting 10-foot lengths of 3/4-inch PVC pipe using a compound miter saw. The employee's left hand contacted the sawblade, which amputated his index finger and lacerated his thumb, a tendon, and blood vessels.",0
"An employee removed a cap from a hose and 93 percent sulfuric acid splashed in his face, causing chemical burns.",1
"An employee was installing an air conditioning coil. As he was soldering the copper lines, a valve popped off and struck his eye.",1
An employee was using a step stool when a step gave way. He fell off the stool to the floor and suffered a broken ankle.,1
"An employee was repositioning himself in a tree. He fell from the tree to the ground, suffering a broken right wrist.",1
"An employee was trying to clean product from equipment when the equipment lacerated the employee's right middle fingertip, causing an amputation.",0
"An employee was performing store management duties when he fell and his head struck the ground, causing him to sustain a skull fracture and bite his lip.",1
"After cutting pipe with a cold saw, an employee was leaning over the saw to roll the pipe onto a pipe table with his left hand. The pneumatic pipe clamp activated and caught the tip of his left ring finger, resulting in a partial fingertip amputation and the removal of the nail.",0
"An employee was installing equipment on a locomotive's electrical panel when he experienced a shock, resulting in burns to his left shoulder and right underarm.",1
"An employee was putting away product into warehouse racking when they fell from the racking, resulting in injuries that required hospitalization.",1
"An employee was on the side of the highway after his work truck broke down. Due to the amount of traffic on the highway, the tow truck driver asked the employee to stay inside the work truck while it was being lifting. Once the truck was lifted, the employee stepped out of it and fell to the ground, resulting in cracked ribs and vertebrae.",1
"An employee was attempting to remove a clog in a butterfly valve when the valve closed on the employee's left hand, resulting in an amputation to the middle finger.",1
An employee was dismounting a standup counterbalance forklift when it turned slightly toward a rack and struck a steel beam. The tips of the employee's left little and ring fingers were pinched between the forklift and the rack. He was hospitalized and the tip of his ring finger was medically amputated.,1
"At about 8:15 a.m. on September 9, 2022, an employee was guiding a forklift inside a trailer as it moved a 1,084-pound skid of freight. The freight fell onto the employee, who suffered fractures to the ribs, collarbone, and shoulder.",1
"An employee was moving 100- to 150-pound stone panels by sliding them across A-frames. The straps on the stack of panels broke and the stack started fall. The employee was pinned between the panels and the A-frame, suffering a laceration to the right hand and a possible fracture to the right foot.",1
"An employee was using a meat grinder to shred chicken when the grinder blade cut their left index fingertip, resulting in an amputation.",0
An employee was conducting a torque test on a bearing when their finger was caught between the bearing housing and the bearing. The employee sustained a partial amputation to their right middle fingertip.,0
"On September 9, 2022, an employee was lifting a bag of linen when he lost his grip and fell backward, striking his back on a trash bin. The employee experienced pain in his back and subsequent numbness in his legs, resulting in hospitalization.",1
"An employee was opening a trailer door when a package fell onto his right shoulder and neck, resulting in injuries.",1
"An employee was working from the top of a third-story subfloor. While trying to retrieve an airline hose for a pneumatic nail gun, the employee fell through the guardrail system to the ground level two stories below. The employee suffered a broken left knee and an injury to the right leg.",1
"An employee was preparing to unload doors from a truck at a loading dock. When the employee unstrapped the doors, they tipped and fell on the employee, resulting in upper body blunt force trauma.",1
"An employee was operating a hydraulic press when it cycled. She suffered injuries to three fingers on her left hand, leading to the amputation of her middle fingertip.",0
An employee was exiting a pallet jack when his right leg was caught between it and a bollard. His tibia and fibula were broken.,1
An employee was using a machine to cut overlay for tires into smaller pieces. The employee was adjusting a strip of overlay when their left thumb was caught between the strip and a rotating bar. The thumb tip was amputated.,0
"An employee was dumping a waste container into a recycling compactor. Her left index finger was pinched between the cart frame and the plastic waste bin, and about 1/8 inch of the fingertip was amputated.",0
An employee was climbing down a ladder when it kicked out at the bottom. The employee fell to the ground and broke a bone in his lower left leg.,1
"On September 10, 2022, an employee suffered a lower back strain while lifting products to pack boxes.",1
"On September 10, 2022, an employee was vibrating poured concrete. A concrete boom truck's right front stabilizer sank into the ground; the truck tipped, and its boom struck the employee. The employee sustained multiple fractures, dislocations, abrasions, contusions, strains/sprains, and lacerations to multiple body parts, as well as a concussion. The employee was hospitalized.",1
"An employee was backing up a stand-up forklift. The employee's arm was crushed between the forklift and a pillar, causing an open wound from the wrist to above the elbow. The employee required surgery.",1
"An employee was working with a depalletizer when he noticed it was jumping. He got in a cherry picker, and was testing the tension of the chain, when the chain caught his glove and pulled in his left hand. He suffered a partial amputation to the left index finger.",1
An employee was operating a drill press. The press caught the employee's cloth glove and caused an amputation to the employee's left index fingertip.,0
"An employee was pushed down stairs by a client. She came to rest on a basement landing and her right leg was broken in two places, requiring surgery.",1
An employee was walking through a dock area. A forklift struck her leg as it backed out of a trailer. Her leg was broken.,1
"An employee was pulling a mattress from a shelf. The strap on the mattress broke, causing the employee to strike the floor and sustain a back injury.",1
An employee fell while getting up from a chair. She suffered a broken hip and was hospitalized.,1
An employee slipped on water while walking to a break room and suffered a broken femur.,1
"On September 11, 2022, a postal service employee was putting mail into a dumper when they were struck in the head by a piece of metal that came loose from a sensor, resulting in a contusion.",1
"An employee was performing a repair on a conveyor system. While two other employees were manually pulling on the conveyor belt, his little finger was caught in a gear. The fingertip was amputated.",0
"An employee was driving a stand-up forklift. The forklift hit a bollard during a turn, and her left foot was caught between the two. She suffered a fracture to the bottom of the foot.",1
"An employee tripped while walking into a patient room carrying linens. She fell to the floor, landing on her left leg and suffering a broken left femur.",1
An employee tripped and fell on webbing on the floor and fractured their femur.,1
An employee was operating a forklift when it struck a parked pallet jack. The employee suffered a laceration and a hairline fracture to the left leg.,1
An employee was disassembling wood pallets when a nail punctured his foot.,1
"An employee had climbed the derrick of a workover rig to cut a rope that was caught in the tubing board. When the tubing board fell and released, it bounced the rig and the employee fell. He caught himself on a section of the derrick frame about 10 to 15 feet below, stopping his fall but suffering a spinal injury at the neck, internal bleeding, lacerations, and contusions.",1
An employee fell through a water-damaged floor and landed on the floor below sustaining a broken forearm.,1
"On September 12, 2022, an employee was on a metal roof, installing a standing seam and insulation. He lost his balance and fell toward the third floor slab, which was 10 feet from the roof. His fall protection caught him and left him suspended about 2 to 4 feet from the slab. He suffered a brain bleed and a spinal fracture in his lower back. He was hospitalized.",1
"On September 12, 2022, an employee was steadying a marker board when his left hand was caught between it and a loader bucket. His middle finger was broken between the first and second knuckles, and he was hospitalized requiring surgery.",1
An employee was using a table saw to cut wood. The saw blade amputated the flesh on the employee's left index fingertip. It was unguarded at the time.,0
An employee was in the back of a closed box truck. Equipment exhaust filled the area and the employee was exposed to carbon monoxide.,1
An employee was retrieving a part from an in-line automatic chop saw. The saw activated and amputated the employee's left index fingertip.,0
"An employee fell from a fixed ladder, landing on a roof deck about 15 feet below and suffering a broken pelvis.",1
An employee was clearing a jam in a machine. Her left finger was caught and partially amputated in a conveyor belt.,1
"An employee was reaching to get some paperwork when the center drive chain of a powered roller conveyor caught his left glove. The chain pulled in the glove and his little finger, then partially amputated his index finger.",1
"An employee was assembling concrete forms. When he hit a nail on the form, it dislodged and struck him in the left eye. He was hospitalized.",1
An employee was opening a dishwasher when chemical entered her eye. She was hospitalized.,1
"On September 12, 2022, an employee was using an unloading device to unload packages from a delivery truck. When he moved the device, his right hand was caught between it and the back of the truck. He suffered a broken wrist and two broken fingers and was hospitalized.",1
"An employee was lubricating the winch drum and cable of a high mast lighting system. The system's halo fell from the cable supporting it and struck the employee, who suffered sprains and bruising.",1
An employee was loading racks onto the forks of a forklift. The weight of the material shifted and his left ring finger was caught between two of the racks. The fingertip was amputated.,0
"An employee was operating a machine in the field when his gloved right hand got caught in the machine, resulting in hand fractures.",1
An employee was moving a section of glass from a motorized pallet jack into a vertical washing and inspection machine. The jack moved unexpectedly and the section of glass fell off the pallet and pinned the employee against the washing and inspection machine. The employee was hospitalized with fractured ribs.,1
"An employee was rolling a 20-inch pipe weighing approximately 1,000 pounds by hand to prepare for shipment. The employee's right little finger was pinched between two pipes and crushed, resulting in an amputation.",1
"While working in a store, an employee was exposed to natural gas leaking from another business in the same mall. The employee became ill, suffering from lightheadedness, nausea, tightness in the chest, and numbness in the arm.",1
An employee was clearing out product that had accumulated in an ice cream machine's crunch basin when his right middle finger was caught in the machine. The employee suffered an avulsion and was hospitalized.,1
An employee developed carbon monoxide poisoning while grinding a floor using a propane power grinder. He was hospitalized.,1
"An employee was guiding a pickup truck to a portable generator. The employee was pinned between the generator and the trailer hitch, which caused a puncture wound and soft tissue damage to the employee's upper right leg.",1
"An employee fell while exiting a scissor lift, landing on a drydock floor about 10 feet below. The employee suffered two broken heelbones and a broken right knee and tibia.",1
"An employee was demonstrating the use of a trim brake machine to build trim. When the brake was activated, it crushed his left ring and middle fingertips and amputated the middle fingertip.",1
"An employee was standing on a stool, reaching for a stencil on a top shelf. The employee fell off the stool, landing on the concrete floor and suffering a broken left hip and shoulder. The employee was hospitalized.",1
"An employee was working from a ladder to install a screen on a gable vent. The ladder shifted and he fell to the ground about 25 feet below. He suffered three broken lower-back vertebrae; fractures to the shoulder, collarbone, and skull; and subdural hematomas.",1
"On September 12, 2022, an employee was driving a golf cart when it passed over low, uneven terrain. He fell from the cart to the ground and suffered a broken pelvis.",1
"An employee was stepping off a ladder onto a rooftop. He slipped on the wet roof and fell, landing on the concrete approximately 20 feet below. The employee sustained fractures.",1
A newborn calf kicked an employee above the left eye. The employee was hospitalized and required stitches.,1
"An employee was trying to clear jammed cardboard from a machine. His hand was caught in the machine's motor and shaft, which amputated one of his fingers.",1
"An employee was mowing a yard with a push mover. The employee slipped under the mower on a sloped part of the yard, and the mower's blade amputated the employee's left big toe.",1
An employee was installing a loader on a tractor. The employee was guiding the bucket into place when it caught their left little finger against a forklift tire. The employee suffered an amputation to the finger.,0
"At about 12:30 p.m. on September 12, 2022, an employee slipped on spilled orange juice on a hallway floor, fell, and suffered a broken left knee. She was hospitalized.",1
An employee was working on an electrical panel when an arc flash occurred. Both of the employee's forearms were burned.,1
"An employee was disassembling a valve when pressurized water was released. It struck the employee's right hand, causing broken bones and lacerations.",1
"An employee was using sand paper to polish a roll that was being turned on a lathe. The lathe pulled in the employee's right hand, causing the amputation of the ring and little fingers.",0
An employee was slammed to the concrete ground by a customer during an altercation. The employee suffered broken ribs.,1
"At 4:26 p.m. on September 13, 2022, a moisture was introduced to molten iron causing a steam explosion. A nearby employee felt and heard the explosion, causing him to strike the top of his hard hat on an air duct. The employee suffered a concussion and had difficulty breathing and was hospitalized.",1
A patient punched an employee in the right side of the head. The employee suffered a concussion.,1
"An employee was approaching a plant entrance with a lit cigarette. When he discarded the cigarette, it ignited oxygen that had been released during a tank-filling process. The employee suffered third-degree burns over 60 percent of his body.",1
"An employee was getting on a bus in a parking lot. The employee fell from the bus to the ground and suffered a head injury (with a brain bleed), broken vertebrae, and a broken shoulder.",1
"An employee was trying to untangle a chain from the trough of a catwalk. A winch was connected to the chain. The winch activated and the employee's hand became caught between the edge of the catwalk trough and the hook from the winch, amputating the employee's finger and thumb.",1
"An employee was walking out of the rain into a building. The employee slipped on a wet mat, then landed on the dry tile floor and suffered a dislocated kneecap. The employee required surgery.",1
An employee was opening the manhole cover to a blow tank. The employee was burned by black liquor.,1
An employee was doing electrical work. An arc flash caused the employee to suffer third-degree burns to the chest and hands.,1
"An employee was emptying a catch pan on a bun pan return line. Some buns were stuck around the belts; as he tried to remove them, the conveyor caught his glove and shirt sleeve and pulled in his right arm. He suffered broken bones in the forearm.",1
"An employee was threading a bag machine. The employee's left hand was caught between two rollers, and the palm was degloved.",1
"An employee was cleaning the belt on a folder/gluer machine when he slipped. As he tried to catch himself, his right hand was caught in the machine, breaking a finger and lacerating the palm.",1
"An employee was reaching to reset the drag chain of a conveyor, which was cocked sideways. When the chain was freed, the employee's hand was caught between the chain lug and a piece of metal. The hand was severely lacerated and the employee was hospitalized.",1
"An employee was sweeping dirt and debris into a pile to be picked up by a skid steer. A skid steer operator ran over the pile, resulting in a physical altercation between the two employees. The injured employee was struck in the face with the other employee's fist, causing the injured employee to fall to the ground and strike his head. He sustained a jaw fracture and head contusion.",1
A temporary employee was unclogging frozen meat that had stuck to a meat grinder as it thawed. The employee suffered partial amputations to the right middle and ring fingers.,1
"On September 13, 2022, an employee was installing a sign on an overhang approximately 10 feet above the ground when they fell through the soffit to the sidewalk below, resulting in broken back vertebrae.",1
"Employees were building a 10-foot trench box. A loader was supporting the box wall as one of the employees was setting the top pin. The wall slid and crushed the employee's left middle finger against the loader, the fingernail was pulled off and the fingertip was split down to the bone.",1
An employee was moving palletized wheat seed out of a truck onto a lift gate. He fell out of the truck and suffered a broken left humerus. He was hospitalized.,1
"An employee was climbing a ladder to remove a shackle from a concrete box culvert that had just been moved into place. He became disoriented and fell six feet from the ladder to the ground, striking his head.",1
"An employee was cleaning a tank. When the employee loosened a valve, black liquor sprayed onto the employee, who suffered chemical burns to the face, right arm, and right upper body.",1
An employee was continuity-testing wiring. The terminal he was working on erupted in an arc flash that burned his right palm and the side of his face.,1
An employee was using a pipe wrench to loosen a collar on a drilling tube. The pipe wrench broke loose and pinched the employee's right ring finger against the ground. The fingertip was amputated.,0
"On September 13, 2022, an employee was disassembling shelves in the parts room when an upright shelf fell, hitting his head and causing a laceration near his right eye.",1
"At about 10:05 a.m. on September 13, 2022, an employee was repairing a machine with a loose cylinder. He had locked out the main control panel and shut off all air; he was aligning the cylinder with the yoke mounts to insert a new bolt that would secure the cylinder. The cylinder still had pressure in it, and it extended 2 inches when it was moved. His left hand was crushed between the cylinder yoke and the framework of a skip hoist bucket. He suffered a broken index finger and a laceration to the palm.",1
"On September 13, 2022, an employee was in an aerial lift, installing brackets on a concrete electrical pole. His stomach contacted a 14,400-volt surge device, and he suffered burns to the stomach and right arm. He was hospitalized.",1
"An employee tripped on plastic strapping from shipping totes, fell to the floor, and suffered a dislocated left shoulder and a broken left arm.",1
"On September 13, 2022, an employee was clearing a jam in a machine's overflow tray. The slider tray engaged and caused an amputation to her right index finger. The machine was energized at the time.",1
"An employee was getting onto a pallet racking system. The employee's right foot went through the racking mesh, which lacerated the employee's leg.",1
An employee was stepping out of an articulating lift. His right foot hung up on the step and he fell backward to a hangar floor about 18 inches below. He struck his head and sustained brain swelling. He was hospitalized.,1
"An employee was clearing a jam in a poultry breading machine. The machine's incline chain caught his left hand, causing fractures and lacerations.",1
An employee was checking for air leaks between the air compressor and pumps near abandoned mobile office units when they were stung multiple times by bees. The employee sustained an allergic reaction and had a heart attack.,1
"An employee was laying bricks when a metal frame fell from a higher floor. It struck the employee on the back of his head, breaking his hard hat and fracturing his skull.",1
An employee was flagging on a road construction site on a hot day when they became dehydrated due to heat stress. The employee was hospitalized.,1
"At about 3:20 p.m. on September 14, 2022, an employee was reaching overhead to retrieve an empty 30-gallon drum from a storage rack. Upon retrieving the drum, he lost his balance and fell to the floor. He struck his head, and the drum struck him across the leg; he suffered a laceration to the leg as well as head trauma.",1
"An employee fell off a box into a shelf, suffering a broken left arm and wrist.",1
An employee was changing an electric motor when an arc flash occurred. The employee suffered burns to the hands and face.,1
An employee was lifting a dropped metal coil off the floor. He suffered a compression fracture to a thoracic vertebra and was hospitalized.,1
"A 105-pound cylindrical package was pushed onto a roller line, but rolled off it and fell onto an employee's right foot, breaking the big toe.",1
"An employee was reassembling the roller frame of a bulldozer. The roller frame was suspended from an overhead crane and bolted to the frame of the bulldozer. The employee was aligning the equalizer pin to reattach the roller frame, which was hung up on the equalizer bar. He was under the suspended roller frame, trying to use a sledgehammer to drive the equalizer pin out; when the pin was struck, the frame shifted off the equalizer bar downward about 4-6 inches and struck his left hip area. He suffered a fracture to the pelvic region.",1
An employee was mopping a staircase. He fell down the steps and suffered a sprained back and neck.,1
"An employee was giving hand signals to the operator of a telehandler to place a trash hopper loaded with tools onto a roof. The employee was standing between a wall and the trash hopper attached to the telehandler when the telehandler encountered rough terrain and the trash hopper moved, striking the employee and causing him to become caught between the wall and the trash hopper. The employee suffered a laceration above the right eye, three fractured ribs on the right side, and a fractured sternum.",1
"An employee fell from a forklift picker to the concrete about 16 feet below, suffering a back injury.",1
"An employee was climbing a fixed ladder to reach a roof. His right foot slid and he fell, landing on his right ankle and breaking it. He was hospitalized.",1
"An employee was steadying a copper rod in a lathe. The spinning rod caught his glove, causing the amputation of his left ring fingertip.",1
An employee was hospitalized for an allergic reaction to the employer-mandated COVID-19 vaccine.,1
"At 8:42 p.m. on September 14, 2022, an employee was pushing a roller plate back into a mold storage rack loaded with a mold. The eye hook on the top of the mold caught on the shelf above, causing it to tip and pinch the employee's fingers. The mold eventually fell; it struck the employee multiple times. The employee suffered an amputated finger, a broken knee, and a broken foot.",1
"An employee was stacking corrugated cardboard sheets. When walking to another stack, her foot was caught on a dunnage sheet on the ground and she fell to the floor, resulting in a broken femur.",1
"An employee was replacing a suspension airbag on a semi trailer that had been lifted with a jack. The trailer came off the jack and the airbag pinched the employee's right little finger, amputating the tip at the last joint.",0
"An employee was taking apart a meter. As the employee was taking apart the flow control choke valve, it came apart under pressure and a piece of it struck the employee. The employee suffered a laceration and a skull fracture above the left ear, as well as an injury to the left forearm.",1
An employee was pointing out a loose belt on a shear line. The belt amputated his right index fingertip just above the nail.,0
An employee was loading grease into a tanker. The employee was splashed with the grease and suffered severe burns to the right arm and hand. The employee was hospitalized.,1
"Employees were moving a 1,000-pound pallet of material toward the back of a box truck. One of them was using a hand truck, pushed under the front of the pallet, to help lift it; the hand truck slipped out and the employee fell off the back of the box truck. He landed on his head on the ground about 3 1/2 feet below, suffering a fracture to the left eye socket and a laceration in the same area.",1
An employee was bitten by a rattlesnake and was poisoned while walking down a paved path.,1
An employee was climbing down a ladder when he fell from the second or third step to the concrete below. He suffered eight broken ribs and a ruptured spleen.,1
An employee was training a new employee. A roller extruder was activated while the employee's hand was inside it resulting in amputation of their right index finger at the first knuckle.,0
"An employee was trying to unclog debris inside a mud pump. As he began to loosen the valve, pressure erupted from within the machine and blew the clogged debris out. He suffered a broken left middle finger.",1
A Bloem LLC employee was cleaning a press. The punch press was released and partially amputated her right thumb at the nailbed.,1
"An employee had used a ladder to access a one-story roof. He was descending the ladder when the ladder slipped and began to fall; the employee fell 10 feet to the ground below, resulting in two fractured ankles.",1
An employee was lifting a device on a vehicle while removing a final drive assembly. His right hand was caught between the final drive assembly and the vehicle's hull; the hand was crushed and the little finger was amputated.,1
"At 1:00 p.m. on September 15, 2022, an employee was on a utility pole disconnecting its cross-arms. The pole broke and the employee fell with it onto adjacent tree branches, then to the ground 30 feet below. The employee was hospitalized for multiple contusions and fractures to the head and torso as well as internal bleeding.",1
"An employee lost her footing in a parking lot, rolled her right ankle, and fell to the ground. She suffered a non-displaced fracture to the ankle and right forearm, and potential injuries to the left elbow and right hand.",1
"An employee was opening a drum door when their finger got caught between a rail on the drum, resulting in the loss of the nail part of the middle finger.",0
"An employee was banding a package of lumber in a cargo container. He tripped, fell, and hit his head on the bundle.",1
"An employee was cutting 15-inch concrete stormwater piping using a gas-powered cutoff saw. The saw kicked back and struck the employee, causing lacerations to the cheek and shoulder area.",1
An employee was putting rivets into a pair of jean pockets. The riveting tool punched a rivet through the employee's right index finger. The employee's fingertip was amputated.,0
"On September 15, 2022, an employee was welding when the sparks ignited an unknown substance on their fire-retardant shirt. The employee suffered burns to the torso and was hospitalized.",1
"An employee was dumping trash into a raised-top trailer using a forklift. The forklift's mast got stuck in the air. The employee tried to free it. When the mast came loose, the mast chain in the lift pulled the employee's right hand into a chain and sprocket. Three of the employee's fingers were amputated.",1
"While training a new employee, the trainer's right hand contacted the gears on a print head, resulting in a laceration to the little finger.",1
"On September 15, 2022, a temporary employee (employee 1) was using an electric pallet jack to pick up return pallets. The aisle was blocked by a stand-up rider jack. When employee 1 attempted to move it, the stand-up rider jack struck another employee (employee 2), who was in a kiosk receiving work orders. Employee 2 was admitted to the hospital to treat a broken right heel.",1
"On September 15, 2022, an employee slipped and fell in a room, resulting in hospitalization.",1
"An employee was cleaning printing equipment. The employee's left hand was caught in the in-running nip point between an anilox roll and a plate, causing amputations to the top of the employee's index, middle, and little fingers.",1
"An employee was using a chisel to dislodge a piece of wood from a feller buncher saw head. The employee lost control of the chisel, and due to the pressure of the wood that was stuck in the saw head, the chisel was propelled into the employee's neck. The employee was hospitalized with neck trauma.",1
An employee was loading groceries into a delivery vehicle's trunk when the trunk was closed on his left middle finger. About an inch of the finger was amputated.,0
A temporary employee was responding to a report of moisture on a roll at the strip anneal line. The injured employee was using an absorbent pad to wipe the moisture on the rollers when the pad and employee's hand were pulled into the pinch roll. The employee sustained hand fractures and lacerations that required stitches.,1
"An employee was on a middle rung of a nine-rung A-frame ladder, using a cloth to wipe down the external crossbeam of a bagging structure. The employee fell from the ladder to the concrete ground below, suffering a broken right clavicle.",1
An employee was screwing a metal panel down on a roof deck. Fiberglass fabric rolled up under his foot and he fell to the packed earth. He suffered a broken right femur and left heel.,1
"An employee was cleaning the upper area of an aircraft fuselage with a pneumatic vacuum. When the employee stepped on the corner of a floorboard, it tipped, causing the employee to lose his balance and fall on the same level. He suffered a contusion to the left-side ribs.",1
"An employee was setting up a moulding machine when their right hand contacted the rotating cutting head of the bottom planer, resulting in amputations to their right ring and middle fingers. The machine was not locked out or de-energized for the setup tasks and was not guarded at the time of the incident.",0
"An employee was on a step ladder, putting 3-inch pipe into hangers. One of the hangers broke free and the employee jumped off the ladder. He landed on the floor and suffered a broken leg.",1
"An employee was riding on a trash truck. When he jumped off the truck, he struck his head on the pavement and suffered a head injury.",1
An employee was using an alligator shear to cut copper tubing. The shear amputated the employee's left little fingertip.,0
An employee was preparing to rig a utility pole on the ground for lifting and placement. The pole was being positioned using a cant hook when it rolled into a ditch and fractured the employee's right ankle. The employee was hospitalized.,1
"An employee slipped on water that had backed out of a floor drain, and fell onto his left knee and then his hip and back. He suffered fractures to the hip and a lower back vertebra. He was hospitalized.",1
An employee entered an enclosed substation to get a tool. An arc flash caused second-degree burns to the employee's hands and arms. The employee was hospitalized.,1
"An employee was setting up an area to begin installing new pipes. Upon searching for an outlet to connect a power tool, the employee fell approximately 12 feet through the ceiling and landed on top of an oven tunnel. The employee sustained second-degree burns from the oven as well as a right tibia fracture, right ankle dislocation, right knee ligament tear, and a left arm laceration.",1
An employee was standing on a ramp awaiting the arrival of an airplane. The front tire of a baggage truck struck her left foot and injured it.,1
An employee was charging a new air conditioning unit when a hose broke free and struck him in the face. He suffered lacerations to an eye and an eyebrow.,1
"An employee was performing electrical testing on switchgear when an arc flash occurred. The employee suffered second-degree burns to the face, hands, and knees.",1
"An employee was disassembling a blower line. When the employee removed bolts to separate a portion suspended by a crane from the ground-mounted portion, the ground-mounted portion settled and crushed a finger on the employee's left hand against the guard rail of a scissor lift. The employee suffered an amputation to the fingertip.",0
"Employees were loading 4-inch by 6-foot pieces of cast iron pipe into the bed of a stake truck. One of the employees was in the front of the truck, closest to the cab, when the pipe was moved forward toward the cab. His left middle finger was caught between the pipe and the cab, and was amputated at the top right.",1
An employee was running a piece of acrylic in a jointer machine. The guard was knocked off the machine and the employee's left little finger contacted the rotating cutting head. He sustained a partial amputation.,0
"An employee was in a bucket lift, trimming a tree. The trimmer caught a power line, and the current caused second-degree burns to the employee's right hand, arm, left hand, and abdomen as it passed through him into the bucket lift. He then fell out of the bucket and landed between some tree trunks, suffering a broken rib.",1
"An employee was cutting a 1,000-pound steel bar when it rolled off the table and fell onto the injure employee left foot, resulting in amputation to the tip of their left big toe.",0
"An employee was exiting a tractor trailer while also pulling down the trailer's roll-up door. The door's nylon strap broke and the employee fell backward from the trailer to the ground, suffering a head injury.",1
"An employee was ripping boards on a table saw. He reached for the push board and the board kicked back. The employee slipped and the blade cut his left middle and index fingers, resulting in fingertip amputations.",0
"An employee was sliding a pallet for an electrical panel off a balcony. His foot became caught in the rigging or strap of the pallet, which pulled him from the balcony. He fell 13 feet and suffered a bruised lung and a ruptured spleen and kidney. He was hospitalized. There was no guarding on the balcony at the time of the incident.",1
"On September 16, 2022, an employee was hoisting a product from a CNC mill. The employee's left index finger was caught between the product and a positioning bolt as they guided the hoist. The employee suffered an amputation to the fingertip without bone loss.",0
"An employee was working next to a foundry flask when it shifted and pinned his legs, damaging blood vessels.",1
"On September 16, 2022, an employee was walking backward to pull banding wire from a spool when they tripped and fell on the concrete floor. The employee was hospitalized with fractures of two neck vertebrae and a laceration of the elbow requiring stitches.",1
"An employee had just completed a lock out/tag out of a machine and was activating the equipment to check and track the conveyor belt. The employee's hand was struck by the belt and his right index, middle, and ring fingers were caught in the unguarded belt and pulley. The employee's right index finger was amputated at the first knuckle, and he sustained fractures, contusions, and lacerations to his right middle and ring fingers.",1
"An employee driving a yard truck was parking the container when the container began to overturn, causing the cabin to bounce several times with the employee inside. He was hospitalized with three broken ribs, internal bleeding in his liver and head, and bruises on his face and head. He was hospitalized.",1
"An employee tripped on a rug while walking and fell, resulting in a fracture.",1
An employee fell into a 3-foot-deep trench while carrying a 60-pound valve casting. His little finger was pinned and broken between the casting and the hard dirt.,1
"On September 16, 2022, an employee was standing near a stationary forklift when another forklift struck the stationary forklift, causing it to roll over the employee's foot and resulting in crush injuries and broken bones.",1
"Employees were reconnecting a well head and hanging it back on the pumping unit. The block of the workover rig slipped, fell from the rod basket, and struck an employee. The employee sustained a crushed right leg below the knee and a fractured pelvis.",1
An employee was run over by a telehandler. The employee suffered a broken pelvis and was hospitalized.,1
"An employee was on a step ladder, removing pieces of tape from a wall. She fell from the ladder to the floor, suffering fractures to the hip and elbow.",1
"An employee working at a well site was preparing to deliver chemicals, which were in bulk totes mounted on a truck, to the field tank. While disembarking from the rear of the truck, the employee slipped and fell approximately 4 feet from the truck's ladder to the ground, resulting in a boot top fracture to his left tibia and fibula.",1
"On September 16, 2022, an employee was using a brake press to make trim for metal roofing panels. As he was adjusting the metal on the press' table, the press activated. His right hand was caught and fractured between the top of the press and the table. He was hospitalized.",1
"An employee suffered a reaction to an unknown object or substance, resulting in a body rash, swelling of the throat, and vomiting that required hospitalization.",1
"An employee tripped on a soiled-linen bag in a doorway, fell to the floor, and suffered a broken right arm.",1
Two employees were adjusting bar stock on a fixture surface. The bar stock fell and crushed one employee's left index finger against the fixture stand. The employee suffered an amputation to the finger.,0
"An employee was pushing metal nuts down a tray. A rotating threader jig caught the employee's glove, causing amputations to the employee's right middle finger and right ring fingertip.",0
An employee was cutting a 4-inch concrete block with a gas-powered concrete cut-off saw when his calf muscle was cut by the saw.,1
"On September 17, 2022, an employee was cleaning a deli meat slicer. While he was cleaning the blade compartment in the sink, his left thumb tip was amputated without bone loss.",0
"An employee was using a slicer to slice oranges when her thumb was caught between the blade and the orange, amputating the pad of her right thumb.",0
"An employee was setting up a mechanical punch press when the pedal was activated. The machine rotated and contacted the tip of his left thumb, resulting in a fingertip amputation.",0
"An employee was walking on a platform when he stepped on a roller. He lost his balance and fell, suffering hand fractures. He was hospitalized.",1
"An employee was walking through the facility when his foot became caught on plastic strapping, causing him to fall to the floor. The employee was hospitalized with a fractured left hip socket.",1
"An employee had climbed onto the rebar lattice for one of the walls of a concrete foundation and was tying rebar together using lengths of wire. While transitioning from one location to another, the employee slipped and fell about 8 feet from the rebar lattice to the concrete foundation below resulting in a laceration to the head. The employee was wearing fall protection but it was not connected to an anchoring point at the time of the fall.",1
"An employee was performing maintenance on a gearbox. His left hand was caught by moving parts inside the box, and the tips of his ring and little fingers were amputated.",0
"An employee was walking inside the nacelle of a wind turbine. The employee's foot slipped into a gap in the floor causing them to fall forward, and their foot became wedged. The employee's left and right tibias were broken.",1
"An employee was assisting customers when a customer pushed them to the ground, resulting in a broken wrist.",1
"A chair broke, and the employee sitting in it fell to the floor. The employee suffered a broken ankle and was hospitalized.",1
"An employee was walking away from her station to address a customer when she tripped, causing her to fall forward to the floor and resulting in a torn rotator cuff and multiple breaks in the left arm.",1
"An employee was using water and sanitizing foam to clean a snack processing area. The employee slipped and fell to the brick floor, suffering a broken left hip.",1
"An employee was trying to clean out a valve clogged with flour. Once cleared, the valve actuated and amputated the employee's left ring fingertip.",0
"On September 18, 2022, an employee was lubricating a chain and sprocket when they caught his right hand, causing the amputation of the thumb tip.",0
"An employee was walking down a parking garage entrance ramp when they tripped and fell at the bottom of the ramp, resulting in a fractured elbow and an inability to bear weight on their leg.",1
"An employee was preparing to tow a lavatory service cart back to the parking area. The employee was aligning and connecting the cart to the tow vehicle when their right thumb was crushed between the hitch and tow bar, resulting in an amputation.",0
An employee was training another employee on a gizzard peel machine. His hand was caught by the rollers and his palm was degloved.,1
"An employee slipped and fell on soup on the cafeteria floor, suffering a broken right knee.",1
"An employee was unloading air tubes while approximately 3 feet off the ground when he fell to the ground and landed on his back, resulting in a fracture in his back.",1
"An employee was assembling countertops when a router slipped and cut his thumb, hitting an artery. He was hospitalized.",1
An employee was standing on a ladder repairing a light fixture. The employee fell from the ladder to the ground; they were hospitalized with a broken leg.,1
"On September 19, 2022, an employee was seating a tractor tire on a rim when the side wall gave out at about 30 pounds per square inch (psi), and the rim struck the employee's left hip. The employee sustained a bruised left hip with a broken blood vessel.",1
"An employee was loading tools into the back of his truck. A car struck him from behind, its front bumper breaking his fibula and lacerating his left leg.",1
An employee was leaving work when he lost balance and fell face down onto a concrete driveway to the parking garage. The employee lost consciousness and sustained multiple abrasions on their face and a nose bleed.,1
"On September 19, 2022, an employee was helping a co-worker drill bore holes with an auger. As the auger was raised, his left index finger was caught by a moving part on the auger, resulting in a fingertip amputation without bone loss.",0
"An employee was raising a vacuum truck boom when it contacted an electrical line. He was shocked, the electricity entering his hand and exiting his foot.",1
"On September 19, 2022, an employee had been delivering mail and was having difficulty holding down water and was feeling overheated. The employee was hospitalized for dehydration.",1
An employee was retrieving a pallet jack when a forklift backed into her. She suffered a soft-tissue crushing injury to the leg and a broken left hip.,1
"An employee was using a steam/water line to soften a casing flex line. When he pulled the steam/water line out of the casing flex line, a combination of steam and water blew out of the casing flex line and into the his left boot. He suffered second-degree burns to the left foot.",1
"An employee and his crew were performing safety inspections on utility poles at a work site. Toward the end of the workday, at 3:00 p.m., the employee began to experience muscle cramps. The employee took a shaded break and hydrated but was unable to keep fluids down. The employee was hospitalized.",1
"An employee was cleaning a tank with a pressure washer. He bent down to clean debris and the pressure washer wand entered his boot, causing a laceration to the top of his left foot. The employee was hospitalized.",1
"An employee was using a hose to clean the floor in the feather area, when he lost his footing. Upon steadying himself, he contacted the auger blade. His left middle finger passed into a small opening on the underside of the auger trough resulting in amputation of the fingertip.",0
"An employee slipped and fell on a concrete porch, wet from rain. The employee fell and suffered a fractured skull",1
"An employee was getting out of his truck when he fell to the concrete below, resulting in a broken right ankle.",1
An employee was operating a reach truck when it began to slide on a wet floor. The employee's left foot slipped out of the truck and was caught between it and a pallet table. The employee suffered an open fracture to the foot.,1
An employee suffered a leg injury while working on a waste collection vehicle.,1
"An employee was descending a set of inclined ship stairs when she slipped and fell, breaking her right ankle.",1
"An employee was replacing the steel forks on a front-loading garbage truck. The steel forks were being lifted by a forklift. They were then lowered onto the employee, striking their leg. The employee suffered broken bones in their leg and foot, as well as an injury to the calf that required stitches.",1
"An employee was laying decking on the third level of a school that was under construction when they stepped onto a section that was not secured. The employee fell to the second-level concrete floor and the decking landed on top of him. He sustained fractures to his right femur, ankle, and wrist and lacerations to his left hand, hip, and nose.",1
"An employee was using the pressure plate of a press when the plate struck the employee's finger, resulting in an amputated finger.",1
"An employee was using an overhead crane to hoist and move a piece of equipment. The carrying strap holding the equipment broke and the equipment fell on the employee, lacerating his forehead and causing three fractures to his left leg and foot.",1
"An employee fell from a forklift to the floor, suffering broken ribs and a collapsed lung.",1
"An employee was attempting to move a steel plate from a plasma cutting table when the plate fell onto the employee's foot. The employee was hospitalized with a broken foot, which required surgery.",1
"On September 19, 2022, an employee was waiting for a truck to back up to a loading dock. The employee stepped onto the truck when the driver pulled forward to straighten out and the employee fell approximately 3 feet to the ground, resulting in a knee fracture.",1
"An employee was being trained on material handling equipment when they attempted to stop the forklift by reaching out their hand. The employee's hand got caught in warehouse racking, resulting in a partial amputation of the thumb.",0
"An employee was in a trench shield, directing a bucket. The bucket caught the employee against a spreader bar, and the employee suffered a broken shoulder blade and ribs.",1
An employee was rewebbing a plastic film printing press when his left index finger was caught in a chain and sprocket. The fingertip was amputated.,0
"An employee was using a digging bar to hold a sling in place as a derrick digger was pulling the power pole out of the ground. The sling pulled off the pole and struck the employee's right hand, breaking two fingers.",1
"An employee was walking down stairs when he fell, landing on his knees on a platform less than a foot below. He suffered torn patellar tendons in both knees.",1
"An employee was moving product on an electric riding pallet jack. The employee's right hand was caught between the pallet jack's steering handle and a stairwell. The employee suffered two broken fingers, as well as lacerations to the hand.",1
"An employee was re-assembling an air cylinder and aligning an end cap to fit properly with the cylinder barrel. When the end cap aligned and snapped into place, the employee's fingers were caught in the nip point where the end cap connects with the cylinder barrel. The employee sustained amputations to their left middle and ring fingertips.",0
"An employee tripped over a retractable reel extension cord and fell to the floor, suffering a broken leg and other fractures.",1
"A flagger was speaking with the driver of the first in a line of stopped vehicles. The third vehicle pulled out of the line and struck the flagger, breaking his hip. He was hospitalized.",1
"On September 20, 2022, an employee was installing wear pads under the newly installed mold carrier in a plastic injection press carrier. The employee used a crane with a nylon sling to slightly tilt the carrier so the wear pads could be placed. The sling failed, snapped, and struck the employee's left index finger, causing an amputation to the finger.",0
An employee was dismounting a riding lawnmower to remove a plastic bucket that was in the path of travel. The blades continued to rotate and the employee lost her footing. The lawnmower struck her left leg causing severe lacerations. The employee was hospitalized and her leg was medically amputated from three-to-four inches below the knee.,1
"An employee entered a cabinet to remove jumper cables from a rectifier device. When he reached out to steady himself, the blades of a nearby cooling fan lacerated his left thumb and index finger. The thumb was also fractured.",1
"An employee was cutting a downed tree into pieces with a chainsaw. The chainsaw hit a branch, kicked back, and lacerated the employee's calf.",1
"An employee was working adjacent to a paving machine during a bridge deck pour. While finishing concrete next to a leave out, his boot became stuck in rebar and he tripped and fell into the concrete pour as the paving machine was making a pass. The paving machine's table struck the employee and their left knee was pulled up between the two augers resulting in sprained knee ligaments.",1
An employee was driving a ride-on pallet jack toward a door. The employee's left lower leg was pinned and broken between the jack and a bollard at the door.,1
An employee tripped and fell on a curb in a parking lot and sustained three broken toes.,1
"On September 20, 2022, at approximately 6:20 a.m., an employee climbed into a rail car to open the rail car door and assist with unloading automobiles. The employee was spotting the buck ramp (unloading ramp) operator, who was lowering the ramp to the rail car. As he was guiding the ramp, his right leg was struck by the buck ramp, resulting in a fractured tibia and fibula.",1
"An employee was using a metal shear on an aluminum plate. His left hand was contacted by the shear blade, and he suffered amputations to four fingers.",0
"An employee was prepping special effects spark pyrotechnics rigs for a movie set on a constructed rooftop set. The employee was removing pyrotechnics materials from the location before performing a ""spark test."" A stray spark from a second test area ignited the box of pyrotechnics the employee was carrying, causing the box to burn. The employee was hospitalized to treat possible second and third-degree burns to her hands and fingers, as well as first and second-degree burns to her neck and face.",1
An employee was struck by a vehicle in a restaurant parking lot. The employee suffered a sprain and a hairline fracture.,1
An employee was moving a part from one pallet to another. A 130-pound steel plate shifted and pinched the tip of the employee's left ring finger. The employee suffered a partial amputation to the fingertip.,0
"An employee was walking out of a cooler through the deli department when he slipped and fell, hitting the corner of a steel preparation table. The employee sustained a broken rib and a collapsed lung.",1
"An employee was on a ladder setting precast concrete. A crane lowered a plank onto the employee's finger, crushing it. The fingertip was amputated.",1
"An employee was re-entering a forklift after adjusting the load on its forks. The forklift pinned the employee against a wall, causing pelvic fractures.",1
"An employee was walking up the stairs to the third floor when she became lightheaded. She fell through a knee wall onto a drop ceiling and fell nine feet, six inches to the floor below. She sustained a fractured vertebrae.",1
"An employee was assembling a gantry crane. The employee placed his left middle finger in a hole of the steel frame of the leg base when a co-worker lifted the attached leg assembly, which caught the employee's finger and resulted in a fingertip amputation and the loss of the fingernail.",0
"An employee was coming out of a building in an electric cart. The employee's left leg was caught between the cart and a concrete pole, and the lower leg was broken. The employee was hospitalized.",1
"On September 20, 2022, an employee was working at a ham-skinning station on a line. The employee had just skinned a picnic ham, and was reaching to place it back on the conveyor, when the skinner machine's tooth roller caught the sleeve of his protective frock. His left arm was pulled into the machine, which sliced the elbow and the back of the arm, causing an avulsion. He was hospitalized.",1
"An employee tripped and fell off a truck bed, striking their head on the ground and losing consciousness. The employee suffered a concussion and was hospitalized.",1
"An employee was stamping a lock using a hammer and small rod. As the hammer struck the rod, a piece of small metal from the rod bounced off and went into the employee's left arm.",1
"An employee fell from the fourth rung of a 6-foot ladder, landing on the ground and suffering a broken right arm.",1
"An employee was using a hand truck to move buckets of paint. The employee slipped on sand and the hand truck fell on the employee's left hand, breaking the thumb.",1
"An employee was cleaning up a chemical spill in a trailer. He walked out of the chamber and collapsed, suffering from heat-related dehydration.",1
"A drill collar was being lowered from a higher elevation pad next to the location where the rig was located. An employee placed a board as a chock under the drill collar. As the forklift forks were being removed from under the collar, the collar started to roll. The drill collar caught the right edge of the employee's boot and began to pull his leg under the collar. The employee sustained compound fractures to both bones in his lower right leg.",1
"An employee fell approximately 12 feet through a floor opening to the wooded floor below, resulting in fractures.",1
"An employee was working from a scissor lift, using an impact drill to remove the couplings from around the cap of a sprinkler main. When the cap was removed, pressure caused it to strike the employee in the chest. The employee suffered a broken sternum, broken ribs, a heart contusion, and a facial abrasion.",1
"An employee was carrying a bifold door down some steps. The employee tripped and fell to the ground, suffering a head laceration.",1
"An employee slipped and fell from a ladder, suffering a broken left ankle.",1
"An employee was using the hand grinder to remove shims from a dock leveler when the grinder got caught and kicked back, causing the blade to cut his right bicep.",1
"On September 21, 2022, at approximately 1:30 PM, an employee loading cardboard boxes into their vehicle tripped on a piece of equipment sitting on the loading dock. The employee fell to the concrete floor and sustained a fractured hip.",1
"An employee was trying to unplug an elevator leg. As the employee tried to lift the motor and drive belts to free the augers, the stored energy in an auger pulled the employee's fingers into a pulley and belt. The employee suffered an amputation to a right-hand fingertip.",1
A highway flagger was struck by a passing truck in a construction zone. The employee suffered arm and ankle injuries that required surgery.,1
"An employee was capping off an abandoned 6-inch water line. The valve controlling the flow to the line was turned off, but the valve wasn't working properly, so a small amount of water was leaking past. Water that was draining from the pipe built up pressure after the cap was put on. The employee was taping a wrap over the pipe when the cap blew out of the valve and struck his left hand against another section of the pipe, resulting in three fractured fingers, including a compound fracture of the little finger.",1
"An employee was guiding a 700-pound head rig roll being held up by a come-a-long. The come-a-long was loosened and the roll slipped and crushed the employee's left little finger, causing an amputation to the fingertip pad.",0
"An employee was in a lift about 4 feet in the air, cleaning the vents on a ceiling. He fell off the lift to the floor, suffering spinal fractures and a broken humerus.",1
"An employee was operating an industrial post machine when the machine failed to cycle properly, resulting in a ""double pour"" (a second lead terminal was poured before the previously poured terminal was removed). The employee proceeded to clear the terminals and the mold closed and pinched their right middle finger, resulting in amputation of the proximal portion of the finger.",0
"A pallet had been loaded onto a trolley to be picked up for wrapping, but a broken bottom board on the pallet was blocking an entry roller sensor, tripping it and preventing the trolley from moving. An employee removed the board and the trolley began to travel. Her left knee and thigh were lodged between the framing of the trolley and a stationary pallet insert line. She suffered a laceration to the back of the thigh.",1
"An employee was rigging a vessel with a chain so it could be moved by a crane. The crane hook began to move up, with the employee guiding the chain up to the point it would catch tension. His thumb was caught and crushed between the rigging and the vessel. The thumb was medically amputated from the first knuckle to the nail.",0
"An employee tripped over the lip of a lift gate at the loading dock and fell to the ground, suffering a broken right hip. The employee was hospitalized.",1
"A tractor's brakes failed, and the tractor bucket pinned an employee against a conveyor casing. The employee suffered multiple fractures and was hospitalized.",1
An employee was working with a coil-winding machine when it caught her jacket and pulled her in. She suffered a laceration to the bicep and a rib injury.,1
"An employee fell from the back of a flatbed truck to the ground, suffering a broken femur.",1
"An employee was unloading roofing products from a flatbed truck when they tripped over a strap on the truck bed and fell to the ground, resulting in a dislocated left ankle.",1
An employee was loading material into a shear cutting machine when they sustained an amputation to their right thumb.,0
"An employee was using a nail gun to nail pallets. As he put the nail gun down behind him, the trigger was activated and a nail punctured his heel, resulting in hospitalization.",1
"An employee was working on a milling machine when the milling blade contacted his left index finger, resulting in a fingertip amputation.",1
"An employee was operating a demolition robot. The machine shifted and its outrigger came down on the employee's foot, breaking the toe.",1
"An employee was moving garbage using a double pallet jack when his foot got stuck between a non-moving tractor trailer and the pallet jack, resulting in an ankle fracture.",1
"An employee suffered an asthma attack, caused by fumes from bleach being used to clean a room down the hall.",1
"An employee was installing waterproofing material. A hot chemical splashed on the employee's hand, causing a burn.",1
"An employee was operating a bevel saw when their finger contacted the router, resulting in a fingertip amputation.",0
"An employee was setting up a trench box when their finger was crushed by a guard rail, resulting in a partial medical amputation of the fingertip.",1
"During an aircraft egress drill, a firefighter suffered chest pain and shortness of breath. He was taken to the hospital for a heart attack.",1
Employees were using a hydraulic lift to remove an approximately 200-pound granite cover from a mausoleum slot wall. An employee fell from an elevated position approximately 15 feet to the sidewalk. The employee suffered a fractured skull requiring surgery.,1
An employee jumped across a 5-foot-wide trench and ruptured the quadricep tendons in both his legs.,1
"An employee was securing a load on a flatbed truck. The employee fell to the cement ground, suffered a broken right wrist, and was hospitalized.",1
"An employee was working in the morgue moving two deceased bodies when he fell, resulting in a lower back injury. The employee was hospitalized.",1
"An employee was on the ground at one end of a rafter, which a forklift was lifting using two wire chokers. As the forklift raised it, the rafter caught on a clip. The employee released it and it pinched him against the forklift. He suffered five broken ribs and cuts to his spleen and liver.",1
An employee was moving irrigation pipe from a field when electricity discharged from power lines. The employee was shocked.,1
"On September 21, 2022, an employee got off an aerial lift and onto the roof of a two-story house to blow off leaves using gas-powered leaf blower. The employee slipped, grabbed onto the gutter, and then fell approximately 28-30 feet onto a flower bed, resulting in a fractured sacrum and a laceration to his chin. The employee was hospitalized.",1
"An employee was getting ready to lift a piece of steel bar stock. The employee had applied a lifting device and was moving away from the center of the piece; the employee tripped and hit the end of the piece, suffering a broken jaw and a chin laceration. The employee was hospitalized.",1
"An employee was clearing tubing from the cutting area of a machine cutter. The cutter activated, causing an amputation to the employee's left middle fingertip.",0
An employee was building a retaining wall when it collapsed. The employee suffered a hip injury and was hospitalized.,1
"An employee was spraying a cleaning chemical foam in a hallway. The hose came loose, spraying chemicals in the employee's eye. The employee was hospitalized.",1
"An employee was exiting the passenger's side of a truck when he slipped and fell to the roadway, striking his head. The employee sustained head trauma.",1
"An employee began to feel ill while framing the second floor of a structure. He took a break, returned to work, and then lost consciousness due to heat stress/dehydration.",1
"An employee was clearing a bag in a fill machine when an electrically heated seal blade closed as her finger was inside the blade seal area, resulting in an amputation.",0
An employee was operating a mail sorter when his forearm was fractured.,1
An employee was scanning pallets when a forklift backed into him. He suffered a broken ankle and foot.,1
"An employee was walking through the plant when she slipped and fell to the concrete floor, resulting in a broken kneecap.",1
An employee fell off a ladder when it leaned sideways. The employee landed on the ground about 4 feet below and sustained a broken foot.,1
An employee slipped and fell in a hallway. The employee's right knee struck the concrete floor and the kneecap was broken.,1
"An employee was descending a staircase when he fell, landing on the floor and suffering a broken hip.",1
"An employee was adjusting a tarp on a truck. He fell from the truck to the ground, landing on his right side and suffering a broken hip, as well as an elbow injury.",1
An employee was riding a customer's motorcycle in a parking lot. The motorcycle hit some gravel and crashed. The employee suffered a fracture to the back.,1
An employee was standing at the top of the rig floor stairs guiding the rotary hose that was being hoisted with the rig winch. The hose was nearly at the rig floor when the wing half at the bottom of the hose was caught underneath the stairs. The stairs became disconnected from the rig floor and the employee at the top of the stairs fell approximately 15 to 18 feet to the ground.,1
"An employee tripped while getting up from a chair, fell to the floor, and suffered a broken right femur.",1
An employee was operating a guarded table router when her glove got caught by the router bit and her right little finger was pulled under the guard. The employee's fingertip was amputated.,0
"A skid steer operator was using the bucket to unload gravel behind bollards when the skid steer shifted forward, pinching the operator between the bollard and the seat of the skid steer. The employee sustained a broken arm and cracked ribs.",1
"A temporary employee was running a router when their glove was caught in the router, pulling their right hand into the spindle. The employee's little finger was amputated.",0
"On September 22, 2022, two employees were investigating a jam in the rewinder section of a production line. One of them was removing jammed material from the machine rollers while the other rotated them. The injured employee's left hand was caught between a roller and a stationary guide plate. The employee sustained a degloving injury to the left hand and thumb that required hospitalization and surgery.",1
An employee was driving a walkie rider pallet jack toward a parked truck. His right leg struck the truck and was broken.,1
"On September 22, 2022, an employee used an aerosol spray to oil a machine component. Oil dripped onto a hydraulic cylinder. The employee was wiping it off when the machine cycled and crushed the employee's right middle finger against a stationary block. The employee suffered a partial amputation to the finger.",0
"An employee was operating a forklift and was in the process of learning how to unload bulk trailers. The employee's left foot was pinned between the forklift and a barrier, resulting in a laceration to the left foot. The injury required stitches.",1
"An employee was preparing parts for an auto part washer. Metal shavings penetrated the skin of the employee's hands, which began to swell. He developed a bacterial infection.",1
"On September 22, 2022, an eye-bolt rigging failed while a 400- to 450-pound mold was being hoisted, causing it to fall on an employee's left foot. The employee sustained a fracture and a laceration.",1
"An employee's right toe was run over by a wheelchair, resulting in amputation.",1
"An employee was walking alongside a burned-out truck that was being moved into a yard by a tow truck. The employee's right foot passed in front of the driver's side tire rim, and the tire ran over the employee's steel-toed footwear. The employee suffered a lacerated little toe, a broken middle toe, and another laceration.",1
"On September 22, 2022, an employee was operating a packing machine when their glove was caught in a belt and pulley and pulled into the small opening of the heat sealer. The employee's left thumb was fractured and the tuft was amputated.",0
"At about 10:40 a.m. on September 22, 2022, two employees were loading a boxed shed into the back of a pickup truck. The product shifted and fell on one of them, knocking her to the ground. She suffered broken vertebrae and was hospitalized.",1
An employee was a passenger in a golf cart. He fell off and struck his head on the ground. He suffered a skull fracture and was hospitalized.,1
"An employee was retrieving a dog from the dryer after the dog's bath. As the employee opened the cage door and went to pet the dog, it bit her on the face, resulting in a laceration.",1
"An employee was using a bar to remove casting debris from a rotary screen. The bar contacted the rotating portion of the screen and bent, and the employee's right hand was pushed against the machine, resulting in a compound fracture. The employee was hospitalized and had surgery.",1
"An employee pushed a sectional sofa to move it out of the way of other employees using a pallet jack. Rather than sliding, the sofa tipped over. The employee fell, striking the back of her head on a metal cabinet. She suffered a brain bleed.",1
An employee was trying to clear a line of food material. An air-actuated ball valve was actuated and amputated the employee's middle fingertip.,1
"On September 22, 2022, between 12:00 p.m. and 12:10 p.m., an employee was using a hand auger to dig holes to construct a new fence at a residential site. The auger struck an underground electric line and the employee received an electric shock and was hospitalized.",1
An employee was attempting to step down from a truck bed when he slipped and his right arm landed on the deck of the truck; the roller door subsequently came down and pinned his arm. The employee sustained a muscular injury in his right arm.,1
"On September 23, 2022, a Tyson Prepared Foods employee was disassembling a bacon-slicing machine. When the employee tried to remove residual product from the belt and hold-down roller, the machine's blade caused amputations to the employee's middle and ring fingers and an avulsion to the index finger.",1
An employee was turning a powered industrial truck. The truck pinned the employee's ankle against the metal top rail in a rail-and-bollard system. The employee suffered a broken right ankle.,1
An employee sustained an avulsion while separating steel parts from a steel skeleton sheet and sorting them. The employee underwent a medical amputation to the finger.,0
"An employee was pushing a cart. Its handle broke and the employee fell to the floor, suffering a broken right hip.",1
"An employee was cutting off the tops of screws protruding through plywood, using an angle grinder with an abrasive cutoff wheel. The wheel exploded, and shrapnel from it severely lacerated the employee's left forearm and damaged an artery. The grinder was unguarded at the time.",1
"An employee was observing rice in cooling bins. The employee tried to get a sample of brown rice; a roller nip point caught the employee's right glove and pulled in the employee's middle finger, causing a partial amputation of the fingertip.",0
An employee was installing drywall tape from a 5-foot 9-inch mobile scaffold. The employee fell to the concrete floor and suffered a broken left forearm.,1
"An employee hit his head more than once on a metal platform, suffering bruises and injuries that required stitches to the face and head. The employee was hospitalized.",1
"An employee was transporting a stack of three kennels into a trailer on a shipping dock. The top kennels rolled backward and struck him in the head, causing him to fall backward himself and hit his head on the floor of the trailer. He was hospitalized.",1
"An employee was driving a mini bike around a parking lot. The bike went out of control, the employee fell, and the bike landed on him. His leg was broken at or just below the knee and he was hospitalized for surgery.",1
"Two employees were riding in a truck whose cup holder contained a bottle of alcohol-based cleaner. Some of the solvent spilled on one of the employees. Later, when he lit a cigarette during a break, the solvent ignited. He suffered burns to the hands and legs.",1
An employee was inspecting a crossover conveyor. The employee's right arm was caught by the conveyor and crushed from the forearm to the shoulder.,1
An employee was processing parts through a spot-welding machine. The machine caused a crushing injury to the employee's left index finger.,1
An employee sat on a bundle of 1.5-inch by 20-foot angle metal. The bundle rolled over onto the employee's right ankle and crushed it.,1
"An employee was setting up a roller coater machine. The rollers caught the employee's finger and pulled it in, amputating the fingertip.",0
An employee tripped over a concrete parking spot stop while exiting a vehicle. The employee fell to the ground and suffered a broken femur.,1
Two employees were transferring a 90- to 100-pound jack hammer from one vehicle to another. The hammer slipped from an employee's hand and fell on the other employee's right hand. The employee's thumb was caught and amputated between the hammer and one of the vehicles.,0
An employee was transferring an oil/gas scrubber into a scrap bin. The employee's arm was caught and broken between the scrubber and the wall of the bin.,1
"On September 23, 2022, an employee was lifting a 6-inch steel pipe when he suffered a herniated disk, and a fracture.",1
"On September 23, 2022, an employee was working 15 feet down in a manhole, preparing to reform the manhole with mortar. A 5-gallon bucket of mortar was being lowered down to the employee when the knot on its rope broke. It fell about 15 feet and struck the right side of the employee' s back. The employee suffered a spinal fracture in the lower back and was hospitalized.",1
"After checking a feeder chain, an employee was trying to remove a piece of metal. A moving sprocket caught his right hand, partially amputating his middle finger.",0
An employee's middle finger was caught between two road guardrails that were being stacked. The employee suffered a partial amputation to the finger.,0
An employee was operating a metal shearing machine when their left index and middle fingers were crushed by the clamp press. Both fingers were medically amputated at the hospital.,0
A border patrol employee was hospitalized for a heat-related muscular injury sustained during physical training activities.,1
"An employee was working with an automatic sheeting machine. The material was not feeding properly into the machine. The employee was trying to grab the material and pull it through when a blade in the machine amputated the tip of her left thumb above the knuckle, also cutting her left index finger.",0
"A tool came off the tracks of a machine. It struck an employee, causing a laceration/contusion.",1
"An employee was on an extension ladder using a pneumatic grinder to prepare a pressure vessel for welding. The ladder slid out from underneath him and the employee fell approximately six feet to the ground, landing on the ladder. The employee sustained a compound fracture to the right lower leg.",1
An employee fell from a ladder and suffered a broken right leg.,1
"An employee was assisting a co-worker in running a new piece of temporary cable from service/gear #1 to the existing transformer. The co-worker was feeding a cable through a plug to the injured employee, who had his right hand inside the switch gear #2 in order to grab the cable. An arc flash occurred as a result of switch gear #2 being energized and the employee was exposed to 480 volts of electricity, resulting in electrical burns to the left hand, arm, chest, and ear.",1
"On September 24, 2022, two employees were cleaning an aseptic processor room. When a stainless steel filter housing lid clamp was removed, sodium hydroxide solution heated to 170 degrees escaped and sprayed out onto the two employees. One of them suffered second-degree burns to the arms and shoulder.",1
"At 4:06 p.m. on September 24, 2022, an employee was operating an electric pallet jack when it went out of control and pinned his left leg against a warehouse rack. The employee suffered a broken left foot and was hospitalized.",1
"An employee was placing bottles into a cooler when a bottle exploded, causing glass to fly into the employee's right eye. The employee sustained a laceration.",1
"On September 24, 2022, an employee was operating a lathe when it caught their glove and pulled in their left hand and arm. The employee suffered an amputation to the hand.",0
"An employee was torquing bolts inside a gear box at a solar farm. The solar tracking system engaged and a gear caught the employee's hand, amputating the ring fingertip.",0
"On September 24, 2022, an employee slipped and fell to the ground after exiting a building. The employee suffered a hyperextended left knee.",1
"On September 25, 2022, an employee was operating a baggage tractor when it went out of control and struck parked baggage carts. The employee suffered a broken leg.",1
An employee was cleaning windows from a ladder. He fell off the ladder and suffered a broken hip. He was hospitalized.,1
"An employee was working on a pad-mounted transformer when he suffered a 7,200-volt shock. He was hospitalized.",1
"An employee was changing a water hose on a die machine. The employee had extended the ram of the machine fully to gain access to the water line. As the employee was checking the water hose, the hydraulics on the ram released, causing the ram to retract to its holding position. The ram caught the employee's hands, pinned them, and broke bones in both hands.",1
"An employee's left index finger was pinched between two pieces of steel that were on a forklift, causing a contusion and amputation to the fingertip.",1
An employee fell forward while walking down a hallway. Her elbow struck a raised curb at the side of the hallway and was broken.,1
"An employee fell out of a golf cart, landing on the concrete pavement and suffering head and elbow injuries requiring hospitalization.",1
"On September 25, 2022, an employee tripped and fell to the floor, suffering a broken left hip. The employee was hospitalized.",1
"An employee fell while walking behind a bakery counter. The employee suffered a head injury, with swelling, and was hospitalized.",1
An employee was using a meat saw to cut a rack of chops. The sawblade amputated his right index fingertip.,0
An employee was reaching out of a postal vehicle to put mail in a mailbox. She fell out of the vehicle onto the street and suffered a broken arm that required surgery.,1
"At about 1:20 p.m. on September 26, 2022, an employee was inspecting a house that was being remodeled when he fell through an opening on the second floor where stairs were going to be constructed. He struck some scaffolding and landed on the first floor. He suffered injuries to the right wrist, right elbow, left leg/knee, neck, and mid- to lower back. He also suffered five broken left-side ribs and bruised/collapsed lungs.",1
"An employee was descending a ladder that was leaning on a telephone pole. He fell from the ladder to the ground, breaking three ribs.",1
An employee was installing vertical metal studs when he lost his balance and fell backward onto the wall behind him. He came into contact with a stud and suffered a laceration to the left shoulder and upper left back.,1
"An employee had entered an air handler to change a filter. He slipped, striking his head on the floor and suffered a head injury.",1
"An employee was felling a tree when part of the tree made contact with the employee, resulting in a right femur fracture and head laceration.",1
"An employee was climbing down an installed ladder from a roof. He fell from the ladder to the floor about 10 feet below, suffering a compound fracture to the right ankle.",1
"At about 3:15 p.m. on September 26, 2022, an employee was feeding units into a packaging line when the star wheel became blocked by a tipped unit. The employee's left hand was caught in the machine, and the employee's ring finger was amputated.",0
"An employee was trying to reach the center of an I-beam (lying on the back plate of an injection mold) to attach crane rigging to it. When he pulled the beam toward himself, it shifted and crushed his left little finger against the mold's back plate. The fingertip was medically amputated.",0
"An employee was loading steel bundles at a production saw. The employee unstrapped one end of the double stack of tube steel while the saw operator was moving the stack at the same time.  The bottom bundle fell off the roller conveyor, striking the employee in the pelvic area.",1
An employee was using a machine to thread rebar. The spinning bar amputated the employee's finger and thumb.,1
"An employee was operating a roller machine when his gloved right hand went into the roller. He suffered amputations to the middle, ring, and little fingers.",1
An employee was hospitalized with a collapsed lung after pulling heavy mail transport equipment.,1
"An employee was assembling a machine. As he was placing a roller assembly onto the posts that held it in place, his right ring finger was caught between a post and its hole. He suffered a partial amputation to the fingertip.",1
"On September 26, 2022, at approximately 7:30 a.m., an employee of Pat and Son Towing was assembling a 14-foot by 2-foot trench box to be delivered offsite. Their left index finger was caught between a spreader bar and the wall of the trench box and was partially amputated.",1
An employee was assisting a gantry crane operator with maneuvering a spreader bar magnet over a steel plate. The magnet was lowered onto the plate and crushed the employee's left foot.,1
"On September 26, 2022, an employee was on a step ladder to adjust a belt tail pulley on a commingle machine. Momentum from the adjustment caused the employee to slip on the ladder. He attempted to brace himself and his arm was pulled into the machine's rotating belt. The employee sustained a degloving injury and fracture to the right forearm, as well as a dislocation of the right shoulder.",1
"An employee was in a dumpster being moved by a forklift when the dumpster overturned. The employee fell to the ground and was struck by the dumpster, resulting in injuries to his face, head, and left arm. The employee was hospitalized.",1
An employee's right middle finger was pinched between a tote and the sill of a truck's hopper. The fingertip was amputated.,1
"An employee was pulling cardboard from a rotary die cutting machine. The machine grabbed the employee's right glove, pulling the employee's hand into its feed section. The employee suffered three broken fingers and a broken wrist, as well as friction burns to the right hand. The employee was hospitalized.",1
"An employee fell down stairs from a platform to the floor, suffering a head laceration, a broken pelvis, and a broken arm. The employee was hospitalized.",1
"An employee was working on a large milling machine, about 12 feet high. The product adjustment cable was hooked to the platform; when the machine moved, the platform failed and developed a 45-degree slant. The employee fell through the guardrail and landed first on a machine table about 9 feet below, then on a machine cover a foot below that. The employee suffered a broken pelvis, hip, and left forearm; broken ribs; and internal bleeding from the spleen.",1
"An employee was pulling a customer order. The employee's sock was caught on a skid and the employee tripped over a pallet, fell to the concrete floor, and suffered a broken hip.",1
An employee fell into a hole and broke his ankle.,1
An employee was metering soap slugs into a die press. The press amputated a fingertip on the employee's right hand.,0
"An employee was using a sledgehammer to close a 2 1/2-inch clamp. His right index finger was caught between the clamp handle and the clamp just as the sledgehammer hit the clamp. The tip of the finger, just before the first knuckle, was crushed and amputated.",0
"On September 26, 2022, an employee was descending a ladder on the back of a semi trailer. The employee fell to the ground, suffered a broken left hip, and was hospitalized.",1
"An employee was driving a forklift. As he drove through a narrow space, his left foot was caught between the forklift and raw material. The forklift then moved forward rather than stopping, further crushing his foot. He suffered a fracture to the foot, as well as displaced metatarsals.",1
"An employee was taking out trash when his foot became tangled in an electrical cord. He tripped and fell, landing on his left side on the concrete ground and suffering a broken hip.",1
"An employee was riding on a side-by-side landscaping vehicle. He fell from the vehicle and struck his head on the ground, suffering head trauma.",1
"Employees were moving an empty filing cabinet down stairs. It slipped and fell down the stairs onto an employee, who suffered a broken back and a dislocated ankle.",1
"On September 26, 2022, an employee was processing a part when a brake punch grabbed his glove and pulled his finger underneath the brake press. His right index fingertip was amputated just below the nail.",1
"An employee had replaced a jumper on a de-energized line and placed an armor rod on an energized line. The jumper contacted a battery-operated crimping tool and he was shocked, suffering burns to the left hand and left leg.",1
"An employee was making a delivery and unloading freight from a trailer. A piece of freight on the trailer fell and crushed the employee's left index finger, causing an amputation to the fingertip.",0
"A crane operator was removing lifting clamps from a steel girder. As the operator was raising the hoist to remove the clamps, the girder titled and fell pinning him between the girder he was removing the clamps from and a girder behind him. Both of his femurs were broken.",1
"An employee was driving a golf cart. While maneuvering the cart to avoid a collision with a vehicle, he was ejected to the ground and suffered a broken leg.",1
An employee was parking a front-ride pallet jack. His right foot was pinned between the pallet jack and a floor stop guard at the battery changing area. The big toe and the second toe were crushed and partially amputated.,0
"An employee was putting a motor and plate back on a starch pump. As he balanced the motor between his forearms and guided the adjustment bolts into the plate holes, the motor slipped out of his arms. His left little finger was pinched between a nut, a washer, and the plate, causing an amputation to the finger.",1
"An employee was operating a rivet press, with a specialized tool in place to hold a rivet in the hole of a leaf spring. The employee's left index finger was caught between the tool and the leaf spring, and the fingertip was amputated.",1
An employee was trying to unlatch a gate. The employee's right little finger became stuck in the latch; the fingertip was amputated.,0
An employee was helping load a trailer. The vehicle was jostled and his left middle finger was crushed between the truck and the hitch. He suffered an amputation to the finger.,0
"An employee was working from a ladder, painting around a light. The ladder slid out and the employee fell to the ground about 10 feet below. He suffered a broken left leg and ankle.",1
"On September 26, 2022, an employee was trimming a carcass using a straight knife. The knife lacerated the employee's left kneecap, and the employee was hospitalized.",1
An employee had just set a concrete panel on a bridge deck when he fell from the edge of the deck to the compacted ground 13-14 feet below. He suffered fractured ribs and vertebrae.,1
"An employee was checking a vehicle for an unusual noise and vibration. The vehicle's serpentine belt caught his left hand, causing cuts to his index, middle, and ring fingers and lacerating a tendon.",1
"A 2,000-pound bobbin had fallen over while being moved. A temporary employee was trying to help push it upright when it fell over again, landing on the employee's left leg and breaking the knee.",1
"An employee was using a plasma cutter to cut a hole in a 55-gallon paint drum, using a circular steel plate as a guide. As he pierced the lid of the drum, pressure ejected the lid and the steel plate upwards. The lid struck the employee's left arm and hand. He suffered acute carpal tunnel syndrome in the arm, compartment syndrome in the hand, and fractures to the arm, wrist, three metacarpal bones, and the thumb.",1
"Two employees were putting a metal frame together. One of them was holding part of the frame steady as the other part was slid in; when the two pieces came together, her left middle finger was caught in a hole in the frame and partially amputated by the metal.",0
"An employee was carrying materials to a dumpster area. The employee tripped over threaded rods and fell onto metal lintels, suffering back and right shoulder injuries.",1
"An inoperable articulating lift was being pushed by a transport cart onto a flatbed trailer, with an employee in the cage steering the lift. The lift fell off the side of the trailer, and the employee suffered broken bones. Another employee was thrown into a wall in the same incident and suffered injuries but was not hospitalized.",1
"An employee was climbing down a ladder. The employee fell to the ground level about 12 feet below, possibly suffering two broken legs.",1
"An employee was moving a stuck package from a conveyor line. His finger was caught in a drive chain on the conveyor, which amputated part of the finger.",0
An employee's left middle finger was caught in a belt and pulley on top of a molder. The fingertip was amputated.,0
"An employee was placing a dock plate at the end of a truck trailer. The dock plate came down on his left hand, lacerating it and causing ligament and tendon damage. He was hospitalized and required surgery.",1
"On September 27, 2022, an employee was using a radial arm saw to cut a board. As he was pulling the sawblade across the board, the blade injured his left arm. His hand was medically amputated above the wrist.",1
"An employee was loading valves onto a truck. A valve was dropped and debris from the trailer struck the employee in the left eye, injuring it.",1
"An employee was backing up on a walkie rider when it hit a fence. She fell off the walkie rider, which pinned her against the fence and broke her lower leg.",1
"An employee was standing in the company parking lot when they were struck by a car. The employee's head struck a window of the car and he then fell to the ground. The employee was hospitalized with injuries to the face and head including a concussion, laceration, bruising, and abrasions.",1
An employee was removing a blade from a drill press. The press's drill bit amputated her middle and ring fingers.,0
"An employee was performing maintenance on a stacker system. Slack developed in a chain, and when it tightened the employee's left little finger was caught in the chain and sprocket. The finger was amputated.",0
"Two employees were trying to put an HVAC unit into place for installation. They were using a manual pallet jack to elevate the unit enough to remove four-wheeled dollies from under the unit's legs. They removed the dollies on one side of the unit, but when one of them began to remove a dolly on the other side, the unit began to tip over. The employee suffered a left knee injury while quickly getting away from the falling HVAC unit.",1
"At 8:45 a.m. on September 27, 2022, a FedEx employee was moving a container of freight from a truck on a mobile conveyor with rollers. He slipped and fell, and the container fell off the conveyor onto his right leg. The leg was broken and he was hospitalized.",1
An employee was struck on the shoulder by a forward moving forklift. He fell and the forklift ran over his left foot. A toe on the foot was amputated.,1
"An employee was cleaning out the rollers of an extruder. The rollers pulled in the employee's glove, causing a degloving to the left hand.",1
An employee was cleaning an area when her glove was caught by a chain and sprocket behind a conveyor. Her right thumb was pulled in and the thumb tip was amputated.,1
"An employee was operating a pallet jack. While he was backing up, his right foot was pinched between the pallet jack and a rack. The second toe on the foot was broken.",1
"At 10:30 a.m. on September 27, 2022, two employees were working on a roof near the edge. Employee 1 began to slip when handing employee 2 a steel shingle, and grabbed onto employee 2. Employee 2 then fell off the roof, landing on landscaping rock on the ground below and suffering multiple fractures of the vertebrae. Employee 1 regained control on the toe board and did not fall.",1
"An employee was replacing a heat pump filter in a guest room while standing on the third rung of a 4-foot step ladder. He fell backward from the ladder, landing on both it and the ground, and suffered a broken right leg and a bruised right elbow.",1
"An employee was offloading asphalt from a truck to a tank. As the system was pressurized, hot asphalt struck the employee in the face and chest. The employee suffered burns to the face and chest, as well as a broken sternum and ribs. The employee was hospitalized.",1
"On September 27, 2022, an employee was operating a metal lathe. The clamp holding the part in the lathe loosened when it began rotating, and the part struck the employee's left arm. The employee suffered multiple fractures to the arm and was hospitalized.",1
"An employee was servicing a propane-powered forklift when his right hand came into contact with the motor’s fan blade, which amputated his index and middle fingers. He was hospitalized.",1
"An employee was cutting a carbon steel pipe when another pipe rolled into him and struck his right hip, resulting in a fractured hip.",1
"An employee was unloading product from a sack, carried on a forklift, into a hopper. The forklift lowered the sack, which pinched the employee's left forearm against the hopper. The employee was hospitalized with a muscular injury requiring surgery.",1
An employee was operating a drill press when its bit caught the employee's glove. The employee suffered amputations to the hand and fingers.,1
"On September 28, 2022, employees were offloading steel plates from a barge. While a plate was being lifted, the injured employee walked between the plate being lifted and a pile of plates approximately 2 feet away. The plate being lifted swung toward the employee, and their left leg was crushed between the plate being lifted and the plates behind them, resulting in a broken left leg.",1
"An employee was webbing a machine when the machine began running, amputating his right middle and index fingertips. The machine was guarded at the time.",1
"An employee was unloading vehicles from a car-carrying trailer. As the employee was removing a pin from the loader, the loader was activated and crushed the employee's thumb.",1
An employee was removing a snapped bolt from a die cutting window when a piece of broken drill bit impaled his left eye.,1
"An employee was repairing a hole punching assembly. He used a small machinist hammer to free the boost cylinder, then lubricated the shaft and tested the cylinder. As he was retrieving the machinist hammer at the base of the punch, the roll forming machine activated and the punch struck his right ring finger. He suffered a fingertip amputation.",0
An employee was checking a ditch when they were struck by a mini excavator and sustained injuries.,1
An employee was driving a forklift when it rolled over. The employee suffered a broken leg.,1
"An employee was trying to remove a piece of plastic from a sprocket and chain that drove a cooling bed. The cooling bed moved forward and the employee's right hand was caught in the rollers, which lacerated and fractured the employee's thumb.",1
"An employee was removing 4-inch by 12-inch wooden tire chocks from a meat processor modular unit. A tire chock was thrown into an electric cart and landed on the gas pedal. The cart struck the employee and pinned him against the bottom frame of the modular unit. The employee was hospitalized for fractures of the ribs, shoulder, and vertebrae as well as a punctured lung.",1
"An employee was climbing down a 5-foot-tall masonry scaffold using the ladder on the side. His foot slipped on the rung and he fell backward from the ladder, landing on 1-inch PVC electrical conduits stubbed up out of the ground. A conduit broke a thoracic vertebra.",1
"An employee was moving 2-by-4-by-8 lumber from a production line to a cart. His middle finger was caught under some lumber, which crushed his finger against another piece of lumber on the cart. The fingertip was fractured.",1
"An employee was loading a large gear box onto a wooden skid using an overhead crane. His left thumb was caught between the gear box and the skid, and he suffered an amputation to the thumb.",0
"An employee was helping place a pallet jack on a storage trailer. The pallet jack slipped, causing the employee to fall off the trailer and suffer a broken ankle.",1
"On September 28, 2022, an employee was walking outside a hotel. The employee slipped on water and fell, suffering a hairline fracture to the right ankle and a dislocation and fracture to the right elbow. The employee was hospitalized and required surgery.",1
"A powered industrial truck was turning when its tire struck an employee, who suffered a broken right leg.",1
An employee was operating a concrete coring machine when its bit ricocheted and severely lacerated his face.,1
An employee was sitting inside of a shipping container doing paperwork with the doors closed while a generator was running. The employee developed carbon monoxide poisoning and lost consciousness.,1
"On September 28, 2022, an employee was disposing of construction debris when she was struck by loose cabling that had become entangled in the wheels of a delivery truck. When the delivery truck pulled forward, the cabling knocked her to the ground. She suffered a pulmonary contusion, two broken ribs, and a broken right collarbone.",1
An employee was stepping off a roof onto a ladder when a rung on the ladder broke. The employee fell and suffered a broken femur.,1
"At 11:30 p.m. on September 28, 2022, an employee slipped on a wet kitchen floor and fell, suffering a broken hip. The employee was hospitalized.",1
"An employee was troubleshooting a jammed bander. The employee's left index finger was pinched in the bander's jaws, which amputated the fingertip.",0
"At 12:53 p.m. on September 28, 2022, an employee parked a forklift order picker, then fell from the platform to the ground 51 inches below. The employee suffered a head laceration.",1
"An employee fell backward off the back of a flatbed trailer, landing on the pavement about 5 feet below and suffering a broken elbow and humerus.",1
"At about 1:40 p.m. on September 29, 2022, an employee was parking a double jack alongside a dock rail. Her lower leg was caught between the jack and the rail and broken. She was hospitalized.",1
"An employee was using an air torque wrench to install a track frame to the car body of an excavator when his right middle finger was pinched between the tool and the frame, resulting in a partial amputation.",0
An employee was climbing up a ladder when it began leaning. The employee fell off the ladder and broke his ankle.,1
"An employee was riding on a forklift. The employee was pinned between the boom that raised the forks and the forklift itself, suffering a spinal injury.",1
"An employee was driving a tractor when it flipped and pinned him, breaking his leg.",1
An employee was monitoring product as it moved down a conveyor. The employee was adjusting some product on the conveyor when the rollers caught her hand. Her arm was amputated.,0
An employee was using unknown chemicals to clean fire soot. The employee inhaled the chemical and was hospitalized for respiratory failure with hypoxia.,1
"An employee was helping as a crane lowered a large metal plate. As the plate was being put into place, it struck the employee's left foot and broke it. The employee was hospitalized.",1
"An employee was walking near a stacker machine when a stack of four or five compost-filled trays fell from it. One of the trays struck the employee's right ankle, breaking bones.",1
"An employee was trying to thread material into a machine. His index finger was caught in the machine's point of operation, and he suffered an avulsion to the nail as well as an open fracture.",1
"An employee was thrown from a horse to the ground, resulting in lower back and pelvis injuries.",1
An employee was clearing jammed edgings in a saw mill when his left hand was caught in the edger's chain and sprocket. The employee's right index fingertip was amputated; he also sustained lacerations to his right ring and little fingers.,1
"At about 8:00 a.m. on September 29, 2022, an employee was laying concrete blocks when one fell on the back of his leg. The employee was hospitalized.",1
An employee was closing a gate. His right index finger was caught in a gate chain and was partially amputated at the nailbed. He was hospitalized.,1
"An employee was torching a joint for an HVAC compressor on a roof. Oil residue from the compressor caught fire, and the employee suffered first- and second-degree burns to the arms and the side of the face.",1
"An employee was opening a dock door. The spool wheel that held the wire for the door's counterbalance weight broke; the door fell and struck the employee on the head, shoulder, and lower right leg. The employee suffered a broken ankle.",1
"An employee jumped into a skid steer that another employee was operating. The controls activated, causing the bucket to come down and pinch his left foot. He suffered a broken big toe and was hospitalized for surgery.",1
"An employee was moving a 55-gallon container using a dolly when they fell from the back of a truck to the ground below, resulting in a fractured left elbow.",1
"A forklift operator was pinned between a forklift and a rack, suffering a collapsed lung and three broken ribs.",1
An employee was helping six other employees lift a 500-pound window panel. He suffered a muscle injury to the back.,1
"An employee was standing within arm's reach of a pickup truck tailgate. The tailgate was opened and fell onto the employee's right hand, causing the amputation of the index fingertip.",0
An employee was trying to dislodge meat from a grinder. The grinder's blade caught his finger and caused a partial fingertip amputation.,0
"An employee was raking behind a paver. A semi truck backed into the employee, who suffered broken feet and a broken kneecap.",1
"An employee was detaching a cord that was propping a door open. The door's automatic closure shut the door, which caught the employee's hand and caused a fracture and partial amputation to a finger.",1
"An employee was unloading a truck with a pallet jack. The loaded pallet jack passed over a dip in the walking surface, went out of control, and pinned the employee against a pallet. He suffered injuries to both knees.",1
"On September 30, 2022, at approximately 4:30 p.m., an employee was picking up a payment at a customer's residence when a dog attacked them, resulting in an amputation to their left little finger.",0
An employee was attempting to repair a forklift when he sustained a right index fingertip amputation.,0
An employee was walking on a sidewalk to enter the building when she fell onto her left side. She suffered broken ribs and a possible concussion.,1
An employee was cutting a 2-by-4 with a circular saw. The saw amputated the employee's left thumb above the knuckle.,1
"The injured employee was standing on the driver's side of a flatbed truck while another employee was using a forklift to load metal plates. As the forklift operator was removing the forks from the top plate, it began to slide. The injured employee's left middle finger was caught between the lifting eye of the two plates, causing his hand to be crushed between the top and bottom plates. He sustained a partial amputation to his left middle finger.",1
An employee was attempting to remove a hose from a transport truck carrying hot liquid asphalt when some liquid asphalt contacted the employee's arms. The employee sustained burns to both arms.,1
An employee was stepping down from the last step of a two-step stool. She fell to the ground and suffered a broken left tibia.,1
Two employees were working on a worksite from a baker scaffold with an extension ladder tied to it. One employee was descending the extension ladder when the tie broke and caused the employee to fall approximately five feet to the ground. The employee sustained a hip fracture that required surgery.,1
"An employee was cutting rebar with a handheld saw when sparks were generated, causing the employee's clothes to catch fire. The employee sustained a second-degree burn to the stomach.",1
"On September 20, 2022, an employee was unloading a press. A piece had become stuck in the press's top die, and when the employee tried to unload the disc from the press, the stuck part fell out of the top die onto his right forearm. He suffered a compound fracture to the arm and was hospitalized.",1
An employee was throwing a piece of angle iron into a dumpster. The angle iron caught his glove and his right thumb against the top of the dumpster. The thumb was medically amputated.,0
An employee was cleaning a mixer when its blade caught the employee's ring finger. The finger was amputated at the first knuckle.,0
An employee suffered an asthma attack while checking in a clinic patient who was wearing perfume.,1
"An employee was installing a wiper blade on a customer's car when he tripped over a curb stop and fell, striking his head on the concrete. The employee sustained injuries to his head and face.",1
"On September 30, 2022, an employee was assembling a bucket in a tilt bucket booth. The bucket's tack welds broke and it fell. It pinched the employee's right index fingertip against a table, causing the amputation of the fingertip.",0
"On September 30, 2022, at approximately 12:15 a.m., an employee was finishing the task of scrubbing the inside of a cabinet in the harvest floor basement. As the employee was closing the lid, the Clean-in-Place (CIP) system started. The employee let go of the lid and his left ring finger was crushed between the corner of the lid and the lip of the cabinet. The employee sustained a partial amputation of the distal phalanx on the left ring finger.",1
"Two employees were installing a motor belt onto a piece of equipment when an employee's right middle finger was pinched between the motor pulley and the belt, amputating his fingertip.",0
"An employee was unclogging a taping machine. While retrieving a glove that was dropped, the employee's left arm became caught in the machine and was fractured.",1
An employee was operating a bending machine when they suffered a laceration on their finger while their foot was on the pedal of the machine.,1
An employee was working on a piece of equipment. The employee's right ring finger was caught between a tool and the piece of equipment. The fingertip was partially amputated.,0
"An employee was attacked by a resident at a domestic violence shelter. The employee suffered a closed head injury and bruising to other parts of the body, caused by an impact with a stair railing.",1
An employee was picking up discarded cardboard boxes and throwing them away when they sustained a hernia.,1
An employee was leaving work after finishing their shift and fell down the stairs outside the store sustaining a fractured hip.,1
An employee fell while walking down a set of stairs and struck her head on the drywall. The employee sustained a head contusion and a fracture to her left arm.,1
An employee was using a meat grinder when it began to make a loud noise. The employee was investigating when it amputated his right middle fingertip.,1
"An employee was operating a gear coining machine when a part he was working on exploded, causing shrapnel to strike his chest.",1
"An employee was working when they inhaled dust from a nearby construction site, resulting in illness.",1
"An employee was unloading trucks at a grain pit when their hand was injured in an auger. The employee's left ring finger was amputated, and the employee sustained injury to other fingers.",0
An employee was opening a rolling gate when its rollers caught his right hand. His index finger was partially amputated.,0
"An employee was leaving a client's home when they fell down the stairs, resulting in a fractured right tibia and right knee.",1
"An employee was operating an oven that manufactures thin wafers by applying batter to oven plates. Wafers began accumulating at the scraper and the employee opened the access door to remove the wafers. As his finger became hot from contacting the oven components, he pulled his hand away and his finger was caught between the scraper and the oven plate, resulting in a fingertip amputation.",0
"An employee became dizzy while walking around an elevator. The employee was hospitalized, having suffered a chemical exposure likely caused by leaking hydraulic fluid.",1
An employee was cutting chicken when his left thumb tip was amputated by the knife.,0
"An employee was assaulted by a resident while cleaning the resident's room. The employee suffered injuries including detached ears, eye injuries, and facial lacerations.",1
"An employee was supervising a railcar load line. He was latching a rail car when he was struck by the push bar he was using, resulting in a cracked rib.",1
"An employee was breaking down a portable traffic control device, an illuminated arrow board that folded in half vertically. As he was folding it, it fell quickly. His right little finger was caught in its hinge and the fingertip was amputated.",0
A metal reel was dropped off the production line and an employee's right little fingertip was crushed between the reel and the flange/arm. The employee sustained a distal amputation to their right little finger.,0
"On October 2, 2022, an employee was helping to check a switching cabinet and determined that it needed to be replaced. While the employee was talking to a crew member next to the switching cabinet, an arc flash occurred, causing a second-degree burn to her left arm and a burn to the side of her face. She was admitted to the hospital.",1
An employee was slicing meat in the kitchen when the slicer lacerated her finger. The employee then had a stroke and was hospitalized.,1
"An employee was opening the inspection port of a bottom ash system to identify the cause of a clog when hot water came out of the port, burning the employee. The employee sustained second-degree burns to their back, side, neck, and arm.",1
"An employee was using a cutting torch to separate a railcar coupler/knuckle. The railcar coupler broke free and struck the employee, resulting in a broken femur.",1
"On October 2, 2022, an employee was attempting to unjam a pallet on a rack system and fell approximately 17 feet to the concrete floor. They were hospitalized with a broken left leg and a pelvic fracture.",1
"On October 3, 2022, an employee was picking up a tractor. He moved it up to an empty parking spot. He then went to park his personal vehicle in the original position of the tractor. When the employee was in his personal vehicle, he realized that the tractor was rolling. He got out of his vehicle and was pinned between the two vehicles, resulting in a broken pelvis and hospitalization.",1
"An employee was trying to reverse direction on a three-phase electric motor in a grain elevator. As the employee was switching the electrical wires back to their original locations, the third power leg was knocked loose and grounded. The resulting arc flash from the electrical box burned the employee's forearms.",1
"An employee was walking to the breakroom when she tripped and fell to the floor, resulting in a broken right elbow.",1
"An employee was unloading a truck when a package inside the truck fell, causing the door to close. The employee walked into the door latch and lock, striking their head. The employee was hospitalized with a head injury.",1
An employee was cutting a piece of lumber with a radial arm saw. The saw kicked back and its blade caused an amputation to a finger on the employee's left hand.,0
"An employee was hanging light stringers in an air duct. The employee fell down an air duct, landing about 4 feet below and injuring his arm. He was hospitalized.",1
An employee was moving 4-inch square tubing from a pallet to a four-post rack when his right ring finger was caught between the end of a tube and the rack. The employee's finger was partially amputated.,0
"An employee was climbing down an extension ladder when it broke. The employee fell 8 feet and suffered broken ribs, a punctured lung, and a dislocated finger.",1
"On October 3, 2022, an employee had disassembled an air compressor, then started the compressor to look for oil leaks. The rag they were using to wipe oil was caught in the air compressor's rotating fan blade, resulting in fractures and lacerations to the employee's right hand.",1
"An employee was filling a water tank with high-pressure equipment. Pressure from the water pushed him off the truck; he landed on the ground on his back, suffering a back injury.",1
"An employee was exiting the hopper of a cement mixer. The mixer was activated and its blade caught his left foot, amputating it.",0
"An employee was calibrating a mixer. Two chemicals (a furan no-bake resin and an acid catalyst) were mixed in a bucket, reacted, and splashed onto the employee's face and down his arms. The employee suffered chemical burns to the face and arms. Personal protective equipment was not being worn at the time.",1
An employee was unfolding a wire cart holding equipment. His right ring finger was pinched by the cart and was partially amputated.,0
An employee had locked out a jammed bag-making machine to remove a spout from it. The machine released air pressure and clamped down on his right little finger. He suffered an amputation to the fingertip.,0
"On October 3, 2022, at around 5:00 PM, an employee-in-training was changing out a commercial paper roll on a corrugator inside the facility warehouse. Once the roll was installed on the roll stand and ready to be put into production, the employee went to clear the excess paper from the roll. His right index finger was caught between the clamp and prep bar, resulting in an amputation of the tip that was later reattached.",0
"Two employees were trenching in a fiber cable using a trenching and plowing machine. Employee 1 was cutting banding around the fiber cable; employee 2 was operating the machine and monitoring the cable as it was laid into ground. Employee 1 was crushed under the left track of the trenching machine, resulting in multiple fractures to their right leg and foot.",1
"An employee was using a forklift to unload equipment for a delivery truck and rigging the loads with chains. The employee's fingers were caught in the chains; their left middle finger was crushed, and their left ring finger was partially amputated.",1
"An employee was loading an extruder machine that made string for string trimmers. The line ran through the machine on rollers. It became tangled in the machine; while trying to untangle it, the employee suffered an amputation to the left ring finger at the last knuckle, as well as a lacerated left middle finger.",0
"An employee was stepping over a 26-inch-high containment wall. His foot caught on the wall and he fell, suffering a broken lower-back vertebra.",1
"On October 3, 2022, an employee was near a tire-building machine's robot ply strip hand, a suction unit that moves from side to side. The robot moved and struck the employee's nose, causing an avulsion. The machine was guarded at the time.",1
"An employee was constructing a wooden mushroom tray. He was installing a steel corner bracket to the assembled mushroom tray using an electric right angle drill when he sustained an injury to his left little finger, resulting in a partial amputation.",0
"The injured employee was inserting a rod into the expander machine in order to build a new coil. The injured employee asked employee 2 to operate the machine while they inserted the rod. While employee 2 was lowering the header guide, the injured employee was leaning against the back plate. The injured employee's hand was crushed between the header and back plate, resulting in a partial amputation to his left index and middle fingers.",0
An employee was talking to the operator of a loader. The loader hit an unmarked power line while digging at a depth of 2 feet. This caused a pop. The employee suffered a seizure.,1
"An employee was inspecting a roll of fabric in an accumulator. The fabric was moving to one side inside the accumulator, so the employee stopped the machine and moved the fabric back to the correct position. The employee restarted the machine and while exiting the machine became caught in it, resulting in a left arm amputation.",0
"On October 3, 2022, an employee was cleaning the rotating drum on a slitting machine. The employee's hand contacted the in-running nip point, resulting in a degloving injury and a fracture.",1
"An employee was raising a dredge screen. The employee's right thumb was caught between a handrail and a dredge box, and the thumb tip was amputated.",0
"An employee was reaching to pick up a dog when it bit the employee's left index finger. The finger became swollen and infected, and the employee was hospitalized the next morning.",1
"An employee was working on a 6-foot step ladder to install a bolt through a hinge on a compressor door. The employee's left leg was caught in the leg of the ladder and he fell down onto the ladder, resulting in a compound fracture to his lower left leg.",1
"An employee was taking trash to the dumpster when she tripped over a pole and fell to the ground, resulting in a broken left hip.",1
"Two employees were conducting maintenance on a pipe that was leaking on the production floor. While repairing the broken line, a cap broke off, releasing 12 lbs. of steam into the room. While evacuating the room, an employee slipped and fell on water. He sustained a dislocated shoulder and burns to 20% of his body.",1
"An employee was exiting a room just as another employee was entering. The door swung inward toward the first employee; she lost her balance and fell to the floor, suffering a broken left hip.",1
An employee was ripping a trim board on a table saw when the board jerked and the blade amputated the employee's left thumb tip.,0
"On October 3, 2022, at approximately 12:30 p.m., an employee was using a backpack sprayer to spray the attic of a customer's home when he stepped off the decking and fell through the ceiling to the concrete floor. The employee was hospitalized with two fractured vertebrae.",1
"A lineman was working inside an underground residential distribution transformer. His hands touched an energized elbow probe, and the resulting arc flash shocked him and burned his face, hands, and legs.",1
An employee was cleaning a mechanical room floor with a gasoline-powered pressure washer. The water jet lacerated the employee's tongue.,1
An employee was making tablets using a tablet press machine when their left little finger was amputated at the second knuckle by the machine.,0
An employee was picking up store product that had been thrown to the floor. A shoplifter re-entered the store and stabbed the employee in the neck with a knife.,1
"An employee was pushing a dry bunker rack of restaurant supplies onto a delivery truck when a shelf came down and pinched the top of the employee's finger, resulting in an amputation.",0
"An employee was changing a load lock on a cylinder. The lock failed, leaked hydraulic fluid, popped out, and cut the employee's left hand. The employee was hospitalized.",1
An employee was cutting two-by-fours with an electric hand saw and cut four fingers on his left hand. The employee sustained lacerations on three of his fingers and cut tendons on his left ring finger.,1
An employee was reaching over the center line of a spindle on a metal spinning machine. The employee's glove was caught by a roller and his right hand was pulled into the machine. His middle and ring fingers were partially amputated.,0
"An employee tripped and fell on boxes in a hallway, falling to the ground and suffering a broken elbow.",1
"An employee was operating a forklift in a warehouse. When making a turn, he collided with a bollard pole. The employee was hospitalized with a laceration to his shin.",1
"An employee was getting a 15-pound film roll from a line. The employee's foot got caught in a strap attached to a pallet, and she fell to the floor and suffered a broken left hip. She was hospitalized.",1
"An employee was installing a two-by-four knee wall as part of a supported deck forming operation. The employee was wearing a personal fall arrest system (PFAS) consisting of a full-body harness and a retractable lanyard. As the employee was moving to install the knee wall, he reached the maximum cable length and the lanyard retracted, causing him to lose balance and fall. The employee fell approximately 6 feet, landing on top of a material bin that was staged on the level below. The employee sustained a fracture to his lower left leg.",1
Five employees were hooking up a bundle of pipe in a hatch in a marine vessel. One employee's gloved left hand was on the safety lifting strap and lifting hook of an overhead crane; it became entangled as the load was being lifted. His left index and middle fingers were amputated.,1
"Two employees were preparing to lift a trailer door in a docking area. They were adjusting a roller line, on which the door was resting. When one of them moved the line, the door fell on the other's arms and broke them.",1
An employee was moving a refrigerator up the stairs with a dolly. He fell back on the stairs and suffered a lower back injury.,1
An employee was working in the cabinet shop cutting cleats with a chop saw when his hand contacted the chop saw. The employee was hospitalized; he sustained a partial amputation to his right thumb.,0
An employee was using a screwdriver to cut open the plastic shrink wrap around a pallet of boxes. The screwdriver slipped and entered the employee's left eye.,1
"At 11:00 a.m. on October 4, 2022, an employee was setting up a camera at a football stadium. He fell off the camera platform and landed on a row of seating. He suffered four broken ribs and was hospitalized.",1
"An employee was operating a stand-up lift to place a pallet on a warehouse rack. When the employee turned to exit the aisle, their left foot was pinched between the lift and the racking upright. The employee's left first and fourth toes were crushed.",1
An employee was checking a fire hydrant with a wrench. The wrench slipped and the employee sustained a hip/leg fracture.,1
"An employee was operating a stand-up forklift and stepped off before the machine came to a stop. The forklift ran over the employee's left foot, resulting in contusions on their left leg and ankle and a partial amputation of their left big toe.",1
"An employee was operating a forklift down an aisle to return an empty hopper. The hopper shifted on the forks, causing the cable that connected the container and the forklift to snap. The employee's finger was struck by the metal cable and he sustained a partial amputation of the left middle finger.",1
"Employees were staging I-beam supports for new construction. As the forklift was lowering an I-beam, it shifted and struck an employee in the left foot and shin, causing an open fracture. The employee was hospitalized.",1
An employee's finger was amputated after coming into contact with moving parts on a magnetic drill press.,0
"A saw for logs jammed. An employee was helping clear the jam when the saw was activated, and the log loading system broke the employee's right arm.",1
An employee was making a residential delivery when he slipped and fell in the rear of the trailer. The employee was hospitalized with a fractured right hip.,1
"An employee tripped in a hallway and fell to the floor, suffering three broken ribs.",1
"An employee was attempting to install a manual quick coupler when his left middle finger was pinched in the coupler, resulting in a partial amputation.",1
"An employee was adjusting a sprocket and chain for a system that moved carts. As he adjusted the nut, the chain came loose and partially amputated his left ring fingertip.",0
"Two employees were on a two-point suspension scaffold outside a building, installing windows. One of them was holding a window on its jamb as it was slid into place to connect it to another. His right middle finger was caught between the two windows and amputated.",0
"An employee was on top of a haul truck trailer, taking tiedowns for a pumping unit's crank guard to be lifted with a crank. The employee fell approximately 5 feet off the trailer and landed on one foot, resulting in fractures to the tibia and fibula, which caused a muscle injury. The employee was hospitalized and had surgery.",1
"An employee was carrying two empty boxes when one of the boxes got caught on racking, causing the employee to lose balance and fall to the concrete floor. The employee was hospitalized with fractures to their ankle, that required surgery.",1
An employee was operating a band saw when he sustained a fingertip amputation.,0
"An employee was outside removing a handrail from a machine when the handrail fell on top of him, resulting in brain bleeding.",1
"An employee was lowering a trailer's landing gear so the trailer could be detached from the truck. The landing gear stopped lowering and would not move, even under higher tension applied using the low gear. An employee was looking under the trailer to find the problem when the crank spun back around under tension and struck his head. He suffered a scalp laceration and a neck injury.",1
"An employee was polishing a part on a lathe. His rag wrapped around his glove and pulled his right thumb under the spindle, where it was amputated. The thumb was reattached at the hospital.",1
An employee was installing solar panels on the roof of a new-construction two-story home. The employee slipped and fell approximately 14 feet off the roof to the swimming pool below. The employee struck the edge of the pool and sustained rib contusions that required hospitalization.,1
"At 4:15 p.m. on October 5, 2022, an employee was orienting a stack of wooden sticks on a conveyor feeding into an end matcher. His left little finger was crushed between a stick and an even bender, causing an avulsion to the skin of the finger. He was hospitalized and the fingertip was medically amputated.",1
"An employee entered a work truck from the rear. While getting into a seat, the employee fell out the passenger door. The employee landed on the ground and suffered rib and lung injuries.",1
"An employee was removing a stilt. A bolt on another stilt sheared off, causing the employee to fall to the ground about 4 feet below. He landed on his left side, suffering possible broken ribs and lung issues.",1
"An employee was repairing an air line in the ceiling. After completing this task, the employee tripped and fell 2 feet from the ladder to the floor. The employee sustained a fractured femur.",1
"An employee stepped down onto a stairway with seven risers, putting both of his hands on the rails. He fell onto his arms and slid down the stairway while still holding the rails. His left leg made contact with the concrete floor first, and his tibia and fibula were broken. He was hospitalized, requiring surgery.",1
"An employee was unloading boxes when they fell, hitting the employee on the head, neck, and back. The employee suffered a concussion.",1
"An employee was finishing concrete when he contacted a power line with a float pole, resulting in an electrical burn.",1
"An employee was getting laundry out of the bed of a truck. In stepping down, the employee suffered a broken left tibia.",1
An employee was loading a 45-foot pole onto a digger using a pole cradle to lift the rear of the pole when his left thumb was caught and broken. The employee was hospitalized and required surgery.,1
An employee was using a saw to cut a piece of polystyrene foam when the rotating portion of the saw pulled her glove into the saw. The employee sustained a one-eighth- to one-quarter-inch amputation to her right middle finger.,0
An employee fell while exiting a truck. The employee suffered a contusion to the back of the head where it struck the ground.,1
"On October 5, 2022, at approximately 8:15 a.m., an employee was on an elevated platform doing a routine inspection when he fell approximately six feet to the concrete floor, resulting in a fractured left leg.",1
"An employee was assisting an individual into the company services van. The individual struck her in the face, pulled her hair, and threw her to the ground. The employee was hospitalized for head, neck, and arm contusions.",1
"An employee was performing a welding operation. A die came down and caught the employee's right little finger, amputating the tip.",0
"On October 5, 2022, an employee was cutting chicken on a line. The knife cut his right little finger. He lost consciousness, fell, hit his head on the floor, and suffered a fractured skull. He was hospitalized.",1
"An employee was preparing to load windows from a cart onto a truck. When the employee unstrapped the windows, they fell on him, resulting in a back injury, which required surgery.",1
"A rigging crew was installing structural steel beams from a staging area. A crane had been used to stand a beam up; an employee was standing on one side of the beam helping others adjust the wire rope rigging. The beam became unstable, rolled toward the employee, and struck his legs, breaking each one between the knee and the ankle.",1
"An employee was standing on a framing piece of equipment (conveyor system) when he fell approximately 24 inches to the ground. The employee sustained a broken ankle, which required surgery.",1
"An employee was setting up a drill press. The press caught his hair, then caught his left glove as he reached to free the hair. The rotating drill tool amputated his ring and middle fingers just below the first knuckles.",0
"An employee was directing traffic at an intersection. After he asked a driver to stop, the driver got out of his vehicle and attacked the employee with a machete. The second swing of the blade struck the employee's hand, causing a laceration, broken bones, and tendon damage. The employee was hospitalized, requiring surgery.",1
An employee's finger was amputated by a cargo trailer pulley.,0
"An employee was servicing an outside rodent trap. A rattlesnake was inside the trap. It appeared to be dead; when he tried to remove it, it bit his right index finger.",1
"On October 5, 2022, an employee was removing a bolt from a magnet on a maintenance workbench. The magnet tipped over and fell onto his hand, crushing and causing an amputation to a finger.",1
"An employee was trying to remove a wire stuck in a machine. The machine's belt caught his clothing and pulled him toward a pinch point, where his right arm was broken.",1
"On October 5, 2022, at approximately 11:30 AM, an employee jumped off a semi-trailer from a height of approximately 4 feet. The employee impacted the ground, and was hospitalized with a broken bone in their right lower leg.",1
"Employees were preparing a main fractionator pump for blinding when the case
drain developed a leak. Butane and alkylate were released and the vapors reached an ignition source resulting in a fire. Two employees sustained burns to the upper chest and face. One employee was treated and released and one employee was hospitalized.",1
An employee was loading a railroad tie onto the lug chain of a trimmer. A board became stuck under the tie. The employee tried to roll the board loose; his finger rolled with it and was pinched between the tie and the lug chain. He suffered an amputation to the fingertip.,0
An employee was assessing storm damage inside a store. The employee suffered respiratory distress and was hospitalized.,1
"An employee was on top of a truck's reservoir tank, checking the amount of liquid fertilizer in the tank. He fell from the truck to the ground and suffered a neck fracture, a broken vertebra, five broken ribs, and three lacerations to the face.",1
"An employee was operating a powered industrial truck when his left foot struck a pole. The foot was injured, and three of the toes were amputated during surgery. This incident took place during a training activity.",1
An employee fell 30 feet from a residential roof to the ground. The employee's legs were broken.,1
An employee was troubleshooting an air valve to get it to close. The valve closed on the employee's left middle fingertip and amputated it.,0
"An employee was helping guide a forklift as it tipped a 2,190-pound steel coil upright. The coil started to tip over, and the employee's foot was caught under it. Her first, second, and third metatarsal bones were broken.",1
"An employee had been lowered down to a catwalk with a hoist. He was unhooking the hoist from the rotating head when it fell over. His left leg was pinned between the rotating head and a pipe retention post, resulting in swelling and inability to bear weight on his leg.",1
"An employee was feeding material into an automated heat shrink tube cutter. As the material became too short to cut, it got stuck at the exit point between the roller feeder and the blade. The employee was trying to free the stuck material when the machine cycled; its blade amputated the tip of his right index finger.",0
An employee stepped onto unsecured metal decking and fell 10 feet from the second floor to the first floor of a building. He suffered broken ribs and a bruised pelvis.,1
"A mechanic was troubleshooting a gear box for a pan line to a bread molder. He removed an air line to the gear box, lubricated the line, and put it back on. He then moved the chain and sprocket and the motor kicked on, causing an avulsion injury to his left thumb.",1
"An employee was descending a ladder. She dropped to the ground at the last step and broke her right ankle. She was hospitalized, requiring surgery.",1
An employee was cutting a plastic sign with a manual guillotine-type cutter. The blade partially amputated the employee's left thumb at the tip.,1
"Two employees were adjusting a 2-foot by 3-foot, 150-pound catch basin. They had removed the casting, which was sitting half on the road and half on a frame. The casting dropped and crushed the tip of an employee's finger against a brick being used to hold the casting in place. The fingertip was amputated.",0
"A crew was removing a white pine tree. A piece (about 16 feet long and 11 inches thick) had been cut from the tree and was being lowered to the ground when it struck a large rock, changed direction, and struck one of the employees, who was standing about 40-50 feet away from the base of the tree.",1
"An employee was polishing a flange face using a handheld air motor that turned a small shaft and a spinning aluminum plate. The shaft caught and wrapped up the employee's glove, causing amputations to three fingers on the employee's left hand.",1
"An employee was installing fiberglass decking on the upper level of a framework. The employee fell approximately 13 feet and struck the concrete surface below, suffering head and neck fractures. Fall protection was worn but was not tied off at the time.",1
An employee was operating a filler machine when their fingers were caught in a roller. The employee's right middle and ring fingers were amputated.,0
An employee was using a pry bar to free a portable lift that was stuck. The pry bar slipped and struck him in the head. The employee was knocked unconscious and sustained a cut to the forehead above the right eye.,1
An employee was pulling kegs out of a cooler with a forklift. The kegs fell toward the forklift and struck the employee's hand. The employee suffered fractures and a laceration.,1
"An employee jumped down from one level of a scaffold to another, about 18 inches below. The employee went through the plank and fell to the ground, suffering a broken pelvis.",1
A lineman was on a power pole holding a jumper wire. The wire contacted an energized primary line; the resulting arc flash caused first-degree burns to the lineman's face and second-degree burns to the lineman's right arm.,1
"A temporary employee was removing a gutter guard from the third floor of a business. The employee's self-retracting lifeline yanked them back, causing an impact that broke their right leg.",1
"An employee was cleaning a room. When she picked up a backpack and chairs, she developed pain in her lower right abdomen.",1
"An employee was prepping the pallet gate door for removal. While pulling the center drive piston from the door, the employee sustained an inguinal hernia.",1
"An employee was working on top of a screener. He fell backward off the screener, hitting his head and his left side.",1
"An employee was operating a stand-up reach truck and struck a pallet of material, crushing and fracturing his left leg. The employee was hospitalized.",1
"On October 6, 2022, an employee was conducting preventive maintenance on a v-belt conveyor when the adjacent conveyor started. That conveyor's roller caught a rag used for cleaning and pulled in the employee's left arm. His ulna and radius were both broken.",1
"An employee was guiding a motor into a container while a forklift was lowering it. The employee made contact with the motor, which amputated the top of his left thumb.",0
"An employee was troubleshooting a door when it activated and closed on the employee, who suffered an amputated right middle fingertip.",0
"An employee was fixing a leaking hose/pipe. The employee's fingers entered a pump, and the employee suffered a finger amputation caused by the pump's rotors.",1
"A solar installer tripped over a skylight on the roof and fell about 20 feet to the ground suffering a broken wrist, concussion, and a back injury.",1
An employee was working below the area of someone working in a scissor lift. A magnetic drill fell and landed on the employee. The employee was hospitalized with a fractured C7 vertebra.,1
An employee was operating equipment when she sustained a fractured hand.,1
"An employee was spreading the forks on a parked forklift when he was struck in the face by one of the forklift tines, resulting in a contusion.",1
"An employee suffered a hernia while lifting boxes of chicken. The employee was hospitalized, requiring surgery.",1
"An employee was leaving a building. She tripped on a curb and fell, striking her head and knees on the ground. She suffered a forehead laceration and bruising to the knees. The employee was hospitalized.",1
"An employee was opening the entry gate when the wind blew the gate closed. The employee went outside to open the gate and it fell on him, resulting in a broken leg, ankle, and rib, as well as a bruised lung.",1
"An employee was working on a ladder to assist a crane company in placing a shipping container onto a television set of a shipyard. The employee fell from the ladder to the ground below, resulting in contusions and a fractured leg.",1
"An employee was using a hydraulic press to make a polymer product. The employee needed to flip an 80-to-100-pound cylindrical mold end over end; as he was lifting it, it slipped and caught his finger against the bottom of the hydraulic press platform. The finger was crushed and required surgery.",1
"A pallet fell from a storage rack and struck an employee's pelvis, breaking it.",1
"A lineman was tied off at the top of a power pole, lowering a deactivated power line from the pole. The base of the pole broke and fell; the lineman fell approximately 40 feet, sustaining injuries to the hip and the side of his body. He was hospitalized.",1
"An employee was performing maintenance on a conveyor system that was not operational. There was another operational conveyor system nearby; the employee removed the safety covering from the operational pusher to help determine why the other pusher was not operating. The test switch was pressed and the pusher went over the employee's right thumb, resulting in a partial amputation. The thumb was later fully amputated.",0
"An employee slipped at the edge of a roof and fell to the ground about 7-8 feet below, suffering a head injury.",1
"A crew was tarping haystacks using a telehandler. An employee got onto the forks of the telehandler to be lifted up to the top of the haystack with the tarps. The employee attempted to hook the loops on the tarp to the hooks on the telehandler. The telehandler moved and caught the employee's arm, breaking and lacerating it. The employee was hospitalized, requiring surgery.",1
An employee was trying to remove a manhole cover on a wastewater pit. The cover slipped off a pry bar and caught the employee's finger against the edge of its recess. The employee's fingertip was amputated at the first knuckle.,0
"An employee was stepping down from a catwalk on a truck. He fell to the ground, suffering four broken ribs, a punctured left lung, and a broken left little finger.",1
An employee was removing empty dunnage from a work area after loading product. The employee's right ankle was caught and broken between an electric motor hand truck and a fixed step stool.,1
"An employee was wiping the sensor on a piece of equipment. The equipment activated and cut the employee, resulting in the amputation of their right index fingertip.",0
An employee was performing maintenance on an air conditioning unit. The unit's belt and pulley amputated 1 centimeter of his left middle finger and 5 millimeters of his left ring finger.,1
An employee was operating a riding mower. The employee's left hand became stuck between the mower's front left support bar and its reel. The employee suffered tendon damage to the middle three fingers.,1
"An employee was lifting a post shore off the floor. The post shore had been laid down extended, with the pin removed. When it was raised to a vertical position, its upper section fell. The employee's left middle finger was caught between its moving parts, which partially amputated his fingertip.",0
"An employee was near the chain for a wire draw machine, training another employee to operate the machine. The chain was activated and amputated the tip of the employee's left middle finger.",1
"An employee was closing an examination room door. The employee's finger was caught in the door jamb, causing the amputation of the employee's right middle fingertip.",0
"An employee tripped, fell to the floor, and suffered two broken arms.",1
"An employee was installing a roller to a truck. When descending the ladder, the employee lost their balance and fell to the floor, resulting in injuries to his wrist and forearm.",1
"An employee was driving down a dirt road in a utility task vehicle. A truck approached, and the employee braked and tried to get to the side of the road. The employee's vehicle skidded in the gravel, turned off the road, and struck a tree. The employee hit his head and suffered a concussion, as well as broken ribs and a punctured lung.",1
An employee was operating a chop saw when the employee's left hand became caught in the point of operation. The employee was hospitalized and underwent surgery and amputation of the left index finger.,1
"An employee was nailing a wood frame to a wall. The wood fell; as he tried to hold it, the nail gun fired a nail into his right knee.",1
"An employee was using a power washer, soap, and a broom to clean the top of a pneumatic cement trailer, which had a cylindrical shape. The employee was near the edge of the trailer when he fell approximately 8 or 9 feet to the ground with his legs in front of him, causing him to land sitting down. The employee suffered a dislocated right wrist and damage to his back vertebrae.",1
"An employee was walking from a pallet to a lift truck when he fell to the floor, breaking his right femur at the hip.",1
"An employee was speaking with guests at a theme park. She tripped over a guest's cooler while turning, fell to the concrete walkway, and suffered a chipped right kneecap.",1
An employee had just clocked out for the day and was leaving when she tripped on yellow floor tape. The employee's left leg was fractured.,1
"An employee was walking into a room when she tripped on a customer. She fell, suffered a broken hip, and was hospitalized.",1
"An employee was using a remote-operated overhead crane to move a suspended load of billets from the floor to the loading table of his grinder. After reaching the loading table, the employee used his right hand to guide the suspended load. The load shifted, crushing his hand between the chain on the crane and the load of metal bars. The employee's right ring fingertip was crushed, resulting in a partial amputation.",0
"On October 8, 2022, an employee was trying to change a belt on a conveyor when a steel roller malfunctioned and broke loose, lacerating his forehead.",1
"An employee was using a palm grinder to round edges on a metal sheet. The grinder blade caught his cut-resistant glove, pulled in his right thumb, and partially amputated it.",0
"At about 8:45 a.m. on October 8, 2022, an employee was clearing out a coal spreader when it crushed the employee's right index, middle, and ring fingers (without breaking bones).",1
"An employee was helping to change a pipe clamp on a machine. Power was applied to the machine, and a pneumatic cylinder clamp was jogged forward. The employee's finger was caught between two blocks propelled by the clamp, causing an amputation to the finger.",0
"An employee was descending a ladder. She fell from the ladder to the concrete floor, suffering broken vertebrae. She was hospitalized.",1
An employee was prepping food with a chef knife when the knife caused an amputation to his left thumb.,0
"An employee was using a bench shear to cut a piece of sheet metal. When the machine actuated, the sheet metal moved, and the employee sustained amputations to the left ring and middle fingertips.",0
"On October 10, 2022, an employee was walking near the front counter drink area when they fell after rolling their right ankle, resulting in a dislocated right knee and a fractured right ankle that required hospitalization.",1
"An employee was installing an irrigation system. As he pulled wires through a conduit, his elbow contacted the metal of a tool and the wires shocked him. He was hospitalized.",1
"While making an adjustment, an employee's left index fingertip was caught in a running chain and was amputated.",0
An employee fell through a skylight.,1
"An employee was lowering a car on a lift, but the locking mechanism was not releasing. He attempted to manually release the lift lock by using his finger. When the lock released, the weight of the car caused it to spring forward resulting in a partial fingertip amputation.",0
"An employee was carrying an LED light and a handheld vacuum while climbing a ladder. The employee fell approximately 10 to 13 feet to the surface below, resulting in a fractured skull and sinus cavity.",1
"A forklift was turning right when its back left side struck an employee, knocking her against a bin. Her pants were then caught on the counterweight of the forklift and she was dragged approximately 3 feet. The employee sustained a broken lower right leg.",1
An employee was jogging a loose belt on a machine. The machine's sprocket and belt caught the employee's right hand and lacerated the top of it. The employee was hospitalized.,1
An employee was using a 2500-psi to 3500-psi pressure washer to clean mud and sand out of a frac tank. The water sprayed the top of his shoe and punctured the shoe. The employee sustained the injection wound on their foot and was hospitalized.,1
A temporary employee was operating a drill press. They were drilling holes into a part when their cut-resistant gloves were caught in the drill bit. The employee's left ring finger was amputated at the first knuckle.,1
"An employee was offloading lumber when the load became stuck in a band. The employee attempted to cut the plastic band, which caused a 16-foot two-by-four to strike the left side of her face. The employee sustained broken teeth and a fracture to the left side of her face.",1
An employee was adjusting a floor jack under a 40-foot trailer. The trailer slid to one side and fell off the jack; the employee's right middle finger was crushed between trailer's lifting channel and the jack. The finger was amputated at the middle knuckle.,0
"An employee was using a chainsaw when the chainsaw kicked back, resulting in lacerations from the blade.",1
"An employee was using a ladder to load a railcar. While climbing down the ladder, the employee fell approximately 4 feet onto the floor of the railcar. The employee sustained fractured vertebrae in his lower back.",1
"An employee was guiding a hoisted load when the load slid when it was placed down, resulting in an amputation of the employee's left little finger.",0
"An employee was attempting to fix tooling on a catch trough. The employee's right ring finger was caught in the hinge of the trough lid, resulting in a fingertip amputation.",0
A forklift struck an employee in the leg as the employee was offloading a metal water tube. The employee's leg was broken.,1
"An employee fell off a commercial roof during re-roofing work. The employee landed on the ground, suffered injuries to both ankles, and was hospitalized.",1
"An employee was working at a dry dock, holding the safety latch of a crane hook open by lifting it while two other employees placed a lifting bridle on the crane hook. The hook was rotated to receive the bridle, causing the employee's right index fingertip to be caught between the hook latch and the crane block face/shell. He suffered an open fracture with partial amputation of the last joint of the finger.",0
"An employee was bringing tools to the side of a trench that had just been dug and was being benched. The side of the trench collapsed, and the employee fell about 12 feet into the trench. The employee suffered a dislocated hip and an injured pelvis and was hospitalized.",1
An employee was pulling a pallet of product toward the front of the pick location in a pick module. The pallet rolled forward and caught the employee's leg against the module.,1
"Two employees were cleaning up debris from around explosive storage magazines. They loaded wooden pallets, cardboard boxes, a ripped bag of ammonium nitrate-fuel oil (ANFO), and a hardened bag of ANFO into a box truck. They drove to the fire pit located in the parking lot and offloaded the debris and both ANFO bags into the fire pit. The fire was then lit. An explosion occurred, and the blast sent shrapnel outwards. Employee 1 was knocked down by the blast and suffered a puncture to the neck from a stone. Employee 2 was also knocked down. Employees in the nearby office trailer were knocked out of their chairs and some were thrown across the room. All employees suffered from temporary hearing loss and concussion symptoms. One employee was hospitalized and four others were injured but not hospitalized.",1
"At about 12:05 a.m. on October 10, 2022, a longshoreman was working as a ground-man for a marine terminal crane. A yard tractor struck him with its front left wheel, causing severe trauma to the leg as well as scrapes and cuts across his body and swelling to his head. He was hospitalized.",1
"An employee was removing a battery from a side loader. The battery cover came down and crushed the employee's left middle finger, causing an amputation from the back of the nailbed to the fingertip.",0
"An employee was placing a drywall cart on a truck. He slipped, and his right middle finger was pinched between the cart and the storage rack mounted under the bed of the truck. He suffered an avulsion of the nail and skin from the right middle finger.",1
An employee was standing on a truck when an overhead powerline broke and landed on the truck. The employee sustained an electrical shock.,1
"An employee was operating a rip saw to cut wood when the board kicked back, causing the employee to get a splinter in their left forearm.",1
An employee placed a 24-foot extension ladder on top of a stack of sheet rock. The sheet rock moved and broke under the weight of the employee. The employee suffered a fractured left leg.,1
"An employee was helping move a dock plate. As he grabbed the edge of the dock plate, it dropped to the truck deck and pinched his left middle finger, resulting in a fingertip amputation. The fingertip was surgically reattached.",0
"An employee was standing on a 24-inch-high concrete block when he fell backward, resulting in abdominal bruising.",1
An employee was delivering packages when they became dehydrated due to heat.,1
"At about 4:30 p.m. on October 11, 2022, an employee was in a parking lot helping a customer who was having difficulty with their vehicle's reverse gear. The vehicle rolled over the employee, who suffered fractures to vertebrae and the legs.",1
"An employee was transporting a trash hopper to a dumpster using a forklift. While  emptying the trash hopper into the dumpster, the employee's right hand was on the dumpster latch and his left hand was on the base of the hopper. When the employee released the latch, the hopper tilted forward while the rear of the hopper lifted upward, compressing the employee's left little finger between the hopper and the dumpster. The employee suffered a partial traumatic transphalangeal amputation.",0
"An employee was coming down a stairway. The stairs' guardrail detached and struck the employee, who suffered a shoulder injury and a broken skull. He was hospitalized.",1
"An employee was straightening a board at the infeed to an unscrambler at the planer mill. As the employee was trying to dislodge the skewed board, the weight shifted on another board, causing the employee's left little finger to become pinched between the two boards. The employee suffered a partial amputation.",0
"An employee was using his right hand to guide a load on a forklift. The load fell off and struck him, lacerating his right arm from the wrist to the elbow.",1
"On October 11, 2022, an employee was operating the winch of a tow truck to pull a semi-truck out of a ditch. Before the job was completed, the driver of the semi-truck began to drive away. The winch line was still attached to the semi-truck and amputated the employee's right thumb.",1
"An employee was operating a forklift to move a bale of yarn onto a waste scale. After aligning the yarn to the scale, the employee began to back the forklift out. The scale became caught on one of the forklift tines. The employee exited the forklift and attempted to move the yarn bale from the tine. As the bale began to shift, the employee positioned himself to provide resistance against the bale, resulting in a dislocation of the right knee.",1
"An employee was cleaning the windshield of a semi-truck when he slipped from the truck to the ground below, resulting in broken ribs and a collapsed lung.",1
"An employee was walking backward with a walkie-rider pallet jack when they tripped over another employee's walkie-rider pallet jack and fell. The employee's pallet jack partially ran over their right foot and leg, resulting in broken bones.",1
"An employee fell down a flight of stairs. The employee briefly lost consciousness and sustained lacerations and a broken C4 vertebra, nose, cheekbone, and orbital socket.",1
An employee was carrying tools and gauges while climbing up a roof access ladder. The employee fell approximately 14 to 15 feet from the ladder; his right leg was broken above the ankle.,1
A temporary employee was pushing wood through a doweling machine when her left index and little fingers were crushed in a clamp. The employee sustained a partial amputation of the little finger.,0
An employee was performing an alignment on a car and sustained a broken jaw.,1
"An employee was pulling a machine closer to the edge of a slab. As he stepped down off the slab, the form base gave out under his feet and he slipped, suffering a broken ankle requiring surgery.",1
"An employee was cleaning the wall behind the grill and fryer. While standing on the fryer, she slipped and her left foot entered the hot fryer grease. The employee sustained second-and third-degree burns to the foot.",1
"An employee was working from an 8-foot A-frame ladder, repositioning a Wi-Fi box attached to a drop ceiling. As he pulled a ceiling tile toward himself, he lost his balance and fell back off the ladder. He suffered fractures to the ribs and back.",1
"Two temporary employees were cleaning a warehouse aisle. One or two pallets fell from a stack of three onto both employees. One of them was pinned beneath the pallets, suffered an injury, and was hospitalized.",1
"An employee was operating an electric power jack. While turning a corner, the power jack struck aisle shelving and his left hand got pinched between the power jack and the shelving, resulting in a partial amputation of the left little finger.",0
"A cable caught some limbs and the top of a tree as it was being raised. A 2-inch-thick limb fell and struck an employee's head, causing a neck injury.",1
"An employee was operating a forklift on the mezzanine of a parking area to relocate pallets of materials. The top of the forklift struck an overhead beam, causing the employee's head to hit the steering wheel. The forklift then tipped over and pinned the employee's right leg underneath it. The employee suffered a laceration to the head and a right leg fracture.",1
An employee was clearing a jam in a noodle-cutting machine and suffered a laceration to the right hand.,1
"On October 11, 2022, at 10:48 PM, an employee was operating a runout table when a breakout occurred on one of the strands. The employee plugged and stopped the strand and began cutting the billet. When the billet was cut loose, it fell into the water. The billet contained liquid steel, causing a splash toward the employee after falling into the water. The employee was hospitalized for second-degree burns.",1
"An employee was descending a cell phone tower when their chest device stopped and the force broke the rope. The employee fell and struck the ice bridge of the tower, resulting in a broken left femur.",1
"An employee was spotting for a forklift that was carrying a concrete ballast. The forklift operator placed the ballast and the injured employee went to stop the ballast from swinging. His leg was pulled under the forklift tire, resulting in a broken foot, ankle, and lower leg.",1
"An employee was delivering groceries to a store. When he arrived, the employee opened the trailer door and noticed that the load in the truck had shifted. The employee began to loosen the straps on the boxes. As the straps came loose, the cardboard boxes fell and struck the employee in the head. The employee was hospitalized.",1
An employee was assisting in the setup and startup of an injection molding press. The employee was inserting the retaining pin of the hydraulic ram into the clevis when the ram was jogged. The employee's right index finger became pinched in the pin hole and the fingertip was amputated.,0
"An employee was working with a notching machine when the blade contacted their hand, resulting in a laceration. The employee was hospitalized.",1
"An employee was loading bags on a pallet. The employee's leg became caught in wrapping material and the employee fell to the ground, suffering a broken tibia.",1
"On October 11, 2022, an employee was walking when she tripped on a cart wheel and fell onto the floor, resulting in a broken left arm and left hip. The employee was hospitalized and required surgery.",1
"An employee was removing a sheet of aluminum that was strapped to the wall. As the employee loosened the strap, the panels shifted and one fell and struck him in the head. He was knocked to the ground and the remaining panels fell onto him. The employee sustained a laceration above the left eye and behind the right ear, abrasions on both knees, and a fractured pelvis.",1
"An employee was adding sugar to a kettle when the water boiled over, resulting in burns to the employee's legs and feet.",1
An employee was sitting in a skid steer when steam from a furnace entered the open window. The employee sustained burns from the steam and hot gas.,1
An employee was trying to unjam boxes on a pick belt conveyor in a warehouse. The conveyor amputated the employee's left ring and little fingers at the first knuckle.,1
"At about 1:15 p.m. on October 12, 2022, an employee was climbing a fixed ladder to disembark from a barge at a dock. He slipped and fell from the ladder to the deck of the barge about 5 to 7 feet below. His left leg was broken and he was hospitalized.",1
"At about 1:15 p.m. on October 12, 2022, an employee was removing potted plants from a conveyor. The conveyor's chain caught his glove and his right hand was pulled into the chain and sprocket, which amputated the tip of his little finger.",0
"An employee was on the rig floor standing on the off driller's side at the stump to help run pipe casing. As the next joint was being brought in, the employee's finger was caught between the stump and the projector on the joint. The employee's right ring finger was amputated.",1
"An employee was straddling a blender to clean it using a scrubber. The employee lost balance, fell into the blender and was caught by the augers. The injured employee suffered fractures to the skull, arms, and legs, lacerations to the head, neck, and body, and a dislocated shoulder. The right leg was surgically amputated.",1
"An employee was removing items from a semi tractor. He fell out of the truck, landing on the ground on his back and suffering back and head injuries.",1
An employee was making a path for a subfeed wire in an attic when he contacted a 120-volt live wire that was concealed underneath blown-in insulation. The employee experienced an electric shock and he was hospitalized for a heart arrhythmia.,1
A forklift operator was loading cargo into a trailer when the forklift drove off the dock. The employee sustained a back injury and was hospitalized.,1
A Postal Service employee was loading packages into a gurney when he fell. The employee was hospitalized with a fractured hip.,1
"On October 12, 2022, an employee had completed a day of work installing/ removing blinds and conducting pump maintenance. He developed symptoms of heat-related illness and was hospitalized for dehydration. Symptoms may have been exacerbated by chemical exposure (hydrocarbons) earlier in the day.",1
"An employee tripped on a chair in a hospital room and fell, dislocating her elbow.",1
"An employee was completing maintenance to adjust a plating barrel on a saddle. The employee reached over the drive shaft and their shirt became caught in the shaft. As the employee reached to dislodge their shirt, the employee's glove became caught in the drive shaft, causing amputation of the right ring and little fingers.",1
"A forklift hit an employee. The rack on its forks pinned him against a truck, and he suffered two broken ribs and a punctured lung.",1
"An employee was utilizing an automatic lift table stacking system. The employee manually lowered the lift table using the control panel to retrieve a broken wood board that was severed into two pieces. As the employee reached to retrieve a piece of wood, the lift table started to rise, causing the employee's right hand to become caught between the lift table and the system frame. The employee sustained a fracture to the right little finger and a laceration to the right hand.",1
"An employee was holding a 4-inch concrete hose in position to start placing concrete. The hose was connected to the pump truck. The pump operator started the pump to prime the last two sections of hose and on the third stroke, the pump cleared a clump of aggregate within the hose. This caused a significant kick that whipped the end of the hose and struck the employee on the right leg. The employee's lower right leg was fractured.",1
An employee was moving flat steel bar material with an overhead crane when the material got stuck. The employee attempted to maneuver the controls on the overhead crane; the material broke free and struck the employee on the left cheek. The employee sustained a fracture to their left cheek/jaw.,1
"Employees of Top Dog Industries were working on the catch basins for some pipes, extracting water to clean it. A 4-inch water pump had been running all day and ran out of gasoline. An employee was adding gasoline to the pump when the gasoline splashed on the motor and ignited. The employee sustained second degree burns to his left arm.",1
"An employee was on a flatbed trailer unloading bundles of PVC conduit. When the employee lifted a bundle to reposition it, the plastic strapping used to secure the bundle broke. The employee lost balance and fell to the ground. The employee sustained four rib fractures.",1
"An employee was mounting a leaf spring onto a tooling machine when the spring moved. The tension in the spring pulled the employee's left index and middle finger against the backstop of the tooling machine, resulting in amputation of the left index and middle fingers.",0
"An employee's left hand was caught and pulled into a conveyor system, resulting in broken bones. The employee was hospitalized.",1
"At 9:30 p.m. on October 12, 2022, an employee was standing on the front end of a piece of equipment, using a crowbar to align a shear pin hole. The crowbar slipped and he fell about 2 feet to the ground below, suffering injuries to the head and left shoulder.",1
"An employee entered the operating room to gather supplies for a case in another room. The employee tripped over an x-ray stand and fell to the floor, resulting in a fracture to their right arm.",1
"An employee was working on the top of a cooler ceiling. After cutting an opening in a 4-inch-thick insulated metal panel so that stairs could be installed, the employee fell through the opening, landed on the ground, and suffered a dislocated hip.",1
"An employee was on a ladder, cutting wires in a furnace to perform testing. Residual gas in the furnace ignited and burned both the employee's arms.",1
"An employee was descending a fixed permanent caged ladder from a roof. The employee fell from the ladder, landing on the ground 12 feet below and suffering a broken right femur, left ankle, and right wrist.",1
"An employee was cruising timber when he tripped on a rock and fell, suffering a broken leg.",1
"An employee was shrink-wrapping a pallet of freight. The employee tripped over the forks of a nearby pallet jack, fell to the floor, and suffered a broken right ankle.",1
"An employee was helping to unload rebar from a flatbed truck. The 6,000-pound bundles fell off the fork attachment of the front-end loader and fell onto the employee's feet and ankles, resulting in a broken ankle and crushed feet.",1
"An employee was unloading items from a truck bed in a stockyard. He stopped and leaned over to tie his boot laces, and his head struck the lower guard rail on a portable set of stairs for an office trailer. He suffered a contusion, lacerations to the face, and a laceration to the right eye and lower eyelid resulting in possible retinal damage. The injuries required surgery.",1
"An employee was on a scissor lift performing maintenance on a crane. A nearby crane from an adjacent bay struck the scissor lift, causing the scissor lift to fall over with the employee on it. The employee fell approximately 15 feet and was hospitalized for a fractured ankle and head laceration.",1
"An employee was assisting with a surgery in the operating room when an antiseptic solution was administered to the patient for surgical preparation. The antiseptic solution splashed the employee, landing on both arms. The employee began to itch and developed hives; she was hospitalized for anaphylaxis.",1
"The injured employee was walking backward and pulling a cart full of merchandise while a co-worker was pushing. The injured employee's hand was pinched between the cart and a pole, resulting in amputation of their right middle finger.",0
"An employee was unloading a truck with a forklift. The employee noticed a damaged case of product and dismounted the forklift, which then moved forward and struck his right leg with one of its forks. He suffered a torn Achilles tendon.",1
A grocery store employee was operating a motorized pallet jack when they collided with a nearby wall. The employee sustained a laceration to his leg and was hospitalized.,1
An employee was working in a forge shop. He was pulling a steel bar out of a forge when it hit the corner of a die. A fragment came off of the bar and punctured the employee's abdomen.,1
"An employee was performing electrical maintenance on a breaker switch. While the employee was wiping dust off the breaker, the breaker powered on and the employee was shocked. The employee was hospitalized with third-degree burns to his hands and torso.",1
"Excess molten iron was moved to a pig drain pond. When some of the iron had cooled, a forklift was used to break up and move iron that had overflowed from the pond. Some molten iron melted a hydraulic line on the forklift, causing pressurized hydraulic fluid to spray out. The fluid was then ignited by the molten iron, resulting in a fireball that burned the hands and face of an employee who was standing on the melt deck about 14 feet away from the forklift. The injured employee was hospitalized.",1
"On October 13, 2022, an employee was walking to her office through an atrium when she slipped on a puddle on the floor and fell, resulting in a fractured left kneecap and leg bruising.",1
An employee was standing behind a pump truck when a blowout occurred. A piece of metal was projected from the pump truck and stuck the employee's left shin. He was hospitalized with a fractured shin.,1
"On October 13, 2022, an employee was getting down from a dumpster after looking into it from over the side. His ring caught on a metal spur on the container and the ring finger was amputated. He was hospitalized.",1
"On October 13, 2022, at approximately 10:45 a.m., an employee was connecting two sections of a power pole when the pole struck the employee's left foot, resulting in a fractured toe and a laceration. The employee was hospitalized.",1
"An employee was refueling an external diesel tank while standing on the tank's platform. After becoming unbalanced by a gust of wind, the employee fell from the tank to the ground, resulting in a muscle injury.",1
"An employee was walking through a water test area when she fell, resulting in a fractured hip.",1
"An employee plugged in the cord to an electric fan at the start of their shift. During their shift, the employee took a step backward, causing them to trip over the cord of the fan and fall onto the floor. The employee sustained fractures to both the pelvis and femur.",1
"An employee was correcting film feed on a form, fill, and seal machine when the tip of her right middle finger was amputated.",0
"An employee was unloading a trailer from a platform that was 20 inches above the ground. The employee fell off the platform to the ground, resulting in a right hip fracture.",1
An employee was placing a brick under a steel plate to make room for a shear with a fork attachment to lift the plate and place it onto a truck skid. The weight of other stacked steel plates caused the plate to fall and crush the employee's right index finger. The employee suffered an amputation to the finger.,0
An employee was descending a ladder from a mezzanine when they fell 10 feet to the ground. The ladder slipped and fell onto the employee's right hip and back. The employee suffered a fractured L3 vertebra.,1
"An employee was performing maintenance on a cup production line. The employee was removing a defective cup when the bottom mold and the top mold closed, burning and lacerating the employee's right hand.",1
"An employee was cleaning a pugmill machine. The employee moved the machine belt with a 2-inch wrench when the belt caught his left sleeve and pulled his left arm into the belt, resulting in amputation of the arm.",1
"An employee attempted to hook a single-axle trailer to a truck hitch when their face was struck by the trailer coupler, resulting in a facial fracture to the right side of their jaw.",1
"An employee was starting a yard truck by touching a screwdriver to the solenoid. When the yard truck started, it lunged forward causing the employee to fall off to the side. The wheels of the yard truck ran over the employee resulting in fractures to the ribs, a vertebra, and a toe.",1
"An employee slipped while walking out of an office, fell, and landed on her knee. Her kneecap was injured.",1
"On October 14, 2022, an employee was working to unstick the leveler of a dock lift using his hands and a crowbar when the dock lift slammed downward and contacted the employee's thumb, resulting in a partial amputation.",0
"An employee was cleaning a hammer mill. It caught the employee's finger, causing an amputation to it.",0
"An employee was cleaning a vehicle when their left thigh struck the corner of a stone column, resulting in swelling that required hospitalization and surgery.",1
"On October 14, 2022, an employee was installing siding from an extension ladder leaned against a home. The employee fell from the ladder, landed on the ground about 7 or 8 feet below, and suffered a broken ankle.",1
"An employee was stepping around a vacuum mold. She stepped on a metal connector at the end of the vacuum airline nozzle, and her leg slid out from under her. She fell backward to the concrete floor, suffering a non-displaced fracture to the right hip.",1
"An employee was preparing for breakfast when she slipped on standing water on the floor and fell, resulting in an injury to her right knee.",1
"An employee was climbing a ladder on the side of a trailer. He slipped and fell to the cement floor, striking his head and sustaining head injuries.",1
"An employee was repairing an air line leak near a wastewater treatment tank when he contacted a damaged sulfuric acid line, which sprayed his arms and torso. The employee was hospitalized with chemical burns to his arms and torso.",1
"An employee was descending a ladder from a sawhorse platform when the hammer on his toolbelt caught a ladder rung and threw him off balance. The employee fell approximately 3 feet, resulting in a broken left ankle.",1
"On October 14, 2022, an employee was struck by a reversing forklift while walking across the yard. The employee suffered a broken lower right leg.",1
"An employee was using a punch press to punch a magnetic strip when the material jammed. When the employee attempted to unjam the press, their left index, middle and ring fingers were caught in the press. The employee sustained an amputation to the tip of their left middle finger and received stitches to their left middle, ring, and index fingers.",0
"An employee was performing collection duties when his fingers were pinched between a lifting cable and the side of a truck, resulting in an amputation.",0
"An employee was cutting a limb off the main trunk of a tree that had fallen during a hurricane. After cutting off the limb, the trunk stood back up and threw the employee approximately 8-10 feet. The employee struck his head on an adjacent tree, resulting in head trauma.",1
"At about 11:00 a.m. on October 14, 2022, an employee was using a blower to blow straw. The chain inside the drum of the blower struck the employee's hand, amputating part of the thumb.",0
"At about 11:00 a.m. on October 14, 2022, an employee was sweeping excess material around a mold shuttle trolley. The machine was restarted and struck her leg, knocking her down. She suffered fractures to the right lower leg requiring medical amputation.",0
"An employee was cutting a piece of metal on a machine. A sprocket and chain caught his left hand, amputating his middle, ring, and little fingers. He was hospitalized.",1
"An employee was holding a 3-inch pipe clamp while a co-worker pried the pipe clamp open. The clamp slid out and pinched the employee's right index finger, resulting in a fingertip amputation.",1
An employee was removing a die from a machine when his foot came off the brake. The die came down and crushed his right thumb.,1
"An employee was running low-voltage cables in a ceiling when he stepped on a light fixture. The light fixture gave way and the employee fell approximately 15 feet to the floor, resulting in a back injury.",1
"An employee got out of a car, lost his balance, fell to the concrete parking lot, and suffered a broken hip requiring surgery.",1
An employee was cutting meat with a bandsaw. The saw amputated the employee's finger.,1
"On October 15, 2022, an employee was using a tabletop press to squeeze part of a piston before brazing. The employee's left finger was pinched between the piston and the press, resulting in a partial amputation.",0
"An employee was standing on a 15-foot extension ladder while using a chainsaw to cut limbs off a tree. The employee fell from the ladder to the concrete ground, resulting in fractures to their upper body, back, and arm.",1
"An employee was standing on a ladder, tightening tarp tie-downs. The employee slipped on the third rung of the ladder and fell to the ground, landing on his right foot. The employee sustained a broken leg, broken wrist, and fractured back.",1
An employee was grabbing a pedestal fan. The employee's thumb went through the guarding and contacted the fan blade. The thumb tip was amputated.,0
"An employee was climbing an A-frame ladder to install an equipment curtain. The employee slipped from the ladder as he was climbing, causing him to fall approximately 4 feet to the ground, resulting in a fractured left wrist.",1
"An employee was inside a scissor lift when a wall panel fell from its bracing and struck the employee, resulting in a fractured pelvis.",1
"On October 15, 2022, two employees were examining a press extractor machine. While an employee was pointing to a loose bolt, a cylinder came down and amputated their left index fingertip.",1
"An employee was walking into work when she fell off a curb to the ground below, resulting in bruising and bleeding on her head and face. The employee was hospitalized.",1
An employee was slicing potatoes with a potato slicer. The slicer amputated the employee's fingertip.,0
"Two employees were putting a dock-leveler plate in place to load a 10-foot box truck with product. One end of the plate dropped onto an employee's left little finger, causing the amputation of the fingertip just above the fingernail line.",0
"An employee was a passenger in a utility task vehicle, which passed over a manhole cover hidden by grass. The employee was thrown from the vehicle's passenger seat to the ground, suffering a broken right arm.",1
"A crane was being used to remove a loader from a barge. An employee stood on the back of the loader as it was attached to the crane and lifted. The cable on the crane broke, causing the loader and the employee to fall about 13 feet to the floor of the barge. The employee suffered fractured ribs, a fractured back and collarbone, and a laceration on the back of the neck.",1
"An employee was installing an ice and water barrier on the roof of a building when a roll of the material struck his foot and caused him to fall, resulting in a broken fibula.",1
"An employee was adjusting a support jack on the back of a lugger truck. He placed his gloved hand by the edge of the opening as he pushed the jack to make it vertical. The top of the jack swung back and caught the tip of his left middle finger, resulting in a fingertip amputation of approximately 1/4 inch.",0
"On October 17, 2022, an employee was using a rebar cutting machine to cut a piece of rebar. The jamming block, which holds the rebar in place during the cutting process, crushed the employee's left index finger and lacerated their left middle finger.",1
"On October 17, 2022, an employee was replacing a battery in a portable cooler, about 6 feet high by 3 feet wide by 3 feet deep. Another cooler of the same kind was being moved on a powered pallet jack. It fell off the pallet jack and struck the employee's lower left leg, breaking it.",1
"An employee was changing a roller film on a plate freezer. His left arm was caught in the machine, and the forearm was amputated.",0
"An employee was walking across the parking lot with a central vacuum system when their leather glove was caught in the air lock. The metal fan amputated the employee's right index, middle, and ring fingers.",1
"An employee was standing on a loading dock, loading wheat straw into the back of a pickup truck. He stepped onto the back of the truck and fell between the truck and the dock, resulting in four cracked ribs.",1
"An employee was operating a reach truck when the truck struck the corner of a pallet in a push-back rack, resulting in a puncture wound to the employee's left bicep.",1
"An employee was operating a three-wheeled forklift to hoist metal material with a sling system. While driving downhill in a gravel driveway, the front tire caught a root and the forklift lost momentum. This caused the hoisted material to sway and the forklift tipped forward. Inside the forklift, the employee struck against the dash and roof of the cage, sustaining a contusion to the forehead, abrasions to both legs, and later had a seizure.",1
"On October 17, 2022, at approximately 4:00 a.m., an employee was using a hand tool to clean beryllium chips from a lathe's ventilation system. The hand tool became caught on the rotating lathe and struck the employee. The employee sustained a left middle finger amputation at the first knuckle.",0
"On October 15, 2022, at approximately 5:57 p.m., an employee was hospitalized after she began feeling tightness in her chest and became short of breath at the end of her route.",1
"At 4:45 p.m. on October 17, 2022, an employee was installing shutters from the second-highest rung of an A-frame ladder. The ladder collapsed, and the employee fell about 5 feet. A window sill struck the base of the employee's skull during the fall, lacerating it. The employee was hospitalized.",1
"An employee was using a torch to cut a conveyor's legs loose so the conveyor could be moved. A leg pinned the employee against a handrail when it came free, and the employee suffered a fractured sternum and bruising to the chest.",1
An employee was waiting for a container to land on a coning platform. The employee's left index finger was caught in a space near a twist-lock mechanism and was partially amputated.,0
"On October 17, 2022, an employee was picking up melt shop supplies. The employee was tarping the load when the wind caught the tarp, causing them to fall from the flatbed trailer to the ground. The employee sustained a broken left leg, which required surgery.",1
An employee was working inside a tank farm to hook up a hose when he was stung by a honeybee and suffered an allergic reaction.,1
"On October 17, 2022, an employee was operating a press machine when his left hand was crushed, resulting in the amputation of three fingers.",1
An employee was removing staples from a piece of furniture. The employee's industrial staple remover slipped and punctured their left thumb. The wound became infected.,1
An employee was removing a bucket from a backhoe and installing a larger one. He was inserting pins to secure the bucket when the bucket shifted and his hand was caught between the pin and the apparatus that holds the pin in place. The employee's little finger and ring finger were partially amputated.,0
"On October 17, 2022, an employee was removing debris from a chain mechanism when the chain caught his glove and amputated his right little finger. The machine was guarded at the time.",0
An employee was attempting to move a pallet when he sustained a back injury.,1
"An employee was walking through the inventory room when they slipped on spilled water and fell to the floor, resulting in right knee and elbow fractures.",1
"An employee was removing two-by-four supports from a trench. He lost balance and while trying to avoid falling on top of conduits and other materials, fell into the trench. The employee sustained a broken right leg and fractured left heel.",1
"A home health care employee tripped on an outdoor lighting fixture and fell to the ground outside of a patient's residence, resulting in a concussion.",1
"An employee was using a hoist to lower a welder onto a shipping pallet. The employee was lining up the pallet bolt holes with the welder base. A co-worker lowered the welder with the hoist controller and the employee's right index finger got caught between the welder and the shipping pallet, causing the employee to pull her finger out of the pinch point. The employee sustained an amputation to the right index finger.",0
"An employee was cleaning a filler machine when the bucket of the machine started to fall. The employee reached to stop it from falling and the lance of the filler contacted their right index finger, resulting in a partial amputation.",0
"An employee was using a fusion machine to fuse pipes together. As he adjusted a pipe, it pinched his fingers, partially amputating the left index fingertip.",0
An employee was cutting material with a chop saw and amputated his left index finger and part of his middle finger.,0
"The injured employee was holding a container that was being cut by another employee. The chainsaw kicked back and struck the injured employee in the left leg below the knee, resulting in a laceration.",1
"An employee was adjusting an extendable axle on a combine harvester. The employee removed the pin that secures the axle assembly in place and the axle extended, causing an amputation of the left index fingertip.",0
An employee was cleaning up in a kitchen area. A piece of equipment fell onto the employee's right hand and crushed it.,1
"An employee was walking a jobsite, taking pictures. The employee slipped and fell to the ground, suffering a back injury. The employee was hospitalized.",1
"An employee was working on an effluent water treatment unit. The employee began to feel discomfort in the upper respiratory tract, eyes, and abdomen and was hospitalized, having suffered from possible sulfuric acid exposure.",1
"An employee was using an extension ladder to install pipe for a heating installation. The feet of the ladder slipped outward, causing the employee to fall to the floor. The employee sustained a fractured femur.",1
"A temporary employee was trying to get off a scaffold when he slipped and fell, landing on a piece of angle iron about 3 feet below. The employee suffered a broken hip and was hospitalized.",1
"On October 18, 2022, at approximately 4:45 p.m., an employee was attempting to retrieve a glass jar of product that had fallen between a transition point of two conveyors. The employee's right hand made contact with the conveyor belt, causing the skin on the top of their hand to be removed. The employee was hospitalized.",1
"An employee was using an electric saw to cut a 2-by-4 piece of wood. The saw cut the employee's thumb, resulting in the amputation of the tip.",0
"An employee was working under an auger that was being held up by jack stands. The jack stands slipped and the auger fell, which resulted in rib and lung injuries.",1
"An employee had just given a training talk to drivers on a loading dock. As she turned to walk away, a forklift ran over her foot, resulting in crushed toes. The employee was taken to the hospital, where she had surgery.",1
"On October 18, 2022, at approximately 7:30 AM, an employee was removing the mounting bolts from a juice extractor motor. Upon removing the last bolt, the motor released, catching their left thumb between the motor and the lifting jig. The employee sustained a broken thumb and laceration, resulting in hospitalization.",1
A maintenance employee was working on a structural line when his right middle finger was caught in the belt and belt pulley and the fingertip was amputated. The machine was not locked out at the time.,1
"On October 18, 2022, an employee was struck on the back by a falling wellhead. The employee was hospitalized for a back injury.",1
"An employee was standing in a semi-trailer helping a forklift operator deploy a self-leveling dock plate to prepare for loading and unloading. The driver started moving the semi-trailer and the employee fell off the back of the trailer onto the concrete dock and road surface, resulting in two broken ribs, a concussion, and a brain bleed.",1
An employee was using a box cutter and lacerated their left index finger. The employee was hospitalized.,1
An employee was climbing down from a truck when he fell and scraped his leg on a steel drum. The employee was hospitalized.,1
"On October 18, 2022, at approximately 9:00 a.m., an employee was unloading a trailer in a parking lot. As the employee positioned a cart full of product onto the lift gate of the trailer. The cart began rolling toward the employee causing them to jump to the ground. The cart then fell off the lift gate and landed on the employee resulting in a broken right femur. The employee was hospitalized and underwent surgery.",1
The injured employee was talking with another employee and raised her leg to show her boot to the other employee. The other employee grabbed the boot and lifted it up. The injured employee felt pain in her hip and fell to the ground resulting in a dislocated left hip.,1
"An employee was on a ladder performing maintenance on a light fixture when they sustained an electric shock. The employee fell off the ladder and sustained injuries to the head, neck, shoulder, and left leg.",1
An employee was performing maintenance on a rivet-making machine after a malfunction was reported. He sustained a fingertip amputation when his index finger was caught in a pinch point while performing the repairs.,0
An employee was lifting the hatch on top of the fuel tank on a fuel truck when the truck exploded. The employee sustained a femur fracture that required surgery as well as burns.,1
"An employee was pulling pasta out of a machine. The machine's arm caused a deep laceration between his right thumb and index finger, requiring surgery.",1
A boxcutter razor cut an artery in an employee's arm.,1
"An employee was operating a band saw to cut meat when their finger came in contact with the blade, resulting in an amputation.",0
"On October 18, 2022, at approximately 11:15 AM, an employee was working on a monorail system that transported metal to the furnace when a steel I-beam came loose and struck the employee. The employee sustained a broken left leg and ankle.",1
"An employee was retrieving bread dough from a dough rounder when their right middle finger was struck by a dough blade, resulting in a fingertip amputation.",0
"An employee was using a circular saw to cut plywood when the blade contacted his hand, resulting in a laceration.",1
"A food preparation employee was loading a dishwasher when they  slipped and fell to the floor, resulting in a fracture to their right humerus.",1
An employee developed nausea and dizziness after being exposed to a substance in a restroom. The employee was hospitalized.,1
"On October 18, 2022, an employee was working on a machine. The machine began to operate and pinned the employee to one side, resulting in an injury to the left eye.",1
"An employee was retrieving air filters from the maintenance shop. As he turned a corner, he fell to the floor, resulting in a broken right leg.",1
"An employee was descending a 6-foot ladder when they twisted their right knee. The employee sustained a torn anterior cruciate ligament (ACL), which required surgery.",1
An employee had just finished installing foam insulation on a foundation wall. He was climbing out of the foundation area and placed one leg on top of the 3-foot foundation wall when his other foot (still on the ground) slipped on stones causing him to fall backward to the ground. He was hospitalized with a broken L2 vertebra.,1
An employee was assisting a customer with a package pickup and took the staircase to reach the ground level. The employee missed a step as he descended down the stairs and sustained a concussion and laceration.,1
"An employee was operating a cheese curd auger and was attempting to clear cheese from the chute when his right ring finger was caught by the auger, causing a partial amputation of the distal portion of the finger.",0
A veterinary employee was intubating a dog when its mouth clamped down on her hand.,1
"An employee was assembling orders while driving a forklift. While she was placing parts on a pallet, she turned around and fell backward and horizontally approximately 6 feet and struck her head on the lower level of the shelving rack. The employee sustained a fractured elbow, lacerations to the head, and brain bleeding.",1
"An employee was working in bucket truck with a helicopter that had a suspended load. The load struck the employee and he was hospitalized with a broken arm, which required surgery.",1
"An employee was moving and stacking steel in the yard when he slipped or tripped and fell backward, striking a stack of metal beams that had a sharp edge and resulting in a laceration to the right calf.",1
"An employee was using a 24' extension ladder that was extended approximately 18' to hang a gutter on a wet deck. The ladder gave out, causing it to slide. The employee fell approximately 14' from the ladder to the ground. The employee sustained an ankle fracture and was hospitalized.",1
An employee was bringing in a horse from the pasture when they were kicked by the horse. The employee was hospitalized with a broken nose and a sprained wrist.,1
"An employee was using a brush pole to clean the eaves at a residence and to apply pesticides. The employee's pole came in contact with the electrical lines, causing the employee to receive an electric shock. The employee lost consciousness and was hospitalized.",1
"An employee was operating a metal tube tapering machine when his right hand was crushed, resulting in fractures.",1
An employee was exiting the building when they fell to the floor and landed on their face and shoulder. The employee was taken to the hospital for shoulder surgery.,1
"An employee tripped on a machine base and fell to the ground, suffering an eye injury.",1
"On October 19, 2022, an employee was using a pneumatic orbital sander on a vehicle. The sander lacerated his wrist and he was hospitalized.",1
"At 3:30 p.m. on October 19, 2022, an employee was inflating a car tire that was on a dolly. As the tire was inflated, it exploded; a piece of metal struck and lacerated the employee's left hand.",1
"An employee was moving product inside a gondola railcar with a walk-behind skid loader. The employee's left thumb was crushed between the loader and the railcar wall; the employee was hospitalized, and the thumb was medically amputated.",1
An employee was operating a pallet jack. His hip hit a storage rack and he fell to the floor. He suffered a broken pelvis and tailbone and was hospitalized.,1
"An employee was working on a 2-foot-high grated platform, replacing a wire in a clutch assembly on the scanner. The employee fell off the platform and landed on his side on a threaded rod sticking out of the concrete that is used to secure the scanner into place. The rod contacted his chest area, resulting in four broken ribs and a partially punctured lung.",1
"An employee was struck by a tug driven by an employee-in-training. The employee sustained injuries to their left arm, left shoulder, and lower back.",1
"An employee was dismounting a step stool when he fell to the ground, resulting in a knee fracture.",1
"An employee was moving an auto-scrubber into a storage room, holding the door open with one hand. The employee was pinned between the door frame and the auto-scrubber, which ran over her left foot, causing her to let go of the machine and fall. The machine then stopped on her foot as she was falling. She suffered a broken left ankle and was hospitalized.",1
"An employee, who had been on the dock unloading trailers, sustained a heart attack.",1
"A home health care employee was at a client's house to provide meal preparation and housekeeping help. The client's son stabbed the employee, who was hospitalized.",1
"An employee was unloading delivery materials from the back of a truck. The bolt holding the trailer ramp in place came loose, causing the employee to fall from the ramp to the ground. The employee suffered a broken collarbone and a skull fracture, with some bleeding to the brain.",1
"An employee was moving a basket full of product that was suspended on a hook. The basket unhooked and fell on his right hand, resulting in amputations to the employee's right thumb and index fingers.",1
"An employee was delivering in-person support for patient monitor installation at a hospital. While in the hallway, the employee encountered a hospital employee walking a patient's emotional support dog. The dog bit the employee's left hand, and the employee was hospitalized for infection.",1
An employee was cleaning a densifier when his left middle finger became caught between the densifier auger and sieve cage. The employee's left middle fingertip was amputated past the nail bed.,1
"An employee was cycling the packer on a rear-loading garbage truck. While his left hand was on the back of the truck, near the packer, the fingers were caught and broken between the packer's blade and the truck body.",1
"An employee was cleaning out a trailer on the side of the highway when he fell out of the trailer to the ground, resulting in a fractured left hip.",1
"An employee was utilizing a torch to repair a piece of equipment. The hose of the torch failed, causing the employee to sustain second-degree burns to the torso.",1
An employee fell into a 5-foot-deep trench.,1
"A temporary employee was utilizing a sand mixer when the machine became plugged up. The employee was clearing the jam, when the mixer moved causing amputation of the right ring fingertip and fractures and lacerations to the right middle finger.",0
An employee felt chest pains while delivering mail and was hospitalized.,1
"An employee was preparing to serve food to students. The employee tripped on a cord, fell to the floor, and suffered two fractures to the right leg. She was hospitalized, requiring surgery.",1
"On October 20, 2022, an employee was moving a large vertical scaffold part when they tripped over two wooden boards and fell to the ground. The employee's ankle was twisted resulting in a fracture to their lower leg.",1
An employee suffered a broken leg while moving scaffolding into a storage rack.,1
"On October 21, 2022, an employee was loading freight into a truck after two shipments had already been loaded into the trailer. The employee adjusted the height of the deck bars with the palletized skid on top. The deck bar fell, causing the skid to fall and land on the employee and knock him to the ground. He sustained a nose fracture and was hospitalized.",1
"An employee was operating a tube rolling system when their glove was caught in the tube expander, resulting in dislocated and fractured fingers.",1
"A forklift operator was loading a forklift onto a semi-trailer truck when the semi-trailer began moving. The forklift fell between the trailer and the loading dock, causing the employee to strike his head on the dock plate and sustain a concussion.",1
"An employee was replacing fuses in a bus duct disconnect switch in preparation to return an overhead crane to service. When inserting the B phase fuse, an arc flash occurred. The employee sustained second-degree electrical burns to the face and right arm and was hospitalized.",1
An employee was working with a wood chipper when its blade caught the employee's glove. The employee suffered a fingertip amputation.,0
"Employees were moving a road barrier. As the barrier was lowered, it crushed the employee's left big toe and two smaller toes.",1
"A car wash employee was preparing a vehicle for a wash when a second vehicle pulled behind it and accelerated, striking the vehicle in front. The employee's left leg was struck, resulting in left lower leg and ankle fractures.",1
"An employee jumped over a patio rail. When he landed, his feet went out from under him and he fell to the ground, suffering a broken right hip and right elbow.",1
"The employee was lashing containers when a lashing rod began to fall. The employee attempted to catch the falling rod, causing the employee's left ring finger to be crushed between the falling lashing rod and a rod on the ground, resulting in a fingertip amputation.",0
"An employee was stepping from a gravel parking lot onto a cement-paved sidewalk. She tripped and fell, suffering a concussion, a broken nose, and injured vertebrae. She was hospitalized.",1
"An employee was traveling down a warehouse aisle on an electric pallet jack. While the pallet jack was making a U-turn, its handle struck the warehouse racking. The employee 's right ring finger was pinched and amputated between the handle and the racking. The finger was surgically reattached.",0
"An employee was exiting a farm tractor when he fell, resulting in a fractured right leg.",1
An employee had finished unloading materials from a truck onto a five-foot-high loading dock. The truck started to pull away. The employee stepped backward and fell off the loading dock onto the floor. He landed on his left side and was hospitalized with six fractured ribs.,1
"An employee was removing a metal frame from an interior window on the second floor of a building. The employee fell to the ground level, suffering a broken pelvis.",1
"On October 20, 2022, an employee was unloading a jumping jack compactor from the end of a trailer, which was approximately 18 inches high. The employee slipped on loose gravel and fell. The compactor fell off the trailer and landed on his right hand, crushing his right middle and ring fingertips. The employee was taken to the hospital, where the injured fingertips were amputated.",1
"An employee was dumping peanuts into a compost area using forklift and a hopper. The hopper caught the employee's right hand, causing an amputation to the middle fingertip.",1
"An employee was using a table saw to cut a two-by-four when part of their left hand was cut, resulting in a fracture to the left hand.",1
An employee was using an oxyacetylene torch to cut a beam that was being held up on forklift forks. The beam fell and struck his leg.,1
"An employee was walking to deliver a part when they tripped over the base of a whiteboard and fell to the concrete floor, resulting in a broken hip.",1
"An employee was under the platform of a reach truck, servicing the truck with a wrench. The truck lowered and struck the employee, who suffered a broken pelvis and lacerated forehead.",1
An employee was removing the wires on bales of hardwood pulp when a bale fell onto the employee. The employee sustained crush injuries to the lower extremities including the pelvis as well as a displaced pelvis and a displaced lumbar vertebra.,1
An employee was splicing a wire with a utility knife and lacerated their wrist.,1
"An employee's finger became caught in a dump truck hoist, resulting in an amputation.",1
"An employee was installing a bucket cover when they slipped and fell, resulting in fractures to their right leg and ankle.",1
An employee was slicing meat on a slicer machine. The machine amputated the tip of the employee's left thumb.,0
An employee was flagging traffic in a construction zone when he was struck by a pickup truck. The employee sustained two broken teeth and lacerations to his face and right leg. He had surgery on his right leg.,1
An employee was cleaning a floor when a forklift struck his left leg with a pallet it was carrying. The employee was injured.,1
"An employee was helping to unload a truck at a gas station. The employee was walking on the back of the truck when their right knee popped, causing them to fall 5 to 6 feet to the concrete below, landing on their back and left elbow. The employee was hospitalized with torn ligaments in their right knee and a fractured kneecap.",1
"An employee was cutting bands away from wood stacks. The employee tripped on the bands and fell to the floor, suffering a broken hip.",1
An employee had just changed a heating/ventilation/air conditioning filter when he fell through a drop ceiling to the floor below. He suffered a broken left leg.,1
An employee was measuring the voltage of an electrical transformer following a new installation when an arc flash occurred. The employee sustained burns to both right and left hands and fingers.,1
"An employee was helping load a patient into a van. The patient's powered wheelchair lost power, rolled backward down the ramp, and pinned the employee, who suffered several broken ribs.",1
"An employee was driving a tractor to create a burn line. The tractor stalled. The employee was forced to flee through a burning field and suffered burns to his hands, arms, knees, legs, and face (about 27 percent burns overall). He was hospitalized.",1
An employee was unloading books from a binder machine and suffered a cardiac event requiring surgery.,1
An employee was acting as a spotter as a tap changer was lowered. The equipment shifted off of the forks and struck the employee. They sustained a right lower leg fracture and laceration on their right side.,1
"An employee stood up to get a piece of paper, slipped, and fell to the floor, suffering a broken left leg and left femur.",1
An employee was using a grinding machine to grind a metal bar. The part he was grinding flew out of the machine and the employee's right thumb was pulled into the grinder. The employee was hospitalized; his right thumb was later amputated.,0
"At about 3:30 p.m. on October 21, 2022, an employee was found unconscious on a gravel driveway, bleeding from the back of the head due to an injury caused by a rock.",1
"An employee was trying to clear a spent sulfuric acid line. As he tried to remove a flange on the line, there was a sudden pressure release and acid sprayed onto his face and neck; he then tripped and fell. He suffered chemical burns to the face and neck and a broken ankle/lower leg.",1
"An employee was using a wrench to torque a bolt on a flange when the wrench slipped, causing his right middle finger to become pinned and amputated at the fingertip.",0
"A veterinary employee developed a swelling in the left wrist, caused by an animal-borne bacterial infection.",1
"An employee slipped in mud while carrying gear, fell down an embankment, and suffered a back fracture.",1
"At 5:12 a.m. on October 21, 2022, an employee was working with a part revolution press to make drawer re-enforcements. The machine cycled and the ram came down on the employee's hands, crushing and amputating four fingers on each hand.",1
"An employee was using an impact gun to remove a nut from a pneumatic cylinder during the disassembly of a test cell. When the gun made contact with the nut, residual pneumatic pressure caused the cylinder to release. The employee's left hand was pinned between a rod end of the cylinder and the rod end plate. The employee was hospitalized and had surgery for a hematoma.",1
"An employee fell from an 8-foot A-frame ladder, landing on the ground about 6 feet below and suffering a broken hip and femur.",1
"An employee suffered an amputation to the right little finger, caused by a utility truck's tailgate.",0
"An employee was adjusting a dock plate. The employee fell from the dock plate to the concrete at least 4 feet below, suffering a broken elbow. The employee was hospitalized.",1
"An employee was helping a saw operator cut scrap aluminum by pushing aluminum profiles along a roller table into a saw. Starting the saw also activated a clamp to hold the material to be cut; the clamp forced the material down onto the employee's hand, which was pinned between the material and the table. He suffered a partial amputation to the left ring fingertip.",0
"An employee was helping unload a trailer. A vehicle hooked up to the trailer, which caused a patio window inside the trailer to fall over and strike the employee's head, left shoulder, and left arm. The employee was hospitalized requiring surgery for the forearm fracture.",1
"An employee was directing traffic at a workplace entrance. A truck struck the employee as it backed up, breaking the employee's leg.",1
"Two employees were feeding tree parts into a chipper with a winch attached. The injured employee grabbed the winch rope and it was pulled quickly above the chipper infeed chute, catching the employee's hand between the winch rope and protective cover opening over the rope and pulleys. They sustained a crushing injury and amputation to the right index finger above the second knuckle.",1
An employee was on a roof aligning metal tubing on trusses. The employee fell from the roof to the sidewalk more than 30 feet below and was hospitalized.,1
An employee was disposing of boxes of expired product in the dumpster when they lost balance and fell into the gap between the dock and the dumpster. The employee sustained a fracture to the left ankle.,1
"An employee was spraying adhesive on sheet foam insulation. The employee tripped, fell to the floor, and suffered a broken hip.",1
An employee was cutting 4-inch metal bar pucks with a bandsaw. A piece became wedged behind the sawblade. The employee was clearing it when the blade caught his glove and pulled in his right index finger. He suffered a fingertip amputation without bone loss.,0
"An employee was doing heating/ventilation/air conditioning demolition work from a ladder. A swinging duct struck the ladder, causing the employee to fall to the floor about 5 feet below and suffer injuries to the left side of the body and face.",1
An employee was walking to his car at the end of his shift when he fell down the stairs in the parking lot. The employee sustained a neck injury.,1
"Two employees were pushing a large empty plastic tub into position. The tub was on its side, and one employee's hand was on a short leg at the bottom of the tub, when that employee's left little finger was caught between the tub leg and a roof support beam. The employee suffered an amputation to the finger.",1
An employee was pressure-washing a property when his foot became tangled in the water hose. The pressurized water then lacerated the top of his right foot.,1
"During welding work to secure a steel beam, an employee stepped on the beam while trying to hand another employee a wrench. The beam tilted; the employee slipped and fell about 3 feet, landing on the beam and suffering four broken ribs.",1
An employee was trying to position an I-beam in place when it fell on its side. The employee's right thumb was crushed between the beam and the floor; the thumb tip was medically amputated.,0
"An employee was cleaning up paper when they slipped on paper and fell, resulting in a right hip fracture.",1
"An employee was removing plastic from a machine that cuts plastic for food packing. The automatic blade moved and struck the employee's left wrist, resulting in a laceration.",1
"At 3:45 p.m. on October 22, 2022, an employee was installing drain tile in a trench. A nearby retaining wall shifted and collapsed into the trench onto the employee, who suffered broken ribs. The employee was hospitalized.",1
An employee was inspecting a mud pump when its piston shifted. His fingertip was caught and amputated between the piston ring and the cylinder liner.,0
"An employee was adjusting a machine. A glob of hot glass hit the employee's glove, and the employee's other gloved hand then entered the machine. The employee suffered burns to both hands and was hospitalized.",1
"An employee was fixing a pipe on an elevated platform. He fell to the ground about 12 feet below, suffering a fractured skull and a traumatic brain injury.",1
An employee was working on an extension ladder to remove a valve when the ladder slid out. The employee fell 11 feet with the ladder to the floor below and was hospitalized with a facial fracture and laceration.,1
"On October 22, 2022, an employee was using a floater to apply dry fertilizer. The vehicle hit a small bump, then a ditch. It bounced, and the employee suffered a burst fracture to the L1 vertebra. The employee was hospitalized.",1
An employee was handling a horse when it kicked the employee in the face. The employee was hospitalized.,1
An employee was changing blades on a mower when their glove became caught in the shaft. The impact wrench then amputated the employee's left thumb.,0
An employee's foot was caught by the wheel of a mobile privacy screen. She fell to the floor and suffered a broken hip.,1
A clerk was shot by a customer.,1
"An employee stepped on a cylinder bar, slipped, and fell to the floor. The employee suffered a broken right ankle.",1
"On October 23, 2022, an employee was cleaning out a dough roller when the rollers pulled the employee's fingers into the machine at the nip point. The employee sustained an amputation of the left middle fingertip, loss of the nail on the left ring finger, fracture to the left ring finger knuckle, and the loss of the nail of the left index finger. The employee was hospitalized.",1
An employee was chopping lettuce with a chef's knife and partially amputated the tip of his right thumb.,0
A cook was chopping ingredients when his knife lacerated the top of his left thumb.,1
"An employee was installing a wiper rubber on tubing before pulling the tubing out of a well. His right ring finger was caught between two pieces of metal on the tubing tongs, and the fingertip was amputated.",1
An employee sustained anaphylaxis after being exposed to an aerosolized fragrance spray.,1
"Employees were working on an excavator bucket that was sitting on the ground. An employee placed a block to stabilize the bucket. The fit was not tight enough, so the employee removed the block to reposition it. The bucket then rolled forward and pinned him across his torso and lower back. He suffered a dislocation at the left hip socket, as well as a broken pelvis, and was hospitalized.",1
"Two employees were riding in a golf cart. Both of them fell out of the cart to the ground; one suffered lacerations to the face and head, as well as a sprained arm, and was hospitalized.",1
"An employee was walking in a warehouse. A forklift struck the employee, breaking the employee's left leg. The employee was hospitalized.",1
"An employee tripped on an uneven surface and fell, suffering a broken hip.",1
"A forklift struck an employee who was kneeling down. The employee suffered broken vertebrae, a broken hip, and a broken right leg.",1
An employee was pulled into a routing machine and suffered a skull fracture.,1
"An employee was removing signs from a highway. A semi truck struck him, breaking his left wrist and right foot.",1
"An employee was testing a treadmill that a patient was using. She stepped onto the belt of the treadmill and fell backward to the ground, landing on her left arm. The employee sustained a fractured left wrist and forearm.",1
An employee was lifting trash from a trash can when they fell and struck their head on the concrete ground.,1
"An employee was found lying on the floor, non-responsive, with a wound to the back of the head.",1
"An employee was stepping down from the cab of a truck. He fell, landing on his right leg on the ground about 4-5 feet below and sustained a right tibia fracture. He was hospitalized.",1
"At 6:47 a.m. on October 24, 2022, an employee was training another employee and cleaning a fryer. The fryer exploded and hot oil splashed the first employee, burning a large portion of the employee's body. The employee was hospitalized.",1
"An employee was on an 8-foot A-frame ladder, changing an HVAC filter. The ladder slipped and he fell, suffering a broken leg. He was hospitalized.",1
"An employee was in the operator's basket of a telehandler, driving it off the back of a lowboy trailer. The telehandler slipped off the side of the trailer. The employee was ejected and fell to the ground, suffering several broken lower-back vertebrae and a broken right shoulder. He was hospitalized.",1
"On October 24, 2022, at approximately 8:00 p.m., an employee was attempting to remove the vinyl film that was wrapped around a roll. The employee's hand was pulled into a pinch point of an extruder machine, resulting in fractures to their left radius and ulna. The employee was hospitalized.",1
An employee was in a stand-up forklift when it collided with a sit-down forklift. The employee's foot was caught between the two forklifts. The big toe was crushed and had to be partially amputated.,0
An employee was working with a laminating machine to ensure that the rollers were an appropriate temperature when his right arm became caught on a sticky substance on the rollers and was forced into the machine. The employee sustained skin tears that exposed muscles and tendons.,1
An employee tripped over a patient's nebulizer and fell resulting in a fractured pelvis.,1
"An employee was adjusting a gooseneck trailer. The trailer hitch caught the employee's left index finger, causing an amputation to the tip.",1
An employee was operating a press when it caught his fingers. He suffered partial amputations to the index finger and middle finger.,0
An employee was working on a straw wrapper machine. The employee was removing straws from the machine's hopper when the straw transfer belts caught the employee's left middle finger. The employee suffered a partial amputation to the finger.,1
An employee was troubleshooting/unjamming a milk bottle machine. The machine cycled and the mold clamped down on the employee's right hand. The hand was fractured and multiple fingers were amputated.,1
"An employee was adjusting skewed product in a machine. The employee's hand was pinched between a test head and the product, and the employee sustained finger fractures.",1
"An employee was on an A-frame ladder inside a bunker, which he had entered to change a conveyor belt roller. While he was looking for a place to attach his retractable lanyard, the ladder slid forward. He fell, landing on the bunker floor and on the self-retracting lanyards attached to his body harness. He suffered broken ribs.",1
An employee was removing cartons from a machine. A chain and sprocket caught the employee's right little finger and amputated it.,0
A Kenco Logistic Services employee was operating a stand-up reach forklift in a warehouse. The forklift struck a structural column; the employee's left foot and ankle were crushed between the back of the forklift and the column. The incident took place during a training activity.,1
"An employee was carrying an object when they tripped over a bucket and fell to the floor, resulting in a fractured lower back and elbow.",1
"An employee was checking the transmission harness under a work truck on stands. A nearby tractor's ignition was turned, and the tractor started and moved forward. It pushed the work truck off the stands and onto the employee below causing fractures to the jaw, hand, collarbone, and back.",1
"Employees were aligning an electrical cabinet on a deck inside the entrance to a wind turbine. They were using a come-along, connected to an anchor at the base of the tower, to position the cabinet at the center of the tower. While an employee was checking for proper positioning, the cabinet moved toward the tower wall and his right index finger was caught in the 1/2-inch gap between them. The fingertip was amputated.",0
"An employee was operating a crane as molten metal was poured. The mold that had just been poured fell off a roller conveyor line, spilling molten steel onto the employee's right leg. The steel entered his right boot, burning his calf, ankle, and foot.",1
An employee was operating a forklift when it ran out of fuel. Another employee helped push the forklift to a fuel point. The operator's left foot was caught between the forklift and the fueling station. The operator was hospitalized for a left foot fracture.,1
An employee was taking inventory in an aisle when they were struck by a forklift. The employee sustained a head wound and lower back injury.,1
"An employee was unboxing a piece of sheet metal outdoors. The employee placed the sheet against a table and a gust of wind caused the sheet metal to blow into the air. The employee attempted to catch the sheet, resulting in a laceration in the right forearm. The employee was hospitalized.",1
"An employee was walking through an apparatus bay when the large metal canopies in the area fell, causing an electrical cabinet to fall over onto the employee. The employee sustained a broken ankle and lacerated finger.",1
"An employee was standing on a ladder tying off a scaffold. A nearby forklift struck the ladder and the employee fell approximately 8-feet to the ground, resulting in fractures of the ribs and vertebrae as well as a bump on the head and a bruised side.",1
"An employee was installing a bolster. As the employee was checking the bolster's height, it jumped due to pressure on the chain. The employee's left middle finger was caught in a hole and the fingertip was amputated.",1
"At 12:40 p.m. on October 24, 2023, a telehandler struck an employee with its forks as it backed up. The employee suffered a broken leg.",1
"An employee was filling a jockey pump with gasoline when some gas spilled on a hot muffler and ignited, burning the employee's left ear, lips, left cheek, and right hand.",1
An employee was cutting a board with an electric saw. The saw partially amputated the employee's left index finger.,1
"A trackhoe was pushing a 12-inch by 20-foot section of pipe with the bucket. An employee's foot was caught between the pipe and the ground, resulting in a fractured right leg.",1
An employee was assisting a forklift to offload glass from a truck and move it to a rack. The employee was struck by the forklift and then the glass fell off the forklift and struck the employee. Being struck by the forklift broke his lower left leg; the glass falling broke his right upper arm. The employee was hospitalized.,1
"On October 25, 2022, an employee was using a magnet attached to a crane to move a 350-pound steel part to a pallet for shipping. The magnet failed and the part fell onto the employee's left foot. The employee was hospitalized with a fractured left toe and lacerations.",1
"An employee was unwinding scrap wire from a spool and kicking it into a pile on the floor. His foot became entangled in the wire and he tripped, hitting the side of the metal reel and breaking his right leg.",1
"An employee was on the ground, spotting a co-worker who was installing a fiber-optic cable while elevated in a bucket truck. As the strand of cable was raised, an attenuator snapped off the power pole with the 14.4 kV power line still attached and the power line fell onto the boom arm of the bucket truck. The truck became energized and caught on fire. The employee tried to bring their co-worker down but their hands and body were drawn against the controls of the truck and then the employee was thrown to the ground. The employee sustained electrical and thermal burns to over 75 percent of their body.",1
"An employee was using a boring machine to bore for a gas line when the machine failed. When the employee tried to fix the machine, it crushed his right hand, resulting in amputations to his right index, middle, and ring fingers.",0
An employee was cutting a groove in a board. The employee lifted the board and was trying to lay down a support wheel when the sawblade amputated the employee's finger.,0
An employee was backing up a dump truck when it got stuck. He got out of the vehicle and was moving to the rear when he lost his balance on the uneven ground and fell. He suffered a torn muscle in the left leg.,1
"An employee had gotten out of a vehicle and was walking around the front of it. Another vehicle collided with the employee, who suffered an injury to the left foot/ankle.",1
An employee was walking on top of a company vehicle used to move trusses. The employee stepped onto the trusses on the truck and the load shifted. The employee fell 15 to 20 feet to the ground. Both of the employee's legs were broken; one leg required surgery to repair.,1
"An employee fell from a ladder to the floor, suffering a broken left ankle.",1
"A temporary employee was helping to change a 1,200-pound metal coil. While the coil was being turned, it began to fall and struck the employee's leg. The employee sustained a broken left leg, which required surgery.",1
"An employee tripped on a stack of floor mats, fell to the floor, and suffered a broken femur and back injuries.",1
"An employee was removing a part from a press when the press malfunctioned and came down, amputating the employee's left index finger.",1
"At about 9:00 a.m. on October 25, 2022, an employee was performing maintenance on the billet pump and deflector in a furnace. When exiting the furnace, the employee fell approximately 13 feet through a floor hole to the concrete below. The employee sustained a fractured right ankle.",1
"An employee was on a platform for a bottle filler. Next to the platform was a lift table used to lift pallets of bottle crown boxes; as the boxes were pulled from the pallet, the table raised the pallet. Between the platform and the lift table was a guardrail with sheet metal covering one side, acting as a backstop for the pallets. The employee was raising the platform to access a new box of crowns. A piece of wood from the pallet had become stuck under the guardrail, causing it to rise with the platform. The wood snapped. The guardrail fell back into place and pinched the employee’s left middle finger against a bracket, causing a fracture and an amputation to the fingertip.",0
"At 10:00 a.m. on October 25, 2022, an employee was clearing bows that had become stuck in the pneumatic shears he had been using to cut them. The shears amputated his left index finger.",0
"An employee was walking in a warehouse aisle when stored materials fell from a rack overhead and struck the employee, who suffered a broken knee and was hospitalized.",1
"An employee was descending a ladder. He slipped and fell to the ground about 3 feet below, sustaining a left knee injury.",1
"An employee was descending a steel reinforced column. The employee slipped and fell about 15 feet, landing on the ground and sustaining broken ankles.",1
An employee had just trimmed the fronds of a palm tree from a portable extension ladder. He fell from the ladder; his back landed on a large landscape rock and his ribs were broken. He was hospitalized.,1
"An employee suffered a thumb amputation, caused by a fan.",1
"An employee was standing with his right hand placed on a table with casters. The table moved, causing the employee to lose balance. The employee placed his left hand on the table's edge, and the table flipped. The employee fell backward, striking his head on the tile floor. He was hospitalized for a scalp abrasion and cranial hemorrhage.",1
An employee was cutting wood with a saw. The saw lacerated the employee's left hand.,1
"An employee was using a pallet jack to load pallets into a trailer. The employee stepped off the pallet jack and the vehicle continued to move forward, crushing his leg between the pallet jack and a pallet. He sustained fibula and tibia fractures and two ankle bone fractures.",1
"An employee was working on a hot strip mill when a co-worker approached from behind and pushed in the back of the employee's left knee, causing it to buckle. The employee fell to the ground and sustained torn ligaments in the left knee.",1
An employee was repairing a leak within a fuel dispensing system when the system ignited in flames. The employee sustained third-degree burns to various parts of the body. Another technician also sustained minor burns.,1
"On October 26, 2022, an employee was walking from his work area to a breakroom. He slipped in a pool of an oily substance that had leaked from a parts cart, fell to the floor, and suffered a broken left hip.",1
"On October 26, 2022, at approximately 3:30 PM, an employee was walking toward the bank of elevators. As she walked between two nearby coworkers, the employee's left foot became stuck to the floor as her right foot stepped on the back of her left shoe. The employee tripped and fell forward, striking her head and upper body against the wall. The employee was hospitalized and had surgery for a fractured left humerus.",1
"On October 26, 2022, an employee tripped over another employee while turning, fell, and landed on the tile floor. The employee suffered a broken right hip.",1
"An employee was changing a power pole and installing a transformer when he made contact with the primary electric line, resulting in an electric shock and burns. The employee was hospitalized.",1
An employee was cleaning up the site when they were struck by debris thrown from the roof resulting in a fractured neck.,1
An employee was advancing a sheet of foil through the knife on a pouch packaging machine when the knife cut his left index finger. The employee sustained an approximately 4-millimeter fingertip amputation.,0
"An employee tripped and fell to a hallway floor. She suffered a broken right kneecap and was hospitalized, requiring surgery.",1
"During the filming of a television scene, an employee tripped on the electrical cord for a Christmas tree. She fell to the floor and suffered a broken left hip.",1
"An employee was moving trash in a trash container. A cabinet shifted and caught the employee's right ring finger, causing the amputation of the fingertip.",0
An employee was pulling a trailer away from a dock door. The trailer struck another trailer that was driving around a corner; the employee suffered a collapsed left lung.,1
"An employee was assisting a co-worker empty 55-gallon trash barrels into a self-dumping hopper on a forklift. As the injured employee reached to help empty the drum, the co-worker used the forklift to move the barrel. The drum shifted suddenly and pinched the injured employee's left thumb between the barrel and the hopper, resulting in a left thumb fracture at the first joint.",1
"An employee was stepping out of a truck when they slipped on the first step and fell to the ground, resulting in a back injury.",1
An employee was helping on the end of a book-making line. He was retrieving a stuck book from a book stacker. Components in the stacker amputated his middle finger at the knuckle. He was hospitalized.,1
An employee fell while climbing a staircase. The employee suffered right arm and elbow injuries and was hospitalized.,1
An employee was ascending a job-made ladder when they slipped and fell to the ground. The employee sustained compression fractures of three lumbar vertebrae.,1
"An employee was closing the roll-up door on the back of a delivery truck. The door slammed on his right hand, causing a partial amputation to the little finger.",1
Two employees were operating a horizontal pivot-style bandsaw to cut metal when the hydraulic clamp was activated and the injured employee's left middle fingertip was pinched in the clamp and amputated.,0
An employee was performing a pre-trip inspection on his work truck. He was positioned between the cab and the trailer when he tripped over the air hoses on the cab and fell off the side of the truck to the ground. The employee sustained a laceration to his head and fractures to his wrist and face.,1
"On October 26, 2022, at approximately 9:00 a.m., a framing employee was working from the top plate on a second-level wall when he fell to the ground below. The employee was hospitalized with fractures to their lumbar column and right foot. The employee was wearing fall protection that was not tied off at the time.",1
An employee was working on the roof of an elementary school when they fell 13 feet from the edge of the roof to the cement pavement. The employee sustained fractures to the skull and ribs.,1
"An employee was removing a smoke/duct detector while standing on a 6-foot step ladder. He fell from the third step of the ladder to the carpeted concrete floor about 3 feet below, suffering a dislocated left elbow and a broken left ulna. He was hospitalized, requiring surgery.",1
An employee stepped outside of the store for his break and was shot in the stomach. The employee was hospitalized.,1
An employee tripped and fell to an office floor.,1
"An employee fell from a lift gate to the ground, resulting in a broken hip.",1
"An employee was replacing a window at a residential house when he fell approximately 11 feet from a ladder, landing on concrete. The employee was hospitalized with broken ribs and contusions on his elbows and shins.",1
An employee was working on a personal project during their break. The employee was cutting a piece of wood on a table saw. The saw jammed and the wood kicked back toward the employee's left hand causing their hand to contact the saw blade. The employee sustained a left index finger laceration and a left middle fingertip amputation.,0
"An employee was uncrating a boxed door display weighing about 800 pounds for showroom display. He was using a hand-held drill to unscrew the wooden crate. As the employee unscrewed the last piece of plywood on the crate, the 50-pound piece of plywood fell on top of his hand, and his right middle finger became caught and was amputated.",0
"An employee was working on a drill press. When the employee was setting a part with the left hand, the clamp activated and amputated a portion of the employee's left thumb.",0
"An employee was standing on the ground waiting for a tree limb to fall when they were struck by the limb. The employee sustained fractures to their left shoulder, clavicle, and lower leg, and the left side of their pelvis.",1
Employees set up a platform to perform hydraulic tensioning on the manway covers. The segments were brought up to the desired pressure. An employee was about to move a hydraulic line when hydraulic fluid released and injected into their left thumb.,1
"An employee was rolling two 1,00-pound iron pipes by hand when one of the pipes rolled back toward him, causing his right arm to become caught between the two pipes. He sustained a right radius fracture and was hospitalized for surgery.",1
"An employee was descending a power pole using gaffs. At approximately two feet from the ground, the employee stepped down with the left foot, causing the right foot and gaff to dislodge. The right gaff contacted the left ankle resulting in a puncture wound the left ankle.",1
"On October 26, 2022, an employee was leading a game of balloon volleyball in a hospital dayroom. She was sitting when she fell from a dining room chair to the floor and suffered a broken hip. She was hospitalized, requiring surgery.",1
"An employee was using a forklift to remove a pallet from a container and place it on the ground. After doing so, the employee put the forklift in park and pulled the hand brake before getting out. He walked to retrieve the pallet when the forklift jerked back and rolled onto the employee's right foot. The employee was hospitalized.",1
An employee was walking on the sidewalk when she tripped and fell to the pavement. She was hospitalized with a broken wrist and ankle.,1
"On October 26, 2022, a convenience store employee was shot twice by a customer, resulting in bullet wounds to his right arm and left hand. The employee was hospitalized for his injuries, which required surgery.",1
"An employee was threading a 5/8-inch round bar into a machine. A spinning bar caught his glove and pulled in his left hand and fingers. He sustained an amputation, laceration, and fractures to the thumb, index finger, and middle finger.",0
"An employee was unpacking a crate of glass panes. The employee was standing approximately 6 to 7 feet away from the crate, removing protruding screws from the lid that had just been removed from the crate. Six panes of glass (weighing approximately 2,000 pounds) fell out of the crate and struck the employee on the backs of his legs. The employee sustained a compound fracture to his lower left leg.",1
An employee was struck by a forklift while walking backward. The employee's right leg was broken.,1
"An employee was using a 3-foot-long pipe cleaner brush to clean the rollers on a glue spreader machine. She dropped the pipe cleaner, and while retrieving it her right hand became caught in the rollers resulting in amputation to the ring finger at the second joint.",1
"An employee was testing current continuity on a 480-volt breaker box when the breaker exploded, resulting in burns to his face, chest, and hands. A second employee was also burned but was not hospitalized.",1
"An employee slipped on a piece of chicken, fell to the floor, and suffered a broken right humerus.",1
"An employee was cleaning a hopper when the rotary gate in the depositor moved, causing the employee's fingertip to become caught in the machine. The employee sustained an amputation to a fingertip on their left hand.",0
"An employee slipped on a child's blanket and fell to the floor, fracturing her pelvis.",1
An employee was cutting hoses off fittings with a band saw when his glove became caught and his right thumb was pulled into the blade. The tip of his thumb was amputated.,1
"An employee was feeding a cable through a feeder tube when he was struck by a piece of equipment, resulting in a broken arm.",1
An employee was installing a chain for a semi-automatic gluer. The machine engaged and amputated the employee's left ring and middle fingertips. The machine was not locked out at the time.,1
"An employee was performing maintenance on a conveyor belt. While they were cleaning the grease fitting on the timing belt, the employee's finger became caught in the conveyor system, causing a partial finger amputation.",0
"At 8:15 a.m. on October 27, 2022, an employee was hanging a calendar on a wall. He was on the second step of a ladder, waiting to be brought a level, when he fell. His right leg hit the ladder's side rail as he fell and he suffered a broken right tibia.",1
"An employee was walking to their vehicle when they tripped over an empty pallet and fell to the ground, resulting in a fractured and dislocated elbow.",1
"On October 27, 2022, an employee was lowering an overhead crane. The employee's finger was caught between the rope and the block, and the employee suffered a partial finger amputation.",0
An employee suffered an amputation to the left middle finger while using a slide saw.,1
"An employee was pruning a tree in the back yard of a residential home. The ropes securing him to the tree were cut, and he fell from the tree to the ground 17 below. He suffered a broken little finger and a back injury and was hospitalized.",1
"Employees were performing a paper splicing operation at the floating loopers of a saturator machine. The machine's counterweight (weighing 10,000 lbs.) came down on an employee who was under the counterweight causing fractures to his spine, ribs, and a leg. The machine was not locked out/tagged out at the time.",1
An employee was walking through the corrugated raw materials area when they were struck by a forklift that was moving in reverse. The employee sustained fractures to their left ankle and two of their toes.,1
"An employee was removing the straps for three glass panels that were on a wooden rack when the panels shifted and fell onto him, knocking him onto the ground. The employee sustained crushing injuries to his hip/pelvis, a femur fracture, and internal injuries.",1
"On October 27, 2022, an employee was stepping down from the back door of a truck to a dock. He fell from the dock to the ground about 4 feet below, suffering injuries to the arm, the jaw, and the back of the head.",1
"An employee's finger was caught in a vehicle lift, resulting in a partial amputation.",1
"An employee was jacking up a semi-trailer to replace a tire. He had raised one side of the trailer axle. While making adjustments to a second jack, the trailer air ride system lost air pressure, causing the first jack to slip off the axle and pinch his right middle finger between the second jack and the lifted axle. The employee's right middle finger was medically amputated at the second knuckle.",0
An employee's left index and middle fingertips were amputated while they were operating a grommet machine.,0
"On October 27, 2022, an employee was working on a stuck welding fixture on a bench. An air cylinder cycled, and the employee's left ring finger was caught between the cylinder and a block. The employee suffered a partial amputation to the finger.",0
Employees were offloading a truck when cryogenic equipment fell from the truck and struck an employee. The employee sustained injury to an artery in their right arm and required surgery.,1
An employee was placing fish on and off a conveyor belt when his hand was cut by a fish fin.,1
"An employee was removing metal roof panels. The employee fell through the roof to the ground about 15 feet below, suffered a broken elbow, and was hospitalized.",1
"A temporary employee was sanitizing a machine when his arm was caught in the conveyor belt, resulting in a broken left arm and a laceration.",1
An employee was adjusting a tray in a proofer. His left thumb contacted a chain and sprocket and was amputated at the first knuckle.,1
"An employee was crouching down next to an excavator when a front loader backed over them. The employee sustained injury to their arm, elbow, and hip.",1
"On October 28, 2022, an employee was lowering a traffic control gate when their right ring finger was caught between the gate and the frame. The employee's finger was amputated.",0
An employee was struck by a car in a parking lot. He suffered an ankle injury and was hospitalized.,1
"An employee was operating a double jack in the warehouse area. The employee was repositioning the jack when his leg was caught between the jack and an upright rack, fracturing his lower left leg.",1
"On October 28, 2022, an employee was moving a die with a crane when they were pinned between the die being moved and another die. The employee was hospitalized with a fractured leg.",1
"An employee fell from an extension ladder to the concrete floor, suffering a broken shoulder and arm. The employee was hospitalized.",1
An employee was re-threading fiberglass strands into a feed tube when her right hand and forearm were caught between the rollers. She was hospitalized for lacerations to the right forearm and hand as well as fractures to the right hand and wrist.,1
"An employee was troubleshooting a conveyor. While he was checking the tension on its chain, his left index and ring fingers were caught and crushed in the chain and sprocket. The employee suffered a broken left index finger and a ring fingertip amputation.",1
A border agent was performing a vehicle stop when someone left the vehicle and tried to escape. The employee suffered a broken ankle while chasing this person through rough ground.,1
An employee was cutting meat using a meat slicer when approximately 3 millimeters of their thumb tip was amputated by the blade.,0
"On October 28, 2022, an employee was cleaning an air compressor when their middle finger was amputated above the first knuckle. The machine was not locked out at the time.",0
"An employee was pushing 1,300-pound totes of product down a conveyor when his foot was caught between the conveyor and the roller. The employee sustained a foot injury and was hospitalized.",1
"A gas-powered forklift was inside the grinding department for approximately one hour.  An employee began to have blurry vision, dizziness, nausea, fainting episodes, and seizures and was hospitalized due to carbon monoxide poisoning.",1
"An employee was inserting fabric into a winder machine when her hand was pulled into the machine. Her right little finger was amputated, and she sustained an injury to her right ring finger.",0
An employee was hospitalized with burns on her face and hands after being splashed with hot oil.,1
"An employee was using a band saw to cut meat and bones. The product jumped, causing the employee's right index and middle fingertips to contact the blade. Both fingertips were amputated.",0
"An employee was blending hot food. Pressure built up inside the blender, causing food to spray out and burn the employee when the blender was opened.",1
An employee was walking down a flight of stairs when their foot got stuck in the rail and they fell approximately 7 to 10 inches to the concrete floor below. The employee sustained a fractured right hip.,1
"An employee was using a dock stocker when it pinned the employee's ankle against some product during a sharp turn, resulting in an ankle fracture.",1
"An employee was servicing a laundry press with the basket that surrounded the piston in the air to provide access. As the employee was tightening diaphragm bolts, the machine activated and crushed the employee's hands between the hydraulic piston press plate and laundry tub. The employee sustained amputation of the left hand, extensive fractures, and possible amputation of the right hand.",1
"An employee was moving a TV from the back of a box truck to the liftgate for delivery. As the liftgate was activated, the employee lost his balance and fell from the liftgate, resulting in a left tibia and fibula.",1
"Two employees were attaching a tow-behind generator to connect it to a box truck. While they were trying to set the hitch, the generator rolled back and caught an employee's left little finger between its hitch and the truck's hitch. The employee suffered a contusion and a partial amputation to the finger.",0
An employee was unclogging cut-off film from a grinder rotor blade. The clogged film came loose and the employee's hand was pulled between the rotor blades. The employee's middle finger was amputated at the bottom of the nail bed; their ring finger was amputated at the middle of the nail bed.,0
Employees were cleaning out a soybean bin.  The auger in the bin was activated and cut an employee's left leg.,1
"An employee was disconnecting a hose from an ISO container when a stream of waste chemicals, which included aniline, flowed out from the ISO container and struck the employee. The employee was hospitalized with aniline poisoning.",1
"An employee tripped and fell backward, striking his head on the ground. The employee sustained a skull fracture and brain bleed.",1
"An employee slipped on a wet floor and fell, suffering a broken left hip. The employee was hospitalized.",1
"On October 29, 2022, employee 1 was positioning a torque converter into a yoke. Employee 2 was lowering the torque converter using an overhead crane. Employee 1's right ring finger was caught in a pinch point, resulting in an amputation above the fingernail.",0
"An employee was trying to unjam 1,700-pound steel pipes. A pipe rolled back and crushed his fingers against another pipe. His left little finger was amputated and the ring finger was injured, requiring stitches.",0
"An employee fell while descending a five-step ladder/stool, suffering a broken left leg.",1
"While slack was being taken off a line, a pipe shifted and struck the employee, resulting in a left ankle fracture.",1
An employee was positioning a jack stand. The employee's finger was caught and crushed between the jack stand and a vehicle.,1
"On October 29, 2022, an employee was walking through the dewatering area when they slipped in a puddle of water and fell, resulting in a fractured right hip.",1
A temporary employee was cleaning a machine when its auger amputated his left little fingertip.,0
An employee was inspecting a gas regulator when the gas ignited and he was burned by a flash fire.,1
"An employee was working with an extruder and punch press. The machine rolled extruded plastic into two large coils held together by a shaft, which had become stuck; the employee was trying to release the shaft by releasing air from the chuck while the shaft was hit from the opposite side with an item. The shaft and coils broke free, and the employee's left index fingertip was caught between the shaft and the second coil and amputated.",0
"An employee was stringing and setting up a wire drawing machine when his glove was caught between a wire and a block, resulting in an amputation to his left middle finger, just above the first knuckle.",0
"An employee was cleaning the underside of a conveyor using a scraper. The scraper became caught and the employee's left arm was pulled into the conveyor, resulting in multiple fractures. The conveyor was not locked out at the time.",1
"An employee had replaced a roll of film on the repack machine. The film jammed in the sealing head as the machine cycled. While clearing the jam, the sealing head closed on the employee's fingers causing amputation of the left index and middle fingertips.",1
"An employee tripped over an uneven surface in a parking garage, fell, and suffered a broken right hip.",1
"An employee was cleaning at a new home under construction when they fell from the second floor, resulting in a back injury.",1
"An employee was climbing down a structure. He climbed down a ladder, then fell through an adjacent open grate that was 10 feet above a lower level. He landed on that level with the lower half of his body dangling over another open grate, began to fall through that grate as well, but then was able to stop his fall. He was hospitalized for surgery, having broken his leg in the first fall.",1
"An employee had just filled a bin with ice using a shovel. The employee slipped on ice on the floor and fell, suffering head and back injuries.",1
"An employee tripped over a manual pallet jack and fell, suffering possible broken vertebrae. The employee was hospitalized.",1
"An employee was pulling an empty cart into a warehouse when they slipped and fell to the concrete floor, resulting in a fractured femur.",1
An employee was rigging a storage container with chains to be moved by a front-end loader. The loader moved while the employee was attaching the chain. The employee's left hand became caught in the chain resulting in amputation of the ring finger and half of the little finger.,1
"An employee was standing in front of the printer in her cubicle. When she turned away from the printer, she fell forward onto her right side. The employee sustained a fracture to the right hip.",1
"An employee was installing cables to run behind the breaker controls in the main electrical room. The employee was standing on the third rung of a 6-foot A-frame ladder. As the employee was pushing a cable behind the panel, the ladder tipped, causing the employee to fall approximately 3 feet to the floor. The employee landed on their left hand and suffered a fractured wrist. The employee was hospitalized.",1
"On October 31, 2022, an employee was operating a scissor lift to frame a firewall in the auditorium of a new school. The employee stepped from the lift onto the masonry wall and lost his balance, causing the employee to fall approximately 18 feet to the floor. The employee was hospitalized for a broken nose, laceration to the right ear, broken ribs, and injury to his liver.",1
"On October 31, 2022, an employee was exposed to a gas leak in the kitchen, causing them to become light-headed and nauseated. The employee was hospitalized.",1
An employee was using a brake machine and amputated a fingertip.,1
"On October 31, 2022, at approximately 2:13 PM, two employees were inspecting a crankshaft on rollers. Employee 1 was rotating the crankshaft manually as employee 2 was checking a gauge. Employee 2's hand was caught in a pinch point between the rollers and the counterweight of the crankshaft, resulting in an a partial amputation of the right thumb.",0
"An employee was realigning a jammed box on a knuckle boom conveyor. The conveyor caught her right hand, causing partial amputations to the middle finger at the middle joint and the little finger at the proximal joint.",0
"An employee was operating a riding lawn mower around a property when they were stung by bees multiple times on the upper body, face, and head.",1
"An employee was pulling products from a storage rack when a damaged cardboard box collapsed, causing a pallet full of product to fall approximately 15 feet. The 700-pound pallet struck the left side of the employee's body, resulting in an injury to the left shoulder and hip.",1
An employee was cleaning debris from the blade of an edge bander machine using an air wand. The employee sustained a partial amputation to the right index finger.,0
"An employee was closing a rail car door in between a powered industrial truck (PIT) and a rail car. The PIT driver reached back to hand the employee a zip tie to secure the door when his foot slipped off the brake, which caused the PIT to roll over the employee's left leg. The employee sustained a broken leg.",1
"On October 31, 2022, an employee was using a hydraulic splitter to split wood. A log (estimated 24 inches in diameter and 20 inches long) fell and crushed the employee's hand against a metal part of the splitter. The employee's left little finger was amputated.",1
"An employee tripped and fell to the ground in the loading dock area, resulting in six fractured ribs, a right shoulder contusion, and a fractured cheekbone.",1
"An employee was using a fabric cutting machine when the machine slipped off the table. The employee reached for the machine, causing the blade to lacerate three of his fingers.",1
"An employee was removing pads from crane outriggers. The outriggers were retracted as the employee was holding them, causing him to sustain three fractured fingers requiring surgery.",1
"An employee was driving a truck, pulling away from a plant, when six vape pen batteries in his right front pants pocket ignited. He suffered severe burns to the upper right leg.",1
An employee was working at an angle head grinder when his right little and ring finger came in contact with the spinning wheel. The employee sustained a right little and ring fingertip amputation.,0
"An employee was working on a piece of duct work when the duct work roof fell in, causing the employee to fall 15 feet to the bottom of the duct. The employee sustained a cut to the back of their head, a fractured pelvis, a collapsed lung, and broken ribs on the left side of their chest.",1
An employee was making a batch of potassium iodide when a reaction occurred and it came out of the vessel. The employee sustained first-degree burns and lung irritation due to contact with the chemical.,1
An employee was flagging for traffic control when he was struck by a truck that was backing up. The employee sustained a punctured lung and broken ribs.,1
"On October 31, 2022, an employee was walking across a 3:12 pitched metal roof of a warehouse to check the gutters. The employee stepped onto a skylight, causing him to fall approximately 20 feet onto metal tubing and the concrete floor below. The employee was hospitalized after sustaining fractures to the ribs, wrists, and vertebrae as well as neck injuries and a head laceration.",1
"An employee was driving a tug to deliver luggage to a terminal. The employee was parking the tug when the brakes failed. The employee then jumped off. The tug struck the building and rebounded toward the employee, the wheels struck the employee's foot and he sustained ankle and toe fractures.",1
"A crew was servicing a well. The injured employee was using a manual backup tool to hold a pipe while it was pulled from a well to be put into an x-ray machine. The pipe slipped and the employee's finger was caught between the tool and the x-ray machine, causing the left ring fingertip to be crushed and amputated.",0
An employee was adjusting a strap securing a truck frame to a roll back. The truck frame fell on the employee's right arm.,1
An employee was removing escalator steps for state inspection when their left hand became caught between the deck plate and step. The employee sustained a left thumb fracture.,1
"An employee was obtaining supplies when her finger got caught in a door, causing amputation of the right middle fingertip.",1
"An employee was on the roof of a delivery location when they fell through a skylight to the ground below. The employee sustained a fractured right hip, a separated shoulder, and lacerations to his face.",1
An employee was transferring product between two tractor trailers. One of the trucks was put in reverse while the employee was climbing into a trailer. The employee was caught between the two trailers and sustained a broken pelvis and broken ribs.,1
"An employee was pushing a cart full of cores when the cart struck an expansion joint on the floor. The employee's right ring finger was caught between a steel I-beam and the cart, resulting in a fingertip amputation.",0
"An employee's glove was caught on the rotating spindle of a computer numerical control (CNC) machine, resulting in the amputation of two fingertips and a broken finger.",1
"An employee was using a forklift to pull a stuck forklift from a grassy/muddy area. While he was seated on his forklift, the chain broke and struck him in the face, breaking bones that required surgery.",1
"An employee was carrying hot asphalt in a bucket when they fell forward, causing their hand and forearm to become submerged in the bucket. The employee sustained burns to the right hand and forearm.",1
"An employee had been cutting plate with an acetylene torch. The employee left for lunch, during which the regulator was turned off. When the employee returned from lunch, he turned the valve to begin work and a fire erupted from the oxygen tank regulator. The employee sustained burns to the stomach area.",1
An employee was standing on a five-gallon bucket to reach the top of a cabinet when they slipped and fell off the bucket onto the floor. The employee sustained a right femur fracture.,1
"An employee was using a wooden axe handle to roll a pipe on the production line. The employee bent to look into the pipe. Upon standing back up, the employee's right hand contacted the table and the pipe rolled over the employee's right little fingertip, resulting in an amputation.",0
A delivery driver was crossing the street to return to their truck when the employee was shot in the hip by a drive by shooter. The employee sustained a pelvic fracture.,1
"An employee was playing kickball with the children she was in charge of. She moved to kick the ball and fell on her right side, breaking her right hip.",1
"An employee was assisting in transferring a patient from the bed to their wheelchair. Upon lifting the patient, the employee sustained a cervical fracture.",1
"A truck driver was cleaning out the tailgate of his truck when he was struck by a skid steer loader, resulting in a crush injury of his left arm.",1
An employee was driving a double-fork pallet jack with two pallets of product when the pallet jack struck a metal barrier that is against a wall. The employee's foot got caught between the pallet jack and the metal barrier resulting in a right ankle/foot fracture.,1
"An employee was preparing a patient lift sling to help a resident into the shower. The strap of the sling was on the ground and the employee's foot became tangled in the strap, resulting in a fall against the patient lift. The employee sustained bilateral leg fractures.",1
"An employee was using their foot to push a hand truck with a basket of parts under a workstation. The employee's foot became caught between the gap in the hand truck and basket, causing them to fall. The employee sustained a left femur fracture.",1
A powered pallet jack was being pushed down a hallway. An employee stepped into the hallway and was struck by the jack and thrown to the floor. The employee suffered a head injury.,1
"An employee was using a crane with a plate dog clamp to move a steel beam. The clamp lost its hold on the beam, causing the beam to fall onto the employee's left foot. The employee had surgery.",1
An employee was cleaning out a pouch machine when it clamped around her left thumb. She sustained a partial amputation to the thumb.,1
"An employee was operating a shavings mill machine that cuts tree logs into wood chips. The machine's sensor eye slipped from position and the employee stepped onto the cart full of logs to fix the sensor. The machine turned on, shifting the log cart and the employee slipped forward and grabbed the cables to catch himself. The cables pinched the employee's fingers and hand against the rotating pulley, resulting in multiple finger amputations on both hands.",0
"An employee was rigging the front of a heavy armored vehicle to offload from a railcar. The employee's right middle and index finger were caught between the rigging hook and the vehicle's engine cover latch hook, causing the amputation of flesh from both fingers.",0
"An employee was descending a fixed ladder on a stick machine. The employee fell off the ladder to the concrete ground about 5 feet below, suffering a broken and dislocated left elbow.",1
An employee was operating a pallet jack to move pallets into a freezer when a lift struck the employee. The employee sustained bilateral lower leg fractures and was hospitalized.,1
"An employee was using a high-speed pneumatic sander to cut the rubber bumper stop of a tractor. The disc shattered, causing the shrapnel to lacerate the employee's left arm.",1
"An employee suffered apparent heat stroke while cleaning the inside of a 12,000-gallon asphalt trailer tank. The employee experienced cramps and was hospitalized for dehydration, heat stroke, and a heat-related muscle injury.",1
"An employee was secured in a boom lift basket bolting purlins on a roof when the building collapsed, causing a rafter to strike the employee. The rafter caught and overturned the boom lift. The employee fell to the ground, resulting in a left distal femur fracture, facial fracture, and brain hemorrhaging.",1
"An employee was cleaning when they tripped and fell onto the floor, resulting in a left knee injury.",1
"On November 1, 2022, an employee was cleaning a roll coating machine when her cleaning rag and right hand became caught in the rollers. The employee sustained a right middle fingertip amputation.",0
"An employee was installing underground primary wire while in a bucket lift truck. When a connection was made to a transformer, the wire arched employee was shocked and suffered second- and third-degree burns to the left arm and right hand.",1
"An employee was in a prolonged seated position while wiring a receptacle box. Upon standing up from this position, the employee experienced sharp pain in their back caused by a herniated disc.",1
"An employee was operating a skid steer with dirt in the bucket. The skid steer drove over uneven ground, causing the bucket to tilt forward and hit the ground. As a result, the employee's head struck the bar on the front top part of the cab. The employee sustained a compression injury to the neck and upper back that included two injured vertebral discs that required surgery.",1
"An employee was winching a load on the back of a tractor trailer. The lash came off, and the forward momentum caused the employee to fall into a pothole. The employee's right leg was broken in two places.",1
"An employee was on an extension ladder, installing cable from a pole in an alley. The employee fell from the ladder to the ground and suffered a broken left arm.",1
An employee was walking down the hallway when they slipped on a liquid and fell to the floor. The employee sustained a right patella fracture that required surgery.,1
A building maintenance employee was found in the parking lot disoriented with a laceration to his forehead. The employee was hospitalized.,1
An employee was caught in a winder machine while loading it. The employee suffered a broken arm and ribs.,1
"An employee was arranging shingles on a residential roof. He fell about 25 feet to the ground below, landing on his right leg and suffering a broken ankle.",1
The employee was operating a log loader machine when it caught on fire. The employee suffered smoke inhalation.,1
"An employee reached up to shut the bin door on a truck. The door failed to latch properly and fell back, crushing the tip of the employee's right thumb.",1
"On November 2, 2022, an employee was securing a return recycler pump to a pallet for shipping. As she was lining up a bracket with the dunnage bolt hole of the manufacturer's packaging, the pump shifted and caught her left little finger against the dunnage. The fingertip was amputated.",0
"An employee was trying to retrieve pouring instructions from a mold. She was pinned between the mold and the ""jacket"" (the mechanism that grabbed the mold).",1
Oil and gas employees were working with casing strings when a side door elevator's door came open and struck an employee. The employee was knocked down and sustained a rib and collarbone fracture as well as other small fractures. The employee was hospitalized.,1
An employee was exiting his truck when he twisted his ankle on its ramp. He suffered a sprain.,1
"An employee's leg was resting on a conveyor belt when the belt was powered on. The employee's foot moved forward on the belt and their knee pressed against the guide bar, resulting in an ankle fracture.",1
"On November 2, 2022, at the first floor loading dock, the injured employee and two co-workers lifted a trash cart onto a dumpster. The weight shifted in the trash cart and the injured employee's left middle finger got caught between the trash cart and the dumpster. The fingertip was amputated without bone loss.",0
"An employee was cutting short ribs using a bandsaw. As the employee was using a pusher plate to make final cuts, the employee's right index finger slipped and contacted the sawblade. The finger was amputated.",0
A sport utility vehicle drove into a marked roadway work zone and struck an employee. The employee suffered a concussion and a possible collarbone injury.,1
"On November 3, 2022, an employee was using a front-end loader to load construction debris onto a tractor trailer. The front-end loader's radiator cap came off and the radiator shot hot coolant onto him, causing him to jump from the cabin to the concrete floor about 3 feet below. He suffered a broken right leg and was hospitalized.",1
"An employee was using a worm-drive saw to cut plywood when the saw kicked back, partially amputating his left ring finger.",0
"An employee was ratcheting down a hay feeder onto a pallet when an object gave way, causing the ratchet handle to strike them in the head. The employee sustained a skull fracture on the left side from the temple to behind the ear.",1
"An employee was wrapping a pallet on a rotating shrink wrapper. Upon grabbing the pallet, their thumb was pinched between the pallet and the machine, resulting in an amputation to the tip of the right thumb.",0
"An employee was on a roof reattaching his lanyard to the next beam when the concrete slab he was working on broke, causing him to fall approximately 12 feet through a roof tile to the ground. The employee sustained leg and vertebrae fractures.",1
"An employee was removing a trench protective system by attaching a sling from above the trench to the panel eye hook. The hydraulic shoring system was not holding pressure, causing the employee to fall 18 feet into the trench. He sustained a back injury, a right wrist fracture, and rib fractures.",1
"An employee tripped on the edge of a stored pallet in a warehouse, fell to the floor, and suffered a broken hip.",1
"An employee was using a broom to sweep the stairs in a stairwell. She fell from the second-to-last step onto the landing about 14 inches below, suffering a head laceration, an injury to her right thumb that required stitches, and a left knee injury.",1
"An employee was delivering automobile parts to a shop when they tripped over parts on the shop floor and fell, resulting in a right hip fracture.",1
An employee was preparing to put up a light pole near a powerline when an arc flash occurred. The employee contacting the light pole received an electric shock.,1
"An employee was using a torch to remove an existing filter drier from a condensing unit before installing a new one. The old filter drier exploded and the employee sustained injuries and burns to the face, jaw, eye, arms, and shoulders that required hospitalization.",1
"An employee was painting from a combination ladder configured as a straight ladder. The ladder slid backward, causing the employee to fall and suffer two broken ankles.",1
"An employee was polishing a shaft using sand paper on a drill press. The employee's glove was caught in the drill press, resulting in an amputation to the left ring finger and torn tendons in the left index finger.",1
"An employee was assisting a team member in aligning two sections of a mold when his finger became caught between the two sections. The employee's finger was crushed, resulting in a right index fingertip amputation.",0
"On November 11, 2022, an employee was riding in a golf cart during a team-building exercise when the golf cart struck a tree. The employee sustained a hip fracture.",1
"An employee was inspecting a car for a bent tire rim. The employee's finger became caught between the rim spoke and the caliper, resulting in amputation of the fingertip.",0
An employee was using an air-operated automatic ball valve on a pail filling line to package 55-gallon drums of product when they sustained an amputation to the tips of their left middle and index fingers.,0
An employee was operating a table saw when three of their fingers were amputated by the saw blade.,1
"An employee was talking to a coworker regarding issues that a machine was having. The employee placed his finger on the machine when a key pinched his finger against the holder, resulting in an amputation to the left index finger pad.",0
"An employee was rotating tires on a vehicle that was elevated to chest height. As the employee rotated the wheel on the hub of the car, the employee's finger became pinched between the brake caliper and the spoke of the wheel. This resulted in a laceration and fracture to the left index finger.",1
An employee was unclogging rice hulls from a machine. The machine's rotary valve amputated the pad of the employee's left middle finger.,0
"An engineering technician was testing an electrical panel when an arc flash occurred, resulting in burns to the arm and hand.",1
"On November 3, 2022, an employee was working on the elevated platform of a boiler truck approximately 20 feet off the ground near live powerlines. A piece of equipment came in contact with the live line, creating an arc flash. The employee sustained electrical burns to their hands and abdomen.",1
"On November 3, 2022, an employee was operating a drill press to make holes in a wood plank. The employee's gloved hand was pulled into the machine, resulting in a tendon injury and fractured left index finger. They were hospitalized and had surgery.",1
"On November 3, 2022, an employee was working in the receiving/shipping area. The employee was adjusting the tension of a conveyor belt while standing near a stairwell. The belt broke, causing the employee to fall approximately five feet onto the second step of the stairwell. He was hospitalized for rib fractures and a hand laceration.",1
"An employee was shutting down at the end of a shift when he noticed dust was jamming his machine. When the employee cleared the jam, his fingers made contact with the rotary airlock blade, resulting in the amputation of the middle finger right below the fingernail and the ring fingertip.",0
"An employee was carrying a pail of adhesive on a scaffold when they fell approximately 10 feet to the ground, sustaining a clavicle fracture that required surgery.",1
"An employee was cleaning out a conveyor belt chute when the hinged access door fell, striking the employee's right hand. The employee sustained a crushing injury to the hand and a laceration to the palm.",1
"An employee was working from 6 feet off the ground during a roof-building project. He fell through the ceiling; his chest hit a beam as he fell, and after he landed, a sander fell through the ceiling onto him. He was hospitalized, having suffered a broken sternum and five broken ribs.",1
An employee was taking measurements from a scaffold to fabricate and install an insulation cover on a boiler system. A nearby 1/2-inch screw pipe with a pressure transmitter broke and sprayed the employee with hot boiler feed water. The employee sustained burns to the back of their legs.,1
"An employee was using a hand truck to move an ergonomics mat. The employee tripped over the hand truck, fell, and fractured a knee cap.",1
"An employee was repairing a cooling fan on a truck. The fan blades started moving again and caught his left hand, amputating the middle fingertip and displacing and fracturing another fingertip.",1
An employee was clearing a jam in a baking mold press when their hand became caught. The employee was hospitalized for a wrist sprain and hand injury that required stitches.,1
"While cleaning a conveyor, a temporary employee came into contact with a drive wheel on the conveyor's chain and sprocket. The employee required surgical amputations to the right ring and little fingers.",0
An employee was walking behind a cash register and tripped over a coworker who was kneeling. The employee fell on the floor and sustained a hip fracture.,1
"On November 3, 2022, an employee suffered an abdominal hernia while lifting a heavy object. The employee was hospitalized.",1
"A maintenance employee was troubleshooting a packing machine. As the employee reached underneath the machine, the machine jaws closed on the employee's finger, resulting in a thumb amputation.",1
"An employee was grinding a gusset plate with a disc grinder when the gusset got caught, pulling the employee's finger into the machine. The employee sustained an amputation to the right index finger.",0
"An employee was performing an emergency exit drill on a school bus. As she was exiting the rear of the bus through the emergency door, she slipped and fell to the ground, suffering a broken leg.",1
"An employee was standing on a lift about 15 feet in the air to prepare the ceiling to be painted. When reaching over the duct work, the employee lost his balance, falling onto the duct work and to the floor. The employee sustained an elbow injury.",1
"An employee was on a concrete column 10 feet from the ground. As the employee began to tie-off and reposition, he stepped backward and fell onto the concrete below. The employee sustained three lumbar vertebrae fractures and a fractured sternum.",1
A forklift operator was making a right turn and struck a corner wall. The employee sustained a heel fracture and a laceration that required stitches.,1
"An employee was helping to load and unload a trailer. A telehandler was backing up to pick up a load when the employee's right foot and leg was pulled under the tire of the machine, resulting in a fracture of the foot, leg, and pelvis.",1
"An employee was loading empty pallets on a trailer. He slipped on the outside dock and fell backward; his leg was caught between the dock and the trailer. An electric pallet jack then ran over his leg, resulting in a femur fracture.",1
"On November 3, 2022, an employee was tightening a bolt when the torque wrench slipped and struck the employee in the eye. The employee was hospitalized and had surgery.",1
"An employee was walking into a building when they tripped and fell to the floor, causing an arm and jaw injury.",1
"An employee was standing on a containment skid that was approximately 26 inches above lower level, when a forklift struck the skid. The employee fell to the floor and sustained a knee injury.",1
"An employee was on a roof retrieving a piece of plywood. The employee pushed the plywood over a 1.5 foot parapet wall, causing the employee to fall over six feet to the ground with the plywood. The employee sustained bilateral leg fractures.",1
"An employee was providing oversight to an excavator as it was placing steel plates over a trench box. High winds caused the steel plate to torque and strike the trench box spreader. The plate bounced back and struck the employee, causing a tibia fracture, laceration to the lower leg, and dislocation of the elbow.",1
"An employee was using a sander. The employee's right middle finger contacted the cutter head, causing an amputation.",0
"An employee was using a pallet jack to receive packages from a truck. The employee lost their balance and fell from the dock to the ground below, suffering broken ribs and head trauma.",1
"An employee was working with a mold machine. As he leaned toward the machine, a utility knife held in his hand was pushed into his stomach. He was hospitalized.",1
"An employee was dumping materials into a dumpster when the skid steer loader tilted forward against the dumpster. The employee's hand became caught between the skid steer loader and the dumpster, resulting in a laceration and crush injury to the left middle and ring fingers and an amputation to the middle finger.",1
"An employee was working in a distribution center when a conveyor ramp dropped onto their right foot, resulting in the amputation of two toes.",1
"An employee was unclogging a steel pipe oil line with an air tank. The oil line fitting ruptured, causing the employee to sustain a laceration to the left forearm and right side of head. The fitting then sparked and created a flash fire. The employee sustained first-degree burns to the face and second-degree burns to both arms.",1
"An employee and a co-worker were drilling holes in a concrete abutment to add reinforced steel. The employee set the drill in position and informed the co-worker to start the drill when the employee's right glove was caught in the drill bit, resulting in a thumb amputation.",0
An employee contacted energized power cables and suffered burns to the hands and face.,1
"On November 3, 2022, a baker was scraping batter in the hopper of a cake mixer. The mixer pulled in the baker's right hand, its blades causing amputations to the tips of the middle and ring fingers.",0
"An employee was torch cutting a six-foot steel pipe when a piece broke off and fell onto his right foot, resulting in an ankle fracture with bruising and swelling.",1
"An employee was driving an all-terrain vehicle to inspect a well. The vehicle struck an uneven surface, ejecting the employee from the vehicle to the ground. The employee sustained bilateral leg fractures.",1
"An employee was helping load a pallet of tile into a customer's truck when the cases of tile shifted and fell off the pallet, striking the employee and resulting in a broken ankle.",1
"An employee was using a pneumatic pulley to raise a load to the upper level. The employee's glove became caught, causing the employee's hand to get pulled into the pulley. The employee's thumb was amputated.",1
"On November 4, 2022, at approximately 2:00 PM, an employee was in a truck-mounted aerial lift obtaining measurements of a sign. A gust of wind blew the tape measure into the overhead powerline, causing the employee to sustain electrical burns to the left fingers and palm and the left shoulder. The employee also sustained lacerations to the abdomen. The employee was hospitalized.",1
"An employee was performing set-up tasks on a machine. As the employee began to adjust the pitman arm of the machine, they came in contact with moving parts, resulting in two fractures in the left hand.",1
"A nurse was tending to patients when her feet became entangled in a hose, causing them to trip and fall to the floor. The employee sustained a left elbow fracture.",1
An employee was clearing a jam in a mulch chute on a grinder machine when the interlock fan turned on and the employee was struck by a fan blade. The employee sustained an arm laceration and fracture.,1
"An employee was reattaching a wire onto a pulley system when the employee's little finger became stuck in the pendant attached to the pulley, resulting in a partial amputation.",1
"An employee was using a lift table to raise a cover plate into position underneath a railcar. The employee was holding onto the edge of the plate with their right hand when their right index fingertip was caught between the plate and the bottom of the railcar, resulting in an amputation to the first knuckle.",0
"An employee was climbing a 32-foot fiberglass extension ladder to get onto a roof. When the employee was a little more than halfway up the ladder, the fiberglass cracked and the ladder failed. The employee fell onto the deck below, resulting in fractures to both heels.",1
"On November 4, 2022, an employee was removing pizza dough from under the production line when their hand was pulled into a conveyor roller. The employee sustained a left forearm fracture.",1
"An employee was feeding a roll of plastic through a machine. While she was tugging on the plastic, it broke, causing her to fall backward to the ground and suffer a broken femur.",1
"On November 4, 2022, an employee was unclogging a line near a hot melt tank. The molten metal in the tank contacted the employee, resulting in burns to the torso, neck, and arms.",1
"An employee was using a forklift to rearrange merchandise in a warehouse. As he was walking around the back of the forklift, the employee slipped on hydraulic fluid that leaked from the vehicle and fell to the floor, resulting in a femur fracture.",1
"An employee was moving a section of brick from a quality control inspection table/conveyor. The brick turned in her hand and wedged between the conveyor and a metal strut. Her right little finger was pinned between the brick and the strut, and the fingertip was amputated.",0
"An employee was speaking to coworkers when a customer approached the employee regarding what was being said. The customer became agitated. The employee attempted to de-escalate the situation and asked the customer to step outside. Once outside the customer assaulted the employee, resulting in a nasal fracture, laceration to the nasal bridge, contusion, and a headache.",1
"An employee was standing on a step stool to sort pickles on a moving wire conveyor belt. The employee's finger became stuck in a hole of the conveyor belt, striking a cross piece. The employee's right little fingertip was amputated.",0
Two employees were moving a concrete block to get a pallet from under it. The concrete came down on one employee's left index finger and amputated the tip just above the first knuckle.,0
"An employee was working on bike repairs when their hand struck the disk brake, resulting in an amputation to the thumb.",0
"An employee was changing the oil on a hydraulic hoist when the hoist rotated, causing the employee's right index finger to become caught in the hoist and amputated below the first knuckle.",1
"An employee was cleaning the tooling of a plastic molding machine. The molding machine closed on his left hand, resulting in the amputation of the left index and middle fingers. The employee was hospitalized.",1
"An employee was trimming a tree while in a backyard bucket lift. The bucket, with the employee inside, descended to the ground, causing the employee to sustain fractures to the lumbar vertebrae.",1
"An employee was grating the bottom of a 12-foot deep excavation that contained three benches. Vibrations from nearby traffic caused the first bench to collapse and strike the employee at the knee. The employee then tripped and fell to the second bench and struck his shoulder, resulting in a fracture. The employee was hospitalized.",1
"An employee was standing on a ladder that was leaned against a garage opening. A door struck the ladder, causing the employee to fall 10 feet on to the ground. The employee sustained fractures.",1
"An employee was using a 14-foot ladder to access a roof panel when the employee fell 14 feet to the ground below, resulting in a fracture of the T6 and T7 vertebrae.",1
"An employee was working on the parking brake for a piece of equipment when the 60-pound tension plate on the parking break released, striking the employee and causing him to stumble backward and fall. The employee suffered a broken leg that required hospitalization.",1
"An employee was walking down a stairwell when they slipped on a pair of discarded latex gloves, causing the employee to fall down a flight of 11 stair risers. The employee sustained contusions.",1
An employee was stocking items at a grocery store when she tripped or slipped and fell on the floor fracturing her wrist.,1
"An employee was walking up the steps to put her lunch in the lunchroom. The employee stepped on the top landing of the stairway and lost her balance. She leaned against the wall, slid down the wall, and fell onto her buttocks. She sustained a hip fracture and was hospitalized.",1
An employee was working on an electrical panel in a boiler room when an arc flash occurred. The employee sustained burns to the upper body.,1
"An employee was lifting a chili pot out of a hotel pan filled with hot water on a grill. The hotel pan tipped over and spilled hot water onto the employee's right foot, resulting in burn injuries.",1
"An employee was on a ladder installing lighting on the ceiling of an office area. The employee was using pliers and a wire stripper to apply pigtails when he came in contact with an energized wire on the pigtails. The employee received an electric shock, causing him to fall off the ladder. He sustained right hand electrical burns and left rib fractures.",1
"An employee was repairing a pack installation under tension. Upon pushing the pack, the employee sustained a left calf strain and was hospitalized.",1
An employee was walking to a chip tunnel when they slipped on metal grated steps that were wet from the rain and fell to a lower level sustaining a fractured left knee.,1
An employee was performing maintenance on an electrical panel when an arc flash occurred. The employee sustained burns.,1
"A maintenance employee had just replaced a non-idler shaft roller on a conveyor and noticed an issue with the tension roller. While putting pressure on the belt and roller to make adjustments, the energized conveyor belt caught his hand between the roller and the belt. The employee sustained a forearm fracture and laceration.",1
"An employee was trying to unclog a pressurized oil supply line when a flange blew off the pipe and struck the employee, resulting in intestinal injuries.",1
"An employee was vacuuming drums into a hopper and stepped away while a nearby steam drum was being blown down to control level. Upon returning to the task, the employee stepped into an unguarded trench that contained hot water and sustained bilateral first and second-degree burns from the thighs to the toes.",1
"An employee was operating a forklift. While taking a corner, the employee's hand became caught between the cab enclosure and the material racking, resulting in three broken fingers and an amputation of the middle finger.",0
"On November 4, 2022, at approximately 8:30 AM, an employee was walking in the warehouse area when they were struck by a forklift traveling in reverse. The employee sustained a possible foot fracture and was hospitalized.",1
"An employee was flagging traffic in a work zone when a vehicle entered the work zone, striking the employee. The employee sustained a leg fracture and a concussion.",1
"An employee was working in a three-man crew to stage loads for shipment. As a steel column was being put into place with a forklift, the employee positioned himself between two steel columns and was struck by a steel plate that was welded to the column. The employee sustained an arm fracture and contusions to the right thigh.",1
"An employee was preparing to power off the AC unit of an apartment complex. As the employee stepped from the ladder onto the roof, he slipped on a patch of ice on the roof and fell to the ground. The employee was hospitalized.",1
An employee was lubricating a concrete mixer when they were struck by an energized paddle. The employee sustained lacerations and a fracture to the forearm.,1
An employee had an asthma attack after being exposed to floor stripping and waxing chemicals. The employee was hospitalized.,1
An employee was washing a golf cart when they tripped over the hose and fell to the ground. The employee sustained rib fractures.,1
"An employee was operating a brake press to flatten a piece of metal when their left hand contacted the die on the brake press, resulting in amputations of the middle and ring fingers at the second joint.",0
"An employee was removing masking skin from a work panel when the masking skin tore, causing the employee to lose their grip and fall backward, landing on a rack behind him. The employee sustained a contusion to the lower back and was hospitalized.",1
"An employee was using an electric winch to remove a 200-pound screen during scheduled maintenance when a piece of rigging broke and struck the employee in the face, resulting in lacerations and fractures to the nose and face.",1
An employee was picking up a fallen tote when their finger was caught in a conveyor belt and amputated.,0
"A road maintenance employee was helping to pick up lane closure equipment while in the basket of a truck. As the basket on the back was raised from the lowered position, the employee's right foot became stuck between the frame of the box truck and the frame of the motorized personnel basket. They sustained four fractures to the right foot.",1
An employee was walking to the parking lot to meet a customer when a gust of wind caused the employee to fall to the ground. The employee sustained a hip fracture that required surgery and hospitalization.,1
"An employee was walking while carrying a tray to the dish room when they slipped or tripped and fell to the ground, resulting in knee pain and a broken hip.",1
"An employee was working with large wax die when their fingertip was caught between the top and bottom of the die, resulting in an amputation.",0
"An employee was operating a tractor with a rotary cutter to clear a gas pipeline. As the tractor was driving down a steep hill, the vehicle rolled over multiple times. The employee sustained fractured vertebrae and a fractured left arm.",1
"An employee was driving a skid steer down an unimproved road when the vehicle hit an ice patch, left the roadway, and rolled downhill several times. The employee jumped from the skid sheer and was crushed by the vehicle at the bottom of the hill, resulting in multiple rib fractures as well as injuries to the legs, neck, and lungs.",1
"An employee was climbing down from a truss when he stepped down into an uncovered pit, catching himself but suffering an abdominal strain that required hospitalization.",1
"An employee was removing a belt from a motor on an extruder when his finger was pinched by the belt, resulting in an amputation to the first knuckle.",1
"An employee was undergoing a construction-related training session. As the employee maneuvered near a pole between balconies that were situated on a tower, they fell 10 feet to the ground below, resulting in a fractured arm and pain in their lower back and ribs.",1
"An employee was assisting with rigging up a derrick. He was at the back end of the rig when he grabbed a bar with his right hand. As the rig was going up, his right hand went under the tail screw, which crushed his little finger, resulting in amputation.",0
"A temporary employee was using a forklift to stack pallets onto racks when his clipboard fell into the mast area of the forklift. The employee reached into the area to retrieve the board and his body actuated the carriage. His right arm got caught between the installed plexiglass and the carriage, resulting in a laceration to the forearm below the elbow.",1
"An employee was preparing to move an extrusion bundle of steel, which was on a cart. The bundle tipped onto one side and crushed, lacerated, and fractured the employee's hand. The employee was hospitalized, requiring surgery.",1
An employee was using an air hammer when a piece of metal struck their eye.,1
"On November 7, 2022, an employee was bending a piece of a one-inch galvanized steel conduit with his hands, using an X-frame for leverage. The conduit slipped, causing his left ring finger to become caught between the conduit and the X-frame. The employee's left ring fingertip was amputated without bone loss.",0
"An employee was stringing a new conductor with an existing conductor when their right elbow contacted an energized phase (7,200 volts) and their left elbow contacted the bottom of the arrestor. The employee suffered electrical burns.",1
"At about 2:50 p.m. on November 7, 2022, an employee was guiding a backhoe while another person operated it. The operator lost eye contact with the employee and someone yelled at him to stop the backhoe. At the same time, the employee tried to get away from the back of the backhoe, leaned on a handrail around the underground tank they were building, and fell through the rail to the bottom of the tank about 10 feet below. The employee suffered injuries to the spine and left hand.",1
An employee was standing on a telehandler platform to finish a pole building. The employee reached to grab nails when he lost his balance. The employee fell 12-feet through the railing on the platform to the ground.,1
A plate struck an employee's foot just below the ankle and above the steel-toe section of his boot resulting in a fracture.,1
"A crane was being used to lift a steel roll. The roll swung and hit an employee, crushing his pelvis against another steel roll.",1
"An employee's hand was caught in the gears of a machine engine, resulting in an amputation of the left hand.",0
An employee was unloading a barrel of antifreeze from the back of a trailer. The employee fell from the back of the trailer to the ground and suffered a broken hip and leg.,1
"An employee was operating a CNC router when their hand contacted the router blade, resulting in an injury and possible amputation.",1
"An employee was pressing pyrotechnic composition into pellets using a pressure tablet press. Upon pouring the composition into the small hopper, the composition ignited and produced a flash fire. The employee sustained bilateral burns to the hands and face.",1
"An employee was assisting in placing a slip sheet under an overturned pallet containing bread. When lifting the cases of bread, the employee sustained an annular tear to two lumbar vertebrae.",1
An employee was crossing a parking lot when they were struck by a vehicle that had turned into an exit lane. The employee suffered abrasions and dislocations to their left ankle and right hip.,1
"An employee was under a truck checking its brakes. The truck was moved and struck him, breaking and lacerating his right leg.",1
"An employee was assisting in servicing a batter depositor machine as a maintenance technician worked on the control panel. The employee's hand was caught in the rotary valve as the machine cycled. The employee suffered a laceration to the middle finger through the bone, which resulted in surgical amputation of the fingertip.",0
"An employee was completing work orders from a computer located in the boiler room. The employee began to experience nausea and pain in the legs. The employee was found sitting in a chair, unresponsive; they were hospitalized for carbon monoxide poisoning.",1
"An employee attempted to retrieve a fallen product from the roller area of a conveyor when their right arm got caught in the conveyor, resulting in multiple arm fractures.",1
"An employee was assisting to lift and set a stacker machine that had fallen onto its side. The employees were lifting the stacker with a come-a-long winch attachment affixed to the forklift. When the machine was attached to the rigging equipment, the machine shifted, causing the stacker to move. The employee's right middle finger was then caught between the stacker and the wooden counter balance beneath the stacker, resulting in an amputation of the right middle finger.",0
"An employee was using a bandsaw to cut tubes that were clamped in place. The employee heard one of the tubes move and, as she turned around to see what was going on with the saw, her right index finger went between the blade and the partially cut tubes, resulting in a partial amputation.",0
"An employee was on the third step of a 6-foot fiberglass ladder when a nearby forklift containing a boom attachment and 7-foot beam, struck the ladder. The employee fell to the concrete ground.",1
"An employee was opening a pressurized fuel cargo tank lid when the lid flew off and contacted their left hand. The employee suffered a laceration on the middle finger, as well as an avulsion of the index finger that resulted in a surgical amputation of the fingertip.",1
"An employee was approaching a fenced-in job site. The gate to the job site was stuck in the closed position and several employees attempted to open it. As the gate opened, the injured employee's left ring fingertip was amputated.",0
"An employee was operating a slitter machine with a wrap roll of steel mesh. The employee's gloved left hand became caught in the wrap roll, which pulled his hand into the roll and lifted his body off the floor, resulting in hospitalization for two broken bones in the left forearm.",1
An employee was stripping meat when a rack of meat tipped over and struck the employee in the shoulder and head.,1
An employee was operating an overhead crane to pick up a steel beam when their finger became caught between the chain and the beam. The employee sustained a crush injury to the finger.,1
"An employee was on a ladder removing an actuator from a shelf. While descending the ladder, the actuator slipped from the employee's hand, causing him to fall to the ground and onto the floor. The employee sustained rib fractures.",1
"On November 7, 2022, an employee was unclogging a feed mill when the airlock cycled and amputated the employee's right index and middle fingers.",1
"At about 10:30 a.m. on November 7, 2022, two employees were holding a wooden wall in a standing position. As they released the wall and went to grab their tools, the wall fell onto one of the employees, striking them in the head. The employee was hospitalized.",1
"An employee was cleaning under a stove that was on casters. A wheel shifted and rolled into a floor drain in front of the stove, causing a pot of boiling water to tip onto the employee's back, which resulted in second degree burns to their back.",1
"An employee was moving office supply boxes in the back of a supply truck when his back seized up, resulting in an injury that caused back pain.",1
An employee was cleaning a sconce when she received an electrical shock to her left hand. The employee was hospitalized.,1
"An employee was clearing an area for mowing. While using a cutting tool, the employee came into contact with a cable guide wire attached to a utility pole. The employee's right arm was amputated between the shoulder and the elbow.",1
"An employee was walking down the stairs when he missed a step and fell, resulting in injuries to his ribs and T4 vertebra, as well as a punctured lung.",1
A employee was building wood furniture frames when their pneumatic staple gun shot twice and the employee was struck with a staple that was 1.5 inches long. The employee was hospitalized.,1
"An employee was placing a pipe into a pipe flaring machine when the vice clamp was activated. The employee's fingers became caught, resulting in a partial fingertip amputation.",0
"An employee was securing a roll of conveyor belt with tape. The employee pushed the end of the tape onto the belt. The belt pulled the employee's hand between the belt and a separator bar, crushing the employee's right forearm and resulting in swelling that required hospitalization.",1
"An employee was using a laminator machine to make a splice. The splice began coming apart and the employee reached for it, resulting in a crush injury and fractures to the right arm. The employee was hospitalized and had surgery.",1
The injured employee was loading cardboard material into a machine. A forklift that had a lifted stack of cardboard on it was nearby. The stack fell over a barrier and onto the employee. The employee was knocked to the ground and sustained a hip fracture.,1
An employee was trying to clear a jam in a compactor machine when he suffered a leg amputation.,1
"An employee was walking into a freezer to perform maintenance when they slipped on ice on the floor and fell, resulting in a fractured femur.",1
"An employee was helping to move a drainage structure across a work zone. The drainage structure was rigged to an excavator and the hook became caught on the linkage of the drainage structure. The hydraulic bucket cylinder continued to move, causing the hook to stretch and the clevis to break. The chain snapped and the clevis struck the employee, resulting in a right shoulder fracture.",1
"On November 8, 2022, at approximately 3:30 PM, an electrician was on a ladder to replace a pendant on a hoist when the employee contacted a powered terminal and was shocked by 460 volts of electricity. The employee then fell off the ladder and was hospitalized for a burn and fracture.",1
"An employee was cutting paper on a flat cutter machine when his hand became clamped by the machine, resulting in a fingertip amputation without bone loss that was surgically reattached.",1
"An employee was operating an order picker. The vehicle reversed and struck a rack, causing a stack of skids to shift toward her left leg. The employee sustained a compound leg fracture.",1
"On November 8, 2022, at approximately 4:30 PM, a photographer was walking back to the imaging base in the rain. The employee stepped onto the blacktop crosswalk where he slipped and fell onto his left knee. The employee sustained multiple abrasions on the left knee.",1
"An employee was on a storage rack moving merchandise when they lost their balance and fell to the floor, resulting in a concussion.",1
"An employee was cutting wires from bales of paper for recycling. A stack of paper fell on the employee's leg, resulting in inflammation and contusions of the leg and knee. The employee was hospitalized.",1
"An employee was assisting in the relocation of a CNC machine inside a facility. The machine was placed on skate rollers and the employee's finger became caught underneath a skate roller, resulting in the amputation of the left middle fingertip. The employee was hospitalized.",1
"An employee was performing maintenance when his right ring finger was crushed, resulting in medical amputation.",0
"An employee tripped and fell to a hallway floor, suffering a broken right kneecap.",1
An employee was operating a meat cutter machine and suffered a finger amputation.,1
"An employee was removing meat from a packing machine when their sleeve got caught in the conveyor roller. The employee's hand and arm were pulled into the machine, resulting in a fracture to the hand and arm. The employee was hospitalized.",1
"An employee was cleaning in a basement tunnel near a conveyor belt when they noticed that the belt had stopped. Upon investigating, the employee's leg became entangled between the belt and tail pulley, resulting in contusions/abrasions to the leg.",1
An employee was put in a choke hold by a client.,1
"An employee was driving a forklift from the training area to the parking area when they collided with a nearby storage rack. The employee's arm was caught between the rack and the forklift, resulting in lacerations and fractures to fingers on the left hand.",1
"An employee was assisting to empty a feeder. When rotating the sleeve, the employee's finger made contact with the rotating helix, resulting in an amputation to the right index finger.",1
"An employee was driving a high-lift reach truck around a pole while behind another lift truck. The employee lost his balance and hit the pole, causing his left leg to get caught between his lift truck and the pole, resulting in a leg fracture.",1
An employee was on the roof of a facility replacing a blower when the employee fell approximately 20-feet through a roof opening to the facility floor. He sustained lacerations to the head.,1
"An employee was closing a steel bi-fold cover. The cover fell and caught the employee's fingertip, causing a partial amputation to the finger.",0
"An employee was installing a fastener to a mold when a support plate slipped and the mold fell from a hoist onto the employee's hand, resulting in a crush injury of the right hand fingers.",1
"An employee was moving a light fixture when a wire nut fell off, leaving live wires exposed. The employee contacted the wires and was shocked.",1
An employee was spotting for a skid steer operator. The employee moved to readjust the load onto the forks and made contact with the skid steer tracks. The employee sustained bilateral leg and ankle fractures.,1
"An employee was driving a powered industrial truck down an aisle to his work area when he collided with a stopped cherry picker, resulting in an injury to his left shin.",1
"At about 11:30 a.m. on November 8, 2022, an employee was using a meat saw to cut bone parts. The blade struck the bone, causing the meat to move. The employee's left thumb came in contact with the blade of the saw, amputating the tip.",0
An employee was condensing boxes in a trash bin. The employee jumped out of the trash bin and sustained a fractured left leg.,1
An employee was tacking up a radial arm on a welding jig when her hand was pinched between the jig housing and part when the clamp activated. The employee sustained a crush injury to the right hand and amputation of the right little and ring fingers.,0
"An employee was on top of the flatbed trailer helping to secure a 72-inch earth drilling auger that had been placed by a co-worker. A separate, 96-inch earth drilling auger was placed with the square base over asphalt paving in order to rig the other auger through the lifting eyes and load it onto the flatbed trailer. The larger auger tipped over and the blades caught the employee's fingers against the pavement, resulting in a laceration to the right middle finger that required surgical amputation several days later.",1
"A crew was performing temporary asphalt placement when the walk-behind pavement roller they were using ran out of gasoline. The injured employee went to refuel it with gasoline when a fire occurred, causing the employee to sustain burns to the head, neck and chest, and hand.",1
An employee was clearing a jam in a machine and amputated their index and middle fingertips.,0
"An employee was moving the porcelain portion of a capacitive voltage transformer into a steel bin using a forklift with lifting straps. The transformer slipped off the forklift and crushed her right hand, which required surgery. She also sustained a right shoulder fracture.",1
"On November 9, 2022, an employee was using a spud bar to separate a bundle of steel bars when he felt a pain in his lower back. The employee suffered a lower back sprain.",1
"On November 9, 2022, a load of septic tank halves, lifted by a forklift, fell when the lifting straps broke. They landed on an employee's left arm and broke it between the elbow and the shoulder.",1
An employee was descending a step ladder when he contacted a pry bar that was in the ground next to the ladder. The employee sustained a laceration to the leg and buttocks.,1
"An employee was standing beside a mini excavator, helping it pull fiber. He slipped and attempted to right himself. His left hand got caught on the excavator track, amputating the tip of his little finger at the first joint.",1
An employee tripped and fell while walking indoors. The employee suffered a knee injury and a hand laceration.,1
"An employee was operating a rod shear. His right hand was caught by a sprocket in the tower area hold-down, and he suffered partial amputations to three fingers.",0
"On November 9, 2022 a technician was assisting in the installation of a vehicle engine. When standing underneath the lifted vehicle, a metal particle fell into the employee's eye, resulting in hospitalization.",1
"An employee had completed a duct leakage test in an attic. While they were descending the attic access ladder from the attic platform, the frame of the ladder detached and collapsed under him, causing him to fall to the floor below. The employee sustained fractured vertebrae of the lower back.",1
"An employee was loading plastic parts into an extruder machine when their finger became caught by the feed screw, resulting in amputation of the right index fingertip.",0
"An employee was loading materials into a truck when the employee slipped and fell onto the ground, resulting in a leg fracture.",1
"On November 9, 2022, while troubleshooting a furnace, a bit was pushed from the pre-heating dome and fell to the cart below, striking the injured employee and pinning his left leg between the cart and the bit. The employee's left ankle was fractured and required surgery. The employee also sustained burns to the right hip and thigh, left ankle, and right hand.",1
"An employee was working near a 36,000-pound powered industrial truck when they were struck by its tire. The employee was hospitalized for bilateral ankle fractures.",1
Two employees were handling a gun when the injured employee was shot in the knee.,1
"An employee's right hand was caught in a brake press when it activated. The employee's index, middle, and ring fingers were crushed from middle knuckle to fingertip, and the employee suffered amputations to all three fingers.",1
An employee was assisting in the repositioning of an industrial freezer when their right ring fingertip became pinched between two freezers. The fingertip was amputated.,1
An employee was helping forge a piece of titanium on an open die hydraulic forging press when a 2-by-2 piece of the titanium broke off and struck the employee in the arm. The employee sustained a laceration to the right arm and was hospitalized.,1
An employee was cleaning the ink chamber of a printing press when the blade in the chamber amputated the employee's right index fingertip.,0
"An employee was using a hand truck to transport a toilet down a driveway. The toilet fell off the hand truck and shattered. As the employee was picking up the broken pieces, a piece lacerated his left hand. The employee was hospitalized and had surgery.",1
"An employee was stepping down from the main body of a mobile hydraulic scaffold to the outrigger boards. The employee tripped, fell to the ground about 6 feet below, and suffered a broken leg. The employee was hospitalized.",1
"On November 9, 2022, at approximately 9:20 PM, an employee was preparing a trailer for loading. The employee was adjusting the dock plate when it came down, catching the employee's right hand against the trailer bed and amputating the index fingertip.",0
"On November 9, 2022, at 9:40 a.m., an employee performing estimation duties was descending a roof via an extension ladder when he missed a rung and fell 6 feet to the ground below, resulting in injuries to his left leg.",1
"An employee was operating a hedge trimmer to trim a bush. While clearing a branch out of the way, the employee's left little finger became caught in the hedge trimmer, resulting in amputation of the finger.",0
"An employee was loading tree branches into the back of a garbage truck when the employee's left arm became caught in the compacting area of the truck, resulting in two fractures of the left arm.",1
An employee was using a circular saw to cut wood and lacerated their left thigh.,1
An employee's finger was caught in the pinch point between the support and an existing piece of steel while the structural support was being lifted out of the structure.,0
"An employee was repairing a metal roof when he stepped onto a piece of 2-by-4 lumber that was temporarily nailed in place. The employee fell approximately 25 feet through the roof framing to the ground, sustaining a fractured wrist, cheek bone, and pelvis. A fall harness was not worn at the time.",1
An employee was harvesting turf grass. The harvester he was using caught his shirtsleeve with its brushes and broke his arm.,1
"On November 9, 2022, an employee was cutting a wooden frame using an automated double miter saw. The employee was struck by the saw blade and his right index fingertip was partially amputated.",0
"An employee was carrying a pot of hot water and noodles from a stovetop to a sink. He slipped and fell, and the hot water burned his arms, face, neck, head, and chest.",1
"An employee was placing a nut on a 600-pound saw blade to secure it to a hydraulic lift. The blade slipped and the employee reached for it, sustaining a laceration to the right leg and a fractured fibula.",1
"An employee was tying columns at floor level. The employee developed cramps, became ill, and was hospitalized, suffering from heat-related dehydration.",1
An employee was inserting liquid into a machine that packages the liquid into a squeezable packet when the employee's right index fingertip was amputated.,1
"An employee was using a meat grinder when their hand became caught in the machine, resulting in the amputation of four fingers.",1
"An employee was installing hook bolts in a restoration hole. A pickup truck struck the employee, breaking his right hip.",1
"An employee was walking behind a machine when they tripped over the cord and fell to the floor, resulting in a femur fracture.",1
"An employee was walking down a hallway when they stepped out of the way to allow someone to pass. The employee was then struck by a linen cart, resulting in a herniated disk.",1
"An employee was working to get inside an office that was locked. He used a ladder to climb up through the ceiling and then positioned himself above the locked office. He grabbed an aluminum beam/stud for support, but the beam cut his hand. The employee let go of the beam and fell from the ceiling onto a desk and then fell to the floor. The employee sustained a head injury from falling and also sustained a laceration to the arm and hand.",1
"An employee was cutting a board with a hand saw when the saw kicked back and contacted their left wrist, resulting in a laceration.",1
"On November 10, 2022, an employee was walking within a pedestrian path when a forklift veered onto the path. The employee was struck by the forklift, resulting in a fractured left tibia, fibula, and foot. The employee was hospitalized.",1
"Two employees were changing a die on a casting machine, about 8 feet above the ground. One of them bumped into a guardrail while standing up straight; it came out of its bracket and the employee fell to the ground, sustaining a fractured hip.",1
"Two employees were setting up a traffic control zone while another stayed in an attenuator truck. A vehicle entered the zone and collided with the back of the truck, and the employee inside it suffered a back sprain.",1
"At about 3:00 p.m. on November 10, 2022, an employee was trying to remove a blockage in a liquid transfer line. The liquid splashed onto the employee's right arm, causing burns to the bicep.",1
An employee was using an A-frame step ladder to set up a stage for a performance. The employee fell approximately five feet off the step ladder onto the floor. The employee sustained a left hip injury requiring surgery.,1
"An employee was adjusting the cable of a crane when the line became tight and pinched his right middle finger, resulting in amputation.",1
An employee tripped and fell from a roof to the ground 15 feet below.,1
"An employee was cleaning the line at shift change when she noticed a piece of chicken hanging from the drip pan underneath the incline conveyor. The employee went to remove the piece of chicken and contacted the belt, resulting in a partial left thumb amputation.",0
"An employee was standing on a ladder to replace a cable line from a pole to a residential property. They were hooked to the old cable line when the line snapped, causing the employee to fall approximately 12 feet to the ground. They sustained a skull fracture.",1
"An employee was using a 2-by-4 to loosen deck post shores to strip a wooden deck. After striking a post, the employee pulled back, causing him to strike his hand against a metal column behind him. The employee sustained a crush injury to the right ring fingertip.",1
"A crew was on a drilling floor making a drill pipe connection. One employee was using a 5-foot bar with the pipe tongs, to apply pressure, to make the pipe fitting tight. The bar slipped and struck the employee in the chest, resulting in rib fractures to the right side.",1
"An employee was deburring a steel plate when the plate shifted and landed on the work bench, compressing the employee's left thumb and amputating the tip.",1
An employee was unloading a cart when his right index finger contacted the forks of a forklift. He sustained a laceration to the bone.,1
"A bus driver was exiting the bus when his finger became crushed in the vehicle door, resulting in a fingertip amputation.",0
An employee was climbing down a ladder. He fell at the second rung from the bottom and fingers on his left hand were caught in the machine he had been cleaning. He suffered partial amputations to those fingers.,1
An employee was using a metal shearing machine to cut brass when his glove became caught in the machine. The employee sustained a partial fingertip amputation to the right thumb.,0
"An employee was using a hand truck to move a 7-foot-tall cabinet. The cabinet fell onto the employee's right leg, resulting in a fracture.",1
"An employee was on a ladder hanging a display sign on the ceiling of a store. While descending the ladder, the employee lost his balance and fell off the ladder. He sustained a head laceration and brain hemorrhage.",1
An employee was de-escalating a behavioral incident involving a patient. The patient became aggressive and began pulling the employee to the ground by their hair. The patient kicked the employee in her chest and stomach. The employee became dizzy and fainted. The employee was hospitalized for blunt trauma.,1
"On November 10, 2022, an employee had finished work in a telecommunications manhole. As he was lifting the front edge of the manhole cover onto the raised lip of its metal ring, his left middle finger became caught between the cover and the ring. The finger was partially amputated.",0
"Two employees were carrying a five-piece bundle of 1-inch-thick, 20-foot-long metal bars. An employee fell and the bundle fell onto their hand, crushing the middle fingertip and removing the nail from the ring finger. The employee's middle finger was broken and amputated.",0
"An employee was in the basket of an aerial work platform pressure washing a shaker roof. While rotating the wand, an unexpected pressure release occurred. The wand was one inch from his right knee and injected him with fluid at 2,900 PSI.",1
"On November 10, 2022, an employee was cutting frozen pork femur bones when their right thumb contacted the band saw blade and was amputated.",0
"An employee was operating a riding lawn mower inside of a construction zone on the highway before new asphalt was laid. A vehicle entered the closed lane, striking the employee. The employee sustained blunt force trauma to the body, abrasions to the arms and back, lacerations to the head, and an open leg fracture.",1
An employee was closing the door on a rail car when it amputated his middle and ring fingertips.,0
"A stack of compressed carboard bales fell over onto an employee. The employee was hospitalized for fractures to the right arm, shoulder, and femur, as well as crush injuries.",1
"A temporary employee was clearing a piece of jammed wood from a machine when his left hand made contact with the moving blade, resulting in a middle finger amputation and a lacerated ring finger.",1
"An employee was moving a portable grinder machine for cleaning when his right little finger became caught between the wheeled grinder and the electrical panel on the wall, resulting in an open fracture that required surgery.",1
"An employee was tightening a bolt with an extension wrench. The wrench slipped and struck him in the right eye, resulting in an eye injury.",1
"An employee was repairing the throttle on the engine of a welding machine. The wind blew panels on the machine shut, and the employee's right hand contacted the blade of the engine's fan. The employee suffered a partial amputation to the index finger.",0
"An employee was using a grinder to cut a piece of metal. When the piece was almost entirely in the machine, the employee struck the piece with a hammer. The loose piece clamped onto his hand, resulting in a partial amputation of the left finger.",0
An employee's foot caught on the corner of a pallet as he turned. He fell backward and his back and head struck the floor; he sustained a neck vertebra fracture.,1
An employee was siphoning fuel from a vehicle in the maintenance garage when a fire broke out around the two vehicles. The employee sustained second and third-degree burns to the front of his legs and arms.,1
"An employee was removing a large hose from a rental compressor. The hose fitting was fastened tightly, and he was unable to remove it easily. The hose fitting then fell on the employee's left middle finger, resulting in a fracture.",1
"An employee was operating the outriggers of a truck from a kneeling position on the truck bed. The rear outriggers on the left side of the truck crushed the employee's foot, causing the amputation of two toes.",1
"An employee had been stocking items on the top of a shelf using a top stock cart. As she descended from the cart, she missed the last step and fell to the floor. She suffered a broken hip and was hospitalized, requiring surgery.",1
"On November 11, 2022, a temporary employee was operating a metal shear machine and amputated their right thumb and index fingers.",0
"Three employees were disposing of a 10-foot mirror in a dumpster. Once the mirror had been tossed into the dumpster, an employee struck the mirror to break it; it shattered, and a piece lacerated an employee's abdomen. The employee was hospitalized.",1
"An employee was walking around the store when they slipped and fell onto the floor, resulting in a right knee dislocation.",1
"An employee was removing a pigging tool from a receiver barrel on a natural gas pipeline. When he opened the receiver door, residual pressure in the vessel (caused by plugged blowdown valves) caused the door to strike his left leg and break his left femur.",1
"An employee was setting up to paint. When stepping onto the edge of the scaffolding from the 2nd or 3rd step of a ladder, the ladder shifted, causing the employee to fall about 4 feet. He landed on his side on the top stair and was hospitalized for three fractured ribs and a possible bruised spleen.",1
Employees were working in a kitchen area near a dishwasher. A leak in a gas line caused an employee to suffer carbon monoxide poisoning.,1
"An employee was operating a brake press when their finger was caught in the machine, resulting in an amputation.",0
An employee was troubleshooting an electrical part on lighting parts at the entrance of a facility. The employee fell from a 9-foot ladder onto the floor. The employee was hospitalized and had surgery for fractures of the skull and back vertebrae.,1
An employee was unbolting and removing a steam valve for inspection when they were splashed by the hot condensate. The employee sustained burns to his face and upper body.,1
"An employee was walking between a truck tailgate and a wellhead cellar to retrieve a well test chart. He slipped in the mud and fell eight feet into the cellar, resulting in a concussion, skull fracture, and forehead laceration.",1
"A temporary employee was handling the intensifier bar with a hoist; a strap was around the support for the hoist. Another employee was helping him maneuver it to get it into the blender. The injured employee's hand made contact with a sharp hook as he pulled his hand toward him, resulting in a puncture wound to the top of his hand.",1
"An employee was delivering automobile parts when he tripped over an extension cord, causing him to fall to the ground. The employee sustained injuries to both knees. The employee underwent surgery and was hospitalized.",1
"An employee was operating a powered pallet jack when it struck a rack, crushing their ankle between the rack and vehicle. The employee sustained a right ankle fracture.",1
An employee was cleaning up debris from the ground floor at a work site. A 3-foot steel bar was kicked off a scaffold 12 feet above and fell onto the employee. They were hospitalized for a laceration and fracture of the left hand.,1
"An employee was walking through a hydraulic fracturing work site performing manual fueling operations. As they were walking, the employee slipped on a chemical known as SAFE-BFH-2 (High pH Buffer) and fell to the ground. Their right lower back, bilateral legs, and bilateral lower hip areas contacted the chemical and the employee was hospitalized for chemical burns.",1
An employee was driving a forklift when their leg struck a store display and was fractured. The employee was hospitalized and required surgery.,1
"An employee was climbing an extension ladder when it slipped outward, causing the employee to fall to the ground. His ankle was broken in three places.",1
"An employee was walking down the steps after leaving the production office when they missed a step and fell down six metal steps onto the landing in the production area. The employee sustained a right rib fracture, collapsed right lung, and a back contusion.",1
A board was jammed in an infeed conveyor. An employee was investigating when a light barrier was activated and started the conveyor. The injured employee was pinned against a machine frame and sustained lacerations to both shins.,1
"On November 12, 2022, an employee was helping to move a bundle of boiler tubes. As the sling was being reset, a bundle of steel tubes dislodged from the wall mount, striking the employee in the head. The employee sustained head injuries.",1
"An employee was walking through a produce department. The employee tripped on a produce case corner guard, fell to the floor, and suffered a broken hip. The employee was hospitalized.",1
"An employee was pushing an empty metal skid onto a skid conveyor. His right index finger was pinched between the skid and the skid holder, and the fingertip was amputated.",0
"An employee was walking between rows of staged catering carts that were near a pallet of wet ice when she slipped on a plastic bag. The employee fell onto the floor and sustained injuries to the back of her head, right arm, and back.",1
An employee was restraining a resident from breaking a window. The resident and employee fell backward and the resident fell on the employee's ankle. The employee was hospitalized for a fibula and ankle fracture.,1
"An employee was working from an extension ladder in a back yard, disconnecting an aerial telecommunications cable line from a house. The employee fell backward from the ladder to the grass below, suffering fractured vertebrae in their back.",1
An employee was clearing a jam from a process line when his right middle fingertip was amputated by the airlock. The machine was not locked out at the time.,1
An employee was walking down the hallway when she fell onto the carpeted floor. The employee was hospitalized for a hip fracture and had surgery.,1
An employee was preparing a salad using a knife. The knife amputated the employee's fingertip.,0
An employee was positioning wood on a table saw for cutting when their index finger was struck by the rotating saw blade. The employee's finger was partially amputated and was later surgically reattached.,0
"A crane mechanic was unlocking a stuck twist lock on a crane spreader when the tip of his left thumb was pinched in the twist-lock mechanism, resulting in an amputation.",1
"An employee was scanning paper rolls and directing powered industrial trucks in a warehouse. A nearby forklift struck a 6,800-pound paper roll, causing the roll to strike the injured employee. He was knocked to the ground and sustained left toe fractures that required hospitalization.",1
"An employee was operating a gas-powered cutoff saw to cut a clay pipe when the saw bound up and kicked back toward the employee, striking him in the mouth. The employee sustained a cheek and jaw laceration and was hospitalized.",1
An employee suffered compression fractures to two back vertebrae while removing luggage from an overhead rack on a bus. She was hospitalized.,1
An employee was removing nuts from an extraction line flange under a turbine. The hydraulic line ruptured and hydraulic fluid punctured the employee's palm.,1
"An employee was cutting pork tenderloin with a band saw. A piece of bone became stuck and upon loosening it, the employee's right thumb came in contact with the blade. The employee sustained a partial thumb amputation.",1
"An employee was trying to enter an aft cargo pit on an aircraft using an aircraft chock to gain more height. He tried to jump into the pit but did not succeed; his legs then swung under the fuselage and he fell backward, landing on his back on top of the chock and the ramp. He suffered a partially collapsed lung and two broken ribs.",1
"An employee was operating an injection molder feeder when the hopper became clogged. The employee began to clear the jam when the machine cycled, causing her hand to become pinched between the plastic plates. She sustained a fingertip amputation.",1
"An employee was running a piece of wood through a jointer. The wood kicked back, causing amputations to two of the employee's finger pads.",0
"An employee was pulling pre-forms out of wall racks when approximately nine racks fell onto the employee, resulting in a right fibula fracture.",1
"An employee was lowering a dock plate before loading a truck when their right middle finger was crushed by the dock plate, resulting in a partial amputation.",0
"A waste vehicle driver was attempting to stop a vehicle from rolling when the vehicle tire rolled over her leg, resulting in fractures.",1
"A security employee was struck by a patient in the emergency department, resulting in a nasal fracture. The employee was hospitalized for surgery.",1
"An employee was rinsing a barrel that contained an acidic chemical down a drain. Bleach from a mop bucket was emptied down the same drain, creating chlorine gas. The employee inhaled the gas and was hospitalized for chest tightness, difficulty breathing, and shortness of breath. The employee was hospitalized.",1
"An employee was driving a golf cart on a golf course. As he dragged a tree branch with a rope in his left hand, the rope became entangled in the wheel of the cart and amputated three of his fingers.",1
An employee was preparing to place a concrete wall for a basement structure. The employee was standing by the bucket truck and reached to disconnect the wall from the truck when the bucket came down and pinned the employee's arm between it and the concrete wall. They sustained an amputation of the left arm.,1
"An employee was working in the condensation department where coils are built. The employee pressure tested a coil when the copper pipe connection released and struck the employee in the hand and jaw, resulting in fractures.",1
An employee was returning from their break when the rags in his back pocket contacted a nearby stove heater. The rags caught on fire and spread to the employee's clothing. He sustained third-degree burns to the left and right buttocks.,1
An employee was bending over to pick up a fuel hose when they experienced a sharp pain in their back. The employee was hospitalized.,1
"An employee was lifting metal tubing with a crane when one of the lifting chains became caught on a wooden block sticking out from under a tube. The load shifted, and a tube fell from a stack of bundled tubing onto the employee resulting in fractures to their jaw, arm, and leg.",1
"On November 14, 2022, at 1:30 p.m., an employee and co-worker were removing fuses off of military projectiles. The employee's left hand was on a projectile as the co-worker applied the locking mechanism on the weapons vice to hold the projectile in place. The employee's hand got caught in the weapons vise, resulting in a crushed little finger and a partial surgical amputation of the finger.",1
"An employee was walking down the stairs of a job-site single-wide trailer to exit when he fell onto the asphalt adjacent to the stairs. The employee sustained cuts and scrapes on both knees and the right forearm that required surgery, and contusions on the right side of the ribs.",1
"On November 14, 2022, at 1:50 PM, an employee was adjusting a brake press when it actuated and amputated their left index and middle fingertips.",0
"An employee was moving 17-pound boxes when the employee fell to the ground, resulting in a fractured hip.",1
"An employee was transferring product on a conveyor belt. Upon reaching for a product, the employee's hand became caught between the cleat on the conveyor belt and the top guard, resulting in a fingertip amputation.",1
"An employee was working on a vehicle suspended in a frame machine. As he tightened a frame clamp, the clamp pinched his left palm near the thumb.",1
An employee was stocking dog beds when he fell from the second step of a step ladder to the floor. The employee sustained contusions and a strain to the lower back and chest wall.,1
"An employee was loading vaults onto delivery carts. After hooking the hoist up to the vault, the employee pulled the hook down to the frame of the trailer. The employee's finger became caught between the hoist and the guard of the winch, resulting in an amputation of the tip of the thumb.",1
"An employee was connecting the lines between a semi trailer and a tractor. He fell from the trailer to the ground, breaking his left femur at the hip.",1
An employee was unjamming a machine when the machine blades amputated her right middle and ring fingers at the first knuckle. The machine was guarded at the time.,1
"An employee was stacking lumber when their hand contacted the belt and pulley system that is part of the chain. The machine started, resulting in a right index fingertip amputation. The machine was unguarded at the time.",0
"On November 14, 2022, at approximately 6:25 PM, an employee was exiting his garbage truck when he fell to the pavement, resulting in a right ankle fracture.",1
"An employee was performing maintenance on one end of a paper machine. As the employee walked away from that part of the machine, a nip point on another part of the machine caught the employee's right-hand fingers and crushed them. The employee's middle and ring fingers were medically amputated.",0
"A temporary employee was helping a forklift driver secure a hay bale with a hook. The hook came off while the forklift was setting the bale down, struck the employee in the right eye, and lacerated the employee's eyelid and the area under the eye.",1
An employee was repairing a garage door while on a wooden pallet that was lifted by a forklift. The overhead door came down and struck the employee or the pallet causing the employee to fall about 7 feet to the concrete floor of the shop. The employee sustained fractures to both wrists.,1
"An employee was on an extension ladder, changing the lightbulb of an exit sign in a school gymnasium. The employee finished and started to go down the ladder when his feet slipped causing the ladder to slide inward. The employee fell to the floor with the ladder. The employee sustained fractures to the right heel, left foot, and one or more vertebrae.",1
An employee was using a track ladder to access a shelf when they fell onto the concrete floor. The employee sustained a head injury.,1
"An employee was standing on a ladder, approximately 4 to 5 feet off the ground, pulling siding off a building. As the employee was pulling on the siding, he lost balance and fell onto the sidewalk, resulting in a broken wrist and dislocated elbow.",1
"An employee was on the lift gate of a straight truck, working to unload equipment at a storage facility. While a lab machine was being lowered on the lift gate, it tipped over and landed on the employee fracturing both of their legs.",1
"An employee was helping to move a four-drawer file cabinet. The top of the cabinet was tilted toward his co-worker. The injured employee then squatted to lift the bottom of the file cabinet from the base to adjust the cabinet. As the injured employee began to lift, he felt his weight shift and felt pain in his left leg. The lift was stopped, and the injured employee fell. He sustained two fractures to the left fibula.",1
"An employee was using a rebar bender that was attached to a table. While operating the bender, the table moved, which caused the employee's left fingertip to be crushed. The employee's fingertip was amputated.",0
"An employee was attempting to rig a heat exchanger for removal from the site. A steel shaft was placed across the face of the heat exchanger's tie bolts. Mechanical jacks were then used to lift the heat exchanger so a pallet jack could be put underneath it. The steel shaft slipped out, causing the heat exchanger to fall forward onto the employee, pinning him under it. The employee sustained fractures to vertebrae, ribs, and an ankle.",1
"On November 15, 2022, at approximately 1:00 PM, an employee was walking to the breakroom to take his lunch break when he stopped to talk to a co-worker. The employee was then struck by a forklift and sustained a right foot injury that required surgery.",1
"An employee was changing rams in a blowout preventer on a snubbing unit. A nearby co-worker handed the employee a block when it slipped and fell onto the employee's left little fingertip, resulting in amputation.",0
"An employee's foot became caught in a chair, causing her to fall to the floor. The employee sustained fractured arms.",1
"An employee was dismantling a pickup truck on a four-arm shop lift. The front passenger side arm was not secure to the vehicle. When putting weight on the rear driver side, the front passenger side elevated and released from the lift, causing the vehicle to fall and strike the employee. They were hospitalized for a fractured vertebra and rib.",1
An employee was working on a truss production line when they were caught by a truss that was going into a press. The employee sustained multiple fractures.,1
An employee was installing an air conditioning unit on a semi-truck when their left thumb became caught in a pulley and the thumb tip was amputated.,0
"On November 15, 2022, an employee was using a pole to clear a jam of raw materials in a hopper. The pole was pulled into the hopper along with the employee's hand, which became caught between the moving conveyor belt and the hopper chute. The employee's left middle finger was partially amputated. The employee also sustained a laceration to the ring ringer, and contusions.",0
"An employee and a trainer were completing a training activity with a trailer and a tractor. The trainee performed a pull test by moving forward to ensure that the trailer was hooked onto the tractor. The trainer was standing at the cab between the trailer and the truck. As the trainee pulled forward to test the brakes, the trailer slid forward into the fifth wheel, crushing the trainer’s right foot.",1
Two employees were using a pressure washer. One employee held the sprayer while the injured employee stood next to the pressure washer machine. The pressure washer exploded and the employee standing next to the machine sustained first-degree burns to the left side of the face and a ruptured left ear drum.,1
"An employee was driving a tug on the service road. When he turned right, the tug struck an aircraft chock and then struck a belt loader that was parked at a gate. The employee was ejected out of the tug and struck the ground, sustaining a broken femur and tibia, and a laceration to the left leg.",1
"An employee was cleaning spills around a quart seamer when their arm became entangled in the machine, resulting in an amputation to the right distal forearm.",1
"A employee was reaming a cast aluminum part in the grinder when her glove became caught in the machine, resulting in a compound fracture to her left index finger.",1
"An employee was assisting a bridge crane to lower a section of a 10-foot mold onto another section of mold. When lowered, the molds did not align. Upon checking for an obstruction that was causing the misalignment, the mold slid onto the employee's fingers. The employee sustained a crush injury and amputation of the middle, ring, and little fingertips.",0
"On November 15, 2022, an employee was delivering mail on her mail route when she experienced an asthma attack.",1
"An employee was using a portable grinder with a cutting wheel attachment to cut a steel tube. As the employee was cutting, sparks flew from the grinder and his shirt caught on fire, resulting in second-degree burns.",1
A sanitation employee was performing a deep clean on a blanching machine when the rollers pulled the employee's right arm into the machine. The employee sustained a fractured right arm.,1
An employee was completing training tasks with a trainer. The employee entered a nearby paint booth during operation when his finger was amputated by a tension belt on the intake fan.,0
"An employee was inside a trailer at customer warehouse helping unload pallets. The employee slipped and fell off the trailer onto the ground, resulting in a right wrist fracture.",1
An employee sustained a gunshot wound to the leg in a road-rage incident.,1
"An employee was rolling down the side curtains of a flatbed trailer when the handle of the revolving cover began spinning rapidly, striking the employee on the thumb. The employee sustained an amputation to the tip of the left thumb.",0
"An employee was using a step ladder to put merchandise onto a shelf when she lost her balance and fell off the ladder, landing on the floor. The employee sustained a fracture to the left hip and was hospitalized.",1
"On November 15, 2022, at approximately 9:25 p.m., an employee was walking to her work station when she stepped on an antifatigue mat. The mat slipped out from under her, causing her to fall and fracture her knee.",1
"An employee was loading traction bands across a roller when their right hand was caught in the roller, resulting in fractured fingers.",1
"A derrickman was positioned in a rod basket to remove a rod elevator. After doing so, the employee began wiping the rod with a rag and the rag became entangled around the rod. The employee's glove was caught in the rag, resulting in a degloving injury that resulted in medical amputation of the left little finger.",1
An employee was installing a steel plate on a mezzanine when they fell 13 feet through the opening to the ground. The employee sustained rib and wrist fractures.,1
"An employee was helping to seal a grain storage bunker to prepare for fumigation. He was using a battery powered nail gun to fasten plastic sheeting on the side of the bunker when the nail gun misfired and a nail struck the employee in the left side of the chest, resulting in a puncture wound.",1
"An employee was stabilizing a crate that was falling from a forklift. The crate fell and struck the employee in the face and lower body, resulting in a right ankle fracture.",1
"On November 15, 2022, at approximately 10:15 p.m., an employee was attempting to reposition a one-man lift while fixing a dock door. The employee fell off the dock to the concrete ground, and was hospitalized with a broken hip, left shoulder, and elbow.",1
"An employee was emptying a tip hopper full of waste into a dumpster when the tip hopper rocked back onto his left index finger, resulting in a left index finger fracture.",1
"On November 16, 2022, an employee was preparing to use a hydro-jetting machine that was frozen. The employee removed the nozzle and placed the hose on the floor to begin unblocking the hose. Upon turning on the machine, a pressure buildup in the hose released and the hose struck the employee's face. He sustained facial fractures and was hospitalized.",1
An employee suffered back and shoulder injuries while moving a heavy bag stand.,1
"A mechanic was opening a door for a production blast freezer to allow it to defrost. When the door had been secured, the employee stepped out from behind a column and was struck by a forklift, resulting in a right leg fracture.",1
"An employee was placing roof paper on a roof when they fell thirty feet to the ground. The employee sustained a concussion, fractures, and internal injuries.",1
"An employee was using a pencil grinder equipped with a cutting wheel to enlarge an opening for an LCD display in a steel access door. The cutting wheel shattered and a fragment struck the employee in the face, resulting in a laceration to the right cheek and a fractured tooth. The employee was hospitalized.",1
"An employee was using a battery operated drill with a wire brush to clean a copper fitting. The employee's glove was caught in the wire brush, resulting in a fracture to their left middle finger.",1
"An employee was repositioning slabs of brick on a conveyor after noticing they were coming out of the pusher area sideways. While adjusting the slabs, a slab of bricks fell onto the employee's right index finger, resulting in amputation.",0
An employee was lowering the concrete chute on the mixer truck when his right hand was crushed in a pinch point that resulting in an amputation.,0
An employee was cleaning dunnage and debris from an open dock area when they were struck by a forklift. The employee sustained bilateral leg injuries and was hospitalized.,1
"An employee was up in the bucket of a truck in order to move a connecter on a power line that was being repaired. The employee was between the neutral line and one of the primary lines when he received an electrical shock, resulting in the amputation of his left arm.",1
"An employee was on a scaffold laying bricks when they fell 30 feet to the ground below, sustaining fractures to the right arm and left wrist.",1
"An employee was prepping a hopper that was being welded. An auger was still in operation under the hopper and metal plates were placed onto the auger to secure it. The employee was placing fire blankets down when one of the plates shifted and created an opening to the auger. The fire blanket that the employee was standing on was caught in the auger, pulling the employee into it. The employee was hospitalized and their left leg was amputated.",1
"An employee was installing overhead air supply lines when he stepped onto a 2x4 ceiling nailer of an office that was under construction. The employee fell eight feet through the ceiling and onto the floor, sustaining two lumbar vertebrae fractures and a rib fracture that punctured his lung.",1
An employee tripped over a pallet and fractured her hip. The employee was hospitalized.,1
"An employee was using a joining machine to join two sections of a wood frame when her left middle finger was struck by the joining mechanism, resulting in a fingertip amputation.",0
An employee was placing a case onto a pallet when they tripped over the corner of the pallet and fell to the ground. The employee sustained a hip fracture.,1
"An employee was setting up a hydraulic auto-clamp machine to clamp a door. While holding the corner piece with the left hand and maneuvering the clamp with the right joystick control, the machine closed. The employee's left index finger was pinched, resulting in amputation.",0
"An employee was attaching a trailer coupler to a trailer hitch on the truck when their finger became caught between the coupler and hitch, resulting in an amputation of the right index finger.",0
"An employee was working in a mill control room on a stationary mounted ladder. As he was ascending the ladder, he slipped and fell to the ground, resulting in fractures of the left arm and three left ribs.",1
"A temporary employee was working as a mechanic to fix a sauce depositor machine. While testing the tension on a chain and sprocket, the employee's left index and middle fingertips were amputated.",0
"An employee was drilling a hole when the drill bit became stuck. The employee grabbed the bit to pull it out and the drill activated, resulting in amputation of their left little fingertip.",1
"An employee was cleaning a paint sprayer when a substance from the paint sprayer was injected into his left hand resulting in inflammation, infection, and hospitalization.",1
"An employee was changing rotten wood on the back of a flatbed truck when he fell from the flatbed onto the ground, sustaining a lower left leg fracture that required surgery.",1
An employee was driving a rock loader downhill when the brakes failed. The vehicle struck an embankment and the employee was hospitalized with fractures to the right arm and nose.,1
"An employee was wiping grease and clearing a jam from an auger when the blade dislodged, resulting in a broken right hand.",1
An employee was exiting an aircraft when he fell onto his back and slid down five rubberized aircraft steps. The employee sustained a rib fracture and contusions.,1
"On November 16, 2022, an employee was standing on a forklift that was lifted when he fell and sustained a broken arm.",1
"An employee was working on a mud press when the filter leaf cloth seal leaked hot slurry. The mixture contacted the employee, causing second-degree burns to the lower back, abdomen, and buttocks.",1
"A maintenance employee was making adjustments on a banding machine when their hand came in contact with the cutter head, resulting in a fingertip amputation. The machine was guarded at the time.",0
"On November 16, 2022, at 10:00 a.m., an employee and two co-workers were working on a concrete deck 20 feet in the air. One of the co-workers went to retrieve blueprints. The injured employee and the other co-worker tried to make an adjustment while they were waiting, when the injured employee fell 20 feet to the dirt ground below, resulting in an injured hip, broken ribs, and a broken leg and nose.",1
"On November 15, 2022, an employee was carrying a trash bag outside to put in a dumpster when they tripped and fell. The employee sustained a wrist fracture that required surgery.",1
"An employee was repairing an overhead door spring. The spring bracket broke and struck the employee's right hand, resulting in a fractured right thumb and hand lacerations.",1
"An employee was standing behind a trash truck after bending over to pick up a piece of debris. City employees were emptying a roll-cart into the back of the trash truck. When the empty roll-cart was lowered back to the ground, it struck the ground with enough force to dislodge from the mount on the back of the trash truck and bounce away from the truck, striking the employee. The employee was knocked to the ground, resulting in a concussion and a head laceration.",1
"An employee was loading 55-pound ballast bricks into a space on a submarine with help from a co-worker. The co-worker passed a brick to the injured employee when it fell onto the employee's left ring finger, pinching it against a steel bin. The employee sustained a compound fracture of the left ring finger.",1
A temporary employee was using a powered spindle to sand and clean part of a machine when his glove became caught in the threaded rod as it was spinning. The employee's fingertip was amputated.,1
"An employee was escorting campers to their campsite. While walking toward a golf cart, the employee tripped over a landscape timber and fell. The employee sustained a laceration to the right side of the head, a fractured right hip and two fractured fingers.",1
"An employee was performing maintenance on an air actuated valve. As the employee was fixing the connection between the airline and the valve, 35% HCL began to leak. The employee was hospitalized from chemical inhalation/ingestion.",1
An employee was walking down a hallway when she slipped on liquid that had leaked onto the floor from a garbage bag. The employee fell on her left side and was hospitalized with a fractured left femur.,1
"An employee was setting up a boring mill machine when her finger became caught between the rotating table and metal plate, resulting in a partial amputation of the left middle finger.",0
"An employee was walking to the processing area when she was struck by a forklift carrying stacked pallets. The employee fell to the floor. The forklift then reversed with the employee caught on the pallet, causing her to be dragged by the vehicle. She sustained a fractured left ankle.",1
"As part of a training, an employee was snowboarding on a ski trail. Upon making a left turn, the employee lost traction with their toe edge and fell forward onto their left shoulder. The employee was hospitalized for a fractured left clavicle and had surgery.",1
"An employee was preparing to weld a steel beam that was on work horses in front of him. The employee used a wireless control to retract the sling of a crane back to the safe position. The sling snagged an angle iron that was attached to the beam, causing the beam to topple over and push the employee backward into a stack of steel. He then fell to the floor and the beam landed on his lower right leg, resulting in fractures to the tibia and fibula, and a laceration to the back of the head.",1
"An employee was adjusting glass panes and moving materials. The weight of the glass panes put pressure on the employee, causing them to step in a way that caused an ankle fracture.",1
"An employee was climbing up a ladder when he grabbed the back of a boom truck. The boom truck seat released backward, causing the employee to fall from the top of the ladder to the pavement below. The employee sustained a fractured hip.",1
"An employee was moving a box that was jammed when their hand got caught on the sharp outer edge of the machine guard, resulting in an amputation of the left thumb tip.",0
"An employee and a co-worker were cleaning a packing machine. The employee was putting a bucket on the conveyor belt when the belt advanced and the employee's right index finger was caught in a pinch point, resulting in a fingertip amputation.",0
"An employee was exiting a building when they missed the last step and fell off the stairs onto the ground, resulting in an ankle fracture.",1
"An employee was walking into the building for work when she slipped on ice in the parking lot and fell, resulting in an ankle fracture.",1
An employee was troubleshooting a sawmill sorter from underneath the machine when they sustained an amputation of the right thumb at the first knuckle.,0
"On November 17, 2022, an employee was directing a tow truck driver who was backing a vehicle into a parking space when the employee's left hand contacted an electric security fence. The employee sustained an electric shock and was hospitalized.",1
"An employee was in a bucket truck performing repairs on a radio tower when the arm on the bucket truck was retracted. The employee began to step out and onto another step of the bucket truck and fell approximately eight feet to the ground, sustaining a vertebra fracture of the back.",1
"An employee was working in the press box area picking up loose cotton. The press box was activated and caught the employee's right wrist, resulting in a fracture.",1
"An employee was exiting the building when they slipped and fell down the exterior stairs, resulting in a knee fracture.",1
"An employee was cleaning the hold containment kit area when he was exposed to a liquid, possibly sodium hydroxide. The employee sustained chemical burns to the right knee and shin and was hospitalized.",1
"An employee was on a ladder cutting tree branches. After cutting a branch, it swung down and struck his ladder. The employee lost his balance and fell approximately 15 to 20 feet to the snow-covered ground. He sustained rib fractures, a collarbone fracture, and a collapsed lung.",1
"An employee was preparing the metal extrusion for stretching when the operator lifted it into position. The employee's finger became caught in the extrusion pinch point area, causing an amputation to the right fingertip.",0
"An employee was replacing film on equipment when their left middle finger contacted the film guide, resulting in an amputation just below the nail.",1
"An employee was using a high-pressure hose to wash a tank. The valve at the end of the hose broke due to the pressure, causing the hose to then strike the employee in the throat. The employee sustained severe injuries to the pharynx and neck.",1
An employee was securing materials for transport on a roof when they tripped over a skylight and fell 15 feet through the opening onto the concrete floor. The employee sustained a skull fracture.,1
"An employee was working at the saw table to cut metal tubes. Once the tube was completed, the employee removed it. The tube slipped from the employee's hands, causing it to bounce off the floor and strike the employee's left hand. They were hospitalized for fractures of the middle, ring, and little fingers.",1
"An employee was scraping the windshield of the company work car when she slipped on the icy ground and fell, resulting in a pelvic contusion.",1
An employee was clearing a jam from a bacon-slicing machine when their finger was amputated.,1
"On November 17, 2022, an employee slipped on a wet floor and fell on his left side. He was hospitalized.",1
An employee was lubricating a motorcycle's chain. The chain and sprocket caught his fingers and amputated a fingertip.,1
"An employee was getting lunch in the cafeteria when she tripped over the leg of the chair and fell to the ground, resulting in a hip fracture.",1
"An employee was in a homeowner's attic when he took a step on a truss board. The board gave way, causing the employee to fall through and land on the garage floor. The employee sustained a fractured vertebra.",1
"On November 17, 2022, an employee was operating a electric-powered pallet jack in a warehouse when his foot became caught between the pallet jack and an adjacent metal rack, resulting in multiple fractures to his right foot. The employee was hospitalized.",1
"An employee was picking up a section of a storage rack when the rack moved, pinching the employee's finger between the rack and the ground. The employee's left index fingertip was amputated.",1
"An employee was working on an aircraft when he lost his balance and fell to the ground, striking his head. The employee sustained a concussion and was rendered unconscious; he was hospitalized.",1
"An employee was working near a stack of tree logs while clearing the ground. A log that was stood up on its side near the pile fell and rolled onto the back of the employee’s left lower leg, resulting in a fracture.",1
"An employee was loading a bag onto a conveyor and tucking shrouds onto pallets when his right ring finger got caught between the pinch point on the roller and the pallet, resulting in a fingertip amputation.",0
"A temporary employee was wrapping shrouds on pallets. The employee loaded it onto a conveyor when his finger was caught between the pinch point on the roller and the pallet, resulting in an amputation of the right ring fingertip.",0
"An employee was moving a 10-foot, 30-pound scaffold leg into a rack for loading. His right middle finger was crushed between the scaffold leg and the rack; he suffered an amputation to the finger.",0
An employee was removing a shackle from the rigging holding a caisson that a digger was lowering onto a forklift. The caisson shifted and pinched the employee's fingers against the forklift. His right ring finger was amputated.,1
"On November 18, 2022, an employee was checking rodent stations at a customer's home. Upon standing from a bent position, the employee experienced pain in the abdomen. He was hospitalized and had surgery for a hernia.",1
"On November 18, 2022, at 2:00 PM, an employee was working in the garden center when she was bitten by a spider. The employee was hospitalized.",1
"An employee was working on an assembly line. The employee stepped backward, missing the platform, and fell down the stairs, breaking their tibia in two places. The employee was hospitalized.",1
An employee was feeding rubber into an extruder when their glove became caught by the auger screw. The employee sustained amputations to the right middle and ring fingertips.,0
"An employee was performing framing tasks on the third level of an apartment complex under construction. While moving toward another work location, he tripped and fell about 30 feet to the concrete floor. The employee was hospitalized with fractures to his clavicle, back, waist, and elbow.",1
An employee was pulling shrink wrap off a conveyor belt when his finger became caught between the roller and a pallet and was amputated.,1
"An employee was bending down to pick up the corner of a tarp when his knee gave out. He fell to the ground and hit his head, resulting in a knee injury and concussion.",1
"An employee was preparing to unload supplies to install a rooftop HVAC. The employee was pulling a crate of materials to the edge of the box truck so that a forklift could pick it up. The crate broke, causing him to fall off the back of the truck and onto the ground below, resulting in a pelvic fracture.",1
"On November 18, 2022, an employee was removing dough from the rotational die on the pie line when their arm was pulled in. The employee sustained a broken arm.",1
"An employee was trimming a 55-gallon open top tank. His hand contacted the saw blade, resulting in amputation of his left index finger and a laceration to the left middle and ring fingers.",0
An employee was operating a stand-on forklift and was approaching the computer on the discharge line when her leg was pinned between the forklift and the discharge line and fractured.,1
An employee was on a crane hoisted platform hanging ties on a bridge form. The employee fell to the ground and sustained a leg fracture.,1
"An employee was cleaning the back cargo area of her mail truck when she placed her leg up to the bumper and slipped, causing her to fall approximately 2 feet onto her back and hit her head on the concrete ground. The employee suffered head trauma and pain in her neck and shoulder.",1
"An employee was delivering items from his truck. After the delivery, he was electrocuted on the metal platform of his truck, which was touching the metal platform of the loading dock.",1
"An employee was transferring milk from a front tank to a back tank. As the employee began opening the valve, his finger became caught in the valve, resulting in a left middle fingertip amputation.",0
"An employee was loading a packaging machine with retail meal trays when her left middle finger was caught between two cassettes, resulting an a partial amputation.",0
"On November 19, 2022, at 2:00 PM, an employee was using a grinder to clean the rollers on the sheet metal machine. His glove became caught in the rollers, causing his hand to be pulled in. The employee's left middle finger was amputated.",0
"An employee was installing grading on a mezzanine level. Upon unhooking fall protection to move down to install grading, an iron beam support collapsed. The employee fell approximately 20 feet to the ground and sustained fractures of the ribs, tailbone, teeth, and a facial injury.",1
"An employee was administering a respiratory treatment to a patient when the patient bit the employee's finger, resulting in the amputation of the right middle fingertip.",1
"An employee was at their workstation when they got tangled in cords that were hanging off the back of the workstation, tripped, and fell to the ground. They sustained fractures to their right humerus and right knee.",1
"An employee was walking across the pad when they were struck by a pickup truck that was backing up. The employee sustained a neck fracture, rib fractures, and a crushed shoulder.",1
"An employee tripped and fell, suffering a broken hip.",1
"An employee was corralling cattle when a cow charged the employee. The employee began climbing the gate and fell, sustaining a fracture to the right foot that required surgery.",1
"On November 19, 2022, an employee was investigating a leaking boiler. He drained the boiler, allowed it to cool off, and then used a wet/dry vacuum to remove the rest of the water. Seeing that the source of the leak was a plug in the boiler, he began to remove the plug. Remaining steam pressure caused the plug to come out; the steam then burned his right arm, chest, and neck and the back of his left hand.",1
"An employee was assisting a customer. Upon stepping away, the employee tripped over a power cord from a box fan and fell to the concrete floor, sustaining a femur fracture.",1
"An employee was picking orders in a distribution warehouse. A box fell from a top rack and struck his head, breaking a neck vertebra and a bone in his shoulder. He was hospitalized.",1
"An employee was removing a part from a loader. The running loader moved forward, amputating the employee's left index fingertip.",1
"An employee was using a ladder to retrieve a product. While descending the ladder, the employee missed the last step and fell onto the concrete floor, sustaining a left tibia fracture.",1
"An employee was working in the office in the freezer department. They walked out of the office and went to move an electric riding pallet jack. Their right leg became caught between the pallet jack and a parked cart, resulting in a fracture and hospitalization.",1
An employee was using a bone saw to cut meat and partially amputated their left index finger.,0
"An employee was conducting a security walkthrough of a warehouse. The power went out. As the employee was walking back through the building toward the security post, a forward moving forklift struck the employee; its load then slid off its forks and fell onto the employee. The employee suffered a broken pelvis and ribs and was hospitalized.",1
"An employee was repairing the axle on a transfer cart while it was suspended in the air by a forklift. The cart slid off the forklift and landed on the employee's right hand, resulting in crush injuries.",1
"An employee was working on a plastic extruder line. The employee stepped on plastic strands on the concrete floor and fell, resulting in an upper leg fracture. The employee was hospitalized.",1
"An employee was clearing a jammed wooden pallet from a robotic stacker/palletizer machine. As the pallet was adjusted, the employee's right forearm was crushed in the frame of the palletizer. The employee was hospitalized.",1
"On November 11, 2022, an employee was replacing a sprocket and bearings on a shaft. The employee used a lathe in the maintenance shop to clean the shaft when their hand came in contact with a portion of the rotating equipment on the lathe. He sustained amputations of two fingers on his left hand and a finger fracture.",1
An employee slipped and fell while in a produce vault and suffered a concussion.,1
An employee was walking down an aisle when she tripped and fell. She was hospitalized for a dislocated knee.,1
An employee was moving a load on a forklift when part of the load slipped off and landed on a nearby employee. The injured employee fell and struck his head on the floor.,1
"An employee was sitting on a 20-inch-high deck on the front of a truck. When the truck moved, the employee fell forward off the deck to the pavement, suffering multiple injuries to the torso.",1
"An employee was cutting a pipe when the grinder he was using bound to the pipe and kicked back. The employee was hospitalized for lacerations of ligaments, nerves, and blood vessels of the wrist.",1
An employee was changing the paper in a slot machine when their right index finger was struck by the door of the machine resulting in an amputation.,1
"An employee was on a concrete form to strip other forms when the form that he was on came loose and fell to the ground below, pinning him underneath. The employee sustained internal injuries to the intestines, pancreas, and liver.",1
An employee was working in a hall when they tripped and fell against a brick wall; they sustained a concussion as well as neck and back contusions.,1
"Employees were lubricating a chain and sprocket on an entry gate to a treatment plant. One employee's ring and middle fingers were pulled into a control panel motor drive sprocket, which amputated both fingertips.",1
An employee was cutting medium-density fiberboard for a residential project using a table saw when his hand contacted the saw blade and was lacerated.,1
An employee was descending the steps to alight from his tractor when he slipped and punctured his lower right leg. The employee was hospitalized.,1
The employee was installing hat channels on the roof of the carport. He had placed one set of the hat channels and climbed on top to start placing the second set of hat channels when the hat channel previously installed broke off. The employee fell onto the concrete. The employee sustained a left wrist fracture and a skull fracture.,1
"An employee was working on a ladder handling freight on shelves. She slipped and fell off the ladder to the ground, resulting in a right ankle injury.",1
"An employee was standing on the side of a debarker when it became jammed. As the employee cleared the jam, the log kicked out and knocked the employee off-balance. His hand was caught between the kicker and frame, resulting in a right little finger amputation.",1
"An employee was preparing to mount a manlift when it caught their abdomen and pinned the employee between the lift and the wall, lifting him up and wedging him between the lift and the ceiling. The employee sustained abdominal abrasions and contusions as well as a fractured thoracic vertebra.",1
"An employee was reading the numbers off the bottom of a steel plate weighing 9,000 pounds as it was being lifted by a crane operator. The steel plate swung out and struck the employee in the chest, resulting in internal trauma that required hospitalization.",1
Employees were performing cleaning duties throughout the plant using hydrochloric acid and caustic water. The employee sustained second and third-degree burns to the right leg.,1
"An employee had just swiped her ID card in a corridor, and was turning to resume walking, when she fell to the floor and broke her femur.",1
"At approximately 8:40 AM on November 21, 2022, an associate was building a 51-inch bladder and removing spacer bolts by raising the lock ring top with a prybar. The prybar slipped out from its position, causing the lock ring top to land on the tip of the associate’s left index finger, resulting in a fingertip amputation.",0
"An employee was moving a large, heavy piece of gym equipment into a building using a pallet jack. The pallet caught on something in the entranceway and the equipment began to shift forward. The employee's right index finger was caught between the equipment and the metal door frame. The finger was partially amputated.",0
"An employee was delivering materials to a worksite along an icy access road. While driving up a steep grade, the dump truck lost traction and began sliding backward. The employee jumped from the truck and the truck tipped over, pinning the employee's leg underneath. The employee sustained a broken leg and back.",1
"An employee was traveling from another job location. As they were walking toward the store through the parking lot, a vehicle pulled into a parking space and struck the employee in the leg.",1
"Salesmen were cleaning the car lot following a snowstorm. One employee was holding onto the back of a plow truck with the driver unaware when he slipped and his head struck the pavement. The employee lost consciousness for approximately 20 to 30 seconds and reported head, neck, and left shoulder pain.",1
"On November 21, 2022, an employee was operating a rolling mill with their foot placed on the track of the reel assembly. The employee's right foot was caught between the moving wheel guard and the fixed guard door frame, resulting in two open toe fractures.",1
"On November 21, 2022, an employee was operating a drill press when the drill bit caught his glove. He suffered an amputation to the right ring fingertip.",0
An employee was operating a powered industrial truck. The vehicle struck a nearby bollard and the employee's left foot was caught between the PIT and the  bollard. The employee was hospitalized and had surgery for a left ankle fracture.,1
"An employee was prepping rice using a pot cooker. Upon picking up the pot cooker, boiling water spilled onto the employee, resulting in second-degree burns to the chest and abdomen.",1
"An employee was heating up an oil line when a pipe compression fitting in the line came apart, causing hot oil to burn the employee.",1
"An employee was on a scissor lift to install truss bracing for a salt shed. The employee moved off the scissor lift to stand on the roof trusses and fell approximately 22 feet to the concrete surface below. The employee sustained fractures to the legs, hip, and ribs as well as a head injury.",1
An employee was applying an anti-mold substance to the exterior of a 20-foot building when they slid off the end of the rigging rope and fell to a lower roof. The employee sustained a broken back.,1
"An employee was using an automated press machine to remove the center label from a 12-inch vinyl record. As the employee pointed to something on the running press machine, the tip of his finger was amputated; it was later surgically reattached.",0
An employee was reviewing site plans at the tailgate of a truck when a reversing forklift struck the employee. They were hospitalized for soft tissue damage.,1
An employee was re-installing a bucket at an electrical panel. Their screwdriver came in contact with the metal panel and an arc flash occurred. The employee sustained third-degree burns to the face and arms.,1
"On November 22, 2022, an employee was helping the operator of a pop-up chop saw by removing cut stock. The employee made contact with the sawblade, suffering an amputation to the left middle finger.",0
An employee was observing the gauges on a sand hauler when the sand hauler backed up and struck the employee. The employee was hospitalized with internal bleeding.,1
"An employee was setting up a splitter table. Upon reaching to help the table rotate, the employee's gloved hand got caught between a switch and a metal plate, resulting in an amputation of the left index fingertip.",0
"On November 22, 2022, a temporary employee was operating an end-rider pallet jack when it struck a nearby forklift. The employee's right ankle became caught between the end-rider and the forks of the other forklift, resulting in an ankle laceration and fracture. The employee was hospitalized and had surgery.",1
An employee was digging a footing and compacting the ground when a vertical shore fell and struck the employee on their hard hat. The employee sustained a contusion.,1
An employee was walking to his vehicle after work when he slipped on ice in the parking lot and fell. The employee sustained neck vertebrae fractures and rib fractures.,1
"An employee was measuring the level of diesel fuel in a tank, from a catwalk approximately ten feet above ground level when he fell to the ground. The employee was hospitalized for a hip fracture and a laceration above the eye.",1
An employee was conducting quality assurance on the manufactured bricks on a conveyor belt when their right hand and arm were caught between the conveyor belt and sheave. They sustained a laceration to their right hand and arm.,1
"An employee was pulling out a dock plate lift when it malfunctioned, falling on him and partially amputating his middle finger.",0
An employee was filling cylinders with propane for forklifts when the nozzle detached from the cylinder. Propane began to spray and the employee attempted to shut off the nozzle. The employee was sprayed with propane and sustained burns.,1
"An employee was transferring a steel bar to a saw roller bed. The load shifted, causing the roller bed and bar to tip over 3 feet onto the ground. This caused the roller bar to bounce and land on the employee's right foot, resulting in amputation of the big toe and foot fractures.",0
"An employee was on a staircase ladder pulling product from a shelf. As she was descending the ladder with merchandise, the employee missed a step and fell to the concrete floor below. The employee sustained a right tibia fracture and meniscus tear.",1
"An employee was setting a steel beam in a cofferdam when it dropped onto his leg, resulting in a fracture.",1
"An employee was supervising a concrete pouring crew. He turned to check on another crew and fell, sustaining tibia and fibula fractures that required surgery.",1
"An employee was using an overhead hoist to lift a core. Their thumb became caught between the core hook and the hoist hook during a lift, resulting in an amputation of the thumb at the first knuckle.",0
"On November 22, 2022, an employee was delivering lumber to a job site. The employee climbed into the bed of the pickup truck and began unstrapping the lumber from the rack. After releasing the rear strap, he felt the truck begin to move. The employee then jumped from the back of the bed of the truck onto the back passenger side of the vehicle. He fell and hit the ground and the truck then rolled over his legs with the front passenger side tire. The employee was hospitalized for a tibia fracture and displacement.",1
"On November 22, 2022, at approximately 8:00 AM, an employee was performing maintenance activities on an aerosol production line valve when their finger was caught in the moving machinery. The employee sustained a finger amputation.",0
"On November 22, 2022, an employee was fixing a pressure washer on a truck with the garage bay door closed. Carbon monoxide fumes began to accumulate and the employee became light-headed. They fell over, resulting in a laceration to the forehead and were hospitalized.",1
"An employee was moving a manual pallet jack. When pushing the jack, it fell from the mezzanine and struck the floor. The employee sustained a hip injury.",1
"An employee was helping to set up display tables on the sales floor of a store. The employee tripped over a display table leg and fell onto her back. As she was falling back, she twisted and fractured her ankle.",1
An employee was using a cart machine with a remote to move shopping carts when the machine would not stop. The employee was pinned between the carts and a store display and sustained a broken right leg.,1
"An employee was removing a manifold and de-valving a tube trailer. Upon removing the second tube valve, the valve ejected due to internal pressure in the tube and the employee was struck by either the valve or the pressure being released, causing him to fall to the ground. The employee sustained lacerations to the shin and above the eye as well as a shoulder contusion.",1
Two employees were standing beside a parked forklift when another forklift approached. It struck the parked forklift and the injured employee's hand became caught between the two forklifts. The employee sustained finger fractures and lacerations and was hospitalized.,1
"An employee was standing on a ledge of a precast T-girder using a trowel with mortar to fill recesses in the beam. The employee fell approximately three feet, six inches from the ledge to the ground, striking a concrete block and possibly the adjacent girder that was located behind him. He sustained fractures of the right fifth through ninth ribs, a contusion to the forearm, abrasion and contusion to the face, and a laceration to the tongue and was hospitalized.",1
An employee was on a column securing clamps and shackles that connect the column to the tower crane. He noticed the chain had kinks and went to fix them when slack was removed from the chain and the employee's right little finger was pinched between two chain links. The employee sustained a partial amputation.,1
An employee was exposed to carbon monoxide at employer-provided housing on the preserve due to a gas leak. The employee demonstrated symptoms consistent with carbon monoxide poisoning.,1
"An employee was placing roof sheeting when they fell over 30-feet to the ground, sustaining leg and pelvic fractures.",1
"An employee stepped out of a truck and it began rolling, pinning them between the truck and a waste container. The employee sustained a right femur fracture.",1
"An employee was painting the back section of the house. While on top of a porch roof to paint the windows, he slipped on the wet roof surface and fell to the ground below. He was hospitalized for a pelvic injury.",1
"An employee was on a ship transfer span overseeing the loading of equipment from the barge to a truck. As a crane was moving the power pack for a pile driver, the employee slipped and was caught between the power pack and another piece of equipment. The employee sustained a broken pelvis.",1
An employee was reaching for an item on a shelf. The employee fell to the floor and was hospitalized.,1
"An employee was on a ladder hanging decorations. When descending the ladder, her shoe got caught and she fell to the ground, resulting in a left hip fracture.",1
"On November 23, 2022, an employee was aligning a cylinder to the stick with his hand placed in the cylinder hole. The employee sustained a fingertip amputation.",0
An employee was utilizing a cut off saw to cut rebar when the sparks struck his pants. His pants caught on fire and the employee sustained third-degree burns to the lower right leg.,1
An employee was trying to unclog material in a pug mill. The machine's paddles degloved his right hand and caused a shoulder injury.,1
An employee was operating alligator shears to cut pipe material when three fingers on their left hand were amputated.,0
"An employee was opening a dairy cooler door when his thumb was pinched in the door, resulting in a fingertip amputation.",0
"An employee was opening the side door on a dryer. The employee slipped on a metal tray, fell, and suffered a broken right ankle. She was hospitalized, requiring surgery.",1
An employee was found on the ground and was hospitalized for a head injury.,1
"On November 23, 2022, an employee was using a meat cutting machine. The machine became jammed and upon clearing the jam, the employee sustained an amputation to the left index finger.",1
"An employee was using a meat saw to cut ribs when his hand struck the blade, resulting in a laceration to two fingers on his left hand.",1
An employee was cutting wooden boards using a table saw and sustained an amputation to the left thumb.,1
"An employee was operating a powered pallet jack with sheet metal loaded on its forks. As he held the metal in place while moving to a new location, the lift came to a stop. The metal shifted and amputated the tip of his middle finger.",1
An employee was aligning rebar on a shear machine to make a cut. The machine engaged and crushed the employee's left hand in its rebar holder. The employee's index and middle fingers were amputated at the second knuckle.,1
"An employee was running wires in an attic above the second floor of a house. The employee fell through sheet rock between two joists, landed on a staircase below, and suffered a broken right femur and right thumb.",1
"An employee was preparing to pour electrolyte liquid into a generator when a static shock occurred as he opened the tank. While pouring the liquid, a second static shock occurred, causing the employee to get splashed with liquid and sustain an eye and face injury.",1
"An employee was operating a chassis bender when they noticed oil and began to clean the machine. The employee's right hand was pinned by the mandrel of the bender and the machine, resulting in a contusion and laceration that required stitches.",1
An employee was performing welding tasks underneath of a roller machine table to fabricate brackets for push rollers. The machine began operating while the employee was underneath; he was hospitalized for five rib fractures.,1
"The employee was assisting with moving ground rods on a forklift when the bundle of rods shifted on the forklift and fell, breaking three fingers on the employee's right hand and amputating the middle fingertip.",1
"On November 23, 2022, at approximately 11:30 p.m., an employee was ladling aluminum from a crucible when molten metal spilled onto their right foot. The employee was hospitalized with third-degree burns.",1
An employee was cutting a weld on the tine of a piece of equipment. The employee suffered a broken arm.,1
"A yard spotter was training a teammate. The trainer stood on the platform of the yard truck and as the teammate was backing into a trailer, he jumped the fifth wheel and the trainer was pinned between the cab of the yard truck and the trailer. The employee sustained broken bones.",1
"An employee was walking to a break room when his right foot was caught under a parked rider pallet jack, causing him to fall. He suffered a broken left hip and was hospitalized.",1
"An employee was preparing dinner in a kitchen. A tomato got caught in a vegetable slicer; as the employee was removing it, the slicer cut the employee's hand. The employee's index, middle, and ring fingertips were amputated.",0
"An employee was near a luggage cart assisting with aircraft loading. Three luggage transporter carts were lined up and the crew had trouble removing the locks from the transporter. The driver of transporter began to move forward to adjust the locking system and the injured employee quickly moved from the driver side to the passenger side of the transport between the second and third cart. The employee was knocked to the ground and the cart ran over his leg, resulting in a left tibia/fibula fracture.",1
"An employee slipped on ice while walking to a parking lot, fell to the ground, and suffered broken ribs.",1
"On November 25, 2022, a customer's vehicle was stolen in the parking lot. The driver of the stolen vehicle struck an employee with the vehicle, and she was hospitalized with broken ribs and a punctured lung.",1
"An employee was standing on the rider platform of a pallet jack. When the pallet jack was put in reverse, the throttle handle went up and caused the jack to stop abruptly. The employee fell to the floor, sustaining six broken ribs. She was hospitalized.",1
An employee was slicing deli meat using an electric slicer when they sustained a partial amputation to the tip of their thumb.,0
"On November 25, 2022, at approximately 8:30 a.m., an employee was getting into a truck when he slipped and fell, resulting in a compound fracture to the left ankle.",1
"On November 25, 2022, an employee was observing a metal column as it was transported on a forklift. The attachments of the forklift came loose, and struck the employee on the head, shoulder, and hip before falling onto the employee's left foot. Their left foot was amputated past the toes.",1
"An employee was moving artificial Christmas trees. He was found unconscious on the ground with a head injury, and was hospitalized.",1
"An employee was using a six-foot step ladder to hang decorations above the check-in counter. They fell from the top rung to the floor, sustaining a broken clavicle and ribs.",1
"An employee was assisting a new employee with laminator machine startup. The extruder is on a carriage that can be moved along tracks in the floor. As the extruder was being moved into the machine, the injured employee stepped into the area to assist the new employee and then turned to move out of the area. As he turned, his foot was pinned between the extruder carriage and the floor stop, resulting in non-displaced fractures of the second and third metatarsals of the left foot. He was hospitalized.",1
An employee was taking trash to an exit door. The door had been propped open with a feather duster when the wind blew it shut on her fingers. Her right middle fingertip was amputated.,1
"A cook was moving a hot pot of soup from the stove to the fridge when their glove slipped off. The pot fell on the employee, resulting in burns to his arm, chest, and face.",1
"An employee was driving a salvaged vehicle to retrieve a part from another salvaged vehicle. The vehicle lost control, drove into a ditch, and hit a tree. The employee sustained a concussion, jawline fracture, and teeth avulsions.",1
"An employee clocked out after a shift, and while walking through the parking lot to their vehicle, they fell while stepping off a curb. The employee sustained a fractured left ankle and a sprained right ankle.",1
An employee was standing on the floor zip-tying an eight-foot section of trellis to a grow rack. The extra trellis was laying on the floor in front of the rack. The employee tripped over it and fell to the floor. She sustained a left hip fracture.,1
"An employee was moving a body in a morgue. The gurney used to transport the body pinched the employee's fingertip, resulting in an amputation.",0
"An employee fell from a step ladder, resulting in a little fingertip amputation that required hospitalization.",1
"An employee was helping a customer with a boat that needed a battery replacement. The employee climbed into the boat to look at the battery and upon finishing, jumped 4 feet off the boat onto the parking lot. His leg twisted and he sustained a right tibia fracture.",1
An employee's left little finger was caught in a trash receptacle's hinged door. The fingertip was amputated.,1
"An employee was operating an electric forklift when it struck a pile of cardboard. The employee jumped off the forklift, which ran over the employee's left ankle. The employee sustained an injury to the ankle that required surgery, as well as a potential right wrist fracture.",1
"An employee was walking toward the swinging doors to access the sales floor. A nearby electric power jack was approaching at the same time. The forks of the pallet jack came into contact with the swinging door, causing it to strike the injured employee. She fell to the ground and sustained a hip fracture.",1
"An employee lost their balance and fell backward on the stairs, resulting in a head injury.",1
"An employee was kneeling on the padded work platform of a casting machine, reaching to pull slack out of a film web being re-threaded through the machine. He lost his balance and slipped, and his right hand, wrist, and forearm were burned in the 90 °C hot water bath.",1
An employee was sorting items when they fell three feet to the floor. They sustained a hip fracture and were hospitalized.,1
"An employee was working in a man basket at a wellhead when a fire caused flames to engulf the wellhead. When the fire reached the man basket, the employee jumped. His chest struck valves on the ground about 15 feet below. He was hospitalized, having suffered four broken ribs and a hematoma.",1
An employee was using a tire press to put a tire on a rim when they sustained a right ring finger amputation from the tip to the first joint.,0
"An employee was changing the bearings on a measuring head wheel for a wireline unit. The new bearings were placed and as the wheel was lowered back into the housing, the wheel pinched the tip of the employee's finger, resulting in a left middle fingertip amputation.",0
"An employee was backing up a powered industrial truck (PIT) in the shipping department when their foot was crushed between a concrete pillar and the PIT, resulting in multiple toe amputations.",1
An employee was trying to clear a jam on a feed cutter machine and partially amputated their fingertip.,1
An employee was operating an aerator machine when she got pinned in the fan that was located behind her. She sustained abdominal injuries and a strained back.,1
"While at a jobsite, an employee's e-cigarette exploded in his pocket, setting his pants on fire. He suffered burns to the left upper thigh and hand.",1
The employee was on a ladder installing IT equipment. The employee fell off the ladder and sustained a skull fracture.,1
"An employee was washing pots with a pressure washer. The employee fell and was struck by the water from the washer, which lacerated the employee's right forearm.",1
"On November 28, 2022, an employee was descending the ramp of the truck when he slipped and fell three-to-four feet to the ground. The employee was hospitalized for a lower right leg fracture.",1
"An employee was using a ladder to paint a patient's room. While descending the ladder, he missed the second-to-last step and fell to the floor, breaking his left hip.",1
"An employee was filling up a mop bucket in the janitor's closet when the bucket fell over. The employee slipped on the water and fell causing injury to her left hip and leg. Later, while resting in a chair, the employee may have suffered a stroke. The employee was hospitalized.",1
"Three employees were observing a laser-cutting automation machine in a caged area. The safety restart was pressed and the machine began moving on auto-mode. The injured employee was pinned between a conveyor and the automation machine, sustaining injuries to the spleen and stomach and internal bleeding.",1
"An employee was pinned between a forklift that was operated by another employee and a pole, suffering a bruised and dislocated hip.",1
"An employee was placing a truck on jack stands when a jack slipped and pinned the employee's hand, resulting in a crush injury to the left ring finger.",1
"An employee was stringing steel through a machine die. After attaching the puller to the wire, the employee used his thumb to apply pressure to the wire before jogging the machine. His finger was pinched between the turning block and the puller, resulting in a left index finger amputation at the first knuckle.",0
"An employee was installing rim joists and I-joists on an interior office within a building that was under construction. The employee fell from a ladder and landed on the concrete floor, sustaining a dislocation of the navicular bone of the foot that required surgery.",1
"An employee tripped and fell on a laboratory floor, suffering a broken right femur. She was hospitalized.",1
"An employee was using a pellet mill and conditioner. After the machine had been turned off, it continued to spin and the employee's right middle finger came in contact with the paddles. They sustained an amputation above the first knuckle.",0
"An employee was walking when he slipped on some bolts and fell, resulting in a torn meniscus.",1
An employee was lifting a mobile generator out of a mobile testing van when they sustained an L5 vertebra fracture.,1
"An employee was returning to work when they noticed that the tabs of two steel pipes had become interlocked with one another. As a co-worker was helping to remove a tab from one of the pipes using a plasma cutter, the pipes moved and the injured employee's left hand became caught between the pipes. The employee sustained an amputation to the left index finger.",0
An employee was removing a crucible from the melting chamber when his ankles were burned by steam. He was hospitalized.,1
"An employee was standing on a flatbed truck strapping down farm product. A load of small animal feeders shifted and fell over onto the employee. He was knocked off the truck and was struck on the head with the feeders, resulting in a head injury.",1
"At 9:25 a.m. on November 28, 2022, an employee was helping a co-worker operate a band saw. As he was assisting to remove the unused stock from the support table, another piece of steel bar stock weighing approximately 1,430 to 1,560 pounds came out of the saw's clamp and rolled, causing the table to tip due to the weight. The bar then fell off the table and struck the employee, resulting in crush injuries to the lower leg and foot. The lower leg was surgically amputated.",1
"On November 28, 2022, an employee fell off a chair and sustained a left ankle fracture.",1
An employee was placing overnight donation items into a donation bin to move inside for processing. The employee reached for the railing and stepped back when she lost her balance and fell down the steps. The employee landed on the concrete stairs/asphalt landing and sustained a head contusion.,1
An employee was operating a band saw to cut a tenderloin and partially amputated his right index finger.,0
An employee was putting a belt back on a moving conveyor when their fingertip was amputated.,0
An employee was using a battery-powered saw to cut a piece of wood when it amputated his left ring fingertip.,0
"An employee was installing framing on a residential structure. The employee fell, landing on concrete and sustained a brain bleed.",1
"On November 28, 2022, an employee was hospitalized after an altercation with another employee, that resulted in four broken ribs and a punctured lung.",1
"An employee was taking part in an endoscopy procedure when she tripped on a power cord on the floor, resulting in a left hip fracture.",1
An employee was welding on metal framing. A forklift struck the framing and knocked it over onto the employee. He sustained a concussion and back contusions that required hospitalization.,1
"On November 28, 2022, an employee was lifting a motor with a chain when the eyelet broke. The motor fell and the employee was struck in the head, suffering a blood clot in the brain. The employee was hospitalized.",1
An employee stepped down from a piece of fracking equipment into mud. He twisted his ankle and fractured it.,1
An employee was placing material into a chucker when a clamp pinched his right index finger. He sustained a distal amputation.,0
"An employee was offloading bundles of steel from a truck when the banding on the bundles near the bottom of the stack broke open. The stack shifted toward the employee and the bundle at the top of the stack fell, crushing their right leg.",1
"An employee was walking to her office when she fell to the floor, resulting in a dislocated shoulder.",1
"An employee had removed a screw plug on an airlock housing on a piece of equipment, and was trying to clear out clogged product, when the equipment struck his left index finger. He suffered a partial fingertip amputation.",0
"An employee was using a jump saw to cut wood when their left hand made contact with the saw blade, resulting in the amputation of his left hand.",0
"An employee slipped on ice and fell while walking to a vehicle. The employee was hospitalized with six fractured ribs, and bruising to his lung and liver.",1
"An employee was walking through the parking lot when he slipped on ice, fell, and struck his head on the concrete. He suffered a concussion and a head contusion.",1
"An employee was operating an electric pallet jack to pull groceries for an order. Upon dismounting the jack and walking it forward, the jack continued to move and struck him above his left ankle. The employee sustained an ankle fracture that required surgery.",1
An employee was assaulted by a family member of a resident at the facility.,1
An employee was operating a forklift on a rail track platform when their left arm was caught between the forklift and the side of a rail car. They sustained a left arm fracture.,1
"A temporary employee was walking to an inspection area when they tripped over a pallet stop and fell to the floor, resulting in a hip fracture in three places.",1
"An employee was walking through the production line when they tripped over a material cart and fell, resulting in a fractured elbow and foot pain.",1
An employee was performing cashier services when they tripped and fell behind the cash register. They sustained a pelvic injury that required surgery.,1
"An employee was removing plastic from a cotton module when they were struck by the flipper bar and knocked down. The flipper bar continued to come down and crushed the employee's lower leg, resulting in an amputation.",1
"An employee was hooking a converter dolly to a trailer. When the employee lifted the front of the dolly up, the dolly rolled forward and pinched his left thumb against the trailer's pintle hook. The employee's left thumb was partially amputated.",0
"Two employees were lowering a body down on the frame of the truck when the jack bled down. His left index fingertip was crushed, resulting in amputation.",0
"An employee was walking into work when they slipped on ice, fell and sustained a broken hip.",1
"An employee was on a ladder about 15 feet high untying curtains from a window. The ladder slipped and he fell to the floor, sustaining bilateral arm fractures that required hospitalization and surgery.",1
An employee was exiting the cab of a truck when he fell to the ground and sustained a hip fracture. He was hospitalized and had surgery.,1
"An employee working on a mobile scaffold fell approximately 51 inches to the floor, resulting in a head injury, rib fractures, and collapsed lung.",1
An employee was completing maintenance on a light fixture in a dorm when he was electrocuted by 277 volts.,1
"An employee was waiting as a 6-foot ram cylinder, lifted on the forks of a forklift and suspended with a steel chain, was positioned. The ram fell from the forklift and struck the employee's back and neck.",1
"An employee was working from a ladder to install a duct hanger. The duct hanger fell and knocked the employee off the ladder. The employee fell to the floor, suffering a head injury and multiple fractures.",1
An employee was helping a patient in their home. She fell to the floor and suffered a broken and dislocated right shoulder. She was hospitalized.,1
"An employee was draining liquids from the fluid pot through a ball valve. The employee opened the valve and noticed some debris blocking the port and the employee begin to open and close the valve to clear the debris. Once the debris broke loose, it struck the employee in his left leg causing him to lose his balance and fall to the ground in the direct path of the 920 lbs. of gas pressure and debris. The employee sustained contact burns to his arms as well as contusions to his chest and legs.",1
An employee was bending parts on a brake press machine. The machine amputated the employee's left middle fingertip.,1
"An employee had clocked out for her lunch break and was taking the shuttle back to her car. While getting off of the shuttle, the employee slipped on the stairs and fell, landing on their buttocks. She was hospitalized for a left gluteal hematoma.",1
"On November 30, 2022, an employee was grabbing the extension for a floor hoist when their thumb was caught between the top of the floor hoist and the bottom of the truck body. They sustained a distal left thumb amputation.",1
An employee's hand was caught on an intermediate feed belt while she was trying to unjam a piece of wood. Her left middle and index fingers were amputated.,0
"Employees were stacking equipment onto storage racks when a rack shifted and an employee's right hand was caught between racks. The employee sustained fractures to the hand, and their right index finger was partially amputated.",0
"An employee was moving a trash can when he slipped on ice. Both his knees struck the ground and he suffered ligament damage to both knees. He was hospitalized, requiring surgery.",1
"An employee was walking on concrete slab of the third floor construction when he slipped on the ice and fell, resulting in a right ankle fracture that required surgery.",1
"An employee was removing a part stand from a lathe. The part stand tipped and pinched the tip of the employee's little finger between the stand and the lathe frame, resulting in a partial amputation.",1
"An employee was moving a gaylord into a tipper and adjusting the bar in the tipper that holds the gaylord in place. The employee's right index finger was caught between the hole in the tipper and the tipper bar, resulting in a right index finger amputation.",0
"An employee was picking up a car from a fenced-in area when they became locked inside. The employee climbed the 7-foot fence, jumped off onto the concrete surface, and sustained bilateral ankle fractures.",1
"On November 30, 2022, employees were installing a steel pipe with an auger. As the employees were retracting the auger bore, one employee slipped and his left foot became caught in the auger. He sustained a left foot amputation.",1
"An employee was administering a vaccine to a dog when they were bitten in the neck, resulting in injuries to the thyroid and esophagus.",1
"An employee fell on ice and struck her right arm and shoulder on the ground, resulting in fractures that required surgery.",1
"An employee was removing a shackle pin to release towing cable when their left thumb was pinched in the cable and shackle, resulting in a fingertip amputation.",1
"Three employees were removing equipment from an old fermentation room at a bakery. They were using two bakery dollies to remove metal plates from the floor of the room. One of them was holding one of the metal dollies with his right hand on the side of the dolly, as a plate was being centered on the two dollies. The plate slipped and struck his right thumb, which was amputated near the last joint.",0
"An employee was standing in a grocery cart, stocking an upper shelf. The employee fell to the floor and suffered a broken femur.",1
"An employee was walking past the bottom of a staircase when his toe caught on the bottom riser and he fell, sustaining a fractured hip.",1
A employee was leaving her locker and began walking backward when her foot was caught on the transition from the laminate flooring to the concrete. She sustained an ankle fracture.,1
An employee was cleaning the wall behind the fryer when his foot slipped off the ladder and contacted the hot grease in the fryer. They sustained third-degree burns on the left foot and were hospitalized.,1
"An employee was reaching under the base of a plastic extrusion machine to adjust the leveling foot. The leveling foot broke and the extruder platform fell on the employee's right forearm, resulting in a laceration that required hospitalization and surgery.",1
"An employee was rolling a stack of beams forward on rollers when his glove got caught between a roller and the stack of beams, resulting in a right little finger amputation.",0
"While coming down from a truck bed, an employee suffered a broken right ankle.",1
"An employee was operating a crane to move ballast material onto a locomotive platform. After reaching the top of the platform, the employee was facing the load and focusing on the lift when they fell from the locomotive platform, approximately 71 inches.",1
"An employee was on a ladder routing security wire. The employee was pulling the wire with his right hand and holding the door with his left hand. The door began to close and amputated his index, middle, and ring fingertips.",1
An employee was driving a forklift. The forklift approached its destination and was slowing down when it hit a moisture spot on the floor and slid into the wall. The employee's ankle was caught between the forklift and the wall and was fractured; the employee was hospitalized.,1
"An employee was operating a forklift when his foot became stuck between the forklift and the dock plate, resulting in a bruised ankle.",1
"An employee had been riding a horse through a herd of cattle to identify and remove any injured cows when they were found on the ground. The employee sustained eight rib fractures, a punctured lung, and possible concussion.",1
"An employee was working on a die at the tryout press. He leaned down to look at a broken dowel when the die fell off and onto his left little finger, resulting in a crush injury and hospitalization.",1
"Two employees were sliding tandem axles on a trailer. Three of the four locking pins released, but the fourth would not. One of the employees used a hammer to get the last pin to release. When the pin released, the trailer lowered and the injured employee's head was caught between its tire and frame. He sustained contusions to the face and head.",1
"On November 30, 2022, an employee was loading a bin containing paper for shredding during a rainstorm. His hand contacted the truck lifter's chain just as the mechanism that moved the bin was activated. The chain amputated a fingertip on his left hand, without bone loss.",0
"An employee was cleaning a manure belt when his finger was pinched between the pulley and scraper cable, resulting in an amputation of the right index fingertip.",0
"Employees were connecting a cross-frame when they noticed that it was installed backward. Upon disconnecting it, the injured employee noticed that there was a knot in the sling and moved to the side of the cross-frame. The cross-frame began to lean over and the bottom of the frame flipped the injured employee up, causing them to fall approximately 20 feet to the ground. They sustained a right hip fracture and contusions.",1
"An employee was repairing a belt that drives a machine when their glove was caught between the belt and sprocket, resulting in a left index fingertip amputation.",0
An employee was clearing material from a dust collecting machine when their left hand was struck by the slide gate. They sustained a partial amputation of the left middle and index fingers.,0
"A forklift operator was in the freezer operating a stand-up reach truck when a case fell as he was bringing a pallet down. The employee exited the reach truck to move out of the way of the falling case. The vehicle continued to roll and struck his lower left leg, resulting in an injury.",1
"An employee was troubleshooting a mechanical issue on the main paving machine when his finger became caught between the chain and sprocket, resulting in a fingertip amputation.",0
"An employee was loading a die insert into a CNC machine. The die insert hit the side of the CNC machine and the magnetic hoist released the die insert, partially amputating the employee's right little finger.",0
"An employee fell through a porch while delivering packages. The employee suffered an open fracture and was hospitalized, requiring surgery.",1
"An employee was unjamming a conveyor belt when their left index fingertip was pulled under the belt, resulting in amputation.",0
"An employee was helping a truck driver unhitch a trailer from their truck. The truck drove forward while the employee's left hand was still between the trailer and the jack. When the truck moved forward, the jack came down and crushed the employee's index finger, resulting in a fingertip amputation.",0
"An employee was entering a room when their hand was caught in the door, resulting in a partial amputation to the right middle fingertip.",0
An employee was adjusting forklift forks when the forks fell and broke their leg.,1
"An employee was performing maintenance on a forklift regulator when the forklift caught fire. The employee suffered burns to their face and the front of both arms, with the right arm requiring surgery.",1
"An employee was walking between the tines of a stationary forklift when a nearby forklift struck the stationary vehicle, causing the tines to strike the employee. The employee was hospitalized for a leg injury.",1
"An employee was driving a forklift when banding straps got caught under one of the tires, became stretched, and finally came loose, hitting the employee just above the right eye. The employee suffered a facial laceration, concussion, and facial fracture.",1
"An employee was working on a telephone pole from an A-frame ladder when he fell to the ground and landed on his feet, suffering injuries to his feet and tailbone that required hospitalization.",1
"An employee was entering a facility when they tripped over a rug and fell, resulting in a broken left hip.",1
"An employee was attempting a manual cut back on an extrusion line. His sleeve became caught between the film and the plastic core. The employee sustained a broken left forearm, a dislocated left ankle, and damage to the left eye socket.",1
"An employee was drilling into a rail with a drill press. The employee was clearing some aluminum shavings when the drill bit contacted his left thumb and index finger, resulting in a laceration to the thumb that required surgery, as well as a laceration to the index finger.",1
"An employee parked their car and slipped and fell on ice in the parking lot. The employee suffered a fractured left wrist, a fractured left hip, and a strained left shoulder that required hospitalization.",1
"On December 1, 2022 two employees were making bends on stainless steel sheet metal. The injured employee's little finger became pinched between the 150-pound sheet metal and the brake press frame as they were adjusting the sheet. The employee sustained a partial fingertip amputation.",0
"An employee was pushing a steel floor post onto a saw horse when his left hand was pinched between the post and the saw horse, resulting in an amputation to his left little finger.",0
"On December 1, 2022, an employee was in the process of taking down a damaged overhead garage door frame, when the door frame fell on their arm, resulting in a fracture requiring hospitalization.",1
"An employee was moving a parts carrier with an overhead crane. The employee was repositioning the hook for the overhead crane, which weighs approximately 50 pounds. The hook shifted and pinched the employee's left middle fingertip, resulting in an amputation.",0
An employee was walking around the sawmill when a board fell from the level above and struck them. The employee sustained a spleen injury requiring surgery.,1
"On December 1, 2022, an employee was working on a ceiling when they fell from a 6-foot ladder to the floor and fractured their right arm. The employee was hospitalized.",1
"An employee was cutting a shrink boot off a connector when their knife slipped and struck their left index finger, resulting in a laceration to the base of the finger.",1
"On December 1, 2022, an employee was polishing a pin on a slant turn lathe when their left sleeve got caught on the lathe, pulling them into the lathe and resulting in an arm amputation.",0
"An employee was clearing a buildup of iron from a casting machine using a hand tool. The trough shifter moved and caught the employee's left little finger in a pinch point, resulting in a partial amputation.",0
An employee was using emery cloth to polish a piece of metal shaft stock. The emery cloth and his right index finger got caught in the shaft and the finger was amputated.,1
"An employee was moving a hopper when her little finger was caught between two hoppers, resulting in a fingertip amputation.",1
"An employee was performing routine calibrations on gauges for a purified water loop. The employee was on ladder removing a pressure valve. When the valve came loose steam was released from the water loop and struck the left side of the employee's torso, causing them to fall from the ladder. The employee suffered second degree burns on their left shoulder and torso, as well as a fracture of their left foot from the fall off the ladder.",1
"An employee was performing maintenance on a machine when the machine cycled while his right hand was in it. The employee's hand was caught between the machine and the shear blade inside of it, resulting in a cut to the bone on his palm.",1
An employee was removing a shoring support jack that had been used for support while pouring concrete at a jobsite. The employee was removing the pin from the jack when it pinched and partially amputated their finger.,0
An employee was trying to find a leak in the hose for an air-pressured saw. The saw activated and amputated the employee's left index finger above the knuckle.,0
An employee was removing a fan cover from a piece of equipment. The employee sustained an abrasion to their finger which was then infected by a soiled rag. The employee developed a skin infection that required hospitalization.,1
"An employee was using a cordless drill to screw sheet metal overhead when his glove got caught on the drill bit, resulting in a partial amputation to his left index finger at the first knuckle.",0
"An employee was replacing deck boards on a balcony. He completed his work and was coming off the balcony on an extension ladder. He felt the ladder slipping and pushed off the ladder. He fell on top of a fence panel, striking his abdomen and was hospitalized for three fractured ribs.",1
"Two employees were securing a 20-foot long piece of wood/metal to an excavator. As it was being lifted by the excavator, the piece fell approximately eight feet and struck the injured employee, resulting in fractures to the legs, ribs, pelvis, and spine as well as two punctured lungs.",1
"Two employees were performing maintenance activities on a bulldozer. They were using a track hammer and sledge hammer to drive the master pin in when a metal fragment from the sledge hammer broke off and struck the employee in the neck, resulting in hospitalization.",1
An employee was working from a ladder to clean water nozzles on a wastewater screening system when he lost his footing and slipped downward toward a discharge auger. The employee sustained tissue and bone damage to the right middle fingertip.,1
"An employee was dismantling a display booth at a trade show. The employee lifted it up at both ends and walked with it to a shipping crate. While setting the booth down, the unit rolled on top of the employee's right middle finger and partially amputated it.",0
"An employee was removing a spinal cord from a carcass on a production line. The employee slipped while reaching to cut out the cord, fell from a stand, and landed on the concrete floor, suffering a broken knee.",1
An employee was walking toward the company office when he tripped and fell on the ground. He struck his head on the ground resulting in an internal head injury and loss of consciousness.,1
An employee was exiting a dump truck to enter an office when the dump truck rolled and pinned the employee against a wooden post. The employee sustained fractured ribs and a punctured spleen.,1
"An employee was lowering a lift gate on a conveyor when his finger was caught in the pinch point, resulting in amputation of the right middle fingertip.",0
"An employee was exiting a work van when they tripped and fell. The van rolled over the employee's right leg, resulting in crush injuries.",1
"On December 2, 2022, an employee was changing the propane tank on a forklift. As he connected the hose to the forklift, he was sprayed with propane between his thumb and index finger. He suffered freezing burns to the thumb, index finger, and hand and was hospitalized.",1
An employee was taking a chemical sample from a tanker truck. The 12-foot high catwalk retracted while the employee was taking a sample and they fell backward off the truck. The employee struck several objects on the way down and sustained a hip and vertebrae fractures as well as a punctured kidney.,1
An employee's hand was pulled into a pulley while lowering a platform over a piece of equipment. The employee's right middle finger was amputated at the first knuckle.,0
"An employee was walking in the laundry area when they slipped and fell, resulting in a right hip fracture.",1
"On December 2, 2022, an employee was loading boxes in a cage at the receiving stage area. While coming down from the cage, the employee slipped and fell backward to the concrete floor, landing on her arm. The employee was hospitalized with a fractured arm.",1
A delivery driver was walking in the facility when they slipped and fell down the stairs striking their ribs.,1
"On December 2, 2022, an employee was walking through a parking lot when the wind blew over a nearby trash can. The trash can struck her and knocked her onto the ground. She was hospitalized for a right ankle fracture that required surgery.",1
An employee went to move a cut piece of steel forward and the band saw blade caught his nylon glove and pulled his finger into the saw blade. A fingertip on his left hand was amputated.,1
"A precast form was suspended 3-5 inches above the ground when it released and landed on an employee's left foot, resulting in a toe amputation.",1
"An employee was prepping cardboard trays for use by nearby equipment when they were struck by a box clamp truck. The clamp attachment struck the employee's left leg, knocking her to the ground. Then the clamp truck ran over her right foot. The employee sustained fractures and lacerations to the foot and toes.",1
"An employee was prepping for the inspection of a pickup bed when asphalt became unstuck and slid down, striking the employee. They sustained a left foot, ankle, and right leg fracture.",1
"An employee was operating a mid-rider pallet jack when he was struck by another forklift, resulting in an abdomen contusion.",1
"An employee was operating a milling machine when their finger got caught in the machine, resulting in an amputation of the thumb tip.",0
An employee had been driving a golf cart to check on a building where smoke was reported. The employee fell as she exited the golf cart and was found unconscious; she was hospitalized.,1
An employee was operating a stand-up pallet jack when two toes on their right foot were crushed and possibly amputated between the pallet jack and a concrete bollard.,0
"An employee was in a forklift basket to help put trash bins into a dumpster. While the basket was being elevated, it fell off the forklift tines. The employee landed on a paved surface and sustained a broken pelvis.",1
"On December 2, 2022, an employee was removing sand from the drum of the sand separator when he noticed a pry bar going into the drum. Upon grabbing the prybar, his left ring finger was pinched between the pry bar and a part of the equipment. He was hospitalized and the left ring fingertip was surgically amputated.",0
"The injured employee was pushing an air container with another employee in the ball mat area. The air container hit the stop plate, causing the container to shift and crush the injured employee's left ring finger against a metal support beam. The finger was amputated.",0
"An employee was preparing to clean a cheese packaging machine. When clearing a clump of powder from the machine, her fingers were caught in the screw auger. The employee sustained a thumb amputation and a partial amputation to the index finger.",0
"An employee was entering work through an entrance area whose walkway was being pressure-washed. She slipped and fell on wet concrete, dislocating her left knee and spraining her left ankle.",1
"An employee was clearing a jam in the discharge opening of a machine when the mold came down, crushing and fracturing four fingers on the employee's right hand.",1
"An employee was preparing to work on a second-story roof. When transitioning from the ladder to the roof, the employee fell to the ground, resulting in a possible right arm fracture.",1
"An employee was being trained to use a baler machine. The baler machine malfunctioned and the middle plate became stuck in an upward position. As the employee lowered the plate, it fell onto his right hand, amputating the index fingertip.",0
An employee was taking care of a resident when the resident pushed the employee into a wall. The employee sustained a severe head injury.,1
"On December 3, 2022, an employee was disassembling and removing a conveyor system from a warehouse when the framework shifted and pinched his hand, resulting in an index finger amputation.",0
An employee was climbing a ladder to secure it to a building. The ladder and the employee fell to the ground. The employee was hospitalized with a broken leg.,1
An employee was descending from an A-frame ladder and fell from the second or third rung of the ladder to the cement floor below. The employee was hospitalized with an injury to their upper leg.,1
An employee had been speaking with a supervisor on the south dock. The employee turned around to walk away and struck against a manual pallet jack. The employee sustained injury to the left ankle requiring surgery.,1
"An employee was ascending a ladder to access a metal roof. When stepping onto the roof, the employee lost footing and fell to the ground, striking his head on a satellite dish during the fall. He sustained fractures to the lumbar vertebrae and head lacerations.",1
An employee was operating a stand-up forklift when it struck a cement pole. Their left foot was caught between the forklift and the pole resulting in an avulsion to the foot.,1
An employee was walking through a corridor to the dock area when they saw a spider and fell to the concrete floor. The employee sustained a broken hip.,1
"An employee was exiting their car at a fuel pump island when their knee struck the car door, resulting in a blood clot.",1
An employee was working in a residential area when they fell off a four-foot step ladder and sustained a left ankle fracture.,1
"An employee was operating a pallet jack to assist a co-worker when they lost control and the accelerator was activated. The employee dismounted the vehicle, resulting in an ankle fracture that required surgery.",1
An employee was milling animal feed using a tractor-powered feed mill. He turned to look at the feed auger because it had stopped feeding and lost his balance. He put out his right hand to steady himself and his hand contacted the rotating flywheel on the feed mill; his thumb was partially amputated.,1
"An employee ascended a ladder to retrieve a comforter from a shelf. While descending the ladder, the employee missed a step and fell to the floor, resulting in a possible hip fracture.",1
A longshoreman fell down the ship's hold access ladder and sustained an L1 vertebra fracture.,1
"An employee was tagging a load when they tripped over the corner of an outfeed conveyor and fell to the floor, resulting in a femur fracture.",1
"An employee was standing on a temporary platform made of wooden planks to brush the cheese wheels in the cheese aging room. The employee fell 5 feet and struck their head on the concrete curb, resulting in a concussion.",1
An employee was walking up to a patient's home to begin working when the neighbor's dog lunged off the porch and attacked her. Her wrist was fractured when the dog grabbed her arm.,1
Employees were working to install a hydraulic cylinder into a press. A forklift was being used to lift the cylinder. The injured employee was guiding the cylinder to a pallet when the straps flipped and the cylinder dropped onto the pallet and the employee's right foot. The employee sustained a foot injury.,1
"A maintenance technician was adjusting a tension spring on a robot welding carousel. The technician asked the operator to cycle the rotating table so that he could observe and troubleshoot. As it rotated, the employee was struck by the leg of the robotic welder and sustained contusions and abrasions to the right thigh.",1
"An employee was using a yard horse to dump a trailer's load into a raw material bin. The crank on the trailer came loose and struck the employee in the head, causing a fractured skull.",1
"An employee was performing maintenance on a 36-foot light pole. The employee was moving the pole when it rolled onto their foot, crushing and amputating a toe.",1
"An employee was loading tools into a bucket truck. Upon stepping off the rear of the truck, he lost his footing and slipped. As he was falling, his right hand slid down the grab rail and got caught. The employee's right little finger was amputated.",1
"On December 5, 2022, at approximately 5:24 PM, an employee was changing a wheel on a reach truck when the jack slipped, causing the outrigger to fall and crush his left middle and ring fingers against the concrete floor. He sustained amputations to both fingertips.",0
"An employee was walking across wet pavement to assess whether snow needed to be removed. As the employee stepped over a guardrail, he slipped on black ice and his right leg went forward while his left leg went backward, resulting in broken bones in his left leg.",1
An employee was walking in the parking lot outside the store when they were struck by a customer's vehicle. The employee sustained a broken pelvis and a dislocated hip.,1
A driver had loaded a vehicle onto his trailer and was strapping it down when he lost his footing and began to fall off the truck. He then jumped from the truck to the ground and sustained two broken ankles.,1
An employee was transferring cattle to an alley when a cow knocked the employee down and stepped on their leg. The employee sustained a femur fracture.,1
An employee was grinding carbon steel parts. Sparks from the grinding went behind the employee's welding jacket and caught their shirt on fire. The employee sustained second-and third-degree burns to the right side of their chest and stomach and required hospitalization.,1
An employee had just dropped off a trailer at a warehouse and was preparing it to be loaded. The employee fell from the back of the trailer to the ground. The employee sustained a skull fracture and brain bleeding.,1
"An employee went to her car to get a gas container to help a customer. She was walking back to the sidewalk and became dizzy. She grabbed a nearby trash can and then fell forward onto the sidewalk. The employee was hospitalized with a headache, dizziness, a cut and swelling to her lip, and a lump on her forehead.",1
"An employee was ascending a tree to trim the top off with a chainsaw. At a height of 20 feet, he clipped into the equipment holding line. He then fell from the tree and landed on a chainsaw on the ground. The employee sustained a broken femur.",1
A temporary employee was cleaning up her work station at the end of her shift. She manually rotated the turntable platform of the spring-actuated pallet carousel skid positioner to bring a pair of pliers within reach. Her left middle fingertip became pinched between the tubular steel frame and the turntable platform resulting in amputation of the fingertip without bone loss.,0
"An employee was working in a client's home to rewire the house. While walking down the stairs to the basement, a step broke away from the support, causing the employee to slide down the steps and fall onto the floor. He struck his head on the wall/floor at the bottom of the stairs, resulting in a concussion and right knee injury.",1
"An employee was unloading a semi-truck trailer. Upon lifting a 30-pound box, the employee experienced a sharp pain in the side and back and was hospitalized for a back injury.",1
"An employee was reversing a forklift with a load of product weighing 2,500 lbs. The forklift struck the screen door over the dock and the employee's left foot was caught between the forklift and the screen door. The employee's foot was fractured, requiring hospitalization and surgery.",1
"An employee was tracing an electrical conduit through a partition wall in preparation to demolish the conduit. The employee passed through an access opening in the partition wall and entered an area concealed behind the wall. Upon setting his feet down on what appeared to be a concrete floor, the surface gave way and the employee fell approximately 15 feet to the floor below sustaining a fractured tailbone. The surface that gave way was later determined to be sheet metal that had been covered over by dust, and was not a structural floor.",1
An employee was lifting a balloon pump out of a medical transport van when they sustained ruptured blood vessels in the arm. The employee was hospitalized and had surgery.,1
An employee was assembling a machine. The employee was using a crane to lift a roller into position when the lifting strap broke. The roller caught the employee's left hand in a pinch point resulting in the amputation of approximately 3/4 of the thumb.,0
"An employee was on a ladder, reaching for fruit in a tree, when the ladder went sideways, causing the employee to fall. His right forearm was lacerated by a tree branch.",1
"An employee was walking to the back of the building to take a wooden podium apart. While walking down a set of stairs before the exit, his feet slipped out from under him and he fell onto the stairs. The employee sustained a broken rib and a left forearm fracture.",1
"Two employees were working on a forklift. They removed the hydraulic line, causing the mast of the forklift to fall onto the injured employee. He was hospitalized for crushing injuries to the chest and ribs as well as lung hemorrhaging that required surgery.",1
"An employee was operating a pallet jack when they were caught between a rack rail and the pallet jack, resulting in crush injuries to the chest.",1
"An employee was adjusting a steel plate on top of an I-beam so that they could be welded together for an order. The metal plate fell onto the employee's left middle finger, resulting in amputation. Their ring finger was also injured.",1
"A forklift was setting trusses (16' long, 8.5' tall) onto the ground. An employee was stabilizing a truss when the load of trusses fell on top of him resulting in a back injury.",1
"An employee was inching web into a tower folder for newspaper printing when his left middle and ring fingers were caught, resulting in crush injuries.",1
"An employee was gathering tools at the back door of a work van, when a skid steer backed into them, resulting in a fractured left leg.",1
An employee was replacing a motor for a water pump that is part of a milk processing system. The employee was contacted by hot water and sustained first-and second-degree burns to his right forearm and right thigh.,1
"An employee was operating a variable reach forklift to transport an 8"" x 8"" x 14' timber at a jobsite. The right-side tires entered the grass shoulder at the edge of the road, and the forklift tipped over a three-foot rock dike. The employee sustained a fractured T11 vertebra, and possible fractures to four ribs.",1
An employee was supervising children as part of an afterschool basketball program. The employee jumped up to get a basketball that was stuck on the back of the backboard and their wedding ring became caught on the backboard. The employee's fingertip was amputated.,0
A truck driver was picking up a trailer. He was lifting the landing gear of his truck to prepare to hitch the trailer when the truck rolled backward and pinned him against the trailer. The employee sustained multiple fractured ribs.,1
"On December 6, 2022, an employee was working on a drill press to package parts when their glove was caught in the machine. The employee sustained a laceration to the left index fingertip.",1
"A soy product became thick and stopped circulating. An employee went to remove a hose from the intake of the return pump to check for a blockage. When they opened the cam lock, the hose popped off and sprayed sludge that was approximately 150 °F. The employee sustained first and second degree burns to both arms above and below the elbows.",1
"An employee was walking on a sidewalk when they slipped on ice and fell, resulting in a head contusion.",1
An employee was using a band saw to cut ham steaks when the blade amputated their right ring fingertip.,0
"An employee was walking across a scale platform when he tripped on dried mud, causing him to fall onto the guardrail and sustain rib fractures.",1
"An employee was accessing an attic area from a ladder and fell, resulting in fractures of the orbital socket and the left and right wrist.",1
"An employee was hanging a sign while standing on the first step of a trailer. The employee lost their footing and fell to the ground, resulting in a hip injury.",1
"An employee was operating a CNC machine. Upon placing a part onto a fixture in the machine, the hydraulic clamps caught the employee's thumb, resulting in amputation of the thumb tip.",0
"An employee was assisting a co-worker with maintenance on an electric roll-up door. The injured employee grabbed the tension release handle and pulled it down. Their right little finger rotated underneath the handle, resulting in a fingertip amputation.",0
"An employee was using a snorkel system to suction hot oil out of a railcar tanker. Pressure had built up in the hose and pushed extra air pressure into the oil. This caused the hot oil and gases up to 180 degrees to be blown in the employee's face, arms, and chest. He sustained second and third-degree burns to the face and arms.",1
"An employee was in the parking lot, checking a VIN number on a damaged vehicle that was being towed into the shop. As she stepped away from the vehicle she got caught on the wire ring from a hubcap on the damaged vehicle, and fell backward, fracturing her left hip and spraining her left wrist.",1
"A employee was clearing a wood plug in a dryer when their left glove was caught by the machine. The employee used their right hand to try and free their left and the right hand also became caught in the machine. The employee sustained the amputation of their left arm up to the elbow, and bruising to the right arm.",1
"An employee was performing maintenance on a sewer lift station. An electric winch was being used to lift the pump motor out of the lift station. The winch cable became kinked. As the employee was working to untangle the cable, his right little finger was pinched by the cable and pulley section of the winch resulting in a partial amputation.",1
Two employees engaged in a fist fight. One of the employees became unconscious and possibly had a seizure and a heart attack.,1
"An employee was cutting logs with a chainsaw when a log broke loose and rolled onto him, trapping his legs. The employee sustained crushing/nerve injuries to the legs.",1
"An employee was walking down the stairs from the third floor to the second floor when the whole stair structure broke off, and fell to basement. The employee fell 15 feet to the floor below and sustained an ankle, tibia, and spine injuries.",1
"There was an electrical outage caused by a tree limb that fell on a 13.2 kV distribution line. The injured employee and two co-workers were working to put the middle phase back up and restore power. While raising the downed wire, the injured employee contacted the tail of the wire with his face and an arc flash occurred. The employee was hospitalized with burns to the left side of their face, left arm, and shoulder.",1
"An employee was operating a hydraulic brake press when his right middle finger was pinched between the die and the part that was being formed, resulting in partial amputation of the finger.",0
"Employees were moving an empty railcar to a different track. The injured employee was dismounting a shuttle wagon when he fell, sustaining a rib fracture and a punctured lung.",1
"An employee was operating a meat saver machine. Upon placing his left hand under the auger to catch the meat, the employee's left ring fingertip was caught by the auger, resulting in amputation.",0
An employee was unloading wood piling from a light-duty trailer. The piling rolled off the side of the trailer and pinned the employee against the ground. The employee sustained a fractured tibia that required surgery.,1
"An employee was standing on the wooden frame of a sprinkler system while removing parts from the system when the frame gave way, causing them to fall 7-10 feet to the ground and sustain a fractured knee.",1
"Two temporary employees were using a scissor lift 20 feet above the ground when a boom lift collided with the scissor lift causing the scissor lift to tip over. One employee sustained a bruised leg and injuries to the head, left arm, and stomach. The second employee was treated for a facial laceration and released.",1
An employee was repairing an overhead door when they fell from a mobile stair platform to the floor and sustained a fractured left leg.,1
An employee was preparing to change the pieces of steel used for the crusher rotor. The employee was under a bolt holding a 700-pound bar fell and crushed his left index finger against the rotor. He sustained a partial amputation of the fingertip.,0
An employee was on a step ladder installing window flashing on the first floor. He slipped and fell off the ladder about two feet and twisted his knee/lower leg upon landing on the muddy and uneven ground below. The employee sustained a broken tibia and was hospitalized.,1
"An employee was walking behind the cash registers when they tripped and fell, resulting in a back and shoulder fracture.",1
"An employee was using a sledgehammer to adjust a metal I-beam. When the employee struck the I-beam with the sledgehammer, his left little finger was pinched between the edge of the I-beam and the sledgehammer, causing an amputation of his fingertip.",0
"An employee was adding an extension to the concrete chute of a concrete truck to prepare to pour concrete. When the employee removed his hand from supporting the weight of the extension, his right hand was caught in a pinch point on the chute. His index and middle fingertips were amputated.",0
"An employee stepped through a green corrugated fiberglass panel that allows light through and fell 20 feet to the concrete lower level, resulting in a fractured pelvis and hip.",1
"The injured employee was directing a forklift driver to lower a steel unit onto steel blocks. The injured employee was adjusting the blocks when the unit came down on his left hand, amputating the index finger at the nailbed.",0
"An employee was replacing the housing on a water system mounted above a sink while standing on a portable step stool-dolly and countertop. The employee lost his balance when he stepped off the counter onto the step stool and fell approximately 2.5 feet to the floor, resulting in a left tibia fracture.",1
"An employee was cutting a tree limb with a pull saw. The limb hit the employee's arm, which began to swell. The employee was hospitalized and required surgery.",1
An employee was bitten by a cat and the bite became infected. The employee was hospitalized.,1
"An employee was helping to replace a LED light when their hand went through the glass lid of the old LED, resulting in lacerations to their right wrist.",1
An employee was repairing downed conductors when the cable that was being worked on came in contact with another energized cable from a power line. The employee experienced an electric shock.,1
An employee was cleaning a portable restroom. An acid cleaner was added to a spray bottle that had a bleach solution in it. A chemical reaction produced chlorine gas. The employee began coughing and was hospitalized for the inhalation of fumes.,1
"An employee was standing on a precast bed instructing a team member to strike a buttress to straighten the stressed strand in the form. The buttress spun due to the impact from the hammer and pressure from the strand. The pressure from the strand then pulled the buttress through the opening. The strand struck the employee's foot, knocking him off his feet and landing on his shoulder. The employee sustained an ankle injury and a dislocated left shoulder.",1
"An employee was operating a stand-up forklift to pick up waste. The forklift was about to strike a bollard and the employee jumped off the vehicle. Her foot was then caught under the forklift’s front tires, resulting in a fractured left heel.",1
"While leaving work for the day, an employee fell in a paved lot and sustained a fractured right humerus.",1
An employee tripped over a pallet in a trailer and struck his head inside the trailer.,1
"On December 7, 2022, an employee was on an extension ladder, using a nail gun to nail framework when he lost balance and fell about 5 feet to the ground, landing on his backside. The employee was hospitalized with a strained lower back.",1
"An employee was helping a crew rig up a tree. The employee was holding a wrench with his right hand to keep the bottom nut on the tree from turning when another crew member began to torque up the top bolt. As the bolt turned, the employee's fingertip was crushed between the wrench and the tree. The employee sustained an amputation to the middle fingertip.",0
"An employee was adjusting a set of retractable (manual) conveyor rollers. The employee's hands were under the rollers when the rollers were pushed toward him. His fingers were caught in a pinch point, resulting in the amputation of his left index finger at the first knuckle.",1
An employee was walking down steps in the office following a meeting when she tripped and fell several steps. The employee landed on the floor and against a wall and sustained injuries to the left collarbone and left hip.,1
An employee was closing a truck door after a delivery when his finger was wrapped around a rope hanging from the door. The employee sustained a fingertip amputation.,0
An employee was clearing a blockage of trimmings on a flatbed die cutter when their right thumb came in contact with moving parts. The thumb tip was amputated.,0
"An employee was re-filling the abrasive blast pot with grit. As the abrasive pot was depressurizing, the lid was opened and the employee sustained fractures to the neck, eye socket, and head.",0
"An employee was removing one of two roll plates from a motor stator. The roll plates were hot due to a baking process to cure their varnish coating. The employee attached an overhead bridge crane to the plate for support while the plate was unbolted from the motor stator. The crane was attached to the wrong roll plate, causing the unsupported plate that the employee was working on to fall onto his leg after the bolts were removed. The employee suffered a fracture to his lower right leg and a second-degree burn.",1
"On December 7, 2022, an employee was taking out trash when they stepped between the dock and the dumpster and fell, breaking five ribs. The employee was hospitalized.",1
"An employee was checking the connection under a battery inside a crate when the tool he was using slipped, causing the battery to crush his left little finger.",1
"An employee was operating a pneumatic chop saw when his hand was struck by the blade, resulting in the amputation of all four left hand fingers at the lowest knuckle.",1
"Employees were in a parking lot waiting to board a crew boat. An employee showed his co-workers a pistol and as he was putting it back in his truck, the gun fired. The employee sustained gunshot wounds to the right ring and little fingers.",1
"An employee was pushing a cart loaded with drywall when one of the cart's wheels became caught on a higher elevation in the uneven floor causing the cart to tip over. The drywall landed on the employee's leg, fracturing the tibia and fibula.",1
"An employee was working with makeup tongs (manual pipe tongs) to make them clasp. The top drive torque spun counter clockwise, causing the tongs to clasp and the snub line to pull tight. The entire pipe stand flexed and the pin end lost contact with the floor, skidding backward toward the injured employee. The tongs and stand of drill pipe struck the employee on their left side resulting in fractures to the left tibia, fibula, and ulna.",1
While walking from the parking garage to the office building an employee slipped and fell to the floor. They were hospitalized and underwent surgery for a dislocated right knee.,1
"An employee was feeding the salmon that are taken care of onsite. While untying the boat, their right ring finger became caught between the line and the boat cleat and amputated.",0
"An employee was running drywall mud on the ceiling. He took a step back and his foot went off the mobile utility scaffold and he fell three feet to the ground, sustaining injuries to the right wrist and right leg.",1
"An employee was moving a cabinet when the cabinet tipped over onto the employee, resulting in a leg injury.",1
"An employee was putting on a bucket cover when they fell off a truck to the ground below, resulting in a fractured jaw and back.",1
An employee was climbing a ladder to begin work on a roof. A co-worker that was already on the roof slipped off the roof and swung into the employee on the ladder knocking them to the ground. The employee that fell from the ladder sustained a leg fracture.,1
An employee was waiting in line to clock out at the end of the shift when he was bumped by another employee and startled. This caused the employee to take a step to the left where his foot caught the edge of the pallet and he fell to the floor. The employee sustained a hip fracture.,1
"An employee was packing trays into baskets. Upon straightening a package of product that was stuck in the steam tunnel, the employee's finger was caught in the conveyor sprocket. They sustained a partial amputation to the right ring finger.",0
"An employee was under the hood of a customer's truck repairing the battery when a nearby vehicle pulled into the lane where the employee was servicing the truck. The vehicle struck the employee and pinned him, causing lower body contusions.",1
"An employee was cleaning a machine when his arm got caught in the machine, resulting in a broken arm.",1
"An employee was inside a ditch while pull-starting a gas-powered water pump with their left hand. As the employee pulled the handle, their hand was punctured by a stick protruding from the bank of the ditch, resulting in a wound that subsequently became infected and required hospitalization.",1
"An employee was buffing and repairing a horizontal tire when a nearby PIT struck a vertical leaning tire. The vertical tire fell onto the injured employee, pinning him between the two tires. He sustained rib fractures and pain in both knees and right shoulder.",1
An employee was pulling a speed rack when the rack fell onto the employee. They were hospitalized with contusions to the left elbow and left hip.,1
"An employee was unhooking the hoist chains from a bundle of goods. The chain began rising and became hooked on the bundle again, causing the bundle to fall over and strike the employee's left leg, resulting in a fracture.",1
"An employee was walking back inside the store after her lunch break when she was struck by a vehicle, resulting in two fractured legs.",1
"An employee was inserting wooden cabinet parts into a steel box clamp. When the employee pressed the start button, his right ring and little fingers were caught between the wooden part and the clamp. The employee suffered a distal amputation of the ring finger and an avulsion to his little finger.",0
"On December 8, 2022, while hanging hog stomachs and inverting them before packaging, an employee developed pain in the right thumb. The employee was hospitalized, having suffered inadequate blood flow due to heat inside their glove.",1
An employee was getting equipment out of a work trailer when wind caused the door to slam shut on their right thumb. The thumb was fractured and lacerated.,1
"An employee was working in an aerial lift with a material handler jib and winch line on it. He was in the bucket at the top of the pole, installing a pulling dolly, placing the conductor in the dolly, and preparing it to be tied off under tension. The employee needed a second line grip, so he used the winch jib line to retrieve the tool from the top of the pole. The line jammed in the reel of the jib winch and the employee pulled the line free. This caused his hand to become caught and get pulled into the winch. He sustained several fractures to the middle, ring, and little fingers of the left hand as well as avulsions to the middle and ring fingers.",1
"On December 8, 2022, at 8:30 p.m., an employee and a co-worker were switching out trucks when the fifth wheel of the truck did not unhook from its trailer. The employee reached in to switch the lever to unhook the fifth wheel. The truck moved forward and drove over the employee's right foot, resulting in a foot injury that required hospitalization.",1
An employee was injured by a tire exploding. The employee sustained a contusion to right forearm and abdominal area as well as lacerations.,1
"An employee was gathering straps for maneuvering pipe in the field while a trackhoe was being relocated. The track of the vehicle caught an 8x16 wooden mat, which struck the employee on his right leg, resulting in a fracture and hospitalization.",1
"A police officer was taking part in live ground defense and recovery training with another officer. Her training partner was on top of her, tightening his hold on her, when she suffered an appendix injury that caused her appendix to rupture.",1
An employee was preparing the captive bolt handheld stunner to stun an animal when it dropped onto his leg and fired. The employee sustained a fracture to the left tibia and fibula.,1
"An employee was walking through a parking lot when they slipped on ice and fell, fracturing their left femur in four places. The employee was hospitalized.",1
"An employee was operating a low-level order picker in an aisle of a distribution center. The employee was passing a co-worker in the aisle when his order picker struck a storage rack. The employee's left ring fingertip was caught between the equipment tray on the order picker and the storage rack, resulting in an amputation.",0
An employee was assisting with re-clamping after a point broke off a bar. The employee's finger got caught between two parts of the bench machine resulting in a finger amputation.,0
"On December 8, 2022, an employee was exposed to a cologne fragrance and experienced an allergic reaction. The employee was hospitalized.",1
An employee was cleaning cotton from a clogged battery condenser when his right hand was degloved.,1
"An employee was pulling a juice pallet outside of the cooler using a pallet jack when his foot became stuck inside the pallet, resulting in a toe laceration that required surgery.",1
"Three employees were working in an active work zone when a third-party vehicle entered the work zone and struck a portable light tower. The employees were then struck by the light tower, sustaining injuries. One employee was hospitalized for three rib fractures and a spleen laceration.",1
An employee was standing on a step stool to complete a dog food audit when he fell backward and landed on the floor. The employee sustained a thoracic vertebra fracture.,1
"An employee was operating a motorized pallet jack for order selections. As the pallet jack was in reverse, the employee became pinned between the vehicle and another parked pallet jack, resulting in an injury to the left leg.",1
"An employee was using a torch cutter to cut 30-foot long, 12-inch diameter pipes into half-moon sizes. The pipe that the employee was cutting rolled and pinned his left leg between two pipes, resulting in burns (possibly third-degree) to his leg.",1
An employee was driving a stand-up forklift in reverse. The forklift struck a pole in an aisle; the employee suffered a back injury.,1
"An employee working in the threading department was using a tool to move a pipe into position in a machine. The machine jogged, causing the pipe to move toward the employee and pin their hand between the pipe and a pipe stop. The employee sustained a laceration to their right wrist.",1
An employee was getting tools out of their vehicle when they slipped on the curb and struck their knee against the pavement. The employee sustained a left knee fracture.,1
"An employee was operating an electric, sit-down forklift to transport solid wood doors. The doors began to split and the employee raised their hand through the forklift. The doors struck the employee in the left hand, resulting in a finger amputation.",0
An employee stepped outside because she was feeling hot. She proceeded to become disoriented and fell onto the cement loading dock. The employee sustained a head contusion.,1
"An employee was on a ladder moving totes on a conveyor when he slipped and fell, striking his face on the platform. The employee sustained a concussion and was hospitalized.",1
"On December 9, 2022, an employee was moving a change machine when it fell on them. The employee was hospitalized for a femur fracture.",1
"An aerial performer fell approximately 40 feet to the floor while performing, resulting in a fractured T11 vertebra.",1
"An employee was standing near another driver that was operating a forklift with a crate on it. The wooden crate fell off the forklift and onto the injured employee's right foot, resulting in multiple foot fractures.",1
"On December 9, 2022, an employee was under the conveyor when she became entangled in the drive shaft. She sustained injuries to her scalp and her right thumb was amputated. The employee was hospitalized.",1
An employee was removing casing from the well bore when a lift nubbing came out of the box end of the pipe. This caused the joint of the casing to fall through the elevator and strike the employee. They sustained a fractured clavicle and scapula.,1
"An employee was cutting down a tree. He began going up an embankment to get out of the way and slipped and fell. The tree then fell and struck the employee in the left thigh, resulting in a hip fracture.",1
"On December 9, 2022, an employee was walking back into the building when they slipped and fell against a machine motor. The employee sustained multiple fractures to the left arm and was hospitalized.",1
"An employee was helping perform maintenance on a new high pressure grease pump prior to delivering it to a customer. The high pressure grease cracked the fitting and lacerated the employee's hand at 5,600 psi. Grease was injected into the wound. The employee was not wearing PPE at the time.",1
"On December 9, 2022, an employee was clearing a jam of product on a labeler conveyor when he contacted the nip point on the conveyor rollers and sustained an amputation to the right middle and index fingers. The employee was hospitalized and had surgery. The machine was guarded at the time.",1
"An employee was on an extension ladder installing gutters on a residential house when they fell, resulting in fractures to the right tibia, fibula, and ankle.",1
"An employee was walking to the register when they tripped over a box and fell, resulting in a hip fracture.",1
"An employee was standing on a 48-foot trailer deck. He went to reach for a tool and stumbled, falling off the deck and onto the ground. He sustained fractures to the back.",1
"A commercial diver was preparing to get into the water to take measurements. Upon jumping in, the employee was bitten by an eight-to-twelve-foot bull shark, resulting in severed muscles and arteries to his left calf. The employee was hospitalized.",1
An employee was walking to get to her work station when she tripped over the arms of a parked forklift and struck her head on the ground. She sustained a forehead contusion.,1
"An employee was walking through a hallway with two restrained residents when they were tripped by one of the residents, causing them to fall to the floor. The employee was hospitalized with a knee injury.",1
An employee had been making trips up and down a 14-foot ladder and to and from a cargo container to deliver items to a mason working on the roof. The employee was found on the ground near the ladder. The employee was hospitalized with contusions to the face and eye.,1
"An employee was performing maintenance on a blow mold machine when their finger was caught in a roller. The employee sustained an amputation to their left ring fingertip and a laceration to their left middle finger, which required stitches.",1
"An employee was going through a die disconnection and removal during a shutdown process. His left hand was caught between two dies, and he suffered fingertip amputations to his left ring and middle fingers.",1
"On December 10, 2022, an employee was struck from behind by a lavatory service vehicle while waiting for an airplane to arrive at the gate. The employee sustained facial fractures.",1
An employee was operating a powered industrial vehicle to move a pallet when their leg became caught between a bollard and the vehicle. The employee sustained a leg fracture.,1
"An employee was ascending a ladder when they fell from the ladder onto a scaffold platform, resulting in a head laceration and a cheek fracture.",1
"On December 10, 2022, an employee was loading merchandise into the back of a customer's truck when they fell off the truck and landed on their knee. The employee was hospitalized for a knee fracture and underwent surgery.",1
"An employee was assembling carts for loading and unloading packages. While pushing a cart, she lost her footing and fell. The cart fell on her left wrist and she sustained a fracture that required surgery.",1
"An employee was operating a company-owned vehicle on a roadway inside a worksite. As the employee was driving downhill, the vehicle brakes failed and the vehicle struck an embankment at the bottom of the hill. The employee sustained a vertebra fracture in his back and was hospitalized.",1
An employee was picking orders in the freezer section when he suffered frostbite to his right index and left middle fingers.,1
"An employee was completing a merchandise delivery on the trench hold when a cage door closed, resulting in amputation of his left thumb.",0
"An employee was working from a bosun's chair in a confined space when the chair failed. The employee was lowered to the bottom of the space, where he stood in hot coke while trying to repair the chair. When the employee could not repair the chair, he requested rescue and was pulled from the space. The employee was hospitalized for burns to their feet, hands, back, and buttocks.",1
"An employee was in the equipment room changing a powered industrial truck battery. While changing the battery, the employee became pinned between the walking jack equipment and battery, resulting in a left ankle fracture.",1
"An employee was replacing an underground cable. While taking the bad cable off the transformer, the wrench made contact with rings on the transformer and an arc flash occurred. The employee sustained first and second-degree burns and was hospitalized.",1
"An employee was walking around a counter to make a purchase when they fell over a chair that was near the register and landed on the floor, resulting in a right pelvic bone fracture.",1
"An employee was unloading boxes from a service vehicle to place onto carts. When he finished, he began collapsing a cart. The employee put his right foot on the cart to steady it but it began rolling. The employee then slipped and fell, striking his head on a cart; he sustained a scalp laceration.",1
"Employees were in an excavation installing a 36-inch pipe inside of a 7-foot diameter circular structure. The pipe was suspended by a weight bearing cable attached to a trackhoe. As the pipe was guided in, it was not setting properly and was removed. The pipe became dislodged from the structure and swung backward, striking the injured employee in the chest. The employee was hospitalized for a chest laceration and tingling in the arm.",1
An employee was walking to exit the warehouse building when they were struck by a forklift. They were hospitalized for an ankle fracture and two toe lacerations and contusions.,1
"An employee was working on circuit cards on a ladder. While descending the ladder, the employee missed the bottom step and fell onto the floor, sustaining a left wrist and knee fracture.",1
"An employee climbed onto the third tier of a warehouse rack to free a bulk bag and fell 12 feet to the ground below. He was hospitalized with a broken heel, multiple rib fractures, and compression fractures in his back.",1
A temporary employee was installing electrical wire from a ladder when they missed a rung and fell 1-2 feet to the floor. The employee's elbow and knee were injured.,1
An employee was walking back to her car after completing a delivery when she slipped and fell on a metal surface near the customer's door. She sustained an ankle fracture.,1
"An employee was walking on a newly repaired floor when they fell through the floor, sustaining fibula and tibia fractures.",1
"An employee was reaching down to clean off a chain on the fourth-stage molding line when the chain caught his right middle finger, resulting in a fingertip amputation. The machine was unguarded at the time.",0
"On December 12, 2022, an employee was tying over a gas line using an impact gun when the gun caused sparks that resulted in a flash fire. The employee suffered burns to their face and hands.",1
"On December 12, 2022, an employee walked out of the freezer and was struck by a forklift resulting in a fractured right tibia and fibula.",1
An employee was using a table saw and amputated their thumb.,0
"An employee was repairing the running board of a vehicle when the vehicle's door was opened, catching the employee's finger in the pinch weld of the door. The employee's right ring fingertip was fractured and skin and the fingernail were amputated.",1
An employee reached for a table that was falling and caught their hand between the table and floor. They sustained a hand injury that required hospitalization and surgery.,1
An employee was walking up to the front door of a home. The employee tripped on a 1-to-2-inch elevation change on the concrete pathway and suffered a dislocated left leg and a broken left hip.,1
"An employee was trying to clear dough off the scrap conveyor belt. She reached under the machine when her right glove was caught by a roller. The employee's right arm was pulled over the roller, resulting in a fracture to her forearm.",1
"An employee bumped an A-frame that was holding quartz slabs. He was repositioning a dislodged slab when it fell on him resulting in a broken leg, and injuries to the shoulder, back, and a knee.",1
"An employee was using a jointer machine to straighten a piece of wood. While trying to push the wood down, his hand slipped and contacted the rotating blade. The employee's left index, middle, and ring fingers were amputated at the first knuckle.",1
An employee was climbing a ladder to get from a pontoon to the dry dock when he lost his balance and fell approximately eight feet to the ground. The employee sustained a right ankle fracture.,1
"An employee was at the light board communicating the truck ticket number to another employee. He turned and stepped when his right foot was caught on  the light board post or a nearby steel sheet, causing him to trip and fall onto the concrete floor. The employee sustained a right hip and femur fracture and was hospitalized.",1
"An employee and a co-worker were working near the pallet machine when an unmanned powered industrial vehicle struck one of the employees, resulting in a pelvic injury. The employee was hospitalized and had surgery.",1
An employee was walking when they tripped over a clear plastic bin and fell on her right leg.,1
An employee was troubleshooting a cold form machine. The tail grabber on the cylinder released and came down on the employee's right middle fingertip and amputated it.,0
"On December 12, 2022, an employee was picking a pallet out of a pallet rack with a stand-up forklift. She then backed the forklift away from the rack and the forklift struck another pallet rack behind the employee. Her left index finger was caught between the forklift and the rack resulting in amputation between the first and second knuckles.",0
An employee was working in the branch office when she smelled an odor coming from the furnace. She began to feel ill and was hospitalized for carbon monoxide poisoning.,1
An employee fell from a ladder while repairing an overhead door. He suffered a broken elbow and a twisted ankle.,1
An employee was stripping a precast concrete form. The crane was pulling on the form when the suction released and the form swung into the employee's leg. They sustained a left tibia fracture.,1
An employee was manufacturing furniture and using a power saw when they sustained a partial finger amputation. The saw guard was broken at the time of the incident.,1
"An employee fell from a ladder and contacted the brick pavers near the pool deck, resulting in a broken right leg and two broken ankles.",1
"On 12/12/2022, at about 11:25 AM, an employee had been cutting decking on the second floor of a building. While walking backward, he stepped off the end of the deck and fell approximately 14.5 feet to the concrete floor. The employee was hospitalized with back, rib, and pelvic injuries. The employee was wearing a harness at the time.",1
"The employer was being transported from one building to another in a golf cart. When the cart turned, the employee fell off and hit her head on the ground, resulting in a concussion.",1
"An employee was helping install a roll-up door on a semi trailer. The door had been installed and rolled up and down a couple of times when it suddenly fell onto the employee, who suffered possible neck and back bruising.",1
"An employee was operating a telehandler to lay a ductile iron pipe assembly down on its side. The pipe assembly spun as it was being laid down on the ground, causing the telehandler to roll onto its side. The employee sustained a right shoulder separation and head injury.",1
An employee was testing the suction on the vacuum of an ironer. The employee opened the interlock and placed a can to test when the machine cycled. They sustained an amputation of the right middle right finger between the first and second knuckle.,0
An employee had been pressure washing equipment and the floor using water heated to approximately 200 °F. The pressurized stream contacted the employee's rubber boot causing a burn to the top of their foot. The employee was hospitalized.,1
"While on a 5-foot high bakers scaffold, an employee was using a pneumatic staple gun to secure new insulation to the bottom of existing roof joists. He fell off the scaffold and impacted the plywood subfloor. The employee sustained a fractured left wrist, fractured ribs on the left side, a bloody nose, and bruising on the left side of the face.",1
"An employee provided CPR during a medical emergency. The recipient died, and the employee went into shock.",1
"An employee was operating a lathe machine to sand a bolt. The emery paper became caught on the bolt, pulling his right hand into the bolt and twisting his thumb. His right thumb was surgically amputated.",0
A propane delivery driver was on the catwalk of his trailer hooking up hydraulic hoses when he fell off the trailer onto the ground. The employee sustained a clavicle fracture and a collapsed lung.,1
An employee was changing a pump on the air scrubber unit in the chemical pump room. There was residual caustic in the pump that burned the employee's face and eyes.,1
"An employee's hand was resting on a pipe bender machine when it activated, causing the clamping die to pinch their right ring finger, resulting in amputation at the first knuckle.",0
"An employee slipped and fell while wrapping a pallet inside a trailer, resulting in a pinched nerve on his right hip. He was hospitalized.",1
"An employee was working as a store greeter when a suspected shoplifter assaulted them with a pool cue. The employee was hospitalized for a collarbone fracture, broken dentures, and an injury that required approximately 10 stitches.",1
"An employee was wiping down the dough chunker machine when the dough cutting blade came down onto the employee's finger, resulting in a right index fingertip amputation. The machine was guarded at the time.",0
"An employee had just finished repairing a light at a customer's house. He got into his truck and it became stuck. As he went to ask the customer for help, a pack of dogs attacked the employee, resulting in lacerations to the right arm and legs.",1
"An employee was helping a co-worker get a pipe bend loaded onto a forklift. He stepped in to attach a strap for stability and when the load was lifted with a crane, the bent pipe swung and struck the employee. He sustained skull fractures, a brain injury, and brain hemorrhaging.",1
"On December 13, 2022, at approximately 3:30 PM, a maintenance employee was operating a crane to assist with flipping a 2,500-pound steel platen for a cleaning task. The platen was on the forks of a forklift and was also strapped to the crane. When the crane began to lift the platen, the load shifted and the platen slid forward on the forks, striking the maintenance employee, who was standing next to the forklift. The employee suffered a contusion and swelling to the right thigh. The employee was hospitalized for surgery.",1
"An employee was using a chipping gun to open the hole on the castings of a part. The chipper gun became stuck in the hole and his finger was crushed between the casting and the blade, resulting in amputation.",0
"On December 13, 2022, a plant operator was walking by a pipe when he was exposed to leaking hydrogen sulfide gas and sodium hydrosulfide solution. Upon exiting the area, the employee lost consciousness, fell down the stairs, and struck his forehead and nose. The employee awoke at the bottom of the stairs in a puddle of water runoff. He was hospitalized with a forehead laceration, nose fracture, chemical inhalation, and chemical exposure to the eyes.",1
An employee was pulling a manual pallet jack when he lost consciousness and fell to the ground. He struck his chin on the ground and sustained a broken jaw.,1
"An employee was assembling a machine that pumps icing on products. Upon retrieving a part that fell into the machine, the spinning pump/motor amputated the employee's left ring fingertip.",0
"An employee was using an electric pallet jack to unload a truck. The pallet jack ran over a piece of wood, causing the steering column to swing and strike the employee's right leg. The employee's tibia was fractured.",1
"An employee was adjusting the stacking height of a curing bladder assembly in the open mold of a curing press. When the bolts on the closing clamp were loosened, the 60-pound assembly dropped and caught the employee's finger against the cylinder head. The employee's left middle fingertip was amputated.",0
An employee was closing a gate to go home at the end of the day when their finger was caught in the gate roller. The employee's left middle fingertip from the nail to the end of their finger was amputated.,0
"On December 13, 2022, an employee lifted a lid on a dump hopper and removed the magnetic grate. The employee was using a clipboard to push product on the sides of the hopper when the auger pulled in the clipboard and the employee's left hand, amputating two fingers and the thumb.",0
The injured employee had been using a powered industrial truck to unload a delivery of foam buns coming into the plant. He went to assist the operator of a carousel saw in getting a foam bun to go through the saw. The injured employee got on top of the foam bun which was on the saw table and his hands and knees depressed into the bun. His left kneecap was lacerated by the saw blade as the bun went through the saw. The employee was hospitalized with tendon damage that required surgery.,1
"An employee was cleaning and dislodging meat from the kettle in the production area when their middle finger became caught in the moving parts of the kettle, resulting in amputation.",0
"An employee was installing a bearing in a machine from a step ladder when they fell approximately four feet onto the floor, resulting in a possible facial fracture, and neck and left arm injuries.",1
An employee's glove became caught inside the end joint of a conveyor roller. His left little finger was amputated at the first joint.,0
"An employee was breaking metal with a hydraulic brake press when a storm caused the power to go out temporarily. When the power came back on, the employee started to break metal again and the auto gauge on the machine had reset. The employee sustained a right middle fingertip amputation.",1
An employee was going to inspect a gas line for damage after the gas line was struck during excavation. The employee was looking into the excavation site when he fell 3 feet into the trench and sustained a left wrist laceration that required surgery and hospitalization.,1
"An employee was operating a standup forklift when the vehicle struck a stationary pole, crushing his foot between the forklift and the pole.",1
"A ski instructor was giving a lesson to a guest when they encountered a variation in the snow. The instructor then looked back at the guest, lost balance, and fell. He sustained a fracture to the left tibial plateau.",1
"An employee fell off a fixed ladder, landed on the floor, and sustained fractures to the elbow and wrist.",1
"An employee was using a chain come-a-long to align a bolt hole so he could insert a bolt to secure a concrete form. The employee was ratcheting the come-a-long with his right hand and was holding the bolt with his left hand. The concrete form moved, and the employee's left index finger was pinched between the form and the partially inserted bolt. The fingertip was amputated.",0
"An employee was using a scissor lift to repair a displaced arm on a top rack. The employee fell from the scissor lift onto the floor; their left armpit was impaled by the metal webbing of the rack, resulting in stitches.",1
"An employee was carrying tools and parts to his car after servicing a machine at a school. He fell, landing on both hands with his fingers bent back, and sustained a laceration that required hospitalization and surgery.",1
"A temporary employee was cleaning the remaining beef from the hopper of a beef grinder machine when their hand was caught in the blade, resulting in a dislocation of the right shoulder and right wrist fracture.",1
"An employee was assisting some co-workers in lifting a support brace on a mill. One of the employees lost their grip, causing one side of the support brace to collapse and crush the injured employee's left hand.",1
An employee was descending a six-foot ladder when his foot slipped. He slid down the ladder approximately three feet and landed on his feet. The employee sustained a tibia fracture that required surgery and was hospitalized.,1
"An employee tripped over the 6-inch lip of a door frame, fell, and suffered fractures to two thoracic vertebrae.",1
"An employee was clearing a material jam on an embossing machine when his left hand became caught between two rollers, resulting in a laceration.",1
"An employee walked toward her cleaning cart, put her foot on the lower shelf, lost her balance, and fell to the floor. She suffered a head contusion.",1
"An employee was cleaning up and picked up a piece of plywood that was being used as a hole covering. The employee fell approximately 14 feet to the next lower level, resulting in a left wrist fracture and a right shoulder contusion.",1
"On December 14, 2022, an employee was descending a step ladder when they fell to the ground. The employee was hospitalized and underwent surgery for a hip injury.",1
A non-operational three-wheeled scooter was being towed in the parking lot when the employee steering the scooter fell off and fractured their right leg and ankle.,1
"On December 14, 2022, at approximately 4:30 AM, an employee was clearing a tray jam on a conveyance line when the jam pull tool swung back and struck the employee in the left eye, resulting in an injured cornea.",1
"An employee and a coworker were in a boom lift basket doing demolition work. One employee exited the basket to access a flat roof approximately 16 feet above the ground. The employee lost their balance and fell from the roof onto the ground, sustaining a fracture to the pelvis and two foot fractures.",1
"An employee was exiting a truck bed when they tripped and fell from the flat bed trailer onto the ground, resulting in multiple injuries to the arms, face, and chest.",1
A contracted physician was working in the emergency department when they used hand sanitizer with lavender in it. The employee experienced difficulty breathing and was hospitalized due to anaphylaxis.,1
An employee was entering a trailer when they stepped through a rotted floor board and sustained an ankle fracture. The employee was hospitalized.,1
"An employee was installing a base pan to the rails on a lift table. The conveyor was lowered to the home position and the employee's left foot was pinned underneath the table, resulting in a fracture.",1
"An employee had just finished repairing a shearing machine and began loading material into the machine. As he was positioning the material, the shear cycled, resulting in an amputation to the tip of the thumb. The machine was unguarded at the time.",1
A paper mill employee was attempting to clear paper from a tail cutting system when the blades made contact with employee's left middle and ring fingers. They sustained partial amputations below the fingernail.,0
"An employee was using a hose to clean out the scale conveyor belt when he noticed a piece of product stuck in the conveyor. While removing it, the employee's right arm was caught in the running conveyor, resulting in a right arm fracture and hospitalization.",1
"An employee slipped on the floor and fell, resulting in a fractured left hip.",1
An employee used a water-repellant chemical and experienced respiratory distress. The employee was hospitalized.,1
An employee was walking from her car to the clinic building when she slipped on the ice in the parking lot and fell. She sustained a sacrum fracture that required hospitalization.,1
An employee was removing a blue tarp from the roof of a mobile home to make repairs when he fell through a hole in the carport roof approximately 10-12 feet to the concrete below. He sustained a back fracture.,1
An employee was using the rowing machine to work out when she became ill and was taken to the hospital. The employee had an aneurysm.,1
An employee sustained a facial laceration while using a demolition saw to cut a six-inch clay pipe.,1
"An employee was pulling wires when an arc flash occurred, resulting in burns.",1
"An employee was operating a pallet rider when his right foot slipped off the vehicle. The pallet rider struck a guardrail, injuring the employee's leg.",1
"An employee was forced into the office with a gun during an armed robbery. The robber kicked and struck the employee with the gun, resulting in a facial fracture under the eye. The employee was hospitalized.",1
"On December 11, 2022, employees were drilling a new well using a drill rig. The injured employee had stepped off the drill rig platform to inspect the surrounding areas and ensure that the site was operating correctly. A 20-foot long steel drill rod struck the drill rig while being inserted into the carousel, which caused the rod to strike the injured employee in the back. The employee then fell face down into the fresh mud. The tube then began to raise and collide with the drill, causing it to come loose and fall on top of the injured employee. The employee sustained fractures of the right scapula, multiple ribs on the right side, the C7 vertebra, and T6-T7 vertebrae. The employee also sustained a brachial plexus avulsion injury.",1
"An employee was operating equipment to resize a welding wire. As the operator was guiding the wire into the machine, their finger became entangled in the wire, resulting in an amputation.",0
An employee was outside the store on the sidewalk roping off an area that was icy when he slipped and fell on the ice. He sustained a femur fracture.,1
"An employee was welding steel pieces that are approximately 120 inches in length, 90 inches wide, and 12 inches tall. An overhead crane was moving a part when the part fell and struck the employee's right leg. The employee was hospitalized with fractures to the femur and fibula.",1
An employee was driving a forklift in a warehouse. The forklift struck a support beam and crushed his foot. The employee sustained a laceration and several broken bones in his foot.,1
A crowd was leaving an activity. A person started firing a handgun into the crowd. An employee who had been working at the front desk was shot in the back. The employee was hospitalized.,1
"After an activity on December 14, 2022, at 10:51 PM, a person entered the hotel and started firing a handgun. An employee working in the lobby was shot in the right arm. The employee was hospitalized and required surgery.",1
An employee jumped from an excavator on a jobsite and fractured their femur.,1
"On December 14, 2022 at 11:00 AM, an employee was found at the worksite unresponsive. The employee was hospitalized.",1
An employee's hand was caught and lacerated in a conveyor belt.,1
"An employee was exiting a scissor lift. His right little finger hit a cable on the lift, and he suffered a fingertip amputation.",0
An employee was in a man bucket removing a bridge beam when the wind changed direction. This caused the beam to strike the man bucket and pin the employee in the bucket. They sustained bilateral femur fractures.,1
An employee was using a ladder to replace a clock gauge on a fueling tank. The ladder slipped and the employee fell and struck his head on the concrete and tile floor. The employee sustained a right shoulder blade fracture and brain hemorrhaging at the back of his head.,1
"An employee was feeding a piece of lumber onto a machine when the lumber kicked back, striking his fingertips between another piece of lumber. His right index fingertip was amputated and the employee was hospitalized.",1
"An employee was cutting a PVC pipe with a hand grinder when the grinder kicked back, lacerating the employee's right hand and abdomen.",1
"An employee was cutting a part on a band saw. The saw caught his glove and pulled in his finger, its blade amputating two joints of his left little finger.",1
An employee sustained an inguinal hernia while moving a patient from a bed onto a lift.,1
"On December 15, 2022, at 5:40 AM, an employee was walking down a paved road to get to work from the parking lot. The employee slipped, fell, and struck his head, resulting in a subdural hematoma.",1
"An employee was cutting a piece of polytetrafluoroethylene into two halves with a portable table saw. A piece kicked back and crushed the tip of their left middle finger, resulting in an amputation to the distal end of the finger.",1
"An employee was sanding a steel tube with his right hand when his left ring finger which was inside the steel tube was crushed, then amputated.",0
"An employee was using a deli meat slicer when her right hand contacted the slicing blade, resulting in partial amputations to her right middle finger, ring finger, and little finger.",0
An employee was rinsing out a batter machine. He went to clear a piece of meat on the inlet of the pump when his fingertip was amputated. The employee was hospitalized and underwent surgery.,0
"An employee was troubleshooting a mechanical issue under equipment when his clothing became caught in the power take off (PTO) of an industrial concrete truck. The employee sustained fractures to the neck and back, a dislocated left shoulder, and lacerations to the head, face and body.",1
"An employee was changing bolts on a two-hole splice plate of an erected steel beam. After removing the second bolt, the bull pin dislodged, causing the beam to fall. The employee fell approximately eight feet off the beam and landed on a pipe spool below. The employee sustained fractures to the left clavicle, left wrist, and a laceration above his eyebrow.",1
"An employee was walking to an anchor point on a roof to tie in. While trying to move a roll of underlay out of the way, the employee slipped and fell, landing on the ground and suffering a lower back fracture.",1
"An employee slipped on ice in a parking lot, fell, and suffered a fractured right femur.",1
An employee was walking in a stairwell when her left hip struck the metal banister of the stairs. She was hospitalized with a fractured hip.,1
"An employee was operating a forklift when it slid on a recently cleaned floor. The employee's left foot was caught between the forklift and a chemical drum, resulting in a fibula fracture.",1
"On December 15, 2022, an employee was checking inventory in the warehouse when a pallet racking shelf failed, causing boxes to fall from the top rack. The employee was found on the floor with head trauma.",1
"On December 15, 2022, an employee was operating a hydraulic press. The machine actuated while the employee's hand was on the part being loaded into the machine, resulting in an amputation to the right middle and index fingers.",0
An employee was getting into position to apply a grounding cable to a de-energized power line conductor. Induced voltage formed by a nearby electric field shocked and burned the employee's right hand and right foot.,1
"An employee was installing a first-stage impeller in a centrifugal chiller during reassembly. The impeller moved forward quickly and crushed a finger on the employee's right hand, causing a fingertip amputation without bone loss.",1
"An employee was preparing to move a 2,800-pound mold using a sling lifting chain and overhead crane to insert a mold plug. Once the end of the mold was 12 to 16 inches from the floor, the employee stopped the crane and moved to insert the mold plug into the mold. The mold slipped out of the chains onto the employee's left foot, causing crush injuries to the first and second toes. The employee was hospitalized.",1
"An employee was assisting in pushing a cart when they tripped and fell on the floor, breaking their right hip.",1
An employee was walking in a staging area when a nearby forklift that was backing up turned and ran over the employee's right foot. The employee sustained a broken foot and the dislocation of two toes that required surgery.,1
An employee was using a shaping machine when their hands were caught between two rollers. The machine was unguarded at the time.,1
"An employee was descending a ladder that was set on a deck when the ladder kicked out from underneath him, causing the employee to fall approximately eight feet to the ground. The employee sustained a leg fracture and dislocated shoulder.",1
"An employee had just finished washing out a frac tank. While descending the frac tank steps, the employee lost his footing and fell forward, causing his right hand to get stuck between the handrail and the handrail support beam. He sustained a right little fingertip amputation.",1
"On December 16, 2022, an employee was feeding a book through a machine and guiding the wire when their left index finger was amputated at the first knuckle.",0
"An employee was performing the caging process on a new brake chamber. The employee had just aired up the chamber and was putting the caging bolt into the end of the chamber when the internal plates compressed. The bolt pulled against the chamber end, catching the employee's fingers against the chamber. The employee's left index finger and thumb were amputated at the knuckle.",0
"An employee was servicing a lift table by adding hydraulic fluid. The table came down on his left hand, fracturing three bones.",1
"An employee was cutting a catalytic converter with a shear machine. The shear cut the employee's fingers, causing partial amputations.",1
"In the warehouse, an employee was picking a detail part from a bin while standing on the third step of a stock-picking ladder cart. She fell off the ladder, hitting it on the way down, and landed on her right side. The employee sustained eight fractured ribs on the right side and a laceration to the right thigh.",1
An employee was walking in a warehouse to get a forklift when he was struck by another forklift that was backing up. The employee sustained a crush injury to the foot.,1
An employee was walking in the medical library carrying a completed research document. She fell to the floor and sustained a pelvic fracture.,1
"An employee was standing on a step ladder, cutting a steel pipe. The pipe fell, struck the ladder, and kicked it out. The employee fell three feet and sustained a broken left arm that required surgery.",1
An employee was removing an extension ladder from the rack on top of a van while standing on the van's ladder. The employee lost his balance and dismounted the ladder to the ground. His foot became caught in the utility ladder causing him to land wrong and sustain an ankle dislocation and laceration.,1
"An employee was completing a final load securement check while standing on the rear bumper of his tractor trailer. Upon closing the trailer door, the employee jumped down from the bumper and his hand slipped off the door strap. The door crushed his left arm which was resting on the bed of the trailer, resulting in blood vessel damage.",1
"An employee was on a ladder, installing corner beads on a soffit. The employee fell from the ladder to the concrete floor, suffering a broken left hip and a broken left forearm.",1
"On December 16, 2022, an employee was working on a second-level roof, installing underlayment and shingles. The employee slipped off the roof and landed on the grass, suffering injuries to both wrists. The employee was hospitalized.",1
"An employee was installing metal roof panels when the wind caused the employee to lose their balance and step backward. The employee fell 16 feet from the roof to the ground, sustaining a hip fracture.",1
"On December 16, 2022, an employee was repairing the deck of a one-story roof. They fell through a hole that was created during the repairs and landed on a concrete floor. The employee sustained fractures to facial bones, their left shoulder, and legs. They also sustained a bruised hip.",1
An employee was handing a hose to an employee from the top of a future basement area when they slipped and fell approximately 10 feet through the opening. The employee sustained a back fracture and head laceration.,1
"An employee was handling and herding cattle when an aggressive one began approaching. Upon exiting, the employee fell outside of the caged area, resulting in a left forearm fracture.",1
"An employee was walking up steps when he slipped and fell down the steps, resulting in a right leg fracture. The employee was hospitalized.",1
"An employee was loading a 60-pound stainless steel part onto a soup kettle fixture. The part fell onto his thumb, resulting in a possible amputation.",1
An employee was cleaning the bathroom in the office of a storage facility. Inhalation of fumes from a cleaner caused respiratory issues and the employee became ill. They were hospitalized.,1
A temporary employee was on a ladder installing HVAC vents in a restroom. The employee fell off the ladder and was hospitalized with a concussion.,1
"An actor was finished performing for the evening and was coming down from a performance platform. He rolled his ankle on a step and fell 8 feet from the platform to the concrete floor, sustaining a concussion and lower back fracture.",1
"An employee was pulling a flat cart loaded with material from a jobsite. When he reached the ramp to access the lower level of the dock, the material's weight shifted forward and the cart pinned the employee against a wall at the bottom of the ramp. The employee sustained three transverse processes fractures and a laceration of the nose and the back of the head.",1
An employee was assisting with the erection of a steel beam. As the beam was being lifted it came loose from the choker and began to fall. The employee went to push the beam out of the way and it struck him in the throat.,1
"An employee had been chaining a 6-foot long, 600-pound I-beam so it could be lifted. As it was lifted, the beam slipped from the chain and struck the employee, causing a fractured shin.",1
"An employee was preparing to place concrete into a form when the concrete pump truck shifted and the outrigger sunk in the soil. This caused the hose to drop and strike the employee in the lower leg, resulting in fractures.",1
"On December 16, 2022, at 12:45 PM, an employee was using an electric pallet jack to move materials in a recycling area. As he was walking backward, he became pinched between the load he was moving and a pallet full of other materials. The pallet jack rolled over his foot, resulting in foot fractures that required hospitalization and surgery.",1
"An employee was reaching down to grab a bag of chips to place it on the infeed conveyor for packing. The employee's hand contacted the edge of the conveyor and was pinched between the conveyor and the frame, resulting in an amputation to the right middle finger.",1
"An employee was working with a crew to troubleshoot voltage problems at a business. While testing for current, the employee experienced an arc flash and sustained first-degree burns to the face and neck. The employee was hospitalized.",1
"On December 17, 2022, an employee was operating an electric pallet jack to move materials when his foot and leg were pinned between the pallet jack and a wall. They sustained a fracture to the lower right leg that required hospitalization.",1
"An employee was moving a bundle of steel when the bundle shifted and pinched the employee's fingers on the left hand, amputating the two fingertips.",0
An employee was removing a large auger from a meat grinding machine when the auger slipped out of the lifting device and onto the employee's leg. He sustained a leg fracture.,1
"An employee was stepping onto the stairs to go up and began to turn around. He lost his balance and fell on the floor, resulting in a hip fracture.",1
"An employee was walking when they tripped and fell, resulting in a shoulder fracture and dislocation.",1
"Two employees were transporting a transformer from a tow boat to the plant using a forklift. The parking break failed and the vehicle rolled over the employee's ankle, resulting in a fracture and hospitalization.",1
"A mail carrier was delivering mail when she was attacked by a dog, causing her to fall to the ground and hit her head on the concrete. The employee lost consciousness and was hospitalized with a concussion and an internal head injury.",1
"An employee was kneeling down to remove thread protectors when a forklift ran over his foot, resulting in a toe fracture.",1
An employee was walking out of a resident's room when they slipped on water on the floor and fell. The employee was hospitalized after striking their head on the floor.,1
"An employee was walking backward while abrasive blasting steel pipe on a stationary flat bed. The employee tripped on the hose of the abrasive blaster and stumbled backward, blasting air and media (coal slag) into his left knee.",1
"Two employees were cleaning the making belt and the mill unit. Upon lowering the temperature, steam discharged from the hose, causing the hose to burst and spray the injured employee. The injured employee fell on the floor and sustained second-degree burns to the neck and shoulders.",1
An employee was delivering food to a customer's home when they slipped on ice. They were hospitalized for foot fractures that required surgery.,1
"An employee was working at his desk. When he got up, his foot became caught on the wheel of his office chair, causing the employee to fall. He sustained a left kneecap fracture.",1
"An all-terrain forklift was moving in reverse as an employee was walking in the same direction. The rear tire rolled over the employee's right foot, resulting in injuries.",1
"An employee was cleaning the sill on a furnace when a nearby cement barrier was struck by a crane. The barrier fell over and landed on the employee's foot, resulting in crush injuries that required surgery.",1
"An employee was walking to the kitchen area when they slipped and fell onto their right hip. The employee was hospitalized with a right hip injury, that required surgery.",1
An employee was welding a door on a floating barge when the clean out box door slammed on his left arm. He sustained a wrist and elbow fracture that required surgery and hospitalization.,1
An employee was using a butcher paper roll with a serrated edge when they sustained a partial thumb amputation. They were hospitalized.,1
"On December 19, 2022, an employee was on a ladder using a feed truck auger to fill feed into a bin. The employee fell approximately 15 feet from the ladder to the ground, resulting in a fracture of the C4 vertebra and left shoulder.",1
"An employee was using a circular saw to cut a 2x4 for concrete forms. When he went to finish a cut on a 2x4, the saw kicked back and the blade made contact with his left thumb, causing an amputation to the tip.",1
"An employee was working in a trench box directing the placement of bedding. A 2' x 2' piece of dirt broke off from the front of the trench, rolled down into the box, and struck the employee's lower left leg. The employee was hospitalized for a tibia and fibula fracture.",1
"An employee pulled up to the access control arm of the employee parking lot. Her window was frozen shut so the employee opened her vehicle door and stepped out to scan identification. Her vehicle rolled forward and pinned her leg between the vehicle door and the frame of the vehicle. She was hospitalized for a left tibia fracture, a fractured left femur, a laceration to the back of the left leg, and tendon damage to her left knee area.",1
A temporary employee was descending a ladder when his foot slipped and he fell approximately five feet to the ground. The employee sustained a kidney laceration.,1
"An employee slipped on an icy walking surface outside a building, fell, and  suffered a broken leg. The employee was hospitalized.",1
An employee was getting out of their car to report to work when they slipped and fell on the ice in the parking lot. They sustained a tibia and fibula fracture.,1
"An employee was helping to lift a press roll in to fix an issue that was occurring. A co-worker lost their grip and the press roll fell onto the injured employee's left index finger, resulting in a crush injury and amputation.",0
"In the early morning, an employee was driving a golf cart in foggy weather when the cart struck a vehicle, resulting in an injury.",1
An employee was working on a construction site when he fell from a four-story porch to the concrete below. The employee sustained a concussion and lacerations to the legs.,1
An employee was playing basketball with patients and fell to the floor. The employee sustained a hip fracture and was hospitalized.,1
An employee was removing a tarp from a 20-foot pile of road salt. He fell approximately 10 feet down the face of the salt pile and sustained a lower back injury at the bottom of the pile.,1
"An employee was conducting start-up procedures for a fine wire drawing machine when the steel wire began to coil inside the machine. The employee went to clear the wire when their finger contacted rotating parts, resulting in a fingertip amputation.",0
"An employee was removing bushings from an electrical breaker when it rolled over onto him, resulting in shoulder blade fractures.",1
"An employee was walking through the endocrine area when they slipped on standing water and fell, resulting in a right femur fracture.",1
"An employee was retrieving an item from the passenger seat of a vehicle. Upon shutting the passenger door, the employee's finger was caught in the door, resulting in an amputation to the left index finger.",0
An employee was clearing a jam in the chipper when his glove became caught on a piece of wood and his hand was pulled into the chipper blades. The index and middle fingers on their left hand were amputated.,0
"On December 19, 2022, an employee was using a hammer and screwdriver to unjam a brass casing from the seating area of a pistol loader. The screwdriver struck the primer and caused the casing to explode. Shrapnel from the casing caused lacerations to the employee's abdomen.",1
"An employee was operating a fixed-position electromagnetic drill to drill holes in an angle iron. The employee's glove became caught in the point of operation of the drill press, resulting in a left thumb degloving injury, which was amputated.",0
"An employee pulled their truck into a self-loading bay to fill up with slag. He then went up to a second-level control room and used a metal rod to reach out of the window and line up the chute with the trailer hatch. The employee fell from the window and landed on the concrete floor approximately 12.5 feet below. He sustained injuries to the shoulder, ribs, and pelvis.",1
An employee was working near an open flame heater when the flames contacted the employee's clothing and caught fire. The employee sustained second-degree burns to the hands and third-degree burns to the lower back.,1
An employee was reversing an electric sit-down forklift when their hand was crushed between the forklift and a nearby pallet. The employee's left ring and middle fingers were partially amputated.,0
"An employee was picking up 10-pound steel blanks from a conveyor when a blank fell, resulting in amputation of the employee's little finger at the first joint.",0
"Employees were moving a 397-pound plotter printer over a doorstop/threshold when the injured employee's hand became wedged between the bottom of the plotter and the doorstop. As the employee pulled his hand back, he sustained a partial amputation of the left middle finger.",0
Employees were working on a drilling rig. They were putting bushings in with a hydraulic hoist when the cable became tangled in the derricks above. The hydraulic hoist cable came loose and threw the injured employee 15 feet into a piece of machinery used to screw together joints of drill pipe. The employee lost consciousness and sustained a head laceration that required staples and a knee laceration that required surgery.,1
"An employee was clearing a jam in a machine when his arm was caught in the gears, resulting in a skin avulsion.",1
"On December 19, 2022, an employee was walking toward a portable conveyor belt when he tripped on the wheel of the conveyor belt and fell. The employee was hospitalized and had surgery for a hip fracture.",1
"On December 20, 2022, an employee was moving a steel coil by hand when it fell over onto his right leg, resulting in fractures to his leg, ankle, and foot.",1
"Employees were setting an 18-feet-deep trench box. When the trench box was lowered into place, the injured employee began removing the rigging. He lost his footing on the box and fell into the trench, sustaining an ankle dislocation.",1
"An employee was changing out of their coveralls when they fell to the ground, resulting in a broken femur.",1
"An employee was completing a training activity with a mentor on a molten zinc tank. The employee stepped on the tank lid and his left foot went into the tank, causing third-degree burns to the employee's left foot up to his calf.",1
"An employee was sitting in the driver's seat of his roll-off box truck when a garbage truck that was next to his truck began dumping at the landfill. A part of the other truck's hydraulic system ruptured and the pressure forced the hydraulic hose and a piece of conduit from the other truck to strike the employee's passenger door glass. The glass shattered and hydraulic oil entered the cab of the injured employee's truck striking his right side, face and eye.",1
"An employee was installing a water treatment system. The system was being pressure tested before being tied in. During testing, the valve and gauge ruptured, causing the employee to fall into a nearby trench. The employee sustained a fractured orbital bone and lacerations and was hospitalized.",1
An employee was unjamming corrugated cardboard from a conveyor when their arm was caught in the conveyor. They were hospitalized with second-degree burns on their arm.,1
"An employee was standing on an A-frame ladder, adjusting a rail on an overhead shop door with a pry bar. The pry bar slipped from the rail, the ladder became unstable, and the employee jumped to the concrete floor below. He landed on his feet, resulting in a compound fracture to his left foot.",1
"A temporary employee was cleaning peanuts when their right wrist area was burned by hot water, resulting in hospitalization.",1
"An employee was attempting to connect dollies and crushed his right ring finger between two air cans, resulting in a partial amputation.",0
"An employee was performing lavatory servicing work for an aircraft. A fuel truck struck the employee, who suffered a compound fracture of the left femur.",1
"On December 20, 2022, an employee was working with a machine. He had just placed material into the machine's drilling area, and was lowering the material hold-down to start the drilling process, when the hold-down caught his hand. The rotating drill bit contacted his right ring fingertip, amputating it in the fingernail area.",0
"An employee was cutting up a pipe pile template. A steel beam rolled and struck the employee's left leg, breaking their tibia and fibula.",1
"An employee was replacing a fitting on a storage tank. The employee was utilizing a tool that created a spark and flash fire, causing the employee to sustain burns. They were hospitalized.",1
"An employee was transporting sheet metal into a laser cutter. The metal slipped and fell on the employee's foot, lacerating it.",1
"An employee was using a sliding panel saw to cut a panel for a cabinet. As the employee cut the wood, the wood was retracted past the blade, then caught by the blade and thrown at the employee's right hand. The employee suffered an amputation to the middle finger.",0
An employee was removing a bolt from a band clamp on an exhaust pipe. The wrench slipped off and the exhaust pipe amputated the employee's finger at the knuckle.,0
"A maintenance technician was repairing a sensor in a car wash tunnel. The employee's jacket became entangled in the conveyor and it pulled him up, resulting in severe injuries to the right hand and forearm as well as a partial finger amputation.",1
"An employee was moving cattle from a pen to a tub when a bull got around the cattle guard. The employee climbed over the cattle guard to move away from the bull and the bull struck his arm, resulting in a fracture.",1
"An employee was getting off a trailer in the yard when they fell to the pavement, resulting in a broken right hip.",1
An employee was walking in a warehouse when his foot was ran over by a forklift. He was hospitalized with a right foot fracture that required surgery.,1
"An employee was attaching the paddle bone pull to remove the bones from a meat carcass. The paddle bone pull came down on the employee's finger, severing it. The tip of the finger was later reattached.",0
"On December 20, 2022, an employee was servicing a forklift and replacing the hydraulic hoses when the mast moved backward and pinned the employee. They sustained internal bleeding and bruised organs.",1
An employee was making a delivery to a customer when he tripped on a four-inch rise on the floor. He fell forward into a forklift and sustained a four-and-a-half-inch laceration to the forehead and a neck vertebra fracture. The employee was hospitalized.,1
"An employee was operating a standup forklift to load pallets onto manual lines when their foot was pinned between a pole and the forklift, resulting in a crush injury.",1
"On December 20, 2022, an employee was cutting bones from ribeye steaks using a band saw when their right ring finger contacted the blade, resulting in an amputation to the finger.",1
"An employee was working on the second level of a double drop trailer when he took a step backward, and slipped and fell three feet to the ground. The employee sustained a hip fracture.",1
An employee was inspecting and repairing a tank when they fell seven feet through the floating aluminum roof of a tank to the tank floor. They sustained a laceration near the right ear and a contusion on the back of the head.,1
"An employee shook a can of spray paint and sat it down on a work bench. When he went to use the paint minutes later, the paint can exploded, resulting in burns and cuts to his face and ear.",1
An employee was bending steel for cattle panels when he got his finger caught between the metal and the press. The employee sustained a right index finger fracture that required surgery.,1
An employee was working on a bagger machine when his left ring fingertip was amputated.,0
"An employee was changing a leaking valve in the bleach department. After the employee disconnected the airline, the acid in the line sprayed onto their chin and neck. The employee was hospitalized for first-degree chemical burns.",1
"An employee was climbing down from the back of a stake body truck using the ladder that is part of the truck. At the last step, he lost balance and fell to the blacktop. The employee hit their head, lost consciousness, and felt dazed once they woke up. The employee was hospitalized.",1
"An employee was on a ladder about 10 to 15 feet off the ground, helping install a window from the outside of a home. He fell backward off the ladder, landing on the ground and suffering broken ribs and a broken pelvis.",1
An employee was in the bucket of a bucket truck stringing a service wire over the roof of a building. The employee stepped out of the bucket onto the roof and fell through the roof. The employee sustained fractures.,1
"An employee was using a battery powered hand saw to do a sink cutout on a laminate top when the saw contacted his right hand. He sustained cuts on his right thumb, index, and middle finger.",1
An employee was on a step ladder while putting a folding table onto a shelf. The employee fell from the ladder and impacted the ladder and the ground below. The employee was hospitalized with fractured ribs and an injury to the kidney/flank.,1
"An employee was driving an end-rider powered industrial truck to retrieve a case of soda. Upon stepping off the vehicle, the employee's ankle was pinned between it and the pallet, resulting in an ankle fracture.",1
"On December 21, 2022, an employee was unjamming a smoke tower when they came in contact with the chain. The employee sustained a right ring fingertip amputation. The machine was guarded at the time.",0
"An employee was walking through a kitchen when she slipped on the recently-mopped floor and fell, resulting in a left femur fracture.",1
"An employee was helping move a load of steel bars. The load shifted, causing the support to break; the bars then pinned the employee's left arm and broke it.",1
"An employee was working with lumber and went to toss a scrap board into the dumpster. He was holding the board against his side as he tossed the board, causing a 10-inch sliver to catch his skin and puncture the side of his chest.",1
"An employee was walking when they tripped and fell to the floor in an area where floor repairs were in progress, resulting in a potential hip fracture and hospitalization.",1
"An employee was maneuvering an 85-foot vertical pipe into position on an oil rig when it slipped from the clamp and fell onto his foot, resulting in amputation of the big toe.",1
An employee tripped while holding a glass. The glass broke and caused a laceration. The employee was hospitalized.,1
"An employee was entering an elevator when the elevator doors closed on a chair that the employee was holding. The employee lost his balance and fell to the floor, resulting in a hip injury.",1
"On December 21, 2022, at approximately 5:10 PM, a zoo keeper was attacked by a North American black bear that escaped his enclosure. The employee was hospitalized for clavicle fractures, vertebrae fractures, a wrist fracture, several lacerations across the lower back, abrasions, and an open head wound.",1
"On December 21, 2022, an employee was using an alcohol spray bottle and a rag to clean the inside of a mobile liquid transfer pump during a product changeover. The pump activated and the rotor amputated the employee's right second fingertip.",0
"An employee was using a lathe machine. As he moved to take material out of the machine, the shifter lever was engaged and the chuck rotated slightly forward. The chuck guard fell with the rotation of the lathe, struck his right middle finger, and caused an amputation at the last joint of the finger.",0
An employee was trying to deescalate an interaction with a patient. The patient kicked the employee in the chest. The employee was hospitalized with chest pain.,1
An employee was performing opening duties at a car wash when he slipped on ice and fell on the sidewalk. He sustained a right leg fracture.,1
An employee was handling a tree during transplanting operations. The tree kicked back and pinched the employee's left middle finger against the backhoe's bucket. The fingertip was amputated.,0
"An employee was walking when they slipped on a slick floor and fell, resulting in a knee fracture.",1
An overhead door stopped working in the warehouse. Employees were working to manually close the door when it gave way. The door hit an employee in the head causing a concussion. The employee's foot was broken as well.,1
"An employee was unloading an appliance delivery truck using an appliance hand truck. When beginning to push the hand truck with appliances loaded on it, it fell, causing the appliances to fall on the employee. He sustained injuries to the wrist and hand.",1
An employee was unloading a fiber conduit reel from a utility trailer when the reel tipped over and struck the employee's leg. They were hospitalized for a left femur fracture.,1
"An employee was taking the garbage outside when they slipped on snow/ice and fell in the parking lot, resulting in a right hip fracture.",1
"An employee was standing on some steel, approximately 2 feet off the shop floor, while marking it for year-end inventory. When he stepped down, his left leg buckled and he fell. The employee sustained a fractured left ankle and a possible left leg fracture.",1
An employee was retrieving paper from the cutter when his little finger was caught between the clamp and the blade. The employee sustained a fingernail avulsion and fingertip amputation.,0
"An employee was signaling a forklift to offload material. He told the forklift to stop, got beside the material, and then fell, grabbing onto the tubes on the forklift. The material then fell on him, breaking his foot, his collarbone, and a rib and lacerating his forehead.",1
"An employee was offloading materials to deliver to a customer when they fell from the back of a box truck to the pavement. The employee sustained a clavicle fracture, fractures to ribs 2-9, and a head laceration.",1
"An employee was guiding a winch cable when they were caught between the cable and a hydraulic cylinder, resulting in amputation of two fingers on the left hand.",0
"An employee was cleaning a CNC machine with compressed air when he was caught in a pinch point between the moving table and the machine's upright support. The table moved, and the employee sustained multiple puncture wounds to their legs.",1
"On December 21, 2022 at 12:07 PM, an employee was getting out of a truck at the end of his shift when he fell in the rear truck lot and sustained a hip fracture. The employee was hospitalized.",1
An employee was departing her work station for her break and was struck from behind by a pallet being carried by a forklift. The employee was knocked to the concrete ground and sustained rib fractures and bleeding near the mouth. She was hospitalized.,1
"An employee was troubleshooting a packaging machine. Upon feeling the plastic seal head to see if it was warm, clean, and sealing properly, the machine cycled and the employee's left thumb was caught between the seal head and the mold plate. She sustained a thumb fracture that required surgery.",1
"An employee was using a pneumatic pincer to secure an ear clamp onto a juice hose fitting. The employee inadvertently placed the pincer head on the tip of their right little finger and activated the crimper, which pinched their fingertip. The employee sustained a partial amputation of their right little finger.",1
"An employee went to use a forklift but the forklift would not start. The employee tried shifting the forklift's propane fuel tank. Propane got on his gloves and burned his hands, resulting in blisters to both hands.",1
"On December 21, 2022, an employee was loading and unloading a flatbed truck. The employee jumped from the ground to get onto the trailer but did not clear the trailer and his knee struck it. The employee sustained a laceration to his knee.",1
"An employee was operating a clamp lift truck to transport freight when it overturned, resulting in a severe leg injury.",1
An employee was walking in the facility when they fell to the floor and sustained a hip fracture. They were hospitalized.,1
"While installing a stove and fireplace, an employee was working on a steel roof that was approximately 22 feet high. The employee slipped and fell off the roof to the ground below, resulting in fractured ribs and a fractured skull. Fall protection was not worn at the time of the incident.",1
"An employee was helping to move an aircraft into a hangar when his fingers were crushed between the hangar door handle and the hangar door, resulting in fractures and an amputation.",1
"On December 22, 2022, an employee was removing reshores from new concrete when the inner pipe became stuck inside the outer pipe. To dislodge the inner pipe, the employee struck it against the wall. Their finger was inside one of the holes on the pipes and when it came free, the employee sustained a partial amputation of their right middle finger.",0
"An employee was driving a pickup truck and reached to open a nearby gate while in the vehicle. The gas pedal was pressed and the employee's right arm was caught between the gate and pickup truck door, resulting in a forearm fracture.",1
"An employee was mopping the front entrance floors when they slipped and fell on melted snow that had created a puddle, resulting in a femur fracture in two places. The employee was hospitalized.",1
"An employee was walking in an aisle when a forklift backed out of the dock and struck the employee resulting in fractures to their left arm, right leg, and right ankle.",1
"An employee was preparing to put a filled unit load device (ULD) onto an inflow rack. The ULD was pressed against one of the locks, so the forklift operator lifted the ULD so that the injured employee could move the lock. As the ULD was moved by the forklift, the employee's middle fingertip was pinched between the dolly lock and the unit load device, resulting in a left middle fingertip amputation.",1
An employee was driving a forklift when it struck another forklift in the loading dock area. The employee sustained a broken bone in his left hand.,1
"An employee slipped on a wet, recently mopped floor and fell. The employee's head struck the floor, causing a concussion and a brain bleed.",1
"An employee was on a 6-foot ladder to access cleaning supplies. He lost his balance and fell, resulting in vertebrae fractures that required hospitalization.",1
An employee's hands became caught in a dough mixer lid. The employee sustained multiple fractures to the right hand and a laceration to the left hand.,1
"An employee was trying to open the forks on a forklift. The forklift's controls were adjusted and the forks came down, crushing the employee's right ring finger. The finger was amputated.",0
An employee was trimming wood pieces when they observed sawdust escaping from the crevices of the 24-inch jump saw. The employee was clearing the clogged sawdust at the machine's dust port when three fingers on their right hand were struck by the saw blade. The ring and little fingers were amputated and the middle finger was lacerated.,1
"On December 22, 2022, an employee slipped/tripped on dunnage and fell resulting in a fractured right hip. The employee was hospitalized.",1
"An employee was working on a production line when their arm was caught in the wind-up machine, resulting in a left arm fracture.",1
"On December 22, 2022, an employee was working on a sidewalk snow removal team and was hospitalized for frostbite to the thumb and middle, ring, and little fingers on his right hand and the middle finger on his left hand.",1
An employee was walking down an aisle when she tripped and fell face-forward to the ground. The employee was hospitalized with injuries to her knee and nose.,1
"An employee was using a pallet jack to move product from a truck to a customer location. A box on the top of the pallet shifted while the pallet was going over the bump of a dock plate and fell on the employee’s head. Afterward, the employee experienced numbness in their limbs.",1
An employee was picking up trash in the parking lot when they were struck by a vehicle pulling out of a parking spot. The employee fell to the ground and was hospitalized for brain hemorrhaging.,1
A mail carrier was hospitalized after sustaining frostbite on their hands.,1
"An employee on their lunch break was walking down stairs when they tripped, fell, and landed on the landing between the two floors, resulting in a leg sprain.",1
"An employee was on the top deck of a mobile stair unit, trying to access the main cabin door of an airliner, when a baggage tug began to pull the stair unit away. The employee lost his balance and fell from the top of the unit sustaining multiple broken bones and contusions.",1
An employee was delivering mail when they developed frostbite on both hands; they were hospitalized.,1
"An employee was performing a restringing activity on a line. After the employee cut the line, his scissors fell into a 200-degree F water bath. He retrieved the scissors and hot water entered a tear in his glove and burned his hand.",1
"On December 23, 2022, an employee sustained frostbite to both hands while delivering mail.",0
"An employee was removing trees from a power line when they were struck in the back by a piece of wood, resulting in a broken clavicle and broken ribs.",1
An employee was delivering mail when they were hospitalized for frostbite on six fingers.,1
An employee contacted a downed power line and received an electric shock. The employee sustained electrical burns to the right hand.,1
"An employee was using a ladder to retrieve a box of shoes off a shelf when she fell from the ladder and her fight foot and ankle hit the shelf, resulting in a fractured ankle.",1
"An employee was getting out of the car when they slipped on ice and fell in the parking lot, resulting in a right leg fracture.",1
"An employee was walking out of a building when she tripped on the carpet and fell onto concrete, resulting in a broken left elbow and left humerus.",1
"An employee was working in a picking room when they fell on a buildup of ice, resulting in a leg fracture.",1
"On December 22, 2022, at approximately 8:50 AM, two employees were cleaning an above ground, horizontally placed, 45,000-gallon gasoline tank. The two employees were standing on top of the tank’s working platform when the tank exploded. Both employees were blown away from the platform and landed on the ground. Employee 1 was treated for a broken ankle and released. Employee 2 was hospitalized for a head injury.",1
"An employee was lifting and moving a 240-pound wheel riser when the wheel riser fell on employee’s hand, resulting in an amputation of the left middle finger.",0
"An employee was entering the deli department when she tripped and fell, resulting in a right hip fracture.",1
"An employee was working with a crew on the rig floor tripping pipe into the hole. They applied the manual tongs as and the line that supplied air to the clutch froze. When the driller started the draw works forward, the rotary turned unexpectedly. One of the snub lines, which anchor the tongs in place, was secured to the rig but not to the tongs. The tongs turned and struck the worker in the chest and the employee sustained collapsed lungs, a bruised liver and kidneys, a damaged spleen, and broken ribs.",1
"An employee was using a two-step ladder to stock shelves. Upon stepping off the ladder, she fell onto the floor, landing on her side and wrist. The employee was hospitalized for a swollen wrist and compressed vertebral disc.",1
"An employee was walking down a parking lot ramp when she slipped and fell on ice, resulting in a leg fracture. She was hospitalized and had surgery.",1
"An employee was removing a shackle that a cow was hanging from when their finger was caught in a pinch point, resulting in a partial amputation to their right index finger and a fracture to their right middle finger.",1
"An employee was investigating a water leak when they slipped and fell on the ice, resulting in an arm fracture.",1
"On December 22, 2022, a rural mail carrier developed frostbite to his fingers. He was hospitalized",1
An employee was descending stairs during a fire alarm. The employee developed asthma-related shortness of breath and was hospitalized.,1
"An employee was stocking milk in the dairy cooler. He slipped in the cooler and fell, sustaining a femur fracture that required hospitalization.",1
An employee developed frostbite to the hand while delivering mail. The employee was hospitalized.,1
An employee developed frostbite to an index finger while delivering mail. The employee was hospitalized.,1
"At 5:41 p.m. on December 24, 2022, an employee slipped and fell while walking from a floor mat onto a concrete floor at a store entrance. She suffered a broken left femur.",1
An employee was walking into a building when a light went out. She fell onto a concrete loading dock and suffered a broken left femur.,1
"An employee was sweeping the floor when an altercation began with a building tenant. The employee was bitten, resulting in an amputation to the tip of the left thumb.",0
"An employee was carrying sanitary supplies to the bathroom when they tripped over a door jam and fell to the floor, resulting in a hip fracture. The employee was hospitalized.",1
"An employee was walking to their car during a break when they slipped on ice and fell to the ground. The employee was hospitalized with a hip injury, which required surgery.",1
"After shoveling sidewalk snow for five hours in 2-degree weather, an employee developed frostbite to all five fingers on their right hand, as well as the left index and ring fingers. The employee was hospitalized.",1
An employee was repairing de-icing trucks and equipment and connecting diagnostic equipment to the machinery. The employee developed blisters on both hands and was hospitalized for frostbite.,1
"An employee was responding to a gas release at the refinery when the gas ignited, causing the employee to sustain burns to the face.",1
An employee slipped and fell as she was about to throw trash away behind a store register. She suffered a back injury.,1
An employee was sitting on a 24-inch folding stool when they fell off the stool and the stool collapsed. The foldable legs of the stool amputated the employee's right index finger.,0
"An employee was responding to a code for aggressive behavior from a patient. Upon stepping out of the elevator, the patient attacked the employee and the employee sustained hand lacerations.",1
An employee was trying to retrieve a towel that was stuck in a machine when the machine lid fell on their head. The employee was hospitalized.,1
"An employee was using a screwdriver to pry a metal plate from a gate to the heated tortoise barn when the screwdriver broke and struck the employee in the right eye, resulting in an puncture wound.",1
"An employee was shopping with a client. While walking on a sidewalk, he slipped on ice and fell, suffering a broken fibula.",1
"An employee was putting boxes onto pallets when a forklift dropped additional pallets on top of the employee, resulting in fractures to both her legs and ankles.",1
"An employee was assisting another employee to unjam cardboard in a machine. The employee stood on top of the cardboard bale and tugged on the cardboard. Upon getting down, the employee slipped and fell, resulting in rib fractures on the left side.",1
An employee was using a pump to add product containing chorine dioxide to a water tower and chiller system. The employee was hospitalized for possible chorine dioxide inhalation exposure.,1
"Three employees were assessing an exhaust fan that had a noise problem. The unit was deenergized, and the belt was being manually spun, when one employee's glove was caught between the moving belt and the pulley. The belt amputated his right ring fingertip.",0
"An employee was using a band saw to cut pork chops when his finger became caught in the blade, resulting in a left index fingertip amputation.",0
"An employee was changing a coil on an inline fryer. The valve housing came out and struck the employee in the face, resulting in a face and left eye injury.",1
"An employee was working with a co-worker to start up an oven that was not lighting. Upon looking into the oven, the oven ignited and the employee sustained second-degree burns on his face.",1
"An employee was completing a delivery when they slipped and fell on the snow and ice on a customer's steps, resulting in a right femur fracture and hospitalization.",1
"At 1:06 p.m. on December 27, 2022, an employee was straightening a board in a pallet machine. A sprocket in the machine caught and partially amputated his right ring finger.",0
"An employee was operating a hydraulic log splitter to cut wood. His right hand became caught between the ram of the machine and the wood, resulting in a right ring finger and partial little finger amputation.",0
"An employee was working with a catwalk, changing out a cable. After removing the skate cable, the employee and a co-worker were adjusting the skate to install the new cable. The co-worker positioned himself on the driller side of the catwalk; the injured employee was on the off driller side. As the employee made his way down the catwalk, he placed his right hand on the index pin of the catwalk trough to gain leverage. As the skate's momentum carried it forward, it pinched the employee's right thumb against the pin. The tip of the thumb was amputated.",0
"An employee was removing a temporary window. His left thumb was caught, and partially amputated, between the 2-by-4 window jamb and a piece of metal.",0
"On December 27, 2022, an employee was sweeping the floor and moving boxes in the produce area when she slipped and fell, resulting in a fracture to her left kneecap.",1
"An employee was working during a cold weather event to break ice from water troughs for calves. The employee suffered frostbite in his fingers, resulting in surgical amputations to six fingers.",1
"An employee was standing behind a forklift, waiting to load a truck trailer, when another forklift backed into him. He suffered a broken pelvis.",1
"An employee was walking under a moving carcass line when he was struck by a carcass and knocked off the platform. He fell three feet, struck the conveyor support, and landed on the floor. The employee sustained a left hip fracture.",1
An employee was walking to her car when she tripped over a pallet. She suffered broken left and right ankles.,1
"An employee slipped while walking down a hill, fell, and suffered a broken left ankle.",1
"On December 27, 2022, an employee slipped on ice in a parking lot and fell, suffering a broken hip.",1
An employee exited her vehicle and walked toward the building when she slipped and fell on ice. She sustained a left leg fracture.,1
"An employee was opening a gate when they fell on an ice-covered concrete driveway. The employee began to bleed from the ear and was hospitalized, having suffered a skull fracture on the left side.",1
"An employee was on a truck equipped with an aerial lift assisting with the lowering of cable reels onto the truck bed using mechanical equipment. As a reel was being lowered, the employee placed one foot on the bucket access platform of the truck and the other foot on the steps leading to the platform for leverage. The employee bent down to shift the reel and as they stood up and placed their right foot on the platform, they fell from the truck onto the ground. They sustained fractures to the L1 and L2 vertebrae as well as to the pelvis.",1
"An employee was using a portable step ladder to repair ceiling tiles in a kitchen when he lost his balance and fell 3.5 feet off the ladder. The employee struck a metal table before landing on the floor, resulting in five rib fractures and a possible head injury.",1
"An employee was unloading a trailer when she fell off the trailer to the concrete ground, resulting in two rib fractures.",1
"An employee tripped on uneven asphalt in a parking lot, suffered an injury to the right hip, and was hospitalized.",1
An employee was unloading boxes from a van when he began to have chest pain. The employee was hospitalized.,1
"An employee was standing on a step stool, changing letters on a sign, when she lost her balance. She fell and suffered a concussion.",1
An employee was shocked and burned on the right hand while changing a light bulb/ballast. The employee was hospitalized.,1
"An employee was sitting on a wheeled stool. The employee leaned over and the stool rolled out from under him, causing him to fall backward onto the floor and hit his head. The employee suffered a concussion.",1
An employee was operating a manual pallet jack to move a stack of pallets when he felt a popping sensation in his abdomen.,1
"An employee was cutting lumber with a chop saw. As the employee was removing a piece of wood, the saw lacerated the employee's fingers. One finger was amputated.",0
An employee was using a table saw to cut plywood and amputated two fingers on the left hand. The machine was not guarded at the time.,1
"A sub-contractor employee was standing on a scaffold applying a finish when he fell approximately 6 feet to the ground. The employee sustained a back injury, and a broken left knee that required surgery.",1
"An employee was trying to open a heavy walk-in cooler door. Her hand slipped off the handle and she fell on her side, breaking her hip.",1
"An employee was cleaning a drum truck platform with a hose. The employee fell from a ladder attached to the truck to the ground about 8 feet below, breaking both heels.",1
"An employee was cleaning construction debris from a roof. He stepped on an unmarked piece of plywood that was covering a 2-foot-by-2-foot hole in the roof, fell through, and landed on the concrete floor about 14 feet below. He suffered a broken wrist and broken ribs.",1
"An employee was descending a 16-foot ladder to clear a jam on a conveyor. The employee slipped and fell to the floor, suffering injuries to the head, ankle, and wrist.",1
"An employee was repositioning a load of 60-pound steel rods when a bar rolled onto the employee's thumb. His thumb became caught between the decking and rods, resulting in an amputation of the right thumb below the nail.",1
"While preparing to fuel an aircraft, an employee slipped and fell on snow or ice. The employee sustained an injury to the left leg/knee.",1
"An employee was working in the precast area, replacing a cracked concrete lid. He stepped back, slipped/tripped, and fell to the ground, hitting his head on a concrete liner that was on the ground. The employee was hospitalized with a concussion and internal bleeding.",1
"An employee was moving a large argon gas tank from the outdoor gas storage building and fell backward, striking the left side of his head. The employee was hospitalized for a left parietal skull fracture and a subdural hematoma.",1
"An employee was ascending a ladder to open a latch on a grain bin. As they were climbing, the ladder collapsed, causing the employee to potentially strike the edge of a cement wall and land on the floor. The employee sustained nine rib fractures and a collapsed lung.",1
"An employee was walking on a vessel when they slipped on a wet hatch cover and fell to the ship's main deck. The employee sustained fractures to the skull, left eye socket, jaw, and tibia, as well as a dislocated left shoulder.",1
"An employee had been driving a bus route. When the employee was off the bus, a passenger assaulted her. The employee was on the ground when the passenger fell onto the employee's left ankle, resulting in a fracture.",1
"An employee was helping to remove a piece of a heating duct that was suspended approximately 20 feet in the air by threaded rods. A telehandler was holding up the duct as the crew began cutting the threaded rods one by one. When the last rod was cut, the duct shifted, knocking the employee off a scissor lift to the ground, resulting in rib and ankle fractures.",1
"An employee was spray painting the front of a frac tank. He was moving down the steps, spray painting the surfaces he had just been occupying, when he reached to spray a spot and lost his balance. He fell backward and the back of his head struck the concrete floor. He lost consciousness, suffered bleeding inside the skull, and was hospitalized.",1
"An employee was moving 6x6 wood debris while repairing a roof when the roof caved in and the employee fell 24 feet to the concrete floor below. The employee suffered bruised lungs, a scratch on his right lung, multiple spinal vertebrae fractures, and a fractured left iliac crest. Fall protection was not used at the time of incident.",1
"An employee had been sorting laundry, work that involved lifting bags weighing no more than 50 pounds. As he was sorting through a laundry bag, he lifted the bag, turned his head to the left, and felt pain in his chest.",1
"An employee was preparing to remove the lid from a transformer when they were struck by the pressurized lid, resulting in a laceration and bruising to the right side of the face as well as a right shoulder injury.",1
"An employee was on a step ladder on top of a vending machine, installing a light fixture. The employee fell from the ladder, landing on the floor and suffering a broken neck vertebra and a concussion.",1
An employee was walking up the stairs when they fell backward and caught their hand on a stair bracket. The employee landed on their back and sustained swelling in the right hand and eye as well as chest and back pain.,1
"An employee was driving a four-wheeler when the vehicle struck a ditch, causing the employee to fall from the machine. The employee sustained rib and lung injuries.",1
An employee was moving a steel beam when the scaffolding collapsed and the employee fell resulting in a broken leg and fractured ribs.,1
"An employee entered a building to refill his tar bucket from a kettle. The employee then exited the building and stepped into hot, previously laid tar. His foot became stuck, causing him to pull up to try and dislodge his foot. He lost balance and dropped the bucket of hot tar. The tar splattered and burned his neck and right hand. As he attempted to remove his gloves, his left hand was also burned. The tar was between 380-400 °F when taken from the kettle.",1
A liftgate was dropped on an employee's leg. The employee sustained a partial amputation and required hospitalization.,1
"An employee and co-worker were lifting a generator when it was dropped onto the employee's left hand, resulting in a partial amputation of a finger.",0
An employee was using a jib crane to load coils onto a machine. He was helping to guide the coils when one slid back and pinched his hand between the hook/handle and another coil. The employee sustained a crush injury to the right hand and was hospitalized for surgery.,1
"An employee was descending a ladder when their left foot slipped, and the employee fell to the ground, landing on their left side. The employee sustained fractures to the collar bone, left-side ribs, and left middle finger. The left ring finger was lacerated.",1
"On December 29, 2022, at 7:00 AM, an employee was called to perform maintenance on an edger. He locked out the two disconnects and went to put a serpentine belt back on when his clothing got caught between the pulley and belt on the drive motor as it was coasting down. His left hand and forearm were pulled into the belt and pulley, causing a middle finger fracture, little finger dislocation, degloving injury to the index finger, and a fractured forearm. He was hospitalized.",1
"Employee 1 was changing out the propane tank on his forklift while employee 2 was backing up his forklift. Due to heavy rain, there was condensation on the dock surface which caused employee 2's forklift to slide into employee 1, crushing him between the two forklifts. He sustained a pelvic fracture.",1
"A door closed on an employee's left middle finger, resulting in a fingertip amputation.",1
"An employee was walking into work when they slipped on ice and fell, resulting in a hip fracture.",1
"An employee was working inside of a network vault to repair a conductor. The conductor became energized and a metal wire came in contact with the conductor, causing an arc flash. The employee sustained second-degree burns to the face and head.",1
"On December 29, 2022, at approximately 8:40 AM, an employee completed a propane delivery. He brought the hose back to the truck and walked around the truck, where he slipped on slush. The employee fell and sustained a left hip fracture and contusion that resulted in hospitalization.",1
"An employee was hooking a fifth-wheel dolly to the connector on a 28-foot trailer to create a tandem set of 28-foot trailers. The dolly moved in a pothole or divot on the ground and the employee's left hand was crushed between the dolly hitch and the connector, resulting in a left hand fracture.",1
"An employee loaded a steel part onto a brake press to be formed. During the second bend of the material, a pinch point was created between the material and the tooling of the machine. The pinch point contacted the employee's index and middle fingertips, resulting in amputations below the nail and above the knuckle.",1
An employee was coming out of a vendor door when their left big toe was run over by a forklift. The employee was hospitalized and had surgery.,1
"At approximately 9:00 PM, on December 29, 2022, an employee was cleaning the front of the store when a robber entered the area behind the register and attempted to steal the register till. The employee was shot in the chest area.",1
"An employee had been driving a snowmobile. While stabilizing the vehicle in packed snow, it fell over onto the employee's leg, resulting in a tibia fracture.",1
"An employee was operating a pillow blower when it became jammed. Upon removing the fiber jam, the employee became caught in the picker and sustained multiple fractures to the right arm.",1
An employee was working in the office when fumes from a construction site entered the office. The employee was hospitalized for an asthma attack.,1
"On December 29, 2022, at approximately 11:43 AM, an employee was struck by a moving forklift outside of the production office. He sustained a crush injury to the right foot and was hospitalized.",1
"An employee was working on a shoring scaffold with another employee to strip plywood from cement. The employees threw a 4x4 piece of forming down and it got stuck on the beam of the scaffold. The injured employee went to grab the forming when their left ring fingertip was pinched between it and the beam, resulting in a partial amputation.",1
"An employee had been moving a tote using a pallet jack. An automatic guided vehicle (AGV) picked up a tote and was transporting it to another location when it struck the pallet jack, pushing the pallet jack into the employee who was then caught between the pallet jack and a column. The employee sustained a laceration and fracture of the left leg that required surgery.",1
An employee was using a drill with a ground rod attached to wind up a line to pull a flat mule line from transformer to transformer. His left little finger became wrapped in the line and was partially amputated.,1
"An employee was on a ladder accessing the top of a vessel. He was using a hand wrench to tighten an outlet piping flange. The wrench slipped off the flange, causing the employee to fall 8 feet to the ground and sustain 4 rib and 3 back fractures. Fall protection was not worn at the time.",1
"An employee was leaving their vehicle when they slipped on ice in the parking lot and fell, resulting in a leg fracture and ankle dislocation.",1
"An employee was clearing a jam of packaging material on a packaging machine. The crosscut blades inside the machine activated and contacted his left hand, causing partial amputations to his thumb and index finger.",1
"On December 30, 2022 at 7:30AM, an employee was putting protectors on his truck load when he fell off the trailer. The employee sustained skull fractures, a brain bleed, and three broken ribs.",1
"An employee was on a watercraft tying the boat to the dock cleat when her finger became caught in the rope. The boat moved, causing the rope to tighten. The employee sustained a left ring fingertip amputation.",1
"An employee was walking a dog when they stopped walking and the dog continued, causing them to slip on ice and sustain a head injury.",1
"An employee was walking outside to go on break when they slipped and fell on ice, resulting in a shoulder and elbow fracture.",1
An employee was driving a bobtail hostler truck into an underground cave entrance. The truck struck a stationary object inside the cave road system. The employee sustained fractures to a hip and both legs.,1
"An employee was assisting residents with eating when two residents got into a physical altercation. The employee intervened and was struck several times in the head. He sustained bleeding in the brain, requiring hospitalization and surgery.",1
An employee had just completed installing a door header when he backed into a nail gun that was held by another worker. The employee was struck with a framing nail near the shoulder.,1
"Employees were installing glass for skylights on a flat roof and were removing glass from a shipping crate. The glass shifted from its position and fell onto one of the employees, causing them to sustain a compound fracture of the right leg.",1
"An employee was constructing a retaining wall. He parked a backhoe facing the wall so that he could get mortar from the bucket of the backhoe. As the employee was removing mortar from the bucket, the backhoe rolled forward, pinning the employee against the retaining wall. He sustained a femur fracture.",1
An employee was walking out to their car when they slipped on ice/snow and fell to the ground striking their head. The employee experienced tingling in an arm and leg.,1
"An employee was changing out a customer's windshield. The employee was carrying the windshield into the shop from outside when he slipped on ice. The windshield cut the tip of his right middle finger, resulting in a fingertip amputation.",0
"An employee was putting trash into a makeshift wooden trash box that was suspended by chains approximately 12-15 feet above the ground. The employee stepped into the trash box when the box and chains gave way and the employee fell onto the concrete below, resulting in a laceration to their head.",1
"An employee got up from her desk and turned to walk down a hallway when she stumbled and fell to the ground, landing on her right side. The employee suffered a right hip fracture that required hospitalization.",1
"An employee was sanding a part in a horizontal machining lathe. The sandpaper got caught in the part that the employee was working on, pulling the employee's arm into the rotating part. The employee sustained a left forearm fracture.",1
"Employees were performing a tubing integrity test. As they were blowing down the pressure from the casing, the nipple assembly came off the casing valve flange onto the ground. The nipple threads and casing valve flange threads failed with the pressure, causing the employees to be pushed to the ground. The injured employee sustained a head injury and was hospitalized.",1
An employee was repairing a coffee machine when hot water discharged from the machine. The employee sustained facial burns and was hospitalized.,1
An employee was cleaning a pneumatic rotary cup filler and sustained an amputation to the left thumb tip.,0
"A temporary employee was throwing garbage into a container of a truck when the driver pulled away from the loading dock. The employee fell from the dock and sustained fractures to the face, right arm, right hand, and a right shoulder contusion.",1
"An employee was operating a pallet jack to change a forklift battery. Upon reversing, the employee's right leg became caught between the pallet jack and a scrubber, resulting in a right tibia fracture that required hospitalization and surgery.",1
"An employee was climbing a ladder that was leaned against a wall to access a piece of HVAC equipment. The ladder slid out from under him, and he rode the ladder approximately 6-8 feet to the ground. The employee sustained fractures of the humerus, radius, knee cap, thumb, and nose.",1
An employee was stocking shelves while sitting on a castor-wheel rolling chair. The employee fell out of the chair and sustained a left hip fracture.,1
"An employee was cleaning out a box truck. While getting out of the back of the truck, he missed the first step, causing him to fall from the truck to the ground. He sustained a left leg fracture that required surgery.",1
"An employee was measuring the produced water depth using a gauge line. After measuring, the employee began climbing down the storage tank ladder and fell. As he fell, his boots became caught between the ladder rungs, causing a right femur and left hip fracture.",1
An employee was walking to their vehicle after their shift when they slipped on ice on the sidewalk and sustained a fractured left tibia and fibula.,1
"An employee was unloading a motor from a flatbed trailer when his foot caught on a board on the trailer, causing him to fall. As he was falling, his right index finger got caught between the motor and its transport carrier, resulting in a fingertip amputation that required surgery.",0
An employee was performing maintenance on the ice auger of a machine located on the roof of a processing plant. His arm got caught in the ice auger and sustained a degloving injury. The employee was hospitalized.,1
An employee was walking to his car while on break when he was approached by two individuals that demanded the keys to the employee's vehicle. The employee was shot twice and was hospitalized.,1
"An employee was standing in front of the manager's office when two employees who were not working, entered the store. A physical altercation occurred and the employee sustained back pain and trouble breathing.",1
"An employee was repairing a flat tire. He was using a buffing tool when the stone attachment came apart, throwing debris into the employee's left eye resulting in the loss of the eye.",1
"An employee was clearing a line on the urea plant when the urea solution solidified, causing a blockage. The employee was splashed with hot water causing burns to the neck, torso, and legs.",1
"An employee was cutting meat with a band saw. While removing something from the saw, the machine amputated their finger.",0
An employee was putting a collar clamp on 8-inch drill collars in a mouse hole. His right index finger was caught between the collar clamp and a shop hammer (used to tighten collar clamp). The fingertip was amputated and required surgery.,0
An employee was using a rolling ladder cart to service shelves when they fell to the floor resulting in a fractured femur.,1
"An employee was on a ladder cleaning a cooler. While stepping down from the ladder, the employee fell to the ground and struck their head, sustaining a skull fracture.",1
"An employee was repositioning a part in a fixture and pinched his left index finger between the part and the fixture, resulting in a fingertip amputation without bone loss.",1
An employee had been loading a golf cart into a truck. The golf cart's door hit the employee's left hand and amputated the little finger.,0
An employee stepped out of a truck to retrieve some items from the cabin. When they stepped down the truck began to move and pinned the employee against a gate. The employee sustained injury to their lungs.,1
"An employee was using a ladder to climb down into an excavation to clear off snow when he fell 18-20 feet to the ground below, resulting in a broken right hip, fractured pelvis, and fractured vertebra.",1
"An employee was sorting donations outside at the drive-through window. The employee tripped on the cord of a glass lamp and fell. The glass broke and cut an artery in the employee's right elbow, requiring hospitalization.",1
An employee was pulling a material hand cart across a concrete surface when he slipped and fell to the concrete surface and also landed against a 2-way radio he was carrying on his right side. The employee sustained a fractured femur.,1
"An employee was in the sales area of a retail store near the park entrance. She was walking toward the sales counter when she fell and struck her head on the countertop. The employee sustained a hematoma and 2-inch laceration above her left eyebrow, as well as a broken left femur.",1
A crew was installing skid rails. The injured employee was checking the alignment of two sections of skid rails when the pieces moved and his right middle and ring fingers were caught in the pin hole connection of the two sections. Both fingertips were amputated.,1
"An employee was cleaning a stream line machine when the cutting pistons contacted his right ring and middle fingers, resulting in amputations of the top of the fingers.",1
"An employee was operating a brake press. As they stepped on the foot pedal, their left glove got caught in a part on the brake press and their middle finger was pulled forward and pinched between the part and the brake press, resulting in a fingertip amputation.",0
"An employee was walking across the showroom floor when he slipped and fell, injuring his knee.",1
"An employee was leaving the back area of the rig when he stepped between a flare line pipe and a skid. He slipped and fell, fracturing his right leg.",1
The injured employee had been assisting another employee and was struck by the forks of a forklift. The injured employee was hospitalized with a broken ankle.,1
"On January 2, 2023, an employee delivered milk to a customer and was preparing to leave the site. He was stowing away the delivery truck's liftgate when his right hand got caught between the liftgate and its back frame. The employee suffered fractures to his index and middle fingers, resulting in hospitalization and surgery.",1
An employee was unclogging a rotary drain valve on equipment when his right middle finger was partially amputated.,0
An employee tackled another football player and then went into cardiac arrest.,1
"An employee was inspecting a drip coming from a water line. The employee bumped his head on a compressed air storage tank and sustained a concussion, neck strain, and injured disks in the lower back. The employee was hospitalized.",1
"On January 2, 2023, an employee was sorting returned merchandise when she fell over a box, hit her left hip with a walkie-talkie she had clipped on her jeans, and fell to the floor, resulting in a fractured hip.",1
An employee was screwing on the cover for a hot water heater. The screw ricocheted and struck the employee's eye causing a corneal abrasion with a puncture.,1
"Two employees were delivering a fully loaded food cart to a hospital. While lowering the electric lift on the back of the delivery vehicle, the cart shifted and began to fall off the lift. The injured employee tried to stop the cart from falling but it fell on the employee resulting in a broken femur requiring hospitalization and surgery.",1
"While teaching a private skiing lesson, an employee fell on the ground and sustained a broken clavicle.",1
"An employee was speaking with clients while on a porch at their residence. The employee stepped back and fell off the porch, resulting in a fractured T2 vertebra.",1
"An employee was hosing down a conveyor belt during a product changeover when their left hand got caught between the conveyor belt and its guard, resulting in a ring fingertip amputation just below the nail.",1
"An employee was lifting a truss off a table roller. The truss was stuck on the roller, causing the employee's left index, middle, and ring fingers to be crushed. All three fingers were amputated at the first knuckle.",0
"An employee was packing bread into cabinets. As the employee was pushing two empty racks out of a cooler, they slipped and fell to the floor, resulting in a fractured hip.",1
"An employee loaded six TV stands onto a hand truck dolly, each one weighing approximately 38 kilograms. The employee pushed one side of the dolly while his co-worker pushed on the other side of the dolly. The employee lost his footing and fell. The dolly then fell on top of him and the handle pierced his right foot through the tongue of his shoe, resulting in a puncture wound.",1
"On January 3, 2023, at 5:00 PM, an employee who had been using a powered industrial truck (PIT) was found lying on the concrete floor with lacerations and a broken nose requiring hospitalization.",1
"A temporary employee was assisting with the reinstallation of an exhaust hood on a mill zinc pot. As he was preparing to install bolts on the framework for the exhaust hood, he stepped on insulation that was covering an opening on the pot, submerging his right leg up to his knee into molten zinc and resulting in burns to the leg.",1
An employee was operating a CNC machine. The employee was extracting used material when their left index finger was caught between two materials and amputated.,1
"An employee was driving a truck to service residential trash/recycling carts. The employee stopped the truck and walked in front of the vehicle onto the shoulder of the roadway, then slipped on ice and fell to the ground. The employee was hospitalized with a broken right femur.",1
"An employee was attempting to close a security door when their right index finger became caught between the door and the doorframe, resulting in partial amputation of the fingertip.",0
"An employee and a co-worker were moving sections of steel beams that were approximately 4 feet long. The co-worker attempted to shift one section of steel while the employee lifted the other side of the beam section. As the co-worker shifted the beam, the employee's left index finger was caught between two steel beam sections, resulting in a laceration and a fingertip amputation.",1
An employee was unblocking a load chute when they sustained an amputation just below the right middle fingernail.,0
"On January 3, 2023, at 8:45 p.m., an employee was delivering pizzas when they were ambushed by a robber and stabbed in the back with a knife. The employee was hospitalized.",1
An employee was picking up batteries for company trucks at an auto parts store when they slipped and fell to the concrete. The employee was hospitalized with a fractured kneecap.,1
A temporary phlebotomist began to experience back pain while drawing blood from various patients. The employee suffered a pinched nerve.,1
"An employee and his crew were performing drilling operations and just made a drill casing connection. While the drill operator was lowering the casing hammer and hose down to the casing, the employee was standing beside them guiding the hydraulic hoses with his left hand. When the operator lowered the casing hammer, the employee's right middle finger was contacted by the drill pin rod inside the casing rail, resulting in a compound fracture.",1
"An employee was walking from her office to an adjacent office when she slipped and fell, resulting in a fractured right hip.",1
"While descending an A-frame ladder, a temporary employee fell approximately 4 feet. The employee was hospitalized for a hip fracture.",1
An employee walked into the kitchen and slipped on flattened cardboard boxes that were on the floor. The employee fell on the floor and dislocated their right hip.,1
"On January 3, 2023, at 11:45 a.m., an employee was grinding welds on a tank with a 4.5-inch electric grinder disc when it kicked back and lacerated their right ring finger down to the bone, requiring hospitalization.",1
An employee was working on the attachment securing mechanism of a skid steer when their hand was caught by the mechanism. The employee was hospitalized with fractures and lacerations to three fingers on the left hand.,1
An employee's right foot was run over by the left side of a forklift.,1
"On January 3, 2023, a paramedic was removing an IV from a patient when the patient struck the employee, causing the employee to fall to the floor. The employee suffered a concussion and injuries to their elbow and knee.",1
Employees were using a winch line on a boom truck to lower a utility pole onto pole stands. An employee's hand was caught between the stand and the utility pole resulting in partial amputation of the left thumb.,1
"An employee was walking down the hall when she tripped and fell to the floor, resulting in a broken right hip.",1
An employee was bending aluminum sterilizer basket handles on a mechanical power press when their right index finger was caught in the point of operation and lacerated.,1
An employee was at a worksite carrying approximately 40 pounds of lifting chains when they fell to the ground. The employee was hospitalized for cracked ribs.,1
"An employee was replacing the valve stem on a pneumatic valve when the valve actuated and closed on their thumb, resulting in a fingertip amputation.",0
"An employee was walking when they were struck by a forklift in their lower right leg, resulting in a fracture that required surgery.",1
"An employee stepped off of concrete while leaving a facility when they slipped on ice and fell to the ground, resulting in a fractured right hip.",1
"An employee was walking to check product stock levels when a board that was used for stacking the material broke, causing the material to shift. A pinch point was created and the employee's legs were caught between a channel and a steel beam, resulting in a broken ankle.",1
An employee was operating a 6-foot sheet metal shear. The material he was cutting slipped over the backstop and his left hand then slid into the shear area. The employee sustained amputations to three fingertips on their left hand.,1
"On January 4, 2023, at 4:00 a.m., an employee was erecting bakers scaffolding in a stairwell in order to perform drywall finishing when he fell approximately 6 feet off the scaffold and suffered a broken arm.",1
An employee was processing catfish when his right middle finger was punctured. The employee was hospitalized.,1
"An employee was on the top of the ladder of a stock cart when it moved forward. She lost balance and fell to the ground, resulting in a right leg fracture.",1
"An employee was at her work station using a wrench to assemble parts. She pulled on the wrench to tighten it when it came loose, causing her to fall backward. The employee caught herself with her left hand and arm as she fell onto the concrete floor, resulting in a broken wrist.",1
"An employee was pulling a cart down the hallway of a store's produce area when the corner of a pallet caught her foot and she fell to the floor, landing on her right hip and suffering a broken hip.",1
"An employee was performing work on a railcar that was elevated two levels above the ground and backed up to a loading dock. He was getting off the railcar when he missed the plate and fell in between the railcar and the loading dock. The employee fell two levels before hitting the ground, resulting in a head laceration, pain in his arm, and blunt force trauma.",1
"An employee was exiting their workplace when they tripped on a sidewalk ledge and fell, resulting in an injury to their left shin that required surgery.",1
"An employee was removing a utility pole from service when the power lines contacted his hands, resulting in an electrical shock and burns.",1
"An employee was in a warehouse aisle fixing a damaged bulk bag weighing approximately 2,500 pounds. A stack of bulk bags from an adjacent aisle partially fell on top of him, resulting in a fractured rib and a dislocated right shoulder.",1
"An employee was installing bushing into a wellhead with the assistance of a forklift when his right hand was caught between the forklift mast and the bushing, resulting in a crushed hand with multiple finger amputations.",1
"An employee was using a box cutter to remove debris from the roller of a carpet rolling machine when the box cutter got tangled with the debris and pulled the employee's arm into the machine, resulting in a broken bone between the elbow and shoulder.",1
An employee went onto a sugar tanker truck to cut the seal and lost his balance. He then missed the first step of the ladder and fell. The employee was hospitalized.,1
"An employee was walking near a tree that was being cut. The tree bounced after falling and struck the employee's leg, resulting in a fractured shin.",1
"An employee finished parking a fleet truck and was walking back to the shipping office when they were struck by a forklift in the parking lot, resulting in multiple fractures.",1
"An employee was preparing to move a steel diaphragm weighing 959 pounds when three diaphragms fell onto his right leg, resulting in a fractured femur.",1
"An employee was removing an electric pallet jack from under a pallet when her left ring finger got caught between the handle of the pallet jack and a metal beam, resulting in a fingertip amputation.",0
"An employee climbed on top of stackable containers to retrieve product from the top container. As he pulled the product box out, he lost his grip and fell approximately 2-3 feet to the ground, resulting in an injury to his right forearm.",1
"An employee was walking in a hallway when they slipped on a wet floor and fell onto their right hip, resulting in a fractured hip.",1
An employee was participating in lifeboat emergency escape training. The lever to drop the lifeboat was actuated while the employee was seated on a solid bench inside the lifeboat. The lifeboat dropped onto the water below. The impact caused the employee to sustain fractured vertebrae and a lacerated liver.,1
"An employee was using a stand-up reach forklift to move product at a floor storage location when his hip became pinched between the forklift and a rack, resulting in a fractured pelvis.",1
"An employee was attempting to open a barrel of methyl methacrylate and suffered third degree burns to their face, hands, and hair.",1
"An employee was measuring the thickness of boards on a conveyor belt. As the employee reached for a board, their hand was pulled into the conveyor belt, resulting in a fractured index finger that required hospitalization and surgery, as well as bruises to additional fingers.",1
"An employee was on a ladder stocking merchandise in a warehouse when he lost his balance and fell to the floor, resulting in a head laceration and a broken thumb that required surgery.",1
"On January 5, 2023, an employee was operating a stand-up electric forklift to rearrange wooden pallets in a warehouse. The forklift struck a concrete pole and the employee's thumb was pinched between the pole and the forklift, resulting in a fractured thumb.",1
"An employee was attaching a horizontal stabilizer to an airplane and pinched his left index finger between the stabilizer point and the rear attachment point, resulting in a fingertip amputation.",1
"An employee was replacing a large steel wheel on a machine using a bottle jack. While lifting the wheel, the jack came down onto the employee's hand, resulting in crush injuries. The employee's left middle finger was medically amputated.",0
"An employee was using a chop saw to cut wood for a trailer when the saw blade lacerated their fingertip, resulting in an amputation.",0
"An employee was changing out valves when a piece broke loose. The employee's left little finger became pinched between the valve and piping, resulting in amputation.",0
"On January 5, 2023, an employee was wiping a printing press with a rag when his hand was pulled into the plate rollers, resulting in a partial fingertip amputation.",1
"An employee was matching redundant parts in a CNC lathe. A part came out of the chuck, hitting and breaking the guard door glass. The glass struck the employee in the left side of his face, rendering him unconscious and causing him to fall to the floor. The employee suffered skull, orbital, and nasal fractures.",1
An employee was troubleshooting and conducting maintenance on a wax injection molding die. An actuating part caught their left index finger and amputated the fingertip.,0
"An employee was changing out a pump in a waste water treatment plant. The pump was pressurized and when he disconnected the hose, it sprayed peracetic acid in the employee's face, resulting in chemical burns.",1
"An employee had been working at her computer. The employee got up to walk away, tripped over the power cord of a portable heater, and fell to the floor. She struck the floor with her knee and chest and sustained a kidney injury.",1
"An employee was preparing to climb an 8-foot scaffold ladder to install a 6-inch piping blind flange. As the employee climbed to the fourth rung of the ladder, he struck the top of his hardhat on an overhead pipe. The employee fell from the scaffold ladder approximately 4-5 feet before landing on his hip and striking his head on the ground. He sustained spine and neck injuries that required surgery.",1
"An employee was troubleshooting a problem on a wrapping machine when their finger was caught in the chain and sprocket, resulting in a fingertip amputation.",0
"An employee used a scissor lift to get to the trailer of a truck so he could unload the trailer. As he released the bar, heavy furniture pushed against it, and the bar knocked the employee off balance, causing him to fall from the trailer to the ground. The employee was hospitalized with a head injury, and fractures to the ankle and wrist.",1
"On January 5, 2023, an employee was operating a ketchup bottle labeling machine that used a roller system to pump glue onto the labels. Their left hand was crushed in the labeler machine, resulting in a ring finger amputation.",1
"An employee was picking up a piece of steel-cutting rule when he felt the rule snag his glove. When he moved his hand in the opposite direction to free it, the rule lacerated his finger deeper, resulting in a partial traumatic amputation.",0
"An employee was making adjustments to a finishing machine when the powered conveyor pushed his right hand into the rotating brush. The bristles on that brush pulled his right arm at an angle and pushed him against the machine, resulting in an abrasion on the arm.",1
"An employee was outside a hospital to assist in looking for a patient. After she spoke with a security guard, she turned to walk away and inadvertently stepped off a curb, twisting and landing on her left ankle. The employee suffered a fractured and dislocated ankle.",1
"On January 5, 2023, an employee was standing on a dock when they were struck by a forklift, resulting in fractures to both their legs and hips that required surgery.",1
"A subcontracted employee was carrying materials while working on the roof of a four-story building. The employee tripped and fell 45 feet to the ground below, resulting in a hip fracture.",1
"On January 5, 2023, an employee used a crane to move a steel beam onto a conveyor. After placing the beam, it fell off the conveyor and struck the employee's left foot. The employee was hospitalized and released the same day but later experienced complications with their foot, resulting in amputation to two toes.",0
"An employee was replacing a drive unit in a forklift. While lowering the jack to put the drive unit in place, the jack slid out from under the power unit of the forklift, causing the employee's hand to be crushed. Three of the employee's fingers were amputated.",1
"An employee was delivering a pallet of solar panels that was on top of a pallet jack on a lift gate. The pallet weighed more than 1,000 pounds. When the employee jumped off the truck, the pallet tipped over and fell on top of them, resulting in a leg fracture that required hospitalization.",1
"An employee was connecting a drill pipe to a stump using a drill string and top drive when the drill pipe contacted their left foot, resulting in amputations of their big and index toes as well as damage to the middle toe.",1
"An employee was painting fascia while on a ladder when he lost his balance and fell to the ground, resulting in a concussion and back injury that required hospitalization.",1
"An employee was drilling an inner mast guide roller and used his hand to balance himself. The guide roller contacted his hand and his finger became crushed between two rollers, resulting in a partial finger amputation.",0
An employee was exiting the separation area when they slipped on gravel and contacted barbed wire fencing. The employee sustained a puncture wound between the right thumb and index finger.,1
"An employee was hand-picking orders while standing near an order picker forklift. A co-worker was operating a turret forklift nearby when it struck the order picker forklift, which rolled over the employee's left foot. The employee suffered an injury to their big toe that required hospitalization and surgery.",1
"An employee was leaving a residential house after delivering mail when a dog began to charge at him. As the employee ran away, he fell to the ground, resulting in a dislocated knee and elbow.",1
"An employee was walking to a truck wash bay when the roll-up door started to close automatically. It fell to the floor as the employee was underneath it. The employee sustained broken ankles, a head laceration, and a back injury.",1
An employee was demolishing a brick wall when the wall fell on them. The employee was hospitalized with a broken foot.,1
"An employee was standing near a fixed cabinet while speaking with a co-worker when the cabinet fell off the wall and struck the employee's head and chest, resulting in blunt force injuries.",1
"An employee was walking up the steps to the front door of the office when they tripped on the front edge of a step. The employee fell onto the concrete floor landing on his right side, and sustained a fractured right hip.",1
"An employee was walking when a customer spilled grease on the floor from a rotisserie chicken and the employee slipped on the grease and fell, resulting in a broken right hip.",1
"An employee was walking to their car when they slipped and fell on a sidewalk that was slick with snow. The employee struck their head on the ground and lost consciousness, and sustained contusions on their right arm and shoulder.",1
"On January 6, 2023, an employee was installing lights when he contacted the flex whip and sustained an electrical shock that caused him to fall off the ladder. The employee was hospitalized for a second-degree burn to his left index finger.",1
"An employee was disconnecting a winch truck's load line from a load when the winch truck rolled forward, tightening the line. The employee's right hand was caught by the hook and chain of the load line and the index fingertip was amputated below the fingernail.",0
"On January 6, 2023, at approximately 2:45 PM, an employee was stepping off the riding step of a rear-load refuse truck and fell to the ground, sustaining a fractured left tibia.",1
"On January 6, 2023, at 3 p.m., an employee was using a fire hose to clean hot fly ash off an 8-foot-high wall of a damper when the fly ash fell off the wall and caused a splash that contacted the employee, resulting in a thermal burn to their abdomen and legs.",1
An employee was driving a stand-on pallet jack down an aisle and collided with a forklift being driven by a co-worker at an intersection. The employee suffered compound fractures to their foot.,1
"On January 6, 2023, at approximately 3:20 PM, an employee was walking across the parking lot when they tripped and fell. The employee sustained back injuries that required hospitalization and surgery.",1
"On 1/06/2023, an employee was on the fourth floor flat roof of an apartment building construction worksite. The employee was cleaning up nails and trash and putting them in a trash bag. The employee fell through a hole on the fourth floor and landed on the concrete floor of the first floor. The employee sustained a broken right ankle and required back surgery.",1
"An employee was positioning a sheet of steel to be fastened to a roof when they stepped on a 2x4 that broke, causing them to fall from the roof 20 feet to the ground below. The employee suffered a head injury and a broken femur.",1
An employee was cutting a box open when the blade caused a partial amputation to their left thumb.,0
"An employee fell down the stairs of the bus and landed on the concrete ground below, sustaining a fractured left hip.",1
Two employees were working in a trench when it collapsed. One employee was hospitalized.,1
An employee was walking down a platform near the blow box area when they fell into the zinc snout and landed in molten zinc. The employee sustained burns.,1
"An employee was working at the cashier station of a drive-through window. A customer drove into the drive-through but their driver-side car window wasn’t operational. The customer opened his car door and provided payment to the employee through the partially opened car door. After payment was made, the employee handed the customer his food through the open car door. The customer then turned to put the food on his passenger seat and closed his car door as the employee was reaching into the car door to hand the customer his receipt. The car door closed on the employee’s left ring finger, resulting in a fingertip amputation.",0
"An employee was operating an extrusion line press. The employee was backing off the line, and clearing material near the nozzle when they became caught in the machine resulting in partial amputation of the right middle finger.",0
Employees got into an argument due to workplace scheduling issues. The argument escalated into a fist-fight. An employee sustained facial lacerations and contusions.,1
"An employee was assisting with setting cones and safety equipment and nailing down fasteners on a flat second-story roof when they fell off the roof to the ground below, resulting in injuries to both hips that required hospitalization.",1
An employee was setting up lights on opposite ends of beams. Vibrations caused a beam to slip and crush the employee's left index finger against another beam. The employee sustained an open fracture to the finger.,1
"A crew was pinning two cross braces between substructure beams. As the outer cross brace was being pinned, the inner brace (6-inch square tubing, weighing 524 pounds) fell from the transport bracket, catching the employee's finger between the brace and the frame. The employee sustained a left index finger fracture.",1
"An employee was operating a gang saw when a 2 x 3 x 10 board fell on the employee's right hand, resulting in an amputation of the thumb at the knuckle.",1
An employee was building shelves. The employee was using a table saw to cut 2-by-4's into 1-inch pieces when the saw partially amputated their left thumb.,0
"On January 6, 2023, an employee was bending down to take pictures of a steel bin for a customer. A forklift hauling a double-stacked steel bin was entering the same aisle and caught the employee's right leg between the two steel material bins. The employee was hospitalized with a compound fracture of the right ankle.",1
"An employee accessed the platform of a saw machine to observe sensor issues. While attempting to fix the issue, the right sleeve of his shirt was caught by the gear switch that pulls the saw from left to right and his right hand was crushed. The employee was taken to the hospital and his right hand was medically amputated.",1
"An employee was removing a governor from an elevator system with the govern rope suspended from the sheave. A co-worker grabbed the suspended cable to move it out the way when it slipped through the cable grab and pinched employee's right middle finger between the cable and the sheave, resulting in an amputation at the distal interphalangeal joint.",1
"While working on floor molds, an employee moved and twisted his leg, resulting in a fracture to his lower right leg.",1
"An employee was spotting a crate that was being unloaded from a forklift when the crate fell off the forks of the forklift, causing him to fall backward and strike his head on the concrete floor. The employee suffered a head injury.",1
An employee was climbing a 12-foot extension ladder to fasten a manway. The employee fell 8-10 from the ladder and struck an object on the way down sustaining fractures to the ribs.,1
An employee was climbing down a power pole when the insulator failed and the employee sustained electrical shock and burns.,1
An employee was leaving to clock out when her foot got caught on a tote causing her to fall. The employee sustained injury to the left femur.,1
An employee was caught in a breading machine and sustained fractures to an arm and fingers.,1
An employee was preparing to cut a hole to add an electrical box to an existing panel. The tool contacted the live electrode in the breaker resulting in an arc flash. The employee sustained burns to both hands.,1
"An employee was carrying pans in the kitchen when she lost balance and fell to the floor, resulting in a wrist fracture.",1
"An employee was performing general sanitation practices on an inclined conveyor in the live chicken receiving area. The employee was removing some feathers that were stuck on the conveyor chain drive when his glove got caught in the chain drive, pulling his right hand into the drive chain and sprocket. The employee suffered an amputation of the right little fingertip and lacerations to the right middle and ring fingers.",1
"An employee slipped on the ice, resulting in a laceration to his head.",1
An employee was working at a site where a portable generator was being used to power humidifiers. The employee began to feel ill and was hospitalized for carbon monoxide poisoning.,1
"An employee was working at a table. When she went to walk away from the table, she tripped over screen material that was on the floor and fell. The employee sustained a fractured right hip.",1
An employee was on a pallet elevated by a forklift and was counting inventory in a freezer. The employee slipped and fell from the forklift and struck his head on the concrete floor 8 to 10 feet below. The employee sustained a knot on his head and a neck injury.,1
An employee had been standing on the catwalk of a cotton module feeder while modules were being unloaded from the module truck. The employee's feet were caught by a roller and both feet were amputated.,1
An employee was using a forklift to lower a block bin/dumpster to the ground when his left index fingertip was caught and amputated between the bin and the locking latch.,0
"While elevating themself in a power stocker lift to retrieve product, an employee's right little finger was crushed between the lift and the racking system. The finger was later amputated at the first knuckle.",0
An employee was standing on a tractor's fuel tank while assisting a co-worker in placing a trap. The employee stepped backward and fell to the ground landing on his back and sustaining a skull fracture.,1
"On January 8, 2023, at approximately 2:20 AM, an employee was accessing a drag conveyor when his right hand contacted the running conveyor. He sustained amputation of his right index and middle fingers.",0
"A law enforcement employee was participating in a scenario-based demonstration by a co-worker when the co-worker's firearm accidentally discharged. A 9-milimeter bullet struck the employee in the upper right thigh, resulting in a wound that required hospitalization.",1
A crane went to pick up a load and an employee's fingertip became caught and amputated.,0
"An employee was on a ladder replacing lights on an ATC tower. He slipped off a rung of the ladder and fell to the ground, sustaining broken ribs.",1
"An employee parked a vehicle at an angle. While trying to step off the vehicle using the fixed ladder, the employee fell approximately 12 feet to the ground and fractured a vertebra.",1
An employee was using a 10-inch chop saw to cut pieces of cardboard to length when her left hand contacted the saw blade resulting in a laceration to the index finger at the knuckle nearest the palm.,1
An employee was adjusting bags in a bagging machine when her left ring finger got caught in a belt and pulley. The employee suffered lacerations to her finger that resulted in a fingertip amputation to the distal joint.,0
An employee was power washing equipment at a customer site when their left little finger was struck and lacerated by the water stream.,1
"An employee was pushing a cart containing metal materials that were approximately 25 feet in length. A wheel on the cart detached causing the cart to tip over. The employee's right little finger was pinched by the cart, resulting in partial amputation of the fingertip.",0
"An employee was walking through the parking lot to their vehicle when they tripped and fell, resulting in injuries to the left knee and right elbow. They were hospitalized.",1
"An employee was closing a maintenance shop garage door when the springs in the door broke and the door closed on his right arm, resulting in a tear of his bicep.",1
An employee was helping place a bridge beam with a pulley and measuring for the correct fit. The employee was struck in the back by the pulley and sustained a fracture.,1
An employee was doing roofing work when the roof deck caved in. The employee fell through the roof surface to the ground and sustained a broken leg.,1
"On January 9, 2023, an employee was operating a forklift in the freezer area and pinned his leg between the forklift and a rack, resulting in a fractured leg.",1
"An employee was gathering scrap material and stocking it to the side of a line to reduce trip hazards. A piece of material caught the employee's glove, causing their left little finger to get caught by a large piece of steel being stacked. The employee suffered crush injuries that resulted in a fingertip amputation.",0
An employee was handing a box down to a co-worker when the box slipped and the employee fell backward off the ladder onto the ground. She sustained rib fractures.,1
"An employee parked their forklift and went to get something when the vehicle rolled back, pinning the employee between the forklift and a pallet. They sustained a leg fracture.",1
"An employee was attempting to open the lid on a oil car from a fixed ladder approximately 11-12 feet above the ground. The employee slipped and fell off the ladder to the ground below, resulting in a torn muscle in their right arm and an oblique fracture in their right leg.",1
"On January 9, 2023, an employee was using a knife to cut nylon straps while on top of wood bundles on a barge. The employee jumped off the wood bundles and the knife stabbed his right arm, resulting in a stab wound.",1
"An employee was unloading a package from a truck when the package fell on his foot, resulting in a fracture in the metatarsus area of the foot.",1
"An employee was loading a light tower onto a gooseneck trailer. When he pivoted the trailer jack up to lay the tongue of the light tower down, his finger became pinched between the light tower coupler and the wooden deck on the trailer. He sustained a left middle fingertip amputation.",0
"An employee was walking across the warehouse floor when her right foot was run over by a reversing forklift, resulting in fractures to the right leg/foot.",1
An employee was slacking off with the top drive and blocks so the elevators could be latched to a drill collar on the hydraulic catwalk. The employee went to grab the horns of the elevators to help maneuver them around the pipe. His left middle fingertip was crushed between the elevators and lift sub on the drill collar resulting in an amputation.,1
"An employee was backing up a stand-up forklift. The vehicle struck a guard and a wooden table. Upon exiting the forklift, the employee's left leg became caught between the table and dock guard, causing a fractured leg.",1
"An employee was assisting with maintenance on a machine when his glove was snagged and his fingers were pulled into the moving parts, resulting in crushed and broken fingers.",1
"An employee was removing debris and plywood from the catch plank on a bridge deck. The employee stepped on a piece of catch plank that was cracked and fell 21 feet to the ground below, resulting in a broken left arm and broken right shin.",1
"On January 9, 2023, at 9:30 p.m., an employee was repairing a robotic machine that had been dropping parts. After making initial repairs, the operator cycled the machine but the problem was still not corrected. The machine operator left the area and upon returning, the injured employee was found pinned by the robot between the grabbing arms and the area where the robot places the parts. The employee suffered a lacerated spleen, lacerated pancreas, a hole in the stomach, a hole in the aorta, and other injuries to the chest and abdomen.",1
"An employee was moving bags from the underside of a storm drain so that new bags could be installed. As he was moving the metal grate, the bar that he was lifting it with slipped, causing the grate to pinch his right index fingertip. The employee sustained a laceration.",1
"An employee was hand-setting a roof truss with fall protection when they lost their footing and fell approximately 10 feet to the ground, resulting in a pelvic fracture and internal bleeding. The employee was hospitalized.",1
An employee was exiting a residential home when they lost their footing and fell approximately 20 steps down the carpeted stairs. They sustained a left knee injury.,1
"On January 9, 2023, at approximately 12:00 PM, a mechanic was adjusting the tunnel machine's conveyor belt scraper. As the conveyor belt started, it caught the employee's hand, resulting in crushed fingers and hospitalization.",1
"On January 9, 2023, a crew was working on a rig at a well site. At approximately 12:30 PM, the rig block fell and struck an employee in the lower right leg, resulting in a leg fracture. The employee was hospitalized.",1
"An employee was cutting a failed carrier rope on a through air dryer (TAD) when his hand became caught in the ropes. As the employee went to free his hand, his other hand became caught and the ropes/machine continued to move. The employee sustained amputations of four fingers on his left hand and three fingers on his right hand.",1
An employee tripped and fell while walking from a nurse's station into a hallway. The employee suffered a broken left hip and was hospitalized.,1
"An employee was exiting a tractor trailer. As he descended the steps, he misstepped and fell to the ground, resulting in a left arm fracture.",1
"An employee was moving cheese from a line into a storage tote. The employee stepped backward into a divot in the concrete floor and twisted their foot, suffering a strained Achilles tendon.",1
An employee was drilling a hole when the drill bit broke and lacerated a bone in the employee's right hand.,1
"On January 10, 2023, at approximately 2:25 PM, an employee taking out the trash fell on the sidewalk and hit their head, resulting in a concussion.",1
An employee was standing on top of 4x4 posts that were laying across the top of two shipping containers. The wood broke causing the employee to fall to the parking lot and sustain a fracture to the back of the neck.,1
"An employee was on a step ladder retrieving a new automotive radiator from a stock room shelf. While descending the ladder, he missed the second step from the bottom and fell back. The employee struck his head and neck on the shelving behind him and was hospitalized.",1
"An employee was retrieving items out of the medication room when they slipped on the recently-mopped floor and fell, resulting in a left patella fracture.",1
An employee was working on a filament winding machine when his finger became stuck in the fiberglass. He sustained a right middle finger amputation at the first digit.,1
"An employee was walking out of a building after her shift when she tripped and fell, resulting in a knee cap fracture that required surgery.",1
"An employee was coming down a 12-foot extension ladder carrying a cordless drill. The employee fell off the ladder to the floor about 6 feet below and suffered injuries to the head, neck, and back, possibly including a skull fracture. The employee was hospitalized.",1
"On January 10, 2022, an employee was placing trash into a compactor when their left hand was caught on its lower ledge as its gate game down. The employee's left ring finger was crushed, resulting in an amputation.",0
An employee was pulling on a power supply to a light that was stuck in a stack of plywood. The stack fell over onto the employee and they sustained a compound fracture to the lower left leg.,1
"An employee was using a fire extinguisher to fight an incipient fire when they suffered smoke inhalation, triggering heart rhythm irregularities.",1
An employee was preparing food in the morning to open the restaurant when an assailant broke into the restaurant and assaulted the employee with a knife.,1
An employee was standing halfway up a 12-foot A-frame ladder to perform masonry work. The ladder and the employee fell sideways and the employee sustained lower leg fractures in two places.,1
"An employee was walking out of a room when they slipped and fell on the recently-mopped floor, resulting in a left elbow fracture.",1
"An employee was replacing the dust collection barrel of a dust collector. As the employee's right hand was near the machine's auger, the auger activated and contacted their index, middle, and ring fingers, resulting in amputations to the second knuckle.",0
"An employee was lifting an approximately 2' x 3'x 0.5"" steel plate to view the fibers underneath. The employee's right foot started to give way, causing them to fall to the ground. The steel plate landed on their right knee causing a fracture to the right femur.",1
An employee was cleaning debris out of the edge bander when their fingers were amputated.,0
"An employee was using a rod to install a telecommunications cable. As the employee pushed the duct rod inside the pipe, his hand struck against the metal junction box, resulting in a hand laceration.",1
"An employee was unloading a semi-trailer when they slipped and fell off, landing on the ground. The employee was hospitalized for a left collarbone fracture, left-side rib fractures, and a punctured lung.",1
An employee was on a scissor lift. While a metal beam was placed on the scissor lift it slipped off and struck the employee in the back of the head. They sustained a laceration that required stitches and hospitalization.,1
"An employee was stripping the floor with a concentrated disinfectant solution. As the employee was refilling the mop bucket, the solution splashed onto their right shoe, causing third degree burns to the employee's right foot.",1
"An employee was securing two pipes on a band saw. His right hand was placed between the pipes when the pressure switch was activated. The two pipes rolled together and the employee sustained an avulsion to right index finger, amputation of the right middle fingertip and distal finger fracture.",0
"An employee was on a extension ladder installing internet cable to a commercial customer's site. He fell approximately 15 feet off the ladder to the concrete below and sustained injuries to the right leg and knee, a laceration to the forehead, and a bruised right arm. The employee was hospitalized.",1
"On January 10, 2023, a crew was excavating a ditch to place pipes. An employee brought the road plate to the ditch and as he was lowering it, one side of the plate began to shift. The injured employee helped manually guide the plate. Then, the side opposite of where the injured employee was standing, began to move out of place. Upon going to move it, an excavator also went to move the plate with the bucket, pinning the employee between the excavator bucket and steel plate. The employee sustained neck fractures.",1
"An employee was operating a forklift to travel between buildings. As the lift was moving down the ramp, they reached out to press the open button for the overhead door. While pulling their arm back into the lift, the lift started to move down the ramp, catching their arm between a bollard and the forklift frame resulting in a left radius and ulna fracture.",1
"An employee was walking on the roof deck performing roofing work when the deck collapsed. The employee fell approximately 13 feet to the ground below, resulting in fractures and bruising to the hips, head, and chest.",1
An employee was walking through a parking deck to the office when he tripped on a curb and struck his face on a parked truck. The employee was hospitalized for internal injuries and bruising to the right side of the body.,1
A forklift ran over an employee's left foot as the employee was walking. The employee suffered a broken foot and toes and was hospitalized.,1
"Two forklifts collided in a warehouse. An employee operating one of the forklifts was pinned between the two forklifts and suffered an amputation to the left leg, below the knee.",1
An employee was cleaning machinery when they sustained lacerations on their hand from the machine blade.,1
"An employee had finished his shift in the leg debone X-ray area. As he was leaving the area, the employee slipped on the wet floor and fell. He sustained a proximal femur fracture.",1
"On January 11, 2023, at approximately 1:30 p.m., an employee and a non-employee were visually inspecting 70-foot-long wooden roof trusses from ground-level when the trusses collapsed and landed on both individuals. The employee sustained a fractured pelvis and broken ribs.",1
"Employees were operating a truck-mounted car baler to bale cars at a local wrecking yard. A car slid out of the grapple, falling approximately 8 feet and striking another car. That car then struck the injured employee. The employee sustained crushing injuries and fractures.",1
An employee was working from a ladder to service a heat treating vessel when they lost consciousness due a lack of oxygen and the nitrogen present. The employee fell from the ladder and sustained back contusions and a head laceration that required stitches.,1
"An employee was working in a tool trailer and lifting rigging equipment. A chain fell off a peg hook located above his head and he lost his balance and fell, resulting in a left femur fracture.",1
"An employee was in a meeting when she fainted and struck her head on the leg of a table. She was taken to the hospital, where she was diagnosed with a concussion. She also suffered a left knee abrasion.",1
"On January 11, 2023, an employee was unloading a tractor tire from a truck. The chain rigging slipped and the tire fell from the truck, striking the employee and pinning them to the ground. They sustained a leg/knee injury.",1
"An employee was preparing a garment to be pressed when the press activated and came down on her right  hand, resulting in burns.",1
"An employee was walking into a room when she slipped on the wet floor and fell, resulting in a left femur fracture.",1
"An employee was cleaning meat from a grinder when his finger was lacerated by the blade, resulting in a left middle finger amputation.",0
An employee was disconnecting 270-volt electrical wires to prepare for the demolition of a wall when the employee was shocked by the junction box.,1
"An employee was pumping a tank on a ship when they stepped backward through a manhole and fell 10-15 feet. The employee sustained a back hematoma, left ankle and hip fracture, and stitches on the left foot.",1
"An employee was operating a pruning lift. While moving it, she fell approximately four feet to the ground, fracturing her collarbone.",1
"On January 11, 2023, an employee was operating a saw machine. He stepped onto the cutting table and fell backward approximately 20 inches onto the floor. He struck his head and neck on the metal frame of the equipment and was hospitalized.",1
"An employee was rinsing a tanker. He opened the valve and his pants were sprayed with sodium hydroxide, resulting in chemical burns on his legs.",1
An employee was walking down the stairway near the soak tanks when they lost their footing and fell to the ground. They sustained a punctured lung and rib fractures.,1
An employee was closing a roof hatch when the handle on the hatch slipped off. The employee then lost his balance and fell to a cement stairwell deck below. He sustained a tailbone fracture.,1
"Employees were changing a hydraulic cylinder on the log turner of a head saw. One employee turned the saw on to advance the cylinder for installation. He noticed a crowbar on the takeaway belt, turned the saw off, and motioned for someone to move the crowbar. The injured employee retrieved the crowbar and contacted the blade which was slowing down, but not stopped. The employee sustained a laceration to the lower left arm and hand. His left index finger was medically amputated.",1
An employee was placing a patient in a therapeutic hold when the employee fell with the patient and sustained a right ankle dislocation.,1
An employee was removing the grinding wheels from the oven shelf when they became dizzy and disoriented. The employee was hospitalized.,1
"An employee was using a jib crane and rigging sling to move a piece of equipment. The sling pinched his left index finger, causing the amputation of the fingertip.",0
An employee was cutting meat using a bone saw. The employee went to shut off the saw when his hand slipped and his left middle and ring fingers were lacerated and amputated.,1
An employee was cleaning up the production building when they were struck by a forklift with a bucket attachment resulting in a lower left leg fracture. The employee was hospitalized.,1
An employee was mixing mortar with a portable cement mixer when he sustained an amputation of his left index and middle fingers and a fracture of the little finger. The employee was hospitalized.,1
"An employee was collecting trash on the curb when a vehicle drove onto the curb and struck the employee, resulting in skull fractures, a subdural hematoma, and a subarachnoid hemorrhage.",1
An employee was making an adjustment on an envelope machine when their left hand was caught in a rotating part. The employee sustained three finger amputations.,0
An employee was handing a bag to a forklift operator when the bag fell and both the forklift operator and the employee reached for it. The forward lever engaged and the employee sustained injuries to her left toes.,1
"An employee was on a step ladder inside of a freezer organizing product. She lost her footing on the second step and fell, striking her head on the floor. The employee sustained a fracture and a concussion.",1
An employee was walking back to her department when she fell forward while bending down to pick up a piece of paper. The employee was hospitalized.,1
A maintenance employee was cleaning a drain and was burned on the face by the cleaning chemicals.,1
"A crew was using a forklift to lower the frame of a tent structure. A bracing strap became caught in the mast of the forklift, causing the frame to twist and create tension. The employee went to remove the eye bolt at the apex when the tension on the forks released. The frame sprung back and struck the employee in the face and head, resulting in a laceration and contusion.",1
An employee was washing the windshield of his commercial truck when he slipped and fell while coming down the steps. The employee struck his head on the ground and sustained a skull fracture.,1
An employee sustained electrical burns resulting in hospitalization.,1
"An employee was operating a machine when his hand became caught between metal bars in the machine, resulting in a half-inch amputation of the left index finger.",0
"An employee was replacing a hydraulic cylinder on a scraper. The cylinder released pressure, causing it to fall and impact a wooden block. The wooden block split and the employee was struck by shrapnel from the wood, resulting in a right wrist dislocation.",1
"An employee was completing foundation work on a new build. As he was exiting the excavation using the form walls, the employee fell six feet and sustained a right ankle fracture that required surgery.",1
"An employee was draining hydraulic fluid from an excavator when his right middle finger was caught between the piston and the housing units, resulting in a fingertip amputation.",0
An employee was stacking a case of products on top of a pallet when he lost his balance and his finger got caught in the pinch point of the electric pallet jack. The employee sustained a partial right middle finger amputation.,0
Two employees were assembling a sort bend and raising the component with a chain fall (come-along) when the chain fall dropped and struck them. One employee was struck in the chest and hospitalized. The other sustained minor injuries.,1
An employee was performing maintenance on aviation equipment when they were struck by a falling push-back. The employee sustained a crushed shin on the right leg.,1
"An employee was removing items from the linen closet while propping the door open with his foot. His foot slipped and the door closed on his left ring finger, resulting in an amputation to the finger.",0
"An employee was purging a fuel system on a vibratory plow to repair the fuel system. The motor on the vibratory plow surged, causing the revolutions per minute to significantly increase. The employee went to manually shut off the fuel and his hand slipped and contacted the fan. His right little finger was amputated.",0
An employee was collecting shopping carts in the parking lot when they were struck by a car. She sustained a leg and skull fracture.,1
An employee was operating an upcut chop saw when three of his fingers were amputated at the first knuckle.,0
"An employee was setting up a spiral machine. The employee was feeding steel coils into the machine and using her hand to guide and stabilize the steel strip. The machine jogged and the feed louvers caught her glove, resulting in an amputation of the fingertip.",0
An employee was on a ladder hanging a gutter when the ladder slipped and the employee fell. They sustained a fractured right hip and a head laceration.,1
An employee was using a knife to cut bacon and amputated his fingertip.,0
"On January 12, 2023, an employee was moving a drill pipe when they were struck by the drill pipe. The employee sustained a crush injury that resulted in a left ring finger amputation.",1
An employee was standing on a sawhorse to hook a trailer wall to a crane. The employee fell to the ground and sustained a lower leg fracture that required surgery.,1
An employee was setting up a machine that seals packages. The machine started and their left ring finger was amputated.,0
"An employee was opening the cap on a water holding tank to check the water level. Pressure had built up in the tank, causing steam to come out of the opening when the cap was loosened. The employee sustained third-degree burns to the hands, forearms, and torso, as well as first-degree burns to the face.",1
An employee was helping to adjust the conveyor belt roller on a dirt tower screen. Their jacket became caught on the conveyor belt roller and they sustained a crushed forearm and right finger amputation.,0
"An employee was helping to guide a trailer that was being moved to the bay door by an overhead crane. The trailer was attached to the crane block with hitch safety chains. To pivot the trailer, the employee pulled the safety chains, causing them to unwind and remove the employee's left middle fingertip.",0
"An employee was talking to a forklift operator when the lift struck the employee, causing a heel fracture and right thigh injury.",1
An employee was helping to unload a heater treater from a forklift onto a trailer when the heater treater fell off the forklift and onto the employee's legs. They sustained leg fractures.,1
"An employee opened the elevator door on the first-floor landing when he slipped and fell into the pit, landing on top of the elevator pit spring. The employee sustained four rib fractures.",1
"An employee was installing a concrete stormwater pipe. The first piece was laid and the employee was guiding the second pipe into place and lost his footing. The employee's hand slipped out and he went to catch himself when his right index finger was caught between the two pipes coming together, resulting in amputation.",0
"An employee was working on a single-story residential roof when they fell to the ground, resulting in an injury to the left arm.",1
"On January 12, 2023, an employee was operating a lift while a co-worker was on the lift cutting bolts from a chloride heater. As the bolts were cut, hydrogen sulfide sprayed the lift operator in the face, resulting in burns.",1
"An employee was moving a wooden display shelf when it fell on top of them, resulting in a back injury.",1
"An employee was attempting to change out a die on a machine using a tool lifter with gusset attachments. The die slid and the employee's right ring finger was pinched between the die and the lifting device, resulting in amputation at the second knuckle.",0
The injured employee was assisting a patient to their feet when the patient lost balance and fell onto the injured employee's leg resulting in a fractured femur.,1
"An employee was helping move a six-foot, twenty-inch rolling table. One employee lost balance and the table fell over onto the injured employee, resulting in a right lower leg fracture.",1
A temporary employee was operating an insulation cutter. The employee went to clear a jam and amputated their right middle fingertip.,0
"An employee was diagnosing HVAC issues at a home when they fell approximately 15 feet through a sheetrock ceiling, landing on the ground floor of the home. The employee sustained a back injury.",1
"An office employee was entering her work cubicle when she tripped over the plastic floor mat under the office chair. The employee fell, which resulting in a fractured arm.",1
"An employee was working on the ground near the water tank while containment cables were being secured and stretched on the tank. One of the metal outriggers that was welded to the lower portion of the tank was equipped with anchor points for a perimeter cable to be attached. During the stretching of the cables, an anchor point gave way, releasing the tension on the cables. The cable struck the employee on the right thigh, fracturing his leg.",1
"An employee was climbing down from a roof on a ladder when they fell to the ground, resulting in fractures to both feet.",1
"On January 13, 2023, between 2:30 and 3:00 AM, a maintenance technician was working on a production line belt and pulley when he sustained a finger amputation.",1
"An employee was helping a forklift operator move a steel joist. The joist struck a forklift tire, and as the forklift started to move, the joist shifted and struck the employee's right leg, resulting in a fracture.",1
An employee was placing insulation into the openings around a conveyor that entered the building through an exterior wall. The conveyor was powered on while the employee was standing on it and the employee was caught between the conveyor and conveyor shroud resulting in a compression fracture of a lower vertebra.,1
An employee was taking items to her vehicle before leaving for the day when she fell to the floor and sustained a left shin fracture.,1
"An employee was operating a forklift. The vehicle backed into a stationary lift with a box clamp attachment and the clamp struck the employee's left ankle, resulting in lacerations and fractures.",1
An employee was putting merchandise away when they slipped on a blue bin rolling cart and fell. The employee was hospitalized for a left hip fracture.,1
An employee was preparing electronic parts for hand assembly when their right little finger was crushed by the machine die and amputated.,0
"On January 13, 2023, an employee was inspecting a dock leveler when the dock leveler collapsed, pinning the employee between it and a semi-trailer. The employee sustained injuries to the head, jaw, collarbone, ribs, and lungs. The employee was hospitalized.",1
"An employee was sitting in an office chair when she fell out of the chair and onto the floor. The employee struck her head, lost consciousness, and sustained a concussion. She also experienced left arm pain and was hospitalized.",1
"An employee was walking when they tripped and fell to the floor, sustaining a hip injury. They were hospitalized.",1
"An employee was using a torque gun on a bolt head. His left hand was on the flange when the arm rotated down, amputating his left index finger.",0
An employee was moving a home gym on the sales floor when the equipment folded in on itself. The employee sustained a left middle finger amputation.,0
"An employee was walking backward with a pallet jack when they contacted a metal pole. The arm of the pallet jack then struck the employee in the stomach, resulting in internal bleeding and hospitalization.",1
"On January 13, 2023, at approximately 8:16 a.m., an employee was operating an automated panel saw when their left middle and ring fingertips were pinched between the wood and the saw fence and amputated.",0
An employee was climbing down from the rear of a semi-truck trailer when his ring caught the top rail beam. His left ring finger was amputated.,0
"An employee was preparing a heavy metal column for painting. As the employee manually adjusted the column on the setter, it slipped off and landed on her right foot, resulting in a crush injury.",1
"An employee was entering a trailer when a pallet of compacted cardboard boxes tipped off a topper and fell onto the employee's left leg, resulting in a crush injury to the lower left leg/ankle.",1
"An employee was lifting pipe into a fuse machine when the strap failed, causing the pipe to fall and crush the employee's right leg. Their right leg was amputated above the knee.",1
An employee boarded a forklift to move fiber when the vehicle caught fire. The employee was burned.,1
"An employee was assisting with pulling a payloader from the snow with a tractor. He was adjusting the chain connecting the tractor to the payloader. When the tractor pulled forward, the employee's right ring fingertip was amputated.",0
An employee was helping move a shipping crate down the staircase with co-workers and a hand truck. The crate slid forward and came out of the strapping on the hand truck. The employee was struck in the head by the object and experienced bleeding.,1
"An employee was walking beside a dump truck, flagging traffic. The truck backed up and ran him over. He suffered two broken ankles, a broken left thumb, a broken rib, and a punctured lung and was hospitalized.",1
"On January 13, 2023, an employee was setting a brake on a railcar and turned to take a step back on the platform. The employee missed the platform and fell 3-4 feet to the gravel surface. They sustained lumbar vertebrae and rib fractures.",1
An employee was assisting a coworker to put gaylords on the second level of a racking system. The injured employee climbed a ladder to access the second level when the metal grate he was standing on buckled. The employee fell to the floor and sustained a left ankle fracture and dislocation.,1
"A temporary employee was using a grinder to grind down stone on a wall when the wheel fell off and struck his face shield. The employee's left little finger was then pinched between the wall and the grinder, resulting in an amputation.",1
"An employee was banding steel tubes when a bundle of steel fell on their leg, resulting in an open fracture to their left ankle.",1
"On January, 13, 2023, at 11:54 AM, an employee was putting plastic into a recycling bin next to the cardboard baler. He took a step backward and tripped on a pallet that was placed in front of the baler. The employee sustained a left femur fracture that required surgery.",1
An employee was walking around the bus conducting a pre-trip inspection when they slipped on a patch of ice in the parking lot. They sustained a right tibia and back fracture.,1
An employee was stacking lumber on the steel guides when the employee's right little finger was crushed between a 4 x 6 piece of lumber and a steel guide. He sustained an amputation of the finger below the fingernail.,0
"An employee was getting up from her chair at the customer service desk. She took a couple of steps then tripped. She fell to the floor and struck a trash can, resulting in fractures of the left shoulder, left arm, and both knees. The employee was hospitalized and had shoulder surgery.",1
"An employee was emptying out a cargo van full of cleaning equipment. He climbed up a six-foot A-frame ladder to put some personal belongings up in the loft area of a garage. He fell off the ladder onto the concrete floor and struck his head, resulting in an eardrum rupture, head trauma, and rib fractures.",1
An employee was working on the belts of a circulating pump when his fingers were pulled in by the belt. He sustained a right index finger amputation at the second knuckle.,0
An employee sustained a left little finger amputation.,0
"An employee was opening trailer doors when the cardboard bales inside of the trailer caused the door to spring open. The employee was knocked over and the cardboard bales fell out onto him, resulting in a right leg fracture.",1
An employee was helping to restrain a patient in the emergency department when they tripped over a stretcher and sustained a hip and knee fracture.,1
"On January 14, 2023, an employee was using a pipe wrench to free up a tube during a back-off procedure. The pipe wrench swung and struck the employee in the head, causing a contusion.",1
"An employee was operating a forklift in the warehouse freezer. As he was traveling down an aisle, the forklift struck a storage rack. The employee's leg was pinned between the racks and the forklift, resulting in a lower leg fracture and hospitalization.",1
An employee was setting an anchor on a roof and lost his balance. He fell approximately 20 feet and sustained an arm fracture.,1
An employee was caulking a window when they fell 12 feet from a ladder and sustained a broken left foot.,1
An employee sustained a burn to the left side of the body from boiling water.,1
"An employee parked their car and was walking into a restaurant when their right hand got stuck in an elevator door, resulting in partial amputations of four fingers.",1
"An employee was walking in an office area to retrieve a bottle of water when he tripped and struck his face on the corner of a table, resulting in a laceration from his nose through his top lip.",1
"A shelf fell on an employee's foot, amputating five of his toes.",0
"While helping to prevent a jam, an employee's arm became caught in a rolling machine, resulting in a broken arm.",1
"An employee was backing up a vehicle into a space in the garage when his foot became stuck on the accelerator, causing the vehicle to drive forward, through a ticketing booth, and strike another employee. The employee that was struck sustained a left femur fracture, a pelvic fracture, and internal bleeding.",1
"An employee was clearing material from a lawn mower when his right hand contacted the blade, resulting in an injury to the index and middle finger.",1
"An employee was assisting with a scrap metal drop-off at a scrapyard. While unloading, the employee fell onto his left knee in the bed of a pickup truck and rolled his leg. The employee sustained a left knee ligament tear.",1
An employee was searching for a piece of equipment outside when they slipped on ice and fell to the ground. The employee was hospitalized with an ankle fracture.,1
An employee was using an air wand to blow dust out for cleaning when their hand was placed on the rotating drum causing an amputation.,1
An employee was hoisting an elevator when it tipped over and crushed the employee's legs.,1
"An employee was cleaning a carrot machine when they sustained amputation of the left index, middle, and ring fingers.",0
"An employee was moving freight around in a delivery truck when they fell from the lift gate onto the ground, resulting in a pelvic fracture.",1
"An employee was hooking up a dolly to a trailer. While positioning the dolly, his hand slipped, pinching the inside of his thumb between the trailer and the dolly. He sustained a partial amputation to the left thumb.",0
"An employee was using a ladder on the main level of a shed roof to access a higher second-level area to install siding. The employee fell to the ground and struck his head, causing him to lose consciousness. He was hospitalized for a head injury.",1
"An employee was taking a cow from one pen to another when their finger was crushed between the gate and the cow, resulting in a fingertip amputation.",0
An employee was standing on an anti-fatigue mat retrieving items from a conveyor when she tripped over the edge of the mat and fell. She sustained a hip fracture.,1
An employee was walking to the back of the building when he stumbled and fell. The employee sustained a compound fracture of the left arm and required stitches on the left middle finger.,1
"An employee was rotating a lifted bonnet when their finger was pinched between the fork and valve, resulting in a right middle fingertip amputation.",0
"An employee was disembarking from a company van when she lost her footing and fell onto the curb, resulting in a left distal femur fracture. She was hospitalized for surgery.",1
"On January 16, 2023, an employee was removing tow chains from between two vehicles. One of the vehicles moved and crushed the employee's fingers between the chain and the vehicle, resulting in a partial amputation of the right index finger.",0
An employee was operating a brake press when he sustained amputations of fingers on the left hand.,1
An employee was moving a keg from the pick location to a pallet when the keg fell and crushed the tip of his right middle finger.,1
An employee was operating a powered circular saw to cut wood for cabinets when he sustained left middle and ring fingertip amputations.,0
An employee was helping to clear a clog of compacted dust in the silo and rotary valve on the dust collection system when they sustained an amputation of the right thumb above the first joint.,0
"On January 16, 2023, at approximately 10:33 AM, an employee was walking through the swinging door separating the seafood and meat departments and tripped on a folded step stool leaning against the wall and fell. The fall resulted in injury to the employee's hip that required surgery.",1
"An employee was shoveling behind a house when a skid-steer backed around the corner from the side yard. The employee's shovel became caught on the skid-steer tracks and bent downward, catching his leg. The employee sustained a fractured tibia and fibula.",1
An employee was operating a roll grooving machine when their left index finger was caught and crushed in the machine's rollers.,1
An employee was pulling and lifting a package when they felt a sharp pain in their back. The employee was hospitalized for a slipped lumbar disc.,1
"An employee was moving a relief valve that was on a pallet to prepare it for shipment. As the employee manually rotated the valve, it pinned his left ring finger against another valve that was adjacent to the valve that rotated. The employee sustained a left ring finger amputation.",0
"An employee was unloading a trailer that contained empty hand trucks (dollies) for transporting chicks. The dollies are moved within the trailer using a cabling/winch system. The injured employee and a co-worker were attempting to loosen a cable on a winch in order to remove a hook from one of the dollies. The injured employee's finger was then pinched between the hook and the hand truck, resulting in a left middle fingertip amputation.",0
"An employee was transferring sulfuric acid via a hose to a temporary holding tote when acid splashed onto his chest, torso, and arms, resulting in burns.",1
"An employee was making a delivery and stocking shelves when he tripped over a part on the floor and fell. He sustained injuries to the head, right hip, left leg, and right arm.",1
An employee was working on a vertical lathe when they were injured and hospitalized.,1
"An employee was delivering mail to a commercial location. A customer's vehicle was moving in reverse and struck the employee, knocking them to the ground. The employee sustained right shoulder, knee, and hip injuries.",1
"An employee reported to work at 2:00 p.m. and conducted a pre-shift inspection on a stand-up powered industrial vehicle (PIV). The employee was standing on the PIV with their hands over their head when they fell 10 inches from the forklift platform onto the concrete floor, resulting in injuries to their back and to the back of their head.",1
"An employee was on the third or fourth rung of a 10-foot ladder removing a 277-volt LED lighting fixture from the ceiling. The employee was shocked, causing him to fall off the ladder onto the floor. He sustained facial fractures.",1
"An employee was cleaning up an area after working. He reached down to grab a rag that had dropped in front of a fan blade on a radiator. The employee's left index finger was struck by a fan blade, resulting in an amputation.",0
"An employee was operating a powered industrial truck. As the vehicle approached an employee who was wrapping a pallet, the vehicle struck a parked forklift. The injured employee's leg became caught between the two vehicles, resulting in a left leg fracture and laceration.",1
"An employee was on a forklift picker while being trained by a co-worker on picking orders. As the employee leaned backward, the driver raised the forklift mast. When the picker went up, it caught her right arm, resulting in a laceration on the forearm that required hospitalization.",1
"In a warehouse, an employee was removing packaging material so a customer could access the mortar bags they purchased. The customer's truck was driving in reverse and struck the employee, pinning him against two stacked pallets of mortar. The employee sustained pelvis and hip fractures.",1
"An employee was pulling a truck from a loading dock but could not get enough traction under the tires due to ice. After pulling the truck forward approximately 2 feet, the employee exited the vehicle to retrieve ice melt located in the rear of the trailer. The employee then dropped the bag of ice melt to the ground behind the trailer and was standing at ground level between the trailer and the loading dock. The airbag in the rear tag axle of the trailer engaged, lifting the rear axle up off the ground. The truck rolled backward, pinning him against the building. The employee was hospitalized with multiple pelvic fractures and a crushing injury to the abdomen and lower back, which required multiple surgeries.",1
An employee was cutting concrete in a chemical containment. The employee returned to work the next day with complaints of shortness of breath and coughing due to silica exposure.,1
"On January, 17 2023, an employee was setting up for spray painting. The employee filled the unit with paint and went to put the air cap on. While doing so, the trigger on the paint gun actuated, causing paint to be injected into the employee's right ring finger. The employee was hospitalized.",1
An employee was working at a station on a bun-making line. He was clearing dough from under a magnetized conveyor when the conveyor pulled in his left hand and broke it.,1
"An employee was preparing to help a patient on a stretcher get from a helicopter to an emergency room. The employee walked up a ramp to a helipad when he slipped and fell backward, landing on his back and striking his head on the helipad. He then tumbled off the helipad and contacted the safety fence surrounding the helipad. The employee suffered a compression fracture of his L2 vertebra.",1
An employee was pulling a piece of plastic brick that had become stuck on a pallet. The employee fell backward and suffered a broken hip and broken right finger.,1
An employee was walking through the parking lot to go into work when she slipped on ice and fell. The employee sustained a subdural hematoma and was hospitalized.,1
"An employee was troubleshooting a slitter machine. As the employee was adjusting the timing belt, the machine moved back into the home position, causing the employee's thumb to contact the timing belt's pinch point. The employee sustained a left thumb tip amputation and fracture.",0
"An employee was on an assembly line cutting meat off bones. While trying to prevent a piece of meat from sliding off the belt, the employee was cut on the right buttock by their knife.",1
"An employee was waiting for a trailer to back up in order to load scrap tires from a container. The employee was then pinned between the container and the trailer, resulting in injuries. The employee was hospitalized.",1
An employee was showing his firearm when it went off. Another employee was shot in the hip.,1
"While delivering mail, an employee slipped on ice and fell. The employee was hospitalized with a broken right elbow.",1
An employee was walking through the shop and walked into a piece of machinery. The employee sustained a kidney bruise.,1
"An employee was taping the tail ends of a roll of paper when their left hand became caught between the top roll of the winder and the roll of paper. The employee's left arm was pulled into the winder machine and sustained a laceration to the hand that required stitches, bruising of the arm, and a muscular injury. The employee was hospitalized.",1
"An employee was moving raw materials to production when their right foot became stuck between a walk-behind forklift and a motorized pallet jack, resulting in a right foot fracture.",1
"An employee was standing near the fryer when their phone fell in. Upon retrieving it, the employee sustained burns to the hands and fingers from the hot oil.",1
"On January 17, 2023, an employee was investigating a staircase that did not fit properly. He descended down the staircase that was temporarily installed and it fell approximately 8 feet. He landed on his feet and sustained a foot fracture and compression fracture of a vertebra.",1
"An employee was performing stripping operations and was stripping the plywood frame off a beam using a crowbar and a hammer. The 21-foot aluminum beam fell onto him, hitting his hard hat and causing an injury to the left side of his neck. He was hospitalized.",1
"On January 17, 2023, an employee was using an overhead crane to assemble a skid steer. As the crane was lifting the skid steer cab into place over the chassis, the cab dislodged from the crane and pinned the employee between the skid steer cab and the skid steer chassis. The employee sustained a crushing injury to the right arm.",1
"An employee was changing a mechanical part in a pneumatically operated air flow fixture machine. The flow switch engaged, causing a die to come into contact with his left index finger, resulting in a fingertip amputation.",0
An employee was lifting a T-post driver when his right thumb got caught between the T-post and chain causing a laceration to the thumb.,1
"On January 17, 2023, an employee was operating a vehicle lift when the lift jammed. While unjamming it, the lift released and amputated the employee's right index fingertip.",0
An employee was walking over to assist a customer with access to a fitting room when she fell and sustained a right leg fracture.,1
"An employee was carrying a piece of metal while wearing 36-inch stilts when they slipped on a framing screw and fell, fracturing their kneecap.",1
"On January 18, 2023, an employee was investigating a boiler feed water leak. The leak was stopped and the employee began completing housekeeping tasks in the area. He stepped in a puddle of boiler feed water, submerging his lower leg to the top of his rubber boot, resulting in second-degree burns of the lower leg and foot. The employee was hospitalized.",1
"An employee was walking when they tripped over a wheelchair, resulting in a dislocated shoulder while attempting to break their fall.",1
"On January 18, 2023, at approximately 1:30 AM, an employee was cleaning the loin conveyor machine when they sustained lacerations to the left hand and arm. The machine was guarded at the time.",1
An employee was cleaning rollers when their glove became caught and pulled into the rollers. They sustained damaged fingers and a partial amputation of the little finger.,0
"An employee stood up and turned to reach for their walker. Their left knee gave out and he then fell to the floor, sustaining a left knee fracture.",1
An employee slipped on a wet floor and fell. The employee was hospitalized with a knee injury.,1
An employee was helping a customer load product into his truck when he lost his balance and fell off the loading dock. The employee sustained a head injury.,1
"An employee was struck by a forklift mast on top of his hard hat, knocking him down into the man basket. He struck the man basket with his face and head, sustaining a mandible fracture and a chin laceration.",1
An employee was walking in the warehouse with a driver jack. Another pallet jack operator came into the area and backed into the injured employee. The pallet jack that the injured employee was walking with ran over his right foot and he sustained a toe and ankle fracture that required hospitalization and surgery.,1
An employee was putting air in a tire when the tire blew off the machine it was on. The employee was struck by the tire and sustained a right forearm fracture and injuries to the right eye and ear.,1
An employee was butchering a cow when the cow's reflexes activated and caused the employee to lacerate their forearm with their knife.,1
"An employee was walking through the building and stepping through the process area when they fell, resulting in a left knee injury.",1
An employee was helping lift a metal sheet. The sheet crushed the employee's fingers and amputated the tip of the employee's left index finger.,0
"An employee was cutting material on a table saw. The material jammed on the saw; when the employee tried to unjam it, the sawblade amputated the tip of his left thumb.",1
An employee was changing the belt wrapper on a cold-mill and lining up the cylinder head pin hole with the cart. His finger was pinched between the pad eye and the ram cylinder pin hole and sustained a fingertip amputation.,0
"An employee was operating a milling machine to fabricate parts. Swarf accumulated on the cutting surface. As the employee cleared the metal shavings, the rotating blade on the machine caught their left ring finger, resulting in a soft tissue fingertip amputation.",0
"An employee was lifting a calendar roll onto a wagon when the mounting bolts came apart on a nearby monorail crane, causing a 168-pound electrical cabinet to fall 20 feet from the crane. The employee was struck by the cabinet and sustained a spinal cord fracture.",1
An employee was changing a drum of compound when their finger became caught between the drum cover and the drum with the pump still attached. The employee sustained an amputation to the right ring finger.,1
"An employee was climbing out of a cement truck cab with a cooler. He lost his grip and fell to the ground, breaking his pelvis on the right side.",1
"An employee was working on the roof of a building, securing a section of the roof to be removed. The employee fell through the roof onto the concrete floor below and sustained a tailbone fracture, spleen rupture, and bruised lungs.",1
"An employee was carrying out a wheel seal and brake shoe/drum replacement on a vehicle's rear driver-side axle. The shop air gun was hooked to an air line and was lying on the floor next to him. As he was reaching for the air gun, the air line detached from the fitting. Pressurized air lacerated his right thumb and caused an embolism. He was hospitalized.",1
"On January 18, 2023, an employee was operating a pallet jack to move boxes when his hand slipped off the pallet jack and struck a box. The employee sustained a hand injury.",1
"An employee was working to clear a clog on a paper machine after a sheet break. His hand became caught in a nip point, resulting in amputations of fingers on both hands.",1
An employee was cutting a piece of wood panel with a circular saw. The saw became stuck on the wood and kicked back. The employee sustained an amputation of the left index fingertip and a laceration on the left middle finger.,0
"An employee retrieved information from a visitor's vehicle. As they were walking back to the door of the guard house, they tripped on a nearby curb and fell. The employee sustained sprains, bruising, swelling, and abrasions to the face, back, ribs, stomach, hips, legs, knees, and feet.",1
An employee was cleaning an office after moving to this new location. The employee stood on a chair to reach an area to clean when she fell to the floor and sustained a right leg injury.,1
"An employee was walking in a client's home when they opened the basement door and fell down 12 stairs. The employee sustained contusions to both knees, feet, and ankles, as well as to the right forearm and head.",1
"An employee was taking covers off totes in the yogurt room when their finger was pinched on the hinge assembly, resulting in amputation of the left little finger.",0
An employee was using a table saw for cedar woodworking and amputated two fingers.,0
"At 8:30 a.m. on January 18, 2023, an Infrastructure Repair Services employee was placing racks on a rack truck when one rack (the last to be placed on the truck) struck the rear of the truck. He lost his grip on the rack and it fell into position, pinching the fingers on his right hand against the truck's bed. His middle and ring fingertips were amputated.",0
An employee was helping masons take scaffolding down when their left little finger was crushed between scaffolding frames. The employee was hospitalized due to infection.,1
A forklift operator fell off the forklift and the forklift ran over his leg. The employee was hospitalized with head and neck injuries.,1
"An employee was working in the slag department, standing next to the belt of a hopper that leads to the mixer. His right leg became caught in the belt, resulting in a right leg amputation from the knee down.",0
Employees were replacing old stones on the upper level of a building. The upper portion of the building collapsed and struck two employees working from a lift. One employee was hospitalized.,1
An employee was skiing across a snow-covered patch of rocks when they fell forward and fractured their right elbow in multiple places and sustained a puncture wound to the right knee.,1
"Three employees were using an air motor or ""rattle"" to remove cement and break up a blockage from the inside of a drill pipe joint. As the injured employee was maneuvering the tool in the drill pipe, it struck a pocket of air buildup between the tool and the blockage, causing the tool to be forced out of the drill pipe and strike the employee in the left rib cage. The employee was hospitalized for fractured and bruised ribs.",1
An employee was on the bed of a rollback truck when she lost her balance and fell to the ground approximately 7 feet below. The employee sustained a left shin fracture.,1
An employee was working as the ground man while a loader was sorting landfill trash. A tooth on the loader's bucket struck his right quadriceps. He suffered a laceration to the thigh and his right leg was medically amputated.,1
An employee fell outside a front entryway and suffered a broken back.,1
"An employee was working in the nail department when they tripped and fell, resulting in hospitalization.",1
The employee was clearing out a concrete chute when his fingertip was amputated by the fins within the concrete mixing barrel.,1
"An employee was climbing an extension ladder to reach a roof. The employee fell from the ladder to the concrete about 24 feet below, suffering a dislocated shoulder.",1
An employee was using a miter saw to cut lead ballast bricks when he sustained an amputation to the upper left index finger.,0
"On January 18, 2023, an employee was putting together a shelving unit. They went to sit down in a chair and the chair moved, causing the employee to fall to the floor. The employee was hospitalized with a fractured wrist and ankle.",1
"An employee was replacing a plate of glass in a broken window. As he was pulling the broken glass out, a large shard fell down his left arm to his left foot. It lacerated his arm and the toe next to his big toe. He was hospitalized and required surgery.",1
Employees were replacing a check valve at the hydrogen pad. An employee was using wrenches to undo a fitting on a stainless steel line that carries hydrogen gas when hydrogen gas released and something caused a flash fire. The employee sustained second-and third-degree burns to their forearms.,1
"An employee was walking into work when they tripped over uneven cement in the parking lot, and fell resulting in a hip fracture.",1
"An employee was on the garage roof checking for an active leak. When climbing down the ladder, it shifted, causing the employee to fall approximately 12-13 feet to the paved driveway below. The employee sustained head trauma.",1
"An employee was walking between buildings through connecting corridors when she slipped on water and fell, resulting in a right patella fracture.",1
"An employee was putting logs on the deck from his front-end loader when he noticed a problem. The employee went to clear the clean-out chute in the sawmill debarker area when the machine was activated. His right thumb became caught in the drive chain, resulting in an amputation to the tip.",0
An employee was descending a 5-foot ladder after changing an engine on an aircraft. The employee fell from the ladder and struck their head and shoulder on the concrete.,1
"An employee approached a stack of girders, one of which had fallen. While his back was turned to the stack, another girder fell onto his right leg, which caused his face to hit the girder already on the ground. He suffered a broken right leg, a damaged right eye, and a laceration to the nose.",1
"An employee was unclogging a drain line from the tertiary screen in the recycle mill operations section. While lifting the basket out to clean, hot water sprayed through the seams of the filter. The employee sustained thermal burns on the left hand, forearm, and leg as well as the right thigh and foot.",1
"A temporary employee was disconnecting and moving a caustic cleaning hose after completing a tank wash cycle. Residual caustic solution splashed onto the employee's chest, face, and eyes.",1
"An employee was setting up to install a street light. As the employee placed the light pole on the ground, it became energized, causing the employee to sustain electrical burns to the left foot and hand, right hand, and right big toe.",1
"An employee was gathering tools while landscaping near a creek. The employee jumped over the creek and landed awkwardly, fracturing their ankle. The employee was hospitalized and received surgery.",1
"An employee was placing a new sawblade onto a band saw. As the employee was assisting to spin the band wheel so the safe edge could be removed, their left middle finger was pinched between the sawblade and band wheel, resulting in amputation of the fingertip.",1
"On January 19, 2023, an employee was closing a bay door when the door malfunctioned and struck the employee in the head, resulting in a laceration.",1
"The employee was opening the machine shop for the day and turned on the lights when an individual attacked them using an aluminum bar. The employee was knocked unconscious and sustained an eye socket fracture, a collarbone fracture, and a head laceration.",1
"An employee was working in the bakery department when they slipped and struck their head on the floor, resulting in head trauma.",1
"An employee had been trimming timber and moving the trimmings. After lunch, the employee began to feel ill and suffered a heart attack.",1
"On January 19, 2023, at 8:00 AM, an employee was walking from the main building to the laundromat when he slipped and fell on the ice. The employee sustained rib fractures.",1
"An employee was removing lumber from a drying kiln using a forklift. He dismounted his forklift to attach a cable to a cart holding a load of lumber. A second employee shifted the load, which pinned the injured employee between the load of lumber and his forklift. He sustained fractures to the right arm, scapula, ribs, and face.",1
An employee fell while climbing down from the cabin of the truck and struck his head on the floor of the mechanic shop. He was hospitalized.,1
"An employee was operating a robotic palletizer machine when they noticed a bag of corn leaking product. The employee turned off the machine and removed the broken bag from the pallet. The machine was then activated, causing the employee to get struck by and pinned to the pallet. The employee sustained fractures of the vertebrae and ribs that required hospitalization.",1
"An employee was delivering a load of concrete to a customer with a truck. The employee walked around to the admix tank on the truck to add the concrete accelerator to the load of concrete when the PVC tank end cap blew off and struck the employee, resulting in blunt force trauma to the neck and torso.",1
"An employee was participating in a training activity to utilize a two-finger actuated jog trigger to advance the seamer machine. The machine jogged with the employee's hand near it, resulting in a crush injury to the right little finger.",1
A temporary employee was mopping a floor using bleach and subsequently had an asthma attack. The employee was hospitalized.,1
"An employee was walking to exit the recreation room when he tripped over a set of dumbbells and fell, fracturing his hip.",1
An employee was assisting with a rigging operation when their fingers became pinched between the load and support cable. The employee sustained an amputation of the top of their little finger and abrasions to the other fingers.,1
"An employee was lifting the arm of a tire machine to remove a tire. The arm had become stuck between the rim and the tire. When the arm released, it struck the employee in the face due to the existing hydraulic pressure.",1
An employee was unbanding a stack of boxes using a utility knife and lacerated his left forearm.,1
An employee was removing protective wraps from a power line when an arc flash occurred. The employee sustained burns on the right side of their face and lower back.,1
"An employee was delivering a copy machine when he slipped on ice, causing his head to strike the delivery vehicle and then the ground. The employee was hospitalized with bleeding around the brain.",1
"On January 19, 2023, an employee was making adjustments to the support bar of the glass sanding machine when their left foot became pinched between the top and bottom conveyor belts of the machine. The employee was hospitalized.",1
"An employee was showing a loose bolt on the grill brush motor housing to a manager when the brush turned on and pinched his finger, resulting in amputation of the fingertip.",1
"An employee was leaving the manager's office when she slipped on a strip of plastic and fell on her right knee, resulting in a leg fracture. She was hospitalized and had surgery.",1
"An employee was disconnecting a trailer to the jack when the trailer jack stand disengaged and the tongue fell onto the employee's right foot and ankle, resulting in a fracture.",1
"On January 20, 2023, an employee was attempting to clear a jam when his glove was caught and his hand was pulled into the machine, resulting in a partial amputation of the little finger.",0
"Three employees were placing a plate into position for welding. The injured employee grabbed the plate to help move it into the proper position and a co-worker then adjusted the plate for it to drop down into location. The injured employee went to lift the plate again and placed her left middle finger into a plug hole to gain leverage. The plate dropped onto her fingertip, and her fingertip was lacerated. The employee's left middle finger was also amputated at the nail.",0
"At 2:15 p.m. on January 20, 2023, an employee was working on a faulty press and pushed down on the top of the press to assist it. The press returned to the start position while the employee's hand was still on top; a rod attached to the head of the press caught the employee's left middle finger and amputated it.",0
"On January 20, 2023, an employee delivered a drum to a customer's location, put it on a drum stand, and began adjusting it by sliding it a few inches on the stand. As the drum slid, it pinched the employee's left ring finger against the drum stand frame, causing the fingertip to be amputated.",0
"An employee was assembling and installing a boat lift. As he was aligning bolt holes in two of the lift's metal pieces, the pieces shifted, caught his fingertip, and amputated it.",0
"An employee was transporting a child when they tripped over another child and fell to the ground, sustaining a knee fracture and torn ligaments.",1
An employee was installing a breaker when it exploded and burned the employee's head and neck.,1
"An employee was unloading a pickup truck when carts with curtain wall materials fell off the truck and struck the employee. They sustained fractures to the right knee, left shin, and right wrist.",1
"An employee was packaging tortillas in boxes when she noticed a tortilla stuck underneath the bagger conveyor. As she went to grab it, her right ring finger became caught between the chain and sprocket, resulting in a finger amputation.",1
"An employee was taking an empty box to the back of the facility to dispose of it when she stepped on a bun tray, slid on the floor, and fell. The employee sustained a hip injury.",1
"An employee was delivering mail when they were assaulted by an unknown person. They sustained fractures to the nose, right wrist, left-side ribs, as well as contusions and abrasions to the face and brain hemorrhaging.",1
"An employee was walking a service dog when they slipped and fell, resulting in a right shoulder injury.",1
"An employee's finger was caught in a guide roll unwinder, causing an amputation to the finger. The employee was hospitalized.",1
"An employee was using a metal stake and hammer to strike the channels of a baler to allow room for wiring to go through while in operation. Their glove and tool became caught by the baler. The baler moved down and pressed on the metal tool, pinching the employee's left little and ring fingers. The little finger required medical amputation.",0
"An employee was taking a sugar sample to the lab. As he was walking down the stairs, he slipped on the second to last stair and fell backward. The employee's ankle was wedged into the stairs, resulting in a fracture of the left distal fibula at the lateral malleolus.",1
"An employee was using a pipe wrench on a 4-inch plug valve when the wrench slipped off the valve stem and pinched their left ring finger, resulting in a crush injury and amputation.",0
An employee was climbing a ladder when it slid out. The employee fell and suffered a broken femur.,1
"An employee was installing insulation on a roof when they fell 14 feet from the roof to the concrete, resulting in injuries to the head.",1
An employee was operating a meat slicing machine and amputated their right thumb tip.,0
"A maintenance mechanic was working on a valve on a clean-in-place system in the syrup room when hot water released, causing the employee to sustain first and second-degree burns to the right side of back, arm, and legs.",1
An employee was working in the deli area when they tripped over a cord and fell. The employee sustained a left hip fracture and was hospitalized.,1
An employee was operating a punch press when their fingers were caught in a die. Their left index finger was crushed and their left middle finger was amputated.,0
"An employee fell while descending a ladder, landing on the ground about 18 feet below. The employee sustained two broken legs and an injured kneecap.",1
"An employee was operating a roll mill when they dropped their knife. While retrieving it, the roller caught the employee's glove and pulled their left hand through the roller, resulting in amputation of the left little and ring fingers.",1
"An employee and a co-worker were feeding a cable through framed metal studs. After the task was complete, the employee walked over to his co-worker and his foot became caught on the cable, causing him to lose his balance and fall. The employee sustained a forearm laceration from a framed metal stud.",1
An employee was utilizing a table saw to cut a piece of pipe when they sustained a laceration to the right hand.,1
"An employee was stocking inventory when they tripped over a pallet and fell on the floor, resulting in a left shoulder fracture.",1
An employee was unclogging product in a ribbon blender and amputated their left index and middle fingers. The machine was not locked out or tagged out at the time.,1
"An employee was preparing to load product onto a trailer and was arranging stacks of milk. The hydraulic arm of the dolly loader came forward, pinning his right ankle. The employee sustained a right ankle fracture.",1
An employee was moving a horse from a pen to the arena to clean stalls. The horse made a sudden and unexpected movement and stepped on the employee's ankle. They sustained an ankle fracture and dislocation.,1
"An employee was positioning freight that was not on a pallet. The employee was pulling on the banding when the banding broke, causing the employee to fall to the ground and sustain a tibia fracture.",1
"And employee tripped on a cracked tile in a laundry room and fell, suffering a broken hip.",1
"An employee was walking from a trailer to a building. He slipped on an icy, snow-covered sidewalk and fell backward, hitting his head on the ground and suffering a fractured neck.",1
"An employee was unloading material from a tractor trailer into a warehouse. After finishing unloading, they proceeded to disengage the trailer lock and noticed that the load bar was not stored properly in the trailer. The employee walked into the trailer to store the load bar and the trailer started to pull away from the bay. The employee lost balance and fell between the dock and the trailer approximately 4-5 feet onto the pavement. The employee sustained a hip injury.",1
"An employee was getting ready to hook a trailer up to the work vehicle when he slipped and fell on ice, resulting in a broken hip. The employee was hospitalized and had surgery.",1
"An employee was troubleshooting cable television services at a residential home. While ascending the extension ladder, the ladder slid, causing the employee to fall. They sustained four vertebrae fractures as well as bruises to the head, shoulder, and legs.",1
An employee was retrieving an empty box from a lower shelf while bracing themselves on a rolling cart. The employee lost balance and fell to the ground and sustained a left hip fracture.,1
An employee was cleaning a rotary valve when their left middle fingertip was amputated.,0
An employee was informed of a suspected shoplifter in the store and went to confront the suspect. A physical altercation began and the employee sustained a fracture to his right lower leg.,1
"On January 22, 2023, at 4:12 PM, an employee was unloading pallets from a trailer when a leaking bottle of detergent caused the employee to slip and fall. The employee sustained multiple fractures to their right wrist and hand that required hospitalization and surgery.",1
The employee was working with a plastic lid press machine used for installing lids on cooler products. The employee was clearing a stuck plastic lid and their hand was caught in a pinch point resulting in a partial amputation to a finger.,1
An employee was standing on the water tower while conducting hot water release tasks. The hot water line on the truck detached due to excessive pressure and hot water sprayed onto the employee's legs and feet causing second-degree burns.,1
An employee's face struck the handle on a machine resulting in chipped teeth and a laceration inside the mouth.,1
"An employee was preparing to move a plate weighing 200-300 pounds to put on an O-Ring. While turning over the plate, it started to slip and fell out of the employee's grasp. Their right middle fingertip was caught and amputated between the plate and the workbench.",0
An employee was troubleshooting a malfunctioning pan-stacker machine in the bakery when their right hand was pinched between the lift mechanism and conveyor. The employee sustained lacerations and a right hand fracture that required hospitalization.,1
An employee was sweeping out a truck trailer when they slipped and fell while coming down from the top of the trailer. The employee sustained fractures to the T12 vertebra and ribs.,1
"A temporary employee was spotting a forklift that was loading cable reels (weighing 5,000-7,000 pounds) onto a trailer. The employee tried to position a chock under a secondary reel while their hand was under the primary reel being staged, and the primary reel rolled over their left hand and damaged an artery. The employee was hospitalized.",1
"An employee tripped over cylinder tubing while organizing a parts storage shed, causing him to fall and sustain an injury to his left ankle.",1
"An employee was using a hoist to lift large containers (420 pounds) of steel parts to be dipped into tanks. The employee set a container down on a support and his finger was caught between the container and the support, resulting in amputation just behind the first knuckle.",0
"On January 23, 2023, an employee was setting up a press roller for applying glue to boards when her right ring finger became pinched between the frame and the movable non-motorized outfeed platform. The finger was amputated just below the top knuckle.",0
"An employee has just finished delivering a package to a residential address when they slipped on snow or ice and fell to the ground, resulting in a distal femur fracture and a spiral fracture above the left knee.",1
"An employee was walking across a parking lot when they were struck by a company vehicle. The employee fell and hit their head on the pavement, resulting in head trauma and lacerations.",1
"An employee tripped while pouring grease into a grease trap. Grease splashed onto her arms and face, burning them.",1
"An employee was turning a pipe with a pipe wrench when the wrench slipped, pinching the employee's left index finger between the wrench and pipe resulting in amputation at the first joint.",0
"An employee was assisting another employee to weld and place a flange onto the body assembly. After aligning the flange for placement, the employee went to pull it into place when their right index finger became caught between the flange and the flange web, resulting in a fingertip amputation.",1
"An employee slipped on a patch of ice in the parking lot and fell to the ground, landing on his hip. The employee was hospitalized with a broken left hip.",1
"An employee was adjusting the width of a forklift attachment when a fork fell off and struck him in the foot. The employee sustained fractures to two left toes, lacerations, and inflammation.",1
"An employee was preparing to repair a leaking hydraulic hose on a catwalk. The catwalk trough was raised so that the employee could insert maintenance stops that go underneath the trough on both sides. After the employee inserted the maintenance stops, the employee lowered the trough. The trough continued to come down, causing the maintenance stop to come out and strike the employee in the abdomen, resulting in a contusion.",1
An employee was clearing snow off of their car when they fell to the ground and sustained back and left hip pain.,1
"An employee was operating a horizontal press. As the employee reached for their work badge, the press cycled onto their little finger and amputated a quarter-inch of the tip.",0
"An employee was pulling boards from a live deck when their gloved finger was caught in a chain roller and pulled past a guard, resulting in amputation of the left index fingertip.",0
An employee was conducting inspection activities when they were struck by a fork truck and sustained fractures to both ankles.,1
"At 6:30 p.m., an employee was placing expired and damaged cartons of milk onto a rolling container from a backroom cooler. The employee was pushing the container out to a truck when it began to lean sideways. As the employee attempted to catch the container and push it back up, her legs slipped and she fell, resulting in a torn ligament in her right leg that required hospitalization.",1
"A temporary employee was using a 4-inch pneumatic grinder when the grinding wheel broke apart and struck the employee's left thumb, resulting in an amputation.",0
"An employee slipped on ice on a sidewalk and fell, sustaining a broken ankle.",1
"An employee was rigging a windmill blade bearing in order to remove old grease fittings. One side of the blade bearing was lifted off the ground to facilitate access. The swivel-eye bolt failed and the bearing fell, striking the employee's foot.",1
An employee was reaching into a bag when an embroidery trimmer inside it lacerated her right middle finger.,1
"An employee was observing a de-icing task when they slipped on ice and fell, fracturing his left ankle.",1
An employee was walking and stepped on loose plywood on the decking. They fell approximately 10 feet to ground and sustained multiple fractures to the left leg that required surgery and hospitalization.,1
"On January 23, 2023, an employee was performing maintenance on a generator in the generator room. As the employee was leaving the area, gas emitting from the generator was ignited by a diesel powered heater. The employee suffered first- and second-degree burns to the back, face, and hands. The valves were not locked out or tagged out at the time.",1
An employee was kneeling around a drain in a parking garage to perform cleaning tasks. A forklift operator was moving a pallet of concrete blocks. The forklift struck and pinned the injured employee between the ground and the pallet. He sustained an arm fracture and pain in the back and ribs.,1
"An employee was standing on a 12-foot extension ladder patching drywall. The ladder slipped and the employee fell, resulting in a right leg fracture.",1
"An employee was walking in a back stock room. She lost her balance and fell to the floor, landing on her right hip and breaking it.",1
"An employee was walking into a classroom when he tripped on a rug, striking his head on a desk. The employee sustained sprains to their cervical spine and left knee, a strain to the lower back, and a concussion.",1
An employee was measuring a piece of pipe on a metal cutting machine. The machine amputated the employee's left ring finger at the first knuckle.,1
An employee was lifting empty dunnage when they strained their neck.,1
"An employee was operating the hydraulic shear to cut off a piece of metal. The foot pedal was activated, causing the clamp to come down onto the employee's left index finger. They sustained an amputation to the left index fingertip. The machine was guarded at the time.",1
An employee was moving a lettuce bin when it crushed his right ring finger. The finger was partially amputated.,0
An employee slipped while descending the stairs on a jet bridge. The employee landed on the ground and suffered a knee injury.,1
"An employee was stepping out of a company car and slipped and fell to the street, resulting in fractures to both ankles.",1
"An employee was logging an entry for product weight when she noticed a small crack in one of the jars of sauce. The employee was disposing of the jar when it broke, spilling hot tomato sauce into the top of her left boot. The employee sustained second-and third-degree burns to the left ankle and foot.",1
"An employee was trapped under collapsed steel I-beams, which crushed both the employee's legs and one arm. The employee was hospitalized.",1
An employee was loading steel coils onto a ground storage rack using an overhead crane with a handheld remote. The employee placed his left hand on a coil when it drifted and pinched his middle finger between another coil. The employee suffered a skin avulsion that resulted in a partial amputation.,0
"An employee was working on a camper. While climbing up scaffolding, the employee fell approximately 5 feet to the concrete floor below, resulting in fractures to the face, wrist, leg, and a toe.",1
"A temporary employee was wrapping a chain around a 2,000-pound block of metal, located on the ground. The block tipped over and crushed his right foot. He was hospitalized, requiring surgery.",1
"An employee was helping move low-profile barriers on a roadway. The employee was trying to snug a nut on the lower bolt of a barrier when the barrier was moved. The employee's little finger was caught between the side of the barrier and the nut, resulting in amputation and hospitalization.",1
"An employee was above a ceiling, walking on the rafters in the attic to bolt the sign to an exterior wall. He fell between the rafters, through the drop tile, and onto the concrete floor, suffering a separated pelvis.",1
"After reassembly work on a ready-mix truck, an employee turned the truck on to check for leaks. The employee was standing on the truck platform, about 3 feet off the ground, when he heard an air leak. As he was turning off the truck, a flying bolt from the plate assembly struck his forehead and broke his skull. He was hospitalized.",1
"An employee was standing outside when they slipped and fell in the parking lot, resulting in a hip dislocation.",1
An employee was unclogging a recycle pump when the seals on the pump blew. Steam was released and caused burns across his body.,1
"An employee was loading ceramic plates into a tray carrier as the plate advance mechanism was returning to the home position. The employee went to prevent the stack of plates from tipping over when his right glove was pulled into the housing around the plate advance mechanism, causing an amputation of the right middle and ring fingertips as well as a finger fracture.

OSHA: more information?--machine?",0
"An employee was operating a die cutter, producing parts in pad form. The employee was removing a pad when the cutter amputated the tips of their left index finger and thumb.",0
An employee was processing a part on a stationary reamer. The reamer bit caught the employee's glove and pulled in the employee's right middle and ring fingers. The machine amputated both fingers.,1
"An employee was operating a single head band saw. They went to clear dust off the machine and contacted the blade while it was still in motion, resulting in partial amputation of the right index finger.",1
An employee was standing on a railing to turn off the power to the automatic entry doors when the doors struck the employee and knocked them to the ground. The employee sustained a fractured hip.,1
"An employee was closing a semi-trailer door when their finger was pinched between two door panels, resulting in a partial amputation.",0
An employee was using a rag and solvent to clean a chrome roller when their right hand was pulled into a nip point created by the drive roller and the chrome roller resulting in contusions and swelling.,1
"At 7:10 a.m. on January 24, 2023, an employee had just cleared a jam on an empty pallet conveyor and was walking back to the palletizer when he noticed that one of the chains conveying the empty pallets was not aligned on its track. The machine was paused; he picked up the chain about 8 inches from the sprocket with his left hand. The conveyor then continued its cycle and his left-hand fingers were pulled into the chain and sprocket. He suffered three broken fingers and an amputation to the little fingertip.",1
An employee was stepping off a delivery vehicle when they fell to the street and sustained a back injury.,1
An employee fell out of a room after her feet became tangled in a telephone cord. She suffered a broken left femur.,1
"An employee was working on an overhead sprinkler pipe. He fell from a ladder to the floor 8 feet below, suffering a broken wrist and a closed head injury.",1
"An employee was installing the center steel on an oilfield drilling rig. The employee was untying the metal grate while kneeling within it; the metal grate fell on the employee's left-hand fingers and crushed them. The employee was hospitalized, requiring surgery.",1
"An employee was moving around a palletized bundle of cardboard boxes when he struck his leg against the stack of boxes. This caused him to lose his balance and fall forward to the ground, striking his nose on the cement floor. The employee sustained a nose fracture.",1
An employee was walking from their work station when he stepped on a wooden board and rolled his ankle. He sustained a pelvic injury that required surgery.,1
"An employee was operating a forklift to remove a pipe from the lower section of a pipe rack. Once the employee had the pipe on the forks, the employee parked the forklift and walked to the load to center it. Another pipe then shifted off the forks and fell, pinning the employee between the pipe and an ingot up ender behind him. The employee sustained a tibia and fibula fracture.",1
An employee was installing a ridge cap when they fell off a roof and sustained several broken bones. The employee was hospitalized.,1
"An employee was performing training tasks on the bead unit. A bead wire began to wrap around the drum so the trainer cut the wire and reclosed the interlocked gate. The injured employee/trainee then went to clear the wire that was hanging from the drum and had their finger pinched between two of the chucks, resulting in a left index fingertip amputation.",0
An employee was securing a zip screw onto a duct hanger when they missed a step on the ladder and fell to the ground. The employee sustained a heel fracture.,1
"On January 24, 2023, at 10:43 AM, an employee was operating a press to bend a plate when his right index finger was partially amputated.",0
An employee was walking and rolled his foot on a frozen dirt clod. The employee fell to the ground and sustained a broken ankle.,1
An employee was remotely monitoring equipment when he noticed and reported an equipment issue that indicated a motor was not performing within parameters. He and another employee went to check the equipment in the field when an arc flash occurred. Both employees sustained burns to both hands and to the head. One employee was hospitalized.,1
"An employee was changing the sawblade on a labeler. When he applied pressure as part of the installation, the blade cut through plastic sheathing and lacerated his right palm. He was hospitalized.",1
"An employee was standing on the fourth step of an 8-foot A-frame ladder, installing a clamp on a basket tray for an electrical installation. The ladder tipped over as he was adjusting his footing. He fell, landing on his left heel and breaking it.",1
An employee was cleaning a machine when a glass plate broke and his wrist was cut. The employee was hospitalized.,1
"An employee was moving a 50-foot beam from a cart to the floor when the beam struck his heel. The employee then twisted his body with his left foot planted on the ground, causing him to fall. He sustained a left lower leg fracture.",1
An employee was installing a spring on a 3x5 door when the spring popped off and struck the employee on left side of head.,1
"An employee was taking the escalator up to the second floor and had their hand on the right railing of the escalator. A bearing in the railing broke, causing the railing to stop while the rest of the escalator kept moving. The employee then lost their balance and fell down the escalator, resulting in a lower back contusion, lacerations to the right lower leg and back of the head, abrasions, and shoulder pain.",1
"On January 25, 2023, an employee was using a scissor lift to set HVAC equipment up on the roof of a home/airplane hangar. The scissor lift was near the hangar's rollup door. The door was opened and knocked the scissor lift over; the employee jumped to the cement floor, about 14 feet below, to avoid being crushed by the falling lift. He suffered fractures to the pelvis and ankle and was hospitalized.",1
"An employee was operating a forklift to load pallets inside of trailers. While on the forklift inside of a trailer, the employee reached through the forks from her seat to place a shipping label on a pallet. The controls were pressed and the pallets came down on her right forearm, resulting in a fracture in two places.",1
An employee was being trained in the packing department when they fell to the ground. They were hospitalized with three broken ribs and a punctured lung.,1
"An employee was moving special tooling back into a shipping stand when the locking pin latched incorrectly, allowing the counterbalance weights to slide to the end of the tooling. The weight slid past the safety stop, pinching the employee's right middle and ring fingers. The employee sustained two fingertip amputations.",1
"An employee was struck by a utility vehicle that was backing into a shop to load a piece of equipment. The employee sustained left forearm fractures, a left patellar fracture, spinal fractures, and a cerebral hemorrhage.",1
"An employee was speaking with a co-worker when their right ring finger got caught and crushed in a sliding gate, resulting in an amputation above the first knuckle.",1
An employee on a surveying crew fell on the ground and was found unconscious. The employee sustained a skull fracture.,1
"While coming down a stairway, a temporary employee tripped and fell on their side, suffering a broken hip.",1
"An employee was walking into work when they slipped on ice and fell to the ground, resulting in a broken wrist and pelvis.",1
"An employee was going to clean build-up from the roller cylinders on a machine. As he was walking to the machine, he slipped and his left hand was caught between two cylinders, which resulted in a degloving injury that required hospitalization.",1
An employee was recycling honeycomb from a catalytic converter. A small piece of metal was caught in the opening where the blade enters the base of the guillotine shear. The employee was dislodging the piece of metal using a hammer and the force of the shear itself. His right index finger was under the handle of the hammer when the press contacted the hammer and crushed it. The fingertip was medically amputated.,1
An employee was installing insulation in an attic when he was later found unresponsive.,1
"An employee was gathering carts and bringing them back to a building when he fell, resulting in a broken leg.",1
"An employee was opening the door to a vertical lathe to remove a part. The part pushed open the door and fell onto him. It struck him, knocking off his hat, and then landed on his right foot. His toes were fractured and two were medically amputated. He also suffered a minor abrasion on the right side of his forehead. The employee was hospitalized.",1
"An employee's safety vest was caught in a rotating shaft, causing them to be pulled into a machine. The employee sustained a broken upper arm.",1
An employee went up to a roof to retrieve his tools from the day before when he slipped off the roof and fell 32 feet. The employee sustained an injury to spinal vertebrae.,1
"An employee was moving parts using a manual push cart. The employee turned the cart and parts tipped over and struck the employee, resulting in fractures and lacerations to the left leg and arm.",1
"An employee had just used a single-serve coffee appliance and upon unplugging the machine, they received an electric shock. The employee experienced persistent numbness in the left hand and pain that radiated up their left elbow.",1
"An employee was changing the lining of a trash can in the break room when they became tangled in a cord attached to the handle of a trash can. The employee tripped and fell to the floor, resulting in a hip fracture.",1
"An employee was emptying trash into a dumpster when caustic soda that was in a container splashed in his face. The employee sustained chemical burns to his lip, tongue, and face.",1
An employee slipped on a newly waxed floor and suffered a broken femur and a broken right wrist.,1
"An employee was manually rotating a large centrifuge while cleaning it with a power washer when their right-hand fingers got caught between a belt and pulley, resulting in a fractured index finger and an amputation of the middle fingertip.",0
"On January 25, 2023,at 9:15 a.m., an employee was cleaning a fryer full of hot oil. As they adjusted a section above the fryer, they slipped and their left leg went into the fryer, resulting in burns that required hospitalization.",1
"An employee was using a rolling chair to reach a presentation easel on top of a cabinet in a conference room. The rolling chair slid on the linoleum floor, causing the employee to fall from the chair and land on her left side on a metal paper organizer. The employee was hospitalized with a lacerated spleen.",1
An employee was on top of a tanker truck on a platform taking samples and performing cleaning tasks. The employee fell approximately 11 feet to the ground and was hospitalized.,1
"An employee was working on a malfunctioning pneumatic arm that grabbed tire tread and pulled it onto a conveyor belt. While the employee was investigating the malfunction, the employee's right little finger was caught in a pinch point on the arm. The employee suffered an amputation to the finger.",1
An employee delivered a package weighing approximately 119 pounds to a customer and suffered a back injury.,1
"An employee was walking into the building for work when they slipped and fell to the floor, resulting in a right ankle fracture that required surgery.",1
An employee was hospitalized after experiencing a cardiac event.,1
An employee was pushing down on a metal bar when he fell. He suffered a broken right leg/ankle.,1
"An employee was using a razor blade to cut an intake tube when the blade cut his fingertip and nail, resulting in an amputation.",1
An employee was operating a forklift when this hand was crushed between the forklift and the steel door. He was hospitalized.,1
"A temporary employee was rolling metal through a roll forming machine. Her left thumb and index finger were caught between the rollers of the machine, causing amputations to the index fingertip and thumb tip without bone loss.",0
"An employee was standing on a foot stand on the side of a garbage truck. As he stepped back and off the stand, an oncoming vehicle struck his left side, resulting in fractures to his face and pelvis.",1
"An employee was using a scissor lift to access a commercial building rooftop under construction. As he attempted to step on the roof edge, he fell approximately 40 feet to the ground, landing on both legs. The employee sustained fractures to both legs, which required surgery and hospitalization.",1
"A co-worker was pulling a pallet jack and caught the back of the injured employee's foot, resulting in lacerations to the foot.",1
"An employee was setting up a sheet metal folding machine to bend metal. The machine was activated and crushed her left index finger, causing an amputation.",0
An employee was performing an insulation inspection at a jobsite when he lost his footing and fell from a staircase landing. He sustained a fractured pelvis.,1
An employee was loading a ladder and tools onto a truck. The employee was found on the ground next to the truck unconscious; the employee sustained a head injury.,1
"An employee was assisting in positioning a large closet-style safe for removal from a retail store. While it was positioned on skates, the 4500-pound safe tipped over and struck the employee, resulting in a partial amputation of the fourth toe.",0
An employee was working on an extension ladder inside of a residence when the ladder slipped out from underneath him. The employee fell approximately 8-9 feet onto the tile floor and sustained a femur fracture.,1
An employee's left little fingertip was amputated by an energized metal detector.,1
"An employee was working for a canning operation when her left hand contacted the conveyor belt on the can track, resulting in a partial amputation of her middle finger and an avulsion to her ring finger.",0
"On January 26, 2023, an employee was repairing the secondary cylinder of a forklift, which is located at the forklift's mast. The forklift's mast was jacked up so the employee could install the shims from the top of the cylinder. As the employee was installing the shims from the top of the cylinder, the jack came off from underneath the mast of the forklift, and his right hand was caught between the piston and the mast. The employee's right ring finger was amputated at the first knuckle.",0
"An employee slipped on a patch of ice while getting out of a truck, resulting in a broken femur.",1
"An employee was cleaning rollers on a coating machine when their right index, middle, and ring fingers were crushed, resulting in amputations of all three fingers.",0
"An employee was removing a 4-foot section of gridding from a fixture when a shelf became dislodged, fell, and struck the employee. She was hospitalized for a head contusion.",1
"An employee was scanning items when she turned around and tripped over a clothing rack. The employee fell backward and struck her head on a jewelry counter, resulting in a head injury.",1
"An employee was cleaning up their work area when they tripped and fell to the concrete floor, resulting in a hip fracture.",1
"An employee was walking in an outdoor parking lot when she fell, striking her chin on the pavement. The employee was hospitalized and was diagnosed with a concussion, spinal compression injury, and brain bleed.",1
An employee was standing on a chair with rollers to reach an item when he fell approximately 3 feet to the ground. The employee was hospitalized with a broken right knee and an ankle injury.,1
"As another employee was performing a battery change on material handling equipment, the injured employee removed a piece of debris from the housing. The injured employee's hand was caught between the battery and the battery housing. The injured employee was hospitalized, and their right ring and middle fingers were partially amputated.",1
"An employee's keys went into the deep fryer. Upon retrieving them, the employee sustained burns to their right hand from hot grease.",1
"On January 26, 2023, at 8:30 AM, an employee was climbing down an extension ladder from a roof when they slipped and fell. The employee sustained a knee injury and was hospitalized.",1
"Employees were changing out the die on a press. Each die weighs about 1,200 pounds. A forklift was used to raise the top die and insert it into the keyway pocket, and the die had to be rotated in order to fit. The injured employee was turning the die with his hands to line it up properly, and the forklift was holding the die in place against the keyway pocket. Once it was aligned, it slipped into the keyway pocket, and the injured employee's left index finger was pinched and amputated.",1
"An employee was stacking insulation on a flatbed truck and fell off the truck approximately 4 feet to the asphalt driveway, resulting in five broken ribs.",1
An employee was delivering mail when they were bit by a dog and sustained a laceration.,1
"An employee was pruning a tree at an elevated height when the tie-in point on the limb he was secured to failed. The employee fell to the ground, resulting in a fractured ankle.",1
"Employees were picking up barrels in a construction zone when a vehicle swerved to avoid a collision with a truck, and over-corrected, striking two employees. One employee sustained scrapes while the other employee was hospitalized for multiple fractures to the pelvis and legs.",1
"An employee and co-worker were removing horizontal beams from warehouse racking. The employee turned to talk to a co-worker and as the employee turned back around, the beam they were moving struck him in the face. The employee sustained a C7 vertebra fracture, concussion, and a cheek laceration.",1
"An employee was working with a crew installing metal plates and a holder on a 26-foot slide gate. As the employee was pulling on the steel gate, which weighed approximately 800 pounds, the gate was pulled beyond the back rollers holding it in position, which caused the gate to pivot and fall onto the employee's foot. The employee sustained fractures on the third, fourth, and fifth metatarsals on their right foot, and an amputation of the right fourth toe.",0
"An employee was rolling a drill pipe into the shot blaster. The shot blaster door closed as the employee was pushing the pipes into the machine. The employee's left hand was caught between the pipes and the shot blaster door, resulting in a partial amputation of the left middle fingertip as well as a fracture.",0
"On January 26, 2023, at 10:34 PM, an employee was driving a walkie-rider to a semi truck to prepare the load to be sent out. After dismounting, the walkie rider began to move and struck the employee in the leg, resulting in a right leg and ankle fracture.",1
"An employee was operating an ice resurfacer and was going to clear the ice buildup and empty the snow tank in the machine. The employee's right little finger came in contact with the auger, resulting in amputation.",1
"Two employees were working to repair an axle on an electric pallet jack. The injured employee was working underneath a pallet jack. As the co-worker held the tensioner, the pin came out, causing the pallet jack to collapse onto the employee underneath. The employee sustained an upper sternum fracture and was hospitalized.",1
"An employee was walking on the sidewalk outside of a facility when they slipped on a patch of ice and fell, striking their head. The employee sustained a skull fracture.",1
"An employee was picking up a food order from the order up window when she walked into an open stainless steel cabinet door. The employee fell to the floor and landed on her left hip, resulting in a broken hip.",1
"On January 26, 2023, at 11:30 AM, an employee was installing a brace in the top slot when the brace jumped, causing the employee's hand to become lodged between the column and concrete wall. The employee sustained partial amputations of the thumb, index, and middle fingers at the first knuckle.",0
An employee was supervising crane operations when their right middle finger was caught in a container that the crane was lifting. The top of the employee's right middle finger was amputated.,1
"An employee was standing on a chair to work on a latch on a door. The employee fell from the chair to the tile floor below. She was hospitalized with fractures to her knee and lower leg, which required surgery.",1
"An employee was conducting culvert cleaning operations using a sewer jet when the hose struck the employee on the head, resulting in a skull contusion. The employee was hospitalized.",1
"An employee was installing oriented strand board (OSB) along the outer edge of a platform. He left to replace the battery in his cordless saw. When he returned, he stepped onto a piece of OSB and fell approximately 5 feet onto an exposed stair stringer. The employee was hospitalized with two fractured vertebrae in the neck.",1
"An employee was using a band saw to set up steel tubing when their finger was crushed in the hydraulic clamp, resulting in a left index fingertip amputation.",1
"An employee was troubleshooting an engineering workstation next to his desk and moved equipment in the area for better access to make repairs. After repairs were completed, the employee stepped backward, tripped over a power cord, and fell sustaining a hip fracture.",1
"An employee was using a snow thrower to clear snow from company property when their left hand was caught in the machine, resulting in an amputation of the ring finger from the nailbed up and fractures to three fingers.",1
"An employee was removing a core shaft on a machine when the core spacer moved on the shaft. The employee's right index fingertip was pinched between the core spacer and shaft, resulting in amputation.",0
An employee was walking on a concrete platform when their foot became stuck on a bolt that was protruding from a metal grate. The employee fell to the floor and sustained a head injury.,1
"An employee was walking by a lift when he tripped and fell to the ground, resulting in a hip injury.",1
"An employee was repairing a forklift. The vise chain had been placed on the outer core barrel while the inner core barrel was being removed. The outer core barrel was moved and the employee's left hand was caught between the handle of a chain vise and the fork of the forklift, resulting in amputation of the left ring finger above the knuckle.",0
"An employee was changing the battery on a forklift when the battery popped, causing plastic pieces from the battery casing to lacerate his eyelid area.",1
"An employee had just finished connecting a chain and hook to a steel mold D-ring in order to remove the mold from a plastic injection molding machine. As the employee was adding tension to the chain, the D-ring snapped, causing the hook to strike the employee. They sustained lacerations to the head and nose, as well as fractures to the nose, forehead and right cheek bone.",1
"An employee was performing maintenance on a ride-on vacuum when his left middle finger was caught in the drive belt, resulting in a fingertip amputation.",0
"An employee was scraping the walls and ceiling of a barracks room in preparation for paint. The employee fell from the footboard of a bed to the floor below, resulting in leg fractures.",1
An employee was moving a steel plate. One end of the plate slipped after it was lifted and caught the employee's right index fingertip against another plate. The employee suffered a partial amputation to the finger.,1
"An employee was cutting metal with a vertical band saw when stock began to roll off the table. As the employee reached for the stock, his right index, middle, and ring fingers were amputated by the band saw blade.",0
An employee was pushing a hopper cart full of dough when their right index finger was caught between the wheels of the cart and a rail. The fingertip sustained an amputation with an open fracture.,0
An employee was rigging and guiding loads during crane operations. The crane lifted a 212-pound generator and tipped over with the boom crushing a nearby structure. Two employees on top of the structure jumped clear of the falling crane boom. A stanchion pole impaled the injured employee's upper thigh and they sustained lacerations to the thigh and buttocks. The second employee did not require medical treatment.,1
"An employee was helping to unload bags from an aircraft's cargo compartment when they fell out of the aircraft, resulting in a fracture.",1
An employee was offloading hay from a pallet jack when she fell backward off the pallet jack and struck her head on a wall and then on the ground. The employee sustained a concussion.,1
"On January 27, 2023, an employee was taking the trash out to the dumpster located outside at the back of the building when she tripped and fell over the wheel blocks of the dumpster and onto the asphalt pavement. She sustained a left compound wrist fracture that required hospitalization.",1
"An employee was moving a power supply unit from a vehicle to a cart when the equipment fell, pinching the employee's finger between the cart and the equipment. The employee's left ring fingertip was amputated.",0
"An employee was holding a single sheet down to gap the feed gate while the machine was running. When the roll grabbed the sheet, it pulled the employee's finger into the roll, resulting in amputation of the left little fingertip.",1
"An employee was carrying an approximately 3-pound part out a door when they tripped over the door threshold and fell to the ground, resulting in a fractured hip.",1
"An employee was emptying a self-emptying trash dumpster. When the lever came down onto the track that guides the hopper into the dumping position, the employee sustained partial amputations to the right middle and index fingers.",1
An employee was disembarking a forklift when it rolled over their foot.,1
"An employee was using a compressor to fill air into a trailer airbag when a forklift backed into the employee, pinning them against the freight in a trailer. The employee sustained bilateral ankle fractures.",1
An employee was carrying work materials and supplies when they slipped on ice and fell. The employee was hospitalized.,1
"An employee was walking with an empty box, traveling from the shipping/receiving area toward the south end of the shop. He tripped on an object and fell, resulting in a hip fracture.",1
An employee was inspecting a site and measuring the ceiling of a building while on a 5-foot baker scaffold. The employee fell to the ground and sustained an ankle fracture.,1
"An employee was working on an HVAC unit when a strap released, causing a 1,200-pound steel plate to fall onto the employee's right foot, resulting in four fractures that required surgery. The employee was hospitalized.",1
"An employee was walking through the store when she tripped over the floor transition where the floor changes from concrete to tile. She fell to the floor, landing on her shoulder. The employee sustained a shoulder fracture.",1
"An employee was using a lathe when their glove became caught in the rotating machine, resulting in multiple fractures of the left arm.",1
"An employee was making a delivery to the store when he slipped and fell on ice, resulting in a right  hip fracture.",1
An employee was making adjustments to a machine to correct defects when they sustained a partial amputation of the right index finger.,1
"An employee was unpacking and removing wrap and bands from pallets of wheels. While removing a piece of plywood (39 pounds and 4'x4') from a stack of wheels, the employee lifted the pallet up on the right side, allowing the plywood to slide down the left side between the pallet and the walkway guard rail. The employee went to stop the plywood from hitting the conveyor guard when their little finger was crushed and amputated between the plywood and machine guard.",0
"An employee was cutting short loin with a band saw when they sustained a partial amputation, dislocation, and fracture of the right thumb.",0
"An employee was performing preventative maintenance on a cooler. As the employee was lubricating the machine's pusher arm, the main drive arm engaged and struck the employee's left finger, resulting in a fingertip amputation.",1
"On January 29, 2023, at approximately 12:30 AM, an employee was operating a roller and die machine when their finger was caught in the point of operation, resulting in amputation.",1
An employee had just finished backing in a truck and letting the ramp down in the loading dock area. The employee walked over to the other dock and went down the ramp to exit when they were struck by a forklift. They sustained three toe fractures on the right foot.,1
An employee was walking in the parking lot to clock in to work when they slipped on ice and fell to the ground. The employee sustained a left knee fracture.,1
"An employee was pruning a maple tree. He was at about 20 to 30 feet, advancing up the tree, when the limb his climbing line was tied into failed. He fell to the ground and suffered a lower back fracture.",1
"An employee was untangling a section of copper rod as it was being pulled through drawing equipment. The employee was possibly caught in the copper rod and fell from the payoff to the concrete floor, resulting in a head injury and leg fracture. The employee was found unconscious.",1
An employee was using the hose of a vacuum truck to vacuum up oily water when their hand was sucked into the hose. The employee was hospitalized with a muscle injury.,1
"An employee had placed a keeper on a spade and ducked under the spade to place another keeper. The employee tripped while going under the spade and fell into a hand rail, resulting in five broken ribs.",1
An employee was using a propane heater to thaw a line on a snow blower when they became ill due to carbon monoxide poisoning from a leak in the tank.,1
"An employee was bolting up internal manways inside a tower. The employee was performing closures on the manways covers when they fell approximately 7 to 9 feet to a lower level. The employee sustained a collapsed left lung, a laceration behind the right knee, and a fractured left scapula.",1
Two temporary employees were working as valet attendants; one employee was driving and the other was waiting for the vehicle to be pulled around. The injured employee was struck by the vehicle and sustained an amputation to the right leg below the knee as well as trauma to the abdomen.,1
"On January 30, 2023, an employee was performing metal stud framing on a rooftop when they fell to the ground. The employee was hospitalized with a broken leg and a concussion.",1
"An employee was struck by a forklift, resulting in a right ankle injury.",1
"An employee was dismounting a scissor lift when a nail gun discharged. The nail penetrated the employee's skull above his right ear, resulting in hospitalization.",1
"An employee was walking to check on an issue with a coating line when they slipped and fell, resulting in a fractured left hip.",1
"An employee was leaving work when they slipped on ice and fell to the ground, resulting in a back injury.",1
"An employee was standing next to a stretch wrap station where rolls of backing are unloaded from a doff truck. As the employee walked between the doff truck and the wrapping table, the truck was doffing a roll of carpet backing. The roll of backing struck the employee, knocking him to the ground, and pinning one of his legs under the roll. He sustained a non-displaced fracture of the hip and pelvis.",1
"An employee was done working on the jobsite for the day and parked his truck at the office. While walking into the building, he slipped on the sidewalk and struck his head against the concrete, resulting in a concussion.",1
"An employee was rigging a steel beam that weighed approximately 3,500 pounds. The beam shifted during a realignment operation using a forklift and pinned the employee's foot between the steel beam and an adjacent wall. The employee's foot was fractured.",1
"An employee was operating a roller machine. While feeding a metal part into the roller, his left hand went through the rollers and was crushed, resulting in an amputation.",1
"An employee was exiting their car when they slipped on ice and fell, resulting in a possible compression fracture.",1
"An employee slipped on ice in a parking lot, fell to the ground, and suffered a broken leg.",1
"An employee was using a press, a spacer, and a lift. The press and the spacer were being used together but were not permanently affixed to each other. At the end of the order, the employee clamped the spacer and the press together with a C-clamp and tried to remove them from the operation by flipping the press over. His fingers were pinched in the gap between the press and the spacer next to the C-clamp.",0
"Two employees were collecting trash in a dump truck. A mechanical device on the truck was activated while the injured employee's hand was in a pinch point, resulting in an amputation to the right middle finger.",0
"An employee was staging heat treat baskets on a roller line so they could be picked up by a hoister crane. The employee pushed a basket away from another basket, and it rolled back and struck the employee, catching his right ring finger between the two baskets. The employee sustained a fingertip amputation.",0
A boiler operator was participating in a confined-space training when they became ill after being exposed to carbon monoxide. The employee was hospitalized.,1
"An employee was performing preventative maintenance on a slitter, and was lubricating the chain and sprocket assembly. As the chain was being cycled forward to reach additional sections, the employee's right index finger was caught and pulled through the sprocket assembly, resulting in a partial amputation.",0
An employee was trying to repair a hose on a forklift when the mast fell on his foot.,1
"An employee was clearing a jam in a mill when a bolt fell, catching the employee's finger in the die. The employee sustained an amputation.",0
"An employee was adjusting a scaffold when the scaffold collapsed, causing the employee to fall approximately 145 feet to the ground. The employee was hospitalized with a fractured pelvis and broken bones in their back.",1
"An employee was sweeping the floor next to a stack of nested empty racks when the racks fell over and struck the employee. The employee sustained injuries to the head, neck, and lower back.",1
An employee was cutting PVC pipe on a table saw and partially amputated his left thumb above the knuckle.,1
An employee was standing next to a portable electric heater. The lower right leg of the employee's coveralls caught fire due to the presence of a flammable substance on the coveralls and reignited twice during efforts to put it out. The employee suffered second- and third-degree burns to the lower right leg.,1
"An employee was using a 20-25-foot carbon steel rod in a reactor to ensure that residual product was not blocking the valves. A flash fire occurred inside of the hydrocarbon-enriched reactor, causing the employee to sustain burns from the employee's neck to their waist.",1
"An employee was at the top of a rolling step lock ladder taking a bolt out of a sprocket using a box wrench. When the bolt broke loose, the employee lost his balance and fell backward 4-5 feet onto the floor. He sustained fractures to the clavicle, scapula, and three ribs as well as a laceration to the back of his head.",1
An employee was carrying a door up an exterior stairwell when he injured his back.,1
"An employee was struck by a forklift while walking in the yard resulting in a broken left ankle and broken right foot, which required surgery.",1
An employee fell from the fourth rung of a fixed ladder to a concrete surface and sustained fractures to his left scapula and rib as well as a scalp laceration.,1
An employee was assisting production workers and looking for issues on top of the oven. The pulley system on the blower motor engaged and the employee sustained a partial amputation of the right index finger.,0
"An employee was delivering mail when he slipped on snow and fell to the ground, resulting in a broken pelvic bone.",1
An employee was building floor joists using a nail gun when a nail struck his foot.,1
An employee was backing up a forklift when his left foot was crushed between the forklift and a warehouse support beam. He sustained two broken toes and required stitches.,1
"A 48-inch steel pipe was being installed under railroad tracks. The pipe encountered an old timber bridge. The employee entered the pipe with a gas-powered chainsaw to cut out the obstruction. Afterwards, the employee became dizzy and fell. He was hospitalized for carbon monoxide exposure.",1
"An employee was connecting stringer beams to the floor beam when he fell 21 feet from a beam onto a work barge in the river below. The employee sustained fractures of the right forearm, two fingers, and pelvis, as well as a forehead laceration.",1
"An employee was using a pneumatic grease pump to perform maintenance on a machine when his right ring finger was caught in the moving mechanism of the machine, resulting in a fingertip amputation.",0
"An employee was helping a crew set up a derrick. The employee was holding the counterweight line away from the derrick to make sure the counterweight itself didn’t make contact with the derrick. The counterweight got caught on the derrick, and the line that was pulling the counterweight up was parted. The counterweight came down the guide line that the employee was holding, striking him in the upper left thigh. The employee sustained injuries to his left thigh and the bones around his left eye.",1
"An employee was moving material when a steel plate struck his right little finger, resulting in an amputation at the distal interphalangeal joint.",1
"An employee was walking when they tripped and fell to the ground, resulting in a hip fracture.",1
"An employee was pulling up wellheads using a slip puller when the tubing line parted, causing the traveling blocks to fall on the employee's arm. The employee sustained an elbow fracture.",1
"An employee was coming into work and exiting the parking garage when she slipped and fell on ice, fracturing her right ankle.",1
"An employee was moving bundles of metal channels off the forks of a forklift by hand to put on the dock floor. The banding broke and the employee's fingers were crushed between the floor and the bundle, resulting in a partial amputation of the right middle finger.",1
"An employee was assisting to erect the first tilt panel with the help of a crane. The crane cabled down to lower and set the panel. The employee had gone to the foundation level and the panel swung, trapping him above the waist between the panel and dirt bank, resulting in a punctured lung and rib fractures.",1
An employee was reviewing paperwork that was placed on the front bumper of a digger truck when a skid steer backed over the employee's left foot. The employee sustained multiple foot fractures.,1
An employee was hooking up a tractor to a low bed trailer when the tractor and trailer started rolling. The employee was hospitalized with injuries to their legs.,1
"An employee was using a pry bar to remove a coupler attached to a carrier plate from the end of a railcar. The coupler and the carrier plate fell, catching his left hand against a gear table. He suffered three broken bones and a laceration to the hand.",1
An employee was loosening a flange during maintenance shutdown when they were exposed to nitrogen oxide (NOx) gas. The employee was hospitalized with respiratory irritation.,1
"An employee was cleaning the interior of a bus. As he stepped back, he lost his footing and fell out of the bus onto the concrete floor of the wash bay. The employee struck his head and right elbow on the concrete; the elbow injury required stitches/staples.",1
"An employee was wrapping a pallet of material using a manual handheld stretch wrap tool. He tripped over the bottom corner of the pallet, fell backward, and landed on a stationary metal roller in the plant floor that product is kept on (approximately 16 inches high). The employee sustained fractures to the first lumbar vertebra and five ribs on the left side.",1
An employee was working on spouting while on a step ladder when he fell 8 to 10 feet to the ground. He was hospitalized with two broken wrists.,1
"An employee was removing old wiring on an old fire pump. While relocating wires inside the old switchgear, an employee received an electrical shock. The employee was pulled from the switchgear by a co-worker due to the electrical current holding them to the switchgear. At that time, the employee also received a laceration to his left hand and forearm. The breaker was locked out/tagged out at the time.",1
An employee was lifting a dock plate when his hand slipped and his right index finger was partially amputated.,0
An employee was driving a company truck when he began experiencing knee pain.,1
An employee was replacing bearings on a compressor shaft when the shaft fell and struck the employee's hand. The employee sustained a laceration and fracture to their left ring finger.,1
"During a conveyor inspection, an employee fell 13 feet to a concrete floor and sustained a skull fracture.",1
"On January 31, 2023, an employee was holding one end of the bracket (used on a military vehicle) with his left hand while drilling on the other end of the bracket. The bracket swung to the left and struck his thumb, causing an amputation without bone loss.",0
"An employee's left index finger was crushed inside a pounder machine when reaching for a roll, resulting in amputation of the finger.",0
An employee was performing preventative maintenance on an air conditioning unit in the mezzanine area when they fell off the platform and through the ceiling to the closet approximately 9 feet below. The employee sustained a fractured right shoulder.,1
"A two-person team was removing hydraulic cylinders from a bulldozer. The tooth of the ripper was removed and the frame was resting on wooden cribbing. The lower portion of the ripper frame remained connected to the unsupported H-frame by an articulating pin. The injured employee was using his left hand to hold the striking point of a side sledge hammer against the retaining pin of the cylinder being disconnected while a coworker used the hammer. Upon freeing the pin, the H-frame immediately settled toward the ground, causing the ripper frame to rotate around the articulating pin connecting it to the H-frame. The employee's left arm was caught between the frame and hammer, resulting in a forearm fracture.",1
"An employee slipped on ice in a driveway and fell, resulting in a right tibia and fibula fracture.",1
"An employee was performing an installation of service wire when they fell from a six-foot A-frame ladder to the ground, resulting in an ankle fracture.",1
"An employee was closing a gate. The hinge of the gate caught the employee's left index fingertip, partially amputating it.",0
An employee was walking up the steps to the front porch of a client when they slipped on the icy porch steps and sustained a patella fracture.,1
"An employee was stacking sheet metal on a rack when a piece fell out of the rack and struck the employee. The employee then fell backward and struck his head, causing him to lose consciousness and sustain a concussion.",1
"An employee was using a worm drive saw to cut wood when his thumb was lacerated, resulting in a fingertip amputation.",0
"An employee dropped a sample off at a lab and was leaving on a utility vehicle. As the vehicle was backing up, it flipped onto its side and the employee sustained a right arm fracture and left hand laceration.",1
"An employee picked up one end of a 300-pound motor, stepped back to put it on a stand, and slipped on ice. As he fell backward, the motor struck him mid-chest. His sternum was fractured in two places and four of his ribs were broken.",1
"On February 1, 2023, an employee slipped while walking between two office cubicles. The employee landed on their left knee and suffered a hairline fracture to the kneecap.",1
An employee suffered a hip injury while picking up a 50-pound bag of potatoes.,1
"The injured employee was preparing breakfast at work while another kitchen employee was pushing a patient food cart. As the injured employee turned to walk toward the serving line, she  struck the moving food cart on her right side. The force of impact knocked her to the concrete floor and she sustained a hematoma to the left glute that required hospitalization.",1
"An employee was walking into a building from a parking lot. She slipped on an icy sidewalk and fell, landing on her left leg and suffering a broken left fibula and tibia.",1
An employee was walking across the parking lot next to the hospital when he slipped and fell on icy pavement. The employee was hospitalized that evening with a possible ruptured spleen and bleeding around the pelvis area.,1
An employee was using a crane to lift a part from a pallet. The anchors came loose and fell from the concrete and the crane fell on top of the employee. They sustained a laceration to the head as well as arm and leg fractures.,1
"An employee was standing with one foot on the edge of a lift, leaning in to read the part number on a carton. He stepped back, began to fall, and grabbed the rack support to stop himself from falling. A hole in the rack caught his right little finger and amputated it.",0
"On February 1, 2023, an employee walked past a moving forklift when a container that was placed onto the vehicle forks fell off and struck the employee, resulting in fractures to her right shoulder and left knee.",1
"A piece of steel plate was being hoisted by a crane into a building. The chain used to lift it came loose from the lifting hook, due to ice on the plate, and the plate fell. It landed on an employee's legs and feet. He was hospitalized for lacerations on both shins that required stitches, as well as an injury to the right foot that required surgery.",1
"On February 1, 2023, an employee and co-workers were performing maintenance on a board stacker by replacing the chain. They removed some slats to help guide the boards and pulled a pin on the coupling to the dual sprocket drive. The weight of the remaining slats then caused the chain to move up on the inside as the slats moved down on the outside. The employee's ring then became caught on the chain, resulting in the amputation of his left ring finger above his first knuckle.",0
"An employee was unloading a postal cage from a delivery truck when they fell from the lift gate. The postal cage then fell onto the employee, resulting in a left tibia fracture that required hospitalization.",1
"An employee was preparing to cut metal scrap with an acetylene torch. The employee's glove caught fire, and the employee suffered burns to the left hand. The employee was hospitalized.",1
"An employee was removing a hydraulic thumb from an excavator. When the employee removed the pin, the thumb fell, striking the employee on the left foot. He sustained a laceration and broken bones in the foot. The employee was hospitalized.",1
"An employee was delivering a parcel on route when they slipped on wet leaves and fell on a cross tire, resulting in an ankle fracture.",1
An employee was welding in a work area when a skid steer turned and struck a maintenance employee on the back. They sustained neck injuries.,1
"An employee was drilling holes and installing gutters on a roof when they fell approximately 20 feet, resulting in wrist, arm, and hip fractures.",1
An employee was conducting security checks around the perimeter when he slipped on a patch of ice and sustained an ankle fracture.,1
"An employee was standing outside checking cars when a vehicle moved closer to the employee. As the employee backed away, he fell and his leg became caught on the pipe railing. He then fell into a ditch and landed on his back, resulting in a fracture.",1
"An employee was in a lab looking at a computer screen. As they changed positions to get a better look, the employee tripped over their chair leg and fell to the floor. The employee sustained a left shoulder fracture.",1
"An employee was inspecting parts as they came off an assembly line. The employee lifted a part with his left hand and the other end of the part became caught on the line, pinning his hand between the part and a light pole. The employee sustained amputation of the left ring finger.",1
"An employee was setting a wooden pole in the ground when the pole struck the employee, resulting in a skull fracture.",1
An employee was cleaning a mixer and grinder. The machine amputated the employee's right index finger.,0
"An employee was using a saw machine to cut sausage patties. The saw blade amputated his right middle fingertip, including the nail.",0
"An employee was cutting a casting with a band saw. After the cut, he was trying to move the cut piece of casting away when the sawblade caught his glove. Two of his fingers were amputated.",1
"An employee was preparing to perform maintenance on a dryer dust collector. The employee's hand was caught in the vain feeder, resulting in four right finger amputations. The machine was not locked out at the time.",0
An employee was backing up a forklift when his left foot was caught between it and another forklift. The foot was broken.,1
"An employee was walking from a kitchen to a dining room. She slipped on the wet floor, fell, and sustained a lower left leg fracture.",1
An employee was walking to his car in a parking lot. A vehicle struck him and pinned him against another vehicle. He was hospitalized and underwent abdominal surgery.,1
An employee was operating a die forger. The machine cycled while he was clearing a stuck part from its outlet. His right hand was crushed between the die forger's working surfaces and was subsequently amputated.,0
An employee was throwing material into a dumpster when they sustained a tibia fracture and a dislocated patella.,1
"An employee was working on a notcher machine. The machine's spinning blade struck the employee's left index and middle fingers, amputating each at the second knuckle.",0
An employee was on a ladder installing a downspout on a gutter. The employee fell from the ladder to the ground 6 to 15 feet below and sustained fractures.,1
"An employee was delivering material to a jobsite, slipped off the lift gate of a truck and fell to the ground. The employee suffered a hip injury.",1
"A sewer snake machine was binding. An employee was trying to release the binding pressure when the machine released with force and struck his right hand, severing his little finger just below the fingernail.",0
"An employee was clearing a jam on a packing machine when her left hand contacted the sealing jaws, resulting in an amputation of the middle fingertip and an avulsion of the ring fingernail.",0
"An employee was working in a kitchen, lifting a tray of chicken skins to be placed in a cooler, when he slipped on a wet floor. He fell and landed on his back, suffering injuries to the back, head, and shoulders.",1
An employee slipped on ice walk walking from his car to the workplace. He hit his head and suffered a concussion.,1
An employee was standing in a parking lot by a truck when he slipped on ice and broke his ankle.,1
An employee was using a table saw to cut wood strips. The employee slipped and suffered an amputation to the left little finger. The machine was unguarded at the time.,0
"On February 2, 2023, an employee was lifting a heating coil when the lift rigging broke. The employee suffered a severe hand injury requiring surgery.",1
"An employee was standing near a high pressure air compressor (HPAC) unit. The employee turned and tripped over a wood pallet, falling to the ground and suffering a broken left hip.",1
"At 1:18 p.m. on February 2, 2023, employees were moving an 8-by-10-foot road plate, weighing about 3,000 pounds, using a front loader with a fork attachment. The fork was being used to raise one end of the plate so that dunnage could be inserted between it and the plate it was stacked on. The plate slid off the fork while it was 6 inches off the ground and struck the front of an employee’s left foot. He suffered a displaced fracture to the last joint of his left big toe.",1
An employee was working on a wood chipper. The chipper's drive belt pulled in his right hand and degloved his index and little fingers.,1
"An employee was carrying tile when he slipped on a broken piece of it. He fell, twisting and breaking his left ankle.",1
"The main hoist block fell from a crane, striking an employee on his left arm and left foot and fracturing both.",1
An employee slipped on ice while carrying trash to a dumpster. The employee fell to the ground and suffered a broken hip.,1
"An employee was climbing an extension ladder from the first story to the second story roof that had snow on it. The ladder slipped out, causing the employee to fall approximately 8-10 feet. The employee sustained a broken clavicle and a concussion.",1
"An employee was working on a vertical rubber mill, feeding rubber between two drums. The employee's fingers were caught between the drums, causing the amputation of the employee's left ring fingertip.",0
"An employee was carrying a pot of green beans across a room. The pot holders twisted in the employee's hand and caused her to lose her grip; the pot of hot water and green beans spilled down her left arm, burning it.",1
"An employee was installing roof decking. The employee fell through a roof opening to the ground below, suffering four broken right-side ribs, a laceration to the back of the head, and two broken vertebrae.",1
"An employee was installing a belt when her glove was caught between the belt and the pulley. Her left hand was pulled in, resulting in a broken index finger and an amputation to the thumb.",0
"Employees were assembling a crawler crane, using an assist crane to lift and set a drum. After the drum was set, an employee climbed to the top of the boom section and began to slide the drum forward with a pry bar to set the pin. The pry bar slipped, causing the employee to lose his balance and fall from the top of the boom. His head struck the deck of the assist crane before he fell to the ground, and suffered a fractured skull.",1
"Two employees were building pallets using reworked product. They collided as one of them stepped back and the other turned around. The injured employee fell on his right side, sustaining injuries to the right knee and hip. He was hospitalized and underwent surgery.",1
"On February 2, 2023, an employee was operating a thermoforming machine. The employee's left hand was caught in the machine's production area, and the employee's left thumb tip was amputated.",0
"An employee was moving a rider-style pallet jack. He was pinned between the rider platform and a guardrail, suffering a broken left leg that required surgery and hospitalization.",1
"An employee was working on a generator that was said to be leaking oil. He turned it on to find the leak, then backed away. His pants leg caught on part of the rack holding the generator. As he moved to regain his balance, his left index fingertip was caught and amputated by a spinning fan blade.",0
"An employee opened a pair of 550-pound steel butterfly doors and walked through them. While his back was to the doors, one of them broke, fell, struck his back, and pinned him to the ground. He sustained broken vertebrae and a possible broken collarbone that required hospitalization.",1
"An employee was operating a roll press machine. The machine's rollers caught the employee's glove, pulling in the employee's right hand and injuring their index and middle fingers. The employee was hospitalized.",1
An employee was walking inside a building and missed a step on the main entrance staircase. The employee fell to the floor and sustained a head laceration and an arm injury. The employee was hospitalized.,1
An employee was finishing concrete on the ground next to a truck tire. The truck moved forward and then stopped; its tire partially rolled onto the employee's upper leg and broke it.,1
"Employees were unloading a stack of 12-inch by 12-inch by 10-foot trusses off a lift gate. The stack began to tip while it was on the edge of the lift gate, then fell on one employee's leg. The employee suffered a broken tibia and fibula.",1
"As an employee was leaving their work station to go on break, they noticed that paper on a roller that was approximately 5 feet off the ground had folded over. As the employee attempted to fix the roller, their hand became caught between two rollers, resulting in a fingertip amputation and the loss of a fingernail.",0
An employee fell while walking down wet stairs in a home. He suffered a broken ankle.,1
"At 2:06 a.m. on February 3, 2023, an employee was cleaning an extruder system. The employee accessed the second-level work platform to open the lids to access the auger screw used to transfer raw food to the food conditioner. As the employee was using a water hose to clean the auger, their left hand slipped from the auger's housing and into the auger opening. The auger amputated four of the employee's fingers below the first knuckle and the employee was hospitalized.",1
"An employee was exiting his vehicle when he fell in the parking lot, resulting in a fractured hip.",1
"At about 3:00 p.m. on February 3, 2023, an employee was spraying foam insulation in a bonus room when he fell through a 3-foot by 6-foot floor hole. He landed on the concrete garage floor 11 feet below and sustained a rib fracture, a shoulder injury, a punctured lung, and a scalp contusion.",1
"An employee tripped on a loose plastic band while walking across a parking lot, fell to the ground, and suffered a broken arm.",1
"An employee was climbing an extension ladder, set against a light pole, to change a light bulb that was 12 to 15 feet above the ground. The ladder fell to the ground and the employee landed on it, suffering two broken ribs and an injury to a lower back vertebra. He was hospitalized.",1
An employee was working from a telehandler's work platform approximately 19 feet above the ground floor. The employee applied adhesive glue to a trim piece and fell. He was hospitalized for nine fractured ribs and a right hip fracture.,1
"An employee slipped on ice in a parking lot, fell, and suffered a back injury.",1
"An employee was working under water, using a cavitation cleaning system to clean marine growth off a vessel hull. The machine left a hole at the crease of the finger.",1
An employee was riding a horse when it bucked. The employee landed hard in the saddle and sustained a fractured pelvis.,1
"An employee was maneuvering steel bundles supported by an overhead crane. The employee's right hand was caught under or beside the bundle, and a fingertip was amputated at the last knuckle.",0
"An employee was moving material into a meat cooler. The employee slipped and fell, landing on their knee and suffering a broken left femur. The employee was hospitalized and underwent surgery.",1
"An employee was cutting a blister out of a tire wall using a mill knife. The knife slipped and lacerated the employee in the leg, cutting an artery.",1
"While outside on a break, an employee was shot twice in the abdomen by unknown assailants.",1
"Three employees were rolling a portable conveyor. One of its wheels fell into a drain, causing the conveyor to tip and fall onto the injured employee. The employee suffered injuries to the shoulders and legs and was hospitalized.",1
"An employee was cleaning a candy packaging area and went to put the broom back in the storage room. The employee was then struck by a rack that was being moved by a walkie pallet jack, causing her to become caught between the rack and the unloader. The employee sustained two rib fractures.",1
"An employee was performing grounds maintenance work. The employee stepped on the edge of a ventilation grate when it flipped over, causing the employee to fall about 30 feet to the ground below. They sustained two heel fractures and a left tibia fracture.",1
"An employee was operating a tube bending machine. When the control to close the clamp was pressed, it pinched his finger, causing an amputation.",0
"An employee was working on a roof. The employee fell through roof insulation to the ground 25-30 feet below, suffering a broken pelvis and collarbone.",1
"An employee was moving a portable partition wall in a meeting room. The wall came off the track and fell on the employee, who suffered 10 broken ribs and broken vertebrae.",1
"An employee was cutting metal on a plate shear. His right middle fingertip was crushed between the machine's guard and the metal he was cutting, causing a fingertip amputation without bone loss.",0
"An employee was repositioning a vacuum hose at a worksite. The hose was being lowered to the ground from scaffold bracing when it caught the employee's left hand against the horizontal scaffold bracing, resulting in a partial amputation to the little finger.",0
"A temporary employee was using a crane to lift a wire spool that had been placed on a rack. The rod under the crane hook broke. The spool came down, and the back of the hook struck the employee in the abdomen. The employee was hospitalized, requiring surgery.",1
An employee walked into a machine and sharp metal cut his right arm.,1
"At about 1:45 p.m. on February 3, 2023, an employee fell while leaving a cash register and struck his head on the shelves. He suffered an abrasion, bleeding, and swelling above his right eye as well as lacerations to two left-hand fingers.",1
An employee was operating a forklift when it struck a guardrail. The employee suffered a broken lower left leg and was hospitalized.,1
"An employee was on a lift that had been raised to roof height to install trusses. He fell to the ground three stories below, breaking both heels and his right leg.",1
"An employee was guiding film into a pouch-filling machine while the machine was jogging and the employee's right index finger contacted the cutting blade, resulting in a fingertip amputation.",1
"An employee was adjusting the gate opening on a rock bin used in a concrete plant. The gate was opened while the employee's little finger was on the tab, and it pinched his finger, resulting in a fingertip amputation.",0
"An employee was painting spots on a ceiling crown molding. The employee fell from a 6-foot scaffold, landing at ground level and suffering a hairline wrist fracture.",1
"On February 3, 2023, an employee was moving steel stringers when one of them flipped over a stair tread and amputated the tip of the employee's left index finger.",0
"A driver was moving a shipment with a pallet jack inside his trailer. He turned the pallet and began pushing it toward the door to place on the liftgate of the truck. The pallet jack dropped the load, causing the lowering lever to release and impact the employee's right ring fingertip. The fingertip was broken and the fingernail and nailbed were removed.",1
"On February 3, 2023, an employee was placing and adjusting dock plates when his finger was caught on a case of yarn. This prevented the dock plate from extending properly into the trailer, and it pinched and fractured three of the employee's fingers. He was hospitalized, requiring surgery.",1
"An employee was helping a customer at a self-service checkout stand. The employee stepped back, tripped over a basket, and fell to the floor. The employee suffered a broken right hip and was hospitalized, requiring surgery.",1
"An employee was sitting in a chair by the desk. As he adjusted it, it slipped out from under him and he fell on his side/hip. He was hospitalized, having suffered a hip injury.",1
"An employee was pushing six shopping carts from a parking lot toward a store front. A pickup truck ran over his left foot, causing multiple fractures that required surgery.",1
"A crew was tasked with pulling a guy wire down and putting a jumper back online to re-energize a single-phase tap. While the tap was being energized, an employee suffered electrical burns to both hands.",1
"An employee was getting out of a pickup truck to close a gate when the truck started moving in reverse. The employee fell and was run over by the truck, resulting in nine broken ribs and a lower back fracture. She was hospitalized.",1
"An employee was mounting a skid loader. The employee slipped on ice/mud on the loader's tracks, fell, and suffered a broken leg.",1
An employee was cutting a large piece of frozen pork with a meat saw. The sawblade amputated his right index fingertip. He was hospitalized and underwent surgery.,1
An employee tripped and fell over a cabinet's open lower door. She suffered a broken right femur.,1
An employee was using a torque wrench while terminating a cable on or near a 120-volt DC battery. An arc flash from the battery burned the employee's hands.,1
An employee suffered a muscle strain while throwing a bag of trash from a garbage cart into a compactor. The employee was hospitalized.,1
"On February 5, 2023, an employee was shocked while operating an electric forklift. The employee was hospitalized.",1
An employee was loading a trailer when they were caught between the trailer and a piece of material-handling equipment. The employee sustained a hip fracture.,1
"An employee was doing welding work on a cylinder. The cylinder fell from a skid frame. As the employee went to catch it, it partially amputated the bottom of his left middle finger.",1
"An employee was removing a pipe from a rack, the third one up from the floor. He had to stretch to reach the pipe, and his wedding band got caught on the rack. His left ring finger was amputated.",1
"On February 6, 2023, two employees were handling a metal plate that weighed about 3,000 pounds, that was loaded on a trailer. When they lifted the plate up, it slid and crushed an employee's left hand against a 4x4. The injury resulted in amputation.",1
"An employee was painting a motor. His right hand became entangled by moving parts in the gearbox, and he suffered amputations to the middle, ring, and little fingers.",1
"An employee was doing plumbing work while standing on the second step of a 4-foot ladder. The employee fell to the floor, resulting in a neck injury and concussion.",1
"On February 6, 2023, a rubber strip mill operator was adjusting a pie blade assembly when his left index finger was amputated at the first knuckle.",0
"An employee was installing concrete pavers on a sidewalk. A vehicle drove onto the sidewalk and struck the employee, who suffered a broken wrist and was hospitalized.",1
"A temporary employee was sweeping the stairs at an apartment complex when she slipped, landed on her left leg, and rolled down four steps. She suffered a broken left foot and was hospitalized.",1
An employee was using a forklift to move a unit of lumber. He was adjusting the lumber to set it down on a small wooden dryer. The load was a few inches off the ground when it shifted and came down on his right index finger. He suffered an amputation to the fingertip.,0
An employee was unloading grain from a semi truck. The employee was using a pry bar to loosen the grain in a downspout when the bar slipped and amputated the employee's left ring fingertip.,0
"An employee was operating a brake press. The machine cycled and crushed his right middle finger, amputating the tip. The machine was guarded at the time.",0
"On February 6, 2023, at approximately 5:00 p.m., an employee was inspecting a hoist. While the employee was conducting the wire rope inspection, his glove was caught on the wire and his finger was pulled into the pinch point between the drum and wire. The employee suffered an amputation of his left index fingertip.",0
"An employee had removed the piping from a three-way actuator valve to inspect the valve for a possible clog or jam. The valve cycled while the employee's right index finger was inside the equipment, causing an amputation to the fingertip.",1
"An employee was moving packages from a line. An irregular metal package with nylon mesh on it came down the slide and crushed the employee's finger, causing a partial amputation including the loss of the nail.",0
"An employee fell from the top of a 6-foot heater onto the floor of a 3-foot trailer and then onto the ground, suffering fractures to the right lower leg, collarbone, and skull and briefly losing consciousness.",1
"An employee was preparing to remove concrete barriers from molds using a spreader bar that would be attached to a crane. The rigging attached to the spreader bar became caught on a small rebar hook that was welded to the center of the spreader bar. When the employee began to move the spreader bar, it fell sideways, striking the employee and causing a closed fracture of the right tibia.",1
"An employee tripped and fell, hitting her head on a doorframe and suffering a laceration to her forehead and scalp.",1
"An employee connected a hose to the valve connector on a mini-tote. As the employee was turning the handle of the valve to allow potassium thiosulfate fertilizer to flow through the hose, the connection burst from a suspected chemical reaction between the fertilizer and an unknown substance. The valve broke into pieces and the fertilizer spilled, causing chemical burns to the employee's eyes and right wrist. The employee also sustained a displaced fracture to a finger.",1
"Maintenance employees were replacing a gear box in the stacker of a press. After the replacement was complete, the stacker was restarted. The maintenance employees then heard a loud noise coming from the drive chain area and the injured employee went to check the chain tension when the machine amputated his right index fingertip.",0
An employee was working on a machine that bends sheet metal and lacerated their right index finger. The finger was amputated.,1
An employee was closing a fryer lid. The closing valve caught her right index finger and amputated the tip.,0
An employee fell while changing paper towels in a bathroom. She suffered a broken hip.,1
"An employee slipped in a parking lot and fell to the ground, suffering a head laceration and a concussion.",1
"On February 6, 2023, an employee was working on a line, putting lids on pails of shortening. The employee noticed that a lid was not positioned properly on a pail. As the employee tried to straighten the lid, the lid press came down; the employee's left thumb was caught between the lid and the press. The employee suffered an open fracture of the last joint of the thumb, a nail avulsion, and a partial amputation.",1
"An employee was unloading fluid from a truck into a container. The line, under pressure, released fluid, causing the employee to jump back and trip on a forklift. The employee suffered a broken right hip and wrist.",1
"An employee was standing at a repair bay when a bus, backing up, struck the left part of his body. He suffered fractures to vertebrae and a hip.",1
"An employee was spotting a forklift as it moved structural steel beams at a construction site. The forklift set two of the beams down on cribbing. The employee was separating the beams when one of them shifted; the employee's right middle finger was caught between the two flanges on the beam, and the fingertip was amputated.",1
"An employee fell 15-20 feet from a roof onto a tennis court, suffering broken ribs.",1
"On February 6, 2023, an employee slipped on a newly washed floor and fell, suffering a broken left kneecap. She was hospitalized.",1
"An employe was using a torque gun while installing a pipe sleeve. The guard of the torque gun caught his finger, causing a fingertip amputation.",0
"An employee was using a brake press to bend a part. The machine cycled and came down onto both of the employee's arms, crushing them.",1
An employee suffered an ankle injury while using a powered utility cart.,1
"An employee lost his balance while climbing down a ladder, fell to the concrete ground, and suffered a broken left tibia.",1
"An employee was driving a standing electric pallet jack out of a truck trailer. A wheel on the pallet jack had gone flat, and it became stuck on the dock plate. The employee fell off the pallet jack onto the dock plate, suffering a broken left femur.",1
An employee was performing preventive maintenance on a skinning machine. The machine caught the employee's left index finger and amputated it at the second knuckle.,0
"An employee was repairing an HVAC cooler system above the ceiling tiles. The employee fell approximately 10 feet through the ceiling to the floor below, resulting in back fractures and a hand injury.",1
"An employee was dismounting a ski lift. The employee was caught on the ramp and twisted their leg, resulting in a dislocated hip.",1
"An employee was helping repair a stuck feed line. His right middle finger was caught by the feed line gear motor and chain, causing the amputation of the fingertip. The machine was guarded at the time.",1
"An employee was observing push cables move through segments to ensure that they did not get caught. When a cable became caught, the employee grabbed the cable and the rotation pulled his hand between the cable and rebar. The employee sustained an amputation of the right index fingertip that required hospitalization and surgery.",1
"An employee was standing on a trailer. The trailer moved and the employee fell off the trailer to the ground, resulting in a fractured left leg.",1
"An employee was walking near the front of a planer machine. The employee was caught between a wood board and the end of the machine, suffering an injury to the left side of the abdomen just above the belt line.",1
An employee was descending a platform ladder with a case of product. She fell at the second step from the bottom and her left heel struck the floor about 20 inches below. She sustained a left heel fracture that required surgery.,1
"An employee was cleaning a single-facer machine. The employee's fingertips were crushed between rollers in the machine. The employee was hospitalized, and the fingertips were medically amputated.",1
An employee was shocked while disconnecting a ceiling light. He suffered burns to a finger on his right hand and was hospitalized.,1
"An employee was helping another driver lift a keg from off a truck. The keg fell, crushing the employee's left hand between the keg and the concrete floor. The employee was hospitalized with a fracture and contusions to their left hand.",1
An employee was walking down the stairs of a parking garage to enter the hospital when she tripped and struck multiple steps. The employee sustained a right tibia fracture.,1
"An employee was repairing an overhead bridge crane using a boom lift. When maneuvering the boom lift in position between the crane girders, the employee's hand that was resting on the basket was caught against the crane. The employee sustained an amputation of half an inch of his little finger.",1
"An employee was repairing a conveyor sprocket when the chain moved and pinched his fingers. His middle, ring, and little fingertips were amputated.",0
"An employee was operating an automated hydraulic forge press. His right hand was caught between the die and the pipe it was forming, resulting in the amputation of four fingers.",0
"An employee slipped on an icy roof surface and fell to the ground, sustaining a possible leg fracture.",1
"An employee was sanding an icy walkway. Upon picking up the bucket of sand, the employee sustained a hernia that required surgery.",1
"A temporary employee was operating a threading machine. When he unclamped a threaded bar, the machine began turning the bar and his right glove was caught resulting in amputation of the middle fingertip.",0
An employee was leaning over their desk when they fell onto the desk and sustained an arm fracture.,1
"An employee was using a clutch spreader tool during a training activity. When he applied pressure to the tool to release belt pressure, his left index finger came in contact with a spring sheave roller. The finger was amputated just below the nail.",0
"A crew was building a scaffold inside a furnace. An employee was stabilizing the mudsill and jack as a 10-foot scaffold leg was being connected. The scaffold leg came in contact with the furnace wall, causing a piece of refractory brick to fall. It struck the right side of the employee's mid-back, causing a contusion.",1
"An employee was packing up his equipment to head to another jobsite. As he picked up a circular saw, the employee sustained a laceration above the knee caused by the saw.",1
An employee was welding flux core stainless steel inside a structure. He was overcome by the fumes and became ill. He was hospitalized.,1
"An employee tripped and fell to the floor, suffering a broken right femur. She was hospitalized.",1
An employee was opening and closing the drill bit of a cordless drill. The tool activated and caught the employee's right glove. The employee suffered an injury to the right hand that necessitated the medical amputation of the employee's right little fingertip.,0
"An employee was walking a two-wheeler of product toward a store. He slipped on ice and fell. The handle of the two-wheeler landed on his finger, amputating the tip.",0
"An employee was testing a pipe at an oil/well site. The pipe moved and caught his finger, causing the amputation of the fingertip.",1
"An employee had just finished backing his trailer into the dock and opened the trailer doors when pallets fell on top of him. The employee sustained contusions, an arm fracture, and swollen jaw.",1
"Employees had just finished running a metal culvert pipe. After making the culvert, the pipe is cut loose from the corrugation mill and is then cut manually by pipe wrenches. When the cut was completed, the employees were heading back to the mill area and the table started to dump. The culvert pipe fell on the employee, resulting in a broken left arm.",1
"On February 8, 2023, an employee was disposing of trash in the dumpster. The storage yard gate closed behind the employee and he went to re-open it from the backside, causing his arm to become caught in the gate slats. The employee sustained a right forearm fracture and was hospitalized.",1
"On February 8, 2023, two employees were installing a cascade attachment (with four thin forks that extended out and could pull together to form two forks) on a forklift. After fixing the installation of the hoses on the forklift, the employees were checking to ensure that they would not be pinched when the attachment was activated. While one of them was checking the placement of the hoses, the attachment was activated. The forks pulled together and crushed his right ring finger, causing a laceration to the second knuckle; the fingertip was medically amputated.",0
"An employee had been operating a loader. When he began exiting the loader, he slipped and fell approximately 5 feet to the ground. The employee sustained a punctured lung and fractures to the collar bone, sternum, and ribs.",1
"An employee was repairing and modifying a door that was placed on a sawhorse. The employee was cutting through the door using a circular saw with his left hand and holding underneath the door for support with his right hand. The employee sustained lacerations to the ring, middle, and index fingers and his little finger was amputated.",1
An employee was cleaning a production line when they sustained a right index finger amputation.,0
An employee's hand was crushed in a panel machine during maintenance. The employee was hospitalized and required surgery. The machine was not guarded at the time and was possibly not locked out/tagged out as well.,1
"The injured employee was about 15 feet high on a reach truck, pulling product, when another reach truck struck the injured employee's reach truck, causing the injured employee to fall to the concrete ground. The injured employee sustained a fractured right leg and swollen left ankle.",1
An employee was delivering packages in a residential area when they slipped on a step and landed on their lower back. The employee sustained injuries to the left kidney and back.,1
An employee was on a ladder placing an animal trap in the ceiling when he fell off the ladder onto the ground and broke his right wrist or arm.,1
An employee was stacking and banding groups of pipe braces on a forklift so they could then be loaded onto trucks for transport. Each brace was 42 feet long and about 550 pounds. The 4-foot stack fell from the forklift forks and the employee was struck by several pipe braces resulting in a fracture to the lower right leg and a hernia.,1
Two employees were driving forklifts that collided. One of the employees' left foot was caught between the forklifts.,1
"An employee was walking down the engine assembly line. As the employee walked between two electric tugger carts, he tripped on the tongue of a cart and fell, resulting in a left hip fracture that required surgery.",1
"On February 8, 2023, an employee was carrying a door in the millwork department when the door fell on his right foot. The employee's big toe was fractured, requiring hospitalization and surgery.",1
"An employee was polishing a rail using a finishing pulley with a polishing belt, which was attached to a disc grinder. The belt slipped, and the wheel lacerated the employee's left knee.",1
An employee was climbing up the ladder to paint trim when the ladder kicked backward. The employee fell and sustained a spine fracture.,1
"An employee was loading/unloading produce at the site. As the liftgate was rising, the tip of his left middle finger was caught between the liftgate and the truck when the platform met the truck deck. The employee sustained a left middle fingertip amputation.",0
"An employee was bit by a cat, resulting in four puncture wounds to the right thumb. The employee experiencing joint swelling and red streaking on the skin and was hospitalized.",1
"An employee was removing a metal structure used to hold conduit in place during a demolition task. When the material was cut loose, the heavy end of the metal frame swung around and struck the bottom of the ladder the employee was standing on. The ladder was knocked over and the employee fell to the floor from the second step, resulting in a left femur fracture.",1
"An employee was fabricating a plate for a hydraulic cylinder. The cylinder actuated and pinched the employee's fingertip, resulting in an amputation.",0
"On February 8, 2023, at 9:15 AM, an employee was operating a saw in the gateway department. While the employee was clearing debris, the machine pushed new material forward for processing, catching the employee's right thumb. The employee sustained a partial amputation.",0
"Two employees were loading full barrels onto a pallet by hand. While moving a barrel, the injured employee's finger became pinched between barrels, resulting in a fingertip amputation.",0
"On February 8, 2023, an employee was using a carpentry table saw to cut wooden 2-by-4s. The sawblade caught fibers on the wood and kicked the wood back toward the employee, who tried to stabilize it. The unguarded sawblade then struck the employee's left hand, amputating a fingertip just below the nail. The employee was hospitalized.",1
"An employee was driving a dump truck up a slight grade. The truck tipped backward and the front wheels of the truck rose off the ground. The tipping resulted in the load (10 steel blooms) to become dislodged from the bed of dump truck. The front of the truck then fell back to the ground, causing the employee to strike their head against the steering wheel and sustain facial injuries.",1
An employee was applying lubricant to a chain when three of his fingertips became caught in the chain.,1
"A temporary employee entered the elevator to go down and it began descending rapidly. The emergency system caused the elevator to stop suddenly, and the employee sustained a left leg fracture and strained back.",1
"On February 8, 2023, a team in the molding department was processing a 240-ton axle mold. The cope of the mold was rigged with lifting chains, hoisted off of the pattern, and set on two wooden blocks. As the employee unhooked the chains, the flask on the blocks rocked, causing the employee's foot to become pinched. Three toes were amputated.",1
"An employee was using a manual metal brake when his hand was caught on the handle, causing his hand/finger to become pinched near the brake shear. The employee sustained an amputation of the right ring fingertip.",0
An employee was cleaning out a machine that sorts seeds when the machine fell over and knocked him down. He was hospitalized for upper torso injuries.,1
"An employee was using a band saw to cut frozen meat when his hand slipped and contacted the saw, resulting in an amputation to the left index finger.",1
"An employee was driving a reach truck out of the parking area when the vehicle veered into a guardrail. The employee's foot was crushed between the vehicle and the guardrail, resulting in foot injuries that required surgery.",1
A saw technician was clearing jammed plastic sheets from a roller table when the stacker carriage was activated and struck them. The employee sustained broken ribs and a collapsed lung.,1
An employee was providing pest management services to the exterior of a bank. While walking through the parking lot he was struck by a vehicle. The employee was hospitalized with a broken right leg and required surgery.,1
An employee was monitoring paperwork in an office when they were exposed to dust from concrete grinding and chipping. The employee sustained fungal pneumonia.,1
An employee was hammering exposed nails on pallets. The employee pushed a pallet down the conveyor line with his right hand. His left middle and ring fingers were pulled into the conveyor chain and crushed.,1
An employee had been installing racking. He was stepping onto one of the racks from a ladder when he fell approximately 68 inches to the concrete floor. The employee sustained a fractured left humerus.,1
"An employee was moving casing from the rack to the casing handling system on the rig. The tiering arm scoped out too far and came apart, causing a piece of casing to fall on the employee's leg. They sustained a broken right tibia.",1
"An employee was on the catwalk of a garbage truck putting a tarp over the load. He fell off the truck, landing on the ground and suffering broken ribs, a cracked cheekbone, a broken wrist, and a punctured lung.",1
"An employee was manually clearing a jam in the planer machine when the roller advanced and pinched the employee's right index and middle fingertips between the roller and the lumber board, resulting in amputations below the first knuckles.",0
An employee was working in the garden center when a forklift turned and ran over the employee's foot. The employee was hospitalized for severe pain and swelling of the foot.,1
An employee was standing in the corner of the building when a forklift backed over the employee. The employee sustained an amputation.,1
"An employee was operating a forklift and went to grab a hold of the swinging arm to swing it into place. His hand was caught between the forklift and the swing arm, resulting in a middle finger amputation.",1
"An employee was making adjustments to a core machine when the hopper struck the employee's right hand, resulting in amputation of the right thumb.",0
An employee was operating a slicer in the kitchen and lacerated their thumb. The employee sustained an amputation.,0
An employee was walking to her bus when she fell to the ground and sustained rib fractures and a head injury. The employee was hospitalized.,1
An employee was walking into the breakroom when she tripped on the carpet/coffee table leg and fell to the tile floor. The employee sustained a right orbital fracture.,1
An employee was cutting firewood with a chainsaw. The chain came off the saw and lacerated the employee's left ankle.,1
"An employee was walking toward the oven in the smoking department when they slipped and fell, resulting in a left hip fracture.",1
"On February 9, 2023, an employee was using an overhead crane to remove a bundle of ½” cold finish rounds (steel bars) from a vertical storage pan to place the bundle on a work table for packaging and shipment. The storage pan was on the forks of a forklift parked near the work table. The end of the bundle was raised approximately 3 feet above the pan when the chain slipped off allowing the bundle to fall back into the pan. This caused the pan and bundle to fall off the forklift. The edge of the pan scraped down his shin and landed on his left foot. The employee was hospitalized with a broken foot.",1
"Two employees were cleaning the ducts on top of a pipe. The pipe gave way and the employees and the pipe fell 15 feet. The pipe landed on one employee's leg, resulting in a fracture in three places and hospitalization. The other employee was not injured.",1
An employee was participating in training tasks with a crane. The injured employee hooked a steel beam to the crane and lifted it. During the lift the beam swung sideways and the employee's legs were crushed between the other beams that were stacked.,1
"A tree fell on an employee, resulting in a neck fracture and forehead laceration.",1
"An employee was on a roof taking photos of the previously installed solar panels when he lost his footing and fell. The employee sustained three vertebrae fractures, bruised lungs, and lacerations and scrapes.",1
"An employee was using a tape machine to close boxes. The machine's handle became stuck as she was pulling it, then returned quickly and struck her left hand slightly above the wrist.",1
"An employee was using a table saw to cut a piece of wood when the wood became jammed. As the employee went to move the wood, his right index finger was lacerated by the blade. The employee was hospitalized.",1
"On February 9, 2023, at 12:30 PM, an employee was making trips back and forth in a parking lot to make deliveries when he slipped and fell hitting his head on the parking lot surface. The employee was hospitalized with a fractured skull and brain bleed.",1
"An employee was operating a steam hammer when a piece of metal was expelled from the equipment and struck the employee, knocking him to the ground. The employee sustained an abdominal injury.",1
"An employee was bending a 7-foot piece of rebar on a cutter/bender machine. While holding the long end of the rebar down, the employee's hand was caught between the moving rest and the rebar, resulting in a right index finger amputation at the first joint.",0
"On February 10, 2023, an employee was performing a post trip inspection of their trailer when they slipped on ice and fell on the ground. The employee landed on their head and sustained a concussion.",1
An employee was walking on the roof of a home. The building was covered by a tarp for insect fumigation. The employee slid down the side of the tarp to the ground and struck his head.,1
"An employee moved three pieces of material (weighing 290 pounds each) with a 5-ton overhead gantry crane, using a choker hitch. He then started the lowering process to place the load on top of a wooden dunnage board that was on the floor. His left hand was in between the material when the material buckled inward, crushing and amputating his left middle fingertip.",0
"An employee was using a hand router when it kicked back and caught the employee's left little finger, resulting in a partial amputation.",0
"The employee was entering a tank on a vessel through a manhole on the main deck via a fixed ladder. While attempting to lean against the coaming to adjust his grip on the ladder, he fell into the tank, striking against temporary scaffolding. The employee sustained rib fractures.",1
"An employee was delivering a water bottle filling station to a customer site. After lowering the product down to ground level using the lift gate, he stepped off the back of the box truck and fell, landing on the lift gate. The employee sustained a right hip fracture.",1
An employee was moving a scissor lift table. He was reaching to disconnect the table's air hose when the table came down on this arm and broke it. A block was not in place to prevent the table from descending onto his arm.,1
"A temporary employee was performing tasks on the cold scale when a beef carcass became lodged on the peroxyacetic acid wash cabinet as it moved down the automated line. As the employee dislodged the carcass from cabinet, his hand became caught between the carcass and the cabinet, resulting in amputation of the little fingertip.",0
"An employee had been moving masonry blocks. A scaffold plank displaced and the employee fell from the scaffold to a lower level, sustaining a compound fracture to the right ankle.",1
An employee was working in the freezer storage space of a warehouse throughout the evening when they sustained frostbite of the fingers.,1
"An employee was on a row of box culverts clearing some material that was in front of the trench box spreader bars. The employee then crossed over the spreader bars while an excavator was pulling the slack out of the cables attached to each side of the trench box. The cables became taut and pulled the trench box forward, catching the injured employee's left foot between the top of the concrete box and the lower spreader bar. The spreader bar then slid on top of the injured employee's left foot, resulting in a left foot/toe injury that required surgery.",1
An employee sustained an amputation while working with a press.,0
An employee was transferring the contents from a tank into the filter press when he was struck in the nose by a piece of the hydraulic pump handle or the swivel piece. The employee then fell to the floor. The employee was hospitalized for a nose laceration as well as head and neck pain.,1
"An employee was climbing on the load on a tractor trailer to secure loose pieces of material. He fell about 10-12 feet, landing on the ground and suffering a broken elbow.",1
"An employee was disconnecting a farm implement. An adjustment bracket (part of the implement) dropped onto the employee's left thumb, amputating it.",0
"An employee was descending a fixed ladder in a littoral combat ship (LCS) when they slipped and fell 2 to 6 feet to the bottom, resulting in a compound fracture and hospitalization.",1
An employee was operating a food-preparation block grinder when they sustained a partial amputation of the right little finger.,0
"An employee was driving a utility vehicle when it tipped over. The employee sustained a left ear laceration, a headache, teeth and tailbone injuries, and blunt force trauma.",1
"While working at a fueling station, an employee was inside an underground sump hole with safety cones blocking off the area. He stood up in preparation to get out of the hole when a truck drove over the hole. The wheel of the vehicle was stuck in the hole and trapped the employee against the inside of the hole, putting pressure on the employee's upper torso.",1
"An employee was operating a block machine. The mold head of the machine clamped down on the employee's arm, resulting in a humerus fracture and a dislocated elbow.",1
"An employee was setting up a frame and tool handle in an injection molding machine when the machine pressed parts together. The employee's left middle finger was caught between the frame and handle of the tool being manufactured, and the top of the finger was amputated.",1
An employee was exiting a bulldozer when the wind blew the door closed on the employee's little finger resulting in a fingertip amputation.,0
An employee was exiting a truck when they fell and sustained a head laceration that required stitches as well as a concussion.,1
An employee was cutting ribeye meat with a band saw and amputated his left index fingertip.,1
"An employee was on an 8-foot ladder when he fell from the fourth step to the ground, landing on his right hip. The employee was hospitalized with a hip injury.",1
"An employee was moving the die onto the press head when the foot pedal was bumped and the employee's right hand was caught between the press and the die, resulting in open fractures to the  middle, ring, and little fingers.",1
"On February 11, 2023, a ground equipment maintenance technician was working to resolve an issue in the cold bag storage area on the concourse at an airport. He was moving between two conveyors when the toe of the employee's shoe caught on the lip of the equipment, causing the employee to lose balance and fall. The employee sustained fractures to the left tibia and fibula.",1
An employee was cleaning floors with a floor scrubber when he slipped on the water that was left behind from the cleaning process. The employee fell and hit his head on the floor and also injured his left side.,1
"Employees had been working on a rooftop to install the underlayment. When the job was finished and employees were getting down from the roof, the injured employee reached for the ladder but lost balance and fell to the ground. He sustained an open fracture to the right wrist.",1
"An employee was unloading items off a pallet. The employee turned and began to walk when they tripped over the pallet and fell onto the floor of the semi trailer, resulting in a left shoulder fracture.",1
"An employee was riding a horse to sort cattle in a pen. A calf moved past him and the employee tried to stop the calf with his horse. The horse veered into the fence post, crushing the employee's leg. The employee sustained a laceration and fracture to the lower leg.",1
"An employee was setting up a tilt wall and using a spud wrench to control the spacing between panels. A panel separated momentarily, allowing his hand and wrench to slip. His right thumb was then caught between the panel and wrench, resulting in a right thumb tip amputation",1
"An employee was preparing to move a 75-foot pipe. The employee used a pipe bar tool to grab the pipe with two prongs on the lip of the pipe, then began to move the pipe. The employee's fingers were pinched between the pipe bar and another, adjacent pipe. The employee's fingertip was surgically amputated.",0
An employee was hammering when they were struck in the eye by a nail.,1
"An employee was working from a ladder, performing a cable installation. The employee fell from the ladder to the ground about 10 feet below and suffered a broken right tibia.",1
"Two employees walked to a storage area to retrieve some parts. The injured employee's finger was caught in the sliding door latch, resulting in an amputation to the index finger.",0
An employee was cutting pork with a meat saw and amputated his left middle fingertip.,1
Two ski patrol employees were skiing down a mountain. One of them caught the edge of his ski and fell and struck his head on the ground. He was hospitalized.,1
"An employee was performing maintenance on a scissor lift by aligning a bolt on a part suspended by hoist; the base part of the lift was on the worktable. The part would not align properly and the employee went to see what was caught. The material freed and pinched their left index finger between the two parts, causing an amputation of the fingertip.",1
An employee was sitting in a chair when the chair rolled out from under her as she bent forward. The employee fell to the floor and suffered a back injury that required hospitalization.,1
An employee was loosening bolts on a wellhead when they slipped and fell backward approximately 8 feet through an area that was missing floor plates. The employee landed on his back on the ground and sustained a T-12 vertebra fracture that required hospitalization and surgery.,1
"An employee was preparing to move a rig. The employee was on top of the top drive, unlatching the block, when their left little fingertip was amputated.",1
"An employee was cleaning the hood system on a grease fryer. The employee's foot slipped into the fryer, resulting in burns from the hot grease. The employee was hospitalized and had surgery.",1
An employee was operating a bagger cutting machine and suffered an amputation to a finger. The machine was guarded at the time.,1
"An employee was cutting communication lines with a handheld low-speed band saw. The blade lacerated the top of his left wrist, damaging a ligament.",1
"An employee was unlashing (loosening chains) military vehicles on rail cars prior to offloading. As he stepped off the railcar and onto the ground, he twisted his left ankle in loose gravel alongside the rail track. He required surgery for a dislocated ankle.",1
An employee was in the vestibule of the store when they were assaulted by two unknown males and stabbed with a knife. The employee sustained stab wounds to the left leg and abdomen area.,1
An employee was cutting a beef shank on a meat band saw and sustained a partial amputation of the left side of his left thumb tip.,1
"An employee was on a ladder to a roof when they fell, resulting in multiple bone fractures and brain swelling that required surgery.",1
"An employee was moving a casting with a sling and a crane. While setting and stabilizing the casting, the employee's thumb was pinched between the chain and casting, resulting in a laceration and fracture that required surgery.",1
"An employee was replacing a fuel pump on a pickup truck using a transmission jack to lower the fuel tank from the vehicle. When he removed and lowered the tank, the tank caught fire, resulting in burns to his hands, arms, and legs.",1
"An employee was reading the numbers on the racks to find a skid that needed to be transported. As the employee was walking along the rack, they came in contact with a skid of glass. The employee's left forearm was lacerated.",1
An employee was loading a tractor trailer with a pallet jack when they fell from the trailer lift gate to the ground. The employee sustained a head laceration.,1
"An employee was loading a forklift with a 7,500-pound steel rod using an overhead crane. As the employee set the rod on the forks, the rod began to roll forward. The employee placed his foot at the end of the forks to stop it from rolling off when the steel rod rolled onto the employee's foot, resulting in five right toe fractures.",1
An employee was walking into a room when they were struck by the opening door. The employee fell to the floor and sustained a right hip fracture.,1
"An employee was walking down a hallway when their right foot slipped on the floor. The employee attempted to break their fall by grabbing a doorhandle to their left with their right hand. The employee then spun around and landed on their right side, resulting in back pain.",1
"A driver was exiting a van when he slipped and fell, striking his head and right shoulder on the ground.",1
An employee sat on the lid of a septic tank and the lid broke causing the employee to fall into the tank and hit their head. The employee sustained a brain bleed and a head laceration. The employee was hospitalized.,1
An employee was operating a de-nester machine that orientates pallets as they move on to the assembly line. The employee was manually loading a pallet onto the elevator that brings the pallet to the next level. The elevator engaged and his hand was crushed between the pallet and the elevator as it lifted. The employee was hospitalized with injuries to the right hand including broken bones.,1
"An employee was carrying a pot of water to a coffee pot in an office. She tripped over a box in the middle of the floor, fell, and landed on her left shoulder. She suffered a broken humerus.",1
An employee was walking from the car to get to work when they were struck by a motor vehicle on an access road. The employee sustained a left ankle fracture and head bruising.,1
"An employee was getting a piece of equipment from behind a stockpile of steel I-beams when a steel beam became dislodged and fell, crushing the employee's right leg and foot.",1
"An employee was jogging bags on a form fill and seal machine when a bag became stuck. The employee opened the jaws of the unit to remove the bags. When placing the bags back on the jaws, the jog button was pressed, causing the machine to clamp onto the employee's finger. They sustained a left index fingertip amputation.",0
"An employee was working on the PVC shrink sleeve cutting machine. While clearing plastic sleeves from the machine, the employee's right index finger was amputated at the first knuckle.",1
"An employee was operating a 3-wheeled powered industrial truck to load scrap metal onto a trailer. As they positioned the vehicle to pick up the next piece of scrap metal, the vehicle swung into the bumper of the trailer, pinning the employee's right foot to the side of the trailer. The employee sustained a right foot fracture.",1
An employee was escorting construction workers while standing at the top of the steps. The employee fell down the stairs to the pavement and sustained a head injury that rendered them unconscious.,1
"On February 13, 2023, an employee was operating a reach truck to select an order for a customer and struck a rack. The employee sustained a lower back and pelvic injury.",1
An employee was on top of railcars while they were loaded with wheat. The employee then experienced difficulty breathing and was hospitalized.,1
"An employee was performing manufacturing tasks when the product collapsed inside of the steel tube of a mandrel. The employee then began removing the defective product. While the employee manually rotated the mandrel, their left middle finger was pinched between the mandrel and the positioning saddle on the underside of the mandrel, resulting in a fingertip amputation.",0
"An employee was rearranging an office space. Upon moving a wheeled bucket, the employee injured their back from a twisting motion and was hospitalized.",1
An employee was leaving the recycle room with an electric pallet jack while walking behind the pallet jack. The employee pushed open the swinging doors with the pallet jack when their hand was struck and pinched between the door and the pallet jack handle. The employee's fingertip was amputated.,0
An employee was removing the internal trim from a skylight when they lost their footing and fell 8 feet off an A-frame ladder. The employee landed on the floor and sustained a right calcaneus fracture.,1
"An employee was picking up a metal beam with a crane when the beam came loose from the clamp and fell, pinning the employee to the ground.",1
"An employee was removing a food tray from the oven when a meatball fell onto the ground. As the employee reached to pick it up, she slipped on the meatball and struck her hand on the counter and head on the floor. The employee was hospitalized for a hand fracture and syncope.",1
"An employee was pulling a cart loaded with plants toward the shipping area. While moving backward, her right middle finger became caught in a groove between her cart and a parked cart, resulting in amputation of the fingertip.",0
"An employee was loading two pallets of water onto a pickup truck. The tow straps became stuck and the employee climbed onto the truck. They lost their footing and fell to the ground, resulting in two rib fractures.",1
"On February 13, 2023, an employee was walking to a different area on a level surface, when they got caught on webbing, tripped, and fell to the floor. The employee sustained a right femur fracture.",1
An employee was closing the back door of his truck when several of the top panels of the door came off the hinges. He went to catch the panels and his left little finger was caught between the falling panel and the side wall of the truck resulting in a fingertip amputation.,1
"An employee was servicing equipment when a mine launcher assembly rack fell over and struck the employee, resulting in lacerations to the right arm and leg.",1
"Employees were constructing a new refinery structure that is delivered to the site in sections referred to as modules. The modules consist of steel beams that are connected together and are then placed and connected to the overall structure. As the injured employee was placing a 86,000-pound module that was connected to a crane, the structural steel module moved into place. The employee's forearm was caught between the structure and the module, resulting in an avulsion and contusion.",1
An employee was traveling on a walkie-rider. He pushed the brake down and was ejected from the walkie-rider. He impacted the ground and sustained a fractured pelvis.,1
"The injured employee was working with two other individuals on a V-shaped roof to repair exhaust fan ductwork. The injured employee walked backward up the roof to confirm alignment of an exhaust vent and stepped off the edge of the roof, landing 14.5 feet below onto the next roof level. He landed on his feet, then fell backward, striking his head on a window. The injured employee was hospitalized with a fractured right ankle. Fall protection was not worn at the time.",1
"An employee was operating a utility task vehicle when it began tipping over. The employee's left leg was crushed between the vehicle and the ground, resulting in a tibia and fibula fracture.",1
"An employee was walking to his vehicle when he noticed an ordnance device laying on top of an orange K-rail barricade in the parking lot. He went to move the device to the ground and it fell on his right foot, crushing and lacerating his foot and toe.",1
"An employee was working on a forming machine, adjusting part of the machine that holds the mold. He then went to check the temperature with a handheld electronic probe. While checking the temperature, the hanger that was holding the mold opened and pinched the employee's finger between the mold hanger and the end tight deflection bracketing. The fingertip was partially amputated.",0
"An employee was working at a plant when a latch plate controlling an arm flipped. The arm came down and struck the employee's left hand, resulting in the partial amputation of the middle, ring, and little fingers.",0
An employee had been gathering supplies. A train passed by the workshop causing a ladder to fall and strike the employee on the head. The employee was hospitalized with a head injury.,1
"An employee was pumping milk from a tank into a trailer. The employee was closing a valve on the milk trailer when it forcefully shut around his right middle finger, resulting in a partial amputation.",1
An employee was standing on a flatbed truck loading scaffold parts onto a forklift. Several scaffold frames came loose and fell on the employee’s right leg. The employee was hospitalized with a fractured leg.,1
An employee was hospitalized for a back injury after pulling products off a shelf and loading them onto a pallet.,1
An employee was descending a ladder when he fell to the ground below. The employee sustained a dislocated shoulder and potential internal injuries.,1
"An employee was preparing a stamping die that was removed from the press for transport back to the maintenance shop. While lowering it by hoist onto a die cart, the tip of his left little finger became pinched between the die and the cart table, resulting in a fingertip amputation.",1
An employee was on an 8-foot step ladder installing drywall in an HVAC shaft of a hotel under construction. The ladder kicked out and the employee fell through a duct chase. He was hospitalized with fractured vertebrae and a fractured heel.,1
"An employee was operating a forklift on a construction site when the forklift tipped forward. The cage struck the employee's arms, resulting in fractures to both upper arms.",1
An employee was on a tricycle in the plant when the seat broke off. The employee grabbed at the handle bars and the tricycle tipped over backward. The employee struck their head on the concrete floor and sustained a fractured skull and concussion requiring hospitalization.,1
"An employee was on top of a rail car inspecting the grain. As the employee climbed down the rail car ladder, they slipped and fell to the ground below, resulting in a left leg laceration.",1
"An employee was standing at ground level next to the loading dock that had a manual docking plate attached. As the docking plate was opening, the employee's finger was caught in the mechanism, resulting in a partial amputation of the left middle finger.",1
"On February 14, 2023, an employee was using a power saw to cut a cross-support for a shutter when the support piece became wedged between the saw guide fence and the saw blade, causing their left thumb tip to contact the blade. The employee suffered a laceration, resulting in an amputation that was surgically reattached.",0
An employee was performing tuckpointing while on a swing-stage scaffold. The rope on the scaffold broke and the side of the scaffold fell 20 feet to the ground. The employee impacted the ground and sustained a broken ankle that required hospitalization and surgery.,1
"An employee was operating an electric pallet jack. As the vehicle was turning, it collided with pallets on another moving pallet jack, causing the employee's leg to become pinned between their pallet jack and the pallets on the other vehicle. The employee was hospitalized.",1
An employee was mixing grout with a battery-powered drill when his glove was caught on the mixing pole and his right thumb was amputated.,1
"An employee was walking to the back room of a grocery store when she slipped on a liquid and fell to the floor, sustaining a right patella fracture. The employee was hospitalized.",1
"An employee stepped on a scaffold platform that did not have support and fell 19.5 feet to the floor. The employee's right ankle was fractured, requiring hospitalization and surgery.",1
"An employee was using a table saw when they sustained a fracture, nail avulsion, and partial amputation of their right thumb.",0
"An employee was using a table saw when their left thumb, little finger, and ring finger were amputated to the knuckle. The employee also sustained lacerations on their left middle and index fingers.",0
An employee was performing an accumulator replacement inside a wind turbine when their right little finger was caught underneath the turbine. The employee's right little finger was partially amputated.,0
"An employee was pushing electrical conduit through the eave of the house for solar circuits when their ladder moved, causing the employee to fall 15 to 20 feet to the ground. The employee sustained fractures to the nose, a tooth, and two thoracic vertebrae as well as an injury that required stitches on the face.",1
An employee was tearing a roof off when they walked onto a nail and sustained sepsis and blood clots in the left foot.,1
An employee loaded a pallet with packaged product and was preparing to put it on a conveyor when their right index finger was caught between the manual conveyor rollers and the pallet. The employee sustained a right index fingertip amputation.,0
"An employee was unloading a trailer using a manual pallet jack. As the employee pulled a pallet out of the trailer while walking backwards, the pallet jack ran over his left big toe, resulting in a fracture.",1
"An employee was helping to move a piece of equipment when a chute fell and landed on the employee's right middle finger, resulting in a partial amputation.",0
An employee was retrieving merchandise from the stockroom when they sustained a back injury.,1
"An employee was walking down the stairs while carrying a heavy box when they slipped and fell, resulting in a femur fracture.",1
"An employee was grinding a part. They used a hoist to lift and reposition the part when it slipped off the hoist and fell onto the employee's right index finger, resulting in a fingertip amputation.",0
"On February 15, 2023, at approximately 5:15 p.m., an employee laid her head down on a desk and then noticed that her face and tongue were swollen. She later had trouble breathing while driving home. The employee was hospitalized for a potential allergic reaction.",1
"An employee was removing a pump. The line was not relieved of pressure, causing the pump to blow off as it was removed. The employee's hand was crushed between the pump and couplings, resulting in an open fracture of the left hand. The employee was hospitalized and had surgery.",1
"An employee was guiding film into a machine that packs frozen materials in cardboard, then wraps it in film and uses heat to seal the product. The chain that pulls the film into the machine caught the employee's right ring finger amputating it at the nail line.",0
"An employee was conducting housekeeping in the bale staging area when a nearby forklift reversed and pushed a 2-story bale that was approximately 4-5 feet high. The bale fell over onto the employee; they sustained fractures to the right shoulder blade, rib, and hip.",1
"An employee was backing a snowmobile up to the garage door of the maintenance bay when the vehicle accelerated rapidly. The employee was ejected from the vehicle onto another parked snowmobile, resulting in rib fractures and air in the abdomen. The employee was hospitalized.",1
"An employee was gathering products for an order in the back of a truck while the lift gate was down. The employee fell approximately 5 feet onto the ground, resulting in nine rib fractures, a collarbone fracture, a lung puncture, and a bulging vertebral disc in the back.",1
An employee was feeding webs down the board machine for the web press printer. The webs began bunching up while they were being cut. The employee went to fix the webs resulting in amputation of their left index finger. The machine was guarded at the time.,1
An employee was using a fastening tool to install conduit while standing on a ladder. One of the pins ricocheted from its installation point in the concrete decking and punctured the employee's abdomen.,1
"On February, 15, 2023, a forklift operator was finishing loading a semi-trailer. As the employee was closing the roll door of the trailer, his right ring finger was caught between the door and the plate. The tuft of the employee's right ring finger was amputated.",0
"An employee was reloading staples into the staple driver on a bead building machine. When loading the staple driver into the machine, one of the wires to hold the tray in place popped out of the pulley. As the employee attempted to realign the pusher wire, their right middle finger was caught between the staple driver and the pulley bracket, resulting in an amputation to the finger.",0
"An employee was walking to the registers when they slipped and fell on a package of candy on the floor, resulting in a right hip fracture. The employee was hospitalized.",1
"An employee was operating a milling machine used to shape and cut polyurethane material. The employee went to clear excess material under the milling machine when his hand was caught between the two fixed blades, resulting in a right index finger amputation.",0
An employee was stocking shelves when a customer struck the employee with a cart. The employee fell to the floor and sustained a hip fracture.,1
An employee was cutting a foam board with a portable table saw when their hand slipped and the saw blade partially amputated their right little finger.,0
"An employee was opening or closing the door of a trailer when wind caught the door, pushing it into the employee and causing them to fall to the ground. The employee sustained fractured hips.",1
"An employee was cutting a 2 x 4 board using a cordless band saw. The saw moved and lacerated the employee's left index and middle finger, resulting in a middle finger amputation.",0
"An employee was on a ladder trimming branches from a tree when they fell 7 feet to the ground below. The employee sustained a clavicle fracture, rib fractures, a lumbar vertebra compression fracture, and a collapsed lung.",1
An employee was walking up a flight of stairs in a construction zone when they fell approximately 6 to 8 feet to the ground. The employee sustained leg fractures.,1
"An employee was walking through the parking lot to report for their shift when they slipped on ice and fell to the ground, resulting in a broken hip.",1
An employee was lining up a set of disc gangs in a frame using a crowbar. There was something stuck where the pin would go and the employee went to clear the jam when the spring moved. The employee's right index fingertip was amputated.,0
"An employee was climbing up a 6-foot A-frame ladder when they fell to the ground, resulting in a broken left leg.",1
"On February 16, 2023, an employee working in the capacity of an iron worker was watching a connection point to make sure the softener and rigging did not slip or get caught while the crane was picking up the load. The employee's finger was caught on the wire rope sling, causing the finger to be partially amputated. The employee required surgery.",1
An employee had been speaking on phone with a hostile client. The employee experienced chest pain and was hospitalized for a heart attack.,1
"An employee was struck by an excavator as it was backing up, resulting in a broken right tibia and a possible foot injury.",1
An employee was walking next to a patient while assisting the patient up the paver driveway to the front door of a home. The employee tripped over the edge of a paver and fell to the ground. The employee was hospitalized with a fractured right femur.,1
An employee was utilizing a brake press when the piece of steel supported by the crane fell out of the machine clamp and onto the employee. The employee sustained a broken left leg approximately 6 inches above the knee.,1
"An employee was operating a powered pallet jack when he noticed plastic was wrapped around the wheel. The employee got off the pallet jack while a co-worker used their pallet jack forks to lift up the vehicle so the employee could remove the plastic. As the employee grabbed the plastic, the pallet jack shifted off the co-workers pallet jack and fell onto the employees' fingers. They sustained amputations to the right middle and ring fingertips.",0
"A truck driver was delivering fuel to a vendor and got stuck in mud in the yard. The employee attached his tractor trailer to a front-end loader to free it from the mud. The front-end loader reversed and the employee was crushed between both vehicles. The employee sustained broken ribs, a broken humerus, a kidney injury, and an open wound.",1
"An employee's left little finger was pinched between a wrench and a forklift bucket, resulting in an amputation.",0
"An employee was adjusting the jib of a forklift boom attachment in preparation for lifting a motor. While setting up the telescoping portion of the boom attachment, the tip of the index finger on their right hand was caught and pinched, resulting in an amputation.",0
"An employee was walking in a parking lot after her shift when her left foot struck a wheel stop, causing her to fall to the ground. The employee sustained a left arm fracture.",1
An employee was picking up a 28-pound rim from a trough to place it in a rack when they felt a strain in their lower back. The employee was hospitalized.,1
"An employee was operating a double jack. While turning, the vehicle struck a guardrail, causing the employee's leg to also strike the guardrail. The employee sustained a left leg fracture.",1
An employee was troubleshooting a mix fill issue and attempting to clean a fill flap when the fill flap closed on their fingertip. The employee's left middle finger was partially amputated.,0
"An employee was milling metal side rails. As he was clearing debris, his left little finger was pulled into the mill bit, resulting in an amputation.",0
An employee was transporting product around the cooler using a forklift. The employee's left foot was crushed against a pallet that was against the wall. The employee sustained a laceration.,1
"An employee was walking on a skid carrying parts when they fell off the skid and landed on the concrete floor, resulting in a left femur fracture.",1
"On February 16, 2023, at approximately 6:35 p.m., an employee was working with boxes. A box passed them and the scanner printer arm with the label did not come off as it should have. The employee was attempting to remove the label from the arm when their left index finger was caught between the arm and the printer, resulting in a fingertip amputation.",0
An employee was loading an oven with rolling racks of chicken when they slipped and struck their head on the railing. The employee sustained a concussion.,1
"An employee was helping a client when they pushed the injured employee off the stairs. The employee sustained rib fractures, a concussion, and head bleeding.",1
"An employee was participating in a role-playing activity that required them to wear handcuffs and escape a vehicle. The employee fell out of the vehicle and struck his head on the ground, resulting in a concussion.",1
"An employee was at the base of a platform's ladder, assisting in lifting an adjustable compression strut that weighed 102 pounds. The strut was an estimated 6 feet above grade when the knot on the lifting rope failed. The strut fell and struck the employee, knocking him to the ground. The employee sustained fractures to his lower left extremity including the tibia and fibula. The employee also suffered a dislocated ankle.",1
"An employee was walking in the parking lot from their car to the front door when they slipped on ice and fell, resulting in an arm fracture.",1
An employee was getting out of his truck when he slipped on the top stair and fell 4 feet to the ground. The employee sustained a head injury.,1
"An employee was cleaning a printing roller on a coating machine when their hand became caught in the converging rollers, resulting in an amputation.",0
An employee sustained an ankle injury when a crate of glass tipped.,1
"An employee was closing the worksite gate when they slipped on ice and fell, resulting in fractures of the ribs, nose, and eye socket, as well as a punctured lung and concussion.",1
"An employee was handling side rails while on the production form when the magnet used the move rails was powered on. The employee's fingers were caught between the rails and the magnet, resulting in a right thumb tip amputation.",1
An employee was performing maintenance in an elevator shaft when their hand was caught in a roller guide assembly of an adjacent car. The employee's right little finger was fractured.,1
"An employee was filling a crane tire crane using a compressor. The rim failed, causing parts to fly off and strike him in the abdomen and pelvis. The employee sustained a laceration to the abdomen and fractures of the pelvis and left femoral head.",1
"An employee was helping to unload 20 to 30 pounds of beaded prom dresses from a trailer when they fell from a step stool to the floor of the trailer, resulting in a fractured wrist.",1
"An employee was preparing to offload a trailer that was backing up to a dock. As the employee opened the trailer doors, a 300- to 400-pound steel rack containing parts fell onto the employee, pinning him to the ground. The employee was hospitalized with a pulmonary contusion to the right upper lobe and fractures to the T12, L1, and L2 vertebrae of the thoracic and lumbar spine.",1
An employee was clearing a jam from a machine that vacuum seals food products and amputated their left index finger. The machine was guarded at the time.,0
An employee was walking out of the stockroom when she tripped over the base deck and fell to the floor. She sustained an injury to her left elbow.,1
"An employee was walking between two prep tables when a co-worker turned to throw something away and bumped into the injured employee. They then tripped and fell to the floor, resulting in a hip fracture.",1
An employee was adjusting the flat scratcher of a sweep cultivator when the metal tube of the scratcher slid down and caught the tip of the employee's left thumb between the pipe and C-clamp. The employee sustained a left thumb tip amputation.,1
An employee was operating a cheese grater amputated a middle fingertip.,0
"Six employees were walking on a sidewalk between buildings on campus during inclement weather when a tree fell. One employee was hospitalized after she was struck by the tree branches, causing her to fall and a branch fell on her legs. She sustained multiple fractures (skull, neck, spine, shoulder, and ribs) and a subdural hematoma. Two other employees were treated at the hospital and released.",1
"On February 16, 2023, an employee was removing a piece of film from a machine when his right thumb was pulled into the nip-point and amputated.",1
An employee was diagnosing an issue with a machine when it activated. Three fingers on the employee's left hand were crushed by the overhead trolley gear and medically amputated.,0
"A crew was placing spacers on a new water pipe that was lifted on one end to help with the placement of the spacers. The strap began to twist and the pipe struck the employee's right foot, resulting in a laceration to the right big toe and a foot fracture. The employee was hospitalized and required surgery.",1
"An employee was servicing a dehumidifier when he noticed an abnormal noise. The employee began inspecting the housing unit and manually rotated the belt. The motor then engaged, putting the fan in motion and pulling his left hand into the machine. The employee sustained partial amputations to his left middle and ring fingers.",1
An employee was pulling a piece of meat from a conveyor when their arm was caught in the sprocket. The employee sustained a hand and forearm fracture.,1
"An employee was using a chipping hammer to remove concrete so that he could move a toilet flange. Excess concrete was removed on the end of a post-tension anchor, causing the cable to dislodge from the slab and strike the employee in the kneecap. The employee sustained a kneecap laceration.",1
An employee was examining a leak in a steam line when hooking it to an oil car. The employee was burned by the steam.,1
Two temporary warehouse employees got into an altercation when one employee shot the other in the leg with a handgun. The injured employee was hospitalized.,1
"An employee slipped and fell, resulting in injuries.",1
"An employee was operating a magnetic drill when his glove was caught by the rotating drill bit, resulting in a fingertip amputation.",0
"An employee was stepping down from one level to another, about 10 inches below, when he lost his balance and stepped on a protruding 3/8-inch rod. The rod punctured the sole of his right foot.",1
"An employee was using electrical magnets to lift a 7,351-pound steel plate onto the burning table of a plasma cutter. The steel plate slipped and fell onto the employee's finger, resulting in a partial amputation of the left little finger.",1
"An employee was cutting a log with a chainsaw when the chainsaw kicked back into the employee's left leg. The employee was hospitalized with a left leg laceration, which required surgery.",1
"An employee was operating a hydraulic press when his left middle finger was crushed between the part he was pressing and the press table. The employee sustained an open fracture of the tuft of the distal phalanx, which led to a partial amputation of the left middle fingertip.",1
"An employee was trimming scrap metal when their hand was caught in the 15-ton hydraulic press. The employee's hand was crushed, resulting in a finger amputation and loss of skin between both thumbs and index fingers.",1
"An employee was walking down the hall when her ankle gave out, causing her to fall to the ground and sustain an arm injury. The employee was hospitalized for a left humerus fracture.",1
"An employee was sliding lumber onto a rack when they tripped over a board and fell to the ground, sustaining a left hip fracture.",1
"An employee was moving a piece of bar material inside a hydraulic vise on a band saw machine. The switch was toggled closed, crushing the employee's left middle finger in the vise. The finger was amputated.",0
"An employee was rigging equipment to be placed on the tank roof. While setting up containment rigging, the steel outriggers slipped from the employee's hand and slammed on top of his finger, crushing it against the exterior tank roof. The employee sustained a crush injury to the left index fingertip and nail bed damage that resulted in an amputation.

Note to coder- amputation",0
"On February 17, 2023, an employee was retrieving tools from his toolbox when the vehicle in the bay lurched forward and struck him in the legs from behind. The injured employee was hospitalized for a left leg fracture and bruising on his right leg.",1
"An employee was on a step ladder placing interior vertical door trim. As the employee changed positions, the ladder tipped over, causing the employee to fall approximately 6 feet to the cement floor. The employee sustained fractures to the orbital wall, maxillary sinus, sphenoid, temporal portion of the skull, and bilateral distal radii. The employee also sustained pneumocephalus, a subarachnoid hemorrhage, and an acute subdural hematoma as well as loose teeth. The employee was hospitalized.",1
An employee was using a circular saw to create a notch on a 4x4 piece of lumber when the saw blade amputated the employee's fingertip.,0
"An employee was standing on a baker's scaffold approximately 3 feet above finished floor to install equipment. While taking measurements, the locking pins came out on one end of the scaffold, causing the scaffold to collapse. The employee fell 3 feet and sustained a left ankle injury.",1
"An employee was preparing to work on a flare when it discharged oil. The oil struck the employee, causing burns to the body, wrist, and hand.",1
"An employee was replacing a fuse in an electrical panel box when an arc flash occurred. The employee sustained burns to the face, torso, arms, and hands.",1
An employee was holding a piece of waste sliver in their left hand while resetting the clearer when the take up shaft grabbed the waste sliver and pulled the employee's left little finger in toward the shaft. The employee sustained an amputation of the top portion of the left little finger.,1
"An employee was helping to move skid steer plates when one plate shifted, crushing the employee's right index fingertip. The employee was taken to the hospital, where the fingertip was medically amputated.",0
"An employee was using a band saw to cut an I-beam when his left index finger was caught under the I-beam and roller, resulting in a partial amputation.",0
An employee was installing insulation on a porch roof when he lost his balance and fell approximately 10-12 feet to the ground. The employee sustained a head laceration and neck fracture.,1
"An employee was using a forklift to lift a super sack of carbon when material became stuck under it. The employee went to remove the material when the lever was activated, bringing the forks down onto the employee's right forearm. The employee sustained a fracture.",1
"An employee was stepping on a dock plate when they slipped and fell. His right hand landed in the pinch point as the dock plate came down, causing the employee's fingers to be crushed; the middle finger was amputated.",0
An employee was using a leveling machine when their finger was caught between a table and a sheet of material exiting the machine. The employee sustained a fingertip amputation.,0
"An employee was welding an eye hook to a bagasse scraper when hot water discharged from the bagasse sprayers behind him, striking the employee. The employee sustained burns on his lower back and lower legs.",1
"An employee was removing a 300-400-pound valve from a wellhead using a crane. The auto crane held tension on the valve and a bolt got hung up between the two flanges. When the bolt came free, the valve dropped and landed on the employee's finger. It crushed his finger against the wellhead flange, resulting in a laceration and broken right ring finger.",1
"An employee was in the building when they fell down the stairs and sustained bruising to the shoulders, right ankle, and left lower leg. The employee was hospitalized.",1
"An employee was cleaning an auger feed screw during a maintenance shutdown period. While cleaning, the employee manually turned the auger screw with their left hand and a finger was pinched by the auger, resulting in a partial amputation without bone loss.",0
An employee was operating a screening machine. He was removing a dropped rag from the machine when his arm was caught and broken between a rotating bar and a stationary part in the machine.,1
"An employee was performing maintenance when the hammer press lowered down and caught the end of their right index finger, resulting in a partial amputation.",0
"On February 17, 2023, the injured employee was assisting the operator of a projection welder machine as they were welding a coupling onto a hot water tank. The machine actuated, and the injured employee's left index finger became pinched between the head of the projection welder and the tank. The finger was partially amputated.",0
"An employee was trying to catch a 36-pound box when his left ring finger was caught between the box and the skid, resulting in a fingertip amputation.",0
An employee was using a 4.5-inch grinder to finish concrete when the abrasion wheel came apart and struck the employee's right cheek and knee. The employee sustained lacerations.,1
"An employee had been cleaning up the job site. A cordless drill fell, got caught on a piece of rebar, and became engaged. The drill caught the employee's left little finger and amputated it.",0
"An employee was returning to work on a scaffold tower when he missed a step, fell, and fractured his left hip.",1
"On February 17, 2023, an employee was pulling a case of oil out of the overstock area when she tripped over a case of oil that was on the floor next to her. She fell forward and struck her face on a 30-pound cylinder, resulting in a nose and wrist fracture as well as an eye injury that required surgery.",1
"An employee was delivering mail when they slipped on ice and fell to the ground, resulting in a head injury.",1
"On February 17, 2023, at 12:50 PM, an employee was walking across a dining room floor when they slipped and fell, fracturing their right knee.",1
An employee was towel-drying a vehicle when a customer pulled forward and pinned the employee between their car and another car. The employee sustained a left leg and ankle fracture as well as abdominal bleeding.,1
An employee was assisting in pulling a dryer shaker into position when the tow chain broke and a link from the chain struck the back of his head and knocked him unconscious. The employee sustained a concussion.,1
An employee was troubleshooting a lighting fixture that was not working when they were shocked by 277 volts. The employee sustained burns to the hands and required stitches on the hands and biceps.,1
"An employee was standing from a seated position when they tripped and fell, sustaining a left ankle fracture.",1
"An employee was working from a lift truck bucket to take 500-pound X-braces down from between the uprights of an H-type power transmission line structure. The employee used a hammer to drive a bolt out so he could connect the X-brace arm to the crane rigging and lower it to the ground. The X-brace arm vibrated off the bolt connection points, causing the cross brace piece to hinge toward the employee's arm. The employee was hospitalized for a muscular injury to the lower left arm and wrist.",1
"An employee was preparing a production line to roast mushrooms. As he was setting an 80-pound plate down, it caught and partially amputated his little finger.",0
"An employee was scanning items on the truck trailer when they fell from the access ladder to the ground, resulting in a possible left leg fracture.",1
"An employee was getting off an electric pallet jack when it ran over his foot, resulting in a fracture.",1
An employee was working with cargo containers when they slipped and fell between the top rail of the catwalk and the deck. They fell 20 feet to the bottom of the hold and sustained a femur fracture.,1
"An employee was setting up for an event and carrying gates downhill. As the employee side-stepped down the slope, their right leg became caught in the compacted snow. The employee's momentum continued forward and their right leg remained fixed in the snow, causing fractures of the right tibia and fibula.",1
"An employee was picking up pipes that had fallen from a forklift. The injured employee's hand was caught between a pipe and the wheel of the forklift, causing an injury to his right ring finger that required medical amputation.",0
"An employee was operating a forklift on a commercial construction site. The employee's fall protection lanyard began dragging on the ground and was caught under the forklift, pulling the employee to the ground. The employee was rendered unconscious and sustained a head and back injury.",1
"A ski instructor was stopped on the hill talking to a student during a lesson when they were struck by another skier traveling at a high rate of speed. The employee sustained an ankle fracture, two rib fractures, and a concussion that rendered him unconscious.",1
An employee was threading the web on a press when his hand was caught between the impression cylinders. Four of the employee's fingers were amputated.,1
"On February 18, 2023, an employee was walking on the north dock by a bay door and fell to the ground. The employee sustained facial lacerations, a fractured right elbow, and contusions to the lower back, hip, and left knee. The employee required surgery.",1
"On February 18, 2023, an employee was returning from their lunch break when they tripped over a parked pallet jack's fork and fell on the concrete floor. The employee sustained a pelvis/hip fracture.",1
"An employee was conducting maintenance and checking alignment on a conveyor belt in the fabrication area of the plant. The employee's sleeve was pulled into the conveyor belt, resulting in an amputation that required hospitalization and surgery.",1
An employee was assisting a customer in an aisle when an altercation arose. The employee was shot by the customer in the left cheek.,1
"On February 19, 2023, an employee was preparing a salad and suffered an amputation to their right index finger on a vegetable/fruit slicer.",0
"An employee was welding on an installed platform and was coming down from the platform when they fell approximately 17 feet onto a metal fence and cable tray. The employee sustained a left toe fracture, thoracic and cervical spine fractures, a leg laceration and a head injury.",1
An employee was maintaining prices on the supermarket shelves when they slipped and fell on spilled yogurt. The employee sustained a knee fracture.,1
"An employee was cleaning out a storage unit. As he lifted a 55-pound steel rack to throw into the dumpster, the rack slipped and his finger was caught between the dumpster and the metal frame of the rack. The employee's left middle fingertip was amputated.",0
An employee opened and closed his trailer's roll-up door and sustained a hernia.,1
"An employee was clearing a jam on the tongue of a buggy and placed their finger into the hole for the hitch pin on a basket. A forklift driver was picking up the tongue when the forks shifted, causing the employee to receive a partial amputation of the right middle finger.",1
"An employee was preparing to wash out a concrete mixer truck. When the water was turned on, the employee lost balance and fell into the corner of the top rail. The bolt securing the rail failed and the employee fell approximately 7.5 feet, injuring his left knee.",1
"An employee was walking up to the vertical press when they tripped and fell over the rubber mat, resulting in a wrist and pelvis fracture.",1
"An employee was moving a 2,500-pound stenciling machine into a lab using a manual pallet jack. As he was pushing it through the door it became jammed. The employee pushed it through the door and the stencil machine fell onto him, fracturing his femur. The employee was hospitalized.",1
An employee was driving a utility task vehicle (UTV) around a corner when the vehicle collided with another vehicle. The employee sustained a head contusion and laceration that required hospitalization.,1
"On February 20, 2023, an employee was climbing down a 6-foot step ladder that was leaned against a pallet of material when the ladder moved, causing the employee to fall. They were hospitalized with a pelvis and elbow fracture.",1
"An employee was using a large screwdriver to break up and remove debris from the top of crumble rolls. The screwdriver became caught in the machine and the employee's left little finger was pinched between the screwdriver and the machine's guard, resulting in a severe laceration and fracture. The injury required surgical amputation of the first digit just behind the nail bed.",1
An employee was cutting a slab of rubber with a powered hand saw when they sustained amputation of a left-hand finger.,1
"An employee was checking the tension on a chain when they were caught in the chain, resulting in a partial amputation to the right middle finger.",0
"An employee was working on the unscrambler for the notcher when a board became stuck. The employee's finger then became caught between the board the unscrambler, causing a partial amputation to the right middle finger. The machine was not locked out/tagged out at the time.",0
"An employee was walking through a walkway when their foot was caught on a box, causing them to fall and sustain a hip injury.",1
An employee was walking to the fitting room when they tripped on a cardboard box and fell. The employee sustained a shoulder fracture.,1
"On February 20, 2023, an employee was watching the backhoe move steel plates for storage when the employee was instructed to attach a 4,000-pound chain to the excavator's bucket. The other end of the chain was looped through the steel plate's hole. While the employee was attaching the chain to the excavator bucket, his left ring finger became caught between the chain and the bucket, resulting in the amputation of his left ring finger.",0
"An employee was operating a tractor. After farming the field, the employee stepped out of the tractor cab, missed his step, and fell to the ground. The employee sustained a right hip fracture.",1
"An employee was on a pallet that was being lifted by a forklift to a height of 20 feet. The pallet broke and the employee fell to the warehouse floor sustaining fractures to their nose, ribs, and ankle.",1
"An employee was removing the bolt covering of the hydraulic access on an excavator when the bolt blew out and crushed his hand, resulting in a left index finger amputation.",1
An employee was operating a forklift when they were found unresponsive on the warehouse floor. The employee sustained a contusion on the left side of the head.,1
An employee was walking into an office when he fell to the floor and sustained a femur fracture.,1
An employee was repositioning a patient when they began experiencing sharp pain in their right shoulder and neck.,1
An employee was operating a forklift to move product when their foot became caught between the vehicle and a steel structural building support. The employee's foot was amputated.,1
"An electrician was troubleshooting a valve on a hot loop tank when they were splashed with hot water, resulting in first and second-degree burns to the head, neck, back, and leg.",1
An employee was unjamming a rotary valve when their left middle fingertip was amputated by the chain/sprocket.,0
An employee was MIG welding when the welding wire poked through his glove and contacted his left little finger. The employee was hospitalized for a bacterial infection.,1
"An employee was about to install a fence and use a core drill. As the employee was working, his hair became stuck in the drill and he suffered an avulsion of the skin from his scalp and both ears and required surgery.",1
"Two operator technicians were processing side trim coils on a repair line when scrap on the north side became jammed in the scrap chute. The employee stopped the line and went to clear the scrap buildup as the other employee jogged the machine to realign the scrap for the other employee to remove. The injured employee's left hand was then caught on the scrap chopper and his left index, middle, and ring fingers were crushed.",1
An employee was connecting a propane tanker to a propane tank when the propane ignited and the employee became engulfed in fire. The employee was hospitalized for burns that required surgery.,1
"An employee working on the roof fell 12 to 14 feet through a skylight to the ground, resulting in a spine fracture.",1
"An employee was retracting an extension ladder; the hinges jammed so the employee climbed the ladder to inspect. At approximately 15 feet above ground level, the employee fell backward and landed on their right hip, fracturing it.",1
An employee was operating an electric pallet jack when it struck a stationary pallet jack. The employee's right foot was caught between the two pallet jacks and fractured.,1
An employee was prepping the stage and separating magnets using a wooden board when another magnet was attracted by the polarity and the employee's fingers became caught. They sustained an amputation to the left middle and ring fingers.,0
An employee was using a robo-arm to change a tire when the robo-arm pinched and amputated his right ring fingertip. The employee was hospitalized.,1
An employee was on break and went back out to the facility to begin work near the conveyor area. A piece of lumber came off the conveyor and caused the employee to sustain a left inner thigh laceration.,1
An employee was holding the line with a hand tool during a controlled burn when their pant leg caught on fire. The employee sustained burns to their legs.,1
An employee was installing a bonding cable in an electrical panel when an arc flash occurred. The employee sustained facial burns.,1
"An employee was troubleshooting a resin-handling system when the rotating rotor unit caught the employee's fingers, resulting in the amputation of three of the employee's fingertips.",0
"An employee was using an electric winch to pull a boat onto a trailer. The boat moved and caused the employee to lose balance and grab the frame of the trailer with his left hand. At the same time, the rope quickly tightened and struck the employee's left hand, severing his left ring finger above the first joint.",1
"An employee was applying stucco when they fell 12 feet from a scaffold to the ground, resulting in a head laceration.",1
"An employee in a cold storage warehouse was sitting on a chain railing on a platform when the chain broke, causing the employee to fall backward approximately 4 feet, resulting in a head injury and loss of consciousness. The employee was hospitalized.",1
"An employee was observing a ripsaw that was recently repaired. The employee pointed at something within the panel area and was caught by the belt and pulled into the machine, resulting in a compound fracture to the right forearm as well as abrasions to the right hand and fingers.",1
"An employee was reaching for a pipe that was extruded from a die block. The pipe recoiled back toward the die block, causing the employee's finger to become pinched and amputated.",0
"An employee was shutting down the pump on a 3-phase separator when it ignited. The employee was hospitalized with burns on their arms, face, chest, and back.",1
An employee was on her way to work when she was struck by a vehicle on hospital grounds.,1
"An employee was unloading product from a truck when they fell approximately 4 feet from the liftgate to the ground. They sustained five rib fractures, a shoulder fracture, and a punctured lung.",1
"An employee was inside an aircraft loading freight containers. As she was pulling a container, her foot became caught under the wing lock, resulting in a foot fracture.",1
"An employee was trimming a 2 x 4 piece of wood using a table saw. As the employee was guiding the push stick, the wood kicked back and his left hand slipped. His middle finger was then caught on the blade, resulting in a partial amputation of the fingertip and a laceration to the right ring finger.",1
"An employee was assisting in the movement of a reel of steel wire onto a truck using a forklift and a sling. The load became stuck on a stanchion and the employee pulled up on the load, causing the employee's hand to become caught/crushed between the reel and the boom of the forklift. The employee sustained two hand fractures.",1
"An employee was locating an electrical power source when he sustained electrical burns on his right hand and forearm from a live, high-voltage line. The employee was hospitalized.",1
"An employee was welding on a flange that weighed over 1,000 pounds. The flange fell from the positioner it was on and struck the employee, causing him to fall to the ground level. The employee's leg was caught underneath the flange, resulting in a below-the-knee amputation of the left leg.",0
An employee used a ladder to access the upper portion of a machine. While clearing a jam the employee's hand got caught in the machine. The employee was hospitalized.,1
"A forklift operator was picking up a pallet of doors. When the load was lifted, it caused overlapped pallets on the other side to fall over, striking an employee. The injured employee became caught under approximately 692 pounds of doors and sustained a fractured left ankle and a torn anterior cruciate ligament (ACL) and medial collateral ligament (MCL) in the left knee.",1
An employee was climbing into the back of the trailer to unclamp the truck cap for unloading. The employee slipped on the metal trailer floor and fell backward out of the trailer onto the driveway. The employee sustained a right hip fracture that required hospitalization.,1
An employee was cleaning a flexographic press when their left hand was caught in the machine and three fingers were crushed. Their index finger sustained an amputation.,0
"An employee was using a wrench to make an adjustment to a guard on the wafer inspection conveyor belt. The employee’s finger became caught between a bracket and the belt, resulting in an open fracture with a nailbed avulsion.",1
"An employee was using a come-along winch to move steel bridge girders. The come-along hook rolled out of its attachment point, causing it to spring back and strike the employee in the head. The employee sustained head trauma.",1
"An employee was loading hydrants onto a paint line bed using hoists and clamps. A hydrant slipped and their fingertip was pinched between the hydrant and clamp, resulting in a fingertip amputation.",0
An employee's left little fingertip was amputated in the exit chute of a machine.,0
"An employee was cutting furring strips with a battery-powered circular saw. A furring strip slipped while being trimmed, causing the saw to slide and amputate their fingertip.",0
"An employee was retrieving a charged battery from the charging station using the magnet arm on a battery changer. The employee leaned toward the battery to ensure it was properly aligned before engaging the shuttle. The employee then leaned back to engage the controls with his right hand while his left hand remained over the front edge of the battery changer. When the shuttle engaged, his left middle finger was crushed.",1
"An employee was cleaning an industrial roller while wearing gloves when his hand and fingers were pulled into the roller. While attempting to pull his hand out of the roller, the employee sustained a finger amputation and a hand injury.",0
"An employee was pushing a housekeeping cart when it collided with a dietary cart, causing the employee to fall and strike her head on the wall. The employee was hospitalized for a left hip injury and a concussion.",1
An employee was slicing tomatoes with a kitchen knife when they sustained a fingertip amputation.,0
An employee was removing groove filler from a vinyl extrusion piece using a handheld cutting tool. The tool lacerated the back of the employee's left hand and the employee was hospitalized.,1
"An employee was opening a semi trailer door at a dock when the truck moved forward, causing the employee to fall from the loading dock landing. The employee sustained two fractures of the right knee that required hospitalization and surgery.",1
"An employee was operating a milling machine. As the employee went to brush away metal shavings near the cutting tool, their glove became caught, resulting in an amputation of the top part of the left little finger.",0
"An employee had completed packing materials onto a moveable pack stand. While pushing the pack stand, a wheel became stuck, causing the pack stand to tip over. Bundled metal material weighing 1,051 pounds fell 33 inches from the pack stand onto the employee's right foot. The employee sustained an amputation.",1
"An employee was removing a chain binder hook under a section of a conveyor that was on blocks approximately 2 inches off the floor. The conveyor shifted as the employee was reaching to remove the hook and it pinned his left arm, causing a forearm fracture.",1
"An employee was exiting the building to go to her car at the end of her shift when she slipped and fell in the parking lot, resulting in a right arm fracture.",1
A temporary employee was working on a ice resurfacing machine when they sustained a partial amputation.,0
"An employee was using a precision knife to cut medium-weight paper while using a ruler. The knife jumped the ruler and her left index finger was lacerated, resulting in a partial amputation.",0
"An employee was bending a part on the brake press when his thumb was pinched between the part and the articulating lift, resulting in a crush injury and amputation to the thumb.",0
An employee was climbing a ladder to look for a pair of shoes when they fell onto their back and sustained a strain as well as a left foot injury.,1
"An employee was using a ladder to stock footwear merchandise onto shelves. The ladder backets failed, causing the employee to fall 6 feet and sustain back and leg injuries.",1
"On February 22, 2023, an employee was exiting the office to go home for the day when they slipped on ice and fell, resulting in an ankle fracture.",1
"On February 22, 2023, an employee was draining a fryer vat to unclog it. When the drain closed, the employee's left index finger was caught on the metal drain trap, resulting in a fingertip amputation.",0
An employee was operating the laminator and removing a stuck part from within the machine. The bottom plate of the machine raised and crushed the employee's left hand.,1
An employee in training was operating a moulder machine. The employee opened the machine to make adjustments when their ring finger was amputated and their middle finger was injured. The machine was not locked out at the time.,0
"An employee was preparing to unload 70-pound panels of 3x8 particle board that were stacked vertically in a tractor trailer. Another tractor trailer passed by, causing the truck to vibrate and the panels to fall onto the employee. They were struck in the head by the panels.",1
"An employee was coming back from lunch when he noticed a machine alarm on the low pressure cooling conveyor. Two pallets became jammed on the lifter and as the employee went to clear the jam, his right middle finger became pinched between the guarding on the conveyor/lifter and the tool. The employee sustained a right middle finger amputation down to the first knuckle.",0
"An employee was cleaning a client's bathroom when she fell and struck her head against the bathtub, resulting in a head injury.",1
"An employee was working at a grinder when pipes began coming off too fast. As the employee went to stop the pipes with the f-bar, their fingers became caught between the bar and a pipe. The employee sustained left middle and ring fingertip amputations.",0
An employee was clearing a jam of wooden boards in a pallet building machine when his finger was pinched against the moving bar and a stationary piece of metal. The employee sustained a left ring fingertip amputation. The machine was not locked out at the time.,0
"On February 22, 2023, an employee was directing a charter bus into the wash bay area to be cleaned when their left arm was pinned between the bus and a cement pole. The employee sustained an injury to the left arm.",1
"On February 22, 2023, an employee was welding assembly parts together when their left hand was caught between the welding crane and fixture table, resulting in burns to the left hand. The employee was hospitalized.",1
"An employee was using a floor scrubber and went to move a skid out of the way with a forklift. While operating the forklift, the vehicle collided with a stationary mezzanine structure and the employee sustained a severe arm injury resulting in amputation at the elbow.",1
"An employee was troubleshooting a problem with a breading filter when the internal airbag ruptured, causing oil to splash onto the employee's hand. The employee sustained burns to the back of their hand from the wrist to the knuckles and required hospitalization.",1
An employee was struck in the head by a hockey puck while exiting the locker room. The employee sustained a laceration above their left eye.,1
A nurse in the intensive care unit was treating a patient with an infection when they contracted the infection and were hospitalized.,1
"On February 22, 2023, an employee was performing electrical work inside of a drop ceiling when he made contact with an electrified wire. The employee sustained an electric shock, causing him to fall and strike his head on a nearby printer. The employee sustained a head laceration.",1
An employee was operating a loader on the tipping floor at the solid waste facility and became ill after sustaining an insect bite that caused an allergic reaction. The employee was hospitalized.,1
"An employee was using water pressure to unclog a grease line when the pipe burst, causing the employee to sustain a hand injury.",1
"An employee was ascending an 8-foot track ladder with their hands on the steps as they walked up. Their hand slipped and they fell backward onto the floor, resulting in a left leg fracture.",1
"An employee was standing on a ladder to perform repairs on a cable case when they fell approximately 6 feet to the ground, resulting in a left foot fracture and dislocation.",1
An employee was delivering mail to a private residence when they fell down the steps and sustained a hip injury that required surgery.,1
An employee was using a drain cleaning tool (snake) to clear a gutter floor drain in the plant when he sustained an amputation to the tip of his left middle finger.,0
"An employee was walking to her vehicle when she tripped on a parking block and fell, resulting in a right femur fracture as well as an injured right hip and hand.",1
An employee was using a hand saw to cut poultry when they sustained a partial amputation of the left index finger.,0
An employee was cutting metal using a table saw when the his left thumb was amputated from the cuticle area to the top.,0
An employee was conducting a private ski lesson when they struck a log that was submerged under the snow and fell forward. The employee sustained a right tibia fracture.,1
"An employee was removing a valve that was approximately 5 feet tall and weighed 400 pounds from a forklift tine in the shipyard. The employee lost footing and slipped, causing the valve to fall off the forklift and land on their right foot, resulting in a foot fracture and lacerations.",1
An employee was lifting landing gear of a trailer when they sustained a back injury.,1
An employee was operating a golf cart to cross an empty parking lot when the vehicle struck a utility pole that was extending from behind a truck. The employee sustained facial fractures.,1
An employee sustained an amputation of the right ring fingertip while cleaning a conveyor belt.,0
"An employee was walking out of the meat department, slipped on the water and chemical solution on the recently-cleaned floors, and fell backward onto the tiled floor. The employee sustained a right femur fracture.",1
The injured employee was walking on top of the battery. He was walking toward the cab and passing another oven when its lid came off and a flash fire caused burns to employee's hands and face.,1
"An employee was stocking lumber when his finger was crushed, resulting in an amputation.",0
An employee was working on a chopper machine when two fingers were amputated.,0
"An employee was disassembling a pallet when his right hand came in contact with the blade of a band saw, resulting in a right ring finger amputation.",0
"An employee was removing ceiling tiles in a mill when they stepped on an unsupported area and fell 12 to 15 feet to the floor below, resulting in a leg fracture that required surgery. Fall protection was not worn at the time.",1
Employee 1 was installing floor joists when he called employee 2 to come over because he was not feeling well. Employee 2 came over and had to retrieve employee 1 by his safety harness. Employee 2 found that a nail from a nail gun had punctured the right side of employee 1's neck.,1
An employee was cleaning floors with a lime/rust removing solution and bleach when they were overcome by chemicals and hospitalized.,1
"On February 23, 2023, an employee was cleaning an auger in preparation to run product through. As the employee was cleaning the auger, their right middle finger was caught by the screw and housing, resulting in amputation.",0
An employee was at a worksite when he sustained a back injury and was hospitalized.,1
"An employee was working on top of a walk-in cooler, approximately 9 feet above ground level when they fell to the ground and sustained injuries.",1
"An employee was using a torch to cut a unit when they sustained burns to 31% of their body, including their hands, neck, and head.",1
"An employee was working in the assembly area when a 3/4 inch board became stuck in the ripsaw. As the employee pushed the board through, the chain caught her finger and pulled it in, resulting in an amputation to the right middle fingertip.",0
"An employee was removing trash from outside of a trash can when they lost their balance and fell to the ground, resulting in a hip fracture.",1
"An employee was assisting a co-worker to cut a hole in a roof deck for an HVAC. The wire that secured the cover bound up and the employee shook the cover to release it. He was then pulled into the hole and fell to the next level, resulting in a hip and shoulder fracture.",1
An employee was assisting on a rear load refuse truck and stepped up onto the driver side riding steps. The winch tilt cable on the rear of the truck crushed the employee's left hand between the cable and a piece of metal.,1
An employee was on a 4-foot 2-inch ladder placing a firearm on a shelf when they fell to the concrete floor.,1
"An employee was cutting a tree that was on the ground when the tree struck him in the arm, resulting in a fracture.",1
"An employee was walking into the office when he slipped on ice and fell, resulting in a shoulder injury.",1
"An employee was on a semi flatbed using a prybar to unload structural steel beams. The prybar slipped, causing the employee to lose his footing and fall off the bed to ground. The employee sustained left arm and elbow fractures as well as bilateral wrist fractures.",1
"An employee was leaving the operator platform of a digger derrick. The employee stepped off their seat onto the catwalk and slipped on ice. The employee fell to the catwalk and the ground below, resulting in a forehead laceration and broken wrists.",1
"An employee was troubleshooting a connection on a dozer when aerosol fluid ignited, due to an electrical arc from exposed wire. The employee sustained burns to their hands.",1
An employee was applying oil to a cylinder in a vacuum sealing machine when he sustained a left middle fingertip amputation.,0
"An employee was loading laminations and was putting the clamps through the hoist. He lifted the load with the hoist controller in his right hand and his left hand was caught between the turntable cabinet and the hoist lifting device, resulting in a left index fingertip amputation.",0
"Two employees were installing a fuel tank on a wheeled loader. They were using a manual transmission jack to lift the fuel tank into place to secure it to the frame of the machine. While one employee was operating the jack to line up the third hole, the injured employee was feeling the bolt hole to ensure it was lined up. The tank slipped, causing the injured employee’s left middle finger to become caught between the bolt hole of the fuel tank and the bolt hole of the frame of the machine. The employee sustained a fingertip amputation.",0
"An employee was setting up for the work day when he fell 8 feet through the subfloor of the house as he exited to the garage. The employee sustained brain hemorrhaging, rib fractures, and a spinal injury.",1
An employee was offloading equipment when they fell off the back of a truck bed to the ground. The employee sustained rib and skull fractures.,1
An employee was installing a section of a conveyor when his left index finger was pinched between a bracket and a roller. The employee sustained a partial amputation to his finger.,0
An employee was pushing stuck parts through a conveyor belt when they sustained an amputation.,0
"An employee was setting large metal plates when their finger was pinched between plates, resulting in a right index fingertip amputation.",0
An employee was preparing poles for shipment when one of the poles rolled off the stack and struck his leg. The employee sustained a broken leg.,1
An employee was getting into the driver side of a pickup truck when he lost balance and fell out of the vehicle onto the ground. The employee sustained a back injury and was hospitalized.,1
An employee fell to the floor when her shoelace was caught on a drawer near her desk. The employee was hospitalized; she sustained a non-displaced femoral neck injury.,1
"An employee was cleaning the inside of a laminator machine when their arm was caught, resulting in a burn and hospitalization.",1
An employee was making adjustments to an overhead garage door when the unit started and his hand was caught in the drive chain. The employee sustained a left index finger laceration.,1
"Two employees were moving a conveyor belt for washing when the stand placed under the belt swung and struck the injured employee in the shin, fracturing his leg.",1
"An employee was welding and grinding the motor mounts under the tail sawyer. The equipment was repressurized, causing the hydraulic unit to actuate and pin the employee. They sustained a right femur fracture that required hospitalization.",1
An employee was performing a pre-trip inspection of a truck/trailer when they slipped on ice and tore a ligament in their right knee.,1
"An employee was operating a shaper machine when the employee slipped and lost their grip on the push stick. Their fingers contacted the saw blade, resulting in a right hand ring and middle finger amputation.",0
Two employees were performing an initial assessment of a roof area when the injured employee stepped backward and fell 15-20 feet through a skylight.,1
"An employee was washing crawfish using the washing machine when the tip of his glove was drawn into the chain on the pulley system. His left hand was pulled into the belt. The employee then used his right hand to pull his left hand free, resulting in four left fingertip amputations and two right finger fractures.",1
An employee was running strips of paper through a paper testing machine. The employee was clearing a jam and sustained partial amputations to the index and middle fingers.,0
"On February 25, 2023, an employee was performing maintenance on a robot cell and went to step down from one platform to the next. He squatted down and put his hand on the edge of the platform preparing to move down to the next platform. The employee's feet slipped in dirt, rocks, and debris and he fell, resulting in a left hip fracture.",1
"The injured employee received a forklift from a co-worker to pull the oven cart out of the oven. The forklift had two fork extenders on it. To take the cart out of the oven, the injured employee removed one fork extender because the forks do not fit under the oven cart with both extenders. The injured employee completed the task and was then placing the second fork extender back on the forklift when he dropped the extender on his fingers, crushing them between the forks and the extenders. The employee's left index and middle fingers were amputated.",0
"An employee was obtaining measurements on ceiling tiles when their foot slipped through a hole in the floor, causing the employee to slip through the opening. The employee had both feet in the hole and was holding onto the top wall. He lost his grip and fell 14 feet to the scissor lift below him, resulting in rib fractures.",1
"An employee was walking to their car after their shift and slipped on snow/ice and fell in the parking lot, resulting in a left femur fracture.",1
"An employee was using a pneumatic chipping gun to chop concrete from a horizontal reinforced steel beam. The chipping gun had become lodged in the concrete and their left index finger was pinched between the pneumatic chipping gun and the existing steel beam, resulting in an amputation just below the nail region and above the top knuckle.",0
"An employee was talking to another employee when he backed into a wood pallet. The employee tripped and fell, resulting in a left femur fracture.",1
"An employee was using a skid loader with a backhoe attachment to dig up a clogged water line. The attachment came loose and threw the employee to the ground, resulting in vertebrae fractures of the neck and back.",1
"On February 25, 2023, an employee was picking up oranges from approximately 7:00 a.m. until 5:30 p.m. Once the employee was home, he began experiencing cramps. He was hospitalized for dehydration.",1
"An employee was performing maintenance on an automated pallet freight machine when the photo eye/reflector was activated, causing stored energy to release and the machine to move. The employee sustained a fingertip amputation.",1
An employee was changing plastic roles on a thermoforming machine when his left hand contacted the cutting section and was amputated.,1
An employee was lifting a snowblower onto a truck when they sustained a back strain that required hospitalization.,1
"An employee was using a 7-foot step ladder to place a switch on the back of warehouse equipment using a hand drill. After finishing, the employee began descending the ladder and missed the last step, falling onto a protruding metal hinge. The employee sustained right ribcage and back injuries.",1
"An employee was using a shopping cart in the produce section to fill an order when their foot came in contact with a half-rolled mat, causing the employee to fall to the floor. They sustained a right humerus fracture.",1
An employee was moving medical equipment when they turned their body in a way that caused pain in their lower back and numbness in their left leg. The employee was hospitalized.,1
"An employee was utilizing a 20-ton overhead crane to place a steel insert into the hull of a ship. The employee attached the crane to the pad eye and began lifting the steel plate. The pad eye failed, releasing from the steel plate and causing it to strike the employee. They sustained a laceration to the right side of the face/head, requiring hospitalization.",1
An employee was clearing a clog in a fryer using a probe when their left hand slipped into the hot oil and was burned.,1
An employee was standing on a ski slope when a guest crashed into them. The employee was hospitalized with fractured ribs and a dislocated/fractured shoulder. The employee was hospitalized.,1
An employee was walking around a car to provide services when they slipped on snow covered ice and fell in a driveway. The employee struck their head on the car and struck the ground with their hip.,1
"An employee was diagnosing issues and performing repairs on a recumbent bike. He began manually operating the bike pedals and his finger was caught in the belt and pulley mechanism, resulting in an amputation to the left index finger.",0
"An employee was climbing down from a roof. The roof hatch cover closed, striking the employee and causing him to fall approximately 10 feet from the ladder to the concrete floor. The employee sustained a pelvic fracture.",1
"An employee was scanning and parking steel bars that were staged on a rack prior to being loaded for shipment. While marking bars, they shifted, pinching the employee's right leg in the gap between two bars. The employee sustained a right leg contusion.",1
An employee was using a 3-point auger when they were caught in the machine and hospitalized.,1
"An employee went to sit in a chair when the chair moved, causing him to land on the floor. The employee sustained a possible hip fracture.",1
An employee was working in the receiving area during the loading and unloading of tractor trailers when they were struck by a reversing fork truck. The employee sustained an ankle and foot fracture.,1
An employee was participating in a training when they were thrown from a horse. The employee struck the ground and sustained a concussion.,1
"An employee was lubricating the nose gear of an aircraft when the nose gear collapsed, causing the nose of the aircraft to fall onto the employee. The employee sustained rib fractures and was hospitalized.",1
"An employee was assisting his co-worker in loading freight into a box truck. As the liftgate was raised with the freight and pallet jack on it, the liftgate dropped about one foot, causing the freight to fall on top of the employee who was hospitalized for multiple spine and rib fractures, lung perforations, and a knee dislocation.",1
"An employee was walking down the passenger boarding stairs to the ramp when he misstepped and fell, fracturing his left arm and elbow.",1
"An employee was assisting with pinning a set of stairs when the stairs shifted and struck the employee. The employee was pinched between the stairs and a stationary forklift, resulting in a pelvis fracture.",1
"An employee was cleaning the rollers under a conveyor on a production line using a paper towel. The employee's hand was caught on the roller that supports the belt, amputating their left index fingertip.",0
"An employee was conducting an inspection on an amusement park ride. As the employee climbed up, he fell and struck the rollercoaster structure, resulting in bruises to the leg and body as well as lacerations.",1
"An employee was walking through the parking lot to get into work when they slipped on ice and fell to the ground, resulting in a left hip fracture.",1
An employee was walking to her vehicle to drive to another location when she slipped on ice and sustained two right ankle fractures and a right wrist fracture.,1
"An employee was standing near a pallet, handing a grinder to another employee. A nearby forklift struck the edge of the pallet that contained metal parts in boxes, causing a box to fall over and strike the employee. The employee was hospitalized for a right tibia fracture.",1
An employee was lifting a coil of steel with an overhead crane when they were caught between the suspended coil and the stationary coil of rim material behind him. The employee sustained hip and femur fractures as well as abdominal injuries.,1
"Employee 1 was setting up his survey instrument at the edge of a concrete apron surrounding an 11-foot-deep concrete utility vault with a 9x9 steel access cover/lid. Employee 2, then walked behind employee 1, stepping onto the steel vault access cover/lid. The cover gave way, causing employee 2 and the steel vault cover to fall into the vault approximately 11 feet below. Employee 1 fell 8 feet, striking an existing pipeline valve located within the vault. Employee 2 was hospitalized for fractures to the ribs on the left side. Employee 1 did not require hospitalization.",1
"An employee was removing a cover on an 8-foot deep excavation when they fell into the excavation, resulting in a hip fracture.",1
An employee was walking behind a mini excavator when they were struck by the tracks and sustained a lower right leg laceration. The employee was hospitalized and had surgery.,1
"Employees were pulling up piping on a workover rig. The anchor on the piping got caught on the slip, then the slip got caught on the work floor, pulling it up while the employee was standing on it. When the work floor broke away from the slip, the flooring fell back down to the ground. This caused the employee to fall and sustain a right leg fracture that required hospitalization.",1
"An employee was working on a CNC machine when they tripped over wires and fell to the ground, resulting in a hip fracture.",1
"An employee was processing vehicles when a vehicle did not stop directly in front of his station. The employee stepped onto the vehicle track to retrieve paperwork from the vehicle. The employee then slipped on the track and fell approximately 5 feet onto the ground below, resulting in a facial laceration as well as a cheek bone fracture.",1
"An employee was checking machinery when their left index finger was caught in the rotating auger, amputating the fingertip.",0
An employee was climbing a portable ladder to remove a small panel cover from the exterior of an aircraft. The employee fell approximately 7 feet to the concrete floor below and sustained a skull fracture and brain hemorrhaging. The employee was hospitalized.,1
"An employee was performing work on a truck body at the entrance of a paint shop when the truck body moved on the conveying system, causing the employee to get struck by the open gear tunnel door. The employee was hospitalized for a lower back laceration that required surgery.",1
"An employee was preparing a grader ripper to be removed from the shop. As the employee pulled a pin to change the angle on the grader ripper, their finger struck a nearby chain, resulting in partial amputation of the right index finger.",0
"An employee was delivering product on his route. As the employee was lowering his lift gate to the trailer, his finger was caught in the liftgate chain, resulting in a fingertip amputation.",0
An employee was lifting an appliance when they sustained a herniated disc in their back.,1
"An employee was moving a scaffold plank off the ground that was covering a hole. When the employee picked up the plank, he fell 15 feet through the hole and sustained bruises.",1
"An employee was climbing a ladder while carrying 12-foot metal trims to the roof. As the top end of the metal rose above the parapet wall of the roof, a strong gust of wind spun the metal backward, causing the employee to lose his grip on the metal. The trims lacerated his left wrist, which required hospitalization and surgery.",1
"An employee was cleaning a centrifuge when he dropped a pair of pliers. The pliers struck a valve containing hot water, causing it to it discharge and strike him in the face. The employee sustained second-degree burns to the nose and right cheek.",1
An employee was operating a press when their fingers were caught and crushed in the machine. The employee sustained a partial amputation to two fingers on the left hand.,0
"Four employees were operating and overseeing a machine used to cut, re-roll, and patch fabrics and rubber. After the fabric in the machine was cut, smoothed out, and wound up, the injured employee raised the blade bar and began smoothing the fabric again. They then lowered the blade bar back into place, crushing their left thumb between the blade bar and the yellow resting block on the machine.",1
"An employee was clearing snow off her vehicle when she slipped and fell backward, striking her head on the concrete. The employee experienced a headache as well as back and shoulder pain.",1
An employee's hand was caught in an exhaust fan that circulates air in the range and filters out dust and lead particles from bullets. The employee sustained an amputation.,0
"An employee was working from a bucket truck. While transitioning out of the bucket, the employee fell 8 feet to the ground and sustained fractures of the hip and elbow as well as a lacerated liver.",1
"An employee was weaving wire to an excavator bucket when he slipped and fell 8 feet, striking his head on several objects before impacting the hard surface. The employee sustained head trauma and was hospitalized.",1
An employee was standing on a 4-foot ladder retrofitting a 277-volt light fixture when they were shocked. The employee sustained burns to both hands and a laceration to the forehead.,1
"On February 28, 2023, at approximately 2:00 PM, an employee was stacking product on the boxing line. Her gloves became caught on the chain on the underside of the line, pulling the employee's glove and finger into the sprocket. The employee sustained a partial amputation to the right ring finger.",0
An employee was troubleshooting line phases at a breaker box for electrical service when an arc flash occurred. The employee sustained burns to the face and upper arms.,1
"An employee was prying a board from the top of the unit while standing on the eighth step of a 10-foot ladder. The employee lost his balance and fell off the ladder, landing on his feet and sustaining foot fractures.",1
"An employee was walking outside to his car when he slipped on ice/slush and fell on the sidewalk. The employee went to get up and fell again, resulting in a right ankle/foot fracture.",1
"An employee was cleaning the beef blender/mixer machine when his hand became caught inside, resulting in a right hand amputation.",1
An employee was removing plastic shards from a machine using a compressed air hose. She stepped on the guardrail to gain better access to the accumulated plastic and her hair was caught in the rotating canopy drive shaft. The employee suffered hair loss and scalp damage. The machine was not guarded at the time.,1
"An employee was opening his trailer door when a tire bundle fell out and knocked the employee to the ground. The employee struck his head on the ground, resulting in a laceration to the back of the head, a concussion, and subdural hematoma. The employee was hospitalized.",1
"An employee was standing in front of a store when they noticed another employee showing signs of a medical emergency. The injured employee went to help the other employee and fell, resulting in a right hip injury.",1
An employee was carting material into a customer's store when they slipped and fell on water on the floor. The employee sustained a sprained ankle and was hospitalized.,1
"An employee was forming parts on a brake press. The employee was recreating and bending a long piece of metal that was on the bottom die and resting on the mat on the floor. When the die came down, the piece of metal became caught on the mat. As he reached down to remove it from the mat, he lost his balance and his left hand went into the press that then cycled. The press was stuck in the down position, resulting in a crush injury to the employee's left hand that required medical amputation of the little and ring fingers.",0
An employee was operating a milling machine and amputated his right index finger.,0
"An employee was working in the palletizing area, inspecting a right angle gear box when his left index finger was amputated at the middle knuckle by the timing belt of the gear box.",1
"On February 28, 2023, at approximately 7:30 PM, an employee went to save a part from a crashing forge when the forge came down on his right hand at the ring and little fingers. The employee's little finger was amputated.",1
"An employee was operating a spinner machine. As the employee went to place a part, the machine came down and crushed her right middle fingertip.",1
An employee was unjamming a machine with rollers when they sustained a right arm injury. The machine was guarded at the time.,1
An employee was walking into an establishment for a meeting when they slipped on ice and fell. The employee sustained torn knee ligaments that required surgery.,1
"An employee and a co-worker were completing rounds and went to check on the motor belt. The belt struck the employee's fingers, resulting in amputations to the middle and ring fingertips.",1
"An employee was working on a strapping machine. As he went to release tension on the straps, the machine amputated his right middle fingertip.",1
An employee was on a ladder removing metal from a building when they fell and sustained a foot fracture and possible pelvis fracture. The employee was hospitalized.,1
An employee was using a torch heat gun to shrink wrap connectors of a fuel sending unit when a gasoline flashover occurred. The employee was hospitalized for burns.,1
"On February 28, 2023, an employee was securing a piece of cargo on a bulk carrier ship with chain slings when the plate that holds the D-ring in place failed and struck him in the left side of his face and forehead. The employee sustained a laceration to the left side of his forehead, and a laceration to the left side of his nose.",1
An employee was installing a cable while on an A-frame ladder when they lost their balance and fell to the ground. The employee sustained a left-side skull fracture and rib fractures.,1
"An employee was using a shop vacuum to collect excess water on the floor generated from a core drill. The employee's sweatshirt was entangled in the rotating drill bit, resulting in a right forearm fracture.",1
"An employee was tightening a bolt on a bagger. As he went to move electrical conduit out of his way to get closer to the bolt, his hand went into another bagger. His right middle finger was caught on the motor belt/pulley, resulting in partial amputation.",1
An employee was on a portable ladder removing decorations when they lost their balance and fell approximately 7 feet to the ground. The employee sustained a knee fracture.,1
"A temporary employee was accessing the second level of a two-story residential home to conduct a roof inspection. The ladder was positioned on the first level and was extended up to the second level. The ladder shifted as she neared the second level, causing the employee to fall from the ladder and roll from the first level to the dirt ground. The employee sustained fractures of the cervical vertebrae, ribs, and humerus as well as a knee laceration.",1
"An employee was working on the camper that was in his bay when he slipped and fell, resulting in an ankle fracture. The employee was hospitalized and underwent surgery.",1
"An employee was loading a truck with elevator parts on a jack when the jack began to roll. As the employee went to stop the jack from rolling, his hand was pinned between the jack and truck, resulting in a right ring finger amputation above the first knuckle to the tip.",0
An employee was working on a converting machine when her right index finger was stapled by the machine.,1
"An employee was climbing a ladder. Upon reaching the second step, he slipped and fell onto his foot, resulting in a left ankle/foot injury.",1
"An employee was opening a scuttle on the third deck of an aircraft carrier. The scuttle quickly opened and pinched the employee's finger against a scaffold, resulting in a finger laceration and fractures.",1
"An employee was servicing an HVAC unit from a portable ladder when they fell approximately 8 feet, resulting in a dislocated shoulder and head contusions.",1
"An employee was working out of a semi-trailer with a set of stairs near the side access door. The employee backed up in the trailer and fell approximately 5 feet and 5 inches from the trailer lip to the ground, striking the stairs as they fell. The employee was hospitalized with two fractured ribs and two fractured bones in his right hand.",1
"An employee was climbing up an A-frame ladder to gain overhead access to install ship ventilation equipment. The employee's safety glasses bumped the sprinkler head diffuser, which knocked his glasses off and caused a laceration to his left lower eyelid and an injury to the sclera.",1
"An employee was descending a ladder when it collapsed, causing him to fall approximately 8 feet. The employee was hospitalized with a compound fracture to his left leg and a left wrist fracture.",1
"An employee was troubleshooting a sulfuric acid flow process after the acid was not getting through the system. The employee turned a valve and acid sprayed through a pinhole at a union that was at chest level. The employee suffered injuries from the sulfuric acid striking his chest, left arm, and face.",1
An employee had performed a 90-minute-long welding job on company equipment when they began to feel ill and were hospitalized for heat-related illness.,1
"An employee was helping a patient with daily care when they sustained a back injury, resulting in hospitalization.",1
"An employee was walking to their truck to begin their shift when they were struck by an automobile in the parking lot. They suffered multiple injuries, including a partial tear of the aorta, a broken ankle, a fractured sternum, and broken ribs.",1
"On March 1, 2023, at 2:34 a.m., a maintenance employee responded to a work order on a conveyor belt that was making noise from the line. The employee removed the belly pan from underneath the conveyor system to visualize and troubleshoot it, and then left to clean the pan. When the employee came back to the conveyor line, he saw some debris under the roller where he had removed the belly pan. He attempted to brush it off when his right hand became caught in-between the roller and the conveyor frame, resulting in abrasions to the top of his right hand.",1
"An employee was helping to set up skates to move a gondola. The bar slipped off the rack and the gondola leg fell and crushed the employee's right index finger, resulting in amputation at the first knuckle.",1
"An employee was attempting to remove a core chuck from a spent parent roll tissue core using a powered pallet jack with a chuck clamp attachment. The employee was pinned between a yellow post and the powered pallet jack, and was found lying on the floor. The employee was hospitalized with a fractured back.",1
"An employee was assisting in dismantling a scaffold when he lost his balance and fell backward 6 feet to the ground below, resulting in a back injury.",1
"On March 1, 2023, an employee working in the deli department was slicing onions using a mechanical slicer and amputated the tip of their right thumb.",0
"An employee was overlooking product that was being moved from a chain roller conveyor. The machine's frame is controlled by an air bag that lifts and lowers. The employee moved closer to the machine to get a better view of the product when the machine lowered and pinched his right foot, resulting in partial amputations of his big and index toes.",1
"An employee removed plywood that was covering a hole so that a crane could fly in a flange. The employee fell through the hole in the floor, contacting a flange approximately 41 inches below. The employee then fell approximately 47 inches, contacting an aluminum step stool, before falling approximately 19 inches to the ground. The employee was hospitalized with a spinal injury that required surgery.",1
Two employees were working on a perforating gun when it detonated in the shop. One employee suffered burns to the hands and hearing loss. The other employee's left hand was amputated and they sustained burns to the upper torso. Both employees were hospitalized.,1
"An employee was on a ladder repairing an overhead door when the door came down and struck the ladder, causing the employee to fall 8 feet to the floor. The employee sustained a fractured wrist and pelvis.",1
"An employee was cleaning a piece of equipment while standing near a tank that was being sanitized with hot water and chemicals. The tank built up pressure and the water and chemicals struck the employee's back, buttocks, and the back of their legs, resulting in burns.",1
"An employee was helping a customer at a deli counter. The employee retrieved food from the deli counter and turned around to weigh the product when they lost balance and fell to the ground, resulting in a fractured patella in their right knee.",1
"An employee was working in a parking lot adjacent to a construction work site when they slipped on ice and fell, resulting in head and neck injuries.",1
"An employee was lifting brass rebar material off a flatbed truck with a hoist and nylon straps when the material fell out of the sling and struck the employee, knocking them to the ground and pinning them against the truck. The employee suffered injuries to their hip/pelvic region, as well as abrasions to their right forearm and the back of their head.",1
"An employee was driving a forklift when their left foot became caught between a side panel on the forklift and a concrete pillar, resulting in a crush injury at the heel and an amputation.",1
"An employee was loading a trailer with composite mats when he noticed some snow on one of the mats. He walked to another truck to get a shovel when he slipped and fell on the icy ground. The employee suffered fractures to several cervical vertebrae, requiring hospitalization and surgery.",1
An employee was lifting a jug when they sustained a lower back injury.,1
"An employee was loading shingles onto a customer's roof when they fell approximately 7 feet to the ground below, resulting in an injury to their right elbow that required hospitalization.",1
An employee was retrieving a utensil that was going into the garbage disposal while cleaning dishes and sustained a partial amputation to two fingers on their right hand.,0
An employee was completing a quality assurance inspection on an airlock blade when their right middle and ring fingers were amputated at the first knuckle.,0
"An employee was moving a slide gate on a conveyor belt from the first to the third floor. While moving the slide gate, the gate tilted and pinned the employee to the wall and pipes. The employee suffered a fractured jaw and swelling to their face and head.",1
"An employee was climbing down a ladder when he slipped and fell, resulting in a fractured right leg.",1
"On March 1, 2023, an employee tripped and fell while moving equipment, resulting in a broken femur.",1
"An employee was pulling an aircraft container off a truck and onto a sorting platform when his foot slipped between the container and the rear of the truck. The container rolled into his lower right leg and he was pinned between the platform and the truck, resulting in a contusion to his lower right leg.",1
"An employee was assisting contractors with removing components from a machine. The employee had their right hand resting on the adjustable jib boom attachment of a forklift. A contractor pulled the adjustment pin and the boom slid down, pinching the employee's ring finger and resulting in an amputation at the first knuckle.",0
"An employee was walking into a building when he slipped on ice and fell to the ground, resulting in a fractured hip.",1
"An employee was stocking a tray of seafood in the seafood department when they lost balance and fell to the floor, resulting in a right hip fracture.",1
"An employee was walking to an event from her office when she slipped on ice on the sidewalk and fell, resulting in multiple injuries to her elbows that required hospitalization.",1
"An employee was helping to lower a rebar frame into a 5-foot-deep trench. The employee reached for a chain that had come loose from the rebar and the excavator bucket closed on the employee's left arm, crushing it. The employee sustained multiple fractures to their left arm.",1
"An employee was using a table saw when he slid on the floor and his left hand went under the saw's guard and contacted the blade, resulting in partial amputations to his index and middle fingers.",0
An employee slipped and fell to the floor after exiting the lab. The employee sustained a dislocated shoulder and broken elbow.,1
"An employee was operating a calender machine. The employee climbed on top of the machine and was struck by a bucket that is used to move rubber. They became pinned between the machine and the bucket, resulting in broken ribs and a fractured vertebra that required hospitalization.",1
"An employee was removing the dashboard from inside a vehicle. As he was using a pry tool to remove an interior trim panel, the trim came out suddenly and the pry tool struck the employee and cut his left eye.",1
"An employee was directing traffic on a deck. After giving the driver of a cargo van directions, the employee then turned his back to the vehicle and walked backward as it moved forward. The rear of the chassis struck the employee and knocked him to the ground, and he was then run over by the rear tires. The employee suffered broken bones, along with multiple other injuries.",1
"An employee was serving co-workers in the cafeteria when they slipped or tripped over an anti-fatigue mat and fell, striking their elbow and hip on the floor. The employee suffered a fractured hip.",1
"An employee was walking from his car to a back entrance when he slipped on a patch of ice and fell to the cement sidewalk, resulting in a broken left hip.",1
"An employee was lowering rods into an oil well when a clamp slipped and crushed their left thumb and index finger, resulting in amputation of the index finger.",1
"On March 2, 2023, an employee turned around while waiting tables when her leg gave out, causing her to fall to the floor and sustain a broken hip that required hospitalization.",1
"On March 2, 2023, at 3:00 a.m., an employee was removing a rain cover from the bucket of a truck. When he stepped up to the first step, he slipped and fell into the truck, resulting in a neck injury requiring surgery.",1
"An employee entered the protective cell and was removing the steel liners from the die. The employee stepped up to the die, placing his left hand on the die surface to steady himself. The die core slide moved forward and the employee's fingers were caught between the core slide and the core guide plate, resulting in partial amputations to the left middle and ring fingers.",0
"An employee was removing a pipe cap from a header on a riser station as part of an installation of a new fire and sprinkler system. The employee was utilizing a sprocket to remove a bolt on the pipe cap, which was 8 inches in diameter, 1/2 inch to 5/8 inch thick, and weighed 12.7 pounds. Because the valve had not cracked, the pipe cap was under pressure of approximately 80-115 psi. The pipe cap struck the employee and rendered them unconscious. The employee suffered brain bleeding and fractures to the skull, face, and nose that required hospitalization.",1
"On March 2, 2023, an employee was installing sheetrock/drywall in the interior of a building while working from a rolling scaffold. The employee fell off the scaffold approximately 6 feet to the concrete ground below, resulting in fractures to both hands and abrasions on the forehead and nose. The employee was hospitalized.",1
"On March 2, 2023, at approximately 4:30 a.m., an employee was involved in a physical altercation with a co-worker. The employee suffered head trauma that required hospitalization.",1
An employee sustained a heart attack while moving bags of soil weighing 25 to 50 pounds.,1
"An employee was gathering information on parts for an air-conditioning unit. The employee opened the door of the unit and their hand got caught in a belt within the unit, resulting in finger lacerations and a partial finger amputation.",0
"On March 2, 2023, an employee was using a hoist to lower a 700-pound casting onto a work surface. The employee's left hand was on the work surface when the casting lowered onto their thumb, resulting in a fingertip amputation.",0
An employee was working on a machine when his left hand was caught in it. That hand was fractured and burned.,1
"An employee was removing cured product from casts and staging it in the yard for future delivery when one of the outer casts opened up crooked. The employee placed his left hand on scaffolding for the outer cast. When the employee attempted to correct the crooked cast by pushing it, it came back together and trapped his middle finger. The employee sustained injuries to the skin and muscle.",1
"An employee was stepping off the bottom rung of a lowered scissor lift when his left foot slipped. He spun to the right, stumbled, and fell onto his right side on the concrete floor. He attempted to break his fall with his right hand and forearm, and his femur impacted directly onto his walkie talkie. The employee suffered a displaced fracture of his right femur and hip, as well as a fractured right radius.",1
"On March 2, 2023, an employee and co-workers were lifting and moving an 8-inch by 6-foot metal grate weighing no more than 150 pounds. As the team was lowering the grate, the employee felt a pop in their back, suffering a herniated disc.",1
"An employee was walking in a customer parking lot when he slipped on ice and fell, hitting the back of his head on the ground. The employee suffered a skull fracture and a herniated disk in his neck.",1
"An employee was working on wear strips for a silo safety gate at an asphalt plant. As the employee was moving the gate with a pry bar, it slid off its rollers and landed on the employee's hand. The employee suffered one finger amputation down to the middle knuckle, two finger amputations just below the fingernail, and a broken thumb.",1
"A bank employee was accessing her teller drawer from the vault when the vault door began to close. She attempted to hold it open with her left hand and the door closed on her left middle finger, resulting in a fingertip amputation.",0
"An employee was exiting the right side of a forklift to change its propane tank. The employee tripped while exiting and their finger became caught between the propane storage cage door and the frame of the forklift, resulting in an amputation of the little finger down to the last knuckle.",1
"An employee was holding a 2x4 as it was being anchored in for a railing system. After the 2x4 was anchored, the employee lost his balance and fell 5 feet 9 inches to the ground, resulting in a left ankle injury that required hospitalization.",1
An employee was using an air gun to blow cotton out of a textile machine when the machine pulled the employee's shirt and left arm into the machine gears and roller. The employee's left little finger was amputated and they sustained a severe injury to the right forearm.,0
An employee was changing filters on the hopper of a wheel blasting machine. He was at the top of the stairs while using a crowbar when he lost his footing and fell to the floor. He sustained a fractured left foot.,1
"Two employees were working on an articulating boom truck to inspect the roof of a food center warehouse. The basket came in close proximity to high-voltage powerlines, which caused an arc that electrocuted the employees. One employee suffered minor electrical burns. The second employee suffered third and fourth degree burns to their arms, neck, and back and was hospitalized.",1
"An employee was walking out of a meeting room when they fell to their knees and then struck their face on the floor, resulting in a broken nose.",1
"An employee was working near a pallet when a roll of material moved from the pallet. The employee went to stop it from rolling when it pinched the employee's left little finger against a machine, resulting in a fingertip amputation.",0
"An employee was moving 2x10 boards in the sorter bay using a 6-foot, 2-inch pike pole. Another board fell into the bin and struck one end of the pike pole, causing the pike pole to pivot on the handrail. The opposite end went upward and struck the employee's head behind his right ear. The employee sustained a concussion and an intracranial hemorrhage.",1
"An employee was using a crank and cable to lower a light tower due to windy conditions. The light shaft became hung up and released the tension in the cable, which wrapped around the employee's left hand, resulting in amputations of three fingers.",1
"An employee was performing interior and exterior pest control services at a customer's home when they fell through the attic and sustained injuries to the arm, ribs, and chest.",1
"An employee was using a power saw on a 2x4 to build shelves when the saw hit a knot and kicked back, causing the employee lacerate his left palm.",1
"An employee was in a wooden basket on a high-reach forklift. While being raised, the basket fell off the forks. The employee and the basket landed on the ground. The employee was hospitalized with two broken ankles and a compressed spine.",1
"An employee was on a step stool reaching to retrieve hamburger meat from the top shelf inside the cooler. The employee lost balance on the third step and fell to the floor of the cooler, resulting in a right hip fracture.",1
"On March 3, 2023, an employee went into a machine to check a part when the machine activated, causing the employee to stumble and fall. The employee then sustained a fracture and lacerations to the left leg that required hospitalization.",1
"An employee was using a circular saw to cut a wooden shelf when the saw contacted the end of their left middle finger, resulting in a fingertip amputation.",0
An employee was servicing an HVAC system when they were bit on the right shin by a water moccasin.,1
"An employee was operating a deli slicer when they noticed a piece of cheese was stuck. The employee's hand contacted the blade, resulting in an amputation to the right thumb.",0
An employee was guiding material into a punch press. The employee's left hand was caught by the press and his left index finger was amputated.,0
"An employee was performing maintenance on a roll-up door that had four bolts removed from an L-bracket. Two still-installed bolts sheared off while under pressure, causing the employee's right hand to become caught between the bracket and a chain sprocket. The employee suffered an amputation to their middle finger.",0
An employee was walking backward to allow another employee to pass when he tripped and fell on the ground sustaining a fractured hip.,1
"An employee was using an overhead crane to move a 6,000-pound steel bar. As the bar was lifted, a bar behind it fell, hitting the bar that the employee was moving. That bar then swung and struck him in the left leg. The bar that fell also struck the employee's right leg. The right leg was amputated.",1
"An employee was taking items to their vehicle when they fell to the pavement, resulting in a broken right femur that required hospitalization.",1
"An employee was turning the stompers in preparation to skid the rig. While adjusting the stomper, the guide alignment plate fell off the sector plate, striking the employee's right ring finger. The finger was amputated to the first knuckle.",0
"An employee was walking to her car in the parking lot at the end of the day. She went to turn and her shoe got stuck, causing her to fall to the ground. The employee was hospitalized with a hip fracture.",1
"An employee was opening a gate when the wind caught the gate and closed on his hand, resulting in a finger fracture and amputation.",0
"An employee was removing a pipe from the clean-in-place line. Once the pipe was removed, hot water and possibly chemicals came out of the pipe and burned the employee.",1
"On March 3, 2023, an employee was in the storage room and stepped up on a step ladder to reach a product on the top shelf when she lost her balance and fell backward, striking the ground. The employee sustained a concussion.",1
"An employee was unjamming a box in a case sealer machine when their finger contacted the drive belt and pulley, resulting in amputation to the right middle finger.",1
"On March 3, 2023, at 9:15 AM, a maintenance employee was using an 8-foot step ladder to hang plastic in the packout area to keep rain water from dripping in production areas. They fell an unknown distance from the ladder to the production floor. The employee sustained a fractured right wrist and multiple fractures on the right side of their head/face including a fractured orbital bone.",1
"An employee was uncrating glass panes using a handheld cordless saw. As the employee cut the wood holding the glass, six glass panes fell on top of him, resulting in fractures to the pelvis, tibia, and fibula as well as a shoulder dislocation.",1
An employee was handling fentanyl and lost consciousness.,1
An employee was using a tagline to guide a suspended concrete bucket down a walkway when they stepped off the walkway and fell 4 feet into an inspection pit. The employee sustained a fractured right femur.,1
An employee was operating a forklift in a warehouse when it began to slide. The forklift was unable to gain traction on the floor that was wet from rain and it slid out of the building and onto the employee's foot. The employee sustained a crush injury to the right foot.,1
"On March 3, 2023, at 9:15 AM, an employee was inspecting delivery trucks. As the doors were being opened, a gust of wind caused a door to swing open and strike the employee's head while they were filling out paperwork. The employee fell to the ground, striking the back of their head, arm, and elbow on the ground. The employee was hospitalized with a concussion and fractured tailbone.",1
"On March 3, 2023, at approximately 9:30 AM, two employees were utilizing a forklift to move a tractor tire. Employee 1 was operating the forklift, while employee 2 balanced the tire on the forks. The tire fell off the forks and pinned employee 2 against the tire of another tractor. Employee 2 was hospitalized with a fractured neck.",1
"An employee was supervising the production of mailbox parts when the folding worktable collapsed. The employee tried to catch the table and her right index fingertip was caught between the tabletop and the metal cart beneath it, resulting in amputation.",0
An employee was unjamming a translicer on a trim line when the blade amputated four fingers from their right hand. The machine was not guarded at the time of the incident.,1
"An employee was wrapping product with 5,000 pounds of wire reeling while the product was on a racking system approximately 10 feet above the ground. The wire reeling fell off the racks and onto the employee's right thumb, resulting in a partial amputation.",0
An employee was connecting a transportation dolly to three other dollies to make a train of four dollies. The tongue of a dolly went under another dolly. The employee's fingers remained on the handle and the dolly continued forward. The employee's middle finger was caught between the handle and the connecting pin guard resulting in amputation above the first knuckle.,0
"An employee was operating a high-pressure paint pump, applying wall sealer to a cement wall in a basin at a sewer plant. While unplugging the spray gun, it injected the wall sealer chemical into his left hand. The employee required surgery.",1
"An employee was walking across a rail yard toward an office building when a bee flew into his eye and stung him. The employee's eye was irritated and swollen, resulting in hospitalization.",1
An employee was using a forklift to move a load of sheetrock. He reached forward to adjust a spacer and the load dropped while the employee's hand was beneath it resulting in an amputation to the right index fingertip.,0
"An employee was clearing out the line after removing water from a railcar when hot water splashed onto his face, resulting in facial burns.",1
"Employees were repairing a utility pole that had been hit by a vehicle. The pole rolled off of a stand and struck one of the employees, fracturing his pelvis.",1
An employee was hiking when they fell to the ground and sustained an ankle fracture and shoulder injury.,1
"An employee was on a ladder inspecting a garage door when the chain disconnected. The garage door landed on him, resulting in a lower back injury.",1
"An employee was exiting a ski lift and instructing students when she fell and her ski did not release, resulting in a left tibial plateau fracture.",1
An employee was walking away from a home delivery when they slipped in mud and fell to the ground. The employee was hospitalized with a broken ankle and required surgery.,1
"An employee was in a manlift getting ready to repair a broken airline. He stepped back to extend the platform on the manlift and a ceiling fan blade struck the back of his arm, causing a laceration just above the elbow. The employee was hospitalized.",1
An employee was getting off a bulldozer when he lost his footing and fell between the body and the blade of the vehicle. The employee sustained a head and neck injury.,1
An employee was driving a forklift to a pickup location in an aisle. The forklift collided with a warehouse rack/pole and the employee sustained a left pelvic fracture. She was hospitalized.,1
"An employee was walking through the plant when she stepped on a broken plastic pallet and fell, resulting in a hip fracture.",1
An employee fell off a shopping cart while restocking shelves. Her left ankle twisted and her left fibula was fractured.,1
"An employee was lowering dock levelers when he slipped and fell on the same level, sustaining a broken right ankle.",1
An employee was washing a company truck at a car wash when a person that had just robbed a liquor store stabbed the employee in the back with a knife. The employee was hospitalized for lacerations.,1
An employee slipped on ice in a parking lot and suffered a broken femur.,1
"On March 5, 2023, an employee was sitting with a client in a hospital when the client became aggravated and pushed the her. She fell backward, hitting her head and back on the ground and suffering head and back injuries. She was hospitalized.",1
"An employee slipped on a wet, newly cleaned floor, fell, and sustained three fractures to her pelvis.",1
An employee was working as a bartender when they slipped and fell on the wet floor resulting in injuries to the hip and shoulder.,1
"An employee was checking pool chemicals when chlorine and muriatic acid were mixed together, creating chlorine gas. The employee inhaled the gas and began coughing. The employee was hospitalized for irritation of the respiratory tract.",1
An employee had arrived on site and was walking to a building when she slipped on ice and fell on concrete steps. The employee was hospitalized with a broken hip.,1
"An employee was using a forklift to move two flange fixtures that are used in a CNC machine. As the employee was adjusting the fixture so that it was flat on the ground, the fixture shifted on the guide rods, catching his finger between the top guide rod nut and top metal clamp bar. The employee sustained an amputation of the left little fingertip.",0
An employee was climbing a ladder to access a roof when they fell 12 feet. The employee was hospitalized for a rib fracture.,1
"An employee was checking to see if the feed throat was clogged on an injection molding press. When the employee slid the hopper back, their left middle fingertip was pinched by the hopper and amputated.",1
"An employee was running a line of cast iron bar when liquid iron spilled onto the employee's feet, resulting in burns to the bottom of the left foot and heel.",1
"An employee was running toward a leaking hose when he tripped and fell to the ground, resulting in an arm fracture.",1
"An employee was climbing into a trailer to retrieve trash prior to backing the trailer up to a loading dock. The employee reached the trailer floor, stepped inside, and then lost his balance and fell backward 5 feet onto the pavement. He sustained a fractured pelvis and femur.",1
"An employee was dumping baked-goods from a bin onto a conveyor. The employee reached for a pan and his finger was pinched in the belt, resulting in amputation of the left middle digit.",0
"An employee was using a pressure washer to blast the coating of a vessel when the pressure washer contacted his leg, resulting in a laceration and water injection into the skin.",1
An employee was removing a nut from a bolt with a torque gun. The employee was holding the torque gun with his left hand and went to move the actuating arm and the chain when his right index finger was pinched between the actuating arm and the nut. The fingertip was amputated.,0
"An employee was coming back from their break and crossing a path when they were struck by a forklift, resulting in a right leg injury that required hospitalization.",1
"An employee was cleaning pulp stock using a fire hose. The employee's hard hat fell off and the employee reached to grab it, causing them to fall off the working platform into the pulp stock. The employee sustained second-degree burns.",1
An employee was walking to her office when she tripped and fell onto the floor and sustained a shoulder fracture.,1
"A commercial waste collection driver was servicing a 4-yard, front-end-load metal container on wheels. As he pushed the container back into the corral, the container bumped into the bollard and crushed the employee's hand. The employee sustained a partial amputation to the middle fingertip.",0
"An employee was carrying a case of water in a box with ice while walking down the stairs. The employee missed a step and fell down the stairs, sustaining a concussion.",1
"On March 6, 2023, at approximately 7:45 AM, an employee was emptying a waste tank in a cheese manufacturing facility when they lost consciousness due to hydrogen sulfide vapor.",1
"An employee was replacing bands on the conveyor in the packaging area when their right middle finger was caught in the conveyor, resulting in an amputation of the fingertip.",0
"An employee was cleaning the lobby of the restaurant when her hand was caught in a door, resulting in a fractured right hand and middle finger.",1
An employee was performing fire caulking tasks when they fell off a ladder onto the ground. They sustained left shin and right foot fractures.,1
An employee was using a 2-foot fiberglass pole pruner to cut bushes when it made contact with a 7200kV power line. The employee was hospitalized with electrical burns.,1
An employee was operating a bender when his left thumb was caught between the bender's post and an I-beam being bent. The thumb was fractured resulting in hospitalization.,1
"On March 6, 2023, an employee was placing lids on bowls at the production line when their left hand was wedged in the conveyor belt. The employee sustained a partial amputation to the left thumb.",0
An employee was using a forklift to move metal rod bundles that were 31 feet in length and weighed 980 pounds. The forklift tipped over and caught the employee between it and the ground. The employee sustained a right leg fracture.,1
"An employee was climbing a fixed ladder to access a roof when he lost his footing and fell from the ladder to the concrete floor. The employee sustained fractures to the spine, femur, pelvis, and knee and was hospitalized.",1
"A temporary employee was removing a bagel from the conveyor on a slicing machine when her right hand and arm were pulled into the rollers, resulting in multiple fractures.",1
"An employee had just loaded a forklift onto a trailer and was removing tie-down straps from the trailer when the forklift tipped. The employee then fell and sustained fractures of the nose, leg, and ankle, as well as head lacerations.",1
An employee was inspecting an existing roof structure due to suspected rot when they fell through a location of rotted roof deck and struck his torso on a roof truss before falling to the ground. The employee sustained three rib fractures and a liver puncture.,1
An employee was transferring acid when he sustained chemical burns to his shoulder.,1
An employee was operating an electric pallet jack to move empty pallets around the facility when the vehicle struck an angle iron barricade in the warehouse. The employee sustained rib fractures.,1
An employee was gathering wood that was cut by the end trimming machine and stacking it on a nearby pallet when their finger was caught in a chain and sprocket of a wood-conveying machine. The employee sustained a left index finger amputation from the tip to below the first joint.,0
An employee was unscrambling wood pieces when he lost his balance and fell on the catwalk. The employee sustained lacerations to the shin and knee.,1
An employee was transiting down the ships stairs leading into a winch room aboard a dredging ship. The employee fell down the stairs and impacted a vertical pipe that was installed adjacent to the bottom of the stairs. The left side of the employee’s midsection was impacted causing internal injury to the stomach and diaphragm.,1
An employee was securing a tarp to a flat bed trailer using a bungee strap. The strap broke causing the employee to fall from the trailer to the ground. The employee struck his head on the ground and sustained a skull fracture.,1
"An employee was participating in work over rig operations. As they were tying ahead, they were caught in the spool and sustained fractures of the tibia, fibula, scapula, and pelvis.",1
An employee was lubricating a forming machine when hot bottles fell off the machine. A bottle contacted the employee's left leg and ignited their flame retardant pants. The employee's left leg was burned from the thigh to just below the knee.,1
"An employee was walking next to a forklift when the forklift backed into them, resulting in a fractured leg.",1
"At about 1:30 p.m. on March 7, 2023, an employee was clearing a material jam in metal-bending equipment. The equipment activated while the employee's right hand was inside it, resulting in an amputation to the index finger from the nail bed to the first knuckle. The equipment's side guard had been removed at the time of the incident.",0
"An employee was delivering fuel into tanks at a customer site when a 3-inch cap from the load line of the fuel truck struck the employee's right eye, resulting in the loss of that eye.",1
An employee parked a forklift and stepped out to operate a trash compactor. The forklift then rolled back and pinned the employee's right leg against the trash compactor. The employee was hospitalized with a broken bone or muscle tear.,1
"An employee was grabbing his personal belongings from a supply shelf in a backroom. The shelf was above a pallet of butcher wrap paper that had a zip tie on it. The employee's foot became caught in the zip tie, causing him to lose his balance and fall onto the floor on his left side. The employee sustained a hip fracture and was hospitalized.",1
"An employee was dismantling a fabricated frame scaffold when they fell approximately 20 feet to the ground, resulting in facial fractures and contusions.",1
An employee was preparing to remove parts from a CNC milling machine. He was using a combination wrench to loosen the hold down clamps when his hand slipped and his supporting arm contacted a sharp surface on the work piece he had just created. The employee sustained a laceration on his left wrist about an inch below the palm of his hand.,1
An employee was cleaning a feeder for a product switch when their left thumb and index finger were amputated.,1
"An employee was removing a counter top when their finger was caught between the counter top and wall, resulting in a fingertip amputation.",0
"An employee was observing a drill operator repositioning a drill rig. The employee was struck by the mast of the drill and pinned against a wall, resulting in cervical and lumbar spine injuries.",1
"Employees were trying to set a 25-foot ladder beside a furnace. They could not get it into place on their first attempt, so they moved the telescoping forklift they were using to another position. During the second attempt, the boom/forks caught on a valve/pipe on a steam-containing cooling line. The motion of the lift broke the line; steam was released, causing second-degree burns to one employee's right forearm, right thigh, stomach, and abdomen.",1
"An employee was installing a punch die in the press during a setup procedure. Upon inserting the die, the employee checked the placement of the locking device by grabbing the die with his left hand. The die fell and crushed his left middle finger, resulting in an amputation.",0
"On March 7, 2023, an employee was working to move a plastic pallet that had gotten stuck on a staging rack. The employee slipped. While getting up, his hand was on a roller and the pallet pinched his right middle finger against the roller. The fingertip was amputated.",0
"An employee was working on a transformer, removing the cover inside a cabinet, when an arc flash occurred. The employee sustained second-degree burns to his neck and ears requiring hospitalization.",1
"On 3/07/2023, at 4:30 PM, an employee was walking through the driver’s entrance door to get change for her register when her foot got caught on a floor mat just inside the door causing her to fall to the ground. The employee was hospitalized with a fractured hip.",1
"An employee was cutting a piece of a utility pole. The employee climbed the adjacent new pole with pole climbers and used a chain saw to make the cut. The saw kicked back, resulting in lacerations to the employee's arm and chest that required hospitalization and surgery.",1
An employee was selecting cases to place on his pallet using an electric pallet jack when a nearby pallet jack backed into him. The employee sustained a right ankle fracture.,1
An employee was cleaning printing plates when three fingers on their left hand were amputated. The employee was hospitalized and underwent surgery.,0
"An employee was sprayed with molten plastic that released from an extruder machine during the purging process. The employee sustained second-and third-degree burns to the neck, shoulders, and arms.",1
An employee fell on the floor while walking to return some glasses. The employee sustained a hip contusion that required surgery.,1
"An employee was operating a forklift when it backed into a rack. A box then split open, causing parts to fall onto the employee; they sustained injuries to the hip and/or pelvis.",1
An employee was walking down stairs and fell onto her left leg and hip. The employee sustained a left femur fracture.,1
"An employee was on a flatbed truck unloading tools and supplies when he fell from the flatbed onto the ground, resulting in a fracture.",1
"An employee was running a press machine when the press came down on his thumb, resulting in a right thumb fracture and partial amputation.",0
"An employee was scribing trim molding to be installed. The molding saw severely lacerated two of the employee's fingertips, which had to be medically amputated to the first knuckle.",0
"An employee was patching sheet rock holes inside of a unit while on an 8-foot, A-frame ladder. The employee fell from the ladder and sustained a concussion and three compression fractures of the thoracic and lumbar vertebrae.",1
"An employee was replacing the casing and pistons on an elevator. While descending the fixed ladder inside the elevator pit, he slipped on one of the rungs and fell 2 feet to the floor. He landed on the sides of his feet causing his ankles to roll. He sustained fractures to the ankles.",1
An employee was exiting the office out of the main entrance to the second floor when he fell onto the carpeted floor outside the office. The employee sustained a fractured right hip and an injury to the right shoulder.,1
"An employee was changing a 100-amp circuit breaker. After the older breaker had been removed and the new one was fully seated, electricity arced and burned the employee's left hand and right forearm.",1
An employee was clearing debris around the log simulator when they were struck in the lower back by a part of the simulator. The employee sustained vertebrae fractures.,1
"An employee was replacing forks on a forklift. As he was setting a fork in place, his left ring finger became caught between the fork and the mast. The employee went to pull his finger out and his fingertip was amputated; the injury required hospitalization.",1
"An employee was driving a utility tractor rig (UTR) truck with a container attached, when their UTR struck the trailer of another truck. The employee was hospitalized with fractures to his left knee and right toe.",1
"An employee was operating a reach truck and going down an aisle to put away pallets from the inbound dock. The vehicle collided with a pallet rack, causing the employee to fall out of the driver's cage and onto the floor. The employee sustained a fractured pelvis.",1
"An employee was conducting patrol enforcement activities on an all-terrain vehicle (ATV). While turning on a caliche dirt road, the ATV struck a rut and rolled onto its side. The employee was thrown from the vehicle. The employee sustained a fractured upper right arm that required surgery.",1
"An employee was holding a door open when their right index finger was pinched in the door hinge, resulting in a fingertip amputation.",0
An employee was performing roofing work at a residence on 3/7/2023 at 11:30 AM. The employee fell to the ground and was hospitalized with a broken leg.,1
"An employee was using a band saw to cut meat when their right hand slipped, resulting in a laceration to the middle finger.",1
An employee was taking pictures of algae and went to use the ladder when they fell 10 feet onto the cement. The employee sustained a broken leg that required hospitalization.,1
"An employee was feeding a corrugated flat sheet of metal into a machine to be rolled when their glove was caught in the machine, resulting in the amputation of fingers.",0
An employee was feeding plastic into the rollers of a stretch machine. Her left index finger became caught in the roller and was amputated at the tip.,0
A temporary employee was collecting yard waste and loading it into a packer when the blade on the hopper lacerated her left hand.,1
"An employee was exiting the main door on the east side of the building when he was struck by a powered-industrial vehicle carrying two metal tubs weighing about 500 pounds each. The employee sustained a left thumb, right shoulder, and left knee injury.",1
"An employee was using a weed trimmer with a metal blade to cut brush. The blade struck a rock and broke; fragments of it struck the employee's right leg, causing a laceration and a broken bone.",1
"An employee was setting up an anodizing line and adding sulfuric acid via a pipe delivery system used in the anodizing tanks. When the employee opened the delivery valve on the sulfuric acid piping system, a valve fitting failed, causing sulfuric acid to spray onto the employee. They sustained chemical burns to the chest, stomach, lower neck, arm, and leg.",1
An employee had been assisting customers preparing tickets and boarding passes at a gate. The employee then walked on the concourse toward the break room and fell on a flat surface. She landed on her right elbow causing a fracture.,1
"An employee was manually rotating a conveyor to help grease a bearing. His left hand got stuck between the belt and a sheave, resulting in a laceration to the middle finger and an amputation to the ring fingertip.",0
"An employee was rolling a piece of sheet metal on a roller when their gloves got caught in the roller, pulling the employee's right hand into the machine. Skin was removed from two fingers, and the middle finger was amputated at the first knuckle.",0
An employee was taking a break. He went to grab a chair and the cushion of the chair slipped off causing the employee to fall to the floor. The employee sustained a femur fracture and a torn thigh muscle.,1
An employee was adjusting a machine when their right index finger was pinched between a gear and a drive chain. The employee sustained an amputation of the flesh on their fingertip.,0
An employee was walking near the de-palletizer machine when they fell to the concrete ground and sustained a broken left hip. The employee later found that a piece of glass was stuck in their boot that caused them to fall.,1
"Two employees were cleaning the end of an 8-inch PVC pipe (approximately 15 feet long) to set it in a manhole using a crowbar. As the injured employee pushed the pipe in, three of his left-hand fingers were pinched, resulting in an injury that required surgery.",1
A well tender was working on a gas pipeline when gas ignited. The employee sustained burns to their face.,1
An employee was troubleshooting the tempering line to determine why the belt was rubbing when their right index finger was pulled in and caught between the belt and gear. The right index finger was degloved and later amputated. The machine was not guarded at the time.,0
"An employee was making adjustments to a vertical bucket conveyor. They were standing at the inspection window, tracking the path of the belt. The belt walked to the side, causing buckets to strike a patch (a steel plate approximately 13 by 6 inches) that was riveted to the top of the conveyor leg housing. The impact ripped the patch from the rivets and the patch fell approximately 80 feet to the ground, striking the employee's head. They sustained a skull fracture.",1
An employee was a climbing a 16-foot fixed ladder to access the roof when he fell 10-12 feet to the landing beneath the ladder. The employee sustained a right femur fracture and left ankle fracture.,1
An employee was setting up a CNC bender to fabricate a new product prototype. A piece of tubing was drawn back into the bending machine and pulled the employee's right hand in with it. His fingertip was caught between the bending and damping dies and amputated.,0
An employee was using a pallet jack to move products in the back of a delivery truck. The employee pushed the pallet jack into a pallet of stretch wrap film but the pallet jack became stuck and the employee's momentum carried him forward and he struck his head on the pallet. The employee lost consciousness and sustained a concussion.,1
An employee was grinding a piece of metal using a grinding wheel. The wheel pulled the metal in and the distal tuft of the employee's left thumb was amputated.,0
An employee was participating in a ski training when they fell and were hospitalized for a separated shoulder.,1
"An employee was assisting with unjamming a citrus bin in the bin filler de-stacker machine when they sustained a left foot contusion, resulting in the amputation of two toes.",0
The injured employee fell off a riding pallet jack and sustained a broken ankle.,1
An employee was climbing a portable ladder to inspect the top of a water tank when the ladder and the employee fell to the ground. The employee sustained a fractured left arm and an injury to the left elbow.,1
"An employee was closing a floor electrical box when it slammed on the employee's right little finger, resulting in amputation.",0
A maintenance employee was unjamming a trolley basket when the divider was activated and partially amputated their left ring fingertip.,0
"A driver was outside a truck waiting for the trailer to be unloaded. The load was lightened and the trailer rolled back, causing the driver to become caught between the tractor and trailer. The driver sustained rib fractures and a chest injury.",1
"An employee was working as a flagger at a road construction site when they were struck by a vehicle, resulting in a broken leg.",1
"A maintenance employee was welding an attachment to the bucket of an excavator. The piston holding the bucket disengaged, causing the metal bucket to fall and land on the employee's foot, crushing and lacerating it.",1
An employee was operating an automated shank saw and was removing fat caught in the wheelhouse and small conveyor. The employee opened the wheelhouse assembly and went to remove the fat using a knife when the knife was caught. The employee's hand was pulled in and she sustained an amputation to the end of her right index finger.,1
An employee was using a 4-inch grinder to cut a series of tack welds loose. The grinder kicked back and lacerated his left wrist.,1
"A crew was using a crane to assemble another crane when an employee tripped over an incline and lost his balance. The employee fell 6-7 feet from the decking to the asphalt surface below, resulting in fractures of the right arm above the elbow and left wrist. The employee also experienced swelling to the top of the left foot.",1
An employee was collecting shopping carts in the store parking lot when they were struck by a customer's vehicle. The employee sustained two fractures of the left ankle.,1
"An employee was assisting with offloading merchandise from a truck when he lost his balance and fell from the loading dock to the ground, resulting in rib fractures.",1
An employee was helping to position a horse for cervical X-rays. The employee was kicked in the face by the horse and was hospitalized with facial injuries and head trauma.,1
"An employee was loading a metal cart full of laundry mats onto a delivery truck. While maneuvering the cart into position to secure it to the truck, the employee's left hand got caught between the cart and the truck bracket resulting in amputation of their left index fingertip.",0
"An employee was using a welding machine. As the employee moved the coupler over to the correct location, the projection welder actuated, coming down on their right hand. The employee sustained a right index finger fracture and a partial amputation of the middle finger.",0
An employee was exiting a tractor trailer in the yard area when he missed the last step and fell to the ground sustaining a broken right femur.,1
"An employee was cooking at a flat top grill in front of customers. As the employee poured alcohol to produce flames, the bottle of alcohol became too hot and exploded. The employee was covered in flames and sustained third-degree burns to the torso.",1
"An employee was helping to install fiber cable on a water tower. The employee was descending the ladder from the water tower when he fell approximately 20 feet to the ground, resulting in a fractured right arm.",1
"An employee fell while placing a cellular phone onto a shelf, landing on the floor and suffering a dislocated hip.",1
An employee was using an 8-foot step ladder to secure conduit at the ceiling level when they fell to the ground and sustained an arm fracture near the elbow.,1
"An employee was feeding steel lath into a roll mill machine. The machine caught the employee's hand, resulting in a degloving injury.",1
"An employee was on a roof preparing to attach an anchor when he fell approximately 20 feet to the ground, resulting in injury to his back and nerves.",1
"On March 9, 2023, an employee was assembling manifolds. While pushing an end fitting into the hose of an automatic pushing machine, the employee suffered an amputation to the tip of the right index finger.",0
An employee was clearing a twisted wire from a wire box machine when the wire amputated their right ring fingertip.,0
An employee was cutting copper wire with a shear when they sustained an amputation to their right ring fingertip.,0
"Employees were unloading 20-foot steel bars and transporting them to the steel yard using a telehandler. The injured employee was walking next to the vehicle when his left foot was run over, resulting in a left foot and ankle fracture.",1
"An employee opened the hatch on an oil tank. The exposure to hydrogen sulfide and other gases caused the employee to become ill, dizzy, and lightheaded; the employee was hospitalized.",1
An employee was opening a ratchet strap that was holding together a bundle of steel tubing. The strap gave way and the steel tubing fell and struck the employee's leg. The employee's leg was broken in two places and they were hospitalized.,1
"Employees were installing a removable jack onto the front of a trailer. The injured employee was aligning the bolt holes as the jack was being pushed into position. As the jack slid into place, his right index fingertip was amputated.",0
An employee was walking toward loading docks when she tripped on a loose shipping strap and fell onto her left arm and shoulder.,1
"Five employees were searching an inmate's property when they were assaulted by the inmate. One employee was hospitalized with a broken ankle, which required surgery.",1
An employee was cutting lettuce with a food slicer in preparation for an event when they sustained a partial amputation of the right thumb.,0
"An employee was removing banding from a 10-inch by 10-inch bundle of square steel tubing that was stacked on top of cribbing. The tubing rolled off the cribbing and struck the employee's right leg, resulting in a fibula fracture.",1
"On March 9, 2023, an employee was helping to disassemble a platform by removing the hardware. The employee's left ring finger became caught between the assembly channel and the cup square bolt, resulting in a fingertip amputation.",0
An employee was opening the door of a baking oven to remove customer parts when their little fingertip was amputated by the door's latching mechanism.,0
An employee was conducting a ski lesson when another skier collided with the instructor. The employee sustained internal bleeding.,1
"An employee was using a boom lift to load steel girts onto a belt. The girts were in a tangle, and when the employee tried to fix them they came tumbling down onto the employee's right hand. The employee's index and middle fingers were amputated.",0
An employee's hand was caught between a crane block pulley and a cable. The employee sustained an amputation.,1
"An employee was standing on a baker scaffold approximately 6 feet high and using a trowel to apply synthetic stucco. The board (platform) became soft when the employee stepped on it. He then jumped back and struck the scaffold railing, causing the scaffold to tilt over and fall to the ground. The employee landed on the concrete sidewalk and sustained a fractured elbow and laceration to the back of the right arm.",1
"An employee was wrapping a pallet to be shipped. As he was walking around the pallet with a roll of shrink wrap, a forklift ran over his right heel and broke it.",1
"An employee was getting ready for work operations when a large gust of wind got under a containment, which then knocked the employee into a pipe rack. The employee suffered a damaged artery in the right leg, with swelling and internal bleeding.",1
"An employee was on an extension ladder that was resting on a metal container. While trying to remove lumber from the top of the container, he fell off the ladder. He suffered a broken ankle.",1
"An employee was training new operators on a mechanical punch press. As the employee reached for a bolt inside the die, the press cycled and both their hands were caught/crushed in the press.",1
"An employee was closing a lift gate on a box truck. The gate slipped and pinched the employee's left ring finger, resulting in multiple fractures.",1
"An employee was framing roof sections when the fell from the roof to the ground, resulting in rib fractures and contusions. The employee was hospitalized.",1
"An employee was tying rebars and retrieving more tie-wire when a 12-foot-tall masonry wall collapsed onto the employee. The employee sustained multiple injuries to the shoulder, foot, and back.",1
An employee fell while cleaning around a counter. The employee suffered a broken hip.,1
An employee was conducting welding maintenance on the rotor of the shredder mill machine when they fell backward approximately 10 feet to the conveyor belt below. The employee sustained a pelvis fracture.,1
An employee was involved in a physical altercation with an aggravated customer. The employee suffered a concussion.,1
"An employee was unjamming a conveyor drive sprocket when their right middle finger was caught in the chain, resulting in amputation of the fingertip. The machine was not locked out/tagged out at the time.",0
An employee was being trained on how to clean equipment when the fitting to connect two tanks leaked cleaning solution onto the employee's back. The employee sustained chemical burns.,1
An employee was walking down a flight of interior steps when they fell to the ground and sustained a forehead laceration. The employee was hospitalized.,1
"An employee was on the sorter to modify airlines. The photo-eye was activated and the lumber arm dropped down a few inches. As the wood dropped, the employee went to catch himself and grabbed a horizontal cable which then moved, pulling their hand into the spool. His left index fingertip was amputated.",0
"An employee was adding insulation to ductwork from a 10-foot, A-frame ladder. The employee was descending the ladder when they lost their footing and fell approximately 8 feet to the ground, resulting in a right wrist fracture.",1
"The injured employee was cleaning up and needed to have the trackhoe moved. Another employee moved the trackhoe. When the bucket was lifted, the injured employee's hand was crushed between the bucket and a pipe. The employee sustained a laceration between the middle and ring fingers that required hospitalization.",1
"An employee was dumping a self-tilting trash hopper into a compactor from a forklift. The employee reached up with his right hand to grab the mechanical lever to dump the hopper. The hopper dumped and then bounced back, striking the employee's left index finger, resulting in a partial amputation.",0
"An employee was hydrovacing a pole hole when the hydrovac wand sprayed their left foot, resulting in a puncture.",1
"An employee was unloading a trailer when their foot became stuck in a conveyor belt, resulting in a tibia fracture and ankle dislocation that required hospitalization.",1
An employee sustained fractures to his right middle and index fingertips while operating a shear press.,1
An employee was cleaning a vibratory product conveyor when the pneumatic slide gate amputated their fingertip.,0
"On March 11, 2023, an employee was exiting a forklift when his right pant leg became caught on the brake pedal. He lost his balance and fell to the ground, resulting in a fractured pelvis/hip.",1
"An employee was using a U-boat cart to move product from the access storage on the sidewalk. A box fell off the U-boat cart and the employee stopped the cart to pick up the box from the floor. Due to the uneven surface of the paved sidewalk, the U-boat cart began to shift and tipped over. As the employee quickly moved out of the way, she fell, striking her left hip on the ground.",1
"An employee was on a routine security patrol, walking around the building, when he slipped on ice and fell. The employee sustained a fractured hip and an hand injury.",1
An injured employee was found outside next to the building approximately 15 feet from the cab of his truck. The employee sustained neck injuries from a possible fall due to snow and ice and went into cardiac arrest.,1
"On March 12, 2023, at 8:13 AM, an employee was walking into work from her car when she slipped on the sidewalk and fell, sustaining a fractured left ankle.",1
An employee was performing plumbing work while on a ladder when they lost balance and fell to the floor. The employee fractured ribs.,1
"An employee was cleaning at the end of the shift when they stepped on the fryer filter, lost their balance, and fell into the fryer. The employee sustained burns to the foot/ankle.",1
"An employee was loading concrete traffic barriers onto a semi trailer when he tripped, causing his foot to become caught between the pins that hold the barriers together and the step deck of the trailer. The employee sustained a compound fracture to the lower right leg and fractures to the foot/ankle. The employee was hospitalized and had surgery.",1
"While making sandwiches, an employee sustained a laceration on her left hand from a knife. The employee was hospitalized.",1
An employee was operating a reach truck when it ran over his left foot; he sustained a left foot fracture.,1
An employee was standing on a roof panel spraying water on the roof to wash pollen off. The employee fell through the roof and landed on a barbeque pit approximately 12 feet below. The employee sustained two fractures in their back.,1
An employee was pulling a cover off a piece of electrical equipment when a flash occurred and they were electrocuted and sustained burns to their face and both hands.,1
"On March 13, 2023, an employee was loading plastic bails onto a flatbed tractor trailer. The employee slipped and fell from the trailer to the ground. The employee was hospitalized with fractures to the ribs and clavicle and a punctured lung.",1
An employee was walking around a pallet in the warehouse when they tripped and fell to the ground. The employee was hospitalized with a broken femur.,1
"On March 13, 2023, at approximately 4:45 PM, an employee was operating a vertical pile installation machine to install a lower guide. When he returned upright, he contacted the machine's head plate and sustained a C6/C7 cervical fracture and lost consciousness temporarily.",1
"An employee was using an overhead crane to position a valve for installation over his head. The sling holding the valve broke, causing the valve to fall and strike the employee. The employee suffered broken ribs, lacerations to the head and ear, and a collapsed lung.",1
"An employee was walking down an escalator, fell, and traveled down the escalator about 10 feet before landing on the floor. The employee sustained a fractured clavicle.",1
The injured employee was unloading freight at a dock door. The employee exited their powered industrial vehicle (PIV) to read a label on freight when another employee pulled the door. The dock plate fell causing the injured employee to fall approximately 4 feet from the dock to the concrete ground and sustain a compression fracture in his back and fractures to the ribs and tailbone.,1
"An employee was feeding material through the rollers of a machine when his hand became stuck in the machine. The employee removed his hand and continued to work. The employee then noticed his hand was bleeding and became lightheaded; the employee passed out and fell, striking his head on the floor. He sustained a skull fracture.",1
"At 6:15 a.m. on March 13, 2023, an employee slipped and fell in a parking lot, suffering a broken pelvic bone. She was hospitalized.",1
"An employee was climbing a ladder to close a steam valve. As the employee was moving from the second to the third step, the employee fell onto a tool trailer and sustained right hip fractures.",1
"An employee was testing the rotation of an HVAC valve when it closed on her right thumb, resulting in an amputation.",1
"On March 13, 2023, an employee was shifting a floor joist from an A-frame ladder when he lost his balance and fell. The joist landed on him, resulting in rib fractures and a back injury that required hospitalization.",1
"The injured employee was assisting in the movement of a modular office unit that was being lifted by another employee using a side loader. The injured employee went to grab a board underneath the pallet and the pallet, load included, fell off the forks of the side loader and pinned the injured employee between his sit-down forklift and the side loader. The injured employee sustained non-displaced fractures to the right tibia and fibula.",1
"An employee was working on a piece of equipment that cuts rolled finished goods. As the rolled product conveyed down the line, the employee placed the customer's shipping document into the inner core tube. As the employee was withdrawing his right hand, it was pinched between the roll's core and the frame of the equipment, resulting amputation of the ring fingertip.",0
An employee was walking away from the check lane to go to the office when they tripped over a handbasket that was on floor and fell. The employee was hospitalized with a fractured left hip.,1
An employee was assisting a rig crew with stabbing drill pipe into a rotating head. The employee's fingertips became caught between the rotating rubber head and a trip nipple causing lacerations to four fingertips on the left hand and partial amputations to his right ring and little fingers.,0
"An employee had been removing baffle plates from a tower in a facility. While moving to an upper level on a scaffold, he lost his footing and fell approximately 8-9 feet to a lower level and impacted a handrail on scaffolding below. The employee sustained five fractured ribs on the right side and internal bleeding.",1
"On March 13, 2023, an employee was attempting to align the couplers while switching rail cars when their right thumb was pinched between the couplers. The employee sustained a partial amputation/soft tissue damage to the right thumb.",0
An employee was working near a roof edge when they fell approximately 12.5 feet and sustained a hip fracture. Fall protection was not tied off at the time.,1
"An employee was performing cleanup activities. As they reached to remove wood from the table saw, the wood broke, causing the employee's hand to strike the table saw. The employee sustained a fracture to the right index finger.",1
"An employee was unpinning a beam and removing it from the pinned position. As he pulled it from the pad eyes, the beam fell approximately 18 inches to the ground. The employee's right middle finger was caught between the beam and the ground, resulting in a fracture to the distal portion of his finger that required surgery.",1
An employee was going down a 15-to 18-foot ladder to go on break when he slipped and fell an unknown distance to the ground. The employee was hospitalized with a fractured left knee and required surgery.,1
"On March 13, 2023, an employee was making a right turn on a stand-up forklift when the forklift struck a rack. The employee sustained an injury on or near their right rib cage and experienced difficulty breathing.",1
"An employee was pouring molten aluminum into a sand cast mold when some aluminum fell from the ladle into his shoe, resulting in second- and third-degree burns.",1
"On March 13, 2023, an employee was cutting thick plastic on a horizontal band saw when their left index fingertip was amputated by the saw blade.",0
"An employee was pushing totes. The employee tripped on a tote, fell to the floor, and suffered a back injury.",1
An employee was removing a heel of bread from a bread slicer when his left middle fingertip was amputated.,0
"An employee was carrying air filters to the roof when they fell approximately 16 feet from the top of a fixed ladder. The employee's head contacted an electrical box during the fall, resulting in head trauma.",1
"On March 14, 2022, a mechanic was repairing the tailgate of a dump truck. As the employee was testing the repairs, the tailgate closed on one of their fingers. The fingertip was amputated from the nailbed up.",0
An employee was changing an embossing unit on a die cutting machine when the die dropped to the floor. The employee's hands were pinched between the die and the support arms of the unwind unit of the die cutter. The employee sustained a fractured finger and lacerations to their hands and fingers.,1
An employee fell from a ladder and sustained a lower back fracture that required hospitalization.,1
"An employee tripped over a piece of banding sticking out from a vanity. The employee fell, sustaining a hip injury that required surgery.",1
"An employee was training with a supervisor on how to operate a manlift. He fell 6 to 12 feet, landed on his head, and was hospitalized.",1
"An employee was cleaning basement materials out from underneath a pot. As the employee was walking backward, his foot became caught under a metal pad, causing him to fall and sustain a right tibia and fibula fracture.",1
"An employee was walking behind the cash register when they tripped on a cord and fell, resulting in a contusion to the right knee.",1
An employee's right index finger was caught in a meat tenderizer. The employee was hospitalized and the finger was medically amputated.,1
"An aerosol can of non-stick spray landed on a hot grill. As one employee attempted to remove the can, it fell to the floor and then exploded, striking and lacerating the injured employee's cheek.",1
An employee was inspecting chicks when they fell backward and struck their head on the concrete. The employee sustained a traumatic brain injury.,1
An employee was using a powered industrial truck to remove pallets from his trailer when his left ankle was caught between the vehicle and the wall. The employee sustained a crush injury to the ankle.,1
An employee was operating a press in the main production area when they were caught between parts of the press. The employee sustained a left forearm fracture.,1
A forklift backed into an employee as he was walking through a yard. He suffered injuries to both legs and his left arm.,1
"An employee was putting tools away and performing housekeeping tasks next to a grapple truck. The employee's foot was under the outrigger as it was lowering, resulting in a crush injury.",1
An employee was working at the front counter register when an individual came in and attempted to rob the restaurant. They shot the employee in the leg and the employee was hospitalized.,1
An employee was nailing 2-by-10s into place in a tray ceiling. The employee fell to a lower level and was hospitalized with multiple injuries to the spine and upper extremities.,1
An employee was loading a trailer when they fell from the trailer to the ground and sustained a fractured foot. The employee was hospitalized and required surgery.,1
An employee was operating a stand-up forklift in the warehouse when it struck another forklift. His left foot was caught between the two forklifts. The employee was hospitalized with a foot fracture and lacerations that required surgery.,1
An employee was helping to load a sewer pipe onto the back of a truck when the pipe rolled off the truck and struck the employee. They sustained a contusion to the back of the head and a leg fracture.,1
"An employee was unbolting a metal plate to access a bucket elevator. When he was unbolting the last bolt, the metal plate cover was about to fall. As he went to catch the metal plate cover, his hand contacted the bucket elevator, resulting in a hand injury.",1
"An employee was closing a freight elevator door. The door caught his finger, causing an amputation.",1
An employee was struck by a pallet mounted on a forklift and knocked to the ground. The employee was hospitalized with a back injury.,1
An employee was using a circular saw to cut a wooden pallet when the blade guard became stuck. The employee was holding the guard when they came in contact with the blade and sustained a fingertip amputation.,1
"An employee was performing plumbing work on a roof. While drilling a hole in the roof, the drill's chuck caught the employee's glove and his little finger was twisted around the shaft and amputated at the knuckle.",1
"An employee was moving a grate with a hoist when the grate fell from the hook. The employee's right hand was on a roller track when the grate landed on his finger, resulting in an amputation.",1
An employee was removing the valves from low-pressure cylinders when their left thumb was caught between the clamp of the cylinder valving machine and the inside guard of an empty cylinder. The employee sustained a fingertip amputation without bone loss.,0
"An employee had been working on the rig floor. While pulling rods, the rod elevators jumped off the rod hook and came free from the rod. The rod elevators then fell and struck an employee on the head resulting in a head laceration and a neck fracture.",1
"An employee was on a 10-foot step ladder clearing a plastic jam in an overhead conveyor system. The employee lost balance and fell approximately 8-9 feet to the floor, resulting in a compound fracture of the left leg.",1
An employee fell while throwing trash into a garbage can. He broke his left hip and left wrist and was hospitalized.,1
"An employee opened the first floor safety door to the freight elevator and stepped in. The elevator was not there, and he fell from the first floor to the basement level of the elevator shaft. The employee sustained fractures.",1
"An employee was on a ladder delivering fuel into a customer's tank when the tank slid, knocking the employee off the ladder. The tank landed on the employee's left leg, causing contusions and a fractured lower leg.",1
An employee was operating a ribbon blender. The employee had turned the machine off and was reaching into a discharge port when the blender's agitator partially amputated one of the employee's fingers.,0
"An employee was operating a double pallet jack. While maneuvering around a turn in the main drive aisle, the pallet jack struck a rack. The employee's left foot was caught between the pallet jack and the rack resulting in a fractured tibia and fibula.",1
"An employee was torch welding overhead steel and pulled it to break the cut when the material shifted, causing multiple steel objects to fall on him. He sustained two vertebrae fractures and a scapula fracture.",1
"While trying to stop a shopping cart, an employee stepped off a curb and suffered a broken ankle.",1
"An employee was operating a gantry crane to move a coil to their bay. When he set the coil down, the crane became stuck inside of the coil. As he pushed the down button, the hook swung back, crushing his left hand between the hook and coil. The employee sustained two finger fractures that involved muscle and tendon injuries. The incident occurred during training.",1
An employee was placing his toolbox in the back of a truck when the truck moved forward. The employee was struck by the trailer and sustained multiple broken bones to his lower extremities that required hospitalization.,1
An employee was operating a floor scrubber when he became pinned between the scrubber and a conveyor. He sustained rib fractures and a neck injury.,1
"At 4:30 p.m. on March 15, 2023, an employee was installing a steel leg in a sleeve for a floating roof above an aboveground storage tank. Her left thumb was caught in a pinch point between the leg and a sleeve. The thumb was crushed and amputated.",0
"An employee was tightening a loose bolt that had allowed the steel back in a vertical hydraulic cylinder to loosen. The steel back closed on the employee's left hand, amputating it. He was hospitalized.",1
"An employee was operating a mini skid steer, trying to get wood waste from under a trimmer unscrambler. The skid steer cantilevered forward and the employee's left hand was crushed between its control handle and a crossbeam under the trimmer.",1
"On March 15, 2023, an employee was operating a piece of equipment when their coat got caught on the controls. The bucket of the equipment struck the employee causing them to fall into a trench and sustain a bulging disc in their back.",1
"An employee was directing traffic for concrete trucks going in and out of a job site. He put the stop sign up and indicated/waved to an oncoming SUV to stop. He then turned to a concrete truck to signal him to exit the job site, when the SUV struck the employee. The employee sustained contusions to their head and chest and scratches to their arms and legs as well as a concussion.",1
"An employee fell while stepping backward from her car. She landed on the ground, suffered an ankle injury, and was hospitalized.",1
An employee was climbing a fixed ladder when they slipped and fell 4 feet. The employee was hospitalized with a left wrist fracture.,1
"An employee was operating a forging press machine. He went to load a part into the machine that already had a part in it. When the die came down, the parts shattered and shrapnel lacerated the employee's neck. The injury required surgery.",1
An employee was walking into the building to report for work when they slipped and fell on a stairway landing. The employee sustained a fractured right tibia that required hospitalization and surgery.,1
An employee was removing meat buildup from a meat processing machine when his right middle finger was partially amputated.,1
"An employee placed an explosive in the economizer hole and another employee then set the blast. When the explosive blast occurred, the injured employee sustained amputations to fingers on the right hand.",1
"An employee was standing by the bay door when a co-worker stepped on a plate, causing the injured employee to lose balance and fall to the floor. The employee sustained a leg fracture and was hospitalized.",1
An employee was walking next to a co-worker near a service line when they collided. The injured employee fell to the floor and sustained a hip fracture.,1
"An employee was waterproofing the roof of a newly constructed building. While walking, he stepped onto a piece of plywood that was a part of an unsecured hatch. He fell about 6-8 feet and landed on a catwalk, suffering a broken left ankle and heel as well as a puncture wound.",1
"An employee was operating a pallet jack in a freezer. When he stepped off the pallet jack, it ran over and broke his ankle.",1
"An employee was laying down steel coils when their left hand was caught between two of the coils, resulting in crush injuries, an amputation of the middle finger, and a partial amputation of the ring finger.",0
"An employee fell 5 feet from a scaffold to the floor and sustained injuries to the head, elbow, and hip.",1
"An employee was unloading 6-inch ductile iron pipe from the back of a flat-bed truck. The load shifted, causing the employee to fall off the back of the truck. The pipe then fell on top of the employee. He was hospitalized with broken ribs, a broken pelvis, and a collapsed lung.",1
"An employee was driving an all-terrain vehicle (ATV) when it overturned. The employee fell to the ground, resulting in a broken leg and possible broken arm.",1
"An employee was climbing down from his semi-truck after clearing the roof of snow. During his decent, he fell to the ground, resulting in two vertebrae fractures.",1
An employee was troubleshooting a robot palletizer. He was trying to move the equipment when the robot finger froze and clamped his right hand. He suffered an amputation to the little finger and a laceration to the ring finger.,0
"An employee was lifting a round, glass table top while working on a waste collection route. The glass table top shattered and lacerated the employee's arm.",1
"An employee was pushing a cart in the parts-handling area before going to help a forklift driver move a metal shelf. As the forklift was navigating through the area, the injured employee took the outer wall of the shelf off and laid it out of the way. When the wall was removed, the shelving unit became unstable and began to fall. The employee went to catch it as it was falling to the ground and sustained a laceration to his left elbow. The employee was hospitalized.",1
"On March 16, 2023, an employee tripped over the wheel of a rack, hit her head on a metal door frame, and fell to the floor. She suffered a head laceration and an injury to the left hip.",1
"An employee was bringing a dog inside when the dog got loose and attacked the employee, resulting in bite wounds and lacerations to the face.",1
"An employee was performing annual preventative maintenance within a switchgear unit. The employee contacted an energized part on the unit, resulting in burns to his hand and arm.",1
"An employee was delivering eggs to a hatchery. As he was on the tractor trailer raising the roll-up door, he slipped and fell to the ground, resulting in two wrist fractures and a fracture underneath the eye.",1
"An employee was entering the facility from outside, pushing a food cart down a ramp when they tripped and fell on the ramp. The employee sustained a lower back injury.",1
"An employee was preparing to put trash in a compactor. A nearby pallet started leaning; 40-pound boxes of chocolate ingredients fell off it and struck the employee, knocking him against a wall. He suffered a broken left collarbone and a broken lower-back vertebra. He was hospitalized.",1
"An employee was following a suspected shoplifter into a parking lot. The suspect tackled the employee to the ground, and the employee suffered a compound fracture and dislocation to the ankle.",1
"On March 16, 2023, an employee was utilizing a forklift outside of the facility to clean up trash when the vehicle became stuck. The employee then went into the building to use another forklift to pull the stuck forklift out with a chain/hook. While pulling out the stuck forklift, the chain and hook broke, striking the employee in the head/face. The employee sustained injuries to the head that included a fractured skull, brain bleed, the loss of seven teeth, and lacerations. The employee was hospitalized.",1
"An employee was cleaning sawdust from a machine when a wood chip lodged in the vacuum dust collection system and caused it to stop. When the wood chip broke loose, the dust collection system restarted, causing a piece of wood to contact the employee's left hand. The employee was hospitalized with a fractured left thumb and a laceration.",1
"An employee was using a rag to clean the surface of a chill roller machine used to extrude sheets that are fed into the rollers. The employee's right hand was pulled into the rollers, resulting in amputations of the little and ring fingers.",1
"An employee was cleaning the maintenance shop and dumping debris in a dumpster using a forklift. As the employee was dumping the debris, their left hand was caught between the 5-yard metal hopper and the forklift forks, resulting in a left index fingertip amputation.",0
"An employee was repairing a small leak in a chilled water line using a threading machine to remove a fitting from a piece of pipe. As the employee adjusted the wrench, the machine activated. The employee's right index fingertip was caught between the wrench and a support bar and amputated.",0
"An employee was hauling trash when her thumb was caught in a pinch point in the tipper, resulting in a partial amputation.",0
"An employee's right hand was caught in a food mixer, resulting in amputation of the hand.",1
"An employee was welding on a vertical steel plate. The plate fell onto him, causing injuries to his back and ribs.",1
"On March 16, 2023, an employee was working at a well site. The employee, wearing a fall harness, was being lifted off the rig floor with a winch line to close a valve. The winch line caught between a tubing board hinge and a derrick and pulled up, causing the employee to strike the tubing elevators and suffer a broken pelvis. The employee was hospitalized.",1
"An employee was assisting with a 6-man lift of a 450-pound exterior wooden frame wall. The bottom of the frame/wall slipped during the raising operation, causing the wall to fall and strike the employee in the back of his hard hat. This knocked him to the ground and the wall then landed on his back. The employee sustained a back injury, and a possible fractured spine.",1
"An employee was on a scissor lift, using a reciprocal saw to cut an inactive line with a 6-inch blade. The blade cut into an adjacent anhydrous ammonia line, releasing vapors that burned the employee's mouth and tongue and caused respiratory issues.",1
An employee was helping to stabilize drilling equipment when their fingers were crushed between the auger and auger guide on the drilling rig. The employee sustained crush injuries to the left middle and ring fingers that resulted in partial amputations and hospitalization.,1
"On March 16, 2023, an employee was removing plastic and straps from palletized material. As she pulled the strap out from under the pallet, it broke, causing the employee to fall backward and sustain a fractured pelvis. The employee was hospitalized.",1
"An employee was on a lift gate, unloading a transmission into the back of a delivery vehicle. The employee stepped backward, slipped on transmission fluid, and fell backward from the lift gate to the concrete ground. The employee suffered a back injury.",1
"An employee fell on a ramp, sustaining a broken leg.",1
"An employee slipped on wet grass while walking down a hill. The employee fell, landing on their right knee, and was hospitalized.",1
"An employee was core drilling 1-inch holes into a concrete wall at a 45-degree angle downward. The employee was hand-turning the drill bit while it was attached to the drill and on a post mounted to the wall while using a file to sharpen the segments at the end of the bit. The set screw came loose, sending the drill and the bit free. Both the drill and the bit fell down the post and ripped the tip of the employee's left ring finger, resulting in a surgical amputation to the first knuckle.",0
An employee was cleaning a conveyor when their right arm became caught in the conveyor drive and guide roller. The employee was hospitalized with a broken arm.,1
"An employee had been loading meat trays on a conveyor belt. After finishing, the employee's finger became caught between the conveyor and a table leg, resulting in a partial amputation.",0
"An electrician was troubleshooting an outdoor electrical panel. When he opened it, an arc flash caused burns to his right arm and hand.",1
"On March 17, 2023, an employee was operating a forklift in a production area. As he backed up the forklift, it struck an oil tank. His right hand was caught between the tank and a vertical rail on the forklift, and his right ring and middle fingers were amputated at the first knuckle.",0
An employee was using a chop saw when it amputated the employee's left middle finger.,1
An employee was feeding kale into a food processor when their hand slipped and the blade of the food processor amputated their right middle fingertip.,1
An employee was aligning two components of an assembly machine when their left index fingertip was amputated.,0
An employee went to push empty totes with their legs when they lost balance and fell to the floor. The employee sustained a fractured hip.,1
"An employee was driving a forklift down a ramp after dropping off freight at a dock. The ramp was sweating, causing the employee to slide off the dock. The employee suffered a broken left hand.",1
"An employee fell from a ladder to the ground, suffering seven broken ribs and a broken collarbone.",1
An employee was sweeping around a machine and went to clear a buildup of candies below the bucket conveyor. The machine caught their left ring finger resulting in amputation.,0
An employee was operating a manual shear machine to process stock when he sustained a right middle finger crush/degloving injury and a ring finger amputation.,0
An employee was cutting fabricated wood with a cordless circular saw. The saw lacerated the employee's left index and middle fingers.,1
"An employee was working on a helicopter when they fell from the top of the aircraft to the ground, resulting in a head injury.",1
An employee had been conducting preventative maintenance on an edge bander machine and was running a test piece. The blade that cuts the banding material cycled and his left index finger was amputated to the first knuckle.,0
"An employee slipped on ice in a parking lot and fell onto her back, suffering a broken lower-back vertebra.",1
"On March 17, 2023, an employee was getting out of his personal vehicle when he rolled his ankle and fell to the ground, resulting in a knee injury.",1
"On March 17, 2023, an employee was performing maintenance on an auger machine and replacing a chain. The employee was checking the tension when the chain amputated their left ring fingertip.",0
"An employee was walking when they tripped on the wheel of a stretcher. The employee extended their hand to brace themself and fell to the floor, sustaining a broken right wrist.",1
An employee was using a band saw to cut blocks of corrugated cardboard and partially amputated their left middle finger.,0
"An employee was climbing up a hatch ladder to a roof. He slipped on a rung and fell to the ground, landing on his measuring tape and sustaining a hip injury.",1
"An employee was standing on an 8-foot ladder, about to make a cut using a handheld circular saw. The saw lacerated the top of his left wrist and he fell to the ground. He was hospitalized.",1
"An employee fell through a skylight on a roof, landing 8 to 10 feet below and suffering a broken leg.",1
"On March 17, 2023, an employee was driving a truck that was hauling a bomb cart containing a 20-foot tank to be loaded onto a cargo ship. The employee positioned the bomb cart under a gantry crane which then hooked onto the tank and lifted it up about 3 feet. The tank's corner section snagged the bomb cart, which lifted the truck with the employee inside its cab. As the crane was lowering the tank, the corner of the tank dislodged from the bomb cart. The cart and the truck dropped back to the ground and the employee's head hit a metal part of the cab . The employee sustained a laceration to the back of the head and a fracture to the pelvis that required hospitalization.",1
An employee was closing the tailgate of a garbage truck when their hand slipped. The tailgate fell and crushed the employee's right hand against the floor of the truck. The employee was hospitalized with multiple fractures and lacerations to their right hand.,1
An employee was fixing a jam in a machine when they were struck by a blade and sustained a left index fingertip amputation.,0
"An employee was working with an electric transformer, 4 to 5 feet high, when it tipped over onto him. He suffered an ear injury and a pelvic injury.",1
"On March 17, 2023, a truck driver was attacked while delivering gasoline to a gas station. The employee suffered a head injury and lost consciousness.",1
An employee sustained crush injuries to their left index and middle fingers from a hydraulic press; the injury required hospitalization.,1
An employee was doing a plunge cut on formwork using a circular saw when the blade amputated their fingertip.,0
An employee was installing clips between studs. The employee's finger was caught and injured.,1
"An employee was wing walking an aircraft onto a taxiway. As the employee began to disconnect the towbar that connected the aircraft to a tractor, the employee's finger was pinched between the pin and the ring connecting the towbar to the tractor, resulting in amputation.",0
"An employee was using a deburring grinder to debur a piece of angle iron in preparation for welding. The employee's right hand contacted the wheel, which broke and lacerated the employee's index finger and also broke their ring finger.",1
"A maintenance employee changed the belt on the drive chain on a slicer machine and was kneeling to visually observe the rotation of the belt. As the employee stood up, their left hand made contact with the in-running nip point created by the belt and pulley. The employee's left middle finger was amputated to the cuticle of the fingernail.",0
"An employee was working in the office when he was asked by a co-worker to assist with defusing a situation with a client. Another client then approached the employee and bumped/pushed him, causing the employee to fall to the floor and land on his hip. The employee sustained a hip fracture that required surgery.",1
"Two employees were lowering a crate of landscape edging that was stacked upright in a trailer onto a pallet. The crate slipped and bounced off the pallet, striking one employee's right ankle and knocking him to the ground. He suffered a crushing injury to the foot and ankle with a strain, as well as a lower back strain.",1
An employee was inspecting a jam on the high line near the blast furnace when the shuttle that operates on another line moved and struck the employee's left foot. The employee was hospitalized with fractures to their foot.,1
"An employee was unloading recyclables and empty pallets when his right ring finger was caught between the pallet jack's grab bar and a wooden pallet, resulting in amputation of flesh underneath the nail to the first knuckle.",0
An employee was removing a belt from a machine. The belt slipped and the employee's right little finger was caught between it and the pulley. The employee suffered an amputation to the finger.,0
"An employee was standing at the bedside of a patient. While moving to the other side of the bed, the employee tripped over a phone cord and fell to the floor sustaining a fractured hip.",1
"An employee was walking to fix a pallet when they fell 3 feet to the lower surface, resulting in a knee fracture and ankle sprain that required hospitalization.",1
An employee was using a utility knife to cut a spool roll to get excess paper off the spool. The employee then tripped with the knife in their hand and fell. The utility knife cut through the employee's glove and partially amputated their left middle finger halfway through the nailbed.,0
"An employee was feeding rubber into the feed tray. While aligning the rubber, the employee's hand became caught by the screw resulting in amputation below the elbow.",0
"An employee was descending a fixed ladder from the top of a kiln. He slipped from the third or fourth rung, fell to the ground, and suffered multiple fractures to his lower left leg in the ankle area.",1
"An employee was lifting water stacked in a self-checkout area. The employee proceeded to walk between a checkout stand and the bagging area when she fell and landed on her side, resulting in a right hip fracture.",1
"An employee was attempting to take plexiglass off a forklift to put it in a dumpster when the plexiglass bent and pushed back on the employee, causing them to lose their balance and fall backward to the ground. The employee suffered a shin fracture that required hospitalization.",1
"An employee fell while stepping down from a flatbed truck. The employee landed on the concrete pavement, suffered a broken hip, and was hospitalized.",1
An employee was walking past a conveyor as he was walking to his work station in the marination department. The employee tripped over a power cord that was on the floor and sustained a hip fracture.,1
"An employee was standing on a ladder drilling a hole in the wall to install the control circuit for a new HVAC system. The employee lost his balance and fell to the ground, resulting in a fracture that required hospitalization.",1
An employee had placed a hydraulic jack under a vehicle to change a tire. The locking pin for the jack popped out and lacerated the employee's eyebrow. The employee received stitches.,1
A temporary employee was cleaning gyro-making equipment in the production room when a tube became stuck. The employee attempted to move it and sustained an amputation to the left thumb tip.,0
An employee was walking when they slipped and sustained an injury to the foot/heel/lower leg.,1
"An employee was adjusting a coiler clamp machine. The clamp closed on the employee's right-hand fingers, causing open fractures to the middle and ring fingers that resulted in partial amputation.",0
An employee was walking to the edge of a low-slope metal roof when they fell to the ground and sustained broken bones.,1
"An employee was preparing to sanitize the piping system on the milk and cream production system. Upon removing a clamp, hot water shot from the pipe, causing the employee to sustain second-degree burns from his shoulder to his wrist.",1
An employee was servicing a manure pump. The pump was removed from the manure pit and disconnected from power. The employee used a crowbar to clear debris from the internal casing. He was spinning the motor blade to verify that it was spinning freely when it fractured and lacerated his left middle finger.,1
"An employee was carrying out a shrink-wrapping task. The employee's right little finger was pinched between a skid runner and a driven conveyor roll, causing an amputation to the finger.",0
"An employee was walking into work when they collided with a pole, resulting in a nose and right leg injury.",1
An employee was leaning down at the truck bumper when they were struck by a forklift that was backing up to load a bundle of trusses. The employee sustained a femur fracture and crushed pelvis.,1
"On March 20, 2023, an employee was inspecting a vehicle's fire extinguishers when she slipped off the stairs of the vehicle and sustained fractures to the back of the skull. The employee was hospitalized.",1
"An employee was inspecting a pump inside a pipe to ensure it was working properly. Pressure was released from the pipe plug, causing the plug to be pushed forward by accumulated water. The employee's left arm became pinned between the rungs on the ladder and the pipe plug, resulting in a wrist and nose fracture as well as two tooth avulsions.",1
"An employee was trying to move a spring-loaded dock plate. The plate crushed the employee's left middle fingertip, causing its amputation.",0
An employee sustained a puncture wound when a nail gun fired a nail into his leg.,1
An employee was reaching for a piece of paper when he fell and struck his head on a table. The employee then fell to the ground and sustained a head contusion.,1
"An employee fell from a one-tier scaffold, suffering an injury to the right knee that required surgery.",1
"Two employees were operating baggage vehicles at the airport. One employee was driving a baggage tractor and the other was driving an electric tug. The two vehicles collided head-on, causing the employee on the tug to sustain a concussion as well as a forearm fracture and laceration. The employee was hospitalized.",1
"An employee was working on a wood lamination machine to form arches. As the employee was using a hammer, it struck his thumb, resulting in a fingertip amputation.",0
"An employee was on a ladder changing a flange gasket on 16-inch water pipes. The pipes came together and caught the employee's left index fingertip, resulting in an amputation.",1
"An employee was working in a trench to install a water pipe. Part of the pipe rolled down the embankment and struck the employee, who suffered contusions to the left shoulder and right ankle.",1
"On March 20, 2023, an employee was walking beside a foreman carrying a ladder when the ladder struck a pipe, causing the pipe to break and spray the employee with 180-degree water. The employee sustained burns to the right hand, elbow, and stomach.",1
A shoplifter picked an employee up by the neck and slammed her to the ground. She suffered contusions on the left side of her head and neck.,1
"An employee was on a ladder working on a duct fan motor in a parking garage. After testing the fan and motor, the employee climbed up the ladder to retrieve his tools. He contacted the fan belt of the drive motor while trying to steady himself on the ladder. The fan belt rotated and trapped his finger between the drive motor pulley and the belt, resulting in a middle finger amputation.",0
An employee was sitting at the controls of a forklift when another forklift backed into his forklift. He suffered a neck and head injury.,1
An employee was moving a parked walkie rider pallet truck. The employee's left foot was caught and crushed between the pallet truck and a wall.,1
"On March 21, 2023, at approximately 1:12 PM, a paint prep employee was adjusting a cylinder on a rack when his right little finger became caught between the cylinder and rack. The employee sustained a fingertip amputation.",0
"An employee was inspecting biscuits when their shirt sleeve became caught on the edge of the conveyor, pulling their arm into the conveyor. The employee sustained multiple fractures to their hand.",1
An employee was cutting an existing masonry wall for a new window opening. The grinder he was using lacerated his right hand and he was hospitalized.,1
"An employee was on a ladder, tightening bolts to stop a system coupling from leaking. A bolt broke, and the water flow knocked him off the ladder. He suffered a broken right wrist and right hip.",1
"An employee was returning from a break outside when she fell, striking the outside of the building. The employee sustained a head injury, a concussion, facial contusions, and a right arm fracture.",1
"An employee was walking to the back of the store when her foot got tangled with plastic wrap that was attached to a pallet. She tripped and fell to the concrete floor, sustaining fractures to her right knee and left elbow.",1
"An employee was test firing a 50-caliber rifle when the bullet ricocheted off a steel plate that was part of the frame for the rubber-coated bullet trap. The bullet struck the employee in the center of his neck, creating a 1/4 inch entry wound. Bullet fragments damaged the employee's trachea and the employee ingested the remaining fragments.",1
"An employee was working on a rooftop when she fell off the roof to the ground below, resulting in fractures to her arm, elbow, and pelvis.",1
"An employee was in the middle of welding a steel slide. As he bent over to put an overhead onto the crossmember of the slide, a spark flew onto his jacket. He suffered second-degree burns to the right side of his chest, from the rib cage up to the armpit.",1
"An employee disassembled a lift magnet. When they pushed down on the socket wrench handle, the gap in the magnet frame closed on their left ring finger causing a partial amputation.",0
An employee was directing a forklift that was unloading a box truck when the forklift struck the employee on the right leg.,1
"While operating a table saw, an employee suffered lacerations to three fingers and two broken bones on the left hand.",1
"An employee was in the back of his trailer making a delivery. His truck began to roll forward, so he jumped out of the trailer to try to stop the truck. He suffered a knee injury.",1
An employee was performing plumbing work and cutting zip ties with a knife when he sustained a puncture/stab wound to the forearm.,1
"An employee was flattening tilt hoods in a flattener. His left ring finger was in a hole in the part to position the part to feed into the tilt hood machine. While pushing the part through, his left ring finger was amputated at the first joint.",1
An employee was disassembling shelving to change out a racking system for a compressor system when the metal brace fell and amputated half an inch of his left little finger.,1
"An employee sustained burns to the hands and face when vapors in a compounding room ignited from a spark, causing a fire.",1
An employee had an asthma attack while working in the paint department.,1
An employee was cutting wood spacers for a countertop using a miter saw when the blade grabbed his glove and pulled his left index finger into the blade. The employee's fingertip was amputated.,0
"On March 21, 2023, an employee was using a front-end loader to load soil into a mixing hopper. The employee's hand came in contact with the mixer, resulting in amputation of the hand.",1
"An employee was installing a roof when a nail gun fired a nail into his knee, behind the kneecap. He was hospitalized.",1
"An employee was cutting off the end of a pipe with an automated saw that was on a roll conveyor. The employee went to move the cut end of the pipe. While his hand was on the cut end, a second pipe began moving toward him on the same conveyor. The second pipe made contact with the cut end and pinched his hand between the cut pipe and a roller, resulting in a fractured finger that required surgery.",1
An employee was shocked in their upper torso and sustained burns to their chest and arms.,1
"An employee suffered an amputation to the right ring fingertip, caused when a die was set down in a tool shop.",0
"An employee was installing the flared end section of a concrete elliptical pipe. As the pipe was being installed, it swung in the direction of a previously installed pipe. The employee's left ring fingertip was pinched between the two sections of pipe and amputated.",0
"An employee was stationed at a surge hopper material silo air cylinder valve in an injection mold department. She noticed that material was not feeding and that the valve was loose. While working on the machine, the valve activated and pinched her right middle finger, causing the amputation of the fingertip.",0
"An employee was walking near the elevator building when she slipped on ice and fell, hitting the back of her head on the pavement. The employee sustained a skull fracture, cerebral bleed, and temporarily lost consciousness.",1
"An employee had just loaded a pickup truck onto the deck of a rollback truck. He was standing on the deck, reaching to close the driver door of the pickup, when the pickup's rear door swung open and caused him to lose his balance. He fell 3 feet to the ground below, sustaining fractures to the right tibia and fibula, as well as a fractured left wrist.",1
"An employee was driving a golf cart to the back of the parking lot. While turning right, the seat of the golf cart detached. The employee and the seat slid across the gravel surface and he struck the dumpster with the left portion of his chest. The employee was taken to the hospital with fractured ribs.",1
"An employee picked up a load of liquid carbon dioxide and disconnected the hoses from the trailer. While taking a sample of product, the valve opened and a release of pressure knocked him to the ground. The employee was hospitalized with a head injury.",1
An employee slipped on a wet floor while moving equipment. She fell and suffered a broken left hip. She was hospitalized.,1
An education supervisor went to talk with a student in the automotive shop. The student punched the employee and knocked him to the ground. The student then picked up a metal plate from the alignment machine and struck the employee at least twice in the face. The employee sustained broken bones in his face and a shoulder injury.,1
"An employee was pulling a water filter from a clam shell packager when the machine energized, causing the blade to come down and crush his right index finger.",1
"An employee was loading a roll into the chucks of the unwinder. As the employee went to move the pendant cord out of the way, the pendant closed on his left hand, resulting in a left middle finger amputation at the first knuckle.",1
"An employee was feeding a pressure washer through a pipe. As it made a turn at a flange, the employee's right hand was struck by pressurized water, resulting in an injury.",1
An employee was using a pallet jack when his right foot was crushed against a pole.,1
"An employee had just finished cleaning up spilled water at their workstation and was pushing the mop bucket back into the break room. The door closed on the employee's hand, resulting in an amputation of the distal portion of the right ring finger.",1
"An employee was operating a trackhoe to assist in the removal of a 6x24 trench box from a lowboy trailer. The employee felt the road start to give way so he set the trench box down. The trackhoe then tipped onto the passenger side, causing the employee to sustain a right femur fracture that required surgery.",1
An employee was offloading scrap metal when the semi-truck with a dump trailer tipped over onto the employee. The employee was hospitalized for head injuries and a laceration to their hip.,1
"An employee was trying to escort someone out of a restaurant. The guest attacked the employee with a metal pipe she had in her car, striking him on his head and right wrist. His wrist was broken.",1
"On March 22, 2023, an employee was stocking seasonal items from a stock cart when she fell backward and struck her head on the floor.",1
An employee slipped while sweeping a damp oily floor. He fell to the concrete and suffered a broken left hip.,1
"An employee was changing brake shoes on a trailer. The employee's left ring finger was caught between the S-cam and the roller of the shoe, resulting in a partial amputation to the finger.",0
"An employee was prepping pulp material to load into a pulp machine. The 420-pound pulp bale was elevated by a forklift and the employee was standing in front of the lift to cut the wire banding from the bale in order for the pulp to be loaded into the pulp machine. When the last banding was cut, the tension was released and the bales fell. A bale landed on the employee's right leg, resulting in a hip or femur fracture.",1
"An employee had climbed a 32-foot extension ladder to a second story rooftop of a residential home to install HVAC components. He walked to the peak of the roof where a temporary roof anchor was installed. While reaching to connect his lifeline to the roof anchor, his feet slipped on a moisture barrier that was wet due to melted ice. He slid down the roof and then fell approximately 19 feet, 10 inches to the ground. The employee sustained a scaphoid fracture to the left wrist.",1
"A broken-down dump truck was on a flatbed semi-trailer, with a bag placed over its exhaust. An employee slipped while reaching for the bag and fell from the flatbed to the ground, landing on their shoulders and then their head. The employee suffered a brain bleed.",1
"An employee was using a programmable automatic chop saw to cut lumber to size when the saw jammed. While working to clear the jam, the employee's right hand was caught by the machine guard resulting in amputations to their middle and ring fingers.",1
"On March 22, 2023, an employee was taking measurements to install a steel railing on a second-floor balcony. The employee fell to the ground about 20 feet below and suffered a broken leg.",1
"An employee lowered a stock picker to the ground in a warehouse. While driving the lift, there was an error with the dead man switch that caused the lift to stop. The employee was thrown from the lift, resulting in a contusion and strain on the thoracic spine.",1
"On March 22, 2023, an employee was making adjustments to a door operator when their finger was caught in a chain and sprocket and partially amputated.",0
"An employee was walking down a hallway when she tripped and fell forward, landing on her left elbow and striking her face against the wall. She suffered a displaced fracture to the left elbow, through the humerus, and was hospitalized.",1
"An employee was cutting wood dunnage on a table saw. The employee was holding a piece of wood to make it possible to cut all the way through it; the wood kicked back, causing the saw to lacerate his left thumb.",1
"An employee was cleaning and scraping meat off a machine when her gloved hand became caught in the conveyor, resulting in a left little finger amputation.",0
"At 10:30 a.m. on March 22, 2023, an employee was using a chop saw when its spinning blade caught the employee's glove and pulled it in. The blade lacerated the employee's left thumb.",1
"The injured employee was opening the door of the jet bridge to pass a passenger's checked item to another employee when they fell approximately 11 feet to the concrete below. The employee sustained fractured ribs, a fractured pelvis, and a laceration to the spleen.",1
"On March 22, 2023, an employee was using a broom to push down on a dock plate. The employee lost her balance and fell from the dock to the ground, sustaining fractures to the left leg, left knee, and right heel.",1
An employee had arrived at the work site; he was stepping out of the passenger side of a vacuum truck and miss-stepped. He fell backward to the ground and sustained injury to the back of the head.,1
"An employee was nippling up the stripping of a stripper head. The bottom section of the stripper head came unthreaded from the top section and fell 5 feet, crushing the employee's left thumb against the blowout preventer bolts. The thumb was broken.",1
"An employee was looking for a leak in a cluster of hydraulic hoses. A foot lever was tapped, causing hydraulic fluid to shoot out of the damaged hose and puncture the employee's right index finger.",1
"On March 22, 2023, an employee was walking to get coffee when she slipped and fell on the recently mopped floor. The employee was hospitalized with a fractured left hip.",1
"On March 22, 2023, at 11:52 AM, a truck driver was unloading a propylene truck trailer into a facility piping system. Propylene released and found an ignition source, resulting in a fire/explosion of the trailer. An employee sustained burns to his back, arms, and legs.",1
An employee was cutting a copper pipe when his thumb was caught in the handheld pipe saw. The employee sustained a laceration and possible fracture.,1
"On March 22, 2023, at 12:30 p.m., an employee was returning to her vehicle after delivering a package when she slipped on ice and fell to the ground, resulting in a fractured right ankle.",1
An employee's right thumb tip was amputated while they were slicing red peppers.,0
"An employee was cleaning strips of aramid fiber material out of the motorized roller table of an end mill trim machine. His glove was caught in the end mill's rotating bits, which pulled his hand into the machine. He suffered a laceration and a broken knuckle on the right hand.",1
An employee was walking backstage when she tripped on a panel/barrier attached to a pole and fell. The employee sustained shoulder fractures and was hospitalized.,1
"An employee was lashing containers to a vessel when the twist-lock mechanism on a container came loose and fell, striking the employee on the hardhat. The employee sustained a head laceration.",1
"A crane load fell during a rigging operation. It struck an employee and lacerated their hand. The employee was hospitalized, requiring surgery.",1
An employee was walking around the counter to the register when they fell to the floor and sustained a leg fracture.,1
"An employee was hooking up heaters and reinstalling wire in an unoccupied building.  As the employee worked on an electrical panel, it arced. The employee was injured and hospitalized.",1
A mail carrier tripped over a pipe sticking out of the ground and fell. Her tibia struck a landscaping rock and was broken.,1
"An employee was cutting metal on a band saw. As they went to clear metal, the blade amputated their right index fingertip.",0
An employee sustained a fingertip amputation from an armored truck door.,0
"On March 23, 2023, at approximately 9:00 AM, an employee was operating an automated saw. As the employee went to adjust the coolant sprayers, the rotating blades caught his glove and pulled his hand in, resulting in three left-hand finger amputations.",0
An employee was stocking the freezer and stepped on a wood pallet. The employee's foot went into the pallet and they sustained a right ankle fracture that required hospitalization and surgery.,1
"A temporary employee was attempting to remove a jammed pallet when the pallets crushed his thumb, resulting in a fingertip amputation.",1
"An employee was stepping out of his truck. He missed a step, fell, and hit his head on the ground.",1
"A winch operator was preparing to load a chassis into a pipe (gel dispensing equipment) to connect the ""mouse"" attachment and pull jacket material over the mouse and fill nozzle. The rope assembly pulled the injured employee's hand into the pipe, pinching their hand between the end connector and the pipe nozzle. The employee sustained a puncture to the palm and an index finger fracture.",1
An employee was moving an aerial lift outside to install lighting under an awning. The aerial lift drove off the loading dock and the rear wheels fell 3-4 feet to the ground below. The boom of the aerial lift struck the roll-up door of the loading dock and ejected the employee from the basket. The employee fell to the concrete floor and was hospitalized for a head injury.,1
"An employee was doing custodial work. As he bent to pick up a piece of trash, his knee buckled and dislocated. He suffered a broken kneecap that required surgery and hospitalization.",1
"An employee was riding in an all-terrain vehicle to pick up trash when the vehicle rolled over onto their leg, resulting in a fracture.",1
"An employee was transporting a chemical container. As the employee lifted it over an obstacle, chemical spilled onto the employee's left leg. The employee suffered chemical burns to the leg.",1
"An employee was setting up a cable tugger. A pin in the tugger came out, causing the equipment to move forward and strike his right middle finger. The fingertip was medically amputated.",1
"An employee was watching a demonstration while standing on a mat. She took a step back, lost her balance, and fell to the ground, sustaining a fractured hip.",1
An employee was spotting for a side loader so it could place a bundle of pipe in a rack. The bundle shifted and rolled toward him. A pipe struck his head and right leg.,1
"On March 23, 2023, at 10:23 AM, an employee was working on a sheeter outfeed conveyor table and installing the sheet diverter. As the assembly was lifted with a jib boom, his finger was caught between the hook and the part he was lifting, resulting in a finger amputation.",0
"On March 23, 2023, at approximately 10:30 a.m., an employee in training was removing a pin from the thumb of an excavator when his right middle finger was caught by a moving metal object, resulting in a fingertip amputation.",0
"At about 10:50 a.m. on March 23, 2023, an employee fell off the back of a farm tractor. The tractor's tire ran over the employee's left foot and lower leg, causing an injury that exposed bone.",1
A maintenance employee was cleaning a cylinder with a wire brush when their left little finger was caught by the rotating shaft on a handheld drill resulting in amputation of the last digit.,0
"An employee was assisting with straightening out a bent mudflap bracket using a jack. As the mudflap moved, the jack shifted causing the employee's hand to strike the bottom of the semi-trailer. The employee sustained abrasions and a fracture to the hand that required hospitalization and surgery.",1
"An employee was using a gasoline-powered cut-off saw to cut a section of guardrail bolted to a concrete bridge abutment. As he was completing the cut, the guardrail sprung out of its spot and fell downward onto the saw. This pushed the sawblade into the top of the employee's left foot, just behind the steel toe of his shoe. The employee sustained a laceration that required hospitalization.",1
A forklift struck an employee with its back end during a 180-degree turn. The employee suffered a fracture and muscle damage.,1
The injured employee was watching a co-worker operate a powered pallet jack when it pinned the employee's left leg against a piece of equipment. The employee's lower leg was broken.,1
"An employee fell on the floor and suffered a broken left tibia and fibula, as well as a dislocated left kneecap. She was hospitalized and required surgery.",1
"The injured employee was pulling a hot tub on a spa dolly that had rubber wheels. A second employee was pushing the spa dolly. While moving toward the back of the customer's house along a paved walkway, the spa dolly came off the walkway and onto the grass and the hot tub started to tip over. The spa dolly landed on the injured employee's legs resulting in a dislocated right ankle and torn tendons in the left ankle.",1
"An employee was loading dirty dishes into a dish washing machine when their foot caught on tile grout on the kitchen floor. The employee slipped and fell to the floor, resulting in a left hip fracture.",1
"On March 24, 2023, at approximately 1:00 PM, an employee was operating a forklift inside a trailer at a loading dock to offload material. A spotter truck began to pull the trailer away from the dock, causing the forklift to fall out of the trailer onto the pavement. The employee was hospitalized for a lower spinal compression injury and a torn muscle in the spine.",1
An employee was welding and tightening anchor bolts when they fell approximately 15 feet to the lower level. The employee was hospitalized with fractures to the arms and hips as well as an eye injury.,1
An employee was attempting to get the blade on a buffalo chopper unstuck when the blade lacerated their left palm. The employee was hospitalized.,1
"An employee was walking to his work bench to get his gloves when he tripped on a piece of plastic wrap that was hanging from the edge of a pallet. The employee twisted his ankle and fell, resulting in a right ankle fracture.",1
"An employee was loading a steel coil into a coil stand using a gantry crane. The steel coil fell. As the employee went to stop the coil from teetering on the ground, they sustained a toe and foot injury. The employee required surgery on their foot.",1
"An employee was taking a break to get water for himself and another co-worker. After retrieving the water bottles and returning to the second floor, the employee went to hand a bottle to their co-worker when they fell 17 feet through a 3-foot-by-5-foot opening onto the concrete floor below. The employee sustained rib fractures, spinal damage, and head lacerations.",1
"An employee was rotating a tire using a tire rotation machine when their leg was caught on the tire, resulting in a leg fracture.",1
"On March 24, 2023, an employee was performing a coolant flush on a car engine. As the employee pulled the hose out of the radiator, pressurized hot liquid released, causing burns to the employee's chest, neck, and face area.",1
"An employee was closing the back door to their trailer when their right middle finger became caught in the door, resulting in a fingertip amputation.",0
"An employee was sitting on a tug when they fell and struck their head on the ground, resulting in a concussion.",1
"An employee was toggling an air compressor when a nearby folder/gluer machine moved, causing a gear to strike the employee's finger. The employee sustained a partial amputation to the left middle finger.",0
An employee was loading a tanker in a receiving bay when the valve on the tanker truck actuated. The employee's hand was on the valve handle when it moved inward and crushed his right index finger against the valve body. The employee's fingertip was amputated.,0
A forklift struck an employee at a loading dock. The employee suffered a lacerated foot and was hospitalized.,1
"An employee was working in a man lift. As steel that was being cut broke free, it struck the man lift basket that the employee was standing in, jarring the basket and throwing the employee against the basket frame. The employee sustained rib injuries and was hospitalized.",1
"An employee was taking down scaffolding while on an aerial lift when they fell 18 feet from the lift basket. The employee sustained an aortic tear, head injury, and possible bone fractures.",1
"An employee was stepping up onto a loading dock when he lost his balance and fell backward to the ground, resulting in a lower back injury.",1
"An employee was on a surface two feet from the floor, checking the quality of a skid steer. As she pulled on a pin in the skid steer, she slipped and fell onto the floor, resulting in injuries to the right shoulder, face, and head.",1
"An employee was walking in the shop when they were struck by a van, resulting in left hip and elbow fractures.",1
An employee was preparing a jack stand when it fell and amputated their right index fingertip.,1
"An employee was leaving the hospital after their shift when they slipped and fell to the ground, resulting in a left shoulder dislocation.",1
"An employee was bending down to line up bobbins at the base of a machine. As he stood up, he placed his hand on the screen attached to the guard which then caved in. The employee's hand was pulled into the machine, causing an avulsion and lacerations to the left forearm.",1
"An employee became ill while operating a forklift. The employee was hospitalized, suffering from carbon monoxide poisoning.",1
"An employee was using a hydro blasting pump to clean the interior of a large oil storage tank when he slipped. The pressurized water from the wand then struck his leg, resulting in abrasions that required hospitalization.",1
An employee was operating a stand-up lift truck when the vehicle struck a rack. The employee sustained a left arm fracture.,1
"An employee was operating a reach truck down an isle. A pallet jack was approaching and the employee removed his foot from the pedal, causing the vehicle to stop suddenly. The employee's foot was then caught between the oncoming pallet jack and the reach truck, resulting in a left foot laceration and toe fractures.",1
"On March 25, 2023, an employee was preparing a hotel room for guest arrival. The employee went into the bathroom to retrieve a bag from the trashcan when they slipped and fell backward, hitting the toilet as they fell to the floor. The employee suffered abrasions to their left knee and hip.",1
An employee tripped and fell in a kitchen area she was cleaning and organizing. She landed on the tile floor and suffered a ruptured kneecap tendon.,1
"An employee was walking up a steel staircase to check wiring in the electrical room. The staircase had a top platform with a grate that was sitting across the beams of the platform. The grate had shifted and as the employee stepped on it, it gave way, causing him to fall approximately 3 feet to the ground below. The grate landed on the employee and he was hospitalized for four transverse process fractures in the lower spine.",1
"An employee was inspecting a vehicle when their finger became caught in a belt and pulley, resulting in the partial amputation of one right-hand finger and a fracture to another finger.",0
"An employee was walking toward their office when they slipped on the floor, which was wet from a snowstorm. The employee sustained a broken left patella.",1
"An employee was filling a water pail for coolant. After filling the bucket, the employee was walking back to his machine when he tripped on a raised piece of the concrete floor and landed on his right knee. The employee was hospitalized with a broken kneecap.",1
"An employee was standing on the footrest of a golf cart. When the driver made a left turn, the employee fell off the golf cart to the ground, resulting in a right hip fracture.",1
"An employee was working on a torque converter unit to remove a coupling hub using a hydraulic steel plunger and a hydraulic pump. As the employee relieved pressure in the pump, the hub released from the unit, crushing their left index finger between the hub and steel plunger's pushing disc. The employee's finger was partially amputated.",0
"An employee was pushing a cart with a mattress/box spring on top of it. The mattress hit a shelf, and the employee's right little fingertip was amputated.",0
An employee was walking to the parking lot when she stepped off a curb near the front entrance and tripped and fell. The employee sustained a hip fracture.,1
"An employee was stocking shelves when a box fell onto his foot, resulting in a right foot and toe fracture.",1
An employee suffered a lower back injury while lifting granite.,1
"An employee was taking down his camera and tripod to put it away. As the employee was collapsing the tripod, their right ring finger became caught in the tripod legs, resulting in a fingertip amputation.",0
"An employee was assisting a snubbing unit operator to service the well. While operating hydraulic tongs, the injured employee's glove was entangled in the rotating tong head, resulting in a right finger amputation that required hospitalization.",1
"An employee was struck by a forklift, resulting in a laceration to the left leg.",1
"An employee was counting and tagging merchandise shipments while walking in the receiving dock area when they were struck by a forklift, resulting in lower leg lacerations and hospitalization.",1
"An employee was operating a machine welder and was cleaning up flux when their glove was pulled into the auger, resulting in a laceration of the left middle finger.",1
"An employee was returning from lunch break and exited her vehicle. As she was walking through the parking lot, she was struck by a customer's truck. The employee sustained a severe head injury.",1
"An employee was using a cordless hammer drill with a hole saw attachment to drill a 3-inch hole into a chemical tank. The hole saw became hung up, causing the drill to kick back at the employee and strike him in the right eye. The employee sustained traumatic iritis.",1
"On March 27, 2023, at 1:30 p.m., a border patrol trainee was walking with his field training unit when he began to feel ill and lightheaded. The employee was hospitalized for possible heat exhaustion.",1
"A backhoe was lifting a 700-pound road saw while the injured employee was guiding the saw onto a van. The saw tipped from the back of the van and fell onto the employee, resulting in muscle strain and bruising.",1
"An employee was using a utility knife to strip wire in order to install an electrical panel. The knife contacted their palm, resulting in a laceration.",1
"An employee was stapling boxes when he lost his balance and the staple gun shot staples into his leg, resulting in a laceration to the right leg.",1
"An employee was shrink wrapping a pallet by hand when they tripped and fell to the concrete floor, resulting in a broken hip.",1
An employee was loading train cars from a landing when they fell 15 feet through the ladder hatch to the ground. The employee was hospitalized for a knee cap fracture and dislocated wrist.,1
"An employee was climbing down a 14-foot ladder after working from a scaffold in the boiler room when they fell to the floor, sustaining lacerations, fractured vertebrae, and a possible concussion. The employee was hospitalized.",1
An employee was cleaning a ribbon blender when the blades cut tendons on their right hand.,1
"On March 27, 2023, an employee fell from the back of a traffic truck while it was performing a U-turn. The employee landed on the ground and sustained injury to the neck and back.",1
An employee was troubleshooting a bag machine. The employee's hand contacted the belt and shaft resulting in amputation of the ring finger to the first knuckle.,1
"The injured employee was performing poultry butchering tasks when another employee went to remove a plastic shackle. The shackle fastener broke and broken plastic flew into the injured employee's right eye, resulting in a ruptured globe.",1
An employee was returning from lunch and went to disconnect a forklift battery from charging when he felt a shock and sustained burns to the back of his right hand. The employee was hospitalized.,1
"On March 27, 2023, at approximately 8:20 AM, an employee was performing routine startup tasks on a furnace that was shutdown. As the employee ignited the pilots, they sustained burns to the torso.",1
An employee was handling a pallet when a forklift broke the employee's right tibia. The employee was hospitalized.,1
An employee was spotting a mobile office trailer. The employee was caught between the trailer and a deck and suffered hip injuries.,1
"An employee was unloading a pallet jack from a truck. The pallet jack slipped off the truck and as the employee went to stop it from falling, his finger became caught in the wheel of the pallet jack, resulting in an amputation of the right index fingertip.",0
An employee was cutting a piece of laminate on a table saw. The employee went to retrieve the cut piece when the blade amputated their left middle finger above the first knuckle.,0
"An employee was performing routine maintenance and cleaning on a dirty water evaporator. The employee went to unclog the pipe and manually opened the fill valve. The pneumatic fill valve then closed on their right index finger, crushing it.",1
An employee was working on an operation line near a motor. The motor burned the employee's left forearm.,1
"An employee was hitching a converter dolly to a yard dog so that it could be moved. The yard dog drove forward and the employee was struck by the dolly, resulting in two fractures above the ankle.",1
"While moving bread, an employee tripped over an extension pole at the front counter and fell. The employee was hospitalized with a fractured left leg.",1
"An employee was clearing a jam in a half-gallon trimmer when their glove was caught, resulting in a fingertip amputation.",0
"An employee was unloading scrap tires from a forklift into a trailer. As the employee lowered the forklift mast to drop the tires, the tires became pinched between the forklift tines and the floor of the trailer. The employee then manually pushed the tires into the trailer and once free, the forklift tines lowered  onto his left ring finger, resulting in a laceration and skin loss.",1
"An employee dropped his utility knife into a mixer machine. As the employee went to retrieve the knife, his right arm was struck by the mixer blade, resulting in a laceration that required hospitalization.",1
"On March 27, 2023, at 10:40 AM, an employee fractured his left ankle after jumping into a 4 foot trench with uneven ground.",1
"An external contractor was cleaning the floor with a motorized floor scrubber when he smelled propane. The contractor got off the scrubber and opened up the compartment with the propane tank and took it halfway out to check connections. When he tried starting the scrubber back up, the scrubber erupted in flames and he sustained burns. The contractor summoned additional employees. While trying to extinguish the fire with a fire extinguisher, the scrubber exploded again and caused burns to another employee's head, face, neck, and left hand.",1
"An employee was on an elevated platform changing crusher screens. As he was standing in the middle of the guardrail, the screen pulled him over the side, causing the employee to fall 6-8 feet. He struck part of the crusher and the ground, resulting in two rib fractures.",1
"An employee was performing leak repairs on a roof when they fell approximately 15 feet to ground, resulting in rib fractures.",1
"An employee was exiting the showroom to the parking lot when they tripped and fell to the pavement, striking their head and knee.",1
"An employee was installing a coil fan in an air conditioning unit when the employee dropped the fan, resulting in a left forearm laceration that required surgery.",1
"An employee was installing solar panels on a residential roof and fell 16 feet, landing on hard surfaces including a deck railing and suffering two broken ribs and a bruised kidney.",1
An employee was holding a concrete pump hose when an air bubble in the hose caused it to kick out of the employee's hand. They sustained a crush injury to the right hand and middle index finger.,1
An employee was cleaning out the intake area of the cut-to-length machine when his hand was crushed by the machine. The employee was hospitalized.,1
"On March 28, 2023, an employee was changing ceiling tiles while working from a 6-foot A-frame ladder. The employee felt an electric shock, causing him to fall approximately 4 feet to the ground. The employee sustained a lower back injury.",1
A driver was training on a truck when he was pinned between the truck forks and the compactor being delivered. The employee sustained a fractured tibia and fibula.,1
"An employee was surveying land when a water truck tank began to fall off. The employee jumped out of the way and struck the truck's bumper, resulting in fractures to two ribs and the right hip as well as a punctured blood vessel.",1
An employee was signing dirt tickets from the driver when they were pinned between a dump truck and a bulldozer. The employee sustained a leg fracture.,1
"An employee was building a pre-hung door unit. After finishing the build, they were trying to close the door, but it wouldn't close. The employee then proceeded to fix the jam by reaching in the lock holes in order to pull the door. When the door unjammed, the employee's fingers became caught in the lock holes, resulting in amputation of the left middle finger.",0
"An employee was using an overhead crane to lift a bobbin. As he was lowering the bobbin, his hand was caught between the bobbin and the wheel, resulting in a left ring fingertip amputation. The employee was hospitalized.",1
"An employee was reseating a forklift's counterweight using a second forklift. With the counterweight on the ground, the employee was adjusting it and the support slings. The counterweight started to lean and fell forward, catching the employee's right leg against the first forklift's chassis. Their leg was broken.",1
"An employee was operating a gas-powered saw when they were exposed to carbon monoxide, causing them to fall off a 10-foot scaffold.",1
An employee was stowing packages when they experienced discomfort in their back and abdomen. The employee was hospitalized.,1
"An employee was climbing down a ladder when they slipped and fell approximately 10-14 feet to the ground below. The employee sustained a fractured and dislocated left ankle, shattered right heel, and fractured L3 vertebra.",1
An employee was working on electrical equipment when an arc flash occurred and the employee was burned.,1
"An employee was loading railroad ties for a customer. The employee cut the steel banding on the ties when the ties slid off the forklift and struck his right ankle, resulting in a possible fracture.",1
"On March 28, 2023, an employee was moving C-studs (16-gauge metal studs about 8 feet in length) using a forklift. When the employee cut the packing tape, he was struck by a falling C-stud, which pushed him to the floor. The employee sustained a fractured right hip and femur.",1
An employee was climbing down a ladder when his foot/leg became caught on a welding lead that was hung up on one of the rungs. He then lost his footing and fell 12-15 feet to the floor below and sustained a pelvis fracture.,1
"An employee tripped on a plastic tote behind a register, fell to the floor, and suffered a broken left hip. The employee was hospitalized.",1
"At 10:00 a.m. on March 28, 2023, a side plate of a forklift lifting apparatus came loose at the bottom. An employee was reattaching the plate to the apparatus when the plate displaced and landed on his left foot, just beyond the steel safety toe. He suffered a partial amputation to the third toe.",0
"An employee was using a press to stamp out washers from raw material. The press activated while his hand was near it. It crushed his right index finger at the first knuckle, and the finger was medically amputated at the knuckle.",0
"An employee was standing next to a tree and watching as an electrical pole was removed. The pole fell and struck the employee, fracturing their right ankle.",1
"On March 28, 2023, an employee was on a ladder removing an inflated sewer plug from a manhole. He was overcome by a gas and fell down to the interior base of the concrete manhole. He suffered an injury to a neck vertebra and was hospitalized.",1
"An employee was standing on a scaffold, cleaning, installing, and repairing pipes, when a 500-pound carbon steel enclosure struck the right side of the employee's back. The employee suffered broken ribs.",1
"A crew was preparing to replace a sheave on a spud on a platform barge. The spud was hoisted up with an excavator using a chain rigging so that the sheave could be changed. The injured employee was pulling the cable from the spud hoist drum to provide enough slack in the cable line. When additional cable was released from the hoist drum,  the chain rigging around the spud slipped, causing the spud to fall suddenly. The hoist cable quickly tightened and the cable raised off the deck of the barge. The injured employee was then struck by the one-inch, steel cable, resulting in a lower jaw bone fracture.",1
An employee was arranging stock on shelving units while on an A-frame ladder. The employee was descending the ladder when she fell to the ground. She was hospitalized with a fractured right tibia.,1
An employee sustained a partial amputation from a cutting blade.,0
An employee tripped in a hallway and suffered a broken right hip.,1
"An employee was working on the crawler system in a machine when the machine engaged, crushing his left arm.",1
"On March 28, 2023, at approximately 12:15 p.m., an employee was cutting a window radius casing with a custom radius saw when the saw kicked back, causing the employee's right hand to contact the saw blade. The employee's right index finger was medically amputated.",0
"On March 28, 2023, an employee was working as an arranger on a meat production line, removing bacon from the conveyor belt and arranging it on a table for packaging. The employee was taking bacon off the belt when their left middle finger was pinched in an opening between the transition plate and the conveyor belt, resulting in an amputation just above the knuckle. The employee was hospitalized.",1
"An employee was running wires through a facility from the attic when they misstepped and fell through, landing head-first on the concrete 18 feet below. The employee was hospitalized for skull and teeth fractures as well as a chin laceration.",1
"A driver had parked the truck and unstrapped the load. As she was picking up the load straps, her right hand was on the flatbed trailer. A forklift operator started to unload the trailer and a container came down on the driver's right ring finger, resulting in a fingertip amputation.",1
"An employee was on a forklift and fell to the ground. The forklift ran over and crushed the employee's feet, breaking both heels.",1
An employee developed a hernia while wringing out a mop. The employee was hospitalized.,1
"An employee was cutting joints out of acid bricks below the manway door inside a tower. He lost his balance and as he went to catch himself, the grinder he was holding lacerated the top of his left hand.",1
"An employee was on a ladder, changing filters on a second floor heat and air unit. The base of the ladder slipped and the employee fell to the floor. The ladder then fell on his lower leg, causing a compound fracture.",1
"An employee was operating a walk-behind skid steer when his thumb was pinched between the equipment and a crossbar, resulting in an amputation of the tip of the thumb.",0
"An employee was departing an airport gate area after walking out of a plane when they tripped on the seam of an unlevel carpet. The employee fell forward to the floor and sustained a fractured right shoulder/arm, right knee pain, a hip injury, and facial lacerations.",1
"Employees were securing a food cart to be lifted by a telehandler. The telehandler jerked forward while its boom was extended. The boom tipped down and crushed an employee's foot, causing an amputation.",1
"An employee was replacing a melted airline on a power take-off (PTO) drive line U-joint. He was holding a razor blade in his left hand and the airline in his right. As he put pressure on the airline with the blade, the blade shifted and cut through both the airline and his right middle finger, resulting in amputation.",1
"An employee was performing maintenance and removing fibers from a chain and sprocket. Slight pressure on the chain caused the sprocket shaft to spin freely. The employee's right hand was caught in the chain and sprocket, partially amputating their ring finger.",0
"An employee was trimming the excess concrete around a door frame for a tilt wall with a concrete saw. The saw caught on something, kicked back, and struck the employee, causing an 11-inch laceration starting high on the left side of his neck and traveling down his body at an angle.",1
An employee was hospitalized due to dehydration.,1
"An employee was straining demi-glace into a pot. The strainer the employee was using became heavy and hit the pot, causing the demi-glace to spill onto the employee's right hand. The employee suffered second-degree burns to the hand.",1
"An employee was walking out of a beer cooler through an automated overhead door. The door was closing and the employee bumped into it. He then stepped backward and fell to the floor, suffering a broken right lower leg.",1
"An employee had drained a sprinkler system through a hose to the parking lot. The employee lifted the metal grate covering the parking lot drain to get the hose more securely into the drain. When lowering the grate back into place, the grate snagged and dropped, catching the employee’s right middle finger and amputating it to the first knuckle.",0
"An employee was unloading sewage from a pump to a truck. When he disconnected the hose, he suffered steam burns to his right arm, lower abdomen, and left inner thigh.",1
"An employee was staging metal pallet pans on a hydraulic lift table when assembling cages. The hydraulic lift table experienced a mechanical failure and lowered down onto the employee's right foot, resulting in two fractured toes and a laceration.",1
An employee was repairing a trash pump used to treat water for drilling and fracking. The trash pump vapor locked and the employee was trying to get the pump started when the hose ruptured and they were exposed to a 12.5% bleach solution. The employee sustained chemical burns to their arm and leg.,1
"An employee was on top of an upside-down boat watching a crane remove metal plates when the crane moved in the direction of the employee with a metal plate attached. The employee jumped off the boat onto concrete 18 feet below to avoid being hit by the metal plate, resulting in fractured right and left ankles.",1
"On March 29, 2023, an employee was using a hand tool to clear dust from a sensor on an electric resistance welding (ERW) mill. An adjacent clamp actuated and crushed the tip of the employee's finger.",1
An employee was connecting a baggage cart to the back of a tug. The employee's right leg was pinched and lacerated between the cart hitch and the tug.,1
"An employee was on a roof when the material under his feet gave way. He fell 12 feet, suffering an injury to back vertebrae and a dislocated shoulder.",1
"An employee was on a 6-foot ladder chipping stucco off a wall. As he was descending the ladder, an extension cord became tangled around his feet, causing him to fall 4 feet to the concrete floor. The employee sustained an elbow fracture.",1
"An employee working in a landfill was operating an ATV when the brakes failed, causing the ATV to roll over. The employee was hospitalized with a broken rib and a tear to an artery.",1
"An employee was attempting to secure a temporary power service enclosure during a windstorm. The wind caused the structure to fall on the employee, resulting in a  T11 vertebra fracture.",1
"An employee was setting a skid steer bucket into a fixture. The bucket fell on his left foot, breaking the fourth metatarsal.",1
"A safety pin came out of a piece of equipment and struck an employee on the back. He then flipped over a handrail, fell 6 to 8 feet to the ground, and suffered a broken rib.",1
"An employee was clearing a jam on a heading planer and contacted the feed rollers, resulting in amputations to at least two fingers on the left hand.",0
An employee was picking up an outrigger pad when his right arm became caught between the moving outrigger and the outrigger housing. The employee sustained swelling in his lower right arm. He was hospitalized.,1
"An employee was soldering in a generator room when they tripped on debris that had been left on the floor, resulting in an injury to their left leg.",1
"An employee was unloading freight from a truck at a dock. When she opened the trailer doors, a partial pallet of product fell on her, knocking her to the ground. The employee was hospitalized with a back injury.",1
"On March 29, 2023, an employee was conducting maintenance on an upcut saw whose blade would not come up. He de-energized the saw and while the blade was slowing down, his left ring finger was caught between the pulley and belt inside the saw. The employee sustained an amputation to the finger without bone loss.",0
"An employee was pushing a cart loaded with 15 rounds of ammunition shells into an oven. The funnel broke off, causing an explosive to go off. The employee sustained burns on the right side of his head.",1
"An employee was putting a pallet down after pre-inspection of a seat. The pallet came down on the employee's left little finger, causing a fingertip amputation.",0
"An employee was picking up newspapers that fell from a machine that carried the papers from one side of the facility to the other. The employee's right index finger was caught in a vent hole on the machine's motor guard, and was partially amputated.",1
"On March 30, 2023, employees were testing the strength of a magnet on a machine during a training operation. The machine was activated and amputated the employee's left little fingertip.",0
"An employee was attaching a wrench to a drill rig rod. The wrench turned and struck the employee's right hand, resulting in a laceration and fracture to their index finger.",1
"An employee was using a grooving machine to put a lip on the edge of a pipe. His glove was caught in the machine, which amputated three of his fingers.",1
"An employee was climbing a power line pole when the pole broke at ground level while the employee was approximately 20 feet up. The employee rode the pole to the ground and sustained 12 broken ribs, a broken collarbone, and a punctured lung.",1
"A maintenance employee was cleaning a sensor on a press machine when the press moved, catching the employee's foot. The employee sustained a leg fracture.",1
"After emptying the bed of a dump truck, an employee lowered the bed and noticed that the tailgate locking pin had become wedged. The employee used a shovel from the truck to dislodge the pin. When the pin released, the tailgate latch pinched the employee's left middle finger above the first joint, resulting in a fingertip amputation.",0
"An employee was operating a palletizer. While attempting to reposition wire coil from a robotic stacker, the stacker engaged and pinned her against the metal guard opening of the palletizer. She suffered pneumothorax, a pulmonary contusion, and a rib fracture.",1
"An employee was troubleshooting an electrical cabinet when there was an arc flash, which burned his right hand and face.",1
"An employee was exiting a truck trailer. The employee fell while trying to step down onto the swing step, landed on their left side, and suffered a hip fracture. The employee was hospitalized.",1
"On March 30, 2023, an employee was walking to their workstation at the beginning of their shift and bent over to grab a piece of debris off the floor. They lost their balance and reached out to grab onto a product cage as they were falling. Their finger was caught in the cage, resulting in amputation of the right middle fingertip.",0
An employee was operating a cutting machine. It jammed. The employee was clearing the jam when the machine's blade amputated the tip of his thumb.,0
An employee was on a liftgate while removing dirty products from a van when he fell off the liftgate approximately 3 feet to the ground below. The employee suffered a broken left leg that required hospitalization.,1
"An employee was changing a tire on a dual-axle tow truck. The employee drove the truck onto a piece of block and removed the outer tire in order to access the inner tire. When putting the outer tire back on and shaking the truck, the inner tire fell off the piece of wood, causing the outer tire to knock him to the ground. The employee sustained a femur fracture and was hospitalized.",1
A lift truck operator was unstacking pallets of boxes in the middle portion of a railcar by hand in order to be able to enter the railcar with a forklift and remove the remaining pallets on the left and right sides of the railcar. A pallet on the right side of the railcar had shifted during transportation. A box fell from this pallet onto the employee resulting in possible fractures to their neck and right leg.,1
"A mechanic was checking and adjusting the automated sort machine when the swinging arm swung out and the hinge pinched his index finger, resulting in amputation.",0
"An employee got onto a ladder from a flat, one-story roof. The ladder slid; the employee fell to the concrete ground and suffered a head injury.",1
"An employee was trimming back rails on a table saw. He was clearing a piece of trim when the sawblade struck his hand, partially amputating a fingertip.",0
"An employee was moving a pallet from the new cooler warehouse to the old cooler warehouse using a forklift when their leg was caught between the forklift and a rack, resulting in a broken leg.",1
"An employee was on a roof inspecting windows. The employee fell from the roof to the ground, suffering a fractured skull, six broken ribs, and a broken leg.",1
"An employee was performing maintenance on a pump for a sulfuric acid system. Some of the acid sprayed out of a leak and burned the employee's face, neck, and head.",1
An employee fell while lifting a soda container and suffered a back injury.,1
An employee was processing ultra high molecular weight (UHMW) polyethylene inserts on a planer table. The distal portion of his right thumb was amputated by the blade of the planer table.,0
"An employee was conducting an inspection at a jobsite when they tripped over a chalk line and fell, resulting in a left femur fracture.",1
"An employee was riding his bicycle next to a hot condensate pit. He fell into it, suffered first- and second-degree burns, and was hospitalized.",1
"An employee was lifting items with a forklift when the forks fell and landed on his left foot, resulting in a fractured foot.",1
An employee was processing an order when their left hand was caught in the slip roller. The employee sustained an amputation and was hospitalized.,1
An employee was cleaning product from a belt and sustained a laceration to the right hand that resulted in surgical amputation of digits.,1
"An employee was on a roof giving a tool to another employee when a piece of green board sheet rock blew off the roof and struck the employee. This caused the injured employee to fall 12 feet to the ground below, resulting in an elbow fracture and back injuries.",1
"An employee was climbing down a step ladder. He missed a step and fell backward onto the concrete floor, breaking his hip.",1
An employee was driving a concrete pump truck when it made contact with overhead power lines. The employee was shocked and was hospitalized.,1
An employee was walking down the steps leading to a parking lot when they missed a step and sustained an ankle fracture. The employee was hospitalized.,1
"On March 31, 2023, an employee was retrieving a lock ring from a CNC machine when a burr on the lock ring lacerated his forearm. The employee was hospitalized.",1
An employee was clamping a part onto the pipe bender machine when they sustained a partial amputation to the left index finger.,0
"On March 31, 2023, an employee tripped over a curb in a parking lot and suffered a broken kneecap and left arm.",1
"An employee was standing by a hose reeler as it wound a 6-inch drag manure hose. A 6-inch aluminum coupler failed and struck the employee's leg, breaking the tibia and fibula.",1
An employee fell off a fixed ladder and injured his wrist.,1
"An employee tripped over pavement on a walkway and fell, resulting in a broken left arm.",1
"An employee was rigging a piece of metal that weighed 434 pounds. He hooked the clamp to the gantry crane and stood the base plate on its end to check the balance and placement of the clamp. The employee then raised the plate and swung it over to the steel column. The baseplate bumped into the column and the clamp released. The employee's index, middle, and ring fingers were lacerated by holes in the base plate as it slipped against the column and fell to the floor. The index and middle fingertips were amputated.",0
"On March 31, 2023, at 12:30 PM, an employee was entering the lower level basement door while carrying items after a local rain storm. She tripped on a rug and landed on her left hip, resulting in a hip fracture that required hospitalization.",1
"An employee was trying to close a service drive rear door leading out of a hospital. When he tried to close it from the inside, it did not close entirely. He went outside and tried to pull the door the rest of the way down. His right ring finger was caught and pinched in a seam between door panels as the door came down. He suffered a partial amputation of the fingertip and fingernail.",0
"An employee was clearing a jam or feeding tape into a machine when it activated, resulting in a fingertip amputation on the left hand.",0
"An employee was hanging up a safety backpack. As they stepped back, the employee tripped over a child and landed on the corner of a toddler table, resulting in rib fractures and lung damage.",1
"A steel column was being installed using a 30-ton crane. The column knocked over a scissor lift, causing its operator to fall 25 feet with the scissor lift and then be ejected from the basket. The employee landed on the ground about 5 feet away from the fallen basket and suffered a broken back.",1
An employee was climbing an extension ladder out of a 15-foot deep trench when he lost his footing and fell 15 feet to the ground below. The employee suffered a  femur fracture.,1
"An employee was attempting to close an outlet valve due to a power outage. He stepped over an angle iron and fell 12 feet into an open coolant pit filled with 3-4 feet of machine coolant. The employee was hospitalized with lacerations, bruises, a muscle injury, and fatigue.",1
"An employee was operating an enrober and diagnosing a problem with chocolate flow on the bottomer. While checking for a blockage on the infeed of the decorator chocolate well, his right index finger was pulled into the rollers and amputated at the first knuckle.",0
"On April 1, 2023, at 4:04 PM, two employees were talking as one employee stowed his belongings in the prep room. One employee began showing the injured employee his gun when it fired. The injured employee was shot in the arm and required hospitalization and surgery.",1
"An employee was using a powered pallet jack to move a fixture. His leg became caught between the pallet jack and the fixture and he fell on the same level, resulting in a fractured left fibula.",1
"An employee was changing an injection mold weighing approximately 660 lbs. on a press when the mold fell and crushed the employee's left ring finger, resulting in a partial amputation.",0
"An employee was cleaning a grease and dirt mixer while in a general work area that contained aerosol cans of brake cleaner as well as lubricants. The employee started welding a crack on the mixer when the welding sparks ignited the aerosol cans and the work area. The employee suffered third-degree burns to his face, arms, abdomen, and legs.",1
An employee was checking for debris through the back door of the balancer when the cutting wheel cut his right ring finger up to the first knuckle. Part of the finger was medically amputated.,0
"A lighting technician was focusing and programing lights on a stage when they fell off a 4-foot high stage, fracturing their arm and hip on the ground.",1
"On April 1, 2023, an employee was adjusting a product in the roll unwind station when the clamp activated, resulting in a thumb injury.",1
An employee was prepping food when the knife amputated their thumb tip.,0
An employee was stocking chips while on a step ladder about 3-4 feet above the ground. The employee lost balance and fell to the ground. The employee was hospitalized with a muscle tear and required surgery.,1
"An employee was feeding a conveyor belt when an acrylic shield fell and struck them, causing a possible concussion.",1
"On April 2, 2023, at 4:30 AM, an employee was on his way to start his vehicle in the parking lot when he slipped and fell hitting his head on the asphalt. The employee sustained brain bleeding/swelling requiring surgery.",1
"On 4/02/2023, at 5:55 AM, an employee was carrying a box of detergent when he slipped on the floor and fell, landing on his left knee. The employee was hospitalized with a knee injury that required surgery.",1
Two employees were unloading mail from a truck at a dock door when a powered industrial vehicle (PIV) struck and pinned the injured employee against a mail container. They sustained a pelvis fracture.,1
An employee was in a backroom putting merchandise into storage bins when a nearby steel beam that was leaning against the wall fell and struck their head. The employee was hospitalized with a  concussion.,1
"An employee was on a catwalk pressure washing the inside of a feather dryer to prepare it for maintenance. The employee's knee pad slipped, causing him to lose his balance and move forward. The stream from the pressure washer contacted his left index finger, resulting in a laceration that required hospitalization.",1
"An employee was operating a forklift to move products in a warehouse when the forklift struck a pole. This caused him to strike his forehead against the forklift frame, resulting in head trauma.",1
"An employee was preparing to cut pipes with a portable band saw. He undid the tie wire and leaned one end of a 20-foot long pipe on a removable rail. As he went to move the pipe, a different rail was knocked over. The rail fell onto the employee and struck his left leg, resulting in a left tibia/fibula fracture.",1
"An employee was working on a roof elevation. They grabbed a sheet of plywood from the roof that was covering a hole and roofing membrane. The employee fell 16-17 feet through the hole to the ground, resulting in a fractured pelvis and rib fractures.",1
"An employee was walking out of an office while a resident was coming down the hall in his wheelchair. The employee tripped over his wheelchair and fell, resulting in right arm and leg fractures.",1
"On April 3, 2023, an employee was removing a piece of plastic from a machine when the machine cycled and the employee's right index finger was crushed between the forming die box and the forming head of the machine. The employee sustained a partial finger amputation.",0
"An employee was on a fixed ladder adjusting the tarp on his dump truck when the tarp pulled loose quickly and he lost his balance. The employee then fell to the ground, resulting in broken ribs.",1
"An employee was using a ladder to access the attic door. The employee fell and their finger was caught between the ladder and a metal bracket, causing an amputation at the first knuckle.",1
An employee was unjamming two small boxes on the case maker when their finger came in contact with the sprocket of the conveyor. The employee's right ring fingertip was amputated. A guard was in place at the time.,0
"An employee was clearing an obstruction from the air valve when the valve closed on the employee's hand, resulting in a right middle fingertip amputation.",0
"An employee was signaling a trackhoe to connect a 37-foot long, 36-inch steel cement-lined pipe to an existing pipe. While pulling the pipes together, the strap around the pipe slipped and struck the employee across his right hip and left shoulder.",1
An employee was driving a stand-up forklift in the warehouse. The forklift drove over a piece wood and the employee's foot became pinned between the forklift and a wall. The employee's foot was crushed.,1
An employee was walking to pick up a newborn calf in a corral when they were struck from behind by a cow. The employee was knocked over and sustained a head injury and fractured ribs.,1
"An employee was observing work on a blow wheel machine during training. As the employee's hand was on the cam track, a co-worker manually moved the blow wheel and the employee's right thumb was pinched between the track and the moving cam on the track, resulting in a fingertip amputation.",0
"An employee was loading a drill into the spindle of a drill machine when his left index finger was pinched between the spindle and the oil splashguard, resulting in a fingertip amputation.",1
"An employee was removing roof panels when the roof gave way and the employee fell to the ground, landing on his feet and then hitting his shoulder. The employee suffered two broken ankles and a dislocated shoulder.",1
An employee tripped on the edge of the sidewalk while walking into work and fell to the concrete. The employee was hospitalized with a fractured arm.,1
An employee was removing a rope reel from an electrical line that was being pulled for tension. The reel fell and struck his left hand; his hand was caught between the truck-mounted bucket and the reel. The employee's left little finger was crushed and the fingertip was medically amputated.,0
"An employee was working on a production line installing shear mount devices to a truck frame. As she was installing the second shear mount to the frame, the employee's left foot and ankle contacted the carrier draw bar and running gear below the floor. The employee sustained a severe laceration to the back of her lower leg and foot area.",1
An employee was loading palleted joint baskets onto a flatbed truck using slings. Baskets on the flatbed began to tilt and the employee fell/jumped from the flatbed. Baskets then landed on their legs and the employee sustained a suspected tendon rupture in the right knee.,1
"An employee was standing at the register helping a customer when their leg gave out, causing them to fall to the floor and sustain a right hip fracture.",1
"On April 3, 2023, an employee was opening a folding side-view truck mirror when her finger was caught in the pinch point where the mirror pivots. She sustained a partial amputation to the left index finger.",0
"An employee and co-workers were picking up trash and scrap plywood at a job site. The employee attempted to pick up loose 4x8 plywood on a concrete deck. When the employee stepped forward to get a better grip on the board, he fell 10 feet through a roof hatch opening to the concrete floor. The employee suffered a bump on back of his head, a laceration on the liver, rib fractures, broken processes on three vertebrae, cut hands, two lost finger pads on one hand, and fluid pressure against the right lung.",1
An employee had climbed a pallet jack to retrieve cases when they slipped and fell onto their left elbow. Their elbow was dislocated.,1
"An employee slipped and fell down the stairs, resulting in right ankle fractures.",1
"A temporary employee was working on a line painting purple bands on pipes. The employee was squatting under the pipe at the inbound area with his right hand holding the paint roller and his left hand balancing against the pipe rack. One of the pipes rolled, striking him, and catching his left little finger between the pipe and the pipe rack. The employee sustained a distal fingertip amputation.",0
"An employee was sandblasting when the nozzle of the sandblaster became clogged. While unclogging the nozzle, the trigger was activated and pressurized air and sand were discharged resulting in injury to the employee's arm.",1
An employee fell from a garbage truck and struck their head on the ground. The employee sustained injuries to their head and ankle.,1
An employee was visually inspecting the ceiling of an apartment while standing on a step ladder. The employee fell to the floor and sustained fractures to the hip and arm.,1
"An employee was on the belted manlift when they fell to the floor, resulting in a collapsed lung and multiple fractures to the ankle, ribs, shoulder, and back.",1
"A temporary employee was operating a forklift when his leg was caught between the vehicle and he bottom of a rack, resulting in a left ankle fracture.",1
"An employee was getting the clutch rig up when the clutch rolled over, crushing the employee's right little finger and resulting in an amputation.",1
"An employee was trying to dislodge a 4-inch metal cone off of a 15-inch metal rod by striking the rod against a fixture. His left index finger became caught between the cone and the fixture, resulting in amputation of the fingertip.",0
"An employee was on a three-step ladder fixing a motor on the incline conveyor. As they were stepping down from the ladder, the employee slipped and their foot became caught between the bottom and second steps. They were hospitalized for a shin fracture in two places.",1
"An employee was climbing down from the cab of a front-end loader, missed the last step and fell to the ground. The employee sustained a hip/leg contusion and a fractured femur.",1
"An employee was working on a hot water heater located in the attic of a new industrial building. The employee descended the attic on a fold-down ladder when he fell approximately 9 feet to the cement floor, resulting in a fractured L1 vertebra.",1
"An employee was receiving a solar panel from an employee at the ladder when they fell from the roof to the ground, resulting in multiple fractures.",1
"An employee was performing preventative maintenance on a V-belt conveyor drive motor. The motor chain pulled the employee's rag and right hand into the chain and sprocket, resulting in an amputation.",0
"An employee was working on a ladder while applying stucco to a home when they fell off the ladder to the ground below, resulting in fractures to both arms.",1
An employee was on her way to drop off mail at the mailbox and stopped to talk to another employee. She took a step over a curb that was 4-5 inches from the lower pavement when she fell onto the pavement and sustained lacerations and contusions on her face as well as trauma to the left shoulder and hip.,1
"An employee was placing the metal cylinder head of an engine into position on a work table. The employee placed his hands under the cylinder head when the tip of his left middle finger was crushed, resulting in a fingertip amputation.",1
"An employee was operating a gluer when the machine jammed, causing a belt to come off track. The employee went to clear the jam and realign the belt when the machine jogged, pinching their right ring finger between the belt and roller and amputating the fingertip.",0
"An employee was taking inventory while on an order picker elevated at approximately 16 feet when they fell to the warehouse floor. The employee sustained a head laceration, liver laceration, and fractures to the pelvis, wrist, and femur.",1
An employee was loading parts from one conveyor to another conveyor when her left index fingertip was amputated by the chain and sprocket.,0
"An employee was preparing to board a front-end loader at the end of the work day. He was standing at the base of the equipment when he was struck by a material handler. The employee was then dragged 15-20 feet by the material handler, resulting in head abrasions and a fractured left leg that was medically amputated.",1
"An employee was making adjustments to a machine when the bent arm of the machine caught their left middle fingertip, resulting in an amputation.",0
An employee was using a mini skid steer to get another vehicle unstuck from the mud when his foot slipped and was pulled in between the track and the guide wheel. The employee sustained a left foot fracture.,1
"An employee was clearing a jam in a press welding machine. The machine activated and the guard came down onto their arm and hand, resulting in fractures.",1
"An employee arrived to work in the deli production area when they slipped and fell, resulting in a brain bleed.",1
An employee was delivering mail to a residence when they were attacked by a dog. The employee was knocked to the ground and bitten on the left leg.,1
"An employee was in the middle of a roundabout when they were struck by a vehicle, resulting in injuries to their head, neck, back, hips and legs.",1
"An employee was walking down an aisle when a flower display cage fell on top of her, resulting in injuries to her left leg and hip that required hospitalization.",1
"An employee was operating a manual tube lathe when a piece of metal stringer (twine rope) caught his left forearm, resulting in a laceration. The employee was hospitalized and had surgery.",1
"An employee was moving a concrete grade ring and placed his finger between a wood pallet and the grade ring, resulting in a right middle fingertip amputation.",1
"An employee was entering a building to begin his shift when his finger became stuck in the door, resulting in a fingertip amputation.",1
"An employee was leaving her workstation to take a break. She tripped over a box and fell, striking her head on the floor. The employee sustained head trauma and a laceration on face from her glasses.",1
"An employee was completing lawn service tasks. As they went to step onto equipment, they slipped and fell to the ground sustaining a left tibia fracture and a right elbow sprain.",1
"An employee was testing an actuator and holding a part near the valve when the actuator was pressed. The valve then closed on the injured employee's finger, partially amputating his right ring fingertip.",0
"An employee was troubleshooting a motor while approximately five rungs up an extension ladder that was leaning against a chiller. The feet of the ladder slipped out and the employee fell to the ground, resulting in a tibial plateau fracture.",1
"An employee was loading pallets onto a truck while stabilizing the pallets with his hands. A second employee went to move the stack of pallets with a pallet jack when the injured employee's hand became caught between the pallet jack and the pallets. As the employee pulled their hand away, they sustained a right index finger avulsion.",1
"An employee was moving equipment when they were struck by a forklift, resulting in rib fractures.",1
"An employee was operating a forklift to transport a die. The transport shackle shifted, pinching the employee's finger between the shackle and the edge of the die. They sustained a left index finger amputation at the first joint.",0
"An employee was disconnecting a hydraulic valve when it blew off and struck them, resulting in injury to the upper chest, neck, and head.",1
"An employee was in the bucket of aerial lift installing new cables on telecommunication poles after storm damage. The cable was lifted onto hardware that was attached to the pole. The cable hardware broke, causing the cables to fall onto the employee, resulting in fractures of the jaw and orbital bone, facial lacerations, and nerve damage.",1
"An employee was placing bars of aluminum stock into a CNC lathe machine. As the employee started the machine, he noticed a bar sticking out of the back of the lathe. As he went to grab it, the employee's right wrist area was struck by the bar. He sustained multiple fractures and lacerations to the right hand and wrist.",1
"On April 4, 2023, at approximately 12:10 AM, an employee was operating an all-terrain vehicle (ATV) through a brush area when they fell off the vehicle. The employee sustained a left shoulder injury and a collapsed lung that required surgery and hospitalization.",1
A traffic control employee was assisting a homeowner who was backing out of their driveway when they were struck by an excavator traveling in reverse. The employee sustained a hip and foot fracture.,1
"An employee was riding on the back of a garbage truck when a low tree limb approximately 10.5 feet off the ground and 12-18 inches in diameter hit the top of the truck. The tree limb broke off the tree and struck the employee's leg, resulting in a broken leg.",1
"An employee was setting a 15-ton concrete beam when it fell, striking the employee's right leg. The employee sustained a leg fracture that required surgery.",1
"An employee was working on a vent on the roof. As they were changing a belt in an air handler system, their finger became pinched by the belt/pulley, resulting in a left ring finger amputation. The middle finger was injured as well.",0
"An employee was repositioning a chill adder so that the pig tubs behind it could be removed. The employee lost their balance and their finger was pinched between the chill adder and the pig tub, resulting in a fingertip amputation.",0
"An employee was standing at the rear of a garbage truck loading trash when the front passenger tire struck his ankle/foot. The employee was knocked down and the tire rolled over him, resulting in fractures to his ribs and ankle.",1
"An employee was on a center-ride electric pallet jack retrieving empty pallets to move to another area. The employee's body struck a bollard, resulting in a left thigh contusion.",1
An employee was using an auger machine when it stalled. The employee went to check the motor and pulley when the auger started back up and injured their right index and middle fingers.,1
"An employee was installing bolts using a pneumatic torque wrench when the wrench contacted their left index finger, resulting in amputation.",1
An employee was delivering mail when they tripped and fell resulting in a hip injury.,1
"An employee was cleaning the truck using a pressure washer. Upon finishing, the employee went to wash the hand towel that he was holding. When he started spraying the water, it cut through his work gloves, resulting in a laceration on the back of his hand. The water entered the wound and it began to swell.",1
"An employee was removing material from a roll when they slipped and fell on the concrete floor, resulting in a fractured right hip.",1
"An employee was working at a carwash and motioning for a customer to come forward when they were struck by the car, resulting in fractures to the left hand and ribs.",1
An employee was working with a hydraulic spreader bar in a boom assembly when a metal part struck the employee in the head. They sustained a head injury that required hospitalization.,1
"On April 5, 2023, an employee was using a torch to melt product away from the tap hole of a furnace. The employee felt an electric shock in their left arm, which cased them to drop the torch and resulted in electrical burns to their arm and hand.",1
"An employee was using a manual pallet jack to move a catwalk frame to the overhead crane. The employee slipped and fell backward onto the ground, resulting in an L1 compression fracture.",1
An employee was putting a dog into a kennel when they slipped on a wet spot on the floor and fractured their left leg/ankle.,1
"On April 5, 2023, at 7:00 a.m., an employee was using a pry bar on a piece of steel being moved by an overhead crane. The piece of the steel he was prying against slipped and landed on his right thumb, resulting in an amputation.",1
"On April 5, 2023, at 7:00 p.m., a temporary employee was using a saw machine to make a skid when the blade contacted his finger. The employee suffered a laceration that resulted in in a fingertip amputation.",0
"Two employees were insulating ductwork on the first floor of a job site. The angle iron holding the hoist that the ductwork was suspended from failed, causing the falling ductwork to strike the injured employee who was hospitalized for a left hip dislocation.",1
"An employee was transferring gravy in a pan to the serving line when her right foot got tangled with a water hose on the floor. The employee tripped and fell, resulting in a concussion and a face contusion.",1
An employee was conducting a post-trip bus inspection when their pant leg was caught on the crossing arm of the school bus. The employee fell to the ground and sustained a right hip injury that required hospitalization and surgery.,1
"A forklift moved a steel coil into a vertical position on the ground. The coil began to tip forward. As an employee stepped in to steady the coil, it fell onto their right foot, resulting in a right ankle fracture.",1
"An employee was rearranging boxes on an inventory shelf. While maneuvering one of the boxes, the employee shifted his footing, stepped/slipped off the step ladder they were standing on, and fell to the ground. They sustained a scapula fracture and rib fractures that resulting in a punctured lung.",1
"Employees were inside a building, replacing the fuel filler hose on a boat. The fuel filler hose runs down the port side of the boat and under the deck to the fuel tank which is mounted in the center of the hull. The employees used an electric heat gun to soften the thick rubber hose to allow for installation. A flash fire occurred in the gasoline fuel tank on the boat. An employee sustained first-degree burns to the face and second-degree burns to both hands. The employee was hospitalized.",1
An employee was working on the well head when the service brake broke causing the elevator to fall on their hands. The employee sustained bilateral hand fractures and was hospitalized.,1
"An employee was troubleshooting a machine while another employee put a purge compound in the machine and began the purge. The injured employee's fingers were pulled into the gear and drive belt, crushing them. The index finger on his right hand was partially amputated.",0
An employee was receiving an overview on how to clean out a piece of the top dressing machine when it gets jammed with pearlite. The employee went to feel the roller grooves when the machine activated and amputated his right index fingertip.,1
"An employee was standing on a piece of scrap plastic decking while rearranging pallets. As the employee crouched, they fell 1 foot to the concrete floor, resulting in a contusion.",1
An employee was operating a stand-on fertilizer spreader when the fertilizer spreader rolled on top of employee. They sustained rib fractures and a possible spleen rupture.,1
"An employee was guiding a forklift that was moving a boiler unit. The unit shifted and began sliding off the forklift arms. The boiler fell and pinned the employee against the wall, resulting in a spleen laceration as well as rib fractures.",1
"An employee was manually digging a trench for a propane tank when he twisted his back, resulting in a muscular injury. The employee was hospitalized.",1
An employee was cleaning up the street when he was struck in the forehead by a log that fell 20 feet from a tree that was being cut down. The employee sustained a head injury.,1
An employee was on a ladder while descending the cab of a crane when they fell off the ladder to the ground below and sustained broken ribs.,1
An employee was bending a metal part in a brake press when their right index fingertip was amputated.,1
An employee was loading stock tanks in the side yard when the tanks blew over and fell on them. They sustained a pelvis fracture.,1
An employee was working on a shredder. He used a hammer to remove a pin when a metal piece flew into his abdomen.,1
"An employee was moving an all-terrain vehicle (ATV) from storage to another location. The tire gripped the asphalt, causing the ATV to roll over. The employee was thrown to ground, resulting in rib and sternum fractures as well as a punctured lung. The employee was hospitalized.",1
"An employee used a forklift to take a trash hopper to the dumpster. While driving back from the dumpster, the cord that had been used to open the hopper handle got caught under a wheel of the forklift causing the cord to tighten around the employee's left hand. The employee sustained amputation to the index, middle, and ring fingers.",0
An employee was positioning a shackle onto a transition wheel to hang carcasses on the incline chain. The shackle twisted and the employee's right index finger was pinched between the shackle shaft and rail guide plate. The employee sustained a partial amputation to the fingertip and a distal tuft fracture to the finger.,0
"An employee had just arrived at the log yard and was loosening straps on a log truck. An 11-foot log came off the trailer and struck the employee, resulting in injuries to the C5 vertebra and left ankle. The employee was hospitalized",1
"An employee was feeding a board through a planer. The board became lodged and as the employee went to fix it, his finger was caught in the machine. The employee sustained a left middle fingertip amputation.",0
An employee was removing a piece of scrap from the press die head when the machine was jogged for a tool adjustment. The injured employee sustained a partial amputation to the right middle finger.,1
"An employee was walking upstairs to his office when he felt sharp pain in his right knee, resulting in a strain or sprain injury that required hospitalization.",1
"An employee was using a forklift to move empty plastic totes that were stacked three levels high. As the employee was driving the forklift toward the bottom pallet, the totes were pushed against the middle bar of the material rack. This caused the plastic totes to fall onto the overhead guard of the forklift where the employee's hand was resting. The employee sustained a right middle finger fracture.",1
"An employee was stepping from a ladder onto a roof when he slipped and fell to the ground, resulting in a chipped vertebra.",1
An employee was helping to unload patio doors from a forklift. The wind caused the patio doors to lift and fall onto the employee. The employee suffered jaw and ankle fractures.,1
"An employee was putting crushed 55 gallon drums in a dumpster into a recycle trailer using a forklift. The dumpster was raised about 5.5 feet off the ground on the forks of the forklift. As the dumpster rolled forward, their left index finger was pinched between the dumpster frame and the forklift fork and the fingertip was amputated.",0
A deli employee was slicing cheese when their right middle fingertip contacted the slicer blade and was amputated.,0
An employee was performing continuity testing on an HVAC connection when an arc flash occurred. The employee sustained burns to their face and both hands.,1
An employee was working from a ladder installing a pipe overhead when the employee lost their footing and the ladder slipped. The employee fell 10 feet to the ground and sustained a head injury and rib fracture.,1
"An employee was preparing to pick up two steel, round bars to be loaded into a truck. In order to have space for the lifting tongs to grab the bars, the employee needed to move the wedges to space the round bars out. The tongs were resting on the round bars and as the employee reached between the tongs and the round bar to move the wedge, the tongs fell on the employee's hand, pinching it between the tongs and the round bar. The employee sustained crush injuries that required surgery.",1
"An employee was operating a baler machine. As the employee went to clear a piece of wire from the machine, it cycled and penetrated their right arm, pinning them in place and resulting in crush injuries to their arm and hand. The machine was not locked out at the time of the incident.",1
"An employee slipped on water on the floor and fell, resulting in right shoulder and neck injuries that required hospitalization.",1
"On April 6, 2023, an employee was operating a forklift when the forklift flipped over and pinned the employee against the floor. The employee was hospitalized with a right arm fracture.",1
"An employee's middle finger was caught in a doorway, resulting in a fingertip amputation without bone loss.",0
"An employee was working from the bucket of a bucket truck. After completing his work, the employee lowered the boom of the truck and exited the bucket onto the truck. As he was exiting, he tripped on the door frame opening, fell onto the rear deck of the truck, and then to the ground. The employee suffered an injury that required hospitalization.",1
"An employee was preparing to disassemble equipment for cleaning by using a metal pick when the pick slipped and punctured the employee's left index finger, resulting in hospitalization.",1
"An employee was working at the disassembly table to remove and replace a hexagonal hub in a steel disk piece from the hot rolling mill. The outer steel ring of the piece collapsed and fell to the ground, striking the employee's foot. The employee was hospitalized for a dislocated right ankle that required surgery.",1
An employee was operating a rider forklift when his leg was caught between the vehicle and a fixed post. The employee sustained a fracture and lacerations to his leg.,1
An employee was unloading a shaft from a routing machine when the shaft disconnected from the magnet apparatus and struck the employee's right forearm and fractured it.,1
"A temporary employee was using a push broom to push recycling waste onto a conveyor belt that makes bales of recycling material. The employee was cleaning between two bales of recycling material when one of the bale wires snapped. The employee's legs became tangled in the wire, causing them to trip and fall. The employee suffered a fractured right leg.",1
An employee sustained burns when boiling water splashed onto their ankle.,1
An employee was retrieving an item from his vehicle when he slipped and fell on the concrete. The employee was hospitalized for a left tibia/fibula injury.,1
"An employee was working on a belt in an air handling unit and disconnected the power source. As the fan belt was coming to a complete stop, the employee's left fourth fingertip was amputated. The employee also sustained a displaced fracture of the left second finger and a laceration to the third finger at the distal-most joint.",0
An employee was transporting a patient in a bed and crushed his hand between the bed and the wall.,1
"An employee was on a concrete barrier when he fell to the ground, resulting in a right leg fracture.",1
An employee was using a saw when they sustained a left index finger amputation.,1
An employee was walking toward the exit of a saw shop to retrieve a bottle of water when they slipped on water on the floor and fell. The employee experienced back pain.,1
"An employee was sanding a shaft using a lathe machine when their glove was caught in the rotating shaft, resulting in a right hand finger amputation.",1
"On April 7, 2023, an employee was using a utility knife to cut a wire-tie off of a new hose when the knife contacted the inside of the employee's left arm. They sustained a laceration that required stitches and hospitalization.",1
An employee was conducting HVAC work when a valve released from the system and contacted their left hand. The valve punctured their left hand at the center of the palm and filled their left hand and arm with nitrogen.,1
An employee was on a painters' scaffold applying drywall paint and fell to the floor. The employee sustained skull and scapula fractures.,1
"An employee slipped on a wet floor and fell, sustaining a leg fracture.",1
"An employee had just dismantled a hoist and was putting it in an upright position to remove the motor. As the track was lifted, the feet slipped out of the track, causing the motor to fall onto the employee's right leg and pin it to the ground. The employee sustained a right tibia fracture.",1
"Two employees were in a man basket removing forms from under a bridge. After the employees removed a C-channel from the final form, the C-channel was supported by the man basket handrail to be lowered to the ground. The employee's hand was resting on the handrail on the descent when the C-channel rolled, crushing his hand between it and the handrail, resulting in an amputation.",0
"On April 7, 2023, at approximately 9:30 AM, an employee finished removing a coupler and was between a the boom and stationary digging bucket on the ground. The excavator activated and swung toward the bucket. The employee sustained a crushed pelvis.",1
"An employee was holding up plywood that was stacked against a wall in order for a co-worker to retrieve tools behind it. The employee lost control of the plywood and stumbled backward, falling and hitting their head against the blacktop. The employee sustained a head injury.",1
"A maintenance employee was working on an air cylinder on the log deck that was not operating properly. The employee entered the area and while troubleshooting, the air cylinder actuated. The employee's hand was pinched by an arm that came down, resulting in a crush injury to the left hand.",1
"An employee was reaching inside a skid steer to retrieve a trash bag when the motion lever activated, causing the vehicle to travel forward. The employee was struck in the leg and sustained a leg injury.",1
"An employee was making a pizza delivery on an E-bike when the front tire fell off the bike, causing the employee to fall to the concrete ground and sustain a facial fracture.",1
"An employee was evaluating an issue with a shaft in a winder. The employee's left index, middle, and ring fingers got caught between the belt drive and sprocket, resulting in one finger amputation at the first joint.",1
An employee was slicing deli meat and sustained a laceration to the right thumb.,1
"An employee was working as a cashier when she tripped over an electrical cord and fell, resulting in a closed fracture of the pelvis.",1
An employee was using a miter saw to cut a cardboard core when the sawblade amputated the employee's fingertip.,1
"An employee was replacing bolts on the sawmill chip bin auger coupling. As he was replacing the last bolt, the system activated, catching his leg and causing him to fall through the auger system. He sustained a below-the-knee amputation to his left leg. The employee was wearing fall protection and was caught by his lanyard during the fall.",0
"An employee was operating a crane on the railroad tracks to pick up sticks of rail to place in a gondola hopper. As the employee was transferring sticks of rail into the hopper, the sticks struck a power pole and then struck the employee. The employee sustained a lacerated liver, crushed kidney, three broken ribs and three broken fingers.",1
An employee was standing in place and talking to guests while teaching a ski lesson when another skier struck the employee. The employee fell and experienced pain and inflammation of the discs in his back.,1
An employee was shot in the abdomen by an independent living resident.,1
"An employee was walking his electric pallet jack to the next location to pick cases when he tripped over a pallet next to him and fell backward over a yellow concrete divider. The vehicle then rolled over his left ankle and trapped his foot underneath, resulting in an ankle fracture.",1
An employee was turning off an oven when they tripped and fell. The employee sustained a femur fracture.,1
"An employee was using an electric pallet jack to unload product from a truck trailer at a dock. The employee fell off the pallet jack and their right foot was pinned against the dock plate and the pallet jack, resulting in a laceration to their right ankle.",1
An employee was using a manual jack to stock the grocery store when their foot was crushed by the jack. The employee was hospitalized with a fractured toe.,1
"An employee was removing a block of wood from a tail stretcher when the jaws closed on the employee's hand and crushed the palm, middle, ring, and little fingers.",1
An employee was stepping off a forklift when they sustained a right lower leg fracture.,1
"An employee was performing excavation activities when he was struck by the counterweight of an excavator, propelling him into the excavation. The employee landed on the boom of another machine, resulting in a fracture to his left hip that required hospitalization.",1
An employee was attempting to remove a rubber blanket from an energized fuse cutout on a utility pole when they experienced an electrical shock.,1
"An employee was on a ladder painting. The ladder collapsed beneath him, causing him to fall to the ground and suffer a broken ankle.",1
An employee was on a ladder checking for a pipe leak when they slipped and fell resulting in a leg fracture.,1
"An employee drove a pickup truck onto an alignment rack. He then got out of the truck and was setting the wheel chocks when the truck started to roll backward. The employee attempted to jump inside the truck to stop it when he fell and the truck ran over him, resulting in fractures to both legs, including one ankle.",1
An employee fell from a ladder while taking something from a storage shelf. She suffered a broken knee.,1
"On April 10, 2023, an employee was moving fluid from one end of the pit to the other. To perform this task, a metal grating hatch had to be opened. While standing up, the metal grating hatch closed, amputating the employee's left index and middle fingertips.",0
"An employee was stepping down from a trailer after performing a check when his left ring finger was caught by the trailer door, resulting in an amputation to the first joint.",0
"An employee was unjamming a slip sheet conveyor when the machine actuated, catching and amputating the employee's left index fingertip.",0
"On April 10, 2023, an employee was operating a ride-on pallet jack when the vehicle struck a forklift. The employee sustained a left tibia and fibula fracture.",1
An employee was performing maintenance to remove a hose connection when they slipped and fell backward. His left leg struck a bracket and the employee sustained a ligament tear in their left calf that required hospitalization.,1
"An employee was performing preventative maintenance on a forklift when he tripped backward over the forks, resulting in broken ribs and a punctured left lung. The employee was hospitalized.",1
"An employee was hanging a photo when they fell from the ladder to the floor, resulting in contusions to the head and ribs.",1
"An employee was closing a gate when the wind forced the gate back into them, throwing them backward onto the ground and resulting in a fractured hip.",1
"On April 10, 2023, an employee was operating a powered industrial truck to handle material in the warehouse when they were pinned between the vehicle and a building column. The employee sustained a pelvis fracture.",1
"An employee was operating an order picker. After lining up with a rack to pull items, the lift lurched backward and the employee's left thumb was crushed between the rack and the vehicle. They sustained a partial amputation to the thumb above the first knuckle.",1
"An employee was working on a vehicle line when he began feeling dizzy and fell to the floor, sustaining a head laceration.",1
"On April 10, 2023, at approximately 8:35 a.m., an employee was unjamming a packer machine when her left middle fingertip was pinched by a denester plate, resulting in amputation.",0
"An employee was fueling a chop saw in preparation to cut rebar. After placing the saw in a horizontal position, the gas cap leaked fuel onto the employee's leg. The sparks from cutting then ignited the fuel, causing the employee to sustain burns to the left leg and hands.",1
An employee was loading a ladder on top of a work van when she jumped or slipped off the bumper of the van and sustained a knee fracture and/or tibia fracture.,1
"An employee was using runners to move packs of glass from a truck when one pack fell off the runners and struck the employee's lower body and knocked him to the floor. The employee sustained five fractured ribs, internal injuries, and a lower leg laceration. The employee was hospitalized and required surgery.",1
"An employee was using an auger to spread lime to treat soil. The employee started warm-up operations for the equipment and went to lubricate the grease point located at the rear of the cart. The employee's glove became entangled in the moving chain, causing his right middle finger to become pinched between the chain and the sprocket. The employee sustained a partial traumatic transphalangeal amputation of the right middle finger.",0
An employee was operating a powered industrial truck around a corner when the vehicle struck racking. The employee sustained a left wrist fracture.,1
"On April 10, 2023, at 9:30 a.m., an employee was carrying rope strapping in their left hand while operating a forklift. While the lift was moving, the strapping fell out of the compartment to the floor. It then wound around the forklift's wheel and pulled the employee's left hand and fingers from the steering wheel. The employee sustained a laceration to his middle finger that required hospitalization.",1
An employee was removing soft insulation from a valve when the adjacent ball valve opened. The employee was sprayed with hot liquor and burned.,1
"An employee was working on a scaffolding platform. While climbing the ladder attached to the scaffold system, the employee lost his grip on the ladder rung and fell backward onto the ground.",1
An employee was climbing into a semi-truck when he lost his footing and slipped. His left side struck the fuel tank and he sustained rib fractures.,1
An employee was working from a scaffold that was approximately 8 feet high when he fell to the ground and sustained rib fractures and a vertebra fracture.,1
An employee was installing new teeth on a 15-inch blade on an edger machine when the machine was turned on and amputated their left foot above the ankle.,1
"An employee was working at the registers when they tripped over an anti-fatigue mat and fell to the floor, resulting in a hip fracture.",1
An employee was cleaning glue off of a jammed edge bander when their hand slid off and impacted the rotating trimming blade. The employee sustained avulsions to the left ring and middle fingers that required medical amputation.,1
An employee was pouring bags of an acid into a vessel when a static discharge occurred. Flammable vapors in the tank ignited and flames came out of the top of the tank. The employee sustained second-degree burns to their hands and wrists.,1
"On April 10, 2023, at 12:00 PM, an employee was using a broom to clear rock from a building's foundation in preparation for a spray-on vapor barrier. There was a 4-foot deep trench next to the building where the employee was working and the soil at the trench's edge fell away. The employee fell into the trench and was hospitalized for a left pelvis and/or femur fracture.",1
"An employee was maneuvering an electric pallet jack into a walk-in cooler. When he lowered the forks on the pallet jack, his left foot was crushed beneath it, resulting in multiple fractures.",1
An employee was helping an installer move a safe when it fell off the pallet jack and onto his legs. The employee sustained a crush injury to one leg and a fracture to the other leg.,1
An employee was preparing a job area for an air conditioning replacement when they ingested drain solvent.,1
An employee was unrolling a 3-inch poly line when it sprung loose and struck the employee in the face causing facial fractures.,1
An employee was inspecting a conveyor chain and sprocket. The employee went to turn the motor off when the chain caught his rag and pulled his finger into the nip point between the chain and sprocket. The employee sustained a left index fingertip amputation.,1
"Employees were working to remove and repair the shaft of an ACC unit. Power to the unit had been turned off but the wind caught the fan blades and the shaft was turning. The injured employee placed a nylon strap around the shaft to stop the rotation. His arm got caught in the strap and was pulled into a pinch point, resulting in a right forearm fracture that required hospitalization and surgery.",1
An employee tripped upon stepping over a metal guard while picking up wires in a service truck.,1
An employee was removing resin from a plastic mold extruder machine when hot resin burned his face.,1
"An employee was moving grating on a skid to set in a pipe. As he pulled the grating, his right middle finger was caught between the grating and angle iron that had been welded to the skid. The employee sustained an amputation to the right middle finger without bone loss.",0
"An employee had just finished her shift and was walking to her car in the parking lot when she stepped in a pothole and fell, breaking a hip.",1
An employee was drilling into the gas tank of a vehicle that he was servicing when the sparks caused a fire. The employee sustained second-and-third-degree burns to their lower left arm and first-degree burns to the back of their neck.,1
"An employee was removing a piece of stainless steel that was stuck in a baler. His left arm was caught in the compactor, resulting in a broken left middle finger.",1
An employee was dismounting a tire from a wheel when his right hand was caught in the pinch point of the tire machine and crushed. The employee sustained a fracture and laceration to the right middle finger.,1
"On April 11, 2023, an employee was operating a reach truck in the warehouse. As he dismounted the vehicle, his arm became caught in the handle and activated the throttle and the vehicle struck the employee's left leg.",1
"An employee was stepping out of or into a vehicle when their foot became stuck between the curb and the vehicle, causing the employee to fall and sustain an ankle fracture.",1
"On April 11, 2023, at 3:20 PM, an employee was standing inside of the building at the receiving bay waiting for a farm tractor to arrive. While approaching the receiving bay, the tractor collided with the building and struck the injured employee in the process. The employee was caught between the back wall and the front bucket of the tractor, resulting in rib fractures as well as head lacerations and contusions and were hospitalized.",1
"Employees had been reinstalling windows into the exterior wall of a building, which involved sliding the windows into the framework of the building and screwing them in place. An employee was on the first or second floor when the ceiling above collapsed onto him. He sustained fractures to a shoulder, vertebrae, ribs, both legs, and also sustained a bruise. The employee was hospitalized and required surgery.",1
An employee was at the pump area pumping salt water to the well when the chain broke and struck the employee. The employee sustained a right femur fracture and broken pelvis.,1
An employee was on the third floor of a building while talking to a supervisor. The floor separated and collapsed and the employee fell down onto the first floor.,1
"An employee attached a sling to a bridge crane and then to the forks of a forklift. The employee then used the forklift to lift a steel beam rigged to the bridge crane. The beam shifted and fell on the employee's left foot, resulting in a laceration to their big toe that resulted in an amputation.",0
"An employee was putting up a tent for an outdoor event. As the employee was inserting the steel bar into the vinyl pocket, a gust of wind caused the panel to flap and the steel bar to come loose. The bar then impacted and caught the employee's right index finger between it and the aluminum frame of the tent. His right index finger was partially amputated.",1
An employee was struck by forklift that was backing up resulting in a lower leg crush injury that required amputation midway between the knee and the ankle.,1
"An employee was moving a go-kart that had stopped on the track when they tripped over the barrier and fell, resulting in a right femur fracture.",1
"An employee was working on a fertilizer applicator toolbar in a farmer's field. As he went to tighten it, it broke, causing anhydrous ammonia (NH3) to release onto the employee's waist and forearm. The employee sustained chemical burns to his chest and abdomen.",1
"An employee was walking down a set of steps when he lost his balance, resulting in a leg fracture.",1
"On April 11, 2023, at approximately 6:00 p.m., an employee was filling a tank with anhydrous ammonia when it splashed onto their chest and neck causing chemical burns.",1
An employee was changing a bolt in the concrete mixer when the paddles moved. The employee sustained a right hand fracture.,1
"An employee was diagnosing a problem with the under carriage of a vehicle and tracing a leak. The airline came out of a fitting at the rear of the vehicle and quickly released pressure, causing the tag axle to fall or come down onto the employee's chest. The employee sustained a crush injury to the chest.",1
An employee was moving boxes behind a packing station when he walked into a U-boat cart. The cart struck and injured his abdomen.,1
"An employee was delivering coffee products and unloading a hand truck in a trailer. While exiting the trailer, he lost his footing and fell from the ramp to the ground, resulting in a right knee injury.",1
"An employee was unloading telephone poles for horizontal storage when a pole slipped off a stack and rolled onto the employee, knocking him to the ground and pinning his leg. The employee sustained a crushing injury to the foot area.",1
"An employee was installing heating, ventilation, and air conditioning (HVAC) equipment when their finger was caught between the new air duct equipment and a scissor lift. The employee's right little finger sustained a laceration.",1
An employee was pressure washing when the wand of the machine slipped out of his hand and the starter rope lacerated the tendons and muscles in his arm. The employee was hospitalized.,1
A temporary employee was inspecting an electrical outlet behind drywall that was leaning against the wall. The drywall fell on top of the employee and he was hospitalized for a hip dislocation.,1
"On April 11, 2023, at 10:30 AM, an employee was climbing down an A-frame ladder when the ladder became unstable and fell. The employee impacted the floor and sustained a head injury that required hospitalization.",1
An employee was cleaning a manhole when the cover fell on the employee's fingertip as it was put back in place. The employee sustained an amputation.,1
An employee was on a ladder fixing the bottom of chicken cages when he fell 6 feet off the ladder to the basement floor. The employee sustained a hip fracture that required surgery.,1
"Two employees were using an overhead crane to set a flange onto a pallet. They set the flange on 2x4 pieces of wood so they could get the hooks out from the flange. The employees then used a magnet to pick up the edge of the flange to remove the 2x4's from underneath. The magnet came loose and came down on the injured employee's left little finger, amputating the fingertip.",0
"Two employees were collecting garbage and stopped in a parking area to collect waste from a business location. The garbage truck began to move forward while the injured employee was in front of it, pinning the employee against another vehicle. The employee sustained fractures to the pelvis and femur.",1
An employee was planting flowers in a garden bed when they were bitten by a cottonmouth snake.,1
"An employee was helping to install a new liner in a swimming pool. The employee entered the pool and stepped into a small uneven surface under the liner. The employee's right ankle twisted outward, resulting in a sprained ligament and a nondisplaced fracture to the right ankle.",1
An employee was pulling wire to install on a pole when their thumb was caught on a block. The employee was hospitalized for a right thumb fracture.,1
"An employee was operating a pallet jack when they were pinned between two steel cages, resulting in fractured ribs, blood in the lungs, and a bruised right hand.",1
A crew was removing bolts from the pump's spool piece and rigging the hoist to hold the elevated spool piece out. The crew replaced the witch's hat inside the pump and began to reinstall the spool piece when a burst of fire came out of the pipe and struck the injured employee's face and hand resulting in burns.,1
An employee grabbed a box to place on a forklift to bring it down from the second floor storage area when they fell through a roll-up door opening on the second floor. The employee sustained fractures to the right femur and left ankle.,1
An employee was moving boxes when he felt a sharp pain in his abdomen. The employee sustained a hernia.,1
"An employee was approximately 16 feet above ground level connecting steel beams for a two-story commercial structure. While transitioning from one side of the steel beam to the other, the employee fell and sustained a liver laceration, rib fractures, and a wrist fracture. They were hospitalized.",1
"An employee was completing a pick-up/delivery and was closing the sliding van door. The door became stuck halfway and as the employee went to close it again, his hand slipped off the handle and became caught in the door. He sustained a left middle fingertip amputation.",0
An employee was working with an actuator in a valve for a glue system. The pneumatic three-way valve activated while the employee was checking the orientation of the ball valve. The employee's left index finger was amputated to the first knuckle.,0
An employee was lowering an electric ladder. They stepped off the ladder platform and fell 3 feet to the ground. The employee sustained a hip fracture.,1
An employee was removing a chain link fence when a guide wire tip struck and lacerated their left eyelid. The employee was hospitalized and required surgery.,1
"An employee was working as an umpire near second base at a baseball game when they were struck in the head by a baseball thrown from the outfield. The employee sustained a subarachnoid hemorrhage, displaced temporal bone, and nondisplaced fracture of the left zygomatic bone.",1
"An employee was tightening a bolt on the final assembly of a stump puller. The wheels were separated and resting on 6-inch steel blocks with the mainframe on steel I-beams. The employee stepped between the wheels to adjust the spacer plates and used his legs to separate the wheels. When the stump puller was raised slightly and the weight came off the support beams and blocks, it rolled backward a few inches, causing the lifting wheels to close and catch his left leg between the wheels. The employee sustained a left tibia fracture, a torn calf, and bruising to the lower extremities.",1
"An employee received a call to address the condition of a laser machine. While diagnosing the issue, he saw there was debris that caused the chain to become misaligned. He began realigning the chain when his right ring and little fingers were pinched between the chain and sprocket and amputated.",0
"An employee was dislodging a piece of foam board from between the production line cage and the conveyor belt. Once the piece was unstuck, it fell into the production line, struck the rotor, and then shot back up. His thumb was then wedged between the plastic and the conveyor, resulting in a partial medical amputation.",1
"An employee was setting up their workstation and aligning parts to be shotblasted. While the employee was moving a hose, a 12-by-8-inch pipe fitting became unstable and fell, striking the employee's leg above the knee. The employee was sitting in a chair and they sustained a femur fracture.",1
"An employee was using a mop to clean chili that had spilled on the kitchen floor when he slipped on chili residue and fell, resulting in a left knee fracture.",1
"An employee was separating laundry and crossed over the conveyor belt to get to the other side of the room. As she was stepping off the conveyor belt, she heard a pop in her leg. She sustained a left tibia fracture.",1
"An employee was performing preventative maintenance on a trolley return chain when he was caught in it, resulting in an amputation to his lower left arm below the elbow.",0
"An employee was operating a concrete pump when it slipped off the support base and struck the employee in the left leg, resulting in a fracture.",1
"An employee was closing a gate when the wind slammed the gate closed on the their left little finger, resulting in a fingertip amputation.",1
"An employee was making parts on a 300-ton press when the shot key of the machine dislodged and struck the employee in the stomach, resulting in a possible liver laceration.",1
"An employee was helping another employee pick up a round piece of metal to recoup a skid. The metal slipped and lacerated the employee's right middle finger, resulting in a fingertip amputation.",0
An employee had made adjustments inside a wood moulder and was operating the machine when they sustained a left ring fingertip amputation as well as a laceration to the middle finger.,0
An employee was switching the attachment on a pay loader from a bucket to forks. The employee was adjusting the fork width when the fork attachment pinched their right middle finger and fractured it.,1
"An employee was performing maintenance on an overhead bunker door on a recycling system. The door has an electric hoist that moves up and down. When the employee went to remove the tin can that was blocking the door, the door slid down 2-3 inches with the employee's hand on the chain and hook. The employee sustained a right little finger amputation.",1
"An employee was getting out of the car when the strap on his bag broke. As he reached to grab his laptop, his walker moved, and the employee slipped and fell. The employee underwent hip surgery.",1
An employee was spotting for materials that were being raised to a platform. The employee was moving a box out of the way on the platform when they fell 12 feet to the concrete below. They sustained contusions and rib fractures.,1
"An employee was walking through a work cell to get to another location while carrying an object with several unattached, small pieces placed on top. Some of the pieces fell from the pile. The employee slipped on a piece and fell, resulting in a right hip fracture.",1
"On April 12, 2023, an employee was operating a saw to cut dimensional lumber when they contacted the saw blade, resulting in a partial amputation to the left index finger. The machine was unguarded at the time.",0
Two employees were adjusting a wire spool on the forks of a forklift when the spool shifted and pinned the injured employee's right hand. They sustained a right index finger amputation and a right thumb fracture.,1
"On April 12, 2023, an employee was pulling a stack of metal connecting sheets off the forks of a skid steer and stacking them on a trailer. After pulling a stack of 6-7 sheets off, the sheets shifted and the metal edge went into the employee's left middle finger, resulting in an amputation above the top knuckle.",0
"Employees were rolling a large metal part on a rolling machine. While the injured employee was positioning the part, their left hand was pinched in the machine, resulting in hand fractures and lacerations that required surgery.",1
An employee was guiding a pipe onto internal pipe clamps when their left hand was caught between two pieces of metal. They sustained crush injuries to the left ring and middle fingers resulting in amputation.,0
An employee was using a miter saw to clip corners from the deck board for pallet material and amputated their right little finger.,0
"An employee was closing up their trailer before going to their next job. The employee's fingers were inside the loading bar area when the sliding metal ramps struck his fingers, resulting in amputations of both middle fingertips.",0
"On April 12, 2023, at 12:30 PM, an employee was cutting a wood block on a table saw. A piece of the block fell into the saw and pulled the employee's left index finger in with it, resulting in a fingertip amputation.",0
"An employee was walking across the barge when they stepped across a barge gunnel lid that was hidden due to coal spillage. The lid came up and struck the employee, resulting in abdominal bruising.",1
"An employee was participating in a training activity that involved operating a center rider double jack to select grocery products for distribution. The employee fell off the vehicle and was struck by the double jack, resulting in left and right leg fractures.",1
"An employee was standing on a ladder drilling into a wooden 2x4 when the wood broke, causing him to lose balance and fall off the ladder striking his head on the concrete below. The employee sustained a concussion and skull fracture.",1
"An employee was driving an electric pallet jack to pick an order in an aisle of the facility when the pallet jack struck the leg of a rack. The employee's left thumb became pinched between the pallet jack and the rack, resulting in a deep laceration.",1
"An employee was walking on stilts while finishing drywall on a ceiling. The employee fell to the floor, possibly after tripping on an extension cord, and suffered a back injury.",1
"An employee fell approximately 12 feet from a roof to the ground, resulting in fractures of the wrist, elbow, and nose.",1
"An employee was doing repair work in an apartment bathroom. While he was on a ladder scraping paint, he lost his balance and fell off the ladder. The employee struck the toilet, resulting in rib fractures and a punctured spleen and kidney. He was hospitalized.",1
"An employee was on his route delivering mail when he fell to the ground and struck his head, resulting in a head injury.",1
An employee was on a ladder placing steel wool into the exterior of a building when they fell approximately 8 feet from the ladder to the ground. The employee sustained a left ankle and tibia fracture.,1
"An employee had just finished delivering a package when they stopped to help an individual. The employee was then attacked by a dog, resulting in bites on her right forearm.",1
"An employee was conducting fire watch activities when their right index finger was caught in a pinch point, resulting in an amputation.",0
"An employee was standing on the rig, spooling the line, when the tubing line got caught around both ankles. The unit engaged and he sustained a left ankle fracture and right ankle sprain.",1
An employee was cooking food in a pan when the pan was dropped into the fryer. The hot grease splashed and burned the employee.,1
"An employee was moving a 110-pound bearing housing with a co-worker when the injured employee tripped over a rubber mat. The bearing then fell on his hand, resulting in a crush injury and amputation.",0
An employee was adjusting the door on a baler using a crane when his finger was caught between the paper dog and the interior of the door as he lowered it into place. The employee sustained an amputation to the left middle finger from the tip to the knuckle.,0
"An employee was opening a 10-foot long, sliding metal gate when their right middle finger was caught between the moving gate and the latch, resulting in a fingertip amputation.",0
"An employee was standing between two machines while extending the screed on a spray paver. Upon flipping the control switch to stop the screed extension, the switch failed to stop the extension and the employee was pinned between the screed and an asphalt distributor tire. The employee's ability to breathe was blocked and he sustained a fractured hip.",1
"An employee was exiting the bakery freezer and shutting the door when it closed on her right hand, resulting in a partial right index finger amputation.",0
An employee was replacing a roll of bags on a machine when the grip clamp closed on his fingertip and amputated it.,0
"An employee was setting up a personal fall arrest system on a metal roof. They slipped, slid down the roof  and fell to the ground, resulting in a broken right wrist and fractured right elbow.",1
"On April 13, 2023, an employee was unjamming a laminator machine when he sustained a left index fingertip amputation. The machine was guarded at the time.",0
"An employee was changing fryer oil when the oil spilled on them, causing burns.",1
"A crew was using a seamer to install roof panels on a new building. As the employee was placing the seamer on a platform at the edge of the roof, the employee stepped onto the platform. The platform and the employee then fell approximately 23 feet to the ground. The employee sustained a lower back injury.",1
"An employee was using a gantry crane to move a copper cylinder across a room. As the employee went to stop the cylinder from swaying, the cylinder shifted on its holder and the employee's left little fingertip was crushed between the metal cylinder and the support at the bottom, resulting in a fingertip amputation.",0
"On April 13, 2023, an employee was operating a high lift loader to push up rock. While pushing the rock next to a retaining wall, the retaining wall failed and fell. The employee, still inside the cab of the loader, fell with the retaining wall and sustained bruised/fractured ribs, finger fractures, and a brain contusion.",1
"An employee was moving a 1,100-pound staircase that was rigged with an electric hoist with a cable and hook with a safety clasp. The safety clasp failed, causing the staircase to fall and strike the employee in the head and torso. The employee was knocked to the ground and sustained head injuries, fractured ribs, and internal injuries.",1
"An employee was exiting their stand up forklift. As they stepped down from the vehicle, the control handle was engaged, causing the lift to move forward. The employee's left foot was then pinned between the angle iron that protects the battery stand and the forklift. They were hospitalized for multiple fractures and lacerations to the left foot and lower leg that required surgery.",1
"An employee was removing steel grating from warehouse racking when he fell approximately 18 feet through an opening near a piece of unsecured steel grating to the ground. The steel grating struck him during the fall, resulting in head and lumbar fractures. The employee's fall protection was tied off to the steel grating.",1
"An employee fell to the ground after climbing a cross brace, resulting in a left ankle injury.",1
"An employee was training on a pallet jack when the vehicle collided with a forklift, resulting in a left heel fracture.",1
"Employees were erecting structural steel. The injured employee was sitting on a 12"" wide horizontal member and lining up an I-beam brace as it was suspended by an overhead crane. He leaned left to push the end of the brace. The end of the suspended brace swung away from him, causing him to lose balance and fall 8 feet. His personal fall arrest system arrested his fall, but he swung into a piece of duct work during the fall that resulted in a concussion.",1
"An employee was operating an excavator with a hammer attachment. As the employee began hammering the pot and creating a hole in the slag crust, the slag hit the water and hot material was projected towards the equipment. The employee sustained second and third-degree burns to 10.5% of their body.",1
"An employee was driving a four-wheeler behind cattle in order to direct them to a pen. The cattle spooked and struck the vehicle, turning it over and causing the employee to fall off. The employee struck a fence and suffered two broken ribs. The employee was hospitalized.",1
"An employee was struck in the heel/ankle by a lift truck that was backing up, resulting in two bone fractures and soft tissue damage.",1
"An employee was using a 140-quart mixer to mix dough. While the employee was checking the texture of the dough, the dough hook caught the employee's left arm and pinned it against the bowl. The employee was hospitalized and underwent surgery.",1
An employee was using a push mower to cut the grass. The employee picked the mower up to move it and sustained a right middle fingertip amputation.,0
An employee was taking parts to the delivery vehicle and lost his footing as he was walking out the door. He fell and sustained a shoulder and hip fracture as well as a laceration above his eye. The employee was hospitalized.,1
"An employee was moving steel tubing through the machine for bending. As the employee went to remove a piece of tubing, the machine clamped down onto their right hand, resulting in a right thumb amputation.",1
"On April 14, 2023, an employee was cleaning an edge-banding machine when the machine cycled, resulting in amputations to the left index, middle, and ring fingers.",0
"An employee was standing near an excavator that was relocating a 4-inch plastic pipe using a sling connected to a bucket. The equipment was moving slowly down an incline when it started to slide. The boom was lowered and the excavator struck the pipe, causing the pipe to swing and strike the employee's left leg fracturing it.",1
An employee had just stopped a forklift and dismounted it when another forklift struck him as it was backing up. He suffered a laceration to a muscle in his left leg and was hospitalized.,1
"An employee was touching up paint along the gable and main floor roofline at a home. When the employee finished painting, he set up a 16-foot extension ladder to reach the upper roofline in order to detach his lifeline. As he stepped off the ladder at the upper roofline, the ladder slipped out from beneath him, causing the employee to fall approximately 15 feet to the driveway below. He sustained a hairline fracture to his left shoulder, a fractured left cheekbone, and a laceration to the back of his head and below his left eye. The employee was hospitalized.",1
"A waste truck was arriving to dump a container. As the truck was stopping, the truck gate opened unexpectedly, striking a nearby employee and knocking him to the ground. The employee sustained an injury and sprain to the right side and right knee.",1
An employee was exiting a semi-tractor. The handle on the door gave way while the employee was holding onto it. The employee fell to the ground and suffered fractures to the right leg and ankle.,1
"An employee was on the first floor cutting a 2x10 in the landing when the saw he was using got stuck. While pulling the saw out, the ladder slipped and the worker fell 5-6 feet to the floor, resulting in a leg fracture.",1
"On April 14, 2023, at 10:30 p.m., a temporary employee's right index finger got caught under a heavy pallet that was on the forks of a forklift, resulting in an amputation.",1
"An employee was exercising in the gymnasium when weight bands became loose, fell, and struck the employee in the face, resulting in facial injuries and a concussion. The employee was hospitalized.",1
An employee was gathering tools from the work truck when they tripped on uneven pavement in the parking lot and fell. The employee sustained a leg fracture.,1
"An employee was climbing down from a warehouse racking system. The employee stepped on a shelf that slipped, which caused the employee to fall and hit their head on the concrete floor.",1
"On April 14, 2023, four employees were working at the company yard removing 50-foot, 3,000-pound signal poles. One employee was using a forklift to remove signal poles from the trailer when a pole fell off the forklift and landed on an employee that was working on the ground. The injured employee was hospitalized for bilateral leg fractures and a dislocated shoulder and required surgery.",1
"An employee was working in the smoked meats department operating a machine that clips and holds the ham before smoking. A tote used to catch bindery emulsion from the machine was full and moved out from under the workstation. The employee later tripped over the tote and fell to the floor, sustaining a left femur fracture that required hospitalization and surgery.",1
"An employee was air-chiseling a bearing in the maintenance shop when a metal fragment went into his right eye, resulting in hospitalization.",1
An employee was using a bandsaw to cut pig feet. The saw amputated the tip of his thumb and part of the nail.,0
"An employee was pushing a cart when it collided with another employee's cart, resulting in a partial finger amputation.",1
"An employee was removing a manhole cover when the cover slipped and fell on his hand, resulting in a partial amputation to his left middle finger.",0
An employee was adjusting a stacking stick on a sander strapper when their arm was caught between the load and strapper platen. The employee sustained a left wrist fracture that required hospitalization.,1
An employee was hooking an air hose to the front of a semi-trailer when the truck moved forward onto her left foot and leg. The employee sustained a lower left leg and foot fracture.,1
An employee was securing a sling chain to a bundle of material on the saw conveyor when their left index finger became pinched between the material and the saw conveyor roller resulting in a fingertip amputation.,0
An employee was walking out the door and closed the door on her right hand. The employee sustained an amputation to the right middle fingertip.,0
"An employee was taking a discharge hose off a barge. When he went to throw the hose onto the dock, it caught his glove and pulled him with it. He fell about 5 feet off the barge, suffering a broken collarbone and rib.",1
"Two employees were clearing a blockage in the auger screw conveyor. Once the blockage was cleared, the machine was powered on and partially amputated the injured employee's middle finger.",1
An employee was performing housekeeping tasks around the dough divider machine when their finger was caught between the dough feeder and the cutter device resulting in a left middle fingertip amputation.,0
An employee was verifying a loose belt on a belt convention pulley and sustained an amputation to their right ring and little fingers.,1
"An employee tripped on a table cloth in a kitchen, fell to the floor, and suffered a broken left hip.",1
"An employee was holding the bottom of a metal stringer (about 25 feet long and 6 inches wide, made of thin-gauge stainless steel) while others were tack welding it to a tank wall. The tack welds gave way. The stringer dropped about 4 inches and pinched the employee's right index fingertip against the support tooling. The fingertip was amputated without bone loss.",0
"An employee was walking along the side of a finished portion of the roof when he fell approximately 15 feet to the concrete surface below. The employee sustained a laceration on the left side of his head, requiring hospitalization.",1
An employee was on the sidewalk clearing brick column fences when the mortar of the bricks came apart. The top half of the column then fell on his left leg and fractured his femur. The employee was hospitalized.,1
An employee was feeding metal into a roller machine when their fingers were pulled into the machine. The employee sustained a partial amputation of the ring finger and an amputation of the middle fingertip.,0
"An employee was cutting pig tails on the band saw when the product slipped. The employee's right thumb contacted the rotating band saw blade, resulting in a partial amputation.",0
"An employee was operating a stand-up reach truck when the vehicle struck a pallet on the floor, causing the employee to be ejected and strike racking. The employee sustained internal injuries and a possible liver laceration.",1
An employee was assisting with latching the elevators around the drill pipe when their right thumb was pinched between the elevator horn and the drill pipe and amputated.,0
An employee was putting a sheet tray on a counter when another employee attacked him with a knife from behind. The employee sustained stab wounds to the back.,1
"An employee was assaulted by four individuals that entered the workplace, resulting in fractures and a concussion that rendered him unconscious.",1
"On April 16, 2023, an employee was testing a sample of fuel oil at the laboratory. During sample handling, the exposed employee was shaking the can of liquid when the top cap of the can fell off. Fuel oil splashed onto his face, resulting in superficial burns to the nose that required hospitalization.",1
An employee had just arrived at work and was walking into the dressing room to put on their surgical uniform when they slipped and fell. The employee was hospitalized for a tibia and fibula fracture that required surgery.,1
An employee was helping to lower a tailgate on a dump truck. His right little finger was caught between the tailgate and a safety chain and fractured.,1
An employee was coming back from their break when they tripped over a yellow-painted stop/lip. The employee was hospitalized for multiple facial lacerations.,1
"On April 16, 2023, a maintenance employee was clearing a jammed classifier machine and went to remove the air lock when it amputated three middle fingers on his left hand at the first joint.",0
"An employee was taking a molding frame from a shower base in preparation to be trimmed on the band saw. Another 42-pound shower/tub leaning on a rack to the right of him fell on his head, rendering the employee unconscious.",1
"An employee was using a riding mower to mow grass across from a company location. While mowing around a storm drainage ditch and culvert, the mower went off the culvert and the employee was thrown from the mower. The employee sustained transverse fractures of the L1, L2, and L3 vertebrae and was hospitalized.",1
"Employees finished clearing a jam in an auger and began descending the ladder when one employee fell off the ladder to the ground below. He sustained fractures to the eye socket and ribs, requiring hospitalization.",1
"An employee was throwing waste into an open dumpster located at a loading dock that was approximately 2 feet above ground. While putting a metal shipping bracket into the dumpster, the employee lost his balance and fell off the dock and onto the ground next to the dumpster, resulting in a fractured hip.",1
"An employee was cleaning a gutter fabrication machine when their finger was caught between the rollers. As the employee pulled his hand from the machine, his left middle fingertip was amputated.",1
"An employee was standing a coil from a skid and placing it on an un-coiler using a hoist rigged with a mesh sling. The coil shifted and the employee attempted to stop the coil from shifting with his left hand while his right hand was on the hoist pendant controls to raise the coil to the vertical position. The employee's left middle finger was then pinched between the coil and the mesh sling, resulting in amputation of the finger pad.",0
An employee was operating a pallet jack and turned to pull out of the parking area when the vehicle struck a parked forklift. The employee collapsed after stepping off the vehicle and sustained a left femur fracture.,1
"An employee was filling asphalt buckets. When he went to pick them up, they were stuck together and hot asphalt spilled onto his arms, burning them.",1
"On April 17, 2023, an employee was operating a lift assist for a front module on an electric delivery van. The control handle rotated and struck the employee's left ring finger, causing an open non-displaced fracture and an amputation.",0
An employee was attempting to brace a wall when he fell off a ladder and fractured his right leg.,1
An employee was working at a job site when something flew into his eye. He was hospitalized with a cut on his cornea.,1
An employee was investigating a leak in a clean-in-place system. The system sent cleaning solution to a valve that was not connected and the employee was sprayed with the hot water and caustic soda mixture. The employee sustained first and second-degree burns to the abdomen.,1
"An employee was moving trim from a crate on a flatbed truck, about to put it on top of a steel pack on the forks of a truck-mounted forklift. He fell from the bed of the truck to the ground, suffering eight broken ribs, two broken vertebrae, and a broken collarbone. He was hospitalized.",1
"An employee was loading windows into a trailer when the windows began to fall. As the employee went to stop the windows from falling with his right hand, he sustained a right wrist fracture that required hospitalization.",1
"An employee was hanging drywall from a scaffold when he fell to the ground, resulting in bilateral wrist fractures and a forehead injury.",1
"An employee entered a portable structure that was being rigged up to a crane. The crane began lifting the portable structure with the employee inside when the structure fell 15-30 feet to the ground. The employee sustained a left leg fracture, a dislocated right ankle, and back injury.",1
"An employee was sampling vacuum tower bottoms when one unplugged and fell on the employee's left hand, resulting in burns to the left hand.",1
"Two employees were using a pry bar to move a wheel on a machine. The pry bar pinned one employee's right ring fingertip against a door, causing the employee to lose tissue on the fingertip. The employee then underwent a medical amputation of the fingertip.",0
"An employee was dejointing a carcass head when another employee's air-driven circular knife lacerated his left index finger, causing a partial amputation.",0
"An employee was clearing a jam on a machine when his right middle finger was pulled in by a running belt, resulting in the finger being crushed. The finger required surgery and was partially amputated. The machine was not guarded at the time of the incident.",0
"An employee lost balance while walking down stairs, fell to the floor, and suffered a broken ankle. The employee was hospitalized, requiring surgery.",1
An employee was walking out of a room when they fell backward. They were hospitalized with a wrist and back fracture.,1
"An employee was moving barrels to the left lane shoulder when they were struck by a car, resulting in a right leg fracture. The employee was hospitalized.",1
"An employee and a co-worker were operating a side puller machine when the clamps actuated and contacted the employee's left hand, resulting in amputations of the index, middle, and ring fingers.",1
"On April 17, 2023, an employee was walking in the powered industrial truck (PIT) parking area of the warehouse and tripped over the forks of an order picker. The employee fell to the ground and struck their forehead on the fork of another order picker, causing a laceration to the forehead and a fractured arm. The employee was hospitalized.",1
"An employee was getting out of a van when his foot snagged on a pedal, exacerbating a prior bulging disk in his lower back.",1
An employee was lining up 2-inch pieces of bar stock for clamping when their right index finger was caught between the bar stock. The employee sustained a degloving injury that resulted in medical amputation of the right index finger at the distal joint.,0
An employee was helping secure a support structure for a heat exchanger that was going to be cut. The support structure was cut and the heat exchanger put tension on the strap that was securing it. The strap then broke and the heat exchanger fell. It struck the employee causing a laceration to their left lower leg.,1
"An employee fell out of a semi-truck and landed on their back, striking their head on the ground. The employee sustained a head laceration.",1
"An employee was unloading trees from a flatbed semi-trailer. A tree branch hit him. He lost his balance near the edge of the trailer and fell to the ground, suffering a broken left tibia and fibula.",1
"An employee was setting up a work cell with a band saw for production. As he went to make an adjustment, the blade broke and a piece bounced off the floor and struck him in the abdomen, resulting in a laceration.",1
"On April 17, 2023, at 9:05 a.m., an employee and two co-workers were attempting to recover an 840-kilogram bag of technical powder that had tipped over when two of the same bags behind the employee tipped over. The top bag grazed the employee's back and the second bag hit their left ankle, resulting in an ankle fracture.",1
"An employee was getting up from a couch when the rug slipped out from under them, causing them to fall and dislocate their knee.",1
"An employee was fabricating rebar using the circle bender machine when his glove got caught in the machine, resulting in a right index fingertip amputation.",0
"An employee was clearing a clog from an auger. The auger caught the employee's right hand, pinched it, and caused the partial amputation of the thumb.",1
"An employee was installing trusses for a pole barn when he fell approximately 16 feet to the ground, resulting in fractures to his pelvis, hips, and back.",1
An employee was performing a maintenance task on a pipe when they were burned by hot steam.,1
An employee was removing mix from a mixer machine when their right ring and middle fingers were amputated.,0
"An employee was breaking down boxes when they stepped on a box and fell to the ground, resulting in a hip fracture.",1
"An employee was retrieving supplies from the bakery cooler when she tripped over an apron bin and fell, resulting in a left wrist fracture.",1
An employee was operating a 55-gallon drum mixing machine when his hoodie got caught in the auger pulling him into the machine. He was able to free himself as the belt broke on the auger. The employee then fell to the ground and had a seizure. The employee sustained contusions and two broken ribs.,1
"An employee was in the bed of a truck when they fell to the ground, resulting in a laceration and left arm fracture.",1
"An employee was attempting to reseal the leaking nozzle tip of a pressure washer when the pressurized water discharged into the palm of his left hand, lacerating it.",1
"An employee attempted to remove saw dust from a machine after completing an operation. While removing the saw dust, a blade in the machine contacted their right middle finger, resulting in a degloving injury and amputation. The machine was guarded at the time of the incident.",0
"An employee had just climbed on top of a ladder fire truck to change the aerial hydraulic return filter. He tripped on the base of the turntable and fell forward into a 55-gallon oil tank. As the employee went to catch himself, he fell eight feet to the concrete floor and landed on his right side. The employee sustained three broken ribs and sprained their knee and ankle.",1
"An employee had parked a backhoe and walked about 20 feet away from it toward his own vehicle. The backhoe slid downhill, and its bucket pinned the employee against his vehicle and broke his right knee.",1
An employee was performing maintenance on a mud pump when the piston engaged and his left hand was caught inside the pump. The employee sustained fractures and a crush injury to the left hand that required surgery.,1
"An employee was descending a ladder when they fell to the ground, resulting in broken ribs and a broken arm.",1
An employee sustained a back injury while lifting a child. The employee was hospitalized.,1
An employee was descending a 20-foot fixed ladder when they fell 10 feet to the concrete surface below. They sustained a pelvis and hip fracture that required hospitalization.,1
"An employee was observing a customer load a rental skid steer and mower deck. The customer laid the mower deck on top of a D-ring and lowered the mower deck. It crushed the employee's right middle finger, resulting in a partial amputation.",1
"A temporary employee was tacking end plates onto a railroad tie by hand. They reached over to the press that completes the attachment of the end plate after the rail tie crosses over a limit switch. The limit switch activated, resulting in a crush injury to the employee's left index and middle fingers that required medical amputation. The machine was guarded at the time.",0
"An employee was using a shear to cut metal. A piece of metal became caught, then moved again and crushed the employee's right middle finger against the machine's guard. The employee suffered an amputation to the finger.",0
An employee was removing clamps from parts that had been welded when a clamp fell onto the employee's left thumb. They sustained a partial amputation to the left thumb that required surgery to reattach.,1
"An employee was separating a valve stem from an actuator stem by removing two-piece split nuts that hold it together. The actuator shaft shifted, causing the top half of the split nut to impact and pinch the employee's right thumb against the frame. The employee was hospitalized.",1
An employee was hospitalized after a slip and fall.,1
"An employee was installing cable service to a private home. They were using a pole to run fiber line through trees when the pole contacted a power line, resulting in burns to his hands.",1
"An employee was dislodging a jammed lift gate on a shipping dock. As it became dislodged, the lift gate crushed his right index finger and amputated the tip.",0
An employee was assisting customers at the registers when a car came through the wall behind them. A large printer then struck the employee who sustained a spinal fracture.,1
"An employee was removing debris from a conveyor when his jacket sleeve was caught in the conveyor belt, causing the employee to sustain a right arm injury. The machine was not locked out/tagged out and was unguarded at the time.",1
"An employee was entering a mini trackhoe to get his inspection book. The vehicle was parked on a slight incline, requiring the employee to reach for the handle and enter the cab. He slipped and fell, landing on the push blade, and sustained 3 rib fractures and a punctured lung.",1
"An employee was standing on an 8-foot step ladder tightening a bolt on the auto-cropping machine in the evisceration department. The wrench the employee was using came loose, causing him to lose balance and fall 3-5 feet to the concrete floor below. The employee sustained fractures to the right radius and right ilium.",1
An employee was cleaning out gutter debris when they fell 10 feet off an A-frame ladder to the cement ground below. They sustained lacerations to the face as well as possible arm and jaw fractures.,1
An employee was found on the floor next to the film-roll pallet after falling. The employee sustained a tibia and fibula fracture that required surgery and hospitalization.,1
"An employee was removing a bolt from a caliber on a machine with one foot on the platform and the other foot on the piece of equipment. As he went to loosen the bolt, he lost his balance and fell four feet to the ground.",1
"An employee was in a mobile oil exchange trailer, climbing over an oil tank to adjust an oil hose reel. The tank valve opened, causing the pressurized tank fill cap to strike the employee in the face. The employee lost multiple teeth and suffered lacerations and fractures to the face.",1
"An employee was moving racks from the dock to the rack pile. The rack veered to the edge of the cement, causing it to begin tipping over. As the employee went to stop the rack from tipping, it landed on him, resulting in crush injuries to his hip, abdomen, chest, leg, and back.",1
"An employee was on a pitched roof removing shingles when they stepped/slipped on a tarp that was on top of a pool screen enclosure. The employee fell 20 feet to the pool deck below, sustaining head trauma, a facial fracture, and fractures to both arms and wrists. Fall protection equipment was worn at the time of the incident.",1
"An employee was routing a piece of wood with a handheld electric router. The employee's finger slipped into the tool, resulting in a fingertip amputation.",0
An employee was struck by a vehicle that entered a construction zone. The employee suffered multiple broken bones and was hospitalized.,1
"At 10:00 a.m. on April 18, 2023, an employee was changing the bit of a battery-operated drill when the drill activated. The drill bit flew into his protective eyewear and bruised his eye. He was hospitalized.",1
An employee was working in the packaging room and noticed there was plastic film going through the forming area that was folded incorrectly. The employee went to correct the plastic film when his right index finger was crushed in the machine.,1
"An employee was assisting in the transport of a pump from one section of the warehouse to another. One of the straps that was holding the pump shifted, causing it to fall on the floor. The employee reached to catch the pump when his right little finger was caught between the pump and the floor, resulting in a fingertip amputation.",0
An employee had mounted a tire on a rim and was inflating it. The tire came over the rim flange and struck his leg. The employee sustained a leg fracture that required hospitalization and surgery.,1
"An employee was descending a ladder that was attached midspan between two utility poles. The ladder shifted and the left hook came loose, causing the employee to be thrown 6 to 8 feet to the ground. The employee sustained rib fractures, a shoulder injury, and a head injury that caused a loss of consciousness.",1
An employee was using a die grinder to cut off a mount under the passenger side of a van. The grinding wheel broke and struck his face. He suffered lacerations to both lips and two broken teeth.,1
An employee contacted an electrical wire while on a metal ladder. The employee was hospitalized.,1
An employee was cutting meat using a band saw when he sustained an amputation to his left little finger.,1
An employee was setting up a depositor and removed the spatula when his right middle finger was partially amputated by the machine.,1
An employee was moving a pole when it shifted and pinned his leg resulting in a tibia/fibula fracture.,1
"On April 19, 2023, an employee was assembling a hose and performing a pull test. During the pull test, the employee's left index fingertip was amputated by the longitudinal pull tester.",0
"An employee was on a manlift putting down plywood forms. The plywood struck the cage and caught the employee's left middle and ring fingers between the manlift and plywood, resulting in partial amputations.",1
An employee was installing/stringing film around a packaging machine's former when their index finger became caught between the drive belt and pulley. They sustained a crush injury to the fingertip that was medically amputated to the distal joint.,0
"An employee was walking at a job site and stepped in to help other employees get a conduit bender down some stairs. The bender struck the employee in the back and pinned him to the stairs, resulting in five rib fractures.",1
"An employee was placing a piece of plywood on a table saw. As he was sliding the plywood off a cart and onto the table saw, the plywood started to fall. The employee stepped back then fell forward, landing on top of the plywood on the concrete floor. The employee fell on his left hip, resulting in a femoral head fracture that required hospitalization and surgery.",1
"An employee was cleaning at a job site. After moving plywood that was covering a hole, the employee fell through the floor, resulting in an injury to the right wrist and side.",1
"An employee was pouring paint from one tote to another when the elevated tote fell into the lower tote. The lower tote then fell onto the employee, resulting in a right forearm fracture.",1
"On April 19, 2023, an employee was unhooking material from a chain on a hoist when their fingers were pinched, resulting in an amputation to their right middle fingertip.",0
"On April 19, 2023, at 3:30 PM, an employee's arm was caught in a printing press, resulting in a fracture that required hospitalization.",1
"An employee was operating a forklift and scanning a barcode. The employee went to exit the lift when his left foot struck the edge of the lift, causing him to fall to the floor. The employee was hospitalized for a hip fracture.",1
"An employee was operating a roller and loading it onto a trailer that was at a steep angle. The roller made it halfway up the ramp before descending in reverse and sliding sideways. The vehicle struck a sign pole and a downspout. As the employee dismounted the roller, his leg was pinned between the roller and the sign pole. He sustained a lower left leg laceration from the sign.",1
"An employee was preparing his truck to make a delivery of scrap metal. To remove the tarp covering, he turned on the roll tarping system. The mesh tarp got stuck on a piece of metal and as the employee went to move the tarp, his arm was pulled into the bracket shield. The employee sustained a fractured left forearm that required surgery.",1
"An employee was stacking pallets when they tripped over pallets and fell, resulting in a hip fracture.",1
"An employee was helping another employee close a truck door. The door came down on his right middle finger, amputating the tip.",0
"An employee was clearing a path to transport a patient outside. She slipped on a wet mat and fell to the ground, resulting in a fractured thigh.",1
An employee was caring for a patient when they were punched in the face by the patient. The employee was hospitalized.,1
An employee was clearing ground meat from a meatball machine when her right middle finger was caught in the machine and approximately 1/4 of an inch of the fingertip was amputated.,0
"An employee was delivering a package when they fell down a flight of concrete stairs, resulting in a broken left arm, concussion, and eye injury.",1
"An employee was threading pipe using a pipe threader and a pipe wrench when his finger became caught and crushed between the two objects, resulting in a left middle finger amputation.",0
"A pressure-activated nail gun made contact with an employee's knee, causing a 3-inch nail to puncture the knee.",1
"An employee was on an 12-foot A-frame ladder using a broom to clean snow off a satellite dish. He slipped and fell 10-11 feet, sustaining a compound leg fracture.",1
"An employee was retrieving his toolbelt from a roof when they fell and landed 12 feet below. The employee sustained bleeding from the head/face, possible head and neck injuries, and a wrist injury.",1
"An employee was using an A-frame ladder to change a lightbulb in a barn. The lightbulb slipped and fell to the ground. As the employee went down the ladder to retrieve the lightbulb, his foot slipped and he fell approximately 3 feet to the ground. The employee sustained three left hip fractures and abrasions to the elbow.",1
An employee was standing on the side of the road directing traffic. A car was turning left and struck a passing vehicle. The struck vehicle was propelled off the road and into the employee.,1
An employee was working in a new construction area where other employees were stripping plywood. A piece of plywood fell on top of him and the employee sustained a left little finger fracture.,1
"On April 19, 2023, at 11:30 AM, an employee was preparing to transport equipment when a 30-pound, 18x18 metal pipe base slipped from the employee's hand and landed on their foot. The employee sustained a left big toe fracture that required hospitalization and surgery.",1
An employee was walking through the front door to return from their break when they tripped over a back pack and fell. The employee sustained a right hip fracture.,1
An employee was walking through the deli kitchen area when they tripped and fell into the corner of a table and landed on the floor. The employee sustained a broken nose and a concussion.,1
"On April 19, 2023, an employee was performing maintenance on a mail sorting machine. As he was walking toward the back of the machine, the employee went to step over the tow hook of an electric cart mover and fell to the floor. He sustained facial contusions and a right arm fracture.",1
"An employee was walking on a scaffold when he struck a formwork tie and fainted. He then fell off the scaffold into a transport box, resulting in fractures of a bone next to his ear and his femur.",1
An employee was on stilts to install material on the second floor. The employee fell to the first floor and sustained a fractured left wrist and a concussion.,1
"An employee was returning carts to the store when she tripped over the bar in the cart corral and fell, fracturing her left knee and right elbow.",1
An employee was installing a strand to hang fibers below the power lines when a new pole fell on the employee's back. They experienced an electric shock and sustained third-degree burns.,1
"An employee was operating a rider pallet jack to move a pallet of egg cases in the warehouse. The pallet jack backed into a pallet of egg cases, fracturing the employee's right knee.",1
"Two employees were cleaning out a road widener. The injured employee  was standing in front of the road widener using a hose to clean out concrete from the equipment. The seat in the cab turned and bumped a lever, causing the road widener to move forward. It knocked the injured employee to the ground and then rolled over him. The employee was hospitalized with a broken ankle.",1
"An employee was positioning a valve on a flange when his fingers became caught between both parts, resulting in a left middle finger amputation below the fingernail.",0
"An employee was climbing a ladder when the ladder slipped, causing him to fall approximately 8 to 10 feet to the ground. He landed on his left leg, resulting in a broken tibia and fibula and a dislocated ankle.",1
An employee was cutting an onion with a chef's knife. The knife partially amputated the employee's left thumb.,0
An employee was participating in hostage rescue team selection in 85-degree heat when they experienced dehydration and a heat-related muscle injury.,1
"A temporary employee was moving a portable electric fan when his right index finger contacted the spinning, stainless steel blades, resulting in a fingertip amputation.",1
An employee was clearing plastic material from a rotary airlock when they sustained an amputation of the right index finger above the first knuckle.,0
"An employee was moving a steel coil using a jib crane. The nylon strap holding the coil failed, causing the coil to land on the employee's right foot. The employee sustained multiple toe fractures.",1
An employee was trying to stop a dog from attacking a resident when the dog bit the employee's lower leg.,1
An employee was unloading wood trusses from a trailer when a few trusses fell and struck him. The employee sustained a hip fracture.,1
"An employee was working on a tractor trailer in the shop. As he was removing a spring pin for the front suspension, the spring unloaded stored energy and caught the employee's right middle finger between it and the mounting bracket for the spring. His right middle finger was amputated to the first knuckle.",1
"On April 20, 2023, at 7:20 AM, an employee was removing a tire from a conveyor when their left ring finger was caught between the tire and conveyor belt. The employee's left ring fingertip was amputated.",1
"An employee was operating the tenderizer when a piece of steak became stuck in the machine. The employee went to remove the steak when the machine activated, causing the employee's glove to become caught on the tenderizer. The employee's ring finger was amputated at the first knuckle. The machine was unguarded at the time.",1
An employee was lifting a catwalk to perform work underneath of it when his left thumb was pinched and amputated by the catwalk.,0
"A police officer was responding to a fire in a dormitory room. After entering the room, the employee suffered smoke inhalation and was hospitalized.",1
An employee was walking in a resident's room when she tripped over a blanket hanging on the bed and fell. She sustained a right wrist and pelvis fracture.,1
"An employee was unjamming a truss that was being manufactured when his right ring finger became stuck on the truss. He sustained a contusion, fracture, and avulsion to the finger that required hospitalization and surgery.",1
An employee was servicing a rooftop exhaust fan when they sustained a partial amputation to the right thumb.,0
"An employee was on a scissor lift performing a pipe extension when an overhead crane that runs north and south in the bay struck the scissor lift and tipped it over. The employee fell out of the lift and landed on the ground, resulting in a left femur fracture.",1
An employee was performing work on a light tower in the shop when they were bitten by an insect. The employee experienced swelling of the right middle finger and was hospitalized.,1
"On April 20, 2023, an employee was using an electric-powered nail gun to build wooden pallets when his left ring finger was punctured by a nail. The employee was hospitalized.",1
"On April 20, 2023, an employee was working on the roof of a one-story residential home. He was adjusting his lanyard's length when he slipped and fell approximately 12 feet off the roof, landing on the concrete driveway. He was hospitalized with two broken arms and a head injury.",1
An employee was driving a utility task vehicle (UTV) when the vehicle struck a tree. The employee sustained a fractured left knee.,1
"An employee was cleaning and maintaining the outfeed waste conveyors when their right hand was caught in the drive chain. The employee sustained an index fingertip amputation, a laceration to the middle finger, and a ring finger subungual hematoma and non-displaced fracture.",0
"On April 20, 2023, employees were sanitizing an incline auger in the chili meat grinding room. The injured employee lost their footing and fell, striking the back of their head. The employee sustained a concussion that required hospitalization.",1
"On April 21, 2023, an employee was transporting a stack of pallets using a powered industrial truck on a dry dock. The vehicle collided with a guardrail and the employee sustained right leg fractures.",1
"An employee was moving cars off a semi-trailer parked at a car dealership. The employee slipped and fell off the trailer deck to the ground below, resulting in multiple fractures.",1
"An employee was working in a warehouse retrieving rims off a moving conveyor. While removing a rim, his little finger was pinched between it and a stationary handrail, resulting in a fingertip amputation.",0
"An employee delivered material to a customer's store and was leaving the location when they tripped over a box and fell, sustaining a hip fracture and a bump on their head.",1
"An employee was descending a scaffold ladder. He fell from the ladder, landing about 10 feet below and suffering a broken left leg. He was hospitalized and underwent surgery.",1
"An employee was releasing a clamp from a steel girder. The employee slipped and the steel clamp he was holding fell onto his left leg, puncturing his thigh.",1
"An employee was helping to load logs onto the back of a chip truck. One of the logs started to roll off the truck, and the employee's hand was caught between the log and the truck, resulting in a laceration and a fracture.",1
"An employee was fixing a cooling unit when they sustained an electric shock, resulting in hospitalization.",1
The injured employee ducked under flooring materials that were on a cart being moved by another employee. The materials struck the injured employee resulting in a laceration under their eye.,1
"An employee was closing a butterfly-style trailer door when he fell to the lower step of the trailer and the ground, resulting in torn knee tendons.",1
"An employee was working on a 35,000-pound I.D. fan. As the employee rotated the blades with his foot, the blades continued to spin, lacerating his right foot and amputating a toe.",0
"An employee was involved in a physical altercation with another employee, resulting in a fractured jaw and collarbone.",1
An employee was operating a stand-up forklift when the vehicle collided with a rack/support pillar. The employee was hospitalized with broken bones in their left leg.,1
"An employee was moving a scissor lift through the doorway of a building when his head was pinched between the scissor lift and the door frame. The employee sustained head trauma as well as cuts, contusions, and fractures.",1
"An employee was removing a piece of rubber from underneath a rail car. The employee's leg was caught between the tail pulley and the conveyor belt, resulting in leg and ankle fractures. The employee was hospitalized.",1
The injured employee was stabbed in the abdomen by another employee with a knife. The injured employee was hospitalized.,1
"An employee was cutting wood using a miter saw when the piece of wood shattered, drawing the employee's left hand into the blade. The employee sustained a severe laceration on their left hand.",1
"An employee was setting up for the day and began climbing the scaffold. As the employee got to the second step, he fell approximately 2 feet to the ground and landed on his back. The employee sustained rib fractures.",1
"An employee was building a wooden pallet using a pneumatic nail gun. When he activated the nail gun, the nail exited through the corner edge of the board and punctured his hand, going through the fifth metacarpal bone.",1
A customer punched an employee in the face. The employee suffered a broken jaw and a concussion and was hospitalized.,1
An employee was installing process piping when a steam valve was opened and the employee was struck by the steam. They sustained burns to their lower extremities.,1
"A door closed on the tip of an employee's right middle finger, causing a fingertip amputation.",0
"An employee was standing at ground level and looking in the back of a tractor trailer to take inventory. A forklift that was loading product, backed into the injured employee and caused them to fall. They sustained injuries to the legs and feet.",1
An employee was cutting a two-by-four with a table saw when the blade struck a knot and the board kicked out. The employee's right index finger was amputated.,0
"On April 21, 2023, at approximately 9:35 a.m., an employee was clearing a piece of chicken jammed in a deboning machine. The employee's arm got caught in the machine, resulting in a laceration with muscle and tendon involvement. The employee was hospitalized.",1
"An employee was walking to the refrigerator in the cafeteria when they lost their balance and fell to the floor, sustaining a broken kneecap.",1
An employee was cutting the trim of a doorway on a table saw when they sustained three finger amputations to their right hand.,1
"An employee stepped off a lift to observe a pipe that was installed. As they walked onto the mesh part of the racks, they fell 16 feet through an area without mesh. The employee sustained a left arm fracture.",1
An employee tripped and fell while following a patient who was trying to leave the emergency department. The employee suffered a collapsed lung.,1
"An employee was reaching around a conveyor when their finger was caught in a pulley, resulting in a partial left index finger amputation.",1
"A security employee was driving a golf cart in an industrial park when the cart was struck head on by a vehicle. The employee was ejected from the golf cart and sustained fractures to the pelvis and hips, requiring hospitalization.",1
An employee was working as a sales clerk when a customer came in to rob the store and shot the employee in the leg.,1
Employee 1 was using a power washer to clean out a base coat pit. Employee 1 slipped and fell and the pressurized spray contacted a co-worker's right thigh and lacerated it.,1
"An employee was helping a customer and placed a basket on the floor. As she continued to work, the employee tripped over the basket and fell, sustaining knee and femur fractures.",1
"An employee fell while coming down a step ladder, landing on the ground and suffering an open fracture to the foot and ankle.",1
An employee was lifting a six-gallon case of milk in a dairy cooler when they experienced abdominal pain and swelling.,1
An employee was walking to take her break when she slipped on a blueberry and fell to the floor. The employee sustained a hip fracture that required hospitalization.,1
An employee fell down stairs and landed on electronic equipment.,1
An employee was preparing to make wire terminations in an electrical switchgear. The employee contacted exposed wires and was shocked and burned.,1
"An employee was performing maintenance on a conveyor system. As they were installing a guard on a drive chain, the employee sustained amputation of the middle, ring, and little fingers between the nail and first knuckles.",1
"An employee was cleaning a pasta processing machine when her finger was caught in the machine's rollers, resulting in a right index fingertip amputation.",1
"An employee was operating a forklift with a tow strap looped around his shoulder. The tow strap was caught by the tire of the moving fork truck, and the employee fell out of the fork truck to the concrete ground. The employee sustained a broken femur.",1
"An employee had removed a grate to clean a clogged mixer. After cleaning the mixer, the employee started it and began making a batch. The employee's hand was caught in the mixing lathe; the employee suffered dislocated fingers and a laceration.",1
"An employee had just finished installing steel on a structure and got back into the aerial lift basket. As they were returning to ground level, the basket contacted overhead electrical lines, resulting in electric shock and burns.",1
"Employees were installing a gullwing for a PDS. The gullwing got in a bind; the bind then released and struck the injured employee in the face, causing fractures to the nose and eye socket.",1
"While lifting cases of wine bottles, an employee felt pain in her back. The employee sustained a hernia and required surgery.",1
An employee was driving a dock stocker when it ran into a steel column. The employee's left leg was caught and injured between the column and the dock stocker.,1
An employee slipped and fell to the ground and suffered a broken lower right leg.,1
"An employee was inspecting a bridge from an aerial lift basket of a bucket truck. As the basket was moved, the employee's hand was caught between it and the bridge. The tip of the employee's thumb was lacerated and amputated.",0
An employee was lining up rail cars using the remote control for a locomotive. One of the rail cars moved and pinched the employee between the couplers of two rail cars. The employee sustained blunt force trauma to the right hip.,1
An employee was driving an electric pallet jack when it struck a storage rack. The employee suffered rib fractures.,1
"On April 23, 2023, at approximately 7:30 a.m., an employee was cleaning a cast trough when he was sprayed with molten aluminum. The employee was hospitalized for burns.",1
An employee was clearing a jam from a conveyor table. A chain and sprocket in the machine caused the amputation of the employee's left middle fingertip.,1
"An employee was cleaning the fabrication machine. While cleaning the machine, the employee contacted moving parts and sustained a partial amputation to a finger.",1
"At 11:03 a.m. on April 23, 2023, an employee was checking the tension on a machine when their right index finger was caught in its chain and sprocket. The finger was medically amputated at the middle knuckle.",0
"Three employees were moving a lathe machine that had been put on skates. While adjusting a skate to change its direction, the skate was knocked out from under the machine. The lathe then fell, striking an employee's right leg and breaking their tibia. The employee was hospitalized.",1
"An employee was checking stock in a back room. The employee slipped on liquid, fell, and suffered a broken left hip.",1
An employee was removing a handrail system when they stepped back into a hole that contained hot liquid. The employee was hospitalized with second-degree burns to the right lower leg and spots on the right upper leg.,1
An employee was repositioning a brake press when they were struck and pinned by it.,1
An employee was sorting cows for processing. The employee had just grabbed a metal gate to shut it when a cow bumped into the gate. The employee's right middle finger was crushed between the gate handle and the channel iron on the post. The fingertip (including about 3 millimeters of bone) was medically amputated.,0
An employee was operating a plastic blow mold machine. The employee's right middle finger was caught in the machine and amputated.,0
"An employee was participating in training. As they were jogging, they sustained a muscle injury.",1
"An employee was working on a resistance welder. The welder activated, and a copper pin on it caused an amputation to the employee's left middle finger.",0
"On April 24, 2023, at 3:20 AM, an employee was working from a mobile ladder to clean a camera mounted on a sanitation truck. As the employee grabbed the truck to move the ladder sideways, the ladder tipped over, causing the employee to fall 10 feet. They were hospitalized for a shoulder fracture, torn spleen, and bruising to the brain.",1
"An employee was using a hammer and chisel to remove a key stock that was fitted/attached between a keyway of a mixer shaft and a mixer gearbox keyway. When the key stock was removed, the mixer shaft spun free and the employee's left hand was caught between the keyways. His left middle fingertip was amputated.",0
"An employee was ascending stairs outside a home. She fell and hit her head on the ground, losing consciousness and suffering head and mouth injuries.",1
An employee was readjusting/repositioning themselves on a ladder when they fell to the floor and sustained a left ankle fracture.,1
An employee was knocked down while trying to break up a fight between inmates. His head and upper body struck the metal seat of a dining table before he landed on the concrete floor. He suffered head trauma and a shoulder injury.,1
"An employee slipped on a clear cosmetic substance on a store floor. She fell, suffering a head laceration and a concussion.",1
"An employee was lifting a beam using a strap. The strap broke, and the beam fell on the employee's right foot, crushing the steel-toe boot. The employee's big toe and second toe were amputated.",1
"An employee was loading pallets into a shipping container using a forklift. As he was using a piece of wood to push in a pallet and close a gap, his hand became stuck between the wood piece and the pallet. He suffered a finger injury while removing his hand that required medical amputation.",0
"On April 24, 2023, an employee was walking toward the drainage basin area to empty a bucket of dirty water when she tripped over a 2-3-inch transition barrier that is between the warehouse and the drainage basin. The employee fell to the ground and sustained a right leg fracture that required hospitalization.",1
An employee was exiting the freezer in the bakery department when they slipped or tripped and fell to the floor. The employee sustained a hip fracture.,1
"While clearing a clog inside a pillow fill machine, a temporary employee's fingertip was amputated by the blade mechanism.",0
"On April 24, 2023, at 7:55 AM, an employee was preparing their work area when their arm and hand became caught in the belt of the line. The employee sustained a right lower arm and hand fracture.",1
"An employee was squatting to inspect a dough mixer. She struck her head and lost her balance, causing her to grab onto a piece of machinery. The machine crushed her right index finger, resulting in an amputation.",0
"An employee was working from a baker scaffold to install drywall on the top portion of an interior wall that separates the living room from the bedroom. As he went to place his right foot on the third rung, his foot slipped through the ladder section frame, causing him to fall backward 3.5 feet to the ground. The employee landed on his head/neck, resulting in a C2 vertebral fracture as well as a head contusion.",1
"An employee was using a water hose attached to a boiler to clean up fat around the boiler. The hose broke and sprayed hot water onto the employee, who suffered second-degree burns to the stomach and thighs.",1
"An employee jumped from the bottom step of a tractor to the paved parking lot 12 inches below. His legs buckled and he fell, suffering a broken left ankle and a torn ligament above the right knee. He was hospitalized.",1
"An employee was working underneath a boiler when a sudden flash occurred, resulting in a fire in and underneath the boiler. The employee sustained burns to the face, neck, head, torso, and arms.",1
"An employee was retrieving paint from a trash box that had been raised with a forklift to a second story balcony. The employee fell from the second story, landing about 18 feet below and suffering a dislocated right shoulder and a broken right elbow.",1
"An employee was loading fittings into the back of his vehicle when a fuel truck backed into the employee, pinning him between the tailgates of the two vehicles. The employee sustained a hip fracture that required hospitalization.",1
An employee was helping erect a batting cage when it fell and struck his head. The employee sustained a skull fracture.,1
"An employee was going to sit in a chair with wheels when the chair moved to one side, causing the employee to fall to the floor. They sustained a left hip injury and was hospitalized.",1
"An employee was retrieving a part. A nearby machine activated and amputated the tip of the employee's middle finger, as well as crushing the employee's index and ring fingers.",0
"An employee was installing a light pole when its arm broke and fell. The globe portion struck his head, causing lacerations and a possible concussion.",1
"An employee was using an overhead gantry crane with a hoist to install a hydraulic cylinder onto a boom of an excavator. The strap that was used was cut by one of the cylinder brackets, causing the cylinder to fall onto the employee's left arm. The employee sustained a fractured forearm.",1
"On April 24, 2023, an employee was locating a part on the lower electrode of a resistance spot welder when his right thumb was crushed by the welder. The employee sustained a revision amputation.",0
"An employee was working on a pickup truck. While working on the ground near the front of the truck, he released a clamping pin that held together the lower engine coolant line. The coolant pressure rapidly blew the hose apart, causing the hot coolant to strike the employee's face, chest, and upper arms. The employee was hospitalized with burns to his upper body and face.",1
"On April 24, 2023, an employee was cleaning the chain and sprocket of a conveyor machine with a rag. The machine caught the rag, and the employee's fingertip was amputated.",0
An employee was unloading freight from a trailer when the freight struck the roll up door. The door came down onto an employee causing them to fall to the ground and sustain a skull fracture and laceration.,1
"An employee was repairing a hydraulic hose and cutting the hose to specification using a sawing machine. The employee's hand contacted the saw blade, resulting in the partial amputation of the right middle finger.",0
An employee was unpacking an ice bagger that was approximately 6 feet long and 10 feet tall and weighed 300-400 pounds. The machine was on the ground in a crate. The employee was removing the crate when the machine tipped over and crushed his leg.,1
"An employee was directing a forklift driver to put a metal table (jig) in place. The table slid off the forklift and struck the employee's right leg, pinning him against a set of stairs. The employee sustained a broken femur and was hospitalized.",1
"An employee was operating a punch press. As he was positioning a piece of leather in the machine, the press cycled and the die came down on his right hand. He suffered an amputation to the middle finger at the first knuckle.",0
"On April 25, 2023, an employee was using a machine that fills sachets with hair care products. The blade activated while she was feeding film into the cutting area and amputated her right middle fingertip without bone loss and lacerated her right index finger.",0
"An employee was picking up a case from a rack using an order picker. The employee fell from the picker to the floor about 14 feet below, suffering a spinal fracture at the lower back.",1
The injured employee was helping to put a sling on pipes to weigh them. A pipe rolled onto their feet and crushed them. The employee was hospitalized.,1
"An employee opened the valves on a trailer. The valves released sodium hydrosulfide fumes, which overcame the employee. The employee was hospitalized.",1
An employee was using a rotary mower attachment to mow a field when it ran over a piece of rebar causing the rebar to fly up and strike the employee's forehead. The employee sustained a laceration requiring hospitalization.,1
An employee was holding a tag line for a metal form brace. A forklift ran over and possibly fractured the employee's left foot.,1
An employee was responding to a work order relating to a machine that was not cooling when the lid of the machine lowered onto the employee's thumb. They sustained a left thumb fracture and partial amputation that required hospitalization.,1
A security guard was assaulted by four patients. His left ear was severed.,1
"An employee was working at the chocolate unit and stepped off the work platform to walk around the machine when they slipped on the wet floor and fell, fracturing their right femoral neck.",1
"An employee was loading a coil onto a forklift when the coil fell and the employee, causing him to fall on his left arm and sustain elbow and ankle fractures.",1
"An employee was installing a clean bran mash hopper when their right little finger was caught between the hopper and a pipe, resulting in a fingertip amputation.",0
An employee was pulling boards from a storage rack when the material fell onto their legs. The employee sustained foot and leg fractures.,1
"On April 25, 2023, at approximately 6:20 p.m., the injured employee was observing his co-workers as they used a chain to the lift the metal lid from a launder machine (a piece of equipment that holds and processes copper). The chain shifted, causing the lid to shift. Copper debris fell off the lid, striking the injured employee and fracturing the right side of their jaw.",1
"An employee was adjusting the forks of a forklift while the forks were resting on a dividing retention bar. The forks swung and pinched the employee's finger against the bar, causing a laceration that required surgery.",1
An employee was unjamming a sheeter knife machine when they sustained a partial left middle finger amputation. The machine was guarded at the time.,1
"An employee was working from a scaffold. As they leaned against the rail of the scaffold, it gave way, causing the employee to fall to the concrete floor below. The employee sustained a right thumb fracture and a chest contusion.",1
"On April 25, 2023, an employee was participating in a training on the pallet jack battery charger. The employee was operating the pallet jack to line it up to the new battery. As he went to realign the vehicle, the reverse function was activated, and the pallet jack backed into a rack. The employee was pinned under the rack, resulting in a chest laceration that required hospitalization.",1
An employee was cutting meat with a meat saw and lacerated his right thumb tip.,1
"An employee was working with an excavator operator to shovel outside of a manhole so that a barrel could be removed. The bucket fell off the excavator into the hole and landed on the injured employee's right leg, resulting in multiple compound fractures.",1
"An employee's left hand was caught and crushed in the die of a brake press, resulting in the amputation of two fingers.",1
"An employee was transporting a lift with casters to the maintenance shop when they fell to the ground, resulting in a hip fracture.",1
An employee was operating a gantry crane to move pallets of sheet metal when the bottom of the wooden pallet released from the crane and swung toward the employee. The employee was struck on the left leg and sustained a fracture.,1
An employee was standing on a step ladder to retrieve a pack of boxes when they fell to the floor and struck their head. The employee also sustained a left knee injury.,1
"An employee was drilling holes in parts using a drill press. While holding a part with their gloved hand, metal shavings caught the employee's glove and pulled their hand into the drill. The employee sustained amputation of the left middle finger at the first joint.",0
"An employee was cutting concrete on a footer to remove a damaged inbuilding riser. During the cutting process, the employee stepped to the side to change location, slipped in the mud, and the  blade of the cutoff saw lacerated his left knee.",1
"An employee was operating the trimmer when a piece of wood/board became stuck. The employee went to remove the board and their hand was caught in the chain and sprocket, amputating the employee's right index fingertip and the right thumb tip.",0
An employee was working at a remote drilling site. The employee was in the derrick preparing to come down when they fell approximately 55 feet to the deck below.,1
An employee was operating the automatic packaging line. The employee went to clear a jam and sustained a left thumb amputation.,0
An employee was running conduit and wires through the attic of a residential home. He was traversing the rafters when he misstepped and fell through the sheetrock between the rafters. He fell approximately 20 feet to the ground and sustained a fractured right elbow.,1
"An employee was troubleshooting a device while utilizing supplied breathing air and with the tank hatch open. As the employee unscrewed the cap to review the device status, a flash fire occurred at the top of the tank. While navigating to the staircase to exit the tank, the employee sustained second-degree burns to the left hand and forearm as well as burns to right hand, right arm, neck, and ear.",1
"An employee was standing behind the counter. As he walked away from the cash register, he tripped on a box and fell, striking his head on the edge of the counter. The employee sustained a head laceration and a broken hip.",1
"On April 26, 2023, at 4:00 PM, a maintenance technician was performing visual checks near a purger. The employee used a wrench to rotate the valve toward the open position and anhydrous ammonia released from the valve and was inhaled by the employee. The employee sustained chemical burns to the chest with difficulty in breathing.",1
"On April 26, 2023, at 4:00 PM, an employee was applying a beeswax release agent to the core and mold of a piece of equipment when the bristle brush was dropped into the equipment. As the employee went to retrieve the brush, their right hand was caught between the core and mold, resulting in fractures and burns.",1
"On April 26, 2023, an employee was using a jack to raise a machine carousel to replace a bushing. The jack slipped, causing his right little finger to become pinched between the jack and the carousel. His right little fingertip was amputated without bone loss.",0
An employee suffered an abdominal and back injury while lifting a 50- to 60-pound box.,1
"An employee was leaving work when she tripped on a floor mat and fell, resulting in a fractured hip.",1
"An employee was running a cut-off machine that cuts metal for bird screens when a part would not come out of the machine. As the employee went to extricate the stuck part, the machine actuated and amputated the employee's fingertip.",0
"On April 26, 2023, an heavy metal grate fell while it was being moved. It landed on an employee's left foot, causing a fracture and partially amputated toes. The employee was hospitalized.",1
"An employee was on the bumper of a van that was taking materials back to the stationary area. The employee fell off, striking his head on the pavement. The employee suffered brain hemorrhaging that required surgery.",1
"An employee was working when a customer picked up a jump box and fled the store without paying. The employee was then struck by the customer's vehicle, resulting in ankle fractures.",1
An employee was rolling steel for columns. The employee was inspecting the ring's seams to ensure that both sides were lined up when the seam moved/shifted and amputated his left middle fingertip.,0
"An employee was cutting a metal clamp using a cordless grinder. The grinder became pinched and bound up, causing it to kick back and contact the employee's left thumb. The employee sustained a left thumb tip amputation.",0
An employee was dismantling scaffolding from an elevated platform when they lost balance and fell 30 feet through an opening in the planking.,1
An employee was standing outside petting a customer's dog when the dog bit the employee in the face.,1
"An employee put a choker chain around a metal T-frame beam. As they went to tighten the chain, their right thumb was pinched between the chain and the beam.",1
An employee was operating a forklift in reverse when their hand was pinned between the forklift cage and pallet racking. Two of the employee's fingers were amputated.,1
A welder was using an oxy-acetylene torch in a dry dock for a ship repair and sustained burns to the hand.,1
An employee was cleaning a conveyor belt when the conveyor system was activated and the employee's right hand became caught in the conveyor belt and return roller. The employee sustained multiple fractures to their right arm and hand.,1
An employee was cleaning the rollers of a sheet metal forming machine when their left hand was pulled into the roller and crushed. The employee's left ring fingertip was amputated.,0
"On April 26, 2023, at 9:50 AM, an employee was installing a ladder rack on a company vehicle when the lowering arm of the ladder rack shifted, causing a bolt to slip and catch the wedding ring on his left ring finger. The employee sustained a laceration/avulsion to the left ring finger between the first and second knuckles that required hospitalization.",1
"An employee was performing periodic maintenance on an HVAC unit. As he was cleaning the belt on the drive motor, the belt caught his glove, causing amputations to his right index, middle, and little fingers.",0
"An employee was on the sixth or seventh step of an 10-foot A-frame ladder running electrical wire though a conduit. The wire became stuck in the conduit and the employee tugged on the wire. As the wire broke loose, the employee lost his balance and fell to the concrete surface below. The employee sustained two wrist fractures, contusions to the elbows and knees, and a laceration over the right eye that required stitches. The employee had surgery on the left wrist.",1
"An employee was building a re-engineered boat storage building using a telehandler. The employee was unloading cables from a semi-truck using the telehandler when cables shifted, causing the telehandler to start tipping. The band holding the cables broke and the vehicle fully overturned. The employee's left leg was pinned by the vehicle, resulting in a lower leg amputation.",1
"An employee was in an elevated bucket installing internet fiber on poles. As the employee was installing a wire from one pole to another in the alley, a car drove over the wire and caught the wire, pulling it taut against the employee. The employee sustained internal injuries and injuries to his hand that required hospitalization and surgery.",1
"An employee was unloading a pipe from a fitted rack on his truck. As the employee grabbed a pipe strap, his glove became caught. The employee then went to step off the back of the truck and the top inch of his left hand ring finger was partially amputated.",0
Two employees had finished cleaning a golf cart and were riding it back to the shop at the end of their shift. The golf cart went off the path and into a deep gulley. One employee was hospitalized with a fractured pelvis and head contusion.,1
"An employee was leaving work after his scheduled shift. As the employee walked down a steep, grassy area that was wet and muddy from rain, he slipped and fell to the ground. The employee was hospitalized for left tibia and calcaneus fractures that required surgery.",1
An employee was troubleshooting an error on a servo motor under a stacker carriage when they sustained a partial amputation to the tip of their thumb and thumbnail.,0
"An employee was opening an interlocked door to troubleshoot a servomotor. Once the motor was placed properly, the stored pneumatic energy moved the carriage and caused the employee to sustain an amputation to their thumb.",0
"An employee was on a ladder, running electrical wire, when he fell to the floor and struck his head. The employee was knocked unconscious and sustained a brain bleed.",1
An employee was driving an all-terrain vehicle (ATV) when the vehicle tipped over. The employee sustained a left leg fracture.,1
An employee was walking when she was struck in the lower left leg by a forklift backing out of a tractor-trailer. The employee sustained abrasions to the left ankle and foot that required surgery.,1
"A maintenance employee was helping to troubleshoot a fault in the hoist on a bottle line de-palletizer. A broken sprocket needed to be removed in order to level the hoist. The machine was locked out/tagged out and the cover of the chain and sprocket was then removed. The employee used a pry bar to pull back and relieve the tension on the chain that was attached to the sprocket, in order to guide the sprocket out with his left hand. The pry bar slipped out and the chain snapped back, which caused the sprocket to shift. The employee's left middle finger was pinched between the chain and sprocket and the fingertip was amputated.",0
"An employee was walking on top of a crane engine compartment to grease the boom hoist sheave when they slipped and fell, resulting in a shin fracture.",1
An employee was lifting a beam with an overhead crane. The hook shifted and the employee's right ring finger was caught between the hook and the flange of the beam. The finger was partially amputated.,0
"On April 27, 2023, at 7:05 AM, a machine operator was removing a stuck part from a pneumatic die tool and amputated their left middle fingertip.",1
"An employee was walking to a locker when they stepped over a wet floor sign, tripped, and fell. The employee sustained a right arm fracture.",1
"An employee was standing on part of an extension ladder when the ladder slipped out from under him, causing him to fall 4 feet to the ground. The employee sustained a left hip fracture.",1
"An employee was climbing a ladder to apply a belt dressing on a moving head pulley. Their arm became caught in the pulley, resulting in a laceration that required stitches.",1
An employee was using a knife to cut pineapple and amputated the tip of their left thumb.,0
"An employee was on an elevated forklift man basket hanging a tarp on the top of a stack of bins to provide shade to the outdoor work area. A gust of wind pulled the tarp, causing the man basket to slide on the forks. The man basket then slid off the forks and the employee jumped out of the basket as it fell, resulting in a closed fracture of the T12 vertebra and a fractured left big toe.",1
"An employee was working on a machine when it became jammed. As the employee went to clear the jam, she sustained lacerations to two fingers and a partial amputation to the left ring finger.",0
"An employee was on an 8-foot ladder installing a pipe in the truss. He nailed a 2x4 between two trusses with a nail gun to hold the pipes. As the employee leaned slightly to line up the pipes before securing them, the board broke free, causing him to fall to the concrete floor. The employee sustained a left hip fracture.",1
"On April 27, 2023, at 8:24 PM, an employee was walking away from his workstation when he collided with a piece of wood and fell to the ground. He struck his head on the concrete and sustained an occipital skull fracture and laceration to the back of the head. The employee was hospitalized.",1
"Employees were using a pickup truck to move a 16-inch poly pipe across a road. The injured employee was directing traffic. As the pipe pulled parallel to him, it struck his leg, resulting in a broken femur.",1
"An employee was operating a powered industrial truck using the coast function. The vehicle had not yet come to a complete stop when the employee walked in front of the vehicle, resulting in an ankle fracture that required hospitalization.",1
"On April 27, 2023, an employee was working at the self-checkout assisting a customer. As she stepped in to assist the next individual, another customer turned and bumped into her. The employee was knocked to the floor, striking her left hip and head. The employee was hospitalized.",1
"An employee was reading a tension meter attached to a sling. The sling jumped and contacted the employee's left thumb, resulting in a partial amputation.",0
"A home health aid was working in a patient's home when she fell down the stairs. The employee was hospitalized with broken fingers, a sprained neck, and a broken femur.",1
An employee was working in the cooling line area. He was picking up a clamp that had fallen between two rails when his hand was caught between a cart and the hydraulic mechanism that pulls the carts. His middle finger sustained an avulsion and was surgically amputated at the hospital.,0
An employee was preparing to close a restaurant and was cleaning when he cut his hand. The employee was hospitalized with a severe laceration.,1
"On April 27, 2023, at approximately 10:15 PM, two employees were operating reach trucks alongside one another in a cold storage warehouse. As one employee was removing a pallet with their reach truck, the material began to tip while elevated. The injured employee exited their reach truck to move out of the way and was struck by the falling cases of material. The injured employee was hospitalized with partial paralysis due to a disc pressed against a nerve.",1
An employee was making drinks when he turned to his right quickly and twisted his left leg and dislocated his kneecap. The employee was hospitalized with a sprained left knee.,1
"On April 27, 2023, at approximately 10:20 AM, the injured employee was walking when they were struck by a forklift that was driving in reverse. He fell on his back and his right leg was caught between the rear right tire of the forklift and the ground, resulting in a laceration and strain to his left leg. The employee was hospitalized.",1
"An employee was on a ladder pouring concrete when a concrete hose burst, knocking the employee off the ladder. They sustained right hand and wrist fractures.",1
An employee was rebuilding a valve on a refrigeration system and had pumped down the ammonia in the system to conduct maintenance. He removed a cover and was sprayed by residual anhydrous ammonia. The employee sustained chemical burns to the face and hands and may have sustained a respiratory injury.,1
An employee was walking outside to inspect a steam condensate line when his foot slipped in mud on a decline. The employee's leg slipped out from under him and he caught himself with his hands. The employee sustained a lower leg fracture.,1
"An employee had been operating a pallet jack. They stepped off the pallet jack, took a few steps, and slipped on a wet substance on the floor of the warehouse. The employee fell and sustained a fractured left hip.",1
"An employee was using a miter saw to cut a piece of wood when the board jumped out from the saw, resulting in a partial amputation to his left thumb.",0
An employee was troubleshooting a control panel when they contacted an energized 480-volt fuse. The employee sustained electric shock and burns to their hand.,1
An employee was attaching a trailer to the back of a truck when their finger was caught between the trailer ball and the truck hitch. The employee sustained a fingertip amputation.,1
An employee was cutting bone marrow with a knife when they sustained a laceration on their right middle finger.,1
"On April 28, 2023, an employee was installing new wire upgrades to a self-checkout cash register. While pulling the electrical wires through a hole on the bottom of the register, they sustained a left middle fingertip amputation from the sharp metal on the cash register frame.",0
"An employee was bending sheet metal on a brake press when their fingertip was caught in the point of operation, resulting in a fingertip amputation.",0
An employee was lowering a hand saw to cut a steel beam when the tip of his finger was amputated.,0
"An employee was checking the coolant level on the dump truck after it had been repaired earlier that day. As he was on the front wheel of the truck to remove the radiator cap, the employee was sprayed, causing him to lose his balance. The employee fell approximately 3 feet to the ground and sustained a right ankle fracture and dislocation.",1
An employee working in a warehouse fell from the second step of a ladder and sustained shoulder and elbow fractures. The employee was hospitalized.,1
An employee was pushing a cart through the kitchen when they tripped and fell on the floor. The employee sustained injuries to the chest including fractured ribs.,1
"An employee was setting up a pole and a floor jack to reposition wire inside of the drawing machine. When the machine was turned on, the wire struck the pole, causing the floor jack to kick out. The employee was struck by the jack and sustained a left kidney laceration that required hospitalization.",1
"An employee had the base of a traffic light pole on a base plate to be inspected. The employee rolled the pole over by hand, to shift and straighten it. The pole rolled off the welding table and his fingers were pinched between the base plate and the welding table. Multiple fingers on his right hand were fractured and lacerated.",1
"An employee was walking across a parking lot. They tripped over a parking block and fell, fracturing a hip.",1
An employee was pushing a cart through the door of a room where waste is stored. His hand was caught between the trash cart and the wall. His little finger was fractured and required hospitalization and surgery.,1
"An employee was chipping old concrete from inside the hopper of a concrete pump truck. The rotating paddles inside the hopper activated, fracturing both of the employee's legs.",1
"An employee lifted a tote, turned, and felt a sharp pain in his lower back. The employee sustained a spine fracture.",1
"An employee was operating a walkie-rider and backing into a pallet that was on racking. While elevating the pallet to remove it from the racking, the employee's left middle finger became caught between the mast of the walkie-rider and a racking shelf. The employee's fingertip was amputated.",0
"An employee was framing a roof and fell approximately 34 feet. The employee sustained bilateral foot fractures, a back fracture, and a bladder injury that required hospitalization.",1
"An employee was on a ladder working on an absorber tower. As the employee was taking the unit apart, a part struck him in the face and knocked him off the ladder. The employee sustained facial lacerations.",1
An employee was assisting another employee load a wooden crate onto a trailer. The crate fell off the forklift and struck the employee's foot.,1
An employee's right thumb was lacerated by the stream of pressurized water while power washing a deck.,1
"On April 28, 2023, at approximately 9:00 AM, two employees were lifting a steel rework table off the ground. The injured employee dropped the table and their right middle finger was caught and amputated between the table and the floor.",1
An employee was disassembling a trench box with an excavator when a support pole from the trench box entered the cab of the excavator through the front window and struck the employee. The employee sustained lacerations to their left hand and knee.,1
"Employees had unearthed an existing water line and were in the process of backfilling it using an excavator. The injured employee was in the trench using a tamp machine to compact the dirt. While dropping a load of dirt into the trench, the excavator struck the existing water line, causing water and sand to spray into the cab of the excavator and the operator's eyes. The excavator bucket then swung and struck the injured employee's left leg, fracturing their lower leg.",1
"On April 28, 2023, at approximately 9:05 AM, an employee was helping to steer a mobile paper cart when they fell onto the floor. The employee sustained a fracture to their right hip that required hospitalization.",1
A crew was tasked with preparing a dummy blade ring to be rigged and lifted for use. The overhead crane was lowered over the dummy blade ring for connection. The injured employee then signaled to the crane operator to slowly take the slack out of the nylon sling. A shackle on one of the 5-ton chain fall's hooks caught on the underside of the dummy blade ring face. This caused the ring to tip and fall toward the injured employee and pin the employee between the dummy blade ring and a blade ring on the deck. The employee sustained contusions.,1
An employee was operating a conveyor belt when they sustained a chest and arm injury.,1
"An employee was on a ladder installing shades when they fell from the ladder to the ground, resulting in an ankle fracture.",1
"An employee was installing treads onto a 12-step staircase that was being built. The employee slipped/tripped and fell off the side of the staircase to the ground 8 feet below, resulting in rib fractures and a head laceration near the eye socket.",1
"An employee was operating a standup forklift when the vehicle struck a rack system, pinning the employee between the crossbeam and the lift. The employee sustained a left hip fracture.",1
"An employee was retrieving a basketball that was stuck on a ledge, when they fell 10 or 11 feet from a ladder and landed on the hardwood floor of the basketball court. The employee was hospitalized with a concussion, lacerations to the head, and a possible skull fracture.",1
"An employee was working on the assembly line when he stopped the machine to remove stuck rubber material. After freeing the rubber material, the blade on the machine came down and lacerated his left little and ring fingers. The left ring fingertip was medically amputated. The machine was guarded at the time.",0
An employee was finishing a mat on a plunge router when their left hand was pulled into the blade. The employee sustained lacerations to their hand and ring finger that resulted in amputation.,0
"The injured employee was bracing a lever-action rifle on a counter top in a range booth while employee 2 was working to dislodge a cartridge that was stuck in the rifle chamber. While employee 2 was using a hammer to tap the round out, the primer ignited and the round detonated. A fragment from the brass shell casing struck the injured employee near their left eye socket and penetrated their left eye. The employee was hospitalized and required surgery.",1
"An employee was stepping down from an 18-wheeler when they slipped and fell on their knee, resulting in fractures to the femur and patella.",1
An employee was moving luggage on a luggage handling conveyor system when his right ring fingertip was caught and partially amputated between two rubber plates on the conveyor.,0
"An employee was servicing a front-end loader outside a coke pit. A coke drum was opened, releasing hot water and petroleum coke. This material went over a berm and as the employee ran away from the material, he fell to the ground and was burned by the hot coke and water. The employee was hospitalized.",1
An employee was delivering mail when they fell down a set of porch steps to the ground. They sustained a hip injury that required hospitalization.,1
"A temporary employee walked across a wooden pallet to retrieve product to stock. When he walked back across the pallet, it broke, causing the employee to fall to the ground and sustain a fractured hip.",1
An employee was diagnosing a problem with the vacuum on a printing press. The hose was removed and the employee's fingers were pulled into the open vacuum port and contacted the fan blade. The employee sustained a partial amputation of the right index finger.,0
An employee was removing a dock plate when they fell between the truck and the dock. The employee was hospitalized with a dislocated kneecap.,1
"An employee was using a 10-ton overhead crane to roll over fabricated steel. As the crane was let down, the steel rolled off the cart and landed on his feet. The employee sustained fractures to both feet.",1
An employee was leaning against a pallet when a walker-stacker struck the pallet. The vehicle then fell over onto the injured employee. The employee was hospitalized and required surgery on their left foot.,1
"An employee was refueling a compressor when the door on the compressor closed, striking the employee on the hard hat. The employee sustained a neck contusion.",1
An employee was disengaging a brake line from a semi truck while lying on the ground underneath it. The semi truck began driving away and the employee was struck by the truck. The employee sustained injuries that required hospitalization.,1
"An employee was working on a free standing switch gear section and wiring ground wire to the ground bar. A wire contacted energized equipment, resulting in an arc flash and the employee sustained burns.",1
"On April 30, 2023, an employee was opening a steam valve on the roof of a unit. A gasket failed and the employee was struck by 130 PSI steam resulting in first- and second-degree burns to the chest, shoulder, ankles, and calves.",1
An employee was operating a pressure washer on a job site when the pressurized water blast  punctured their boot. The employee sustained a right foot laceration that required hospitalization.,1
An employee was taking trash to the push dumpster and dropped something into the dumpster. The employee jumped approximately 3 feet into the dumpster to retrieve it and sustained a broken ankle.,1
Two machine operators were troubleshooting a sensor near the printing rollers of a machine. The injured employee was removing some paper accumulation on a roller when their right arm was drawn between the printing rollers resulting in a thumb laceration.,1
An employee was working on/checking a conveyor when their left middle finger was amputated.,0
An employee was performing janitorial duties when their finger became caught between a full-sized dumpster and a metal pipe on the wall. The employee sustained a fingertip amputation.,0
An employee was hospitalized with a broken hip after falling from a truck lift gate.,1
An employee was walking on the ground with an inspector when they were struck by a falling temporary guardrail. The employee sustained muscle and ligament tears as well as internal bleeding.,1
An employee was transferring cargo/freight from a K-loader onto a dolly. The pallet rolled to the opposite end of the dolly where the employee was standing and fell on him. He was crushed between a catering truck and the pallet and sustained chest injuries.,1
"An employee was clearing brush on a farming property using an excavator. As the employee exited the excavator, they slipped on the excavator track that was wet from the rain. The employee fell and suffered three fractured ribs that required hospitalization.",1
An employee was installing a belt on a fertilizer spreading machine when their lower left tibia was fractured by a moving chain and sprocket.,1
"An employee was walking from the office to the shop when they tripped and fell to the floor, resulting in a left leg fracture.",1
A maintenance electrical technician was troubleshooting a fault on the steel plant's water treatment river water pump when their left middle finger got caught in a knife gate valve. Their fingertip was partially amputated.,0
"An employee was shrink wrapping product on the hand shrink wrapper. As the employee went to tear the shrink wrap, his finger struck a sharp edge on the conveyor stand. The employee's fingertip was amputated.",0
"An employee was working on a vegetation widening project. While felling a tree, the employee used the escape route and stepped in debris, resulting in a right leg fracture below the knee.",1
"An employee was removing the access panel to drain cold water from the hot well. As the employee bent over to remove the panel by the two access slots, she became light headed. Upon standing up, one her fingers remained in the access panel and the panel fell to the ground, pulling the employee to the ground with it. The employee sustained a hip fracture.",1
"An employee was hot tapping into an 8-inch natural gas line to reroute the pipe. A spark from the cutting came into contact with condensate within the pipe, ignited, and blew out both ends and where the cut was occurring. The employee sustained burns to the left ear, face, arm, and leg.",1
"A BWS Inspection Services, LLC employee was standing near the worksite waiting to visually inspect the quality of work when completed. Meanwhile, another company was performing a hot tap into a natural gas line. A spark from the hot tap ignited a fire in the line, causing flames to come out of both ends of the pipe. The BWS employee sustained burns.",1
"An employee was climbing onto a fork truck when his head struck the roll-over protection system. The employee then fell to the floor, resulting in an additional head injury. The employee suffered a skull fracture.",1
"An employee was descending a ladder while carrying a box when she missed a step and fell to the floor, resulting in a hip fracture.",1
"An employee was placing trash in a dumpster when the lid came down on their finger, resulting in a fingertip amputation.",0
"An employee was removing T-posts from the ground when he tripped and fell on his left arm, resulting in an elbow fracture that required hospitalization.",1
An employee was getting ready to paper the roof of a new residential home when they fell off the roof and broke a leg. The employee's harness was not secured at the time of the fall.,1
"An employee was helping to unload material from a delivery truck when his left index finger was caught between two pallets, resulting in amputation at the first knuckle.",0
An employee was offloading equipment from a trailer when his thumb was caught between the trailer bed and the main frame. The employee was hospitalized with an injury to his thumb that required surgery.,1
"An employee was manually making special-sized concrete lintels. He was sliding a C-channel lintel mold down the table he was working on. (The C-channel was 8-inches tall by 20-feet long and weighed about 300 pounds.) The C-channel slipped, tilted, and pinched his left ring fingertip, causing an amputation.",0
"A production assembler was clearing a jam beneath a transfer skid steer that was stuck on the conveyor line when the skid steer fell on their left hand, resulting in a partial amputation.",0
"An employee was using a brush to apply lubrication to a tire machine while changing a tire. When the tire began to spin their right index fingertip contacted the machine's duckhead mount, resulting in a partial amputation.",0
An employee set down an air power ratchet during assembly operations when the trigger on the air ratchet activated. The employee went to grab the ratchet when his left glove was caught by the socket. The employee’s glove wrapped around the socket and the tip of his left thumb was amputated.,0
"An employee was preparing to unload a truck to deliver produce when his left index finger was caught between the dock plate and the truck. The employee was taken to the hospital, where his fingertip was amputated.",0
An employee was cutting wood flooring on the table saw when the wood kicked back and the saw amputated his little finger.,0
An employee fell three stories (approximately 21 feet) while putting up plywood on the third floor of a multi-family residential building. The employee sustained clavicle and shoulder fractures.,1
An employee was operating a pallet jack when it struck a forklift. The employee sustained a fractured right tibia and was hospitalized.,1
"An employee was opening and closing a mixer's manual valve to remove clogged salt. The upper discharge door opened and hot liquid (concentrated chicken bouillon) came pouring out onto the employee causing burns to their right arm, leg, and foot.",1
"An employee was reattaching a hose on a forklift when a lever actuated, causing the mast of the forklift to drop down and fracture the employee's arm.",1
"An employee's left hand was caught in a plate roller resulting in injuries to their index, middle, and ring fingers.",1
"An employee was filling balloons with helium in the flower shop when a customer approached to ask a question. The employee then slipped on a plastic balloon weight and fell, sustaining a fractured right femur.",1
"An employee had been making bolt connections on steel. The employee was on the roof of an existing building when they fell through a skylight. They landed 16-18 feet below, impacting the concrete and a table. The employee sustained fractures to their pelvis, sacrum, and leg. Fall protection was not worn at the time.",1
"An employee was opening a hatch on a bulk cement truck when pressure inside of the truck caused the hatch cover to slide off and up, striking the employee. The employee sustained a non-displaced pelvis fracture, a right linear temporal fracture and a subdural hematoma.",1
An employee was using a hand grinder to eliminate discrepancies on columns around the project when the grinder jumped and came out of the employee's hands. They sustained a little finger amputation.,0
"An employee was using a forklift to move a pallet of pet food ingredients from the batch table. The employee noticed something in the chain of the mast of the forklift. While removing the item, the mast dropped and the employee's hand became caught between the chain and sprocket. Two fingers were amputated.",0
An employee was making a cut on a table saw when three of their fingers were amputated.,0
An employee was going on break after operating a multi-purpose compactor. They tripped over a dirt clod and fell against the compactor. The employee sustained a cracked rib and had a seizure resulting in hospitalization.,1
An employee was using a three-step ladder in the back of the warehouse when she lost balance and fell to the floor sustaining a broken left ankle.,1
"An employee was operating a soap bar machine and adding raw materials. While removing clumps of soap, the employee's right index finger contacted a moving blade resulting in an amputation.",0
"An employee was terminating new feeders into a 4,000-amp switch gear. While moving wires that were dangling, one of the wires came in contact with a phase bus that created a ground fault and an arc blast. The employee sustained third-degree burns to the right side of his neck and burns to the right arm and left hand that required surgery.",1
"An employee was opening the milling machine when they began experiencing respiratory issues such as a running rose, coughing, and eye itching from the milling machine vapors. The employee was hospitalized.",1
An employee was walking to deliver cylinders when his right knee gave out. He sustained a torn quadricep on the right knee.,1
"An employee was getting into the driver's side door of a van when she slipped on the seal plate, lost her grip, and fell backward onto the wet pavement. The employee fractured her right femur.",1
"An employee was setting up cribbing to complete an aerial lift track system repair. As he was lowering the jack stand, his hand was caught between an axle and the cribbing, resulting in partial amputation of their left index and left middle fingers at the first joint.",0
A temporary employee was cutting meat with a band saw and amputated a fingertip.,0
"On May 2, 2023, an employee was using a circular saw to cut plywood templates to form concrete. The saw amputated the employee's left index and middle fingers.",0
"An employee walked across a saw and oiled the saw chain. While he was walking back across the saw, his hand contacted the guard. His finger went between the guard and entered the chain resulting in amputation of the fingertip.",0
"An employee was pressure washing a lift station when she fell approximately 20 feet to the ground below. Halfway down, the employee stopped falling until her harness broke. She continued to fall the rest of the way, resulting in two left leg fractures and shoulder pain.",1
An employee was cutting grass using a zero-turn lawn mower. The lawn mower frame snagged a power pole brace wire and pulled down the energized power pole. The employee sustained electrical burns to his left arm and left lower leg.,1
"An employee was standing on a stack of H-beams. While moving three H-beams, a portion of the stack the employee was on shifted, causing his left leg to become trapped and broken by H-beams.",1
"An employee was working on an HVAC machine in a basement. The fan was coming to a stop when his little finger was caught between the belt and pulley, resulting in a soft tissue amputation.",0
"An employee was conducting a fall rescue demonstration. A 165-pound demonstration dummy was released from a height, putting tension on the lanyard. The employee's left hand, little finger, and thumb were caught in the wire rope lanyard, resulting in a medical amputation of the left little finger as well as lacerations to the left thumb.",0
An employee was searching for pieces of a broken ball check valve around the rotating filler valve when the valve closed on their fingertip. Their left index finger was amputated. The machine was guarded at the time.,0
An employee was installing an electrical panel when they fell from a ladder to the floor and broke their right ankle.,1
"An employee was loading a fertilizer cart onto a trailer when he fell off the trailer and landed on the ground, resulting in a fractured right hip.",1
"An employee was adjusting a molder machine when their right ring and little fingers contacted the machine blade, resulting in amputations.",0
An employee was helping to troubleshoot a power interruption at a communications site when they were bitten by a rattlesnake. The employee was hospitalized.,1
An employee was descending a ladder that was propped against a flatbed trailer. The ladder slid against the trailer and kicked out from under him. The employee fell from the second rung from the bottom and struck his head on the concrete.,1
"An employee was using a jack to remove the body from the frame of a truck that was up on a lift. While the employee was removing the body mounts, the jack slipped, and two metal plates on the truck crushed and partially amputated their right index fingertip.",0
"An employee was helping a framing contractor receive wooden truss bundles. When the banding was cut, the trusses fell and broke the employee's right leg.",1
"An employee was holding a stage support beam while co-workers attached it to the stage canopy. The canopy was lowered to approximately 4 feet above the stage. The employee stepped backward and fell off the edge of the stage, landing on the pavement. The employee suffered head trauma and a chest contusion.",1
"An employee was picking up a shipping container from a port. The employee got out of his truck to locate the container for the crane operator when the crane struck him in the leg. The employee's leg was amputated below the knee, just above the ankle.",1
"On May 4, 2023, an employee was cutting a catwalk platform with a torch. When the pressure released, the platform fell back toward the employee and knocked him off his feet. The platform then landed on his leg, resulting in a fracture.",1
"An employee was unloading a trailer and had rolled up carpet in his arm. As he was walking away, the employee tripped on a load net and sustained a rib fracture and punctured kidney that required hospitalization.",1
"An employee was cleaning a molding press at the end of their work shift when the “plunger” came down on their right ring fingertip, resulting in amputation. The machine was not locked out/tagged out at the time.",0
"An employee was on a ladder accessing a warehouse loft. When the employee went to step over the railing, the ladder fell and the employee fell into the safety railing. The employee sustained a sternum fracture.",1
"An employee was assembling a baker-style scaffold. Upon climbing onto the scaffold, the walk board fell through and the employee fell to the concrete floor below, resulting in a fractured left leg or knee.",1
"On May 3, 2023, an employee was holding rigging hooks in position to lift a rebar coil and spool for an automatic rebar bender. The hook slipped in the employee's hand while the sling was being tensioned with a crane. The employee's right index finger was caught in a pinch point between the hook and the tube steel used for lifting the rebar and coil spool assembly. They suffered an amputation to their right index finger.",0
An employee was repairing a light fixture when they fell from the ladder to the floor. The employee was taken to the hospital with blunt force trauma to the body/head.,1
"An employee was walking a student to the bus when the student fell, causing the employee to trip and fall to the ground. They sustained knee and tibia fractures.",1
"An employee tripped over the airline of a burr gun and fell into a torque plate machining cell. The employee suffered lacerations to the head that required stitches and fractures to the right kneecap, multiple ribs, and the T12 vertebra. The employee also sustained facial bruising.",1
"An employee was using a tube mill to remove a scratch from a steel tube. While he was making adjustments, his right hand was caught between the steel forming roll and a steel strip. He suffered an amputation to the little finger.",0
"An employee was on the sidewalk fueling mowers while another employee was being trained on a stand-up, zero turn mower. As the mower was brought to the curb to park, the employee on the sidewalk was struck and his leg was pinched between the curb/sidewalk and the mower deck. The injured employee was hospitalized for a leg fracture above the ankle that required surgery.",1
"An employee had been sweeping on a roof. The employee slipped and fell from the roof to the ground sustaining a brain bleed and fractures to their skull, vertebrae, and right side ribs.",1
"An employee was working when their foot was caught between a walkie and the cooler wall, resulting in a right foot injury.",1
"A security guard was scanning in at a designated location when they were sprayed with mace, causing them to fall to the ground. The individual then began kicking them in the face, resulting in lacerations, contusions, and fractures to the jaw and eye socket.",1
"An employee was assisting another employee with carrying a piece of wood when the injured employee rolled their ankle. He then lost his balance, causing the wood to drop onto his ankle, resulting in tibia and fibula fractures.",1
"An employee was helping to install a blind between a pipe flange and a block valve. The flange needed to be separated in order to remove the gaskets and install new gaskets and the blind. The device that was used to maintain space between the flanges flipped, and the employee's left index fingertip was pinched by the device. The employee sustained a partial amputation and required surgery.",1
"An employee was supporting a wing on a corn harvesting machine when the wing shifted, catching his hands and fingers between the pole and wing frame. The employee sustained fractures, lacerations, and a finger amputation.",1
An employee was stepping down from a pay loader when he fell and struck his head on the floor/ground. The employee was hospitalized for a concussion.,1
"While standing on the curb in front of the store, an employee was struck by a car. The car was then put in reverse and ran over the employee again. The employee sustained fractures to their ribs and both legs.",1
An employee was disposing of a switch when her left thumb was caught and amputated between the equipment and the container. The employee's thumb was surgically reattached.,1
"An employee was sitting on a stool at a desk. As they went to stand up, they tripped over the bottom of the stool and fell. The employee sustained a hip fracture that required hospitalization and surgery.",1
An employee was setting up a centerless grinder when his hand contacted the grinding wheel. The employee was hospitalized for laceration to the right middle and ring finger.,1
"An employee was walking around a production line. They stepped to the side, slipped, and fell sustaining a broken knee.",1
"On May 3, 2023, an employee was visiting a hospital when an active shooter event occurred and the employee was shot.",1
An employee was on an A-frame ladder installing a bird guard for a dryer vent located outside of the facility. The employee fell from the ladder and sustained two broken bones in his lower right leg that required surgery.,1
"An employee was assisting in pouring concrete. The employee was repositioning the tube where the concrete exits when they lost their footing and fell backward to the ground, sustaining a fractured left forearm.",1
"An employee and co-worker were participating in a hands-on alignment training of a device that consisted of an electric drive motor, a belt, pulleys, a chain, and sprockets. The employee finished checking the tension and alignment on the training aid and prepared to energize the device’s motor to spin the chain and check their work. The device activated causing the injured employee’s right ring finger to become caught between the chain and sprocket. The employee suffered a fingertip injury resulting in amputation down to the first joint.",0
"An employee entered a blow molding machine to make process adjustments when the machine closed on the employee, resulting in broken ribs and a collapsed lung.",1
"An employee was working on a mold on a work bench. They attached an angle plate to stabilize the mold and started to hoist the mold to move it to the floor. The employee was holding onto the angle plate with their left hand when the bolt that was holding the mold failed, causing the angle plate to fall onto the employee's left little finger. The employee sustained a fingertip amputation.",0
"An employee was directing a forklift operator when the forklift ran over the employee's right foot, resulting in an amputation.",0
"An employee was using a power drill when their gloved finger was caught in the drill bit, resulting in a finger tissue avulsion.",1
An employee was walking through the hallway of a plant when they fell to the floor and fractured hip.,1
"An employee was standing on a demo cart, handling food samples when they fell against the railing. The employee sustained a punctured lung and broken ribs that required hospitalization.",1
An employee was walking to the peak of the roof to install a fall protection anchor when he slipped off the roof to the gravel below. The employee sustained a left ankle fracture and a left little finger dislocation.,1
"An employee was working on a pellet extruder machine that had a dry ice blockage that needed to be removed. As the employee removed the die head, a buildup of carbon dioxide gas under pressure propelled the 5/8-inch die into the employee. They sustained lacerations to the face, fractures of the nose, jaw, and eye socket, as well as internal head trauma.",1
"An employee was moving a grease caddy transport container in the back room when they slipped and fell, resulting in a femur fracture.",1
An employee was in a boom lift when the vehicle struck a hole then stopped abruptly. The impact ejected the employee and his fall protection pulled him back into the basket. The employee possibly struck the basket and was hospitalized for a leg fracture that required surgery.,1
"An employee was underneath a construction loader truck while working on it. As the employee got up, they struck their head on the frame of the truck and were hospitalized overnight for a concussion.",1
An employee was shearing down a metal plate using an ironworker machine when his left middle finger was amputated below the fingernail.,0
Employees were taking apart a trench box using an excavator when a spreader bar fell onto an employee’s right foot. The employee suffered injuries to their foot requiring surgery.,1
"An employee was chipping dried concrete off of his concrete truck when he was caught between a bracket and moving machinery, resulting in a left index finger laceration.",1
An employee was pouring a copper food additive into a bucket when the product splashed into his eyes and face. The employee also inhaled and ingested the substance. The employee suffered copper poisoning.,1
"An employee was manually transferring boxes of freight from a pallet on the floor to a stock cart. While bending down to grab the freight, the employee was positioned with one foot on the pallet and the other foot on the floor. The employee then stood up and stepped off the pallet, lost balance and fell backward to the floor, fracturing their right hip.",1
An employee was unloading a trailer using a forklift. The trailer pulled away from the dock and the forklift fell from the dock to the ground. The employee sustained a broken left arm.,1
"An employee was moving a steel beam when their right hand was crushed by the beam, resulting in partial amputation of their ring finger.",0
"An employee was removing/unjamming sheets from an ironer when their fingers became caught in the machine, resulting in a right-hand fingertip amputation.",0
"An employee went to sit on a chair and fell backward, striking her head and back. The employee sustained a broken back.",1
"An employee was masking glass to prepare a semi-truck for painting. While stepping over the engine compartment, the employee stepped on the rubber fender well trim and fell approximately 6 feet to the floor, resulting in a contusion on the back of his head.",1
"A temporary employee was training on a gangway crane when the equipment collapsed, causing the employee to fall to the ground. They sustained finger and rib fractures as well as a dislocated knee.",1
"A crew was pinning an expanded metal walkway to the side of a shipping container during rigging operations. A forklift was being used to hold the walkway up against the side of the shipping container but needed to be repositioned. While doing so, the walkway fell on top of the injured employee and they sustained right ankle and clavicle fractures.",1
"An employee was riding an electric bicycle to get from one production site to another when they tripped and fell, resulting in head trauma.",1
"An employee was removing an old HVAC duct while standing on an A-frame ladder. The duct came loose and struck the ladder, causing the employee to fall to the concrete floor. The employee sustained fractured discs in their back.",1
"An employee was hooking and unhooking supersacks when his hand was caught in the mast of a forklift, resulting in a fingertip amputation.",0
"An employee was on the frame of a concrete casting machine as it traveled down the tracks. His left foot got caught between the rail, the machine frame, and the operator's platform, resulting in a crush injury.",1
"An employee was assisting in the replacement of a power pole when they tripped and fell, striking a ground rod. The employee sustained a right hip injury that required surgery.",1
"An employee and a co-worker were moving a container onto a loader using a transport dolly when the employee's left index finger was pinched between the container and a lock, resulting in amputation.",0
"An employee was picking up a glove from the ground. A truck outrigger came down on the employee's left foot as it was being lowered, crushing and fracturing the foot.",1
"An employee was removing a plastic blow mold when the machine activated, crushing his fingers.",1
"A maintenance technician was assessing damage to an overhead door that had been hit by an exiting truck. The metal pole of the roll up door fell onto the maintenance technician's head, causing head trauma.",1
"An employee fell from a rolling scaffold to the ground, resulting in a fractured fibula.",1
An employee was on a 24-foot extension ladder working to install refrigeration panels and trim. The  employee slipped on a step and fell 12-15 feet to the floor. The employee sustained a skull fracture.,1
"An employee was descending the stairs when they missed the last three steps and fell to the landing, sustaining a right femur fracture that required hospitalization.",1
"An employee was lifting a dock plate when it fell onto his right middle finger, resulting in a fingertip amputation.",0
"An employee was feeding a board into an automatic nailing machine. The employee attempted to reposition the board when a 2-inch nail punctured their finger, resulting in a broken finger. The machine was not guarded at the time of the incident.",1
"An employee was in the parking lot moving a trailer with a forklift when the trailer popped off and started to roll away. The employee stopped the forklift, got out, and went to stop the trailer when he tripped over the forks of the forklift and fell, resulting in a femur fracture.",1
"An employee was descending a ladder after grabbing product off a shelf and handing it to a co-worker. The employee missed three steps and fell from the ladder, resulting in a tibial plateau fracture.",1
An employee was using an overhead crane to store rolls of aluminum sheet metal in the facility when they were struck by the moving load and pinned against stationary material. The employee sustained internal bruising to the torso and upper legs.,1
An employee was operating a vehicle when they began to experience signs of heat exhaustion.,1
An employee was using a chainsaw to cut a stump down when the chainsaw struck their upper right thigh. The employee sustained a laceration that reached the bone.,1
An employee was sweeping around a machine and went to clear debris from a guillotine machine when the machine came down and amputated their little fingertip.,0
"An employee was walking when he slipped on water and chemicals on the floor and sustained chemical burns to his leg, arm, and back.",1
"An employee was working when a steel coil fell from a nearby forklift, crushing their left foot. The employee's foot was medically amputated.",1
"On May 5, 2023, at 6:00 a.m., an employee parked and exited his vehicle. He stepped over a water hose that was laying on the surface of the parking lot. As he stepped over the hose, he lost his balance and tried not to fall, suffering a torn tendon in his right hip requiring hospitalization.",1
"An employee was clearing rubber that was stuck in a machine when the machine activated, lacerating the employee's left middle finger. The fingertip to the first knuckle was then medically amputated. The machine was unguarded at the time.",1
"An employee was performing maintenance on a bucket truck when his right hand became caught in some rope, causing amputations to three fingers down to the first knuckle.",0
"An employee was moving I-beams into position so that holes could be drilled into the I-beam using a magnetic drill head. While operating the magnetic drill press, the employee’s left, gloved thumb was caught by the drill bit, which then pulled the employee’s sweatshirt and hair into the machine. The employee suffered a broken left forearm that required hospitalization and surgery.",1
"An employee fell 13 feet from a roof to the ground, sustaining a leg fracture.",1
"An employee was transferring a batch of sodium hydroxide and potassium hydroxide into a holding tank using an air pump to pressurize the tank. After the transfer, the pressurized line/pump doused the employee with the chemicals, resulting in burns to the eyes, mouth, and abdomen.",1
"An employee was operating the ham skinner when their right hand came in contact with it, resulting in removal of skin and fatty tissue on the top of the right hand.",1
"An employee was climbing a roof slope to install a fall protection anchor when they slipped and fell to the ground, resulting in an ankle fracture.",1
An employee was dismantling a scaffold when he slipped and fell off the scaffold. The scaffold he was tied to then also fell. The employee landed on the ground 25-35 feet below and sustained multiple fractures.,1
An employee was on a service ladder performing electrical work on the second floor when he fell approximately 12 feet off the ladder to the concrete floor below. The employee landed feet-first and sustained ankle fractures.,1
An employee was riding an all-terrain vehicle (ATV) while conducting law enforcement activities when the vehicle struck a berm. The employee was ejected from the ATV and sustained a compound fracture to the left arm.,1
An employee was taping an opening where a window was to be installed when they slipped and fell out of the window opening approximately 10 feet to the ground below. The employee suffered injuries to their L2 and T12 discs.,1
"An employee was working on a panel in an electrical closet of a residential building. An arc flash occurred and the employee sustained second and third-degree burns to the face, left biceps, forearm, and hand.",1
"Two employees were rebuilding the hydraulic system for a 14,000-pound forklift. They were removing the hydraulic hose when the hydraulics lost pressure, causing the bucket of the forklift to drop down onto the employees. One employee suffered broken arms and legs, as well as head injuries.",1
An employee was setting up wheel chocks on the tire of an aircraft. The vehicle that was going to be used to load catered food onto the aircraft deployed its stabilizing outriggers. The outriggers crushed the first digit of the little toe on the employee's left foot.,1
An employee was cutting a thick metal plate using a handheld torch when they began experiencing symptoms of heat exhaustion. The employee was hospitalized.,1
An employee dropped a bolt which then went into a small hole. The employee reached down to retrieve the bolt and was bitten by an Eastern cottonmouth snake. The employee was hospitalized.,1
An employee was walking upstairs to a patient's apartment when they missed a step and fell to the concrete floor. The employee sustained rib fractures.,1
"An employee was changing a hose to a different box car when he slipped and landed on his hand. His finger was then caught between the hose and coupling, resulting in a crush injury to the left middle finger.",1
"An employee was standing on the second rung from the bottom of a 6-foot ladder to tighten a bolt on a die cast machine. The employee lost his balance and fell to the ground, sustaining a fractured left wrist.",1
"Employees were evacuated due to a false alarm. As an employee was waiting to return to the building, they took a step back and tripped over a parking block. The employee fell and sustained a right arm abrasion and hip fracture.",1
An employee was blowing out bread crumbs and wiping off the ledges of the band slicer machine and amputated a fingertip on their right hand.,0
"An employee was removing a sauce pan from a stove burner when a water and sugar mixture spilled onto their hand, resulting in burns.",1
"An employee was vacuuming when they tripped over the vacuum cord and fell to the floor, resulting in a fractured shoulder, pelvis, and wrist.",1
An employee was on an A-frame ladder cleaning and dusting fixtures when they fell from the second or third rung from the bottom to the floor and sustained a left ankle fracture.,1
"An employee was walking when they slipped and fell to the ground, resulting in a hip/pelvic fracture.",1
An employee was helping thread a forming line for specialty paper when her arm was caught in the roller. The employee sustained a compound fracture to the right arm.,1
"An employee was dismantling a tower crane. As the employee disconnected a cable from the bottom, it shorted out and the employee sustained burns to both hands.",1
An employee was stepping out of his work van when he lost his footing and sustained a quadricep tendon rupture.,1
"An employee was in a dozer building a stockpile when the dozer slid approximately 6 feet off the stockpile. The employee's face struck the control panel, resulting in a nose laceration.",1
An employee was being trained on how to cut ribeye meat on a band saw. The ribeye slipped and pulled the employee's finger into the saw blade resulting in amputation of their right index fingertip.,0
An employee was stabbed by a customer and sustained stab wounds.,1
"An employee was stripping/removing a metal form from a girder when they were struck by the metal form, resulting in a left tibia and fibula fracture.",1
"An employee slipped and fell while walking down a stairway. Hitting the stairs and the ground, the employee suffered broken ribs, cuts on the elbows, and bruising.",1
An employee was hospitalized after his hand was caught in the rollers of a glue applicator in the manufacturing area of the facility. The employee's hand was crushed and he sustained a fractured thumb.,1
"An employee was forming a deck on an elevated platform when a gear malfunctioned. The employee fell 6 feet onto a set of stairs, fracturing their right ankle.",1
An employee developed a blood clot in the leg while driving a work vehicle. The employee was hospitalized.,1
An employee was moving a part from a shaker table to a grinder when their left ring finger was caught between the part and the rotating grinder wheel resulting in amputation of the finger.,0
An employee was walking into an elevator when they fell and fractured their femur.,1
"An employee was holding onto a section on a sharp metal edge when it pinched their finger between the frame and the piece they were trying to remove. As they were sliding it down the support frame to move onto the dollies, it got caught on the frame. Their little finger was amputated about halfway between the second and third knuckle.",1
An employee was standing next to a lowboy trailer while a backhoe was being unloaded. The backhoe slid off the trailer and pinned the employee between it and a roll-off dumpster. The employee was hospitalized for four right rib fractures.,1
"On May 8, 2023, an employee was standing on a ladder looking for a leak when they fell onto the ground, resulting in an injury to the left side of the body.",1
"An employee was disconnecting a rototiller from a mobile crane. While attaching the come along, the crane rolled back and crushed the employee's hand. The employee sustained a severe laceration to the thumb.",1
An employee was moving material on a flat roof when they fell through a hole created by a removed sheeting panel. The employee landed on the concrete floor and sustained skull fractures.,1
An employee exited a vehicle. The vehicle then started rolling backward downhill. The employee went to re-enter the vehicle but was knocked down by the door. His left ankle was struck by a tire and fractured.,1
An employee was waiting to offload a steel bar following a filament strand on a winder machine. His right index finger contacted the rotating section of the machine and was amputated above the knuckle. The injury required surgery.,0
An employee was completing a 1.5-mile run when they were hospitalized for weakness and mobility difficulties.,1
"An employee was leaning against a paver while talking with crew members when electricity jumped from the power lines to the paver, shocking the employee. The employee sustained electrical burns to multiple parts of the body.",1
"A construction employee was working in a barricaded work zone, unloading a work truck, when a pickup truck crashed through the construction fence and struck the employee. The employee was pinned to a nearby semi-trailer and sustained a right lower leg amputation, left knee fracture, internal bleeding, and damage to the kidney and pancreas.",0
"An employee was welding a lift-arm fixture part that was 6 feet tall, 8 feet wide and weighed approximately 678 pounds. As the employee went to move the fixture from horizontal to vertical, the part fell out. The employee sustained an upper back injury.",1
An employee was opening the cattle gate to the tub. His hand was on the latch and was waiting for the cattle to come in when the gate closed on the employee's thumb. The distal portion of the thumb was amputated.,0
"An employee was using a chain hoist to remove timbers used to create a void in sand molds. The employee's hand was at the base of the chain hoist hook when their ring finger was caught in a pinch point, resulting in a partial amputation.",0
"On May 8, 2023, an employee was driving a baggage loading tractor (tug) when the tug struck a set of chocks and the employee was thrown to the ground. The employee suffered head injuries.",1
"An employee was loading flowers into a funeral home vehicle when they tripped and fell, striking their face on the retaining wall of a flower bed. The employee sustained a facial injury and lost an eye.",0
An employee was installing metal roofing on a building that was being constructed when they fell 13.4 feet to the ground and sustained a back injury requiring hospitalization.,1
An employee was rewebbing a machine when their right little finger was caught in a nip roller and amputated. The machine was not locked out at the time.,0
"Two employees were completing a post-job inspection of a centrifuge. One employee rotated the centrifuge rotating assembly to test if it could be turned by hand. The injured employee went to stop the rotating assembly when their left little finger was caught between the belt and pulley system. The employee sustained an open, non-displaced distal phalanx fracture and a fingertip amputation to the left little finger.",0
"An employee was ascending a 28-foot extension ladder to work on a cable wire. The employee fell backward approximately 10 feet onto the concrete sidewalk, resulting in a left elbow fracture.",1
"An employee was loading and unloading tires from the back of a pickup truck when they slipped and fell, striking the back of their head on the forklift. They sustained a skull fracture.",1
An employee was using a utility knife to remove a spray painter hose from a railing that was attached with tape. The employee cut the tape and the hose was also cut in the process. He went to grab the hose when the pressure in the hose caused paint to be injected into the employee's thumb.,1
"An employee was cutting two metal valves using an alligator shear when the part he was cutting rolled over his hand, causing his right index finger to contact the blade. The employee sustained a partial amputation below the nail.",0
An employee was on a portable ladder installing metal sheathing when they fell approximately 5 feet. The employee sustained a right leg fracture that required hospitalization.,1
"An employee was lowering the tailgate of a truck used to transport mulch. As the employee lowered the tailgate, his fingers were caught in a pinch point, resulting in an amputation that required surgery.",1
An employee was raising a lift when it tipped over and caused the employee to fall on top of debris that was on the floor. The employee suffered a puncture wound on the buttocks and a lacerated knee.,1
"An employee was switching out a motor during a repair service when the motor fell onto the employee's hand, resulting in a fracture and amputation to a finger.",0
"An employee was pulling a handcart with product on it while unloading a trailer. While on the elevated liftgate, the cart ran over his foot, causing him to fall 4 feet from the liftgate to the ground. The employee sustained a rib and collarbone fracture, as well as a punctured lung.",1
"An employee was stocking shelves when a glass bottle fell. The employee went to catch it and the glass broke, resulting in a severe laceration to the employee's left hand.",1
"An employee was drinking water when the cap came off and became lodged in their throat, requiring hospitalization.",1
An employee opened the door to a cutting machine in order to load more meat into the machine. The employee noticed a piece of meat stuck in the machine and went to clear it when the machine blade contacted their left middle finger. The finger was amputated at the first joint.,0
An employee was running cable underground through hand holes when they began feeling sick and breathing heavy. The employee was hospitalized for dehydration/heat illness.,1
"An employee was cleaning off metal flakes from a broaching machine/metal shaver when the machine activated and the blade cycled. The machine contacted the employee's finger, resulting in a fingertip amputation.",0
An employee was opening a loading dock door when they stepped on a lower roller and fell to the lower working surface. The employee sustained multiple facial fractures.,1
"An employee was using an electric pallet jack to move hand holes out of a delivery truck. One of the straps securing the double stacked hand holes broke, causing the top half of the stack to fall. The employee fell 3-4 feet off the delivery truck lift gate, resulting in a lower back fracture and brain hemorrhaging.",1
"An employee had just completed a visual inspection of a dust collection system. As he turned to leave the area, he stumbled and reached out to catch himself. His arm then landed near the outfeed roller conveyor of the planer machine. The employee sustained a laceration to his right forearm with the skin pulled back that required stitches and a skin graft. The employee also sustained a forehead laceration.",1
An employee was operating an upcut saw and amputated two fingers on his right hand.,0
An employee was walking back to his work area after dumping a trash can into a hopper when a forklift backed up onto the employee's left foot and fractured it.,1
An employee was inspecting equipment when his right index fingertip was amputated by the machine.,0
An employee was loading parts into a punch press machine when the arm of the chair struck the machine and activated it. The employee sustained three left-hand finger fractures.,1
"An employee was operating a coil-winding machine when the mandrel and coil shoe came out of the machine and struck them in the leg, resulting in multiple fractures below the knee.",1
"An employee was moving tools and equipment from a 16-ton steel track excavator to co-workers at the work area on site. The employee was walking toward the excavator when he fell. The excavator backed up and ran over his legs, resulting in multiple breaks in his left femur, tissue damage to the left ankle and left foot, and one broken toe on left foot, as well as multiple fractures and tissue damage in the right foot.",1
"An employee was unloading a utility pole between two trailers when a second truck pulled forward. The truck hit a crossarm which then knocked the employee to the ground and the crossarm fell onto him. The trailer then ran over the crossarm, breaking the employee's ankles.",1
"An employee was mowing grass on a zero turn riding lawn mower when the mower lost traction on the wet, grassy hill. The lawn mower impacted an elevated concrete structure, pinning the employee's legs between the structure and the lawn mower. They sustained a tibia fracture.",1
An employee was using an angle grinder on a metal pin when the cutting wheel broke. The employee was struck by shrapnel.,1
An employee was conducting a routine mixture test in the lab when they sustained liquid asphalt burns to their right arm.,1
"On May 9, 2023, an employee was assisting another employee with turning a large crate that had fallen off a forklift. The crate struck the employee's leg, resulting in a contusion that required hospitalization.",1
Employees were driving a work truck and collecting trash. A trash bag that contained pool chemicals was placed in the hopper and began smoking. The employees drove to the nearest open parking lot and extracted the trash bag from the hopper when the injured employee inhaled some of the  smoke. The employee was hospitalized for breathing complications and elevated vital signs.,1
"An employee was framing a residential building under construction when they fell to the ground, resulting in head and wrist injuries.",1
"An employee was in a truck waiting for an intermodal container to be discharged off a ship and loaded onto the truck. The employee noticed a military vehicle armored window and frame on top of the container. The employee went to catch the object while it slide off the container; he fell backward from ground level and struck his head on the ground, sustaining a skull laceration and injury to the first cervical vertebra.",1
"An employee was working in the filling room, filling shampoo bottles, when the automatic filler became jammed with a bottle. As the employee went to fix it, the feeder belt grabbed her hand and amputated two fingertips. The machine was unguarded at the time.",1
An employee was walking on a cement driveway to a worksite when they stepped backward into a hole where the cement was broken. The employee fell and suffered a broken lower right leg.,1
"An employee was holding two drinks while walking. The employee slipped on a piece of ice and fell to the floor. The employee was hospitalized with a left patella injury, that required surgery.",1
An employee was attempting to free a stuck paddle on a molasses mixing machine when the machine energized and fractured the employee's lower leg.,1
"An employee was on the dry end elevator of the pulp dryer, feeding a sheet of cellulose into the pull rolls when their fingers were pulled into the rolls. The employee's middle finger was amputated to the first joint and they suffered a left index finger avulsion.",0
An employee was feeding a 12-foot brass bar into a multi-spindle screw machine and moving a lever to release the pusher when his thumb became caught in the machine. The employee's left thumb was partially amputated.,0
"An employee was working on a trackhoe and as he attempted to realign a belt in an air curtain, his glove became stuck on the belt. The employee's hand was pulled in, resulting in a right thumb amputation.",0
"An employee was operating a tugger truck. While backing up and turning, the employee's ankle/shin became pinned between a guardrail and the vehicle. The employee sustained a right leg fracture.",1
"An employee was in the parking lot while on break when his car door closed on his left index finger, resulting in a fingertip amputation.",1
"An employee was operating a bearing press when their hand was caught in the press, resulting in a left index fingertip amputation.",1
An employee was unjamming product from a casings machine when he contacted the chain and sprocket; his left middle finger was partially amputated. ,0
An employee was troubleshooting an issue with an incline conveyor track when his left index finger contacted a moving chain. The left index finger was amputated at the bottom of the nailbed. The machine was unguarded at the time.,0
An employee was on a roof while running communication cables between HVAC units when they fell off the roof and suffered a broken foot.,1
"An employee was unloading a 15-foot-long section of tube steel from a roller bed onto the floor. As she pivoted the piece to allow the opposite end of the piece to set down on the floor, the far end rolled off the bed and struck the floor. The tube then bounced up, causing her left hand to become caught between the tube steel and the side of the roller bed. Her left little fingertip was amputated.",0
"On May 10, 2023, an employee was working at a water station when his left leg went into a pit of hot water that was approximately 160 degrees Fahrenheit. The employee sustained second and third-degree burns to the left foot, ankle, and part of the lower left leg.",1
"Two employees were involved in an altercation at a client location. One employee was attempting to enter a moving vehicle while the other employee was operating the vehicle. While the injured employee went to open the passenger side door, they fell and struck their head on the ground, resulting in a head injury. The employee was hospitalized.",1
An employee was operating a packaging machine when three right-hand fingertips were amputated.,1
An employee sustained a right index fingertip amputation from a rotating plastic auger on the dough pump line.,0
"An employee was testing soil conditions at a job site using a dynamic cone penetrometer (DCP). The DCP weight was raised, then released while the employee's hand was on the test plate. The employee's right index finger was amputated.",0
An employee was repositioning a 24-inch-by-52.5-inch-pipe by hand when it slipped from the burn bed discharge rails. The employee was hospitalized for a right ring and little finger laceration and fracture that required surgery.,1
An employee was nailing a lath to set a truss when the nails came loose and the truss fell onto the employee. The employee sustained fractures to the wrist and knee as well as a head laceration.,1
"An employee was assembling a pump when the seal ring broke, causing the pump sleeve to slip and fall onto the employee's left hand fingers, resulting in the amputation of their index finger.",1
"An employee was standing on a 13-foot-high plank while installing shoring for building an apartment complex. The employee was tied off to the plank that he was removing. The plank dropped to the ground, pulling the employee down 13 feet. He sustained fractures to his upper leg, pelvis, and three right-side ribs as well as a sore right shoulder.",1
"On May 10, 2023, an employee was unclogging the glaze pump machine when his right index fingertip was amputated. The machine was energized at the time.",0
"An employee was brushing out metal shavings from the slug slot when one of the spring-actuated hold-downs on a metal deck cutoff die was stuck in the up position. The die was removed from the press and the employee brushed away metal shavings. The employee's left hand was on the die while another employee began loosening a bolt on top of the die. The hold-down that was stuck then broke loose, crushing portions of his index, middle, ring, and little fingers on his left hand that required surgical amputation.",0
"Employees were installing goal posts for an overhead power line crossing. While installing a PVC pipe with guide wire attached to the top, the pipe made contact with the overhead electrical line and energized the guide wire, shocking one of the employees. The employee was knocked to the ground and sustained burns to the hand and foot, requiring hospitalization.",1
An employee was unloading trucks and building/wrapping pallets for shipment when their right hand was caught between the wood and freight on a forklift. The employee's right ring finger was partially amputated.,1
An employee sustained a fractured left arm when the forklift he was operating rolled over.,1
"An employee was assisting with the movement of a plate compactor using an excavator with a strap connected to the bucket. The excavator bucket fell off and the plate compactor struck the employee, resulting in a broken left femur and foot.",1
"An employee and a co-worker were loading a 4-foot-tall piece of high-pressure iron pipe into a line truck. When the employee was setting down the pipe, his right middle finger was caught between the hammer union wing and another piece of high-pressure iron pipe, resulting in a finger amputation.",0
"An employee was pushing a cleaning cart when the cart broke, causing the employee to fall to the ground and sustain a right knee dislocation.",1
An employee was in a bucket truck drilling a hole into a utility pole when a conductor located above the employee broke free from the pole and fell onto the equipment. The employee suffered second-degree burns to the right side of their face.,1
"On May 10, 2023, at 12:00 PM, an employee was on top of a blast cabinet and went to step over the paint line conveyor to check shot levels. The employee slipped and their ankle was caught between the track and carrier on the paint line trolley/conveyor chain. They sustained a fracture and laceration/puncture to the left ankle that required hospitalization.",1
An employee was roll grooving an 8-inch diameter pipe when their glove was caught in the grooving wheels. The employee's fingertip was amputated.,0
"An employee was using an overhead crane to dump blasting media in a 55-gallon drum into a dumpster. The chain slipped and a pinch point was created between it and the drum. The employee's thumb was caught, resulting in a right thumb tip amputation.",0
"An employee was working on top of a pipe, cutting out a section when the pipe buckled, causing the employee to fall 5 feet. The employee sustained a humerus fracture.",1
An employee was dismounting a tug when they fell to the ground and sustained a knee fracture.,1
"An employee was performing maintenance on broadcasting cables when their hand was caught in the pulley and rigging block, resulting in a right ring finger amputation.",1
An employee was operating the controls of a rear-load garbage truck when their left hand was caught in the compactor. The employee sustained a left hand crush injury and a possible avulsion.,1
"An employee was on the eleventh rung of a 28-foot extendable ladder when they fell 11 feet to the concrete floor. The employee sustained spinal vertebral fractures, a spinal cord injury, and nerve damage to the intestines.",1
"An employee was guiding a plate down with a crane operator when his hand became caught between the top plate and the base of the machine, resulting in a soft tissue amputation of the right little finger.",0
"An employee was clearing a plug from a centrifuge grease pump using steam. The steam heated the grease and caused it to overflow from the tank and spill over onto the employee, resulting in burns.",1
An employee was moving equipment when it fell and struck the employee's leg. They were hospitalized.,1
An employee was walking down stairs when they lost their balance and jumped three feet to the ground. The employee sustained two ankle fractures.,1
"An employee was working in the loading dock area and using a 2x4 to pry a stuck pallet off a forklift. The 2x4 broke and the employee was thrown/pushed back onto the semi-trailer floor, resulting in a left hip fracture.",1
"An employee tripped and fell, resulting in a broken jaw.",1
"On May 11, 2023, at 8:15 PM, an employee was unloading a railcar. The car had been steamed and the top was vented. The employee connected the unload hose to the bottom of the car and when the railcar valve was opened to begin the unload process, pressure from the unload piping surged back into the railcar. This caused 200-degree F oil to spill out of the top of the railcar, contacting the employee.",1
"An employee was performing an undercut on a felled poplar tree to clear land for a new power line. The tree released tension and splintered, striking the employee in the leg. The employee sustained a left tibia fracture just below the knee.",1
An employee had mopped the kitchen floor and put out a wet floor sign. He was walking to clock out when he slipped and fell on the floor. The employee sustained a fractured hip and required surgery.,1
"An employee was using a wheel cutter to cut rebar. The employee's glove was caught in the feed of the cutter, resulting in amputations to their left little and ring fingers.",0
"On May 11, 2023, an employee was adjusting the torque settings on a capper on a line. The employee dropped a tool and as they went to reach for it, their finger struck the top belt drive in the machine. The employee's right ring finger was partially amputated.",0
An employee was exposed to carbon monoxide from a forklift and began to feel lightheaded. The employee was later was found unresponsive in the booth and was hospitalized.,1
An employee was installing electrical pole components when they experienced an electrical shock and burns to the abdomen. The employee was hospitalized.,1
"An employee was retrieving a container of bread from the cooler when they stepped on a container, causing them to slip and fall. The employee sustained a separated knee cap.",1
"An employee was leaving a customer's yard when they heard a dog bark. As they began to walk away faster, they tripped on a garden hose and sustained a leg fracture that required surgery.",1
"An employee was assisting customers at the register and restocking shelves, when she started feeling ill. She was taken to the hospital and treated for heat stroke.",1
An employee was clearing a jam on a fabric cutting machine when their right index fingertip was amputated. The machine was guarded and energized at the time.,0
An employee was picking up short boards that had fallen off the rotating roundtable to place back on the table when her finger was pinched between a board and the bottom of the table. The right index finger was amputated to the first knuckle.,0
"An employee was helping a customer load a truck onto a trailer when the snow plow fell off the truck and onto his foot, resulting in a crushed toe. The employee was hospitalized.",1
"An employee was tightening a leaking tri-clover clamp on the pressure relief valve that directs the clean-in-place solution. The relief valve came off and 155-degree F hot caustic solution came out of the opening and struck the employee on the abdomen, resulting in thermal burns.",1
An employee was climbing a ladder to access a roof to staple house wrap. The employee fell from the ladder and struck his head on the composite deck below.,1
An employee was moving a basket of plates when their left thumb was caught between the basket and the curing oven. The thumb tip was amputated.,1
An employee was driving an electric pallet jack toward the receiving department when the vehicle drove over a piece of cardboard. The vehicle then struck a pallet of wine and the employee's foot was wedged between the pallet and the electric pallet jack. The employee sustained a partial right heel avulsion.,1
"On May 12, 2023, an employee was repairing a wood chipper. They were using a come-along to turn the drum to clean out the wood debris with a blower. The employee's foot was caught and crushed by the drum and duct inside the wood chipper. The employee suffered amputations to two toes and was hospitalized.",1
"An employee was rolling a bundle of plywood onto a router when the bundle moved backward and his right hand was caught between the bundle and a roller on the router, resulting in an amputation of the middle fingertip without bone loss.",0
An employee was walking down the stairs when they missed the last step and fell. The employee sustained a left ankle fracture that required surgery and hospitalization.,1
"An employee was adjusting a sheet of metal to bend on a hydraulic bender when the machine pinched his right middle finger, resulting in a fingertip amputation down to the base of the nail.",0
"On May 12, 2023, at 7:33 AM, an employee was hooking a crane hook to an I-beam when his ring finger was caught between the hook and the flange of the beam, resulting in amputation.",0
"An employee was dropping off his trailer after arriving at the terminal. As they were removing a dolly from the rear of the dual trailer set, their hand was crushed in a pinch point between the converter dolly and the back of the lead trailer. The employee sustained fractures to the left hand.",1
An employee was on a three-step ladder retrieving an item for a customer when she missed a step while descending the ladder. The employee fell on the floor and sustained a fractured pelvis. The employee was hospitalized.,1
An employee was performing maintenance inside a furnace when they lost consciousness due to the oxygen-deficient atmosphere. The employee was hoisted from the space and also sustained a leg fracture.,1
"An employee was operating a forklift to move garbage. As they stepped off the forklift, the employee slipped/fell. The forklift then ran over the employee's leg, resulting in a leg fracture.",1
"A temporary employee was pushing a skid of metal on a cart on a slope. As they went to slow the cart, their finger was caught, resulting in amputation to their finger pad.",0
"An employee was aligning holes for an air cylinder when it shifted, creating a pinch point. The employee's left middle fingertip was amputated.",0
"An employee tripped on an uneven piece of concrete in a parking lot, fell, and suffered a broken pelvis.",1
Two employees were working to connect a lawn tractor to a pull-behind aerator. The tractor and aerator were hooked-up/hitched together. The injured employee noticed a cotter pin needed to be attached and stepped between the tractor and aerator hitch area. The other employee started the tractor when it moved forward a foot and a half and made contact with the injured employee's ankle. The injured employee sustained a right ankle fracture that required surgery.,1
"An employee was exchanging a bottle of acetylene when they fell through a plywood-covered hole. The acetylene bottle fell and landed on the employee's hand, resulting in amputation.",1
"An employee was removing feed from a grain trailer. After unclogging feed in the cone of the feed silo, the employee was getting up off the ground. His right hand was braced on the concrete and as he raised his body, the right hand slipped. His left index finger was caught in the auger, resulting in amputation.",0
An employee was carrying supplies on a roof when they fell 25 feet through a skylight to the ground below. The employee sustained fractures to the left leg and eye socket.,1
An employee was cutting chicken with a knife and amputated her left ring finger.,1
An employee was changing out a lathe knife when it slipped out of his hands and struck his right shin. The employee sustained a laceration and tibia fracture.,1
"An employee and a co-worker were carrying a sleeper sofa down the ramp of moving truck when the employee lost his grip on the sofa and it fell. The metal bars from the base of the sofa caught the employee's foot, causing the employee to lose his balance and fall off the ramp. The employee suffered a broken ankle.",1
An employee was wiping sand piles off the grate of a pump machine when his right hand slipped and his middle and ring fingers entered the grate. The employee suffered amputation of the middle fingertip as well as a severed ring finger that was reattached.,0
An employee was cutting a piece on the finishing saw. They went to grab scraps left after cutting and lacerated their right palm. The employee was hospitalized,1
"An employee had finished putting the register drawers and deposit bag into the safe. While closing the safe, her left ring finger was caught in the safe door. The tip of her finger was amputated.",0
An employee was stocking items in the garden center. He picked up an outdoor rug and went to put it in the shopping cart when he lost his balance and fell backward. The employee struck the back of his head on the shopping cart and was hospitalized for a head injury.,1
"An employee was going from the checkout area to the kitchen when they tripped over a customer and fell, resulting in a patella fracture.",1
"A temporary employee was working behind a production line in a kitchen when a steam kettle tipped and dumped boiling water on them, resulting in burns to their legs and feet.",1
An employee was lifting a 5-pound box of crab legs onto a table when she tripped and fell backward onto the floor. The employee sustained a hip fracture.,1
"An employee was stepping into a sunken living room at a client's house and fell down the steps, resulting in multiple fractures in their left ankle, right shoulder, and right knee.",1
An employee was taking pictures of a trailer when they were struck by a forklift and sustained an ankle fracture.,1
"An employee was returning an item to the back room when they tripped and fell to the floor, resulting in a hip fracture that required hospitalization.",1
"An employee was helping prepare a product in the deli department of a supermarket. The employee walked near a sink while carrying a tray in her hands, slipped on a wet spot on the floor and fell. The employee suffered a fractured right femur.",1
An employee was installing a tilt cylinder on a lift truck at a customer's site. He was using a pry bar to align a pin when the pry bar slipped. His left middle fingertip was caught and amputated in a pinch point.,0
"An employee was making adjustments on the line when the bend press machine activated, resulting in a fingertip amputation.",0
"An employee was pushing a load when it fell, resulting in amputation of his right middle fingertip.",0
"An employee was unloading materials from a truck. A base plate cart became wedged on the truck/lift gate, and the cart shifted and pinned the employee's left thumb. The employee was taken to the hospital, where his left thumb tip was surgically amputated.",1
"An employee was using a pneumatic nail gun when the tool discharged a nail through an employee's hand, resulting in a laceration and fracture that required hospitalization.",1
An employee was swapping out a lasher at the rear of a bucket truck. The truck backed up and the employee's left foot/ankle was caught and fractured between the truck's tire and the pavement.,1
"An employee was using a J-bar to guide steel scenery over two ratchet straps. The J-bar snapped back and struck the employee's right little finger, amputating the tip.",0
"An employee was in the warehouse when they were bitten by a bug on their left forearm/wrist that resulted in swelling. The employee was hospitalized the next day for a possible allergic reaction or infection
.",1
"An employee was loading a container box and noticed a fence panel that was leaning. He went to secure the panel and stepped off when his foot slipped on the soil, causing him to fall to the ground. The employee sustained a fractured hip that required hospitalization.",1
"An employee was standing on an 18-foot, A-frame ladder to change light bulbs. The employee fell to the floor, resulting in a broken left elbow and pelvis.",1
An employee was walking with an empty trash can back to the work area when they tripped and fell to the concrete floor. The employee sustained a right hip fracture.,1
An employee was pushing a piece of equipment into the wash area for cleaning when the equipment fell and tipped onto the employee. They sustained fractures of the pelvis and ribs as well as lacerations.,1
An employee was loading materials for a job when his finger was caught between a PVC pipe and an I-beam that the employee and a co-worker were sliding off a forklift. The employee suffered an amputation.,0
An employee was operating a torque wrench to tighten bolts on a studded adapter when their right index finger was caught between the wrench head and the bolts. The finger was amputated above the first knuckle.,0
An employee was placing a roll of plastic film onto a thermoforming machine when two fingertips on his right hand were amputated by the machine.,0
"An employee was conducting routine steel coil packaging. When the employee moved the steel coil from the staging area to the packaging area, the metal chain link snapped. The employee was struck in the chest and knocked to the ground. The employee was hospitalized.",1
"An employee was performing daily rounds in the mechanical room when he tripped and fell forward, resulting in a left wrist fracture that required surgery.",1
"An employee was driving an asphalt roller when the vehicle drove over an uneven surface. This caused the machine to rock back and forth and the employee to fall off. The employee fell to the ground and the rear roller tire ran over the their right leg, resulting in a femur fracture, as well as an anterior cruciate ligament (ACL) tear and a meniscus tear.",1
"An employee was performing a post-assembly inspection of a tower crane. The employee was located on the counter-jib inspecting the trolley cable as the trolley was traveling out. When the trolley reached the jib end limit switch, the trolley stopped. The employee's right little fingertip became caught between the trolley cable and the spooled cable on the trolley drum, resulting in amputation.",1
"An employee was ascending a ladder system to secure lanyards to anchorage points to begin cable replacement work. The employee slipped and fell approximately 10 feet to the ground, resulting in a fractured rib and a punctured lung.",1
"On May 15, 2023, an employee was working from a ladder that was leaning against a utility pole. The utility pole broke, causing the ladder and the employee to fall approximately 15 feet to the ground below. The employee was hospitalized with a fractured T12 vertebra.",1
An employee was lowering or raising the ramp on a trailer during a delivery when their finger got caught between the ramp and the latch. Their finger was amputated at the nailbed.,0
An employee was in the school cafeteria and went into the kitchen area to get paper towels. She tripped on an uneven area of the floor and fell on her right side. The employee was hospitalized with a fractured hip that required surgery.,1
"An employee was manufacturing parts on a forming machine when a jam occurred. The employee cleared the jam and as the machine restarted, it caught her right index fingertip, resulting in amputation.",0
An employee was repairing and removing sprinkler piping. He was transitioning from the second tier of a pallet rack system to a scissor lift when he fell to the concrete floor and sustained a fractured leg.,1
An employee was transporting empty boxes on a forklift when it got caught on the corner of a rack system. The employee's left foot was crushed between a skid and the pedal of their forklift and fractured.,1
"On May 15, 2023, an employee removed a mirror from the bathroom to discard it. As the employee went to place it on the cart, the mirror broke. The employee sustained a laceration on the right forearm that required surgery.",1
"An employee was standing near a stack of wooden pallets in the warehouse when a forklift bumped into the stack, causing the pallets to topple over onto the employee. The employee sustained a fractured leg.",1
An employee was putting pipe onto a scissor lift when their hand was caught between the bar joist and the pipe as the lift was going up. The employee sustained a broken hand.,1
"An employee was pulling a synthetic winch line out of the winch rollers to attach to limbs and debris so that they could be dragged toward the chipping area. The employee's right hand was caught in winch rollers, resulting in a right ring finger fracture and lacerations to the right middle and index fingers.",1
A driver was stepping out of a trailer when they fell on a concrete jersey barrier and sustained left rib fractures that required hospitalization.,1
An employee was adding solid aluminum to molten steel when the crucible erupted. This caused a fire to occur in the area around the furnace. It is suspected that the molten steel splashed off the employee's chest and up through his face shield. The employee sustained second-and-third-degrees burns to his face and right hand.,1
An employee was sweeping when their knee gave out and they fell down the exterior basement stairs. The employee's head was injured and they sustained a neck fracture.,1
"An employee was walking down a hallway when they slipped on a wet spot on the floor, resulting in a fractured tibia.",1
An employee was operating a stand-up forklift when their leg became caught between a pole and the forklift. The employee was hospitalized for crush injuries.,1
"An employee was disconnecting a tractor trailer at a job site. When the employee pulled forward, the hydraulic hose broke loose from the trailer and projected through the back window of the trailer, striking the employee in the head and face. The employee was hospitalized with head and eye injuries.",1
"An employee was walking around a fabric punch machine to grab a broom and tripped. As he attempted to stop his fall, he grabbed the punch belt with his left hand. His fingers swung on the belt and went across the motor of the punch. He sustained injuries to two fingers on his left hand; the tip of one finger was amputated.",0
An employee was removing forms from a wall and a foundation when he fell backward. A form then fell on top of him and struck his head. The employee was knocked unconscious and was hospitalized for head trauma and lacerations.,1
"An employee was unstrapping a 20-foot-long stack of metal pipes when a pipe rolled from the truck bed. The employee's left hand was caught between the pipe and the guardrail, resulting in a crushed middle and ring finger as well as a fingertip amputation on the index finger.",1
An employee was cutting wood for a walkway using a hand saw when their left index finger was cut. The employee was hospitalized with a laceration and damaged tendon that required surgery to repair.,1
An employee was standing on a bundled stick stack to cut metal banding when his foot slipped and he fell into a railing. The employee sustained a ruptured liver.,1
"A forklift was being used to load an amusement park game onto a trailer. The game became unbalanced and began to tip over. An employee moved to prevent the game from falling, but the game fell on his leg and pinned it against a concrete curb. The employee was hospitalized with two fractures to his leg and a contusion to the head.",1
An employee was moving a manlift away from a truck when it struck a power line. The employee sustained electric shock.,1
"An employee was drilling a hole in steel using a magnetic drill when their glove was caught in the drill, resulting in two broken fingers, a broken wrist, and a broken forearm.",1
An employee was cutting pork with a band saw when their right middle finger was amputated above the first knuckle.,0
"An employee was working on a well when they were struck by a detached tubing joint, resulting in a left arm fracture.",1
"An employee was unloading tools. As they stepped off a lift gate of a box truck to the trailer, their left knee buckled, causing the right knee to buckle as well. The employee sustained a right knee fracture and a ruptured quadriceps tendon on the left and right leg.",1
"An employee was utilizing an overhead crane and magnet to move a 3,000-pound steel plate. As the plate was moving overhead, it struck another crane causing the load to fall and strike the employee. The employee was hospitalized for a fractured pelvis and vertebra.",1
An employee was loading a cart with product when she fell and hit her head on the ground. The employee fractured her thoracic spine and sustained bruising to her right shoulder and hip.,1
An employee was spotting a forklift when the vehicle touched a power line. The employee was holding a part of the forklift and sustained burns.,1
An employee was feeding a piece of lumber into the jointer when their finger slipped and contacted the blade. The employee's left ring fingertip was amputated.,0
An employee had climbed a transformer pole to begin tying in the phase when he came in contact with the transformer. The employee experienced an electric shock and burns to the right side of his body above the midsection and on his foot.,1
"An employee was readjusting the rigging on a beam attached to a crane. The beam began rolling down an uneven surface and struck the employee, resulting in a right tibia fracture.",1
An employee was troubleshooting a freeze plug press machine when his right middle finger was amputated. The machine was not locked out at the time.,0
"An employee was stepping down from a scaffold in a module manufacturing facility. The employee slipped on a pipe running through the module and fell approximately 3 feet to the floor of the module, landing on his right side. The employee was hospitalized with bulging discs in the neck.",1
"An employee was attempting to clean out the space below a planer when their right hand was caught in the planer blade. The employee sustained an amputation of their right index, ring, and little fingers, as well as abrasions to their right palm and wrist. The right middle finger was surgically amputated. The machine was not locked out/tagged out at the time.",0
An employee was on break when they lifted a vine and sustained a snake bite on their left ring finger.,1
A temporary employee was removing lumber from a roller conveyor and stacking it onto a pallet when they tripped and reached onto the sprocket chain. The employee's right index finger was amputated.,0
An employee was troubleshooting a large format digital press when his right index fingertip was amputated.,1
An employee was adjusting and stabilizing an oil tank that was being set into a containment bin by a telehandler when the employee's arm was caught between the tank and the containment wall. The employee sustained a left forearm fracture.,1
"An employee was near the motor compartment of a CNC machine, troubleshooting the guard. Another employee pressed a button to stop the machine at the end of the cycle, so that the injured employee could look at the machine. When the cycle ended, the motor returned to the ""home"" position and pinned the injured employee between the motor and the side of the machine. The employee was hospitalized with a crushed pelvis.",1
"Two welders were adjusting steel columns at the base plate when the tack welds holding up a 6 x 4 x 3/8-inch crossbeam failed. The beam fell 11 feet and struck the injured employee in the left rib area. The employee was hospitalized for T5-T7 vertebral fractures, fluid in the lungs, rib fractures, and bruising and contusions.",1
An employee was operating a powered pallet jack when her leg was caught between the lift and a stationary object. Her right tibia was fractured and required hospitalization.,1
"An employee was working near a backhoe when the stabilizer legs were lowered and landed on their right foot, requiring hospitalization.",1
"An employee was opening a valve to allow gas to empty into a manifold system when the line blew off. The employee was struck by the barbed hose from a tank, resulting in a laceration on the left side of the head between the left eye and ear as well as a neck fracture.",1
An employee was cleaning a mortar mixer when his middle and ring fingers were caught in the mixing paddle and mortar drum. The employee's right ring fingertip was amputated.,0
An employee was walking down steps when she fell from the fourth floor to the second floor. The employee sustained rib fractures and was hospitalized.,1
An employee was cleaning the seal bar of a packaging machine when it activated/cycled and their right index fingertip was amputated.,1
"An employee was buffing a floor when he tripped over a cord and fell to the floor, resulting in a broken leg.",1
"An employee was getting a bucket to mop up water on a floor. He became dizzy, tripped, and fell, striking the right side of his head on the floor. The employee suffered a head laceration and concussion.",1
"An employee was walking out of a room when they tripped over a rolled up rug beneath the water fountain and fell, resulting in fractured ribs.",1
An employee was taking an empty food bin to the sanitation sink to clean and sanitize it when she slipped on water on the floor and fell. The employee sustained a left leg fracture.,1
An employee was walking through the kitchen while cleaning and ensuring all equipment was turned off when they tripped and fell into the corner of a table. The employee sustained a subdural hematoma and globe injury to the left eye.,1
An employee at the Fenway Carrier Annex facility experienced back pain and was hospitalized.,1
"An employee was operating a textile machine when his fingers were caught in the fabric roller. The employee's index, middle, and ring fingers were amputated.",0
"An employee was lubricating equipment approximately 20 feet above ground level when he fell through an opening and landed on the ground. The employee sustained a fractured skull, fractured T11 vertebra, and brain bleed.",1
"On May 17, 2023, an employee was carrying two bottles of water up a scaffolding ladder when he slipped and fell approximately 12 feet to the dirt ground. The employee suffered a back injury that required surgery.",1
An employee was holding a door when their left little fingertip was amputated.,0
"On May 17, 2023, an employee was on a roof repairing leaks on HVAC units. He was hospitalized the next day for a bite from a brown recluse spider.",1
An employee was unloading a trailer from a transport trailer and fell to the ground. The employee fractured his right femur at the hip and required surgery.,1
"An employee was sanding a wall when they lost their balance and jumped off a baker scaffold, landing on the edge of the window. The employee sustained a leg injury.",1
An employee was performing HVAC maintenance when they stepped through a floor board and fell approximately 10 feet through the ceiling to the floor. The employee sustained a right shoulder injury.,1
"A truck driver was exiting the driver seat of his truck and slipped and fell to the ground, sustaining a left hip fracture.",1
"A roofing employee was installing tile underlayment using a hot asphalt application. The employee slipped and grabbed a bucket of hot tar to gain balance. The hot tar then spilled on the employee, and he fell from a one-story roof onto the bushes below. The employee sustained burns on his arms and back.",1
An employee was edging glass when a piece of glass broke off and injured the employee's lower right leg. The employee was hospitalized.,1
"An employee was delivering electrical supplies. The employee climbed into the cab of his truck when he lost his balance and fell, striking his head on the pavement.",1
An employee was walking on a walkway when they fell three stories through an open hole to the ground below. The employee sustained four rib fractures.,1
An employee was picking up garbage along a garbage route when they collapsed and became unresponsive due to heat exhaustion.,1
"On May 18, 2023, a maintenance employee was descending a fixed ladder when his ring was caught on a ladder rung. The employee sustained a fracture to the left ring finger that required surgery.",1
An employee was on a ladder hanging a light fixture when he was shocked by a live wire. He fell from the fourth rung of the ladder to the concrete floor and sustained a hip injury and left forearm laceration.,1
"An employee was replacing a belt on an HVAC system and pulled the belt to check its alignment. His right little and ring fingers were then pinched between the belt and pulley, resulting in amputation of the right ring finger.",0
An employee was climbing down a benched excavation when they fell approximately 10 feet from the ladder to the bottom of the excavation. The employee was hospitalized for a broken right arm and an injured ankle.,1
"On May 18, 2023, an employee was traveling between two areas when a partially frozen slug of phenol containing material from an overhead leak (phenol/sulfate water) dislodged and struck his hard hat and jacket. Liquid then splashed onto his neck and face and the employee sustained first-and second-degree burns to the right side of his neck and torso.",1
"An employee was aligning bar stock in the collet of a CNC machine and troubleshooting. As the employee was making an adjustment in the collet cage, the machine was activated, causing the collet to move forward and pinch the employee's hand. A finger and the thumb on the hand were medically amputated.",0
"Employees were pouring molten metal when one of the employee's hands became hot, causing them to let go of one side of the ladle. The ladle tipped to the left, spilling metal onto the floor. It then splashed up and into the boot of the injured employee, resulting in burns to his left leg and foot.",1
"An employee was loading and unloading palletized material with a powered pallet jack. The pallet jack backed up and the employee's leg was crushed between the pallet jack and a bumper/trailer hitch, resulting in fractures to the right ankle and left tibia.",1
"An employee was walking out of the back-room door when they struck their hip against a wall, resulting in a hip fracture.",1
"An employee was using a hydraulic press to repair a hydraulic tool that was stuck in the open position. Upon adding downward pressure from the hydraulic press, the tool's hydraulic quick coupler broke and released the ball bearing inside the coupler. The ball bearing struck the employee in the abdomen, resulting in lacerations and abrasions. The ball bearing also penetrated the employee's abdomen.",1
A temporary employee was cutting meat using a chuck saw when he sustained a laceration between the left ring and middle finger that required hospitalization and surgery.,1
"An employee was in the packaging area in a warehouse transporting a 5-foot tilt and roll ladder back to its storage location. The employee was pushing the ladder while standing inside of it when it began to tilt over. As the employee reached to stop the ladder from tilting, his right hand contacted the metal serrated platform. The ladder continued to tilt and as he pulled his hand free, the employee's right middle fingertip was amputated.",1
An employee was removing hanging scaffolding equipment from the boom of a crane when they were caught between the wire rope support bracket and the top rail of a trolley crane's catwalk. The employee suffered a muscle injury from the left hip to the ankle.,1
"An employee was operating a stand-up forklift when the vehicle made contact with a rack. The employee's wrist was crushed between the rack and a part of the unit, resulting in a left wrist dislocation.",1
"An employee was clearing non-conforming product off a packaging table. As the employee went to clear a piece of plastic from the trim press, the press cycled and caught the employee's left hand. The employee's middle and ring fingertips were amputated and they sustained lacerations to the left hand.",0
"An employee was operating an electric pallet jack. The pallet jack collided with a forklift, and the employee's foot was caught between the carriage of the pallet jack and the rear of the forklift. The employee's left big toe was amputated.",0
"An employee was utilizing a bucking bar during the installation of rivets on an aircraft skin. A portion of the rivet stem broke, causing metal fragments from the rivet to strike the employee in the left eye.",1
"An employee was working on a bander when his finger was caught in the pulley and belt, resulting in a right index finger amputation.",0
An employee was installing screws on a second floor window when the ladder he was using slipped out from under him. The employee fell and sustained an ankle fracture.,1
"An employee was working at a 6-foot height on a ladder, replacing a window vent on a greenhouse. The ladder shifted and fell; the employee fell with it, then landed on it as he hit the ground. He suffered a bruise to the left forearm and his hip was broken in multiple places. He was hospitalized.",1
"An employee was climbing into a manhole to clean out debris when a rung on the fixed ladder broke and the employee fell 16.9 feet, resulting in a dislocated left elbow and four fractures to their left heel.",1
An employee was operating a zero-turn lawn mower over a dike when the vehicle crushed the employee's shin between a concrete pillar and the mower deck. The employee sustained a tibia and fibula fracture as well as a severe laceration. The employee was hospitalized.,1
An employee was climbing the loading platform ladder to load a semi-trailer. The employee lost his footing and fell over 6 feet to the surface below. The employee sustained a skull fracture.,1
An employee was pruning when they were bitten on the left index finger by a venomous snake.,1
An employee was stepping off a tank trailer bumper onto a two-step utility step stool when they fell backward and rolled their left ankle. The employee sustained a left fibula fracture that required hospitalization and surgery.,1
"An employee was unloading a forklift from a tow truck to the ground. As the vehicle hit the ground, it rolled over and the employee's arm was crushed underneath it, resulting in damage to the bone and muscle.",1
An employee was walking down the hallway when they tripped over a raised concrete slab on the floor and fell. They sustained a right elbow fracture that required hospitalization.,1
"On May 18, 2023, an employee was working on electrical equipment when they contacted a piece of electrical gear that was energized, resulting in an arc flash. The employee sustained burns.",1
An employee was exiting the back of a box truck. He fell about 4 feet and his face struck the pavement below.,1
An employee was cleaning a chicken house and was removing debris from a fan when her finger contacted the fan blade. The employee's left middle fingertip was amputated.,0
"An employee was walking through the kitchen when they slipped on a metal grate on the floor and fell, resulting in right leg and hip fractures.",1
An employee was bending sheet metal using a hydraulic brake press when their fingers were pinched between the stock and ram. Their left middle finger was amputated.,0
"An employee was using high pressure, hydro-blasting equipment to clean a part when the water stream contacted his left foot, resulting in a laceration.",1
An employee left the locker room and began going down the stairs when he fell and sustained a left fibula fracture.,1
An employee was wrapping pallets when the pallet wrapper became stuck near the top. The employee was adjusting the photo eye when their right middle fingertip was amputated by the chain and sprocket.,0
An employee was servicing a gas lifting system when the system released pressure and struck the employee. The employee sustained injuries that required hospitalization.,1
An employee was on the CNC machine table cutting an object when they tripped over the torch hose and fell off the table to the ground. The employee sustained a left femur fracture.,1
"An employee was working on top of a rebar mat that was about 4 feet off the ground. As he walked across the mat, he stepped into a gap and his lower leg was caught in the rebar. His right leg twisted, and he suffered fractures to the tibia and fibula. He was hospitalized.",1
A temporary employee was leaving the locker room at the end of their shift. Another employee went through the door and the injured employee went to catch the door from behind her. The employee's finger then got caught between the door and the door frame; their fingertip was amputated without bone loss and medically reattached.,0
"An employee was stocking merchandise on the sales floor using a top stock cart when he lost his balance and fell to the concrete floor, resulting in fractures to his right hip and femur that required hospitalization.",1
An employee was cleaning the bars of his tack truck when hot asphalt cement sprayed on him. He suffered second-degree burns to the neck.,1
"An employee was cutting small aluminum parts on a vertical bandsaw when their finger contacted the saw blade, resulting in a partial amputation of the little finger on their left hand.",0
An employee was working from a ladder to fix an HVAC system when he lost his balance and fell approximately 5 feet to the ground. The employee sustained a hip and right hand fracture.,1
An employee opened trailer doors to prepare to offload pallets when a pallet of product fell out and struck him. The employee was knocked to the ground and sustained a right arm fracture.,1
"On May 19, 2023, an employee was walking away from a pallet when his foot became caught in a piece of plastic banding. The employee tripped and fell to the floor, resulting in a hip fracture.",1
An employee was using a paint sprayer when the spray gun became clogged. The employee went to unscrew the tip and spray the clogged paint out when paint was injected into his right hand.,1
"An employee was opening the valve for the liquid asphalt hauler to make a delivery. The valve was opened from the storage tank that gravity fed the hanging hose for loading trucks. Liquid asphalt sprayed into the air, burning the employee on the left forearm, face, and ear.",1
An employee was using a bandsaw to cut conduit when their right index fingertip was amputated.,1
"An employee was inspecting noise from a pumping unit. As he went to push on the belt guard, the employee was pinned between the crank arm and the base of the unit, resulting in a lacerated liver, and bruising to the chest, arms, back, and shoulders.",1
"An employee was building a magnet channel assembly. The employee's right middle fingertip was caught between two magnet plates, causing the amputation of about 1/4 inch of the fingertip.",1
"An employee was using an A-frame ladder to access the dosing furnace. As the employee was exiting the furnace, he fell approximately 8 feet to the floor, sustaining a broken ankle.",1
"An employee was moving a mud bucket from a work area to a storage area when the bucket got caught on a drain line and tipped over onto the employee's left leg, resulting in a fractured tibia.",1
"An employee was on an A-frame ladder hanging a wall poster. As they were climbing down, the employee missed a step and fell approximately 3 feet onto concrete, resulting in a hip fracture.",1
"An employee was closing the door of a bobtail truck after finishing unloading products. As the employee was pulling down the door of the truck, he stepped back and tripped over the ladder attached to the truck. The employee then fell off onto his back and sustained rib fractures.",1
An employee was stocking shelves in a warehouse when she slipped on a piece of cardboard on the floor and fell. The employee sustained a left hip fracture that required hospitalization.,1
An employee was dumping a self-tipping hopper into a roll off bin. The hopper came back unexpectedly and amputated the employee's left index fingertip. Their left middle finger was also fractured.,1
An employee was walking around an excavator to put a pin in the thumb attachment when the attachment fell . The employee sustained a left foot fracture.,1
An employee was tightening a charging port on a golf cart when he suffered an electrical shock to his lower forearm and hand.,1
"On May 19, 2023, at 12:50 PM, an employee was running when they fell to the concrete floor and sustained a dislocated/fractured left elbow.",1
"An employee was providing nursing care when they were thrown to the floor by a patient, resulting in a pelvic injury.",1
"An employee was cleaning and inspecting an in-feed conveyor belt when their right arm was caught in the conveyor drive chain and sprocket, resulting in fractures and lacerations.",1
"An employee tripped over a mounted pipe and fell. The employee's chin struck the floor, and the employee suffered a broken jaw.",1
An employee was servicing an airline above a polishing machine when their left foot slipped off the work platform and contacted moving parts of the nearby chain pusher. The employee was hospitalized for a left foot fracture and a laceration to the left big toe.,1
"An employee was walking toward the back of the store on the sales floor when she tripped on a raised tile, injuring her knee. The employee was hospitalized and had surgery.",1
"An employee was operating a baggage tug and transitioning between gates. As the employee was coming to a complete stop parallel to an aircraft, the vehicle ran over a chock. His left hand was in the wheel well and was pinched between the wheel and the inner wheel well. The employee's left middle fingertip was amputated.",0
An employee was disconnecting service lines when he slipped and fell from the tractor to the ground. The employee sustained an elbow fracture and a leg laceration.,1
"An employee was operating a stand-up forklift to close doors around the facility. As the vehicle was traveling in reverse, the forklift struck a wall and the employee's left foot was pinned between the forklift and the wall. All of the toes on the employee's left foot were amputated.",1
"At 12:30 p.m. on May 20, 2023, an employee was re-entering a building after taking out the trash when the door closed on his left ring finger. He suffered a fingertip amputation and was hospitalized.",1
A mail carrier was delivering mail to a private residence when a dog came through the screen door and bit the employee's left wrist resulting in a fractured wrist that required surgery.,1
"An employee was making a splice on a hanging roll of polyethylene. A forklift bumped the roll, which struck the employee and caused him to fall backward. His back struck a rolling cart and was injured.",1
"An employee was sweeping behind a guardrail and stepped on the lower portion of the guardrail when he lost his balance. As he stepped back, his foot became stuck between the guardrail and a transformer, resulting in a compound fracture of left tibia and fibula.",1
"An employee had just cleared damage to a utility pole that had been broken by a motor vehicle accident and was laying over the highway. As the employee was parking his vehicle, the vehicle’s radio antenna contacted the low-hanging energized conductor, causing the vehicle to become energized. The employee stepped out of the vehicle and experienced an electric shock, resulting in second-and-third-degree burns to the head, left upper arm, left hand, left leg, and left foot. His little toe was medically amputated.",1
"An employee was standing on the sidewalk outside of the car wash when they were struck by a customer's car, resulting in a leg fracture.",1
"A catering team had just finished serving an aircraft and were participating in training tasks. The truck box was lowered when it was stopped midway, approximately 10-12 feet off the ground. The back door was opened and the injured employee fell to the concrete below, resulting in two wrist fractures.",1
An employee shot an another employee in the abdomen. The injured employee was hospitalized.,1
An employee was climbing a ladder to inspect a roof when they fell 8-10 feet to the pavement. They sustained fractures to the left foot and right wrist as well as a possible right foot fracture.,1
"An employee was working on a shrink wrap machine and placed a pallet on the turntable. The shrink wrap film was held down so the film would engage the corners of the pallet. The employee's left middle finger was caught between the rotating turntable and the porch panel, resulting in an amputation to her left middle finger.",0
"An employee was bracing an extension ladder while his coworker installed a 10-foot, 40-45-pound pipe. The pipe fell onto the injured employee's head and he sustained a hematoma, C3 and C4 vertebral fractures and a forehead laceration.",1
"On May 22, 2023, an employee was working as a framer and knelt on a nail that was on the ground. The nail penetrated his knee and entered the bone. He was hospitalized.",1
"An employee was operating a pallet jack up a ramp. The employee rotated the pallet jack and it gained momentum, causing the employee to step off. His foot was then wedged between the vehicle and the yellow dock pylon/barrier. The employee sustained a puncture and laceration to the right ankle.",1
"An employee was troubleshooting and servicing a belt or roller on a conveyor system when their arm was caught between a belt and roller, resulting in a laceration to the right biceps and an upper arm fracture.",1
"A flagger in a construction zone was struck by a street sweeper, causing a contusion and broken bones that required hospitalization.",1
An employee was cleaning the slicer and amputated her right middle fingertip.,0
An employee was cutting a tree into smaller pieces using a chainsaw when the chainsaw became stuck. The employee pulled back on the chainsaw and it lacerated their shoulder/arm.,1
"An employee was loading a traffic barrier onto a trailer. The employee unhooked the chains used to lift and place the piece of traffic barrier onto the trailer. As he was moving to exit the trailer, a forklift backed up and the chain caught the barrier and caused it to slide. The employee was struck by the sliding barrier and pushed off the trailer onto the concrete pavement below. The employee sustained torn ligaments and tendons to the right knee as well as possible bone damage.",1
"An employee was descending a fixed ladder when they fell 5-7 feet to the concrete floor, resulting in a fractured lumbar vertebra.",1
"An employee was putting spacers on bore pipes when his left index finger was caught between the spacers and the pipes, resulting in a fingertip amputation.",0
An employee was catching material as it came out of a roll former. His right ring finger was caught between the material and an object and was amputated above the first knuckle.,0
"A drivetrain was being removed from an industrial wind turbine using a crane. An employee was up the tower, directing the crane, when the load shifted forward and lacerated the employee's right calf.",1
An employee was placing wedges into a tree they were cutting down when the tree fell and struck the employee. They sustained a lower leg fracture.,1
A maintenance employee sustained a crush injury to their left little finger while performing maintenance on a block saw. The fingertip was later surgically amputated.,0
"An employee was sitting on a stool inspecting products when the stool collapsed. The employee's hand was caught in the collapsing stool, resulting in the partial amputation of a finger.",0
"An employee was uncoupling a loaded trailer from the truck. At the same time, the equipment that was loaded on the trailer was being removed from the trailer. The unloading of the equipment caused the uncoupled trailer to move back and upward, trapping the employee between the front of the trailer and the back of the truck. They sustained rib fractures and a punctured lung.",1
An employee was greasing a chain wheel in a machine when their finger was caught in the wheel. They sustained a fingertip amputation.,1
"An employee was tightening bolts on a gasket flange. When he descended from a 6-foot A-frame ladder, he fell from the third step from bottom to the ground. The employee sustained a compound fracture to the left ankle and was hospitalized.",1
An employee was blowing off a walkway in and around the pool area of a subdivision. The employee went over the fence and his leg became caught on the fence. The employee fell to the concrete walkway and sustained a dislocated elbow.,1
"At about 9:15 a.m. on May 22, 2023, an employee was using a 5-pound hammer to remove the weld on a pipe support and knock the support lose. The hammer missed the support; the employee's left index finger struck the support and was lacerated and broken. The fingertip was medically amputated.",0
"An employee was adjusting the locking chain on the rear hatch of a dump truck. The hatch shifted and pinched the employee's fingertip, resulting in amputation.",0
"An employee was preparing an exam room for a patient. The employee tripped over a trash can, fell to the floor, and suffered a broken right hip.",1
An employee was working as part of the press crew and was assigned to unload the finished part from the bottom die once the cycle was complete. The employee reached above the light curtain to remove a piece of clay material stuck to the top die when their fingers were caught between the press die. The employee was hospitalized and underwent surgical amputation of their fingers.,1
"An employee was removing nuts and bolts to replace cement flow through a pipe. While using an impact gun on the bolt and a wrench on the nut, the nut spun due to torque and the employee's right index fingertip was caught between the wrench and the flange, resulting in an amputation.",1
"An employee was moving a compressor to a cart with a lifting device when his left index finger was pinched between the compressor and the lifting device, resulting in amputation of the fingertip.",0
"An employee was lifting a 1,600-pound transformer with a pump jack when the pump jack collapsed. The employee suffered a partial amputation to his right middle fingertip.",0
"An employee was inspecting piping when the guarding of the pressure mat or safety door malfunctioned, causing the pipe from behind to move forward. The employee was caught between both pipes and the conveyor, resulting in a left leg amputation.",0
A temporary employee was driving a forklift when it struck a support beam. The employee's right big toe was caught and amputated between the forklift and the beam.,1
"An employee was installing an attachment onto a drill rig Kelly bar drive shaft. While installing the retaining pin, the outer Kelly bar fell approximately 1 foot and crushed the employee's left little finger, resulting in amputation.",0
"An employee was operating a table saw when his left thumb, index, and middle fingers came in contact with the saw blade. The employee sustained lacerations to the left thumb and middle fingers that required hospitalization.",1
"An employee was welding a pipe. The welding filler rod and vise grips became stuck. When the employee freed them, they made contact with the employee's chest, causing electrical burns.",1
"An employee was repairing the drive motor of a carcass-carrying cart. The employee raised the hinged slide and secured it with the chain attached to the slide. He then raised the cart off the ground by using the winch on the cart so that he could place wooden blocks underneath it. When the employee lowered the cart onto the blocks, the chain holding the slide in the upward position loosened, causing the slide to fall. The employee's left index finger was caught between the slide and metal plate, resulting in the amputation of his fingertip.",0
"An employee was working in a boom lift to help tear down a building. The employee stepped out of the boom lift and onto one of the trusses when the building collapsed, causing the employee to fall approximately 17 feet to the ground below. The employee sustained fractures to the wrist, hand, ribs, and face.",1
"On May 22, 2023, an employee was working on a shear to cut a metal plate. As he got to the last piece of metal, the machine engaged, crushing his finger. The employee sustained a right index finger fracture.",1
"An employee was checking the solids on the crystallizer and melter. As the employee opened the valve to get a sample, the camlock came loose and the employee was sprayed with 170-180-degree hot salt slurry. He sustained second-degree burns on his thighs that required hospitalization.",1
An employee was squatting down to lift a fixture off the floor when they lost their balance and fell backward on the floor. The employee sustained fractures to the third and forth vertebrae.,1
"On May 22, 2023, an employee was observing parts on a machine when their left thumb was pinched between the plastic conveyor belt/pusher and a metal plate, resulting in partial amputation.",0
"An employee was administering medication to a patient. The employee's foot became tangled in a phone cable, causing the employee to fall and suffer a broken left hip.",1
"An employee was on a scaffold approximately 10 feet, 4 inches high operating a handheld concrete cutting saw. The saw kicked back and knocked the employee off the scaffold to the concrete floor below. The employee sustained a dislocated right shoulder, fractured right humerus, and a possible vertebral fracture.",1
An employee was using a knife to cut a hose on welding equipment to investigate a leak. The knife amputated one of his fingertips without bone loss.,0
"An employee was moving a suspended skate on a frame assembly when the chain holding the skate was cut. The skate fell and the employee's right hand and wrist were caught between the skate and the frame, resulting in lacerations.",1
"An employee was pushing a loaded molding cart through the store when they tripped and fell over the cart onto the floor, resulting in broken bones.",1
An employee was lifting a metal trapeze when they sustained a hernia.,1
"At about 3:30 p.m. on May 23, 2023, an employee stabbed another employee in the abdomen with a knife. The injured employee was hospitalized.",1
"An employee was working in the power assembly area where chains are placed onto conveyors. As the employee went to retrieve a guardrail to put on a conveyor, they tripped over a spool of chain on floor and fell, sustaining a left femur fracture.",1
"An employee fell from a mobile scaffold, suffering head and back injuries.",1
"An employee was servicing an exhaust fan in the tree wash cabinet. He had one foot on the pump motor and the other foot on a raised threshold when he lost footing and fell into a catch basin. The catch basin contained heated water and chemicals which caused the employee to sustain first, second, and third-degree burns to lower extremities as well as a laceration to the right triceps.",1
An employee slipped while walking down stairs. He suffered a potential head injury and was hospitalized.,1
"An employee was working on the tarmac at an airport, taking packages off the belt of a loader. The tip of her right ring finger was amputated and she was hospitalized.",1
"An employee was on a 7-foot A-frame ladder clearing debris from a vacuum line in the shop. While on the top step, the employee lost his balance and fell to the ground, resulting in five rib fractures and a punctured lung.",1
"An employee was helping to unload a piece of rebar from a double bender. After the programmed bend was complete, the employee approached the end of the bent bar, which was approximately 13 feet away from the point of operation, to assist with unloading the finished bar into a catch bin. As the employee approached the bar, an unprogrammed movement of the bending pin caused the bar to bend toward the employee. The rebar came loose and struck the employee, forcing him backward into a stationary conveyor table attached to the bender assembly. The employee sustained broken ribs, internal injuries, and a laceration on his cheek.",1
An employee was working on a machine that grinds toffee into small pieces. The employee's hand became caught between two wheels that grind and was pulled in. The employee's hand was crushed and required surgical amputation to finger(s).,0
An employee was unrolling plastic prepping for work loading and tried to push a bullet into a hole. His left thumb was crushed between the bullet and the plate.,1
"An employee was moving a steel beam that was on the ground when it rolled, resulting in a leg fracture.",1
"An employee was hammering a piece of the die cast machine to flatten it out or flush into place when the brass hammer slipped from the employee's grip. As they went to catch it, the employee's right ring finger was caught between the brass hammer and the sliding pin of the die cast machine. The employee's right ring finger was partially amputated.",0
"On May 23, 2023, an employee was working the fryer when they slipped on grease and their right arm went into the fryer, resulting in burns.",1
"An employee was operating an aircraft spotting dolly that had been offloaded from a flatbed tractor trailer. As the employee went to drive the unit forward, the spotting dolly bucked, causing the rear of the unit to swing sharply to the left and strike the edge of the trailer. The employee sustained right ankle, right tibia, and left hip fractures.",1
"A nurse was performing work duties when an inmate struck her with a rock, resulting in multiple facial injuries.",1
"An employee was grinding an area on a chiller so that the supporting legs could be welded to the structure. The grinding disk bound and kicked inward toward the employee, lacerating the front of the employee's leg above the knee.",1
"An employee was removing cardboard pieces that were causing a packaging line malfunction when the machinery moved, propelling the employee into the upper metal poles of the machine and exerting pressure on the employee's torso that caused a contusion to their liver.",1
An employee was operating an excavator when it tipped over and fell off the dock into the water. The employee sustained a pelvis fracture.,1
"An employee and a colleague were moving two pieces of rebar when a tie was cut. The employee holding the rebar dropped it while it was above the injured employee's hands, resulting in partial amputation to their left middle finger.",0
An employee was walking to get linens in the basement when she tripped on the edge of the non-slip rug and fell onto her back. The employee was hospitalized for an L2 vertebral fracture.,1
An agent developed heat stress while taking part in a SWAT team tryout.,1
An employee was inspecting the floor to install floor trusses on the second level when they fell approximately 9 feet to the concrete floor below. The employee sustained a right leg fracture.,1
"An employee was adjusting a switch on the loading cradle for a metal tracer lathe. The machine cycled, resulting in an amputation to the left index fingertip.",0
"On May 24, 2023, an employee was on a 20-foot ladder running a test on the control panel at the top of a transformer. The employee began descending the ladder and reached the third or fourth rung, when the ladder shifted, causing the employee to fall with the ladder. The employee's right leg was caught between the rungs resulting in a right ankle fracture.",1
"An employee was on a ladder repairing a service drop from a pole to the customer's home. The employee cut the wire at the mid-span, causing the wire to release tension. The employee fell from their ladder onto the paved roadway below and sustained head/facial abrasions as well as an L1 vertebral fracture.",1
"An employee was assisting his co-worker, who was operating a forklift, with offloading a flatbed truck. The employee's finger was caught between the load and the forks of the forklift, resulting in partial amputation to his left index finger.",0
An employee was walking down the exterior stairs of an attraction when they fell and sustained a right patellar tendon rupture. The employee was hospitalized.,1
"An employee was taking parts out of a punch press when the press came down and crushed her right hand, resulted in an amputation.",0
An employee was carrying a sheet of plywood to the work area when an excavator swung and struck the employee. The employee sustained rib fractures and a hernia.,1
"An employee was unloading a forklift from a truck. The forklift's mast tilted and the forklift fell approximately 18"" to the ground. The employee struck his head on the forklift's overhead crossbar and sidebar, causing head lacerations and a displaced fractures of the C6 and C7 vertebrae.",1
"On May 24, 2023, an employee was leaving the building when their foot was caught in slatted carpet, causing them to trip. They fell against the glass door and sustained a hip fracture and lacerations to the hand, wrist, and forearm that required hospitalization.",1
"An employee was moving a metal door, creating a spark. The employee's boots caught on fire due to residual flammable chemicals that were on his boots. The employee sustained burns to the ankle/metatarsals of both feet.",1
An employee was walking to get supplies when they tripped over an extension cord and struck a wall. The employee sustained a slipped disc.,1
An employee was emptying a small hopper full of cardboard into a compactor. He was undoing a latch that allows the hopper to move forward when his left little finger became caught between the hopper and the mast of the forklift. His left little finger was partially amputated.,0
"An employee was using a belt grinder to grind a 3x3 piece of metal. The employee's hand slipped and struck the grinder, partially amputating his left thumb.",0
An employee was collecting a pulp sample when their legs became caught between conveyors. The employee sustained a laceration to the right leg and a contusion to the left leg.,1
An employee was on a second-story flat roof installing insulation when they fell 24 feet through a piece of insulation. The employee sustained forehead contusions and a concussion. ,1
"An employee was carrying a concrete bull float handle when it grounded a powerline, creating an arc. The employee sustained burns.",1
An employee was cutting food in a kitchen using a knife and amputated half an inch from the tip of his left thumb.,0
An employee was on a stack of pallets that was approximately 3.5 feet tall when he slipped and fell to the concrete floor below. The employee sustained a left hip bruise and a forehead hematoma.,1
"An employee was working from a ladder to complete electrical installation work when they fell 8 feet to the ground, resulting in a back fracture. The employee was hospitalized.",1
"An employee had just completed loading a trailer and went to raise the dock leveler when the dock unlock button was pressed. The truck pulled away, causing the dock plate to fall and the employee fell 3-4 feet from the ramp to the pavement below, sustaining a lower left leg fracture. The employee was hospitalized and underwent surgery.",1
An employee was moving a pipe to extend a gas line at a landfill. A rattlesnake bit his right ring finger.,1
"On May 24, 2023, an employee was loading a branch into the back of a trash truck when his hand became caught in the cutting mechanism of the truck. The employee's left middle fingertip was amputated to the first knuckle.",1
"An employee was climbing a ladder on a 12 1/2-foot tank trailer. He fell to the ground, suffering two fractures to the pelvis and a broken lower spine.",1
An employee was cleaning rollers on a machine. His right arm was pulled into the pinch point between two conveyor belts and crushed. The employee suffered multiple fractures of the forearm and was hospitalized.,1
"A forklift operator was unloading a large case from the back of the trailer while the injured employee was removing straps from the trailer. As the case cleared the trailer's edge, the case tilted toward the injured employee and struck her. She sustained fractures of the right collarbone, ribs, and toes as well as a spleen laceration.

Note to coder: Forklift operator and injured employee (driver) are not the same.",1
"On May 24, 2023, an employee was in a patient's room providing respiratory therapy. The employee tripped between an IV pump and a vital signs machine, fell to the floor, and suffered a broken right tibia and a dislocated patella.",1
"On May 24, 2023, an employee was removing the overhead crane strap from the center of a coil while loading the coil onto a press. After the coil was placed on the uncoiler, the employee's left ring fingertip was caught between the crane strap and the coil, resulting in amputation.",0
"An employee was using a pressure washer to clean a sump pump. As he was standing up, the pressurized stream of water struck him, resulting in a laceration to his right arm that required surgery and an abrasion to his abdomen. The employee was hospitalized.",1
"An employee was assisting another employee with closing a metal dumpster lid. The lid closed on the injured employee's hand, resulting in a partial left ring finger amputation.",0
"An employee was assessing damage to an electrical box while on top of a roll of paper that was held by the clamp arms of a forklift. The employee was pulling wire on the junction box while elevated but came in contact with a live wire and received an electric shock, which caused the employee to fall 20 feet to the ground and sustain a fractured leg, a broken pelvis, and a broken right eye socket.",1
"An employee was riding as a passenger in the cab of a garbage truck that was driving in a parking lot. As the employee exited the truck, it ran over the employee's right leg and foot and their left foot and ankle. The employee sustained a right leg amputation below the knee and multiple left foot/toe fractures that required hospitalization.",1
"An employee was performing routine maintenance on refrigeration equipment when the shut-off valve failed, causing refrigerant to leak and burn the employee's right index finger.",1
An employee was attaching a vacuum hose manifold to the vacuum unit when suction pulled the employee's left hand into the impeller resulting in amputations to their middle and ring fingers.,1
"An employee was driving a pallet jack around a corner. While avoiding a collision with another employee, he fell off the pallet jack and suffered a broken left leg.",1
An employee was helping to pull out the main cable of a crane. The employee was on the deck of the crane with the reeving winch. He was trying to guide the cable in the reeving winch when his left hand was pulled into the winch resulting in amputation of his left middle fingertip and a broken ring finger.,1
An employee was walking when she slipped on a puddle of water on the floor. She fell and fractured her left ankle.,1
"An employee was placing material in a punch press when the machine activated, resulting in amputation of the employee's left index finger at the first joint.",0
"An employee was using a wrench to unjam a metal basket that was being used in an apple cooking process. When the basket was unjammed, it struck his left middle finger, knocking it against a steam injection cooker. The fingertip was broken and partially amputated.",0
"An employee was walking on a steel beam when they fell 14-feet, resulting in multiple fractures to the head, back, and clavicle, as well as a collapsed lung.",1
"An employee had been towing a trash truck and discovered that the drive shaft was disengaged. The employee left their vehicle to retrieve tools to re-engage the drive shaft of the trash truck. The trash truck rolled over both of the employee's legs, resulting in injuries that included severe lacerations.",1
"An employee was operating a machine that wound polyester yarn through a piece of hollow sleeving. The in-feed yarn became caught under the spool on the floor. The employee bent down to the floor and tried to clear the yarn from under the spool. When he stood up, the yarn whipped and brushed against his left arm, then entangled his left thumb. It then pulled his thumb against a guidepost, where the thumb was amputated.",0
An employee was using a crowbar to tilt a pad mount transformer in order to place a spacer under the edge. The crowbar slipped and the transformer fell and amputated his fingertip.,0
"At about 9:45 a.m. on May 25, 2023, an employee was installing a spreader pipe on a 10-by-10 manhole box. While the pipe was being moved into position, the spreader slipped. The employee's thumb was caught in an eyehole and pinched between the spreader and the receiver, causing an amputation to the thumb tip.",0
"An employee was monitoring the molding dough line and cleaning up the surrounding area. They went to grab a piece of scrap dough when the rounding drum caught the tip of their index finger, resulting in amputation of the index finger.",0
An employee was cutting steel with a torch when their jacket caught fire. The employee sustained burns to their arms and back.,1
"An employee was standing five feet up on a 12-14 foot extension ladder to complete restoration work on a multi-family home. The ladder shifted, causing the employee to fall to the dirt surface below and sustain a left forearm fracture.",1
"Employees were pushing a drywall cart filled with heavy metal sheets inside a building. When the cart was turned, it tipped and struck an employee's legs. The employee suffered a broken left leg and was hospitalized, requiring surgery.",1
An employee was drawing lines in the parking lot when they were struck by a vehicle. The employee sustained bruising and limb fractures that required hospitalization.,1
An employee was doing masonry work on the ninth floor of a building that was under construction when they were struck by lighting. The employee experienced severe chest pains.,1
An employee was operating a chop saw when three fingers were amputated. The machine was guarded at the time.,0
"An employee went to assist a forklift operator to stabilize a load of core boards. The core boards cascaded down, pinning the employee between the boards and a metal lift that holds other core boards. The boards then fell onto the employee's ankles, resulting in a right tibia fracture and left leg fracture.",1
"On May 26, 2023, a temporary employee was adjusting curl bars in a machine when his right glove got caught between the curl bars, degloving his right hand.",1
"On May 26, 2023, at approximately 2:30 AM, a sanitation employee was picking up a cardboard box in the freezer and slipped on black ice. The employee was hospitalized with a fractured left ankle that required surgery.",1
"An employee's left middle finger was pinched between a hopper and its lid, resulting in amputation of the fingertip.",1
An employee was helping guide a slab of material while walking with a forklift. The employee was in front of the tire while holding the slab and the vehicle ran over his left leg. The employee was hospitalized and suffered an amputation to part of his left leg.,1
"An employee was climbing down a ladder when they slipped on granules. They fell approximately 10 feet to the ground and struck a pallet, resulting in a fracture between the knee and ankle.",1
"On May 26, 2023, at 7:00 AM, two employees were finishing a shift when they had an altercation. The injured employee was slammed to the ground and sustained head trauma that required hospitalization.",1
"An employee was moving a patient off one bed and onto another using a draw sheet to assist the patient with a ""log roll."" The patient rolled off the bed and onto the employee, pinning the employee's leg underneath. They sustained a right lower leg fracture.",1
"An employee was running to stop a cow. As they ducked under a fence, their head struck against the pen pipe, resulting in a head laceration and injuries to the head, neck, and spine that required hospitalization.",1
A final drive amputated an employee's finger as they helped another employee.,1
"An employee was operating a mobile cart in a designated pass location between railroad tracks. The cart became stuck, then tipped over as the employee tried to release it by maneuvering it. It broke both the employee's legs and crushed their feet.",1
"An employee was installing edge drip when they fell from the roof to the ground, sustaining back fractures.",1
"An employee was sweeping near a conveyor. The conveyor grabbed the employee's push broom and pulled it in; the machine then caught both of the employee's hands. The employee suffered broken bones, lacerations, and contusions and was hospitalized, receiving surgery and stitches. The conveyor's guard had been moved away at the time of the incident.",1
An employee was standing between two vehicles at a car wash. She asked a customer to drive around the vehicle in front of her. The vehicle drove forward and pinned the employee between two vehicles. Her right leg was broken.,1
"An employee was working from a ladder (half an extension ladder placed against a wall), sealing around a wall penetration. The ladder slipped and the employee fell 8 to 10 feet to the ground, suffering a laceration to the inside upper arm.",1
"An employee was stepping out of a truck when they missed a step and fell, resulting in a femur fracture.",1
An employee was working on a chicken litter manure scraper when his ring and little fingers became trapped in the chain belt resulting in amputations at the first joint.,1
"An employee was grinding on metal knee boards with an angle grinder. The grinding disc shattered, striking the employee. The employee sustained bilateral shin fractures.",1
"An employee was placing a magnetic plate onto a metal table when his left index finger became caught between the plate and the table, resulting in a partial amputation to the finger.",0
A discharge chute fell off a 60-inch mower. The employee got off the mower to reattach the chute when the mower blades lacerated her left hand. She was hospitalized.,1
"An employee leaned on a guard rail that failed and then fell to the ground, causing fractures and dislocations to the legs and feet as well as a concussion.",1
An employee was connecting studs to the ceiling when he stepped through a studded wall into the opening of a stairwell without flooring. The employee fell approximately 10 feet to the basement floor and sustained a right humerus fracture that required surgery.,1
An employee was in a bucket truck trimming a tree with a chainsaw. The chainsaw cut the top of their right hand. The employee was hospitalized and required surgery.,1
An employee was cutting angle stock on a band saw when the blade amputated their thumb.,0
"An employee was talking to another employee in the dock area when a forklift passed by. Product fell off the forklift and onto the employee, resulting in a left hip injury.",1
"An employee was operating lumber machinery when the blow pipe became clogged. The employee went to clear it by opening the flow meter. While removing the cover that acts as an air seal, their left middle, ring, and little fingers were amputated by the moving parts of the machine.",1
"An employee was pushing a rolling trash can around the east side of the building. While coming down the stairs, the employee lost her balance and fell down multiple concrete steps. The employee sustained injuries to the hand, shoulder, neck, knee, and head that resulted in bruising and lacerations.",1
"An employee was moving chemical storage cabinets. As he was pushing a cabinet back into place, his thumb was positioned between the frame and the door. The door closed, amputating the tip of his left thumb.",1
"An employee was walking from the dish room area to the server area when they slipped on water and fell. The employee's left leg bent outward and back and the employee struck his head on a chair. The employee sustained a left tibia fracture, an anterior cruciate ligament tear, and a concussion.",1
An employee was operating a pallet jack in a warehouse when they fell from the vehicle to the concrete floor and sustained a left hip fracture.,1
An employee was exiting the cab of his truck when he lost his footing and fell to the ground. The employee sustained two fractures to the right foot/ankle.,1
An employee was transferring a patient from a chair to a bed and strained their back.,1
"An employee was sitting at a dining room table when a resident poured water on her. As the employee stood up, she was pushed, causing her to slip in the water and fall to the floor. The employee sustained a femur fracture.",1
"An employee was operating a riding lawn mower to mow the grass when the mower flipped over, ejecting the employee and pinning them underneath. The employee sustained fractures to the left ribs, shoulder, and arm.",1
"On May 29, 2023, an employee was making a 180-degree turn to align his forklift with the motion sensor on the door of the perishable warehouse. Their forklift struck another stationary forklift and the employee's left ankle was punctured by the raised forks of the stationary forklift.",1
"On May 29, 2023, at around 2:00 PM, employees were rehearsing for a stunt. The injured employee was on the teeterboard when one of the launching cast members bumped into him causing the injured employee to be unbalanced upon takeoff. He was about 5 to 6 feet in the air when he fell to the floor, landing on his neck and shoulders. The employee sustained a C7 vertebra fracture.",1
An employee arrived at a location to sell mobile phones to customers when they were shot in the lower right abdomen by an unknown person who was not an employee. The employee sustained intestinal damage and a hip fracture that required hospitalization.,1
An employee was taking care of a resident when they were kicked in the abdomen. The employee fell backward and struck her head.,1
"An employee stepped onto a truck and was detaching a hydraulic hose when he slipped and fell to the ground, sustaining a fractured hip.",1
"The injured employee stepped off his standup forklift when a second standup forklift struck the injured employee's operator compartment. The employee's right hand was pinned between the two forklifts, resulting in a crush injury.",1
"An employee was offloading a vessel. As the employee went to remove a strap hanging from the bottom of the load, the load shifted and crushed the employee's left thumb. The employee's thumb tip was surgically amputated.",0
"On May 29, 2023, an employee was working on an ammonia compressor thermal siphon. When relieving the pressure, it released an ammonia cloud. The employee was hospitalized for breathing and swallowing difficulties as well as eye blurriness.",1
"An employee was using an A-frame ladder to repair a soffit. As they were descending the ladder, they missed a step, and their leg became entangled in the ladder. The employee fell, resulting in a left tibia and fibula fracture.",1
Employees were setting up to offload an aircraft. The injured employee was standing near a baggage tractor by the right wing of the plane. A belt-loader was being driven from the nose of the aircraft to the aft when it struck the parked baggage tractor. The injured employee was pinned between the belt-loader and the baggage tractor and sustained a dislocated left knee.,1
"An employee was working on a 6-inch jointer in the cabinet and doors building when their glove was caught in the machine. The machine pulled the employee's glove in, resulting in the amputation of the right middle and ring fingers.",0
"An employee was operating a pallet jack and making a turn. As she was backing up to complete the turn, the employee's left foot was caught between the vehicle and a pole, resulting in a fracture.",1
"An employee was operating a golf cart on a golf course. As he drove out of the parking lot, he was struck by a vehicle coming into the parking lot. The employee sustained an ankle fracture that required surgery.",1
"An employee was cleaning an oven push pan conveyor belt. While cleaning the top of the conveyor belt, the pan pusher activated, causing it to move and strike the employee's leg and pin it against the conveyor belt track. The employee was hospitalized and had surgery.",1
"An employee was working overhead to install a hoist system to lift the dumbwaiter. As they stepped onto the dumbwaiter, they fell 13-15 feet to the bottom of the hoist way, resulting in bruising and lacerations to the left hand, a middle finger fracture, and a laceration and compound fracture to the right ankle.",1
"An employee was changing a belt when their fingers were caught between the belt and pulley, resulting in the amputation of three right-hand fingertips.",0
"An employee was moving a box when his leg struck a cart, causing him to fall to the ground. He sustained a fractured hip that required hospitalization.",1
"An employee was replacing a furnace control board. As he began to unscrew the low voltage wires on the circuit board, the employee experienced an electric shock through his left hand that required hospitalization.",1
"A temporary employee was operating the corn/chip cutter when the piston released and moved upward, causing her hand to become caught in the machine. The employee sustained multiple fractures in the hand that required hospitalization.",1
"The employee had clocked out for the day and was leaving the facility. As the employee was going down an exit ramp to the parking lot, their wheelchair struck a bump and the foot plate became jammed. The employee was ejected from the wheelchair onto the concrete/pavement and sustained a hip fracture.",1
"An employee was removing the lid of a chemical tote container. The cut tote lid fell into the tote, causing the chemical to splash onto the employee. They sustained chemical burns to the back of their neck and shoulders.",1
"An employee was flipping a structural beam in the paint bay area so that it could be painted on the opposite side. The beam was sitting on a set of horses roughly 18 inches off the ground. When the employee used the overhead crane to pick up the steel beam, it flipped off the horses and onto his right foot. The employee's right big toe was amputated.",0
"An employee was walking underneath a silo when he tripped. The employee reached for a head pulley gear box and his finger became caught in the belt, resulting in a degloving injury that required medical amputation of the right middle fingertip.",1
"An employee was using a cart to transport a 400 frame motor armature weighing 450 pounds. While moving the armature on the cart, the wheel struck an anti-fatigue mat, causing the cart to tip backward. The armature fell and pinched the employee's right big toe between it and the floor. The employee's right big toe was lacerated and required stitches and hospitalization.",1
An employee was placing a cut of meat on the platform of the band saw when her right hand contacted the blade. The employee sustained a severe right hand laceration one inch from the bottom knuckle of the right thumb through the middle of the palm.,1
"An employee was performing work tasks when he was struck by a vehicle that was pulling into the auto center for repair. The employee sustained tears to their left anterior cruciate ligament, medial collateral ligament, and posterior cruciate ligament, as well as a popliteal laceration.",1
"An employee was at the time clock area when they lost balance and fell to the floor, resulting in a hip fracture.",1
"An employee was walking into work when she twisted her ankle and fell to the ground, sustaining a patella fracture.",1
"An employee was operating a machine that pulls compost along a wooden bed. As they went to clear something from the machine, their finger became caught between the rope and the drum cylinder, resulting in a partial finger amputation.",1
"An employee was climbing a fixed ladder to access a dust collector on a silo. As the injured employee handed paperwork to another employee standing on the platform, the injured employee lost their footing and fell 13.5 feet. They sustained a laceration to the back of the head, compression fractures to T-12, L-1 and possibly L-2 vertebrae as well as left ankle and thigh pain.",1
"An employee had been hosing down the coils of an HVAC unit on a roof. He was going up or down an extension ladder when the foot of the ladder slipped on the wet concrete/asphalt ground and the employee fell to the ground. The employee sustained a fractured rib, fractured foot, knee strain, and a possible fractured wrist.",1
"An employee was removing wood from the waste conveyor when they tripped and their left hand became caught in the conveyor sprocket and chain. The employee's little, ring, middle, and index fingers were amputated.",1
An employee was cutting a piece of wooden trim with a circular saw and amputated a finger.,0
"An employee was cutting cables with the alligator shear. As they were feeding cables into the shears, their right thumb was amputated.",1
"An employee was adjusting a two-inch solid block that had fallen over during transport from the kiln to the loader/unloader. The employee lost their balance and their left hand was caught in the transfer track, resulting in fractures to the fingers and hand.",1
"An employee was loading animals when they became pinned between an animal and a chute, resulting in the partial amputation of the left middle finger.",0
"An employee was walking through the dock when they were struck by a forklift, resulting in a left ankle fracture.",1
"An employee was putting bungees on a trailer when a forklift backed over the employee's left leg, resulting in a crush injury.",1
"An employee was going into a building to grab a tagline when they tripped over the cross bar of a scaffold and fell, resulting in a rib fracture.",1
"An employee was shearing sheet metal. As the employee pushed and held a piece of sheet metal in the machine, the clamp came down and caught the employee's finger, amputating the tip.",0
"An employee was attempting to remove a cut section of concrete roof slab when the catch plate and anchor bolt gave out. The cut section of concrete then fell and struck the employee's upper back, causing him to fall to the ground. They sustained 5 broken vertebrae.",1
An employee was pulling wire when he felt a pull in his back. The employee was hospitalized for a herniated disc.,1
"An employee was preparing steel support rails to be adjusted to the correct elevation in a hangar. The steel angle fell approximately 4 feet and struck the employee's left forearm, resulting in swelling.",1
"An employee was walking on a stretch trailer deck, checking that the previously laid out rigging placement marks were visible on the girder. He stepped off the deck of the trailer between the two sections and sustained a left leg fracture.",1
An employee was picking up tools and debris from a job site when a pickup truck drove off the road and struck the employee. They sustained a broken leg and a back injury.,1
An employee was applying a sealant to screws and seams of a low-pitched metal roof and fell from the roof to the ground. The employee sustained fractures to their right heel and lower back above the tailbone.,1
"An employee was walking through the shop when they tripped over a cable protector and fell to the floor, fracturing their right hip fracture.",1
An employee was increasing the regulator in the wall-mounted suction of the radiology department when they struck their head on the C-arm. The employee sustained a subdermal hematoma.,1
"An employee was spotting a vehicle during material placement when they were struck by a powered industrial vehicle, resulting in lacerations and a foot fracture that required surgery.",1
"An employee was repositioning a part on a cloth robot machine. When the part was moved into position, the machine cycled and the employee's finger was caught in a pinch point, the gripper of the press, causing a fingertip amputation.",0
An employee was on an A-frame step ladder removing safety debris netting from an 8-foot-tall construction fence. The employee fell from the second rung of the ladder and sustained a back injury between the shoulders and a left shoulder injury.,1
"An employee was operating a punch press in a seated position. As he stood up, the machine cycled, resulting in an amputation to a finger on his right hand.",1
An employee was performing customer service duties when they became dizzy. The employee was hospitalized for heat exhaustion.,1
An employee was repairing a post-tension tendon when their right index finger was amputated and their right middle finger was lacerated.,0
An employee was in a man basket attached to a forklift making adjustments to a ride when their finger was caught between the forklift load backrest and the pipe that was being lifted. Their fingertip was amputated.,0
"An employee was loading vehicles on a car hauler. While he was on the top level, he slipped and fell, landing with both feet on the ground. The employee sustained a right ankle fracture.",1
An employee had stopped on the side of the road to secure the open tool box in their truck bed when the wind blew the truck door closed on their hand and partially amputation their left ring finger.,1
"An employee was using a hydraulic excavator with a hammer attachment to demolish part of a bridge. The excavator was on concrete ground and there was a gap where the debris from the demolition would fall between the vehicle and the bridge. The hammer attachment got caught in the concrete and pulled the excavator off the ledge, causing it to fall 6-8 feet to the concrete debris below. The operator sustained a left shoulder dislocation and a vertebral fracture.",1
An employee was shot by a customer.,1
"The employee was lowering a trailer hitch onto the receiver ball to connect the trailer to the truck. During the alignment, the trailer moved, causing the employee's finger to become caught between the trailer and the receiver ball. The employee's middle finger was partially amputated.",1
An employee was delivering packages when they began to fell ill and experienced muscle cramps from heat exhaustion.,1
"An employee was loading an excavator onto a trailer. As they were placing blocking under the bucket, their hand was crushed by the excavator tilt rotor piston.",1
"An employee was climbing an extension ladder when they fell to the ground, sustaining a pelvic fracture.",1
"The employee was inspecting the interior of the armored vehicle. As he closed the side door of the vehicle, his left index finger got caught in the door, resulting in a fingertip amputation.",0
"An employee was using a machine to weigh a product when he noticed the weight was incorrect. The employee opened the machine to check the gasket and while his hand was on the piston, the machine was activated and amputated the employee's middle fingertip.",0
An employee was inserting metal into a roll machine when their right index finger was caught and amputated.,0
"Employees were pulling cables through a stationary unit under the 200-pound battery storage tray. The injured employee's hand was on top of the battery tray to assist with the cabling. The tray was sitting on the frame and had not yet been secured in place and was cantilevered. The tray tipped and slid down toward the employee's foot pinning it against a nearby part, causing a compound fracture of the right tibia.",1
"An employee was operating a forklift to take a load of aluminum foil pans from a warehouse storage location to have them shipped. The operator turned, causing the load to fall on the injured employee's back.",1
An employee was performing maintenance on a boring machine when their finger was pinched and partially amputated.,0
"An employee was outside taking a break on a retaining wall by an argon gas tank. Upon standing up, the employee became dizzy and fell 4 feet, 3 inches off the retaining wall onto the concrete. They sustained a right clavicle contusion and fractures to ribs 3-8 and 10. The employee was hospitalized.",1
"An employee was welding a gas tank on a truck when the tank burst into flames. The employee sustained burns to his back, arms, hands, and neck.",1
An employee was descending a stock ladder cart when they fell to the floor and sustained a left tibia fracture that required hospitalization.,1
An employee was walking between aisles to pick parts for a delivery when her foot caught the edge of the anti-fatigue mat and she tripped and fell to the floor. She sustained a left hip fracture.,1
"On June 1, 2023, an employee was removing the motor from a dust suppression machine. The hydraulic bottle jack lift slipped from under the subframe of the machine, causing the subframe bar to lacerate and fracture the employee's left arm.",1
"A temporary employee was operating a utility vehicle when they were struck by a vehicle, resulting in hospitalization.",1
An employee was delivering mail to a home when he fell and sustained an eyebrow laceration and right-side stomach pain from contact with the ground.,1
An employee was using a jib crane to move a piece of steel from his workstation onto a forklift. The employee lifted the material about 2 feet off the table. The tack welds broke and the steel dropped onto the employee's fingertip. The fingertip was amputated.,0
"An employee was working as part of a landscape crew, picking up debris, when they became ill and disoriented due to possible heat exhaustion or heat stroke.",1
"An employee was working on a malfunctioning truck. The truck's hydraulics lost pressure and the truck moved forward, running over the employee's right leg with the tire. The employee sustained a broken leg.",1
"An employee was in front of a hospital loading a six-foot step ladder and hose into a UTV. The step ladder slid onto the accelerator, causing the vehicle to strike a column and bounce back into the employee. They sustained several rib fractures and pneumothorax.",1
"An employee was troubleshooting a hydraulic piston on the wheels of a semi-trailer dump truck. The piston released and caused the trailer to move, crushing the employee's leg. The employee sustained fractures and contusions.",1
"An employee was on stilts to hand drywall at the first levels of the new apartment project. While moving to hang another sheet, his stilts became tangled in a wire that was located near the floor. He fell through the stud wall and right forearm was cut by a metal stud, resulting in hospitalization and stitches for the laceration.",1
"An employee was observing the drum area of a plant. They bumped the drum to make it spin. A pipe cracked and released liquid asphalt, causing the employee to sustain a second-degree burn to the right arm.",1
"An employee was removing a shaft from a ship. When the shaft came free his little finger was crushed between the shaft and another piece of equipment, resulting in a fingertip amputation.",0
"An employee was cleaning the boat and turtle traps while other crew members were pulling items such as ice chests, paddles/push poles, and the electrical conduit from the boat. The electrical conduit was then leaned against the front of the boat to be washed. The injured employee then got into the boat to help lift a box of nets. To pull the box from the gunwale, the employee exited the boat, and as they did, the electrical conduit suddenly shifted. One fell toward the employee and as it fell, the employee landed on the end of the pole and was impaled. The employee was hospitalized for internal bleeding and required surgery.",1
"An employee was operating an electric pallet jack when their leg was crushed between the jack and a shelf, which required surgery.",1
"An employee and co-workers were moving a skid steer after dropping off material at the end of the day. As the injured employee was backing up the skid steer between two pieces of equipment, the vehicle contacted the hitch of a goose-neck trailer. The employee was hospitalized for a right hip dislocation and fracture as well as a laceration to the right thigh.",1
"On June 1, 2023, an employee was helping inspect a trackside hose when hot flowback water was released from the hose. It sprayed onto the employee, burning the employee's neck, forearm, sides, and back.",1
"At about 6:25 a.m. on June 1, 2023, an employee was welding the door frame of a recycling baler. An overhead gantry crane was being used to move the frame into place, with the latch of the baler attached to the crane. The latch fell and crushed the employee's left thumb against the door frame.",1
"An employee was stacking lumber for a chain conveyor. The employee's gloved finger was caught between the return chain and a guide guard. The finger was pulled into the chain, and the employee suffered a fingertip amputation.",0
An employee was driving their assigned route in a package delivery truck when he began feeling ill and sweating. The employee was hospitalized for heat illness.,1
"An employee was walking in a forklift area. The employee tripped, fell into a rack of stored aluminum stampings, and suffered a laceration to his wrist from one of the stampings. The employee was hospitalized.",1
"An employee was preparing a dough divider machine for operation when their right hand contacted the machine blade, resulting in two fingertip amputations.",0
An employee fell 15 feet from a 32-foot ladder. The employee was hospitalized and suffered one rib fracture and fluid between the membrane of the heart.,1
Employee 1 was operating a ride-on pallet jack. They turned left into another aisle and struck a ride-on pallet jack being operated by employee 2. Employee 1 sustained a laceration to their right heel.,1
"An employee was using a hammer and chisel to dismantle an engine. The hammer missed the chisel, striking the employee's left middle finger and amputating it. The employee was hospitalized for surgery to reattach the finger.",1
"An employee was walking a trail when he tripped and fell, suffering a broken leg.",1
"An employee was preparing to help install a chute to a concrete bucket. The base rim of the concrete bucket came down on the employee's left foot, resulting in a fracture and laceration to the fourth toe and a laceration to the fifth toe. The employee was hospitalized.",1
"An employee was walking with a broomstick when the broomstick slid to the floor. As the employee leaned slightly forward, her hip popped. The employee sustained a left hip fracture.",1
"A broth tank was opened, releasing 7,500 pounds of boiling liquids and solids. An employee suffered multiple burns to the body.",1
"An employee was exiting his dump truck. The truck bed was touching high-voltage power lines, resulting in electric shock and electrical burns.",1
"An employee was separating two pieces of steel tubing from a bundle of four. The tubing fell; the employee's left thumb was caught between two pieces of it, and he suffered a laceration that included a ligament in the thumb. He was hospitalized, requiring surgery.",1
"An employee was scrubbing and cleaning a conveyor belt. When he knelt down to scrub underneath the belt, his hand was caught between the belt and the turn sprocket. The employee's left middle finger was amputated.",1
"On June 2, 2023, at approximately 1:00 a.m., an employee was placing air in a tire. The rim was damaged on the inside due to bearing failure, which caused the tire to come unseated. The tire, rim, and hub blew off from the axle, striking the employee in both legs. The employee sustained a compound fracture to the left leg and a broken right foot; both required hospitalization and surgery.",1
"An employee was operating a riding lawn mower while also using a blower. The lawn mower struck a curb, causing the tire to lift up. The employee fell off the mower and the blade of the mower came down on his right arm, resulting in an arm laceration and a finger amputation.",1
An employee was hospitalized for heat stress.,1
An employee was leaving work on his scooter when he was struck by a car that was entering the parking lot. The employee sustained a left shin fracture that required hospitalization and surgery.,1
An employee was freeing a pipe that was jammed in a chop saw when he slipped and lacerated his biceps and chest on the saw blade. The injury required stitches and the employee was hospitalized.,1
"An employee was lifting a piece of steel with an overhead crane to set down on metal sawhorses. As the employee unhooked the steel and lifted the crane up and forward, the hook and chain pulled one of the steel pieces off the metal sawhorses. The steel piece fell and landed on her left leg, fracturing her femur.",1
"An employee was rolling up the retractable tarp of a dumpster when the tarp retracted and knocked the employee off the dumpster. He fell approximately 4 feet to the ground, striking his head and sustaining a back injury.",1
"On June 2, 2023, an employee was re-installing a repaired valve. When the employee applied pressure to the system to test the repair, air that contained peracetic acid (PAA) residue flowed from the tote filling wan. The employee contacted the PAA mist, resulting in hospitalization for second-degree chemical burns to the face, swelling of the lips and throat, and irritation to the lungs.",1
"On June 2, 2023, an employee was delivering mail when they experienced heat stress.",1
An employee was cleaning the rollers on a paper coating machine when their rag was caught in the rollers and pulled the employee's finger in. The employee's finger was crushed and partially amputated.,1
A forklift was unloading a pallet jack from a rental truck when the pallet jack fell off the raised forks and struck an employee as she was working to steady the load. She sustained a right thigh fracture along with scrapes and bruises.,1
"An employee was putting refractory concrete into the cement mixer when he noticed the clean out door was open. As he went to close the door, his left hand slipped and went inside the mixer and was caught by the mixing blade, resulting in lacerations and fractures.",1
"An employee was walking down the path toward her car at the end of the day when she fell, fracturing her right and left wrist. The employee also sustained a chin laceration.",1
"An employee was unloading a picnic table from a dump truck. As they stepped onto the tailgate of the truck, the tailgate gave way, causing the employee to fall approximately 10 feet to the ground below. The employee suffered a fractured left arm and tailbone.",1
"An employee was replacing siding on a house when his left hand contacted a table saw, resulting in amputation of the ring finger and lacerations on two other fingers.",0
"An employee was walking to the time clock when they slipped on water and fell to the floor, resulting in a left tibia fracture.",1
"Two employees were engaged in a verbal altercation that became physical. The injured employee was struck and fell to the ground, hitting his head on the concrete. The employee sustained a laceration and was rendered unconscious.",1
"An employee was operating an end matcher machine that makes grooves on hardwood flooring and wall/ceiling paneling. The board overlapped and as the employee went to make a correction, his thumb was partially amputated by the blade.",0
"On June 2, 2023, an employee was standing on the mezzanine around the pressure cookers when hot steam and 300-degree grease escaped from the ports. The employee sustained burns to 57% of their body.",1
An employee was cutting pork with a band saw and amputated his left thumb.,0
"An employee was working near high-voltage power lines while completing terminations on underground power equipment in a new subdivision. The employee completed the termination and plugged the elbow into a bushing with an energized transformer. The electricity then contacted the employee, resulting in a burn on his left little finger and burns on both knees that required hospitalization.",1
An employee was bending down working in a team to level a heat exchanger so it could be bolted to the floor. The employee's left little finger was lacerated and crushed as the equipment was lowered down; the employee was hospitalized.,1
"An employee was using a scissor lift to access a shelf. When the employee returned back to the scissor lift from the shelf, he hit his head on an air fan and lost his balance, falling to the ground. The employee suffered a broken left leg and a lacerated right leg, requiring hospitalization.",1
"An employee was working on the blast furnace during his shift. After his shift, he began experiencing cramping and was hospitalized for dehydration.",1
An employee was using a pneumatic bottle jack to remove gear casing when the gear casing fell on his left leg causing a broken femur.,1
"An employee was on a ladder, stocking a top shelf. The ladder began to shake and tip to the side. The employee jumped off the unstable ladder and suffered a broken leg.",1
An employee was walking over a temporary bridge that was put in place while the custodian was waxing the floors when they fell to the tile floor and sustained a head injury.,1
An employee was climbing the steps to get into a tractor-trailer when he slipped and fell to the ground. The employee sustained a right leg fracture that required surgery.,1
"An employee was issuing tactical vehicle system (TVS) kits from a 40-foot shipping container. The employee was facing the container as they were sliding a kit weighing 44 kg to the front opening of the container. The employee lost their grip and began to fall backward when their right foot was caught under the kit, resulting in a right tibia and fibula fracture.",1
"An employee was in a manlift in a test cell setting up an engine when they fell approximately 47 inches to the floor below. The employee sustained fractures and lacerations to his head, requiring hospitalization.",1
An employee was operating a plastic collator when they were struck in the eye by a nail that ricocheted from the machine.,1
"An employee was moving a pallet of merchandise from one location to another. As he was walking backward, the employee's right foot was pinched between two pallet jacks and required surgery.",1
"An employee was signaling for a telehandler to lift a drain pipe using a jib hoist. The pipe was still attached to concrete, causing the pipe to remain in place and the hook of the hoist to swing into the employee's face. They sustained a hairline fracture to the forehead as well as a laceration.",1
"An employee was repairing a conveyor belt when their glove got caught on the belt, causing their left arm to get pulled into a roller. The employee suffered a fracture to their lower arm.",1
An employee was pouring molten metal from a ladle when he began experiencing heat exhaustion and passed out. The employee was hospitalized.,1
An employee was securing a steel gate that had been left open when the gate fell on top of him. The employee suffered a broken pelvis and an injury to his left leg.,1
An employee was walking to the time clock when they tripped and fell to the ground. The employee sustained a hip fracture that required hospitalization.,1
"An employee was walking up to a powered industrial vehicle (PIV) to grab a water bottle. As the vehicle was turning, the employee was struck by the PIV and sustained a spleen laceration and injury to the left arm and chest. The employee was hospitalized.",1
An employee was working on a ladder over a playground stage. The employee fell from the ladder to the stage; he was hospitalized with eight broken ribs and a concussion.,1
"An employee was moving a large part on the paint line when the part shifted and the employee's hand/finger was caught between two parts, resulting in a left little and ring finger fracture and laceration.",1
"An employee was walking in the deli when they slipped on the floor and fell, resulting in an eyebrow laceration and wrist fracture.",1
"An employee was seated in a truck that was being lowered from a tow truck. The employee exited the truck and fell to the ground, resulting in a hip fracture.",1
An employee was slicing a tomato with a slicing machine when they sustained a fingertip amputation on the right hand.,0
"On June 4, 2023, at 10:30 AM, an employee was pushing a garment rack down an aisle in the stockroom when the bumper struck a box located to the left. This caused the employee to stumble and fall resulting in a broken left tibia that required hospitalization.",1
An employee was welding a tack on a tank when an arc flash occurred. The employee was leaving the area when a section of the grating of the steps on the tank fell on his back. He suffered a hip dislocation and partial fracture.,1
"An employee was working in the extrusion department helping another employee remove a stuck ball of aluminum from the rollers of the roll-out table. The hot aluminum ball fell from the table and pinned the employee's leg against the table, resulting in second-and-third-degree burns to the employee's thigh and stomach.",1
An employee was operating a band saw to cut short ribs when his right hand slipped. The employee sustained a laceration on his right index finger near the top of the knuckle. This resulted in an amputation.,1
An employee was walking when they slipped on the floor and ruptured a hernia that was previously surgically repaired.,1
An employee was assembling form panels and adding tension to the bolts when a nearby excavator ran over the employee's left foot. They sustained a fracture.,1
An employee was gathering dough out of an automatic doughball maker and amputated their right middle finger.,0
"An employee was on or above a retaining wall during a hydrovac operation when they fell 8-12 feet to the ground, resulting in a back injury that required surgery.",1
"An employee was cutting meat for a hotel event when the knife slipped, amputating his left little fingertip.",0
An employee was testing a rental electric scooter for a customer when they fell and sustained a left arm fracture that required hospitalization.,1
"An employee was storing tools inside of a metal jobsite box after a lightning alert was issued. The employee was resting his right hand on the edge of the box when the lid closed on his hand, resulting in a right little finger amputation.",0
"An employee was working in the fabrication shop manually fitting a chain for the motor to the fish weir drum drive shaft. The employee pulled on the chain to check the operation when his left little finger was caught between the chain and the sprocket. As the employee pulled his finger free, the left little fingertip was amputated.",1
An employee was using a saw to cut meat when their hand slipped resulting in amputation of their right thumb.,0
"An employee was walking from a back yard to a front yard at a customer's home. He tripped on a brick hidden in the grass of the back yard, fell on his right side, and suffered a broken hip.",1
An employee was on a ladder moving wiring when they were shocked and fell to the floor. The employee sustained injuries to their pelvis and ribs.,1
"An employee had unloaded two motorcycles from a truck carrier. As the employee was removing the carrier rack from the vehicle, the carrier rack fell onto their foot, resulting in a fractured toe. The employee was hospitalized and had surgery.",1
"An employee was threading an ID thread gauge into a part chuck and machine spindle. The thread gauge caught the glove on his right hand and pulled his hand into the spindle, crushing it. The employee was hospitalized with contusions and lacerations.",1
An employee was operating a plastic injection molding machine when the tips of their fingers were amputated.,1
An employee was preparing to remove a 900-pound roll from an extrusion machine. The roll fell off and the employee sustained an arm fracture that required hospitalization.,1
"An employee was blowing out a surge bin on a blow mold machine for a material changeover. When he went to clear material out of the top rotary air lock area, it opened and closed on his middle three fingers. The right ring, middle, and index fingers were amputated. The ring and middle fingers were surgically reattached.",0
"An employee was unloading a delivery truck and lowering the lift gate. As the employee went to open the lift gate flap, their right index and middle fingers were caught and amputated.",0
"An employee was operating a pallet jack and staging a pallet of product on the floor next to storage racking. The employee backed the pallet jack out of the pallet and was turning around in the aisle when the pallet jack impacted the racking. The first level of the racking was above the operator's compartment of the pallet jack. Upon impact, the employee was pushed forward within the operator's compartment and pinned against the racking. The employee sustained a fractured sternum.",1
"An employee was prepping an area for excavation in order to install underground conduits. The employee was picking up the access ladder for relocation; the end of the ladder has a pivot point where a bracket mounts to the building. When the employee set the ladder on the ground, the pivot point was in the down location, setting the ladder end off the ground. The ladder shifted, swinging the pivot end down and the employee's hands were pinched in the ladder, resulting in an amputation of the left middle fingertip.",0
An employee fell off the back of a box truck and sustained an elbow fracture.,1
"An employee had just placed a box and bag into a packaging machine and cycled the machine. The employee noticed that the bag was crooked and went to stop the machine. As they straightened the bag, the sealing bars of the machine closed onto employee's right middle finger and amputated it.",0
"An employee was de-tensioning the tracks from a hydraulic coupler end of a tractor. As the employee removed the coupler end, it blew off, causing oil to inject into the employee's left arm.",1
"An employee was waiting on a natural gas well to vent after performing maintenance. A cigarette was lit, causing a flash fire. The employee was hospitalized for burns to his face, hands, and the top of his head. The employee also sustained lung damage.",1
"An employee was working on a neighborhood electrical outage that occurred from a car crashing into an electrical transformer. As the employee went to de-energize the lines, something in the transformer made contact with the injured employee. The employee was hospitalized for electrical burns from the electric shock.",1
An employee was cutting a pallet with a grinder when it jammed and kicked back into his right hand. The employee sustained three fractures and two lacerated tendons.,1
"An employee was using a rag to clean a switchgear. As the employee was back feeding building power, the main breaker closed, resulting in the back feed of the grid. The employee was shocked.",1
"An employee was setting up a cable loop machine and training employees on the set-up procedures. As the employee loaded product, the clamp closed on their left hand and amputated their index finger. The employee had surgery.",0
An employee was sitting in their chair when a large cork board fell off the wall and struck her head and left arm. The employee sustained a concussion.,1
"An employee was coming down a ladder when the ladder shifted. As he turned his upper body to regain his balance, he suffered a muscle strain, but did not fall. The employee was hospitalized for an abdominal wall hematoma/abdominal aortic aneurysm.",1
An employee was changing a cartridge on an epoxy gun. The employee used a razor knife to cut the cartridge tip and amputated their little fingertip.,1
An employee was shot in the abdomen and sustained an exit wound to the lower back. The employee was hospitalized.,1
An employee was weed whacking a lawn when a rock was ejected from a nearby lawn mower. The employee was struck in the face and sustained facial fractures.,1
"An employee was using a 6-foot aluminum/fiberglass step ladder to change ceiling tiles when the ladder tipped over on its side, causing the employee to fall and impact a nearby wall and the ground. The employee sustained a back injury.",1
"An employee was walking on scaffolding when a plank broke, causing the employee to fall approximately 13 feet to the ground. The employee sustained a left arm and leg fracture.",1
"An employee was using a rotary saw and lacerated their left index and middle fingers, resulting in an amputation that required hospitalization.",1
"An employee entered a milling machine to diagnose a problem with an airline leak when the machine actuated and pinned the employee between the door and the milling table. The employee sustained a left hip dislocation that required surgery, a left arm fracture, and multiple lacerations and bruises along the left side of the body.",1
"An employee was operating an extruded polystyrene foam (XPS) block downcutting apparatus to cut 4x4x8 foot XPS blocks into smaller sections. The 240-volt electrical wire disconnected from one side of the downcutting apparatus. As the employee went to reconnect the wire, he was shocked, causing him to fall approximately 30 inches to the production area floor. The employee sustained an electric shock to the left hand/arm and a possible left shoulder injury from the fall.",1
"An employee was conducting accountability checks and noticed a student was still awake. When the employee reminded the student of the lights-out policy, the student punched the employee. The employee was hospitalized with a concussion, facial fractures, orbital fractures, and dental fractures.",1
"An employee was re-banding defective packaging of lumber product. As he cut the defective banding, the pack shifted and crushed his finger. The employee's left index finger was amputated just below the fingernail.",0
"An employee was cleaning a dock when a truck driver backed into the dock and struck the employee, pinning them between the truck and the dock. The employee suffered internal bleeding and a pelvic fracture.",1
An employee was measuring a log on the saw machine carriage when his right index finger became wedged between the log and the end stop of the machine. The employee's right index fingertip was partially amputated.,0
"An employee was using a forklift to unload aluminum rectangular tubing onto storage racks. The tubing became stuck and the employee got off the vehicle to manually unload the tubing from the forklift. The tubing ricocheted off a storage rack, struck the bottom of the forklift, and then the employee's left hand resulting in a middle fingertip amputation.",1
An employee was cleaning and painting tanks in the company yard when they began to experience symptoms of heat exhaustion and dehydration.,1
"An employee was standing on a bale of hay to pull a separate bale of hay from the top of a semi-truck bed for a customer. The bales of hay were held together by metal baling wire. When the employee went to undo the bale, the metal baling wire broke, causing him to fall off the hay bale and land on his left hip. The employee suffered a broken left hip.",1
An employee was using conduit poles to roll heavy equipment onto a trailer. He was re-adjusting the poles when his right index finger was pinched between the conduit poles and the floor of the trailer. The fingertip was amputated.,0
An employee was performing maintenance on a pump. He was assembling a stuffing box onto the fluid end assembly when the box shifted and pinched his right middle finger resulting in a displaced fracture of the distal phalanx and an incomplete amputation.,0
"An employee was moving a large, metal, round table out of a moving truck. As the employee went to roll the table off the truck, he fell off the truck, and the table fell on his head, resulting in hospitalization.",1
"An employee got into an altercation with a co-worker, resulting in a broken jaw.",1
"An employee was walking on the production floor when they slipped and fell, striking their right leg on a metal conduit running through the floor. The employee's right lower leg was broken.",1
"An employee was using a forklift to deliver rebar to a jobsite. The rebar could not fit through the delivery gate and was raised in order to clear the gate. The rebar then caused the forklift to tip forward, causing the employee to strike his head on the roll cage. The employee sustained a neck fracture.",1
"An employee was moving concrete forms when they slipped and fell onto one of the forms behind them, resulting in a puncture wound.",1
"On June 6, 2023, employees were operating a slitter machine when the injured employee observed a piece of plastic shim hanging from the machine. As the employee went to remove the shim, the machine released a roll of product onto the arbor, trapping the employee's right hand and amputating the middle fingertip.",0
An employee was handling a carbon steel part with an overhead crane. The part fell onto their foot causing injury to the tip of a toe. The employee was hospitalized.,1
"On June 6, 2023, an employee was warming up a mill when his left hand was caught in the mill, resulting in amputations to his fingertips.",1
"An employee was webbing paper through the paper pull wheel of a machine when his left index finger went between the upper and lower wheel, resulting in a fingertip amputation.",0
"An employee was sorting parts for shipment. He reached to catch a part that had dropped from a cutting machine when his fingers contacted the machine, resulting in multiple fingertip amputations.",0
"An employee was walking when a forklift carrying a 31-foot long, 7,000-pound steel support column ran them over and crushed their leg. The employee suffered blunt force trauma and amputation of his right leg from the knee down.",1
"An employee was installing a plate on the side of a transmission. While holding the plate in place with their left hand, the employee went to seat the plate by hitting it with a rubber mallet. His left middle finger was struck by the mallet resulting in partial amputation of the finger. The fingertip was reattached.",1
An employee was operating a band saw to cut plastic scrap when his left middle fingertip was amputated.,0
An employee was carrying totes when they tripped over a patient lift. They were hospitalized for a hematoma on the right thigh.,1
"On June 6, 2023, an employee was operating a table saw to cut a 2x12 piece of wood. The wood kicked back, causing the employee to suffer an amputation to the left hand.",1
"An employee was assisting with installing meter runs. While adjusting straps on a piece of fabrication, the piece shifted and rolled onto the employee's foot, resulting in fractures.",1
"An employee was using a portable, battery-powered circular saw to cut plywood boards when they sustained a fracture and laceration to their left hand. The employee was hospitalized.",1
An employee was moving boxes and sustained a lumbar strain.,1
"Employees were using a dolly to remove a trash compactor unit from a residential home. As they began to transport it out of the room and to the outside, the dolly encountered uneven ground. This caused the dolly and the unit to move quicker than expected. The injured employee's left hand was then caught between a nearby concrete column and the compactor unit, resulting in fractures of the left ring and middle fingers that required amputation.",1
"An employee was changing a transformer. When removing wiring, an arc flash occurred and the employee was burned on their right arm from their elbow down to their hand.",1
"An employee was covering a machine when they fell through a hole in the floor, resulting in bruises to their lungs and ribs.",1
"On June 7, 2023, an employee was using a cleaning product to clean a dishwasher and then used a bleach spray. The employee began to suffer an irritated upper respiratory system and was hospitalized.",1
An employee had been performing breaker installation when an arc flash occurred and the employee sustained burns to their face and body.,1
"An employee was aligning a bolt hole to reinstall a control arm on a car. A post jack slipped and cut his left index fingertip, resulting in a partial amputation.",0
"An employee was using a press machine to cut pieces of aluminum when the press came down and crushed his left-hand fingers, resulting in two lacerated fingers and amputation of the little finger.",1
"An employee lifted a trailer with a jack so they could replace an airbag. The jack slipped out from underneath the trailer, catching and amputating the employee's left thumb and index finger.",1
"An employee was spraying an overhead wasp nest in an apartment complex when she stepped in a depression in the ground and fell, resulting in a broken ankle and dislocated elbow.",1
An employee was walking into the breakroom when she collided with a cart and fell to the floor. The employee sustained a hip fracture.,1
"An employee was standing outside of his truck waiting for a load when a forklift dropped a pallet of plywood onto the employee, resulting in fractures to their lower body.",1
"An employee was attempting to secure the legs of a grout silo that was being moved by a telehandler. The employee's left index finger was positioned inside one of the retainer pin holes and as the operator lowered the silo, their fingertip was crushed and amputated.",0
"An employee was on top of a 2-by-4 purlin installing rafters. The purlin broke and he fell to the ground about 16 feet below, suffering a broken left femur.",1
An employee was operating an electric pallet jack to retrieve pallets when the pallet jack struck the back of a parked car. The employee's right tibia and fibula were fractured.,1
"On June 7, 2023, an employee was walking through the facility when she slipped on a piece of turkey fat and fell, fracturing her ankle.",1
"An employee was offloading 140-degree hot tar from a tanker truck. The seal on the pressure relief valve failed and hot tar struck the employee's face, resulting in burns.",1
An employee was transferring/unloading merchandise using a push cart/dolly when their finger was caught between the cart and the cart rail. Their right ring finger was amputated.,1
"An employee was strapping down a load of lumber on their truck. The employee was standing on the ground when he fell to the same level, landing on his back and hitting his head. The employee was hospitalized with a collapsed/punctured lung.",1
"An employee was making a delivery to a customer when he slipped and fell on the ground, resulting in hospitalization for a broken arm.",1
"Two employees had just completed attaching lift straps to a 6,000-pound steel C-channel bundle and 20-foot spreader bar and had connected it to a 45-ton forklift. As the forklift began to lift the load, the C-channel bundle shifted and the injured employee was caught between the bundle and the wall of the gondola train car from which the load was being removed. The employee sustained a possible pelvis fracture.",1
"An employee was making a delivery when they bumped into a metal forklift attachment. The attachment fell over and struck the employee's leg, resulting in a fracture that required surgery.",1
An employee was sorting wooden pallets into stacks based on quality. A reversing forklift ran over the employee's foot resulting in a crush injury requiring hospitalization.,1
"An employee was lowering the dock plate after finishing a delivery when his thumb was caught between the plate and the dock, resulting in an open fracture.",1
"Employees were erecting scaffolding outriggers for masonry workers. The injured employee was on the sixth floor of the scaffolding, preparing to do masonry work. He stepped forward onto outrigger planking. The planking rolled from beneath him and he fell through an opening that was created when the planks moved and landed on the ground below. The employee sustained a punctured lung, a liver laceration, and fractures to their ribs, pelvis, and right wrist.",1
An employee was replacing a fitting on a water jet machine when the pressurized water jet lacerated their right palm/hand.,1
"On June 7, 2023, at 10:00 PM, an employee was attempting to identify an operational issue with a rubber biomass boiler conveyor and the scraper on the bottom of the conveyor. Power to the conveyor was shut off and he removed a metal guard and set it down on a nearby catwalk. The employee tripped and braced himself on a nearby bearing housing. The bearing housing shifted when power to the conveyor was lost and the employee's right hand was pinched between the conveyor enclosure and the bearing housing, resulting in fractures to his wrist and a compound fracture of the first finger.",1
"On June 7, 2023, a residential construction crew was setting trusses. As the injured employee began descending the ladder they were on, their foot was caught on a rung, causing the employee to fall approximately 4 to 5 feet to the concrete surface below. The employee sustained a head injury.",1
"An employee stepped onto the access ladder of a roof hatch and fell, resulting in a broken right ankle.",1
"On June 7, 2023, an employee was welding a brace on the end of a 45-foot long bridge pylon/pile. The bucket of an excavator rotated and struck the bridge pylon/pile, causing the employee to be struck in the chest by the pylon/pile. The employee was hospitalized with five broken ribs and a punctured lung.",1
"An employee was on an 8-foot step ladder receiving an electrical conduit through a wall. The wire assist for the conduit broke, causing the employee to fall approximately 3 feet. The employee sustained a hip fracture that required hospitalization.",1
"An employee was operating a battery changer. While backing the equipment up, the employee's ankles were pinned against a piece of racking.",1
"Two employees were removing a clamp from the top of a pipe spool. The pipe fell and then shifted sideways, trapping one employee's thumb. The sleeve around the outside of the insulated pipe caused a crush injury to the thumb, resulting in a partial degloving.",1
"An employee was standing on a pallet when it broke, causing him to fall 3 feet to the floor and sustain a left hip fracture.",1
"An employee was climbing down from a trailer when he lost his grip and slipped. His leg struck the trailer hitch, resulting in a leg fracture.",1
"An employee was mowing grass. As she stepped off the lawn mower, the employee slipped on wet grass and the lawn mower ran over her left ankle, resulting in a fracture.",1
"On June 7, 2023, employees were unloading a box truck and rolling a reel of 2-inch plastic pipe to the back of the truck. As the employees were rolling the reel, the edge of the steel frame of the reel contacted the side of the truck. The injured employee’s right little finger was caught between the reel and the truck, resulting in a laceration and fracture as well as a little finger amputation.",0
An employee was working outdoors removing wire from a PVC building when they began experiencing cramping. He was treated for heat exhaustion and dehydration.,1
An employee was inspecting a bottle filling machine and attempting to remove the filter when a stainless-steel strainer flew out of the machine and struck him in the lower extremities. The employee fell to the ground and sustained fractures to both legs.,1
An employee was moving scrap pipe from a pile to a machine when their left hand was crushed between the pipe and the backstop of the machine. The employee sustained a fracture to his left hand.,1
An employee was walking through the maintenance bay when she tripped and fell to the floor. The employee was hospitalized with a dislocated femur and a left acetabular fracture.,1
"An employee was positioned in a tree approximately 40 feet above the ground while removing the tree. The employee lost his positioning and fell to the ground below, resulting in broken bones, including a broken hip. The employee was wearing personal protective equipment at the time of the incident.",1
"An employee was cleaning sludge out of a fire suppression system pipe using a pressure washer. They withdrew the pressure washing wand from inside the pipe and it projected water onto their left hand, resulting in a laceration on the palm between the middle and ring fingers.",1
"An employee was cutting cardboard sheets into strips using a shear press. The plate that holds the cardboard in place while the shear cuts it crushed the employee's left middle and ring fingers, resulting in medical amputation of the fingertips.",0
An employee was working at an inserting machine that places inserts into newspapers. The employee was correcting a jam by removing material from the gripper when the machine restarted. The employee suffered an amputation of their left index fingertip.,0
An employee was unloading batteries during a delivery to a customer when he began to feel severe pain and cramping. The employee was hospitalized for heat exhaustion.,1
An employee was removing a hose from a tank car containing hot wax. Wax spilled onto the employee's forearms causing burns that required hospitalization.,1
An employee was moving a paper roll that weighed 487 pounds when it rolled over her foot causing a fracture.,1
"An employee was carrying hand tools while descending a ladder when he fell and impacted a 2x4 on the ground with his chest, right hand, and wrist. The employee suffered a fractured right wrist and a fractured rib.",1
"An employee was replacing the rollers on a machine. When the machine was jogged, the employee's left little finger was partially amputated.",1
An employee was operating the rear lift gate on a delivery truck when their toes were crushed between the lift gate and the frame of the truck. The employee was hospitalized.,1
"An employee was assisting a client to their room when they were pushed by the client. The employee fell and struck their head on the floor, sustaining a concussion and a small laceration to the head.",1
"While in a patient's room, an employee's left foot caught on the cardiac monitor cord. She fell on her side and sustained a fractured left hip.",1
"An employee had just finished servicing an aircraft and was returning to the warehouse via the aircraft ramp when they were struck by a command loader's transition deck and knocked to the ground. A support wheel from the transition deck ran over the employee's left hand, resulting in injuries to the left hand and an index finger amputation. The employee also sustained a leg injury.",1
An employee had been putting product away in a freezer kept at negative 10-degrees Fahrenheit. At the end of their shift the employee had pain and discoloration in their feet and toes. The employee was hospitalized with frostbite in both of their big toes.,1
An employee was spreading fabric on a spreading table and sustained a partial amputation to the left thumb just above the knuckle. The employee was hospitalized.,1
"A nurse was tending to a patient when she turned to walk away and her foot got caught in tubing, causing her to fall on her right side. She suffered a fractured hip that required hospitalization and surgery.",1
"A mechanic was spotting for a crane that was lowering an engine onto a frame. As the employee cleared the threads of the engine mount, the weight of the engine shifted, amputating his left index fingertip before the first knuckle.",1
"On June 8, 2023, an employee was using his right hand to close the trifold liftgate of a box truck when his left little finger got caught between sections of the gate. The employee's left little finger was partially amputated.",0
A temporary employee was driving a reach truck. While making a turn down an aisle the employee's left arm was pinned between the reach truck and racking. The employee was hospitalized with a broken arm and a hematoma.,1
"An employee was pouring concrete into a 400-foot-long soffit. The employee cut it to the right length and put cables to hold it in place in the prestress bed. He also laid 3 feet of cable behind the soffit. As the employee held onto a piece of cable, it popped out. He let go of the cable and reached inside the soffit. The employee's right index fingertip was pinched between the steel strand chucking device and a stationary steel abutment. The employee suffered an amputation to the right index finger.",0
"An employee was working on a washer. He was standing behind the machine and walked through the hydraulic absorbent pad. As he walked around the machine he slipped and put his hand down to brace himself. The employee contacted the machine's belt and pulley, resulting in a hand injury. The machine was not guarded at the time of the incident.",1
"An employee was grinding a pipe that was on a rotator when his right hand got pulled between the rotator and the pipe, resulting in broken bones in his hand and wrist.",1
"An employee was loading a steel bar into a thread-rolling machine. The employee attempted to reposition the bar when it started spinning and caught his left glove. The employee's thumb was pulled into the feed table roller, resulting in fractures to the left thumb, wrist, and forearm.",0
"On June 8, 2023, an employee was working on a skid steer when they suffered a crush injury to their leg that required hospitalization and surgery.",1
"An employee was airing an unmounted tire when the tire popped, striking employee's left and right hands with the wheel of the tire. The employee sustained a right-hand knuckle jam as well as a laceration and fracture between the first and second digits of the left hand that required surgery.",1
An employee was completing a roll converting operation on a machine when their hand/arm became caught in the rollers. Both bones in their forearm were broken.,1
"An employee was utilizing a truck mounted crane to remove a trailer hitch pin. As the employee was assisting with loading the haul trailer, the tongue of the trailer fell on the employee's foot. The employee's right foot was crushed.",1
"An employee was manually rotating a 3 3/4-inch hand wheel on a new slat conveyor as part of an adjustment process. There was a gap at the bottom of the wheel and the wheel-holding bracket. While rotating the wheel, the stem dislodged from the holding bracket and the wheel shifted downward, causing the gap to close and pinch the tip of the employee's right little finger. The employee's fingertip was surgically reattached.",0
"An employee was replacing road reflectors on a tollway when they were struck by a vehicle, resulting in injuries to both legs and their right arm. A left finger was also amputated. The employee was hospitalized.",1
"An employee was moving product with a pallet jack when the load slipped off and caused the handle of the jack to rise. The handle impacted the employee's ribs, resulting in three left rib fractures.",1
"An employee was jumping on a trampoline when she hyper-extended her lower back, resulting in a strain/sprain injury that required hospitalization.",1
An employee was providing security services at a client location when a spare lithium-ion rechargeable flashlight battery exploded in his right pocket causing second-degree burns to his thigh.,1
"On June 8, 2023, at 11:33 p.m., an employee was operating a pallet wrapping machine when her finger contacted the chain and sprocket, resulting in a partial amputation.",1
"An employee was pumping lightweight gypsum flooring into a room on the second floor. The employee then went to help another individual who was trying to remove a sheet of drywall from the middle of a stack of 1/2 inch plywood that was leaning against a wall. As the other individual pulled out the sheet of drywall, approximately 14 sheets of plywood fell over onto the injured employee, resulting in a lateral tibial plateau fracture and lateral meniscus tear of the left knee.",1
"An employee was assembling the first track on a crawler crane and was using a crowbar (spreader bar) to adjust the shims. Something moved, causing the crowbar to strike and puncture the employee's chest. The employee required surgery.",1
"On June 8, 2023, an employee and a co-worker were walking toward each other from perpendicular directions when they collided and the injured employee fell, resulting in a broken hip that required hospitalization and surgery.",1
An employee was operating a tire machine and used the auto-up feature to raise the roller arm. The employee went to move the bead press tool that was interlocked with the bead mount tool when her hand was pinned between the two tools. The employee sustained a crush injury to the left ring and middle fingers.,1
"An employee was brazing when her foot got caught in a brazing line, resulting in her falling and hitting her left hip and knee. Approximately four hours later, she was at a different work station cleaning cooler doors. When she went to leave that area, she tripped over an airline and fell onto her left hip, knee, and elbow. Both of these incidents resulted in her falling onto the concrete floor on her left side. Later, when returning from her lunch break, she fell in front of her vehicle and landed on her left side. The employee suffered a fractured left femur and hip, resulting in hospitalization.",1
"An employee was unjamming a baler when he fell 15 feet into the chute. The baler then compacted and trapped the employee, injuring both legs. One leg was broken and the other was amputated.",1
"On 6/09/2023, an employee was delivering mail when she noticed a chained dog. She moved to the sidewalk to skip the delivery, but the dog broke loose from the chain and attacked the employee. The employee was bitten above the left knee and sustained another bite on the inside of the left knee that removed skin and exposed muscle and bone.",1
An employee was removing an empty animal cage from near the top of a residential roof in order to repair roof damage. The cage caught their legs while walking and the employee fell 18 feet to the ground sustaining fractures to both ankles. The employee was not wearing fall protection at the time.,1
"On June 9, 2023, an employee opened the radiator cap on an off-road truck. Hot steam came out and burned the employee's neck, chest, and upper arms. He was hospitalized.",1
"An employee was finishing up his second-to-last delivery of the day. As he was bringing up the lift gate with his right hand, a finger on his left hand became caught between the lift gate and the truck resulting in an amputation.",1
"An employee was speaking with another employee near the admissions gate area when someone called the employee. She started to walk backward and tripped over a traffic cone and fell, sustaining a fractured left wrist.",1
"An employee was offloading cargo from the hatch of a motor vessel onto a dock when the cargo (bagged cement) struck the employee and caused them to contact a nearby hatch wall. The employee sustained injuries to their neck, right lower back and right leg.",1
"An employee's right index finger was pinched between the pressure die and pipe of a hydraulic pipe bender, resulting in a fingertip amputation.",0
An employee was clearing a jam in a colloid mill machine when their left index finger was amputated at the distal joint.,0
An employee was staying in a dorm room for a six-month training session. The employee was bitten by an insect and hospitalized with left and right arm paralysis.,1
"An employee was walking food over to a patient when she slipped on the floor and fell, resulting in a broken knee.",1
Employees were using a lift to place a harvester head onto jack stands. The lift hydraulics activated and pushed the harvester head off the jack stands and onto two employees. Employee 1 was hospitalized with fractures to the pelvis and femur and a dislocated hip. Employee 2 was struck in the head and sustained a concussion but was not hospitalized.,1
An employee was working underneath a vehicle that was on a lift. He was knocking a bolt off with an impact wrench when a piece of metal from the bolt entered his left eye. The employee was hospitalized with an eye injury.,1
An employee was retrieving latex balloons to fill on order when they had an allergic reaction to the latex. The employe was hospitalized.,1
An employee was climbing a portable ladder to retrieve an item from the second level when she hit her head against a ceiling reinforcement. The employee sustained a concussion and lacerations.,1
"An employee was standing in a landing  area that was being painted waiting to get to the third floor. The employee stepped back to let someone pass, fell 20 feet to the cement floor, and suffered a head injury.",1
An employee was replacing a thermostat for a two-door commercial refrigerator when the refrigerator fell over onto him and fractured his left femur.,1
An employee was cleaning concrete off the rollers of a truck-mounted concrete conveyor belt when one of their fingers was caught and amputated by the conveyor.,1
"An employee was cleaning out a mobile tank unit with a pressure washer. The washer's hose failed, causing air and water at high pressure to puncture the employee's hand. The employee was hospitalized.",1
A temporary employee was using a router when the router fell. The employee went to grab the falling router and the blade caused an amputation to the distal portion of their right thumb.,0
A temporary employee was manually loading a hopper with plastic material when he became ill. The employee was hospitalized for possible heat exhaustion.,1
An employee developed a hernia while lifting objects and pushing and pulling flat gaylords on a pallet jack. He was hospitalized and required surgery.,1
"Employees were using a machine to connect two pipes at the joint. One pipe was in the joint while the other pipe was held level by a crane with a synthetic sling. The injured employee's right ring finger was caught between the sling and a pipe component, resulting in amputation.",0
"An employee was carrying two trash bags to a bin in the kitchen area when they tripped and fell to the floor, resulting in a fractured left knee and hip.",1
An employee was removing a section of a conveyor that weighed 40-50 lbs. when it slipped and caused a laceration to their little toe that resulted in amputation.,0
"On June 10, 2023, an employee was at a shipping yard, installing load straps onto a tractor-trailer. The wind knocked down a stack of roof trusses that were standing up and the employee was struck by the trusses and fell to the asphalt. He was hospitalized with fractures to the femur, wrists, and the skull in two places.",1
An employee suffered amputations to the right index and middle fingertips while using a slicing machine.,1
An employee was filling out paperwork near the ramp and was struck by a tug. The employee sustained a fractured right leg.,1
"An employee was disconnecting an empty railcar when chlorine got into their lungs, resulting in upper respiratory irritation.",1
"An employee was moving an 1,100-pound fluid end backing plate using a fork truck. The plate had shifted out of place. When the employee went to reposition the plate on the forks, the plate slipped and caught their left middle finger against the forks, resulting in partial amputation.",0
"A temporary employee was on top of a conveyor servicing a robot contained within a safety cage. A sensor at the end of the conveyor was engaged, which initiated an auto cycle. The robot contacted the employee, causing him to go in the air and strike the safety cage. The employee suffered a skull fracture. The robots were guarded but not locked out/ tagged out at the time of the incident.",1
An employee was trying to lower a vehicle that was on a lift in an automotive shop when her hand became caught in the lock on the lift. At least one fingertip was amputated; the left middle fingertip.,0
"While standing on the bumper of a pickup truck, an employee was grabbing a hand tool from a toolbox in the back of the truck. The employee slipped, causing his right thumb to be pinched between the tool and the bumper of the truck. A portion of the thumb was medically amputated.",0
An employee was carrying roofing materials across a scaffold to the dumpster when he collided with another employee and fell to the ground below. The employee sustained a back injury.,1
An employee suffered a muscle pull in the chest while lifting a 50- to 60-pound trash drum. The employee was hospitalized.,1
"An employee was exiting the cab of a truck. The employee slipped and fell to the ground, suffering a broken left hip. The employee was hospitalized.",1
An employee was moving a load of sheetrock when the sheetrock dolly struck her leg. The employee was hospitalized with a fracture to her lower right leg.,1
"A doctor was working with a patient. When the patient was told that they would need continued treatment, the patient assaulted the doctor. The doctor fell to the floor and sustained a back injury.",1
"A temporary employee was washing lettuces when he began to experience body cramps. He was hospitalized, suffering from heat exhaustion and dehydration.",1
"An employee was working at her desk in the computer lab. When she stood up, her legs buckled, causing her to fall to the ground. The employee sustained a broken hip that required hospitalization.",1
"An employee was driving forward in a container top handler vehicle with a container raised. When the employee applied the brakes, they were ejected from the cab, going through the glass. The employee sustained a punctured left lung, lacerated liver, crush injury to a kidney, seven broken ribs on the left side, and scalp lacerations. The employee was hospitalized and required surgery.",1
An employee was walking backward as he moved a trailer in a yard. He tripped over a block and suffered a broken ankle.,1
"A switchboard operator leaned back in her chair and the chair tipped over. She fell backward and struck her head on the floor, sustaining a subarachnoid bleed.",1
An employee was checking the spare bin level when they fell through a false ceiling approximately 15 feet to the ground. The employee landed on his feet and sustained a fractured left elbow and sprained right ankle.,1
An employee was handling wheel acid when it spilled onto her right leg and soaked through her clothing. The employee was hospitalized due to chemical burns to her leg.,1
An employee in the tire shop was using a wrench. The wrench slipped and the employee's left index finger was amputated on a tire rim.,0
An employee was holding onto a load when their fingers were pinched and fractured by the rigging device.,1
"An employee reached to remove a bottle that was stuck in the cooling bed table across from her. The employee's right arm got caught between the equipment frame and a flight bar, resulting in a fracture to the radius and ulna of the right arm.",1
An employee was picking orders in a freezer warehouse. He developed frostbite in both middle fingers; the right middle finger was partially medically amputated. The incident occurred during a training activity.,1
"On June 12, 2023, an employee was releasing the clamps on a rail that was being loaded onto the rail car when his foot slipped and was dragged underneath the rack that the rail sits on resulting in the amputation of four toes on his right foot.",1
"An employee was shooting studs with a 30-pound deck gun. As he twisted to reach an area of decking, he suffered a back injury. Later in the afternoon, he was hospitalized.",1
"An employee was pushing a linen cart down a ramp. He lost his footing, took a step backward and fell to the bottom of the loading dock, suffering a broken left hip.",1
"On June 12, around 9:43 AM, an employee was working as a flagger at the front of a job site. They were struck by a vehicle while standing off the road at an intersection. The employee sustained broken ribs, ligament sprains to their cervical, thoracic, and lumbar spine, and a laceration to the right elbow.",1
"A maintenance employee's left hand was caught by the rotary valve on the carbon silo/hopper, resulting in amputation of the distal tip of the fourth finger.",1
"An employee was walking through the parking lot, returning from their break, when a motor vehicle struck them. The employee sustained a concussion, facial fracture, and contusions.",1
"On June 12, 2023, an employee was in a classroom tying up the lights in a ceiling grid in preparation to remove the ceiling tiles. He was working from a 10-foot A-frame ladder. As he was descending the ladder, he missed a rung and fell about 7 feet to the floor, sustaining a laceration to his left eyebrow and a fracture to his left elbow.",1
"An employee was standing on top of a stack of pallets approximately 3 feet, 9 inches tall to adjust a conveyor near a palletizer. The employee lost his balance when coming down from the pallets and fell to the concrete floor below, resulting in a compound fracture to his left wrist.",1
An employee was performing maintenance on a cold header machine in the MVH. He was lining up a pin hole to put a one-inch round pin between the arm of the cold header machine and a piece of metal. The arm slipped out of his hand and dropped causing a partial amputation to the employee's left index finger.,0
"On June 12, 2023, at approximately 12:00 PM, a mail carrier was bitten by a dog on her left calf while delivering mail. The employee was hospitalized and required surgery.",1
"An employee was preparing to pump chemicals from a tote on a truck bed into a continuous injection tank. While walking on the tote and transitioning to another container, the employee slipped/tripped and fell to the ground sustaining fractures to vertebrae and the left wrist and a head laceration.",1
An employee was installing a solar panel when they lost balance and fell from a second story roof to the ground below. The employee sustained fractures and bruising to their spine.,1
"An employee was aligning the guide on the in-puller machine when his left arm was caught in the in-puller. The employee sustained damage to an artery in their left shoulder/back, an avulsion to the left elbow, and cuts on their left arm.",1
"An employee was performing a pressure check and leak test on a unit when nitrogen gas was released from a valve core removal tool. The nitrogen gas was injected into the employee's right hand, resulting in a burn to the skin, swelling, and pain.",1
A beach attendant lost consciousness due to heat-related dehydration.,1
An employee was walking back to his forklift after stopping to remove paper from its forks. Another forklift struck him as it backed out of a semi-truck trailer. He was pinched between the side of his own forklift and the counterweights on the forklift that was backing up; he suffered a contusion from the top of his left thigh to his ankle.,1
"An employee was delivering boxes of books using a pallet jack. While the employee was maneuvering the freight and exiting the trailer using the liftgate, they fell from the liftgate. The employee sustained fractured ribs, a collapsed lung, a scapula fracture, and contusions on their right hip and back.",1
An employee was connecting a sling hook on a ladle to an overhead crane when their finger was crushed as the crane was lifted. Their index finger was amputated.,0
"An employee was stepping off a walkway that was about 3 feet above the ground. He slipped, landed on the metal handrails of the stairs below, and suffered broken bones on the left side of his ribcage.",1
"On June 13, 2023, an employee was assisting with placing equipment onto a flatbed truck. The employee was on the bed of the truck directing the movements of a skid steer that was loading a 5-inch collar weighing approximately 500 pounds. The employee stepped forward to assist with moving the collar off the forks when the collar rolled on top of the employee's foot, causing compartmentalized swelling that required hospitalization and incisions to relieve the pressure.",1
An employee was feeding metal into a brake press. The press closed on his hands and crushed his fingers. He was hospitalized and required surgery.,1
"On June 13, 2023, an employee was performing castor duties when a bag of molten steel dripped down their right leg and boot, resulting in burns to their right foot and their right index fingertip.",1
"While servicing a container in an alley, an employee was rolling the container when it encountered an indentation in the alley and stopped abruptly. The employee reached out to grab the container and felt a burning sensation in his abdomen. The employee was hospitalized with a hernia and required surgery.",1
"An employee had worked all day as a rear-load garbage truck driver, loader, and off loader. After returning home, he began experiencing cramps and was hospitalized, suffering from heat-related muscle injury.",1
"An employee was using a 60-foot ladder to access the fourth floor of a building in order to paint the balcony. The employee was holding onto the handrail while painting it when the handrail brackets broke, causing him to fall approximately 30 feet to the ground and land on top of air conditioning units. The employee suffered severe lacerations on the face and fractures to the cheekbones and eye bones. The employee was hospitalized.",1
A service technician mis-stepped while climbing a fixed ladder and fell approximately 5 to 6 feet. He sustained fractures to the back and ribs and was hospitalized.,1
An employee was troubleshooting a chlorine tablet press. The employee was cleaning some excess granular material off the press when the punch and die amputated his right middle fingertip above the cuticle.,0
"While changing the couplings on a pump, an employee was sprayed in the back of the head with a chemical. The employee suffered hypertension caused by the chemical and was hospitalized.",1
A commercial truck driver was standing near a truck that a forklift was loading. An aluminum rail fell on the employee's left foot and fractured it. The employee was transported to the hospital for surgery. Two toes were later amputated.,1
"An employee was in a hole using tongs to torque an electrical connection when his left little finger got caught between the latch and the head of the tong, resulting in a partial finger amputation.",0
An employee had been installing shields. He fell less than 6 feet from a portable step ladder to the concrete floor and sustained a contusion and laceration to the head. The employee was hospitalized.,1
"On June 13, 2013, an employee was working on a slitter that was down for repairs. The machine's cutter rotated and amputated the employee's left hand.",1
"An employee was waiting for a patient at the front door when a dog jumped on her, causing her to fall down the stairs and sustain a fractured left little finger and thumb.",1
"While driving a scissor lift through a door, an employee's right little finger was pinched between the scissor lift and the metal door jamb. The employee's finger was broken and required surgery.",1
"An employee tripped and fell on a paved roadway, suffering a broken leg.",1
An employee was preparing to connect storm pipe to a structure. The employee went to connect the choker cable to the excavator bucket and the pipe slipped and struck them. The employee sustained a crush injury to the left foot that involved multiple fractures.,1
"An employee was unloading a vessel and ascending a ramp with a two-wheeled dolly. The employee slipped, and the dolly and vessel fell on top of and crushed his left hand. The employee's left ring finger was amputated above the first knuckle; his left middle finger was also damaged.",1
An employee was standing near his tractor trailer while a forklift was moving a load of boards and mixed materials varying in size. A wooden board (2x12x20ft) fell from the top of the load and struck the employee in the head.,1
"An employee was cutting a board on the table saw. The board kicked back and struck him in the stomach area, resulting in a perforation of the small intestine.",1
"An employee was removing a piece of cardboard off a steel coil strip when the strip bounced up and pulled his right hand into a set of pinch rolls. The edge of the steel strip contacted his right forearm, resulting in a laceration.",1
"An employee was pushing trash over the side of a second-story stairway landing into a receptacle below. He fell off the landing and suffered injuries to his head, hip, and leg, including a broken femur.",1
An employee was working on the trim of the roof of a portable building. The employee was walking on a set of 5-foot-tall scaffolds with his tools when he fell off the open end of the scaffold. The employee sustained shoulder pain and internal bleeding in his brain.,1
"On June 13, 2023, an employee was helping an equipment operator use a pounding machine to drive steel guardrail posts into the ground. The employee was stuffing a post into a hole and lining up the pounder head and the top of the post. A block that absorbed the impact of the pounder head fell off the post, causing the cable guiding system to tighten suddenly. The cable caught the employee's fingers. The employee's left middle and ring fingers were amputated to the first knuckle.",0
"An employee was connecting a replacement lighting fixture. An arc flash tripped a circuit breaker, and the employee lost his balance and fell off the third or forth rung of a 6-foot step ladder. He struck his head on the wall or floor and fractured his skull. He was hospitalized.",1
An employee was hitching a towable trailer to a pickup truck. The top part of his right index finger was amputated in the hitch point as he tried to check the trailer connection to the ball mount.,1
The injured employee was preparing a container for shipment. When prepping the truck for loading the dock plate came down on his left index finger and amputated it.,1
"An employee was changing a die on a press machine. When he pulled the die back toward him across static caster rollers, his left middle finger became caught in a caster roller, resulting in a fingertip amputation.",0
"Two employees were driving a UTV to the office trailer when the UTV struck a loading dock guardrail. The injured employee was caught between the UTV and the guard rail, resulting in a right hip fracture.",1
"An employee was flipping rods in a boring machine when a button was pushed, causing the grips to clamp down on the employee's finger. His left middle finger was partially amputated.",1
"As employee was walking when her supervisor called her name from behind her. The employee turned around and fell, resulting in a fracture of the femoral neck on the left hip.",1
An employee was cutting a piece of wood with a table saw when her right thumb tip was amputated.,0
An employee was loading a drill string on the tail string of an existing drill rod during horizontal drilling activities for trenchless utility installations. A 4-foot pipe wrench caused a compound fracture in the employee's left arm.,1
"Employees were setting up steel cables to be tested. As they were walking across the facility adjacent to a steel cable that was being tested, the cable snapped. The injured employee began running, then tripped and struck his head on a steel bar. The employee was rendered unconscious and sustained an ear bone fracture.",1
"A temporary employee was moving a steel coil using a forklift when the coil slipped off the forks, causing the vehicle to rock. The employee fell out of the vehicle to the floor and a fork from the vehicle came off and struck their right leg. They were hospitalized for a right leg fracture.",1
An employee was on an extension ladder replacing a cable drop when the utility pole that the ladder was leaning on snapped. The employee fell to the ground and sustained a right elbow injury.,1
An employee was troubleshooting a fan on a CT imaging device when their right middle fingertip was amputated by the fan.,1
An employee was grading lumber at the planer lug loader infeed when a broken piece of dimensional lumber was ejected from the planer trimmer and struck the employee. The employee sustained a concussion and intracranial bleeding.,1
"An employee was cranking a landing gear on a semi-trailer. As he was pulling toward his body, his right hand slipped from the handle and the metal handle struck his mouth and right jaw area. The employee sustained a right mandible fracture.",1
An employee was on a residential roof installing solar panels when he began to feel dehydrated and light-headed. The employee suffered acute kidney failure and heat exhaustion.,1
An employee was monitoring the air-lock device that is used to move flour product to a different area of the facility. The air-lock machine became choked with product. The employee unscrewed a section of the housing and proceeded to unclog the machine. The machine activated while his right hand was in the point of operation resulting in amputation of the index finger to the first knuckle and lacerations to the middle and ring fingers.,0
An employee was moving a pallet of product in the shop when their electric pallet jack struck a stationary forklift. The employee's ankle was caught between the vehicles and fractured.,1
"An employee was grinding an I-beam when the conveyor turned on and pinned the employee between the I-beam and the conveyor. He sustained contusions and abrasions to the abdomen, pelvic area, back, and legs, requiring hospitalization. The machine was not guarded at the time.",1
An employee was operating a machine when their left ring finger became pinched between the piston and the face of the machine. Their fingertip was amputated. The machine was not guarded at the time.,0
"An employee was using a forklift to offload a channel from a truck while another employee was standing near the vehicle observing. The channel on the forklift became unsteady and the load began to fall, striking the employee that was observing. He was hospitalized for a leg fracture and injuries to his left elbow and side that required surgery.",1
"An employee was spraying chemicals onto a propped up metal sheet on a wall when it fell over onto the employee's left foot, puncturing the toe guard and amputating his left little toe.",1
An employee was working with a brake press when their hand became caught in the press. The employee's thumb was fractured and required surgery.,1
"An employee was preparing to transfer a transporter. The transfer car was moving from the east side of a basin to the west when the employee noticed the towing boom was going under the carriage of the first cart. The employee reached out to grab the boom when his right middle finger got caught between the boom and the cart, resulting in an amputation of the distal phalanx.",1
An employee was in a trailer at a loading dock unloading goods when he fell to the floor. The employee sustained a sprained left knee.,1
"An employee was walking as a nearby forklift was driving into the building. The forklift was backing up to go into another bay when it ran over the employee's right foot, resulting in a crush injury.",1
An employee was standing outside of the vehicle when the door closed on his right ring finger resulting in amputation of the finger.,0
A pneumatic gate valve on a ribbon blender closed on an employee's left hand. His left index finger was lacerated and amputated at the knuckle. His left middle finger was fractured and lacerated.,0
An employee was holding an upset child and attempted to bring the child to the ground when they rolled their ankle and sustained a fracture in two places. The employee was hospitalized and had surgery.,1
"An employee was moving an incline conveyor in the sausage department when one of the wheels potentially hit a dip in the floor near a drain. The conveyor tipped over and landed on his left leg, fracturing the employee's femur.",1
"An employee was returning to their workstation in the warehouse after dropping paperwork off at the office when a door shut on their left little finger, resulting in a fingertip amputation.",0
An employee was spraying down equipment using a water hose when they tripped over the hose and fell to the ground. They sustained a right hip fracture.,1
An employee was securing wood pieces around vehicle wheels inside of a trailer when the pneumatic nail gun shot a nail into their right foot. The employee was hospitalized.,1
An employee was picking up a highway concrete barrier wall. Their left ring finger was crushed between the bolt and loop resulting in amputation of the fingertip.,0
"An employee was changing out the tooling on the vertical machining center (VMC) when the table he was positioned on moved and crushed his pelvis between the platen table and the frame of the machine, resulting in a pelvic fracture. The machine was not guarded at the time.",1
"An employee was hanging clothes on a Z-rack in the processing area. As the employee went to move the rack, she tripped over the rack and fell, fracturing her hip.",1
An employee was unloading his work truck and raising the lift gate when his finger was crushed between the frame and the gate. The employee's left middle fingertip was amputated.,1
An employee had been unloading product onto the loading dock. The employee was working to get the docking plates in place and trying to keep a leveler from folding too early. The employee pulled the chain for the docking plate while holding the leveler. The plate pinched the employee's finger and amputated it to the first knuckle.,0
An employee was working on a communications tower when they began to suffer heat exhaustion.,1
"An employee was using a planer machine when a wood board became stuck. As the employee went to free the piece of wood, two of their right-hand fingers were crushed between the belt and the guard.",1
"An employee was building a drawer for a kitchen cabinet. He was using an electric saw table to cut wood, when a piece of wood flew into the air. It hit his face and went into his right eye resulting in loss of the eye.",0
An employee was making deliveries on his route and became lightheaded and ill. He was hospitalized for dehydration.,1
"An employee was walking through the sales floor when he tripped and fell, sustaining a left knee fracture and a left eye laceration. The employee was hospitalized.",1
An employee was on a roof when they fell through the roof to the ground. The employee sustained a wrist fracture and damaged vertebrae that required hospitalization.,1
"An employee was cutting frozen meat with a band saw when his right index finger contacted the blade, resulting in amputation.",0
An employee was conducting concrete work while standing outside on a concrete platform. A form constructed of aluminum and wood fell and fractured the employee's right leg.,1
"An employee was feeding copper tubing into a bender for the HVAC manufacturing process. The bender pulled the tube in and pinched the employee’s hand in the clamp that grabs the tube, resulting in a left middle fingertip amputation.",0
"An employee was checking the taped hole he created on a shaft and was pulling the tail stock back on the lathe. The employee leaned over the machine and the lead screw caught his shirt, pulling him into the machine. As it pulled tighter, he was forced toward the machine, impacting his right shoulder. The employee suffered multiple fractures and torn tendons to right shoulder.",1
"Two employees were loading a large box into a van from a loading dock. The van was repositioned further from the dock and as the employees were pushing the box in, the injured employee fell approximately 4 feet from the loading dock into the truck well. The employee sustained fractures to the hip/pelvis as well as an ankle and shoulder injury.",1
"An employee was entering his workplace building. While walking up the steps, he tripped on the stairs and fell onto his side on the landing. The employee was hospitalized with a leg fracture.",1
"An employee was on a 20-inch wall pulling weed cloth when they fell backward onto the concrete sidewalk, sustaining a head injury as well as a wrist and arm fracture.",1
An employee was nailing together the floor of a shed when the nail gun shot a nail into the side of his right knee. The employee required surgery.,1
"An employee was realigning the drive arm of molding machine. As he lifted the arm, it began to move, crushing the employee's left arm between the machine and a beam. The employee required surgery.",1
An employee was getting out of a yard truck to go into a warehouse to get paperwork when his left calf was caught on the hook attached to the truck's battery box. The employee sustained a laceration.,1
An employee was cleaning a material granulator machine. The machine activated while the employee's right hand was near its blade; the employee suffered amputations to the middle and ring fingertips.,0
"On June 15, 2023, at 11:30 AM, an employee was moving a belt on a pumping unit when he slipped, causing his right hand to get caught between the belt and sheave.  His right wrist was dislocated and required surgery and his left ring finger was amputated at the last joint. The employee was hospitalized.",1
"An employee was forming parts on a punch press. As he was removing parts from the tooling, he tripped, catching his left hand in the tooling. Two of the employee's fingers were partially amputated.",1
"An employee was working to bring a fan inside during tornado search and rescue. The employee climbed over a locked door and fell 15 feet to the ground, fracturing both heels.",1
"An employee was loading a machine onto a trailer deck in the parking lot of the facility. The tilting deck returned to its horizontal position, causing the employee step backward and catch his right foot in the channel beam on the front of the trailer bed. The employee sustained injuries to his right foot, ankle, and right forearm.",1
"On June 15, 2023, an employee was on a 6-foot A-frame ladder, installing a receptacle for a flat-screen television in an office. As he descended the ladder to retrieve a tool, he fell to the floor and sustained fractures to the right forearm/wrist.",1
"Two Rycon employees were installing glass marker boards in a nearly completed space. Each employee had a suction cup on the face of the board and a hand on the bottom of the board. Upon hanging the third board in sequence on a hang strip mounted to the wall, the board needed to be moved about half an inch to butt tightly to the adjacent one. When the employees moved the marker board, it shattered causing half of the board to fall and cause a severe laceration to an employee's left wrist.",1
An employee was abrasive blasting in the fan room on a ship. He backed into a 12-inch dust collector chute. The suction pulled the employee's left shoulder into the chute and the employee lost control of the blasting hose. Blast media caused an avulsion to the employee's upper right bicep.,1
"On June 16, 2023, an employee was checking the I-beams on a bridge. He unhooked his harness to move across the section of the second beam. While hooking his harness on the third beam, his foot hit the cable that was connected to the beam and fell approximately 25 to 30 feet to the muddy clay floor below. The employee sustained a left hip and femur fracture.",1
"An employee was troubleshooting and programming the computer radio surveillance equipment. As they were descending a fixed metal stairwell, they slipped and fell, sustaining a left ankle fracture.",1
"An employee and a co-worker were moving a metal pipe. When the employee set the pipe down, his right hand was crushed between that pipe and another pipe, resulting in a partial amputation of the right ring fingertip.",1
"An employee brought two scissor lifts to a new construction warehouse, and was documenting the completion of delivery by taking pictures. The employee walked backward to get a wider angle and stepped off the loading dock, falling about 46 inches to the concrete ground outside the loading dock. The employee's right elbow was fractured.",1
An employee was cleaning a mixer when their right leg got caught between the rubber paddle and mixer wall. The employee was found unconscious and sustained a crushed artery in the right leg.,1
An employee was hospitalized for heat illness.,1
An employee was refueling a pump when a flash fire occurred and burned the employee's left arm. The employee was hospitalized.,1
An employee was operating a stand-up forklift in the warehouse when the forklift spun and the employee was caught between the forklift and metal shelving. The employee sustained multiple broken ribs.,1
"On June 16, 2023, at 7:45 AM, an employee was operating a plate forming press and went to remove a piece of tape from inside the machine. The machine cycled and amputated their left ring fingertip.",0
"An employee was assisting three other employees to load a reel of paper into the saddles of an unwind stand when the springs compressed, and the gap closed on the injured employee’s finger. They sustained an avulsion to the left ring fingertip that was surgically amputated.",0
An employee was working on a company truck. He went to get a tool off a workbench and tripped over a radiator causing him to fall and sustain a fractured right hip.,1
"On June 16, 2023, an employee was elevated in a scissor lift and was removing a pipe from a structure when they began experiencing back pain. The employee sustained a ruptured abdominal aneurysm from lifting/carrying/pulling pipe.",1
An employee was cleaning inside a box at the top of a conveyor belt when the machine was started. The employee sustained fractures to their foot and back requiring hospitalization and surgery.,1
"An employee was setting up a machine when it closed on their fingers, resulting in an amputation.",1
"An employee was cutting boards with a sawmill edger when the board kicked back and struck the employee in the neck. The employee sustained a neck laceration, cervical fracture, brain hemorrhage, and traumatic brain injury.",1
"An employee was working on a plastics handling machine trying to clear a clog on the nitrogen line. The grinding gears of the machine caught the employee's hand, causing an amputation of his left index finger at the first knuckle.",0
An employee was participating in demolition work when a non-structural wall collapsed on him. The employee was hospitalized with a fractured shoulder.,1
An employee was in the fields picking squash when they were stung by a bee resulting in an allergic reaction that required hospitalization.,1
An employee was pushing a material handling cart with a carton of toys to the salesfloor to stock when his right foot was caught underneath the cart. The employee fell to the floor and sustained a right hip fracture.,1
"An employee was walking to the main hospital when she tripped and fell on the floor, hitting her head and right elbow. The employee was hospitalized with a fractured right elbow.",1
"An employee was knocked off a scaffold while demolishing a ceiling. The employee fell to the floor, suffering a head injury and broken ribs.",1
"An employee was working on a ceiling fan when they fell 12-13 feet to the floor, resulting in a fractured skull, concussion, and a punctured arm. The employee was hospitalized.",1
"On June 16, 2023, an employee had been working on an electrical pole. After work, the employee was hospitalized for heat exhaustion.",1
An employee was on a stock cart reaching for product when they fell and sustained fractures to the pelvis and spine.,1
A maintenance technician was called to troubleshoot a proximity switch on top of a cheese table. The switch triggers a metal detector for an agitator to stir the cheese curds on the table and the agitator stopped working. The technician was inside the casing for the agitator chain when his boot got caught in the chain. He was hospitalized with a fractured leg that required surgery.,1
An employee parked his work vehicle in a customer's parking lot when a robber approached the employee with a gun and asked for his money and wallet. The robber started shooting; the employee sustained gunshot wounds to the neck and hand.,1
"On June 17, 2023, an employee was moving steel plates from a forklift fork when the magnet malfunctioned. The steel plate fell on his  right index finger and crushed it.",1
An employee was making precast concrete forms when they began to feel ill. The employee was hospitalized for heat exhaustion.,1
"An employee was loading sand onto a moving locomotive when they jumped off and fell, resulting in a broken ankle.",1
An employee was inside a work zone collecting samples for asphalt density and QA. The employee was struck by a vehicle and sustained a fractured pelvis and road rash.,1
"An employee was rebuilding a compressor engine on an offshore facility. As they were troubleshooting a connecting rod inside the compressor engine, the rod slipped down. The employee's finger was then caught between the crankshaft and connecting rod, resulting in a left middle fingertip amputation and fracture.",1
"An employee was standing on the bed of his truck using a strap with a built-in band cutter to band a pack of beams to the headboard of his truck. The employee lost balance and fell approximately 48 inches from the bed of the truck onto the blacktop surface below. The employee landed on his left hip area, resulting in a fracture.",1
"An employee was transferring conductors from a broken pole to a new pole. As they were tying a conductor with a preform tie, an electrical flash occurred, causing the employee to sustain second-degree burns to their left underarm, flank, and back areas.",1
"An employee was lighting a gas cook stove when excess gas from the burner ignited. The employee sustained first-and-second-degree burns on her hands, arms, and face.",1
An employee was walking through the kitchen performing job tasks when she became entangled in a cord that was attached to a table. The employee fell to the floor and sustained a hip fracture.,1
"On June 17, 2023, an employee was checking a tire for leak. As he released the air brake, the semi-truck fell from the jack onto the employee's right arm and rolled forward. The employee sustained an arm injury.",1
"An employee was waiting for the elevator to get to the floor that he worked on. The employee went to step through the elevator door, but the elevator lift was not there, causing him to fall 20 feet to the basement below. The employee sustained fractures in both legs, the right heel, and lower vertebrae. He was hospitalized.",1
"An employee was standing on a fork of a walk-behind stacker while holding a half pallet of mustard on the opposite fork. As the forks were raised, the pallet became unstable, causing the employee to lose his balance and fall approximately two feet to the floor. The employee sustained two rib fractures and a punctured lung.",1
"On June 17, 2023, around 10:00 AM, an employee was directing a customer who was reversing their pickup truck to get hay from a trailer. The customer's vehicle struck the employee's right leg, fracturing the femur.",1
"An employee was closing an aircraft door when their right hand slipped and was caught in the door, resulting in a little finger amputation.",0
"On June 17, 2023, an employee was operating an 18-wheeler with a feed trailer to deliver feed to a chicken house. As the boom raised, it contacted a power line and the employee was shocked. The employee also sustained a burn.",1
"An employee was working in the fulfillment area carrying large bags of dog food, cat litter, a cube organizer, and book cases. The employee began experiencing abdominal pain and sustained two hernias that resulted in hospitalization.",1
"An employee was operating a reach truck and was approaching the area where another pallet jack was parked. The reach truck struck the other vehicle and the employee's left foot was caught between both vehicles, resulting in a fracture that required hospitalization.",1
A letter carrier was delivering mail to a residence when they were attacked by multiple dogs and bitten on the face and arm.,1
"An employee was using a squeegee to drain water on the floor after mopping. The employee jumped and slipped as they landed, causing them to fall on the floor and sustain a hip fracture.",1
"An employee was carrying a bottle of door seal solution containing sodium silicate. The employee bumped their arm, causing them to ingest the solution. The employee suffered from  wheezing, nausea, and breathing difficulties.",1
An employee was walking to retrieve a forklift when they fell through a floor opening into a sump pit. The employee sustained chemical burns from their knees to their feet from the ammonium phosphate in the pit.,1
"An employee was operating a forklift with a set of floating forks that were attached to the mast. The employee had just delivered a pallet of pipes to the yard and was returning with the fork attachment. The employee lowered the forks to detach from the load bar when they came off incorrectly. He then exited the forklift to manually reset the forklift attachment. The fork set moved and then fell on his lower right leg, resulting in a fractured right tibia and fibula.",1
"Employees were transferring a finished sheet of plastic to a material table using a gantry crane with a vacuum lift attachment. Once it was on the table, the employees unhooked the vacuum lift attachment from the gantry crane hook and placed the attachment on the table. The employees then began to move the gantry crane hook when it caught the attachment and caused it to tip over. As the injured employee went to stop it from tipping, the equipment pushed the employee back, causing him to roll his ankle and sustain a leg fracture.",1
"An employee was operating a machine press when a part fell through the back of the machine. As the employee went to grab it, the ram came down and crushed their left hand and fingers. The employee was hospitalized and had surgery.",1
An employee was operating a stump grinder when their left shin/knee was fractured. The employee also sustained lacerations and tears. They were hospitalized.,1
An employee was working at the calcium flow board when the gasket from the outflowing hydrogen sulfide tank failed. The resultant pressure pushed the sodium hydroxide solution 15 feet to where the employee was working. The chemical caused burns to 12% of the backside of the employee's lower legs.,1
An employee was setting up a meal service for a new hire orientation. The employee was removing food items from a speed rack station and bending to retrieve bowls of food when she sustained a back strain.,1
"An employee was preparing a load on a semi-trailer for a delivery to a field location. After putting the straps over the totes, he descended the trailer. While descending, his pant leg was caught on the mud flap frame, which caused him to fall and strike his head on the ground. The employee lost consciousness and sustained a laceration and a fractured skull.",1
"An employee was working in the blow mold bumper area loading a bottle. A delivery tube jammed and as the employee went to remove it, their right index fingertip was amputated.",0
"On June 19, 2023, an employee was negotiating stairs on a theater set when they tripped on a set piece and fell to the floor sustaining a fractured left hip.",1
"An employee was removing a piece of asphalt debris from a conveyor when his glove was caught, pulling his hand and arm in. The employee sustained fractures to their left hand and forearm. The machine was not guarded at the time.",1
An employee was operating a golf cart when it struck a parked vehicle in the parking lot. The employee sustained a right tibia fracture.,1
"An employee was loading a chain on the back of a dump truck when the chain slipped, pinching and amputating their right middle finger.",0
"An employee was filling a false floor with wet concrete. The wet concrete entered his boots, resulting in burns to both feet.",1
"An employee was rotating a fan pulley/belt by hand when their glove was caught in the belt, pulling their left hand into the point of operation. The employee's left middle fingertip was partially amputated.",0
"An employee was walking near a forklift operator who was palletizing fruit pallets when the forklift drove into the employee, pinning them between a ladder and a crane. The employee suffered a broken leg.",1
"Two employees were troubleshooting a problem with an envelope folding machine. The injured employee stopped the machine and began inspecting the belt. As he manually gauged the tension, his finger was pinched between the belt and pulley, resulting in a de-gloving injury and fracture of the right index finger.",1
An employee was checking the pool area for glass containers and maintaining crowd controls when they began to experience heat exhaustion.,1
"Two employees were cleaning a glass vessel when it ruptured. Employee 1 was hospitalized for abrasions/lacerations to the face, neck, and eyes as well as exposure to sodium amide to their face and eyes. Employee 2 sustained abrasions and lacerations to the neck and was not hospitalized.",1
"A trailer truck driver was removing an empty metal pipe rack weighing approximately 50-60 pounds from his trailer. As he was pulling the rack with a trailer restraint lever, it slipped off the rack, causing the employee to fall to the ground from the same level. The employee landed on his left hip and sustained a fracture.",1
"An employee went to adjust a board in a machine after the E-stop was pressed. Freewheeling movement caused the employee's hand to be pulled into the saw blade, partially amputating his fifth, fourth, and third fingers on the right hand.",1
"An employee was sorting price tags at a register when they tripped and fell to the floor, resulting in a broken hip.",1
"An employee was utilizing a self-tipping forklift hopper that was secured on the forks of a skid steer. As the employee moved the lever to tip the hopper down, their left index finger was caught between the forks and the hopper, resulting in a partial amputation.",0
An employee was putting his boots on in the parking lot when he tripped and landed on his right  little finger. The employee sustained a fracture.,1
A temporary employee was performing a change-over on an extruder when his left hand adhered to the sticky tape on a roller. The employee was pulled onto the roller and wrapped in the plastic. The employee suffered multiple fractures and was hospitalized.,1
"On June 19, 2023, a temporary employee was trimming product to the correct length on the shredder machine in the production area. The employee's little finger contacted the machine blade and sustained a laceration that resulted in a partial amputation.",0
An employee was unloading a hot asphalt tanker and was sprayed with 350-degree hot asphalt oil. He suffered second-degree burns to the face and arms.,1
An employee was adjusting the position of a wood slab on a conveyor when their glove was caught between the slab and the frame of the entry chute. They sustained a laceration to the fourth finger and a partial amputation to the fifth finger on the right hand.,1
"An employee was loading containers onto a trailer when the trailer pulled off the dock with the employee still in the back. When the driver stopped, the employee fell to the ground and sustained a head injury.",1
"An employee was pushing a roll of wire mesh. He fell to the ground, suffering a torn rotator cuff and a broken right wrist. He was hospitalized.",1
An employee was operating a volumetric machine when his left middle fingertip was amputated. The employee also lost his fingernail.,1
An employee was completing various work tasks outside throughout their shift and experienced heat-related symptoms.,1
"An employee was raising a water valve using a T-arm tool when they lost their footing and fell onto hot asphalt, resulting in second-degree burns to their right forearm and upper left arm.",1
A temporary employee was loading and unloading materials from a truck when they fell from the loading dock to the ground. The employee sustained a spinal fracture and was hospitalized.,1
An employee was climbing a ladder to install aluminum products on a roof. The employee slipped and fell 6-8 feet to the ground sustaining rib injuries and a punctured lung.,1
"Two employees were working from an aerial lift, using spray painting equipment to paint a dust bin at a grain elevator. Employee 1 was repositioning the aerial lift so they could finish painting the bottom of the dust bin. With the boom elevated approximately 10 feet above the ground, he was driving the lift backward in the truck loading aisle. A vertical truck loading spout was behind him; he struck the spout, and his upper body was crushed between the spout and the lift's control panel.",1
An employee was using a manual pallet jack in the back of a truck when they fell approximately 4 feet to the ground. The employee sustained a lacerated liver and internal bleeding.,1
An employee was loading a masa cart into a masa lifter. He was adjusting the load when the tip of his right middle finger was amputated by the lifter.,0
"On June 20, 2023, an employee was working on a 1,150-pound part that was partially suspended by a crane. The tool was laid on its side so the employee could weld a part and adjust the wood dunnage underneath that was supporting it. The part was bumped, causing the lifting eye to shift and pinch the employee's finger between the dunnage and part. The employee's left index finger was amputated at the first knuckle.",0
"An employee was using a wand to clean the inside of a pallet lift machine when her arm got caught between the hydraulic lift and the machine's frame, crushing her forearm.",1
An employee was engaged in industrial vacuuming work within a confined space. They experienced heat related symptoms such as cramps and were hospitalized.,1
"An employee was operating a forklift in the warehouse. As they were dismounting, the employee felt pain in their leg from stepping down and sustained a left leg fracture.",1
"An employee was performing service and maintenance on a chiller machine. While placing the screen back onto the chiller, the machine started up, causing the employee's left leg to become caught by the paddle. They sustained a left tibia fracture.",1
"On June 20, 2023, an employee was replacing a residential air conditioner. The employee picked up a concrete slab to throw it when they twisted their back, resulting in a back injury.",1
"An employee fell approximately 15 feet through an HVAC opening on a roof, landing on a concrete surface of the 27th floor below. He suffered blunt force trauma to the head and body.",1
"An employee was deterring an attempted theft and was attacked by three men. The employee sustained a fractured skull, broken orbital bones on both sides of his head, and intracranial pressure.",1
An employee was delivering mail outside when they began exhibiting signs of heat exhaustion. The employee was hospitalized.,1
"As part of training, an employee was parking a pallet jack in the battery room when his left foot was caught between the pallet jack platform and a battery changing machine. The employee sustained fractures.",1
"On 6/20/2023, an employee was opening a water faucet valve at a facility when they were stung by a wasp and experienced a severe allergic reaction. The employee was hospitalized.",1
"An employee was replacing a strap on a flatbed trailer. As the employee tugged on the new strap to remove slack from the binder, the strap slid out of the binder. They fell backward, striking the back of their head against a stationary forklift. The employee sustained a skull fracture.",1
"Nurses were repositioning a patient in an operating room bed. As the injured employee lifted the patient's lower legs, she felt pain in her lower back from a muscle strain.",1
"On June 20, 2023, an employee was loading packages onto a package car. As she moved a 36-pound package from the truck's floor and set it on the shelf, in a twisting motion, she felt discomfort in her lower back. The employee was hospitalized for sciatica.",1
"An employee had been servicing cars in the back room when he began to cramp up, experienced trouble breathing, and had chest pain. The employee was hospitalized due to dehydration.",1
An employee fell off a ladder and was hospitalized with a brain bleed.,1
"An employee was removing an extension ladder from the rack on their pickup truck while standing on the rear bumper. The employee lost their footing and fell, grabbing onto the tailgate to catch themself. The tailgate then gave way and opened causing the employee to fall to the asphalt pavement and sustain a hip fracture.",1
"An employee was moving conveyors in a warehouse to another location using rolling casters. The legs became detached from the bottom of the conveyor, and the employee's right index finger was caught in the conveyor pinch point, resulting in a fingertip amputation.",0
"An employee was leaving to take a break when she tripped over a pallet and fell, sustaining a left fibula fracture.",1
Two employees were involved in an altercation. One employee sustained a gunshot wound and was hospitalized.,1
An employee was in their car waiting to take a client to do laundry. The employee was attacked by carjackers and sustained two gunshot wounds to the left side of his face and neck.,1
"An employee was using a rag to wipe down a roll coater machine when the rag got caught in the machine. The employee's right hand was pulled into two rotating rollers resulting in fractures to their index, middle, and ring fingers.",1
"An employee was setting up a die when the die started to fall. As the employee went to catch it, the die landed on and crushed the employee's right index finger between the die and the machine. Their right index finger was amputated slightly above the second knuckle.",1
"An employee got up from his chair and tripped on a cable. He fell on his left side, resulting in a femur fracture near the hip joint.",1
An employee was repairing a truck's liftgate when the liftgate slipped off the jack and fell onto the employee. The employee sustained a broken pelvis.,1
An employee was leaving a room when the door closed and their glove was caught in the door hinge. The employee's right little finger was partially amputated.,0
"An employee was using a roustabout. As he was lowering the hook for the cable and pulling the slack out of it, the lift began to tip over. The employee went to move out of the way but tripped and fell in the process. The lift then fell on the employee, lacerating his left leg and abdomen.",1
"Employees were installing wooden power line poles. Two wooden poles had been laid adjacent and parallel to each other on the ground, with one end of each pole placed on a 16-inch stand to allow for drilling. The injured employee was between the two poles performing drilling on one of the poles. The other pole then shifted and contacted the employee’s leg, resulting in a leg fracture that required hospitalization.",1
An employee was doing masonry work at a construction site when he collapsed from possible heat exhaustion or heat stroke. He was discovered unconscious and breathing heavily.,1
An employee was positioning a die plate using a wrench. The die plate moved and the employee's fingers were caught against the wrench. The employee sustained amputations to one or more fingers.,0
"On 6/20/2023, at approximately 12:20 PM, the injured employee was working on a decompletion at a well. A rig crew had set a blow out preventer (BOP) on the wellhead, and the injured employee was torquing the nuts when a spark came out from the side of the torque unit and ignited a flash fire. The employee was engulfed by the fire and sustained first degree burns to their face and second degree burns to both hands.",1
"An employee fell out of a chair, resulting in an injured ankle that required surgery to repair.",1
"An employee was grinding meat and when they attempted to remove excess meat from the chute of the meat grinder, the blade contacted the employee's right middle finger, resulting in a fingertip amputation.",0
"An employee and an operator were working on the hydraulic arm of a shaftless machine. The employee pulled the pin to release the hydraulic arm and restarted the machine after. The machine moved and pinched the employee's glove, pulling his left index finger into the machine. The employee suffered a laceration that resulted in an amputation/avulsion.",0
"An employee was stripping hallway floors using a heavy-duty stripper chemical. The floor stripper's buffer pad hit his right foot, causing a chemical burn.",1
An employee was helping to set a pole when they began feeling unwell and experiencing cramps due to heat stress.,1
An employee was moving paper stock within the sheeter machine when their hand contacted the blade. The employee's right little fingertip was amputated.,0
"An employee was descending on the inside of a turbine tower when he fell to the next lower level, resulting in a right hip fracture.",1
"An employee was descending a 24-foot ladder from a roof in windy conditions. He missed a step and struck his head on the concrete floor, resulting in bleeding from the ears.",1
"An employee was working on the floor when a co-worker in a nearby room began eating strawberries, causing the employee to suffer anaphylaxis.",1
"An employee fell off a catwalk to the ground 7 feet, 9 inches below, suffering a concussion and several broken ribs.",1
"An employee was fixing the automated 5-gallon bottling machine that had an empty bottle jam. When the jam was fixed, the machine activated and pinned the employee's legs between the robotic arm and the bottle racks. The employee sustained fractures to both tibias.",1
"An employee was walking through the saw department where equipment was producing engineered wood products. The employee was struck in the abdomen by a piece of wood measuring 20 feet long with a 20 inch diameter, resulting in internal bleeding and a ruptured small intestine.",1
"On June 21, 2023, an employee was working on an automated stacker machine when the stacker began to rise. The chain caught the employee's left hand, resulting in the amputation to the index, middle, and ring fingers.",1
"An employee noticed that a conveyor had stopped moving tires. As the employee was working to repair the conveyor, the sprocket advanced and amputated the employee's right middle fingertip.",0
An employee was in a bucket removing an old service line from a home when an arc flash occurred. The employee sustained burns to his left shoulder and arm.,1
An employee at a work site suffered heat exhaustion and was hospitalized.,1
"An employee was using a circular saw when his hand slipped and his glove became caught, pulling his finger toward the saw blade. The employee's right middle fingertip was amputated and a finger was fractured.",0
A driver was offloading a container from a truck when he lost his footing and fell approximately 5-to 5.5-feet from the deck to the ground and sustained a head injury.,1
An employee was pushing wood into the shaper machine when their hand slipped. They suffered a fingertip amputation.,0
An employee was lifting a concrete form box off the ground in preparation to pour concrete. A copperhead snake that was under the form bit the employee.,1
"An employee was positioning a fork on an extended boom forklift while standing on the ground. The fork assembly fell from the forklift, struck the ground, and then struck the employee's chest. The employee was hospitalized with hip pain and contusions to his abdomen.",1
An employee was retrieving materials from a wooden box attached to a forklift at the edge of the roof when he tripped and fell off the roof. The employee sustained a hip fracture. ,1
"An employee was using an overhead crane to transfer a flux hopper. While the hopper was being lifted, it swung toward the employee, crushing his left hand and lower arm against a wall. The employee was hospitalized with a wrist fracture.",1
An employee completed his delivery route when he began to feel weak and tired. He was hospitalized and treated for dehydration and a muscle injury.,1
"An employee was riding a bike off-site in preparation for an upcoming physical fitness test. The employee encountered a slick spot during the ride and fell off the bike, suffering fractures to the pelvis and right hip socket.",1
An employee was unloading a delivery truck. They were lowering a manual dock plate onto the rear of the truck when the plate fell and crushed their left hand. The employee's left index and middle fingers were partially amputated and reattached at the hospital.,0
An employee was guiding a forklift driver in a semi-trailer when a printer head on the forklift tipped over and struck them. They sustained fractures to the collarbone and three ribs.,1
An employee was climbing a ladder to enter a crane cab when he fell four feet and fractured his ankle.,1
"An employee was participating in a maritime training exercise, making entry onto a boat that was dry-docked. He had ascended a 10-to-12-foot ladder secured to the side of the boat. He was then descending onto the boat and fell approximately two feet from the ladder onto the deck of the boat. The employee was hospitalized with a fractured right wrist and ruptured right patella tendon.",1
An employee's fingertip was amputated while removing a piece of foam from an unguarded conveyor belt.,1
"Employees were moving equipment onto a truck. The truck was backing up when an employee was caught between the trailer and the load, resulting in injuries to the shoulder, ribs, and back.",1
An employee was walking to a staff meeting inside the building when she fell forward onto the linoleum floor. The employee's right shoulder was fractured and dislocated. She also sustained a nasal fracture and abrasion.,1
"An employee was touching materials with his hands and marking them off the shipment list. As the employee reached down to verify additional material, a rattlesnake came from behind a box and bit their right index finger.",1
"An employee was outside walking around a truck to perform final checks when he tripped over one of the outriggers. He then fell to the ground where his left elbow impacted his left abdomen, resulting in a kidney injury.",1
"Employees were loading pipes onto a flatbed truck when one of the pipes rolled off the truck and struck the injured employee, causing a fractured vertebra.",1
"An employee was sitting at a table when she heard a loud noise and got up from the table to check on the residents. The employee's foot got caught on the chair leg, causing her to trip and fall to the floor. The employee was hospitalized for a hip fracture.",1
"On June 21, 2023, a maintenance employee was descending a step ladder next to a press. They misstepped and fell approximately two feet to the floor fracturing their right femur.",1
An employee was using an angle grinder to clean a spool connection when the grinder kicked back. The right side of his face was lacerated by the grinder.,1
"On June 21, 2023, at approximately 11:45 a.m., an employee climbed a dock plate at a customer site to avoid heavy rain. While reaching with his left hand to support his footing, his gloved left hand contacted a powered conveyor chain that was next to the dock area. His left ring fingertip was medically amputated.",0
An employee was removing concrete from a hopper when the auger was activated and his leg became caught in the auger and amputated.,0
"An employee was sitting on a tall teller chair in a bank drive-through. She leaned forward in the chair when it rolled out from under her. As she fell, a metal footstool that was positioned under the teller station was knocked over. The employee fell on top of the footstool and suffered a puncture wound on the right side of her abdomen from one of the metal legs on the footstool.",1
"An employee was helping load a modular 10-by-10 trench box into a truck. As he tried to straighten the box so it could be loaded, the truck backed up. He suffered a partial fingertip amputation.",1
"An employee was unloading a customer's dump truck with grain in it when the pneumatic doors on the back of the truck opened, catching the employee's finger between the chain and the door. The distal portion of his left index fingertip was amputated.",0
"A steel plate was dropped, causing the employee's thumb to get pinched between the plate and a pallet/shim. The employee suffered an amputation to the distal half of the right thumb.",0
"An employee was on a catwalk five feet above the ground to see into a refrigerator trailer engine. As the employee was adjusting the belt on the engine, they fell off the catwalk to the concrete below, resulting in a left hip fracture. The employee was hospitalized.",1
"An employee was performing routine maintenance on a shot blaster machine when they slipped on machine residue and fell, striking their face/forehead on the motor cover. The employee sustained a right orbital fracture and a forehead laceration.",1
"On June 22, 2023, a crew was hiking and clearing trails while heading to an avalanche area to remove trees. The crew came across a tree that was 10-inches in diameter and suspended above ground across the trail. The injured employee used a hand saw to cut the tree. The tree was tangled with another tree, causing it to kick up and strike the injured employee. She fell to the ground and became pinned to a log, resulting in a puncture wound to the leg and lung damage that required hospitalization.",1
"The employee was standing next to and observing a forklift operator as they were moving a 3,500-pound hydraulic unit. The load shifted on the forks, causing the platform and unit to fall and strike the employee in the head. The employee became unconscious and sustained a head laceration from the forehead to the back of the head that required stitches and staples.",1
"On June 22, 2023, an employee was replacing a drop wire which connected a customer’s house to a mid-span attachment point on an aerial strand. The employee placed his ladder on the strand, connected the new drop wire onto the strand next to the old drop wire. He then cut the old drop wire near the strand. The strand lunged and the employee fell about 10 feet from the ladder to the ground. The employee was hospitalized with fractures to two ribs and an elbow.",1
"An employee was working on a yard truck to determine the cause of a leak. He was lowering the cab of the truck when the vehicle moved forward and ran him over, resulting in fractures to his jaw and ribs.",1
Two employees were preparing to repair a gluer machine and lifting a hydraulic jack into position. The injured employee's left thumb was pinched between the frame of the jack and the machine. The employee's thumb tip was amputated.,1
"An employee was on top of a flatbed trailer moving product around so a forklift operator could retrieve the client's property. The employee tripped over dunnage and fell off the trailer, resulting in rib fractures, disc injuries, and forehead lacerations.",1
"An employee was climbing an uprooted tree to clear branches away from electrical conductors. He was tied off to an adjacent tree with fall protection and a climb line. When the employee cut a tree limb, it released the tension in the limb, which struck him in the head and knocked him unconscious. The employee was hospitalized due to spinal edema.",1
"An employee developed back pain while setting up, taking down, and lifting tables and chairs. The employee was hospitalized for a back injury.",1
An employee was painting striped lines in a parking lot and became overheated. They were hospitalized due to heat exhaustion.,1
An employee was troubleshooting a problem with a bacon press machine when their left foot was crushed by the hydraulic ram.,1
An employee was traveling on a pallet jack down an aisle when the vehicle collided with another employee. The operator of the pallet jack sustained a left foot fracture.,1
An employee was using emery cloth to clean a mandrel in a machine when his glove was caught between the mandrel and a friction roller. The employee sustained broken fingers.,1
An employee was struck by a tug and suffered lacerations to the right and left calves.,1
"An employee was walking when they tripped and fell on the floor, resulting in a fractured femur.",1
An employee was setting up for the day and feeding the end of a hose in a machine when their glove became caught on the conveyor and pulled their hand in. The employee sustained hand and arm contusions and a finger fracture.,1
An employee was removing concrete formwork shoring that was holding up an 8 x 10 foot plywood table when they were struck by the table from above. The employee was hospitalized with a fractured lower vertebra.,1
An employee was loading trucks with small packages in a sorting area. The employee began to experience symptoms of dehydration and was hospitalized.,1
An employee was shearing off two inches of metal when the metal kicked up and struck his hand. The employee's left ring and middle fingertips were amputated.,0
"An employee was assisting in setting up a protective liner along a fence line in the football field track area. When the employee went to gain support on a stadium light tower, he was shocked by an electrical panel. The employee lost consciousness, fell to the ground, and sustained contusions to the right cheek from the fall.",1
"An employee was power washing a tank when the wand of the pressure washer turned toward his face. He was struck by the pressurized water and sustained injury to his face, eyes, and neck and possibly sustained the loss of vision to his left eye.",1
"An employee was using a grout hose to apply grout to waffle-to-waffle joint areas when the hose became obstructed and displaced. During troubleshooting, the hose shifted and struck the employee in the face, resulting in an injury to the upper cheek and mouth.",1
An employee was wiping cake batter off the valve assembly area in the cake depositing machine when the machine actuated and amputated their right index fingertip.,0
"Two employees were in a boat pulling a 45-pound anchor out of the water by the rope. The rope tightened and as the employees were attempting to create slack in the rope, the injured employee began to slip. His hand was caught between the rope and the inside of the platform boat, resulting in amputation of the right middle finger with bone loss.",0
An employee was clearing the access hole of a tank to loosen material. The employee's hammer was dropped into the airlock and their left hand was caught in the airlock. Three of the employee's left hand fingertips were amputated.,0
"On June 22, 2023, an employee was working at a power distribution substation. The employee set a metal reactor on a concrete base when their right hand was caught between the two objects, resulting in a partial amputation of the middle finger.",0
"An employee was removing a piece of plastic from a molding machine. The machine was activated, causing the molding pin to come down onto the employee's finger. The skin on her finger was removed and part of her finger was medically amputated.",1
An employee was descending a portable step ladder while working on a customer's refrigerator unit. The employee fell approximately 4 feet to the concrete floor and sustained a left leg fracture.,1
"A bricklayer had been working on a 5-foot scaffold frame, standing on a plank at a height of 3 feet. He was preparing to get off the scaffold when his foot slipped off the bottom rung, 1 foot off the ground. He fell to the concrete ground and suffered a broken left hip.",1
"An employee was putting a machine back in service from being locked and tagged out. When the employee restarted the machine, hot water and broken down woodchips began to flow from the drain valve. The employee sustained first-and second-degree burns to both lower legs.",1
"An employee had been working in a hot environment near a burn table. After walking down some steps and heading to the area where she kept her personal items, she fell backward and hit her head on the floor, suffering a skull fracture.",1
"Employees were conducting renovations to a boiler system in the basement of a school. Two employees were carrying out a 10-foot pipe when the injured employee lost his footing on a ramp. As he went to catch himself, the pipe landed on his right ring finger, resulting in a crush injury that required medical amputation of the top of the finger.",1
"An employee tripped and fell in the hallway, sustaining a fractured left arm.",1
An employee was guiding a freight truck when it pinned him against a wall. He suffered two broken ribs and a lacerated liver and was hospitalized.,1
"An employee was setting up an extension ladder. He slipped while bringing down the ladder and it fell and struck his wrist, resulting in a fracture.",1
"An employee was working on a label/tube machine when the shrink tubing became stuck while it was exiting the machine. As the employee went to remove the tubing, their fingertip was amputated by the machine blade.",1
"At 2:00 AM on June 23, 2023, an employee was using a torque gun to loosen bolts on a piece of equipment. While positioning the torque gun onto a bolt, the trigger on the torque gun was pressed. The metal arm of the torque gun moved and struck the employee's finger, causing an open fracture and amputation of his right middle fingertip.",0
An employee was replacing cutting blades in a shuttle machine when his left hand was pulled into the drive belt. His left middle finger was partially amputated.,0
"On June 23, 2023, an employee was lifting a compressor with a hoist when they lost their grip on the compressor. The compressor swung forward and crushed the employee's left middle finger against a steel rack. The injury required surgery.",1
"An employee was cleaning the pipe machine while waiting for a PVC pipe to come out of another machine. The pipe machine clamped down on his right index finger and crushed it, resulting in a partial amputation.",0
"An employee was undoing a kink in the mandrel press that she was operating. As the employee was pulling on the mandrel, it let loose and she fell to the concrete floor, fracturing her hip.",1
"An employee was moving freight when their left middle finger was caught between the freight and the load bar, resulting in a partial amputation.",0
"An employee was working at a depalletizer machine. He was straightening pallets when the pallet pusher activated, pinning his legs against a pallet. The employee sustained a fractured fibula in both legs.",1
"An employee was talking to a forklift operator when the forklift backed into the employee, resulting in a fractured ankle.",1
An employee was driving a forklift down an aisle. The employee's lower left leg was pinned and crushed between the forklift and a stationary railing.,1
An employee was walking to the breakroom when they were struck by a truck that was driving from the de-trash area to the washing area. The employee sustained six broken ribs and road rash.,1
"An employee was entering an office building in the morning. As she walked through the outside door, which had a self-closing hinge, it closed on her left index finger and amputated the tip.",0
An employee was running a block through a jointer when their left little finger was caught between the board and the jointer resulting in an amputation to the finger.,0
"An employee was returning from stocking cabinets in an adjacent unit when a stack of 11 pieces of drywall that was leaned vertically against a corridor wall fell, striking and pinning him. He sustained a possible left femur/hip fracture.
",1
"On June 23, 2023, at 5:00 PM, an employee was delivering mail when he was attacked by two dogs. As he hopped over a fence to escape, his right calf was pierced by the fence spikes. The employee was hospitalized.",1
"At approximately 9:20 p.m., an employee was walking to the back room to get the vacuum cleaner.  The employee twisted her left ankle, causing her to fall into the shelving to her left. The employee was hospitalized for a fractured femur and lacerations.",1
An employee was using wire cutters to cut a piece of 10-gauge wire. The wire slipped and struck the employee's right eye.,1
"A mechanic was adjusting the clutch on the transmission of a garbage truck. He was trying to get a wrench on the nut when his right hand became pinched between the wrench and the transmission bell housing, resulting in amputation of the middle fingertip.",0
"An employee was walking while using a leaf blower to clear leaves and debris from a patio. The patio pavement was wet and the employee slipped and fell, resulting in injuries to their left hip and leg.",1
"An employee was operating a baler machine. The door of the baler machine was stuck and the employee was using a steel pipe to tap it to get it to release. The employee was standing in front of the pipe when the door opened and hit the pipe, causing the pipe to strike the employee's head. The employee sustained a skull fracture.",1
An employee was climbing into the back of a conveyor truck when they hit their head on the conveyor belt and fell to the ground. The employee sustained a herniated disk in their back.,1
"On June 23, 2023, an employee was loading a truck with corn. Seeing that a gate was open and spilling out grain, the employee began climbing a fixed ladder on the grain silo to close the gate manually. The employee fell from the ladder about 10 to 15 feet up, landing on the ground below and suffering two broken wrists, a back strain, and a contusion to the right leg. The employee was hospitalized.",1
An employee was pushing a shopping cart when a car battery fell from the cart and fractured their right foot.,1
"An employee was climbing an extension ladder to retrieve a fiber splice when they fell approximately 10 feet. The employee sustained injuries to the right wrist, hips, and a foot.",1
"An employee and a co-worker were laying nets for compost. The employee's left hand was on a gear for the compost conveyor when the machine started, resulting in fingertip amputations of the ring and middle fingers.",1
"An employee was moving from an oven to behind a cut line to grab boxes. He tripped, fell, and broke a femur.",1
The injured employee was driving a stand up forklift in a warehouse when another forklift came down the aisle and ran over the employee's foot. The employee sustained fractures to the leg and three toes.,1
"An employee was finishing a roofing job when he fell from the 12-foot roof to the ground below. The employee sustained a concussion, fractured clavicle, and fractured right shoulder.",1
A security team member was monitoring visitors to ensure safety at a concert. The employee lost consciousness due to dehydration from the heat. The employee was hospitalized.,1
"An employee opened the door on the asphalt paver to show another employee a hydraulic leak. The fan behind the door pulled the door inward and the employee's finger was struck by the fan blades, resulting in amputation of their left index finger.",0
An employee was packing rolls of plastic trash bags when he became ill and developed breathing problems. He was hospitalized for heat stress.,1
An employee was frying chicken tenders in the deli area. She walked away from the fryer and tripped over a box of chicken. The employee fell and broke an arm.,1
"A postal service employee was walking through a plant when she tripped over a guardrail mounting bolt and fell to the floor. The employee sustained an injured right knee, which will require surgery.",1
"An employee was watching a crane load as it was being offloaded. His left hand was placed between the dunnage and the bracket to keep the cargo from striking the bracket, but the cargo shifted and his index and ring fingers were caught between the dunnage and the cargo. Both fingers were amputated.",1
An employee cleaning the deli department slipped on a wet spot while walking to the sink to rinse the rag she was using. The employee fell to the ground and suffered a possible hip fracture.,1
"On June 25, 2023, an employee was directing traffic after a car accident. A vehicle struck the employee after striking the employee's truck used to block traffic, causing both to impact a wall. The employee suffered multiple neck and lower back fractures as well as head and internal injuries. The employee was hospitalized.",1
"An employee was driving a forklift  and struck a pole, resulting in a broken left ankle.",1
"An employee was operating a wire calender machine and was trying to remove rubber off the impression roll when they were contacted by the wire going over the impression roll. The ring and little fingers on his right hand were amputated, and the middle finger was partially amputated at the middle knuckle.",1
"On June 25, 2023, an employee was carrying a 25-pound container of hot oil when the container slipped and fell to the floor. The employee was burned by the hot oil and was hospitalized.",1
"An employee was cleaning out an HVAC drain pipe that had drain solvent in it. When the employee opened the drain, solvent splashed in his face causing burns.",1
"An employee was assisting two zipliners who were stuck on the zipline course when another employee zipped down to help, colliding with the injured employee. The injured employee was knocked unconscious and suffered a concussion.",1
"An employee was working on the floor of a workover rig removing tubulars from the wellbore when they were struck by the power swivel, which pushed them into a handrail. The employee suffered a fractured collarbone.",1
"An employee was dumping frozen meat into a tote dumpster when a chunk of frozen meat came out and hit the rake. The rake fell and crushed her right little finger against the edge of the tote dumpster, resulting in an open fracture.",1
"On June 25, 2023, an employee was standing on the top rail of a guarded catwalk (3-4 feet) while reaching for a cable to connect to a ship. The employee lost his balance and fell, resulting in a collapsed lung, 3 broken ribs, and a right shoulder injury.",1
An employee was deflating a large plastic bag full of air when she slipped and fell to the ground. The employee's ankle was broken in three places; she was admitted for surgery.,1
"An employee was on a ladder that was leaned against a wire strap while installing cable service. The ladder slipped and the employee fell, resulting in a broken lower left leg.",1
"An employee was dislodging a metal coil from a forming machine using a piece of scrap steel. Their right thumb was pinched between the scrap piece and the coil, resulting in a partial amputation.",0
"An employee was watching a customer remove fire protection piping from a delivery truck when the piping shifted, fell, and struck the employee, resulting in a broken leg.",1
"An employee was using a vacuum to clean chips around the table of a drill press when their gloved left hand was caught in the drill bit, resulting in amputations to the index, middle, and ring fingertips.",0
"An employee was transporting a container across the street to the trash truck when he was struck by a vehicle. He sustained lower back bruising, a left leg fracture, and a laceration to the back of his head.",1
An employee was removing plastic from a blow molding machine when the machine cycled. The employee's right index finger was crushed and required amputation. ,0
"An employee was climbing a ladder when he slipped and fell to the floor, resulting in a wrist injury.",1
"An employee was working on an air-conditioning unit in an attic. As she was coming down the stairs, she slipped and fell 3 feet, resulting in a right wrist injury that required hospitalization.",1
"An employee was using a miter saw to cut wooden corner blocks. The employee placed his left hand on the wood to brace it and the blade contacted his finger, resulting in a partial amputation of his left thumb and a laceration to his left index finger.",0
An employee was walking across the facility floor when they tripped over pallet banding and fell to the ground. The employee was hospitalized with a broken hip.,1
"An employee was driving a utility vehicle tractor on the right side of the road to return to the farm after pulling plants. The vehicle drove onto a pile of asphalt with a white plastic covering, causing the vehicle to tip over. The handrail the employee was holding onto crushed her fingers. The employee suffered an open fracture to her left middle and ring fingers, that required partial amputation.",1
"An employee was loading a delivery truck when they fell from the lift gate to the ground, sustaining a head laceration and a concussion.",1
"An employee was operating a forklift in reverse. As she was turning from the main aisle to the side aisle, her right thumb was crushed between the vehicle and a rack and was lacerated.",1
"On June 26, 2023, an employee was washing dishes and turned to retrieve some dishes from a table to her side. As she turned back with the dishes, her right ankle popped and her left foot slipped, causing her to fall to the ground. The employee suffered a broken right ankle that required hospitalization and surgery.",1
An employee was operating a hot oil truck and installing a fitting on a string of pipe. Slips were stuck on the wiper plate and the wiper plate sheared off. The pipe then slipped down and crushed the employee's middle and ring fingertips on their left hand.,0
"An employee was standing on a brick surface that was elevated one foot to prime a pump. He turned and stepped backward, striking an 18-inch quarter turn ball valve handle. The employee suffered a lacerated liver and hematoma that required surgery.",1
An employee was inspecting a hole in a beam for burrs. The beam moved and the employee's right little fingertip was caught against another beam and amputated.,0
An employee was spotting for a hydrovac truck that was backing up. They were struck by the hydrovac truck and became caught against another truck. The employee sustained a lacerated spleen and a fractured hip.,1
An employee had abdominal cramps and felt ill after his work shift. He was hospitalized for a possible heat-related illness.,1
"An employee was connecting metal trusses to a metal-framed built structure. The employee stepped on the metal trusses, slipped, and fell approximately 9 feet to the concrete floor. The employee suffered a laceration to an arm and a head contusion that required hospitalization.",1
An employee was installing a new air-conditioning unit in the attic of a customer's home when he became ill. The employee was hospitalized due to heat exhaustion.,1
"An employee was removing a slab of wood from a chip conveyor when the wood became caught in the drive chain. The employee's hand was pinned against the conveyor support I-beam, resulting in a crushed right thumb and palm.",1
"On June 26, 2023, an employee was standing between a tilt-bed dump trailer and a tow vehicle while unloading the dump trailer. The trailer detached from the goose neck of the tow vehicle and shifted forward, striking and pinning the employee between the truck and trailer. The employee suffered a broken pelvis.",1
"An employee was walking when they stumbled over a box holder and fell, resulting in a broken femur.",1
"An employee was using a spray can when it poked him, causing paint to inject into his finger. The employee was hospitalized.",1
An employee was making routine adjustments to a machine when their left hand slipped and became caught in a gear. The employee's ring finger was partially amputated.,0
"An employee was replacing an old drop cord on a power pole. The employee was descending a ladder when they fell approximately 10 to 12 feet, resulting in a fractured pelvis.",1
"An employee was cleaning the work area when they tripped over a pallet and fell, resulting in a broken hip.",1
An employee was preparing pilings on a tied-off barge when they tripped and fell three feet from the barge to the ground. The employee sustained a lower right leg and ankle displacement.,1
"An employee was cleaning. She poured bleach down a soda fountain drain to unclog it and she immediately became short of breath. The employee suffered acute pneumonitis due to chemical fumes, acute hypoxemic respiratory failure, moderate persistent asthma with acute exacerbation, and shortness of breath.",1
An employee was adjusting their fingers on a brake press while a maintenance technician was adjusting the bowl feeder. The injured employee's left hand was caught in the point of operation and pierced.,1
"An employee was responding to an emergency call for a house on fire. The employee was rescuing caged birds from the fire, which resulted in a laceration to their left hand from a cage. The employee also suffered smoke inhalation.",1
"Two employees were building inlets for a drain. Employee 1 was cutting a two-by-four when the saw kicked back and struck employee 2, causing employee 2's right ring finger to contact the saw blade. The injured employee's right ring finger was amputated above the knuckle.",0
"An employee was using a crane to move a 6-by-60-foot bundle of rebar from a stock rack to production lines. The employee placed the crane remote on an adjacent bundle and was placing the wire sling under the suspended bundle when the remote control slid off the adjacent bundle and fell under the suspended bundle. The employee reached under the suspended bundle when the bundle tie wire suddenly broke. The bundle fell onto the employee's right hand, resulting in a crushed and fractured hand.",1
"An employee was working on the edge of a residential roof placing starter shingles while kneeling. When he stood up to change locations, he stepped on an air hose, causing him to slip and fall approximately 20 feet from the roof to the ground. The employee suffered fractures to the right heel and back.",1
"An employee was unloading a bar that weighed 2,300 pounds from a plating rack onto a polishing table. As the employee was rolling the bar down the table, his knee gave out and he fell to the floor. The employee's left tibia was fractured.",1
"On June 26, 2023, an employee was looking under a caustic tank to determine whether the bolts on the flange would need to be cut off. The tank overflowed and sodium hydroxide solution contacted the employee, resulting in chemical burns to the employee's eyes, face, neck, shoulder, and right arm. The employee was hospitalized.",1
An employee was clearing material from the belt of a dough roller and adjusting the belt tensioner when their right middle finger was amputated between the fingertip and the first knuckle.,1
"An employee was working out of a scissor lift to rewire a circuit in a ceiling. The employee came in contact with a 277-volt live wire and was shocked, resulting in a burn to their right hand.",1
"Employee 1 was making hay bales when the machine jammed. Employee 1 asked employee 2 for assistance. A lever was actuated causing the gate to move while employee 1 was in the machine. Employee 1 was crushed by the baler, resulting in fractured ribs.",1
An employee was lifting boxes and pails when their back began to hurt. They were hospitalized for two slipped discs and inflammation.,1
An employee had been spot sanding steel at the ground level of a test stand structure. The employee tripped over a curb or a piece of pipe that was sticking out of the structure. He fell and struck his head on structural steel and became unconscious. The employee sustained a concussion and a 2-inch laceration to the side of the head above the ear. The employee also had a seizure.,1
"A temporary employee was picking up a metal bed frame and throwing it in the back of a garbage truck. The bed frame bounced off the truck and struck the left side of the employee's head, resulting in a concussion and a laceration.",1
"An employee was using a brake press to bend a part. The part moved and caught the employee's hand, pulling it into the gap between the part and the machine. The employee's right middle finger was amputated.",0
"An employee was adjusting a load on a crane in order to balance it when the load shifted onto their left index finger, resulting in amputation.",1
An employee was running the edge banding machine when she noticed it was not centered. The employee went to clean the machine and her left middle finger was amputated. ,0
"An employee was carrying a pressure-treated 2x6 board while plating a foundation. The employee put the board on an anchor bolt when a 3-inch sliver of wood got caught in his hand, resulting in a punctured tendon.",1
An employee had an asthma attack after a coworker sprayed a fragrance in the area and was hospitalized.,1
"On June 27, 2023, at 2:30 p.m., a pilot was returning after a test flight of an F-35 aircraft. After aircraft recovery, the pilot exited the aircraft via the integrally mounted aircraft access ladder. During his descent, he tripped on the third ladder step and fell approximately 6 feet, resulting in a dislocated left shoulder, a compound dislocation of the left elbow, and stable fractures of the left 7th and 8th ribs.",1
"An employee was delivering digital orders in a parking lot when they began to suffer heat-related symptoms, resulting in hospitalization.",1
"An employee was on a podium ladder using a tool to grind a wall. The employee fell 6 feet onto stacked lumber materials and steel bracing channels, resulting in right hip and thigh pain.",1
"An employee was removing a door from a tractor-trailer when the door fell onto his right knee, resulting in an injury that required surgery.",1
"An employee was working on a roof installing solar panels when they began to feel ill, resulting in hospitalization due to dehydration.",1
An employee's thumb tip was amputated in a chain and sprocket.,0
"On June 27, 2023, an employee was getting off a forklift when another forklift ran over his right foot, resulting in compound fractures to his right foot and ankle.",1
An employee sustained toe fractures after a floor plate that was being lifted detached from the chain and fell.,1
"An employee was on an elevated platform while using a peavy to separate two 16-foot logs that had doubled up on a transfer chain. He attached the peavy to the top log and was leaning back using his body weight as leverage to change the position of the log. As the employee was applying leverage with the peavy to separate the two logs, the peavy slipped off the log and the employee fell backward over the side of the elevated platform. The employee fell approximately 13 feet and suffered fractures to his skull, clavicle, and sternum.",1
An employee was moving a ladder that was located in front of tables when his left foot was caught underneath a table and crushed. The employee's left foot was surgically amputated.,0
"An employee was installing a rake arm to a drive shaft of a clarifier and tightening bolts on the clarifier rake arm. The shaft separated from the expansion joint, causing the unit to drop approximately 3 feet and strike the employee on the top of their right foot. They sustained a fracture.",1
"An employee was using an overhead magnetic crane to lift a 1,200-pound I-beam from a rolling table. As the beam cleared the roller table, the lower end struck the floor, causing the crane to lose its magnetic lock on the beam. The beam fell and struck the employee on both legs above the knees, resulting in lacerations to both knees. The employee required surgery to repair tendon and ligament damage to the left knee.",1
"An employee was rolling dough when her right ring finger got stuck in a dough presser, resulting in a partial amputation.",1
"An employee was prying the truck bar of a company flatbed truck. The truck bar slipped free, causing the employee to fall approximately 2 feet to the ground, landing on his left hip. The employee sustained a hip fracture.",1
"An employee's right middle finger was caught between a bundle of rebar, resulting in amputation.",0
An employee was fixing a cable line when they began feeling ill and experiencing abdominal & leg cramps due to possible heat stress. The employee was hospitalized that evening for dehydration.,1
An employee was operating a stand-up forklift in a warehouse when they struck aisle racking and their thumb was crushed between the forklift and the racking and broken.,1
"An employee was removing drywall and as he unscrewed it, the drywall slipped down. The employee's left index finger was pinched between the drywall and the rail of the scissor lift, resulting in a fingertip amputation.",0
"An employee was inside of a permanent filter media pod hydroblasting the filter media with an 8,000 psi wand. The employee lost their balance and the water from the wand made contact with their foot, resulting in a puncture wound.",1
An employee was working on a scaffolding platform cleaning grout. He fell off the platform to the ground and was hospitalized with a leg injury.,1
An employee was using a wrench to remove a bolt and a disconnect device from a switchgear when an arc flash occurred. The employee sustained burns to their arm and face.,1
An employee was pulling a line through a light pole when it contacted an uninsulated line. The employee was shocked and sustained burns that required hospitalization.,1
An operator was cleaning a flexographic press machine with a rag when the rag got caught and pulled his arm into the machine. The employee suffered a muscle injury and a partial degloving of the right forearm.,1
An employee was grinding chains for a customer when the grinder slipped and cut his left index finger at the first knuckle. The employee was hospitalized.,1
An employee was climbing a fixed ladder to access a roof when they fell 19 feet to the ground below. They sustained a lower back injury.,1
An employee was on the second rung of a ladder turning a wrench on a tight pipe. The wrench slipped and the employee fell off the ladder and onto the floor. The employee sustained a left elbow dislocation and possible fracture.,1
"An employee was operating a standup lift truck to place material into a rack. As the employee backed away, the vehicle collided with a rack, resulting in a left arm fracture/laceration.",1
"An employee fell approximately 30-35 feet from a zipline, resulting in a fracture to the left heel and a lumbar vertebra that required surgery.",1
"An employee climbed up a truck to repair a loose tarp when they slipped and fell on the truck bed, resulting in a laceration to the left side of their head.",1
"An employee was walking in the cafeteria when she tripped and fell onto her left knee, resulting in an injury that required surgery.",1
"An employee was using a crane to help load material. A cable on the hoist was not distributing weight evenly and the employee noticed that the chain was stuck between the cables. As he went to remove the chain and push the hook, his finger was caught and amputated.",0
"An employee was helping with tree cutting operations on the ground while another employee trimmed trees with a chainsaw. The chainsaw deflected, striking the injured employee in the right leg below the knee cap and causing a laceration.",1
An employee was hooking up a hose when the hose fell and crushed their fingertip.,1
An employee was completing an inspection of a waste truck when they lost consciousness. The employee was hospitalized for possible heat illness.,1
"Two employees were in a utility task vehicle (UTV). The UTV rolled over onto the passenger side and struck the injured employee's arm. The employee sustained a broken elbow, dislocated shoulder, and a laceration to his elbow.",1
"An employee was erecting a scaffold when he fell to the ground and landed on his feet, resulting in a fractured right leg and an injured pelvis.",1
"An employee was operating an excavator inside the steel mill's melt shop. The excavator drove over a piece of steel that became trapped beneath the tracks of the excavator. As the employee drove forward, the piece of steel broke the front windshield and amputated the employee's left ring fingertip.",0
An employee was stepping up to enter a building through an exterior doorway when her left foot was caught on the door flashing. The employee fell to the floor and sustained a left fibula fracture.,1
An employee was turning off a lever-style breaker in a wind turbine when an arc flash occurred. The employee was hospitalized with burns to the right hand.,1
"An employee was removing a bearing from a shaft using a hammer and punch when metal from the bearing or punch splintered and became airborne. Metal shrapnel struck the employee in the left neck, resulting in a puncture wound.",1
An employee was using a forklift to load material into a trailer when the trailer pulled away from the dock. The forklift and the employee dropped from the dock and the impact from the drop caused a vertebral fracture and lung bruising.,1
"An employee was lifting an air conditioning unit off a flatbed truck with a forklift. As the employee was placing a piece of plywood underneath the unit to give it some height so that the forks of the forklift could reach, the unit slipped and caught his right thumb, resulting in a partial amputation of the distal tip of the finger including the fingernail.",0
"An employee was on a baker scaffold that was seven feet high when they fell to the ground, sustaining a left hip and wrist fractures.",1
"An employee was pulling adhered roofing material off a roof when the material snapped, causing the employee to lose balance and step off the roof. The employee fell to the ground and sustained  left tibia and ankle fractures.",1
"An employee was operating a crane to lift aluminum logs when their hand was caught between the logs, resulting in a crush injury/avulsion to multiple fingers on the right hand. The employee was hospitalized.",1
An employee was walking around a poly cart to attach the hitch to another cart when she tripped on a piece of nylon twine that was tied to the poly cart. The employee fell to the concrete floor and sustained a displaced femoral neck fracture of the left hip.,1
"An employee was transitioning a bolt keg from a hand dolly to storage when the metal can began to roll. The can impacted a stored can and the employee's right index finger was caught between the two cans, resulting in a fingertip amputation.",0
"An employee was using a grinder on a metal baler when the grinder became caught on the employee's pants and fell, striking them in the lower leg. The employee sustained lacerations to multiple tendons that required surgery.",1
"An employee was putting tie down straps on the boom of a crane. After doing so, he jumped down from the side of the truck bed and sustained multiple fractures in the heel of his foot.",1
An employee was hospitalized for dehydration.,1
"An employee was under a suspended load disassembling a form. As the last bolt was removed, a section of the form dropped from the crane, striking the employee in the back. They sustained fractures to numerous vertebrae.",1
"An employee was offloading sulfuric acid from his truck through a hose. When the employee removed the hose, acid sprayed onto his chest, resulting in chemical burns.",1
"On June 28, 2023, at 12:00 p.m., an employee removed a conveyor from a mezzanine. The employee was looking up to the next level when they fell to the lower level through the opening created when the conveyor was removed. The employee contacted steel from the removed frame, resulting in a cut on their back.",1
"An employee was on a first-floor roof cleaning windows with a pole when he fell through a skylight approximately 15-20 feet to the ground, resulting in a fractured left hip and fractured vertebrae in his neck.",1
An employee was sitting in a vehicle at a border checkpoint when the vehicle was struck by an oncoming pickup truck. The employee sustained a concussion as well as rib and vertebral fractures and was hospitalized.,1
"On June 29, 2023, an employee was working near the edge of the carrier/woody pit located in the rod mill reform area of the plant. The employee removed banding from around compressed steel. Due to the release of tension, the steel pushed the employee, causing him to fall approximately 8 feet into the pit. The employee was hospitalized with a fractured right heel and required surgery.",1
"A driver was on a flatbed or delivery truck, moving pallets to make room for addition freight. He turned to his left to step off the truck and fell, landing with his left side on the ground and sustaining a rib injury.",1
"An employee was cutting a branch on a downed power line when tension in the power line released, causing it to snap up and strike the employee in the chest and neck area. The employee suffered internal chest and throat trauma.",1
"An employee was working near an aircraft while a wasp was flying near the employee. As he was walking backward away from the wasp, the employee tripped and fell to the concrete floor, resulting in a left elbow fracture.",1
An employee was cutting a cable on the chop cut machine when a piece of cable became stuck in the grippers. The employee went to remove the cable when the cutter came down and amputated their right index fingertip.,0
"An employee was descending a step ladder and missed the last two steps, causing them to fall to the ground and sustain a left hip fracture.",1
An employee was setting concrete forms when they became ill. The employee was hospitalized for heat stress.,1
"A piece of granite leaning against a wall fell on an employee, fracturing his left leg.",1
"An employee was conducting welding operations when they became ill due to dehydration, resulting in hospitalization.",1
"An employee was observing a training exercise, when they were struck by a forklift in the right lower hip. The employee was hospitalized.",1
"An employee was in the mixing room when an asphalt truck arrived to be unloaded. The employee began the procedure for unloading the truck and went outside to the truck to ensure the valve was closed, remove the cap, and attach a hose from the truck to the tanks outside of the mixing room. The cap came off the truck due to pressure behind it and sprayed the employee with the hot asphalt. They sustained burns to the hands, arms, torso, and upper legs.",1
"An employee was cleaning a hitch pin on a manual lathe using a terrycloth rag. The rag was pulled into the spinning three-jaw chuck, pulling his left arm into the machine. The employee sustained an open left arm fracture three inches above the wrist.",1
"An employee was using a grinder when the material slipped and the employee's finger contacted the grinder wheel, resulting in a fingertip amputation.",0
An employee sustained a gunshot wound to the abdomen when a firearm was discharged by a co-worker.,1
An employee was holding a door open for another employee when their little finger was partially amputated in the door jam as it was closing.,1
An employee was adjusting the vacuum control valve on the right side of an A-frame arm when their finger was caught between the vent blow pipe and the control valve. The employee's right middle finger was partially amputated.,0
An employee was attempting to drive route for deliveries when they began to feel ill and were hospitalized due to heat exhaustion.,1
"An employee was unloading a pallet from a trailer that was set on an incline. As they were maneuvering backward, they fell off the liftgate to the ground and lost control of the pump jack. The employee sustained injuries to the head, face, collarbone, ribs, and hand.",1
"An employee was working at the furnace conveyor line when the guard was knocked off the machine. The employee went to retrieve the metal guard and his right-hand fingers contacted the rotating chain, resulting in two fingertip amputations.",0
"An employee was working on the dump throat of a box fill station. As the employee went to clear a jam, their hand contacted the rotating blades of the fill motor, resulting in a left middle finger amputation.",1
"An employee was replacing a broken punch pin on an assembly machine. While installing the punch pin plunger, the machine was jogged, causing the employee's fingertip to become pinched between the wedge block and the roller. Their left middle finger was amputated above the first joint.",0
"An employee was loading empty cardboard cases/boxes onto a conveyor. While turning to retrieve an additional case, the employee tripped over a case on the ground and fell, resulting in a right wrist fracture.",1
"Employees were putting up traffic control signs when a car stopped on the interstate. The car was then struck by a semi-truck, forcing the car into the injured employee. They sustained a shoulder fracture.",1
"An employee was walking in her office when she tripped on a pile of papers on the floor and fell, resulting in a right humeral neck fracture.",1
An employee was pulling a cart toward himself when the cart fell on him. The employee sustained L1 and L3 end-plate fractures and a bruised bladder that required hospitalization.,1
"An employee was gathering a sample of oil. Once the sample was gathered, the employee stepped over a retaining wall and slipped, falling back into the retaining area. The employee contacted the hot oil and sustained burns to the lower left calf and hands.",1
"An employee was making a delivery to a jobsite. He got out of his truck to assist the client in removing pipes from the trailer using a forklift. When assisting to maneuver the forks into place, the employee's left hand was crushed between the trailer and forklift forks. He sustained a ring finger fracture and amputation of the little finger to the first knuckle.",1
"An employee was removing a 60-pound brake drum from a parts rack at chest height when it fell onto his right foot, resulting in a broken foot.",1
"An employee was removing extra foam from the mold in the machine when the machine opened automatically, amputating his middle finger.",1
"An employee had completed his morning duties which included installation and putting parts together. The employee was in a car, waiting to go to lunch with a coworker, when they began to exhibit symptoms of heat stroke. The employee was hospitalized for a heat-related illness.",1
"An employee was freeing a conveyor actuator when it activated, catching their finger between the actuator and bottom plate resulting in amputation above the fingernail.",0
An employee was at a customer's house when they began feeling unwell; the employee was hospitalized for a heat-related illness.,1
"An employee and a co-worker put a 16-foot extension ladder on top of a baker scaffold to paint on a wall in a foyer approximately two stories high. As the employee was standing on top of the ladder, it shook the scaffold and the ladder then toppled over, causing the employee to fall head first onto the tiled floor and sustain a head injury.",1
"An employee was using a cutter machine when their fingers became caught in the machine, resulting in the amputation of four right-hand fingers.",1
An employee was cleaning the carriage of a paving machine. He raised the lever for the carriage and his right hand was crushed between the carriage and frame.,1
An employee was driving a tug when they fell from the tug and subsequently struck by the tug. The employee sustained a laceration along the right calf.,1
"An employee was adjusting a buggy on rollers/tracks when his fingertip was caught between the roller and buggy, resulting in a fingertip amputation.",0
"An employee was walking when she tripped over a pallet and fell to the ground, resulting in a right arm injury.",1
"An employee was walking in a laboratory when they tripped and fell to the ground. The employee was hospitalized with a dislocated right knee, which required surgery to repair.",1
An employee was part of a team welding on machinery at a site when they began to experience symptoms of heat stress. The employee returned to office and was hospitalized.,1
"An employee was making a delivery when they fell from the back of the delivery truck to the ground, resulting in a broken left hip.",1
An employee was operating a stand-up reach lift when his foot became pinned against a safety rail. The employee was hospitalized with foot fractures that required surgical amputation of his toes.,1
"An employee was delivering products on a hot day when they began to feel ill and lightheaded, resulting in hospitalization for dehydration.",1
"An employee was using a band saw to cut beef into one-inch steaks. As he was adjusting an uneven portion of meat, the employee's left middle finger contacted the blade, resulting in a fingertip amputation.",0
"An employee was transferring product from a semi-trailer to a box truck cargo area. The employee fell from a trailer to the ground, resulting in a broken left hip and wrist.",1
An employee was working when she began experiencing symptoms of dehydration from heat exposure. She was hospitalized.,1
"An employee was moving 10-foot stock tanks when three of them fell, knocking the employee to the ground. The employee was hospitalized with broken bones in both legs.",1
An employee suffered a finger amputation while operating a machine.,0
An employee was working in the formation area putting caps on batteries when he began exhibiting heat stress symptoms and was hospitalized.,1
An employee was walking through the parking lot to work when a vehicle pulled into the parking lot and struck the employee. They fell to the ground and sustained a head injury.,1
"An employee was working on a trailer performing routine maintenance. While climbing down the 13-15-foot ladder, the employee fell to the ground and sustained a head injury that required hospitalization.",1
An employee was observing the lugs running through the lug and drill tap machine. A lug became jammed in the pusher area of the machine and the employee went to clear it when their right index fingertip was caught in the pusher and amputated.,1
"An employee was guiding the front of a cart that was carrying a truck body across a service pit while two other employees pushed from the rear. The employee was holding the tongue with a hitch attachment. As he ascended the stairs, his left little finger was caught between the hitch and the side of the top step. The employee's little finger was severed between the first and second knuckle.",0
"An employee was going to check on an area of a roof that needed patching when his feet were caught in the safety stanchions on the roof. He tripped and fell on the roof, resulting in three fractured ribs.",1
An employee was getting wood out of a shaver box when his foot was caught in the shaver head. Five of the employee's toes on the right foot were amputated.,1
"An employee was using a vacuum truck to clean a 6-inch pipe. The hose and water, with approximately 1500-1600 PSI, struck the employee in the face, resulting in the loss of an eye and skull fractures.",1
"On June 30, 2023, an employee working in a kitchen slipped on a wet floor and fell. The employee was hospitalized with a broken hip.",1
"An employee was removing aluminum filler forms from a trailer when one of the forms fell and struck the employee's right thumb, resulting in a partial finger amputation.",0
"An employee was running doors through an edging machine. Their fingernail and some skin on the right middle finger was lost, requiring surgical amputation at the first knuckle. The right index finger was also lacerated.",1
"A law enforcement agent was pursuing a suspect on foot when they suffered a head-on collision with the suspect, resulting in a brain bleed and a concussion that required hospitalization.",1
An employee was in front of a skid loader that was hauling a tree to be planted. The employee was holding the tree so it wouldn't fall over when his leg and foot were run over by the skid loader and fractured.,1
"An employee was unloading a delivery truck when they fell into the gap between the bed of the truck and the loading dock platform, sustaining a right knee dislocation.",1
An employee was moving materials using an all-terrain vehicle when the vehicle struck an overhead boom. The employee's head struck against the steering wheel and he was ejected to the concrete ground. The employee was hospitalized with a head injury.,1
An employee was loading a wooden utility pole onto a digger derrick. A pole piece came free when it was under tension and swung into the employee's lower legs. The employee sustained three fractures to the left ankle as well as one right ankle fracture.,1